Powered by Deep Web Technologies
Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Development of High Efficacy, Low Cost Phosphorescent Oled Lightning Luminaire  

SciTech Connect (OSTI)

In this two year program, UDC together with Armstrong World Industries, Professor Stephen Forrest (University of Michigan) and Professor Mark Thompson (University of Southern California) planned to develop and deliver high efficiency OLED lighting luminaires as part of an integrated ceiling illumination system that exceed the Department of Energy (DOE) 2010 performance projections. Specifically the UDC team in 2010 delivered two prototype OLED ceiling illumination systems, each consisting of four individual OLED lighting panels on glass integrated into Armstrong's novel TechZone open architecture ceiling systems, at an overall system efficacy of 51 lm/W, a CRI = 85 and a projected lifetime to 70% of initial luminance to exceed 10,000 hours. This accomplishment represents a 50% increase in luminaire efficacy and a factor of two in lifetime over that outlined in the solicitation. In addition, the team has also delivered one 15cm x 15cm lighting panel fabricated on a flexible metal foil substrate, demonstrating the possibility using OLEDs in a range of form factors. During this program, our Team has pursued the commercialization of these OLED based ceiling luminaires, with a goal to launch commercial products within the next three years. We have proven that our team is ideally suited to develop these highly novel and efficient solid state lighting luminaires, having both the technical experience and commercial strategy to leverage work performed under this contract. Our calculations show that the success of our program could lead to energy savings of more than 0.5 quads or 8 MMTC (million metric tons of carbon) per year by 2016.

Michael Hack

2010-07-09T23:59:59.000Z

2

Thermal trim for luminaire  

DOE Patents [OSTI]

A luminaire with a thermal pathway to reduce the junction temperature of the luminaire's light source, and methods for so doing, are disclosed. The luminaire includes a can, a light engine, and a trim, that define a substantially continuous thermal pathway from the light engine to a surrounding environment. The can defines a can cavity and includes a can end region. The light engine is within the can cavity and includes a light source and a heat sink, including a heat sink end region, coupled thereto. The trim is at least partially disposed within the can cavity and includes a first trim end region coupled to the heat sink end region and a second trim end region coupled to the can end region. Thermal interface material may be located between: the heat sink and the trim, the trim and the can, and/or the heat sink and the light source.

Bazydola, Sarah; Ghiu, Camil-Daniel; Harrison, Robert; Jeswani, Anil

2013-11-19T23:59:59.000Z

3

Next Generation Luminaires Design Competition Announces 2013...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Next Generation Luminaires Design Competition Announces 2013 Outdoor Winners Next Generation Luminaires Design Competition Announces 2013 Outdoor Winners February 27, 2014 -...

4

Ultra-Compact High-Efficiency Luminaire for General Illumination  

SciTech Connect (OSTI)

Cree has developed a new ultra-compact light emitting diode (LED) luminaire capable of providing high efficacy with excellent color quality that can lead to significant energy savings in todayâ??s commercial and retail applications. This success was based on an integrated development effort tailoring the LED component characteristics, optics, thermal management and driver design for the small footprint to achieve an overall system efficiency of â?Ą 70%. A new LED component was designed to provide high brightness and efficacy in a form factor that allowed for a small directional beam with a luminaire housing design able to dissipate the heat effectively using a small physical envelope. A very compact, 90% efficient driver was developed to meet the system performance while not taking away any thermal mass from the heat sink. A 91% efficient secondary optics was designed to maximize efficiency while providing a smooth beam. The reliability of the new LED component was robust under accelerated testing conditions. Luminaires were assembled integrating the novel LED component, secondary optics, heat sink and driver technology to demonstrate the system improvement. Cree has successfully completed this project by developing an ultra-compact LED luminaire that provided 380 lumens at a correlated color temperature (CCT) of 2822 K and color rendering index (CRI) of 94 with an efficacy of 94 lumens per watt (LPW) when operating at 4 W input power (steady state) with an overall system efficiency of 81%. At a higher input power of 9 Watts, the lamp provided 658 lumens at 71 LPW.

Ted Lowes

2012-04-08T23:59:59.000Z

5

Small Area Array-Based LED Luminaire Design  

SciTech Connect (OSTI)

This report contains a summary of technical achievements during a three-year project to demonstrate high efficiency LED luminaire designs based on small area array-based gallium nitride diodes. Novel GaN-based LED array designs are described, specifically addressing the thermal, optical, electrical and mechanical requirements for the incorporation of such arrays into viable solid-state LED luminaires. This work resulted in the demonstration of an integrated luminaire prototype of 1000 lumens cool white light output with reflector shaped beams and efficacy of 89.4 lm/W at CCT of 6000oK and CRI of 73; and performance of 903 lumens warm white light output with reflector shaped beams and efficacy of 63.0 lm/W at CCT of 2800oK and CRI of 82. In addition, up to 1275 lumens cool white light output at 114.2 lm/W and 1156 lumens warm white light output at 76.5 lm/W were achieved if the reflector was not used. The success to integrate small area array-based LED designs and address thermal, optical, electrical and mechanical requirements was clearly achieved in these luminaire prototypes with outstanding performance and high efficiency.

Thomas Yuan

2008-01-09T23:59:59.000Z

6

Thermal trim for a luminaire  

DOE Patents [OSTI]

A luminaire with a thermal pathway to reduce the junction temperature of the luminaire's light source, and methods for so doing, are disclosed. The luminaire includes a can, a light engine, and a trim, that define a substantially continuous thermal pathway from the light engine to a surrounding environment. The can defines a can cavity and includes a can end region. The light engine is within the can cavity and includes a light source and a heat sink, including a heat sink end region, coupled thereto. The trim is at least partially disposed within the can cavity and includes a first trim end region coupled to the heat sink end region and a second trim end region coupled to the can end region. Thermal interface material may be located between: the heat sink and the trim, the trim and the can, and/or the heat sink and the light source.

Bazydola, Sarah; Ghiu, Camil-Daniel; Harrison, Robert; Jeswani, Anil

2013-02-19T23:59:59.000Z

7

Covered Product Category: Fluorescent Luminaires  

Broader source: Energy.gov [DOE]

FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including fluorescent luminaires. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

8

Model Specification for LED Roadway Luminaires Webcast  

Broader source: Energy.gov [DOE]

This November 15, 2011 webcast presented information about the Model Specification for LED Roadway Luminaires developed by DOE's Municipal Solid-State Street Lighting Consortium. During the webcast...

9

Covered Product Category: Light Fixtures (Luminaires)  

Broader source: Energy.gov [DOE]

FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including luminaires, or light fixtures. The luminaires product category is very broad and covers a wide variety of lighting products. Both ENERGY STAR® and FEMP provide programmatic guidance for various types of luminaires. See table 2 for more information about which types of light fixtures are covered by which program (FEMP or ENERGY STAR). Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

10

LOW-COST LED LUMINAIRE FOR GENERAL ILLUMINATION  

SciTech Connect (OSTI)

During this two-year Solid-State Lighting (SSL) Manufacturing R&D project Cree developed novel light emitting diode (LED) technologies contributing to a cost-optimized, efficient LED troffer luminaire platform emitting at ~3500K correlated color temperature (CCT) at a color rendering index (CRI) of >90. To successfully achieve program goals, Cree used a comprehensive approach to address cost reduction of the various optical, thermal and electrical subsystems in the luminaire without impacting performance. These developments built on Cree’s high- brightness, low-cost LED platforms to design a novel LED component architecture that will enable low-cost troffer luminaire designs with high total system efficacy. The project scope included cost reductions to nearly all major troffer subsystems as well as assembly costs. For example, no thermal management components were included in the troffer, owing to the optimized distribution of compact low- to mid-power LEDs. It is estimated that a significant manufacturing cost savings will result relative to Cree’s conventional troffers at the start of the project. A chief project accomplishment was the successful development of a new compact, high-efficacy LED component geometry with a broad far-field intensity distribution and even color point vs. emission angle. After further optimization and testing for production, the Cree XQ series of LEDs resulted. XQ LEDs are currently utilized in Cree’s AR series troffers, and they are being considered for use in other platforms. The XQ lens geometry influenced the independent development of Cree’s XB-E and XB-G high-voltage LEDs, which also have a broad intensity distribution at high efficacy, and are finding wide implementation in Cree’s omnidirectional A-lamps.

Lowes, Ted

2014-07-31T23:59:59.000Z

11

Compact light source performance in recessed type luminaires  

SciTech Connect (OSTI)

Photometric comparisons were made with an indoor, recessed, type luminaire using incandescent, high intensity discharge and compact fluorescent lamps. The test results show substantial performance advantages, as expected, for the discharge light sources where the efficacy gains can be in the order for 400% even when including the ballast losses associated with the discharge lamps. The candlepower distribution patterns emerging from these luminaries are also different from those associated with the baseline incandescent lamps, and which are in some ways, even more desirable from a uniformity of illuminance perspective. A section on fluorescent lamp starting is also included which describes a system having excellent starting characteristics in terms of electrode starting temperature (RH/RC technique), proper operating frequency to minimize unwanted IR interactions, and satisfactory current crest factor values to help insure life performance.

Hammer, E.E.

1998-11-01T23:59:59.000Z

12

TEXT-ALTERNATIVE VERSION: NEXT GENERATION LUMINAIRES INDOOR JUDGING 2014  

Broader source: Energy.gov [DOE]

Dan Blitzer, NGL Steering Committee, The Practical Lighting Workshop: Products that have been evaluated by the Next Generation Luminaires Design Competition have been vetted to a degree that no...

13

Text-Alternative Version: Model Specification for LED Roadway Luminaires Webcast  

Broader source: Energy.gov [DOE]

Below is the text-alternative version of the "Model Specification for LED Roadway Luminaires" webcast, held November 15, 2011.

14

Text-Alternative Version: Successful Selection of LED Streetlight Luminaires Webcast  

Broader source: Energy.gov [DOE]

Below is the text-alternative version of the "Successful Selection of LED Streetlight Luminaires" webcast, held March 6, 2013.

15

Assessment of LED Technology in Ornamental Post-Top Luminaires (Host Site: Sacramento, CA)  

SciTech Connect (OSTI)

The DOE Municipal Solid-State Street Lighting Consortium has evaluated four different LED replacements for existing ornamental post-top street lights in Sacramento, California. The project team was composed of the City and its consultant, PNNL (representing the Consortium), and the Sacramento Municipal Utility District. Product selection was finalized in March 2011, yielding one complete luminaire replacement and three lamp-ballast retrofit kits. Computer simulations, field measurements, and laboratory testing were performed to compare the performance and cost-effectiveness of the LED products relative to the existing luminaire with 100 W high-pressure sodium lamp. After it was confirmed the LED products were not equivalent to HPS in terms of initial photopic illumination, the following parameters were scaled proportionally to enable equitable (albeit hypothetical) comparisons: light output, input wattage, and pricing. Four replacement scenarios were considered for each LED product, incorporating new IES guidance for mesopic multipliers and lumen maintenance extrapolation, but life cycle analysis indicated cost effectiveness was also unacceptable. Although LED efficacy and pricing continue to improve, this project serves as a timely and objective notice that LED technology may not be quite ready yet for such applications.

Tuenge, Jason R.

2011-12-01T23:59:59.000Z

16

Covered Product Category: Industrial Luminaires (High/Low Bay)  

Broader source: Energy.gov [DOE]

The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for Industrial Luminaires (High/Low Bay). Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

17

Solution-Procesed Small-Molecule OLED Luminaire for Interior Illumination  

SciTech Connect (OSTI)

Prototype lighting panels and luminaires were fabricated using DuPont Displaysâ?? solution-processed small-molecule OLED technology. These lighting panels were based on a spatially-patterned, 3-color design, similar in concept to an OLED display panel, with materials chosen to maximize device efficacy. The majority of the processing steps take place in air (rather than high vacuum). Optimization of device architecture, processing and construction was undertaken, with a final prototype design of 50 cm{sup 2} being fabricated and tested. Performance of these panels reached 35 lm/W at illuminant-A. A unique feature of this technology is the ability to color tune the emission, and color temperatures ranging from 2700 to > 6,500K were attained in the final build. Significant attention was paid to low-cost fabrication techniques.

Parker, Ian

2012-02-29T23:59:59.000Z

18

Text-Alternative Version: SSL Luminaire Performance in the Lab: Just How Well Do They Perform?  

Broader source: Energy.gov [DOE]

Below is the text-alternative version of the SSL Luminaire Performance in the Lab: Just How Well Do They Perform webcast.

19

OSRAM SYLVANIA Demonstrates 1,439-Lumen Downlight with Efficacy of 82 lm/W  

Broader source: Energy.gov [DOE]

OSRAM SYLVANIA researchers have demonstrated a downlight luminaire that achieves 1,439 lumens at an efficacy of 82 lm/W in steady-state operation. These results exceed the project goals of achieving 1,300 lumens and 70 lm/W at a CCT of 3500K and CRI of 80. Improvements in LED chips, phosphors, optics, electronics, and thermal management at OSRAM all contributed to the higher-than-projected luminaire performance.

20

Successful Selection of LED Streetlight Luminaires: Optimizing Illumination and Economic Performance  

Broader source: Energy.gov [DOE]

This March 6, 2013 webcast reviewed the factors involved in successful selection of LED streetlight luminaires. Presenters Eric Haugaard of Cree Lighting and Chad Stalker of Philips Lumileds guided...

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

High Quality Down Lighting Luminaire with 73% Overall System Efficiency  

SciTech Connect (OSTI)

This report summarizes work to develop a high flux, high efficiency LED-based downlight at OSRAM SYLVANIA under US Department of Energy contract DE-FC26-08NT01582. A new high power LED and electronic driver were developed for these downlights. The LED achieved 100 lumens per watt efficacy and 1700 lumen flux output at a correlated color temperature of 3500K. The driver had 90% electrical conversion efficiency while maintaining excellent power quality with power factor >0.99, and total harmonic distortion <10%. Two styles of downlights using the LED and driver were shown to exceed the project targets for steady-state luminous efficacy and flux of 70 lumens per watt and 1300 lumens, respectively. Compared to similar existing downlights using compact fluorescent or LED sources, these downlights had much higher efficacy at nearly the same luminous flux.

Robert Harrison; Steven C. Allen; Joseph Bernier; Robert Harrison

2010-08-31T23:59:59.000Z

22

UDC Teaming with Acuity to Make Commercial-Sector PHOLED Luminaire  

Broader source: Energy.gov [DOE]

With support from DOE's Small Business Innovation Research program, Universal Display Corporation (UDC) is working with Acuity Brands Lighting to make an efficient, color-tunable luminaire for use in the commercial sector using UDC's proprietary phosphorescent OLED (PHOLED™) technology. The present project aims to adapt this technology—which increases the energy efficiency of OLEDs by as much as fourfold—to high-end commercial and institutional building applications.

23

UDC Develops Prototype High-Efficiency OLED Undercabinet Luminaire  

Broader source: Energy.gov [DOE]

Universal Display Corporation (UDC) has demonstrated the real-world application of a novel lighting technology by developing two pre-prototype OLED undercabinet lighting systems that exceed 420 total lumens at an efficacy of more than 55 lm/W, with an estimated lifetime (LT70) in excess of 10,000 hours, and a color rendering index (CRI) greater than 85.

24

Low glare luminaire for thin seam mining. Open file report 29 Sep 78-28 Feb 82  

SciTech Connect (OSTI)

Work places of an underground coal mine are required (30 CFR 1719) to be illuminated while self-propelled equipment is used. Permissible machine-mounted systems have been developed and applied satisfactorily to many mining operations. However, some low-seam and thin-seam equipment has been difficult to illuminate because reliable, direct current (dc) systems and compact, low output, low-glare luminaires were not available. This program resulted in the design and prototype construction of compact, low-glare luminaires and alternate current (ac) power systems, particularly suited to resolving illumination problems on low- and thin-seam mining equipment. Design objectives were based on enhancing the prospects for thin-seam illumination solutions through definition of a product that could challenge markets enjoyed by higher glare luminaires and through reduction of technical risks associated with any new product development as well as the MSHA certification process.

Parker, J.R.; Hahn, W.F.

1982-10-01T23:59:59.000Z

25

An Integrated Solid-State LED Luminaire for General Lighting  

SciTech Connect (OSTI)

A strong systems approach to designing and building practical LED-based replacement lamps is lacking. The general method of taking high-performance LEDs and marrying them to standard printed circuit boards, drivers and a heat sink has fallen short of the promise of LED lighting. In this program, a top-down assessment of requirements and a bottom-up reinvention of LED sources, electronics, optics and mechanics have resulted in the highest performance lamp possible. The team, comprised of Color Kinetics, the leaders in LED lighting and Cree, the leaders in LED devices took an approach to reinvent the package, the driver and the overall form and aesthetic of a replacement source. The challenge was to create a new benchmark in LED lighting - the resultant lamp, a PAR38 equivalent, met the light output, color, color quality and efficacy marks set out in the program as well as being dimmable, which is important for market acceptance. The approach combined the use of multiple source die, a chip-on-board approach, a very efficient driver topology, the use of both direct emission and phosphor conversion, and a unique faceted optic to avoid the losses, artifacts and hotspots of lensed approaches. The integral heat sink provided a mechanical base and airflow using a chimney-effect for use in a wide variety of locations and orientations. These research results led to a much better understanding of the system effects of component level technologies. It was clear that best-of-breed sub-system results do not necessarily result in the best end result for the complete system. In doing this work, we did not neglect the practical aspects of these systems. These were not rarified results and commercially impractical but lent themselves to eventual commercial products in the marketplace. The end result - a high performance replacement lamp - will save significant energy while providing a high-quality light source.

Kevin Dowling; Fritz Morgan Ihor Lys; Mike Datta; Bernd Keller; Thomas Yuan

2009-03-31T23:59:59.000Z

26

Long-term Testing Results for the 2008 Installation of LED Luminaires at the I-35 West Bridge in Minneapolis  

SciTech Connect (OSTI)

This document reports the long-term testing results from an extended GATEWAY project that was first reported in “Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting at the I-35W Bridge, in Minneapolis, MN,” August 2009. That original report presented the results of lighting the newly reconstructed I 35W Bridge using LEDs in place of conventional high-pressure sodium (HPS) roadway luminaires, comparing energy use and illuminance levels with a simulated baseline condition. That installation was an early stage implementation of LED lighting and remains one of the oldest installations in continued operation today. This document provides an update of the LED system’s performance since its installation in September 2008.

Kinzey, Bruce R.; Davis, Robert G.

2014-09-30T23:59:59.000Z

27

SSL Pricing and Efficacy Trend Analysis for Utility Program Planning  

SciTech Connect (OSTI)

An LED lamp or luminaire can generally be found that matches or exceeds the efficacy of benchmark technologies in a given product category, and LED products continue to expand into ever-higher lumen output niches. However, the price premium for LED continues to pose a barrier to adoption in many applications, in spite of expected savings from reduced energy use and maintenance. Other factors—such as dimmability and quality of light—can also present challenges. The appropriate type, timing, and magnitude of energy efficiency activities will vary from organization to organization based on local variables and the method of evaluation. A number of factors merit consideration when prioritizing activities for development. Category-specific projections for pricing and efficacy are provided herein to assist in efficiency program planning efforts.

Tuenge, Jason R.

2013-10-01T23:59:59.000Z

28

A spreadsheet for analyzing the in situ performance of fluorescent luminaires  

SciTech Connect (OSTI)

A spreadsheet program for determining system efficacy, power input and light output of common 4 ft fluorescent lighting systems under realistic operating conditions is described. The program uses accepted IES engineering principles to precisely account for ballast factor, existing thermal conditions and maintenance practices. The spreadsheet, which includes a data base of lamp and ballast performance data, can be used to calculate the cost-effectiveness of many common lighting retrofits.

Rubinstein, F.; Zhang, Chin.

1991-08-01T23:59:59.000Z

29

ENTOMOLOGY O.B. Kovanci et al. (2005) Phytoparasitica 33(4):334-342 Effects of Application Rate and Interval on the Efficacy of  

E-Print Network [OSTI]

ENTOMOLOGY O.B. Kovanci et al. (2005) Phytoparasitica 33(4):334-342 Effects of Application Rate sustain themselves in apples alone in NC, Received Nov. 22, 2004; accepted March 12, 2005; http://www.phytoparasitica

30

STATE OF CALIFORNIA --THE RESOURCES AGENCY Edmund G. Brown Jr. CALIFORNIA ENERGY COMMISSION  

E-Print Network [OSTI]

as a residential high efficacy luminaire using Light Emitting Diode (LED) as the light source (as defined in IES LM

31

NEXT GENERATION LUMINAIRES INDOOR JUDGING 2014  

Broader source: Energy.gov [DOE]

View this behind-the-scenes look at the 2014 NGL judging event where entries were evaluated by a panel of judges drawn from the architectural lighting community in an intensive three-step process...

32

WAGES, FLEXIBLE EXCHANGE RATES, AND MACROECONOMIC POLICY*  

E-Print Network [OSTI]

WAGES, FLEXIBLE EXCHANGE RATES, AND MACROECONOMIC POLICY* JEFFREY SACHS In an open economy with a floaLing exchange rate, the efficacy of fiscal and monetary policy depends fundamentally on the wage rate depreciation, while fiscal expansion has no output effect. These results hold only when real wages

33

LED Record Efficacy and Brightness  

Broader source: Energy.gov [DOE]

Designed for general lighting applications such as street, industrial, and parking garage lighting, the Cree XLamp® power LED sets new records for LED brightness and efficacy, up to 85 lm/W at 350 mA. The XLamp utilizes Cree's performance breakthrough EZBright™ LED chip; both products include technology that was developed in part with R&D funding support from DOE.

34

Luminous Efficacy Standards for General Purpose Lights  

Broader source: Energy.gov [DOE]

Assembly Bill 178, adopted in June 2007, established efficacy* standards for general purpose lights sold in the state of Nevada. The bill set the required efficacy at 25 lumens per watt (lm/W) of...

35

CALiPER Exploratory Study: Recessed Troffer Lighting  

SciTech Connect (OSTI)

This report describes an exploration of troffer lighting as used in office and classroom spaces, which was conducted by the CALiPER program. Twenty-four pairs of 2×2 and 2×4 troffers were procured anonymously, documented, tested for photometric and electrical performance, and installed in a mockup office space in Portland, Oregon. Three of the pairs were T8 fluorescent benchmark products, 12 were dedicated LED troffers, five were fluorescent troffers modified for LED lamps (sometimes referred to as "tubes"), and another four troffers were modified with LED retrofit kits. The modifications were performed by a commercial electrical contractor, following the instructions provided by the retrofit lamp or kit manufacturer. Once installed in the mockup facility, the converted luminaires were examined by a NRTL (Nationally Recognized Testing Laboratory) safety expert, who provided feedback on safety issues. In September 2012, a group of lighting designers, engineers, and facility managers were brought in to observe the LED luminaires in comparison to fluorescent benchmarks. This report documents performance in measures that go beyond illuminance values or luminaire efficacy. Dedicated LED troffers are ready to compete with fluorescent troffers in terms of efficacy (lumens per watt), and in many lighting quality issues such as glare, light distribution, visual appearance, and color quality. That is not to say that each one is stellar, but each one tested in this CALiPER study bested the fluorescent benchmarks in terms of efficacy, and almost all were rated highly in several categories -- only one luminaire of twelve performed consistently poorly.

Miller, Naomi J.; Royer, Michael P.; Poplawski, Michael E.

2013-04-28T23:59:59.000Z

36

Rate Schedules  

Broader source: Energy.gov [DOE]

One of the major responsibilities of Southeastern is to design, formulate, and justify rate schedules. Repayment studies prepared by the agency determine revenue requirements and appropriate rate...

37

Energy Rating  

E-Print Network [OSTI]

Consistent, accurate, and uniform ratings based on a single statewide rating scale Reasonable estimates of potential utility bill savings and reliable recommendations on cost-effective measures to improve energy efficiency Training and certification procedures for home raters and quality assurance procedures to promote accurate ratings and to protect consumers Labeling procedures that will meet the needs of home buyers, homeowners, renters, the real estate industry, and mortgage lenders with an interest in home energy ratings

Cabec Conference; Rashid Mir P. E

2009-01-01T23:59:59.000Z

38

High Flux Commercial Illumination Solution with Intelligent Controls  

SciTech Connect (OSTI)

This report summarizes the work performed at OSRAM SYLVANIA under US Department of Energy contract DE-EE0003241 for developing a high efficiency LED-based luminaire. A novel light engine module (two versions: standard and super), power supply and luminaire mechanical parts were designed and tested. At steady-state, the luminaire luminous flux is 3156 lumens (lm), luminous efficacy 97.4 LPW and CRI (Ra) 88 at a correlated color temperature (CCT) of 3507K. When the luminaire is fitted with the super version of the light engine the efficacy reaches 130 LPW. In addition, the luminaire is provided with an intelligent control network capable of additional energy savings. The technology developed during the course of this project has been incorporated into a family of products. Recently, the first product in the family has been launched.

Camil Ghiu

2012-04-30T23:59:59.000Z

39

Demonstration Assessment of Light Emitting Diode (LED) Commercial Garage Lights In the Providence Portland Medical Center, Portland, Oregon  

SciTech Connect (OSTI)

This U.S. Department of Energy GATEWAY Demonstration project studied the applicability of light-emitting diode (LED) luminaires for commercial parking garage applications. High-pressure sodium (HPS) area luminaires were replaced with new LED area luminaires. The project was supported under the U.S. Department of Energy (DOE) Solid State Lighting Program. Other participants in the demonstration project included Providence Portland Medical Center in Portland, Oregon, the Energy Trust of Oregon, and Lighting Sciences Group (LSG) Inc. Pacific Northwest National Laboratory (PNNL) conducted the measurements and analysis of the results. PNNL manages GATEWAY demonstrations for DOE and represents their perspective in the conduct of the work. Quantitative and qualitative measurements of light and electrical power were taken at the site for both HPS and LED light sources. Economic costs were estimated and garage users’ responses to the new light sources were gauged with a survey. Six LED luminaires were installed in the below-ground parking level A, replacing six existing 150W HPS lamps spread out over two rows of parking spaces. Illuminance measurements were taken at floor level approximately every 4 ft on a 60-ft x 40-ft grid to measure light output of these LED luminaires which were termed the “Version 1” luminaires. PNNL conducted power measurements of the circuit in the garage to which the 6 luminaires were connected and determined that they drew an average of 82 W per lamp. An improved LED luminaire, Version 2, was installed in Level B of the parking garage. Illuminance measurements were not made of this second luminaire on site due to higher traffic conditions, but photometric measurements of this lamp and Version 1 were made in an independent testing laboratory and power usage for Version 2 was also measured. Version 1 was found to produce 3600 lumens and Version 2 was found to produce 4700 lumens of light and to consume 78 Watts. Maximum and minimum light levels were measured for the HPS and LED Version 1 luminaires and projected for the Version 2 luminaires. Maximum light levels were 23.51 foot candles, 20.54 fc, and 26.7 fc respectively and minimum light levels were 1.49 fc, 1.45 fc, and 1.88 fc. These results indicate very similar or even slightly higher light levels produced by the LED lamps, despite the higher lumen output of the HPS lamp. The LED lamps provide higher luminaire efficacy because all of the light is directed down and out. None of it is “lost” in the fixture. Also the HPS luminaire had poorly designed optics and a plastic covering that tended to get dirty and cracked, further decreasing the realized light output.[is this an accurate way to say this?] Consumer perceptions of the Version 2 LED were collected via a written survey form given to maintenance and security personnel. More than half felt the LED luminaires provided more light than the HPS lamps and a majority expressed a preference for the new lamps when viewing the relamped area through a security camera. Respondents commented that the LED luminaires were less glary, created less shadows, had a positive impact on visibility, and improved the overall appearance of the area. PNNL conducted an economic analysis and found that the Version 1 lamp produced annual energy savings of 955 kWh and energy cost savings of $76.39 per lamp at electricity rates of 6.5 cents per kWh and $105.03 at 11 cents per kWh. PNNL found that the Version 2 lamp produced annual energy savings of 991 kWh and energy cost savings of $79.26 per lamp at electricity rates of 6.5 cents per kWh and $108.98 at 11 cents per kWh. PNNL also calculated simple payback and found that Version 1 showed paybacks of 5.4 yrs at 6.5c/kWh and 4.1 yrs at 11c/kWh while Version 2 showed paybacks of 5.2 yrs at 6.5c/kWh and 3.9 yrs at 11c/kWh.

Ton, My K.; Richman, Eric E.; Gilbride, Theresa L.

2008-11-11T23:59:59.000Z

40

DOE Publishes Report on Accelerated Life Testing of SSL Luminaires...  

Broader source: Energy.gov (indexed) [DOE]

of which were attributed to solder-joint fatigue, and the other two to board-level corrosion. The findings reinforce the belief that LEDs in lighting systems are highly...

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Effect of mechanical vibrations on light emitting diode luminaires.  

E-Print Network [OSTI]

??In this work, a LED and two types of Compact fluorescent lamps were investigated for the intensity variation due to mechanical vibrations in the range… (more)

Paladugu, Jayalakshmi

2009-01-01T23:59:59.000Z

42

Covered Product Category: Industrial Luminaires (High/Low Bay...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

requirements shown in Table 1. Other high-intensity discharge lamp types, such as mercury-vapor and low-pressure sodium, have very poor color rendition. Mercury-vapor...

43

DOE Publishes Report on Accelerated Life Testing of SSL Luminaires |  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomenthe HouseStudents2.2at MultipleorderNuclearThisProgramDepartment ofLamps

44

Energy Department Announces Winners of Next Generation Luminaires(tm)  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProvedDecember 2005DepartmentDecember 2011 EMABDevelopment | DepartmentMaterial Impact

45

RTI International Develops SSL Luminaire Reliability Model | Department of  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Careerlumens_placard-green.epsEnergy1.pdfMarket37963American |Purpose01/05/14RPAM TrainingEnergy

46

Next Generation Luminaires Design Competition Announces 2013 Outdoor  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartment of Energy Advanced Framing - Building AmericaWinners |

47

Next Generation Luminaires Design Competition Announces 2014 Indoor Winners  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartment of Energy Advanced Framing - Building AmericaWinners ||

48

Next Generation Luminaires Design Competition Announces 2015 Winners |  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomen OwnedofDepartment ofJaredOak Ridge’sCutWorkers prepareEMDepartment of

49

LED LUMINAIRE LIFETIME: Recommendations for Testing and Reporting |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe10 DOEWashington, DCKickoffLDV HVAC Model

50

LED Luminaire Lifetime: Recommendations For Testing and Reporting |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe10 DOEWashington, DCKickoffLDV HVAC ModelLEDLights for

51

Low-Cost LED Luminaire for General Illumination  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe10IO1OP001Long-Termpaul_fini@cree.com CREE SBTC Low-Cost LED

52

System Reliability Model for Solid-State Lighting Luminaires | Department  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment of Energy U.S.Improve Emitter4-0140,details the FederalDepartmentpnnl.govof

53

LED Luminaire Lifetime: Recommendations for Testing and Reporting  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietipDepartmentJuneWhen IAjani Stewartand Usage ofJ.All of theseLED

54

Covered Product Category: Fluorescent Luminaires | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: Top FiveDepartmentfor EngineeringDepartment ofBoilersData

55

Covered Product Category: Industrial Luminaires (High/Low Bay) | Department  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: Top FiveDepartmentfor EngineeringDepartment ofBoilersDataHot Food Holdingof

56

Covered Product Category: Light Fixtures (Luminaires) | Department of  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: Top FiveDepartmentfor EngineeringDepartment ofBoilersDataHot Food

57

Covered Product Category: Suspended Fluorescent Luminaires | Department of  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: Top FiveDepartmentfor EngineeringDepartment| Department of EnergyRoom

58

Model Specification for LED Roadway Luminaires | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomentheATLANTA,FermiJoshuaAugust 2006 OfficeOilSeptemberThe DOE Municipal Solid-State

59

Rate schedule  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, andEpidermal Growth Factor. |INCIDENCET3PACI-T3Rate

60

Table of Contents Page i 2013 Residential Compliance Manual January 2014  

E-Print Network [OSTI]

............................................................................24 6.4.2 Incandescent Luminaires

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Demonstration Assessment of LED Roadway Lighting: NE Cully Boulevard Portland, OR  

SciTech Connect (OSTI)

A new roadway lighting demonstration project was initiated in late 2010, which was planned in conjunction with other upgrades to NE Cully Boulevard, a residential collector road in the northeast area of Portland, OR. With the NE Cully Boulevard project, the Portland Bureau of Transportation hoped to demonstrate different light source technologies and different luminaires side-by-side. This report documents the initial performance of six different newly installed luminaires, including three LED products, one induction product, one ceramic metal halide product, and one high-pressure sodium (HPS) product that represented the baseline solution. It includes reported, calculated, and measured performance; evaluates the economic feasibility of each of the alternative luminaires; and documents user feedback collected from a group of local Illuminating Engineering Society (IES) members that toured the site. This report does not contain any long-term performance evaluations or laboratory measurements of luminaire performance. Although not all of the installed products performed equally, the alternative luminaires generally offered higher efficacy, more appropriate luminous intensity distributions, and favorable color quality when compared to the baseline HPS luminaire. However, some products did not provide sufficient illumination to all areas—vehicular drive lanes, bicycle lanes, and sidewalks—or would likely fail to meet design criteria over the life of the installation due to expected depreciation in lumen output. While the overall performance of the alternative luminaires was generally better than the baseline HPS luminaire, cost remains a significant barrier to widespread adoption. Based on the cost of the small quantity of luminaires purchased for this demonstration, the shortest calculated payback period for one of the alternative luminaire types was 17.3 years. The luminaire prices were notably higher than typical prices for currently available luminaires purchased in larger quantities. At prices that are more typical, the payback would be less than 10 years. In addition to the demonstration luminaires, a networked control system was installed for additional evaluation and demonstration purposes. The capability of control system to measure luminaire input power was explored in this study. A more exhaustive demonstration and evaluation of the control system will be the subject of future GATEWAY report(s).

Royer, Michael P.; Poplawski, Michael E.; Tuenge, Jason R.

2012-06-29T23:59:59.000Z

62

Baker-Barry Tunnel Lighting: Evaluation of a Potential GATEWAY Demonstrations Project  

SciTech Connect (OSTI)

The U.S. Department of Energy is evaluating the Baker-Barry Tunnel as a potential GATEWAY Demonstrations project for deployment of solid-state lighting (SSL) technology. The National Park Service views this project as a possible proving ground and template for implementation of light-emitting diode (LED) luminaires in other tunnels, thereby expanding the estimated 40% energy savings from 132 MWh/yr to a much larger figure nationally. Most of the energy savings in this application is attributable to the instant-restrike capability of LED products and to their high tolerance for frequent on/off switching, used here to separately control either end of the tunnel during daytime hours. Some LED luminaires rival or outperform their high-intensity discharge (HID) counterparts in terms of efficacy, but options are limited, and smaller lumen packages preclude true one-for-one equivalence. However, LED products continue to improve in efficacy and affordability at a rate unmatched by other light source technologies; the estimated simple payback period of eight years (excluding installation costs and maintenance savings) can be expected to improve with time. The proposed revisions to the existing high-pressure sodium (HPS) lighting system would require slightly increased controls complexity and significantly increased luminaire types and quantities. In exchange, substantial annual savings (from reduced maintenance and energy use) would be complemented by improved quantity and quality of illumination. Although advanced lighting controls could offer additional savings, it is unclear whether such a system would prove cost-effective; this topic may be explored in future work.

Tuenge, Jason R.

2011-06-28T23:59:59.000Z

63

Chlorite Dissolution Rates  

SciTech Connect (OSTI)

Spreadsheets provides measured chlorite rate data from 100 to 300C at elevated CO2. Spreadsheet includes derived rate equation.

Carroll, Susan

2013-07-01T23:59:59.000Z

64

Chlorite Dissolution Rates  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Spreadsheets provides measured chlorite rate data from 100 to 300C at elevated CO2. Spreadsheet includes derived rate equation.

Carroll, Susan

65

The Interest Rate Conundrum  

E-Print Network [OSTI]

Flows and US Interest Rates,” NBER Working Paper No 12560. [Working Paper # 2008 -03 The Interest Rate Conundrum Roger

Craine, Roger; Martin, Vance L.

2009-01-01T23:59:59.000Z

66

DOE Publishes Pricing and Efficacy Trend Analysis for Utility...  

Broader source: Energy.gov (indexed) [DOE]

a new report, SSL Pricing and Efficacy Trend Analysis for Utility Program Planning. The report was created in response to requests from utilities and energy efficiency...

67

aom efficacy study: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

variations in poor localities influence the capacity for community efficacy. Through a multivariate analysis using 497 households in poor localities of Addis Ababa, we...

