National Library of Energy BETA

Sample records for ma electronic machining

  1. El Ma Electronic Machining srl | Open Energy Information

    Open Energy Info (EERE)

    Ma Electronic Machining srl Jump to: navigation, search Name: El.Ma. Electronic Machining srl Place: Riva del Garda (TN), Italy Zip: 38066 Sector: Hydro, Hydrogen, Solar, Wind...

  2. DOE - Office of Legacy Management -- Heald Machine Co - MA 15

    Office of Legacy Management (LM)

    Heald Machine Co - MA 15 FUSRAP Considered Sites Site: Heald Machine Co. (MA.15) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: Worcester , Massachusetts MA.15-1 Evaluation Year: 1994 MA.15-2 MA.15-3 Site Operations: Research and development on uranium slug drilling machines in the early 1960s. MA.15-1 Site Disposition: Eliminated - Potential for contamination considered remote based on the limited quantity of materials handled MA.15-2

  3. DOE - Office of Legacy Management -- La Pointe Machine and Tool Co - MA 16

    Office of Legacy Management (LM)

    La Pointe Machine and Tool Co - MA 16 FUSRAP Considered Sites Site: LA POINTE MACHINE AND TOOL CO. (MA.16 ) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: Hudson , Massachusetts MA.16-1 Evaluation Year: 1994 MA.16-2 MA.16-3 Site Operations: Conducted machine tests involving uranium metal during the mid-1950s. MA.16-1 Site Disposition: Eliminated - Potential for contamination considered remote based on the limited quantity of materials

  4. Advnaced Power Electronics and Electric Machines (APEEM) R&D...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advnaced Power Electronics and Electric Machines (APEEM) R&D Program Overview Advnaced Power Electronics and Electric Machines (APEEM) R&D Program Overview 2010 DOE Vehicle ...

  5. Power Electronics and Electrical Machines Review, August 2006...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electrical Machines Review, August 2006 Power Electronics and Electrical Machines Review, August 2006 This report is a summary of the Review Panel at the FY06 DOE FreedomCAR and ...

  6. Power Electronics and Electric Machines Merit Review, May 2005...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Power Electronics and Electrical Machines Review, August 2006 Advanced Soft Switching Inverter for Reducing Switching and Power Losses Eliminating ...

  7. Power Electronics and Electrical Machines Review, August 2006

    Broader source: Energy.gov [DOE]

    This report is a summary of the Review Panel at the FY06 DOE FreedomCAR and Vehicle Technologies (FCVT) Annual Review of Advanced Power Electronics and Electric Machine (APEEM) research activities held on August 15-17, 2006

  8. NREL: Transportation Research - Power Electronics and Electric Machines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Power Electronics and Electric Machines A photo of a researcher using testing equipment in a lab. NREL R&D is making wide-scale adoption of electric-drive vehicles more feasible by developing technologies and components with superior reliability, efficiency, and durability, while dramatically decreasing costs. Photo by Dennis Schroeder, NREL NREL's power electronics and electric machines research focuses on systems for electric-drive vehicles (EDVs) that control the flow of electricity

  9. NREL: Transportation Research - Power Electronics and Electric Machines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Facilities and Electric Machines Facilities NREL's power electronics and electric machines thermal management test facilities feature a wide range of equipment and enable world-class experimental and modeling capabilities. NREL researchers excel at testing and measurement in the areas of heat transfer, reliability characterization, and thermal and thermomechanical modeling. The following list describes NREL's innovative testing capabilities and equipment. A photo of four researchers in

  10. MA AP MA MA MA AP AP MA MA MA AP AP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP MA MA MA AP AP MA MA MA AP AP low low low AP MA Run PAMM AP Low alpha University Holidays APPAMM Spear Down Hrs S 30 31 S 30 5260 832 6092 2013 2014 Scheduled Hours Users...

  11. An Overview of the MaRIE X-FEL and Electron Radiography LINAC RF Systems

    SciTech Connect (OSTI)

    Bradley, Joseph Thomas III; Rees, Daniel Earl; Scheinker, Alexander; Sheffield, Richard L.

    2015-05-04

    The purpose of the Matter-Radiation Interactions in Extremes (MaRIE) facility at Los Alamos National Laboratory is to investigate the performance limits of materials in extreme environments. The MaRIE facility will utilize a 12 GeV linac to drive an X-ray Free-Electron Laser (FEL). Most of the same linac will also be used to perform electron radiography. The main linac is driven by two shorter linacs; one short linac optimized for X-FEL pulses and one for electron radiography. The RF systems have historically been the one of the largest single component costs of a linac. We will describe the details of the different types of RF systems required by each part of the linacs. Starting with the High Power RF system, we will present our methodology for the choice of RF system peak power and pulselength with respect to klystron parameters, modulator parameters, performance requirements and relative costs. We will also present an overview of the Low Level RF systems that are proposed for MaRIE and briefly describe their use with some proposed control schemes.

  12. Electron beam machining using rotating and shaped beam power distribution

    DOE Patents [OSTI]

    Elmer, John W.; O'Brien, Dennis W.

    1996-01-01

    An apparatus and method for electron beam (EB) machining (drilling, cutting and welding) that uses conventional EB guns, power supplies, and welding machine technology without the need for fast bias pulsing technology. The invention involves a magnetic lensing (EB optics) system and electronic controls to: 1) concurrently bend, focus, shape, scan, and rotate the beam to protect the EB gun and to create a desired effective power-density distribution, and 2) rotate or scan this shaped beam in a controlled way. The shaped beam power-density distribution can be measured using a tomographic imaging system. For example, the EB apparatus of this invention has the ability to drill holes in metal having a diameter up to 1000 .mu.m (1 mm or larger), compared to the 250 .mu.m diameter of laser drilling.

  13. Electron beam machining using rotating and shaped beam power distribution

    DOE Patents [OSTI]

    Elmer, J.W.; O`Brien, D.W.

    1996-07-09

    An apparatus and method are disclosed for electron beam (EB) machining (drilling, cutting and welding) that uses conventional EB guns, power supplies, and welding machine technology without the need for fast bias pulsing technology. The invention involves a magnetic lensing (EB optics) system and electronic controls to: (1) concurrently bend, focus, shape, scan, and rotate the beam to protect the EB gun and to create a desired effective power-density distribution, and (2) rotate or scan this shaped beam in a controlled way. The shaped beam power-density distribution can be measured using a tomographic imaging system. For example, the EB apparatus of this invention has the ability to drill holes in metal having a diameter up to 1,000 {micro}m (1 mm or larger), compared to the 250 {micro}m diameter of laser drilling. 5 figs.

  14. power electronics and machines | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Power Electronics and Electrical Machines Improvements in electric traction drives are essential to electric drive vehicles, and have the potential to significantly reduce petroleum consumption in the transportation sector as well as help meet national economic and energy security goals. Hybrid electric vehicles (HEVs) can reduce petroleum use compared to average conventional vehicles by as much as 50%, while plug-in electric vehicles (PEVs) extend these savings even further. Advanced

  15. Electronic spectra from TDDFT and machine learning in chemical space

    SciTech Connect (OSTI)

    Ramakrishnan, Raghunathan; Hartmann, Mia; Tapavicza, Enrico; Lilienfeld, O. Anatole von

    2015-08-28

    Due to its favorable computational efficiency, time-dependent (TD) density functional theory (DFT) enables the prediction of electronic spectra in a high-throughput manner across chemical space. Its predictions, however, can be quite inaccurate. We resolve this issue with machine learning models trained on deviations of reference second-order approximate coupled-cluster (CC2) singles and doubles spectra from TDDFT counterparts, or even from DFT gap. We applied this approach to low-lying singlet-singlet vertical electronic spectra of over 20 000 synthetically feasible small organic molecules with up to eight CONF atoms. The prediction errors decay monotonously as a function of training set size. For a training set of 10 000 molecules, CC2 excitation energies can be reproduced to within ±0.1 eV for the remaining molecules. Analysis of our spectral database via chromophore counting suggests that even higher accuracies can be achieved. Based on the evidence collected, we discuss open challenges associated with data-driven modeling of high-lying spectra and transition intensities.

  16. MA AP MA MA MA AP AP MA MA MA AP AP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP MA MA MA AP AP MA MA MA AP AP low low low AP MA Run PAMM / AP Low alpha University Holidays AP/PAMM Spear Down Hrs S 30 31 S 30 5260 832 6092 2013 2014 Scheduled Hours Users Total 29 31 30 29 31 30 F 31 28 29 30 T 31 28 27 29 28 30 30 27 29 W 30 29 26 29 27 31 28 AP T 29 26 29 27 AP PAMM 30 28 25 31 28 26 30 27 30 28 26 M 28 25 29 27 24 30 27 25 29 26 S 27 24 28 26 23 27 29 26 24 28 25 S 26 23 28 26 24 23 27 25 28 28 25 25 22 27 24 25 23 F 25 26 24 21 27 24 22 26 23 22 27 T 24 21 20 24 22 21

  17. MA MA AP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MA AP low low low MA Run PAMM / AP Low alpha University Holidays AP/PAMM Spear Down Oct Nov S Apr May Jun Jul Aug Sep 7/17/2015 SPEAR OPERATING SCHEDULE 2015-2016 2015 2016 Oct Nov Dec Jan Feb Mar S 1 1 2 1 4 1 M 2 1 2 1 T 3 1 3 PAMM 1 2 2 3 6 3 W 4 2 3 AP AP 5 2 1 3 2 4 F 2 6 4 1 5 2 4 3 T 1 5 3 5 2 7 4 3 1 5 4 1 6 4 1 5 8 5 S 4 8 2 6 3 2 7 4 2 6 5 S 3 7 6 5 3 7 6 3 8 6 3 7 4 8 7 M 5 9 7 4 9 10 7 AP PAMM PAMM PAMM PAMM 4 8 5 4 9 6 8 AP 5 9 6 5 AP 10 7 5 9 AP 8 6 10 9 13 W 7 11 9 11 T 6 10 8 12

  18. Tammy Ma

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    tammy ma Tammy Ma Drawn to Science and Giving Back Tammy Ma Tammy Ma We sat down with Dr. Tammy Ma, an experimental physicist at the National Ignition Facility, to talk about what motivates her, why she loves science, her belief in giving back, and advice for younger scientists. Motivation and work ethic My mother, unfortunately, didn't get the chance to finish high school or go to college because she emigrated to Canada as a teenager. So it's always been instilled in both me and my younger

  19. DOE FreedomCAR and vehicle technologies program advanced power electronic and electrical machines annual review report

    SciTech Connect (OSTI)

    Olszewski, Mitch

    2006-10-11

    This report is a summary of the Review Panel at the FY06 DOE FreedomCAR and Vehicle Technologies (FCVT) Annual Review of Advanced Power Electronics and Electric Machine (APEEM) research activities held on August 15-17, 2006.

  20. DRAFT MA

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MA low low MA Run PAMM / AP Low alpha University Holidays AP PAMM Spear Down 688 72 PAMM Users Total 5252 6012 Sep Oct Sep 2016 2017 Scheduled Hours Mar Apr May Jun Jul Aug Oct Nov Dec Jan Feb S 30 31 Lck SP S 29 30 31 F 30 28 30 29 31 30 29 29 T 30 27 31 28 29 28 AP W 30 28 29 26 31 30 27 28 AP 28 AP T 29 27 31 AP 30 27 AP AP AP PAMM 31 28 25 27 29 26 26 30 27 29 26 M 31 28 30 27 24 30 28 25 29 26 26 28 25 S 30 27 25 29 26 23 25 29 27 24 24 28 25 S 29 26 22 27 24 23 28 25 24 28 26 23 27 24 26

  1. DOE FreedomCAR and Vehicle Technologies Program Advanced Power Electronics and Electrical Machines Annual Review Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FreedomCAR and Vehicle Technologies Program Advanced Power Electronics and Electrical Machines Annual Review Report Pollard Technology Center Oak Ridge, Tennessee May 3-5, 2005 Prepared by Oak Ridge National Laboratory June 16, 2005 For DOE Internal Use Only Table of Contents Page Attendee List 3 Webcast Attendance Report 5 Evaluation Form Results 6 Summary of Reviewers' Ratings (grouped by research area) 9 Reviewers Rating Descriptions 12 Reviewers' Comments (grouped by title) 13 Appendix A

  2. MaRIE Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MaRIE Presentations MaRIE Presentations MaRIE will provide a capability to address the control of performance and production of weapons materials at the mesoscale. MaRIE fills a critical gap in length scale between the integral scale addressed by studies conducted at DARHT, U1a, NIF, and Z. MaRIE 1.0 Matter Radiation Interactions in Extremes 1.0 70th Anniversary (pdf) July 27, 2013

  3. Air Cooling Technology for Advanced Power Electronics and Electric Machines (Presentation)

    SciTech Connect (OSTI)

    Bharathan, D.

    2009-05-01

    This presentation gives an overview of the status and FY09 accomplishments for the NREL thermal management research project 'Air Cooling for Power Electronics'.

  4. MaRIE Undulator & XFEL Systems

    SciTech Connect (OSTI)

    Nguyen, Dinh Cong; Marksteiner, Quinn R.; Anisimov, Petr Mikhaylovich; Buechler, Cynthia Eileen

    2015-03-23

    The 22 slides in this presentation treat the subject under the following headings: MaRIE XFEL Performance Parameters, Input Electron Beam Parameters, Undulator Design, Genesis Simulations, Risks, and Summary It is concluded that time-dependent Genesis simulations show the MaRIE XFEL can deliver the number of photons within the required bandwidth, provided a number of assumptions are met; the highest risks are associated with the electron beam driving the XFEL undulator; and risks associated with the undulator and/or distributed seeding technique may be evaluated or retired by performing early validation experiments.

  5. z machine

    National Nuclear Security Administration (NNSA)

    Z%20Machine%201808.jpg" alt"Air-gas breakdown when Z Machine at Sandia National Laboratories fires." title"Air-gas breakdown when Z Machine at Sandia National...

  6. DOE/MA-0518

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MA-0518 Origins of the Nevada Test Site United States Department of Energy Terrence R. Fehner F. G. Gosling History Division Executive Secretariat Management and Administration Department of Energy December 2000 Acknowledgments Origins of the Nevada Test Site was written in conjunction with the 50th anniversary commemoration of the Nevada Test Site. The history was released at the official celebration held in Las Vegas, Nevada, on December 18, 2000, fifty years after President Harry S. Truman

  7. US NE MA Site Consumption

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NE MA Site Consumption million Btu 0 500 1,000 1,500 2,000 2,500 3,000 US NE MA ... 8,000 10,000 12,000 US NE MA Site Consumption kilowatthours 0 250 500 750 1,000 ...

  8. MA-60 Org chart | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    MA-60 Org chart MA-60 Org chart Updated May 5, 2016 OAM Org Chart (MA-60) 053016.png OAM Org Chart (MA-60) 053016.pdf (148.11 KB)

  9. CAES MaCS Home

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    cross-cutting capabilities that support the Center for Advanced Energy Studies' (CAES) mission in multiple initiative areas. MaCS is largely made possible through its...

  10. MA Mortenson | Open Energy Information

    Open Energy Info (EERE)

    Name: MA Mortenson Place: Minnesota Zip: 55440-0710 Sector: Solar, Wind energy Product: Construction and building firm active in the installation of wind and solar farms....

  11. Ookie Ma | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Ookie Ma - Policy and Analysis Portfolio Manager, Office of Energy Efficiency and Renewable Energy Most Recent Natural Gas: Lifting Mileage Higher and Higher April 7 New EERE ...

  12. Discovery and utilization of sorghum genes (Ma5/Ma6)

    DOE Patents [OSTI]

    Mullet, John E; Rooney, William L; Klein, Patricia E; Morishige, Daryl; Murphy, Rebecca; Brady, Jeff A

    2012-11-13

    Methods and composition for the production of non-flowering or late flowering sorghum hybrid. For example, in certain aspects methods for use of molecular markers that constitute the Ma5/Ma6 pathway to modulate photoperiod sensitivity are described. The invention allows the production of plants having improved productivity and biomass generation.

  13. DOE - Office of Legacy Management -- Beverly MA Site - MA 04

    Office of Legacy Management (LM)

    This site is managed by the U.S. Department of Energy Office of Legacy Management. MA.04-1 - DOE Memorandum; Voigt to LaGrone; Subject: Designation of Sites for Remedial Action - ...

  14. Electric machine

    DOE Patents [OSTI]

    El-Refaie, Ayman Mohamed Fawzi; Reddy, Patel Bhageerath

    2012-07-17

    An interior permanent magnet electric machine is disclosed. The interior permanent magnet electric machine comprises a rotor comprising a plurality of radially placed magnets each having a proximal end and a distal end, wherein each magnet comprises a plurality of magnetic segments and at least one magnetic segment towards the distal end comprises a high resistivity magnetic material.

  15. MA Org Chart, November 16, 2015

    Broader source: Energy.gov (indexed) [DOE]

    of Staff MA-80 Office of the Ombudsman Rita R. Franklin, Director November 2015 Adrian Collins, Dep. Director MA-50 Office of Asset Management Carmelo Melendez, Director MA-40...

  16. MA Org Chart, August 13, 2015

    Broader source: Energy.gov (indexed) [DOE]

    of Staff MA-80 Office of the Ombudsman Rita R. Franklin, Director August 2015 Adrian Collins, Dep. Director MA-50 Office of Asset Management Carmelo Melendez, Director MA-40...

