Powered by Deep Web Technologies
Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Integrated Inverter For Driving Multiple Electric Machines  

DOE Patents (OSTI)

An electric machine drive (50) has a plurality of inverters (50a, 50b) for controlling respective electric machines (57, 62), which may include a three-phase main traction machine (57) and two-phase accessory machines (62) in a hybrid or electric vehicle. The drive (50) has a common control section (53, 54) for controlling the plurality of inverters (50a, 50b) with only one microelectronic processor (54) for controlling the plurality of inverters (50a, 50b), only one gate driver circuit (53) for controlling conduction of semiconductor switches (S1-S10) in the plurality of inverters (50a, 50b), and also includes a common dc bus (70), a common dc bus filtering capacitor (C1) and a common dc bus voltage sensor (67). The electric machines (57, 62) may be synchronous machines, induction machines, or PM machines and may be operated in a motoring mode or a generating mode.

Su, Gui-Jia [Knoxville, TN; Hsu, John S [Oak Ridge, TN

2006-04-04T23:59:59.000Z

2

Combined Electric Machine and Current Source Inverter Drive System ...  

Wind power generators ; Industrial power generators; More Information John S. Hsu. Combined Electric Machine and Current Source Invertor Drive System, U.S ...

3

Electromechanical coupling model for cutterhead driving system of shield machines  

Science Conference Proceedings (OSTI)

The synchronization of the cutterhead driving system of shield machines is affected by not only the nonlinearity of mechanical transmission mechanism and the characteristics of driving motors, but also their interaction. In this paper, dynamics of the ... Keywords: cutterhead, electromechanical coupling, synchronization

Jianzhong Sun; Ran Liu; Yaqin Luo; Wei Sun

2010-11-01T23:59:59.000Z

4

Neuro-Fuzzy Controller of a Sensorless PM Motor Drive For Washing Machines  

E-Print Network (OSTI)

algorithms to enable direct drive from permanent magnet (PM) synchronous motors[3]. #12;Among AC drives, the permanent magnet (PM) motors have became popular, due to its high torque to current ration, large powerNeuro-Fuzzy Controller of a Sensorless PM Motor Drive For Washing Machines Kasim M. Al

5

Electricity use by machine drives varies significantly by ...  

U.S. Energy Information Administration (EIA)

Greenhouse gas data, voluntary report- ing, electric power plant emissions. ... Fossil fuels may be used to drive turbines, reciprocating engines, ...

6

Combined Electric Machine and Current Source Inverter Drive System  

This integration of these two ORNL ... elimination of several components reduces drive system cost, weight, and volume. ... Energy and Transportation Science Division

7

Combination spindle-drive system for high precision machining  

DOE Patents (OSTI)

A combination spindle-drive is provided for fabrication of optical quality surface finishes. Both the spindle-and-drive utilize the spindle bearings for support, thereby removing the conventional drive-means bearings as a source of vibration. An airbearing spindle is modified to carry at the drive end a highly conductive cup-shaped rotor which is aligned with a stationary stator to produce torque in the cup-shaped rotor through the reaction of eddy currents induced in the rotor. This arrangement eliminates magnetic attraction forces and all force is in the form of torque on the cup-shaped rotor.

Gerth, Howard L. (Knoxville, TN)

1977-07-26T23:59:59.000Z

8

EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Electric Drive (Power Electric Drive (Power Electronics and Electric Machines) Workshop Tuesday, July 24, 2012 - Doubletree O'Hare, Chicago, IL Event Objective: DOE aims to obtain stakeholder input on the Power Electronics and Electric Machines (PEEM) goals of the EV Everywhere Grand Challenge. This input will advise the aggressive next-generation technology research and development necessary to enable U.S. companies to be the first in the world to produce plug-in electric vehicles (PEVs) that are as affordable and convenient for the average American family as today's gasoline-powered vehicles within the next 10 years. The EV Everywhere Grand Challenge Electric Drive (Power Electronics and Electric Machines) Workshop was attended by senior officials of the Department of Energy and representatives from the following

9

In-line drivetrain and four wheel drive work machine using same  

DOE Patents (OSTI)

A four wheel drive articulated mine loader is powered by a fuel cell and propelled by a single electric motor. The drivetrain has the first axle, second axle, and motor arranged in series on the work machine chassis. Torque is carried from the electric motor to the back differential via a pinion meshed with the ring gear of the back differential. A second pinion oriented in an opposite direction away from the ring gear is coupled to a drive shaft to transfer torque from the ring gear to the differential of the front axle. Thus, the ring gear of the back differential acts both to receive torque from the motor and to transfer torque to the forward axle. The in-line drive configuration includes a single electric motor and a single reduction gear to power the four wheel drive mine loader.

Hoff, Brian (East Peoria, IL)

2008-08-05T23:59:59.000Z

10

Improving the Efficiency of Die Casting Machine Hydraulic Systems with the Retrofit of Adjustable Frequency Drives  

E-Print Network (OSTI)

Die casting is a common method of light metal processing which is used to produce accurately dimensioned, sharply defined metal parts. Most die casting machines in use today utilize a complex hydraulic system to perform the necessary work required for the process. The pressure and flow rate demands on the hydraulic system vary significantly throughout the cycle. Many older systems are greatly oversized so that they are able to meet the peak hydraulic demand at any point. These systems operate inefficiently because there is typically no way to limit the hydraulic capacity during periods of low demand. As a result, fluid is throttled to lower pressures and excess fluid flow is routed directly back to the system reservoir, wasting motor energy and increasing the thermal load on the cooling system. One option for improving the efficiency of older die casting machines currently in use is the retrofit of an adjustable frequency drive, or AFD. An AFD allows the speed of the pump motor to be varied, changing the pump output to suit the cycle demands. This minimizes the amount of wasted energy without affecting other process parameters. This paper will discuss the die casting process and examine the energy savings potential of retrofitting die casting machines with adjustable frequency drives.

Ambs, L.; Kosanovic, D.; Edberg, C.

1999-05-01T23:59:59.000Z

11

EV Everywhere EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop Agenda  

NLE Websites -- All DOE Office Websites (Extended Search)

- 7/20/2012 - 7/20/2012 EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop Tuesday, July 24, 2012 - Doubletree O'Hare, Chicago, IL Event Objective: DOE aims to obtain stakeholder input on the Power Electronics and Electric Machines (PEEM) goals of the EV Everywhere Grand Challenge. This input will advise the aggressive next- generation technology research and development necessary to enable U.S. companies to be the first in the world to produce plug-in electric vehicles (PEVs) that are as affordable and convenient for the average American family as today's gasoline-powered vehicles within the next 10 years. 8:30-8:35 AM CONTINENTAL BREAKFAST 8:30-8:35 AM CALL TO ORDER Mr. Patrick Davis, DOE EERE Vehicle Technologies Program

12

The Electrochemical Surface Potential Due to Classical Point Charge Models Drives Anion Adsorption to the Air-Water Interface  

E-Print Network (OSTI)

We demonstrate that the driving forces for ion adsorption to the air-water interface for point charge models results from both cavitation and a term that is of the form of a negative electrochemical surface potential. We carefully characterize the role of the free energy due to the electrochemical surface potential computed from simple empirical models and its role in ionic adsorption within the context of dielectric continuum theory. Our research suggests that the electrochemical surface potential due to point charge models provides anions with a significant driving force to the air-water interface. This is contrary to the results of ab initio simulations that indicate that the average electrostatic surface potential should favor the desorption of anions at the air-water interface. The results have profound implications for the studies of ionic distributions in the vicinity of hydrophobic surfaces and proteins.

Marcel D. Baer; Abraham C. Stern; Yan Levin; Douglas J. Tobias; Christopher J. Mundy

2013-07-05T23:59:59.000Z

13

Electrochemical machining process for forming surface roughness elements on a gas turbine shroud  

SciTech Connect

The back side recessed cooling surface of a shroud defining in part the hot gas path of a turbine is electrochemically machined to provide surface roughness elements and spaces therebetween to increase the heat transfer coefficient. To accomplish this, an electrode with insulating dielectric portions and non-insulating portions is disposed in opposition to the cooling surface. By passing an electrolyte between the cooling surface and electrode and applying an electrical current between the electrode and a shroud, roughness elements and spaces therebetween are formed in the cooling surface in opposition to the insulating and non-insulating portions of the electrode, hence increasing the surface area and heat transfer coefficient of the shroud.

Lee, Ching-Pang (Cincinnati, OH); Johnson, Robert Alan (Simpsonville, SC); Wei, Bin (Mechanicville, NY); Wang, Hsin-Pang (Rexford, NY)

2002-01-01T23:59:59.000Z

14

Machining  

NLE Websites -- All DOE Office Websites (Extended Search)

laboratory equipment. Machinery includes live spindle tooling lathes, CNC lathes, CNC milling machines, wire-cut EDMs, a high-speed machining center and a CNC four-axis EDM...

15

EV3 : Traction drives and generators A: Electric machine design and optimization 1  

E-Print Network (OSTI)

of Rotor Structure and Number of Phases on First and Second Order Characteristics of TOYOTA PRIUS torque, torque-speed characteristics. I. STUDIED PRIUS MACHINE A. The average torque Taverage (first of PRIUS machine. A methodology consists of coupling between an optimization program of Matlab and the FEM

Paris-Sud XI, Université de

16

Modern automatic system for the optimization of the electrical drives for working machines with mechanical branches  

Science Conference Proceedings (OSTI)

After a consequent adjustable electric drives experience, once with establish of the analysis desiderata's, during of prepares and experimentations time, there are selected some few problems who underlie this work definition. This paper brings some contributions ... Keywords: electric drive system, flux bearing, frequency converter, speed adjustment of a high power asynchronous motor, system for adjustment speed to asynchronous motor

Mihail-Florin Stan; Marcel Ionel; Octavian-Marcel Ionel

2006-10-01T23:59:59.000Z

17

Performance evaluation of a permanent magnet brushless DC linear drive for high-speed machining using finite element analysis  

Science Conference Proceedings (OSTI)

Keywords: FEA, coupled magneto-thermal, electric field, electromagnetic, linear motor drives, magnetic field, static

George Abdou; William Tereshkovich

2000-05-01T23:59:59.000Z

18

Non-linear analysis of advanced high-phase number induction machines for adjustable speed drive applications  

E-Print Network (OSTI)

This study focuses on the effect of high order phases on electrical machines' parameters and performance. A general approach has been conducted using the induction motor equivalent circuit, winding function and conventional design methods. This approach was supported with finite element analysis. The study shows that high order phase machines have higher peak torque than the equivalent three phase machines. This is attributed to the lower leakage inductance that decreases as the number of phases increases. However, the peak slip frequency increases causing an increase in the skin effect and losses of the rotor. Some design suggestions are proposed to resolve this issue. The conducted harmonic analysis shows that high order harmonics (3rd, 5th, ..) that generate pulsating torque in the three phase machine can be used in high order phase machines to generate torque. For this purpose, a multiphase coordinate transformation and a revised dq model of the five phase induction motor under the fundamental and third harm,monic currents are established in a newly defined d?q?d?q?n reference frame. An extensive analysis using the finite element package has been conducted to compare the performance of different machines when supplied with quasi-rectangular currents with concentrated windings. From torque per ampere point of view, five-phase machine shows an outstanding performance compared with other machines. Futhermore, additional analysis has been conducted for the five-phase and three-phase machines when supplied with sinusoidal voltage source. Experiments have been performed on a 7.5hp five-phase induction motor using TMS320C32 DSP to systematically test and compare stator tooth flux densities and torques in the presence and absence of third harmonic currents. The results obtained are consistent with theoretical studies and simulation analysis, which further demonstrate the feasibility and practical significance of the high-order phase machines.

Qahtany, Nasser H.

2002-01-01T23:59:59.000Z

19

Power Electronics and Electric Machines  

NLE Websites -- All DOE Office Websites (Extended Search)

PEEM Activities Application Power Electronics Electric Machines Traction Drive System Inverter & Boost Converter (if needed) MotorGenerator Vehicle Power Management Bi-directional...

20

Experimental Approach of a High Performance Control of Two PermanentMagnet Synchronous Machines in an Integrated Drive for Automotive Applications  

SciTech Connect

The close-loop digital signal processor (DSP) control of an integrated-dual inverter, which is able to drive two permanent magnet (PM) motors independently, is presented and evaluated experimentally. By utilizing the neutral point of the main traction motor, only two inverter poles are needed for the two-phase auxiliary motor. The modified field-oriented control scheme for this integrated inverter was introduced and employed in real-time control. The experimental results show the inverter is able to control two drives independently. An integrated, component count reduced drive is achieved.

Tang, Lixin [ORNL; Su, Gui-Jia [ORNL

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

High-Performance Control of Two Three-Phase Permanent-Magnet Synchronous Machines in an Integrated Drive for Automotive Applications  

SciTech Connect

The closed-loop control of an integrated dual AC drive system is presented to control two three-phase permanent-magnet motors. A five-leg inverter is employed in the drive system; three of the inverter legs are for a main traction motor, but only two are needed for a three-phase auxiliary motor by utilizing the neutral point of the traction motor. An integrated drive with reduced component count is therefore achieved by eliminating one inverter leg and its gate drivers. A modified current control scheme based on the rotor flux orientation principle is presented. Simulation and experimental results are included to verify the independent control capability of the integrated drive.

Tang, Lixin [ORNL; Su, Gui-Jia [ORNL

2008-01-01T23:59:59.000Z

22

High-megawatt Electric Drive Motors  

Science Conference Proceedings (OSTI)

... Page 2. © ABB BU Machines April 10, 2009 | Slide 2 High-megawatt Electric Drive Motors ... motor concept ... A selection of compressor motors >30MW. ...

2012-10-21T23:59:59.000Z

23

Electrochemical Energy Storage Technical Team Roadmap  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrochemical Energy Storage Electrochemical Energy Storage Technical Team Roadmap June 2013 This roadmap is a document of the U.S. DRIVE Partnership. U.S. DRIVE (Driving Research and Innovation for Vehicle efficiency and Energy sustainability) is a voluntary, non-binding, and nonlegal partnership among the U.S. Department of Energy; USCAR, representing Chrysler Group LLC, Ford Motor Company, and General Motors; Tesla Motors; five energy companies - BP America, Chevron Corporation, Phillips 66 Company, ExxonMobil Corporation, and Shell Oil Products US; two utilities - Southern California Edison and DTE Energy; and the Electric Power Research Institute (EPRI). The Electrochemical Energy Storage Technical Team is one of 12 U.S. DRIVE technical teams ("tech teams") whose mission is to accelerate the development of pre-competitive and innovative technologies to

24

ELECTROCHEMICAL MACHINING OF CARBIDES AND BORIDES  

E-Print Network (OSTI)

psig) Flow '1' 1 Ure /),V (volts) II ~ rate I I I hole }Iflarge capacitor (300,000 mFd at 50 Volts) across the outputof delivering 500 amps at 30 Volts maximum; the cutting

Dissaux, Bernard Antoine

2011-01-01T23:59:59.000Z

25

Electrochemical cell  

DOE Patents (OSTI)

An electrochemical cell is described having a bimodal positive electrode, a negative electrode of an alkali metal, and a compatible electrolyte including an alkali metal salt molten at the cell operating temperature. The positive electrode has an electrochemically active layer of at least one transition metal chloride at least partially present as a charging product, and additives of bromide and/or iodide and sulfur in the positive electrode or the electrolyte. Electrode volumetric capacity is in excess of 400 Ah/cm{sup 3}; the cell can be 90% recharged in three hours and can operate at temperatures below 160 C. There is also disclosed a method of reducing the operating temperature and improving the overall volumetric capacity of an electrochemical cell and for producing a positive electrode having a BET area greater than 6{times}10{sup 4}cm{sup 2}/g of Ni. 6 figs.

Redey, L.I.; Vissers, D.R.; Prakash, J.

1996-07-16T23:59:59.000Z

26

Electrochemical cell  

DOE Patents (OSTI)

An electrochemical cell having a bimodal positive electrode, a negative electrode of an alkali metal, and a compatible electrolyte including an alkali metal salt molten at the cell operating temperature. The positive electrode has an electrochemically active layer of at least one transition metal chloride at least partially present as a charging product, and additives of bromide and/or iodide and sulfur in the positive electrode or the electrolyte. Electrode volumetric capacity is in excess of 400 Ah/cm.sup.3 ; the cell can be 90% recharged in three hours and can operate at temperatures below 160.degree. C. There is also disclosed a method of reducing the operating temperature and improving the overall volumetric capacity of an electrochemical cell and for producing a positive electrode having a BET area greater than 6.times.10.sup.4 cm.sup.2 /g of Ni.

Redey, Laszlo I. (Downers Grove, IL); Vissers, Donald R. (Naperville, IL); Prakash, Jai (Downers Grove, IL)

1994-01-01T23:59:59.000Z

27

Electrochemical cell  

DOE Patents (OSTI)

An electrochemical cell having a bimodal positive electrode, a negative electrode of an alkali metal, and a compatible electrolyte including an alkali metal salt molten at the cell operating temperature. The positive electrode has an electrochemically active layer of at least one transition metal chloride at least partially present as a charging product, and additives of bromide and/or iodide and sulfur in the positive electrode or the electrolyte. Electrode volumetric capacity is in excess of 400 Ah/cm.sup.3 ; the cell can be 90% recharged in three hours and can operate at temperatures below 160.degree. C. There is also disclosed a method of reducing the operating temperature and improving the overall volumetric capacity of an electrochemical cell and for producing a positive electrode having a BET area greater than 6.times.10.sup.4 cm.sup.2 /g of Ni.

Redey, Laszlo I. (6851 Carpenter St., Downers Grove, IL 60516); Vissers, Donald R. (611 Clover Ct., Naperville, IL 60540); Prakash, Jai (2205 Arbor Cir. 8, Downers Grove, IL 60515)

1996-01-01T23:59:59.000Z

28

Current drive, anticurrent drive, and balanced injection  

SciTech Connect

In lower hybrid (LH) discharges, the number of suprathermal electrons is limited by the upper bound on the current density from the q = 1 condition, which is caused by the onset of the m = 1 MHD instability. The stored energy of suprathermal electrons, measured in terms of a poloidal beta, scales with plasma current as I/sub p//sup -1/. Potentially, these bounds represent very restrictive conditions for heating in larger machines. Consequently, it seems necessary to perform experiments where the electrons are driven in both directions, parallel and antiparallel to the magnetic field, i.e., bidirectional scenarios like anticurrent drive or balanced injection. Data from PLT relevant to these ideas are discussed. 6 refs., 4 figs.

von Goeler, S.; Stevens, J.; Beiersdorfer, P.; Bell, R.; Bernabei, S.; Bitter, M.; Cavallo, A.; Chu, T.K.; Fishman, H.; Hill, K.

1987-08-01T23:59:59.000Z

29

Electrochemical device  

DOE Patents (OSTI)

A tunnel protected electrochemical device features channels fluidically communicating between manifold, tunnels and cells. The channels are designed to provide the most efficient use of auxiliary power. The channels have a greater hydraulic pressure drop and electrical resistance than the manifold. This will provide a design with the optimum auxiliary energy requirements.

Grimes, Patrick G. (Westfield, NJ); Einstein, Harry (Springfield, NJ); Bellows, Richard J. (Westfield, NJ)

1988-01-12T23:59:59.000Z

30

Electrochemical construction  

DOE Patents (OSTI)

An electrochemical cell construction features a novel co-extruded plastic electrode in an interleaved construction with a novel integral separator-spacer. Also featured is a leak and impact resistant construction for preventing the spill of corrosive materials in the event of rupture.

Einstein, Harry (Springfield, NJ); Grimes, Patrick G. (Westfield, NJ)

1983-08-23T23:59:59.000Z

31

Electric machine  

SciTech Connect

An interior permanent magnet electric machine is disclosed. The interior permanent magnet electric machine comprises a rotor comprising a plurality of radially placed magnets each having a proximal end and a distal end, wherein each magnet comprises a plurality of magnetic segments and at least one magnetic segment towards the distal end comprises a high resistivity magnetic material.

El-Refaie, Ayman Mohamed Fawzi (Niskayuna, NY); Reddy, Patel Bhageerath (Madison, WI)

2012-07-17T23:59:59.000Z

32

Meso-machining  

NLE Websites -- All DOE Office Websites (Extended Search)

following meso-machin- ing technologies: * Focused ion beam (FIB) machining, * Micro-milling and -turning, * Femto-second laser machining * Micro-Electro Discharge Machining...

33

Electrochemical cell  

DOE Patents (OSTI)

An electrochemical cell having an alkali metal negative electrode such as sodium and a positive electrode including Ni or transition metals, separated by a .beta." alumina electrolyte and NaAlCl.sub.4 or other compatible material. Various concentrations of a bromine, iodine and/or sulfur containing additive and pore formers are disclosed, which enhance cell capacity and power. The pore formers may be the ammonium salts of carbonic acid or a weak organic acid or oxamide or methylcellulose.

Redey, Laszlo I. (Downers Grove, IL); Vissers, Donald R. (Naperville, IL); Prakash, Jai (Downers Grove, IL)

1994-01-01T23:59:59.000Z

34

Electrochemical cell  

DOE Patents (OSTI)

This invention is comprised of an electrochemical cell has a layer-type or sandwich configuration with a Teflon center section that houses working, reference and counter electrodes and defines a relatively narrow electrolyte cavity. The center section is surrounded on both sides with thin Teflon membranes. The membranes are pressed in place by a pair of Teflon inner frames which are in turn supported by a pair of outer metal frames. The pair of inner and outer frames are provided with corresponding, appropriately shaped slits that are in plane generally transverse to the plane of the working electrode and permit X-ray beams to enter and exit the cell through the Teflon membranes that cover the slits so that the interface between the working electrode and the electrolyte within the cell may be analyzed by transmission geometry. In one embodiment, the center section consists of two parts, one on top of the other. Alternatively, the center section of the electrochemical cell may consist of two intersliding pieces or may be made of a single piece of Teflon sheet material. The electrolyte cavity is shaped so that the electrochemical cell can be rotated 900 in either direction while maintaining the working-and counter electrodes submerged in the electrolyte.

Nagy, Z.; Yonco, R.M.; You, Hoydoo; Melendres, C.A.

1991-04-23T23:59:59.000Z

35

Electrochemical cell  

DOE Patents (OSTI)

An electrochemical cell has a layer-type or sandwich configuration with a Teflon center section that houses working, reference and counter electrodes and defines a relatively narrow electrolyte cavity. The center section is surrounded on both sides with thin Teflon membranes. The membranes are pressed in place by a pair of Teflon inner frames which are in turn supported by a pair of outer metal frames. The pair of inner and outer frames are provided with corresponding, appropriately shaped slits that are in plane generally transverse to the plane of the working electrode and permit X-ray beams to enter and exit the cell through the Teflon membranes that cover the slits so that the interface between the working electrode and the electrolyte within the cell may be analyzed by transmission geometry. In one embodiment, the center section consists of two parts, one on top of the other. Alternatively, the center section of the electrochemical cell may consist of two intersliding pieces or may be made of a single piece of Teflon sheet material. The electrolyte cavity is shaped so that the electrochemical cell can be rotated 90[degree] in either direction while maintaining the working and counter electrodes submerged in the electrolyte. 5 figs.

Nagy, Z.; Yonco, R.M.; You, H.; Melendres, C.A.

1992-08-25T23:59:59.000Z

36

Traction sheave elevator, hoisting unit and machine space  

DOE Patents (OSTI)

Traction sheave elevator consisting of an elevator car moving along elevator guide rails, a counterweight moving along counterweight guide rails, a set of hoisting ropes (3) on which the elevator car and counterweight are suspended, and a drive machine unit (6) driving a traction sheave (7) acting on the hoisting ropes (3) and placed in the elevator shaft. The drive machine unit (6) is of a flat construction. A wall of the elevator shaft is provided with a machine space with its open side facing towards the shaft, the essential parts of the drive machine unit (6) being placed in the space. The hoisting unit (9) of the traction sheave elevator consists of a substantially discoidal drive machine unit (6) and an instrument panel (8) mounted on the frame (20) of the hoisting unit.

Hakala, Harri (Hyvinkaa, FI); Mustalahti, Jorma (Hyvinkaa, FI); Aulanko, Esko (Kerava, FI)

2000-01-01T23:59:59.000Z

37

Machine therapy  

E-Print Network (OSTI)

Machine Therapy is a new practice combining art, design, psychoanalysis, and engineering work in ways that access and reveal the vital, though often unnoticed, relevance of people's interactions and relationships with ...

Dobson, Kelly E. (Kelly Elizabeth), 1970-

2007-01-01T23:59:59.000Z

38

Electrochemical cell  

DOE Patents (OSTI)

An electrochemical cell is described having an alkali metal negative electrode such as sodium and a positive electrode including Ni or transition metals, separated by a [beta] alumina electrolyte and NaAlCl[sub 4] or other compatible material. Various concentrations of a bromine, iodine and/or sulfur containing additive and pore formers are disclosed, which enhance cell capacity and power. The pore formers may be the ammonium salts of carbonic acid or a weak organic acid or oxamide or methylcellulose. 6 figs.

Redey, L.I.; Vissers, D.R.; Prakash, J.

1994-08-23T23:59:59.000Z

39

Electrochemical cell  

Science Conference Proceedings (OSTI)

An electrochemical cell is disclosed that has a lithium anode, a thionyl chloride depolarizer and a sulphur dioxide passivation control agent which further includes having the pressure relieved to substantially reduce the internal pressure of the cell. The internal cell pressure is relieved by venting for sufficient time at an elevated temperature to reduce the internal cell pressure to less than five psi at room temperature, preferably by a plurality of venting cycles and a temperature ranging from room temperature to the elevated temperature. Normally, the elevated temperature ranges from at least 100/sup 0/ to greater than 150/sup 0/ F.

Chua, D.L.; Garoutte, K.F.; Levy, L.L.

1982-11-23T23:59:59.000Z

40

Wide electrochemical window solvents for use in electrochemical ...  

Wide electrochemical window solvents for use in electrochemical devices and electrolyte solutions incorporating such solvents United States Patent

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Induction machine  

DOE Patents (OSTI)

A polyphase rotary induction machine for use as a motor or generator utilizing a single rotor assembly having two series connected sets of rotor windings, a first stator winding disposed around the first rotor winding and means for controlling the current induced in one set of the rotor windings compared to the current induced in the other set of the rotor windings. The rotor windings may be wound rotor windings or squirrel cage windings.

Owen, Whitney H. (Ogden, UT)

1980-01-01T23:59:59.000Z

42

Microfluidic electrochemical reactors  

DOE Patents (OSTI)

A microfluidic electrochemical reactor includes an electrode and one or more microfluidic channels on the electrode, where the microfluidic channels are covered with a membrane containing a gas permeable polymer. The distance between the electrode and the membrane is less than 500 micrometers. The microfluidic electrochemical reactor can provide for increased reaction rates in electrochemical reactions using a gaseous reactant, as compared to conventional electrochemical cells. Microfluidic electrochemical reactors can be incorporated into devices for applications such as fuel cells, electrochemical analysis, microfluidic actuation, pH gradient formation.

Nuzzo, Ralph G. (Champaign, IL); Mitrovski, Svetlana M. (Urbana, IL)

2011-03-22T23:59:59.000Z

43

Substrate denaturation and translocation by a proteolytic machine  

E-Print Network (OSTI)

Many AAA+ molecular machines generate power and drive cellular processes by harnessing energy from cycles of ATP hydrolysis. ClpX is a relatively simple AAA+ ATPase that powers regulated protein degradation by binding ...

Kenniston, Jon Anders

2005-01-01T23:59:59.000Z

44

Measured Savings of DC to AC Drive Retrofit in Plastic Extrusion  

E-Print Network (OSTI)

This paper presents the potential electrical energy efficiency improvements for utilizing alternating current (AC) motors controlled by variable frequency drives (VFD) in place of direct current (DC) motors to drive plastic extrusion machines. A brief background on the extrusion process is presented along with typical extrusion machine electrical drive performance requirements. Motor performance characteristics and control strategies are described for both AC and DC machines. A case study is presented, where detailed electrical measurements were performed on two similar extrusion machines driven by a DC motor and an AC motor respectively. Electrical energy, demand, and cost savings are analyzed

Sfeir, R. A.

2008-01-01T23:59:59.000Z

45

Accelerating Turing Machines  

Science Conference Proceedings (OSTI)

Accelerating Turing machines are Turing machines of a sort able to perform tasks that are commonly regarded as impossible for Turing machines. For example, they can determine whether or not the decimal representation of ? contains n consecutive 7s, ... Keywords: ?-machine, Chinese room argument, Church–Turing thesis, accelerating Turing machine, decision problem, effective procedure, halting problem, hypercomputation, hypercomputer, infinity machine, oracle machine, super-task

B. Jack Copeland

2002-05-01T23:59:59.000Z

46

Machine Tool Locator  

NLE Websites -- All DOE Office Websites (Extended Search)

gathered and used to set the position of the machine tool and to measure the size and shape of the machine tool tip, and examine cutting edge wear. April 18, 2013 machine tool...

47

Socially guided machine learning  

E-Print Network (OSTI)

Social interaction will be key to enabling robots and machines in general to learn new tasks from ordinary people (not experts in robotics or machine learning). Everyday people who need to teach their machines new things ...

Thomaz, Andrea Lockerd

2006-01-01T23:59:59.000Z

48

Machines reviving humans  

NLE Websites -- All DOE Office Websites (Extended Search)

The machines you may be referring to include machines to electrically stimulate the heart into again having a normal sequence of electrical impulses necessary for sustained...

49

Electrochemical methane sensor  

DOE Patents (OSTI)

A method and instrument including an electrochemical cell for the detection and measurement of methane in a gas by the oxidation of methane electrochemically at a working electrode in a nonaqueous electrolyte at a voltage about 1.4 volts vs R.H.E. (the reversible hydrogen electrode potential in the same electrolyte), and the measurement of the electrical signal resulting from the electrochemical oxidation.

Zaromb, S.; Otagawa, T.; Stetter, J.R.

1984-08-27T23:59:59.000Z

50

Vehicle Technologies Office: Materials for Hybrid and Electric Drive  

NLE Websites -- All DOE Office Websites (Extended Search)

for Hybrid and for Hybrid and Electric Drive Systems to someone by E-mail Share Vehicle Technologies Office: Materials for Hybrid and Electric Drive Systems on Facebook Tweet about Vehicle Technologies Office: Materials for Hybrid and Electric Drive Systems on Twitter Bookmark Vehicle Technologies Office: Materials for Hybrid and Electric Drive Systems on Google Bookmark Vehicle Technologies Office: Materials for Hybrid and Electric Drive Systems on Delicious Rank Vehicle Technologies Office: Materials for Hybrid and Electric Drive Systems on Digg Find More places to share Vehicle Technologies Office: Materials for Hybrid and Electric Drive Systems on AddThis.com... Just the Basics Hybrid & Vehicle Systems Energy Storage Advanced Power Electronics & Electrical Machines

51

Holiday Food Drive  

NLE Websites -- All DOE Office Websites (Extended Search)

Food Drive Food Drive Holiday Food Drive During the recent holiday food drive, employees donated enough food to provide about 23,604 holiday meals for Northern New Mexico families. More than 432 frozen turkeys were donated this year by employees and other donors during 'Bring a Turkey to Work Day,' an annual Lab event that takes places Thanksgiving week. September 16, 2013 LANL employees organize food for the Holiday Food Drive. Contacts Giving Drives Ed Vigil Community Programs Office (505) 665-9205 Email Giving Drives Enrique Trujillo Community Programs Office (505) 665-6384 Email Helping feed Northern New Mexico families Community partners The Food Depot (Santa Fe) Del Norte Credit Union Smith's Food and Drug Giving Holiday Food Drive Holiday Gift Drive LANL Laces Los Alamos Employees' Scholarship Fund

52

Characterizing electrocatalytic surfaces: Electrochemical and...  

NLE Websites -- All DOE Office Websites (Extended Search)

Characterizing electrocatalytic surfaces: Electrochemical and NMR studies of methanol and carbon monoxide on PtC Title Characterizing electrocatalytic surfaces: Electrochemical...

53

Surface working of 304L stainless steel: Impact on microstructure, electrochemical behavior and SCC resistance  

SciTech Connect

The effect of surface working operations on the microstructure, electrochemical behavior and stress corrosion cracking resistance of 304L stainless steel (SS) was investigated in this study. The material was subjected to (a) solution annealing (b) machining and (c) grinding operations. Microstructural characterization was done using stereo microscopy and electron back scattered diffraction (EBSD) technique. The electrochemical nature of the surfaces in machined, ground and solution annealed condition were studied using potentiodynamic polarization and scanning electrochemical microscopy (SECM) in borate buffer solution. The stress corrosion cracking resistance of 304L SS in different conditions was studied by exposing the samples to boiling MgCl{sub 2} environment. Results revealed that the heavy plastic deformation and residual stresses present near the surface due to machining and grinding operations make 304L SS electrochemically more active and susceptible to stress corrosion cracking. Ground sample showed highest magnitude of current density in the passive potential range followed by machined and solution annealed 304L SS. Micro-electrochemical studies established that surface working promotes localized corrosion along the surface asperities which could lead to crack initiation. - Highlights: Black-Right-Pointing-Pointer Machining/grinding produce extensive grain fragmentation near the surface of 304L SS. Black-Right-Pointing-Pointer Machining/grinding result in martensitic transformation near the surface of 304L SS. Black-Right-Pointing-Pointer Machining/grinding drastically reduce the SCC resistance of 304L SS in chloride. Black-Right-Pointing-Pointer Machining/grinding make the surface of 304L SS electrochemically much more active. Black-Right-Pointing-Pointer SECM study reveal that preferential dissolution takes place along surface asperities.

Acharyya, S.G., E-mail: swati364@gmail.com [Materials Science Division, Bhabha Atomic Research Center, Mumbai (India); Khandelwal, A. [Visvesvaraya National Institute of Technology, Nagpur (India)] [Visvesvaraya National Institute of Technology, Nagpur (India); Kain, V. [Materials Science Division, Bhabha Atomic Research Center, Mumbai (India)] [Materials Science Division, Bhabha Atomic Research Center, Mumbai (India); Kumar, A.; Samajdar, I. [Department of Metallurgical Engineering and Materials Science, IIT Bombay, Mumbai (India)] [Department of Metallurgical Engineering and Materials Science, IIT Bombay, Mumbai (India)

2012-10-15T23:59:59.000Z

54

Electrochemical thermodynamic measurement system  

DOE Patents (OSTI)

The present invention provides systems and methods for accurately characterizing thermodynamic and materials properties of electrodes and electrochemical energy storage and conversion systems. Systems and methods of the present invention are configured for simultaneously collecting a suite of measurements characterizing a plurality of interconnected electrochemical and thermodynamic parameters relating to the electrode reaction state of advancement, voltage and temperature. Enhanced sensitivity provided by the present methods and systems combined with measurement conditions that reflect thermodynamically stabilized electrode conditions allow very accurate measurement of thermodynamic parameters, including state functions such as the Gibbs free energy, enthalpy and entropy of electrode/electrochemical cell reactions, that enable prediction of important performance attributes of electrode materials and electrochemical systems, such as the energy, power density, current rate and the cycle life of an electrochemical cell.

Reynier, Yvan (Meylan, FR); Yazami, Rachid (Los Angeles, CA); Fultz, Brent T. (Pasadena, CA)

2009-09-29T23:59:59.000Z

55

Planar electrochemical device assembly  

DOE Patents (OSTI)

A pre-fabricated electrochemical device having a dense electrolyte disposed between an anode and a cathode preferably deposited as thin films is bonded to a porous electrically conductive support. A second porous electrically conductive support may be bonded to a counter electrode of the electrochemical device. Multiple electrochemical devices may be bonded in parallel to a single porous support, such as a perforated sheet to provide a planar array. Planar arrays may be arranged in a stacked interconnected array. A method of making a supported electrochemical device is disclosed wherein the method includes a step of bonding a pre-fabricated electrochemical device layer to an existing porous metal or porous metal alloy layer.

Jacobson; Craig P. (Lafayette, CA), Visco; Steven J. (Berkeley, CA), De Jonghe; Lutgard C. (Lafayette, CA)

2010-11-09T23:59:59.000Z

56

Planar electrochemical device assembly  

DOE Patents (OSTI)

A pre-fabricated electrochemical device having a dense electrolyte disposed between an anode and a cathode preferably deposited as thin films is bonded to a porous electrically conductive support. A second porous electrically conductive support may be bonded to a counter electrode of the electrochemical device. Multiple electrochemical devices may be bonded in parallel to a single porous support, such as a perforated sheet to provide a planar array. Planar arrays may be arranged in a stacked interconnected array. A method of making a supported electrochemical device is disclosed wherein the method includes a step of bonding a pre-fabricated electrochemical device layer to an existing porous metal or porous metal alloy layer.