68

UDC Demonstrates Phosphorescent OLED Systems  

Broader source: Energy.gov [DOE]

Universal Display Corporation (UDC), along with project partners Armstrong World Industries and the universities of Michigan and Southern California, have successfully demonstrated two phosphorescent OLED (PHOLED™) luminaire systems, the first of their kind in the U.S. This achievement marks a critical step in the development of practical OLED lighting in a complete luminaire system, including decorative housing, power supply, mounting, and maintenance provisions. Each luminaire has overall dimensions of approximately 15x60 cm and is comprised of four 15x15 cm phosphorescent OLED panels. With a combined power supply and lamp efficacy of 51 lm/W, the prototype luminaire is about twice as efficient as the market-leading halogen-based systems. In addition, the prototype OLED lighting system snaps into Armstrong's TechZone™ Ceiling System, which is commercially available in the U.S.x

69

Cost-Efficacy in Wetland Restoration Projects in Coastal Louisiana  

E-Print Network [OSTI]

ARTICLE Cost-Efficacy in Wetland Restoration Projects in Coastal Louisiana Joy Merino & Christiane, such as wetland loss, influence CWPPRA project selection for funding. We found that the program was selecting cost- effective projects overall. Cost efficacy varied significantly by restoration project type, with barrier

70

Radiation Leukemogenesis at Low Dose Rates  

SciTech Connect (OSTI)

The major goals of this program were to study the efficacy of low dose rate radiation exposures for the induction of acute myeloid leukemia (AML) and to characterize the leukemias that are caused by radiation exposures at low dose rate. An irradiator facility was designed and constructed that allows large numbers of mice to be irradiated at low dose rates for protracted periods (up to their life span). To the best of our knowledge this facility is unique in the US and it was subsequently used to study radioprotectors being developed for radiological defense (PLoS One. 7(3), e33044, 2012) and is currently being used to study the role of genetic background in susceptibility to radiation-induced lung cancer. One result of the irradiation was expected; low dose rate exposures are ineffective in inducing AML. However, another result was completely unexpected; the irradiated mice had a very high incidence of hepatocellular carcinoma (HCC), approximately 50%. It was unexpected because acute exposures are ineffective in increasing HCC incidence above background. This is a potential important finding for setting exposure limits because it supports the concept of an 'inverse dose rate effect' for some tumor types. That is, for the development of some tumor types low dose rate exposures carry greater risks than acute exposures.

Weil, Michael; Ullrich, Robert

2013-09-25T23:59:59.000Z

71

Effective Rate Period  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of the FY Mid-Year Change 10012013 - 03312014 04012014 - 09302014 Power Rates Annual Revenue Requirement Rate Schedule Power Revenue Requirement 73,441,557...

72

Microneedle delivery for improved efficacy of antiretroviral and antibiotic drugs  

E-Print Network [OSTI]

Two classes of drugs, antiretrovirals and antibiotics, could benefit greatly from delivery through microneedles. Microneedles (MN) offer an increase in efficacy for these drugs by providing delivery to the lymphatic system ...

Stauber, Zachary Jason

2012-01-01T23:59:59.000Z

73

Efficacy of 45 lm/W Achieved in White OLED  

Broader source: Energy.gov [DOE]

Universal Display Corporation (UDC) successfully demonstrated an all phosphorescent white organic light emitting diode (WOLED™) with a power efficacy of 45 lm/W at 1,000 cd/m2. This high-efficacy device was enabled by lowering the device operating voltage, increasing the outcoupling efficiency to ~40% from ~20%, and by incorporating highly efficient phosphorescent emitters that are capable of converting nearly all current passing through a WOLED into light.

74

Heart Rate Artifact Suppression.  

E-Print Network [OSTI]

??Motion artifact strongly corrupts heart rate measurements in current pulse oximetry systems. In many, almost any motion will greatly diminish the system’s ability to extract… (more)

Dickson, Christopher

2012-01-01T23:59:59.000Z

75

Residential Solar Valuation Rates  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Residential Solar Valuation Rates Karl R. Rbago Rbago Energy LLC 1 The Ideal Residential Solar Tariff Fair to the utility and non-solar customers Fair compensation to...

76

Effective Rate Period  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

charges or credits associated with the creation, termination, or modification to any tariff, contract, or rate schedule accepted or approved by the Federal Energy Regulatory...

77

LCC Guidance Rates  

Broader source: Energy.gov [DOE]

Notepad text file provides the LCC guidance rates in a numbered format for the various regions throughout the U.S.

78

Previous Power Rates (rates/current)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home DesignPresentations Presentations SortConferences PreviousRates

79

Power Rate Cases (pbl/rates)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006PhotovoltaicSeptember 22,ReactorAbout Power > FinancialPowerRates

80

Power Rates Announcements (pbl/rates)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006PhotovoltaicSeptember 22,ReactorAbout Power > FinancialPowerRates

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Rates Meetings and Workshops (pbl/rates)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, andEpidermal Growth Factor. |INCIDENCET3PACI-T3Rate

82

Formalizing Concepts for Efficacy-aware Business Process Modeling  

E-Print Network [OSTI]

Formalizing Concepts for Efficacy-aware Business Process Modeling Matthias Lohrmann and Manfred.lohrmann,manfred.reichert}@uni-ulm.de Abstract. In business process design, business objective models can ful- fill the role of formal business process management concepts yet. Moreover, process models are currently not sufficiently

Ulm, Universität

83

On Thermonuclear Reaction Rates  

E-Print Network [OSTI]

Nuclear reactions govern major aspects of the chemical evolution od galaxies and stars. Analytic study of the reaction rates and reaction probability integrals is attempted here. Exact expressions for the reaction rates and reaction probability integrals for nuclear reactions in the case of nonresonant, modified nonresonant, screened nonresonant and resonant cases are given. These are expressed in terms of H-functions, G-functions and in computable series forms. Computational aspects are also discussed.

H. J. Haubold; A. M. Mathai

1996-12-02T23:59:59.000Z

84

Downlight Demonstration Program: Hilton Columbus Downtown  

SciTech Connect (OSTI)

The U.S. Department of Energy (DOE) estimates that there were about 700 million downlight luminaires installed in residential and commercial buildings in the U.S. as of 2012, with light-emitting diode (LED) luminaires representing less than 1% of this installed base. Downlight luminaires using conventional incandescent, halogen, and compact fluorescent lamps have lower efficacies and shorter expected lifetimes than comparable LED systems, but the lower initial cost of the conventional technology and the uncertainties associated with the newer LED technology have restricted widespread adoption of LED downlight luminaires. About 278 tBtu of energy could be saved annually if LED luminaires were to saturate the downlight market, equating to an annual energy cost savings of $2.6 billion. This report summarizes an evaluation of LED recessed downlight luminaires in the guest rooms at the Hilton Columbus Downtown hotel in Columbus, OH. The facility opened in October of 2012, and the U.S. Department of Energy (DOE) conducted a post-occupancy assessment of the facility in January–March of 2014. Each of the 484 guest rooms uses seven 15 W LED downlights: four downlights in the entry and bedroom and three downlights in the bathroom. The 48 suites use the seven 15 W LED downlights and additional fixtures depending on the space requirements, so that in total the facility has more than 3,700 LED downlights. The downlights are controlled through wall-mounted switches and dimmers. A ceiling-mounted vacancy sensor ensures that the bathroom luminaires are turned off when the room is not occupied.

Davis, Robert G.; Perrin, Tess E.

2014-05-13T23:59:59.000Z

85

Efficacy of polymeric encapsulated C5a peptidasebased group B streptococcus vaccines in a murine model  

E-Print Network [OSTI]

Efficacy of polymeric encapsulated C5a peptidase­based group B streptococcus vaccines in a murine the efficacy of vari- ous polymeric-encapsulated C5a peptidase vaccine formulations in eliciting a long al. Efficacy of polymeric encapsulated C5a peptidase­based group B streptococcus vaccines in a murine

Salem, Aliasger K.

86

Rates and Repayment Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, andEpidermal Growth Factor.Tariff Rates FY 2015 Rates

87

Integral CFLs performance in table lamps  

SciTech Connect (OSTI)

This paper focuses on performance variations associated with lamp geometry and distribution in portable table luminaires. If correctly retrofit with compact fluorescent lamps (CFLs), these high use fixtures produce significant energy savings, but if misused, these products could instead generate consumer dissatisfaction with CFLs. It is the authors assertion that the lumen distribution of the light source within the luminaires plays a critical role in total light output, fixture efficiency and efficacy, and, perhaps most importantly, perceived brightness. The authors studied nearly 30 different integral (screw-based) CFLs available on the market today in search of a lamp, or group of lamps, which work best in portable table luminaires. The findings conclusively indicate that horizontally oriented CFLs outperform all other types of CFLs in nearly every aspect.

Page, E.; Driscoll, D.; Siminovitch, M.

1997-03-01T23:59:59.000Z

88

SSL Luminaire Performance in the Lab: Just How Well Do They Perform?  

Broader source: Energy.gov [DOE]

On December 13, 2007, Mia Paget, Pacific Northwest National Laboratory, gave an overview of the Commercially Available LED Product Evaluation and Reporting (CALiPER) Program, test procedures for...

89

Low-Cost Light-Emitting Diode Luminaire for General Illumination...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Santa Barbara Technology Center This project is demonstrating an efficient and stable white organic light-emitting diode (WOLED) using a single emitter on a planar glass...

90

Philips' LED Luminaires Brighten the Rensselaer Engineering Fabrication & Prototyping Facility (also known as the Machine Shop)  

E-Print Network [OSTI]

. #12;To help bridge its research efforts with currently available solid state lighting technology outreach to increase campus and community awareness as to the benefits of solid state lighting. About Royal a donation of LED fixtures from Philips Lighting. The Smart Lighting Sustainability Club, comprised

Linhardt, Robert J.

91

DOE Publishes CALiPER Snapshot Report on Indoor LED Luminaires | Department  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana. DOCUMENTSof Energy DOEDOEAVAILABLE ONLINE AT:Department

92

An investigation of the effects of luminaire mounting height on roadside sign placement and visibility  

E-Print Network [OSTI]

. ometer. . 21 V-1 Iso-footcand i. e Curve 30-foot Mounting Height. . . . . . . . . . . . . . . 28 Iso-footcandle Curve 40-foot Mount ing Height. . . . . . . . . . . . , . 29 V-3 Effects on Legibility Distance for C'ondit tons Shown... for Cond it rona Shown . 55 9-15 Sign Bright ress and Disabrlity Vetting Brightness for Horditior. s Shown. 56 V- 16 Sign Brigncness and Disability Veiling Brightness for 30- and 40- foot. Mounting Heights. . . . . . . . . . . . . . v-17 Sign...

Walton, Ned Ephram

1966-01-01T23:59:59.000Z

93

Model Specification for LED Roadway Luminaires, V2.0 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Careerlumens_placard-green.eps MoreWSRC-STI-2007-00250 Rev. 05 Oak09 UAn aerialIllnessVersion 2.0 of the

94

Low-Cost Light-Emitting Diode Luminaire for General Illumination |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergy Health andofIanJenniferLeslieEnergy LoanOfficialLow-Cost

95

Graduate Kentucky Metropolitan Rate Application  

E-Print Network [OSTI]

Graduate Kentucky Metropolitan Rate Application REGISTRAR'S OFFICE University of Cincinnati PO Box Kentucky counties are able to attend UC at an established metropolitan tuition rate. Non Kentucky residency, these students are not eligible for the graduate metropolitan rate. Kentucky counties

Franco, John

96

Rates and Repayment Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for1PrincipalRare Iron Oxide in AncientRates and

97

Rates and Repayment Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for1PrincipalRare Iron Oxide in AncientRates

98

Rating Agency Reports  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, andEpidermal Growth Factor.Tariff Rates FY 2015

99

BCP Annual Rate Process  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAboutScience Program CumulusA t i o nLiquids Reserve2015 BCP Annual Rate

100

Energy Management Through Innovative Rates  

E-Print Network [OSTI]

of energy efficiency in the industrial sector and specific rate design alternatives for doing so....

Williams, M. L.

1982-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

An Investigation of the Effect of After-Action Reviews on Teams' Performance-Efficacy Relationships  

E-Print Network [OSTI]

work has provided strong evidence that past performance is a better predictor of future performance than self-efficacy and that self- efficacy explains very little variance in future performance when examined longitudinally after controlling for past...?s assessment of its efficacy will be more congruent with its actual past performance of the task and as such, can be used more effectively by the team in allocating resources in pursuit of successful task performance. For example, a team that performs poorly...

Schurig, Ira

2012-07-16T23:59:59.000Z

102

Mechanisms of NDV-3 vaccine efficacy in MRSA skin versus invasive infection  

E-Print Network [OSTI]

3 vaccine efficacy in MRSA skin versus invasive infectionFig. 1) and suppression of MRSA proliferation (Fig. 2). Eachseverity and suppression of MRSA bioluminescence (Figs. 1

2014-01-01T23:59:59.000Z

103

Personal science teaching efficacy and the beliefs and practices of elementary teachers related to science instruction  

E-Print Network [OSTI]

and women in mathematics, science, and technology careers.Journal of Research in Science Teaching, 45(9), 1036-1058.development of an elementary science teaching efficacy

Lardy, Corinne H.

2011-01-01T23:59:59.000Z

104

Mathematics Self-Efficacy of Community College Students in Developmental Mathematics Courses.  

E-Print Network [OSTI]

??Mathematics self-efficacy was defined as an individual's beliefs about how he or she would perform a specific math task or in a specific mathematics or… (more)

Clutts, David Walker

2010-01-01T23:59:59.000Z

105

E-Print Network 3.0 - affected saflufenacil efficacy Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

efficacy Page: << < 1 2 3 4 5 > >> 1 Preplant Burndown, Weed Management and Cotton Response to Saflufenacil J.W. Keeling Summary: establishment and cotton growth, and 3)...

106

Landscape Planning and Biogeochemistry: Estimating and Analyzing Carbon Sequestration Efficacy In Dryland Open Space.  

E-Print Network [OSTI]

??Despite public demand for climate change mitigation and natural open space conservancy, existing political and design efforts are only beginning to address the declining efficacy… (more)

Huck, Erick Otto

2012-01-01T23:59:59.000Z

107

National Utility Rate Database: Preprint  

SciTech Connect (OSTI)

When modeling solar energy technologies and other distributed energy systems, using high-quality expansive electricity rates is essential. The National Renewable Energy Laboratory (NREL) developed a utility rate platform for entering, storing, updating, and accessing a large collection of utility rates from around the United States. This utility rate platform lives on the Open Energy Information (OpenEI) website, OpenEI.org, allowing the data to be programmatically accessed from a web browser, using an application programming interface (API). The semantic-based utility rate platform currently has record of 1,885 utility rates and covers over 85% of the electricity consumption in the United States.

Ong, S.; McKeel, R.

2012-08-01T23:59:59.000Z

108

2007 Wholesale Power Rate Schedules : 2007 General Rate Schedule Provisions.  

SciTech Connect (OSTI)

This schedule is available for the contract purchase of Firm Power to be used within the Pacific Northwest (PNW). Priority Firm (PF) Power may be purchased by public bodies, cooperatives, and Federal agencies for resale to ultimate consumers, for direct consumption, and for Construction, Test and Start-Up, and Station Service. Rates in this schedule are in effect beginning October 1, 2006, and apply to purchases under requirements Firm Power sales contracts for a three-year period. The Slice Product is only available for public bodies and cooperatives who have signed Slice contracts for the FY 2002-2011 period. Utilities participating in the Residential Exchange Program (REP) under Section 5(c) of the Northwest Power Act may purchase Priority Firm Power pursuant to the Residential Exchange Program. Rates under contracts that contain charges that escalate based on BPA's Priority Firm Power rates shall be based on the three-year rates listed in this rate schedule in addition to applicable transmission charges. This rate schedule supersedes the PF-02 rate schedule, which went into effect October 1, 2001. Sales under the PF-07 rate schedule are subject to BPA's 2007 General Rate Schedule Provisions (2007 GRSPs). Products available under this rate schedule are defined in the 2007 GRSPs. For sales under this rate schedule, bills shall be rendered and payments due pursuant to BPA's 2007 GRSPs and billing process.

United States. Bonneville Power Administration.

2006-11-01T23:59:59.000Z

109

Analog Readout and Analysis Software for the Ultra-High Rate Germanium (UHRGe) Project  

SciTech Connect (OSTI)

High-resolution high-purity germanium (HPGe) spectrometers are needed for Safeguards applications such as spent fuel assay and uranium hexafluoride cylinder verification. In addition, these spectrometers would be applicable to other high-rate applications such as non-destructive assay of nuclear materials using nuclear resonance fluorescence. Count-rate limitations of today's HPGe technologies, however, lead to concessions in their use and reduction in their efficacy. Large-volume, very high-rate HPGe spectrometers are needed to enable a new generation of nondestructive assay systems. The Ultra-High Rate Germanium (UHRGe) project is developing HPGe spectrometer systems capable of operating at unprecedented rates, 10 to 100 times those available today. This report documents current status of developments in the analog electronics and analysis software.

Fast, James E.; Aguayo Navarrete, Estanislao; Evans, Allan T.; VanDevender, Brent A.; Rodriguez, Douglas C.; Wood, Lynn S.

2011-09-01T23:59:59.000Z

110

adjust efficacy estimates: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Entropy Estimation Vincent Q. Vu Mathematics Websites Summary: -likelihood, the Good-Turing coverage estimate and the total probability of unobserved words converge at rate OP...

111

High efficacy plasma display panel with vertically raised bus electrodes  

SciTech Connect (OSTI)

The authors propose a high efficacy alternating current plasma display panel utilizing vertically raised multilayer bus electrodes. The cell structure was designed to provide an opposite discharge mode and low discharge current in a relatively long gap. The test panels having discharge gaps of 330, 350, and 370 {mu}m were fabricated and basic properties of the panel were investigated in terms of current-voltage characteristics, luminance, and luminous efficiency. The cells with proposed structure show higher luminance and lower current simultaneously. The improvement in luminous efficiency is found to be a factor of 2 compared with the conventional coplanar structure having an electrode gap of 60 {mu}m. Emission spectra and spatio-temporal distribution of infrared light in discharge were measured. It is shown that high luminous efficiency of proposed cell originates from high excitation efficiency, low surface loss of charged particles, and enlarged discharge volume.

Ok, Jung-Woo; Lee, Hae June; Kim, Dong-Hyun; Park, Chung-Hoo; Lee, Ho-Jun; Kim, Jae-Sung; Choi, Kwang-Yeol [Department of Electrical Engineering, Pusan National University, Geumjeong-gu, Busan 609-735 (Korea, Republic of); PDP R and D Department, PDP Division, LG Electronics Inc., Gumi 730-030 (Korea, Republic of); Digital Display Research Laboratory, LG Electronics Inc., Seoul 137-724 (Korea, Republic of)

2006-10-30T23:59:59.000Z

112

A Highly Efficacious Lymphocyte Chemoattractant, Stromal Cell-derived Factor 1 (SDF-1)  

E-Print Network [OSTI]

A Highly Efficacious Lymphocyte Chemoattractant, Stromal Cell-derived Factor 1 (SDF-1) By Conrad C-derived factor 1 (SDF-1). SDF-1 acts on lymphocytes and monocytes but not neutrophils in vitro and is both a highly efficacious and highly potent mononuclear cell attractant in vivo. In addition, SDF-1 induces

Springer, Timothy A.

113

The Inverted Block Rate:The Inverted Block Rate: An Alternative to Flat Rate BillingAn Alternative to Flat Rate Billing  

E-Print Network [OSTI]

The Inverted Block Rate:The Inverted Block Rate: An Alternative to Flat Rate BillingAn Alternative;Inverted Block RateInverted Block Rate 22 IntroductionIntroduction ·· Modern societies rely on electrical collectionMetering and Rate Models facilitate collection #12;Inverted Block RateInverted Block Rate 33 Rate

Hughes, Larry

114

Asymptotic Cellular Growth Rate as the Effective Information Utilization Rate  

E-Print Network [OSTI]

We study the average asymptotic growth rate of cells in randomly fluctuating environments. Using a game-theoretic perspective, we show that any response strategy has an asymptotic growth rate, which is the sum of: (i) the maximal growth rate at the worst possible distribution of environments, (ii) relative information between the actual distribution of environments to the worst one, and (iii) information utilization rate which is the information rate of the sensory devices minus the "information dissipation rate", the amount of information not utilized by the cell for growth. In non-stationary environments, the optimal strategy is the time average of the instantaneous optimal strategy and the optimal switching times are evenly spaced in the statistical (Fisher) metric.

Pugatch, Rami; Tlusty, Tsvi

2013-01-01T23:59:59.000Z

115

Measuring the Efficacy of Leaders to Assess Information and Make Decisions in a Crisis: The C-LEAD Scale  

E-Print Network [OSTI]

Based on literature and expert interviews, we developed the Crisis Leader Efficacy in Assessing and Deciding scale (C-LEAD) to capture the efficacy of leaders to assess information and make decisions in a public health and ...

Pittinsky, Todd L.

2009-07-01T23:59:59.000Z

116

Assessing the Efficacy of the Aerobic Methanotrophic Biofilter in Methane Hydrate Environments  

SciTech Connect (OSTI)

In October 2008 the University of California at Santa Barbara (UCSB) initiated investigations of water column methane oxidation in methane hydrate environments, through a project funded by the National Energy Technology Laboratory (NETL) entitled: assessing the efficacy of the aerobic methanotrophic biofilter in methane hydrate environments. This Final Report describes the scientific advances and discoveries made under this award as well as the importance of these discoveries in the broader context of the research area. Benthic microbial mats inhabit the sea floor in areas where reduced chemicals such as sulfide reach the more oxidizing water that overlies the sediment. We set out to investigate the role that methanotrophs play in such mats at locations where methane reaches the sea floor along with sulfide. Mats were sampled from several seep environments and multiple sets were grown in-situ at a hydrocarbon seep in the Santa Barbara Basin. Mats grown in-situ were returned to the laboratory and used to perform stable isotope probing experiments in which they were treated with 13C-enriched methane. The microbial community was analyzed, demonstrating that three or more microbial groups became enriched in methane?s carbon: methanotrophs that presumably utilize methane directly, methylotrophs that presumably consume methanol excreted by the methanotrophs, and sulfide oxidizers that presumably consume carbon dioxide released by the methanotrophs and methylotrophs. Methanotrophs reached high relative abundance in mats grown on methane, but other bacterial processes include sulfide oxidation appeared to dominate mats, indicating that methanotrophy is not a dominant process in sustaining these benthic mats, but rather a secondary function modulated by methane availability. Methane that escapes the sediment in the deep ocean typically dissolved into the overlying water where it is available to methanotrophic bacteria. We set out to better understand the efficacy of this process as a biofilter by studying the distribution of methane oxidation and disposition of methanotrophic populations in the Pacific Ocean. We investigated several environments including the basins offshore California, the continental margin off Central America, and the shallow waters around gas seeps. We succeeded in identifying the distributions of activity in these environments, identified potential physical and chemical controls on methanotrophic activity, we further revealed details about the methanotrophic communities active in these settings, and we developed new approaches to study methanotrophic communities. These findings should improve our capacity to predict the methanotrophic response in ocean waters, and further our ability to generate specific hypotheses as to the ecology and efficacy of pelagic methanotrophic communites. The discharge of methane and other hydrocarbons to Gulf of Mexico that followed the sinking of the Deepwater Horizon provided a unique opportunity to study the methanotorphic biofilter in the deep ocean environment. We set out to understand the consumption of methane and the bloom of methanotrophs resulting from this event, as a window into the regional scale release of gas hydrate under rapid warming scenarios. We found that other hydrocarbon gases, notably propane and ethane, were preferred for consumption over methane, but that methane consumption accelerated rapidly and drove the depletion of methane within a matter of months after initial release. These results revealed the identity of the responsible community, and point to the importance of the seed population in determining the rate at which a methanotrophic community is able to respond to an input of methane. Collectively, these results provide a significant advance in our understanding of the marine methanotrohic biofilter, and further provide direction and context for future investigations of this important phenomenon. This project has resulted in fourteen publications to date, with five more circulating in draft form, and several others planned.

Valentine, David

2012-09-30T23:59:59.000Z

117

Sustainable Building Rating Systems Summary  

SciTech Connect (OSTI)

The purpose of this document is to offer information that could be used to compare and contrast sustainable building rating systems.

Fowler, Kimberly M.; Rauch, Emily M.

2006-07-01T23:59:59.000Z

118

Strain rate sensitive constitutive equations  

E-Print Network [OSTI]

1 Computed Constants For Far'ous . Baterials 47 LIST OF FIGURFS Pace Figure I Comparison of Rate Data For Commercially Pure Aluminum Figure 2 Dynamic Loading Regimes 17 Figure 3 Yield Criteria 32 Figure 4 Uni-axial Stress-Strain Rate...

Nelson, Charles Edward

1971-01-01T23:59:59.000Z

119

RECYCLING RATE STUDY Prepared by  

E-Print Network [OSTI]

NATIONAL RECYCLING RATE STUDY Prepared by: Smith, Bucklin and Associates, Inc. Market Research and Statistics Division Chicago, Illinois July 2003 PRINTED ON RECYCLED PAPER #12;BCI RECYCLING RATE STUDY TABLE ....................................................................................................1 II. METHODOLOGY A. Total Pounds of Lead Recycled from Batteries

Laughlin, Robert B.

120

Innovative Rates Program. Final report  

SciTech Connect (OSTI)

Title II of the Energy Conservation and Production Act (ECPA) as amended by the Public Utility Regulatory Policies Act (PURPA) provided financial assistance to state utility regulatory commissions, nonregulated electric utilities, and the Tennessee Valley Authority through the Innovative Rates Program. The financial assistance was to be used to plan or carry out electric utility regulatory rate reform initiatives relating to innovative rate structures that encourage conservation of energy, electric utility efficiency and reduced costs, and equitable rates to consumers. The Federal and local objectives of the project are described. Activities planned and accomplishments are summarized for the following: project management, data collection, utility bill evaluation, billing enclosure/mailing evaluation, media program evaluation, display evaluation, rate study sessions evaluation, speakers bureau evaluation, and individual customer contacts. A timetable/milestone chart and financial information are included. (MHR)

Not Available

1982-06-21T23:59:59.000Z

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

RATES  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for1 20115, 2001 Media Contact: Rick FordMarketing

122

RATES  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for1 20115, 2001 Media Contact: Rick FordMarketing

123

RATES  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, and 323 K.Office ofMay 8, 2012IndustrialRAPIDDRATES

124

Supernova rates and stellar populations  

E-Print Network [OSTI]

We discuss the results about the nature of type Ia Supernovae that can be derived by studying their rates in different stellar populations. While the evolution of SN photometry and spectra can constrain the explosion mechanism, the SN rate depends on the progenitor system. We review the current available data on rates as a function of parent galaxy color, morphology, star formation rate, radio luminosity and environment. By studying the variation of the rates with the color of the parent galaxy, a strong evidence was established that type Ia SNe come from both young and old stars. The dependence of the rates with the radio power of the parent galaxy is best reproduced by a bimodal distribution of delay time between the formation of the progenitor and its explosion as a SN. Cluster early-type galaxies show higher type Ia SN rate with respect to field galaxies, and this effect can be due either to traces of young stars or to differences in the delay time distribution.

F. Mannucci

2007-08-03T23:59:59.000Z

125

E-Print Network 3.0 - anti-irritants ii efficacy Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

mailbox in the facultystaff mailbox area in front of the elevator at the college. Student Self-Efficacy... this form at the end of the semester for SocW 570 Field Instruction...

126

Structured communication: effects on teaching efficacy of student teachers and student teacher - cooperating teacher relationships  

E-Print Network [OSTI]

Teaching efficacy beliefs of agricultural science student teachers, and their relationship with their cooperating teachers during field experiences, are variables that may affect the number of student teachers entering the profession. The purpose...

Edgar, Don Wayne

2007-09-17T23:59:59.000Z

127

Efficacy of Misuse Detection in Adhoc Networks Dhanant Subhadrabandhu, Saswati Sarkar, and Farooq Anjum  

E-Print Network [OSTI]

1 Efficacy of Misuse Detection in Adhoc Networks Dhanant Subhadrabandhu, Saswati Sarkar, and Farooq. Subhadrabandhu and S. Sarkar are at the department of Electrical and Systems Engineering at the University

Sarkar, Saswati

128

Safety and Efficacy of Bevacizumab With Hypofractionated Stereotactic Irradiation for Recurrent Malignant Gliomas  

SciTech Connect (OSTI)

Purpose: Preclinical studies suggest that inhibition of vascular endothelial growth factor (VEGF) improves glioma response to radiotherapy. Bevacizumab, a monoclonal antibody against VEGF, has shown promise in recurrent gliomas, but the safety and efficacy of concurrent bevacizumab with brain irradiation has not been extensively studied. The objectives of this study were to determine the safety and activity of this combination in malignant gliomas. Methods and Materials: After prior treatment with standard radiation therapy patients with recurrent glioblastoma (GBM) and anaplastic gliomas (AG) received bevacizumab (10 mg/kg intravenous) every 2 weeks of 28-day cycles until tumor progression. Patients also received 30 Gy of hypofractionated stereotactic radiotherapy (HFSRT) in five fractions after the first cycle of bevacizumab. Results: Twenty-five patients (20 GBM, 5 AG; median age 56 years; median Karnofsky Performance Status 90) received a median of seven cycles of bevacizumab. One patient did not undergo HFSRT because overlap with prior radiotherapy would exceed the safe dose allowed to the optic chiasm. Three patients discontinued treatment because of Grade 3 central nervous system intratumoral hemorrhage, wound dehiscence, and bowel perforation. Other nonhematologic and hematologic toxicities were transient. No radiation necrosis was seen in these previously irradiated patients. For the GBM cohort, overall response rate was 50%, 6-month progression-free survival was 65%; median overall survival was 12.5 months, and 1-year survival was 54%. Discussion: Bevacizumab with HFSRT is safe and well tolerated. Radiographic responses, duration of disease control, and survival suggest that this regimen is active in recurrent malignant glioma.

Gutin, Philip H. [Brain Tumor Center, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Department of Neurosurgery, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Department of Neurological Surgery, Weill Medical College of Cornell University, New York, New York (United States)], E-mail: gutinp@mskcc.org; Iwamoto, Fabio M. [Brain Tumor Center, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Department of Neurology, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Beal, Kathryn [Brain Tumor Center, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Department of Radiation Oncology, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Mohile, Nimish A. [Department of Neurology, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Karimi, Sasan [Brain Tumor Center, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Department of Radiology, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Hou, Bob L. [Brain Tumor Center, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Department of Radiology, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Department of Medical Physics, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Lymberis, Stella [Department of Radiation Oncology, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Yamada, Yoshiya [Brain Tumor Center, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Department of Radiation Oncology, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Chang, Jenghwa [Department of Medical Physics, Memorial Sloan-Kettering Cancer Center, New York, New York (United States)] (and others)

2009-09-01T23:59:59.000Z

129

High repetition rate fiber lasers  

E-Print Network [OSTI]

This thesis reports work in high repetition rate femtosecond fiber lasers. Driven by the applications including optical arbitrary waveform generation, high speed optical sampling, frequency metrology, and timing and frequency ...

Chen, Jian, Ph. D. Massachusetts Institute of Technology

2009-01-01T23:59:59.000Z

130

Electric Rate Alternatives to Cogeneration  

E-Print Network [OSTI]

"ELECTRIC RATE ALTERNATIVES TO COGENERATION" K. R. SANDBERG, JR. INDUSTRIAL ACCOUNTS MANAGER - TEXAS GULF STATES UTILITIES COMPANY BEAUMONT, TEXAS ABSTRACT This paper discusses electric rate slternatives to cogeneration for the industrisl... PERSPECTIVE Gulf States Utilities was incorporated in 1925 and is primarily in the business of generating. transmitting and distributing electricity to 555.000 customers in southeast Texas and south Louisiana. The service area extends 350 miles westward...

Sandberg, K. R. Jr.

131

October 2001 - September 2006 Wholesale Power Rates (rates/previous)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002 Wholesale Power Rate Schedules (base rates) for the FY

132

October 2002 - March 2003 Power Rates (rates/previous)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002 Wholesale Power Rate Schedules (base rates) for the FY6 A2

133

October 2003 - March 2004 Power Rates (rates/previous)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002 Wholesale Power Rate Schedules (base rates) for the FY6

134

October 2004 - March 2005 Power Rates (rates/previous)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002 Wholesale Power Rate Schedules (base rates) for the FY64 -

135

October 2005 - March 2006 Power Rates (rates/previous)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002 Wholesale Power Rate Schedules (base rates) for the FY64

136

LEED for Homes Rating System affordablemarket rate multi-family  

E-Print Network [OSTI]

for Future Comfort Load Reduction 50% 60%20% 30% 40% Energy Savings Cost System Intensive Building Envelo pe;Rating System www.usgbc.org/leed/homes #12;LEED for Homes Project Checklist or Scorecard #12;LEED for Homes Project Checklist or Scorecard #12;How the Credit Structure Works Credit #2: Landscaping Intent

Zaferatos, Nicholas C.

137

Incentive Rates- At What Cost?  

E-Print Network [OSTI]

with interruptible services. Instead, I filed "ISB" which was priced slightly above the marginal fuel cost on a time of use basis. Many of the periods of the year the first year that I proposed that rate, the cost of interruptible would have been higher than... forms centers on four issues; cost scope of the topic, so let me describe what I feel based pricing, discrimination, competition between is an incentive rate. My view is likely to strike utilities, and effectiveness. You've already some of you...

Schaeffer, S. C.

138

Direct estimation of decoherence rates  

E-Print Network [OSTI]

The decoherence rate is a nonlinear channel parameter that describes quantitatively the decay of the off-diagonal elements of a density operator in the decoherence basis. We address the question of how to experimentally access such a nonlinear parameter directly without the need of complete process tomography. In particular, we design a simple experiment working with two copies of the channel, in which the registered mean value of a two-valued measurement directly determines the value of the average decoherence rate. No prior knowledge of the decoherence basis is required.

Vladimír Bužek; Peter Rapcan; Jochen Rau; Mario Ziman

2012-07-30T23:59:59.000Z

139

Fast repetition rate (FRR) flasher  

DOE Patents [OSTI]

A fast repetition rate (FRR) flasher is described suitable for high flash photolysis including kinetic chemical and biological analysis. The flasher includes a power supply, a discharge capacitor operably connected to be charged by the power supply, and a flash lamp for producing a series of flashes in response to discharge of the discharge capacitor. A triggering circuit operably connected to the flash lamp initially ionizes the flash lamp. A current switch is operably connected between the flash lamp and the discharge capacitor. The current switch has at least one insulated gate bipolar transistor for switching current that is operable to initiate a controllable discharge of the discharge capacitor through the flash lamp. Control means connected to the current switch for controlling the rate of discharge of the discharge capacitor thereby to effectively keep the flash lamp in an ionized state between successive discharges of the discharge capacitor. Advantageously, the control means is operable to discharge the discharge capacitor at a rate greater than 10,000 Hz and even up to a rate greater than about 250,000 Hz. 14 figs.

Kolber, Z.; Falkowski, P.

1997-02-11T23:59:59.000Z

140

Instability statistics and mixing rates  

E-Print Network [OSTI]

We claim that looking at probability distributions of \\emph{finite time} largest Lyapunov exponents, and more precisely studying their large deviation properties, yields an extremely powerful technique to get quantitative estimates of polynomial decay rates of time correlations and Poincar\\'e recurrences in the -quite delicate- case of dynamical systems with weak chaotic properties.

Roberto Artuso; Cesar Manchein

2009-10-20T23:59:59.000Z

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Undergraduate Kentucky Metropolitan Rate Application  

E-Print Network [OSTI]

Undergraduate Kentucky Metropolitan Rate Application REGISTRAR'S OFFICE University of Cincinnati PO@ucmail.uc.edu Undergraduate residents of specified counties in Kentucky, who are matriculated in degree or certificate requirement to establish Kentucky residency, these students are not eligible for the undergraduate

Franco, John

142

Interviewer's ratings of personality: can these ratings predict job performance?  

E-Print Network [OSTI]

; Goldberg, 1993a; Guastello, 1993; McCrae k Costa, 1985; McCrae & John, 1992) has been about the validity of the five-factor model as a measure of personality; in other words, does the model truly capture all traits of personality? The five-factor model...; Goldberg, 1981; McCrae & Costa, 1987; McCrae & John, 1992; Peabody & Goldberg, 1989). Tupes and Christal (1958, 1992) were the first to look at peer ratings of personality in a variety of samples. Although these samples varied in length and kind...

Archuleta, Kathryn Diane

2012-06-07T23:59:59.000Z

143

WP-07 Rate Case Workshops (rates/meetings)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500IIVasudhaSurface.Laboratory30,WP-07 power rates On July

144

Property:OpenEI/UtilityRate/DemandRateStructure/Tier3Rate | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms Jump to:URIInformation Rate

145

Property:OpenEI/UtilityRate/EnergyRateStructure/Tier5Rate | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscotInformation Max Jump to: navigation, search This is aInformation Rate

146

Property:OpenEI/UtilityRate/EnergyRateStructure/Tier6Rate | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscotInformation Max Jump to: navigation, search This isInformation Rate Jump

147

Upper Great Plains Rates information  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption by sectorlongUpdates by Diane Johnson Email Alerts SubscribeRates

148

Rate Adjustments and Public Involvement  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, andEpidermal Growth Factor. | EMSLusingRate

149

Previous Announcements (rates/fc)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16 FOR IMMEDIATEPreviewing the 2011 RenewableRates >

150

JOURNAL OF DISPLAY TECHNOLOGY, VOL. 3, NO. 2, JUNE 2007 155 ELiXIR--Solid-State Luminaire With Enhanced  

E-Print Network [OSTI]

with a spectrum accurately reproducing the solar spectrum [1]. The Optoelectronic Industry Develop- ment-con- verted light by the LED chip, reflectors, and encapsulation re- duces . The conventional pcLED approach

Steckl, Andrew J.

