National Library of Energy BETA

Sample records for low-energy building research

  1. Research on Very Low-Energy Building Operations and Management Methods |

    Energy Savers [EERE]

    Department of Energy on Very Low-Energy Building Operations and Management Methods Research on Very Low-Energy Building Operations and Management Methods Lead Performer: U.S.-China Clean Energy Research Center (CERC) - Lawrence Berkeley National Laboratory Project Partners: -- Center of Science and Technology of Construction (CSTC), Ministry of Housing and Urban-Rural Development (MOHURD) - Beijing, China -- China Academy of Building Research - Bejing, China -- Sustainable Energy

  2. Research on Very Low-Energy Building Operations and Management...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    a national building energy database, benchmarking tool, and policy framework in China. ... in Chinese policy, such as inclusion of benchmarking in China's 13th Five-Year Plan. ...

  3. #F1:Research on Very Low-Energy Building O&M Methods

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... on ENERGY STAR methodology, with customizations for China (i.e., data points for normalization). Policy framework draws on ENERGY STAR and NRDC research (focus on building ...

  4. Reducing Data Center Loads for a Large-Scale, Low-Energy Office Building: NREL's Research Support Facility (Book)

    SciTech Connect (OSTI)

    Sheppy, M.; Lobato, C.; Van Geet, O.; Pless, S.; Donovan, K.; Powers, C.

    2011-12-01

    This publication detailing the design, implementation strategies, and continuous performance monitoring of NREL's Research Support Facility data center. Data centers are energy-intensive spaces that facilitate the transmission, receipt, processing, and storage of digital data. These spaces require redundancies in power and storage, as well as infrastructure, to cool computing equipment and manage the resulting waste heat (Tschudi, Xu, Sartor, and Stein, 2003). Data center spaces can consume more than 100 times the energy of standard office spaces (VanGeet 2011). The U.S. Environmental Protection Agency (EPA) reported that data centers used 61 billion kilowatt-hours (kWh) in 2006, which was 1.5% of the total electricity consumption in the U.S. (U.S. EPA, 2007). Worldwide, data centers now consume more energy annually than Sweden (New York Times, 2009). Given their high energy consumption and conventional operation practices, there is a potential for huge energy savings in data centers. The National Renewable Energy Laboratory (NREL) is world renowned for its commitment to green building construction. In June 2010, the laboratory finished construction of a 220,000-square-foot (ft{sup 2}), LEED Platinum, Research Support Facility (RSF), which included a 1,900-ft{sup 2} data center. The RSF will expand to 360,000 ft{sup 2} with the opening of an additional wing December, 2011. The project's request for proposals (RFP) set a whole-building demand-side energy use requirement of a nominal 35 kBtu/ft{sup 2} per year. On-site renewable energy generation will offset the annual energy consumption. To support the RSF's energy goals, NREL's new data center was designed to minimize its energy footprint without compromising service quality. Several implementation challenges emerged during the design, construction, and first 11 months of operation of the RSF data center. This document highlights these challenges and describes in detail how NREL successfully overcame them. The IT settings and strategies outlined in this document have been used to significantly reduce data center energy requirements in the RSF; however, these can also be used in existing buildings and retrofits.

  5. Reducing Plug and Process Loads for a Large Scale, Low Energy Office Building: NREL's Research Support Facility; Preprint

    SciTech Connect (OSTI)

    Lobato, C.; Pless, S.; Sheppy, M.; Torcellini, P.

    2011-02-01

    This paper documents the design and operational plug and process load energy efficiency measures needed to allow a large scale office building to reach ultra high efficiency building goals. The appendices of this document contain a wealth of documentation pertaining to plug and process load design in the RSF, including a list of equipment was selected for use.

  6. Passive and low energy research and development: a global view

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1984-01-01

    Passive and low energy applications in buildings have become a topic of worldwide interest within the last few years. It has now been demonstrated very clearly that indoor comfort can be maintained with an expenditure of only 10 to 20% of the energy often required by modern buildings. This is accomplished through a combination of conservation measures to minimize the load, passive use of solar energy for heating, natural cooling, and daylighting. The major research emphasis has been on devising mathematical models to characterize heat flow within buildings, on the validation of these models by comparison with test results, and on the subsequent use of the models to investigate the influence of both design parameters and weather on system performance. Design guidelines have been developed, and simplified methods of analysis have been promulgated. Performance has been monitored in test modules, test buildings, and many residential and commercial buildings. The results both confirm good performance and establish the accuracy of model predictions. A significant change in the research picture has been seen in the last 4 years; whereas the major effort was originally in the United States, research is now being conducted in many countries throughout the world as many people have realized that passive and low energy methods are appropriate in virtually every climate and are well suited to economic, convenient, and reliable building construction and operation.

  7. FLEXLAB (Facility for Low Energy eXperiments in Buildings)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FLEXLAB (Facility for Low Energy eXperiments in Buildings) 2014 Building Technologies Office Peer Review Cindy Regnier, CMRegnier@lbl.gov Lawrence Berkeley National Lab Project Summary - FLEXLAB Operational Launch & Support Timeline: Start date: October 1, 2013 Planned end date: September 30, 2014 - Ongoing Key Milestones 1. Workshop on business model, logic models and success metrics - Oct 2013 2. Logic models and success metrics, Go/No Go - Jan 2014 3. Industry partner commitments and

  8. Extremely Low-Energy Design for Army Buildings: Tactical Equipment Maintenance Facility: Preprint

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Extremely Low-Energy Design for Army Buildings: Tactical Equipment Maintenance Facility Preprint Rois Langner and Michael Deru National Renewable Energy Laboratory Alexander Zhivov, Richard Liesen, and Dale Herron U.S. Army Engineer Research and Development Center Presented at the 2012 ASHRAE Winter Conference Chicago, Illinois January 21-25, 2012 Conference Paper NREL/CP-5500-53810 March 2012 NOTICE The submitted manuscript has been offered by an employee of the Alliance for Sustainable Energy,

  9. Integration of Low Energy Technologies for Optimal Building and Space Conditioning Design

    SciTech Connect (OSTI)

    D.E. Fisher

    2006-01-07

    EnergyPlus is the DOE's newest building energy simulation engine. It was developed specifically to support the design of low energy building systems. This project focused on developing new low energy building simulation models for EnergyPlus, verifying and validating new and existing EnergyPlus models and transferring the new technology to the private sector. The project focused primarily on geothermal and radiant technologies, which are related by the fact that both are based on hydronic system design. As a result of this project eight peer reviewed journal and conference papers were added to the archival literature and five technical reports were published as M.S. theses and are available in the archival literature. In addition, several reports, including a trombe wall validation report were written for web publication. Thirteen new or significantly enhanced modules were added to the EnergyPlus source code and forty-two new or significantly enhanced sections were added to the EnergyPlus documentation as a result of this work. A low energy design guide was also developed as a pedagogical tool and is available for web publication. Finally several tools including a hybrid ground source heat pump optimization program and a geothermal heat pump parameter estimation tool were developed for research and design and are available for web publication.

  10. Russias R&D for Low Energy Buildings: Insights for Cooperation with Russia

    SciTech Connect (OSTI)

    Schaaf, Rebecca E.; Evans, Meredydd

    2010-05-01

    Russian buildings, Russian buildings sector energy consumption. Russian government has made R&D investment a priority again. The government and private sector both invest in a range of building energy technologies. In particular, heating, ventilation and air conditioning, district heating, building envelope, and lighting have active technology research projects and programs in Russia.

  11. NREL: Buildings Research - Commercial Buildings Research Staff

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Commercial Buildings Research Staff Members of the Commercial Buildings research staff have backgrounds in architectural, civil, electrical, environmental, and mechanical engineering, as well as computer science, physics, and chemistry. Brian Ball Kyle Benne Willy Bernal Eric Bonnema Larry Brackney Michael Deru Kristin Field-Macumber Katherine Fleming Stephen Frank Luigi Gentile Polese David Goldwasser Rob Guglielmetti Gregor Henze Adam Hirsch Eric Kozubal Feitau Kung Rois Langner Edwin Lee

  12. NREL: Buildings Research - Residential Buildings Research Staff

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Residential Buildings Research Staff Members of the Residential Buildings research staff have backgrounds in architectural, civil, electrical, environmental, and mechanical engineering, as well as environmental design and physics. Kyri Baker Chuck Booten Craig Christensen Dane Christensen Lieko Earle Mike Heaney Scott Horowitz Xin Jin Jeff Maguire Noel Merket Tim Merrigan Lucas Phillips Ben Polly David Roberts Joseph Robertson Stacey Rothgeb Bethany Sparn Eric Wilson Jon Winkler Jason Woods

  13. NREL Buildings Research Video

    ScienceCinema (OSTI)

    None

    2013-05-29

    Through research, the National Renewable Energy Laboratory (NREL) has developed many strategies and design techniques to ensure both commercial and residential buildings use as little energy as possible and also work well with the surroundings. Here you will find a video that introduces the work of NREL Buildings Research, highlights some of the facilities on the NREL campus, and demonstrates these efficient building strategies. Watch this video to see design highlights of the Science and Technology Facility on the NREL campus?the first Federal building to be LEED® Platinum certified. Additionally, the video demonstrates the energy-saving features of NRELs Thermal Test Facility. For a text version of this video visit http://www.nrel.gov/buildings/about_research_text_version.html

  14. NREL: Buildings Research - Events

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Events Below are upcoming events related to buildings research. March 2016 Sustainable NREL Walking Campus Tour March 18, 2016, 9:30 - 11:15 am Golden, CO Contact: NREL Education...

  15. NREL: Buildings Research Home Page

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Buildings Research Artist's rendering of the courtyard view of NREL's new Research Support Facility. NREL's buildings research teams lead efforts in developing cutting-edge...

  16. Advanced Ground Source Heat Pump Technology for Very-Low-Energy Buildings

    Broader source: Energy.gov [DOE]

    Lead Performer: Oak Ridge National Laboratory - Oak Ridge, TN Partners: -- ClimateMaster - Oklahoma City, OK -- Oklahoma State University - Stillwater, OK -- Oklahoma Gas & Electric - Oklahoma City, OK -- International Ground Source Heat Pump Association - Stillwater, OK -- Chinese Academy of Building Research - Beijing, China -- Tongji University - Shanghai, China -- Tianjin University - Tianjin, China -- Chongqin University - Chongqing, China

  17. Passive solar buildings research

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1992-12-31

    This chapter covers research advances in passive solar buildings research during the time span from 1982 through 1991. These advances fall within the following categories: (1) short-term energy monitoring, (2) heat transport by natural convection within buildings, and (3) design guidelines and design tools. In short-term energy monitoring, a simulation model of the building is calibrated, based on data taken in a 3-day test. The method accurately predicts performance over an extended period. Heat transport through doorways is characterized for complex situations that arise in passive solar buildings. Simple concepts and models adequately describe the energy transport in many situations of interest. In a new approach, design guidelines are automatically generated for any specific locality. Worksheets or an accompanying computer program allow the designer to quickly and accurately evaluate performance and investigate design alternatives. 29 refs., 19 figs., 2 tabs.

  18. NREL: Buildings Research - Webmaster

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Webmaster Please enter your name and e-mail address in the boxes provided, then type your message below. When you are finished, click "Send Message." NOTE: If you enter your e-mail address incorrectly, we will be unable to reply. Your name: Your email address: Your message: Send Message Printable Version Buildings Research Home Commercial Buildings Residential Buildings Facilities Working with Us Publications News Did you find what you needed? Yes 1 No 0 Thank you for your feedback.

  19. Building | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building We're creating infrastructure, refining materials and assembling technologies that accommodate our constantly changing world. Home > Impact > Building How Green Is Green? GE's Global Research Center's Ecoassessment Center of Excellence was created to study the impact of GE products and services... Read More » Technology: Driving the Artificial Lift Market Gary Ford, president and CEO of GE Artificial Lift, discusses what the equipment does, the current state of the market and

  20. Building | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building We're creating infrastructure, refining materials and assembling technologies that accommodate our constantly changing world. Home > Impact > Building Advanced Laser Manufacturing Tools Deliver Higher Performance In a research lab looking far, far into the future, a team of scientists and engineers from GE are developing next-generation... Read More » The Future of Additive Manufacturing Additive manufacturing has begun to generate real excitement within the larger manufacturing

  1. Building | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building We're creating infrastructure, refining materials and assembling technologies that accommodate our constantly changing world. Home > Impact > Building Bringing a Digital Mindset to Manufacturing The digital age will provide manufacturing insights that will save money and transform how we work across supply chains. By... Read More » What is the GE store? Mark Little, CTO & Head of Global Research at GE, describes what the GE Store means and why it's important to GE. The GE...

  2. Building America System Research

    Broader source: Energy.gov [DOE]

    Residential Buildings Integration Project for the 2013 Building Technologies Office's Program Peer Review

  3. Building America System Research

    SciTech Connect (OSTI)

    2013-04-01

    Residential Buildings Integration Project for the 2013 Building Technologies Office's Program Peer Review

  4. Extremely Low-Energy Design for Army Buildings: Tactical Equipment Maintenance Facility; Preprint

    SciTech Connect (OSTI)

    Langner, R.; Deru, M.; Zhivov, A.; Liesen, R.; Herron, D.

    2012-03-01

    This paper describes the integrated energy optimization process for buildings and building clusters and demonstrates this process for new construction projects and building retrofits. An explanation is given of how mission critical building loads affect possible site and source energy use reduction in Army buildings.

  5. NREL: Buildings Research - Facilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    building technologies and innovations that deliver significant energy savings in buildings, and the new facilities further extend those capabilities. In addition, the NREL...

  6. Comparison of Demand Response Performance with an EnergyPlus Model in a Low Energy Campus Building

    SciTech Connect (OSTI)

    Dudley, Junqiao Han; Black, Doug; Apte, Mike; Piette, Mary Ann; Berkeley, Pam

    2010-05-14

    We have studied a low energy building on a campus of the University of California. It has efficient heating, ventilation, and air conditioning (HVAC) systems, consisting of a dual-fan/dual-duct variable air volume (VAV) system. As a major building on the campus, it was included in two demand response (DR) events in the summers of 2008 and 2009. With chilled water supplied by thermal energy storage in the central plant, cooling fans played a critical role during DR events. In this paper, an EnergyPlus model of the building was developed and calibrated. We compared both whole-building and HVAC fan energy consumption with model predictions to understand why demand savings in 2009 were much lower than in 2008. We also used model simulations of the study building to assess pre-cooling, a strategy that has been shown to improve demand saving and thermal comfort in many types of building. This study indicates a properly calibrated EnergyPlus model can reasonably predict demand savings from DR events and can be useful for designing or optimizing DR strategies.

  7. Extend EnergyPlus to Support Evaluation, Design, and Operation of Low Energy Buildings

    SciTech Connect (OSTI)

    Cho, Heejin; Wang, Weimin; Makhmalbaf, Atefe; Yun, Kyung Tae; Glazer, Jason; Scheier, Larry; Srivastava, Viraj; Gowri, Krishnan

    2011-12-21

    During FY10-11, Pacific Northwest National Laboratory in collaboration with the EnergyPlus development team implemented the following high priority enhancements to support the simulation of high performance buildings: (1) Improve Autosizing of Heating, Ventilation, and Air Conditioning (HVAC) Components; (2) Life-Cycle Costing to Evaluate Energy Efficiency Upgrades; (3) Develop New Model to Capture Transformer Losses; (4) Enhance the Model for Electric Battery Storage; and (5) Develop New Model for Chiller-Tower Optimization. This report summarizes the technical background, new feature development and implementation details, and testing and validation process for these enhancements. The autosizing, life-cycle costing and transformer model enhancements/developments were included in EnergyPlus release Version 6.0, and the electric battery model development will be included in Version 7.0. The model development of chiller-tower optimization will be included in a later version (after Version 7.0).

  8. LOW-ENERGY NUCLEAR PHYSICS NATIONAL HPC INITIATIVE: BUILDING A UNIVERSAL NUCLEAR ENERGY DENSITY FUNCTIONAL (UNEDF)

    SciTech Connect (OSTI)

    Bulgac, A

    2013-03-27

    This document is a summary of the physics research carried out by the University of Washington centered group. Attached are reports for the previous years as well as the full exit report of the entire UNEDF collaboration.

  9. Using an Energy Performance Based Design-Build Process to Procure a Large Scale Low-Energy Building: Preprint

    SciTech Connect (OSTI)

    Pless, S.; Torcellini, P.; Shelton, D.

    2011-05-01

    This paper will review a procurement, acquisition, and contract process of a large-scale replicable net zero energy (ZEB) office building. The owners developed and implemented an energy performance based design-build process to procure a 220,000 ft2 office building with contractual requirements to meet demand side energy and LEED goals. We will outline the key procurement steps needed to ensure achievement of our energy efficiency and ZEB goals. The development of a clear and comprehensive Request for Proposals (RFP) that includes specific and measurable energy use intensity goals is critical to ensure energy goals are met in a cost effective manner. The RFP includes a contractual requirement to meet an absolute demand side energy use requirement of 25 kBtu/ft2, with specific calculation methods on what loads are included, how to normalize the energy goal based on increased space efficiency and data center allocation, specific plug loads and schedules, and calculation details on how to account for energy used from the campus hot and chilled water supply. Additional advantages of integrating energy requirements into this procurement process include leveraging the voluntary incentive program, which is a financial incentive based on how well the owner feels the design-build team is meeting the RFP goals.

  10. NREL: Buildings Research - Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (2012). 1 pg.; NREL Report No. FS-5500-53735; DOEGO-102012-3491. NREL Demonstrates Game-Changing Air Conditioner Technology (Fact Sheet), Highlights in Research &...

  11. Building America Research | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Research Building America Research The DOE Building America Program is helping to create homes that are durable and energy efficient. Research-to-Market BA_Research_Image.png Learn how Building America works to accelerate the development and adoption of advanced building energy technologies and practices. Top Innovations 1-1-2 Adv Framing open header.jpg Read about oustanding Building America research achievements. Research Teams hirl3.jpg Learn about the Building America teams

  12. Building America Research Tools | Department of Energy

    Energy Savers [EERE]

    Tools & Resources » Building America Research Tools Building America Research Tools Building America provides technical tools to support researchers and building industry professionals in ensuring consistent research results for new and existing homes. The following resources can be used to evaluate optimal building designs, access performance and cost data, execute field tests, and track research progress. Image is a rendering of a two-story residential building with an entrance on the

  13. Building America Webinar: Building America Research Tools | Department of

    Energy Savers [EERE]

    Energy Research Tools Building America Webinar: Building America Research Tools This webinar was held on March 18, 2015, and reviewed Building America research tools, including: Field Test Best Practices, Building Energy Optimization (BEopt) software, and the National Residential Efficiency Measures Database. These tools were created to support best practices in the building science community. Presenters and specific topics for this webinar included: * Lieko Earle and Bethany Sparn, National

  14. NREL: Buildings Research - Challenges in Commercial Buildings

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Challenges in Commercial Buildings Whether your focus is new construction or existing facilities, renewable resources or energy efficiency, the National Renewable Energy Laboratory...

  15. Building America Research Teams | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    America Research Teams Building America Research Teams Building America team members are experts in the field of residential building science and have access to world-class research facilities, partners, and key personnel, ensuring successful progress toward U.S. Department of Energy (DOE) goals. These teams work with industry partners to design, test, upgrade, and build technologies and high performance homes using strategies that significantly cut energy use. Learn more about Building America

  16. COMMENTS ON "A NEW LOOK AT LOW-ENERGY NUCLEAR REACTION RESEARCH"

    SciTech Connect (OSTI)

    Shanahan, K.

    2009-12-30

    Cold fusion researchers have accumulated a large body of anomalous results over the last 20 years that they claim proves a new, mysterious nuclear reaction is active in systems they study. Krivit and Marwan give a brief and wholly positive view of this body of research. Unfortunately, cold fusion researchers routinely ignore conventional explanations of their observations, and claim much greater than real accuracy and precision for their techniques. This paper attempts to equally briefly address those aspects of the field with the intent of providing a balanced view of the field, and to establish some criteria for subsequent publications in this arena.

  17. Building America Residential Energy Efficiency Research Planning...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research Planning Meeting: October 2011 Building America Residential Energy Efficiency Research Planning Meeting: October 2011 On this page, you may link to the summary report and ...

  18. Building America Webinar: Building America: Research for Real...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research for Real-World Results This presentation was delivered on Dec. 17, 2014, by Eric Werling, Building America Research Coordinator. PDF icon bawebinarwerling12-17-14.pd...

  19. NREL: Buildings Research - Residential Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a row of homes in the distance. The NREL Residential Buildings group is an innovative, multidisciplinary team focused on accelerating the adoption of cost-effective energy...

  20. Building America Puts Residential Research Results To Work; Building America Research That Works (Fact Sheet)

    SciTech Connect (OSTI)

    2009-01-18

    Residential buildings use more than 20% of the energy consumed annually in the United States. To help reduce that energy use, the Department of Energy (DOE) and its Building America partners conduct research to develop advanced building energy systems tha

  1. Building America Research-to-Market Plan

    SciTech Connect (OSTI)

    Werling, Eric

    2015-11-01

    This report presents the Building America Research-to-Market Plan (Plan), including the integrated Building America Technology-to-Market Roadmaps (Roadmaps) that will guide Building America’s research, development, and deployment (RD&D) activities over the coming years. The Plan and Roadmaps will be updated as necessary to adapt to research findings and evolving stakeholder needs, and they will reflect input from DOE and stakeholders.

  2. Building America Research-to-Market Plan

    Energy Savers [EERE]

    Research-to-Market Plan November 2015 Prepared by Confluence Communications and Energetics Incorporated for: The Building America Program Residential Buildings Integration Building Technologies Office Office of Energy Efficiency and Renewable Energy U.S. Department of Energy Project Manager and Technical Editor: Eric Werling Building America Program Director (This page intentionally left blank) Executive Summary i Executive Summary This report was prepared by the U.S. Department of Energy's

  3. NREL: Buildings Research - News Release Archives

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 November 15, 2006 NREL Teams with Habitat for Humanity to Build Zero Energy Home This three bedroom home in Denver is not only affordable, it's a zero energy home! September 1, 2006 NREL Study Shows Energy Analysts the "Least-Cost" Path to Zero Energy A study by NREL building researchers gives energy analysts and other building professionals the most cost effective path to zero energy consumption. Archives Current News

  4. Building America Research-to-Market Process | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research » Building America Research-to-Market Process Building America Research-to-Market Process Read the Building America Research-to-Market Plan. The Building America Program conducts applied research, development, and deployment in residential buildings. Building America projects are led by U.S. Department of Energy (DOE) national laboratories and expert building science teams in partnership with leading industry players (e.g., builders, contractors, and manufacturers). Building America's

  5. Research update, existing buildings research, 1989--1991

    SciTech Connect (OSTI)

    MacDonald, J.M.; Ternes, M.P.; Mixon, W.R.; Sharp, T.R.; Kolb, J.O.; Wilkes, K.E. ); Diamond, R.C. ); Judkoff, R. ); Mazzucchi, R.P. )

    1993-02-01

    This Research Update presents the status of the Existing Buildings Research program of the Office of Building Technologies of the US Department of Energy for the period 1989-199 1. This program covers research on energy efficiency improvements for the residential and commercial buildings in this country. ne Existing Buildings Research program has contributed to significant improvements in energy efficiency of existing buildings by development of improvements to retrofit technologies, by coordinating and conducting research studies on the use of energy efficiency technologies (to reduce barriers and increase use), and by continually evaluating changes in technologies that could improve and maintain buildings energy efficiency. If the energy efficiency of the buildings sector in this country is to be dramatically improved over the next 30 years, we must improve the use of energy efficiency technologies. Improved delivery of measures, improved understanding of how buildings actually perform in the field, and methods for improving operations and maintenance of buildings and energy equipment are all examples of ways to improve the deployment (transfer) of technologies. Much has been learned about technology deployment in buildings in the first five years of the program, and our future plans will be directed at continuing the improvements and making a real contribution to the energy efficiency future of the United States.

  6. EERE's Building Technologies PowerPoint Presentation Template

    U.S. Energy Information Administration (EIA) Indexed Site

    Application of Building Energy Consumption Data in Low-Energy Building Research Drury B. ...docsfy08osti41957.pdf * Methodology for Analyzing the Technical Potential ...

  7. Advanced Residential Buildings Research; Electricity, Resources, & Building Systems Integration (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-09-01

    Factsheet describing the Advanced Residential Buildings Research group within NREL's Electricity, Resources, and Buildings Systems Integration Center.

  8. Advanced Commercial Buildings Research; Electricity, Resources, & Building Systems Integration (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-09-01

    Factsheet describing the Advanced Commercial Buildings Research group within NREL's Electricity, Resources, and Buildings Systems Integration Center.

  9. Building America Research Teams: Spotlight on Alliance for Residential

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building Innovation (ARBI) and Building America Research Alliance (BARA) | Department of Energy Research Teams: Spotlight on Alliance for Residential Building Innovation (ARBI) and Building America Research Alliance (BARA) Building America Research Teams: Spotlight on Alliance for Residential Building Innovation (ARBI) and Building America Research Alliance (BARA) January 14, 2015 - 7:03pm Addthis R&D→Innovation→Partnership→Demonstration→Market Transformation-hallmarks of

  10. 2013 Building America Research Planning Meeting Summary

    SciTech Connect (OSTI)

    Metzger, C.; Hunt, S.

    2014-02-01

    The Building America Research Planning Meeting was held October 28-30, 2013, in Washington, DC. This meeting provides one opportunity each year for the research teams, national laboratories and Department of Energy (DOE) managers to meet in person to share the most pertinent information and collaboration updates. This report documents the presentations, highlights key program updates, and outlines next steps for the program.

  11. NREL: Buildings Research - News Release Archives

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Printable Version Buildings Research Home Commercial Buildings Residential Buildings Facilities Working with Us Publications News Did you find what you needed? Yes 1 No 0 Thank you for your feedback. Would you like to take a moment to tell us how we can improve this page? Submit We value your feedback. Thanks! We've received your feedback. Something went wrong. Please try again later. NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable

  12. NREL's Buildings Research Honored by Architecture Magazine

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL's Buildings Research Honored by Architecture Magazine For more information contact: Kerry Masson, (303) 275-4083 Golden, Colo., January 15, 1997—Architecture magazine's Progressive Architecture Award went to the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) and the Passive Solar Industries Council today for their joint efforts in designing energy-efficient buildings. The prestigious award is one of two given annually for outstanding contributions to architectural

  13. Code Gaps and Future Research Needs of Combustion Safety: Building...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Code Gaps and Future Research Needs of Combustion Safety: Building America Expert Meeting Update Code Gaps and Future Research Needs of Combustion Safety: Building America Expert...

  14. Opportunities for Building America Research to Address Energy...

    Energy Savers [EERE]

    Opportunities for Building America Research to Address Energy Upgrade Technical Challenges: HVAC, Envelope and IAQ (301) Opportunities for Building America Research to Address...

  15. ConSol (Building Industry Research Alliance) | Open Energy Information

    Open Energy Info (EERE)

    ConSol (Building Industry Research Alliance) Jump to: navigation, search Name: ConSol (Building Industry Research Alliance) Place: Stockton, CA Website: www.consol.com References:...

  16. Building America Special Research Project: High-R Walls Case...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Special Research Project: High-R Walls Case Study Analysis Building America Special Research Project: High-R Walls Case Study Analysis This report considers a ...

  17. 2013 Building America Research Planning Meeting Summary

    SciTech Connect (OSTI)

    Metzger, C. E.; Hunt, S.

    2014-02-01

    The Building America (BA) Research Planning Meeting was held October 28-30, 2013, in Washington, DC. This meeting provides one opportunity each year for the research teams, national laboratories and Department of Energy (DOE) managers to meet in person to share the most pertinent information and collaboration updates. This report documents the presentations, highlights key program updates, and outlines next steps for the program.

  18. Towards SustainabilityGreen Building, Sustainability Objectives, and Building America Whole House Systems Research

    SciTech Connect (OSTI)

    none,

    2008-02-01

    This paper discusses Building America whole-house systems research within the broad effort to reduce or eliminate the environmental impact of building and provides specific recommendations for future Building America research based on Building Science Corporations experience with several recent projects involving green home building programs.

  19. DOE Announces Webinars on the Buildings of the Future Research...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Eastern Standard Time. The webinar will launch the Buildings of the Future Research project and provide guidance for how building technology practitioners, academics, and ...

  20. Research and Development Roadmap: Windows and Building Envelope...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Development Roadmap: Windows and Building Envelope Research and Development Roadmap: Windows and Building Envelope Cover of windows and envelope report, depicting a house, ...

  1. Shenzhen Institute of Building Research SIBR | Open Energy Information

    Open Energy Info (EERE)

    technology research institute for buildings and urban development. The body is working on solar panel design and installation in China. References: Shenzhen Institute of Building...

  2. Building America FY14 Research Projects by Research Team | Department of

    Energy Savers [EERE]

    Energy Research Projects by Research Team Building America FY14 Research Projects by Research Team This table shows the U.S. Department of Energy Building America FY14 research projects by team. PDF icon building_america_fy14projects_team.pdf More Documents & Publications Building America FY14 Projects by Building Type

  3. Rocky Mountain Research Station and LANL build

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    tech tool predicts fire behavior in bark beetle-ravaged forests August 9, 2012 Rocky Mountain Research Station and LANL build better computer models LOS ALAMOS, N. M. and FORT COLLINS, CO., August 9, 2012-Fire fighters facing fast-moving wildfires need better tools to predict erratic fire behavior, especially in forests with dead trees caused by massive outbreaks of bark beetles whose predations create an abundance of dead fuel and changes in the tree canopy structure. Tools typically available

  4. Low Energy Ion Implantationin Semiconductor Manufacturing | U...

    Office of Science (SC) Website

    Low Energy Ion Implantation in Semiconductor Manufacturing Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Applications of Nuclear Science ...

  5. Building America Webinar: Building America: Research for Real-World Results

    Energy Savers [EERE]

    | Department of Energy America: Research for Real-World Results Building America Webinar: Building America: Research for Real-World Results For 20 years, the U.S. Department of Energy's (DOE) Building America program has been a source of innovations for high performance homes. This webinar on December 17, 2014, featured Eric Werling, Building America Program Coordinator, providing an overview of key Building America accomplishments, current research focus areas, and future strategies for

  6. Research & Development Needs for Building-Integrated Solar Technologies |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Needs for Building-Integrated Solar Technologies Research & Development Needs for Building-Integrated Solar Technologies The Building Technologies Office (BTO) has identified Building Integrated Solar Technologies (BIST) as a potentially valuable piece of the comprehensive pathway to help achieve its goal of reducing energy consumption in residential and commercial buildings by 50% by the year 2030. This report helps to identify the key research and development

  7. The Building Research Council at the University of Illinois ...

    Open Energy Info (EERE)

    Research Council at the University of Illinois Jump to: navigation, search Name: The Building Research Council at the University of Illinois Place: Champaign, IL Information About...

  8. Industry Research and Recommendations for New Commercial Buildings

    SciTech Connect (OSTI)

    Hendron, B.; Leach, M.; Gregory, N.; Pless, S.; Selkowitz, S.; Matthew, P.

    2014-05-01

    Researchers evaluated industry needs and developed logic models to support possible future commercial new construction research and deployment efforts that could be led or supported by DOE's Commercial Building Integration program or other national initiatives. The authors believe that these recommendations support a proposed course of action from the current state of commercial building energy efficiency to a possible long-term goal of achieving significant market penetration of cost-effective NZE buildings in all building sectors and climates by 2030.

  9. NREL: Wind Research - Building 251 and High Bay

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building 251 and High Bay Photo of an aerial shot of a large blue and grey building with parking lot and cars in the foreground. Building 251 at the NWTC houses administrative and research support offices and well as a high bay for testing wind turbine components. Building 251 is the hub of the National Wind Technology Center. In addition to housing administrative and research support offices, the facility's conference rooms enable NREL to host international wind power specialists, conferences,

  10. Research and Development Roadmap: Windows and Building Envelope |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy and Development Roadmap: Windows and Building Envelope Research and Development Roadmap: Windows and Building Envelope Cover of windows and envelope report, depicting a house, storefront, and multiple office windows. This Building Technologies Office (BTO) Research and Development (R&D) Roadmap identifies priority windows and building envelope R&D areas of interest. Cost and performance targets are identified for each key R&D area. The roadmap describes the

  11. NREL: Buildings Research - Working With Us

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Working With Us NREL's award-winning work with the commercial and public sectors to improve building energy performance is central to its mission. Learn about our awards. At NREL, industry, universities, and government agencies have many opportunities to take advantage of our residential and commercial buildings expertise. Here's how you can work with us to improve the energy efficiency of your buildings. Partner with Us You can work with our experts and use NREL's outstanding facilities and

  12. NREL: Buildings Research - BESTEST-EX

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BESTEST-EX The Building Energy Simulation Test for Existing Homes (BESTEST-EX) is a method for testing home energy audit software and associated calibration methods. BESTEST-EX is one of the tools supporting energy analysis software development, created by NREL on behalf of the U.S. Department of Energy (DOE). Background Residential buildings in the United States accounted for about 22% of national annual primary energy consumption in 2008, according to DOE's Buildings Energy Data Book. Reducing

  13. Building America Systems Integration Research Annual Report:...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Building America Whole-House Savings Targets With the 2012 and 2015 International Energy Conservation Code Residential Energy Code Updates ...... 37 ...

  14. Building America Research Planning Meeting: November 2010

    Broader source: Energy.gov [DOE]

    On this page, you may link to the summary report and presentations for the Building America Planning meeting in November 2010, held in Washington, D.C.

  15. Building America Expert Meeting: Foundations Research Results | Department

    Energy Savers [EERE]

    of Energy Foundations Research Results Building America Expert Meeting: Foundations Research Results The NorthernSTAR Building America Partnership held an expert meeting on Foundations Research Results on November 15, 2011 at the University Hotel Minneapolis on the campus of the University of Minnesota in Minneapolis. Featured speakers included Pat Huelman of the University of Minnesota, Louise Goldberg of the University of Minnesota, Kohta Ueno of Building Science Corporation (BSC), and

  16. Building America Webinar: Advanced Envelope Research for Factory...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    conducted on December 14, 2011, by the ARIES Collaborative, a U.S. Department of Energy Building America research team. File webinaradvancedenvelope20111214.wmv More Documents...

  17. Building America Research Teams: Spotlight on Home Innovation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    a design methodology for analysis of walls with exterior rigid foam sheathing under wind pressure loading to improve disaster resistance. This research led to a Building ...

  18. Building America Research Benchmark Definition, Updated December 2009

    SciTech Connect (OSTI)

    Hendron, Robert; Engebrecht, Cheryn

    2010-01-01

    To track progress toward aggressive multi-year, whole-house energy savings goals of 40%70% and on-site power production of up to 30%, the U.S. Department of Energy (DOE) Residential Buildings Program and the National Renewable Energy Laboratory (NREL) developed the Building America (BA) Research Benchmark in consultation with the Building America industry teams.