  17. The 300 mA SRF ERL

    SciTech Connect (OSTI)

    Ben-Zvi, Ilan

    2013-11-07

    Energy Recovery Linacs (ERL) are important for a variety of applications, from high-power Free-Electron Lasers (FEL) to polarized-electron polarized-proton colliders. The ERL current is arguably the most important characteristic of ERLs for such applications. With that in mind, the Collider-Accelerator Department at Brookhaven National Laboratory embarked on the development of a 300 mA ERL to serve as an R and D test-bed for high-current ERL technologies. These include high-current, extremely well damped superconducting accelerating cavities, high-current superconducting laser-photocathode electron guns and high quantum-efficiency photocathodes. In this presentation I will cover these ERL related developments.

  18. MA Org Chart, January 5, 2016

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Director Office of Scheduling and Advance Charles Quintero, Director MA-10 MA-70 Office of ... Information Technology Program Emily Stanton Chris Morris, FOIA Officer Vacant Office of ...

  19. EXTRACTION OF FRACTURE-MECHANICS AND TRANSMISSION-ELECTRON-MICROSCOPY SAMPLES FROM TRITIUM-EXPOSED RESERVOIRS USING ELECTRIC-DISCHARGE MACHINING

    SciTech Connect (OSTI)

    Morgan, M; Ken Imrich, K; Michael Tosten, M

    2006-08-31

    The Enhanced Surveillance Campaign is funding a program to investigate tritium aging effects on the structural properties of tritium reservoir steels. The program is designed to investigate how the structural properties of reservoir steels change during tritium service and to examine the role of microstructure and reservoir manufacturing on tritium compatibility. New surveillance tests are also being developed that can better gauge the long-term effects of tritium and its radioactive decay product, helium-3, on the properties of reservoir steels. In order to conduct these investigations, three types of samples are needed from returned reservoirs: tensile, fracture mechanics, and transmission-electron microscopy (TEM). An earlier report demonstrated how the electric-discharge machining (EDM) technique can be used for cutting tensile samples from serial sections of a 3T reservoir and how yield strength, ultimate strength and elongation could be measured from those samples. In this report, EDM was used successfully to section sub-sized fracture-mechanics samples from the inner and outer walls of a 3T reservoir and TEM samples from serial sections of a 1M reservoir. This report fulfills the requirements for the FY06 Level 3 milestone, TSR 15.1 ''Cut Fracture-Mechanics Samples from Tritium-Exposed Reservoir'' and TSR 15.2 ''Cut Transmission-electron-microscopy foils from Tritium-Exposed Reservoir'' for the Enhance Surveillance Campaign (ESC). This was in support of ESC L2-1870 Milestone-''Provide aging and lifetime assessments of selected components and materials for multiple enduring stockpile systems''.

  20. Scaling of X pinches from 1 MA to 6 MA.

    SciTech Connect (OSTI)

    Bland, Simon Nicholas; McBride, Ryan D.; Wenger, David Franklin; Sinars, Daniel Brian; Chittenden, Jeremy Paul; Pikuz, Sergei A.; Harding, Eric; Jennings, Christopher A.; Ampleford, David J.; Yu, Edmund P.; Cuneo, Michael Edward; Shelkovenko, Tatiana A.; Hansen, Stephanie B.

    2010-09-01

    This final report for Project 117863 summarizes progress made toward understanding how X-pinch load designs scale to high currents. The X-pinch load geometry was conceived in 1982 as a method to study the formation and properties of bright x-ray spots in z-pinch plasmas. X-pinch plasmas driven by 0.2 MA currents were found to have source sizes of 1 micron, temperatures >1 keV, lifetimes of 10-100 ps, and densities >0.1 times solid density. These conditions are believed to result from the direct magnetic compression of matter. Physical models that capture the behavior of 0.2 MA X pinches predict more extreme parameters at currents >1 MA. This project developed load designs for up to 6 MA on the SATURN facility and attempted to measure the resulting plasma parameters. Source sizes of 5-8 microns were observed in some cases along with evidence for high temperatures (several keV) and short time durations (<500 ps).

  1. Xuedan Ma | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Xuedan Ma Assistant Scientist Education Ph.D. University of Hamburg Postdoc experience Center for Integrated Nanotechnologies, Sandia National Laboratories, 2015-2016 Center for Integrated Nanotechnologies, Los Alamos National Laboratories, 2012-2015 Research Summary Quantum optics of semiconductor nanomaterials Temperature dependent single molecule/particle optical spectroscopy and imaging Plasmonic and dielectric metamaterials; nanophotonics and nano-optics Biological imaging and sensing;

  2. MA.+'

    Office of Legacy Management (LM)

    ... B. S. Ellis, J. A. Kark, E. T. Loy, R. Ray, D. A. Roberts, W. H. Shinpaugh, T. R. ... After 1948, the Atomic Energy Commission surveyed the facility and performed decontamina- ...

  3. Machine learning helps discover the most luminous supernova in history

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Machine learning helps discover supernova Machine learning helps discover the most luminous supernova in history Machine-learning technology developed at Los Alamos National Laboratory played a key role in the discovery of supernova ASASSN-15lh. January 14, 2016 An artist's impression of the record-breaking superluminous supernova ASASSN-15lh as it would appear from an exoplanet located about 10,000 light years away in the host galaxy of the supernova. (Credit: Beijing Planetarium / Jin Ma) An

  4. Machine Learning Toolkit for Extreme Scale

    Energy Science and Technology Software Center (OSTI)

    2014-03-31

    Support Vector Machines (SVM) is a popular machine learning technique, which has been applied to a wide range of domains such as science, finance, and social networks for supervised learning. MaTEx undertakes the challenge of designing a scalable parallel SVM training algorithm for large scale systems, which includes commodity multi-core machines, tightly connected supercomputers and cloud computing systems. Several techniques are proposed for improved speed and memory space usage including adaptive and aggressive elimination ofmore » samples for faster convergence , and sparse format representation of data samples. Several heuristics for earliest possible to lazy elimination of non-contributing samples are considered in MaTEx. In many cases, where an early sample elimination might result in a false positive, low overhead mechanisms for reconstruction of key data structures are proposed. The proposed algorithm and heuristics are implemented and evaluated on various publicly available datasets« less

  5. MaRIE Name and Logo

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The MaRIE Name and Logo Explaining the MaRIE Name and Logo MaRIE is an acronym for "Matter-Radiation Interactions in Extreme" and honors a great scientist. Making, Measuring, and Modeling Materials» Multi-Probe Diagnostic Hall» Theory, Modeling and Computation» Accelerator Systems» Why MaRIE?: The MaRIE/Madame Curie relationship Marie Curie Los Alamos National Laboratory's flagship facility concept, MaRIE, stands for Matter-Radiation Interactions in Extremes. It is also named after

  6. Induction machine

    DOE Patents [OSTI]

    Owen, Whitney H.

    1980-01-01

    A polyphase rotary induction machine for use as a motor or generator utilizing a single rotor assembly having two series connected sets of rotor windings, a first stator winding disposed around the first rotor winding and means for controlling the current induced in one set of the rotor windings compared to the current induced in the other set of the rotor windings. The rotor windings may be wound rotor windings or squirrel cage windings.

  7. Laser machining of explosives

    DOE Patents [OSTI]

    Perry, Michael D.; Stuart, Brent C.; Banks, Paul S.; Myers, Booth R.; Sefcik, Joseph A.

    2000-01-01

    The invention consists of a method for machining (cutting, drilling, sculpting) of explosives (e.g., TNT, TATB, PETN, RDX, etc.). By using pulses of a duration in the range of 5 femtoseconds to 50 picoseconds, extremely precise and rapid machining can be achieved with essentially no heat or shock affected zone. In this method, material is removed by a nonthermal mechanism. A combination of multiphoton and collisional ionization creates a critical density plasma in a time scale much shorter than electron kinetic energy is transferred to the lattice. The resulting plasma is far from thermal equilibrium. The material is in essence converted from its initial solid-state directly into a fully ionized plasma on a time scale too short for thermal equilibrium to be established with the lattice. As a result, there is negligible heat conduction beyond the region removed resulting in negligible thermal stress or shock to the material beyond a few microns from the laser machined surface. Hydrodynamic expansion of the plasma eliminates the need for any ancillary techniques to remove material and produces extremely high quality machined surfaces. There is no detonation or deflagration of the explosive in the process and the material which is removed is rendered inert.

  8. Roadmap to MaRIE November 2015

    SciTech Connect (OSTI)

    Barnes, Cris William

    2015-11-23

    This report describes MaRIE experimental facility in the November 2015 issue of their Science and Technology newsletter.

  9. LAMPF TO MaRIE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LAMPF TO MaRIE Los Alamos National Laboratory - 70 Years of Science and Beyond E X P E R I M E N T A L P H Y S I C A L S C I E N C E S Through the science of making, measuring, and modeling, the people of Los Alamos National Laboratory discover breakthrough solutions to the most pressing national security challenges. PEOPLE BEHIND THE SCIENCE AND TECHNOLOGY LOS ALAMOS MILESTONES THE EVOLUTION OF LOS ALAMOS SIGNATURE FACILITIES EXPERTISE AND ACHIEVEMENTS IN MAKING, MEASURING, AND MODELING This

  10. Electrical machine

    DOE Patents [OSTI]

    De Bock, Hendrik Pieter Jacobus; Alexander, James Pellegrino; El-Refaie, Ayman Mohamed Fawzi; Gerstler, William Dwight; Shah, Manoj Ramprasad; Shen, Xiaochun

    2016-06-21

    An apparatus, such as an electrical machine, is provided. The apparatus can include a rotor defining a rotor bore and a conduit disposed in and extending axially along the rotor bore. The conduit can have an annular conduit body defining a plurality of orifices disposed axially along the conduit and extending through the conduit body. The rotor can have an inner wall that at least partially defines the rotor bore. The orifices can extend through the conduit body along respective orifice directions, and the rotor and conduit can be configured to provide a line of sight along the orifice direction from the respective orifices to the inner wall.

  11. Johnston LFG (MA RPS Biomass Facility | Open Energy Information

    Open Energy Info (EERE)

    LFG (MA RPS Biomass Facility Jump to: navigation, search Name Johnston LFG (MA RPS Biomass Facility Facility Johnston LFG (MA RPS Sector Biomass Facility Type Landfill Gas Location...

  12. 2014 Annual Merit Review Results Report - Power Electronics and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Power Electronics and Electrical Machines Technologies 2014 Annual Merit Review Results Report - Power Electronics and Electrical Machines Technologies Merit review of DOE Vehicle ...

  13. 2011 Annual Merit Review Results Report - Power Electronics and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Power Electronics and Electrical Machines Technologies 2011 Annual Merit Review Results Report - Power Electronics and Electrical Machines Technologies Merit review of DOE Vehicle ...

  14. 2012 Annual Merit Review Results Report - Power Electronics and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Power Electronics and Electrical Machines Technologies 2012 Annual Merit Review Results Report - Power Electronics and Electrical Machines Technologies Merit review of DOE Vehicle ...

  15. 2013 Annual Merit Review Results Report - Power Electronics and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Power Electronics and Electrical Machines Technologies 2013 Annual Merit Review Results Report - Power Electronics and Electrical Machines Technologies Merit review of DOE Vehicle ...

  16. EV Everywhere Grand Challenge - Electric Drive (Power Electronics...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - Electric Drive (Power Electronics and Electric Machines) Workshop EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop List of ...

  17. MA - Office of Management - Energy Conservation Plan

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    MA Energy Conservation Plan January 2010 1 Office of Management Office-Level Energy Conservation Plan January 2010 I. BACKGROUND This energy conservation plan represents an effort to reduce energy consumption within Office of Management (MA) office spaces and to increase employee awareness of and participation in energy conservation measures. II. SCOPE The plan and procedures in this document apply to all Office of Management (MA) office suites in the Forrestal and Germantown Facilities as well

  18. MA Org Chart, March 22, 2016

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Rebecca Montoya, Dep. Director- Admin Svcs. Office of Administrative Management and Support Office of Logistics and Facility Operations Office Travel Management MA-45 Umeki Thorne, ...

  19. InThrMa | Open Energy Information

    Open Energy Info (EERE)

    Softwaremodeling tools User Interface: Website, Mobile Device Website: www.inthrma.com Web Application Link: www.inthrma.com Cost: Paid Language: English InThrMa Screenshot...

  20. Celestial Mystery Machine

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Celestial Mystery Machine 1663 Los Alamos science and technology magazine Latest Issue:October 2015 past issues All Issues submit Celestial Mystery Machine High-energy gamma...

  1. DOE - Office of Legacy Management -- Tracerlab Inc - MA 11

    Office of Legacy Management (LM)

    Tracerlab Inc - MA 11 FUSRAP Considered Sites Site: TRACERLAB, INC. (MA.11 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: 130 High Street , Boston , Massachusetts MA.11-1 Evaluation Year: 1987 MA.11-3 Site Operations: Research and development regarding uranium irradiation and cesium blocks during the early 1950s. MA.11-1 MA.11-3 Site Disposition: Eliminated - NRC licensed MA.11-2 MA.11-3 Radioactive Materials Handled: Yes

  2. DOE - Office of Legacy Management -- Harvard University Electron

    Office of Legacy Management (LM)

    Accelerator - MA 05 Harvard University Electron Accelerator - MA 05 FUSRAP Considered Sites Site: Harvard University Electron Accelerator (MA.05 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: Cambridge , Massachusetts MA.05-1 Evaluation Year: 1987 MA.05-1 Site Operations: Facility performed research in support of AEC and MED utilizing small quantities of radioactive materials in a controlled environment. MA.05-1 Site

  3. DOE - Office of Legacy Management -- Shpack Landfill - MA 06

    Office of Legacy Management (LM)

    Shpack Landfill - MA 06 FUSRAP Considered Sites Shpack Landfill, NY Alternate Name(s): Attleboro, MA Metals and Controls Site Norton Landfill area MA.06-2 MA.06-3 Location: 68 Union Road, Norton, Massachusetts MA.06-2 Historical Operations: No AEC activities were conducted on site. Contamination was suspected from disposal of materials containing uranium and zirconium ash. MA.06-2 MA.06-3 Eligibility Determination: Eligible MA.06-1 Radiological Survey(s): Assessment Surveys MA.06-4 MA.06-5

  4. DOE - Office of Legacy Management -- Fenwal Inc - MA 14

    Office of Legacy Management (LM)

    Fenwal Inc - MA 14 FUSRAP Considered Sites Site: Fenwal, Inc. (MA.14 ) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: Ashland , Massachusetts MA.14-1 Evaluation Year: 1994 MA.14-2 MA.14-3 Site Operations: Performed pilot scale explosion suppression tests on uranium contaminated magnesium fluoride powder in the late 1960s. MA.14-1 MA.14-3 Site Disposition: Eliminated - Potential for contamination considered remote based on the limited

  5. DOE - Office of Legacy Management -- National Fireworks Ordnance Corp - MA

    Office of Legacy Management (LM)

    13 Fireworks Ordnance Corp - MA 13 FUSRAP Considered Sites Site: NATIONAL FIREWORKS ORDNANCE CORP (MA.13) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: American Potash and Chemical Corporation MA.13-3 Location: West Hanover , Massachusetts MA.13-1 Evaluation Year: 1991 MA.13-1 Site Operations: Performed bench scale research and development on uranium forming during the 1960s. MA.13-2 MA.13-3 Site Disposition: Eliminated - Potential for

  6. Novel Flux Coupling Machine without Permanent Magnets - U Machine...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Magnets - U Machine Novel Flux Coupling Machine without Permanent Magnets - U Machine 2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer ...

  7. Electron

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    density measurement by differential interferometry W. X. Ding, D. L. Brower, B. H. Deng, and T. Yates Electrical Engineering Department, University of California-Los Angeles, Los Angeles, California 90095 ͑Received 5 May 2006; presented on 10 May 2006; accepted 16 June 2006; published online 26 September 2006͒ A novel differential interferometer is being developed to measure the electron density gradient and its fluctuations. Two separate laser beams with slight spatial offset and frequency

  8. Stirling machine operating experience

    SciTech Connect (OSTI)

    Ross, B.; Dudenhoefer, J.E.

    1991-01-01

    Numerous Stirling machines have been built and operated, but the operating experience of these machines is not well known. It is important to examine this operating experience in detail, because it largely substantiates the claim that Stirling machines are capable of reliable and lengthy lives. The amount of data that exists is impressive, considering that many of the machines that have been built are developmental machines intended to show proof of concept, and were not expected to operate for any lengthy period of time. Some Stirling machines (typically free-piston machines) achieve long life through non-contact bearings, while other Stirling machines (typically kinematic) have achieved long operating lives through regular seal and bearing replacements. In addition to engine and system testing, life testing of critical components is also considered.

  9. Physics Informed Machine Learning

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Physics Informed Machine Learning Physics Informed Machine Learning WHEN: Jan 19, 2016 8:00 AM - Jan 22, 2016 4:00 PM WHERE: Inn at Loretto, Santa Fe CATEGORY: Science TYPE:...

