National Library of Energy BETA

Sample records for machines phone equipment

  1. Safe Operating Procedure LOCKOUT/TAGOUT FOR MACHINES & EQUIPMENT

    E-Print Network [OSTI]

    Tsymbal, Evgeny Y.

    Safe Operating Procedure (5/11) LOCKOUT/TAGOUT FOR MACHINES & EQUIPMENT: SPECIAL CIRCUMSTANCES://ehs.unl.edu/) Introduction This SOP is intended to work in tandem with other EHS SOPs related to Lockout/Tagout (LO/TO): · Lockout/Tagout for Machines & Equipment: Program Overview · Lockout/Tagout for Machines & Equipment

  2. Safe Operating Procedure LOCKOUT/TAGOUT FOR MACHINES & EQUIPMENT

    E-Print Network [OSTI]

    Tsymbal, Evgeny Y.

    Safe Operating Procedure (5/11) LOCKOUT/TAGOUT FOR MACHINES & EQUIPMENT: TRAINING AND INSPECTIONS during maintenance and repair operations. In these situations, a Lockout/Tagout (LO/TO) program must "Control of Hazardous Energy: Lockout/Tagout (LO/TO) for Machines and Equipment." This course is available

  3. Machine protection system for rotating equipment and method

    DOE Patents [OSTI]

    Lakshminarasimha, Arkalgud N. (Marietta, GA); Rucigay, Richard J. (Marietta, GA); Ozgur, Dincer (Kennesaw, GA)

    2003-01-01

    A machine protection system and method for rotating equipment introduces new alarming features and makes use of full proximity probe sensor information, including amplitude and phase. Baseline vibration amplitude and phase data is estimated and tracked according to operating modes of the rotating equipment. Baseline vibration and phase data can be determined using a rolling average and variance and stored in a unit circle or tracked using short term average and long term average baselines. The sensed vibration amplitude and phase is compared with the baseline vibration amplitude and phase data. Operation of the rotating equipment can be controlled based on the vibration amplitude and phase.

  4. if it is a gas leak, do not activate building alarms, use mobile phones, hand held radios, electronic equipment or light flammable material!

    E-Print Network [OSTI]

    Hickman, Mark

    gas leak gas leak if it is a gas leak, do not activate building alarms, use mobile phones, hand held radios, electronic equipment or light flammable material! 1. If you discover a Gas Leak, shout and check that the nearest gas isolator switch is off. 4. Evacuate the building immediately, avoiding

  5. Best Management Practice #9: Single-Pass Cooling Equipment |...

    Energy Savers [EERE]

    degreasers, hydraulic equipment, condensers, air compressors, welding machines, vacuum pumps, ice machines, x-ray equipment, and air conditioners. To remove the same heat...

  6. Rootkits on Smart Phones: Attacks, Implications and Opportunities

    E-Print Network [OSTI]

    Iftode, Liviu

    Rootkits on Smart Phones: Attacks, Implications and Opportunities Jeffrey Bickford Ryan O Smart phones are increasingly being equipped with operating sys- tems that compare in complexity with those on desktop comput- ers. This trend makes smart phone operating systems vulnerable to many

  7. UCI Equipment Management Peter's Exchange

    E-Print Network [OSTI]

    Wood, Marcelo A.

    the Asset Retirement Global document available in KFS under KFS Capital Asset Management (as the EIMR formUCI Equipment Management Peter's Exchange (UCI Surplus Sales) SURPLUS PICK-UP REQUEST Department) Phone: (949) 824-6111, 6447, 6519, 6100 Fax this form to (949) 824-4115, or e-mail Equipment-Management

  8. Energy Conservation Within the Paper Machine Room 

    E-Print Network [OSTI]

    Walker, P. J.; Erskine, K. J.

    1979-01-01

    their startling waste of energy, the corrective measures taken to reduce this waste of energy, the potential for waste recovery and equipment available for waste heat recovery. Areas under study include the press section, paper machine dryer section, and machine...

  9. Cell Phone Detection Techniques

    SciTech Connect (OSTI)

    Pratt, Richard M.; Bunch, Kyle J.; Puzycki, David J.; Slaugh, Ryan W.; Good, Morris S.; McMakin, Douglas L.

    2007-10-01

    A team composed of Rick Pratt, Dave Puczyki, Kyle Bunch, Ryan Slaugh, Morris Good, and Doug McMakin teamed together to attempt to exploit cellular telephone features and detect if a person was carrying a cellular telephone into a Limited Area. The cell phone’s electromagnetic properties were measured, analyzed, and tested in over 10 different ways to determine if an exploitable signature exists. The method that appears to have the most potential for success without adding an external tag is to measure the RF spectrum, not in the cell phone band, but between 240 and 400MHz. Figures 1- 7 show the detected signal levels from cell phones from three different manufacturers.

  10. The Cutting Edge of Modernity: Machine Tools in the United States and Germany 1930-1945

    E-Print Network [OSTI]

    Ristuccia, Cristiano A.; Tooze, J. Adam

    2004-06-16

    and that for December 1933.16 15 From 1930 the inventories also provided an increasing coverage on auxiliary metal-working plant equipment (heat treating, material handling, foundry equipment, finishing... into ovens), air compressors, oil extracting machines (from metal chips), parts washing machines, drying machines, pickling machines, tumbling barrels, sand blast equipment, spraying systems, portable welding outfits, portable tools (drills, grinders, power...

  11. "Android Forensics: Simplifying Cell Phone

    E-Print Network [OSTI]

    Almulhem, Ahmad

    "Android Forensics: Simplifying Cell Phone Examinations" Jeff Lessard, Gary Kessler 2010 Presented, to be exact. It's taken 16 years to pass 1 billion. Smart phone users #12;5 Smart phone users #12;6 Android.com, there were 300 million Android devices in use as of February 28, 2012 #12;7 · an open-sourced operating

  12. 2/1/2014 Teenytinywindmills could recharge phones | VantageWire http://www.vantagewire.com/2014/01/teeny-tiny-windmills-could-recharge-phones/ 1/2

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    /01/teeny-tiny-windmills-could-recharge-phones/ 1/2 Teeny tiny windmills could recharge phones Green Tech Share it now! 0 One of the tiny windmills. (Credit: University of Texas, Arlington) A microscopic windmill could one day provide a portable method of charging devices. The tiny machines, just 1

  13. Industrial Equipment Demand and Duty Factors 

    E-Print Network [OSTI]

    Dooley, E. S.; Heffington, W. M.

    1998-01-01

    Demand and duty factors have been measured for selected equipment (air compressors, electric furnaces, injection molding machines, centrifugal loads, and others) in industrial plants. Demand factors for heavily loaded air ...

  14. MACHINE CONTEST MACHINE VOLUME WORKSHEET

    E-Print Network [OSTI]

    Giles, C. Lee

    MACHINE CONTEST® MACHINE VOLUME WORKSHEET Note: Each square is 1' x 1' (0.3 m x 0.3 m) (Official the footprint of your machine NOTE: If any part of the machine falls within a square, you must count the entire: _______________ (choose one: ft2 or m2 ) STEP 3: Measure the height of your machine. NOTE: The maximum height is 8' (2.4 m

  15. Mobile phone companies sell more batteries than phones to

    E-Print Network [OSTI]

    Starner, Thad E.

    the mobile device's electronics around it. Battery technology is the least likely to change in the 12-month of Technology thad@cc.gatech.edu Wearable Computing Mobisys: 2nd. Int'l Conf. Mobile Systems, ApplicationsMobile phone companies sell more batteries than phones to consumers. The devices users buy gen

  16. : Helmholtz machine estimation .

    E-Print Network [OSTI]

    : Helmholtz machine density estimation . . : . . . (supervised learning) , (active learning) (query learning) [1, 3]. . (unsupervised learning), . , [5]. . Helmholtz machine , . Helmholtz machine : Helmholtz machine [2] . Helmholtz machine (generative network) (recognition network) . , , . Helmholtz machine (self

  17. Financial Policy Manual 1106.6 PLANT ASSETS -EQUIPMENT IN PROCESS

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 1106.6 PLANT ASSETS - EQUIPMENT IN PROCESS Effective: May 2005 for standard items that are altered or customized to make them usable on a project do not qualify as EIP location, tagging contact and phone number, and custodian and phone number. Upon creation, PMG will notify

  18. Electric machine

    DOE Patents [OSTI]

    El-Refaie, Ayman Mohamed Fawzi (Niskayuna, NY); Reddy, Patel Bhageerath (Madison, WI)

    2012-07-17

    An interior permanent magnet electric machine is disclosed. The interior permanent magnet electric machine comprises a rotor comprising a plurality of radially placed magnets each having a proximal end and a distal end, wherein each magnet comprises a plurality of magnetic segments and at least one magnetic segment towards the distal end comprises a high resistivity magnetic material.

  19. Graphics for the Masses: A Hardware Rasterization Architecture for Mobile Phones

    E-Print Network [OSTI]

    typically is one of the most energy-consuming operations, and because mobile phones need to use as little-dimensional graphics in- clude man-machine interfaces (MMIs), screen savers, maps, ani- mated messages, and, naturally more energy which decreases use time on battery charge. It is therefore likely that lower resolutions

  20. Assembly lead time reduction in a semiconductor capital equipment plant through constraint based scheduling

    E-Print Network [OSTI]

    Sedore, Blake William Clark

    2014-01-01

    The assembly protocols for a semiconductor capital equipment machine were analyzed for potential lead time reduction. The objective of this study was to determine the minimum assembly lead time for the machine based on the ...

  1. Do Cell Phones Cause Cancer?

    E-Print Network [OSTI]

    Leikind, Bernard

    2010-01-01

    Do cell phones, household electrical power wiring or appliance, or high voltage power lines cause cancer? Fuggedaboudit! No way! When pigs fly! When I'm the Pope! Don't text while you're driving, however, or eat your cell phone. All organisms absorb microwave radiation directly as thermal energy. In living organisms, the organisms' thermal control systems, including the blood flow, and various cooling mechanisms, such as sweating in humans, that work to maintain a stable body temperature rapidly transfer the absorbed energy to the environment. Any temperature rise is small or even unobserved. Any proposed mechanism by which cell phone radiation might cause cancer must begin with this fact. But the amount of radiation absorbed from a cell phone is less than that produced by normal metabolic processes, and much less than that produced by, for example, exercise. None of these normal metabolic processes cause cancer. Therefore, the much smaller amounts of energy from cell phones doesn't cause cancer either. All f...

  2. Machine therapy

    E-Print Network [OSTI]

    Dobson, Kelly E. (Kelly Elizabeth), 1970-

    2007-01-01

    Machine Therapy is a new practice combining art, design, psychoanalysis, and engineering work in ways that access and reveal the vital, though often unnoticed, relevance of people's interactions and relationships with ...

  3. Mobile phone and my health

    SciTech Connect (OSTI)

    Surducan, Aneta [Nicolae Balcescu High School, 6 Constanta St., 400158 Cluj-Napoca (Romania)] [Nicolae Balcescu High School, 6 Constanta St., 400158 Cluj-Napoca (Romania); Dabala, Dana [National Railways Medical Clinic,, Occupational Medicine Department, 16-20 Republicii St., 400015 Cluj-Napoca (Romania)] [National Railways Medical Clinic,, Occupational Medicine Department, 16-20 Republicii St., 400015 Cluj-Napoca (Romania); Neamtu, Camelia, E-mail: emanoil.surducan@itim-cj.ro; Surducan, Vasile, E-mail: emanoil.surducan@itim-cj.ro; Surducan, Emanoil, E-mail: emanoil.surducan@itim-cj.ro [National Institute for Research and Development of Isotopic and Molecular Technologies, 65-103 Donath St., 400293 Cluj-Napoca (Romania)] [National Institute for Research and Development of Isotopic and Molecular Technologies, 65-103 Donath St., 400293 Cluj-Napoca (Romania)

    2013-11-13

    The interaction of the microwave radiation emitted by mobile phones with the user's body is analyzed from the International Commission on Non-Ionizing Radiation Protection (ICNIRP) recommendations perspective as a correlation between the specific absorption ratio (SAR) of the mobile phone and the call duration. The relative position of the cell phone to the user's body, the dielectric properties of the exposed body parts, the SAR value and the call duration are considered in the local body temperature rise due to the microwave heating effect. The recommended local temperature rise limit in the human body is evaluated according to standards. The aim of this study is to disseminate information to young people, especially high school students, about the microwave thermal effects on the human body, to make them aware of the environmental electromagnetic pollution and to offer them a simple method of biological self protection.

  4. Smart-phone Sensor of Pendulum Motion

    E-Print Network [OSTI]

    Randall D. Peters

    2010-12-08

    Described is an experiment where the embedded accelerometer of a smart-phone was used to study the free decay of a `simple' pendulum to which the phone was attached.

  5. A Generalized Deletion Machine

    E-Print Network [OSTI]

    Indranil Chakrabarty; Satyabrata Adhikari

    2005-11-22

    In this work we prescribe a more generalized quantum-deleting machine (input state dependent). The fidelity of deletion is dependent on some machine parameters such that on alteration of machine parameters we get back to standard deleting machines. We also carried out a various comparative study of various kinds of quantum deleting machines. We also plotted graphs, making a comparative study of fidelity of deletion of the deletion machines, obtained as particular cases on changing the machine parameters of our machine.

  6. VOLUNTEER INFORMATION NAME: ______________________________ Phone #: ______________ Email: ____________________________________

    E-Print Network [OSTI]

    Doty, Sharon Lafferty

    must not do · Jobs using power-driven machines · Jobs with possible exposure to bodily fluids coats), clean-room clothing, or items commonly used in lab classrooms, such as eye protecti

  7. SCHOOL OF DENTISTRY TELEPHONE DIRECTORY Administration Phone Room Human Resources Phone Room

    E-Print Network [OSTI]

    Minnesota, University of

    SCHOOL OF DENTISTRY TELEPHONE DIRECTORY Administration Phone Room Human Resources Phone Room Leon Employee Administrative Support 5-5751 15-136 Janet Campanaro Administrative Support, PASS 5-6950 15

  8. Determining suitable monetization approaches for mobile phone applications within the smart phones industry

    E-Print Network [OSTI]

    Chai, Chengran

    2013-01-01

    Smart Phone Ecosystems revolve around developers, applications and users. One of Nokia's own platforms, the S40, targets the low end of the smart phone market. Nokia's Content & Ecosystem Sourcing group is constantly looking ...

  9. NeuroPhone: Brain-Mobile Phone Interface using a Wireless EEG Headset

    E-Print Network [OSTI]

    Campbell, Andrew T.

    NeuroPhone: Brain-Mobile Phone Interface using a Wireless EEG Headset Andrew T. Campbell, Tanzeem electroencephalo- graphy (EEG) headsets. We demonstrate a brain-controlled address book dialing app, which works on similar princi- ples to P300-speller brain-computer interfaces: the phone flashes a sequence of photos

  10. 2/24/2014 Meet the TinyWindmills That Could Charge Your Phone Someday http://www.kleanindustries.com/s/environmental_market_industry_news.asp?ReportID=619696 1/1

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    | Specialized Tire & Plastic Recycling Equipment | Waste to Energy Technology Supplier ----- Tweet Resources potentially be connected to a phone to gather energy from natural wind or from waving the phone in the air-windmills might be used," Rao said in a statement. 0Like Corporate Info Business Activities Plant Quotations Klean

  11. Roel Wieringa Machine Intelligence

    E-Print Network [OSTI]

    Wieringa, Roel

    Roel Wieringa Machine Intelligence and Explication Rapport nr.IR-129 VRIJE UNIVERSITEITAMSTERDAM Facultei~ Wiskunde en Informatica, De Boelelaan 1081, 1081 HV Amsterdam #12;Machine Intelligence. Machines and explicitness 1.1 Systems, states, and processes 1.2 Machines, Turing machines, computers 1

  12. Course info Machine Learning

    E-Print Network [OSTI]

    Shi, Qinfeng "Javen"

    Course info Machine Learning Real life problems Lecture 1: Machine Learning Problem Qinfeng (Javen) Shi 28 July 2014 Intro. to Stats. Machine Learning COMP SCI 4401/7401 Qinfeng (Javen) Shi Lecture 1: Machine Learning Problem #12;Course info Machine Learning Real life problems Table of Contents I 1 Course

  13. 1/14/14 Teenytinywindmills can recharge phones -Mobile Phone Accessories www.cnet.com.au/teeny-tiny-windmills-can-recharge-phones-339346406.htm 1/5

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    1/14/14 Teenytinywindmills can recharge phones - Mobile Phone Accessories www.cnet.com.au/teeny-tiny-windmills-can-recharge-phones-339346406.htm 1/5 Teeny tiny windmills can recharge phones By Michelle Starr (http. Researchers at the University of Texas, Arlington, have designed a microscopic windmill that, en masse, could

  14. Public Affairs: Phone: (865) 576-9122

    E-Print Network [OSTI]

    -5684 E-mail: allen.schubert@ettp.doe.gov Small Business Program: Karen Reeve, Small Business Program Manager Phone: (865) 576-5643 E-mail: karen.reeve@ettp.doe.gov Website: http://www.ucor.com Public Affairs (Bill) Reis Phone: (865) 241-4859 E-mail: reiswg1@y12.doe.gov Small Business Program: Lisa Copeland

  15. Arduino Drawing Machine Workshop

    E-Print Network [OSTI]

    Arduino Drawing Machine Workshop and Contest Drawing machines are computer at the event and the Arduino drawing machines will be judged on their overall design.stout@gmail.com) Motivation: Arduino and microcontrollers like it have invigorated students, hobbyists

  16. Energy Audit Equipment 

    E-Print Network [OSTI]

    Phillips, J.

    2012-01-01

    The tools (equipment) needed to perform an energy audit include those items which assist the auditor in measuring the energy used by equipment or lost in inefficiency. Each tool is designed for a specific measurement. They can be inexpensive simple...

  17. Power equipment applications

    SciTech Connect (OSTI)

    Seeley, R.S. (Consultant, Bridgewater, NJ (United States))

    1993-11-01

    Many considerations are taken into account in selecting equipment for power projects. The project often becomes a proving ground, benefiting equipment suppliers and developers. In designing and building power generation projects, developers and engineering and construction firms must go through the process of choosing the right equipment for the job. In doing so, a number of considerations regarding the benefits of selection and ease of installation must be taken into account. Understanding the selection process demonstrates how the independent power generation industry becomes a proving ground for different applications of power equipment. In turn, this adds more innovation and versatility to the entire power generation industry. It also provides lenders with examples of proven equipment that will more readily lead to successful financing in the future. Several developers and equipment vendors recently talked about how and why the choices were made for equipment like gas turbines, fluidized bed boilers, water treatment, power cooling equipment, and instruments and controls. 3 figs.

  18. Celestial Mystery Machine

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Celestial Mystery Machine 1663 Los Alamos science and technology magazine Latest Issue:October 2015 past issues All Issues submit Celestial Mystery Machine High-energy gamma...

  19. Quick Start Guide Cisco Small Business Pro IP Phone

    E-Print Network [OSTI]

    Cerveny, Vlastislav

    are using an external power source, insert one end of the power cord into an outlet and insert the other end of the power cord into the power port on the phone body. STEP 7 Connect your phone to the network: · Using to the network and receives a basic configuration, your phone line keys should glow green (on models with phone

  20. Acquisition and analysis of digital evidence in Android Smart phones

    E-Print Network [OSTI]

    Almulhem, Ahmad

    Acquisition and analysis of digital evidence in Android Smart phones By: André Morum de L. Simão phones · Android Platform · Data Acquisition Methods for Android Phones · Examination and analysis · Validation of the proposed method · Conclusion/future work · Questions 2 #12;Abstract · Android phone has

  1. BENCHMARKING THE ACCURACY OF INERTIAL SENSORS IN CELL PHONES

    E-Print Network [OSTI]

    An, Bin

    2012-01-01

    PHONES by Bin An Many ubiquitous computing applications relyfor a variety of ubiquitous computing applications. Perhaps

  2. The myth of cell phone radiation

    E-Print Network [OSTI]

    Natarajan, Vasant

    2012-01-01

    We discuss the purported link between cell phone radiation and cancer. We show that it is inconsistent with the photoelectric effect, and that epidemiological studies of any link have no scientific basis.

  3. The myth of cell phone radiation

    E-Print Network [OSTI]

    Vasant Natarajan

    2013-11-04

    We discuss the purported link between cell-phone radiation and cancer. We show that it is inconsistent with the photoelectric effect, and that epidemiological studies of any link have no scientific basis.

  4. Novel Flux Coupling Machine without Permanent Magnets - U Machine...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Magnets - U Machine Novel Flux Coupling Machine without Permanent Magnets - U Machine 2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer...

  5. Hybrid Quantum Cloning Machine

    E-Print Network [OSTI]

    Satyabrata Adhikari; A. K. Pati; Indranil Chakrabarty; B. S. Choudhury

    2007-06-14

    In this work, we introduce a special kind of quantum cloning machine called Hybrid quantum cloning machine. The introduced Hybrid quantum cloning machine or transformation is nothing but a combination of pre-existing quantum cloning transformations. In this sense it creates its own identity in the field of quantum cloners. Hybrid quantum cloning machine can be of two types: (i) State dependent and (ii) State independent or Universal. We study here the above two types of Hybrid quantum cloning machines. Later we will show that the state dependent hybrid quantum-cloning machine can be applied on only four input states. We will also find in this paper another asymmetric universal quantum cloning machine constructed from the combination of optimal universal B-H quantum cloning machine and universal anti-cloning machine. The fidelities of the two outputs are different and their values lie in the neighborhood of ${5/6} $

  6. Advanced monitoring of machining operations

    E-Print Network [OSTI]

    Teti, Roberto; Jemielniak, Krzysztof; O'Donnell, Garret; Dornfeld, David

    2010-01-01

    ultra-precision micro-milling machine. 5.2. Chip conditionssensor embedded in the milling machine was investigated (ups with diverse milling machines, toolings, sensor systems

  7. Means and method of balancing multi-cylinder reciprocating machines

    DOE Patents [OSTI]

    Corey, John A. (North Troy, NY); Walsh, Michael M. (Schenectady, NY)

    1985-01-01

    A virtual balancing axis arrangement is described for multi-cylinder reciprocating piston machines for effectively balancing out imbalanced forces and minimizing residual imbalance moments acting on the crankshaft of such machines without requiring the use of additional parallel-arrayed balancing shafts or complex and expensive gear arrangements. The novel virtual balancing axis arrangement is capable of being designed into multi-cylinder reciprocating piston and crankshaft machines for substantially reducing vibrations induced during operation of such machines with only minimal number of additional component parts. Some of the required component parts may be available from parts already required for operation of auxiliary equipment, such as oil and water pumps used in certain types of reciprocating piston and crankshaft machine so that by appropriate location and dimensioning in accordance with the teachings of the invention, the virtual balancing axis arrangement can be built into the machine at little or no additional cost.

  8. Machine-Learning for Big Data: Sampling and Distributed On-Line Algorithms

    E-Print Network [OSTI]

    Combettes, Patrick Louis

    Machine-Learning for Big Data: Sampling and Distributed On-Line Algorithms Stéphan Clémençon LTCI variance control: rate faster than n 1/2 3 Convex risk minimization 4 Oracle inequalities #12;Big Data? Big phones, internet, embedded systems, social networks, . . .) · to store and manage Big (and Complex) Data

  9. Shop Safety -Machine Shop Hazards, Machine Tool

    E-Print Network [OSTI]

    materials (oily rags, paper,...) away from source of heat. Know where the fire extinguishers are located side if using a file on revolving work. Guard all transmission parts. Use a brush to remove chips ­ Machine Shop Milling Machine (Continued) Guard all transmission parts. Clean up oil spots

  10. Applications of Artificial Neural Networks (ANNs) to Rotating Equipment

    E-Print Network [OSTI]

    Sainudiin, Raazesh

    , automotive, banking, defense, electronics, finance, insurance, manufacturing, medicine, oil and gas, robotics a vital role in oil and power industries. In spite of all research which has been carried out so far equipment, rotating machine, oil and power industry 1-PhD Candidate 2-Professor, Director of Mechatronics

  11. DRILLING MACHINES GENERAL INFORMATION

    E-Print Network [OSTI]

    Gellman, Andrew J.

    TC 9-524 Chapter 4 DRILLING MACHINES GENERAL INFORMATION PURPOSE This chapter contains basic information pertaining to drilling machines. A drilling machine comes in many shapes and sizes, from small hand-held power drills to bench mounted and finally floor-mounted models. They can perform operations

  12. Early Equipment Management

    E-Print Network [OSTI]

    Schlie, Michelle

    2007-05-18

    Installed .................................................40 Exhibit 11: 400 Gallon Tank and K-Tron Feeder................................................42 Exhibit 12: Cardboard Box Layout of First Floor Equipment ..............................43... Exhibit 13: Continuous Mixer .............................................................................43 Exhibit 14: Gantry Palletizer...............................................................................44 Page 4 Acknowledgements I...

  13. IPA: improved phone modelling with recurrent neural networks 

    E-Print Network [OSTI]

    Robinson, Tony; Hochberg, Mike; Renals, Steve

    This paper describes phone modelling improvements to the hybrid connectionist-hidden Markov model speech recognition system developed at Cambridge University. These improvements are applied to phone recognition from the ...

  14. Laboratory Equipment Donation Program - Equipment List

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousand CubicResourcelogo and masthead Berkeley LablooksEquipment List

  15. Prof. Roger Wattenhofer phone +41 44 632 6312

    E-Print Network [OSTI]

    contact us by email or phone. Advisors Philipp Sommer sommer@tik.ee.ethz.ch 044 632 7838 Roland Flury

  16. Smart-Phone Attacks and Defenses Chuanxiong Guo

    E-Print Network [OSTI]

    Wang, Bing

    Smart-Phone Attacks and Defenses Chuanxiong Guo xguo@ieee.org Microsoft Research Helen J. Wang smart-phones), and our environment (e.g., through the use of sensors, actuators, and RFIDs). While is becoming a reality: Smart-phones, interoperable between the telecom networks and the Inter- net

  17. art Phones ha versity of Wa

    E-Print Network [OSTI]

    nformation st ly to the partic ormation, con ontact. For ins he smart phon y Risk Ad tion Settin a well should pe or erase its row (for exam e. This can be ge, or through a good idea to phone has "se e

  18. Energy deposition update Front End phone meeting

    E-Print Network [OSTI]

    McDonald, Kirk

    Energy deposition update P. Snopok Front End phone meeting March 31, 2015 #12;MARS · Modified geometry is strongly desired · Energy change is via RF kick at the center of the cavity ­ MARS invokes in ICOOL/G4beamline · How thick the beampipe and shielding around (if any) should be ­ energy deposition

  19. Business Administrators Departments Business Administrator Phone Email

    E-Print Network [OSTI]

    Sharp, Kim

    Business Administrators Departments Business Administrator Phone Email Anesthesiology and Critical@mail.med.upenn.edu Cancer Biology James Riley 746-5520 jriley@upenn.edu Cell & Developmental Biology Tracey Longs 898@mail.med.upenn.edu Psychiatry Rosellen Taraborrelli 662-2899 taraborr@mail.med.upenn.edu Radiation Oncology Susan Niskey Popp

  20. Health Care Buildings: Equipment Table

    U.S. Energy Information Administration (EIA) Indexed Site

    Equipment Table Buildings, Size and Age Data by Equipment Types for Health Care Buildings Number of Buildings (thousand) Percent of Buildings Floorspace (million square feet)...

  1. Machine tool locator

    DOE Patents [OSTI]

    Hanlon, John A. (Los Alamos, NM); Gill, Timothy J. (Stanley, NM)

    2001-01-01

    Machine tools can be accurately measured and positioned on manufacturing machines within very small tolerances by use of an autocollimator on a 3-axis mount on a manufacturing machine and positioned so as to focus on a reference tooling ball or a machine tool, a digital camera connected to the viewing end of the autocollimator, and a marker and measure generator for receiving digital images from the camera, then displaying or measuring distances between the projection reticle and the reference reticle on the monitoring screen, and relating the distances to the actual position of the autocollimator relative to the reference tooling ball. The images and measurements are used to set the position of the machine tool and to measure the size and shape of the machine tool tip, and examine cutting edge wear. patent

  2. Equipment Operational Requirements

    SciTech Connect (OSTI)

    Greenwalt, B; Henderer, B; Hibbard, W; Mercer, M

    2009-06-11

    The Iraq Department of Border Enforcement is rich in personnel, but poor in equipment. An effective border control system must include detection, discrimination, decision, tracking and interdiction, capture, identification, and disposition. An equipment solution that addresses only a part of this will not succeed, likewise equipment by itself is not the answer without considering the personnel and how they would employ the equipment. The solution should take advantage of the existing in-place system and address all of the critical functions. The solutions are envisioned as being implemented in a phased manner, where Solution 1 is followed by Solution 2 and eventually by Solution 3. This allows adequate time for training and gaining operational experience for successively more complex equipment. Detailed descriptions of the components follow the solution descriptions. Solution 1 - This solution is based on changes to CONOPs, and does not have a technology component. It consists of observers at the forts and annexes, forward patrols along the swamp edge, in depth patrols approximately 10 kilometers inland from the swamp, and checkpoints on major roads. Solution 2 - This solution adds a ground sensor array to the Solution 1 system. Solution 3 - This solution is based around installing a radar/video camera system on each fort. It employs the CONOPS from Solution 1, but uses minimal ground sensors deployed only in areas with poor radar/video camera coverage (such as canals and streams shielded by vegetation), or by roads covered by radar but outside the range of the radar associated cameras. This document provides broad operational requirements for major equipment components along with sufficient operational details to allow the technical community to identify potential hardware candidates. Continuing analysis will develop quantities required and more detailed tactics, techniques, and procedures.