  19. Building America Webinar: Building America: Research for Real-World Results

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy America: Research for Real-World Results Building America Webinar: Building America: Research for Real-World Results This presentation was delivered on Dec. 17, 2014, by Eric Werling, Building America Research Coordinator. PDF icon ba_webinar_werling_12-17-14.pdf More Documents & Publications Zero Energy Ready Home Training Presentation DOE ZERH Webinar: High-Performance Home Sales Training, Part I DOE ZERH Webinar: Technical Resources for Marketing and Selling

  20. Assessment of the Potential to Achieve very Low Energy Use in Public Buildings in China with Advanced Window and Shading Systems

    SciTech Connect (OSTI)

    Lee, Eleanor; Pang, Xiufeng; McNeil, Andrew; Hoffmann, Sabine; Thanachareonkit, Anothai; Li, Zhengrong; Ding, Yong

    2015-05-29

    As rapid growth in the construction industry continues to occur in China, the increased demand for a higher standard living is driving significant growth in energy use and demand across the country. Building codes and standards have been implemented to head off this trend, tightening prescriptive requirements for fenestration component measures using methods similar to the U.S. model energy code American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) 90.1. The objective of this study is to (a) provide an overview of applicable code requirements and current efforts within China to enable characterization and comparison of window and shading products, and (b) quantify the load reduction and energy savings potential of several key advanced window and shading systems, given the divergent views on how space conditioning requirements will be met in the future. System-level heating and cooling loads and energy use performance were evaluated for a code-compliant large office building using the EnergyPlus building energy simulation program. Commercially-available, highly-insulating, low-emittance windows were found to produce 24%–66% lower perimeter zone HVAC electricity use compared to the mandated energy-efficiency standard in force (GB 50189-2005) in cold climates like Beijing. Low-e windows with operable exterior shading produced up to 30%–80% reductions in perimeter zone HVAC electricity use in Beijing and 18%–38% reductions in Shanghai compared to the standard. The economic context of China is unique since the cost of labor and materials for the building industry is so low. Broad deployment of these commercially available technologies with the proper supporting infrastructure for design, specification, and verification in the field would enable significant reductions in energy use and greenhouse gas emissions in the near term.

  1. Assessment of the Potential to Achieve very Low Energy Use in Public Buildings in China with Advanced Window and Shading Systems

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Lee, Eleanor; Pang, Xiufeng; McNeil, Andrew; Hoffmann, Sabine; Thanachareonkit, Anothai; Li, Zhengrong; Ding, Yong

    2015-05-29

    As rapid growth in the construction industry continues to occur in China, the increased demand for a higher standard living is driving significant growth in energy use and demand across the country. Building codes and standards have been implemented to head off this trend, tightening prescriptive requirements for fenestration component measures using methods similar to the U.S. model energy code American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) 90.1. The objective of this study is to (a) provide an overview of applicable code requirements and current efforts within China to enable characterization and comparison of window and shading products,more » and (b) quantify the load reduction and energy savings potential of several key advanced window and shading systems, given the divergent views on how space conditioning requirements will be met in the future. System-level heating and cooling loads and energy use performance were evaluated for a code-compliant large office building using the EnergyPlus building energy simulation program. Commercially-available, highly-insulating, low-emittance windows were found to produce 24%–66% lower perimeter zone HVAC electricity use compared to the mandated energy-efficiency standard in force (GB 50189-2005) in cold climates like Beijing. Low-e windows with operable exterior shading produced up to 30%–80% reductions in perimeter zone HVAC electricity use in Beijing and 18%–38% reductions in Shanghai compared to the standard. The economic context of China is unique since the cost of labor and materials for the building industry is so low. Broad deployment of these commercially available technologies with the proper supporting infrastructure for design, specification, and verification in the field would enable significant reductions in energy use and greenhouse gas emissions in the near term.« less

  2. NREL: Buildings Research - News Release Archives

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9 November 9, 2009 New Recovery Through Retrofit Plan Expands Residential Funding Opportunities The new Recovery Through Retrofit Plan will broaden opportunities for residential building projects. Archives Current News | 2006

  3. SIBYLS Beamline Builds on Nobel Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Modrich used to build on his earlier work. DNA repair machinery impacts both why cancer occurs and how it is treated-the primary focus of LBNL's SBDR funding. This year's...

  4. Advanced Ground Source Heat Pump Technology for Very-Low-Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ground Source Heat Pump Technology for Very-Low-Energy Buildings Advanced Ground Source Heat Pump Technology for Very-Low-Energy Buildings Three newunder-utilized ground loop ...

  5. Building America Webinar: Advanced Envelope Research for Factory-Built

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Housing | Department of Energy Advanced Envelope Research for Factory-Built Housing Building America Webinar: Advanced Envelope Research for Factory-Built Housing This webinar was conducted on December 14, 2011, by the ARIES Collaborative, a U.S. Department of Energy Building America research team. File webinar_advanced_envelope_20111214.wmv More Documents & Publications Advanced Envelope Research for Factory-Built Housing ARIES lab houses. Photo courtesy of The Levy Partnership, Inc.

  6. Building America Residential Energy Efficiency Research Planning Meeting:

    Energy Savers [EERE]

    October 2011 | Department of Energy Research Planning Meeting: October 2011 Building America Residential Energy Efficiency Research Planning Meeting: October 2011 On this page, you may link to the summary report and presentations for the Building America Research Planning meeting in October 2011, held in Washington, D.C. PDF icon Residential Energy Efficiency Planning Meeting Summary Report More Documents & Publications Residential Energy Efficiency Research Planning Meeting Summary

  7. Low Energy Neutrino Oscillations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Low Energy Neutrino Oscillations Žarko Pavlović Los Alamos National Laboratory APS April Meeting, May 1 2011 Standard Model & Neutrino Oscillations ● 3 neutrinos ● Initially assumed massless ● Mixing matrix: ● Oscillation Probability:   e      =  U e1 U e2 U e3 U 1 U 2 U 3 U  1 U  2 U  3    1  2  3  Neutrino Oscillations ● Lot of experimental evidence ● L/E dependence ● Precise measurement of atmospheric and solar

  8. Building America Research Teams: Spotlight on Home Innovation and PARR |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Spotlight on Home Innovation and PARR Building America Research Teams: Spotlight on Home Innovation and PARR April 9, 2015 - 10:55am Addthis This article continues our series of profiles about the Building America research teams-multidisciplinary industry partnerships that work to make high performance homes a reality for all Americans. This month's article focuses on Partnership for Home Innovation and Partnership for Advanced Residential Retrofits-leaders in research

  9. Research Support Facility (RSF): Leadership in Building Performance (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-09-01

    This brochure/poster provides information on the features of the Research Support Facility including a detailed illustration of the facility with call outs of energy efficiency and renewable energy technologies. Imagine an office building so energy efficient that its occupants consume only the amount of energy generated by renewable power on the building site. The building, the Research Support Facility (RSF) occupied by the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) employees, uses 50% less energy than if it were built to current commercial code and achieves the U.S. Green Building Council's Leadership in Energy and Environmental Design (LEED{reg_sign}) Platinum rating. With 19% of the primary energy in the U.S. consumed by commercial buildings, the RSF is changing the way commercial office buildings are designed and built.

  10. Building America Research Benchmark Definition, Updated December 19, 2008

    SciTech Connect (OSTI)

    Hendron, R.

    2008-12-19

    To track progress toward aggressive multi-year whole-house energy savings goals of 40-70% and onsite power production of up to 30%, DOE's Residential Buildings Program and NREL developed the Building America Research Benchmark in consultation with the Bui

  11. Building America Expert Meeting: Foundations Research Results...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    expert meeting on Foundations Research Results on November 15, 2011 at the University Hotel Minneapolis on the campus of the University of Minnesota in Minneapolis. Featured...

  12. Research and Development Needs for Building-Integrated Solar Technologies

    SciTech Connect (OSTI)

    none,

    2014-01-01

    The Building Technologies Office (BTO) has identified Building Integrated Solar Technologies (BIST) as a potentially valuable piece of the comprehensive pathway to help achieve its goal of reducing energy consumption in residential and commercial buildings by 50% by the year 2030. This report helps to identify the key research and development (R&D) needs that will be required for BIST to make a substantial contribution toward that goal. BIST include technologies for space heating and cooling, water heating, hybrid photovoltaic-thermal systems (PV/T), active solar lighting, and building-integrated photovoltaics (BIPV).

  13. Research Support Facility - Zero Energy Building Moves Closer to Reality

    SciTech Connect (OSTI)

    2010-04-01

    The DOE's Research Support Facility showcases high-performance design features, passive energy strategies, and renewable energy. It is a prototype for future large-scale net-zero energy buildings.

  14. ORNL Researchers Study Market Entry Challenges for Building Envelope

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Retrofit Product | Department of Energy ORNL Researchers Study Market Entry Challenges for Building Envelope Retrofit Product ORNL Researchers Study Market Entry Challenges for Building Envelope Retrofit Product December 9, 2015 - 10:06am Addthis DOE laboratories that are participating in the Lab-Corps pilot program have assembled entrepreneurial teams to identify private sector opportunities for commercializing promising sustainable energy technologies. Each Lab-Corps team has its own

  15. NREL To Build Research Support Facility - News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    To Build Research Support Facility April 19, 2006 Golden, Colo. - The U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) today issued a request for proposals for design and construction of a state-of-the-art office building for the laboratory's South Table Mountain campus in Golden, Colo. NREL's vision is to design and build 210,000 square feet of research support facilities that would house approximately 780 staff who currently work in leased space at the Denver West

  16. Building Connections with State Researchers | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Connections with State Researchers Building Connections with State Researchers March 11, 2013 - 11:22am Addthis Assistant Secretary Chris Smith meets with UT undergraduate students studying geological research. | Photo by David M. Stephens, The University of Texas at Austin. Assistant Secretary Chris Smith meets with UT undergraduate students studying geological research. | Photo by David M. Stephens, The University of Texas at Austin. Gayland Barksdale Technical Writer, Office of Fossil Energy

  17. Extreme dynamic compression with a low energy laser pulse (Conference...

    Office of Scientific and Technical Information (OSTI)

    at: Extreme dynamic compression with a low energy laser pulse, Tampa, FL, United States, Jun 15 - Jun 19, 2015 Research Org: Lawrence Livermore National Laboratory (LLNL),...

  18. Building America Expert Meeting: Advanced Envelope Research for Factory

    Energy Savers [EERE]

    Built Housing | Department of Energy Advanced Envelope Research for Factory Built Housing Building America Expert Meeting: Advanced Envelope Research for Factory Built Housing This report provides information about the expert meeting on advanced envelope research for factory built housing, hosted by the ARIES Collaborative on October 11, 2011, in Phoenix, Arizona. The goals of this meeting were to provide a comprehensive solution to the use of three previously selected advanced alternatives

  19. What is a low-energy house and who cares?

    SciTech Connect (OSTI)

    Litt, B.R.

    1994-12-01

    Most energy analysts view low-energy houses as good things, yet differ in their expectations of what exactly a low energy house is. There are two intertwining threads to this report. The first is an evaluation of 50 buildings that have been claimed to be low-energy residences, for which monitored energy performance data have been collected. These data represent the preliminary effort in the ongoing update of the Buildings Energy-Use Compilation and Analysis (BECA) data base for new residences. The second thread concerns the definition of a low-energy house. After the elements of a definition are presented, their implications for actors involved in providing housing are identified. Several more tractable definitions are applied to the houses in this compilation. The outcomes illustrate ways in which different interests are served by various definitions. Different definitions can yield very different energy rankings. No single definition of a low-energy house is universally applicable.

  20. Building America Research Benchmark Definition, Updated December 15, 2006

    SciTech Connect (OSTI)

    Hendron, R.

    2007-01-01

    To track progress toward aggressive multi-year whole-house energy savings goals of 40-70% and onsite power production of up to 30%, DOE's Residential Buildings Program and NREL developed the Building America Research Benchmark in consultation with the Building America industry teams. The Benchmark is generally consistent with mid-1990s standard practice, as reflected in the Home Energy Rating System (HERS) Technical Guidelines (RESNET 2002), with additional definitions that allow the analyst to evaluate all residential end-uses, an extension of the traditional HERS rating approach that focuses on space conditioning and hot water. Unlike the reference homes used for HERS, EnergyStar, and most energy codes, the Benchmark represents typical construction at a fixed point in time so it can be used as the basis for Building America's multi-year energy savings goals without the complication of chasing a ''moving target''.

  1. Studies in Low-Energy Nuclear Science

    SciTech Connect (OSTI)

    Carl R. Brune; Steven M. Grimes

    2010-01-13

    This report presents a summary of research projects in the area of low energy nuclear reactions and structure, carried out between March 1, 2006 and October 31, 2009 which were supported by U.S. DOE grant number DE-FG52-06NA26187.

  2. Low Energy Electrodynamics in Solids (LEES) 2012

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Low Energy Electrodynamics in Solids (LEES) 2012 Low Energy Electrodynamics in Solids (LEES) 2012 July 22-27, 2012; Napa

  3. Low Energy Electrodynamics in Solids (LEES) 2012

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Low Energy Electrodynamics in Solids (LEES) 2012 Low Energy Electrodynamics in Solids (LEES) 2012 July 22-27, 2012; Napa...

  4. Building America … ORNL R&D: HVAC Research

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America - ORNL R&D: HVAC Research 2015 Building Technologies Office Peer Review Jeffrey Munk, munkjd@ornl.gov Oak Ridge National Laboratory Philip Boudreaux, Roderick Jackson, Wale Odukomaiya Project Summary Timeline: Start date: 10/1/2013 Planned end date: 9/30/2014 Key Milestones 1. Heating Performance Curves; 4/15/2014 2. Cooling Performance Curves; 7/15/2014 3. Final Report w/Sizing Guidelines; 2/28/2015 Budget: Total DOE $ to date: $200k Total future DOE $: $ 0 Target

  5. Low Energy Ion Implantationin Semiconductor Manufacturing | U.S. DOE Office

    Office of Science (SC) Website

    of Science (SC) Low Energy Ion Implantation in Semiconductor Manufacturing Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Applications of Nuclear Science Applications of Nuclear Science Archives Small Business Innovation / Technology Transfer Funding Opportunities Nuclear Science Advisory Committee (NSAC) Community Resources Contact Information Nuclear Physics U.S. Department of Energy SC-26/Germantown Building 1000 Independence Ave., SW Washington,

  6. Commercial Building Energy Asset Rating Program -- Market Research

    SciTech Connect (OSTI)

    McCabe, Molly J.; Wang, Na

    2012-04-19

    Under contract to Pacific Northwest National Laboratory, HaydenTanner, LLC conducted an in-depth analysis of the potential market value of a commercial building energy asset rating program for the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy. The market research objectives were to: (1) Evaluate market interest and need for a program and tool to offer asset rating and rapidly identify potential energy efficiency measures for the commercial building sector. (2) Identify key input variables and asset rating outputs that would facilitate increased investment in energy efficiency. (3) Assess best practices and lessons learned from existing national and international energy rating programs. (4) Identify core messaging to motivate owners, investors, financiers, and others in the real estate sector to adopt a voluntary asset rating program and, as a consequence, deploy high-performance strategies and technologies across new and existing buildings. (5) Identify leverage factors and incentives that facilitate increased investment in these buildings. To meet these objectives, work consisted of a review of the relevant literature, examination of existing and emergent asset and operational rating systems, interviews with industry stakeholders, and an evaluation of the value implication of an asset label on asset valuation. This report documents the analysis methodology and findings, conclusion, and recommendations. Its intent is to support and inform the DOE Office of Energy Efficiency and Renewable Energy on the market need and potential value impacts of an asset labeling and diagnostic tool to encourage high-performance new buildings and building efficiency retrofit projects.

  7. Researching Complex Heat, Air and Moisture Interactions for a Wide-Range of Building Envelope Systems and Environmental Loads

    SciTech Connect (OSTI)

    Karagiozis, A.N.

    2007-05-15

    This document serves as the final report documenting work completed by Oak Ridge National Laboratory (ORNL) and the Fraunhofer Institute in Building Physics (Holzkirchen, Germany) under an international CRADA No. 0575 with Fraunhofer Institute of Bauphysics of the Federal Republic of Germany for Researching Complex Heat, Air and Moisture Interactions for a Wide Range of Building Envelope Systems and Environmental Loads. This CRADA required a multi-faceted approach to building envelope research that included a moisture engineering approach by blending extensive material property analysis, laboratory system and sub-system thermal and moisture testing, and advanced moisture analysis prediction performance. The Participant's Institute for Building physics (IBP) and the Contractor's Buildings Technology Center (BTC) identified potential research projects and activities capable of accelerating and advancing the development of innovative, low energy and durable building envelope systems in diverse climates. This allowed a major leverage of the limited resources available to ORNL to execute the required Department of Energy (DOE) directives in the area of moisture engineering. A joint working group (ORNL and Fraunhofer IBP) was assembled and a research plan was executed from May 2000 to May 2005. A number of key deliverables were produced such as adoption of North American loading into the WUFI-software. in addition the ORNL Weather File Analyzer was created and this has been used to address environmental loading for a variety of US climates. At least 4 papers have been co-written with the CRADA partners, and a chapter in the ASTM Manual 40 on Moisture Analysis and Condensation Control. All deliverables and goals were met and exceeded making this collaboration a success to all parties involves.

  8. Text-Alternative Version of Building America Webinar: Research for Real-World Results

    Broader source: Energy.gov [DOE]

    This webinar, held on Dec. 17, 2014, featured Eric Werling, Building America Program Coordinator, providing an overview of key Building America accomplishments, current research focus areas, and future strategies for advancing market adoption of energy efficient building technologies and practices.

  9. ORNL Researchers Study Market Entry Challenges for Building Envelope...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    sector opportunities for commercializing promising sustainable energy technologies. ... potential of a building envelope retrofit system for commercial buildings. ...

  10. Building America Program Research-to-Market Plan | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Program Research-to-Market Plan Building America Program Research-to-Market Plan This report presents the Building America Research-to-Market Plan (Plan), including the integrated Building America Technology-to-Market Roadmaps (Roadmaps) that will guide Building America's research, development, and deployment (RD&D) activities over the coming years. The Plan and Roadmaps will be updated as necessary to adapt to research findings and evolving stakeholder needs, and they will reflect input

  11. Building America Special Research Project: High-R Walls Case Study Analysis

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    building science.com © 2009 Building Science Press All rights of reproduction in any form reserved. Building America Special Research Project: High-R Walls Case Study Analysis Research Report - 0903 March 11, 2009 (Rev. June 8, 2011) John Straube and Jonathan Smegal Abstract: Many concerns, including the rising cost of energy, climate change concerns, and demands for increased comfort, have lead to the desire for increased insulation levels in many new and existing buildings. More building

  12. NREL: Buildings Research - BuildingSync Schema for Energy Audit Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BuildingSync® Schema for Energy Audit Data BuildingSync Implementation Guide BuildingSync® is a standardized language for commercial building energy audit data that software developers can use to exchange data between audit tools. Taking the form of an XML schema, BuildingSync can be required by building owners and audit program managers to allow data analysis and aggregation across multiple buildings in order to evaluate program performance and analyze trends. BuildingSync was developed by a

  13. Building America: Research for Real-World Results

    Broader source: Energy.gov [DOE]

    For 20 years, the U.S. Department of Energy’s Building America program has been a source of innovations for high performance homes. Join Eric Werling, Building America Program Coordinator, and Sam...

  14. Low energy demonstration accelerator technical area 53

    SciTech Connect (OSTI)

    1996-04-01

    As part of the Department of Energy`s (DOE) need to maintain the capability of producing tritium in support of its historic and near-term stewardship of the nation`s nuclear weapons stockpile, the agency has recently completed a Programmatic Environmental Impact Statement for Tritium Supply and Recycling. The resulting Record of Decision (ROD) determined that over the next three years the DOE would follow a dual-track acquisition strategy that assures tritium production for the nuclear weapon stockpile in a rapid, cost effective, and safe manner. Under this strategy the DOE will further investigate and compare two options for producing tritium: (1) purchase of an existing commercial light-water reactor or irradiation services with an option to purchase the reactor for conversion to a defense facility; and (2) design, build, and test critical components of a system for accelerator production of tritium (APT). The final decision to select the primary production option will be made by the Secretary of Energy in the October 1998 time frame. The alternative not chosen as the primary production method, if feasible, would be developed as a back-up tritium supply source. This Environmental Assessment (EA) analyzes the potential environmental effects that would be expected to occur if the DOE were to design, build, and test critical prototypical components of the accelerator system for tritium production, specifically the front-end low-energy section of the accelerator, at Los Alamos National Laboratory. The Low Energy Demonstration Accelerator (LEDA) would be incrementally developed and tested in five separate stages over the next seven years. The following issues were evaluated for the proposed action: utility demands, air, human health, environmental restoration, waste management, transportation, water, threatened and endangered species, wetlands, cultural resources, and environmental justice.

  15. Opportunities for Building America Research to Address Energy Upgrade Technical Challenges: HVAC, Envelope & IAQ (301)

    Energy Savers [EERE]

    Better Buildings Residential Network Peer Exchange Call Series: Opportunities for Building America Research to Address Energy Upgrade Technical Challenges: HVAC, Envelope & IAQ (301) July 21, 2015 Call Slides and Discussion Summary Agenda  Call Logistics and Introductions  Opening Polls  Residential Network and Peer Exchange Call Overview  Introduction to Building America Technology to Market Roadmaps  Eric Werling, Building America Program Director, DOE Building Technologies

  16. Buildings of the Future Research Project Launch and Virtual Panel Discussion on Building Technology Trends

    Broader source: Energy.gov [DOE]

    Learn more about the DOE's Buildings of the Future Project. Buildings will no longer be passive objects that consume resources, but rather active participants engaged in the energy system and our community.

  17. Building America Webinar: Building America: Research for Real-World Results

    Broader source: Energy.gov [DOE]

    For 20 years, the U.S. Department of Energy’s (DOE) Building America program has been a source of innovations for high performance homes. Join Eric Werling, Building America Program Coordinator,...

  18. Opportunities for Building America Research to Address Energy Upgrade Technical Challenges: HVAC, Envelope and IAQ (301)

    Broader source: Energy.gov [DOE]

    Better Buildings Residential Network Peer Exchange Call Series: Opportunities for Building America Research to Address Energy Upgrade Technical Challenges: HVAC, Envelope and IAQ (301), call slides and discussion summary.

  19. Building America Systems Integration Research Annual Report: FY 2012

    SciTech Connect (OSTI)

    Gestwick, M.

    2013-05-01

    This document is the Building America FY2012 Annual Report, which includes an overview of the Building America Program activities and the work completed by the National Renewable Energy Laboratory and the Building America industry consortia (the Building America teams). The annual report summarizes major technical accomplishments and progress towards U.S. Department of Energy Building Technologies Program's multi-year goal of developing the systems innovations that enable risk-free, cost effective, reliable and durable efficiency solutions that reduce energy use by 30%-50% in both new and existing homes.

  20. Building America Systems Integration Research Annual Report. FY 2012

    SciTech Connect (OSTI)

    Gestwick, Michael

    2013-05-01

    This Building America FY2012 Annual Report includes an overview of the Building America Program activities and the work completed by the National Renewable Energy Laboratory and the Building America industry consortia (the Building America teams). The annual report summarizes major technical accomplishments and progress towards U.S. Department of Energy Building Technologies Program's multi-year goal of developing the systems innovations that enable risk-free, cost effective, reliable and durable efficiency solutions that reduce energy use by 30%-50% in both new and existing homes.

  1. Addressing Kitchen Contaminants for Healthy, Low-Energy Homes

    SciTech Connect (OSTI)

    Stratton, J. Chris; Singer, Brett C.

    2014-01-01

    Cooking and cooking burners emit pollutants that can adversely affect indoor air quality in residences and significantly impact occupant health. Effective kitchen exhaust ventilation can reduce exposure to cooking-related air pollutants as an enabling step to healthier, low-energy homes. This report by Lawrence Berkeley National Laboratory identifies barriers to the widespread adoption of kitchen exhaust ventilation technologies and practice and proposes a suite of strategies to overcome these barriers. The recommendations have been vetted by a group of industry, regulatory, health, and research experts and stakeholders who convened for two meetings and provided input and feedback to early drafts of this document. The most fundamental barriers are (1) the common misconception, based on a sensory perception of risk, that kitchen exhaust when cooking is unnecessary and (2) the lack of a code requirement for kitchen ventilation in most U.S. locations. Highest priority objectives include the following: (1) Raise awareness among the public and the building industry of the need to install and routinely use kitchen ventilation; (2) Incorporate kitchen exhaust ventilation as a requirement of building codes and improve the mechanisms for code enforcement; (3) Provide best practice product and use-behavior guidance to ventilation equipment purchasers and installers, and; (4) Develop test methods and performance targets to advance development of high performance products. A specific, urgent need is the development of an over-the-range microwave that meets the airflow and sound requirements of ASHRAE Standard 62.2.

  2. Addressing Kitchen Contaminants for Healthy, Low-Energy Homes

    SciTech Connect (OSTI)

    Stratton, J. Chris; Singer, Brett C.

    2014-01-01

    Cooking and cooking burners emit pollutants that can adversely affect indoor air quality in residences and significantly impact occupant health. Effective kitchen exhaust ventilation can reduce exposure to cooking-related air pollutants as an enabling step to healthier, low-energy homes. This report identifies barriers to the widespread adoption of kitchen exhaust ventilation technologies and practice and proposes a suite of strategies to overcome these barriers. The recommendations have been vetted by a group of industry, regulatory, health, and research experts and stakeholders who convened for two web-based meetings and provided input and feedback to early drafts of this document. The most fundamental barriers are (1) the common misconception, based on a sensory perception of risk, that kitchen exhaust when cooking is unnecessary and (2) the lack of a code requirement for kitchen ventilation in most US locations. Highest priority objectives include the following: (1) Raise awareness among the public and the building industry of the need to install and routinely use kitchen ventilation; (2) Incorporate kitchen exhaust ventilation as a requirement of building codes and improve the mechanisms for code enforcement; (3) Provide best practice product and use-behavior guidance to ventilation equipment purchasers and installers, and; (4) Develop test methods and performance targets to advance development of high performance products. A specific, urgent need is the development of an over-the-range microwave that meets the airflow and sound requirements of ASHRAE Standard 62.2.

  3. Code Gaps and Future Research Needs of Combustion Safety: Building America

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Expert Meeting Update | Department of Energy Code Gaps and Future Research Needs of Combustion Safety: Building America Expert Meeting Update Code Gaps and Future Research Needs of Combustion Safety: Building America Expert Meeting Update This presentation was delivered at the U.S. Department of Energy Building America Technical Update meeting on April 29-30, 2013, in Denver, Colorado. PDF icon code_gaps_combustion_safety.pdf More Documents & Publications Building America Expert Meeting:

  4. 2015 BTO Peer Review Presentation - Chinese New Commercial Building

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Standard | Department of Energy BTO Peer Review Presentation - Chinese New Commercial Building Energy Standard 2015 BTO Peer Review Presentation - Chinese New Commercial Building Energy Standard Presenter: Mark Levine, LBNL View the Presentation PDF icon 2015 BTO Peer Review Presentation - Chinese New Commercial Building Energy Standard More Documents & Publications Research on Very Low-Energy Building Operations and Management Methods The new building wing of the Saint-Gobain

  5. LOW ENERGY RECIRCULATOR FACILITY | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LERF Contact top-right bottom-left-corner bottom-right-corner Low Energy Recirculator Facility (LERF) Jefferson Lab's Low Energy Recirculator Facility, formerly known as the Free-E...

  6. Research & Development Needs for Building-Integrated Solar Technologie...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    systems (PVT), active solar lighting, and building-integrated photovoltaics (BIPV). ... More Documents & Publications Impact of Solar PV Laminate Membrane Systems on Roofs Energy ...

  7. New Construction Jobs Begin as Argonne Builds New Energy Research...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    available. Designed to be a Leadership in Energy and Environmental Design (LEED) Gold building, the facility will utilize a daylighting design, local and recycled materials, ...

  8. Building America Research Teams: Spotlight on ARIES and NorthernSTAR |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Research Teams: Spotlight on ARIES and NorthernSTAR Building America Research Teams: Spotlight on ARIES and NorthernSTAR May 14, 2015 - 12:36pm Addthis This article continues our series of profiles about the Building America research teams-multidisciplinary industry partnerships that work to make high performance homes a reality for all Americans. This month's article focuses on Advanced Residential Integrated Energy Solutions and NorthernSTAR Building America

  9. Building Technologies Program Multi-Year Program Plan Research and Development 2008

    SciTech Connect (OSTI)

    None, None

    2008-01-01

    Building Technologies Program Multi-Year Program Plan 2008 for research and development, including residential and commercial integration, lighting, HVAC and water heating, envelope, windows, and analysis tools.

  10. Design-Build Process for the Research Support Facility (RSF) (Book)

    SciTech Connect (OSTI)

    Not Available

    2012-06-01

    An in-depth look at how the U.S. DOE and NREL used a performance-based design-build contract to build the Research Support Facility (RSF); one of the most energy efficient office buildings in the world.

  11. Building America Research Benchmark Definition: Updated December 2009

    SciTech Connect (OSTI)

    Hendron, R.; Engebrecht, C.

    2010-01-01

    The Benchmark represents typical construction at a fixed point in time so it can be used as the basis for Building America's multi-year energy savings goals without chasing a 'moving target.'

  12. Building America Special Research Project: High-R Walls Case Study Analysis

    Office of Environmental Management (EM)

    | Department of Energy Building America Special Research Project: High-R Walls Case Study Analysis Building America Special Research Project: High-R Walls Case Study Analysis This report considers a number of promising wall systems with improved thermal control to improve plant-wide performance. Unlike previous studies, it considers performance in a more realistic matter, including some true three-dimensional heat flow and the relative risk of moisture damage. PDF icon Building America

  13. US India Joint Center for Building Energy Research and Development (CBERD)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    US India Joint Center for Building Energy Research and Development (CBERD) Monitoring and Benchmarking 2014 Building Technologies Office Peer Review CBERD promotes innovation in energy efficiency through collaborative research, contributing to significant reduction in building energy use in both nations. Reshma Singh, LEED AP; ReshmaSingh@lbl.gov Lawrence Berkeley National Laboratory (LBNL) 2 Project Summary Timeline: Start date: Oct 2012; Planned end date: Sep 2017 Key Milestones 1. Sample

  14. Building America Research Teams: BA-PIRC and IBACOS-Pioneers in

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Homebuilding Innovation | Department of Energy BA-PIRC and IBACOS-Pioneers in Homebuilding Innovation Building America Research Teams: BA-PIRC and IBACOS-Pioneers in Homebuilding Innovation March 12, 2015 - 10:56am Addthis This article continues our series of profiles about the Building America research teams-multidisciplinary industry partnerships that work to make high performance homes a reality for all Americans. This month's article focuses on two long-standing Building America

  15. Building America Research Teams: BSC and CARB-20 Years of Advancing High

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Performance Homes | Department of Energy BSC and CARB-20 Years of Advancing High Performance Homes Building America Research Teams: BSC and CARB-20 Years of Advancing High Performance Homes February 11, 2015 - 5:12pm Addthis In this article, we continue our series of profiles on the Building America research teams-multidisciplinary industry partnerships who work to make high performance homes a reality for all Americans. This month focuses on two of the long-lived Building America

  16. Building America System Research Results. Innovations for High Performance Homes

    SciTech Connect (OSTI)

    none,

    2006-05-01

    This report provides a summary of key lessons learned from the first 10 years of the Building America program and also included a summary of the future challenges that must be met to reach the programs long term performance goals.

  17. Experimental plan for investigating building-earth heat transfer at the Joint Institute for Heavy Ion Research Building

    SciTech Connect (OSTI)

    Childs, K.W.

    1980-11-01

    An experimental plan is presented for investigating heat transfer between below-grade portions of building envelopes and the surrounding soil. Included is a detailing of data to be collected at an earth-sheltered structure (Joint Institute for Heavy Ion Research Building) to be constructed at Oak Ridge National Laboratory. The attributes of the required data collection instrumentation are defined and a program to assure the accuracy of the collected data is discussed. The experimental plan is intended to be used as a guide to selection, installation, and maintenance of instrumentation as well as in data collection and verification.

  18. Research and Development Needs for Building-Integrated Solar Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    & Development Needs for Building-Integrated Solar Technologies January 2014 NOTICE This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government, nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information,

  19. Building America FY14 Project Matrix - by Research Team

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ARBI (DEG) Ducts in Condioned Space & High R-value Wall Measure Research New All Thermal Enclosure All ARBI (DEG) Field Trial of an Aerosol-Based Envelope Sealing Technology on a Production Scale Measure Research Both All Thermal Enclosure All All All All All ARBI (DEG) Reduced Recirculation Losses in Multi-Family Solar Water Heating Applications Measure Research Both MF Efficient Water Heating All ARBI (DEG) Evaluation of HPWH Ducting Kit Benefits in a Hot- Dry Climate Measure Research Both

  20. Building America Expert Meeting: Advanced Envelope Research for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This report provides information about the expert meeting on advanced envelope research for factory built housing, hosted by the ARIES Collaborative on October 11, 2011, in Phoenix...

  1. Building America Research Teams: Spotlight on Alliance for Residential...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... expertise to bridge cool energy house.jpg the gap between research and market integration. ... resulted in the implementation of the Residential Green and Energy Efficiency Addendum. ...

  2. PEV Grid Integration Research: Vehicles, Buildings, and Renewables...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Focus Areas o Managed charging systems providing flexibility, demand response capability o Bi-directional power to minimize local demand charge and grid ...

  3. Research Support Facility - Zero Energy Building Moves Closer to Reality (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-04-01

    The DOE's Research Support Facility showcases high-performance design features, passive energy strategies, and renewable energy. It is a prototype for future large-scale net-zero energy buildings.

  4. Building America Research Teams: BSC and CARB-20 Years of Advancing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BSC and CARB-20 Years of Advancing High Performance Homes Building America Research Teams: BSC and CARB-20 Years of Advancing High Performance Homes February 11, 2015 - 5:12pm ...

  5. Energy Department Announces $5 Million for Residential Building Energy Efficiency Research and University-Industry Partnerships

    Broader source: Energy.gov [DOE]

    The Energy Department today announced a $5 million investment to develop and demonstrate new residential energy efficiency solutions, and that will support building energy efficiency research at universities and colleges.

  6. Buildings

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Superior Energy Performance Policy Interpretation providing a certification pathway for Commercial Buildings May 7, 2015 Question: As a hotel or university campus, can I use the ...

  7. Building

    U.S. Energy Information Administration (EIA) Indexed Site

    DIV. Electricity Consumption and Expenditure Intensities by Census Division, 1999" ,"Electricity Consumption",,,"Electricity Expenditures" ,"per Building (thousand kWh)","per...

  8. U.S.…India Joint Center for Buildings Energy Research and Development (CBERD)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    -India Joint Center for Buildings Energy Research and Development (CBERD): Simulation & Modeling 2014 Building Technologies Office Peer Review CBERD promotes innovation in energy efficiency through collaborative research, contributing to significant reduction in energy use in both nations. Philip Haves, phaves@lbl.gov Lawrence Berkeley National Laboratory Project Summary Timeline: Start date: 10/1/2012 Planned end date: 9/30/2017 Key Milestones 1. Beta version of code compliance tool;

  9. US India Joint Center for Building Energy Research and Development (CBERD) : Controls and Communications Integration

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    US India Joint Center for Building Energy Research and Development (CBERD) : Controls and Communications Integration 2014 Building Technologies Office Peer Review CBERD promotes innovation in energy efficiency through collaborative research, contributing to significant reduction in energy use in both nations. Rich Brown, REBrown@lbl.gov Lawrence Berkeley National Laboratory (LBNL) Project Summary Timeline: Start date: Oct 2012; Planned end date: Sep 2017 Key Milestones Key Partners:

  10. Summary of Prioritized Research Opportunities. Building America Planning Meeting, November 2-4, 2010

    SciTech Connect (OSTI)

    none,

    2011-02-01

    This report outlines the results of brainstorming sessions conducted at the Building America Fall 2010 planning meeting, in which research teams and national laboratories identified key research priorities to incorporate into multi-year planning, team research agendas, expert meetings, and technical standing committees.