Jacobson, Craig P. (Lafayette, CA); Visco, Steven J. (Berkeley, CA); De Jonghe, Lutgard C. (Lafayette, CA)

2007-06-19T23:59:59.000Z

57

AOCS USB Flash Drive  

Science Conference Proceedings (OSTI)

1 GB flash drive. AOCS logo printed on aluminum cover. AOCS USB Flash Drive Membership Merchandise Membership Merchandise 7F95621DF44FEA960BA8EE1D1E39CED4 1 GB USB flash drive. AOCS logo printed on aluminum cover. M-USB 17770

58

Drill drive mechanism  

DOE Patents (OSTI)

A drill drive mechanism is especially adapted to provide both rotational drive and axial feed for a drill of substantial diameter such as may be used for drilling holes for roof bolts in mine shafts. The drill shaft is made with a helical pattern of scroll-like projections on its surface for removal of cuttings. The drill drive mechanism includes a plurality of sprockets carrying two chains of drive links which are arranged to interlock around the drill shaft with each drive link having depressions which mate with the scroll-like projections. As the chain links move upwardly or downwardly the surfaces of the depressions in the links mate with the scroll projections to move the shaft axially. Tangs on the drive links mate with notch surfaces between scroll projections to provide a means for rotating the shaft. Projections on the drive links mate together at the center to hold the drive links tightly around the drill shaft. The entire chain drive mechanism is rotated around the drill shaft axis by means of a hydraulic motor and gear drive to cause rotation of the drill shaft. This gear drive also connects with a differential gearset which is interconnected with a second gear. A second motor is connected to the spider shaft of the differential gearset to produce differential movement (speeds) at the output gears of the differential gearset. This differential in speed is utilized to drive said second gear at a speed different from the speed of said gear drive, this speed differential being utilized to drive said sprockets for axial movement of said drill shaft.

Dressel, Michael O. (Englewood, CO)

1979-01-01T23:59:59.000Z

59

Electricity use by machine drives varies significantly by ...  

U.S. Energy Information Administration (EIA)

Home; Browse by Tag; Most ... share of energy use within that industry because of the significant amounts of ... gains as well as current technology and its potential ...

60

Electricity use by machine drives varies significantly by ...  

U.S. Energy Information Administration (EIA)

The effects of increases in shipments and increases in energy efficiency are considered in EIA's long-term energy projections. For example, in ...

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Vehicle Technologies Office: Electrical Machines  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrical Machines to Electrical Machines to someone by E-mail Share Vehicle Technologies Office: Electrical Machines on Facebook Tweet about Vehicle Technologies Office: Electrical Machines on Twitter Bookmark Vehicle Technologies Office: Electrical Machines on Google Bookmark Vehicle Technologies Office: Electrical Machines on Delicious Rank Vehicle Technologies Office: Electrical Machines on Digg Find More places to share Vehicle Technologies Office: Electrical Machines on AddThis.com... Just the Basics Hybrid & Vehicle Systems Energy Storage Advanced Power Electronics & Electrical Machines Power Electronics Electrical Machines Thermal Control & System Integration Advanced Combustion Engines Fuels & Lubricants Materials Technologies Electrical Machines Emphasis in the electrical machines activity is on advanced motor

62

Handbook of Electrochemical Nanotechnology  

SciTech Connect

This 2-volume handbook provides an overview of recent advances in the field of electrochemical nanotechnology. It will be of great interst to graduate students, scientists, and engineering professionals whose research is at the interface of electrochemistry and nanotechnology.

Lin, Yuehe; Nalwa, H. S.

2009-02-12T23:59:59.000Z

63

Solid state electrochemical composite  

SciTech Connect

Provided is a composite electrochemical device fabricated from highly electronically conductive materials such as metals, metal alloys, or electronically conductive ceramics. The electronic conductivity of the electrode substrate is maximized. The invention allows for an electrode with high electronic conductivity and sufficient catalytic activity to achieve high power density in ionic (electrochemical) devices such as fuel cells and electrolytic gas separation systems including oxygen generation system.

Visco, Steven J. (Berkeley, CA); Jacobson, Craig P. (Moraga, CA); DeJonghe, Lutgard C. (Lafayette, CA)

2009-06-30T23:59:59.000Z

64

Holiday Gift Drive  

NLE Websites -- All DOE Office Websites (Extended Search)

Holiday Gift Drive Holiday Gift Drive Holiday Gift Drive Every year, Laboratory employees help fulfill the holiday wishes of children and seniors in our communities. In 2012, our employees helped more than 1,030 Northern New Mexico children, senior citizens and families have a brighter holiday season. September 16, 2013 Every holiday season, employees of Los Alamos National Laboratory donate and distribute gifts to families in need throughout Northern New Mexico. Contacts Giving Drives Ed Vigil Community Programs Office (505) 665-9205 Email Giving Drives Enrique Trujillo Community Programs Office (505) 665-6384 Email Helping New Mexico families feel the holiday spirit The 2013 campaign runs from November 21-December 18. 2012 Holiday Gift Drive partners Boys and Girls Club Del Norte (Abiquiu Site)

65

Piezoelectric drive circuit  

DOE Patents (OSTI)

A piezoelectric motor drive circuit is provided which utilizes the piezoelectric elements as oscillators and a Meacham half-bridge approach to develop feedback from the motor ground circuit to produce a signal to drive amplifiers to power the motor. The circuit automatically compensates for shifts in harmonic frequency of the piezoelectric elements due to pressure and temperature changes.

Treu, Jr., Charles A. (Raymore, MO)

1999-08-31T23:59:59.000Z

66

Piezoelectric drive circuit  

DOE Patents (OSTI)

A piezoelectric motor drive circuit is provided which utilizes the piezoelectric elements as oscillators and a Meacham half-bridge approach to develop feedback from the motor ground circuit to produce a signal to drive amplifiers to power the motor. The circuit automatically compensates for shifts in harmonic frequency of the piezoelectric elements due to pressure and temperature changes. 7 figs.

Treu, C.A. Jr.

1999-08-31T23:59:59.000Z

67

Traction Drive Systems Breakout  

NLE Websites -- All DOE Office Websites (Extended Search)

Traction Drive Systems Breakout Traction Drive Systems Breakout John M. Miller, PhD, PE, F.IEEE, F.SAE Oak Ridge National Laboratory Facilitator July 24, 2012 EV Everywhere Grand Challenge Vehicle Technologies Program - Advanced Power Electronics and Electric Motors eere.energy.gov EV Everywhere Traction Drive System * DOE goals for Electric Traction Drive System (TDS) innovations must be disruptive innovation focused to meet the CY2022 price target ($20,000 $25,000) for a mid-sized 5 passenger sedan having 5 year simple payback. Enhanced Efficiency Reduced Cost Traction Drive System EETT Roadmap: "Therefore, research is needed to develop technologies that are less expensive and, at the same time, smaller, lighter, more efficient, and equally reliable as conventional automotive technologies. "

68

ELECTROCHEMICAL POWER FOR TRANSPORTATION  

E-Print Network (OSTI)

electric recharge energy in urban driving, kW·h/km Max recharge time, h Safety features Meet Federal Motor Vehicle Safety

Cairns, Elton J.

2012-01-01T23:59:59.000Z

69

Harmonic control of multiple-stator induction machines for voltage regulation  

E-Print Network (OSTI)

Small, one to a few horsepower, three-phase induction machines with three sets of electrically-isolated, magnetically-coupled stator winding circuits are described. A voltage inverter is developed and used to drive one set ...

Holloway, Jack Wade, 1980-

2004-01-01T23:59:59.000Z

70

Base drive and overlap protection circuit  

DOE Patents (OSTI)

An inverter (34) which provides power to an A. C. machine (28) is controlled by a circuit (36) employing PWM control strategy whereby A. C. power is supplied to the machine at a preselectable frequency and preselectable voltage. This is accomplished by the technique of waveform notching in which the shapes of the notches are varied to determine the average energy content of the overall waveform. Through this arrangement, the operational efficiency of the A. C. machine is optimized. The control circuit includes a microcomputer and memory element which receive various parametric inputs and calculate optimized machine control data signals therefrom. The control data is asynchronously loaded into the inverter through an intermediate buffer (38). A base drive and overlap protection circuit is included to insure that both transistors of a complimentary pair are not conducting at the same time. In its preferred embodiment, the present invention is incorporated within an electric vehicle (10) employing a 144 VDC battery pack (32) and a three-phase induction motor (18).

Gritter, David J. (Southfield, MI)

1983-01-01T23:59:59.000Z

71

Electrochemical Thermodynamic Measurement System - Energy ...  

The present invention provides systems and methods for accurately characterizing thermodynamic and materials properties of electrodes and electrochemical energy ...

72

Available Technologies: Electrochemical Environmental Cell ...  

Electrochemical Environmental Cell with Vertical, Aligned Electrodes for TEM IB-3330. ... Energy storage device / battery research and development;

73

Electrochemical Membrane Incinerator  

DOE Patents (OSTI)

Electrochemical incineration of benzoquinone was evaluated as a model for the mineralization of carbon in toxic aromatic compounds. A Ti or Pt anode was coated with a film of the oxides of Ti, Ru, Sn and Sb. This quaternary metal oxide film was stable; elemental analysis of the electrolyzed solution indicated the concentration of these metal ions to be 3 {micro}g/L or less. The anode showed good reactivity for the electrochemical incineration of benzoquinone. The use of a dissolved salt matrix as the so-called ''supporting electrolyte'' was eliminated in favor of a solid-state electrolyte sandwiched between the anode and cathode.

Johnson, Dennis C.; Houk, Linda L.; Feng, Jianren

1998-12-08T23:59:59.000Z

74

Electrochemical micro sensor  

DOE Patents (OSTI)

A micro-amperometric electrochemical sensor for detecting the presence of a pre-determined species in a fluid material is disclosed. The sensor includes a smooth substrate having a thin coating of solid electrolytic material deposited thereon. The working and counter electrodes are deposited on the surface of the solid electrolytic material and adhere thereto. Electrical leads connect the working and counter electrodes to a potential source and an apparatus for measuring the change in an electrical signal caused by the electrochemical oxidation or reduction of the species. Alternatively, the sensor may be fabricated in a sandwich structure and also may be cylindrical, spherical or other shapes.

Setter, Joseph R. (Naperville, IL); Maclay, G. Jordan (Maywood, IL)

1989-09-12T23:59:59.000Z

75

Electrochemical membrane incinerator  

DOE Patents (OSTI)

Electrochemical incineration of p-benzoquinone was evaluated as a model for the mineralization of carbon in toxic aromatic compounds. A Ti or Pt anode was coated with a film of the oxides of Ti, Ru, Sn and Sb. This quaternary metal oxide film was stable; elemental analysis of the electrolyzed solution indicated the concentration of these metal ions to be 3 .mu.g/L or less. The anode showed good reactivity for the electrochemical incineration of benzoquinone. The use of a dissolved salt matrix as the so-called "supporting electrolyte" was eliminated in favor of a solid-state electrolyte sandwiched between the anode and cathode.

Johnson, Dennis C. (Ames, IA); Houk, Linda L. (Ames, IA); Feng, Jianren (Ames, IA)

2001-03-20T23:59:59.000Z

76

Method and apparatus for characterizing and enhancing the functional performance of machine tools  

DOE Patents (OSTI)

Disclosed are various systems and methods for assessing and improving the capability of a machine tool. The disclosure applies to machine tools having at least one slide configured to move along a motion axis. Various patterns of dynamic excitation commands are employed to drive the one or more slides, typically involving repetitive short distance displacements. A quantification of a measurable merit of machine tool response to the one or more patterns of dynamic excitation commands is typically derived for the machine tool. Examples of measurable merits of machine tool performance include workpiece surface finish, and the ability to generate chips of the desired length.

Barkman, William E; Babelay, Jr., Edwin F; Smith, Kevin Scott; Assaid, Thomas S; McFarland, Justin T; Tursky, David A; Woody, Bethany; Adams, David

2013-04-30T23:59:59.000Z

77

finite state machine  

Science Conference Proceedings (OSTI)

... Moore machine), multiple start states, transitions conditioned on no input symbol (a null) or more than one transition for a given symbol and state ( ...

2013-11-08T23:59:59.000Z

78

Intrusions: What Drives Them?  

Science Conference Proceedings (OSTI)

The driving mechanism for the observed interleaving of water masses is generally assumed to be double-diffusive mixing. However, some observations of intrusions have been made in regions where the mean stratification is stable to double-diffusive ...

Dave Hebert

1999-06-01T23:59:59.000Z

79

Control rod drive  

DOE Patents (OSTI)

A control rod drive uses gravitational forces to insert one or more control rods upwardly into a reactor core from beneath the reactor core under emergency conditions. The preferred control rod drive includes a vertically movable weight and a mechanism operatively associating the weight with the control rod so that downward movement of the weight is translated into upward movement of the control rod. The preferred control rod drive further includes an electric motor for driving the control rods under normal conditions, an electrically actuated clutch which automatically disengages the motor during a power failure and a decelerator for bringing the control rod to a controlled stop when it is inserted under emergency conditions into a reactor core.

Hawke, Basil C. (Solana Beach, CA)

1986-01-01T23:59:59.000Z

80

CONTROL ROD DRIVE  

DOE Patents (OSTI)

BS>A drive mechanism was invented for the control rod of a nuclear reactor. Power is provided by an electric motor and an outside source of fluid pressure is utilized in conjunction with the fluid pressure within the reactor to balance the loadings on the motor. The force exerted on the drive mechanism in the direction of scramming the rod is derived from the reactor fluid pressure so that failure of the outside pressure source will cause prompt scramming of the rod.

Chapellier, R.A.

1960-05-24T23:59:59.000Z

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Simulation of Photovoltaic Array-driven Electric Machines with Power Electronic Interfaces  

Science Conference Proceedings (OSTI)

Power electronic interfaces between photovoltaic (PV) arrays and electric machines are necessary in order to match the drive characteristics with the characteristics of the array for efficient utilization of the resource. This paper proposes a model ... Keywords: MATLAB/SIMULINK modeling, electric machines, photovoltaic array, power electronics, simulation

S. Arul Daniel; N. Ammasai Gounden

2010-11-01T23:59:59.000Z

82

Utilizing cable winding and industrial robots to facilitate the manufacturing of electric machines  

Science Conference Proceedings (OSTI)

Cable wound electric machines are used mainly for high voltage and direct-drive applications. They can be found in areas such as wind power, hydropower, wave power and high-voltage motors. Compared to conventional winding techniques, cable winding includes ... Keywords: Automated production, Electric machine assembly, Industrial robot, Powerformer, Stator winding, Wave energy converter

Erik Hultman; Mats Leijon

2013-02-01T23:59:59.000Z

83

Ensemble modeling of transport and dispersion simulations guided by machine learning hypotheses generation  

Science Conference Proceedings (OSTI)

In this article an approach is presented where machine learning classifiers are used to drive an ensemble modeling method of multiple atmospheric transport and dispersion simulations. The goal is to achieve a higher spread of the results with a lower ... Keywords: Ensemble modeling, Machine learning, Transport and dispersion simulations

Andreas D. Lattner; Guido Cervone

2012-11-01T23:59:59.000Z

84

School supply drive winding down  

NLE Websites -- All DOE Office Websites (Extended Search)

submit School supply drive winding down The drive is collecting materials for schools throughout Northern New Mexico and will be distributed by the Lab and Self Help, Inc....

85

Electric Drive Status and Challenges  

NLE Websites -- All DOE Office Websites (Extended Search)

to Achieve Traction Drive Cost Target * Inverter: cold plate, drive boards, thermal interface material, bus bar, current sensors, housing, control board, etc. Motor:...

86

Stirling machine operating experience  

Science Conference Proceedings (OSTI)

Numerous Stirling machines have been built and operated, but the operating experience of these machines is not well known. It is important to examine this operating experience in detail, because it largely substantiates the claim that stirling machines are capable of reliable and lengthy operating lives. The amount of data that exists is impressive, considering that many of the machines that have been built are developmental machines intended to show proof of concept, and are not expected to operate for lengthy periods of time. Some Stirling machines (typically free-piston machines) achieve long life through non-contact bearings, while other Stirling machines (typically kinematic) have achieved long operating lives through regular seal and bearing replacements. In addition to engine and system testing, life testing of critical components is also considered. The record in this paper is not complete, due to the reluctance of some organizations to release operational data and because several organizations were not contacted. The authors intend to repeat this assessment in three years, hoping for even greater participation.

Ross, B. [Stirling Technology Co., Richland, WA (United States); Dudenhoefer, J.E. [Lewis Research Center, Cleveland, OH (United States)

1994-09-01T23:59:59.000Z

87

Methods, systems and apparatus for synchronous current regulation of a five-phase machine  

DOE Patents (OSTI)

Methods, systems and apparatus are provided for controlling operation of and regulating current provided to a five-phase machine when one or more phases has experienced a fault or has failed. In one implementation, the disclosed embodiments can be used to synchronously regulate current in a vector controlled motor drive system that includes a five-phase AC machine, a five-phase inverter module coupled to the five-phase AC machine, and a synchronous current regulator.

Gallegos-Lopez, Gabriel; Perisic, Milun

2012-10-09T23:59:59.000Z

88

Electrochemical Energy Storage for the Grid | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electrochemical Energy Storage for the Grid Electrochemical Energy Storage for the Grid Electrochemical Energy Storage for the Grid Electrochemical Energy Storage for the Grid More...

89

Electrochemical removal of material from metallic work  

DOE Patents (OSTI)

Deburring, polishing, surface forming and the like are carried out by electrochemical machining with conformable electrode means including an electrically conducting and an insulating web. The surface of the work to be processed is covered by a deformable electrically insulating web or cloth which is perforated and conforms with the work. The web is covered by a deformable perforated electrically conducting screen electrode which also conforms with, and is insulated from, the work by the insulating web. An electrolyte is conducted through the electrode and insulating web and along the work through a perforated elastic member which engages the electrode under pressure pressing the electrode and web against the work. High current under low voltage is conducted betwen the electrode and work through the insulator, removing material from the work. Under the pressure of the elastic member, the electrode and insulator continue to conform with the work and the spacing between the electrode and work is maintained constant.

Csakvary, Tibor (Wilkens Township, Allegheny County, PA); Fromson, Robert E. (Wilkens Township, Allegheny County, PA)

1980-05-13T23:59:59.000Z

90

Ceramic vane drive joint  

SciTech Connect

A variable geometry gas turbine has an array of ceramic composition vanes positioned by an actuating ring coupled through a plurality of circumferentially spaced turbine vane levers to the outer end of a metallic vane drive shaft at each of the ceramic vanes. Each of the ceramic vanes has an end slot of bow tie configuration including flared end segments and a center slot therebetween. Each of the vane drive shafts has a cross head with ends thereof spaced with respect to the sides of the end slot to define clearance for free expansion of the cross head with respect to the vane and the cross head being configured to uniformly distribute drive loads across bearing surfaces of the vane slot.

Smale, Charles H. (Indianapolis, IN)

1981-01-01T23:59:59.000Z

91

Vehicle Technologies Office: Electrical Machines  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrical Machines Emphasis in the electrical machines activity is on advanced motor technologies, performance, low-cost materials, and thermal control systems that will yield...

92

LCLS Injector Drive Laser  

SciTech Connect

Requirements for the LCLS injector drive laser present significant challenges to the design of the system. While progress has been demonstrated in spatial shape, temporal shape, UV generation and rep-rate, a laser that meets all of the LCLS specifications simultaneously has yet to be demonstrated. These challenges are compounded by the stability and reliability requirements. The drive laser and transport system has been installed and tested. We will report on the current operational state of the laser and plans for future improvements.

Dowell, D.H.; Castro, J.; Emma, P.; Frisch, J.; Gilevich, A.; Hays, G.; Hering, P.; Limborg-Deprey, C.; Loos, H.; Miahnahri, A.; White, W.; /SLAC

2007-11-02T23:59:59.000Z

93

CONTROL ROD DRIVE  

DOE Patents (OSTI)

Accurate and controlled drive for the control rod is from an electric motor. A hydraulic arrangement is provided to balance a piston against which a control rod is urged by the application of fluid pressure. The electric motor drive of the control rod for normal operation is made through the aforementioned piston. In the event scramming is required, the fluid pressure urging the control rod against the piston is relieved and an opposite fluid pressure is applied. The lack of mechanical connection between the electric motor and control rod facilitates the scramming operation.

Chapellier, R.A.; Rogers, I.

1961-06-27T23:59:59.000Z

94

Remote electrochemical sensor  

DOE Patents (OSTI)

An electrochemical sensor for remote detection, particularly useful for metal contaminants and organic or other compounds. The sensor circumvents technical difficulties that previously prevented in-situ remote operations. The microelectrode, connected to a long communications cable, allows convenient measurements of the element or compound at timed and frequent intervals and instrument/sample distances of ten feet to more than 100 feet. The sensor is useful for both downhole groundwater monitoring and in-situ water (e.g., shipboard seawater) analysis.

Wang, Joseph (Las Cruces, NM); Olsen, Khris (Richland, WA); Larson, David (Las Cruces, NM)

1997-01-01T23:59:59.000Z

95

Drive5 | Open Energy Information  

Open Energy Info (EERE)

Drive5 Drive5 Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Drive5 Agency/Company /Organization: Drive5 Sector: Energy Focus Area: Vehicles Resource Type: Software/modeling tools User Interface: Website, Mobile Device Website: www.drive5.us Web Application Link: www.drive5.us Cost: Free OpenEI Keyword(s): Challenge Generated Drive5 Screenshot References: Drive5[1] Challenge.gov[2] Challenge.gov Submission Page[3] Measure your fuel economy real time with five metrics to save on fuel costs. Overview Drive1: Fuel Economy Drive5 gives you real time fuel economy feedback for any car 1984 and newer by simply utilizing the sensors embedded in your phone or tablet. It uses a statistical algorithm which leverages the fueleconomy.gov's open dataset along with data from thousands of automobile trips. No connections to the

96

Electrochemical Energy Storage and Conversion  

Science Conference Proceedings (OSTI)

Mar 4, 2013 ... Design and Discovery of Novel Energy Materials: Stephan Lany1; 1NREL ... determine and characterise the state of an electrochemical system, ...

97

Human-machine interactions  

DOE Patents (OSTI)

Digital technology utilizing a cognitive model based on human naturalistic decision-making processes, including pattern recognition and episodic memory, can reduce the dependency of human-machine interactions on the abilities of a human user and can enable a machine to more closely emulate human-like responses. Such a cognitive model can enable digital technology to use cognitive capacities fundamental to human-like communication and cooperation to interact with humans.

Forsythe, J. Chris (Sandia Park, NM); Xavier, Patrick G. (Albuquerque, NM); Abbott, Robert G. (Albuquerque, NM); Brannon, Nathan G. (Albuquerque, NM); Bernard, Michael L. (Tijeras, NM); Speed, Ann E. (Albuquerque, NM)

2009-04-28T23:59:59.000Z

98

Quasi-spherical direct drive fusion.  

SciTech Connect

The authors present designs of quasi-spherical direction drive z-pinch loads for machines such as ZR at 28 MA load current with a 150 ns implosion time (QSDDI). A double shell system for ZR has produced a 2D simulated yield of 12 MJ, but the drive for this system on ZR has essentially no margin. A double shell system for a 56 MA driver at 150 ns implosion has produced a simulated yield of 130 MJ with considerable margin in attaining the necessary temperature and density-radius product for ignition. They also represent designs for a magnetically insulated current amplifier, (MICA), that modify the attainable ZR load current to 36 MA with a 28 ns rise time. The faster pulse provided by a MICA makes it possible to drive quasi-spherical single shell implosions (QSDD2). They present results from 1D LASNEX and 2D MACH2 simulations of promising low-adiabat cryogenic QSDD2 capsules and 1D LASNEX results of high-adiabat cryogenic QSDD2 capsules.

VanDevender, J. Pace; Abbott, Lucas M.; Langston, William L.; McDaniel, Dillon Heirman; Nash, Thomas J.; Roderick, Norman Frederick; Silva, M.

2007-01-01T23:59:59.000Z

99

Electrochemical Apparatus with Disposable and Modifiable Parts  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrochemical Apparatus with Disposable and Modifiable Parts Electrochemical Apparatus with Disposable and Modifiable Parts Electrochemical Apparatus with Disposable and Modifiable Parts The invention also includes electrochemical apparatus that can interface with optical instrumentation. If the working electrode is transparent, light from an optical fiber may be directed through the working electrode and into a cuvette. July 3, 2013 Electrochemical Apparatus with Disposable and Modifiable Parts Available for thumbnail of Feynman Center (505) 665-9090 Email Electrochemical Apparatus with Disposable and Modifiable Parts Applications: Electrochemical experiments in solution Electrochemical experiments on surfaces Bulk electrolysis experiments Fuel cells Corrosion studies Academic Labs Teaching and research Benefits: Incorporates disposable, commercially available cuvettes

100

Electrochemical Characterization Laboratory (Fact Sheet), NREL...  

NLE Websites -- All DOE Office Websites (Extended Search)

The research focus at the Electrochemical Characterization Laboratory at NREL's Energy Systems Integration Facility (ESIF) is evaluating the electrochemical properties of novel...

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Asymptotic analysis of extreme electrochemical transport  

E-Print Network (OSTI)

In the study of electrochemical transport processes, experimental exploration currently outpaces theoretical understanding of new phenomena. Classical electrochemical transport theory is not equipped to explain the behavior ...

Chu, Kevin Taylor

2005-01-01T23:59:59.000Z

102

Electrochemical thinning of silicon  

DOE Patents (OSTI)

Porous semiconducting material, e.g. silicon, is formed by electrochemical treatment of a specimen in hydrofluoric acid, using the specimen as anode. Before the treatment, the specimen can be masked. The porous material is then etched with a caustic solution or is oxidized, depending of the kind of structure desired, e.g. a thinned specimen, a specimen, a patterned thinned specimen, a specimen with insulated electrical conduits, and so on. Thinned silicon specimen can be subjected to tests, such as measurement of interstitial oxygen by Fourier transform infra-red spectroscopy (FTIR). 14 figures.

Medernach, J.W.

1994-01-11T23:59:59.000Z

103

Remote electrochemical sensor  

DOE Patents (OSTI)

An electrochemical sensor is described for remote detection, particularly useful for metal contaminants and organic or other compounds. The sensor circumvents technical difficulties that previously prevented in-situ remote operations. The microelectrode, connected to a long communications cable, allows convenient measurements of the element or compound at timed and frequent intervals and instrument/sample distances of ten feet to more than 100 feet. The sensor is useful for both downhole groundwater monitoring and in-situ water (e.g., shipboard seawater) analysis. 21 figs.

Wang, J.; Olsen, K.; Larson, D.

1997-10-14T23:59:59.000Z

104

Chinese demand drives global deforestation Chinese demand drives global deforestation  

E-Print Network (OSTI)

Chinese demand drives global deforestation Chinese demand drives global deforestation By Tansa Musa zones and do not respect size limits in their quest for maximum financial returns. "I lack words economy. China's demand for hardwood drives illegal logging says "Both illegal and authorized

105

Electrochemical Characterization Laboratory (Fact Sheet)  

Science Conference Proceedings (OSTI)

This fact sheet describes the purpose, lab specifications, applications scenarios, and information on how to partner with NREL's Electrochemical Characterization Laboratory at the Energy Systems Integration Facility. The research focus at the Electrochemical Characterization Laboratory at NREL's Energy Systems Integration Facility (ESIF) is evaluating the electrochemical properties of novel materials synthesized by various techniques and understanding and delineating the reaction mechanisms to provide practical solutions to PEMFCs commercialization issues of cost, performance and durability. It is also involved in the development of new tools and techniques for electrochemical characterization. The laboratory concentrates on the development and characterization of new materials for PEMFCs such as electrocatalysts, catalyst supports in terms of electrochemical activity, electrochemical surface area and corrosion/durability. The impact of impurities and/or contaminants on the catalyst activity is also under study. Experiments that can be performed include: (1) Determination and benchmarking of novel electrocatalyst activity; (2) Determination of electrochemical surface area; (3) Determination of electrocatalyst and support corrosion resistance and durability; (4) Synthesis and characterization of novel electrocatalyst; (5) Determination of fundamental electrochemical parameters; and (6) Estimation of electrocatalyst utilization.

Not Available

2011-10-01T23:59:59.000Z

106

Electrochemical Capacitors for Utility Applications  

Science Conference Proceedings (OSTI)

Electrochemical capacitors have over 100 times the energy density of conventional electrolytic capacitors, while retaining the high-power, high-life-cycle properties of conventional capacitors. This report presents a summary of the technical trends, commercialization status, and feasibility of electrochemical capacitor (ECC) technology in utility applications.

2005-08-31T23:59:59.000Z

107

Electrochemical photovoltaic cells and electrodes  

DOE Patents (OSTI)

Improved electrochemical photovoltaic cells and electrodes for use therein, particularly electrodes employing amorphous silicon or polyacetylene coating are produced by a process which includes filling pinholes or porous openings in the coatings by electrochemical oxidation of selected monomers to deposit insulating polymer in the openings.

Skotheim, Terje A. (East Patchogue, NY)

1984-01-01T23:59:59.000Z

108

BCDA Machine Status Link  

NLE Websites -- All DOE Office Websites (Extended Search)

Machine Status Link Machine Status Link Version 1.33 (December 2005) David M. Kline. The Machine Status Link (MSL) is responsible for distributing the digitized beam current, injection status, P0 clock, and other statuses over a single fiber to several locations around the Storage Ring. The MRD100 is a VME-based module that is part of the MSL and was specifically designed for the APS. It receives and interprets information from the XMS100 module by means of copper or fiber. Signals from the XMS100 module are sent at a P0 rate (3.667 microseconds). It sends two registers every cycle and all in about 12 cycles. Refer to the ASD website for additional information regarding the MSL. The focus of this page is to provide information of how to configure the MRD100 for a beamline IOC and to discuss the sample IOC

109

Automated fiber pigtailing machine  

DOE Patents (OSTI)

The Automated Fiber Pigtailing Machine (AFPM) aligns and attaches optical fibers to optoelectronic (OE) devices such as laser diodes, photodiodes, and waveguide devices without operator intervention. The so-called pigtailing process is completed with sub-micron accuracies in less than 3 minutes. The AFPM operates unattended for one hour, is modular in design and is compatible with a mass production manufacturing environment. This machine can be used to build components which are used in military aircraft navigation systems, computer systems, communications systems and in the construction of diagnostics and experimental systems. 26 figs.

Strand, O.T.; Lowry, M.E.

1999-01-05T23:59:59.000Z

110

Electrochemical sensor for monitoring electrochemical potentials of fuel cell components  

DOE Patents (OSTI)

An electrochemical sensor comprised of wires, a sheath, and a conduit can be utilized to monitor fuel cell component electric potentials during fuel cell shut down or steady state. The electrochemical sensor contacts an electrolyte reservoir plate such that the conduit wicks electrolyte through capillary action to the wires to provide water necessary for the electrolysis reaction which occurs thereon. A voltage is applied across the wires of the electrochemical sensor until hydrogen evolution occurs at the surface of one of the wires, thereby forming a hydrogen reference electrode. The voltage of the fuel cell component is then determined with relation to the hydrogen reference electrode.

Kunz, Harold R. (Vernon, CT); Breault, Richard D. (Coventry, CT)

1993-01-01T23:59:59.000Z

111

Fast wave current drive system design for DIII-D  

SciTech Connect

DIII-D has a major effort underway to develop the physics and technology of fast wave electron heating and current drive in conjunction with electron cyclotron heating. The present system consists of a four strap antenna driven by one 2 MW transmitter in the 32--60 MHz band. Experiments have been successful in demonstrating the physics of heating and current drive. In order to validate fast wave current drive for future machines a greater power capability is necessary to drive all of the plasma current. Advanced tokamak modeling for DIII-D has indicated that this goal can be met for plasma configurations of interest (i.e. high [beta] VH-mode discharges) with 8 MW of transmitter fast wave capability. It is proposed that four transmitters drive fast wave antennas at three locations in DIII-D to provide the power for current drive and current profile modification. As the next step in acquiring this capability, two modular four strap antennas are in design and the procurement of a high power transmitter in the 30--120 MHz range is in progress. Additionally, innovations in the technology are being investigated, such as the use of a coupled combine antenna to reduce the number of required feedthroughs and to provide for parallel phase velocity variation with a relatively small change in frequency, and the use of fast ferrite tuners to provide millisecond timescale impedance matching. A successful test of a low power fast ferrite prototype was conducted on DIII-D.

deGrassie, J.S.; Callis, R.; Lin-Liu, Y.R.; Moeller, C..; Petty, C.C.; Phelps, D.R.; Pinsker, R.I.; Remsen, D. (General Atomics, San Diego, CA (United States)); Baity, F.W.; Hoffman, D.J.; Taylor, D.J. (Oak Ridge National Lab., TN (United States)); Arnold, W.; Martin, S. (ANT-Nachrichtentechnik GmbH, Backnang (Germany))

1992-09-01T23:59:59.000Z

112

Fast wave current drive system design for DIII-D  

SciTech Connect

DIII-D has a major effort underway to develop the physics and technology of fast wave electron heating and current drive in conjunction with electron cyclotron heating. The present system consists of a four strap antenna driven by one 2 MW transmitter in the 32--60 MHz band. Experiments have been successful in demonstrating the physics of heating and current drive. In order to validate fast wave current drive for future machines a greater power capability is necessary to drive all of the plasma current. Advanced tokamak modeling for DIII-D has indicated that this goal can be met for plasma configurations of interest (i.e. high {beta} VH-mode discharges) with 8 MW of transmitter fast wave capability. It is proposed that four transmitters drive fast wave antennas at three locations in DIII-D to provide the power for current drive and current profile modification. As the next step in acquiring this capability, two modular four strap antennas are in design and the procurement of a high power transmitter in the 30--120 MHz range is in progress. Additionally, innovations in the technology are being investigated, such as the use of a coupled combine antenna to reduce the number of required feedthroughs and to provide for parallel phase velocity variation with a relatively small change in frequency, and the use of fast ferrite tuners to provide millisecond timescale impedance matching. A successful test of a low power fast ferrite prototype was conducted on DIII-D.

deGrassie, J.S.; Callis, R.; Lin-Liu, Y.R.; Moeller, C..; Petty, C.C.; Phelps, D.R.; Pinsker, R.I.; Remsen, D. [General Atomics, San Diego, CA (United States); Baity, F.W.; Hoffman, D.J.; Taylor, D.J. [Oak Ridge National Lab., TN (United States); Arnold, W.; Martin, S. [ANT-Nachrichtentechnik GmbH, Backnang (Germany)

1992-09-01T23:59:59.000Z

113

Positional reference system for ultraprecision machining  

DOE Patents (OSTI)

A stable positional reference system for use in improving the cutting tool-to-part contour position in numerical controlled-multiaxis metal turning machines is provided. The reference system employs a plurality of interferometers referenced to orthogonally disposed metering bars which are substantially isolated from machine strain induced position errors for monitoring the part and tool positions relative to the metering bars. A microprocessor-based control system is employed in conjunction with the plurality of position interferometers and part contour description data inputs to calculate error components for each axis of movement and output them to corresponding axis drives with appropriate scaling and error compensation. Real-time position control, operating in combination with the reference system, makes possible the positioning of the cutting points of a tool along a part locus with a substantially greater degree of accuracy than has been attained previously in the art by referencing and then monitoring only the tool motion relative to a reference position located on the machine base.

Arnold, Jones B. (Knoxville, TN); Burleson, Robert R. (Clinton, TN); Pardue, Robert M. (Knoxville, TN)

1982-01-01T23:59:59.000Z

114

Gas Mileage Tips - Driving More Efficiently  

NLE Websites -- All DOE Office Websites (Extended Search)

Driving More Efficiently Drive Sensibly frustrated driver Aggressive driving (speeding, rapid acceleration and braking) wastes gas. It can lower your gas mileage by 33 percent at...

115

Methods, systems and apparatus for optimization of third harmonic current injection in a multi-phase machine  

DOE Patents (OSTI)

Methods, system and apparatus are provided for increasing voltage utilization in a five-phase vector controlled machine drive system that employs third harmonic current injection to increase torque and power output by a five-phase machine. To do so, a fundamental current angle of a fundamental current vector is optimized for each particular torque-speed of operating point of the five-phase machine.

Gallegos-Lopez, Gabriel

2012-10-02T23:59:59.000Z

116

Operating the Lisp Machine  

E-Print Network (OSTI)

This document is a draft copy of a portion of the Lisp Machine window system manual. It is being published in this form now to make it available, since the complete window system manual is unlikely to be finished in the ...

Moon, David A.

117

Scalable formal machine models  

Science Conference Proceedings (OSTI)

In the past few years, we have seen machine-checked proofs of relatively large software systems, including compilers and micro-kernels. But like all formal arguments, the assurance gained by these mechanical proofs is only as good as the models we construct ...

Greg Morrisett

2012-12-01T23:59:59.000Z

118

Laser machining of explosives  

DOE Patents (OSTI)

The invention consists of a method for machining (cutting, drilling, sculpting) of explosives (e.g., TNT, TATB, PETN, RDX, etc.). By using pulses of a duration in the range of 5 femtoseconds to 50 picoseconds, extremely precise and rapid machining can be achieved with essentially no heat or shock affected zone. In this method, material is removed by a nonthermal mechanism. A combination of multiphoton and collisional ionization creates a critical density plasma in a time scale much shorter than electron kinetic energy is transferred to the lattice. The resulting plasma is far from thermal equilibrium. The material is in essence converted from its initial solid-state directly into a fully ionized plasma on a time scale too short for thermal equilibrium to be established with the lattice. As a result, there is negligible heat conduction beyond the region removed resulting in negligible thermal stress or shock to the material beyond a few microns from the laser machined surface. Hydrodynamic expansion of the plasma eliminates the need for any ancillary techniques to remove material and produces extremely high quality machined surfaces. There is no detonation or deflagration of the explosive in the process and the material which is removed is rendered inert.