  10. MA Org Chart, June 2 Rev. 1, 2016

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    MA-1 Ingrid Kolb, Director Laurie Morman, Chief of Staff Office of Resource Management and Planning MA-1.1 Marilyn Dillon, Director Sandra Hersh, Dep. Director Office of Scheduling and Advance Charles Quintero, Director MA-10 MA-70 Office of Executive Secretariat Amy B. Demagistris, Director Office of Policy Analysis Michael Coogan Office of Correspondence Management Steven Johnsen MA-72 Administration, MIS, and Executive Commitments Group Shena Kennerly MA-74 Office of History and Archives

  11. DOE - Office of Legacy Management -- Norton Co - MA 12

    Office of Legacy Management (LM)

    Norton Co - MA 12 FUSRAP Considered Sites Site: NORTON CO. (MA.12) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: 1 New Bond Street , Worcester , Massachusetts MA.12-1 Evaluation Year: 1987 MA.12-3 Site Operations: Manufactured refractory products using thorium and uranium metal. MA.12-3 MA.12-4 Site Disposition: Eliminated - NRC licensed - Potential for contamination considered remote based on the limited scope of activities

  12. DOE - Office of Legacy Management -- Woburn Landfill - MA 07

    Office of Legacy Management (LM)

    Woburn Landfill - MA 07 FUSRAP Considered Sites Site: Woburn Landfill (MA.07) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: Woburn , Massachusetts MA.07-2 Evaluation Year: 1987 MA.07-6 Site Operations: The National Lead Company, Inc. disposed of approximately fifty 55-gallon drums of low grade uranium ore in at this site in 1960. MA.07-2 MA.07-4 Site Disposition: Eliminated - Conditions determined meet applicable requirements

  13. Electron

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Electron thermal transport within magnetic islands in the reversed-field pinch a... H. D. Stephens, 1,b͒ D. J. Den Hartog, 1,3 C. C. Hegna, 1,2 and J. A. Reusch 1 1 Department of Physics, University of Wisconsin-Madison, 1150 University Ave., Madison, Wisconsin 53706, USA 2 Department of Engineering Physics, University of Wisconsin-Madison, 1500 Engineering Drive, Madison, Wisconsin 53706, USA 3 Center for Magnetic Self-Organization in Laboratory and Astrophysical Plasmas, University of

  14. PARS II Enhancements - Igor Pedan, MA-63 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Enhancements - Igor Pedan, MA-63 PARS II Enhancements - Igor Pedan, MA-63 2014 DOE Project Management Workshop PDF icon 28PedanPARSII Enhancements.pdf More Documents & ...

  15. MaRIE: An experimental facility concept revolutionizing materials...

    Office of Scientific and Technical Information (OSTI)

    MaRIE: An experimental facility concept revolutionizing materials in extremes Citation Details In-Document Search Title: MaRIE: An experimental facility concept revolutionizing...

  16. MaRIE theory, modeling and computation roadmap executive summary...

    Office of Scientific and Technical Information (OSTI)

    Conference: MaRIE theory, modeling and computation roadmap executive summary Citation Details In-Document Search Title: MaRIE theory, modeling and computation roadmap executive ...

  17. High field electron paramagnetic resonance spectroscopy under ultrahigh vacuum conditionsA multipurpose machine to study paramagnetic species on well defined single crystal surfaces

    SciTech Connect (OSTI)

    Rocker, J.; Cornu, D.; Kieseritzky, E.; Hnsel-Ziegler, W.; Freund, H.-J.; Seiler, A.; Bondarchuk, O.

    2014-08-01

    A new ultrahigh vacuum (UHV) electron paramagnetic resonance (EPR) spectrometer operating at 94 GHz to investigate paramagnetic centers on single crystal surfaces is described. It is particularly designed to study paramagnetic centers on well-defined model catalysts using epitaxial thin oxide films grown on metal single crystals. The EPR setup is based on a commercial Bruker E600 spectrometer, which is adapted to ultrahigh vacuum conditions using a home made Fabry Perot resonator. The key idea of the resonator is to use the planar metal single crystal required to grow the single crystalline oxide films as one of the mirrors of the resonator. EPR spectroscopy is solely sensitive to paramagnetic species, which are typically minority species in such a system. Hence, additional experimental characterization tools are required to allow for a comprehensive investigation of the surface. The apparatus includes a preparation chamber hosting equipment, which is required to prepare supported model catalysts. In addition, surface characterization tools such as low energy electron diffraction (LEED)/Auger spectroscopy, temperature programmed desorption (TPD), and infrared reflection absorption spectroscopy (IRAS) are available to characterize the surfaces. A second chamber used to perform EPR spectroscopy at 94 GHz has a room temperature scanning tunneling microscope attached to it, which allows for real space structural characterization. The heart of the UHV adaptation of the EPR experiment is the sealing of the Fabry-Perot resonator against atmosphere. To this end it is possible to use a thin sapphire window glued to the backside of the coupling orifice of the Fabry Perot resonator. With the help of a variety of stabilization measures reducing vibrations as well as thermal drift it is possible to accumulate data for a time span, which is for low temperature measurements only limited by the amount of liquid helium. Test measurements show that the system can detect paramagnetic

  18. 2013 Annual Merit Review Results Report - Power Electronics and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electronics and Electrical Machines Technologies Alnico and Ferrite Hybrid Excitation Electric Machines Vehicle Technologies Office Merit Review 2015: Development of Radically...

  19. 2010 DOE EERE Vehicle Technologies Program Merit Review - Power Electronics

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Electrical Machines | Department of Energy Power Electronics and Electrical Machines 2010 DOE EERE Vehicle Technologies Program Merit Review - Power Electronics and Electrical Machines APEEM research and development merit review results 2010_amr_03.pdf (1.38 MB) More Documents & Publications 2012 Annual Merit Review Results Report - Power Electronics and Electrical Machines Technologies 2011 Annual Merit Review Results Report - Power Electronics and Electrical Machines Technologies

  20. Machine tool locator

    DOE Patents [OSTI]

    Hanlon, John A.; Gill, Timothy J.

    2001-01-01

    Machine tools can be accurately measured and positioned on manufacturing machines within very small tolerances by use of an autocollimator on a 3-axis mount on a manufacturing machine and positioned so as to focus on a reference tooling ball or a machine tool, a digital camera connected to the viewing end of the autocollimator, and a marker and measure generator for receiving digital images from the camera, then displaying or measuring distances between the projection reticle and the reference reticle on the monitoring screen, and relating the distances to the actual position of the autocollimator relative to the reference tooling ball. The images and measurements are used to set the position of the machine tool and to measure the size and shape of the machine tool tip, and examine cutting edge wear. patent

  1. DOE - Office of Legacy Management -- Manufacturing Laboratories Inc - MA

    Office of Legacy Management (LM)

    0-04 Manufacturing Laboratories Inc - MA 0-04 FUSRAP Considered Sites Site: MANUFACTURING LABORATORIES, INC. (MA.0-04 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: 272 Northampton Street , Boston , Massachusetts MA.0-04-1 Evaluation Year: 1987 MA.0-04-3 Site Operations: Developed a process for making projectiles from depleted uranium during the early 1950s. MA.0-04-3 Site Disposition: Eliminated - Potential for

  2. Physics Informed Machine Learning

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Physics Informed Machine Learning Physics Informed Machine Learning WHEN: Jan 19, 2016 8:00 AM - Jan 22, 2016 4:00 PM WHERE: Inn at Loretto, Santa Fe CATEGORY: Science TYPE: Conference INTERNAL: Calendar Login Event Description A revolution in statistics and machine learning (ML) is underway. Modern algorithms can now learn high level abstractions via hierarchical models, leading to breakthrough accuracies in benchmarks for computer vision, language, etc. Underlying these advances is a strong

  3. Diamond machine tool face lapping machine

    DOE Patents [OSTI]

    Yetter, H.H.

    1985-05-06

    An apparatus for shaping, sharpening and polishing diamond-tipped single-point machine tools. The isolation of a rotating grinding wheel from its driving apparatus using an air bearing and causing the tool to be shaped, polished or sharpened to be moved across the surface of the grinding wheel so that it does not remain at one radius for more than a single rotation of the grinding wheel has been found to readily result in machine tools of a quality which can only be obtained by the most tedious and costly processing procedures, and previously unattainable by simple lapping techniques.

  4. Stirling machine operating experience

    SciTech Connect (OSTI)

    Ross, B.; Dudenhoefer, J.E.

    1994-09-01

    Numerous Stirling machines have been built and operated, but the operating experience of these machines is not well known. It is important to examine this operating experience in detail, because it largely substantiates the claim that stirling machines are capable of reliable and lengthy operating lives. The amount of data that exists is impressive, considering that many of the machines that have been built are developmental machines intended to show proof of concept, and are not expected to operate for lengthy periods of time. Some Stirling machines (typically free-piston machines) achieve long life through non-contact bearings, while other Stirling machines (typically kinematic) have achieved long operating lives through regular seal and bearing replacements. In addition to engine and system testing, life testing of critical components is also considered. The record in this paper is not complete, due to the reluctance of some organizations to release operational data and because several organizations were not contacted. The authors intend to repeat this assessment in three years, hoping for even greater participation.

  5. redMaGiC. Selecting Luminous Red Galaxies from the DES Science Verification Data

    SciTech Connect (OSTI)

    Rozo, E.

    2015-07-20

    We introduce redMaGiC, an automated algorithm for selecting Luminous Red Galaxies (LRGs). The algorithm was developed to minimize photometric redshift uncertainties in photometric large-scale structure studies. redMaGiC achieves this by self-training the color-cuts necessary to produce a luminosity-thresholded LRG sam- ple of constant comoving density. Additionally, we demonstrate that redMaGiC photo-zs are very nearly as accurate as the best machine-learning based methods, yet they require minimal spectroscopic training, do not suffer from extrapolation biases, and are very nearly Gaussian. We apply our algorithm to Dark Energy Survey (DES) Science Verification (SV) data to produce a redMaGiC catalog sampling the redshift range z ϵ [0.2,0.8]. Our fiducial sample has a comoving space density of 10-3 (h-1Mpc)-3, and a median photo-z bias (zspec zphoto) and scatter (σz=(1 + z)) of 0.005 and 0.017 respectively.The corresponding 5σ outlier fraction is 1.4%. We also test our algorithm with Sloan Digital Sky Survey (SDSS) Data Release 8 (DR8) and Stripe 82 data, and discuss how spectroscopic training can be used to control photo-z biases at the 0.1% level.

  6. Advanced Power Electronics and Electric Machines

    Office of Energy Efficiency and Renewable Energy (EERE)

    2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C.

  7. SE-MA-NO Electric Coop | Open Energy Information

    Open Energy Info (EERE)

    SE-MA-NO Electric Coop Jump to: navigation, search Name: SE-MA-NO Electric Coop Place: Missouri Phone Number: (417) 924-3291 Website: www.semano.com Facebook: https:...

  8. DOE - Office of Legacy Management -- Nuclear Metals Inc - MA 09

    Office of Legacy Management (LM)

    Metals Inc - MA 09 FUSRAP Considered Sites Site: NUCLEAR METALS, INC. (MA.09) Eliminated from consideration under FUSRAP - Licensed facility - included in NRC action plan (Site Decommissioning Management Plan) in 1990 for cleanup Designated Name: Not Designated Alternate Name: None Location: 1555 Massachusetts Ave. , Cambridge , Massachusetts MA.09-2 Evaluation Year: 1987 MA.09-1 Site Operations: Produced natural uranium tubes for Savannah River reactor program and fabricated power reactor fuel

  9. Office of Information Resources (MA-90) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Resources (MA-90) Office of Information Resources (MA-90) Freedom of Information 2007 Annual Report Office of Information Resources (MA-90) (220.69 KB) More Documents & Publications ANNUAL FOIA REPORT FOR 2009 U.S. Department of Energy 2008 Annual FOIA Report Microsoft Word - 2005 FOIA ANNUAL REPORT.doc

  10. Data Machine Independence

    Energy Science and Technology Software Center (OSTI)

    1994-12-30

    Data-machine independence achieved by using four technologies (ASN.1, XDR, SDS, and ZEBRA) has been evaluated by encoding two different applications in each of the above; and their results compared against the standard programming method using C.

  11. Human-machine interactions

    DOE Patents [OSTI]

    Forsythe, J. Chris; Xavier, Patrick G.; Abbott, Robert G.; Brannon, Nathan G.; Bernard, Michael L.; Speed, Ann E.

    2009-04-28

    Digital technology utilizing a cognitive model based on human naturalistic decision-making processes, including pattern recognition and episodic memory, can reduce the dependency of human-machine interactions on the abilities of a human user and can enable a machine to more closely emulate human-like responses. Such a cognitive model can enable digital technology to use cognitive capacities fundamental to human-like communication and cooperation to interact with humans.

  12. Doubly fed induction machine

    DOE Patents [OSTI]

    Skeist, S. Merrill; Baker, Richard H.

    2005-10-11

    An electro-mechanical energy conversion system coupled between an energy source and an energy load including an energy converter device having a doubly fed induction machine coupled between the energy source and the energy load to convert the energy from the energy source and to transfer the converted energy to the energy load and an energy transfer multiplexer coupled to the energy converter device to control the flow of power or energy through the doubly fed induction machine.

  13. Metalworking and machining fluids

    DOE Patents [OSTI]

    Erdemir, Ali; Sykora, Frank; Dorbeck, Mark

    2010-10-12

    Improved boron-based metal working and machining fluids. Boric acid and boron-based additives that, when mixed with certain carrier fluids, such as water, cellulose and/or cellulose derivatives, polyhydric alcohol, polyalkylene glycol, polyvinyl alcohol, starch, dextrin, in solid and/or solvated forms result in improved metalworking and machining of metallic work pieces. Fluids manufactured with boric acid or boron-based additives effectively reduce friction, prevent galling and severe wear problems on cutting and forming tools.

  14. Sealing intersecting vane machines

    DOE Patents [OSTI]

    Martin, Jedd N.; Chomyszak, Stephen M.

    2007-06-05

    The invention provides a toroidal intersecting vane machine incorporating intersecting rotors to form primary and secondary chambers whose porting configurations minimize friction and maximize efficiency. Specifically, it is an object of the invention to provide a toroidal intersecting vane machine that greatly reduces the frictional losses through intersecting surfaces without the need for external gearing by modifying the width of one or both tracks at the point of intermeshing. The inventions described herein relate to these improvements.

  15. Sealing intersecting vane machines

    DOE Patents [OSTI]

    Martin, Jedd N.; Chomyszak, Stephen M.

    2005-06-07

    The invention provides a toroidal intersecting vane machine incorporating intersecting rotors to form primary and secondary chambers whose porting configurations minimize friction and maximize efficiency. Specifically, it is an object of the invention to provide a toroidal intersecting vane machine that greatly reduces the frictional losses through intersecting surfaces without the need for external gearing by modifying the width of one or both tracks at the point of intermeshing. The inventions described herein relate to these improvements.

  16. Reactor refueling machine simulator

    SciTech Connect (OSTI)

    Rohosky, T.L.; Swidwa, K.J.

    1987-10-13

    This patent describes in combination: a nuclear reactor; a refueling machine having a bridge, trolley and hoist each driven by a separate motor having feedback means for generating a feedback signal indicative of movement thereof. The motors are operable to position the refueling machine over the nuclear reactor for refueling the same. The refueling machine also has a removable control console including means for selectively generating separate motor signals for operating the bridge, trolley and hoist motors and for processing the feedback signals to generate an indication of the positions thereof, separate output leads connecting each of the motor signals to the respective refueling machine motor, and separate input leads for connecting each of the feedback means to the console; and a portable simulator unit comprising: a single simulator motor; a single simulator feedback signal generator connected to the simulator motor for generating a simulator feedback signal in response to operation of the simulator motor; means for selectively connecting the output leads of the console to the simulator unit in place of the refueling machine motors, and for connecting the console input leads to the simulator unit in place of the refueling machine motor feedback means; and means for driving the single simulator motor in response to any of the bridge, trolley or hoist motor signals generated by the console and means for applying the simulator feedback signal to the console input lead associated with the motor signal being generated by the control console.

  17. Methods and apparatus for controlling rotary machines

    SciTech Connect (OSTI)

    Bagepalli, Bharat Sampathkumaran; Jansen, Patrick Lee; Barnes, Gary R.; Fric, Thomas Frank; Lyons, James Patrick Francis; Pierce, Kirk Gee; Holley, William Edwin; Barbu, Corneliu

    2009-09-01

    A control system for a rotary machine is provided. The rotary machine has at least one rotating member and at least one substantially stationary member positioned such that a clearance gap is defined between a portion of the rotating member and a portion of the substantially stationary member. The control system includes at least one clearance gap dimension measurement apparatus and at least one clearance gap adjustment assembly. The adjustment assembly is coupled in electronic data communication with the measurement apparatus. The control system is configured to process a clearance gap dimension signal and modulate the clearance gap dimension.

  18. Agile Machining and Inspection Non-Nuclear Report (NNR) Project

    SciTech Connect (OSTI)

    Lazarus, Lloyd

    2009-02-19

    This report is a high level summary of the eight major projects funded by the Agile Machining and Inspection Non-Nuclear Readiness (NNR) project (FY06.0422.3.04.R1). The largest project of the group is the Rapid Response project in which the six major sub categories are summarized. This project focused on the operations of the machining departments that will comprise Special Applications Machining (SAM) in the Kansas City Responsive Infrastructure Manufacturing & Sourcing (KCRIMS) project. This project was aimed at upgrading older machine tools, developing new inspection tools, eliminating Classified Removable Electronic Media (CREM) in the handling of classified Numerical Control (NC) programs by installing the CRONOS network, and developing methods to automatically load Coordinated-Measuring Machine (CMM) inspection data into bomb books and product score cards. Finally, the project personnel leaned perations of some of the machine tool cells, and now have the model to continue this activity.