151

STATE OF CALIFORNIA CERTIFICATE OF COMPLIANCE AND FIELD INSPECTION CHECKLIST  

E-Print Network [OSTI]

Watts: 1. Type of luminaire (i.e.: post top, wall pack, surface, shoe box); for non-incandescent luminaires, indicate nominal lamp wattage and lamp type ( i.e.: fluorescent, incandescent, HID); ballast type. For incandescent luminaires, the lum

152

Collective efficacy as identified by teachers at Heritage Middle School, East Central Independent School District, San Antonio, Texas  

E-Print Network [OSTI]

the students at Heritage Middle School successful. iv The second question studied was, “What is the relationship between selected demographic variables and the perceptions of the teachers regarding collective efficacy at Heritage Middle School, East Central... Based on Ethnicity ............................................................................................. 64 10 Independent Samples t-test of the White and Hispanic Teachers From Heritage Middle School in the Perceived Collective Efficacy Survey...

Naumann, Luisa Maria

2008-10-10T23:59:59.000Z

153

OBIT DEVELOPMENT MEMO SERIES NO. 21 1 Efficacy of Obit Threading on an EVLA Dataset  

E-Print Network [OSTI]

OBIT DEVELOPMENT MEMO SERIES NO. 21 1 Efficacy of Obit Threading on an EVLA Dataset W. D. Cotton, R of the Obit wide bandwidth imager MFImage in realistic tests on an EVLA dataset including multiple iterations://www.cv.nrao.edu/bcotton/Obit.html) to do wide- band imaging of a recent EVLA dataset. This test uses multiple iterations of self

Groppi, Christopher

154

Efficacy-aware Business Process Modeling Matthias Lohrmann and Manfred Reichert  

E-Print Network [OSTI]

Efficacy-aware Business Process Modeling Matthias Lohrmann and Manfred Reichert Ulm University. In business process design, business objective models can ful- fill the role of formal requirement definitions for progressive appli- cations like automated process optimization. Key words: Business Process Modeling

Ulm, Universität

155

Comparison of the Efficacy of Popular Weight Loss Programs in Sedentary Overweight Women  

E-Print Network [OSTI]

This study compared the efficacy of the Curves® Complete 90-day Challenge (CC), Weight Watchers® Points Plus (WW), Jenny Craig® At Home (JC), and Nutrisystem® Advance Select™ (NS) on weight loss, body composition and/or markers of health and fitness...

Baetge, Claire

2014-08-06T23:59:59.000Z

156

Heat of the Moment: Characterizing the Efficacy of Thermal Camera-Based Attacks  

E-Print Network [OSTI]

Heat of the Moment: Characterizing the Efficacy of Thermal Camera-Based Attacks Keaton Mowery UC to analyze the data. First, we present code recovery re- sults from human review of our test data set lock on an industrial safe, he found that body heat from the user transferred to the individual keys

157

Efficacy of Imazapyr and Glyphosate in the Control of Non-Native Phragmites australis  

E-Print Network [OSTI]

Efficacy of Imazapyr and Glyphosate in the Control of Non-Native Phragmites australis Thomas J reed (Phragmites australis) has been expanding into previously unoccupied wetland habitats throughout, phragmites, wetlands. Introduction The common reed (Phragmites australis (Cav.) Trin. Ex Steud.) has been

McGlathery, Karen

158

Property:OpenEI/UtilityRate/DemandRateStructure/Tier1Rate | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms Jump to:URI JumpEnergyInformation Rate

159

Property:OpenEI/UtilityRate/DemandRateStructure/Tier2Rate | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms Jump to:URIInformation Rate Jump to:

160

Property:OpenEI/UtilityRate/DemandRateStructure/Tier4Rate | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms Jump to:URIInformationInformation Rate

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

7, 29612989, 2007 Predicting arene rate  

E-Print Network [OSTI]

software or computing power. Measured gas-phase rate coefficients for the reaction of aromatic hydrocarbons

Boyer, Edmond

162

Combined Retrieval, Microphysical Retrievals and Heating Rates  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Microphysical retrievals and heating rates from the AMIE/Gan deployment using the PNNL Combined Retrieval.

Feng, Zhe

163

Composite Fringe Benefit Rates Nancy R. Lewis  

E-Print Network [OSTI]

January 1, 2015 Retirement Eligible FY 2014-15 Rate FY 2015-16 Rate FY 2016-17 Rate B Healthcomp Faculty of Research #12;New Rates · Provided by the Budget Office for use when planning proposal budgets for contract and grants · Effective for use in proposals submitted to sponsors January 1, 2015 and thereafter · Title

Wood, Marcelo A.

164

Combined Retrieval, Microphysical Retrievals and Heating Rates  

SciTech Connect (OSTI)

Microphysical retrievals and heating rates from the AMIE/Gan deployment using the PNNL Combined Retrieval.

Feng, Zhe

2013-02-22T23:59:59.000Z

165

NGL Downlight Demonstration Project: Alston & Bird, LLP, Law...  

Energy Savers [EERE]

downlight luminaires were installed in residential and commercial buildings; light-emitting diode (LED) luminaires represent less than 1% of this installed base. Downlight...

166

Microsoft Word - NGL Downlight Report Alston Bird CBI FINAL 2015...  

Broader source: Energy.gov (indexed) [DOE]

downlight luminaires were installed in residential and commercial buildings; light-emitting diode (LED) luminaires represent less than 1% of this installed base. Downlight...

167

Home Energy Ratings and Building Performance  

E-Print Network [OSTI]

climate as they affect the rating score of a proposed or completed structure. The rating is used to determine the most cost effective mechanical systems, building envelope design including window and door types, effect of various roofing materials...

Gardner, J.C.

168

Smokeless Control of Flare Steam Flow Rate  

E-Print Network [OSTI]

measurement of mass flow rate of flare gas, in spite of the hostile environment. Its use for initiating control of flare steam flow rate and the addition of molecular weight compensation, using specific gravity (relative density) measurement to achieve...

Agar, J.; Balls, B. W.

1979-01-01T23:59:59.000Z

169

2012 Wholesale Power and Transmission Rate  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the meaning given such term in section 3.3.5. "COU Parties' PF Rate" means any BPA wholesale power rate for service to COUs' "general requirements" (as defined in section...

170

Kiwifruitsize influences softening rate during storage  

E-Print Network [OSTI]

fruit size and the rate of softening under air and CA conditions will help cold storage managerssafelyparts per billion induce rapid kiwifruit softening during cold storage, we investigated the rate

Crisosto, Carlos H.

171

ON THE RELATIONSHIP BETWEEN CONVERGENCE RATES OF ...  

E-Print Network [OSTI]

Q-rates in terms of the di erential properties of v and in terms of the ... schemes of this kind is to assure that they converge at a provably fast rate to a point.

172

Energy Efficiency Interest Rate Reduction Program  

Broader source: Energy.gov [DOE]

The Alaska Housing Finance Corporation (AHFC) offers interest rate reductions to home buyers purchasing new and existing homes with 5 Star and 5 Star Plus energy ratings. All homes constructed on...

173

Variable-Rate State Gasoline Taxes  

E-Print Network [OSTI]

J Bradshaw, "SLate ’F~es’ Gasoline Tax So ~t Wdl Rise," TheVarlable-Rate State Gasoline Taxers Jeffrey Ang-Olson MartinVariable-Rate State Gasoline Taxes Jeffrey Ang-Olson

Ang-Olson, Jeffrey; Wachs, Martin; Taylor, Brian D.

2000-01-01T23:59:59.000Z

174

Spontaneous Emission Rate Enhancement Using Optical Antennas  

E-Print Network [OSTI]

of  Spontaneous  Emission  in  a  Semiconductor  nanoLED,”  emission  rate  enhancement  using  the  Fluorescent  Emission  by  Lattice   Resonances  in  

Kumar, Nikhil

2013-01-01T23:59:59.000Z

175

Optimization Online - Faster convergence rates of relaxed ...  

E-Print Network [OSTI]

Jul 19, 2014 ... Faster convergence rates of relaxed Peaceman-Rachford and ADMM under regularity assumptions. Damek Davis (damek ***at*** ...

Damek Davis

2014-07-19T23:59:59.000Z

176

2007 Wholesale Power Rate Case Initial Proposal : 2007 Wholesale Power Rate Schedule and General Rate Schedule Provisions.  

SciTech Connect (OSTI)

This schedule is available for the contract purchase of Firm Power to be used within the Pacific Northwest (PNW). Priority Firm (PF) Power may be purchased by public bodies, cooperatives, and Federal agencies for resale to ultimate consumers, for direct consumption, and for Construction, Test and Start-Up, and Station Service. Rates in this schedule are in effect beginning October 1, 2006, and apply to purchases under requirements Firm Power sales contracts for a three-year period. The Slice Product is only available for public bodies and cooperatives who have signed Slice contracts for the FY 2002-2011 period. Utilities participating in the Residential Exchange Program (REP) under Section 5(c) of the Northwest Power Act may purchase Priority Firm Power pursuant to the Residential Exchange Program. Rates under contracts that contain charges that escalate based on BPA's Priority Firm Power rates shall be based on the three-year rates listed in this rate schedule in addition to applicable transmission charges. This rate schedule supersedes the PF-02 rate schedule, which went into effect October 1, 2001. Sales under the PF-07 rate schedule are subject to BPA's 2007 General Rate Schedule Provisions (2007 GRSPs). Products available under this rate schedule are defined in the 2007 GRSPs. For sales under this rate schedule, bills shall be rendered and payments due pursuant to BPA's 2007 GRSPs and billing process.

United States. Bonneville Power Administration.

2005-11-01T23:59:59.000Z

177

Influence of Agricultural Dual Credit on Student College Readiness Self-Efficacy  

E-Print Network [OSTI]

INFLUENCE OF AGRICULTURAL DUAL CREDIT ON STUDENT COLLEGE READINESS SELF-EFFICACY A Record of Study by ALANNA LEE NEELY Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements... should consider earning postsecondary degrees and credentials. The Completion Agenda states: This increased focus on college completion (not simply college access) is reflected in, for example, President Obama?s goal for the United States...

Neely, Alanna L.

2013-07-12T23:59:59.000Z

178

Strobe Light Deterrent Efficacy Test and Fish Behavior Determination at Grand Coulee Dam Third Powerplant Forebay  

SciTech Connect (OSTI)

This report documents the third year of a four-year study to assess the efficacy of a prototype strobe light system to elicit a negative phototactic response in kokanee salmon (Oncorhynchus nerka) and rainbow trout (O. mykiss) in the forebay to the third powerplant at Grand Coulee Dam. This work was conducted for the Bonneville Power Administration, U.S. Department of Energy, by Pacific Northwest National Laboratory (PNNL) in conjunction with the Confederated Tribes of the Colville Reservation (Colville Confederated Tribes).

Simmons, Mary Ann; Johnson, Robert L.; McKinstry, Craig A.; Simmons, Carver S.; Cook, Chris B.; Brown, Richard S.; Tano, Daniel K.; Thorsten, Susan L.; Faber, Derrek M.; Lecaire, Richard; Francis, Stephen

2004-01-01T23:59:59.000Z

179

AUXILIARY RATE CALCULATION The Budget Office  

E-Print Network [OSTI]

AUXILIARY RATE CALCULATION The Budget Office #12;AGENDA Guiding Principles Rate Proposal Building Office supplies for budget manager reconciliationOffice supplies for budget manager reconciliation: Equipment Compensated Leave #12;CALCULATING A RATE Budgeted Expenses Budgeted Usage BaseBudgeted Usage Base

Weston, Ken

180

West Virginia University -Main Campus Student Retention and Graduation Rates  

E-Print Network [OSTI]

West Virginia University - Main Campus Student Retention and Graduation Rates First-Time, Full ---------------------------------------------------------------------Continuation Rates and Cumulative Graduation Rates

Mohaghegh, Shahab

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Encapsulated interferon-tau during Theiler's virus-induced demyelinating disease: efficacy of treatment and immune response profile  

E-Print Network [OSTI]

significant number suffer severe negative side effects and must cease treatment. Thus, alternative therapeutics that offer less cytotoxicity and greater efficacy are a major objective of research. This dissertation evaluated a novel type I interferon...

Dean, Dana Deanna

2009-05-15T23:59:59.000Z

182

Teacher self-efficacy in Cape Town : a bottom up approach to enhancing the quality of education  

E-Print Network [OSTI]

Personal teacher self-efficacy (PTE), or the belief in one's own ability to overcome a particular challenge, often acts as a catalyst for teachers to improve the effectiveness of their teaching. Gaining PTE can translate ...

Kim, YeSeul

2011-01-01T23:59:59.000Z

183

FITCH RATES ENERGY NORTHWEST (WA) ELECTRIC REV REF BONDS 'AA...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

FITCH RATES ENERGY NORTHWEST (WA) ELECTRIC REV REF BONDS 'AA'; OUTLOOK STABLE Fitch Ratings-Austin-08 April 2015: Fitch Ratings assigns 'AA' ratings to the following Energy...

184

RTOG 0417: Efficacy of Bevacizumab in Combination With Definitive Radiation Therapy and Cisplatin Chemotherapy in Untreated Patients With Locally Advanced Cervical Carcinoma  

SciTech Connect (OSTI)

Purpose: Radiation Therapy Oncology Group 0417 was a phase II study that explored the safety and efficacy of the addition of bevacizumab to chemoradiation therapy. The safety results have been previously reported. Herein we report the secondary efficacy endpoints of overall survival (OS), locoregional failure (LRF), para-aortic nodal failure (PAF), distant failure (DF), and disease-free survival (DFS). Methods and Materials: Eligible patients with bulky Stage IB-IIIB disease were treated with once-weekly cisplatin (40 mg/m{sup 2}) chemotherapy and standard pelvic radiation therapy and brachytherapy. Bevacizumab was administered at 10 mg/kg intravenously every 2 weeks for 3 cycles during chemoradiation. For OS, failure was defined as death of any cause and was measured from study entry to date of death. LRF was defined as any failure in the pelvis. PAF was defined as any para-aortic nodal failure. DF was analyzed both including and excluding PAF. DFS was measured from study entry to date of first LRF. DF was measured with or without PAF or death. OS and DFS were estimated by the Kaplan-Meier method, and LRF and DF rates were estimated by the cumulative incidence method. Results: 49 eligible patients from 28 institutions were enrolled between 2006 and 2009. The median follow-up time was 3.8 years (range, 0.8-6.0 years). The surviving patients had a median follow-up time of 3.9 years (range, 2.1-6.0 years). Most patients had tumors of International Federation of Gynecology and Obstetrics Stage IIB (63%), and 80% were squamous. The 3-year OS, DFS, and LRF were 81.3% (95% confidence interval [CI], 67.2%-89.8%), 68.7% (95% CI, 53.5%-79.8%), and 23.2% (95% CI, 11%-35.4%), respectively. The PAF, DF without PAF, and DF with PAF at 3 years were 8.4% (95% CI, 0.4%-16.3%), 14.7% (95% CI, 4.5%-24.9%), and 23.1% (95% CI 11.0%-35.2%), respectively. Conclusion: In this study, bevacizumab in combination with standard pelvic chemoradiation therapy for locally advanced cervical cancer showed efficacy results that are promising and may warrant further investigation.

Schefter, Tracey, E-mail: tracey.schefter@ucdenver.edu [University of Colorado, Denver, Aurora, Colorado (United States); Winter, Kathryn [RTOG Statistical Center, Philadelphia, Pennsylvania (United States); Kwon, Janice S. [University of British Columbia and BC Cancer Agency, Vancouver, British Columbia (Canada); Stuhr, Kelly [University of Colorado, Denver, Aurora, Colorado (United States); Balaraj, Khalid [King Faisal Specialist Hospital and Research Centre, Riyadh (Saudi Arabia); Yaremko, Brian Patrick [Western University, London Regional Cancer Program, London, Ontario (Canada); Small, William [Loyola University Chicago Stritch School of Medicine, Chicago, Illinois (United States); Sause, William [Intermountain Medical Center, Murray, Utah (United States); Gaffney, David [University of Utah Health Sciences Center, Salt Lake City, Utah (United States)

2014-01-01T23:59:59.000Z

185

HEART RATE AS A MONITOR FOR METABOLIC RATE IN CAPTIVE JUVENILE STELLER SEA LIONS (EUMETOPIAS JUBATUS)  

E-Print Network [OSTI]

HEART RATE AS A MONITOR FOR METABOLIC RATE IN CAPTIVE JUVENILE STELLER SEA LIONS (EUMETOPIAS COLUMBIA 0Jan M. Mcl'hee, 2001 #12;ABSTRACT The potential use of heart rate to monitor energy expenditure a relationship exists between heart rate @I) and oxygen consumption ( ~ 0 ~ )in captive sea lions while swimming

186

An Examination of Harvest Rates and Brood-Take Rates as  

E-Print Network [OSTI]

An Examination of Harvest Rates and Brood-Take Rates as Management Strategies to Assist Recovery of Resource Management Project Number: 546 Title of Project: An Examination of Harvest Rates and Brood-Take Rates as Management Strategies to Assist Recovery of Cowichan River Chinook Salmon Examining Committee

187

Photovoltaic Degradation Rates -- An Analytical Review  

SciTech Connect (OSTI)

As photovoltaic penetration of the power grid increases, accurate predictions of return on investment require accurate prediction of decreased power output over time. Degradation rates must be known in order to predict power delivery. This article reviews degradation rates of flat-plate terrestrial modules and systems reported in published literature from field testing throughout the last 40 years. Nearly 2000 degradation rates, measured on individual modules or entire systems, have been assembled from the literature, showing a median value of 0.5%/year. The review consists of three parts: a brief historical outline, an analytical summary of degradation rates, and a detailed bibliography partitioned by technology.

Jordan, D. C.; Kurtz, S. R.

2012-06-01T23:59:59.000Z

188

Confronting the Graduation Rate Crisis in Texas  

E-Print Network [OSTI]

Guide to Graduation Policy and Rates, Editorial Projects inthe Graduation Crisis. Bethesda, MD: Editorial Projects inthe Graduation Crisis. Bethesda, MD: Editorial Projects in

Losen, Daniel; Orfield, Gary; Balfanz, Robert

2006-01-01T23:59:59.000Z

189

CM-1-H Wholesale Power Rate Schedule  

Broader source: Energy.gov [DOE]

Availability:This rate schedule shall be available to the South Mississippi Electric Power Association, Municipal Energy Agency of Mississippi, and Mississippi Delta Energy Agency (hereinafter...

190

Convergence Rates with Inexact Nonexpansive Operators  

E-Print Network [OSTI]

Apr 18, 2014 ... Abstract: In this paper, we present a convergence rate analysis for the inexact Krasnosel'ski{\\u{\\i}}-Mann iteration built from nonexpansive ...

Jingwei Liang

2014-04-18T23:59:59.000Z

191

Method of controlling fusion reaction rates  

DOE Patents [OSTI]

This invention relates to a method of controlling the reaction rates in a nuclear fusion reactor; and more particularly, to the use of polarized nuclear fuel.

Kulsrud, R.M.; Furth, H.P.; Valeo, E.J.; Goldhaber, M.

1983-05-09T23:59:59.000Z

192

2006 Texas High Plains Cotton Variety Ratings  

E-Print Network [OSTI]

Average Incidence of Wilt Date of Wilt Rating Earth 0.0 0.0 Sept. 8 Brownfield 5.5 1.8 Aug. 28 Petersburg

Mukhtar, Saqib

193

Home energy rating systems: Program descriptions  

SciTech Connect (OSTI)

This report contains the descriptions of home energy rating and labelling programs (HERS) that were surveyed in January 1986 as part of a national evaluation of HERS.

Vine, E.; Barnes, B.K.; Ritschard, R.

1987-02-01T23:59:59.000Z

194

Cadmium Biosorption Rate in Protonated Sargassum Biomass  

E-Print Network [OSTI]

Cadmium Biosorption Rate in Protonated Sargassum Biomass J I N B A I Y A N G A N D B O H U M I L V Sargassum fluitans biomass was accompanied by the release of hydrogen protons from the biomass. The uptake the overall biosorption rate of cadmium ions in flat seaweed biomass particles. The overall biosorption

Volesky, Bohumil

195

Foolproof completions for high rate production wells  

E-Print Network [OSTI]

gravel pack (GP) and high rate water pack (HRWP) completions over high-permeability fracturing (HPF), known in the vernacular as a frac&pack (FP) for very high rate wells. While a properly designed GP completion may prevent sand production, it does...

Tosic, Slavko

2008-10-10T23:59:59.000Z

196

Foolproof completions for high rate production wells  

E-Print Network [OSTI]

gravel pack (GP) and high rate water pack (HRWP) completions over high-permeability fracturing (HPF), known in the vernacular as a frac&pack (FP) for very high rate wells. While a properly designed GP completion may prevent sand production, it does...

Tosic, Slavko

2009-05-15T23:59:59.000Z

197

False Discovery Rates John D. Storey  

E-Print Network [OSTI]

positives. The false discovery rate is designed to quantify this type of trade-off, making it particularly Hypothesis Testing In hypothesis testing, statistical significance is typically based on calculations involving p-values and Type I error rates. A p-value calculated from a single statistical hypothesis test

Storey, John D.

198

Method of controlling fusion reaction rates  

DOE Patents [OSTI]

A method of controlling the reaction rates of the fuel atoms in a fusion reactor comprises the step of polarizing the nuclei of the fuel atoms in a particular direction relative to the plasma confining magnetic field. Fusion reaction rates can be increased or decreased, and the direction of emission of the reaction products can be controlled, depending on the choice of polarization direction.

Kulsrud, Russell M. (Princeton, NJ); Furth, Harold P. (Princeton, NJ); Valeo, Ernest J. (Princeton Junction, NJ); Goldhaber, Maurice (Bayport, NY)

1988-01-01T23:59:59.000Z

199

Theoretical cosmic Type Ia supernova rates  

E-Print Network [OSTI]

The aim of this work is the computation of the cosmic Type Ia supernova rates at very high redshifts (z>2). We adopt various progenitor models in order to predict the number of explosions in different scenarios for galaxy formation and to check whether it is possible to select the best delay time distribution model, on the basis of the available observations of Type Ia supernovae. We also computed the Type Ia supernova rate in typical elliptical galaxies of different initial luminous masses and the total amount of iron produced by Type Ia supernovae in each case. It emerges that: it is not easy to select the best delay time distribution scenario from the observational data and this is because the cosmic star formation rate dominates over the distribution function of the delay times; the monolithic collapse scenario predicts an increasing trend of the SN Ia rate at high redshifts whereas the predicted rate in the hierarchical scheme drops dramatically at high redshift; for the elliptical galaxies we note that the predicted maximum of the Type Ia supernova rate depends on the initial galactic mass. The maximum occurs earlier (at about 0.3 Gyr) in the most massive ellipticals, as a consequence of downsizing in star formation. We find that different delay time distributions predict different relations between the Type Ia supernova rate per unit mass at the present time and the color of the parent galaxies and that bluer ellipticals present higher supernova Type Ia rates at the present time.

R. Valiante; F. Matteucci; S. Recchi; F. Calura

2009-03-16T23:59:59.000Z

200

Resonances and the thermonuclear reaction rate  

E-Print Network [OSTI]

We present an approximate analytic expression for thermonuclear reaction rate of charged particles when the cross section contains a single narrow or wide resonance described by a Breit-Wigner shape. The resulting expression is uniformly valid as the effective energy and resonance energy coalesce. We use our expressions to calculate the reaction rate for $^{12}$C(p,$\\gamma$)$^{13}$N.

M. S. Hussein; M. Ueda; A. J. Sargeant; M. P. Pato

2003-07-21T23:59:59.000Z

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Atomic multipole relaxation rates near surfaces  

E-Print Network [OSTI]

The spontaneous relaxation rates for an atom in free space and close to an absorbing surface are calculated to various orders of the electromagnetic multipole expansion. The spontaneous decay rates for dipole, quadrupole and octupole transitions are calculated in terms of their respective primitive electric multipole moments and the magnetic relaxation rate is calculated for the dipole and quadrupole transitions in terms of their respective primitive magnetic multipole moments. The theory of electromagnetic field quantization in magnetoelectric materials is used to derive general expressions for the decay rates in terms of the dyadic Green function. We focus on the decay rates in free space and near an infinite half space. For the decay of atoms near to an absorbing dielectric surface we find a hierarchy of scaling laws depending on the atom-surface distance z.

J. A. Crosse; Stefan Scheel

2010-08-13T23:59:59.000Z

202

Nuclear reaction rates and the primordial nucleosynthesis  

E-Print Network [OSTI]

The theoretical predictions of the primordial abundances of elements in the big-bang nucleosynthesis (BBN) are dominated by uncertainties in the input nuclear reaction rates. We investigate the effect of modifying these reaction rates on light element abundance yields in BBN by replacing the thirty-five reaction rates out of the existing eighty-eight. We have studied these yields as functions of evolution time or temperature. We find that using these new reaction rates results in only a little increase in helium mass fraction over that obtained previously in BBN calculations. This allows insights into the role of the nuclear reaction rates in the setting of the neutron-to-proton ratio during the BBN epoch. We observe that even with considerable nuclear physics uncertainties, most of these nuclear reactions have minimal effect on the standard BBN abundance yields of $^6$Li and $^7$Li.

Abhishek Mishra; D. N. Basu

2011-11-15T23:59:59.000Z

203

THE NOVA RATE IN NGC 2403  

SciTech Connect (OSTI)

A multi-epoch H{alpha} survey of the late-type spiral galaxy NGC 2403 has been completed in order to determine its nova rate. A total of nine nova candidates were discovered in 48 nights of observation with two different telescopes over the period from 2001 February to 2012 April. After making corrections for temporal coverage and spatial completeness, a nova rate of 2.0{sup +0.5} {sub -0.3} yr{sup -1} was determined. This rate corresponds to a luminosity-specific nova rate of 2.5 {+-} 0.7 novae per year per 10{sup 10} L {sub Sun ,K}. This value is consistent with that of the similar Hubble-type galaxy, M33, and is typical of those of other galaxies with measured nova rates, which range from 1 to 3 novae per year per 10{sup 10} L {sub Sun ,K}.

Franck, J. R.; Shafter, A. W. [Department of Astronomy, San Diego State University, San Diego, CA 92182 (United States); Hornoch, K. [Astronomical Institute, Academy of Sciences, CZ-251 65 Ondrejov (Czech Republic); Misselt, K. A. [Steward Observatory, University of Arizona, Tucson, AZ 85721 (United States)

2012-11-20T23:59:59.000Z

204

Merger Rates of Dark-Matter Haloes  

E-Print Network [OSTI]

We derive analytic merger rates for dark-matter haloes within the framework of the Extended Press-Schechter (EPS) formalism. These rates become self-consistent within EPS once we realize that the typical merger in the limit of a small time-step involves more than two progenitors, contrary to the assumption of binary mergers adopted in earlier studies. We present a general method for computing merger rates that span the range of solutions permitted by the EPS conditional mass function, and focus on a specific solution that attempts to match the merger rates in N-body simulations. The corrected EPS merger rates are more accurate than the earlier estimates of Lacey & Cole, by ~20% for major mergers and by up to a factor of ~3 for minor mergers of mass ratio 1:10^4. Based on the revised merger rates, we provide a new algorithm for constructing Monte-Carlo EPS merger trees, that could be useful in Semi-Analytic Modeling. We provide analytic expressions and plot numerical results for several quantities that are very useful in studies of galaxy formation. This includes (a) the rate of mergers of a given mass ratio per given final halo, (b) the fraction of mass added by mergers to a halo, and (c) the rate of mergers per given main progenitor. The creation and destruction rates of haloes serve for a self-consistency check. Our method for computing merger rates can be applied to conditional mass functions beyond EPS, such as those obtained by the ellipsoidal collapse model or extracted from $N$-body simulations.

Eyal Neistein; Avishai Dekel

2008-05-22T23:59:59.000Z

205

Considerations for How to Rate CPV  

SciTech Connect (OSTI)

The concentrator photovoltaic (CPV) industry is introducing multiple products into the marketplace, but, as yet, the; community has not embraced a unified method for assessing a nameplate rating. The choices of whether to use 850,; 900, or 1000 W/m2 for the direct-normal irradiance and whether to link the rating to ambient or cell temperature will; affect how CPV modules are rated and compared with other technologies. This paper explores the qualitative and; quantitative ramifications of these choices using data from two multi-junction CPV modules and two flat-plate; modules.

Kurtz, S.; Miller, M.; Marion, B.; Emery, K.; McConnell, R.; Surendran, S.; Kimber, A.

2011-02-01T23:59:59.000Z

206

Measuring Degradation Rates Without Irradiance Data  

SciTech Connect (OSTI)

A method to report PV system degradation rates without using irradiance data is demonstrated. First, a set of relative degradation rates are determined by comparing daily AC final yields from a group of PV systems relative to the average final yield of all the PV systems. Then, the difference between relative and absolute degradation rates is found from a statistical analysis. This approach is verified by comparing to methods that utilize irradiance data. This approach is significant because PV systems are often deployed without irradiance sensors, so the analysis method described here may enable measurements of degradation using data that were previously thought to be unsuitable for degradation studies.

Pulver, S.; Cormode, D.; Cronin, A.; Jordan, D.; Kurtz, S.; Smith, R.

2011-02-01T23:59:59.000Z

207

2007 Wholesale Power Rate Case Initial Proposal : Section 7(b)(2) Rate Test Study.  

SciTech Connect (OSTI)

Section 7(b)(2) of the Pacific Northwest Electric Power Planning and Conservation Act (Northwest Power Act), 16 U.S.C. {section} 839e(b)(2), directs the Bonneville Power Administration (BPA) to conduct, after July 1, 1985, a comparison of the projected rates to be charged its preference and Federal agency customers for their firm power requirements, over the rate test period plus the ensuing four years, with the costs of power (hereafter called rates) to those customers for the same time period if certain assumptions are made. The effect of this rate test is to protect BPA's preference and Federal agency customers wholesale firm power rates from certain specified costs resulting from provisions of the Northwest Power Act. The rate test can result in a reallocation of costs from the general requirements loads of preference and Federal agency customers to other BPA loads. The rate test involves the projection and comparison of two sets of wholesale power rates for the general requirements loads of BPA's public body, cooperative, and Federal agency customers (7(b)(2) Customers). The two sets of rates are: (1) a set for the test period and the ensuing four years assuming that section 7(b)(2) is not in effect (known as Program Case rates); and (2) a set for the same period taking into account the five assumptions listed in section 7(b)(2), (known as 7(b)(2) Case rates). Certain specified costs allocated pursuant to section 7(g) of the Northwest Power Act are subtracted from the Program Case rates. Next, each nominal rate is discounted to the beginning of the test period of the relevant rate case. The discounted Program Case rates are averaged, as are the 7(b)(2) Case rates. Both averages are rounded to the nearest tenth of a mill for comparison. If the average Program Case rate is greater than the average 7(b)(2) Case rate, the rate test triggers. The difference between the average Program Case rate and the average 7(b)(2) Case rate determines the amount to be reallocated from the 7(b)(2) Customers to other BPA loads in the rate proposal test period.

United States. Bonneville Power Administration.

2005-11-01T23:59:59.000Z

208

2007 Wholesale Power Rate Case Final Proposal : Wholesale Power Rate Development Study.  

SciTech Connect (OSTI)

The Wholesale Power Rate Development Study (WPRDS) serves two primary purposes. It synthesizes information supplied by the other final studies that comprise the BPA rate proposal and shows the actual calculations for BPA's power rates. In addition, the WPRDS is the primary source for certain information used in establishing the power rates. Information developed in the WPRDS includes rate design (including seasonal and diurnal shapes for energy rates, demand, and load variance rates), the risk mitigation tools (Cost Recovery Adjustment Clause (CRAC), along with the [N]ational Marine Fisheries Service [F]ederal Columbia River Power System [B]iological Opinion (NFB) Adjustment, the Emergency NFB Surcharge, and Dividend Distribution Clause (DDC)), development of the Slice rate, and all discounts and other adjustments that are included in the rate schedules and the General Rate Schedule Provisions. The WPRDS also includes the description of the methodology for the Cost of Service Analysis (COSA), and the various rate design steps necessary to establish BPA's power rates. The WPRDS also shows the calculations for inter-business line revenues and expenses, the revenue forecast and, finally, includes a description of all of the rate schedules. The actual rate schedules are shown in ''Administrator's Final Record of Decision (ROD), Appendix A: 2007 Wholesale Power Rate Schedules and General Rate Schedule Provisions, WP-07-A-02''. The WPRDS also includes the Partial Resolution of Issues, shown in Attachment 1 of the ROD. The Partial Resolution of Issues affected many of the features described in this study. These are noted where appropriate.

United States. Bonneville Power Administration.

2006-07-01T23:59:59.000Z

209

State Estimation and Motion Tracking for Spatially Diverse VLC Networks M. Rahaim, G. B. Prince, T.D.C. Little  

E-Print Network [OSTI]

Handover (HHO) where traffic is transferred between VLC channels (e.g., between luminaires) or Vertical

Little, Thomas

210

Calendar Year 2009 Program Benefits for ENERGY STAR Labeled Products  

E-Print Network [OSTI]

Solid State Luminaires (SSL) • TVs/VCRs • Ventilating Fans • Water Heaters Source: ICF, 2009 • Battery

Homan, Gregory K

2011-01-01T23:59:59.000Z

211

2007 Wholesale Power Rate Case Initial Proposal : Wholesale Power Rate Development Study Documentation.  

SciTech Connect (OSTI)

The Documentation for Wholesale Power Rate Development Study (WPRDS) shows the details of the calculation of the proposed rates. It contains the source data, the calculation, and the results. Section 1 contains an overview of the information used and developed in the various models used in the rate development process. Section 2 contains the documentation of the Rate Analysis Model (RAM2007). The RAM2007 is a group of computer applications that performs most of the computations that determine BPA's proposed rates. The output tables of RAM2007 show the source data, calculations (in sequence), and the results (rate charges) of the rate development process. Section 3 provides documentation of revenue forecasts for the 3-year rate test period FY 2007 through FY 2009 at both current and proposed rates and at current rates for the period immediately preceding the rate test period. Section 4 includes supporting data for rate calculations not performed in RAM2007 or revenue analyses. Each section draws data from difference sources and thus tables and/or charts are not always numbered in sequence. For purposes of this document, omitted tables will be listed as such in the Table of Contents.

United States. Bonneville Power Administration

2005-11-01T23:59:59.000Z

212

2007 Wholesale Power Rate Case Final Proposal : Wholesale Power Rate Development Study Documentation, Volume 2.  

SciTech Connect (OSTI)

The Documentation for Wholesale Power Rate Development Study shows the details of the calculation of the proposed rates. It contains the source data, the calculation, and the results. There are 2 Volumes, the first containing Sections 1, 2, and 3; the second containing Section 4 and 3 appendices. Section 1 contains an overview of the information used and developed in the various models used in the rate development process. Section 2 contains the documentation of the Rate Analysis Model (RAM2007). The RAM2007 is a group of computer applications that performs most of the computations that determine BPA's proposed rates. The output tables of RAM2007 show the source data, calculations (in sequence), and the results (rate charges) of the rate development process. Section 3 provides documentation of revenue forecasts for the three-year rate test period FY 2007 through FY 2009 at both current and proposed rates and at current rates for the period immediately preceding the rate test period. Section 4 includes supporting data for rate calculations not performed in RAM2007 or revenue analyses.

United States. Bonneville Power Administration.

2006-07-01T23:59:59.000Z

213

Cooling rate, heating rate, and aging effects in glassy water Nicolas Giovambattista,1  

E-Print Network [OSTI]

be glassified by cooling using hyper- quenching techniques (i.e., with rates of the order of 105 K/s [8Cooling rate, heating rate, and aging effects in glassy water Nicolas Giovambattista,1 H. Eugene of water molecules during the process of generating a glass by cooling, and during the process

Sciortino, Francesco

214

Extended range radiation dose-rate monitor  

DOE Patents [OSTI]

An extended range dose-rate monitor is provided which utilizes the pulse pileup phenomenon that occurs in conventional counting systems to alter the dynamic response of the system to extend the dose-rate counting range. The current pulses from a solid-state detector generated by radiation events are amplified and shaped prior to applying the pulses to the input of a comparator. The comparator generates one logic pulse for each input pulse which exceeds the comparator reference threshold. These pulses are integrated and applied to a meter calibrated to indicate the measured dose-rate in response to the integrator output. A portion of the output signal from the integrator is fed back to vary the comparator reference threshold in proportion to the output count rate to extend the sensitive dynamic detection range by delaying the asymptotic approach of the integrator output toward full scale as measured by the meter.

Valentine, Kenneth H. (Knoxville, TN)

1988-01-01T23:59:59.000Z

215

Historical river flow rates for dose calculations  

SciTech Connect (OSTI)

Annual average river flow rates are required input to the LADTAP Computer Code for calculating offsite doses from liquid releases of radioactive materials to the Savannah River. The source of information on annual river flow rates used in dose calculations varies, depending on whether calculations are for retrospective releases or prospective releases. Examples of these types of releases are: Retrospective - releases from routine operations (annual environmental reports) and short term release incidents that have occurred. Prospective - releases that might be expected in the future from routine or abnormal operation of existing or new facilities (EIS`s, EID`S, SAR`S, etc.). This memorandum provides historical flow rates at the downstream gauging station at Highway 301 for use in retrospective dose calculations and derives flow rate data for the Beaufort-Jasper and Port Wentworth water treatment plants.