Perry, Michael D. (Livermore, CA); Stuart, Brent C. (Fremont, CA); Banks, Paul S. (Livermore, CA); Myers, Booth R. (Livermore, CA); Sefcik, Joseph A. (Tracy, CA)

2000-01-01T23:59:59.000Z

119

Logically Possible Machines  

Science Conference Proceedings (OSTI)

I use modal logic and transfinite set-theory to define metaphysical foundations for a general theory of computation. A possible universe is a certain kind of situation; a situation is a set of facts. An algorithm is a certain kind of inductively defined ... Keywords: convergence, fixed-point, infinite algorithm, infinite machine, infinite mind, limit, possible world, situation, super-Turing computer

Eric Steinhart

2002-05-01T23:59:59.000Z

120

Electrochemical Hydrogen Compression (EHC)  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrochemical Hydrogen Compression (EHC) Pinakin Patel and Ludwig Lipp Presentation at DOE Hydrogen Compression, Storage and Dispensing Workshop at ANL Argonne, IL March 20, 2013 2 * Experience with all fuel cells - MCFC, SOFC, PEM, PAFC, etc. * Excellent progress in commercialization of MCFC technology (>300 MW installed + backlog, >50 MW per year production rate, 11 MW single site unit in Korea, >1.5 billion kWh produced) * Unique internal reforming technology for high efficiency fuel cells FCE Overview $- $2,000 $4,000 $6,000 $8,000 $10,000 2003 2007 2011 mid-term Product cost per kW 3 H 2 Peak and Back- up Power Fuel Cell Cars DFC ® Power Plant (Electricity + Hydrogen) Solid State Hydrogen Separator (EHS) Solid State Hydrogen

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Electrochemical catalyst recovery method  

DOE Patents (OSTI)

A method of recovering catalyst material from latent catalyst material solids includes: a) combining latent catalyst material solids with a liquid acid anolyte solution and a redox material which is soluble in the acid anolyte solution to form a mixture; b) electrochemically oxidizing the redox material within the mixture into a dissolved oxidant, the oxidant having a potential for oxidation which is effectively higher than that of the latent catalyst material; c) reacting the oxidant with the latent catalyst material to oxidize the latent catalyst material into at least one oxidized catalyst species which is soluble within the mixture and to reduce the oxidant back into dissolved redox material; and d) recovering catalyst material from the oxidized catalyst species of the mixture. The invention is expected to be particularly useful in recovering spent catalyst material from petroleum hydroprocessing reaction waste products having adhered sulfides, carbon, hydrocarbons, and undesired metals, and as well as in other industrial applications.

Silva, Laura J. (Richland, WA); Bray, Lane A. (Richland, WA)

1995-01-01T23:59:59.000Z

122

Electrochemical catalyst recovery method  

DOE Patents (OSTI)

A method of recovering catalyst material from latent catalyst material solids includes: (a) combining latent catalyst material solids with a liquid acid anolyte solution and a redox material which is soluble in the acid anolyte solution to form a mixture; (b) electrochemically oxidizing the redox material within the mixture into a dissolved oxidant, the oxidant having a potential for oxidation which is effectively higher than that of the latent catalyst material; (c) reacting the oxidant with the latent catalyst material to oxidize the latent catalyst material into at least one oxidized catalyst species which is soluble within the mixture and to reduce the oxidant back into dissolved redox material; and (d) recovering catalyst material from the oxidized catalyst species of the mixture. The invention is expected to be particularly useful in recovering spent catalyst material from petroleum hydroprocessing reaction waste products having adhered sulfides, carbon, hydrocarbons, and undesired metals, and as well as in other industrial applications. 3 figs.

Silva, L.J.; Bray, L.A.

1995-05-30T23:59:59.000Z

123

Renewable-reagent electrochemical sensor  

DOE Patents (OSTI)

A new electrochemical probe(s) design allowing for continuous (renewable) reagent delivery. The probe comprises an integrated membrane-sampling/electrochemical sensor that prevents interferences from surface-active materials and greatly extends the linear range. The probe(s) is useful for remote or laboratory-based monitoring in connection with microdialysis sampling and electrochemical measurements of metals and organic compounds that are not readily detected in the absence of reacting with the compound. Also disclosed is a method of using the probe(s).

Wang, Joseph (Las Cruces, NM); Olsen, Khris B. (Richland, WA)

1999-01-01T23:59:59.000Z

124

Renewable-reagent electrochemical sensor  

DOE Patents (OSTI)

A new electrochemical probe(s) design allowing for continuous (renewable) reagent delivery is described. The probe comprises an integrated membrane sampling/electrochemical sensor that prevents interferences from surface-active materials and greatly extends the linear range. The probe(s) is useful for remote or laboratory-based monitoring in connection with microdialysis sampling and electrochemical measurements of metals and organic compounds that are not readily detected in the absence of reacting with the compound. Also disclosed is a method of using the probe(s). 19 figs.

Wang, J.; Olsen, K.B.

1999-08-24T23:59:59.000Z

125

Process for electrochemically gasifying coal  

DOE Patents (OSTI)

A process is claimed for electrochemically gasifying coal by establishing a flowing stream of coal particulate slurry, electrolyte and electrode members through a transverse magnetic field that has sufficient strength to polarize the electrode members, thereby causing them to operate in combination with the electrolyte to electrochemically reduce the coal particulate in the slurry. Such electrochemical reduction of the coal produces hydrogen and carbon dioxide at opposite ends of the polarized electrode members. Gas collection means are operated in conjunction with the process to collect the evolved gases as they rise from the slurry and electrolyte solution. 7 figs.

Botts, T.E.; Powell, J.R.

1985-10-25T23:59:59.000Z

126

NREL: Vehicles and Fuels Research - DRIVE: Drive-Cycle Rapid...  

NLE Websites -- All DOE Office Websites (Extended Search)

representative drive cycles from raw data, the tool is capable of comparing vehicle operation to industry standard test cycles and can even select a representative...

127

Coded output support vector machine  

Science Conference Proceedings (OSTI)

The authors propose a coded output support vector machine (COSVM) by introducing the idea of information coding to solve multi-class classification problems for large-scale datasets. The COSVM is built based on the support vector regression (SVR) machine ... Keywords: coded output, multi-class classification, number system, parallel implementation, support vector machine (SVM)

Tao Ye; Xuefeng Zhu

2012-07-01T23:59:59.000Z

128

Data envelopment analysis classification machine  

Science Conference Proceedings (OSTI)

This paper establishes the equivalent relationship between the data classification machine and the data envelopment analysis (DEA) model, and thus build up a DEA based classification machine. A data is characterized by a set of values. Without loss of ... Keywords: Classification machine, Data envelopment analysis, Preference cone

Hong Yan; Quanling Wei

2011-11-01T23:59:59.000Z

129

Supported liquid membrane electrochemical separators  

DOE Patents (OSTI)

Supported liquid membrane separators improve the flexibility, efficiency and service life of electrochemical cells for a variety of applications. In the field of electrochemical storage, an alkaline secondary battery with improved service life is described in which a supported liquid membrane is interposed between the positive and negative electrodes. The supported liquid membranes of this invention can be used in energy production and storage systems, electrosynthesis systems, and in systems for the electrowinning and electrorefining of metals.

Pemsler, J. Paul (Lexington, MA); Dempsey, Michael D. (Revere, MA)

1986-01-01T23:59:59.000Z

130

Rotary drive mechanism  

Science Conference Proceedings (OSTI)

This patent describes a rotary drive mechanism which includes a rotary solenoid having a stator and multi-poled rotor. A moving member rotates with the rotor and is biased by a biasing device. The biasing device causes a further rotational movement after rotation by the rotary solenoid. Thus, energization of the rotary solenoid moves the member in one direction to one position and biases the biasing device against the member. Subsequently, de- energization of the rotary solenoid causes the biasing device to move the member in the same direction to another position from where the moving member is again movable by energization and de-energization of the rotary solenoid. Preferably, the moving member is a multi-lobed cam having the same number of lobes as the rotor has poles. An anti- overdrive device is also preferably provided for preventing overdrive in the forward direction or a reverse rotation of the moving member and for precisely aligning the moving member.

Kenderdine, E.W.

1991-10-08T23:59:59.000Z

131

Rotary drive mechanism  

Science Conference Proceedings (OSTI)

A rotary drive mechanism includes a rotary solenoid having a stator and multi-poled rotor. A moving member rotates with the rotor and is biased by a biasing device. The biasing device causes a further rotational movement after rotation by the rotary solenoid. Thus, energization of the rotary solenoid moves the member in one direction to one position and biases the biasing device against the member. Subsequently, de-energization of the rotary solenoid causes the biasing device to move the member in the same direction to another position from where the moving member is again movable by energization and de-energization of the rotary solenoid. Preferably, the moving member is a multi-lobed cam having the same number of lobes as the rotor has poles. An anti-overdrive device is also preferably provided for preventing overdrive in the forward direction or a reverse rotation of the moving member and for precisely aligning the moving member.

Kenderdine, Eugene W. (Albuquerque, NM)

1991-01-01T23:59:59.000Z

132

QUICK RELEASABLE DRIVE  

DOE Patents (OSTI)

A quick releasable mechanical drive system suitable for use in a nuclear reactor is described. A small reversible motor positions a control rod by means of a worm and gear speed reducer, a magnetic torque clutch, and a bell crank. As the control rod is raised to the operating position, a heavy coil spring is compressed. In the event of an emergency indicated by either a''scram'' signal or a power failure, the current to the magnetic clutch is cut off, thereby freeing the coil spring and the bell crank positioner from the motor and speed reduction gearing. The coil spring will immediately act upon the bell crank to cause the insertion of the control rod. This arrangement will allow the slow, accurate positioning of the control rod during reactor operation, while providing an independent force to rapidly insert the rod in the event of an emergency.

Dickson, J.J.

1958-07-01T23:59:59.000Z

133

International Business Machines Corporation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Business Machines Corporation Business Machines Corporation Thomas J. Watson Research Center 1101 Kitchawan Road, NY 10598 Office of the Assistant General Counsel for Technology Transfer and Intellectual Property U.S. Department of Energy 1000 Independence Ave, SW, Washington DC 20585 ATTN: TECHNOLOGY TRANSFER QUESTIONS Sent electronically to GC-62@hq.doe.gov RE: Questions Concerning Technology Transfer Practices at DOE Laboratories Federal Register, Vol. 73, No. 229 Dear Mr. Gottlieb: IBM Corporation appreciates the opportunity to provide comments in response to the Department of Energy notice of inquiry. DOE Laboratories are a fundamental resource to government, industry, academia and the economy as a whole. All can benefit from efficient contracting processes and

134

Hydrogen--electric power drives  

SciTech Connect

Hydrogen--electric power drives would consist of most or all of these: chilled hydrogen gas tank, liquid oxygen tank, a bank of fuel cells, dc/ac inverter, ac drive motors, solid state ac speed control, dc sputter-ion vacuum pumps, steam turbine generator set and steam condenser. Each component is described. Optional uses of low pressure extraction steam and warm condensate are listed. Power drive applications are listed. Impact on public utilities, fuel suppliers, and users is discussed.

Hall, F.F.

1978-10-01T23:59:59.000Z

135

Control system for an interior permanent magnet synchronous machine  

DOE Patents (OSTI)

A high performance, fully operational, four-quadrant control scheme is used in an interior permanent magnet synchronous machine. The machine operates smoothly with full performance in the constant-torque region as well as in the flux-weakening, constant-power region in both directions of motion. The transition between the constant-torque and constant-power regions is very smooth under all conditions of operation. Control in the constant-torque region is based on a vector or field-oriented technique, with the direct-axis aligned with the total stator flux, whereas constant-power region control is accomplished by orientation of the torque angle of the impressed square-wave voltage through the feedforward vector rotator. In a preferred embodiment, the control system employs a digital distributed microcomputer controller arrangement which relies upon various precisely estimated feedback signals, such as torque, flux, etc. The control scheme includes an outer torque control loop primarily for traction type applications, but also contemplates speed and position control loops for various industrial drives. A 70 hp drive system using a Neodymium-Iron-Boron permanent magnet machine and transistor pulse width modulating inverter has been designed and successfully tested. This control scheme also has application in controlling surface permanent magnet machines. 16 figs.

Bose, B.K.

1988-10-12T23:59:59.000Z

136

Electrochemical polishing of notches  

DOE Patents (OSTI)

An apparatus and method are disclosed for the selective electrochemical polishing of a lateral tip of a deep longitudinal notch in a work piece used to test crack initiation properties of materials. A DC power source is connected to the work piece and to an electrode disposed laterally along the distal end of an insulated body which is inserted in the longitudinal notch. The electrode and distal end of the body are disposed along the tip of the notch, but are spaced from the notch so as to provide a lateral passage for an electrolyte. The electrolyte is circulated through the passage so that the electrolyte only contacts the work piece adjacent the passage. Conveniently, the electrolyte is circulated by use of an inlet tube and an outlet tube provided at opposite ends of the passage. These tubes are preferably detachably located adjacent the ends of the passage and suitable seals are provided. A holding device including arms to which the tubes are attached is conveniently used to rapidly and easily locate the test specimen with the passage aligned with the tubes. The electrode is preferably a wire which is located in grooves along the distal end of the insulated body and up one side of the body or a plastic sheath insulated thin metal strip. 4 figs.

Kephart, A.R.; Alberts, A.H.

1989-02-21T23:59:59.000Z

137

Zelenay wins Electrochemical Society's Research Award  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrochemical Society's Research Award Electrochemical Society's Research Award Zelenay wins Electrochemical Society's Research Award The award includes a monetary prize and membership in the Electrochemical Society's Energy Technology Division. December 11, 2012 Piotr Zelenay Piotr Zelenay The award recognizes Zelenay's "outstanding and original contributions to the science and technology of energy-related research areas that include scientific and technological aspects of fossil fuels and alternative energy sources, energy management and environmental consequences of energy utilization." Piotr Zelenay of LANL's Sensors and Electrochemical Devices group has won the 2012 Research Award presented by the Energy Technology Division of The Electrochemical Society. The award recognizes Zelenay's "outstanding

138

Intelligent Energy Management Based on the Driving Cycle Sensitivity Identification Using SVM  

Science Conference Proceedings (OSTI)

Hybrid Electric Vehicles (HEV) offer the ability to significantly reduce fuel consumptions and emission. Management of energy is one of essential elements in the implementation of hybrid electric vehicles. Engine and motor should satisfy the driver’s ... Keywords: driving cycle sensitivity, support vector machine, control strategy, genetic

Zhang Liang; Zhang Xin; Tian Yi; Zhang Xinn

2009-12-01T23:59:59.000Z

139

Electrochem Inc | Open Energy Information  

Open Energy Info (EERE)

Electrochem Inc Electrochem Inc Jump to: navigation, search Name Electrochem Inc Address 400 W. Cummings Park Place Woburn, Massachusetts Zip 01801 Sector Hydrogen Product Fuel cell hardware and testing equipment Website http://fuelcell.com/ Coordinates 42.4964246°, -71.1263367° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.4964246,"lon":-71.1263367,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

140

Automatic tool path generation for finish machining  

SciTech Connect

A system for automatic tool path generation was developed at Sandia National Laboratories for finish machining operations. The system consists of a commercially available 5-axis milling machine controlled by Sandia developed software. This system was used to remove overspray on cast turbine blades. A laser-based, structured-light sensor, mounted on a tool holder, is used to collect 3D data points around the surface of the turbine blade. Using the digitized model of the blade, a tool path is generated which will drive a 0.375 inch diameter CBN grinding pin around the tip of the blade. A fuzzified digital filter was developed to properly eliminate false sensor readings caused by burrs, holes and overspray. The digital filter was found to successfully generate the correct tool path for a blade with intentionally scanned holes and defects. The fuzzified filter improved the computation efficiency by a factor of 25. For application to general parts, an adaptive scanning algorithm was developed and presented with simulation results. A right pyramid and an ellipsoid were scanned successfully with the adaptive algorithm.

Kwok, Kwan S.; Loucks, C.S.; Driessen, B.J.

1997-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Argonne Chemical Sciences & Engineering -Electrochemical Energy...  

NLE Websites -- All DOE Office Websites (Extended Search)

Events Search Argonne ... Search Argonne Home > Chemical Sciences & Engineering > Battery Testing * Members * Contact * Publications * Overview * EADL EES Home Electrochemical...

142

Battery Materials and Electrochemical Processes I - Programmaster ...  

Science Conference Proceedings (OSTI)

Mar 4, 2013 ... Mesoscale Computational Materials Science of Energy Materials: Battery Materials and Electrochemical Processes I Sponsored by: TMS ...

143

Electrochemical Shock of Lithium Battery Materials - Programmaster ...  

Science Conference Proceedings (OSTI)

Symposium, Mesoscale Computational Materials Science of Energy Materials. Presentation Title, Electrochemical Shock of Lithium Battery Materials. Author(s) ...

144

Argonne Chemical Sciences & Engineering - People - Electrochemical...  

NLE Websites -- All DOE Office Websites (Extended Search)

News & Highlights Events Search Argonne ... Search Argonne Home > Chemical Sciences & Engineering > Fundamental Interactions Catalysis & Energy Conversion Electrochemical...

145

Results from Combined NMR and Electrochemical Impedance ...  

Science Conference Proceedings (OSTI)

Presentation Title, Oxygen-vacancy Transport in Heavily Doped Cubic Zirconia: Results from Combined NMR and Electrochemical Impedance Spectroscopies.

146

The APS direct-drive pulsed septum magnets  

Science Conference Proceedings (OSTI)

The Advanced Photon Source (APS) consists of four separate machines: linac, booster, positron accumulator ring (PAR) and storage ring (SR), plus three transfer lines interconnecting the machines. At least one thin, pulsed septum magnet is located at each splice joint. The stray field tolerances for two of these septum magnets are very stringent. As an example, for clean operation during the proposed top-up mode in the storage ring, the stray fields from the septum magnet must not exceed 1 G-m. The septum wall thickness must also not exceed 2.4 mm. To meet these requirements, direct-drive septum magnets with magnetic shield pipe around the stored beam region were developed and built. These magnets have now been tested and installed, and are used in daily operation. We describe the magnet(s) design, the measurement results, the actual operation, and performance.

Sheynin, S.; Lopez, F.; Milton, S.V.

1995-07-01T23:59:59.000Z

147

Machine augmented composite materials for damping purposes  

E-Print Network (OSTI)

In this study the energy dissipation performance of machine augmented composite (MAC) materials is investigated. MAC materials are formed by inserting simple machines into a matrix material. In this work the machines take the form of fluid filled tubes, and the tube cross-sectional geometry induces fluid flow when it is deformed in its plane. This flow dissipates mechanical energy, and thus provides the composite material with attractive damping properties. The objective of this study is to gain insight into the geometry, the material property combinations, and the boundary conditions that are effective in producing high damping MAC materials. Particular attention is given to tube geometry and to dimensionless parameters that govern the energy dissipation efficiency of a MAC lamina. An important dimensionless parameter is the ratio of solid elastic moduli to the product of the driving frequency and the fluid dynamic viscosity. This is a measure of the ratio of elastic forces in the solid material to the viscous forces in the fluid material that makes up a MAC lamina. Governing equations and simulation methods are discussed. Simplified equations are derived to predict the pressure generated when a tube/matrix cell is squeezed with zero pressure end conditions. Transient, three dimensional finite element models are also used to predict the performance of the damping MAC materials with zero pressure at the ends of the tubes. For the geometry and material properties considered, the highest energy dissipation efficiency predicted by these models is approximately 0.8 out of a maximum of 1.0.

McCutcheon, David Matthew

2004-12-01T23:59:59.000Z

148

Machine Learning for Global Optimization  

E-Print Network (OSTI)

approach for global optimization in which machine learning is used to predict ..... In Figure 1 we show the level curves of the 2–dimensional Rastrigin function.

149

ARM - SGP Rural Driving Hazards  

NLE Websites -- All DOE Office Websites (Extended Search)

Rural Driving Hazards Rural Driving Hazards SGP Related Links Facilities and Instruments Central Facility Boundary Facility Extended Facility Intermediate Facility Radiometric Calibration Facility Geographic Information ES&H Guidance Statement Operations Science Field Campaigns Visiting the Site Fact Sheet Images Information for Guest Scientists Contacts SGP Rural Driving Hazards The rural location of the Southern Great Plains (SGP) site facilities requires that visitors travel on unpaved, dirt and gravel, roads. Visitors should be aware of the driving hazards this presents by taking the following precautions: Proceed cautiously: Many rural roads have unmarked and blind intersections. Slow down: Sanded and gravel raods can cause a vehicle to swerve. Maintain a safe following distance: During the dry season, vehicles

150

Upgrading coal plant damper drives  

Science Conference Proceedings (OSTI)

The replacement of damper drives on two coal-fired units at the James H. Miller Jr. electric generating plant by Intelligent Contrac electric rotary actuators is discussed. 2 figs.

Hood, N.R.; Simmons, K. [Alamaba Power (United States)

2009-11-15T23:59:59.000Z

151

Direct drive field actuator motors  

DOE Patents (OSTI)

A positive-drive field actuator motor is described which includes a stator carrying at least one field actuator which changes in dimension responsive to application of an energy field, and at least one drive shoe movable by the dimensional changes of the field actuator to contact and move a rotor element with respect to the stator. Various embodiments of the motor are disclosed, and the rotor element may be moved linearly or arcuately. 62 figs.

Grahn, A.R.

1998-03-10T23:59:59.000Z

152

Mechanical drive for blood pump  

DOE Patents (OSTI)

This patent relates to a highly efficient blood pump to be used as a replacement for a ventricle of the human heart to restore people disabled by heart disease. The mechanical drive of the present invention is designed to operate in conjunction with a thermoelectric converter power source. The mechanical drive system essentially converts the output of a rotary power into pulsatile motion so that the power demand from the thermoelectric converter remains essentially constant while the blood pump output is pulsed. (auth)

Bifano, N.J.; Pouchot, W.D.

1975-07-29T23:59:59.000Z

153

Sheet electrode for electrochemical systems  

DOE Patents (OSTI)

An electrochemical cell construction features a novel co-extruded plastic electrode in an interleaved construction with a novel integral separator-spacer. Also featured is a leak and impact resistant construction for preventing the spill of corrosive materials in the event of rupture.

Tsien, Hsue C. (Chatham Township, Morris County, NJ); Newby, Kenneth R. (Berkeley Heights, NJ); Grimes, Patrick G. (Westfield, NJ); Bellows, Richard J. (Westfield, NJ)

1983-04-12T23:59:59.000Z

154

Separator material for electrochemical cells  

DOE Patents (OSTI)

An electrochemical cell is characterized as utilizing an aramid fiber as a separator material. The aramid fibers are especially suited for lithium/thionyl chloride battery systems. The battery separator made of aramid fibers possesses superior mechanical strength, chemical resistance, and is flame retardant.

Cieslak, W.R.; Storz, L.J.

1991-03-26T23:59:59.000Z

155

Separator material for electrochemical cells  

DOE Patents (OSTI)

An electrochemical cell characterized as utilizing an aramid fiber as a separator material. The aramid fibers are especially suited for lithium/thionyl chloride battery systems. The battery separator made of aramid fibers possesses superior mechanical strength, chemical resistance, and is flame retardant. 1 tab.

Cieslak, W.R.; Storz, L.J.

1989-06-12T23:59:59.000Z

156

Separator material for electrochemical cells  

DOE Patents (OSTI)

An electrochemical cell characterized as utilizing an aramid fiber as a separator material. The aramid fibers are especially suited for lithium/thionyl chloride battery systems. The battery separator made of aramid fibers possesses superior mechanical strength, chemical resistance, and is flame retardant.

Cieslak, Wendy R. (1166 Laurel Loop NE., Albuquerque, NM 87122); Storz, Leonard J. (2215 Ambassador NE., Albuquerque, NM 87112)

1991-01-01T23:59:59.000Z

157

Low backlash direct drive actuator  

DOE Patents (OSTI)

A low backlash direct drive actuator is described which comprises a motor such as a stepper motor having at least 200 steps per revolution; a two part hub assembly comprising a drive hub coaxially attached to the shaft of the motor and having a plurality of drive pins; a driven hub having a plurality of bores in one end thereof in alignment with the drive pins in the drive hub and a threaded shaft coaxially mounted in an opposite end of the driven hub; and a housing having a central bore therein into which are fitted the drive hub and driven hub, the housing having a motor mount on one end thereof to which is mounted the stepper motor, and a closed end portion with a threaded opening therein coaxial with the central bore in the housing and receiving therein the threaded shaft attached to the driven hub. Limit switches mounted to the housing cooperate with an enlarged lip on the driven hub to limit the lateral travel of the driven hub in the housing, which also acts to limit the lateral travel of the threaded shaft which functions as a lead screw.

Kuklo, Thomas C. (Oakland, CA)

1994-01-01T23:59:59.000Z

158

Knowledge representation and machine translation  

Science Conference Proceedings (OSTI)

This paper describes a new knowledge representation called "frame knowledge representation-0" (FKR-0), and an experimental machine translation system named ATLAS/I which uses FKR-0.The purpose of FKR-0 is to stored information required for machine translation ...

Susumu Sawai; Hiromichi Fukushima; Masakatsu Sugimoto; Naoya Ukai

1982-07-01T23:59:59.000Z

159

Cleaning of Free Machining Brass  

Science Conference Proceedings (OSTI)

We have investigated four brightening treatments proposed by two cleaning vendors for cleaning free machining brass. The experimental results showed that none of the proposed brightening treatments passed the swipe test. Thus, we maintain the recommendation of not using the brightening process in the cleaning of free machining brass for NIF application.

Shen, T

2005-12-29T23:59:59.000Z

160

MSc Design of Rotating Machines  

E-Print Network (OSTI)

design management and intellectual skills of communication in a group working environment. Focus on your interests The Machine Design specialism aims to provide students with a greater degree of training of stress analysis, machine dynamics, transmissions, computer aided engineering, and project management

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

FreedomCAR Advanced Traction Drive Motor Development Phase I  

DOE Green Energy (OSTI)

The overall objective of this program is to design and develop an advanced traction motor that will meet the FreedomCAR and Vehicle Technologies (FCVT) 2010 goals and the traction motor technical targets. The motor specifications are given in Section 1.3. Other goals of the program include providing a cost study to ensure the motor can be developed within the cost targets needed for the automotive industry. The program has focused on using materials that are both high performance and low costs such that the performance can be met and cost targets are achieved. In addition, the motor technologies and machine design features must be compatible with high volume manufacturing and able to provide high reliability, efficiency, and ruggedness while simultaneously reducing weight and volume. Weight and volume reduction will become a major factor in reducing cost, material cost being the most significant part of manufacturing cost at high volume. Many motor technology categories have been considered in the past and present for traction drive applications, including: brushed direct current (DC), PM (PM) brushless dc (BLDC), alternating current (AC) induction, switched reluctance and synchronous reluctance machines. Of these machine technologies, PM BLDC has consistently demonstrated an advantage in terms of power density and efficiency. As rare earth magnet cost has declined, total cost may also be reduced over the other technologies. Of the many different configurations of PM BLDC machines, those which incorporate power production utilizing both magnetic torque as well as reluctance torque appear to have the most promise for traction applications. There are many different PM BLDC machine configurations which employ both of these torque producing mechanisms; however, most would fall into one of two categories--some use weaker magnets and rely more heavily on reluctance torque (reluctance-dominant PM machines), others use strong PMs and supplement with reluctance torque (magnet-dominant PM machines). This report covers a trade study that was conducted in this phase I program to explore which type of machine best suits the FCVT requirements.

Ley, Josh (UQM Technologies, Inc.); Lutz, Jon (UQM Technologies, Inc.)

2006-09-01T23:59:59.000Z

162

Cone Drive Operations Inc | Open Energy Information  

Open Energy Info (EERE)

worm gear technology. The company supplies azimuth and elevation drives for solar tracking applications. References Cone Drive Operations Inc1 LinkedIn Connections CrunchBase...

163

Electric vehicle drive train with contactor protection ...  

A drive train for an electric vehicle includes a traction battery, a power drive circuit, a main contactor for connecting and disconnecting the ...

164

Driving Green com | Open Energy Information  

Open Energy Info (EERE)

| Sign Up Search Page Edit with form History Facebook icon Twitter icon Driving Green com Jump to: navigation, search Name Driving Green.com Place Melbourne, Florida Zip...

165

Environmental constituents of Electrical Discharge Machining  

E-Print Network (OSTI)

Electrical Discharge Machining (EDM) is a non-traditional process that uses no mechanical forces to machine metals. It is extremely useful in machining hard materials. With the advantages EDM has to offer and its presence ...

Cho, Margaret H. (Margaret Hyunjoo), 1982-

2004-01-01T23:59:59.000Z

166

Heavy Machine Shop | Central Fabrication Services | Brookhaven...  

NLE Websites -- All DOE Office Websites (Extended Search)

Heavy Machine Shop Heavy Machine Shop The Heavy Machine Shop facility is located in building 479, and may be accessed by the main door on the north face or front of the building....

167

Machine Learning Benchmarks and Random Forest Regression  

E-Print Network (OSTI)

Machine Learning Benchmarks and Random Forest Regressionerror on a suite of benchmark datasets. As the basethe Machine Learning Benchmark Problems package; see http://

Segal, Mark R

2004-01-01T23:59:59.000Z

168

Akrong Machine Services | Open Energy Information  

Open Energy Info (EERE)

Machine Services Jump to: navigation, search Name Akron Machine Services Address 17 w. Rosewood Ave Place Akron, Ohio Zip 44301 Sector Carbon Product Manufacturing Phone...

169

Ma'aden Open Mould Casting Machines  

Science Conference Proceedings (OSTI)

The paper will describe Ma'aden experience in ingot casting machines: commissioning and start-up, the challenges faced specially with De-molding machines, ...

170

Free Machining Brasses with Minimized Lead Content  

Science Conference Proceedings (OSTI)

Abstract Scope, Article describes the role of lead in free machining brass and ... Similar legislative acts take care of lead content in free machined brass.

171

Measurement Science for Smart Machine Tools  

Science Conference Proceedings (OSTI)

... ASME B5.59-2, "Information Technology for Machine Tools—Part 2: Data Specification for Properties of Machine tools for Milling and Turning,"and ...

2012-12-21T23:59:59.000Z

172

Optimal Design of Electrical Machines: Mathematical Programming ...  

E-Print Network (OSTI)

for the same problem of the design of an electrical machine without slot. ... tion, inverse problem, design, electrical machine ..... trade-off situation arises.

173

Slide system for machine tools  

DOE Patents (OSTI)

The present invention relates to a machine tool which permits the machining of nonaxisymmetric surfaces on a workpiece while rotating the workpiece about a central axis of rotation. The machine tool comprises a conventional two-slide system (X-Y) with one of these slides being provided with a relatively short travel high-speed auxiliary slide which carries the material-removing tool. The auxiliary slide is synchronized with the spindle speed and the position of the other two slides and provides a high-speed reciprocating motion required for the displacement of the cutting tool for generating a nonaxisymmetric surface at a selected location on the workpiece.

Douglass, S.S.; Green, W.L.

1980-06-12T23:59:59.000Z

174

Distribution Drive | Open Energy Information  

Open Energy Info (EERE)

Drive Drive Jump to: navigation, search Name Distribution Drive Place Dallas, Texas Zip 75205 Product Biodiesel fuel distributor. Coordinates 32.778155°, -96.795404° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":32.778155,"lon":-96.795404,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

175

Electrochemical synthesis of multisegmented nanowires  

Science Conference Proceedings (OSTI)

Electrochemical deposition has emerged as a promising route for nanostructure fabrication in recent years due to the many inherent advantages it possesses. This study focuses on the synthesis of high-aspect-ratio multisegmented Au/Ni nanowires using template-directed sequential electrochemical deposition techniques. By selectively removing the Ni segments in the nanowires, high-yield of pure gold nanorods of predetermined lengths was obtained. Alternatively, the sacrificial Ni segments in the nanowires can be galvanically displaced with Bi and Te to form barbells structures with Bi{sub x}Te{sub y} nanotubes attached to neighbouring gold segments. Detailed studies on the nanostructures obtained were carried out using various microscopy, diffraction and probebased techniques for structural, morphological and chemical characterizations.

Kok, Kuan-Ying; Ng, Inn-Khuan; Saidin, Nur Ubaidah [Malaysian Nuclear Agency, Bangi, 43000 Kajang (Malaysia)

2012-11-27T23:59:59.000Z

176

Vehicle Technologies Office: U.S. DRIVE  

NLE Websites -- All DOE Office Websites (Extended Search)

electrochemical energy storage Electric propulsion systems (e.g., power electronics, electric motors) Fuel cell power systems Lightweight materials Vehicle systems and...

177

Solid state electrochemical current source  

DOE Patents (OSTI)

A cathode and a solid state electrochemical cell comprising said cathode, a solid anode and solid fluoride ion conducting electrolyte. The cathode comprises a metal oxide and a compound fluoride containing at least two metals with different valences. Representative compound fluorides include solid solutions of bismuth fluoride and potassium fluoride; and lead fluoride and potassium fluoride. Representative metal oxides include copper oxide, lead oxide, manganese oxide, vanadium oxide and silver oxide.

Potanin, Alexander Arkadyevich (Sarov, RU); Vedeneev, Nikolai Ivanovich (Sarov, RU)

2002-04-30T23:59:59.000Z

178

Cathode composition for electrochemical cell  

DOE Patents (OSTI)

A high-temperature, secondary electrochemical cell includes a negative electrode containing an alkali metal such as lithium, an electrolyte of molten salt containing ions of that alkali metal and a positive electrode containing a mixture of metallic sulfides. The positive electrode composition is contained within a porous structure that permits permeation of molten electrolyte and includes a mixture of about 5% to 30% by weight Cu.sub.2 S in FeS.

Steunenberg, Robert K. (Naperville, IL); Martin, Allan E. (Woodridge, IL); Tomczuk, Zygmunt (Palos Hills, IL)

1976-01-01T23:59:59.000Z

179

Drive reconfiguration mechanism for tracked robotic vehicle  

SciTech Connect

Drive reconfiguration apparatus for changing the configuration of a drive unit with respect to a vehicle body may comprise a guide system associated with the vehicle body and the drive unit which allows the drive unit to rotate about a center of rotation that is located at about a point where the drive unit contacts the surface being traversed. An actuator mounted to the vehicle body and connected to the drive unit rotates the drive unit about the center of rotation between a first position and a second position.

Willis, W. David (Idaho Falls, ID)

2000-01-01T23:59:59.000Z

180

Compacted carbon for electrochemical cells  

DOE Patents (OSTI)

This invention provides compacted carbon that is useful in the electrode of an alkali metal/carbon electrochemical cell of improved capacity selected from the group consisting of: (a) coke having the following properties: (i) an x-ray density of at least 2.00 grams per cubic centimeters, (ii) a closed porosity of no greater than 5%, and (iii) an open porosity of no greater than 47%; and (b) graphite having the following properties: (i) an x-ray density of at least 2.20 grams per cubic centimeters, (ii) a closed porosity of no greater than 5%, and (iii) an open porosity of no greater than 25%. This invention also relates to an electrode for an alkali metal/carbon electrochemical cell comprising compacted carbon as described above and a binder. This invention further provides an alkali metal/carbon electrochemical cell comprising: (a) an electrode as described above, (b) a non-aqueous electrolytic solution comprising an organic aprotic solvent and an electrolytically conductive salt and an alkali metal, and (c) a counterelectrode.

Greinke, Ronald Alfred (Medina, OH); Lewis, Irwin Charles (Strongsville, OH)

1997-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Compacted carbon for electrochemical cells  

DOE Patents (OSTI)

This invention provides compacted carbon that is useful in the electrode of an alkali metal/carbon electrochemical cell of improved capacity selected from the group consisting of: (a) coke having the following properties: (1) an x-ray density of at least 2.00 grams per cubic centimeters, (2) a closed porosity of no greater than 5%, and (3) an open porosity of no greater than 47%; and (b) graphite having the following properties: (1) an x-ray density of at least 2.20 grams per cubic centimeters, (2) a closed porosity of no greater than 5%, and (3) an open porosity of no greater than 25%. This invention also relates to an electrode for an alkali metal/carbon electrochemical cell comprising compacted carbon as described above and a binder. This invention further provides an alkali metal/carbon electrochemical cell comprising: (a) an electrode as described above, (b) a non-aqueous electrolytic solution comprising an organic aprotic solvent and an electrolytically conductive salt and an alkali metal, and (c) a counter electrode. 10 figs.

Greinke, R.A.; Lewis, I.C.

