Powered by Deep Web Technologies
Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Salem Electric - Residential, Commercial, and Industrial Efficiency Rebate  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Salem Electric - Residential, Commercial, and Industrial Efficiency Salem Electric - Residential, Commercial, and Industrial Efficiency Rebate Program Salem Electric - Residential, Commercial, and Industrial Efficiency Rebate Program < Back Eligibility Commercial Fed. Government Industrial Local Government Multi-Family Residential Nonprofit Residential State Government Savings Category Home Weatherization Commercial Weatherization Appliances & Electronics Sealing Your Home Ventilation Manufacturing Heating & Cooling Commercial Heating & Cooling Heat Pumps Commercial Lighting Lighting Water Heating Windows, Doors, & Skylights Maximum Rebate ENERGY Star Light Fixtures: Not to exceed 50% of the fixture cost Program Info State Oregon Program Type Utility Rebate Program Rebate Amount Refrigerators: $60 Freezers: $60 Clothes Washers: $60

2

Florida Nuclear Profile - St Lucie  

U.S. Energy Information Administration (EIA) Indexed Site

St Lucie" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor (percent)","Type","Commercial operation date","License expiration date"...

3

Salem Electric- Photovoltaic Rebate Program  

Energy.gov (U.S. Department of Energy (DOE))

Salem Electric offers a rebate to residential customers who install solar photovoltaic (PV) systems. Customers have the option of receiving a rebate or a [http://dsireusa.org/incentives/incentive...

4

EA-1946: Salem-Albany Transmission Line Rebuild Project; Polk...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6: Salem-Albany Transmission Line Rebuild Project; Polk, Benton, Marion, and Linn Counties, Oregon EA-1946: Salem-Albany Transmission Line Rebuild Project; Polk, Benton, Marion,...

5

Salem Electric | Open Energy Information  

Open Energy Info (EERE)

Electric Electric Jump to: navigation, search Name Salem Electric Place Oregon Utility Id 16555 Utility Location Yes Ownership C NERC Location WECC NERC WECC Yes Activity Transmission Yes Activity Buying Transmission Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Business service- With Demand Meter(V2) Commercial Business service-No Demand Meter Commercial Outdoor Field Lighting Lighting Residential Overhead Service Residential Residential Underground Service Residential Security Lighting Schedule 5A 175 MV Lighting Security Lighting Schedule 5A 250 MV Lighting

6

Salem Electric- Low-Interest Loan Program  

Energy.gov (U.S. Department of Energy (DOE))

Salem Electric residential customers participating in the Bright Way Solar or Photovoltaic programs are eligible for a loan with a 5% interest rate from a local bank. Customers must choose between...

7

Distributed Multisensor Fusion Lucy Y. Pao \\Lambda  

E-Print Network (OSTI)

Distributed Multisensor Fusion Lucy Y. Pao \\Lambda Northwestern University Evanston, IL 60208. The distributed fusion prob­ lem is more complex than the centralized fusion problem due to correlation across track estimates for the same object. We propose an approach for distributed sen­ sor fusion

Pao, Lucy Y.

8

Better Buildings Neighborhood Program: St. Lucie County, Florida  

NLE Websites -- All DOE Office Websites (Extended Search)

*Progress is reported through December 2012. Learn more about earlier program milestones Solar and Energy Loan Fund Location: St. Lucie County; Brevard County; City of Fellsmere;...

9

Salem Electric - Solar Water Heater Rebate | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Solar Water Heater Rebate Salem Electric - Solar Water Heater Rebate Eligibility Residential Savings For Heating & Cooling Solar Water Heating Program Information Oregon Program...

10

New Jersey Nuclear Profile - PSEG Salem Generating Station  

U.S. Energy Information Administration (EIA) Indexed Site

PSEG Salem Generating Station" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor (percent)","Type","Commercial operation date","License...

11

"1. PSEG Salem Generating Station","Nuclear","PSEG Nuclear LLC...  

U.S. Energy Information Administration (EIA) Indexed Site

Jersey" "1. PSEG Salem Generating Station","Nuclear","PSEG Nuclear LLC",2370 "2. PSEG Linden Generating Station","Gas","PSEG Fossil LLC",1587 "3. Bergen Generating...

12

St. Lucie County - Solar and Energy Loan Fund (SELF)(Florida...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lucie County - Solar and Energy Loan Fund (SELF)(Florida) St. Lucie County - Solar and Energy Loan Fund (SELF)(Florida) Eligibility Residential Savings For Home Weatherization...

13

EA-1946: Salem-Albany Transmission Line Rebuild Project; Polk, Benton, Marion, and Linn Counties, Oregon  

Energy.gov (U.S. Department of Energy (DOE))

Bonneville Power Administration is preparing an EA to assess the potential environmental impacts of the proposed rebuild of the 23.90-mile Salem-Albany No. 1 and 27.85-mile Salem-Albany No. 2 transmission lines between Salem and Albany, Oregon.

14

St. Lucie County, Florida: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Lucie County, Florida: Energy Resources Lucie County, Florida: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 27.3225563°, -80.543845° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":27.3225563,"lon":-80.543845,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

15

New Salem, North Dakota: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Salem, North Dakota: Energy Resources Salem, North Dakota: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 46.844999°, -101.4112545° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":46.844999,"lon":-101.4112545,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

16

Salem City Corporation (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

City Corporation (Utility Company) City Corporation (Utility Company) Jump to: navigation, search Name Salem City Corporation Place Utah Utility Id 16557 Utility Location Yes Ownership M NERC Location WECC NERC WECC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Commercial With Demand Commercial Commercial Without Demand Commercial Industrial Industrial Residential Residential Average Rates Residential: $0.0957/kWh Commercial: $0.0946/kWh Industrial: $0.0506/kWh References ↑ "EIA Form EIA-861 Final Data File for 2010 - File1_a" Retrieved from "http://en.openei.org/w/index.php?title=Salem_City_Corporation_(Utility_Company)&oldid=41147

17

MHK Projects/Salem Tidal Energy | Open Energy Information  

Open Energy Info (EERE)

Salem Tidal Energy Salem Tidal Energy < MHK Projects Jump to: navigation, search << Return to the MHK database homepage Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":5,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"500px","height":"350px","centre":false,"title":"","label":"","icon":"File:Aquamarine-marker.png","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.5739,"lon":-75.5438,"alt":0,"address":"","icon":"http:\/\/prod-http-80-800498448.us-east-1.elb.amazonaws.com\/w\/images\/7\/74\/Aquamarine-marker.png","group":"","inlineLabel":"","visitedicon":""}]}

18

City of Salem, Virginia (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

Virginia (Utility Company) Virginia (Utility Company) Jump to: navigation, search Name City of Salem Place Virginia Utility Id 16558 Utility Location Yes Ownership M NERC Location RFC NERC RFC Yes Activity Buying Transmission Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Schedule A.F.L.S. - T.O.D (Atheletic Field Lighting Service - Time-of Day) Lighting Schedule L.G.S. (Large General Service) Primary Industrial Schedule L.G.S. (Large General Service) Secondary Industrial Schedule L.P.S. - T.O.D. (Large Power Service - Time-of Day; Secondary) Industrial Schedule L.P.S. - T.O.D. (Large Power Service - Time-of day) Primary

19

VBA-0055 - In the Matter of Lucy Smith | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

VBA-0055 - In the Matter of Lucy Smith VBA-0055 - In the Matter of Lucy Smith VBA-0055 - In the Matter of Lucy Smith This Decision considers an Appeal of an Initial Agency Decision (IAD) issued on July 11, 2000, involving a Complaint filed by Lucy Smith (Smith or the Complainant) under the Department of Energy (DOE) Contractor Employee Protection Program, 10 C.F.R. Part 708. In her Complaint, Smith claims that her former employer, Westinghouse Savannah River Company (WSRC), a DOE contractor, terminated her employment during a reduction in force (RIF), and then failed to rehire her, in retaliation for making disclosures that are protected under Part 708. In the IAD, however, the Hearing Officer determined that WSRC had shown that it would have terminated the Complainant in the RIF, even in the absence of the protected

20

VWA-0041 - In the Matter of Lucy B. Smith | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

41 - In the Matter of Lucy B. Smith 41 - In the Matter of Lucy B. Smith VWA-0041 - In the Matter of Lucy B. Smith This Decision involves a whistleblower complaint filed by Lucy B. Smith (Smith) under the Department of Energy's (DOE) Contractor Employee Protection Program. From September 1973 to March 1997, Smith was employed as a chemist at the DOE's Savannah River Site (SRS) by various contractors, the most recent of which was Westinghouse Savannah River Company (WSRC). At the time of her termination, Smith worked at WSRC's Waste Management Laboratory. Smith alleges that in retaliation for making a number of health and safety disclosures WSRC terminated her pursuant to a January 1997 Reduction-in-Force (1/97 Rif) and subsequently failed to rehire her. vwa0041.pdf More Documents & Publications

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

EA-1874: Department of Energy Loan Guarantee to NRG Energy, Inc. for the St. Lucie County Plasma Energy Project  

Energy.gov (U.S. Department of Energy (DOE))

This EA evaluates the environmental impacts of a proposal to provide a DOE loan guarantee to NRG Energy, Inc., for the St. Lucie County Plasma Energy Project in Florida.

22

Supplement Analysis for the Transmission System Vegetation Management Program FEIS (DOE/EIS-0285/SA-141- SalemAlbany #2)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1- SalemAlbany #2) 1- SalemAlbany #2) Mark Newbill Natural Resource Specialist- TFE/Chemawa Proposed Action: Vegetation Management for the Salem Albany #2 115 kV transmission line from Salem Substation to Albany Substation. Location: The project is located in the BPA Eugene Region, within Marion, Polk, and Benton Counties, Oregon. Proposed by: Bonneville Power Administration (BPA). Description of the Proposal: BPA proposes to remove unwanted vegetation along the right-of- way, access roads, switch platforms, microwave beam paths, and around tower structures of the subject transmission line corridor that may impede the operation and maintenance of the identified transmission lines. BPA plans to conduct vegetation control with the goal of removing tall growing vegetation that is currently or will soon be a hazard to the transmission

23

Supplement Analysis for the Transmission System Vegetation Management Program FEIS (DOE/EIS-0285/SA-140- SalemAlbany1)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0- SalemAlbany1) 0- SalemAlbany1) Mark Newbill Natural Resource Specialist- TFE/Chemawa Proposed Action: Vegetation Management for the Salem Albany #1 115 kV transmission line from Salem Substation to Albany Substation. Location: The project is located in the BPA Eugene Region, Marion, Linn, and Benton County, Oregon. Proposed by: Bonneville Power Administration (BPA). Description of the Proposal: BPA proposes to remove unwanted vegetation along the right-of- way, access roads, switch platforms, microwave beam paths, and around tower structures of the subject transmission line corridor that may impede the operation and maintenance of the identified transmission lines. BPA plans to conduct vegetation control with the goal of removing tall growing vegetation that is currently or will soon be a hazard to the transmission

24

The Digital Geography Lab at Salem State University: The Evolution of One of the Oldest Educational Digital Geospatial Labs  

Science Conference Proceedings (OSTI)

Established in 1983, the Digital Geography Lab (DGL) at Salem State University (SSU) is one of the oldest higher-education digital spatial labs. This paper details the evolution of the DGL as well as its current status as one of the best computer labs ... Keywords: Computer Lab, Digital Geography Lab (DGL), GIS, Geography, Higher Education

Stephen S. Young; Kym Pappathanasi

2012-07-01T23:59:59.000Z

25

DOE/EIS-0285-SA-137: Supplement Analysis for the Transmission System Vegetation Management Program FEIS - Chemawa-Salem 1&2 (4/1/03)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7- Chemawa-Salem1&2) 7- Chemawa-Salem1&2) Mark Newbill Natural Resource Specialist- TFE/Chemawa Proposed Action: Vegetation Management for the Chemawa-Salem #1 115 kV and #2 230 kV transmission lines from Chemawa Substation to Salem Substation. Location: The project is located in the BPA Eugene Region, Marion County, Oregon. Proposed by: Bonneville Power Administration (BPA). Description of the Proposal: BPA proposes to remove unwanted vegetation along the right-of- way, access roads, switch platforms, and around tower structures of the subject transmission line corridor that may impede the operation and maintenance of the identified transmission lines. BPA plans to conduct vegetation control with the goal of removing tall growing vegetation that is currently or will soon be a hazard to the transmission line. BPA's overall goal is to have low-

26

Draft audit report, human factors engineering control room design review: Saint Lucie Nuclear Power Plant, Unit No. 2  

SciTech Connect

A human factors engineering preliminary design review of the Saint Lucie Unit 2 control room was performed at the site on August 3 through August 7, 1981. This design review was carried out by a team from the Human Factors Engineering Branch, Division of Human Factors Safety. This report was prepared on the basis of the HFEB's review of the applicant's Preliminary Design Assessment and the human factors engineering design review/audit performed at the site. The review team included human factors consultants from BioTechnology, Inc., Falls Church, Virginia, and from Lawrence Livermore National Laboratory (University of California), Livermore, California.

Peterson, L.R.; Lappa, D.A.; Moore, J.W.

1981-09-03T23:59:59.000Z

27

Analysis of Bioproducts from Ultra-Low Cost Biomass Processing Lucy Cheadle, Chemical Engineering, Washington University in St. Louis, MO  

E-Print Network (OSTI)

of biochar product to processing variations. Possible uses for biochar: · Natural coal replacement · Soil to processing plants. We are in the process of upgrading our blanket to one that is larger, more lightweight, easier to handle, and more air tight. For more information on the new blanket, see Burdette Birdinground

Collins, Gary S.

28

Life Cycle Management Plans for Hope Creek and Salem: Feedwater Heater and Moisture Separator Controls, Circuit Breakers, and Station Air System  

Science Conference Proceedings (OSTI)

As the electric power industry becomes more competitive, life cycle management (LCM) of systems, structures, and components (SSCs) becomes more important to keep nuclear power plants economically viable throughout their remaining licensed operating terms, whether 40 or 60 years. This report provides utilities with optimized LCM plans for three SSC types at PSEG's Salem and Hope Creek generating stations for use as a resource for LCM planning for these SSC types at other plants.

2003-09-30T23:59:59.000Z

29

"That the Truth of Things May Be More Fully Known:" Understanding the Role of Rhetoric in Shaping, Resolving, and Remembering the Salem Witchcraft Crisis  

E-Print Network (OSTI)

This project investigates how rhetorical texts influenced the witch trials that were held in Salem in 1691-1692, how rhetoric shaped the response to this event, and how rhetorical artifacts in the twentieth and twenty first centuries have shaped American public memory of the Salem witchcraft crisis. My analysis draws from three different chronological and rhetorical viewpoints. In Chapter II, I build upon work done by scholars such as McGee, White, and Charland in the area of constitutive rhetoric to address the question of how the witchcraft crisis was initiated and fueled rhetorically. Then, as my examination shifts to the rhetorical artifacts constructed immediately after the trials in Chapter III, I rely on the tradition of apologia, rooted in the ancient Greek understanding of stasis theory to understand how rhetorical elements were utilized by influential rhetors to craft a variety of different explanations for the crisis. And finally in Chapter IV, I draw from individuals such as Halbwachs, Kammen, Zelizer, and Bodnar, working in the cross-disciplinary field of public memory, to respond to the questions of how we remember the trials today and what impact these memories have on our understanding of the themes of witchcraft and witch hunting in contemporary American society. Therefore, this project uses the lens of rhetorical analysis to provide a method for examining and understanding how individuals, both in the seventeenth century and today, have engaged in the act of updating their reflections about this facet of American history.

Lemley, Lauren

2010-05-01T23:59:59.000Z

30

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING, AND COST DATA FOR MERCURY CONTROL SYSTEMS  

Science Conference Proceedings (OSTI)

PG&E NEG Salem Harbor Station Unit 1 was successfully tested for applicability of activated carbon injection as a mercury control technology. Test results from this site have enabled a thorough evaluation of mercury control at Salem Harbor Unit 1, including performance, estimated cost, and operation data. This unit has very high native mercury removal, thus it was important to understand the impacts of process variables on native mercury capture. The team responsible for executing this program included plant and PG&E headquarters personnel, EPRI and several of its member companies, DOE, ADA, Norit Americas, Inc., Hamon Research-Cottrell, Apogee Scientific, TRC Environmental Corporation, Reaction Engineering, as well as other laboratories. The technical support of all of these entities came together to make this program achieve its goals. Overall the objectives of this field test program were to determine the mercury control and balance-of-plant impacts resulting from activated carbon injection into a full-scale ESP on Salem Harbor Unit 1, a low sulfur bituminous-coal-fired 86 MW unit. It was also important to understand the impacts of process variables on native mercury removal (>85%). One half of the gas stream was used for these tests, or 43 MWe. Activated carbon, DARCO FGD supplied by NORIT Americas, was injected upstream of the cold side ESP, just downstream of the air preheater. This allowed for approximately 1.5 seconds residence time in the duct before entering the ESP. Conditions tested in this field evaluation included the impacts of the Selective Non-Catalytic Reduction (SNCR) system on mercury capture, of unburned carbon in the fly ash, of adjusting ESP inlet flue gas temperatures, and of boiler load on mercury control. The field evaluation conducted at Salem Harbor looked at several sorbent injection concentrations at several flue gas temperatures. It was noted that at the mid temperature range of 322-327 F, the LOI (unburned carbon) lost some of its ability to capture vapor phase Hg, however activated carbon performed relatively well. At the normal operating temperatures of 298-306 F, mercury emissions from the ESP were so low that both particulate and elemental mercury were ''not detected'' at the detection limits of the Ontario Hydro method for both baseline and injection tests. The oxidized mercury however, was 95% lower at a sorbent injection concentration of 10 lbs/MMacf compared with baseline emissions. When the flue gas temperatures were increased to a range of 343-347 F, mercury removal efficiencies were limited to fly ash LOI, operation of the SNCR system, and flue gas temperature on the native mercury capture without sorbent injection. Listed below are the main conclusions from this program: (1) SNCR on/off test showed no beneficial effect on mercury removal caused by the SNCR system. (2) At standard operating temperatures ({approx} 300 F), reducing LOI from 30-35% to 15-20% had minimal impact on Hg removal. (3) Increasing flue gas temperatures reduced Hg removal regardless of LOI concentrations at Salem Harbor (minimum LOI was 15%). Native mercury removal started to fall off at temperatures above 320 F. ACI effectiveness for mercury removal fell off at temperatures above 340 F. (4) Test method detection limits play an important role at Salem Harbor due to the low residual emissions. Examining the proposed MA rule, both the removal efficiency and the emission concentrations will be difficult to demonstrate on an ongoing basis. (5) Under tested conditions the baseline emissions met the proposed removal efficiency for 2006, but not the proposed emission concentration. ACI can meet the more-stringent 2012 emission limits, as long as measurement detection limits are lower than the Ontario Hydro method. SCEM testing was able to verify the low emissions. For ACI to perform at this level, process conditions need to match those obtained during testing.

Michael D. Durham

2004-10-01T23:59:59.000Z

31

Losses and Costs Associated with Coal vs. Natural Gas Firing at Hanes Dye and Finishing.  

E-Print Network (OSTI)

??Due to decreasing production and rising coal prices, the engineering and management staff at Hanes Dye and Finishing in Winston Salem, NC have been investigating (more)

Gibides, Justin Tyler

2009-01-01T23:59:59.000Z

32

Electricity Costs  

NLE Websites -- All DOE Office Websites (Extended Search)

Carbon Emissions Caps and the Impact of a Radical Change in Nuclear Electricity Costs journal International Journal of Energy Economics and Policy volume year month chapter...

33

Types of Costs Types of Cost Estimates  

E-Print Network (OSTI)

· Types of Costs · Types of Cost Estimates · Methods to estimate capital costs MIN E 408: Mining the equipment for reclamation? Types of Costs #12;· Marginal Cost: ­ Change in total cost ­ Any production process involves fixed and variable costs. As production increases/expands, fixed costs are unchanged, so

Boisvert, Jeff

34

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING, AND COST DATA FOR MERCURY CONTROL SYSTEMS  

SciTech Connect

PG&E NEG Salem Harbor Station Unit 1 was successfully tested for applicability of activated carbon injection as a mercury control technology. Test results from this site have enabled a thorough evaluation of mercury control at Salem Harbor Unit 1, including performance, estimated cost, and operation data. This unit has very high native mercury removal, thus it was important to understand the impacts of process variables on native mercury capture. The team responsible for executing this program included plant and PG&E headquarters personnel, EPRI and several of its member companies, DOE, ADA, Norit Americas, Inc., Hamon Research-Cottrell, Apogee Scientific, TRC Environmental Corporation, Reaction Engineering, as well as other laboratories. The technical support of all of these entities came together to make this program achieve its goals. Overall the objectives of this field test program were to determine the mercury control and balance-of-plant impacts resulting from activated carbon injection into a full-scale ESP on Salem Harbor Unit 1, a low sulfur bituminous-coal-fired 86 MW unit. It was also important to understand the impacts of process variables on native mercury removal (>85%). One half of the gas stream was used for these tests, or 43 MWe. Activated carbon, DARCO FGD supplied by NORIT Americas, was injected upstream of the cold side ESP, just downstream of the air preheater. This allowed for approximately 1.5 seconds residence time in the duct before entering the ESP. Conditions tested in this field evaluation included the impacts of the Selective Non-Catalytic Reduction (SNCR) system on mercury capture, of unburned carbon in the fly ash, of adjusting ESP inlet flue gas temperatures, and of boiler load on mercury control. The field evaluation conducted at Salem Harbor looked at several sorbent injection concentrations at several flue gas temperatures. It was noted that at the mid temperature range of 322-327 F, the LOI (unburned carbon) lost some of its ability to capture vapor phase Hg, however activated carbon performed relatively well. At the normal operating temperatures of 298-306 F, mercury emissions from the ESP were so low that both particulate and elemental mercury were ''not detected'' at the detection limits of the Ontario Hydro method for both baseline and injection tests. The oxidized mercury however, was 95% lower at a sorbent injection concentration of 10 lbs/MMacf compared with baseline emissions. When the flue gas temperatures were increased to a range of 343-347 F, mercury removal efficiencies were limited to <25%, even at the same sorbent injection concentration. Other tests examined the impacts of fly ash LOI, operation of the SNCR system, and flue gas temperature on the native mercury capture without sorbent injection. Listed below are the main conclusions from this program: (1) SNCR on/off test showed no beneficial effect on mercury removal caused by the SNCR system. (2) At standard operating temperatures ({approx} 300 F), reducing LOI from 30-35% to 15-20% had minimal impact on Hg removal. (3) Increasing flue gas temperatures reduced Hg removal regardless of LOI concentrations at Salem Harbor (minimum LOI was 15%). Native mercury removal started to fall off at temperatures above 320 F. ACI effectiveness for mercury removal fell off at temperatures above 340 F. (4) Test method detection limits play an important role at Salem Harbor due to the low residual emissions. Examining the proposed MA rule, both the removal efficiency and the emission concentrations will be difficult to demonstrate on an ongoing basis. (5) Under tested conditions the baseline emissions met the proposed removal efficiency for 2006, but not the proposed emission concentration. ACI can meet the more-stringent 2012 emission limits, as long as measurement detection limits are lower than the Ontario Hydro method. SCEM testing was able to verify the low emissions. For ACI to perform at this level, process conditions need to match those obtained during testing.

Michael D. Durham

2004-10-01T23:59:59.000Z

35

Types of Costs Types of Cost Estimates  

E-Print Network (OSTI)

05-1 · Types of Costs · Types of Cost Estimates · Methods to estimate capital costs MIN E 408) costs apply to those items that are consumed in production process and are roughly proportional to level in cash flow analysis and in the decision to use the equipment for reclamation? Types of Costs #12

Boisvert, Jeff

36

PAFC Cost Challenges  

NLE Websites -- All DOE Office Websites (Extended Search)

PAFC Cost Challenges Sridhar Kanuri Manager, PAFC Technology *Sridhar.Kanuri@utcpower.com 2 AGENDA Purecell 400 cost challenge Cost reduction opportunities Summary 3 PURECELL ...

37

Minimum Changeover Cost Arborescence  

E-Print Network (OSTI)

having minimum changeover cost, a cost that we now describe. ... We define the changeover cost at j, denoted by d(j), as the sum of the costs at j paid for each of ...

38

Salem, Utah: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

530105°, -111.673536° 530105°, -111.673536° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.0530105,"lon":-111.673536,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

39

Salem, Massachusetts: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

1954°, -70.8967155° 1954°, -70.8967155° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.51954,"lon":-70.8967155,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

40

Salem, Oklahoma: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

839908°, -95.9286085° 839908°, -95.9286085° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":35.3839908,"lon":-95.9286085,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Salem, Oregon: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

9428975°, -123.0350963° 9428975°, -123.0350963° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":44.9428975,"lon":-123.0350963,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

42

Salem, Ohio: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

008923°, -80.8567501° 008923°, -80.8567501° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.9008923,"lon":-80.8567501,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

43

Cost Study Manual  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

28, 2012 28, 2012 Cost Study Manual Executive Summary This Cost Study Manual documents the procedures for preparing a Cost Study to compare the cost of a contractor's employee benefits to the industry average from a broad-based national benefit cost survey. The annual Employee Benefits Cost Study Comparison (Cost Study) assists with the analysis of contractors' employee benefits costs. The Contracting Officer (CO) may require corrective action when the average benefit per capita cost or the benefit cost as a percent of payroll exceeds the comparator group by more than five percent. For example, if per capita benefit costs for the comparator group are $10,000 and the benefit costs as a percent of payroll for the comparator group are 20%, the threshold for the contractor's benefits as a

44

Liquefaction and Pipeline Costs  

NLE Websites -- All DOE Office Websites (Extended Search)

factors add 20 percent to liquefaction plant total installed cost 6 Distribution Pipeline Costs Collected historical Oil & Gas Journal data, and surveyed for current urban and...

45

Highly Insulating Windows - Cost  

NLE Websites -- All DOE Office Websites (Extended Search)

Cost Cost The following is an estimate of the cost effective incremental cost of highly-insulating windows (U-factor=0.20 Btu/hr-ft2-F) compared to regular ENERGY STAR windows (U-factor 0.35 Btu/hr-ft2-F). Energy savings from lower U-factors were simulated with RESFEN over an assumed useful window life of 25 years. To determine the maximum incremental cost at which highly-insulating windows would still be cost-effective, we used a formula used by many utility companies to calculate the cost of saved energy from energy efficiency programs, based on the programs' cost and savings. We turned this formula around so that the cost of saved energy equals the present energy prices in the studied locations, whereas the program cost (the incremental cost of the windows) is the dependent variable. By entering 5%

46

Transparent Cost Database | Transparent Cost Database  

Open Energy Info (EERE)

Hide data for this chart (-)Show data for this chart (+) Loading data... Transparent Cost Database Generation Showing: Historical Projections Year Published: Release mouse to...

47

INDEPENDENT COST REVIEW (ICR) and INDEPENDENT COST ESTIMATE ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

INDEPENDENT COST REVIEW (ICR) and INDEPENDENT COST ESTIMATE (ICE) Standard Operating Procedures INDEPENDENT COST REVIEW (ICR) and INDEPENDENT COST ESTIMATE (ICE) Standard Operating...

48

Early Station Costs Questionnaire  

NLE Websites -- All DOE Office Websites (Extended Search)

Early Station Costs Questionnaire Early Station Costs Questionnaire Marc Melaina Hydrogen Technologies and Systems Center Market Readiness Workshop February 16-17th, 2011 Washington, DC Questionnaire Goals * The Early Station Costs questionnaire provides an anonymous mechanism for organizations with direct experience with hydrogen station costs to provide feedback on current costs, near-term costs, economies of scale, and R&D priorities. * This feedback serves the hydrogen community and government agencies by increasing awareness of the status of refueling infrastructure costs National Renewable Energy Laboratory Innovation for Our Energy Future Questions for Market Readiness Workshop Attendees * Are these questions the right ones to be asking?

49

Low Cost, Durable Seal  

NLE Websites -- All DOE Office Websites (Extended Search)

Cost, Durable Seal Cost, Durable Seal George M. Roberts UTC Power Corporation February 14, 2007 This presentation does not contain any proprietary or confidential information 1 LOW COST, DURABLE SEAL Outline * Project Objective * Technical Approach * Timeline * Team Roles * Budget * Q&A 2 LOW COST, DURABLE SEAL Project Objective Develop advanced, low cost, durable seal materials and sealing techniques amenable to high volume manufacture of PEM cell stacks. DOE Targets/Goals/Objectives Project Goal Durability Transportation: 5,000 hr Stationary: 40,000 hr Durability Improve mechanical and chemical stability to achieve 40,000 hr of useful operating life. Low Cost Low Cost A material cost equivalent to or less than the cost of silicones in common use. 3 LOW COST, DURABLE SEAL

50

OOTW COST TOOLS  

Science Conference Proceedings (OSTI)

This document reports the results of a study of cost tools to support the analysis of Operations Other Than War (OOTW). It recommends the continued development of the Department of Defense (DoD) Contingency Operational Support Tool (COST) as the basic cost analysis tool for 00TWS. It also recommends modifications to be included in future versions of COST and the development of an 00TW mission planning tool to supply valid input for costing.

HARTLEY, D.S.III; PACKARD, S.L.

1998-09-01T23:59:59.000Z

51

Operations Cost Allocation Project  

NLE Websites -- All DOE Office Websites (Extended Search)

Operations Consolidation Project Operations Consolidation Project Operations Consolidation Project (OCP) Cost Allocation Presentation - September 20, 2011 OCP Cost Allocation Customer Presentation List of Acronyms OCP Cost Allocation Spreadsheets OCP Cost Allocation Customer Presentation - Questions and Answers - September 19 - 20, 2011 Additional Questions and Answers Customer Comments/Questions and Answers: Arizona Municipal Power Users Association Arizona Power Authority Central Arizona Project Colorado River Commission Colorado River Energy Distributors Association City of Gilbert, AZ Irrigation and Electrical Districts Association of Arizona Town of Marana, AZ City of Mesa, AZ Town of Wickenburg, AZ Western's Final Decision Regarding the Long-Term Cost Allocation Methodology for Operations Staff Costs

52

Minimum Cost Arborescences ?  

E-Print Network (OSTI)

In this paper, we analyze the cost allocation problem when a group of agents or nodes have to be connected to a source, and where the cost matrix describing the cost of connecting each pair of agents is not necessarily symmetric, thus extending the well-studied problem of minimum cost spanning tree games, where the costs are assumed to be symmetric. The focus is on rules which satisfy axioms representing incentive and fairness properties. We show that while some results are similar, there are also significant differences between the frameworks corresponding to symmetric and asymmetric cost matrices.

Bhaskar Dutta; Debasis Mishra; We Thank Daniel Granot; Anirban Kar; Herve Moulin For Comments

2011-01-01T23:59:59.000Z

53

Nuclear fuel cycle costs  

Science Conference Proceedings (OSTI)

The costs for the back-end of the nuclear fuel cycle, which were developed as part of the Nonproliferation Alternative Systems Assessment Program (NASAP), are presented. Total fuel cycle costs are given for the pressurized water reactor once-through and fuel recycle systems, and for the liquid-metal fast breeder reactor system. These calculations show that fuel cycle costs are a small part of the total power costs. For breeder reactors, fuel cycle costs are about half that of the present once-through system. The total power cost of the breeder reactor system is greater than that of light-water reactor at today's prices for uranium and enrichment.

Burch, W.D.; Haire, M.J.; Rainey, R.H.

1982-02-01T23:59:59.000Z

54

Hydrogen Threshold Cost Calculation  

NLE Websites -- All DOE Office Websites (Extended Search)

Program Record (Offices of Fuel Cell Technologies) Program Record (Offices of Fuel Cell Technologies) Record #: 11007 Date: March 25, 2011 Title: Hydrogen Threshold Cost Calculation Originator: Mark Ruth & Fred Joseck Approved by: Sunita Satyapal Date: March 24, 2011 Description: The hydrogen threshold cost is defined as the hydrogen cost in the range of $2.00-$4.00/gge (2007$) which represents the cost at which hydrogen fuel cell electric vehicles (FCEVs) are projected to become competitive on a cost per mile basis with the competing vehicles [gasoline in hybrid-electric vehicles (HEVs)] in 2020. This record documents the methodology and assumptions used to calculate that threshold cost. Principles: The cost threshold analysis is a "top-down" analysis of the cost at which hydrogen would be

55

Hydrogen Pathway Cost Distributions  

NLE Websites -- All DOE Office Websites (Extended Search)

Pathway Cost Distributions Pathway Cost Distributions Jim Uihlein Fuel Pathways Integration Tech Team January 25, 2006 2 Outline * Pathway-Independent Cost Goal * Cost Distribution Objective * Overview * H2A Influence * Approach * Implementation * Results * Discussion Process * Summary 3 Hydrogen R&D Cost Goal * Goal is pathway independent * Developed through a well defined, transparent process * Consumer fueling costs are equivalent or less on a cents per mile basis * Evolved gasoline ICE and gasoline-electric hybrids are benchmarks * R&D guidance provided in two forms * Evolved gasoline ICE defines a threshold hydrogen cost used to screen or eliminate options which can't show ability to meet target * Gasoline-electric hybrid defines a lower hydrogen cost used to prioritize projects for resource allocation

56

Documents: Cost Analysis  

NLE Websites -- All DOE Office Websites (Extended Search)

Analysis Search Documents: Search PDF Documents View a list of all documents Cost Analysis PDF Icon Summary of the Cost Analysis Report for the Long-term Management of Depleted UF6...

57

Reduce Oil Dependence Costs  

NLE Websites -- All DOE Office Websites (Extended Search)

Reduce Oil Dependence Costs U.S. Petroleum Use, 1970-2010 Nearly 40% of the oil we use is imported, costing us roughly 300 billion annually. Increased domestic oil production from...

58

Chemical Lifecycle Management Cost  

NLE Websites -- All DOE Office Websites (Extended Search)

Chemical Lifecycle Management Cost Presented by: J.M. Hieb, CH2M HILL Plateau Remediation Company CHPRC1204-04 Chemical Lifecycle Management Cost Everyone is trying to stretch a...

59

Cost Estimation Recommendations  

Science Conference Proceedings (OSTI)

...D.P. Hoult and C.L. Meador, Manufacturing Cost Estimating, Materials Selection and Design, Vol 20, ASM Handbook,

60

Power Plant Cycling Costs  

Science Conference Proceedings (OSTI)

This report provides a detailed review of the most up to date data available on power plant cycling costs. The primary objective of this report is to increase awareness of power plant cycling cost, the use of these costs in renewable integration studies and to stimulate debate between policymakers, system dispatchers, plant personnel and power utilities.

Kumar, N.; Besuner, P.; Lefton, S.; Agan, D.; Hilleman, D.