Carlton, W.H.

1991-06-10T23:59:59.000Z

216

Extratropical Lapse Rates in Very Hot Climates  

E-Print Network [OSTI]

circulation in progressively warmer climate states. As a tool to assess the stability of the atmosphere, we calculate a thermodynamic variable called saturation potential vorticity (P*), which has the property of being identically zero wherever lapse rates...

Zamora, Ryan Alexander

2013-07-02T23:59:59.000Z

217

Negotiating Rates and Contracts for Qualifying Facilities  

E-Print Network [OSTI]

The implementation of a cogeneration project or other qualifying facility (QF) requires the development of contractual relationships with one or more electric utilities. The relationships may involve the application of existing rates and contracts...

Collier, S. E.

218

PSNC Energy (Gas)- Green Building Rate Discount  

Broader source: Energy.gov [DOE]

This discounted rate is available to commercial customers whose building meets the U.S. Green Building Council’s Leadership in Energy and Environmental Design (LEED) certification or equivalent. To...

219

Dynamic Line Rating: Research and Policy Evaluation  

SciTech Connect (OSTI)

Dynamic Line Rating (DLR) is a smart grid technology that allows the rating of electrical conductors to be increased based on local weather conditions. Overhead lines are conventionally given a conservative rating based on worst case scenarios. We demonstrate that observing the conditions in real time leads to additional capacity and safer operation. This paper provides a report of a pioneering scheme in the United States of America in which DLR has been applied. Thereby, we demonstrate that observing the local weather conditions in real time leads to additional capacity and safer operation. Secondly, we discuss limitations involved. In doing so, we arrive at novel insights which will inform and improve future DLR projects. Third, we provide a policy background and discussion to clarify the technology’s potential and identifies barriers to the imminent adoption of dynamic line rating systems. We provide suggestions for regulatory bodies about possible improvements in policy to encourage adoption of this beneficial technology.

Jake P. Gentle; Kurt S. Myers; Michael R. West

2014-07-01T23:59:59.000Z

220

Data Fusion for Improved Respiration Rate Estimation  

E-Print Network [OSTI]

We present an application of a modified Kalman-Filter (KF) framework for data fusion to the estimation of respiratory rate from multiple physiological sources which is robust to background noise. A novel index of the ...

Nemati, Shamim

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Rating of Solar Energy Devices (Texas)  

Broader source: Energy.gov [DOE]

The Public Utility Commission has regulatory authority over solar energy devices installed and used in the state of Texas. The Commission can choose to adopt standards pertaining to the rating of...

222

Rainfall-induced Landslide Hazard Rating System  

E-Print Network [OSTI]

This research develops a Landslide Hazard Rating System for the rainfall-induced landslides in the Chenyulan River basin area in central Taiwan. This system is designed to provide a simplified and quick evaluation of the ...

Chen, Yi-Ting, Civ. E., Massachusetts Institute of Technology

2011-01-01T23:59:59.000Z

223

Uncertainty Analysis for Photovoltaic Degradation Rates (Poster)  

SciTech Connect (OSTI)

Dependable and predictable energy production is the key to the long-term success of the PV industry. PV systems show over the lifetime of their exposure a gradual decline that depends on many different factors such as module technology, module type, mounting configuration, climate etc. When degradation rates are determined from continuous data the statistical uncertainty is easily calculated from the regression coefficients. However, total uncertainty that includes measurement uncertainty and instrumentation drift is far more difficult to determine. A Monte Carlo simulation approach was chosen to investigate a comprehensive uncertainty analysis. The most important effect for degradation rates is to avoid instrumentation that changes over time in the field. For instance, a drifting irradiance sensor, which can be achieved through regular calibration, can lead to a substantially erroneous degradation rates. However, the accuracy of the irradiance sensor has negligible impact on degradation rate uncertainty emphasizing that precision (relative accuracy) is more important than absolute accuracy.

Jordan, D.; Kurtz, S.; Hansen, C.

2014-04-01T23:59:59.000Z

224

Rating of Mixed Split Residential Air Conditioners  

E-Print Network [OSTI]

A methodology is presented for rating the performance of mixed, split residential air conditioners. The method accounts for the impact on system performance of the indoor evaporator, expansion device and fan; three major components that are likely...

Domanski, P. A.

1988-01-01T23:59:59.000Z

225

Transition Path Sampling of Water Exchange Rates and Mechanisms...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Path Sampling of Water Exchange Rates and Mechanisms around Aqueous Ions . Transition Path Sampling of Water Exchange Rates and Mechanisms around Aqueous Ions . Abstract: The rates...

226

Contractor Rating and Feedback Systems | Department of Energy  

Energy Savers [EERE]

Contractor Rating and Feedback Systems Contractor Rating and Feedback Systems Better Buildings Residential Workforce Business Partners Peer Exchange Call Series: Contractor Rating...

227

Calibration and Rating of Photovoltaics: Preprint  

SciTech Connect (OSTI)

Rating the performance of photovoltaic (PV) modules is critical to determining the cost per watt, and efficiency is useful to assess the relative progress among PV concepts. Procedures for determining the efficiency for PV technologies from 1-sun to low concentration to high concentration are discussed. We also discuss the state of the art in primary and secondary calibration of PV reference cells used by calibration laboratories around the world. Finally, we consider challenges to rating PV technologies and areas for improvement.

Emery, K.

2012-06-01T23:59:59.000Z

228

Solar Models and NACRE thermonuclear reaction rates  

E-Print Network [OSTI]

Using the most recent updated physics, calibrated solar models have been computed with the new thermonuclear reaction rates of NACRE, the recently available European compilation. Comparisons with models computed with the reaction rates of Caughlan & Fowler (\\cite{cf88}) and of Adelberger et al. (\\cite{a98}) are made for global structure, expected neutrinos fluxes, chemical composition and sound speed profiles, helioseismological properties of p-modes and g-modes.

P. Morel; B. Pichon; J. Provost; G. Berthomieu

1999-07-27T23:59:59.000Z

229

Rate allocation in a remote control structure  

E-Print Network [OSTI]

measuzes. The quantized control problem, in general, has vector sources with weighted distortion measures. The rate allocation scheme of Goodman, must therefore be modified to allow for vector sources. Chapter 3 will specifically address the problem... of rate allocation given vector sources and weighted distortion measures' Equations will be derived for the case when the measurements and controls are assumed independent and when they are dependent. k + k P k (a) k/k-1 (b) Fig. 2. DPCM (a...

Meadow, Charles Joe

1984-01-01T23:59:59.000Z

230

Ratios of heavy hadron semileptonic decay rates  

E-Print Network [OSTI]

Ratios of charmed meson and baryon semileptonic decay rates appear to be satisfactorily described by considering only the lowest-lying (S-wave) hadronic final states and assuming the kinematic factor describing phase space suppression is the same as that for free quarks. For example, the rate for $D_s$ semileptonic decay is known to be $(17.0 \\pm 5.3)%$ lower than those for $D^0$ or $D^+$, and the model accounts for this difference. When applied to hadrons containing $b$ quarks, this method implies that the $B_s$ semileptonic decay rate is about 1% higher than that of the nonstrange $B$ mesons. This small difference thus suggests surprisingly good local quark-hadron duality for $B$ semileptonic decays, complementing the expectation based on inclusive quark-hadron duality that these differences in rates should not exceed a few tenths of a percent. For $\\Lambda_b$ semileptonic decay, however, the inclusive rate is predicted to be about 13% greater than that of the nonstrange $B$ mesons. This value, representing a considerable departure from a calculation using a heavy quark expansion, is close to the corresponding experimental ratio $\\Gamma(\\Lambda_b)/ \\bar \\Gamma(B) = 1.13 \\pm 0.03$ of total decay rates.

Michael Gronau; Jonathan L. Rosner

2010-12-27T23:59:59.000Z

231

Short GRBs: Rates and luminosity function implications  

E-Print Network [OSTI]

We compare the luminosity function and rate inferred from the BATSE short hard bursts (SHBs) peak flux distribution with the redshift and luminosity distributions of SHBs observed by Swift/HETE II. The Swift/HETE II SHB sample is incompatible with SHB population that follows the star formation rate. However, it is compatible with a distribution of delay times after the SFR. This would be the case if SHBs are associated with the mergers of double neutron star (DNS) systems. DNS may be ``primordial'' or can form dynamically by binary exchange interaction in globular clusters during core collapse. The implied SHB rates that we find range from \\sim 8 to \\sim 30h_(70)^3 Gpc^(-3)yr^(-1). This rate is a much higher than what was previously estimated and, when beaming is taken into account, it is comparable to the rate of neutron star mergers estimated from statistics of binary pulsars. If GRBs are produced in mergers the implied rate practically guarantees detection by LIGO II and possibly even by LIGO I.

Dafne Guetta

2006-10-13T23:59:59.000Z

232

2007 Wholesale Power Rate Case Final Proposal : Section 7(b)(2) Rate Test Study and Documentation.  

SciTech Connect (OSTI)

Section 7(b)(2) of the Pacific Northwest Electric Power Planning and Conservation Act (Northwest Power Act), 16 U.S.C. {section} 839e(b)(2), directs the Bonneville Power Administration (BPA) to conduct, after July 1, 1985, a comparison of the projected rates to be charged its preference and Federal agency customers for their firm power requirements, over the rate test period plus the ensuing 4 years, with the costs of power (hereafter called rates) to those customers for the same time period if certain assumptions are made. The effect of this rate test is to protect BPA's preference and Federal agency customers wholesale firm power rates from certain specified costs resulting from certain provisions of the Northwest Power Act. The rate test can result in a reallocation of costs from the general requirements loads of preference and Federal agency customers to other BPA loads. The rate test involves the projection and comparison of two sets of wholesale power rates for the general requirement loads of BPA's public body, cooperative, and Federal agency customers (collectively, the 7(b)(2) Customers). The two sets of rates are: (1) a set for the test period and the ensuing four years assuming that Section 7(b)(2) is not in effect (known as Program Case rates); and (2) a set for the same period taking into account the five assumptions listed in section 7(b)(2) (known as 7(b)(2) Case rates). Certain specified costs allocated pursuant to section 7(g) of the Northwest Power Act are subtracted from the Program Case rates. Next, each nominal rate is discounted to the beginning of the test period of the relevant rate case. The discounted Program Case rates are averaged, as are the 7(b)(2) Case rates. Both averages are rounded to the nearest tenth of a mill for comparison. If the average of the Program Case rates is greater than the average of the 7(b)(2) Case rates, the rate test triggers. The difference between the average of the Program Case rates and the average of the 7(b)(2) Case rates determines the amount to be reallocated from the 7(b)(2) Customers to other BPA loads in the rate test period. The purpose of this Study is to describe the application of the ''Section 7(b)(2) Implementation Methodology (Implementation Methodology)'' and the results of such application. The accompanying Section 7(b)(2) Rate Test Study Documentation, WP-07-FS-BPA-06A, contains the documentation of the computer models and data used to perform the 7(b)(2) rate test. This Study is organized into three major sections. The first section provides an introduction to the study, as well as a summary of the section ''7(b)(2) Legal Interpretation and Implementation Methodology''. The second section describes the methodology used in conducting the rate test. It provides a discussion of the calculations performed to project the two sets of power rates that are compared in the rate test. The third section presents a summary of the results of the rate test for the WP-07 Final Rate Proposal.

United States. Bonneville Power Administration.

2006-07-01T23:59:59.000Z

233

Phosphors for near UV-Emitting LED's for Efficacious Generation of White Light  

SciTech Connect (OSTI)

1) We studied phosphors for near-UV (nUV) LED application as an alternative to blue LEDs currently being used in SSL systems. We have shown that nUV light sources could be very efficient at high current and will have significantly less binning at both the chip and phosphor levels. We identified phosphor blends that could yield 4100K lamps with a CRI of approximately 80 and LPWnUV,opt equal to 179 for the best performing phosphor blend. Considering the fact that the lamps were not optimized for light coupling, the results are quite impressive. The main bottleneck is an optimum blue phosphor with a peak near 440 nm with a full width half maximum of about 25 nm and a quantum efficiency of >95%. Unfortunately, that may be a very difficult task when we want to excite a phosphor at ~400 nm with a very small margin for Stokes shift. Another way is to have all the phosphors in the blend having the excitation peak at 400 nm or slightly shorter wavelength. This could lead to a white light source with no body color and optimum efficacy due to no self-absorption effects by phosphors in the blend. This is even harder than finding an ideal blue phosphor, but not necessarily impossible. 2) With the phosphor blends identified, light sources using nUV LEDs at high current could be designed with comparable efficacy to those using blue LEDs. It will allow us to design light sources with multiple wattages using the same chips and phosphor blends simply by varying the input current. In the case of blue LEDs, this is not currently possible because varying the current will lower the efficacy at high current and alter the color point. With improvement of phosphor blends, control over CRI could improve. Less binning at the chip level and also at the phosphor blend level could reduce the cost of SSL light sources. 3) This study provided a deeper understanding of phosphor characteristics needed for LEDs in general and nUV LEDs in particular. Two students received Ph.D. degrees and three undergraduates participated in this work. Two of the undergraduate students are now in graduate school. The results were widely disseminated – 20 archival journal publications (published, accepted or in preparation) and three conference proceedings resulted. The students presented their work at 11 different national/international conferences (32 oral or poster presentations) and the PI’s delivered 12 invited, keynote or plenary lectures.

McKittrick, Joanna

2013-09-30T23:59:59.000Z

234

FITCH RATES PORT OF MORROW (OR) TRANSMISSION FACILITIES REV BONDS...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

FITCH RATES PORT OF MORROW (OR) TRANSMISSION FACILITIES REV BONDS 'AA'; OUTLOOK STABLE Fitch Ratings-Austin-24 November 2014: Fitch Ratings assigns 'AA' ratings to the Port of...

235

Critical reaction rates in hypersonic combustion chemistry  

SciTech Connect (OSTI)

High Mach number flight requires that the scramjet propulsion system operate at a relatively low static inlet pressure and a high inlet temperature. These two constraints can lead to extremely high temperatures in the combustor, yielding high densities of radical species and correspondingly poor chemical combustion efficiency. As the temperature drops in the nozzle expansion, recombination of these excess radicals can produce more product species, higher heat yield, and potentially more thrust. The extent to which the chemical efficiency can be enhanced in the nozzle expansion depends directly on the rate of the radical recombination reactions. A comprehensive assessment of the important chemical processes and an experimental validation of the critical rate parameters is therefore required if accurate predictions of scramjet performance are to be obtained. This report covers the identification of critical reactions, and the critical reaction rates in hypersonic combustion chemistry. 4 refs., 2 figs.

Oldenborg, R.C.; Harradine, D.M.; Loge, G.W.; Lyman, J.L.; Schott, G.L.; Winn, K.R.

1989-01-01T23:59:59.000Z

236

Relativistic QRPA calculation of muon capture rates  

E-Print Network [OSTI]

The relativistic proton-neutron quasiparticle random phase approximation (PN-RQRPA) is applied in the calculation of total muon capture rates on a large set of nuclei from $^{12}$C to $^{244}$Pu, for which experimental values are available. The microscopic theoretical framework is based on the Relativistic Hartree-Bogoliubov (RHB) model for the nuclear ground state, and transitions to excited states are calculated using the PN-RQRPA. The calculation is fully consistent, i.e., the same interactions are used both in the RHB equations that determine the quasiparticle basis, and in the matrix equations of the PN-RQRPA. The calculated capture rates are sensitive to the in-medium quenching of the axial-vector coupling constant. By reducing this constant from its free-nucleon value $g_A = 1.262$ by 10% for all multipole transitions, the calculation reproduces the experimental muon capture rates to better than 10% accuracy.

T. Marketin; N. Paar; T. Niksic; D. Vretenar

2009-03-30T23:59:59.000Z

237

Analytical Improvements in PV Degradation Rate Determination  

SciTech Connect (OSTI)

As photovoltaic (PV) penetration of the power grid increases, it becomes vital to know how decreased power output may affect cost over time. In order to predict power delivery, the decline or degradation rates must be determined accurately. For non-spectrally corrected data several complete seasonal cycles (typically 3-5 years) are required to obtain reasonably accurate degradation rates. In a rapidly evolving industry such a time span is often unacceptable and the need exists to determine degradation rates accurately in a shorter period of time. Occurrence of outliers and data shifts are two examples of analytical problems leading to greater uncertainty and therefore to longer observation times. In this paper we compare three methodologies of data analysis for robustness in the presence of outliers, data shifts and shorter measurement time periods.

Jordan, D. C.; Kurtz, S. R.

2011-02-01T23:59:59.000Z

238

A simple evaluation of global and diffuse Luminous Efficacy for all sky conditions in tropical and humid climate  

E-Print Network [OSTI]

reason that prompts us to study these luminous efficacy values is that simulation software for buildings introduced in the software enables illuminance values simulation using solar irradiance databases. Firstly obtained are used in CODYRUN 2 simulation software for predicted illuminance values in Reunion Island. 2

Boyer, Edmond

239

199USDAForestServiceGen.Tech.Rep.PSW-GTR-160.1997. Efficacy of HerbicideApplication Methods  

E-Print Network [OSTI]

version of this paper was presented at the Symposium on Oak Woodlands: Ecology,Management,andUrban199USDAForestServiceGen.Tech.Rep.PSW-GTR-160.1997. Efficacy of HerbicideApplication Methods Used tanoak (although tanoak is presently useful for fuelwood in the Santa Cruz area). Finding an effective

Standiford, Richard B.

240

The efficacy of salmon carcass analogs for enhancing stream and fish production in the Wind River watershed  

E-Print Network [OSTI]

The efficacy of salmon carcass analogs for enhancing stream and fish production in the Wind River watershed, Washington, to evaluate the effects of nutrient enhancement on measures of stream and fish production. We compared low level water chemistry, water quality, and periphyton, insect, and fish production

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Achievable Qubit Rates for Quantum Information Wires  

E-Print Network [OSTI]

Suppose Alice and Bob have access to two separated regions, respectively, of a system of electrons moving in the presence of a regular one-dimensional lattice of binding atoms. We consider the problem of communicating as much quantum information, as measured by the qubit rate, through this quantum information wire as possible. We describe a protocol whereby Alice and Bob can achieve a qubit rate for these systems which is proportional to N^(-1/3) qubits per unit time, where N is the number of lattice sites. Our protocol also functions equally in the presence of interactions modelled via the t-J and Hubbard models.

Hulya Yadsan-Appleby; Tobias J. Osborne

2011-02-15T23:59:59.000Z

242

Neutrino Event Rates from Gamma Ray Bursts  

E-Print Network [OSTI]

We recalculate the diffuse flux of high energy neutrinos produced by Gamma Ray Bursts (GRB) in the relativistic fireball model. Although we confirm that the average single burst produces only ~10^{-2} high energy neutrino events in a detector with 1 km^2 effective area, i.e. about 10 events per year, we show that the observed rate is dominated by burst-to-burst fluctuations which are very large. We find event rates that are expected to be larger by one order of magnitude, likely more, which are dominated by a few very bright bursts. This greatly simplifies their detection.

F. Halzen; D. W. Hooper

1999-10-08T23:59:59.000Z

243

What Is the Right Rate? Loan Rates and Demand | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Neighborhood Program Financing Peer Exchange Call: "What is the Right Rate?" call slides and discussion summary, December 1, 2011. Call Slides and Discussion Summary More Documents...

244

Heart Rate Variability Malvin Carl Teich  

E-Print Network [OSTI]

Heart Rate Variability Malvin Carl Teich Boston University and Columbia University http, Grasmere, UK, 2005 #12;CONGESTIVE HEART FAILURE INABILITY OF HEART TO INCREASE CARDIAC OUTPUT IN PROPORTION of breath Swelling in legs General fatigue and weakness Clinical diagnostics: Ascultate heart Carotid pulse

Teich, Malvin C.

245

Tier 2 Vintage Rate Workshop II  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

I N I S T R A T I O N Proposed Access to Market-based Vintage Rate in FY 2014 Guaranteed: Load Following customer with <1 aMW of forecast Short-Term service in FY 2014: NA Load...

246

High rate pulse processing algorithms for microcalorimeters  

SciTech Connect (OSTI)

It has been demonstrated that microcalorimeter spectrometers based on superconducting transition-edge-sensor can readily achieve sub-100 eV energy resolution near 100 keV. However, the active volume of a single microcalorimeter has to be small to maintain good energy resolution, and pulse decay times are normally in the order of milliseconds due to slow thermal relaxation. Consequently, spectrometers are typically built with an array of microcalorimeters to increase detection efficiency and count rate. Large arrays, however, require as much pulse processing as possible to be performed at the front end of the readout electronics to avoid transferring large amounts of waveform data to a host computer for processing. In this paper, they present digital filtering algorithms for processing microcalorimeter pulses in real time at high count rates. The goal for these algorithms, which are being implemented in the readout electronics that they are also currently developing, is to achieve sufficiently good energy resolution for most applications while being (a) simple enough to be implemented in the readout electronics and (b) capable of processing overlapping pulses and thus achieving much higher output count rates than the rates that existing algorithms are currently achieving. Details of these algorithms are presented, and their performance was compared to that of the 'optimal filter' that is the dominant pulse processing algorithm in the cryogenic-detector community.

Rabin, Michael [Los Alamos National Laboratory; Hoover, Andrew S [Los Alamos National Laboratory; Bacrania, Mnesh K [Los Alamos National Laboratory; Tan, Hui [XIA-LLC; Breus, Dimitry [XIA-LLC; Henning, Wolfgang [XIA-LLC; Sabourov, Konstantin [XIA-LLC; Collins, Jeff [XAI-LLC; Warburton, William K [XIA-LLC; Dorise, Bertrand [NIST; Ullom, Joel N [NIST; [NON LANL

2009-01-01T23:59:59.000Z

247

COMMODITY PRICE VOLATILITY ACROSS EXCHANGE RATE REGIMES  

E-Print Network [OSTI]

1 COMMODITY PRICE VOLATILITY ACROSS EXCHANGE RATE REGIMES John T. Cuddington* and Hong Liang** March 10, 2003 ABSTRACT This paper documents a new "stylized fact" regarding the relative price 1880 to 1996, this key relative price among two categories of tradable goods is shown to exhibit

248

Implications of Strong-Rate-Weakening Friction  

E-Print Network [OSTI]

Implications of Strong-Rate- Weakening Friction for the Length-Scale Dependence of the Strength · Rapid transitions between high static friction and very low dynamic friction · Leads to slip-pulse rupture · Slip pulses are extremely localized and have strong positive feedback between friction and slip

Greer, Julia R.

249

Heart Physiology Lab Part 1: Pulse Rate  

E-Print Network [OSTI]

Heart Physiology Lab Part 1: Pulse Rate Measure your pulse in each of the following conditions (in in the class. You may use Table 1 in the Heart Physiology Worksheet for this, if you wish. Once you have all of the class averages for each measurement. You may use Graph 1 in the Heart Physiology Worksheet for this

Loughry, Jim

250

Optimizing bit hydraulics increases penetration rate  

SciTech Connect (OSTI)

At some point, rate of penetration depends as much or more on hydraulics as on bit weight and rotary speed. An easy-to-follow graphical technique shows how to maximize ROP at the rig by finding the optimum pressure drop through the bit and the highest possible crossflow velocity.

Robinson, L.

1982-07-01T23:59:59.000Z

251

High temperature electrochemical corrosion rate probes  

SciTech Connect (OSTI)

Corrosion occurs in the high temperature sections of energy production plants due to a number of factors: ash deposition, coal composition, thermal gradients, and low NOx conditions, among others. Electrochemical corrosion rate (ECR) probes have been shown to operate in high temperature gaseous environments that are similar to those found in fossil fuel combustors. ECR probes are rarely used in energy production plants at the present time, but if they were more fully understood, corrosion could become a process variable at the control of plant operators. Research is being conducted to understand the nature of these probes. Factors being considered are values selected for the Stern-Geary constant, the effect of internal corrosion, and the presence of conductive corrosion scales and ash deposits. The nature of ECR probes will be explored in a number of different atmospheres and with different electrolytes (ash and corrosion product). Corrosion rates measured using an electrochemical multi-technique capabilities instrument will be compared to those measured using the linear polarization resistance (LPR) technique. In future experiments, electrochemical corrosion rates will be compared to penetration corrosion rates determined using optical profilometry measurements.

Bullard, Sophie J.; Covino, Bernard S., Jr.; Holcomb, Gordon R.; Ziomek-Moroz, M.

2005-09-01T23:59:59.000Z

252

Prediction of Thermonuclear Reaction Rates in Astrophysics  

E-Print Network [OSTI]

Recent improvements and remaining problems in the prediction of thermonuclear rates are reviewed. The main emphasis is on statistical model calculations, but the challenge to include direct reactions close to the driplines is also briefly addressed. Further theoretical as well as experimental investigations are motivated.

T. Rauscher

1998-10-15T23:59:59.000Z

253

Electric germs Source: scenta Rate this item  

E-Print Network [OSTI]

Electric germs Source: scenta Rate this item People in remote areas could benefit from fuel cells that contain bacteria that grows prolifically on the graphite anodes of fuel cells and can conduct electricity that isolating a bacterium generated pow er in fuel cells efficiently. Geobacter sulfurreducens is bacteria

Lovley, Derek

254

Improving energy efficiency via probabilistic rate combination in 802.11 multi-rate wireless networks  

E-Print Network [OSTI]

transmission. An alternative way to conserve energy is to apply power control [1­4]. A wireless node is allowedImproving energy efficiency via probabilistic rate combination in 802.11 multi-rate wireless in revised form 20 January 2009 Accepted 27 January 2009 Available online 6 February 2009 Keywords: Energy

Lui, John C.S.

255

Muon capture rates within the projected QRPA  

E-Print Network [OSTI]

The conservation of the number of particles within the QRPA plays an important role in the evaluation muon capture rates in all light nuclei with A \\precsim 30 . The violation of the CVC by the Coulomb field in this mass region is of minor importance, but this effect could be quite relevant for medium and heavy nuclei studied previously. The extreme sensitivity of the muon capture rates on the 'pp' coupling strength in nuclei with large neutron excess when described within the QRPA is pointed out. We reckon that the comparison between theory and data for the inclusive muon capture is not a fully satisfactory test on the nuclear model that is used. The exclusive muon transitions are much more robust for such a purpose.

Danilo Sande Santos; Arturo R. Samana; Francisco Krmpoti?; Alejandro J. Dimarco

2012-03-03T23:59:59.000Z

256

Thermal dilepton rates from quenched lattice QCD  

E-Print Network [OSTI]

We present new lattice results on the continuum extrapolation of the vector current correlation function. Lattice calculations have been carried out in the deconfined phase at a temperature of 1.1 Tc, extending our previous results at 1.45 Tc, utilizing quenched non-perturbatively clover-improved Wilson fermions and light quark masses. A systematic analysis on multiple lattice spacings allows to perform the continuum limit of the correlation function and to extract spectral properties in the continuum limit. Our current analysis suggests the results for the electrical conductivity are proportional to the temperature and the thermal dilepton rates in the quark gluon plasma are comparable for both temperatures. Preliminary results of the continuum extrapolated correlation function at finite momenta, which relates to thermal photon rates, are also presented.

H. -T. Ding; A. Francis; O. Kaczmarek; F. Karsch; E. Laermann; S. Mukherjee; M. Müller; W. Soeldner

2013-01-30T23:59:59.000Z

257

IN-SERVICE LOAD & RESISTANCE FACTOR RATING METHOD FOR BRIDGES  

E-Print Network [OSTI]

Stress Rating method (noted ASR in the following), Load Factor Rating method (noted LFR in the followingIN-SERVICE LOAD & RESISTANCE FACTOR RATING METHOD FOR BRIDGES Degang Li1 , Baidurya Bhattacharya2 are evaluated using allowable stress and load factor rating methods. Load rating made in these traditional

Bhattacharya, Baidurya

258

UK now claims world's top discovery rate  

SciTech Connect (OSTI)

UK explorers are a bit more cheerful these days even though no one has discovered a giant field or anything elephant-sized. The reason is a benign tax regime and a growing confidence among industry explorers. This last has resulted in discovery of many smaller fields - particularly gas, some potentially commercial. It is claimed that the UK's discovery rate is now the highest in the world.

Not Available

1985-05-01T23:59:59.000Z

259

Energy loss rate in disordered quantum well  

SciTech Connect (OSTI)

We report the effect of dynamically screened deformation potential on the electron energy loss rate in disordered semiconductor quantum well. Interaction of confined electrons with bulk acoustic phonons has been considered in the deformation coupling. The study concludes that the dynamically screened deformation potential coupling plays a significant role as it substantially affects the power dependency of electron relaxation on temperature and mean free path.

Tripathi, P.; Ashraf, S. S. Z. [Centre of Excellence in Nanomaterials, Faculty of Engineering and Technology, Aligarh Muslim University, Aligarh-202002 (India); Hasan, S. T. [Physics Department, Faculty of Science, The M.S. University of Baroda, Vadodara-390002 (India); Sharma, A. C. [Physics Department, Sibli National College, Azamgarh-276128 (India)

2014-04-24T23:59:59.000Z

260

Subsurface heaters with low sulfidation rates  

DOE Patents [OSTI]

A system for heating a hydrocarbon containing formation includes a heater having an elongated ferromagnetic metal heater section. The heater is located in an opening in a formation. The heater section is configured to heat the hydrocarbon containing formation. The exposed ferromagnetic metal has a sulfidation rate that goes down with increasing temperature of the heater, when the heater is in a selected temperature range.

John, Randy Carl; Vinegar, Harold J

2013-12-10T23:59:59.000Z

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Intraclass Price Elasticity & Electric Rate Design  

E-Print Network [OSTI]

INTRACLASS PRICE ELASTICITY &ELECTRIC RATE DESIGN KEVIN E. GRESHAM Senior Research Analyst Houston Lighting & Power Company Houston, Texas ABSTRACT PRICE ELASTICITY Electric ~ate design relies on cost incur rance for pricing and pricing... industries are already affecting electric utilities. Cogeneration is one example of competition which effects electric utilities. Utilities now have a competing source of generation which often causes load and revenue losses. Competition has specifically...

Gresham, K. E.

262

Decoherence rates for Galilean covariant dynamics  

E-Print Network [OSTI]

We introduce a measure of decoherence for a class of density operators. For Gaussian density operators in dimension one it coincides with an index used by Morikawa (1990). Spatial decoherence rates are derived for three large classes of the Galilean covariant quantum semigroups introduced by Holevo. We also characterize the relaxation to a Gaussian state for these dynamics and give a theorem for the convergence of the Wigner function to the probability distribution of the classical analog of the process.

Jeremy Clark

2008-04-02T23:59:59.000Z

263

STELLAR ENCOUNTER RATE IN GALACTIC GLOBULAR CLUSTERS  

SciTech Connect (OSTI)

The high stellar densities in the cores of globular clusters cause significant stellar interactions. These stellar interactions can produce close binary mass-transferring systems involving compact objects and their progeny, such as X-ray binaries and radio millisecond pulsars. Comparing the numbers of these systems and interaction rates in different clusters drives our understanding of how cluster parameters affect the production of close binaries. In this paper we estimate stellar encounter rates ({Gamma}) for 124 Galactic globular clusters based on observational data as opposed to the methods previously employed, which assumed 'King-model' profiles for all clusters. By deprojecting cluster surface brightness profiles to estimate luminosity density profiles, we treat 'King-model' and 'core-collapsed' clusters in the same way. In addition, we use Monte Carlo simulations to investigate the effects of uncertainties in various observational parameters (distance, reddening, surface brightness) on {Gamma}, producing the first catalog of globular cluster stellar encounter rates with estimated errors. Comparing our results with published observations of likely products of stellar interactions (numbers of X-ray binaries, numbers of radio millisecond pulsars, and {gamma}-ray luminosity) we find both clear correlations and some differences with published results.

Bahramian, Arash; Heinke, Craig O.; Sivakoff, Gregory R.; Gladstone, Jeanette C., E-mail: bahramia@ualberta.ca [Department of Physics, University of Alberta, CCIS 4-183, Edmonton, AB, T5K 1V4 (Canada)

2013-04-01T23:59:59.000Z

264

Heating Rate Profiles in Galaxy Clusters  

E-Print Network [OSTI]

In recent years evidence has accumulated suggesting that the gas in galaxy clusters is heated by non-gravitational processes. Here we calculate the heating rates required to maintain a physically motived mass flow rate, in a sample of seven galaxy clusters. We employ the spectroscopic mass deposition rates as an observational input along with temperature and density data for each cluster. On energetic grounds we find that thermal conduction could provide the necessary heating for A2199, Perseus, A1795 and A478. However, the suppression factor, of the clasical Spitzer value, is a different function of radius for each cluster. Based on the observations of plasma bubbles we also calculate the duty cycles for each AGN, in the absence of thermal conduction, which can provide the required energy input. With the exception of Hydra-A it appears that each of the other AGNs in our sample require duty cycles of roughly $10^{6}-10^{7}$ yrs to provide their steady-state heating requirements. If these duty cycles are unrealistic, this may imply that many galaxy clusters must be heated by very powerful Hydra-A type events interspersed between more frequent smaller-scale outbursts. The suppression factors for the thermal conductivity required for combined heating by AGN and thermal conduction are generally acceptable. However, these suppression factors still require `fine-tuning` of the thermal conductivity as a function of radius. As a consequence of this work we present the AGN duty cycle as a cooling flow diagnostic.

Edward C. D. Pope; Georgi Pavlovski; Christian R. Kaiser; Hans Fangohr

2006-01-05T23:59:59.000Z

265

2007 Wholesale Power Rate Case Initial Proposal : Wholesale Power Rate Development Study.  

SciTech Connect (OSTI)

The Wholesale Power Rate Development Study (WPRDS) calculates BPA proposed rates based on information either developed in the WPRDS or supplied by the other studies that comprise the BPA rate proposal. All of these studies, and accompanying documentation, provide the details of computations and assumptions. In general, information about loads and resources is provided by the Load Resource Study (LRS), WP-07-E-BPA-01, and the LRS Documentation, WP-07-E-BPA-01A. Revenue requirements information, as well as the Planned Net Revenues for Risk (PNNR), is provided in the Revenue Requirement Study, WP-07-E-BPA-02, and its accompanying Revenue Requirement Study Documentation, WP-07-E-BPA-02A and WP-07-E-BPA-02B. The Market Price Forecast Study (MPFS), WP-07-E-BPA-03, and the MPFS Documentation, WP-07-E-BPA-03A, provide the WPRDS with information regarding seasonal and diurnal differentiation of energy rates, as well information regarding monthly market prices for Demand Rates. In addition, this study provides information for the pricing of unbundled power products. The Risk Analysis Study, WP-07-E-BPA-04, and the Risk Analysis Study Documentation, WP-07-E-BPA-04A, provide short-term balancing purchases as well as secondary energy sales and revenue. The Section 7(b)(2) Rate Test Study, WP-07-E-BPA-06, and the Section 7(b)(2) Rate Test Study Documentation, WP-07-E-BPA-06A, implement Section 7(b)(2) of the Northwest Power Act to ensure that BPA preference customers firm power rates applied to their general requirements are no higher than rates calculated using specific assumptions in the Northwest Power Act.

United States. Bonneville Power Administration.

2007-11-01T23:59:59.000Z

266

NFC Academic Access and Equipment Rates valid 7/1/13 to 6/30/14 RATES SUBJECT TO CHANGE  

E-Print Network [OSTI]

NFC Academic Access and Equipment Rates valid 7/1/13 to 6/30/14 RATES SUBJECT TO CHANGE ACCESS/USE UNITS RATE ACCESS FEE monthly fee $29.20 LAB USAGE FEE per lab session $24.44 LAB USAGE MAX PER MONTH per month $224.72 EQUIPMENT INCLUDED EQUIPMENT UNITS RATE 50% Rate Reduction After 500 min

Amin, S. Massoud

267

Santee-3-E Wholesale Power Rate Schedule | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Santee-3-E Wholesale Power Rate Schedule Santee-3-E Wholesale Power Rate Schedule Area: None System: Georgia-Alabama-South Carolina This rate schedule shall be available to public...

268

GTA TRIP GENERATION RATES, 1986 -1996 Eric J. Miller  

E-Print Network [OSTI]

GTA TRIP GENERATION RATES, 1986 - 1996 by Eric J. Miller Department of Civil Engineering University . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. CHANGES IN GTA TRIP GENERATION RATES, 1986-96 . . . . . . . . . . . . . . . . . . . . . 2 2 Time Female Labour Force Participation Rate

Toronto, University of

269

Integrated System Transmission and Ancillary Services Rate Calculation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Transmission Rate 10 4.14 MillsKWh (L5 * 1000) 730 hours per month 7 RATE FOR SCHEDULING, SYSTEM CONTROL AND DISPATCH SERVICE FOR 2014 A. Fixed Charge Rate 22.770% (1)...

