Powered by Deep Web Technologies
Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Pre-feasibility power generation study for the Magadi Soda Company, Magadi, Kenya  

SciTech Connect (OSTI)

The purpose of this report is to: (a) review the extensive published and unpublished literature on the geochemistry, hydrology and geology of Lake Magadi, Kenya, and its associated hot springs; (b) based on this review of field visits, estimate the temperature in the geothermal reservoir beneath the lake; and (c) from this, develop a plan to determine the potential for the development of geothermal electric power at Lake Magadi. 6 refs., 9 figs., 2 tabs.

Not Available

1989-01-01T23:59:59.000Z

2

Solar system fault detection  

DOE Patents [OSTI]

A fault detecting apparatus and method are provided for use with an active solar system. The apparatus provides an indication as to whether one or more predetermined faults have occurred in the solar system. The apparatus includes a plurality of sensors, each sensor being used in determining whether a predetermined condition is present. The outputs of the sensors are combined in a pre-established manner in accordance with the kind of predetermined faults to be detected. Indicators communicate with the outputs generated by combining the sensor outputs to give the user of the solar system and the apparatus an indication as to whether a predetermined fault has occurred. Upon detection and indication of any predetermined fault, the user can take appropriate corrective action so that the overall reliability and efficiency of the active solar system are increased.

Farrington, R.B.; Pruett, J.C. Jr.

1984-05-14T23:59:59.000Z

3

Solar system fault detection  

DOE Patents [OSTI]

A fault detecting apparatus and method are provided for use with an active solar system. The apparatus provides an indication as to whether one or more predetermined faults have occurred in the solar system. The apparatus includes a plurality of sensors, each sensor being used in determining whether a predetermined condition is present. The outputs of the sensors are combined in a pre-established manner in accordance with the kind of predetermined faults to be detected. Indicators communicate with the outputs generated by combining the sensor outputs to give the user of the solar system and the apparatus an indication as to whether a predetermined fault has occurred. Upon detection and indication of any predetermined fault, the user can take appropriate corrective action so that the overall reliability and efficiency of the active solar system are increased.

Farrington, Robert B. (Wheatridge, CO); Pruett, Jr., James C. (Lakewood, CO)

1986-01-01T23:59:59.000Z

4

Arc fault detection system  

DOE Patents [OSTI]

An arc fault detection system for use on ungrounded or high-resistance-grounded power distribution systems is provided which can be retrofitted outside electrical switchboard circuits having limited space constraints. The system includes a differential current relay that senses a current differential between current flowing from secondary windings located in a current transformer coupled to a power supply side of a switchboard, and a total current induced in secondary windings coupled to a load side of the switchboard. When such a current differential is experienced, a current travels through a operating coil of the differential current relay, which in turn opens an upstream circuit breaker located between the switchboard and a power supply to remove the supply of power to the switchboard.

Jha, Kamal N. (Bethel Park, PA)

1999-01-01T23:59:59.000Z

5

Arc fault detection system  

DOE Patents [OSTI]

An arc fault detection system for use on ungrounded or high-resistance-grounded power distribution systems is provided which can be retrofitted outside electrical switchboard circuits having limited space constraints. The system includes a differential current relay that senses a current differential between current flowing from secondary windings located in a current transformer coupled to a power supply side of a switchboard, and a total current induced in secondary windings coupled to a load side of the switchboard. When such a current differential is experienced, a current travels through a operating coil of the differential current relay, which in turn opens an upstream circuit breaker located between the switchboard and a power supply to remove the supply of power to the switchboard. 1 fig.

Jha, K.N.

1999-05-18T23:59:59.000Z

6

Row fault detection system  

DOE Patents [OSTI]

An apparatus, program product and method check for nodal faults in a row of nodes by causing each node in the row to concurrently communicate with its adjacent neighbor nodes in the row. The communications are analyzed to determine a presence of a faulty node or connection.

Archer, Charles Jens (Rochester, MN); Pinnow, Kurt Walter (Rochester, MN); Ratterman, Joseph D. (Rochester, MN); Smith, Brian Edward (Rochester, MN)

2012-02-07T23:59:59.000Z

7

Automated Fault Location In Smart Distribution Systems  

E-Print Network [OSTI]

of utilizing a suitable fault location method. As distribution systems are gradually evolving into smart distribution systems, application of more accurate fault location methods based on gathered data from various Intelligent Electronic Devices (IEDs...

Lotfifard, Saeed

2012-10-19T23:59:59.000Z

8

Modeling and Measurement Constraints in Fault Diagnostics for HVAC Systems  

E-Print Network [OSTI]

in Fault Diagnostics for HVAC Systems Massieh Najafi 1 ,tools for determining HVAC diagnostics, methods todetect faults in HVAC systems are still generally

Najafi, Massieh

2010-01-01T23:59:59.000Z

9

Development of secondary faults between en echelon, oblique-slip faults: examples from basement controlled, small-fault systems in the Llano Uplift of central Texas  

E-Print Network [OSTI]

between and oriented oblique to the bounding faults. With increasing displacement on the bounding faults, the system of secondary faults evolves from an Elementary to a Compound, to an Advanced geometry, which includes the formation of secondary... to the primary faults. Synthetic faults form interior to and ahead of the bounding faults, increasing the effective overlap. Displacements on antithetic faults are directly related to changes in displacement on associated bounding faults. Additionally...

Hedgcoxe, Howard Reiffert

2012-06-07T23:59:59.000Z

10

Robust model-based fault diagnosis for chemical process systems  

E-Print Network [OSTI]

diagnosis systems, which use limited information about the process model to robustly detect, discriminate, and reconstruct instrumentation faults. Broadly, the proposed method consists of a novel nonlinear state and parameter estimator coupled with a fault...

Rajaraman, Srinivasan

2006-08-16T23:59:59.000Z

11

Physiochemical Evidence of Faulting Processes and Modeling of Fluid in Evolving Fault Systems in Southern California  

SciTech Connect (OSTI)

Our study targets recent (Plio-Pleistocene) faults and young (Tertiary) petroleum fields in southern California. Faults include the Refugio Fault in the Transverse Ranges, the Ellwood Fault in the Santa Barbara Channel, and most recently the Newport- Inglewood in the Los Angeles Basin. Subsurface core and tubing scale samples, outcrop samples, well logs, reservoir properties, pore pressures, fluid compositions, and published structural-seismic sections have been used to characterize the tectonic/diagenetic history of the faults. As part of the effort to understand the diagenetic processes within these fault zones, we have studied analogous processes of rapid carbonate precipitation (scaling) in petroleum reservoir tubing and manmade tunnels. From this, we have identified geochemical signatures in carbonate that characterize rapid CO2 degassing. These data provide constraints for finite element models that predict fluid pressures, multiphase flow patterns, rates and patterns of deformation, subsurface temperatures and heat flow, and geochemistry associated with large fault systems.

Boles, James [Professor

2013-05-24T23:59:59.000Z

12

Fault Tolerant Oxygen Control of a Diesel Engine Air System  

E-Print Network [OSTI]

Fault Tolerant Oxygen Control of a Diesel Engine Air System Rainer Nitsche Matthias Bitzer control problem of a Diesel engine air system having a jammed Exhaust Gas Recirculation (EGR) valve of the air system. Keywords: Fault tolerant control, Diesel engine, Air system, Model-based trajectory

Paris-Sud XI, Université de

13

Identifying Efficiency Degrading Faults in Split Air Conditioning Systems  

E-Print Network [OSTI]

Studies estimate that as much as 50% of packaged air conditioning systems operate in faulty conditions that degrade system efficiency. Common faults include: under- and over-charged systems (too much or too little refrigerant), faulty expansions...

Terrill, T. J.; Brown, M. L.; Cheyne, R. W. Jr.; Cousins, A. J.; Daniels, B. P.; Erb, K. L.; Garcia, P. A.; Leutermann, M. J.; Nel, A. J.; Robert, C. L.; Widger, S. B.; Williams, A. G.; Rasmussen, B. P.

2013-01-01T23:59:59.000Z

14

All-to-all sequenced fault detection system  

DOE Patents [OSTI]

An apparatus, program product and method enable nodal fault detection by sequencing communications between all system nodes. A master node may coordinate communications between two slave nodes before sequencing to and initiating communications between a new pair of slave nodes. The communications may be analyzed to determine the nodal fault.

Archer, Charles Jens (Rochester, MN); Pinnow, Kurt Walter (Rochester, MN); Ratterman, Joseph D. (Rochester, MN); Smith, Brian Edward (Rochester, MN)

2010-11-02T23:59:59.000Z

15

Online Fault Detection and Tolerance for Photovoltaic Energy Harvesting Systems  

E-Print Network [OSTI]

and weather conditions (e.g., clouds), and the output power of PV systems is directly dependent on solar and mitigate the output power shortage under low levels of solar irradiance. Moreover, PV panels exhibit highly fault detection and tolerance. Our fault detection and tolerance technique reduces output power

Pedram, Massoud

16

Experimental characterization of faults on low-voltage systems  

E-Print Network [OSTI]

arcing ground faults '10'. The first scheme is very similar to the Ground Sensor Protection scheme described in i8j. The second scheme employs the fact that the voltage waveshape at the 1'suit point is flat topped. Harmonic analysis shows that... value when an arcing fault takes place. Continued presence of a, relatively high third- harmonic component in the bus voltage is a definite sign that there is an arcing fault in the system, Kusko and Peeran recommended the use of a, third harmonic...

Ahmed, Jubayer

1992-01-01T23:59:59.000Z

17

All row, planar fault detection system  

DOE Patents [OSTI]

An apparatus, program product and method for detecting nodal faults may simultaneously cause designated nodes of a cell to communicate with all nodes adjacent to each of the designated nodes. Furthermore, all nodes along the axes of the designated nodes are made to communicate with their adjacent nodes, and the communications are analyzed to determine if a node or connection is faulty.

Archer, Charles Jens; Pinnow, Kurt Walter; Ratterman, Joseph D; Smith, Brian Edward

2013-07-23T23:59:59.000Z

18

Condition Assessment and Fault Prognostics of Microelectromechanical Systems  

E-Print Network [OSTI]

Condition Assessment and Fault Prognostics of Microelectromechanical Systems K. Medjaher , H. Skima-Mechatronic Systems Department 24, rue Alain Savary, 25000 Besançon, France Abstract Microelectromechanical systems to microelectromechanical systems (MEMS), since these latter devices undergo failures during their life- time. However

Paris-Sud XI, Université de

19

Power system fault analysis based on intelligent techniques and intelligent electronic device data  

E-Print Network [OSTI]

This dissertation has focused on automated power system fault analysis. New contributions to fault section estimation, protection system performance evaluation and power system/protection system interactive simulation have been achieved. Intelligent...

Luo, Xu

2007-09-17T23:59:59.000Z

20

Fault Current Issues for Market Driven Power Systems with Distributed Generation  

E-Print Network [OSTI]

1 Fault Current Issues for Market Driven Power Systems with Distributed Generation Natthaphob of installing distributed generation (DG) to electric power systems. The proliferation of new generators creates Terms--Distributed / dispersed generation, power distri- bution, power system protection, fault

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

An expert system for fault section diagnosis of power systems using fuzzy relations  

SciTech Connect (OSTI)

This paper proposes an expert system using fuzzy relations to deal with uncertainties imposed on fault section diagnosis of power systems. The authors build sagittal diagrams which represent the fuzzy relations for power systems, and diagnose fault sections using the sagittal diagrams. Next, they examine the malfunction or wrong alarm of relays and circuit breakers based on the alarm information and the estimated fault section. The proposed system provides the fault section candidates in terms of the degree of membership and the malfunction or wrong alarm. An operator monitors these candidates and is able to diagnose the fault section, coping with uncertainties. Experimental studies for real power systems reveal usefulness of the proposed technique to diagnose faults that have uncertainty.

Cho, H.J. [LG Electronics Research Center, Seoul (Korea, Republic of); Park, J.K. [Seoul National Univ. (Korea, Republic of). Dept. of Electrical Engineering

1997-02-01T23:59:59.000Z

22

Fracture surface energy of the Punchbowl fault, San Andreas system  

E-Print Network [OSTI]

Fracture surface energy of the Punchbowl fault, San Andreas system Judith S. Chester1 , Frederick M. Chester1 & Andreas K. Kronenberg1 Fracture energy is a form of latent heat required to create weakening1­3 . Fracture energy has been estimated from seismological and experimental rock deformation data4

Chester, Frederick M.

23

Combining Tools for the Verification of FaultTolerant Systems  

E-Print Network [OSTI]

and verification of fault­tolerant systems according to the invent&verify paradigm. Our method is based on the CSP specifications (CSP process terms), refinement relations or combinations of these three description formalisms specification paradigms ac­ cording to the specific needs of each development step is essential to cope

Peleska, Jan - Fachbereich 3

24

Wind Energy Conversion Systems Fault Diagnosis Using Wavelet Analysis  

E-Print Network [OSTI]

Wind Energy Conversion Systems Fault Diagnosis Using Wavelet Analysis Elie Al-Ahmar1,2 , Mohamed El, induction generator, Discrete Wavelet Transform (DWT), failure diagnosis. I. Introduction Wind energy the condition of induction machines. Fig. 1. Worldwide growth of wind energy installed capacity [1]. 1 E. Al

Paris-Sud XI, Université de

25

A CONTROLLER FOR HVAC SYSTEMS WITH FAULT DETECTION CAPABILITIES BASED ON SIMULATION MODELS  

E-Print Network [OSTI]

1 A CONTROLLER FOR HVAC SYSTEMS WITH FAULT DETECTION CAPABILITIES BASED ON SIMULATION MODELS T. I describes a control scheme with fault detection capabilities suitable for application to HVAC systems as a reference of correct operation. Faults that occur in the HVAC system under control cause the PI

26

E-Print Network 3.0 - active fault system Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: -8141(95)00105-0 Experimental modeling of extensional fault systems by use of plaster HAAKON FOSSEN Statoil, N-5020 Bergen... -scale structures in relation to larger fault...

27

Development of a methodology to discriminate incipient insulator faults from distribution system load  

E-Print Network [OSTI]

of incipient insulator faults 4. Determining characteristics most likely to discriminate incipient insulator faults from distribution system load current From this work, the aggregate of the non-harmonic components and the high frequency energy of the leakage...

Richards, Christopher Scott

2000-01-01T23:59:59.000Z

28

Low-cost motor drive embedded fault diagnosis systems  

E-Print Network [OSTI]

Electric motors are used widely in industrial manufacturing plants. Bearing faults, insulation faults, and rotor faults are the major causes of electric motor failures. Based on the line current analysis, this dissertation mainly deals with the low...

Akin, Bilal

2009-05-15T23:59:59.000Z

29

Fault-tolerant reactor protection system  

DOE Patents [OSTI]

A reactor protection system is disclosed having four divisions, with quad redundant sensors for each scram parameter providing input to four independent microprocessor-based electronic chassis. Each electronic chassis acquires the scram parameter data from its own sensor, digitizes the information, and then transmits the sensor reading to the other three electronic chassis via optical fibers. To increase system availability and reduce false scrams, the reactor protection system employs two levels of voting on a need for reactor scram. The electronic chassis perform software divisional data processing, vote 2/3 with spare based upon information from all four sensors, and send the divisional scram signals to the hardware logic panel, which performs a 2/4 division vote on whether or not to initiate a reactor scram. Each chassis makes a divisional scram decision based on data from all sensors. Each division performs independently of the others (asynchronous operation). All communications between the divisions are asynchronous. Each chassis substitutes its own spare sensor reading in the 2/3 vote if a sensor reading from one of the other chassis is faulty or missing. Therefore the presence of at least two valid sensor readings in excess of a set point is required before terminating the output to the hardware logic of a scram inhibition signal even when one of the four sensors is faulty or when one of the divisions is out of service. 16 figs.

Gaubatz, D.C.

1997-04-15T23:59:59.000Z

30

State of the art analysis of online fault location on AC cables in underground transmission systems  

E-Print Network [OSTI]

on transmission level fault location methods have been focused on overhead lines. Because of the very different- termine the fault location. Because only one end meas- urements are used, the algorithm is derived usingState of the art analysis of online fault location on AC cables in underground transmission systems

Bak, Claus Leth

31

An expert system for fault detection and diagnosis  

E-Print Network [OSTI]

to thank Dr. Ali Abur for his help in setting Eb1TP simulations. I would also lilre to thank Charles Fromen and Don Sevcik both with HLtrP Houston for providing invaluable expertise used in this thesis. TABLE OF CONTENTS CHAPTER Page INTRODUCTION . A... IV EXPERT SYSTEM DESIGN . . A. Introduction B. Rochester DFR Conversion C. EMTP Output File Conversion 46 46 47 54 vn1 CHAPTER Page VI D. Signal Analysis: MATI, AB . E. Fault Diagnosis: CLIPS F. Waveform Presentation: MATLAB G...

Spasojevic, Predrag

1992-01-01T23:59:59.000Z

32

E-Print Network 3.0 - andreas fault system Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

are approximately three times... OF DEVIATORIC STRESS ALONG THE SAN ANDREAS FAULT B. R. Smith (1), D. T. Sandwell (1) (1) IGPP, Scripps... along the San Andreas system ......

33

Coulomb stress accumulation along the San Andreas Fault system Bridget Smith and David Sandwell  

E-Print Network [OSTI]

Coulomb stress accumulation along the San Andreas Fault system Bridget Smith and David Sandwell deformation, SCEC velocities, crustal stress Citation: Smith, B., and D. Sandwell, Coulomb stress accumulation

Smith-Konter, Bridget

34

Seismoelectric Imaging of a Shallow Fault System Employing Fault Guided Waves  

E-Print Network [OSTI]

Independent sets of reflection seismic and seismoelectric data were collected, processed, and interpreted with the aim of generating and studying guided waves within a fault zone. While seismic surveys have recently been utilized to investigate...

Cohrs, Frelynn Joseph Reese

2012-07-16T23:59:59.000Z

35

Methodology for designing the fuzzy resolver for a radial distribution system fault locator  

E-Print Network [OSTI]

The Power System Automation Lab at Texas A&M University developed a fault location scheme that can be used for radial distribution systems. When a fault occurs, the scheme executes three stages. In the first stage, all data measurements and system...

Li, Jun

2006-04-12T23:59:59.000Z

36

Action Models: A Reliability Modeling Formalism for Fault-Tolerant Distributed Computing Systems  

E-Print Network [OSTI]

Action Models: A Reliability Modeling Formalism for Fault-Tolerant Distributed Computing Systems. Introduction Model-based evaluation of the reliability of distributed systems has traditionally required expert- proach to analyze the reliability of fault-tolerant distributed systems. More in particular, we want

Newcastle upon Tyne, University of

37

Award ER25750: Coordinated Infrastructure for Fault Tolerance Systems Indiana University Final Report  

SciTech Connect (OSTI)

The main purpose of the Coordinated Infrastructure for Fault Tolerance in Systems initiative has been to conduct research with a goal of providing end-to-end fault tolerance on a systemwide basis for applications and other system software. While fault tolerance has been an integral part of most high-performance computing (HPC) system software developed over the past decade, it has been treated mostly as a collection of isolated stovepipes. Visibility and response to faults has typically been limited to the particular hardware and software subsystems in which they are initially observed. Little fault information is shared across subsystems, allowing little flexibility or control on a system-wide basis, making it practically impossible to provide cohesive end-to-end fault tolerance in support of scientific applications. As an example, consider faults such as communication link failures that can be seen by a network library but are not directly visible to the job scheduler, or consider faults related to node failures that can be detected by system monitoring software but are not inherently visible to the resource manager. If information about such faults could be shared by the network libraries or monitoring software, then other system software, such as a resource manager or job scheduler, could ensure that failed nodes or failed network links were excluded from further job allocations and that further diagnosis could be performed. As a founding member and one of the lead developers of the Open MPI project, our efforts over the course of this project have been focused on making Open MPI more robust to failures by supporting various fault tolerance techniques, and using fault information exchange and coordination between MPI and the HPC system software stack?from the application, numeric libraries, and programming language runtime to other common system components such as jobs schedulers, resource managers, and monitoring tools.

Lumsdaine, Andrew

2013-03-08T23:59:59.000Z

38

Detecting Intrusion Faults in Remotely Controlled Systems Salvatore Candido and Seth Hutchinson  

E-Print Network [OSTI]

the design process. With this in mind, researchers have begun to address security issues specific to controlDetecting Intrusion Faults in Remotely Controlled Systems Salvatore Candido and Seth Hutchinson to a remote-controlled system (deemed an "intrusion fault" or "intrusion") despite attempts to conceal

Hutchinson, Seth

39

Automated Analysis of Fault-Tolerance in Distributed Systems Scott D. Stoller y  

E-Print Network [OSTI]

Automated Analysis of Fault-Tolerance in Distributed Systems #3; Scott D. Stoller y Computer satisfy in speci#12;ed failure scenarios. Our analysis method is to compute, for each failure scenario for which the user speci#12;ed a fault-tolerance requirement, an MFG representing the system's communication

Schneider, Fred B.

40

Modeling and Measurement Constraints in Fault Diagnostics for HVAC Systems Massieh Najafi1  

E-Print Network [OSTI]

Modeling and Measurement Constraints in Fault Diagnostics for HVAC Systems Massieh Najafi1 , David for determining HVAC diagnostics, methods to detect faults in HVAC systems are still generally undeveloped. Most in a substantial increase in energy use. For example, failure of an HVAC fan may prevent cool air from one

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Detection and diagnosis of faults and energy monitoring of HVAC systems with least-intrusive power analysis  

E-Print Network [OSTI]

Faults indicate degradation or sudden failure of equipment in a system. Widely existing in heating, ventilating, and air conditioning (HVAC) systems, faults always lead to inefficient energy consumption, undesirable indoor ...

Luo, Dong, 1966-

2001-01-01T23:59:59.000Z

42

A Fully Automated Fault-tolerant System for Distributed Video Processing and Off-site Replication  

E-Print Network [OSTI]

A Fully Automated Fault-tolerant System for Distributed Video Processing and Off-site Replication been a failure-prone tedious operation with an operator needed to babysit the processing and off-site, off-site replication, fault-tolerance, grid, educational research. 1. INTRODUCTION In different fields

Wisconsin at Madison, University of

43

A Qualitive Modeling Approach for Fault Detection and Diagnosis on HVAC Systems  

E-Print Network [OSTI]

This paper describes the basics and first test results of a model based approach using qualitative modeling to perform Fault Detection and Diagnostics (FDD) on HVAC and R systems. A quantized system describing the qualitative behavior of a...

Muller, T.; Rehault, N.; Rist, T.

2013-01-01T23:59:59.000Z

44

System and method for motor fault detection using stator current noise cancellation  

DOE Patents [OSTI]

A system and method for detecting incipient mechanical motor faults by way of current noise cancellation is disclosed. The system includes a controller configured to detect indicia of incipient mechanical motor faults. The controller further includes a processor programmed to receive a baseline set of current data from an operating motor and define a noise component in the baseline set of current data. The processor is also programmed to acquire at least on additional set of real-time operating current data from the motor during operation, redefine the noise component present in each additional set of real-time operating current data, and remove the noise component from the operating current data in real-time to isolate any fault components present in the operating current data. The processor is then programmed to generate a fault index for the operating current data based on any isolated fault components.

Zhou, Wei (Los Angeles, CA); Lu, Bin (Kenosha, WI); Nowak, Michael P. (Menomonee Falls, WI); Dimino, Steven A. (Wauwatosa, WI)

2010-12-07T23:59:59.000Z

45

System and method for bearing fault detection using stator current noise cancellation  

DOE Patents [OSTI]

A system and method for detecting incipient mechanical motor faults by way of current noise cancellation is disclosed. The system includes a controller configured to detect indicia of incipient mechanical motor faults. The controller further includes a processor programmed to receive a baseline set of current data from an operating motor and define a noise component in the baseline set of current data. The processor is also programmed to repeatedly receive real-time operating current data from the operating motor and remove the noise component from the operating current data in real-time to isolate any fault components present in the operating current data. The processor is then programmed to generate a fault index for the operating current data based on any isolated fault components.

Zhou, Wei (Los Angeles, CA); Lu, Bin (Kenosha, WI); Habetler, Thomas G. (Snellville, GA); Harley, Ronald G. (Lawrenceville, GA); Theisen, Peter J. (West Bend, WI)

2010-08-17T23:59:59.000Z

46

Fault tree synthesis for software design analysis of PLC based safety-critical systems  

SciTech Connect (OSTI)

As a software verification and validation should be performed for the development of PLC based safety-critical systems, a software safety analysis is also considered in line with entire software life cycle. In this paper, we propose a technique of software safety analysis in the design phase. Among various software hazard analysis techniques, fault tree analysis is most widely used for the safety analysis of nuclear power plant systems. Fault tree analysis also has the most intuitive notation and makes both qualitative and quantitative analyses possible. To analyze the design phase more effectively, we propose a technique of fault tree synthesis, along with a universal fault tree template for the architecture modules of nuclear software. Consequently, we can analyze the safety of software on the basis of fault tree synthesis. (authors)

Koo, S. R.; Cho, C. H. [Corporate R and D Inst., Doosan Heavy Industries and Construction Co., Ltd., 39-3, Seongbok-Dong, Yongin-Si, Gyeonggi-Do 449-795 (Korea, Republic of); Seong, P. H. [Dept. of Nuclear and Quantum Engineering, Korea Advanced Inst. of Science and Technology, 373-3 Guseong-dong, Yuseong-gu, Daejeon, 305-701 (Korea, Republic of)

2006-07-01T23:59:59.000Z

47

System for detecting and limiting electrical ground faults within electrical devices  

DOE Patents [OSTI]

An electrical ground fault detection and limitation system for employment with a nuclear reactor utilizing a liquid metal coolant. Elongate electromagnetic pumps submerged within the liquid metal coolant and electrical support equipment experiencing an insulation breakdown occasion the development of electrical ground fault current. Without some form of detection and control, these currents may build to damaging power levels to expose the pump drive components to liquid metal coolant such as sodium with resultant undesirable secondary effects. Such electrical ground fault currents are detected and controlled through the employment of an isolated power input to the pumps and with the use of a ground fault control conductor providing a direct return path from the affected components to the power source. By incorporating a resistance arrangement with the ground fault control conductor, the amount of fault current permitted to flow may be regulated to the extent that the reactor may remain in operation until maintenance may be performed, notwithstanding the existence of the fault. Monitors such as synchronous demodulators may be employed to identify and evaluate fault currents for each phase of a polyphase power, and control input to the submerged pump and associated support equipment.

Gaubatz, Donald C. (Cupertino, CA)

1990-01-01T23:59:59.000Z

48

Remote Fault Detection of Building HVAC System Using a Global Optimization Program  

E-Print Network [OSTI]

fault detection method using the global optimization program Solver® (Frontline Systems, 2000) coupled to a simplified simulation program, which is a coding of the ASHRAE 'Simplified Energy Analysis Procedure' (Knebel, 1983). This approach uses...

Lee, S. U.; Claridge, D. E.

2004-01-01T23:59:59.000Z

49

An integrated methodology for the performance and reliability evaluation of fault-tolerant systems  

E-Print Network [OSTI]

This thesis proposes a new methodology for the integrated performance and reliability evaluation of embedded fault-tolerant systems used in aircraft, space, tactical, and automotive applications. This methodology uses a ...

Domínguez-García, Alejandro D. (Alejandro Dan)

2007-01-01T23:59:59.000Z

50

The San Andreas Fault System Paul Withers Wallace RE, The San Andreas Fault System, California, USGS Professional Paper 1515,  

E-Print Network [OSTI]

mainland Mexico. The San Andreas fault is commonly referred to as the boundary between the Pacific is correlated with the local geological setting. CO2 lubrication, #12;increased pore pressure, and decreased

Withers, Paul

51

Fault Diagnosis System for a Multilevel Inverter Using a Principal Component Neural Network Surin Khomfoi  

E-Print Network [OSTI]

Fault Diagnosis System for a Multilevel Inverter Using a Principal Component Neural Network Surin system in a multilevel-inverter using a compact neural network is proposed in this paper. It is difficult to diagnose a multilevel-inverter drive (MLID) system using a mathematical model because MLID systems consist

Tolbert, Leon M.

52

Abstract--The reliability and quality of power distribution systems are usually affected by many different distribution faults.  

E-Print Network [OSTI]

1 Abstract--The reliability and quality of power distribution systems are usually affected by many and to provide a more effective fault restoration system. Index Terms-- power distribution systems, statistical analysis, tree-caused distribution faults. I. INTRODUCTION OWER systems play a very important role in our

Chow, Mo-Yuen

53

Fault tolerant control of automatically controlled vehicles in response to brake system failures  

E-Print Network [OSTI]

in the brake system is vital. In this thesis, nonlinear failure detection filters are used for fault detection of sensors and actuators in a class of nonlinear systems. In this thesis, the effects of brake system failures in an AHS where the vehicle steering...

Hsien, Li-Wei

1998-01-01T23:59:59.000Z

54

Observer-based fault detection for nuclear reactors  

E-Print Network [OSTI]

This is a study of fault detection for nuclear reactor systems. Basic concepts are derived from fundamental theories on system observers. Different types of fault- actuator fault, sensor fault, and system dynamics fault ...

Li, Qing, 1972-

2001-01-01T23:59:59.000Z

55

Fault tree construction of hybrid system requirements using qualitative formal method  

E-Print Network [OSTI]

the truth of the proposition (P and C/Sp) where P, C, and Sp refer to the behavioral model of the plant to perform fault tree analysis on requirements for the Wolsong nuclear power plant shutdown system indicates system consists of a discrete program within a continuous plant which is governed by the laws of physics

56

A Brief Status on Condition Monitoring and Fault Diagnosis in Wind Energy Conversion Systems  

E-Print Network [OSTI]

A Brief Status on Condition Monitoring and Fault Diagnosis in Wind Energy Conversion Systems--There is a constant need for the reduction of operational and maintenance costs of Wind Energy Conversion Systems Reviews 3, 9 (2009) 2629-2636" DOI : 10.1016/j.rser.2009.06.031 #12;I. INTRODUCTION Wind energy conversion

Paris-Sud XI, Université de

57

Condition Monitoring and Fault Diagnosis in Wind Energy Conversion Systems: A Review  

E-Print Network [OSTI]

Condition Monitoring and Fault Diagnosis in Wind Energy Conversion Systems: A Review Y. Amirat, M for the reduction of operational and maintenance costs of Wind Energy Conversion Systems (WECS). The most efficient. INTRODUCTION Wind energy conversion is the fastest-growing source of new electric generation in the world

Paris-Sud XI, Université de

58

Complete genome sequence of the halophilic bacterium Spirochaeta africana type strain (Z-7692T) from the alkaline Lake Magadi in the East African Rift  

SciTech Connect (OSTI)

Spirochaeta africana Zhilina et al. 1996 is an anaerobic, aerotolerant, spiral-shaped bacte- rium that is motile via periplasmic flagella. The type strain of the species, Z-7692T, was iso- lated in 1993 or earlier from a bacterial bloom in the brine under the trona layer in a shallow lagoon of the alkaline equatorial Lake Magadi in Kenya. Here we describe the features of this organism, together with the complete genome sequence, and annotation. Considering the pending reclassification of S. caldaria to the genus Treponema, S. africana is only the second 'true' member of the genus Spirochaeta with a genome-sequenced type strain to be pub- lished. The 3,285,855 bp long genome of strain Z-7692T with its 2,817 protein-coding and 57 RNA genes is a part of the Genomic Encyclopedia of Bacteria and Archaea project.

Liolios, Konstantinos [U.S. Department of Energy, Joint Genome Institute; Abt, Birte [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Scheuner, Carmen [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Teshima, Hazuki [Los Alamos National Laboratory (LANL); Held, Brittany [Los Alamos National Laboratory (LANL); Lapidus, Alla L. [U.S. Department of Energy, Joint Genome Institute; Nolan, Matt [U.S. Department of Energy, Joint Genome Institute; Lucas, Susan [U.S. Department of Energy, Joint Genome Institute; Deshpande, Shweta [U.S. Department of Energy, Joint Genome Institute; Cheng, Jan-Fang [U.S. Department of Energy, Joint Genome Institute; Tapia, Roxanne [Los Alamos National Laboratory (LANL); Goodwin, Lynne A. [Los Alamos National Laboratory (LANL); Pitluck, Sam [U.S. Department of Energy, Joint Genome Institute; Pagani, Ioanna [U.S. Department of Energy, Joint Genome Institute; Ivanova, N [U.S. Department of Energy, Joint Genome Institute; Mavromatis, K [U.S. Department of Energy, Joint Genome Institute; Mikhailova, Natalia [U.S. Department of Energy, Joint Genome Institute; Huntemann, Marcel [U.S. Department of Energy, Joint Genome Institute; Pati, Amrita [U.S. Department of Energy, Joint Genome Institute; Chen, Amy [U.S. Department of Energy, Joint Genome Institute; Palaniappan, Krishna [U.S. Department of Energy, Joint Genome Institute; Land, Miriam L [ORNL; Rohde, Manfred [HZI - Helmholtz Centre for Infection Research, Braunschweig, Germany; Tindall, Brian [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Detter, J. Chris [U.S. Department of Energy, Joint Genome Institute; Goker, Markus [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Bristow, James [U.S. Department of Energy, Joint Genome Institute; Eisen, Jonathan [U.S. Department of Energy, Joint Genome Institute; Markowitz, Victor [U.S. Department of Energy, Joint Genome Institute; Hugenholtz, Philip [U.S. Department of Energy, Joint Genome Institute; Woyke, Tanja [U.S. Department of Energy, Joint Genome Institute; Klenk, Hans-Peter [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Kyrpides, Nikos C [U.S. Department of Energy, Joint Genome Institute

2013-01-01T23:59:59.000Z

59

Final Project Report: Self-Correcting Controls for VAV System Faults Filter/Fan/Coil and VAV Box Sections  

SciTech Connect (OSTI)

This report addresses original research by the Pacific Northwest National Laboratory for the California Institute for Energy and Environment on self-correcting controls for variable-air-volume (VAV) heating, ventilating and air-conditioning systems and focuses specifically on air handling and VAV box components of the air side of the system. A complete set of faults for these components was compiled and a fault mode analysis performed to understand the detectable symptoms of the faults and the chain of causation. A set of 26 algorithms was developed to facilitate the automatic correction of these faults in typical commercial VAV systems. These algorithms include training tests that are used during commissioning to develop models of normal system operation, passive diagnostics used to detect the symptoms of faults, proactive diagnostics used to diagnose the cause of a fault, and finally fault correction algorithms. Ten of the twenty six algorithms were implemented in a prototype software package that interfaces with a test bed facility at PNNL's Richland, WA, laboratory. Measurement bias faults were instigated in the supply-air temperature sensor and the supply-air flow meter to test the algorithms developed. The algorithms as implemented in the laboratory software correctly detected, diagnosed and corrected these faults. Finally, an economic and impact assessment was performed for the State of California for deployment of self-correcting controls. Assuming 15% HVAC energy savings and a modeled deployment profile, 3.1-5.8 TBu of energy savings are possible by year 15.

Brambley, Michael R.; Fernandez, Nicholas; Wang, Weimin; Cort, Katherine A.; Cho, Heejin; Ngo, Hung; Goddard, James K.

2011-05-01T23:59:59.000Z

60

Significant Earthquakes on the Enriquillo Fault System, Hispaniola, 15002010: Implications for Seismic Hazard  

E-Print Network [OSTI]

Significant Earthquakes on the Enriquillo Fault System, Hispaniola, 1500­2010: Implications, particularly on the island of Hispaniola. We use accounts of historical earthquakes to assign intensities for Hispaniola. The intensity assignments and the attenuation relation are used in a grid search to find source

ten Brink, Uri S.

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Evaluating the Effectiveness of Fault Tolerance in Replicated Database Management Systems  

E-Print Network [OSTI]

-Olaf.Hvasshovd@idi.ntnu.no Abstract Database management systems (DBMS) achieve high availabilityand faulttolerance usuallyby of this study is two-fold. It eval- uates the effectiveness of DBMS fault tolerance in the pres- ence on database integrity, performance, and availability on a replicated DBMS, ClustRa[6], in the presence

62

Study of the non-linear dynamic response of a rotor system with faults and uncertainties  

E-Print Network [OSTI]

of the non-linear re- sponse in rotor systems with multi-faults (such as unbalance, asymmetric shaft, bow and Ferraris in fixed frame [10]. · The bow is an initial deformation of the rotor which can be caused) or all parts of the rotor (extended bow). Darpe [12] proposes to investigate the influence of a bow

Paris-Sud XI, Université de

63

Rupture Dynamics of Strike-Slip Faults with Stepovers: From Conceptually Simplified to Realistically Complex Fault Systems  

E-Print Network [OSTI]

This dissertation investigates the interaction of model II in-plane dynamic rupture with a geometrical discontinuity along the fault strike: stepover. One goal is to understand how large the stepover width must be to stop the dynamic rupture...

Liu, Zaifeng

2014-05-05T23:59:59.000Z

64

A H-infinity Fault Detection and Diagnosis Scheme for Discrete Nonlinear System Using Output Probability Density Estimation  

SciTech Connect (OSTI)

In this paper, a H-infinity fault detection and diagnosis (FDD) scheme for a class of discrete nonlinear system fault using output probability density estimation is presented. Unlike classical FDD problems, the measured output of the system is viewed as a stochastic process and its square root probability density function (PDF) is modeled with B-spline functions, which leads to a deterministic space-time dynamic model including nonlinearities, uncertainties. A weighting mean value is given as an integral function of the square root PDF along space direction, which leads a function only about time and can be used to construct residual signal. Thus, the classical nonlinear filter approach can be used to detect and diagnose the fault in system. A feasible detection criterion is obtained at first, and a new H-infinity adaptive fault diagnosis algorithm is further investigated to estimate the fault. Simulation example is given to demonstrate the effectiveness of the proposed approaches.

Zhang Yumin; Lum, Kai-Yew [Temasek Laboratories, National University of Singapore, Singapore 117508 (Singapore); Wang Qingguo [Depa. Electrical and Computer Engineering, National University of Singapore, Singapore 117576 (Singapore)

2009-03-05T23:59:59.000Z

65

Distribution of the right-lateral strikeslip motion from the Main Recent Fault to the Kazerun Fault System (Zagros, Iran): Evidence from present-day GPS velocities  

E-Print Network [OSTI]

Fault System (Zagros, Iran): Evidence from present-day GPS velocities F. Tavakoli a,b , A. Walpersdorf a Center, Meraj Ave. Azadi Sq., P.O.Box 13185-1684, Tehran, Iran c CEREGE, CNRS, Université Aix-Marseille-3 Institute for Earthquake Engineering and Seismology, P.O. Box 19395/3913, Tehran, Iran e Institut de

Hatzfeld, Denis

66

Study of a Fault Analysis System for a Heat Supply Network Based on GIS  

E-Print Network [OSTI]

and rationality effectively. More recently, several cities developed GIS, but most of them only paid attention to facility management and view display. The techniques of the analysis and decision-making of hydraulic calculation, fault analysis and dispatch... in emergency regime, dispatch in emergency regime. What?s more, the system can supply the gist to operator by calculating and analyzing in emergency regime. 2 SYSTEM DESIGN Today there are lots of popular GIS software platforms in domestic & overseas...