2012-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Commercial equipment cost database  

SciTech Connect

This report, prepared for DOE, Office of Codes and Standards, as part of the Commercial Equipment Standards Program at Pacific Northwest Laboratory, specifically addresses the equipment cost estimates used to evaluate the economic impacts of revised standards. A database including commercial equipment list prices and estimated contractor costs was developed, and through statistical modeling, estimated contractor costs are related to equipment parameters including performance. These models are then used to evaluate cost estimates developed by the ASHRAE 90.1 Standing Standards Project Committee, which is in the process of developing a revised ASHRAE 90.1 standard. The database will also be used to support further evaluation of the manufacturer and consumer impacts of standards. Cost estimates developed from the database will serve as inputs to economic modeling tools, which will be used to estimate these impacts. Preliminary results suggest that list pricing is a suitable measure from which to estimate contractor costs for commercial equipment. Models developed from these cost estimates accurately predict estimated costs. The models also confirm the expected relationships between equipment characteristics and cost. Cost models were developed for gas-fired and electric water heaters, gas-fired packaged boilers, and warm air furnaces for indoor installation. Because of industry concerns about the use of the data, information was not available for the other categories of EPAct-covered equipment. These concerns must be addressed to extend the analysis to all EPAct equipment categories.

Freeman, S.L.

1995-01-01T23:59:59.000Z

62

Methods | Transparent Cost Database  

Open Energy Info (EERE)

Methods Methods Disclaimer The data gathered here are for informational purposes only. Inclusion of a report in the database does not represent approval of the estimates by DOE or NREL. Levelized cost calculations DO NOT represent real world market conditions. The calculation uses a single discount rate in order to compare technology costs only. About the Cost Database For emerging energy technologies, a variety of cost and performance numbers are cited in presentations and reports for present-day characteristics and potential improvements. Amid a variety of sources and methods for these data, the Office of Energy Efficiency and Renewable Energy's technology development programs determine estimates for use in program planning. The Transparent Cost Database collects program cost and performance

63

Low cost MCFC anodes  

DOE Green Energy (OSTI)

This paper outlines a project, funded under a DOE SBIR grant, which tested a potentially lower cost method of manufacturing MCFC stack anodes and evaluated the feasibility of using the technology in the existing M-C Power Corp. manufacturing facility. The procedure involves adding activator salts to the anode tape casting slurry with the Ni and Cr or Al powders. Two different processes occur during heat treatment in a reducing environment: sintering of the base Ni structure, and alloying or cementation of the Cr or Al powders. To determine whether it was cost-effective to implement the cementation alloying manufacturing process, the M-C Power manufacturing cost model was used to determine the impact of different material costs and processing parameters on total anode cost. Cost analysis included equipment expenditures and facility modifications required by the cementation alloying process.

Erickson, D.S.

1996-12-31T23:59:59.000Z

64

What solar heating costs  

SciTech Connect

Few people know why solar energy systems cost what they do. Designers and installers know what whole packages cost, but rarely how much goes to piping, how much for labor and how much for the collectors. Yet one stands a better chance of controlling costs if one can compare where the money is going against where it should be going. A detailed Tennessee Valley Authority study of large solar projects shows how much each component contributes to the total bill.

Adams, J.A.

1985-05-01T23:59:59.000Z

65

Cost analysis guidelines  

Science Conference Proceedings (OSTI)

The first phase of the Depleted Uranium Hexafluoride Management Program (Program)--management strategy selection--consists of several program elements: Technology Assessment, Engineering Analysis, Cost Analysis, and preparation of an Environmental Impact Statement (EIS). Cost Analysis will estimate the life-cycle costs associated with each of the long-term management strategy alternatives for depleted uranium hexafluoride (UF6). The scope of Cost Analysis will include all major expenditures, from the planning and design stages through decontamination and decommissioning. The costs will be estimated at a scoping or preconceptual design level and are intended to assist decision makers in comparing alternatives for further consideration. They will not be absolute costs or bid-document costs. The purpose of the Cost Analysis Guidelines is to establish a consistent approach to analyzing of cost alternatives for managing Department of Energy`s (DOE`s) stocks of depleted uranium hexafluoride (DUF6). The component modules that make up the DUF6 management program differ substantially in operational maintenance, process-options, requirements for R and D, equipment, facilities, regulatory compliance, (O and M), and operations risk. To facilitate a consistent and equitable comparison of costs, the guidelines offer common definitions, assumptions or basis, and limitations integrated with a standard approach to the analysis. Further, the goal is to evaluate total net life-cycle costs and display them in a way that gives DOE the capability to evaluate a variety of overall DUF6 management strategies, including commercial potential. The cost estimates reflect the preconceptual level of the designs. They will be appropriate for distinguishing among management strategies.

Strait, R.S.

1996-01-10T23:59:59.000Z

66

CAES Updated Cost Assessment  

Science Conference Proceedings (OSTI)

Compressed Air Energy Storage Systems (CAES) for bulk energy storage applications have been receiving renewed interest. Increased penetration of large quantities of intermittent wind generation are requiring utilities to re-examine the cost and value of CAES systems. New second generation CAES cycles have been identified which offer the potential for lower capital and operating costs. This project was undertaken to update and summarize the capital and operating costs and performance features of second ge...

2008-12-23T23:59:59.000Z

67

Target Cost Management Strategy  

E-Print Network (OSTI)

Target cost management (TCM) is an innovation of Japanese management accounting system and by common sense has been considered with great interest by practitioners. Nowadays, TCM related

Okano, Hiroshi

1996-01-01T23:59:59.000Z

68

Cost Affordable Titanium IV  

Science Conference Proceedings (OSTI)

Jul 31, 2012 ... Enhancing the Cost Effectiveness of High Performance Titanium Alloy Component Production by Powder Metallurgy Evolution of Texture in...

69

Cost Effective Single Crystals  

Science Conference Proceedings (OSTI)

three relevant technologies, namely casting, alloy development and orientation measurement, developed by Rolls-Royce to enable the cost effective production.

70

Sharing Supermodular Costs  

E-Print Network (OSTI)

the costs collectively incurred by a group of cooperating agents. ..... Mixed integer programming formulations for production planning and scheduling prob- lems.

71

Petroleum well costs.  

E-Print Network (OSTI)

??This is the first academic study of well costs and drilling times for Australia?s petroleum producing basins, both onshore and offshore. I analyse a substantial (more)

Leamon, Gregory Robert

2006-01-01T23:59:59.000Z

72

COST REVIEW and ESTIMATING  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Programming Guide. OMB Circular A-94, Guidelines and Discount Rates for Benefit-Cost Analysis of Federal Programs, dated October 29, 1992 Page | 41 APPENDIX A ICRICE...

73

The Cost of Debt ?  

E-Print Network (OSTI)

We estimate firm-specific marginal cost of debt functions for a large panel of companies between 1980 and 2007. The marginal cost curves are identified by exogenous variation in the marginal tax benefits of debt. The location of a given companys cost of debt function varies with characteristics such as asset collateral, size, book-to-market, asset tangibility, cash flows, and whether the firm pays dividends. By integrating the area between benefit and cost functions we estimate that the equilibrium net benefit of debt is 3.5 % of asset value, resulting from an estimated gross benefit of debt of 10.4 % of asset value and an estimated cost of debt of 6.9%. We find that the cost of being overlevered is asymmetrically higher than the cost of being underlevered and that expected default costs constitute approximately half of the total ex ante cost of debt. We thank Rick Green (the Acting Editor), and an anonymous referee, Heitor Almeida, Ravi Bansal,

Jules H. Van Binsbergen; John R. Graham; Jie Yang

2010-01-01T23:59:59.000Z

74

Hydrogen and Infrastructure Costs  

NLE Websites -- All DOE Office Websites (Extended Search)

FUEL CELL TECHNOLOGIES PROGRAM Hydrogen and Infrastructure Costs Hydrogen Infrastructure Market Readiness Workshop Washington D.C. February 17, 2011 Fred Joseck U.S. Department of...

75

Reducing Energy Costs  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy expense is becoming increasingly dominant in the operating costs of high-performance computing (HPC) systems. At the same time, electricity prices vary significantly at...

76

Cost-Affordable Titanium III  

Science Conference Proceedings (OSTI)

Cost-Effective Production and Thermomechanical Consolidation of Titanium Alloy Powders Cost Affordable Developments in Titanium Technology and...

77

Software Cost Estimation  

E-Print Network (OSTI)

Software cost estimation is the process of predicting the effort required to develop a software system. Many estimation models have been proposed over the last 30 years. This paper provides a general overview of software cost estimation methods including the recent advances in the field. As a number of these models rely on a software size estimate as input, we first provide an overview of common size metrics. We then highlight the cost estimation models that have been proposed and used successfully. Models may be classified into 2 major categories: algorithmic and non-algorithmic. Each has its own strengths and weaknesses. A key factor in selecting a cost estimation model is the accuracy of its estimates. Unfortunately, despite the large body of experience with estimation models, the accuracy of these models is not satisfactory. The paper includes comment on the performance of the estimation models and description of several newer approaches to cost estimation.

Hareton Leung Zhang; Zhang Fan

2002-01-01T23:59:59.000Z

78

Transmission line capital costs  

Science Conference Proceedings (OSTI)

The displacement or deferral of conventional AC transmission line installation is a key benefit associated with several technologies being developed with the support of the U.S. Department of Energy`s Office of Energy Management (OEM). Previous benefits assessments conducted within OEM have been based on significantly different assumptions for the average cost per mile of AC transmission line. In response to this uncertainty, an investigation of transmission line capital cost data was initiated. The objective of this study was to develop a database for preparing preliminary estimates of transmission line costs. An extensive search of potential data sources identified databases maintained by the Bonneville Power Administration (BPA) and the Western Area Power Administration (WAPA) as superior sources of transmission line cost data. The BPA and WAPA data were adjusted to a common basis and combined together. The composite database covers voltage levels from 13.8 to 765 W, with cost estimates for a given voltage level varying depending on conductor size, tower material type, tower frame type, and number of circuits. Reported transmission line costs vary significantly, even for a given voltage level. This can usually be explained by variation in the design factors noted above and variation in environmental and land (right-of-way) costs, which are extremely site-specific. Cost estimates prepared from the composite database were compared to cost data collected by the Federal Energy Regulatory Commission (FERC) for investor-owned utilities from across the United States. The comparison was hampered because the only design specifications included with the FERC data were voltage level and line length. Working within this limitation, the FERC data were not found to differ significantly from the composite database. Therefore, the composite database was judged to be a reasonable proxy for estimating national average costs.

Hughes, K.R.; Brown, D.R.

1995-05-01T23:59:59.000Z

79

Lookin g for data personnel costs, indirect costs, equipment costs  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Negotiating Group Question/Answer Sessions November 19, 2009 Q: What happens now? A: The negotiation process starts tomorrow [November 20, 2009], when DOE will be sending the Awardees an e-mail with information about which website to go to for clarification and direction, information from the Office of Civil Rights, and answers to some of the questions that came up in the meeting. DOE will be gathering information about the questions concerning cyber requirements, metrics, and reporting requirements and will be getting back to the awardees about those issues the week after Thanksgiving. We have done a review of the budgets, and emails will be sent giving opportunities to address any issues. We will also re-review technical and cost proposals.

80

cost | OpenEI  

Open Energy Info (EERE)

cost cost Dataset Summary Description The following data-set is for a benchmark residential home for all TMY3 locations across all utilities in the US. The data is indexed by utility service provider which is described by its "unique" EIA ID ( Source National Renewable Energy Laboratory Date Released April 05th, 2012 (2 years ago) Date Updated April 06th, 2012 (2 years ago) Keywords AC apartment CFL coffeemaker Computer cooling cost demand Dishwasher Dryer Furnace gas HVAC Incandescent Laptop load Microwave model NREL Residential television tmy3 URDB Data text/csv icon Residential Cost Data for Common Household Items (csv, 14.5 MiB) Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage Frequency Annually Time Period License License Open Data Commons Public Domain Dedication and Licence (PDDL)

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Vehicle Cost Calculator  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Electric Plug-in Hybrid Electric Natural Gas (CNG) Flex Fuel (E85) Biodiesel (B20) Next Vehicle Cost Calculator U.S. Department of Energy Energy Efficiency and Renewable Energy...

82

COSTS OF NUCLEAR POWER  

SciTech Connect

The discussion on the costs of nuclear power from stationary plants, designed primarily for the generation of electricity. deals with those plants in operation, being built, or being designed for construction at an early date. An attempt is made to consider the power costs on the basis of consistent definitions and assumptions for the various nuclear plants and for comparable fossil-fuel plants. Information on several new power reactor projects is included. (auth)

1961-01-01T23:59:59.000Z

83

Roadway Improvement Project Cost Allocation  

E-Print Network (OSTI)

Roadway Improvement Project Cost Allocation CTS 21st Annual Transportation Research Conference costs #12;Potential Applications · Roadway Project Feasibility Studies ­ Identified potential roadway infrastructure improvement ­ Documentation of estimated project costs ­ Determine property assessments

Minnesota, University of

84

Wind Electrolysis: Hydrogen Cost Optimization  

NLE Websites -- All DOE Office Websites (Extended Search)

which needs to be 44% or better along with relatively high wind speeds. Along with low production costs, however, delivery and storage costs will also factor into the final cost...

85

Power Plant Cycling Costs  

NLE Websites -- All DOE Office Websites (Extended Search)

Power Plant Cycling Costs Power Plant Cycling Costs April 2012 N. Kumar, P. Besuner, S. Lefton, D. Agan, and D. Hilleman Intertek APTECH Sunnyvale, California NREL Technical Monitor: Debra Lew Subcontract Report NREL/SR-5500-55433 July 2012 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 15013 Denver West Parkway Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract No. DE-AC36-08GO28308 Power Plant Cycling Costs April 2012 N. Kumar, P. Besuner, S. Lefton, D. Agan, and D. Hilleman Intertek APTECH Sunnyvale, California NREL Technical Monitor: Debra Lew Prepared under Subcontract No. NFT-1-11325-01

86

INDEPENDENT COST REVIEW (ICR)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

COST REVIEW (ICR) COST REVIEW (ICR) and INDEPENDENT COST ESTIMATE (ICE) STANDARD OPERATING PROCEDURES (SOP) Revision 1 DEPARTMENT OF ENERGY (DOE) OFFICE OF ACQUISITION AND PROJECT MANAGEMENT (OAPM) September 2013 SUMMARY OF UPDATES: This revision includes the following significant changes since the December 2011 SOP release: 1. The original SOP discussed how an EIR and an ICE could be executed in tandem, but since we are no longer advocating this approach the ICE process has been completely separated from the EIR process and references to EIRs have been removed. 2. Section 1 adds a reference to Public Law 2055 reflecting that we must now, as a matter of law, perform an ICE at CD-3 for projects with a TPC over $100 million. 3. Section 2 notes that DOE Programs must now pay for ICRs and ICEs and reflects that PARS II must be

87

INDEPENDENT COST REVIEW (ICR)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

COST REVIEW (ICR) COST REVIEW (ICR) and INDEPENDENT COST ESTIMATE (ICE) STANDARD OPERATING PROCEDURES (SOP) Revision 1 DEPARTMENT OF ENERGY (DOE) OFFICE OF ACQUISITION AND PROJECT MANAGEMENT (OAPM) September 2013 SUMMARY OF UPDATES: This revision includes the following significant changes since the December 2011 SOP release: 1. The original SOP discussed how an EIR and an ICE could be executed in tandem, but since we are no longer advocating this approach the ICE process has been completely separated from the EIR process and references to EIRs have been removed. 2. Section 1 adds a reference to Public Law 2055 reflecting that we must now, as a matter of law, perform an ICE at CD-3 for projects with a TPC over $100 million. 3. Section 2 notes that DOE Programs must now pay for ICRs and ICEs and reflects that PARS II must be

88

Production Cost Optimization Assessments  

Science Conference Proceedings (OSTI)

The benefits of improved thermal performance of coal-fired power plants continue to grow, as the costs of fuel rise and the prospect of a carbon dioxide cap and trade program looms on the horizon. This report summarizes the efforts to date of utilities committed to reducing their heat rate by 1.0% in the Production Cost Optimization (PCO) Project. The process includes benchmarking of plant thermal performance using existing plant data and a site-specific performance appraisal. The appraisal determines po...

2008-12-11T23:59:59.000Z

89

Low Cost, Durable Seal  

SciTech Connect

Seal durability is critical to achieving the 2010 DOE operational life goals for both stationary and transportation PEM fuel cell stacks. The seal material must be chemically and mechanically stable in an environment consisting of aggressive operating temperatures, humidified gases, and acidic membranes. The seal must also be producible at low cost. Currentlyused seal materials do not meet all these requirements. This project developed and demonstrated a high consistency hydrocarbon rubber seal material that was able to meet the DOE technical and cost targets. Significant emphasis was placed on characterization of the material and full scale molding demonstrations.

Roberts, George; Parsons, Jason; Friedman, Jake

2010-12-17T23:59:59.000Z

90

Service Provider Competition: Delay Cost Structure, Segmentation, and Cost Advantage  

Science Conference Proceedings (OSTI)

We model competition between two providers who serve delay-sensitive customers. We compare a generalized delay cost structure, where a customer's delay cost depends on her service valuation, with the traditional additive delay cost structure, where the ... Keywords: delay cost structure, service competition, value-based market segmentation

Maxim Afanasyev; Haim Mendelson

2010-04-01T23:59:59.000Z

91

Long-run marginal costs lower than average costs  

SciTech Connect

The thesis of this article is that the long-run marginal costs of electricity are not always greater than the present average costs, as is often assumed. As long as short-run costs decrease with new plant additions, the long-run marginal cost is less than long-run average cost. When average costs increase with new additions, long-run marginal costs are greater than long-run average costs. The long-run marginal costs of a particular utility may be less than, equal to, or greater than its long-run average costs - even with inflation present. The way to determine which condition holds for a given utility is to estimate costs under various combinations of assumptions: probable load growth, zero load growth, and load growth greater than expected; and changes in load factor with attendant costs. Utilities that can demonstrate long-run marginal costs lower than long-run average costs should be encouraged to build plant and increase load, for the resulting productivity gains and slowing of inflation. Utilities that face long-run marginal costs greater than long-run average costs should discourage growth in sales through any available means.

Hunter, S.R.

1980-01-03T23:59:59.000Z

92

Heliostat cost reduction study.  

DOE Green Energy (OSTI)

Power towers are capable of producing solar-generated electricity and hydrogen on a large scale. Heliostats are the most important cost element of a solar power tower plant. Since they constitute {approx} 50% of the capital cost of the plant it is important to reduce heliostat cost as much as possible to improve the economic performance of power towers. In this study we evaluate current heliostat technology and estimate a price of $126/m{sup 2} given year-2006 materials and labor costs for a deployment of {approx}600 MW of power towers per year. This 2006 price yields electricity at $0.067/kWh and hydrogen at $3.20/kg. We propose research and development that should ultimately lead to a price as low as $90/m{sup 2}, which equates to $0.056/kWh and $2.75/kg H{sup 2}. Approximately 30 heliostat and manufacturing experts from the United States, Europe, and Australia contributed to the content of this report during two separate workshops conducted at the National Solar Thermal Test Facility.

Jones, Scott A.; Lumia, Ronald. (University of New Mexico, Albuquerque, NM); Davenport, Roger (Science Applications International Corporation, San Diego, CA); Thomas, Robert C. (Advanced Thermal Systems, Centennial, CO); Gorman, David (Advanced Thermal Systems, Larkspur, CO); Kolb, Gregory J.; Donnelly, Matthew W.

2007-06-01T23:59:59.000Z

93

Estimating decommissioning costs: The 1994 YNPS decommissioning cost study  

Science Conference Proceedings (OSTI)

Early this year, Yankee Atomic Electric Company began developing a revised decommissioning cost estimate for the Yankee Nuclear Power Station (YNPS) to provide a basis for detailed decommissioning planning and to reflect slow progress in siting low-level waste (LLW) and spent-nuclear-fuel disposal facilities. The revision also reflects the need to change from a cost estimate that focuses on overall costs to a cost estimate that is sufficiently detailed to implement decommissioning and identify the final cost of decommissioning.

Szymczak, W.J.

1994-12-31T23:59:59.000Z

94

Percent of 2010 Luminaire Cost LED Luminaire Cost  

E-Print Network (OSTI)

LEDs promise to change the world, and few doubt that they will, but a key limiter to more rapid adoption is the cost of the LED themselves. The cost breakdown of LED luminaires vary, but it is safe to put the cost of the LED at around 25% to 40 % of the total luminaire cost. It is projected to remain a significant cost of the total luminaire for many years.

unknown authors

2012-01-01T23:59:59.000Z

95

costs | OpenEI  

Open Energy Info (EERE)

7 7 Varnish cache server costs Dataset Summary Description This dataset represents a historical repository of all the numerical data from the smartgrid.gov website condensed into spreadsheets to enable analysis of the data. Below are a couple of things worth noting: Source Smartgrid.gov Date Released March 04th, 2013 (11 months ago) Date Updated March 04th, 2013 (11 months ago) Keywords AMI costs distribution smart grid transmission Data application/vnd.openxmlformats-officedocument.spreadsheetml.sheet icon SmartGrid.gov Quarterly Data Summary 4Q12 (xlsx, 112.1 KiB) application/vnd.openxmlformats-officedocument.spreadsheetml.sheet icon SmartGrid.gov Quarterly Data Summary 3Q12 (xlsx, 107.9 KiB) application/vnd.openxmlformats-officedocument.spreadsheetml.sheet icon SmartGrid.gov Quarterly Data Summary 2Q12 (xlsx, 111.9 KiB)

96

Geothermal probabilistic cost study  

DOE Green Energy (OSTI)

A tool is presented to quantify the risks of geothermal projects, the Geothermal Probabilistic Cost Model (GPCM). The GPCM model is used to evaluate a geothermal reservoir for a binary-cycle electric plant at Heber, California. Three institutional aspects of the geothermal risk which can shift the risk among different agents are analyzed. The leasing of geothermal land, contracting between the producer and the user of the geothermal heat, and insurance against faulty performance are examined. (MHR)

Orren, L.H.; Ziman, G.M.; Jones, S.C.; Lee, T.K.; Noll, R.; Wilde, L.; Sadanand, V.

1981-08-01T23:59:59.000Z

97

Cost Study Manual | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cost Study Manual Cost Study Manual Update 62912. Memo regarding Cost Study Manual Cost Study Manual More Documents & Publications Technical Standards, Newsletter-June 1999 Build...

98

Hydrogen Refueling Station Costs in Shanghai  

E-Print Network (OSTI)

E. Hydrogen Supply: Cost Estimate for Hydrogen Pathways -costs are compared with cost estimates of similar stationsHydrogen Supply: Cost Estimate for Hydrogen Pathways-Scoping

Weinert, Jonathan X.; Shaojun, Liu; Ogden, J; Jianxin, Ma

2006-01-01T23:59:59.000Z

99

Pennsylvania life cycle costing manual  

SciTech Connect

Until the 1970s, it was commonplace for institutions and governments to purchase equipment based on lowest initial (first) costs. Recurring costs such as operational, maintenance, and energy costs often were not considered in the purchase decision. If an agency wanted to buy something, it published specifications and requested bids from several manufacturers. Often, the lowest bidder who met the specifications won the job, with no consideration given to the economic life of the equipment or yearly recurring costs such as energy and maintenance costs. The practice of purchasing based on lowest initial costs probably did not make good economic sense prior to 1970, and it certainly does not make good sense now. The wise person will consider all costs and benefits associated with a purchase, both initial and post-purchase, in order to make procurement decisions that are valid for the life of the equipment. This describes a method of financial analysis that considers all pertinent costs: life cycle costing (LCC).

1996-02-01T23:59:59.000Z

100

LIFE Cost of Electricity, Capital and Operating Costs  

Science Conference Proceedings (OSTI)

Successful commercialization of fusion energy requires economic viability as well as technical and scientific feasibility. To assess economic viability, we have conducted a pre-conceptual level evaluation of LIFE economics. Unit costs are estimated from a combination of bottom-up costs estimates, working with representative vendors, and scaled results from previous studies of fission and fusion plants. An integrated process model of a LIFE power plant was developed to integrate and optimize unit costs and calculate top level metrics such as cost of electricity and power plant capital cost. The scope of this activity was the entire power plant site. Separately, a development program to deliver the required specialized equipment has been assembled. Results show that LIFE power plant cost of electricity and plant capital cost compare favorably to estimates for new-build LWR's, coal and gas - particularly if indicative costs of carbon capture and sequestration are accounted for.

Anklam, T

2011-04-14T23:59:59.000Z

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Cost-sensitive classifier evaluation using cost curves  

Science Conference Proceedings (OSTI)

The evaluation of classifier performance in a cost-sensitive setting is straightforward if the operating conditions (misclassification costs and class distributions) are fixed and known. When this is not the case, evaluation requires a method of visualizing ...

Robert C. Holte; Chris Drummond

2008-05-01T23:59:59.000Z

102

Cost Sensitive Conditional Planning  

E-Print Network (OSTI)

While POMDPs provide a general platform for conditional planning under a wide range of quality metrics they have limited scalability. On the other hand, uniform probability conditional planners scale very well, but many lack the ability to optimize plan quality metrics. We present an innovation to planning graph based heuristics that helps uniform probability conditional planners both scale and generate high quality plans when using actions with non uniform costs. We make empirical comparisons with two state of the art planners to show the benefit of our techniques.

Daniel Bryce; Subbarao Kambhampati

2005-01-01T23:59:59.000Z

103

Cost effective multimedia courseware development  

Science Conference Proceedings (OSTI)

Multimedia technology offers considerable potential for education though the costs of production of courseware are prohibitive especially in a rapidly changing discipline such as computer science. This paper proposes a cost-effective technique which ...

C. J. Pilgrim; Y. K. Leung; D. D. Grant

1997-06-01T23:59:59.000Z

104

Overview and Low Cost Processing  

Science Conference Proceedings (OSTI)

Mar 4, 2013 ... The major reason that there is not more widespread use of titanium and its alloys is the high cost. Developments in reducing the cost of titanium...

105

Cost and Impacts of Policies  

NLE Websites -- All DOE Office Websites (Extended Search)

and Policies RESULTS 2010-2025 and long-run impacts 2010-2025 GovernmentIndustry Costs Hydrogen production, infrastructure & cost HyTrans merges the early transition...

106

User cost in oil production  

E-Print Network (OSTI)

The assumption of an initial fixed mineral stock is superfluous and wrong. User cost (resource rent) in mineral production is the present value of expected increases in development cost. It can be measured as the difference ...

Adelman, Morris Albert

1990-01-01T23:59:59.000Z

107

Cost-sensitive classifier evaluation  

Science Conference Proceedings (OSTI)

Evaluating classifier performance in a cost-sensitive setting is straightforward if the operating conditions (misclassification costs and class distributions) are fixed and known. When this is not the case, evaluation requires a method of visualizing ...

Robert C. Holte; Chris Drummond

2005-08-01T23:59:59.000Z

108

Wind Integration Cost and Cost-Causation: Preprint  

DOE Green Energy (OSTI)

The question of wind integration cost has received much attention in the past several years. The methodological challenges to calculating integration costs are discussed in this paper. There are other sources of integration cost unrelated to wind energy. A performance-based approach would be technology neutral, and would provide price signals for all technology types. However, it is difficult to correctly formulate such an approach. Determining what is and is not an integration cost is challenging. Another problem is the allocation of system costs to one source. Because of significant nonlinearities, this can prove to be impossible to determine in an accurate and objective way.

Milligan, M.; Kirby, B.; Holttinen, H.; Kiviluoma, J.; Estanqueiro, A.; Martin-Martinez, S.; Gomez-Lazaro, E.; Peneda, I.; Smith, C.

2013-10-01T23:59:59.000Z

109

3800 Green Series Cost Elements  

Energy.gov (U.S. Department of Energy (DOE))

Stoller - Legacy ManagementSustainable Acquisition (formerly EPP) Program 3800 Series Cost Elements01/30/2012 (Rev. 4)

110

Empirical Methods of Cost Estimation  

Science Conference Proceedings (OSTI)

...D.P. Hoult and C.L. Meador, Manufacturing Cost Estimating, Materials Selection and Design, Vol 20, ASM Handbook,

111

Bifacial Efficiency at Monofacial Cost  

solar cells; photovoltaics; PV; bifacial efficiency; Monofacial Cost, Bifacial Cells; bifacial Modules; industry growth forum; gamma solar Created ...

112

COST SHARING ON SPONSORED PROJECTS  

E-Print Network (OSTI)

COST SHARING ON SPONSORED PROJECTS 1 California Institute of Technology Issuing Authority: Office is that portion of the total cost of an externally funded project that is not funded by the sponsor. Depending as a demonstration of its commitment to the project. When voluntary cost sharing is included in the proposal budget

Tai, Yu-Chong

113

17.2 - Cost Participation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

17.2 (June 2004) 17.2 (June 2004) 1 Cost Participation [Reference: FAR 35.003(b), DEAR 917.70] Overview This section discusses DOE treatment of cost participation by organizations performing research, development, and demonstration projects under DOE prime contracts. This section does not cover efforts and projects performed for DOE by other Federal agencies. Background Cost participation is a generic term denoting any situation where the Government does not fully reimburse the contractor for all allowable costs necessary to accomplish the project or effort under the contract. The term includes, but is not limited to: * Cost Sharing * Cost Matching * Cost Limitation, which may be direct or indirect * Participation in-kind

114

Realistic costs of carbon capture  

Science Conference Proceedings (OSTI)

There is a growing interest in carbon capture and storage (CCS) as a means of reducing carbon dioxide (CO2) emissions. However there are substantial uncertainties about the costs of CCS. Costs for pre-combustion capture with compression (i.e. excluding costs of transport and storage and any revenue from EOR associated with storage) are examined in this discussion paper for First-of-a-Kind (FOAK) plant and for more mature technologies, or Nth-of-a-Kind plant (NOAK). For FOAK plant using solid fuels the levelised cost of electricity on a 2008 basis is approximately 10 cents/kWh higher with capture than for conventional plants (with a range of 8-12 cents/kWh). Costs of abatement are found typically to be approximately US$150/tCO2 avoided (with a range of US$120-180/tCO2 avoided). For NOAK plants the additional cost of electricity with capture is approximately 2-5 cents/kWh, with costs of the range of US$35-70/tCO2 avoided. Costs of abatement with carbon capture for other fuels and technologies are also estimated for NOAK plants. The costs of abatement are calculated with reference to conventional SCPC plant for both emissions and costs of electricity. Estimates for both FOAK and NOAK are mainly based on cost data from 2008, which was at the end of a period of sustained escalation in the costs of power generation plant and other large capital projects. There are now indications of costs falling from these levels. This may reduce the costs of abatement and costs presented here may be 'peak of the market' estimates. If general cost levels return, for example, to those prevailing in 2005 to 2006 (by which time significant cost escalation had already occurred from previous levels), then costs of capture and compression for FOAK plants are expected to be US$110/tCO2 avoided (with a range of US$90-135/tCO2 avoided). For NOAK plants costs are expected to be US$25-50/tCO2. Based on these considerations a likely representative range of costs of abatement from CCS excluding transport and storage costs appears to be US$100-150/tCO2 for first-of-a-kind plants and perhaps US$30-50/tCO2 for nth-of-a-kind plants.The estimates for FOAK and NOAK costs appear to be broadly consistent in the light of estimates of the potential for cost reductions with increased experience. Cost reductions are expected from increasing scale, learning on individual components, and technological innovation including improved plant integration. Innovation and integration can both lower costs and increase net output with a given cost base. These factors are expected to reduce abatement costs by approximately 65% by 2030. The range of estimated costs for NOAK plants is within the range of plausible future carbon prices, implying that mature technology would be competitive with conventional fossil fuel plants at prevailing carbon prices.

Al Juaied, Mohammed (Harvard Univ., Cambridge, MA (US). Belfer Center for Science and International Affiaris); Whitmore, Adam (Hydrogen Energy International Ltd., Weybridge (GB))

2009-07-01T23:59:59.000Z

115

GUIDE TO NUCLEAR POWER COST EVALUATION. VOLUME 4. FUEL CYCLE COSTS  

SciTech Connect

Information on fuel cycle cost is presented. Topics covered include: nuclear fuel, fuel management, fuel cost, fissionable material cost, use charge, conversion and fabrication costs, processing cost, and shipping cost. (M.C.G.)

1962-03-15T23:59:59.000Z

116

Electric Demand Cost Versus Labor Cost: A Case Study  

E-Print Network (OSTI)

Electric Utility companies charge industrial clients for two things: demand and usage. Depending on type of business and hours operation, demand cost could be very high. Most of the operations scheduling in a plant is achieved considering labor cost. For small plants, it is quite possible that a decrease in labor could result in an increase in electric demand and cost or vice versa. In this paper two cases are presented which highlight the dependence of one on other.

Agrawal, S.; Jensen, R.

1998-04-01T23:59:59.000Z

117

Advanced Fuel Cycle Cost Basis  

SciTech Connect

This report, commissioned by the U.S. Department of Energy (DOE), provides a comprehensive set of cost data supporting a cost analysis for the relative economic comparison of options for use in the Advanced Fuel Cycle Initiative (AFCI) Program. The report describes the AFCI cost basis development process, reference information on AFCI cost modules, a procedure for estimating fuel cycle costs, economic evaluation guidelines, and a discussion on the integration of cost data into economic computer models. This report contains reference cost data for 25 cost modules23 fuel cycle cost modules and 2 reactor modules. The cost modules were developed in the areas of natural uranium mining and milling, conversion, enrichment, depleted uranium disposition, fuel fabrication, interim spent fuel storage, reprocessing, waste conditioning, spent nuclear fuel (SNF) packaging, long-term monitored retrievable storage, near surface disposal of low-level waste (LLW), geologic repository and other disposal concepts, and transportation processes for nuclear fuel, LLW, SNF, transuranic, and high-level waste.

D. E. Shropshire; K. A. Williams; W. B. Boore; J. D. Smith; B. W. Dixon; M. Dunzik-Gougar; R. D. Adams; D. Gombert; E. Schneider

2008-03-01T23:59:59.000Z

118

Advanced Fuel Cycle Cost Basis  

SciTech Connect

This report, commissioned by the U.S. Department of Energy (DOE), provides a comprehensive set of cost data supporting a cost analysis for the relative economic comparison of options for use in the Advanced Fuel Cycle Initiative (AFCI) Program. The report describes the AFCI cost basis development process, reference information on AFCI cost modules, a procedure for estimating fuel cycle costs, economic evaluation guidelines, and a discussion on the integration of cost data into economic computer models. This report contains reference cost data for 26 cost modules24 fuel cycle cost modules and 2 reactor modules. The cost modules were developed in the areas of natural uranium mining and milling, conversion, enrichment, depleted uranium disposition, fuel fabrication, interim spent fuel storage, reprocessing, waste conditioning, spent nuclear fuel (SNF) packaging, long-term monitored retrievable storage, near surface disposal of low-level waste (LLW), geologic repository and other disposal concepts, and transportation processes for nuclear fuel, LLW, SNF, and high-level waste.

