Sample records for longer accepting applications

  1. Energy Department Accepting Small Business Grant Applications...

    Energy Savers [EERE]

    Energy Department Accepting Small Business Grant Applications for Large Wind Turbines Energy Department Accepting Small Business Grant Applications for Large Wind Turbines November...

  2. Energy, Treasury Now Accepting Applications for Funding For Renewable...

    Office of Environmental Management (EM)

    Treasury Now Accepting Applications for Funding For Renewable Energy Projects Energy, Treasury Now Accepting Applications for Funding For Renewable Energy Projects July 31, 2009 -...

  3. High Speed Pumps Are No Longer Limited to Low Flow Applications

    E-Print Network [OSTI]

    Burke, P. Y.

    Historically, the high-speed centrifugal pump was developed prior to World War II for rocket engine fuel pump applications for its advantages of light weight, compactness and dry running capability. Industrial derivatives were introduced in the 60’s...

  4. Energy Department Accepting Applications for a $3.6 Million Hydroelect...

    Energy Savers [EERE]

    Accepting Applications for a 3.6 Million Hydroelectric Production Incentive Program Energy Department Accepting Applications for a 3.6 Million Hydroelectric Production Incentive...

  5. Applicant Accepts Application Instructions Page 1 Sustainable Energy Revolving Loan Fund

    E-Print Network [OSTI]

    Escher, Christine

    _________________ Applicant Accepts Application Instructions Page 1 Sustainable Energy Revolving Loan Fund INFORMATION & INSTRUCTIONS FOR APPLICANTS Introduction The Sustainable Energy Revolving Loan sustainable energy projects at Oregon State University. Projects should provide student learning opportunities

  6. ORISE: Applications being accepted for 2015 spring term of DOE...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    being accepted for 2015 spring term of DOE's Science Undergraduate Laboratory Internship Program at ORNL Students have the opportunity to perform research alongside...

  7. Acceptance and Usability of Physical Mobile Applications Tanja Herting

    E-Print Network [OSTI]

    means for discovering, capturing and using this information. Physical Mobile Interaction (PMI) [10 to trust. In order to make mobile services easier to find and easier to use, the project adopts PMI of typical physical mobile applications (PMA) that use PMI to facilitate the user's interaction

  8. NATIONAL CANCER INSTITUTE The National Cancer Institute is accepting applications for its Fall 2011 HCIP class.

    E-Print Network [OSTI]

    Cinabro, David

    NATIONAL CANCER INSTITUTE The National Cancer Institute is accepting applications for its Fall 2011 by March 1st. Apply online! See website for further details. http://hcip.nci.nih.gov The National Cancer (NIH), is the Federal Government's principal agency for cancer research and training. The NCI

  9. A preliminary examination of variables which influence the public acceptance of potable water reuse applications

    E-Print Network [OSTI]

    Foss, Michele Garteiser

    1997-01-01T23:59:59.000Z

    A PRELIMINARY EXAMINATION OF VARIABLES WHICH INFLUENCE THE PUBLIC ACCEPTANCE OF POTABLE WATER REUSE APPLICATIONS A Thesis MICHELE GARTEISER FOSS Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment... FOSS Submitted to Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Approved as to style and content by: Ronald A. Kaiser (Chair of Committee) rthur L. Sullrvan (Member) William P. Stewart...

  10. No longer available splash screen

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the Contributions andDataNationalNewportBig Eddy Archeological Site Stocktonis no longer

  11. Applications are now being accepted for the Broader Engagement Program at

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAbout theOFFICEAmesApplication Acceleration on CurrentPDSLin toSC14 are

  12. In press on River Research and Applications (paper accepted on 24th February 2010) Armanini et al., in press. Development of a benthic macroinvertebrate flow sensitivity index

    E-Print Network [OSTI]

    Armanini, David G

    1 In press on River Research and Applications (paper accepted on 24th February 2010) Armanini et al., in press. Development of a benthic macroinvertebrate flow sensitivity index for Canadian rivers mainly to changes in hydraulic conditions, and was minimally influenced by confounding factors (e

  13. The UVA Program in Political Philosophy, Policy and Law (PPL) PPL is now accepting applications from students planning to graduate in 2013.

    E-Print Network [OSTI]

    Acton, Scott

    The UVA Program in Political Philosophy, Policy and Law (PPL) PPL is now accepting applications from students planning to graduate in 2013. PPL is a selective interdisciplinary major for students who wish to study law and public policy from a philosophical perspective. PPL majors study such questions

  14. Research Experience in Carbon Sequestration 2015 Now Accepting...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Experience in Carbon Sequestration 2015 Now Accepting Applications Research Experience in Carbon Sequestration 2015 Now Accepting Applications April 13, 2015 - 12:04pm Addthis...

  15. Application for CHE-CCE 2012 Summer Internship Title of project: "Public Acceptance of Congestion Pricing of Transportation"

    E-Print Network [OSTI]

    Keinan, Alon

    Pricing of Transportation" Worksite Location: Ithaca, NY Faculty sponsor: Rick Geddes County Cornell standards for cars and light trucks reduce greenhouse gas emissions and enhance energy independence the acceptance of variable transportation pricing. This includes extant studies that utilize data from telephone

  16. Integrated Design: Because Nothing Lasts Longer Than Bad Design

    E-Print Network [OSTI]

    Westbrook, P.

    2014-01-01T23:59:59.000Z

    Integrated Design: Because Nothing Lasts Longer Than Bad Design Paul Westbrook Sustainable Development Manager, LEED AP Texas Instruments Facilities Senior Fellow, US State Department Energy & Climate Partnership for the Americas (ECPA) ESL-KT-14...

  17. The Department of Industrial and Systems Engineering is accepting applications for open rank non-tenure track faculty positions for academic year 2014-2015. All positions require teaching undergraduate and/or

    E-Print Network [OSTI]

    The Department of Industrial and Systems Engineering is accepting applications for open rank non/or graduate courses related to Industrial and Systems Engineering, and service to the department. A successful of Industrial and Systems Engineering provides competitive compensation packages and benefits. To apply, please

  18. Single molecule imaging with longer x-ray laser pulses

    E-Print Network [OSTI]

    Martin, Andrew V; Caleman, Carl; Quiney, Harry M

    2015-01-01T23:59:59.000Z

    In serial femtosecond crystallography, x-ray laser pulses do not need to outrun all radiation damage processes because Bragg diffraction exceeds the damage-induced background scattering for longer pulses ($\\sim$ 50--100 fs). This is due to a "self-gating pulse" effect whereby damage terminates Bragg diffraction prior to the pulse completing its passage through the sample, as if that diffraction were produced by a shorter pulse of equal fluence. We show here that a similar gating effect applies to single molecule diffraction with respect to spatially uncorrelated damage processes like ionization and ion diffusion. The effect is clearly seen in calculations of the diffraction contrast, by calculating the diffraction of average structure separately to the diffraction from statistical fluctuations of the structure due to damage ("damage noise"). Our results suggest that sub-nanometer single molecule imaging with longer pulses, like those produced at currently operating facilities, should not yet be ruled out. The...

  19. Indoor air movement acceptability and thermal comfort in hot-humid climates

    E-Print Network [OSTI]

    Candido, Christhina Maria

    2010-01-01T23:59:59.000Z

    Bittencourt, L. S. (2010) Air movement acceptability limitsthermal acceptability and air movement assessments in a hot-e úmidos. (Applicability of air velocity limits for thermal

  20. Acceptable NSLS Safety Documentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Acceptable NSLS Safety Documentation Print NSLS users who have completed NSLS Safety Module must present a copy of one of the following documents to receive ALS 1001: Safety at the...

  1. Received 11 January 2002 Accepted 1 March 2002

    E-Print Network [OSTI]

    Pratt, Stephen

    Received 11 January 2002 Accepted 1 March 2002 Published online 29 May 2002 Deciding on a new home, Bristol BS8 1UG, UK 5 Section of Neurobiology and Behavior, Cornell University, Ithaca, NY 14853, USA nectar sources, ants stub- bornly wasting energy on longer routes--can be adaptive in the long term

  2. Guidelines for preparing and reviewing applications for the licensing of non-power reactors: Standard review plan and acceptance criteria. NUREG - 1537, Part 2

    SciTech Connect (OSTI)

    NONE

    1996-02-01T23:59:59.000Z

    NUREG - 1537, Part 2 gives guidance on the conduct of licensing action reviews to NRC staff who review non-power reactor licensing applications. These licensing actions include construction permits and initial operating licenses, license renewals, amendments, conversions from highly enriched uranium to low-enriched uranium, decommissioning, and license termination.

  3. Real-Time Push Middleware and Mobile Application for Electric Vehicle Smart Charging and Aggregation, Accepted for publication June 15, 2011, Special Issue on: Context-

    E-Print Network [OSTI]

    California at Los Angeles, University of

    and Aggregation Siddhartha Mal and Rajit Gadh Smart Grid Energy Research Center, Mechanical Engineering Department-mail: gadh@ucla.edu Abstract: This paper presents a real-time push middleware and mobile application for data Gadh is Professor of Engineering, Director of UCLA-WINMEC and Director of UCLA Smart Grid Energy

  4. Testing, Modeling, and Monitoring to Enable Simpler, Cheaper, Longer-lived Surface Caps

    SciTech Connect (OSTI)

    Piet, S. J.; Breckenridge, R. P.; Burns, D. E.

    2003-02-25T23:59:59.000Z

    Society has and will continue to generate hazardous wastes whose risks must be managed. For exceptionally toxic, long-lived, and feared waste, the solution is deep burial, e.g., deep geological disposal at Yucca Mtn. For some waste, recycle or destruction/treatment is possible. The alternative for other wastes is storage at or near the ground level (in someone's back yard); most of these storage sites include a surface barrier (cap) to prevent downward water migration. Some of the hazards will persist indefinitely. As society and regulators have demanded additional proof that caps are robust against more threats and for longer time periods, the caps have become increasingly complex and expensive. As in other industries, increased complexity will eventually increase the difficulty in estimating performance, in monitoring system/component performance, and in repairing or upgrading barriers as risks are managed. An approach leading to simpler, less expensive, longer-lived, more manageable caps is needed. Our project, which started in April 2002, aims to catalyze a Barrier Improvement Cycle (iterative learning and application) and thus enable Remediation System Performance Management (doing the right maintenance neither too early nor too late). The knowledge gained and the capabilities built will help verify the adequacy of past remedial decisions, improve barrier management, and enable improved solutions for future decisions. We believe it will be possible to develop simpler, longer-lived, less expensive caps that are easier to monitor, manage, and repair. The project is planned to: (a) improve the knowledge of degradation mechanisms in times shorter than service life; (b) improve modeling of barrier degradation dynamics; (c) develop sensor systems to identify early degradation; and (d) provide a better basis for developing and testing of new barrier systems. This project combines selected exploratory studies (benchtop and field scale), coupled effects accelerated aging testing at the intermediate meso-scale, testing of new monitoring concepts, and modeling of dynamic systems. The emphasis on meso-scale (coupled) tests, accelerated effects testing, and dynamic modeling differentiates the project from other efforts, while simultaneously building on that body of knowledge. The performance of evapotranspiration, capillary, and grout-based barriers is being examined. To date, the project can report new approaches to the problem, building new experimental and modeling capabilities, and a few preliminary results.

  5. Testing, Modeling, and Monitoring to Enable Simpler, Cheaper, Longer-Lived Surface Caps

    SciTech Connect (OSTI)

    Piet, Steven James; Breckenridge, Robert Paul; Burns, Douglas Edward

    2003-02-01T23:59:59.000Z

    Society has and will continue to generate hazardous wastes whose risks must be managed. For exceptionally toxic, long-lived, and feared waste, the solution is deep burial, e.g., deep geological disposal at Yucca Mtn. For some waste, recycle or destruction/treatment is possible. The alternative for other wastes is storage at or near the ground level (in someone’s back yard); most of these storage sites include a surface barrier (cap) to prevent downward water migration. Some of the hazards will persist indefinitely. As society and regulators have demanded additional proof that caps are robust against more threats and for longer time periods, the caps have become increasingly complex and expensive. As in other industries, increased complexity will eventually increase the difficulty in estimating performance, in monitoring system/component performance, and in repairing or upgrading barriers as risks are managed. An approach leading to simpler, less expensive, longer-lived, more manageable caps is needed. Our project, which started in April 2002, aims to catalyze a Barrier Improvement Cycle (iterative learning and application) and thus enable Remediation System Performance Management (doing the right maintenance neither too early nor too late). The knowledge gained and the capabilities built will help verify the adequacy of past remedial decisions, improve barrier management, and enable improved solutions for future decisions. We believe it will be possible to develop simpler, longer-lived, less expensive caps that are easier to monitor, manage, and repair. The project is planned to: a) improve the knowledge of degradation mechanisms in times shorter than service life; b) improve modeling of barrier degradation dynamics; c) develop sensor systems to identify early degradation; and d) provide a better basis for developing and testing of new barrier systems. This project combines selected exploratory studies (benchtop and field scale), coupled effects accelerated aging testing at the intermediate meso-scale, testing of new monitoring concepts, and modeling of dynamic systems. The emphasis on meso-scale (coupled) tests, accelerated effects testing, and dynamic modeling differentiates the project from other efforts, while simultaneously building on that body of knowledge. The performance of evapotranspiration, capillary, and grout-based barriers is being examined. To date, the project can report new approaches to the problem, building new experimental and modeling capabilities, and a few preliminary results.

  6. Hanford Site solid waste acceptance criteria

    SciTech Connect (OSTI)

    Ellefson, M.D.

    1998-07-01T23:59:59.000Z

    Order 5820.2A requires that each treatment, storage, and/or disposal facility (referred to in this document as TSD unit) that manages low-level or transuranic waste (including mixed waste and TSCA PCB waste) maintain waste acceptance criteria. These criteria must address the various requirements to operate the TSD unit in compliance with applicable safety and environmental requirements. This document sets forth the baseline criteria for acceptance of radioactive waste at TSD units operated by WMH. The criteria for each TSD unit have been established to ensure that waste accepted can be managed in a manner that is within the operating requirements of the unit, including environmental regulations, DOE Orders, permits, technical safety requirements, waste analysis plans, performance assessments, and other applicable requirements. Acceptance criteria apply to the following TSD units: the Low-Level Burial Grounds (LLBG) including both the nonregulated portions of the LLBG and trenches 31 and 34 of the 218-W-5 Burial Ground for mixed waste disposal; Central Waste Complex (CWC); Waste Receiving and Processing Facility (WRAP); and T Plant Complex. Waste from all generators, both from the Hanford Site and from offsite facilities, must comply with these criteria. Exceptions can be granted as provided in Section 1.6. Specific waste streams could have additional requirements based on the 1901 identified TSD pathway. These requirements are communicated in the Waste Specification Records (WSRds). The Hanford Site manages nonradioactive waste through direct shipments to offsite contractors. The waste acceptance requirements of the offsite TSD facility must be met for these nonradioactive wastes. This document does not address the acceptance requirements of these offsite facilities.

  7. Duke Health Briefs: Positive Outlook Linked to Longer Life in Heart Patients

    E-Print Network [OSTI]

    Hunter, David

    Duke Health Briefs: Positive Outlook Linked to Longer Life in Heart Patients keywords : CardiologyMinute. Here's some health advice to take to heart: if you want to live longer, stay happy. A recent Duke study of more than 800 heart patients found that those who reported experiencing more positive emotions

  8. Development of high performance refractory fibers with enhanced insulating properties and longer service lifetimes

    SciTech Connect (OSTI)

    Martin, P.C.; DePoorter, G.L.; Munoz, D.R.

    1991-02-01T23:59:59.000Z

    We have initiated a three phase investigation of the development of high performance refractory fibers with enhanced insulating properties and longer usable lifetimes. This report presents the results of the first phase of the study, performed from Aug. 1989 through Feb. 1991, which shows that significant energy saving are possible through the use of high temperature insulating fibers that better retain their efficient insulating properties during the service lifetime of the fibers. The remaining phases of this program include the pilot scale development and then full scale production feasibility development and evaluation of enhanced high temperature refractory insulting fibers. This first proof of principle phase of the program presents a summary of the current use patterns of refractory fibers, a laboratory evaluation of the high temperature performance characteristics of selected typical refractory fibers and an analysis of the potential energy savings through the use of enhanced refractory fibers. The current use patterns of refractory fibers span a wide range of industries and high temperature furnaces within those industries. The majority of high temperature fiber applications are in furnaces operating between 2000 and 26000{degrees}F. The fibers used in furnaces operating within this range provide attractive thermal resistance and low thermal storage at reasonable cost. A series of heat treatment studies performed for this phase of the program has shown that the refractory fibers, as initially manufactured, have attractive thermal conductivities for high temperature applications but the fibers go through rapid devitrification and subsequent crystal growth upon high temperature exposure. Development of improved fibers, maintaining the favorable characteristics of the existing as-manufactured fibers, could save between 1 and 4% of the energy consumed in high temperature furnaces using refractory fibers.