270

Integrated System Transmission and Ancillary Services Rate Calculation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Transmission Rate 10 4.00 MillsKWh (L5 * 1000) 730 hours per month 7 RATE FOR SCHEDULING, SYSTEM CONTROL AND DISPATCH SERVICE FOR 2015 A. Fixed Charge Rate 21.652% (1)...

271

Uncertainty analysis of multi-rate kinetics of uranium desorption...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Uncertainty analysis of multi-rate kinetics of uranium desorption from sediments. Uncertainty analysis of multi-rate kinetics of uranium desorption from sediments. Abstract: A...

272

Auto/Steel Partnership: AHSS Stamping, Strain Rate Characterization...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AHSS Stamping, Strain Rate Characterization, Sheet Steel Fatigue, AHSS Joining AutoSteel Partnership: AHSS Stamping, Strain Rate Characterization, Sheet Steel Fatigue, AHSS...

273

Trends in Contractor Conversion Rates | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Contractor Conversion Rates Trends in Contractor Conversion Rates Better Buildings Residential Network Workforce Business Partners Peer Exchange Call Series: Trends in Contractor...

274

Burning Modes and Oxidation Rates of Soot: Relevance to Diesel...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Burning Modes and Oxidation Rates of Soot: Relevance to Diesel Particulate Traps Burning Modes and Oxidation Rates of Soot: Relevance to Diesel Particulate Traps Presentation given...

275

High Catalytic Rates for Hydrogen Production Using Nickel Electrocatal...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

High Catalytic Rates for Hydrogen Production Using Nickel Electrocatalysts with Seven-Membered Diphosphine Ligands Containing High Catalytic Rates for Hydrogen Production Using...

276

Fact #659: January 24, 2011 Fuel Economy Ratings for Vehicles...  

Energy Savers [EERE]

9: January 24, 2011 Fuel Economy Ratings for Vehicles Operating on Electricity Fact 659: January 24, 2011 Fuel Economy Ratings for Vehicles Operating on Electricity The...

277

Workshop on Thermonuclear Reaction Rates for Astrophysics Applications  

E-Print Network [OSTI]

Workshop on Thermonuclear Reaction Rates for Astrophysics Applications 24-25 November 2011, Athensrd and final circular for the Workshop on Thermonuclear Reaction Rates for Astrophysics Applications

278

Control Strategies for Centrifugal Pumps with Variable Flow Rate...  

Broader source: Energy.gov (indexed) [DOE]

Control Strategies for Centrifugal Pumps with Variable Flow Rate Requirements Control Strategies for Centrifugal Pumps with Variable Flow Rate Requirements This tip sheet discusses...

279

Fair rate assignment in interference limited multi-hop networks  

E-Print Network [OSTI]

Optimal Link Scheduling and Power Control in CDMA MultihopB. Shro?. , “Joint rate control and scheduling in multihopthe joint rate control and scheduling problem, and [26

Arisoylu, Mustafa

2006-01-01T23:59:59.000Z

280

The Potential Benefits of Distributed Generation and the Rate...  

Broader source: Energy.gov (indexed) [DOE]

The Potential Benefits of Distributed Generation and the Rate-Related Issues That May Impede Its Expansion The Potential Benefits of Distributed Generation and the Rate-Related...

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Blazar Flaring Rates Measured with GLAST  

E-Print Network [OSTI]

We derive the minimum observing time scales to detect a blazar at a given flux level with the LAT on GLAST in the scanning and pointing modes. Based upon Phase 1 observations with EGRET, we predict the GLAST detection rate of blazar flares at different flux levels. With some uncertainty given the poor statistics of bright blazars, we predict that a blazar flare with integral flux >~ 200e-8 ph(> 100 MeV) cm^{-2} s^{-1}, which are the best candidates for Target of Opportunity pointings and extensive temporal and spectral studies, should occur every few days.

Dermer, C D

2004-01-01T23:59:59.000Z

282

Binary Capture Rates for Massive Protostars  

E-Print Network [OSTI]

The high multiplicity of massive stars in dense, young clusters is established early in their evolution. The mechanism behind this remains unresolved. Recent results suggest that massive protostars may capture companions through disk interactions with much higher efficiency than their solar mass counterparts. However, this conclusion is based on analytic determinations of capture rates and estimates of the robustness of the resulting binaries. We present the results of coupled n-body and SPH simulations of star-disk encounters to further test the idea that disk-captured binaries contribute to the observed multiplicity of massive stars.

Nickolas Moeckel; John Bally

2007-04-09T23:59:59.000Z

283

Reverse Engineering of Proteasomal Translocation Rates  

E-Print Network [OSTI]

We address the problem of proteasomal protein translocation and introduce a new stochastic model of the proteasomal digestion (cleavage) of proteins. In this model we account for the protein translocation and the positioning of cleavage sites of a proteasome from first principles. We show by test examples and by processing experimental data that our model allows reconstruction of the translocation and cleavage rates from mass spectroscopy data on digestion patterns and can be used to investigate the properties of transport in different experimental set-ups. Detailed investigation with this model will enable theoretical quantitative prediction of the proteasomal activity.

D. S. Goldobin; M. Mishto; K. Textoris-Taube; P. M. Kloetzel; A. Zaikin

2008-07-28T23:59:59.000Z

284

Blazar Flaring Rates Measured with GLAST  

E-Print Network [OSTI]

We derive the minimum observing time scales to detect a blazar at a given flux level with the LAT on GLAST in the scanning and pointing modes. Based upon Phase 1 observations with EGRET, we predict the GLAST detection rate of blazar flares at different flux levels. With some uncertainty given the poor statistics of bright blazars, we predict that a blazar flare with integral flux >~ 200e-8 ph(> 100 MeV) cm^{-2} s^{-1}, which are the best candidates for Target of Opportunity pointings and extensive temporal and spectral studies, should occur every few days.

C. D. Dermer; B. L. Dingus

2003-12-22T23:59:59.000Z

285

Utility Rates | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpenWende NewSowitec do BrasilGmbH Jump to:Rates Home Ewilson's

286

Tunneling decay rate in quantum cosmology  

E-Print Network [OSTI]

In canonical quantum cosmology, the wave function of the universe lacks explicit time dependence. However, time evolution may be present implicitly through the semiclassical superspace variables, which themselves depend on time in classical dynamics. In this paper, we apply this approach to an oscillating universe model recently introduced by Graham et al. By extending the model to include a massless, minimally coupled scalar field $\\phi$ which has little effect on the dynamics but can play the role of a "clock", we determine the decay rate of the oscillating universe.

Mithani, Audrey T

2015-01-01T23:59:59.000Z

287

Tunneling decay rate in quantum cosmology  

E-Print Network [OSTI]

In canonical quantum cosmology, the wave function of the universe lacks explicit time dependence. However, time evolution may be present implicitly through the semiclassical superspace variables, which themselves depend on time in classical dynamics. In this paper, we apply this approach to an oscillating universe model recently introduced by Graham et al. By extending the model to include a massless, minimally coupled scalar field $\\phi$ which has little effect on the dynamics but can play the role of a "clock", we determine the decay rate of the oscillating universe.

Audrey T. Mithani; Alexander Vilenkin

2015-03-02T23:59:59.000Z

288

Wholesale Power Rate Schedules | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun DengWISP SignInWho do I contact atRate

289

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111Jumpand PowerUtility Rate Home

290

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111Jumpand PowerUtility Rate

291

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRate Home >

292

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRate Home

293

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRate Homeclean

294

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRate HomecleanEIA

295

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRate

296

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRateEZFeed Type

297

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRateEZFeed

298

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRateEZFeedUtility

299

gas rates | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place:ReferenceEditWisconsin:YBR SolarZe-gen JumpZincZoomZougas rates

300

BPA Power Rates (pbl/main)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone6 M. Babzien, I. Ben-Zvi, P. Study of SmartRates Announcements

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,Save Energy NowNew Hampshire AddressGRRUtility Rate Home >

302

Property:HeatRate | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County, Maine:PlugNumberOfArraProjectTypeTopic2GrossGen JumpRating Jump

303

Power Function Review (pbl/rates)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home Design PassivePostdoctoral Opportunities Are you YourRates >

304

2007 Wholesale Power Rate Case Initial Proposal : Direct Testimony.  

SciTech Connect (OSTI)

The purpose of our testimony is to sponsor the rate design portions of Bonneville Power Administration's (BPA) Wholesale Power Rate Development Study (WPRDS), WP-07-E-BPA-05, and associated portions of the Wholesale Power Rate Schedules and GRSPs (WP-07-E-BPA-07). Our testimony is organized in eight sections. The first section outlines the purpose of our testimony. Section 2 describes BPA's Demand Rates, including subsections on the definition of the Demand Rate, the method for computing the Demand Rates, and differences from the currently effective WP-02 Demand Rate. Section 3 describes BPA's Load Variance Rate, with subsections on the definition and purpose of the Load Variance Rate, application of the Load Variance Rate, how the Load Variance Rate is calculated, and the differences from the WP-02 Load Variance Rate. Section 4 describes the steps involved in developing BPA's energy rates and differences from the WP-02 rate case. Section 5 discusses discontinuation of the Stepped Up Multi-Year Block Rate. Section 6 describes a minor change to the Unauthorized Increase Rates and the Excess Factoring Rates. Section 7 describes the Targeted Adjustment Charge. Section 8 addresses the Operating Reserves Credit.

United States. Bonneville Power Administration.

2005-11-01T23:59:59.000Z

305

On the Annihilation Rate of WIMPs  

E-Print Network [OSTI]

We develop a formalism that allows one to systematically calculate the WIMP annihilation rate into gamma rays whose energy far exceeds the weak scale. A factorization theorem is presented which separates the radiative corrections stemming from initial state potential interactions from loops involving the final state. This separation allows us to go beyond the fixed order calculation, which is polluted by large infrared logarithms. For the case of Majorana WIMPs transforming in the adjoint representation of SU(2), we present the result for the resummed rate at leading double log accuracy in terms of two initial state partial wave matrix elements and one hard matching coefficient. For a given model, one may calculate the cross section by calculating the tree level matching coefficient and determining the value of a local four fermion operator. We find that the effects of resummation can be as large as 100% for a 20 TeV WIMP. The generalization of the formalism to other types of WIMPs is discussed.

Matthew Baumgart; Ira Z. Rothstein; Varun Vaidya

2014-10-29T23:59:59.000Z

306

An Empirical Comparison between the NEO-FFI and the WPI and the Relationship between Self-Efficacy and Workplace Personality  

E-Print Network [OSTI]

satisfaction, with self-esteem and generalized self-efficacy contributing the most. Judge and Bono (2001) point out that Conscientiousness is often thought of as the ?primary dispositional predictor of job performance? (p. 85). They were able to show...

Orozco, Lauren Michel

2011-02-22T23:59:59.000Z

307

Efficacy of Lower-Body Shielding in Computed Tomography Fluoroscopy-Guided Interventions  

SciTech Connect (OSTI)

Purpose: Computed tomography (CT) fluoroscopy-guided interventions pose relevant radiation exposure to the interventionalist. The goal of this study was to analyze the efficacy of lower-body shielding as a simple structural method for decreasing radiation dose to the interventionalist without limiting access to the patient. Material and Methods: All examinations were performed with a 128-slice dual source CT scanner (12 Multiplication-Sign 1.2-mm collimation; 120 kV; and 20, 40, 60, and 80 mAs) and an Alderson-Rando phantom. Scatter radiation was measured with an ionization chamber and a digital dosimeter at standardized positions and heights with and without a lower-body lead shield (0.5-mm lead equivalent; Kenex, Harlow, UK). Dose decreases were computed for the different points of measurement. Results: On average, lower-body shielding decreased scatter radiation by 38.2% within a 150-cm radius around the shielding. This decrease is most significant close to the gantry opening and at low heights of 50 and 100 cm above the floor with a maximum decrease of scatter radiation of 95.9% close to the scanner's isocentre. With increasing distance to the gantry opening, the effect decreased. There is almost no dose decrease effect at {>=}150 above the floor. Scatter radiation and its decrease were linearly correlated with the tube current-time product (r{sup 2} = 0.99), whereas percent scatter radiation decrease was independent of the tube current-time product. Conclusion: Lower-body shielding is an effective way to decrease radiation exposure to the interventionalist and should routinely be used in CT fluoroscopy-guided interventions.

Mahnken, Andreas H., E-mail: mahnken@rad.rwth-aachen.de [RWTH Aachen, Department of Diagnostic and Interventional Radiology (Germany); Sedlmair, Martin [Siemens, Healthcare Sector (Germany); Ritter, Christine [University of Copenhagen, Niels Bohr Institute (Denmark); Banckwitz, Rosemarie; Flohr, Thomas [Siemens, Healthcare Sector (Germany)

2012-12-15T23:59:59.000Z

308

Reverse-Engineering Banks' Financial Strength Ratings Using ...  

E-Print Network [OSTI]

Dec 27, 2006 ... reverse-engineering a superior bank rating system, which turns out to ...... sector (

mal92

2009-05-16T23:59:59.000Z

309

Workshop on Thermonuclear Reaction Rates for Astrophysics Applications  

E-Print Network [OSTI]

Workshop on Thermonuclear Reaction Rates for Astrophysics Applications 24-25 November 2011, Athens circular for the Workshop on Thermonuclear Reaction Rates for Astrophysics Applications, to be held of thermonuclear reaction rates. The topics of the workshop, in relation with thermonuclear reaction rates

310

Implementation of home energy rating systems  

SciTech Connect (OSTI)

This paper presents the findings of a national survey of home energy rating and labelling programs (HERS). We discuss the nature of different implementation problems and the kinds of strategies that have been used to deal with them to ensure the effective penetration of HERS to all HERS-users. Of further special interest to us has been the nature of different delivery systems. We examined 34 HERS, located in 28 states: 13 of these were located in the southeast, 8 in the midwest, 5 in the northeast, 4 in the Pacific/mountain region, and 3 in the southwest. Although our survey does not represent a scientific sampling of HERS, we believe that the final distribution accurately reflects the distribution of HERS through the country and the full range of likely implementation and delivery programs.

Vine, E.; Barnes, B.K.; Ritschard, R.

1987-02-01T23:59:59.000Z

311

Bioremediation of oil-contaminated soil -- A rate model  

SciTech Connect (OSTI)

Three rate equations, a modified Monod equation and two mass transfer rate equations, were used to calculate the biodegradation rate, oxygen transfer rate and oil transfer rate during a bioremediation process of oil-contaminated soil. Based on experimental rate constants, these three rates were calculated and compared. It was found the bioremediation rate of oil-contaminated soil could be controlled by the mass transfer process of oil into aqueous solution (0.12 mg BOD/(1-h)). When the oil transfer rate is enhanced by at least 10 times, the oxygen transfer process (0.1--1.0 mg BOD/(1-h)) becomes the rate-controlling step. For most of the cases, the biodegradation of oil in aqueous solution is not the limiting step unless the microbial population in the aqueous solution is less than 100 mg VSS/1.

Li, K.Y.; Zhang, Y.; Xu, T. [Lamar Univ., Beaumont, TX (United States). Chemical Engineering Dept.] [Lamar Univ., Beaumont, TX (United States). Chemical Engineering Dept.

1995-12-31T23:59:59.000Z

312

Rates for Color Shifted Microlensing Events  

E-Print Network [OSTI]

If the objects responsible for gravitational microlensing (ML) of Galactic-bulge stars are faint dwarfs, then blended light from the lens will distort the shape of the ML light curve and shift the color of the observed star during the event. The resolution in current surveys is not accurate enough to observe this effect, but it should be detected with frequent and precise followup observations. We calculate the expected rates for ML events where the shape distortions will be observable by such followup observations, assuming that the lenses are ordinary main-sequence stars in a bar and in the disk. We study the dependence of the rates for color-shifted (CS) events on the frequency of followup observations and on the precision of the photometry for a variety of waveband pairings. We find that for hourly observations in $B$ and $K$ with typical photometric errors of 0.01 mag, 28\\% of the events where a main-sequence bulge star is lensed, and 7\\% of the events where the source is a bulge giant, will give rise to a measurable CS at the 95\\% confidence level. For observations in $V$ and $I$, the fractions become 18\\% and 5\\%, respectively, but may be increased to 40\\% and 13\\% by improved photometric accuracy and increased sampling frequency. We outline how the mass, distance, and transverse speed of the lens can be obtained, giving examples of typical errors. We discuss how CS events can be distinguished from events where the source is blended with a binary companion.

Ari Buchalter; Marc Kamionkowski; R. Michael Rich

1995-11-08T23:59:59.000Z

313

In-cell reaction rate distributions and cell-average reaction rates in fast critical assemblies  

SciTech Connect (OSTI)

Measurements are described for determining average values of fission rates in /sup 235/U, /sup 238/U and /sup 239/Pu and capture rates in /sup 238/U for heterogeneous cells used to construct fast critical assemblies. The measurements are based on irradiations of foils of /sup 238/U, /sup 235/U and /sup 239/Pu with counting of fission and capture products using gamma-ray spectroscopy. Both plate and pin cells are considered. Procedures are described for inferring cell-average reaction rate values from a single foil location based on a cell using a quantity called a cell factor. Cell factors are determined from special measurements in which several foils are irradiated within a cell. Comparisons are presented between cell factors determined by measurements and by Monte Carlo calculations which lend credibility to the measurement procedures.

Brumbach, S.B.; Gasidlo, J.M.

1985-08-01T23:59:59.000Z

314

NFC Industrial Access and Equipment Rates valid 7/1/13 to 6/30/14 RATES SUBJECT TO CHANGE  

E-Print Network [OSTI]

NFC Industrial Access and Equipment Rates valid 7/1/13 to 6/30/14 RATES SUBJECT TO CHANGE ACCESS/USE UNITS RATE ACCESS FEE monthly fee $91.00 LAB USAGE FEE per lab session $67.50 LAB USAGE MAX PER MONTH per month $631.00 EQUIPMENT INCLUDED EQUIPMENT UNITS RATE ALDATOMIC LAYER DEP ALD Savannah 200 minute

Amin, S. Massoud

315

The Efficacy of Ultraviolet Radiation for Sterilizing Tools Used for Surgically Implanting Transmitters into Fish  

SciTech Connect (OSTI)

Telemetry is frequently used to examine the behavior of fish, and the transmitters used are normally surgically implanted into the coelom of fish. Implantation requires the use of surgical tools such as scalpels, forceps, needle holders, and sutures. When several fish are implanted consecutively for large telemetry studies, it is common for surgical tools to be sterilized or, at minimum, disinfected between each use so that pathogens that may be present are not spread among fish. However, autoclaving tools can take a long period of time, and chemical sterilants or disinfectants can be harmful to both humans and fish and have varied effectiveness. Ultraviolet (UV) radiation is commonly used to disinfect water in aquaculture facilities. However, this technology has not been widely used to sterilize tools for surgical implantation of transmitters in fish. To determine its efficacy for this application, Pacific Northwest National Laboratory researchers used UV radiation to disinfect surgical tools (i.e., forceps, needle holder, stab scalpel, and suture) that were exposed to one of four aquatic organisms that typically lead to negative health issues for salmonids. These organisms included Aeromonas salmonicida, Flavobacterium psychrophilum, Renibacterium salmoninarum, and Saprolegnia parasitica. Surgical tools were exposed to the bacteria by dipping them into a confluent suspension of three varying concentrations (i.e., low, medium, high). After exposure to the bacterial culture, tools were placed into a mobile Millipore UV sterilization apparatus. The tools were then exposed for three different time periods—2, 5, or 15 min. S. parasitica, a water mold, was tested using an agar plate method and forceps-pinch method. UV light exposures of 5 and 15 min were effective at killing all four organisms. UV light was also effective at killing Geobacillus stearothermophilus, the organism used as a biological indicator to verify effectiveness of steam sterilizers. These techniques appear to provide a quick alternative disinfection technique for some surgical tools that is less harmful to both humans and fish while not producing chemical waste. However, we do not recommend using these methods with tools that have overlapping parts or other structures that cannot be directly exposed to UV light such as needle holders.

Walker, Ricardo W.; Markillie, Lye Meng; Colotelo, Alison HA; Gay, Marybeth E.; Woodley, Christa M.; Brown, Richard S.

2013-02-28T23:59:59.000Z

316

A New Series of Rate Decline Relations Based on the Diagnosis of Rate-Time Data  

E-Print Network [OSTI]

functional for the b-parameter. The next step of this procedure is to test and validate each of the rate decline relations by applying them to various numerical simulation cases (for gas), as well as for field data cases obtained from tight/shale gas...

Boulis, Anastasios

2010-01-14T23:59:59.000Z

317

DOE CALiPER Program, Report 21.2: Linear (T8) LED Lamp Performance in Five Types of Recessed Troffers  

SciTech Connect (OSTI)

Although lensed troffers are numerous, there are many other types of optical systems as well. This report looked at the performance of three linear (T8) LED lamps chosen primarily based on their luminous intensity distributions (narrow, medium, and wide beam angles) as well as a benchmark fluorescent lamp in five different troffer types. Also included are the results of a subjective evaluation. Results show that linear (T8) LED lamps can improve luminaire efficiency in K12-lensed and parabolic-louvered troffers, effect little change in volumetric and high-performance diffuse-lensed type luminaires, but reduce efficiency in recessed indirect troffers. These changes can be accompanied by visual appearance and visual comfort consequences, especially when LED lamps with clear lenses and narrow distributions are installed. Linear (T8) LED lamps with diffuse apertures exhibited wider beam angles, performed more similarly to fluorescent lamps, and received better ratings from observers. Guidance is provided on which luminaires are the best candidates for retrofitting with linear (T8) LED lamps.

Miller, Naomi J.; Perrin, Tess E.; Royer, Michael P.; Wilkerson, Andrea M.; Beeson, Tracy A.

2014-05-20T23:59:59.000Z

318

ANALYTICAL STAR FORMATION RATE FROM GRAVOTURBULENT FRAGMENTATION  

SciTech Connect (OSTI)

We present an analytical determination of the star formation rate (SFR) in molecular clouds, based on a time-dependent extension of our analytical theory of the stellar initial mass function. The theory yields SFRs in good agreement with observations, suggesting that turbulence is the dominant, initial process responsible for star formation. In contrast to previous SFR theories, the present one does not invoke an ad hoc density threshold for star formation; instead, the SFR continuously increases with gas density, naturally yielding two different characteristic regimes, thus two different slopes in the SFR versus gas density relationship, in agreement with observational determinations. Besides the complete SFR derivation, we also provide a simplified expression, which reproduces the complete calculations reasonably well and can easily be used for quick determinations of SFRs in cloud environments. A key property at the heart of both our complete and simplified theory is that the SFR involves a density-dependent dynamical time, characteristic of each collapsing (prestellar) overdense region in the cloud, instead of one single mean or critical freefall timescale. Unfortunately, the SFR also depends on some ill-determined parameters, such as the core-to-star mass conversion efficiency and the crossing timescale. Although we provide estimates for these parameters, their uncertainty hampers a precise quantitative determination of the SFR, within less than a factor of a few.

Hennebelle, Patrick [Laboratoire de Radioastronomie, UMR CNRS 8112, Ecole Normale Superieure et Observatoire de Paris, 24 rue Lhomond, 75231 Paris Cedex 05 (France); Chabrier, Gilles [Ecole Normale Superieure de Lyon, CRAL, UMR CNRS 5574, 69364 Lyon Cedex 07 (France)

2011-12-20T23:59:59.000Z

319

Solids flow rate measurement in dense slurries  

SciTech Connect (OSTI)

Accurate and rapid flow rate measurement of solids in dense slurries remains an unsolved technical problem, with important industrial applications in chemical processing plants and long-distance solids conveyance. In a hostile two-phase medium, such a measurement calls for two independent parameter determinations, both by non-intrusive means. Typically, dense slurries tend to flow in laminar, non-Newtonian mode, eliminating most conventional means that usually rely on calibration (which becomes more difficult and costly for high pressure and temperature media). These issues are reviewed, and specific solutions are recommended in this report. Detailed calculations that lead to improved measuring device designs are presented for both bulk density and average velocity measurements. Cross-correlation, chosen here for the latter task, has long been too inaccurate for practical applications. The cause and the cure of this deficiency are discussed using theory-supported modeling. Fluid Mechanics are used to develop the velocity profiles of laminar non-Newtonian flow in a rectangular duct. This geometry uniquely allows the design of highly accurate `capacitive` devices and also lends itself to gamma transmission densitometry on an absolute basis. An absolute readout, though of less accuracy, is also available from a capacitive densitometer and a pair of capacitive sensors yields signals suitable for cross-correlation velocity measurement.

Porges, K.G.; Doss, E.D.

1993-09-01T23:59:59.000Z

320

Controls for Solid-State Lighting  

SciTech Connect (OSTI)

This study predicts new hybrid lighting applications for LEDs. In hybrid lighting, LEDs provide a low-energy 'standby' light level while another, more powerful, efficient light source provides light for occupied periods. Lighting controls will allow the two light sources to work together through an appropriate control strategy, typically motion-sensing. There are no technical barriers preventing the use of low through high CRI LEDs for standby lighting in many interior and exterior applications today. The total luminous efficacy of LED systems could be raised by increasing the electrical efficiency of LED drivers to the maximum practically achievable level (94%). This would increase system luminous efficacy by 20-25%. The expected market volumes for many types of LEDs should justify the evolution of new LED drivers that use highly efficient ICs and reduce parts count by means of ASICs. Reducing their electronics parts count by offloading discrete components onto integrated circuits (IC) will allow manufacturers to reduce the cost of LED driver electronics. LED luminaire manufacturers will increasingly integrate the LED driver and thermal management directly in the LED fixture. LED luminaires of the future will likely have no need for separable lamp and ballast because the equipment life of all the LED luminaire components will all be about the same (50,000 hours). The controls and communications techniques used for communicating with conventional light sources, such as dimmable fluorescent lighting, are appropriate for LED illumination for energy management purposes. DALI has been used to control LED systems in new applications and the emerging ZigBee protocol could be used for LEDs as well. Major lighting companies are already moving in this direction. The most significant finding is that there is a significant opportunity to use LEDs today for standby lighting purposes. Conventional lighting systems can be made more efficient still by using LEDs to provide a low-energy standby state when lower light levels are acceptable.

Rubinstein, Francis

2007-06-22T23:59:59.000Z

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Minimizing Variation in Outdoor CPV Power Ratings: Preprint  

SciTech Connect (OSTI)

The CPV community has agreed to have both indoor and outdoor power ratings at the module level. The indoor rating provides a repeatable measure of module performance as it leaves the factory line while the outdoor rating provides a measure of true performance under real world conditions. The challenge with an outdoor rating is that the spectrum, temperature, wind speed, etc are constantly in flux and therefore the resulting power rating varies from day to day and month to month. This work examines different methodologies for determining the outdoor power rating with the goal of minimizing variation even if data are collected under changing meteorological conditions.

Muller, M.; Marion, B.; Rodriguez, J.; Kurtz, S.

2011-07-01T23:59:59.000Z

322

Quantifying factors determining the rate of CTL escape and reversion during acute and chronic phases of HIV infection  

SciTech Connect (OSTI)

Human immunodeficiency virus (HIV) often evades cytotoxic T cell (CTL) responses by generating variants that are not recognized by CTLs. However, the importance and quantitative details of CTL escape in humans are poorly understood. In part, this is because most studies looking at escape of HIV from CTL responses are cross-sectional and are limited to early or chronic phases of the infection. We use a novel technique of single genome amplification (SGA) to identify longitudinal changes in the transmitted/founder virus from the establishment of infection to the viral set point at 1 year after the infection. We find that HIV escapes from virus-specific CTL responses as early as 30-50 days since the infection, and the rates of viral escapes during acute phase of the infection are much higher than was estimated in previous studies. However, even though with time virus acquires additional escape mutations, these late mutations accumulate at a slower rate. A poor correlation between the rate of CTL escape in a particular epitope and the magnitude of the epitope-specific CTL response suggests that the lower rate of late escapes is unlikely due to a low efficacy of the HIV-specific CTL responses in the chronic phase of the infection. Instead, our results suggest that late and slow escapes are likely to arise because of high fitness cost to the viral replication associated with such CTL escapes. Targeting epitopes in which virus escapes slowly or does not escape at all by CTL responses may, therefore, be a promising direction for the development of T cell based HIV vaccines.

Ganusov, Vitaly V [Los Alamos National Laboratory; Korber, Bette M [Los Alamos National Laboratory; Perelson, Alan S [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

323

act transportation rate: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

rates are calculated and compared. The ortho- isomer has a very small rate of transport. 1999 Ferreira, Mrcia M. C. 89 2008 James L. Oberstar Forum on Transportation Policy...

324

Enhancing the Lithiation Rate of Silicon Nanowires by the Inclusion...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Enhancing the Lithiation Rate of Silicon Nanowires by the Inclusion of Tin. Enhancing the Lithiation Rate of Silicon Nanowires by the Inclusion of Tin. Abstract: Silicon (Si) has a...

325

Essays on Real Exchange Rates and Theoretical Monetary Aggregation  

E-Print Network [OSTI]

This dissertation is a collection of three essays focused on real exchange rates and theoretical monetary aggregation. The first essay focused on the convergence of real exchange rates' idiosyncratic effects after isolating ...

Zheng, Mingming

2014-05-31T23:59:59.000Z

326

Big changes in liquidity - how they affect power rates  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

lot of help from its customers, BPA was able to reduce its FY 2007-2009 power rates from those in the prior rate period while still meeting its fi nancial standards and legal...

327

Deforestation in Brazilian Amazonia: History, Rates, and Consequences  

E-Print Network [OSTI]

Deforestation in Brazilian Amazonia: History, Rates, and Consequences PHILIP M. FEARNSIDE Instituto of deforestation began with the inauguration of the Transamazon Highway in 1970. Amazonian deforestation rates have that make deforestation profitable. Forest degradation results from logging, ground fires (facilitated

Gottgens, Hans

328

Utility Rate Design Revision - A Frisbee Full of Boomerangs  

E-Print Network [OSTI]

Rising electricity prices have prompted investigation of utility rates and proposals for changed in their design. The purpose of this paper is to discuss the current design of electric rates, changes proposed, actual trends, and predictable results...

Dannenmaier, J. H.

1979-01-01T23:59:59.000Z

329

Microsoft Word - News Release -- Rates Initial Proposal Dec ...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

utilities, the Bonneville Power Administration today proposed a 6.7 percent average wholesale power rate increase for the fiscal year 2016-2017 rate period. BPA is also proposing...

330

From: Sent: Subject: Attachments: SNR-Rates, SNR  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

SNR - Rates From: Sent: Subject: Attachments: SNR-Rates, SNR Friday, August 22, 2014 3:03 PM 2015 Initial Power Restoration Fund Obligation FY 2015 Initial Restoration Fund Letter...

331

Inflation targeting in emerging countries: the exchange rate issues  

E-Print Network [OSTI]

The current discussion of Inflation Targeting (IT) in emerging economies deals with the effects that nominal exchange rate movements have on the overall inflation rate. The literature has focused in the analysis of the advantages and disadvantages...

Reyes Altamirano, Javier Arturo

2004-09-30T23:59:59.000Z

332

Rangeland Drought Management for Texans: Stocking Rate and Grazing Management  

E-Print Network [OSTI]

This publication explains how stocking rates and grazing management decisions can help a ranch survive a drought. To deal with drought, a rancher must monitor forage supply and demand; use a conservative stocking rate and keep it flexible...

Hart, Charles R.; Carpenter, Bruce B.

2001-05-03T23:59:59.000Z

333

Cost of Service and Rate Design Issues Affecting Industrial Customers in Retail Rate Proceedings  

E-Print Network [OSTI]

alternative is not selected, or when the selected capacity expansion plan results in excess generation. A reduction in invested capital will reduce the system revenue requirements. The rate of return is equal to the sum of the weighted cost of debt plus... the position that the cost of all or part of an imprudent management decision should be borne by the stockholder. Prudency issues are usually raised when the cost of new generation units are excessive, when the most economic generation expansion...

Stover, C. N. Jr.

334

Flow Rate Estimates Qs and As Q: What is the Flow Rate Technical Group?  

E-Print Network [OSTI]

to the BP oil spill in the Gulf of Mexico be stepped up as a result of the new flow rate estimates released their initial estimate. · The first approach analyzed how much oil is on the surface of the Gulf of Mexico using,000 and 270,000 barrels of oil are on the surface of the Gulf of Mexico and that a similar amount had already

Fleskes, Joe

335

Property:OpenEI/UtilityRate/EnergyRateStructure/Tier6Sell | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscotInformation Max Jump to: navigation, search This isInformation Rate

336

Rate Control Management of Atrial Fibrillation: May a Mathematical Model Suggest an Ideal Heart Rate?  

E-Print Network [OSTI]

Background. Despite the routine prescription of rate control therapy for atrial fibrillation (AF), clinical evidence demonstrating a heart rate target is lacking. Aim of the present study was to run a mathematical model simulating AF episodes with a different heart rate (HR) to predict hemodynamic parameters for each situation. Methods. The lumped model, representing the pumping heart together with systemic and pulmonary circuits, was run to simulate AF with HR of 50, 70, 90, 110 and 130 bpm, respectively. Results. Left ventricular pressure increased by 56.7%, from 33.92+-37.56 mmHg to 53.15+-47.56 mmHg, and mean systemic arterial pressure increased by 27.4%, from 82.66+-14.04 mmHg to 105.29+-7.63 mmHg, at the 50 and 130 bpm simulations, respectively. Stroke volume (from 77.45+-8.5 to 39.09+-8.08 mL), ejection fraction (from 61.1+-4.4 to 39.32+-5.42%) and stroke work (SW, from 0.88+-0.04 to 0.58+-0.09 J) decreased by 49.5, 35.6 and 34.2%, at the 50 and 130 bpm simulations, respectively. In addition, oxygen co...

Anselmino, Matteo; Camporeale, Carlo; Saglietto, Andrea; Gaita, Fiorenzo; Ridolfi, Luca

2015-01-01T23:59:59.000Z

337

Minimizing Variation in Outdoor CPV Power Ratings (Presentation)  

SciTech Connect (OSTI)

Module data from NREL's CPV test bed is used to examine methods for calculating outdoor CPV power ratings. IEC 62670 and ASTM E2527 are used as a starting point for determining a module power rating on a monthly basis. Monthly power ratings vary by more than desired using existing methods. The presentation examines modifications to existing methods as well as spectral corrections to reduce variation in monthly module power ratings.

Muller, M.

2011-02-01T23:59:59.000Z

338

HEART RATE VARIABILITY AS DETERMINISM WITH JUMP STOCHASTIC PARAMETERS  

E-Print Network [OSTI]

HEART RATE VARIABILITY AS DETERMINISM WITH JUMP STOCHASTIC PARAMETERS JIONGXUAN ZHENG, JOE SKUFCA, AND ERIK BOLLT§ Abstract. We use measured heart rate information (RR intervals) to develop a one with persistence which causes the heart rate and rhythm system to wander about a bifurcation point. We propose

Bollt, Erik

339

Heart Rate Dynamics Before Spontaneous Onset of Ventricular  

E-Print Network [OSTI]

Heart Rate Dynamics Before Spontaneous Onset of Ventricular Fibrillation in Patients With Healed V. Huikuri, MD The traditional methods of analyzing heart rate (HR) variability have failed myocardial infarction has been shown to be in- creased in patients with reduced heart rate (HR) vari- ability

340

Modeling of strain rate effects on clay in simple shear  

E-Print Network [OSTI]

strength and log scale of strain rate. To include the effects of strain rate, the modified simple effective stress model starts with two assumptions: (1) a specific shear strength corresponds to a specific strain rate in a unique relation; and (2...

Jung, Byoung Chan

2006-08-16T23:59:59.000Z

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

EIS-0093: Bonneville Power Administration's 1982 Rate Proposal  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy's Bonneville Power Administration prepared this statement to evaluate the potential environmental impacts associated with an increase in wholesale power rates for calendar year 1982, including the effects of rate hikes in that year, the cumulative effects of rate hikes from 1979-1985, as well as alternative revenue scenarios.

342

EIS-0102: Bonneville Power Administration's 1983 Wholesale Power Rate  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy's Bonneville Power Administration prepared this EIS to evaluate the potential environmental impacts associated with an increase in wholesale power rates that would become effective on November 1, 1983, including the effects of rate hikes in that year and the cumulative effects of previous rate hikes.

343

An Evolutionary Reduction Principle for Mutation Rates at Multiple Loci  

E-Print Network [OSTI]

An Evolutionary Reduction Principle for Mutation Rates at Multiple Loci Lee Altenberg altenber of the reduction principle is found: reduction results at individual loci combine topologically to produce to the reduction principle, and under fine tuning of mutation rates would be expected to have higher mutation rates

Altenberg, Lee

344

EXPLAINING OUTCROSSING RATE IN CAMPANULASTRUM AMERICANUM (CAMPANULACEAE): GEITONOGAMY  

E-Print Network [OSTI]

SELF-INCOMPATIBILITY Leah J. Kruszewski and Laura F. Galloway1 Department of Biology, University, the high outcrossing rate could result from cryptic self-incompatibility, a mechanism that favors outcross differential growth rates of self and outcross pollen tubes produce cryptic self-incompatibility. Growth rates

Galloway, Laura F.