  19. DOE - Office of Legacy Management -- Watertown Arsenal - MA 02

    Office of Legacy Management (LM)

    Watertown Arsenal - MA 02 FUSRAP Considered Sites Site: WATERTOWN ARSENAL (MA.02 ) Eliminated from consideration under FUSRAP - Referred to EPA, State of Massachusetts, and the NRC Designated Name: Not Designated Alternate Name: None Location: Building Site 421 , Watertown , Massachusetts MA.02-1 Evaluation Year: 1985 MA.02-2 MA.02-3 Site Operations: Building 421 was used in the late 1940's and early 1950's by M.I.T. under Contract #AT (30-1)-956 for work on African Ores, and a modified

  20. Identification and characterization of novel NuMA isoforms

    SciTech Connect (OSTI)

    Wu, Jin; Xu, Zhe; He, Dacheng; Lu, Guanting

    2014-11-21

    Highlights: • Seven NuMA isoforms generated by alternative splicing were categorized into 3 groups: long, middle and short. • Both exons 15 and 16 in long NuMA were “hotspot” for alternative splicing. • Lower expression of short NuMA was observed in cancer cells compared with nonneoplastic controls. • Distinct localization pattern of short isoforms indicated different function from that of long and middle NuMA. - Abstract: The large nuclear mitotic apparatus (NuMA) has been investigated for over 30 years with functions related to the formation and maintenance of mitotic spindle poles during mitosis. However, the existence and functions of NuMA isoforms generated by alternative splicing remains unclear. In the present work, we show that at least seven NuMA isoforms (categorized into long, middle and short groups) generated by alternative splicing from a common NuMA mRNA precursor were discovered in HeLa cells and these isoforms differ mainly at the carboxyl terminus and the coiled-coil domains. Two “hotspot” exons with molecular mass of 3366-nt and 42-nt tend to be spliced during alternative splicing in long and middle groups. Furthermore, full-length coding sequences of long and middle NuMA obtained by using fusion PCR were constructed into GFP-tagged vector to illustrate their cellular localization. Long NuMA mainly localized in the nucleus with absence from nucleoli during interphase and translocated to the spindle poles in mitosis. Middle NuMA displayed the similar cell cycle-dependent distribution pattern as long NuMA. However, expression of NuMA short isoforms revealed a distinct subcellular localization. Short NuMA were present in the cytosol during the whole cycle, without colocalization with mitotic apparatus. These results have allowed us tentatively to explore a new research direction for NuMA’s various functions.

  1. 2011 Annual Merit Review Results Report - Power Electronics and Electrical

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Machines Technologies | Department of Energy Power Electronics and Electrical Machines Technologies 2011 Annual Merit Review Results Report - Power Electronics and Electrical Machines Technologies Merit review of DOE Vehicle Technologies research activities 2011_amr_03.pdf (5.61 MB) More Documents & Publications 2012 Annual Merit Review Results Report - Power Electronics and Electrical Machines Technologies 2010 DOE EERE Vehicle Technologies Program Merit Review - Power Electronics and

  2. 2012 Annual Merit Review Results Report - Power Electronics and Electrical

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Machines Technologies | Department of Energy Power Electronics and Electrical Machines Technologies 2012 Annual Merit Review Results Report - Power Electronics and Electrical Machines Technologies Merit review of DOE Vehicle Technologies research activities 2012_amr_03.pdf (5.68 MB) More Documents & Publications 2011 Annual Merit Review Results Report - Power Electronics and Electrical Machines Technologies 2010 DOE EERE Vehicle Technologies Program Merit Review - Power Electronics and

  3. Electron Microscope Facility

    ScienceCinema (OSTI)

    None

    2010-01-08

    Brookhaven Lab is home to one of only a few Scanning Transmision Electron Microscope (STEM) machines in the world and one of the few that can image single heavy atoms.

  4. Extreme ultraviolet lithography machine

    DOE Patents [OSTI]

    Tichenor, Daniel A.; Kubiak, Glenn D.; Haney, Steven J.; Sweeney, Donald W.

    2000-01-01

    An extreme ultraviolet lithography (EUVL) machine or system for producing integrated circuit (IC) components, such as transistors, formed on a substrate. The EUVL machine utilizes a laser plasma point source directed via an optical arrangement onto a mask or reticle which is reflected by a multiple mirror system onto the substrate or target. The EUVL machine operates in the 10-14 nm wavelength soft x-ray photon. Basically the EUV machine includes an evacuated source chamber, an evacuated main or project chamber interconnected by a transport tube arrangement, wherein a laser beam is directed into a plasma generator which produces an illumination beam which is directed by optics from the source chamber through the connecting tube, into the projection chamber, and onto the reticle or mask, from which a patterned beam is reflected by optics in a projection optics (PO) box mounted in the main or projection chamber onto the substrate. In one embodiment of a EUVL machine, nine optical components are utilized, with four of the optical components located in the PO box. The main or projection chamber includes vibration isolators for the PO box and a vibration isolator mounting for the substrate, with the main or projection chamber being mounted on a support structure and being isolated.

  5. Micro-machined resonator

    DOE Patents [OSTI]

    Godshall, Ned A.; Koehler, Dale R.; Liang, Alan Y.; Smith, Bradley K.

    1993-01-01

    A micro-machined resonator, typically quartz, with upper and lower micro-machinable support members, or covers, having etched wells which may be lined with conductive electrode material, between the support members is a quartz resonator having an energy trapping quartz mesa capacitively coupled to the electrode through a diaphragm; the quartz resonator is supported by either micro-machined cantilever springs or by thin layers extending over the surfaces of the support. If the diaphragm is rigid, clock applications are available, and if the diaphragm is resilient, then transducer applications can be achieved. Either the thin support layers or the conductive electrode material can be integral with the diaphragm. In any event, the covers are bonded to form a hermetic seal and the interior volume may be filled with a gas or may be evacuated. In addition, one or both of the covers may include oscillator and interface circuitry for the resonator.

  6. Micro-machined resonator

    DOE Patents [OSTI]

    Godshall, N.A.; Koehler, D.R.; Liang, A.Y.; Smith, B.K.

    1993-03-30

    A micro-machined resonator, typically quartz, with upper and lower micro-machinable support members, or covers, having etched wells which may be lined with conductive electrode material, between the support members is a quartz resonator having an energy trapping quartz mesa capacitively coupled to the electrode through a diaphragm; the quartz resonator is supported by either micro-machined cantilever springs or by thin layers extending over the surfaces of the support. If the diaphragm is rigid, clock applications are available, and if the diaphragm is resilient, then transducer applications can be achieved. Either the thin support layers or the conductive electrode material can be integral with the diaphragm. In any event, the covers are bonded to form a hermetic seal and the interior volume may be filled with a gas or may be evacuated. In addition, one or both of the covers may include oscillator and interface circuitry for the resonator.

  7. Automated fiber pigtailing machine

    DOE Patents [OSTI]

    Strand, O.T.; Lowry, M.E.

    1999-01-05

    The Automated Fiber Pigtailing Machine (AFPM) aligns and attaches optical fibers to optoelectronic (OE) devices such as laser diodes, photodiodes, and waveguide devices without operator intervention. The so-called pigtailing process is completed with sub-micron accuracies in less than 3 minutes. The AFPM operates unattended for one hour, is modular in design and is compatible with a mass production manufacturing environment. This machine can be used to build components which are used in military aircraft navigation systems, computer systems, communications systems and in the construction of diagnostics and experimental systems. 26 figs.

  8. Automated fiber pigtailing machine

    DOE Patents [OSTI]

    Strand, Oliver T.; Lowry, Mark E.

    1999-01-01

    The Automated Fiber Pigtailing Machine (AFPM) aligns and attaches optical fibers to optoelectonic (OE) devices such as laser diodes, photodiodes, and waveguide devices without operator intervention. The so-called pigtailing process is completed with sub-micron accuracies in less than 3 minutes. The AFPM operates unattended for one hour, is modular in design and is compatible with a mass production manufacturing environment. This machine can be used to build components which are used in military aircraft navigation systems, computer systems, communications systems and in the construction of diagnostics and experimental systems.

  9. Precision Robotic Assembly Machine

    ScienceCinema (OSTI)

    None

    2010-09-01

    The world's largest laser system is the National Ignition Facility (NIF), located at Lawrence Livermore National Laboratory. NIF's 192 laser beams are amplified to extremely high energy, and then focused onto a tiny target about the size of a BB, containing frozen hydrogen gas. The target must be perfectly machined to incredibly demanding specifications. The Laboratory's scientists and engineers have developed a device called the "Precision Robotic Assembly Machine" for this purpose. Its unique design won a prestigious R&D-100 award from R&D Magazine.

  10. MACHINE AND FOUNDRY COMPANY

    Office of Legacy Management (LM)

    MACHINE AND FOUNDRY COMPANY kt '- : :'~ ENGINEERING DIVISIOJ ---. Cl FIELD iRIP ,REP@?T ,' ~ i;~:z;~zy~ MEETING REPORT : .I.-.-' ~Y ::,:I :. &, .I7 ENGINEERING REPORT- : $T, ~ suBJ:m~i-c n-..*~~.~n~ 9r.1 _ P,Y.~.I~ ADDRESS: :'~.'"I .- .._ c. Plans for - ,:, ..-; .:.j s ,PERSON CONTACTED . . .' ., I : /LV cliq 22: PLPCZS w: - American Machine & Fouudq Co., i3ue Termlual. Office ;s& $' PRI?sI?,NT: S. P~:Chartland - DuPont D. B. Craxford - AW ..x.i "7.7, J. J* Crata - LHF 1, .

  11. Intersecting vane machines

    DOE Patents [OSTI]

    Bailey, H. Sterling; Chomyszak, Stephen M.

    2007-01-16

    The invention provides a toroidal intersecting vane machine incorporating intersecting rotors to form primary and secondary chambers whose porting configurations minimize friction and maximize efficiency. Specifically, it is an object of the invention to provide a toroidal intersecting vane machine that greatly reduces the frictional losses through meshing surfaces without the need for external gearing by modifying the function of one or the other of the rotors from that of "fluid moving" to that of "valving" thereby reducing the pressure loads and associated inefficiencies at the interface of the meshing surfaces. The inventions described herein relate to these improvements.

  12. Climate Time-Machine

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Climate Time-Machine Climate Time-Machine 20th Century Reanalysis Project Explores Earth's Past and Future Climate January 25, 2011 Berkeley Lab Contact: Jon Bashor, jbashor@lbl.gov, +1 510 486 5849 Wiley-Blackwell Contact: Ben Norman, lifesciencenews@wiley.com,+44(0)1243 770 375 Science Contact: Jeffrey Whitaker, Jeffrey.S.Whitaker@noaa.gov, +1 303 497 6313 2011-01-25-20C-Climate.jpg A dust storm approaching Stratford, TX on April 18, 1935. The 20th Century Reanalysis Project will provide

  13. Machine speech and speaking about machines

    SciTech Connect (OSTI)

    Nye, A.

    1996-12-31

    Current philosophy of language prides itself on scientific status. It boasts of being no longer contaminated with queer mental entities or idealist essences. It theorizes language as programmable variants of formal semantic systems, reimaginable either as the properly epiphenomenal machine functions of computer science or the properly material neural networks of physiology. Whether or not such models properly capture the physical workings of a living human brain is a question that scientists will have to answer. I, as a philosopher, come at the problem from another direction. Does contemporary philosophical semantics, in its dominant truth-theoretic and related versions, capture actual living human thought as it is experienced, or does it instead reflect, regardless of (perhaps dubious) scientific credentials, pathology of thought, a pathology with a disturbing social history.

  14. Office of Informaiton Resources (MA-90)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The report will be made available on the World Wide Web through the FOIA Home Page of the ... DC 20585 202-586-5955 B. The World Wide Web address to obtain an electronic copy of the ...

  15. Thermal Stress and Reliability for Advanced Power Electronics...

    Broader source: Energy.gov (indexed) [DOE]

    Thermal Stress and Reliability for Advanced Power Electronics and Electric Machines Power Electronic Thermal System Performance and Integration Thermal Performance and Reliability ...

  16. EDeMa (Smart Grid Project) | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Project Name EDeMa Country Germany Headquarters Location Mlheim, Germany Coordinates 51.427074, 6.886492 Loading map... "minzoom":false,"mapping...

  17. MHK Projects/GCK Technology Merrimack River Amesbury MA US |...

    Open Energy Info (EERE)

    Merrimack River Amesbury MA US < MHK Projects Jump to: navigation, search << Return to the MHK database homepage Loading map... "minzoom":false,"mappingservice":"googlemaps3","typ...

  18. MaRIE: An experimental facility concept revolutionizing materials...

    Office of Scientific and Technical Information (OSTI)

    concept revolutionizing materials in extremes Citation Details In-Document Search Title: MaRIE: An experimental facility concept revolutionizing materials in extremes Authors: ...

  19. THE EXECUTIVE SECRETARIAT, MA-70 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Organization chart for the Office of the Executive Secretariat, MA-70 PDF icon Office of the Executive Secretariat More Documents & Publications Office of Management Organization ...

  20. Radiation Protection Instrument Manual, Revision 1, PNL-MA-562

    SciTech Connect (OSTI)

    Johnson, Michelle Lynn

    2009-09-23

    PNL-MA-562 This manual provides specific information for operating and using portable radiological monitoring instruments available for use on the Hanford Site.

  1. Early time studies of cylindrical liner implosions at 1 MA on COBRA

    SciTech Connect (OSTI)

    Atoyan, L. Byvank, T. Cahill, A. D. Hoyt, C. L. Grouchy, P. W. L. de Potter, W. M. Kusse, B. R. Hammer, D. A.

    2014-12-15

    Tests of the magnetized liner inertial fusion (MagLIF) concept will make use of the 27 MA Z machine at Sandia National Laboratories, Albuquerque, to implode a cylindrical metal liner to compress and heat preheated, magnetized plasma contained within it. While most pulsed power machines produce much lower currents than the Z-machine, there are issues that can still be addressed on smaller scale facilities. Recent work on the Cornell Beam Research Accelerator (COBRA) has made use of 10 mm long and 4 mm diameter metal liners having different wall thicknesses to study the initiation of plasma on the liner’s surface as well as axial magnetic field compression [P.-A. Gourdain et al., Nucl. Fusion 53, 083006 (2013)]. This report presents experimental results with non-imploding liners, investigating the impact the liner’s surface structure has on initiation and ablation. Extreme ultraviolet (XUV) imaging and optical 12 frame camera imaging were used to observe and assess emission non-uniformities as they developed. Axial and side-on interferometry was used to determine the distribution of plasma near the liner surface, including the impact of non-uniformities during the plasma initiation and ablation phases of the experiments.

  2. Requirements for CEC POP machine protection system

    SciTech Connect (OSTI)

    Pinayev, I.

    2015-02-18

    The requirements of CEC POP machine protection system are meant to prevent damage to a vacuum chamber by a missteered electron beam. In this example, beam energy = 22 MeV, Maximal bunch charge = 5 nC, Maximal repetition rate = 78 kHz, Normalized emittance = 5 mm mrad, Minimal β-function = 1 m. From this information the requirements of the protection system can be calculated by factoring the information into equations to find beam densities and temperature excursions.

  3. Brilliant Machines | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    new window) Click to share on Tumblr (Opens in new window) Brilliant Machines Bradford Miller 2014.05.21 Are the machines of tomorrow really different from what we have now? Closed...

  4. 2013 Annual Merit Review Results Report - Power Electronics and Electrical

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Machines Technologies | Department of Energy Power Electronics and Electrical Machines Technologies 2013 Annual Merit Review Results Report - Power Electronics and Electrical Machines Technologies Merit review of DOE Vehicle Technologies research activities 2013_amr_03.pdf (5.87 MB) More Documents & Publications 2014 Annual Merit Review Results Report - Power Electronics and Electrical Machines Technologies Vehicle Technologies Office Merit Review 2016: Unique Lanthide-Free Motor

  5. 2014 Annual Merit Review Results Report - Power Electronics and Electrical

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Machines Technologies | Department of Energy Power Electronics and Electrical Machines Technologies 2014 Annual Merit Review Results Report - Power Electronics and Electrical Machines Technologies Merit review of DOE Vehicle Technologies research activities 2014_amr_03.pdf (3.56 MB) More Documents & Publications 2013 Annual Merit Review Results Report - Power Electronics and Electrical Machines Technologies Vehicle Technologies Office Merit Review 2015: Development of Radically Enhanced

  6. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2005-02-25

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. Rev. 0 marks the first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database.

  7. Power Electronic Thermal System Performance and Integration ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Motor Thermal Control Thermal Stress and Reliability for Advanced Power Electronics and Electric Machines Integrated Vehicle Thermal Management

  8. Magnetic field measurements via visible spectroscopy on the Z machine

    SciTech Connect (OSTI)

    Gomez, M. R. Hansen, S. B.; Peterson, K. J.; Bliss, D. E.; Carlson, A. L.; Lamppa, D. C.; Rochau, G. A.; Schroen, D. G.