  9. Now Accepting Applications: BUILD Funding Opportunity | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    November 14, 2014 5:00PM EST to December 19, 2014 5:00PM EST Through its annual Buildings University Innovators and Leaders Development (BUILD) funding opportunity, the Energy...

  10. Now Accepting Applications for Alvarez Fellowship!

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Berkeley National Laboratory's Computing Sciences Directorate. Researchers in computer science, applied mathematics or any computational science discipline who have received...

  11. Energy Department Accepting Small Business Grant Applications...

    Office of Environmental Management (EM)

    of the undeveloped hydropower resource potential in the United States may require turbine-generator units operating at "heads," the height at which the water falls, less than...

  12. Venture Acceleration Fund now accepting 2012 applications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500IIVasudha Patri MechanicalofVehicles - ORNLVentilation

  13. Now Accepting Applications for Alvarez Fellowship!

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory | NationalJohnSecurity ComplexNormanNovember 1,8 NovemberNow

  14. Cone penetrometer acceptance test report

    SciTech Connect (OSTI)

    Boechler, G.N.

    1996-09-19T23:59:59.000Z

    This Acceptance Test Report (ATR) documents the results of acceptance test procedure WHC-SD-WM-ATR-151. Included in this report is a summary of the tests, the results and issues, the signature and sign- off ATP pages, and a summarized table of the specification vs. ATP section that satisfied the specification.

  15. Acceptance Criteria Framework for Autonomous Biological Detectors

    SciTech Connect (OSTI)

    Dzenitis, J M

    2006-12-12T23:59:59.000Z

    The purpose of this study was to examine a set of user acceptance criteria for autonomous biological detection systems for application in high-traffic, public facilities. The test case for the acceptance criteria was the Autonomous Pathogen Detection System (APDS) operating in high-traffic facilities in New York City (NYC). However, the acceptance criteria were designed to be generally applicable to other biological detection systems in other locations. For such detection systems, ''users'' will include local authorities (e.g., facility operators, public health officials, and law enforcement personnel) and national authorities [including personnel from the Department of Homeland Security (DHS), the BioWatch Program, the Centers for Disease Control and Prevention (CDC), and the Federal Bureau of Investigation (FBI)]. The panel members brought expertise from a broad range of backgrounds to complete this picture. The goals of this document are: (1) To serve as informal guidance for users in considering the benefits and costs of these systems. (2) To serve as informal guidance for developers in understanding the needs of users. In follow-up work, this framework will be used to systematically document the APDS for appropriateness and readiness for use in NYC.

  16. Acceptable Documents for Identity Proofing

    Broader source: Energy.gov [DOE]

    It is a requirement that the identity of a DOE Digital Identity Subscriber be verified against acceptable identity source documents. A Subscriber must appear in person and present their Federal...

  17. Living Longer on Less THe neW economic (in)securiTy of seniors

    E-Print Network [OSTI]

    Snider, Barry B.

    Living Longer on Less THe neW economic (in)securiTy of seniors INSTITUTE ON ASSETS & SOCIAL POLICY to measuring economic security applied in this report builds on previous work on middle class economic security for Social Policy and Manage- ment at Brandeis University, is dedicated to the economic well-being and social

  18. SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM : Acceptance Checklist...

    Broader source: Energy.gov (indexed) [DOE]

    PROGRAM : Acceptance Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM : Acceptance Checklist The following checklist is intended to provide system owners, project managers,...

  19. Survey of methods for improving operator acceptance of computerized aids

    SciTech Connect (OSTI)

    Frey, P. R.; Kisner, R. A.

    1982-04-01T23:59:59.000Z

    The success of current attempts to improve the operational performance and safety of nuclear power plants by installing computerized operational aids in the control rooms is dependent, in part, on the operator's attitude toward the aid. Utility experience with process computer systems indicates that problems may already exist with operator acceptance of computerized aids. The growth of the role that computers have in nuclear power plants makes user acceptance of computer technology an important issue for the nuclear industry. The purpose of this report is to draw from the literature factors related to user acceptance of computerized equipment that may also be applicable to the acceptance of computerized aids used in the nuclear power plant control room.

  20. Florida Current transport variability: An analysis of annual and longer-period signals

    E-Print Network [OSTI]

    n f o Article history: Received 23 June 2009 Received in revised form 9 December 2009 Accepted 7 scale variability given the strong higher frequency energy present. The annual cycle represents less variability. Comparison of the Florida Current, NAO and wind stress curl records shows that a recently

  1. Accepting the T3D

    SciTech Connect (OSTI)

    Rich, D.O.; Pope, S.C.; DeLapp, J.G.

    1994-10-01T23:59:59.000Z

    In April, a 128 PE Cray T3D was installed at Los Alamos National Laboratory`s Advanced Computing Laboratory as part of the DOE`s High-Performance Parallel Processor Program (H4P). In conjunction with CRI, the authors implemented a 30 day acceptance test. The test was constructed in part to help them understand the strengths and weaknesses of the T3D. In this paper, they briefly describe the H4P and its goals. They discuss the design and implementation of the T3D acceptance test and detail issues that arose during the test. They conclude with a set of system requirements that must be addressed as the T3D system evolves.

  2. Modification of the GS LT Paired-end Library Protocol for Constructing Longer Insert Size Libraries

    SciTech Connect (OSTI)

    Peng, Ze; Peng, Ze; Hamilton, Matthew; Ting, Sara; Tu, Hank; Goltsman, Eugene; Lapidus, Alla; Lucas, Susan; Cheng, Jan-Fang

    2008-05-22T23:59:59.000Z

    Paired-end library sequencing has been proven useful in scaffold construction during de novo assembly of genomic sequences. The ability of generating mate pairs with 8 Kb or greater insert sizes is especially important for genomes containing long repeats. While the current 454 GS LT Paired-end library preparation protocol can successfully construct libraries with 3 Kb insert size, it fails to generate longer insert sizes because the protocol is optimized to purify shorter fragments. We have made several changes in the protocol in order to increase the fragment length. These changes include the use of Promega column to increase the yield of large size DNA fragments, two gel purification steps to remove contaminated short fragments, and a large reaction volume in the circularization step to decrease the formation of chimeras. We have also made additional changes in the protocol to increase the overall quality of the libraries. The quality of the libraries are measured by a set of metrics, which include levels of redundant reads, linker positive, linker negative, half linker reads, and driver DNA contamination, and read length distribution, were used to measure the primary quality of these libraries. We have also assessed the quality of the resulted mate pairs including levels of chimera, distribution of insert sizes, and genome coverage after the assemblies are completed. Our data indicated that all these changes have improved the quality of the longer insert size libraries.

  3. Blind and Deaf to Acceptance: The Role of Self-Esteem in Capitalizing on Social Acceptance

    E-Print Network [OSTI]

    Luerssen, Anna Maud

    2013-01-01T23:59:59.000Z

    Blind and Deaf to Acceptance: The Role of Self-Esteem inGlaser Spring 2013 Abstract Blind and Deaf to Acceptance:never have been possible. Blind and Deaf to Acceptance: The

  4. Secretary Richardson Accepts Recommendations for Improving Security...

    National Nuclear Security Administration (NNSA)

    Secretary Richardson Accepts Recommendations for Improving Security at Nuclear Weapons Laboratories | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS...

  5. ALTERNATE ACCEPTANCE OF WULFENSTEIN PIT AGGREGATE

    SciTech Connect (OSTI)

    J. W. Keifer

    1999-06-24T23:59:59.000Z

    The purpose of this calculation is to evaluate Wulfenstein fine aggregate for acceptability under ASTM C 33 standard specification.

  6. Acceptance sampling using judgmental and randomly selected samples

    SciTech Connect (OSTI)

    Sego, Landon H.; Shulman, Stanley A.; Anderson, Kevin K.; Wilson, John E.; Pulsipher, Brent A.; Sieber, W. Karl

    2010-09-01T23:59:59.000Z

    We present a Bayesian model for acceptance sampling where the population consists of two groups, each with different levels of risk of containing unacceptable items. Expert opinion, or judgment, may be required to distinguish between the high and low-risk groups. Hence, high-risk items are likely to be identifed (and sampled) using expert judgment, while the remaining low-risk items are sampled randomly. We focus on the situation where all observed samples must be acceptable. Consequently, the objective of the statistical inference is to quantify the probability that a large percentage of the unsampled items in the population are also acceptable. We demonstrate that traditional (frequentist) acceptance sampling and simpler Bayesian formulations of the problem are essentially special cases of the proposed model. We explore the properties of the model in detail, and discuss the conditions necessary to ensure that required samples sizes are non-decreasing function of the population size. The method is applicable to a variety of acceptance sampling problems, and, in particular, to environmental sampling where the objective is to demonstrate the safety of reoccupying a remediated facility that has been contaminated with a lethal agent.

  7. Strain-Based Acceptance Criteria for Energy-Limited Events

    SciTech Connect (OSTI)

    Spencer D. Snow; Dana K. Morton

    2009-07-01T23:59:59.000Z

    The American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel (B&PV) Code was primarily written with stress-based acceptance criteria. These criteria are applicable to force, displacement, and energy-controlled loadings and ensure a factor of safety against failure. However, stress-based acceptance criteria are often quite conservative for one time energy-limited events such as accidental drops and impacts. For several years, the ASME Working Group on Design of Division 3 Containments has been developing the Design Articles for Section III, Division 3, “Containments for Transportation and Storage of Spent Nuclear Fuel and High-Level Radioactive Material and Waste,” and has wanted to establish strain-based acceptance criteria for accidental drops of containments. This Division 3 working group asked the Working Group on Design Methodology (WGDM) to assist in developing these strain-based acceptance criteria. This paper discusses the current proposed strain-based acceptance criteria, associated limitations of use, its background development, and the current status.

  8. Brain necrosis after fractionated radiation therapy: Is the halftime for repair longer than we thought?

    SciTech Connect (OSTI)

    Bender, Edward T. [Department of Human Oncology, University of Wisconsin-Madison, School of Medicine and Public Health, 600 Highland Avenue, Madison, Wisconsin 53792 (United States)

    2012-11-15T23:59:59.000Z

    Purpose: To derive a radiobiological model that enables the estimation of brain necrosis and spinal cord myelopathy rates for a variety of fractionation schemes, and to compare repair effects between brain and spinal cord. Methods: Sigmoidal dose response relationships for brain radiation necrosis and spinal cord myelopathy are derived from clinical data using nonlinear regression. Three different repair models are considered and the repair halftimes are included as regression parameters. Results: For radiation necrosis, a repair halftime of 38.1 (range 6.9-76) h is found with monoexponential repair, while for spinal cord myelopathy, a repair halftime of 4.1 (range 0-8) h is found. The best-fit alpha beta ratio is 0.96 (range 0.24-1.73)Conclusions: A radiobiological model that includes repair corrections can describe the clinical data for a variety of fraction sizes, fractionation schedules, and total doses. Modeling suggests a relatively long repair halftime for brain necrosis. This study suggests that the repair halftime for late radiation effects in the brain may be longer than is currently thought. If confirmed in future studies, this may lead to a re-evaluation of radiation fractionation schedules for some CNS diseases, particularly for those diseases where fractionated stereotactic radiation therapy is used.

  9. Elastic energy storage in b-sheets with application to F1-ATPase Received: 26 December 2002 / Revised: 11 March 2003 / Accepted: 4 April 2003 / Published online: 3 September 2003

    E-Print Network [OSTI]

    Sun, Sean

    ARTICLE Elastic energy storage in b-sheets with application to F1-ATPase Received: 26 December 2002) of elastic energy is stored in the b-sheet as the b-subunit undergoes its hinge bending motion, in good to deduce the relative free energies of each equilibrated structure. This allows us to determine the free

  10. Color No Longer A Sign of Bondage: Race, Identity and the First Kansas Colored Volunteer Infantry Regiment (1862-1865)

    E-Print Network [OSTI]

    Ringquist, John Paul

    2011-08-31T23:59:59.000Z

    "Color No Longer A Sign of Bondage" is an account of the First Kansas Colored Volunteer Infantry Regiment from its earliest days in 1862 to the regiment's triumphant return to Kansas in November 1865. This work encompasses ...

  11. SAPHIRE 8 Software Acceptance Test Plan

    SciTech Connect (OSTI)

    Ted S. Wood; Curtis L. Smith

    2009-07-01T23:59:59.000Z

    This document describe & report the overall SAPHIRE 8 Software acceptance test paln to offically release the SAPHIRE version 8 software to the NRC custoer for distribution.

  12. FBI officer accepts LANL counterintelligence post

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LANL counterintelligence FBI officer accepts LANL counterintelligence post Cloyd has most recently served as assistant director of the Counterintelligence Division of the Federal...

  13. International Emissions Trading: Design and Political Acceptability.

    E-Print Network [OSTI]

    Boom, Jan Tjeerd

    2006-01-01T23:59:59.000Z

    ??This thesis discusses the design and political acceptability of international emissions trading. It is shown that there are several designs options for emissions trading at… (more)

  14. Nevada Test Site Waste Acceptance Criteria (NTSWAC)

    SciTech Connect (OSTI)

    NNSA /NSO Waste Management Project

    2008-06-01T23:59:59.000Z

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, Nevada Test Site Waste Acceptance Criteria (NTSWAC). The NTSWAC provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive (LLW) and LLW Mixed Waste (MW) for disposal.

  15. ENHANCING STAKEHOLDER ACCEPTANCE OF BIOREMEDIATION TECHNOLOGIES

    SciTech Connect (OSTI)

    Focht, Will; Albright, Matt; Anex, Robert P., Jr., ed.

    2009-04-21T23:59:59.000Z

    This project inquired into the judgments and beliefs of people living near DOE reservations and facilities at Oak Ridge, Tennessee; Hanford, Washington; and Los Alamos, Tennessee about bioremediation of subsurface contamination. The purpose of the investigation was to identify strategies based on these judgments and beliefs for enhancing public support of bioremediation. Several methods were used to collect and analyze data including content analysis of transcripts of face-to-face personal interviews, factor analysis of subjective perspectives using Q methodology, and statistical analysis of results from a large-sample randomized telephone survey. Content analysis of interview transcripts identified themes about public perceptions and constructions of contamination risk, risk management, and risk managers. This analysis revealed that those who have no employment relationship at the sites and are not engaged in technical professions are most concerned about contamination risks. We also found that most interviewees are unfamiliar with subsurface contamination risks and how they can be reduced, believe they have little control over exposure, are frustrated with the lack of progress in remediation, are concerned about a lack of commitment of DOE to full remediation, and distrust site managers to act in the public interest. Concern is also expressed over frequent site management turnover, excessive secrecy, ineffective and biased communication, perceived attempts to talk the public into accepting risk, and apparent lack of concern about community welfare. In the telephone survey, we asked respondents who were aware of site contamination about their perceptions of risk from exposure to subsurface contamination. Response analysis revealed that most people believe that they are at significant risk from subsurface contamination but they acknowledge that more education is needed to calibrate risk perceptions against scientific risk assessments. Most rate their personal control over exposure as low. Slightly more than half believe that risk reduction should be balanced against cost. We also found that distrust of DOE and its contractors exists, primarily due to the perception that site managers do not share public values; hence, the public is generally unwilling to defer to DOE in its decision-making. The concomitant belief of inefficacy confounds distrust by generating frustration that DOE does not care. Moreover, the public is split with respect to trust of each other, primarily because of the belief that citizens lack technical competence. With respect to bioremediation support, we found that more than 40% of the public has no opinion. However, of those who do, 3 of 4 are favorably disposed – particularly among those who believe that risk is lower and who are more trusting of site management. We presented survey respondents with four alternative participation strategies based on the results of the Q analysis and asked their judgments of each. The public prefers strategies that shifts power to them. The least empowered strategy (feedback) was supported by 46%; support grew as public power increased, reaching 66% support for independently facilitated deliberation. More DOE distrust generates more support for high power strategies. We offer the following recommendations to enhance public acceptance. First, and perhaps most importantly, site managers should pursue robust trust-building efforts to gain public confidence in DOE risk management that meets public expectations. Public trust decreases risk perception, which increases public willingness to defer to site managers’ discretion in decision-making, which in turn increases public acceptance of the decisions that result. Second, site managers should address public concerns about bioremediation such as its effectiveness in reducing risk, performance compared to other remediation alternatives, costs compared against benefits, time required to start and complete remediation, level of risk that is currently posed by contamination, and scope of application. Third, more should be d

  16. Improving performance and rotordynamic characteristics of injection compressors via much longer balance-piston and division-wall seals

    E-Print Network [OSTI]

    Rodrigues Rodrigues, Margarita

    2009-05-15T23:59:59.000Z

    Predictions are presented for a selected compressor using longer hole-pattern seals with L/D ratios from 0.5 to 2.5. Results were obtained for back-to-back and in-line compressors with the seal located at mid-span and at 82% of rotor span...