D. E. Shropshire; K. A. Williams; W. B. Boore; J. D. Smith; B. W. Dixon; M. Dunzik-Gougar; R. D. Adams; D. Gombert

2007-04-01T23:59:59.000Z

119

Advanced Fuel Cycle Cost Basis  

SciTech Connect

This report, commissioned by the U.S. Department of Energy (DOE), provides a comprehensive set of cost data supporting a cost analysis for the relative economic comparison of options for use in the Advanced Fuel Cycle Initiative (AFCI) Program. The report describes the AFCI cost basis development process, reference information on AFCI cost modules, a procedure for estimating fuel cycle costs, economic evaluation guidelines, and a discussion on the integration of cost data into economic computer models. This report contains reference cost data for 25 cost modules23 fuel cycle cost modules and 2 reactor modules. The cost modules were developed in the areas of natural uranium mining and milling, conversion, enrichment, depleted uranium disposition, fuel fabrication, interim spent fuel storage, reprocessing, waste conditioning, spent nuclear fuel (SNF) packaging, long-term monitored retrievable storage, near surface disposal of low-level waste (LLW), geologic repository and other disposal concepts, and transportation processes for nuclear fuel, LLW, SNF, transuranic, and high-level waste.

D. E. Shropshire; K. A. Williams; W. B. Boore; J. D. Smith; B. W. Dixon; M. Dunzik-Gougar; R. D. Adams; D. Gombert; E. Schneider

2009-12-01T23:59:59.000Z

120

Today in Energy - High airline jet fuel costs prompt cost ...  

U.S. Energy Information Administration (EIA)

Energy Information Administration ... and idling time. ... Delta stated that it anticipates cost savings of $300 million per year as a result of this ...

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

A cost analysis model for heavy equipment  

Science Conference Proceedings (OSTI)

Total cost is one of the most important factors for a heavy equipment product purchase decision. However, the different cost views and perspectives of performance expectations between the different involved stakeholders may cause customer relation problems ... Keywords: Cost responsibilities, Operating costs, Ownership costs, Post-Manufacturing Product Cost (PMPC), System life-cycle cost

Shibiao Chen; L. Ken Keys

2009-05-01T23:59:59.000Z

122

An Explanation of F&A Costs What are F&A Costs?  

E-Print Network (OSTI)

An Explanation of F&A Costs What are F&A Costs? Costs involved in conducting sponsored projects costs and F&A costs together are the actual cost of a sponsored project. Direct costs are "those costs, indirect costs cannot be specifically attributed to an individual project. For example, it is difficult

123

Hydrogen refueling station costs in Shanghai  

E-Print Network (OSTI)

tool to compare existing cost estimates from the literature,It compiles and organizes cost estimates obtained from aE. Hydrogen supply: cost estimate for hydrogen pathways

Weinert, Jonathan X.; Shaojun, Liu; Ogden, Joan M; Jianxin, Ma

2007-01-01T23:59:59.000Z

124

Biodiesel Performance, Costs, and Use  

U.S. Energy Information Administration (EIA)

Biodiesel Performance, Costs, and Use. by Anthony Radich. Introduction. The idea of using vegetable oil for fuel has been around as long as the diesel engine.

125

HTGR Cost Model Users' Manual  

Science Conference Proceedings (OSTI)

The High Temperature Gas-Cooler Reactor (HTGR) Cost Model was developed at the Idaho National Laboratory for the Next Generation Nuclear Plant Project. The HTGR Cost Model calculates an estimate of the capital costs, annual operating and maintenance costs, and decommissioning costs for a high-temperature gas-cooled reactor. The user can generate these costs for multiple reactor outlet temperatures; with and without power cycles, including either a Brayton or Rankine cycle; for the demonstration plant, first of a kind, or nth of a kind project phases; for a single or four-pack configuration; and for a reactor size of 350 or 600 MWt. This users manual contains the mathematical models and operating instructions for the HTGR Cost Model. Instructions, screenshots, and examples are provided to guide the user through the HTGR Cost Model. This model was design for users who are familiar with the HTGR design and Excel. Modification of the HTGR Cost Model should only be performed by users familiar with Excel and Visual Basic.

A.M. Gandrik

2012-01-01T23:59:59.000Z

126

Download Data | Transparent Cost Database  

Open Energy Info (EERE)

in the database does not represent approval of the estimates by DOE or NREL. Levelized cost calculations DO NOT represent real world market conditions. The calculation uses a...

127

Preemptive scheduling with position costs  

E-Print Network (OSTI)

horizon is divided into time periods. In these models, the whole production is not processed in a single period, and production and holding costs are introduced...

128

FIRM PRODUCTIVITY AND SUNK COSTS  

E-Print Network (OSTI)

The main objective of this paper is to explore whether or not sunk costs are systematically related to productivity dierences at the rm level, as suggested by models of industry dynamics (Hopenhayn, 1992).The comparisons of productivity distributions for groups of rms with dierent levels of sunk costs are performed by non-parametric procedures and for a large scale rm-level panel data set of Spanish manufacturing rms. We nd that sunk costs are an important source of heterogeneity across rm productivity. The evidence we nd is consistent with models of industry dynamics predicting lower productivity for rms with a higher level of sunk costs.

Jose C. Farias; Sonia Ruano

2004-01-01T23:59:59.000Z

129

WSRC Nuclear Materials Cost Module  

National Nuclear Security Administration (NNSA)

Office (GAO) WSRC NM Cost Module Generates WSRC monthly and fiscal year to date Inventory and Manufacturing Statement for government owned accountable nuclear materials....

130

Low Cost Carbon Fiber Production Carbon Fiber Manufacturing Cost Modeling  

E-Print Network (OSTI)

Low Cost Carbon Fiber Production Carbon Fiber Manufacturing Cost Modeling Oak Ridge National been identified by carbon fiber manufacturers as a market with substantial growth potential. When manufactured with carbon fiber as opposed to traditional materials such as steel, automotive parts are able

131

Salem County, New Jersey: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

7°, -75.3878525° 7°, -75.3878525° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.5848777,"lon":-75.3878525,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

132

Salem County, Virginia: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

0.0423151° 0.0423151° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.2931012,"lon":-80.0423151,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

133

North Salem, New York: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

3348169°, -73.5712374° 3348169°, -73.5712374° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.3348169,"lon":-73.5712374,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

134

Salem, New Hampshire: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

4225°, -71.2008933° 4225°, -71.2008933° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.7884225,"lon":-71.2008933,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

135

Salem, New Mexico: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

707577°, -107.2130762° 707577°, -107.2130762° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":32.707577,"lon":-107.2130762,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

136

References on Mahler's Measure, Lehmer's Problem, and Salem ...  

E-Print Network (OSTI)

Jul 26, 2010 ... A. Dubickas, Mahler measures in a field are dense modulo 1 , Arch. Math. (Basel) ..... D. W. Boyd, On beta expansions for Pisot numbers , Math.

137

Electric power substation capital costs  

SciTech Connect

The displacement or deferral of substation equipment is a key benefit associated with several technologies that are being developed with the support of the US Department of Energy`s Office of Utility Technologies. This could occur, for example, as a result of installing a distributed generating resource within an electricity distribution system. The objective of this study was to develop a model for preparing preliminary estimates of substation capital costs based on rudimentary conceptual design information. The model is intended to be used by energy systems analysts who need ``ballpark`` substation cost estimates to help establish the value of advanced utility technologies that result in the deferral or displacement of substation equipment. This cost-estimating model requires only minimal inputs. More detailed cost-estimating approaches are recommended when more detailed design information is available. The model was developed by collecting and evaluating approximately 20 sets of substation design and cost data from about 10 US sources, including federal power marketing agencies and private and public electric utilities. The model is principally based on data provided by one of these sources. Estimates prepared with the model were compared with estimated and actual costs for the data sets received from the other utilities. In general, good agreement (for conceptual level estimating) was found between estimates prepared with the cost-estimating model and those prepared by the individual utilities. Thus, the model was judged to be adequate for making preliminary estimates of typical substation costs for US utilities.

Dagle, J.E.; Brown, D.R.

1997-12-01T23:59:59.000Z

138

Cost prediction for ray shooting  

Science Conference Proceedings (OSTI)

The ray shooting problem arises in many different contexts. For example, solving it efficiently would remove a bottleneck when images are ray-traced in computer graphics. Unfortunately, theoretical solutions to the problem are not very practical, ... Keywords: average performance, cost model, cost prediction, octree, ray shooting, space decomposition

Boris Aronov; Herv Brnnimann; Allen Y. Chang; Yi-Jen Chiang

2002-06-01T23:59:59.000Z

139

Audit Costs for the 1986 Texas Energy Cost Containment Program  

E-Print Network (OSTI)

Direct program costs for detailed audits of 13.5 million square feet of institutional building space in the 1986 Texas Energy Cost Containment Program were $0.047/SF. The building area was 63 percent simple (offices, schools, and universities) and 37 percent complex (medical buildings and power plants). Allowing for the influence of one large facility which received less-extensive treatment due to previous work, thorough audits were obtained for an average cost of $0.050/SF. Large medical buildings (greater than about 170,000 square feet) were audited for $0.050/SF or less, and program costs for survey audits of 17.2 million square feet were $0.0028/SF. The effect on audit costs of complexity of recommended modifications, amount of savings determined, amount of implementation costs, building size, and building complexity are discussed. Primary effects on audit costs are size and complexity of buildings. Program guidelines limited consideration of projects with greater than a four year payback.

Heffington, W. M.; Lum, S. K.; Bauer, V. A.; Turner, W. D.

1987-01-01T23:59:59.000Z

140

Preemptive scheduling with position costs  

E-Print Network (OSTI)

imization of the sum of the position costs of all the jobs, which will be denoted by. ??fi in the ?-field of the ..... http://www-poleia.lip6.fr/~sourd/project/position. 5...

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Engineering Cost Analysis - Chapter 17  

NLE Websites -- All DOE Office Websites (Extended Search)

of these is that costs over the life of the project must be estimated based on some forecast, and forecasts have proven to be highly variable and frequently inaccurate. The...

142

Cost | OpenEI Community  

Open Energy Info (EERE)

Cost Cost Home Ocop's picture Submitted by Ocop(5) Member 18 April, 2013 - 13:41 MHK LCOE Reporting Guidance Draft Cost Current DOE LCOE numerical modeling Performance Tidal Wave To normalize competing claims of LCOE, DOE has developed-for its own use-a standardized cost and performance data reporting process to facilitate uniform calculation of LCOE from MHK device developers. This standardization framework is only the first version in what is anticipated to be an iterative process that involves industry and the broader DOE stakeholder community. Multiple files are attached here for review and comment.Upload Files: application/vnd.openxmlformats-officedocument.wordprocessingml.document icon device_performance_validation_data_request.docx application/vnd.openxmlformats-officedocument.spreadsheetml.sheet icon

143

Cost Effective Water Heating Solutions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ELECTRIC 0.92 ELECTRIC 0.92 ELECTRIC HPWH(2) HPWH(3) HPWH Standard 0.62 EF WH unless high natural gas costs (>1.50therm), in which case recommendations consistent with new...

144

Production Cost Optimization Project 2010  

Science Conference Proceedings (OSTI)

The EPRI Production Cost Optimization project assists participating members in implementing or enhancing heat rate optimization programs to reduce production costs through sustainable performance improvements. This Technical Update summarizes the status of the project and presents results for five (5) sites that have completed initial and follow-up assessments. A PCO assessment consists of benchmarking plant thermal performance using historical plant data along with an on-site performance appraisal to id...

2010-12-22T23:59:59.000Z

145

NUCLEAR ENERGY SYSTEM COST MODELING  

Science Conference Proceedings (OSTI)

The U.S. Department of Energys Fuel Cycle Technologies (FCT) Program is preparing to perform an evaluation of the full range of possible Nuclear Energy Systems (NES) in 2013. These include all practical combinations of fuels and transmuters (reactors and sub-critical systems) in single and multi-tier combinations of burners and breeders with no, partial, and full recycle. As part of this evaluation, Levelized Cost of Electricity at Equilibrium (LCAE) ranges for each representative system will be calculated. To facilitate the cost analyses, the 2009 Advanced Fuel Cycle Cost Basis Report is being amended to provide up-to-date cost data for each step in the fuel cycle, and a new analysis tool, NE-COST, has been developed. This paper explains the innovative Island approach used by NE-COST to streamline and simplify the economic analysis effort and provides examples of LCAE costs generated. The Island approach treats each transmuter (or target burner) and the associated fuel cycle facilities as a separate analysis module, allowing reuse of modules that appear frequently in the NES options list. For example, a number of options to be screened will include a once-through uranium oxide (UOX) fueled light water reactor (LWR). The UOX LWR may be standalone, or may be the first stage in a multi-stage system. Using the Island approach, the UOX LWR only needs to be modeled once and the module can then be reused on subsequent fuel cycles. NE-COST models the unit operations and life cycle costs associated with each step of the fuel cycle on each island. This includes three front-end options for supplying feedstock to fuel fabrication (mining/enrichment, reprocessing of used fuel from another island, and/or reprocessing of this islands used fuel), along with the transmuter and back-end storage/disposal. Results of each island are combined based on the fractional energy generated by each islands in an equilibrium system. The cost analyses use the probability distributions of key parameters and employs Monte Carlo sampling to arrive at an islands cost probability density function (PDF). When comparing two NES to determine delta cost, strongly correlated parameters can be cancelled out so that only the differences in the systems contribute to the relative cost PDFs. For example, one comparative analysis presented in the paper is a single stage LWR-UOX system versus a two-stage LWR-UOX to LWR-MOX system. In this case, the first stage of both systems is the same (but with different fractional energy generation), while the second stage of the UOX to MOX system uses the same type transmuter but the fuel type and feedstock sources are different. In this case, the cost difference between systems is driven by only the fuel cycle differences of the MOX stage.

Francesco Ganda; Brent Dixon

2012-09-01T23:59:59.000Z

146

Policy 1306 Cost Sharing on Sponsored Projects  

E-Print Network (OSTI)

Policy 1306 Cost Sharing on Sponsored Projects Responsible Office Office of Research Administration committed cost sharing, and in-kind/matching requirements associated with sponsored projects. Definitions Cost Sharing A portion of total sponsored project costs not funded by the sponsor. Mandatory Cost

147

Sponsored Project Account Cost Transfer Explanation  

E-Print Network (OSTI)

Sponsored Project Account Cost Transfer Explanation Check-Off List December 2011 The explanations checked below best describe the reasons for why the cost transfers are being made. Costs as to how to allocate the cost, temporarily assigned the cost to an existing account that acted

He, Chuan

148

FACILITY AND ADMINISTRATIVE (INDIRECT) COSTS September 2007  

E-Print Network (OSTI)

, 2015. Definitions: Direct Costs: Costs that can be specifically identified with a particular project(s) Cost: A broad category of costs that are common to all research projects. "Facilities" is defined one F&A cost rate. If 50% or more of a project is performed off-campus (exclusive of any subcontract

Albertini, David

149

Fuel Cell System Cost for Transporationa--2008 Cost Estimate  

NLE Websites -- All DOE Office Websites (Extended Search)

Fuel Cell System Cost for Fuel Cell System Cost for Transportation-2008 Cost Estimate National Renewable Energy Laboratory 1617 Cole Boulevard * Golden, Colorado 80401-3393 303-275-3000 * www.nrel.gov NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC Contract No. DE-AC36-08-GO28308 Independent Review Published for the U.S. Department of Energy Hydrogen Program NREL/BK-6A1-45457 May 2009 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or

150

Cost objective PLM and CE  

E-Print Network (OSTI)

Concurrent engineering taking into account product life-cycle factors seems to be one of the industrial challenges of the next years. Cost estimation and management are two main strategic tasks that imply the possibility of managing costs at the earliest stages of product development. This is why it is indispensable to let people from economics and from industrial engineering collaborates in order to find the best solution for enterprise progress for economical factors mastering. The objective of this paper is to present who we try to adapt costing methods in a PLM and CE point of view to the new industrial context and configuration in order to give pertinent decision aid for product and process choices. A very important factor is related to cost management problems when developing new products. A case study is introduced that presents how product development actors have referenced elements to product life-cycle costs and impacts, how they have an idea bout economical indicators when taking decisions during the progression of the project of product development.

Nicolas Perry; Alain Bernard

2010-11-26T23:59:59.000Z

151

Costs of electronuclear fuel production  

SciTech Connect

The Los Alamos Scientific Laboratory (LASL) proposes to study the electronuclear fuel producer (EFP) as a means of producing fissile fuel to generate electricity. The main advantage of the EFP is that it may reduce the risks of nuclear proliferation by breeding /sup 233/U from thorium, thereby avoiding plutonium separation. A report on the costs of electronuclear fuel production based upon two designs considered by LASL is presented. The findings indicate that the EFP design variations considered are not likely to result in electricity generation costs as low as the uranium fuel cycle used in the US today. At current estimates of annual fuel output (500 kg /sup 233/U per EFP), the costs of electricity generation using fuel produced by the EFP are more than three times higher than generating costs using the traditional fuel cycle. Sensitivity analysis indicates that electronuclear fuel production would become cost competitive with the traditional uranium fuel cycle when U/sub 3/O/sub 8/ (yellowcake) prices approach $1000 per pound.

Flaim, T.; Loose, V.

1978-07-01T23:59:59.000Z

152

FY 1996 cost savings report  

SciTech Connect

Cost savings are an integral part of Hanford site operations. Congressional actions towards establishing a balanced budget have resulted in reductions to funding for all federal agencies, including the Department of Energy (DOE) Environmental Management (EM) cleanup mission. In September 1994 the DOE Richland Operations Office (RL) approved the FY 1995 multi-year baseline that included a cost estimate of $1.9 billion for FY 1996. However, Congress only appropriated $1.3 billion for that year. The shortfall of $600 million resulted in a significant challenge to accomplish the required workscope. Therefore, RL initiated an aggressive cost savings program to eliminate the shortfall by deleting workscope that was unnecessary and performing the remaining workscope more efficiently. RL initiated baseline planning actions (including deletions, deferrals, transfers, and additions) during the FY 1996 multi-year baseline development process to match workscope and anticipated funding and identified $205 million of workscope deletions. CFR (Contract Finance and Review Division) then reviewed over 200 cost baseline change requests during FY 1996 and documented an additional $95 million of FY 1996 cost savings. This included $73 million of workscope deletions and $22 million of efficiencies. Total savings as a result of FY 1996 initiatives, including baseline planning actions and current year initiatives, were $300 million.

Andrews-Smith, K.L.

1997-08-15T23:59:59.000Z

153

Total Cost of Motor-Vehicle Use  

E-Print Network (OSTI)

Grand total social cost of highway transportation Subtotal:of alternative transportation investments. A social-costtransportation option that has These costs will be inefficiently incurred if people do not fully lower total social costs.

Delucchi, Mark A.

1996-01-01T23:59:59.000Z

154

Maintenance cost studies of present aircraft subsystems  

E-Print Network (OSTI)

This report describes two detailed studies of actual maintenance costs for present transport aircraft. The first part describes maintenance costs for jet transport aircraft broken down into subsystem costs according to an ...

Pearlman, Chaim Herman Shalom

1966-01-01T23:59:59.000Z

155

Total cost model for making sourcing decisions  

E-Print Network (OSTI)

This thesis develops a total cost model based on the work done during a six month internship with ABB. In order to help ABB better focus on low cost country sourcing, a total cost model was developed for sourcing decisions. ...

Morita, Mark, M.B.A. Massachusetts Institute of Technology

2007-01-01T23:59:59.000Z

156

Benefit-cost in a Benevolent Society  

E-Print Network (OSTI)

that there is a well-de?ned cost function C( y) for publicthe private values bene?t-cost test, but is potentiallythe private values bene?t-cost test, Lemma 4 implies y-

Bergstrom, Ted

2005-01-01T23:59:59.000Z

157

USA oilgas production cost : recent changes  

E-Print Network (OSTI)

During 1984-1989, oil development investment cost in the USA fell, but only because of lower activity. The whole cost curve shifted unfavorably (leftward). In contrast, natural gas cost substantially decreased, the curve ...

Adelman, Morris Albert

1991-01-01T23:59:59.000Z

158

NETL: Turbine Projects - Cost Reduction  

NLE Websites -- All DOE Office Websites (Extended Search)

Cost Reduction Cost Reduction Turbine Projects Cost Reduction Single Crystal Turbine Blades Enhancing Gas Turbine Efficiency Data/Fact Sheets Enabling and Information Technologies to Increase RAM of Advanced Powerplants Data/Fact Sheets Development of NDE Technology for Environmental Barrier Coating and Residual Life Estimation Data/Fact Sheets Welding and Weld Repair of Single Crystal Gas Turbine Alloy Data/Fact Sheets Combustion Turbine Hot Section Coating Life Management Data/Fact Sheets On-Line Thermal Barrier Coating Monitor for Real-Time Failure Protection and Life Maximization Data/Fact Sheets On-Line Thermal Barrier Coating [PDF] Advanced Monitoring to Improve Combustion Turbine/Combined Cycle RAM Data/Fact Sheets Advanced Monitoring to Improve Combustion Turbine [PDF]

159

Cost-Causation and Integration Cost Analysis for Variable Generation  

Science Conference Proceedings (OSTI)

This report examines how wind and solar integration studies have evolved, what analysis techniques work, what common mistakes are still made, what improvements are likely to be made in the near future, and why calculating integration costs is such a difficult problem and should be undertaken carefully, if at all.

Milligan, M.; Ela, E.; Hodge, B. M.; Kirby, B.; Lew, D.; Clark, C.; DeCesaro, J.; Lynn, K.

2011-06-01T23:59:59.000Z

160

Costs  

Science Conference Proceedings (OSTI)

Table 9   Pricing of automotive coiled spring steel...3 kg (20 tons) per car ? Total $40.75 (a) 1989 prices...

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Entanglement cost in practical scenarios  

E-Print Network (OSTI)

We quantify the one-shot entanglement cost of an arbitrary bipartite state, that is the minimum number of singlets needed by two distant parties to create a single copy of the state up to a finite accuracy, using local operations and classical communication only. This analysis, in contrast to the traditional one, pertains to scenarios of practical relevance, in which resources are finite and transformations can only be achieved approximately. Moreover, it unveils a fundamental relation between two well-known entanglement measures, namely, the Schmidt number and the entanglement of formation. Using this relation, we are able to recover the usual expression of the entanglement cost as a special case.

Francesco Buscemi; Nilanjana Datta

2009-06-19T23:59:59.000Z

162

OPPORTUNITY COST OF LAND AND URBAN GROWTH.  

E-Print Network (OSTI)

??This study examines the impact of the opportunity cost of urban land on urban growth. Based on prices, costs and productivity data on agricultural commodities (more)

Jiang, Bo

2011-01-01T23:59:59.000Z

163

Malaysian food service organisations and transaction cost.  

E-Print Network (OSTI)

??Portfolio includes: paper 1. Malaysian food service organisations and transaction cost: literature review paper 2. Malaysian food service organisations and transaction cost: comparative analysis (more)

Lok, Stanley Yap Peng.

2007-01-01T23:59:59.000Z

164

Cost-Effectiveness of Two Different Techniques  

Science Conference Proceedings (OSTI)

Embolization of the Internal Iliac Artery: Cost-Effectiveness of Two Different ... cost -effectiveness of coils versus the Amplatzer Vascular. Plug (AVP) for occlusion...

165

WEB RESOURCE: COST Action 531 - TMS  

Science Conference Proceedings (OSTI)

Feb 12, 2007 ... This site offers progress reports, meeting information and other resources produced by the COST Action 531, a special initiative of COST,...

166

Chapter 30 - Cost Accounting Standards Administration | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

30 - Cost Accounting Standards Administration Chapter 30 - Cost Accounting Standards Administration 30.1DOE'sOversightofCertainContractorDefinedPensionPlansandItsEffect...

167

Definition: Reduced Restoration Cost | Open Energy Information  

Open Energy Info (EERE)

Restoration Cost Jump to: navigation, search Dictionary.png Reduced Restoration Cost The functions that provide this benefit lead to fewer outages andor help restore power quicker...

168

Definition: Reduced Electricity Cost | Open Energy Information  

Open Energy Info (EERE)

Cost Jump to: navigation, search Dictionary.png Reduced Electricity Cost Functions that provide this benefit could help alter customer usage patterns (demand response with price...

169

Lot Sizing with Piecewise Concave Production Costs  

E-Print Network (OSTI)

Feb 14, 2013 ... We study the lot-sizing problem with piecewise concave production costs ... is to propose a minimum cost production plan to satisfy the demand...

170

DOE Hydrogen Analysis Repository: Infrastructure Costs Associated...  

NLE Websites -- All DOE Office Websites (Extended Search)

Infrastructure Costs Associated with Central Hydrogen Production from Biomass and Coal Project Summary Full Title: Infrastructure Costs Associated with Central Hydrogen Production...

171

DOE Hydrogen Analysis Repository: Hydrogen Infrastructure Costs  

NLE Websites -- All DOE Office Websites (Extended Search)

Infrastructure Costs Project Summary Full Title: Fuel Choice for Fuel Cell Vehicles: Hydrogen Infrastructure Costs Previous Title(s): Guidance for Transportation Technologies: Fuel...

172

Costs Drop for Photovoltaic Power Systems  

Science Conference Proceedings (OSTI)

Oct 23, 2009 ... The cost reduction over time was largest for smaller PV systems, such as those used to power individual households. Also, installed costs show...

173

Driltac (Drilling Time and Cost Evaluation)  

Science Conference Proceedings (OSTI)

The users manual for the drill tech model for estimating the costs of geothermal wells. The report indicates lots of technical and cost detail. [DJE-2005

None

1986-08-01T23:59:59.000Z

174

Comparing Infrastructure Costs for Hydrogen and Electricity ...  

NLE Websites -- All DOE Office Websites (Extended Search)

infrastructure cost estimates for * hydrogen refueling stations (HRS) and electric vehicle supply equipment (EVSE) Compare retail costs on a common transportation energy *...

175

Energy information systems (EIS): Technology costs, benefit,...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy information systems (EIS): Technology costs, benefit, and best practice uses Title Energy information systems (EIS): Technology costs, benefit, and best practice uses...

176

Low Cost Nanomaterials for PV Devices  

Impact: Low-cost solution for solar energy (Expand to lighting, batteries, etc) Low-cost Nanomaterials for PV Devices . Title: Slide 1 Author: Donna ...

177

Letting The Sun Shine On Solar Costs: An Empirical Investigation Of Photovoltaic Cost Trends In California  

E-Print Network (OSTI)

LETTING THE SUN SHINE ON SOLAR COSTS: AN EMPIRICALLetting the Sun Shine on Solar Costs: An Empirical

Wiser, Ryan; Bolinger, Mark; Cappers, Peter; Margolis, Robert

2006-01-01T23:59:59.000Z

178

Pollution prevention cost savings potential  

SciTech Connect

The waste generated by DOE facilities is a serious problem that significantly impacts current operations, increases future waste management costs, and creates future environmental liabilities. Pollution Prevention (P2) emphasizes source reduction through improved manufacturing and process control technologies. This concept must be incorporated into DOE`s overall operating philosophy and should be an integral part of Total Quality Management (TQM) program. P2 reduces the amount of waste generated, the cost of environmental compliance and future liabilities, waste treatment, and transportation and disposal costs. To be effective, P2 must contribute to the bottom fine in reducing the cost of work performed. P2 activities at LLNL include: researching and developing innovative manufacturing; evaluating new technologies, products, and chemistries; using alternative cleaning and sensor technologies; performing Pollution Prevention Opportunity Assessments (PPOAs); and developing outreach programs with small business. Examples of industrial outreach are: innovative electroplating operations, printed circuit board manufacturing, and painting operations. LLNL can provide the infrastructure and technical expertise to address a wide variety of industrial concerns.

Celeste, J.

1994-12-01T23:59:59.000Z

179

Wind Electrolysis: Hydrogen Cost Optimization  

DOE Green Energy (OSTI)

This report describes a hydrogen production cost analysis of a collection of optimized central wind based water electrolysis production facilities. The basic modeled wind electrolysis facility includes a number of low temperature electrolyzers and a co-located wind farm encompassing a number of 3MW wind turbines that provide electricity for the electrolyzer units.

Saur, G.; Ramsden, T.

2011-05-01T23:59:59.000Z

180

Alternative Fuels Data Center: Vehicle Cost Calculator  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Vehicle Cost Vehicle Cost Calculator to someone by E-mail Share Alternative Fuels Data Center: Vehicle Cost Calculator on Facebook Tweet about Alternative Fuels Data Center: Vehicle Cost Calculator on Twitter Bookmark Alternative Fuels Data Center: Vehicle Cost Calculator on Google Bookmark Alternative Fuels Data Center: Vehicle Cost Calculator on Delicious Rank Alternative Fuels Data Center: Vehicle Cost Calculator on Digg Find More places to share Alternative Fuels Data Center: Vehicle Cost Calculator on AddThis.com... Vehicle Cost Calculator Vehicle Cost Calculator This tool uses basic information about your driving habits to calculate total cost of ownership and emissions for makes and models of most vehicles, including alternative fuel and advanced technology vehicles. Also

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

The Full Cost of Intercity Travel  

E-Print Network (OSTI)

Transportation," National Resources Defense San Francisco, October Emile Quinet, Monograph the Council, "The Social Cost

Levinson, David

1996-01-01T23:59:59.000Z

182

COMPARATIVE COSTS OF CALIFORNIA CENTRAL STATION ELECTRICITY  

E-Print Network (OSTI)

Commission, nor has the California Energy Commission passed upon the accuracy or adequacy of the information and cost sensitivity analysis curves. The Energy Commission also uses the fixed cost data of the Model in conjunction with the variable cost information of a production cost market simulation model to produce

183

2013-2014 Projected Aviation Program Costs  

E-Print Network (OSTI)

06/21/13 2013-2014 Projected Aviation Program Costs UND Aerospace offers two aviation degree the cost of a degree program. BACHELOR of BUSINESS ADMINISTRATION ** Flight Costs Airport Management Survey Certificate $ 11,574 **NOTE: Total flight costs are based on averages and are subject to change. Also, the ATC

Delene, David J.

184

Liquefaction and Pipeline Costs Bruce Kelly  

E-Print Network (OSTI)

1 Liquefaction and Pipeline Costs Bruce Kelly Nexant, Inc. Hydrogen Delivery Analysis Meeting May 8 total installed cost #12;6 Distribution Pipeline Costs Collected historical Oil & Gas Journal data, and surveyed for current urban and downtown data Verified that historical natural gas pipeline cost data

185

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING AND COST DATA FOR MERCURY CONTROL SYSTEMS ON NON-SCRUBBED COAL-FIRED BOILERS  

SciTech Connect

With the nation's coal-burning utilities facing the possibility of tighter controls on mercury pollutants, the U.S. Department of Energy is funding projects that could offer power plant operators better ways to reduce these emissions at much lower costs. Mercury is known to have toxic effects on the nervous systems of humans and wildlife. Although it exists only in trace amounts in coal, mercury is released when coal burns and can accumulate on land and in water. In water, bacteria transform the metal into methylmercury, the most hazardous form of the metal. Methylmercury can collect in fish and marine mammals in concentrations hundreds of thousands times higher than the levels in surrounding waters. One of the goals of DOE is to develop technologies by 2005 that will be capable of cutting mercury emissions 50 to 70 percent at well under one-half of projected DOE/EPA early cost estimates. ADA Environmental Solutions (ADA-ES) is managing a project to test mercury control technologies at full scale at four different power plants from 2000-2003. The ADA-ES project is focused on those power plants that are not equipped with wet flue gas desulfurization systems. ADA-ES has developed a portable system that was tested at four different utility power plants. Each of the plants is equipped with either electrostatic precipitators or fabric filters to remove solid particles from the plant's flue gas. ADA-ES's technology injects a dry sorbent, such as activated carbon, which removes the mercury and makes it more susceptible to capture by the particulate control devices. PG&E National Energy Group provided two test sites that fire bituminous coals and both are equipped with electrostatic precipitators and carbon/ash separation systems. Wisconsin Electric Power Company provided a third test site that burns Powder River Basin (PRB) coal and has an electrostatic precipitator for particulate control. Alabama Power Company hosted a fourth test at its Plant Gaston, which is equipped with a hot-side electrostatic precipitator and a downstream fabric filter. During the fifteenth reporting quarter, progress was made on the project in the following areas: (1) Test Sites--Final Reports for the two remaining plants are being written (Salem Harbor and Brayton Point). (2) Technology Transfer--Technical information about the project was presented to a number of organizations during the quarter including members of congress, coal companies, architect/engineering firms, National Mining Association, the North Carolina Department of Air Quality, the National Coal Council and EPA.

Jean Bustard; Richard Schlager

2004-08-03T23:59:59.000Z

186

Interruption Cost Estimate Calculator | Open Energy Information  

Open Energy Info (EERE)

Interruption Cost Estimate Calculator Interruption Cost Estimate Calculator Jump to: navigation, search Tool Summary Name: Interruption Cost Estimate (ICE) Calculator Agency/Company /Organization: Freeman, Sullivan & Co. Sector: Energy Focus Area: Grid Assessment and Integration, Energy Efficiency Resource Type: Online calculator, Software/modeling tools User Interface: Website Website: icecalculator.com/ Country: United States Cost: Free Northern America References: [1] Logo: Interruption Cost Estimate (ICE) Calculator This calculator is a tool designed for electric reliability planners at utilities, government organizations or other entities that are interested in estimating interruption costs and/or the benefits associated with reliability improvements. About The Interruption Cost Estimate (ICE) Calculator is an electric reliability

187

Transparent Cost Database | Open Energy Information  

Open Energy Info (EERE)

Transparent Cost Database Transparent Cost Database Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Transparent Cost Database Agency/Company /Organization: Department of Energy Partner: National Renewable Energy Laboratory Sector: Energy Focus Area: Renewable Energy, Solar, Transportation Topics: Baseline projection, Low emission development planning, -LEDS, Resource assessment, Technology characterizations Resource Type: Dataset, Lessons learned/best practices, Software/modeling tools User Interface: Website Web Application Link: en.openei.org/apps/TCDB/ Cost: Free OpenEI Keyword(s): Featured Equivalent URI: cleanenergysolutions.org/content/united-states-transparent-cost-databa Language: English The Transparent Cost Database collects program cost and performance

188

External costs of intercity truck freight transportation  

E-Print Network (OSTI)

From a societal perspective, it is desirable for all transportation users to pay their full social (private and external) costs. We estimate four general types of external costs for intercity freight trucking and compare them with the private costs incurred by carriers. Estimated external costs include: accidents (fatalities, injuries, and property damage); emissions (air pollution and greenhouse gases); noise; and unrecovered costs associated with the provision, operation, and maintenance of public facilities. The analysis reveals that external costs are equal to 13.2 % of private costs and user fees would need to be increased about

David J. Forkenbrock

1999-01-01T23:59:59.000Z

189

Costs in the Norwegian Payment System  

E-Print Network (OSTI)

We calculate social and private cost for the use and production of payment services in Norway for 2007. The calculations include banks, merchants and households cost for cash, cards and giro payments. The social cost is calculated to be 0.49 % of GDP, or NOK 11.16 billion. Costs are also calculated on a per-service basis. The results are compared with data from earlier cost surveys by Norges Bank. The unit costs of the most popular services have decreased over the years. Efficiency and productivity of banks payment service operations has improved. We also make comparisons between frameworks, methodologies, and results from cost surveys in five European countries.