  3. Quantum Learning Machine

    E-Print Network [OSTI]

    Jeongho Bang; James Lim; M. S. Kim; Jinhyoung Lee

    2008-03-31

    We propose a novel notion of a quantum learning machine for automatically controlling quantum coherence and for developing quantum algorithms. A quantum learning machine can be trained to learn a certain task with no a priori knowledge on its algorithm. As an example, it is demonstrated that the quantum learning machine learns Deutsch's task and finds itself a quantum algorithm, that is different from but equivalent to the original one.

  4. Emergency Facilities and Equipment

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-08-21

    This volume clarifies requirements of DOE O 151.1 to ensure that emergency facilities and equipment are considered as part of emergency management program and that activities conducted at these emergency facilities are fully integrated. Canceled by DOE G 151.1-4.

  5. Diamond machine tool face lapping machine

    DOE Patents [OSTI]

    Yetter, H.H.

    1985-05-06

    An apparatus for shaping, sharpening and polishing diamond-tipped single-point machine tools. The isolation of a rotating grinding wheel from its driving apparatus using an air bearing and causing the tool to be shaped, polished or sharpened to be moved across the surface of the grinding wheel so that it does not remain at one radius for more than a single rotation of the grinding wheel has been found to readily result in machine tools of a quality which can only be obtained by the most tedious and costly processing procedures, and previously unattainable by simple lapping techniques.

  6. No calculators, cell phones, PDAs, or other personal electronic equipment is allowed during exams

    E-Print Network [OSTI]

    Houston, Paul L.

    and Sampling Theory (Appendix A) Practical Electronics (Chapters 2-4) Signal to Noise Enhancement Techniques of MTBE, Octane, and BTEX in Gasoline by GC/MS *in addition to the handout prior to coming to lab

  7. Stirling machine operating experience

    SciTech Connect (OSTI)

    Ross, B.; Dudenhoefer, J.E.

    1994-09-01

    Numerous Stirling machines have been built and operated, but the operating experience of these machines is not well known. It is important to examine this operating experience in detail, because it largely substantiates the claim that stirling machines are capable of reliable and lengthy operating lives. The amount of data that exists is impressive, considering that many of the machines that have been built are developmental machines intended to show proof of concept, and are not expected to operate for lengthy periods of time. Some Stirling machines (typically free-piston machines) achieve long life through non-contact bearings, while other Stirling machines (typically kinematic) have achieved long operating lives through regular seal and bearing replacements. In addition to engine and system testing, life testing of critical components is also considered. The record in this paper is not complete, due to the reluctance of some organizations to release operational data and because several organizations were not contacted. The authors intend to repeat this assessment in three years, hoping for even greater participation.

  8. On parallel machine scheduling 1

    E-Print Network [OSTI]

    Magdeburg, Universität

    On parallel machine scheduling 1 machines with setup times. The setup has to be performed by a single server. The objective is to minimize even for the case of two identical parallel machines. This paper presents a pseudopolynomial

  9. Roof bolting equipment & technology

    SciTech Connect (OSTI)

    Fiscor, S.

    2009-04-15

    Technology provides an evaluator path to improvement for roof bolting machines. Bucyrus offers three different roof bolts models for various mining conditions. The LRB-15 AR is a single-arm boiler recommended for ranges of 32 inches and above; the dual-arm RB2-52A for ranges of 42 inches and above; and the dual-arm RB2-88A for ranges of 54 inches and above. Design features are discussed in the article. Developments in roof bolting technology by Joy Mining Machinery are reported. 4 photos.

  10. Equipment | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submitKansasCommunitiesof Energy ServicesEnergy4th Quarter 2012100 tonMachine

  11. Laser alignment of rotating equipment at PNL

    SciTech Connect (OSTI)

    Berndt, R.H.

    1994-05-01

    Lateral vibration in direct-drive equipment is usually caused by misalignment. Over the years, because of the need to improve on techniques and ways of working more efficiently, various types of alignment methods have evolved. In the beginning, craftsmen used a straight-edge scale across the coupling with a feeler gauge measuring the misalignment error. This is still preferred today for aligning small couplings. The industry has since decided that alignment of large direct-drive equipment needed a more accurate type of instrumentation. Rim and face is another of the first alignment methods and is used on all sizes of equipment. A disadvantage of the rim and face method is that in most cases the coupling has to be disassembled. This can cause alignment problems when the coupling is reassembled. Also, the rim and face method is not fast enough to work satisfactorily on alignment of thermally hot equipment. Another concern is that the coupling has to be manufactured accurately for correct rim and face readings. Reverse dial alignment is an improvement over the rim and face method, and depending on the operator`s experience, this method can be very accurate. A good training program along with field experience will bring the operator to a proper level of proficiency for a successful program. A hand-held computer with reverse dial calculations in memory is a must for job efficiency. An advantage over the rim and face method is that the coupling is not disassembled and remains locked together. Reverse dial instrumentation measures from both shaft center lines, rather than the coupling surface so the machining of the coupling during manufacture is not a major concern.

  12. Universal Developer Platform for MachinePlatform for Machine

    E-Print Network [OSTI]

    1 Universal Developer Platform for MachinePlatform for Machine Control Applications Hansjoerg will need some things: · Senses · Means June 24-26, 2008 ETH Zurich #12;2 And for Machine Control? June 24 ETH Zurich Conclusion: big effort for things that have little to do with Machine Control Multi

  13. China production equipment sourcing strategy

    E-Print Network [OSTI]

    Chouinard, Natalie, 1979-

    2009-01-01

    This thesis recommends a China business and equipment strategy for the Controls Conveyor Robotics Welding (CCRW) group at General Motors. The current strategy is to use globally common equipment through predetermined global ...

  14. Lightweight social communication using visual media and mobile phones

    E-Print Network [OSTI]

    Cowan, Lisa G.

    2011-01-01

    implications. Personal and Ubiquitous Computing, 2011. [33]Journal of Personal and Ubiquitous Computing, 2011. Cowan,mobile phones. Personal and Ubiquitous Computing, 4:134–143,

  15. The economics of cell phone reuse and recycling

    E-Print Network [OSTI]

    Geyer, Roland; Doctori Blass, Vered

    2010-01-01

    usually reflect the level of reprocessing that is involved.a substantial level of reprocessing. Reuse is the generictowards no or little reprocessing. Cell phone reuse Int J

  16. Machine Translation for Twitter 

    E-Print Network [OSTI]

    Jehl, Laura Elisabeth

    2010-11-24

    We carried out a study in which we explored the feasibility of machine translation for Twitter for the language pair English and German. As a first step we created a small bilingual corpus of 1,000 tweets. Using this ...

  17. MACHINE AND FOUNDRY COMPANY

    Office of Legacy Management (LM)

    MACHINE AND FOUNDRY COMPANY kt '- : :' ENGINEERING DIVISIOJ ---. Cl FIELD iRIP ,REP@?T ,' i;:z;zy MEETING REPORT : .I.-.-' Y ::,:I :. &, .I7 ENGINEERING REPORT- : T, ...

  18. Machine For Grinding Fog

    E-Print Network [OSTI]

    Ward, Nicholas Adam

    2010-04-30

    Machine For Grinding Fog, an exhibition of stop motion animated films, revolves around three primary concerns: relationships, psychological or subjective reality, and relativity. Rooted within concerns of faith, personal ethics, and a re...

  19. Design of Vitrification Machine

    E-Print Network [OSTI]

    McDonald, Todd William

    2009-11-30

    and unreliable process. Moreover, there is a lack of standardization in the methods for preparing cells and biological material for the vitrification process. The purpose of the Vitrification Machine is to greatly simplify the process by making it faster, more...

  20. UNIRIB: Equipment Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout /Two0 - 19 Publications 1. Xie, Z.; Ma, L.;1Equipment

  1. A Case for Leveraging 802.11p for Direct Phone-to-Phone Communications

    E-Print Network [OSTI]

    Choi, Pilsoon

    WiFi cannot effectively handle the demands of device-to-device communication between phones, due to insufficient range and poor reliability. We make the case for using IEEE 802.11p DSRC instead, which has been adopted for ...

  2. Property:Phone | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo,AltFuelVehicle2FlatDemandMonth3 Jump to: navigation, searchPhone Jump to: navigation,

  3. Sealing intersecting vane machines

    DOE Patents [OSTI]

    Martin, Jedd N.; Chomyszak, Stephen M.

    2005-06-07

    The invention provides a toroidal intersecting vane machine incorporating intersecting rotors to form primary and secondary chambers whose porting configurations minimize friction and maximize efficiency. Specifically, it is an object of the invention to provide a toroidal intersecting vane machine that greatly reduces the frictional losses through intersecting surfaces without the need for external gearing by modifying the width of one or both tracks at the point of intermeshing. The inventions described herein relate to these improvements.

  4. Sealing intersecting vane machines

    DOE Patents [OSTI]

    Martin, Jedd N. (Providence, RI); Chomyszak, Stephen M. (Attleboro, MA)

    2007-06-05

    The invention provides a toroidal intersecting vane machine incorporating intersecting rotors to form primary and secondary chambers whose porting configurations minimize friction and maximize efficiency. Specifically, it is an object of the invention to provide a toroidal intersecting vane machine that greatly reduces the frictional losses through intersecting surfaces without the need for external gearing by modifying the width of one or both tracks at the point of intermeshing. The inventions described herein relate to these improvements.

  5. Human-machine interactions

    DOE Patents [OSTI]

    Forsythe, J. Chris (Sandia Park, NM); Xavier, Patrick G. (Albuquerque, NM); Abbott, Robert G. (Albuquerque, NM); Brannon, Nathan G. (Albuquerque, NM); Bernard, Michael L. (Tijeras, NM); Speed, Ann E. (Albuquerque, NM)

    2009-04-28

    Digital technology utilizing a cognitive model based on human naturalistic decision-making processes, including pattern recognition and episodic memory, can reduce the dependency of human-machine interactions on the abilities of a human user and can enable a machine to more closely emulate human-like responses. Such a cognitive model can enable digital technology to use cognitive capacities fundamental to human-like communication and cooperation to interact with humans.

  6. Metalworking and machining fluids

    DOE Patents [OSTI]

    Erdemir, Ali (Naperville, IL); Sykora, Frank (Caledon, ON, CA); Dorbeck, Mark (Brighton, MI)

    2010-10-12

    Improved boron-based metal working and machining fluids. Boric acid and boron-based additives that, when mixed with certain carrier fluids, such as water, cellulose and/or cellulose derivatives, polyhydric alcohol, polyalkylene glycol, polyvinyl alcohol, starch, dextrin, in solid and/or solvated forms result in improved metalworking and machining of metallic work pieces. Fluids manufactured with boric acid or boron-based additives effectively reduce friction, prevent galling and severe wear problems on cutting and forming tools.

  7. Doubly fed induction machine

    DOE Patents [OSTI]

    Skeist, S. Merrill; Baker, Richard H.

    2005-10-11

    An electro-mechanical energy conversion system coupled between an energy source and an energy load including an energy converter device having a doubly fed induction machine coupled between the energy source and the energy load to convert the energy from the energy source and to transfer the converted energy to the energy load and an energy transfer multiplexer coupled to the energy converter device to control the flow of power or energy through the doubly fed induction machine.

  8. Harvesting Machine Census 1999 & 2001

    E-Print Network [OSTI]

    1 Harvesting Machine Census 1999 & 2001 231 Corstorphine Road Edinburgh EH12 7AT www.forestry.gov.uk FCTN001 SUMMARY This Technical Note contains information on the 1999 and 2001 harvesting machine machines, converted forwarders, etc., account for the remaining machines. In the 2001 census, 65

  9. WISKUNNEND WISKE DE MEESTERLIJKE MACHINE

    E-Print Network [OSTI]

    Goelzer, Heiko

    WISKUNNEND WISKE DE MEESTERLIJKE MACHINE ©2013,StandaardUitgeverij,Antwerpen,België Lara werkt studio een machine die pagina's kan sorteren op één van de 5 gecodeerde cijfers: wanneer je de machine bv ingestelde plaats hetzelfde cijfer hebben, dan behoudt de machine hun onderlinge volgorde. a) Help Lara met

  10. Visualizing criminal networks reconstructed from mobile phone records

    E-Print Network [OSTI]

    Ferrara, Emilio

    Visualizing criminal networks reconstructed from mobile phone records Emilio Ferrara School and the organization of criminal networks is of fundamental importance for both the investi- gations informative sources includ- ing the records of phone traffic, the social networks, surveil- lance data

  11. MOBILE PHONE USE AND TEMPORAL SKIN HEAT SENSATION

    E-Print Network [OSTI]

    Boyer, Edmond

    in the phone by the battery currents and running of the radiofrequency (RF) electronic circuits measured the temperature of the temporal skin due to GSM 1800 MHz MP radiated power (125 mW). We suppressed of the heat produced in the phone by the battery currents and running of the radiofrequency (RF) electronic

  12. Using mobile phone contextual information to facilitate managing image collections

    E-Print Network [OSTI]

    -awareness, metadata, image collections, mobile phones, embedded sensors INTRODUCTION Personal information management@gmail.com ABSTRACT In this paper, we describe a prototype application that utilizes the embedded sensors in advanced information management. We hypothesize that information inferred from embedded mobile phone sensors can offer

  13. Remote controlling an autonomous car with an iPhone

    E-Print Network [OSTI]

    Rojas, Raúl

    Remote controlling an autonomous car with an iPhone Miao Wang, Tinosch Ganjineh B-10-02 March 2010 #12;Remote controlling an autonomous car with an iPhone Miao Wang, Tinosch Ganjineh Free University" is a com- pletely autonomous car developed by the Free University of Berlin which is capable of unmanned

  14. Technology uses micro-windmills to recharge cell phones

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    Technology uses micro-windmills to recharge cell phones A micro-windmill is pictured on the face designed a micro-windmill that generates wind energy and may become an innovative solution to cell phone batteries constantly in need of recharging and home energy generation where large windmills

  15. Teeny tiny windmills could recharge phones Share it now!

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    Teeny tiny windmills could recharge phones Green Tech Share it now! 0 One of the tiny windmills. Portfolio Markets Trending Stories Trending Stocks Sector Chat Page 1 of 6Teeny tiny windmills could recharge phones | VantageWire 2/1/2014http://www.vantagewire.com/2014/01/teeny-tiny-windmills

  16. The Dark Side of Mobile Phones August 3, 2010

    E-Print Network [OSTI]

    Carlini, David

    is convenient, but often makes for a poor nutritional choice. Deep-water rigs increase the world's access to oil, using cross-cultural data. To situate the study within the larger field of mobile phone research, we begin with a brief overview of mobile telephony in historical and social context. Mobile Phones

  17. Transportation Equipment (2010 MECS) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Equipment (2010 MECS) Transportation Equipment (2010 MECS) Manufacturing Energy and Carbon Footprint for Transportation Equipment Sector (NAICS 336) Energy use data source:...

  18. Extreme ultraviolet lithography machine

    DOE Patents [OSTI]

    Tichenor, Daniel A. (Castro Valley, CA); Kubiak, Glenn D. (Livermore, CA); Haney, Steven J. (Tracy, CA); Sweeney, Donald W. (San Ramon, CA)

    2000-01-01

    An extreme ultraviolet lithography (EUVL) machine or system for producing integrated circuit (IC) components, such as transistors, formed on a substrate. The EUVL machine utilizes a laser plasma point source directed via an optical arrangement onto a mask or reticle which is reflected by a multiple mirror system onto the substrate or target. The EUVL machine operates in the 10-14 nm wavelength soft x-ray photon. Basically the EUV machine includes an evacuated source chamber, an evacuated main or project chamber interconnected by a transport tube arrangement, wherein a laser beam is directed into a plasma generator which produces an illumination beam which is directed by optics from the source chamber through the connecting tube, into the projection chamber, and onto the reticle or mask, from which a patterned beam is reflected by optics in a projection optics (PO) box mounted in the main or projection chamber onto the substrate. In one embodiment of a EUVL machine, nine optical components are utilized, with four of the optical components located in the PO box. The main or projection chamber includes vibration isolators for the PO box and a vibration isolator mounting for the substrate, with the main or projection chamber being mounted on a support structure and being isolated.

  19. Scalable System Design for Assisted Recall: Leveraging everyday mobile phones and web services

    E-Print Network [OSTI]

    Kim, Donnie; Peterson, Nicolai M; Kim, Joe; Tabrizi, Haleh; Burke, Jeffrey A; Estrin, D

    2007-01-01

    everyday mobile phones and web services Donnie Kim, Nicolaimobile phones and web services we b Pursuing an architecturerepeated images Using web services interface for flexible/

  20. Blind quantum machine learning

    E-Print Network [OSTI]

    Yu-Bo Sheng; Lan Zhou

    2015-07-26

    Blind quantum machine learning (BQML) enables a classical client with little quantum technology to delegate a remote quantum machine learning to the quantum server in such a approach that the privacy data is preserved. Here we propose the first BQML protocol that the client can classify two-dimensional vectors to different clusters, resorting to a remote small-scale photon quantum computation processor. During the protocol, the client is only required to rotate and measure the single qubit. The protocol is secure without leaking any relevant information to the Eve. Any eavesdropper who attempts to intercept and disturb the learning process can be noticed. In principle, this protocol can be used to classify high dimensional vectors and may provide a new viewpoint and application for quantum machine learning.

  1. Micro-machined resonator

    DOE Patents [OSTI]

    Godshall, N.A.; Koehler, D.R.; Liang, A.Y.; Smith, B.K.

    1993-03-30

    A micro-machined resonator, typically quartz, with upper and lower micro-machinable support members, or covers, having etched wells which may be lined with conductive electrode material, between the support members is a quartz resonator having an energy trapping quartz mesa capacitively coupled to the electrode through a diaphragm; the quartz resonator is supported by either micro-machined cantilever springs or by thin layers extending over the surfaces of the support. If the diaphragm is rigid, clock applications are available, and if the diaphragm is resilient, then transducer applications can be achieved. Either the thin support layers or the conductive electrode material can be integral with the diaphragm. In any event, the covers are bonded to form a hermetic seal and the interior volume may be filled with a gas or may be evacuated. In addition, one or both of the covers may include oscillator and interface circuitry for the resonator.

  2. Intersecting vane machines

    DOE Patents [OSTI]

    Bailey, H. Sterling; Chomyszak, Stephen M.

    2007-01-16

    The invention provides a toroidal intersecting vane machine incorporating intersecting rotors to form primary and secondary chambers whose porting configurations minimize friction and maximize efficiency. Specifically, it is an object of the invention to provide a toroidal intersecting vane machine that greatly reduces the frictional losses through meshing surfaces without the need for external gearing by modifying the function of one or the other of the rotors from that of "fluid moving" to that of "valving" thereby reducing the pressure loads and associated inefficiencies at the interface of the meshing surfaces. The inventions described herein relate to these improvements.

  3. Automated fiber pigtailing machine

    DOE Patents [OSTI]

    Strand, O.T.; Lowry, M.E.

    1999-01-05

    The Automated Fiber Pigtailing Machine (AFPM) aligns and attaches optical fibers to optoelectronic (OE) devices such as laser diodes, photodiodes, and waveguide devices without operator intervention. The so-called pigtailing process is completed with sub-micron accuracies in less than 3 minutes. The AFPM operates unattended for one hour, is modular in design and is compatible with a mass production manufacturing environment. This machine can be used to build components which are used in military aircraft navigation systems, computer systems, communications systems and in the construction of diagnostics and experimental systems. 26 figs.

  4. Precision Robotic Assembly Machine

    ScienceCinema (OSTI)

    None

    2010-09-01

    The world's largest laser system is the National Ignition Facility (NIF), located at Lawrence Livermore National Laboratory. NIF's 192 laser beams are amplified to extremely high energy, and then focused onto a tiny target about the size of a BB, containing frozen hydrogen gas. The target must be perfectly machined to incredibly demanding specifications. The Laboratory's scientists and engineers have developed a device called the "Precision Robotic Assembly Machine" for this purpose. Its unique design won a prestigious R&D-100 award from R&D Magazine.

  5. Automated fiber pigtailing machine

    DOE Patents [OSTI]

    Strand, Oliver T. (Castro Valley, CA); Lowry, Mark E. (Castro Valley, CA)

    1999-01-01

    The Automated Fiber Pigtailing Machine (AFPM) aligns and attaches optical fibers to optoelectonic (OE) devices such as laser diodes, photodiodes, and waveguide devices without operator intervention. The so-called pigtailing process is completed with sub-micron accuracies in less than 3 minutes. The AFPM operates unattended for one hour, is modular in design and is compatible with a mass production manufacturing environment. This machine can be used to build components which are used in military aircraft navigation systems, computer systems, communications systems and in the construction of diagnostics and experimental systems.

  6. COMPILER FOR TINY REGISTER MACHINE 

    E-Print Network [OSTI]

    Wu, Sidian

    2014-09-20

    The remarkable development of embedded computing devices in the past few decades has greatly improved the computing ability of our embedded and mobile devices. Mobile phones, for example, have developed from simple telephony and messaging devices...

  7. State machine replication for wide area networks

    E-Print Network [OSTI]

    Mao, Yanhua

    2010-01-01

    state machine . . . . . . . . . . . . . . . . . . 2.4 FLP5.3.3 P: A simple state machine . . . . . . 5.3.4performance metrics of state machine R compared to consensus

  8. Automated energy monitoring of machine tools

    E-Print Network [OSTI]

    Vijayaraghavan, Athulan; Dornfeld, David

    2010-01-01

    of Precision Machine Tools Under Varied Cutting Conditions,DA (2008) Improving Machine Tool Interoperability usingenergy monitoring of machine tools A. Vijayaraghavan a , D.

  9. Automated energy monitoring of machine tools

    E-Print Network [OSTI]

    Vijayaraghavan, Athulan; Dornfeld, David

    2010-01-01

    in a 3- axis precision milling machine. The simulated pro?lea Mori Seiki NV1500 DCG milling machine by the Machine Tool

  10. INL '@work' heavy equipment mechanic

    SciTech Connect (OSTI)

    Christensen, Cad

    2008-01-01

    INL's Cad Christensen is a heavy equipment mechanic. For more information about INL careers, visit http://www.facebook.com/idahonationallaboratory.

  11. INL '@work' heavy equipment mechanic

    ScienceCinema (OSTI)

    Christensen, Cad

    2013-05-28

    INL's Cad Christensen is a heavy equipment mechanic. For more information about INL careers, visit http://www.facebook.com/idahonationallaboratory.

  12. Talking Vending Machines

    E-Print Network [OSTI]

    Hacker, Randi

    2011-02-02

    read your demographic and make recommendations based on market research. For a man, the machine will suggest a caffeine drink unless he's over 50 then it's green tea. A woman of 20, will be invited to buy a sweetened drink. Recommendations change...

  13. Pavement Recycling Machine 

    E-Print Network [OSTI]

    Raiford Stripling Associates, Inc.; Stripling, Raiford L.

    2011-08-29

    Detailed field measurements of energy consumption (kWh) and demand (kW) are conducted on two injection molding machines (IMMs) used in a typical plastic manufacturing facility in the San Francisco Bay Area, with/without Variable Frequency Drives...

  14. Operating the Lisp Machine

    E-Print Network [OSTI]

    Moon, David A.

    This document is a draft copy of a portion of the Lisp Machine window system manual. It is being published in this form now to make it available, since the complete window system manual is unlikely to be finished in the ...

  15. Laser machining of explosives

    DOE Patents [OSTI]

    Perry, Michael D. (Livermore, CA); Stuart, Brent C. (Fremont, CA); Banks, Paul S. (Livermore, CA); Myers, Booth R. (Livermore, CA); Sefcik, Joseph A. (Tracy, CA)

    2000-01-01

    The invention consists of a method for machining (cutting, drilling, sculpting) of explosives (e.g., TNT, TATB, PETN, RDX, etc.). By using pulses of a duration in the range of 5 femtoseconds to 50 picoseconds, extremely precise and rapid machining can be achieved with essentially no heat or shock affected zone. In this method, material is removed by a nonthermal mechanism. A combination of multiphoton and collisional ionization creates a critical density plasma in a time scale much shorter than electron kinetic energy is transferred to the lattice. The resulting plasma is far from thermal equilibrium. The material is in essence converted from its initial solid-state directly into a fully ionized plasma on a time scale too short for thermal equilibrium to be established with the lattice. As a result, there is negligible heat conduction beyond the region removed resulting in negligible thermal stress or shock to the material beyond a few microns from the laser machined surface. Hydrodynamic expansion of the plasma eliminates the need for any ancillary techniques to remove material and produces extremely high quality machined surfaces. There is no detonation or deflagration of the explosive in the process and the material which is removed is rendered inert.

  16. MACHINE LEARNING REINFORCEMENT LEARNING

    E-Print Network [OSTI]

    Fleuret, François

    only on the current state. 7 / 54 Policy Example For instance, in the maze, here is a policy (an, etc. 2 / 54 #12;Reinforcement Learning Introduction We have seen two large families of machine case, since we have to explore the environment to collect the samples to learn. 3 / 54 Introduction

  17. Lisp Machine Choice Facilities

    E-Print Network [OSTI]

    Moon, David A.

    This document is a draft copy of a portion of the Lisp Machine window system manual. It is being published in this form now to make it available, since the complete window system manual is unlikely to be finished in the ...

  18. On-machine 3D vision system for machining setup modeling

    E-Print Network [OSTI]

    Zhang, Xi; Tian, Xiaodong; Yamazaki, Kazuo

    2010-01-01

    3 ORIGINAL ARTICLE On-machine 3D vision system for machiningIn computer numerical control machine tools, using machiningIn this paper, an on-machine vision system is presented to

  19. MERIT Equipment MERIT Video Conference

    E-Print Network [OSTI]

    McDonald, Kirk

    of Energy MERIT Equipment Dismantlement 1 Sept 2010 #12;What's Left · Hydraulic Power Unit (HPU disposal Sept 2010 (estimated) 2 Managed by UT-Battelle for the U.S. Department of Energy MERIT Equipment secondary containmentco ta e t · Hydraulic fluid drained & cylinders removed& cy de s e o ed 3 Managed by UT

  20. The Fusion Machine (extended abstract)

    E-Print Network [OSTI]

    Gardner, Philippa

    The Fusion Machine (extended abstract) Philippa Gardner Cosimo Laneve Lucian Wischik March 27, 2002. In particular, we describe a dis- tributed abstract machine called the fusion machine. In it, only channels exist at runtime. It uses a form of concurrent constraints called fusions--equations on channel names

  1. Information technology equipment cooling method

    DOE Patents [OSTI]

    Schultz, Mark D.

    2015-10-20

    According to one embodiment, a system for removing heat from a rack of information technology equipment may include a sidecar indoor air to liquid heat exchanger that cools air utilized by the rack of information technology equipment to cool the rack of information technology equipment. The system may also include a liquid to liquid heat exchanger and an outdoor heat exchanger. The system may further include configurable pathways to connect and control fluid flow through the sidecar heat exchanger, the liquid to liquid heat exchanger, the rack of information technology equipment, and the outdoor heat exchanger based upon ambient temperature and/or ambient humidity to remove heat generated by the rack of information technology equipment.

  2. Robotics Learning Center Milling Machine Operation Manual

    E-Print Network [OSTI]

    Miller, Damon A.

    Robotics Learning Center Milling Machine Operation Manual Ken Gruel, Dr. Massood Atashbar, RyanMaster.............................................................................................................. 16 6. Milling Machine Operation for the operation of the LPKF® milling machine, and then gives an overview of the physical operation of the machine

  3. Holographic Labeling And Reading Machine For Authentication And Security Appications

    DOE Patents [OSTI]

    Weber, David C. (Rancho Santa Margarita, CA); Trolinger, James D. (Costa Mesa, CA)

    1999-07-06

    A holographic security label and automated reading machine for marking and subsequently authenticating any object such as an identification badge, a pass, a ticket, a manufactured part, or a package is described. The security label is extremely difficult to copy or even to read by unauthorized persons. The system comprises a holographic security label that has been created with a coded reference wave, whose specification can be kept secret. The label contains information that can be extracted only with the coded reference wave, which is derived from a holographic key, which restricts access of the information to only the possessor of the key. A reading machine accesses the information contained in the label and compares it with data stored in the machine through the application of a joint transform correlator, which is also equipped with a reference hologram that adds additional security to the procedure.

  4. A Cognitive Phased Array Using Smart Phone Control 

    E-Print Network [OSTI]

    Jensen, Jeffrey

    2012-07-16

    , but utilizes the phone's internal sensors as an enhancement to generate beam direction information, Bluetooth channel to relay information to control circuitry, and Global Position System (GPS) to track an object in motion. The research and experiments...

  5. Understanding energy consumption of sensor enabled applications on mobile phones

    E-Print Network [OSTI]

    Hartman, Josh

    Recent research in ubiquitous and mobile computing uses mobile phones and wearable accelerometers to monitor individuals' physical activities for personalized and proactive health care. The goal of this project is to measure ...