  17. Hanford Site Solid Waste Acceptance Criteria

    SciTech Connect (OSTI)

    Not Available

    1993-11-17T23:59:59.000Z

    This manual defines the Hanford Site radioactive, hazardous, and sanitary solid waste acceptance criteria. Criteria in the manual represent a guide for meeting state and federal regulations; DOE Orders; Hanford Site requirements; and other rules, regulations, guidelines, and standards as they apply to acceptance of radioactive and hazardous solid waste at the Hanford Site. It is not the intent of this manual to be all inclusive of the regulations; rather, it is intended that the manual provide the waste generator with only the requirements that waste must meet in order to be accepted at Hanford Site TSD facilities.

  18. NEVADA TEST SITE WASTE ACCEPTANCE CRITERIA

    SciTech Connect (OSTI)

    U.S. DEPARTMENT OF ENERGY, NATIONAL NUCLEAR SECURITY ADMINISTRATION, NEVADA SITE OFFICE

    2005-07-01T23:59:59.000Z

    This document establishes the U. S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) waste acceptance criteria (WAC). The WAC provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive and mixed waste for disposal. Mixed waste generated within the State of Nevada by NNSA/NSO activities is accepted for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the Nevada Test Site Area 3 and Area 5 Radioactive Waste Management Site for storage or disposal.

  19. Market Acceptance of Advanced Automotive Technologies Model ...

    Open Energy Info (EERE)

    Automotive Technologies Model (MA3T) Consumer Choice Model AgencyCompany Organization: Oak Ridge National Laboratory OpenEI Keyword(s): EERE tool, Market Acceptance of Advanced...

  20. Applications Now Being Accepted for National Geothermal Academy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    University of Utah, Southern Methodist University, University of Massachusetts Dartmouth, West Virginia University and others. Individual modules will also be offered for...

  1. Indian Energy Summer Internship Program Now Accepting Applications...

    Broader source: Energy.gov (indexed) [DOE]

    on tribal off-grid photovoltaic systems and renewable energy systems during her 2002 internship. Photo courtesy from Sandra Begay-Campbell, Sandia National Laboratories. Deborah...

  2. Indian Energy Summer Internship Program Now Accepting Applications:

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomentheATLANTA,Fermi NationalBusiness PlanPosting of|of DepartmentAprilOctober,

  3. Research Experience in Carbon Sequestration 2010 Now Accepting Applications

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015Department ofRequirements Crosswalk| Department of

  4. Research Experience in Carbon Sequestration 2013 Now Accepting Applications

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015Department ofRequirements Crosswalk| Department of|

  5. Energy Department Accepting Small Business Grant Applications for Large

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.Program -Department of Energy benchmarking.DepartmentDepartmentandWind

  6. Energy, Treasury Now Accepting Applications for Funding For Renewable

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.Program -Department oftoTheseClick on the graphic to learnEnergy Projects |

  7. Research Experience in Carbon Sequestration 2015 Now Accepting Applications

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomen OwnedofDepartmentEnergyFrequency | DepartmentDepartmentDigital| Department of

  8. Hydrogen Student Design Contest - Now accepting applications! | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensional Subject:GroundtoProduction TechnicalSensorof Energy Hydrogen

  9. Applications Being Accepted for National Geothermal Academy | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTie Ltd: Scope Change #1 |MarketingVI, LLCPowerFederalPower

  10. Applications Now Being Accepted for National Geothermal Academy |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTie Ltd: Scope Change #1 |MarketingVI, LLCPowerFederalPowerDepartment of

  11. Public Acceptability of Sustainable Transport Measures: A Review...

    Open Energy Info (EERE)

    Public Acceptability of Sustainable Transport Measures: A Review of the Literature Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Public Acceptability of Sustainable...

  12. EAC Recommendations for DOE Action Regarding Consumer Acceptance...

    Energy Savers [EERE]

    Consumer Acceptance of Smart Grid - June 6, 2013 EAC Recommendations for DOE Action Regarding Consumer Acceptance of Smart Grid - June 6, 2013 EAC Recommendations for DOE Action...

  13. An economic approach to acceptance sampling

    E-Print Network [OSTI]

    Ruth, Robert Justin

    1973-01-01T23:59:59.000Z

    AN ECONOMIC APPROACH TO ACCEPTANCE SAMPLING A Thesis by ROBERT JUSTIN RUTH Subm1tted to the Graduate College of Texas AkM University in Partial fulfillment of the requirement for the degree of MASTER OP SCIENCE May 1973 Ma)or Sub... JUSTIN RUTH I Approved as to style and content by& , J ~ W P. H. Newell Head Departmen J McNicho e Mem er 8w~ D. R. Shreve Member May 1973 ABSTRACT An Economic Approach to Acceptance Sampling (&m 1973) Robert Justin Ruth, S. S ~ , Virgin1a...

  14. Nevada Test Site Waste Acceptance Criteria

    SciTech Connect (OSTI)

    U. S. Department of Energy, National Nuclear Security Administration Nevada Site Office

    2005-10-01T23:59:59.000Z

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) waste acceptance criteria (WAC). The WAC provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive (LLW) and mixed waste (MW) for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NTS Area 3 and Area 5 Radioactive Waste Management Complex (RWMC) for storage or disposal.

  15. Use the Acceptable Crop Price worksheet to determine breakeven prices for your crops. ACCEPTABLE PRICE WORKSHEET

    E-Print Network [OSTI]

    Netoff, Theoden

    Use the Acceptable Crop Price worksheet to determine breakeven prices for your crops. ACCEPTABLE PRICE WORKSHEET Prepared by: David Bau - Regional Extension Educator, Agricultural Business Management (August 2012) CROP INCOME EXAMPLE YOUR FARM EXAMPLE YOUR FARM (A) Crop Acres 400 400 176 46 (C) Price

  16. Nevada National Security Site Waste Acceptance Criteria

    SciTech Connect (OSTI)

    NSTec Environmental Management

    2012-02-28T23:59:59.000Z

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept DOE non-radioactive classified waste, DOE non-radioactive hazardous classified waste, DOE low-level radioactive waste (LLW), DOE mixed low-level waste (MLLW), and U.S. Department of Defense (DOD) classified waste for permanent disposal. Classified waste is the only waste accepted for disposal that may be non-radioactive and will be required to meet the waste acceptance criteria for radioactive waste as specified in this document. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project (WMP) at (702) 295-7063, and your call will be directed to the appropriate contact.

  17. Optimizing Organ Allocation and Acceptance OGUZHAN ALAGOZ

    E-Print Network [OSTI]

    Schaefer, Andrew

    it is transplanted is called the cold ischemia time (CIT). During this time, organs are bathed in storage solutions J. SCHAEFER Departments of Industrial Engineering and Medicine University of Pittsburgh Pittsburgh of Transplant Recipients states that the acceptable cold ischemia time limit for a liver is 12 to 18 hours [22

  18. Nevada National Security Site Waste Acceptance Criteria

    SciTech Connect (OSTI)

    none,

    2013-06-01T23:59:59.000Z

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept the following: ? DOE hazardous and non-hazardous non-radioactive classified waste ? DOE low-level radioactive waste (LLW) ? DOE mixed low-level waste (MLLW) ? U.S. Department of Defense (DOD) classified waste The LLW and MLLW listed above may also be classified waste. Classified waste is the only waste accepted for disposal that may be non-radioactive and shall be required to meet the waste acceptance criteria for radioactive waste as specified in this document. Classified waste may be sent to the NNSS as classified matter. Section 3.1.18 provides the requirements that must be met for permanent burial of classified matter. The NNSA/NFO and support contractors are available to assist the generator in understanding or interpreting this document. For assistance, please call the NNSA/NFO Environmental Management Operations (EMO) at (702) 295-7063, and the call will be directed to the appropriate contact.

  19. Buffer Tank Design for Acceptable Control Performance

    E-Print Network [OSTI]

    Skogestad, Sigurd

    Buffer Tank Design for Acceptable Control Performance Audun Faanes and Sigurd Skogestad for the design of buffer tanks. We consider mainly the case where the objective of the buffer tank is to dampen- trol system. We consider separately design procedures for (I) mixing tanks to dampen quality

  20. STATE OF CALIFORNIA AUTOMATIC DAYLIGHTING CONTROL ACCEPTANCE DOCUMENT

    E-Print Network [OSTI]

    STATE OF CALIFORNIA AUTOMATIC DAYLIGHTING CONTROL ACCEPTANCE DOCUMENT CEC-LTG-3A (Revised 07/10) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF ACCEPTANCE LTG-3A Automatic Daylighting Control Acceptance fraction of rated light output. #12;STATE OF CALIFORNIA AUTOMATIC DAYLIGHTING CONTROL ACCEPTANCE DOCUMENT

  1. Acceptance test procedure for the overview video camera system (OVS)

    SciTech Connect (OSTI)

    Pardini, A.F.

    1995-10-01T23:59:59.000Z

    Acceptance Test Procedure for testing the Light Duty Utility Arm (LDUA) Overview Video Camera System (OVS).

  2. Nevada National Security Site Waste Acceptance Criteria

    SciTech Connect (OSTI)

    NSTec Environmental Management

    2011-01-01T23:59:59.000Z

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NNSSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NNSS Area 3 and Area 5 Radioactive Waste Management Complex for disposal. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project at (702) 295-7063 or fax to (702) 295-1153.

  3. Accepted Manuscript A wall heat transfer correlation for the baffled-rotary kilns with secondary air

    E-Print Network [OSTI]

    Boyer, Edmond

    Accepted Manuscript A wall heat transfer correlation for the baffled-rotary kilns with secondary;1 A wall heat transfer correlation for the baffled- rotary kilns with secondary air flow and recycled industrial applications suggests examining the heat transfer phenomena in order to improve the multi

  4. Wind Energy Community Acceptance | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:SeadovCooperative JumpWilliamson County,Bay, OR) Jump to:Information WAsP)Acceptance

  5. Restrictions on Federal Employees Acceptance of Gifts

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAXBalancedDepartmentRestrictions on Federal Employees Acceptance of Gifts As the

  6. Order Acceptance and Scheduling Problem in Two-machine Flow ...

    E-Print Network [OSTI]

    Rasul Esmaeilbeigi

    2014-07-29T23:59:59.000Z

    Jul 29, 2014 ... Order Acceptance and Scheduling Problem in Two-machine Flow Shops: New Mixed Integer Programming Formulations.

  7. City of Detroit- SmartBuildings Detroit Grant Program

    Broader source: Energy.gov [DOE]

    '''''Note: This program is no longer accepting applications. Check the program web site for information regarding future solicitations.'''''...

  8. City of Detroit- SmartBuildings Detroit Green Fund Loan

    Broader source: Energy.gov [DOE]

    '''''Note: This program is no longer accepting applications. Check the program web site for information regarding future solicitations.'''''...

  9. Renewable Energy Grant Programs

    Broader source: Energy.gov [DOE]

    '''''Note: This program is no longer accepting applications. See the program web site for information regarding future solicitations. '''''

  10. ForPeerReview PUBLIC ACCEPTANCE OF OFFSHORE WIND POWER

    E-Print Network [OSTI]

    Firestone, Jeremy

    ForPeerReview PUBLIC ACCEPTANCE OF OFFSHORE WIND POWER PROJECTS IN THE UNITED STATES Journal: Wind, Andrew; Minerals Management Service Keywords: offshore wind power, public opinion, social acceptancePeerReview 1 PUBLIC ACCEPTANCE OF OFFSHORE WIND POWER PROJECTS IN THE UNITED STATES Jeremy Firestone*, Willett

  11. Social Acceptance of Wind: A Brief Overview (Presentation)

    SciTech Connect (OSTI)

    Lantz, E.

    2015-01-01T23:59:59.000Z

    This presentation discusses concepts and trends in social acceptance of wind energy, profiles recent research findings, and discussions mitigation strategies intended to resolve wind power social acceptance challenges as informed by published research and the experiences of individuals participating in the International Energy Agencies Working Group on Social Acceptance of Wind Energy

  12. STATE OF CALIFORNIA DISTRIBUTED ENERGY STORAGE DX AC SYSTEMES ACCEPTANCE

    E-Print Network [OSTI]

    STATE OF CALIFORNIA DISTRIBUTED ENERGY STORAGE DX AC SYSTEMES ACCEPTANCE CEC-MECH-14A (Revised 08/09) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF ACCEPTANCE MECH-14A NA7.5.13 Distributed Energy Storage DX AC DISTRIBUTED ENERGY STORAGE DX AC SYSTEMES ACCEPTANCE CEC-MECH-14A (Revised 08/09) CALIFORNIA ENERGY COMMISSION

  13. STATE OF CALIFORNIA THERMAL ENERGY STORAGE (TES) SYSTEM ACCEPTANCE

    E-Print Network [OSTI]

    STATE OF CALIFORNIA THERMAL ENERGY STORAGE (TES) SYSTEM ACCEPTANCE CEC-MECH-15A (Revised 07/10) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF ACCEPTANCE MECH-15A NA7.5.14 Thermal Energy Storage (TES) System THERMAL ENERGY STORAGE (TES) SYSTEM ACCEPTANCE CEC-MECH-15A (Revised 07/10) CALIFORNIA ENERGY COMMISSION

  14. Waste acceptance criteria for the Waste Isolation Pilot Plant

    SciTech Connect (OSTI)

    NONE

    1996-04-01T23:59:59.000Z

    The Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria (WAC), DOE/WIPP-069, was initially developed by a U.S. Department of Energy (DOE) Steering Committee to provide performance requirements to ensure public health and safety as well as the safe handling of transuranic (TRU) waste at the WIPP. This revision updates the criteria and requirements of previous revisions and deletes those which were applicable only to the test phase. The criteria and requirements in this document must be met by participating DOE TRU Waste Generator/Storage Sites (Sites) prior to shipping contact-handled (CH) and remote-handled (RH) TRU waste forms to the WIPP. The WIPP Project will comply with applicable federal and state regulations and requirements, including those in Titles 10, 40, and 49 of the Code of Federal Regulations (CFR). The WAC, DOE/WIPP-069, serves as the primary directive for assuring the safe handling, transportation, and disposal of TRU wastes in the WIPP and for the certification of these wastes. The WAC identifies strict requirements that must be met by participating Sites before these TRU wastes may be shipped for disposal in the WIPP facility. These criteria and requirements will be reviewed and revised as appropriate, based on new technical or regulatory requirements. The WAC is a controlled document. Revised/changed pages will be supplied to all holders of controlled copies.

  15. Grazing function g and collimation angular acceptance

    E-Print Network [OSTI]

    Peggs, Stephen G

    2009-01-01T23:59:59.000Z

    The grazing function g is introduced—a synchrobetatron optical quantity that is analogous (and closely connected) to the Twiss and dispersion functions ?, ?, ?, and ??. It parametrizes the rate of change of total angle with respect to synchrotron amplitude for grazing particles, which just touch the surface of an aperture when their synchrotron and betatron oscillations are simultaneously (in time) at their extreme displacements. The grazing function can be important at collimators with limited acceptance angles. For example, it is important in both modes of crystal collimation operation—in channeling and in volume reflection. The grazing function is independent of the collimator type—crystal or amorphous—but can depend strongly on its azimuthal location. The rigorous synchrobetatron condition g=0 is solved, by invoking the close connection between the grazing function and the slope of the normalized dispersion. Propagation of the grazing function is described, through drifts, dipoles, and quadr...

  16. Documentation of acceptable knowledge for Los Alamos National Laboratory Plutonium Facility TRU waste stream

    SciTech Connect (OSTI)

    Montoya, A.J.; Gruetzmacher, K.M.; Foxx, C.L.; Rogers, P.Z.

    1998-03-01T23:59:59.000Z

    Characterization of transuranic waste from the LANL Plutonium Facility for certification and transportation to WIPP includes the use of acceptable knowledge as specified in the WIPP Quality Assurance Program Plan. In accordance with a site specific procedure, documentation of acceptable knowledge for retrievably stored and currently generated transuranic waste streams is in progress at LANL. A summary overview of the TRU waste inventory is complete and documented in the Sampling Plan. This document also includes projected waste generation, facility missions, waste generation processes, flow diagrams, times, and material inputs. The second part of acceptable knowledge documentation consists of assembling more detailed acceptable knowledge information into auditable records and is expected to require several years to complete. These records for each waste stream must support final assignment of waste matrix parameters, EPA hazardous waste numbers, and radionuclide characterization. They must also include a determination whether waste streams are defense waste streams for compliance with the WIPP Land Withdrawal Act. The LANL Plutonium Facility`s mission is primarily plutonium processing in basic special nuclear material (SNM) research activities to support national defense and energy programs. It currently has about 100 processes ranging from SNM recovery from residues to development of plutonium 238 heat sources for space applications. Its challenge is to characterize and certify waste streams from such diverse and dynamic operations using acceptable knowledge. This paper reports the progress on the certification of the first of these waste streams to the WIPP WAC.