Olaf Gresvik; Harald Haare; Norges Bank; Sigbjrn Atle Berg; Gunnvald Grnvik; Asbjrn Enge

2009-01-01T23:59:59.000Z

190

SunShot Initiative: Reducing Photovoltaic Costs  

NLE Websites -- All DOE Office Websites (Extended Search)

Reducing Photovoltaic Costs to Reducing Photovoltaic Costs to someone by E-mail Share SunShot Initiative: Reducing Photovoltaic Costs on Facebook Tweet about SunShot Initiative: Reducing Photovoltaic Costs on Twitter Bookmark SunShot Initiative: Reducing Photovoltaic Costs on Google Bookmark SunShot Initiative: Reducing Photovoltaic Costs on Delicious Rank SunShot Initiative: Reducing Photovoltaic Costs on Digg Find More places to share SunShot Initiative: Reducing Photovoltaic Costs on AddThis.com... Concentrating Solar Power Photovoltaics Research & Development Competitive Awards Systems Integration Balance of Systems Reducing Photovoltaic Costs Photo of gloved hands pouring liquid from a glass bottle to glass beaker. Past Incubator awardee, Innovalight, is creating high-efficiency, low-cost

191

1998 Cost and Quality Annual  

Gasoline and Diesel Fuel Update (EIA)

8) 8) Distribution Category UC-950 Cost and Quality of Fuels for Electric Utility Plants 1998 Tables June 1999 Energy Information Administration Office of Coal, Nuclear, Electric and Alternate Fuels U.S. Department of Energy Washington DC 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the Department of Energy. The information contained herein should not be construed as advocating or reflecting any policy position of the Department of Energy or any other organization. Contacts The annual publication Cost and Quality of Fuels for Electric Utility Plants (C&Q) is no longer published by the EIA. The tables presented in this document are intended to replace that annual publication. Questions regarding the availability of these data should

192

Entanglement Cost of Nonlocal Measurements  

E-Print Network (OSTI)

For certain joint measurements on a pair of spatially separated particles, we ask how much entanglement is needed to carry out the measurement exactly. For a class of orthogonal measurements on two qubits with partially entangled eigenstates, we present upper and lower bounds on the entanglement cost. The upper bound is based on a recent result by D. Berry [Phys. Rev. A 75, 032349 (2007)]. The lower bound, based on the entanglement production capacity of the measurement, implies that for almost all measurements in the class we consider, the entanglement required to perform the measurement is strictly greater than the average entanglement of its eigenstates. On the other hand, we show that for any complete measurement in d x d dimensions that is invariant under all local Pauli operations, the cost of the measurement is exactly equal to the average entanglement of the states associated with the outcomes.

Somshubhro Bandyopadhyay; Gilles Brassard; Shelby Kimmel; William K. Wootters

2008-09-12T23:59:59.000Z

193

Estimated Cost Description Determination Date:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and posted 2/10/2011 and posted 2/10/2011 *Title, Location Estimated Cost Description Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain $50,000 FONSI: uncertain Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain FONSI: uncertain Total Estimated Cost $70,000 Attachment: Memo, Moody to Marcinowski, III, SUBJECT: NEPA 2011 APS for DOE-SRS, Dated: Annual NEPA Planning Summary Environmental Assessments (EAs) Expected to be Initiated in the Next 12 Months Department of Energy (DOE) Savannah River Site (SRS) Jan-11 Estimated Schedule (**NEPA Milestones) South Carolina Department of Health and Environmental Control (SCDHEC) issued a National Pollutant Discharge Elimination System (NPDES) Industrial Stormwater General Permit (IGP) # SCR000000 November 12, with an effective date of January

194

Consumer Winter Heating Oil Costs  

Gasoline and Diesel Fuel Update (EIA)

6 6 Notes: The outlook for heating oil costs this winter, due to high crude oil costs and tight heating oil supplies, breaks down to an expected increase in heating expenditures for a typical oil-heated household of more than $200 this winter, the result of an 18% increase in the average price and an 11% increase in consumption. The consumption increase is due to the colder than normal temperatures experienced so far this winter and our expectations of normal winter weather for the rest of this heating season. Last winter, Northeast heating oil (and diesel fuel) markets experienced an extremely sharp spike in prices when a severe weather situation developed in late January. It is virtually impossible to gauge the probability of a similar (or worse) price shock recurring this winter,

195

Entanglement Cost of Quantum Channels  

E-Print Network (OSTI)

The entanglement cost of a quantum channel is the minimal rate at which entanglement (between sender and receiver) is needed in order to simulate many copies of a quantum channel in the presence of free classical communication. In this paper we show how to express this quantity as a regularized optimization of the entanglement formation over states that can be generated between sender and receiver. Our formula is the channel analog of a well-known formula for the entanglement cost of quantum states in terms of the entanglement of formation; and shares a similar relation to the recently shattered hope for additivity. The entanglement cost of a quantum channel can be seen as the analog of the quantum reverse Shannon theorem in the case where free classical communication is allowed. The techniques used in the proof of our result are then also inspired by a recent proof of the quantum reverse Shannon theorem and feature the one-shot formalism for quantum information theory, the post-selection technique for quantum channels as well as von Neumann's minimax theorem. We discuss two applications of our result. First, we are able to link the security in the noisy-storage model to a problem of sending quantum rather than classical information through the adversary's storage device. This not only improves the range of parameters where security can be shown, but also allows us to prove security for storage devices for which no results were known before. Second, our result has consequences for the study of the strong converse quantum capacity. Here, we show that any coding scheme that sends quantum information through a quantum channel at a rate larger than the entanglement cost of the channel has an exponentially small fidelity.

Mario Berta; Fernando Brandao; Matthias Christandl; Stephanie Wehner

2011-08-26T23:59:59.000Z

196

Low Cost Emergency VAR Compensator  

Science Conference Proceedings (OSTI)

The barriers to commercialization of the Capacitor Bank Group Shorting (CAPS) concept were investigated in this study. Also, the application of mechanically switched CAPS systems was examined from the technical and cost points of view. In addition, a semiconductor (thyristor) switched or controlled CAPS arrangement was studied. Although only three utilities were surveyed in the market assessment part of the study, it was concluded that if there is a need for additional shunt compensation systems or a nee...

2000-11-08T23:59:59.000Z

197

Transmission Valuation and Cost Recovery  

Science Conference Proceedings (OSTI)

This technical update provides information on the status of the electric power industry regarding the economic valuation of transmission projects. Such valuations became critical with the introduction of economic transmission projects in the context of competitive electricity markets. Economic valuation is also becoming increasingly important for traditional reliability upgrades, because of the need for consistency in cost allocations between the two types of upgrades. The year 2005 has brought significa...

2005-12-22T23:59:59.000Z

198

Prime movers reduce energy costs  

SciTech Connect

Many industrial plants have found that reciprocating engines used to power generator sets and chiller systems are effective in reducing energy costs as part of a load management strategy, while meeting other plant energy needs. As the trend towards high electric utility costs continues, familiarity with basic analyses used to determine the economic viability of engine-driven systems is essential. A basic method to determine the economic viability of genset or chiller systems is to review the supplying utility`s rate structure, determine approximate costs to install and operate an engine-driven system, and calculate a simple equipment payback period. If the initial analysis shows that significant savings are possible and a quick payback is likely, a thorough analysis should be conducted to analyze a plant`s actual electric load profile. A load profile analysis takes into consideration average loads, peak loads, and peak duration. A detailed study should cover myriad considerations, including local air quality regulations and permitting, space availability, auxiliary system components, and financing options. A basic analysis takes relatively little time and can rule out the need for a detailed study.

Swanson, J.E. [Caterpillar, Inc., Mossville, IL (United States)

1996-01-01T23:59:59.000Z

199

Low Cost Hydrogen Production Platform  

DOE Green Energy (OSTI)

A technology and design evaluation was carried out for the development of a turnkey hydrogen production system in the range of 2.4 - 12 kg/h of hydrogen. The design is based on existing SMR technology and existing chemical processes and technologies to meet the design objectives. Consequently, the system design consists of a steam methane reformer, PSA system for hydrogen purification, natural gas compression, steam generation and all components and heat exchangers required for the production of hydrogen. The focus of the program is on packaging, system integration and an overall step change in the cost of capital required for the production of hydrogen at small scale. To assist in this effort, subcontractors were brought in to evaluate the design concepts and to assist in meeting the overall goals of the program. Praxair supplied the overall system and process design and the subcontractors were used to evaluate the components and system from a manufacturing and overall design optimization viewpoint. Design for manufacturing and assembly (DFMA) techniques, computer models and laboratory/full-scale testing of components were utilized to optimize the design during all phases of the design development. Early in the program evaluation, a review of existing Praxair hydrogen facilities showed that over 50% of the installed cost of a SMR based hydrogen plant is associated with the high temperature components (reformer, shift, steam generation, and various high temperature heat exchange). The main effort of the initial phase of the program was to develop an integrated high temperature component for these related functions. Initially, six independent concepts were developed and the processes were modeled to determine overall feasibility. The six concepts were eventually narrowed down to the highest potential concept. A US patent was awarded in February 2009 for the Praxair integrated high temperature component design. A risk analysis of the high temperature component was conducted to identify any potential design deficiency related to the concept. The analysis showed that no fundamental design flaw existed with the concept, but additional simulations and prototypes would be required to verify the design prior to fabricating a production unit. These identified risks were addressed in detail during Phase II of the development program. Along with the models of the high temperature components, a detailed process and 3D design model of the remainder of system, including PSA, compression, controls, water treatment and instrumentation was developed and evaluated. Also, in Phase II of the program, laboratory/fullscale testing of the high temperature components was completed and stable operation/control of the system was verified. The overall design specifications and test results were then used to develop accurate hydrogen costs for the optimized system. Praxair continued development and testing of the system beyond the Phase II funding provided by the DOE through the end of 2008. This additional testing is not documented in this report, but did provide significant additional data for development of a prototype system as detailed in the Phase III proposal. The estimated hydrogen product costs were developed (2007 basis) for the 4.8 kg/h system at production rates of 1, 5, 10, 100 and 1,000 units built per year. With the low cost SMR approach, the product hydrogen costs for the 4.8 kg/h units at 50 units produced per year were approximately $3.02 per kg. With increasing the volume production to 1,000 units per year, the hydrogen costs are reduced by about 12% to $2.67 per kg. The cost reduction of only 12% is a result of significant design and fabrication efficiencies being realized in all levels of production runs through utilizing the DFMA principles. A simplified and easily manufactured design does not require large production volumes to show significant cost benefits. These costs represent a significant improvement and a new benchmark in the cost to produce small volume on-site hydrogen using existing process technologies. The cost mo

Timothy M. Aaron, Jerome T. Jankowiak

2009-10-16T23:59:59.000Z

200

Subject: Cost and Price Analysis | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Subject: Cost and Price Analysis Subject: Cost and Price Analysis Subject: Cost and Price Analysis More Documents & Publications Subject: Cost and Price Analysis Policy Flash...

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Cost of Fuel to General Electricity  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of Fuel to Generate Electricity of Fuel to Generate Electricity Cost of Fuel to Generate Electricity Herb Emmrich Gas Demand Forecast, Economic Analysis & Tariffs Manager SCG/SDG&E SCG/SDG&E Federal Utility Partnership Working Group (FUPWG) 2009 Fall Meeting November 18, 2009 Ontario, California The Six Main Costs to Price Electricity are:  Capital costs - the cost of capital investment (debt & equity), depreciation, Federal & State income taxes and property taxes and property taxes  Fuel costs based on fuel used to generate electricity - hydro, natural gas, coal, fuel oil, wind, solar, photovoltaic geothermal biogas photovoltaic, geothermal, biogas  Operating and maintenance costs  Transmission costs  Distribution costs  Social adder costs - GHG adder, low income adder,

202

Breaking the Fuel Cell Cost Barrier  

NLE Websites -- All DOE Office Websites (Extended Search)

Breaking the Fuel Cell Cost Barrier Breaking the Fuel Cell Cost Barrier AMFC Workshop May 8 th , 2011, Arlington, VA Shimshon Gottesfeld, CTO The Fuel Cell Cost Challenge 2 CellEra's goal - achieve price parity with incumbents earlier on in market entry process ! Mainstream Polymer Electrolyte Fuel Cell ( PEM) Cost Barriers 3 Graphite / stainless steel hardware Acidic membrane Platinum based electrodes Cost barriers deeply embedded in core tech materials BOM-based cost barriers - 90% of stack cost Cost volatility - Platinum $500/Oz - $2,500/Oz The possibility of an OH - ion conducting membrane 4 Non-acidic membrane CellEra Took Advantage of this Opportunity A new type of membrane component with potential for strong fuel cell cost cuts was revealed in 2006, but was accompanied by general industry skepticism

203

Project Scoping and CostProject Scoping and Cost Management:Management  

E-Print Network (OSTI)

Project Scoping and CostProject Scoping and Cost Management:Management: Office Overview Scoping and NEPA/MEPAScoping and NEPA/MEPA Scoping and Cost EstimatesScoping and Cost Estimates Project Define a Project so we canOffice Focus: Better Define a Project so we can have a more accurate cost

Minnesota, University of

204

Cost estimating method of industrial product implemented in WinCOST software system  

Science Conference Proceedings (OSTI)

The paper presents a method for estimating the cost of industrial products and its implementation into a software system named WinCOST. The software is used for calculating the manufacturing time and cost evaluation of industrial products with high level ... Keywords: chip removing process, cold forming processes, cost estimation, cost per hour, software system

Gheorghe Oancea; Lucia Antoneta Chicos; Camil Lancea

2010-07-01T23:59:59.000Z

205

Capital cost models for geothermal power plants  

SciTech Connect

A computer code, titled GEOCOST, has been developed at Battelle, Pacific Northwest Laboratories, to rapidly and systematically calculate the potential costs of geothermal power. A description of the cost models in GEOCOST for the geothermal power plants is given here. Plant cost models include the flashed steam and binary systems. The data sources are described, along with the cost data correlations, resulting equations, and uncertainties. Comparison among GEOCOST plant cost estimates and recent A-E estimates are presented. The models are intended to predict plant costs for second and third generation units, rather than the more expensive first-of-a-kind units.

Cohn, P.D.; Bloomster, C.H.

1976-07-01T23:59:59.000Z

206

DOE Hydrogen Analysis Repository: PEMFC Manufacturing Cost  

NLE Websites -- All DOE Office Websites (Extended Search)

PEMFC Manufacturing Cost PEMFC Manufacturing Cost Project Summary Full Title: Manufacturing Cost of Stationary Polymer Electrolyte Membrane (PEM) Fuel Cell Systems Project ID: 85 Principal Investigator: Brian James Keywords: Costs; fuel cells; stationary Performer Principal Investigator: Brian James Organization: Directed Technologies, Inc. (DTI) Address: 3601 Wilson Blvd., Suite 650 Arlington, VA 22201 Telephone: 703-243-3383 Email: brian_james@directedtechnologies.com Period of Performance End: November 1999 Project Description Type of Project: Analysis Category: Cross-Cutting Objectives: Estimate the cost of the fuel cell system using the Directed Technologies, Inc. cost database built up over the several years under U.S. Department of Energy and Ford Motor Company contracts.

207

Seize Opportunities to Reduce Cost  

NLE Websites -- All DOE Office Websites (Extended Search)

Specify for maximum energy savings Specify for maximum energy savings Windows must meet local energy code requirements. For even higher energy performance, consider ENERGY STAR windows, which are recommended for low-rise dwellings and are often suitable for mid-rise dwellings as well. For window and storm window options with superior performance in cold climates, check out the U.S. Department of Energy's highly insulating windows purchasing program (see next page). Seize Opportunities to Reduce Cost Government or utility incentives and financing may be available for energy efficiency in low-income housing. Check www.dsireusa.org for up-to-date information on incentive

208

Global Direct Cost of Corrosion  

Science Conference Proceedings (OSTI)

Table 8   Country-specific direct cost of corrosion for the year 2004...Basque region 1988 Pesetas, 75 100.00 0.75 1.9977 1.5 Czechoslovakia 1998 Koruna, 31.816 (f) 29.8600 1.0655 1.1006 1.17 Netherlands 1969 Guilders, 0.51441 3.6340 0.1416 8.2103 1.16 Sweden 1967 Kroner, 1 5.0000 0.2000 3.0284 0.61 Finland 1965 Markka, 0.175 (g) 3.2110 0.0545 2.0995 0.11 Global...

209

Cost effectiveness of sonic drilling  

SciTech Connect

Sonic drilling (combination of mechanical vibrations and rotary power) is an innovative environmental technology being developed in cooperation with DOE`s Arid-Site Volatile Organic Compounds Integrated Demonstration at Hanford and the Mixed Waste Landfill Integrated Demonstration at Sandia. This report studies the cost effectiveness of sonic drilling compared with cable-tool and mud rotary drilling. Benefit of sonic drilling is its ability to drill in all types of formations without introducing a circulating medium, thus producing little secondary waste at hazardous sites. Progress has been made in addressing the early problems of failures and downtime.

Masten, D.; Booth, S.R.

1996-03-01T23:59:59.000Z

210

FY 1995 cost savings report  

SciTech Connect

Fiscal Year (FY) 1995 challenged us to dramatically reduce costs at Hanford. We began the year with an 8 percent reduction in our Environmental Management budget but at the same time were tasked with accomplishing additional workscope. This resulted in a Productivity Challenge whereby we took on more work at the beginning of the year than we had funding to complete. During the year, the Productivity Challenge actually grew to 23 percent because of recissions, Congressional budget reductions, and DOE Headquarters actions. We successfully met our FY 1995 Productivity Challenge through an aggressive cost reduction program that identified and eliminated unnecessary workscope and found ways to be more efficient. We reduced the size of the workforce, cut overhead expenses, eliminated paperwork, cancelled construction of new facilities, and reengineered our processes. We are proving we can get the job done better and for less money at Hanford. DOE`s drive to do it ``better, faster, cheaper`` has led us to look for more and larger partnerships with the private sector. The biggest will be privatization of Hanford`s Tank Waste Remediation System, which will turn liquid tank waste into glass logs for eventual disposal. We will also save millions of dollars and avoid the cost of replacing aging steam plants by contracting Hanford`s energy needs to a private company. Other privatization successes include the Hanford Mail Service, a spinoff of advanced technical training, low level mixed waste thermal treatment, and transfer of the Hanford Museums of Science and history to a private non-profit organization. Despite the rough roads and uncertainty we faced in FY 1995, less than 3 percent of our work fell behind schedule, while the work that was performed was completed with an 8.6 percent cost under-run. We not only met the FY 1995 productivity challenge, we also met our FY 1995-1998 savings commitments and accelerated some critical cleanup milestones. The challenges continue. Budgets remain on the decline, even while the expectations increase. Yet we are confident in our ability to keep our commitments and goals by identifying new efficiencies in the Hanford cleanup program. We will also pursue new contracting arrangements that will allow us to foster greater competition and use more commercial practices while maintaining our commitment to the safety and health of the public, our workers, and the environment.

Andrews-Smith, K.L., Westinghouse Hanford

1996-06-21T23:59:59.000Z

211

Global Indirect Cost of Corrosion  

Science Conference Proceedings (OSTI)

Table 9   Indirect cost of corrosion for the USA (1998 basis)...76.64 ? ? ? Mining 27.86 ? ? ? Petroleum refining 32.22 ? ? ? Chemical, petrochemical, and pharmaceutical 111.04 ? ? ? Pulp and paper 148.05 ? ? ? Agricultural 126.28 ? ? ? Food processing 123.66 ? ? ? Electronics ? ? ? ? Home appliances 25.25 ? ? ? Subtotal 671.00 Production loss 2.5??5.5 26.84...

212

Drilling costs drop 7% in 1985  

SciTech Connect

Drilling costs dropped about 7% last year. This decline cancels a slight increase in 1984. Total costs to drill now run about 59% of the 1981 highs. Comparable figures for the previous 2 years are 63 and 61%. Deeper wells showed the biggest drops. Shallow well costs fell about 6%. Energy Information Administration (EIA) indexes drilling costs on a 1976 base year. Costs for shallow wells (5,000 ft or less) show an index about 138. Deeper wells have an index around 149. Cost declines were the greatest in West and North Texas and the Rockies, of 11%. The Northeast and Western areas showed greater than average declines, 9% or so. The High Plains, New Mexico, and Midcontinent areas recorded near the average 7% decline. Costs in South Louisiana, the Southeast, and Ark-La-Tex 2%. West Central Texas costs were off only 1%. The Southeast was essentially unchanged. Indexes by area show generally that drilling costs have declined since 1983. The summary here comes from EIA's ''Indexes and Estimates of Domestic Well Drilling Costs 1984 and 1985''. That report covers oil, gas, and dry hole costs, cost components, and overall costs.

Anderson, T.; Funk, V.

1986-03-24T23:59:59.000Z

213

Using Natural Gas Transmission Pipeline Costs to Estimate Hydrogen Pipeline Costs  

E-Print Network (OSTI)

the construction costs of natural gas, oil, and petroleumR. Current pipeline costs. Oil & Gas Journal; Nov 21,cost projections for over 20,000 miles of natural gas, oil, and

Parker, Nathan

2004-01-01T23:59:59.000Z

214

Application of activity-based costing in a manufacturing company: a comparison with traditional costing  

Science Conference Proceedings (OSTI)

Activity-Based Costing (ABC) represents an alternative paradigm to traditional cost accounting system and has received extensive attention during the past decade. Rather than distorting the cost information by using traditional overhead allocation methods, ...

Gonca Tuncel; Derya Eren Akyol; Gunhan Mirac Bayhan; Utku Koker

2005-05-01T23:59:59.000Z

215

Hydrogen production costs -- A survey  

SciTech Connect

Hydrogen, produced using renewable resources, is an environmentally benign energy carrier that will play a vital role in sustainable energy systems. The US Department of Energy (DOE) supports the development of cost-effective technologies for hydrogen production, storage, and utilization to facilitate the introduction of hydrogen in the energy infrastructure. International interest in hydrogen as an energy carrier is high. Research, development, and demonstration (RD and D) of hydrogen energy systems are in progress in many countries. Annex 11 of the International Energy Agency (IEA) facilitates member countries to collaborate on hydrogen RD and D projects. The United States is a member of Annex 11, and the US representative is the Program Manager of the DOE Hydrogen R and D Program. The Executive Committee of the Hydrogen Implementing Agreement in its June 1997 meeting decided to review the production costs of hydrogen via the currently commercially available processes. This report compiles that data. The methods of production are steam reforming, partial oxidation, gasification, pyrolysis, electrolysis, photochemical, photobiological, and photoelectrochemical reactions.

Basye, L.; Swaminathan, S.

1997-12-04T23:59:59.000Z

216

Environmental protection using social costing  

Science Conference Proceedings (OSTI)

Emissions and other residual wastes come from industrial production, commercial and household activities, and transportation. These wastes damage the environment, including human health. As economies grow, so does concern about balancing that growth with the desire for environmental protection. At issue is how much environmental protection we should have. We address this issue using the concept of social costing. The issue is discussed in the context of electric power generation. There is particular concern about the use of fossil fuels such as petroleum, the major fuel used in the Republic of China, and coal which is the most common fuel used in the U. S. Electric power generation is a major source of airborne pollutants such as SO{sub 2}, NO{sub x} particulate matter, volatile organic compounds, CO, and CO{sub 2}. It also results in liquid and solid wastes, and other effects such as changes in land use. To generate electric power, fuel (such as petroleum, coal or enriched uranium) or some other resource (e.g., wind or geothermal) is needed. A fuel cycle consists of a sequence of activities and processes involved in generating electric power. These activities include fuel extraction, treatment and processing; fuel conversion into electricity; transmission; waste disposal; and transportation of fuel and wastes between the different stages of the fuel cycle. Each stage results in emissions or other residuals. Several recent-studies have been about the environmental costs of electricity.

Lee, R.

1993-10-01T23:59:59.000Z

217

Benchmark the Fuel Cost of Steam Generation  

SciTech Connect

This revised ITP tip sheet on benchmarking the fuel cost of steam provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

2006-01-01T23:59:59.000Z

218

Updating MIT's cost estimation model for shipbuilding  

E-Print Network (OSTI)

This thesis project will update the MIT ship cost estimation model by combining the two existing models (the Basic Military Training School (BMTS) Cost Model and the MIT Math Model) in order to develop a program that can ...

Smith, Matthew B., Lieutenant, junior grade

2008-01-01T23:59:59.000Z

219

A. Appendix: Cost Estimate for the Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

Appendix: Cost Estimate for the Facility Determining the cost of a facility as complex as the neutrino source presented here is a very difficult task within the short time period...

220

Reducing Home Heating and Cooling Costs  

U.S. Energy Information Administration (EIA) Indexed Site

. . . . . . . . . . . . 19 B1. Annual Cost of Oil Heat in Various Climates for a Range of Heating Oil Prices and System Efficiencies . . . . . 21 B2. Annual Cost of Gas Heat in...

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

2010 Cost of Wind Energy Review  

DOE Green Energy (OSTI)

This document provides a detailed description of NREL's levelized cost of wind energy equation, assumptions and results in 2010, including historical cost trends and future projections for land-based and offshore utility-scale wind.

Tegen, S.; Hand, M.; Maples, B.; Lantz, E.; Schwabe, P.; Smith, A.

2012-04-01T23:59:59.000Z

222

Average-case active learning with costs  

Science Conference Proceedings (OSTI)

We analyze the expected cost of a greedy active learning algorithm. Our analysis extends previous work to a more general setting in which different queries have different costs. Moreover, queries may have more than two possible responses and the distribution ...

Andrew Guillory; Jeff Bilmes

2009-10-01T23:59:59.000Z

223

College of Engineering Request for Institutional Waiver of Indirect Cost  

E-Print Network (OSTI)

Investigator Sponsor Project Title Total Direct Costs Total Modified Direct Costs Full Indirect Costs Rate Full Indirect Costs Amount Total Project Costs (with Full IDC) Requested Indirect Costs Rate Requested Indirect Costs Amount Total Project Costs (with req'd IDC) Principal Investigator's Justification for Indirect

Eustice, Ryan

224

DOE G 430.1-1 Chp 8, Startup Costs  

Directives, Delegations, and Requirements

This chapter discusses startup costs for construction and environmental projects, and estimating guidance for startup costs.

1997-03-28T23:59:59.000Z

225

Letting The Sun Shine On Solar Costs: An Empirical Investigation Of Photovoltaic Cost Trends In California  

E-Print Network (OSTI)

PHOTOVOLTAIC COST TRENDS IN CALIFORNIA Ryan Wiser Lawrencein the United States: California. We find that: (1) solarof PV system costs in California. Through mid-November 2005,

Wiser, Ryan; Bolinger, Mark; Cappers, Peter; Margolis, Robert

2006-01-01T23:59:59.000Z

226

An algorithm for minimization of quantum cost  

E-Print Network (OSTI)

A new algorithm for minimization of quantum cost of quantum circuits has been designed. The quantum cost of different quantum circuits of particular interest (eg. circuits for EPR, quantum teleportation, shor code and different quantum arithmetic operations) are computed by using the proposed algorithm. The quantum costs obtained using the proposed algorithm is compared with the existing results and it is found that the algorithm has produced minimum quantum cost in all cases.

Anindita Banerjee; Anirban Pathak

2009-10-12T23:59:59.000Z

227

Reduce Pumping Costs through Optimum Pipe Sizing  

SciTech Connect

BestPractices Program tip sheet discussing pumping system efficiency by reducing pumping costs through optimum pipe sizing.

2005-10-01T23:59:59.000Z

228

TIBER-II cost models and estimates  

SciTech Connect

This report consists of a series of viewgraphs dealing with cost associated with construction of a thermonuclear power plant. (JDH)

Thomson, S.L.

1987-04-06T23:59:59.000Z

229

Foodborne Illness Cost Calculator | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Foodborne Illness Cost Calculator Foodborne Illness Cost Calculator Agriculture Community Menu DATA APPS EVENTS DEVELOPER STATISTICS COLLABORATE ABOUT Agriculture You are here Data.gov » Communities » Agriculture » Data Foodborne Illness Cost Calculator Dataset Summary Description The calculator provides information on the assumptions behind foodborne illness cost estimates and gives you a chance to make your own assumptions and calculate your own cost estimates. This interactive web-based tool allows users to estimate the cost of illness due to specific foodborne pathogens. The updated ERS cost estimate for Shiga-toxin producing E. coli O157 (STEC O157) was added to the Calculator in spring, 2008. Calculator users can now review and change the assumptions behind the ERS cost estimates for either STEC O157 or Salmonella. The assumptions that can be modified include the annual number of cases, the distribution of cases by severity, the use or costs of medical care, the amount or value of time lost from work, the costs of premature death, and the disutility costs for nonfatal cases. Users can also update the cost estimate for inflation for any year from 1997 to 2007.

230

How Much Does That Incinerator Cost?  

E-Print Network (OSTI)

Biosecurity on poultry farms includes proper disposal of dead carcasses. In many cases, that means using an incinerator. Calculating the cost of an incinerator means considering long and short-term expenses and the cost of fuel. This publication explains how to select the right size incinerator and calculate all associated costs.

Mukhtar, Saqib; Nash, Catherine; Harman, Wyatte; Padia, Reema

2008-07-25T23:59:59.000Z

231

Activity-Based Costing for Electric Utilities  

Science Conference Proceedings (OSTI)

Activity-Based costing (ABC) is a cost-management approach that can help utility managers make better decisions through more-accurate process and product cost information and a better understanding of activities that either do or do not add value. This report is a primer on ABC.

1992-09-01T23:59:59.000Z

232

Policy 1305 Cost Transfers Involving Sponsored Projects  

E-Print Network (OSTI)

Policy 1305 Cost Transfers Involving Sponsored Projects Responsible Office Office of Grant transfer of payroll and other direct costs associated with sponsored projects. Purpose of the Policy are responsible for ensuring that transfers of costs to sponsored projects which represent corrections of errors

233

2012 2013 Projected Aviation Program Costs  

E-Print Network (OSTI)

2012 ­ 2013 Projected Aviation Program Costs UND Aerospace offers two aviation degree programs with a total of seven academic majors. Each has its own flight course requirements, which affect the cost of a degree program. BACHELOR of BUSINESS ADMINISTRATION ** Flight Costs Airport Management Survey of Flight

Delene, David J.

234

Costing the Target May 17, 2011  

E-Print Network (OSTI)

to provide it with the right information! ­ Broken down into 3 project phases with associated costs and man-power. · Costing workshop on 25th May at CERN ­ Plan is to discuss Project Breakdown Structures (PBSs, to document how costs are derived. · Project has 3 phases · Industrialisation · Procurement · Reception (i

McDonald, Kirk

235

Unit costs of waste management operations  

SciTech Connect

This report provides estimates of generic costs for the management, disposal, and surveillance of various waste types, from the time they are generated to the end of their institutional control. Costs include monitoring and surveillance costs required after waste disposal. Available data on costs for the treatment, storage, disposal, and transportation of spent nuclear fuel and high-level radioactive, low-level radioactive, transuranic radioactive, hazardous, mixed (low-level radioactive plus hazardous), and sanitary wastes are presented. The costs cover all major elements that contribute to the total system life-cycle (i.e., ``cradle to grave``) cost for each waste type. This total cost is the sum of fixed and variable cost components. Variable costs are affected by operating rates and throughput capacities and vary in direct proportion to changes in the level of activity. Fixed costs remain constant regardless of changes in the amount of waste, operating rates, or throughput capacities. Key factors that influence cost, such as the size and throughput capacity of facilities, are identified. In many cases, ranges of values for the key variables are presented. For some waste types, the planned or estimated costs for storage and disposal, projected to the year 2000, are presented as graphics.

Kisieleski, W.E.; Folga, S.M.; Gillette, J.L.; Buehring, W.A.

1994-04-01T23:59:59.000Z

236

External Costs of Energy Technologies Position Statement  

E-Print Network (OSTI)

The American Nuclear Society believes that decisions concerning national energy policy should appropriately take external costs into account. In some energy options, external costs are not included in the cost of the energy produced; instead, they are borne by parties not involved in the original transaction, generally without consent or due compensation. External costs 1 may be related to many factors, including impacts on public health, environmental impacts, degradation of quality of life, degradation of agricultural land, depletion of natural resources, and reduction in security. These costs are incurred at various stages of the life cycle of an energy technology. While some energy technologies may appear to have smaller environmental impacts than others, their external costs may be significant when the complete life cycle costs are taken into account. Particularly, an energy source that is inherently intermittent will require, for applications demanding reliable performance, either a backup energy supply or an energy storage facility, whose external costs are not negligible. On the other hand, practically all the costs to make nuclear power technology safe and secure, including the costs of waste management and disposal, are already incorporated into the cost of electricity generation. 2 Appropriately accounting for external costs should be an essential element in energy policy since in doing so, the final product is compared based on a consistent set of parameters for all technologies, and the resulting mix of energy sources will more appropriately balance the competing economic, environmental, and social needs from energy production and consumption.

unknown authors

2010-01-01T23:59:59.000Z

237

Update on the Cost of Nuclear Power  

E-Print Network (OSTI)

We update the cost of nuclear power as calculated in the MIT (2003) Future of Nuclear Power study. Our main focus is on the changing cost of construction of new plants. The MIT (2003) study provided useful data on the cost ...

Parsons, John E.

2009-01-01T23:59:59.000Z

238

Updated Costs for Decommissioning Nuclear Power Facilities  

Science Conference Proceedings (OSTI)

This update of 1978 NRC cost estimates--in 1984 dollars--also estimates the costs of several special manpower and licensing options for decommissioning nuclear power facilities. The fully developed methodology offers utilities a sound basis on which to estimate the costs of decommissioning specific plants.

1985-05-13T23:59:59.000Z

239

PROJECT COST $53,108,617  

E-Print Network (OSTI)

PROJECT COST $53,108,617 CONSTRUCTION COST $42,730,152 FURNISHING & EQUIPMENT $1,671.580 TOTAL SPRING 2001 Review of Documents and Cost Estimate Reconciliation APRIL 20, 2001 Formal Ground Breaking of the Campus Intramural and Recreation Advisory Committee SPRING/SUMMER1998 Campus Needs Assessment Process

Bittner, Eric R.

240

Heat exchanger Exergoeconomic lifecycle cost optimization  

Science Conference Proceedings (OSTI)

Considering lifecycle cost analysis during the design phase of thermal systems gives the design effort more worth. Furthermore thermodynamic exergetic optimization is proven to be useful method for determining the most lifecycle cost optimal design of ... Keywords: entropy generation, exergy destruction, heat exchanger, operating cost, optimization, thermodynamics

Liaquat Ali Khan; Ali El-Ghalban

2008-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

What does a negawatt really cost?  

E-Print Network (OSTI)

We use data from ten utility conservation programs to calculate the cost per kWh of electricity saved -- the cost of a "negawatthour" -- resulting from these programs. We first compute the life-cycle cost per kWh saved ...