  6. Fuzzy Chemical Abstract Machines

    E-Print Network [OSTI]

    Syropoulos, Apostolos

    2009-01-01

    Fuzzy set theory opens new vistas in computability theory and here I show this by defining a new computational metaphor--the fuzzy chemical metaphor. This metaphor is an extension of the chemical metaphor. In particular, I introduce the idea of a state of a system as a solution of fuzzy molecules, that is molecules that are not just different but rather similar, that react according to a set of fuzzy reaction rules. These notions become precise by introducing fuzzy labeled transition systems. Solutions of fuzzy molecules and fuzzy reaction rules are used to define the general notion of a fuzzy chemical abstract machine, which is a {\\em realization} of the fuzzy chemical metaphor. Based on the idea that these machines can be used to describe the operational semantics of process calculi and algebras that include fuzziness as a fundamental property, I present a toy calculus that is a fuzzy equivalent of the $\\pi$-calculus.

  7. Risk analysis of the LHC underground area fire risk due to faulty electrical equipment

    E-Print Network [OSTI]

    Harrison, A

    2007-01-01

    The European Organisation for Nuclear Research (CERN) in Geneva, Switzerland, is currently building the latest generation of particle accelerators, the LHC (Large Hadron Collider). The machine is housed in a circular tunnel of 27 km of circumference and is situated approximately 100 metres beneath the surface astride the Franco-Swiss border. Electrically induced fires in the LHC are a major concern, since an incident could present a threat to CERN personnel as well as the public. Moreover, the loss of equipment would result in significant costs and downtime. However, the amount of electrical equipment in the underground area required for operation, supervision and control of the machine is essential. Thus the present thesis is assessing the risk of fire due to faulty electrical equipment in both a qualitative as well as quantitative way. The recommendations following the qualitative analysis suggest the introduction of fire protection zones for the areas with the highest risk of fire due to a combination of p...

  8. Origins of Eponymous Orthopaedic Equipment

    E-Print Network [OSTI]

    Meals, Clifton; Wang, Jeffrey

    2010-01-01

    equipment named for their inventors and in the broadest useof dermatology and a proli?c inventor. He produced a single-Foley’s described the inventor as having a ‘‘great presence

  9. Machine LearningMachine Learning SrihariSrihari Linear Dynamical Systems

    E-Print Network [OSTI]

    Machine LearningMachine Learning SrihariSrihari Linear Dynamical Systems Sargur N. Srihari srihari@cedar.buffalo.edu Machine Learning Course: http://www.cedar.buffalo.edu/~srihari/CSE574/index.html #12;Machine LearningMachine;Machine LearningMachine Learning SrihariSrihari Motivation · Simple problem in practical settings

  10. Water-Using Equipment: Domestic

    SciTech Connect (OSTI)

    Solana, Amy E.; Mcmordie, Katherine

    2006-01-24

    Water management is an important aspect of energy engineering. This article addresses water-using equipment primarily used for household purposes, including faucets, showers, toilets, urinals, dishwashers, and clothes washers, and focuses on how the equipment can be optimized to save both water and energy. Technology retrofits and operation and maintenance changes are the primary methods discussed for water and energy conservation. Auditing to determine current consumption rates is also described for each technology.

  11. 4/6/2014 Micro Windmill Recharges Phone Batteries | Solar Feeds http://www.solarfeeds.com/micro-windmill-recharges-phone-batteries/ 1/3

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    Opportunity? In Focus: Reducing Business Energy Costs Vermont Raises Support for Solar Can Solar Save Brazil4/6/2014 Micro Windmill Recharges Phone Batteries | Solar Feeds http://www.solarfeeds.com/micro-windmill-recharges-phone-batteries/ 1/3 Micro Windmill Recharges Phone Batteries 15 January of 2014 by SolarFeeds A UT Arlington

  12. 2/23/2014 Tinywindmills for charging your phone | Forum for the Future https://www.forumforthefuture.org/blog/tiny-windmills-charging-your-phone 1/2

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    2/23/2014 Tinywindmills for charging your phone | Forum for the Future https://www.forumforthefuture.org/blog/tiny-windmills-charging-your-phone 1/2 Home > Blogs > Show All > Tiny windmills for charging your phone Events Masters Course Members area Jobs Media Centre UK USA India Enter keywords Filter Show All Forum Blog Jonathon Porritt Weak

  13. 2/24/2014 Micro-Windmills to Recharge Cell Phones http://www.jadecadelina.com/innovation/micro-windmills-recharge-phones/ 1/2

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    2/24/2014 Micro-Windmills to Recharge Cell Phones http://www.jadecadelina.com/innovation/micro-windmills & Technology Search this site... R ECEN T P OSTS welcome Micro-Windmills to Recharge Cell Phones Super Ty phoon (required) Micro-Windmills to Recharge Cell Phones January 16, 2014 · by mr.jade · in Energy, Innovation

  14. In an emergency CALL 911 from any campus phone or cell phone. Non-emergency: 803-777-4215 Emergency and Safety Procedures

    E-Print Network [OSTI]

    In an emergency CALL 911 from any campus phone or cell phone. Non-emergency: 803-777-4215 Emergency and Safety Procedures Emergency Phone Numbers Introduction Safety Tips Workplace Violence Severe Weather / Tornado / Flash Flood Fire Hazardous Material Release Suspicious Activity Active Shooter Medical Emergency

  15. Summary of Construction Equipment Tests and Activities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Equipment Tests A series of tests were conducted by the APS Construction Vibration Measurement Task Force using various pieces of construction equipment at the APCF...

  16. Robust Minimax Probability Machine Regression Robust Minimax Probability Machine Regression

    E-Print Network [OSTI]

    Grudic, Greg

    Robust Minimax Probability Machine Regression Robust Minimax Probability Machine Regression Thomas of Computer Science University of Colorado Boulder, C0 80309-0430, USA Abstract We formulate regression as maximizing the minimum probability () that the regression model is within ± of all future observations (i

  17. Lean Green Skating Machine Report No. 1

    E-Print Network [OSTI]

    Levi, Anthony F. J.

    and trying it for him/herself. The Lean Green Skating Machine is designed to help skaters recognize when Machine Report No. 1 Summary This report includes the details and design of the Lean Green Skating MachineLean Green Skating Machine Report No. 1 Lean Green Skating Machine Report No. 1 Submitted by Simon

  18. Using Mobile Phone Data for Electricity Infrastructure Planning

    E-Print Network [OSTI]

    Martinez-Cesena, Eduardo Alejandro; Ndiaye, Mamadou; Schläpfer, Markus

    2015-01-01

    Detailed knowledge of the energy needs at relatively high spatial and temporal resolution is crucial for the electricity infrastructure planning of a region. However, such information is typically limited by the scarcity of data on human activities, in particular in developing countries where electrification of rural areas is sought. The analysis of society-wide mobile phone records has recently proven to offer unprecedented insights into the spatio-temporal distribution of people, but this information has never been used to support electrification planning strategies anywhere and for rural areas in developing countries in particular. The aim of this project is the assessment of the contribution of mobile phone data for the development of bottom-up energy demand models, in order to enhance energy planning studies and existing electrification practices. More specifically, this work introduces a framework that combines mobile phone data analysis, socioeconomic and geo-referenced data analysis, and state-of-the-...

  19. Calibrating Pesticide Application Ground Equipment 

    E-Print Network [OSTI]

    Shaw, Bryan W.

    2000-07-05

    - pose of rinse water as hazardous waste. Clean and lubricate the pump. Equipment used to apply certain pesticides should not be used to apply others. Do not use equipment to apply 2,4-D, MCPA, 2,4-DP, MCPP, and 2,4- DB for any other purpose because... or a commercial decontaminate for- mulation. Most contain a combination of soda ash, detergent and alkaline chlorine. Rinse thoroughly with clean water. Remove nozzles to clean screens and tips. Apply rinse water to a field per label requirements or dis...

  20. Materialization of Universal Turing Machines

    E-Print Network [OSTI]

    Forum Paderborn, Germany #12;Contents Alan Turing's relation to Germany Turing Machines Hasenjaeger was -- unknowingly -- Alan Turing's one-man counterpart for the security of the ENIGMA on the German side #12;Alan Turing: His time ahead 1936: Defines a programmable Machine and solves the Entscheidungsproblem (On

  1. MACHINE SHOP SAFETY POLICY THE WYSS INSTITUTE

    E-Print Network [OSTI]

    Church, George M.

    MACHINE SHOP SAFETY POLICY THE WYSS INSTITUTE FOR BIOLOGICAL INSPIRED ENGINEERING JUNE 2014 _____________________________________________ 7 4.0 GENERAL MACHINE SHOP RULES ________________________________________ 8 4.1 CLEANLINESS _________________________________________________ 13 7.0 MACHINERY/MACHINE GUARDING ______________________________________ 14 7.1 GUIDELINES

  2. Environmental constituents of Electrical Discharge Machining

    E-Print Network [OSTI]

    Cho, Margaret H. (Margaret Hyunjoo), 1982-

    2004-01-01

    Electrical Discharge Machining (EDM) is a non-traditional process that uses no mechanical forces to machine metals. It is extremely useful in machining hard materials. With the advantages EDM has to offer and its presence ...

  3. APPROVED MATERIALS FOR ALSEP EQUIPMENT

    E-Print Network [OSTI]

    Rathbun, Julie A.

    expanding Section I and Section II and adding Section III. New materials added in this revision are: 211 212#12;#12;: : . APPROVED MATERIALS FOR ALSEP EQUIPMENT NO. REV. NO. ATM 242 E PAGE COVER OF 54 DATE 213 322 323 324 417 418 419 612 613 806 1111 Materials reinstated (clarified type no.): 1009 Prepared

  4. Cleaning Mechanised Pesticide Spray Equipment

    E-Print Network [OSTI]

    , hoses, nozzles, valves and pumps of mechanised spraying equipment can contaminate operators and possibly bowls, hoses, tanks and pumps retain the most solution. This Technical Note sets out the procedures label for any special cleaning instructions. · Wear the protective clothing described on the pesticide

  5. Raman P. Singh School of Mechanical and Aerospace Engineering Phone (Tulsa): 918.594.8155

    E-Print Network [OSTI]

    Ghajar, Afshin J.

    Raman P. Singh School of Mechanical and Aerospace Engineering Phone (Tulsa): 918.594.8155 Oklahoma State University Phone (Stillwater): 405.744.1825 700 N. Greenwood Avenue, Tulsa, OK 74106 raman

  6. U-239: Apple iPhone SMS Processing Flaw Lets Remote Users Spoof...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    39: Apple iPhone SMS Processing Flaw Lets Remote Users Spoof SMS Source Addresses U-239: Apple iPhone SMS Processing Flaw Lets Remote Users Spoof SMS Source Addresses August 20,...

  7. A comparison of phone and grapheme-based spoken term detection 

    E-Print Network [OSTI]

    Wang, Dong; Frankel, Joe; Tejedor, Javier; King, Simon

    2008-01-01

    text corpora. We present experiments on Spanish and English data, comparing phone and grapheme-based STD. For Spanish, where phone and grapheme-based systems give similar transcription word error rates (WERs), grapheme-based STD significantly...

  8. Indexes for selected equipment show moderate increase

    SciTech Connect (OSTI)

    Farrar, G.

    1997-04-07

    Costs for six selected equipment items used in refining construction operations have been surveyed for the 3 years, 1994--1996. The accompanying table shows Nelson-Farrar equipment indexes for these items of equipment. The six categories of equipment tracked are bubble trays, fractionating towers, tube stills, valves and fittings, tanks and pressure vessels, and non-metallic building materials. Tables also present data on operating costs for materials, labor, and equipment.

  9. Hilbert's machine and w-order

    E-Print Network [OSTI]

    Antonio Leon

    2009-11-23

    Hilbert's machine is a supertask machine inspired by Hilbert's Hotel whose functioning leads to a contradictory result involving w-ordering.

  10. Funding Opportunity: Next Generation Electric Machines: Megawatt...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Funding Opportunity: Next Generation Electric Machines: Megawatt Class Motors Funding Opportunity: Next Generation Electric Machines: Megawatt Class Motors March 19, 2015 - 4:45pm...

  11. Covered Product Category: Refrigerated Beverage Vending Machines...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    beverage vending machines are the General Services Administration (GSA) and Defense Logistics Agency (DLA). GSA sells refrigerated beverage vending machines through its...

  12. Smart Phones for the Elders: Boosting the Intelligence of Smart Homes

    E-Print Network [OSTI]

    Helal, Abdelsalam

    Smart Phones for the Elders: Boosting the Intelligence of Smart Homes William Mann, OTR, Ph that adopts the emerging smart phones technology as an effective booster of the utility of smart homes and other smart spaces. We present our vision of using smart phones as magic wands that can be used

  13. Coverage Update -19 July 2013 Mobile phones running on urine power

    E-Print Network [OSTI]

    Aickelin, Uwe

    mobile phones with that most ubiquitous of by- products, human urine. Yes, it's pee power. The team from;British scientists claim to have discovered a way to use human urine to power mobile phones. ResearchersCoverage Update - 19 July 2013 Mobile phones running on urine power This week has seen exceptional

  14. Emergency Procedures for After 5pm and Weekends Important Phone Numbers

    E-Print Network [OSTI]

    California at Berkeley, University of

    Emergency Procedures for After 5pm and Weekends Important Phone Numbers Life-threatening Emergencies From any office or campus land line phone 911 From a cell phone (510) 642-3333 Non-life threatening Emergencies University Police (UCPD) (510) 642-6760 Environmental, Health & Safety (EH&S) (510

  15. Case: Cellular phones Authors: Michael Hamid, Jose de Jesus Rodriguez, Nicole Trahan

    E-Print Network [OSTI]

    Williams, John M.

    Case: Cellular phones Authors: Michael Hamid, Jose de Jesus Rodriguez, Nicole Trahan Suggested Courses: Antenna Thy/Des Level: Junior I. Narrative Cellular phones are one of the most popular items signals in the 800 MHz band and up to and beyond a 30 mile radius. Lately cellular phones have been

  16. Analysis of Built-in Mobile Phone Sensors for Supporting Interactions with the Real World

    E-Print Network [OSTI]

    . Keywords Evaluation, Sensors, Mobile device, Mobile phone, J2ME, MIDP. 1. INTRODUCTION It is commonly agreed that mobile devices such as mobile phones, smart phones or PDAs have become ubiquitous in our mobile device and the service he uses (e.g. making calls, writing SMS, browsing the web). The usage

  17. Darin Matthews, Director Phone: 503-725-5460

    E-Print Network [OSTI]

    Elzanowski, Marek

    Opportunities Small Contracts -- under $25K PSU can informally complete small contracts and purchases among qualified contractors, including MWESBs. We can also directly negotiate these contracts and rotate smallContact Us Darin Matthews, Director Phone: 503-725-5460 Email: darin.matthews@pdx.edu Contracting

  18. Grid Watch: Mapping Blackouts with Smart Phones Noah Klugman

    E-Print Network [OSTI]

    Dutta, Prabal

    Grid Watch: Mapping Blackouts with Smart Phones Noah Klugman , Javier Rosa , Pat Pannuto , Matthew General Terms Economics, Measurement, Reliability, Security Keywords Smart Grid, Power Monitoring into the power grid is via a cen- tralized network of utility owned, deployed, and controlled smart meters. While

  19. Department of Psychology Phone: 304-293-2001

    E-Print Network [OSTI]

    Berenhaut, Kenneth S.

    Department of Psychology Phone: 304-293-2001 Fax: 304-293-6606 http://psychology.wvu.edu/ Department of Psychology 1124 Life Sciences Building 53 Campus Drive PO Box 6040 Morgantown, WV 26506 of Psychology (www. psychology.wvu.edu) invites applications for tenure-track Assistant Professor positions

  20. Phone: 404-413-0783 Fax: 404-413-3231

    E-Print Network [OSTI]

    Frantz, Kyle J.

    Phone: 404-413-0783 Fax: 404-413-3231 Emergency Management Director: ksumas1@gsu.edu Fire Safety Ames. ·Know how to report an incident from the classroom(s), laboratory(ies), and other OF EMERGENCY MANAGEMENT "Plan, Prepare, React"! Georgia State University Office of Emergency Management Tel

  1. Stress Recognition using Wearable Sensors and Mobile Phones

    E-Print Network [OSTI]

    Stress Recognition using Wearable Sensors and Mobile Phones Akane Sano Massachusetts Institute or behavioral markers for stress. We collected 5 days of data for 18 participants: a wrist sensor (accelerometer/off) and surveys (stress, mood, sleep, tiredness, general health, alcohol or caffeinated beverage intake

  2. PROGRAM INFORMATION Phone: Lupita Villalobos: (951) 827-1665

    E-Print Network [OSTI]

    Mills, Allen P.

    , and expand their knowledge of electricity and technology.) 2:30-4 p.m. Fossil Fuels and Renewable Energy programming? What does a computer programmer do? Come and learn the basics of computer programming through fun on fun for all! 12:30-1 p.m. Lunch 1-2:30 p.m. Electricity and Technology Smart phones, television

  3. Lubbock, Texas 79409-5005 Phone: (806) 742-1480

    E-Print Network [OSTI]

    Rock, Chris

    Box 45005 Lubbock, Texas 79409-5005 Phone: (806) 742-1480 Fax: 806) 742-0062 An EEO/Affirmative Action Institution Certification of Military Personnel and Dependents Who Enroll at Texas Tech Texas that they are then assigned to duty in Texas." 1. Full Legal Name {Mr.} {Ms.} {Mrs

  4. Department Chairs in PSOM Departments Department Chair Phone Email

    E-Print Network [OSTI]

    Sharp, Kim

    Department Chairs in PSOM Departments Department Chair Phone Email Anesthesiology and Critical Care@mail.med.upenn.edu Cancer Biology Lewis Chodosh, MD, PhD 898-1321 chodosh@mail.med.upenn.edu Cell & Developmental Biology@mail.med.upenn.edu Radiation Oncology James M. Metz, MD (Interim) 662-2428 metz@uphs.upenn.edu Radiology Mitchell D. Schnall

  5. Education Officers in PSOM Departments Education Officer Phone Email

    E-Print Network [OSTI]

    Sharp, Kim

    Education Officers in PSOM Departments Education Officer Phone Email Anesthesiology and Critical@upenn.edu Cell & Developmental Biology Neal A. Rubinstein, MD, PhD 898-4162 nrubinst@mail.med.upenn.edu Psychiatry Anthony Rostain, MD 746-7210 rostain@mail.med.upenn.edu Radiation Oncology Sydney Evans, VMD 898

  6. Math Learning Center Undergraduate Tutor Application LOCAL/ Bozeman address: Phone

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    Math Learning Center Undergraduate Tutor Application Name: ID# LOCAL/ Bozeman address: Phone: City Rosenstein in the Math Department. (Email: sabrina.rosenstein@montana.edu) Name of reference Please list all the college math courses you have taken and the grade received. In the space below, discuss your reasons

  7. Exploiting MMS Vulnerabilities to Stealthily Exhaust Mobile Phone's Battery

    E-Print Network [OSTI]

    Chen, Hao

    Exploiting MMS Vulnerabilities to Stealthily Exhaust Mobile Phone's Battery Radmilo Racic' battery power up to 22 times faster and therefore could render these devices useless before the end of business hours. This attack targets a unique resource bot­ tleneck in mobile devices (the battery power

  8. Exploiting MMS Vulnerabilities to Stealthily Exhaust Mobile Phone's Battery

    E-Print Network [OSTI]

    Chen, Hao

    Exploiting MMS Vulnerabilities to Stealthily Exhaust Mobile Phone's Battery Radmilo Racic' battery power up to 22 times faster and therefore could render these devices useless before the end of business hours. This attack targets a unique resource bot- tleneck in mobile devices (the battery power

  9. Used energy-related laboratory equipment grant program for institutions of higher learning. Eligible equipment catalog

    SciTech Connect (OSTI)

    Not Available

    1994-07-01

    This is a listing of energy related equipment available through the Energy-Related Laboratory Equipment Grant Program which grants used equipment to institutions of higher education for energy-related research. Information included is an overview of the program, how to apply for a grant of equipment, eligibility requirements, types of equipment available, and the costs for the institution.

  10. HUMAN MACHINE COOPERATIVE TELEROBOTICS

    SciTech Connect (OSTI)

    William R. Hamel; Spivey Douglass; Sewoong Kim; Pamela Murray; Yang Shou; Sriram Sridharan; Ge Zhang; Scott Thayer; Rajiv V. Dubey

    2003-06-30

    The remediation and deactivation and decommissioning (D&D) of nuclear waste storage tanks using telerobotics is one of the most challenging tasks faced in environmental cleanup. Since a number of tanks have reached the end of their design life and some of them have leaks, the unstructured, uncertain and radioactive environment makes the work inefficient and expensive. However, the execution time of teleoperation consumes ten to hundred times that of direct contact with an associated loss in quality. Thus, a considerable effort has been expended to improve the quality and efficiency of telerobotics by incorporating into teleoperation and robotic control functions such as planning, trajectory generation, vision, and 3-D modeling. One example is the Robot Task Space Analyzer (RTSA), which has been developed at the Robotics and Electromechanical Systems Laboratory (REMSL) at the University of Tennessee in support of the D&D robotic work at the Oak Ridge National Laboratory and the National Energy Technology Laboratory. This system builds 3-D models of the area of interest in task space through automatic image processing and/or human interactive manual modeling. The RTSA generates a task plan file, which describes the execution of a task including manipulator and tooling motions. The high level controller of the manipulator interprets the task plan file and executes the task automatically. Thus, if the environment is not highly unstructured, a tooling task, which interacts with environment, will be executed in the autonomous mode. Therefore, the RTSA not only increases the system efficiency, but also improves the system reliability because the operator will act as backstop for safe operation after the 3-D models and task plan files are generated. However, unstructured conditions of environment and tasks necessitate that the telerobot operates in the teleoperation mode for successful execution of task. The inefficiency in the teleoperation mode led to the research described as Human Machine Cooperative Telerobotics (HMCTR). The HMCTR combines the telerobot with robotic control techniques to improve the system efficiency and reliability in teleoperation mode. In this topical report, the control strategy, configuration and experimental results of Human Machines Cooperative Telerobotics (HMCTR), which modifies and limits the commands of human operator to follow the predefined constraints in the teleoperation mode, is described. The current implementation is a laboratory-scale system that will be incorporated into an engineering-scale system at the Oak Ridge National Laboratory in the future.

  11. Slide system for machine tools

    DOE Patents [OSTI]

    Douglass, S.S.; Green, W.L.

    1980-06-12

    The present invention relates to a machine tool which permits the machining of nonaxisymmetric surfaces on a workpiece while rotating the workpiece about a central axis of rotation. The machine tool comprises a conventional two-slide system (X-Y) with one of these slides being provided with a relatively short travel high-speed auxiliary slide which carries the material-removing tool. The auxiliary slide is synchronized with the spindle speed and the position of the other two slides and provides a high-speed reciprocating motion required for the displacement of the cutting tool for generating a nonaxisymmetric surface at a selected location on the workpiece.

  12. Toward polarized antiprotons: Machine development for spin-filtering experiments

    E-Print Network [OSTI]

    C. Weidemann; F. Rathmann; H. J. Stein; B. Lorentz; Z. Bagdasarian; L. Barion; S. Barsov; U. Bechstedt; S. Bertelli; D. Chiladze; G. Ciullo; M. Contalbrigo; S. Dymov; R. Engels; M. Gaisser; R. Gebel; P. Goslawski; K. Grigoriev; G. Guidoboni; A. Kacharava; V. Kamerdzhiev; A. Khoukaz; A. Kulikov; A. Lehrach; P. Lenisa; N. Lomidze; G. Macharashvili; R. Maier; S. Martin; D. Mchedlishvili; H. O. Meyer; S. Merzliakov; M. Mielke; M. Mikirtychiants; S. Mikirtychiants; A. Nass; N. N. Nikolaev; D. Oellers; M. Papenbrock; A. Pesce; D. Prasuhn; M. Retzlaff; R. Schleichert; D. Schröer; H. Seyfarth; H. Soltner; M. Statera; E. Steffens; H. Stockhorst; H. Ströher; M. Tabidze; G. Tagliente; P. Thörngren Engblom; S. Trusov; Yu. Valdau; A. Vasiliev; P. Wüstner

    2015-03-09

    The paper describes the commissioning of the experimental equipment and the machine studies required for the first spin-filtering experiment with protons at a beam kinetic energy of $49.3\\,$MeV in COSY. The implementation of a low-$\\beta$ insertion made it possible to achieve beam lifetimes of $\\tau_{\\rm{b}}=8000\\,$s in the presence of a dense polarized hydrogen storage-cell target of areal density $d_{\\rm t}=(5.5\\pm 0.2)\\times 10^{13}\\,\\mathrm{atoms/cm^{2}}$. The developed techniques can be directly applied to antiproton machines and allow for the determination of the spin-dependent $\\bar{p}p$ cross sections via spin filtering.

  13. Development of Electrochemical Micro Machining 

    E-Print Network [OSTI]

    Srinivas Sundarram, Sriharsha

    2008-10-10

    The machining of materials on micrometer and sub-micrometer scale is considered the technology of the future. The current techniques for micro manufacturing mostly are silicon based. These manufacturing techniques are ...

  14. Time Machine at the LHC

    E-Print Network [OSTI]

    I. Ya. Aref'eva; I. V. Volovich

    2007-10-25

    Recently, black hole and brane production at CERN's Large Hadron Collider (LHC) has been widely discussed. We suggest that there is a possibility to test causality at the LHC. We argue that if the scale of quantum gravity is of the order of few TeVs, proton-proton collisions at the LHC could lead to the formation of time machines (spacetime regions with closed timelike curves) which violate causality. One model for the time machine is a traversable wormhole. We argue that the traversable wormhole production cross section at the LHC is of the same order as the cross section for the black hole production. Traversable wormholes assume violation of the null energy condition (NEC) and an exotic matter similar to the dark energy is required. Decay of the wormholes/time machines and signatures of time machine events at the LHC are discussed.

  15. Diamond turning machine controller implementation

    SciTech Connect (OSTI)

    Garrard, K.P.; Taylor, L.W.; Knight, B.F.; Fornaro, R.J.

    1988-12-01

    The standard controller for a Pnuemo ASG 2500 Diamond Turning Machine, an Allen Bradley 8200, has been replaced with a custom high-performance design. This controller consists of four major components. Axis position feedback information is provided by a Zygo Axiom 2/20 laser interferometer with 0.1 micro-inch resolution. Hardware interface logic couples the computers digital and analog I/O channels to the diamond turning machine`s analog motor controllers, the laser interferometer, and other machine status and control information. It also provides front panel switches for operator override of the computer controller and implement the emergency stop sequence. The remaining two components, the control computer hardware and software, are discussed in detail below.

  16. Metal-mediated molecular machines 

    E-Print Network [OSTI]

    Howgego, David Christopher

    2013-06-29

    Nature abounds with ingenious nanoscopic machines employed to carry out all of the requisite tasks that collectively contribute to the molecular basis of life. This thesis focuses primarily on a sub-set known as "molecular ...

  17. 1/14/14 Technologyuses micro-windmills to recharge cell phones www.rdmag.com/print/news/2014/01/technology-uses-micro-windmills-recharge-cell-phones 1/3

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    1/14/14 Technologyuses micro-windmills to recharge cell phones www.rdmag.com/print/news/2014/01/technology-uses-micro-windmills-recharge-cell-phones 1/3 One of Smitha Rao's micro- windmills is placed here uses micro-windmills to recharge cell phones Technology uses micro-windmills to recharge cell phones

  18. Simulation of Synchronous Machines This chapter covers

    E-Print Network [OSTI]

    McCalley, James D.

    1 Simulation of Synchronous Machines This chapter covers: (A) Sections 5.25.7: Determination of initial conditions (B) Section 5.8: Determination of machine parameters from manufacturers' data.3: Machine connected to an infinite bus through a line · Section 5.4: Machine connected

  19. Abatement of Air Pollution: Air Pollution Control Equipment and Monitoring Equipment Operation (Connecticut)

    Broader source: Energy.gov [DOE]

    These regulations contain instructions for the operation and monitoring of air pollution control equipment, as well as comments on procedures in the event of equipment breakdown, failure, and...

  20. Operations and Maintenance for Major Equipment Types

    Broader source: Energy.gov [DOE]

    Equipment lies at the heart of all operations and maintenance (O&M) activities. This equipment varies greatly across the Federal sector in age, size, type, model, condition, etc.

  1. Asset Management Equipment Disposal Form -Refrigerant Recovery

    E-Print Network [OSTI]

    Sin, Peter

    EPA's rule, equipment that is typically dismantled on site before disposal (e.g., retail food vacuum, and for small appliances the recover equipment performance requirements are 90 percent efficiency

  2. Fire suppression and detection equipment

    SciTech Connect (OSTI)

    E.E. Bates [HSB Professional Loss Control, Lexington, KY (United States)

    2006-01-15

    Inspection and testing guidelines go beyond the 'Code of Federal Regulation'. Title 30 of the US Code of Federal Regulations (30 CFR) contains requirements and references to national standards for inspection, testing and maintenance of fire suppression and detection equipment for mine operators. However, federal requirements have not kept pace with national standards and best practices. The article lists National Fire Protection (NFPA) standards that are referenced by the US Mine Safety and Health Administration (MSHA) in 30 CFR. It then discusses other NFPA Standards excluded from 30 CFR and explains the NFPA standard development process. 2 refs., 3 tabs., 5 photos.