Zou, P.; Liu, M.; Tang, H.; Wang, X.; Li, N.; Wang, W.

2006-01-01T23:59:59.000Z

67

Fault Detection and Diagnosis in Building HVAC Systems.  

E-Print Network [OSTI]

??Building HVAC systems account for more than 30% of annual energy consumption in United States. However, it has become apparent that only in a small… (more)

Najafi, Massieh

2010-01-01T23:59:59.000Z

68

Fault Detection and Diagnosis in Building HVAC Systems  

E-Print Network [OSTI]

Wright, “Condition monitoring in HVAC subsystems using firstmonitoring packaged HVAC equipment. ASHRAE Transactions”,Detection and Diagnosis of HVAC Systems Using Support Vector

Najafi, Massieh

2010-01-01T23:59:59.000Z

69

Automatic Channel Fault Detection and Diagnosis System for a Small Animal APD-Based Digital PET Scanner  

E-Print Network [OSTI]

Fault detection and diagnosis is critical to many applications in order to ensure proper operation and performance over time. Positron emission tomography (PET) systems that require regular calibrations by qualified scanner operators are good candidates for such continuous improvements. Furthermore, for scanners employing one-to-one coupling of crystals to photodetectors to achieve enhanced spatial resolution and contrast, the calibration task is even more daunting because of the large number of independent channels involved. To cope with the additional complexity of the calibration and quality control procedures of these scanners, an intelligent system (IS) was designed to perform fault detection and diagnosis (FDD) of malfunctioning channels. The IS can be broken down into four hierarchical modules: parameter extraction, channel fault detection, fault prioritization and diagnosis. Of these modules, the first two have previously been reported and this paper focuses on fault prioritization and diagnosis. The purpose of the fault prioritization module is to help the operator to zero in on the faults that need immediate attention. The fault diagnosis module will then identify the causes of the malfunction and propose an explanation of the reasons that lead to the diagnosis. The FDD system was implemented on a LabPET avalanche photodiode (APD)-based digital PET scanner. Experiments demonstrated a FDD Sensitivity of 99.3 % (with a 95% confidence interval (CI) of: [98.7, 99.9]) for major faults. Globally, the Balanced Accuracy of the diagnosis for varying fault severities is 92 %. This suggests the IS can greatly benefit the operators in their maintenance task.

Jonathan Charest; Jean-François Beaudoin; Jules Cadorette; Roger Lecomte; Charles-Antoine Brunet; Réjean Fontaine

2014-06-16T23:59:59.000Z

70

Microprocessor-based fault-tolerant reactor control and information system  

SciTech Connect (OSTI)

The Reactor Manual Control system (RMCS) and the Rod Position Information system (RPIS), applied to the boiling water reactor (BWR) power plants, areas among the most important systems in controlling the output of nuclear reactor power. Improvement in reliability of the RMCS and RPIS is thus highly important for availability during plant operation. This paper presents a highly reliable RMCS and RPIS employing microprocessors. The developed equipment has been made fault-tolerant by adopting redundancy of each system. The amount of cabling normally required has been reduced by multiplexing transmission via fiber-optic cable. The size of the control panel has been reduced and maintainability improved.

Kakehi, A.; Okutani, T.; Sakamoto, H. (Toshiba Corp., Fuji City (Japan))

1990-03-01T23:59:59.000Z

71

The characteristics of arcing faults in 480-volt power distribution systems  

E-Print Network [OSTI]

December 1994 Major Subject: Electrical Engineering THE CHARACTERISTICS OF ARCING FAULTS IN 480-VOLT POWER DISTRIBUTION SYSTEMS A Thesis by YU SHI Submitted to Texas ARM University in partial fulfillment of the requirements for the degree... of MASTER OF SCIENCE Approved as to style and content by: B. Don Russell (Chair of Committee) . M. Hua g (Member) , 24 . Yurt (Member) M. Kezunovic (Member) A. D. Patton (Head of Department) December 1994 Major Subject; Electrical Engineering...

Shih, Yu?

1994-01-01T23:59:59.000Z

72

A hybrid system for fault detection and sensor fusion based on fuzzy clustering and artificial immune systems  

E-Print Network [OSTI]

A HYBRID SYSTEM FOR FAULT DETECTION AND SENSOR FUSION BASED ON FUZZY CLUSTERING AND ARTIFICIAL IMMUNE SYSTEMS A Dissertation by MOHAMMAD ABDEL KAREEM RASHEED JARADAT Submitted to the Office of Graduate Studies of Texas A... CLUSTERING AND ARTIFICIAL IMMUNE SYSTEMS A Dissertation by MOHAMMAD ABDEL KAREEM RASHEED JARADAT Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR...

Jaradat, Mohammad Abdel Kareem Rasheed

2007-04-25T23:59:59.000Z

73

Efficient Detection on Stochastic Faults in PLC Based Automated Assembly Systems With Novel Sensor Deployment and Diagnoser Design  

E-Print Network [OSTI]

In this dissertation, we proposed solutions on novel sensor deployment and diagnoser design to efficiently detect stochastic faults in PLC based automated systems First, a fuzzy quantitative graph based sensor deployment was called upon to model...

Wu, Zhenhua

2012-07-16T23:59:59.000Z

74

Analysis of transmission system faults in the phase domain  

E-Print Network [OSTI]

. With the advanced development of computers, there is a possibility to totally get rid of the sequence method. In this thesis, a short circuit analysis method based on phase domain is developed. After the three sequence admittance matrices of the system are built...

Zhu, Jun

2004-11-15T23:59:59.000Z

75

Reflection seismic profiling in Wabash Valley fault system in southwestern Indiana  

SciTech Connect (OSTI)

During the summer of 1988 common-depth-point (CDP) reflection seismic profiling was initiated by ARPEX in southwestern Indiana in the Wabash Valley fault system. A 2.2-im (1.4-mi) east-west profile was shot across the Mt. Vernon graben in Posey County. Minihole shooting in 21-m (68.9-ft) patterns using 3.4 kg (7.5 lb) of seismic explosives distributed in five 3-m (10-ft) holes provided the energy source. Most shotholes were made with a reversible air-driven penetrating tool that was effective in dense clays. The 12-geophone array length was 43 m (141 ft), and the nominal far-trace offset was 2.1 km (7,000 ft). A 48-channel recording yielded 24-CDP coverage at 11-m (36-ft) intervals. Data were enhanced by gapped deconvolution, bandpass filtering, and CDP stack. The strongest and most continuous reflections at 0.75 and 1.6 sec are associated with the New Albany Shale (Devonian-Mississippian) and Eau Claire Formation (Cambrian), respectively. Within the Mt. Vernon graben and east of the Spenser Consolidated oil field, the depth to Eau Claire Formation apparently increases by approximately 60 m (197 ft) over a horizontal distance of 1.4 km (0.9 mi). Minor faulting east of the Spencer Consolidated field appears to be synthetic to the Hovey lake fault, which bounds the eastern side of the Mt. Vernon graben. Tentative interpretations of faulting and weak reflections from depths greater than 4.5 km (15,000 ft) may be clarified by additional data processing and by additional seismic profiling planned by ARPEX.

Rene, R.M.; Hester, N.C.; Stanonis, F.L. (Indiana Univ., Bloomington (USA))

1989-08-01T23:59:59.000Z

76

Application of black-box models to HVAC systems for fault detection  

SciTech Connect (OSTI)

This paper describes the application of black-box models for fault detection and diagnosis (FDD) in heating, ventilating, and air-conditioning (HVAC) systems. In this study, multiple-input/single-output (MISO) ARX models and artificial neural network (ANN) models are used. The ARX models are examined for different processes and subprocesses and compared with each other. Two types of models are established--system models and component models. In the case of system models, the HVAC system as a whole is regarded as a black box instead of as a collection of component models. With the component model type, the components of the HVAC system are regarded as separate black boxes.

Peitsman, H.C. [TNO Building and Construction Research, Delft (Netherlands). Dept. of Indoor Environment, Building Physics and Systems; Bakker, V.E. [Univ. of Twente, Enschede (Netherlands). Dept. of Computer Science

1996-11-01T23:59:59.000Z

77

Fault Tolerant Reliable Delivery of Events in Distributed Middleware Systems Shrideep Pallickara, Geoffrey Fox and Hasan Bulut  

E-Print Network [OSTI]

Fault Tolerant Reliable Delivery of Events in Distributed Middleware Systems Shrideep Pallickara interchangeably) is an important problem that needs to be addressed in distributed systems. Increasingly, interactions between entities within a distributed system are encapsulated in events. In this paper we present

78

Fault-Tolerant Reliable Delivery of Messages in Distributed Publish/Subscribe Systems Shrideep Pallickara, Hasan Bulut and Geoffrey Fox  

E-Print Network [OSTI]

1/10 Fault-Tolerant Reliable Delivery of Messages in Distributed Publish/Subscribe Systems Shrideep in distributed systems. In this paper we present our strategy to enable reliable delivery of messages. Messaging is a critical component in distributed systems. Here, the messaging infrastructure can be based

79

Combined expert system/neural networks method for process fault diagnosis  

DOE Patents [OSTI]

A two-level hierarchical approach for process fault diagnosis of an operating system employs a function-oriented approach at a first level and a component characteristic-oriented approach at a second level, where the decision-making procedure is structured in order of decreasing intelligence with increasing precision. At the first level, the diagnostic method is general and has knowledge of the overall process including a wide variety of plant transients and the functional behavior of the process components. An expert system classifies malfunctions by function to narrow the diagnostic focus to a particular set of possible faulty components that could be responsible for the detected functional misbehavior of the operating system. At the second level, the diagnostic method limits its scope to component malfunctions, using more detailed knowledge of component characteristics. Trained artificial neural networks are used to further narrow the diagnosis and to uniquely identify the faulty component by classifying the abnormal condition data as a failure of one of the hypothesized components through component characteristics. Once an anomaly is detected, the hierarchical structure is used to successively narrow the diagnostic focus from a function misbehavior, i.e., a function oriented approach, until the fault can be determined, i.e., a component characteristic-oriented approach. 9 figs.

Reifman, J.; Wei, T.Y.C.

1995-08-15T23:59:59.000Z

80

Combined expert system/neural networks method for process fault diagnosis  

DOE Patents [OSTI]

A two-level hierarchical approach for process fault diagnosis is an operating system employs a function-oriented approach at a first level and a component characteristic-oriented approach at a second level, where the decision-making procedure is structured in order of decreasing intelligence with increasing precision. At the first level, the diagnostic method is general and has knowledge of the overall process including a wide variety of plant transients and the functional behavior of the process components. An expert system classifies malfunctions by function to narrow the diagnostic focus to a particular set of possible faulty components that could be responsible for the detected functional misbehavior of the operating system. At the second level, the diagnostic method limits its scope to component malfunctions, using more detailed knowledge of component characteristics. Trained artificial neural networks are used to further narrow the diagnosis and to uniquely identify the faulty component by classifying the abnormal condition data as a failure of one of the hypothesized components through component characteristics. Once an anomaly is detected, the hierarchical structure is used to successively narrow the diagnostic focus from a function misbehavior, i.e., a function oriented approach, until the fault can be determined, i.e., a component characteristic-oriented approach.

Reifman, Jaques (Westchester, IL); Wei, Thomas Y. C. (Downers Grove, IL)

1995-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Insights From Laboratory Experiments On Simulated Faults With Application To Fracture Evolution In Geothermal Systems  

SciTech Connect (OSTI)

Laboratory experiments provide a wealth of information related to mechanics of fracture initiation, fracture propagation processes, factors influencing fault strength, and spatio-temporal evolution of fracture properties. Much of the existing literature reports on laboratory studies involving a coupling of thermal, hydraulic, mechanical, and/or chemical processes. As these processes operate within subsurface environments exploited for their energy resource, laboratory results provide insights into factors influencing the mechanical and hydraulic properties of geothermal systems. I report on laboratory observations of strength and fluid transport properties during deformation of simulated faults. The results show systematic trends that vary with stress state, deformation rate, thermal conditions, fluid content, and rock composition. When related to geophysical and geologic measurements obtained from engineered geothermal systems (e.g. microseismicity, wellbore studies, tracer analysis), laboratory results provide a means by which the evolving thermal reservoir can be interpreted in terms of physico-chemical processes. For example, estimates of energy release and microearthquake locations from seismic moment tensor analysis can be related to strength variations observed from friction experiments. Such correlations between laboratory and field data allow for better interpretations about the evolving mechanical and fluid transport properties in the geothermal reservoir – ultimately leading to improvements in managing the resource.

Stephen L. Karner, Ph.D

2006-06-01T23:59:59.000Z

82

Reverse Computation for Rollback-based Fault Tolerance in Large Parallel Systems  

SciTech Connect (OSTI)

Reverse computation is presented here as an important future direction in addressing the challenge of fault tolerant execution on very large cluster platforms for parallel computing. As the scale of parallel jobs increases, traditional checkpointing approaches suffer scalability problems ranging from computational slowdowns to high congestion at the persistent stores for checkpoints. Reverse computation can overcome such problems and is also better suited for parallel computing on newer architectures with smaller, cheaper or energy-efficient memories and file systems. Initial evidence for the feasibility of reverse computation in large systems is presented with detailed performance data from a particle simulation scaling to 65,536 processor cores and 950 accelerators (GPUs). Reverse computation is observed to deliver very large gains relative to checkpointing schemes when nodes rely on their host processors/memory to tolerate faults at their accelerators. A comparison between reverse computation and checkpointing with measurements such as cache miss ratios, TLB misses and memory usage indicates that reverse computation is hard to ignore as a future alternative to be pursued in emerging architectures.

Perumalla, Kalyan S [ORNL; Park, Alfred J [ORNL

2013-01-01T23:59:59.000Z

83

Bulletin of the Seismological Society of America Significant Earthquakes on the Enriquillo Fault System, Hispaniola, 1500-2010  

E-Print Network [OSTI]

System, Hispaniola, 1500-2010: Implications for Seismic Hazard --Manuscript Draft-- Manuscript Number Earthquakes on the Enriquillo Fault System, Hispaniola, 1500-2010: Implications for Seismic Hazard the past 500 years, particularly on the island of Hispaniola. We use accounts of historical earthquakes

ten Brink, Uri S.

84

Security and Fault-tolerance in Distributed Systems ETHZ, Spring 2012 Christian Cachin, IBM Research -Zurich www.zurich.ibm.com/~cca/  

E-Print Network [OSTI]

, reduced airflow = error, no cooling = failure. · Power supply system: no cooling = fault, overheating, fan in power supply congested by dust, airflow massively reduced, fan not effective, power supply = error, loss of power = failure. · Computer system: broken power supply = fault, no power on mainboard

Cachin, Christian

85

Security and Fault-tolerance in Distributed Systems ETHZ, Spring 2013 Christian Cachin, IBM Research -Zurich www.zurich.ibm.com/~cca/  

E-Print Network [OSTI]

, reduced airflow = error, no cooling = failure. · Power supply system: no cooling = fault, overheating, fan in power supply congested by dust, airflow massively reduced, fan not effective, power supply = error, loss of power = failure. · Computer system: broken power supply = fault, no power on mainboard

Cachin, Christian

86

Hydrogeological aspects of fault zones on various scales in the Roer Valley Rift System  

E-Print Network [OSTI]

for an estimate of the micro-scale variation of the hydraulic properties within a fault zone. Additional core on several scales show a variety of hydro- geological aspects of faults. 2. Examples 2.1. The hydraulic can be studied on micro-scal

Bense, Victor

87

A system-of-systems framework of Nuclear Power Plant Probabilistic Seismic Hazard Analysis by Fault Tree analysis and Monte Carlo simulation  

E-Print Network [OSTI]

A system-of-systems framework of Nuclear Power Plant Probabilistic Seismic Hazard Analysis by Fault and the Energetic Challenge, European Foundation for New Energy - Electricité de France, at �cole Centrale Paris - Supelec, France enrico.zio@ecp.fr, enrico.zio@supelec.fr b Department of Energy, Politecnico di Milano

Boyer, Edmond

88

On-line implementation of a fault diagnosis system for three-phase induction motors  

E-Print Network [OSTI]

Condition monitoring of electric machinery has received increased attention due to the advantages it offers in terms of productivity. Automation of the fault detection and diagnosis processes would not only allow for extensive monitoring but also...

Alladi, Vijaya Mallikarjun

2002-01-01T23:59:59.000Z

89

Integrating Reliability into the Design of Fault-Tolerant Power Electronics Systems  

E-Print Network [OSTI]

, tactical, and automotive applications, mandates that the design functions be performed even in the presence reliability block diagrams [3], failure modes and effects analysis (FMEA) [4], fault trees [5], and Markov

Liberzon, Daniel

90

System Support for Software Fault Tolerance in Highly Available Database Management Systems  

E-Print Network [OSTI]

of several techniques for early error detection and fast recovery in a database management system (DBMS system and the IMS DBMS and DB2 DBMS. The study classifies errors by the type of coding mistake system allow the DBMS to guard (write-protect) #12;2 some of its internal data structures. Guarding DBMS

California at Irvine, University of

91

FMICS 2004 Preliminary Version Modeling fault-tolerant distributed systems for  

E-Print Network [OSTI]

applications (space, aeronautics, nuclear. . .) as well as public domain applications (automotive, consumer.elsevier.nl/locate/entcs #12;A. Girault and E. Rutten or portable devices), radiation resistance (nuclear or space), or price. The properties enforced concern consistent execution, functionality fulfillment (whatever the faults, under some

Girault, Alain

92

Field testing of component-level model-based fault detection methods for mixing boxes and VAV fan systems  

SciTech Connect (OSTI)

An automated fault detection and diagnosis tool for HVAC systems is being developed, based on an integrated, life-cycle, approach to commissioning and performance monitoring. The tool uses component-level HVAC equipment models implemented in the SPARK equation-based simulation environment. The models are configured using design information and component manufacturers' data and then fine-tuned to match the actual performance of the equipment by using data measured during functional tests of the sort using in commissioning. This paper presents the results of field tests of mixing box and VAV fan system models in an experimental facility and a commercial office building. The models were found to be capable of representing the performance of correctly operating mixing box and VAV fan systems and detecting several types of incorrect operation.

Xu, Peng; Haves, Philip

2002-05-16T23:59:59.000Z

93

An adaptive algorithm for the detection of high impedance faults on power distribution systems  

E-Print Network [OSTI]

heterogeneous level 2 events. The class of such an event probably could not be clearly determined, but due to the persistence of most faults, the next event would be homogeneous. TRL2 1. Initialize: p;, C(p;), n? i = 1, . . . , Nr are given, qp = p = 0... OF LITERATURE III TRAINING ALGORITHMS 12 A. Overview . B. Level 1 Training Algorithm (TRL1) C. Level 2 Training Algorithm (TRL2) IV ONLINE ALGORITHM 12 13 18 21 A. Extensions to TRL2 B. ONLINE algorithm V IMPLEMENTATION AND RESULTS 21 24 27 VI A...

McCall, Kurt Eric

1990-01-01T23:59:59.000Z

94

Low Cost Arc Fault Detection and Protection for PV Systems: January 30, 2012 - September 30, 2013  

SciTech Connect (OSTI)

Final report for Tigo Energy Incubator project. The specific objective of this 18-month research effort was to develop an off-the-shelf arc-fault detector. The starting point of the project was a prototype detector that was constructed using discrete components and laboratory equipment. An intermediate objective was to build a technically viable detector using programmable components in the detector circuitry. The final objective was to build a commercially viable detector by reducing the cost of the circuitry through the use of more sophisticated programmable components and higher levels of integration.

McCalmont, S.

2013-10-01T23:59:59.000Z

95

Evaluation of Simple Causal Message Logging for Large-Scale Fault Tolerant HPC Systems  

SciTech Connect (OSTI)

The era of petascale computing brought machines with hundreds of thousands of processors. The next generation of exascale supercomputers will make available clusters with millions of processors. In those machines, mean time between failures will range from a few minutes to few tens of minutes, making the crash of a processor the common case, instead of a rarity. Parallel applications running on those large machines will need to simultaneously survive crashes and maintain high productivity. To achieve that, fault tolerance techniques will have to go beyond checkpoint/restart, which requires all processors to roll back in case of a failure. Incorporating some form of message logging will provide a framework where only a subset of processors are rolled back after a crash. In this paper, we discuss why a simple causal message logging protocol seems a promising alternative to provide fault tolerance in large supercomputers. As opposed to pessimistic message logging, it has low latency overhead, especially in collective communication operations. Besides, it saves messages when more than one thread is running per processor. Finally, we demonstrate that a simple causal message logging protocol has a faster recovery and a low performance penalty when compared to checkpoint/restart. Running NAS Parallel Benchmarks (CG, MG and BT) on 1024 processors, simple causal message logging has a latency overhead below 5%.

Bronevetsky, G; Meneses, E; Kale, L V

2011-02-25T23:59:59.000Z

96

Neural net application to transmission line fault detection and classification  

E-Print Network [OSTI]

, is to perform fault analysis by expert operators using their knowledge about the power systems and experience with past faults. Because of the time required to deal with complex fault situations, detailed fault analysis can not be performed by human operators...

Rikalo, Igor

1994-01-01T23:59:59.000Z

97

Synchronized sampling improves fault location  

SciTech Connect (OSTI)

Transmission line faults must be located accurately to allow maintenance crews to arrive at the scene and repair the faulted section as soon as possible. Rugged terrain and geographical layout cause some sections of power transmission lines to be difficult to reach. In the past, a variety of fault location algorithms were introduced as either an add-on feature in protective relays or stand-alone implementation in fault locators. In both cases, the measurements of current and voltages were taken at one terminal of a transmission line only. Under such conditions, it may become difficult to determine the fault location accurately, since data from other transmission line ends are required for more precise computations. In the absence of data from the other end, existing algorithms have accuracy problems under several circumstances, such as varying switching and loading conditions, fault infeed from the other end, and random value of fault resistance. Most of the one-end algorithms were based on estimation of voltage and current phasors. The need to estimate phasors introduces additional difficulty in high-speed tripping situations where the algorithms may not be fast enough in determining fault location accurately before the current signals disappear due to the relay operation and breaker opening. This article introduces a unique concept of high-speed fault location that can be implemented either as a simple add-on to the digital fault recorders (DFRs) or as a stand-alone new relaying function. This advanced concept is based on the use of voltage and current samples that are synchronously taken at both ends of a transmission line. This sampling technique can be made readily available in some new DFR designs incorporating receivers for accurate sampling clock synchronization using the satellite Global Positioning System (GPS).

Kezunovic, M. [Texas A and M Univ., College Station, TX (United States)] [Texas A and M Univ., College Station, TX (United States); Perunicic, B. [Lamar Univ., Beaumont, TX (United States)] [Lamar Univ., Beaumont, TX (United States)

1995-04-01T23:59:59.000Z

98

Towards Fault-Tolerant Digital Microfluidic Lab-on-Chip: Defects, Fault Modeling, Testing, and Reconfiguration  

E-Print Network [OSTI]

Towards Fault-Tolerant Digital Microfluidic Lab-on-Chip: Defects, Fault Modeling, Testing, NC 27708, USA Abstract Dependability is an important attribute for microfluidic lab-on-chip devices microfluidic lab-on-chip systems. Defects are related to logical fault models that can be viewed not only

Chakrabarty, Krishnendu

99

Contribution of Identified Active Faults to Near Fault Seismic Hazard in the Flinders Ranges  

E-Print Network [OSTI]

Somerville1 , Peggy Quijada1 , Hong Kie Thio1 , Mike Sandiford2 and Mark Quigley2 1. URS Corporation estimates of fault slip rate from Quigley et al. (2006) to quantify the seismic activity rate on the faults of these models was used in conjunction with the active fault model. Quigley et al. (2006) identified a system

Sandiford, Mike

100

Fault Diagnosis System for a Multilevel Inverter Using a Neural Network Surin Khomfoi Leon M. Tolbert  

E-Print Network [OSTI]

such as photovoltaic, wind, and fuel cells can be easily interfaced to the multilevel inverter system for a high power multilevel inverter systems are utilized in high power applications, the reliability of the power electronics introduced remedial control strategies soon after failure occurrences; therefore, system reliability

Tolbert, Leon M.

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

A Methodology and Tool Support for the Design and Evaluation of Fault Tolerant, Distributed Embedded Systems  

E-Print Network [OSTI]

Architectures for Automotive Electronics Introduced by thearchitectures in automotive electronics. As a consequence toThe use of electronics in automotive control systems will

McKelvin, Jr., Mark Lee

2011-01-01T23:59:59.000Z

102

Dynamic behaviour of a DFIG wind turbine subjected to power system faults  

E-Print Network [OSTI]

of the dynamic interaction between variable speed DFIG wind turbines and the power system subjected by the Danish Transmission System Operator Energinet.dk. Keywords: doubly-fed induction generator (DFIG), wind turbines, the variable speed DFIG wind turbine with its dynamic behaviour and its ride-through capabil- ity

103

Fault-tolerant battery system employing intra-battery network architecture  

DOE Patents [OSTI]

A distributed energy storing system employing a communications network is disclosed. A distributed battery system includes a number of energy storing modules, each of which includes a processor and communications interface. In a network mode of operation, a battery computer communicates with each of the module processors over an intra-battery network and cooperates with individual module processors to coordinate module monitoring and control operations. The battery computer monitors a number of battery and module conditions, including the potential and current state of the battery and individual modules, and the conditions of the battery's thermal management system. An over-discharge protection system, equalization adjustment system, and communications system are also controlled by the battery computer. The battery computer logs and reports various status data on battery level conditions which may be reported to a separate system platform computer. A module transitions to a stand-alone mode of operation if the module detects an absence of communication connectivity with the battery computer. A module which operates in a stand-alone mode performs various monitoring and control functions locally within the module to ensure safe and continued operation.

Hagen, Ronald A. (Stillwater, MN); Chen, Kenneth W. (Fair Oaks, CA); Comte, Christophe (Montreal, CA); Knudson, Orlin B. (Vadnais Heights, MN); Rouillard, Jean (Saint-Luc, CA)

2000-01-01T23:59:59.000Z

104

PRODIAG: Combined expert system/neural network for process fault diagnosis. Volume 1, Theory  

SciTech Connect (OSTI)

The function of the PRODIAG code is to diagnose on-line the root cause of a thermal-hydraulic (T-H) system transient with trace back to the identification of the malfunctioning component using the T-H instrumentation signals exclusively. The code methodology is based on the Al techniques of automated reasoning/expert systems (ES) and artificial neural networks (ANN). The research and development objective is to develop a generic code methodology which would be plant- and T-H-system-independent. For the ES part the only plant or T-H system specific code requirements would be implemented through input only and at that only through a Piping and Instrumentation Diagram (PID) database. For the ANN part the only plant or T-H system specific code requirements would be through the ANN training data for normal component characteristics and the same PID database information. PRODIAG would, therefore, be generic and portable from T-H system to T-H system and from plant to plant without requiring any code-related modifications except for the PID database and the ANN training with the normal component characteristics. This would give PRODIAG the generic feature which numerical simulation plant codes such as TRAC or RELAP5 have. As the code is applied to different plants and different T-H systems, only the connectivity information, the operating conditions and the normal component characteristics are changed, and the changes are made entirely through input. Verification and validation of PRODIAG would, be T-H system independent and would be performed only ``once``.

Reifman, J.; Wei, T.Y.C.; Vitela, J.E.

1995-09-01T23:59:59.000Z

105

Fault tolerant control allocation in systems with fixed magnitude discrete controls  

E-Print Network [OSTI]

in the set R1(?) enters the smaller set R2(?) in finite time, given by the formula T? = ?1 ?? ?1(M?)??2 ??1(??) ?3 ??1(??) (3.49) 29 The unforced system ?x = f(x,0) (3.50) is called forward complete if for every initial statex(0) the solution?(x(0...),.) is defined for all t? 0. Theorem 1. Assume that the system in Equation 3.50 is forward complete and we have ??12 ??1 ???1(M?) >?1(??) ??> 0 (3.51) then there exists a hybrid quantized feedback control policy that makes the system globally asymptotically...

Marwaha, Monika

2009-05-15T23:59:59.000Z

106

Fault Isolation for Spacecraft Systems: An Application to a Power Distribution  

E-Print Network [OSTI]

]. The EPS supplies power to spacecraft systems and pay- loads. The EPS schematic in Figure 1 shows a battery connected to a load bank through a set of switches, cir- cuit breakers and an inverter. Since the dynamics

Koutsoukos, Xenofon D.

107

Neural Network-Based Classification of Single-Phase Distribution Transformer Fault Data  

E-Print Network [OSTI]

The ultimate goal of this research is to develop an online, non-destructive, incipient fault detection system that is able to detect incipient faults in transformers and other electric equipment before the faults become catastrophic...

Zhang, Xujia

2006-08-16T23:59:59.000Z

108

ANALYTICAL REDUNDANCY FOR SYSTEMS WITH UNKNOWN INPUTS -APPLICATION TO FAULTS DETECTION  

E-Print Network [OSTI]

-00144067,version1-29Mar2014 Author manuscript, published in "Control Theory and Advanced Technology 9, 3 the inconsistency between the actual plant variables and the mathematical model. They are computed from the plant observations and with the model of this plant ; they are ideally zero but become non-zero if the actual system

Boyer, Edmond

109

A Reliable Fault-Tolerant Scheduling Algorithm for Real Time Embedded Systems  

E-Print Network [OSTI]

/EWICS Workshop on Dependable Embedded and Cyber-physical Systems) of the 32nd International Conference on Computer Safety, Reliability and Security, Toulouse : France (2013)" #12;2 Chafik Arar, Hamoudi Kalla, Salim Kalla, and Hocine Riadh Scheduling algorithm architecture specification distribution constraints

Paris-Sud XI, Université de

110

Simulation and Validation of Vapor Compression System Faults and Start-up/Shut-down Transients  

E-Print Network [OSTI]

The statistics from the US Department of Energy show that about one-third of the total consumption of electricity in the households and industries is due to the Air Conditioning and Refrigeration (AC & R) systems. This wide usage has prompted many...

Ayyagari, Balakrishna

2012-10-19T23:59:59.000Z

111

Diverse neural net solutions to a fault diagnosis problem \\Lambda  

E-Print Network [OSTI]

Abstract The development of a neural net system for fault diagnosis in a mar­ ine diesel engine system solution to a problem of fault diagnosis in a four­stroke marine diesel engine; that of early to recognise faults in simulated data from a diesel engine; specifically to classify combustion condition

Sharkey, Amanda

112

Superior model for fault tolerance computation in designing nano-sized circuit systems  

SciTech Connect (OSTI)

As CMOS technology scales nano-metrically, reliability turns out to be a decisive subject in the design methodology of nano-sized circuit systems. As a result, several computational approaches have been developed to compute and evaluate reliability of desired nano-electronic circuits. The process of computing reliability becomes very troublesome and time consuming as the computational complexity build ups with the desired circuit size. Therefore, being able to measure reliability instantly and superiorly is fast becoming necessary in designing modern logic integrated circuits. For this purpose, the paper firstly looks into the development of an automated reliability evaluation tool based on the generalization of Probabilistic Gate Model (PGM) and Boolean Difference-based Error Calculator (BDEC) models. The Matlab-based tool allows users to significantly speed-up the task of reliability analysis for very large number of nano-electronic circuits. Secondly, by using the developed automated tool, the paper explores into a comparative study involving reliability computation and evaluation by PGM and, BDEC models for different implementations of same functionality circuits. Based on the reliability analysis, BDEC gives exact and transparent reliability measures, but as the complexity of the same functionality circuits with respect to gate error increases, reliability measure by BDEC tends to be lower than the reliability measure by PGM. The lesser reliability measure by BDEC is well explained in this paper using distribution of different signal input patterns overtime for same functionality circuits. Simulation results conclude that the reliability measure by BDEC depends not only on faulty gates but it also depends on circuit topology, probability of input signals being one or zero and also probability of error on signal lines.

Singh, N. S. S., E-mail: narinderjit@petronas.com.my; Muthuvalu, M. S., E-mail: msmuthuvalu@gmail.com [Fundamental and Applied Sciences Department, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, Perak (Malaysia); Asirvadam, V. S., E-mail: vijanth-sagayan@petronas.com.my [Electrical and Electronics Engineering Department, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, Perak (Malaysia)

2014-10-24T23:59:59.000Z

113

Bisectional fault detection system  

DOE Patents [OSTI]

An apparatus, program product and method logically divide a group of nodes and causes node pairs comprising a node from each section to communicate. Results from the communications may be analyzed to determine performance characteristics, such as bandwidth and proper connectivity.

Archer, Charles Jens (Rochester, MN); Pinnow, Kurt Walter (Rochester, MN); Ratterman, Joseph D. (Rochester, MN); Smith, Brian Edward (Rochester, MN)

2012-02-14T23:59:59.000Z

114

IEEE TRANSACTIONS ON POWER ELECTRONICS 1 A Fault-Tolerant Switching Scheme for an Isolated  

E-Print Network [OSTI]

a model- reference adaptive system-based fault diagnosis algorithm for a VSI used as a PMSM drive system

Mazumder, Sudip K.

115

Colorado Regional Faults  

SciTech Connect (OSTI)

Citation Information: Originator: Earth Science &Observation Center (ESOC), CIRES, University of Colorado at Boulder Originator: Colorado Geological Survey (CGS) Publication Date: 2012 Title: Regional Faults Edition: First Publication Information: Publication Place: Earth Science & Observation Center, Cooperative Institute for Research in Environmental Science, University of Colorado, Boulder Publisher: Earth Science &Observation Center (ESOC), CIRES, University of Colorado at Boulder Description: This layer contains the regional faults of Colorado Spatial Domain: Extent: Top: 4543192.100000 m Left: 144385.020000 m Right: 754585.020000 m Bottom: 4094592.100000 m Contact Information: Contact Organization: Earth Science &Observation Center (ESOC), CIRES, University of Colorado at Boulder Contact Person: Khalid Hussein Address: CIRES, Ekeley Building Earth Science & Observation Center (ESOC) 216 UCB City: Boulder State: CO Postal Code: 80309-0216 Country: USA Contact Telephone: 303-492-6782 Spatial Reference Information: Coordinate System: Universal Transverse Mercator (UTM) WGS’1984 Zone 13N False Easting: 500000.00000000 False Northing: 0.00000000 Central Meridian: -105.00000000 Scale Factor: 0.99960000 Latitude of Origin: 0.00000000 Linear Unit: Meter Datum: World Geodetic System 1984 (WGS ’984) Prime Meridian: Greenwich Angular Unit: Degree Digital Form: Format Name: Shape file

Hussein, Khalid

2012-02-01T23:59:59.000Z

116

PL-MODT and PL-MODMC : two codes for reliability and availability analysis of complex technical systems using the fault tree modularization technique  

E-Print Network [OSTI]

The methodology used in the PL-MOD code has been extended to include the time-dependent behavior of the fault tree components. Four classes of components are defined to model time-dependent fault tree leaves. Mathematical ...

Modarres, M. (Mohammad)

1978-01-01T23:59:59.000Z

117

Power spectrum estimates of high frequency noise generated by high impedance arcing faults on distribution systems / by Thomas James Talley  

E-Print Network [OSTI]

the futility of using 60 Hz relaying techniques against a fault of high impedance. However, kJarrington [2 ] indicates that non-linear resistance at the arc may produce harmonics in the arc current. Kaufman and Page [5] predicted from the physics of the arc... radio frequency noise of measurable amplitude. However, he also pointed out a slightly more complex model of arcing than was considered by Kaufman and Page [ 5 ] who dealt only with the phenomenon of 60 Hz and a few harmonics, at relatively low...

Talley, Thomas James

1979-01-01T23:59:59.000Z

118

Coordinated Fault Tolerance for High-Performance Computing  

SciTech Connect (OSTI)

Our work to meet our goal of end-to-end fault tolerance has focused on two areas: (1) improving fault tolerance in various software currently available and widely used throughout the HEC domain and (2) using fault information exchange and coordination to achieve holistic, systemwide fault tolerance and understanding how to design and implement interfaces for integrating fault tolerance features for multiple layers of the software stack—from the application, math libraries, and programming language runtime to other common system software such as jobs schedulers, resource managers, and monitoring tools.

Dongarra, Jack; Bosilca, George; et al.

2013-04-08T23:59:59.000Z

119

Similarity Matching Techniques for Fault Diagnosis in Automotive Infotainment Electronics  

E-Print Network [OSTI]

Fault diagnosis has become a very important area of research during the last decade due to the advancement of mechanical and electrical systems in industries. The automobile is a crucial field where fault diagnosis is given a special attention. Due to the increasing complexity and newly added features in vehicles, a comprehensive study has to be performed in order to achieve an appropriate diagnosis model. A diagnosis system is capable of identifying the faults of a system by investigating the observable effects (or symptoms). The system categorizes the fault into a diagnosis class and identifies a probable cause based on the supplied fault symptoms. Fault categorization and identification are done using similarity matching techniques. The development of diagnosis classes is done by making use of previous experience, knowledge or information within an application area. The necessary information used may come from several sources of knowledge, such as from system analysis. In this paper similarity matching tec...

Kabir, Mashud

2009-01-01T23:59:59.000Z

120

Fault-tolerant distributed transactions for partitioned OLTP databases  

E-Print Network [OSTI]

This thesis presents Dtxn, a fault-tolerant distributed transaction system designed specifically for building online transaction processing (OLTP) databases. Databases have traditionally been designed as general purpose ...

Jones, Evan P. C. (Evan Philip Charles), 1981-

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Automated transmission line fault analysis using synchronized sampling at two ends  

SciTech Connect (OSTI)

This paper introduces a new approach to fault analysis using synchronized sampling. A digital fault recorder with Global Positioning System (GPS) satellite receiver is the source of data for this approach. Fault analysis functions, such as fault detection, classification and location are implemented for a transmission line using synchronized samples from two ends of a line. This technique can be extremely fast, selective and accurate, providing fault analysis performance that can not easily be matched by other known techniques.

Kezunovic, M. [Texas A and M Univ., College Station, TX (United States)] [Texas A and M Univ., College Station, TX (United States); Perunicic, B. [Lamar Univ., Beaumont, TX (United States)] [Lamar Univ., Beaumont, TX (United States)

1996-02-01T23:59:59.000Z

122

Automated transmission line fault analysis using synchronized sampling at two ends  

SciTech Connect (OSTI)

This paper introduces a new approach to fault analysis using synchronized sampling. A digital fault recorder with Global Positioning System (GPS) satellite receiver is the source of data for this approach. Fault analysis functions, such as fault detection, classification and location are implemented for a transmission line using synchronized samples from two ends of a line. This technique can be extremely fast, selective and accurate, providing fault analysis performance that can not easily be matched by other known techniques.