  17. Documentation of acceptable knowledge for LANL Plutonium Facility transuranic waste streams

    SciTech Connect (OSTI)

    Montoya, A.J.; Gruetzmacher, K.; Foxx, C.; Rogers, P.S.Z.

    1998-07-01T23:59:59.000Z

    Characterization of transuranic waste from the LANL Plutonium Facility for certification and transportation to WIPP includes the use of acceptable knowledge as specified in the WIPP Quality Assurance Program Plan. In accordance with a site-specific procedure, documentation of acceptable knowledge for retrievably stored and currently generated transuranic waste streams is in progress at LANL. A summary overview of the transuranic waste inventory is complete and documented in the Sampling Plan. This document also includes projected waste generation, facility missions, waste generation processes, flow diagrams, times, and material inputs. The second part of acceptable knowledge documentation consists of assembling more detailed acceptable knowledge information into auditable records and is expected to require several years to complete. These records for each waste stream must support final assignment of waste matrix parameters, EPA hazardous waste numbers, and radionuclide characterization. They must also include a determination whether waste streams are defense waste streams for compliance with the WIPP Land Withdrawal Act. The LANL Plutonium Facility`s mission is primarily plutonium processing in basic special nuclear material (SNM) research activities to support national defense and energy programs. It currently has about 100 processes ranging from SNM recovery from residues to development of plutonium 238 heat sources for space applications. Its challenge is to characterize and certify waste streams from such diverse and dynamic operations using acceptable knowledge. This paper reports the progress on the certification of the first of these waste streams to the WIPP WAC.

  18. Electric top drives gain wide industry acceptance

    SciTech Connect (OSTI)

    Riahi, M.L.

    1998-05-01T23:59:59.000Z

    Since its introduction, the top drive drilling system has gained acceptance as a productive and safe method for drilling oil and gas wells. Originally, the system was used mostly for offshore and higher cost land drilling, and it had to be installed as a permanent installation because of its enormous weight and size. Essentially, a top drive replaces the kelly and rotary table as the means of rotating drillpipe on oil, gas and geothermal rigs and is considered to be 15% to 40% more efficient than a kelly drive. Top drive systems allow the operator to drill and maintain directional orientation for triple stands and provide tripping efficiency because of the ability to ream and circulate with triple stands, to reduce the risk of stuck pipe or lost wells, and to improve well control and pipe handling safety. The paper describes electric top drives with DC motors, top drives with AC motors, top drives with permanent magnet motors, and top drives with permanent magnet brushless synchronous motors.

  19. Acceptance test report for the mobile color camera system

    SciTech Connect (OSTI)

    Castleberry, J.L., Fluor Daniel Hanford

    1997-02-27T23:59:59.000Z

    The purpose of this report is to present test data recorded during acceptance testing of the Mobile Color Camera System (MCCS).

  20. Cold test data for equipment acceptance into 105-KE Basin

    SciTech Connect (OSTI)

    Packer, M.J.

    1994-11-09T23:59:59.000Z

    This document provides acceptance testing of equipment to be installed in the 105-KE Basin for pumping sludge to support the discharge chute barrier doors installation.

  1. Acceptance inspection plan 105KW Facility modifications for fuel retrieval subproject

    SciTech Connect (OSTI)

    Shen, E.J.

    1998-01-09T23:59:59.000Z

    The acceptance inspection of construction by Fluor Daniel Hanford (FDH) is performed to provide assurance that fabrication, construction, and installation are in accordance with approved contract documents. Approved contract documents used to perform inspections may include specifications, drawings, and contractor submittals such as fabrication drawings, procedures, etc. The amount or degree of inspection activity is tailored to the project as determined by the project team so that the effort and cost expended are commensurate with the importance of the facility in terms of function and safety. Inspections are documented to provide verification of the acceptability of the work performed. This document identifies the inspections and documentation forms to be provided. It is prepared and implemented with the understanding that the construction contractor is fully responsible for compliance with contract documents and for the quality of.work performed. Inspections performed are in accordance with approved procedures. The Manager of Acceptance Inspection is responsible for the implementation of this plan and assignment of personnel for the work. Inspections are conducted by personnel who are qualified and certified to perform their assigned task. The Acceptance Inspection Plan is organized in the Construction Specification Institute (CSI) format to cross reference design specification sections with sections of the AI Plan. In each AI Plan section the applicable specification section subject will be identified followed by the appropriate inspection requirements. General surveillances will be listed when applicable. Acceptance Inspection Reports are provided to document inspections not documented on a test report (i.e., Soil Test Data, Concrete Test Report, NDE/Weld Record, Leak/Pressure Test Certification, Backflow Device Test Report, Nonconformance Report, Deficiency Report, and/or Contractors testing forms).

  2. Acceptance inspection plan 105KE Facility modifications for fuel retrieval subproject

    SciTech Connect (OSTI)

    Shen, E.J.

    1998-01-09T23:59:59.000Z

    The acceptance inspection of construction by Fluor Daniel Hanford (FDH) is performed to provide assurance that fabrication, construction, and installation are in accordance with approved contract documents. Approved contract documents used to perform inspections may include specifications, drawings, and contractor submittals such as fabrication drawings, procedures, etc. The amount or degree of inspection activity is tailored to the project as determined by the project team so that the effort and cost expended are commensurate with the importance of the facility in terms of function and safety. Inspections are documented to provide verification of the acceptability of the work performed. This document identifies the inspections and documentation forms to be provided. It is prepared and implemented with the understanding that the construction contractor is fully responsible for compliance with contract documents and for the quality of work performed. Inspections performed are in accordance with approved procedures. The Manager of Acceptance Inspection is responsible for the implementation of this plan and assignment of personnel for the work. Inspections are conducted by personnel who are qualified and certified, to perform their assigned task. The Acceptance Inspection Plan is organized in the Construction Specification Institute (CSI) format to cross reference design specification sections with sections of the AI Plan. In each AI Plan section the applicable specification section subject will be identified followed by the appropriate inspection requirements. General surveillances will be listed when applicable. Acceptance Inspection Reports are provided to document inspections not documented on a test report (i.e., Soil Test Data, Concrete Test Report, NDE/Weld Record, Leak/Pressure Test Certification, Backflow Device Test Report, Nonconformance Report, Deficiency Report, and/or Contractors testing forms).

  3. PV modules, with a life measured in decades, will typically be in place longer than the outdoor unit of a HVAC system.

    E-Print Network [OSTI]

    Johnson, Eric E.

    unit of a HVAC system. When the performance of an HVAC system deteriorates, it is usually inspected remain installed on the roof even after the system is no longer being used. Although HVAC units have only jumpers and screws effectively bond all parts of the listed device together. HVAC components are typically

  4. Vehicle engine use when no longer in transit; exceptions -Vehicle idling gets zero miles per gallon; unnecessary idling wastes fuel and pollutes.

    E-Print Network [OSTI]

    Powers, Robert

    Vehicle engine use when no longer in transit; exceptions - Vehicle idling gets zero miles per, no University vehicle or piece of equipment is to be idled in a non-emergency situation. The operator of the vehicle/equipment is to turn-off the unit and the keys are to be removed from the ignition. EXEMPTIONS

  5. STATE OF CALIFORNIA SUPPLY WATER TEMPERATURE RESET CONTROLS ACCEPTANCE

    E-Print Network [OSTI]

    STATE OF CALIFORNIA SUPPLY WATER TEMPERATURE RESET CONTROLS ACCEPTANCE CEC-MECH-9A (Revised 08/09) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF ACCEPTANCE MECH-9A NA7.5.8 Supply Water Temperature Reset, under the laws of the State of California, the information provided on this form is true and correct

  6. acceptance test plan: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    acceptance test plan First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 G4Beamline Acceptance Tests Chris...

  7. Accepted Manuscript Title: Metal Current Collector-Free Freestanding

    E-Print Network [OSTI]

    Cui, Yi

    Accepted Manuscript Title: Metal Current Collector-Free Freestanding Silicon-Carbon 1D, Metal Current Collector-Free Freestanding Silicon-Carbon 1D Nanocomposites for Ultralight Anodes that apply to the journal pertain. #12;Page 1 of 20 Accepted M anuscript 1 Metal Current Collector

  8. Acceptance test procedure for High Pressure Water Jet System

    SciTech Connect (OSTI)

    Crystal, J.B.

    1995-05-30T23:59:59.000Z

    The overall objective of the acceptance test is to demonstrate a combined system. This includes associated tools and equipment necessary to perform cleaning in the 105 K East Basin (KE) for achieving optimum reduction in the level of contamination/dose rate on canisters prior to removal from the KE Basin and subsequent packaging for disposal. Acceptance tests shall include necessary hardware to achieve acceptance of the cleaning phase of canisters. This acceptance test procedure will define the acceptance testing criteria of the high pressure water jet cleaning fixture. The focus of this procedure will be to provide guidelines and instructions to control, evaluate and document the acceptance testing for cleaning effectiveness and method(s) of removing the contaminated surface layer from the canister presently identified in KE Basin. Additionally, the desired result of the acceptance test will be to deliver to K Basins a thoroughly tested and proven system for underwater decontamination and dose reduction. This report discusses the acceptance test procedure for the High Pressure Water Jet.

  9. accepting foregin research: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Swinburne University of Technology Research Funding Acceptance Form Physics Websites Summary: )...

  10. Radioisotope Thermoelectric Generator F7 Flight Unit Acceptance Buy Off

    SciTech Connect (OSTI)

    none,

    1997-02-20T23:59:59.000Z

    These are viewgraphs from the subject presentation. The LMMS E-7 history is outlined; Qualification and use of the F-7 GPHS-RTG for the Cassini mission; and the F-7 acceptance test program and performance are described.

  11. Must a Bayesian Accept the Likelihood Principle? Daniel Steel

    E-Print Network [OSTI]

    Fitelson, Branden

    Must a Bayesian Accept the Likelihood Principle? Daniel Steel Department of Philosophy 503 S. Kedzie Hall Michigan State University East Lansing, MI 48824-1032 Email: steel@msu.edu #12;1 1

  12. Accepted to the Journal Geophysical Research Laboratory measurements of electrical

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 Accepted to the Journal Geophysical Research Laboratory measurements of electrical conductivities measurements of electrical conductivities of natural magma compositions. The electrical conductivities of three. The electrical conductivity increases with temperature and is higher in the order tephrite, phonotephrite

  13. Social Acceptance of Wind: A Brief Overview (Presentation), NREL...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Social Acceptance of Wind: A Brief Overview AWEA State Wind Energy Forum Eric Lantz January 20, 2015 Lansing, Michigan NRELPR-6A20-63590 2 Presentation Overview 1. Concepts -...

  14. Idaho CERCLA Disposal Facility Complex Waste Acceptance Criteria

    SciTech Connect (OSTI)

    W. Mahlon Heileson

    2006-10-01T23:59:59.000Z

    The Idaho Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Disposal Facility (ICDF) has been designed to accept CERCLA waste generated within the Idaho National Laboratory. Hazardous, mixed, low-level, and Toxic Substance Control Act waste will be accepted for disposal at the ICDF. The purpose of this document is to provide criteria for the quantities of radioactive and/or hazardous constituents allowable in waste streams designated for disposal at ICDF. This ICDF Complex Waste Acceptance Criteria is divided into four section: (1) ICDF Complex; (2) Landfill; (3) Evaporation Pond: and (4) Staging, Storage, Sizing, and Treatment Facility (SSSTF). The ICDF Complex section contains the compliance details, which are the same for all areas of the ICDF. Corresponding sections contain details specific to the landfill, evaporation pond, and the SSSTF. This document specifies chemical and radiological constituent acceptance criteria for waste that will be disposed of at ICDF. Compliance with the requirements of this document ensures protection of human health and the environment, including the Snake River Plain Aquifer. Waste placed in the ICDF landfill and evaporation pond must not cause groundwater in the Snake River Plain Aquifer to exceed maximum contaminant levels, a hazard index of 1, or 10-4 cumulative risk levels. The defined waste acceptance criteria concentrations are compared to the design inventory concentrations. The purpose of this comparison is to show that there is an acceptable uncertainty margin based on the actual constituent concentrations anticipated for disposal at the ICDF. Implementation of this Waste Acceptance Criteria document will ensure compliance with the Final Report of Decision for the Idaho Nuclear Technology and Engineering Center, Operable Unit 3-13. For waste to be received, it must meet the waste acceptance criteria for the specific disposal/treatment unit (on-Site or off-Site) for which it is destined.

  15. Acceptance test report for core sample trucks 3 and 4

    SciTech Connect (OSTI)

    Corbett, J.E.

    1996-04-10T23:59:59.000Z

    The purpose of this Acceptance Test Report is to provide documentation for the acceptance testing of the rotary mode core sample trucks 3 and 4, designated as HO-68K-4600 and HO-68K-4647, respectively. This report conforms to the guidelines established in WHC-IP-1026, ``Engineering Practice Guidelines,`` Appendix M, ``Acceptance Test Procedures and Reports.`` Rotary mode core sample trucks 3 and 4 were based upon the design of the second core sample truck (HO-68K-4345) which was constructed to implement rotary mode sampling of the waste tanks at Hanford. Successful completion of acceptance testing on June 30, 1995 verified that all design requirements were met. This report is divided into four sections, beginning with general information. Acceptance testing was performed on trucks 3 and 4 during the months of March through June, 1995. All testing was performed at the ``Rock Slinger`` test site in the 200 West area. The sequence of testing was determined by equipment availability, and the initial revision of the Acceptance Test Procedure (ATP) was used for both trucks. Testing was directed by ICF-KH, with the support of WHC Characterization Equipment Engineering and Characterization Project Operations. Testing was completed per the ATP without discrepancies or deviations, except as noted.

  16. The Nuclear Energy Option for the U.S.--How Far Are We from Public Acceptance?

    SciTech Connect (OSTI)

    Biedscheid, J.A.; Devarakonda, M.

    2004-10-03T23:59:59.000Z

    The recent rise of oil and gasoline prices accompanied by reluctant acknowledgement that traditional sources of energy are limited has renewed public interest in renewable energy sources. This perspective on energy is focusing attention on and facilitating acceptance of alternative energy concepts, such as solar, wind, and biomass. The nuclear energy alternative, while clean with potentially abundant fuel supplies and associated with low costs, is burdened with the frequently negative public opinion reserved for things nuclear. Coincident with the heightened examination of alternative energy concepts, 2004 marks the 25-year anniversary of the Three Mile Island accident. Since this pivotal accident in 1979, no new reactor licenses have been granted in the U.S. The resolution of the issues of nuclear waste management and disposition are central to and may advance public discussions of the future use of nuclear energy. The U.S. Department of Energy (DOE) is currently preparing the licensing application for Yucca Mountain, which was designated in 2003 as the site for a high-level waste and spent nuclear fuel repository in the U.S. The DOE also has been operating a deep geologic repository for the permanent disposal of transuranic (TRU) waste since 1999. The operational status of the Waste Isolation Pilot Plant (WIPP) as a repository for TRU waste was successfully realized along with the lesson learned that stakeholder trust and acceptance are as critical to the success of a repository program as the resolution of technical issues and obtaining regulatory approvals. For the five years of its operation and for decades prior, the challenge of attaining public acceptance of the WIPP has persisted for reasons aligned with the opposition to nuclear energy. Due to this commonality, the nuclear waste approach to public acceptance, with its pros and cons, provides a baseline for the examination of an approach for the public acceptance of nuclear energy in the U.S. This paper will present these concepts and discuss the future of nuclear energy in the U.S. in light of the challenge of gaining public acceptance.

  17. Product acceptance environmental and destructive testing for reliability.

    SciTech Connect (OSTI)

    Dvorack, Michael A.; Kerschen, Thomas J.; Collins, Elmer W.

    2007-08-01T23:59:59.000Z

    To determine whether a component is meeting its reliability requirement during production, acceptance sampling is employed in which selected units coming off the production line are subjected to additional environmental and/or destructive tests that are within the normal environment space to which the component is expected to be exposed throughout its life in the Stockpile. This report describes what these tests are and how they are scored for reliability purposes. The roles of screens, Engineering Use Only tests, and next assembly product acceptance testing are also discussed, along with both the advantages and disadvantages of environmental and destructive testing.

  18. NEVADA TEST SITE WASTE ACCEPTANCE CRITERIA, JUNE 2006

    SciTech Connect (OSTI)

    U.S. DEPARTMENT OF ENERGY, NATIONAL NUCLEAR SECURITY ADMINISTRATION NEVADA SITE OFFICE

    2006-06-01T23:59:59.000Z

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) waste acceptance criteria (WAC). The WAC provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive (LLW) and mixed waste (MW) for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NTS Area 3 and Area 5 Radioactive Waste Management Complex (RWMC) for storage or disposal.