  3. Equipment Certification | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, AlabamaETEC GmbH JumpEllenville,Power Corp Jump to:SIBR JV JumpCertificationEquipment

  4. Agricultural Equipment | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EAand DaltonSolar EnergyAerodynall Countriescapital GmbH JumpEquipment Jump

  5. Equipment Insulation | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePowerEdisto Electric Coop, IncsourceEnginuityBusinessEnviva MaterialsEquipment

  6. Equipment Listing | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submitKansasCommunitiesof Energy ServicesEnergy4th Quarter 2012 for Equipment

  7. Appliance Equipment Standards Northwest Impact Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (2) Automatic Ice Makers; (3) Commercial Water Heaters; (4) Ranges and Ovens; (5) Vending Machines; (6) Pool Heaters; (7) Small electric motors; (8) Residential Central Air...

  8. Liquid-Liquid Extraction Equipment

    SciTech Connect (OSTI)

    Jack D. Law; Terry A. Todd

    2008-12-01

    Solvent extraction processing has demonstrated the ability to achieve high decontamination factors for uranium and plutonium while operating at high throughputs. Historical application of solvent extraction contacting equipment implies that for the HA cycle (primary separation of uranium and plutonium from fission products) the equipment of choice is pulse columns. This is likely due to relatively short residence times (as compared to mixer-settlers) and the ability of the columns to tolerate solids in the feed. Savannah River successfully operated the F-Canyon with centrifugal contactors in the HA cycle (which have shorter residence times than columns). All three contactors have been successfully deployed in uranium and plutonium purification cycles. Over the past 20 years, there has been significant development of centrifugal contactor designs and they have become very common for research and development applications. New reprocessing plants are being planned in Russia and China and the United States has done preliminary design studies on future reprocessing plants. The choice of contactors for all of these facilities is yet to be determined.

  9. Minimal universal quantum heat machine

    E-Print Network [OSTI]

    David Gelbwaser-Klimovsky; Robert Alicki; Gershon Kurizki

    2013-01-29

    In traditional thermodynamics the Carnot cycle yields the ideal performance bound of heat engines and refrigerators. We propose and analyze a minimal model of a heat machine that can play a similar role in quantum regimes. The minimal model consists of a single two-level system with periodically modulated energy splitting that is permanently, weakly, coupled to two spectrally-separated heat baths at different temperatures. The equation of motion allows to compute the stationary power and heat currents in the machine consistently with the second-law of thermodynamics. This dual-purpose machine can act as either an engine or a refrigerator (heat pump) depending on the modulation rate. In both modes of operation the maximal Carnot efficiency is reached at zero power. We study the conditions for finite-time optimal performance for several variants of the model. Possible realizations of the model are discussed.

  10. Consider Steam Turbine Drives for Rotating Equipment | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Steam Turbine Drives for Rotating Equipment Consider Steam Turbine Drives for Rotating Equipment This tip sheet outlines the benefits of steam turbine drives for rotating equipment...

  11. Cooling system for rotating machine

    DOE Patents [OSTI]

    Gerstler, William Dwight (Niskayuna, NY); El-Refaie, Ayman Mohamed Fawzi (Niskayuna, NY); Lokhandwalla, Murtuza (Clifton Park, NY); Alexander, James Pellegrino (Ballston Lake, NY); Quirion, Owen Scott (Clifton Park, NY); Palafox, Pepe (Schenectady, NY); Shen, Xiaochun (Schenectady, NY); Salasoo, Lembit (Schenectady, NY)

    2011-08-09

    An electrical machine comprising a rotor is presented. The electrical machine includes the rotor disposed on a rotatable shaft and defining a plurality of radial protrusions extending from the shaft up to a periphery of the rotor. The radial protrusions having cavities define a fluid path. A stationary shaft is disposed concentrically within the rotatable shaft wherein an annular space is formed between the stationary and rotatable shaft. A plurality of magnetic segments is disposed on the radial protrusions and the fluid path from within the stationary shaft into the annular space and extending through the cavities within the radial protrusions.

  12. Mobile machine hazardous working zone warning system

    DOE Patents [OSTI]

    Schiffbauer, William H. (Connellsville, PA); Ganoe, Carl W. (Pittsburgh, PA)

    1999-01-01

    A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation thereof. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine.

  13. Mobile machine hazardous working zone warning system

    DOE Patents [OSTI]

    Schiffbauer, W.H.; Ganoe, C.W.

    1999-08-17

    A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine. 3 figs.

  14. Improving Machine Tool Interoperability Using Standardized Interface Protocols: MT Connect

    E-Print Network [OSTI]

    Vijayaraghavan, Athulan; Sobel, Will; Fox, Armando; Dornfeld, David; Warndorf, Paul

    2008-01-01

    23-26, 2008 IMPROVING MACHINE TOOL INTEROPERABILITY USINGMTConnect TM data from a machine tool for process planningpotential of improved machine-tool interoperability through

  15. Parallel machine match-up scheduling with manufacturing cost considerations

    E-Print Network [OSTI]

    Aktürk, M. Selim; Atamtürk, Alper; Gürel, Sinan

    2010-01-01

    approach for the single machine scheduling problem. Journaldecisions on parallel CNC machines: -constraint approach.mechanism for the CNC machine scheduling problems with

  16. Machine Learning for Humanoid Robot Modeling and Control /

    E-Print Network [OSTI]

    Wu, Tingfan

    2013-01-01

    Face . . . . . . . . . . . 1.2 Machine Learning ApproachesInternational Conference on Machine Learning (ICML), 2011. [hands. ICRA 2013, 2013. [40] Machine Perception Laboratory.

  17. Machine Tool Design and Operation Strategies for Green Manufacturing

    E-Print Network [OSTI]

    2010-01-01

    Power Demand of Precision Machine Tools, MS Thesis, Dept.Environmental Burden for Machine Tool Operation, JSME Int.of Downsized Design for Machine Tools on the Environmental

  18. Design and Operation Strategies for Green Machine Tool Development

    E-Print Network [OSTI]

    Diaz, Nancy; Helu, Moneer; Dornfeld, David

    2010-01-01

    2010, Environmental Analysis of Milling Machine Tool Use inof four types of milling machines varying in automation asof downsizing a CNC milling machine tool on its energy and

  19. Machine Tool Design and Operation Strategies for Green Manufacturing

    E-Print Network [OSTI]

    2010-01-01

    2010, Environmental Analysis of Milling Machine Tool Use inconsumption analysis of milling machine tools are firstof four types of milling machines Proceedings of 4th CIRP

  20. Description of the Scenario Machine

    E-Print Network [OSTI]

    V. M. Lipunov; K. A. Postnov; M. E. Prokhorov; A. I. Bogomazov

    2007-09-26

    We present here an updated description of the "Scenario Machine" code. This tool is used to carry out a population synthesis of binary stars. Previous version of the description can be found at http://xray.sai.msu.ru/~mystery//articles/review/contents.html

  1. Factory capacity limits Machine dependencies

    E-Print Network [OSTI]

    Foley, Simon

    Factory capacity limits Machine dependencies Employee scheduling Raw material availability Other internal operations (and also possibly the actions of other suppliers that supply raw materials) and at an international workshop at the multi-agent conference (AAMAS'06). Manufacturer Customer demand Penalties for non

  2. Designing a parallel simula machine

    SciTech Connect (OSTI)

    Papazoglou, M.P.; Georgiadis, P.I.; Maritsas, D.G.

    1983-10-01

    The parallel simula machine (PSM) architecture is based upon a master/slave topology, incorporating a master microprocessor. Interconnection circuitry between the master and slave processor modules uses a timesharing system bus and various programmable interrupt control units. Common and private memory modules reside in the PSM, and direct memory access transfers ease the master processor's workload. 5 references.

  3. Auditing Technology for Electronic Voting Machines

    E-Print Network [OSTI]

    Cohen, Sharon B.

    2005-05-19

    Direct Recording Electronic (DRE) voting machine security has been a significant topic of contention ever since Diebold voting machine code turned up on a public internet site in 2003 and computer scientists at Johns Hopkins ...

  4. Auditing technology for electronic voting machines

    E-Print Network [OSTI]

    Cohen, Sharon B

    2005-01-01

    Direct Recording Electronic (DRE) voting machine security has been a significant topic of contention ever since Diebold voting machine code turned up on a public Internet site in 2003 and computer scientists at Johns Hopkins ...

  5. Integrated Inverter For Driving Multiple Electric Machines

    DOE Patents [OSTI]

    Su, Gui-Jia [Knoxville, TN; Hsu, John S [Oak Ridge, TN

    2006-04-04

    An electric machine drive (50) has a plurality of inverters (50a, 50b) for controlling respective electric machines (57, 62), which may include a three-phase main traction machine (57) and two-phase accessory machines (62) in a hybrid or electric vehicle. The drive (50) has a common control section (53, 54) for controlling the plurality of inverters (50a, 50b) with only one microelectronic processor (54) for controlling the plurality of inverters (50a, 50b), only one gate driver circuit (53) for controlling conduction of semiconductor switches (S1-S10) in the plurality of inverters (50a, 50b), and also includes a common dc bus (70), a common dc bus filtering capacitor (C1) and a common dc bus voltage sensor (67). The electric machines (57, 62) may be synchronous machines, induction machines, or PM machines and may be operated in a motoring mode or a generating mode.

  6. The timely self-portrait machine

    E-Print Network [OSTI]

    Haun, Gregory Cosmo

    1992-01-01

    This thesis explores the philosophy which underlies the Timely Self-Portrait Machine. The cultural history of the machine, the phenomenon of Television, and the personal history of this project are discussed. Technical ...

  7. Space Heaters, Computers, Cell Phone Chargers: How Plugged In Are Commercial Buildings?

    E-Print Network [OSTI]

    Sanchez, Marla; Webber, Carrie; Brown, Richard; Busch, John; Pinckard, Margaret; Roberson, Judy

    2007-01-01

    Heaters, Computers, Cell Phone Chargers: How Plugged In Arefixture type. For battery chargers, we noted the portablecomponent and whether the charger was empty or full. For

  8. Clean Cities Launches iPhone App for Alternative Fueling Station...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Addthis iPhone users now have access to a free app that locates fueling stations offering alternative fuels, including electricity, natural gas, biodiesel, E85, propane, and...

  9. Final Report "LAB-SCALE SNOWMAKING MACHINE"

    E-Print Network [OSTI]

    with the future operation of this snow machine and the continued success of the Smart Bridge project. Sincerely

  10. Permutation parity machines for neural cryptography

    SciTech Connect (OSTI)

    Reyes, Oscar Mauricio; Zimmermann, Karl-Heinz

    2010-06-15

    Recently, synchronization was proved for permutation parity machines, multilayer feed-forward neural networks proposed as a binary variant of the tree parity machines. This ability was already used in the case of tree parity machines to introduce a key-exchange protocol. In this paper, a protocol based on permutation parity machines is proposed and its performance against common attacks (simple, geometric, majority and genetic) is studied.

  11. WEAR RESISTANT ALLOYS FOR COAL HANDLING EQUIPMENT

    E-Print Network [OSTI]

    Bhat, M.S.

    2011-01-01

    Proceedings of the Conference on Coal Feeding Systems, HeldWear Resistant Alloys for Coal Handling Equipment", proposalWear Resistant Alloys for Coal Handling Equi pment". The

  12. Healthcare Energy: Spotlight on Medical Equipment

    Broader source: Energy.gov [DOE]

    The Building Technologies Office conducted a healthcare energy end-use monitoring project for two sites. Read details about large medical imaging equipment energy results.

  13. Pollution Control Equipment Tax Deduction (Alabama)

    Broader source: Energy.gov [DOE]

    The Pollution Control Equipment Tax Deduction allows businesses to deduct from their Alabama net worth the net amount invested in all devices, facilities, or structures, and all identifiable...

  14. Materials Selection Considerations for Thermal Process Equipment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    productivity and operating cost of the equipment. These materials are used in burners, electrical heating elements, material handling, load support, and heater tubes, etc....

  15. Commercial and Industrial Kitchen Equipment Rebate Program

    Broader source: Energy.gov [DOE]

    NOTE: All equipment must be installed on or after January 1, 2015 through December 31, 2015. The documentation must be received no later than March 31, 2016. 

  16. Energy Conservation Program for Certain Industrial Equipment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standards and Test Procedures for Commercial Heating, Air- Conditioning, and Water-Heating Equipment AGENCY: Office of Energy Efficiency and Renewable Energy, Department...

  17. PPP Equipment Corporation | Open Energy Information

    Open Energy Info (EERE)

    PPP Equipment Corporation Sector: Solar Product: PPP-E designs, produces and markets Chemical Vapor Deposition (CVD) reactors and converter systems producing high-purity...

  18. Passive Exposure to Mobile Phones: Enhancement of Intensity by Reflection

    E-Print Network [OSTI]

    Tsuyoshi Hondou; Takenori Ueda; Yasuhiro Sakata; Nobuto Tanigawa; Tetsu Suzuki; Taizo Kobayashi; Kensuke Ikeda

    2007-03-12

    In a recent Letter [J. Phys. Soc. Jpn. 71, 432 (2002)], we reported a preliminary calculation and concluded that public exposure to mobile phones can be enhanced by microwave reflection in public spaces. In this paper, we confirm the significance of microwave reflection reported in our previous Letter by experimental and numerical studies. Furthermore, we show that "hot spots" often emerge in reflective areas, where the local exposure level is much higher than average. Such places include elevators, and we discuss other possible environments including trains, buses, cars, and airplanes. Our results indicate the risk of "passive exposure" to microwaves.

  19. Property:Incentive/Cont2Phone | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo,AltFuelVehicle2 Jump to: navigation, search ThisHeadquartersState JumpPleaseAddrPhone Jump

  20. Property:Incentive/Cont3Phone | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo,AltFuelVehicle2 Jump to: navigation, search ThisHeadquartersStateCont3Phone Jump to:

  1. Smart Phone Technologies Reduce Risks to Eagles from Wind Turbines |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing Tool FitsProjectDataSecretaryDepartment of EnergyDepartment of Energy Smart Phone

  2. Property:OutagePhoneNumber | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EIS Report Url Jump to: navigation,News/LinkUtility JumpOutagePhoneNumber

  3. Phone List | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26thI D-Nicholas Turro, 1982Science (SC)PeidongPhone List

  4. Phone List | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26thI D-Nicholas Turro, 1982Science (SC)PeidongPhone

  5. The new phone books are here! | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With U.S.Week DayDr. Jeffrey publication of the GroupofBThe new phone

  6. Photogrammetry & Machine Vision 1. Image sensors

    E-Print Network [OSTI]

    Giger, Christine

    Photogrammetry & Machine Vision 1. Image sensors (a) Fundamentals of image sensors (b) CCD image. Remondino, N. D'Apuzzo Photogrammetry and Machine Vision ­ 1. Measurement in images (b) Camera calibration of Photogrammetry and Machine Vision Fully understand: 1. Image based 3D and 4D measurement 2. Image based 3D

  7. Photogrammetry & Machine Vision 1. Image sensors

    E-Print Network [OSTI]

    Giger, Christine

    Photogrammetry & Machine Vision 1. Image sensors (a) Fundamentals of image sensors (b) CCD image'Apuzzo Photogrammetry and Machine Vision - 3 Point cloud processing, surface generation, texturing (b) Camera, noise) 2N. D'Apuzzo Photogrammetry and Machine Vision - 3 Point cloud processing, surface generation

  8. Machine Learning Attacks Against the ASIRRA CAPTCHA

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    Machine Learning Attacks Against the ASIRRA CAPTCHA Draft, February 28, 2008 Philippe Golle Palo of cats and dogs used in ASIRRA. This classifier is a combination of support-vector machine classifiers higher than the estimate given in [6] for machine vision attacks. The weakness we expose in the current

  9. Task and Machine Heterogeneities: Higher Moments Matter

    E-Print Network [OSTI]

    Maciejewski, Anthony A. "Tony"

    Task and Machine Heterogeneities: Higher Moments Matter Abdulla M. Al-Qawasmeh 1 , Anthony A.potter}@colostate.edu jtsmith@digitalglobe.com Abstract - One type of heterogeneous computing (HC) systems consists of machines in this matrix represents the ETC of a specific task on a specific machine when executed exclusively. Heuristics

  10. Method and apparatus for monitoring machine performance

    DOE Patents [OSTI]

    Smith, Stephen F. (Loudon, TN); Castleberry, Kimberly N. (Harriman, TN)

    1996-01-01

    Machine operating conditions can be monitored by analyzing, in either the time or frequency domain, the spectral components of the motor current. Changes in the electric background noise, induced by mechanical variations in the machine, are correlated to changes in the operating parameters of the machine.

  11. Unsupervised Segmentation for Statistical Machine Translation

    E-Print Network [OSTI]

    Koehn, Philipp

    Unsupervised Segmentation for Statistical Machine Translation Siriwan Sereewattana TH E U N I V E R for statistical machine translation. The approach requires no language- nor domain-specific knowledge whatsoever in principle the statistical framework of machine translation can be ap- plied to any language pair

  12. Debugging Fortran on a shared memory machine

    SciTech Connect (OSTI)

    Allen, T.R.; Padua, D.A.

    1987-01-01

    Debugging on a parallel processor is more difficult than debugging on a serial machine because errors in a parallel program may introduce nondeterminism. The approach to parallel debugging presented here attempts to reduce the problem of debugging on a parallel machine to that of debugging on a serial machine by automatically detecting nondeterminism. 20 refs., 6 figs.

  13. Better metallurgy for process equipment

    SciTech Connect (OSTI)

    Rayner, R.E.

    1994-01-01

    Metallurgy choices have expanded significantly for process equipment and pumps used for handling difficult corrosive fluids. If they have been specifying the austenitic AISI types 316, 316L, 317, 317L or the newer first generation alloy 329 in their pumps, there is a strong message in recent literature. Based on tests and experience there are better, often less costly alternatives. In the case of CD[sub 4]MCu, N08020 and 904L, there are lower-cost material alternatives for many applications. For SA S31254 and SA N08367, there are some less aggressive can be substituted. These alternatives are the new second generation duplex steels. The lower cost of the duplex alloys is a result of the reduced nickel content, which is about half that of the standard austenitics. Also, their carbon content is low; the same as 316L and 317L for most alloys, including S31803. The second generation duplex alloys offer significant value improvement in a vast majority of applications over the common austenitics and ferritics. Further, their improved resistance to corrosion and improved physical properties relative to the expensive. and in many cases proprietary, highly corrosion-resistant, super-ferritics and super-austenitics, means that they can and should be considered as an alternative for applications where those materials are now overqualified. Strength, toughness and wide corrosion resistance are all-important properties and considerations for process pump materials. Combine these with competitive cost and there is an opportunity that must be investigated.

  14. Automatic monitoring of vibration welding equipment

    DOE Patents [OSTI]

    Spicer, John Patrick; Chakraborty, Debejyo; Wincek, Michael Anthony; Wang, Hui; Abell, Jeffrey A; Bracey, Jennifer; Cai, Wayne W

    2014-10-14

    A vibration welding system includes vibration welding equipment having a welding horn and anvil, a host device, a check station, and a robot. The robot moves the horn and anvil via an arm to the check station. Sensors, e.g., temperature sensors, are positioned with respect to the welding equipment. Additional sensors are positioned with respect to the check station, including a pressure-sensitive array. The host device, which monitors a condition of the welding equipment, measures signals via the sensors positioned with respect to the welding equipment when the horn is actively forming a weld. The robot moves the horn and anvil to the check station, activates the check station sensors at the check station, and determines a condition of the welding equipment by processing the received signals. Acoustic, force, temperature, displacement, amplitude, and/or attitude/gyroscopic sensors may be used.

  15. Equipment qualification research program: program plan

    SciTech Connect (OSTI)

    Dong, R.G.; Smith, P.D.

    1982-06-08

    The Lawrence Livermore National Laboratory (LLNL) under the sponsorship of the US Nuclear Regulatory Commission (NRC) has developed this program plan for research in equipment qualification (EQA). In this report the research program which will be executed in accordance with this plan will be referred to as the Equipment Qualification Research Program (EQRP). Covered are electrical and mechanical equipment under the conditions described in the OBJECTIVE section of this report. The EQRP has two phases; Phase I is primarily to produce early results and to develop information for Phase II. Phase I will last 18 months and consists of six projects. The first project is program management. The second project is responsible for in-depth evaluation and review of EQ issues and EQ processes. The third project is responsible for detailed planning to initiate Phase II. The remaining three projects address specific equipment; i.e., valves, electrical equipment, and a pump.

  16. dieSel/heAvy equipMent College of Rural and Community Development

    E-Print Network [OSTI]

    Hartman, Chris

    credits The diesel and heavy equipment mechanics program offers the student training in the maintenance and repair of trucks, buses and heavy equip- ment. This one-year certificate program emphasizes hands of equipment problems and make nec- essary repairs and adjustments from tune-ups to complete engine

  17. Touchjacking Attacks on Web in Android, iOS, and Windows Phone

    E-Print Network [OSTI]

    Du, Wenliang "Kevin"

    Touchjacking Attacks on Web in Android, iOS, and Windows Phone Tongbo Luo, Xing Jin, Ajai to interact with the Web, most mobile platforms, including Android, iOS, and Windows Phone, provide is called WebView in Android (it is called different names in other platforms). WebView im- plements

  18. Smart Golf Reservation iPhone App A. Rahimi, B.A. Shirazi, R. Makamson

    E-Print Network [OSTI]

    Collins, Gary S.

    Smart Golf Reservation iPhone App A. Rahimi, B.A. Shirazi, R. Makamson WSU REU 2011 ­ Electrical-0647705 Introduction This project is focused on creating a smart golf reservation iPhone app. After they book the tee time, the user will be redirected to the home page, and they will be sent

  19. MARS: Portable Support for Community-Based Research Using Cellular Phones

    E-Print Network [OSTI]

    Levis, Philip

    of their ubiquity, cellphones represent a nat- ural platform for enabling community-based participatory research phone programming. 1. INTRODUCTION In recent years cell phones have become a powerful com- puting in an active and em- powering way. For example, CBPR has been encouraged in health-related research [1

  20. iPoint: A Platform-independent Passive Information Kiosk for Cell Phones

    E-Print Network [OSTI]

    Noubir, Guevara

    Interpretted Information to the user INFORMATION ENERGY & Information iPoint Fig. 1. Outlook of the concept.g., solar). It should draw all its energy from the interacting smartphone. · Efficiency: the device should but harvests energy from the phone WiFi transmissions. The iPoint delivers information to the mobile phone

  1. An educational platform to demonstrate speech processing techniques on Android based smart phones and tablets

    E-Print Network [OSTI]

    An educational platform to demonstrate speech processing techniques on Android based smart phones learning styles. The application presented here is called "Speech Enhancement for Android (SEA)" and aims education; Speech enhancement; Android; Smart phone 1. Introduction Teaching digital signal processing (DSP

  2. A Speech Processing Research Platform for Android Based Smart Phones and Tablets

    E-Print Network [OSTI]

    A Speech Processing Research Platform for Android Based Smart Phones and Tablets Roger Chappel1 is called Speech Enhancement for Android (SEA) and incorporates past and present speech enhancement. Index Terms: speech enhancement, speech processing, spec- trogram, Android, smart phone 1. Introduction

  3. An Efficient Energy Management System for Android Phone Using Bayesian Networks

    E-Print Network [OSTI]

    Cho, Sung-Bae

    An Efficient Energy Management System for Android Phone Using Bayesian Networks Young-Seol Lee, proximity, light and orientation sensors for context-awareness. Energy-efficient battery management systems, it becomes an issue to develop the techniques for efficient energy management on a mobile phone [2, 3, 4

  4. 1-4244-1243-9/07/$25.00 2007 IEEE Mobile phone users in Kyrgyzstan

    E-Print Network [OSTI]

    Anderson, Richard

    1-4244-1243-9/07/$25.00 ©2007 IEEE Mobile phone users in Kyrgyzstan: A case study of identifying, including developing regions. This paper presents a case study outlining our process of using data from for the mobile phone platform because of its high level of adoption. This paper presents a case study of one idea

  5. 1/12/14 Technologyuses micro-windmills to recharge cell phones news.bio-medicine.org/?q=biology-technology-1/technology-uses-micro-windmills-to-recharge-cell-phones-29375 1/2

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    1/12/14 Technologyuses micro-windmills to recharge cell phones news.bio-medicine.org/?q=biology-technology-1/technology-uses-micro-windmills-to-recharge-cell-phones-29375 1/2 Navigation Links Biology News >> BIOLOGY >> TECHNOLOGY Technology uses micro-windmills to recharge cell phones Date:1/11/2014 [RSS

  6. 4/2/2014 Micro windmills maysoon recharge your mobile phone -Yahoo News Philippines https://ph.news.yahoo.com/micro-windmills-may-soon-recharge-mobile-phone-091158453.html 1/1

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    4/2/2014 Micro windmills maysoon recharge your mobile phone - Yahoo News Philippines https://ph.news.yahoo.com/micro-windmills-may-soon-recharge-mobile-phone-091158453.html 1/1 Micro windmills may, researchers are using windmills to generate power for modern devices such as our mobile phones. Of course

  7. 3/4/2014 Micro windmills maysoon recharge your mobile phone -Yahoo News Singapore http://sg.news.yahoo.com/micro-windmills-may-soon-recharge-mobile-phone-091158453.html 1/1

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    3/4/2014 Micro windmills maysoon recharge your mobile phone - Yahoo News Singapore http://sg.news.yahoo.com/micro-windmills-may-soon-recharge-mobile-phone-091158453.html 1/1 Micro windmills may soon recharge your mobile phone GMA News Online ­ Mon, Jan 13, 2014 Taking a cue from the Dutch, researchers are using windmills to generate power for modern devices

  8. 1/14/14 Technologyuses micro-windmills to recharge cell phones www.rdmag.com/news/2014/01/technology-uses-micro-windmills-recharge-cell-phones 1/10

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    1/14/14 Technologyuses micro-windmills to recharge cell phones www.rdmag.com/news/2014/01/technology-uses-micro-windmills-recharge-cell-phones 1/10 ADVERTISEMENT LOG IN REGISTERFIND MY COMPANY News ADVERTISEMENT Technology uses micro-windmills to recharge cell phones Mon, 01/13/2014 - 9:06am Get today's R

  9. 2/17/2014 TechnologyUses Micro-Windmills to Recharge Cell Phones http://powerelectronics.com/print/blog/technology-uses-micro-windmills-recharge-cell-phones?group_id=17022 1/2

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    2/17/2014 TechnologyUses Micro-Windmills to Recharge Cell Phones http://powerelectronics.com/print/blog/technology-uses-micro-windmills-recharge-cell-phones?group_id=17022 1/2 print | close Technology Uses Micro-Windmills to Recharge Cell Phones Fri, 2014-01-24 14:30 A UT Arlington (Texas) research

  10. 2/1/2014 Micro-Windmills Could Power Cell Phones Without Outlets | PopVulture Entertainment Network http://www.popvltr.com/2014/01/micro-windmills-could-power-cell-phones.html 1/3

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    2/1/2014 Micro-Windmills Could Power Cell Phones Without Outlets | PopVulture Entertainment Network http://www.popvltr.com/2014/01/micro-windmills-could-power-cell-phones.html 1/3 3 weeks ago [http-rao-chiao.php] electrical engineering professor designed a micro-windmill that might render urine-powered phones completely

  11. 2/1/2014 TinyMicro-Robotic Windmill Recharges Phone Batteries -Paperblog http://en.paperblog.com/tiny-micro-robotic-windmill-recharges-phone-batteries-769045/ 1/5

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    2/1/2014 TinyMicro-Robotic Windmill Recharges Phone Batteries - Paperblog http://en.paperblog.com/tiny-micro-robotic-windmill-recharges-phone-batteries-769045/ 1/5 HOME > SOCIETY Tiny Micro-Robotic Windmill Recharges Phone Batteries Posted on the 14 January 2014 by Dailyfusion One of Rao's micro-windmills is placed here on a penny. (Credit: University

  12. 2/6/2014 Micro-windmills mayone daycharge your phone battery| Cimeq | Inovation, electronic, Quebec http://www2.cimeq.qc.ca/en/monitoring/micro-windmills-may-one-day-charge-your-phone-battery 1/4

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    2/6/2014 Micro-windmills mayone daycharge your phone battery| Cimeq | Inovation, electronic, Quebec http://www2.cimeq.qc.ca/en/monitoring/micro-windmills-may-one-day-charge-your-phone-battery 1/4 Micro-windmills may one day charge your phone battery Energy generated from wind turbines or windmills is seen

  13. 2/27/2014 Micro-windmills can recharge mobile phones -Macworld Australia -Macworld Australia http://www.macworld.com.au/news/micro-windmills-can-recharge-mobile-phones-117033/#.Uw--XvldWa8 1/4

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    2/27/2014 Micro-windmills can recharge mobile phones - Macworld Australia - Macworld Australia http://www.macworld.com.au/news/micro-windmills-can-recharge-mobile-phones-117033/#.Uw--XvldWa8 1/4 Search Subscription » Digital Subscription » Current Issue » Back Issues Micro-windmills can recharge mobile phones 19

  14. 1/12/14 Micro-Windmills MayOne DayPower Your Smart Phone top.adlesse.com/en/i/349075109194317839/micro-windmills-may-one-day-power-your-smart-phone 1/3

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    1/12/14 Micro-Windmills MayOne DayPower Your Smart Phone top.adlesse.com/en/i/349075109194317839/micro-windmills-may-one-day-power-your-smart-phone 1/3 TOP.ADLESSE.COM ART EDUCATION ECONOMICS ENTERTAINMENT HEALTH LAW POLITICS SPORT TECHNOLOGY Micro-Windmills May One Day Power Your Smart Phone Content

  15. 2/1/2014 New Micro-Windmill TechnologyTo Recharge Cell Phone Batteries http://www.technocrazed.com/new-micro-windmill-technology-to-recharge-cell-phone-batteries 1/4

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    2/1/2014 New Micro-Windmill TechnologyTo Recharge Cell Phone Batteries http://www.technocrazed.com/new-micro-windmill-technology Micro-Windmill Technology To Recharge Cell Phone Batteries New Micro-Windmill Technology To Recharge to Do it Yourself - Free! #12;2/1/2014 New Micro-Windmill TechnologyTo Recharge Cell Phone Batteries

  16. Chip breaking system for automated machine tool

    DOE Patents [OSTI]

    Arehart, Theodore A. (Clinton, TN); Carey, Donald O. (Oak Ridge, TN)

    1987-01-01

    The invention is a rotary selectively directional valve assembly for use in an automated turret lathe for directing a stream of high pressure liquid machining coolant to the interface of a machine tool and workpiece for breaking up ribbon-shaped chips during the formation thereof so as to inhibit scratching or other marring of the machined surfaces by these ribbon-shaped chips. The valve assembly is provided by a manifold arrangement having a plurality of circumferentially spaced apart ports each coupled to a machine tool. The manifold is rotatable with the turret when the turret is positioned for alignment of a machine tool in a machining relationship with the workpiece. The manifold is connected to a non-rotational header having a single passageway therethrough which conveys the high pressure coolant to only the port in the manifold which is in registry with the tool disposed in a working relationship with the workpiece. To position the machine tools the turret is rotated and one of the tools is placed in a material-removing relationship of the workpiece. The passageway in the header and one of the ports in the manifold arrangement are then automatically aligned to supply the machining coolant to the machine tool workpiece interface for breaking up of the chips as well as cooling the tool and workpiece during the machining operation.