    2014-11-15

    Sandia's Z Machine uses its high current to magnetically implode targets relevant to inertial confinement fusion. Since target performance is highly dependent on the applied drive field, measuring magnetic field at the target is essential for accurate simulations. Recently, the magnetic field at the target was measured through splitting of the sodium 3s-3p doublet at 5890 and 5896 Å. Spectroscopic dopants were applied to the exterior of the target, and spectral lines were observed in absorption. Magnetic fields in excess of 200 T were measured, corresponding to drive currents of approximately 5 MA early in the pulse.

  9. 2016 Polymer Physics Gordon Research Conference (South Hadley, MA) - JCAP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    16 Polymer Physics Gordon Research Conference (South Hadley, MA) 2016 Polymer Physics Gordon Research Conference (South Hadley, MA) Sun, Jul 24, 2016 3:00pm 15:00 Fri, Jul 29, 2016 4:00pm 16:00 South Hadley, MA USA Bryan S. Beckingham, Breanna M. Dobyns and Daniel J. Miller, "Real-time monitoring of single-and multi-component permeation via in-situ ATR FTIR spectroscopy" (poster) July 9 Gordon Research Seminar on Plasmonics and Nanophotonics (Newry, ME) July 25 21st International

  10. CENTRIFUGAL CASTING MACHINE

    DOE Patents [OSTI]

    Shuck, A.B.

    1958-04-01

    A device is described that is specifically designed to cast uraniumn fuel rods in a vacuunn, in order to obtain flawless, nonoxidized castings which subsequently require a maximum of machining or wastage of the expensive processed material. A chamber surrounded with heating elements is connected to the molds, and the entire apparatus is housed in an airtight container. A charge of uranium is placed in the chamber, heated, then is allowed to flow into the molds While being rotated. Water circulating through passages in the molds chills the casting to form a fine grained fuel rod in nearly finished form.

  11. Stirling cycle machine

    SciTech Connect (OSTI)

    Burnett, S.C.; Purcell, J.R.; Creedon, W.P.; Joshi, C.H.

    1990-06-05

    This patent describes an improvement in a Stirling cycle machine including first and second variable-volume, compression-expansion chambers containing a gas a regenerator interconnecting the chambers and for conducting the gas therebetween, and eccentric drive means for driving the first and second chambers. It comprises: the eccentric drive means comprising a pair of rotatably mounted shafts, at least one pair of eccentric disks fixed on the shafts in phase with each other, and means for causing the shafts and thereby the eccentric disks to rotate in opposite directions.

  12. Structure of Oxide Nanoparticles in Fe-16Cr MA/ODS Ferritic Steel

    SciTech Connect (OSTI)

    Hsiung, L; Fluss, M; Kimura, A

    2010-04-06

    Oxide nanoparticles in Fe-16Cr ODS ferritic steel fabricated by mechanical alloying (MA) method have been examined using high-resolution transmission electron microscopy (HRTEM) techniques. A partial crystallization of oxide nanoparticles was frequently observed in as-fabricated ODS steel. The crystal structure of crystalline oxide particles is identified to be mainly Y{sub 4}Al{sub 2}O{sub 9} (YAM) with a monoclinic structure. Large nanoparticles with a diameter larger than 20 nm tend to be incoherent and have a nearly spherical shape, whereas small nanoparticles with a diameter smaller than 10 nm tend to be coherent or semi-coherent and have faceted boundaries. The oxide nanoparticles become fully crystallized after prolonged annealing at 900 C. These results lead us to propose a three-stage formation mechanism of oxide nanoparticles in MA/ODS steels.

  13. Mysteries of 'molecular machines' revealed

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mysteries of 'molecular machines' revealed Mysteries of 'molecular machines' revealed Scientists are making it easier for pharmaceutical companies and researchers to see the detailed inner workings of molecular machines. December 22, 2014 A picture of a membrane protein called cysZ determined with Phenix software using data that could not previously be analyzed. A picture of a membrane protein called cysZ determined with Phenix software using data that could not previously be analyzed. Contact

  14. MaRIE theory, modeling and computation roadmap executive summary...

    Office of Scientific and Technical Information (OSTI)

    executive summary describe in detail for each of these areas the current state of the art, the gaps that exist and the road map to MaRIE and beyond. Here we integrate the...

  15. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2009-08-28

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document.

  16. Green Machine | Open Energy Information

    Open Energy Info (EERE)

    Information Name Green Machine Facility Geothermal Power Plant Sector Geothermal energy Location Information Coordinates 45.943161, 24.96676 Loading map......

  17. Earth boring machine and method

    SciTech Connect (OSTI)

    Sullinger, R.

    1983-09-13

    An earth boring machine and method are disclosed. An above-ground reference line, such as a laser beam, is established for a hole to be bored. The direction of the reference line is detected. The direction of a cutting head of the boring machine in a bore hole is detected and signals of the detected direction are transmitted to a control unit for comparison with the reference line direction. The boring machine is controlled with, for example, cam actuated adjustable peripheral cutters on the cutting head so that the direction of the boring machine can be adjusted to that of the reference line.

  18. Market Acceptance of Advanced Automotive Technologies (MA3T) Model

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Acceptance of Advanced Automotive Technologies (MA3T) Model (Oak Ridge National Laboratory) Objectives Forecasts sales of competing vehicle technologies among consumer segments. Analyzes how technology, infrastructure, consumer behavior, and policy affect sales of new technologies and determines the resulting societal, environmental and economic impacts. Key Attributes & Strengths MA3T can be used to investigate the societal benefits, costs, and employment impacts of market transitions

  19. A new 40 MA ranchero explosive pulsed power system

    SciTech Connect (OSTI)

    Goforth, James; Herrera, Dennis; Oona, Hank; Torres, David; Atchison, W L; Colgate, S A; Griego, J R; Guzik, J; Holtkamp, D B; Idzorek, G; Kaul, A; Kirkpatrick, R C; Menikoff, R; Reardon, P T; Reinovsky, R E; Rousculp, C L; Sgro, A G; Tabaka, L J; Tierney, T E; Watt, R G

    2009-01-01

    We are developing a new high explosive pulsed power (HEPP) system based on the 1.4 m long Ranchero generator which was developed in 1999 for driving solid density z-pinch loads. The new application requires approximately 40 MA to implode similar liners, but the liners cannot tolerate the 65 {micro}s, 3 MA current pulse associated with delivering the initial magnetic flux to the 200 nH generator. To circumvent this problem, we have designed a system with an internal start switch and four explosively formed fuse (EFF) opening switches. The integral start switch is installed between the output glide plane and the armature. It functions in the same manner as a standard input crowbar switch when armature motion begins, but initially isolates the load. The circuit is completed during the flux loading phase using post hole convolutes. Each convolute attaches the inner (coaxial) output transmission line to the outside of the outer coax through a penetration of the outer coaxial line. The attachment is made with the conductor of an EFF at each location. The EFFs conduct 0.75 MA each, and are actuated just after the internal start switch connects to the load. EFFs operating at these parameters have been tested in the past. The post hole convolutes must withstand as much as 80 kV at peak dl/dt during the Ranchero load current pulse. We describe the design of this new HEPP system in detail, and give the experimental results available at conference time. In addition, we discuss the work we are doing to test the upper current limits of a single standard size Ranchero module. Calculations have suggested that the generator could function at up to {approx}120 MA, the rule of thumb we follow (1 MA/cm) suggests 90 MA, and simple flux compression calculations, along with the {approx}4 MA seed current available from our capacitor bank, suggests 118 MA is the currently available upper limit.

  20. Process for laser machining and surface treatment

    DOE Patents [OSTI]

    Neil, George R.; Shinn, Michelle D.

    2004-10-26

    An improved method and apparatus increasing the accuracy and reducing the time required to machine materials, surface treat materials, and allow better control of defects such as particulates in pulsed laser deposition. The speed and quality of machining is improved by combining an ultrashort pulsed laser at high average power with a continuous wave laser. The ultrashort pulsed laser provides an initial ultrashort pulse, on the order of several hundred femtoseconds, to stimulate an electron avalanche in the target material. Coincident with the ultrashort pulse or shortly after it, a pulse from a continuous wave laser is applied to the target. The micromachining method and apparatus creates an initial ultrashort laser pulse to ignite the ablation followed by a longer laser pulse to sustain and enlarge on the ablation effect launched in the initial pulse. The pulse pairs are repeated at a high pulse repetition frequency and as often as desired to produce the desired micromachining effect. The micromachining method enables a lower threshold for ablation, provides more deterministic damage, minimizes the heat affected zone, minimizes cracking or melting, and reduces the time involved to create the desired machining effect.

  1. Machine-z: Rapid machine-learned redshift indicator for Swift...

    Office of Scientific and Technical Information (OSTI)

    Machine-z: Rapid machine-learned redshift indicator for Swift gamma-ray bursts This content will become publicly available on March 8, 2017 Title: Machine-z: Rapid machine-learned ...

  2. DOE - Office of Legacy Management -- C G Sargent and Sons - MA 17

    Office of Legacy Management (LM)

    C G Sargent and Sons - MA 17 FUSRAP Considered Sites Site: C. G. SARGENT & SONS (MA.17 ) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: Graniteville , Massachusetts MA.17-1 Evaluation Year: 1991 MA.17-1 MA.17-2 Site Operations: Conducted extruder and drying tests with thorium in the late 1960s. MA.17-3 Site Disposition: Eliminated - Potential for contamination considered remote based on the limited quantity of materials handled

  3. DOE - Office of Legacy Management -- Tufts College - MA 0-05

    Office of Legacy Management (LM)

    Tufts College - MA 0-05 FUSRAP Considered Sites Site: TUFTS COLLEGE ( MA.0-05 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: Medford , Massachusetts MA.0-05-1 Evaluation Year: 1987 MA.0-05-1 Site Operations: Research and development using only small quantities of radioactive material. MA.0-05-1 Site Disposition: Eliminated - Potential for contamination considered remote based on limited quantities of material handled MA.0-05-1

  4. HUMAN MACHINE COOPERATIVE TELEROBOTICS

    SciTech Connect (OSTI)

    William R. Hamel; Spivey Douglass; Sewoong Kim; Pamela Murray; Yang Shou; Sriram Sridharan; Ge Zhang; Scott Thayer; Rajiv V. Dubey

    2003-06-30

    described as Human Machine Cooperative Telerobotics (HMCTR). The HMCTR combines the telerobot with robotic control techniques to improve the system efficiency and reliability in teleoperation mode. In this topical report, the control strategy, configuration and experimental results of Human Machines Cooperative Telerobotics (HMCTR), which modifies and limits the commands of human operator to follow the predefined constraints in the teleoperation mode, is described. The current implementation is a laboratory-scale system that will be incorporated into an engineering-scale system at the Oak Ridge National Laboratory in the future.

  5. Victory Power Machine Group | Open Energy Information

    Open Energy Info (EERE)

    Machine Group Jump to: navigation, search Name: Victory Power Machine Group Place: Dongying, Shandong Province, China Zip: 257032 Product: the biggest equipment manufacture of...

  6. Soil Machine Dynamics Ltd | Open Energy Information

    Open Energy Info (EERE)

    Machine Dynamics Ltd Jump to: navigation, search Name: Soil Machine Dynamics Ltd Region: United Kingdom Sector: Marine and Hydrokinetic Website: http: This company is listed in the...

  7. Machine Status | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Support User Support Machine Status Presentations Training & Outreach User Survey Machine Status MIRA 0 CETUS 0 VESTA 0 TUKEY 0

  8. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2011-04-04

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at the U.S. Department of Energy (DOE) Hanford site. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with requirements of 10 CFR 835, the DOE Laboratory Accreditation Program, the DOE Richland Operations Office, DOE Office of River Protection, DOE Pacific Northwest Office of Science, and Hanford’s DOE contractors. The dosimetry system is operated by the Pacific Northwest National Laboratory (PNNL) Hanford External Dosimetry Program which provides dosimetry services to PNNL and all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision

  9. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2010-04-01

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at the U.S. Department of Energy (DOE) Hanford site. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with requirements of 10 CFR 835, the DOE Laboratory Accreditation Program, the DOE Richland Operations Office, DOE Office of River Protection, DOE Pacific Northwest Office of Science, and Hanford’s DOE contractors. The dosimetry system is operated by the Pacific Northwest National Laboratory (PNNL) Hanford External Dosimetry Program which provides dosimetry services to PNNL and all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision

  10. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2007-03-12

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. Rev. 0 marks the first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database. Revision numbers that are whole numbers reflect major revisions typically involving changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document. Revision Log: Rev. 0 (2/25/2005) Major revision and expansion. Rev. 0.1 (3/12/2007) Minor

  11. Slide system for machine tools

    DOE Patents [OSTI]

    Douglass, S.S.; Green, W.L.

    1980-06-12

    The present invention relates to a machine tool which permits the machining of nonaxisymmetric surfaces on a workpiece while rotating the workpiece about a central axis of rotation. The machine tool comprises a conventional two-slide system (X-Y) with one of these slides being provided with a relatively short travel high-speed auxiliary slide which carries the material-removing tool. The auxiliary slide is synchronized with the spindle speed and the position of the other two slides and provides a high-speed reciprocating motion required for the displacement of the cutting tool for generating a nonaxisymmetric surface at a selected location on the workpiece.

  12. Climate Action Champions: Boston, MA | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Boston, MA Climate Action Champions: Boston, MA Boston is the largest city in New England and one of the oldest in the United States. Home to sixty colleges and universities, world-renowned medical facilities, nationally competitive professional sports teams, and thriving music and arts scene, Boston is a cultural hub and leader in innovation. | Photo courtesy of the City of Boston. Boston is the largest city in New England and one of the oldest in the United States. Home to sixty colleges and

  13. Notice of Intent: Upcoming Funding Opportunity for Next Generation of Electric Machines Projects

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office intends to issue a new funding opportunity for work to develop Next Generation of Electric Machines (NGEM). NGEMs combine high power density, high RPM motors with integrated power electronics.

  14. Diamond turning machine controller implementation

    SciTech Connect (OSTI)

    Garrard, K.P.; Taylor, L.W.; Knight, B.F.; Fornaro, R.J.

    1988-12-01

    The standard controller for a Pnuemo ASG 2500 Diamond Turning Machine, an Allen Bradley 8200, has been replaced with a custom high-performance design. This controller consists of four major components. Axis position feedback information is provided by a Zygo Axiom 2/20 laser interferometer with 0.1 micro-inch resolution. Hardware interface logic couples the computers digital and analog I/O channels to the diamond turning machine`s analog motor controllers, the laser interferometer, and other machine status and control information. It also provides front panel switches for operator override of the computer controller and implement the emergency stop sequence. The remaining two components, the control computer hardware and software, are discussed in detail below.

  15. Performance of the accelerator driver of Jefferson Laboratory's free-electron laser

    SciTech Connect (OSTI)

    Bohn, C.L.; Benson, S.; Biallas, G.

    1999-04-01

    The driver of Jefferson Lab's kW-level infrared free-electron laser (FEL) is a superconducting, recirculating accelerator that recovers about 75% of the electron-beam power and converts it to radiofrequency power. In achieving first lasing, the accelerator operated straight-ahead to deliver 38 MeV, 1.1 mA cw current through the wiggler for lasing at wavelengths in the vicinity of 5 {mu}m. Just prior to first lasing, measured rms beam properties at the wiggler were 7.5{+-}1.5 mm-mr normalized transverse emittance, 26{+-}7 keV-deg longitudinal emittance, and 0.4{+-}0.1 ps bunch length which yielded a peak current of 60{+-}15A. The waste beam was then sent directly to a dump, bypassing the recirculation loop. Stable operation at up to 311 W cw was achieved in this mode. Commissioning the recirculation loop then proceeded. As of this Conference, the machine has recirculated cw average current up to 4 mA, and has lased cw with energy recover up to 710 W.

  16. The Milling Assistant, Case-Based Reasoning, and machining strategy: A report on the development of automated numerical control programming systems at New Mexico State University

    SciTech Connect (OSTI)

    Burd, W.; Culler, D.; Eskridge, T.; Cox, L.; Slater, T.

    1993-08-01

    The Milling Assistant (MA) programming system demonstrates the automated development of tool paths for Numerical Control (NC) machine tools. By integrating a Case-Based Reasoning decision processor with a commercial CAD/CAM software, intelligent tool path files for milled and point-to-point features can be created. The operational system is capable of reducing the time required to program a variety of parts and improving product quality by collecting and utilizing ``best of practice`` machining strategies.

  17. Identification of synchronous machine parameters

    SciTech Connect (OSTI)

    Shaban, A.O.

    1985-01-01

    The synchronous machine is an essential component of a power system and determination of its parameters accurately is an important task in securing adequate modes of operation through certain control strategies. An estimation technique based on the Powell algorithm was evaluated for the identification of these parameters on the basis of small-signal input-output data. A fifth order Park domain flux linkage model of a salient pole machine was used for the identification of the parameters. Stator terminal voltages as transformed into the Park domain, field voltage and rotor frequency were used as input signals to the model. The input signals to the actual machine are the stator terminal voltages and the field voltage. The Park domain stator terminal current and field current were used as output signals. Due to the lack of access to real data, digital simulation of an actual machine as used in an effort to establish the machine responses in the time domain to small changes in the input signals. These responses were compared with those obtained from the model with the unknown parameters and utilized in the identification process. The sensitivity of a least-square loss-function with respect to each parameter was tested. The proposed parameter identification method was evaluated with data of two different machines. Careful observation of the results indicates that convergence can only be secured if nonsimultaneous perturbation of the direct - and quadrature - axis components of the terminal voltages is applied.