Kezunovic, M. [Texas A and M Univ., College Station, TX (United States); Perunicic, B. [Lamar Univ., Beaumont, TX (United States)

1995-12-31T23:59:59.000Z

123

Fault Detection, Identification and Accommodation for an Electro-hydraulic  

E-Print Network [OSTI]

Fault Detection, Identification and Accommodation for an Electro-hydraulic System: An Adaptive in electro-hydraulic systems. It is well known fact that any realistic model of a hydraulic system suffers, such a scheme becomes a natural choice for designing robust fault detection algorithms for electro-hydraulic

Yao, Bin

124

Automatic Fault Characterization via Abnormality-Enhanced Classification  

SciTech Connect (OSTI)

Enterprise and high-performance computing systems are growing extremely large and complex, employing hundreds to hundreds of thousands of processors and software/hardware stacks built by many people across many organizations. As the growing scale of these machines increases the frequency of faults, system complexity makes these faults difficult to detect and to diagnose. Current system management techniques, which focus primarily on efficient data access and query mechanisms, require system administrators to examine the behavior of various system services manually. Growing system complexity is making this manual process unmanageable: administrators require more effective management tools that can detect faults and help to identify their root causes. System administrators need timely notification when a fault is manifested that includes the type of fault, the time period in which it occurred and the processor on which it originated. Statistical modeling approaches can accurately characterize system behavior. However, the complex effects of system faults make these tools difficult to apply effectively. This paper investigates the application of classification and clustering algorithms to fault detection and characterization. We show experimentally that naively applying these methods achieves poor accuracy. Further, we design novel techniques that combine classification algorithms with information on the abnormality of application behavior to improve detection and characterization accuracy. Our experiments demonstrate that these techniques can detect and characterize faults with 65% accuracy, compared to just 5% accuracy for naive approaches.

Bronevetsky, G; Laguna, I; de Supinski, B R

2010-12-20T23:59:59.000Z

125

The dynamics of oceanic transform faults : constraints from geophysical, geochemical, and geodynamical modeling  

E-Print Network [OSTI]

Segmentation and crustal accretion at oceanic transform fault systems are investigated through a combination of geophysical data analysis and geodynamical and geochemical modeling. Chapter 1 examines the effect of fault ...

Gregg, Patricia Michelle Marie

2008-01-01T23:59:59.000Z

126

E-Print Network 3.0 - automatic fault tree Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Search Sample search results for: automatic fault tree Page: << < 1 2 3 4 5 > >> 1 Computer diagnosis systems grounded on hand-crafted fault trees are wide-spread in industrial...

127

Analysis of electrical signatures in synchronous generators characterized by bearing faults  

E-Print Network [OSTI]

Synchronous generators play a vital role in power systems. One of the major mechanical faults in synchronous generators is related to bearings. The popular vibration analysis method has been utilized to detect bearing faults for years. However...

Choi, Jae-Won

2009-05-15T23:59:59.000Z

128

Fault Locating, Prediction and Protection (FLPPS)  

SciTech Connect (OSTI)

One of the main objectives of this DOE-sponsored project was to reduce customer outage time. Fault location, prediction, and protection are the most important aspects of fault management for the reduction of outage time. In the past most of the research and development on power system faults in these areas has focused on transmission systems, and it is not until recently with deregulation and competition that research on power system faults has begun to focus on the unique aspects of distribution systems. This project was planned with three Phases, approximately one year per phase. The first phase of the project involved an assessment of the state-of-the-art in fault location, prediction, and detection as well as the design, lab testing, and field installation of the advanced protection system on the SCE Circuit of the Future located north of San Bernardino, CA. The new feeder automation scheme, with vacuum fault interrupters, will limit the number of customers affected by the fault. Depending on the fault location, the substation breaker might not even trip. Through the use of fast communications (fiber) the fault locations can be determined and the proper fault interrupting switches opened automatically. With knowledge of circuit loadings at the time of the fault, ties to other circuits can be closed automatically to restore all customers except the faulted section. This new automation scheme limits outage time and increases reliability for customers. The second phase of the project involved the selection, modeling, testing and installation of a fault current limiter on the Circuit of the Future. While this project did not pay for the installation and testing of the fault current limiter, it did perform the evaluation of the fault current limiter and its impacts on the protection system of the Circuit of the Future. After investigation of several fault current limiters, the Zenergy superconducting, saturable core fault current limiter was selected for installation. Because of some testing problems with the Zenergy fault current limiter, installation was delayed until early 2009 with it being put into operation on March 6, 2009. A malfunction of the FCL controller caused the DC power supply to the superconducting magnet to be turned off. This inserted the FCL impedance into the circuit while it was in normal operation causing a voltage resonance condition. While these voltages never reached a point where damage would occur on customer equipment, steps were taken to insure this would not happen again. The FCL was reenergized with load on December 18, 2009. A fault was experienced on the circuit with the FCL in operation on January 14, 2010. The FCL operated properly and reduced the fault current by about 8%, what was expected from tests and modeling. As of the end of the project, the FCL was still in operation on the circuit. The third phase of the project involved the exploration of several advanced protection ideas that might be at a state where they could be applied to the Circuit of the Future and elsewhere in the SCE electrical system. Based on the work done as part of the literature review and survey, as well as a number of internal meetings with engineering staff at SCE, a number of ideas were compiled. These ideas were then evaluated for applicability and ability to be applied on the Circuit of the Future in the time remaining for the project. Some of these basic ideas were implemented on the circuit including measurement of power quality before and after the FCL. It was also decided that we would take what was learned as part of the Circuit of the Future work and extend it to the next generation circuit protection for SCE. Also at this time, SCE put in a proposal to the DOE for the Irvine Smart Grid Demonstration using ARRA funding. SCE was successful in obtaining funding for this proposal, so it was felt that exploration of new protection schemes for this Irvine Smart Grid Demonstration would be a good use of the project resources. With this in mind, a protection system that uses fault interrupting switches, hi

Yinger, Robert, J.; Venkata, S., S.; Centeno, Virgilio

2010-09-30T23:59:59.000Z

129

The detection of high impedance faults using random fault behavior  

E-Print Network [OSTI]

the energy 120 100 80 O& 60 C Lu 40 20 100 200 300 400 500 600 700 800 900 1000 1100 Cycle Number Figure 1. Typical lugh frequency energy per cycle for an arcing fault. 23 . 055 . 050 . 025 Ol . 020 . 01 5 . 010 . 005 25 50 75 100 125... 150 175 200 225 250 275 500 Cycle Number Figure 2. Typical high frequency energy per cycle for a normal system. 24 3 Vl c uj 2 100 200 300 400 500 600 700 800 900 '1000 1100 Cycle Number Figure 3. Typical high frequency energy per cycle for a...

Carswell, Patrick Wayne

1988-01-01T23:59:59.000Z

130

Fuzzy Pattern Recognition Based Fault Diagnosis Rafik Bensaadi1  

E-Print Network [OSTI]

Fuzzy Pattern Recognition Based Fault Diagnosis Rafik Bensaadi1 , Leïla H. Mouss1 , Mohamed D in this paper the design of a Fuzzy Pattern Recognition System (FPRS) that solves, in real time, the main. Keywords: Diagnosis, fault detection, pattern recognition, fuzzy control, conjugate gradients, complex

Boyer, Edmond

131

Symbolic identification for fault detection in aircraft gas turbine engines  

E-Print Network [OSTI]

Symbolic identification for fault detection in aircraft gas turbine engines S Chakraborty, S Sarkar and computationally inexpensive technique of component-level fault detection in aircraft gas-turbine engines identification, gas turbine engines, language-theoretic analysis 1 INTRODUCTION The propulsion system of modern

Ray, Asok

132

Arcing fault in sub-distribution branch circuits  

SciTech Connect (OSTI)

It's well known the importance of short-circuit current evaluation for the design of any power system. Every system is subject to faults, moreover short-circuits and ground faults can be expected in any point. Even if the maximum and minimum values are generally defined with reference at a bolted-fault, bolted short-circuits are rare and the fault usually involves arcing and burning; particularly the limit value of minimum short-circuit depends really on arcing-fault. In earlier experimental investigations into the functional simulation of insulation loss, in branch circuit conductors, the authors chose to normalize the arcing-fault simulation to be used in laboratory tests. This conventional simulation allows characterization of this intrinsically random phenomenon by means of a probabilistic approach, in order to define in statistical terms the expected short circuit value. The authors examine more closely the arcing-fault in the design of sub distribution branch-circuits as weak points of the installation. In fact, what they propose are straightforward criteria, whether in the structure of the system or in the coordination of protection, which afford a more rational control on arcing-fault.

Parise, G.; Grasseli, U.; Luozzo, V. Di (Univ. di Roma, Rome (Italy). Dept. di Ingegneria Elettrica)

1993-04-01T23:59:59.000Z

133

Transition-fault test generation  

E-Print Network [OSTI]

. One way to detect these timing defects is to apply test patterns to the integrated circuit that are generated using the transition-fault model. Unfortunately, industry's current transition-fault test generation schemes produce test sets that are too...

Cobb, Bradley Douglas

2013-02-22T23:59:59.000Z

134

Spectrum-based Fault Diagnosis for Service-Oriented Software Systems Cuiting Chen, Hans-Gerhard Gross and Andy Zaidman  

E-Print Network [OSTI]

-Gerhard Gross and Andy Zaidman Delft University of Technology, the Netherlands Email: {cuiting assurance approaches useless. In order to enable service systems to recover from and adapt to runtime of the traditional (offline) quality assurance methods useless [3]. In particular, many failures only emerge during

Zaidman, Andy

135

RELIABILITY ANALYSIS IN A FAULT TOLERANT CONTROL STRATEGY DEDICATED TO ACTIVE POWER FILTER  

E-Print Network [OSTI]

RELIABILITY ANALYSIS IN A FAULT TOLERANT CONTROL STRATEGY DEDICATED TO ACTIVE POWER FILTER P. WEBER on reliability analysis dedicated to an active power filter. Once a fault has been detected and isolated, all reliability indicate the optimal structure. Keywords: Fault Tolerant Control, System Reliability, Active power

Paris-Sud XI, Université de

136

What about vulnerability to a fault attack of the Miller algorithm during an  

E-Print Network [OSTI]

What about vulnerability to a fault attack of the Miller algorithm during an Identity Based is to analyse the weakness of the Miller algorithm when it undergoes a fault attack. We prove that the Miller algorithm is vulnerable to a fault attack which is valid in all coordinate systems, through the resolution

Paris-Sud XI, Université de

137

What About Vulnerability to a Fault Attack of the Miller's Algorithm During an  

E-Print Network [OSTI]

What About Vulnerability to a Fault Attack of the Miller's Algorithm During an Identity Based of this article is to analyse the weakness of the Miller's algorithm when it undergoes a fault attack. We prove that the Miller's algorithm is vulnerable to a fault attack which is valid in all coordinate systems, through

Paris-Sud XI, Université de

138

Optimal fault location  

E-Print Network [OSTI]

for the pre-selected time out to pass and initiate reclosing again. If after selected number of attempts of reclosing, fault is still present, breaker lockout is taking place. There will be no more attempts to reclose automatically the breaker again....2: Trip and reclose sequences on a single breaker In the case of breaker lockout the assumption taken by the operators is that fault is permanent. Special order is issued to the maintenance for the breaker to be closed back in 4 again once...

Knezev, Maja

2009-05-15T23:59:59.000Z

139

Optimal fault location  

E-Print Network [OSTI]

for the pre-selected time out to pass and initiate reclosing again. If after selected number of attempts of reclosing, fault is still present, breaker lockout is taking place. There will be no more attempts to reclose automatically the breaker again....2: Trip and reclose sequences on a single breaker In the case of breaker lockout the assumption taken by the operators is that fault is permanent. Special order is issued to the maintenance for the breaker to be closed back in 4 again once...

Knezev, Maja

2008-10-10T23:59:59.000Z

140

Computer hardware fault administration  

DOE Patents [OSTI]

Computer hardware fault administration carried out in a parallel computer, where the parallel computer includes a plurality of compute nodes. The compute nodes are coupled for data communications by at least two independent data communications networks, where each data communications network includes data communications links connected to the compute nodes. Typical embodiments carry out hardware fault administration by identifying a location of a defective link in the first data communications network of the parallel computer and routing communications data around the defective link through the second data communications network of the parallel computer.

Archer, Charles J. (Rochester, MN); Megerian, Mark G. (Rochester, MN); Ratterman, Joseph D. (Rochester, MN); Smith, Brian E. (Rochester, MN)

2010-09-14T23:59:59.000Z

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

An algorithm for faulted phase and feeder selection under high impedance fault conditions  

E-Print Network [OSTI]

. Summary SUMMARY AND CONCLUSIONS REFERENCES . SUPPLEMENTAL SOURCES CONSULTED APPENDIX A VITA 57 58 59 59 60 62 68 70 vn LIST OF TABLES Table II. Ihh Comparison of fault-generated phases during arcing fault test Comparison of fault...-generated phases during arcing fault test Comparison of fault-generated phases during arcing fault test activity on activity on activity on faulted and unfaulted Page 45 faulted and unfaulted 46 faulted and unfaulted 47 vu1 LIST OF FIGURES Figure l...

Benner, Carl Lee

1988-01-01T23:59:59.000Z

142

Undulator Hall Air Temperature Fault Scenarios  

SciTech Connect (OSTI)

Recent experience indicates that the LCLS undulator segments must not, at any time following tuning, be allowed to change temperature by more than about {+-}2.5 C or the magnetic center will irreversibly shift outside of acceptable tolerances. This vulnerability raises a concern that under fault conditions the ambient temperature in the Undulator Hall might go outside of the safe range and potentially could require removal and retuning of all the segments. In this note we estimate changes that can be expected in the Undulator Hall air temperature for three fault scenarios: (1) System-wide power failure; (2) Heating Ventilation and Air Conditioning (HVAC) system shutdown; and (3) HVAC system temperature regulation fault. We find that for either a system-wide power failure or an HVAC system shutdown (with the technical equipment left on), the short-term temperature changes of the air would be modest due to the ability of the walls and floor to act as a heat ballast. No action would be needed to protect the undulator system in the event of a system-wide power failure. Some action to adjust the heat balance, in the case of the HVAC power failure with the equipment left on, might be desirable but is not required. On the other hand, a temperature regulation failure of the HVAC system can quickly cause large excursions in air temperature and prompt action would be required to avoid damage to the undulator system.

Sevilla, J.; Welch, J.; /SLAC; ,

2010-11-17T23:59:59.000Z

143

Area balance and strain in an extensional fault system: Strategies for improved oil recovery in fractured chalk, Gilbertown Field, southwestern Alabama. Final report, March 1996--September 1998  

SciTech Connect (OSTI)

This project was designed to analyze the structure of Mesozoic and Tertiary strata in Gilbertown Field and adjacent areas to suggest ways in which oil recovery can be improved. The Eutaw Formation comprises 7 major flow units and is dominated by low-resistivity, low-contrast play that is difficult to characterize quantitatively. Selma chalk produces strictly from fault-related fractures that were mineralized as warm fluid migrated from deep sources. Resistivity, dipmeter, and fracture identification logs corroborate that deformation is concentrated in the hanging-wall drag zones. New area balancing techniques were developed to characterize growth strata and confirm that strain is concentrated in hanging-wall drag zones. Curvature analysis indicates that the faults contain numerous fault bends that influence fracture distribution. Eutaw oil is produced strictly from footwall uplifts, whereas Selma oil is produced from fault-related fractures. Clay smear and mineralization may be significant trapping mechanisms in the Eutaw Formation. The critical seal for Selma reservoirs, by contrast, is where Tertiary clay in the hanging wall is juxtaposed with poorly fractured Selma chalk in the footwall. Gilbertown Field can be revitalized by infill drilling and recompletion of existing wells. Directional drilling may be a viable technique for recovering untapped oil from Selma chalk. Revitalization is now underway, and the first new production wells since 1985 are being drilled in the western part of the field.

Pashin, J.C.; Raymond, D.E.; Rindsberg, A.K.; Alabi, G.G.; Carroll, R.E.; Groshong, R.H.; Jin, G.

1998-12-01T23:59:59.000Z

144

assembly line fault: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of fault data to verify that all elements of the protection system Siegel, Mel 190 Bucket brigades on in-tree assembly networks John J. Bartholdi III a,*, Donald D. Eisenstein...

145

Development of Characterization Technology for Fault Zone Hydrology  

SciTech Connect (OSTI)

Several deep trenches were cut, and a number of geophysical surveys were conducted across the Wildcat Fault in the hills east of Berkeley, California. The Wildcat Fault is believed to be a strike-slip fault and a member of the Hayward Fault System, with over 10 km of displacement. So far, three boreholes of ~;; 150m deep have been core-drilled and borehole geophysical logs were conducted. The rocks are extensively sheared and fractured; gouges were observed at several depths and a thick cataclasitic zone was also observed. While confirming some earlier, published conclusions from shallow observations about Wildcat, some unexpected findings were encountered. Preliminary analysis indicates that Wildcat near the field site consists of multiple faults. The hydraulic test data suggest the dual properties of the hydrologic structure of the fault zone. A fourth borehole is planned to penetrate the main fault believed to lie in-between the holes. The main philosophy behind our approach for the hydrologic characterization of such a complex fractured system is to let the system take its own average and monitor a long term behavior instead of collecting a multitude of data at small length and time scales, or at a discrete fracture scale and to ?up-scale,? which is extremely tenuous.

Karasaki, Kenzi; Onishi, Tiemi; Gasperikova, Erika; Goto, Junichi; Tsuchi, Hiroyuki; Miwa, Tadashi; Ueta, Keiichi; Kiho, Kenzo; MIyakawa, Kimio

2010-08-06T23:59:59.000Z

146

Fault-tolerant, Universal Adiabatic Quantum Computation  

E-Print Network [OSTI]

Quantum computation has revolutionary potential for speeding computational tasks such as factoring and simulating quantum systems, but the task of constructing a quantum computer is daunting. Adiabatic quantum computation and other ``hands-off" approaches relieve the need for rapid, precise pulsing to control the system, inspiring at least one high-profile effort to realize a hands-off quantum computing device. But is hands-off incompatible with fault-tolerant? Concerted effort and many innovative ideas have not resolved this question but have instead deepened it, linking it to fundamental problems in quantum complexity theory. Here we present a hands-off approach that is provably (a) capable of scalable universal quantum computation in a non-degenerate ground state and (b) fault-tolerant against an analogue of the usual local stochastic fault model. A satisfying physical and numerical argument indicates that (c) it is also fault-tolerant against thermal excitation below a threshold temperature independent of the computation size.

Ari Mizel

2014-03-30T23:59:59.000Z

147

The application of satellite time references to HVDC fault location  

SciTech Connect (OSTI)

An HVdc fault location scheme is described which relies on very precise detection of the time of arrival of fault created surges at both ends of the line. Such detection is achieved by a very accurate data acquisition and processing system combined with the time reference signals provided by a global positioning system receiver. Extensive digital simulation is carried out to determine the voltage and current waveforms, to identify the main sources of error and suggest possible compensation techniques.

Dewe, M.B.; Sankar, S.; Arrillaga, J. (Univ. of Canterbury, Christchurch (New Zealand))

1993-07-01T23:59:59.000Z

148

Completing fault models for abductive diagnosis  

SciTech Connect (OSTI)

In logic-based diagnosis, the consistency-based method is used to determine the possible sets of faulty devices. If the fault models of the devices are incomplete or nondeterministic, then this method does not necessarily yield abductive explanations of system behavior. Such explanations give additional information about faulty behavior and can be used for prediction. Unfortunately, system descriptions for the consistency-based method are often not suitable for abductive diagnosis. Methods for completing the fault models for abductive diagnosis have been suggested informally by Poole and by Cox et al. Here we formalize these methods by introducing a standard form for system descriptions. The properties of these methods are determined in relation to consistency-based diagnosis and compared to other ideas for integrating consistency-based and abductive diagnosis.

Knill, E. (Los Alamos National Lab., NM (United States)); Cox, P.T.; Pietrzykowski, T. (Technical Univ., NS (Canada))

1992-11-05T23:59:59.000Z

149

E-Print Network 3.0 - algorithmic fault tree Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

based on fault trees derived using the IFT induction algorithm. The test system is a robot arm... University College Galway, Ireland. 12;INDUCTION AND THE IFT ALGORITHM To...

150

Fault-tree construction and calculations on a microcomputer  

E-Print Network [OSTI]

Figure 17 - Program Overview Screen Figure 18 ? Main Menu Screen Figure 19 ? Invalid Command Screen Figure 20 - First Usage of Disk Screen Figure 21 ? Fault-tree Name Screen Figure 22 - Invalid Fault-tree Name Screen Fi gure 23 ? TOP EVENT Label... to do? Fi gure 19. Inval i d Command Screen 53 CREATE - This command allows the user to build a new fault tree. After a CREATE command is entered, the system wi 1 1 display the screen in Figure 20. This question is asked in order to determine...

Beckmann, Jeffery Linn

1985-01-01T23:59:59.000Z

151

Effect of HVDC line faults on transient torsional torques of turbine-generator shafts  

SciTech Connect (OSTI)

This paper investigates the effects of HVdc line faults, line de-energization, and line re-energization on the transient torsional stresses of steam turbine-generator (T-G) units. The studies are conducted on a bipole HVdc system which connects a T-G set to a large ac system. The shaft transient stresses of the T-G set as a result of HVac line fault, fault clearing, and automatic reclosure are also determined when the HVdc transmission system is replaced by an equivalent double-line HVac system. The EMTDC program is used for the simulation studies. The studies conclude that transient shaft stresses as a result of HVdc line fault and its subsequent switching events are (1) significantly less severe than those of HVac faults and subsequent switchings, and (2) not sensitive to the fault location and disturbance duration.

Shi, W. (Xi'an Jiaotong Univ. (China). Dept. of Electrical Engineering); Iravani, M.R. (Univ. of Toronto, Ontario (Canada). Dept. of Electrical Engineering)

1994-08-01T23:59:59.000Z

152

Fault current limiter  

DOE Patents [OSTI]

A fault current limiter (FCL) includes a series of high permeability posts for collectively define a core for the FCL. A DC coil, for the purposes of saturating a portion of the high permeability posts, surrounds the complete structure outside of an enclosure in the form of a vessel. The vessel contains a dielectric insulation medium. AC coils, for transporting AC current, are wound on insulating formers and electrically interconnected to each other in a manner such that the senses of the magnetic field produced by each AC coil in the corresponding high permeability core are opposing. There are insulation barriers between phases to improve dielectric withstand properties of the dielectric medium.

Darmann, Francis Anthony

2013-10-08T23:59:59.000Z

153

Performance Study of Enhanced Auto-Associative Neural Networks For Sensor Fault Detection  

E-Print Network [OSTI]

- INTRODUCTION When sensors malfunction, control systems become unreliable. Even with the most sophisticated instruments and control algorithms, a control decision based on faulty data will likely lead to incorrect control actions. ?Sensor Fault Detection...? is usually considered as a subset of fault detection. One of the well known approaches in Fault Detection is the model based approach in which a computational model is designed to predict the real system output while receiving the same input ([7], [8...

Najafi, M.; Culp, C.; Langari, R.

2004-01-01T23:59:59.000Z

154

Occupancy Based Fault Detection on Building Level - a Feasibility Study  

E-Print Network [OSTI]

-going commissioning and fault detection and diagnostics (FDD) has been performed to improve the current situation of building problems by comparing measured building performance with design predictions [Portland 2003]. For fault detection, different methods... conference on building commissioning, Portland Energy Conservation. Portland. 2003. Methods for automated and continuous commissioning of building systems. US department of commerce, Portland energy conservation inc. Schijndel, A.W.M. van, 2008...

Tuip, B.; Houten, M.; Trcka, M.; Hensen, M.

2010-01-01T23:59:59.000Z

155

Position Paper for NSF-NIST-USCAR Workshop on Cyber-Physical Systems Fault Diagnosis and Prognosis in a Network of Embedded Systems in Automotive Vehicles  

E-Print Network [OSTI]

and Engineering, Storrs, CT 06268 3GM Research Center, General Motors Corporation, Warren, MI 48090 I. Problem poor vehicle performance increases maintenance costs to customers and warranty costs to automotive industry. The development of methods for enhancing the reliability of embedded systems of heterogeneous

Rajkumar, Ragunathan "Raj"

156

Microcomputer applications of, and modifications to, the modular fault trees  

SciTech Connect (OSTI)

The LaSalle Probabilistic Risk Assessment was the first major application of the modular logic fault trees after the IREP program. In the process of performing the analysis, many errors were discovered in the fault tree modules that led to difficulties in combining the modules to form the final system fault trees. These errors are corrected in the revised modules listed in this report. In addition, the application of the modules in terms of editing them and forming them into the system fault trees was inefficient. Originally, the editing had to be done line by line and no error checking was performed by the computer. This led to many typos and other logic errors in the construction of the modular fault tree files. Two programs were written to help alleviate this problem: (1) MODEDIT - This program allows an operator to retrieve a file for editing, edit the file for the plant specific application, perform some general error checking while the file is being modified, and store the file for later use, and (2) INDEX - This program checks that the modules that are supposed to form one fault tree all link up appropriately before the files are,loaded onto the mainframe computer. Lastly, the modules were not designed for relay type logic common in BWR designs but for solid state type logic. Some additional modules were defined for modeling relay logic, and an explanation and example of their use are included in this report.

Zimmerman, T.L.; Graves, N.L.; Payne, A.C. Jr.; Whitehead, D.W. [Sandia National Labs., Albuquerque, NM (United States)] [Sandia National Labs., Albuquerque, NM (United States)

1994-10-01T23:59:59.000Z

157

Coordinated Fault-Tolerance for High-Performance Computing Final Project Report  

SciTech Connect (OSTI)

With the Coordinated Infrastructure for Fault Tolerance Systems (CIFTS, as the original project came to be called) project, our aim has been to understand and tackle the following broad research questions, the answers to which will help the HEC community analyze and shape the direction of research in the field of fault tolerance and resiliency on future high-end leadership systems. #15; Will availability of global fault information, obtained by fault information exchange between the different HEC software on a system, allow individual system software to better detect, diagnose, and adaptively respond to faults? If fault-awareness is raised throughout the system through fault information exchange, is it possible to get all system software working together to provide a more comprehensive end-to-end fault management on the system? #15; What are the missing fault-tolerance features that widely used HEC system software lacks today that would inhibit such software from taking advantage of systemwide global fault information? #15; What are the practical limitations of a systemwide approach for end-to-end fault management based on fault awareness and coordination? #15; What mechanisms, tools, and technologies are needed to bring about fault awareness and coordination of responses on a leadership-class system? #15; What standards, outreach, and community interaction are needed for adoption of the concept of fault awareness and coordination for fault management on future systems? Keeping our overall objectives in mind, the CIFTS team has taken a parallel fourfold approach. #15; Our central goal was to design and implement a light-weight, scalable infrastructure with a simple, standardized interface to allow communication of fault-related information through the system and facilitate coordinated responses. This work led to the development of the Fault Tolerance Backplane (FTB) publish-subscribe API specification, together with a reference implementation and several experimental implementations on top of existing publish-subscribe tools. #15; We enhanced the intrinsic fault tolerance capabilities representative implementations of a variety of key HPC software subsystems and integrated them with the FTB. Targeting software subsystems included: MPI communication libraries, checkpoint/restart libraries, resource managers and job schedulers, and system monitoring tools. #15; Leveraging the aforementioned infrastructure, as well as developing and utilizing additional tools, we have examined issues associated with expanded, end-to-end fault response from both system and application viewpoints. From the standpoint of system operations, we have investigated log and root cause analysis, anomaly detection and fault prediction, and generalized notification mechanisms. Our applications work has included libraries for fault-tolerance linear algebra, application frameworks for coupled multiphysics applications, and external frameworks to support the monitoring and response for general applications. #15; Our final goal was to engage the high-end computing community to increase awareness of tools and issues around coordinated end-to-end fault management.

Panda, Dhabaleswar Kumar [The Ohio State University; Beckman, Pete

2011-07-01T23:59:59.000Z

158

Hot Pot Detail - Evidence of Quaternary Faulting  

SciTech Connect (OSTI)

Compilation of published data, field observations and photo interpretation relevant to Quaternary faulting at Hot Pot.

Lane, Michael

2013-06-27T23:59:59.000Z

159

Hot Pot Detail - Evidence of Quaternary Faulting  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Compilation of published data, field observations and photo interpretation relevant to Quaternary faulting at Hot Pot.

Lane, Michael

160

Fault-tolerant rotary actuator  

DOE Patents [OSTI]

A fault-tolerant actuator module, in a single containment shell, containing two actuator subsystems that are either asymmetrically or symmetrically laid out is provided. Fault tolerance in the actuators of the present invention is achieved by the employment of dual sets of equal resources. Dual resources are integrated into single modules, with each having the external appearance and functionality of a single set of resources.

Tesar, Delbert

2006-10-17T23:59:59.000Z

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Passive fault current limiting device  

DOE Patents [OSTI]

A passive current limiting device and isolator is particularly adapted for use at high power levels for limiting excessive currents in a circuit in a fault condition such as an electrical short. The current limiting device comprises a magnetic core wound with two magnetically opposed, parallel connected coils of copper, a high temperature superconductor or other electrically conducting material, and a fault element connected in series with one of the coils. Under normal operating conditions, the magnetic flux density produced by the two coils cancel each other. Under a fault condition, the fault element is triggered to cause an imbalance in the magnetic flux density between the two coils which results in an increase in the impedance in the coils. While the fault element may be a separate current limiter, switch, fuse, bimetal strip or the like, it preferably is a superconductor current limiter conducting one-half of the current load compared to the same limiter wired to carry the total current of the circuit. The major voltage during a fault condition is in the coils wound on the common core in a preferred embodiment. 6 figs.

Evans, D.J.; Cha, Y.S.

1999-04-06T23:59:59.000Z

162

Internal structure of the Kern Canyon Fault, California: a deeply exhumed strike-slip fault  

E-Print Network [OSTI]

Deformation and mineral alteration adjacent to a 2 km long segment of the Kern Canyon fault near Lake Isabella, California are studied to characterize the internal structure of the fault zone and to understand the development of fault structure...

Neal, Leslie Ann

2002-01-01T23:59:59.000Z

163

Development of Characterization Technology for Fault Zone Hydrology  

E-Print Network [OSTI]

TECHNOLOGY FOR FAULT ZONE HYDROLOGY Kenzi Karasaki Lawrencefor characterizing the hydrology of fault zones, recognizingstructure of faults to hydrology, that it still may be

Karasaki, Kenzi

2010-01-01T23:59:59.000Z

164

Accident Fault Trees for Defense Waste Processing Facility  

SciTech Connect (OSTI)

The purpose of this report is to document fault tree analyses which have been completed for the Defense Waste Processing Facility (DWPF) safety analysis. Logic models for equipment failures and human error combinations that could lead to flammable gas explosions in various process tanks, or failure of critical support systems were developed for internal initiating events and for earthquakes. These fault trees provide frequency estimates for support systems failures and accidents that could lead to radioactive and hazardous chemical releases both on-site and off-site. Top event frequency results from these fault trees will be used in further APET analyses to calculate accident risk associated with DWPF facility operations. This report lists and explains important underlying assumptions, provides references for failure data sources, and briefly describes the fault tree method used. Specific commitments from DWPF to provide new procedural/administrative controls or system design changes are listed in the ''Facility Commitments'' section. The purpose of the ''Assumptions'' section is to clarify the basis for fault tree modeling, and is not necessarily a list of items required to be protected by Technical Safety Requirements (TSRs).

Sarrack, A.G.

1999-06-22T23:59:59.000Z

165

A Probability Extension of PCA to Detect and Diagnose Sensor Faults in Air Handling Units  

E-Print Network [OSTI]

Due to sensor faults, it is a challenge to successfully detect and diagnose component faults in HVAC systems. The Principal Component Analysis (PCA) method has become a popular method to tackle this problem in recent years, but PCA is not capable...

Li, Z.

2011-01-01T23:59:59.000Z

166

Establishment of the mathematical model for diagnosing the engine valve faults by genetic  

E-Print Network [OSTI]

in a six- cylinders/four-stroke cycle diesel engine, i.e. normal condition, valve-tappet clearance and gas for diagnosing the faults occurring in rotor-bearing system, but current computer programs cannot easily distinguish the orbit shapes automatically. Likewise, when diagnosing the faults in a rolling-element bearing

Fernandez, Thomas

167

Online Model-based Diagnosis for Multiple, Intermittent and Interaction Faults  

E-Print Network [OSTI]

convert, move and process materials or objects. Examples of such systems are printers, refineries. An interaction fault is present if a set of components operating on the same object, damage the object even though each component alone produces non noticeable damage. Introducing interaction faults is much

de Kleer, Johan

168

Fault Evolution in Photovoltaic Array During Night-to-Day Transition  

E-Print Network [OSTI]

amount of energy loss. For example, in UK domestic PV systems, the annual energy loss due to faults in PV Fault detection and protection in solar photovoltaic (PV) arrays are important tasks for improving PV at night when there is no solar irradiance. During sunrise, the irradiance on the PV array increases slowly

Lehman, Brad

169

12 PLANET EARTH Summer 2014 Earthquake progression with time along the North Anatolian Fault. The current sequence started with the 1939 earthquake and has progressed westwards towards Istanbul.  

E-Print Network [OSTI]

that to the amount of energy being stored on the fault. Finally, the modelling team will link these observations12 PLANET EARTH Summer 2014 Earthquake progression with time along the North Anatolian Fault in the world: the North Anatolian Fault. This is a system of large fractures within the Earth on which energy

Brierley, Andrew

170

A Rectilinear-Monotone Polygonal Fault Block Model for Fault-Tolerant Minimal Routing  

E-Print Network [OSTI]

]. In rectangular model, all faulty nodes are grouped in dis- jointed, rectangular areas, called fault blocksA Rectilinear-Monotone Polygonal Fault Block Model for Fault-Tolerant Minimal Routing in Mesh Dajin Wang, Member, IEEE Abstract--We propose a new fault block model, Minimal-Connected-Component (MCC

Wang, Dajin

171

A New Approach to Commissioning of the VAV Control System  

E-Print Network [OSTI]

. Hyvarinen, S. Karki. Building optimization and fault diagnosis source book. IEA Annex (1996) 25 [3] H. Yoshida, T. Iwami, H. Yuzawa, M. Suzuki. Typical faults of airconditioning systems and fault detection by ARX model and extended Kalman Filter. ASHRAE...

Han, Z.; Xia, C.; Zhu, Y.; Xu, G.

2006-01-01T23:59:59.000Z

172

High temperature superconducting fault current limiter  

DOE Patents [OSTI]

A fault current limiter for an electrical circuit is disclosed. The fault current limiter includes a high temperature superconductor in the electrical circuit. The high temperature superconductor is cooled below its critical temperature to maintain the superconducting electrical properties during operation as the fault current limiter. 15 figs.

Hull, J.R.

1997-02-04T23:59:59.000Z

173

Electrical faults modeling of the photovoltaic generator Wail Rezgui1  

E-Print Network [OSTI]

Electrical faults modeling of the photovoltaic generator Wail Rezgui1 , Leïla-Hayet Mouss1 , Kinza is captured by the generator and direct electrical energy resulting from the conversion of the solar radiation of a problem at the generator. Practically, the existence of electrical defects on this type of systems can

Boyer, Edmond

174

Test Case Purification for Improving Fault Localization Jifeng Xuan  

E-Print Network [OSTI]

Test Case Purification for Improving Fault Localization Jifeng Xuan INRIA Lille - Nord Europe Lille on the execution trace of test cases. Failing test cases and their assertions form test oracles for the failing behavior of the system under analysis. In this paper, we propose a novel concept of spectrum driven test

175

Fault Tolerance on Interleaved inverter with Magnetic couplers  

E-Print Network [OSTI]

Fault Tolerance on Interleaved inverter with Magnetic couplers K.Guépratte, D.Frey, P-O.Jeannin, H Electrical Engineering (G2Elab), Thales Systemes Aeroportes Abstract- The paper focuses on a new control strategy for improving the availability of power electronic converters based on interleaved structures

Paris-Sud XI, Université de

176

Outlier Detection Rules for Fault Detection in Solar Photovoltaic Arrays  

E-Print Network [OSTI]

Abstract-- Solar photovoltaic (PV) arrays are unique power sources that may have uncleared fault current of solar photovoltaic (PV) systems. Different from traditional power sources, solar PV array is unique devices (OCPD). This may be caused by non-linear output characteristics of solar PV arrays, low irradiance

Lehman, Brad

177

Software Fault Diagnosis Peter Zoeteweij  

E-Print Network [OSTI]

Lab, Faculty of Electrical Engineering, Mathematics, and Computer Science, Delft University-to-day basis is constantly growing. Combined with a practically constant rate of faults per line of code in the software development cycle, which aim at exposing such discrepancies. In this context, automated diagnosis

Zoeteweij, Peter

178

Fault tolerant pulse synchronization  

E-Print Network [OSTI]

oscillators found in nature are fireflies flashing in unison and pacemaker cells of the heart. Such systems consist of identical units which communicate by exchanging ?firing? messages, which is the only communication 3 between them. An oscillator... is characterized by a phase which varies with time. The phase rises from zero to a certain threshold and when the oscillator hits the threshold it ?fires? and this firing is seen by all other oscillators in the system. Whenever one oscillator fires, the other...

Deconda, Keerthi

2009-05-15T23:59:59.000Z

179

Proactive Fault Tolerance for HPC with Xen Virtualization  

SciTech Connect (OSTI)

with thousands of processors. At such large counts of compute nodes, faults are becoming common place. Current techniques to tolerate faults focus on reactive schemes to recover from faults and generally rely on a checkpoint/restart mechanism. Yet, in today's systems, node failures can often be anticipated by detecting a deteriorating health status. Instead of a reactive scheme for fault tolerance (FT), we are promoting a proactive one where processes automatically migrate from ?unhealthy? nodes to healthy ones. Our approach relies on operating system virtualization techniques exemplied by but not limited to Xen. This paper contributes an automatic and transparent mechanism for proactive FT for arbitrary MPI applications. It leverages virtualization techniques combined with health monitoring and load-based migration. We exploit Xen's live migration mechanism for a guest operating system (OS) to migrate an MPI task from a health-deteriorating node to a healthy one without stopping the MPI task during most of the migration. Our proactive FT daemon orchestrates the tasks of health monitoring, load determination and initiation of guest OS migration. Experimental results demonstrate that live migration hides migration costs and limits the overhead to only a few seconds making it an attractive approach to realize FT in HPC systems. Overall, our enhancements make proactive FT a valuable asset for long-running MPI application that is complementary to reactive FT using full checkpoint/ restart schemes since checkpoint frequencies can be reduced as fewer unanticipated failures are encountered. In the context of OS virtualization, we believe that this is the rst comprehensive study of proactive fault tolerance where live migration is actually triggered by health monitoring.