  11. The Design-Build Process for the Research Support Facility (RSF), Energy Efficiency & Renewable Energy (EERE)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Design-Build Process for the Research Support Facility An in-depth look at how the U.S. Department of Energy and the National Renewable Energy Laboratory used a performance-based design-build contract process to build one of the most energy efficient office buildings in the world. Table of Contents The Design-Build Process for the Research Support Facility | 1 Table of Contents Executive Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

  12. Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Cold Climates

    SciTech Connect (OSTI)

    Building Industry Research Alliance; Building Science Consortium; Consortium for Advanced Residential Buildings; Florida Solar Energy Center; IBACOS; National Renewable Energy Laboratory

    2006-08-01

    The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in Cold Climates on a cost-neutral basis.

  13. Buildings

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Superior Energy Performance® Policy Interpretation providing a certification pathway for Commercial Buildings May 7, 2015 Question: As a hotel or university campus, can I use the supporting standards and protocols developed for SEP- Industry to apply for SEP certification? Response: The SEP Administrator is providing this interpretation regarding the types of facilities that can be certified to Superior Energy Performance (SEP). Background: A number of owners/operators of buildings and complex

  14. Technology: How to build a low-energy future

    Broader source: Energy.gov [DOE]

    Advanced construction technologies promise huge energy savings, says Philip Farese. Investment is needed to bring them to market and to encourage their use.

  15. Building better microbatteries: from fundamental research to manufacturing

    SciTech Connect (OSTI)

    Xiao, Jie; Deng, Zhiqun; Carlson, Thomas J.; Eppard, Matthew B.

    2014-03-31

    The Endangered Species Act requires actions that improve the passage and survival rates for migrating salmonoids and other fish species that sustain injury and mortality when passing through hydroelectric dams. To develop a low-cost revolutionary acoustic transmitter that may be injected instead of surgically implanted into the fish, one major challenge that needs to be addressed is the micro-battery power source. This work focuses on the design and fabrication of micro-batteries for injectable fish tags. High pulse current and required service life have both been achieved as well as doubling the gravimetric energy density of the battery. The newly designed micro-batteries have intrinsically low impedance, leading to significantly improved electrochemical performances at low temperatures as compared with commercial SR416 batteries. Successful field trial by using the micro-battery powered transmitters injected into fish has been demonstrated, providing an exemplary model of transferring fundamental research into practical devices with controlled qualities.

  16. US India Joint Center for Building Energy Research and Development (CBERD) : Controls and Communications Integration

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    India Joint Center for Building Energy Research and Development (CBERD) : Controls and Communications Integration 2015 Building Technologies Office Peer Review Rich Brown, REBrown@lbl.gov Lawrence Berkeley National Laboratory (LBNL) 2 Project Summary Timeline: Start date: Oct 2012; Planned end date: Sep 2017 Key Milestones 1. Pilot lighting system deployment with open control interface (Fall 2014) 2. Transactional Network Volttron integration (Spring 2016) 3. Demonstrate transaction-based

  17. Proceedings of the International Workshop on Low Energy Muon Science: LEMS`93

    SciTech Connect (OSTI)

    Leon, M.

    1994-01-01

    This report contains papers on research with low energy muons. Topics cover fundamental electroweak physics; muonic atoms and molecules, and muon catalyzed fusion; muon spin research; and muon facilities. These papers have been indexed and cataloged separately.

  18. DOE Commercial Building Energy Asset Rating: Market Research and Program Direction

    SciTech Connect (OSTI)

    Wang, Na; Taylor, Cody; McCabe, Molly J.

    2012-08-12

    This paper presents the development of a voluntary energy asset rating system, to evaluate the physical characteristics and as-built energy efficiency of new and existing commercial buildings. The energy asset rating system is intended to enable commercial building stakeholders to directly compare expected as-built energy performance among similar buildings and to analyze the potential for capital improvements to increase energy efficiency cost-effectively. Market research has been performed to understand the market demand and how to communicate energy and cost savings to owners, investors, financiers, and others to overcome market barriers and motivate capital investment in building energy efficiency. The paper discusses the findings of the market research. Building owners are concerned about redundancy, conflicting requirements, and cost. They also pointed out a data gap and desire a rating program that identifies improvement opportunities. A meaningful linkage between the energy asset rating and other rating systems is essential. Based on the findings, criteria for a successful energy asset rating program have been developed to direct the program design, including validity of ratings, actionable, cost effective recommendations, effective quality control, integration with other rating systems, and necessary training and education. In addition to the rating system, an asset rating tool is being developed to reduce cost and increase standardization, allowing for consistent and reliable comparisons among and between buildings. The asset rating tool is the first step in the process by which owners can enter information about their building structure and receive information on the buildings modeled performance and recommended efficiency measures.

  19. New TCIPG Research Program Builds on Past Successes with Nearly $18.8

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Million DOE Award | Department of Energy TCIPG Research Program Builds on Past Successes with Nearly $18.8 Million DOE Award New TCIPG Research Program Builds on Past Successes with Nearly $18.8 Million DOE Award A new award of nearly $18.8 million over a five-year period from the Department of Energy (DOE) and contributions from the Department of Homeland Security (DHS) will fund the new Trustworthy Cyber Infrastructure for the Power Grid (TCIPG) project, an expanded effort of the current

  20. Ars Technica: Finding Smart Ways to Build Smart Things | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Finding Smart Ways to Build Smart Things Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Ars Technica: Finding Smart Ways to Build Smart Things Ars Technica visited GE's Global Research Center in Munich to discover the innovative research being done at the facility. Watch a video of Ars Technica's visit below: You Might

  1. DOE Announces Webinars on the Buildings of the Future Research Project, O&M

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Best Practices for Small PV Systems, and More | Department of Energy Buildings of the Future Research Project, O&M Best Practices for Small PV Systems, and More DOE Announces Webinars on the Buildings of the Future Research Project, O&M Best Practices for Small PV Systems, and More December 2, 2014 - 5:31pm Addthis EERE offers webinars to the public on a range of subjects, from adopting the latest energy efficiency and renewable energy technologies, to training for the clean energy

  2. New TCIPG Research Program Builds on Past Successes with Nearly $18.8

    Office of Environmental Management (EM)

    Million DOE Award | Department of Energy TCIPG Research Program Builds on Past Successes with Nearly $18.8 Million DOE Award New TCIPG Research Program Builds on Past Successes with Nearly $18.8 Million DOE Award November 25, 2009 - 1:23pm Addthis A new award of nearly $18.8 million over a five-year period from the Department of Energy (DOE) and contributions from the Department of Homeland Security (DHS) will fund the new Trustworthy Cyber Infrastructure for the Power Grid (TCIPG) project,

  3. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    6 FY2003-2005 Green Building R&D, as Share of Federal Budget and by Organization Budget Function National Defense 57.2% | DOE Health 23.1% | EPA Other energy, general science, | NSF natural resources, and environment 8.0% | PIER (1) Space research and technology 6.3% | DOC-NIST Transportation 1.5% | NYSERDA Agriculture 1.5% | HUD Veterans' benefits and services research 0.7% | GSA Green building 0.2% | ASHRAE Other functions (2) 1.6% Total 100% Note(s): Source(s): 3,000 2,400 1) PIER =

  4. Building.

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Plant in ITER refers to plant systems located outside the Tokamak Building. A thick wall of concrete surrounding the main tokamak cryostat and designed to absorb the bulk of any remaining radiation from the plasma or from activated components inside the cryostat. This shields the region outside so that it can be accessed after shutdown for major hands-on repairs. The structure surrounding the plasma in a fusion reactor, within which the fusion-produced neutrons are slowed down, heat is

  5. Tour Brookhaven Lab's Future Hub for Energy Research: The Interdisciplinary Science Building

    ScienceCinema (OSTI)

    Gerry Stokes; Jim Misewich

    2013-07-19

    Construction is under way for the Interdisciplinary Science Building (ISB), a future world-class facility for energy research at Brookhaven Lab. Meet two scientists who will develop solutions at the ISB to tackle some of the nation's energy challenges, and tour the construction site.

  6. An Exciting Journey to Build the Tier 4 Locomotive | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    An Exciting Journey to Build the Tier 4 Locomotive Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) An Exciting Journey to Build the Tier 4 Locomotive Wole Akinyemi 2012.09.05 Last week, GE unveiled the Tier 4 Locomotive. The event culminates 7 years of exciting efforts by a global GE Transportation & Global Research

  7. Energy Savings Potential and Research, Development, & Demonstration Opportunities for Commercial Building Appliances

    SciTech Connect (OSTI)

    Zogg, Robert; Goetzler, William; Ahlfeldt, Christopher; Hiraiwa, Hirokazu; Sathe, Amul; Sutherland, Timothy

    2009-12-01

    This study characterizes and assesses the appliances used in commercial buildings. The primary objectives of this study were to document the energy consumed by commercial appliances and identify research, development and demonstration (RD&D) opportunities for efficiency improvements, excluding product categories such as HVAC, building lighting, refrigeration equipment, and distributed generation systems. The study included equipment descriptions, characteristics of the equipments market, national energy consumption, estimates of technical potential for energy-saving technologies, and recommendations for U.S. Department of Energy programs that can promote energy savings in commercial appliances.

  8. LOW ENERGY PROTON CAPTURE STUDY OF THE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LOW ENERGY PROTON CAPTURE STUDY OF THE 14 N(p, γ) 15 O REACTION Stephen Michael Daigle A dissertation submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the Depart- ment of Physics and Astronomy. Chapel Hill 2013 Approved by: Arthur E. Champagne Gerald Cecil Jonathan Engel Reyco Henning Christian Iliadis c 2013 Stephen Michael Daigle ALL RIGHTS RESERVED ii ABSTRACT Stephen Michael

  9. Improving Building Energy Simulation Programs Through Diagnostic Testing (Fact Sheet), NREL Highlights, Research & Development, NREL (National Renewable Energy Laboratory)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    test procedure evaluates quality and accuracy of energy analysis tools for the residential building retrofit market. Reducing the energy use of existing homes in the United States offers significant energy-saving opportunities, which can be identified through building simulation software tools that calculate optimal packages of efficiency measures. To improve the accuracy of energy analysis for residential buildings, the National Renewable Energy Laboratory's (NREL) Buildings Research team

  10. Windows and Building Envelope Research and Development: A Roadmap for Emerging Technologies

    SciTech Connect (OSTI)

    none,

    2014-02-01

    This Building Technologies Office (BTO) Research and Development (R&D) Roadmap identifies priority windows and building envelope R&D areas of interest. Cost and performance targets are identified for each key R&D area. The roadmap describes the technical and market challenges to be overcome, R&D activities and milestones, key stakeholders, and potential energy savings that could result if cost and performance targets are met. Methods for improving technology performance and specific strategies for reducing installed costs and mitigating any other market barriers, which would increase the likelihood of mass-market technology adoption, are identified. This roadmap is a useful resource for public and private decision makers evaluating and pursuing high-impact R&D focused on advancing next-generation energy efficient windows and building envelope technologies.

  11. Energy Savings Potential and Research, Development, & Demonstration Opportunities for Commercial Building Appliances

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Savings Potential and Research, Development, & Demonstration Opportunities for Commercial Building Appliances December 2009 i NOTICE This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government, nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the

  12. The low energy booster project status

    SciTech Connect (OSTI)

    Tuttle, G.W.

    1993-05-01

    In order to achieve the required injection momentum, the Superconducting Super Collider (SSC) has an accelerator chain comprised of a Linear Accelerator and three synchrotrons. The Low Energy Booster (LEB) is the first synchrotron in this chain. The LEB project has made significant progress in the development of major subsystems and conventional construction. This paper briefly reviews the performance requirements of the LEB and describes significant achievements in each of the major subsystem areas. Highlighted among these achievements are the LEB foreign collaborations with the Budker Institute of Nuclear Physics (BINP) located in Novosibirsk, Russia.

  13. New TCIPG Research Program Builds on Past Successes with Nearly $18.8 Million DOE Award

    Office of Environmental Management (EM)

    TCIPG Research Program Builds on Past Successes with Nearly $18.8 Million DOE Award November 5, 2009 A new award of nearly $18.8 million over a five-year period from the Department of Energy (DOE) and contributions from the Department of Homeland Security (DHS) will fund the new Trustworthy Cyber Infrastructure for the Power Grid (TCIPG) project, an expanded effort of the current project TCIP. The new TCIPG research program will develop and integrate information technologies with properties-such

  14. Low energy cyclotron for radiocarbon dating

    SciTech Connect (OSTI)

    Welch, J.J.

    1984-12-01

    The measurement of naturally occurring radioisotopes whose half lives are less than a few hundred million years but more than a few years provides information about the temporal behavior of geologic and climatic processes, the temporal history of meteoritic bodies as well as the production mechanisms of these radioisotopes. A new extremely sensitive technique for measuring these radioisotopes at tandem Van de Graaff and cyclotron facilities has been very successful though the high cost and limited availability have been discouraging. We have built and tested a low energy cyclotron for radiocarbon dating similar in size to a conventional mass spectrometer. These tests clearly show that with the addition of a conventional ion source, the low energy cyclotron can perform the extremely high sensitivity /sup 14/C measurements that are now done at accelerator facilities. We found that no significant background is present when the cyclotron is tuned to accelerate /sup 14/C negative ions and the transmission efficiency is adequate to perform radiocarbon dating on milligram samples of carbon. The internal ion source used did not produce sufficient current to detect /sup 14/C directly at modern concentrations. We show how a conventional carbon negative ion source, located outside the cyclotron magnet, would produce sufficient beam and provide for quick sampling to make radiocarbon dating milligram samples with a modest laboratory instrument feasible.

  15. Low-energy collective modes of deformed superfluid nuclei within...

    Office of Scientific and Technical Information (OSTI)

    Low-energy collective modes of deformed superfluid nuclei within the finite-amplitude method Citation Details In-Document Search Title: Low-energy collective modes of deformed ...

  16. Low Energy Probes of New Physics | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In this talk I discuss the role of low-energy nuclear probes in the quest for new physics beyond the Standard Model. After an introduction on the landscape of low-energy...

  17. RHIC low energy tests and initial operations

    SciTech Connect (OSTI)

    Satogata,T.; Ahrens, L.; Bai, M.; Brennan, J.M.; Bruno, D.; Butler, J.; Drees, A.; Fedotov, A.; Fischer, W.; Harvey, M.; Hayes, T.; Jappe, W.; Lee, R.C.; Mackay, W.W.; Malitsky, N.; Marr, G.; Michnoff, R.; Oerter, B.; Pozdeyev, E.; Roser, T.; Severino, F.; Smith, K.; Tepikian, S.; Tsoupas, N.

    2009-05-04

    Future Relativistic Heavy Ion Collider (RHIC) runs, including a portion of FY10 heavy ion operations, will explore collisions at center of mass energies of 5-50 GeV/n (GeV/nucleon). Operations at these energies is motivated by a search for the QCD phase transition critical point. The lowest end of this energy range is nearly a factor of four below the nominal RHIC injection center of mass energy of {radical} s = 20.8 GeV/n. There are several operational challenges in the RHIC low-energy regime, including harmonic number changes, small longitudinal acceptance, lowered magnet field quality, nonlinear orbit control, and luminosity monitoring. We report on the experience with some of these challenges during beam tests with gold in March 2008, including first RHIC operations at {radical}s = 9.18 GeV/n and first beam experience at {radical}s = 5 GeV/n.

  18. Low energy high pressure miniature screw valve

    DOE Patents [OSTI]

    Fischer, Gary J. (Sandia Park, NM); Spletzer, Barry L. (Albuquerque, NM)

    2006-12-12

    A low energy high pressure screw valve having a valve body having an upper portion and a lower portion, said lower portion of said valve body defining an inlet flow passage and an outlet flow passage traversing said valve body to a valve seat, said upper portion of said valve body defining a cavity at said valve seat, a diaphragm restricting flow between said upper portion of said valve body and said lower portion, said diaphragm capable of engaging said valve seat to restrict fluid communication between said inlet passage and said outlet passage, a plunger within said cavity supporting said diaphragm, said plunger being capable of engaging said diaphragm with said valve seat at said inlet and outlet fluid passages, said plunger being in point contact with a drive screw having threads engaged with opposing threads within said upper portion of said valve body such engagement allowing motion of said drive screw within said valve body.

  19. Proceedings of the 25th Seismic Research Review -- Nuclear Explosion Monitoring: Building the Knowledge Base

    SciTech Connect (OSTI)

    Chavez, Francesca C.; Mendius, E. Louise

    2003-09-23

    These proceedings contain papers prepared for the 25th Seismic Research Review -- Nuclear Explosion Monitoring: Building the Knowledge Base, held 23-25 September, 2003 in Tucson, Arizona. These papers represent the combined research related to ground-based nuclear explosion monitoring funded by the National Nuclear Security Administration (NNSA), Defense Threat Reduction Agency (DTRA), Air Force Research Laboratory (AFRL), US Army Space and Missile Defense Command, and other invited sponsors. The scientific objectives of the research are to improve the United States capability to detect, locate, and identify nuclear explosions. The purpose of the meeting is to provide the sponsoring agencies, as well as potential users, an opportunity to review research accomplished during the preceding year and to discuss areas of investigation for the coming year. For the researchers, it provides a forum for the exchange of scientific information toward achieving program goals, and an opportunity to discuss results and future plans. Paper topics include: seismic regionalization and calibration; detection and location of sources; wave propagation from source to receiver; the nature of seismic sources, including mining practices; hydroacoustic, infrasound, and radionuclide methods; on-site inspection; and data processing.

  20. Summary of Prioritized Research Opportunities: Building America Program Planning Meeting, Washington, D.C., November 2-4, 2010

    SciTech Connect (OSTI)

    Not Available

    2011-02-01

    This report outlines the results of brainstorming sessions conducted at the Building America Fall 2010 planning meeting, in which research teams and national laboratories identified key research priorities to incorporate into multi-year planning, team research agendas, expert meetings, and technical standing committees.

  1. RHIC low-energy challenges and plans

    SciTech Connect (OSTI)

    Satogata,T.; Ahrens, L.; Bai, M.; Brennan, J.M.; Bruno, D.; Butler, J.; Drees, A.; Fedotov, A.; Fischer, W.; Harvey, M.; Hayes, T.; Jappe, W.; Lee, R.C.; MacKay, W.W.; Malitsky, N.; Marr, G.; Michnoff, R.; Oerter, B.; Pozdeyev, E.; Roser, T.; Schoefer, V.; Severino, F.; Smith, K.; Tepikian, S.; Tsoupas, N.

    2009-06-08

    Future Relativistic Heavy Ion Collider (RHIC) runs, including a portion of FY10 heavy ion operations, will explore collisions at center of mass energies of 5-50 GeV/n (GeV/nucleon). Operations at these energies is motivated by the search for a possible QCD phase transition critical point. The lowest end of this energy range is nearly a factor of four below the nominal RHIC injection center of mass energy {radical}s = 19.6 GeV/n. There are several operational challenges in the RHIC low-energy regime, including harmonic number changes, small longitudinal acceptance, lowered magnet field quality, nonlinear orbit control, and luminosity monitoring. We report on the experience with these challenges during beam tests with gold beams in March 2008. This includes first operations at {radical}s = 9.18 GeV/n, first beam experience at {radical}s = 5 GeV/n, and luminosity projections for near-term operations.

  2. Low energy neutral atoms from the heliosheath

    SciTech Connect (OSTI)

    Fuselier, S. A.; Allegrini, F.; Dayeh, M. A.; Desai, M.; Lewis, W.; Livadiotis, G.; McComas, D. J. E-mail: fallegrini@swri.edu E-mail: mdesai@swri.edu E-mail: george.livadiotis@swri.org; and others

    2014-04-01

    In the heliosheath beyond the termination shock, low energy (<0.5 keV) neutral atoms are created by charge exchange with interstellar neutrals. Detecting these neutrals from Earth's orbit is difficult because their flux is reduced substantially by ionization losses as they propagate from about 100 to 1 AU and because there are a variety of other signals and backgrounds that compete with this weak signal. Observations from IBEX-Lo and -Hi from two opposing vantage points in Earth's orbit established a lower energy limit of about 0.1 keV on measurements of energetic neutral atoms (ENAs) from the heliosphere and the form of the energy spectrum from about 0.1 to 6 keV in two directions in the sky. Below 0.1 keV, the detailed ENA spectrum is not known, and IBEX provides only upper limits on the fluxes. However, using some assumptions and taking constraints on the spectrum into account, we find indications that the spectrum turns over at an energy between 0.1 and 0.2 keV.

  3. Building-Grid Integration Research and Development Innovators Program (BIRD IP)

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Building Technologies Office (BTO) within the Department of Energy (DOE) is seeking graduate students interested in exploring building-grid integration and development (R&D) technology concepts that can improve the operating efficiency of buildings and increase penetration of distributed renewable energy generation, leading to more efficient buildings and cleaner generation of electricity.

  4. Low energy beam transport system developments

    SciTech Connect (OSTI)

    Dudnikov, V.; Han, B.; Stockli, M.; Welton, R.; Dudnikova, G.

    2015-04-08

    For high brightness beam production it is important to preserve the brightness in the low energy beam transport system (LEBT) used to transport and match the ion beams to the next stage of acceleration, usually an RFQ. While electrostatic focusing can be problematic for high current beam transport, reliable electrostatic LEBT operation has been demonstrated with H{sup ?} beams up to 60?mA. Now, however, it is commonly accepted that an optimal LEBT for high current accelerator applications consists of focusing solenoids with space charge compensation. Two-solenoid LEBTs are successfully used for high current (>100?mA) proton beam transport. Preservation of low emittances (~0.15 ? mm-mrad) requires the addition of a heavy gas (Xe, Kr), which causes ~5% of proton loss in a 1?m long LEBT. Similar Xe densities would be required to preserve low emittances of H{sup ?} beams, but such gas densities cause unacceptably high H{sup ?} beam losses. A short LEBT with only one short solenoid, movable for RFQ matching, can be used for reduced negative ion stripping. A strong electrostatic-focusing LEBT has been successfully adopted for transport of high current H{sup ?} beams in the SNS Front End. Some modifications of such electrostatic LEBTs are expected to improve the reliable transport of intense positive and negative ion beams without greatly degrading their low emittances. We concentrate on processes that determine the beam brightness degradation and on their prevention. Proposed improvements to the SNS electrostatic LEBT are discussed.

  5. Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Marine Climates; January 2006 - December 2006

    SciTech Connect (OSTI)

    Building America Industrialized Housing Partnership; Building Industry Research Alliance; Building Science Consortium; Consortium for Advanced Residential Buildings; Davis Energy Group; IBACOS; National Association of Home Builders Research Center; National Renewable Energy Laboratory

    2006-12-01

    The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Marine Climate Region on a cost neutral basis.

  6. Development of Low Energy Gap and Fully Regioregular Polythienylenevinylene

    Office of Scientific and Technical Information (OSTI)

    Derivative (Journal Article) | SciTech Connect Development of Low Energy Gap and Fully Regioregular Polythienylenevinylene Derivative Citation Details In-Document Search Title: Development of Low Energy Gap and Fully Regioregular Polythienylenevinylene Derivative Low energy gap and fully regioregular conjugated polymers find its wide use in solar energy conversion applications. This paper will first briefly review this type of polymers and also report synthesis and characterization of a

  7. Multi-gigaelectronvolt, low-energy spread acceleration of positrons...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Multi-gigaelectronvolt, low-energy spread acceleration of positrons in a self-loaded plasma wakefield Citation Details In-Document Search Title:...

  8. Information Content of the Low-Energy Electric Dipole Strength...

    Office of Scientific and Technical Information (OSTI)

    heavy nuclei have stimulated theoretical interest in the low-energy electric dipole ... Methods: We use the self-consistent nuclear density functional theory with Skyrme energy ...

  9. Numerical simulations for low energy nuclear reactions including...

    Office of Scientific and Technical Information (OSTI)

    Numerical simulations for low energy nuclear reactions including direct channels to validate statistical models Citation Details In-Document Search Title: Numerical simulations for...

  10. DEAP and CLEAN Detectors for Low Energy Particle Astrophysics...

    Office of Scientific and Technical Information (OSTI)

    DEAP and CLEAN Detectors for Low Energy Particle Astrophysics Citation Details In-Document ... FIELDS; 46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND TECHNOLOGY; ARGON; ...

  11. Development of Low Energy Gap and Fully Regioregular Polythienylenevin...

    Office of Scientific and Technical Information (OSTI)

    Gap and Fully Regioregular Polythienylenevinylene Derivative Low energy gap and fully regioregular conjugated polymers find its wide use in solar energy conversion applications. ...

  12. Building America

    SciTech Connect (OSTI)

    Brad Oberg

    2010-12-31

    IBACOS researched the constructability and viability issues of using high performance windows as one component of a larger approach to building houses that achieve the Building America 70% energy savings target.

  13. Development and application of LEESA (Low Energy Electrostatic Sensitivity Apparatus)

    SciTech Connect (OSTI)

    Carlson, R.S. ); Wood, R.L. )

    1990-01-01

    A precision Low Energy Electrostatic Sensitivity Apparatus (LEESA) was developed in the voltage range 0--3000 volts dc and was employed over a capacitance range of 25--50,000 pF on sensitive, very sensitive, and extremely sensitive pyrotechnic fuels and compositions. Zirconium powder, Zr/KClO{sub 4} pyrotechnic, titanium powder, Ti/KClO{sub 4} and TiH{sub x}/KClO{sub 4} pyrotechnics (x = 0.65, 1.65) and several other sensitive materials were evaluated. LEESA simulates casual human contact with potentially hazardous materials. In operation, a hand-held probe is applied to the sample to discharge the capacitance. As the probe approaches the sample, a spark jumps from the probe tip to the sample when the gap closes to the appropriate distance. This is analagous to a finger or a tool touching a sensitive material during which maneuver a spark jumps to the material. LEESA defines the probability of ignition over a voltage or energy range and is capable of thousands of trials on a test material in the span of a few hours. In addition to evaluating static sensitivity, the effect of electrode polarity, individual differences between operators, test method, humidity, sample size, particle size, capacitance, time constant RC, and voltage versus energy have been determined. The equipment is inexpensive and easy to build and use and is a low risk method because of the small quantities of sensitive material being tested at any one time. The accuracy and precision of the results surpasses that of methods currently in use. 7 refs., 11 figs., 1 tab.

  14. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    9 Number of Construction Employees and Total Employees for Select Building Equipment Industries (Thousand Employees) Electrical Contractors and Other Wiring Installation Contractors (NAICS 238210) -Total Employment -Construction/Extraction Occupations -Construction/Extraction % of Total Plumbing, Heating, and Air-Conditioning Contractors (NAICS 238220) -Total Employment -Construction/Extraction Occupations -Construction/Extraction % of Total Other Building Equipment Contractors (NAICS 238290)

  15. adv-low-energy-enzyme | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Low Energy Enzyme Catalyzed Solvent for CO2 Capture Project No.: DE-FE0004228 Akermin, Inc. is to conduct bench-scale testing to demonstrate the performance of an advanced carbonic...

  16. Biological assessments for the low energy demonstration accelerator, 1996

    SciTech Connect (OSTI)

    Cross, S.

    1997-03-01

    This report discusses the biological impact to the area around the Los Alamos National Laboratory of the Low Energy Demonstration Accelerator. In particular the impact to the soils, water quality, vegetation, and wildlife are discussed.

  17. Low-energy supersymmetry breaking without the gravitino problem...

    Office of Scientific and Technical Information (OSTI)

    This content will become publicly available on July 8, 2016 Title: Low-energy ... will become publicly available on July 8, 2016 Publisher's Version of Record 10.1103...

  18. Buildings*","Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Water-Heating Energy Sources, Number of Buildings for Non-Mall Buildings, 2003" ,"Number of Buildings (thousand)" ,"All Buildings*","Buildings with Water Heating","Water-Heating ...

  19. Numerical simulations for low energy nuclear reactions including direct

    Office of Scientific and Technical Information (OSTI)

    channels to validate statistical models (Conference) | SciTech Connect Numerical simulations for low energy nuclear reactions including direct channels to validate statistical models Citation Details In-Document Search Title: Numerical simulations for low energy nuclear reactions including direct channels to validate statistical models Authors: Kawano, Toshihiko [1] + Show Author Affiliations Los Alamos National Laboratory [Los Alamos National Laboratory Publication Date: 2014-01-08 OSTI

  20. Prospects for achieving high dynamic compression with low energy (Journal

    Office of Scientific and Technical Information (OSTI)

    Article) | SciTech Connect Prospects for achieving high dynamic compression with low energy Citation Details In-Document Search Title: Prospects for achieving high dynamic compression with low energy Authors: Armstrong, M R ; Bastea, S ; Crowhurst, J ; Howard, W ; Zaug, J ; Goncharov, A Publication Date: 2012-07-30 OSTI Identifier: 1057245 Report Number(s): LLNL-JRNL-574752 DOE Contract Number: W-7405-ENG-48 Resource Type: Journal Article Resource Relation: Journal Name: Applied Physics

  1. Low-energy supersymmetry breaking without the gravitino problem (Journal

    Office of Scientific and Technical Information (OSTI)

    Article) | SciTech Connect Low-energy supersymmetry breaking without the gravitino problem Citation Details In-Document Search This content will become publicly available on July 8, 2016 Title: Low-energy supersymmetry breaking without the gravitino problem Authors: Hook, Anson ; Murayama, Hitoshi Publication Date: 2015-07-09 OSTI Identifier: 1198646 Grant/Contract Number: SC0009988; AC03-76SF00098 Type: Publisher's Accepted Manuscript Journal Name: Physical Review D Additional Journal

  2. A microscopic theory of low energy fission: fragment properties

    Office of Scientific and Technical Information (OSTI)

    (Conference) | SciTech Connect Conference: A microscopic theory of low energy fission: fragment properties Citation Details In-Document Search Title: A microscopic theory of low energy fission: fragment properties Authors: Younes, W ; Gogny, D ; Schunck, N Publication Date: 2013-01-11 OSTI Identifier: 1062214 Report Number(s): LLNL-PROC-609985 DOE Contract Number: W-7405-ENG-48 Resource Type: Conference Resource Relation: Conference: Presented at: Fifth International Conference on Fission

  3. A microscopic theory of low energy fission: fragment properties

    Office of Scientific and Technical Information (OSTI)

    (Conference) | SciTech Connect Conference: A microscopic theory of low energy fission: fragment properties Citation Details In-Document Search Title: A microscopic theory of low energy fission: fragment properties Authors: Younes, W ; Gogny, D ; Schunck, N Publication Date: 2013-01-11 OSTI Identifier: 1062214 Report Number(s): LLNL-PROC-609985 DOE Contract Number: W-7405-ENG-48 Resource Type: Conference Resource Relation: Conference: Presented at: Fifth International Conference on Fission

  4. Energy Savings Potential and Research, Development, & Demonstration Opportunities for Commercial Building Heating, Ventilation, and Air Conditioning Systems

    SciTech Connect (OSTI)

    none,

    2011-09-01

    This report covers an assessment of 182 different heating, ventilation, and air-conditioning (HVAC) technologies for U.S. commercial buildings to identify and provide analysis on 17 priority technology options in various stages of development. The analyses include an estimation of technical energy-savings potential, description of technical maturity, description of non-energy benefits, description of current barriers for market adoption, and description of the technologys applicability to different building or HVAC equipment types. From these technology descriptions, are suggestions for potential research, development and demonstration (RD&D) initiatives that would support further development of the priority technology options.

  5. Energy Savings Potential and Research, Development, & Demonstration Opportunities for Residential Building Heating, Ventilation, and Air Conditioning Systems

    SciTech Connect (OSTI)

    Goetzler, William; Zogg, Robert; Young, Jim; Schmidt, Justin

    2012-10-01

    This report is an assessment of 135 different heating, ventilation, and air-conditioning (HVAC) technologies for U.S. residential buildings to identify and provide analysis on 19 priority technology options in various stages of development. The analyses include an estimation of technical energy-savings potential, descriptions of technical maturity, descriptions of non-energy benefits, descriptions of current barriers for market adoption, and descriptions of the technology's applicability to different building or HVAC equipment types. From these technology descriptions, are suggestions for potential research, development and demonstration (RD&D) initiatives that would support further development of the priority technology options.

  6. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    7 Buildings Design and Construction Trades, by Year | | | 1980 | 1982 14.4 1990 | 1987 38.4 2000 (4) | 1992 36.3 2005 | 1997 46.6 2006 | 2002 95.4 2007 | 2007 52.4 2008 | 2009 | 2010 | Note(s): Source(s): 1) Does not include industrial building or heavy construction (e.g., dam and bridge building). In 1999, 76% of the employment shown is considered for "production." The entire U.S. construction industry employs an estimated 10 million people, including manufacturing. 2) In 2000, NAHB

  7. Plug-Load Control and Behavioral Change Research in GSA Office Buildings

    SciTech Connect (OSTI)

    Metzger, I.; Cutler, D.; Sheppy, M.

    2012-10-01

    The U.S. General Services Administration (GSA) owns and leases over 354 million square feet (ft2) of space in over 9,600 buildings [1]. GSA is a leader among federal agencies in aggressively pursuing energy efficiency (EE) opportunities for its facilities and installing renewable energy (RE) systems to provide heating, cooling, and power to these facilities. According to several energy assessments of GSA's buildings conducted by the National Renewable Energy Laboratory (NREL), plug-loads account for approximately 21% of the total electricity consumed within a standard GSA Region 3 office building. This study aims to provide insight on how to effectively manage plug-load energy consumption and attain higher energy and cost savings for plug-loads. As GSA improves the efficiency of its building stock, plug-loads will become an even greater portion of its energy footprint.

  8. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    1 Estimated Value of All U.S. Construction Relative to the GDP ($2010) - 2007 estimated value of all U.S. construction was $1.82 trillion (including renovation; heavy construction; public works; residential, commercial, and industrial new construction; and non-contract work). - Compared to the $14.6 trillion 2007 U.S. gross domestic product (GDP), all construction held a 12.4% share. - In 2007, residential and commercial building renovation (valued at $496 billion) and new building construction

  9. Building America: Bringing Building Innovations to Market | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy America: Bringing Building Innovations to Market Building America: Bringing Building Innovations to Market Building America Research-to-Market Plan Released Building America Research-to-Market Plan Released Read the plan that will guide Building America's research and development activities over the coming years. Read more New Building America Projects Focus on Building Envelope, Ventilation, and More New Building America Projects Focus on Building Envelope, Ventilation, and More

  10. Monitored performance of new, low-energy homes: updated results from the BECA-A data base

    SciTech Connect (OSTI)

    Busch, J.F.; Meier, A.K.

    1986-03-01

    We compiled and analyzed energy consumption data, construction details, and operating characteristics for over three hundred new, low-energy homes. Over two thirds of the buildings incorporated solar features. A sequence of standardization procedures were developed to compare the energy performance of the buildings. The procedures adjusted the reported heating energy consumption for variations in the climate, floor area, internal gains, and reported indoor temperature. Two indicators of thermal performance were developed, the balance temperature and a k-value, which roughly corresponds to the overall UA of the building but also includes the ability of the house to exploit solar gains and thermal mass. The buildings in the data base have an average balance temperature of 12/sup 0/C and a k-value of 114 W//sup 0/C. Earth-sheltered buildings perform best, but only slightly better than passive solar and superinsulated buildings.