  18. DOE - Office of Legacy Management -- Englehard Industries - MA 0-03

    Office of Legacy Management (LM)

    Englehard Industries - MA 0-03 FUSRAP Considered Sites Site: Englehard Industries (MA.0-03 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: D.E. Makepeace Co. D.E. Makepeace Division of Englehard Industries MA.0-03-1 Location: Plainville , Massachusetts MA.0-03-1 Evaluation Year: 1980 MA.0-03-1 Site Operations: Metal Fabrication operations - uranium metal - under AEC license. MA.0-03-1 Site Disposition: Eliminated - NRC licensed MA.0-03-1

  19. DOE - Office of Legacy Management -- Metals and Controls Corp FSM Dept - MA

    Office of Legacy Management (LM)

    21 and Controls Corp FSM Dept - MA 21 FUSRAP Considered Sites Site: METALS AND CONTROLS CORP., FSM DEPT. ( MA.21 ) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: M&C Texas Instruments MA.21-1 Location: Attleboro , Massachusetts MA.21-1 Evaluation Year: Circa 1987 MA.21-4 Site Operations: Nuclear fuel fabrication during the 1950s and 1960s. MA.21-2 Site Disposition: Eliminated - NRC licensed MA.21-2 Radioactive Materials Handled: Yes Primary

  20. biomass briquetting machine | OpenEI Community

    Open Energy Info (EERE)

    biomass briquetting machine Home There are currently no posts in this category. Syndicate content...

  1. Machine Optimized Analysis Tools

    Energy Science and Technology Software Center (OSTI)

    2011-12-11

    This software package provides a common "front end" for various math operations that are relevant to astrophysical data processing. This includes special function evaluation, fast Fourier transforms, streamed random number generation and spherical geometry projections. Computer-vendor specific libraries and internal algorithms can be selected on different systems in order to achieve the best possible performance on all systems. This software is still in an early state of development. Hardware req.: Multi-platform; Software Req.: Operating System/Version:more » Any POSIX compliant OS; Compiler/Version: Any standard C++ compiler which supports the BOOST software package; Types of files: Source code and programmer documentation; Media type information: UNIX; Document type: User manual; Electronic format; location Url: github.com/tskisner/MOAT« less

  2. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2010-01-01

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document. Maintenance and distribution of controlled hard copies of the

  3. High Availability Electronics Standards

    SciTech Connect (OSTI)

    Larsen, R.S.; /SLAC

    2006-12-13

    Availability modeling of the proposed International Linear Collider (ILC) predicts unacceptably low uptime with current electronics systems designs. High Availability (HA) analysis is being used as a guideline for all major machine systems including sources, utilities, cryogenics, magnets, power supplies, instrumentation and controls. R&D teams are seeking to achieve total machine high availability with nominal impact on system cost. The focus of this paper is the investigation of commercial standard HA architectures and packaging for Accelerator Controls and Instrumentation. Application of HA design principles to power systems and detector instrumentation are also discussed.

  4. Axial gap rotating electrical machine

    DOE Patents [OSTI]

    None

    2016-02-23

    Direct drive rotating electrical machines with axial air gaps are disclosed. In these machines, a rotor ring and stator ring define an axial air gap between them. Sets of gap-maintaining rolling supports bear between the rotor ring and the stator ring at their peripheries to maintain the axial air gap. Also disclosed are wind turbines using these generators, and structures and methods for mounting direct drive rotating electrical generators to the hubs of wind turbines. In particular, the rotor ring of the generator may be carried directly by the hub of a wind turbine to rotate relative to a shaft without being mounted directly to the shaft.

  5. Cooling system for rotating machine

    DOE Patents [OSTI]

    Gerstler, William Dwight; El-Refaie, Ayman Mohamed Fawzi; Lokhandwalla, Murtuza; Alexander, James Pellegrino; Quirion, Owen Scott; Palafox, Pepe; Shen, Xiaochun; Salasoo, Lembit

    2011-08-09

    An electrical machine comprising a rotor is presented. The electrical machine includes the rotor disposed on a rotatable shaft and defining a plurality of radial protrusions extending from the shaft up to a periphery of the rotor. The radial protrusions having cavities define a fluid path. A stationary shaft is disposed concentrically within the rotatable shaft wherein an annular space is formed between the stationary and rotatable shaft. A plurality of magnetic segments is disposed on the radial protrusions and the fluid path from within the stationary shaft into the annular space and extending through the cavities within the radial protrusions.

  6. DOE - Office of Legacy Management -- Reed Rolled Thread Co - MA 18

    Office of Legacy Management (LM)

    Reed Rolled Thread Co - MA 18 FUSRAP Considered Sites Site: REED ROLLED THREAD CO. (MA.18 ) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: Reed Rolled Thread and Die Co MA.18-1 Location: Worcester , Massachusetts MA.18-3 Evaluation Year: 1990 MA.18-2 MA.18-3 Site Operations: Thread rolling of a test lot of 1500 SRO slugs were planned for this site on September 14 and 15, 1955. There is no indication that the operation was actually conducted at this

  7. Mobile machine hazardous working zone warning system

    DOE Patents [OSTI]

    Schiffbauer, William H.; Ganoe, Carl W.

    1999-01-01

    A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation thereof. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine.

  8. Mobile machine hazardous working zone warning system

    DOE Patents [OSTI]

    Schiffbauer, W.H.; Ganoe, C.W.

    1999-08-17

    A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine. 3 figs.

  9. Designing a parallel simula machine

    SciTech Connect (OSTI)

    Papazoglou, M.P.; Georgiadis, P.I.; Maritsas, D.G.

    1983-10-01

    The parallel simula machine (PSM) architecture is based upon a master/slave topology, incorporating a master microprocessor. Interconnection circuitry between the master and slave processor modules uses a timesharing system bus and various programmable interrupt control units. Common and private memory modules reside in the PSM, and direct memory access transfers ease the master processor's workload. 5 references.

  10. EV Everywhere Grand Challenge - Electric Drive (Power Electronics and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electric Machines) Workshop | Department of Energy - Electric Drive (Power Electronics and Electric Machines) Workshop EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop List of companies in attendance at the Electric Drive Workshop held on July 24, 2012 at the Doubletree O'Hare, Chicago, IL companies_in_attendance_ed.pdf (145.65 KB) More Documents & Publications EV Everywhere Grand Challenge Introduction for Electric Drive Workshop EV

  11. Ion-induced swelling of ODS ferritic alloy MA957 tubing to 500 dpa

    SciTech Connect (OSTI)

    Toloczko, Mychailo B.; Garner, F. A.; Voyevodin, V.; Bryk, V. V.; Borodin, O. V.; Melnichenko, V. V.; Kalchenko, A. S.

    2014-10-01

    In order to study the potential swelling behavior of the ODS ferritic alloy MA957 at very high dpa levels, specimens were prepared from pressurized tubes that were unirradiated archives of tubes previously irradiated in FFTF to doses as high at 110 dpa. These unirradiated specimens were irradiated with 1.8 MeV Cr+ ions to doses ranging from 100 to 500 dpa and examined by transmission electron microscopy. No coinjection of helium or hydrogen was employed. It was shown that compared to several ferritic/martensitic steels irradiated in the same facility, these tubes were rather resistant to void swelling, reaching a maximum value of only 4.5% at 500 dpa and 450°C. In this fine-grained material, the distribution of swelling was strongly influenced by the presence of void denuded zones along the grain boundaries.

  12. MaRIE 1.0: The Matter-Radiation Interactions in Extremes Project...

    Office of Scientific and Technical Information (OSTI)

    MaRIE 1.0: The Matter-Radiation Interactions in Extremes Project, and the Challenge of Dynamic Mesoscale Imaging Citation Details In-Document Search Title: MaRIE 1.0: The Matter-Ra...

  13. MaRIE: A facility for time-dependent materials science at the...

    Office of Scientific and Technical Information (OSTI)

    MaRIE: A facility for time-dependent materials science at the mesoscale Citation Details In-Document Search Title: MaRIE: A facility for time-dependent materials science at the ...

  14. MaRIE: Probing Dynamic Processes in Soft Materials Using Advanced...

    Office of Scientific and Technical Information (OSTI)

    Los Alamos National Laboratory has developed a concept for a new research facility, MaRIE: Matter-Radiation Interactions in Extremes. The key motivation for MaRIE is to develop new ...

  15. Roadmap to MaRIE January 2015 (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Roadmap to MaRIE January 2015 Citation Details In-Document Search Title: Roadmap to MaRIE January 2015 You are accessing a document from the Department of Energy's (DOE) SciTech ...

  16. Roadmap to MaRIE August 2015 (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Roadmap to MaRIE August 2015 Citation Details In-Document Search Title: Roadmap to MaRIE August 2015 You are accessing a document from the Department of Energy's (DOE) SciTech ...

  17. Roadmap to MaRIE (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Roadmap to MaRIE Citation Details In-Document Search Title: Roadmap to MaRIE You are accessing a document from the Department of Energy's (DOE) SciTech ...

  18. Roadmap to MaRIE March 2015 (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Roadmap to MaRIE March 2015 Citation Details In-Document Search Title: Roadmap to MaRIE March 2015 You are accessing a document from the Department of Energy's ...

  19. MaRIE 1.0 -- The Matter-Radiation Interactions in Extremes Project...

    Office of Scientific and Technical Information (OSTI)

    MaRIE 1.0 -- The Matter-Radiation Interactions in Extremes Project: Accelerating Qualification, Certification, and Assessment Citation Details In-Document Search Title: MaRIE 1.0 ...

  20. Roadmap to MaRIE (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: Roadmap to MaRIE Authors: Barnes, Cris William ... Elementary Particles & Fields(72) LANL, Roadmap to MaRIE, Matter-Radiation Interactions ...

  1. Roadmap to MaRIE August 2015 (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: Roadmap to MaRIE August 2015 Authors: Barnes, ... Elementary Particles & Fields(72) LANL, Roadmap to MaRIE, Matter-Radiation Interactions ...

  2. Roadmap to MaRIE May 2015 (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: Roadmap to MaRIE May 2015 Los Alamos National ... PHYSICS AND RADIATION PHYSICS LANL, Roadmap to MaRIE, Matter-Radiation Interactions ...

  3. Roadmap to MaRIE January 2015 (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: Roadmap to MaRIE January 2015 Authors: Barnes, ... Elementary Particles & Fields(72) LANL, Roadmap to MaRIE, Matter-Radiation Interactions ...

  4. Roadmap to MaRIE March 2015 (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: Roadmap to MaRIE March 2015 Authors: Barnes, ... Elementary Particles & Fields(72) LANL, Roadmap to MaRIE, Matter-Radiation Interactions ...

  5. Roadmap to MaRIE November 2015 (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: Roadmap to MaRIE November 2015 This report ... PHYSICS AND RADIATION PHYSICS LANL; Roadmap to MaRIE; Matter-Radiation Interactions ...

  6. Integrated Inverter For Driving Multiple Electric Machines

    DOE Patents [OSTI]

    Su, Gui-Jia [Knoxville, TN; Hsu, John S [Oak Ridge, TN

    2006-04-04

    An electric machine drive (50) has a plurality of inverters (50a, 50b) for controlling respective electric machines (57, 62), which may include a three-phase main traction machine (57) and two-phase accessory machines (62) in a hybrid or electric vehicle. The drive (50) has a common control section (53, 54) for controlling the plurality of inverters (50a, 50b) with only one microelectronic processor (54) for controlling the plurality of inverters (50a, 50b), only one gate driver circuit (53) for controlling conduction of semiconductor switches (S1-S10) in the plurality of inverters (50a, 50b), and also includes a common dc bus (70), a common dc bus filtering capacitor (C1) and a common dc bus voltage sensor (67). The electric machines (57, 62) may be synchronous machines, induction machines, or PM machines and may be operated in a motoring mode or a generating mode.

  7. Aqueous cutting fluid for machining fissionable materials

    DOE Patents [OSTI]

    Duerksen, Walter K.; Googin, John M.; Napier, Jr., Bradley

    1984-01-01

    The present invention is directed to a cutting fluid for machining fissionable material. The cutting fluid is formed of glycol, water and boron compound in an adequate concentration for effective neutron attenuation so as to inhibit criticality incidents during machining.

  8. Specimen coordinate automated measuring machine/fiducial automated measuring machine

    DOE Patents [OSTI]

    Hedglen, Robert E.; Jacket, Howard S.; Schwartz, Allan I.

    1991-01-01

    The Specimen coordinate Automated Measuring Machine (SCAMM) and the Fiducial Automated Measuring Machine (FAMM) is a computer controlled metrology system capable of measuring length, width, and thickness, and of locating fiducial marks. SCAMM and FAMM have many similarities in their designs, and they can be converted from one to the other without taking them out of the hot cell. Both have means for: supporting a plurality of samples and a standard; controlling the movement of the samples in the +/- X and Y directions; determining the coordinates of the sample; compensating for temperature effects; and verifying the accuracy of the measurements and repeating as necessary. SCAMM and FAMM are designed to be used in hot cells.

  9. MaRIE 1.0: The Matter-Radiation Interactions in Extremes Project, and the Challenge of Dynamic Mesoscale Imaging

    SciTech Connect (OSTI)

    Barnes, Cris William; Barber, John L.; Kober, Edward Martin; Lookman, Turab; Sandberg, Richard L.; Shlachter, Jack S.; Sheffield, Richard L.

    2015-02-23

    The Matter-Radiation Interactions in Extremes project will build the experimental facility for the time-dependent control of dynamic material performance. An x-ray free electron laser at up to 42-keV fundamental energy and with photon pulses down to sub-nanosecond spacing, MaRIE 1.0 is designed to meet the challenges of time-dependent mesoscale materials science. Those challenges will be outlined, the techniques of coherent diffractive imaging and dynamic polycrystalline diffraction described, and the resulting requirements defined for a coherent x-ray source. The talk concludes with the role of the MaRIE project and science in the future.

  10. TO: FILE FRml: J&-q Ma

    Office of Legacy Management (LM)

    nEnaRAt4Dun TO: FILE FRml: J&-q Ma __--------- SUBJECT:' g I**;&4 AfI~s-dd-rs , /y/u,,r(,, ALTERNATE AIA& ___-_-__--_____-____------------------- NAnE:--------_________--__ CITY: M.'Iw.r\CcrQ STATE: -em-- -- wes) fiv;s ____ --------- ti 1 w!!!!2%2. Past: _______----__------~~~~~ Current:____-_-___------- Owner cnntacted Pf yes Q no; if yes, date contacted--- /1,7-w~~~I ,I TYPE OF OPERATION (4MJ J?i- 5796 zb7~:r~ __-- ____ -----_--- q Research & Development cl Faci 1 i ty Type 0

  11. Intense x-ray machine for penetrating radiography

    SciTech Connect (OSTI)

    Lucht, R.A.; Eckhouse, S.

    1989-01-01

    Penetrating radiography has been used for many years in the nuclear weapons research programs. In frequently penetrating radiography has been used in conventional weapons research programs. For example the Los Alamos PHERMEX machine was used to view uranium rods penetrating steel for the GAU-8 program, and the Ector machine was used to see low-density regions in forming metal jets. The armor/anti-armor program at Los Alamos has created a need for an intense flash x-ray machine that can be dedicated to conventional weapons research. The Balanced Technology Initiative, through DARPA, has funded the design and construction of such a machine at Los Alamos. It will be an 8- to 10-MeV diode machine capable of delivering a dose of 500 R at 1 m with a spot size of less than 5 mm. The machine used an 87.5-stage low-inductance Marx generator that charges up a 7.4-/Omega/, 32-ns water line. The water line is discharged through a self-breakdown oil switch into a 12.4-/Omega/ water line that rings up the voltage into the high-impendance x-ray diode. A long (233-cm) vacuum drift tube is used to separate the large-diameter oil-insulated diode region from the x-ray source area that may be exposed to high overpressures by the explosive experiments. The electron beam is self-focused at the target area using a low-pressure background gas. 15 refs., 11 figs.

  12. Evaluation Of Electrochemical Machining Technology For Surface...

    Office of Scientific and Technical Information (OSTI)

    Evaluation Of Electrochemical Machining Technology For Surface Improvements In Additive Manufactured Components ... ORNL Manufacturing Demonstration Facility worked with ECM ...

  13. Permutation parity machines for neural cryptography

    SciTech Connect (OSTI)

    Reyes, Oscar Mauricio; Zimmermann, Karl-Heinz

    2010-06-15

    Recently, synchronization was proved for permutation parity machines, multilayer feed-forward neural networks proposed as a binary variant of the tree parity machines. This ability was already used in the case of tree parity machines to introduce a key-exchange protocol. In this paper, a protocol based on permutation parity machines is proposed and its performance against common attacks (simple, geometric, majority and genetic) is studied.