Joskow, Paul L.

1991-01-01T23:59:59.000Z

242

The Integration of Process and Cost Modeling  

Science Conference Proceedings (OSTI)

For information on the symposium, refer to the November Meetings Calendar, beginning ... The managers of materials enterprises are market and cost driven. ... The fact that matter and thermal energy must be conserved (i.e., they cannot be .... sheet to a cost analysis and obtain information on the projected production costs.

243

Defense waste transportation: cost and logistics studies  

SciTech Connect

Transportation of nuclear wastes from defense programs is expected to significantly increase in the 1980s and 1990s as permanent waste disposal facilities come into operation. This report uses models of the defense waste transportation system to quantify potential transportation requirements for treated and untreated contact-handled transuranic (CH-TRU) wastes and high-level defense wastes (HLDW). Alternative waste management strategies in repository siting, waste retrieval and treatment, treatment facility siting, waste packaging and transportation system configurations were examined to determine their effect on transportation cost and hardware requirements. All cost estimates used 1980 costs. No adjustments were made for future changes in these costs relative to inflation. All costs are reported in 1980 dollars. If a single repository is used for defense wastes, transportation costs for CH-TRU waste currently in surface storage and similar wastes expected to be generated by the year 2000 were estimated to be 109 million dollars. Recovery and transport of the larger buried volumes of CH-TRU waste will increase CH-TRU waste transportation costs by a factor of 70. Emphasis of truck transportation and siting of multiple repositories would reduce CH-TRU transportation costs. Transportation of HLDW to repositories for 25 years beginning in 1997 is estimated to cost $229 M in 1980 costs and dollars. HLDW transportation costs could either increase or decrease with the selection of a final canister configuration. HLDW transportation costs are reduced when multiple repositories exist and emphasis is placed on truck transport.

Andrews, W.B.; Cole, B.M.; Engel, R.L.; Oylear, J.M.

1982-08-01T23:59:59.000Z

244

Support for Cost Analyses on  

NLE Websites -- All DOE Office Websites (Extended Search)

5 Hartwell Ave 5 Hartwell Ave Lexington, MA 02421 Support for Cost Analyses on Solar-Driven High Temperature Thermochemical Water-Splitting Cycles Final Report to: Department of Energy Order DE-DT0000951 Report prepared by TIAX LLC Reference D0535 February 22, 2011 Matt Kromer (Principal Investigator) Kurt Roth Rosalind Takata Paul Chin Copyright 2011, TIAX LLC Notice: This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents

245

Estimated Cost Description Determination Date:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Title, Location Title, Location Estimated Cost Description Determination Date: 2010 LCLS Undulator 2 is envisioned to be a 0.2 - 2keV FEL x-ray source, capable of delivering x-rays to End Station A (ESA), located in the existing Research Yard at SLAC. It will also be configurable as a non- FEL hard x-ray source capable of delivering a chirped x-ray pulse for single-shot broad-spectrum measurements. The project would entail reconstruction of the electron beam transport to End Station A, construction and installation of a new undulator in the tunnel upstream of ESA and beam dump, and construction and installation of x-ray transport, optics, and diagnostics in ESA. It also includes the construction of an annex to End Station A , providing hutches for experiment stations.

246

COST AND QUALITY TABLES 95  

Gasoline and Diesel Fuel Update (EIA)

5 Tables 5 Tables July 1996 Energy Information Administration Office of Coal, Nuclear, Electric and Alternate Fuels U.S. Department of Energy Washington DC 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the Department of Energy. The information contained herein should not be construed as advocating or reflecting any policy position of the Department of Energy or any other organization. Contacts The annual publication Cost and Quality of Fuels for Electric Utility Plants (C&Q) will no longer be pub- lished by the EIA. The tables presented in this docu- ment are intended to replace that annual publication. Questions regarding the availability of these data should be directed to: Coal and Electric Data and Renewables Division

247

Software Cost Estimation and Control  

E-Print Network (OSTI)

this report, provided that the source of such material is fully acknowledged. Additional copies are available free of charge from: Publication Office Institute for Information Technology National Research Council of Canada Ottawa, Ontario, Canada K1A 0R6 Copyright 1994 par Conseil national de recherches du Canada Il est permis de citer de courts extraits et de reproduire des figures ou tableaux du prsent rapport, condition d'en identifier clairement la source. Des exemplaires supplmentaires peuvent tre obtenus gratuitement l'addresse suivante: Bureau des publications Institut de technologie de l'information Conseil national de recherches du Canada Ottawa (Ontario) Canada K1A 0R6 Software Cost Estimation 1 Table of Contents

M. R. Vigder; A.W. Kark

1994-01-01T23:59:59.000Z

248

Coking Coal Import Costs - EIA  

Gasoline and Diesel Fuel Update (EIA)

Import Costs for Selected Countries Import Costs for Selected Countries U.S. Dollars per Metric Ton1 (Average Unit Value, CIF2) Country 2001 2002 2003 2004 2005 2006 2007 2008 2009 Belgium 48.67 46.59 49.25 78.98 108.68 126.85 120.51 163.26 NA France 52.47 60.26 62.05 75.46 109.69 133.48 124.63 212.51 NA Germany 51.30 59.53 64.00 74.74 113.48 135.72 133.45 182.72 NA Italy 55.48 57.67 60.39 77.24 103.02 112.05 118.05 118.97 NA Japan 41.13 42.14 41.73 61.40 88.80 93.10 88.43 184.13 NA Netherlands 55.37 55.55 63.00 78.99 104.06 125.70 125.84 187.06 NA Spain 52.32 57.10 60.44 79.30 116.50 134.81 124.87 211.23 NA United Kingdom 53.14 56.81 57.34 77.73 116.05 128.51 120.24 187.79 NA 1To convert U.S. dollars per metric ton to U.S. dollars per short ton

249

Steam Coal Import Costs - EIA  

Gasoline and Diesel Fuel Update (EIA)

Steam Coal Import Costs for Selected Countries Steam Coal Import Costs for Selected Countries U.S. Dollars per Metric Ton1 (Average Unit Value, CIF2) Country 2001 2002 2003 2004 2005 2006 2007 2008 2009 Belgium 46.96 39.34 39.76 66.29 70.83 70.95 82.81 150.58 NA Denmark 40.78 31.65 50.27 56.29 61.84 59.15 75.20 113.34 NA Finland 40.83 37.08 39.99 58.45 62.80 67.65 72.64 134.21 NA France 45.36 42.59 42.63 64.08 75.23 72.92 84.49 135.53 NA Germany 41.46 36.80 39.00 61.22 72.48 70.12 81.49 138.84 NA Ireland3 45.25 47.88 50.08 80.90 74.91 101.78 125.15 143.08 NA Italy 44.83 41.25 42.45 63.54 73.20 69.16 86.00 143.68 NA Japan 37.95 36.95 34.93 51.48 62.73 63.33 70.92 125.42 NA Netherlands 40.09 35.81 37.27 55.09 68.86 68.57 79.12 133.50 NA

250

Biotrans: Cost Optimization Model | Open Energy Information  

Open Energy Info (EERE)

Biotrans: Cost Optimization Model Biotrans: Cost Optimization Model Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Biotrans: Cost Optimization Model Focus Area: Ethanol Topics: Market Analysis Website: www.ecn.nl/units/ps/models-and-tools/biotrans/ Equivalent URI: cleanenergysolutions.org/content/biotrans-cost-optimization-model,http Language: English Policies: Deployment Programs DeploymentPrograms: Demonstration & Implementation BIOTRANS optimizes the biofuel supply chain allocation by finding the least-cost configuration of resources and trade to meet a specified biofuel demand in the European transportation sector. The user can constrain the optimization by inputting a number of economic and technological assumptions for a specific target year. References Retrieved from

251

2006 Update of Business Downtime Costs  

SciTech Connect

The objective of this paper is to assess the downtime cost of power outages to businesses in the commercial and industrial sectors, updating and improving upon studies that have already been published on this subject. The goal is to produce a study that, relative to existing studies, (1) applies to a wider set of business types (2) reflects more current downtime costs, (3) accounts for the time duration factor of power outages, and (4) includes data on the costs imposed by real outages in a well-defined market. This study examines power outage costs in 11 commercial subsectors and 5 industrial subsectors, using data on downtime costs that was collected in the 1990's. This study also assesses power outage costs for power outages of 20 minutes, 1 hour, and 4 hours duration. Finally, this study incorporates data on the costs of real power outages for two business subsectors. However, the current limited state of data availability on the topic of downtime costs means there is room to improve upon this study. Useful next steps would be to generate more recent data on downtime costs, data that covers outages shorter than 20 minutes duration and longer than 4 hours duration, and more data that is based on the costs caused by real-world outages. Nevertheless, with the limited data that is currently available, this study is able to generate a clear and detailed picture of the downtime costs that are faced by different types of businesses.

Hinrichs, Mr. Doug [Sentech, Inc.; Goggin, Mr. Michael [Sentech, Inc.

2007-01-01T23:59:59.000Z

252

Low-cost inertial measurement unit.  

Science Conference Proceedings (OSTI)

Sandia National Laboratories performs many expensive tests using inertial measurement units (IMUs)--systems that use accelerometers, gyroscopes, and other sensors to measure flight dynamics in three dimensions. For the purpose of this report, the metrics used to evaluate an IMU are cost, size, performance, resolution, upgradeability and testing. The cost of a precision IMU is very high and can cost hundreds of thousands of dollars. Thus the goals and results of this project are as follows: (1) Examine the data flow in an IMU and determine a generic IMU design. (2) Discuss a high cost IMU implementation and its theoretically achievable results. (3) Discuss design modifications that would save money for suited applications. (4) Design and implement a low cost IMU and discuss its theoretically achievable results. (5) Test the low cost IMU and compare theoretical results with empirical results. (6) Construct a more streamlined printed circuit board design reducing noise, increasing capabilities, and constructing a self-contained unit. Using these results, we can compare a high cost IMU versus a low cost IMU using the metrics from above. Further, we can examine and suggest situations where a low cost IMU could be used instead of a high cost IMU for saving cost, size, or both.

Deyle, Travis Jay

2005-03-01T23:59:59.000Z

253

Cost Study for Large Wind Turbine Blades  

SciTech Connect

The cost study for large wind turbine blades reviewed three blades of 30 meters, 50 meters, and 70 meters in length. Blade extreme wind design loads were estimated in accordance with IEC Class I recommendations. Structural analyses of three blade sizes were performed at representative spanwise stations assuming a stressed shell design approach and E-glass/vinylester laminate. A bill of materials was prepared for each of the three blade sizes using the laminate requirements prepared during the structural analysis effort. The labor requirements were prepared for twelve major manufacturing tasks. TPI Composites developed a conceptual design of the manufacturing facility for each of the three blade sizes, which was used for determining the cost of labor and overhead (capital equipment and facilities). Each of the three potential manufacturing facilities was sized to provide a constant annual rated power production (MW per year) of the blades it produced. The cost of the production tooling and overland transportation was also estimated. The results indicate that as blades get larger, materials become a greater proportion of total cost, while the percentage of labor cost is decreased. Transportation costs decreased as a percentage of total cost. The study also suggests that blade cost reduction efforts should focus on reducing material cost and lowering manufacturing labor, because cost reductions in those areas will have the strongest impact on overall blade cost.

ASHWILL, THOMAS D.

2003-05-01T23:59:59.000Z

254

2006 Update of Business Downtime Costs  

SciTech Connect

The objective of this paper is to assess the downtime cost of power outages to businesses in the commercial and industrial sectors, updating and improving upon studies that have already been published on this subject. The goal is to produce a study that, relative to existing studies, (1) applies to a wider set of business types (2) reflects more current downtime costs, (3) accounts for the time duration factor of power outages, and (4) includes data on the costs imposed by real outages in a well-defined market. This study examines power outage costs in 11 commercial subsectors and 5 industrial subsectors, using data on downtime costs that was collected in the 1990's. This study also assesses power outage costs for power outages of 20 minutes, 1 hour, and 4 hours duration. Finally, this study incorporates data on the costs of real power outages for two business subsectors. However, the current limited state of data availability on the topic of downtime costs means there is room to improve upon this study. Useful next steps would be to generate more recent data on downtime costs, data that covers outages shorter than 20 minutes duration and longer than 4 hours duration, and more data that is based on the costs caused by real-world outages. Nevertheless, with the limited data that is currently available, this study is able to generate a clear and detailed picture of the downtime costs that are faced by different types of businesses.

Hinrichs, Mr. Doug [Sentech, Inc.; Goggin, Mr. Michael [Sentech, Inc.

2007-01-01T23:59:59.000Z

255

Well cost estimates in various geothermal regions  

DOE Green Energy (OSTI)

A project to estimate well costs in regions of current geothermal activity has been initiated. Costs associated with commonly encountered drilling problems will be included. Activity-based costing techniques will be employed to allow the identification of cost drivers and the evaluation of the economic effects of new technologies and operational procedures on well costs. The sensitivity of well costs to a number of parameters such as rate-of-penetration and daily operating costs will be examined. Additional sensitivity analyses and trade-off studies will evaluate the efficiency of various operational practices and preventive, as well as remedial, actions. These efforts should help provide an understanding of the consumption of resources in geothermal drilling.

Pierce, K.G.; Bomber, T.M. [Sandia National Labs., Albuquerque, NM (United States); Livesay, B.J. [Livesay Consultants, Encinitas, CA (United States)

1997-06-01T23:59:59.000Z

256

Facilities & Administrative (F&A) Costs at NIU F&A costs at NIU  

E-Print Network (OSTI)

project, instructional or public service activity. Such costs include utilities, buildings and facilities accrue only as projects dollars are expended. As a result, F&A costs are collected and allocatedFacilities & Administrative (F&A) Costs at NIU #12;F&A costs at NIU What are Facilities

Karonis, Nicholas T.

257

The unit cost factors and calculation methods for decommissioning - Cost estimation of nuclear research facilities  

SciTech Connect

Available in abstract form only. Full text of publication follows: The uncertainties of decommissioning costs increase high due to several conditions. Decommissioning cost estimation depends on the complexity of nuclear installations, its site-specific physical and radiological inventories. Therefore, the decommissioning costs of nuclear research facilities must be estimated in accordance with the detailed sub-tasks and resources by the tasks of decommissioning activities. By selecting the classified activities and resources, costs are calculated by the items and then the total costs of all decommissioning activities are reshuffled to match with its usage and objectives. And the decommissioning cost of nuclear research facilities is calculated by applying a unit cost factor method on which classification of decommissioning works fitted with the features and specifications of decommissioning objects and establishment of composition factors are based. Decommissioning costs of nuclear research facilities are composed of labor cost, equipment and materials cost. Of these three categorical costs, the calculation of labor costs are very important because decommissioning activities mainly depend on labor force. Labor costs in decommissioning activities are calculated on the basis of working time consumed in decommissioning objects and works. The working times are figured out of unit cost factors and work difficulty factors. Finally, labor costs are figured out by using these factors as parameters of calculation. The accuracy of decommissioning cost estimation results is much higher compared to the real decommissioning works. (authors)

Kwan-Seong Jeong; Dong-Gyu Lee; Chong-Hun Jung; Kune-Woo Lee [Korea Atomic Energy Research Institute, Deokjin-dong 150, Yuseong-gu, Daejeon 305-353 (Korea, Republic of)

2007-07-01T23:59:59.000Z

258

Fusion reactor design studies: standard unit costs and cost scaling rules  

SciTech Connect

This report establishes standard unit costs and scaling rules for estimating costs of material, equipment, land, and labor components used in magnetic confinement fusion reactor plant construction and operation. Use of the standard unit costs and scaling rules will add uniformity to cost estimates, and thus allow valid comparison of the economic characteristics of various reactor concepts.

Schulte, S.C.; Bickford, W.E.; Willingham, C.E.; Ghose, S.K.; Walker, M.G.

1979-09-01T23:59:59.000Z

259

Department of Energy Environmental Management cost infrastructure development program: Cost analysis requirements  

SciTech Connect

This report was prepared to support development of the Department of Energy Environmental Management cost infrastructure -- a new capability to independently estimate and analyze costs. Currently, the cost data are reported according to a structure that blends level of effort tasks with product and process oriented tasks. Also. the budgetary inputs are developed from prior year funding authorizations and from contractor-developed parametric estimates that have been adjusted to planned funding levels or appropriations. Consequently, it is difficult for headquarters and field-level activities to use actual cost data and technical requirements to independently assess the costs generated and identify trends, potential cost savings from process improvements, and cost reduction strategies.

Custer, W.R. Jr.; Messick, C.D.

1996-03-31T23:59:59.000Z

260

New England Wind Forum: Cost Trends  

Wind Powering America (EERE)

Cost Trends Cost Trends Figure 1: Cost of Energy and Cumulative Domestic Capacity This graph shows how the cumulative domestic wind capacity (MW) has increased since 1980, while the cost of energy from wind power has declined by a factor of approximately 20 times during the same period but has increased slightly since 2001. Click on the image to view a larger version. This graph shows how the cumulative domestic wind capacity (MW) has increased since 1980, while the cost of energy from wind power has declined by a factor of approximately 20 times during the same period but has increased slightly since 2001. View a larger version of the graph. Overall, the wind industry is experiencing long-term decreases in the cost to produce wind-generated electricity (Figure 1), despite recent short-term increases in upfront equipment costs. Even in the short term, however, the effect of increases in up-front capital costs on the cost of energy from wind power projects has been dampened by improvements in energy capture from the wind and decreases in operating and maintenance costs.

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

GAO Cost Estimating and Assessment Guide  

E-Print Network (OSTI)

The U.S. Government Accountability Office is responsible for, among other things, assisting the Congress in its oversight of the federal government, including agencies stewardship of public funds. To use public funds effectively, the government must meet the demands of todays changing world by employing effective management practices and processes, including the measurement of government program performance. In addition, legislators, government officials, and the public want to know whether government programs are achieving their goals and what their costs are. To make those evaluations, reliable cost information is required and federal standards have been issued for the cost accounting that is needed to prepare that information. 1 We developed the Cost Guide in order to establish a consistent methodology that is based on best practices and that can be used across the federal government for developing, managing, and evaluating capital program cost estimates. For the purposes of this guide, a cost estimate is the summation of individual cost elements, using established methods and valid data, to estimate the future costs of a program, based on what is known today. 2 The management of a cost estimate involves continually updating the estimate with actual data as they become available, revising the estimate to reflect changes, and analyzing differences between estimated and actual costsfor example, using data from a reliable earned value management (EVM) system. 3 The ability to generate reliable cost estimates is a critical function, necessary to support the Office of Management and Budgets (OMB) capital programming process. 4 Without this ability, agencies are at risk of experiencing cost overruns, missed deadlines, and performance shortfallsall recurring problems that our program assessments too often reveal. Furthermore, cost increases often mean that the government

Best Practices For Developing

2009-01-01T23:59:59.000Z

262

Standardized Cost Structure for the Environmental Industry  

Science Conference Proceedings (OSTI)

The underlying key to developing successful estimates, tracking project costs, and utilizing historical project cost information is the development of standardized and well-defined hierarchical listing of cost categories. Committees within the U.S. Federal agencies have pioneered efforts toward developing the Environmental Cost Element Structure (ECES), which is key in achieving these goals. The ECES was developed using an iterative process with input from federal agencies and industry. Experts from several disciplines participated including engineers, cost estimators, project/program managers, and contract personnel. The ECES benefits from an intense analytical effort, the knowledge gained from the maturation of the environmental industry, and incorporation of past user's experiences. Building upon this foundation, the E06 committee of the ASTM International has now fully developed and published a standard (ASTM 2150-04) that provides standardized cost categories with complete cost category definitions. This standard affords environmental and nuclear D and D project managers the opportunity to have a well defined hierarchical listing of their estimates and actual costs, readily adapted to performing summations and roll-ups, supported by a multi-level dictionary specifically defining the content of the cost elements as well as the summations. Owing to the dynamic nature of the environmental technologies, efforts need to be made to continue to update this standard by adding new technologies and methods as they are developed and employed in the field. Lastly, the Environmental Cost Element Structure that is embodied in this standard also presents opportunities to develop historical cost databases and comprehensive life cycle cost estimates and standardized cost estimating tools. (authors)

Skokan, B.; Melamed, D.; Guevara, K. [US DOE, Office of Project Planning and Controls, EM-32, 1000 Independence Ave. SW, Washington, DC 20585 (United States); Mallick, P. [US DOE, Office of Performance Assessment, EM-43, 1000 Independence Ave. SW, Washington, DC 20585 (United States); Bierman, G. [Legin Group, Inc., P.O. Box 3788, Gaithersburg, MD 20885-3788 (United States); Marshall, H.E. [Building and Fire Research Laboratory, National Institute of Standards and Technology, 100 Bureau Drive, Stop 8603, Gaithersburg, MD 20899-8603 (United States)

2006-07-01T23:59:59.000Z

263

Thermodynamic cost of acquiring information  

E-Print Network (OSTI)

Connections between information theory and thermodynamics have proven to be very useful to establish bounding limits for physical processes. Ideas such as Landauer's erasure principle and information assisted work extraction have greatly contributed not only to enlarge our understanding about the fundamental limits imposed by nature, but also to enlighten the path for practical implementations of information processing devices. The intricate information-thermodynamics relation also entails a fundamental limit on parameter estimation, establishing a thermodynamic cost for information acquisition. More specifically, we show that the amount of information that can be encoded in a physical system (and consequently extracted) by means of any process is limited by the dissipated work during the implementation of the process. This includes a thermodynamic trade-off for information acquisition. Likewise, any information acquisition process is ultimately limited by the second law of thermodynamics. Such a trade-off may find applications in several areas of knowledge, since parameter estimation lies in the building basis of all natural sciences and several technological applications, such as metrology.

Kaonan Micadei; Roberto M. Serra; Lucas C. Celeri

2012-11-02T23:59:59.000Z

264

A. Appendix: Cost Estimate for the Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

Appendix: Cost Estimate for the Facility Appendix: Cost Estimate for the Facility Determining the cost of a facility as complex as the neutrino source presented here is a very difficult task within the short time period of six months. Three factors contribute to the uncertainty significantly: 1. The number of subsystems in the facility, which are described throughout the report, is comparatively large. All of the subsystems contribute a considerable amount of complexity and cost that have to be addressed by specific expertise in order to find a technical solution and a reasonable cost estimate. The variety of technologies is large and many of them have to be pushed to the edge or beyond and therefore has to be addressed with an appropriate R&D program. Cost savings from mass production will not be

265

2017 Levelized Costs AEO 2012 Early Release  

Gasoline and Diesel Fuel Update (EIA)

2018 Levelized Costs AEO 2013 1 2018 Levelized Costs AEO 2013 1 January 2013 Levelized Cost of New Generation Resources in the Annual Energy Outlook 2013 This paper presents average levelized costs for generating technologies that are brought on line in 2018 1 as represented in the National Energy Modeling System (NEMS) for the Annual Energy Outlook 2013 (AEO2013) Early Release Reference case. 2 Both national values and the minimum and maximum values across the 22 U.S. regions of the NEMS electricity market module are presented. Levelized cost is often cited as a convenient summary measure of the overall competiveness of different generating technologies. It represents the per-kilowatthour cost (in real dollars) of building and operating a generating plant over an assumed financial life and duty cycle. Key

266

Vehicle Cost Calculator | Open Energy Information  

Open Energy Info (EERE)

Vehicle Cost Calculator Vehicle Cost Calculator Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Vehicle Cost Calculator Agency/Company /Organization: National Renewable Energy Laboratory Sector: Energy Focus Area: Transportation Phase: Evaluate Options Resource Type: Online calculator User Interface: Website Website: www.afdc.energy.gov/calc/ Web Application Link: www.afdc.energy.gov/calc/ OpenEI Keyword(s): Energy Efficiency and Renewable Energy (EERE) Tools Language: English References: Vehicle Cost Calculator[1] Logo: Vehicle Cost Calculator Calculate the total cost of ownership and emissions for makes and models of most vehicles, including alternative fuel and advanced technology vehicles. Overview This tool uses basic information about your driving habits to calculate

267

Personal Nonmonetary Costs of Motor-Vehicle Use  

E-Print Network (OSTI)

the Full Social Costs and Benefits of Transportation, ed. bythe Full Social Costs and Benefits of Transportation, ed. byTransportation Crashes, in Measuring the Full Social Costs

Delucchi, Mark A.

1998-01-01T23:59:59.000Z

268

External Costs of Transport in the U.S.  

E-Print Network (OSTI)

The social costs of intercity transportation: a review andthe Full Social Costs and Benefits of Transportation,in full social cost-benefit analyses of transportation

Delucchi, Mark A.; McCubbin, Donald R.

2010-01-01T23:59:59.000Z

269

Cost model for a small glass manufacturing enterprise.  

E-Print Network (OSTI)

??The cost model developed is for small, glass-manufacturing enterprises to help themdetermine their product costs. It estimates the direct cost in glass manufacturing such as (more)

Gopisetti, Swetha.

2008-01-01T23:59:59.000Z

270

Evaluation of I-80 Long-Life Corridor Costs  

E-Print Network (OSTI)

the expenditures for these projects, costs were divided into2 illustrates the Project Cost Breakdown of the Actual Bid18 percent higher than Project Cost Breakdown Original Bid

Santero, Nicholas J; Nokes, William; Harvey, John T

2005-01-01T23:59:59.000Z

271

Survey quantifies cost of organic milk production in California  

E-Print Network (OSTI)

In this survey, production costs for California organicsuch as higher production and feed costs, lowered veterinarya comprehensive dairy cost production survey, which involves

Butler, Leslie J.

2002-01-01T23:59:59.000Z

272

Dynamics of the Oil Transition: Modeling Capacity, Costs, and Emissions  

E-Print Network (OSTI)

or design of improved production cost models. to assess thelearning which lowers production costs, and resourcewhich increases production costs. Each of these modules are

Brandt, Adam R.; Farrell, Alexander E.

2008-01-01T23:59:59.000Z

273

Cost Sharing for the Economic Lot-Sizing Problem with ...  

E-Print Network (OSTI)

cost and production costs. In addition, in each period, the retailer incurs holding costs for storing serviceable product and returned product in inventory.

274

Dynamics of the Oil Transition: Modeling Capacity, Costs, and Emissions  

E-Print Network (OSTI)

extra-heavy oil and shale have zero Resource- Cost), whileof the Oil Transition: Modeling Capacity, Costs, andof the oil transition: modeling capacity, costs, and

Brandt, Adam R.; Farrell, Alexander E.

2008-01-01T23:59:59.000Z

275

External Costs of Transport in the U.S.  

E-Print Network (OSTI)

European External Cost Estimates, Transportation Researchin the external-cost estimates reviewed here. Althoughtruck shipment in 1991 (low-cost estimate from Table 1-A5 of

Delucchi, Mark A.; McCubbin, Donald R.

2010-01-01T23:59:59.000Z

276

Process-Based Cost Modeling to Support Target Value Design  

E-Print Network (OSTI)

Maintaining Activity-based Cost Estimates with Feature-Based2004). Effective Cost Estimate and Construction Processesof new designs. These cost estimates are inflated by the

Nguyen, Hung Viet

2010-01-01T23:59:59.000Z

277

Underestimating Costs in Public Works Projects: Error or Lie?  

E-Print Network (OSTI)

1964). Errors in project cost estimates. Indian Eco- nomicSystematic errors in cost estimates for public investmentprojects compare in cost estimate experience? (Reprint No.

Flyvbjerg, Bent; Holm, Mette Skamris; Buhl, Sren

2006-01-01T23:59:59.000Z

278

Estimating the Cost of Large Superconducting Thin Solenoid Magnets  

E-Print Network (OSTI)

for making a preliminary cost estimate of proposed one of afor making a budgetary cost estimate of relatively lightbut in other cases, the cost estimates are wildly different

Green, M.A.

2011-01-01T23:59:59.000Z

279

Wind Power: How Much, How Soon, and At What Cost?  

E-Print Network (OSTI)

the potential and costs for rapid wind energy deployment inincremental costs of achieving 20% wind energy are projectedwind energy and that allow the model to incorporate the costs

Wiser, Ryan H

2010-01-01T23:59:59.000Z

280

Subject: Cost and Price Analysis | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Subject: Cost and Price Analysis Subject: Cost and Price Analysis Subject: Cost and Price Analysis More Documents & Publications Acquisition Letter 2009-03 Acquisition...

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

AVCEM: Advanced-Vehicle Cost and Energy Use Model  

E-Print Network (OSTI)

of the battery, according to the battery cost equations (seediscussion of battery cost above). There actually are twoin the amount and cost of fuel-storage, battery, vehicle

Delucchi, Mark

2005-01-01T23:59:59.000Z

282

CLASAdministratorJobAid CostSharing  

E-Print Network (OSTI)

per square foot from FPM. Pro-rate by percentage of time that the office is used for the project x;CLASAdministratorJobAid CostSharing Preparedby:M.Kuznia8/1/11 Page2 Use of an office: determine square footageCLASAdministratorJobAid CostSharing Preparedby:M.Kuznia8/1/11 Page1 I. Definitions A. Cost

Baskaran, Mark

283

EUV lithography cost of ownership analysis  

SciTech Connect

The cost of fabricating state-of-the-art integrated circuits (ICs) has been increasing and it will likely be economic rather than technical factors that ultimately limit the progress of ICs toward smaller devices. It is estimated that lithography currently accounts for approximately one-third the total cost of fabricating modem ICs({sup 1}). It is expected that this factor will be fairly stable for the forseeable future, and as a result, any lithographic process must be cost-effective before it can be considered for production. Additionally, the capital equipment cost for a new fabrication facility is growing at an exponential rate (2); it will soon require a multibillion dollar investment in capital equipment alone to build a manufacturing facility. In this regard, it is vital that any advanced lithography candidate justify itself on the basis of cost effectiveness. EUV lithography is no exception and close attention to issues of wafer fabrication costs have been a hallmark of its early history. To date, two prior cost analyses have been conducted for EUV lithography (formerly called {open_quotes}Soft X-ray Projection Lithography{close_quotes}). The analysis by Ceglio, et. al., provided a preliminary system design, set performance specifications and identified critical technical issues for cost control. A follow-on analysis by Early, et.al., studied the impact of issues such as step time, stepper overhead, tool utilization, escalating photoresist costs and limited reticle usage on wafer exposure costs. This current study provides updated system designs and specifications and their impact on wafer exposure costs. In addition, it takes a first cut at a preliminary schematic of an EUVL fabrication facility along with an estimate of the capital equipment costs for such a facility.

Hawryluk, A.M.; Ceglio, N.M.

1995-01-19T23:59:59.000Z

284

Evaluating Utility Costs from Cogeneration Facilities  

E-Print Network (OSTI)

This paper describes the method of calculation of incremental costs of steam, condensate, feedwater and electricity produced by the industrial cogeneration plant. (This method can also be applied to other energy production plants.) It also shows how to evaluate the energy consumption by the process facility using the costs determined by the method. The paper gives practical examples of calculation of the incremental costs of various utilities and emphasizes the importance of the calculation accuracy.

Polsky, M. P.

1983-01-01T23:59:59.000Z

285

Biomass Power Project Cost Analysis Database  

Science Conference Proceedings (OSTI)

The development of biomass power projects presents a variety of challenges that result in high capital costs associated with developing, engineering, procuring, constructing, and operating biomass power projects. Although projects that rely on more homogeneous fuels such as natural gas must still account for site-specific issues when estimating development and construction costs, the complexities are not comparable.Recognizing the difficulties in estimating the capital costs for ...

2012-12-21T23:59:59.000Z

286

Cost modelling using automobile warranty data.  

E-Print Network (OSTI)

??This thesis sets out to model, from the manufacturer's point of view, the warranty cost of a repairable product. The product can be a complex (more)

Summit, Raymond

2004-01-01T23:59:59.000Z

287

Certificate of Current Cost and Pricing Data  

NLE Websites -- All DOE Office Websites (Extended Search)

CERTIFICATE OF CURRENT COST AND PRICING DATA (OCT 1997) CERTIFICATE OF CURRENT COST AND PRICING DATA (OCT 1997) This is to certify that, to the best of my knowledge and belief, the cost or pricing data (as defined in section 15.401 of the Federal Acquisition Regulation (FAR) and required under FAR subsection 15.403-4) submitted, either actually or by specific identification in writing, to the Contracting Officer or to the Contracting Officer's representative in support of * are accurate, complete, and current as of **. This certification includes the cost or pricing data supporting any advance agreements and forward pricing rate agreements between the offeror and the Government that are

288

NETL: News Release - Favorable Supplies, Costs, Environmental...  

NLE Websites -- All DOE Office Websites (Extended Search)

environmental and cost profiles in comparison to other energy sources. The development of shale gas and other unconventional natural gas wells requires the use of technologies that...

289

Information erasure without an energy cost  

E-Print Network (OSTI)

Landauer argued that the process of erasing the information stored in a memory device incurs an energy cost in the form of a minimum amount of mechanical work. We find, however, that this energy cost can be reduced to zero by paying a cost in angular momentum or any other conserved quantity. Erasing the memory of Maxwell's demon in this way implies that work can be extracted from a single thermal reservoir at a cost of angular momentum and an increase in total entropy. The implications of this for the second law of thermodynamics are assessed.

Joan A. Vaccaro; Stephen M. Barnett

2010-04-29T23:59:59.000Z

290

Incorporating psychological influences in probabilistic cost analysis  

E-Print Network (OSTI)

Press, New York, 1981. MIL-HDBK-881, Handbook Work BreakdownWBS level-3 cost elements [MIL- HDBK-881, 1998]. In general,

Kujawski, Edouard; Alvaro, Mariana; Edwards, William

2004-01-01T23:59:59.000Z

291

On the benefits and costs of microgrids.  

E-Print Network (OSTI)

??This thesis examines the benefits that Microgrids can provide to a variety of stakeholders and considers their costs. A flexible framework is proposed in which (more)

Weyrich Morris, Gregory

2013-01-01T23:59:59.000Z

292

On Traveling Salesman Games with Asymmetric Costs  

E-Print Network (OSTI)

May 1, 2012 ... We construct a stable cost allocation with budget balance guarantee equal ... and a previously unknown connection to linear production games.

293

Low Cost Powder Metal Turbine Components  

Science Conference Proceedings (OSTI)

Driving down processing costs on military and commercial aerospace ... studies using production alloys to turbine disk property results will be presented.