Nagarajan, Arun Babu [North Carolina State University; Mueller, Frank [North Carolina State University; Engelmann, Christian [ORNL; Scott, Stephen L [ORNL

2007-01-01T23:59:59.000Z

180

Achieving fault tolerance via robust partitioning and N-Modular Redundancy  

E-Print Network [OSTI]

This thesis describes the design and performance results for the P-NMR fault tolerant avionics system architecture being developed at Draper Laboratory. The two key principles of the architecture are robust software ...

O'Connell, Brendan Anthony

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

E-Print Network 3.0 - active fault diagnosis Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for: active fault diagnosis Page: << < 1 2 3 4 5 > >> 1 932 IEEE TRANSACTIONS ON COMPUTER-AIDED DESIGN OF INTEGRATED CIRCUITS AND SYSTEMS, VOL. 26, NO. 5, MAY 2007...

182

Fault detection methods for vapor-compression air conditioners using electrical measurements  

E-Print Network [OSTI]

(cont.) This method was experimentally tested and validated on a commercially available air handler and duct system. In the second class of faults studied, liquid refrigerant, rather than vapor, enters the cylinder of a ...

Laughman, Christopher Reed.

2008-01-01T23:59:59.000Z

183

Extending Performance and Evaluating Risks of PV Systems Failure Using a Fault Tree and Event Tree Approach: Analysis of the Possible Application  

SciTech Connect (OSTI)

Performance and reliability of photovoltaic (PV) systems are important issues in the overall evaluation of a PV plant and its components. While performance is connected to the amount of energy produced by the PV installation in the working environmental conditions, reliability impacts the availability of the system to produce the expected amount of energy. In both cases, the evaluation should be done considering information and data coming from indoor as well as outdoor tests. In this paper a way of re-thinking performance, giving it a probabilistic connotation, and connecting the two concepts of performance and reliability is proposed. The paper follows a theoretical approach and discusses the way to obtaining such information, facing benefits and problems. The proposed probabilistic performance accounts for the probability of the system to function correctly, thus passing through the complementary evaluation of the probability of system malfunctions and consequences. Scenarios have to be identified where the system is not functioning properly or at all. They are expected to be combined in a probabilistic safety analysis (PSA) based approach, providing not only the required probability, but also being capable of giving a prioritization of the risks and the most dominant scenario associated to a specific situation. This approach can offer the possibility to highlight the most critical parts of a PV system, as well as providing support in design activities identifying weak connections.

Colli A.

2012-06-03T23:59:59.000Z

184

Structural relations along the western end of the Arrowhead Fault, Muddy Mountains, Nevada  

E-Print Network [OSTI]

, resembling "drag" effects related to horizontal movement on the Arrowhead fault, are interpreted as the re- sult of a drape-folded fold. The Summit thrust, a local northwesterly trending fault at the eastern end of the study area, is interpreted... Bonanza King Formation Dunderb erg Shale Buffington Formation Ordovician System Monocline Valley Formation Devonian System Muddy Peak Limestone Mississippian Series Rogers Spring Limestone vii xiii 12 12 12 12 13 1) 23 25 25 26 26 26...

Temple, Vernon James Jay

1977-01-01T23:59:59.000Z

185

Donaldson Active Regeneration PM System  

Broader source: Energy.gov (indexed) [DOE]

Modeling - FEA * Failure Mode Analysis & Life Prediction - Reliability Analysis * FMEA, Fault Tree Analysis, Risk Assessment, etc. Active System Durability & Reliability...

186

Control of a wind park with doubly fed induction generators in support of power system stability in case of grid faults  

E-Print Network [OSTI]

and is already applied in large wind parks as e.g. the Danish offshore wind park Horns Rev. The attractivenessControl of a wind park with doubly fed induction generators in support of power system stability@re.tu-darmstadt.de Abstract The paper presents a control strategy for wind parks based on the doubly fed induction generator

187

The effects of lithology and initial fault angle in physical models of fault-propagation folds  

E-Print Network [OSTI]

Experimentally deformed physical rock models are used to examine the effects of changing mechanical stratigraphy and initial fault angle on the development of fault-propagation folds over a flat-ramp-flat thrust geometry. This study also...

McLain, Christopher Thomas

2001-01-01T23:59:59.000Z

188

A fault location approach for fuzzy fault section estimation on radial distribution feeders  

E-Print Network [OSTI]

measured at feeder substations and the fault distance algorithm was tested using data obtained by staging faults on a model of an overhead feeder using EMTP/ATP simulation. The results obtained from the tests were promising. A simple illustration...

Andoh, Kwame Sarpong

2000-01-01T23:59:59.000Z

189

Collateral damage: Evolution with displacement of fracture distribution and secondary fault strands in fault damage zones  

E-Print Network [OSTI]

8 m fault 14 m fault Lonewolf Wadi Araba Carboneras Caletasiltstone, conglomerate Wadi As Sir Limestone gneiss schistFaulkner et al. , 2003], and Wadi Araba [Du Bernard et al. ,

Savage, Heather M.; Brodsky, Emily E.

2011-01-01T23:59:59.000Z

190

Detachment Faulting & Geothermal Resources - Pearl Hot Spring...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Faulting & Geothermal Resources - Pearl Hot Spring, NV Conducting a 3D Converted Shear Wave Project to Reduce Exploration Risk at Wister, CA Crump Geyser: High Precision...

191

Research on Fault Analysis and Fault-Tolerant Control of EV/HEV Powertrain  

E-Print Network [OSTI]

presents research works in the topics of fault analysis and fault tolerant control of an electric vehicle mechanism (transition strategy) at sensor fault occurrence. Index Terms--Electric vehicle, induction motor-tolerant AC motor drives in industrial applications [9-10- 41]. II. ELECTRIC VEHICLE POWERTRAIN COMPONENTS

Brest, Université de

192

High slip rate for a low seismicity along the Palu-Koro active fault in central Sulawesi (Indonesia)  

E-Print Network [OSTI]

High slip rate for a low seismicity along the Palu-Koro active fault in central Sulawesi (Indonesia, Indonesia Introduction Sulawesi Island, eastern Indonesia, is at the triple junction of the Paci®c (through- ABSTRACT In eastern Indonesia, the Central Sulawesi fault system consists of complex left-lateral strike

Vigny, Christophe

193

Earthquake behavior and structure of oceanic transform faults  

E-Print Network [OSTI]

Oceanic transform faults that accommodate strain at mid-ocean ridge offsets represent a unique environment for studying fault mechanics. Here, I use seismic observations and models to explore how fault structure affects ...

Roland, Emily Carlson

2012-01-01T23:59:59.000Z

194

Fault detection in an air-handling unit using residual and recursive parameter identification methods  

SciTech Connect (OSTI)

A scheme for detecting faults in an air-handling unit using residual and parameter identification methods is presented. Faults can be detected by comparing the normal or expected operating condition data with the abnormal, measured data using residuals. Faults can also be detected by examining unmeasurable parameter changes in a model of a controlled system using a system parameter identification technique. In this study, autoregressive moving average with exogenous input (ARMAX) and autoregressive with exogenous input (ARX) models with both single-input/single-output (SISO) and multi-input/single-output (MISO) structures are examined. Model parameters are determined using the Kalman filter recursive identification method. This approach is tested using experimental data from a laboratory`s variable-air-volume (VAV) air-handling unit operated with and without faults.

Lee, W.Y. [Korea Inst. of Energy Research, Taejon (Korea, Republic of); Park, C.; Kelly, G.E. [National Inst. of Standards and Technology, Gaithersburg, MD (United States)

1996-11-01T23:59:59.000Z

195

Verification of inferred faults by resistivity analysis. Technical progress report, July 17-October 31, 1981  

SciTech Connect (OSTI)

The major purpose of this effort is to detect new faults which may indicate fracture systems with potential for gas production from the black shales. The method is to gather surface geophysical data, principally resistivity, to test Landsat lineaments as faults. A second purpose is to develop an economical method of confirming remotely sensed lineaments as faults or fractures which can be applied in this region and perhaps be extended to the eastern part of the United States. To attain the goal of this work, the planned approach was to use high-powered (3KW) resistivity measurements in a dipole-dipole configuration to penetrate deeply - a rather expensive procedure. Toward this end it was decided to make a preliminary investigation using a scintillation counter in addition to a low-current resistivity measuring instrument. The scintillation counter gave more definite indication of known faults than did the resistivity measurements. The South Graham, North Graham, and the fault at Highways 403-269, Kentucky were all indicated on one traverse by scintillation measurements, but only the North Graham fault was indicated by resistivity, and the resistivities profile was not conclusive. The reason for the inconclusive resistivity result may have been the fact that the fault zones in this region are often thin, sometimes a matter of a few inches.

Jackson, P.L.

1981-01-01T23:59:59.000Z

196

Research on Fault Detection and Diagnosis of Scrolling Chiller with ANN  

E-Print Network [OSTI]

ICEBO2006, Shenzhen, China Co ntrol Systems for Energy Efficiency and Comfort, Vol. V-5-3 Research on Fault Detection and Diagnosis of Scrolling Chiller with ANN1 Yuli ZHOU Jie ZHENG Zhiju LIU Chaojie YANG Peng PENG... Chiller of Screw Fault Diagnose Artificial Neural Network 1 INTRODUCTION Artificial neural network based on the knowledge of neural network of human brain is to artificially form neural networks to implement some functions. It has powerful...

Zhou, Y.; Zheng, J.; Liu, Z.; Yang, C.; Peng, P.

2006-01-01T23:59:59.000Z

197

active fault segments: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Fault activation Kuzmanov, Georgi 140 Early stage evolution of growth faults: 3D seismic insights from the Levant Basin, Eastern Mediterranean Materials Science Websites...

198

Sensor Fault Diagnosis Using Principal Component Analysis  

E-Print Network [OSTI]

The purpose of this research is to address the problem of fault diagnosis of sensors which measure a set of direct redundant variables. This study proposes: 1. A method for linear senor fault diagnosis 2. An analysis of isolability and detectability...

Sharifi, Mahmoudreza

2010-07-14T23:59:59.000Z

199

Growth faults and salt tectonics in Houston diapir province: relative timing and exploration significance  

SciTech Connect (OSTI)

Oil and gas accumulation in Gulf Coast Tertiary strata is contolled mainly by regional growth faults and by salt-related structures. Salt forms the most prominent set of structures in the Houston diapir province of southeast Texas. Recent work in three study areas shows that the Tertiary growth-fault trends, so well displayed along strike to the south-west, continue through this salt basin as well, but they have been deformed by later salt movement. In the Katy area, seismic data disclose early (pre-Wilcox) salt pillows downdip of the Cretaceous reef trend. Salt stocks were injected upward from the pillows during Clayborne deposition, and were flanked by deep withdrawal basins and turtle structures. In Brazoria County, a major lower Frio growth-fault trend affecting the Houston delta system, was deformed by later salt domes, by a salt-withdrawal basin, and by a possible turtle structure at Chocolate Bayou. A productive geopressured aquifer exists in the salt-withdrawal basin bounded by the previously formed growth faults. In Jefferson County, in contrast, salt-tectonic activity and growth faulting appear to have been coeval. Early salt-cored ridges continued to rise throughout Frio deposition; growth faults occur both updip and downdip. Hydrocarbons accumulated over the salt domes in growth-fault anticlines and in stratigraphic traps. Recognition that shelf-margin growth faulting preceded the development of the present pattern of domes and basins has important implications for hydrocarbon exploration. Growth faults may be migration paths for hydrocarbons; furthermore, early formed traps, distorted by salt movement, may still be found to contain hydrocarbons.

Ewing, T.E.

1983-09-01T23:59:59.000Z

200

Self-triggering superconducting fault current limiter  

DOE Patents [OSTI]

A modular and scaleable Matrix Fault Current Limiter (MFCL) that functions as a "variable impedance" device in an electric power network, using components made of superconducting and non-superconducting electrically conductive materials. The matrix fault current limiter comprises a fault current limiter module that includes a superconductor which is electrically coupled in parallel with a trigger coil, wherein the trigger coil is magnetically coupled to the superconductor. The current surge doing a fault within the electrical power network will cause the superconductor to transition to its resistive state and also generate a uniform magnetic field in the trigger coil and simultaneously limit the voltage developed across the superconductor. This results in fast and uniform quenching of the superconductors, significantly reduces the burnout risk associated with non-uniformity often existing within the volume of superconductor materials. The fault current limiter modules may be electrically coupled together to form various "n" (rows).times."m" (columns) matrix configurations.

Yuan, Xing (Albany, NY); Tekletsadik, Kasegn (Rexford, NY)

2008-10-21T23:59:59.000Z

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Steps toward fault-tolerant quantum chemistry.  

SciTech Connect (OSTI)

Developing quantum chemistry programs on the coming generation of exascale computers will be a difficult task. The programs will need to be fault-tolerant and minimize the use of global operations. This work explores the use a task-based model that uses a data-centric approach to allocate work to different processes as it applies to quantum chemistry. After introducing the key problems that appear when trying to parallelize a complicated quantum chemistry method such as coupled-cluster theory, we discuss the implications of that model as it pertains to the computational kernel of a coupled-cluster program - matrix multiplication. Also, we discuss the extensions that would required to build a full coupled-cluster program using the task-based model. Current programming models for high-performance computing are fault-intolerant and use global operations. Those properties are unsustainable as computers scale to millions of CPUs; instead one must recognize that these systems will be hierarchical in structure, prone to constant faults, and global operations will be infeasible. The FAST-OS HARE project is introducing a scale-free computing model to address these issues. This model is hierarchical and fault-tolerant by design, allows for the clean overlap of computation and communication, reducing the network load, does not require checkpointing, and avoids the complexity of many HPC runtimes. Development of an algorithm within this model requires a change in focus from imperative programming to a data-centric approach. Quantum chemistry (QC) algorithms, in particular electronic structure methods, are an ideal test bed for this computing model. These methods describe the distribution of electrons in a molecule, which determine the properties of the molecule. The computational cost of these methods is high, scaling quartically or higher in the size of the molecule, which is why QC applications are major users of HPC resources. The complexity of these algorithms means that MPI alone is insufficient to achieve parallel scaling; QC developers have been forced to use alternative approaches to achieve scalability and would be receptive to radical shifts in the programming paradigm. Initial work in adapting the simplest QC method, Hartree-Fock, to this the new programming model indicates that the approach is beneficial for QC applications. However, the advantages to being able to scale to exascale computers are greatest for the computationally most expensive algorithms; within QC these are the high-accuracy coupled-cluster (CC) methods. Parallel coupledcluster programs are available, however they are based on the conventional MPI paradigm. Much of the effort is spent handling the complicated data dependencies between the various processors, especially as the size of the problem becomes large. The current paradigm will not survive the move to exascale computers. Here we discuss the initial steps toward designing and implementing a CC method within this model. First, we introduce the general concepts behind a CC method, focusing on the aspects that make these methods difficult to parallelize with conventional techniques. Then we outline what is the computational core of the CC method - a matrix multiply - within the task-based approach that the FAST-OS project is designed to take advantage of. Finally we outline the general setup to implement the simplest CC method in this model, linearized CC doubles (LinCC).

Taube, Andrew Garvin

2010-05-01T23:59:59.000Z

202

Statistical Fault Detection for Parallel Applications with AutomaDeD  

SciTech Connect (OSTI)

Today's largest systems have over 100,000 cores, with million-core systems expected over the next few years. The large component count means that these systems fail frequently and often in very complex ways, making them difficult to use and maintain. While prior work on fault detection and diagnosis has focused on faults that significantly reduce system functionality, the wide variety of failure modes in modern systems makes them likely to fail in complex ways that impair system performance but are difficult to detect and diagnose. This paper presents AutomaDeD, a statistical tool that models the timing behavior of each application task and tracks its behavior to identify any abnormalities. If any are observed, AutomaDeD can immediately detect them and report to the system administrator the task where the problem began. This identification of the fault's initial manifestation can provide administrators with valuable insight into the fault's root causes, making it significantly easier and cheaper for them to understand and repair it. Our experimental evaluation shows that AutomaDeD detects a wide range of faults immediately after they occur 80% of the time, with a low false-positive rate. Further, it identifies weaknesses of the current approach that motivate future research.

Bronevetsky, G; Laguna, I; Bagchi, S; de Supinski, B R; Ahn, D; Schulz, M

2010-03-23T23:59:59.000Z

203

Earthquake Recurrence in Simulated Fault Systems  

E-Print Network [OSTI]

pubs.usgs.gov/of/2007/143. Z HENG , G. and R ICE , J. R. (B EROZA and M IKUMO , 1996; Z HENG and R ICE , 1998). In our

Dieterich, James H.; Richards-Dinger, Keith B.

2010-01-01T23:59:59.000Z

204

Underground distribution cable incipient fault diagnosis system  

E-Print Network [OSTI]

INTRODUCTION 1.1 PREFACE The power industry has been developing into a challenging and competitive environment due to the ongoing restructuring and deregulation. This structural change has required the electric utilities to reduce operating costs...

Jaafari Mousavi, Mir Rasoul

2007-04-25T23:59:59.000Z

205

A Hybrid Rule-Based/Case-Based Reasoning Approach for Service Fault Diagnosis  

E-Print Network [OSTI]

affecting the service quality and a reasonable balance between the fault management effort and the costs of network and systems management. Our hybrid architecture consists of a rule-based reasoning module, whose in opposition to network and systems management. While the events that are encountered in network and systems

206

Mechanical Models of Fault-Related Folding  

SciTech Connect (OSTI)

The subject of the proposed research is fault-related folding and ground deformation. The results are relevant to oil-producing structures throughout the world, to understanding of damage that has been observed along and near earthquake ruptures, and to earthquake-producing structures in California and other tectonically-active areas. The objectives of the proposed research were to provide both a unified, mechanical infrastructure for studies of fault-related foldings and to present the results in computer programs that have graphical users interfaces (GUIs) so that structural geologists and geophysicists can model a wide variety of fault-related folds (FaRFs).

Johnson, A. M.

2003-01-09T23:59:59.000Z

207

Development of Hydrologic Characterization Technology of Fault Zones  

E-Print Network [OSTI]

rock interaction, fracture interconnectivity, fault-rockvalues, given the interconnectivity of fractures that are

Karasaki, Kenzi

2009-01-01T23:59:59.000Z

208

100 Area electrical distribution fault and coordination report  

SciTech Connect (OSTI)

This report documents three-phase and line-to-ground fault values and time overcurrent coordination curves for the electrical utility distribution system located in the 100 Areas. Activities that may improve the coordination of the distribution system have also been identified. An evaluation of system coordination was performed. The results of this evaluation are listed in Appendix B. There are protective devices within the 100 Area distribution system that do not coordinate with one another throughout the Areas. There is also a mis-application of reclosing relays at the 100B Area. The impact of the mis-coordination and incorrect application of reclosing relays is that system selectivity is reduced. Equipment will still be protected against damaging currents, however more equipment will be de-energized than necessary during fault conditions. It is the opinion of the author of this report that the cases of mis-coordination listed above, and in Appendix B, do not significantly degrade the system protection system nor the reliability of the 100 Area distribution system. Therefore, immediate response to correct these problems is not recommended. However, a planned methodology, outlined in an Activity Plan, to correct these problems should be developed and implemented in the near future.

Webber, J.J. [ICF Kaiser Hanford Co., Richland, WA (United States)

1994-09-23T23:59:59.000Z

209

Quality monitored distributed voting system  

DOE Patents [OSTI]

A quality monitoring system can detect certain system faults and fraud attempts in a distributed voting system. The system uses decoy voters to cast predetermined check ballots. Absent check ballots can indicate system faults. Altered check ballots can indicate attempts at counterfeiting votes. The system can also cast check ballots at predetermined times to provide another check on the distributed voting system. 6 figs.

Skogmo, D.

1997-03-18T23:59:59.000Z

210

Fault Tolerant Control using Cartesian Genetic Programming  

E-Print Network [OSTI]

Fault Tolerant Control using Cartesian Genetic Programming Yoshikazu Hirayama University of York]: Robotics-- Sensors; F.2.2 [Analysis of Algorithms and Problem Complexity]: Nonnumerical Algorithms and Problems General Terms Algorithms, Reliability Keywords cartesian genetic programming, evolutionary

Fernandez, Thomas

211

Microscopic feather fractures in the faulting process  

E-Print Network [OSTI]

assumptions. Although the problem was not solved in this study, the expected ol trajectories for such a solution are shown in Figure 5 (page 20). Both of these concepts indicate a tendency for the local ol to make an angle with the fault greater than 6..., maximum compressive stress, trajectories to a two dimensional during sliding along (dashed lines) in a cylindrical specimen reduced elastic problem. (b) Expected ol trajectories a fault. crack by shear along the crack surfaces (Bieniawski, 1967...

Conrad, Robert Eugene

1974-01-01T23:59:59.000Z

212

Fault-tolerant quantum computing with color codes  

E-Print Network [OSTI]

We present and analyze protocols for fault-tolerant quantum computing using color codes. We present circuit-level schemes for extracting the error syndrome of these codes fault-tolerantly. We further present an integer-program-based decoding algorithm for identifying the most likely error given the syndrome. We simulated our syndrome extraction and decoding algorithms against three physically-motivated noise models using Monte Carlo methods, and used the simulations to estimate the corresponding accuracy thresholds for fault-tolerant quantum error correction. We also used a self-avoiding walk analysis to lower-bound the accuracy threshold for two of these noise models. We present and analyze two architectures for fault-tolerantly computing with these codes: one with 2D arrays of qubits are stacked atop each other and one in a single 2D substrate. Our analysis demonstrates that color codes perform slightly better than Kitaev's surface codes when circuit details are ignored. When these details are considered, we estimate that color codes achieve a threshold of 0.082(3)%, which is higher than the threshold of $1.3 \\times 10^{-5}$ achieved by concatenated coding schemes restricted to nearest-neighbor gates in two dimensions but lower than the threshold of 0.75% to 1.1% reported for the Kitaev codes subject to the same restrictions. Finally, because the behavior of our decoder's performance for two of the noise models we consider maps onto an order-disorder phase transition in the three-body random-bond Ising model in 2D and the corresponding random-plaquette gauge model in 3D, our results also answer the Nishimori conjecture for these models in the negative: the statistical-mechanical classical spin systems associated to the 4.8.8 color codes are counterintuitively more ordered at positive temperature than at zero temperature.

Andrew J. Landahl; Jonas T. Anderson; Patrick R. Rice

2011-08-29T23:59:59.000Z

213

Preliminary photovoltaic arc-fault prognostic tests using sacrificial fiber optic cabling.  

SciTech Connect (OSTI)

Through the New Mexico Small Business Assistance Program, Sandia National Laboratories worked with Sentient Business Systems, Inc. to develop and test a novel photovoltaic (PV) arc-fault detection system. The system operates by pairing translucent polymeric fiber optic sensors with electrical circuitry so that any external abrasion to the system or internal heating causes the fiber optic connection to fail or detectably degrade. A periodic pulse of light is sent through the optical path using a transmitter-receiver pair. If the receiver does not detect the pulse, an alarm is sounded and the PV system can be de-energized. This technology has the unique ability to prognostically determine impending failures to the electrical system in two ways: (a) the optical connection is severed prior to physical abrasion or cutting of PV DC electrical conductors, and (b) the polymeric fiber optic cable melts via Joule heating before an arc-fault is established through corrosion. Three arc-faults were created in different configurations found in PV systems with the integrated fiber optic system to determine the feasibility of the technology. In each case, the fiber optic cable was broken and the system annunciated the fault.

Johnson, Jay; Blemel, Kenneth D. [Sentient Business Systems, Inc., Albuquerque, NM; Peter, Francis [Sentient Business Systems, Inc., Albuquerque, NM

2013-02-01T23:59:59.000Z

214

E-Print Network 3.0 - andreas fault zone Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Chester Summary: accommodated along large plate-boundary faults like the San Andreas transform fault in California. These faults... depend in part on the structure of the tabular...

215

E-Print Network 3.0 - active fault zone Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Earth Structure (2nd Edition), 2004 Summary: 292010 Oceanic Transform Faults and Fracture Zones Transform Fault: Active displacement. Fracture Zone: Fossil... fault, no active...

216

Development of a Hydrologic Characterization Technology for Fault Zones Final Report  

E-Print Network [OSTI]

Hydrologic Characterization Technology of Fault Zones, Phaseof Characterization Technology for Fault Zones, LBNL-1635E,Characterization on Technology of Fault Zones – Phase II

Karasaki, Kenzi

2014-01-01T23:59:59.000Z

217

Challenges to Overcurrent Protection Devices under Line-line Faults in Solar Photovoltaic Arrays  

E-Print Network [OSTI]

Challenges to Overcurrent Protection Devices under Line-line Faults in Solar Photovoltaic Arrays Ye-MA, LLC Newburyport, MA, US Abstract--Solar photovoltaic (PV) arrays behave distinctively from remain undetected, which could lead to reduced system efficiency, reduced system reliability, and even

Lehman, Brad

218

Measuring and Modeling Fault Density for Plume-Fault Encounter Probability Estimation  

SciTech Connect (OSTI)

Emission of carbon dioxide from fossil-fueled power generation stations contributes to global climate change. Storage of this carbon dioxide within the pores of geologic strata (geologic carbon storage) is one approach to mitigating the climate change that would otherwise occur. The large storage volume needed for this mitigation requires injection into brine-filled pore space in reservoir strata overlain by cap rocks. One of the main concerns of storage in such rocks is leakage via faults. In the early stages of site selection, site-specific fault coverages are often not available. This necessitates a method for using available fault data to develop an estimate of the likelihood of injected carbon dioxide encountering and migrating up a fault, primarily due to buoyancy. Fault population statistics provide one of the main inputs to calculate the encounter probability. Previous fault population statistics work is shown to be applicable to areal fault density statistics. This result is applied to a case study in the southern portion of the San Joaquin Basin with the result that the probability of a carbon dioxide plume from a previously planned injection had a 3% chance of encountering a fully seal offsetting fault.

Jordan, P.D.; Oldenburg, C.M.; Nicot, J.-P.

2011-05-15T23:59:59.000Z

219

VCSEL fault location apparatus and method  

DOE Patents [OSTI]

An apparatus for locating a fault within an optical fiber is disclosed. The apparatus, which can be formed as a part of a fiber-optic transmitter or as a stand-alone instrument, utilizes a vertical-cavity surface-emitting laser (VCSEL) to generate a test pulse of light which is coupled into an optical fiber under test. The VCSEL is subsequently reconfigured by changing a bias voltage thereto and is used as a resonant-cavity photodetector (RCPD) to detect a portion of the test light pulse which is reflected or scattered from any fault within the optical fiber. A time interval .DELTA.t between an instant in time when the test light pulse is generated and the time the reflected or scattered portion is detected can then be used to determine the location of the fault within the optical fiber.

Keeler, Gordon A. (Albuquerque, NM); Serkland, Darwin K. (Albuquerque, NM)

2007-05-15T23:59:59.000Z

220

Synthesis and evaluation of fault-tolerant quantum computer architectures  

E-Print Network [OSTI]

Fault-tolerance is the cornerstone of practical, large-scale quantum computing, pushed into its prominent position with heroic theoretical efforts. The fault-tolerance threshold, which is the component failure probability ...

Cross, Andrew W. (Andrew William), 1979-

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Observations on the capability of the Criner fault, southern Oklahoma  

E-Print Network [OSTI]

Results of previous investigations have indicated the possibility that recent deformation has occurred on the Criner fault of southern Oklahoma. The Criner fault is located in Carter and Love Counties, Oklahoma, approximately 100 kilometers...

Williamson, Shawn Collin

2012-06-07T23:59:59.000Z

222

Scalable, Fault-tolerant Management in a Service Oriented Architecture  

E-Print Network [OSTI]

Scalable, Fault-tolerant Management in a Service Oriented Architecture Harshawardhan Gadgil: Scalable, Fault-tolerance, Service Oriented Management, Architecture 1. Introduction With the explosion. The service-oriented architecture provides a simple and flexible framework for building sophisticated

223

FEATURE BASED HANDLING OF SURFACE FAULTS IN COMPACT DISC PLAYERS  

E-Print Network [OSTI]

two photo detectors. The distances are the distance from the actual position of the OPU such surface faults. The core idea is not to rely on sensor information during the fault. The sensor signals

Wickerhauser, M. Victor

224

New approach to the fault location problem using synchronized sampling  

E-Print Network [OSTI]

This thesis presents a new approach to solving the problem of fault location on a transmission line using synchronized data from both ends of the line. The synchronized phase voltage and current samples taken during the fault transient are used...

Mrkic, Jasna

2012-06-07T23:59:59.000Z

225

Frictional properties of faults: from observation on the  

E-Print Network [OSTI]

Frictional properties of faults: from observation on the Longitudinal Valley Fault, Taiwan myself lucky to do what I love and to wake up every day, happy and excited about the day to come

Winfree, Erik

226

Development of a bridge fault extractor tool  

E-Print Network [OSTI]

are tools that analyze chip layouts and produce a realistic list of bridging faults within that chip. FedEx, previously developed at Texas A&M University, extracts all two-node intralayer bridges of any given chip layout and optionally extracts all two...) for this tool which aids in more effectively visualizing the bridge faults across the chip. The final aim of this thesis was to perform FedEx output analysis to understand the nature of the defects, such as variation of critical area (the area where...

Bhat, Nandan D.

2005-02-17T23:59:59.000Z

227

Understanding Fault Characteristics of Inverter-Based Distributed Energy Resources  

SciTech Connect (OSTI)

This report discusses issues and provides solutions for dealing with fault current contributions from inverter-based distributed energy resources.

Keller, J.; Kroposki, B.

2010-01-01T23:59:59.000Z

228

Symmetrical and Unsymmetrical Fault Currents of a Wind Power Plant: Preprint  

SciTech Connect (OSTI)

This paper investigates the short-circuit behavior of a wind power plant for different types of wind turbines. Both symmetrical faults and unsymmetrical faults are investigated. The size of wind power plants (WPPs) keeps getting bigger and bigger. The number of wind plants in the U.S. has increased very rapidly in the past 10 years. It is projected that in the U.S., the total wind power generation will reach 330 GW by 2030. As the importance of WPPs increases, planning engi-neers must perform impact studies used to evaluate short-circuit current (SCC) contribution of the plant into the transmission network under different fault conditions. This information is needed to size the circuit breakers, to establish the proper sys-tem protection, and to choose the transient suppressor in the circuits within the WPP. This task can be challenging to protec-tion engineers due to the topology differences between different types of wind turbine generators (WTGs) and the conventional generating units. This paper investigates the short-circuit behavior of a WPP for different types of wind turbines. Both symmetrical faults and unsymmetrical faults are investigated. Three different soft-ware packages are utilized to develop this paper. Time domain simulations and steady-state calculations are used to perform the analysis.

Gevorgian, V.; Singh, M.; Muljadi, E.

2011-12-01T23:59:59.000Z

229

Statistical estimation of multiple faults in aircraft gas turbine engines  

E-Print Network [OSTI]

415 Statistical estimation of multiple faults in aircraft gas turbine engines S Sarkar, C Rao of multiple faults in aircraft gas-turbine engines, based on a statistical pattern recognition tool called commercial aircraft engine. Keywords: aircraft propulsion, gas turbine engines, multiple fault estimation

Ray, Asok

230

A Parametric Spectral Estimator for Faults Detection in Induction Machines  

E-Print Network [OSTI]

for fault diagnosis in electrical machines. Current spectral estimation is usually performed using classical and productivity of electrical drives. For electrical motors and generators, fault detection is usually performedA Parametric Spectral Estimator for Faults Detection in Induction Machines El Houssin El Bouchikhi

Boyer, Edmond

231

UNSUPERVISED CLUSTERING FOR FAULT DIAGNOSIS IN NUCLEAR POWER PLANT COMPONENTS  

E-Print Network [OSTI]

1 UNSUPERVISED CLUSTERING FOR FAULT DIAGNOSIS IN NUCLEAR POWER PLANT COMPONENTS Piero Baraldi1 of prototypical behaviors. Its performance is tested with respect to an artificial case study and then applied on transients originated by different faults in the pressurizer of a nuclear power reactor. Key Words: Fault

Boyer, Edmond

232

A Fusing Switch for Fault Suppression in the SNS High Voltage Converter Modulators  

SciTech Connect (OSTI)

The High Voltage Converter Modulators (HVCMs) at the Spallation Neutron Source (SNS) have operated in excess of a combined 250,000 hours. Performance and reliability improvements to the HVCM are ongoing to increase modulator availability as accelerator system demands increase. There is a relatively large amount of energy storage in the HVCMs, {approx}180 kJ. This energy has the potential to dump into unsuppressed faults, cause damage, and increase the time to repair. The 'fusing switch' concept involves isolation of this stored energy from the location of the most common faults. This paper introduces this concept and its application to the HVCMs.

Kemp, Mark A.; Burkhart, Craig; Nguyen, Minh N.; /SLAC; Anderson, David E.; /Oak Ridge

2009-08-03T23:59:59.000Z

233

Temporal data mining for root-cause analysis of machine faults in automotive assembly lines  

E-Print Network [OSTI]

Engine assembly is a complex and heavily automated distributed-control process, with large amounts of faults data logged everyday. We describe an application of temporal data mining for analyzing fault logs in an engine assembly plant. Frequent episode discovery framework is a model-free method that can be used to deduce (temporal) correlations among events from the logs in an efficient manner. In addition to being theoretically elegant and computationally efficient, frequent episodes are also easy to interpret in the form actionable recommendations. Incorporation of domain-specific information is critical to successful application of the method for analyzing fault logs in the manufacturing domain. We show how domain-specific knowledge can be incorporated using heuristic rules that act as pre-filters and post-filters to frequent episode discovery. The system described here is currently being used in one of the engine assembly plants of General Motors and is planned for adaptation in other plants. To the best ...

Laxman, Srivatsan; Unnikrishnan, K P; Sastry, P S

2009-01-01T23:59:59.000Z

234

Structure of the eastern Red Rocks and Wind Ridge thrust faults, Wyoming: how a thrust fault gains displacement along strike  

E-Print Network [OSTI]

STRUCTURE OF THE EASTERN RED ROCKS AND WIND RIDGE THRUST FAULTS, WYOMING: HOW A THRUST FAULT GAINS DISPLACEMENT ALONG STRIKE A Thesis by BRENT STANLEY HUNTSMAN Submitted to the Graduate College of Texas A&M University in partial fulfillment... of the requirements for the degree of MASTER OF SCIENCE December 1983 Major Subject: Geology STRUCTURE OF THE EASTERN RED ROCKS AND WIND RIDGE THRUST FAULTS, WYOMING: HOW A THRUST FAULT GAINS DISPLACEMENT ALONG STRIKE A Thesis by BRENT STANLEY HUNTSMAN...

Huntsman, Brent Stanley

1983-01-01T23:59:59.000Z

235

Chasing the FLP Impossibility Result in a LAN How Robust Can a Fault Tolerant Server Be?  

E-Print Network [OSTI]

parameter is the time- out used by our heartbeat failure detectors. The frequency of heartbeats is keptChasing the FLP Impossibility Result in a LAN or How Robust Can a Fault Tolerant Server Be? P proven an impossibility result about consensus in the asyn- chronous system model, and similar

Défago, Xavier

236

Mapping of grid faults and grid codes Florin Iov, Anca Daniela Hansen, Poul Srensen,  

E-Print Network [OSTI]

to clarify and define possible new directions in the certification process of power plant wind turbines, namely wind turbines, which participate actively in the stabilisation of power systems. Practical-Ontario 27 3.8.4 Conclusions 28 3.9 Summary 28 4 Fault analysis 30 4.1 Simulation Model 30 4.2 Study cases 32

237

Reaction localization and softening of texturally hardened mylonites in a reactivated fault zone, central Argentina  

E-Print Network [OSTI]

, central Argentina S. J. WHITMEYER1 * AND R. P. WINTSCH2 1 Department of Earth Sciences, Boston University, central Argentina, experienced multiple ductile deformation and faulting events that involved a variety of replacement reactions in a partially open system. Key words: Argentina; reaction localization; reactivation

Whitmeyer, Steven J.

238

Structural analysis of the Velarden~ a mining district, Mexico: a faulted AuAg-rich  

E-Print Network [OSTI]

Structural analysis of the Velarden~ a mining district, Mexico: a faulted Au­Ag-rich hydrothermal carbonate-hosted deposits are found at the contact with surrounding limestones. The mineral- ized structures at different crustal depths, thus enabling studies of the entire hydrothermal system--from low-grade breccia

Long, Bernard

239

A Fault-Tolerant Multiphase Permanent Magnet Generator for Marine Current Turbine Applications  

E-Print Network [OSTI]

A Fault-Tolerant Multiphase Permanent Magnet Generator for Marine Current Turbine Applications on offshore wind turbine systems. Marine current turbines are characterized by a very difficult access feature. This paper deals with the use of a PM multiphase marine current turbine generator. With this kind

Boyer, Edmond

240

Towards a Framework for IT Service Fault Management Andreas Hanemann*, Martin Sailer  

E-Print Network [OSTI]

with the service quality in this sense differ from problems in the area of network and systems management. To improve the overall service quality the management of IT service quality degradations is a critical issueTowards a Framework for IT Service Fault Management Andreas Hanemann*, Martin Sailer , and David

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Mechanical fault detection in induction motor drives through stator current monitoring -Theory  

E-Print Network [OSTI]

vibrations lead to acoustic noise, noise monitoring is also a possible approach. However, these methods0 Mechanical fault detection in induction motor drives through stator current monitoring - Theory machines are a key element in many electrical systems. Amongst all types of electric motors, induction

Paris-Sud XI, Université de

242

Synchronous Machine Faults Detection and Diagnosis for Electro-mechanical Actuators  

E-Print Network [OSTI]

Detection and Isolation system for permanent magnet synchronous machine (PMSM). Two main faults occurring for the machine control. To illustrate the method an application is made on an innovative 12-slots 10-poles PMSM that becomes more and more popular in aeronautics, and on a 9-slots 8-poles PMSM used in critical application

Boyer, Edmond

243

Timed Fault Tree Models of the China Yongwen Railway Accident , Zhaoguang Peng2,  

E-Print Network [OSTI]

analysis (FMEA), fault tree analysis (FTA) [3], functional hazard analysis, and event tree analysis (ETA that involves applying a set of descriptors to a number of parameters. FMEA is an effective analytical tool used to examine possible failure modes and to eliminate potential failure during system designs [5]. FMEA

Miller, Alice

244

Combining Functional Modelling and Qualitative Fault Propagation to Enable Failure Mode Analysis of  

E-Print Network [OSTI]

of Software Systems Neal Snooke and Jonathan Bell 1 Abstract. Failure Modes and Effects Analysis (FMEA- ware, and qualitative fault propagation, enables automated Software FMEA (SFMEA). The result is a broad in extending FMEA into the soft- ware itself [3, 14, 6, 8] however there has been little progress in developing

Snooke, Neal

245

Fault-tolerant Holonomic Quantum Computation in Surface Codes  

E-Print Network [OSTI]

We show that universal holonomic quantum computation (HQC) can be achieved fault-tolerantly by adiabatically deforming the gapped stabilizer Hamiltonian of the surface code, where quantum information is encoded in the degenerate ground space of the system Hamiltonian. We explicitly propose procedures to perform each logical operation, including logical state initialization, logical state measurement, logical CNOT, state injection and distillation,etc. In particular, adiabatic braiding of different types of holes on the surface leads to a topologically protected, non-Abelian geometric logical CNOT. Throughout the computation, quantum information is protected from both small perturbations and low weight thermal excitations by a constant energy gap, and is independent of the system size. Also the Hamiltonian terms have weight at most four during the whole process. The effect of thermal error propagation is considered during the adiabatic code deformation. With the help of active error correction, this scheme is fault-tolerant, in the sense that the computation time can be arbitrarily long for large enough lattice size. It is shown that the frequency of error correction and the physical resources needed can be greatly reduced by the constant energy gap.