  17. Incidents of chemical reactions in cell equipment

    SciTech Connect (OSTI)

    Baldwin, N.M.; Barlow, C.R. [Uranium Enrichment Organization, Oak Ridge, TN (United States)

    1991-12-31

    Strongly exothermic reactions can occur between equipment structural components and process gases under certain accident conditions in the diffusion enrichment cascades. This paper describes the conditions required for initiation of these reactions, and describes the range of such reactions experienced over nearly 50 years of equipment operation in the US uranium enrichment program. Factors are cited which can promote or limit the destructive extent of these reactions, and process operations are described which are designed to control the reactions to minimize equipment damage, downtime, and the possibility of material releases.

  18. Subsea equipment marriage is top ROV priority

    SciTech Connect (OSTI)

    Redden, J.

    1985-04-01

    Interfacing subsea equipment with remotely operated vehicles (ROV's) and the further development of arctic-class units are the primary challenges facing manufacturers. Worldwide use of the ROV for drilling support has exploded during this decade as oil companies continue their search in deeper waters. If the unmanned vehicles are to become an even more integral tool of the oilman, experts say they must be able to perform more complex tasks. The evolution of more multi-purpose ROVs, however, hinges on the redesigning of subsea equipment. The severe limitations on subsea support (by ROVs) is the obsolete design associated with the subsea equipment itself. These limitations are discussed.

  19. Water-Using Equipment: Commercial and Industrial

    SciTech Connect (OSTI)

    Solana, Amy E.; Mcmordie, Katherine

    2006-01-24

    Water is an important aspect of many facets in energy engineering. While the previous article detailed domestic related water-using equipment such as toilets and showerheads, this article focuses on various types of water-using equipment in commercial and industrial facilities, including commercial dishwashers and laundry, single-pass cooling equipment, boilers and steam generators, cooling towers, and landscape irrigation. Opportunities for water and energy conservation are explained, including both technology retrofits and operation and maintenance changes. Water management planning and leak detection are also included as they are essential to a successful water management program.

  20. Failure Forewarning in NPP Equipment NERI2000-109 Final Project Report

    SciTech Connect (OSTI)

    Hively, LM

    2004-03-26

    The objective of this project is forewarning of machine failures in critical equipment at next-generation nuclear power plants (NPP). Test data were provided by two collaborating institutions: Duke Engineering and Services (first project year), and the Pennsylvania State University (Applied Research Laboratory) during the second and third project years. New nonlinear methods were developed and applied successfully to extract forewarning trends from process-indicative, time-serial data for timely, condition-based maintenance. Anticipation of failures in critical equipment at next-generation NPP will improve the scheduling of maintenance activities to minimize safety concerns, unscheduled non-productive downtime, and collateral damage due to unexpected failures. This approach provides significant economic benefit, and is expected to improve public acceptance of nuclear power. The approach is a multi-tiered, model-independent, and data-driven analysis that uses ORNL's novel nonlinear method to extract forewarning of machine failures from appropriate data. The first tier of the analysis provides a robust choice for the process-indicative data. The second tier rejects data of inadequate quality. The third tier removes signal artifacts that would otherwise confound the analysis, while retaining the relevant nonlinear dynamics. The fourth tier converts the artifact-filtered time-serial data into a geometric representation, that is then transformed to a discrete distribution function (DF). This method allows for noisy, finite-length datasets. The fifth tier obtains dissimilarity measures (DM) between the nominal-state DF and subsequent test-state DFs. Forewarning of a machine failure is indicated by several successive occurrences of the DM above a threshold, or by a statistically significant trend in the DM. This paradigm yields robust nonlinear signatures of degradation and its progression, allowing earlier and more accurate detection of the machine failure.

  1. Data Analysis Software for the ESPRESSO Science Machine

    E-Print Network [OSTI]

    Cupani, Guido; Cristiani, Stefano; González-Hernández, Jonay; Lovis, Christophe; Sousa, Sérgio; Vanzella, Eros; Di Marcantonio, Paolo; Mégevand, Denis

    2015-01-01

    ESPRESSO is an extremely stable high-resolution spectrograph which is currently being developed for the ESO VLT. With its groundbreaking characteristics it is aimed to be a "science machine", i.e., a fully-integrated instrument to directly extract science information from the observations. In particular, ESPRESSO will be the first ESO instrument to be equipped with a dedicated tool for the analysis of data, the Data Analysis Software (DAS), consisting in a number of recipes to analyze both stellar and quasar spectra. Through the new ESO Reflex GUI, the DAS (which will implement new algorithms to analyze quasar spectra) is aimed to get over the shortcomings of the existing software providing multiple iteration modes and full interactivity with the data.

  2. Visualizing criminal networks reconstructed from mobile phone records

    E-Print Network [OSTI]

    Ferrara, Emilio; Catanese, Salvatore; Fiumara, Giacomo

    2014-01-01

    In the fight against the racketeering and terrorism, knowledge about the structure and the organization of criminal networks is of fundamental importance for both the investigations and the development of efficient strategies to prevent and restrain crimes. Intelligence agencies exploit information obtained from the analysis of large amounts of heterogeneous data deriving from various informative sources including the records of phone traffic, the social networks, surveillance data, interview data, experiential police data, and police intelligence files, to acquire knowledge about criminal networks and initiate accurate and destabilizing actions. In this context, visual representation techniques coordinate the exploration of the structure of the network together with the metrics of social network analysis. Nevertheless, the utility of visualization tools may become limited when the dimension and the complexity of the system under analysis grow beyond certain terms. In this paper we show how we employ some int...

  3. 2/1/2014 Mobiles phones powered byWIND TURBINES: 'Micro-windmills' could be fitted to phones | Mail Online http://www.dailymail.co.uk/sciencetech/article-2538700/The-wind-turbines-MOBILES-Micro-windmills-smaller-grain-rice-one-day-fit-inside-charge-phones

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    2/1/2014 Mobiles phones powered byWIND TURBINES: 'Micro-windmills' could be fitted to phones | Mail Online http://www.dailymail.co.uk/sciencetech/article-2538700/The-wind-turbines-MOBILES-Micro-windmills-smaller-grain-rice-one-day-fit-inside-charge-phones.html 1/5 The mobiles powered by WIND TURBINES: 'Micro-windmills

  4. Micro-machined calorimetric biosensors

    DOE Patents [OSTI]

    Doktycz, Mitchel J. (Knoxville, TN); Britton, Jr., Charles L. (Alcoa, TN); Smith, Stephen F. (Loudon, TN); Oden, Patrick I. (Plano, TX); Bryan, William L. (Knoxville, TN); Moore, James A. (Powell, TN); Thundat, Thomas G. (Knoxville, TN); Warmack, Robert J. (Knoxville, TN)

    2002-01-01

    A method and apparatus are provided for detecting and monitoring micro-volumetric enthalpic changes caused by molecular reactions. Micro-machining techniques are used to create very small thermally isolated masses incorporating temperature-sensitive circuitry. The thermally isolated masses are provided with a molecular layer or coating, and the temperature-sensitive circuitry provides an indication when the molecules of the coating are involved in an enthalpic reaction. The thermally isolated masses may be provided singly or in arrays and, in the latter case, the molecular coatings may differ to provide qualitative and/or quantitative assays of a substance.

  5. Setup reduction approaches for machining

    SciTech Connect (OSTI)

    Gillespie, L.K.

    1997-04-01

    Rapid setup is a common improvement approach in press working operations such as blanking and shearing. It has paid major dividends in the sheet metal industry. It also has been a major improvement thrust for high-production machining operations. However, the literature does not well cover all the setup operations and constraints for job shop work. This review provides some insight into the issues involved. It highlights the floor problems and provides insights for further improvement. The report is designed to provide a quick understanding of the issues.

  6. Hypervelocity cutting machine and method

    DOE Patents [OSTI]

    Powell, James R. (Shoreham, NY); Reich, Morris (Queens, NY)

    1996-11-12

    A method and machine 14 are provided for cutting a workpiece 12 such as concrete. A gun barrel 16 is provided for repetitively loading projectiles 22 therein and is supplied with a pressurized propellant from a storage tank 28. A thermal storage tank 32,32A is disposed between the propellant storage tank 28 and the gun barrel 16 for repetitively receiving and heating propellant charges which are released in the gun barrel 16 for repetitively firing projectiles 22 therefrom toward the workpiece 12. In a preferred embodiment, hypervelocity of the projectiles 22 is obtained for cutting the concrete workpiece 12 by fracturing thereof.

  7. Free-piston cutting machine

    DOE Patents [OSTI]

    Ciccarelli, Gaby (East Setauket, NY); Subudhi, Manomohan (East Setauket, NY); Hall, Robert E. (Port Jefferson, NY)

    2000-01-01

    A cutting machine includes a gun barrel for receiving a projectile. A compression tube is disposed in flow communication with the barrel and includes a piston therein. A reservoir is disposed in flow communication with the tube and receives a first gas under pressure. A second gas fills the compression tube on a front face of the piston. And, the pressurized first gas is discharged into the tube on a back face of the piston to accelerate the piston through the tube for compressing the second gas, and in turn launching the projectile through the barrel to impact a workpiece.

  8. Hypervelocity cutting machine and method

    DOE Patents [OSTI]

    Powell, J.R.; Reich, M.

    1996-11-12

    A method and machine are provided for cutting a workpiece such as concrete. A gun barrel is provided for repetitively loading projectiles therein and is supplied with a pressurized propellant from a storage tank. A thermal storage tank is disposed between the propellant storage tank and the gun barrel for repetitively receiving and heating propellant charges which are released in the gun barrel for repetitively firing projectiles therefrom toward the workpiece. In a preferred embodiment, hypervelocity of the projectiles is obtained for cutting the concrete workpiece by fracturing thereof. 10 figs.

  9. Green Machine | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainableGlynn County, Georgia:Oregon:Corp Jump to:India Renewables PvtMachine Jump

  10. Machine Learning A Scientific Method

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousandReport) | SciTechAdministrationMTBE(Technical Report)Machine

  11. Consider Steam Turbine Drives for Rotating Equipment

    SciTech Connect (OSTI)

    Not Available

    2006-01-01

    This revised ITP tip sheet on steam turbine drives for rotating equipment provides how-to advice for improving the system using low-cost, proven practices and technologies.

  12. An Approach to Evaluating Equipment Efficiency Policies 

    E-Print Network [OSTI]

    Newsom, D. E.; Evans, A. R.

    1980-01-01

    The National Energy Conservation Policy Act of 1978 authorized studies of several types of industrial equipment to evaluate the technical and economic feasibility of labeling rules and minimum energy efficiency standards. An approach...

  13. Hot conditioning equipment conceptual design report

    SciTech Connect (OSTI)

    Bradshaw, F.W., Westinghouse Hanford

    1996-08-06

    This report documents the conceptual design of the Hot Conditioning System Equipment. The Hot conditioning System will consist of two separate designs: the Hot Conditioning System Equipment; and the Hot Conditioning System Annex. The Hot Conditioning System Equipment Design includes the equipment such as ovens, vacuum pumps, inert gas delivery systems, etc.necessary to condition spent nuclear fuel currently in storage in the K Basins of the Hanford Site. The Hot Conditioning System Annex consists of the facility of house the Hot Conditioning System. The Hot Conditioning System will be housed in an annex to the Canister Storage Building. The Hot Conditioning System will consist of pits in the floor which contain ovens in which the spent nuclear will be conditioned prior to interim storage.

  14. Solar Equipment Certification | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy BillsNo.Hydrogen4Energy SmoothEquipment Certification Solar Equipment

  15. Design and manufacturing of high precision roll-to-roll multilayer printing machine -- machine upgrade

    E-Print Network [OSTI]

    Zhu, Yufei

    2009-01-01

    In 2008, a group of MIT Master of Engineering students built a roll to roll machine for printing thiol onto a flexible gold substrate by self-assembly. The machine demonstrated good performance in high speed printing (400 ...

  16. Automated energy monitoring of machine tools

    E-Print Network [OSTI]

    Vijayaraghavan, Athulan; Dornfeld, David

    2010-01-01

    studies to correlate energy usage with the operations beinghas characterized machining energy usage solely based on theplanning, process energy usage was characterized solely by

  17. High pressure water jet mining machine

    DOE Patents [OSTI]

    Barker, Clark R. (Rolla, MO)

    1981-05-05

    A high pressure water jet mining machine for the longwall mining of coal is described. The machine is generally in the shape of a plowshare and is advanced in the direction in which the coal is cut. The machine has mounted thereon a plurality of nozzle modules each containing a high pressure water jet nozzle disposed to oscillate in a particular plane. The nozzle modules are oriented to cut in vertical and horizontal planes on the leading edge of the machine and the coal so cut is cleaved off by the wedge-shaped body.

  18. Interoperability Standards for Machine Tool Performance Monitoring

    E-Print Network [OSTI]

    Vijayaraghavan, Athulan; Dornfeld, David

    2008-01-01

    Performance Monitoring Athulan Vijayaraghavan, David Dornfeld Laboratory for Manufacturing and Sustainability,sustainability of the system. Keywords: Interoperability, machine tool communication, performance

  19. 6.685 Electric Machines, Fall 2003

    E-Print Network [OSTI]

    Kirtley, James L.

    Treatment of electromechanical transducers, rotating and linear electric machines. Lumped-parameter electromechanics of interaction. Development of device characteristics: energy conversion density, efficiency; and of ...

  20. Electricity Used by Office Equipment and Network Equipment in the U.S.: Detailed Report and Appendices

    E-Print Network [OSTI]

    LBNL-45917 Electricity Used by Office Equipment and Network Equipment in the U.S.: Detailed Report..............................................................................................46 #12;#12;1 Electricity Used by Office Equipment and Network Equipment in the U.S. Kaoru Kawamoto and network equipment, there has been no recent study that estimates in detail how much electricity

  1. Micro-machined resonator oscillator

    DOE Patents [OSTI]

    Koehler, D.R.; Sniegowski, J.J.; Bivens, H.M.; Wessendorf, K.O.

    1994-08-16

    A micro-miniature resonator-oscillator is disclosed. Due to the miniaturization of the resonator-oscillator, oscillation frequencies of one MHz and higher are utilized. A thickness-mode quartz resonator housed in a micro-machined silicon package and operated as a telemetered sensor beacon'' that is, a digital, self-powered, remote, parameter measuring-transmitter in the FM-band. The resonator design uses trapped energy principles and temperature dependence methodology through crystal orientation control, with operation in the 20--100 MHz range. High volume batch-processing manufacturing is utilized, with package and resonator assembly at the wafer level. Unique design features include squeeze-film damping for robust vibration and shock performance, capacitive coupling through micro-machined diaphragms allowing resonator excitation at the package exterior, circuit integration and extremely small (0.1 in. square) dimensioning. A family of micro-miniature sensor beacons is also disclosed with widespread applications as bio-medical sensors, vehicle status monitors and high-volume animal identification and health sensors. The sensor family allows measurement of temperatures, chemicals, acceleration and pressure. A microphone and clock realization is also available. 21 figs.

  2. Micro-machined resonator oscillator

    DOE Patents [OSTI]

    Koehler, Dale R. (Albuquerque, NM); Sniegowski, Jeffry J. (Albuquerque, NM); Bivens, Hugh M. (Albuquerque, NM); Wessendorf, Kurt O. (Albuquerque, NM)

    1994-01-01

    A micro-miniature resonator-oscillator is disclosed. Due to the miniaturization of the resonator-oscillator, oscillation frequencies of one MHz and higher are utilized. A thickness-mode quartz resonator housed in a micro-machined silicon package and operated as a "telemetered sensor beacon" that is, a digital, self-powered, remote, parameter measuring-transmitter in the FM-band. The resonator design uses trapped energy principles and temperature dependence methodology through crystal orientation control, with operation in the 20-100 MHz range. High volume batch-processing manufacturing is utilized, with package and resonator assembly at the wafer level. Unique design features include squeeze-film damping for robust vibration and shock performance, capacitive coupling through micro-machined diaphragms allowing resonator excitation at the package exterior, circuit integration and extremely small (0.1 in. square) dimensioning. A family of micro-miniature sensor beacons is also disclosed with widespread applications as bio-medical sensors, vehicle status monitors and high-volume animal identification and health sensors. The sensor family allows measurement of temperatures, chemicals, acceleration and pressure. A microphone and clock realization is also available.

  3. Develop a field grid system for yield mapping and machine control. Quarterly report, July 1, 1995--September 30, 1995

    SciTech Connect (OSTI)

    Hart, F.; Windish, J.

    1995-10-01

    Build and test the Field Grid Sense system for yield mapping and machine control during harvesting. Secondly, use Field Grid Sense with chemical application equipment to demonstrate a workable in-field system. More specifically, the operation of the patented hardware/software Field Grid Sense (FGS) system will be tested in crop harvesting to demonstrate the system`s utility and to analyze the flexibility of operation under true field conditions. Additionally, FGS will again be used with chemical application equipment - equipment that needs modification to correct one or two slight shortcomings. This action will create improved systems and establish the worthiness, efficiency and necessity of chemical application equipment that is controlled and directed via the FGS package.

  4. The geography and carbon footprint of mobile phone use in Cote d'Ivoire

    E-Print Network [OSTI]

    Salnikov, Vsevolod; Youn, Hyejin; Lambiotte, Renaud; Gastner, Michael T

    2013-01-01

    The newly released Orange D4D mobile phone data base provides new insights into the use of mobile technology in a developing country. Here we perform a series of spatial data analyses that reveal important geographic aspects of mobile phone use in Cote d'Ivoire. We first map the locations of base stations with respect to the population distribution and the number and duration of calls at each base station. On this basis, we estimate the energy consumed by the mobile phone network. Finally, we perform an analysis of inter-city mobility, and identify high-traffic roads in the country.

  5. International Conference on Machine Control & Guidance 2008 1 Geodetic Instrumentation for Use on Machine Bored

    E-Print Network [OSTI]

    1st International Conference on Machine Control & Guidance 2008 1 Geodetic Instrumentation for Use on Machine Bored Tunnels N. CLARKE-HACKSTON, M. MESSING, E. ULLRICH VMT GmbH, Bruchsal Germany Abstract of the machine and the tunnel support are able to operate at the desired rate. This paper describes

  6. Using Machine Affinity to Increase Science Throughput (Machine Affinity Characterization of the HPCMP Workload)

    E-Print Network [OSTI]

    Snavely, Allan

    on the "Standard" benchmark input at 128 processors, then the machines are ranked (fastest to slowest) as shownUsing Machine Affinity to Increase Science Throughput (Machine Affinity Characterization San Diego Supercomputer Center, University of California, San Diego, CA {allans, lcarring, agamst

  7. "Multi-machine" Strategy: The Other Path of the FESAC

    E-Print Network [OSTI]

    "Multi-machine" Strategy: The Other Path of the FESAC Burning Plasma Strategy Gerald Navratil Difference ITER Development Path FIRE Development Path `Single Machine Strategy' `Multi-machine Strategy Machine Strategy' `Multi-machine Strategy' `One Step to DEMO' Modular Strategy `Penultimate Step to DEMO

  8. I. Introduction Equivalent loading of induction machines are

    E-Print Network [OSTI]

    Szabados, Barna

    phase synchronous machine. If the synchronous machine had a rotor with two windings with a spacial phaseI. Introduction Equivalent loading of induction machines are used to test machines for temperature loading tests, lead to the conclusion that synthetic loading is a viable simple test for large machines

  9. Recent PostsJanuary 12, 2014Teeny tiny windmills can recharge phones (/blogs/news/11532797-teeny-tiny-windmills-can-

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    (/blogs/news/11510797- in-smart-homes- internet-connected- gadgets-abound) Cell Phone Radiation Protection - Voodoo or Real Science (/blogs/news/11497329- cell-phone-radiation- protection-voodoo-or- real-science) Cell Phone Radiation Protection - Voodoo or Real Science (/blogs/news/11486153- cell-phone-radiation

  10. Abatement of Air Pollution: Air Pollution Control Equipment and...

    Broader source: Energy.gov (indexed) [DOE]

    contain instructions for the operation and monitoring of air pollution control equipment, as well as comments on procedures in the event of equipment breakdown, failure, and...

  11. Early Markets: Fuel Cells for Material Handling Equipment | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Early Markets: Fuel Cells for Material Handling Equipment Early Markets: Fuel Cells for Material Handling Equipment This fact sheet describes the use of hydrogen fuel cells to...

  12. Cold-Start Emissions Control in Hybrid Vehicles Equipped with...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Emissions Control in Hybrid Vehicles Equipped with a Passive Adsorber for Hydrocarbons and NOx Cold-Start Emissions Control in Hybrid Vehicles Equipped with a Passive Adsorber for...

  13. Data Center Efficiency and IT Equipment Reliability at Wider...

    Energy Savers [EERE]

    Data Center Efficiency and IT Equipment Reliability at Wider Operating Temperature and Humidity Ranges Data Center Efficiency and IT Equipment Reliability at Wider Operating...

  14. Dispensing Equipment Testing With Mid-Level Ethanol/Gasoline...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dispensing Equipment Testing With Mid-Level EthanolGasoline Test Fluid Dispensing Equipment Testing With Mid-Level EthanolGasoline Test Fluid The National Renewable Energy...

  15. Guide to Low-Emission Boiler and Combustion Equipment Selection...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low-Emission Boiler and Combustion Equipment Selection Guide to Low-Emission Boiler and Combustion Equipment Selection The guide provides background information about various types...

  16. Saving Energy and Money with Appliance and Equipment Standards...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Equipment Standards in the United States Overview Appliance and equipment efficien- cy standards have served as one of the nation's most effective policies for...

  17. Multitasking without Compromise: a Virtual Machine Evolution

    E-Print Network [OSTI]

    Baumgartner, Gerald

    Multitasking without Compromise: a Virtual Machine Evolution Grzegorz Czajkowski Laurent Daynès Sun grzegorz.czajkowski@sun.com laurent.daynes@sun.com ABSTRACT The Multitasking Virtual Machine (called from collector to provide best-effort management of a portion of the heap space, and a transparent and automated

  18. Synchronous Machine Modeling 1.0 Introduction

    E-Print Network [OSTI]

    McCalley, James D.

    windings There are 5 physical windings on a synchronous generator. · The 3 stator (phase) windings, denotedSynchronous Machine Modeling 1.0 Introduction Our motivation at this point is to put you in a position to understand synchronous machine modeling for power system dynamic analysis. If you take EE 457

  19. DRAWING MACHINES AN ARTS AND ENGINEERING COLLABORATION

    E-Print Network [OSTI]

    Drawing Machines Arduino, foam core, masking tape #12;High School Summer Workshop ! Become familiar with drawing machines ! Explore Arduino and components ! Prototype with foam board ! Explore components Explore Computer control with Arduino Introduces computing in an arts context Introduces art in a computing

  20. Support Vector Machines with Example Dependent Costs

    E-Print Network [OSTI]

    Brefeld, Ulf

    Support Vector Machines with Example Dependent Costs Ulf Brefeld, Peter Geibel, and Fritz Wysotzki neu- ral networks and machine learning, typically, do not take any costs into account or allow only costs depending on the classes of the examples that are used for learning. As an extension of class

  1. 9.1 Introduction A scanner is a device that looks and works much like a xerox machine except that the

    E-Print Network [OSTI]

    Boyd, John P.

    are the most common. They vary in price, but a decent scanner is only $100. Many home computers now have a laser as the light source; xerox machines also employ laser light sources, and indeed the mechanics and electronics of the moving laser is very similar in both types of equipment. The reflected or transmitted light

  2. Aligning product and supply chain strategies in the mobile phone industry

    E-Print Network [OSTI]

    Scanlon, Robert (Robert Curtis)

    2009-01-01

    Designing and managing the supply chain of a company in the mobile phone industry is particularly challenging. Short product lifecycles, rapidly evolving technology, globally linked distribution networks, increasing product ...

  3. India and China: A Comparative Analysis of Mobile Phones in Agriculture

    E-Print Network [OSTI]

    Bonthu, Prashanthi

    2014-05-31

    In 2010, China and India were named the first and second largest mobile phone markets in the world based on their number of subscribers. India and China have focused on extending their telecommunication services into rural areas for socio...

  4. Offsetting Displays on Mobile Projector Phones Jessica R. Cauchard, Mike Fraser, Jason Alexander, Sriram Subramanian

    E-Print Network [OSTI]

    Subramanian, Sriram

    , Sriram Subramanian University of Bristol Dept. of Computer Science MVB, Woodland Rd Bristol, BS8 1UB, UK cauchard, fraser, jason, sriram @cs.bristol.ac.uk ABSTRACT Emerging phone handsets include embedded

  5. Batch Scheduling of Recurrent Applications for Energy Savings on Mobile Phones 

    E-Print Network [OSTI]

    Marina, Mahesh; Calder, Matthew

    Recurrent applications that mostly run in the background are a significant source of power consumption on battery-limited mobile phones. We highlight the pitfalls of scheduling such applications independently without ...

  6. Analysis of email and phone queuing systems in a world-wide contact center network

    E-Print Network [OSTI]

    Carter, Kristopher (Kristopher W.)

    2008-01-01

    Contact centers are operated by companies to answer customer inquiries via phone calls or email. Customers often equate the service they are provided while interacting with a contact center to the quality of a company's ...

  7. Franois Barthelat, Ph.D, Ing. Department of Mechanical Engineering Phone: (514) 3986318

    E-Print Network [OSTI]

    Barthelat, Francois

    1 François Barthelat, Ph.D, Ing. Department of Mechanical Engineering Phone: (514 APPOINTMENTS Associate Professor, Mechanical Engineering, McGill University (2012present) Assistant Professor, Mechanical Engineering, McGill University (20062012) Associate Member, Biomedical Engineering

  8. Campus Building Location Contact Assistance available Phone Email Jubilee Campus Dearing Building

    E-Print Network [OSTI]

    Qu, Rong

    Campus Building Location Contact Assistance available Phone Email Jubilee Campus Dearing Building Building Attendant's office Building Attendant Distribute puncture repair kit and maps. Ext. 66053 King Centre Medical School Main Reception Building Attendant Distribute puncture repair kit and maps. Ext

  9. Evaluating the accuracy of data collection on mobile phones: A study of forms, SMS, and voice

    E-Print Network [OSTI]

    Patnaik, Somani

    While mobile phones have found broad application in reporting health, financial, and environmental data, there has been little study of the possible errors incurred during mobile data collection. This paper provides the ...

  10. An Android Smart Phone Interface for a Dynamic Direction of Arrival System 

    E-Print Network [OSTI]

    Revier, Daniel

    2012-05-02

    areas to complement the shortcomings of GPS. These small networks, termed Local Positioning Systems (LPS), were implemented via Android OS mobile phone devices in coordination with a ded- icated direction-of-arrival (DOA) server through a polarization...

  11. New Mexico State Cooperative Extension Service Phone 505/646-1131

    E-Print Network [OSTI]

    New Mexico State University Cooperative Extension Service Phone 505/646-1131 P.O. Box 30003 MSC 3AE Water Quality Program Coordinator Responsible for development of program printed and Internet materials

  12. Novel machine learning and correlation network methods for genomic data

    E-Print Network [OSTI]

    Song, Lin

    2013-01-01

    Prediction accuracy in the UCI machine learning bench- markbetween features in the UCI machine learning benchmark data.SVM: support vector machine. CHAPTER 2 FIGURES Figure 2.1:

  13. Combining Bilingual and Comparable Corpora for Low Resource Machine Translation

    E-Print Network [OSTI]

    Plotkin, Joshua B.

    Combining Bilingual and Comparable Corpora for Low Resource Machine Translation Ann Irvine Center, Malayalam, Hindi, and Urdu into English. 1 Introduction Standard statistical machine translation (SMT Science Dept. University of Pennsylvania Abstract Statistical machine translation (SMT) per- formance

  14. A hybrid type small 5-axis CNC milling machine

    E-Print Network [OSTI]

    Son, Seung-Kil, 1964-

    2002-01-01

    5-axis CNC milling machines are important in a number of industries ranging from aerospace to consumer-die-mold machining because they can deliver high machining accuracy with a spindle tilting capacity. Most of these ...