294

Middle East Production Costs - Energy Information Administration  

U.S. Energy Information Administration (EIA)

Persian Gulf Oil Production Capacity and Development Cost Forecast (without additional development to replace production) Based on Low-Case Weighted Average

295

Minimum cost model energy code envelope requirements  

SciTech Connect

This paper describes the analysis underlying development of the U.S. Department of Energy`s proposed revisions of the Council of American Building Officials (CABO) 1993 Model Energy Code (MEC) building thermal envelope requirements for single-family and low-rise multifamily residences. This analysis resulted in revised MEC envelope conservation levels based on an objective methodology that determined the minimum-cost combination of energy efficiency measures (EEMs) for residences in different locations around the United States. The proposed MEC revision resulted from a cost-benefit analysis from the consumer`s perspective. In this analysis, the costs of the EEMs were balanced against the benefit of energy savings. Detailed construction, financial, economic, and fuel cost data were compiled, described in a technical support document, and incorporated in the analysis. A cost minimization analysis was used to compare the present value of the total long-nm costs for several alternative EEMs and to select the EEMs that achieved the lowest cost for each location studied. This cost minimization was performed for 881 cities in the United States, and the results were put into the format used by the MEC. This paper describes the methodology for determining minimum-cost energy efficiency measures for ceilings, walls, windows, and floors and presents the results in the form of proposed revisions to the MEC. The proposed MEC revisions would, on average, increase the stringency of the MEC by about 10%.

Connor, C.C.; Lucas, R.G.; Turchen, S.J.

1994-08-01T23:59:59.000Z

296

An Examination of Avoided Costs in Utah  

E-Print Network (OSTI)

cost inpu t assumptions, the Utah Wind Working Group may wish to consider pursuing two other poss ible sources of revenue: renewable energy

Bolinger, Mark; Wiser, Ryan

2005-01-01T23:59:59.000Z

297

Lower Cost, Nanoporous Block Copolymer Battery Separator ...  

Although the polyolefin polymer material often used for lithium battery separators costs approximately $1.30/kg, the difficult process used to make it ...

298

Hydrogen Compression, Storage, and Dispensing Cost Reduction...  

NLE Websites -- All DOE Office Websites (Extended Search)

of Materials. Storage Respondents submitted additional needs for R&D in the area of hydrogen storage: Advanced metal alloys in order to lower the cost of hydrogen...

299

Wind Turbine Design Cost and Scaling Model  

SciTech Connect

This model intends to provide projections of the impact on cost from changes in economic indicators such as the Gross Domestic Product and Producer Price Index.

Fingersh, L.; Hand, M.; Laxson, A.

2006-12-01T23:59:59.000Z

300

Aerogel commercialization: Technology, markets and costs  

SciTech Connect

Commercialization of aerogels has been slow due to several factors including cost and manufacturability issues. The technology itself is well enough developed as a result of work over the past decade by an international-community of researchers. Several extensive substantial markets appear to exist for aerogels as thermal and sound insulators, if production costs can keep prices in line with competing established materials. The authors discuss here the elements which they have identified as key cost drivers, and they give a prognosis for the evolution of the technology leading to reduced cost aerogel production.

Carlson, G.; Lewis, D.; McKinley, K.; Richardson, J.; Tillotson, T.

1994-10-07T23:59:59.000Z

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Hydrogen Production Cost Estimate Using Biomass Gasification...  

NLE Websites -- All DOE Office Websites (Extended Search)

Hydrogen Production Cost Estimate Using Biomass Gasification National Renewable Energy Laboratory 1617 Cole Boulevard * Golden, Colorado 80401-3393 303-275-3000 * www.nrel.gov...

302

Geothermal: Sponsored by OSTI -- Selected bibliography: cost...  

Office of Scientific and Technical Information (OSTI)

Selected bibliography: cost and energy savings of conservation and renewable energy technologies Geothermal Technologies Legacy Collection HelpFAQ | Site Map | Contact Us | Admin...

303

OpenEI - Unit Cost Natural Gas  

Open Energy Info (EERE)

for years 1989 through 2010 for UT at Austin; specifically, electricity usage (kWh), natural gas usage (Mcf), associated costs. Also provides water consumption for 2005...

304

Electric Vehicle Supply Equipment Installed Cost Analysis  

Science Conference Proceedings (OSTI)

More than 140,000 plug-in electric vehicles (PEVs) have been sold since December 2010. Critical to maintaining this upward trend is achievement of a diverse and available charging infrastructure. The purpose of this study is to analyze one key element of the charging infrastructurethe cost of installation. While the fuel cost of electricity to charge a PEV is significantly lower than the cost of gasoline, the cost to hire an electrician to install electric vehicle supply equipment (EVSE) for ...

2013-12-06T23:59:59.000Z

305

Cost of a Ride: The Effects of Densities on Fixed-Guideway Transit Ridership and Capital Costs  

E-Print Network (OSTI)

rail transit capital cost study update final. Washington,2005). Managing Capital Costs of Major Federally Fundedin US rail transit project cost overrun. Transportation

Guerra, Erick; Cervero, Robert

2010-01-01T23:59:59.000Z

306

The Cost of Bearing a Sword: Locomotor Costs and Compensations in Relation to a Sexually Selected Trait in Xiphophorus  

E-Print Network (OSTI)

Evaluating performance costs of sexually selected traits.result in a locomotor cost. References Allen, B. J. &Levinton, J. S. (2006). Costs of bearing a sexually selected

Oufiero, Christopher E.

2010-01-01T23:59:59.000Z

307

GAO Cost Estimating and Assessment Guide Twelve Steps of a High-Quality Cost Estimating Process  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

GAO Cost Estimating and Assessment Guide GAO Cost Estimating and Assessment Guide Twelve Steps of a High-Quality Cost Estimating Process Step Description Associated task 1 Define estimate's purpose Determine estimate's purpose, required level of detail, and overall scope; Determine who will receive the estimate 2 Develop estimating plan Determine the cost estimating team and develop its master schedule; Determine who will do the independent cost estimate; Outline the cost estimating approach; Develop the estimate timeline 3 Define program characteristics In a technical baseline description document, identify the program's

308

Cost Estimating Handbook for Environmental Restoration  

Science Conference Proceedings (OSTI)

Environmental restoration (ER) projects have presented the DOE and cost estimators with a number of properties that are not comparable to the normal estimating climate within DOE. These properties include: An entirely new set of specialized expressions and terminology. A higher than normal exposure to cost and schedule risk, as compared to most other DOE projects, due to changing regulations, public involvement, resource shortages, and scope of work. A higher than normal percentage of indirect costs to the total estimated cost due primarily to record keeping, special training, liability, and indemnification. More than one estimate for a project, particularly in the assessment phase, in order to provide input into the evaluation of alternatives for the cleanup action. While some aspects of existing guidance for cost estimators will be applicable to environmental restoration projects, some components of the present guidelines will have to be modified to reflect the unique elements of these projects. The purpose of this Handbook is to assist cost estimators in the preparation of environmental restoration estimates for Environmental Restoration and Waste Management (EM) projects undertaken by DOE. The DOE has, in recent years, seen a significant increase in the number, size, and frequency of environmental restoration projects that must be costed by the various DOE offices. The coming years will show the EM program to be the largest non-weapons program undertaken by DOE. These projects create new and unique estimating requirements since historical cost and estimating precedents are meager at best. It is anticipated that this Handbook will enhance the quality of cost data within DOE in several ways by providing: The basis for accurate, consistent, and traceable baselines. Sound methodologies, guidelines, and estimating formats. Sources of cost data/databases and estimating tools and techniques available at DOE cost professionals.

NONE

1990-09-01T23:59:59.000Z

309

Process-Based Cost Modeling to Support Target Value Design  

E-Print Network (OSTI)

in Designing to Target Cost. 12th Annual Conference of thethe Hurdle of First Cost: Action Research in TargetD.T. (1987). A Future for Cost Modelling: Building Cost

Nguyen, Hung Viet

2010-01-01T23:59:59.000Z

310

Electric Vehicles: Performances, Life Cycle Costs, Emissions, and Recharging Requirements  

E-Print Network (OSTI)

Table3 to the incre- no oil costs, and that Na/S batteries,costs, of vehicles Oil costs, percent ofgasoline vehiclestires are (M&R) costs (we exclude fires and oil) than ICEVs,

DeLuchi, Mark A.; Wang, Quanlu; Sperling, Daniel

1989-01-01T23:59:59.000Z

311

Societal lifetime cost of hydrogen fuel cell vehicles  

E-Print Network (OSTI)

change, and noise. Oil-use costs comprise the cost of theexcept as indicated) Oil-use cost SPR Low Best High BY ROCdirect economic costs of oil dependence including wealth

Sun, Yongling; Ogden, J; Delucchi, Mark

2010-01-01T23:59:59.000Z

312

Low-Cost Installation of Concentrating Photovoltaic  

E-Print Network (OSTI)

Low-Cost Installation of Concentrating Photovoltaic Renewable Energy Research Renewable Energy Research http://www.energy.ca.gov/research/renewabl e/index.html August 2011 The Issue Several factors inhibit the potential growth of the California photovoltaic market: high installation costs, expenses

313

Cost Reduction Strategies for Mixed Waste  

Science Conference Proceedings (OSTI)

The potential for generating mixed waste is a reality at all nuclear power plants. The report provides utilities with a means for developing cost reduction strategies to minimize the volume of waste generated, optimize treatment and disposal options, and maximize overall cost savings.

1998-12-31T23:59:59.000Z

314

The Actual Cost of Food Systems on  

E-Print Network (OSTI)

emissions and air quality); infrastructure; energy (fuel); congestion; safety; and user (tax payer) costs emissions and air quality); infrastructure; energy (fuel); congestion; safety; and user (tax payer) costs ...................................................................................................................16 Table 14: Fruit and Vegetable Consumption Rate Per Capita from County Survey

Beresnev, Igor

315

Hydrogen Refueling Station Costs in Shanghai  

E-Print Network (OSTI)

hydrogen using a steam methane reformer (SMR). The SMR is1.7 kg/h $99,000 Steam methane reformer 100 kg/day 4.2 kg/hyes yes yes a. Steam methane reformer cost, compressor cost,

Weinert, Jonathan X.; Shaojun, Liu; Ogden, J; Jianxin, Ma

2006-01-01T23:59:59.000Z

316

Estimating and understanding DOE waste management costs`  

SciTech Connect

This paper examines costs associated with cleaning up the US Department of Energy`s (DOE`s) nuclear facilities, with particular emphasis on the waste management program. Life-cycle waste management costs have been compiled and reported in the DOE Baseline Environmental Management Report (BEMR). Waste management costs are a critical issue for DOE because of the current budget constraints. The DOE sites are struggling to accomplish their environmental management objectives given funding scenarios that are well below anticipated waste management costs. Through the BEMR process, DOE has compiled complex-wide cleanup cost estimates and has begun analysis of these costs with respect to alternative waste management scenarios and policy strategies. From this analysis, DOE is attempting to identify the major cost drivers and prioritize environmental management activities to achieve maximum utilization of existing funding. This paper provides an overview of the methodology DOE has used to estimate and analyze some waste management costs, including the key data requirements and uncertainties.

Kang, J.S. [USDOE, Washington, DC (United States); Sherick, M.J. [Lockheed Idaho Technologies Co., Idaho Falls, ID (United States)

1995-12-01T23:59:59.000Z

317

The Rising Cost of Electricity Generation  

SciTech Connect

Through most of its history, the electric industry has experienced a stable or declining cost structure. Recently, the economic fundamentals have shifted and generating costs are now rising and driving up prices at a time when the industry faces new challenges to reduce CO{sub 2} emissions. New plant investment faces the most difficult economic environment in decades.

Tobey Winters

2008-06-15T23:59:59.000Z

318

Decommissioning Experiences and Lessons Learned: Decommissioning Costs  

Science Conference Proceedings (OSTI)

In 1995, the United States (US) Nuclear Regulatory Commission (NRC) issued revised decommissioning regulations that provided a dose-based site release limit and detailed supporting regulatory guidance. This report summarizes the decommissioning cost experiences at US nuclear plants, including information about radwaste volumes and the cost of radwaste disposal based on the current regulatory situation in the US.

2011-11-29T23:59:59.000Z

319

The rising cost of electricity generation  

Science Conference Proceedings (OSTI)

Through most of its history, the electric industry has experienced a stable or declining cost structure. Recently, the economic fundamentals have shifted and generating costs are now rising and driving up prices at a time when the industry faces new challenges to reduce CO{sub 2} emissions. New plant investment faces the most difficult economic environment in decades. (author)

Winters, Tobey

2008-06-15T23:59:59.000Z

320

Automotive System Cost Modeling Tool (ASCM)  

E-Print Network (OSTI)

technology vehicles (i.e., diesel, hybrid, and fuel cell) developed for improved fuel economy remains either be done through Argonne National laboratory's hybrid vehicle cost model algorithm (adapted the Tool Can Help Answer · What is the life cycle cost of today's midsize hybrid vehicle? · How does

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Comparing cost prediction models by resampling techniques  

Science Conference Proceedings (OSTI)

The accurate software cost prediction is a research topic that has attracted much of the interest of the software engineering community during the latest decades. A large part of the research efforts involves the development of statistical models based ... Keywords: Accuracy measure, Bootstrap, Confidence interval, Permutation test, Software cost estimation

Nikolaos Mittas; Lefteris Angelis

2008-05-01T23:59:59.000Z

322

Price of electricity tracks cost of living  

SciTech Connect

The retail price of electricity and the consumer price index are rising at about the same rate: 241.5 and 242.6, respectively, based on a 1967 index of 100. Increases in fossil fuel costs, wages, and the cost of borrowed funds have contributed to these changes. Details of the annual percentage changes are summarized in five tables. (DCK)

Not Available

1980-09-01T23:59:59.000Z

323

Costs of Oil Dependence: A 2000 Update  

SciTech Connect

Oil dependence remains a potentially serious economic and strategic problem for the United States. This report updates previous estimates of the costs of oil dependence to the U.S. economy and introduces several methodological enhancements. Estimates of the costs to the U.S. economy of the oil market upheavals of the last 30 years are in the vicinity of $7 trillion, present value 1998 dollars, about as large as the sum total of payments on the national debt over the same period. Simply adding up historical costs in 1998 dollars without converting to present value results in a Base Case cost estimate of $3.4 trillion. Sensitivity analysis indicates that cost estimates are sensitive to key parameters. A lower bound estimate of $1.7 trillion and an upper bound of $7.1 trillion (not present value) indicate that the costs of oil dependence have been large under almost any plausible set of assumptions. These cost estimates do not include military, strategic or political costs associated with U.S. and world dependence on oil imports.

Greene, D.L.

2000-05-17T23:59:59.000Z

324

Cost of Oil Dependence: A 2000 Update  

Science Conference Proceedings (OSTI)

Oil dependence remains a potentially serious economic and strategic problem for the United States. This report updates previous estimates of the costs of oil dependence to the U.S. economy and introduces several methodological enhancements. Estimates of the costs to the U.S. economy of the oil market upheavals of the last 30 years are in the vicinity of $7 trillion, present value 1998 dollars, about as large as the sum total of payments on the national debt over the same period. Simply adding up historical costs in 1998 dollars without converting to present value results in a Base Case cost estimate of $3.4 trillion. Sensitivity analysis indicates that cost estimates are sensitive to key parameters. A lower bound estimate of $1.7 trillion and an upper bound of $7.1 trillion (not present value) indicate that the costs of oil dependence have been large under almost any plausible set of assumptions. These cost estimates do not include military, strategic or political costs associated with U.S. and world dependence on oil imports.

Greene, D.L.; Tishchishyna, N.I.

2000-05-01T23:59:59.000Z

325

Draft Submission; Social Cost of Energy Generation  

SciTech Connect

This report is intended to provide a general understanding of the social costs associated with electric power generation. Based on a thorough review of recent literature on the subject, the report describes how these social costs can be most fully and accurately evaluated, and discusses important considerations in applying this information within the competitive bidding process. [DJE 2005

1990-01-05T23:59:59.000Z

326

An economic model of software quality costs  

Science Conference Proceedings (OSTI)

As of today there is very little knowledge is available about the economics of software quality. The costs incurred and benefits of implementing different quality practices over the software development life cycle are not well understood. There are some ... Keywords: TQM, quality cost model, software quality

Amel Kolainac; Ljubomir Lazic; Denan Avdic

2008-11-01T23:59:59.000Z

327

Cost-Based Sampling of Individual Instances  

Science Conference Proceedings (OSTI)

In many practical domains, misclassification costs can differ greatly and may be represented by class ratios, however, most learning algorithms struggle with skewed class distributions. The difficulty is attributed to designing classifiers to maximize ... Keywords: Class Imbalance, Cost-Based Learning, Sampling

William Klement; Peter Flach; Nathalie Japkowicz; Stan Matwin

2009-05-01T23:59:59.000Z

328

High Performance Metallic Materials for Cost Sensitive Applications  

Science Conference Proceedings (OSTI)

Cost Effective Synthesis, Processing and Applications of Light-Weight. Metallic Materials . ... Prospects for Cost Reduction of Titanium Via Electrolysis .

329

Low Cost Titanium Powder Development for Additive Manufacturing ...  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, 2013 TMS Annual Meeting & Exhibition. Symposium , Cost Affordable Titanium IV. Presentation Title, Low Cost Titanium Powder...

330

Mandatory Photovoltaic System Cost Analysis | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mandatory Photovoltaic System Cost Analysis Mandatory Photovoltaic System Cost Analysis Eligibility Utility Savings For Solar Buying & Making Electricity Program Information...

331

Nuclear plant cancellations: causes, costs, and consequences  

Science Conference Proceedings (OSTI)

This study was commissioned in order to help quantify the effects of nuclear plant cancellations on the Nation's electricity prices. This report presents a historical overview of nuclear plant cancellations through 1982, the costs associated with those cancellations, and the reasons that the projects were terminated. A survey is presented of the precedents for regulatory treatment of the costs, the specific methods of cost recovery that were adopted, and the impacts of these decisions upon ratepayers, utility stockholders, and taxpayers. Finally, the report identifies a series of other nuclear plants that remain at risk of canellation in the future, principally as a result of similar demand, finance, or regulatory problems cited as causes of cancellation in the past. The costs associated with these potential cancellations are estimated, along with their regional distributions, and likely methods of cost recovery are suggested.

Not Available

1983-04-01T23:59:59.000Z

332

The Full Cost of Intercity Highway Transportation  

E-Print Network (OSTI)

Introduction There has been a great deal of recent interest in identifying and measuring the full costs of transportation, particularly highways (see for instance: Keeler et al. 1974, Fuller et al. 1983, Quinet 1990, Mackenzie et al. 1992, INRETS 1993, Miller and Moffet 1993, IWW/INFRAS 1995, IBI 1995, Levinson et al. 1996, Delucchi 1996). This debate questions whether various modes of transportation are implicitly subsidized and to what extent this biases investment and usage decisions. While environmental impacts are used to stop new infrastructure, the full costs to society of transportation are not generally calculated for financing projects or charging for their use. In this paper we review the theoretical and empirical literature on the cost structure of the provision of intercity highway transportation and specify and estimate our own cost functions . In defining this framework we distinguish between internal (private) and external (social) costs, long and short run cos

David Gillen; David Levinson; David M. Levinson

1998-01-01T23:59:59.000Z

333

Estimating Renewable Energy Costs | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Estimating Renewable Energy Costs Estimating Renewable Energy Costs Estimating Renewable Energy Costs October 16, 2013 - 4:40pm Addthis Some renewable energy measures, such as daylighting, passive solar heating, and cooling load avoidance, do not add much to the cost of a building. However, renewable energy technologies typically require large, additional capital investments with savings accruing over the project's life. It is crucial that these systems are considered early on in the budgeting process. Early budget requests need to include a set of technologies that could be used to meet the project's design requirements and their associated implementation costs. The design team may respond with a different set of feasible technologies, but it is wise to have an existing placeholder in the budget. Federal agencies can continue to update the budget as decisions

334

Economic analysis of geothermal energy costs  

SciTech Connect

A description is given of the computer program, GEOCOST, and its application to some analyses of the economics of geothermal energy. GEOCOST combines both technical and economic factors into one systematic cost accounting framework. The program, which simulates production of electricity from most types of geothermal resources, is composed of two parts: a reservoir model which simulates the costs associated with the exploration, development, and operation of a geothermal reservoir; and a power-plant model which simulates the costs associated with the design, construction, and operation of the power plant. The costs from the reservoir model become the energy supply costs to the power plant. The combined reservoir and power plant models represent the complete energy production system. (LBS)

Bloomster, C.H.

1975-01-01T23:59:59.000Z

335

Simple cost model for EV traction motors  

DOE Green Energy (OSTI)

A simple cost model has been developed that allows the calculation of the OEM cost of electric traction motors of three different types, normalized as a function of power in order to accommodate different power and size. The model includes enough information on the various elements integrated in the motors to allow analysis of individual components and to factor-in the effects of changes in commodities prices. A scalable cost model for each of the main components of an electric vehicle (EV) is a useful tool that can have direct application in computer simulation or in parametric studies. For the cost model to have wide usefulness, it needs to be valid for a range of values of some parameter that determines the magnitude or size of the component. For instance, in the case of batteries, size may be determined by energy capacity, usually expressed in kilowatt-hours (kWh), while in the case of traction motors, size is better determined by rated power, usually expressed in kilowatts (kW). The simplest case is when the cost of the component in question is a direct function of its size; then cost is simply the product of its specific cost ($/unit size) and the number of units (size) in the vehicle in question. Batteries usually fall in this category (cost = energy capacity x $/kWh). But cost is not always linear with size or magnitude; motors (and controllers), for instance, become relatively less expensive as power rating increases. Traction motors, one of the main components for EV powertrains are examined in this paper, and a simplified cost model is developed for the three most popular design variations.

Cuenca, R.M.

1995-02-01T23:59:59.000Z

336

Rocky Flats Closure Unit Cost Data  

SciTech Connect

The Rocky Flats Closure Project has completed the process of stabilizing residual nuclear materials, decommissioning nuclear facilities, remediating environmental media and closing the Rocky Flats Site (Site). The project cost approximately $4.1 B and included the decommissioning of over 700 structures including 5 major plutonium facilities and 5 major uranium facilities, shipping over 14,600 cubic meters of transuranic and 565,000 cubic meters of low level radioactive waste, and remediating a 385-acre industrial area and the surrounding land. Actual costs were collected for a large variety of closure activities. These costs can be correlated with metrics associated with the facilities and environmental media to capture cost factors from the project that could be applicable to a variety of other closure projects both within and outside of the Department of Energy's weapons complex. The paper covers four general topics: the process to correlate the actual costs and metrics, an example of the correlated data for one large sub-project, a discussion of the results, and the additional activities that are planned to correlate and make this data available to the public. The process to collect and arrange the project control data of the Closure Project relied on the actual Closure Project cost information. It was used to correlate these actual costs with the metrics for the physical work, such as building area or waste generated, to support the development of parametric cost factors. The example provides cost factors for the Industrial Sites Project. The discussion addresses the strengths and weaknesses of the data, followed by a section identifying future activities to improve and extend the analyses and integrate it within the Department's Environmental Cost Analysis System. (authors)

Sanford, P.C. [1129 Business Parkway South, Westminister, MD (United States); Skokan, B. [United States Department of Energy, Washington, DC (United States)

2007-07-01T23:59:59.000Z

337

DOE G 430.1-1 Chp 22, Cost Model and Cost Estimating Software  

Directives, Delegations, and Requirements

This chapter discusses a formalized methodology is basically a cost model, which forms the basis for estimating software.

1997-03-28T23:59:59.000Z

338

Calculating Wind Integration Costs: Separating Wind Energy Value from Integration Cost Impacts  

DOE Green Energy (OSTI)

Accurately calculating integration costs is important so that wind generation can be fairly compared with alternative generation technologies.

Milligan, M.; Kirby, B.

2009-07-01T23:59:59.000Z

339

Cost and cost-effectiveness of standard methadone maintenance treatment compared to enriched 180-day methadone detoxification.  

E-Print Network (OSTI)

Theoretical foundations of cost-effectiveness analysis, in:B. & Weinstein, M. C. (Eds) Cost-effectiveness in health andK. L. & Hall, S. M. (1999) A cost-effectiveness and cost-

2004-01-01T23:59:59.000Z

340

C. ESTIMATED COSTS OF LRDP PROPOSALS C. ESTIMATED COSTS OF LRDP PROPOSALS  

E-Print Network (OSTI)

, categorized by project category by site and with total estimated project costs. Table 38 compares and the Medical Center). /d/ Aldea housing project only; additional housing is planned, but the costs are highly renovation for the laboratory buildings). Recent projects comprised 19% of the total costs compared with 17

Mullins, Dyche

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Modeling of Cost Curves 1.0 Costs of Generating Electrical Energy  

E-Print Network (OSTI)

production costs. Some typical average costs of fuel are given in the following table for coal, petroleum [1] Petroleum [2] Natural Gas [3] All Fossil Fuels Receipts (Billion BTU) Average Cost Avg. Sulfur fuel, kerosene, petroleum coke (converted to liquid petroleum, see Technical Notes for conversion

McCalley, James D.

342

Renewable Energy Planning: Multiparametric Cost Optimization; Preprint  

DOE Green Energy (OSTI)

This paper describes a method for determining the combination of renewable energy technologies that minimize life-cycle cost at a facility, often with a specified goal regarding percent of energy use from renewable sources. Technologies include: photovoltaics (PV); wind; solar thermal heat and electric; solar ventilation air preheating; solar water heating; biomass heat and electric (combustion, gasification, pyrolysis, anaerobic digestion); and daylighting. The method rests upon the National Renewable Energy Laboratory's (NREL's) capabilities in characterization of technology cost and performance, geographic information systems (GIS) resource assessment, and life-cycle cost analysis. The paper discusses how to account for the way candidate technologies interact with each other, and the solver routine used to determine the combination that minimizes life-cycle cost. Results include optimal sizes of each technology, initial cost, operating cost, and life-cycle cost, including incentives from utilities or governments. Results inform early planning to identify and prioritize projects at a site for subsequent engineering and economic feasibility study.

Walker, A.

2008-05-01T23:59:59.000Z

343

Costs to build Fermilab in 1984 dollars  

SciTech Connect

It is of current interest to examine the costs incurred to date to build Fermi National Accelerator Laboratory and to determine what those costs are when stated in FY 1984 constant dollars. The appended tables are in support of this exercise and are based on all costs for Equipment items (reduced by obsolescence) and all Plant Projects which have been appropriated through FY 1984. Also included are non-plant costs which are required to complete the Energy Saver, Tevatron I and II projects (i.e., Equipment and R and D in support of Construction). This study makes the assumption that all funding through FY 1984 will have been costed by the end of FY 1986. Those costs incurred in FY 1985 and FY 1986 have been deflated to FY 1984 dollars. See Appendix A for the DOE inflation factors used in the conversion to FY 1984 dollars. The costs are identified in three categories. The Accelerator Facilities include all accelerator components, the buildings which enclose them and utilities which support them. The Experimental Facilities include all beam lines, enclosures, utilities and experimental equipment which are usable in current experimental programs. The Support Facilities include lab and office space, shops, assembly facilities, roads, grounds and the utilities which do not specifically support the Accelerator or Experimental Facilities, etc.

Jordan, N.G.; Livdahl, P.V.

1984-02-01T23:59:59.000Z

344

Renewable Energy Planning: Multiparametric Cost Optimization  

Science Conference Proceedings (OSTI)

This paper describes a method for determining the combination of renewable energy technologies that minimize life-cycle cost at a facility, often with a specified goal regarding percent of energy use from renewable sources. Technologies include: photovoltaics (PV); wind; solar thermal heat and electric; solar ventilation air preheating; solar water heating; biomass heat and electric (combustion, gasification, pyrolysis, anaerobic digestion); and daylighting. The method rests upon the National Renewable Energy Laboratory's (NREL's) capabilities in characterization of technology cost and performance, geographic information systems (GIS) resource assessment, and life-cycle cost analysis. The paper discusses how to account for the way candidate technologies interact with each other, and the solver routine used to determine the combination that minimizes life-cycle cost. Results include optimal sizes of each technology, initial cost, operating cost, and life-cycle cost, including incentives from utilities or governments. Results inform early planning to identify and prioritize projects at a site for subsequent engineering and economic feasibility study.

Walker, A.

2008-01-01T23:59:59.000Z

345

Costs of Oil Dependence: A 2000 Update  

E-Print Network (OSTI)

.............................................................. ix 1. INTRODUCTION ........................................................ 1 2. COST COMPONENTS .................................................... 7 2.1 LOSS OF POTENTIAL GDP ......................................... 7 2.2 MACROECONOMIC ADJUSTMENT COSTS ........................... 7 2.3 TRANSFER OF WEALTH ........................................... 8 3. MEASURING THE COSTS ................................................ 9 3.1 TRANSFER OF WEALTH ........................................... 9 3.2 LOSS OF POTENTIAL GDP ........................................ 11 3.3 MACROECONOMIC ADJUSTMENT LOSSES ......................... 14 4. DATA ................................................................ 17 4.1 EMPIRICAL ESTIMATES OF PRICE SLOPES AND ADJUSTMENT RATES OF OIL SUPPLY AND DEMAND IN THE UNITED STATES ............. 17 5. RESULTS ............................................................. 21 5.1 SENSITIVITY ANALYSIS .....

David L. Greene; Nataliya I. Tishchishyna

2000-01-01T23:59:59.000Z

346

How to Reduce Energy Supply Costs  

E-Print Network (OSTI)

Rising energy costs have many businesses looking for creative ways to reduce their energy usage and lower the costs of energy delivered to their facilities. This paper explores innovative renewable and alternative energy technologies that can help customers control their supply-side costs of energy. Specific topics include distributive wind power generation and solid fuel boilers. It identities factors to consider in determining whether these technologies are economically viable for customers and stresses the importance of fully researching alternatives before committing to major equipment investments.

Swanson, G.

2007-01-01T23:59:59.000Z

347

HNPF LIQUID WASTE DISPOSAL COST STUDY  

SciTech Connect

The HNPF cost analysis for waste disposal was made on the basis of 10,000 gallons of laundry waste and 9,000 gallons of other plant waste per year. The costs are compared for storage at HNPF site for 10 yr, packaging and shipment to AEC barial ground, packaging and shipment for sea disposal, and disposal by licensed vendor. A graphical comparison is given for the yearly costs of disposal by licensed vendor and the evaporator system as a function of waste volume. Recommendations are included for the handling of the wastes expected from HNPF operations. (B.O.G.)

Piccot, A.R.

1959-11-01T23:59:59.000Z

348

Agricultural scientists cut alcohol fuel costs  

Science Conference Proceedings (OSTI)

Scientists at the US Department of Agriculture have succeeded in lowering the cost of making alcohol from corn by 15 cents to $1.64 per gallon. The cost of drying distillers' solubles dropped because at the end of each cooking/fermenting/distilling run, the solubles are used for cooking, cooling and fermenting in the next run. One evaporation of solubles is required after 10 runs, so energy cost is cut from 17 cents to 1.7 cents. The protein by-products recovered, can be used as swine and poultry feeds and as human food.

Not Available

1981-09-21T23:59:59.000Z

349

Practical Application of Second Law Costing Methods  

E-Print Network (OSTI)

The key to proper allocation of fuel and feedstock costs to the products from a plant or from any one of its components is the commodity called exergy - the central concept of the Second Law of Thermodynamics, commonly named available energy or availability. The methods for composing exergy cost flow diagrams will be explained. The results will be shown for several plants - electric-power, co-generation, coal-gasification, and others. The application of such results will be shown for cost-accounting, for plant operation economics, for maintenance decisions, and for design decisions - at both the preliminary and detailed design states.

Wepfer, W. J.; Gaggioli, R. A.

1983-01-01T23:59:59.000Z

350

APT cost scaling: Preliminary indications from a Parametric Costing Model (PCM)  

Science Conference Proceedings (OSTI)

A Parametric Costing Model has been created and evaluate as a first step in quantitatively understanding important design options for the Accelerator Production of Tritium (APT) concept. This model couples key economic and technical elements of APT in a two-parameter search of beam energy and beam power that minimizes costs within a range of operating constraints. The costing and engineering depth of the Parametric Costing Model is minimal at the present {open_quotes}entry level{close_quotes}, and is intended only to demonstrate a potential for a more-detailed, cost-based integrating design tool. After describing the present basis of the Parametric Costing Model and giving an example of a single parametric scaling run derived therefrom, the impacts of choices related to resistive versus superconducting accelerator structures and cost of electricity versus plant availability ({open_quotes}load curve{close_quotes}) are reported. Areas of further development and application are suggested.

Krakowski, R.A.

1995-02-03T23:59:59.000Z

351

On the Accuracy of Regulatory Cost Estimates  

NLE Websites -- All DOE Office Websites (Extended Search)

On the Accuracy of Regulatory Cost Estimates On the Accuracy of Regulatory Cost Estimates Speaker(s): Richard Morgenstern Date: December 10, 2013 - 12:00pm - 1:00pm Location: 90-3122 Seminar Host/Point of Contact: Alan Sanstad Margaret Taylor Over the past several decades, the U.S. has seen a gradual reduction in economic regulation and a simultaneous increase in safety, health, environmental, and other social regulations. Especially with the prospect of regulation on greenhouse gases under the Clean Air Act, there is growing concern about the costs, effectiveness, and benefits of federal rules. While prospective or ex ante analyses of the benefits and costs of major federal regulations are now a standard part of government operations, retrospective or ex post analyses, focusing on measurements of actual

352

Unit Cost Natural Gas | OpenEI  

Open Energy Info (EERE)

2 2 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142281532 Varnish cache server Unit Cost Natural Gas Dataset Summary Description Provides annual energy usage for years 1989 through 2010 for UT at Austin; specifically, electricity usage (kWh), natural gas usage (Mcf), associated costs. Also provides water consumption for 2005 through 2010. Source University of Texas (UT) at Austin, Utilities & Energy Management Date Released Unknown Date Updated Unknown Keywords Electricity Consumption Natural Gas Texas Unit Cost Electricity Unit Cost Natural Gas University Water Data application/vnd.ms-excel icon Energy and Water Use Data for UT-Austin (xls, 32.8 KiB) Quality Metrics

353

Unit Cost Electricity | OpenEI  

Open Energy Info (EERE)

8 8 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142281518 Varnish cache server Unit Cost Electricity Dataset Summary Description Provides annual energy usage for years 1989 through 2010 for UT at Austin; specifically, electricity usage (kWh), natural gas usage (Mcf), associated costs. Also provides water consumption for 2005 through 2010. Source University of Texas (UT) at Austin, Utilities & Energy Management Date Released Unknown Date Updated Unknown Keywords Electricity Consumption Natural Gas Texas Unit Cost Electricity Unit Cost Natural Gas University Water Data application/vnd.ms-excel icon Energy and Water Use Data for UT-Austin (xls, 32.8 KiB) Quality Metrics

354

Cost and benefit of energy efficient buildings  

E-Print Network (OSTI)

A common misconception among developers and policy-makers is that "sustainable buildings" may not be financially justified. However, this report strives to show that building green is cost-effective and does make financial ...