345

Chukwuemeka I. Okoye Carbon Dioxide Solubility and Absorption Rate in  

E-Print Network [OSTI]

Copyright by Chukwuemeka I. Okoye 2005 #12;Carbon Dioxide Solubility and Absorption Rate _______________________ Nicholas A. Peppas #12;Carbon Dioxide Solubility and Absorption Rate in Monoethanolamine/Piperazine/H2O for. #12;iii Carbon Dioxide Solubility and Absorption Rate in Monoethanolamine/Piperazine/H2O

Rochelle, Gary T.

346

Strategic Rate Design: The Role of Industrial Tariffs  

E-Print Network [OSTI]

utilities have as a primary objective the goal of setting rates that fully reflect costs. Even within this constraint, alternative pricing mechanisms are available to allow the utility to engage in strategic rate design. For example, time-of-use rates... to the same MW made up of several smaller-sized units, the larger-sized contracts are charged at a higher rate. The rate for the energy charge depends on time of use and a liberal tilt of the capacity costs into the energy charge provides the customer a...

Rosenblum, J. I.; House, R.

347

Optimization of well rates under gas coning conditions  

E-Print Network [OSTI]

production rates under gas caning conditions. This new method applies to an oil reservoir overlain by a large gas cap containing multiple wells. The cases consider have a limit on the maximum field production rate for both oil and gas. It was found... that the optimal p~ion rates are achieved when Eq. 1 is satisfied for any pair of wells i and j: ) I = constant i = 1, . . . , n dqo This condition minimizes the f ield gas production rate when the maximum field production rate for oil is met, and maximizes...

Urbanczyk, Christopher Henry

1989-01-01T23:59:59.000Z

348

HIgh Rate X-ray Fluorescence Detector  

SciTech Connect (OSTI)

The purpose of this project was to develop a compact, modular multi-channel x-ray detector with integrated electronics. This detector, based upon emerging silicon drift detector (SDD) technology, will be capable of high data rate operation superior to the current state of the art offered by high purity germanium (HPGe) detectors, without the need for liquid nitrogen. In addition, by integrating the processing electronics inside the detector housing, the detector performance will be much less affected by the typically noisy electrical environment of a synchrotron hutch, and will also be much more compact than current systems, which can include a detector involving a large LN2 dewar and multiple racks of electronics. The combined detector/processor system is designed to match or exceed the performance and features of currently available detector systems, at a lower cost and with more ease of use due to the small size of the detector. In addition, the detector system is designed to be modular, so a small system might just have one detector module, while a larger system can have many â?? you can start with one detector module, and add more as needs grow and budget allows. The modular nature also serves to simplify repair. In large part, we were successful in achieving our goals. We did develop a very high performance, large area multi-channel SDD detector, packaged with all associated electronics, which is easy to use and requires minimal external support (a simple power supply module and a closed-loop water cooling system). However, we did fall short of some of our stated goals. We had intended to base the detector on modular, large-area detectors from Ketek GmbH in Munich, Germany; however, these were not available in a suitable time frame for this project, so we worked instead with pnDetector GmbH (also located in Munich). They were able to provide a front-end detector module with six 100 m^2 SDD detectors (two monolithic arrays of three elements each) along with associated preamplifiers; these detectors surpassed the performance we expected to get from the Ketek detectors, however they are housed in a sealed module, which does not offer the ease of repair and expandability weâ??d hoped to achieve with the Ketek SDDâ??s. Our packaging efforts were quite successful, as we came up with a very compact way to mount the detector and to house the associated electronics, as well as a very effective way to reliably take out the heat (from the electronics as well as the detectorâ??s Peltier coolers) without risk of condensation and without external airflow or vibration, which could create problems for the target applications. While we were able to design compact processing electronics that fit into the detector assembly, they are still at the prototype stage, and would require a significant redesign to achieve product status. We have not yet tested this detector at a synchrotron facility; we do still plan on working with some close contacts at the nearby Stanford Synchrotron Radiation Laboratory (SSRL) to get some testing with the beam (using existing commercial electronics for readout, as the integrated processor is not ready for use).

Grudberg, Peter Matthew [XIA LLC

2013-04-30T23:59:59.000Z

349

Compensated count-rate circuit for radiation survey meter  

DOE Patents [OSTI]

A count-rate compensating circuit is provided which may be used in a portable Geiger-Mueller (G-M) survey meter to ideally compensate for counting loss errors in the G-M tube detector. In a G-M survey meter, wherein the pulse rate from the G-M tube is converted into a pulse rate current applied to a current meter calibrated to indicate dose rate, the compensated circuit generates and controls a reference voltage in response to the rate of pulses from the detector. This reference voltage is gated to the current-generating circuit at a rate identical to the rate of pulses coming from the detector so that the current flowing through the meter is varied in accordance with both the frequency and amplitude of the reference voltage pulses applied thereto so that the count rate is compensated ideally to indicate a true count rate within 1% up to a 50% duty cycle for the detector. A positive feedback circuit is used to control the reference voltage so that the meter output tracks true count rate indicative of the radiation dose rate.

Todd, Richard A. (Powell, TN)

1981-01-01T23:59:59.000Z

350

Compensated count-rate circuit for radiation survey meter  

DOE Patents [OSTI]

A count-rate compensating circuit is provided which may be used in a portable Geiger-Mueller (G-M) survey meter to ideally compensate for couting loss errors in the G-M tube detector. In a G-M survey meter, wherein the pulse rate from the G-M tube is converted into a pulse rate current applied to a current meter calibrated to indicate dose rate, the compensation circuit generates and controls a reference voltage in response to the rate of pulses from the detector. This reference voltage is gated to the current-generating circuit at a rate identical to the rate of pulses coming from the detector so that the current flowing through the meter is varied in accordance with both the frequency and amplitude of the reference voltage pulses applied thereto so that the count rate is compensated ideally to indicate a true count rate within 1% up to a 50% duty cycle for the detector. A positive feedback circuit is used to control the reference voltage so that the meter output tracks true count rate indicative of the radiation dose rate.

Todd, R.A.

1980-05-12T23:59:59.000Z

351

WP-96/TR-96 & TC-96 Power and Transmission Rate Case (rates/ratecases)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500IIVasudhaSurface.Laboratory30,WP-07 power rates On

352

Property:OpenEI/UtilityRate/DemandRateStructure/Tier3Adjustment | Open  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms Jump to:URIInformation Rate Jump to:Energy

353

Property:OpenEI/UtilityRate/DemandRateStructure/Tier3Max | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms Jump to:URIInformation Rate Jump

354

Property:OpenEI/UtilityRate/DemandRateStructure/Tier4Adjustment | Open  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms Jump to:URIInformation RateEnergy

355

Efficient White SSL Component for General Illumination  

SciTech Connect (OSTI)

Cree has developed a new, high-efficiency, low-cost, light emitting diode (LED) module that should be capable of replacing standard, halogen, fluorescent and metal halide lamps based on the total cost of ownership. White LEDs are produced by combining one or more saturated color LEDs with a phosphor or other light down-converting media to achieve white broad-band illumination. This two year project addressed LED chip, package and phosphor efficiency improvements to establish a technology platform suitable for low-cost, high-efficiency commercial luminaires. New phosphor materials with improved quantum efficiency at 'real-life' operating conditions were developed along with new package technology to improve the efficiency of warm white LED modules compared to the baseline technology. Specifically, Cree has successfully demonstrated warm white LED modules providing 540 lumens at a correlated color temperature (CCT) of 3000 K. The LED module had an efficacy of 102.8 lumens per watt (LPW) using 1 mm2 chips biased at 350 mA - a 27% improvement over the technology at project start (81 LPW at 3000K). The white modules also delivered an efficacy of 88 LPW at elevated junction temperatures of 125 C. In addition, a proof-of-concept 4-inch downlight luminaire produced a flux of 1183 lumens at a CCT of 2827 K and a color rendering index (CRI) of 80 using this project's phosphor developments.

Sean Evans

2011-01-31T23:59:59.000Z

356

American Society for Radiation Oncology (ASTRO) and American College of Radiology (ACR) Practice Guideline for the Performance of High-Dose-Rate Brachytherapy  

SciTech Connect (OSTI)

High-Dose-Rate (HDR) brachytherapy is a safe and efficacious treatment option for patients with a variety of different malignancies. Careful adherence to established standards has been shown to improve the likelihood of procedural success and reduce the incidence of treatment-related morbidity. A collaborative effort of the American College of Radiology (ACR) and American Society for Therapeutic Radiation Oncology (ASTRO) has produced a practice guideline for HDR brachytherapy. The guideline defines the qualifications and responsibilities of all the involved personnel, including the radiation oncologist, physicist and dosimetrists. Review of the leading indications for HDR brachytherapy in the management of gynecologic, thoracic, gastrointestinal, breast, urologic, head and neck, and soft tissue tumors is presented. Logistics with respect to the brachytherapy implant procedures and attention to radiation safety procedures and documentation are presented. Adherence to these practice guidelines can be part of ensuring quality and safety in a successful HDR brachytherapy program.

Erickson, Beth A. [Department of Radiation Oncology, Medical College of Wisconsin, Milwaukee, WI (United States); Demanes, D. Jeffrey [Department of Radiation Oncology , University of California, Los Angeles, CA (United States); Ibbott, Geoffrey S. [Radiological Physics Center, MD Anderson Cancer Center, Houston, TX (United States); Hayes, John K. [Gamma West Brachytherapy, Salt Lake City, UT (United States); Hsu, I-Chow J. [Department of Radiation Oncology, University of California San Francisco, San Francisco, CA (United States); Morris, David E. [Department of Radiation Oncology, University of North Carolina, Chapel Hill, NC (United States); Rabinovitch, Rachel A. [Department of Radiation Oncology, University of Colorado Denver, Aurora, CO (United States); Tward, Jonathan D. [Department of Radiation Oncology, Huntsman Cancer Institute, Salt Lake City, UT (United States); Rosenthal, Seth A. [Radiation Oncology Centers, Radiological Associates of Sacramento, Sacramento, CA (United States)

2011-03-01T23:59:59.000Z

357

Minimizing Variation in Outdoor CPV Power Ratings (Presentation)  

SciTech Connect (OSTI)

Presented at the 7th International Conference on Concentrating Photovoltaic Systems (CPV-7), 4-6 April 2011, Las Vegas, Nevada. The CPV community has agreed to have both indoor and outdoor power ratings at the module level. The indoor rating provides a repeatable measure of module performance as it leaves the factory line while the outdoor rating provides a measure of true performance under real world conditions. The challenge with an outdoor rating is that the spectrum, temperature, wind speed, etc are constantly in flux and therefore the resulting power rating varies from day to day and month to month. This work examines different methodologies for determining the outdoor power rating with the goal of minimizing variation even if data are collected under changing meteorological conditions.

Muller, M.

2011-04-01T23:59:59.000Z

358

Electrochemical Corrosion Rate Sensors for Waste Incineration Applications  

SciTech Connect (OSTI)

Electrochemical corrosion rate sensors work in high temperature waste incineration applications where ash is deposited. The ash serves as the electrolyte for electrochemical measurements, such as liner polarization resistance, electrochemical noise, and harmonic distortion analyses. Results to date have shown that these types of sensors respond qualitatively to changes in temperature, gas composition, alloy composition, and type of ash. Several years of research have shown that high temperature corrosion rate probes need to be better understood before corrosion rate can be used as a process variable by power plant operators. More recent research has shown that electrochemical corrosion probes typically measure lower corrosion rates than those measured by standard mass loss techniques. While still useful for monitoring changes in corrosion rates, absolute probe corrosion rates will need a calibration factor to be useful. Ideas for research that may help resolve these issues are presented.

Covino, B.S., Jr.; Bullard, S.J.; Matthes, S.A.; Holcomb, G.R.; Ziomek-Moroz, M.; Eden, D.A. (Honeywell Intercorr)

2007-03-01T23:59:59.000Z

359

Radiation dose rates from UF{sub 6} cylinders  

SciTech Connect (OSTI)

This paper describes the results of many studies, both theoretical and experimental, which have been carried out by Urenco over the last 15 years into radiation dose rates from uranium hexafluoride (UF{sub 6}) cylinders. The contents of the cylinder, its history, and the geometry all affect the radiation dose rate. These factors are all examined in detail. Actual and predicted dose rates are compared with levels permitted by IAEA transport regulations.

Friend, P.J. [Urenco, Capenhurst (United Kingdom)

1991-12-31T23:59:59.000Z

360

Experiences with leak rate calculations methods for LBB application  

SciTech Connect (OSTI)

In this paper, three leak rate computer programs for the application of leak before break analysis are described and compared. The programs are compared to each other and to results of an HDR Reactor experiment and two real crack cases. The programs analyzed are PIPELEAK, FLORA, and PICEP. Generally, the different leak rate models are in agreement. To obtain reasonable agreement between measured and calculated leak rates, it was necessary to also use data from detailed crack investigations.

Grebner, H.; Kastner, W.; Hoefler, A.; Maussner, G. [and others

1997-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Cost Bases for Incentive Rates Applicable to Industrial Loads  

E-Print Network [OSTI]

great deal of attention and increased acceptance. This represents a substantial change in attitude, particularly on the part of the regulatory commissions; a few years ago any proposal related to an incentive type rate would not have been... in rate discrimination as between customer classes. Over the last few years many utilities have experienced changes that have resulted in increased interest in incentive rates by the utility, by its customer, and by the regulatory commission. In most...

Stover, C. N.

362

High temperature electrochemical corrosion rate probes for combustion environments  

SciTech Connect (OSTI)

Electrochemical corrosion rate probes have been constructed and tested along with mass loss coupons in an air plus water vapor and a N2/O2/CO2 plus water vapor environment. Temperatures ranged from 200? to 700?C. Results show that electrochemical corrosion rates for ash-covered mild steel are a function of time, temperature and process environment. Correlation between the electrochemical and mass loss corrosion rates was poor.

Covino, Bernard S., Jr.; Bullard, Sophie J.; Cramer, Stephen D.; Holcomb, Gordon R.; Ziomek-Moroz, Margaret; Eden, David A. (Intercorr International Inc.); Kane, Russell D. (Intercorr International Inc.); Eden, Dawn C. (Intercorr International Inc.)

2004-01-01T23:59:59.000Z

363

Charged-Particle Thermonuclear Reaction Rates: III. Nuclear Physics Input  

E-Print Network [OSTI]

The nuclear physics input used to compute the Monte Carlo reaction rates and probability density functions that are tabulated in the second paper of this series (Paper II) is presented. Specifically, we publish the input files to the Monte Carlo reaction rate code RatesMC, which is based on the formalism presented in the first paper of this series (Paper I). This data base contains overwhelmingly experimental nuclear physics information. The survey of literature for this review was concluded in November 2009.

Christian Iliadis; Richard Longland; Art Champagne; Alain Coc

2010-04-23T23:59:59.000Z

364

Home energy ratings systems: Actual usage may vary  

SciTech Connect (OSTI)

Home energy ratings (HERS) attempt to predict typical energy costs for a given residence and estimate the savings potentials of various energy retrofits. This article discusses where the ratings could be improved to more accurately predict the actual energy consumption. Topics covered include the following: is HERS on target (scores, energy predictions, recommended energy improvements); why HERS aren`t perfect; improvements in HERS; the possibility that home energy ratings systems will become market driven. 1 fig., 2 tabs.

Stein, J.R. [Lawrence Berkeley National Lab., CA (United States)

1997-09-01T23:59:59.000Z

365

Optimization Online - Convergence rate analysis of the forward ...  

E-Print Network [OSTI]

Oct 9, 2014 ... Convergence rate analysis of the forward-Douglas-Rachford splitting scheme. Damek Davis (Damek ***at*** math.ucla.edu). Abstract: Operator ...

Damek Davis

2014-10-09T23:59:59.000Z

366

air change rate: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Rydhof 2 Traffic-related air pollution exposures and changes in heart rate variability in Mexico City: A panel study MIT - DSpace Summary: Abstract Background While air pollution...

367

air change rates: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Rydhof 2 Traffic-related air pollution exposures and changes in heart rate variability in Mexico City: A panel study MIT - DSpace Summary: Abstract Background While air pollution...

368

ORISE: Report shows nuclear engineering graduation rates on the...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ORISE report shows nuclear engineering graduation rates on the rise in 2013 Number of graduate degrees expected to remain consistent, but undergraduate degrees could see decrease...

369

Updated fracture incidence rates for the US version of FRAX®  

E-Print Network [OSTI]

presenting with non-vertebral fractures. Osteoporos Int 18:2006) Epidemiology of vertebral fractures: implications forORIGINAL ARTICLE Updated fracture incidence rates for the US

Ettinger, B.; Black, D. M.; Dawson-Hughes, B.; Pressman, A. R.; Melton, L. J.

2010-01-01T23:59:59.000Z

370

Regional Dialogue Guidebook: Background on Products, Rates, and...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

on Products, Rates, and Resource Support Services available to BPA's Public Utilities Updated June 4, 2010 This page intentionally left blank. For Regional Dialogue...

371

acrosome reaction rate: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

fertilizing capacity29 . A Received 1 March; accepted 23 April Myhr, Karen 2 On thermonuclear reaction rates Astrophysics (arXiv) Summary: Nuclear reactions govern major...

372

Calculation of tunneling rates across a barrier with continuous potential  

E-Print Network [OSTI]

Here, approximate, but accurate expressions for calculation of wavefunctions and tunneling rates are obtained using the method of uniform asymptotic expansion.

Sina Khorasani

2011-04-10T23:59:59.000Z

373

Guidance on Utility Rate Estimations and Weather Normalization...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and Weather Normalization in an ESPC Document explains how to use estimated energy rates and normalized weather data in determining an energy service company's (ESCO's)...

374

Gradient methods for convex minimization: better rates under ...  

E-Print Network [OSTI]

Mar 20, 2013 ... Gradient methods for convex minimization: better rates under weaker conditions. Hui Zhang(hhuuii.zhang ***at*** gmail.com)

Hui Zhang

2013-03-20T23:59:59.000Z

375

Merger and Ring Galaxy Formation Rates at z<=2  

E-Print Network [OSTI]

We compare the observed merger rate of galaxies over cosmic time and the frequency of collisional ring galaxies (CRGs), with analytic models and halo merger and collision rates from a large cosmological simulation. In the Lambda cold dark matter (LCDM) model we find that the cosmic {\\it merger fraction} does not evolve strongly between 0.2rate since z~1 might not be tied to a disappearing population of major mergers. Halos hosting massive galaxies undergo on average ~2 mergers from z~2 up to present day, reflecting the late assembly time for the massive systems and the related downsizing problem. The cosmic {\\it merger rate} declines with redshift: at the present time it is a factor of 10 lower than at z~2, in reasonable agreement with the current available data. The rate of CRG formation derived from the interactions between halo progenitors up to z=2 is found to be a good tracer of the cosmic merger rate. In the LCDM model the rate of CRGs as well as the merger rate do not scale as (1+z)^m, as suggested by previous models. Our predictions of cosmic merger and CRG rates may be applied to forthcoming surveys such as GOODS and zCOSMOS.

E. D'Onghia; M. Mapelli; B. Moore

2008-06-20T23:59:59.000Z

376

Tomography increases key rates of quantum-key-distribution protocols  

E-Print Network [OSTI]

We construct a practically implementable classical processing for the BB84 protocol and the six-state protocol that fully utilizes the accurate channel estimation method, which is also known as the quantum tomography. Our proposed processing yields at least as high key rate as the standard processing by Shor and Preskill. We show two examples of quantum channels over which the key rate of our proposed processing is strictly higher than the standard processing. In the second example, the BB84 protocol with our proposed processing yields a positive key rate even though the so-called error rate is higher than the 25% limit.

Shun Watanabe; Ryutaroh Matsumoto; Tomohiko Uyematsu

2008-07-22T23:59:59.000Z

377

Rate controlling model for bioremediation of oil contaminated soil  

SciTech Connect (OSTI)

A mathematical model of bio-remediation of hydrocarbons in a soil matrix has been developed to predict the rate controlling step and the remediation rate during the bioremediation of a contaminated soil. The model is based on mass transfer of oxygen and oil into the aqueous solution in the soil matrix and the biodegradation of the hydrocarbons in the aqueous solution. Monod's equation was used to describe the biodegradation rate in aqueous solution while the mass transfer equations were used to describe the mass transfer rates of oxygen and oil in the soil matrix. Results from model calculations indicate that the bio-remediation rate increases and approaches a limiting value when one of the rates becomes controlling. When the parameters of the site soil samples are measured and the solubilities of oxygen and oil in aqueous solution are obtained, the bioremediation rate can be predicted by this model. The rate controlling step of the bioremediation site may be identified quickly and steps to improve the bioremediation rate can be recommended. 8 refs., 7 figs.

Li, K.Y.; Annamali, S.N.; Hopper, J.R. (Lamar Univ., Beaumont, TX (United States))

1993-11-01T23:59:59.000Z

378

Scaling of the magnetic reconnection rate with symmetric shear flow  

SciTech Connect (OSTI)

The scaling of the reconnection rate during (fast) Hall magnetic reconnection in the presence of an oppositely directed bulk shear flow parallel to the reconnecting magnetic field is studied using two-dimensional numerical simulations of Hall reconnection with two different codes. Previous studies noted that the reconnection rate falls with increasing flow speed and shuts off entirely for super-Alfvenic flow, but no quantitative expression for the reconnection rate in sub-Alfvenic shear flows is known. An expression for the scaling of the reconnection rate is presented.

Cassak, P. A. [Department of Physics, West Virginia University, Morgantown, West Virginia 26506 (United States); Otto, A. [Geophysical Institute, University of Alaska-Fairbanks, Fairbanks, Alaska 99775 (United States)

2011-07-15T23:59:59.000Z

379

Construction, Qualification, and Low Rate Production Start-up...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Manufacturing Facility with Capacity to Support 100,000 Electric Drive Vehicles Construction, Qualification, and Low Rate Production Start-up of a DC Bus Capacitor High Volume...

380

Certification and Rating of Attachments for Fenestration Technologies...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

rate fenestration attachment energy performance and provide accurate and useful product comparison criteria, allowing end users in residential and commercial markets to assess...

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

agitation rating scale: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

observations by combining two concepts: the impact of cell sizes on metabolic rate and fractal-like (hierarchical) organization. The proposed model both theoretically and...

382

activation analysis rates: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

pressure signal. Although it is known rate analysis often replaces electrocardiogram (ECG) devices with the advantage that it does a device, worn at the wrist for a great...

383

John S. Wright Forestry Center Room Sizes, Capacities, and Rates  

E-Print Network [OSTI]

Appendix 1 John S. Wright Forestry Center Room Sizes, Capacities, and Rates Room College the Wright Center contact: Marlene Mann, Administrative Assistant Forestry and Natural Resources Voice: 765

384

Colorado State University Mail Services DOMESTIC & INTERNATIONAL POSTAGE RATES January 26  

E-Print Network [OSTI]

Colorado State University ­ Mail Services DOMESTIC & INTERNATIONAL POSTAGE RATES January 26 th Flat Rate Envelope $5.60 Legal Flat Rate Envelope $5.75 Padded Flat Rate Envelope $5.95 Small Flat Rate Box $5.80 Medium Flat Rate Box $12.35 Large Flat Rate Box $17.45 APO/FPO Large Flat Rate Box $15

385

E-Print Network 3.0 - accelerated evolutionary rate Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

rate Search Powered by Explorit Topic List Advanced Search Sample search results for: accelerated evolutionary rate...

386

E-Print Network 3.0 - accelerated evolutionary rates Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

rates Search Powered by Explorit Topic List Advanced Search Sample search results for: accelerated evolutionary rates...

387

Efficacy of Aqui-S as an Anesthetic for Market-Sized Striped Bass L. CURRY WOODS III,* DANIEL D. THEISEN, AND SHUYANG HE  

E-Print Network [OSTI]

for the temperate striped bass Morone saxatilis. Methods Source of fish and anesthetic.--All of the striped bassEfficacy of Aqui-S as an Anesthetic for Market-Sized Striped Bass L. CURRY WOODS III,* DANIEL D 20742, USA Abstract.--Market-sized 2-year-old striped bass Morone saxatilis (average weight, 645 g) were

Hamza, Iqbal

388

Charged-Particle Thermonuclear Reaction Rates: II. Tables and Graphs of Reaction Rates and Probability Density Functions  

E-Print Network [OSTI]

Numerical values of charged-particle thermonuclear reaction rates for nuclei in the A=14 to 40 region are tabulated. The results are obtained using a method, based on Monte Carlo techniques, that has been described in the preceding paper of this series (Paper I). We present a low rate, median rate and high rate which correspond to the 0.16, 0.50 and 0.84 quantiles, respectively, of the cumulative reaction rate distribution. The meaning of these quantities is in general different from the commonly reported, but statistically meaningless expressions, "lower limit", "nominal value" and "upper limit" of the total reaction rate. In addition, we approximate the Monte Carlo probability density function of the total reaction rate by a lognormal distribution and tabulate the lognormal parameters {\\mu} and {\\sigma} at each temperature. We also provide a quantitative measure (Anderson-Darling test statistic) for the reliability of the lognormal approximation. The user can implement the approximate lognormal reaction rate probability density functions directly in a stellar model code for studies of stellar energy generation and nucleosynthesis. For each reaction, the Monte Carlo reaction rate probability density functions, together with their lognormal approximations, are displayed graphically for selected temperatures in order to provide a visual impression. Our new reaction rates are appropriate for bare nuclei in the laboratory. The nuclear physics input used to derive our reaction rates is presented in the subsequent paper of this series (Paper III). In the fourth paper of this series (Paper IV) we compare our new reaction rates to previous results.

Christian Iliadis; Richard Longland; Art Champagne; Alain Coc; Ryan Fitzgerald

2010-04-23T23:59:59.000Z

389

"Research to Improve the Efficacy of Captive Broodstock Programs and Advance Hatchery Reform Throughout the Columbia River Basin." [from the Abstract], 2008-2009 Progress Report.  

SciTech Connect (OSTI)

This project was developed to conduct research to improve the efficacy of captive broodstock programs and advance hatchery reform throughout the Columbia River Basin. The project has three objectives: (1) maintain adaptive life history characteristics in Chinook salmon, (2) improve imprinting in juvenile sockeye salmon, and (3) match wild phenotypes in Chinook and sockeye salmon reared in hatcheries. A summary of the results are as follows: Objective 1: The ratio of jack to adult male Chinook salmon were varied in experimental breeding populations to test the hypothesis that reproductive success of the two male phenotypes would vary with their relative frequency in the population. Adult Chinook salmon males nearly always obtained primary access to nesting females and were first to enter the nest at the time of spawning. Jack male spawning occurred primarily by establishing satellite positions downstream of the courting pair, and 'sneaking' into the nest at the time of spawning. Male dominance hierarchies were fairly stable and strongly correlated with the order of nest entry at the time of spawning. Observed participation in spawning events and adult-to-fry reproductive success of jack and adult males was consistent with a negative frequency-dependent selection model. Overall, jack males sired an average of 21% of the offspring produced across a range of jack male frequencies. Implications of these and additional findings on Chinook salmon hatchery broodstock management will be presented in the FY 2009 Annual Report. Objective 2: To determine the critical period(s) for imprinting for sockeye salmon, juvenile salmon were exposed to known odorants at key developmental stages. Molecular assessments of imprinting-induced changes in odorant receptor gene expression indicated that regulation of odorant expression is influenced by developmental status and odor exposure history. Expression levels of basic amino acid receptor (BAAR) mRNA in the olfactory epithelium increased dramatically during final maturation in both Stanley Basin and Okanogan River sockeye. These increases appeared to be independent of odor exposure history, rising significantly in both arginine-naive and arginine-exposed fish. However, sockeye exposed to arginine during smolting demonstrated a larger increase in BAAR mRNA than arginine-naive fish. These results are consistent with the hypothesis that odorant receptors sensitive to home stream waters may be upregulated at the time of the homing migration and may afford opportunities to exploit this system to experimentally characterize imprinting success and ultimately identify hatchery practices that will minimize straying of artificially produced salmonids. Additional analysis of Sockeye salmon imprinting and further implications of these findings will be presented in the FY 2009 Annual Report. Objective 3: Photoperiod at emergence and ration after ponding were varied in Yakima River spring Chinook salmon to test the hypothesis that seasonal timing of emergence and growth during early stages of development alter seasonal timing of smoltification and age of male maturation. Fish reared under conditions to advance fry emergence and accelerate growth had the greatest variation in seasonal timing of smolting (fall, spring and summer) and highest rates of early male maturation with most males maturing at age 1 (35-40%). In contrast, fish with delayed emergence and slow growth had the least variation in phenotypes with most fish smolting as yearlings in the spring and no age-1 male maturation. Growth (not emergence timing) altered rates of age-2 male maturation. Results of this study demonstrate that altering fry development, as is often done in hatcheries, can profoundly affect later life history transitions and the range of phenotypes within a spring Chinook salmon population. Additional work in the next funding period will determine if these rearing regimes affected other aspects of smolt quality, which may affect ultimate survival upon ocean entry.

Berejikian, Barry A. [National Oceanic and Atmospheric Administration, National Marine Fisheries Service

2009-08-18T23:59:59.000Z

390

Heart-Rate Pacing Simulation and Control via Multiagent Systems  

E-Print Network [OSTI]

Heart-Rate Pacing Simulation and Control via Multiagent Systems Alessandro Beda 1 and Nicola Gatti system of heart rate, but the results are so poor that the use of such models in commercial pacemakers evaluation. In litera- ture several techniques are adopted to combine models; for instance, in heart

Gatti, Nicola

391

PROCEEDINGS OF THE PELAGIC LONGLINE CATCH RATE STANDARDIZATION MEETING  

E-Print Network [OSTI]

PROCEEDINGS OF THE PELAGIC LONGLINE CATCH RATE STANDARDIZATION MEETING February 12-16, 2007 Imin;#12;Pelagic longline catch rate standardization meeting, Feb 2007 Table of Contents Introduction........................................................................................................... 6 1. Overview of longline effort standardizations in current Pacific HMS assessments... 6 2. Models

Hawai'i at Manoa, University of

392

Oil production models with normal rate curves Dudley Stark  

E-Print Network [OSTI]

Oil production models with normal rate curves Dudley Stark School of Mathematical Sciences Queen;Abstract The normal curve has been used to fit the rate of both world and U.S.A. oil production. In this paper we give the first theoretical basis for these curve fittings. It is well known that oil field

Stark, Dudley

393

Upscaling geochemical reaction rates using pore-scale network modeling  

E-Print Network [OSTI]

. To examine the scaling behavior of reaction kinetics, these continuum-scale rates from the network model as a valuable research tool for examining upscaling of geochemical kinetics. The pore-scale model allowsUpscaling geochemical reaction rates using pore-scale network modeling Li Li, Catherine A. Peters

Peters, Catherine A.

394

Extinction rates under nonrandom patterns of habitat loss  

E-Print Network [OSTI]

conversion on species extinctions assume that habitat conversion occurs at ran- dom. This assumption allows predictions about extinction rates based on the species­area relationship. We show that the spatially compositional gradients, or species richness, also alter pre- dicted species extinction rates. We illustrate

395

Weathering rates of marble in laboratory and outdoor conditions  

SciTech Connect (OSTI)

In the modern urban atmosphere SO{sub 2} and NO{sub 2} attack calcite (CaCO{sub 3}) in marble exposed at rain-sheltered surfaces creating largely gypsum (CaSO{sub 4}{center_dot}2H{sub 2}O) crusts that eventually exfoliate. In combination with CO{sub 2} these gases erode the marble at unsheltered surfaces. the authors report the development of mathematical models to predict the rate of growth of crust and the rate of surface recession. To determine the rate of growth of crust the kinetic rate constant, diffusion rate, and the order of reaction were determined by the application of the shrinking-core model applied to data generated in laboratory experiments. Based on these parameters /and average ambient levels of 10 parts per billion (ppb) SO{sub 2} and 25 ppb NO{sub 2} in Louisville, Ky., the rate of crust formation for this metro area was calculated to be 1.8 {micro}m in the first year. However, the rate of recession was modeled from data obtained by exposing marble slabs to rainfalls. A surface recession of 15 {micro}m/yr was calculated. The models predicted well the rate of growth of crust observed at several sites in Louisville and the predicted surface recession compared well with values reported in the literature.

Yerrapragada, S.S.; Chirra, S.R.; Jaynes, J.H.; Bandyopadhyay, J.K.; Gauri, K.L. [Univ of Louisville, KY (United States); Li, S. [Metro Services Lab., Louisville, KY (United States)

1996-09-01T23:59:59.000Z

396

November 2005 Deforestation and the Real Exchange Rate  

E-Print Network [OSTI]

November 2005 Deforestation and the Real Exchange Rate Abstract Deforestation is a phenomenon of deforestation that focuses on the factors a¤ecting the incen- tives to transform forested land into agricultural land. We show that: (i) lower discount rates and stronger institutions decrease deforestation; (ii

Paris-Sud XI, Université de

397

Demonstration of Reduced Airport Congestion through Pushback Rate Control  

E-Print Network [OSTI]

of a congestion control strategy at Boston Logan International Airport. The approach determines a suggested rate Control Demonstration at Boston Logan International Airport (BOS) was to show that a significant portionDemonstration of Reduced Airport Congestion through Pushback Rate Control Ioannis Simaiakis

Gummadi, Ramakrishna

398

Service Differentiation in Multi-Rate HSDPA Systems  

E-Print Network [OSTI]

--In multi-rate cellular transmission systems, users with different Quality of Service (QoS) requirements for the uplink (HSUPA). These wireless transmission technologies promise enhanced data rates for mobile Internet layer transmission [18]. CDMA is a clever modulation scheme that allows multiple users to transmit

Williamson, Carey

399

Adult Football Helmet Detailed Ratings Riddell Revolution Speed  

E-Print Network [OSTI]

Adult Football Helmet Detailed Ratings May 2011 Riddell Revolution Speed Helmet ID SPEED1 SPEED2: A total of 10 adult football helmet models were evaluated using the STAR evaluation system for May 2011.397 0.350 0.322 Overall STAR 0.356 Very Good: Adult Football Helmet Detailed Ratings May 2011 #12

Lu, Chang

400

RATE DISTORTION OPTIMIZED DOCUMENT CODING USING RESOLUTION ENHANCED RENDERING  

E-Print Network [OSTI]

RATE DISTORTION OPTIMIZED DOCUMENT CODING USING RESOLUTION ENHANCED RENDERING Guotong Feng , Hui at a fixed bit rate. This method, which we call resolution enhanced rendering (RER), works by adaptively enhanced rendering (RER) for jointly optimizing the THIS WORK IS SUPPORTED BY THE XEROX FOUNDATION. MRC

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Interest Rate Clustering in UK Financial Services Markets  

E-Print Network [OSTI]

interest rate setting differs from previous empirical work examining the topic. It has been common1 Interest Rate Clustering in UK Financial Services Markets by John K. Ashton Norwich Business University Business School CCP Working Paper 06-14 Abstract: In applications as diverse as banking

Feigon, Brooke

402

Wall recession rates in cavity-growth modeling  

SciTech Connect (OSTI)

The predictions of resource utilization obtained from cavity-growth models depend on the methods used to represent the recession rates of the walls of the cavity. Under many circumstances the cavity is largely filled with a bed char rubble. Examination of the mechanisms for recession at walls adjacent to these char beds indicates that the recession rates are controlled by convective heat transfer from the bed to the walls coupled with the thermomechanical breakdown of the walls. A recession-rate representation has been developed, based on this concept, for use in cavity-growth simulation programs. This representation characterizes wall breakdown by either a failure temperature or by a thickness of char layer at failure, and determines rates from a model of heat transfer under these conditions. It gives recession rates that are functions of gas temperature and mass flow rate in the cavity, and depend on effective particle size in the char bed. Wall recession rates calculated for WIDCO, Hoe Creek, and Hanna coals are in the range of 0.1 to 0.8 m/day at a 1300 K cavity temperature, and are consistent with the general rates observed for field tests. 27 references, 10 figures, 1 table.

Grens, E.A. II; Thorsness, C.B.

1984-08-01T23:59:59.000Z

403

Cosmic Supernova Rate History and Type Ia Supernova Progenitors  

E-Print Network [OSTI]

Adopting a single degenerate scenario for Type Ia supernova progenitors with the metallicity effect, we make a prediction of the cosmic supernova rate history as a composite of the supernova rates in spiral and elliptical galaxies, and compare with the recent observational data up to z ~ 0.55.

Chiaki Kobayashi; Ken'ichi Nomoto; Takuji Tsujimoto

2001-02-14T23:59:59.000Z

404

Adaptive Rate Stream Processing for Smart Grid Applications on Clouds  

E-Print Network [OSTI]

Adaptive Rate Stream Processing for Smart Grid Applications on Clouds Yogesh Simmhan University within a smart (power) grid are providing utilities and power systems researchers with unprecedentedEngineering applications in the smart grid domain. One unique aspect of our work is the use of adaptive rate control

Prasanna, Viktor K.