  15. Electrical Metering Equipment and Sensors Appendix D -Electrical Metering Equipment and Sensors

    E-Print Network [OSTI]

    Appendix D ­ Electrical Metering Equipment and Sensors #12;D.1 Appendix D - Electrical Metering Equipment and Sensors D.1 Controllable Electrical Panel Figure D.1. Square D Power Link Electrical Panel D.1.1 Schneider Electric/Square D Power Link G3 Control System The Square D Powerlink G3 offers programmable

  16. Rapid Compression Machine ? A Key Experimental Device to Effectively...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Compression Machine A Key Experimental Device to Effectively Collaborate with Basic Energy Sciences Rapid Compression Machine A Key Experimental Device to Effectively...

  17. KCP relocates 18-ton machine | National Nuclear Security Administratio...

    National Nuclear Security Administration (NNSA)

    relocations. It took nearly three days to disassemble the machine and prepare it for transport. The machine was partially disassembled, removing auxiliary pieces from the main...

  18. Advnaced Power Electronics and Electric Machines (APEEM) R&D...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advnaced Power Electronics and Electric Machines (APEEM) R&D Program Overview Advnaced Power Electronics and Electric Machines (APEEM) R&D Program Overview 2010 DOE Vehicle...

  19. Rage against the machines: how subjects play against learning algorithms

    E-Print Network [OSTI]

    Duersch, Peter; Kolb, Albert; Oechssler, Jörg; Schipper, Burkhard C.

    2010-01-01

    Rage against the machines—How Subjects Learn to Play Againstagainst the machines: how subjects play against learningexperiment to explore how subjects learn to play against

  20. APPROVED MATERIALS LIST FOR ALSEP EQUIPMENT

    E-Print Network [OSTI]

    Rathbun, Julie A.

    APPROVED MATERIALS LIST FOR ALSEP EQUIPMENT Addendum 1 ATU 242 I (E1) I PAGE-~ OF 39 DATE July 15, 1971 1. Amendment 1 to ATM 242 is issued to incorporate additional non-metallic materials which can operation and storage period. 2. Show alternate material designation for EPON adhesives made by Hysol after

  1. Engineering study of riser equipment contamination

    SciTech Connect (OSTI)

    BOGER, R.M.

    1999-08-25

    This Engineering Study was to evaluate the current equipment and operating procedures to determine if changes could be made to improve ALARA and evaluate the feasibility of implementing the proposed solutions. As part of this study input from the cognizant characterization engineers and operating sampling crews was obtained and evaluated for ALARA improvements.

  2. Research equipment: Surface Acoustic Wave (SAW) devices

    E-Print Network [OSTI]

    Gizeli, Electra

    Research equipment: Surface Acoustic Wave (SAW) devices: Operating frequencies @50MHz, 104MHz, 110 outputs measuring the real-time change of the phase and amplitude of the acoustic wave. More specifically with Dissipation monitoring (QCM-D): Qsense D-300 for real-time acoustic measurements at low frequencies (5-35MHz

  3. On Storage Operators LAMA -Equipe de Logique

    E-Print Network [OSTI]

    Nour, Karim

    On Storage Operators Karim NOUR LAMA - Equipe de Logique Universit´e de Savoie 73376 Le Bourget du Lac e-mail nour@univ-savoie.fr Abstract In 1990 Krivine (1990b) introduced the notion of storage shown that there is a very simple type in the AF2 type system for storage operators using Godel

  4. Test and Test Equipment Joshua Lottich

    E-Print Network [OSTI]

    Patel, Chintan

    Test and Test Equipment Joshua Lottich CMPE 640 11/23/05 #12;Testing Verifies that manufactured chip meets design specifications. Cannot test for every potential defect. Modeling defects as faults allows for passing and failing of chips. Ideal test would capture all defects and pass only chips

  5. Project Sponsor: An Original Equipment Manufacturer (confidential)

    E-Print Network [OSTI]

    Mease, Kenneth D.

    transfer within the boiler while staying within the O2 concentration limits set by existing equipment high concentration of CO2 in the gas flowing through the boiler, the difference in physical properties air into the boiler, a downstream CO2purification step (cryogenic) is required to meet

  6. EQUIPMENT OR PROCESS UCLA/ACADEMIC

    E-Print Network [OSTI]

    Jalali. Bahram

    Cleanroom Usage $21 $58 0.1 2 AMAT 7830i - CD SEM $50 $110 0.5 3 ASML PAS 5500/200 - Stepper $50 $120 1 4 Monthly Minimum waved if no charges are accumulated in that month Cleanroom Usage Cap: Academic Cleanroom Usage capped at $1000/user per month Industry Cleanroom Usage capped $4000/user per month Equipment

  7. University of California Policy Personal Protective Equipment

    E-Print Network [OSTI]

    Aluwihare, Lihini

    and regulatory standards require the supervisor to select Personal Protective Equipment (PPE) for workers under is included in Appendix A. Laboratory/Technical Areas: For the purposes of this policy, a laboratory/technical, the default "supervisor" in laboratory/technical areas is the Principal Investigator. Use or Storage

  8. Safety Topic: Rota/ng Equipment

    E-Print Network [OSTI]

    Cohen, Robert E.

    Safety Topic: Rota/ng Equipment Jus/n Kleingartner #12;Safety protocols for opera/ng a lathe · Dos: ­ Locate emergency stop bu?on before use ­ Be sure 2 #12;Safety protocols for opera/ng a lathe · Don'ts: ­ Do not wear gloves

  9. Right-Sizing Laboratory Equipment Loads

    SciTech Connect (OSTI)

    Frenze, David; Greenberg, Steve; Mathew, Paul; Sartor, Dale; Starr, William

    2005-11-29

    Laboratory equipment such as autoclaves, glass washers, refrigerators, and computers account for a significant portion of the energy use in laboratories. However, because of the general lack of measured equipment load data for laboratories, designers often use estimates based on 'nameplate' rated data, or design assumptions from prior projects. Consequently, peak equipment loads are frequently overestimated. This results in oversized HVAC systems, increased initial construction costs, and increased energy use due to inefficiencies at low part-load operation. This best-practice guide first presents the problem of over-sizing in typical practice, and then describes how best-practice strategies obtain better estimates of equipment loads and right-size HVAC systems, saving initial construction costs as well as life-cycle energy costs. This guide is one in a series created by the Laboratories for the 21st Century ('Labs21') program, a joint program of the U.S. Environmental Protection Agency and U.S. Department of Energy. Geared towards architects, engineers, and facilities managers, these guides provide information about technologies and practices to use in designing, constructing, and operating safe, sustainable, high-performance laboratories.

  10. SONIC EQUIPMENT FOR TRACKING INDIVIDUAL FISH

    E-Print Network [OSTI]

    . The equipment can be used in varied hydraulic conditions and in fresh or salt water to track the movements of individual adult salmon in relation to Columbia River dams. Each dam on the Columbia River presents a chance for delay in migration with injurious consequences if the delay is prolonged. Since new dams are under

  11. Electric machine for hybrid motor vehicle

    DOE Patents [OSTI]

    Hsu, John Sheungchun (Oak Ridge, TN)

    2007-09-18

    A power system for a motor vehicle having an internal combustion engine and an electric machine is disclosed. The electric machine has a stator, a permanent magnet rotor, an uncluttered rotor spaced from the permanent magnet rotor, and at least one secondary core assembly. The power system also has a gearing arrangement for coupling the internal combustion engine to wheels on the vehicle thereby providing a means for the electric machine to both power assist and brake in relation to the output of the internal combustion engine.

  12. Evaluation of Machine Guarding course taught in Richland, Washington, September 1--3, 1992

    SciTech Connect (OSTI)

    Wright, T.S.

    1993-03-01

    This section summarizes trainee evaluations for the Safety Training Section course, ``Machine Guarding`` which was conducted September 1-3, 1992 in Richland, Washington. This was the fifth time the course has been taught. This report summarizes the quantitative course evaluations that trainees provided upon completion of the course. Sections 1.3 and 1.4 provide written comments and examination results. Also provided are instructors` suggestions for improvement. Ratings were generally high, especially for the section on Subpart 0 guarding, which was consistent with the trainees` comments. Most of the trainees wanted a more in-depth look at Machine Guarding regulations. Lockout/ragout information and more site tours were frequently requested. In addition, the trainees were not interested in the subsection on personal protective equipment and electrical regulations.

  13. Evaluation of Machine Guarding course taught in Richland, Washington, September 1--3, 1992

    SciTech Connect (OSTI)

    Wright, T.S.

    1993-03-01

    This section summarizes trainee evaluations for the Safety Training Section course, Machine Guarding'' which was conducted September 1-3, 1992 in Richland, Washington. This was the fifth time the course has been taught. This report summarizes the quantitative course evaluations that trainees provided upon completion of the course. Sections 1.3 and 1.4 provide written comments and examination results. Also provided are instructors' suggestions for improvement. Ratings were generally high, especially for the section on Subpart 0 guarding, which was consistent with the trainees' comments. Most of the trainees wanted a more in-depth look at Machine Guarding regulations. Lockout/ragout information and more site tours were frequently requested. In addition, the trainees were not interested in the subsection on personal protective equipment and electrical regulations.

  14. Machinability study of Aermet 100

    SciTech Connect (OSTI)

    Squire, D.V.; Syn, C.K.; Fix, B.L.

    1995-02-08

    Machinability of Aermet 100, an ultrahigh strength alloy developed for Navy by Carpenter Technology as a candidate material for aircraft landing gear application, was studied by performing single-point turning tests. Coated and uncoated carbides, ceramic, and cermet cutting tool inserts of a square geometry (SNG 432 type) were used. Round stock workpieces were tested in the as - received, unaged condition and without using any cutting fluid. The turning tests for each tool material were conducted by (i) first establishing the cutting conditions that would allow the continued generation of broken chips during a given cutting test, (ii) measuring intermittently the flank wear as a function of cutting time under such established cutting conditions for discontinuous broken chips, and (iii) determining the tool life using the criteria specified in the ISO Standard 3685: 1993(E). Cutting tools except some uncoated carbide and ceramic were used with a mechanical chip breaker to induce chip breakage and avoid the generation of long continuous chips. The results obtained include the optimal cutting conditions for discontinuous chips, tool wear - cutting time curves, and records of tool life and tool failure mode for each tool material. From the measured tool life and cutting conditions, the amount of material removed by each cutting material was calculated. Coated carbide with CVD tri-phase coating showed the longest tool life that exceeded the twelve minute criterion and removed the highest amount of material per tool. Other tools failed by cutting edge chipping and their lives were shorter.

  15. 6.867 Machine Learning, Fall 2002

    E-Print Network [OSTI]

    Jaakkola, Tommi S. (Tommi Sakari)

    Principles, techniques, and algorithms in machine learning from the point of view of statistical inference; representation, generalization, and model selection; and methods such as linear/additive models, active learning, ...

  16. Growth machine theory: a qualitative analysis 

    E-Print Network [OSTI]

    Smith, Gavin Paul

    1993-01-01

    of land inherent in growth machine theory, does not necessarily result in a dialectic, win-lose situation. Furthermore, it is argued that the growth coalition may not always ado t a unidimensional roach to development where further growth...

  17. Passive machine augmented composite for multifunctional properties 

    E-Print Network [OSTI]

    Kim, Jong Hyun

    2005-11-01

    This dissertation studies by experiment and numerical analysis an advanced composite material (Machine Augmented Composite or MAC) for enhancement of the passive damping while maintaining its stiffness. This MAC is composed of a pre-buckled wall...

  18. Automated energy monitoring of machine tools

    E-Print Network [OSTI]

    Vijayaraghavan, Athulan; Dornfeld, David

    2010-01-01

    in context with the energy consumption data. 4.2. Reasoning:to decrease energy consumption, energy data has to be placedthe energy consumption and operational data of machine tools

  19. Non-equilibrium quantum heat machines

    E-Print Network [OSTI]

    Rober Alicki; David Gelbwaser-Klimovsky

    2015-07-07

    Standard heat machines (engine, heat pump, refrigerator) are composed of a system ("working fluid") coupled to at least two equilibrium baths at different temperatures and periodically driven by an external device (piston or rotor) called sometimes work reservoir. The aim of this paper is to go beyond this scheme by considering environments which are stationary but cannot be decomposed into few baths at thermal equilibrium. Such situations are important, for example in solar cells, chemical machines in biology, various realizations of laser cooling or nanoscopic machines driven by laser radiation. We classify non-equilibrium baths depending on their thermodynamic behavior and show that the efficiency of heat machines operating under their influences is limited by a generalized Carnot bound.

  20. Use of virtual machines in information systems

    E-Print Network [OSTI]

    Donovan, John J.

    1975-01-01

    This paper presents a scheme using the virtual machine concept for creating: 1) An environment for increasing the effectiveness of researchers who must use analytical, modeling systems and have complex data management ...

  1. Transition metal complex-based molecular machines 

    E-Print Network [OSTI]

    Sooksawat, Dhassida

    2015-06-30

    Inspired by the performance and evolutionarily-optimised natural molecular machines that carry out all the essential tasks contributing to the molecular basis of life, chemists aim towards fabricating synthetic molecular ...

  2. Finite state machines from feature grammars 

    E-Print Network [OSTI]

    Black, Alan W

    1989-01-01

    This paper describes the conversion of a set of feature grammar rules into a deterministic finite state machine that accepts the same language (or at least a well-defined related language).

  3. Teleportation using continuous variable quantum cloning machine

    E-Print Network [OSTI]

    Satyabrata Adhikari

    2008-02-15

    We show that an unknown quantum state in phase space can be teleported via three-mode entanglement generated by continuous variable quantum cloning machine (transformation). Further, proceeding with our teleportation protocol we are able to improve the fidelity of teleportation obtained by Loock et.al. [Phys.Rev.Lett. 84, 3482(2000)]. Also we study here the entanglement between the two output copies from cloning machine.

  4. Machine Learning for Precise Quantum Measurement

    E-Print Network [OSTI]

    Alexander Hentschel; Barry C. Sanders

    2010-02-25

    Adaptive feedback schemes are promising for quantum-enhanced measurements yet are complicated to design. Machine learning can autonomously generate algorithms in a classical setting. Here we adapt machine learning for quantum information and use our framework to generate autonomous adaptive feedback schemes for quantum measurement. In particular our approach replaces guesswork in quantum measurement by a logical, fully-automatic, programmable routine. We show that our method yields schemes that outperform the best known adaptive scheme for interferometric phase estimation.

  5. Method of fabricating a micro machine

    DOE Patents [OSTI]

    Stalford, Harold L

    2014-11-11

    A micro machine may be in or less than the micrometer domain. The micro machine may include a micro actuator and a micro shaft coupled to the micro actuator. The micro shaft is operable to be driven by the micro actuator. A tool is coupled to the micro shaft and is operable to perform work in response to at least motion of the micro shaft.

  6. Requisition's, Donations, Gifts, Transfers of Equipment There are several ways the University acquires equipment.

    E-Print Network [OSTI]

    as either a Donation or a Transfer. The Property Management Office is re- sponsible for capturing the cost equipment received or purchased. 1 Issue 2 May 2014 The end is near! VOLUME 1 focusDE-MYSTIFYING CAPITA L

  7. T-670: Skype Input Validation Flaw in 'mobile phone' Profile Entry Permits Cross-Site Scripting Attacks

    Broader source: Energy.gov [DOE]

    The software does not properly filter HTML code from user-supplied input in the The "mobile phone" profile entry before displaying the input.

  8. MACHINE LEARNING IN A DYNAMIC WORLD Panel Dmussion

    E-Print Network [OSTI]

    Antsaklis, Panos

    MACHINE LEARNING IN A DYNAMIC WORLD Panel Dmussion Miecsyslaw M. Kohr Panel O&m and Editor. Michal~gi,George Mason University R.S.Sutton, GTE Laboratories Machine Learning was established of machine learning research was in Cybernetic Systems and Adaptive Control. Machine Learning has been

  9. NC machine tool path generation from CSG part

    E-Print Network [OSTI]

    Bobrow, James E.

    NC machine tool path generation from CSG part representations James E Bobrow Recent improvements for machine tool path generation. Current machining algorithms require that any port geometric information modelling system is used. Thispaper presents o method for generating numerically-controlled milling machine

  10. On-Line Machine Covering Yossi Azar1

    E-Print Network [OSTI]

    Azar, Yossi

    On-Line Machine Covering Yossi Azar1 ,Leah Epstein2 1 Dept. of Computer Science, Tel of scheduling a sequence of jobs to m parallel machines as to maximize the minimum load over the machines. This situation corresponds to a case that a system which consists of the m machines is alive (i.e. productive

  11. Use of a Machine Control & Guidance System Determination of Performance

    E-Print Network [OSTI]

    1 Use of a Machine Control & Guidance System Determination of Performance Protection against. Dr. P. Rausch Why Machine Guidance? 1 Introduction Machine Guidance allows higher performance. Higher someone checking down below: 09.07.2008 3 ,,Machine control by shout and gesture". Planned Excavator Job

  12. this version: May 13, 2011 A semantic virtual machine

    E-Print Network [OSTI]

    Neumaier, Arnold

    this version: May 13, 2011 A semantic virtual machine Arnold Neumaier Peter Schodl Fakult¨at f://www.mat.univie.ac.at/neum/FMathL Abstract A semantic virtual machine (SVM) is a variant of a programable register machine that combines the transparency and simplicity of the action of a Turing machine with a clearly arranged assembler

  13. this version: July 7, 2009 A semantic Turing machine

    E-Print Network [OSTI]

    Neumaier, Arnold

    this version: July 7, 2009 A semantic Turing machine Arnold Neumaier Peter Schodl Fakultät für machine (STM) is a variant of a programable register machine that combines the transparency and simplicity of the action of a Turing machine with a clearly arranged assembler-style programming language and a user

  14. Dairy Manure Handling Systems and Equipment

    E-Print Network [OSTI]

    Sweeten, John M.

    1983-01-01

    Equipment Type System Tank Wagon, Surface spread' Tank Wagon , Surface spread' Tank Wagon, Soil injection' Irrigation , Stationary gun Irrigation , Traveling gun Irrigation, Traveling gun Nominal capacity 1,500 gal. 3,000 gal. 3,000 gal... wagon and 2000 It. haul distance labor. The total cost of pump, irrigation pipe, and traveling gun sprinkler is similar to the cost of a tank wagon system excluding the power unit (tractor) . Direct slurry irrigation systems can serve the dual...

  15. Measured Peak Equipment Loads in Laboratories

    SciTech Connect (OSTI)

    Mathew, Paul A.

    2007-09-12

    This technical bulletin documents measured peak equipment load data from 39 laboratory spaces in nine buildings across five institutions. The purpose of these measurements was to obtain data on the actual peak loads in laboratories, which can be used to rightsize the design of HVAC systems in new laboratories. While any given laboratory may have unique loads and other design considerations, these results may be used as a 'sanity check' for design assumptions.

  16. Direct Liquid Cooling for Electronic Equipment

    SciTech Connect (OSTI)

    Coles, Henry; Greenberg, Steve

    2014-03-01

    This report documents a demonstration of an electronic--equipment cooling system in the engineering prototype development stage that can be applied in data centers. The technology provides cooling by bringing a water--based cooling fluid into direct contact with high--heat--generating electronic components. This direct cooling system improves overall data center energy efficiency in three ways: High--heat--generating electronic components are more efficiently cooled directly using water, capturing a large portion of the total electronic equipment heat generated. This captured heat reduces the load on the less--efficient air--based data center room cooling systems. The combination contributes to the overall savings. The power consumption of the electronic equipment internal fans is significantly reduced when equipped with this cooling system. The temperature of the cooling water supplied to the direct cooling system can be much higher than that commonly provided by facility chilled water loops, and therefore can be produced with lower cooling infrastructure energy consumption and possibly compressor-free cooling. Providing opportunities for heat reuse is an additional benefit of this technology. The cooling system can be controlled to produce high return water temperatures while providing adequate component cooling. The demonstration was conducted in a data center located at Lawrence Berkeley National Laboratory in Berkeley, California. Thirty--eight servers equipped with the liquid cooling system and instrumented for energy measurements were placed in a single rack. Two unmodified servers of the same configuration, located in an adjacent rack, were used to provide a baseline. The demonstration characterized the fraction of heat removed by the direct cooling technology, quantified the energy savings for a number of cooling infrastructure scenarios, and provided information that could be used to investigate heat reuse opportunities. Thermal measurement data were used with data center energy use modeling software to estimate overall site energy use. These estimates show that an overall data center energy savings of approximately 20 percent can be expected if a center is retrofitted as specified in the models used. Increasing the portion of heat captured by this technology is an area suggested for further development.

  17. Detecting particles with cell phones: the Distributed Electronic Cosmic-ray Observatory

    E-Print Network [OSTI]

    Vandenbroucke, Justin; Karn, Peter; Meehan, Matthew; Plewa, Matthew; Ruggles, Tyler; Schultz, David; Peacock, Jeffrey; Simons, Ariel Levi

    2015-01-01

    In 2014 the number of active cell phones worldwide for the first time surpassed the number of humans. Cell phone camera quality and onboard processing power (both CPU and GPU) continue to improve rapidly. In addition to their primary purpose of detecting photons, camera image sensors on cell phones and other ubiquitous devices such as tablets, laptops and digital cameras can detect ionizing radiation produced by cosmic rays and radioactive decays. While cosmic rays have long been understood and characterized as a nuisance in astronomical cameras, they can also be identified as a signal in idle camera image sensors. We present the Distributed Electronic Cosmic-ray Observatory (DECO), a platform for outreach and education as well as for citizen science. Consisting of an app and associated database and web site, DECO harnesses the power of distributed camera image sensors for cosmic-ray detection.

  18. Detecting particles with cell phones: the Distributed Electronic Cosmic-ray Observatory

    E-Print Network [OSTI]

    Justin Vandenbroucke; Silvia Bravo; Peter Karn; Matthew Meehan; Matthew Plewa; Tyler Ruggles; David Schultz; Jeffrey Peacock; Ariel Levi Simons

    2015-10-26

    In 2014 the number of active cell phones worldwide for the first time surpassed the number of humans. Cell phone camera quality and onboard processing power (both CPU and GPU) continue to improve rapidly. In addition to their primary purpose of detecting photons, camera image sensors on cell phones and other ubiquitous devices such as tablets, laptops and digital cameras can detect ionizing radiation produced by cosmic rays and radioactive decays. While cosmic rays have long been understood and characterized as a nuisance in astronomical cameras, they can also be identified as a signal in idle camera image sensors. We present the Distributed Electronic Cosmic-ray Observatory (DECO), a platform for outreach and education as well as for citizen science. Consisting of an app and associated database and web site, DECO harnesses the power of distributed camera image sensors for cosmic-ray detection.

  19. Machine plumbness criteria: Interim technology release

    SciTech Connect (OSTI)

    Not Available

    1987-06-01

    The objective of this technology release is to define the maximum allowable deviation from plumb of the centrifuge machine and to recommend machine installation techniques to achieve the specified criteria. The centrifuge feature used as a reference for plumbness is the casing centerline as defined by a line drawn between the theoretical centers of the top and bottom flange faces. In practice, this measurement is accomplished by using specified casing flange diameters or bolt patterns as the reference points. The criterion adopted for GCEP is that each machine shall be plumb within 0.5 in. over the length of the casing as initially installed. Over a long period of time the plumbness is allowed to degrade to 1.0 in. This standard should be achievable using the currently planned installation techniques and within a time limit consistent with GCEP operational objectives. For development testing, centrifuge machines are meticulously adjusted using a plumb bob to achieve a plumbness with 1/8 in. About one to two days are required to complete the installation. This level of effort is justified for a development machine especially where baseline data is being gathered. A more reasonable standard with a corresponding reduction in installation time is required for GCEP. The specified criteria of 0.5 in. maximum out-of-plumb at time of installation and 1.0 in., ultimate, are believed to be a reasonable compromise. Machine design features or operating modes that are dependent on vertical alignment were examined to assess the impact of the selected plumbness criteria. Machine performance and design requirements are defined in the applicable technology release documents.

  20. Baseline Test Specimen Machining Report

    SciTech Connect (OSTI)

    mark Carroll

    2009-08-01

    The Next Generation Nuclear Plant (NGNP) Project is tasked with selecting a high temperature gas reactor technology that will be capable of generating electricity and supplying large amounts of process heat. The NGNP is presently being designed as a helium-cooled high temperature gas reactor (HTGR) with a large graphite core. The graphite baseline characterization project is conducting the research and development (R&D) activities deemed necessary to fully qualify nuclear-grade graphite for use in the NGNP reactor. Establishing nonirradiated thermomechanical and thermophysical properties by characterizing lot-to-lot and billet-to-billet variations (for probabilistic baseline data needs) through extensive data collection and statistical analysis is one of the major fundamental objectives of the project. The reactor core will be made up of stacks of graphite moderator blocks. In order to gain a more comprehensive understanding of the varying characteristics in a wide range of suitable graphites, any of which can be classified as “nuclear grade,” an experimental program has been initiated to develop an extensive database of the baseline characteristics of numerous candidate graphites. Various factors known to affect the properties of graphite will be investigated, including specimen size, spatial location within a graphite billet, specimen orientation within a billet (either parallel to [P] or transverse to [T] the long axis of the as-produced billet), and billet-to-billet variations within a lot or across different production lots. Because each data point is based on a certain position within a given billet of graphite, particular attention must be paid to the traceability of each specimen and its spatial location and orientation within each billet. The evaluation of these properties is discussed in the Graphite Technology Development Plan (Windes et. al, 2007). One of the key components in the evaluation of these graphite types will be mechanical testing on specimens drawn from carefully controlled sections of each billet. To this end, this report will discuss the machining of the first set of test specimens that will be evaluated in this program through tensile, compressive, and flexural testing. Validation that the test specimens have been produced to the tolerances required by the applicable ASTM standards, and to the quality control levels required by this program, will demonstrate the viability of sending graphite to selected suppliers that will provide valuable and certifiable data to future data sets that are integral to the NGNP program and beyond.

  1. 1/12/14 Micro-Windmills MayOne DayPower Your Smart Phone | Regator -Curated Blog Search and Discovery regator.com/p/262904480/micro-windmills_may_one_day_power_your_smart_phone/ 1/4

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    1/12/14 Micro-Windmills MayOne DayPower Your Smart Phone | Regator - Curated Blog Search the best blogs Browse Trends Monitor Favorites All Academics Arts Business Entertainment Health Hobbies Phone | Regator - Curated Blog Search and Discovery regator.com/p/262904480/micro

  2. 1/12/14 Researchers Develop Micro-Windmills to Recharge Cell Phones www.sciencespacerobots.com/researchers-develop-micro-windmills-to-recharge-cell-phones-11020142 1/2

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    1/12/14 Researchers Develop Micro-Windmills to Recharge Cell Phones www.sciencespacerobots.com/researchers-develop-micro-windmills-to-recharge-cell-phones-11020142 1/2 Permalink | Subscribe | 0 Comments | Tweet 40 36Like Search Researchers Develop Micro-Windmills professor have created a micro- windmill that generates wind energy. The device is just 1.8 mm at its widest

  3. 3/4/2014 Mini Windmills Can Recharge Cell Phones http://www.cemag.us/news/2014/01/mini-windmills-can-recharge-cell-phones#.UxY6ePldWa8 1/9

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    3/4/2014 Mini Windmills Can Recharge Cell Phones http://www.cemag.us/news/2014/01/mini-windmills'S GUIDE LOG IN REGISTERFIND MY COMPANY News Mini Windmills Can Recharge Cell Phones ADVERTISEMENT Mon, 01 research associate and electrical engineering professor have designed a micro-windmill that generates wind

  4. 4/5/2014 Scientists build tinywindmills to power mobile phones -Tech2 http://tech.firstpost.com/news-analysis/scientists-build-ting-windmills-power-mobile-phones-208443.html 1/4

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    4/5/2014 Scientists build tinywindmills to power mobile phones - Tech2 http://tech.firstpost.com/news-analysis/scientists-build-ting-windmills this website NEWS & ANALYSIS REVIEWS MOBILES LAPTOPS COMPARE TECH GURU Scientists build tiny windmills to power mobile phones Micro-windmills to power your mobile devices By NainaKhedekar / 13 Jan 2014 , 17:26 A team

  5. 2/1/2014 TinyMicro-Robotic Windmill Recharges Phone Batteries | The DailyFusion http://dailyfusion.net/2014/01/tiny-micro-windmill-recharges-phone-batteries-25864/ 1/4

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    2/1/2014 TinyMicro-Robotic Windmill Recharges Phone Batteries | The DailyFusion http://dailyfusion.net/2014/01/tiny-micro-windmill-recharges-phone-batteries-25864/ 1/4 Knowledge is Power prev next A UT Arlington research associate and electrical engineering professor have designed a micro-windmill

  6. 4/5/2004 JHU-APL 1 Machine LearningMachine Learning

    E-Print Network [OSTI]

    Chang, Edward Y.