Yi-Cong Zheng; Todd A. Brun

2015-02-04T23:59:59.000Z

246

Fault Tolerant CORBASpecification, OMG document: ptc/20000404  

E-Print Network [OSTI]

Fault Tolerant CORBASpecification, V1.0 OMG document: ptc/2000­04­04 replaces draft adopted specification ptc/2000­03­04 and submission document orbos/00­01­19 This document is an OMG Final Adopted in the finalization phase. Comments on the content of this document are welcomed, and should be directed to issues

Roma "La Sapienza", Università di

247

Global Trajectory Planning for Fault Tolerant Manipulators  

E-Print Network [OSTI]

. Khosla Department of Electrical and Computer Engineering and The Robotics Institute, Carnegie Mellon attribute of robot manipulators in a growing range of applications such as space missions, nuclear waste retrieval, and medical robot­ ics. This trend has spawned a research effort in fault toler­ ant robotics

248

FPGA Interconnect Delay Fault Testing Erik Chmelar  

E-Print Network [OSTI]

A satisfactory FPGA testing method meets several crite- ria. First, the routing resources must be explicitlyFPGA Interconnect Delay Fault Testing Erik Chmelar Center for Reliable Computing Stanford is a scalable manufactur- ing test method for all SRAM-based FPGAs, able to detect multiple interconnect delay

Stanford University

249

Probabilistic model of fault detection in quantum circuits  

E-Print Network [OSTI]

It is shown that the fault testing for quantum circuits does not follow conventional classical techniques. If probabilistic gate like Hadamard gate is included in a circuit then the classical notion of test vector is shown to fail. We have reported several new and distinguishing features of quantum fault and also presented a general methodology for detection of functional faults in a quantum circuit. The technique can generate test vectors for detection of different kinds of fault. Specific examples are given and time complexity of the proposed quantum fault detection algorithm is reported.

Anindita Banerjee; Anirban Pathak

2009-05-12T23:59:59.000Z

250

Cooperative Fault Tolerant Distributed Computing  

SciTech Connect (OSTI)

HARNESS was proposed as a system that combined the best of emerging technologies found in current distributed computing research and commercial products into a very flexible, dynamically adaptable framework that could be used by applications to allow them to evolve and better handle their execution environment. The HARNESS system was designed using the considerable experience from previous projects such as PVM, MPI, IceT and Cumulvs. As such, the system was designed to avoid any of the common problems found with using these current systems, such as no single point of failure, ability to survive machine, node and software failures. Additional features included improved inter-component connectivity, with full support for dynamic down loading of addition components at run-time thus reducing the stress on application developers to build in all the libraries they need in advance.

Fagg, Graham E.

2006-03-15T23:59:59.000Z

251

A 4000-A HVDC (high-voltage direct-current) circuit breaker with fast fault-clearing capability: Final report  

SciTech Connect (OSTI)

This project is a follow-up of the first development of a 500 kV HVDC airblast circuit breaker (EPRI project 1507-3). The objective was to increase the current interrupting capability from 2200 A to 4000 A and shorten its fault clearing time. A high current 500 kV HVDC circuit breaker has been built using the passive commutation circuit. The breaker is modular in construction and can be designed for a wide variety of system conditions. More than 400 current interruptions were carried out successfully. Tests have shown that this circuit breaker is capable of interrupting more than 4000 A dc. Practical breakers with current interrupting capability of even 5500 A dc could be built. The circuit breaker operation and the fault-clearing process can be materially speeded up if the trip signal is given as soon as the fault is detected and without waiting for the current levels to come down in response to converter control action. The new dc breakers are shown to be capable of withstanding these transient arc currents of 8000 A without affecting its ability to interrupt the direct current that follows the transient. This transient current withstand capability is greater than is likely to occur during dc faults. The fault clearing time of this HVDC circuit breaker is comparable to the fault clearing time of conventional ac breakers for ac faults. The developed HVDC circuit breaker is now commercially available and can be supplied for use in HVDC systems. Its use in such systems is expected to provide flexibility in system design and contribute to system stability. 38 refs., 52 figs., 9 tabs.

Not Available

1988-04-01T23:59:59.000Z

252

2009 fault tolerance for extreme-scale computing workshop, Albuquerque, NM - March 19-20, 2009.  

SciTech Connect (OSTI)

This is a report on the third in a series of petascale workshops co-sponsored by Blue Waters and TeraGrid to address challenges and opportunities for making effective use of emerging extreme-scale computing. This workshop was held to discuss fault tolerance on large systems for running large, possibly long-running applications. The main point of the workshop was to have systems people, middleware people (including fault-tolerance experts), and applications people talk about the issues and figure out what needs to be done, mostly at the middleware and application levels, to run such applications on the emerging petascale systems, without having faults cause large numbers of application failures. The workshop found that there is considerable interest in fault tolerance, resilience, and reliability of high-performance computing (HPC) systems in general, at all levels of HPC. The only way to recover from faults is through the use of some redundancy, either in space or in time. Redundancy in time, in the form of writing checkpoints to disk and restarting at the most recent checkpoint after a fault that cause an application to crash/halt, is the most common tool used in applications today, but there are questions about how long this can continue to be a good solution as systems and memories grow faster than I/O bandwidth to disk. There is interest in both modifications to this, such as checkpoints to memory, partial checkpoints, and message logging, and alternative ideas, such as in-memory recovery using residues. We believe that systematic exploration of these ideas holds the most promise for the scientific applications community. Fault tolerance has been an issue of discussion in the HPC community for at least the past 10 years; but much like other issues, the community has managed to put off addressing it during this period. There is a growing recognition that as systems continue to grow to petascale and beyond, the field is approaching the point where we don't have any choice but to address this through R&D efforts.

Katz, D. S.; Daly, J.; DeBardeleben, N.; Elnozahy, M.; Kramer, B.; Lathrop, S.; Nystrom, N.; Milfeld, K.; Sanielevici, S.; Scott, S.; Votta, L.; Louisiana State Univ.; Center for Exceptional Computing; LANL; IBM; Univ. of Illinois; Shodor Foundation; Pittsburgh Supercomputer Center; Texas Advanced Computing Center; ORNL; Sun Microsystems

2009-02-01T23:59:59.000Z

253

Electrically heated particulate filter diagnostic systems and methods  

DOE Patents [OSTI]

A system that diagnoses regeneration of an electrically heated particulate filter is provided. The system generally includes a grid module that diagnoses a fault of the grid based on at least one of a current signal and a voltage signal. A diagnostic module at least one of sets a fault status and generates a warning signal based on the fault of the grid.

Gonze, Eugene V [Pinckney, MI

2009-09-29T23:59:59.000Z

254

Buffered coscheduling for parallel programming and enhanced fault tolerance  

DOE Patents [OSTI]

A computer implemented method schedules processor jobs on a network of parallel machine processors or distributed system processors. Control information communications generated by each process performed by each processor during a defined time interval is accumulated in buffers, where adjacent time intervals are separated by strobe intervals for a global exchange of control information. A global exchange of the control information communications at the end of each defined time interval is performed during an intervening strobe interval so that each processor is informed by all of the other processors of the number of incoming jobs to be received by each processor in a subsequent time interval. The buffered coscheduling method of this invention also enhances the fault tolerance of a network of parallel machine processors or distributed system processors

Petrini, Fabrizio (Los Alamos, NM); Feng, Wu-chun (Los Alamos, NM)

2006-01-31T23:59:59.000Z

255

Faulting in the Yucca Mountain region: Critical review and analyses of tectonic data from the central Basin and Range  

SciTech Connect (OSTI)

Yucca Mountain, Nevada, has been proposed as the potential site for a high-level waste (HLW) repository. The tectonic setting of Yucca Mountain presents several potential hazards for a proposed repository, such as potential for earthquake seismicity, fault disruption, basaltic volcanism, magma channeling along pre-existing faults, and faults and fractures that may serve as barriers or conduits for groundwater flow. Characterization of geologic structures and tectonic processes will be necessary to assess compliance with regulatory requirements for the proposed high level waste repository. In this report, we specifically investigate fault slip, seismicity, contemporary stain, and fault-slip potential in the Yucca Mountain region with regard to Key Technical Uncertainties outlined in the License Application Review Plan (Sections 3.2.1.5 through 3.2.1.9 and 3.2.2.8). These investigations center on (i) alternative methods of determining the slip history of the Bare Mountain Fault, (ii) cluster analysis of historic earthquakes, (iii) crustal strain determinations from Global Positioning System measurements, and (iv) three-dimensional slip-tendency analysis. The goal of this work is to assess uncertainties associated with neotectonic data sets critical to the Nuclear Regulatory Commission and the Center for Nuclear Waste Regulatory Analyses` ability to provide prelicensing guidance and perform license application review with respect to the proposed HLW repository at Yucca Mountain.

Ferrill, D.A.; Stirewalt, G.L.; Henderson, D.B.; Stamatakos, J.; Morris, A.P.; Spivey, K.H. [Southwest Research Inst., San Antonio, TX (United States). Center for Nuclear Waste Regulatory Analyses; Wernicke, B.P. [California Inst. of Tech., Pasadena, CA (United States). Div. of Geological and Planetary Sciences

1996-03-01T23:59:59.000Z

256

Fault Current Contribution from Single-Phase PV Inverters  

SciTech Connect (OSTI)

A significant increase in photovoltaic (PV) system installations is expected to come on line in the near future and as the penetration level of PV increases, the effect of PV may no longer be considered minimal. One of the most important attributions of additional PV is what effect this may have on protection systems. Protection engineers design protection systems to safely eliminate faults from the electric power system. One of the new technologies recently introduced into the electric power system are distributed energy resources (DER). Currently, inverter-based DER contributes very little to the power balance on all but a few utility distribution systems. As DER become prevalent in the distribution system, equipment rating capability and coordination of protection systems merit a closer investigation. A collaborative research effort between the National Renewable Energy Laboratory (NREL) and Southern California Edison (SCE) involved laboratory short-circuit testing single-phase (240 VAC) residential type (between 1.5 and 7kW) inverters. This paper will reveal test results obtained from these short-circuit tests.

Keller, J.; Kroposki, B.; Bravo, R.; Robles, S.

2011-01-01T23:59:59.000Z

257

Calculating the probability of injected carbon dioxide plumes encountering faults  

SciTech Connect (OSTI)

One of the main concerns of storage in saline aquifers is leakage via faults. In the early stages of site selection, site-specific fault coverages are often not available for these aquifers. This necessitates a method using available fault data to estimate the probability of injected carbon dioxide encountering and migrating up a fault. The probability of encounter can be calculated from areal fault density statistics from available data, and carbon dioxide plume dimensions from numerical simulation. Given a number of assumptions, the dimension of the plume perpendicular to a fault times the areal density of faults with offsets greater than some threshold of interest provides probability of the plume encountering such a fault. Application of this result to a previously planned large-scale pilot injection in the southern portion of the San Joaquin Basin yielded a 3% and 7% chance of the plume encountering a fully and half seal offsetting fault, respectively. Subsequently available data indicated a half seal-offsetting fault at a distance from the injection well that implied a 20% probability of encounter for a plume sufficiently large to reach it.

Jordan, P.D.

2011-04-01T23:59:59.000Z

258

Stuck-at-fault test set compaction  

E-Print Network [OSTI]

. Test set size under pattern score based dynamic compaction . . . 13 . . . 17 Figure 7. Pattern Score distribution v:ith pattern metric dynamic compaction. . . . . . . . . . . . . . I g LIST OF TABLES Page Table l. l. nuit Target Sclcction Methods.... Fault Target Selection Methods Random Minimum Detection Count Circuit Name c432 c499 c880 c1355 c1908 G2670 Excitation Balance 0. 136296 0. 191652 0. 170293 0. 173310 0. 187486 0. 190484 Pattern Count 1152 873 2693 1394 1708 5148...

Vanfickell, Jason Michael

2013-02-22T23:59:59.000Z

259

Detailed Geophysical Fault Characterization in Yucca Flat, Nevada Test Site, Nevada  

SciTech Connect (OSTI)

Yucca Flat is a topographic and structural basin in the northeastern part of the Nevada Test Site (NTS) in Nye County, Nevada. Between the years 1951 and 1992, 659 underground nuclear tests took place in Yucca Flat; most were conducted in large, vertical excavations that penetrated alluvium and the underlying Cenozoic volcanic rocks. Radioactive and other potential chemical contaminants at the NTS are the subject of a long-term program of investigation and remediation by the U.S. Department of Energy (DOE), National Nuclear Security Administration, Nevada Site Office, under its Environmental Restoration Program. As part of the program, the DOE seeks to assess the extent of contamination and to evaluate the potential risks to humans and the environment from byproducts of weapons testing. To accomplish this objective, the DOE Environmental Restoration Program is constructing and calibrating a ground-water flow model to predict hydrologic flow in Yucca Flat as part of an effort to quantify the subsurface hydrology of the Nevada Test Site. A necessary part of calibrating and evaluating a model of the flow system is an understanding of the location and characteristics of faults that may influence ground-water flow. In addition, knowledge of fault-zone architecture and physical properties is a fundamental component of the containment of the contamination from underground nuclear tests, should such testing ever resume at the Nevada Test Site. The goal of the present investigation is to develop a detailed understanding of the geometry and physical properties of fault zones in Yucca Flat. This study was designed to investigate faults in greater detail and to characterize fault geometry, the presence of fault splays, and the fault-zone width. Integrated geological and geophysical studies have been designed and implemented to work toward this goal. This report describes the geophysical surveys conducted near two drill holes in Yucca Flat, the data analyses performed, and the integrated interpretations developed from the suite of geophysical methodologies utilized in this investigation. Data collection for this activity started in the spring of 2005 and continued into 2006. A suite of electrical geophysical surveys were run in combination with ground magnetic surveys; these surveys resulted in high-resolution subsurface data that portray subsurface fault geometry at the two sites and have identified structures not readily apparent from surface geologic mapping, potential field geophysical data, or surface effects fracture maps.

Theodore H. Asch; Donald Sweetkind; Bethany L. Burton; Erin L. Wallin

2009-02-10T23:59:59.000Z

260

Pressure test data reveal reservoir barriers/faults  

SciTech Connect (OSTI)

A review of transient pressure test data from an oil reservoir in Libya indicated not only the suspected fault barriers, but also the non-sealing portions of the faults. Extensive seismic data indicated much faulting, and directional trends had been interpreted to be generally northwest-southeast. The reservoir is a heterogeneous dolomite with average permeability of 40 to 50 md and contains neither natural fractures not stratification. Vertical displacement (throw) of each fault block is indicated to be within the range of the dolomite thickness, i.e., 40 to 180 ft. Therefore, when the fault throw is greater than reservoir thickness there is sealing, and when the throw is less than reservoir thickness the faults are non-sealing.

Hurd, J.D.

1984-07-30T23:59:59.000Z

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Abstract--The FREEDM grid utilizes solid state transformers (SST) and solid state fault interruption devices (FID) which may  

E-Print Network [OSTI]

bidirectional power flow between the system and the renewable energy sources. The system also includes solid of a Distribution Grid with Solid State Power Devices Karl Stefanski, Hengsi Qin, Badrul H. Chowdhury, Senior Member1 Abstract-- The FREEDM grid utilizes solid state transformers (SST) and solid state fault

Kimball, Jonathan W.

262

A Turing Machine Resisting Isolated Bursts Of Faults  

E-Print Network [OSTI]

We consider computations of a Turing machine under noise that causes consecutive violations of the machine's transition function. Given a constant upper bound B on the size of bursts of faults, we construct a Turing machine M(B) subject to faults that can simulate any fault-free machine under the condition that bursts are not closer to each other than V for an appropriate V = O(B^2).

Capuni, Ilir

2012-01-01T23:59:59.000Z

263

Fault Detection and Diagnosis Method for VAV Terminal Units  

E-Print Network [OSTI]

: Air density [kg/m3] NOMENCLATURE REFERENCES 1) IEA Annex 25, Building Optimization and Fault Diagnosis Source Book, Eds. J. Hyvarinen and S. Karki, Technical Research Center of Finland, 1996 2) Harunori Yoshida: Typical Faults of Air Conditioning..., IEA Annex 34 ?Detection and Diagnosis Methods in Real Building?, Eds. A. Dexter and J. Pakanen, Section C.2, pp.143-148, 2001 6) Harunori Yoshida, Sanjay Kumar, Yasunori Morita: Online Fault Detection and Diagnosis in VAV Air Handling Unit by RARX...

Miyata, M.; Yoshida, H.; Asada, M.; Wang, F.; Hashiguchi, S.

2004-01-01T23:59:59.000Z

264

PHOTOVOLTAIC DC ARC FAULT DETECTOR TESTING AT SANDIA NATIONAL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

PHOTOVOLTAIC DC ARC FAULT DETECTOR TESTING AT SANDIA NATIONAL LABORATORIES Jay Johnson 1 , Birger Pahl 2 , Charles Luebke 2 , Tom Pier 2 , Theodore Miller 3 , Jason Strauch 1 ,...

265

automatic fault management: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Software Fault Diagnosis by Exploiting Application Signatures Xiaoning Ding - The Ohio - The Ohio State University ABSTRACT Application problem diagnosis in complex...

266

Active Fault Controls At High-Temperature Geothermal Sites- Prospectin...  

Open Energy Info (EERE)

the level of unrecognized active faults present in these areas. Analysis of low-sun-angle aerial photography acquired over the Needle Rocks, Astor Pass, Empire, and Lee...

267

Controls on Fault-Hosted Fluid Flow: Preliminary Results from...  

Open Energy Info (EERE)

Results from the Coso Geothermal Field, CA Abstract cap rock, permeability, fault, fracture, clay, Coso Authors Davatzes, N.C.; Hickman and S.H. Published Geothermal Resource...

268

Active Fault Segments As Potential Earthquake Sources- Inferences...  

Open Energy Info (EERE)

have not been investigated to determine their subsurface geometry, faulting intensity and constituents (fluids, sediments) for proper characterization of tectonic rift...

269

Upper crustal faulting in an obliquely extending orogen, structural...  

Open Energy Info (EERE)

eastern California Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings: Upper crustal faulting in an obliquely extending orogen,...

270

A Fault-Oblivious Extreme-Scale Execution Environment (FOX)  

SciTech Connect (OSTI)

IBM Research’s contribution to the Fault Oblivious Extreme-scale Execution Environment (FOX) revolved around three core research deliverables: ? collaboration with Boston University around the Kittyhawk cloud infrastructure which both enabled a development and deployment platform for the project team and provided a fault-injection testbed to evaluate prototypes ? operating systems research focused on exploring role-based operating system technologies through collaboration with Sandia National Labs on the NIX research operating system and collaboration with the broader IBM Research community around a hybrid operating system model which became known as FusedOS ? IBM Research also participated in an advisory capacity with the Boston University SESA project, the core of which was derived from the K42 operating system research project funded in part by DARPA’s HPCS program. Both of these contributions were built on a foundation of previous operating systems research funding by the Department of Energy’s FastOS Program. Through the course of the X-stack funding we were able to develop prototypes, deploy them on production clusters at scale, and make them available to other researchers. As newer hardware, in the form of BlueGene/Q, came online, we were able to port the prototypes to the new hardware and release the source code for the resulting prototypes as open source to the community. In addition to the open source coded for the Kittyhawk and NIX prototypes, we were able to bring the BlueGene/Q Linux patches up to a more recent kernel and contribute them for inclusion by the broader Linux community. The lasting impact of the IBM Research work on FOX can be seen in its effect on the shift of IBM’s approach to HPC operating systems from Linux and Compute Node Kernels to role-based approaches as prototyped by the NIX and FusedOS work. This impact can be seen beyond IBM in follow-on ideas being incorporated into the proposals for the Exasacale Operating Systems/Runtime program.

Van Hensbergen, Eric; Speight, William; Xenidis, Jimi

2013-03-15T23:59:59.000Z

271

Long-range dispersion and spatial diffusion of fault waves in the Burridge-Knopoff earthquake model  

E-Print Network [OSTI]

The Burridge-Knopoff model of earthquakes has recently gained increased interest for the consistency of the predicted energy released by sismic faults, with the Gutenberg-Richter scaling law. The present work suggests an improvement of this model to account for long-range dispersions and large spatial diffusion of sismic faults. An enhancement of the threshold speed of shock waves driven by translated fault fronts is pointed out and shown to result from the interactions between components of the system situated far aways them and others. Due to the enhanced threshold speed, size of the sismic fault gets increased but a control effect can still be gained from tunable dispersion extent irrespective of the total length of the system. To the viewpoint of the Burridge-Knopoff block-lattice model, this last consideration introduces the possibility of sizable but finite interactions among infinitely aligned massive blocks. Implications on the fault wave propagation are examined by numerical simulations of the improved nonlinear partial differential equation.

Alain M. Dikandé

2004-02-13T23:59:59.000Z

272

Efficient Fault Tolerance: an Approach to Deal with Transient Faults in Multiprocessor Architectures  

E-Print Network [OSTI]

, 36, 56126 Pisa, Italy ** IEI/CNR, Via S. Maria, 46, 56126 Pisa, Italy Abstract Dynamic error, while making efficient use of the available resources. To this end, dynamic error processing must is integrated with a mechanism for dynamic error processing in a complete fault tolerance strategy. Reliability

Firenze, Università degli Studi di

273

The structure and evolution of small-displacement strike-slip faults in porous sandstone  

E-Print Network [OSTI]

relationship between the progressive addition of subsidiary fault segments (deformation bands) and earlier-formed linkage structures. The along-strike variability and distribution of fault structure are documented and used to assess the role of early fault...

Schafer, Kirk Wyatt

2002-01-01T23:59:59.000Z

274

Early Holocene and Late Pleistocene slip rates of the southern Dead Sea Fault determined from 10  

E-Print Network [OSTI]

sites located along the Wadi Araba Fault (WAF) segment of the Dead Sea Fault are targeted on the DSF, focusing on the Wadi Araba Fault (WAF) segment (Figure 1b). The WAF strikes N12°E for about 160

Klinger, Yann

275

Fewer Faults for Faster Computing | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibility ofSmall15.000TechnologyTuneFewer Faults for Faster

276

Sandia National Laboratories: parallel arc-fault  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1developmentturbine bladelifetime ismobileparallel arc-fault Sandia Research on PV

277

Sandia National Laboratories: arc-fault detector  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1development Sandia, NREL Release Wavearc-fault circuit interrupter Sandia Research

278

Sandia National Laboratories: Arc-Fault Detection  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared0Energy Advanced Nuclear EnergyCouncilSandia's Work withArc-Fault

279

Challenges in the Modeling and Quantitative Analysis of Safety-Critical Automotive Systems!  

E-Print Network [OSTI]

! Probabilistic FMEA! Probabilistic Analysis of System Architectures! ! Conclusion! 3! #12;ISO 26262: Road! ,,identify Failures"! - Qualitative FMEA! ! - Qualitative Fault Tree Analysis! ! - Event Tree Analysis! Quantitative Methods! ,,predict frequency of failures"! - Quantitative FMEA! ! - Quantitative Fault Tree

Leue, Stefan

280

SciTech Connect: Development of Asset Fault Signatures for Prognostic...  

Office of Scientific and Technical Information (OSTI)

Development of Asset Fault Signatures for Prognostic and Health Management in the Nuclear Industry Citation Details In-Document Search Title: Development of Asset Fault Signatures...

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Fault Analysis at a Wind Power Plant for One Year of Observation: Preprint  

SciTech Connect (OSTI)

This paper analyzes the fault characteristics observed at a wind power plant, and the behavior of the wind power plant under fault events.

Muljadi, E.; Mills, Z.; Foster, R.; Conto, J.; Ellis, A.

2008-07-01T23:59:59.000Z

282

The faults that move during earthquakes do not always come  

E-Print Network [OSTI]

often live near active faults, because where there is a fault there is usually a water supply. And that means these places become part of major trade routes, like the Silk Roads across Asia from Xi urban building. What is even more frighten- ing is that in many parts of the world poor

Cipolla, Roberto

283

Fault detection and diagnosis capabilities of test sequence selection  

E-Print Network [OSTI]

Review Fault detection and diagnosis capabilities of test sequence selection methods based on the FSM model T Ramalingam*, Anindya Dast and K ThuIasiraman* Different test sequence selection methods resolution in diagnosing the fault. The test sequence selection methods are then compared based on the length

Thulsiraman, Krishnaiyan

284

SEISMIC INVESTIGATION OF WRENCH FAULTING AND FRACTURING AT RULISON  

E-Print Network [OSTI]

to gas production at Rulison. Fracture zones are associated with fault trends and areas of deformation networks that help determine gas migration and accumulation. This thesis presents the characterization of the complex wrench fault network at Rulison Field, and its linkage to enhanced natural fracture zones. Rulison

285

Using Reinforcement Learning for Proactive Network Fault Management  

E-Print Network [OSTI]

fault management demands intelligent man­ agement actions be taken by central manager or remote agents.g., alarms) which appear sequentially. For example, on the manager's side, polling devices randomly (orUsing Reinforcement Learning for Proactive Network Fault Management Qiming He, Mark A. Shayman

Shayman, Mark A.

286

Development of Hydrologic Characterization Technology of Fault Zones  

SciTech Connect (OSTI)

Through an extensive literature survey we find that there is very limited amount of work on fault zone hydrology, particularly in the field using borehole testing. The common elements of a fault include a core, and damage zones. The core usually acts as a barrier to the flow across it, whereas the damage zone controls the flow either parallel to the strike or dip of a fault. In most of cases the damage zone isthe one that is controlling the flow in the fault zone and the surroundings. The permeability of damage zone is in the range of two to three orders of magnitude higher than the protolith. The fault core can have permeability up to seven orders of magnitude lower than the damage zone. The fault types (normal, reverse, and strike-slip) by themselves do not appear to be a clear classifier of the hydrology of fault zones. However, there still remains a possibility that other additional geologic attributes and scaling relationships can be used to predict or bracket the range of hydrologic behavior of fault zones. AMT (Audio frequency Magneto Telluric) and seismic reflection techniques are often used to locate faults. Geochemical signatures and temperature distributions are often used to identify flow domains and/or directions. ALSM (Airborne Laser Swath Mapping) or LIDAR (Light Detection and Ranging) method may prove to be a powerful tool for identifying lineaments in place of the traditional photogrammetry. Nonetheless not much work has been done to characterize the hydrologic properties of faults by directly testing them using pump tests. There are some uncertainties involved in analyzing pressure transients of pump tests: both low permeability and high permeability faults exhibit similar pressure responses. A physically based conceptual and numerical model is presented for simulating fluid and heat flow and solute transport through fractured fault zones using a multiple-continuum medium approach. Data from the Horonobe URL site are analyzed to demonstrate the proposed approach and to examine the flow direction and magnitude on both sides of a suspected fault. We describe a strategy for effective characterization of fault zone hydrology. We recommend conducting a long term pump test followed by a long term buildup test. We do not recommend isolating the borehole into too many intervals. We do recommend ensuring durability and redundancy for long term monitoring.

Karasaki, Kenzi; Onishi, Tiemi; Wu, Yu-Shu

2008-03-31T23:59:59.000Z

287

Test generation and fault detection for VLSI PPL circuits  

SciTech Connect (OSTI)

The problem of design for testability of PPL logic circuits is addressed. A test-generation package was developed which utilizes the special features of PPL logic to generate high fault coverage test vectors at a reduced computational cost. The test strategy assumes that one of the scan design techniques is used. A new methodology for test-vectors compaction without compromising the fault coverage is also proposed. A fault-oriented test-generation algorithm combined with a heuristic test-generation algorithm are the essential ingredients of this package. The fault-oriented algorithm uses a modified D-algorithm which includes look-ahead features and a new seven-valued logic to improve the average speed of the test-generation process. Fault coverages in the 90% range were obtained using the test sequences generated by this package.

Amin, A.A.M.

1987-01-01T23:59:59.000Z

288

Use of Fault Tree Analysis for Automotive Reliability and Safety Analysis  

SciTech Connect (OSTI)

Fault tree analysis (FTA) evolved from the aerospace industry in the 1960's. A fault tree is deductive logic model that is generated with a top undesired event in mind. FTA answers the question, ''how can something occur?'' as opposed to failure modes and effects analysis (FMEA) that is inductive and answers the question, ''what if?'' FTA is used in risk, reliability and safety assessments. FTA is currently being used by several industries such as nuclear power and chemical processing. Typically the automotive industries uses failure modes and effects analysis (FMEA) such as design FMEAs and process FMEAs. The use of FTA has spread to the automotive industry. This paper discusses the use of FTA for automotive applications. With the addition automotive electronics for various applications in systems such as engine/power control, cruise control and braking/traction, FTA is well suited to address failure modes within these systems. FTA can determine the importance of these failure modes from various perspectives such as cost, reliability and safety. A fault tree analysis of a car starting system is presented as an example.

Lambert, H

2003-09-24T23:59:59.000Z

289

Acceleration and evolution of faults: An example from the Hunter MountainPanamint Valley fault zone, Eastern California  

E-Print Network [OSTI]

: R.D. van der Hilst Keywords: geodesy fault evolution InSAR rock mechanics Western United States assumes a monotonic increase in slip rate with time as the fault matures and straightens. The rate. However, before this can be realized, we need to better understand the various sources for discrepancies

Amelung, Falk

290

Boullier The fault zone geology 1 Fault zone geology: lessons from drilling through the Nojima and 1  

E-Print Network [OSTI]

drilling through the Nojima and 1 Chelungpu faults 2 3 Anne-Marie Boullier 4-Marie.Boullier@obs.ujf-grenoble.fr 8 9 Abstract 10 Several drilling projects have been conducted through significant topics 32 for future research, one of which was "fault zone drilling

Paris-Sud XI, Université de

291

Boullier The fault zone geology 1 Fault zone geology: lessons from drilling through the Nojima and 1  

E-Print Network [OSTI]

drilling through the Nojima and 1 Chelungpu faults 2 3 Anne-Marie Boullier 4-Marie.Boullier@obs.ujf-grenoble.fr 8 9 Abstract 10 Several drilling projects have been conducted through was "fault zone drilling combined with surface-based 33 geophysical and geological

Boyer, Edmond

292

Feb. 11, 2008 Advanced Fault Tolerance Solutions for High Performance Computing 1/47 Advanced Fault Tolerance Solutions  

E-Print Network [OSTI]

Feb. 11, 2008 Advanced Fault Tolerance Solutions for High Performance Computing 1/47 RAS RAS Advanced Fault Tolerance Solutions for High Performance Computing Christian Engelmann Oak Ridge National Solutions for High Performance Computing 2/47 · Nation's largest energy laboratory · Nation's largest

Engelmann, Christian

293

Lightweight storage and overlay networks for fault tolerance.  

SciTech Connect (OSTI)

The next generation of capability-class, massively parallel processing (MPP) systems is expected to have hundreds of thousands to millions of processors, In such environments, it is critical to have fault-tolerance mechanisms, including checkpoint/restart, that scale with the size of applications and the percentage of the system on which the applications execute. For application-driven, periodic checkpoint operations, the state-of-the-art does not provide a scalable solution. For example, on today's massive-scale systems that execute applications which consume most of the memory of the employed compute nodes, checkpoint operations generate I/O that consumes nearly 80% of the total I/O usage. Motivated by this observation, this project aims to improve I/O performance for application-directed checkpoints through the use of lightweight storage architectures and overlay networks. Lightweight storage provide direct access to underlying storage devices. Overlay networks provide caching and processing capabilities in the compute-node fabric. The combination has potential to signifcantly reduce I/O overhead for large-scale applications. This report describes our combined efforts to model and understand overheads for application-directed checkpoints, as well as implementation and performance analysis of a checkpoint service that uses available compute nodes as a network cache for checkpoint operations.

Oldfield, Ron A.

2010-01-01T23:59:59.000Z

294

Evaluation Of Fault-Tolerant Policies Using Simulation  

SciTech Connect (OSTI)

Various mechanisms for fault-tolerance (FT) are used today in order to reduce the impact of failures on application execution. In the case of system failure, standard FT mechanisms are checkpoint/restart (for reactive FT) and migration (for pro-active FT). However, each of these mechanisms create an overhead on application execution, overhead that for instance becomes critical on large-scale systems where previous studies have shown that applications may spend more time checkpointing state than performing useful work. In order to decrease this overhead, researchers try to both optimize existing FT mechanisms and implement new FT policies. For instance, combining reactive and pro-active approaches in order to decrease the number of checkpoints that must be performed during the application 's execution. However, currently no solutions exist which enable the evaluation of these FT approaches through simulation, instead experimentations must be done using real platforms. This increases complexity and limits experimentation into alternate solutions. This paper presents a simulation framework that evaluates different FT mechanisms and policies. The framework uses system failure logs for the simulation with a default behavior based on logs taken from the ASCI White at Lawrence Livermore National Laboratory. We evaluate the accuracy of our simulator comparing simulated results with those taken from experiments done on a 32-node compute cluster. Therefore such a simulator can be used to develop new FT policies and/or to tune existing policies.

Tikotekar, Anand A [ORNL; Vallee, Geoffroy R [ORNL; Naughton, III, Thomas J [ORNL; Scott, Stephen L [ORNL

2007-01-01T23:59:59.000Z

295

UniFI: Leveraging Non-Volatile Memories for a Unified Fault Tolerance and Idle Power Management Technique  

E-Print Network [OSTI]

dissipation but also to make power - proportional to performance by managing idle power. The twin challenges noise margins and thermal cycling [42]. Technology scaling and power management both impact systemUniFI: Leveraging Non-Volatile Memories for a Unified Fault Tolerance and Idle Power Management

Wood, David A.

296

Abstract --A systematic framework for reliability assessment and fault-tolerant design of multiphase dc-dc  

E-Print Network [OSTI]

reliability. Index Terms--Markov reliability modeling, maximum power point tracking, photovoltaics, switch1 Abstract -- A systematic framework for reliability assessment and fault-tolerant design of multiphase dc-dc converters deployed in photovoltaic applications is presented. System-level steady

Liberzon, Daniel

297

Robust STATCOM Control for the Enhancement of Fault Ride-Through Capability of Fixed Speed Wind Generators  

E-Print Network [OSTI]

-slip relationships as well as through simulations. The wind generator is a highly nonlinear system, which is modelled power generation. This type of wind generator always consumes reactive power from the grid. WhenRobust STATCOM Control for the Enhancement of Fault Ride-Through Capability of Fixed Speed Wind

Pota, Himanshu Roy

298

Built-in Self-Test and Fault Diagnosis for Lab-on-Chip Using Digital Microfluidic Logic Gates  

E-Print Network [OSTI]

Built-in Self-Test and Fault Diagnosis for Lab-on-Chip Using Digital Microfluidic Logic Gates Yang University, Durham, NC 27708, USA Abstract Dependability is an important system attribute for microfluidic are cumbersome and error-prone. We present a built-in self-test (BIST) method for digital microfluidic lab

Chakrabarty, Krishnendu

299

Observations and modeling of shallow fault creep along the San Andreas Fault System  

E-Print Network [OSTI]

the low normal stress in unconsolidated sediments. Chapter 3is associated with the unconsolidated sediments at shallowpore pressures in the unconsolidated sediments. Introduction

Wei, Meng

2011-01-01T23:59:59.000Z

300

Self field triggered superconducting fault current limiter  

DOE Patents [OSTI]

A superconducting fault current limiter array with a plurality of superconductor elements arranged in a meanding array having an even number of supconductors parallel to each other and arranged in a plane that is parallel to an odd number of the plurality of superconductors, where the odd number of supconductors are parallel to each other and arranged in a plane that is parallel to the even number of the plurality of superconductors, when viewed from a top view. The even number of superconductors are coupled at the upper end to the upper end of the odd number of superconductors. A plurality of lower shunt coils each coupled to the lower end of each of the even number of superconductors and a plurality of upper shunt coils each coupled to the upper end of each of the odd number of superconductors so as to generate a generally orthoganal uniform magnetic field during quenching using only the magenetic field generated by the superconductors.

Tekletsadik, Kasegn D. (Rexford, NY)

2008-02-19T23:59:59.000Z

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Locating hardware faults in a parallel computer  

DOE Patents [OSTI]

Locating hardware faults in a parallel computer, including defining within a tree network of the parallel computer two or more sets of non-overlapping test levels of compute nodes of the network that together include all the data communications links of the network, each non-overlapping test level comprising two or more adjacent tiers of the tree; defining test cells within each non-overlapping test level, each test cell comprising a subtree of the tree including a subtree root compute node and all descendant compute nodes of the subtree root compute node within a non-overlapping test level; performing, separately on each set of non-overlapping test levels, an uplink test on all test cells in a set of non-overlapping test levels; and performing, separately from the uplink tests and separately on each set of non-overlapping test levels, a downlink test on all test cells in a set of non-overlapping test levels.

Archer, Charles J.; Megerian, Mark G.; Ratterman, Joseph D.; Smith, Brian E.

2010-04-13T23:59:59.000Z

302

rMPI : increasing fault resiliency in a message-passing environment.  