405

MINNESOTA ROAD FEE TEST MILEAGE BASED USER FEE RATE  

E-Print Network [OSTI]

Policy Center Oregon Road User Fee Pilot Program Other Interest: Nevada, Texas, Ohio, Idaho, etc. May Cellular Tower Data Warehouse May 24, 2012 6 #12;Determination of Mileage Fees · MBUF Rate StructureMINNESOTA ROAD FEE TEST MILEAGE BASED USER FEE RATE STRUCTURE CONCEPT 23rd Annual Transportation

Minnesota, University of

406

Statistical Methods for Thermonuclear Reaction Rates and Nucleosynthesis Simulations  

E-Print Network [OSTI]

Rigorous statistical methods for estimating thermonuclear reaction rates and nucleosynthesis are becoming increasingly established in nuclear astrophysics. The main challenge being faced is that experimental reaction rates are highly complex quantities derived from a multitude of different measured nuclear parameters (e.g., astrophysical S-factors, resonance energies and strengths, particle and gamma-ray partial widths). We discuss the application of the Monte Carlo method to two distinct, but related, questions. First, given a set of measured nuclear parameters, how can one best estimate the resulting thermonuclear reaction rates and associated uncertainties? Second, given a set of appropriate reaction rates, how can one best estimate the abundances from nucleosynthesis (i.e., reaction network) calculations? The techniques described here provide probability density functions that can be used to derive statistically meaningful reaction rates and final abundances for any desired coverage probability. Examples ...

Iliadis, Christian; Coc, Alain; Timmes, F X; Champagne, Art E

2014-01-01T23:59:59.000Z

407

Energy levels, radiative rates and electron impact excitation rates for transitions in C III  

E-Print Network [OSTI]

We report energy levels, radiative rates (A-values) and lifetimes for the astrophysically-important Be-like ion C III. For the calculations, 166 levels belonging to the $n \\le$ 5 configurations are considered and the {\\sc grasp} (General-purpose Relativistic Atomic Structure Package) is adopted. Einstein A-coefficients are provided for all E1, E2, M1 and M2 transitions, while lifetimes are compared with available measurements as well as theoretical results, and no large discrepancies noted. Our energy levels are assessed to be accurate to better than 1\\% for a majority of levels, and A-values to better than 20\\% for most transitions. Collision strengths are also calculated, for which the Dirac Atomic R-matrix Code ({\\sc darc}) is used. A wide energy range, up to 21 Ryd, is considered and resonances resolved in a fine energy mesh in the thresholds region. The collision strengths are subsequently averaged over a Maxwellian velocity distribution to determine effective collision strengths up to a temperature of 8...

Aggarwal, K M

2015-01-01T23:59:59.000Z

408

Multi-UAV Network Control through Dynamic Task Allocation: Ensuring Data-Rate and Bit-Error-Rate Support  

E-Print Network [OSTI]

Multi-UAV Network Control through Dynamic Task Allocation: Ensuring Data-Rate and Bit-Error-Rate Support Andrew Kopeikin, Sameera S. Ponda, Luke B. Johnson, and Jonathan P. How Abstract-- A multi-UAV distributed task allocation to engage under-utilized UAVs to serve as communication relays and to ensure

How, Jonathan P.

409

FY 2015 -Rates for Self-Sustaining Services Rates are contingent upon approval by UW Management Accounting & Analysis.  

E-Print Network [OSTI]

Pager Feature - Group Call Retiring $2.30 Group Monthly Mobile Technology Basic Smartphone Support - iFY 2015 - Rates for Self-Sustaining Services Rates are contingent upon approval by UW Management Nebula Managed Desktop $36.50 $39.90 Computer Monthly Nebula Hourly Support $109.00 $109.00 Hour Each

Kaminsky, Werner

410

Properties of water surface discharge at different pulse repetition rates  

SciTech Connect (OSTI)

The properties of water surface discharge plasma for variety of pulse repetition rates are investigated. A magnetic pulse compression (MPC) pulsed power modulator able to deliver pulse repetition rates up to 1000?Hz, with 0.5?J per pulse energy output at 25?kV, was used as the pulsed power source. Positive pulse with a point-to-plane electrode configuration was used for the experiments. The concentration and production yield of hydrogen peroxide (H{sub 2}O{sub 2}) were quantitatively measured and orange II organic dye was treated, to evaluate the chemical properties of the discharge reactor. Experimental results show that the physical and chemical properties of water surface discharge are not influenced by pulse repetition rate, very different from those observed for under water discharge. The production yield of H{sub 2}O{sub 2} and degradation rate per pulse of the dye did not significantly vary at different pulse repetition rates under a constant discharge mode on water surface. In addition, the solution temperature, pH, and conductivity for both water surface and underwater discharge reactors were measured to compare their plasma properties for different pulse repetition rates. The results confirm that surface discharge can be employed at high pulse repetition rates as a reliable and advantageous method for industrial and environmental decontamination applications.

Ruma,; Yoshihara, K. [Graduate School of Science and Technology, Kumamoto University, Kumamoto 860-8555 (Japan); Hosseini, S. H. R., E-mail: hosseini@kumamoto-u.ac.jp; Sakugawa, T.; Akiyama, H. [Graduate School of Science and Technology, Kumamoto University, Kumamoto 860-8555 (Japan); Institute of Pulsed Power Science, Kumamoto University, Kumamoto 860-8555 (Japan); Akiyama, M. [Department of Electrical and Electronic Engineering, Kagoshima University, Kagoshima 890-0065 (Japan); Lukeš, P. [Institute of Plasma Physics, AS CR, Prague, Prague 18200 (Czech Republic)

2014-09-28T23:59:59.000Z

411

Evolution of Massive Protostars with High Accretion Rates  

E-Print Network [OSTI]

Formation of massive stars by accretion requires a high accretion rate of > 10^-4 M_sun/yr to overcome the radiation pressure barrier of the forming stars. Here, we study evolution of protostars accreting at such high rates, by solving the structure of the central star and the inner accreting envelope simultaneously. The protostellar evolution is followed starting from small initial cores until their arrival at the stage of the Zero-Age Main Sequence (ZAMS) stars. An emphasis is put on evolutionary features different from those with a low accretion rate of 10^-5 M_sun/yr, which is presumed in the standard scenario for low-mass star formation. With the high accretion rate of 10^-3 M_sun/yr, the protostellar radius becomes very large and exceeds 100 R_sun. It is not until the stellar mass reaches 40 M_sun that hydrogen burning begins and the protostar reaches the ZAMS phase, and this ZAMS arrival mass increases with the accretion rate. At a very high accretion rate of > 3 x 10^-3 M_sun/yr, the total luminosity of the protostar becomes so high that the resultant radiation pressure inhibits the growth of the protostars under steady accretion before reaching the ZAMS stage. Therefore, the evolution under the critical accretion rate 3 x 10^-3 M_sun/yr gives the upper mass limit of possible pre-main-sequence stars at 60 M_sun. The upper mass limit of MS stars is also set by the radiation pressure onto the dusty envelope under the same accretion rate at 250 M_sun. We also propose that the central source enshrouded in the Orion KL/BN nebula has effective temperature and luminosity consistent with our model, and is a possible candidate for such protostars growing under the high accretion rate. (abridged)

Takashi Hosokawa; Kazuyuki Omukai

2008-06-25T23:59:59.000Z

412

Standby Rates for Combined Heat and Power Systems  

SciTech Connect (OSTI)

Improvements in technology, low natural gas prices, and more flexible and positive attitudes in government and utilities are making distributed generation more viable. With more distributed generation, notably combined heat and power, comes an increase in the importance of standby rates, the cost of services utilities provide when customer generation is not operating or is insufficient to meet full load. This work looks at existing utility standby tariffs in five states. It uses these existing rates and terms to showcase practices that demonstrate a sound application of regulatory principles and ones that do not. The paper also addresses areas for improvement in standby rates.

Sedano, Richard [Regulatory Assistance Partnership; Selecky, James [Brubaker & Associates, Inc.; Iverson, Kathryn [Brubaker & Associates, Inc.; Al-Jabir, Ali [Brubaker & Associates, Inc.

2014-02-01T23:59:59.000Z

413

Solidification at the High and Low Rate Extreme  

SciTech Connect (OSTI)

The microstructures formed upon solidification are strongly influenced by the imposed growth rates on an alloy system. Depending on the characteristics of the solidification process, a wide range of growth rates is accessible. The prevailing solidification mechanisms, and thus the final microstructure of the alloy, are governed by these imposed growth rates. At the high rate extreme, for instance, one can have access to novel microstructures that are unattainable at low growth rates. While the low growth rates can be utilized for the study of the intrinsic growth behavior of a certain phase growing from the melt. Although the length scales associated with certain processes, such as capillarity, and the diffusion of heat and solute, are different at low and high rate extremes, the phenomena that govern the selection of a certain microstructural length scale or a growth mode are the same. Consequently, one can analyze the solidification phenomena at both high and low rates by using the same governing principles. In this study, we examined the microstructural control at both low and high extremes. For the high rate extreme, the formation of crystalline products and factors that control the microstructure during rapid solidification by free-jet melt spinning are examined in Fe-Si-B system. Particular attention was given to the behavior of the melt pool at different quench-wheel speeds. Since the solidification process takes place within the melt-pool that forms on the rotating quench-wheel, we examined the influence of melt-pool dynamics on nucleation and growth of crystalline solidification products and glass formation. High-speed imaging of the melt-pool, analysis of ribbon microstructure, and measurement of ribbon geometry and surface character all indicate upper and lower limits for melt-spinning rates for which nucleation can be avoided, and fully amorphous ribbons can be achieved. Comparison of the relevant time scales reveals that surface-controlled melt-pool oscillation may be the dominant factor governing the onset of unsteady thermal conditions accompanied by varying amounts of crystalline nucleation observed near the lower limit. At high quench-wheel velocities, the influence of these oscillations is minimal due to very short melt-pool residence times. However, microstructural evidence suggests that the entrapment of gas pockets at the wheel-metal interface plays a critical role in establishing the upper rate limit. An observed transition in wheel-side surface character with increasing melt-spinning rate supports this conclusion.

Halim Meco

2004-12-19T23:59:59.000Z

414

Evaluation of Instrumentation and Dynamic Thermal Ratings for Overhead Lines  

SciTech Connect (OSTI)

In 2010, a project was initiated through a partnership between the Department of Energy (DOE) and the New York Power Authority (NYPA) to evaluate EPRI?s rating technology and instrumentation that can be used to monitor the thermal states of transmission lines and provide the required real-time data for real-time rating calculations. The project included the installation and maintenance of various instruments at three 230 kV line sites in northern New York. The instruments were monitored, and data collection and rating calculations were performed for about a three year period.

Phillips, A.

2013-01-31T23:59:59.000Z

415

The Chern-Simons diffusion rate from higher curvature gravity  

E-Print Network [OSTI]

An important transport coefficient in the study of non-Abelian plasmas is the Chern-Simons diffusion rate, which parameterizes the rate of transition among the degenerate vacua of a gauge theory. We compute this quantity at strong coupling, via holography, using two theories of gravity with higher curvature corrections, namely Gauss-Bonnet gravity and quasi-topological gravity. We find that these corrections may either increase or decrease the result obtained from Einstein's gravity, depending on the value of the couplings. The Chern-Simons diffusion rate for Gauss-Bonnet gravity decreases as the shear viscosity over entropy ratio is increased.

Viktor Jahnke; Anderson Seigo Misobuchi; Diego Trancanelli

2014-03-13T23:59:59.000Z

416

Quantized Media with Absorptive Scatterers and Modified Atomic Emission Rates  

E-Print Network [OSTI]

Modifications in the spontaneous emission rate of an excited atom that are caused by extinction effects in a nearby dielectric medium are analyzed in a quantummechanical model, in which the medium consists of spherical scatterers with absorptive properties. Use of the dyadic Green function of the electromagnetic field near a a dielectric sphere leads to an expression for the change in the emission rate as a series of multipole contributions for which analytical formulas are obtained. The results for the modified emission rate as a function of the distance between the excited atom and the dielectric medium show the influence of both absorption and scattering processes.

L. G. Suttorp; A. J. van Wonderen

2011-02-14T23:59:59.000Z

417

Migrant Remittances and Exchange Rate Regimes in the Developing World  

E-Print Network [OSTI]

This article argues that the international financial consequences of immigration exert a substantial influence on the choice of exchange rate regimes in the developing world. Over the past two decades, migrant remittances ...

Singer, David Andrew

418

Figure 6. Projected Production for the Low Development Rate of...  

U.S. Energy Information Administration (EIA) Indexed Site

Low Development Rate of Technically Recoverable Oil Estimated at 5 Percent, Mean, and 95 Percent Probabilities for the ANWR Coastal Plain of the Alaska North Slope fig6.jpg (41132...

419

Figure 7. Projected Production for the High Development Rate...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Rate of Technically Recoverable Oil Estimated at 5 Percent, Mean, and 95 Percent Probabilities for the ANWR Coastal Plain of the Alaska North Slope fig7.jpg (43335 bytes) Source...

420

The impact of lead time on truckload transportation rates  

E-Print Network [OSTI]

The objective of this thesis was to analyze truckload shipment transactions in order to determine if rates are impacted by tender lead time, which is the amount of time between when a carrier is offered a load to when the ...

Caldwell, Erik R. (Erik Russell)

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Optimization of time-based rates in forward energy markets  

E-Print Network [OSTI]

This paper presents a new two-step design approach of Time-Based Rate (TBR) programs for markets with a high penetration of variable energy sources such as wind power. First, an optimal market time horizon must be determined ...

Wang, J.

422

Dimensional analysis of heart rate variability in heart transplant recipients  

SciTech Connect (OSTI)

We discuss periodicities in the heart rate in normal and transplanted hearts. We then consider the possibility of dimensional analysis of these periodicities in transplanted hearts and problems associated with the record.

Zbilut, J.P.; Mayer-Kress, G.; Geist, K.

1987-01-01T23:59:59.000Z

423

Currency Unions, Product Introductions, and the Real Exchange Rate  

E-Print Network [OSTI]

We use a novel data set of online prices of identical goods sold by four large global retailers in dozens of countries to study good-level real exchange rates and their aggregated behavior. First, in contrast to the prior ...

Cavallo, Alberto F.

424

Characteristics of spot-market rate indexes for truckload transportation  

E-Print Network [OSTI]

In the truckload transportation industry in the United States, a number of indexes are published that attempt to measure changes in rates, but no single index has emerged as an industry standard. Industry participants, ...

Bignell, Andrew (Andrew Souglas)

2013-01-01T23:59:59.000Z

425

On the maximum pressure rise rate in boosted HCCI operation  

E-Print Network [OSTI]

This paper explores the combined effects of boosting, intake air temperature, trapped residual gas fraction, and dilution on the Maximum Pressure Rise Rate (MPRR) in a boosted single cylinder gasoline HCCI engine with ...

Wildman, Craig B.

426

Nuclear astrophysical plasmas: ion distribution functions and fusion rates  

E-Print Network [OSTI]

This article illustrates how very small deviations from the Maxwellian exponential tail, while leaving unchanged bulk quantities, can yield dramatic effects on fusion reaction rates and discuss several mechanisms that can cause such deviations.

Marcello Lissia; Piero Quarati

2005-11-15T23:59:59.000Z

427

Nonlinear stochastic growth rates and redshift space distortions  

E-Print Network [OSTI]

The linear growth rate is commonly defined through a simple deterministic relation between the velocity divergence and the matter overdensity in the linear regime. Here we introduce a formalism that extends this to a nonlinear, stochastic relation between $\\theta = \

Jennings, Elise

2015-01-01T23:59:59.000Z

428

Construction, Qualification, and Low Rate Production Start-up...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

of a DC Bus Capacitor High Volume Manufacturing Facility with Capacity to Support 100,000 Electric Drive Vehicles Construction, Qualification, and Low Rate Production Start-up of a...

429

Cross section dependence of event rates at neutrino telescopes  

E-Print Network [OSTI]

We examine the dependence of event rates at neutrino telescopes on the neutrino-nucleon cross section for neutrinos with energy above 1 PeV, and contrast the results with those for cosmic ray experiments. Scaling of the ...

Marfatia, Danny; Seckel, D.; McKay, D. W.; Hussain, S.

2006-10-20T23:59:59.000Z

430

Pressure Normalization of Production Rates Improves Forecasting Results  

E-Print Network [OSTI]

. However, these new decline curve analysis (DCA) methods are still based only on production rate data, relying on the assumption of stable flowing pressure. Since this stabilized state is not reached rapidly in most cases, the applicability of these methods...

Lacayo Ortiz, Juan Manuel

2013-08-07T23:59:59.000Z

431

Materials Science Under Extreme Conditions of Pressure and Strain Rate  

E-Print Network [OSTI]

at Lawrence Livermore National Laboratory. I. INTRODUCTION HIGH-STRAIN-RATE materials dynamics and solid-state experiments to much higher pressures, P 103 GPa (10 Mbar), on the National Ignition Facility (NIF) laser

Zhigilei, Leonid V.

432

Characterization of biodegradation rates of separated diesel components  

E-Print Network [OSTI]

. Studies with complex mixtures, like whole fuels, have shown that hydrocarbons in petroleum do not follow a simple degradation sequence and the biodegradation rates of specific compounds vary among fuels (Elmendorf, 1994, Mulikins-Phillips and Stewart 1974...

Olson, Jennifer Jean

1997-01-01T23:59:59.000Z

433

THE UNIVERSITY OF RHODE ISLAND FRINGE BENEFIT AVERAGE RATE  

E-Print Network [OSTI]

THE UNIVERSITY OF RHODE ISLAND FRINGE BENEFIT AVERAGE RATE FY 2015 Allocation Cost or Classified.2% URI Budget & Financial Planning Office 9.17.14 Office:fringebenefits:office of sponsored projects: FY2015 Allocation #12;

Rhode Island, University of

434

Dose Rate Calculations for Rotary Mode Core Sampling Exhauster  

E-Print Network [OSTI]

This document provides the calculated estimated dose rates for three external locations on the Rotary Mode Core Sampling (RMCS) exhauster HEPA filter housing, per the request of Characterization Field Engineering.

Foust, D J

2000-01-01T23:59:59.000Z

435

Longshore sediment transport rate calculated incorporating wave orbital velocity fluctuations  

E-Print Network [OSTI]

Laboratory experiments were performed to study and improve longshore sediment transport rate predictions. Measured total longshore transport in the laboratory was approximately three times greater for plunging breakers than spilling breakers. Three...

Smith, Ernest Ray

2006-10-30T23:59:59.000Z

436

How Well Do Social Ratings Actually Measure Corporate Social Responsibility?*  

E-Print Network [OSTI]

environmental strengths, in contrast, do not accurately predict pollution levels or compliance violations. Levine Haas School of Business University of California at Berkeley 545 Student Services Building #1900 Responsibility? Abstract: Ratings of corporations' environmental activities and capabilities influence billions

Sadoulet, Elisabeth

437

adenoma detection rates: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Astrophysics (arXiv) Summary: The event rates for the direct detection of dark matter for various types of WIMPs are presented. In addition to the neutralino of SUSY...

438

affects detection rate: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Astrophysics (arXiv) Summary: The event rates for the direct detection of dark matter for various types of WIMPs are presented. In addition to the neutralino of SUSY...

439

Simplified motional heating rate measurements of trapped ions  

E-Print Network [OSTI]

We have measured motional heating rates of trapped atomic ions, a factor that can influence multi-ion quantum logic gate fidelities. Two simplified techniques were developed for this purpose: one relies on Raman sideband detection implemented with a single laser source, while the second is even simpler and is based on time-resolved fluorescence detection during Doppler recooling. We applied these methods to determine heating rates in a microfrabricated surface-electrode trap made of gold on fused quartz, which traps ions 40 microns above its surface. Heating rates obtained from the two techniques were found to be in reasonable agreement. In addition, the trap gives rise to a heating rate of 300 plus or minus 30 per second for a motional frequency of 5.25 MHz, substantially below the trend observed in other traps.

Epstein, R J; Leibfried, D; Wesenberg, J H; Bollinger, J J; Amini, J M; Blakestad, R B; Britton, J; Home, J P; Itano, W M; Jost, J D; Knill, E; Langer, C; Ozeri, R; Shiga, N; Wineland, D J

2007-01-01T23:59:59.000Z

440

astrophysical reaction rate: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Workshop on Thermonuclear Reaction Rates for Astrophysics Applications Computer Technologies and Information...

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

astrophysical reaction rates: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Workshop on Thermonuclear Reaction Rates for Astrophysics Applications Computer Technologies and Information...

442

activation reaction rate: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 On thermonuclear reaction rates Astrophysics (arXiv) Summary: Nuclear reactions govern major...

443

HEADLINE: BPA RAISES RATES TO BOLSTER FEDERAL POWER AND TRANSMISSION...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Teresa Waugh, 503-230-7536 Doug Johnson, 503-230-5840 or 503-230-5131 BPA adopts new wholesale power and transmission rates Increases needed to sustain system value Portland, Ore....

444

Figure 3. Production Schedules at Two Development Rates  

Gasoline and Diesel Fuel Update (EIA)

3. Production Schedules at Two Development Rates for the 95 Percent Probability of Recovering 5.7 Billion Barrels of Technically Recoverable Oil from the ANWR Coastal Plain of...

445

Reconciling leptogenesis with observable mu --> e gamma rates  

E-Print Network [OSTI]

We perform a detailed analysis of thermal leptogenesis in the framework of seesaw models which approximately conserve lepton number. These models are known to allow for large Yukawa couplings and a low seesaw scale in agreement with neutrino mass constraints, and hence to lead to large lepton flavour violating rates that can be probed experimentally. Although large Yukawa couplings lead to (inverse) decay rates much larger than the Hubble expansion rate, we show that the leptogenesis washout induced is generically small if the mass splitting between the right-handed neutrinos is small enough. As a result, large lepton flavour violating rates are compatible with successful leptogenesis. We emphasize that this scenario does not require any particular flavour structure. A small splitting is natural and radiatively stable in this context because it is protected by the lepton number symmetry.

Steve Blanchet; Thomas Hambye; Francois-Xavier Josse-Michaux

2010-02-15T23:59:59.000Z

446

Figure 5. Production Schedules at Two Development Rates for the...  

Gasoline and Diesel Fuel Update (EIA)

5. Production Schedules at Two Development Rates for the 5 Percent Probability of Recovering 16.0 Billion Barrels of Technically Recoverable Oil from the ANWR Coastal Plain of...

447

igure 4. Production Schedules at Two Development Rates for the...  

Gasoline and Diesel Fuel Update (EIA)

4. Production Schedules at Two Development Rates for the Statistical Mean of Recovering 10.3 Billion Barrels of Technically Recoverable Oil from the ANWR Coastal Plain of Alaska...

448

Escape Rates of the Hénon-Heiles System  

E-Print Network [OSTI]

A particle in the H\\'enon-Heiles potential can escape when its energy is above the threshold value $E_{th}={1/6}$. We report a theoretical study on the the escape rates near threshold. We derived an analytic formula for the escape rate as a function of energy by exploring the property of chaos. We also simulated the escaping process by following the motions of a large number of particles. Two algorithms are employed to solve the equations of motion. One is the Runge-Kutta-Fehlberg method, and another is a recently proposed fourth order symplectic method. Our simulations show the escape of H$\\mathrm{\\acute{e}}$non-Heiles system follows exponential laws. We extracted the escape rates from the time dependence of particle numbers in the H$\\mathrm{\\acute{e}}$non-Heiles potential. The extracted escape rates agree with the analytic result.

H. J. Zhao; M. L. Du

2007-01-15T23:59:59.000Z

449

Does anyone have access to 2012 average residential rates by...  

Open Energy Info (EERE)

Does anyone have access to 2012 average residential rates by utility company? I'm seeing an inconsistency between the OpenEI website and EIA 861 data set. Home > Groups > Utility...

450

Considering removing "Show Preview" button on utility rate form...  

Open Energy Info (EERE)

Rmckeel's picture Submitted by Rmckeel(297) Contributor 22 April, 2013 - 13:55 Utility Rates I'm considering removing the "Show Preview" button, since it does not work (javascript...

451

Water Exchange Rates and Molecular Mechanism around Aqueous Halide Ions  

SciTech Connect (OSTI)

Molecular dynamics simulations were performed to systematically study the water-exchange mechanism around aqueous chloride, bromide, and iodide ions. Transition state theory, Grote-Hynes theory, and the reactive flux method were employed to compute water exchange rates. We computed the pressure dependence of rate constants and the corresponding activation volumes to investigate the mechanism of the solvent exchange event. The activation volumes obtained using the transition state theory rate constants are negative for all the three anions, thus indicating an associative mechanism. Contrary to the transition state theory results, activation volumes obtained using rate constants from Grote-Hynes theory and the reactive flux method are positive, thus indicating a dissociative mechanism. The Division of Chemical Sciences, Geosciences, and Biosciences, Office of Basic Energy Sciences (BES), of the U.S. Department of Energy (DOE) funded this work. Battelle operates Pacific Northwest National Laboratory for DOE. The calculations were carried out using computer resources provided by BES.

Annapureddy, Harsha V.; Dang, Liem X.

2014-07-17T23:59:59.000Z

452

Austin Energy- Value of Solar Residential Rate (Texas)  

Broader source: Energy.gov [DOE]

Austin Energy, the municipal utility of Austin Texas, offers the Value of Solar rate for residential solar photovoltaic (PV) systems. The Value of Solar tariff, designed by Austin Energy and...

453

User’s Guide for Getter Rate Test System  

SciTech Connect (OSTI)

This User’s Guide describes the operation and maintenance of the Getter Rate Test System, including the mechanical equipment, instrumentation, and datalogger/computer components. The Getter Rate Test System includes equipment and instrumentation to conduct two getter rate tests simultaneously. The mechanical equipment comprises roughing and high-vacuum pumps, heated test chambers, standard hydrogen leaks, and associated piping and valves. Instrumentation includes thermocouples, pressure (vacuum) transducers, panel displays, analog-to-digital signal converter, and associated wiring. The datalogger/computer is a stand-alone computer with installed software to allow the user to record data input from the pressure transducers to data files and to calculate the getter rate from the data in an Excel® spreadsheet.

Elmore, Monte R.

2007-06-27T23:59:59.000Z

454

Acoustic measurement of the Deepwater Horizon Macondo well flow rate  

E-Print Network [OSTI]

On May 31, 2010, a direct acoustic measurement method was used to quantify fluid leakage rate from the Deepwater Horizon Macondo well prior to removal of its broken riser. This method utilized an acoustic imaging sonar and ...

Camilli, Richard

455

Comparison of proton and neutron carrier removal rates  

SciTech Connect (OSTI)

Displacement damage induced carrier removal rates for proton irradiations in the energy range 10-175 MeV were compared to 1 MeV equivalent neutrons using power MOSFETs as a test vehicle. The results showed that, within experimental error, the degradation mechanisms were qualitatively similar and the ratio of proton to neutron carrier removal rates as a function of proton energy correlate with a calculation based on nonionization energy loss in silicon. For exposures under junction bias, p-type silicon was found to have a smaller carrier removal rate for both proton and neutron irradiations, whereas, for n-type silicon, junction bias had little effect on the carrier removal rate.

Pease, R.L.; Enlow, E.W.; Dinger, G.L.; Marshall, P.

1987-12-01T23:59:59.000Z

456

Comparison of two different rating programs for sustainable homes  

E-Print Network [OSTI]

This thesis compares two different rating programs for sustainable homes; The Code for Sustainable Homes in the United Kingdom, and LEED for Homes in the United States. The comparison is both in general and with respect ...

Bjarnadottir, Margret Halla

2009-01-01T23:59:59.000Z

457

Basal melt rates beneath Whillans Ice Stream, West Antarctica  

E-Print Network [OSTI]

Basal water lubricates and enables the fast flow of the West Antarctic ice streams which exist under low gravitational driving stress. Identification of sources and rates of basal meltwater production can provide insight into the dynamics of ice...

Beem, Lucas H.; Jezek, Ken C.; Van Der Veen, C. J.

2010-08-05T23:59:59.000Z

458

Multi-rate flowing Wellbore electric conductivity logging method  

SciTech Connect (OSTI)

The flowing wellbore electric conductivity logging method involves the replacement of wellbore water by de-ionized or constant-salinity water, followed by constant pumping with rate Q, during which a series of fluid electric conductivity logs are taken. The logs can be analyzed to identify depth locations of inflow, and evaluate the transmissivity and electric conductivity (salinity) of the fluid at each inflow point. The present paper proposes the use of the method with two or more pumping rates. In particular it is recommended that the method be applied three times with pumping rates Q, Q /2, and 2Q. Then a combined analysis of the multi-rate data allows an efficient means of determining transmissivity and salinity values of all inflow points along a well with a confidence measure, as well as their inherent or far-field pressure heads. The method is illustrated by a practical example.

Tsang, Chin-Fu; Doughty, Christine

2003-04-22T23:59:59.000Z

459

Behavior of the Escape Rate Function in Hyperbolic Dynamical Systems  

E-Print Network [OSTI]

For a fixed initial reference measure, we study the dependence of the escape rate on the hole for a smooth or piecewise smooth hyperbolic map. First, we prove the existence and Holder continuity of the escape rate for systems with small holes admitting Young towers. Then we consider general holes for Anosov diffeomorphisms, without size or Markovian restrictions. We prove bounds on the upper and lower escape rates using the notion of pressure on the survivor set and show that a variational principle holds under generic conditions. However, we also show that the escape rate function forms a devil's staircase with jumps along sequences of regular holes and present examples to elucidate some of the difficulties involved in formulating a general theory.

Demers, Mark

2011-01-01T23:59:59.000Z

460

Behavior of the Escape Rate Function in Hyperbolic Dynamical Systems  

E-Print Network [OSTI]

principle holds under generic conditions. However, we also show that the escape rate function forms a devil's staircase with jumps along sequences of regular holes and present examples to elucidate some

Demers, Mark

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Subtypes of aggressive children based on parent ratings  

E-Print Network [OSTI]

The existence of subtypes of aggressive children based on their parents' ratings of their aggressive behavior was examined in this study. The subjects' raw scores from the Child Behavior Checklist (Achenbach & Edelbrock, 1991) were used to perform a...

Rodman, Jennifer K

2013-02-22T23:59:59.000Z

462

E-Print Network 3.0 - air ventilation rate Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of ventilation rates and CO2-concentrations... : ventilation rates, carbon dioxide, health effects, SBS-symptoms, air exchange rate, relative risks. 12;LBNL... not indicate...

463

High Pressure Burn Rate Measurements on an Ammonium Perchlorate Propellant  

SciTech Connect (OSTI)

High pressure deflagration rate measurements of a unique ammonium perchlorate (AP) based propellant are required to design the base burn motor for a Raytheon weapon system. The results of these deflagration rate measurements will be key in assessing safety and performance of the system. In particular, the system may experience transient pressures on the order of 100's of MPa (10's kPSI). Previous studies on similar AP based materials demonstrate that low pressure (e.g. P < 10 MPa or 1500 PSI) burn rates can be quite different than the elevated pressure deflagration rate measurements (see References and HPP results discussed herein), hence elevated pressure measurements are necessary in order understand the deflagration behavior under relevant conditions. Previous work on explosives have shown that at 100's of MPa some explosives will transition from a laminar burn mechanism to a convective burn mechanism in a process termed deconsolidative burning. The resulting burn rates that are orders-of-magnitude faster than the laminar burn rates. Materials that transition to the deconsolidative-convective burn mechanism at elevated pressures have been shown to be considerably more violent in confined heating experiments (i.e. cook-off scenarios). The mechanisms of propellant and explosive deflagration are extremely complex and include both chemical, and mechanical processes, hence predicting the behavior and rate of a novel material or formulation is difficult if not impossible. In this work, the AP/HTPB based material, TAL-1503 (B-2049), was burned in a constant volume apparatus in argon up to 300 MPa (ca. 44 kPSI). The burn rate and pressure were measured in-situ and used to calculate a pressure dependent burn rate. In general, the material appears to burn in a laminar fashion at these elevated pressures. The experiment was reproduced multiple times and the burn rate law using the best data is B = (0.6 {+-} 0.1) x P{sup (1.05{+-}0.02)} where B is the burn rate in mm/s and P is the pressure in units of MPa. Details of the experimental method, results and data analysis are discussed herein and briefly compared to other AP based materials that have been measured in this apparatus.

Glascoe, E A; Tan, N

2010-04-21T23:59:59.000Z

464

Ground-Based Remote Retrievals of Cumulus Entrainment Rates  

SciTech Connect (OSTI)

While fractional entrainment rates for cumulus clouds have typically been derived from airborne observations, this limits the size and scope of available data sets. To increase the number of continental cumulus entrainment rate observations available for study, an algorithm for retrieving them from ground-based remote sensing observations has been developed. This algorithm, called the Entrainment Rate In Cumulus Algorithm (ERICA), uses the suite of instruments at the Southern Great Plains (SGP) site of the United States Department of Energy's Atmospheric Radiation Measurement (ARM) Climate Research Facility as inputs into a Gauss-Newton optimal estimation scheme, in which an assumed guess of the entrainment rate is iteratively adjusted through intercomparison of modeled liquid water path and cloud droplet effective radius to their observed counterparts. The forward model in this algorithm is the Explicit Mixing Parcel Model (EMPM), a cloud parcel model that treats entrainment as a series of discrete entrainment events. A quantified value for measurement uncertainty is also returned as part of the retrieval. Sensitivity testing and information content analysis demonstrate the robust nature of this method for retrieving accurate observations of the entrainment rate without the drawbacks of airborne sampling. Results from a test of ERICA on three months of shallow cumulus cloud events show significant variability of the entrainment rate of clouds in a single day and from one day to the next. The mean value of 1.06 km-ą for the entrainment rate in this dataset corresponds well with prior observations and simulations of the entrainment rate in cumulus clouds.

Wagner, Timothy J.; Turner, David D.; Berg, Larry K.; Krueger, Steven K.

2013-07-26T23:59:59.000Z

465

Measuring rates of outdoor airflow into HVAC systems  

SciTech Connect (OSTI)

During the last few years, new technologies have been introduced for measuring the flow rates of outside air into HVAC systems. This document describes one particular technology for measuring these airflows, a system and a related protocol developed to evaluate this and similar measurement technologies under conditions without wind, and the results of our evaluations. We conclude that the measurement technology evaluated can provide a reasonably accurate measurement of OA flow rate over a broad range of flow, without significantly increasing airflow resistance.

Fisk, William J.; Faulkner, David; Sullivan, Douglas P.; Delp, Woody

2002-10-01T23:59:59.000Z

466

QCD Jet Rates with the Inclusive Generalized kt Algorithms  

E-Print Network [OSTI]

We derive generating functions, valid to next-to-double logarithmic accuracy, for QCD jet rates according to the inclusive forms of the kt, Cambridge/Aachen and anti-kt algorithms, which are equivalent at this level of accuracy. We compare the analytical results with jet rates and average jet multiplicities from the SHERPA event generator, and study the transition between Poisson-like and staircase-like behaviour of jet ratios.

Erik Gerwick; Ben Gripaios; Steffen Schumann; Bryan Webber

2013-04-15T23:59:59.000Z

467

QKD with finite resources: secret key rates via Rényi entropies  

E-Print Network [OSTI]

A realistic Quantum Key Distribution (QKD) protocol necessarily deals with finite resources, such as the number of signals exchanged by the two parties. We derive a bound on the secret key rate which is expressed as an optimization problem over R\\'enyi entropies. Under the assumption of collective attacks by an eavesdropper, a computable estimate of our bound for the six-state protocol is provided. This bound leads to improved key rates in comparison to previous results.

Silvestre Abruzzo; Hermann Kampermann; Markus Mertz; Dagmar Bruß

2011-05-27T23:59:59.000Z

468

Theoretical mass loss rates of cool main-sequence stars  

E-Print Network [OSTI]

We develop a model for the wind properties of cool main-sequence stars, which comprises their wind ram pressures, mass fluxes, and terminal wind velocities. The wind properties are determined through a polytropic magnetised wind model, assuming power laws for the dependence of the thermal and magnetic wind parameters on the stellar rotation rate. We use empirical data to constrain theoretical wind scenarios, which are characterised by different rates of increase of the wind temperature, wind density, and magnetic field strength. Scenarios based on moderate rates of increase yield wind ram pressures in agreement with most empirical constraints, but cannot account for some moderately rotating targets, whose high apparent mass loss rates are inconsistent with observed coronal X-ray and magnetic properties. For fast magnetic rotators, the magneto-centrifugal driving of the outflow can produce terminal wind velocities far in excess of the surface escape velocity. Disregarding this aspect in the analyses of wind ram pressures leads to overestimations of stellar mass loss rates. The predicted mass loss rates of cool main-sequence stars do not exceed about ten times the solar value. Our results are in contrast with previous investigations, which found a strong increase of the stellar mass loss rates with the coronal X-ray flux. Owing to the weaker dependence, we expect the impact of stellar winds on planetary atmospheres to be less severe and the detectability of magnetospheric radio emission to be lower then previously suggested. Considering the rotational evolution of a one solar-mass star, the mass loss rates and the wind ram pressures are highest during the pre-main sequence phase.

V. Holzwarth; M. Jardine

2006-11-14T23:59:59.000Z

469

Investigation of the rate sensitivity of pseudo relative permeabilities  

E-Print Network [OSTI]

of hypothetical reservoir stratifications were considered. Cross-sectional simulation runs were made using each stratification case for a range of waterflood injection rates and endpoint mobility ratios. Dynamic pseudo relative permeabilities were calculated... , These dynamic pseudo relative permeabilities were developed for those reservoirs that do not satisfy the assumptions of the vertical equilibrium or viscous-dominated pKr models. For waterflooding a stratified oil reservoir, fluid flow rate (velocity...