  14. Audit Report: CR-MA-95-02 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    MA-95-02 Audit Report: CR-MA-95-02 February 10, 1995 Management Advisory Report on Universities Research Association's Documentation and Technical Closeout Activities Audit Report: CR-MA-95-02 (535.76 KB) More Documents & Publications Audit Report: IG-0389 Audit Report: IG-0407 Audit Report: IG-0520

  15. Debugging Fortran on a shared memory machine

    SciTech Connect (OSTI)

    Allen, T.R.; Padua, D.A.

    1987-01-01

    Debugging on a parallel processor is more difficult than debugging on a serial machine because errors in a parallel program may introduce nondeterminism. The approach to parallel debugging presented here attempts to reduce the problem of debugging on a parallel machine to that of debugging on a serial machine by automatically detecting nondeterminism. 20 refs., 6 figs.

  16. Method and apparatus for monitoring machine performance

    DOE Patents [OSTI]

    Smith, Stephen F.; Castleberry, Kimberly N.

    1996-01-01

    Machine operating conditions can be monitored by analyzing, in either the time or frequency domain, the spectral components of the motor current. Changes in the electric background noise, induced by mechanical variations in the machine, are correlated to changes in the operating parameters of the machine.

  17. Science and Technology of the 10-MA Spherical Tori

    SciTech Connect (OSTI)

    Peng, Y-K.M.

    1999-11-14

    The Spherical Torus (ST) configuration has recently emerged as an example of confinement concept innovation that enables attractive steps in the development of fusion energy. The scientific potential for the ST has been indicated by recent encouraging results from START,2 CDX-U, and HIT. The scientific principles for the D-fueled ST will soon be tested by NSTX (National Spherical Torus Experiment3) in the U.S. and MAST (Mega-Amp Spherical Tokamak4) in the U.K. at the level of l-2 MA in plasma current. More recently, interest has grown in the U.S. in the possibility of near-term ST fusion burn devices at the level of 10 MA in plasma current. The missions for these devices would be to test burning plasma performance in a small, pulsed D-T-fueled ST (i.e., DTST) and to develop fusion energy technologies in a small steady state ST-based Volume Neutron Source (VNS). This paper reports the results of analysis of the key science and technology issues for these devices.

  18. Electron-limiting defect complex in hyperdoped GaAs: The D D...

    Office of Scientific and Technical Information (OSTI)

    Electron-limiting defect complex in hyperdoped GaAs: The D D X center Prev Next Title: Electron-limiting defect complex in hyperdoped GaAs: The D D X center Authors: Ma, Jie ...

  19. DOE - Office of Legacy Management -- E B Badger - MA 0-01

    Office of Legacy Management (LM)

    B Badger - MA 0-01 FUSRAP Considered Sites Site: E.B. Badger (MA.0-01 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: 75 Pitts Street , Boston , Massachusetts MA.0-01-1 Evaluation Year: 1987 MA.0-01-2 Site Operations: Construction contractor during the mid-1940s; constructed facility to refine pitchblende ore and produce feed materials at another location. MA.0-01-2 Site Disposition: Eliminated - No indication of radioactive

  20. Air Cooling Technology for Advanced Power Electronics and Electric Machines

    Broader source: Energy.gov [DOE]

    2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C.

  1. Power Electronics and Electric Machines Merit Review, May 2005

    Broader source: Energy.gov [DOE]

    A report that lists Attendees, Webcast Attendance Report, Summary of Reviewer's Ratings Grouped by Research Areas and Reviewer Comments

  2. Everett, MA Liquefied Natural Gas Total Imports (Million Cubic Feet)

    U.S. Energy Information Administration (EIA) Indexed Site

    Total Imports (Million Cubic Feet) Everett, MA Liquefied Natural Gas Total Imports (Million Cubic Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2013 2,583 2,728 2014 5,470 3,783 2,334 2,806 2,175 3,311 1,567 2,871 2,505 2,003 2015 7,729 7,623 5,521 1,673 2,557 7,133 8,237 2,563 2,653 1,541 2,452 2016 10,633 8,593 5,626 4,693 5,087 7,520 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Release Date: 08/31/2016

  3. Larger sized wire arrays on 1.5 MA Z-pinch generator

    SciTech Connect (OSTI)

    Safronova, A. S. Kantsyrev, V. L. Weller, M. E. Shlyaptseva, V. V. Shrestha, I. K. Esaulov, A. A. Stafford, A.; Chuvatin, A. S.; Coverdale, C. A.; Jones, B.

    2014-12-15

    Experiments on the UNR Zebra generator with Load Current Multiplier (LCM) allow for implosions of larger sized wire array loads than at standard current of 1 MA. Advantages of larger sized planar wire array implosions include enhanced energy coupling to plasmas, better diagnostic access to observable plasma regions, and more complex geometries of the wire loads. The experiments with larger sized wire arrays were performed on 1.5 MA Zebra with LCM (the anode-cathode gap was 1 cm, which is half the gap used in the standard mode). In particular, larger sized multi-planar wire arrays had two outer wire planes from mid-atomic-number wires to create a global magnetic field (gmf) and plasma flow between them. A modified central plane with a few Al wires at the edges was put in the middle between outer planes to influence gmf and to create Al plasma flow in the perpendicular direction (to the outer arrays plasma flow). Such modified plane has different number of empty slots: it was increased from 6 up to 10, hence increasing the gap inside the middle plane from 4.9 to 7.7 mm, respectively. Such load configuration allows for more independent study of the flows of L-shell mid-atomic-number plasma (between the outer planes) and K-shell Al plasma (which first fills the gap between the edge wires along the middle plane) and their radiation in space and time. We demonstrate that such configuration produces higher linear radiation yield and electron temperatures as well as advantages of better diagnostics access to observable plasma regions and how the load geometry (size of the gap in the middle plane) influences K-shell Al radiation. In particular, K-shell Al radiation was delayed compared to L-shell mid-atomic-number radiation when the gap in the middle plane was large enough (when the number of empty slots was increased up to ten)

  4. Chip breaking system for automated machine tool

    DOE Patents [OSTI]

    Arehart, Theodore A.; Carey, Donald O.

    1987-01-01

    The invention is a rotary selectively directional valve assembly for use in an automated turret lathe for directing a stream of high pressure liquid machining coolant to the interface of a machine tool and workpiece for breaking up ribbon-shaped chips during the formation thereof so as to inhibit scratching or other marring of the machined surfaces by these ribbon-shaped chips. The valve assembly is provided by a manifold arrangement having a plurality of circumferentially spaced apart ports each coupled to a machine tool. The manifold is rotatable with the turret when the turret is positioned for alignment of a machine tool in a machining relationship with the workpiece. The manifold is connected to a non-rotational header having a single passageway therethrough which conveys the high pressure coolant to only the port in the manifold which is in registry with the tool disposed in a working relationship with the workpiece. To position the machine tools the turret is rotated and one of the tools is placed in a material-removing relationship of the workpiece. The passageway in the header and one of the ports in the manifold arrangement are then automatically aligned to supply the machining coolant to the machine tool workpiece interface for breaking up of the chips as well as cooling the tool and workpiece during the machining operation.

  5. Measured Radiation and Background Levels During Transmission of Megawatt Electron Beams Through Millimeter Apertures

    SciTech Connect (OSTI)

    Alarcon, Ricardo [Arizona State University, Glendale, AZ (United States); Balascuta, S. [Arizona State University, Glendale, AZ (United States); Benson, Stephen V. [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Bertozzi, William [Massachusetts Institute of Technology, Cambridge, MA (United States); Boyce, James R. [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Cowan, Ray [Massachusetts Institute of Technology, Cambridge, MA (United States); Douglas, David R. [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Evtushenko, Pavel [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Fisher, P. [Massachusetts Institute of Technology, Cambridge, MA (United States); Ihloff, Ernest E. [Hampton University, Hampton, VA (United States); Kalantarians, Narbe [Hampton University, Hampton, VA (United States); Kelleher, Aidan Michael [Massachusetts Institute of Technology, Cambridge, MA (United States); Krossler, W. J. [William and Mary College, Williamsburg, VA (United States); Legg, Robert A. [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Long, Elena [University of New Hampshire, Durham, NH (United States); Milner, Richard [Massachusetts Institute of Technology, Cambridge, MA (United States); Neil, George R. [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Ou, Longwu [Massachusetts Institute of Technology, Cambridge, MA (United States); Schmookler, Barack Abraham [Massachusetts Institute of Technology, Cambridge, MA (United States); Tennant, Christopher D. [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Tschalar, C. [Massachusetts Institute of Technology, Cambridge, MA (United States); Williams, Gwyn P. [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Zhang, Shukui [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States)

    2013-11-01

    We report measurements of photon and neutron radiation levels observed while transmitting a 0.43 MW electron beam through millimeter-sized apertures and during beam-off, but accelerating gradient RF-on, operation. These measurements were conducted at the Free-Electron Laser (FEL) facility of the Jefferson National Accelerator Laboratory (JLab) using a 100 MeV electron beam from an energy-recovery linear accelerator. The beam was directed successively through 6 mm, 4 mm, and 2 mm diameter apertures of length 127 mm in aluminum at a maximum current of 4.3 mA (430 kW beam power). This study was conducted to characterize radiation levels for experiments that need to operate in this environment, such as the proposed DarkLight Experiment. We find that sustained transmission of a 430 kW continuous-wave (CW) beam through a 2 mm aperture is feasible with manageable beam-related backgrounds. We also find that during beam-off, RF-on operation, multipactoring inside the niobium cavities of the accelerator cryomodules is the primary source of ambient radiation when the machine is tuned for 130 MeV operation.

  6. Setup reduction approaches for machining

    SciTech Connect (OSTI)

    Gillespie, L.K.

    1997-04-01

    Rapid setup is a common improvement approach in press working operations such as blanking and shearing. It has paid major dividends in the sheet metal industry. It also has been a major improvement thrust for high-production machining operations. However, the literature does not well cover all the setup operations and constraints for job shop work. This review provides some insight into the issues involved. It highlights the floor problems and provides insights for further improvement. The report is designed to provide a quick understanding of the issues.

  7. Free-piston cutting machine

    DOE Patents [OSTI]

    Ciccarelli, Gaby; Subudhi, Manomohan; Hall, Robert E.

    2000-01-01

    A cutting machine includes a gun barrel for receiving a projectile. A compression tube is disposed in flow communication with the barrel and includes a piston therein. A reservoir is disposed in flow communication with the tube and receives a first gas under pressure. A second gas fills the compression tube on a front face of the piston. And, the pressurized first gas is discharged into the tube on a back face of the piston to accelerate the piston through the tube for compressing the second gas, and in turn launching the projectile through the barrel to impact a workpiece.

  8. Hypervelocity cutting machine and method

    DOE Patents [OSTI]

    Powell, James R.; Reich, Morris

    1996-11-12

    A method and machine 14 are provided for cutting a workpiece 12 such as concrete. A gun barrel 16 is provided for repetitively loading projectiles 22 therein and is supplied with a pressurized propellant from a storage tank 28. A thermal storage tank 32,32A is disposed between the propellant storage tank 28 and the gun barrel 16 for repetitively receiving and heating propellant charges which are released in the gun barrel 16 for repetitively firing projectiles 22 therefrom toward the workpiece 12. In a preferred embodiment, hypervelocity of the projectiles 22 is obtained for cutting the concrete workpiece 12 by fracturing thereof.

  9. Hypervelocity cutting machine and method

    DOE Patents [OSTI]

    Powell, J.R.; Reich, M.

    1996-11-12

    A method and machine are provided for cutting a workpiece such as concrete. A gun barrel is provided for repetitively loading projectiles therein and is supplied with a pressurized propellant from a storage tank. A thermal storage tank is disposed between the propellant storage tank and the gun barrel for repetitively receiving and heating propellant charges which are released in the gun barrel for repetitively firing projectiles therefrom toward the workpiece. In a preferred embodiment, hypervelocity of the projectiles is obtained for cutting the concrete workpiece by fracturing thereof. 10 figs.

  10. ASC_machines_cielo_2

    National Nuclear Security Administration (NNSA)

    96 2000 2004 2008 2012 10 12 10 15 (petaFLOPS) ASC #1 Top500 winners ASC supercomputers ASC future supercomputers Leading High-Performance Computing ASCI Red * First sustained teraFLOPS machine * 1 teraFLOPS * #1 TOP500 6/97-11/00 * Intel ASCI White * First routinely shared tri-lab resource * 12 teraFLOPS * #1 TOP500 11/00-6/02 * IBM ASCI Blue Mountain * 3 teraFLOPS * SGI ASC Purple * 100 teraFLOPS * IBM * 3 teraFLOPS * IBM ASC Red Storm * 40 teraFLOPS * Cray ASCI Q * 20 teraFLOPS * Compaq

  11. Micro-machined calorimetric biosensors

    DOE Patents [OSTI]

    Doktycz, Mitchel J.; Britton, Jr., Charles L.; Smith, Stephen F.; Oden, Patrick I.; Bryan, William L.; Moore, James A.; Thundat, Thomas G.; Warmack, Robert J.

    2002-01-01

    A method and apparatus are provided for detecting and monitoring micro-volumetric enthalpic changes caused by molecular reactions. Micro-machining techniques are used to create very small thermally isolated masses incorporating temperature-sensitive circuitry. The thermally isolated masses are provided with a molecular layer or coating, and the temperature-sensitive circuitry provides an indication when the molecules of the coating are involved in an enthalpic reaction. The thermally isolated masses may be provided singly or in arrays and, in the latter case, the molecular coatings may differ to provide qualitative and/or quantitative assays of a substance.

  12. Micro-machined resonator oscillator

    DOE Patents [OSTI]

    Koehler, Dale R.; Sniegowski, Jeffry J.; Bivens, Hugh M.; Wessendorf, Kurt O.

    1994-01-01

    A micro-miniature resonator-oscillator is disclosed. Due to the miniaturization of the resonator-oscillator, oscillation frequencies of one MHz and higher are utilized. A thickness-mode quartz resonator housed in a micro-machined silicon package and operated as a "telemetered sensor beacon" that is, a digital, self-powered, remote, parameter measuring-transmitter in the FM-band. The resonator design uses trapped energy principles and temperature dependence methodology through crystal orientation control, with operation in the 20-100 MHz range. High volume batch-processing manufacturing is utilized, with package and resonator assembly at the wafer level. Unique design features include squeeze-film damping for robust vibration and shock performance, capacitive coupling through micro-machined diaphragms allowing resonator excitation at the package exterior, circuit integration and extremely small (0.1 in. square) dimensioning. A family of micro-miniature sensor beacons is also disclosed with widespread applications as bio-medical sensors, vehicle status monitors and high-volume animal identification and health sensors. The sensor family allows measurement of temperatures, chemicals, acceleration and pressure. A microphone and clock realization is also available.

  13. Micro-machined resonator oscillator

    DOE Patents [OSTI]

    Koehler, D.R.; Sniegowski, J.J.; Bivens, H.M.; Wessendorf, K.O.

    1994-08-16

    A micro-miniature resonator-oscillator is disclosed. Due to the miniaturization of the resonator-oscillator, oscillation frequencies of one MHz and higher are utilized. A thickness-mode quartz resonator housed in a micro-machined silicon package and operated as a telemetered sensor beacon'' that is, a digital, self-powered, remote, parameter measuring-transmitter in the FM-band. The resonator design uses trapped energy principles and temperature dependence methodology through crystal orientation control, with operation in the 20--100 MHz range. High volume batch-processing manufacturing is utilized, with package and resonator assembly at the wafer level. Unique design features include squeeze-film damping for robust vibration and shock performance, capacitive coupling through micro-machined diaphragms allowing resonator excitation at the package exterior, circuit integration and extremely small (0.1 in. square) dimensioning. A family of micro-miniature sensor beacons is also disclosed with widespread applications as bio-medical sensors, vehicle status monitors and high-volume animal identification and health sensors. The sensor family allows measurement of temperatures, chemicals, acceleration and pressure. A microphone and clock realization is also available. 21 figs.

  14. Nanostructured Materials by Machining | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Materials by Machining Nanostructured Materials by Machining Presentation given at the 2007 Diesel Engine-Efficiency & Emissions Research Conference (DEER 2007). 13-16 August, 2007, Detroit, Michigan. Sponsored by the U.S. Department of Energy's (DOE) Office of FreedomCAR and Vehicle Technologies (OFCVT). deer07_trumble.pdf (3.31 MB) More Documents & Publications Ultra-Fine Grain Foils and Sheets by Large-Strain Extrusion Machining 2011 Annual Progress Report for Lightweighting Materials

  15. Electronic Fabrication & Repair | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Electronic Fabrication & Repair The Electronics group provides custom design and fabrication of electronic equipment.. We convert ideas into custom-finished equipment in our shop using ORCAD Schematic Capture and PCB Layout software in conjunction with our PCB machine to make prototype circuit boards in-house. Our technicians also aid in automating and controlling research project instrumentation using Texas Instruments LabView. We repair all kinds of scientific and laboratory electronic and

  16. Akrong Machine Services | Open Energy Information

    Open Energy Info (EERE)

    Address: 17 w. Rosewood Ave Place: Akron, Ohio Zip: 44301 Sector: Carbon Product: Manufacturing Phone Number: 330-724-1802 Website: akronmachining.com References: Akron Machine...