1997-10-14T23:59:59.000Z

182

Direct control of air gap flux in permanent magnet machines  

DOE Patents (OSTI)

A method and apparatus for field weakening in PM machines uses field weakening coils (35, 44, 45, 71, 72) to produce flux in one or more stators (34, 49, 63, 64), including a flux which counters flux normally produced in air gaps between the stator(s) (34, 49, 63, 64) and the rotor (20, 21, 41, 61) which carries the PM poles. Several modes of operation are introduced depending on the magnitude and polarity of current in the field weakening coils (35, 44, 45, 71, 72). The invention is particularly useful for, but not limited to, the electric vehicle drives and PM generators.

Hsu, John S. (Oak Ridge, TN)

2000-01-01T23:59:59.000Z

183

Recent advances in kernel machines  

Science Conference Proceedings (OSTI)

This talk will review recent advances in the kernel methods focusing on support vector machines (SVM) for pattern recognition. Topics discussed include the kernel design issue through the multi kernel approach and the optimization issue with emphasis ...

Stéphane Canu

2010-11-01T23:59:59.000Z

184

ASC_machines_cielo_2  

National Nuclear Security Administration (NNSA)

ASC 1 Top500 winners ASC supercomputers ASC future supercomputers Leading High-Performance Computing ASCI Red * First sustained teraFLOPS machine * 1 teraFLOPS * 1 TOP500 6...

185

Resource Letter: Bio-molecular Nano-machines: where Physics, Chemistry, Biology and Technology meet  

E-Print Network (OSTI)

Cell is the structural and functional unit of life. This Resource Letter serves as a guide to the literature on nano-machines which drive not only intracellular movements, but also motility of the cell. These machines are usually proteins or macromolecular assemblies which require appropriate fuel for their operations. Although, traditionally, these machines were subjects of investigation in biology and biochemistry, increasing use of the concepts and techniques of physics in recent years have contributed to the quantitative understanding of the fundamental principles underlying their operational mechanisms. The possibility of exploiting these principles for the design and control of artificial nano-machines has opened up a new frontier in the bottom-up approach to nano-technology.

Debashish Chowdhury

2008-07-17T23:59:59.000Z

186

Shock-activated electrochemical power supplies  

DOE Patents (OSTI)

A shock-activated electrochemical power supply is provided which is initiated extremely rapidly and which has a long shelf life. Electrochemical power supplies of this invention are initiated much faster than conventional thermal batteries. Power supplies of this invention comprise an inactive electrolyte and means for generating a high-pressure shock wave such that the shock wave is propagated through the electrolytes rendering the electrolyte electrochemically active. 2 figs.

Benedick, W.B.; Graham, R.A.; Morosin, B.

1988-11-08T23:59:59.000Z

187

Electrochemical modeling of lithium polymer batteries.  

SciTech Connect

An electrochemical model for lithium polymer cells was developed and a parameter set for the model was measured using a series of laboratory experiments. Examples are supplied to demonstrate the capabilities of the electrochemical model to obtain the concentration, current, and potential distributions in lithium polymer cells under complex cycling protocols. The modeling results are used to identify processes that limit cell performance and for optimizing cell design. Extension of the electrochemical model to examine two-dimensional studies is also described.

Dees, D. W.; Battaglia, V. S.; Belanger, A.; Chemical Engineering; Inst. de recherche d' Hydro-Quebec

2002-08-22T23:59:59.000Z

188

Shock-activated electrochemical power supplies  

DOE Patents (OSTI)

A shock-activated electrochemical power supply is provided which is initiated extremely rapidly and which has a long shelf life. Electrochemical power supplies of this invention are initiated much faster than conventional thermal batteries. Power supplies of this invention comprise an inactive electrolyte and means for generating a high-pressure shock wave such that the shock wave is propagated through the electrolytes rendering the electrolyte electrochemically active.

Benedick, William B. (Albuquerque, NM); Graham, Robert A. (Los Lunas, NM); Morosin, Bruno (Albuquerque, NM)

1988-01-01T23:59:59.000Z

189

Shock-activated electrochemical power supplies  

DOE Patents (OSTI)

A shock-activated electrochemical power supply is provided which is initiated extremely rapidly and which has a long shelf life. Electrochemical power supplies of this invention are initiated much faster than conventional thermal batteries. Power supplies of this invention comprise an inactive electrolyte and means for generating a high-pressure shock wave such that the shock wave is propagated through the electrolyte rendering the electrolyte electrochemically active. 2 figs.

Benedick, W.B.; Graham, R.A.; Morosin, B.

1987-04-20T23:59:59.000Z

190

Hydromechanical transmission with hydrodynamic drive  

DOE Patents (OSTI)

This transmission has a first planetary gear assembly having first input means connected to an input shaft, first output means, and first reaction means, and a second planetary gear assembly having second input means connected to the first input means, second output means, and second reaction means connected directly to the first reaction means by a reaction shaft. First clutch means, when engaged, connect the first output means to an output shaft in a high driving range. A hydrodynamic drive is used; for example, a torque converter, which may or may not have a stationary case, has a pump connected to the second output means, a stator grounded by an overrunning clutch to the case, and a turbine connected to an output member, and may be used in a starting phase. Alternatively, a fluid coupling or other type of hydrodynamic drive may be used. Second clutch means, when engaged, for connecting the output member to the output shaft in a low driving range. A variable-displacement hydraulic unit is mechanically connected to the input shaft, and a fixed-displacement hydraulic unit is mechanically connected to the reaction shaft. The hydraulic units are hydraulically connected together so that when one operates as a pump the other acts as a motor, and vice versa. Both clutch means are connected to the output shaft through a forward-reverse shift arrangement. It is possible to lock out the torque converter after the starting phase is over.

Orshansky, Jr., deceased, Elias (LATE OF San Francisco, CA); Weseloh, William E. (San Diego, CA)

1979-01-01T23:59:59.000Z

191

Water drives peptide conformational transitions  

E-Print Network (OSTI)

Transitions between metastable conformations of a dipeptide are investigated using classical molecular dynamics simulation with explicit water molecules. The distribution of the surrounding water at different moments before the transitions and the dynamical correlations of water with the peptide's configurational motions indicate that water is the main driving force of the conformational changes.

Nerukh, Dmitry

2011-01-01T23:59:59.000Z

192

Anomalous-viscosity current drive  

DOE Patents (OSTI)

The present invention relates to a method and apparatus for maintaining a steady-state current for magnetically confining the plasma in a toroidal magnetic confinement device using anomalous viscosity current drive. A second aspect of this invention relates to an apparatus and method for the start-up of a magnetically confined toroidal plasma.

Stix, T.H.; Ono, M.

1986-04-25T23:59:59.000Z

193

Electrochemical Arsenic Remediation for Rural Bangladesh  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrochemical Arsenic Remediation for Rural Bangladesh NOTICE Due to the current lapse of federal funding, Berkeley Lab websites are accessible, but may not be updated until...

194

Electrochemical process for the preparation of nitrogen ...  

Electrochemical process for the preparation of nitrogen fertilizers United States Patent. Patent Number: 8,152,988: Issued: April 10, 2012: Official Filing:

195

Nanomaterial-Based Electrochemical Biosensors and Bioassays  

Science Conference Proceedings (OSTI)

This book chapter summarizes the recent advance in nanomaterials for electrochemical biosensors and bioassays. Biofunctionalization of nanomaterials for biosensors fabrication and their biomedical applications are discussed.

Liu, Guodong; Mao, Xun; Gurung, Anant; Baloda, Meenu; Lin, Yuehe; He, Yuqing

2010-08-31T23:59:59.000Z

196

Fundamentals of Electrochemical Deposition, Second Edition - TMS  

Science Conference Proceedings (OSTI)

Jul 25, 2007 ... Fundamentals of Electrochemical Deposition, 2nd Edition by Milan Paunovic and Mordechay Schlesinger provides a ... This is not a handbook.

197

Electrochemical Behavior of CIGS Electrodeposition for the ...  

Science Conference Proceedings (OSTI)

Presentation Title, Electrochemical Behavior of CIGS Electrodeposition for the Application of Photovoltaic Cell. Author(s), Hyunju Lee, Jae-Ho Lee, Yangdo Kim.

198

Electrochemical device and process of making  

DOE Patents (OSTI)

A process of making an electrochemical device comprising providing a trilayer structure comprising an electrode/electrolyte/electrode and simultaneously sintering the trilayer structure.

Jacobson, Craig P. (Lafayette, CA); Visco, Steven J. (Berkeley, CA); De Jonghe, Lutgard C. (Lafayette, CA)

2004-07-27T23:59:59.000Z

199

Wide Electrochemical Window Solvents - Energy Innovation Portal  

Biomass and Biofuels; ... This solvent has such a wide electrochemical window and such powerful solvating properties that it is an excellent target solvent ...

200

Robust Generator System Using PM Assisted Synchronous Reluctance Generator with Current-fed Drive  

E-Print Network (OSTI)

The growth of embedded generation and portable electrical installations has led to an increased demand for low cost, flexible and reliable generator systems for military and commercial applications. An interior permanent magnet (IPM) machine has high power density due to its reluctance torque and magnetic torque components so it can produce a large constant power-speed range. However, an IPM machine needs demagnetizing current at high-speed during the flux-weakening region and thus develops an inverter shutdown problem in an uncontrolled generator mode operation. In order to overcome the disadvantages of the IPM machine, the permanent magnet assisted synchronous reluctance generator (PMa-SynRG) can be a good solution for low cost, high efficiency reliable generator systems. A PMa-SynRG can produce a high efficiency drive by utilizing the proper amount of magnet and reluctance torque. This work proposes a PMa-SynRG with two flux barriers and permanent magnets embedded in the second layer of the rotor. A neodymium magnet (NdFeB) was used as permanent magnets in the rotor to prevent demagnetization. Finding the minimum amount of magnet is one of the goals of the optimization process. The objectives of this work are to build an optimal design for the 3kW generator and an advanced power electronics converter for the PMa-SynRG drive system. In order to find the optimized 3kW machine, a Lumped Parameter Model (LPM) was used to achieve fast computation, and Differential Evolution Strategy (DES) was used to embed the LPM in an efficient numerical optimization routine to identify optimum designs. Finite Element Analysis (FEA) was used for test performance of optimum designs. On the basis of differences between LPM and FEA, model predictions were used to fine tune the LPM model. For new optimum design converges, numerical optimizations and iterations were performed to produce LPM and FEA predictions. For the drive system, the thyristor based, current-fed drive is much simpler and has lower power losses compared to the pulse width modulation (PWM) drive. Eliminating the requirement for self-controlled switches is a distinct advantage for lower cost. Another feature of the developed current-fed drive is its inherent capability to provide generating action by making the PMa-SynRG operates as a generator, rectifying the phase voltages by means of the three-phase rectifier and feeding the power into the load. These features make the current-fed drive a good candidate for driving any type of synchronous generators including the proposed PMa-SynRG.

Baek, Jeihoon

2009-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Direct Semantics of Extended State Machines  

E-Print Network (OSTI)

In this paper we present semantic profiles for UML 2 state machines, which are based directly upon the structure of a state machine model, without requiring flattening or other transformations on these models. The approach addresses many of the semantic problems identified for state machines, and provides a basis for semantic analysis and proof of behavioural compatibility between state machines. 1

K. Lano; D. Clark

2007-01-01T23:59:59.000Z

202

Optimization Online - Optimal Design of Electrical Machines ...  

E-Print Network (OSTI)

Jun 8, 2011 ... Optimal Design of Electrical Machines: Mathematical Programming ... Science and Engineering (Multidisciplinary Design Optimization ).

203

Interpolator for numerically controlled machine tools  

DOE Patents (OSTI)

A digital differential analyzer circuit is provided that depending on the embodiment chosen can carry out linear, parabolic, circular or cubic interpolation. In the embodiment for parabolic interpolations, the circuit provides pulse trains for the X and Y slide motors of a two-axis machine to effect tool motion along a parabolic path. The pulse trains are generated by the circuit in such a way that parabolic tool motion is obtained from information contained in only one block of binary input data. A part contour may be approximated by one or more parabolic arcs. Acceleration and initial velocity values from a data block are set in fixed bit size registers for each axis separately but simultaneously and the values are integrated to obtain the movement along the respective axis as a function of time. Integration is performed by continual addition at a specified rate of an integrand value stored in one register to the remainder temporarily stored in another identical size register. Overflows from the addition process are indicative of the integral. The overflow output pulses from the second integration may be applied to motors which position the respective machine slides according to a parabolic motion in time to produce a parabolic machine tool motion in space. An additional register for each axis is provided in the circuit to allow "floating" of the radix points of the integrand registers and the velocity increment to improve position accuracy and to reduce errors encountered when the acceleration integrand magnitudes are small when compared to the velocity integrands. A divider circuit is provided in the output of the circuit to smooth the output pulse spacing and prevent motor stall, because the overflow pulses produced in the binary addition process are spaced unevenly in time. The divider has the effect of passing only every nth motor drive pulse, with n being specifiable. The circuit inputs (integrands, rates, etc.) are scaled to give exactly n times the desired number of pulses out, in order to compensate for the divider.

Bowers, Gary L. (Clinton, TN); Davenport, Clyde M. (Oak Ridge, TN); Stephens, Albert E. (Knoxville, TN)

1976-01-01T23:59:59.000Z

204

Real-time rotor bar current measurements using bluetooth technology for a brushless doubly-fed machine (BDFM  

E-Print Network (OSTI)

The Brushless Doubly Fed Machine (BDFM) shows economic promise as a variable speed drive or generator. The optimization of the machine and model-based control strategies both rely on machine models, and the experimental verification of these models. To date, dynamic measurements of rotor quantities have not been possible. The authors present a system of measuring rotor bar currents in real time using a Rogowski coil to detect the current and recently developed Bluetooth wireless technology to transmit the data from the moving rotor to a computer. Experimental data collected from the system are included. 1.

P. C. Roberts; E. Abdi Jalebi; R. A. Mcmahon; T. J. Flack

2004-01-01T23:59:59.000Z

205

US DRIVE Driving Research and Innovation for Vehicle Efficiency and Energy Sustainability Partnership Plan  

NLE Websites -- All DOE Office Websites (Extended Search)

Partnership Plan Partnership Plan March 2013 U.S. DRIVE Partnership Plan Table of Contents Foreword ....................................................................................................................................................... 2 Definition ...................................................................................................................................................... 3 Partners ......................................................................................................................................................... 3 U.S. DRIVE Vision ........................................................................................................................................... 3 U.S. DRIVE Mission ........................................................................................................................................ 4

206

Magnetically Coupled Adjustable Speed Drive Systems  

DOE Green Energy (OSTI)

Adjustable speed drive (ASD) technologies have the ability to precisely control motor sytems output and produce a numbr of benefits including energy and demand savings. This report examines the performance and cost effectiveness of a specific class of ASDs called magnetically-coupled adjustable speed drives (MC-ASD) which use the strength of a magnetic field to control the amount of torque transferred between motor and drive shaft. The MagnaDrive Adjustable Speed Coupling System uses fixed rare-earth magnets and varies the distance between rotating plates in the assembly. the PAYBACK Variable Speed Drive uses an electromagnet to control the speed of the drive

Chvala, William D.; Winiarski, David W.

2002-08-18T23:59:59.000Z

207

Carbon microstructures for electrochemical studies  

DOE Green Energy (OSTI)

Thin layers of photoresist were spin coated onto silicon wafers, and then carbonized to form smooth carbon films by heating in nitrogen for 1 hour at temperatures between 600 to 1100 C. Well-defined carbon microstructures on Si wafers that are being considered for electrodes in a microbattery concept were obtained by additional processing steps involving patterning and lithography of the photoresist prior to carbonization. The status of the fabrication of carbon microelectrodes obtained by pyrolysis of photoresist, characterization of the carbons by surface-sensitive techniques and electrochemical analysis by cyclic voltammetry of the I{sup -}/I{sub 3}{sup -} redox reaction is described.

Kostecki, Robert; Song, Xiang Yun; Kinoshita, Kim

2001-06-22T23:59:59.000Z

208

Nanoelectrode array for electrochemical analysis  

DOE Patents (OSTI)

A nanoelectrode array comprises a plurality of nanoelectrodes wherein the geometric dimensions of the electrode controls the electrochemical response, and the current density is independent of time. By combining a massive array of nanoelectrodes in parallel, the current signal can be amplified while still retaining the beneficial geometric advantages of nanoelectrodes. Such nanoelectrode arrays can be used in a sensor system for rapid, non-contaminating field analysis. For example, an array of suitably functionalized nanoelectrodes can be incorporated into a small, integrated sensor system that can identify many species rapidly and simultaneously under field conditions in high-resistivity water, without the need for chemical addition to increase conductivity.

Yelton, William G. (Sandia Park, NM); Siegal, Michael P. (Albuquerque, NM)

2009-12-01T23:59:59.000Z

209

HybriDrive Propulsion System  

NLE Websites -- All DOE Office Websites (Extended Search)

HybriDrive HybriDrive ® Propulsion System Cleaner, smarter power for transit DOE/FTA Fuel Cell Research Priorities Workshop Washington, DC 7 June 2010 Bart W. Mancini Sr. Principal Systems Engineer BAE Systems Ph: 607-770-4103 bart.mancini@baesystems.com 2 Overview 3 * BAE Systems FC Experience / Deployments * Technology gaps/barriers to full commercialization of fuel cell buses * Well-to-wheels energy efficiency and emissions * Cost metrics * Bus integration issues * Fuel cell bus R&D needs * Future plans BAE Systems FC Experience / Deployments 4 * 1998 - Georgetown/FTA/DOE Fuel Cell Bus #1 (still serviceable) * UTC 100 kW Phosphoric Acid FC using on-board Methanol Reformate, Hybrid propulsion & Electric accessories * 2000 - Georgetown/FTA/DOE Fuel Cell Bus #2 (retired) *

210

Granular gases under extreme driving  

E-Print Network (OSTI)

We study inelastic gases in two dimensions using event-driven molecular dynamics simulations. Our focus is the nature of the stationary state attained by rare injection of large amounts of energy to balance the dissipation due to collisions. We find that under such extreme driving, with the injection rate much smaller than the collision rate, the velocity distribution has a power-law high energy tail. The numerically measured exponent characterizing this tail is in excellent agreement with predictions of kinetic theory over a wide range of system parameters. We conclude that driving by rare but powerful energy injection leads to a well-mixed gas and constitutes an alternative mechanism for agitating granular matter. In this distinct nonequilibrium steady-state, energy cascades from large to small scales. Our simulations also show that when the injection rate is comparable with the collision rate, the velocity distribution has a stretched exponential tail.

W. Kang; J. Machta; E. Ben-Naim

2010-02-04T23:59:59.000Z

211

Alpha Channeling in Mirror Machines  

SciTech Connect

Because of their engineering simplicity, high-?, and steady-state operation, mirror machines and related open-trap machines such as gas dynamic traps, are an attractive concept for achieving controlled nuclear fusion. In these open-trap machines, the confinement occurs by means of magnetic mirroring, without the magnetic field lines closing upon themselves within the region of particle confinement. Unfortunately, these concepts have not achieved to date very spectacular laboratory results, and their reactor prospects are dimmed by the prospect of a low Q-factor, the ratio of fusion power produced to auxiliary power. Nonetheless, because of its engineering promise, over the years numerous improvements have been proposed to enhance the reactor prospects of mirror fusion, such as tandem designs, end-plugging, and electric potential barriers.

Fisch N.J.

2005-10-19T23:59:59.000Z

212

A Machine Approach for Field Weakening of Permanent-Magnet Motors  

SciTech Connect

The commonly known technology of field weakening for permanent-magnet (PM) motors is achieved by controlling the direct-axis current component through an inverter, without using mechanical variation of the air gap, a new machine approach for field weakening of PM machines by direct control of air-gap fluxes is introduced. The demagnetization situation due to field weakening is not an issue with this new method. In fact, the PMs are strengthened at field weakening. The field-weakening ratio can reach 1O:1 or higher. This technology is particularly useful for the PM generators and electric vehicle drives.

Hsu, J.S.

2000-04-02T23:59:59.000Z

213

BNL Blood Drives: Iron-rich foods  

NLE Websites -- All DOE Office Websites (Extended Search)

BNL Blood Drives: Iron-Rich Foods Blood Drive Home Seafood: Fish (cod, sardines, tuna, clams, oysters, shrimp) Poultry: Chicken, eggs, yolk Lean Red Meats: Beef, lamb, veal, pork,...

214

Buffered Electrochemical Polishing of Niobium  

SciTech Connect

The standard preparation of superconducting radio-frequency (SRF) cavities made of pure niobium include the removal of a 'damaged' surface layer, by buffered chemical polishing (BCP) or electropolishing (EP), after the cavities are formed. The performance of the cavities is characterized by a sharp degradation of the quality factor when the surface magnetic field exceeds about 90 mT, a phenomenon referred to as 'Q-drop'. In cavities made of polycrystalline fine grain (ASTM 5) niobium, the Q-drop can be significantly reduced by a low-temperature ({approx} 120 C) 'in-situ' baking of the cavity if the chemical treatment was EP rather than BCP. As part of the effort to understand this phenomenon, we investigated the effect of introducing a polarization potential during buffered chemical polishing, creating a process which is between the standard BCP and EP. While preliminary results on the application of this process to Nb cavities have been previously reported, in this contribution we focus on the characterization of this novel electrochemical process by measuring polarization curves, etching rates, surface finish, electrochemical impedance and the effects of temperature and electrolyte composition. In particular, it is shown that the anodic potential of Nb during BCP reduces the etching rate and improves the surface finish.

Gianluigi Ciovati, Hui Tian, Sean Corcoran

2011-03-01T23:59:59.000Z

215

Solid oxide electrochemical reactor science.  

DOE Green Energy (OSTI)

Solid-oxide electrochemical cells are an exciting new technology. Development of solid-oxide cells (SOCs) has advanced considerable in recent years and continues to progress rapidly. This thesis studies several aspects of SOCs and contributes useful information to their continued development. This LDRD involved a collaboration between Sandia and the Colorado School of Mines (CSM) ins solid-oxide electrochemical reactors targeted at solid oxide electrolyzer cells (SOEC), which are the reverse of solid-oxide fuel cells (SOFC). SOECs complement Sandia's efforts in thermochemical production of alternative fuels. An SOEC technology would co-electrolyze carbon dioxide (CO{sub 2}) with steam at temperatures around 800 C to form synthesis gas (H{sub 2} and CO), which forms the building blocks for a petrochemical substitutes that can be used to power vehicles or in distributed energy platforms. The effort described here concentrates on research concerning catalytic chemistry, charge-transfer chemistry, and optimal cell-architecture. technical scope included computational modeling, materials development, and experimental evaluation. The project engaged the Colorado Fuel Cell Center at CSM through the support of a graduate student (Connor Moyer) at CSM and his advisors (Profs. Robert Kee and Neal Sullivan) in collaboration with Sandia.

Sullivan, Neal P. (Colorado School of Mines, Golden, CO); Stechel, Ellen Beth; Moyer, Connor J. (Colorado School of Mines, Golden, CO); Ambrosini, Andrea; Key, Robert J. (Colorado School of Mines, Golden, CO)

2010-09-01T23:59:59.000Z

216

Cooling system for rotating machine  

Science Conference Proceedings (OSTI)

An electrical machine comprising a rotor is presented. The electrical machine includes the rotor disposed on a rotatable shaft and defining a plurality of radial protrusions extending from the shaft up to a periphery of the rotor. The radial protrusions having cavities define a fluid path. A stationary shaft is disposed concentrically within the rotatable shaft wherein an annular space is formed between the stationary and rotatable shaft. A plurality of magnetic segments is disposed on the radial protrusions and the fluid path from within the stationary shaft into the annular space and extending through the cavities within the radial protrusions.

Gerstler, William Dwight (Niskayuna, NY); El-Refaie, Ayman Mohamed Fawzi (Niskayuna, NY); Lokhandwalla, Murtuza (Clifton Park, NY); Alexander, James Pellegrino (Ballston Lake, NY); Quirion, Owen Scott (Clifton Park, NY); Palafox, Pepe (Schenectady, NY); Shen, Xiaochun (Schenectady, NY); Salasoo, Lembit (Schenectady, NY)

2011-08-09T23:59:59.000Z

217

A New Approach to Abstract Machines - Introduction to the Theory of Configuration Machines  

E-Print Network (OSTI)

An abstract machine is a theoretical model designed to perform a rigorous study of computation. Such a model usually consists of configurations, instructions, programs, inputs and outputs for the machine. In this paper we formalize these notions as a very simple algebraic system, called a configuration machine. If an abstract machine is defined as a configuration machine consisting of primitive recursive functions then the functions computed by the machine are always recursive. The theory of configuration machines provides a useful tool to study universal machines.

Luo, Zhaohua

2010-01-01T23:59:59.000Z

218

Syntactic mismatches in machine translation  

Science Conference Proceedings (OSTI)

This paper addresses one of the central problems arising at the transfer stage in machine translation: syntactic mismatches, that is, mismatches between a source-language sentence structure and its equivalent target-language sentence structure. The level ... Keywords: Deep-syntactic structure, Meaning-Text Theory, Paraphrasing, Syntactic mismatch, Transfer

Igor Mel'?uk; Leo Wanner

2006-06-01T23:59:59.000Z

219

Machinable dissolved metal oxide superconductors  

DOE Patents (OSTI)

Powders of a metal oxide superconductor are mixed with sufficient amount (10--80 mol%) of In, Sn, and/or Al, to become nonbrittle, machinable. Preferred superconductors are YBa[sub 2]Cu[sub 3]O[sub 7[minus]x] and Bi-Sr-Ca-Cu-O compounds.

Chen, Chung-Hsuan.

1991-01-01T23:59:59.000Z

220

Arbitrary norm support vector machines  

Science Conference Proceedings (OSTI)

Support vector machines (SVM) are state-of-the-art classifiers. Typically L2-norm or L1-norm is adopted as a regularization term in SVMs, while other norm-based SVMs, for example, the L0-norm SVM or even the L?-norm ...

Kaizhu Huang; Danian Zheng; Irwin King; Michael R. Lyu

2009-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Machine Shop Investigates PQ Issues  

Science Conference Proceedings (OSTI)

EPRI performed a power quality (PQ) audit to harden a machine shop against PQ-related issues. EPRI engineers investigated the various origins of existing PQ disturbances as well as the susceptibility of the plant equipment to these disturbances. This case study reports the findings of this detailed investigation.

2007-12-31T23:59:59.000Z

222

Polar Warnings A Lifelike Machine  

E-Print Network (OSTI)

States conducted its last underground nuclear test in 1992 and turned to Los Alamos and the other weapons Certification without Testing LOS ALAMOS DELIVERS THE FIRST NUCLEAR TRIGGER IN 20 YEARS A Lifelike Machine laboratories for a new approach to ensuring the continued safety and reliability of its nuclear deterrent

223

Machinable dissolved metal oxide superconductors  

DOE Patents (OSTI)

Powders of a metal oxide superconductor are mixed with sufficient amount (10--80 mol%) of In, Sn, and/or Al, to become nonbrittle, machinable. Preferred superconductors are YBa{sub 2}Cu{sub 3}O{sub 7{minus}x} and Bi-Sr-Ca-Cu-O compounds.

Chen, Chung-Hsuan

1991-12-31T23:59:59.000Z

224

Human-Machine Function Allocation  

Science Conference Proceedings (OSTI)

Table 1   Human-machine function comparison...ability Comparatively slow and poor computers. Excellent and very rapid computers. Memory storage Poor short-term storage. Excellent long-term storage. Excellent short-term storage. Long-term storage very

225

Lower hybrid current drive at plasma densities required for thermonuclear reactors  

Science Conference Proceedings (OSTI)

Driving current in high-density plasmas is essential for the progress of thermonuclear fusion energy research based on the tokamak concept. The lower hybrid current drive (LHCD) effect, is potentially the most suitable tool for driving current at large plasma radii, consistent with the needs of ITER steady state scenario. Unfortunately, experiments at reactor grade high plasma densities with kinetic profiles approaching those required for ITER, have shown problems in penetration of the LH power into the core plasma. These plasmas represent a basic reference for designing possible methods useful for assessing the LHCD concept in ITER. On the basis of the phenomenology observed during LHCD experiments carried out in different machines, and model of the spectral broadening effect due to parametric instability, an interpretation and possible solution of the related important problem is presented.

Cesario, R.; Cardinali, A.; Castaldo, C.; Tuccillo, A. A.; Amicucci, L. [Associazione EURATOM/ENEA sulla Fusione, Centro Ricerche Frascati, 00044 Frascati (Italy)

2011-12-23T23:59:59.000Z

226

Reduction in iron losses in Indirect Vector-Controlled IM Drive using FLC  

E-Print Network (OSTI)

This paper describes the use of fuzzy logic controller for efficiency optimization control of a drive while keeping good dynamic response. At steady-state light-load condition, the fuzzy controller adaptively adjusts the excitation current with respect to the torque current to give the minimum total copper and iron loss. The measured input power such that, for a given load torque and speed, the drive settles down to the minimum input power, i.e., operates at maximum efficiency. The low-frequency pulsating torque due to decrementation of flux is compensated in a feed forward manner. If the load torque or speed commands changes, the efficiency search algorithm is abandoned and the rated flux is established to get the best dynamic response. The drive system with the proposed efficiency optimization controller has been simulated with lossy models of converter and machine, and its performance has been thoroughly investigated.

Srisailam, C; Trivedi, Anurag

2010-01-01T23:59:59.000Z

227

Small Businesses Helping Drive Economy: Clean Energy, Clean Sites...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Small Businesses Helping Drive Economy: Clean Energy, Clean Sites Small Businesses Helping Drive Economy: Clean Energy, Clean Sites A memo on small businesses helping drive the...

228

Adjustable Speed Drive Industrial Applications  

E-Print Network (OSTI)

Electric motors are significant users of electricity in the United States. Approximately 66 percent of the total electricity in the U.S. is used by electric motors. Electronic adjustable speed drives (ASDs) can save energy, lower maintenance cost and improve product quality. By providing a variable frequency output to ac motors the speed of the motors can be controlled and matched to the process requirements. The benefits that may be derived from using ASDs are described and the type of ASDs, applications and specific case studies of ASD installations are also discussed.

Poole, J. N.

1989-09-01T23:59:59.000Z

229

Low-Cost Single-Phase Powered Induction Machine Drive for Residential Applications  

E-Print Network (OSTI)

-usage. Reliability was estimated via MTBF as calculated per MIL-HDBK-217 for each sub-system as well as the complete

Chapman, Patrick

230

Adaptive fuzzy logic controller for feed drives of a CNC machine tool  

E-Print Network (OSTI)

hydrocarbons can be carried out in a number of ways: steam reforming, thermo-catalytic reforming, partial

Michigan, University of

231

Electrolyte for an electrochemical cell  

DOE Patents (OSTI)

Described is a thin-film battery, especially a thin-film microbattery, and a method for making the same having application as a backup or primary integrated power source for electronic devices. The battery includes a novel electrolyte amorphous lithium phosphorus oxynitride which is electrochemically stable and does not react with the lithium anode and a novel vanadium oxide cathode Configured as a microbattery, the battery can be fabricated directly onto a semiconductor chip, onto the semiconductor die or onto any portion of the chip carrier. The battery can be fabricated to any specified size or shape to meet the requirements of a particular application. The battery is fabricated of solid state materials and is capable of operation between {minus}15 C and 150 C. 9 figs.

Bates, J.B.; Dudney, N.J.

1997-01-28T23:59:59.000Z

232

Electrolyte for an electrochemical cell  

DOE Patents (OSTI)

Described is a thin-film battery, especially a thin-film microbattery, and a method for making same having application as a backup or primary integrated power source for electronic devices. The battery includes a novel electrolyte amorphous lithium phosphorus oxynitride which is electrochemically stable and does not react with the lithium anode and a novel vanadium oxide cathode Configured as a microbattery, the battery can be fabricated directly onto a semiconductor chip, onto the semiconductor die or onto any portion of the chip carrier. The battery can be fabricated to any specified size or shape to meet the requirements of a particular application. The battery is fabricated of solid state materials and is capable of operation between -15.degree. C. and 150.degree. C.

Bates, John B. (Oak Ridge, TN); Dudney, Nancy J. (Knoxville, TN)

1997-01-01T23:59:59.000Z

233

Cathode for an electrochemical cell  

SciTech Connect

Described is a thin-film battery, especially a thin-film microbattery, and a method for making same having application as a backup or primary integrated power source for electronic devices. The battery includes a novel electrolyte which is electrochemically stable and does not react with the lithium anode and a novel vanadium oxide cathode. Configured as a microbattery, the battery can be fabricated directly onto a semiconductor chip, onto the semiconductor die or onto any portion of the chip carrier. The battery can be fabricated to any specified size or shape to meet the requirements of a particular application. The battery is fabricated of solid state materials and is capable of operation between -15.degree. C. and 150.degree. C.

Bates, John B. (Oak Ridge, TN); Dudney, Nancy J. (Knoxville, TN); Gruzalski, Greg R. (Oak Ridge, TN); Luck, Christopher F. (Knoxville, TN)

2001-01-01T23:59:59.000Z

234

Mediated electrochemical hazardous waste destruction  

SciTech Connect

There are few permitted processes for mixed waste (radioactive plus chemically hazardous) treatment. We are developing electrochemical processes that convert the toxic organic components of mixed waste to water, carbon dioxide, an innocuous anions such as chloride. Aggressive oxidizer ions such as Ag{sup 2+} or Ce{sup +4} are produced at an anode. These can attack the organic molecules directly. They can also attack water which yields hydroxyl free radicals that in turn attack the organic molecules. The condensed (i.e., solid and/or liquid) effluent streams contain the inorganic radionuclide forms. These may be treated with existing technology and prepared for final disposal. Kinetics and the extent of destruction of some toxic organics have been measured. Depending on how the process is operated, coulombic efficiency can be nearly 100%. In addition, hazardous organic materials are becoming very expensive to dispose of and when they are combined with transuranic radioactive elements no processes are presently permitted. Mediated electrochemical oxidation is an ambient-temperature aqueous-phase process that can be used to oxidize organic components of mixed wastes. Problems associated with incineration, such as high-temperature volatilization of radionuclides, are avoided. Historically, Ag (2) has been used as a mediator in this process. Fe(6) and Co(3) are attractive alternatives to Ag(2) since they form soluble chlorides during the destruction of chlorinated solvents. Furthermore, silver itself is a toxic heavy metal. Quantitative data has been obtained for the complete oxidation of ethylene glycol by Fe(6) and Co(3). Though ethylene glycol is a nonhalogenated organic, this data has enabled us to make direct comparisons of activities of Fe(6) and Co(3) with Ag(2). Very good quantitative data for the oxidation of ethylene glycol by Ag(2) had already been collected. 4 refs., 6 figs.

Hickman, R.G.; Farmer, J.C.; Wang, F.T.

1991-08-01T23:59:59.000Z

235

Process for electrochemically gasifying coal using electromagnetism  

DOE Patents (OSTI)

A process for electrochemically gasifying coal by establishing a flowing stream of coal particulate slurry, electrolyte and electrode members through a transverse magnetic field that has sufficient strength to polarize the electrode members, thereby causing them to operate in combination with the electrolyte to electrochemically reduce the coal particulate in the slurry. Such electrochemical reduction of the coal produces hydrogen and carbon dioxide at opposite ends of the polarized electrode members. Gas collection means are operated in conjunction with the process to collect the evolved gases as they rise from the slurry and electrolyte solution.

Botts, Thomas E. (Markham, VA); Powell, James R. (Shoreham, NY)

1987-01-01T23:59:59.000Z

236

Using linguistic knowledge in statistical machine translation  

E-Print Network (OSTI)

In this thesis, we present methods for using linguistically motivated information to enhance the performance of statistical machine translation (SMT). One of the advantages of the statistical approach to machine translation ...

Zbib, Rabih M. (Rabih Mohamed), 1974-

2010-01-01T23:59:59.000Z

237

Spatial Ontology in Factored Statistical Machine Translation  

Science Conference Proceedings (OSTI)

This paper presents a statistical phrase-based machine translation system which is enriched with semantic data coming from a spatial ontology. Paper presents the spatial ontology, how it is integrated in statistical machine translation system using factored ...

Raivis Skadi?š

2011-08-01T23:59:59.000Z

238

Automated energy monitoring of machine tools  

E-Print Network (OSTI)

in the energy usage, such as increased total consumption fortotal energy use for the machine tool based on the usage

Vijayaraghavan, Athulan; Dornfeld, David

2010-01-01T23:59:59.000Z

239

Do Accelerating Turing Machines Compute the Uncomputable?  

Science Conference Proceedings (OSTI)

Accelerating Turing machines have attracted much attention in the last decade or so. They have been described as "the work-horse of hypercomputation" (Potgieter and Rosinger 2010: 853). But do they really compute beyond the "Turing limit"--e.g., compute ... Keywords: ATM paradox, Accelerating Turing machine, Epistemic embedding, External and internal computation, Halting problem, Hypercomputation, Ontology of computing, Supertask, Thompson lamp paradox, Turing-machine purism, Turing-machine realism

B. Jack Copeland; Oron Shagrir

2011-05-01T23:59:59.000Z

240

Software Tackles Production Line Machine ?Cyclic Jitters?  