Zhang, Wenying, S.B. Massachusetts Institute of Technology

2006-01-01T23:59:59.000Z

355

Cost Recovery | OpenEI Community  

Open Energy Info (EERE)

Cost Recovery Cost Recovery Home Kyoung's picture Submitted by Kyoung(155) Contributor 9 July, 2013 - 20:57 GRR 3rd Quarter - Stakeholder Update Meeting Alaska analysis appropriations Categorical Exclusions Coordinating Permit Office Cost Mechanisms Cost Recovery geothermal Hawaii NEPA permitting quarterly meeting White Papers On June 26th, we held the 3rd Quarter GRR Stakeholder Update at the Grand Sierra Resort in Reno, NV. The meeting was well-attended with over 40 attendees, including in-person and webinar attendance. Thanks to all who attended! Files: application/pdf icon Presentation: 3rd Quarterly Stakeholder Update Meeting application/vnd.openxmlformats-officedocument.presentationml.presentation icon Mock-up: GRR Permitting Wizard Interface Kyoung's picture Submitted by Kyoung(155)

356

Definition: Reduced Congestion Cost | Open Energy Information  

Open Energy Info (EERE)

Cost Cost Jump to: navigation, search Dictionary.png Reduced Congestion Cost Transmission congestion is a phenomenon that occurs in electric power markets. It happens when scheduled market transactions (generation and load) result in power flow over a transmission element that exceeds the available capacity for that element. Since grid operators must ensure that physical overloads do not occur, they will dispatch generation so as to prevent them. The functions that provide this benefit provide lower cost energy, decrease loading on system elements, shift load to off-peak, or allow the grid operator to manage the flow of electricity around constrained interfaces (i.e. dynamic line capability or power flow control).[1] Related Terms power, transmission lines, load, element, electricity

357

Cost Mechanisms | OpenEI Community  

Open Energy Info (EERE)

Cost Mechanisms Cost Mechanisms Home Kyoung's picture Submitted by Kyoung(155) Contributor 9 July, 2013 - 20:57 GRR 3rd Quarter - Stakeholder Update Meeting Alaska analysis appropriations Categorical Exclusions Coordinating Permit Office Cost Mechanisms Cost Recovery geothermal Hawaii NEPA permitting quarterly meeting White Papers On June 26th, we held the 3rd Quarter GRR Stakeholder Update at the Grand Sierra Resort in Reno, NV. The meeting was well-attended with over 40 attendees, including in-person and webinar attendance. Thanks to all who attended! Files: application/pdf icon Presentation: 3rd Quarterly Stakeholder Update Meeting application/vnd.openxmlformats-officedocument.presentationml.presentation icon Mock-up: GRR Permitting Wizard Interface Kyoung's picture Submitted by Kyoung(155)

358

Low Cost, High Performance, 50-year Electrode  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

this ARPA-E project, Primus Power will develop an this ARPA-E project, Primus Power will develop an extremely durable, highly active, conductive, and inexpensive electrode for flow batteries. Flow batteries offer one of the most exciting opportunities for affordable grid storage, however electrodes are costly and are the single largest cost component in a well integrated design. Grid storage can yield numerous benefits in utility and customer- owned applications:  renewable firming  peak load reduction  load shifting  capital deferral  frequency regulation By incorporating volume production practices from the chlorine, filter media, and electroplating industries, Primus Power will effectively reduce electrode costs to exceed GRIDS cost targets while providing the durability essential for widespread grid-scale adoption.

359

NETL: Guide for Preparation of Cost Proposals  

NLE Websites -- All DOE Office Websites (Extended Search)

and Business Opportunities and Business Opportunities Guide for Preparation of Cost Proposals The following guide is to be used in the preparation of the offeror's cost proposal. It provides general instructions as well as the format, exhibits and content that is required to be included in the submission. In addition, the exhibits include examples of both cost elements and indirect rate data that are in typical proposals. Please note that these are provided as a guide only. Do not attempt to conform your proposal to match the exact elements and accounts in the examples. Both the cost elements and indirect rate data in your proposal should be able to be traced to and supported by your accounting system. Any questions should be directed to the contact person noted in the instructions.

360

Durable, Low Cost, Improved Fuel Cell Membranes  

NLE Websites -- All DOE Office Websites (Extended Search)

Durable, Low-cost, Improved Durable, Low-cost, Improved Fuel Cell Membranes US Department of Energy Office of Hydrogen, Fuel Cells and Infrastructure Technologies Kickoff Meeting, Washington DC, February 13, 2007 Michel Fouré Project Objectives z To develop a low cost (vs. perfluorosulfonated ionomers), durable membrane. z To develop a membrane capable at 80°C at low relative humidity (25-50%). z To develop a membrane capable of operating at 120°C for brief periods of time. z To elucidate membrane degradation and failure mechanisms. U:jen/slides/pres.07/FC kickoff Washington DC 2-13-07 2 Technical Barriers Addressed z Membrane Cost z Membrane Durability z Membrane capability to operate at low relative humidity. z Membrane capability to operate at 120ºC for brief period of times.

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Cost Analysis of Hydrogen Storage Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Hydrogen Cost Analysis of Hydrogen Storage Systems Storage Systems TIAX LLC 15 Acorn Park Cambridge, MA 02140-2390 Tel. 617- 498-5000 Fax 617-498-7200 www.TIAXLLC.com Reference:...

362

Dynamic Portfolio Optimization with Transaction Costs: Heuristics ...  

E-Print Network (OSTI)

Aug 10, 2010 ... 1The special case with a quadratic utility and quadratic transaction costs and no portfolio .... The risk-free rate rf is assumed to be known.

363

Cost-Affordable Titanium TABLE OF CONTENTS  

Science Conference Proceedings (OSTI)

... R.M. Siegfried and J. Dunn. Titanium in the Family Automobile: The Cost Challenge [pp. 159-166] F.H. (Sam) Froes, H. Friedrich, J. Kiese and D. Bergoint

364

Regulation, Unemployment, and Cost-Benefit Analysis  

E-Print Network (OSTI)

pdf (A stand-alone analysis of jobs is not included in aWachter, Job Displacement and Mortality: An Analysis Usingnew jobs are rounding errors in cost-benefit analyses that

Posner, Eric; Masur, Jonathan S.

2011-01-01T23:59:59.000Z

365

On Traveling Salesman Games with Asymmetric Costs  

E-Print Network (OSTI)

relaxation is actually a linear production game (Owen 1975). As a result, the dual multipliers of this LP relaxation can be used to construct a cost allocation in the...

366

A multiple secretary problem with switch costs  

E-Print Network (OSTI)

In this thesis, we utilize probabilistic reasoning and simulation methods to determine the optimal selection rule for the secretary problem with switch costs, in which a known number of applicants appear sequentially in a ...

Ding, Jiachuan

2007-01-01T23:59:59.000Z

367

Hydrogen Refueling Station Costs in Shanghai  

E-Print Network (OSTI)

to the natural gas reformer station. Station 4: On-sitereforming of natural gas at the station b. MeOH 100 (case 3)cost of natural gas at the station is much lower (roughly

Weinert, Jonathan X.; Shaojun, Liu; Ogden, Joan M; Jianxin, Ma

2006-01-01T23:59:59.000Z

368

Benchmark the Fuel Cost of Steam Generation  

DOE Green Energy (OSTI)

BestPractices Steam tip sheet regarding ways to assess steam system efficiency. To determine the effective cost of steam, use a combined heat and power simulation model that includes all the significant effects.

Papar, R. [U.S. Department of Energy (US)

2000-12-04T23:59:59.000Z

369

Cost of heliostats in low volume production  

DOE Green Energy (OSTI)

This study indicates that in small volumes, heliostats can be produced at an installed cost of approximately 200 $/M/sup 2/ for a 49.053 m/sup 2/ heliostat. Initial one-time costs of $10 to $15 million would be required, although part of the one-time costs are recoverable. This study provides estimated costs of heliostats that are produced in a plant operating on a continuous basis for a period of four years at a production rate of 2,500 heliostats per year. This scenario was selected somewhat arbitrarily as a scenario that could lead to heliostat market of 5,000 to 10,000 units per year.

Drumheller, K.; Williams, T. A.; Dilbeck, R. A.; Allison, G. S.

1980-01-01T23:59:59.000Z

370

Hydrogen Refueling Station Costs in Shanghai  

E-Print Network (OSTI)

Well-to-wheels analysis of hydrogen based fuel-cell vehicleJP, et al. Distributed Hydrogen Fueling Systems Analysis,Year 2006 UCDITSRR0604 Hydrogen Refueling Station Costs

Weinert, Jonathan X.; Shaojun, Liu; Ogden, Joan M; Jianxin, Ma

2006-01-01T23:59:59.000Z

371

A low cost high flux solar simulator  

E-Print Network (OSTI)

A low cost, high flux, large area solar simulator has been designed, built and characterized for the purpose of studying optical melting and light absorption behavior of molten salts. Seven 1500 W metal halide outdoor ...

Codd, Daniel S.

372

Prediction markets for cost and risk assessment  

E-Print Network (OSTI)

Several temporal and political factors can sometimes limit the effectiveness of traditional methods of project tracking and cost estimation. A large organization is susceptible to internal and external risks that are ...

Aggarwal, Taroon

2011-01-01T23:59:59.000Z

373

Forecasting Electric Vehicle Costs with Experience Curves  

E-Print Network (OSTI)

April, 5. R 2~1. Dino. "Forecasting the Price Evolution of 1ElectromcProducts," Ioumal of Forecasting, oL4, No I, 1985.costs and a set of forecasting tools that can be refined as

Lipman, Timonthy E.; Sperling, Daniel

2001-01-01T23:59:59.000Z

374

Automatic monitoring helps reduce lighting costs  

SciTech Connect

A Benton, Arkansas utility is using a dimmable ballast system to curb high-intensity-discharge (HID) lighting costs. The system also incorpoates a monitoring control system. This control automatically maintains minimum illumination levels.

1978-11-01T23:59:59.000Z

375

SYSPLAN. Load Leveling Battery System Costs  

SciTech Connect

SYSPLAN evaluates capital investment in customer side of the meter load leveling battery systems. Such systems reduce the customer`s monthly electrical demand charge by reducing the maximum power load supplied by the utility during the customer`s peak demand. System equipment consists of a large array of batteries, a current converter, and balance of plant equipment and facilities required to support the battery and converter system. The system is installed on the customer`s side of the meter and controlled and operated by the customer. Its economic feasibility depends largely on the customer`s load profile. Load shape requirements, utility rate structures, and battery equipment cost and performance data serve as bases for determining whether a load leveling battery system is economically feasible for a particular installation. Life-cycle costs for system hardware include all costs associated with the purchase, installation, and operation of battery, converter, and balance of plant facilities and equipment. The SYSPLAN spreadsheet software is specifically designed to evaluate these costs and the reduced demand charge benefits; it completes a 20 year period life cycle cost analysis based on the battery system description and cost data. A built-in sensitivity analysis routine is also included for key battery cost parameters. The life cycle cost analysis spreadsheet is augmented by a system sizing routine to help users identify load leveling system size requirements for their facilities. The optional XSIZE system sizing spreadsheet which is included can be used to identify a range of battery system sizes that might be economically attractive. XSIZE output consisting of system operating requirements can then be passed by the temporary file SIZE to the main SYSPLAN spreadsheet.

Hostick, C.J. [Pacific Northwest Lab., Richland, WA (United States)

1988-03-22T23:59:59.000Z

376

COST FUNCTION STUDIES FOR POWER REACTORS  

SciTech Connect

A function to evaluate the cost of electricity produced by a nuclear power reactor was developed. The basic equation, revenue = capital charges + profit + operating expenses, was expanded in terms of various cost parameters to enable analysis of multiregion nuclear reactors with uranium and/or plutonium for fuel. A corresponding IBM 704 computer program, which will compute either the price of electricity or the value of plutonium, is presented in detail. (auth)

Heestand, J.; Wos, L.T.

1961-11-01T23:59:59.000Z

377

Reduce generating costs and eliminate brownouts  

Science Conference Proceedings (OSTI)

Improving the manoeuverability of a coal-fired plant to allow it to participate in primary frequency support will reduce generation cost and minimize brownouts. The challenge is to do so without compromising efficiency or emissions. This article describes an approach - activation of stored energy - that is cost-effective and applicable to both greenfield and brownfield installations. It requires a new control philosophy, plus the correct application of new level and flow measurement 'best practices'. 4 refs., 1 tab.

Nogaja, R.; Menezes, M. [Emerson Process Management (United States)

2007-06-15T23:59:59.000Z

378

Cooling Energy and Cost Savings with Daylighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Cooling Energy and Cost Savings with Daylighting Cooling Energy and Cost Savings with Daylighting Title Cooling Energy and Cost Savings with Daylighting Publication Type Conference Paper LBNL Report Number LBL-19734 Year of Publication 1985 Authors Arasteh, Dariush K., Russell Johnson, Stephen E. Selkowitz, and Deborah J. Connell Conference Name 2nd Annual Symposium on Improving Building Energy Efficiency in Hot and Humid Climates Date Published 09/1985 Conference Location Texas A&M University Call Number LBL-19734 Abstract Fenestration performance in nonresidentialsbuildings in hot climates is often a large coolingsload liability. Proper fenestration design andsthe use of daylight-responsive dimming controls onselectric lights can, in addition to drasticallysreducing lighting energy, lower cooling loads,speak electrical demand, operating costs, chillerssizes, and first costs. Using the building energyssimulation programs DOE-2.1B and DOE-2.1C , wesfirst discuss lighting energy savings from daylighting.sThe effects of fenestration parametersson cooling loads, total energy use, peak demand,schiller sizes, and initial and operating costs aresalso discussed. The impact of daylighting, asscompared to electric lighting, on cooling requirementssis discussed as a function of glazingscharacteristics, location, and shading systems.

379

Portable top drive cuts horizontal drilling costs  

SciTech Connect

Economic analysis of a seven-well, long-reach horizontal drilling program into an unconsolidated, heavy-oil-bearing reservoir in Winter field near the Alberta/Saskatchewan border in Canada reveals that -- in the right application -- renting a portable top drive drilling system can reduce total drilling costs. Use of the portable top drive combined with other cost-saving measures enabled Saskoil, one of Canada`s larger independents, to drill more cheaply, on a cost-per-meter basis, in 1993 than in 1992. This was despite significant rental rates for drilling rigs and directional drilling services caused by increased demand in Western Canada. Total cost savings of 10% on wells that would otherwise cost in the (C) $500,000 range are believed realistic. Based on this year`s performance, Saskoil recommends top drive for the company`s future horizontal wells in this area. This article describes the operator`s horizontal well program, advantages of top drive in that program and how it was installed and applied. Estimated time savings for six wells, plus other ways top drive can cut costs and improve operations are discussed.

Jackson, B. [Saskoil, Regina, Saskatchewan (Canada); Yager, D. [Tesco Drilling Tech., Calgary, Alberta (Canada)

1993-11-01T23:59:59.000Z

380

Environmental control costs for oil shale processes  

SciTech Connect

The studies reported herein are intended to provide more certainty regarding estimates of the costs of controlling environmental residuals from oil shale technologies being readied for commercial application. The need for this study was evident from earlier work conducted by the Office of Environment for the Department of Energy Oil Shale Commercialization Planning, Environmental Readiness Assessment in mid-1978. At that time there was little reliable information on the costs for controlling residuals and for safe handling of wastes from oil shale processes. The uncertainties in estimating costs of complying with yet-to-be-defined environmental standards and regulations for oil shale facilities are a critical element that will affect the decision on proceeding with shale oil production. Until the regulatory requirements are fully clarified and processes and controls are investigated and tested in units of larger size, it will not be possible to provide definitive answers to the cost question. Thus, the objective of this work was to establish ranges of possible control costs per barrel of shale oil produced, reflecting various regulatory, technical, and financing assumptions. Two separate reports make up the bulk of this document. One report, prepared by the Denver Research Institute, is a relatively rigorous engineering treatment of the subject, based on regulatory assumptions and technical judgements as to best available control technologies and practices. The other report examines the incremental cost effect of more conservative technical and financing alternatives. An overview section is included that synthesizes the products of the separate studies and addresses two variations to the assumptions.

1979-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Heliostat manufacturing cost analysis. Volume 1  

DOE Green Energy (OSTI)

This study has two primary objectives. The first is to provide a detailed cost evaluation of the second generation of DOE heliostats, from which repowering heliostat designs are likely to be derived. A second objective is to provide an analytical foundation for the evaluation of futue heliostat designs. The approach taken for this study was to produce a cost estimate for the production of the McDonnell Douglas prototype design by generating estimates of the materials, labor, overhead, and facilities costs for two different production scenarios, 25,000 heliostats per year and 250,000 heliostats per year. The primary conclusion of this study is that the second generation of heliostat designs should cost approximately $100/m/sup 2/ at volumes of 25,000 units/year. This price falls to approximately $80/m/sup 2/ at volumes of 250,000 units/year. A second conclusion is that cost reduction begins at relatively low production volumes and that many production benefits can be obtained at production rates of 5,000 to 15,000 units/year. A third conclusion is that the SAMICS model and the SAMIS III program can be useful tools in heliostat manufacturing, costing, and economic studies.

Drumheller, K; Schulte, S C; Dilbeck, R A; Long, L W

1979-10-01T23:59:59.000Z

382

Evaluation of I-15 Devore (08-0A4224) Long-Life Pavement Rehabilitation Costs  

E-Print Network (OSTI)

the expenditures for these projects, costs were divided intoemulsion. Table 1 Project Cost Breakdown Direct CostsTotal Cost)/(Lane Miles) Project Cost Breakdown Original Bid

Fermo, Mary G; Santero, Nicholas J; Nokes, William; Harvey, John T

2005-01-01T23:59:59.000Z

383

A Review of Electric Vehicle Cost Studies: Assumptions, Methodologies, and Results  

E-Print Network (OSTI)

assumptions Battery costs and capacities: Lead acid batteryElectricity cost Battery cost and capacity: Lead acidElectricity cost Battery cost and capacity: N i C d

Lipman, Timothy

1999-01-01T23:59:59.000Z

384

Cost update technology, safety, and costs of decommissioning a reference uranium hexafluoride conversion plant  

Science Conference Proceedings (OSTI)

The purpose of this study is to update the cost estimates developed in a previous report, NUREG/CR-1757 (Elder 1980) for decommissioning a reference uranium hexafluoride conversion plant from the original mid-1981 dollars to values representative of January 1993. The cost updates were performed by using escalation factors derived from cost index trends over the past 11.5 years. Contemporary price quotes wee used for costs that have increased drastically or for which is is difficult to find a cost trend. No changes were made in the decommissioning procedures or cost element requirements assumed in NUREG/CR-1757. This report includes only information that was changed from NUREG/CR-1757. Thus, for those interested in detailed descriptions and associated information for the reference uranium hexafluoride conversion plant, a copy of NUREG/CR-1757 will be needed.

Miles, T.L.; Liu, Y.

1995-08-01T23:59:59.000Z

385

REQUEST FOR INDIRECT COST WAIVER I. Project Director  

E-Print Network (OSTI)

REQUEST FOR INDIRECT COST WAIVER I. Project Director: Department: Project Title: Project Sponsor without fully recovering the institutional indirect costs which will be incurred in conducting the project COSTS 1. FULL: OF I. A. C. 2. PARTIAL: OF H. B. K. TOTAL PROJECT COSTS L. INDIRECT COSTS TO BE WAIVED, J

Krovi, Venkat

386

Cost Transfers on Sponsored Agreements Effective July 1, 2007  

E-Print Network (OSTI)

be identified specifically with a particular sponsored project; · costs that can be directly assigned to a project with a high degree of accuracy. Facilities and Administrative (F&A) or indirect costs: · costs. Typically, cost transfers are appropriate when they are allowable direct costs of the sponsored project

387

Closed-Form Upper Bounds in Static Cost Analysis  

Science Conference Proceedings (OSTI)

The classical approach to automatic cost analysis consists of two phases. Given a program and some measure of cost, the analysis first produces cost relations (CRs), i.e., recursive equations which capture the cost of the program in ... Keywords: Abstract interpretation, Automatic complexity analysis, Closed-form upper bounds, Cost analysis, Programming languages, Resource analysis, Static analysis

Elvira Albert; Puri Arenas; Samir Genaim; Germn Puebla

2011-02-01T23:59:59.000Z

388

Past and Future Cost of Wind Energy: Preprint  

DOE Green Energy (OSTI)

The future of wind power will depend on the ability of the industry to continue to achieve cost reductions. To better understand the potential for cost reductions, this report provides a review of historical costs, evaluates near-term market trends, and summarizes the range of projected costs. It also notes potential sources of future cost reductions.

Lantz, E.; Hand, M.; Wiser, R.

2012-08-01T23:59:59.000Z

389

The Social-Cost Calculator (SCC): Documentation of Methods and Data, and Case Study of Sacramento  

E-Print Network (OSTI)

N. I. Tishchcishyna, Costs of Oil Dependence: A 2000 Update,costs Climate change costs Oil use costs Fuel costs sections on climate-change costs, oil-use external costs,

Delucchi, Mark

2005-01-01T23:59:59.000Z

390

THE SOCIAL-COST CALCULATOR (SCC): DOCUMENTATION OF METHODS AND DATA, AND CASE STUDY OF SACRAMENTO  

E-Print Network (OSTI)

N. I. Tishchcishyna, Costs of Oil Dependence: A 2000 Update,costs Climate change costs Oil use costs Fuel costs sections on climate-change costs, oil-use external costs,

Delucchi, Mark

2005-01-01T23:59:59.000Z

391

Using Natural Gas Transmission Pipeline Costs to Estimate Hydrogen Pipeline Costs  

E-Print Network (OSTI)

cost dependent on pipeline length and diameter against thedescribe with only the pipeline length and diameter. Labordescribed by the pipeline diameter and length alone. In some

Parker, Nathan

2004-01-01T23:59:59.000Z

392

Waste management facilities cost information: System cost model product description. Revision 2  

SciTech Connect

In May of 1994, Lockheed Idaho Technologies Company (LITCO) in Idaho Falls, Idaho and subcontractors developed the System Cost Model (SCM) application. The SCM estimates life-cycle costs of the entire US Department of Energy (DOE) complex for designing; constructing; operating; and decommissioning treatment, storage, and disposal (TSD) facilities for mixed low-level, low-level, transuranic, and mixed transuranic waste. The SCM uses parametric cost functions to estimate life-cycle costs for various treatment, storage, and disposal modules which reflect planned and existing facilities at DOE installations. In addition, SCM can model new facilities based on capacity needs over the program life cycle. The SCM also provides transportation costs for DOE wastes. Transportation costs are provided for truck and rail and include transport of contact-handled, remote-handled, and alpha (transuranic) wastes. The user can provide input data (default data is included in the SCM) including the volume and nature of waste to be managed, the time period over which the waste is to be managed, and the configuration of the waste management complex (i.e., where each installation`s generated waste will be treated, stored, and disposed). Then the SCM uses parametric cost equations to estimate the costs of pre-operations (designing), construction costs, operation management, and decommissioning these waste management facilities.

Lundeen, A.S.; Hsu, K.M.; Shropshire, D.E.

1996-02-01T23:59:59.000Z

393

Evidence of cost growth under cost-plus and fixed-price contracting  

SciTech Connect

As defined by the US Department of Energy (DOE), privatization refers to a shifting of responsibilities for the completion of projects from a cost-plus Management and Operations (M and O) contract, to incentive-based contracts with the private sector. DOE`s new vision is to arrange cleanup work around incentives-based contracts, which are won via competitive bidding. Competition in awarding cleanup contracts can make use of market incentives to lower project costs and reduce slippage time. Fixed-price contracts encourage contractors to minimize schedule delays and cost overruns once the scope of a project has been negotiated. Conversely, cost-plus contracting offers weak incentives for contractors to select cost-minimizing production and management approaches. Because privatization explicitly allocates more risk to the contractor, it forces the government to better define its goals and methods. This study summarizes actual cost experiences with government contracts performed under cost-plus and fixed-price incentive structures at all levels of government. The first section provides some background on the problem of making contractor activity more cost-efficient. Following this are sections on the measurement of performance and the costs of projects, limitations on measurement, and findings of similar studies. The study concludes with appendices discussing the details of the performance measurement methodology and the project data sets used in the study.

Scott, M.J.; Paananaen, O.H.; Redgate, T.E.; Ulibarri, C.A.; Jaksch, J.A.

1998-09-01T23:59:59.000Z

394

On demand responsiveness in additive cost sharing  

E-Print Network (OSTI)

Abstract. We propose two new axioms of demand responsiveness for additive cost sharing with variable demands. Group Monotonicity requires that if a group of agents increase their demands, not all of them pay less. Solidarity says that if agent i demands more, j should not pay more if k pays less. Both axioms are compatible in the partial responsibility theory postulating Strong Ranking, i.e., the ranking of cost shares should never contradict that of demands. The combination of Strong Ranking, Solidarity and Monotonicity characterizes the quasi-proportional methods, under which cost shares are proportional to rescaled demands. The alternative full responsibility theory is based on Separability, ruling out cross-subsidization when costs are additively separable. Neither the Aumann-Shapley nor the Shapley-Shubik method is group monotonic. On the other hand, convex combinations of nearby xed-path methods are group-monotonic: the subsidy-free serial method is the main example. No separable method meets Solidarity, yet restricting the axiom to submodular (or supermodular) cost functions leads to a characterization of the xed-ow methods, containing the Shapley-Shubik and serial methods. JEL Classication numbers: C 71, D 63.

Herv Moulin; Yves Sprumont

2005-01-01T23:59:59.000Z

395

Updating Texas Energy Cost Containment Audit Reports  

E-Print Network (OSTI)

In 1984 and 1986, 35.3 million square feet of state owned buildings were audited to identify cost saving retrofit projects. Originally intended for direct legislative funding or bond sales, funding became available in 1989 through oil overcharge moneys in a program known as LoanSTAR. Due to the time between the audits and availability of funds, update of the reports for current energy and equipment cost, and for accomplishment of projects was necessary. Audits in 1984 and 1986 identified total savings of $21.3 million per year and investment costs of $42.3 million per year. The 1989 update revealed retrofit projects remaining worth $10.9 million per year in savings and costing $30.5 million. The reduction in savings and costs is primarily due to changes in prices and accomplishment of projects. The methodology for updating prices and surveying facility energy contacts to determine accomplishment will be discussed. Both the accomplishment of maintenance and operation (M&O) type projects and capital-intensive retrofit/measures will be discussed. For example, the surveys revealed that 69% of 291 M&O's have already been accomplished, along with 24% of the 750 retrofit/measures.

Burke, T. E.; Heffington, W. M.

1989-01-01T23:59:59.000Z

396

A framework and review of customer outage costs: Integration and analysis of electric utility outage cost surveys  

E-Print Network (OSTI)

Std Dev Cost Per Annual Cost Per kWh Usage Peak kW AverageStd Dev Cost Per Annual Cost Per kWh Usage Peak kW Average3-2. Logged Outage Cost per Annual kWh Figure 3-3. Logged

Lawton, Leora; Sullivan, Michael; Van Liere, Kent; Katz, Aaron; Eto, Joseph

2003-01-01T23:59:59.000Z

397

Cost Sharing Granting agencies may require the University to bear some of the costs of a sponsored project,  

E-Print Network (OSTI)

and cost sharing funds should be spent at about the same rate throughout the project: for example, when 10 of project costs will normally be transferred from the grant FOP to the cost sharing FOP. Granting agencies charged to the sponsored FOP or to a cost sharing FOP for that project. Methods of Cost Sharing 1. Cash

Tam, Tin-Yau

398

Process-Based Cost Modeling to Support Target Value Design  

E-Print Network (OSTI)

elemental analysis (cost-per-square-foot) are referred to asTraditional models (cost per square foot, elementalunit costs per an area unit (i.e. , $/Square Foot) or per a

Nguyen, Hung Viet

2010-01-01T23:59:59.000Z

399

The External Damage Cost of Direct Noise From Motor Vehicles  

E-Print Network (OSTI)

Effects and Social Costs of Road Transport, Transportationreview of the social costs of transportation in the U. S.social cost MV = motor vehicle NIPA = National Income Product Accounts NOx = nitrogen oxides NPTS = Nationwide Personal Transportation

Delucchi, Mark A.; Hsu, Shi-Ling

1996-01-01T23:59:59.000Z

400

Improved supplier selection and cost management for globalized automotive production  

E-Print Network (OSTI)

For many manufacturing and automotive companies, traditional sourcing decisions rely on total landed cost models to determine the cheapest supplier. Total landed cost models calculate the cost to purchase a part plus all ...

Franken, Joseph P., II (Joseph Philip)

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Chapter 31 - Contract Cost Principles and Procedures | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 - Contract Cost Principles and Procedures Chapter 31 - Contract Cost Principles and Procedures 31.1CostReasonableness0.pdf 31.2AllowableFoodandBeverageCostsatDOEandCo...

402

Cost-benefit analysis conducted for nutrition education in California  

E-Print Network (OSTI)

of the California Expanded Food are cost-effective and thatE, et al. 1999. Ap- plying cost-bene?t analysis to nutritionRH, Lambur M, Lewis E. 2002. Cost- bene?t analysis indicates

Block Joy, Amy; Goldman, George; Pradhan, Vijay

2006-01-01T23:59:59.000Z

403

Measuring Cost Variability in Provision of Transit Service  

E-Print Network (OSTI)

W. , and S. R. Mundle. Peak-Base Cost Allocation Models. In2933. Reilly, J. M. Transit Costs During Peak and Off-PeakHow to Allocate Bus Route Costs. Transit, Vol. 5, No. 2,

Taylor, Brian D.; Garrett, Mark; Iseki, Hiroyuki

2010-01-01T23:59:59.000Z

404

Underestimating Costs in Public Works Projects: Error or Lie?  

E-Print Network (OSTI)

J. M. (1964). Errors in project cost estimates. Indian Eco-leave out important project costs and risks in order to makeclearly, comparing actual project costs with esti- mated

Flyvbjerg, Bent; Holm, Mette Skamris; Buhl, Sren

2006-01-01T23:59:59.000Z

405

Alternative Windpower Ownership Structures: Financing Terms and Project Costs  

E-Print Network (OSTI)

LBNL-38921 UC-1321 Alternative Windpower Ownership Structures: Financing Terms and Project Costs Terms and Variables: Description and Empirical Estimates . . . . . . . . . 8 Windpower Project, Cost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Windpower Project Costs Under Various Ownership Structures . . . . . . . . . . . . 19 Analysis

406

A Nonlinear Generalized Additive Error Model of Production and Cost  

E-Print Network (OSTI)

Additive Error Model of Production and Cost by Quirino ParisError Model of Production and Cost Quirino Paris* UniversityAdditive Error Model of Production and Cost I. Introduction

Paris, Quirino; Caputo, Michael R.

2004-01-01T23:59:59.000Z

407

Efficient Estimates of a Model of Production and Cost  

E-Print Network (OSTI)

Estimates of a Model of Production and Cost by Quirino ParisEstimates of a Model of Production and Cost Quirino Paris*Estimates of a Model of Production and Cost I. Introduction

Paris, Quirino; Caputo, Michael R.

2004-01-01T23:59:59.000Z

408

The Social Costs of an MTBE Ban in California  

E-Print Network (OSTI)

Montgomery. Social Cost of Imported Oil and U.S. ImportCredit Change in Re?ning Cost, Oil Import Bill, and ConsumerCredit Change in Re?ning Cost, Oil Import Bill, and Consumer

Rausser, Gordon C.; Adams, Gregory D.; Montgomery, W. David; Smith, Anne E.

2005-01-01T23:59:59.000Z

409

External Costs of Transport in the U.S.  

E-Print Network (OSTI)

1986). Estimating the Cost of Oil Spills: Lessons from theEnergy security/oil-importing costs Brief Review of Methodsnot reflected in the price of oil: the cost of the Strategic

Delucchi, Mark A.; McCubbin, Donald R.

2010-01-01T23:59:59.000Z

410

Collusion Through Insurance: Sharing the Costs of Oil Spill Cleanups  

E-Print Network (OSTI)

Insurance: Sharing the Costs of Oil Spill Cleanups." EddieInsurance: Sharing the Costs of Oil Spill Cleanups EddieINSURANCE: SHARING THE COSTS OF OIL SPILL CLEANUPS Eddie

Dekel, Eddie; Scothmer, Suzanne

1989-01-01T23:59:59.000Z

411

Societal lifetime cost of hydrogen fuel cell vehicles  

E-Print Network (OSTI)

3.1 Fuel Cell System Cost Estimate We define the fuel cellto note that these cost estimates are based on a largeother studies on fuel cell cost estimates Baseline gasoline

Sun, Yongling; Ogden, J; Delucchi, Mark

2010-01-01T23:59:59.000Z

412

COST AND SCHEDULE FOR DRILLING AND MINING UNDERGROUND TEST FACILITIES  

E-Print Network (OSTI)

TYPE OF ESTIMATE Cost Estimate for NUMBER CHKD KJW/RL SNTTABLE 4 CLIENT PROJECT Cost Estimate for U/G Test FacilityTABLE 4 PROJECT No. Cost Estimate for DESCRIPTION Test QUANT

Lamb, D.W.

2013-01-01T23:59:59.000Z

413

Measuring Cost Variability in Provision of Transit Service  

E-Print Network (OSTI)

pro- vide separate cost estimates for two periodsthe peakvehicle-hour unit-cost estimates for the peak and base= vehicle-hour unit-cost estimate for peak, U BVH = vehicle-

Taylor, Brian D.; Garrett, Mark; Iseki, Hiroyuki

2010-01-01T23:59:59.000Z

414

WREF 2012: THE PAST AND FUTURE COST OF WIND ENERGY  

E-Print Network (OSTI)

E. (2011). The Cost of Wind Energy. Spanish Wind EnergyTERM TRENDS IN THE COST OF WIND ENERGY by as much as 270%LONG-TERM TRENDS IN THE COST OF WIND ENERGY In the future,

Wiser, Ryan

2013-01-01T23:59:59.000Z

415

Societal lifetime cost of hydrogen fuel cell vehicles  

E-Print Network (OSTI)

James, A cost comparison of fuel-cell and battery electricHowever, battery electric vehicles have lower fuel cost, usebattery-electric vehicles in terms of weight, volume, GHGs and cost,

Sun, Yongling; Ogden, J; Delucchi, Mark

2010-01-01T23:59:59.000Z

416

Solid-State Lighting: Simple Modular LED Cost Model  

NLE Websites -- All DOE Office Websites (Extended Search)

Simple Modular LED Cost Model to someone by E-mail Share Solid-State Lighting: Simple Modular LED Cost Model on Facebook Tweet about Solid-State Lighting: Simple Modular LED Cost...

417

Including costs of supply chain risk in strategic sourcing decisions  

E-Print Network (OSTI)

Cost evaluations do not always include the costs associated with risks when organizations make strategic sourcing decisions. This research was conducted to establish and quantify the impact of risks and risk-related costs ...

Jain, Avani

2009-01-01T23:59:59.000Z

418

A multi-regression analysis of airline indirect operating costs  

E-Print Network (OSTI)

A multiple regression analysis of domestic and local airline indirect costs was carried out to formulate cost estimating equations for airline indirect costs. Data from CAB and FAA sources covering the years 1962-66 was ...

Taneja, Nawal K.

1968-01-01T23:59:59.000Z

419

The costs of environmental regulation in a concentrated industry  

E-Print Network (OSTI)

The typical cost analysis of an environmental regulation consists of an engineering estimate of the compliance costs. In industries where fixed costs are an important determinant of market structure this static analysis ...