SciTech Connect (OSTI)

As High-End Computing machines continue to grow in size, issues such as fault tolerance and reliability limit application scalability. Current techniques to ensure progress across faults, like checkpoint-restart, are unsuitable at these scale due to excessive overheads predicted to more than double an applications time to solution. Redundant computation, long used in distributed and mission critical systems, has been suggested as an alternative to checkpoint-restart on its own. In this paper we describe the rMPI library which enables portable and transparent redundant computation for MPI applications. We detail the design of the library as well as two replica consistency protocols, outline the overheads of this library at scale on a number of real-world applications, and finally outline the significant increase in an applications time to solution at extreme scale as well as show the scenarios in which redundant computation makes sense.

Stearley, Jon R.; Laros, James H., III; Ferreira, Kurt Brian; Pedretti, Kevin Thomas Tauke; Oldfield, Ron A.; Riesen, Rolf (IBM Research, Ireland); Brightwell, Ronald Brian

2011-04-01T23:59:59.000Z

303

Efficient and flexible fault tolerance and migration of scientific simulation using CUMULVS  

SciTech Connect (OSTI)

Many practical scientific applications would benefit from a simple checkpointing mechanism to provide automatic restart or recovery in response to faults and failures. CUMULVS is a middleware infrastructure for interacting with parallel scientific simulations to support online visualization and computational steering. The base CUMULVS system has been extended to provide a user-level mechanism for collecting checkpoints in a parallel simulation program. Via the same interface that CUMULVS uses to identify and describe data fields for visualization and parameters for steering, the user application can select the minimal program state necessary to restart or migrate an application task. The CUMULVS run-time system uses this information to efficiently recover fault-tolerant applications by restarting failed tasks. Application tasks can also be migrated -- even across heterogeneous architecture boundaries -- to achieve load balancing or to improve the task`s locality with a required resource. This paper describes the CUMULVS interface for checkpointing, the issues faced in utilizing this interface when developing fault-tolerant and migrating applications, and the direction of future research in this area.

Kohl, J.A.; Papadopoulos, P.M.

1998-05-01T23:59:59.000Z

304

Visualization of stacking faults in fcc crystals in plastic deformations  

E-Print Network [OSTI]

Using molecular dynamics simulation, we investigate the dynamics of stacking faults in fcc crystals in uniaxial stretching in a Lennard-Jones binary mixture composed of 4096 particles in three dimensions. We visualize stacking faults using a disorder variable $D_j(t)$ for each particle $j$ constructed from local bond order parameters based on spherical harmonics (Steinhardt order parameters). Also introducing a method of bond breakage, we examine how stacking faults are formed and removed by collective particle motions. These processes are relevant in plasticity of fcc crystals.

Takeshi Kawasaki; Akira Onuki

2011-11-27T23:59:59.000Z

305

On-Line Fault Detection and Compensation of Hydraulic Driven Machines Using Modelling Techniques  

E-Print Network [OSTI]

On-Line Fault Detection and Compensation of Hydraulic Driven Machines Using Modelling Techniques C purpose of hydraulic driven machines as well as for the compensation of incipient faults where applicable: Modelling, Simulation, Hydraulic motors, Fault detection, Fault Compensation 1. Introduction Model

Thawonmas, Ruck

306

Thermal anomalies indicate preferential flow along faults in unconsolidated sedimentary aquifers  

E-Print Network [OSTI]

Thermal anomalies indicate preferential flow along faults in unconsolidated sedimentary aquifers V in unconsolidated siliciclastic aquifers off-set by normal-faults in the Lower Rhine Embayment, Germany. High plane. Most current models of fault hydrology in unconsolidated sedimentary sequences assume faults

Bense, Victor

307

Geometry and scaling relations of a population of very small rift-related normal faults  

E-Print Network [OSTI]

normal faults within the Solite Quarry of the Dan River rift basin range in length from a few millimetres AND SCALING RELATIONS The small normal faults are present in quarries of the Virginia Solite Corporation outcrops and quarried boulders (Fig. 2). The fault traces are typically straight, although the fault tips

308

Analysis of the growth of strike-slip faults using effective medium theory  

SciTech Connect (OSTI)

Increases in the dimensions of strike-slip faults including fault length, thickness of fault rock and the surrounding damage zone collectively provide quantitative definition of fault growth and are commonly measured in terms of the maximum fault slip. The field observations indicate that a common mechanism for fault growth in the brittle upper crust is fault lengthening by linkage and coalescence of neighboring fault segments or strands, and fault rock-zone widening into highly fractured inner damage zone via cataclastic deformation. The most important underlying mechanical reason in both cases is prior weakening of the rocks surrounding a fault's core and between neighboring fault segments by faulting-related fractures. In this paper, using field observations together with effective medium models, we analyze the reduction in the effective elastic properties of rock in terms of density of the fault-related brittle fractures and fracture intersection angles controlled primarily by the splay angles. Fracture densities or equivalent fracture spacing values corresponding to the vanishing Young's, shear, and quasi-pure shear moduli were obtained by extrapolation from the calculated range of these parameters. The fracture densities or the equivalent spacing values obtained using this method compare well with the field data measured along scan lines across the faults in the study area. These findings should be helpful for a better understanding of the fracture density/spacing distribution around faults and the transition from discrete fracturing to cataclastic deformation associated with fault growth and the related instabilities.

Aydin, A.; Berryman, J.G.

2009-10-15T23:59:59.000Z

309

Evaluation of a Decoupling-Based Fault Detection and Diagnostic Technique - Part I: Field Emulation Evaluation  

E-Print Network [OSTI]

), evaporator fouling (Evapfoul), liquid-line restriction (Llrestr), low refrigerant charge (Reflow), and refrigerant high charge (Refhigh). Except for refrigerant charge and compressor leakage faults for which five fault levels were introduced, four fault... for these tests. The method could detect low refrigerant charge and loss of compressor performance at the lowest levels introduced and all other faults at the second level. All of the faults could be reliably diagnosed before a 5% degradation in capacity...

Li, H.; Braun, J.

2006-01-01T23:59:59.000Z

310

arcing fault fires: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

stacking faults at a production-rate of few gmin. A guideline for controlling the number of layers of such FLG has also been suggested. Karmakar, Soumen; Lalla, Niranjan P;...

311

Microgrid Fault Protection Based on Symmetrical and Differential Current Components  

E-Print Network [OSTI]

Microgrid Fault Protection Based on Symmetrical and Differential Current Components Prepared.........................................................................................8 2. AEP CERTS MICROGRID .........................................................................9 ........................................................................67 #12;3 Index of Figures Figure 1: Schematic representation of the AEP CERTS microgrid

312

Characteristics of Wind Turbines Under Normal and Fault Conditions: Preprint  

SciTech Connect (OSTI)

This paper investigates the characteristics of a variable-speed wind turbine connected to a stiff or weak grid under normal and fault conditions and the role of reactive power compensation.

Muljadi, E.; Butterfield, C. P.; Parsons, B.; Ellis, A.

2007-02-01T23:59:59.000Z

313

Faults as potential hydrocarbon barriers, Arroyo Grande, California  

E-Print Network [OSTI]

Faulting in a sandstone introduces properties which are different from the country rock. Previous work has shown that these new properties can significantly impede the flow of hydrocarbons through the country rock. This thesis seeks to analyze...

Switek, Daniel Paul

1994-01-01T23:59:59.000Z

314

An information model for inter-organizational fault Patricia Marcu  

E-Print Network [OSTI]

in the IT Infrastructure Library (ITIL) [2] and related frameworks in the area of IT service management (ITSM). But since ITIL and the related ITSM frameworks do not consider specific aspects of inter- organizational (fault

315

Understanding Fault Characteristics And Sediment Depth For Geothermal...  

Open Energy Info (EERE)

Fault Characteristics And Sediment Depth For Geothermal Exploration Using 3D Gravity Inversion In Walker Valley, Nevada Jump to: navigation, search OpenEI Reference LibraryAdd to...

316

Non-intrusive fault detection in reciprocating compressors  

E-Print Network [OSTI]

This thesis presents a set of techniques for non-intrusive sensing and fault detection in reciprocating compressors driven by induction motors. The procedures developed here are "non-intrusive" because they rely only on ...

Schantz, Christopher James

2011-01-01T23:59:59.000Z

317

CAPRI : a common architecture for distributed probabilistic Internet fault diagnosis  

E-Print Network [OSTI]

This thesis presents a new approach to root cause localization and fault diagnosis in the Internet based on a Common Architecture for Probabilistic Reasoning in the Internet (CAPRI) in which distributed, heterogeneous ...

Lee, George J. (George Janbing), 1979-

2007-01-01T23:59:59.000Z

318

CAPRI: A Common Architecture for Distributed Probabilistic Internet Fault Diagnosis  

E-Print Network [OSTI]

This thesis presents a new approach to root cause localization and fault diagnosis in the Internet based on a Common Architecture for Probabilistic Reasoning in the Internet (CAPRI) in which distributed, heterogeneous ...

Lee, George J.

2007-06-04T23:59:59.000Z

319

Lossless fault-tolerant data structures with additive overhead  

E-Print Network [OSTI]

We develop the first dynamic data structures that tolerate ? memory faults, lose no data, and incur only an O(? ) additive overhead in overall space and time per operation. We obtain such data structures for arrays, linked ...

Christiano, Paul F.

320

anatolian fault zone: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

across the Mudurnu segment of the North Anatolian Fault Zone (NAFZ) in northwestern Turkey Ben-Zion, Yehuda 2 Velocity contrast across the 1944 rupture zone of the North...

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

STRESS AND FAULTING IN THE COSO GEOTHERMAL FIELD: UPDATE AND...  

Open Energy Info (EERE)

FLANK AND COSO WASH Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings: STRESS AND FAULTING IN THE COSO GEOTHERMAL FIELD: UPDATE AND...

322

The northwest extension of the Meers Fault in southwestern Oklahoma  

E-Print Network [OSTI]

THE NORTHWEST EXTENSION OF THE MEERS FAULT IN SOUTIRVESTERN OKLAHOMA A Thesis by HASAN CETIN Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... May 1991 Major Subject: Geology THE NORTHWEST EXTENSION OF THE MEERS FAULT IN SOUTHWESTERN OKLAHOMA A Thesis by HASAN CETIN Approved as to style and content by: Norman R. ford (Chair of ommittee) Chr stopher C. Mathewson (Member) ne A...

Cetin, Hasan

1991-01-01T23:59:59.000Z

323

Two Similarity Measure Approaches to Whole Building Fault Diagnosis  

E-Print Network [OSTI]

consumption in buildings using similarity measures. The method is referred to as the cosine similarity method if cosine similarity is adopted and is referred to as the Euclidean distance similarity method if Euclidean distance similarity is implemented.... Fig. 1 Block diagram for diagnosing abnormal energy consumption Step 1: Reference Control Change Library Determination Whole building fault diagnosis is different from component level fault diagnosis. It can only give a general clue, for example...

Lin, G.; Claridge, D.

2012-01-01T23:59:59.000Z

324

Sideband Algorithm for Automatic Wind Turbine Gearbox Fault Detection and Diagnosis: Preprint  

SciTech Connect (OSTI)

Improving the availability of wind turbines (WT) is critical to minimize the cost of wind energy, especially for offshore installations. As gearbox downtime has a significant impact on WT availabilities, the development of reliable and cost-effective gearbox condition monitoring systems (CMS) is of great concern to the wind industry. Timely detection and diagnosis of developing gear defects within a gearbox is an essential part of minimizing unplanned downtime of wind turbines. Monitoring signals from WT gearboxes are highly non-stationary as turbine load and speed vary continuously with time. Time-consuming and costly manual handling of large amounts of monitoring data represent one of the main limitations of most current CMSs, so automated algorithms are required. This paper presents a fault detection algorithm for incorporation into a commercial CMS for automatic gear fault detection and diagnosis. The algorithm allowed the assessment of gear fault severity by tracking progressive tooth gear damage during variable speed and load operating conditions of the test rig. Results show that the proposed technique proves efficient and reliable for detecting gear damage. Once implemented into WT CMSs, this algorithm can automate data interpretation reducing the quantity of information that WT operators must handle.

Zappala, D.; Tavner, P.; Crabtree, C.; Sheng, S.

2013-01-01T23:59:59.000Z

325

Probability Estimation of CO2 Leakage Through Faults at Geologic Carbon Sequestration Sites  

SciTech Connect (OSTI)

Leakage of CO{sub 2} and brine along faults at geologic carbon sequestration (GCS) sites is a primary concern for storage integrity. The focus of this study is on the estimation of the probability of leakage along faults or fractures. This leakage probability is controlled by the probability of a connected network of conduits existing at a given site, the probability of this network encountering the CO{sub 2} plume, and the probability of this network intersecting environmental resources that may be impacted by leakage. This work is designed to fit into a risk assessment and certification framework that uses compartments to represent vulnerable resources such as potable groundwater, health and safety, and the near-surface environment. The method we propose includes using percolation theory to estimate the connectivity of the faults, and generating fuzzy rules from discrete fracture network simulations to estimate leakage probability. By this approach, the probability of CO{sub 2} escaping into a compartment for a given system can be inferred from the fuzzy rules. The proposed method provides a quick way of estimating the probability of CO{sub 2} or brine leaking into a compartment. In addition, it provides the uncertainty range of the estimated probability.

Zhang, Yingqi; Oldenburg, Curt; Finsterle, Stefan; Jordan, Preston; Zhang, Keni

2008-11-01T23:59:59.000Z

326

Helium isotopes in geothermal systems- Iceland, The Geysers,...  

Open Energy Info (EERE)

MOR type magmatic He again implying an active volcanic source possibly a "leaky" transform related to the San Andreas Fault System. Raft River contains only crustal He...

327

Realistic fault modeling and quality test generation of combined delay faults  

E-Print Network [OSTI]

. Summary . . Page . . Vi . Vii . 1X . I 2 . 5 . 5 . 6 . 6 . . . 14 . 14 . 16 . 17 . 18 . 18 . 20 . 20 23 , 33 . 34 36 36 38 . . 44 53 53 2. Future Work . . . . . REFERENCES . VITA Page 54 55 LIST OF FIGURES Fig. 1. Fault... 24 Fig. 10. Fig. 11. Fig. 12. Fig. 13. Fig. 14. Fig. 15. Fig. 16. Fig. 17. Fig. 18. Fig. 19. Fig. 20. Fig. 21. Fig. 22. Fig. 23. Fig. 24. Fig. 25. Path generation algorithm. Example for graph theory . Propagation along longest path...

Thadhlani, Ajaykumar A

2001-01-01T23:59:59.000Z

328

Abstract--A method for fault detection and isolation is proposed and applied to inverter faults in multi-phase drives. An  

E-Print Network [OSTI]

energy source, a five- leg inverter and a five-phase star-connected PMSM. It has to be noticed that all-magnet synchronous machine (PMSM) drive. The faults under consideration are: open-phase faults and open-switch faults

Boyer, Edmond

329

Final Technical Report Recovery Act: Online Nonintrusive Condition Monitoring and Fault Detection for Wind Turbines  

SciTech Connect (OSTI)

The penetration of wind power has increased greatly over the last decade in the United States and across the world. The U.S. wind power industry installed 1,118 MW of new capacity in the first quarter of 2011 alone and entered the second quarter with another 5,600 MW under construction. By 2030, wind energy is expected to provide 20% of the U.S. electricity needs. As the number of wind turbines continues to grow, the need for effective condition monitoring and fault detection (CMFD) systems becomes increasingly important [3]. Online CMFD is an effective means of not only improving the reliability, capacity factor, and lifetime, but it also reduces the downtime, energy loss, and operation and maintenance (O&M) of wind turbines. The goal of this project is to develop novel online nonintrusive CMFD technologies for wind turbines. The proposed technologies use only the current measurements that have been used by the control and protection system of a wind turbine generator (WTG); no additional sensors or data acquisition devices are needed. Current signals are reliable and easily accessible from the ground without intruding on the wind turbine generators (WTGs) that are situated on high towers and installed in remote areas. Therefore, current-based CMFD techniques have great economic benefits and the potential to be adopted by the wind energy industry. Specifically, the following objectives and results have been achieved in this project: (1) Analyzed the effects of faults in a WTG on the generator currents of the WTG operating at variable rotating speed conditions from the perspective of amplitude and frequency modulations of the current measurements; (2) Developed effective amplitude and frequency demodulation methods for appropriate signal conditioning of the current measurements to improve the accuracy and reliability of wind turbine CMFD; (3) Developed a 1P-invariant power spectrum density (PSD) method for effective signature extraction of wind turbine faults with characteristic frequencies in the current or current demodulated signals, where 1P stands for the shaft rotating frequency of a WTG; (4) Developed a wavelet filter for effective signature extraction of wind turbine faults without characteristic frequencies in the current or current demodulated signals; (5) Developed an effective adaptive noise cancellation method as an alternative to the wavelet filter method for signature extraction of wind turbine faults without characteristic frequencies in the current or current demodulated signals; (6) Developed a statistical analysis-based impulse detection method for effective fault signature extraction and evaluation of WTGs based on the 1P-invariant PSD of the current or current demodulated signals; (7) Validated the proposed current-based wind turbine CMFD technologies through extensive computer simulations and experiments for small direct-drive WTGs without gearboxes; and (8) Showed, through extensive experiments for small direct-drive WTGs, that the performance of the proposed current-based wind turbine CMFD technologies is comparable to traditional vibration-based methods. The proposed technologies have been successfully applied for detection of major failures in blades, shafts, bearings, and generators of small direct-drive WTGs. The proposed technologies can be easily integrated into existing wind turbine control, protection, and monitoring systems and can be implemented remotely from the wind turbines being monitored. The proposed technologies provide an alternative to vibration-sensor-based CMFD. This will reduce the cost and hardware complexity of wind turbine CMFD systems. The proposed technologies can also be combined with vibration-sensor-based methods to improve the accuracy and reliability of wind turbine CMFD systems. When there are problems with sensors, the proposed technologies will ensure proper CMFD for the wind turbines, including their sensing systems. In conclusion, the proposed technologies offer an effective means to achieve condition-based smart maintenance for wind turbines and have a gre

Wei Qiao

2012-05-29T23:59:59.000Z

330

Software for fault detection in HVAC systems in commercial buildings  

E-Print Network [OSTI]

The building sector of the United States currently consumes over 41% of the United States primary energy supply. Estimates suggest that between 5 and 30% of any building's annual energy consumption is unknowingly wasted ...

Deshmukh, Suhrid Avinash

2014-01-01T23:59:59.000Z

331

Dating of major normal fault systems using thermochronology-...  

Open Energy Info (EERE)

of 70-100Cm.y. The apparent slip rate along the Raft River detachment, recorded in spatial gradients of apatite fission track ages, is 7 mmyr between 13.5 and 7.4 Ma and is...

332

Fault detection of multivariable system using its directional properties  

E-Print Network [OSTI]

); Sannuti and Saberi (1987); Tokarzewski (1996 and 1998) and Wolovich (1973). MacFarlane and Karcanias, 1976 [3] presented their own definition of zeros. This also led to a number of different definitions of transmission zeros and they are not necessarily...; MacFarlane and Karcanias, 1976; Misra et al, 1994; Sannuti and Saberi, 1987; Wolovich, 1973, Rosenbrock, 1970. b) Those connected with the concept of state-zero and input-zero directions introduced in MacFarlane and Karcanias, 1976. c) Those...

Pandey, Amit Nath

2006-04-12T23:59:59.000Z

333

Fault Detection and Diagnosis in Building HVAC Systems  

E-Print Network [OSTI]

box, fan, and heating/cooling coils in air-handling units.fan efficiency and coil duty. In this chapter, we present a statistical approach for rooftop unit

Najafi, Massieh

2010-01-01T23:59:59.000Z

334

Deadlock Analysis for a FaultTolerant System  

E-Print Network [OSTI]

. The approach is based on CSP specifications and the model­checking tool FDR. The task is split into manageable subtasks by applying an abstraction technique for restricting the specifications to the essential developed for the application. 1 Introduction One of the essential obstacles for the acceptance of formal

Peleska, Jan - Fachbereich 3

335

Dating of major normal fault systems using thermochronology- An example  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision has beenFfe2fb55-352f-473b-a2dd-50ae8b27f0a6 No revision has been approved for thisDatabus - Qfrom the

336

Supporting fault-tolerant communication in networks  

E-Print Network [OSTI]

is designing a distributed storage system tolerant to Byzantine failure of some nodes. A distributed storage system stores data at multiple nodes and can be accessed concur- rently by multiple clients. The nodes and clients can be geographically at different... locations. With the increase in internet bandwidth, clients can communicate with the nodes in real time. This makes a distributed storage system most suitable for large scale data storage, retrieval and search. We implement the distributed storage system...

Kanjani, Khushboo

2009-05-15T23:59:59.000Z

337

Initiation propagation and termination of elastodynamic ruptures associated with segmentation of faults and shaking  

E-Print Network [OSTI]

Initiation propagation and termination of elastodynamic ruptures associated with segmentation the initiation, propagation, and termination of ruptures and their relationship to fault geometry and shaking of terminations near fault ends; and persistent propagation directivity effects. Taking advantage of long

Shaw, Bruce E.

338

E-Print Network 3.0 - active fault isolation Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and those exhibited by much smaller (L 0.15-2 km) more isolated faults... Post-yield fracture mechanics models for the growth of an isolated fault predict a linear...

339

E-Print Network 3.0 - analog fault simulation Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sciences 65 Channel flow and the development of parallel-dipping normal faults Thorsten J. Nagel1 Summary: -dipping normal faults we carried out a series of numerical experiments...

340

Characterization of the structure of faults in the Eocene Carrizo Formation near Gause, Milam County, Texas  

E-Print Network [OSTI]

-scale graben accommodating NW-SE extension. The Carrizo Fm. consists primarily of friable to weakly lithified quartz sandstones with several horizons with interbedded siltstones and shales. Five faults and fault zones occur in the quarry with displacements...

Yilmaz, Ramazan

2012-06-07T23:59:59.000Z

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Slip on ridge transform faults : insights from earthquakes and laboratory experiments  

E-Print Network [OSTI]

The relatively simple tectonic environment of mid-ocean ridge transform fault (RTF) seismicity provides a unique opportunity for investigation of earthquake and faulting processes. We develop a scaling model that is complete ...

Boettcher, Margaret S

2005-01-01T23:59:59.000Z

342

A methodology for experimentally verifying simulation models for distribution transformer internal faults  

E-Print Network [OSTI]

Internal winding faults comprise 70-80% of modem transformer breakdown. In this era of deregulation, this phenomenon is likely to increase since loading transformers to their optimum capacity is becoming normal practice. These internal faults result...

Palmer-Buckle, Peter

1999-01-01T23:59:59.000Z

343

Locating an active fault zone in Coso geothermal field by analyzing...  

Open Energy Info (EERE)

production and injection drilling, since an active fault zone often acts as a fracture-extensive low-velocity wave guide to seismic waves. We have located an active fault...

344

The effect of fault relayand clay smearing on groundwater flow patterns in the Lower Rhine  

E-Print Network [OSTI]

in the unconsolidated sediments of the Lower Rhine Embayment. Hydraulic head maps show that many individual faults form unconsolidated sediments at shal- low depth is likely to be di¡erent from that of faults at depths where rocks

Bense, Victor

345

Paleoearthquakes of the past 30,000 years along the North Tehran Fault (Iran)  

E-Print Network [OSTI]

Paleoearthquakes of the past 30,000 years along the North Tehran Fault (Iran) J.-F. Ritz,1 H. Ghorashi, and A. Saidi (2012), Paleoearthquakes of the past 30,000 years along the North Tehran Fault (Iran

346

Thermo-and hydro-mechanical processes along faults during rapid slip  

E-Print Network [OSTI]

Thermo- and hydro-mechanical processes along faults during rapid slip James R. Rice & Eric M micro-contacts, and (2) Thermal pressurization of fault-zone pore fluid. Both have characteristics which

Dunham, Eric M.

347

Tarmat behavior calculated for reservoir with sealing fault  

SciTech Connect (OSTI)

The Minagish Oolite oil reservoir in Kuwait is one of many Middle East reservoirs characterized by the presence of a tarmat (heavy to tar-like crude) at the oil-water contact. Since a waterflood project is planned for the Minagish Oolite, which contains a radial pattern of faults, a study was made to consider tarmat behavior upon water injection below it when the injection well is located near a sealing fault. The study resulted in a technique to predict the time of tarmat breakdown, response time at the nearest observation well, and differential pressure at the tarmat anywhere in the reservoir.

Osman, M.E.S.

1986-08-01T23:59:59.000Z

348

Fault-Tolerant Quantum Computation via Exchange interactions  

E-Print Network [OSTI]

Quantum computation can be performed by encoding logical qubits into the states of two or more physical qubits, and controlling a single effective exchange interaction and possibly a global magnetic field. This "encoded universality" paradigm offers potential simplifications in quantum computer design since it does away with the need to perform single-qubit rotations. Here we show that encoded universality schemes can be combined with quantum error correction. In particular, we show explicitly how to perform fault-tolerant leakage correction, thus overcoming the main obstacle to fault-tolerant encoded universality.

M. Mohseni; D. A. Lidar

2004-06-25T23:59:59.000Z

349

Robust services in dynamic systems  

E-Print Network [OSTI]

Our growing reliance on online services accessible on the Internet demands highly- available systems that work correctly without interruption. This thesis extends previous work on Byzantine-fault-tolerant replication to ...

Rodrigues, Rodrigo Seromenho Miragaia, 1975-

2005-01-01T23:59:59.000Z

350

Dynamic rupture through a branched fault2 configuration at Yucca Mountain and resulting3  

E-Print Network [OSTI]

Dynamic rupture through a branched fault2 configuration at Yucca Mountain and resulting3 ground analyses. This is motivated by the normal faults in the vicinity10 of Yucca Mountain, NV, a potential site fault12 located approximately 1 km west of the crest of Yucca Mountain, is the13 most active

Dmowska, Renata

351

Bearing Fault Detection in DFIG-Based Wind Turbines Using the First Intrinsic Mode Function  

E-Print Network [OSTI]

Bearing Fault Detection in DFIG-Based Wind Turbines Using the First Intrinsic Mode Function Y for bearing fault detection in DFIG-based wind turbines. The proposed method uses the first Intrinsic Mode Terms--Wind turbine, Doubly Fed Induction Generator (DFIG), fault detection, bearings, signal processing

Boyer, Edmond

352

IPR: In-Place Reconfiguration for FPGA Fault Tolerance and Rupak Majumdar2  

E-Print Network [OSTI]

IPR: In-Place Reconfiguration for FPGA Fault Tolerance Zhe Feng1 , Yu Hu1 , Lei He1 and Rupak Angeles ABSTRACT We describe In-Place Reconfiguration (IPR) for LUT-based FPGAs, an algorithm the propagation of faults seen at a pair of comple- mentary inputs. Based on IPR, we develop a fault

He, Lei

353

Performance of Graceful Degradation for Cache Faults Hyunjin Lee Sangyeun Cho Bruce R. Childers  

E-Print Network [OSTI]

Performance of Graceful Degradation for Cache Faults Hyunjin Lee Sangyeun Cho Bruce R. Childers to thermal hot spots) and may man- ifest themselves as operational faults at the micro- Bruce Childers that is dependent on the fault and the frequency of access to an address that would normally be held in the disabled

Cho, Sangyeun

354

Shallow soil CO2 flow along the San Andreas and Calaveras Faults, California  

E-Print Network [OSTI]

Shallow soil CO2 flow along the San Andreas and Calaveras Faults, California J. L. Lewicki,1,2 W. C soil CO2 survey along the San Andreas fault (SAF) in Parkfield, and the Calaveras fault (CF) in Hollister, California, in the context of spatial and temporal variability, origin, and transport of CO2

Hilley, George

355

Yield Modeling and Analysis of a Clockless Asynchronous Wave Pipeline with Pulse Faults  

E-Print Network [OSTI]

Yield Modeling and Analysis of a Clockless Asynchronous Wave Pipeline with Pulse Faults T. Feng fault model and its modeling and analysis methods in a clockless asynchronous wave pipeline fault rate model for establishing a sound theoretical foundation for clockless wave pipeline design

Ayers, Joseph

356

Acoustic Emission, Cylinder Pressure and Vibration: A Multisensor Approach to Robust Fault Diagnosis \\Lambda  

E-Print Network [OSTI]

of a diesel engine and 4 fault conditions, Artificial Neural Nets based on data from any one of these three and challenging task for Artificial Neural Nets (ANNs) is the on­line fault dia­ gnosis of a diesel engine. One way of meeting this challenge is to physically induce faults in a diesel engine, to collect data

Sharkey, Amanda

357

Mineralogical characterization of protolith and fault rocks from the SAFOD Main Hole  

E-Print Network [OSTI]

Mineralogical characterization of protolith and fault rocks from the SAFOD Main Hole John G. Solum influence is not yet fully known. Faults containing these mineralogical phases are prime candidates), Mineralogical characterization of protolith and fault rocks from the SAFOD Main Hole, Geophys. Res. Lett., 33, L

358

In:Safeprocess'09, 7th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes, Barcelona, 2009. ISBN: 978-3-902661-46-3  

E-Print Network [OSTI]

Processes, Barcelona, 2009. ISBN: 978-3-902661-46-3 Post-mortem Diagnosis of Bottling Plants Based-based system that performs post-mortem fault localization of food packaging plants and, more specifically, bottling plants based on recorded data. In this project, we need to cope with non-negligible transportation

Cengarle, María Victoria

359

Creating dynamic equivalent PV circuit models with impedance spectroscopy for arc-fault modeling.  

SciTech Connect (OSTI)

Article 690.11 in the 2011 National Electrical Code{reg_sign} (NEC{reg_sign}) requires new photovoltaic (PV) systems on or penetrating a building to include a listed arc fault protection device. Currently there is little experimental or empirical research into the behavior of the arcing frequencies through PV components despite the potential for modules and other PV components to filter or attenuate arcing signatures that could render the arc detector ineffective. To model AC arcing signal propagation along PV strings, the well-studied DC diode models were found to inadequately capture the behavior of high frequency arcing signals. Instead dynamic equivalent circuit models of PV modules were required to describe the impedance for alternating currents in modules. The nonlinearities present in PV cells resulting from irradiance, temperature, frequency, and bias voltage variations make modeling these systems challenging. Linearized dynamic equivalent circuits were created for multiple PV module manufacturers and module technologies. The equivalent resistances and capacitances for the modules were determined using impedance spectroscopy with no bias voltage and no irradiance. The equivalent circuit model was employed to evaluate modules having irradiance conditions that could not be measured directly with the instrumentation. Although there was a wide range of circuit component values, the complex impedance model does not predict filtering of arc fault frequencies in PV strings for any irradiance level. Experimental results with no irradiance agree with the model and show nearly no attenuation for 1 Hz to 100 kHz input frequencies.

Johnson, Jay Dean; Kuszmaul, Scott S.; Strauch, Jason E.; Schoenwald, David Alan

2011-06-01T23:59:59.000Z

360

Development and Application of Nonlinear PCA for Fault  

E-Print Network [OSTI]

Development and Application of Nonlinear PCA for Fault Diagnosis in Internal Combustion Engines Uwe to an Internal Combustion Engine · Conclusions and Future Challenges #12;Slide 3 Uwe Kruger Development Kruger School of Electronics, Electrical Engineering & Computer Science Ashby Building Stranmillis Road

Gorban, Alexander N.

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Statistical Approaches to Fault Analysis in Multivariate Process Control  

E-Print Network [OSTI]

Statistical Approaches to Fault Analysis in Multivariate Process Control Richard D. De Veaux Lyle H Abstract After a brief review of some statistical approaches to multivariate process control, we present analysis or partial least squares to limit the number of latent variables to study. While using historical

Ungar, Lyle H.

362

Influence of plastic deformation on bimaterial fault rupture directivity  

E-Print Network [OSTI]

Influence of plastic deformation on bimaterial fault rupture directivity Nora DeDontney,1 Elizabeth of the role of the stress state on the distribution of plastic deformation and the direction of preferred in determining the location of plastic deformation. For different orientations, plastic deformation can

Dmowska, Renata

363

On Fault Coverage of Tests for Finite State Specifications  

E-Print Network [OSTI]

On Fault Coverage of Tests for Finite State Specifications A. Petrenko and G. v. Bochmann-Ville, Montréal (Québec), H3C 3J7, Canada Abstract Testing is a trade-off between increased confidence in the correctness of the implementation under test and constraints on the amount of time and effort that can

von Bochmann, Gregor

364

Fault Detection Effectiveness of Spathic Test Data Jane Huffman Hayes  

E-Print Network [OSTI]

Fault Detection Effectiveness of Spathic Test Data Jane Huffman Hayes Computer Science Department This paper presents an approach for generating test data for unit-level, and possibly integration-level, testing based on sampling over intervals of the input probability distribution, i.e., one that has been

Hayes, Jane E.

365

Motion and evolution of the Chaochou Fault, Southern Taiwan  

E-Print Network [OSTI]

has been called the Chuchi Transfer Fault Zone (Lacombe et al., 2001). This boundary represents a major change in the character of seismicity in Taiwan. Although the nature of this boundary is not known, it may represent the southern extent of direct...

Hassler, Lauren E.

2005-11-01T23:59:59.000Z

366

Fault-tolerant architecture for quantum computation using electrically controlled  

E-Print Network [OSTI]

ARTICLES Fault-tolerant architecture for quantum computation using electrically controlled an architecture for quantum computation using electrically controlled semiconductor spins by extending the Loss in the solid state. Here, we develop a scalable architecture for solid-state quantum computation based

Loss, Daniel

367

High voltage fault current limiter having immersed phase coils  

DOE Patents [OSTI]

A fault current limiter including: a ferromagnetic circuit formed from a ferromagnetic material and including at least a first limb, and a second limb; a saturation mechanism surrounding a limb for magnetically saturating the ferromagnetic material; a phase coil wound around a second limb; a dielectric fluid surrounding the phase coil; a gaseous atmosphere surrounding the saturation mechanism.

Darmann, Francis Anthony

2014-04-22T23:59:59.000Z

368

Module Placement for Fault-Tolerant Microfluidics-Based Biochips  

E-Print Network [OSTI]

Module Placement for Fault-Tolerant Microfluidics-Based Biochips FEI SU and KRISHNENDU CHAKRABARTY Duke University Microfluidics-based biochips are soon expected to revolutionize clinical diagnosis, DNA sequencing, and other laboratory procedures involving molecular biology. Most microfluidic biochips today

Chakrabarty, Krishnendu

369

Active Probing Approach for Fault Localization in Computer Networks*  

E-Print Network [OSTI]

to develop tools for performing fault localization. We discuss various design issues involved and propose architecture for building such a tool. We describe an algorithm for probe set selection for problem detection a wide range of activities involving network design and operation [7, 9, 17, 18]. Network monitoring can

Sethi, Adarshpal

370

Real Time Control Design for Mobile Robot Fault Tolerant Control.  

E-Print Network [OSTI]

Mobile Robot. Cristian Axenie Automation and Industrial Informatics Department Razvan Solea, Lecturer, Ph-time distributed control application with fault tolerance capabilities for differential wheeled mobile robots mobile robot the author has been able to develop a hierarchical software application that minimizes costs

Kuehnlenz, Kolja

371

Defects and Faults in Quantum Cellular Automata at Nano Scale  

E-Print Network [OSTI]

Defects and Faults in Quantum Cellular Automata at Nano Scale Mehdi Baradaran Tahoori, Mariam considerable research on quantum dot cellular automata (QCA) as a new computing scheme in the nano, quantum dot cellular automata (QCA) not only gives a solution at nano scale, but also it offers a new

372

Proceedings of the 18th Fault-Tolerant Computing Symposium  

E-Print Network [OSTI]

Proceedings of the 18th Fault-Tolerant Computing Symposium Tokyo, Japan, pp. 234-239, June 1988 performed on this erroneous information are ``undone'' using a hardware mechanism for fast rollback of a few and confine the damage caused by the error to the failed module, it is often necessary to check the outputs

Tamir, Yuval

373

This document contains 3087 words. FAULT-TOLERANT COMPUTING  

E-Print Network [OSTI]

or physical damage. An extensive methodology has been developed in this field over the past thirty years the annual IEEE International Symposium on Fault-Tolerant Computing (FTCS) and the papers in its Digests with protective redundancy so that, if the module fails, others can assume its function. Special mechanisms

Rennels, David A.

374

Fault prediction in aircraft engines using Self-Organizing Maps  

E-Print Network [OSTI]

Fault prediction in aircraft engines using Self- Organizing Maps Marie Cottrell1 , Patrice Gaubert1. Aircraft engines are designed to be used during several tens of years. Their maintenance is a challenging and costly task, for obvious security reasons. The goal is to ensure a proper operation of the engines

Paris-Sud XI, Université de

375

How to Generate Fault Trees from Causal In uence Diagrams  

E-Print Network [OSTI]

. 1 #12; Hydrocarbon in Steam in Catalyst in Vent 1 Vent 2 Product out Tank Pressure controller Handbook [VGRH81], written by some of the original developers of fault tree methodology in the nuclear; Explosion Pressure too high PRV 1 does not open PRV 2 does not open Valve failure Operator does not know

Ladkin, Peter B.

376

Permanent Magnets Synchronous Machines Faults Detection and Identification  

E-Print Network [OSTI]

for permanent magnet synchronous machines (PMSM). Two main faults occurring on these machines are identified of the PMSM is devel- oped and simulated using Matlab Simulink. The model enables simulating nominal and faulty PMSM behavior, with several stages of degradation, and is supported by tests results. Specific

Paris-Sud XI, Université de

377

Formal Fault Tree Analysis: Practical Experiences  

E-Print Network [OSTI]

sytsems and transportation systems. In this paper we present the formalization of one of the most wide is rising (e.g. the recent accidents in china's chemical plants or the german ICE acci- dent at Eschede of [14]. Verification was done with the KIV system [2]. This case study can also be seen as a guideline

Paris-Sud XI, Université de

378

DIPLOMARBEIT Fault Injection for Diagnosis and Maintenance  

E-Print Network [OSTI]

In the automotive industry more and more electronics is used to improve passen- ger comfort, vehicle safety of electronic systems in modern cars. The automotive industry is about to deploy computer systems not only, and fuel economy. The electronic components are distribu- ted all over the vehicle and interconnected

379

E-Print Network 3.0 - autonomous multi-sensor micro-system Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

alongside open... accreditation for use of forensic tools including the market-leading Micro Systemation... in distributed computing, such as fault tolerance and policy driven...