Science Conference Proceedings (OSTI)

Software Tackles Production Line Machine 'Cyclic ... products, even shutting down assembly lines. ... high-speed data transmission characteristics of ...

2011-07-18T23:59:59.000Z

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Method and apparatus for monitoring machine performance  

DOE Patents (OSTI)

Machine operating conditions can be monitored by analyzing, in either the time or frequency domain, the spectral components of the motor current. Changes in the electric background noise, induced by mechanical variations in the machine, are correlated to changes in the operating parameters of the machine.

Smith, Stephen F. (Loudon, TN); Castleberry, Kimberly N. (Harriman, TN)

1996-01-01T23:59:59.000Z

242

Hindi to Punjabi machine translation system  

Science Conference Proceedings (OSTI)

Hindi-Punjabi being closely related language pair (Goyal V. and Lehal G. S., 2008), Hybrid Machine Translation approach has been used for developing Hindi to Punjabi Machine Translation System. Non-availability of lexical resources, spelling variations ... Keywords: Hindi, Punjabi, closely related languages, computational linguistics, machine translation, natural language processing, translate Hindi to Punjabi

Vishal Goyal; Gurpreet Singh Lehal

2011-06-01T23:59:59.000Z

243

Machine learning in space: extending our reach  

Science Conference Proceedings (OSTI)

We introduce the challenge of using machine learning effectively in space applications and motivate the domain for future researchers. Machine learning can be used to enable greater autonomy to improve the duration, reliability, cost-effectiveness, and ... Keywords: Autonomy, Machine learning applications, Space missions

Amy Mcgovern; Kiri L. Wagstaff

2011-09-01T23:59:59.000Z

244

Nano-Machines Achieve Huge Mechanical Breakthrough  

E-Print Network (OSTI)

NANO TECH Nano-Machines Achieve Huge Mechanical Breakthrough Dublin, Ireland (SPX) Sep 08, 2005 that use molecular 'nano'-machines of this kind to help perform physical tasks. Nano-machines could also owners set to return to battered Orleans l Six dead, two missing after heavy rains hit Page 1 of 3Nano

Leigh, David A.

245

A first look at cellular machine-to-machine traffic: large scale measurement and characterization  

Science Conference Proceedings (OSTI)

Cellular network based Machine-to-Machine (M2M) communication is fast becoming a market-changing force for a wide spectrum of businesses and applications such as telematics, smart metering, point-of-sale terminals, and home security and automation systems. ... Keywords: cellular network, machine-to-machine traffic

Muhammad Zubair Shafiq; Lusheng Ji; Alex X. Liu; Jeffrey Pang; Jia Wang

2012-06-01T23:59:59.000Z

246

Machine-to-Machine Communications and Security Solution in Cellular Systems  

Science Conference Proceedings (OSTI)

This paper introduces an efficient machine-to-machine M2M communication model based on 4G cellular systems. M2M terminals are capable of establishing Ad Hoc clusters wherever they are close enough. It is also possible to extend the cellular coverage ... Keywords: 4G Network, Ad Hoc, Machine-To-Machine, Security, Terminals

Mahdy Saedy; Vahideh Mojtahed

2011-04-01T23:59:59.000Z

247

System and method for networking electrochemical devices  

DOE Patents (OSTI)

An improved electrochemically active system and method including a plurality of electrochemical devices, such as fuel cells and fluid separation devices, in which the anode and cathode process-fluid flow chambers are connected in fluid-flow arrangements so that the operating parameters of each of said plurality of electrochemical devices which are dependent upon process-fluid parameters may be individually controlled to provide improved operating efficiency. The improvements in operation include improved power efficiency and improved fuel utilization in fuel cell power generating systems and reduced power consumption in fluid separation devices and the like through interstage process fluid parameter control for series networked electrochemical devices. The improved networking method includes recycling of various process flows to enhance the overall control scheme.

Williams, Mark C. (Morgantown, WV); Wimer, John G. (Morgantown, WV); Archer, David H. (Pittsburgh, PA)

1995-01-01T23:59:59.000Z

248

Rechargeable thin-film electrochemical generator  

DOE Patents (OSTI)

An improved electrochemical generator is disclosed. The electrochemical generator includes a thin-film electrochemical cell which is maintained in a state of compression through use of an internal or an external pressure apparatus. A thermal conductor, which is connected to at least one of the positive or negative contacts of the cell, conducts current into and out of the cell and also conducts thermal energy between the cell and thermally conductive, electrically resistive material disposed on a vessel wall adjacent the conductor. The thermally conductive, electrically resistive material may include an anodized coating or a thin sheet of a plastic, mineral-based material or conductive polymer material. The thermal conductor is fabricated to include a resilient portion which expands and contracts to maintain mechanical contact between the cell and the thermally conductive material in the presence of relative movement between the cell and the wall structure. The electrochemical generator may be disposed in a hermetically sealed housing.

Rouillard, Roger (Beloeil, CA); Domroese, Michael K. (South St. Paul, MN); Hoffman, Joseph A. (Minneapolis, MN); Lindeman, David D. (Hudson, WI); Noel, Joseph-Robert-Gaetan (St-Hubert, CA); Radewald, Vern E. (Austin, TX); Ranger, Michel (Lachine, CA); Sudano, Anthony (Laval, CA); Trice, Jennifer L. (Eagan, MN); Turgeon, Thomas A. (Fridley, MN)

2000-09-15T23:59:59.000Z

249

Low-temperature thermally regenerative electrochemical system  

DOE Patents (OSTI)

A thermally regenerative electrochemical system is described including an electrochemical cell with two water-based electrolytes separated by an ion exchange membrane, at least one of the electrolytes containing a complexing agent and a salt of a multivalent metal whose respective order of potentials for a pair of its redox couples is reversible by a change in the amount of the ocmplexing agent in the electrolyte, the complexing agent being removable by distillation to cause the reversal.

Loutfy, R.O.; Brown, A.P.; Yao, N.P.

1982-04-21T23:59:59.000Z

250

A micro-machined resonator  

DOE Patents (OSTI)

This invention is comprised of a micro-machined resonator, typically quartz, with upper and lower micromachinable support members, or covers, having etched wells which may be lined with conductive electrode material, between the support members is a quartz resonator having an energy trapping quartz mesa capacitively coupled to the electrodes through a diaphragm; the quartz resonator is supported by either micro-machined cantilever springs or by thin layers extending over the surfaces of the support. If the diaphragm is rigid, clock applications are available, and if the diaphragm is resilient, then transducer applications can be achieved. Either the thin support layers or the conductive electrode material can be integral with the diaphragm. In any event, the covers are bonded to form a hermetic seal and the interior volume may be filled with a gas or may be evacuated. In addition, one or both of the covers may include oscillator and interface circuitry for the resonator.

Godshall, N.A.; Koehler, D.R.; Liang, A.Y.; Smith, B.K.

1991-12-31T23:59:59.000Z

251

DOE Drives Big Data Push  

NLE Websites -- All DOE Office Websites (Extended Search)

2 Volume 9 Issue 2 2 Volume 9 Issue 2 From YAGS to Planetary Biology . . . . . . . . . . . . . . . 2 DOE Drives Big Data Push . . . . . . . . . . . . . . . . . . . . 3 Sweating Small Scale Genomics . . . . . . . . . . . . . . . 6 The Future of the DOE JGI . . . . . . . . . . . . . . . . . . . . 7 Save the Date for Meeting 8 . . . . . . . . . . . . . . . . . . . 8 also in this issue With a record 488 genomics researchers and bioinformaticians sitting in the Marriott Walnut Creek ballroom, New York Times science writer Carl Zimmer opened the DOE Joint Genome Institute's 7th Annual Genomics of Energy & Environment Meeting on March 20, 2012. Sharing his thoughts about being "On the Genome Beat," he informed the audience that he was worn down by seeing news about scientists successfully sequencing yet another genome sequence, and that "maybe some genomes shouldn't be written about." Zimmer's words engaged the audience in a discussion that

252

Current Drive in Recombining Plasma  

SciTech Connect

The Langevin equations describing the average collisional dynamics of suprathermal particles in nonstationary plasma remarkably admit an exact analytical solution in the case of recombining plasma. The current density produced by arbitrary particle fluxes is derived including the effect of charge recombination. Since recombination has the effect of lowering the charge density of the plasma, thus reducing the charged particle collisional frequencies, the evolution of the current density can be modified substantially compared to plasma with fixed charge density. The current drive efficiency is derived and optimized for discrete and continuous pulses of current, leading to the discovery of a nonzero "residual" current density that persists indefinitely under certain conditions, a feature not present in stationary plasmas.

P.F. Schmit and N.J. Fisch

2012-05-15T23:59:59.000Z

253

Current drive in recombining plasma  

SciTech Connect

The Langevin equations describing the average collisional dynamics of suprathermal particles in nonstationary plasma remarkably admit an exact analytical solution in the case of recombining plasma. The current density produced by arbitrary particle fluxes is derived including the influence of charge recombination. Since recombination has the effect of lowering the charge density of the plasma, thus reducing the charged particle collisional frequencies, the evolution of the current density can be modified substantially compared to plasma with fixed charge density. The current drive efficiency is derived and optimized for discrete and continuous pulses of current, leading to the discovery of a nonzero ''residual'' current density that persists indefinitely under certain conditions, a feature not present in stationary plasmas.

Schmit, P. F.; Fisch, N. J. [Department of Astrophysical Sciences, Princeton University, Princeton, New Jersey 08544 (United States)

2011-10-15T23:59:59.000Z

254

Vehicle Technologies Office: U.S. DRIVE  

NLE Websites -- All DOE Office Websites (Extended Search)

U.S. DRIVE U.S. DRIVE Logo for U.S. DRIVE - Driving Research and Innovation for Vehicle efficiency and Energy sustainability. U.S. DRIVE stands for Driving Research and Innovation for Vehicle efficiency and Energy sustainability. It is a non-binding and voluntary government-industry partnership focused on advanced automotive and related infrastructure technology research and development (R&D). Specifically, the Partnership is a forum for pre-competitive technical information exchange among partners to discuss R&D needs, develop joint goals and technology roadmaps, and evaluate R&D progress for a broad range of technical areas. By providing a framework for frequent and regular interaction among technical experts in a common area of expertise, the Partnership -

255

Electric vehicle drive train with contactor protection  

SciTech Connect

A drive train for an electric vehicle includes a traction battery, a power drive circuit, a main contactor for connecting and disconnecting the traction battery and the power drive circuit, a voltage detector across contacts of the main contactor, and a controller for controlling the main contactor to prevent movement of its contacts to the closed position when the voltage across the contacts exceeds a predetermined threshold, to thereby protect the contacts of the contactor. The power drive circuit includes an electric traction motor and a DC-to-AC inverter with a capacitive input filter. The controller also inhibits the power drive circuit from driving the motor and thereby discharging the input capacitor if the contacts are inadvertently opened during motoring. A precharging contactor is controlled to charge the input filter capacitor prior to closing the main contactor to further protect the contacts of the main contactor.

Konrad, Charles E. (Roanoke, VA); Benson, Ralph A. (Roanoke, VA)

1994-01-01T23:59:59.000Z

256

Electric vehicle drive train with contactor protection  

DOE Patents (OSTI)

A drive train for an electric vehicle includes a traction battery, a power drive circuit, a main contactor for connecting and disconnecting the traction battery and the power drive circuit, a voltage detector across contacts of the main contactor, and a controller for controlling the main contactor to prevent movement of its contacts to the closed position when the voltage across the contacts exceeds a predetermined threshold, to thereby protect the contacts of the contactor. The power drive circuit includes an electric traction motor and a DC-to-AC inverter with a capacitive input filter. The controller also inhibits the power drive circuit from driving the motor and thereby discharging the input capacitor if the contacts are inadvertently opened during motoring. A precharging contactor is controlled to charge the input filter capacitor prior to closing the main contactor to further protect the contacts of the main contactor. 3 figures.

Konrad, C.E.; Benson, R.A.

1994-11-29T23:59:59.000Z

257

Z Machine | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Z Machine | National Nuclear Security Administration Z Machine | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Z Machine Z Machine Home > About Us > Our Programs > Defense Programs > Office of Research, Development, Test, and Evaluation > Office of Inertial Confinement Fusion > Facilities > Z Machine Z Machine Z Machine Sandia National Laboratories

258

Marketing & Driving Demand: Social Media Tools & Strategies ...  

NLE Websites -- All DOE Office Websites (Extended Search)

Marketing & Driving Demand: Social Media Tools & Strategies January 16, 2011 Maryanne Fuller (MF): Hi there. This is Maryanne Fuller from Lawrence Berkeley National Laboratory....

259

Wind Turbine Design Innovations Drive Industry Transformation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Wind Turbine Design Innovations Drive Industry Transformation For more than 20 years, the National Renewable Energy Laboratory (NREL) has helped GE and its predecessors achieve...

260

Electric-Drive Vehicle Basics (Brochure)  

DOE Green Energy (OSTI)

Describes the basics of electric-drive vehicles, including hybrid electric vehicles, plug-in hybrid electric vehicles, all-electric vehicles, and the various charging options.

Not Available

2011-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Electric Drive Vehicles and Their Infrastructure Issues  

NLE Websites -- All DOE Office Websites (Extended Search)

Clean Cities Webinar - Electric Drive Vehicles and Their Infrastructure Issues (March 2010) Jim Francfort and Don Karner Advanced Vehicle Testing Activity March 24, 2010 This...

262

Fuel Economy: What Drives Consumer Choice?  

E-Print Network (OSTI)

Car Buyers and Fuel Economy? ” Energy Policy, vol. 35, 2007.Fuel Economy: What Drives Consumer Choice? BY TOMyou think about fuel economy? ” Rather, we listened closely

Turrentine, Tom; Kurani, Kenneth S; Heffner, Reid R.

2008-01-01T23:59:59.000Z

263

Fuel Economy: What Drives Consumer Choice?  

E-Print Network (OSTI)

Car Buyers and Fuel Economy? ” Energy Policy, vol. 35, 2007.Fuel Economy: What Drives Consumer Choice? BY TOMyou think about fuel economy? ” Rather, we listened closely

Turrentine, Tom; Kurani, Kenneth; Heffner, Rusty

2007-01-01T23:59:59.000Z

264

Electrochemical oxidation of organic materials  

DOE Patents (OSTI)

This invention is a method and apparatus for the direct oxidation of organic materials, especially organic wastes, in an electrochemical cell. It fulfills the need for a simple, cost-effective way for generators of small quantities of waste to deal with that waste. It does not use an electron transfer agent, which may be a source of additional hazardous waste. The anode is made of carbon felt; the cathode is platinum; and the electrolyte is a strong oxidizer, preferably nitric acid. The potential difference is 2 to 3 volts; the current density is 0.15 to 0.25 A/cm{sup 2}. The porous barrier is a medium grade alumina frit or an ion exchange membrane. The organic materials are fed to the anode compartment; the resulting oxygen bubbling circumvents the need for stirring or circulating the waste. Many different types of waste (e.g. rubber gloves, TBP, process solutions, etc.) can be fed to the anode compartment without the need to process or store it. 3 figs. (DLC)

Almon, A.C.

1991-01-01T23:59:59.000Z

265

Experimental electrochemical capacitor test results  

DOE Green Energy (OSTI)

Various electrochemical capacitors (ultracapacitors) are being developed for hybrid vehicles as candidate power assist devices for the fast response engine. The primary functions of the ultracapacitor are to level the dynamic power loads on the primary propulsion device and recover available energy from regenerative breaking during off-peak power periods. Ultracapacitors show promise toward being able to accept high regenerative pulses while exhibiting very high cycle life. This paper will present test data from selected US Department of Energy (DOE) supported ultracapacitor projects designed to meet the fast response engine requirements. Devices containing carbon, conducting polymers, and metal oxide electrode materials in combination with aqueous or organic electrolytes are being supported by the DOE. This paper will present and discuss testing data obtained from recent prototype capacitors supplied by Maxwell Energy Products, Inc., SAFT America, Inc., Federal Fabrics-Fibers and the University of Wisconsin-Madison. Constant-current, constant-power, leakage-current, and self-discharge testing of these various capacitors have been conducted. All devices were cycled between the rated charged voltage and zero volts for the constant-current tests and between the rated charged voltage and half that value for the constant-power tests.

Wright, R.B.; Murphy, T.C.; Kramer, W.E. [Lockheed Martin Idaho Technology Co., Idaho Falls, ID (United States). Idaho National Engineering and Environmental Lab.; Satula, R.A.; Rogers, S.A. [Dept. of Energy, Washington, DC (United States)

1997-11-01T23:59:59.000Z

266

Machines  

Science Conference Proceedings (OSTI)

...are used to supply electrical energy for the welding operation. The transformer tap switch frequently is a rotary, eight-step, knife-type, fully enclosed locking switch, which provides convenient adjustment of the welding voltage to suit work

267

Experiments with the Dragon Machine  

Science Conference Proceedings (OSTI)

The basic characteristics of a self-sustaining chain reaction were demonstrated with the Chicago Pile in 1943, but it was not until early 1945 that sufficient enriched material became available to experimentally verify fast-neutron cross-sections and the kinetic characteristics of a nuclear chain reaction sustained with prompt neutrons alone. However, the demands of wartime and the rapid decline in effort following the cessation of hostilities often resulted in the failure to fully document the experiments or in the loss of documentation as personnel returned to civilian pursuits. When documented, the results were often highly classified. Even when eventually declassified, the data were often not approved for public release until years later.2 Even after declassification and approval for public release, the records are sometimes difficult to find. Through a fortuitous discovery, a set of handwritten notes by ''ORF July 1945'' entitled ''Dragon - Research with a Pulsed Fission Reactor'' was found by William L. Myers in an old storage safe at Pajarito Site of the Los Alamos National Laboratory3. Of course, ORF was identified as Otto R. Frisch. The document was attached to a page in a nondescript spiral bound notebook labeled ''494 Book'' that bore the signatures of Louis Slotin and P. Morrison. The notes also reference an ''Idea LS'' that can only be Louis Slotin. The discovery of the notes led to a search of Laboratory Archives, the negative files of the photo lab, and the Report Library for additional details of the experiments with the Dragon machine that were conducted between January and July 1945. The assembly machine and the experiments were carefully conceived and skillfully executed. The analyses--without the crutch of computers--display real insight into the characteristics of the nuclear chain reaction. The information presented here provides what is believed to be a complete collection of the original documentation of the observations made with the Dragon Machine in early 1945.

R.E. Malenfant

2005-08-12T23:59:59.000Z

268

All Electric Injection Molding Machines: How Much Energy Can You Save?  

E-Print Network (OSTI)

There are three basic types of injection molding machines (IMMs) currently on the market: hydraulic, all-electric, and hybrid. They each have a different way of driving machine processes. Hydraulic IMMs use hydraulic pumps, all-electric machines use only high-speed servo motors, and hybrid IMMs use a combination of hydraulic pumps and servo motors. It is widely accepted that all-electric IMMs are the most energy efficient of the three technologies. Surprisingly, available quantitative analysis of energy savings from all-electric IMMs is limited and much of it relies on manufacturer claims and limited real life performance data. Manufacturers and utility estimates of energy savings due to the installation of an all-electric injection molding machine are typically based solely on the type of IMM technology or the IMM technology type and throughput, also called the mass flow rate of production. This paper suggests that there are other factors that influence energy usage in addition to the mass flow rate, such as product type, product cycle time, injection temperature, clamping pressure requirement, screw length and clamping distance. This paper details the injection molding process and investigates specific factors that affect IMM energy usage and energy savings. Some all-electric injection molding manufacturers claim that the market for injection molding machinery will completely take over the plastic molding industry in North America. Do these quiet, clean, precise, repeatable, and energy-efficient, all-electrics be the new norm in North American plastic molding industry? Will hydraulic molding machines become extinct? If all-electric IMMs are not fifth generation, will they be able to deliver higher clamping force believed to be equivalent to the hydraulic machines? To what extent are hydraulic machines replaceable with all electric machines based on different applications? In this paper, we attempt to answer all the above questions. We will discuss the current market share of the different injection molding technologies. We will investigate the percentage utilization of the rated capacity of all three types of injection molding technology. We will address how the percentage utilization of all electric machines is comparable with the same capacity of hybrid and hydraulic machines. We will also assess the market potential of all three injection-molding technologies depending on their application, cost, capabilities and energy consumption. We will discuss the current market shares among hydraulic, hybrid and all-electric machines. Finally, we will also discuss the attitudinal and economic market barriers of acceptance of all-electric technologies.

Kanungo, A.; Swan, E.

2008-01-01T23:59:59.000Z

269

Control rod drive hydraulic system  

DOE Patents (OSTI)

A hydraulic system for a control rod drive (CRD) includes a variable output-pressure CR pump operable in a charging mode for providing pressurized fluid at a charging pressure, and in a normal mode for providing the pressurized fluid at a purge pressure, less than the charging pressure. Charging and purge lines are disposed in parallel flow between the CRD pump and the CRD. A hydraulic control unit is disposed in flow communication in the charging line and includes a scram accumulator. An isolation valve is provided in the charging line between the CRD pump and the scram accumulator. A controller is operatively connected to the CRD pump and the isolation valve and is effective for opening the isolation valve and operating the CRD pump in a charging mode for charging the scram accumulator, and closing the isolation valve and operating the CRD pump in a normal mode for providing to the CRD through the purge line the pressurized fluid at a purge pressure lower than the charging pressure.

Ose, Richard A. (San Jose, CA)

1992-01-01T23:59:59.000Z

270

Comparative Assessment of Direct Drive High Temperature Superconducting Generators in Multi-Megawatt Class Wind Turbines  

DOE Green Energy (OSTI)

This paper summarizes the work completed under the CRADA between NREL and American Superconductor (AMSC). The CRADA combined NREL and AMSC resources to benchmark high temperature superconducting direct drive (HTSDD) generator technology by integrating the technologies into a conceptual wind turbine design, and comparing the design to geared drive and permanent magnet direct drive (PMDD) wind turbine configurations. Analysis was accomplished by upgrading the NREL Wind Turbine Design Cost and Scaling Model to represent geared and PMDD turbines at machine ratings up to 10 MW and then comparing cost and mass figures of AMSC's HTSDD wind turbine designs to theoretical geared and PMDD turbine designs at 3.1, 6, and 10 MW sizes. Based on the cost and performance data supplied by AMSC, HTSDD technology has good potential to compete successfully as an alternative technology to PMDD and geared technology turbines in the multi megawatt classes. In addition, data suggests the economics of HTSDD turbines improve with increasing size, although several uncertainties remain for all machines in the 6 to 10 MW class.

Maples, B.; Hand, M.; Musial, W.

2010-10-01T23:59:59.000Z

271

Comparative Assessment of Direct Drive High Temperature Superconducting Generators in Multi-Megawatt Class Wind Turbines  

SciTech Connect

This paper summarizes the work completed under the CRADA between NREL and American Superconductor (AMSC). The CRADA combined NREL and AMSC resources to benchmark high temperature superconducting direct drive (HTSDD) generator technology by integrating the technologies into a conceptual wind turbine design, and comparing the design to geared drive and permanent magnet direct drive (PMDD) wind turbine configurations. Analysis was accomplished by upgrading the NREL Wind Turbine Design Cost and Scaling Model to represent geared and PMDD turbines at machine ratings up to 10 MW and then comparing cost and mass figures of AMSC's HTSDD wind turbine designs to theoretical geared and PMDD turbine designs at 3.1, 6, and 10 MW sizes. Based on the cost and performance data supplied by AMSC, HTSDD technology has good potential to compete successfully as an alternative technology to PMDD and geared technology turbines in the multi megawatt classes. In addition, data suggests the economics of HTSDD turbines improve with increasing size, although several uncertainties remain for all machines in the 6 to 10 MW class.

Maples, B.; Hand, M.; Musial, W.

2010-10-01T23:59:59.000Z

272

Hypervelocity cutting machine and method  

DOE Patents (OSTI)

A method and machine are provided for cutting a workpiece such as concrete. A gun barrel is provided for repetitively loading projectiles therein and is supplied with a pressurized propellant from a storage tank. A thermal storage tank is disposed between the propellant storage tank and the gun barrel for repetitively receiving and heating propellant charges which are released in the gun barrel for repetitively firing projectiles therefrom toward the workpiece. In a preferred embodiment, hypervelocity of the projectiles is obtained for cutting the concrete workpiece by fracturing thereof. 10 figs.

Powell, J.R.; Reich, M.

1996-11-12T23:59:59.000Z

273

Hypervelocity cutting machine and method  

DOE Patents (OSTI)

A method and machine 14 are provided for cutting a workpiece 12 such as concrete. A gun barrel 16 is provided for repetitively loading projectiles 22 therein and is supplied with a pressurized propellant from a storage tank 28. A thermal storage tank 32,32A is disposed between the propellant storage tank 28 and the gun barrel 16 for repetitively receiving and heating propellant charges which are released in the gun barrel 16 for repetitively firing projectiles 22 therefrom toward the workpiece 12. In a preferred embodiment, hypervelocity of the projectiles 22 is obtained for cutting the concrete workpiece 12 by fracturing thereof.

Powell, James R. (Shoreham, NY); Reich, Morris (Queens, NY)

1996-11-12T23:59:59.000Z

274

Free-piston cutting machine  

DOE Patents (OSTI)

A cutting machine includes a gun barrel for receiving a projectile. A compression tube is disposed in flow communication with the barrel and includes a piston therein. A reservoir is disposed in flow communication with the tube and receives a first gas under pressure. A second gas fills the compression tube on a front face of the piston. And, the pressurized first gas is discharged into the tube on a back face of the piston to accelerate the piston through the tube for compressing the second gas, and in turn launching the projectile through the barrel to impact a workpiece.

Ciccarelli, Gaby (East Setauket, NY); Subudhi, Manomohan (East Setauket, NY); Hall, Robert E. (Port Jefferson, NY)

2000-01-01T23:59:59.000Z

275

Micro-machined calorimetric biosensors  

DOE Patents (OSTI)

A method and apparatus are provided for detecting and monitoring micro-volumetric enthalpic changes caused by molecular reactions. Micro-machining techniques are used to create very small thermally isolated masses incorporating temperature-sensitive circuitry. The thermally isolated masses are provided with a molecular layer or coating, and the temperature-sensitive circuitry provides an indication when the molecules of the coating are involved in an enthalpic reaction. The thermally isolated masses may be provided singly or in arrays and, in the latter case, the molecular coatings may differ to provide qualitative and/or quantitative assays of a substance.

Doktycz, Mitchel J. (Knoxville, TN); Britton, Jr., Charles L. (Alcoa, TN); Smith, Stephen F. (Loudon, TN); Oden, Patrick I. (Plano, TX); Bryan, William L. (Knoxville, TN); Moore, James A. (Powell, TN); Thundat, Thomas G. (Knoxville, TN); Warmack, Robert J. (Knoxville, TN)

2002-01-01T23:59:59.000Z

276

An Assessment of High Performance AC Motor Drives Versus DC Motor Drives  

Science Conference Proceedings (OSTI)

In today's rapidly changing market place, drive users are applying AC and DC drives in applications that require more demanding speed and torque performance. Properly matching a drive's rating and unit characteristics to an application are two very effective ways of managing unit cost and cost reduction.

1998-12-29T23:59:59.000Z

277

DRIVE Analysis Tool Generates Custom Vehicle Drive Cycles Based on Real-World Data (Fact Sheet)  

DOE Green Energy (OSTI)

This fact sheet from the National Renewable Energy Laboratory describes the Drive-Cycle Rapid Investigation, Visualization, and Evaluation (DRIVE) analysis tool, which uses GPS and controller area network data to characterize vehicle operation and produce custom vehicle drive cycles, analyzing thousands of hours of data in a matter of minutes.

Not Available

2013-04-01T23:59:59.000Z

278

UCDavis University of California Learning By Driving  

E-Print Network (OSTI)

% 29% 0% 2% 10% 37% 39% 71% Solar Wind Hydro Nuclear Natural Gas Coal The electricity for charging fun with it. "I love the regenerative braking. In fact, I miss it when I drive my other cars." ­ Household 8 "It is like driving a slot car. It is exciting; it is as much fun as accelerating" ­ Survey

California at Davis, University of

279

Electric top drives gain wide industry acceptance  

Science Conference Proceedings (OSTI)

Since its introduction, the top drive drilling system has gained acceptance as a productive and safe method for drilling oil and gas wells. Originally, the system was used mostly for offshore and higher cost land drilling, and it had to be installed as a permanent installation because of its enormous weight and size. Essentially, a top drive replaces the kelly and rotary table as the means of rotating drillpipe on oil, gas and geothermal rigs and is considered to be 15% to 40% more efficient than a kelly drive. Top drive systems allow the operator to drill and maintain directional orientation for triple stands and provide tripping efficiency because of the ability to ream and circulate with triple stands, to reduce the risk of stuck pipe or lost wells, and to improve well control and pipe handling safety. The paper describes electric top drives with DC motors, top drives with AC motors, top drives with permanent magnet motors, and top drives with permanent magnet brushless synchronous motors.

Riahi, M.L.

1998-05-01T23:59:59.000Z

280

Monitoring charge storage processes in nanoscale oxides using electrochemical scanning probe microscopy.  

Science Conference Proceedings (OSTI)

Advances in electrochemical energy storage science require the development of new or the refinement of existing in situ probes that can be used to establish structure - activity relationships for technologically relevant materials. The drive to develop reversible, high capacity electrodes from nanoscale building blocks creates an additional requirement for high spatial resolution probes to yield information of local structural, compositional, and electronic property changes as a function of the storage state of a material. In this paper, we describe a method for deconstructing a lithium ion battery positive electrode into its basic constituents of ion insertion host particles and a carbon current collector. This model system is then probed in an electrochemical environment using a combination of atomic force microscopy and tunneling spectroscopy to correlate local activity with morphological and electronic configurational changes. Cubic spinel Li{sub 1+x}Mn{sub 2-x}O{sub 4} nanoparticles are grown on graphite surfaces using vacuum deposition methods. The structure and composition of these particles are determined using transmission electron microscopy and Auger microprobe analysis. The response of these particles to initial de-lithiation, along with subsequent electrochemical cycling, is tracked using scanning probe microscopy techniques in polar aprotic electrolytes (lithium hexafluorophosphate in ethylene carbonate:diethylcarbonate). The relationship between nanoparticle size and reversible ion insertion activity will be a specific focus of this paper.

Zavadil, Kevin Robert; Lu, Ping; Huang, Jian Yu

2010-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Spectroscopic ellipsometry of electrochemical precipitation and oxidation  

NLE Websites -- All DOE Office Websites (Extended Search)

Spectroscopic ellipsometry of electrochemical precipitation and oxidation Spectroscopic ellipsometry of electrochemical precipitation and oxidation of nickel hydroxide films Title Spectroscopic ellipsometry of electrochemical precipitation and oxidation of nickel hydroxide films Publication Type Journal Article Year of Publication 1998 Authors Kong, Fanping, Robert Kostecki, Frank R. McLarnon, and Rolf H. Muller Journal Thin Solid Films Volume 313-314 Pagination 775-780 Keywords effective medium approximation, electrochemical precipitation, inhomogeneous films, nickel hydroxide, spectroscopic ellipsometry Abstract In situ spectroscopic ellipsometry was used to investigate the electrochemical precipitation of nickel hydroxide films. By use of optical models for inhomogeneous films it was found that a specific precipitation current density produced the most compact and homogeneous film structures. The density of nickel hydroxide films was derived to be 1.25-1.50 g/cm3. The redox behavior of precipitated nickel hydroxide films was studied with an effective-medium optical model. Incomplete conversion to nickel oxyhydroxide and a reduction in film thickness were found during the oxidation cycle.

282

Methods, systems and apparatus for controlling operation of two alternating current (AC) machines  

SciTech Connect

A system is provided for controlling two AC machines. The system comprises a DC input voltage source that provides a DC input voltage, a voltage boost command control module (VBCCM), a five-phase PWM inverter module coupled to the two AC machines, and a boost converter coupled to the inverter module and the DC input voltage source. The boost converter is designed to supply a new DC input voltage to the inverter module having a value that is greater than or equal to a value of the DC input voltage. The VBCCM generates a boost command signal (BCS) based on modulation indexes from the two AC machines. The BCS controls the boost converter such that the boost converter generates the new DC input voltage in response to the BCS. When the two AC machines require additional voltage that exceeds the DC input voltage required to meet a combined target mechanical power required by the two AC machines, the BCS controls the boost converter to drive the new DC input voltage generated by the boost converter to a value greater than the DC input voltage.

Gallegos-Lopez, Gabriel (Torrance, CA); Nagashima, James M. (Cerritos, CA); Perisic, Milun (Torrance, CA); Hiti, Silva (Redondo Beach, CA)

2012-02-14T23:59:59.000Z

283

Gas Mileage Tips - Driving More Efficiently  

NLE Websites -- All DOE Office Websites (Extended Search)

Driving More Efficiently Driving More Efficiently Personalize Fuel Prices Select the fuel type and enter your fuel price to personalize savings estimates. Regular Midgrade Premium Diesel E85 CNG LPG $ 3.33 /gal Save My Prices Use Default Prices Click "Save My Prices" to apply your prices to other pages, or click "Use Default Prices" use national average prices. Drive Sensibly frustrated driver Aggressive driving (speeding, rapid acceleration and braking) wastes gas. It can lower your gas mileage by 33% at highway speeds and by 5% around town. Sensible driving is also safer for you and others, so you may save more than gas money. Fuel Economy Benefit: 5%-33% Equivalent Gasoline Savings: $0.17-$1.10/gallon Observe the Speed Limit (New Information) Graph showing MPG decreases rapidly at speeds above 50 mph

284

Electrifying Your Drive | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electrifying Your Drive Electrifying Your Drive Electrifying Your Drive April 27, 2010 - 7:30am Addthis Shannon Brescher Shea Communications Manager, Clean Cities Program For anyone who grew up watching The Jetsons (or Back to the Future, depending on your generation), the "Car of the Future!" flew through the skies with the greatest of ease. Although most of us have given up on our hopes of a flying car, anything beyond the internal combustion engine has seemed hopelessly out of reach until recently. However, with several manufacturers planning on producing plug-in and all-electric vehicles, the Car of the Future will be available soon! But before you put down a deposit, it's helpful to understand the different types of electric drive technologies. The most basic form of electric drive

285

Electrifying Your Drive | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electrifying Your Drive Electrifying Your Drive Electrifying Your Drive April 27, 2010 - 7:30am Addthis Shannon Brescher Shea Communications Manager, Clean Cities Program For anyone who grew up watching The Jetsons (or Back to the Future, depending on your generation), the "Car of the Future!" flew through the skies with the greatest of ease. Although most of us have given up on our hopes of a flying car, anything beyond the internal combustion engine has seemed hopelessly out of reach until recently. However, with several manufacturers planning on producing plug-in and all-electric vehicles, the Car of the Future will be available soon! But before you put down a deposit, it's helpful to understand the different types of electric drive technologies. The most basic form of electric drive

286

Rapid Response Small Machining NNR Project 703025  

SciTech Connect

This project was an effort to develop a machining area for small sized parts that is capable of delivering product with a quick response time. This entailed focusing efforts on leaning out specific work cells that would result in overall improvement to the entire machining area. This effort involved securing the most efficient available technologies for these areas. In the end, this incorporated preparing the small machining area for transformation to a new facility.

Kanies, Tim

2008-12-05T23:59:59.000Z

287

Machine and Beam Delivery Updates  

NLE Websites -- All DOE Office Websites (Extended Search)

MAchine and Beam delivery Updates FY13 MAchine and Beam delivery Updates FY13 Summary of Beam Delivery: FACET Summary Feb_15_22.pdf FACET Summary Feb_15_22.pdf FACET Summary Feb_23_Mar_1.pdf FACET Summary Feb_23_Mar_1.pdf FACET Summary Mar_2_8.pdf FACET Summary Mar_2_8.pdf FACET Summary Mar_9_15.pdf FACET Summary Mar_9_15.pdf FACET Summary Mar_16_22.pdf FACET Summary Mar_16_22.pdf FACET Summary Mar_23_29.pdf FACET Summary Mar_23_29.pdf FACET Summary Mar_30_Apr_5.pdf FACET Summary Mar_30_Apr_5.pdf FACET Summary Apr_6_12.pdf FACET Summary Apr_6_12.pdf FACET Summary Apr_27_May_3.pdf FACET Summary Apr_27_May_3.pdf FACET Summary May_4_10.pdf FACET Summary May_4_10.pdf Emittance Stability in Sector 2_31513.pdf Emittance Stability in Sector 2_31513.pdf FACET beam operations readiness with R56.pdf FACET beam operations readiness with R56.pdf (6/19/2013)

288

Micro-machined resonator oscillator  

DOE Patents (OSTI)

A micro-miniature resonator-oscillator is disclosed. Due to the miniaturization of the resonator-oscillator, oscillation frequencies of one MHz and higher are utilized. A thickness-mode quartz resonator housed in a micro-machined silicon package and operated as a telemetered sensor beacon'' that is, a digital, self-powered, remote, parameter measuring-transmitter in the FM-band. The resonator design uses trapped energy principles and temperature dependence methodology through crystal orientation control, with operation in the 20--100 MHz range. High volume batch-processing manufacturing is utilized, with package and resonator assembly at the wafer level. Unique design features include squeeze-film damping for robust vibration and shock performance, capacitive coupling through micro-machined diaphragms allowing resonator excitation at the package exterior, circuit integration and extremely small (0.1 in. square) dimensioning. A family of micro-miniature sensor beacons is also disclosed with widespread applications as bio-medical sensors, vehicle status monitors and high-volume animal identification and health sensors. The sensor family allows measurement of temperatures, chemicals, acceleration and pressure. A microphone and clock realization is also available. 21 figs.