  19. Methods for verifying compliance with low-level radioactive waste acceptance criteria

    SciTech Connect (OSTI)

    NONE

    1993-09-01T23:59:59.000Z

    This report summarizes the methods that are currently employed and those that can be used to verify compliance with low-level radioactive waste (LLW) disposal facility waste acceptance criteria (WAC). This report presents the applicable regulations representing the Federal, State, and site-specific criteria for accepting LLW. Typical LLW generators are summarized, along with descriptions of their waste streams and final waste forms. General procedures and methods used by the LLW generators to verify compliance with the disposal facility WAC are presented. The report was written to provide an understanding of how a regulator could verify compliance with a LLW disposal facility`s WAC. A comprehensive study of the methodology used to verify waste generator compliance with the disposal facility WAC is presented in this report. The study involved compiling the relevant regulations to define the WAC, reviewing regulatory agency inspection programs, and summarizing waste verification technology and equipment. The results of the study indicate that waste generators conduct verification programs that include packaging, classification, characterization, and stabilization elements. The current LLW disposal facilities perform waste verification steps on incoming shipments. A model inspection and verification program, which includes an emphasis on the generator`s waste application documentation of their waste verification program, is recommended. The disposal facility verification procedures primarily involve the use of portable radiological survey instrumentation. The actual verification of generator compliance to the LLW disposal facility WAC is performed through a combination of incoming shipment checks and generator site audits.

  20. Laser Applications in Metal Surface Hardening

    E-Print Network [OSTI]

    Eckersley, J. S.

    1982-01-01T23:59:59.000Z

    The acceptance of C02 lasers in industry to provide surface hardening is an established fact. Applications number in the hundreds in such diverse fields as automotive, office machines, air compressors, jet engines, military, paper converting...

  1. Accepted Manuscript Variational formulations for surface tension, capillarity and wetting

    E-Print Network [OSTI]

    Frey, Pascal

    Accepted Manuscript Variational formulations for surface tension, capillarity and wetting Gustavo C formulations for surface tension, capillarity and wetting, Comput. Methods Appl. Mech. Engrg. (2011), doi: 10 formulations for surface tension, capillarity and wetting Gustavo C. Buscagliaa,b, , Roberto F. Ausasa,b a

  2. Accepted Manuscript Title: Microstructure of ethylcellulose oleogels and its

    E-Print Network [OSTI]

    Dutcher, John

    manuscript that has been accepted for publication. As a service to our customers we are providing this early from our food supply requires innovative approaches to the problem since oil by itself does not have(EC) is the only polymer olegelator that is food grade, commercially available in good purity and allowed in food

  3. acceptance test summary: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    acceptance test summary First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 LMS Qualification and Flight...

  4. Determination of the Acceptable Room Temperature Range for Local Cooling

    E-Print Network [OSTI]

    Zhang, Y.; Zhao, R.

    2006-01-01T23:59:59.000Z

    Determination of the acceptable room temperature range is a key problem in satisfactory design of local cooling for energy savings. At the room temperatures ranging from neutral to warm, three sensitive body parts-the face, chest and back-were each...

  5. www.elsevier.com/locate/csda Author's Accepted Manuscript

    E-Print Network [OSTI]

    Kundu, Debasis

    Bayesestimatorsforreliabilitymeasuresingeometric distribution model using masked system life test data Ammar M. Sarhan, Debasis Kundu PII: S0167 distribution model using masked system life test data, Computa- tional Statistics & Data Analysis (2007), doi;Accepted m anuscript Bayes estimators for reliability measures in geometric distribution model using masked

  6. Accepted Manuscript Sustainable manufacturing: Evaluation and Modeling of

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    in additive manufacturing Florent Le Bourhisa · Olivier Kerbrata Jean-Yves Hascoeta · Pascal Mognola Accepted of manufacturing processes where great amounts of energy and materials are being consumed. Nowadays, additive manufacturing technologies such as Direct Additive Laser Manufac- turing allow us to manufacture functional

  7. Accepted Manuscript Title: The Identification of Causal Effects in Environmental

    E-Print Network [OSTI]

    Kotchen, Matthew J.

    . Environmental and energy economists are making greater use of randomized laboratory and field experiments, have engagement, it has maintained a steady course in focusing on environmental and energy policy issuesAccepted Manuscript Title: The Identification of Causal Effects in Environmental and Energy

  8. Received 25 March 2002 Accepted 6 August 2002

    E-Print Network [OSTI]

    Received 25 March 2002 Accepted 6 August 2002 Published online 9 December 2002 Nuclear markers reveal unexpected genetic variation and a Congolese­Nilotic origin of the Lake Victoria cichlid species flock Ole Seehausen1,2* , Egbert Koetsier2 , Maria Victoria Schneider2 , Lauren J. Chapman3,4 , Colin A

  9. Continuous cleanup of oilfield waste in an environmentally acceptable manner

    SciTech Connect (OSTI)

    Wally, R.F.; Dowdy, S.A.

    1983-05-01T23:59:59.000Z

    After several years of research and field testing, a process has been developed which can economically treat reserve pit waste. This continuous process converts the reserve pit contents into two environmentally acceptable products: a relatively dry, non-leachable cake-like solid material, and water which is purified for recycle or release directly into the environment.

  10. Received 9 June 2004 Accepted 25 June 2004

    E-Print Network [OSTI]

    Davies, Jonathan

    dependent on solar energy input. Previous work demonstrated a sig- nificant correlation between the generalReceived 9 June 2004 Accepted 25 June 2004 Published online 24 September 2004 Environmental energy Biology, Imperial College London, Silwood Park Campus, Ascot SL5 7PY, UK 2 Molecular Systematics Section

  11. Accepted for publication in Geopolitics The eco-frontier paradigm

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Accepted for publication in Geopolitics The eco-frontier paradigm: rethinking the links between of Limoges, France Sylvain.guyot@unilim.fr Key-words Eco-politics, eco-frontiers, space, nature, territory2010 #12;Table 1: Three generations of eco-frontiers (source: Author) Generations Average start- ing

  12. accepted for publication at IS'2000 University of Wollongong, Australia

    E-Print Network [OSTI]

    Zimmer, Uwe

    , drifting, or even stochastically moving target is a necessary condition for successful applications

  13. The role of acceptable knowledge in transuranic waste disposal operations - 11117

    SciTech Connect (OSTI)

    Chancellor, Christopher John [Los Alamos National Laboratory; Nelson, Roger [DOE-CARLSBAD

    2010-11-08T23:59:59.000Z

    The Acceptable Knowledge (AK) process plays a key role in the delineation of waste streams destined for the Waste Isolation Pilot Plant (WIPP). General Electric's Vallecitos Nuclear Center (GEVNC) provides for an ideal case study of the application of AK in a multiple steward environment. In this review we will elucidate the pivotal role Acceptable Knowledge played in segregating Department of Energy (DOE) responsibilities from a commercial facility. The Acceptable Knowledge process is a necessary component of waste characterization that determines whether or not a waste stream may be considered for disposal at the WIPP site. This process may be thought of as an effort to gain a thorough understanding of the waste origin, chemical content, and physical form gleaned by the collection of documentation that concerns generator/storage site history, mission, and operations; in addition to waste stream specific information which includes the waste generation process, the waste matrix, the quantity of waste concerned, and the radiological and chemical make up of the waste. The collection and dissemination of relevant documentation is the fundamental requirement for the AK process to work. Acceptable Knowledge is the predominant process of characterization and, therefore, a crucial part of WIPP's transuranic waste characterization program. This characterization process, when conducted to the standards set forth in WIPP's operating permit, requires confirmation/verification by physical techniques such as Non-Destructive Examination (NDE), Visual Examination (VE), and Non-Destructive Assay (NDA). These physical characterization techniques may vary in their appropriateness for a given waste stream; however, nothing will allow the substitution or exclusion of AK. Beyond the normal scope of operations, AK may be considered, when appropriate, a surrogate for the physical characterization techniques in a procedure that appeals to concepts such As Low As Reasonably Achievable (ALARA) and budgetary savings. This substitution is referred to as an Acceptable Knowledge Sufficiency Determination. With a Sufficiency Determination Request, AK may supplant the need for one or all of the physical analysis methods. This powerful procedure may be used on a scale as small as a single container to that of a vast waste stream. Only under the most stringent requirements will an AK Sufficiency Determination be approved by the regulators and, to date, only six such Sufficiency Determinations have been approved. Although Acceptable Knowledge is legislated into the operational procedures of the WIPP facility there is more to it than compliance. AK is not merely one of a long list of requirements in the characterization and verification of transuranic (TRU) waste destined for the WIPP. Acceptable Knowledge goes beyond the regulatory threshold by offering a way to reduce risk, cost, time, and uncertainty on its own laurels. Therefore, AK alone can be argued superior to any other waste characterization technique.

  14. W-026, transuranic waste (TRU) glovebox acceptance test report

    SciTech Connect (OSTI)

    Leist, K.J.

    1998-03-11T23:59:59.000Z

    On July 18, 1997, the Transuranic (TRU) glovebox was tested using glovebox acceptance test procedure 13021A-86. The primary focus of the glovebox acceptance test was to examine control system interlocks, display menus, alarms, and operator messages. Limited mechanical testing involving the drum ports, hoists, drum lifter, compacted drum lifter, drum tipper, transfer car, conveyors, sorting table, lidder/delidder device and the TRU empty drum compactor were also conducted. As of February 25, 1998, 10 of the 102 test exceptions that affect the TRU glovebox remain open. These items will be tracked and closed via the WRAP Master Test Exception Database. As part of Test Exception resolution/closure the responsible individual closing the Test Exception performs a retest of the affected item(s) to ensure the identified deficiency is corrected, and, or to test items not previously available to support testing. Test exceptions are provided as appendices to this report.

  15. WRAP low level waste (LLW) glovebox acceptance test report

    SciTech Connect (OSTI)

    Leist, K.J.

    1998-02-17T23:59:59.000Z

    In June 28, 1997, the Low Level Waste (LLW) glovebox was tested using glovebox acceptance test procedure 13031A-85. The primary focus of the glovebox acceptance test was to examine control system interlocks, display menus, alarms, and operator messages. Limited mechanical testing involving the drum ports, hoists, drum lifter, compacted drum lifter, drum tipper, transfer car, conveyors, lidder/delidder device and the supercompactor were also conducted. As of November 24, 1997, 2 of the 131 test exceptions that affect the LLW glovebox remain open. These items will be tracked and closed via the WRAP Master Test Exception Database. As part of Test Exception resolution/closure the responsible individual closing the Test Exception performs a retest of the affected item(s) to ensure the identified deficiency is corrected, and, or to test items not previously available to support testing. Test Exceptions are provided as appendices to this report.

  16. 105 K East isolation barrier acceptance analysis report

    SciTech Connect (OSTI)

    McCracken, K.J. [ICF Kaiser Hanford Co., Richland, WA (United States); Irwin, J.J. [Westinghouse Hanford Co., Richland, WA (United States)

    1995-05-31T23:59:59.000Z

    The objective of this document is to report and interpret the findings of the isolation barrier acceptance tests performed in 105KE/100K. The tests were performed in accordance with the test plan (McCracken 1995c) and acceptance test procedure (McCracken 1995a). The test report (McCracken 1995b) contains the test data. This document compares the test data (McCracken 1995b) against the criteria (McCracken 1995a, c). A discussion of the leak rate analytical characterization (Irwin 1995) describes how the flow characteristics and the flow rate will be determined using the test data from the test report (McCracken 1995b). The barriers must adequately control the leakage from the main basin to the discharge chute to less than the 1,500 gph (5,680 lph) Safety Analysis Report (SAR 1994) limit.

  17. Acceptance Test Plan for the Sludge Pickup Adaptor

    SciTech Connect (OSTI)

    PITNER, A.L.

    2000-03-29T23:59:59.000Z

    This test plan documents the acceptance testing of the sludge pickup adapter for potential use during PSI Phases 3 and 4 fuel cleanliness inspection activities. The adaptex is attached to the strainer tip of the vacuum wand and used to suction up residual sludge captured in a sludge collection tray. The material is vacuumed into a chamber of known volume in the sludge pickup adapter. The device serves as an aid in helping to determine whether the observed quantity of sludge is within allowable limits (1.4 cm{sup 3} per fuel assembly). This functionality test involves underwater testing in the 305 Building Cold Test Facility to verify that sludge can be successfully vacuumed from a collection tray. Ancillary activities in this acceptance test include demonstration that the sludge pickup adapter CM be successfully attached to and detached from the vacuum wand underwater.

  18. Accepted Manuscript A rounding algorithm for approximating minimum Manhattan

    E-Print Network [OSTI]

    Chepoi, Victor

    , Karim Nouioua, Yann Vax`es PII: S0304-3975(07)00765-7 DOI: 10.1016/j.tcs.2007.10.013 Reference: TCS 6686 Accepted date: 6 October 2007 Please cite this article as: V. Chepoi, K. Nouioua, Y. Vax`es, A rounding, Yann Vax`es Laboratoire d'Informatique Fondamentale de Marseille, Universit´e de la M

  19. Polarization Measurements in Photoproduction with CEBAF Large Acceptance Spectrometer

    SciTech Connect (OSTI)

    E. Pasyuk

    2010-05-01T23:59:59.000Z

    A significant part of the experimental program in Hall-B of the Jefferson Lab is dedicated to the studies of the structure of baryons. CEBAF Large Acceptance Spectrometer (CLAS), availability of circularly and linearly polarized photon beams and recent addition of polarized targets provides remarkable opportunity for single, double and in some cases triple polarization measurements in photoproduction. An overview of the experiments will be presented.

  20. 105K West Isolation Barrier Acceptance Test results

    SciTech Connect (OSTI)

    McCracken, K.J. [ICF Kaiser Hanford Co., Richland, WA (United States); Irwin, J.J. [Westinghouse Hanford Co., Richland, WA (United States)

    1995-05-18T23:59:59.000Z

    The objective of this document is to report and interpret the findings of the isolation barrier acceptance tests performed in 105KW/100K. The tests were performed in accordance with the test plan and acceptance test procedure. The test report contains the test data. This document compares the test data against the criteria. A discussion of the leak rate analytical characterization describes how the flow characteristics flow rate will be determined using the test data from the test report. Two modes of water loss were considered; basin and/or discharge chute leakage, and evaporation. An initial test established baseline leakage data and instrumentation performance. Test 2 evaluated the sealing performance of the isolation barrier by inducing an 11 in. (27.9 cm) level differential across the barrier. The leak rate at this 11 in. (27.9 cm) level is extrapolated to the 16 ft. (4.9 m) level differential postulated in the DBE post seismic event. If the leak rate, adjusted for evaporation and basin leakage (determined from Test 1), is less than the SAR limit of 1,500 gph (5,680 lph) at a 16 ft (4.9 m) level differential, the barriers pass the acceptance test.

  1. History of Uranium-233(sup233U)Processing at the Rocky Flats Plant. In support of the RFETS Acceptable Knowledge Program

    SciTech Connect (OSTI)

    Moment, R.L.; Gibbs, F.E.; Freiboth, C.J.

    1999-04-01T23:59:59.000Z

    This report documents the processing of Uranium-233 at the Rocky Flats Plant (Rocky Flats Environmental Technology Site). The information may be used to meet Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria (WAC)and for determining potential Uranium-233 content in applicable residue waste streams.

  2. hal-00168179,version1-24Aug2007 W2001-255 REGULAR PAPER ACCEPTED TO IEEE TRANSACTIONS ON ROBOTICS AND AUTOMATION 1 Architecture Optimization of

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    . The design optimization is conducted on the basis of a prescribed Cartesian workspace with prescribedhal-00168179,version1-24Aug2007 W2001-255 REGULAR PAPER ACCEPTED TO IEEE TRANSACTIONS ON ROBOTICS the architecture optimization of a 3-DOF translational parallel mechanism designed for ma- chining applications

  3. Technical basis for acceptance criteria on the susceptibility of digital systems to electromagnetic interference

    SciTech Connect (OSTI)

    Ewing, P.D.; Korsah, K. [Oak Ridge National Lab., TN (US); Antonescu, C. [Nuclear Regulatory Commission, Rockville, MD (US). Office of Nuclear Regulatory Research

    1992-12-31T23:59:59.000Z

    This paper discusses the development of the technical basis for establishing acceptance criteria on the susceptibility of digital systems to electromagnetic interference (EMI). The effort is sponsored by the US Nuclear Regulatory Commission and stems from the safety-related issues that need to be addressed with the application of digital instrumentation and controls systems in nuclear power plants. Designers of digital circuits are incorporating increasingly higher clock frequencies and lower logic voltage levels, thereby leading to the risk of susceptibility when spurious interference is misinterpreted as legitimate logic. Development of the technical basis for acceptance criteria centers around establishing good engineering practices to ensure that sufficient levels of electromagnetic compatibility (EMC) are maintained between the nuclear power plant`s electronic and electromechanical systems. First, good EMC design and installation practices are needed to control the emissions from interference sources and their impact on other nearby circuits and systems. Then, a test and evaluation program is needed to outline the EMI tests to be performed, the associated test methods to be followed, and adequate test limits to ensure that the circuit or system under test meets the recommended guidelines. Test and evaluation should be followed by periodic maintenance to assess whether the recommended EMI control practices continue to be adhered to as part of the routine operation of the nuclear power plant. By following these steps, the probability of encountering safety-related problems associated with EMI will be greatly reduced.