380

Thrust faulting in Temblor Range, Kern County, California  

SciTech Connect (OSTI)

Surface and subsurface studies confirm the presence of overthrusting in the Temblor Range between Gonyer Canyon and Recruit Pass. In the subsurface, three wells have penetrated the Cree fault, the Hudbay Cree' No. 1 (7,300 ft), the Frantzen Oil Company Cree' No. 1 (5,865 ft) and the Arco Cree Fee' 1A well (5,915 ft). Below the fault, 25 to 35{degree} of westerly dips on the west flank of the sub-thrust Phelps anticline are encountered. The McDonald section below the fault is comprised of siliceous fractured shale which contains live oil and gas showings. A drill-stem test of the interval from 8,247 to 8,510 ft in the Frantzen well resulted in a recovery of 1,200 ft clean 34{degree} oil and 40 MCF per day gas. The shut in pressure was 3,430 lb, which is a normal hydrostatic pressure common to the producing structures in the southern San Joaquin Valley. The equivalent of this interval has produced over 7,000 bbl of oil in the Arco Cree' 1A well. The Arco Cree Fee' No. 1A well crossed the axis of the Phelps Anticline as indicated by good dipmeter and bottomed in Lower Zemorrian at 14,512 ft total depth. This well was not drilled deep enough to reach the Point of Rocks Sand and did not test the gas showings in the lower Miocene section. In the Gonyer Canyon area, subsurface evidence indicated conditions are similar to those in the Cree area because a large structure is present below a thrust fault. It is believed that significant accumulations will be found beneath thrust faults in the eastern part of the Temblor Range where conditions are similar to those that were instrumental in forming fields such as the Elk Hills, B. V. Hills, Belgian Anticline and others.

Simonson, R.R.

1991-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Controlled-source electromagnetic mapping of a faulted sandstone aquifer in central Texas  

E-Print Network [OSTI]

across a fault (Randolph 1991), due to permeability reduction in the deformation zone, but in some cases can be enhanced along the fault slip plane (Antonellini and Aydin 1994), i. e. parallel to the fault. A knowledge of subsurface fault distributions... the electromagnetic response. Seaborne et al. (1979) interpreted the anomalies as the edge effect of thin horizontal sheets of low resistivity beds, as opposed to the high conductivity response of the material in a fault zone. In a similar study, Hazell er al...

Gorman, Erin Margaret

2012-06-07T23:59:59.000Z

382

Development of Asset Fault Signatures for Prognostic and Health Management in the Nuclear Industry  

SciTech Connect (OSTI)

Proactive online monitoring in the nuclear industry is being explored using the Electric Power Research Institute’s Fleet-Wide Prognostic and Health Management (FW-PHM) Suite software. The FW-PHM Suite is a set of web-based diagnostic and prognostic tools and databases that serves as an integrated health monitoring architecture. The FW-PHM Suite has four main modules: Diagnostic Advisor, Asset Fault Signature (AFS) Database, Remaining Useful Life Advisor, and Remaining Useful Life Database. This paper focuses on development of asset fault signatures to assess the health status of generator step-up generators and emergency diesel generators in nuclear power plants. Asset fault signatures describe the distinctive features based on technical examinations that can be used to detect a specific fault type. At the most basic level, fault signatures are comprised of an asset type, a fault type, and a set of one or more fault features (symptoms) that are indicative of the specified fault. The AFS Database is populated with asset fault signatures via a content development exercise that is based on the results of intensive technical research and on the knowledge and experience of technical experts. The developed fault signatures capture this knowledge and implement it in a standardized approach, thereby streamlining the diagnostic and prognostic process. This will support the automation of proactive online monitoring techniques in nuclear power plants to diagnose incipient faults, perform proactive maintenance, and estimate the remaining useful life of assets.

Vivek Agarwal; Nancy J. Lybeck; Randall Bickford; Richard Rusaw

2014-06-01T23:59:59.000Z

383

Analysis of Fault Permeability Using Mapping and Flow Modeling, Hickory Sandstone Aquifer, Central Texas  

SciTech Connect (OSTI)

Reservoir compartments, typical targets for infill well locations, are commonly created by faults that may reduce permeability. A narrow fault may consist of a complex assemblage of deformation elements that result in spatially variable and anisotropic permeabilities. We report on the permeability structure of a km-scale fault sampled through drilling a faulted siliciclastic aquifer in central Texas. Probe and whole-core permeabilities, serial CAT scans, and textural and structural data from the selected core samples are used to understand permeability structure of fault zones and develop predictive models of fault zone permeability. Using numerical flow simulation, it is possible to predict permeability anisotropy associated with faults and evaluate the effect of individual deformation elements in the overall permeability tensor. We found relationships between the permeability of the host rock and those of the highly deformed (HD) fault-elements according to the fault throw. The lateral continuity and predictable permeability of the HD fault elements enhance capability for estimating the effects of subseismic faulting on fluid flow in low-shale reservoirs.

Nieto Camargo, Jorge E., E-mail: jorge.nietocamargo@aramco.com; Jensen, Jerry L., E-mail: jjensen@ucalgary.ca [University of Calgary, Department of Chemical and Petroleum Engineering (Canada)

2012-09-15T23:59:59.000Z

384

Electrical and thermal finite element modeling of arc faults in photovoltaic bypass diodes.  

SciTech Connect (OSTI)

Arc faults in photovoltaic (PV) modules have caused multiple rooftop fires. The arc generates a high-temperature plasma that ignites surrounding materials and subsequently spreads the fire to the building structure. While there are many possible locations in PV systems and PV modules where arcs could initiate, bypass diodes have been suspected of triggering arc faults in some modules. In order to understand the electrical and thermal phenomena associated with these events, a finite element model of a busbar and diode was created. Thermoelectrical simulations found Joule and internal diode heating from normal operation would not normally cause bypass diode or solder failures. However, if corrosion increased the contact resistance in the solder connection between the busbar and the diode leads, enough voltage potentially would be established to arc across micron-scale electrode gaps. Lastly, an analytical arc radiation model based on observed data was employed to predicted polymer ignition times. The model predicted polymer materials in the adjacent area of the diode and junction box ignite in less than 0.1 seconds.

Bower, Ward Isaac; Quintana, Michael A.; Johnson, Jay

2012-01-01T23:59:59.000Z

385

Mechanical properties and fabric of the Punchbowl fault zone, California  

E-Print Network [OSTI]

) identification of source rocks and sediment transport directions for sedimentary rock units (Larsen, 1959; Pelka, 1971; Robinson and Woodburne, 1971; Woodburne and Golz, 1972; Farley and Ehlig, 1977; Barrows, 1979), and (3) regional mapping and correlation... at Santa Barbara Chairman of Advisory Committee: John M. Logan Field observations and experimental rock deformation techniques are used to characterize the deformational fabric and relative mechanical properties of a portion of the Punchbowl fault zone...

Chester, Frederick Michael

1983-01-01T23:59:59.000Z

386

Cockade breccia: Product of mineralisation along dilational faults  

E-Print Network [OSTI]

. Geological Society of America, Washington, D.C. 548 Bateman, A.M., 1924. Angular inclusions and replacement deposits. Economic Geology 19, 504–549 520. 550 Beck, R., 1903. Lehre von den Erzlagerstätten. 2nd Ed., Gebrüder Bornträger, Berlin. 551 Bélissont... Date: 6 June 2014 Revised Date: 29 August 2014 Accepted Date: 2 September 2014 Please cite this article as: Frenzel, M., Woodcock, N.H., Cockade breccia: Product of mineralisation along dilational faults, Journal of Structural Geology (2014), doi: 10...

Frenzel, Max; Woodcock, Nigel H.

2014-01-01T23:59:59.000Z

387

Gravity and fault structures, Long Valley caldera, California  

SciTech Connect (OSTI)

The main and catastrophic phase of eruption in Long Valley occurred 0.73 m.y. ago with the eruption of over 600 km/sup 3/ of rhyolitic magma. Subsequent collapse of the roof rocks produced a caldera which is now elliptical in shape, 32 km east-west by 17 km north-south. The caldera, like other large Quarternary silicic ash-flow volcanoes that have been studied by various workers, has a nearly coincident Bouguer gravity low. Earlier interpretations of the gravity anomaly have attributed the entire anomaly to lower density rocks filling the collapsed structure. However, on the basis of many additional gravity stations and supporting subsurface data from several new holes, a much more complex and accurate picture has emerged of caldera structure. From a three-dimensional inversion of the residual Bouguer gravity data we can resolve discontinuities that seem to correlate with extensions of pre-caldera faults into the caldera and faults associated with the ring fracture. Some of these faults are believed related to the present-day hydrothermal upflow zone and the zone of youngest volcanic activity within the caldera.

Carle, S.F.; Goldstein, N.E.

1987-07-01T23:59:59.000Z

388

Superconducting fault current-limiter with variable shunt impedance  

DOE Patents [OSTI]

A superconducting fault current-limiter is provided, including a superconducting element configured to resistively or inductively limit a fault current, and one or more variable-impedance shunts electrically coupled in parallel with the superconducting element. The variable-impedance shunt(s) is configured to present a first impedance during a superconducting state of the superconducting element and a second impedance during a normal resistive state of the superconducting element. The superconducting element transitions from the superconducting state to the normal resistive state responsive to the fault current, and responsive thereto, the variable-impedance shunt(s) transitions from the first to the second impedance. The second impedance of the variable-impedance shunt(s) is a lower impedance than the first impedance, which facilitates current flow through the variable-impedance shunt(s) during a recovery transition of the superconducting element from the normal resistive state to the superconducting state, and thus, facilitates recovery of the superconducting element under load.

Llambes, Juan Carlos H; Xiong, Xuming

2013-11-19T23:59:59.000Z

389

Fuzzy logic based operated device identification in power distribution systems  

E-Print Network [OSTI]

of an operated device identification algorithm to be used as one of four modules in an automated modular scheme for fault section estimation on radial distribution systems. This algorithm will be executed in tandem with the other fault location modules that form...

Manivannan, Karthick Muthu

2002-01-01T23:59:59.000Z

390

A High-Resolution Aeromagnetic Survey to Identify Buried Faults at Dixie Valley, Nevada  

SciTech Connect (OSTI)

Preliminary results from a high-resolution aeromagnetic survey (200m line spacing) acquired in Dixie Valley early in 2002 provide confirmation of intra-basin faulting based on subtle surface indications. In addition the data allow identification of the locations and trends of many faults that have not been recognized at the surface, and provide a picture of intrabasin faulting patterns not possible using other techniques. The data reveal a suite of northeasterly-trending curving and branching faults that surround a relatively coherent block in the area of Humboldt Salt Marsh, the deepest part of the basin. The producing reservoir occurs at the north end of this coherent block, where rampart faults from the northwest side of the valley merge with anthithetic faults from the central and southeast parts of the valley.

Smith, Richard Paul; Grauch, V. J. S.; Blackwell, David D.

2002-09-01T23:59:59.000Z

391

Continuous Energy Management of the HVAC&R System in an Office Building System Operation and Energy Consumption for the Eight Years after Building Completion  

E-Print Network [OSTI]

The authors continuously studied the energy consumption of a heating, ventilating, air- conditioning and refrigerating (HVAC&R) system in an office for the operation of the system in terms of its expected performance. A fault in the system control...

Akashi, Y.; Shinozaki, M.; Kusuda, R.; Ito, S.

2006-01-01T23:59:59.000Z

392

Influence of faults on groundwater flow and transport at YuccaMountain, Nevada  

SciTech Connect (OSTI)

Numerical simulations of groundwater flow at Yucca Mountain, Nevada are used to investigate how faults influence groundwater flow pathways and regional-scale macrodispersion. The 3-D model has a unique grid block discretization that facilitates the accurate representation of the complex geologic structure present in faulted formations. Each hydrogeologic layer is discretized into a single layer of irregular and dipping grid blocks, and faults are discretized such that they are laterally continuous and varied in displacement varies along strike. In addition, the presence of altered fault zones is explicitly modeled, as appropriate. Simulations show that upward head gradients can be readily explained by the geometry of hydrogeologic layers, the variability of layer permeabilities, and the presence of permeable fault zones or faults with displacement only, not necessarily by upwelling from a deep aquifer. Large-scale macrodispersion results from the vertical and lateral diversion of flow near the contact of high- and low-permeability layers at faults, and from upward flow within high-permeability fault zones. Conversely, large-scale channeling can occur as a result of groundwater flow into areas with minimal fault displacement. Contaminants originating at the water table can flow in a direction significantly different from that of the water table gradient, and isolated zones of contaminants can occur at the water table downgradient. By conducting both 2-D and 3-D simulations, we show that the 2-D cross-sectional models traditionally used to examine flow in faulted formations may not be appropriate. In addition, the influence of a particular type of fault cannot be generalized; depending on the location where contaminants enter the saturated zone, faults may either enhance or inhibit vertical dispersion.

Cohen, Andrew J.B.; Sitar, Nicholas

1999-10-07T23:59:59.000Z

393

Method of detecting the direction of arcing faults on power distribution feeders  

E-Print Network [OSTI]

harmonic symmetrical current components under high impedance arcing faults hss been proposed by Raiser of Power Technologies Inc [I]. Other methods using even, odd, and "in-between" harmonics (with respect to the 60 Hz fundamental frequency) have been... and the second based on the "in-between" harmonic frequency current correlation to the voltage of the faulted feeder [8]. Benner has proposed the correlation of voltage to the difference in line current, caused due to an arcing high impedance fault...

Fernando, W. Anand Krisantha

1992-01-01T23:59:59.000Z

394

The bridge-type fault current controller--a new facts controller  

SciTech Connect (OSTI)

The operation of a novel current controller, which can also function as a fault current limiter and as a solid-state ac circuit breaker, is presented. The controller, which consists of a thyristor bridge, an inductor, and an optional bias power supply, is installed in series with the voltage source and the load, For load current values smaller than a preset value, the inductor of the current controller presents no impedance to the ac current flow. For values higher than the preset current value, the inductor is switched automatically into the ac circuit and limits the amount of current flow. Theoretical results in the form of circuit simulations and experimental results with a single-phase unit, operating on a 13.7 kV three-phase system with peak short-circuit currents of 3140 Arms, are presented.

Boenig, Heinrich J.; Mielke, C. H. (Charles H.); Burley, B. L. (Burt L.); Chen, Hong; Waynert, J. A. (Joseph A.); Willis, J. O. (Jeffrey O.)

2002-01-01T23:59:59.000Z

395

SciTech Connect: Development of Asset Fault Signatures for Prognostic...  

Office of Scientific and Technical Information (OSTI)

signatures to assess the health status of generator step-up generators and emergency diesel generators in nuclear power plants. Asset fault signatures describe the distinctive...

396

E-Print Network 3.0 - adaptive fault detection Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

or fault-free path. Therefore, the issue... present a technique to enhance minimal, fully-adaptive routing al- gorithms ... Source: Boppana, Rajendra V. - Department of Computer...

397

Microsoft Word - GroundFaultSAND-rev7-JJ.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

3459 Unlimited Release Printed June 2013 Photovoltaic Ground Fault and Blind Spot Electrical Simulations Jack D. Flicker Jay Johnson Prepared by Sandia National Laboratories...

398

Wind Power Plant Enhancement with a Fault-Current Limiter: Preprint  

SciTech Connect (OSTI)

This paper investigates the capability of a saturable core fault-current limiter to limit the short circuit current of different types of wind turbine generators.

Muljadi, E.; Gevorgian, V.; DeLaRosa, F.

2011-03-01T23:59:59.000Z

399

E-Print Network 3.0 - achieve fault tolerance Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

3 This document contains 3087 words. FAULT-TOLERANT COMPUTING Summary: -the-shelf computers and achieved voting and reconfiguration primarily through software. The second...

400

Fault Tolerance Techniques for Wireless Ad Hoc Sensor Networks Farinaz Koushanfar  

E-Print Network [OSTI]

poten- tial to provide inexpensive and pervasive bridge between physical and computational worlds and actuators that have significantly higher fault rates than the traditional semiconductor integrated circuits

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Finite-difference modeling of faults and fractures Richard T. Coates ...  

E-Print Network [OSTI]

For the purposes of seismic propagation, a slip fault may be regarded as a surface across which the dis- placement caused by a seismic wave is discontinuous.

2010-06-09T23:59:59.000Z

402

E-Print Network 3.0 - atera fault central Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

The Netherlands ABSTRACT Faults strongly impact groundwater ow... in the unconsolidated sediments of the Lower Rhine Embayment. Hydraulic head maps show that many...

403

Fault-Based Attack of RSA Authentication Andrea Pellegrini, Valeria Bertacco and Todd Austin  

E-Print Network [OSTI]

a straightforward design architecture that en- tails a small silicon footprint and low-power profile. Our research enviromental manipulations. Our fault-based attack can be succ

Austin, Todd M.

404

E-Print Network 3.0 - aircraft fault detection Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the next 3 years, we cannot use... aircrafts to detect faults on our new ones. Fuzzy logic converts expert knowledge (usually, rules... ), expressed in natural language, into...

405

E-Print Network 3.0 - automatical adaptive fault Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and Information Sciences 50 FUSE -A HARDWARE ACCELERATED HDL FAULT INJECTION TOOL Marcus Jeitler, Martin Delvai Summary: the Hpe desk environment has 12;Fig. 3. FuSE...

406

Design, Test and Demonstration of Saturable Reactor High-Temperature Superconductor Fault Current Limiters  

SciTech Connect (OSTI)

Zenergy Power has successfully designed, built, tested, and installed in the US electrical grid a saturable reactor Fault Current Limiter. Beginning in 2007, first as SC Power Systems and from 2008 as Zenergy Power, Inc., ZP used DOE matching grant and ARRA funds to help refine the design of the saturated reactor fault current limiter. ZP ultimately perfected the design of the saturated reactor FCL to the point that ZP could reliably design a suitable FCL for most utility applications. Beginning with a very basic FCL design using 1G HTS for a coil housed in a LN2 cryostat for the DC bias magnet, the technology progressed to a commercial system that was offered for sale internationally. Substantial progress was made in two areas. First, the cryogenics cooling system progressed from a sub-cooled liquid nitrogen container housing the HTS coils to cryostats utilizing dry conduction cooling and reaching temperatures down to less than 20 degrees K. Large, round cryostats with â??warm boreâ? diameters of 1.7 meters enabled the design of large tanks to hold the AC components. Second, the design of the AC part of the FCL was refined from a six legged â??spiderâ? design to a more compact and lighter design with better fault current limiting capability. Further refinement of the flux path and core shape led to an efficient saturated reactor design requiring less Ampere-turns to saturate the core. In conclusion, the development of the saturable reactor FCL led to a more efficient design not requiring HTS magnets and their associated peripheral equipment, which yielded a more economical product in line with the electric utility industry expectations. The original goal for the DOE funding of the ZP project â??Design, Test and Demonstration of Saturable Reactor High-Temperature Superconductor Fault Current Limitersâ? was to stimulate the HTS wire industry with, first 1G, then 2G, HTS wire applications. Over the approximately 5 years of ZPâ??s product development program, the amount of HTS wire employed per FCL and its cost as a percentage of the total FCL product content had not dropped substantially from an unsustainable level of more than 50% of the total cost of the FCL, nor had the availability increased (today the availability of 2G wire for commercial applications outside of specific partnerships with the leading 2G wire manufacturers is extremely limited). ZP had projected a very significant commercial potential for FCLs with higher performance and lower costs compared to the initial models built with 1G wire, which would come about from the widespread availability of low-cost, high-performance 2G HTS wire. The potential for 2G wires at greatly reduced performance-based prices compared to 1G HTS conductor held out the potential for the commercial production of FCLs at price and performance levels attractive to the utility industry. However, the price of HTS wire did not drop as expected and today the available quantities of 2G wire are limited, and the price is higher than the currently available supplies of 1G wire. The commercial option for ZP to provide a reliable and reasonably priced FCL to the utility industry is to employ conventional resistive conductor DC electromagnets to bias the FCL. Since the premise of the original funding was to stimulate the HTS wire industry and ZP concluded that copper-based magnets were more economical for the foreseeable future, DOE and ZP decided to mutually terminate the project.

Frank Darmann; Robert Lombaerde; Franco Moriconi; Albert Nelson

2011-10-31T23:59:59.000Z

407

System theoretic approach for determining causal factors of quality loss in complex system design  

E-Print Network [OSTI]

Identifying the factors that could lead to the loss of quality is difficult for large, complex systems. Traditional design methods such as Failure Modes and Effects Analysis (FMEA), Fault Tree Analysis (FTA), and Robust ...

Goerges, Stephanie L

2013-01-01T23:59:59.000Z

408

Solid-State Fault Current Limiter Development : Design and Testing Update of a 15kV SSCL Power Stack  

SciTech Connect (OSTI)

ABSTRACT The Solid-State Fault Current Limiter (SSCL) is a promising technology that can be applied to utility power delivery systems to address the problem of increasing fault currents associated with load growth. As demand continues to grow, more power is added to utility system either by increasing generator capacity or by adding distributed generators, resulting in higher available fault currents, often beyond the capabilities of the present infrastructure. The SSCL is power-electronics based equipment designed to work with the present utility system to address this problem. The SSCL monitors the line current and dynamically inserts additional impedance into the line in the event of a fault being detected. The SSCL is based on a modular design and can be configured for 5kV through 69kV systems at nominal current ratings of 1000A to 4000A. Results and Findings This report provides the final test results on the development of 15kV class SSCL single phase power stack. The scope of work included the design of the modular standard building block sub-assemblies, the design and manufacture of the power stack and the testing of the power stack for the key functional tests of continuous current capability and fault current limiting action. Challenges and Objectives Solid-State Current Limiter technology impacts a wide spectrum of utility engineering and operating personnel. It addresses the problems associated with load growth both at Transmission and Distribution class networks. The design concept is pioneering in terms of developing the most efficient and compact power electronics equipment for utility use. The initial test results of the standard building blocks are promising. The independent laboratory tests of the power stack are promising. However the complete 3 phase system needs rigorous testing for performance and reliability. Applications, Values, and Use The SSCL is an intelligent power-electronics device which is modular in design and can provide current limiting or current interrupting capabilities. It can be applied to variety of applications from distribution class to transmission class power delivery grids and networks. It can also be applied to single major commercial and industrial loads and distributed generator supplies. The active switching of devices can be further utilized for protection of substation transformers. The stress on the system can be reduced substantially improving the life of the power system. It minimizes the voltage sag by speedy elimination of heavy fault currents and promises to be an important element of the utility power system. DOE Perspective This development effort is now focused on a 15kV system. This project will help mitigate the challenges of increasing available fault current. DOE has made a major contribution in providing a cost effective SSCL designed to integrate seamlessly into the Transmission and Distribution networks of today and the future. Approach SSCL development program for a 69kV SSCL was initiated which included the use of the Super GTO advanced semiconductor device which won the 2007 R&D100 Award. In the beginning, steps were identified to accomplish the economically viable design of a 69kV class Solid State Current Limiter that is extremely reliable, cost effective, and compact enough to be applied in urban transmission. The prime thrust in design and development was to encompass the 1000A and the 3000A ratings and provide a modular design to cover the wide range of applications. The focus of the project was then shifted to a 15kV class SSCL. The specifications for the 15kV power stack are reviewed. The design changes integrated into the 15kV power stack are discussed. In this Technical Update the complete project is summarized followed by a detailed test report. The power stack independent high voltage laboratory test requirements and results are presented. Keywords Solid State Current Limiter, SSCL, Fault Current Limiter, Fault Current Controller, Power electronics controller, Intelligent power-electronics Device, IED

Dr. Ram Adapa; Mr. Dante Piccone

2012-04-30T23:59:59.000Z

409

A comparison of the characteristic currents method with IEC, ANSI/IEEE, and dynamic simulation procedures for fault calculations  

SciTech Connect (OSTI)

Comparisons of fault calculation procedures are presented in this paper. The primary method considered in this paper is the characteristic currents method. This calculation procedure has been discussed at length in previous work. It is the purpose of this work to present the extension of the previous work to the general case and compare results obtained using this method with results obtained with methods designed to follow recognized ANSI/IEEE and IEC Standards. Complete time-domain simulation is used as the basis for these comparisons. Sample calculations for a system containing multiple induction and synchronous machines are provided for demonstration purposes.

Halpin, S.M. [Mississippi State Univ., MS (United States). Dept. of Electrical and Computer Engineering; Parise, G. [Univ. of Rome La Sapienza (Italy). Electrical Engineering Dept.

1995-12-31T23:59:59.000Z

410

Waste Management Fault Tree Data Bank (WM): 1992 status report  

SciTech Connect (OSTI)

The Risk Assessment Methodology Group (RAM) of the Nuclear Process Safety Research Section (NPSR) maintains a compilation of incidents that have occurred in the Waste Management facilities. The Waste Management Fault Tree Data Bank (WM) contains more than 35,000 entries ranging from minor equipment malfunctions to incidents with significant potential for injury or contamination of personnel. This report documents the status of the WM data bank including: availability, training, source of data, search options, and usage, to which these data have been applied. Periodic updates to this memorandum are planned as additional data or applications are acquired.

Baughman, D.F.; Hang, P.; Townsend, C.S.

1993-08-30T23:59:59.000Z

411

Sandia National Laboratories: arc-fault circuit interrupter  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1development Sandia, NREL Release Wavearc-fault circuit interrupter Sandia Research on

412

Improving Distribution System Reliability Through Risk-base Doptimization of Fault Management and Improved Computer-based Fault Location  

E-Print Network [OSTI]

.  OPTIMIZED CREW DISPATCH ........................................................................... 26  6.1  Introduction ...................................................................................................... 26  6.2  Formulation of the crew... dispatch optimization ................................................ 27  6.3  Calculation of Pi and Ti .................................................................................... 27  6.4  Conclusion...

Dong, Yimai

2013-11-07T23:59:59.000Z

413

Abstract-This paper investigates four different short circuit fault conditions which can occur for an inverter-fed perma-  

E-Print Network [OSTI]

for an inverter-fed perma- nent magnet synchronous motor (PMSM) with buried mag- nets. The fault conditions Condition #... Inverter PM machine (at steady state) N Short circuit fault conditions of a buried PMSM

Jantsch, Axel

414

Algorithms for Green Buildings: Learning-Based Techniques for Energy Prediction and Fault Diagnosis  

E-Print Network [OSTI]

Algorithms for Green Buildings: Learning-Based Techniques for Energy Prediction and Fault Diagnosis on servers or to redistribute to lists, requires prior specific permission. #12;Algorithms for Green Buildings: Learning-Based Techniques for Energy Prediction and Fault Diagnosis Daniel Holcomb Wenchao Li

Seshia, Sanjit A.

415

Treanmission Line Fault Location using Interoperability and Integration of Data and Model  

E-Print Network [OSTI]

. The second type is a sparse measurement based fault location scheme using phasor measurements from different substations located in the vicinity where the fault has occurred and can be applied if the measurements are not available from any of the line ends...

Dutta, Papiya

2014-01-10T23:59:59.000Z

416

Fault Tolerant Photodiode and Photogate Active Pixel Sensors , Glenn H. Chapmana  

E-Print Network [OSTI]

Fault Tolerant Photodiode and Photogate Active Pixel Sensors Cory Junga , Glenn H. Chapmana, this design can correct for most defects allowing for higher production yields. Fault tolerant photodiode and photogate APS' were fabricated in 0.18-micron technology. Testing showed that the photodiode APS could

Chapman, Glenn H.

417

FAULT DETECTION AND STATE EVALUATION OF ROTOR BLADES Yuri Petryna, Andreas Knzel, Matthias Kannenberg  

E-Print Network [OSTI]

FAULT DETECTION AND STATE EVALUATION OF ROTOR BLADES Yuri Petryna, Andreas Künzel, Matthias an approach for cost-effective, serial integrity tests of rotor blades. At that, manufacturing faults shall be automatically detected, localized and assessed with respect to their impact on the integrity of rotor blades

Boyer, Edmond

418

nD-RAPID: a multidimensional scalable fault-tolerant optoelectronic  

E-Print Network [OSTI]

nD-RAPID: a multidimensional scalable fault-tolerant optoelectronic interconnection for high of faults. We propose a multidimen- sional optoelectronic architecture, nD-RAPID (reconfigurable, and latency [4­7]. In this paper, we propose a novel optoelectronic architecture nD-RAPID (n Dimen- sional

Louri, Ahmed

419

A Smart Algorithm for the Diagnosis of Short-Circuit Faults in a Photovoltaic Generator  

E-Print Network [OSTI]

A Smart Algorithm for the Diagnosis of Short-Circuit Faults in a Photovoltaic Generator Wail Rezgui observations distributed over classes is used for simulation purposes. Keywords--Photovoltaic generator, SVM, k-NN, short-circuit fault, smart classification, linear programming. NOMENCLATURE PV = Photovoltaic; SVM

Paris-Sud XI, Université de

420

A Regression Algorithm for the Smart Prognosis of a Reversed Polarity Fault in a Photovoltaic Generator  

E-Print Network [OSTI]

A Regression Algorithm for the Smart Prognosis of a Reversed Polarity Fault in a Photovoltaic database containing sample data is used for simulation purposes. Keywords--Photovoltaic generator, SVR, k-NNR, reversed polarity fault, diagnosis, prognosis. NOMENCLATURE PV = Photovoltaic; SVM = Support Vector

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Voltage grid support of DFIG wind turbines during grid faults Anca D. Hansen1  

E-Print Network [OSTI]

Voltage grid support of DFIG wind turbines during grid faults Anca D. Hansen1 , Gabriele Michalke2) wind turbines address primarily the design of DFIG wind turbine control with special focus on power strategy for DFIG wind turbines, which enhances the fault ride-through capability of DFIG wind turbines

422

PWM Inverter-Fed Induction Motor-Based Electrical Vehicles Fault-Tolerant Control  

E-Print Network [OSTI]

PWM Inverter-Fed Induction Motor-Based Electrical Vehicles Fault-Tolerant Control Bekheïra Tabbache proposes a fault-tolerant control scheme for PWM inverter-fed induction motor-based electric vehicles and simulations on an electric vehicle are carried-out using a European urban driving cycle to assess the FTC

Paris-Sud XI, Université de

423

Fault detection and isolation in aircraft gas turbine engines. Part 1: underlying concept  

E-Print Network [OSTI]

307 Fault detection and isolation in aircraft gas turbine engines. Part 1: underlying concept: aircraft propulsion, gas turbine engines, fault detection and isolation, statistical pattern recognition 1 INTRODUCTION Performance and reliability of aircraft gas turbine engines gradually deteriorate over the service

Ray, Asok

424

Exact Computation of Maximally Dominating Faults and Its Application to -Detection Tests  

E-Print Network [OSTI]

Exact Computation of Maximally Dominating Faults and Its Application to -Detection Tests Ilia, IN 47907, USA Abstract £ -detection test sets for stuck-at faults have been shown to be useful in detecting an important role in controlling the increase in the size of an £ -detection test set as £ is increased

Polian, Ilia

425

Robust Codes for Fault Attack Resistant Cryptographic Konrad J. Kulikowski, Mark G. Karpovsky, Alexander Taubin  

E-Print Network [OSTI]

Robust Codes for Fault Attack Resistant Cryptographic Hardware Konrad J. Kulikowski, Mark G algorithms are vulner- able to fault analysis attacks. To detect these attacks we propose an architec- ture by an attacker. Architectures based on these codes have fewer undetectable er- rors than linear codes

Karpovsky, Mark

426

Christiaan J.J. Paredis and Pradeep K. Khosla, ``Designing Fault Tolerant Manipulators: How Many Degreesoffreedom?''  

E-Print Network [OSTI]

Degrees­of­freedom?'' to appear in The International Journal of Robotics Research, 1996. Designing Fault design templates for spatial fault tolerant manipulators. In a second approach, both the Cartesian task in their robot designs (Wu et al. 1993). Reliability is also #12; 2 Christiaan J.J. Paredis and Pradeep K. Khosla

427

Can Fault Prediction Models and Metrics be Used for Vulnerability Prediction? Yonghee Shin and Laurie Williams  

E-Print Network [OSTI]

Can Fault Prediction Models and Metrics be Used for Vulnerability Prediction? Yonghee Shin to prioritize security inspection and testing efforts may be better served by a prediction model that indicates commonalities that may allow development teams to use traditional fault prediction models and metrics

Young, R. Michael

428

First-principles calculations of twin-boundary and stacking-fault energies in magnesium  

E-Print Network [OSTI]

First-principles calculations of twin-boundary and stacking-fault energies in magnesium Y. Wang and stacking faults in metal magnesium have been calculated using first-principles supercell approach. Four. Keywords: Magnesium; Interfaces; Twinning; First-principles calculation Magnesium alloys are increasingly

Chen, Long-Qing

429

Shallow seismic reflection profile of the Meers fault, Comanche County, Oklahoma  

E-Print Network [OSTI]

.J., The Meers fault tectonic activity in south- western Oklahoma, U. S. Nuclear Regulatory Commission, NUREG ICR-4852, 1-25, A1-A25, 1987. McLean, R., and Stearns, D.W., Fault analysis in the Wichita Mountains [Abs. ], AAPG Bull. 67, 511-512, 1983. Miller...

Myers, Paul B.; Miller, Richard D.; Steeples, Don W.

1987-07-01T23:59:59.000Z

430

DFIG Driven Wind Turbine Grid Fault-Tolerance Using High-Order Sliding Mode Control  

E-Print Network [OSTI]

DFIG Driven Wind Turbine Grid Fault-Tolerance Using High-Order Sliding Mode Control Mohamed fault-tolerance of a doubly-fed induction generator- based wind turbine using high-order sliding mode mechanical stress on the drive train). Simulations using the NREL FAST code on a 1.5-MW wind turbine

Boyer, Edmond

431

Morphology, displacement, and slip rates along the North Anatolian Fault, Turkey  

E-Print Network [OSTI]

Morphology, displacement, and slip rates along the North Anatolian Fault, Turkey Aure´lia Hubert, Ayazaga, Istanbul, Turkey Received 29 January 2001; revised 8 January 2002; accepted 13 January 2002 the central and eastern North Anatolian Fault (NAF) in Turkey. The NAF total displacement is reevaluated using

Hubert-Ferrari, Aurélia

432

Miocene faulting at plate tectonic velocity in the Himalaya of central Nepal  

E-Print Network [OSTI]

Miocene faulting at plate tectonic velocity in the Himalaya of central Nepal Matthew J. Kohna, Tri-Chandra Campus, Ghantaghar, Kathmandu, Nepal, United States Received 7 April 2004; received (MCT) and affiliated faults in central Nepal. Inferred rates were 1.5F0.9 cm/yr (Langtang Thrust, ~19

433

Off-fault plasticity and earthquake rupture dynamics: 2. Effects of fluid saturation  

E-Print Network [OSTI]

Off-fault plasticity and earthquake rupture dynamics: 2. Effects of fluid saturation Robert C slip-weakening behavior is specified, and the off-fault material is described using an elastic-plastic poroelastoplastic materials with and without plastic dilation. During nondilatant undrained response near

434

Modeling and simulation of a reformate supplied PEM fuel cell stack, application to fault detection  

E-Print Network [OSTI]

Modeling and simulation of a reformate supplied PEM fuel cell stack, application to fault detection exchange membrane (PEM) fuel cells are the main type of fuel cell developed for ground vehicle applications tool for thermal characteristic and fault detection of a PEM fuel cell stack. The fuel cell stack model

Paris-Sud XI, Université de

435

A 2D Pseudodynamic Rupture Model Generator for Earthquakes on Geometrically Complex Faults  

E-Print Network [OSTI]

A 2D Pseudodynamic Rupture Model Generator for Earthquakes on Geometrically Complex Faults complexity in the rupture process and resulting ground motion. We present a 2D kinematic rupture generator that emulates the strong dependence of earthquake source parameters on local fault geometry observed in dynamic

Dunham, Eric M.

436

A nested invocation suppression mechanism for active replication fault-tolerant CORBA  

E-Print Network [OSTI]

1 A nested invocation suppression mechanism for active replication fault-tolerant CORBA Deron Liang. The redundant nested invocation (RNI) problem arises when servers in a replicated group issues nested a mechanism to perform auto-suppression of redundant nested invocation in an active replication fault

Chen, Sheng-Wei

437

Real-time fault detection and isolation in biological wastewater treatment plants  

E-Print Network [OSTI]

Real-time fault detection and isolation in biological wastewater treatment plants F. Baggiani and S@dsi.unifi.it Automatic fault detection is becoming increasingly important in wastewater treatment plant operation, given automation controllers, wastewater treatment INTRODUCTION Real-time monitoring is an increasingly important

438

An On-line Method for Stator Fault Detection in Multi-phase PMSM Drives  

E-Print Network [OSTI]

An On-line Method for Stator Fault Detection in Multi-phase PMSM Drives Fabien Meinguet*, Eric deals with an on-line fault detection method for multi-phase PMSM drives. The method is based an original method for detecting an abnormal asymmetrical behavior in five-phase PMSM drives and we apply

Paris-Sud XI, Université de

439

Oil and Gas CDT Predicting fault permeability at depth: incorporating natural  

E-Print Network [OSTI]

Oil and Gas CDT Predicting fault permeability at depth: incorporating natural permeability controls on fluid flow in oil and gas reservoirs. Fault zones are composed of many deformation elements will receive 20 weeks bespoke, residential training of broad relevance to the oil and gas industry: 10 weeks

Henderson, Gideon

440

Bayesian network for the characterization of faults in a multivariate process  

E-Print Network [OSTI]

Bayesian network for the characterization of faults in a multivariate process Sylvain VERRON of multivariate processes, we propose an original network structure allowing deciding if a fault is appeared in the process. More, this structure permits the identification of the variables that are responsible (root

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Fault current limiter and alternating current circuit breaker  

DOE Patents [OSTI]

A solid-state circuit breaker and current limiter are disclosed for a load served by an alternating current source having a source impedance, the solid-state circuit breaker and current limiter comprising a thyristor bridge interposed between the alternating current source and the load, the thyristor bridge having four thyristor legs and four nodes, with a first node connected to the alternating current source, and a second node connected to the load. A coil is connected from a third node to a fourth node, the coil having an impedance of a value calculated to limit the current flowing therethrough to a predetermined value. Control means are connected to the thyristor legs for limiting the alternating current flow to the load under fault conditions to a predetermined level, and for gating the thyristor bridge under fault conditions to quickly reduce alternating current flowing therethrough to zero and thereafter to maintain the thyristor bridge in an electrically open condition preventing the alternating current from flowing therethrough for a predetermined period of time. 9 figs.

Boenig, H.J.

1998-03-10T23:59:59.000Z

442

A core-based assessment of the spatial relationship of small faults associated with a basement-controlled, large normal fault in the Hickory Sandstone  

E-Print Network [OSTI]

with reverse-slip, showing associated fault strike, dip polarity and cumulative displacement per foot????????????????????? Page 79 80 81 82 83 84 85 86 87 88 89 xii FIGURE 52 Borehole NNR-8: Distribution of small faults with reverse... they were purged from the ?density? measures???.. 3 Descriptive statistics for sample data (n = 692) of displacement, gouge thickness and corresponding log transforms????????????. 4 Summary statistics for ln displacement of all four grain sizes for a...