Koehler, D.R.; Sniegowski, J.J.; Bivens, H.M.; Wessendorf, K.O.

1994-08-16T23:59:59.000Z

289

Micro-machined resonator oscillator  

DOE Patents (OSTI)

A micro-miniature resonator-oscillator is disclosed. Due to the miniaturization of the resonator-oscillator, oscillation frequencies of one MHz and higher are utilized. A thickness-mode quartz resonator housed in a micro-machined silicon package and operated as a "telemetered sensor beacon" that is, a digital, self-powered, remote, parameter measuring-transmitter in the FM-band. The resonator design uses trapped energy principles and temperature dependence methodology through crystal orientation control, with operation in the 20-100 MHz range. High volume batch-processing manufacturing is utilized, with package and resonator assembly at the wafer level. Unique design features include squeeze-film damping for robust vibration and shock performance, capacitive coupling through micro-machined diaphragms allowing resonator excitation at the package exterior, circuit integration and extremely small (0.1 in. square) dimensioning. A family of micro-miniature sensor beacons is also disclosed with widespread applications as bio-medical sensors, vehicle status monitors and high-volume animal identification and health sensors. The sensor family allows measurement of temperatures, chemicals, acceleration and pressure. A microphone and clock realization is also available.

Koehler, Dale R. (Albuquerque, NM); Sniegowski, Jeffry J. (Albuquerque, NM); Bivens, Hugh M. (Albuquerque, NM); Wessendorf, Kurt O. (Albuquerque, NM)

1994-01-01T23:59:59.000Z

290

Giner Electrochemicals Inc | Open Energy Information  

Open Energy Info (EERE)

Giner Electrochemicals Inc Giner Electrochemicals Inc Jump to: navigation, search Name Giner Electrochemicals Inc Place Newton, Massachusetts Zip 2466 Product Specializes in the development of fuel cell technologies and products. Coordinates 43.996685°, -87.803724° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.996685,"lon":-87.803724,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

291

MIT- Electrochemical Energy Laboratory | Open Energy Information  

Open Energy Info (EERE)

MIT- Electrochemical Energy Laboratory MIT- Electrochemical Energy Laboratory Jump to: navigation, search Name MIT- Electrochemical Energy Laboratory Address 77 Massachusetts Avenue Place Cambridge, Massachusetts Zip 02139 Region Greater Boston Area Coordinates 42.359089°, -71.093412° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.359089,"lon":-71.093412,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

292

Argonne Chemical Sciences & Engineering - Facilities - Electrochemical  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrochemical Analysis and Diagnostics Laboratory Electrochemical Analysis and Diagnostics Laboratory Panagiotis Prezas Argonne researcher Panagiotis Prezas prepares lithium-ion cells for evaluation. At the EADL, researchers can test everything from a quarter-sized coin cell to an 800-kilogram automotive battery pack. The Electrochemical Analysis and Diagnostics Laboratory (EADL) provides battery and fuel cell developers with reliable, independent, and unbiased performance evaluations of their cells, modules, and battery packs. These evaluations have been performed for the U.S. Department of Energy (DOE), government and industry consortia, and industrial developers to provide insight into the factors that limit the performance and life of advanced battery systems. Such evaluations help battery developers and DOE

293

Graphene to Graphane: Novel Electrochemical Conversion  

E-Print Network (OSTI)

A novel electrochemical means to generate atomic hydrogen, simplifying the synthesis and controllability of graphane formation on graphene is presented. High quality, vacuum grown epitaxial graphene (EG) was used as starting material for graphane conversion. A home-built electrochemical cell with Pt wire and exposed graphene as the anode and cathode, respectively, was used to attract H+ ions to react with the exposed graphene. Cyclic voltammetry of the cell revealed the potential of the conversion reaction as well as oxidation and reduction peaks, suggesting the possibility of electrochemically reversible hydrogenation. A sharp increase in D peak in the Raman spectra of EG, increase of D/G ratio, introduction of a peak at ~2930 cm-1 and respective peak shifts as well as a sharp increase in resistance showed the successful hydrogenation of EG. This conversion was distinguished from lattice damage by thermal reversal back to graphene at 1000{\\deg}C.

Daniels, Kevin M; Zhang, R; Chowdhury, I; Obe, A; Weidner, J; Williams, C; Sudarshan, T S; Chandrashekhar, MVS

2010-01-01T23:59:59.000Z

294

Single machine stochastic appointment sequencing and scheduling  

E-Print Network (OSTI)

linear combination of job waiting time, machine idle time, and overtime. .... Through straightforward but lengthy analysis we found finite values for M1 and M2.

295

Automated energy monitoring of machine tools  

E-Print Network (OSTI)

studies to correlate energy usage with the operations beinghas characterized machining energy usage solely based on theplanning, process energy usage was characterized solely by

Vijayaraghavan, Athulan; Dornfeld, David

2010-01-01T23:59:59.000Z

296

Automated energy monitoring of machine tools  

E-Print Network (OSTI)

Potential for Energy Consumption in Discrete Part Productionprocessing Reducing the energy consumption of machine toolsthis, monitoring of energy consumption patterns in the

Vijayaraghavan, Athulan; Dornfeld, David

2010-01-01T23:59:59.000Z

297

High pressure water jet mining machine  

DOE Patents (OSTI)

A high pressure water jet mining machine for the longwall mining of coal is described. The machine is generally in the shape of a plowshare and is advanced in the direction in which the coal is cut. The machine has mounted thereon a plurality of nozzle modules each containing a high pressure water jet nozzle disposed to oscillate in a particular plane. The nozzle modules are oriented to cut in vertical and horizontal planes on the leading edge of the machine and the coal so cut is cleaved off by the wedge-shaped body.

Barker, Clark R. (Rolla, MO)

1981-05-05T23:59:59.000Z

298

6.685 Electric Machines, Fall 2003  

E-Print Network (OSTI)

Treatment of electromechanical transducers, rotating and linear electric machines. Lumped-parameter electromechanics of interaction. Development of device characteristics: energy conversion density, efficiency; and of ...

Kirtley, James L.

299

A Novel Current Angle Control Scheme in a Current Source Inverter Fed Permanent Magnet Synchronous Motor Drive for Automotive Applications  

DOE Green Energy (OSTI)

This paper describes a novel speed control scheme to operate a current source inverter (CSI) driven surface-mounted permanent magnet synchronous machine (SPMSM) for hybrid electric vehicles (HEVs) applications. The idea is to use the angle of the current vector to regulate the rotor speed while keeping the two dc-dc converter power switches on all the time to boost system efficiency. The effectiveness of the proposed scheme was verified with a 3 kW CSI-SPMSM drive prototype.

Tang, Lixin [ORNL; Su, Gui-Jia [ORNL

2011-01-01T23:59:59.000Z

300

Electrochemical deposition of high purity silicon from molten fluoride ...  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, 2014 TMS Annual Meeting & Exhibition. Symposium , Solar Cell Silicon. Presentation Title, Electrochemical deposition of high purity ...

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Electrochemical detector integrated on microfabricated capillary electrophoresis chips  

DOE Patents (OSTI)

A microfabricated capillary electrophoresis chip which includes an integral thin film electrochemical detector for detecting molecules separated in the capillary.

Mathies, Richard A. (Moraga, CA); Glazer, Alexander N. (Orinda, CA); Lao, Kaiqin (San Francisco, CA); Woolley, Adam T. (Albany, CA)

1999-01-01T23:59:59.000Z

302

Electrochemical detector integrated on microfabricated capilliary electrophoresis chips  

DOE Patents (OSTI)

A microfabricated capillary electrophoresis chip which includes an integral thin film electrochemical detector for detecting molecules separated in the capillary.

Mathies, Richard A. (Moraga, CA); Glazer, Alexander N. (Orinda, CA); Woolley, Adam T. (Albany, CA); Lao, Kaigin (San Francisco, CA)

2000-01-01T23:59:59.000Z

303

Lithium based electrochemical cell systems having a degassing agent  

SciTech Connect

A lithium based electrochemical cell system includes a positive electrode; a negative electrode; an electrolyte; and a degassing agent.

Hyung, Yoo-Eup (Naperville, IL); Vissers, Donald R. (Naperville, IL); Amine, Khalil (Downers Grove, IL)

2012-05-01T23:59:59.000Z

304

A27: Electrochemical Study of Ag Ionization in Molten Lead ...  

Science Conference Proceedings (OSTI)

The concentration of Ag+ in the molten glass significantly increased with ... Electrochemical Deposition of High Purity Silicon in Molten Salts.

305

Heteroatom incorporated coke for electrochemical cell electrode  

DOE Patents (OSTI)

This invention relates to an electrode for a coke/alkali metal electrochemical cell comprising: (a) calcined coke particles: (i) that contain at least 0.5 weight percent of nitrogen heteroatoms and at least 1.0 weight percent sulfur heteroatoms, and (ii) that have an average particle size from 2 microns to 40 microns with essentially no particles being greater than 50 microns. (b) a binder This invention also relates to a coke/alkali metal electrochemical cell comprising: (a) an electrode as described above, (b) a non-aqueous electrolytic solution comprising an organic aprotic solvent and an electrically conductive salt, and (c) a counterelectrode.

Lewis, Irwin Charles (Strongsville, OH); Greinke, Ronald Alfred (Medina, OH)

1997-01-01T23:59:59.000Z

306

Heteroatom incorporated coke for electrochemical cell electrode  

DOE Patents (OSTI)

This invention relates to an electrode for a coke/alkali metal electrochemical cell comprising: (a) calcined coke particles: (1) that contain at least 0.5 weight percent of nitrogen heteroatoms and at least 1.0 weight percent sulfur heteroatoms, and (2) that have an average particle size from 2 microns to 40 microns with essentially no particles being greater than 50 microns and (b) a binder. This invention also relates to a coke/alkali metal electrochemical cell comprising: (a) an electrode as described above, (b) a non-aqueous electrolytic solution comprising an organic aprotic solvent and an electrically conductive salt, and (c) a counterelectrode. 5 figs.

Lewis, I.C.; Greinke, R.A.

1997-06-17T23:59:59.000Z

307

Alternative Fuels Data Center: Efficient Driving Behaviors to Conserve Fuel  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Efficient Driving Efficient Driving Behaviors to Conserve Fuel to someone by E-mail Share Alternative Fuels Data Center: Efficient Driving Behaviors to Conserve Fuel on Facebook Tweet about Alternative Fuels Data Center: Efficient Driving Behaviors to Conserve Fuel on Twitter Bookmark Alternative Fuels Data Center: Efficient Driving Behaviors to Conserve Fuel on Google Bookmark Alternative Fuels Data Center: Efficient Driving Behaviors to Conserve Fuel on Delicious Rank Alternative Fuels Data Center: Efficient Driving Behaviors to Conserve Fuel on Digg Find More places to share Alternative Fuels Data Center: Efficient Driving Behaviors to Conserve Fuel on AddThis.com... More in this section... Idle Reduction Parts & Equipment Maintenance Driving Behavior Management Strategies

308

Review: Virtual machine tools and virtual machining-A technological review  

Science Conference Proceedings (OSTI)

Virtual manufacturing systems provide a useful means for products to be manufactured 'right the first time' without the need of physical testing on the shop floor. Earlier research was mostly on developing a virtual manufacturing environment. Over the ... Keywords: Machining simulation, Virtual machine tool, Virtual machining, Virtual system

Aini Abdul Kadir; Xun Xu; Enrico Hämmerle

2011-06-01T23:59:59.000Z

309

Tabu search heuristic for two-machine flowshop with batch processing machines  

Science Conference Proceedings (OSTI)

Batch processing machines are frequently encountered in many industrial environments. A batch processing machine is one which can process several jobs simultaneously as a batch. The processing time of a batch is equal to the largest processing time of ... Keywords: Batch processing machines, Flowshop, MILP model, Tabu search

Li-Man Liao; Ching-Jen Huang

2011-04-01T23:59:59.000Z

310

A two-stage stochastic programming model for the parallel machine scheduling problem with machine capacity  

Science Conference Proceedings (OSTI)

This paper proposes a two-stage stochastic programming model for the parallel machine scheduling problem where the objective is to determine the machines' capacities that maximize the expected net profit of on-time jobs when the due dates are uncertain. ... Keywords: Average sample approximation, Parallel machine scheduling, Ranking and selection, Stochastic programming, Weighted number of on-time jobs

Talal Al-Khamis; Rym M'Hallah

2011-12-01T23:59:59.000Z

311

Control rod drive for reactor shutdown  

DOE Patents (OSTI)

A means for rapidly shutting down or scramming a nuclear reactor, such as a liquid metal-cooled fast breeder reactor, and serves as a backup to the primary shutdown system. The control rod drive consists basically of an in-core assembly, a drive shaft and seal assembly, and a control drive mechanism. The control rod is driven into the core region of the reactor by gravity and hydraulic pressure forces supplied by the reactor coolant, thus assuring that common mode failures will not interfere with or prohibit scramming the reactor when necessary.

McKeehan, Ernest R. (Los Gatos, CA); Shawver, Bruce M. (San Jose, CA); Schiro, Donald J. (San Jose, CA); Taft, William E. (Los Gatos, CA)

1976-01-20T23:59:59.000Z

312

Control of Two Permanent Magnet Machines Using a Five-Leg Inverter for Automotive Applications  

SciTech Connect

This paper presents digital control schemes for control of two permanent magnet (PM) machines in an integrated traction and air-conditioning compressor drive system for automotive applications. The integrated drive system employs a five-leg inverter to power a three-phase traction PM motor and a two-phase compressor PM motor by tying the common terminal of the two-phase motor to the neutral point of the three-phase motor. Compared to a three-phase or a standalone two-phase inverter, it eliminates one phase leg and shares the control electronics between the two drives, thus significantly reducing the component count of the compressor drive. To demonstrate that the speed and torque of the two PM motors can be controlled independently, a control strategy was implemented in a digital signal processor, which includes a rotor flux field orientation based control (RFOC) for the three-phase motor, a similar RFOC and a position sensorless control in the brushless dc (BLDC) mode for the two-phase motor. Control implementation issues unique to a two-phase PM motor are also discussed. Test results with the three-phase motor running in the ac synchronous (ACS) mode while the two-phase motor either in the ACS or the BLDC mode are included to verify the independent speed and torque control capability of the integrated drive.

Su, Gui-Jia [ORNL; Tang, Lixin [ORNL; Huang, Xianghui [GE Global Research

2006-01-01T23:59:59.000Z

313

Development of a Direct Drive Permanent Magnet Generator for Small Wind Turbines  

SciTech Connect

In this program, TIAX performed the conceptual design and analysis of an innovative, modular, direct-drive permanent magnet generator (PMG) for use in small wind turbines that range in power rating from 25 kW to 100 kW. TIAX adapted an approach that has been successfully demonstrated in high volume consumer products such as direct-drive washing machines and portable generators. An electromagnetic model was created and the modular PMG design was compared to an illustrative non-modular design. The resulting projections show that the modular design can achieve significant reductions in size, weight, and manufacturing cost without compromising efficiency. Reducing generator size and weight can also lower the size and weight of other wind turbine components and hence their manufacturing cost.

Chertok, Allan; Hablanian, David; McTaggart, Paul; DOE Project Officer - Keith Bennett

2004-11-16T23:59:59.000Z

314

Nontraditional Machining of Dies and Molds  

Science Conference Proceedings (OSTI)

...instability (Ref 9, 10). When coupled with ultrafast controllers operating on 2 μs control loops and glass scales to directly measure the motion of the machines axes, linear motors enable EDM machines to react to process instabilities quickly, leading to increased process speed and decreased risk of...

315

Following directions using statistical machine translation  

Science Conference Proceedings (OSTI)

Mobile robots that interact with humans in an intuitive way must be able to follow directions provided by humans in unconstrained natural language. In this work we investigate how statistical machine translation techniques can be used to bridge the gap ... Keywords: human-robot interaction, instruction following, natural language, navigation, statistical machine translation

Cynthia Matuszek; Dieter Fox; Karl Koscher

2010-03-01T23:59:59.000Z

316

Bagging and Boosting statistical machine translation systems  

Science Conference Proceedings (OSTI)

In this article we address the issue of generating diversified translation systems from a single Statistical Machine Translation (SMT) engine for system combination. Unlike traditional approaches, we do not resort to multiple structurally different SMT ... Keywords: Ensemble learning, Statistical machine translation, System combination

Tong Xiao; Jingbo Zhu; Tongran Liu

2013-02-01T23:59:59.000Z

317

Quantum Cloning Machines and the Applications  

E-Print Network (OSTI)

No-cloning theorem is fundamental for quantum mechanics and for quantum information science that states an unknown quantum state cannot be cloned perfectly. However, we can try to clone a quantum state approximately with the optimal fidelity, or instead, we can try to clone it perfectly with the largest probability. Thus various quantum cloning machines have been designed for different quantum information protocols. Specifically, quantum cloning machines can be designed to analyze the security of quantum key distribution protocols such as BB84 protocol, six-state protocol, B92 protocol and their generalizations. Some well-known quantum cloning machines include universal quantum cloning machine, phase-covariant cloning machine, the asymmetric quantum cloning machine and the probabilistic quantum cloning machine etc. In the past years, much progress has been made in studying quantum cloning machines and their applications and implementations, both theoretically and experimentally. In this review, we will give a complete description of those important developments about quantum cloning and some related topics. On the other hand, this review is self-consistent, and in particular, we try to present some detailed formulations so that further study can be taken based on those results. In addition, this review also contains some new results, for example, the study of quantum retrodiction protocol.

Heng Fan; Yi-Nan Wang; Li Jing; Jie-Dong Yue; Han-Duo Shi; Yong-Liang Zhang; Liang-Zhu Mu

2013-01-14T23:59:59.000Z

318

Improving vehicle aeroacoustics using machine learning  

Science Conference Proceedings (OSTI)

This paper presents a new approach to improving the overall aeroacoustic comfort of a vehicle, an important feature of vehicle design. The traditional improvement process is extended to benefit extensively from machine learning, information retrieval ... Keywords: Aeroacoustics, Automobile industry, Machine learning, Noise frequency spectrum analysis, Process automation

Damjan Kunar; Martin Moina; Marina Giordanino; Ivan Bratko

2012-08-01T23:59:59.000Z

319

Comparison of crowdsourcing translation with Machine Translation  

Science Conference Proceedings (OSTI)

In this paper we examine the model of crowdsourcing for translation and compare it with Machine Translation (MT). The large volume of material to be translated, the translation of this material into many languages combined with tight deadlines lead enterprises ... Keywords: Machine Translation, crowdsourcing, empirical data, human translation, quality

Dimitra Anastasiou; Rajat Gupta

2011-12-01T23:59:59.000Z

320

Machine Translation Errors: English and Iraqi Arabic  

Science Conference Proceedings (OSTI)

Errors in machine translations of English-Iraqi Arabic dialogues were analyzed using the methods developed for the Human Translation Error Rate measure (HTER). Human annotations were used to refine the Translation Error Rate (TER) annotations. The analyses ... Keywords: Arabic, English, error analysis, evaluation, statistical machine translation

S. Condon; D. Parvaz; J. Aberdeen; C. Doran; A. Freeman; M. Awad

2011-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

A Machine Vision System for Inspecting Bearings  

Science Conference Proceedings (OSTI)

In this paper, we describe a machine vision system for inspecting bearings, which are an important part of electro-mechanical kWh meters. The system consists of a personal computer with a frame grabber, a black and white progressive scan CCD camera, ... Keywords: machine vision, quality control, bearing, eccentricity

2000-09-01T23:59:59.000Z

322

Image fusion for a nighttime driving display  

E-Print Network (OSTI)

An investigation into image fusion for a nighttime driving display application was performed. Most of the image fusion techniques being investigated in this application were developed for other purposes. When comparing the ...

Herrington, William Frederick

2005-01-01T23:59:59.000Z

323

Better Buildings Neighborhood Program: Driving Demand  

NLE Websites -- All DOE Office Websites (Extended Search)

even know they have. This section explains how you can use effective marketing to drive demand for energy upgrades in your community. Following the lead of many Better Buildings...

324

Direct drive wind turbine - Energy Innovation Portal  

A wind turbine is provided that minimizes the size of the drive train and nacelle while maintaining the power electronics and transformer at the top of the tower. The ...

325

Consider Steam Turbine Drives for Rotating Equipment  

SciTech Connect

This revised ITP tip sheet on steam turbine drives for rotating equipment provides how-to advice for improving the system using low-cost, proven practices and technologies.

2006-01-01T23:59:59.000Z

326

Driving Efficiencies Track | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Driving Efficiencies Track Driving Efficiencies Track Driving Efficiencies Track Driving Efficiencies Track Tuesday April 17, 2012 From E-Mail to "The Stream" by Don Burke Taking Records Inventory Into the 21st Century by Lorie A. Robb Engineering and Operations Control: Embrace the Culture by Cheryl Bolen IT Project Management Framework by Denise Hill Wednesday April 18, 2012 Records Warehouse Operations and Records Storage for External Customers by Karen Hatch Preservation of Long-Term Temporary Records by Jeanie Gueretta Mobile Initiatives Effecting Change at Hanford by Don Stewart DOE's CIO's EWA by Sarah Gamage, Don Schade and Alan Andon Green IT 2012: Sustainable Electronics by Edwin Luevanos and Jeff Eagan Thursday April 19, 2012 Document Management and Control System by Melissa Ruth

327

Argonne Chemical Sciences & Engineering - Publications - Electrochemical  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrochemical Energy Storage Electrochemical Energy Storage Basic Research S.-H. Kang and M. M. Thackeray, "Stabilization of xLi2MnO3·(1-x)LiMO2 Electrode Surfaces (M=Mn, Ni, Co) with Mildly Acidic, Fluorinated Solutions," Journal of the Electrochemical Society, 155, A269 (2008) C. S. Johnson, N. Li, C. Lefief, J. T. Vaughey and M. M. Thackeray, "Synthesis, Characterization and Electrochemistry of Lithium Battery Electrodes: xLi2MnO3*(1-x)LiMn0.333Ni0.333Co0.333O2 (0Electrochemical Society 155, A448 (2008)

328

Separator-spacer for electrochemical systems  

DOE Patents (OSTI)

An electrochemical cell construction features a novel co-extruded plastic electrode in an interleaved construction with a novel integral separator-spacer. Also featured is a leak and impact resistant construction for preventing the spill of corrosive materials in the event of rupture.

Grimes, Patrick G. (Westfield, NJ); Einstein, Harry (Springfield, NJ); Newby, Kenneth R. (Berkeley Heights, NJ); Bellows, Richard J. (Westfield, NJ)

1983-08-02T23:59:59.000Z

329

Method of constructing an improved electrochemical cell  

DOE Patents (OSTI)

An electrochemical cell construction features a novel co-extruded plastic electrode in an interleaved construction with a novel integral separator-spacer. Also featured is a leak and impact resistant construction for preventing the spill of corrosive materials in the event of rupture.

Grimes, Patrick G. (Westfield, NJ); Einstein, Harry (Springfield, NJ)

1984-10-09T23:59:59.000Z

330

Improved magnesium/manganese dioxide electrochemical cell  

SciTech Connect

A magnesium/manganese dioxide electrochemical cell, stored following partial usage, is improved by increasing the cathode moisture content at the time of making the cell to reduce the self-discharge and increase the operating capacity after the cell has been stored following partial usage.

Jarvis, L.P.; Brundage, M.T.; Atwater, T.B.

1988-11-10T23:59:59.000Z

331

Gas recombination assembly for electrochemical cells  

DOE Patents (OSTI)

An assembly for recombining gases generated in electrochemical cells wherein a catalyst strip is enveloped within a hydrophobic, gas-porous film which, in turn, is encased between gas-porous, metallic layers. The sandwich construction of metallic layers and film is formed into a spiral with a tab for connection to the cell.

Levy, Isaac (New Fairfield, CT); Charkey, Allen (Brookfield, CT)

1989-01-01T23:59:59.000Z

332

Titanium Carbide Bipolar Plate for Electrochemical Devices  

DOE Patents (OSTI)

Titanium carbide comprises a corrosion resistant, electrically conductive, non-porous bipolar plate for use in an electrochemical device. The process involves blending titanium carbide powder with a suitable binder material, and molding the mixture, at an elevated temperature and pressure.

LaConti, Anthony B.; Griffith, Arthur E.; Cropley, Cecelia C.; Kosek, John A.

1998-05-08T23:59:59.000Z

333

Argonne Chemical Sciences & Engineering -Electrochemical Energy Storage -  

NLE Websites -- All DOE Office Websites (Extended Search)

Basic Research Basic Research * Members * Contact * Publications * Overview * CEES EES Home Electrochemical Energy Storage - Basic Research Electrochemical Energy Storage Chemistry co-op student Sara Busking loads a lithium-ion battery cell in a pouch into a test oven to evaluate its electrochemical performance. EES conducts basic research to support its applied electrochemical energy storage R&D initiatives. EES also leads an Energy Frontier Research Center (EFRC), recently awarded by DOE's Office of Science, with partners at Northwestern University and the University of Illinois (Urbana Champaign). The EFRC, the Center for Electrical Energy Storage: Tailored Interfaces (CEES), focuses on understanding electrochemical phenomena at electrode/electrolyte interfaces

334

Frequency modulation drive for a piezoelectric motor  

DOE Patents (OSTI)

A piezoelectric motor has peak performance at a specific frequency f.sub.1 that may vary over a range of frequencies. A drive system is disclosed for operating such a motor at peak performance without feedback. The drive system consists of the motor and an ac source connected to power the motor, the ac source repeatedly generating a frequency over a range from f.sub.1 -.DELTA.x to f.sub.1 +.DELTA.y.

Mittas, Anthony (Albuquerque, NM)

2001-01-01T23:59:59.000Z

335

10MW Class Direct Drive HTS Wind Turbine: Cooperative Research and Development Final Report, CRADA Number CRD-08-00312  

DOE Green Energy (OSTI)

This paper summarizes the work completed under the CRADA between NREL and American Superconductor (AMSC). The CRADA combined NREL and AMSC resources to benchmark high temperature superconducting direct drive (HTSDD) generator technology by integrating the technologies into a conceptual wind turbine design, and comparing the design to geared drive and permanent magnet direct drive (PMDD) wind turbine configurations. Analysis was accomplished by upgrading the NREL Wind Turbine Design Cost and Scaling Model to represent geared and PMDD turbines at machine ratings up to 10 MW and then comparing cost and mass figures of AMSC's HTSDD wind turbine designs to theoretical geared and PMDD turbine designs at 3.1, 6, and 10 MW sizes.

Musial, W.

2011-05-01T23:59:59.000Z

336

10MW Class Direct Drive HTS Wind Turbine: Cooperative Research and Development Final Report, CRADA Number CRD-08-00312  

SciTech Connect

This paper summarizes the work completed under the CRADA between NREL and American Superconductor (AMSC). The CRADA combined NREL and AMSC resources to benchmark high temperature superconducting direct drive (HTSDD) generator technology by integrating the technologies into a conceptual wind turbine design, and comparing the design to geared drive and permanent magnet direct drive (PMDD) wind turbine configurations. Analysis was accomplished by upgrading the NREL Wind Turbine Design Cost and Scaling Model to represent geared and PMDD turbines at machine ratings up to 10 MW and then comparing cost and mass figures of AMSC's HTSDD wind turbine designs to theoretical geared and PMDD turbine designs at 3.1, 6, and 10 MW sizes.

Musial, W.

2011-05-01T23:59:59.000Z

337

Using artificially generated data to evaluate statistical machine translation  

Science Conference Proceedings (OSTI)

Although Statistical Machine Translation (SMT) is now the dominant paradigm within Machine Translation, we argue that it is far from clear that it can outperform Rule-Based Machine Translation (RBMT) on small- to medium-vocabulary applications where ...

Manny Rayner; Paula Estrella; Pierrette Bouillon; Beth Ann Hockey; Yukie Nakao

2009-08-01T23:59:59.000Z

338

A hybrid type small 5-axis CNC milling machine  

E-Print Network (OSTI)

5-axis CNC milling machines are important in a number of industries ranging from aerospace to consumer-die-mold machining because they can deliver high machining accuracy with a spindle tilting capacity. Most of these ...

Son, Seung-Kil, 1964-

2002-01-01T23:59:59.000Z

339

Energy Department Announces $60 Million to Drive Affordable,...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

60 Million to Drive Affordable, Efficient Solar Power Energy Department Announces 60 Million to Drive Affordable, Efficient Solar Power October 22, 2013 - 11:45am Addthis News...

340

Energy Department Announces $60 Million to Drive Affordable,...  

NLE Websites -- All DOE Office Websites (Extended Search)

0 Million to Drive Affordable, Efficient Solar Power Energy Department Announces 60 Million to Drive Affordable, Efficient Solar Power October 22, 2013 - 11:45am Addthis News...

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Microsoft Word - Compare Driving Styles_ ETEC Hymotion Prius...  

NLE Websites -- All DOE Office Websites (Extended Search)

Driving intensity is the energy at the wheels used for propulsion. Recaptured energy through regenerative braking is not considered when calculating driving intensity....

342

The Transportation Leapfrog: Using Smart Phones to Collect Driving...  

NLE Websites -- All DOE Office Websites (Extended Search)

Transportation Leapfrog: Using Smart Phones to Collect Driving Data and Model Fuel Economy in India Title The Transportation Leapfrog: Using Smart Phones to Collect Driving Data...

343

PHEV and Other Electric Drive Testing Results and Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Vehicle Testing Activity PHEV and Other Electric Drive Testing Results and Resources Jim Francfort Electric Drive Session Alternative Fuels & Vehicles Las Vegas, Nevada -...

344

Energy Department Invests to Drive Down Costs of Carbon Capture...  

NLE Websites -- All DOE Office Websites (Extended Search)

to Drive Down Costs of Carbon Capture, Support Reductions in Greenhouse Gas Pollution Energy Department Invests to Drive Down Costs of Carbon Capture, Support Reductions in...

345

Secretary Moniz Announces New Biofuels Projects to Drive Cost...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Announces New Biofuels Projects to Drive Cost Reductions, Technological Breakthroughs Secretary Moniz Announces New Biofuels Projects to Drive Cost Reductions, Technological...

346

DOE - Office of Legacy Management -- La Pointe Machine and Tool...  

Office of Legacy Management (LM)

La Pointe Machine and Tool Co - MA 16 FUSRAP Considered Sites Site: LA POINTE MACHINE AND TOOL CO. (MA.16 ) Eliminated from consideration under FUSRAP Designated Name: Not...

347

Electric machine for hybrid motor vehicle - Energy Innovation ...  

A power system for a motor vehicle having an internal combustion engine and an electric machine is disclosed. The electric machine has a stator, a permanent magnet ...

348

John Hsu, Oak Ridge National Laboratory, Flux Coupling Machines...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Flux Coupling Machines and Switched Reluctance Motors to Replace Permanent Magnets in Electric Vehicles John Hsu, Oak Ridge National Laboratory, Flux Coupling Machines and...

349

Hybrid MPI/OpenMP parallel support vector machine training  

E-Print Network (OSTI)

Jan 6, 2009 ... Support Vector Machines are a powerful machine learning technol- ..... to the precision recall curve were evaluated on the Challenge web-.

350

Multi-winding homopolar electric machine - Energy Innovation Portal  

A multi-winding homopolar electric machine and method for converting between mechanical energy and electrical energy. The electric machine includes a shaft defining ...

351

Ultraprecision machining of optics at Los Alamos  

Science Conference Proceedings (OSTI)

Ultraprecision machine tools are used at Los Alamos for single point diamond turning of optics and other precision parts. Measurements of a 50-mm-dia copper flat are used to illustrate the quality of a part which can be machined on the Moore No. 3 lathe. Measurements of a 0.4-m-dia aluminum mirror with a 20-m radius-of-curvature are presented as an example of a part machined on the Moore No. 5 lathe. A varying frequency sine wave grating is used to show a type of special optical grating which can be produced using the Pneumo lathe.

Rhorer, R.L.; Gauler, A.L.; Colston, E.W.; Ruhe, J.R.

1981-01-01T23:59:59.000Z

352

Electric machine for hybrid motor vehicle  

DOE Patents (OSTI)

A power system for a motor vehicle having an internal combustion engine and an electric machine is disclosed. The electric machine has a stator, a permanent magnet rotor, an uncluttered rotor spaced from the permanent magnet rotor, and at least one secondary core assembly. The power system also has a gearing arrangement for coupling the internal combustion engine to wheels on the vehicle thereby providing a means for the electric machine to both power assist and brake in relation to the output of the internal combustion engine.

Hsu, John Sheungchun (Oak Ridge, TN)

2007-09-18T23:59:59.000Z

353

Portable top drive cuts horizontal drilling costs  

SciTech Connect

Economic analysis of a seven-well, long-reach horizontal drilling program into an unconsolidated, heavy-oil-bearing reservoir in Winter field near the Alberta/Saskatchewan border in Canada reveals that -- in the right application -- renting a portable top drive drilling system can reduce total drilling costs. Use of the portable top drive combined with other cost-saving measures enabled Saskoil, one of Canada`s larger independents, to drill more cheaply, on a cost-per-meter basis, in 1993 than in 1992. This was despite significant rental rates for drilling rigs and directional drilling services caused by increased demand in Western Canada. Total cost savings of 10% on wells that would otherwise cost in the (C) $500,000 range are believed realistic. Based on this year`s performance, Saskoil recommends top drive for the company`s future horizontal wells in this area. This article describes the operator`s horizontal well program, advantages of top drive in that program and how it was installed and applied. Estimated time savings for six wells, plus other ways top drive can cut costs and improve operations are discussed.

Jackson, B. [Saskoil, Regina, Saskatchewan (Canada); Yager, D. [Tesco Drilling Tech., Calgary, Alberta (Canada)

1993-11-01T23:59:59.000Z

354

Effect of Side Permanent Magnets for Reluctance Interior Permanent Magnet Reluctance Machines  

Science Conference Proceedings (OSTI)

A traditional electric machine uses two dimensional magnetic flux paths in its rotor. This paper presents the development work on the utilization of the third dimension of a rotor. As an example, the air gap flux of a radial gap interior permanent magnet motor can be significantly enhanced by additional permanent magnets (PM) mounted at the sides of the rotor. A prototype motor built with this concept provided higher efficiency and required a shorter stator core length for the same power output as the Toyota/Prius traction drive motor.

Hsu, John S [ORNL; Lee, Seong T [ORNL; Wiles, Randy H [ORNL; Coomer, Chester [ORNL; Lowe, Kirk T [ORNL

2007-01-01T23:59:59.000Z

355

Objective methods of assessment of influence of alcohol on driving safety: study performed driving simulators  

Science Conference Proceedings (OSTI)

The paper is focused on an introduction of a set of experiments focused on objective methods used for detection of driving impairment caused by influence of different level of alcohol in blood. It introduces the initial experiments which were performed ... Keywords: alcohol, driver's impairment, driving simulation

Roman Piekník; Stanislav Novotny; Petr Bouchner

2007-09-01T23:59:59.000Z

356

Rechargeable Batteries, Photochromics, Electrochemical Lithography: From  

NLE Websites -- All DOE Office Websites (Extended Search)

Rechargeable Batteries, Photochromics, Electrochemical Lithography: From Rechargeable Batteries, Photochromics, Electrochemical Lithography: From Interfacial Studies to Practical Applications Speaker(s): Robert Kostecki Date: January 11, 2001 - 12:00pm Location: Bldg 90 Seminar Host/Point of Contact: Satkartar K. Kinney The constantly growing power requirements of portable electronic devices and the need for high-power batteries for electric vehicles have created a strong demand for new batteries or substantial improvements of existing ones. Fundamental problems associated with complex interfacial processes in batteries must be resolved to enhance battery performance and lifetime. An overview of the principles of electrode-electrolyte interfacial studies, experimental methods, recent results, and potential applications will be presented. Advanced instrumental techniques and

357

Application of ion implantation to electrochemical studies  

DOE Green Energy (OSTI)

The application of ion implantation to electrochemical studies is illustrated with a study of electrocatalysis of the chlorine evolution reaction at RuO{sub 2}, IrO{sub 2}, TiO{sub 2} mixed oxide anodes in chloride solutions. Electrode/solution interfaces of well defined catalyst composition are generated in a reproducible manner by implantation of Ru (or Ir) into Ti followed by in situ oxidation of the near surface titanium alloys. Ion implantation enables the tailoring on an atomic scale of an electrochemical interface. Analysis by Rutherford backscattering adds the ability of quantitative mechanistic study in terms of actual ion concentration at the interface. In addition, ion implantation, as a processing technique, creates new materials with improved properties which may have future practical use in catalytic materials.

Vallet, C.E.; White, C.W.