  11. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    2 Value of New Building Construction Relative to GDP, by Year ($2010 Billion) Value of New Construction Put in Place Bldgs. Percent of Residential Commercial (1) All Bldgs. (1) GDP Total U.S. GDP 1980 5.0% 1985 5.8% 1990 4.9% 1995 4.4% 2000 5.2% 2005 6.0% 2006 5.9% 2007 5.2% 2008 4.4% 2009 3.3% 2010 2.6% Note(s): Source(s): 129.8 247.7 377.4 14,660 1) New buildings construction differs from Table 1.3.2 by excluding industrial building construction. DOC, Current Construction Reports: Value of New

  12. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    4 2003 U.S. Private Investment into Construction R&D Sector Average Construction R&D (1) 1.2 Building Technology Heavy Construction 2.0 Appliances 2.0 Special Trade Construction 0.2 Lighting 1.2 HVAC 1.5 U.S. Average of All Private R&D (2) 3.2 Fans, Blowers, & Air Cleaning Equipment 1.6 Manufacturing Average 3.1 Lumber and Wood Products 0.3 Service Industry Average 3.3 Commercial Building Operations 2.2 Note(s): Source(s): Percent of Sales Percent of Sales 1) Includes all

  13. Building America System Research Plan for Reduction of Miscellaneous Electrical Loads in Zero Energy Homes

    SciTech Connect (OSTI)

    Barley, C. D.; Haley, C.; Anderson, R.; Pratsch, L.

    2008-11-01

    This research plan describes the overall scope of system research that is needed to reduce miscellaneous electrical loads (MEL) in future net zero energy homes.

  14. Building America Research Teams: BA-PIRC and IBACOS-Pioneers...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    With access to several research facilities-the Manufactured Housing Laboratory, Hot Water Systems Laboratory, and Flexible Research Test Facility- BA-PIRC works with industry ...

  15. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    8 Number of Construction Employees and Total Employees for Select Building Envolope Industries (Thousand Employees) Poured Concrete Foundation and Structure Contractors (NAICS 238110) -Total Employment -Construction/Extraction Occupations -Construction/Extraction % of Total Masonry Contractors (NAICS 238140) -Total Employment -Construction/Extraction Occupations -Construction/Extraction % of Total Roofing Contractors (NAICS 238160) -Total Employment -Construction/Extraction Occupations

  16. Extreme dynamic compression with a low energy laser pulse (Conference) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Conference: Extreme dynamic compression with a low energy laser pulse Citation Details In-Document Search Title: Extreme dynamic compression with a low energy laser pulse Authors: Armstrong, M R ; Crowhurst, J C ; Zaug, J M ; Radousky, H B Publication Date: 2015-08-18 OSTI Identifier: 1234612 Report Number(s): LLNL-PROC-676476 DOE Contract Number: AC52-07NA27344 Resource Type: Conference Resource Relation: Conference: Presented at: Extreme dynamic compression with a low

  17. Windows and Building Envelope Research and Development: Roadmap for Emerging Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    R&D Roadmap For Emerging Window And Building Envelope Technologies ii Cover Photo Credits: IStockphoto DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government, nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or

  18. MEIC Proton Beam Formation with a Low Energy Linac

    SciTech Connect (OSTI)

    Zhang, Yuhong

    2015-09-01

    The MIEC proton and ion beams are generated, accumulated, accelerated and cooled in a new green-field ion injector complex designed specifically to support its high luminosity goal. This injector consists of sources, a linac and a small booster ring. In this paper we explore feasibility of a short ion linac that injects low energy protons and ions into the booster ring.

  19. Joint China-United States Report for Year 1 Insulation Materials and Systems Project Area Clean Energy Research Center Building Energy Efficiency (CERC-BEE)

    SciTech Connect (OSTI)

    Stovall, Therese K; Biswas, Kaushik; Song, Bo; Zhang, Sisi

    2012-08-01

    In November of 2009, the presidents of China and the U.S. announced the establishment of the Clean Energy Research Center (CERC). This broad research effort is co-funded by both countries and involves a large number of research centers and universities in both countries. One part of this program is focused on improving the energy efficiency of buildings. One portion of the CERC-BEE was focused on building insulation systems. The research objective of this effort was to Identify and investigate candidate high performance fire resistant building insulation technologies that meet the goal of building code compliance for exterior wall applications in green buildings in multiple climate zones. A Joint Work Plan was established between researchers at the China Academy of Building Research and Oak Ridge National Laboratory. Efforts in the first year under this plan focused on information gathering. The objective of this research program is to reduce building energy use in China via improved building insulation technology. In cold regions in China, residents often use inefficient heating systems to provide a minimal comfort level within inefficient buildings. In warmer regions, air conditioning has not been commonly used. As living standards rise, energy consumption in these regions will increase dramatically unless significant improvements are made in building energy performance. Previous efforts that defined the current state of the built environment in China and in the U.S. will be used in this research. In countries around the world, building improvements have typically followed the implementation of more stringent building codes. There have been several changes in building codes in both the U.S. and China within the last few years. New U.S. building codes have increased the amount of wall insulation required in new buildings. New government statements from multiple agencies in China have recently changed the requirements for buildings in terms of energy efficiency and fire safety. A related issue is the degree to which new standards are adopted and enforced. In the U.S., standards are developed using a consensus process, and local government agencies are free to implement these standards or to ignore them. For example, some U.S. states are still using 2003 versions of the building efficiency standards. There is also a great variation in the degree to which the locally adopted standards are enforced in different U.S. cities and states. With a more central process in China, these issues are different, but possible impacts of variable enforcement efficacy may also exist. Therefore, current building codes in China will be compared to the current state of building fire-safety and energy-efficiency codes in the U.S. and areas for possible improvements in both countries will be explored. In particular, the focus of the applications in China will be on green buildings. The terminology of 'green buildings' has different meanings to different audiences. The U.S. research is interested in both new, green buildings, and on retrofitting existing inefficient buildings. An initial effort will be made to clarify the scope of the pertinent wall insulation systems for these applications.

  20. NREL Technical Reports Guide the Way to 50% Energy Savings in Hospitals, Office Buildings (Fact Sheet), NREL Highlights, Research & Development, NREL (National Renewable Energy Laboratory)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    existing technologies, designers and operators of large buildings could slash national energy use across a broad range of climates. Researchers at the National Renewable Energy Laboratory (NREL) have developed two technical reports that provide recommendations to help designers and opera- tors of large office buildings and hospitals achieve at least a 50% energy savings using existing technology. Strategies for 50% Energy Savings in Large Office Buildings found that a 50% energy savings can be

  1. Building America Whole-House Solutions for Existing Homes: Conway...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    multifamily buildings. In this project, the team helped to transform a 100-year-old empty school building into 12 high performance apartments with low energy costs. The advanced...

  2. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    3 Value of Building Improvements and Repairs Relative to GDP, by Year ($2010 Billion) (1) GDP 1980 N.A. 1985 (2) 4.2% 1990 (3) 3.9% 1995 3.5% 2000 3.0% 2006 3.6% 2007 3.7% Note(s): Source(s): 235.7 259.8 495.5 13,354.9 1) Improvements includes additions, alterations, reconstruction, and major replacements. Repairs include maintenance. 2) 1986. 3) 1989. DOC, Expenditures for Residential Improvements and Repairs by Property Type, Quarterly, May 2005 for 1980-1990; DOC, Expenditures for Residential

  3. Metal Buildings M&V

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Atlas Bolt & Screw Behlen Manufacturing Butler Manufacturing Building Research Systems Kirby Building Systems DOW Lamtec Schulte Building Systems Participants: Bigbee Steel Chief ...

  4. PEV Grid Integration Research: Vehicles, Buildings, and Renewables Working Together (Presentation)

    SciTech Connect (OSTI)

    Markel, T.

    2014-06-01

    Presented at the Electric Power Research Institute (EPRI) Infrastructure Working Council (IWC) Meeting, 18-19 June 2014, White Plains, New York

  5. PEV Grid Integration Research - Vehicles, Buildings, and Renewables Working Together; NREL (National Renewable Energy Laboratory)

    SciTech Connect (OSTI)

    2015-07-29

    This presentation will discuss current research activities in PEV grid integration at NREL. Presented at the 2015 IEEE Power and Energy Systems General Meeting, Denver, Colorado.

  6. The Value of Energy Performance and Green Attributes in Buildings: A Review of Existing Literature and Recommendations for Future Research

    SciTech Connect (OSTI)

    Stuart, Elizabeth

    2011-09-07

    Labels, certifications, and rating systems for energy efficiency performance and green attributes of buildings have been available in the U.S. for over 10 years, and used extensively in the European Union and Australia for longer. Such certifications and ratings can make energy efficiency more visible, and could help spur demand for energy efficiency if these designations are shown to have a positive impact on sales or rental prices. This policy brief discusses the findings and methodologies from recent studies on this topic, and suggests recommendations for future research. Although there have been just a handful of studies within the last 10 years that have investigated these effects, a few key findings emerge: To maximize sales price impact, label or rating information must be disclosed early and visibly in the sales process; The approach to evaluating energy efficiency labels (e.g., ENERGY STAR) and general green certifications (e.g., LEED or GreenPoint Rated) may need to be different, depending on the type, vintage and market penetration of the label; Collaborative efforts to promote label adoption and build a large dataset of labeled buildings will be required to produce reliable study results.

  7. Building America Residential System Research Results. Achieving 30% Whole House Energy Savings Level in Hot-Dry and Mixed-Dry Climates

    SciTech Connect (OSTI)

    Anderson, R.; Hendron, R.; Eastment, M.; Jalalzadeh-Azar, A.

    2006-01-01

    This report summarizes Building America research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Hot-Dry/Mixed-Dry Climate Region on a cost-neutral basis.

  8. Building America Case Study: Ground Source Heat Pump Research, TaC Studios Residence, Atlanta, Georigia (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-09-01

    As part of the NAHB Research Center Industry Partnership, Southface partnered with TaC Studios, an Atlanta based architecture firm specializing in residential and light commercial design, on the construction of a new test home in Atlanta, GA in the mixed-humid climate. This home serves as a residence and home office for the firm's owners, as well as a demonstration of their design approach to potential and current clients. Southface believes the home demonstrates current best practices for the mixed-humid climate, including a building envelope featuring advanced air sealing details and low density spray foam insulation, glazing that exceeds ENERGY STAR requirements, and a high performance heating and cooling system. Construction quality and execution was a high priority for TaC Studios and was ensured by a third party review process. Post construction testing showed that the project met stated goals for envelope performance, an air infiltration rate of 2.15 ACH50. The homeowner's wished to further validate whole house energy savings through the project's involvement with Building America and this long-term monitoring effort. As a Building America test home, this home was evaluated to detail whole house energy use, end use loads, and the efficiency and operation of the ground source heat pump and associated systems. Given that the home includes many non-typical end use loads including a home office, pool, landscape water feature, and other luxury features not accounted for in Building America modeling tools, these end uses were separately monitored to determine their impact on overall energy consumption.

  9. Low-energy magnetic radiation: Deviations from GOE

    SciTech Connect (OSTI)

    Frauendorf, S.; Schwengner, R.; Wimmer, K.

    2014-10-15

    A pronounced spike at low energy in the strength function for magnetic radiation (LEMAR) is found by means of Shell Model calculations, which explains the experimentally observed enhancement of the dipole strength. LEMAR originates from statistical low-energy M1-transitions between many excited complex states. Re-coupling of the proton and neutron high-j orbitals generates the strong magnetic radiation. LEMAR is closely related to Magnetic Rotation. LEMAR is predicted for nuclides participating in the r-process of element synthesis and is expected to change the reaction rates. An exponential decrease of the strength function and a power law for the size distribution of the B(M1) values are found, which strongly deviate from the ones of the GOE of random matrices, which is commonly used to represent complex compound states.

  10. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    5 2007-2010 Investment into Construction and Energy R&D, by Selected Country Year United States 2007 0.1 0.6 Australia 2010 5.2 1.8 China 2009 1.3 2.5 France 2007 0.4 1.6 Germany 2008 0.1 0.3 Italy 2010 0.9 0.8 Japan 2009 1.0 0.5 Norway 2008 1.4 2.2 Portugal 2008 1.7 6.0 South Africa 2007 0.1 16.2 South Korea 2008 2.5 1.0 United Kingdom 2008 0.1 0.2 Note(s): Source(s): Includes all construction (e.g., bridges, roads, dams, buildings, etc.). National Science Board, Science and Engineering

  11. An Information Building on Radioactivity and Nuclear Energy for the French CEA Cadarache Research Center - 13492

    SciTech Connect (OSTI)

    Brunel, Guy; Denis, Dominique; Boulet, Alain

    2013-07-01

    The CEA Cadarache research center is one of the 10 research centers of the French Alternative Energies and Atomic Energy Commission (CEA). Distributed throughout various research platforms, it focuses on nuclear fission, nuclear fusion, new energy technologies (hydrogen, solar, biomass) and fundamental research in the field of vegetal biology. It is the most important technological research and development centers for energy in Europe. Considering the sensitive nature of nuclear activities, the questions surrounding the issue of radioactive waste, the nuclear energy and the social, economic and environmental concerns for present and future generations, the French Government asked nuclear actors to open communication and to give all the information asked by the Local Information Commission (CLI) and the public [1]. In this context, the CEA Cadarache has decided to better show and explain its expertise and experience in the area of nuclear energy and nuclear power plant design, and to make it available to stakeholders and to the public. CEA Cadarache receives each year more than 9000 visitors. To complete technical visits of the research facilities and laboratories, a scientific cultural center has been built in 2011 to inform the public on CEA Cadarache research activities and to facilitate the acceptance of nuclear energy in a way suited to the level of knowledge of the visitors. A modern interactive exhibition of 150 m{sup 2} allows visitors to find out more about energy, CEA Cadarache research programs, radioactive waste management and radiological impact on the research center activities. It also offers an auditorium for group discussions and for school groups to discover science through enjoyment. This communication center has received several thousand visitors since its opening on October 2011; the initial results of this experience are now available. It's possible to explain the design of this exhibition, to give some statistics on the number of the visitors, their characteristics and their perception after their center visits. (authors)

  12. Pin diode calibration - beam overlap monitoring for low energy cooling

    SciTech Connect (OSTI)

    Drees, A.; Montag, C.; Thieberger, P.

    2015-09-30

    We were trying to address the question whether or not the Pin Diodes, currently installed approximately 1 meter downstream of the RHIC primary collimators, are suitable to monitor a recombination signal from the future RHIC low energy cooling section. A maximized recombination signal, with the Au+78 ions being lost on the collimator, will indicate optimal Au-electron beam overlap as well as velocity matching of the electron beam in the cooling section.

  13. Advanced Energy Design Guides Slash Energy Use in Schools and Retail Buildings by 50% (Fact Sheet), NREL Highlights, Research & Development, NREL (National Renewable Energy Laboratory)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Results Achievement NREL's Commercial Buildings Group executed advanced energy modeling simulations and optimized the design of schools and retail buildings to develop recommendations that result in 50% energy savings over code. NREL developed the simulation tools and led the committee that produced the guides. Key Result The Advanced Energy Design Guides, based on the work of NREL's researchers, provide owners, contractors, engineers, and architects user-friendly, how-to guidance by

  14. NREL Evaluates Thermal Performance of Uninsulated Walls to Improve Accuracy of Building Energy Simulation Tools (Fact Sheet), NREL Highlights, Research & Development, NREL (National Renewable Energy Laboratory)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    researchers discover ways to increase accuracy in building energy simulations tools to improve predictions of potential energy savings in homes. Uninsulated walls are typical in older U.S. homes where the wall cavities were not insulated during construction or where the insulating material has settled. Researchers at the National Renewable Energy Laboratory (NREL) are investigating ways to more accurately calculate heat transfer through building enclosures to verify the benefit of energy

  15. Comparison of building energy use data between the United States and China

    SciTech Connect (OSTI)

    Xia , Jianjun; Hong , Tianzhen; Shen, Qi; Feng , Wei; Yang, Le; Im , Piljae; Lu, Alison; Bhandari , Mahabir

    2013-10-30

    Buildings in the United States and China consumed 41percent and 28percent of the total primary energy in 2011, respectively. Good energy data are the cornerstone to understanding building energy performance and supporting research, design, operation, and policy making for low energy buildings. This paper presents initial outcomes from a joint research project under the U.S.-China Clean Energy Research Center for Building Energy Efficiency. The goal is to decode the driving forces behind the discrepancy of building energy use between the two countries; identify gaps and deficiencies of current building energy monitoring, data collection, and analysis; and create knowledge and tools to collect and analyze good building energy data to provide valuable and actionable information for key stakeholders. This paper first reviews and compares several popular existing building energy monitoring systems in both countries. Next a standard energy data model is presented. A detailed, measured building energy data comparison was conducted for a few office buildings in both countries. Finally issues of data collection, quality, sharing, and analysis methods are discussed. It was found that buildings in both countries performed very differently, had potential for deep energy retrofit, but that different efficiency measures should apply.

  16. Office Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    page, please call 202-586-8800. There were enough buildings in the responding sample to report statistics for all of these types except for research and development, which has...

  17. Building Technologies Office Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Roland Risser Director, Building Technologies Office Building Technologies Office Energy Efficiency Starts Here. 2 Building Technologies Office Integrated Approach: Improving Building Performance Research & Development Developing High Impact Technologies Standards & Codes Locking in the Savings Market Stimulation Accelerating Tech-to- Market 3 Building Technologies Office Goal: Reduce building energy use by 50% (compared to a 2010 baseline) 4 Building Technologies Office Working to

  18. Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Mixed-Humid Climates; January 2006 - December 2006

    SciTech Connect (OSTI)

    Building America Industrialized Housing Partnership; Building Industry Research Alliance; Building Science Consortium; Consortium for Advanced Residential Buildings; Davis Energy Group; IBACOS; National Association of Home Builders Research Center; National Renewable Energy Laboratory

    2006-12-01

    The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Mixed-Humid Climate Region on a cost-neutral basis.

  19. Method and apparatus for generating low energy nuclear particles

    DOE Patents [OSTI]

    Powell, James R.; Reich, Morris; Ludewig, Hans; Todosow, Michael

    1999-02-09

    A particle accelerator (12) generates an input particle beam having an initial energy level above a threshold for generating secondary nuclear particles. A thin target (14) is rotated in the path of the input beam for undergoing nuclear reactions to generate the secondary particles and correspondingly decrease energy of the input beam to about the threshold. The target (14) produces low energy secondary particles and is effectively cooled by radiation and conduction. A neutron scatterer (44) and a neutron filter (42) are also used for preferentially degrading the secondary particles into a lower energy range if desired.

  20. Method and apparatus for generating low energy nuclear particles

    DOE Patents [OSTI]

    Powell, J.R.; Reich, M.; Ludewig, H.; Todosow, M.

    1999-02-09

    A particle accelerator generates an input particle beam having an initial energy level above a threshold for generating secondary nuclear particles. A thin target is rotated in the path of the input beam for undergoing nuclear reactions to generate the secondary particles and correspondingly decrease energy of the input beam to about the threshold. The target produces low energy secondary particles and is effectively cooled by radiation and conduction. A neutron scatterer and a neutron filter are also used for preferentially degrading the secondary particles into a lower energy range if desired. 18 figs.

  1. Spintronic switches for ultra low energy global interconnects

    SciTech Connect (OSTI)

    Sharad, Mrigank Roy, Kaushik

    2014-05-07

    We present ultra-low energy interconnect design using nano-scale spin-torque (ST) switches for global data-links. Emerging spin-torque phenomena can lead to ultra-low-voltage, high-speed current-mode magnetic-switches. ST-switches can simultaneously provide large trans-impedance gain by employing magnetic tunnel junctions, to convert current-mode signals into large-swing voltage levels. Such device-characteristics can be used in the design of energy-efficient current-mode global interconnects.

  2. Development of multichannel low-energy neutron spectrometer

    SciTech Connect (OSTI)

    Arikawa, Y., E-mail: arikawa-y@ile.osaka-u.ac.jp; Nagai, T.; Abe, Y.; Kojima, S.; Sakata, S.; Inoue, H.; Utsugi, M.; Iwasa, Y.; Sarukura, N.; Nakai, M.; Shiraga, H.; Fujioka, S.; Azechi, H. [Institute of Laser Engineering, Osaka University, 2-6 Yamada-oka, Suita, Osaka (Japan); Murata, T. [Kumamoto University, 2-40-1 Kurokami, Kumamoto 860-8555 (Japan)

    2014-11-15

    A multichannel low-energy neutron spectrometer for down-scattered neutron (DSN) measurements in inertial confinement fusion (ICF) experiments has been developed. Our compact-size 256-channel lithium-glass-scintillator-based spectrometer has been implemented and tested in ICF experiments with the GEKKO XII laser. We have performed time calibration of the 256-channel analog-to-digital convertor system used for DSN measurements via X-ray pulse signals. We have clearly observed the DD-primary fusion neutron signal and have successfully studied the detector's impulse response. Our detector is soon to be implemented in future ICF experiments.

  3. On the Coulomb shifts of nuclear resonances at low energies

    SciTech Connect (OSTI)

    Takibayev, N.

    2005-05-06

    The relationship between the shift of a resonance and the interacion potential is obtained in the frame of coupling constant evolution method. Analysis of the Coulomb shifts of resonance energies and widths has been carried out for nuclear cluster systems at low energies. The nature of these shifts is investigated in the examples of p, {alpha} and p,6Li scatterings. For simplicity a model using separable potentials describing two-body nuclear scattering resonances. The results of the calculation are in accordance with experimental data. In the case of the two {alpha}-particles system the relationship shows that the Coulomb shift of {alpha}, {alpha}-resonance remains small.

  4. Study on electron beam in a low energy plasma focus

    SciTech Connect (OSTI)

    Khan, Muhammad Zubair; Ling, Yap Seong; San, Wong Chiow

    2014-03-05

    Electron beam emission was investigated in a low energy plasma focus device (2.2 kJ) using copper hollow anode. Faraday cup was used to estimate the energy of the electron beam. XR100CR X-ray spectrometer was used to explore the impact of the electron beam on the target observed from top-on and side-on position. Experiments were carried out at optimized pressure of argon gas. The impact of electron beam is exceptionally notable with two different approaches using lead target inside hollow anode in our plasma focus device.

  5. Center for Coal-Derived Low Energy Materials for Sustainable Construction

    SciTech Connect (OSTI)

    Jewell, Robert; Robl, Tom; Rathbone, Robert

    2012-06-30

    The overarching goal of this project was to create a sustained center to support the continued development of new products and industries that manufacture construction materials from coal combustion by-products or CCB’s (e.g., cements, grouts, wallboard, masonry block, fillers, roofing materials, etc). Specific objectives includes the development of a research kiln and associated system and the formulation and production of high performance low-energy, low-CO2 emitting calcium sulfoaluminate (CAS) cement that utilize coal combustion byproducts as raw materials.

  6. Building geothermal research and development partnerships: The California Energy Commission`s geothermal program

    SciTech Connect (OSTI)

    Hare, R.; Tiangco, V.; Birkinshaw, K.; Johannis, M.

    1995-12-31

    The California Energy Commission`s Geothermal Program (Assembly Bill 1905, Bosco) has built cost-shared Research, Development and Demonstration (RD&D) partnerships with over 150 public and private entities. The Geothermal Program promotes the development of new geothermal resources and technologies for both direct-use and electricity generation while protecting the environment and promoting energy independence. This is accomplished by providing financial and technical assistance in the form of contingent awards which, depending on project success, can become either a loan or a grant. Some of the cost-shared RD&D accomplishments are presented. The process and requirements to obtain financial assistance through the Geothermal Program are summarized.

  7. Low energy charged particles interacting with amorphous solid water layers

    SciTech Connect (OSTI)

    Horowitz, Yonatan; Asscher, Micha

    2012-04-07

    The interaction of charged particles with condensed water films has been studied extensively in recent years due to its importance in biological systems, ecology as well as interstellar processes. We have studied low energy electrons (3-25 eV) and positive argon ions (55 eV) charging effects on amorphous solid water (ASW) and ice films, 120-1080 ML thick, deposited on ruthenium single crystal under ultrahigh vacuum conditions. Charging the ASW films by both electrons and positive argon ions has been measured using a Kelvin probe for contact potential difference (CPD) detection and found to obey plate capacitor physics. The incoming electrons kinetic energy has defined the maximum measurable CPD values by retarding further impinging electrons. L-defects (shallow traps) are suggested to be populated by the penetrating electrons and stabilize them. Low energy electron transmission measurements (currents of 0.4-1.5 {mu}A) have shown that the maximal and stable CPD values were obtained only after a relatively slow change has been completed within the ASW structure. Once the film has been stabilized, the spontaneous discharge was measured over a period of several hours at 103 {+-} 2 K. Finally, UV laser photo-emission study of the charged films has suggested that the negative charges tend to reside primarily at the ASW-vacuum interface, in good agreement with the known behavior of charged water clusters.

  8. Development of Low Energy Gap and Fully Regioregular Polythienylenevinylene Derivative

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    David, Tanya M. S.; Zhang, Cheng; Sun, Sam-Shajing

    2014-01-01

    Low energy gap and fully regioregular conjugated polymers find its wide use in solar energy conversion applications. This paper will first briefly review this type of polymers and also report synthesis and characterization of a specific example new polymer, a low energy gap, fully regioregular, terminal functionalized, and processable conjugated polymer poly-(3-dodecyloxy-2,5-thienylene vinylene) or PDDTV. The polymer exhibited an optical energy gap of 1.46 eV based on the UV-vis-NIR absorption spectrum. The electrochemically measured highest occupied molecular orbital (HOMO) level is −4.79 eV, resulting in the lowest unoccupied molecular orbital (LUMO) level of −3.33 eV based on optical energy gap. The polymer wasmore » synthesized via Horner-Emmons condensation and is fairly soluble in common organic solvents such as tetrahydrofuran and chloroform with gentle heating. DSC showed two endothermic peaks at 67°C and 227°C that can be attributed to transitions between crystalline and liquid states. The polymer is thermally stable up to about 300°C. This polymer appears very promising for cost-effective solar cell applications.« less

  9. New Low-Energy Building a Landscape Leader, Too - News Feature...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Facility located on the NREL campus. NREL is part of a team helping to develop a national rating system for landscaping projects. Credit: Heather Lammers Hitting rocky soil while...

  10. Creating high performance buildings: Lower energy, better comfort

    SciTech Connect (OSTI)

    Brager, Gail; Arens, Edward

    2015-03-30

    Buildings play a critical role in the challenge of mitigating and adapting to climate change. It is estimated that buildings contribute 39% of the total U.S. greenhouse gas (GHG) emissions [1] primarily due to their operational energy use, and about 80% of this building energy use is for heating, cooling, ventilating, and lighting. An important premise of this paper is about the connection between energy and comfort. They are inseparable when one talks about high performance buildings. Worldwide data suggests that we are significantly overcooling buildings in the summer, resulting in increased energy use and problems with thermal comfort. In contrast, in naturally ventilated buildings without mechanical cooling, people are comfortable in much warmer temperatures due to shifting expectations and preferences as a result of occupants having a greater degree of personal control over their thermal environment; they have also become more accustomed to variable conditions that closely reflect the natural rhythms of outdoor climate patterns. This has resulted in an adaptive comfort zone that offers significant potential for encouraging naturally ventilated buildings to improve both energy use and comfort. Research on other forms for providing individualized control through low-energy personal comfort systems (desktop fans, foot warmed, and heated and cooled chairs) have also demonstrated enormous potential for improving both energy and comfort performance. Studies have demonstrated high levels of comfort with these systems while ambient temperatures ranged from 6484F. Energy and indoor environmental quality are inextricably linked, and must both be important goals of a high performance building.

  11. Grid-Responsive Buildings

    Broader source: Energy.gov [DOE]

    The U.S.-India Joint Center for Building Energy Research and Development (CBERD) conducts energy efficiency research and development with a focus on integrating information technology with building controls and physical systems for commercial/high-rise residential units.

  12. Building America Webinar: Ventilation in Multifamily Buildings

    Broader source: Energy.gov [DOE]

    This webinar was presented by research team Consortium for Advanced Residential Buildings (CARB), and discussed ventilation strategies for multifamily buildings, including how to successfully implement those strategies through smart design, specification, and construction techniques.

  13. Low-energy theory for superfluid and solid matter and its application...

    Office of Scientific and Technical Information (OSTI)

    Low-energy theory for superfluid and solid matter and its application to the neutron star crust Citation Details In-Document Search Title: Low-energy theory for superfluid and ...

  14. Buildings*","Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    ... "Buildings with Cooling ......",3625,3469,1188,1794,161,52 "Buildings with Water Heating .",3472,3337,999,1765,226,57 "Buildings with Cooking ......",801,764,223,397,68,8 ...

  15. Low-Energy CO2 Capture through Cooperative Adsorption | Center for Gas

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SeparationsRelevant to Clean Energy Technologies | Blandine Jerome Low-Energy CO2 Capture through Cooperative Adsorption

  16. Ignitor with stable low-energy thermite igniting system

    DOE Patents [OSTI]

    Kelly, Michael D. (West Alexandria, OH); Munger, Alan C. (Miamisburg, OH)

    1991-02-05

    A stable compact low-energy igniting system in an ignitor utilizes two components, an initiating charge and an output charge. The initiating charge is a thermite in ultra-fine powder form compacted to 50-70% of theoretical maximum density and disposed in a cavity of a header of the ignitor adjacent to an electrical ignition device, or bridgewire, mounted in the header cavity. The initiating charge is ignitable by operation of the ignition device in a hot-wire mode. The output charge is a thermite in high-density consoladated form compacted to 90-99% of theoretical maximum density and disposed adjacent to the initiating charge on an opposite end thereof from the electrical ignition device and ignitable by the initiating charge. A sleeve is provided for mounting the output charge to the ignitor header with the initiating charge confined therebetween in the cavity.

  17. Buildings","Building Size"

    U.S. Energy Information Administration (EIA) Indexed Site

    ... Cooling ......",58474,4879,6212,9530,8116,9401,7609,6345,6382 "Buildings with Water Heating .",56115,4280,5748,9000,8088,8887,7527,6258,6327 "Buildings with Cooking ...

  18. NREL: Buildings Research - News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    photovoltaic market in 2020. April 17, 2015 NREL and Partners Review Key Issues, Lessons Learned from U.S. Wind Integration Studies and Operating Practices As a complement...

  19. Building America System Research

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... & Tools 4.3: Informing CodeStandards Process 4. Infrastructure Development 1.2: Eff. ... Reduced system risks and costs Knowledge Outreach: Technical support for codes ...

  20. Review of lattice results concerning low-energy particle physics

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Aoki, S.; Aoki, Y.; Bernard, C.; Blum, T.; Colangelo, G.; Della Morte, M.; Dürr, S.; El-Khadra, A. X.; Fukaya, H.; Horsley, R.; et al

    2014-09-01

    We review lattice results related to pion, kaon, D- and B-meson physics with the aim of making them easily accessible to the particle physics community. More specifically, we report on the determination of the light-quark masses, the form factor f+(0), arising in semileptonic K -> pi transition at zero momentum transfer, as well as the decay constant ratio fK/fpi of decay constants and its consequences for the CKM matrix elements Vus and Vud. Furthermore, we describe the results obtained on the lattice for some of the low-energy constants of SU(2)LxSU(2)R and SU(3)LxSU(3)R Chiral Perturbation Theory and review the determination ofmore » the BK parameter of neutral kaon mixing. The inclusion of heavy-quark quantities significantly expands the FLAG scope with respect to the previous review. Therefore, for this review, we focus on D- and B-meson decay constants, form factors, and mixing parameters, since these are most relevant for the determination of CKM matrix elements and the global CKM unitarity-triangle fit. In addition we review the status of lattice determinations of the strong coupling constant alpha_s.« less

  1. Low energy electrons and swift ion track structure in PADC

    SciTech Connect (OSTI)

    Fromm, Michel; Quinto, Michele A.; Weck, Philippe F.; Champion, Christophe

    2015-05-27

    The current work aims at providing an accurate description of the ion track-structure in poly-allyl dyglycol carbonate (PADC) by using an up-to-date Monte-Carlo code-called TILDA-V (a French acronym for Transport d’Ions Lourds Dans l’Aqua & Vivo). In this simulation the ion track-structure in PADC is mainly described in terms of ejected electrons with a particular attention done to the Low Energy Electrons (LEEs). After a brief reminder of the most important channels through which LEEs are prone to break a chemical bond, we will report on the simulated energetic distributions of LEEs along an ion track in PADC for particular incident energies located on both sides of the Bragg-peak position. Lastly, based on the rare data dealing with LEEs interaction with polymers or organic molecules, we will emphasise the role played by the LEEs in the formation of a latent track in PADC, and more particularly the one played by the sub-ionization electrons.

  2. Inelastic pion scattering by /sup 13/C at low energies

    SciTech Connect (OSTI)

    Mitchell, J.H.

    1987-03-01

    Angular distributions for inelastically scattered pions were obtained for several states in /sup 13/C at an incident energy of 65 MeV. The data include results from both ..pi../sup +/ and ..pi../sup -/ measurements. In addition, ..pi../sup -/ measurements were made at T/sub ..pi../ = 50 MeV at one angle to give a two point fixed-q excitation function. The data are compared to theory and the data of others. As might be expected, medium corrections are shown to be considerably more important at low energies than at resonance. This is true for inelastic transitions of multipolarity 0,2 and 3. Parameters derived from an analysis of elastic pion scattering and SCX data also provide an adequate description of the inelastic transitions. The charge asymmetry in the cross sections for the 9/2/sup +/ state that was seen at resonance persists at these energies. This result is consistent with an impulse approximation treatment of the spin-flip amplitude. This is true even though the incoming energy of the pions is far below the range where the validity of an impulse treatment is expected. 65 refs., 45 figs.

  3. Maximum Likelihood Analysis of Low Energy CDMS II Germanium Data

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Agnese, R.

    2015-03-30

    We report on the results of a search for a Weakly Interacting Massive Particle (WIMP) signal in low-energy data of the Cryogenic Dark Matter Search experiment using a maximum likelihood analysis. A background model is constructed using GEANT4 to simulate the surface-event background from Pb210decay-chain events, while using independent calibration data to model the gamma background. Fitting this background model to the data results in no statistically significant WIMP component. In addition, we also perform fits using an analytic ad hoc background model proposed by Collar and Fields, who claimed to find a large excess of signal-like events in ourmore » data. Finally, we confirm the strong preference for a signal hypothesis in their analysis under these assumptions, but excesses are observed in both single- and multiple-scatter events, which implies the signal is not caused by WIMPs, but rather reflects the inadequacy of their background model.« less

  4. Low energy electrons and swift ion track structure in PADC

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Fromm, Michel; Quinto, Michele A.; Weck, Philippe F.; Champion, Christophe

    2015-05-27

    The current work aims at providing an accurate description of the ion track-structure in poly-allyl dyglycol carbonate (PADC) by using an up-to-date Monte-Carlo code-called TILDA-V (a French acronym for Transport d’Ions Lourds Dans l’Aqua & Vivo). In this simulation the ion track-structure in PADC is mainly described in terms of ejected electrons with a particular attention done to the Low Energy Electrons (LEEs). After a brief reminder of the most important channels through which LEEs are prone to break a chemical bond, we will report on the simulated energetic distributions of LEEs along an ion track in PADC for particularmore » incident energies located on both sides of the Bragg-peak position. Lastly, based on the rare data dealing with LEEs interaction with polymers or organic molecules, we will emphasise the role played by the LEEs in the formation of a latent track in PADC, and more particularly the one played by the sub-ionization electrons.« less

  5. Building America FY14 Projects by Building Type | Department of Energy

    Energy Savers [EERE]

    Projects by Building Type Building America FY14 Projects by Building Type This table lists U.S. Department of Energy Building America FY14 research projects by building type. PDF icon building_america_fy14projects_bldgtype.pdf More Documents & Publications Building America FY14 Research Projects by Research Team

  6. Building Energy Modeling Overview - 2015 BTO Peer Review | Department...

    Energy Savers [EERE]

    The building has an advanced ventilated double facade and uses low-energy underfloor air distribution and is designed to achieve energy savings of 30% below code.
    Image ...