  4. Participatory approach, acceptability and transparency of waste management LCAs: Case studies of Torino and Cuneo

    SciTech Connect (OSTI)

    Blengini, Gian Andrea, E-mail: blengini@polito.it [DIATI - Department of Environment, Land and Infrastructures Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Turin (Italy); CNR-IGAG - Institute of Environmental Geology and Geo-Engineering, Corso Duca degli Abruzzi 24, 10129 Turin (Italy); Fantoni, Moris, E-mail: moris.fantoni@polito.it [DIATI - Department of Environment, Land and Infrastructures Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Turin (Italy); Busto, Mirko, E-mail: mirko.busto@jrc.ec.europa.eu [European Commission - Joint Research Centre, Via Enrico Fermi 2749, I-21027 Ispra (Italy); Genon, Giuseppe, E-mail: giuseppe.genon@polito.it [DIATI - Department of Environment, Land and Infrastructures Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Turin (Italy); Zanetti, Maria Chiara, E-mail: mariachiara.zanetti@polito.it [DIATI - Department of Environment, Land and Infrastructures Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Turin (Italy)

    2012-09-15T23:59:59.000Z

    Highlights: Black-Right-Pointing-Pointer Life Cycle Assessment is still not fully operational in waste management at local scale. Black-Right-Pointing-Pointer Credibility of WM LCAs is negatively affected by assumptions and lack of transparency. Black-Right-Pointing-Pointer Local technical-social-economic constraints are often not reflected by WM LCAs. Black-Right-Pointing-Pointer A participatory approach can increase acceptability and credibility of WM LCAs. Black-Right-Pointing-Pointer Results of a WM LCA can hardly ever be generalised, thus transparency is essential. - Abstract: The paper summarises the main results obtained from two extensive applications of Life Cycle Assessment (LCA) to the integrated municipal solid waste management systems of Torino and Cuneo Districts in northern Italy. Scenarios with substantial differences in terms of amount of waste, percentage of separate collection and options for the disposal of residual waste are used to discuss the credibility and acceptability of the LCA results, which are adversely affected by the large influence of methodological assumptions and the local socio-economic constraints. The use of site-specific data on full scale waste treatment facilities and the adoption of a participatory approach for the definition of the most sensible LCA assumptions are used to assist local public administrators and stakeholders showing them that LCA can be operational to waste management at local scale.

  5. Automatic scanning of nuclear emulsions with wide-angle acceptance for nuclear fragment detection

    E-Print Network [OSTI]

    Fukuda, T; Ishida, H; Kodama, K; Matsuo, T; Mikado, S; Ogawa, S; Shibuya, H; Sudo, J

    2013-01-01T23:59:59.000Z

    Nuclear emulsion, a tracking detector with sub-micron position resolution, has played a successful role in the field of particle physics and the analysis speed has been substantially improved by the development of automated scanning systems. This paper describes a newly developed automated scanning system and its application to the analysis of nuclear fragments emitted almost isotropically in nuclear evaporation. This system is able to recognize tracks of nuclear fragments up to |tan{\\theta}|nuclear emulsion is the first trial. Furthermore the track recognition algorithm is performed by a powerful Graphics Processing Unit (GPU) for the first time. This GPU has a sufficient computing power to process large area scanning data with a wide angular acceptance and enough flexibil...

  6. Nakayasu accepts 2013 M.T. Thomas Award | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory | NationalJohn F. Geisz,AerialStaff NUG 2012Nakayasu accepts 2013

  7. EV Everywhere Consumer Acceptance and Charging Infrastructure Workshop:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergyIDIQ Contract ESPC IDIQ ContractConsumer Acceptance Group A Breakout

  8. EV Everywhere Consumer Acceptance and Charging Infrastructure Workshop:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergyIDIQ Contract ESPC IDIQ ContractConsumer Acceptance Group A

  9. EV Everywhere Â… Consumer Acceptance and Charging Infrastructure Workshop

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.Program - LibbyofThisStatement Tuesday, September 25-- Consumer Acceptance and

  10. CHANGE IN ACCEPTABLE ID DOCUMENTS FOR JLAB ACCESS:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone6Energy, science, andAnalysis1 SolelyCHANGE IN ACCEPTABLE ID

  11. Market Acceptance of Advanced Automotive Technologies (MA3T) Model

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergy HealthComments MEMA: CommentsEnergy 13, 1968:CampMarissaMarkAcceptance

  12. EWEB- Solar Electric Program (Rebate)

    Broader source: Energy.gov [DOE]

    '''''Note: EWEB is no longer accepting applications for 2012 incentives. Information regarding 2013 incentives will be available in late December 2012 on the program web site. '''''...

  13. Green Communities Grant Program

    Broader source: Energy.gov [DOE]

    Note: The Green Communities Grant Program is no longer accepting applications. The deadline to receive official designation as a Green Community was October 30, 2012. For designated communities,...

  14. Contact-Handled Transuranic Waste Acceptance Criteria for the Waste Isolation Pilot Plant

    SciTech Connect (OSTI)

    Washington TRU Solutions LLC

    2005-12-29T23:59:59.000Z

    The purpose of this document is to summarize the waste acceptance criteria applicable to the transportation, storage, and disposal of contact-handled transuranic (CH-TRU) waste at the Waste Isolation Pilot Plant (WIPP). These criteria serve as the U.S. Department of Energy's (DOE) primary directive for ensuring that CH-TRU waste is managed and disposed of in a manner that protects human health and safety and the environment.The authorization basis of WIPP for the disposal of CH-TRU waste includes the U.S.Department of Energy National Security and Military Applications of Nuclear EnergyAuthorization Act of 1980 (reference 1) and the WIPP Land Withdrawal Act (LWA;reference 2). Included in this document are the requirements and associated criteriaimposed by these acts and the Resource Conservation and Recovery Act (RCRA,reference 3), as amended, on the CH-TRU waste destined for disposal at WIPP.|The DOE TRU waste sites must certify CH-TRU waste payload containers to thecontact-handled waste acceptance criteria (CH-WAC) identified in this document. Asshown in figure 1.0, the flow-down of applicable requirements to the CH-WAC istraceable to several higher-tier documents, including the WIPP operational safetyrequirements derived from the WIPP CH Documented Safety Analysis (CH-DSA;reference 4), the transportation requirements for CH-TRU wastes derived from theTransuranic Package Transporter-Model II (TRUPACT-II) and HalfPACT Certificates ofCompliance (references 5 and 5a), the WIPP LWA (reference 2), the WIPP HazardousWaste Facility Permit (reference 6), and the U.S. Environmental Protection Agency(EPA) Compliance Certification Decision and approval for PCB disposal (references 7,34, 35, 36, and 37). The solid arrows shown in figure 1.0 represent the flow-down of allapplicable payload container-based requirements. The two dotted arrows shown infigure 1.0 represent the flow-down of summary level requirements only; i.e., the sitesmust reference the regulatory source documents from the U.S. Nuclear RegulatoryCommission (NRC) and the New Mexico Environment Department (NMED) for acomprehensive and detailed listing of the requirements.This CH-WAC does not address the subject of waste characterization relating to adetermination of whether the waste is hazardous; rather, the sites are referred to theWaste Analysis Plan (WAP) contained in the WIPP Hazardous Waste Facility Permit fordetails of the sampling and analysis protocols to be used in determining compliance withthe required physical and chemical properties of the waste. Requirements andassociated criteria pertaining to a determination of the radiological properties of thewaste, however, are addressed in appendix A of this document. The collectiveinformation obtained from waste characterization records and acceptable knowledge(AK) serves as the basis for sites to certify that their CH-TRU waste satisfies the WIPPwaste acceptance criteria listed herein.

  15. Accepted Manuscript Carbon Footprint and emergy combination for Eco-Environmental assessment of

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Accepted Manuscript Carbon Footprint and emergy combination for Eco- Environmental assessment Corre O, Feidt M, Carbon Footprint and emergy combination for Eco- Environmental assessment of cleaner ACCEPTED MANUSCRIPT 1 CARBON FOOTPRINT AND EMERGY COMBINATION FOR ECO- ENVIRONMENTAL ASSESSMENT OF CLEANER

  16. Indoor air movement acceptability and thermal comfort in hot-humid climates

    E-Print Network [OSTI]

    Candido, Christhina Maria

    2010-01-01T23:59:59.000Z

    with the ASHRAE 55 adaptive model’s 90% acceptabilityASHRAE comfort database, it was possible to de?ne 80% and 90%90% thermal acceptability was found within the prescriptions of the ASHRAE

  17. Tank monitor and control system (TMACS) software project Westronics Driver acceptance test

    SciTech Connect (OSTI)

    Glasscock, J.A.

    1998-08-18T23:59:59.000Z

    The acceptance test for the Westronics driver. This driver connects the Westronics Smart Multiplexer with the TMACS monitoring system.

  18. ACCEPTED MANUSCRIPT ACCEPTED MANUSCRIPT

    E-Print Network [OSTI]

    Colominas, Ignasi

    la República, Uruguay, Montevideo 11200, Uruguay, and Accounting and Finance Department, Norte Construcciones, Punta del Este, Maldonado 20100, Uruguay Luis Fuentes García Departamento de Métodos Matemáticos

  19. Accept Reject Accept Reject

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    . publication 420-012 Introduction Aquaculture, the practice of growing finfish and shell- fish under controlled America farmed fish for food and rec- reation prior to 2000 BC. They constructed ponds and raised fish much as fish are raised today. Both freshwa- ter and saltwater fish are currently raised commercially

  20. Author's Accepted Manuscript Tandem structured spectrally selective coating

    E-Print Network [OSTI]

    Fainman, Yeshaiahu

    across the wide solar spectrum has important implications for applications in solar-thermal of solar spectrum, which will find broad applications in solar energy conversion. Keywords: tandem, solar absorption, solar thermal. Introduction The Earth receives an enormous amount of incoming solar

  1. ACCEPTED TO IEEE TRANSACTIONS ON POWER SYSTEMS 1 Application of Public-Domain Market Information

    E-Print Network [OSTI]

    Cañizares, Claudio A.

    forecasts, comparisons with respect to ARIMA models developed for locational marginal prices (LMPs to Forecast Ontario's Wholesale Electricity Prices H. Zareipour, Student Member, IEEE, C.A. Ca~nizares, Senior price (HOEP). In order to do so, relevant data from Ontario and its neighboring electricity markets

  2. The Fund for American Studies is now accepting applications for its Summer 2015 LIVE. LEARN. INTERN.

    E-Print Network [OSTI]

    Buehrer, R. Michael

    Journalism & Communication Philanthropy & Voluntary Service 1621 New Hampshire Ave. NW Washington, DC 20009 PROGRAMS International Affairs & Economics Public Policy & Economics Business & Government Affairs

  3. ORISE: ORISE is accepting applications for the 2015 U.S. Department...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    U.S. Department of Homeland Security Summer Internship Program Program represents opportunity for students to perform research at federal facilities located across the U.S. FOR...

  4. ORISE: Applications being accepted for 2015 spring term of DOE's Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory | NationalJohnSecurityControlsOMBRadiationHow toUndergraduate

  5. ORISE: ORISE is accepting applications for the 2015 Mickey Leland Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory |CHEMPACK MappingHistory The OakMentorExercises andFellowship

  6. ORISE: ORISE is accepting applications for the 2015 U.S. Department of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory |CHEMPACK MappingHistory The OakMentorExercises

  7. ORISE: ORISE is accepting applications for the summer 2015 U.S. Department

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory |CHEMPACK MappingHistory The OakMentorExercisesof Energy Scholars

  8. Energy Department Accepting Small Business Grant Applications for Low-Head

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.Program -Department of Energy

  9. Energy Department Accepting Applications for a $3.6 Million Hydroelectric

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing Zirconia Nanoparticles asSecond stage ofDefects onServices

  10. Accepted Manuscript Kinetic Modelling of High Density PolyEthylene Pyrolysis: Part 1. Comparison of

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Accepted Manuscript Kinetic Modelling of High Density PolyEthylene Pyrolysis: Part 1. Comparison this article as: Gascoin N, Navarro-Rodriguez A, Gillard P, Mangeot A, Kinetic Modelling of High Density PolyEthylene.polymdegradstab.2012.05.008 #12;M ANUSCRIPT ACCEPTED ACCEPTED MANUSCRIPT 1 Kinetic Modelling of High Density PolyEthylene

  11. Acceptability of Four Transformer Top-Oil Thermal Models: Pt. 2: Comparing Metrics

    E-Print Network [OSTI]

    1 Acceptability of Four Transformer Top-Oil Thermal Models: Pt. 2: Comparing Metrics Lida Jauregui transformer top-oil thermal models are examined vis-Ă -vis training with measured data. Acceptability is unacceptable for model identification purposes. The linear top-oil model is acceptable for FOFA transformers

  12. UCSF Bicycle Permit Application Transportation Services

    E-Print Network [OSTI]

    Yamamoto, Keith

    UCSF Bicycle Permit Application Transportation Services 500 Parnassus Ave, Box 0240 MU- P7 Room 26 ____________________________________________________________________ ____________________________ ______________________________ ____________________________________________________________________ Street City State Zip Home Phone Number Work Phone Number Bicycle Make Color Frame Serial #Bicycle Model 1. Bicycles which are not moved for a period of 7 days or longer will be tagged for removal

  13. Magnetospheric application of high-altitude long-duration balloon technology: Daylight auroral observations

    E-Print Network [OSTI]

    Lummerzheim, Dirk

    Magnetospheric application of high-altitude long-duration balloon technology: Daylight auroral; accepted 12 February 2007 Abstract Daylight auroral imaging is a proposed application of the NASA high

  14. White House Office of Science and Technology Policy Summer 2014 Internship Program Application Period

    Broader source: Energy.gov [DOE]

    The White House Office of Science and Technology Policy is currently accepting applications for its Summer 2014 Internship Program.  The application deadline is 11:59pm Friday, March 7.  Students...

  15. W-026 acceptance test report plant control system software(submittal {number_sign}223.02)

    SciTech Connect (OSTI)

    Watson, T.L.

    1997-02-14T23:59:59.000Z

    Acceptance Testing of the WRAP 1 Plant Control System software was conducted throughout the construction of WRAP 1 with final testing on the glovebox software being completed in December 1996. The software tests were broken out into five sections; one for each of the four Local Control Units and one for the supervisory software modules. This document contains a completed copy of the software tests along with the applicable test log and completed Exception Test Reports. The ETRs outside the scope of the contractor are not signed off. These will be resolved by the Buyer and all 1280 open issues will be tracked on Buyer`s ETR database pending resolution.

  16. Acceptable approaches for beneficial use of cement kiln dust

    SciTech Connect (OSTI)

    Schreiber, R.J.; Smeenk, S.D. [Schreiber, Yonley and Associates, St. Louis, MO (United States)

    1998-12-31T23:59:59.000Z

    One beneficial use of cement kiln dust (CKD) is application of CKD to cropland as agricultural lime or fertilizer. However, the EPA has expressed a concern over land application of CKD when the metals constituents in the CKD are above the industry-wide median levels presented in EPA`s Report to Congress on Cement Kiln Dust. Under the Clean Water Act, EPA has established limits for metals concentrations in sewage sludge that is applied to the land for beneficial use of the nitrogen in the sludge. The limits for land application of sewage sludge were established based on the results of exposure risk assessments. A comparison of the median industry-wide metals concentrations in CKD to the metals concentration limits for land application of sewage sludge indicates that all trace metal concentrations IN CKD are below the corresponding sewage sludge land application limit, with the exception of the median level of arsenic from one data set. EPA has determined that land application of CKD with metals concentration limits at or below the industry-wide median concentrations does not pose a significant human cancer or non-cancer health risk. Therefore, with appropriate limits, CKD can be beneficially reused for land application on agricultural land in a manner that is protective of human health and the environment.

  17. High energy resolution, high angular acceptance crystal monochromator

    DOE Patents [OSTI]

    Alp, Ercan E. (Bolingbrook, IL); Mooney, Timothy M. (Westmont, IL); Toellner, Thomas (Green Bay, WI)

    1996-06-04T23:59:59.000Z

    A 4-bounce dispersive crystal monochromator reduces the bandpass of synchrotron radiation to a 10-50 meV range without sacrificing angular acceptance. The monochromator includes the combination of an asymmetrical channel-cut single crystal of lower order reflection and a symmetrical channel-cut single crystal of higher order reflection in a nested geometric configuration. In the disclosed embodiment, a highly asymmetrically cut (.alpha.=20) outer silicon crystal (4 2 2) with low order reflection is combined with a symmetrically cut inner silicon crystal (10 6 4) with high order reflection to condition a hard x-ray component (5-30 keV) of synchrotron radiation down to the .mu.eV-neV level. Each of the crystals is coupled to the combination of a positioning inchworm and angle encoder via a respective rotation stage for accurate relative positioning of the crystals and precise energy tuning of the monochromator.