1990-01-01T23:59:59.000Z

358

Machine Partitions | Argonne Leadership Computing Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

BG/Q Drivers Status Machine Overview Machine Partitions Torus Network Data Storage & File Systems Compiling & Linking Queueing & Running Jobs Data Transfer Debugging & Profiling Performance Tools & APIs Software & Libraries IBM References Intrepid/Challenger/Surveyor Tukey Eureka / Gadzooks Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Machine Partitions Mira As our production machine, the queues on Mira are very similar to those on our BG/P system Intrepid. In the prod-capability queue, partition sizes of 8192, 12288, 16384, 32768, and 49152 nodes are available. All partitions have a full torus network. The max runtime of jobs submitted to the

359

Computational aesthetic evaluation: steps towards machine creativity  

Science Conference Proceedings (OSTI)

Programmer and artists have invented a broad range of generative systems that create art and music. These powerful systems sometimes produce results that surprise their human collaborators, but the surprises are not always welcome or useful. Machine ...

Philip Galanter

2012-08-01T23:59:59.000Z

360

Machine Learning for Sequential Data: A Review  

Science Conference Proceedings (OSTI)

Statistical learning problems in many fields involve sequential data. This paper formalizes the principal learning tasks and describes the methods that have been developed within the machine learning research community for addressing these problems. ...

Thomas G. Dietterich

2002-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Machine translation system combination by confusion forest  

Science Conference Proceedings (OSTI)

The state-of-the-art system combination method for machine translation (MT) is based on confusion networks constructed by aligning hypotheses with regard to word similarities. We introduce a novel system combination framework in which hypotheses are ...

Taro Watanabe; Eiichiro Sumita

2011-06-01T23:59:59.000Z

362

March 8, 2006: Sandia's Z Machine  

Energy.gov (U.S. Department of Energy (DOE))

March 8, 2006The Department's Sandia National Laboratories announces that its Z machine has produced plasmas that exceed temperatures of 2 billion degrees Kelvin-hotter than the interiors of stars....

363

An environment machine for the ??-calculus  

Science Conference Proceedings (OSTI)

We introduce a natural deduction-like formalisation of Parigot's ??-calculus. From this, we derive an environment machine that allows any well-typed ??-term to be reduced to its weak head normal form. The soundness and completeness ...

Philippe De Groote

1998-12-01T23:59:59.000Z

364

Machine Status | Argonne Leadership Computing Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

Machine Status Science on Mira Cores Core Hours Atomistic Simulations of Nanoscale Oxides and Oxide Interfaces 65536 1297201.9256901 Lattice QCD 16384 28881.396622179 MockBOSS :...

365

CCG supertags in factored statistical machine translation  

Science Conference Proceedings (OSTI)

Combinatorial Categorial Grammar (CCG) supertags present phrase-based machine translation with an opportunity to access rich syntactic information at a word level. The challenge is incorporating this information into the translation process. Factored ...

Alexandra Birch; Miles Osborne; Philipp Koehn

2007-06-01T23:59:59.000Z

366

Revisiting parallel rendering for shared memory machines  

Science Conference Proceedings (OSTI)

Increasing the core count of CPUs to increase computational performance has been a significant trend for the better part of a decade. This has led to an unprecedented availability of large shared memory machines. Programming paradigms and systems are ...

B. Nouanesengsy; J. Ahrens; J. Woodring; H. Shen

2011-04-01T23:59:59.000Z

367

A machine learning system for recognizing subclasses  

Science Conference Proceedings (OSTI)

Thematic information extraction from remote sensing images is a complex task. In this demonstration, we present *Miner machine learning system. In particular, we demonstrate an advanced subclass recognition algorithm that is specifically designed to ...

Ranga Raju Vatsavai

2012-07-01T23:59:59.000Z

368

Virtualisation: Real security for virtual machines  

Science Conference Proceedings (OSTI)

Server virtualisation offers many real benefits to enterprises, maximising hardware resources and providing significant cost and energy savings. But there is a downside: all of the security issues we battle on networked systems also plague virtual machines, ...

Ulf Mattsson

2009-04-01T23:59:59.000Z

369

DistributionDrive | Open Energy Information  

Open Energy Info (EERE)

DistributionDrive DistributionDrive Jump to: navigation, search Name DistributionDrive Place Addison, Texas Zip 75001 Product Supplier of Biodiesel, Straight Vegetable Oil (SVO), Recycled Vegetable Oil (WVO) and Engine Conversion Kits to use this fuels. Coordinates 38.477365°, -80.412149° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":38.477365,"lon":-80.412149,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

370

Drive Less, Save More | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Drive Less, Save More Drive Less, Save More Drive Less, Save More May 24, 2011 - 12:31pm Addthis Shannon Brescher Shea Communications Manager, Clean Cities Program For someone who works in the Vehicle Technologies Program, I actually don't spend that much time in my automobile. I usually get around using a combination of public transit, my bike, and my own two feet. But I'm an exception. In the U.S., the vehicle miles travelled per person is actually twice as high as it is in Western Europe and three times higher than in Japan. However, alternatives to using your car have a wealth of benefits. In addition to reducing petroleum consumption, they can lower greenhouse gas emissions, improve air quality, decrease stress, and bring communities together. Fortunately, there are a variety of ways to minimize the distance

371

Drive Less, Save More | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Drive Less, Save More Drive Less, Save More Drive Less, Save More May 24, 2011 - 12:31pm Addthis Shannon Brescher Shea Communications Manager, Clean Cities Program For someone who works in the Vehicle Technologies Program, I actually don't spend that much time in my automobile. I usually get around using a combination of public transit, my bike, and my own two feet. But I'm an exception. In the U.S., the vehicle miles travelled per person is actually twice as high as it is in Western Europe and three times higher than in Japan. However, alternatives to using your car have a wealth of benefits. In addition to reducing petroleum consumption, they can lower greenhouse gas emissions, improve air quality, decrease stress, and bring communities together. Fortunately, there are a variety of ways to minimize the distance

372

Electrochemically controlled charging circuit for storage batteries  

DOE Patents (OSTI)

An electrochemically controlled charging circuit for charging storage batteries is disclosed. The embodiments disclosed utilize dc amplification of battery control current to minimize total energy expended for charging storage batteries to a preset voltage level. The circuits allow for selection of Zener diodes having a wide range of reference voltage levels. Also, the preset voltage level to which the storage batteries are charged can be varied over a wide range.

Onstott, E.I.

1980-06-24T23:59:59.000Z

373

Electrochemical sensor/detector system and method  

DOE Patents (OSTI)

An electrochemical detection system is described comprising in combination: (a) a multielement, microelectrode array detector containing means for acquiring a plurality of signals; (b) electronic means for receiving said signals and converting said signals into a readout or display providing information with respect to the nature and concentration of elements present in a solution being tested. Also described is the means of making the above described microelectrode detector.

Glass, R.S.; Perone, S.P.; Ciarlo, D.R.; Kimmons, J.F.

1992-12-31T23:59:59.000Z

374

ELECTROCHEMICAL DECONTAMINATION AND RECOVERY OF URANIUM VALUES  

DOE Patents (OSTI)

An electrochemical process is described for separating uranium from fission products. The method comprises subjecting the mass of uranium to anodic dissolution in an electrolytic cell containing aqueous alkali bicarbonate solution as its electrolyte, thereby promoting a settling from the solution of a solid sludge from about the electrodes and separating the resulting electrolyte solution containing the anodically dissolved uranium from the sludge which contains the rare earth fission products.

McLaren, J.A.; Goode, J.H.

1958-05-13T23:59:59.000Z

375

Chemical engineering challenges in driving thermochemical hydrogen processes with the tandem mirror reactor  

DOE Green Energy (OSTI)

The Tandem Mirror Reactor is described and compared with Tokamaks, both from a basic physics viewpoint and from the suitability of the respective reactor for synfuel production. Differences and similarities between the TMR as an electricity producer or a synfuel producer are also cited. The Thermochemical cycle chosen to link with the fusion energy source is the General Atomic Sulfur-Iodine Cycle, which is a purely thermal-driven process with no electrochemical steps. There are real chemical engineering challenges of getting this high quality heat into the large thermochemical plant in an efficient manner. We illustrate with some of our approaches to providing process heat via liquid sodium to drive a 1050 K, highly-endothermic, catalytic and fluidized-bed SO/sub 3/ Decomposition Reactor. The technical, economic, and safety tradeoffs that arise are discussed.

Galloway, T.R.; Werner, R.W.

1980-01-01T23:59:59.000Z

376

DESIGN FOR AN AUTOGRAPHICALLY RECORDING TENSILE MACHINE  

SciTech Connect

An improved "hard" type tensile machine is described, designed primarily for metallurgical usage. Compactness and mechanical simplicity are combined with maximum accessibility of the load measuring device and specimen, and the load is measured with an electro-mechanical dynamometer which is easily adapted into a system for autographically recording ihe load-elongaticn curve. The machine should be particularly useful for dry-box or hot-cell work. (auth)

Adams, M.A.

1959-10-01T23:59:59.000Z

377

Sealed joint structure for electrochemical device  

DOE Patents (OSTI)

Several members make up a joint in a high-temperature electrochemical device, wherein the various members perform different functions. The joint is useful for joining multiple cells (generally tubular modules) of an electrochemical device to produce a multi-cell segment-in-series stack for a solid oxide fuel cell, for instance. The joint includes sections that bond the joining members to each other; one or more seal sections that provide gas-tightness, and sections providing electrical connection and/or electrical insulation between the various joining members. A suitable joint configuration for an electrochemical device has a metal joint housing, a first porous electrode, a second porous electrode, separated from the first porous electrode by a solid electrolyte, and an insulating member disposed between the metal joint housing and the electrolyte and second electrode. One or more brazes structurally and electrically connects the first electrode to the metal joint housing and forms a gas tight seal between the first electrode and the second electrode.

Tucker, Michael C; Jacobson, Craig P; De Jonghe, Lutgard C; Visco, Steven J

2013-05-21T23:59:59.000Z

378

Evaluation of SAFT America, Inc. electrochemical capacitors  

DOE Green Energy (OSTI)

The electrochemical capacitor devices described in this report were deliverables from Lawrence Berkeley National Laboratory (LBNL), Contract No. 4606510 with SAFT America, Inc., as part of LBNL`s exploratory research program. Dr. Kimio Kinoshita is the Program Manager at LBNL. The contract was in support of the US Department of Energy`s (DOE) exploratory electrochemical energy storage program which includes development projects for a wide variety of advanced high-energy/high-power energy storage systems for electric and hybrid vehicle programs. The DOE is currently developing various electrochemical capacitors as candidate power assist devices for the Partnership for a New Generation of Vehicles (PNGV) fast-response engine requirements. The LBNL contract with SAFT America, Inc., was intended to evaluate various activated carbon-based electrode formulations and develop an electrical model of the double-layer capacitor. The goal is to design and deliver prototypes meeting the DOE requirement of > 1,000 W/kg, 16 Wh/kg. Deliverables were sent to the INEEL EST laboratory for independent testing and evaluation. The following report describes performance testing on ten devices received September 2, 1996. Due to the initial performance of these early devices, life-cycle testing was not conducted. Additional devices, with improved performance, are expected to be tested. Future results will be reported in a follow-on report.

Wright, R.B.; Murphy, T.C.

1997-12-01T23:59:59.000Z

379

Microsoft Word - ORNL Hard Drives Final 08132010  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Inspections and Special Inquires Inspections and Special Inquires Inspection Report Internal Controls over Computer Hard Drives at the Oak Ridge National Laboratory INS-O-10-03 August 2010 Department of Energy Washington, DC 20585 August 16, 2010 MEMORANDUM FOR THE DIRECTOR, OFFICE OF SCIENCE FROM: Sandra D. Bruce Assistant Inspector General for Inspections and Special Inquiries SUBJECT: INFORMATION: Inspection Report on "Internal Controls over Computer Hard Drives at the Oak Ridge National Laboratory" BACKGROUND The Department of Energy's (Department) Oak Ridge National Laboratory (ORNL) in Oak

380

Method of determining methane and electrochemical sensor therefor  

DOE Patents (OSTI)

A method and instrument including an electrochemical cell for the detection and measurement of methane in a gas by the oxidation of methane electrochemically at a working electrode in a nonaqueous electrolyte at a voltage about about 1.4 volts versus R.H.E. (the reversible hydrogen electrode potential in the same electrolyte), and the measurement of the electrical signal resulting from the electrochemical oxidation.

Zaromb, Solomon (Hinsdale, IL); Otagawa, Takaaki (Westmont, IL); Stetter, Joseph R. (Naperville, IL)

1986-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Baseline Test Specimen Machining Report  

SciTech Connect

The Next Generation Nuclear Plant (NGNP) Project is tasked with selecting a high temperature gas reactor technology that will be capable of generating electricity and supplying large amounts of process heat. The NGNP is presently being designed as a helium-cooled high temperature gas reactor (HTGR) with a large graphite core. The graphite baseline characterization project is conducting the research and development (R&D) activities deemed necessary to fully qualify nuclear-grade graphite for use in the NGNP reactor. Establishing nonirradiated thermomechanical and thermophysical properties by characterizing lot-to-lot and billet-to-billet variations (for probabilistic baseline data needs) through extensive data collection and statistical analysis is one of the major fundamental objectives of the project. The reactor core will be made up of stacks of graphite moderator blocks. In order to gain a more comprehensive understanding of the varying characteristics in a wide range of suitable graphites, any of which can be classified as “nuclear grade,” an experimental program has been initiated to develop an extensive database of the baseline characteristics of numerous candidate graphites. Various factors known to affect the properties of graphite will be investigated, including specimen size, spatial location within a graphite billet, specimen orientation within a billet (either parallel to [P] or transverse to [T] the long axis of the as-produced billet), and billet-to-billet variations within a lot or across different production lots. Because each data point is based on a certain position within a given billet of graphite, particular attention must be paid to the traceability of each specimen and its spatial location and orientation within each billet. The evaluation of these properties is discussed in the Graphite Technology Development Plan (Windes et. al, 2007). One of the key components in the evaluation of these graphite types will be mechanical testing on specimens drawn from carefully controlled sections of each billet. To this end, this report will discuss the machining of the first set of test specimens that will be evaluated in this program through tensile, compressive, and flexural testing. Validation that the test specimens have been produced to the tolerances required by the applicable ASTM standards, and to the quality control levels required by this program, will demonstrate the viability of sending graphite to selected suppliers that will provide valuable and certifiable data to future data sets that are integral to the NGNP program and beyond.

mark Carroll

2009-08-01T23:59:59.000Z

382

Electrochemical Performance of LiFeMnPO4  

Science Conference Proceedings (OSTI)

Symposium, Energy Storage: Materials, Systems, and Applications. Presentation Title, Electrochemical Performance of LiFeMnPO4: A Comparison of Synthesis ...

383

Electrochemical Behavior of Calcium-Bismuth Alloys in Molten Salt ...  

Science Conference Proceedings (OSTI)

Abstract Scope, The electrochemical properties of calcium-bismuth alloys were investigated to ... Behavior of Silicon Electrodepositing in Fluoride Molten Salts.

384

Variable temperature electrochemical strain microscopy of Sm-doped ceria  

Science Conference Proceedings (OSTI)

Variable temperature electrochemical strain microscopy has been used to study the electrochemical activity of Sm-doped ceria as a function of temperature and bias. The electrochemical strain microscopy hysteresis loops have been collected across the surface at different temperatures and the relative activity at different temperatures has been compared. The relaxation behavior of the signal at different temperatures has been also evaluated to relate kinetic process during bias induced electrochemical reactions with temperature and two different kinetic regimes have been identified. The strongly non-monotonic dependence of relaxation behavior on temperature is interpreted as evidence for water-mediated mechanisms.

Jesse, Stephen [ORNL; Morozovska, A. N. [National Academy of Science of Ukraine, Kiev, Ukraine; Kalinin, Sergei V [ORNL; Eliseev, E. A. [National Academy of Science of Ukraine, Kiev, Ukraine; Yang, Nan [ORNL; Doria, Sandra [ORNL; Tebano, Antonello [ORNL

2013-01-01T23:59:59.000Z

385

The Electrochemical Behavior of Electro-Deoxidation Process of ...  

Science Conference Proceedings (OSTI)

Presentation Title, The Electrochemical Behavior of Electro-Deoxidation Process of Ilmenite Concentrate in Molten Salt. Author(s), Xuyang Liu, Meilong Hu, ...

386

Real Space Mapping of Oxygen Vacancy Diffusion and Electrochemical ...  

The electrochemical energy storage and conversion systems based on solid-gas and solid-liquid ... high energy and power density materials necessitates understanding ...

387

Real Space Mapping of Oxygen Vacancy Diffusion and Electrochemical ...  

Electrochemical energy storage and conversion systems based on solid–gas ... energy and power-density materials necessitates understanding the nanoscale

388

ELECTROCHEMICAL CORROSION STUDY FOR TANK 241-AY-102 SLUDGE  

SciTech Connect

The report describes the analyses performed on core samples from the sludge region of the waste in Tank 241-AY-102 to determine the electrochemical corrosion potential.

DUNCAN JB

2002-09-24T23:59:59.000Z

389

Query processing techniques for solid state drives  

Science Conference Proceedings (OSTI)

Solid state drives perform random reads more than 100x faster than traditional magnetic hard disks, while offering comparable sequential read and write bandwidth. Because of their potential to speed up applications, as well as their reduced power consumption, ... Keywords: columnar storage, flash memory, join index, late materialization, semi-join reduction, ssd

Dimitris Tsirogiannis; Stavros Harizopoulos; Mehul A. Shah; Janet L. Wiener; Goetz Graefe

2009-06-01T23:59:59.000Z

390

PCTS Local Driving Directions Princeton University  

E-Print Network (OSTI)

PCTS Local Driving Directions Princeton University Princeton Center for Theoretical Science Jadwin to Jadwin Hall, there are several parking options. a) There are limited visitors' parking spots directly, in the first aisle, after you turn into the parking lot, which is located on Ivy Lane. (Use the directions

391

Conditions driving chemical freeze-out  

E-Print Network (OSTI)

We propose the entropy density as the thermodynamic condition driving best the chemical freeze-out in heavy-ion collisions. Taking its value from lattice calculations at zero chemical potential, we find that it is excellent in reproducing the experimentally estimated freeze-out parameters. The two characteristic endpoints in the freeze-out diagram are reproduced as well.

A. Tawfik

2004-10-28T23:59:59.000Z

392

Multilevel converters for large electric drives  

SciTech Connect

Traditional two-level high frequency pulse width modulation (PWM) inverters for motor drives have several problems associated with their high frequency switching which produces common-mode voltage and high voltage change (dV/dt) rates to the motor windings. Multilevel inverters solve these problems because their devices can switch at a much lower frequency. Two different multilevel topologies are identified for use as a converter for electric drives, a cascade inverter with separate dc sources and a back-to-back diode clamped converter. The cascade inverter is a natural fit for large automotive all electric drives because of the high VA ratings possible and because it uses several levels of dc voltage sources which would be available from batteries or fuel cells. The back to back diode damped converter is ideal where a source of ac voltage is available such as a hybrid electric vehicle. Simulation and experimental results show the superiority of these two converters over PWM based drives.

Tolbert, L.M.; Peng, F.Z.

1997-11-01T23:59:59.000Z

393

Oscillation control system for electric motor drive  

DOE Patents (OSTI)

A feedback system for controlling mechanical oscillations in the torsionally complaint drive train of an electric or other vehicle. Motor speed is converted in a processor to estimate state signals in which a plant model which are used to electronically modify the torque commands applied to the motor. 5 figs.

Slicker, J.M.; Sereshteh, A.

1988-08-30T23:59:59.000Z

394

Oscillation control system for electric motor drive  

DOE Patents (OSTI)

A feedback system for controlling mechanical oscillations in the torsionally complaint drive train of an electric or other vehicle. Motor speed is converted in a processor to estimate state signals in which a plant model which are used to electronically modify thetorque commands applied to the motor.

Slicker, James M. (Union Lake, MI); Sereshteh, Ahmad (Union Lake, MI)

1988-01-01T23:59:59.000Z

395

Machine Maintenance Integrated Performance Support System  

SciTech Connect

The objectives of this partnership project were to develop a preventive maintenance checklist program, a troubleshooting system for the Vertical Turning Center (VTC)-5, an on-line manual, and to integrate these components with a custom browser that would run on the VTC-5 machine's controller and would support future internet/intranet delivery. Kingsbury provided subject matter experts from engineering, manufacturing, and technical support. They also provided photographs, schematics, and CAD drawings, which AlliedSignal Federal Manufacturing and Technologies (ASFM and T) digitized for use in the final program. Information from The Kingsbury troubleshooting experts were interviewed regarding symptoms and root causes of system malfunctions This knowledge was captured and from it, fault trees were developed. These trees were then incorporated into the EPSS as a troubleshooting tool. The troubleshooting portion of the system presents simple questions to the machine operator in order to determine the likely cause or causes of malfunctions and then recommends systematic corrective actions. The on-line reference manual, covering operations and maintenance, provides text and illustrations to the machine operator in a traditional structure, but additionally offers the capability to search voluminous amounts of technical data and retrieve specific information on request. The maintenance portion of the EPSS includes checklists that are displayed daily, weekly, monthly, and annually, as appropriate, on the VTC-5 controller screen. The controller software is unavailable for machining parts until the machine tool operator goes through and checks off all of the checklist items. This project provided the team with a detailed understanding of the knowledge and information required to produce and support advanced machine tools. In addition, it resulted in the design and construction of a prototype VTC-5 EPSS containing all the logic and interfaces necessary to integrate operations and maintenance information from other Kingsbury machine tools.

Bohley, M.C.; Schwartz, M.E.

1998-03-11T23:59:59.000Z

396

Evaluation of half wave induction motor drive for use in passenger vehicles. Final report  

SciTech Connect

This report describes research performed to devise and design a lower cost inverter-induction motor drive for electrical propulsion of passenger vehicles. A two-phase inverter-motor system is recommended. It is predicted to provide comparable vehicle performance, improved reliability and nearly a 10% cost advantage for a high production vehicle because of the reduction in total parts count, decreased total rating of the power semiconductor switches and somewhat simpler control hardware compared to the conventional three-phase bridge inverter-motor drive system. The major disadvantages of the two-phase inverter-motor drive are that the tow-phase motor is larger and more expensive than a three-phase machine, the design of snubbers for the power switches is difficult because motor lead and bifilar winding leakage inductances produce higher transient voltages, and the torque pulsations are relatively large because of the necessity to limit the inverter switching frequency to achieve high efficiency. An actuall model of the two-phase system must be constructed and evaluated. The most challenging engineering design task will be to design the inverter, motor and snubber circuits to minimize transient voltages with high system efficiency.

Hoft, R.G.; Kawamura, A.; Goodarzi, A.; Yang, G.Q.; Erickson, C.L.

1985-05-01T23:59:59.000Z

397

International Conference on Machine Control & Guidance 2008 1 Automatic Guidance of Track Laying Machines with  

E-Print Network (OSTI)

laying machines, coordinate systems, error detection, work process driven data management, quality. Its outstanding result, the track management system Toporail, was developed under the operational lead on Machine Control & Guidance 2008 5 Figure 5: Maintenance process driven data management: Data updates

398

Alternative Fuels Data Center: Texas Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Texas Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Texas Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Texas Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Texas Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Texas Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Texas Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Texas Laws and Incentives for Driving / Idling

399

Alternative Fuels Data Center: Nebraska Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Nebraska Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Nebraska Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Nebraska Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Nebraska Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Nebraska Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Nebraska Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Nebraska Laws and Incentives for Driving / Idling

400

Alternative Fuels Data Center: Maine Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Maine Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Maine Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Maine Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Maine Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Maine Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Maine Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Maine Laws and Incentives for Driving / Idling

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Alternative Fuels Data Center: Federal Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Federal Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Federal Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Federal Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Federal Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Federal Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Federal Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Federal Laws and Incentives for Driving / Idling

402

Alternative Fuels Data Center: Florida Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Florida Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Florida Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Florida Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Florida Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Florida Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Florida Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Florida Laws and Incentives for Driving / Idling

403

Alternative Fuels Data Center: Iowa Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Iowa Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Iowa Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Iowa Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Iowa Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Iowa Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Iowa Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Iowa Laws and Incentives for Driving / Idling

404

Alternative Fuels Data Center: Maryland Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Maryland Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Maryland Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Maryland Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Maryland Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Maryland Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Maryland Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Maryland Laws and Incentives for Driving / Idling

405

Alternative Fuels Data Center: Alaska Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Alaska Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Alaska Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Alaska Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Alaska Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Alaska Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Alaska Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Alaska Laws and Incentives for Driving / Idling

406

Alternative Fuels Data Center: Vermont Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Vermont Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Vermont Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Vermont Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Vermont Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Vermont Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Vermont Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Vermont Laws and Incentives for Driving / Idling

407

Vehicle Technologies Office: Fact #452: January 15, 2007 Driving  

NLE Websites -- All DOE Office Websites (Extended Search)

2: January 15, 2: January 15, 2007 Driving Differences to someone by E-mail Share Vehicle Technologies Office: Fact #452: January 15, 2007 Driving Differences on Facebook Tweet about Vehicle Technologies Office: Fact #452: January 15, 2007 Driving Differences on Twitter Bookmark Vehicle Technologies Office: Fact #452: January 15, 2007 Driving Differences on Google Bookmark Vehicle Technologies Office: Fact #452: January 15, 2007 Driving Differences on Delicious Rank Vehicle Technologies Office: Fact #452: January 15, 2007 Driving Differences on Digg Find More places to share Vehicle Technologies Office: Fact #452: January 15, 2007 Driving Differences on AddThis.com... Fact #452: January 15, 2007 Driving Differences Those living in the center city drive fewer miles in a day than those in

408

Alternative Fuels Data Center: Indiana Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Indiana Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Indiana Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Indiana Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Indiana Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Indiana Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Indiana Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Indiana Laws and Incentives for Driving / Idling

409

Alternative Fuels Data Center: Delaware Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Delaware Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Delaware Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Delaware Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Delaware Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Delaware Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Delaware Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Delaware Laws and Incentives for Driving / Idling

410

Alternative Fuels Data Center: Wyoming Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Wyoming Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Wyoming Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Wyoming Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Wyoming Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Wyoming Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Wyoming Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Wyoming Laws and Incentives for Driving / Idling

411

Alternative Fuels Data Center: Oklahoma Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Oklahoma Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Oklahoma Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Oklahoma Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Oklahoma Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Oklahoma Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Oklahoma Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Oklahoma Laws and Incentives for Driving / Idling

412

Alternative Fuels Data Center: Hawaii Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Hawaii Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Hawaii Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Hawaii Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Hawaii Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Hawaii Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Hawaii Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Hawaii Laws and Incentives for Driving / Idling

413

Alternative Fuels Data Center: Virginia Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Virginia Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Virginia Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Virginia Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Virginia Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Virginia Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Virginia Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Virginia Laws and Incentives for Driving / Idling

414

Alternative Fuels Data Center: Tennessee Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Tennessee Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Tennessee Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Tennessee Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Tennessee Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Tennessee Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Tennessee Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Tennessee Laws and Incentives for Driving / Idling

415

Alternative Fuels Data Center: Oregon Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Oregon Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Oregon Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Oregon Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Oregon Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Oregon Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Oregon Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Oregon Laws and Incentives for Driving / Idling

416

Alternative Fuels Data Center: Minnesota Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Minnesota Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Minnesota Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Minnesota Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Minnesota Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Minnesota Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Minnesota Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Minnesota Laws and Incentives for Driving / Idling

417

Alternative Fuels Data Center: Missouri Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Missouri Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Missouri Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Missouri Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Missouri Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Missouri Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Missouri Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Missouri Laws and Incentives for Driving / Idling

418

Alternative Fuels Data Center: Utah Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Utah Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Utah Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Utah Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Utah Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Utah Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Utah Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Utah Laws and Incentives for Driving / Idling

419

Alternative Fuels Data Center: Idaho Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Idaho Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Idaho Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Idaho Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Idaho Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Idaho Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Idaho Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idaho Laws and Incentives for Driving / Idling

420

Alternative Fuels Data Center: Illinois Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Illinois Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Illinois Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Illinois Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Illinois Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Illinois Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Illinois Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Illinois Laws and Incentives for Driving / Idling

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Alternative Fuels Data Center: Kentucky Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Kentucky Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Kentucky Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Kentucky Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Kentucky Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Kentucky Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Kentucky Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Kentucky Laws and Incentives for Driving / Idling

422

Alternative Fuels Data Center: Louisiana Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Louisiana Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Louisiana Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Louisiana Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Louisiana Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Louisiana Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Louisiana Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Louisiana Laws and Incentives for Driving / Idling

423

Drive piston assembly for a valve actuator assembly  

DOE Patents (OSTI)

A drive piston assembly is provided that is operable to selectively open a poppet valve. The drive piston assembly includes a cartridge defining a generally stepped bore. A drive piston is movable within the generally stepped bore and a boost sleeve is coaxially disposed with respect to the drive piston. A main fluid chamber is at least partially defined by the generally stepped bore, drive piston, and boost sleeve. First and second feedback chambers are at least partially defined by the drive piston and each are disposed at opposite ends of the drive piston. At least one of the drive piston and the boost sleeve is sufficiently configured to move within the generally stepped bore in response to fluid pressure within the main fluid chamber to selectively open the poppet valve. A valve actuator assembly and engine are also provided incorporating the disclosed drive piston assembly.

Sun, Zongxuan (Troy, MI)

2010-02-23T23:59:59.000Z

424

Alternative Fuels Data Center: Arizona Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Arizona Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Arizona Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Arizona Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Arizona Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Arizona Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Arizona Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Arizona Laws and Incentives for Driving / Idling

425

Alternative Fuels Data Center: Nevada Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Nevada Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Nevada Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Nevada Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Nevada Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Nevada Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Nevada Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Nevada Laws and Incentives for Driving / Idling

426

Alternative Fuels Data Center: Montana Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Montana Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Montana Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Montana Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Montana Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Montana Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Montana Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Montana Laws and Incentives for Driving / Idling

427

Alternative Fuels Data Center: Colorado Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Colorado Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Colorado Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Colorado Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Colorado Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Colorado Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Colorado Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Colorado Laws and Incentives for Driving / Idling

428

Alternative Fuels Data Center: Kansas Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Kansas Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Kansas Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Kansas Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Kansas Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Kansas Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Kansas Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Kansas Laws and Incentives for Driving / Idling

429

Alternative Fuels Data Center: Wisconsin Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Wisconsin Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Wisconsin Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Wisconsin Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Wisconsin Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Wisconsin Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Wisconsin Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Wisconsin Laws and Incentives for Driving / Idling

430

Cost Effective Machining Of Ceramics (CEMOC)  

SciTech Connect

The purpose of the CEMOC program was to support U.S. industry needs in fabricating precision components, from difficult to machine materials, while maintaining and enhancing the precision manufacturing skills of the Oak Ridge Complex. Oak Ridge and partner company personnel worked in a team relationship wherein each contributed equally to the success of the program. In general, Oak Ridge contributed a wider range of expertise to a given task while the companies provided operations-specific equipment and shop-floor services. Process control technologies, machining procedures and parameters, and coolant-related environmental tasks were the primary focus areas. The companies were very pleased with the results of the CRADAs and are planning on continuing the relationships. Finish machining operations contribute the majority of the costs associated with fabricating high quality ceramic products. These components are typically used in harsh environments such as diesel engines, defense machinery, and automotive components. The required finishing operations involve a variety of technologies including process controls, machine coolants, product certification, etc. and are not limited only to component grinding methods. The broad range of manufacturing problem solving expertise available in Oak Ridge provided resources that were far beyond what are typically available to the CRADA partners. These partners contributed equipment, such as state-of-the-art machine tools, and operation-specific experience base. In addition, addressing these challenging tasks enabled Oak Ridge personnel to maintain familiarity with rapidly advancing technologies, such as those associated with computer control systems.

Barkman, W.E.

1997-04-18T23:59:59.000Z

431

Trunnion Collar Removal Machine - Gap Analysis Table  

SciTech Connect

The purpose of this document is to review the existing the trunnion collar removal machine against the ''Nuclear Safety Design Bases for License Application'' (NSDB) [Ref. 10] requirements and to identify codes and standards and supplemental requirements to meet these requirements. If these codes and standards can not fully meet these requirements then a ''gap'' is identified. These gaps will be identified here and addressed using the ''Trunnion Collar Removal Machine Design Development Plan'' [Ref. 15]. The codes and standards, supplemental requirements, and design development requirements for the trunnion collar removal machine are provided in the gap analysis table (Appendix A, Table 1). Because the trunnion collar removal machine is credited with performing functions important to safety (ITS) in the NSDB [Ref. 10], design basis requirements are applicable to ensure equipment is available and performs required safety functions when needed. The gap analysis table is used to identify design objectives and provide a means to satisfy safety requirements. To ensure that the trunnion collar removal machine performs required safety functions and meets performance criteria, this portion of the gap analysis tables supplies codes and standards sections and the supplemental requirements and identifies design development requirements, if needed.

M. Johnson

2005-06-27T23:59:59.000Z

432

Final Report on Control Algorithm to Improve the Partial-Load Efficiency of Surface PM Machines with Fractional-Slot Concentrated Windings  

DOE Green Energy (OSTI)

Surface permanent magnet (SPM) synchronous machines using fractional-slot concentrated windings are being investigated as candidates for high-performance traction machines for automotive electric propulsion systems. It has been shown analytically and experimentally that such designs can achieve very wide constant-power speed ratios (CPSR) [1,2]. This work has shown that machines of this type are capable of achieving very low cogging torque amplitudes as well as significantly increasing the machine power density [3-5] compared to SPM machines using conventional distributed windings. High efficiency can be achieved in this class of SPM machine by making special efforts to suppress the eddy-current losses in the magnets [6-8], accompanied by efforts to minimize the iron losses in the rotor and stator cores. Considerable attention has traditionally been devoted to maximizing the full-load efficiency of traction machines at their rated operating points and along their maximum-power vs. speed envelopes for higher speeds [9,10]. For example, on-line control approaches have been presented for maximizing the full-load efficiency of PM synchronous machines, including the use of negative d-axis stator current to reduce the core losses [11,12]. However, another important performance specification for electric traction applications is the machine's efficiency at partial loads. Partial-load efficiency is particularly important if the target traction application requires long periods of cruising operation at light loads that are significantly lower than the maximum drive capabilities. While the design of the machine itself is clearly important, investigation has shown that this is a case where the choice of the control algorithm plays a critical role in determining the maximum partial-load efficiency that the machine actually achieves in the traction drive system. There is no evidence that this important topic has been addressed for this type of SPM machine by any other authors. This topic takes on even greater significance for fractional-slot concentrated-winding SPM machine designs. In particular, maximizing the torque/power density of this class of SPM machines typically leads to machine designs with high numbers of poles. The resulting high electrical frequencies can easily result in high stator core losses unless special care is taken during the machine design process. The purpose of this report is to discuss a modified vector control algorithm for a fractional-slot concentrated winding SPM machine that has been developed to maximize the machine's partial-load efficiency over a wide range of operating conditions. For purposes of this discussion, a 55 kW (peak) SPM machine designed to meet requirements established in the US FreedomCar program [13] is used as the basis for demonstrating the proposed technique. A combination of closed-form analysis [14] and finite element analysis (FEA) is used during this investigation.

McKeever, John W [ORNL; Reddy, Patel [University of Wisconsin; Jahns, Thomas M [ORNL

2007-05-01T23:59:59.000Z

433

FINAL REPORT ON CONTROL ALGORITHM TO IMPROVE THE PARTIAL-LOAD EFFICIENCY OFSURFACE PM MACHINES WITH FRACTIONAL-SLOT CONCENTRATED WINDINGS  

SciTech Connect

Surface permanent magnet (SPM) synchronous machines using fractional-slot concentrated windings are being investigated as candidates for high-performance traction machines for automotive electric propulsion systems. It has been shown analytically and experimentally that such designs can achieve very wide constant-power speed ratios (CPSR) [1,2]. This work has shown that machines of this type are capable of achieving very low cogging torque amplitudes as well as significantly increasing the machine power density [3-5] compared to SPM machines using conventional distributed windings. High efficiency can be achieved in this class of SPM machine by making special efforts to suppress the eddy-current losses in the magnets [6-8], accompanied by efforts to minimize the iron losses in the rotor and stator cores. Considerable attention has traditionally been devoted to maximizing the full-load efficiency of traction machines at their rated operating points and along their maximum-power vs. speed envelopes for higher speeds [9,10]. For example, on-line control approaches have been presented for maximizing the full-load efficiency of PM synchronous machines, including the use of negative d-axis stator current to reduce the core losses [11,12]. However, another important performance specification for electric traction applications is the machine's efficiency at partial loads. Partial-load efficiency is particularly important if the target traction application requires long periods of cruising operation at light loads that are significantly lower than the maximum drive capabilities. While the design of the machine itself is clearly important, investigation has shown that this is a case where the choice of the control algorithm plays a critical role in determining the maximum partial-load efficiency that the machine actually achieves in the traction drive system. There is no evidence that this important topic has been addressed for this type of SPM machine by any other authors. This topic takes on even greater significance for fractional-slot concentrated-winding SPM machine designs. In particular, maximizing the torque/power density of this class of SPM machines typically leads to machine designs with high numbers of poles. The resulting high electrical frequencies can easily result in high stator core losses unless special care is taken during the machine design process. The purpose of this report is to discuss a modified vector control algorithm for a fractional-slot concentrated winding SPM machine that has been developed to maximize the machine's partial-load efficiency over a wide range of operating conditions. For purposes of this discussion, a 55 kW (peak) SPM machine designed to meet requirements established in the US FreedomCar program [13] is used as the basis for demonstrating the proposed technique. A combination of closed-form analysis [14] and finite element analysis (FEA) is used during this investigation.