  7. Building Energy Modeling Overview - 2014 BTO Peer Review | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The building has an advanced ventilated double facade and uses low-energy underfloor air distribution and is designed to achieve energy savings of 30% below code.
    Image ...

  8. Building Design & Construction - Sustainability

    SciTech Connect (OSTI)

    2003-11-01

    Offers a brief history of green building; presents the results of a specially commissioned survey; and analyzes the chief trends, issues, and published research, based on interviews with dozens of experts and participants in green building.

  9. Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in the Hot-Dry and Mixed-Dry Climates

    SciTech Connect (OSTI)

    Building Industry Research Alliance; Building Science Consortium; Consortium for Advanced Residential Buildings; Davis Energy Group; Florida Solar Energy Center; IBACOS; National Association of Home Builders Research Center; National Renewable Energy Laboratory

    2006-01-01

    The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Hot-Dry/Mixed-Dry Climate Region on a cost neutral basis.

  10. Building America Top Innovations 2013 Profile Building America Solution Center

    SciTech Connect (OSTI)

    none,

    2013-09-01

    This Top Innovation profile provides information about the Building America Solution Center created by Pacific Northwest National Laboratory, a web tool connecting users to thousands of pieces of building science information developed by DOEs Building America research partners.

  11. Building America Top Innovations 2013 Profile Building America Solution Center

    Broader source: Energy.gov [DOE]

    PNNL set up the framework for the Building America Solution Center, a web tool connecting users to thousands of pieces of building science information developed by DOEs Building America research partners.

  12. Information Content of the Low-Energy Electric Dipole Strength: Correlation

    Office of Scientific and Technical Information (OSTI)

    Analysis (Journal Article) | SciTech Connect Information Content of the Low-Energy Electric Dipole Strength: Correlation Analysis Citation Details In-Document Search Title: Information Content of the Low-Energy Electric Dipole Strength: Correlation Analysis Background: Recent experiments on the electric dipole (E1) polarizability in heavy nuclei have stimulated theoretical interest in the low-energy electric dipole strength, both isovector and isoscalar. Purpose: We study the information

  13. A computer simulation appraisal of non-residential low energy cooling systems in California

    SciTech Connect (OSTI)

    Bourassa, Norman; Haves, Philip; Huang, Joe

    2002-05-17

    An appraisal of the potential performance of different Low Energy Cooling (LEC) systems in nonresidential buildings in California is being conducted using computer simulation. The paper presents results from the first phase of the study, which addressed the systems that can be modeled, with the DOE-2.1E simulation program. The following LEC technologies were simulated as variants of a conventional variable-air-volume system with vapor compression cooling and mixing ventilation in the occupied spaces: Air-side indirect and indirect/direct evaporative pre-cooling. Cool beams. Displacement ventilation. Results are presented for four populous climates, represented by Oakland, Sacramento, Pasadena and San Diego. The greatest energy savings are obtained from a combination of displacement ventilation and air-side indirect/direct evaporative pre-cooling. Cool beam systems have the lowest peak demand but do not reduce energy consumption significantly because the reduction in fan energy is offse t by a reduction in air-side free cooling. Overall, the results indicate significant opportunities for LEC technologies to reduce energy consumption and demand in nonresidential new construction and retrofit.

  14. Building America Solution Center - Building America Top Innovation |

    Energy Savers [EERE]

    Department of Energy Building America Solution Center - Building America Top Innovation Building America Solution Center - Building America Top Innovation SC_image_male.jpg The Building America Solution Center is a Web-based tool connecting users to fast, free, and expert building science and energy efficiency information based on Building America research results. The Pacific Northwest National Laboratory garnered a 2013 Top Innovation award for this tool, which delivers resources on

  15. Building Technologies Program Key Activities

    SciTech Connect (OSTI)

    2011-12-15

    The Building Technologies Program (BTP) employs a balanced approach to making buildings more energy efficient. The three pillars of our program, research and development (R&D), market stimulation, and building and equipment standards, help meet our strategic vision.

  16. Numerical simulations for low energy nuclear reactions including...

    Office of Scientific and Technical Information (OSTI)

    Resource Relation: Conference: Consultants Meeting on Recommended Input Parameters for Fission Cross-Section Calculation ; 2013-12-17 - 2013-12-18 ; Vienna, Austria Research Org: ...

  17. Prospects for achieving high dynamic compression with low energy...

    Office of Scientific and Technical Information (OSTI)

    Number: W-7405-ENG-48 Resource Type: Journal Article Resource Relation: Journal Name: Applied Physics Letters, vol. 101, na, September 5, 2012, pp. 101904 Research Org: Lawrence...

  18. Advanced Load Identification and Management for Buildings: Cooperative Research and Development Final Report, CRADA Number: CRD-11-422

    SciTech Connect (OSTI)

    Gentile-Polese, L.

    2014-05-01

    The goal of this CRADA work is to support Eaton Innovation Center (Eaton) efforts to develop advanced load identification, management technologies, and solutions to reduce building energy consumption by providing fine granular visibility of energy usage information and safety protection of miscellaneous electric loads (MELs) in commercial and residential buildings. MELs load identification and prediction technology will be employed in a novel 'Smart eOutlet*' to provide critical intelligence and information to improve the capability and functionality of building load analysis and design tools and building power management systems. The work scoped in this CRADA involves the following activities: development and validation of business value proposition for the proposed technologies through voice of customer investigation, market analysis, and third-party objective assessment; development and validation of energy saving impact as well as assessment of environmental and economic benefits; 'smart eOutlet' concept design, prototyping, and validation; field validation of the developed technologies in real building environments. (*Another name denoted as 'Smart Power Strip (SPS)' will be used as an alternative of the name 'Smart eOutlet' for a clearer definition of the product market position in future work.)

  19. Research Projects | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Projects Nuclear Computational Low Energy Initiative (NUCLEI) Kinetic Theory of Turbulent Multiphase Flow Chemical Analysis of Nanodomains Chemical Physics Homogeneous and...

  20. Imaging doped silicon test structures using low energy electron microscopy.

    SciTech Connect (OSTI)

    Nakakura, Craig Yoshimi; Anderson, Meredith Lynn; Kellogg, Gary Lee

    2010-01-01

    This document is the final SAND Report for the LDRD Project 105877 - 'Novel Diagnostic for Advanced Measurements of Semiconductor Devices Exposed to Adverse Environments' - funded through the Nanoscience to Microsystems investment area. Along with the continuous decrease in the feature size of semiconductor device structures comes a growing need for inspection tools with high spatial resolution and high sample throughput. Ideally, such tools should be able to characterize both the surface morphology and local conductivity associated with the structures. The imaging capabilities and wide availability of scanning electron microscopes (SEMs) make them an obvious choice for imaging device structures. Dopant contrast from pn junctions using secondary electrons in the SEM was first reported in 1967 and more recently starting in the mid-1990s. However, the serial acquisition process associated with scanning techniques places limits on the sample throughput. Significantly improved throughput is possible with the use of a parallel imaging scheme such as that found in photoelectron emission microscopy (PEEM) and low energy electron microscopy (LEEM). The application of PEEM and LEEM to device structures relies on contrast mechanisms that distinguish differences in dopant type and concentration. Interestingly, one of the first applications of PEEM was a study of the doping of semiconductors, which showed that the PEEM contrast was very sensitive to the doping level and that dopant concentrations as low as 10{sup 16} cm{sup -3} could be detected. More recent PEEM investigations of Schottky contacts were reported in the late 1990s by Giesen et al., followed by a series of papers in the early 2000s addressing doping contrast in PEEM by Ballarotto and co-workers and Frank and co-workers. In contrast to PEEM, comparatively little has been done to identify contrast mechanisms and assess the capabilities of LEEM for imaging semiconductor device strictures. The one exception is the work of Mankos et al., who evaluated the impact of high-throughput requirements on the LEEM designs and demonstrated new applications of imaging modes with a tilted electron beam. To assess its potential as a semiconductor device imaging tool and to identify contrast mechanisms, we used LEEM to investigate doped Si test structures. In section 2, Imaging Oxide-Covered Doped Si Structures Using LEEM, we show that the LEEM technique is able to provide reasonably high contrast images across lateral pn junctions. The observed contrast is attributed to a work function difference ({Delta}{phi}) between the p- and n-type regions. However, because the doped regions were buried under a thermal oxide ({approx}3.5 nm thick), e-beam charging during imaging prevented quantitative measurements of {Delta}{phi}. As part of this project, we also investigated a series of similar test structures in which the thermal oxide was removed by a chemical etch. With the oxide removed, we obtained intensity-versus-voltage (I-V) curves through the transition from mirror to LEEM mode and determined the relative positions of the vacuum cutoffs for the differently doped regions. Although the details are not discussed in this report, the relative position in voltage of the vacuum cutoffs are a direct measure of the work function difference ({Delta}{phi}) between the p- and n-doped regions.

  1. An annotated bibliography of completed and in-progress behavioral research for the Office of Buildings and Community Systems. [About 1000 items, usually with abstracts

    SciTech Connect (OSTI)

    Weijo, R.O.; Roberson, B.F.; Eckert, R.; Anderson, M.R.

    1988-05-01

    This report provides an annotated bibliography of completed and in-progress consumer decision research useful for technology transfer and commercialization planning by the US Department of Energy's (DOE) Office of Buildings and Community Systems (OBCS). This report attempts to integrate the consumer research studies conducted across several public and private organizations over the last four to five years. Some of the sources of studies included in this annotated bibliography are DOE National Laboratories, public and private utilities, trade associations, states, and nonprofit organizations. This study divides the articles identified in this annotated bibliography into sections that are consistent with or similar to the system of organization used by OBCS.

  2. BUILDING AMERICA PROGRAM EVALUATION

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... design housing, build based on these designs, and ... system. This system involves multiple steps: ... or through the collaborative research to improve the overall ...

  3. Buildings Energy Data Book

    Buildings Energy Data Book [EERE]

    1.1 Buildings Sector Energy Consumption 1.2 Building Sector Expenditures 1.3 Value of Construction and Research 1.4 Environmental Data 1.5 Generic Fuel Quad and Comparison 1.6 Embodied Energy of Building Assemblies 2The Residential Sector 3Commercial Sector 4Federal Sector 5Envelope and Equipment 6Energy Supply 7Laws, Energy Codes, and Standards 8Water 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy

  4. Building America Webinar: Saving Energy in Multifamily Buildings |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Saving Energy in Multifamily Buildings Building America Webinar: Saving Energy in Multifamily Buildings This webinar introduced the Building America team Partnership for Advanced Residential Retrofit (PARR) and its partners, outlined team objectives, and highlighted their current research program, Energy Savers. File webinar_multifamily_bldgs_20110726.wmv More Documents & Publications Building America Webinar: Retrofit Ventilation Strategies in Multifamily Buildings

  5. Industrial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Industrial Industrial Manufacturing Buildings Industrialmanufacturing buildings are not considered commercial, but are covered by the Manufacturing Energy Consumption Survey...

  6. Biological assessments for the low energy demonstration accelerator, 1996 and 1997

    SciTech Connect (OSTI)

    Cross, S.

    1998-12-31

    The Department of Energy (DOE) plans to build, install, and operate a Low Energy Demonstration Accelerator (LMA) in Technical Area 53 of the Los Alamos National Laboratory (LANL). LEDA will demonstrate the accelerator technology necessary to produce tritium, but is not designed to produce tritium at LANL. USFWS reviewers of the Biological Assessment prepared for LEDA insisted that the main drainage be monitored to measure and document changes to vegetation, soils, wildlife, and habitats due to LEDA effluent discharges. The Biology Team of ESH-20 (LANL`s Ecology Group) has performed these monitoring activities during 1996 and 1997 to document baseline conditions before LEDA released significant effluent discharges. Quarterly monitoring of the outfall which will discharge LEDA blowdown effluent had one exceedance of permitted parameters, a high chlorine discharge that was quickly remedied. Samples from 12 soil pits in the drainage area contained no hydric indicators, such as organic matter in the upper layers, streaking, organic pans, and oxidized rhizospheres. Vegetation transacts in the meadows that LEDA discharges will flow through contained 44 species of herbaceous plants, all upland taxa. Surveys of resident birds, reptiles, and amphibians documented a fauna typical of local dry canyons. No threatened or endangered species inhabit the project area, but increased effluent releases may make the area more attractive to many wildlife species, an endangered raptor, and several other species of concern. Biological best management practices especially designed for LEDA are discussed, including protection of floodplains, erosion control measures, hazards posed by increased usage of the area by deer and elk and revegetation of disturbed areas.

  7. Building America Webinar: Building America Technology-to-Market Roadmaps |

    Energy Savers [EERE]

    Department of Energy Technology-to-Market Roadmaps Building America Webinar: Building America Technology-to-Market Roadmaps This webinar introduced the integrated Building America Technology-to-Market Roadmaps that will serve as a guide for Building America's research, development, and demonstration activities over the coming years and result in an integrated Building America Research-to-Market Plan in 2015. This webinar also provided information about the Request for Information that was

  8. A new detector for mass spectrometry: Direct detection of low energy ions

    Office of Scientific and Technical Information (OSTI)

    using a multi-pixel photon counter (Journal Article) | SciTech Connect A new detector for mass spectrometry: Direct detection of low energy ions using a multi-pixel photon counter Citation Details In-Document Search Title: A new detector for mass spectrometry: Direct detection of low energy ions using a multi-pixel photon counter A new type of ion detector for mass spectrometry and general detection of low energy ions is presented. The detector consists of a scintillator optically coupled to

  9. Buildings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Buildings Buildings EERE leads a robust network of researchers and other partners to continually develop cost-effective energy-saving solutions that help make our country run better through increased efficiency — promoting better plants, manufacturing processes, and products; more efficient new homes and improved older homes; and other solutions to enhance the buildings in which we work, shop, and lead our everyday lives. EERE leads a robust network of researchers and other partners to

  10. $18.8 Million Award for Power Systems Engineering Research Center Continues Collaboration of 13 Universities and 35 Utilities for Electric Power Research, Building the Nation's Energy Workforce

    Broader source: Energy.gov [DOE]

    The Department of Energy awarded a cooperative agreement on January 16, 2009, to the Arizona State University (ASU) Board of Regents to operate the Power Systems Engineering Research Center (PSERC). PSERC is a collaboration of 13 universities with 35 electricity industry member organizations including utilities, transmission companies, vendors and research organizations.

  11. 2014-09-30 Issuance: Buildings-to-Grid Integration and Related Areas of Research; Notice of Availability and Request for Public Comment

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register notice of availability and request for public comment regarding buildings-to-grid integration and related areas of research, as issued by the Deputy Assistant Secretary for Energy Efficiency on September 30, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

  12. Low-energy planar magnetic defects in BaFe2As2: Nanotwins, twins...

    Office of Scientific and Technical Information (OSTI)

    twins, antiphase, and domain boundaries Citation Details In-Document Search Title: Low-energy planar magnetic defects in BaFe2As2: Nanotwins, twins, antiphase, and domain...

  13. Precision shape modification of nanodevices with a low-energy electron beam

    DOE Patents [OSTI]

    Zettl, Alex; Yuzvinsky, Thomas David; Fennimore, Adam

    2010-03-09

    Methods of shape modifying a nanodevice by contacting it with a low-energy focused electron beam are disclosed here. In one embodiment, a nanodevice may be permanently reformed to a different geometry through an application of a deforming force and a low-energy focused electron beam. With the addition of an assist gas, material may be removed from the nanodevice through application of the low-energy focused electron beam. The independent methods of shape modification and material removal may be used either individually or simultaneously. Precision cuts with accuracies as high as 10 nm may be achieved through the use of precision low-energy Scanning Electron Microscope scan beams. These methods may be used in an automated system to produce nanodevices of very precise dimensions. These methods may be used to produce nanodevices of carbon-based, silicon-based, or other compositions by varying the assist gas.

  14. Solving The Long-Standing Problem Of Low-Energy Nuclear Reactions...

    Office of Scientific and Technical Information (OSTI)

    Energy Nuclear Reactions At The Highest Microscopic Level:Annual Continuation And Progress ... Title: Solving The Long-Standing Problem Of Low-Energy Nuclear Reactions At The Highest ...

  15. EIS-0350: Final Environmental Impact Statement for the Chemistry and Metallurgy Research Building Replacement Project at Los Alamos National Laboratory Los Alamos, New Mexico

    Broader source: Energy.gov [DOE]

    The CMRR EIS examines the potential environmental impacts associated with the Proposed Action of consolidating and relocating the mission-critical CMR capabilities from a degraded building to a new modern building(s).

  16. Low-energy collective modes of deformed superfluid nuclei within the

    Office of Scientific and Technical Information (OSTI)

    finite-amplitude method (Journal Article) | SciTech Connect Low-energy collective modes of deformed superfluid nuclei within the finite-amplitude method Citation Details In-Document Search Title: Low-energy collective modes of deformed superfluid nuclei within the finite-amplitude method Authors: Hinohara, Nobuo ; Kortelainen, Markus ; Nazarewicz, Witold Publication Date: 2013-06-17 OSTI Identifier: 1103819 Type: Publisher's Accepted Manuscript Journal Name: Physical Review C Additional

  17. Low-energy theory for superfluid and solid matter and its application to

    Office of Scientific and Technical Information (OSTI)

    the neutron star crust (Journal Article) | SciTech Connect Low-energy theory for superfluid and solid matter and its application to the neutron star crust Citation Details In-Document Search Title: Low-energy theory for superfluid and solid matter and its application to the neutron star crust Authors: Cirigliano, Vincenzo ; Reddy, Sanjay ; Sharma, Rishi Publication Date: 2011-10-27 OSTI Identifier: 1101046 Type: Publisher's Accepted Manuscript Journal Name: Physical Review C Additional

  18. Novel Ultra-Low-Energy Consumption Ultrasonic Clothes Dryer | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Ultra-Low-Energy Consumption Ultrasonic Clothes Dryer Novel Ultra-Low-Energy Consumption Ultrasonic Clothes Dryer Watch the ultrasonic technology dry a piece of fabric in 14 seconds. Oak Ridge National Lab's Ayyoub Momen demonstrates ultrasonic clothes dryer technology for David Danielson, Assistant Secretary for Energy Efficiency and Renewable Energy (EERE) Oak Ridge National Lab's Ayyoub Momen demonstrates ultrasonic clothes dryer technology for David Danielson, Assistant Secretary

  19. EIS-0350-S1: Supplemental Environmental Impact Statement for the Nuclear Facility Portion of the Chemistry and Metallurgy Research Building Replacement Project at Los Alamos National Laboratory, New Mexico

    Broader source: Energy.gov [DOE]

    This Supplemental EIS evaluates the completion of the Chemistry and Metallurgy Research Building Replacement (CMRR) Project, which consists of constructing the nuclear facility portion (CMRR-NF) at Los Alamos National Laboratory (LANL). The CMRR Project provides the analytical chemistry and materials characterization capabilities currently or previously performed in the existing Chemistry and Metallurgy Research (CMR) Building. Because of recent detailed site geotechnical investigations, certain aspects of the CMRR-NR project have changed resulting in change to the environmental impacts.

  20. Better Buildings Neighborhood Program | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Neighborhood Program Better Buildings Neighborhood Program Residential Buildings Integration Project for the 2013 Building Technologies Office's Program Peer Review PDF icon resbldgs03_roberts_040313.pdf More Documents & Publications Buildings Performance Database - 2013 BTO Peer Review Building America System Research Energy Management Systems Package for Small Commercial Buildings

  1. Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Marine Climates; January 2006 - December 2006

    SciTech Connect (OSTI)

    Anderson, R.; Hendron, R.; Eastment, M.; Jalalzadeh-Azar, A.

    2006-12-01

    This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Marine Climate Region on a cost-neutral basis.

  2. Past Building America Projects | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Past Building America Projects Past Building America Projects Building America research projects are completed by industry consortia (teams) comprised of leading experts from across the country. This page provides an overview of the past projects, team members, and areas of focus. Learn about current Building America teams and projects. Advanced Residential Integrated Energy Solutions Alliance for Residential Building Innovation Building America Research Alliance Building America Partnership for

  3. Particle deposition from turbulent flow: Review of published research and its applicability to ventilation ducts in commercial buildings

    SciTech Connect (OSTI)

    Sippola, Mark R.; Nazaroff, William W.

    2002-06-01

    This report reviews published experimental and theoretical investigations of particle deposition from turbulent flows and considers the applicability of this body of work to the specific case of particle deposition from flows in the ducts of heating, ventilating and air conditioning (HVAC) systems. Particle deposition can detrimentally affect the performance of HVAC systems and it influences the exposure of building occupants to a variety of air pollutants. The first section of this report describes the types of HVAC systems under consideration and discusses the components, materials and operating parameters commonly found in these systems. The second section reviews published experimental investigations of particle deposition rates from turbulent flows and considers the ramifications of the experimental evidence with respect to HVAC ducts. The third section considers the structure of turbulent airflows in ventilation ducts with a particular emphasis on turbulence investigations that have been used as a basis for particle deposition models. The final section reviews published literature on predicting particle deposition rates from turbulent flows.

  4. Low-Cost Ventilation in Production Housing - Building America...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This Top Innovation profile describes Building America research by Building Science ... Find more case studies of Building America projects across the country that demonstrate ...

  5. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    normal leakage paths through the building envelope disappear. This research effort by the Building America team, Consortium for Advanced Residential Buildings, evaluated four...

  6. Mercantile Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Mercantile Characteristics by Activity... Mercantile Mercantile buildings are those used for the sale and display of goods other than food (buildings used for the sales of food are...

  7. Education Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Education Characteristics by Activity... Education Education buildings are buildings used for academic or technical classroom instruction, such as elementary, middle, or high...

  8. Better Buildings

    Broader source: Energy.gov [DOE]

    The Better Buildings Initiative aims to make commercial and industrial buildings 20% more energy efficient by 2020 and accelerate private sector investment in energy efficiency.

  9. Public Interest Energy Research (PIER) Program. Final Project Report. California Energy Balance Update and Decomposition Analysis for the Industry and Building Sectors

    SciTech Connect (OSTI)

    de la Rue du Can, Stephane; Hasanbeigi, Ali; Sathaye, Jayant

    2010-12-01

    This report on the California Energy Balance version 2 (CALEB v2) database documents the latest update and improvements to CALEB version 1 (CALEB v1) and provides a complete picture of how energy is supplied and consumed in the State of California. The CALEB research team at Lawrence Berkeley National Laboratory (LBNL) performed the research and analysis described in this report. CALEB manages highly disaggregated data on energy supply, transformation, and end-use consumption for about 40 different energy commodities, from 1990 to 2008. This report describes in detail California's energy use from supply through end-use consumption as well as the data sources used. The report also analyzes trends in energy demand for the "Manufacturing" and "Building" sectors. Decomposition analysis of energy consumption combined with measures of the activity driving that consumption quantifies the effects of factors that shape energy consumption trends. The study finds that a decrease in energy intensity has had a very significant impact on reducing energy demand over the past 20 years. The largest impact can be observed in the industry sector where energy demand would have had increased by 358 trillion British thermal units (TBtu) if subsectoral energy intensities had remained at 1997 levels. Instead, energy demand actually decreased by 70 TBtu. In the "Building" sector, combined results from the "Service" and "Residential" subsectors suggest that energy demand would have increased by 264 TBtu (121 TBtu in the "Services" sector and 143 TBtu in the "Residential" sector) during the same period, 1997 to 2008. However, energy demand increased at a lesser rate, by only 162 TBtu (92 TBtu in the "Services" sector and 70 TBtu in the "Residential" sector). These energy intensity reductions can be indicative of energyefficiency improvements during the past 10 years. The research presented in this report provides a basis for developing an energy-efficiency performance index to measure progress over time in the State of California.

  10. Building America Webinar: Building America Technology-to-Market Roadmaps

    Broader source: Energy.gov [DOE]

    This free webinar will introduce the integrated Building America Technology-to-Market Roadmaps that will serve as a guide for Building America’s research, development, and demonstration activities...

  11. Unvented, Conditioned Crawlspaces - Building America Top Innovation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This Top Innovation profile highlights Building America research into the benefits of ... Find more case studies of Building America projects across the country that demonstrate ...

  12. Vapor Retarder Classification - Building America Top Innovation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This Top Innovation profile describes Building America research that established vapor ... Find other case studies of Building America projects across the country that utilizes ...

  13. Design of the Proposed Low Energy Ion Collider Ring at Jefferson Lab

    SciTech Connect (OSTI)

    Nissen, Edward W.; Lin, Fanglei; Morozov, Vasiliy; Zhang, Yuhong

    2013-06-01

    The polarized Medium energy Electron-Ion Collider (MEIC) envisioned at Jefferson Lab will cover a range of center-of-mass energies up to 65 GeV. The present MEIC design could also allow the accommodation of low energy electron-ion collisions (LEIC) for additional science reach. This paper presents the first design of the low energy ion collider ring which is converted from the large ion booster of MEIC. It can reach up to 25 GeV energy for protons and equivalent ion energies of the same magnetic rigidity. An interaction region and an electron cooler designed for MEIC are integrated into the low energy collider ring, in addition to other required new elements including crab cavities and ion spin rotators, for later reuse in MEIC itself. A pair of vertical chicanes which brings the low energy ion beams to the plane of the electron ring and back to the low energy ion ring are also part of the design.

  14. Microscopic model versus systematic low-energy effective field theory for a doped quantum ferromagnet

    SciTech Connect (OSTI)

    Gerber, U.; Wiese, U.-J.; Hofmann, C. P.; Kaempfer, F.

    2010-02-01

    We consider a microscopic model for a doped quantum ferromagnet as a test case for the systematic low-energy effective field theory for magnons and holes, which is constructed in complete analogy to the case of quantum antiferromagnets. In contrast to antiferromagnets, for which the effective field theory approach can be tested only numerically, in the ferromagnetic case, both the microscopic and the effective theory can be solved analytically. In this way, the low-energy parameters of the effective theory are determined exactly by matching to the underlying microscopic model. The low-energy behavior at half-filling as well as in the single- and two-hole sectors is described exactly by the systematic low-energy effective field theory. In particular, for weakly bound two-hole states the effective field theory even works beyond perturbation theory. This lends strong support to the quantitative success of the systematic low-energy effective field theory method not only in the ferromagnetic but also in the physically most interesting antiferromagnetic case.

  15. Integrative Genomics Building

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Integrative Genomics Building Community Berkeley Global Campus Environmental Documents Tours Community Programs Friends of Berkeley Lab ⇒ Navigate Section Community Berkeley Global Campus Environmental Documents Tours Community Programs Friends of Berkeley Lab Project Description The Integrative Genomics Building (IGB) is proposed to be an approximately 77,000 gsf, four-story research and office building constructed in the former Bevatron area - a fully developed site in the geographic

  16. Small Buildings and Small Portfolios

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Small Buildings and Small Portfolios 2014 Building Technologies Office Peer Review Glenn Schatz, glenn.schatz@ee.doe.gov Commercial Buildings Integration Small Commercial Buildings in the United States 2 Small Commercial Buildings in the United States 3 What are the Challenges? The largest reported barriers inhibiting SBSP owners from adopting energy efficiency solutions: - Limited capital - Higher transaction costs relative to energy cost savings - Lack of time to research and implement energy

  17. Small Buildings and Small Portfolios

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cody Taylor, cody.taylor@ee.doe.gov Commercial Buildings Integration Small Buildings and Small Portfolios 2014 Building Technologies Office Peer Review 2 Small Commercial Buildings in the United States 3 Small Commercial Buildings in the United States 4 What are the Challenges? The largest reported barriers inhibiting SBSP owners from adopting energy efficiency solutions: - Limited capital - Higher transaction costs relative to energy cost savings - Lack of time to research and implement energy

  18. About the Building Technologies Program

    SciTech Connect (OSTI)

    2011-12-15

    The Building Technologies Program (BTP) actively pursues the research, development, and adoption of technologies and strategies that advance the energy efficiency of U.S. commercial and residential buildings.

  19. The Home Depot Upgrades its Corporate Building Prototype

    SciTech Connect (OSTI)

    none,

    2013-03-01

    The Home Depot partnered with the Department of Energy (DOE) to develop and implement solutions to build new, low-energy buildings that are at least 50% below Standard 90.1-2007 of the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE), the American National Standards Institute (ANSI), and the Illuminating Engineering Society of North America (IESNA) as part of DOEs Commercial Building Partnerships (CBP) Program.

  20. Building Technologies Office

    Broader source: Energy.gov [DOE]

    The Building Technologies Office (BTO) leads a vast network of research and industry partners to continually develop innovative, cost-effective energy saving solutionsbetter products, better new homes, better ways to improve older homes, and better buildings in which we work, shop, and lead our everyday lives.

  1. Low energy detectors: 6Li-glass scintillators (Conference) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Low energy detectors: 6Li-glass scintillators Citation Details In-Document Search Title: Low energy detectors: 6Li-glass scintillators Authors: Lee, Hye Young [1] ; Taddeucci, Terry N [1] + Show Author Affiliations Los Alamos National Laboratory Publication Date: 2012-03-22 OSTI Identifier: 1178711 Report Number(s): LA-UR-12-01482; LA-UR-12-1482 DOE Contract Number: AC52-06NA25396 Resource Type: Conference Resource Relation: Conference: Fission Workshop ; March 8, 2012 ; Los Alamos,

  2. Electron Polarimetry at Low Energies in Hall C at Jefferson Lab

    SciTech Connect (OSTI)

    Gaskell, David J.

    2013-11-01

    Although the majority of Jefferson Lab experiments require multi-GeV electron beams, there have been a few opportunities to make electron beam polarization measurements at rather low energies. This proceedings will discuss some of the practical difficulties encountered in performing electron polarimetry via Mo/ller scattering at energies on the order of a few hundred MeV. Prospects for Compton polarimetry at very low energies will also be discussed. While Mo/ller scattering is likely the preferred method for electron polarimetry at energies below 500 MeV, there are certain aspects of the polarimeter and experiment design that must be carefully considered.

  3. Low energy antineutrino detection using neutrino capture on electron capture decaying nuclei

    SciTech Connect (OSTI)

    Cocco, Alfredo G.; Mangano, Gianpiero; Messina, Marcello

    2009-03-01

    In this paper we present a study of the interaction of a low energy electron antineutrino on nuclei that undergo electron capture. We show that the two corresponding crossed reactions have a sizable cross section and are both suitable for detection of low energy antineutrino. However, only in the case where very specific conditions on the Q value of the decay are met or significant improvements on the performances of ion storage rings are achieved, these reactions could be exploited in the future to address the long standing problem of a direct detection of cosmological neutrino background.

  4. Commercial Reference Buildings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reference Buildings Commercial Reference Buildings The U.S. Department of Energy (DOE), in conjunction with three of its national laboratories, developed commercial reference buildings, formerly known as commercial building benchmark models. These reference buildings play a critical role in the program's energy modeling software research by providing complete descriptions for whole building energy analysis using EnergyPlus simulation software. There are 16 building types that represent

  5. DOE Announces Webinars on Buildings of the Future, Building America

    Office of Environmental Management (EM)

    Research Tools, and More | Department of Energy Building America Research Tools, and More DOE Announces Webinars on Buildings of the Future, Building America Research Tools, and More March 12, 2015 - 8:37am Addthis EERE offers webinars to the public on a range of subjects, from adopting the latest energy efficiency and renewable energy technologies, to training for the clean energy workforce. Webinars are free; however, advanced registration is typically required. You can also watch archived

  6. Modeling Proton- and Light Ion-Induced Reactions at Low Energies in the MARS15 Code

    SciTech Connect (OSTI)

    Rakhno, I. L.; Mokhov, N. V.; Gudima, K. K.

    2015-04-25

    An implementation of both ALICE code and TENDL evaluated nuclear data library in order to describe nuclear reactions induced by low-energy projectiles in the Monte Carlo code MARS15 is presented. Comparisons between results of modeling and experimental data on reaction cross sections and secondary particle distributions are shown.

  7. Energy Use Intensity and its Influence on the Integrated Daylighting Design of a Large Net Zero Energy Building: Preprint

    SciTech Connect (OSTI)

    Guglielmetti , R.; Scheib, J.; Pless, S. D.; Torcellini , P.; Petro, R.

    2011-03-01

    Net-zero energy buildings generate as much energy as they consume and are significant in the sustainable future of building design and construction. The role of daylighting (and its simulation) in the design process becomes critical. In this paper we present the process the National Renewable Energy Laboratory embarked on in the procurement, design, and construction of its newest building, the Research Support Facility (RSF) - particularly the roles of daylighting, electric lighting, and simulation. With a rapid construction schedule, the procurement, design, and construction had to be tightly integrated; with low energy use. We outline the process and measures required to manage a building design that could expect to operate at an efficiency previously unheard of for a building of this type, size, and density. Rigorous simulation of the daylighting and the electric lighting control response was a given, but the oft-ignored disconnect between lighting simulation and whole-building energy use simulation had to be addressed. The RSF project will be thoroughly evaluated for its performance for one year; preliminary data from the postoccupancy monitoring efforts will also be presented with an eye toward the current efficacy of building energy and lighting simulation.

  8. Building America Top Innovations Hall of Fame Profile … Outside...

    Energy Savers [EERE]

    Building America program was started in 1995 to provide research and development to ... Building America research showed automated night ventilation can reduce cooling energy costs ...

  9. Building America Top Innovations | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research » Building America Top Innovations Building America Top Innovations New Top Innovations are awarded annually for outstanding Building America research achievements. Each year, Building America selects cutting-edge Top Innovations that demonstrate the value of investing in high-performance research and development and guide the industry toward more energy-efficient, healthier, and longer lasting homes. Building America Top Innovations align with and support every aspect of the home

  10. Building technologies

    SciTech Connect (OSTI)

    Jackson, Roderick

    2014-07-14

    After growing up on construction sites, Roderick Jackson is now helping to make buildings nationwide far more energy efficient.

  11. Building technologies

    ScienceCinema (OSTI)

    Jackson, Roderick

    2014-07-15

    After growing up on construction sites, Roderick Jackson is now helping to make buildings nationwide far more energy efficient.

  12. NREL: Sustainable NREL - Sustainable Buildings

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Annual Sustainability Report FY2014. Printable Version Sustainable NREL Home About Sustainable NREL Environment Buildings Research Support Facility Science & Technology...