  18. Acceptance test procedure for SY Tank Farm replacement exhauster unit

    SciTech Connect (OSTI)

    Becken, G.W.

    1994-12-16T23:59:59.000Z

    The proper functioning of a new 241-SY Tank Farm replacement exhauster will be acceptance tested, to establish operability and to provide an operational baseline for the equipment. During this test, a verification of all of the alarm and control circuits associated with the exhaust, which provide operating controls and/or signals to local and remote alarm/annunciator panels, shall be performed. Test signals for sensors that provide alarms, warnings, and/or interlocks will be applied to verify that alarm, warning, and interlock setpoints are correct. Alarm and warning lights, controls, and local and remote readouts for the exhauster will be verified to be adequate for proper operation of the exhauster. Testing per this procedure shall be conducted in two phases. The first phase of testing, to verify alarm, warning, and interlock setpoints primarily, will be performed in the MO-566 Fab Shop. The second phase of testing, to verify proper operation and acceptable interface with other tank farm systems, will be conducted after the exhauster and all associated support and monitoring equipment have been installed in the SY Tank Farm. The exhauster, which is mounted on a skid and which will eventually be located in the SY tank farm, receives input signals from a variety of sensors mounted on the skid and associated equipment. These sensors provide information such as: exhauster system inlet vacuum pressure; prefilter and HEPA filter differential pressures; exhaust stack sampler status; exhaust fan status; system status (running/shut down); and radiation monitoring systems status. The output of these sensors is transmitted to the exhauster annunciator panel where the signals are displayed and monitored for out-of-specification conditions.

  19. Communication accepte: Healthy Buildings/IAQ'97 Washington DC, septembre 1997Communication accepte: Healthy Buildings/IAQ'97 Washington DC, septembre 1997 DISCRIMINATION OF VOLATILE ORGANIC COMPOUNDS

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Communication acceptée: Healthy Buildings/IAQ'97 Washington DC, septembre 1997Communication acceptée: Healthy Buildings/IAQ'97 Washington DC, septembre 1997 DISCRIMINATION OF VOLATILE ORGANIC manuscript, published in "4th International Conference on Healthy Buildings'97, Washington : United States

  20. Assessment of national systems for obtaining local acceptance of waste management siting and routing activities

    SciTech Connect (OSTI)

    Paige, H.W.; Lipman, D.S.; Owens, J.E.

    1980-07-01T23:59:59.000Z

    There is a rich mixture of formal and informal approaches being used in our sister nuclear democracies in their attempts to deal with the difficulties of obtaining local acceptance for siting of waste management facilities and activities. Some of these are meeting with a degree of success not yet achieved in the US. Although this survey documents and assesses many of these approaches, time did not permit addressing in any detail their relevance to common problems in the US. It would appear the US could benefit from a periodic review of the successes and failures of these efforts, including analysis of their applicability to the US system. Of those countries (Germany, Sweden, Switzerland, Japan, Belgium, and the US) who are working to a time table for the preparation of a high-level waste (HLW) repository, Germany is the only country to have gained local siting acceptance for theirs. With this (the most difficult of siting problems) behind them they appear to be in the best overall condition relative to waste management progress and plans. This has been achieved without a particularly favorable political structure, made up for by determination on the part of the political leadership. Of the remaining three countries studied (France, UK and Canada) France, with its AVM production facility, is clearly the world leader in the HLW immobilization aspect of waste management. France, Belgium and the UK appear to have the least favorable political structures and environments for arriving at waste management decisions. US, Switzerland and Canada appear to have the least favorable political structures and environments for arriving at waste management decisions.

  1. Accelerating Acceptance of Fuel Cell Backup Power Systems - Final Report

    SciTech Connect (OSTI)

    Petrecky, James; Ashley, Christopher

    2014-07-21T23:59:59.000Z

    Since 2001, Plug Power has installed more than 800 stationary fuel cell systems worldwide. Plug Power’s prime power systems have produced approximately 6.5 million kilowatt hours of electricity and have accumulated more than 2.5 million operating hours. Intermittent, or backup, power products have been deployed with telecommunications carriers and government and utility customers in North and South America, Europe, the United Kingdom, Japan and South Africa. Some of the largest material handling operations in North America are currently using the company’s motive power units in fuel cell-powered forklifts for their warehouses, distribution centers and manufacturing facilities. The low-temperature GenSys fuel cell system provides remote, off-grid and primary power where grid power is unreliable or nonexistent. Built reliable and designed rugged, low- temperature GenSys delivers continuous or backup power through even the most extreme conditions. Coupled with high-efficiency ratings, low-temperature GenSys reduces operating costs making it an economical solution for prime power requirements. Currently, field trials at telecommunication and industrial sites across the globe are proving the advantages of fuel cells—lower maintenance, fuel costs and emissions, as well as longer life—compared with traditional internal combustion engines.

  2. 2014 NASA Planetary Science Summer School Applications Open NASA is accepting applications from science and engineering post-docs,

    E-Print Network [OSTI]

    Rathbun, Julie A.

    Thermoelectric Generators (MMRTG). The session in August will have a targeted focus on spacecraft power systems power system trade-offs, including the use of solar electric vs. Multi-mission Radioisotope

  3. APPLICATION OF SPECTROSCOPIC METHODS FOR THE AUTOMATION OF OIL PALM CULTURE APPLICATION OF SPECTROSCOPIC METHODS

    E-Print Network [OSTI]

    Sinskey, Anthony J.

    APPLICATION OF SPECTROSCOPIC METHODS FOR THE AUTOMATION OF OIL PALM CULTURE 1 APPLICATION OF SPECTROSCOPIC METHODS FOR THE AUTOMATION OF OIL PALM CULTURE LAURA B WILLIS*; GUSTAVO A GIL**; HARRY L T LEE: 17 August 2007; Received in final form: 25 October 2007; Accepted: 7 November 2007. ABSTRACT Oil palm

  4. Data Quality Objectives for WTP Feed Acceptance Criteria - 12043

    SciTech Connect (OSTI)

    Arakali, Aruna V.; Benson, Peter A.; Duncan, Garth; Johnston, Jill C.; Lane, Thomas A.; Matis, George; Olson, John W. [Hanford Tank Waste Treatment and Immobilization Plant (United States); Banning, Davey L.; Greer, Daniel A.; Seidel, Cary M.; Thien, Michael G. [Hanford Tank Operations Contractor - Washington River Protection Solutions, Richland, WA 99354 (United States)

    2012-07-01T23:59:59.000Z

    The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is under construction for the U.S. Department of Energy by Bechtel National, Inc. and subcontractor URS Corporation (contract no. DE-AC27-01RV14136). The plant when completed will be the world's largest nuclear waste treatment facility. Bechtel and URS are tasked with designing, constructing, commissioning, and transitioning the plant to the long term operating contractor to process the legacy wastes that are stored in underground tanks (from nuclear weapons production between the 1940's and the 1980's). Approximately 56 million gallons of radioactive waste is currently stored in these tanks at the Hanford Site in southeastern Washington. There are three major WTP facilities being constructed for processing the tank waste feed. The Pretreatment (PT) facility receives feed where it is separated into a low activity waste (LAW) fraction and a high level waste (HLW) fraction. These fractions are transferred to the appropriate (HLW or LAW) facility, combined with glass former material, and sent to high temperature melters for formation of the glass product. In addition to PT, HLW and LAW, other facilities in WTP include the Laboratory (LAB) for analytical services and the Balance of Facilities (BOF) for plant maintenance, support and utility services. The transfer of staged feed from the waste storage tanks and acceptance in WTP receipt vessels require data for waste acceptance criteria (WAC) parameters from analysis of feed samples. The Data Quality Objectives (DQO) development was a joint team effort between WTP and Tank Operations Contractor (TOC) representatives. The focus of this DQO effort was to review WAC parameters and develop data quality requirements, the results of which will determine whether or not the staged feed can be transferred from the TOC to WTP receipt vessels. The approach involved systematic planning for data collection consistent with EPA guidance for the seven-step DQO process. Data quality requirements for sample collection and analysis of all WAC parameters were specified during the DQO process. There were eighteen key parameters identified with action limits to ensure the feed transfer and receipt would not exceed plant design, safety, permitting, and processing requirements. The remaining WAC parameters were grouped in the category for obtaining data according to WTP contract specifications, regulatory reporting requirements, and for developing the feed campaign processing sequence. (authors)

  5. Waste Acceptance for Vitrified Sludge from Oak Ridge Tank Farms

    SciTech Connect (OSTI)

    Harbour, J.R. [Westinghouse Savannah River Company, AIKEN, SC (United States); Andrews, M.K.

    1998-03-01T23:59:59.000Z

    The Tanks Focus Area of the DOE`s Office of Science and Technology (EM-50) has funded the Savannah River Technology Center (SRTC) to develop formulations which can incorporate sludges from Oak Ridge Tank Farms into immobilized glass waste forms. The four tank farms included in this study are: Melton Valley Storage Tanks (MVST), Bethel Valley Evaporation Service Tanks (BVEST), Gunite and Associated Tanks (GAAT), and Old Hydrofracture Tanks (OHF).The vitrified waste forms must be sent for disposal either at the Waste Isolation Pilot Plant (WIPP) or the Nevada Test Site (NTS). Waste loading in the glass is the major factor in determining where the waste will be sent and whether the waste will be remote-handled (RH) or contact-handled (CH). In addition, the waste loading significantly impacts the costs of vitrification operations and transportation to and disposal within the repository.This paper focuses on disposal options for the vitrified Oak Ridge Tank sludge waste as determined by the WIPP (1) and NTS (2) Waste Acceptance Criteria (WAC). The concentrations for both Transuranic (TRU) and beta/gamma radionuclides in the glass waste form will be presented a a function of sludge waste loading. These radionuclide concentrations determine whether the waste forms will be TRU (and therefore disposed of at WIPP) and whether the waste forms will be RH or CH.

  6. Comparison of the Acceptability of Various Oil Shale Processes

    SciTech Connect (OSTI)

    Burnham, A K; McConaghy, J R

    2006-03-11T23:59:59.000Z

    While oil shale has the potential to provide a substantial fraction of our nation's liquid fuels for many decades, cost and environmental acceptability are significant issues to be addressed. Lawrence Livermore National Laboratory (LLNL) examined a variety of oil shale processes between the mid 1960s and the mid 1990s, starting with retorting of rubble chimneys created from nuclear explosions [1] and ending with in-situ retorting of deep, large volumes of oil shale [2]. In between, it examined modified-in-situ combustion retorting of rubble blocks created by conventional mining and blasting [3,4], in-situ retorting by radio-frequency energy [5], aboveground combustion retorting [6], and aboveground processing by hot-solids recycle (HRS) [7,8]. This paper reviews various types of processes in both generic and specific forms and outlines some of the tradeoffs for large-scale development activities. Particular attention is given to hot-recycled-solids processes that maximize yield and minimize oil shale residence time during processing and true in-situ processes that generate oil over several years that is more similar to natural petroleum.

  7. E-Print Network 3.0 - acceptance scintillator detector Sample...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    THE DEUTERON Summary: the experiment 003 experimental setup. Experiment003 used the Saskatchewan-Alberta Large AcceptanceDetector... .1 SALAD E scintillator geometry in GEANT. . ....

  8. Acceptance test report, 241-AW air inlet filter station pressure decay test

    SciTech Connect (OSTI)

    Tuck, J.A.

    1996-02-21T23:59:59.000Z

    This is the acceptance test report for pressure decay tests performed on newly-installed 241-AW Tank Farm primary ventilation system air inlet filter stations.

  9. Systems acceptance and operability testing for rotary mode core sampling in flammable gas tanks

    SciTech Connect (OSTI)

    Corbett, J.E., Westinghouse Hanford

    1996-07-29T23:59:59.000Z

    This document provides instructions for the system acceptance and operability testing of the rotary mode core sampling system, modified for use in flammable gas tanks.

  10. E-Print Network 3.0 - air movement acceptability Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science and Theory Disposal: Science and Theory Summary: in animal feed Transportation logistics Movement of infectious material Reluctance to accept... methods...

  11. ASHRAE Standard 62.2. Ventilation and Acceptable Indoor Air Quality...

    Energy Savers [EERE]

    Standard 62.2. Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings More Documents & Publications Low-Cost Ventilation in Production Housing -...

  12. E-Print Network 3.0 - acceptance product specifications Sample...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    has been accepted for publication. As a service to our customers we... the production process errors may be discovered which could affect the content, and all legal disclaimers...

  13. E-Print Network 3.0 - analysis acceptance criteria Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    also did not result in acceptable criteria. In general... Analysis (PVA) approachphilosophy; and (5) explicitly identify the ... Source: Alaska Fisheries Science Center...

  14. E-Print Network 3.0 - acceptance criteria analysis Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    also did not result in acceptable criteria. In general... Analysis (PVA) approachphilosophy; and (5) explicitly identify the ... Source: Alaska Fisheries Science Center...

  15. E-Print Network 3.0 - acceptance threshold hypothesis Sample...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for threshold... Parametrization of the increase of the aeolian erosion threshold wind friction velocity due to soil... February 1998 Revised: 11 May 1998 Accepted: 25...

  16. ISOLOK VALVE ACCEPTANCE TESTING FOR DWPF SME SAMPLING PROCESS

    SciTech Connect (OSTI)

    Edwards, T.; Hera, K.; Coleman, C.; Jones, M.; Wiedenman, B.

    2011-12-05T23:59:59.000Z

    Evaluation of the Defense Waste Processing Facility (DWPF) Chemical Process Cell (CPC) cycle time identified several opportunities to improve the CPC processing time. Of the opportunities, a focus area related to optimizing the equipment and efficiency of the sample turnaround time for DWPF Analytical Laboratory was identified. The Mechanical Systems & Custom Equipment Development (MS&CED) Section of the Savannah River National Laboratory (SRNL) evaluated the possibility of using an Isolok{reg_sign} sampling valve as an alternative to the Hydragard{reg_sign} valve for taking process samples. Previous viability testing was conducted with favorable results using the Isolok sampler and reported in SRNL-STI-2010-00749 (1). This task has the potential to improve operability, reduce maintenance time and decrease CPC cycle time. This report summarizes the results from acceptance testing which was requested in Task Technical Request (TTR) HLW-DWPF-TTR-2010-0036 (2) and which was conducted as outlined in Task Technical and Quality Assurance Plan (TTQAP) SRNL-RP-2011-00145 (3). The Isolok to be tested is the same model which was tested, qualified, and installed in the Sludge Receipt Adjustment Tank (SRAT) sample system. RW-0333P QA requirements apply to this task. This task was to qualify the Isolok sampler for use in the DWPF Slurry Mix Evaporator (SME) sampling process. The Hydragard, which is the current baseline sampling method, was used for comparison to the Isolok sampling data. The Isolok sampler is an air powered grab sampler used to 'pull' a sample volume from a process line. The operation of the sampler is shown in Figure 1. The image on the left shows the Isolok's spool extended into the process line and the image on the right shows the sampler retracted and then dispensing the liquid into the sampling container. To determine tank homogeneity, a Coliwasa sampler was used to grab samples at a high and low location within the mixing tank. Data from the two locations were compared to determine if the contents of the tank were well mixed. The Coliwasa sampler is a tube with a stopper at the bottom and is designed to obtain grab samples from specific locations within the drum contents. A position paper (4) was issued to address the prototypic flow loop issues and simulant selections. A statistically designed plan (5) was issued to address the total number of samples each sampler needed to pull, to provide the random order in which samples were pulled and to group samples for elemental analysis. The TTR required that the Isolok sampler perform as well as the Hydragard sampler during these tests to ensure the acceptability of the Isolok sampler for use in the DWPF sampling cells. Procedure No.L9.4-5015 was used to document the sample parameters and process steps. Completed procedures are located in R&D Engineering job folder 23269.

  17. New applications for enzymes in oil and gas production

    SciTech Connect (OSTI)

    Harris, R.E.; McKay, I.D. [Cleansorb Ltd., Yateley (United Kingdom)

    1999-04-01T23:59:59.000Z

    Enzymes have been previously used as gel breakers. In these applications, the enzyme removes a chemical which is no longer required, such as biopolymers in filter cakes after drilling or in frac gels after the frac has occurred. Enzymes are now used to produce useful oilfield chemicals in-situ for acidizing, sand consolidation and water shutoff applications. Enzyme-based processes for generating other useful oil-field chemicals, including minerals, gels and resins, are being developed, and these applications are discussed.