Reddy, P.B.; Jahns, T.M.

2007-04-30T23:59:59.000Z

434

Proceedings of the 35th conference on Winter simulation: driving innovation: driving innovation  

Science Conference Proceedings (OSTI)

The 2003 Winter Simulation Conference (WSC) continues a thirty-six year tradition as the premier event in discrete-event and combined discrete-continuous simulation. The conference theme, Driving Innovation, invites you to push the boundaries and find ...

David Ferrin; Douglas J. Morrice

2003-12-01T23:59:59.000Z

435

Characterization and Modeling of Electrochemical Energy Conversion Systems by Impedance Techniques.  

E-Print Network (OSTI)

??This thesis introduces (i) amendments to basic electrochemical measurement techniques in the time and frequency domain suitable for electrochemical energy conversion systems like fuel cells… (more)

Klotz, Dino

2012-01-01T23:59:59.000Z

436

Electrochemical mercerization, souring, and bleaching of textiles  

DOE Patents (OSTI)

Economical, pollution-free treatment of textiles occurs in a low voltage electrochemical cell that mercerizes (or scours), sours, and optionally bleaches without effluents and without the purchase of bulk caustic, neutralizing acids, or bleaches. The cell produces base in the cathodic chamber for mercerization and an equivalent amount of acid in the anodic chamber for neutralizing the fabric. Gas diffusion electrodes are used for one or both electrodes and may simultaneously generate hydrogen peroxide for bleaching. The preferred configuration is a stack of bipolar electrodes, in which one or both of the anode and cathode are gas diffusion electrodes, and where no hydrogen gas is evolved at the cathode. 5 figs.

Cooper, J.F.

1995-10-10T23:59:59.000Z

437

Electrochemical cell with high conductivity glass electrolyte  

DOE Patents (OSTI)

A secondary electrochemical cell with sodium-sulfur or other molten reactants is provided with a ionically conductive glass electrolyte. The cell is contained within an electrically conductive housing with a first portion at negative potential and a second portion insulated therefrom at positive electrode potential. The glass electrolyte is formed into a plurality of elongated tubes and placed lengthwise within the housing. The positive electrode material, for instance sulfur, is sealed into the glass electrolyte tubes and is provided with an elongated axial current collector. The glass electrolyte tubes are protected by shield tubes or sheets that also define narrow annuli for wicking of the molten negative electrode material. 6 figs.

Nelson, P.A.; Bloom, I.D.; Roche, M.F.

1987-04-21T23:59:59.000Z

438

Electrochemical cell with high conductivity glass electrolyte  

DOE Patents (OSTI)

A secondary electrochemical cell with sodium-sulfur or other molten reactants is provided with an ionically conductive glass electrolyte. The cell is contained within an electrically conductive housing with a first portion at negative potential and a second portion insulated therefrom at positive electrode potential. The glass electrolyte is formed into a plurality of elongated tubes and placed lengthwise within the housing. The positive electrode material, for instance sulfur, is sealed into the glass electrolyte tubes and is provided with an elongated axial current collector. The glass electrolyte tubes are protected by shield tubes or sheets that also define narrow annuli for wicking of the molten negative electrode material.

Nelson, P.A.; Bloom, I.D.; Roche, M.F.

1986-04-17T23:59:59.000Z

439

Magnesium/manganese dioxide electrochemical cell  

SciTech Connect

This patent describes an improvement in a magnesium/manganese dioxide electrochemical cell that has been stored following partial usage and including an alloy of magnesium as the anode, a moist cathode mix of carbon black, manganese dioxide, magnesium hydroxide, barium chromate and lithium chromate as the cathode, and 3.5 to 4.0 normal magnesium perchlorate as the electrolyte. The improvement involves increasing the moisture content of the cathode mix from 34 to 38 percent at the time of making the cell to reduce the self discharge and increase the operating capacity after the cell has been stored following partial usage.

Jarvis, L.P.; Brundage, M.T.; Atwater, T.B.

1989-09-26T23:59:59.000Z

440

Electrochemical cell assembled in discharged state  

DOE Patents (OSTI)

A secondary, electrochemical cell is assembled in a completely discharged state within a sealed containment. As assembled, the cell includes a positive electrode separated from a negative electrode by a molten salt electrolyte. The positive electrode is contained within a porous structure, permitting passage of molten electrolyte, and includes one or more layers of a metallic mesh, e.g. iron, impregnated with an intimate mixture of lithium sulfide and the electrolyte. The negative electrode is a porous plaque of aluminum metal. Prior to using the cell, an electrical charge forms lithium-aluminum alloy within the negative electrode and metal sulfide within the positive electrode.

Yao, Neng-Ping (Hinsdale, IL); Walsh, William J. (Naperville, IL)

1976-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Morphology in electrochemically grown conducting polymer films  

DOE Patents (OSTI)

A conducting polymer film with an improved space filling is formed on a metal electrode surface. A self-assembling monolayer is formed directly on the metal surface where the monolayer has a first functional group that binds to the metal surface and a second chemical group that forms a chemical bonding site for molecules forming the conducting polymer. The conducting polymer is then conventionally deposited by electrochemical deposition. In one example, a conducting film of polyaniline is formed on a gold electrode surface with an intermediate monolayer of p-aminothiophenol. 2 figs.

Rubinstein, I.; Gottesfeld, S.; Sabatani, E.

1992-04-28T23:59:59.000Z

442

Adjustable speed drives: Applications and R&D needs  

SciTech Connect

The largest opportunity for the growth of adjustable speed drives (ASDs) during the next 5-6 years is in pump, fan and compressor (PFC) applications where a constant, fixed speed operation is converted to adjustable speed in order to realize energy savings. Inverter supplied induction motors are and will continue to be predominately used in these applications. Over the long term (10-15 years), the greatest ASD growth is expected in large volume consumer applications: first in hybrid electric vehicles (EVs) and in residential heating, ventilation and air-conditioning (HVAC). Both induction and a variety of AC Permanent Magnet motors are expected to be the dominant technology in this new field. The traditional ASD applications in industries which require adjustable speed (such as machine tools, robotics, steel rolling, extruders, paper mill finishing lines, etc.) offer a relatively limited potential for above average ASD growth since most of these applications have already converted to electronic speed control. As a result, ASD growth in this sector will essentially track the growth of the corresponding industries. If realized, both short and long term ASD growth opportunities will result in significant advancements of ASD technology, which will then substantially affect all other, more fragmented, ASD applications. In fact, any single large volume ASD application will serve as a catalyst for improving ASD characteristics in all other ASD applications with the same voltage rating. ASD cost and reliability (defined in the context of application compatibility) are the two most important factors which will determine whether the ASD growth opportunities are realized. Conversely, any technological improvement which carries a cost increase will be restricted to niche applications, at best. Consequently, future R & D efforts should be directed to secure reduction in ASD cost and improvement in ASD reliability. A specific action plan is outlined in this report.

Stefanovic, V.R.

1995-09-01T23:59:59.000Z

443

RHIC Machine/Detector Planning Meetings  

NLE Websites -- All DOE Office Websites (Extended Search)

RHIC Machine/Detector Planning Meeting RHIC Machine/Detector Planning Meeting RHIC STAR PHENIX RHIC STAR PHENIX BNL Home Page C-AD Home Page C-AD ES&F Division BNL Physics Department RHIC Run History Super Conducting Magnet Division Run 14 Scheduling Physicist Home Page NPP PAC Run 13 Recommendations CAD Power Run 11-Run 13 Off-line CNI Polarization Results APEX for Run 13 RHIC Machine/Detector Meetings for Run 12 FY02-Present C-AD Energy Use Plots Cryo Power Run 11-Run 13 H-jet Target Results APEX Nov. 19-20, 2012 Workshop for Run 13 RHIC Run 13 Run Home Page (pp) FY10-Present BNL Energy Use Plot Cryo Temperatures Latest Luminosity Plots BNL Current Energy Use (BNL Intranet only and requires password) RHIC Retreat 2012

444

Gallant Precision Machining GPM | Open Energy Information  

Open Energy Info (EERE)

Gallant Precision Machining GPM Gallant Precision Machining GPM Jump to: navigation, search Name Gallant Precision Machining (GPM) Place Hsinchu, Taiwan Sector Solar Product Engaged in the design and manufacture of solar cell manufacturing equpiment. Coordinates 24.69389°, 121.148064° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":24.69389,"lon":121.148064,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

445

Machine Overview | Argonne Leadership Computing Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

BG/Q Drivers Status Machine Overview Machine Partitions Torus Network Data Storage & File Systems Compiling & Linking Queueing & Running Jobs Data Transfer Debugging & Profiling Performance Tools & APIs Software & Libraries IBM References Intrepid/Challenger/Surveyor Tukey Eureka / Gadzooks Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Machine Overview Blue Gene /Q systems are composed of login nodes, I/O nodes, and compute nodes. Login Nodes Login and compile nodes are IBM Power 7-based systems running Red Hat Linux and are the user's interface to a Blue Gene/Q system. This is where users login, edit files, compile, and submit jobs. These are shared resources

446

Micro-machined thermo-conductivity detector  

DOE Patents (OSTI)

A micro-machined thermal conductivity detector for a portable gas chromatograph. The detector is highly sensitive and has fast response time to enable detection of the small size gas samples in a portable gas chromatograph which are in the order of nanoliters. The high sensitivity and fast response time are achieved through micro-machined devices composed of a nickel wire, for example, on a silicon nitride window formed in a silicon member and about a millimeter square in size. In addition to operating as a thermal conductivity detector, the silicon nitride window with a micro-machined wire therein of the device can be utilized for a fast response heater for PCR applications.

Yu, Conrad (Antioch, CA)

2003-01-01T23:59:59.000Z

447

Multi-winding homopolar electric machine  

SciTech Connect

A multi-winding homopolar electric machine and method for converting between mechanical energy and electrical energy. The electric machine includes a shaft defining an axis of rotation, first and second magnets, a shielding portion, and a conductor. First and second magnets are coaxial with the shaft and include a charged pole surface and an oppositely charged pole surface, the charged pole surfaces facing one another to form a repulsive field therebetween. The shield portion extends between the magnets to confine at least a portion of the repulsive field to between the first and second magnets. The conductor extends between first and second end contacts and is toroidally coiled about the first and second magnets and the shield portion to develop a voltage across the first and second end contacts in response to rotation of the electric machine about the axis of rotation.

Van Neste, Charles W

2012-10-16T23:59:59.000Z

448

Gerald S. Frankel1 Electrochemical Techniques in Corrosion: Status,  

E-Print Network (OSTI)

of electrochemical methods. Interested readers are referred to other works. Instead, the focus tank holding liquid radio- active waste at the Hanford Site 30 . A probe made from a thick. For a system such as Fe in sulfuric acid, all of the electrochemical techniques work quite well

449

W-36: Electrochemical Capacitance of Polyaniline, Evaluated in ...  

Science Conference Proceedings (OSTI)

Abstract Scope, Electrochemical capacitors (EC) are novel energy storage devices ... in the supercapacitors due to its high capacitive characteristics, low cost and ease ... In this work we present a comparative study of charge storage in acid and ... W-101: Synthesis and Electrochemical Performance of LiMnBO3 as a Novel ...

450

Separation system with a sheath-flow supported electrochemical detector  

DOE Patents (OSTI)

An electrochemical detector including side channels associated with a separation channel of a sample component separation apparatus is provided. The side channels of the detector, in one configuration, provide a sheath-flow for an analyte exiting the separation channel which directs the analyte to the electrically developed electrochemical detector.

Mathies, Richard A. (Moraga, CA); Emrich, Charles A. (Berkeley, CA); Singhal, Pankaj (Pasadena, CA); Ertl, Peter (Styria, AT)

2008-10-21T23:59:59.000Z

451

New and Underutilized Technology: Vending Machine Occupancy Sensors |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Vending Machine Occupancy Sensors Vending Machine Occupancy Sensors New and Underutilized Technology: Vending Machine Occupancy Sensors October 7, 2013 - 9:09am Addthis The following information outlines key deployment considerations for vending machine occupancy sensors within the Federal sector. Benefits Vending machine occupancy sensors detect when no people are in the vicinity and powers down beverage vending machines. These systems do not completely turn off compressor, but reduce their run times. Application Vending machine occupancy sensors are applicable in most building categories where vending machines are present. Key Factors for Deployment Occupancy sensors or similar features should be an integral part of new vending machine purchases. Ranking Criteria Federal energy savings, cost-effectiveness, and probability of success are

452

Argonne's GREET Model - Driving Transportation Solutions  

NLE Websites -- All DOE Office Websites (Extended Search)

Driving Driving Transportation Solutions Model Argonne's GREET D r i v i n g Tr a n s p o r t a t i o n S o l u t i o n s ARGONNE'S GREET Argonne's GREET model is widely recognized as the "gold standard" for evaluating and comparing the energy and environmental impacts of transportation fuels and advanced vehicles. The Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model is a one-of-a-kind analytical tool that simulates the energy use and emissions output of various vehicle and fuel combinations. Sponsored by the U.S. Department of Energy's (DOE) Office of Energy Efficiency and Renewable Energy, the free software program gives researchers the unique ability to analyze technologies over an entire life cycle - from well to wheels and from raw material mining to vehicle disposal.

453

Enhancing cavity cooling with cavity driving  

E-Print Network (OSTI)

Cavity-mediated cooling has the potential to become one of the most efficient techniques to cool molecular species down to very low temperatures. However, theoretical schemes with single-laser driving require relatively strong trapping potentials and relatively long cavity photon life times which are hard to realise experimentally. In this paper we therefore consider an alternative cavity cooling scenario with double-laser driving. It is shown that the second laser can enhance the phonon-photon coherence which governs the time evolution of the mean phonon number, thereby resulting in higher cooling rates and a lower final temperature, when the cavity decay rate kappa is four or more times larger than the phonon frequency nu of the trapped particle.

Blake, Tony; Beige, Almut

2010-01-01T23:59:59.000Z

454

Passive machine augmented composite for multifunctional properties  

E-Print Network (OSTI)

This dissertation studies by experiment and numerical analysis an advanced composite material (Machine Augmented Composite or MAC) for enhancement of the passive damping while maintaining its stiffness. This MAC is composed of a pre-buckled wall structure placed within a viscoelastic matrix. The pre-buckled machine can contain viscous fluids for additional energy dissipation. For the experiments, the MAC was fabricated by using rigid and soft polyurethane as a machine and matrix material respectively. Various viscosity fluids (0.83 ~ 4730 cps) filled the inner-channel of the machine structure. Dynamic properties such as tan ?? and the loss modulus (E") of the composite were measured and compared with those of a homogeneous matrix sample over a frequency range of 0.1 to 100 Hz at room temperature through load-controlled cyclic testing. Measured tan ?? and loss modulus values for the composite were higher than those of the matrix alone in the 1 to 40 Hz range. However the viscous fluid effects on the overall damping properties were small. The performance of a theoretical MAC was explored through numerical analysis. The amount of inner-channel gap closure was calculated for various matrix Poisson??s ratios, for various Young??s modulus ratios between the machine and matrix (Emachine/Ematrix), and for the volume fraction of the machines. The most desirable performance of the composite was obtained when the matrix Poisson??s ratio was 0.49, and there was interaction between the Emachine/Ematrix and the volume fraction of the machines. Also the proper volume fraction range of the machine was predicted to be between 0.15 and 0.2 for the lamina shape MAC. Based upon the analysis, a sandwich structure MAC was fabricated and tested. This composite showed 11 times higher stiffness than the matrix without loosing the matrix damping property. This dissertation shows that the research met these objectives: 1) the MAC concept is effective for passive damping of vibrations, 2) that material combinations studied here had optimal combinations for best performance, and 3) that this is a promising field study for future passive and active materials development.

Kim, Jong Hyun

2005-08-01T23:59:59.000Z

455

High slot utilization systems for electric machines  

DOE Patents (OSTI)

Two new High Slot Utilization (HSU) Systems for electric machines enable the use of form wound coils that have the highest fill factor and the best use of magnetic materials. The epoxy/resin/curing treatment ensures the mechanical strength of the assembly of teeth, core, and coils. In addition, the first HSU system allows the coil layers to be moved inside the slots for the assembly purpose. The second system uses the slided-in teeth instead of the plugged-in teeth. The power density of the electric machine that uses either system can reach its highest limit.

Hsu, John S (Oak Ridge, TN)

2009-06-23T23:59:59.000Z

456

Heating and current drive systems for TPX  

SciTech Connect

The heating and current drive (H and CD) system proposed for the TPX tokamak will consist of ion cyclotron, neutral beam, and lower hybrid systems. It will have 17.5 MW of installed H and CD power initially, and can be upgraded to 45 MW. It will be used to explore advanced confinement and fully current-driven plasma regimes with pulse lengths of up to 1,000 s.

Swain, D.; Goranson, P. [Oak Ridge National Lab., TN (United States); Halle, A. von; Bernabei, S.; Greenough, N. [Princeton Univ., NJ (United States). Plasma Physics Lab.

1994-05-24T23:59:59.000Z

457

NEUTRONIC REACTOR CONTROL ROD DRIVE APPARATUS  

DOE Patents (OSTI)

ABS>A suspension mechanism between a vertically movable nuclear reactor control rod and a rod extension, which also provides information for the operator or an automatic control signal, is described. A spring connects the rod extension to a drive shift. The extension of the spring indicates whether (1) the rod is at rest on the reactor, (2) the rod and extension are suspended, or (3) the extension alone is suspended, the spring controlling a 3-position electrical switch.

Oakes, L.C.; Walker, C.S.

1959-12-15T23:59:59.000Z

458

Batteries for Electric Drive Vehicles - Status 2005  

Science Conference Proceedings (OSTI)

Commercial availability of advanced battery systems that meet the cost, performance, and durability requirements of electric drive vehicles (EDVs) is a crucial challenge to the growth of markets for these vehicles. Hybrid electric vehicles (HEVs) are a subset of the family of EDVs, which include battery electric vehicles (BEVs), power assist hybrid electric vehicles, plug-in hybrid electric vehicles (PHEVs), and fuel cell vehicles. This study evaluates the state of advanced battery technology, presents u...

2005-11-29T23:59:59.000Z

459

GenDrive Limited | Open Energy Information  

Open Energy Info (EERE)

GenDrive Limited GenDrive Limited Jump to: navigation, search Name GenDrive Limited Place Cambridge, United Kingdom Zip CB23 3GY Sector Renewable Energy, Solar, Wind energy Product Developing a range of grid-connected inverters, 'Plug & Play', for renewable energy (mostly solar and wind) systems. These are intended to improve ease of installation. Coordinates 43.003745°, -89.017499° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.003745,"lon":-89.017499,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

460

Energetic Drives LLC | Open Energy Information  

Open Energy Info (EERE)

Energetic Drives LLC Energetic Drives LLC Jump to: navigation, search Name Energetic Drives LLC Place Gresham, Oregon Zip 97030 Sector Efficiency, Wind energy Product Oregon-based engineering firm that conducts industrial efficiency improvements, as well as repair and maintenance work for grid-tie inverters and wind turbines ranging from 10kW to 1.2MW. Coordinates 44.84866°, -88.786959° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":44.84866,"lon":-88.786959,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Development of an electrochemical hydrogen separator  

DOE Green Energy (OSTI)

The EHS is an electrochemical hydrogen separator based on the uniquely reversible nature of hydrogen oxidation-reduction reactions in electrochemical systems. The principle and the hardware concept are shown in Figure 1. Hydrogen from the mixed gas stream is oxidized to H{sup +} ions, transported through a cation transport electrolyte membrane (matrix) under an applied electric field and discharged in a pure hydrogen state on the cathode. The cation transfer electrolyte membrane provides a barrier between the feed and product gases. The EHS design is an offshoot of phosphoric acid fuel cell development. Although any proton transfer electrolyte can be used, the phosphoric acid based system offers a unique advantage because its operating temperature of {approximately}200{degree}C makes it tolerant to trace CO and also closely matches the water-shift reactor exit gas temperature ({approximately}250{degree}C). Hydrogen-containing streams in coal gasification systems have large carbon monoxide contents. For efficient hydrogen recovery, most of the CO must be converted to hydrogen by the low temperature water-shift reaction (Figure 2). Advanced coal gasification and gas separation technologies offer an important pathway to the clean utilization of coal resources.

Abens, S.; Fruchtman, J.; Kush, A.

1993-09-01T23:59:59.000Z

462

In situ AFM studies on lithium (de)intercalation-induced morphology changes in a LixCoO2 micro-machined thin film electrode  

Science Conference Proceedings (OSTI)

Structural instability due to intercalation-induced stresses in electrode materials is one of the key degradation mechanisms of Li-ion batteries. Fragmentation of material degrades structural integrity and electrical resistance, and also accelerates harmful side reactions. In situ experiments are the appropriate approach to investigate the actual time dependent nature of behavior changes of an electrode material while it is charged and discharged. In the current work, a unique in situ electrochemical atomic force microscopy (ECAFM) measurement is made on samples of cylindrical shape, which are micro-machined by focused ion beam (FIB) microscopy. This pre-defined geometry allows the exclusion of secondary, non-active materials from the electrochemically active material as well as the removal of any vagueness coming from the irregular geometry of particles. Also, the experimental results are used to validate a proposed coupled electrochemical and mechanical model for determination of the stress-strain state of active electrode material during electrochemical cycling. The results produced using the model correlate the experimental data rather well. The combined results reveal the key effects of the geometry, kinetics, and mechanics of electrode materials on the stress-strain state, which is a barometer of structural stability of a material.

Park, Jonghuyn [University of Michigan; Kalnaus, Sergiy [ORNL; Han, Sangwoo [University of Michigan; Lee, Yoon Koo [University of Michigan; Less, Greg [University of Michigan; Dudney, Nancy J [ORNL; Daniel, Claus [ORNL; Sastry, Ann-Marie [University of Michigan

2013-01-01T23:59:59.000Z

463

Alternative Fuels Data Center: California Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: California Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: California Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: California Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: California Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: California Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: California Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

464

Alternative Fuels Data Center: Pennsylvania Laws and Incentives for Driving  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Pennsylvania Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Pennsylvania Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Pennsylvania Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Pennsylvania Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Pennsylvania Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Pennsylvania Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

465

Alternative Fuels Data Center: Mississippi Laws and Incentives for Driving  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Mississippi Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Mississippi Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Mississippi Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Mississippi Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Mississippi Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Mississippi Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

466

Alternative Fuels Data Center: Connecticut Laws and Incentives for Driving  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Connecticut Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Connecticut Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Connecticut Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Connecticut Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Connecticut Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Connecticut Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

467

Secrets of the Motor That Drives Archaea Revealed  

NLE Websites -- All DOE Office Websites (Extended Search)

Secrets of the Motor That Drives Archaea Revealed Secrets of the Motor That Drives Archaea Revealed Print Thursday, 14 February 2013 00:00 An international team led by John Tainer...

468

Driving Home to a Clean Energy Future | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Driving Home to a Clean Energy Future Driving Home to a Clean Energy Future June 7, 2011 - 10:57am Addthis Eric Barendsen Energy Technology Program Specialist, Office of Energy...

469

Driving Battery Production in Ohio | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Driving Battery Production in Ohio Driving Battery Production in Ohio November 1, 2010 - 6:19pm Addthis Randy Turk, Elyria Site Manager; Rep. Betty Sutton (OH); Frank Bozich,...

470

Do You Drive a Hybrid Electric Vehicle? | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Drive a Hybrid Electric Vehicle? Do You Drive a Hybrid Electric Vehicle? July 9, 2009 - 1:34am Addthis In Tuesday's entry, Francis X. Vogel from the Wisconsin Clean Cities...

471

NREL: News Feature - NREL Drives Toward the Future with Fuel...  

NLE Websites -- All DOE Office Websites (Extended Search)

Drives Toward the Future with Fuel Cell EVs June 21, 2013 A hydrogen fuel cell powered Toyota sport utility vehicle emblazoned with an NREL logo drives past a building on the NREL...

472

DIRECT-DRIVE AND EDDY-CURRENT SEPTUM MAGNETS  

NLE Websites -- All DOE Office Websites (Extended Search)

laminations and leakage fields are summarized in Appendices A and B, respectively. 2. Direct-Drive Septum For the upper half of the 2-D direct-drive septum magnet in Fig. 1 the...

473

Vehicle Technologies Office: Fact #420: April 17, 2006 Driving...  

NLE Websites -- All DOE Office Websites (Extended Search)

0: April 17, 2006 Driving Less Due to Gasoline Prices to someone by E-mail Share Vehicle Technologies Office: Fact 420: April 17, 2006 Driving Less Due to Gasoline Prices on...

474

Optimization of Driving Styles for Fuel Economy Improvement  

SciTech Connect

Modern vehicles have sophisticated electronic control units, particularly to control engine operation with respect to a balance between fuel economy, emissions, and power. These control units are designed for specific driving conditions and testing. However, each individual driving style is different and rarely meets those driving conditions. In the research reported here we investigate those driving style factors that have a major impact on fuel economy. An optimization framework is proposed with the aim of optimizing driving styles with respect to these driving factors. A set of polynomial metamodels are constructed to reflect the responses produced by changes of the driving factors. Then we compare the optimized driving styles to the original ones and evaluate the efficiency and effectiveness of the optimization formulation.

Malikopoulos, Andreas [ORNL; Aguilar, Juan P. [Georgia Institute of Technology

2012-01-01T23:59:59.000Z

475

Personalized driving behavior monitoring and analysis for emerging hybrid vehicles  

Science Conference Proceedings (OSTI)

Emerging electric-drive vehicles, such as hybrid electric vehicles (HEVs) and plug-in HEVs (PHEVs), hold the potential for substantial reduction of fuel consumption and greenhouse gas emissions. User driving behavior, which varies from person ...

Kun Li; Man Lu; Fenglong Lu; Qin Lv; Li Shang; Dragan Maksimovic

2012-06-01T23:59:59.000Z

476

Alternative Fuels Data Center: Fuel-Efficient Driving Training  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Fuel-Efficient Driving Training to someone by E-mail Share Alternative Fuels Data Center: Fuel-Efficient Driving Training on Facebook Tweet about Alternative Fuels Data Center:...

477

Alternative Fuels Data Center: Washington Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Washington Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Washington Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Washington Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Washington Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Washington Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Washington Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

478

Diamond Wire Saw for Precision Machining of Laser Target Components  

SciTech Connect

The fabrication of precision laser targets requires a wide variety of specialized mesoscale manufacturing techniques. The diamond wire saw developed in this study provides the capability to precisely section meso-scale workpieces mounted on the assembly stations used by the Target Fabrication Group. This new capability greatly simplifies the fabrication of many types of targets and reduces the time and cost required to build the targets. A variety of materials are used to fabricate targets, including metals, plastics with custom designed chemical formulas, and aerogels of various densities. The materials are usually provided in the form of small pieces or cast rods that must be machined to the required shape. Many of these materials, such as metals and some plastics, can be trimmed using a parting tool on a diamond turning machine. However, other materials, such as aerogels and brittle materials, cannot be adequately cut with a parting tool. In addition, the geometry of the parts often requires that the workpieces be held in a special assembly station, which excludes the use of a parting tool. In the past, these materials were sectioned using a small, handheld coping saw that used a diamond-impregnated wire as a blade. This miniature coping saw was effective, but it required several hours to cut through certain materials. Furthermore, the saw was guided by hand and often caused significant damage to fragile aerogels. To solve these problems, the diamond wire saw shown in Figure 1 was developed. The diamond wire saw is designed to machine through materials that are mounted in the Target Fabrication Group's benchtop assembly stations. These assembly stations are the primary means of aligning and assembling target components, and there is often a need to machine materials while they are mounted in the assembly stations. Unfortunately, commercially available saws are designed for very different applications and are far too large to be used with the assembly stations. Therefore, a custom diamond wire saw was designed and constructed. The diamond wire saw cuts through workpieces using a continuous loop of diamond-impregnated wire of length 840 mm. The wire loop runs around several idler pulleys and is driven by a simple geared DC motor that rotates at 17 rpm. The linear speed of the wire is 107 inches/minute. The saw is oriented at an angle of 20{sup o} from horizontal, so the operator can view the wire through the cutout at the front end of the saw. When looking through a microscope or camera with a horizontal line of sight, the operator can clearly see the wire as it cuts through the workpiece, as shown in the right side of Figure 1. The saw is mounted on a two-axis stage that allows the operator to align the wire with the workpiece. To cut through the workpiece, the operator drives the wire through the workpiece by turning the feed micrometer. An image of the interior of the diamond wire saw appears in Figure 2. This picture was taken after removing the protective cover plate from the saw.

Bono, M J; Bennett, D W

2005-08-08T23:59:59.000Z

479

Clean Cities 2011 Stakeholders Summit - Electric Drive Vehicles...  

NLE Websites -- All DOE Office Websites (Extended Search)

Department of Energy's Vehicle Technologies Program Vehicle Technologies Program - Clean Cities 2011 Stakeholders Summit - Electric Drive Vehicles and Charging Infrastructure...

480

DC Drive Ride-Through Technology Alternatives and Development  

Science Conference Proceedings (OSTI)

Adjustable speed drive (ASD) ride-through issues have caused increased concerns due to drive susceptibility to power disturbances and the costly results of process disruptions. Losses incurred due to DC drive trips can be avoided for critical production processes by employing ride-through alternatives. The purpose of this study is to determine the DC drive ride-through requirements of industrial customers and match those ride-through needs with possible solutions.

1998-12-19T23:59:59.000Z

Note: This page contains sample records for the topic "machine drive electrochemical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

New aggregation programs drive consumer participation in Illinois ...  

U.S. Energy Information Administration (EIA)

New aggregation programs drive consumer participation ... Ameren Energy Marketing, Direct Energy ... (buying their electricity from renewable generators) ...

482

PHEV Energy Storage and Drive Cycle Impacts (Presentation)  

DOE Green Energy (OSTI)

Plug-in Hybrid vehicles energy storage and drive cycle impacts, presented at the 7th Advanced Automotive Battery Conference.

Markel, T.; Pesaran, A.

2007-05-17T23:59:59.000Z

483

Electrical Motor Drive Apparatus and Method - Energy Innovation Portal  

Vehicles and Fuels Industrial Technologies Electrical ... Auto manufacturers ; Industrial motor drive manufacturers; Patents and Patent Applications. ID Number.

484

CSP Theorems for Communicating B Machines  

E-Print Network (OSTI)

CSP Theorems for Communicating B Machines Steve Schneider and Helen Treharne Technical Report CSD #12;#12;Introduction 1 Abstract. Recent work on combining CSP and B has provided ways of describing sys- tems comprised of components described in both B (to express requirements on state) and CSP (to

Doran, Simon J.

485

Data management for the world's largest machine  

Science Conference Proceedings (OSTI)

The world's largest machine, the Large Hadron Collider, will have four detectors whose output is expected to answer fundamental questions about the universe. The ATLAS detector is expected to produce 3.2 PB of data per year which will be distributed ...

Sigve Haug; Farid Ould-Saada; Katarina Pajchel; Alexander L. Read

2006-06-01T23:59:59.000Z

486

Rankine cycle machines for solar cooling  

DOE Green Energy (OSTI)

A vigorous effort to develop and demonstrate practical uses of solar energy to heat and cool buildings, to process agricultural products, and to provide thermal and electrical energy for industry has been initiated. One significant part of this effort is the research, development, and demonstration of Rankine cycle machines using fluids heated by solar energy. Recent developments in three such devices are discussed briefly.

Weathers, H.M.

1978-08-01T23:59:59.000Z

487

MACHINE SHOP SAFETY POLICY THE WYSS INSTITUTE  

E-Print Network (OSTI)

Health 210 Lincoln Street 617-432-1370 617-355-7580 617-632-0710 617-632-3016 617-353-6630 617 Research Building (NRB) Security: For lockouts and escorts 617-432-6119 Harvard Custodial Services 617 in the Wyss Institute for Biologically Inspired Engineering (Wyss Institute) light machine shops in the Center

Church, George M.

488

Gas quantitative analysis with support vector machine  

Science Conference Proceedings (OSTI)

Gas sensor array is an important part of electronic nose. The gas analysis performance of electronic nose is affected badly by the cross sensitivity of gas sensor array. In order to solve the problem of the cross sensitivity, in this work a new method ... Keywords: electronic nose, gas mixture, quantitative analysis, support vector machine

Liang Xie; Xiaodong Wang

2009-06-01T23:59:59.000Z

489

Performance implications of virtualizing multicore cluster machines  

Science Conference Proceedings (OSTI)

High performance computers are typified by cluster machines constructed from multicore nodes and using high performance interconnects like Infiniband. Virtualizing such 'capacity computing' platforms implies the shared use of not only the nodes and node ... Keywords: Infiniband, high-performance computing, virtualization

Adit Ranadive; Mukil Kesavan; Ada Gavrilovska; Karsten Schwan

2008-03-01T23:59:59.000Z

490

HEART SMART NUTRITION Be a Lean Machine  

E-Print Network (OSTI)

Lesson 6 HEART SMART NUTRITION Be a Lean Machine This Heart Smart Nutrition series can help you Heart, Lung and Blood Institute). Physical activity increases your metabolic rate, which helps to burn more calories. Plus it helps the heart and lungs function to full capacity. Exercise also helps raise

491

Preprocessing unbalanced data using support vector machine  

Science Conference Proceedings (OSTI)

This paper deals with the application of support vector machine (SVM) to deal with the class imbalance problem. The objective of this paper is to examine the feasibility and efficiency of SVM as a preprocessor. Our study analyzes different classification ... Keywords: COIL data, Hybrid method, Preprocessor, SVM, Unbalanced data

M. A. H. Farquad; Indranil Bose

2012-04-01T23:59:59.000Z

492

CONTROL ROD DRIVE MECHANISM FOR A NUCLEAR REACTOR  

DOE Patents (OSTI)

A lead-screw-type control rod drive featuring an electric motor and a fluid motor arranged to provide a selectably alternative driving means is described. The electric motor serves to drive the control rod slowly during normal operation, while the fluid motor, assisted by an automatic declutching of the electric motor, affords high-speed rod insertion during a scram. (AEC)

Hawke, B.C.; Liederbach, F.J.; Lones, W.

1963-05-14T23:59:59.000Z

493

Design of a desktop milling machine for fabrication in an introductory machine shop class  

E-Print Network (OSTI)

The purpose of this research is to design, fabricate and test the electromechanical subsystem of a CNC milling machine kit. Unlike all other CNC kits on the market, the purpose of this kit is to teach students the principles ...

Lorenc, Dan (Daniel P.)

2010-01-01T23:59:59.000Z

494

Tolerating latency in replicated state machines through client speculation  

Science Conference Proceedings (OSTI)

Replicated state machines are an important and widely-studied methodology for tolerating a wide range of faults. Unfortunately, while replicas should be distributed geographically for maximum fault tolerance, current replicated state machine protocols ...

Benjamin Wester; James Cowling; Edmund B. Nightingale; Peter M. Chen; Jason Flinn; Barbara Liskov

2009-04-01T23:59:59.000Z

495

Forecasting electricity demand by hybrid machine learning model  

Science Conference Proceedings (OSTI)

This paper proposes a hybrid machine learning model for electricity demand forecasting, based on Bayesian Clustering by Dynamics (BCD) and Support Vector Machine (SVM). In the proposed model, a BCD classifier is firstly applied to cluster the input data ...

Shu Fan; Chengxiong Mao; Jiadong Zhang; Luonan Chen

2006-10-01T23:59:59.000Z

496

Proceedings of the 25th international conference on Machine learning  

Science Conference Proceedings (OSTI)

This volume contains the papers accepted to the 25th International Conference on Machine Learning (ICML 2008). ICML is the annual conference of the International Machine Learning Society (IMLS), and provides a venue for the presentation and discussion ...

William Cohen; Andrew McCallum; Sam Roweis

2008-07-01T23:59:59.000Z

497

The RWTH Aachen machine translation system for WMT 2012  

Science Conference Proceedings (OSTI)

This paper describes the statistical machine translation (SMT) systems developed at RWTH Aachen University for the translation task of the NAACL 2012 Seventh Workshop on Statistical Machine Translation (WMT 2012). We participated in the evaluation ...

Matthias Huck; Stephan Peitz; Markus Freitag; Malte Nuhn; Hermann Ney

2012-06-01T23:59:59.000Z

498

Virtual cutter path display for dental milling machine  

E-Print Network (OSTI)

This paper presents the prototype of a mixed reality system using the computer controlled dental milling machine, which is called MRD Mill. First, overview of the core dental milling machine developed in this study is ...

Ito, Teruaki

499

Machine Learning Forensics for Law Enforcement, Security, and Intelligence  

Science Conference Proceedings (OSTI)

Increasingly, crimes and fraud are digital in nature, occurring at breakneck speed and encompassing large volumes of data. To combat this unlawful activity, knowledge about the use of machine learning technology and software is critical. Machine Learning ...

Jesus Mena

2011-06-01T23:59:59.000Z

500

Seattle City Light - Vending Machine Rebate Program | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of VendingMiser Energy Efficient Vending Machines. VendingMiser reduces the energy consumption of cold drink vending machines by using an occupancy sensor to power down the...