    4/5/2004 JHU-APL 1 Machine LearningMachine Learning forfor Image RetrievalImage Retrieval Edward Chang Associate Professor, Electrical Engineering, UC Santa Barbara CTO, VIMA Technologies #12;4/5/2004 JHU-APL 2 Are They Similar? #12;4/5/2004 JHU-APL 3 Are They Similar? In terms of what? Is Tiger Woods

  7. Energy efficient wireless unicast routing alternatives for machine-to-machine networks

    E-Print Network [OSTI]

    Uysal-Biyikoglu, Elif

    Review Energy efficient wireless unicast routing alternatives for machine-to-machine networks Neyre: Energy-efficient routing Shortest-path routing Energy-efficient networks M2M M2M applications M2M for large- scale networking of devices without dependence on human interaction. Energy efficiency is one

  8. Machine Learning, Machine Vision, and the Brain Tomaso Poggio and Christian R. Shelton

    E-Print Network [OSTI]

    Shelton, Christian R.

    to the study of artificial and biological vision. In the last few years both computer vision -- which attemptsMachine Learning, Machine Vision, and the Brain Tomaso Poggio and Christian R. Shelton Center of intelligence, both biological and artificial. In this paper we review our work over the last ten years

  9. Machine Learning, Machine Vision, and the Brain Tomaso Poggio and Christian R. Shelton

    E-Print Network [OSTI]

    Shelton, Christian R.

    to the study of artificial and biological vision. In the last few years both computer vision ­ which attemptsMachine Learning, Machine Vision, and the Brain Tomaso Poggio and Christian R. Shelton Center of intelligence, both biological and artificial. In this paper we review our work over the last ten years

  10. Evaluating socio-economic state of a country analyzing airtime credit and mobile phone datasets

    E-Print Network [OSTI]

    Gutierrez, Thoralf; Blondel, Vincent D

    2013-01-01

    Reliable statistical information is important to make political decisions on a sound basis and to help measure the impact of policies. Unfortunately, statistics offices in developing countries have scarce resources and statistical censuses are therefore conducted sporadically. Based on mobile phone communications and history of airtime credit purchases, we estimate the relative income of individuals, the diversity and inequality of income, and an indicator for socioeconomic segregation for fine-grained regions of an African country. Our study shows how to use mobile phone datasets as a starting point to understand the socio-economic state of a country, which can be especially useful in countries with few resources to conduct large surveys.

  11. Sales and Use Tax Exemption for Electrical Generating Equipment

    Broader source: Energy.gov [DOE]

    Indiana does not have a specific sales and use tax exemption for equipment used in the production of renewable electricity. Therefore, such equipment is presumed to be subject to sales and use tax....

  12. Anne Arundel County- Solar and Geothermal Equipment Property Tax Credits

    Broader source: Energy.gov [DOE]

    Anne Arundel County offers a one-time credit from county property taxes on residential dwellings that use solar and geothermal energy equipment for heating and cooling, and solar energy equipment...

  13. Difficulty of Measuring Emissions from Heavy-Duty Engines Equipped...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Difficulty of Measuring Emissions from Heavy-Duty Engines Equipped with SCR and DPF Difficulty of Measuring Emissions from Heavy-Duty Engines Equipped with SCR and DPF In reference...

  14. Optimal Deployment of Emissions Reduction Technologies for Construction Equipment

    E-Print Network [OSTI]

    Quadrifoglio, Luca

    Optimal Deployment of Emissions Reduction Technologies for Construction Equipment Muhammad Ehsanul The objective of this research was to develop a multiob- jective optimization model to deploy emissions reduction technologies for nonroad construction equipment to re- duce emissions in a cost

  15. Best Management Practice #12: Laboratory and Medical Equipment

    Broader source: Energy.gov [DOE]

    Equipment used in hospitals and laboratories can use significant amounts of water, offering the opportunity for substantial water savings by making a few small changes to how and when the water is used by the equipment.

  16. Equipment acquisition plans for the SSCL magnet excitation power system

    SciTech Connect (OSTI)

    Winje, R.

    1993-05-01

    This report gives a brief description of the major electrical technical equipment used in the Superconducting Super Collider accelerators systems and the present laboratory plans for the acquisition of the equipment.

  17. Balance-of-System Equipment Required for Renewable Energy Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Balance-of-System Equipment Required for Renewable Energy Systems Balance-of-System Equipment Required for Renewable Energy Systems July 2, 2012 - 8:21pm Addthis Both...

  18. Training Room Equipment Instructions Projector and TV Display

    E-Print Network [OSTI]

    Crawford, T. Daniel

    Training Room Equipment Instructions Projector and TV Display The control panel on the wall are connected to a training room computer and room is equipped with a keyboard, mouse and clicker. Connect USB

  19. Data Network Equipment Energy Use and Savings Potential in Buildings

    E-Print Network [OSTI]

    Lanzisera, Steven

    2010-01-01

    separate router with combined wireless and wired capabilityrouter. The category of “Other Customer Premises Equipment” covers users of satellite, fixed wireless, androuters, firewalls, modems (service provider and customer premises equipment), network security appliances, and wireless

  20. Optimal Sequencing of Central Refrigeration Equipment in an Industrial Plant 

    E-Print Network [OSTI]

    Fiorino, D. P.; Priest, J. W.

    1986-01-01

    A model was developed to find a viable solution to the problem of selecting the optimal sequence of refrigeration equipment (chillers, cooling towers, pumps) to operate in a Central Utility Plant. The optimal equipment sequence is that sequence...

  1. Electrical Equipment Replacement: Energy Efficiency versus System Compatibility 

    E-Print Network [OSTI]

    Massey, G. W.

    2005-01-01

    Electrical equipment components are replaced every day because of failure, obsolescence, or upgrade. Because of technological gains, replacement components are typically more energy efficient than older equipment. Life cycle cost analyses encourage...

  2. Introduction You can access your staff emails via your Android mobile phone. Setup is fast, and will allow you to

    E-Print Network [OSTI]

    Balasuriya, Sanjeeva

    Introduction You can access your staff emails via your Android mobile phone. Setup is fast phone. Please note that due to the nature of Android, these instructions may vary depending 3000 or servicedesk@adelaide.edu.au Technology Services Configure Microsoft Exchange - Android #12;

  3. The National Alliance of Clean Energy Incubators jgroelinger@cleanenergyalliance.com Phone: +1-609-516-7669

    E-Print Network [OSTI]

    Delgado, Mauricio

    The National Alliance of Clean Energy Incubators jgroelinger@cleanenergyalliance.com Phone: +1, Executive Director (phone): 1-609-516-7669; (e-mail): jgroelinger@cleanenergyalliance.com CLEAN ENERGY ALLIANCE AND U.S. DEPARTMENT OF ENERGY LAUNCH PARTNERSHIP TO SUPPORT COMMERCIALIZATION OF CLEAN ENERGY

  4. WalkSafe: A Pedestrian Safety App for Mobile Phone Users Who Walk and Talk While Crossing Roads

    E-Print Network [OSTI]

    Campbell, Andrew T.

    WalkSafe: A Pedestrian Safety App for Mobile Phone Users Who Walk and Talk While Crossing Roads distract users, presenting a significant impact to pedestrian safety; for example, a mobile phone user deep in conversation while crossing a street is generally more at risk than other pedestrians not engaged

  5. Blade Testing Equipment Development and Commercialization: Cooperative Research and Development Final Report, CRADA Number CRD-09-346

    SciTech Connect (OSTI)

    Snowberg, D.; Hughes, S.

    2013-04-01

    Blade testing is required to meet wind turbine design standards, reduce machine cost, and reduce the technical and financial risk of deploying mass-produced wind turbine models. NREL?s National Wind Technology Center (NWTC) in Colorado is the only blade test facility in the U.S. capable of performing full-scale static and fatigue testing of multi-megawatt-scale wind turbine blades. Rapid growth in wind turbine size over the past two decades has outstripped the size capacity of the NWTC blade test facility leaving the U.S. wind industry without a suitable means of testing blades for large land-based and offshore turbines. This CRADA will develop and commercialize testing technologies and test equipment, including scaling up, value engineering, and testing of equipment to be used at blade testing facilities in the U.S. and around the world.

  6. 100 E. Northwestern Avenue, Philadelphia, PA 19118 |Phone 215-247-5777 | Fax 215-247-2192 | www.morrisarboretum.org How to register for Summer Adventure Camp

    E-Print Network [OSTI]

    George, Edward I.

    100 E. Northwestern Avenue, Philadelphia, PA 19118 |Phone 215. Northwestern Avenue Philadelphia, PA 19118 4. Review Parent Summer Camp Handbook. Please go over the Rules; 100 E. Northwestern Avenue, Philadelphia, PA 19118 |Phone 215-247-5777 | Fax 215

  7. BCM 1 Equipment Inventory | Sample Preparation Laboratories

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O DBiomass andAtomsVehicles and FuelsjBBEE Public1 Equipment

  8. BCM 2 Equipment Inventory | Sample Preparation Laboratories

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O DBiomass andAtomsVehicles and FuelsjBBEE Public1 Equipment2

  9. Cruising Equipment Company CECO | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePower VenturesInformation EU-UNDPCross-LaminatedCruising Equipment Company

  10. LANSCE | Lujan Center | Instruments | ASTERIX | Equipment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousand CubicResource and Job Event InLANLRecoveryEquipment Surfaces

  11. Laboratory Equipment & Supplies | Sample Preparation Laboratories

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesse Bergkamp Graduate studentScience (SC) DirectedEquipment & Supplies

  12. Laboratory Equipment Donation Program - Home Page

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesse Bergkamp Graduate studentScience (SC) DirectedEquipment &

  13. INL Equipment to Aid Regional Response Team

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (JournalvivoHighHussein KhalilResearch8 IEEEINL Equipment to Aid Regional

  14. Laboratory Equipment Donation Program - Guidelines/FAQ

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousand CubicResourcelogo and masthead Berkeley LablooksEquipment

  15. Micro-machined thermo-conductivity detector

    DOE Patents [OSTI]

    Yu, Conrad (Antioch, CA)

    2003-01-01

    A micro-machined thermal conductivity detector for a portable gas chromatograph. The detector is highly sensitive and has fast response time to enable detection of the small size gas samples in a portable gas chromatograph which are in the order of nanoliters. The high sensitivity and fast response time are achieved through micro-machined devices composed of a nickel wire, for example, on a silicon nitride window formed in a silicon member and about a millimeter square in size. In addition to operating as a thermal conductivity detector, the silicon nitride window with a micro-machined wire therein of the device can be utilized for a fast response heater for PCR applications.

  16. Automatic feed system for ultrasonic machining

    DOE Patents [OSTI]

    Calkins, Noel C. (Los Alamos, NM)

    1994-01-01

    Method and apparatus for ultrasonic machining in which feeding of a tool assembly holding a machining tool toward a workpiece is accomplished automatically. In ultrasonic machining, a tool located just above a workpiece and vibrating in a vertical direction imparts vertical movement to particles of abrasive material which then remove material from the workpiece. The tool does not contact the workpiece. Apparatus for moving the tool assembly vertically is provided such that it operates with a relatively small amount of friction. Adjustable counterbalance means is provided which allows the tool to be immobilized in its vertical travel. A downward force, termed overbalance force, is applied to the tool assembly. The overbalance force causes the tool to move toward the workpiece as material is removed from the workpiece.

  17. Multi-winding homopolar electric machine

    DOE Patents [OSTI]

    Van Neste, Charles W

    2012-10-16

    A multi-winding homopolar electric machine and method for converting between mechanical energy and electrical energy. The electric machine includes a shaft defining an axis of rotation, first and second magnets, a shielding portion, and a conductor. First and second magnets are coaxial with the shaft and include a charged pole surface and an oppositely charged pole surface, the charged pole surfaces facing one another to form a repulsive field therebetween. The shield portion extends between the magnets to confine at least a portion of the repulsive field to between the first and second magnets. The conductor extends between first and second end contacts and is toroidally coiled about the first and second magnets and the shield portion to develop a voltage across the first and second end contacts in response to rotation of the electric machine about the axis of rotation.

  18. Diagnostics for machine protection of DEMO

    SciTech Connect (OSTI)

    Felton, R.

    2014-08-21

    DEMO aims to (i) integrate, demonstrate and validate all relevant technology necessary to convert fusion energy to electrical energy and (ii) that the machine and its operations are economically and environmentally acceptable. To maintain the efficiency and availability of the machine, there are several physics and combined physics/technology issues as well as the engineering issues. Machine Protection (also known as Protection of Investment) addresses both the risks to plant (to avoid costly repair or replacement) and the risks to normal operating time (to avoid loss of productivity and the return on investment). The plasma-related Machine Protection issues involve measurement and control of plasma stability, plasma purity, and plasma-wall interactions. Machine Protection aims to avoid hitting catastrophic limits by using early warning alarm systems, and controlled termination or avoidance, involving coordinated actions of the magnets, gas and auxiliary heating or current-drive systems. This article outlines the key processes, some of which are used in present-day tokamaks and some of which are new specifically for DEMO (e.g. First wall and divertor power handling) and reveals the need to research and develop new science and technology for Machine Protections in DEMO's high radiation and thermal fields. This work was funded by the RCUK Energy Programme under grant EP/I501045 and the European Communities under the contract of Association between EURATOM and CCFE and conducted partly under EFDA PPPT (WP13-DAS04). The views and opinions expressed herein do not necessarily reflect those of the European Commission.

  19. Efficient dynamic synchronous machine simulation with harmonics

    SciTech Connect (OSTI)

    Haskew, T.A.; Stern, H.P.; Chen, Z. [Univ. of Alabama, Tuscaloosa, AL (United States). Dept. of Electrical Engineering] [Univ. of Alabama, Tuscaloosa, AL (United States). Dept. of Electrical Engineering

    1996-06-01

    Within this paper, an efficient procedure for the dynamic simulation of faulted synchronous machines operating in the presence of harmonics is presented. The algorithm employs steady-state frequency domain techniques for simulation of the transmission system sequence networks and time domain methods for the synchronous machines represented in the odq frame of reference. The procedure affords greater accuracy than conventional fault analysis techniques based strictly on steady-state methods, yet requires far less computational time than full system dynamic simulations such as those using the EMTP.

  20. Method for machining steel with diamond tools

    DOE Patents [OSTI]

    Casstevens, J.M.

    1984-01-01

    The present invention is directed to a method for machine optical quality finishes and contour accuracies of workpieces of carbon-containing metals such as steel with diamond tooling. The wear rate of the diamond tooling is significantly reduced by saturating the atmosphere at the interface of the workpiece and the diamond tool with a gaseous hydrocarbon during the machining operation. The presence of the gaseous hydrocarbon effectively eliminates the deterioration of the diamond tool by inhibiting or preventing the conversion of the diamond carbon to graphite carbon at the point of contact between the cutting tool and the workpiece.

  1. High slot utilization systems for electric machines

    DOE Patents [OSTI]

    Hsu, John S (Oak Ridge, TN)

    2009-06-23

    Two new High Slot Utilization (HSU) Systems for electric machines enable the use of form wound coils that have the highest fill factor and the best use of magnetic materials. The epoxy/resin/curing treatment ensures the mechanical strength of the assembly of teeth, core, and coils. In addition, the first HSU system allows the coil layers to be moved inside the slots for the assembly purpose. The second system uses the slided-in teeth instead of the plugged-in teeth. The power density of the electric machine that uses either system can reach its highest limit.

  2. Apparatus for cooling an electric machine

    SciTech Connect (OSTI)

    Palafox, Pepe; Gerstler, William Dwight; Shen, Xiaochun; El-Refaie, Ayman Mohamed Fawzi; Lokhandwalla, Murtuza; Salasoo, Lembit

    2013-07-16

    Provided is an apparatus, for example, for use with a rotating electric machine, that includes a housing. The housing can include a housing main portion and a housing end portion. The housing main portion can be configured to be disposed proximal to a body portion of a stator section of an electric machine. The housing main portion can define a main fluid channel that is configured to conduct fluid therethrough. The housing end portion can receive fluid from said main fluid channel and direct fluid into contact with a winding end portion of a conductive winding of the stator section.

  3. 20130416_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Vanderhoff, Alex

    2013-04-24

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 4/16/13.

  4. Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Vanderhoff, Alex

    2013-07-15

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 6/1/13 to 6/30/13

  5. 20140430_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Thibedeau, Joe

    2014-05-05

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 April to 30 April 2014.

  6. Green Machine Florida Canyon Hourly Data 20130731

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Vanderhoff, Alex

    2013-08-30

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 7/1/13 to 7/31/13.

  7. Methods and apparatus for controlling rotary machines

    DOE Patents [OSTI]

    Bagepalli, Bharat Sampathkumaran (Niskayuna, NY); Jansen, Patrick Lee (Scotia, NY); Barnes, Gary R. (Delanson, NY); Fric, Thomas Frank (Greer, SC); Lyons, James Patrick Francis (Niskayuna, NY); Pierce, Kirk Gee (Simpsonville, SC); Holley, William Edwin (Greer, SC); Barbu, Corneliu (Guilderland, NY)

    2009-09-01

    A control system for a rotary machine is provided. The rotary machine has at least one rotating member and at least one substantially stationary member positioned such that a clearance gap is defined between a portion of the rotating member and a portion of the substantially stationary member. The control system includes at least one clearance gap dimension measurement apparatus and at least one clearance gap adjustment assembly. The adjustment assembly is coupled in electronic data communication with the measurement apparatus. The control system is configured to process a clearance gap dimension signal and modulate the clearance gap dimension.

  8. Quantum thermal machines with single nonequilibrium environments

    E-Print Network [OSTI]

    Bruno Leggio; Bruno Bellomo; Mauro Antezza

    2015-01-08

    We propose a scheme for a quantum thermal machine made by atoms interacting with a single non-equilibrium electromagnetic field. The field is produced by a simple configuration of macroscopic objects held at thermal equilibrium at different temperatures. We show that these machines can deliver all thermodynamic tasks (cooling, heating and population inversion), and this by establishing quantum coherence with the body on which they act. Remarkably, this system allows to reach efficiencies at maximum power very close to the Carnot limit, much more than in existing models. Our findings offer a new paradigm for efficient quantum energy flux management, and can be relevant for both experimental and technological purposes.

  9. Method for machining steel with diamond tools

    DOE Patents [OSTI]

    Casstevens, John M. (Greenville, TX)

    1986-01-01

    The present invention is directed to a method for machining optical quality inishes and contour accuracies of workpieces of carbon-containing metals such as steel with diamond tooling. The wear rate of the diamond tooling is significantly reduced by saturating the atmosphere at the interface of the workpiece and the diamond tool with a gaseous hydrocarbon during the machining operation. The presence of the gaseous hydrocarbon effectively eliminates the deterioration of the diamond tool by inhibiting or preventing the conversion of the diamond carbon to graphite carbon at the point of contact between the cutting tool and the workpiece.

  10. Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Vanderhoff, Alex

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 6/1/13 to 6/30/13

  11. Green Machine Florida Canyon Hourly Data 20130731

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Vanderhoff, Alex

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 7/1/13 to 7/31/13.

  12. 20130416_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Vanderhoff, Alex

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 4/16/13.

  13. 20140430_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Thibedeau, Joe

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 April to 30 April 2014.

  14. Electric machine and current source inverter drive system

    DOE Patents [OSTI]

    Hsu, John S

    2014-06-24

    A drive system includes an electric machine and a current source inverter (CSI). This integration of an electric machine and an inverter uses the machine's field excitation coil for not only flux generation in the machine but also for the CSI inductor. This integration of the two technologies, namely the U machine motor and the CSI, opens a new chapter for the component function integration instead of the traditional integration by simply placing separate machine and inverter components in the same housing. Elimination of the CSI inductor adds to the CSI volumetric reduction of the capacitors and the elimination of PMs for the motor further improve the drive system cost, weight, and volume.

  15. Mixed Oxide Fresh Fuel Package Auxiliary Equipment

    SciTech Connect (OSTI)

    Yapuncich, F.; Ross, A. [AREVA Federal Services (AFS), Tacoma WA (United States); Clark, R.H. [Shaw AREVA MOX Services, Savannah River Site, Aiken, SC (United States); Ammerman, D. [Sandia National Laboratories, Albuquerque, NM (United States)

    2008-07-01

    The United States Department of Energy's National Nuclear Security Administration (NNSA) is overseeing the construction the Mixed Oxide (MOX) Fuel Fabrication Facility (MFFF) on the Savannah River Site. The new facility, being constructed by NNSA's contractor Shaw AREVA MOX Services, will fabricate fuel assemblies utilizing surplus plutonium as feedstock. The fuel will be used in designated commercial nuclear reactors. The MOX Fresh Fuel Package (MFFP), which has recently been licensed by the Nuclear Regulatory Commission (NRC) as a type B package (USA/9295/B(U)F-96), will be utilized to transport the fabricated fuel assemblies from the MFFF to the nuclear reactors. It was necessary to develop auxiliary equipment that would be able to efficiently handle the high precision fuel assemblies. Also, the physical constraints of the MFFF and the nuclear power plants require that the equipment be capable of loading and unloading the fuel assemblies both vertically and horizontally. The ability to reconfigure the load/unload evolution builds in a large degree of flexibility for the MFFP for the handling of many types of both fuel and non fuel payloads. The design and analysis met various technical specifications including dynamic and static seismic criteria. The fabrication was completed by three major fabrication facilities within the United States. The testing was conducted by Sandia National Laboratories. The unique design specifications and successful testing sequences will be discussed. (authors)

  16. BIODIESEL BLENDS IN SPACE HEATING EQUIPMENT.

    SciTech Connect (OSTI)

    KRISHNA,C.R.

    2001-12-01

    Biodiesel is a diesel-like fuel that is derived from processing vegetable oils from various sources, such as soy oil, rapeseed or canola oil, and also waste vegetable oils resulting from cooking use. Brookhaven National laboratory initiated an evaluation of the performance of blends of biodiesel and home heating oil in space heating applications under the sponsorship of the Department of Energy (DOE) through the National Renewable Energy Laboratory (NREL). This report is a result of this work performed in the laboratory. A number of blends of varying amounts of a biodiesel in home heating fuel were tested in both a residential heating system and a commercial size boiler. The results demonstrate that blends of biodiesel and heating oil can be used with few or no modifications to the equipment or operating practices in space heating. The results also showed that there were environmental benefits from the biodiesel addition in terms of reductions in smoke and in Nitrogen Oxides (NOx). The latter result was particularly surprising and of course welcome, in view of the previous results in diesel engines where no changes had been seen. Residential size combustion equipment is presently not subject to NOx regulation. If reductions in NOx similar to those observed here hold up in larger size (commercial and industrial) boilers, a significant increase in the use of biodiesel-like fuel blends could become possible.

  17. Smart phone apps for self-monitoring diabetes. Intelligent home designs for people suffering from Alzheimer's. Mobile ehealth records and drug

    E-Print Network [OSTI]

    Smart phone apps for self-monitoring diabetes. Intelligent home designs for people suffering from ­ to be uploaded through mobile technologies such as a smart phone.The statistical information can then be accessed gathered through home monitoring systems keep chronic care patients out of the hospitals. Smart phone apps

  18. 2/1/2014 Financial Press -Breaking Business & Economic News http://financialpress.com/2014/01/21/teeny-tiny-windmills-could-recharge-phones/ 1/6

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    /01/21/teeny-tiny-windmills-could-recharge-phones/ 1/6 Teeny tiny windmills could recharge phones Home » Green Tech » Teeny tiny windmills could recharge phones One of the tiny windmills. (Credit: University of Texas, Arlington) A microscopic windmill could one day provide a portable method of charging devices

  19. A machine learning approach to automated structural network analysis: Application to neonatal encephalopathy

    E-Print Network [OSTI]

    Ziv, E; Tymofiyeva, O; Ferriero, DM; Barkovich, AJ; Hess, CP; Xu, D

    2013-01-01

    International Conference on Machine Learning. VishwanathanGraph Kernels. Journal of Machine Learning Research 11:to support vector machines: and other kernel-based learning

  20. A machine learning framework for classifying invulnerabilites [sic] and predicting exploitability

    E-Print Network [OSTI]

    Bozorgi, Mehran

    2009-01-01

    Flow . . . 15 Chapter 4 Using Machine Learning for Classi?cation . . . 4.1 Supervised Machine Learning Approach . .with Kernels: Support Vector Machines, Regularization,

  1. Machine Assistance in Collection Building: New Tools, Research, Issues and Reflections

    E-Print Network [OSTI]

    Mitchell, Steve

    2006-01-01

    www.jaist.ac.jp/~tajima/ Machine assistance in collectionInternational Conference on Machine Learning (2004), http://International Conference on Machine Learning (Menlo Park

  2. Environmental Analysis of Milling Machine Tool Use in Various Manufacturing Environments

    E-Print Network [OSTI]

    Diaz, Nancy; Helu, Moneer; Jayanathan, Stephen; Chen, Yifen; Horvath, Arpad; Dornfeld, David

    2010-01-01

    Environmental Analysis of Milling Machine Tool Use ina standard vertical milling machine tool. In this example,classification is milling machine tools. M I. I NTRODUCTION

  3. Impact of the manufacturing phase on the life cycle of machined products

    E-Print Network [OSTI]

    Diaz, Nancy; Helu, Moneer; Ninomiya, Kevin; Dornfeld, David

    2012-01-01

    2010, Environmental Analysis of Milling Machine Tool Use inReduction Strategies for Milling Machine Tool Use. Proc ofconsumption of a milling machine tool for the production of

  4. Energy Consumption Characterization and Reduction Strategies for Milling Machine Tool Use

    E-Print Network [OSTI]

    Diaz, Nancy; E. Redelsheimer; Dornfeld, David

    2011-01-01

    2010): Environmental Analysis of Milling Machine Tool Use inand Reduction Strategies for Milling Machine Tool Use Nancythe energy consumption of milling machine tools during their

  5. Deep Shot: A Framework for Migrating Tasks Across Devices Using Mobile Phone Cameras

    E-Print Network [OSTI]

    Cortes, Corinna

    Deep Shot: A Framework for Migrating Tasks Across Devices Using Mobile Phone Cameras Tsung migrate their tasks across devices. To address this problem, we created Deep Shot, a framework) and resuming it on a different device. In particular, Deep Shot supports two novel and intuitive interaction

  6. Examining Mobile Phone Text Legibility while Walking Terhi Mustonen, Maria Olkkonen, and Jukka Hkkinen

    E-Print Network [OSTI]

    Olkkonen, Maria

    conditions. Visual performance and subjective evaluation of task difficulty were used as measures of text and with different tasks will be lost. Categories & Subject Descriptors: H.5.2. [User Interfaces]: Ergonomics, Evaluation/ methodology. General Terms: Human Factors. Keywords: Legibility, mobile phones, walking, pseudo

  7. Using NFC Phones for Proving Credentials Gergely Alpr1,2

    E-Print Network [OSTI]

    Verdult, Roel

    , users need only their NFC-enabled mo- bile phones and credentials implemented on their smart cards. An NFC device acts like a bridge between service providers and secure elements and the secure credentials of anonymous creden- tials, implemented on a smart card to provide the functionality with minimal data

  8. METIS: Exploring mobile phone sensing offloading for efficiently supporting social sensing applications

    E-Print Network [OSTI]

    Mascolo, Cecilia

    buildings are instrumented with a variety of sensors, such as RFID access control systems, Passive Infrared on the phone's battery. In this paper, we present the design, implementation, and evaluation of METIS implements a novel sensor task distribution scheme that dynamically decides whether to perform sensing

  9. Oklahoma State University-Tulsa Academic Advising Syllabus Advising Center Phone: 918-594-8271

    E-Print Network [OSTI]

    Veiga, Pedro Manuel Barbosa

    Oklahoma State University-Tulsa Academic Advising Syllabus Advising Center Phone: 918-594-8271 130 North Hall Fax: 918-594-8246 700 N. Greenwood Ave. Hours: M-R, 8 am to 6 pm, F 8 am to 5 pm Tulsa, OK at OSU-Tulsa. OSU-TULSA ACADEMIC ADVISING MISSION STATEMENT The core values of Oklahoma State University-Tulsa

  10. Using Mobile Phones for Promoting Water Conservation Rahuvaran Pathmanathan1, 2

    E-Print Network [OSTI]

    Pearce, Jon

    243 Using Mobile Phones for Promoting Water Conservation Rahuvaran Pathmanathan1, 2 , Jon Pearce2@unimelb.edu.au ABSTRACT We report a design investigation that seeks to help people to conserve water in their homes through the use of mobile technology. To persuade people to use water more wisely, one approach is to give

  11. Quantifying the Effectiveness of Mobile Phone Virus Response Mechanisms Elizabeth Van Ruitenbeek,

    E-Print Network [OSTI]

    Sanders, William H.

    @orange-ftgroup.com Abstract Viruses that infect smartphones are emerging as a new front in the fight against computer viruses the effectiveness of mobile phone virus response mech- anisms. 1. Introduction The enhanced computational measures can leverage existing antivirus efforts against traditional computer viruses

  12. Home -Yahoo! -My Yahoo! -News Alerts -Help FREE Web-enabled Cell Phone

    E-Print Network [OSTI]

    Savrasov, Sergej Y.