Ryan, Stephen

2005-01-01T23:59:59.000Z

420

RSF Workshop Session III: Cost Considerations  

NLE Websites -- All DOE Office Websites (Extended Search)

III: Cost Considerations III: Cost Considerations Moderator: Dana Christensen Panelists: Phil Macey Paul Torcellini Rich von Luhrte NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. The Road to Net Zero Dana Christensen Deputy Laboratory Director Science & Technology RSF Workshop July 27-28, 2011 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. Managing Costs Paul Torcellini, PhD, PE Group Manager, Advanced Commercial Buildings Research Group Innovation for Our Energy Future 4 I II III IV Value Added 5 * Owner made tough decisions up-front * Set budget * Sought maximum value for that budget

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Low-Cost, Lightweight Solar Concentrators  

NLE Websites -- All DOE Office Websites (Extended Search)

Concentrators Concentrators California Institute of Technology/Jet Propulsion Laboratory Award Number:0595-1612 | January 15, 2013 | Ganapathi Thin Film mirror is ~40-50% cheaper and 60% lighter than SOA * Project leverages extensive space experience by JPL and L'Garde to develop a low-cost parabolic dish capable of providing 4 kW thermal. Key features: * Metallized reflective thin film material with high reflectivity (>93%) with polyurethane foam backing * Single mold polyurethane backing fabrication enables low cost high production manufacturing * Ease of panel installation and removal enables repairs and results in a low total life cycle cost * Deployment of multiple dishes enhances system level optimizations by simulating larger fields which addresses issues like shared resources

422

Energy Cost Control: How the Money Works  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Russell Russell Energy PathFINDER www.energypathfinder.com crussell@energypathfinder.com Energy Cost Control: How the Money Works (Copies of these slides to be provided by DOE-ITP) (c)2009 Energy Pathfinder Mangement Consulting, LLC www.energypathfinder.com 2 Samuel Goldwyn (1879-1974) "Spare no expense to save money on this one." (c)2009 Energy Pathfinder Mangement Consulting, LLC www.energypathfinder.com 3 OUTLINE A "money" perspective on energy Projects, payback Make-or-buy Annualized cost analysis Cost of doing nothing Break-even analysis Budget for additional analysis (c)2009 Energy Pathfinder Mangement Consulting, LLC www.energypathfinder.com 4 A print-on-demand publication www.lulu.com/content/2152882 About Christopher Russell

423

Maglev guideway cost and construction schedule assessment  

SciTech Connect

A summary of construction cost and scheduling information is presented for four maglev guideway designs on an example route from Baltimore, MD to Newark, NJ. This work results from the National Maglev Initiative (NMI), a government-industry effort from 1989 to 1994. The system design concepts used as a basis for developing cost and construction scheduling information, were submitted by four industry consortia solely for this analysis, and represent their own unpublished designs. The detailed cost and construction schedule analyses cover the main guideway only. A summary estimate was made for stations, power distribution systems, maintenance facilities, and other types of infrastructure. The results of the analyses indicate a number of design aspects which must receive further consideration by future designers. These aspects will affect the practical and economic construction and long-term maintenance of a high-speed maglev guideway.

Plotkin, D.; Kim, S. [Army Construction Engineering Research Lab., Champaign, IL (United States)

1997-05-01T23:59:59.000Z

424

Waste Management Facilities Cost Information Report  

Science Conference Proceedings (OSTI)

The Waste Management Facility Cost Information (WMFCI) Report, commissioned by the US Department of Energy (DOE), develops planning life-cycle cost (PLCC) estimates for treatment, storage, and disposal facilities. This report contains PLCC estimates versus capacity for 26 different facility cost modules. A procedure to guide DOE and its contractor personnel in the use of estimating data is also provided. Estimates in the report apply to five distinctive waste streams: low-level waste, low-level mixed waste, alpha contaminated low-level waste, alpha contaminated low-level mixed waste, and transuranic waste. The report addresses five different treatment types: incineration, metal/melting and recovery, shredder/compaction, solidification, and vitrification. Data in this report allows the user to develop PLCC estimates for various waste management options.

Feizollahi, F.; Shropshire, D.

1992-10-01T23:59:59.000Z

425

2011 Cost of Wind Energy Review  

NLE Websites -- All DOE Office Websites (Extended Search)

Cost of Wind Energy Cost of Wind Energy Review S. Tegen, E. Lantz, M. Hand, B. Maples, A. Smith, and P. Schwabe National Renewable Energy Laboratory Technical Report NREL/TP-5000-56266 March 2013 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 15013 Denver West Parkway Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract No. DE-AC36-08GO28308 2011 Cost of Wind Energy Review S. Tegen, E. Lantz, M. Hand, B. Maples, A. Smith, and P. Schwabe National Renewable Energy Laboratory Prepared under Task No. WE11.1201 Technical Report NREL/TP-5000-56266 March 2013 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government.

426

COST OF MERCURY REMOVAL IN IGCC PLANTS  

NLE Websites -- All DOE Office Websites (Extended Search)

Cost of Mercury Removal Cost of Mercury Removal in an IGCC Plant Final Report September 2002 Prepared for: The United States Department of Energy National Energy Technology Laboratory By: Parsons Infrastructure and Technology Group Inc. Reading, Pennsylvania Pittsburgh, Pennsylvania DOE Product Manager: Gary J. Stiegel DOE Task Manager: James R. Longanbach Principal Investigators: Michael G. Klett Russell C. Maxwell Michael D. Rutkowski PARSONS The Cost of Mercury Removal in an IGCC Plant Final Report i September 2002 TABLE OF CONTENTS Section Title Page 1 Summary 1 2 Introduction 3 3 Background 4 3.1 Regulatory Initiatives 4 3.2 Mercury Removal for Conventional Coal-Fired Plants 4 3.3 Mercury Removal Experience in Gasification 5 3.4 Variability of Mercury Content in Coal 6 4 Design Considerations 7 4.1 Carbon Bed Location

427

Low-Cost, Lightweight Solar Concentrators  

NLE Websites -- All DOE Office Websites (Extended Search)

Concentrators Concentrators California Institute of Technology/Jet Propulsion Laboratory Award Number:0595-1612 | April 18, 2013 | Ganapathi * Mirror module development has been approached with the goal of being applicable to all types of CSP systems * Several heliostat design options being considered to address driving requirements: * Facets that are compliant to winds > 35 mph * Deep structures for optimizing structural efficiency * Pointing accuracy achieved with mechanism design * Simple precision components * Easy on-site assembly with pre-fab components * Structural foam properties and strengthening trades being conducted to reduce overall costs with FEM models Goal: Typical costs for a concentrator (heliostat or parabolic dish) can range between 40-50% of the total costs. To meet SunShot

428

Wind Turbine Design Cost and Scaling Model  

NLE Websites -- All DOE Office Websites (Extended Search)

Wind Turbine Design Cost Wind Turbine Design Cost and Scaling Model L. Fingersh, M. Hand, and A. Laxson Technical Report NREL/TP-500-40566 December 2006 NREL is operated by Midwest Research Institute ● Battelle Contract No. DE-AC36-99-GO10337 Wind Turbine Design Cost and Scaling Model L. Fingersh, M. Hand, and A. Laxson Prepared under Task No. WER6.0703 Technical Report NREL/TP-500-40566 December 2006 National Renewable Energy Laboratory 1617 Cole Boulevard, Golden, Colorado 80401-3393 303-275-3000 * www.nrel.gov Operated for the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy by Midwest Research Institute * Battelle Contract No. DE-AC36-99-GO10337 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government.

429

2010 Cost of Wind Energy Review  

NLE Websites -- All DOE Office Websites (Extended Search)

Cost of Wind Energy Cost of Wind Energy Review S. Tegen, M. Hand, B. Maples, E. Lantz P. Schwabe, and A. Smith Technical Report NREL/TP-5000-52920 April 2012 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 15013 Denver West Parkway Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract No. DE-AC36-08GO28308 2010 Cost of Wind Energy Review S. Tegen, M. Hand, B. Maples, E. Lantz P. Schwabe, and A. Smith Prepared under Task No. WE11.1201 Technical Report NREL/TP-5000-52920 April 2012 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government.

430

Lower Cost, Higher Performance Carbon Fiber  

NLE Websites -- All DOE Office Websites (Extended Search)

David (Dave) Warren David (Dave) Warren Field Technical Manager Transportation Materials Research Oak Ridge National Laboratory P.O. Box 2009, M/S 8050 Oak Ridge, Tennessee 37831-8050 Phone: 865-574-9693 Fax: 865-574-0740 Email: WarrenCD@ORNL.GOV Lower Cost, Higher Performance Carbon Fiber 14 February 2011 2 Managed by UT-Battelle for the U.S. Department of Energy Presentation_name Questions for Today Materials How can the cost of carbon fiber suitable for higher performance applications (H 2 Storage) be developed? H 2 Storage requirements implies Aerospace grade fibers. Can we build off of work previously done for more modest structural applications? To accurately answer: We need to know the minimum performance and maximum cost requirements of the fiber not simply the properties of current fiber.

431

Computerized Energy and Treatment Cost Calculations  

E-Print Network (OSTI)

A computer program has been developed that quickly calculates blowdown heat loss as a function of makeup water, boiler water chemistry, and blowdown recovery equipment. By inputting water analysis, basic system parameters, and type of fuel, the cost of heat loss in the blowdown can be quickly and accurately determined. Present operating systems can quickly be evaluated as to potential cost savings on the addition of a blowdown flash tank and/or a recovery heat exchanger. Proposed systems can be engineered from the start with an eye to decreasing energy loss and saving money. In addition, the proper internal treatment is recommended along with appropriate products. Cost of energy lost in the blowdown is calculated based on different levels of blowdown heat recovery. Accurate calculations are readily available to make more intelligent decisions on the purchase of recovery equipment, rather than depending on very tedious, potentially inaccurate determinations by long hand.

Trace, W. L.

1981-01-01T23:59:59.000Z

432

Electrical Cost Reduction Via Steam Turbine Cogeneration  

E-Print Network (OSTI)

Steam turbine cogeneration is a well established technology which is widely used in industry. However, smaller previously unfeasible applications can now be cost effective due to the packaged system approach which has become available in recent years. The availability of this equipment in a packaged system form makes it feasible to replace pressure reducing valves with turbine generator sets in applications with flows as low as 4000 pounds of steam per hour. These systems produce electricity for $0.01 to $.02 per kWh (based on current costs of gas and oil); system cost is between $200 and $800 per kW of capacity. Simple system paybacks between one and three years are common.

Ewing, T. S.; Di Tullio, L. B.

1991-06-01T23:59:59.000Z

433

Cost analysis methodology: Photovoltaic Manufacturing Technology Project  

DOE Green Energy (OSTI)

This report describes work done under Phase 1 of the Photovoltaic Manufacturing Technology (PVMaT) Project. PVMaT is a five-year project to support the translation of research and development in PV technology into the marketplace. PVMaT, conceived as a DOE/industry partnership, seeks to advanced PV manufacturing technologies, reduce PV module production costs, increase module performance, and expand US commercial production capacities. Under PVMaT, manufacturers will propose specific manufacturing process improvements that may contribute to the goals of the project, which is to lessen the cost, thus hastening entry into the larger scale, grid-connected applications. Phase 1 of the PVMaT project is to identify obstacles and problems associated with manufacturing processes. This report describes the cost analysis methodology required under Phase 1 that will allow subcontractors to be ranked and evaluated during Phase 2.

Whisnant, R.A. (Research Triangle Inst., Research Triangle Park, NC (United States))

1992-09-01T23:59:59.000Z

434

SOLID OXIDE FUEL CELL MANUFACTURING COST MODEL: SIMULATING RELATIONSHIPS BETWEEN PERFORMANCE, MANUFACTURING, AND COST OF PRODUCTION  

DOE Green Energy (OSTI)

The successful commercialization of fuel cells will depend on the achievement of competitive system costs and efficiencies. System cost directly impacts the capital equipment component of cost of electricity (COE) and is a major contributor to the O and M component. The replacement costs for equipment (also heavily influenced by stack life) is generally a major contributor to O and M costs. In this project, they worked with the SECA industrial teams to estimate the impact of general manufacturing issues of interest on stack cost using an activities-based cost model for anode-supported planar SOFC stacks with metallic interconnects. An earlier model developed for NETL for anode supported planar SOFCs was enhanced by a linkage to a performance/thermal/mechanical model, by addition of Quality Control steps to the process flow with specific characterization methods, and by assessment of economies of scale. The 3-dimensional adiabatic performance model was used to calculate the average power density for the assumed geometry and operating conditions (i.e., inlet and exhaust temperatures, utilization, and fuel composition) based on publicly available polarizations curves. The SECA team provided guidance on what manufacturing and design issues should be assessed in this Phase I demonstration of cost modeling capabilities. They considered the impact of the following parameters on yield and cost: layer thickness (i.e., anode, electrolyte, and cathode) on cost and stress levels, statistical nature of ceramic material failure on yield, and Quality Control steps and strategies. In this demonstration of the capabilities of the linked model, only the active stack (i.e., anode, electrolyte, and cathode) and interconnect materials were included in the analysis. Factory costs are presented on an area and kilowatt basis to allow developers to extrapolate to their level of performance, stack design, materials, seal and system configurations, and internal corporate overheads and margin goals.

Eric J. Carlson; Yong Yang; Chandler Fulton

2004-04-20T23:59:59.000Z

435

A Program for Optimizing SRF Linac Costs  

Science Conference Proceedings (OSTI)

Every well-designed machine goes through the process of cost optimization several times during its design, production and operation. The initial optimizations are done during the early proposal stage of the project when none of the systems have been engineered. When a superconducting radio frequency (SRF) linac is implemented as part of the design, it is often a difficult decision as to the frequency and gradient that will be used. Frequently, such choices are made based on existing designs, which invariably necessitate moderate to substantial modifications so that they can be used in the new accelerator. Thus the fallacy of using existing designs is that they will frequently provide a higher cost machine or a machine with sub-optimal beam physics parameters. This paper describes preliminary results of a new software tool that allows one to vary parameters and understand the effects on the optimized costs of construction plus 10 year operations of an SRF linac, the associated cryogenic facility, and controls, where operations includes the cost of the electrical utilities but not the labor or other costs. It derives from collaborative work done with staff from Accelerator Science and Technology Centre, Daresbury, UK [1] several years ago while they were in the process of developing a conceptual design for the New Light Source project. The initial goal was to convert a spread sheet format to a graphical interface to allow the ability to sweep different parameter sets. The tools also allow one to compare the cost of the different facets of the machine design and operations so as to better understand the tradeoffs.

Powers, Thomas J. [JLAB

2013-04-01T23:59:59.000Z

436

Comparative analysis of energy costing methodologies  

SciTech Connect

The methodologies used for computing levelized busbar costs of electricity from geothermal (hydrothermal) resources used by 16 organizations active in the geothermal area are discussed. The methodologies are compared by (a) comparing the results obtained by using two standard data sets, (b) a theoretical analysis of the mathematical formulation of the embedded models, and (c) an examination of differences in data and assumptions. The objective is to attempt to resolve differences in estimates of geothermal (and conventional) electric power costs, upon which policies may be formulated and research, development and demonstration activities designed and implemented.

El-Sawy, A.H.; Leigh, J.G.; Trehan, R.K.

1979-02-01T23:59:59.000Z

437

Guide for Preparation of Contract Cost Proposals  

NLE Websites -- All DOE Office Websites (Extended Search)

NATIONAL ENERGY TECHNOLOGY LABORATORY NATIONAL ENERGY TECHNOLOGY LABORATORY 3610 Collins Ferry Road 626 Cochrans Mill Road P.O. Box 880 P.O. Box 10940, Morgantown, WV 26507-0880 Pittsburgh, PA 15236-0940 This guide is available on the Department of Energy, National Energy Technology Laboratory web site at: http://www.netl.doe.gov/business/index.html TABLE OF CONTENTS GENERAL INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rounding Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Format and Content of the Cost Proposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cost Proposal Preparation Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . .

438

2011 Cost of Wind Energy Review  

SciTech Connect

This report describes the levelized cost of energy (LCOE) for a typical land-based wind turbine installed in the United States in 2011, as well as the modeled LCOE for a fixed-bottom offshore wind turbine installed in the United States in 2011. Each of the four major components of the LCOE equation are explained in detail, such as installed capital cost, annual energy production, annual operating expenses, and financing, and including sensitivity ranges that show how each component can affect LCOE. These LCOE calculations are used for planning and other purposes by the U.S. Department of Energy's Wind Program.

Tegen, S.; Lantz, E.; Hand, M.; Maples, B.; Smith, A.; Schwabe, P.

2013-03-01T23:59:59.000Z

439

Coke gasification costs, economics, and commercial applications  

Science Conference Proceedings (OSTI)

The disposition of petroleum coke remains a problem for modern high conversion refineries. Market uncertainty and the price for coke can prevent the implementation of otherwise attractive projects. The commercially proven Texaco Gasification Process remains an excellent option for clean, cost effective coke disposition as demonstrated by the new coke gasification units coming on-line and under design. Previous papers, have discussed the coke market and general economics of coke gasification. This paper updates the current market situation and economics, and provide more details on cost and performance based on recent studies for commercial plants.

Jahnke, F.C.; Falsetti, J.S.; Wilson, R.F. [Texaco, Inc., White Plains, NY (United States)

1996-12-01T23:59:59.000Z

440

2011 Cost of Wind Energy Review  

DOE Green Energy (OSTI)

This report describes the levelized cost of energy (LCOE) for a typical land-based wind turbine installed in the United States in 2011, as well as the modeled LCOE for a fixed-bottom offshore wind turbine installed in the United States in 2011. Each of the four major components of the LCOE equation are explained in detail, such as installed capital cost, annual energy production, annual operating expenses, and financing, and including sensitivity ranges that show how each component can affect LCOE. These LCOE calculations are used for planning and other purposes by the U.S. Department of Energy's Wind Program.

Tegen, S.; Lantz, E.; Hand, M.; Maples, B.; Smith, A.; Schwabe, P.

2013-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

DOE G 430.1-1 Chp 9, Operating Costs  

Directives, Delegations, and Requirements

This chapter is focused on capital costs for conventional construction and environmental restoration and waste management projects and examines operating cost ...

1997-03-28T23:59:59.000Z

442

U.S. Crude Oil Imported Acquisition Cost by Refiners ...  

U.S. Energy Information Administration (EIA)

Release Date: 1/2/2014: Next Release Date: 2/3/2014: Referring Pages: Refiner Acquisition Cost of Imported Crude Oil ; U.S. Refiner Acquisition Cost ...

443

Low Cost Processing: Plasma, Microwave, Laser, Melting and Casting  

Science Conference Proceedings (OSTI)

Mar 5, 2013 ... Cost Affordable Titanium IV: Low Cost Processing: Plasma, ... obtained by using microwave energy as the consolidation method of Mg-Ti alloys.

444

Federal Energy Management Program: Life Cycle Cost Analysis for Sustainable  

NLE Websites -- All DOE Office Websites (Extended Search)

Life Cycle Cost Life Cycle Cost Analysis for Sustainable Buildings to someone by E-mail Share Federal Energy Management Program: Life Cycle Cost Analysis for Sustainable Buildings on Facebook Tweet about Federal Energy Management Program: Life Cycle Cost Analysis for Sustainable Buildings on Twitter Bookmark Federal Energy Management Program: Life Cycle Cost Analysis for Sustainable Buildings on Google Bookmark Federal Energy Management Program: Life Cycle Cost Analysis for Sustainable Buildings on Delicious Rank Federal Energy Management Program: Life Cycle Cost Analysis for Sustainable Buildings on Digg Find More places to share Federal Energy Management Program: Life Cycle Cost Analysis for Sustainable Buildings on AddThis.com... Sustainable Buildings & Campuses Basics

445

Energy Efficiency Improvement and Cost Saving Opportunities for...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency Improvement and Cost Saving Opportunities for the Baking Industry Title Energy Efficiency Improvement and Cost Saving Opportunities for the Baking Industry...

446

Energy Department Invests Over $7 Million to Commercialize Cost...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Over 7 Million to Commercialize Cost-Effective Hydrogen and Fuel Cell Technologies Energy Department Invests Over 7 Million to Commercialize Cost-Effective Hydrogen and Fuel...

447

Electricity Transmission Congestion Costs: A Review of Recent...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electricity Transmission Congestion Costs: A Review of Recent Reports Electricity Transmission Congestion Costs: A Review of Recent Reports This study reviews reports of congestion...

448

Parametric Analysis of the Factors Controlling the Costs of Sedimentar...  

NLE Websites -- All DOE Office Websites (Extended Search)

Several additional studies were conducted to explore the sensitivity of sedimentary geothermal system costs to key assumptions in the base case model. 1. Decreased Drilling Costs...

449

Very Low Cost Manufacturing of Titanium Alloy Components  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, 2010 TMS Annual Meeting & Exhibition. Symposium , Cost-Affordable Titanium III. Presentation Title, Very Low Cost Manufacturing...

450

Microsoft PowerPoint - Cost-Allocation Customer Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

September 19-20, 2011 Agenda Agenda OCPOCI U d t OCPOCI Update Interim Cost Allocation Methodology P d C All i Proposed Cost Allocation Analysis of Proposed...

451

Low Cost Materials and Processing - Programmaster.org  

Science Conference Proceedings (OSTI)

Feb 15, 2010 ... Cost-Affordable Titanium III: Low Cost Materials and Processing Sponsored by: The Minerals, Metals and Materials Society, TMS Structural...

452

On cost matrices with two and three distinct value...  

E-Print Network (OSTI)

Polynomially testable characterization of cost matrices associated with a ... We provide a simple alternative characterization of such cost matrices that can be...

453

On EOQ Cost Models with Arbitrary Purchase and Transportation ...  

E-Print Network (OSTI)

Abstract: We analyze an economic order quantity cost model with unit ... For the remaining purchase-transportation cost functions, when this problem becomes a ...

454

Minimum Concave Cost Flow Over a Grid Network  

E-Print Network (OSTI)

Oct 12, 2012 ... Abstract The minimum concave cost network flow problem ... a grid network with a general nonnegative separable concave cost function.

455

Strongly Polynomial Primal-Dual Algorithms for Concave Cost ...  

E-Print Network (OSTI)

Feb 13, 2012 ... Concave Cost Combinatorial Optimization Problems? ... algorithm for a concave cost problem whenever such an algorithm exists for the fixed-.

456

NETL: Energy Analyses - Cost and Performance Baseline for Fossil...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Analyses Cost and Performance Baselines for Fossil Energy Plants Overview The studies listed on this page establish estimates for the cost and performance of combustion and...

457

Freedom of Information Act - Costs | National Nuclear Security...  

National Nuclear Security Administration (NNSA)

review of documents located for responsiveness; 16% administrative costs; reproduction cost of .05 per page; and the time it took the FOIA Specialist to process the request....

458

DOE Moab Site Cost-Effectively Eliminates 200 Million Gallons...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Site Cost-Effectively Eliminates 200 Million Gallons of Contaminated Ground Water DOE Moab Site Cost-Effectively Eliminates 200 Million Gallons of Contaminated Ground Water...

459

Low Cost PEM Fuel Cell Metal Bipolar Plates  

NLE Websites -- All DOE Office Websites (Extended Search)

Background and Mission 3 Project Objectives * Overall Objective: Develop lower cost metal bipolar plates to meet performance target and 2015 cost target (<3kW) - Develop...

460

Low-Cost Prosthetics within Reach with Recycled Materials  

Science Conference Proceedings (OSTI)

Apr 19, 2010 ... Prohibitive costs aside, the design of standard prosthetic arms does ... A more recent computer rendering of the team's low-cost prosthetic arm.

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Minimum cost subset selection with two competing agents  

E-Print Network (OSTI)

do not require qualified personnel, or when internal costs proportional to skills are incurred .... In conclusion, we tackle four different versions of the minimum cost...

462

GAO Cost Estimating and Assessment Guide | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

GAO Cost Estimating and Assessment Guide GAO Cost Estimating and Assessment Guide GAO 12-Step Estimating Process.pdf More Documents & Publications EIR SOP Septmebr 2010 Microsoft...

463

The Cost to Developing Countries of Adapting to Climate Change...  

Open Energy Info (EERE)

The Cost to Developing Countries of Adapting to Climate Change Jump to: navigation, search Tool Summary Name: The Cost to Developing Countries of Adapting to Climate Change Agency...

464

Estimating Costs and Efficiency of Storage, Demand, and Heat...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

more efficient system. When considering a water heater model for your home, estimate its energy efficiency and annual operating cost. Then, compare costs with other more andor...

465

Changing the Climate: Looking Towards a More Cost Effective,...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Changing the Climate: Looking Towards a More Cost Effective, Energy Efficient Future Changing the Climate: Looking Towards a More Cost Effective, Energy Efficient Future November...

466

Definition: Reduced Meter Reading Cost | Open Energy Information  

Open Energy Info (EERE)

Meter Reading Cost Jump to: navigation, search Dictionary.png Reduced Meter Reading Cost Advanced metering infrastructure (AMI) equipment eliminates the need to send someone to...

467

Low Cost Exploration, Testing, And Development Of The Chena Geothermal...  

Open Energy Info (EERE)

Cost Exploration, Testing, And Development Of The Chena Geothermal Resource Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Paper: Low Cost Exploration,...

468

Changing the Climate: Looking Towards a More Cost Effective,...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Changing the Climate: Looking Towards a More Cost Effective, Energy Efficient Future, November 18, 2008 Changing the Climate: Looking Towards a More Cost Effective, Energy...

469

USDA - High Energy Cost Grant Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

High Energy Cost Grant Program USDA - High Energy Cost Grant Program Eligibility Commercial Industrial Institutional Local Government Municipal Utility Nonprofit Residential...

470

HEFA and F-T jet fuel cost analyses  

E-Print Network (OSTI)

Aviation and the Environment 2. HEFA jet fuel from vegetable oil bottom-up cost study 3. HEFA jet fuel from microalgae bottom-up cost

Nick Carter; Michael Bredehoeft; Christoph Wollersheim; Hakan Olcay; James Hileman; Steven Barrett; Website Lae. Mit. Edu

2012-01-01T23:59:59.000Z

471

Cost and Performance of Carbon Dioxide Capture from Power Generation...  

Open Energy Info (EERE)

on Facebook icon Twitter icon Cost and Performance of Carbon Dioxide Capture from Power Generation Jump to: navigation, search Name Cost and Performance of Carbon Dioxide...

472

Changes related to "Cost and Performance of Carbon Dioxide Capture...  

Open Energy Info (EERE)

icon Changes related to "Cost and Performance of Carbon Dioxide Capture from Power Generation" Cost and Performance of Carbon Dioxide Capture from Power Generation...

473

Low Cost High Concentration PV Systems for Utility Power Generation...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Other Agencies You are here Home Low Cost High Concentration PV Systems for Utility Power Generation Low Cost High Concentration PV Systems for Utility Power Generation An...

474

Low Cost High Concentration PV Systems for Utility Power Generation...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Other Agencies You are here Home Low Cost High Concentration PV Systems for Utility Power Generation Amonix, Inc. Low Cost High Concentration PV Systems for Utility Power...

475

Optimization of Transmission Line Design Using Life Cycle Costing  

Science Conference Proceedings (OSTI)

When an overhead line is designed, all costs incurred during the expected life of the line should be considered. The total cost during the life or life-cycle cost of a transmission line is a combination of the initial capital cost, operation and maintenance (O&M) cost, cost of electrical losses over its entire life, and dependability associated costs. The option that has the lowest life-cycle cost is selected as the optimized design. A tool is required by utility engineers to help them readily select an ...

2009-12-22T23:59:59.000Z

476

Cost Transfers Involving Sponsored Projects Directives and Procedures  

E-Print Network (OSTI)

Cost Transfers Involving Sponsored Projects Directives and Procedures Responsible Office: Office....................................................................................................................2 1.3 Cost Transfer.................................................................................................................2 2. Project Management

Watson, Craig A.

477

DOE Hydrogen Analysis Repository: Costs of Storing and Transporting...  

NLE Websites -- All DOE Office Websites (Extended Search)

Costs of Storing and Transporting Hydrogen Project Summary Full Title: Costs of Storing and Transporting Hydrogen Project ID: 114 Principal Investigator: Wade Amos Purpose An...

478

Cost and Performance Baseline for Fossil Energy Plants  

NLE Websites -- All DOE Office Websites (Extended Search)

Baseline for Fossil Energy Plants Volume I (May 2007) Cost and Performance Baseline for Fossil Energy Plants, Volume I Report Desk Reference Presentation Slides "Gasification Costs...

479

Benefits and Costs of Aggressive Energy Efficiency Programs and...  

NLE Websites -- All DOE Office Websites (Extended Search)

Benefits and Costs of Aggressive Energy Efficiency Programs and the Impacts of Alternative Sources of Funding: Case Study of Massachusetts Title Benefits and Costs of Aggressive...

480

Energy Department Report Calculates Emissions and Costs of Power...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Report Calculates Emissions and Costs of Power Plant Cycling Necessary for Increased Wind and Solar in the West Energy Department Report Calculates Emissions and Costs of Power...

Note: This page contains sample records for the topic "lucie costs salem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Levelized Cost of New Generation Resources in the Annual Energy ...  

U.S. Energy Information Administration (EIA)

costs, the levelized cost ... 4 These results do not include targeted tax credits such as the production or investment tax credit available for some technologies.

482

Lot Sizing with Piecewise Concave Production Costs - Optimization ...  

E-Print Network (OSTI)

Feb 14, 2013 ... Abstract: We study the lot-sizing problem with piecewise concave production costs and concave holding costs. This problem is a generalization...

483

,,,,,,,,,,"Lease Equipment Costs for Primary Oil Production in...  

U.S. Energy Information Administration (EIA) Indexed Site

of Lease Equipment Costs for Primary Oil Recovery ",,,"Oil Production--West Texas" ,,"Operations (10 Producing Wells)" ,,,"Lease Equipment Costs for Primary Oil...

484

DOE Hydrogen Analysis Repository: Automotive System Cost Model...  

NLE Websites -- All DOE Office Websites (Extended Search)

Automotive System Cost Model (ASCM) Project Summary Full Title: Automotive System Cost Model (ASCM) Project ID: 118 Principal Investigator: Sujit Das Purpose Estimate current and...

485

Cost of Increased Energy Efficiency for Residential Water Heaters  

NLE Websites -- All DOE Office Websites (Extended Search)

distributor, and installer costs are used to calculate the costs of different water heater designs. Consumer operating expenses are calculated based on the modeled energy...

486

Optimization of Transmission Line Design Using Life-Cycle Costing  

Science Conference Proceedings (OSTI)

When an overhead line is designed, all costs incurred during the expected life of the line should be considered. The total cost during the life, or life-cycle cost, of a transmission line is a combination of the initial capital cost, operation and maintenance (O&M) cost, cost of electrical losses over its entire life, and dependability-associated costs. The option that has the lowest life-cycle cost is selected as the optimized design. A tool is required by utility engineers to help them readily select a...

2008-12-09T23:59:59.000Z

487

Identifying Cost-Effective Residential Energy Efficiency Opportunities...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Identifying Cost-Effective Residential Energy Efficiency Opportunities for the Kauai Island Utility Cooperative Identifying Cost-Effective Residential Energy Efficiency...

488

Federal Energy Management Program: Energy Cost Calculator for...  

NLE Websites -- All DOE Office Websites (Extended Search)

Urinals to someone by E-mail Share Federal Energy Management Program: Energy Cost Calculator for Urinals on Facebook Tweet about Federal Energy Management Program: Energy Cost...

489

Cost analysis of multicast transport architectures in multiservice networks  

Science Conference Proceedings (OSTI)

Keywords: backbone network topology, cost-based routing algorithms, data flow costs, link sharing, multicast architectures, multicast routing, multisource flow specification

K. Ravindran; Ting-Jian Gong

1998-02-01T23:59:59.000Z

490

The Total Cost and Measured Performance of Utility-Sponsored...  

NLE Websites -- All DOE Office Websites (Extended Search)

The Total Cost and Measured Performance of Utility-Sponsored Energy Efficiency Programs Title The Total Cost and Measured Performance of Utility-Sponsored Energy Efficiency...

491

Cutting Electricity Costs in Miami-Dade County, Florida | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sites Power Marketing Administration Other Agencies You are here Home Cutting Electricity Costs in Miami-Dade County, Florida Cutting Electricity Costs in Miami-Dade County,...

492

Energy Efficiency Improvement and Cost Saving Opportunities for...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency Improvement and Cost Saving Opportunities for the Glass Industry Title Energy Efficiency Improvement and Cost Saving Opportunities for the Glass Industry...

493

Energy Efficiency Improvement and Cost Saving Opportunities for...  

NLE Websites -- All DOE Office Websites (Extended Search)

Improvement and Cost Saving Opportunities for the Pulp and Paper Industry Title Energy Efficiency Improvement and Cost Saving Opportunities for the Pulp and Paper Industry...

494

Energy Efficiency Improvement and Cost Saving Opportunities for...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency Improvement and Cost Saving Opportunities for the Dairy Processing Industry Title Energy Efficiency Improvement and Cost Saving Opportunities for the Dairy...

495

ESS 2012 Peer Review - Reducing the Costs of Manufacturing Flow...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and power generation. * Design and material cost reductions are a means to reducing battery costs. * Is it possible to accelerate the knowledge building that comes from...

496

Updated Capital Cost Estimates for Electricity Generation Plants  

Reports and Publications (EIA)

This paper provides information on the cost of building new electricity power plants. These cost estimates are critical inputs in the development of energy projections and analyses.

Michael Leff

2010-11-18T23:59:59.000Z

497

Secretary Moniz Announces New Biofuels Projects to Drive Cost...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Announces New Biofuels Projects to Drive Cost Reductions, Technological Breakthroughs Secretary Moniz Announces New Biofuels Projects to Drive Cost Reductions, Technological...

498

Estimating Well Costs for Enhanced Geothermal System Applications  

SciTech Connect

The objective of the work reported was to investigate the costs of drilling and completing wells and to relate those costs to the economic viability of enhanced geothermal systems (EGS). This is part of a larger parametric study of major cost components in an EGS. The possibility of improving the economics of EGS can be determined by analyzing the major cost components of the system, which include well drilling and completion. Determining what costs in developing an EGS are most sensitive will determine the areas of research to reduce those costs. The results of the well cost analysis will help determine the cost of a well for EGS development.

K. K. Bloomfield; P. T. Laney

2005-08-01T23:59:59.000Z

499

WREF 2012: THE PAST AND FUTURE COST OF WIND ENERGY  

E-Print Network (OSTI)

Moreover, useful cost projections are likely to benefit fromutilize an iterative projection process involving historicalto determine whether projections of future costs are

Wiser, Ryan

2013-01-01T23:59:59.000Z

500

New Process for Producing Styrene Cuts Costs, Saves Energy, and...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Process for Producing Styrene Cuts Costs, Saves Energy, and Reduces Greenhouse Gas Emissions New Process for Producing Styrene Cuts Costs, Saves Energy, and Reduces Greenhouse...