  13. Beardmore Building

    High Performance Buildings Database

    Priest River, ID Originally built in 1922 by Charles Beardmore, the building housed offices, mercantile shops, a ballroom and a theater. After decades of neglect under outside ownership, Brian Runberg, an architect and great-grandson of Charles Beardmore, purchased the building in 2006 and began an extensive whole building historic restoration.

  14. Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Research Isotopes produced at Los Alamos National Laboratory are saving lives, advancing cutting-edge research and keeping the U.S. safe. Research thorium test foil A thorium test foil target for proof-of-concept actinium-225 production In addition to our routine isotope products, the LANL Isotope Program is focused on developing the next suite of isotopes and services to meet the Nation's emerging needs. The LANL Isotope Program's R&D strategy is focused on four main areas (see

  15. Building Energy Optimization Analysis Method (BEopt) - Building America Top

    Energy Savers [EERE]

    Innovation | Department of Energy Energy Optimization Analysis Method (BEopt) - Building America Top Innovation Building Energy Optimization Analysis Method (BEopt) - Building America Top Innovation House graphic from BEopt software. To achieve Building America's ambitious energy-efficiency goals, it becomes increasingly important that researchers can identify the most cost-effective, high-performance improvements. This Top Innovation profile describes BEopt, which has proven to be an

  16. PROGRESS IN ENERGY EFFICIENT BUILDINGS

    SciTech Connect (OSTI)

    Wall, L.W.; Rosenfeld, A.H.

    1982-12-01

    Recent accomplishments in buildings energy research by the diverse groups in the Energy Efficient Buildings Program at Lawrence Berkeley Laboratory (LBL) are summarized. We review technological progress in the areas of ventilation and indoor air quality, buildings energy performance, computer modeling, windows, and artificial lighting. The need for actual consumption data to track accurately the improving energy efficiency of buildings is being addressed by the Buildings Energy Data (BED) Group at LBL. We summarize results to date from our Building Energy Use Compilation and Analysis (BECA) studies, which include time trends in the energy consumption of new commercial and new residential buildings, the measured savings being attained by both commercial and residential retrofits, and the cost-effectiveness of buildings energy conservation measures. We also examine recent comparisons of predicted vs. actual energy usage/savings, and present the case for building energy use labels.

  17. Testing the effectiveness of mobile home weatherization measures in a controlled environment: The SERI CMFERT (Collaborative Manufactured Buildings Facility for Energy Research and Training) Project

    SciTech Connect (OSTI)

    Judkoff, R.D.; Hancock, C.E.; Franconi, E.

    1990-03-01

    For several years the Solar Energy Research Institute has been testing the effectiveness of mobile home weatherization measures, with the support of the US DOE Office of State and Local Assistance Programs Weatherization Assistance Program, the DOE Office of Buildings and Community Systems, the seven states within the federal Weatherization Region 7, the Colorado Division of Housing, and the DOE Denver Support Office. During the winter of 1988--89, several weatherization measures were thermally tested on three mobile homes under controlled conditions inside a large environmental enclosure. The effects of each weatherization measure on conduction losses, infiltration losses, and combined furnace and duct-delivered heat efficiency were monitored. The retrofit options included air sealing, duct repair, furnace tune-up, interior storm panels, floor insulation, and roof insulation. The study demonstrated that cost-effective heating energy savings of about 20% to 50% are possible if weatherization techniques adapted to the special construction details in mobile homes are applied. 24 refs., 18 figs., 9 tabs.

  18. Space charge compensation in the Linac4 low energy beam transport line with negative hydrogen ions

    SciTech Connect (OSTI)

    Valerio-Lizarraga, Cristhian A.; Lallement, Jean-Baptiste; Lettry, Jacques; Scrivens, Richard; Leon-Monzon, Ildefonso; Midttun, ystein; University of Oslo, Oslo

    2014-02-15

    The space charge effect of low energy, unbunched ion beams can be compensated by the trapping of ions or electrons into the beam potential. This has been studied for the 45 keV negative hydrogen ion beam in the CERN Linac4 Low Energy Beam Transport using the package IBSimu [T. Kalvas et al., Rev. Sci. Instrum. 81, 02B703 (2010)], which allows the space charge calculation of the particle trajectories. The results of the beam simulations will be compared to emittance measurements of an H{sup ?} beam at the CERN Linac4 3 MeV test stand, where the injection of hydrogen gas directly into the beam transport region has been used to modify the space charge compensation degree.

  19. Integrated circuit failure analysis by low-energy charge-induced voltage alteration

    DOE Patents [OSTI]

    Cole, E.I. Jr.

    1996-06-04

    A scanning electron microscope apparatus and method are described for detecting and imaging open-circuit defects in an integrated circuit (IC). The invention uses a low-energy high-current focused electron beam that is scanned over a device surface of the IC to generate a charge-induced voltage alteration (CIVA) signal at the location of any open-circuit defects. The low-energy CIVA signal may be used to generate an image of the IC showing the location of any open-circuit defects. A low electron beam energy is used to prevent electrical breakdown in any passivation layers in the IC and to minimize radiation damage to the IC. The invention has uses for IC failure analysis, for production-line inspection of ICs, and for qualification of ICs. 5 figs.

  20. Integrated circuit failure analysis by low-energy charge-induced voltage alteration

    DOE Patents [OSTI]

    Cole, Jr., Edward I. (2116 White Cloud St., NE., Albuquerque, NM 87112)

    1996-01-01

    A scanning electron microscope apparatus and method are described for detecting and imaging open-circuit defects in an integrated circuit (IC). The invention uses a low-energy high-current focused electron beam that is scanned over a device surface of the IC to generate a charge-induced voltage alteration (CIVA) signal at the location of any open-circuit defects. The low-energy CIVA signal may be used to generate an image of the IC showing the location of any open-circuit defects. A low electron beam energy is used to prevent electrical breakdown in any passivation layers in the IC and to minimize radiation damage to the IC. The invention has uses for IC failure analysis, for production-line inspection of ICs, and for qualification of ICs.

  1. Electronic structure of nitinol surfaces oxidized by low-energy ion bombardment

    SciTech Connect (OSTI)

    Petravic, M. Varasanec, M.; Peter, R.; Kavre, I.; Metikos-Hukovic, M.; Yang, Y.-W.

    2014-06-28

    We have studied the electronic structure of nitinol exposed to low-energy oxygen-ion bombardment, using x-ray photoemission spectroscopy (XPS) and near-edge x-ray absorption fine structure (NEXAFS) spectroscopy. XPS spectra reveal a gradual transformation of nitinol surfaces into TiO{sub 2} with increased dose of implanted oxygen. No oxidation of Ni atoms has been detected. NEXAFS spectra around O K-edge and Ti L{sub 2,3}-edge, reflecting the element-specific partial density of empty electronic states, exhibit features, which can be attributed to the creation of molecular orbitals, crystal field splitting, and the absence of long-range order, characteristic of the amorphous TiO{sub 2}. Based on these results, we discuss the oxidation kinetics of nitinol under low-energy oxygen-ion bombardment.

  2. Zirconium Catalyst Follows a Low Energy Pathway for Carbon-Nitrogen Bond

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Formation | The Ames Laboratory Zirconium Catalyst Follows a Low Energy Pathway for Carbon-Nitrogen Bond Formation Chemists have synthesized a highly selective and highly efficient zirconium catalyst that makes new carbon-nitrogen bonds by adding a nitrogen-hydrogen bond to a carbon-carbon double bond. Nitrogen-containing chemicals are important as agrichemicals, pharmaceuticals, and specialty chemicals. These zirconium catalysts are expected to show greater tolerance to other functionality

  3. Zirconium Catalyst Follows a Low Energy Pathway for Carbon-Nitrogen Bond

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Formation | The Ames Laboratory Zirconium Catalyst Follows a Low Energy Pathway for Carbon-Nitrogen Bond Formation Chemists have synthesized a highly selective and highly efficient zirconium catalyst that makes new carbon-nitrogen bonds by adding a nitrogen-hydrogen bond to a carbon-carbon double bond. Nitrogen-containing chemicals are important as agrichemicals, pharmaceuticals, and specialty chemicals. These zirconium catalysts are expected to show greater tolerance to other functionality

  4. The Effects of Neutron Transfer on Nuclear Fusion at Low Energies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Effects of Neutron Transfer on Nuclear Fusion at Low Energies Nuclear fusion produces heavier nuclei in stars and in laboratories. At energies so low that a classical particle could not penetrate the Coulomb repulsion of the nucleus, the Coulomb barrier, fusion takes place by quantum tunneling. At these energies, fusion rates can be sensitive to the interplay between nuclear structure and nuclear reactions. This talk presents experimental studies of the influence of neutron transfer on

  5. Solving The Long-Standing Problem Of Low-Energy Nuclear Reactions At The

    Office of Scientific and Technical Information (OSTI)

    Highest Microscopic Level:Annual Continuation And Progress Report (Technical Report) | SciTech Connect Energy Nuclear Reactions At The Highest Microscopic Level:Annual Continuation And Progress Report Citation Details In-Document Search Title: Solving The Long-Standing Problem Of Low-Energy Nuclear Reactions At The Highest Microscopic Level:Annual Continuation And Progress Report Authors: Quaglioni, S Publication Date: 2013-02-21 OSTI Identifier: 1069008 Report Number(s): LLNL-TR-622512 DOE

  6. Transient and chaotic low-energy transfers in a system with bistable nonlinearity

    SciTech Connect (OSTI)

    Romeo, F.; Manevitch, L. I.; Bergman, L. A.; Vakakis, A.

    2015-05-15

    The low-energy dynamics of a two-dof system composed of a grounded linear oscillator coupled to a lightweight mass by means of a spring with both cubic nonlinear and negative linear components is investigated. The mechanisms leading to intense energy exchanges between the linear oscillator, excited by a low-energy impulse, and the nonlinear attachment are addressed. For lightly damped systems, it is shown that two main mechanisms arise: Aperiodic alternating in-well and cross-well oscillations of the nonlinear attachment, and secondary nonlinear beats occurring once the dynamics evolves solely in-well. The description of the former dissipative phenomenon is provided in a two-dimensional projection of the phase space, where transitions between in-well and cross-well oscillations are associated with sequences of crossings across a pseudo-separatrix. Whereas the second mechanism is described in terms of secondary limiting phase trajectories of the nonlinear attachment under certain resonance conditions. The analytical treatment of the two aformentioned low-energy transfer mechanisms relies on the reduction of the nonlinear dynamics and consequent analysis of the reduced dynamics by asymptotic techniques. Direct numerical simulations fully validate our analytical predictions.

  7. A simple and clean source of low-energy atomic carbon

    SciTech Connect (OSTI)

    Krasnokutski, S. A.; Huisken, F.

    2014-09-15

    A carbon source emitting low-energy carbon atoms from a thin-walled, sealed tantalum tube via thermal evaporation has been constructed. The tube is made from a 0.05?mm thick tantalum foil and filled with {sup 12}C or {sup 13}C carbon powder. After being sealed, it is heated by direct electric current. The solvated carbon atoms diffuse to the outer surface of the tube and, when the temperature rises over 2200?K, the evaporation of atomic carbon from the surface of the tantalum tube is observed. As the evaporated species have low energy they are well-suited for the incorporation into liquid helium droplets by the pick-up technique. Mass analysis of the incorporated species reveals the dominant presence of atomic carbon and very low abundances of C{sub 2} and C{sub 3} molecules (<1%). This is in striking contrast to the thermal evaporation of pure carbon, where C{sub 3} molecules are found to be the dominant species in the gas phase. Due to the thermal evaporation and the absence of high-energy application required for the dissociation of C{sub 2} and C{sub 3} molecules, the present source provides carbon atoms with rather low energy.

  8. NREL: Energy Analysis - Building Technologies Analysis

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building Technologies Analysis The Building Technologies analysis supports research and development on technologies and practices for energy efficiency, working closely with the building industry and manufacturers; promotes energy and money-saving opportunities to builders and consumers; and works with state and local regulatory groups to improve building codes and appliance standards. Building Energy Software Tools Directory Described here are 283 energy-related software tools for buildings,

  9. Retrofit Ventilation Strategies in Multifamily Buildings Webinar |

    Energy Savers [EERE]

    Department of Energy Retrofit Ventilation Strategies in Multifamily Buildings Webinar Retrofit Ventilation Strategies in Multifamily Buildings Webinar Slides from the Building America webinar on November 30, 2011. PDF icon webinar_hybrid_insulation_20111130.pdf More Documents & Publications Building America Expert Meeting: Foundations Research Results Building America Expert Meeting: Interior Insulation Retrofit of Mass Masonry Wall Assemblies Building America Technology Solutions for

  10. Commercial Building Activities | Department of Energy

    Office of Environmental Management (EM)

    Commercial Building Activities Commercial Building Activities The Building Technologies Office commercial buildings effort researches and deploys advanced technologies and systems to reduce energy consumption in commercial buildings. Industry partners and national laboratories help identify market needs and solutions to accelerate the development of highly energy-efficient buildings. This page outlines some of BTO's key projects. 179d Tax Calculator The 179d Calculator can help determine whether

  11. Proceedings of RIKEN BNL Resarch Center Workshop: Fluctuations, Correlations and RHIC Low Energy Runs

    SciTech Connect (OSTI)

    Karsch, F.; Kojo, T.; Mukherjee, S.; Stephanov, M.; Xu, N.

    2011-10-27

    Most of our visible universe is made up of hadronic matter. Quantum Chromodynamics (QCD) is the theory of strong interaction that describes the hadronic matter. However, QCD predicts that at high enough temperatures and/or densities ordinary hadronic matter ceases to exist and a new form of matter is created, the so-called Quark Gluon Plasma (QGP). Non-perturbative lattice QCD simulations shows that for high temperature and small densities the transition from the hadronic to the QCD matter is not an actual phase transition, rather it takes place via a rapid crossover. On the other hand, it is generally believed that at zero temperature and high densities such a transition is an actual first order phase transition. Thus, in the temperature-density phase diagram of QCD, the first order phase transition line emanating from the zero temperature high density region ends at some higher temperature where the transition becomes a crossover. The point at which the first order transition line turns into a crossover is a second order phase transition point belonging to three dimensional Ising universality class. This point is known as the QCD Critical End Point (CEP). For the last couple of years the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory has been performing experiments at lower energies in search of the elusive QCD CEP. In general critical behaviors are manifested through appearance of long range correlations and increasing fluctuations associated with the presence of mass-less modes in the vicinity of a second order phase transition. Experimental signatures of the CEP are likely to be found in observables related to fluctuations and correlations. Thus, one of the major focuses of the RHIC low energy scan program is to measure various experimental observables connected to fluctuations and correlations. On the other hand, with the start of the RHIC low energy scan program, a flurry of activities are taking place to provide solid theoretical background for the search of the CEP using observables related to fluctuations and correlations. While new data are pouring in from the RHIC low energy scan program, many recent advances have also been made in the phenomenological and lattice gauge theory sides in order to have a better theoretical understanding of the wealth of new data. This workshop tried to create a synergy between the experimental, phenomenological and lattice QCD aspects of the fluctuation and correlation related studies of the RHIC low energy scan program. The workshop brought together all the leading experts from related fields under the same forum to share new ideas among themselves in order to streamline the continuing search of CEP in the RHIC low energy scan program.

  12. Energy Sciences Building | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Video Argonne's Energy Sciences Building Resources Energy Sciences Building (ESB) brochure Energy Sciences Building The Energy Sciences Building is a world-class scientific facility and a shining example of sustainable design. Argonne's Energy Sciences Building (ESB) contains a nexus of interdisciplinary research in basic materials design, fundamental chemistry and energy systems research designed to address the nation's most pressing challenge of the 21st century - clean, affordable, and

  13. Vacant Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Vacant Characteristics by Activity... Vacant Vacant buildings are those in which more floorspace was vacant than was used for any single commercial activity at the time of the...

  14. Service Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Service Characteristics by Activity... Service Service buildings are those in which some type of service is provided, other than food service or retail sales of goods. Basic...

  15. Other Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Other Characteristics by Activity... Other Other buildings are those that do not fit into any of the specifically named categories. Basic Characteristics See also: Equipment |...

  16. Buildings Database

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Efficiency & Renewable Energy EERE Home | Programs & Offices | Consumer Information Buildings Database Welcome Guest Log In | Register | Contact Us Home About All Projects...

  17. HVAC & Building Management Control System Energy Efficiency Replacements

    SciTech Connect (OSTI)

    Hernandez, Adriana

    2012-09-21

    The project objective was the replacement of an aging, un-repairable HVAC system which has grown inefficient and a huge energy consumer with low energy and efficient HVAC units, and installation of energy efficient building control technologies at City's YMCA Community Center.

  18. What We are Building | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    What We are Building The Ames Laboratory Research involves Integrating Materials Technology, Engineering, Education, and Research (i-MaTTER). We bring value for the nation,...

  19. Reducing Data Center Loads for a Large-scale, Low Energy Office...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The project's request for proposals (RFP) set a whole-building demand-side energy use ... use intensity FEMP Federal Energy Management Program FLOPS Floating point ...

  20. Achieving 50% Energy Savings in Office Buildings, Advanced Energy Design Guides: Office Buildings (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-09-01

    This fact sheet summarizes recommendations for designing new office buildings that result in 50% less energy use than conventional designs meeting minimum code requirements. The recommendations are drawn from the Advanced Energy Design Guide for Small to Medium Office Buildings, an ASHRAE publication that provides comprehensive recommendations for designing low-energy-use office buildings with gross floor areas up to 100,000 ft2 (see sidebar). Designed as a stand-alone document, this fact sheet provides key principles and a set of prescriptive design recommendations appropriate for smaller office buildings with insufficient budgets to fully implement best practices for integrated design and optimized performance. The recommendations have undergone a thorough analysis and review process through ASHRAE, and have been deemed the best combination of measures to achieve 50% savings in the greatest number of office buildings.

  1. Observation of high iron charge states at low energies in solar energetic particle events

    SciTech Connect (OSTI)

    Guo, Z.; Mbius, E.; Bochsler, P.; Connell, J. J.; Popecki, M. A.; Klecker, B.; Kartavykh, Y. Y.; Mason, G. M.

    2014-04-10

    The ionic charge states of solar energetic particles (SEPs) provide direct information about the source plasma, the acceleration environment, and their transport. Recent studies report that both gradual and impulsive SEP events show mean iron charge states (Q {sub Fe}) ? 10-14 at low energies E ? 0.1 MeV nuc{sup 1}, consistent with their origin from typical corona material at temperatures 1-2 MK. Observed increases of (Q {sub Fe}) up to 20 at energies 0.1-0.5 MeV nuc{sup 1} in impulsive SEPs are attributed to stripping during acceleration. However, Q {sub Fe} > 16 is occasionally found in the solar wind, particularly coming from active regions, in contrast to the exclusively reported (Q {sub Fe}) ? 14 for low energy SEPs. Here we report results from a survey of all 89 SEP events observed with Advanced Composition Explorer Solar Energetic Particle Ionic Charge Analyzer (SEPICA) in 1998-2000 for iron charge states augmented at low energy with Solar and Heliospheric Observatory CELIAS suprathermal time-of-flight (STOF). Nine SEP events with (Q {sub Fe}) ? 14 throughout the entire SEPICA and STOF energy range have been identified. Four of the nine events are impulsive events identified through velocity dispersion that are consistent with source temperatures ?2 MK up to ?4 MK. The other five events show evidence of interplanetary acceleration. Four of them involve re-acceleration of impulsive material, whose original energy dependent charge states appear re-distributed to varying extent bringing higher charge states to lower energy. One event, which shows flat but elevated (Q {sub Fe}) ? 14.2 over the entire energy range, can be associated with interplanetary acceleration of high temperature material. This event may exemplify a rare situation when a second shock plows through high temperature coronal mass ejection material.

  2. Basic physics program for a low energy antiproton source in North America

    SciTech Connect (OSTI)

    Bonner, B.E.; Nieto, M.M.

    1987-01-01

    We summarize much of the important science that could be learned at a North American low energy antiproton source. It is striking that there is such a diverse and multidisciplinary program that would be amenable to exploration. Spanning the range from high energy particle physics to nuclear physics, atomic physics, and condensed matter physics, the program promises to offer many new insights into these disparate branches of science. It is abundantly clear that the scientific case for rapidly proceeding towards such a capability in North America is both alluring and strong. 38 refs., 2 tabs.

  3. A phenomenological study of photon production in low energy neutrino nucleon scattering

    SciTech Connect (OSTI)

    Jenkins, James P; Goldman, Terry J

    2009-01-01

    Low energy photon production is an important background to many current and future precision neutrino experiments. We present a phenomenological study of t-channel radiative corrections to neutral current neutrino nucleus scattering. After introducing the relevant processes and phenomenological coupling constants, we will explore the derived energy and angular distributions as well as total cross-section predictions along with their estimated uncertainties. This is supplemented throughout with comments on possible experimental signatures and implications. We conclude with a general discussion of the analysis in the context of complimentary methodologies. This is based on a talk presented at the DPF 2009 meeting in Detroit MI.

  4. Low-Energy Selective Capture of Carbon Dioxide by a Pre-designed Elastic

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Single-Molecule Trap | Center for Gas SeparationsRelevant to Clean Energy Technologies | Blandine Jerome Low-Energy Selective Capture of Carbon Dioxide by a Pre-designed Elastic Single-Molecule Trap Previous Next List Mario Wriedt, Julian P. Sculley, Andrey A. Yakovenko, Yuguang Ma, Gregory J. Halder, Prof. Dr. Perla B. Balbuena, Hong-Cai Zhou, Angew. Chem. Int. Ed., 51, 9804-9808 (2012) DOI: 10.1002/anie.201202992 Thumbnail image of graphical abstract Abstract: Easy activation of the

  5. Low-energy run of Fermilab Electron Cooler's beam generation system

    SciTech Connect (OSTI)

    Prost, Lionel; Shemyakin, Alexander; Fedotov, Alexei; Kewisch, Jorg; /Brookhaven

    2010-08-01

    As a part of a feasibility study of using the Fermilab Electron Cooler for a low-energy Relativistic Heavy Ion Collider (RHIC) run at Brookhaven National Laboratory (BNL), the cooler operation at 1.6 MeV electron beam energy was tested in a short beam line configuration. The main result of the study is that the cooler beam generation system is suitable for BNL needs. In a striking difference with running 4.3 MeV beam, no unprovoked beam recirculation interruptions were observed.

  6. National Laboratories Supporting Building America | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Residential Buildings » Building America » National Laboratories Supporting Building America National Laboratories Supporting Building America The U.S. Department of Energy's (DOE) national laboratories work very closely with the Building America research teams to achieve program goals. The laboratories offer extensive scientific and technical R&D expertise for building technologies and improved building practices. Following is a brief description of the laboratories involved with Building

  7. H{sup -} beam transport experiments in a solenoid low energy beam transport

    SciTech Connect (OSTI)

    Gabor, C.; Back, J. J.; Faircloth, D. C.; Lawrie, S. R.; Letchford, A. P.; Izaola, Z.

    2012-02-15

    The Front End Test Stand (FETS) is located at Rutherford Appleton Laboratory and aims for a high current, fast chopped 3 MeV H{sup -} ion beam suitable for future high power proton accelerators like ISIS upgrade. The main components of the front end are the Penning ion source, a low energy beam transport line, an radio-frequency quadrupole (RFQ) and a medium energy beam transport (MEBT) providing also a chopper section and rebuncher. FETS is in the stage of commissioning its low energy beam transport (LEBT) line consisting of three solenoids. The LEBT has to transport an H{sup -} high current beam (up to 60 mA) at 65 keV. This is the injection energy of the beam into the RFQ. The main diagnostics are slit-slit emittance scanners for each transversal plane. For optimizing the matching to the RFQ, experiments have been performed with a variety of solenoid settings to better understand the actual beam transport. Occasionally, source parameters such as extractor slit width and beam energy were varied as well. The paper also discusses simulations based on these measurements.

  8. Studies on low energy beam transport for high intensity high charged ions at IMP

    SciTech Connect (OSTI)

    Yang, Y. Lu, W.; Fang, X.; University of Chinese Academy of Sciences, Beijing 100039 ; Sun, L. T.; Hu, Q.; Cao, Y.; Feng, Y. C.; Zhang, X. Z.; Zhao, H. W.; Xie, D. Z.

    2014-02-15

    Superconducting Electron Cyclotron Resonance ion source with Advanced design in Lanzhou (SECRAL) is an advanced fully superconducting ECR ion source at IMP designed to be operational at the microwave frequency of 1824 GHz. The existing SECRAL beam transmission line is composed of a solenoid lens and a 110 analyzing magnet. Simulations of particle tracking with 3D space charge effect and realistic 3D magnetic fields through the line were performed using particle-in-cell code. The results of the beam dynamics show that such a low energy beam is very sensitive to the space charge effect and significantly suffers from the second-order aberration of the analyzing magnet resulting in large emittance. However, the second-order aberration could be reduced by adding compensating sextupole components in the beam line. On this basis, a new 110 analyzing magnet with relatively larger acceptance and smaller aberration is designed and will be used in the design of low energy beam transport line for a new superconducting ECR ion source SECRAL-II. The features of the analyzer and the corresponding beam trajectory calculation will be detailed and discussed in this paper.

  9. Building Science

    Broader source: Energy.gov [DOE]

    This presentation was given at the Summer 2012 DOE Building America meeting on July 25, 2012, and addressed the question How do we first do no harm with high-r enclosures?Ž

  10. Lodging Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    were then asked to place the building into the following more specific categories: a hotel a motel, inn, or resort a retirement home a shelter, orphanage, or children's home a...

  11. Building America Residential Buildings Energy Efficiency Meeting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Buildings Energy Efficiency Meeting: July 2010 Building America Residential Buildings ... More Documents & Publications Summary of Gaps and Barriers for Implementing Residential ...

  12. Building America Expert Meeting: Transforming Existing Buildings...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transforming Existing Buildings through New Media--An Idea Exchange Building America Expert Meeting: Transforming Existing Buildings through New Media--An Idea Exchange This report...

  13. Building America Top Innovations 2014 Profile: California Energy...

    Office of Scientific and Technical Information (OSTI)

    Selection This 2014 Top Innovation profile describes Building America research on ... Country of Publication: United States Language: English Subject: Building America; top ...

  14. Building America Webinar: Field Test Best Practices Tool

    Broader source: Energy.gov [DOE]

    This presentation was delivered at the U.S. Department of Energy Building America webinar, Building America Research Tools, on March 18, 2015.

  15. Building America Whole-House Solutions for New Homes: Lancaster...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Whole-House Solutions for New Homes: Lancaster County Career and ... performance homes with help from Building America team, Home Innovation Research Labs. ...

  16. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    In this project, researchers from Building Science Corporation investigated issues to better understand the mechanics behind the addition of insulation to the exterior of buildings ...

  17. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Performance of a Double-Stud Cellulose Wall, Devens, Massachusetts In this project, the Building America research team Consortium for Advanced Residential Buildings monitored a...

  18. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Florida (Fact Sheet) In a study of three single-story houses in Florida, the Building America research team Consortium for Advanced Residential Buildings (CARB)...

  19. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Vapor Permeable Insulating Sheathing (Fact Sheet) In this project, Building America team Building Science Corporation researched some of the ramifications of using exterior,...

  20. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Residential Applications, Ithaca, New York (Fact Sheet) In this project, researchers from Building America team Consortium for Advanced Residential Buildings worked with industry...

  1. Building America Whole-House Solutions for New Homes: Insight...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Whole-House Solutions for New Homes: Insight Homes, Seaford, Delaware Case study of Insight Homes, who worked with the Building America research partner IBACOS to ...

  2. Building America Whole-House Solutions for New Homes: Grupe,...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Whole-House Solutions for New Homes: Grupe, Rocklin, California Case Study of Grupe who worked with Building America research partner Davis Energy Group to design ...

  3. Building America Whole-House Solutions for New Homes: Nelson...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Whole-House Solutions for New Homes: Nelson Construction, Farmington, Connecticut Case study of Nelson Construction, who worked with the Building America research ...

  4. Building America Whole-House Solutions for New Homes: Devoted...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Whole-House Solutions for New Homes: Devoted Builders, LLC, Pasco, Washington Case study of Devoted Builders who worked with Building America research partner WSU ...

  5. Building America Whole-House Solutions for New Homes: Urbane...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Whole-House Solutions for New Homes: Urbane Homes, Louisville, Kentucky Case study of Urbane Homes who worked with Building America research partner NAHBRC to ...

  6. Building America Webinar: Opportunities to Apply Phase Change...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Webinar: Opportunities to Apply Phase Change Materials to Building Enclosures This webinar, presented by research team Fraunhofer Center for Sustainable Energy ...

  7. Building America Update - October 2012 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    you can link to the October 2012 edition of the Building America Update, which features articles on: Industry publications highlighting Building America research on HVAC systems...

  8. Webcam for New NERSC Building

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Webcam for New NERSC Building Webcam for New NERSC Building March 4, 2013 by Francesca Verdier NERSC plans to move into a new building called the Computational Research and Theory Facility by early 2015. Construction has begun at the main Berkeley Lab site. A webcam shows construction activity. Subscribe via RSS Subscribe Browse by Date January 2016 December 2015 November 2015 October 2015 September 2015 August 2015 July 2015 April 2015 March 2015 January 2015 December 2014 November 2014

  9. Building America Update - April 5, 2013

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    April 5, 2013 This announcement brings you the latest information about news, activities, and publications from the U.S. Department of Energy's Building America program. Please forward this message to colleagues who may be interested in subscribing to future Building America Update newsletters. Learn about Top Innovations from Building America Since 1995, Building America research has resulted in more than 30 major innovations that are helping to transform our nation's home building and retrofit

  10. Building America Solution Center | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Solution Center Building America Solution Center World-Class Research At Your Fingertips The Building America Solution Center provides residential building professionals with access to expert information on hundreds of high-performance design and construction topics, including air sealing and insulation, HVAC components, windows, indoor air quality, and much more. Explore the Building America Solution Center. The user-friendly interface delivers a variety of resources for each

  11. Low-energy ion beamline scattering apparatus for surface science investigations

    SciTech Connect (OSTI)

    Gordon, M.J.; Giapis, K.P.

    2005-08-15

    We report on the design, construction, and performance of a high current (monolayers/s), mass-filtered ion beamline system for surface scattering studies using inert and reactive species at collision energies below 1500 eV. The system combines a high-density inductively coupled plasma ion source, high-voltage floating beam transport line with magnet mass-filter and neutral stripping, decelerator, and broad based detection capabilities (ions and neutrals in both mass and energy) for products leaving the target surface. The entire system was designed from the ground up to be a robust platform to study ion-surface interactions from a more global perspective, i.e., high fluxes (>100 {mu}A/cm{sup 2}) of a single ion species at low, tunable energy (50-1400{+-}5 eV full width half maximum) can be delivered to a grounded target under ultrahigh vacuum conditions. The high current at low energy problem is solved using an accel-decel transport scheme where ions are created at the desired collision energy in the plasma source, extracted and accelerated to high transport energy (20 keV to fight space charge repulsion), and then decelerated back down to their original creation potential right before impacting the grounded target. Scattered species and those originating from the surface are directly analyzed in energy and mass using a triply pumped, hybrid detector composed of an electron impact ionizer, hemispherical electrostatic sector, and rf/dc quadrupole in series. With such a system, the collision kinematics, charge exchange, and chemistry occurring on the target surface can be separated by fully analyzing the scattered product flux. Key design aspects of the plasma source, beamline, and detection system are emphasized here to highlight how to work around physical limitations associated with high beam flux at low energy, pumping requirements, beam focusing, and scattered product analysis. Operational details of the beamline are discussed from the perspective of available beam current, mass resolution, projectile energy spread, and energy tunability. As well, performance of the overall system is demonstrated through three proof-of-concept examples: (1) elastic binary collisions at low energy (2) core-level charge exchange reactions involving {sup 20}Ne{sup +} with Mg/Al/Si/P targets, and (3) reactive scattering of CF{sub 2}{sup +}/CF{sub 3}{sup +} off Si. These studies clearly demonstrate why low, tunable incident energy, as well as mass and energy filtering of products leaving the target surface is advantageous and often essential for studies of inelastic energy losses, hard-collision charge exchange, and chemical reactions that occur during ion-surface scattering.

  12. Archive Reference Buildings by Building Type: Warehouse

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  13. Building on Success

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on Success Sandia facilities meet diverse needs for national security, research and partnerships Sandia National Laboratories' state-of-the-art facilities represent a unique set of scientific and engineering resources. They serve Sandia's national security mission and research needs. Certain facilities also are available to industry, academia, other laboratories, state and local governments and the broader scientific community. And, more than 10 percent of Sandia's building square footage is

  14. Reducing Plug and Process Loads for a Large Scale, Low Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Proposals (RFP) set a whole-building demand-side energy use requirement of a nominal 25 ... IT and management put in place policies that have eliminated shared and personal ...

  15. Webinar: Max Tech and Beyond Design Competition for Ultra-Low-Energy-Use Appliances & Equipment

    Broader source: Energy.gov [DOE]

    The competition invited twelve University faculty-led student engineering teams to participate in a year long effort to design, build and test their original energy savings technologies and prototypes.

  16. EA-1147: Low Energy Demonstration Accelerator Tech Area 53, Los Alamos, New Mexico

    Broader source: Energy.gov [DOE]

    This EA evaluates the environmental impacts that would be expected to occur if the Department of Energy were to design, build, and test critical prototypical components of the accelerator system...

  17. Correlation measurements in nuclear {beta}-decay using traps and polarized low energy beams

    SciTech Connect (OSTI)

    Naviliat-Cuncic, Oscar

    2013-05-06

    Precision measurements in nuclear {beta}-decay provide sensitive means to test discrete symmetries in the weak interaction and to determine some of the fundamental constants in semi-leptonic decays, like the coupling of the lightest quarks to charged weak bosons. The main motivation of such measurements is to find deviations from Standard Model predictions as possible indications of new physics. In this contribution I will focus on two topics related to precision measurements in nuclear {beta}-decay: i) the determination of the V{sub ud} element of the Cabibbo-Kobayashi-Maskawa quark mixing matrix from nuclear mirror transitions and ii) the search for exotic scalar or tensor contributions from {beta}{nu} angular correlations. The purpose is to underline the role being played by experimental techniques based on the confinement of radioactive species with atom and ion traps as well as the plans to use low energy polarized beams.

  18. Production of energetic neutral particles and low energy electrons from four anode rods ion source

    SciTech Connect (OSTI)

    Mostafa, O. A.; El-Khabeary, H.; Abdel Reheem, A. M.

    2013-11-15

    The factors affecting the energetic neutral current, the low energy electron current, and the positive ion current emerging from a four-anode-rods ion source have been studied using argon gas. The neutral and electron current were measured using a simple, new technique. It was found that the energetic neutral current and the electron current depend on the positive ion current and the gas pressure. The ratio of the neutral and electron current to the positive ion current increases by increasing the gas pressure. Also it was found that at a pressure equal to 9 10{sup ?4} mmHg, the ratio of the neutral to the positive ion current reaches 2.34 while the ratio of the electron current to the positive ion current reaches 1.7.

  19. Mimicking bipolar sextupole power supplies for low-energy operations at RHIC

    SciTech Connect (OSTI)

    Montag, C.; Bruno, D.; Jain, A.; Robert-Demolaize, G.; Satogata, T.; Tepikian, S.