  17. High pressure water jet mining machine

    DOE Patents [OSTI]

    Barker, Clark R.

    1981-05-05

    A high pressure water jet mining machine for the longwall mining of coal is described. The machine is generally in the shape of a plowshare and is advanced in the direction in which the coal is cut. The machine has mounted thereon a plurality of nozzle modules each containing a high pressure water jet nozzle disposed to oscillate in a particular plane. The nozzle modules are oriented to cut in vertical and horizontal planes on the leading edge of the machine and the coal so cut is cleaved off by the wedge-shaped body.

  18. FormCampusMachineShopsLabs.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Highway Baton Rouge, Louisiana 70806 225-578-8887 225-578-6954 (Fax) Form for Campus Machine Shops and Labs Purchaser's Name Phone ...

  19. Evaluation Of Electrochemical Machining Technology For Surface...

    Office of Scientific and Technical Information (OSTI)

    Components Citation Details In-Document Search Title: Evaluation Of Electrochemical Machining Technology For Surface Improvements In Additive Manufactured Components ORNL ...

  20. Development of a Hydronic Rooftop Unit-HyPak-MA

    SciTech Connect (OSTI)

    Eric Lee; Mark Berman

    2009-11-14

    The majority of U.S. commercial floor space is cooled by rooftop HVAC units (RTUs). RTU popularity derives chiefly from their low initial cost and relative ease of service access without disturbing building occupants. Unfortunately, current RTUs are inherently inefficient due to a combination of characteristics that unnecessarily increase cooling loads and energy use. 36% percent of annual U.S. energy, and two-thirds of electricity, is consumed in and by buildings. Commercial buildings consume approximately 4.2 quads of energy each year at a cost of $230 billion per year, with HVAC equipment consuming 1.2 quads of electricity. More than half of all U.S. commercial floor space is cooled by packaged HVAC units, most of which are rooftop units (RTUs). Inefficient RTUs create an estimated 3.5% of U.S. CO{sub 2} emissions, thus contributing significantly to global warming5. Also, RTUs often fail to maintain adequate ventilation air and air filtration, reducing indoor air quality. This is the second HyPak project to be supported by DOE through NETL. The prior project, referred to as HyPak-1 in this report, had two rounds of prototype fabrication and testing as well as computer modeling and market research. The HyPak-1 prototypes demonstrated the high performance capabilities of the HyPak concept, but made it clear that further development was required to reduce heat exchanger cost and improve system reliability before HyPak commercialization can commence. The HyPak-1 prototypes were limited to about 25% ventilation air fraction, limiting performance and marketability. The current project is intended to develop a 'mixed-air' product that is capable of full 0-100% modulation in ventilation air fraction, hence it was referred to as HyPak-MA in the proposal. (For simplicity, the -MA has been dropped when referencing the current project.) The objective of the HyPak Project is to design, develop and test a hydronic RTU that provides a quantum improvement over conventional RTU

  1. NUFACT02 MACHINE WORKING GROUP SUMMARY.

    SciTech Connect (OSTI)

    AUTIN,B.FERNOW,R.C.MACHIDA,S.HARRIS,D.A.

    2002-07-01

    At {nu}Fact'02, the muon-based neutrino factory was confronted with existing and planned neutrino facilities. When it was first discussed in 1999 in Lyon [1], it raised great enthusiasm, especially because it was thought to be the only machine capable of measuring CP violation in the leptonic sector. Since that time the pendulum has partially swung back. Two successive detailed studies [2, 3] have shown that a neutrino Factory and the needed R&D were both expensive. In terms of present experiments, neutrino oscillations have been confirmed at SuperK and SNO and results are soon expected from KamLAND. K2K, MniBOONE, MINOS and CNGS are going ahead and new perspectives have been opened by off-axis pion-based neutrino beams and the approval of the high intensity Japanese Hadron Facility. Crests and troughs of a wave are common in long term projects. They are even healthy because they force us to scrutinize the first ideas and sometimes to invent new ones to reach a realistic and affordable design. This analysis has been applied to target systems (section 2), RF capture and cooling of the muons (section 4) and accelerators (section 5). The new concept of pure electron neutrino or anti-neutrino beams produced by, {beta}-decay is discussed in section 3.

  2. Welding Behavior of Free Machining Stainless Steel

    SciTech Connect (OSTI)

    BROOKS,JOHN A.; ROBINO,CHARLES V.; HEADLEY,THOMAS J.; MICHAEL,JOSEPH R.

    2000-07-24

    The weld solidification and cracking behavior of sulfur bearing free machining austenitic stainless steel was investigated for both gas-tungsten arc (GTA) and pulsed laser beam weld processes. The GTA weld solidification was consistent with those predicted with existing solidification diagrams and the cracking response was controlled primarily by solidification mode. The solidification behavior of the pulsed laser welds was complex, and often contained regions of primary ferrite and primary austenite solidification, although in all cases the welds were found to be completely austenite at room temperature. Electron backscattered diffraction (EBSD) pattern analysis indicated that the nature of the base metal at the time of solidification plays a primary role in initial solidification. The solid state transformation of austenite to ferrite at the fusion zone boundary, and ferrite to austenite on cooling may both be massive in nature. A range of alloy compositions that exhibited good resistance to solidification cracking and was compatible with both welding processes was identified. The compositional range is bounded by laser weldability at lower Cr{sub eq}/Ni{sub eq} ratios and by the GTA weldability at higher ratios. It was found with both processes that the limiting ratios were somewhat dependent upon sulfur content.

  3. Business System Clause - Berta Schreiber, Dir, Office of Policy (MA-61) |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Business System Clause - Berta Schreiber, Dir, Office of Policy (MA-61) Business System Clause - Berta Schreiber, Dir, Office of Policy (MA-61) 2014 DOE Project Management Workshop Business System Clause - Berta Schreiber, Dir, Office of Policy (MA-61) (491.41 KB) More Documents & Publications Agenda Agenda_2015 APM Workshop_Final Acquisition Letter No. AL 2013-11

  4. EDeMa (Smart Grid Project) (Krefeld, Germany) | Open Energy Informatio...

    Open Energy Info (EERE)

    (Krefeld, Germany) Jump to: navigation, search Project Name EDeMa Country Germany Headquarters Location Krefeld, Germany Coordinates 50.652943, 6.339111 Loading map......

  5. MaRIE: Probing Dynamic Processes in Soft Materials Using Advanced...

    Office of Scientific and Technical Information (OSTI)

    Title: MaRIE: Probing Dynamic Processes in Soft Materials Using Advanced Light Sources Los ... Authors: Sykora, Milan 1 ; Kober, Edward Martin 1 + Show Author Affiliations Los ...

  6. 2.8-Ma Ash-Flow Caldera At Chegem River In The Northern Caucasus...

    Open Energy Info (EERE)

    .8-Ma Ash-Flow Caldera At Chegem River In The Northern Caucasus Mountains (Russia), Contemporaneous Granites, And Associated Ore Deposits Jump to: navigation, search OpenEI...

  7. MaRIE: A facility for time-dependent materials science at the...

    Office of Scientific and Technical Information (OSTI)

    Language: English Subject: Materials Science(36); Nuclear Physics & Radiation Physics(73); Particle Accelerators(43); Physics of Elementary Particles & Fields(72) LANL, MaRIE Word ...

  8. Model for Analysis of Energy Demand (MAED-2) | Open Energy Information

    Open Energy Info (EERE)

    demand based on medium- to long-term scenarios of socio-economic, technological and demographic developments. " References "MAED 2" Retrieved from "http:en.openei.orgw...

  9. A rational minor actinide (MA) recycling concept based on innovative oxide fuel with high AM content

    SciTech Connect (OSTI)

    Tanaka, Kenya; Sato, Isamu; Ishii, Tetsuya; Yoshimochi, Hiroshi; Asaga, Takeo; Kurosaki, Ken

    2007-07-01

    A rational MA recycle concept based on high Am content fuel has been proposed. A design study of an Am- MOX fabrication plant, which is a key facility for the MA recycle concept, has been done and the facility concept was clarified from the viewpoint of basic process viability. Preliminary cost estimation suggested that the total construction cost of the MA recycle facilities including Am-MOX, Np-MOX and MA recovery could be comparable with that of the large scale LWR-MOX fabrication plant required for plutonium in LWR fuel cycle. (authors)

  10. Machine vision method and apparatus

    SciTech Connect (OSTI)

    Iadipaolo, R.M.; Tkaczyk, R.J.

    1987-07-07

    A machine vision apparatus is described for acquiring the image of a moving object comprising: means for moving the object along a predetermined path; a first linear sensor arranged to track the progress of the object along the path and for generating signals representing objects positions; a second linear sensor arranged to sense portions of the object in a plane transverse of the path for generating streams of data representing line images in the plane; and synchronizing means coupled to the sensors and responsive to the signals for outputting streams of data from the second sensor at predetermined object positions whereby as the object advances through the plane the second sensor obtains many lines images which cumulatively represent an image of the object.

  11. Mining machine having vibration sensor

    SciTech Connect (OSTI)

    Peterson, C.R.

    1987-04-07

    This patent describes a mining machine having means for sensing property variations of the materials associated with a seam of a mine comprising: a cutting tool including a member rotatable about an axis, at least one cutter carried by the rotatable member at a point spaced from the axis for cutting material from the seam, a conductor rod carried by the rotatable member and held in releasable engagement with the cutter, the rod extending to the axis of the rotatable member to conduct to the axis, strain waves which are induced by variations in cutter vibration as the cutter encounters property variations of the materials associated with the seam, and a transducer located at the axis of the rotatable member in communication with the conductor rod to convert the strain waves in the rod to electric signals.

  12. DOE Funds Demonstration of "Ultrasonic Machining"

    Office of Energy Efficiency and Renewable Energy (EERE)

    Approximately 50 people attended a demonstration of a technology called "ultrasonic machining" at AREVA's Technical Training Center on June 9, 2011. The technology, originally developed by the Edison Welding Institute (EWI), applies ultrasonic acoustic vibrations to traditional machining processes to reduce friction and improve performance.

  13. Two-Beam Instability in Electron Cooling

    SciTech Connect (OSTI)

    Burov, Alexey V.; /Fermilab

    2006-04-01

    The drift motion of cooling electrons makes them able to respond to transverse perturbations of a cooled ion beam. This response may lead to dipole or quadrupole transverse instabilities at specific longitudinal wave numbers. While the dipole instabilities can be suppressed by a combination of the Landau damping, machine impedance, and the active damper, the quadrupole and higher order modes can lead to either emittance growth, or a lifetime degradation, or both. The growth rates of these instabilities are strongly determined by the machine x-y coupling. Thus, tuning out of the coupling resonance and/or reduction of the machine coupling can be an efficient remedy for these instabilities.

  14. Hadron physics at the new CW electron accelerators

    SciTech Connect (OSTI)

    Burkert, V.D.

    1990-01-01

    Major trends of the physics program related to the study of hadron structure and hadron spectroscopy at the new high current, high duty cycle electron machines are discussed. It is concluded that planned experiments at these machines may have important impact on our understanding of the strong interaction by studying the internal structure and spectroscopy of the nucleon and lower mass hyperon states.

  15. Machinability study of Aermet 100

    SciTech Connect (OSTI)

    Squire, D.V.; Syn, C.K.; Fix, B.L.

    1995-02-08

    Machinability of Aermet 100, an ultrahigh strength alloy developed for Navy by Carpenter Technology as a candidate material for aircraft landing gear application, was studied by performing single-point turning tests. Coated and uncoated carbides, ceramic, and cermet cutting tool inserts of a square geometry (SNG 432 type) were used. Round stock workpieces were tested in the as - received, unaged condition and without using any cutting fluid. The turning tests for each tool material were conducted by (i) first establishing the cutting conditions that would allow the continued generation of broken chips during a given cutting test, (ii) measuring intermittently the flank wear as a function of cutting time under such established cutting conditions for discontinuous broken chips, and (iii) determining the tool life using the criteria specified in the ISO Standard 3685: 1993(E). Cutting tools except some uncoated carbide and ceramic were used with a mechanical chip breaker to induce chip breakage and avoid the generation of long continuous chips. The results obtained include the optimal cutting conditions for discontinuous chips, tool wear - cutting time curves, and records of tool life and tool failure mode for each tool material. From the measured tool life and cutting conditions, the amount of material removed by each cutting material was calculated. Coated carbide with CVD tri-phase coating showed the longest tool life that exceeded the twelve minute criterion and removed the highest amount of material per tool. Other tools failed by cutting edge chipping and their lives were shorter.

  16. Catalyzing Alpha-Channeling by Minority Ion Injection in Mirror Machines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Inventors Andrey Zhmoginov and Nathaniel Fisch | Princeton Plasma Physics Lab Catalyzing Alpha-Channeling by Minority Ion Injection in Mirror Machines Inventors Andrey Zhmoginov and Nathaniel Fisch Maintaining fuel ions hotter than electrons would greatly facilitate controlled nuclear fusion. Alpha channeling is a technique that can potentially extract energy from fusion alpha particles before the energy is lost to the electrons, through collisions and transfer to the background fuel ions,

  17. Controlling Motion at the Nanoscale: Rise of the Molecular Machines...

    Office of Scientific and Technical Information (OSTI)

    Published Article: Controlling Motion at the Nanoscale: Rise of the Molecular Machines Title: Controlling Motion at the Nanoscale: Rise of the Molecular Machines Authors: ...

  18. Other: Nanoscale Machines: These Squeaky Wheels Will Get No Grease...

    Office of Scientific and Technical Information (OSTI)

    Nanoscale Machines: These Squeaky Wheels Will Get No Grease Citation Details Title: Nanoscale Machines: These Squeaky Wheels Will Get No Grease

  19. KCP relocates 18-ton machine | National Nuclear Security Administratio...

    National Nuclear Security Administration (NNSA)

    relocations. It took nearly three days to disassemble the machine and prepare it for transport. The machine was partially disassembled, removing auxiliary pieces from the main...

  20. Mid States Tool and Machine Inc | Open Energy Information

    Open Energy Info (EERE)

    Tool and Machine Inc Jump to: navigation, search Name: Mid States Tool and Machine Inc Place: decatur, Indiana Zip: 46733 Sector: Services Product: Provides engineering and...

  1. Jiangsu Yawei Machine Tool Co | Open Energy Information

    Open Energy Info (EERE)

    Yawei Machine Tool Co Jump to: navigation, search Name: Jiangsu Yawei Machine Tool Co Place: Jiangsu Province, China Product: Chinese sheet matal fabrication industry manufacturer....

  2. International Business Machines Corp IBM | Open Energy Information

    Open Energy Info (EERE)

    Business Machines Corp IBM Jump to: navigation, search Name: International Business Machines Corp (IBM) Place: Armonk, New York Zip: 10504 Sector: Services Product: IBM is a...

  3. Machine Learning for the Grid (Conference) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Conference: Machine Learning for the Grid Citation Details In-Document Search Title: Machine Learning for the Grid Authors: Deka, Deepjyoti 1 ; Backhaus, Scott N. 1 ; Chertkov, ...

  4. Machine learning strategy for accelerated design of polymer dielectric...

    Office of Scientific and Technical Information (OSTI)

    Machine learning strategy for accelerated design of polymer dielectrics Citation Details In-Document Search Title: Machine learning strategy for accelerated design of polymer ...

  5. Purchasing Energy-Efficient Water-Cooled Ice Machines | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Purchasing Energy-Efficient Water-Cooled Ice Machines Purchasing Energy-Efficient Water-Cooled Ice Machines The Federal Energy Management Program (FEMP) provides efficiency ...

  6. Z Machine | National Nuclear Security Administration | (NNSA)

    National Nuclear Security Administration (NNSA)

    Z Machine Air-gas breakdown when Z Machine at Sandia National Laboratories fires. The Z Machine is a pulsed power driver that delivers enormous power in a short duration pulse to a small complex target at the center of the large (34 meters in diameter) accelerator. Pulsed power technology is used to store 20 megajoules of electrical energy over a period of minutes and then to release that energy in a short duration (100- to 300-nanosecond) immense power burst. Z's experimental strength is its

  7. Electric machine for hybrid motor vehicle

    SciTech Connect (OSTI)

    Hsu, John Sheungchun

    2007-09-18

    A power system for a motor vehicle having an internal combustion engine and an electric machine is disclosed. The electric machine has a stator, a permanent magnet rotor, an uncluttered rotor spaced from the permanent magnet rotor, and at least one secondary core assembly. The power system also has a gearing arrangement for coupling the internal combustion engine to wheels on the vehicle thereby providing a means for the electric machine to both power assist and brake in relation to the output of the internal combustion engine.

  8. Z Machine | National Nuclear Security Administration | (NNSA...

    National Nuclear Security Administration (NNSA)

    Z's experimental strength is its ability to produce large amounts of energy (about 3 megajoules) in x-rays, large plasma environments, and controlled high pressures. The Z Machine ...

  9. Seattle City Light- Vending Machine Rebate Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    Seattle City Light offers qualifying customers $80 rebates for the purchase of VendingMiser Energy Efficient Vending Machines. VendingMiser reduces the energy consumption of cold drink vending...

  10. Sandia National Laboratories: Contact Z-Machine

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    About Z Z Research Z News Contact Us Facebook Twitter YouTube Flickr RSS Z-Machine Contact Z For more information, please contact us. * Items are Required First Name * Last Name *...