Graff, Mitchell C

2006-10-30T23:59:59.000Z

443

Identification of critical stacking faults in thin-film CdTe solar cells  

SciTech Connect (OSTI)

Cadmium telluride (CdTe) is a p-type semiconductor used in thin-film solar cells. To achieve high light-to-electricity conversion, annealing in the presence of CdCl{sub 2} is essential, but the underlying mechanism is still under debate. Recent evidence suggests that a reduction in the high density of stacking faults in the CdTe grains is a key process that occurs during the chemical treatment. A range of stacking faults, including intrinsic, extrinsic, and twin boundary, are computationally investigated to identify the extended defects that limit performance. The low-energy faults are found to be electrically benign, while a number of higher energy faults, consistent with atomic-resolution micrographs, are predicted to be hole traps with fluctuations in the local electrostatic potential. It is expected that stacking faults will also be important for other thin-film photovoltaic technologies.

Yoo, Su-Hyun; Walsh, Aron, E-mail: a.walsh@bath.ac.uk [Global E3 Institute, Department of Materials Science and Engineering, Yonsei University, Seoul 120-749 (Korea, Republic of); Centre for Sustainable Chemical Technologies and Department of Chemistry, University of Bath, Bath BA2 7AY (United Kingdom); Butler, Keith T. [Centre for Sustainable Chemical Technologies and Department of Chemistry, University of Bath, Bath BA2 7AY (United Kingdom); Soon, Aloysius [Global E3 Institute, Department of Materials Science and Engineering, Yonsei University, Seoul 120-749 (Korea, Republic of); Abbas, Ali; Walls, John M., E-mail: j.m.wall@loughborough.ac.uk [Centre for Renewable Energy Systems Technology, School of Electronic, Electrical and Systems Engineering, Loughborough University, Leicestershire LE11 3TU (United Kingdom)

2014-08-11T23:59:59.000Z

444

Sensor Fault-Tolerant Control of an Induction Motor Based Electric Vehicle Bekhera Tabbache1,2  

E-Print Network [OSTI]

Sensor Fault-Tolerant Control of an Induction Motor Based Electric Vehicle Bekheïra Tabbache1://www.lbms.fr Keywords Electric Vehicle (EV), Induction motor, Sensor fault, Fault-tolerant control (FTC), Direct torque a reconfigurable direct torque control of an induction motor-based electric vehicle. The proposed strategy concerns

Paris-Sud XI, Université de

445

Earthquake Rupture at Focal Depth, Part I: Structure and Rupture of the Pretorius Fault, TauTona Mine, South Africa  

E-Print Network [OSTI]

Tona Mine, South Africa V. HEESAKKERS,1,2 S. MURPHY,1,3 and Z. RECHES 1 Abstract--We analyze the structure of the Archaean Pretorius fault in TauTona mine, South Africa, as well as the rupture-zone that recently, South Africa 2011, this volume). Key words: Brittle faulting, fault reactivation, earthquake mechanics

Ze'ev, Reches

446

Proceedings of the 2008 International Conference on Electrical Machines Paper ID 1434 DFIG-Based Wind Turbine Fault Diagnosis  

E-Print Network [OSTI]

-Based Wind Turbine Fault Diagnosis Using a Specific Discrete Wavelet Transform E. Al-Ahmar1,2 , M for electrical and mechanical fault diagnosis in a DFIG-based wind turbine. The investigated technique unambiguously diagnose faults under transient conditions. Index Terms--Wind turbine, Doubly-Fed Induction

Boyer, Edmond

447

Simulation of a flexible wind turbine response to a grid fault Anca D. Hansen*, Nicolaos A. Cutululis*, Poul Srensen*,  

E-Print Network [OSTI]

Simulation of a flexible wind turbine response to a grid fault Anca D. Hansen*, Nicolaos A of a wind turbine. Grid faults generate transients in the generator electromagnetic torque, which are propagated in the wind turbine, stressing its mechanical components. Grid faults are normally simulated

448

Interseismic deformation and creep along the central section of the North Anatolian Fault (Turkey): InSAR observations  

E-Print Network [OSTI]

Interseismic deformation and creep along the central section of the North Anatolian Fault (Turkey the central section of the North Anatolian Fault (NAF) in Turkey using interferometric synthetic aperture along the central section of the North Anatolian Fault (Turkey): InSAR observations and implications

Fialko, Yuri

449

Interseismic deformation and creep along the central section of the North Anatolian Fault (Turkey): InSAR observations  

E-Print Network [OSTI]

Interseismic deformation and creep along the central section of the North Anatolian Fault (Turkey Anatolian Fault (NAF) in Turkey using interferometric synthetic aperture radar data from the Advanced Land Anatolian Fault (Turkey): InSAR observations and implications for rate-and-state friction properties, J

Sandwell, David T.

450

Off-fault plasticity and earthquake rupture dynamics: 1. Dry materials or neglect of fluid pressure changes  

E-Print Network [OSTI]

Off-fault plasticity and earthquake rupture dynamics: 1. Dry materials or neglect of fluid pressure an explicit dynamic finite element procedure. A Mohr-Coulomb type elastic-plastic description describes-fault plasticity during dynamic rupture. Those include the angle with the fault of the maximum compressive

451

Characterization of underground cable incipient failures from on-line monitoring of underground distribution power systems  

E-Print Network [OSTI]

With the imminent re-regulation of the power industry and investor owned utilities becoming more cost conscious, the need for an on-line, non-destructive, incipient cable fault detection system is prevalent. With such an incipient fault detection...

Cardoso, Jesus

1999-01-01T23:59:59.000Z

452

Commissioning and Diagnosis of VAV Air-Conditioning Systems  

E-Print Network [OSTI]

This paper presents a fault detection and diagnosis (FDD) strategy based on system knowledge, qualitative states and object-oriented statistical process control (SPC) models for typical pressure-independent variable air volume (VAV) air...

Qin, J.; Wang, S.; Chan, C.; Xiao, F.

2006-01-01T23:59:59.000Z

453

Design of a decentralized detection filter for a class of interconnected LTI systems  

E-Print Network [OSTI]

In this thesis, we consider the problem of designing a decentralized detection filter for a class of homogeneous interconnected systems. In this class of systems, all subsystems have an identical structure. A fault in a subsystem propagates via...

Shankar, Shamanth

2001-01-01T23:59:59.000Z

454

Fault-tolerant corrector/detector chip for high-speed data processing  

DOE Patents [OSTI]

An internally fault-tolerant data error detection and correction integrated circuit device and a method of operating same is described. The device functions as a bidirectional data buffer between a 32-bit data processor and the remainder of a data processing system and provides a 32-bit datum with a relatively short eight bits of data-protecting parity. The 32-bits of data by eight bits of parity is partitioned into eight 4-bit nibbles and two 4-bit nibbles, respectively. For data flowing towards the processor the data and parity nibbles are checked in parallel and in a single operation employing a dual orthogonal basis technique. The dual orthogonal basis increase the efficiency of the implementation. Any one of ten (eight data, two parity) nibbles are correctable if erroneous, or two different erroneous nibbles are detectable. For data flowing away from the processor the appropriate parity nibble values are calculated and transmitted to the system along with the data. The device regenerates parity values for data flowing in either direction and compares regenerated to generated parity with a totally self-checking equality checker. As such, the device is self-validating and enabled to both detect and indicate an occurrence of an internal failure. A generalization of the device to protect 64-bit data with 16-bit parity to protect against byte-wide errors is also presented. 8 figures.

Andaleon, D.D.; Napolitano, L.M. Jr.; Redinbo, G.R.; Shreeve, W.O.

1994-03-01T23:59:59.000Z

455

Fault-tolerant corrector/detector chip for high-speed data processing  

DOE Patents [OSTI]

An internally fault-tolerant data error detection and correction integrated circuit device (10) and a method of operating same. The device functions as a bidirectional data buffer between a 32-bit data processor and the remainder of a data processing system and provides a 32-bit datum is provided with a relatively short eight bits of data-protecting parity. The 32-bits of data by eight bits of parity is partitioned into eight 4-bit nibbles and two 4-bit nibbles, respectively. For data flowing towards the processor the data and parity nibbles are checked in parallel and in a single operation employing a dual orthogonal basis technique. The dual orthogonal basis increase the efficiency of the implementation. Any one of ten (eight data, two parity) nibbles are correctable if erroneous, or two different erroneous nibbles are detectable. For data flowing away from the processor the appropriate parity nibble values are calculated and transmitted to the system along with the data. The device regenerates parity values for data flowing in either direction and compares regenerated to generated parity with a totally self-checking equality checker. As such, the device is self-validating and enabled to both detect and indicate an occurrence of an internal failure. A generalization of the device to protect 64-bit data with 16-bit parity to protect against byte-wide errors is also presented.

Andaleon, David D. (San Ramon, CA); Napolitano, Jr., Leonard M. (Danville, CA); Redinbo, G. Robert (Davis, CA); Shreeve, William O. (Fayetteville, NY)

1994-01-01T23:59:59.000Z

456

Evaluation of the location and recency of faulting near prospective surface facilities in Midway Valley, Nye County, Nevada  

SciTech Connect (OSTI)

Evaluation of surface faulting that may pose a hazard to prospective surface facilities is an important element of the tectonic studies for the potential Yucca Mountain high-level radioactive waste repository in southwestern Nevada. For this purpose, a program of detailed geologic mapping and trenching was done to obtain surface and near-surface geologic data that are essential for determining the location and recency of faults at a prospective surface-facilities site located east of Exile Hill in Midway Valley, near the eastern base of Yucca Mountain. The dominant tectonic features in the Midway Valley area are the north- to northeast-trending, west-dipping normal faults that bound the Midway Valley structural block-the Bow Ridge fault on the west side of Exile Hill and the Paint-brush Canyon fault on the east side of the valley. Trenching of Quaternary sediments has exposed evidence of displacements, which demonstrate that these block-bounding faults repeatedly ruptured the surface during the middle to late Quaternary. Geologic mapping, subsurface borehole and geophysical data, and the results of trenching activities indicate the presence of north- to northeast-trending faults and northwest-trending faults in Tertiary volcanic rocks beneath alluvial and colluvial sediments near the prospective surface-facilities site. North to northeast-trending faults include the Exile Hill fault along the eastern base of Exile Hill and faults to the east beneath the surficial deposits of Midway Valley. These faults have no geomorphic expression, but two north- to northeast-trending zones of fractures exposed in excavated profiles of middle to late Pleistocene deposits at the prospective surface-facilities site appear to be associated with these faults. Northwest-trending faults include the West Portal and East Portal faults, but no disruption of Quaternary deposits by these faults is evident. The western zone of fractures is associated with the Exile Hill fault. The eastern zone of fractures is within Quaternary alluvial sediments, but no bedrock was encountered in trenches and soil pits in this part of the prospective surface facilities site; thus, the direct association of this zone with one or more bedrock faults is uncertain. No displacement of lithologic contacts and soil horizons could be detected in the fractured Quaternary deposits. The results of these investigations imply the absence of any appreciable late Quaternary faulting activity at the prospective surface-facilities site.

Swan, F.H.; Wesling, J.R.; Angell, M.M.; Thomas, A.P.; Whitney, J.W.; Gibson, J.D.

2002-01-17T23:59:59.000Z

457

EMTP modeling of CIGRE benchmark based HVDC transmission system operating with weak AC systems  

SciTech Connect (OSTI)

An EMTP based study of a CIGRE benchmark based HVDC system operating with weak ac systems is carried out. The modeled system provides a starting point for (a) educators teaching HVDC transmission courses and (b) for utility planners to develop their own low-cost dedicated digital simulators for training purposes. In this paper, modeling details of the ac-dc system, dc converters and control are presented. To validate the control schemes presented, the HVDC system is tested under ac-dc fault conditions. Results obtained from an EMTP-based study under these fault conditions are also presented in this paper.

Sood, V.K. [Hydro-Quebec, Varennes, Quebec (Canada); Khatri, V.; Jin, H. [Concordia Univ., Montreal, Quebec (Canada). Dept. of Electrical and Computer Engineering

1995-12-31T23:59:59.000Z

458

Palinspastic fault reconstruction in the central part of the Corsair Trend, offshore Texas  

E-Print Network [OSTI]

Petroleo, S. A. for their support during my studies. TABLE OF CONTENTS CHAPTER I INTRODUCTION A Objective B Geologic Setting C Stratigraphic History D Salt Mobilization and Faulting E Previous Work F Data Base and Procedure PALINSPASTIC...

Barrientos, Jaime

1989-01-01T23:59:59.000Z

459

An efficient logic fault diagnosis framework based on effect-cause approach  

E-Print Network [OSTI]

suspect nets using several common fault models. The difference between the observed faulty behavior and the simulated behavior is used to rank each suspect. Experimental results on ISCAS85 benchmark circuits show that this diagnosis approach is efficient...

Wu, Lei

2009-05-15T23:59:59.000Z

460

Mutation Analysis for the Evaluation of Functional Fault Models Qiushuang Zhang and Ian Harris  

E-Print Network [OSTI]

1 Mutation Analysis for the Evaluation of Functional Fault Models Qiushuang Zhang and Ian Harris@ecs.umass.edu, harris@ecs.umass.edu I. INTRODUCTION Design validation by simulation-based techniques is the most common

Harris, Ian G.

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

June 4, 2007 Advanced Fault Tolerance Solutions for High Performance Computing  

E-Print Network [OSTI]

June 4, 2007 Advanced Fault Tolerance Solutions for High Performance Computing Workshop on Trends Tolerance Solutions for High Performance Computing Christian Engelmann Oak Ridge National Laboratory, Oak Solutions for High Performance Computing Workshop on Trends, Technologies and Collaborative Opportunities

Engelmann, Christian

462

June 8, 2007 Advanced Fault Tolerance Solutions for High Performance Computing  

E-Print Network [OSTI]

June 8, 2007 Advanced Fault Tolerance Solutions for High Performance Computing Workshop on Trends Tolerance Solutions for High Performance Computing Christian Engelmann Oak Ridge National Laboratory, Oak for High Performance Computing Workshop on Trends, Technologies and Collaborative Opportunities in High

Engelmann, Christian

463

Cabala : a speculative execution framework to make Linux services fault tolerant  

E-Print Network [OSTI]

Cabala is a speculative execution framework that enables server programs in Linux to be fault tolerant. The errors it targets are run-time errors that are due to program bugs, and which cause program exit; in particular, ...

Joshi, Kavya (Kavya U.)

2013-01-01T23:59:59.000Z

464

Modeling quantum noise for efficient testing of fault-tolerant circuits  

E-Print Network [OSTI]

Understanding fault-tolerant properties of quantum circuits is important for designing large-scale quantum information processors. In particular, simulating properties of encoded circuits is a crucial tool for investigating ...

Magesan, Easwar

465

Modeling fault-zone guided waves of microearthquakes in a geothermal...  

Open Energy Info (EERE)

the identification and modeling of such guided waves is an effective tool to locate fracture-induced, low-velocity fault-zone structures in geothermal fields. Authors Lou, M.;...

466

Advanced fault diagnosis techniques and their role in preventing cascading blackouts  

E-Print Network [OSTI]

issues were solved by coordinating multiple neural networks and improving the feature extraction method. A new boundary protection scheme was designed by using a wavelet transform and fuzzy ART neural network. By extracting the fault gen- erated high...

Zhang, Nan

2007-04-25T23:59:59.000Z

467

Mechanical fault interaction within the Los Angeles Basin: A two-dimensional analysis using mechanical efficiency  

E-Print Network [OSTI]

Mechanical fault interaction within the Los Angeles Basin: A two-dimensional analysis using mechanical efficiency Michele L. Cooke Geosciences Department, University of Massachusetts-Amherst, Amherst July 2002. [1] Mechanical models examine deformation within eight different structural cross sections

Cooke, Michele

468

Fault Tolerant MapReduce-MPI using User Level Failure Mitigation...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

different models to achieve fault tolerance in MR-MPI: checkpoint-restart and detect-resume. The checkpoint-restart model is implemented using the current MPI standard. It allows...

469

Localization instability and the origin of regularly-spaced faults in planetary lithospheres  

E-Print Network [OSTI]

Brittle deformation is not distributed uniformly in planetary lithospheres but is instead localized on faults and ductile shear zones. In some regions such as the Central Indian Basin or martian ridged plains, localized ...

Montési, Laurent Gilbert Joseph, 1973-

2002-01-01T23:59:59.000Z

470

Comparative analysis of electrical and mechanical fault signatures in induction motors  

E-Print Network [OSTI]

of interest. Due to its cost-effective nature and ease of use, electrical sensors are preinstalled at the motor switchgear by manufacturers. However in order to achieve this for mechanical faults, a systematic comparison between the vibration signatures...

Venugopal, Arvind Madabushi

2005-02-17T23:59:59.000Z

471

Structure and tectonics of the Sumatra Fault Zone-Sundra Trench junction  

E-Print Network [OSTI]

. The objective of this study is to determine the structures of the Sunda Strait forearm region, the south - southeast continuation of the Sumatra Fault, and model the tectonic development. All available geophysical data for the Sunda Strait forearm region have...

Handayani, Lina

2012-06-07T23:59:59.000Z

472

Process variation-aware multiple-fault diagnosis of thermometer-coded current-steering DACs  

E-Print Network [OSTI]

detection rate. 8 m/2 m/2x2 thermometer decoder Ci_m/2 Co_1Aware Structural Test of Thermometer Coded Current SteeringFault Diagnosis of Thermometer-Coded Current-Steering DACs

Topaloglu, R O

2007-01-01T23:59:59.000Z

473

Geologic and geomorphic analysis of the Organ Mountains fault, south-central New Mexico  

E-Print Network [OSTI]

GEOLOGIC AND GEOMORPHIC ANALYSIS OF THE ORGAN MOUNTAINS FAULT, SOUTH-CENTRAL NEW MEXICO A Thesis by TERRI S. BEEHNER Submited to the Office of Graduate Studies of Texas ARM University in partial fulfillment of the requirements for the degree... of MASTER OF SCIENCE December 1989 Major Subject: Geology GEOLOGIC AND GEOMORPHIC ANALYSIS OF THE ORGAN MOUNTAINS FAULT, SOUTH-CENTRAL NEW MEXICO A Thesis by TERRI S. BEEHNER Approved as to style and content by Norman R. Tilfor (Chair of Com ' e...

Beehner, Terri S.

1989-01-01T23:59:59.000Z

474

Fault-tolerant quantum computation with asymmetric Bacon-Shor codes  

E-Print Network [OSTI]

We develop a scheme for fault-tolerant quantum computation based on asymmetric Bacon-Shor codes, which works effectively against highly biased noise dominated by dephasing. We find the optimal Bacon-Shor block size as a function of the noise strength and the noise bias, and estimate the logical error rate and overhead cost achieved by this optimal code. Our fault-tolerant gadgets, based on gate teleportation, are well suited for hardware platforms with geometrically local gates in two dimensions.

Peter Brooks; John Preskill

2013-02-09T23:59:59.000Z

475

Numerical simulation of comminution in granular materials with an application to fault gouge evolution  

E-Print Network [OSTI]

NUMERICAL SIMULATION OF COMMINUTION IN GRANULAR MATERIALS WITH AN APPLICATION TO FAULT GOUGE EVOLUTION A Thesis by RICHARD ANTHONY LANG Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment... of the requirements for the degree of MASTER OF SCIENCE May 2002 Major Subject: Geophysics NUMERICAL SIMULATION OF COMMINUTION IN GRANULAR MATERIALS WITH AN APPLICATION TO FAULT GOUGE EVOLUTION A Thesis by RICHARD ANTHONY LANG Submitted...

Lang, Richard Anthony

2004-09-30T23:59:59.000Z

476

On strong fault tolerance (or strong Menger-connectivity) of multicomputer networks  

E-Print Network [OSTI]

disjoint paths. Thus, the study of disjoint paths connecting any two nodes can be useful for increasing the reliability of inter- connection networks, as well as transmission efficiency. A larger number of disjoint paths is more desirable because of less..., node- disjoint paths have been extensively studied on networks [8, 18, 26]. Most research on constructing node-disjoint paths is done in graphs without faults. In this dissertation, we introduce the concept of strong fault tolerance which characterizes...

Oh, Eunseuk

2004-11-15T23:59:59.000Z

477

Apparatus for and method of testing an electrical ground fault circuit interrupt device  

DOE Patents [OSTI]

An apparatus for testing a ground fault circuit interrupt device includes a processor, an input device connected to the processor for receiving input from an operator, a storage media connected to the processor for storing test data, an output device connected to the processor for outputting information corresponding to the test data to the operator, and a calibrated variable load circuit connected between the processor and the ground fault circuit interrupt device. The ground fault circuit interrupt device is configured to trip a corresponding circuit breaker. The processor is configured to receive signals from the calibrated variable load circuit and to process the signals to determine a trip threshold current and/or a trip time. A method of testing the ground fault circuit interrupt device includes a first step of providing an identification for the ground fault circuit interrupt device. Test data is then recorded in accordance with the identification. By comparing test data from an initial test with test data from a subsequent test, a trend of performance for the ground fault circuit interrupt device is determined. 17 figs.

Andrews, L.B.

1998-08-18T23:59:59.000Z

478

Apparatus for and method of testing an electrical ground fault circuit interrupt device  

DOE Patents [OSTI]

An apparatus for testing a ground fault circuit interrupt device includes a processor, an input device connected to the processor for receiving input from an operator, a storage media connected to the processor for storing test data, an output device connected to the processor for outputting information corresponding to the test data to the operator, and a calibrated variable load circuit connected between the processor and the ground fault circuit interrupt device. The ground fault circuit interrupt device is configured to trip a corresponding circuit breaker. The processor is configured to receive signals from the calibrated variable load circuit and to process the signals to determine a trip threshold current and/or a trip time. A method of testing the ground fault circuit interrupt device includes a first step of providing an identification for the ground fault circuit interrupt device. Test data is then recorded in accordance with the identification. By comparing test data from an initial test with test data from a subsequent test, a trend of performance for the ground fault circuit interrupt device is determined.

Andrews, Lowell B. (2181-13th Ave. SW., Largo, FL 34640)

1998-01-01T23:59:59.000Z

479

Structural health and prognostics management for offshore wind turbines : case studies of rotor fault and blade damage with initial O&M cost modeling.  

SciTech Connect (OSTI)

Operations and maintenance costs for offshore wind plants are significantly higher than the current costs for land-based (onshore) wind plants. One way to reduce these costs would be to implement a structural health and prognostic management (SHPM) system as part of a condition based maintenance paradigm with smart load management and utilize a state-based cost model to assess the economics associated with use of the SHPM system. To facilitate the development of such a system a multi-scale modeling approach developed in prior work is used to identify how the underlying physics of the system are affected by the presence of damage and faults, and how these changes manifest themselves in the operational response of a full turbine. This methodology was used to investigate two case studies: (1) the effects of rotor imbalance due to pitch error (aerodynamic imbalance) and mass imbalance and (2) disbond of the shear web; both on a 5-MW offshore wind turbine in the present report. Based on simulations of damage in the turbine model, the operational measurements that demonstrated the highest sensitivity to the damage/faults were the blade tip accelerations and local pitching moments for both imbalance and shear web disbond. The initial cost model provided a great deal of insight into the estimated savings in operations and maintenance costs due to the implementation of an effective SHPM system. The integration of the health monitoring information and O&M cost versus damage/fault severity information provides the initial steps to identify processes to reduce operations and maintenance costs for an offshore wind farm while increasing turbine availability, revenue, and overall profit.

Myrent, Noah J. [Purdue Center for Systems Integrity, Lafayette, IN; Kusnick, Joshua F. [Purdue Center for Systems Integrity, Lafayette, IN; Barrett, Natalie C. [Purdue Center for Systems Integrity, Lafayette, IN; Adams, Douglas E. [Purdue Center for Systems Integrity, Lafayette, IN; Griffith, Daniel Todd

2013-04-01T23:59:59.000Z

480

ROSE::FTTransform - A Source-to-Source Translation Framework for Exascale Fault-Tolerance Research  

SciTech Connect (OSTI)

Exascale computing systems will require sufficient resilience to tolerate numerous types of hardware faults while still assuring correct program execution. Such extreme-scale machines are expected to be dominated by processors driven at lower voltages (near the minimum 0.5 volts for current transistors). At these voltage levels, the rate of transient errors increases dramatically due to the sensitivity to transient and geographically localized voltage drops on parts of the processor chip. To achieve power efficiency, these processors are likely to be streamlined and minimal, and thus they cannot be expected to handle transient errors entirely in hardware. Here we present an open, compiler-based framework to automate the armoring of High Performance Computing (HPC) software to protect it from these types of transient processor errors. We develop an open infrastructure to support research work in this area, and we define tools that, in the future, may provide more complete automated and/or semi-automated solutions to support software resiliency on future exascale architectures. Results demonstrate that our approach is feasible, pragmatic in how it can be separated from the software development process, and reasonably efficient (0% to 30% overhead for the Jacobi iteration on common hardware; and 20%, 40%, 26%, and 2% overhead for a randomly selected subset of benchmarks from the Livermore Loops [1]).

Lidman, J; Quinlan, D; Liao, C; McKee, S

2012-03-26T23:59:59.000Z

Note: This page contains sample records for the topic "magadi fault system" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Cluster-based architecture for fault-tolerant quantum computation  

E-Print Network [OSTI]

We present a detailed description of an architecture for fault-tolerant quantum computation, which is based on the cluster model of encoded qubits. In this cluster-based architecture, concatenated computation is implemented in a quite different way from the usual circuit-based architecture where physical gates are recursively replaced by logical gates with error-correction gadgets. Instead, some relevant cluster states, say fundamental clusters, are recursively constructed through verification and postselection in advance for the higher-level one-way computation, which namely provides error-precorrection of gate operations. A suitable code such as the Steane seven-qubit code is adopted for transversal operations. This concatenated construction of verified fundamental clusters has a simple transversal structure of logical errors, and achieves a high noise threshold ~ 3 % for computation by using appropriate verification procedures. Since the postselection is localized within each fundamental cluster with the help of deterministic bare controlled-Z gates without verification, divergence of resources is restrained, which reconciles postselection with scalability.

Keisuke Fujii; Katsuji Yamamoto

2009-12-28T23:59:59.000Z

482

Development of Temperature and Humidity-Based Indicators for Diagnosing Problems in Low Tonnage, Split System Air Conditioners  

E-Print Network [OSTI]

of HVAC systems for building optimization, fault detection and diagnosis. October. Finland: Technical Research Center of Finland, Laboratory of Heating and Ventilation, B. 0. Box 206 (Lampomiehenkuja 3) 02150 ESPOO. Kaler. G. 1988. Expert system...

Watt, J. B.; O'Neal, D. L.; Haberl, J. S.

1998-01-01T23:59:59.000Z

483

Design of cooperative mobile robot system: a low-cost test-bed and an example application  

E-Print Network [OSTI]

Implementation of cooperative robot systems in search, exploration, or delivery tasks can potentially provide advantages over a single robot system. For example, better performance, fault tolerance through agent redundancy, and lower individual...

Na, Youngchul

2002-01-01T23:59:59.000Z

484

Opaline cherts associated with sublacustrine hydrothermal springs at Lake Bogoria, Kenya Rift valley  

SciTech Connect (OSTI)

An unusual group of cherts found at saline, alkaline Lake Bogoria in the Kenya Rift differs from the Magadi-type cherts commonly associated with saline, alkaline lakes. The cherts are opaline, rich in diatoms, and formed from a siliceous, probably gelatinous, precursor that precipitated around submerged alkaline hot springs during a Holocene phase of high lake level. Silica precipitation resulted from rapid drop in the temperature of the spring waters and, possibly, pH. Lithification began before subaerial exposure. Ancient analogous cherts are likely to be localized deposits along fault lines.

Renaut, R.W.; Owen, R.B.

1988-08-01T23:59:59.000Z

485

The nature of the Heart Mountain fault in the vicinity of Dead Indian Hill, Park County, Wyoming  

E-Print Network [OSTI]

Mountain thrust blocks consti- tuted a very limited strat1graphic interval, consisting of Ordovician B1ghorn Dolomite, undifferentiated dolomi tes, 1 1mestones and shales of Devonian age (Jefferson-Three Forks Formations) and the Mississippian Madison... of the thrust the transgress1ve fault zone and reports the slope of the transgressive fault to be approximately 10 degrees. A field study was conducted in the area of the transgressive fault in an attempt to better understand the mechanics of how...

Sungy, Eugene Donald

1977-01-01T23:59:59.000Z

486

Protection from ground faults in the stator winding of generators at power plants in the Siberian networks  

SciTech Connect (OSTI)

The experience of many years of experience in developing and utilization of ground fault protection in the stator winding of generators in the Siberian networks is generalized. The main method of protection is to apply a direct current or an alternating current with a frequency of 25 Hz to the primary circuits of the stator. A direct current is applied to turbo generators operating in a unit with a transformer without a resistive coupling to the external grid or to other generators. Applying a 25 Hz control current is appropriate for power generation systems with compensation of a capacitive short circuit current to ground. This method forms the basis for protection of generators operating on busbars, hydroelectric generators with a neutral grounded through an arc-suppression reactor, including in consolidated units with generators operating in parallel on a single low-voltage transformer winding.

Vainshtein, R. A., E-mail: vra@tpu.ru [Tomsk Polytechnical University (Russian Federation); Lapin, V. I. [ODU Sibiri (Integrated Dispatcher Control for Siberia), branch of JSC 'SO EES' (Russian Federation); Naumov, A. M.; Doronin, A. V. [JSC NPP 'EKRA' (Russian Federation); Yudin, S. M. [Tomsk Polytechnical University (Russian Federation)

2010-05-15T23:59:59.000Z

487

Three-dimensional numerical modeling of the influence of faults on groundwater flow at Yucca Mountain, Nevada  

SciTech Connect (OSTI)

Numerical simulations of groundwater flow at Yucca Mountain, Nevada are used to investigate how the faulted hydrogeologic structure influences groundwater flow from a proposed high-level nuclear waste repository. Simulations are performed using a 3-D model that has a unique grid block discretization to accurately represent the faulted geologic units, which have variable thicknesses and orientations. Irregular grid blocks enable explicit representation of these features. Each hydrogeologic layer is discretized into a single layer of irregular and dipping grid blocks, and faults are discretized such that they are laterally continuous and displacement varies along strike. In addition, the presence of altered fault zones is explicitly modeled, as appropriate. The model has 23 layers and 11 faults, and approximately 57,000 grid blocks and 200,000 grid block connections. In the past, field measurement of upward vertical head gradients and high water table temperatures near faults were interpreted as indicators of upwelling from a deep carbonate aquifer. Simulations show, however, that these features can be readily explained by the geometry of hydrogeologic layers, the variability of layer permeabilities and thermal conductivities, and by the presence of permeable fault zones or faults with displacement only. In addition, a moderate water table gradient can result from fault displacement or a laterally continuous low permeability fault zone, but not from a high permeability fault zone, as others postulated earlier. Large-scale macrodispersion results from the vertical and lateral diversion of flow near the contact of high and low permeability layers at faults, and from upward flow within high permeability fault zones. Conversely, large-scale channeling can occur due to groundwater flow into areas with minimal fault displacement. Contaminants originating at the water table can flow in a direction significantly different than that of the water table gradient, and isolated zones of contaminants will occur at the water table downgradient. This behavior is not predicted by traditional models of contaminant transport. In addition, the influence of a particular type of fault cannot be generalized; depending on the location where contaminants enter the saturated zone, faults may either enhance of inhibit vertical dispersion.

Cohen, Andrew J.B.

1999-06-01T23:59:59.000Z

488

MODELING AND SIMULATION OF HVAC FAULTS IN ENERGYPLUS  

E-Print Network [OSTI]

Methodology for Secondary HVAC Systems, Doctoral Thesis,2002, Particulate Fouling of HVAC Heat Exchangers, Doctoraland diagnosis strategy for HVAC systems involving sensor

Basarkar, Mangesh

2013-01-01T23:59:59.000Z

489

Interplay between intrinsic and stacking-fault magnetic domains in bi-layered manganites  

SciTech Connect (OSTI)

We present a low temperature X-ray photoemission electron microscopy study of the bi-layered manganite compound La{sub 1.2}Sr{sub 1.8}Mn{sub 2}O{sub 7} (BL-LSMO) to investigate the influence of stacking faults, which are structurally and magnetically different from the bi-layered host. In BL-LSMO small magnetic moment persists to T* = 300K, well above the Curie temperature of 120K (T{sub C}). Our magnetic images show that 3D stacking faults are responsible for the T* transition. Furthermore, close to the T{sub C}, stacking faults are well coupled to the bi-layered host with latter magnetic domains controlling the spin direction of the stacking faults. Contrary to recent reports, we find that stacking faults do not seed magnetic domains in the host via an exchange spring mechanism and the intrinsic T{sub C} of the BL-LSMO is not lower than 120K.

Hossain, M.A; Burkhardt, Mark H.; Sarkar, S.; Ohldag, H.; Chuang, Y.-D.; Scholl, A.; Young, A.T.; Doran, A.; Dessau, D.S.; Zheng, H.; Mitchell, J.F.; Durr, H.A.; Stohr, J.

2012-09-11T23:59:59.000Z

490

The design and enhancement of a testbed for the remote system monitoring interface device technology  

E-Print Network [OSTI]

Texas A&M University is developing an information technology-based system that is able to continuously monitor and diagnose faults of electrical motors, based solely on electrical signals available at the motor terminals, such as current and voltage...

Turner, Regan Christopher

2013-02-22T23:59:59.000Z

491

SYSTEMS DIVISION RESEARCH 2013 1 Abstract--High-Redundancy Actuator (HRA) refers to an  

E-Print Network [OSTI]

AND MOTIVATION Modern engineering technologies depend strongly on complex design to meet their required of the system. Parallel configuration will also be rendered useless when lock-up faults occur. HRA is a new

492

Extending and automating a systems-theoretic hazard analysis for requirements generation and analysis  

E-Print Network [OSTI]

Systems Theoretic Process Analysis (STPA) is a powerful new hazard analysis method designed to go beyond traditional safety techniques-such as Fault Tree Analysis (FTA)-that overlook important causes of accidents like ...

Thomas, John P., IV

2013-01-01T23:59:59.000Z

493

A Review of the Initiating Event Fault Tree Development and Usage at the ENS Sites  

SciTech Connect (OSTI)

This paper provides an overview of the experience in developing and using the initiating event fault trees (IEFTs) in the base and EOOS Probabilistic Safety Assessment (PSA) models at the Entergy Nuclear South (ENS) sites. Simple fault tree models can be developed and linked to the master fault tree in order to provide a better estimate of plant-specific initiating event frequencies. If developed considering certain aspects, there can be significant advantages to using IEFT methodology for some initiators, especially in the plant EOOS models. The most important advantage is to have EOOS re-calculate and use such initiating event frequencies for different alignments taking the components that are out of service into consideration while keeping the quantification time and complexity of the cut-sets at an acceptable level. The important steps for developing the IEFTs, some insights gained through the experience at the ENS sites, and the advantages of using IEFTs will be discussed in this paper. (authors)

Yilmaz, Fatma; Bedell, Loys [Entergy Nuclear South (United States)

2006-07-01T23:59:59.000Z

494

LMFBR operational and experimental local-fault experience, primarily with oxide fuel elements  

SciTech Connect (OSTI)

Case-by-case reviews of selective world experience with severe local faults, particularly fuel failure and fuel degradation, are reviewed for two sodium-cooled thermal reactors, several LMFBRs, and LMFBR-fuels experiments. The review summarizes fuel-failure frequency and illustrates the results of the most damaging LMFBR local-fault experiences of the last 20 years beginning with BR-5 and including DFR, BOR-60, BR2's MFBS- and Mol-loops experiments, Fermi, KNK, Rapsodie, EBR-II, and TREAT-D2. Local-fault accommodation is demonstrated and a need to more thoroughly investigate delayed-neutron and gaseous-fission-product signals is highlighted in view of uranate formation, observed blockages, and slow fuel-element failure-propagation.

Warinner, D.K.

1980-01-01T23:59:59.000Z

495

LMFBR operational and experimental in-core local-fault experience, primarily with oxide fuel elements  

SciTech Connect (OSTI)

Case-by-case reviews of selective world experience with severe local faults, particularly fuel failure and fuel degradation, are reviewed for two sodium-cooled thermal reactors, several LMFBRs, and LMFBR-fuels experiments. The review summarizes fuel-failure frequency and illustrates the results of the most damaging LMFBR local-fault experiences of the last 20 years beginning with BR-5 and including DFR, BOR-60, BR2's MFBS-and Mol-loops experiments, Fermi, KNK, Rapsodie, EBR-II, and TREAT-D2. Local-fault accommodation is demonstrated and a need to more thoroughly investigate delayed-neutron and gaseous-fission-product signals is highlighted in view of uranate formation, observed blockages, and slow fuel-element failure-propagation.

Warinner, D.K.

1980-08-10T23:59:59.000Z

496

MICRO-SEISMICITY, FAULT STRUCTURE AND HYDRAULIC COMPARTMENTALIZATION...  

Open Energy Info (EERE)

locations and subsurface velocity structure provide potential insights into fracture system geometry, fluid conduits and fluid compartmentalization critical to geothermal...

497

Effects of Volcanism, Crustal Thickness, and Large Scale Faulting...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Colorado. collaborativeprojectchilepeer2013.pdf More Documents & Publications Blind Geothermal System Exploration in Active Volcanic Environments; Multi-phase Geophysical...

498

"ch01" --2009/7/4 --4:33 --page 3 --#3 Thermo-and hydro-mechanical processes along faults during rapid slip  

E-Print Network [OSTI]

"ch01" -- 2009/7/4 -- 4:33 -- page 3 -- #3 Thermo- and hydro-mechanical processes along faults at highly stressed frictional micro-contacts, and (2) Thermal pressurization of fault-zone pore fluid. Both

499

Early Weichselian palaeoenvironments reconstructed from a mega-scale thrust-fault complex, Kanin Peninsula, northwestern Russia  

E-Print Network [OSTI]

-scale thrust-fault complex, Kanin Peninsula, northwestern Russia EILIV LARSEN, KURT H. KJ�R, MARIA JENSEN, IGOR a mega-scale thrust-fault complex, Kanin Peninsula, northwestern Russia. Boreas, Vol. 35, pp. 00Á00. Oslo and sorted sediments is superbly exposed on the north coast of the Kanin Peninsula, northwestern Russia

Ingólfsson, �lafur

500

Textural evidence for recent co-seismic circulation of fluids in the Nojima fault zone, Awaji island, Japan  

E-Print Network [OSTI]

. These carbonate-filled fractures are interpreted as the result of co-seismic hydraulic fracturing and upward very late in the evolution of the fault zone, and may be induced by co-seismic hydraulic fracturing.V. Keywords: Active fault; Co-seismic hydraulic fracturing; Fluid circulation; Carbonate infilling 0040

Demouchy, Sylvie