Brittain, Charles Finney

1986-01-01T23:59:59.000Z

470

K West basin isolation barrier leak rate test  

SciTech Connect (OSTI)

This document establishes the procedure for performing the acceptance test on the two isolation barriers being installed in K West basin. This acceptance test procedure shall be used to: First establish a basin water loss rate prior to installation of the two isolation barriers between the main basin and the discharge chute in K-Basin West. Second, perform an acceptance test to verify an acceptable leakage rate through the barrier seals.

Whitehurst, R.; McCracken, K.; Papenfuss, J.N.

1994-10-31T23:59:59.000Z

471

Bone Cancer Rates in Dinosaurs Compared with Modern Vertebrates  

E-Print Network [OSTI]

Data on the prevalence of bone cancer in dinosaurs is available from past radiological examination of preserved bones. We statistically test this data for consistency with rates extrapolated from information on bone cancer in modern vertebrates, and find that there is no evidence of a different rate. Thus, this test provides no support for a possible role of ionizing radiation in the K-T extinction event.

L. C. Natarajan; A. L. Melott; B. M. Rothschild; L. D. Martin

2007-10-16T23:59:59.000Z

472

Aspects of coal pyrogenation with high heating rates  

SciTech Connect (OSTI)

The present paper describes the conversion of different rank coals into coke of required quality, influenced by heating rate variation. The study has been made for romanian coals and the imported coals too. Theoretical aspects of the coking process kinetics with special practical applications are shown. In Romania, classical coke making technology involves some theoretical and practical problems because of the local coal supply, weak in coking coals. Petrographical methods, as a complementary source of information for coking mechanisms understanding were used, for blends with high content of weakly coking coals. The results reveal the importance of rank and petrographical composition determinations for complex blends making. The paper continues previous studies of coke making kinetics, influenced by heating rate variation. On the basis of the relationship between coal charge composition and coke structure, including its use in the blast furnace, the influence of an increase in heating rate on the structure of the coke produced from different rank and petrographical composition coals, was studied. The heating rates ranged between 3 and 40 C/min. The structural changes produced during pyrogenation were more evident for the heating rates: 3, 6, 10 and 40 C/min. Table 2 reveals the optical aspects of coke matrix and inertinitic inclusions evolution, that is, the differences in structure arrangement by changing the plastic phase characteristics due to the increase in the heating rate.

Panaitescu, C.; Barca, F. [Politehnica Univ., Bucharest (Romania); Predeanu, G.; Albastroiu, P. [Metallurgical Research Inst., Bucharest (Romania)

1994-12-31T23:59:59.000Z

473

Upscaling Calcite Growth Rates From the Mesoscale to the Macroscale  

SciTech Connect (OSTI)

Quantitative prediction of mineral reaction rates in the subsurface remains a daunting task partly because a key parameter for macroscopic models, the reactive site density, is poorly constrained. Here we report atomic force microscopy (AFM) measurements on the calcite surface of monomolecular step densities, treated as equivalent to the reactive site density, as a function of aqueous calcium-to-carbonate ratio and saturation index. Data for the obtuse step orientation are combined with existing step velocity measurements to generate a model that predicts overall macroscopic calcite growth rates. The model is quantitatively consistent with several published macroscopic rates under a range of alkaline solution conditions, particularly for two of the most comprehensive data sets without the need for additional fit parameters. The model reproduces peak growth rates and its functional form is simple enough to be incorporated into reactive transport or other macroscopic models designed for predictions in porous media. However, it currently cannot model equilibrium, pH effects, and may overestimate rates at high aqueous calcium-to-carbonate ratios. The discrepancies in rates at high calcium-to-carbonate ratios may be due to differences in pre-treatment, such as exposing the seed material to SI 1.0 to generate/develop growth hillocks, or other factors.

Bracco, Jacquelyn N [ORNL; Stack, Andrew G [ORNL; Steefel, Carl I [Lawrence Berkeley National Laboratory (LBNL)

2013-01-01T23:59:59.000Z

474

Solar rotation rate and its gradients during cycle 23  

E-Print Network [OSTI]

Available helioseismic data now span almost the entire solar activity cycle 23 making it possible to study solar-cycle related changes of the solar rotation rate in detail. In this paper we study how the solar rotation rate, in particular, the zonal flows change with time. In addition to the zonal flows that show a well known pattern in the solar convection zone, we also study changes in the radial and latitudinal gradients of the rotation rate, particularly in the shear layer that is present in the immediate sub-surface layers of the Sun. In the case of the zonal-flow pattern, we find that the band indicating fast rotating region close to the equator seems to have bifurcated around 2005. Our investigation of the rotation-rate gradients show that the relative variation in the rotation-rate gradients is about 20% or more of their average values, which is much larger than the relative variation in the rotation rate itself. These results can be used to test predictions of various solar dynamo models.

H. M. Antia; Sarbani Basu; S. M. Chitre

2008-05-22T23:59:59.000Z

475

Position paper -- Tank ventilation system design air flow rates  

SciTech Connect (OSTI)

The purpose of this paper is to document a project position on required ventilation system design air flow rates for the waste storage tanks currently being designed by project W-236A, the Multi-Function Waste Tank Facility (MWTF). The Title 1 design primary tank heat removal system consists of two systems: a primary tank vapor space ventilation system; and an annulus ventilation system. At the conclusion of Title 1 design, air flow rates for the primary and annulus ventilation systems were 960 scfm and 4,400 scfm, respectively, per tank. These design flow rates were capable of removing 1,250,000 Btu/hr from each tank. However, recently completed and ongoing studies have resulted in a design change to reduce the extreme case heat load to 700,000 Btu/hr. This revision of the extreme case heat load, coupled with results of scale model evaporative testing performed by WHC Thermal Hydraulics, allow for a reduction of the design air flow rates for both primary and annulus ventilation systems. Based on the preceding discussion, ICF Kaiser Hanford Co. concludes that the design should incorporate the following design air flow rates: Primary ventilation system--500 scfm maximum and Annulus ventilation system--1,100 scfm maximum. In addition, the minimum air flow rates in the primary and annulus ventilation systems will be investigated during Title 2 design. The results of the Title 2 investigation will determine the range of available temperature control using variable air flows to both ventilation systems.

Goolsby, G.K.

1995-01-04T23:59:59.000Z

476

One-Shot Percutaneous Ethanol Injection of Liver Tumors Under General Anesthesia: Preliminary Data on Efficacy and Complications  

SciTech Connect (OSTI)

Purpose: To verify the efficacy of ultrasound (US)-guided injection of large amounts of ethanol into large or multiple liver lesions, in a single session under general anesthesia (one-shot PEI) for percutaneous ablation of hepatic tumors. Methods: Twenty-nine patients (27 with 51 hepatocellular carcinoma (HCC) nodules on cirrhosis, diameter range 1.0<+>-<+>9.0 cm; two patients with a single metastasis from the gastroenteric tract, 5.0 and 9.0 cm, respectively, in diameter) were treated with one-shot PEI. Results: The total volume of alcohol delivered per patient ranged from 16 to 210 ml. Mean ethanol volume in all patients was 49 ml. Dynamic computed tomography (CT) examination showed complete necrosis in 41 of 50 lesions. Two patients died of hypovolemic shock due to massive upper gastrointestinal bleeding, 3 and 7 days, respectively, after the interventional procedure. All the remaining patients are alive (follow-up 5<+>-<+>14 months) except one who died of liver failure 5 months after. New HCC nodules occurred in six patients within 6 months and one intralesional relapse was recorded. Conclusion: In this preliminary experience, one-shot PEI is as effective in inducing liver tumor necrosis as traditional PEI; its advantages are shorter treatment time and the capability of treating larger and multiple liver lesions.

Giorgio, Antonio; Tarantino, Luciano; Francica, Giampiero; Mariniello, Nicola; Nuzzo, Antonio [Department of Infectious Diseases, Ospedale D. Cotugno, via Quagliariello, 1, Naples (Italy); Del Viscovo, Luca; Rotondo, Antonio [Department of Radiology, II Policlinico Universita Federico II, Via Pansini, 5 Naples (Italy)

1996-11-15T23:59:59.000Z

477

"Research to Improve the Efficacy of Captive Broodstock Programs and Advance Hatchery Reform Throughout the Columbia River Basin." [from the Abstract], 2007-2008 Annual Progress Report.  

SciTech Connect (OSTI)

This project was developed to conduct research to improve the efficacy of captive broodstock programs and advance hatchery reform throughout the Columbia river basin. The project has three objectives: (1) maintain adaptive life history characteristics in Chinook salmon, (2) improve imprinting in juvenile sockeye salmon, and (3) match wild phenotypes in Chinook and sockeye salmon reared in hatcheries. A summary of the results are as follows: Objective 1: Adult and jack Chinook salmon males were stocked into four replicate spawning channels at a constant density (N = 16 per breeding group), but different ratios, and were left to spawn naturally with a fixed number of females (N = 6 per breeding group). Adult males obtained primary access to females and were first to enter the nest at the time of spawning. Jack male spawning occurred primarily by establishing satellite positions downstream of the courting pair, and 'sneaking' into the nest at the time of spawning. Male dominance hierarchies were fairly stable and strongly correlated with the order of nest entry at the time of spawning. Spawning participation by jack and adult males is consistent with a negative frequency dependent selection model, which means that selection during spawning favors the rarer life history form. Results of DNA parentage assignments will be analyzed to estimate adult-to-fry fitness of each male. Objective 2: To determine the critical period(s) for imprinting for sockeye salmon, juvenile salmon were exposed to known odorants at key developmental stages. Molecular assessments of imprinting-induced changes in odorant receptor gene expression indicated that regulation of odorant expression is influenced by developmental status and odor exposure history. The results suggest that sockeye salmon are capable of imprinting to homing cues during the developmental periods that correspond to several of current release strategies employed as part of the Captive Broodstock program (specifically, planting eyed eggs, fall and smolt releases into the lake) appear to be appropriate for successful homing of sockeye in Redfish Lake. Also, our findings indicated that sockeye salmon were capable of olfactory imprinting at multiple life stages and over varying exposure durations. Fish exposed to odors just prior to smolting showed the strongest attraction to the imprinting odor arginine and this period corresponds to the period of highest plasma thyroxine levels and increased BAAR receptor mRNA in juveniles. Objective 3: Spring Chinook salmon were exposed to three different photoperiods and three feed rations at the button-up stage of development. Both photoperiod at emergence and ration post-ponding affected the number of males maturing at age one. Nearly 70% of the males in the early emergence and satiation fed group matured after the first year of rearing, while none of the fish reared on late emergence photoperiod (equivalent to emergence on May 1) matured during this time irrespective of ration treatment. Within the early emergence groups, reducing growth using ration (low or high) appeared to reduce the number of males maturing at age one from 70% to 40-50%. Maturation rates of fish that emerged in a photoperiod equivalent to mid-February (middle emergence) ranged from 10-25%. Together these data indicate that the seasonal timing of fry emergence and growth after ponding can alter life history patterns in spring Chinook salmon. The results imply that hatchery rearing practices that alter seasonal timing of fry emergence can have drastic effects on life history patterns in juvenile Chinook salmon. All three objectives are on-going and will result in recommendations (at the end of the FY 2009 performance period) to advance hatchery reforms in conventional and captive broodstock programs.

Berejikian, Barry A. [National Marine Fisheries Service

2009-04-08T23:59:59.000Z

478

Inverse bremsstrahlung heating rate for dense plasmas in laser fields  

SciTech Connect (OSTI)

We report a theoretical analysis of inverse bremsstrahlung heating rate in the eikonal approximation. The present analysis is performed for a dense plasma using the screened electron-ion interaction potential for the ion charge state Z{sub i} = 1 and for both the weak and strong plasma screening cases. We have also compared the eikonal results with the first Born approximation (FBA) [M. Moll et al., New J. Phys. 14, 065010 (2012)] calculation. We find that the magnitudes of inverse bremsstrahlung heating rate within the eikonal approximation (EA) are larger than the FBA values in the weak screening case (? = 0.03 a.u.) in a wide range of field strength for three different initial electron momenta (2, 3, and 4 a.u.). But for strong screening case (? = 0.3 a.u.), the heating rates predicted by the two approximations do not differ much after reaching their maximum values. Furthermore, the individual contribution of photoemission and photoabsorption processes to heating rate is analysed for both the weak and strong screening cases. We find that the single photoemission and photoabsorption rates are the same throughout the field strength while the multiphoton absorption process dominates over the multiphoton emission process beyond the field strength ? 4×10{sup 8} V/cm. The present study of the dependence of heating rate on the screening parameter ranging from 0.01 to 20 shows that whereas the heating rate predicted by the EA is greater than the FBA up to the screening parameter ? = 0.3 a.u., the two approximation methods yield results which are nearly identical beyond the above value.

Dey, R. [D-203, Samruddhi Residency, Motera, Ahmedabad-380009, Gujarat (India)] [D-203, Samruddhi Residency, Motera, Ahmedabad-380009, Gujarat (India); Roy, A. C. [School of Mathematical Sciences, Ramakrishna Mission Vivekananda University, Belur Math 711202, West Bengal (India)] [School of Mathematical Sciences, Ramakrishna Mission Vivekananda University, Belur Math 711202, West Bengal (India)

2013-07-15T23:59:59.000Z

479

Dynamic and rate-dependent yielding in model cohesive suspensions  

E-Print Network [OSTI]

An experimental system has been found recently, a coagulated CaCO3 suspension, that shows very different yield behaviour depending upon how it is tested and at what rate it is strained. At P\\'eclet number Pe > 1 it behaves as a simple Herschel Bulkley liquid, whereas at Pe it shows hysteresis and shear-banding and in the usual type of sweep used to measure flow curves in controlled stress mode routinely, it shows very erratic and irreproducible behaviour. All of these features can be attributed to a dependence of yield stress on rate of strain. Stress growth curves obtained from step strain-rate testing showed that the rate-dependence of the yield stress was a consequence of rate-dependent strain-softening. At very low Pe yield was cooperative and the yield strain was order-one, whereas as the Pe approached unity, the yield strain reduced to that needed to break interparticle bonds and the yield stress decayed to a minimal value. For example, at 40%v/v it dropped from ca. 200 Pa to It is suspected that the rich behaviour seen for the CaCO3 system could well be the rule rather than the exception for cohesive suspensions, the importance or otherwise of the rate dependence being a matter of scale or degree. If so, then the Herschel-Bulkley equation could usefully be generalised to read (in simple shear). The proposition that rate-dependent yield might be general, for cohesive suspensions at least, is amenable to further rigorous experimental testing by a range of means and along lines suggested.

Richard Buscall; Peter J Scales; Anthony D Stickland; Hui-En Teo; Tiara E Kusuma; Daniel R Lester

2014-10-01T23:59:59.000Z

480

Prediction of interest rate using CKLS model with stochastic parameters  

SciTech Connect (OSTI)

The Chan, Karolyi, Longstaff and Sanders (CKLS) model is a popular one-factor model for describing the spot interest rates. In this paper, the four parameters in the CKLS model are regarded as stochastic. The parameter vector ?{sup (j)} of four parameters at the (J+n)-th time point is estimated by the j-th window which is defined as the set consisting of the observed interest rates at the j?-th time point where j?j??j+n. To model the variation of ?{sup (j)}, we assume that ?{sup (j)} depends on ?{sup (j?m)}, ?{sup (j?m+1)},…, ?{sup (j?1)} and the interest rate r{sub j+n} at the (j+n)-th time point via a four-dimensional conditional distribution which is derived from a [4(m+1)+1]-dimensional power-normal distribution. Treating the (j+n)-th time point as the present time point, we find a prediction interval for the future value r{sub j+n+1} of the interest rate at the next time point when the value r{sub j+n} of the interest rate is given. From the above four-dimensional conditional distribution, we also find a prediction interval for the future interest rate r{sub j+n+d} at the next d-th (d?2) time point. The prediction intervals based on the CKLS model with stochastic parameters are found to have better ability of covering the observed future interest rates when compared with those based on the model with fixed parameters.

Ying, Khor Chia [Faculty of Computing and Informatics, Multimedia University, Jalan Multimedia, 63100 Cyberjaya, Selangor (Malaysia); Hin, Pooi Ah [Sunway University Business School, No. 5, Jalan Universiti, Bandar Sunway, 47500 Subang Jaya, Selangor (Malaysia)

2014-06-19T23:59:59.000Z

Note: This page contains sample records for the topic "luminaire efficacy rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Wholesale Power and Transmission Rate Projections 1993--2014 and Historical Wholesale Power Rates 1939--1992.  

SciTech Connect (OSTI)

This document provides a range of high, medium, and low case long-term projections of Bonneville Power Administration`s (BPA) wholesale power rates and a medium case long-term projection of BPA`s wheeling rates. These projections are produced annually by BPA. BPA uses these projections in long-term marketing, resource, transmission, and financial planning assessments. BPA`s projections also are used by public utility commissions, utilities, and others for a variety of planning purposes. The analysis used for these rate projections assumes that current rate making methodologies continue into the future and are further based on certain assumptions about regional loads, extra-regional markets, the costs of resources, BPA`s financial requirements, and the capability of the region`s power plants. While these projections are intended to address the overall uncertainty in rate levels, BPA realizes that the future will not reflect any specific set of assumptions. The rate projections in this document have been prepared prior to the Draft 1993 BPA Marketing Plan, the implementation of which is almost certain to push BPA away from any set of assumptions in this document. Therefore, this document can be thought of as representing the ``old`` BPA with its products and policies. It can be viewed as a starting point or reference point to measure the impact of the ``new`` BPA with its Marketing Plan, and the broader undertaking referred to as the Competitiveness Project.

US Bonneville Power Administration

1993-11-01T23:59:59.000Z

482

The Development of Career Maturity and Career Decision Self-Efficacy Among High-School Aged Youth Enrolled in the Texas 4-H Healthy Lifestyles Program  

E-Print Network [OSTI]

predictor of career immaturity. Similarly, numerous research studies have discovered a relationship between career decision-making self-efficacy and career indecision (Betz, Klein & Taylor, 1996; Choi et al., 2011; Taylor & Popma, 1990). Career maturity... suggest a career choice should be made by the end of the eighth grade (Hirschi, 2011), the expectation is typically that a career decision is made by the end of high school (Super, Savickas, & Super, 1996). This career decision making is often viewed...

Dodd, Courtney Felder

2013-08-01T23:59:59.000Z

483

Anthranilimide based glycogen phosphorylase inhibitors for the treatment of type 2 diabetes. Part 3: X-ray crystallographic characterization, core and urea optimization and in vivo efficacy  

SciTech Connect (OSTI)

Key binding interactions of the anthranilimide based glycogen phosphorylase a (GPa) inhibitor 2 from X-ray crystallography studies are described. This series of compounds bind to the AMP site of GP. Using the binding information the core and the phenyl urea moieties were optimized. This work culminated in the identification of compounds with single nanomolar potency as well as in vivo efficacy in a diabetic model.

Thomson, Stephen A.; Banker, Pierette; Bickett, D. Mark; Boucheron, Joyce A.; Carter, H. Luke; Clancy, Daphne C.; Cooper, Joel P.; Dickerson, Scott H.; Garrido, Dulce M.; Nolte, Robert T.; Peat, Andrew J.; Sheckler, Lauren R.; Sparks, Steven M.; Tavares, Francis X.; Wang, Liping; Wang, Tony Y.; Weiel, James E.; (GSKNC)

2009-05-15T23:59:59.000Z

484

Comparison of the Sputter Rates of Oxide Films Relative to the...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sputter Rates of Oxide Films Relative to the Sputter Rate of SiO2. Comparison of the Sputter Rates of Oxide Films Relative to the Sputter Rate of SiO2. Abstract: Because of the...

485

Ferrocarriles nacionales de Mexico: the existing rate structure for grain/soybean shipments and likely effect on freight rates as a result of railroad privatization in Mexico  

E-Print Network [OSTI]

's existing rate structure and, based on collected FNM Waybill data, regression models were estimated. Projected costs in the privatized railroad system were estimated to provide a lower bound estimate of rates. An upper bound estimate of rates was based...

Neyer, David McAlister

1994-01-01T23:59:59.000Z

486

Taxi Companies & NU Rates Winter 2011 Survey Note: These rates are subject to change; verify all rates directly with taxi company.  

E-Print Network [OSTI]

$51.00 + $1 extra per person $33.00 + $1 extra per person Northshore Cab* 2 ppl $35.00 3 ppl $42.00 4 ppl $48.00 2 ppl $60.00 3 ppl $72.00 4 ppl $80.00 $35.00 (request flat rate) (4 ppl min) Best Taxi Services $60.00 $75.00 $60.00 minivan only (by ordinance) (4 ppl min) 303 Taxi Services** $33

Shahriar, Selim

487

2007 Wholesale Power Rate Case Initial Proposal : Risk Analysis Study.  

SciTech Connect (OSTI)

The Federal Columbia River Power System (FCRPS), operated on behalf of the ratepayers of the PNW by BPA and other Federal agencies, faces many uncertainties during the FY 2007-2009 rate period. Among these uncertainties, the largest revolve around hydro conditions, market prices and river operations for fish recovery. In order to provide a high probability of making its U.S. Treasury payments, BPA performs a Risk Analysis as part of its rate-making process. In this Risk Analysis, BPA identifies key risks, models their relationships, and then analyzes their impacts on net revenues (total revenues less expenses). BPA subsequently evaluates in the ToolKit Model the Treasury Payment Probability (TPP) resulting from the rates, risks, and risk mitigation measures described here and in the Wholesale Power Rate Development Study (WPRDS). If the TPP falls short of BPA's standard, additional risk mitigation revenues, such as PNRR and CRAC revenues are incorporated in the modeling in ToolKit until the TPP standard is met. Increased wholesale market price volatility and six years of drought have significantly changed the profile of risk and uncertainty facing BPA and its stakeholders. These present new challenges for BPA in its effort to keep its power rates as low as possible while fully meeting its obligations to the U.S. Treasury. As a result, the risk BPA faces in not receiving the level of secondary revenues that have been credited to power rates before receiving those funds is greater. In addition to market price volatility, BPA also faces uncertainty around the financial impacts of operations for fish programs in FY 2006 and in the FY 2007-2009 rate period. A new Biological Opinion or possible court-ordered change to river operations in FY 2006 through FY 2009 may reduce BPA's net revenues included Initial Proposal. Finally, the FY 2007-2009 risk analysis includes new operational risks as well as a more comprehensive analysis of non-operating risks. Both the operational and non-operational risks will be described in Section 2.0 of this study. Given these risks, if rates are designed using BPA's traditional approach of only adding Planned Net Revenues for Risk (PNRR), power rates would need to recover a much larger ''risk premium'' to meet BPA's TPP standard. As an alternative to high fixed risk premiums, BPA is proposing a risk mitigation package that combines PNRR with a variable rate mechanism similar to the cost recovery adjustment mechanisms used in the FY 2002-2006 rate period. The proposed risk mitigation package is less expensive on a forecasted basis because the rates can be adjusted on an annual basis to respond to uncertain financial outcomes. BPA is also proposing a Dividend Distribution Clause (DDC) to refund reserves in excess of $800M to customers in the event net revenues in the next rate period exceed current financial forecasts.

United States. Bonneville Power Administration.

2005-11-01T23:59:59.000Z

488

PRECEDENTS FOR AUTHORIZATION OF CONTENTS USING DOSE RATE MEASUREMENTS  

SciTech Connect (OSTI)

For the transportation of Radioactive Material (RAM) packages, the requirements for the maximum allowed dose rate at the package surface and in its vicinity are given in Title 10 of the Code of Federal Regulations, Section 71.47. The regulations are based on the acceptable dose rates to which the public, workers, and the environment may be exposed. As such, the regulations specify dose rates, rather than quantity of radioactive isotopes and require monitoring to confirm the requirements are met. 10CFR71.47 requires that each package of radioactive materials offered for transportation must be designed and prepared for shipment so that under conditions normally incident to transportation the radiation level does not exceed 2 mSv/h (200 mrem/h) at any point on the external Surface of the package, and the transport index does not exceed 10. Before shipment, the dose rate of the package is determined by measurement, ensuring that it conforms to the regulatory limits, regardless of any analyses. This is the requirement for all certified packagings. This paper discusses the requirements for establishing the dose rates when shipping RAM packages and the precedents for meeting these requirements by measurement.

Abramczyk, G.; Bellamy, S.; Nathan, S.; Loftin, B.

2012-06-05T23:59:59.000Z

489

High frame rate CCD camera with fast optical shutter  

SciTech Connect (OSTI)

A high frame rate CCD camera coupled with a fast optical shutter has been designed for high repetition rate imaging applications. The design uses state-of-the-art microchannel plate image intensifier (MCPII) technology fostered/developed by Los Alamos National Laboratory to support nuclear, military, and medical research requiring high-speed imagery. Key design features include asynchronous resetting of the camera to acquire random transient images, patented real-time analog signal processing with 10-bit digitization at 40--75 MHz pixel rates, synchronized shutter exposures as short as 200pS, sustained continuous readout of 512 x 512 pixels per frame at 1--5Hz rates via parallel multiport (16-port CCD) data transfer. Salient characterization/performance test data for the prototype camera are presented, temporally and spatially resolved images obtained from range-gated LADAR field testing are included, an alternative system configuration using several cameras sequenced to deliver discrete numbers of consecutive frames at effective burst rates up to 5GHz (accomplished by time-phasing of consecutive MCPII shutter gates without overlap) is discussed. Potential applications including dynamic radiography and optical correlation will be presented.

Yates, G.J.; McDonald, T.E. Jr. [Los Alamos National Lab., NM (United States); Turko, B.T. [Lawrence Berkeley National Lab., CA (United States)

1998-09-01T23:59:59.000Z

490

Measuring Outdoor Air Intake Rates into Existing Building  

SciTech Connect (OSTI)

Practical and accurate technologies are needed for continuously measuring and controlling outdoor air (OA) intake rates in commercial building heating, ventilating, and air conditioning (HVAC) systems. This project evaluated two new measurement approaches. Laboratory experiments determined that OA flow rates were measurable with errors generally less than 10 percent using electronic air velocity probes installed between OA intake louver blades or at the outlet face of louvers. High accuracy was maintained with OA flow rates as low as 15 percent of the maximum for the louvers. Thus, with this measurement approach HVAC systems do not need separate OA intakes for minimum OA supply. System calibration parameters are required for each unique combination of louver type and velocity sensor location but calibrations are not necessary for each system installation. The research also determined that the accuracy of measuring OA flow rates with velocity probes located in the duct downstream of the intake louver was not improved by installing honeycomb airflow straighteners upstream of the probes. Errors varied with type of upstream louver, were as high as 100 percent, and were often greater than 25 percent. In conclusion, use of electronic air velocity probes between the blades of OA intake louvers or at the outlet face of louvers is a highly promising means of accurately measuring rates of OA flow into HVAC systems. The use of electronic velocity probes downstream of airflow straighteners is less promising, at least with the relatively small OA HVAC inlet systems employed in this research.

Fisk, William; Sullivan, Douglas; Cohen, Sebastian; Han, Hwataik

2009-04-16T23:59:59.000Z

491

RADIOLYTIC GAS PRODUCTION RATES OF POLYMERS EXPOSED TO TRITIUM GAS  

SciTech Connect (OSTI)

Data from previous reports on studies of polymers exposed to tritium gas is further analyzed to estimate rates of radiolytic gas production. Also, graphs of gas release during tritium exposure from ultrahigh molecular weight polyethylene (UHMW-PE), polytetrafluoroethylene (PTFE, a trade name is Teflon®), and Vespel® polyimide are re-plotted as moles of gas as a function of time, which is consistent with a later study of tritium effects on various formulations of the elastomer ethylene-propylene-diene monomer (EPDM). These gas production rate estimates may be useful while considering using these polymers in tritium processing systems. These rates are valid at least for the longest exposure times for each material, two years for UHMW-PE, PTFE, and Vespel®, and fourteen months for filled and unfilled EPDM. Note that the production “rate” for Vespel® is a quantity of H{sub 2} produced during a single exposure to tritium, independent of length of time. The larger production rate per unit mass for unfilled EPDM results from the lack of filler- the carbon black in filled EPDM does not produce H{sub 2} or HT. This is one aspect of how inert fillers reduce the effects of ionizing radiation on polymers.

Clark, E.

2013-08-31T23:59:59.000Z

492

Statistical Methods for Thermonuclear Reaction Rates and Nucleosynthesis Simulations  

E-Print Network [OSTI]

Rigorous statistical methods for estimating thermonuclear reaction rates and nucleosynthesis are becoming increasingly established in nuclear astrophysics. The main challenge being faced is that experimental reaction rates are highly complex quantities derived from a multitude of different measured nuclear parameters (e.g., astrophysical S-factors, resonance energies and strengths, particle and gamma-ray partial widths). We discuss the application of the Monte Carlo method to two distinct, but related, questions. First, given a set of measured nuclear parameters, how can one best estimate the resulting thermonuclear reaction rates and associated uncertainties? Second, given a set of appropriate reaction rates, how can one best estimate the abundances from nucleosynthesis (i.e., reaction network) calculations? The techniques described here provide probability density functions that can be used to derive statistically meaningful reaction rates and final abundances for any desired coverage probability. Examples are given for applications to s-process neutron sources, core-collapse supernovae, classical novae, and big bang nucleosynthesis.

Christian Iliadis; Richard Longland; Alain Coc; F. X. Timmes; Art E. Champagne

2014-09-19T23:59:59.000Z

493

Spin Exchange Rates in Electron-Hydrogen Collisions  

E-Print Network [OSTI]

The spin temperature of neutral hydrogen, which determines the 21 cm optical depth and brightness temperature, is set by the competition between radiative and collisional processes. In the high-redshift intergalactic medium, the dominant collisions are typically those between hydrogen atoms. However, collisions with electrons couple much more efficiently to the spin state of hydrogen than do collisions with other hydrogen atoms and thus become important once the ionized fraction exceeds ~1%. Here we compute the rate at which electron-hydrogen collisions change the hydrogen spin. Previous calculations included only S-wave scattering and ignored resonances near the n=2 threshold. We provide accurate results, including all partial wave terms through the F-wave, for the de-excitation rate at temperatures T_K =2 hydrogen levels becomes significant. Accurate electron-hydrogen collision rates at higher temperatures are not necessary, because collisional excitation in this regime inevitably produces Lyman-alpha photons, which in turn dominate spin exchange when T_K > 6200 K even in the absence of radiative sources. Our rates differ from previous calculations by several percent over the temperature range of interest. We also consider some simple astrophysical examples where our spin de-excitation rates are useful.

Steven Furlanetto; Michael Furlanetto

2006-08-02T23:59:59.000Z

494

The Wisconsin Home Energy Rating System: Final report  

SciTech Connect (OSTI)

The Wisconsin Home Energy Rating System (HERS) has been developed by the Department of Industry, Labor, and Human Relations under contract to the Department of Administration, Division of State Energy. The contract is funded by the US Department of Energy. The contract calls for development of a home energy rating system for 1- and 2-family dwellings, or adaptation of an already existing one, for one by the State of Wisconsin. The rating system was to be developed in the form of a simple rating tool which could be distributed for testing through municipal building inspectors. At the time it was distributed, results were to be returned and analyzed for accuracy and ease of use. Computer modeling was to be used to verify accuracy. An Ad Hoc Committee of people involved in the home market, in utilities, and in state government energy conservation agencies was established to advise DILHR and DSE staff on development of the rating system. (See Appendix G for a list of the Ad Hoc Committee members). The Ad Hoc Committee had a number of concerns about how the HERS might affect the real estate market, and whether it was worth doing. Their input helped set the direction the HERS was to aim at, and their advice, from several different angles of the home market, was very helpful to staff. This report will give some background on the process of development of the HERS and the Ad Hoc Committee, and then will give details of the technical development.

Ebisch, L.

1986-09-30T23:59:59.000Z

495

GM Project G.6 October 20008 -1 8. FATAL CRASH RATES  

E-Print Network [OSTI]

GM Project G.6 October 20008 - 1 8. FATAL CRASH RATES 8.1 MODELING FATALITY RATES FOR OLDER DRIVERS crash rate concepts we call "driver risk,"or the driver fatality rate. It is the fatality rate, per mile driver. The driver fatality risk rate is measured by dividing the number of older drivers in a given age

496

Gas temperature profiles at different flow rates and heating rates suffice to estimate kinetic parameters for fluidised bed combustion  

SciTech Connect (OSTI)

Experimental work on estimation kinetic parameters for combustion was conducted in a bench-scale fluidised bed (FB: 105x200mm). Combustion medium was obtained by using an electrical heater immersed into the bed. The ratio of heating rate (kJ/s) to molar flow rate of air (mol/s) regulated by a rheostat so that the heat of combustion (kJ/mol) can be synthetically obtained by an electrical power supply for relevant O{sub 2}-feedstock concentration (C{sub 0}). O{sub 2}-restriction ratio ({beta}) was defined by the ratio of O{sub 2}-feedstock concentration to O{sub 2}-air concentration (C{sub O{sub 2}-AIR}) at prevailing heating rates. Compressed air at further atmospheric pressure ({approx_equal}102.7kPa) entered the bed that was alumina particles (250{mu}m). Experiments were carried out at different gas flow rates and heating rates. FB was operated with a single charge of (1300g) particles for obtaining the T/T{sub 0} curves, and than C/C{sub 0} curves. The mathematical relationships between temperature (T) and conversion ratio (X) were expressed by combining total energy balance and mass balance in FB. Observed surface reaction rate constants (k{sub S}) was obtained from the combined balances and proposed model was also tested for these kinetic parameters (frequency factor: k{sub 0}, activation energy: E{sub A}, and reaction order: n) obtained from air temperature measurements. It was found that the model curves allow a good description of the experimental data. Thus, reaction rate for combustion was sufficiently expressed. (author)

Suyadal, Y. [Faculty of Engineering, Department of Chemical Engineering, Ankara University, 06100-Tandogan, Ankara (Turkey)

2006-07-15T23:59:59.000Z

497

Imaginary-time method for radiative capture reaction rate  

E-Print Network [OSTI]

We propose a new computational method for astrophysical reaction rate of radiative capture process. In the method, an evolution of a wave function is calculated along the imaginary-time axis which is identified as the inverse temperature. It enables direct evaluation of reaction rate as a function of temperature without solving any scattering problem. The method is tested for two-body radiative capture reaction, ${^{16}{\\rm O}}(\\alpha,\\gamma){^{20}{\\rm Ne}}$, showing that it gives identical results to that calculated by the ordinary procedure. The new method will be suited for calculation of triple-alpha radiative capture rate for which an explicit construction of the scattering solution is difficult.

Kazuhiro Yabana; Yasuro Funaki

2012-02-15T23:59:59.000Z

498

Renewal convergence rates and correlation decay for homogeneous pinning models  

E-Print Network [OSTI]

A class of discrete renewal processes with super-exponentially decaying inter-arrival distributions coincides with the infinite volume limit of general homogeneous pinning models in their localized phase. Pinning models are statistical mechanics systems to which a lot of attention has been devoted both for their relevance for applications and because they are solvable models exhibiting a non-trivial phase transition. The spatial decay of correlations in these systems is directly mapped to the speed of convergence to equilibrium for the associated renewal processes. We show that close to criticality, under general assumptions, the correlation decay rate, or the renewal convergence rate, coincides with the inter-arrival decay rate. We also show that, in general, this is false away from criticality. Under a stronger assumption on the inter-arrival distribution we establish a local limit theorem, capturing thus the sharp asymptotic behavior of correlations.

Giambattista Giacomin

2007-06-03T23:59:59.000Z

499

Rate constants for charge transfer across semiconductor-liquid interfaces  

SciTech Connect (OSTI)

Interfacial charge-transfer rate constants have been measured for n-type Si electrodes in contact with a series of viologen-based redox couples in methanol through analyses of the behavior of these junctions with respect to their current density versus potential and differential capacitance versus potential properties. The data allow evaluation of the maximum rate constant (and therefore the electronic coupling) for majority carriers in the solid as well as of the dependence of the rate constant on the driving force for transfer of delocalized electrons from the n-Si semiconducting electrode into the localized molecular redox species in the solution phase. The data are in good agreement with existing models of this interfacial electron transfer process and provide insight into the fundamental kinetic events underlying the use of semiconducting photoelectrodes in applications such as solar energy conversion. 23 refs., 3 figs.

Fajardo, A.M.; Lewis, N.S. [California Institute of Technology, Pasadena, CA (United States)

1996-11-08T23:59:59.000Z

500

Data attribute rating system. Report for May-September 1994  

SciTech Connect (OSTI)

Emission inventories are being developed by policy makers and scientists in an effort to study emission trends. Because of the great variety of data and range of techniques used, the inventories vary considerably in their reliability and accuracy. It is difficult to compare emission estimates for different sources where widely different methodologies have been employed in their development. An inventory rating system can help to compare and evaluate inventories. The paper outlines a new emission inventory rating concept--the Data Attribute Rating System (DARS)--that has been developed by the Air and Energy Engineering Research Laboratory (AEERL) of the U.S. Environmental Protection Agency (EPA). The system was developed to rank global inventories of emissions of greenhouse gases. However, the DARS can be applied to emission inventories of any component (gases, particulates, criteria pollutants, toxics, etc.) at any scale.

Beck, L.L.; Peer, R.L.; Bravo, L.A.; Yan, Y.

1995-04-01T23:59:59.000Z