    Home - Yahoo! - My Yahoo! - News Alerts - Help FREE Web-enabled Cell Phone Home Top Stories of Energy (news - web sites) supercomputer and a grid of 80 computer processors to predict the volume radioactivity over that period. Traces of plutonium in depleted uranium (DU) weapons used by NATO (news - web

  13. NATURAL GAS ADVISORY COMMITTEE 2013-2015 Name Affiliation Phone E-mail Sector

    E-Print Network [OSTI]

    NATURAL GAS ADVISORY COMMITTEE 2013-2015 Name Affiliation Phone E-mail Sector Cocks, Michael BPA Natural Gas (503) 721-2475 randy.friedman@nwnatural.com Distribution Finklea Edward NW Ind. Gas Users (503@ci.tacoma.wa.us Electric Utility Defenbach, Byron Intermountain Gas (208) 377-6080 bdefen@intgas.com Distribution Dahlberg

  14. Virtual Hooping: teaching a phone about hula-hooping for Fitness, Fun and Rehabilitation

    E-Print Network [OSTI]

    Murray-Smith, Roderick

    Virtual Hooping: teaching a phone about hula-hooping for Fitness, Fun and Rehabilitation Josip Musi for fitness and rehabilitation purposes by training them to recognise a user's hula-hooping movements. It also the creation of hula- hooping performance metrics which can be used in wellness, rehabilitation

  15. NATURAL GAS ADVISORY COMMITTEE 2013-2015 Name Affiliation Phone E-mail Sector June 7

    E-Print Network [OSTI]

    NATURAL GAS ADVISORY COMMITTEE 2013-2015 Name Affiliation Phone E-mail Sector June 7 meeting Cocks Friedman, Randy NW Natural Gas (503) 721-2475 randy.friedman@nwnatural.com Distribution Finklea Edward NW-8553 bdickens@ci.tacoma.wa.us Electric Utility Defenbach, Byron Intermountain Gas (208) 377-6080 bdefen

  16. Dianne Prost O'Leary Computer Science Department Phone: (301) 405-2678

    E-Print Network [OSTI]

    O'Leary, Dianne P.

    Dianne Prost O'Leary Professor Computer Science Department Phone: (301) 405-2678 and Institute Programmer at a university computing center Summer, 1971 April 24, 2014 1 D. P. O'Leary #12;II. Research are organized by field at http://www.cs.umd.edu/users/oleary/res12/. Books Authored [B2] Dianne P. O'Leary

  17. An Exploratory Study on the Use of Camera Phones and Pico Projectors in Rural India

    E-Print Network [OSTI]

    Toronto, University of

    An Exploratory Study on the Use of Camera Phones and Pico Projectors in Rural India Akhil Mathur* , Divya Ramachandran# , Edward Cutrell , Ravin Balakrishnan * Alcatel-Lucent Bell Labs, Bangalore, India, USA Microsoft Research, Bangalore, India akhil@dgp.toronto.edu, ravin@dgp.toronto.edu ABSTRACT We

  18. Let me catch this! Experiencing Interactive 3D Cinema through Collecting Content with a Mobile Phone

    E-Print Network [OSTI]

    Let me catch this! Experiencing Interactive 3D Cinema through Collecting Content with a Mobile explore how to enable interaction with content in the context of 3D cinemas by means of a mobile phone interested in the user ex- perience of the interactive 3D cinema concept, and how dif- ferent interactive

  19. c 2007 by Elizabeth A. Van Ruitenbeek. All rights reserved. MODELING MOBILE PHONE VIRUS PROPAGATION

    E-Print Network [OSTI]

    Sanders, William H.

    c 2007 by Elizabeth A. Van Ruitenbeek. All rights reserved. #12;MODELING MOBILE PHONE VIRUS of Illinois at Urbana-Champaign, 2007 Urbana, Illinois #12;ABSTRACT Viruses that infect smartphones are emerging as a new research area in the fight against com- puter viruses. This thesis presents two models

  20. KEYBOARD MAPPING AND FONT RENDERING TECHNIQUES FOR NON-LATIN LANGUAGES CASE OF ANDROID MOBILE PHONES

    E-Print Network [OSTI]

    Kassegne, Samuel Kinde

    KEYBOARD MAPPING AND FONT RENDERING TECHNIQUES FOR NON-LATIN LANGUAGES CASE OF ANDROID MOBILE Rendering Techniques for Non-Latin Languages Case of Android Mobile Phones by Dhruv Bhasin Master of Science Devanagari script and writing system, no input method solution has existed so far in Android Mobiles

  1. Introduction This guide will assist you in connecting your Android phone to the University Wireless.

    E-Print Network [OSTI]

    Balasuriya, Sanjeeva

    Introduction This guide will assist you in connecting your Android phone to the University Wireless of the Android OS, these instructions may vary slightly for other branded Android devices. 1. After unlocking or servicedesk@adelaide.edu.au Technology Services Connecting Wireless Android #12;

  2. Dr. Weining Man Department of Physics and Astronomy Phone: (415) 338-2731 (office)

    E-Print Network [OSTI]

    AFFILIATIONS AND ACTIVITIES: Member: American Physical Society (APS) American Chemistry Society (ACS) Referee1 Dr. Weining Man Department of Physics and Astronomy Phone: (415) 338-2731 (office) San Francisco@sfsu.edu -------------------------------------------------------------------------------------------------------------------------- EDUCATION AND EXPERIENCE: Ph.D. Physics Princeton University 2005 M.S. Quantum optics Jilin University 2000

  3. VTrack: Accurate, Energy-Aware Road Traffic Delay Estimation Using Mobile Phones

    E-Print Network [OSTI]

    the bat- tery quickly. In these cases, VTrack can use alternative, less energy-hungry but noisier sensorsVTrack: Accurate, Energy-Aware Road Traffic Delay Estimation Using Mobile Phones Arvind Thiagarajan for travel time estimation using this sensor data that addresses two key challenges: energy consumption

  4. Application-Centric Wi-Fi Energy Management on Smart Phone

    E-Print Network [OSTI]

    Boutaba, Raouf

    Application-Centric Wi-Fi Energy Management on Smart Phone Jian Li Computer Science and Engineering-Fi energy consumption, and propose three energy management schemes: 1) Dynamic control of Wi-Fi on and solution prototyping, we show the effectiveness of device side Wi-Fi energy management and the importance

  5. Department COAP Chairs in PSOM Departments Department COAP Chair Phone Email

    E-Print Network [OSTI]

    Sharp, Kim

    Department COAP Chairs in PSOM Departments Department COAP Chair Phone Email Anesthesia@exchange.upenn.edu Cell & Developmental Biology Stephen DiNardo, PhD 898-1367 sdinardo@mail.med.upenn.edu Dermatology John-8014 cjd@mail.med.upenn.edu Psychiatry Karl Rickels, MD 746-6417 krickels@mail.med.upenn.edu Radiation

  6. MSU TESTING SERVICES 243 Reid Hall / Phone: (406) 994-6984

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    MSU TESTING SERVICES 243 Reid Hall / Phone: (406) 994-6984 Email: exams@montana.edu Student Name: Instructor: ALLOWED DURING TESTING Scratch Paper Computer Additional Information: Exam will be delivered to Testing Services: Exam returned to instructor: Instructor or authorized person will pick up Student

  7. Participatory Sensing in Commerce: Using Mobile Camera Phones to Track Market Price Dispersion

    E-Print Network [OSTI]

    Bulusu, Nirupama

    Participatory Sensing in Commerce: Using Mobile Camera Phones to Track Market Price Dispersion In economics, price dispersion refers to the price difference of a homogeneous good across different vendors. According to [1] "The empirical evidence suggests that price dispersion in both online and offline markets

  8. Drop the Phone and Talk to the Physical World: Programming the Internet of Things with Erlang

    E-Print Network [OSTI]

    Cugola, Gianpaolo

    Drop the Phone and Talk to the Physical World: Programming the Internet of Things with Erlang. Keywords-distributed systems, Internet of Things, program- ming languages, frameworks I. INTRODUCTION The vision of an "Internet of Things" (IoT)--an en- semble of heterogeneous devices embedded within

  9. Emergency sacrificial sealing method in filters, equipment, or systems

    DOE Patents [OSTI]

    Brown, Erik P

    2014-09-30

    A system seals a filter or equipment component to a base and will continue to seal the filter or equipment component to the base in the event of hot air or fire. The system includes a first sealing material between the filter or equipment component and the base; and a second sealing material between the filter or equipment component and the base and proximate the first sealing material. The first sealing material and the second seal material are positioned relative to each other and relative to the filter or equipment component and the base to seal the filter or equipment component to the base and upon the event of fire the second sealing material will be activated and expand to continue to seal the filter or equipment component to the base in the event of hot air or fire.

  10. Effects of Cell Phone Radiofrequency Signal Exposure on Brain Glucos Metabolism

    SciTech Connect (OSTI)

    Volkow, N.D.; Wang, G.; Volkow, N.D.; Tomasi, D.; Wang, G.-J.; Vaska, P.; Fowler, J.S.; Telang, F.; Alexoff, D.; Logan, J.; Wong, C.

    2011-03-01

    The dramatic increase in use of cellular telephones has generated concern about possible negative effects of radiofrequency signals delivered to the brain. However, whether acute cell phone exposure affects the human brain is unclear. To evaluate if acute cell phone exposure affects brain glucose metabolism, a marker of brain activity. Randomized crossover study conducted between January 1 and December 31, 2009, at a single US laboratory among 47 healthy participants recruited from the community. Cell phones were placed on the left and right ears and positron emission tomography with ({sup 18}F)fluorodeoxyglucose injection was used to measure brain glucose metabolism twice, once with the right cell phone activated (sound muted) for 50 minutes ('on' condition) and once with both cell phones deactivated ('off' condition). Statistical parametric mapping was used to compare metabolism between on and off conditions using paired t tests, and Pearson linear correlations were used to verify the association of metabolism and estimated amplitude of radiofrequency-modulated electromagnetic waves emitted by the cell phone. Clusters with at least 1000 voxels (volume >8 cm{sup 3}) and P < .05 (corrected for multiple comparisons) were considered significant. Brain glucose metabolism computed as absolute metabolism ({micro}mol/100 g per minute) and as normalized metabolism (region/whole brain). Whole-brain metabolism did not differ between on and off conditions. In contrast, metabolism in the region closest to the antenna (orbitofrontal cortex and temporal pole) was significantly higher for on than off conditions (35.7 vs 33.3 {micro}mol/100 g per minute; mean difference, 2.4 [95% confidence interval, 0.67-4.2]; P = .004). The increases were significantly correlated with the estimated electromagnetic field amplitudes both for absolute metabolism (R = 0.95, P < .001) and normalized metabolism (R = 0.89; P < .001). In healthy participants and compared with no exposure, 50-minute cell phone exposure was associated with increased brain glucose metabolism in the region closest to the antenna. This finding is of unknown clinical significance.

  11. Iron loss calculation for synchronous reluctance machines

    SciTech Connect (OSTI)

    Leonardi, F.; Matsuo, T.; Lipo, T.A. [Univ. of Wisconsin, Madison, WI (United States)

    1995-12-31

    A numerical method for iron loss calculation is presented in this paper. The method is suitable for any synchronous and most dc machines, especially if the current waveforms are known a priori . This technique will be principally useful for high speed machines and in particular for the synchronous reluctance machines and in particular for the synchronous reluctance machine, where the iron losses are often an important issue. The calculation is based on Finite Element Analysis, which provides the flux density waveforms in the iron, and on the Fourier Analysis of these waveforms. Several Finite Element Simulations are necessary to obtain the induced voltage versus time waveforms. To reduce the post-processing time the majority of the elements of the model are grouped together to create super elements. Also the periodicity of the motor can be used to reduce the number of required simulations. The method is applied to the calculation of the iron losses of a synchronous reluctance generator, and a number of interesting results are discussed in the paper.

  12. A Formulation for Minimax Probability Machine Regression

    E-Print Network [OSTI]

    Grudic, Greg

    A Formulation for Minimax Probability Machine Regression Thomas Strohmann Department of Computer Science University of Colorado, Boulder grudic@cs.colorado.edu Abstract We formulate the regression of the regression model will be within some ± bound of the true regression function. Our formulation is unique

  13. Supercomputer Assisted Generation of Machine Learning Agents

    E-Print Network [OSTI]

    Wang, Xiaorui "Ray"

    is the Defining Challenge of Our Time · Buildings in China ­ 60% of urban building floor space in 2030 has yetSupercomputer Assisted Generation of Machine Learning Agents for the Calibration of Building Energy of Tennessee, Knoxville #12;2 Managed by UT-Battelle for the U.S. Department of Energy Sustainability

  14. Foundations and Trends R Machine Learning

    E-Print Network [OSTI]

    Bengio, Yoshua

    Networks 43 4.6 Auto-Encoders 45 #12;5 Energy-Based Models and Boltzmann Machines 48 5.1 Energy.1561/2200000006 Learning Deep Architectures for AI Yoshua Bengio Dept. IRO, Universit´e de Montr´eal, C.P. 6128, Montreal

  15. Danti with Nuclear Magnetic Resonance Machine 

    E-Print Network [OSTI]

    Unknown

    2011-08-17

    Detailed field measurements of energy consumption (kWh) and demand (kW) are conducted on two injection molding machines (IMMs) used in a typical plastic manufacturing facility in the San Francisco Bay Area, with/without Variable Frequency Drives...

  16. Synchronous Machines 1.0 Introduction

    E-Print Network [OSTI]

    McCalley, James D.

    1 Synchronous Machines 1.0 Introduction One might easily argue that the synchronous generator is the most important component in the power system, since synchronous generators · Are the source of 99 the remainder of the course studying this component. EE 303 contains a chapter on synchronous generators (Module

  17. The Nonnegative Boltzmann Machine Oliver B. Downs

    E-Print Network [OSTI]

    MacKay, David J.C.

    The Nonnegative Boltzmann Machine Oliver B. Downs Hopfield Group Schultz Building Princeton as on a generative model for images of human faces. Introduction The multivariate Gaussian is the most elementary NNBM distribution. The energy function ¡¢¡ for this distribution contains a saddle point and two

  18. The Nonnegative Boltzmann Machine Oliver B. Downs

    E-Print Network [OSTI]

    MacKay, David J.C.

    The Nonnegative Boltzmann Machine Oliver B. Downs Hopfield Group Schultz Building Princeton as on a generative model for images of human faces. Introduction The multivariate Gaussian is the most elementary dimensional competi­ tive NNBM distribution. The energy function E(x) for this distribution contains a saddle

  19. Covered Product Category: Refrigerated Beverage Vending Machines

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including refrigerated beverage vending machines, which are covered by the ENERGY STAR® program. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  20. Designing Fusion Machines for High Availability

    E-Print Network [OSTI]

    Designing Fusion Machines for High Availability Tom Brown, Hutch Neilson Princeton Plasma Physics is proportional to (Availability)-1 Rapid removal/replacement of limited-life in-vessel components is a necessary condition for high availability. DEMO will need to show that a fusion plant can operate with high

  1. CSP Theorems for Communicating B Machines

    E-Print Network [OSTI]

    Doran, Simon J.

    CSP Theorems for Communicating B Machines Steve Schneider and Helen Treharne Technical Report CSD #12;#12;Introduction 1 Abstract. Recent work on combining CSP and B has provided ways of describing sys- tems comprised of components described in both B (to express requirements on state) and CSP (to

  2. Factored Language Models for Statistical Machine Translation

    E-Print Network [OSTI]

    Koehn, Philipp

    Factored Language Models for Statistical Machine Translation Amittai E. Axelrod TH E U N I V E R . . . . . . . . . . . . . . . . . . . . . 10 2.4.3 Log-Linear, Phrase-Based Translation Models . . . . . . . . . 11 3 Statistical Language S ITY OF E D I N B U R G H Master of Science by Research Institute for Communicating and Collaborative

  3. Design of a frozen fruit smoothie machine

    E-Print Network [OSTI]

    Toussaint, Teddy A. (Teddy Antoine)

    2013-01-01

    A smoothie machine known as the FruziFridge is being deterministically designed to dispense frozen fruit smoothies. The design is scalable so it can be made available in homes as a built-in module of a refrigerator or in ...

  4. Class A nal surface nish through machining,

    E-Print Network [OSTI]

    for rapid development and evaluation. The printed car incorporates"plug and play"components such as new the deployment of new vehicles and efficient transportation systems powered by domestic, renewable, clean energy components, hours to machine, and cost 8 4 ~$250 6 concept to drivable car in weeks parts printed in hours

  5. The ATLAS Higgs Machine Learning Challenge

    E-Print Network [OSTI]

    Cowan, Glen; The ATLAS collaboration; Bourdarios, Claire

    2015-01-01

    High Energy Physics has been using Machine Learning techniques (commonly known as Multivariate Analysis) since the 1990s with Artificial Neural Net and more recently with Boosted Decision Trees, Random Forest etc. Meanwhile, Machine Learning has become a full blown field of computer science. With the emergence of Big Data, data scientists are developing new Machine Learning algorithms to extract meaning from large heterogeneous data. HEP has exciting and difficult problems like the extraction of the Higgs boson signal, and at the same time data scientists have advanced algorithms: the goal of the HiggsML project was to bring the two together by a “challenge”: participants from all over the world and any scientific background could compete online to obtain the best Higgs to tau tau signal significance on a set of ATLAS fully simulated Monte Carlo signal and background. Instead of HEP physicists browsing through machine learning papers and trying to infer which new algorithms might be useful for HEP, then c...

  6. Synchronous Machine Modeling Notes2 1.0 Inductances

    E-Print Network [OSTI]

    McCalley, James D.

    Synchronous Machine Modeling ­ Notes2 1.0 Inductances Recall the relation between flux linkages. Rather, for each coil and coil pair in the synchronous machine, we are going to see if any of the terms

  7. Virtual cutter path display for dental milling machine

    E-Print Network [OSTI]

    Ito, Teruaki

    This paper presents the prototype of a mixed reality system using the computer controlled dental milling machine, which is called MRD Mill. First, overview of the core dental milling machine developed in this study is ...

  8. Models and evaluation of human-machine systems

    E-Print Network [OSTI]

    Bayout Alvarenga, Marco Antonio

    1993-01-01

    The field of human-machine systems and human-machine interfaces is very multidisciplinary. We have to navigate between the knowledge waves brought by several areas of the human learning: cognitive psychology, artificial ...

  9. Power Electronics and Electrical Machines Review, August 2006...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electrical Machines Review, August 2006 Power Electronics and Electrical Machines Review, August 2006 This report is a summary of the Review Panel at the FY06 DOE FreedomCAR and...

  10. Thermal analysis and air flow modelling of electrical machines 

    E-Print Network [OSTI]

    Chong, Yew Chuan

    2015-06-29

    Thermal analysis is an important topic that can affect the electrical machine performance, reliability, lifetime and efficiency. In order to predict the electrical machine thermal performance accurately, thermal analysis ...

  11. Quantum Support Vector Machine for Big Data Classification

    E-Print Network [OSTI]

    Mohseni, Masoud

    Supervised machine learning is the classification of new data based on already classified training examples. In this work, we show that the support vector machine, an optimized binary classifier, can be implemented on a ...

  12. Optimization Problems Related to Zigzag Pocket Machining \\Lambda

    E-Print Network [OSTI]

    Arkin, Estie

    for tool retractions, i.e. for lifting the tool for non­cutting movements. 1 #12; of axes of a milling machine which need to be driven simultaneously in order to accomplish a machining task. The particular

  13. An evaluation of support vector machines in consumer credit analysis

    E-Print Network [OSTI]

    Mattocks, Benjamin A

    2013-01-01

    This thesis examines a support vector machine approach for determining consumer credit. The support vector machine using a radial basis function (RBF) kernel is compared to a previous implementation of a decision tree ...

  14. Using Machine Teaching to Identify Optimal Training-Set Attacks on Machine

    E-Print Network [OSTI]

    Zhu, Xiaojin "Jerry"

    learning and security: training-set attacks on machine learners. In such attacks an attacker contaminates-set attacks to increase in the future as more intelligent systems (e.g. wearable devices, cars, smart houses

  15. Using Machine Teaching to Identify Optimal Training-Set Attacks on Machine Learners

    E-Print Network [OSTI]

    Zhu, Xiaojin "Jerry"

    and security: training-set attacks on machine learners. In such attacks an attacker contaminates the training.g. wearable devices, cars, smart houses and robots) include a "life long learning" com- ponent. The attacker

  16. Design of a desktop milling machine for fabrication in an introductory machine shop class

    E-Print Network [OSTI]

    Lorenc, Dan (Daniel P.)

    2010-01-01

    The purpose of this research is to design, fabricate and test the electromechanical subsystem of a CNC milling machine kit. Unlike all other CNC kits on the market, the purpose of this kit is to teach students the principles ...

  17. International Conference on Machine Control & Guidance 2008 1 Universal Developer Platform for Machine Control

    E-Print Network [OSTI]

    . Furthermore 1D, 2D or 3D guidance or control of complex machinery generally includes heavy and diverse (design) · display hints (for guidance) or control actuators (e.g. engines or valves) 2 MACHINE AUTOMATION

  18. Covered Product Category: Water-Cooled Ice Machines

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Federal Energy Management Program (FEMP) provides acquisition guidance and federal efficiency requirements for water-cooled ice machines.

  19. Global Tunnel Boring Machine Industry 2015 Market Research Report...

    Open Energy Info (EERE)

    Global Tunnel Boring Machine Industry 2015 Market Research Report Home There are currently no posts in this category. Syndicate content...

  20. Machine Learning, Quantum Mechanics, and Chemical Compound Space

    E-Print Network [OSTI]

    Ramakrishnan, Raghunathan

    2015-01-01

    We review recent studies dealing with the generation of machine learning models of molecular and solid properties.

  1. Environmental Assessment for the Leasing of Facilities and Equipment to USEC Inc.

    SciTech Connect (OSTI)

    N /A

    2002-10-18

    The U.S. Department of Energy (DOE) Oak Ridge Operations Office (DOE-ORO) has prepared this Environmental Assessment (EA) for the lease of facilities and equipment to USEC Inc. (USEC), which would be used in its Gas Centrifuge Research and Development (R&D) Project at the East Tennessee Technology Park (ETTP) [hereinafter referred to as the USEC EA]. The USEC EA analyzes the potential environmental impacts of DOE leasing facility K-101 and portions of K-1600, K-1220 and K-1037 at the ETTP to USEC for a minimum 3-year period, with additional option periods consistent with the Oak Ridge Accelerated Clean-up Plan (ACP) Agreement. In July 2002, USEC notified DOE that it intends to use certain leased equipment at an off-site facility at the Centrifuge Technology Center (CTC) on the Boeing Property. The purpose of the USEC Gas Centrifuge R&D Project is to develop an economically attractive gas centrifuge machine and process using DOE's centrifuge technology.

  2. From Continuation Passing Style to Krivine's Abstract Machine

    E-Print Network [OSTI]

    Selinger, Peter

    From Continuation Passing Style to Krivine's Abstract Machine Peter Selinger Department different extensions of typed lambda calculus, how the rules for a version of Krivine's abstract machine can-in types and primitive functions. We also show how Krivine's abstract machine can be implemented

  3. Techniac and Cost Assessment of the PCAST Machine

    E-Print Network [OSTI]

    Techniac and Cost Assessment of the PCAST Machine Final Report PCAST ITER Volume II Chapter 3 and Cost Assessment of the PCAST Machine - Final Report - Volume II Chapter 3.0 - Engineering Chapter 4 175 183 z 207 z #12;#12;Chapter 3 Engineering Design of the PCAST Machine Introduction (J. Schmidt, J

  4. MACHINE LEARNING METHODS WITHOUT TEARS: A PRIMER FOR ECOLOGISTS

    E-Print Network [OSTI]

    Poff, N. LeRoy

    MACHINE LEARNING METHODS WITHOUT TEARS: A PRIMER FOR ECOLOGISTS Julian D. Olden School of Aquatic modeling abstract Machine learning methods, a family of statistical techniques with origins in the field to other disciplines. One potential explanation for this lack of interest is that machine learning

  5. Turing Machine as an ecological model for Task Analysis

    E-Print Network [OSTI]

    Frénod, Emmanuel

    1 Turing Machine as an ecological model for Task Analysis Thierry Morineau, Emmanuel Frénod model is based on the Turing Machine formalism and takes into account the variety of situations that can opening a door. Keywords: Cognitive work analysis, task analysis, Turing machine, affordance #12;3 1

  6. Is Machine Learning the Wrong Name? Xiaojin Zhu

    E-Print Network [OSTI]

    Zhu, Xiaojin "Jerry"

    Is Machine Learning the Wrong Name? Xiaojin Zhu Department of Computer Sciences University of Wisconsin-Madison October 2010 (University of Wisconsin) Is Machine Learning the Wrong Name? 1 / 33 #12;Iris Learns "Cow" (University of Wisconsin) Is Machine Learning the Wrong Name? 2 / 33 #12;Iris Learns "Cow

  7. Incremental Machine Descriptions for GCC Sameera Deshpande Uday P. Khedker

    E-Print Network [OSTI]

    Khedker, Uday

    Incremental Machine Descriptions for GCC Sameera Deshpande Uday P. Khedker Indian Institute of Technology, Bombay {sameera,uday}@cse.iitb.ac.in Abstract The mechanism of providing machine descriptions a GCC port exists. However, this mechanism is quite ad hoc and the machine descriptions are dif- ficult

  8. AES Flow Interception : Key Snooping Method on Virtual Machine.

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    AES Flow Interception : Key Snooping Method on Virtual Machine. - Exception Handling Attack for AES for snooping AES en- cryption key on Virtual Machine Monitor (VMM), and we present coun- termeasures against. In general, the virtualization technology composes two software parts: one is vir- tual machine (VM

  9. Technical and Cost Assessment of the PCAST Machine

    E-Print Network [OSTI]

    Technical and Cost Assessment of the PCAST Machine Final Report PCAST ITER Volume II Chapter 4 an ignition-moderate-burn device smaller and less costly than ITER, the costing for this machine is presented ITER merely used fixed numbers or the data was considered more representative of the PCAST machine

  10. Kernel Machine Based Feature Extraction Algorithms for Regression Problems

    E-Print Network [OSTI]

    Szepesvari, Csaba

    Kernel Machine Based Feature Extraction Algorithms for Regression Problems Csaba Szepesv´ari 1 and Andr´as Kocsor and Korn´el Kov´acs 2 Abstract. In this paper we consider two novel kernel machine based performance of the algorithm. The second algo- rithm combines kernel machines with average derivative

  11. Single-machine Multiple-recipe Predictive Maintenance , John Hasenbein

    E-Print Network [OSTI]

    Hasenbein, John

    Single-machine Multiple-recipe Predictive Maintenance Yiwei Cai , John Hasenbein , Erhan assume that the controller knows both the machine status and the current number of jobs in the system into account the machine's degradation status, such control decisions are known as predictive maintenance

  12. From Continuation Passing Style to Krivine's Abstract Machine

    E-Print Network [OSTI]

    Selinger, Peter

    From Continuation Passing Style to Krivine's Abstract Machine Peter Selinger Department different extensions of typed lambda calculus, how the rules for a version of Krivine's abstract machine can­in types and primitive functions. We also show how Krivine's abstract machine can be implemented

  13. 72 09-2011 elektor The Chaos Machine

    E-Print Network [OSTI]

    Ambaum, Maarten

    72 09-2011 elektor retronics The Chaos Machine Analogue computing rediscovered (1) For some of us reliability. Analogue computers are machines that are built to behave as the system we want to compute. They are powerful and engaging computing machines that are cheap and simple to build. This two-part Retronics

  14. Entity Authentication and Authenticated Key Exchange with Tree Parity Machines

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    synchronization of two in­ teracting identically structured Tree Parity Machines (TPMs) has been proposed underEntity Authentication and Authenticated Key Exchange with Tree Parity Machines Markus Volkmer key exchange in the framework of Tree Parity Machines (TPMs). The interaction of TPMs has been

  15. Synthesis for Logical Initializability of Synchronous Finite State Machines

    E-Print Network [OSTI]

    Synthesis for Logical Initializability of Synchronous Finite State Machines Montek Singh Steven M for the synthesis for logical initializability of synchronous state machines. The goal is to synthesize a gate to physically reset machines if they get out of synchronism. Furthermore, a form of initializability called

  16. EXECUTION MACHINE FOR SYNCHRONOUS LANGUAGES Charles ANDR Hdi BOUFAED

    E-Print Network [OSTI]

    André, Charles

    EXECUTION MACHINE FOR SYNCHRONOUS LANGUAGES Charles ANDR� Hédi BOUFAÏED Laboratoire I3S, Université on a the synchronous paradigm, and explains the role and the architecture of the execution machine. Keywords: synchronous programming, execution machine, control, implementation. NOMENCLATURE We use Courier as the font

  17. Processor Networks and Alternating Machines Jonathan F. Buss

    E-Print Network [OSTI]

    Buss, Jonathan

    ­ rived from alternating machines by the method pre­ sented here is that the synchronization requirementsProcessor Networks and Alternating Machines Jonathan F. Buss University of Waterloo \\Lambda networks are shown to be equivalent to alternating machines, in which the memory­access structure

  18. Synthesis for Logical Initializability of Synchronous Finite State Machines \\Lambda

    E-Print Network [OSTI]

    Synthesis for Logical Initializability of Synchronous Finite State Machines \\Lambda Montek Singh is introduced for the synthesis for logical initializability of synchronous state machines. The goal that initializes the state machine is called its synchronizing sequence or initialization sequence. A synchronizing

  19. EE 444.3 (3L) Electric Machines II

    E-Print Network [OSTI]

    Saskatchewan, University of

    EE 444.3 (3L) Electric Machines II Department of Electrical and Computer Engineering Winter 2015 Description: This course provides an in-depth analysis of electric machines, the drive systems and the dynamic behavior of electric machines. Topics include inrush current, current and voltage transformer errors, dc

  20. Mechanical design of a desktop milling machine for fabrication in an introductory machining class by Johannes Schneider.

    E-Print Network [OSTI]

    Schneider, Johannes (Johannes A.)

    2010-01-01

    The purpose of this research is the mechanical design of a miniature desktop milling machine for use as an alternative class project in MIT's introductory machining course 2.670. This research is important, because a ...