    2011-03-28

    RHIC operated at energies below the nominal ion injection energy of E=9.8 GeV/u in 2010. Earlier test runs and magnet measurements indicated that all defocusing sextupole unipolar power supplies should be reversed to provide the proper sign of chromaticity. However, vertical chromaticity at E=3.85 GeV/u with this power supply configuration was still not optimal. This uncertainty inspired a new machine configuration where only half of the defocusing sextupole power supplies were reversed, taking advantage of the flexibility of the RHIC nonlinear chromaticity correction system to mimic bipolar sextupoles. This configuration resulted in a 30 percent luminosity gain and eliminated the need for further polarity changes for later 2010 low energy physics operations. Here we describe the background to this problem, operational experience, and RHIC online model changes to implement this solution.

  20. Design of an accelerating cavity for the Superconducting Super Collider Low-Energy Booster

    SciTech Connect (OSTI)

    Friedrichs, C.C.; Walling, L. ); Campbell, B.M. )

    1991-01-01

    This paper presents the history and current status of the design of the accelerator cavity to be incorporated into the Low-Energy Booster (LEB) of the Superconducting Super Collider (SSC). The LEB is a proton synchrotron, 540 meters in circumference, and having 108 buckets around the ring. Acceleration programs, each 50 msec long, take place at a rate of 10 per second. The beta change of the particles from injection to extraction is from 0.8 to 0.997. Since the rf excitation frequency must track beta, the rf frequency must shift from 47.5 to 60 MHz over the 50-msec acceleration program. The cavity will use ferrite in a perpendicular control bias mode to effect the require tuning. 4 refs., 1 fig.

  1. Modulator considerations for beam chopping in the low energy beam transport at the SSC Laboratory

    SciTech Connect (OSTI)

    Anderson, D.; Pappas, G.

    1991-06-01

    Beam chopping in the low energy transport line at the Superconducting Super Collider Laboratory is accomplished using an electrostatic deflection system. LINAC requirements dictate the design of two modulators operating at 10 Hz with rise and fall times (as measured from approximately 10--99%) of {approximately}100 ns. Design of the first pulser, normally at 10 kV and pulsed to ground potential, utilizes a transformer-coupled diode-clamped solid state circuit to achieve the 2--35 {mu}s pulse width range required. The second pulser, which pulses from ground to approximately 7 kV, relies on a series vacuum tube circuit. The current designs, as well as recent test results and other circuit topologies considered, will be presented. 6 refs.

  2. Low-energy parameters of neutron-neutron interaction in the effective-range approximation

    SciTech Connect (OSTI)

    Babenko, V. A.; Petrov, N. M. [National Academy of Sciences of Ukraine, Bogolyubov Institute for Theoretical Physics (Ukraine)

    2013-06-15

    The effect of the mass difference between the charged and neutral pions on the low-energy parameters of nucleon-nucleon interaction in the {sup 1}S{sub 0} state is studied in the effective-range approximation. On the basis of experimental values of the singlet parameters of neutron-proton scattering and the experimental value of the virtual-state energy for the neutron-neutron systemin the {sup 1}S{sub 0} state, the following values were obtained for the neutron-neutron scattering length and effective range: a{sub nn} = -16.59(117) fm and r{sub nn} = 2.83(11) fm. The calculated values agree well with present-day experimental results.

  3. Tungsten bridge for the low energy ignition of explosive and energetic materials

    DOE Patents [OSTI]

    Benson, David A. (Albuquerque, NM); Bickes, Jr., Robert W. (Albuquerque, NM); Blewer, Robert S. (Albuquerque, NM)

    1990-01-01

    A tungsten bridge device for the low energy ignition of explosive and energetic materials is disclosed. The device is fabricated on a silicon-on-sapphire substrate which has an insulating bridge element defined therein using standard integrated circuit fabrication techniques. Then, a thin layer of tungsten is selectively deposited on the silicon bridge layer using chemical vapor deposition techniques. Finally, conductive lands are deposited on each end of the tungsten bridge layer to form the device. It has been found that this device exhibits substantially shorter ignition times than standard metal bridges and foil igniting devices. In addition, substantially less energy is required to cause ignition of the tungsten bridge device of the present invention than is required for common metal bridges and foil devices used for the same purpose.

  4. Tungsten bridge for the low energy ignition of explosive and energetic materials

    DOE Patents [OSTI]

    Benson, D.A.; Bickes, R.W. Jr.; Blewer, R.S.

    1990-12-11

    A tungsten bridge device for the low energy ignition of explosive and energetic materials is disclosed. The device is fabricated on a silicon-on-sapphire substrate which has an insulating bridge element defined therein using standard integrated circuit fabrication techniques. Then, a thin layer of tungsten is selectively deposited on the silicon bridge layer using chemical vapor deposition techniques. Finally, conductive lands are deposited on each end of the tungsten bridge layer to form the device. It has been found that this device exhibits substantially shorter ignition times than standard metal bridges and foil igniting devices. In addition, substantially less energy is required to cause ignition of the tungsten bridge device of the present invention than is required for common metal bridges and foil devices used for the same purpose. 2 figs.

  5. A tunable low-energy photon source for high-resolution angle-resolved photoemission spectroscopy

    SciTech Connect (OSTI)

    Harter, John W.; Monkman, Eric J.; Shai, Daniel E.; Nie Yuefeng; Uchida, Masaki; Burganov, Bulat; Chatterjee, Shouvik; King, Philip D. C.; Shen, Kyle M.

    2012-11-15

    We describe a tunable low-energy photon source consisting of a laser-driven xenon plasma lamp coupled to a Czerny-Turner monochromator. The combined tunability, brightness, and narrow spectral bandwidth make this light source useful in laboratory-based high-resolution photoemission spectroscopy experiments. The source supplies photons with energies up to {approx}7 eV, delivering under typical conditions >10{sup 12} ph/s within a 10 meV spectral bandwidth, which is comparable to helium plasma lamps and many synchrotron beamlines. We first describe the lamp and monochromator system and then characterize its output, with attention to those parameters which are of interest for photoemission experiments. Finally, we present angle-resolved photoemission spectroscopy data using the light source and compare its performance to a conventional helium plasma lamp.

  6. Systematic low-energy effective field theory for electron-doped antiferromagnets

    SciTech Connect (OSTI)

    Bruegger, C.; Kaempfer, F.; Moser, M.; Wiese, U.-J.; Hofmann, C. P.; Pepe, M.

    2007-06-01

    In contrast to hole-doped systems which have hole pockets centered at ({+-}({pi}/2a),{+-}({pi}/2a)), in lightly electron-doped antiferromagnets the charged quasiparticles reside in momentum space pockets centered at (({pi}/a),0) or (0,({pi}/a)). This has important consequences for the corresponding low-energy effective field theory of magnons and electrons which is constructed in this paper. In particular, in contrast to the hole-doped case, the magnon-mediated forces between two electrons depend on the total momentum P-vector of the pair. For P-vector=0, the one-magnon exchange potential between two electrons at distance r is proportional to 1/r{sup 4}, while in the hole case, it has a 1/r{sup 2} dependence. The effective theory predicts that spiral phases are absent in electron-doped antiferromagnets.

  7. ACCELERATION OF LOW-ENERGY IONS AT PARALLEL SHOCKS WITH A FOCUSED TRANSPORT MODEL

    SciTech Connect (OSTI)

    Zuo, Pingbing; Zhang, Ming; Rassoul, Hamid K.

    2013-04-10

    We present a test particle simulation on the injection and acceleration of low-energy suprathermal particles by parallel shocks with a focused transport model. The focused transport equation contains all necessary physics of shock acceleration, but avoids the limitation of diffusive shock acceleration (DSA) that requires a small pitch angle anisotropy. This simulation verifies that the particles with speeds of a fraction of to a few times the shock speed can indeed be directly injected and accelerated into the DSA regime by parallel shocks. At higher energies starting from a few times the shock speed, the energy spectrum of accelerated particles is a power law with the same spectral index as the solution of standard DSA theory, although the particles are highly anisotropic in the upstream region. The intensity, however, is different from that predicted by DSA theory, indicating a different level of injection efficiency. It is found that the shock strength, the injection speed, and the intensity of an electric cross-shock potential (CSP) jump can affect the injection efficiency of the low-energy particles. A stronger shock has a higher injection efficiency. In addition, if the speed of injected particles is above a few times the shock speed, the produced power-law spectrum is consistent with the prediction of standard DSA theory in both its intensity and spectrum index with an injection efficiency of 1. CSP can increase the injection efficiency through direct particle reflection back upstream, but it has little effect on the energetic particle acceleration once the speed of injected particles is beyond a few times the shock speed. This test particle simulation proves that the focused transport theory is an extension of DSA theory with the capability of predicting the efficiency of particle injection.

  8. Modeling, design and thermal performance of a BIPV/T system thermally coupled with a ventilated concrete slab in a low energy solar house: Part 2, ventilated concrete slab

    SciTech Connect (OSTI)

    Chen, Yuxiang; Galal, Khaled; Athienitis, A.K.

    2010-11-15

    This paper is the second of two papers that describe the modeling and design of a building-integrated photovoltaic-thermal (BIPV/T) system thermally coupled with a ventilated concrete slab (VCS) adopted in a prefabricated, two-storey detached, low energy solar house and their performance assessment based on monitored data. The VCS concept is based on an integrated thermal-structural design with active storage of solar thermal energy while serving as a structural component - the basement floor slab ({proportional_to}33 m{sup 2}). This paper describes the numerical modeling, design, and thermal performance assessment of the VCS. The thermal performance of the VCS during the commissioning of the unoccupied house is presented. Analysis of the monitored data shows that the VCS can store 9-12 kWh of heat from the total thermal energy collected by the BIPV/T system, on a typical clear sunny day with an outdoor temperature of about 0 C. It can also accumulate thermal energy during a series of clear sunny days without overheating the slab surface or the living space. This research shows that coupling the VCS with the BIPV/T system is a viable method to enhance the utilization of collected solar thermal energy. A method is presented for creating a simplified three-dimensional, control volume finite difference, explicit thermal model of the VCS. The model is created and validated using monitored data. The modeling method is suitable for detailed parametric study of the thermal behavior of the VCS without excessive computational effort. (author)

  9. Building America Webinar: Retrofit Ventilation Strategies in Multifamily Buildings Webinar

    Broader source: Energy.gov [DOE]

    This webinar, presented by research team Building Science Corporation, discussed insulating foundations and controlling water leakage as a critical measure for reducing heating load in homes in cold climates.

  10. Commercial Building Partnership

    Broader source: Energy.gov [DOE]

    Commercial Buildings Integration Project for the 2013 Building Technologies Office's Program Peer Review

  11. Energy Efficient Buildings Hub

    SciTech Connect (OSTI)

    2013-04-01

    Energy Efficient Buildings HUB Lunch Presentation for the 2013 Building Technologies Office's Program Peer Review

  12. Energy Efficient Buildings Hub

    Broader source: Energy.gov [DOE]

    Energy Efficient Buildings HUB Lunch Presentation for the 2013 Building Technologies Office's Program Peer Review

  13. Building Technologies Office Overview

    SciTech Connect (OSTI)

    2013-04-01

    Building Technologies Office Overview Presentation for the 2013 Building Technologies Office's Program Peer Review

  14. Residential Buildings Integration Program

    Broader source: Energy.gov [DOE]

    Residential Buildings Integration Program Presentation for the 2013 Building Technologies Office's Program Peer Review

  15. Funding Opportunity Coming Soon: Building America Industry Partnerships

    Broader source: Energy.gov [DOE]

    The Building Technologies Office (BTO) has issued a notice of intent to release a funding opportunity focusing on selecting additional building science teams for the Building America Research Program. This funding opportunity announcement (FOA) builds on work begun in the 2015 Building America FOA.

  16. Reducing Energy Demand in Buildings Through State Energy Codes | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Reducing Energy Demand in Buildings Through State Energy Codes Reducing Energy Demand in Buildings Through State Energy Codes Building Codes Project for the 2013 Building Technologies Office's Program Peer Review PDF icon bldgcodes03_guttman_040213.pdf More Documents & Publications Technology Performance Exchange - 2013 BTO Peer Review Atmospheric Pressure Deposition for Electrochromic Windows Building America System Research

  17. Whole Building Performance-Based Procurement Training | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Whole Building Performance-Based Procurement Training Whole Building Performance-Based Procurement Training Commercial Buildings Integration Project for the 2013 Building Technologies Office's Program Peer Review PDF icon commlbldgs12_pless_040413.pdf More Documents & Publications Best Practices for Controlling Capital Costs in Net Zero Energy Design and Construction - 2014 BTO Peer Review Solar Decathlon Building America System Research

  18. Buildings","Heated Buildings",,"Cooled Buildings",,"Lit Buildingsc...

    U.S. Energy Information Administration (EIA) Indexed Site

    ... with Cooling ......",58474,56361,49482,58474,42420,57936,50055 "Buildings with Water Heating .",56115,54204,48070,52589,38844,55586,48125 "Buildings with Cooking ...

  19. Guidelines for Building Science Education

    SciTech Connect (OSTI)

    Metzger, Cheryn E.; Rashkin, Samuel; Huelman, Pat

    2015-03-11

    The U.S. Department of Energys (DOE) residential research and demonstration program, Building America, has triumphed through 20 years of innovation. Partnering with researchers, builders, remodelers, and manufacturers to develop innovative processes like advanced framing and ventilation standards, Building America has proven an energy efficient design can be more cost effective, healthy, and durable than a standard house. As Building America partners continue to achieve their stretch goals, they have found that the barrier to true market transformation for high performance homes is the limited knowledge-base of the professionals working in the building industry. With dozens of professionals taking part in the design and execution of building and selling homes, each person should have basic building science knowledge relevant to their role, and an understanding of how various home components interface with each other. Instead, our industry typically experiences a fragmented approach to home building and design. After obtaining important input from stakeholders at the Building Science Education Kick-Off Meeting, DOE created a building science education strategy addressing education issues preventing the widespread adoption of high performance homes. This strategy targets the next generation and provides valuable guidance for the current workforce. The initiative includes: Race to Zero Student Design Competition: Engages universities and provides students who will be the next generation of architects, engineers, construction managers and entrepreneurs with the necessary skills and experience they need to begin careers in clean energy and generate creative solutions to real world problems. Building Science to Sales Translator: Simplifies building science into compelling sales language and tools to sell high performance homes to their customers. Building Science Education Guidance: Brings together industry and academia to solve problems related to building science education. This report summarizes the steps DOE has taken to develop guidance for building science education and outlines a path forward towards creating real change for an industry in need. The Guidelines for Building Science Education outlined in Appendix A of this report have been developed for external stakeholders to use to certify that their programs are incorporating the most important aspects of building science at the most appropriate proficiency level for their role. The guidelines are intended to be used primarily by training organizations, universities, and certification bodies. Each guideline can be printed or saved as a stand-alone document for ease-of-use by the respective stakeholder group. In 2015, DOE, with leadership from Pacific Northwest National Laboratory (PNNL), is launching a multi-year campaign to promote the adoption of the Guidelines for Building Science Education in a variety of training settings.

  20. Low-energy D{sup +} and H{sup +} ion irradiation effects on highly oriented pyrolytic graphite

    SciTech Connect (OSTI)

    Kue Park, Jun; Won Lee, Kyu; Hee Han, Jun; Jung Kweon, Jin; Kim, Dowan; Eui Lee, Cheol [Department of Physics and Institute for Nano Science, Korea University, Seoul 136-713 (Korea, Republic of)] [Department of Physics and Institute for Nano Science, Korea University, Seoul 136-713 (Korea, Republic of); Lim, Sun-Taek; Kim, Gon-Ho [Department of Nuclear Engineering, Seoul National University, Seoul 151-744 (Korea, Republic of)] [Department of Nuclear Engineering, Seoul National University, Seoul 151-744 (Korea, Republic of); Noh, S. J.; Kim, H. S. [Department of Applied Physics, Dankook University, Yongin 448-701 (Korea, Republic of)] [Department of Applied Physics, Dankook University, Yongin 448-701 (Korea, Republic of)

    2013-12-07

    We have investigated the low-energy (100 eV) D{sup +} and H{sup +} ion irradiation effects on the structural and chemical properties of highly oriented pyrolytic graphite (HOPG). Structural disorder due to the ion irradiation was identified by the Raman spectroscopy, the D{sup +} irradiation giving rise to greater structural disorder than the H{sup +} irradiation. Only sp{sup 2} bonding was identified in the X-ray photoemission spectroscopy of the D{sup +}-irradiated HOPG, indicating no change in the surface chemical structure. The H{sup +} irradiation, on the other hand, gave rise to sp{sup 3} bonding and ???{sup *} transition, the sp{sup 3} bonding increasing with increasing irradiation dose. It is thus shown that the chemical properties of the HOPG surface may be sensitively modified by the low-energy H{sup +} ion irradiation, but not by the low-energy D{sup +} ion irradiation.

  1. Determination of the Surface Structure of CeO2(111) by Low-Energy Electron

    Office of Scientific and Technical Information (OSTI)

    Diffraction. (Journal Article) | SciTech Connect Determination of the Surface Structure of CeO2(111) by Low-Energy Electron Diffraction. Citation Details In-Document Search Title: Determination of the Surface Structure of CeO2(111) by Low-Energy Electron Diffraction. Abstract not provided. Authors: McCarty, Kevin F. ; Siegel, David A ; El Gabaly Marquez, Farid ; Chueh, William ; de la Figuera, Juan ; Blanco-Rey, Maria Publication Date: 2013-06-01 OSTI Identifier: 1113313 Report Number(s):

  2. Electromagnetic Design of RF Cavities for Accelerating Low-Energy Muons

    SciTech Connect (OSTI)

    Kurennoy, Sergey S.

    2012-05-14

    A high-gradient linear accelerator for accelerating low-energy muons and pions in a strong solenoidal magnetic field has been proposed for homeland defense and industrial applications. The acceleration starts immediately after collection of pions from a target in a solenoidal magnetic field and brings decay muons, which initially have kinetic energies mostly around 15-20 MeV, to 200 MeV over a distance of {approx}10 m. At this energy, both ionization cooling and further, more conventional acceleration of the muon beam become feasible. A normal-conducting linac with external-solenoid focusing can provide the required large beam acceptances. The linac consists of independently fed zero-mode (TM{sub 010}) RF cavities with wide beam apertures closed by thin conducting edge-cooled windows. Electromagnetic design of the cavity, including its RF coupler, tuning and vacuum elements, and field probes, has been developed with the CST MicroWave Studio, and is presented.

  3. Improved design of proton source and low energy beam transport line for European Spallation Source

    SciTech Connect (OSTI)

    Neri, L. Celona, L.; Gammino, S.; Mascali, D.; Castro, G.; Ciavola, G.; Torrisi, G.; Dipartimento di Ingegneria dellInformazione, delle Infrastrutture e dellEnergia Sostenibile, Universit Mediterranea di Reggio Calabria, Via Graziella, 89122 Reggio Calabria ; Cheymol, B.; Ponton, A.; Galat, A.; Patti, G.; Laboratori Nazionali di Legnaro, Istituto Nazionale di Fisica Nucleare, Viale dell'universit 2, 35020 Legnaro ; Gozzo, A.; Lega, L.; Dipartimento di Ingegneria Informatica e delle Telecomunicazioni, Universit degli Studi di Catania, Viale Andrea Doria 6, 95123 Catania

    2014-02-15

    The design update of the European Spallation Source (ESS) accelerator is almost complete and the construction of the prototype of the microwave discharge ion source able to provide a proton beam current larger than 70 mA to the 3.6 MeV Radio Frequency Quadrupole (RFQ) started. The source named PS-ESS (Proton Source for ESS) was designed with a flexible magnetic system and an extraction system able to merge conservative solutions with significant advances. The ESS injector has taken advantage of recent theoretical updates and new plasma diagnostics tools developed at INFN-LNS (Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare). The design strategy considers the PS-ESS and the low energy beam transport line as a whole, where the proton beam behaves like an almost neutralized non-thermalized plasma. Innovative solutions have been used as hereinafter described. Thermo-mechanical optimization has been performed to withstand the chopped beam and the misaligned focused beam over the RFQ input collimator; the results are reported here.

  4. Experience with low-energy gold-gold operations in RHIC during FY 2010

    SciTech Connect (OSTI)

    Montag, C.; Satogata, T.; Ahrens, L.A.; Bai, M.; Beebe-Wang, J.; Blacker, I.; et al

    2011-10-07

    During Run-10, RHIC operated at several different Au-Au collision energies, as requested mainly by the STAR collaboration in a quest to search for the critical point in the QGP phase diagram. The center-of-mass energies {radical}s{sub NN} are listed in Table 1, together with the respective start and end dates and the duration of the respective run at each energy. While STAR defines 'low energy' as anything below {radical}s{sub NN} = 39 GeV, we focus in the scope of this paper on energies below the regular RHIC injection energy of {radical}s{sub NN} {approx} 20 GeV, since this energy regime is particularly challenging for stable RHIC operations. Figures 1 and 2 show the evolution of beam intensity and luminosity during the course of the {radical}s{sub NN} = 7.7 GeV and 11.5 GeV run. In the following sections we will recapitulate the modifications during the run that led to significant performance improvements, and summarize what was learned at the various energies for possible application in future runs.

  5. Discrete Dipole Approximation for Low-Energy Photoelectron Emission from NaCl Nanoparticles

    SciTech Connect (OSTI)

    Berg, Matthew J.; Wilson, Kevin R.; Sorensen, Chris; Chakrabarti, Amit; Ahmed, Musahid

    2011-09-22

    This work presents a model for the photoemission of electrons from sodium chloride nanoparticles 50-500 nm in size, illuminated by vacuum ultraviolet light with energy ranging from 9.4-10.9 eV. The discrete dipole approximation is used to calculate the electromagnetic field inside the particles, from which the two-dimensional angular distribution of emitted electrons is simulated. The emission is found to favor the particle?s geometrically illuminated side, and this asymmetry is compared to previous measurements performed at the Lawrence Berkeley National Laboratory. By modeling the nanoparticles as spheres, the Berkeley group is able to semi-quantitatively account for the observed asymmetry. Here however, the particles are modeled as cubes, which is closer to their actual shape, and the interaction of an emitted electron with the particle surface is also considered. The end result shows that the emission asymmetry for these low-energy electrons is more sensitive to the particle-surface interaction than to the specific particle shape, i.e., a sphere or cube.

  6. Optical models from low-energy s-, p- and d-wave cross sections

    SciTech Connect (OSTI)

    Johnson, C.H.

    1984-01-01

    From transmission measurements with good resolution at low energies one can obtain data on the optical model potential (OMP) for individual partical waves by first making a multilevel analysis to isolate the partial waves and then averaging for comparison to the OMP. For each J..pi.. the averaging yields two quantities which are related to the amplitude and phase of the OMP scattering function or, alternatively, to the volume integrals of the real and imaginary potentials. Historically, the experimental average have been represented by the s- and p-wave strength functions, S/sub 0/ and S/sub 1/, and the s-wave scattering radius R'. To make full use of data from modern time-of-flight facilities such as ORELA it is necessary to re-examine the averaging procedure in order to extend it upward both in energy and neutron l-value. This averaging is discussed and applied to data on /sup 30/Si, /sup 32/S, /sup 34/S, /sup 40/Ca, /sup 60/Ni, /sup 86/Kr and /sup 208/Pb. The resulting OMP shows a systematic real potential with some indication of a parity dependence. The imaginary potential shows considerable fluctuations indicating the importance of nuclear structure at neutron eneries below 1 MeV. A coupled channel OMP is also discussed for some of the nulei. 19 references.

  7. ON THE CORRELATION OF LOW-ENERGY SPECTRAL INDICES AND REDSHIFTS OF GAMMA-RAY BURSTS

    SciTech Connect (OSTI)

    Geng, J. J.; Huang, Y. F., E-mail: hyf@nju.edu.cn [Department of Astronomy, Nanjing University, Nanjing 210093 (China)

    2013-02-10

    It was found by Amati et al. in 2002 that for a small sample of nine gamma-ray bursts (GRBs), more distant events appear to be systematically harder in the soft gamma-ray band. Here, we have collected a larger sample of 65 GRBs, whose time-integrated spectra are well established and can be well fitted with the so-called Band function. It is confirmed that a correlation between the redshifts (z) and the low-energy indices ({alpha}) of the Band function does exist, though it is a bit more scattered than the result of Amati et al. This correlation cannot be simply attributed to the effect of photon reddening. Furthermore, correlations between {alpha} and E {sub peak} (the peak energy in the {nu}F {sub {nu}} spectrum in the rest frame), {alpha} and E {sub iso} (the isotropic energy release), and {alpha} and L {sub iso} (the isotropic luminosity) are also found, which indicate that these parameters are somehow connected. The results may provide useful constraints on the physics of GRBs.

  8. Elastic scattering of low-energy electrons by 1,4-dioxane

    SciTech Connect (OSTI)

    Barbosa, Alessandra Souza; Bettega, Mrcio H. F.

    2014-05-14

    We report calculated cross sections for elastic collisions of low-energy-electrons with 1,4-dioxane. Our calculations employed the Schwinger multichannel method with pseudopotentials and were carried out in the static-exchange and static-exchange plus polarization approximations for energies up to 30 eV. Our results show the presence of three shape resonances belonging to the B{sub u}, A{sub u}, and B{sub g} symmetries and located at 7.0 eV, 8.4 eV, and 9.8 eV, respectively. We also report the presence of a Ramsauer-Townsend minimum located at around 0.05 eV. We compare our calculated cross sections with experimental data and R-matrix and independent atom model along with the additivity rule corrected by using screening coefficients theoretical results for 1,4-dioxane obtained by Palihawadana et al. [J. Chem. Phys. 139, 014308 (2013)]. The agreement between the present and the R-matrix theoretical calculations of Palihawadana et al. is relatively good at energies below 10 eV. Our calculated differential cross sections agree well with the experimental data, showing only some discrepancies at higher energies.

  9. Design of the low energy beam transport line between CARIBU and the EBIS charge breeder

    SciTech Connect (OSTI)

    Perry, A.; Ostroumov, P. N.; Barcikowski, A.; Dickerson, C.; Kondrashev, S. A.; Mustapha, B.; Savard, G.

    2015-01-09

    An Electron Beam Ion Source Charge Breeder (EBIS-CB) has been developed to breed radioactive beams from the CAlifornium Rare Isotope Breeder Upgrade (CARIBU) facility at ATLAS. The EBIS-CB will replace the existing ECR charge breeder to increase the intensity and improve the purity of reaccelerated radioactive ion beams. The EBIS-CB is in the final stage of off-line commissioning. Currently, we are developing a low energy beam transport (LEBT) system to transfer CARIBU beams to the EBIS-CB. As was originally planned, an RFQ cooler-buncher will precede the EBIS-CB. Recently, it was decided to include a multi-reflection time-of-flight (MR-TOF) mass-spectrometer following the RFQ. MR-TOF is a relatively new technology used to purify beams with a mass-resolving power up to 310{sup 5} as was demonstrated in experiments at CERN/ISOLDE. Very high purity singly-charged radioactive ion beams will be injected into the EBIS for charge breeding and due to its inherent properties, the EBIS-CB will maintain the purity of the charge bred beams. Possible contamination of residual gas ions will be greatly suppressed by achieving ultra-high vacuum in the EBIS trap. This paper will present and discuss the design of the LEBT and the overall integration of the EBIS-CB into ATLAS.

  10. Predicting Low Energy Dopant Implant Profiles in Semiconductors using Molecular Dynamics

    SciTech Connect (OSTI)

    Beardmore, K.M.; Gronbech-Jensen, N.

    1999-05-02

    The authors present a highly efficient molecular dynamics scheme for calculating dopant density profiles in group-IV alloy, and III-V zinc blende structure materials. Their scheme incorporates several necessary methods for reducing computational overhead, plus a rare event algorithm to give statistical accuracy over several orders of magnitude change in the dopant concentration. The code uses a molecular dynamics (MD) model to describe ion-target interactions. Atomic interactions are described by a combination of 'many-body' and pair specific screened Coulomb potentials. Accumulative damage is accounted for using a Kinchin-Pease type model, inelastic energy loss is represented by a Firsov expression, and electronic stopping is described by a modified Brandt-Kitagawa model which contains a single adjustable ion-target dependent parameter. Thus, the program is easily extensible beyond a given validation range, and is therefore truly predictive over a wide range of implant energies and angles. The scheme is especially suited for calculating profiles due to low energy and to situations where a predictive capability is required with the minimum of experimental validation. They give examples of using the code to calculate concentration profiles and 2D 'point response' profiles of dopants in crystalline silicon and gallium-arsenide. Here they can predict the experimental profile over five orders of magnitude for <100> and <110> channeling and for non-channeling implants at energies up to hundreds of keV.

  11. The contribution of low-energy protons to the total on-orbit SEU rate

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Dodds, Nathaniel Anson; Martinez, Marino J.; Dodd, Paul E.; Shaneyfelt, Marty R.; Sexton, Frederick W.; Black, Jeffrey D.; Lee, David S.; Swanson, Scot E.; Bhuva, B. L.; Warren, K. M.; et al

    2015-11-10

    Low- and high-energy proton experimental data and error rate predictions are presented for many bulk Si and SOI circuits from the 20-90 nm technology nodes to quantify how much low-energy protons (LEPs) can contribute to the total on-orbit single-event upset (SEU) rate. Every effort was made to predict LEP error rates that are conservatively high; even secondary protons generated in the spacecraft shielding have been included in the analysis. Across all the environments and circuits investigated, and when operating within 10% of the nominal operating voltage, LEPs were found to increase the total SEU rate to up to 4.3 timesmore » as high as it would have been in the absence of LEPs. Therefore, the best approach to account for LEP effects may be to calculate the total error rate from high-energy protons and heavy ions, and then multiply it by a safety margin of 5. If that error rate can be tolerated then our findings suggest that it is justified to waive LEP tests in certain situations. Trends were observed in the LEP angular responses of the circuits tested. As a result, grazing angles were the worst case for the SOI circuits, whereas the worst-case angle was at or near normal incidence for the bulk circuits.« less

  12. Polymer surfaces graphitization by low-energy He{sup +} ions irradiation

    SciTech Connect (OSTI)

    Geworski, A.; Lazareva, I.; Gieb, K.; Koval, Y.; Mller, P. [Department of Physics, Universitt Erlangen-Nrnberg, Erwin-Rommel-Str. 1, 91058 Erlangen (Germany)

    2014-08-14

    The electrical and optical properties of surfaces of polyimide and AZ5214e graphitized by low-energy (1?keV) He{sup +} irradiation at different polymer temperatures were investigated. The conductivity of the graphitized layers can be controlled with the irradiation temperature within a broad range and can reach values up to ?1000?S/cm. We show that the electrical transport in low-conducting samples is governed by thermally activated hopping, while the samples with a high conductivity show a typical semimetallic behavior. The transition from thermally activated to semimetallic conductance governed by the irradiation temperature could also be observed in optical measurements. The semimetallic samples show an unusually high for graphitic materials carrier concentration, which results in a high extinction coefficient in the visible light range. By analyzing the temperature dependence of the conductance of the semimetallic samples, we conclude that the scattering of charge carriers is dominated by Coulomb interactions and can be described by a weak localization model. The transition from a three to two dimensional transport mechanism at low temperatures consistently explains the change in the temperature dependence of the conductance by cooling, observed in experiments.

  13. Low-energy Coulomb excitation of neutron-rich zinc isotopes

    SciTech Connect (OSTI)

    Walle, J. van de; Aksouh, F.; Bildstein, V.; Blazhev, A.; Eberth, J.; Jolie, J.; Reiter, P.; Warr, N.; Weisshaar, D.; Cederkaell, J.; Delahaye, P.; Fedosseev, V. N.; Franchoo, S.; Marsh, B. A.; Sieber, T.; Voulot, D.

    2009-01-15

    At the radioactive ion beam facility REX-ISOLDE, neutron-rich zinc isotopes were investigated using low-energy Coulomb excitation. These experiments have resulted in B(E2,2{sub 1}{sup +}{yields}0{sub 1}{sup +}) values in {sup 74-80}Zn, B(E2,4{sub 1}{sup +}{yields}2{sub 1}{sup +}) values in {sup 74,76}Zn and the determination of the energy of the first excited 2{sub 1}{sup +} states in {sup 78,80}Zn. The zinc isotopes were produced by high-energy proton- (A=74,76,80) and neutron- (A=78) induced fission of {sup 238}U, combined with selective laser ionization and mass separation. The isobaric beam was postaccelerated by the REX linear accelerator and Coulomb excitation was induced on a thin secondary target, which was surrounded by the MINIBALL germanium detector array. In this work, it is shown how the selective laser ionization can be used to deal with the considerable isobaric beam contamination and how a reliable normalization of the experiment can be achieved. The results for zinc isotopes and the N=50 isotones are compared to collective model predictions and state-of-the-art large-scale shell-model calculations, including a recent empirical residual interaction constructed to describe the present experimental data up to 2004 in this region of the nuclear chart.

  14. Development of a low energy ion source for ROSINA ion mode calibration

    SciTech Connect (OSTI)

    Rubin, Martin; Altwegg, Kathrin; Jaeckel, Annette; Balsiger, Hans

    2006-10-15

    The European Rosetta mission on its way to comet 67P/Churyumov-Gerasimenko will remain for more than a year in the close vicinity (1 km) of the comet. The two ROSINA mass spectrometers on board Rosetta are designed to analyze the neutral and ionized volatile components of the cometary coma. However, the relative velocity between the comet and the spacecraft will be minimal and also the velocity of the outgassing particles is below 1 km/s. This combination leads to very low ion energies in the surrounding plasma of the comet, typically below 20 eV. Additionally, the spacecraft may charge up to a few volts in this environment. In order to simulate such plasma and to calibrate the mass spectrometers, a source for ions with very low energies had to be developed for the use in the laboratory together with the different gases expected at the comet. In this paper we present the design of this ion source and we discuss the physical parameters of the ion beam like sensitivity, energy distribution, and beam shape. Finally, we show the first ion measurements that have been performed together with one of the two mass spectrometers.

  15. Building America Expert Meeting Report: Hydronic Heating in Multifamily Buildings

    SciTech Connect (OSTI)

    Dentz, J.

    2011-10-01

    The topic of this expert meeting was cost-effective controls and distribution retrofit options for hot water and steam space heating systems in multi-family buildings with the goals of reducing energy waste and improving occupant comfort. The U.S. Department of Energy's Building America program develops technologies with the goal of reducing energy use by 30% to 50% in residential buildings. Toward this goal, the program sponsors 'Expert Meetings' focused on specific building technology topics. The meetings are intended to sharpen Building America research priorities, create a forum for sharing information among industry leaders and build partnerships with professionals and others that can help support the program's research needs and objectives. The topic of this expert meeting was cost-effective controls and distribution retrofit options for hot water and steam space heating systems in multifamily buildings with the goals of reducing energy waste and improving occupant comfort. The objectives of the meeting were to: (1) Share knowledge and experience on new and existing solutions: what works, what doesn't and why, and what's new; (2) Understand the market barriers to currently offered solutions: what disconnects exist in the market and what is needed to overcome or bridge these gaps; and (3) Identify research needs.

  16. Commercial Building Stock Assessment: Findings and Opportunities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NORTHWEST ENERGY EFFICIENCY ALLIANCE 2014 Commercial Building Stock Assessment: BPA Brown Bag May 20, 2015 Christopher Frye Senior Manager, Market Research and Evaluation Aaron...

  17. Building America Expert Meeting: Retrofit Implementation - A...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Implementation - A Neighborhood at a Time This report provides information about a Building America expert meeting hosted by research team Consortium for Advanced...

  18. Building America Webinar: Ductless Hydronic Distribution Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This webinar was presented by research team Alliance for Residential Building Innovation (ARBI), and reviewed findings from a feasibility study of ductless hydronic distribution ...

  19. Building America Expert Meeting: Delivering Better, Cheaper,...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Better, Cheaper, and Faster Retrofits through Stakeholder-focused Research Building America Expert Meeting: Delivering Better, Cheaper, and Faster Retrofits through...

  20. Energy 101: Energy Efficient Commercial Buildings

    SciTech Connect (OSTI)

    2014-03-14

    Learn how commercial buildings can incorporate whole-building design to save energy and money while enhancing performance and comfort. This video highlights several energy-saving features of the Research Support Facility at the Energy Department's National Renewable Energy Laboratory-a model for high-performance office building design.

  1. Energy 101: Energy Efficient Commercial Buildings

    ScienceCinema (OSTI)

    None

    2014-06-26

    Learn how commercial buildings can incorporate whole-building design to save energy and money while enhancing performance and comfort. This video highlights several energy-saving features of the Research Support Facility at the Energy Department's National Renewable Energy Laboratory-a model for high-performance office building design.

  2. Building America Technology Solutions for New and Existing Homes: Selecting Ventilation Systems for Existing Homes

    Broader source: Energy.gov [DOE]

    This research effort by the Building America team, Consortium for Advanced Residential Buildings, evaluated four different strategies for provide make-up air to multifamily residential buildings, which included several weeks of building pressure monitoring.

  3. Btu)","per Building

    U.S. Energy Information Administration (EIA) Indexed Site

    ,"Number of Buildings (thousand)","Floorspace (million square feet)","Floorspace per Building (thousand square feet)","Total (trillion Btu)","per Building (million Btu)","per...

  4. Building Energy Code

    Broader source: Energy.gov [DOE]

    The Rhode Island Building Code Standards Committee adopts, promulgates and administers the state building code. Compliance is determined through the building permit and inspection process by local...

  5. 1999 Commercial Buildings Characteristics

    U.S. Energy Information Administration (EIA) Indexed Site

    Data Reports > 2003 Building Characteristics Overview 1999 Commercial Buildings Energy Consumption SurveyCommercial Buildings Characteristics Released: May 2002 Topics: Energy...

  6. Better Buildings Challenge-- Milwaukee

    Broader source: Energy.gov [DOE]

    Lead Performer: City of Milwaukee – Milwaukee, WI Partners: -- Franklin Energy, LLC – Port Washington, WI -- Milwaukee Area Technical College – Milwaukee, WI -- Midwest Energy Research Consortium – Milwaukee, WI -- Staples Energy – Pewaukee, WI -- Milwaukee Business Improvement Districts – Milwaukee, WI -- Transwestern Sustainability Services – Milwaukee, WI -- U.S. Green Building Council – Wisconsin Chapter – Milwaukee, WI -- Office of Energy Innovation – Madison, WI -- Focus on Energy – Madison, WI -- BOMA-Wisconsin – Milwaukee, WI

  7. 350 City County Building

    Office of Legacy Management (LM)

    (. - ,- Department of Eilqgy Washington, DC20585 ,. i x \ .The Honorable Wellington E. Webb .' '. ' 350 City County Building / Denver, Colorado 80202 ., ; Dear Mayor Webb: ., ~, Secretary of Energy' Hazel O'Leary has announced's new approach to openness in the Department of Energy,(OOE) and its communications with the public. In support of this initiative, we,are pleased to forward the'enclosed'information related to the former Uhiversity of Denver Research Institute site in your, jurisdiction

  8. Building Energy Monitoring and Analysis

    SciTech Connect (OSTI)

    Hong, Tianzhen; Feng, Wei; Lu, Alison; Xia, Jianjun; Yang, Le; Shen, Qi; Im, Piljae; Bhandari, Mahabir

    2013-06-01

    U.S. and China are the worlds top two economics. Together they consumed one-third of the worlds primary energy. It is an unprecedented opportunity and challenge for governments, researchers and industries in both countries to join together to address energy issues and global climate change. Such joint collaboration has huge potential in creating new jobs in energy technologies and services. Buildings in the US and China consumed about 40% and 25% of the primary energy in both countries in 2010 respectively. Worldwide, the building sector is the largest contributor to the greenhouse gas emission. Better understanding and improving the energy performance of buildings is a critical step towards sustainable development and mitigation of global climate change. This project aimed to develop a standard methodology for building energy data definition, collection, presentation, and analysis; apply the developed methods to a standardized energy monitoring platform, including hardware and software, to collect and analyze building energy use data; and compile offline statistical data and online real-time data in both countries for fully understanding the current status of building energy use. This helps decode the driving forces behind the discrepancy of building energy use between the two countries; identify gaps and deficiencies of current building energy monitoring, data collection, and analysis; and create knowledge and tools to collect and analyze good building energy data to provide valuable and actionable information for key stakeholders.

  9. Building America Building Science Translator

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building Science Translator February 2015 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, subcontractors, or affliated partners, make any warranty, express or implied, or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represent that its use

  10. Office Buildings - Types of Office Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    administration building Insurance company headquarters building Local insurance agency Social services office Attorney's office Real estate sales office Government office State...

  11. 1999 Commercial Buildings Characteristics--Building Size

    U.S. Energy Information Administration (EIA) Indexed Site

    (202) 586-8800. Energy Information Administration Commercial Buildings Energy Consumption Survey Top Return to: "1999 CBECS-Commercial Buildings Characteristics" Specific questions...

  12. Buildings Interoperability Planning: Connected Buildings Interoperabil...

    Broader source: Energy.gov (indexed) [DOE]

    Vision Context Steve Widergren PNNL 11 March 2015 Topics Purpose of meeting Buildings automation in the transformative time of connectivity Interoperability - a connected buildings...

  13. Building Technologies Program: Building America Publications

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and existing homes provided by the Building America Program.You may also visit the new Solution Center to find expert building science and energy efficiency resources. RSS...

  14. Making America's Buildings Better (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-03-01

    This fact sheet is an overview of the U.S. Department of Energy's Building Technologies program. Buildings use more energy than any other sector of the U.S. economy? In fact, buildings consume more than 70% of the electricity and more than 50% of the natural gas Americans use. That's why the U.S. Department of Energy's (DOE's) Building Technologies Program (BTP) is working to improve building energy performance through high-impact research, out-reach, and regulatory efforts. These efforts will result in affordable, high-performance homes and commercial buildings. These grid-connected buildings will be more energy efficient than today's typical buildings, with renewable energy providing a portion of the power needs. They will combine energy-smart 'whole building' design and construction, appliances and equipment that minimize plug loads, and cost-effective photovoltaics or other on-site energy systems.

  15. GE Global Research Careers | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Finding solutions in energy, health and home, transportation and finance. Building, ... path at GE Global Research guides scientists' and engineers' individual development. ...

  16. Building America Update - February 8, 2013

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    February 8, 2013 This announcement brings you the latest information about news, activities, and publications from the U.S. Department of Energy's Building America program. Please forward this message to colleagues who may be interested in subscribing to future Building America Update newsletters. Introducing the Solution Center: Easy Access to World-Class Research Be sure to check out the new Building America Solution Center, an online resource that links you to fast, free, and expert building

  17. Building America Meetings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    News & Events » Building America Meetings Building America Meetings Photo of people watching a presentation on a screen the foreground shows a person's hands taking notes on a notepad. The Department of Energy's (DOE) Building America program hosts open meetings and webinars for industry partners and stakeholders that provide a forum to exchange information about various aspects of residential building research. Current Webinars Past Webinars Upcoming Meetings Past Technical and Stakeholder

  18. Wisdom Way Solar Village: Design, Construction, and Analysis of a Low Energy Community

    SciTech Connect (OSTI)

    Aldrich, Robb

    2012-08-01

    This report describes work conducted at the Wisdom Way Solar Village (WWSV), a community of 10 high performance duplexes (20 homes) in Greenfield, MA, constructed by Rural Development, Inc. (RDI). Building America's CARB team monitored temperatures and comfort in several homes during the winter of 2009-2010, and tracked utility bill information from 13 occupied homes. Because of efficient lights, appliances, and conscientious home occupants, the energy generated by the solar electric systems exceeded the electric energy used in most homes.

  19. Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Mixed-Humid Climates; January 2006 - December 2006

    SciTech Connect (OSTI)

    Anderson, R.; Hendron, R.; Eastment, M.; Jalalzadeh-Azar, A.

    2006-12-01

    This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Mixed-Humid Climate Region on a cost-neutral basis.

  20. Low-Energy Nuclear Reactions of Protons in Host Metals at Picometre Distance

    SciTech Connect (OSTI)

    Heinrich Hora; George H. Miley; Jak C. Kelly

    2000-11-12

    A review is given for the explanation of the measurements of Miley et al. of a fully reproducible generation of nuclei of the whole periodic table by protons in host metals during a several-weeks reaction. Similar low-energy nuclear reactions (LENR) were observed by other groups. The fact that the heavy nuclides are not due to pollution can be seen from the fact that such very rare elements as thulium and terbium were detected by unique K-shell X-ray spectra. The nuclear reaction energy goes into the heavy nuclei as measured from much bigger traces in CR39 than from alphas. The fact that any reaction of the protons results in stable daughter nuclei is confirmed by the fact that the highest energy gain is resulting with stable reaction products. This has been explained in Ref. 2, and the energy gain for the heavy element generation by a compound reaction was discussed. The explanation is based on the model of the authors from 1989 to assume free motion of the protons contrary to localized crystalline states. A relation of the reaction time U on distance d of the reacting nuclei by a power law with an exponent 34.8 was derived. Based on few reproducible D-D reactions, a reaction time near the range of megaseconds and a reaction distance of nanometers was concluded. A splendid confirmation of the picometre-megasecond reactions was achieved by Li et al. from his direct quantum mechanical calculations of the hot fusion D-T reactions based on a one-step selective resonance tunneling model. Li et al. were able for the first time to derive the cross sections of the hot fusion. Li's application to picometre distance showed megasecond reaction times with no neutron or gamma emission. Because of the imaginary part in the Schroedinger potential, the problem of the level width is reduced by damping.

  1. 1999 Commercial Building Characteristics--Building Activity Comparison

    U.S. Energy Information Administration (EIA) Indexed Site

    Building Activity Comparison Percentage of Floorspace and Buildings by Principal Building Activity, 1999 Percentage of Floorspace and Buildings by Principal Building Activity,...

  2. BSC: Building America, Building Science Consortium - 2015 Peer...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Review BSC: Building America, Building Science Consortium - 2015 Peer Review Presenter: Joe Lstiburek, Building Science Corp. View the Presentation BSC: Building America, Building...

  3. Buildings*","Lit Buildings","Lighting Equipment Types

    U.S. Energy Information Administration (EIA) Indexed Site

    Lighting Equipment, Number of Buildings for Non-Mall Buildings, 2003" ,"Number of Buildings (thousand)" ,"All Buildings*","Lit Buildings","Lighting Equipment Types (more than one ...

  4. High Performance Homes That Use 50% Less Energy Than the DOE Building America Benchmark Building

    SciTech Connect (OSTI)

    Christian, J.

    2011-01-01

    This document describes lessons learned from designing, building, and monitoring five affordable, energy-efficient test houses in a single development in the Tennessee Valley Authority (TVA) service area. This work was done through a collaboration of Habitat for Humanity Loudon County, the US Department of Energy (DOE), TVA, and Oak Ridge National Laboratory (ORNL).The houses were designed by a team led by ORNL and were constructed by Habitat's volunteers in Lenoir City, Tennessee. ZEH5, a two-story house and the last of the five test houses to be built, provided an excellent model for conducting research on affordable high-performance houses. The impressively low energy bills for this house have generated considerable interest from builders and homeowners around the country who wanted a similar home design that could be adapted to different climates. Because a design developed without the project constraints of ZEH5 would have more appeal for the mass market, plans for two houses were developed from ZEH5: a one-story design (ZEH6) and a two-story design (ZEH7). This report focuses on ZEH6, identical to ZEH5 except that the geothermal heat pump is replaced with a SEER 16 air source unit (like that used in ZEH4). The report also contains plans for the ZEH6 house. ZEH5 and ZEH6 both use 50% less energy than the DOE Building America protocol for energyefficient buildings. ZEH5 is a 4 bedroom, 2.5 bath, 2632 ft2 house with a home energy rating system (HERS) index of 43, which qualifies it for federal energy-efficiency incentives (a HERS rating of 0 is a zero-energy house, and a conventional new house would have a HERS rating of 100). This report is intended to help builders and homeowners build similar high-performance houses. Detailed specifications for the envelope and the equipment used in ZEH5 are compared with the Building America Benchmark building, and detailed drawings, specifications, and lessons learned in the construction and analysis of data gleaned from 94 sensors installed in ZEH5 to monitor electric sub-metered usage, temperature and relative humidity, hot water usage, and heat pump operation for 1 year are presented. This information should be particularly useful to those considering structural insulated panel (SIP) walls and roofing; foundation geothermal heat pumps for space heating and cooling; solar water heaters; and roof-mounted, grid-tied photovoltaic systems. The document includes plans for ZEH6 (adapted from ZEH5), a one-story, high-performance house, as well as projections of how the design might perform in five major metropolitan areas across the TVA service territory. The HERS ratings for this all-electric house vary from 36 (Memphis, Tennessee) to 46 (Bristol, Tennessee).

  5. Constraints on the Low-Energy Cutoff in the Electron Distributionof the PKS 0637--752 Jet

    SciTech Connect (OSTI)

    Mueller, M.; /SLAC /KIPAC, Menlo Park

    2007-06-26

    We re-analyze the Chandra X-ray spectrum of the kpc-scale jet in PKS 0637-752 to investigate the possible low energy cutoff in the relativistic electron spectrum producing the non-thermal radiation in the scenario of inverse Compton emission off the cosmic microwave background. This was among the first objects targeted by the Chandra Observatory and gives a unique opportunity to study the low energy X-ray emission free of contamination. As previously noted, the spectrum can be fit by a power law, with the slope predicted by the radio spectrum, modified by low energy absorption through the Galaxy as determined from the spectrum of the quasar core and by HI 21 cm observations. We report evidence for a broad excess of emission below 1 keV, but are unable to constrain the shape very well. If we assume that this soft excess is unrelated to the electron population responsible for the power law emission, and that the electron spectrum cuts off at an energy of {gamma}{sub min}m{sub e}c{sup 2}, then we must have {gamma}{sub min} ({Lambda}/10) {approx}< 75 due to the absence of any low energy turn-over in the X-ray spectrum. This predicts that the observed radio spectrum should extend unbroken down below 2 MHz for the estimated jet restframe magnetic field B = 10 {micro} G. In addition, the observed optical flux can be used to place a lower limit on {gamma}{sub min}; the constraint is not very strong, but does suggest that {gamma}{sub min} must be higher than 1 to avoid overproducing the optical emission. The implication of these limits on the jet luminosity is discussed. An alternative phenomenological description of the soft excess is offered where the low-energy end of the electron spectrum is modified to account for the excess.

  6. Buildings | Open Energy Information

    Open Energy Info (EERE)

    influence a building, including incentives, utilities, weather, climate, and locationground temperature. Municipalities and Renewable Energy Opportunities Building...

  7. Building Technologies Office Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Roland Risser Director, Building Technologies Office Building Technologies Office Overview Our Homes and Buildings Use 40% of Our Nation's Energy and 75% of Electricity Energy Use Electricity Use Residential Transportation 21 quads 27 quads Commercial 18 quads Industrial 31 quads U.S. Energy Bill for Buildings: $410 billion per year 2 Building Technologies Office (BTO) Ecosystem Emerging Technologies Building Codes Appliance Standards Residential Buildings Integration Commercial Buildings

  8. Building Envelope Stakeholder Workshop

    Broader source: Energy.gov [DOE]

    Oak Ridge National Laboratory is hosting a building envelope stakeholder workshop on behalf of the DOE Building Technologies Office.

  9. Building America Building Science Education Roadmap

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building Science Education Roadmap April 2013 Contents Introduction ................................................................................................................................ 3 Background ................................................................................................................................. 4 Summit Participants .................................................................................................................... 5 Key Results

  10. Metal Buildings - 2014 BTO Peer Review | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Metal Buildings - 2014 BTO Peer Review Metal Buildings - 2014 BTO Peer Review Presenter: Heather Buckberry, Oak Ridge National Laboratory This project aims to increase energy efficiency in metal buildings through research into areas specifically targeted by metal building industry leaders. In collaboration with the Metal Building Manufacturer Association (MBMA) (the principal technical resource for the metal building industry), the project addresses infiltration issues that can reduce heating,

  11. Building America Tools and Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    America Tools and Resources Building America Tools and Resources The Building America Program provides homeowners, researchers, and building professionals with tools and resources to evaluate and explain high-performance buildings. Find tools and resources by type below. Building America Solution Center image_solution_center_fullsize.jpg Access expert information on hundreds of high-performance construction topics. Climate-Specific Guidance BuildingAmerica_Climate_Map2.jpg Find examples of

  12. Building America Update - May 14, 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    May 14, 2015 Building America Update - May 14, 2015 May 13, 2015 - 4:35pm Addthis Building America Research Teams: Spotlight on ARIES and NorthernSTAR Teams Race to Zero Student Design Competition: Inspiring the Next Generation of Building Scientists DOE Invests $4 Million to Strengthen Building America Industry Partnerships Building America May 20 Webinar: Resolving Codes and Standards Issues to Energy Innovations Buildings XIII Conference-Thermal Performance of the Exterior Envelopes: Call for

  13. Partner With DOE and Residential Buildings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Residential Buildings » Partner With DOE and Residential Buildings Partner With DOE and Residential Buildings The U.S. Department of Energy (DOE) partners with a variety of organizations to improve the energy efficiency of residential buildings. Home builders, governments, researchers, and universities have several opportunities to work with the Building Technologies Office and other DOE projects. Home Builders Home builders who want to be recognized for building high performance homes can find

  14. Buildings Energy Data Book: 7.1 National Legislation

    Buildings Energy Data Book [EERE]

    4 Energy Independence and Security Act 2007, High Performance Commercial Buildings Create the Office of Commercial High Performance Green Buildings The Office of Commercial High Performance Green Buildings with The Office of Federal High Performance Green Buildings will establish a High Performance Green Buildings Clearinghouse to disseminate research through outreach, education, and technical assistance Zero Net Energy Initiative for Commercial Buildings was also included establishing specific

  15. Subscribe to Building America Updates | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    » Building America » Subscribe to Building America Updates Subscribe to Building America Updates Sign up to receive e-mail notices of news and events related to the Building America program. Building America will send periodic notices which provide information related to: Improving efficiency of new and existing homes Research team projects and activities Best Practices Guides, case studies, and technical publications Residential building efficiency and system-specific expert meetings. Once

  16. INL High Performance Building Strategy

    SciTech Connect (OSTI)

    Jennifer D. Morton

    2010-02-01

    High performance buildings, also known as sustainable buildings and green buildings, are resource efficient structures that minimize the impact on the environment by using less energy and water, reduce solid waste and pollutants, and limit the depletion of natural resources while also providing a thermally and visually comfortable working environment that increases productivity for building occupants. As Idaho National Laboratory (INL) becomes the nations premier nuclear energy research laboratory, the physical infrastructure will be established to help accomplish this mission. This infrastructure, particularly the buildings, should incorporate high performance sustainable design features in order to be environmentally responsible and reflect an image of progressiveness and innovation to the public and prospective employees. Additionally, INL is a large consumer of energy that contributes to both carbon emissions and resource inefficiency. In the current climate of rising energy prices and political pressure for carbon reduction, this guide will help new construction project teams to design facilities that are sustainable and reduce energy costs, thereby reducing carbon emissions. With these concerns in mind, the recommendations described in the INL High Performance Building Strategy (previously called the INL Green Building Strategy) are intended to form the INL foundation for high performance building standards. This revised strategy incorporates the latest federal and DOE orders (Executive Order [EO] 13514, Federal Leadership in Environmental, Energy, and Economic Performance [2009], EO 13423, Strengthening Federal Environmental, Energy, and Transportation Management [2007], and DOE Order 430.2B, Departmental Energy, Renewable Energy, and Transportation Management [2008]), the latest guidelines, trends, and observations in high performance building construction, and the latest changes to the Leadership in Energy and Environmental Design (LEED) Green Building Rating System (LEED 2009). The document employs a two-level approach for high performance building at INL. The first level identifies the requirements of the Guiding Principles for Sustainable New Construction and Major Renovations, and the second level recommends which credits should be met when LEED Gold certification is required.

  17. Commercial Buildings Energy Consumption Survey - Office Buildings

    Reports and Publications (EIA)

    2010-01-01

    Provides an in-depth look at this building type as reported in the 2003 Commercial Buildings Energy Consumption Survey. Office buildings are the most common type of commercial building and they consumed more than 17% of all energy in the commercial buildings sector in 2003. This special report provides characteristics and energy consumption data by type of office building (e.g. administrative office, government office, medical office) and information on some of the types of equipment found in office buildings: heating and cooling equipment, computers, servers, printers, and photocopiers.

  18. Building America Market Partnerships | Department of Energy

    Energy Savers [EERE]

    Research » Building America Market Partnerships Building America Market Partnerships This photo shows two men silhouetted against a sky shaking hands, with the frame of a building under construction in the background. The U.S. Department of Energy (DOE) offers partnership opportunities, educational curricula, meetings, and webinars that help industry professionals bring research results to the market. Zero Energy Ready Home Through the DOE Zero Energy Ready Home (formerly DOE Challenge Home)

  19. National Green Building Standard Analysis

    SciTech Connect (OSTI)

    none,

    2012-07-01

    DOE's Building America Program is a research and development program to improve the energy performance of new and existing homes. The ultimate goal of the Building America Program is to achieve examples of cost-effective, energy efficient solutions for all U.S. climate zones. Periodic maintenance of an ANSI standard by review of the entire document and action to revise or reaffirm it on a schedule not to exceed five years is required by ANSI. In compliance, a consensus group has once again been formed and the National Green Building Standard is currently being reviewed to comply with the periodic maintenance requirement of an ANSI standard.

  20. Building America House Simulation Protocols

    SciTech Connect (OSTI)

    Hendron, Robert; Engebrecht, Cheryn

    2010-09-01

    The House Simulation Protocol document was developed to track and manage progress toward Building America's multi-year, average whole-building energy reduction research goals for new construction and existing homes, using a consistent analytical reference point. This report summarizes the guidelines for developing and reporting these analytical results in a consistent and meaningful manner for all home energy uses using standard operating conditions.

  1. Building America: Making Real Progress

    Energy Savers [EERE]

    America: Making Real Progress for U.S. Homes The U.S. Department of Energy (DOE) Building America Program conducts innovative housing research on energy efficiency to benefit the residential building industry and the public. The program has produced more than 100 innovations and accel- erated the adoption of energy-saving technologies. Since 1995, this work has helped households across the nation save up to $54 billion and avoid the emissions of 500 million tons of carbon dioxide. DOE esti-

  2. Building America Update - March 12, 2015 | Department of Energy

    Office of Environmental Management (EM)

    March 12, 2015 Building America Update - March 12, 2015 March 11, 2015 - 4:48pm Addthis Building America Research Teams: BA-PIRC and IBACOS-Pioneers in Homebuilding Innovation Building America March 18 Webinar: Research Tools-Field Test Best Practices, BEopt, and the National Residential Efficiency Measures Database Bonneville Power Administration Funding Opportunity: Phase I Deadline-March 27, 2015 DOE Issues New Standards for Water Heaters Use the Building America Solution Center to Build

  3. Building Science Solutions … Faster and Better | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solutions … Faster and Better Building Science Solutions … Faster and Better This webinar provides an overview of the DOE Building America Solution Center„a digital communication tool designed to serve building industry professionals, researchers, and market transformation programs by making world-class building science research and information quickly and easily accessible. PDF icon solution_center_beta_demo_10_17_2012.pdf More Documents & Publications DOE ZERH Resources: Building

  4. Building America Technology Solutions Case Study: Evaluation of Passive

    Energy Savers [EERE]

    Vents in New-Construction Multifamily Buildings | Department of Energy Evaluation of Passive Vents in New-Construction Multifamily Buildings Building America Technology Solutions Case Study: Evaluation of Passive Vents in New-Construction Multifamily Buildings The Consortium for Advanced Residential Buildings (CARB) conducted research to gain more insight into passive vents. Because passive vents are meant to operate in a general environment of negative apartment pressure, the research

  5. "Green" Buildings in the National Parks Will Save Taxpayers Millions of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dollars "Green" Buildings in the National Parks Will Save Taxpayers Millions of Dollars For more information contact: e:mail: Public Affairs Facilities will use 70% less energy Golden, Colo., May 11, 1998 — An ambitious program to bring energy efficiency to several of the country's most popular national parks will save taxpayers millions of dollars and highlight the benefits of low-energy, passive solar building designs. The U.S. Department of Energy's (DOE) National Renewable

  6. Building technologies program. 1995 annual report

    SciTech Connect (OSTI)

    Selkowitz, S.E.

    1996-05-01

    The 1995 annual report discusses laboratory activities in the Building Technology Program. The report is divided into four categories: windows and daylighting, lighting systems, building energy simulation, and advanced building systems. The objective of the Building Technologies program is to assist the U.S. building industry in achieving substantial reductions in building-sector energy use and associated greenhouse gas emissions while improving comfort, amenity, health, and productivity in the building sector. Past efforts have focused on windows and lighting, and on the simulation tools needed to integrate the full range of energy efficiency solutions into achievable, cost-effective design solutions for new and existing buildings. Current research is based on an integrated systems and life-cycle perspective to create cost-effective solutions for more energy-efficient, comfortable, and productive work and living environments. Sixteen subprograms are described in the report.

  7. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Envelope Research for Factory Built Housing, Phase 3-Design Development and Prototyping Advanced Envelope Research for Factory-Built Housing Building America Expert...

  8. Building America Webinar: Sealing of Home Enclosures with Aerosol...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sealing of Home Enclosures with Aerosol Particles This webinar was presented by research team Building Industry Research Alliance (BIRA), and provided information about a project...

  9. Next Generation Advanced Framing- Building America Top Innovation

    Broader source: Energy.gov [DOE]

    Building America researchers garnered a Top Innovation award for research into simple, cost-effective ways to implement advanced framing techniques.

  10. Innovative Facility Kicks Off First Experiment to Transform Building...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ABOUT FLEXLAB 4,844-square-foot research facility at Lawrence Berkeley National Laboratory for full-scale performance tests on building technologies Enables researchers to conduct ...

  11. "Building the Dye-Sensitized Solar Fuel Device" Conference |...

    Office of Science (SC) Website

    Building the Dye-Sensitized Solar Fuel Device" Conference Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights News & Events EFRC News EFRC ...

  12. New insights gained on mechanisms of low-energy proton-induced SEUs by minimizing energy straggle

    SciTech Connect (OSTI)

    Dodds, Nathaniel Anson; Dodd, Paul E.; Shaneyfelt, Marty R.; Sexton, Frederick W.; Martinez, Marino J.; Black, Jeffrey D.; Marshall, P. W.; Reed, R. A.; McCurdy, M. W.; Weller, R. A.; Pellish, J. A.; Rodbell, K. P.; Gordon, M. S.

    2015-12-01

    In this study, we present low-energy proton single-event upset (SEU) data on a 65 nm SOI SRAM whose substrate has been completely removed. Since the protons only had to penetrate a very thin buried oxide layer, these measurements were affected by far less energy loss, energy straggle, flux attrition, and angular scattering than previous datasets. The minimization of these common sources of experimental interference allows more direct interpretation of the data and deeper insight into SEU mechanisms. The results show a strong angular dependence, demonstrate that energy straggle, flux attrition, and angular scattering affect the measured SEU cross sections, and prove that proton direct ionization is the dominant mechanism for low-energy proton-induced SEUs in these circuits.

  13. Plasma characteristics of single- and dual-electrode ion source systems utilized in low-energy ion extraction

    SciTech Connect (OSTI)

    Vasquez, M. R.; Tokumura, S.; Kasuya, T.; Wada, M.

    2014-02-15

    Discharge characteristics in the upstream as well as in the downstream regions of a 50-eV positive ion beam were measured along the beam axis. Single- and dual-electrode configurations made of 0.1-mm diameter tungsten wires were tested. By varying the upstream discharge parameters, the shape of the sheath edge around the extractors, which can either be planar or cylindrical, can be controlled. The sheath eventually affected the simultaneous extraction of ions and neutralizing electrons. The dual-electrode configuration at the lower discharge current, revealed a homogeneous discharge downstream. At this condition, the edge of the sheath can be inferred to be planar which allowed the uniform extraction and propagation of low-energy ions at longer distances. The dual-electrode configuration was capable of transmitting low-energy ions up to 70 mm downstream.

  14. Three-Nucleon Low-Energy Constants From The Consistency Of Interactions And Currents In Chiral Effective Field Theory

    SciTech Connect (OSTI)

    Gazit, D; Quaglioni, S; Navratil, P

    2008-12-18

    The chiral low-energy constants cD and cE are constrained by means of accurate ab initio calculations of the A = 3 binding energies and, for the first time, of the triton {beta} decay. We demonstrate that these low-energy observables allow a robust determination of the two undetermined constants. The consistency of the interactions and currents in chiral effective field theory is key to this remarkable result. The two- plus three-nucleon interactions from chiral effective field theory defined by properties of the A = 2 system and the present determination of c{sub D} and c{sub E} are successful in predicting properties of the A = 3, and 4 systems.

  15. New insights gained on mechanisms of low-energy proton-induced SEUs by minimizing energy straggle

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Dodds, Nathaniel Anson; Dodd, Paul E.; Shaneyfelt, Marty R.; Sexton, Frederick W.; Martinez, Marino J.; Black, Jeffrey D.; Marshall, P. W.; Reed, R. A.; McCurdy, M. W.; Weller, R. A.; et al

    2015-12-01

    In this study, we present low-energy proton single-event upset (SEU) data on a 65 nm SOI SRAM whose substrate has been completely removed. Since the protons only had to penetrate a very thin buried oxide layer, these measurements were affected by far less energy loss, energy straggle, flux attrition, and angular scattering than previous datasets. The minimization of these common sources of experimental interference allows more direct interpretation of the data and deeper insight into SEU mechanisms. The results show a strong angular dependence, demonstrate that energy straggle, flux attrition, and angular scattering affect the measured SEU cross sections, andmore » prove that proton direct ionization is the dominant mechanism for low-energy proton-induced SEUs in these circuits.« less

  16. Low Cost Thin Film Building-Integrated PV Systems: Cooperative Research and Development Final Report, CRADA Number CRD-07-239

    SciTech Connect (OSTI)

    Stradins, P.

    2011-10-01

    In this CRADA, NREL's Silicon group members performed the following research activities: (1) investigation of the role of hydrogen in growth of a mixed-phase nc-Si:H/a-Si:H material; (2) role of hydrogen in light-induced degradation of a-Si:H and development of Staebler-Wronski effect resistive a-Si:H; and (3) performing characterizations of UniSolar's a-Si:H and nc-Si materials, with goal to help optimizing large-area uniformity and quality of the UniSolar's nanocrystalline Si:H.

  17. Building America

    SciTech Connect (OSTI)

    Brad Oberg

    2010-12-31

    Builders generally use a 'spec and purchase' business management system (BMS) when implementing energy efficiency. A BMS is the overall operational and organizational systems and strategies that a builder uses to set up and run its company. This type of BMS treats building performance as a simple technology swap (e.g. a tank water heater to a tankless water heater) and typically compartmentalizes energy efficiency within one or two groups in the organization (e.g. purchasing and construction). While certain tools, such as details, checklists, and scopes of work, can assist builders in managing the quality of the construction of higher performance homes, they do nothing to address the underlying operational strategies and issues related to change management that builders face when they make high performance homes a core part of their mission. To achieve the systems integration necessary for attaining 40% + levels of energy efficiency, while capturing the cost tradeoffs, builders must use a 'systems approach' BMS, rather than a 'spec and purchase' BMS. The following attributes are inherent in a systems approach BMS; they are also generally seen in quality management systems (QMS), such as the National Housing Quality Certification program: Cultural and corporate alignment, Clear intent for quality and performance, Increased collaboration across internal and external teams, Better communication practices and systems, Disciplined approach to quality control, Measurement and verification of performance, Continuous feedback and improvement, and Whole house integrated design and specification.

  18. Building America Case Study: Evaluation of the Performance of Houses With and Without Supplemental Dehumidification in a Hot-Humid Climate, New Orleans, Louisiana (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-11-01

    This report, Evaluation of the Performance of Houses with and without Supplemental Dehumidification in a Hot-Humid Climate, describes a research study that that was conducted by the Building Science Corporation (BSC) Building America Research Team. BSC seeks to research and report on the field monitoring of the performance of in-situ supplemental dehumidification systems in low energy, high performance, homes in a Hot-Humid climate. The purpose of this research project was to observe and compare the humidity control performance of new, single family, low energy, and high performance, homes. Specifically, the study sought to compare the interior conditions and mechanical systems operation between two distinct groups of houses, homes with a supplemental dehumidifier installed in addition to HVAC system, and homes without any supplemental dehumidification. The subjects of the study were ten single-family new construction homes in New Orleans, LA. Data logging equipment was installed at each home in 2012. Interior conditions and various end-use loads were monitored for one year. In terms of averages, the homes with dehumidifiers are limiting elevated levels of humidity in the living space. However, there was significant variation in humidity control between individual houses. An analysis of the equipment operation did not show a clear correlation between energy use and humidity levels. In general, no single explanatory variable appears to provide a consistent understanding of the humidity control in each house. Indoor humidity is likely due to all of the factors we have examined, and the specifics of how they are used by each occupant.

  19. An electron/ion spectrometer with the ability of low energy electron measurement for fast ignition experiments

    SciTech Connect (OSTI)

    Ozaki, T.; Sakagami, H. [National Institute for Fusion Science, 322-6, Oroshi, Toki, Gifu 509-5292 (Japan); Kojima, S.; Arikawa, Y.; Shiraga, H.; Fujioka, S. [Institute of Laser Engineering, Osaka University, 2-6, Yamada-oka, Suita, Osaka 565-0871 (Japan); Kato, R., E-mail: ozaki@nifs.ac.jp [Institute of Scientific and Industrial Research, Osaka University, 8-1, Mihogaoka, Ibaraki, Osaka 567-0047 (Japan)

    2014-11-15

    An electron energy spectrometer (ESM) is one of the most fundamental diagnostics in the fast ignition experiment. It is necessary to observe the spectra down to a low energy range in order to obtain the accurate deposition efficiency toward the core. Here, we realize the suitable ESM by using a ferrite magnet with a moderate magnetic field of 0.3 T and a rectangular magnetic circuit covered with a steel plate in the inlet side.

  20. Low-Energy Magnetic Field Separation of Hydrocarbons using Nanostructured Adsorbents Presentation for BETO 2015 Project Peer Review

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6, 2015 Biochemical Conversion Philip D. Laible Argonne National Laboratory DOE Bioenergy Technologies Office (BETO) 2015 Project Peer Review 2.5.5.100: Low-Energy Magnetic Field Separation of Hydrocarbons using Nanostructured Adsorbents This presentation does not contain any proprietary, confidential, or otherwise restricted information Project Goals  Improve biochemical conversion process through integration of nanostructured adsorbents as separations agents in fermentation - Allows for