  18. Automatic scanning of nuclear emulsions with wide-angle acceptance for nuclear fragment detection

    E-Print Network [OSTI]

    T. Fukuda; S. Fukunaga; H. Ishida; K. Kodama; T. Matsuo; S. Mikado; S. Ogawa; H. Shibuya; J. Sudo

    2013-01-09T23:59:59.000Z

    Nuclear emulsion, a tracking detector with sub-micron position resolution, has played a successful role in the field of particle physics and the analysis speed has been substantially improved by the development of automated scanning systems. This paper describes a newly developed automated scanning system and its application to the analysis of nuclear fragments emitted almost isotropically in nuclear evaporation. This system is able to recognize tracks of nuclear fragments up to |tan{\\theta}|nuclear emulsion is the first trial. Furthermore the track recognition algorithm is performed by a powerful Graphics Processing Unit (GPU) for the first time. This GPU has a sufficient computing power to process large area scanning data with a wide angular acceptance and enough flexibility to allow the tuning of the recognition algorithm. This new system will in particular be applied in the framework of the OPERA experiment : the background in the sample of tau decay candidates due to hadronic interactions will be reduced by a better detection of the emitted nuclear fragments.

  19. RH-TRU Waste Characterization by Acceptable Knowledge at the Idaho National Engineering and Environmental Laboratory

    SciTech Connect (OSTI)

    Schulz, C.; Givens, C.; Bhatt, R.; Whitworth, J.

    2003-02-24T23:59:59.000Z

    Idaho National Engineering and Environmental Laboratory (INEEL) is conducting an effort to characterize approximately 620 drums of remote-handled (RH-) transuranic (TRU) waste currently in its inventory that were generated at the Argonne National Laboratory-East (ANL-E) Alpha Gamma Hot Cell Facility (AGHCF) between 1971 and 1995. The waste was generated at the AGHCF during the destructive examination of irradiated and unirradiated fuel pins, targets, and other materials from reactor programs at ANL-West (ANL-W) and other Department of Energy (DOE) reactors. In support of this effort, Shaw Environmental and Infrastructure (formerly IT Corporation) developed an acceptable knowledge (AK) collection and management program based on existing contact-handled (CH)-TRU waste program requirements and proposed RH-TRU waste program requirements in effect in July 2001. Consistent with Attachments B-B6 of the Waste Isolation Pilot Plant (WIPP) Hazardous Waste Facility Permit (HWFP) and th e proposed Class 3 permit modification (Attachment R [RH-WAP] of this permit), the draft AK Summary Report prepared under the AK procedure describes the waste generating process and includes determinations in the following areas based on AK: physical form (currently identified at the Waste Matrix Code level); waste stream delineation; applicability of hazardous waste numbers for hazardous waste constituents; and prohibited items. In addition, the procedure requires and the draft summary report contains information supporting determinations in the areas of defense relationship and radiological characterization.

  20. Identification of permit and waste acceptance criteria provisions requiring modification for acceptance of commercial mixed waste. National Low-Level Waste Management Program

    SciTech Connect (OSTI)

    Not Available

    1994-03-01T23:59:59.000Z

    In October 1990, representatives of States and compact regions requested that the US Department of Energy (DOE) explore an agreement with host States and compact regions under which DOE would accept commercial mixed low-level radioactive waste (LLW) at DOE`s own treatment and disposal facilities. A program for DOE management of commercial mixed waste is made potentially more attractive in light of the low commercial mixed waste volumes, high regulatory burdens, public opposition to new disposal sites, and relatively high cost of constructing commercial disposal facilities. Several studies were identified as essential in determining the feasibility of DOE accepting commercial mixed waste for disposal. The purpose of this report is to identify any current or proposed waste acceptance criteria (WAC) or Resource Conservation and Recovery Act (RCRA) provisions that would have to be modified for commercial mixed waste acceptance at specified DOE facilities. Following the introduction, Section 2 of this report (a) provides a background summary of existing and proposed mixed waste disposal facilities at each DOE site, and (b) summarizes the status of any RCRA Part B permit and WAC provisions relating to the disposal of mixed waste, including provisions relating to acceptance of offsite waste. Section 3 provides overall conclusions regarding the current status and permit modifications that must be implemented in order to grant DOE sites authority under their permits to accept commercial mixed waste for disposal. Section 4 contains a list of references.

  1. Accepting Mixed Waste as Alternate Feed Material for Processing and Disposal at a Licensed Uranium Mill

    SciTech Connect (OSTI)

    Frydenland, D. C.; Hochstein, R. F.; Thompson, A. J.

    2002-02-26T23:59:59.000Z

    Certain categories of mixed wastes that contain recoverable amounts of natural uranium can be processed for the recovery of valuable uranium, alone or together with other metals, at licensed uranium mills, and the resulting tailings permanently disposed of as 11e.(2) byproduct material in the mill's tailings impoundment, as an alternative to treatment and/or direct disposal at a mixed waste disposal facility. This paper discusses the regulatory background applicable to hazardous wastes, mixed wastes and uranium mills and, in particular, NRC's Alternate Feed Guidance under which alternate feed materials that contain certain types of mixed wastes may be processed and disposed of at uranium mills. The paper discusses the way in which the Alternate Feed Guidance has been interpreted in the past with respect to processing mixed wastes and the significance of recent changes in NRC's interpretation of the Alternate Feed Guidance that sets the stage for a broader range of mixed waste materials to be processed as alternate feed materials. The paper also reviews the le gal rationale and policy reasons why materials that would otherwise have to be treated and/or disposed of as mixed waste, at a mixed waste disposal facility, are exempt from RCRA when reprocessed as alternate feed material at a uranium mill and become subject to the sole jurisdiction of NRC, and some of the reasons why processing mixed wastes as alternate feed materials at uranium mills is preferable to direct disposal. Finally, the paper concludes with a discussion of the specific acceptance, characterization and certification requirements applicable to alternate feed materials and mixed wastes at International Uranium (USA) Corporation's White Mesa Mill, which has been the most active uranium mill in the processing of alternate feed materials under the Alternate Feed Guidance.

  2. Nuclear Data Measurements for 21st Century Reactor Physics Applications

    SciTech Connect (OSTI)

    Rahmat Aryaeinejad; Jerald D. Cole; Mark W. Drigert; James K. Jewell; Christopher A. McGrath; David W. Nigg; Edward L. Reber

    2003-03-01T23:59:59.000Z

    The United States Department of Energy (DOE), Office of Nuclear Energy (NE) has embarked on a long-term program to significantly advance the science and technology of nuclear energy. This is in response to the overall national plan for accelerated development of domestic energy resources on several fronts, punctuated by recent dramatic events that have emphasized the need for the US to reduce its dependence on foreign petroleum supplies. Key aspects of the DOE-NE agenda are embodied in the Generation-IV (Gen-IV) advanced nuclear energy systems development program and in the Advanced Fuel Cycle (AFC) program. The planned efforts involve near-term and intermediate-term improvements in fuel utilization and recycling in current nuclear power reactor systems as well as the longer-term development of new nuclear energy systems that offer much improved fuel utilization and proliferation resistance, along with continued advances in operational safety. The success of the overall NE effort will depend not only on sophisticated system development and engineering, but also on the advances in the supporting sciences and technologies. Of these, one of the most important is the improvement of the relevant fundamental nuclear science data bases, especially the evaluated neutron interaction cross section files that serve as the foundation of all reactor system designs, operating strategies, and fuel cycle engineering activities. The new concepts for reactors and fuel cycles involve the use of transuranic nuclides that were previously of little interest, and where experimentally measured information is lacking. The current state of the cross section database for some of these nuclides is such that design computations for advanced fast-spectrum reactor systems and fuel cycles that incorporate such materials in significant quantities are meaningful only for approximate conceptual applications. No actual system could reliably be designed according to currently accepted standards, nor could such a system be safely and efficiently operated, with the limited nuclear data and related information now available.

  3. Role of pilot projects and public acceptance in developing wireless power transmission as an enabling technology for space solar power systems

    SciTech Connect (OSTI)

    Woodell, M.I. [Bivings Woodell, Inc., Washington, DC (United States)] [Bivings Woodell, Inc., Washington, DC (United States); Schupp, B.W. [Raytheon Electronic Systems, Marlborough, MA (United States)] [Raytheon Electronic Systems, Marlborough, MA (United States)

    1996-12-31T23:59:59.000Z

    In all system concepts for delivering space solar power to terrestrial power systems, wireless power transmission (WPT) is identified as a critical link in the technology chain. To realize the full potential of WPT as an enabling technology for the development of space power systems, the technology needs to (1) be demonstrated as a commercially viable, low risk technology, and (2) be shown to be acceptable to the public. If WPT`s full potential is to be realized, its initial applications must be carefully chosen and demonstrated through a series of pilot projects which will develop both the technology and its public acceptance. This paper examines the role of pilot projects and how they will play an increasingly important role in the development and acceptance of WPT as an enabling technology for space solar power systems. Recognizing that public acceptance is the ultimate determinant of the commercial success or failure of a technology, the paper then explores the role of public opinion in the commercialization process of space solar power systems utilizing WPT. A framework that begins to define the process required to realize the full commercial potential of wireless power transmission is established. 21 refs., 1 fig., 2 tabs.

  4. DOE Accepted Carriers Date: April 8, 2008 POC: Dave Lopez, MA-30

    E-Print Network [OSTI]

    Airline 24 Air Arabia United Arab Emirates ICAO Designated Cat 1 Carrier 25 Air Astana Kazakhstan IATA Inc United States DoD-Accepted Air Carrier 36 Air Charters Inc United States DOE-Accepted Charter 37 with United Airlines & IATA Member 39 Air Creebec, Inc. Canada ICAO Designated Cat 1 Carrier 40 Air Deccan

  5. Sociobiology in Sweden from taboo to partial acceptance Birgitta S. Tullberg

    E-Print Network [OSTI]

    Tullberg, Birgitta

    1 Sociobiology in Sweden­ from taboo to partial acceptance Birgitta S. Tullberg Department of Zoology Stockholm University S-10691 Stockholm Sweden Svante Folin Army Museum Stockholm Sweden Abstract. In a secularized country such as Sweden one could perhaps expect that sociobiology was readily accepted as another

  6. ACCEPTED MANUSCRIPT The behaviour of Rare-Earth Elements, Zr and Hf during biologically-mediated

    E-Print Network [OSTI]

    ACCEPTED MANUSCRIPT ACCEPTED MANUSCRIPT 1 The behaviour of Rare-Earth Elements, Zr and Hf during.a,b* , Cangemi M.a , Brusca L.c , Madonia P.c , Saiano F.d , Zuddas P.e a) Department of Earth and Marine at the solid-liquid interface influencing the distribution of trace elements onto microbial surfaces. Since

  7. 2007 Colorado State University Combined Research and Extension Annual Report Status: Accepted

    E-Print Network [OSTI]

    2007 Colorado State University Combined Research and Extension Annual Report Status: Accepted Date Accepted: 08/27/08 2007 Colorado State University Combined Research and Extension Annual Report 1 to programming and a re-newed vision to Colorado Extension work. The changing economy resulted in a new emphasis

  8. Accepted Manuscript Title: Evolving a Bayesian Classifier for ECG-based Age

    E-Print Network [OSTI]

    Litt, Brian

    Accepted Manuscript Title: Evolving a Bayesian Classifier for ECG-based Age Classification, A. Saad, B. Litt, G. Vachtsevanos, Evolving a Bayesian Classifier for ECG-based Age Classification that apply to the journal pertain. #12;AcceptedManuscript 1 Evolving a Bayesian Classifier for ECG-based Age

  9. S. Wasterlain, D. Candusso, F. Harel, X. Franois, D. Hissel. Development of test instruments and protocols for the diagnostic of fuel cell stacks. Accept dans Journal of Power Sources suite 12th

    E-Print Network [OSTI]

    Boyer, Edmond

    for the integration of fuel cell systems into real applications such as vehicles or stationary gensets and protocols for the diagnostic of fuel cell stacks. Accepté dans Journal of Power Sources suite à 12th Ulm for the diagnostic of fuel cell stacks Sébastien Wasterlain 1,2 , Denis Candusso 1,3,* , Fabien Harel 1,3 , Daniel

  10. South Florida Bee College Vendor Application

    E-Print Network [OSTI]

    Jawitz, James W.

    South Florida Bee College Vendor Application Friday August 15th and Saturday August 16th 2014 UF 2014. Vendors will be notified of acceptance by July 14th 2014. Please note there is a 50$/day vending fee payable by check. Vendors will be assigned spots. Arrival time: 47pm Thurs 8/14 #12;

  11. International Conference on INTERNET TECHNOLOGIES AND APPLICATIONS

    E-Print Network [OSTI]

    Davies, John N.

    ), will be held in Wrexham, North East Wales, UK from Wednesday 7th to Friday 9th September 2005. The conferenceInternational Conference on INTERNET TECHNOLOGIES AND APPLICATIONS ITA 05 Wednesday 7th - Friday 9 computing and engineering. Accepted papers will be published in the conference proceedings. Suitable topics

  12. TRU (transuranic) waste certification compliance requirements for acceptance of contact-handled wastes retrieved from storage to be shipped to the Waste Isolation Pilot Plant: Revision 2

    SciTech Connect (OSTI)

    Not Available

    1989-01-01T23:59:59.000Z

    Compliance requirements are presented for certifying that unclassified, contact-handled (CH) transuranic (TRU) solid defense wastes retrieved from storage at DOE sites meet the Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria (WAC). All applicable Department of Energy (DOE) orders must continue to be met. The compliance requirements for acceptance of newly generated CH waste to be shipped to the WIPP are addressed in another document. The compliance requirements are divided into four sections, primarily determined by the general feature that the requirements address. These sections are General Requirements, Waste Container Requirements, Waste Form Requirements, and Waste Package Requirements. The waste package is the combination of waste container and waste. 10 refs., 1 fig.

  13. Children's Brain Development Benefits from Longer Gestation

    E-Print Network [OSTI]

    2011-01-01T23:59:59.000Z

    Mapping of the Human Brain. NeuroImage, Sendai, Japan.2005). Regional deficits in brain volume in schizophrenia: areso- nance imaging of brain development in premature and

  14. 'Thirsty' Metals Key to Longer Battery Lifetimes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contact: Kathy Kincade, +1 510 495 2124, kkincade@lbl.gov PCCPxantheascover Imagine a cell phone battery that lasted a whole week on a single charge. A car battery that worked...

  15. 'Thirsty' Metals Key to Longer Battery Lifetimes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert SouthwestTechnologies | BlandinePrinceton Plasma

  16. Sleepless in Seattle No Longer Joshua Reich

    E-Print Network [OSTI]

    Narasayya, Vivek

    ­ a significant waste of both energy and money. Indeed, potential savings can amount to millions of dollars per have been proposed, few have been evaluated via real deployments. We have built and deployed a light lightweight approach effected significant energy savings by allowing user machines to sleep (most sleeping

  17. Multi-discipline Waste Acceptance Process at the Nevada National Security Site - 13573

    SciTech Connect (OSTI)

    Carilli, Jhon T. [US Department Of Energy, Nevada Site Office, P. O. Box 98518, Las Vegas, Nevada 89193-8518 (United States)] [US Department Of Energy, Nevada Site Office, P. O. Box 98518, Las Vegas, Nevada 89193-8518 (United States); Krenzien, Susan K. [Navarro-Intera, LLC, P. O. Box 98952, Las Vegas, Nevada 89193-8952 (United States)] [Navarro-Intera, LLC, P. O. Box 98952, Las Vegas, Nevada 89193-8952 (United States)

    2013-07-01T23:59:59.000Z

    The Nevada National Security Site low-level radioactive waste disposal facility acceptance process requires multiple disciplines to ensure the protection of workers, the public, and the environment. These disciplines, which include waste acceptance, nuclear criticality, safety, permitting, operations, and performance assessment, combine into the overall waste acceptance process to assess low-level radioactive waste streams for disposal at the Area 5 Radioactive Waste Management Site. Four waste streams recently highlighted the integration of these disciplines: the Oak Ridge Radioisotope Thermoelectric Generators and Consolidated Edison Uranium Solidification Project material, West Valley Melter, and classified waste. (authors)

  18. EA-0912: Urgent-Relief Acceptance of Foreign Research Reactor Spent Nuclear Fuel

    Broader source: Energy.gov [DOE]

    This EA evaluates the environmental impacts of a proposal to accept 409 spent fuel elements from eight foreign research reactors in seven European countries.  The spent fuel would be shipped across...

  19. Geologic Storage of carbon dioxide : risk analyses and implications for public acceptance

    E-Print Network [OSTI]

    Singleton, Gregory R. (Gregory Randall)

    2007-01-01T23:59:59.000Z

    Carbon Capture and Storage (CCS) technology has the potential to enable large reductions in global greenhouse gas emissions, but one of the unanswered questions about CCS is whether it will be accepted by the public. In ...

  20. E-Print Network 3.0 - acceptability asme section Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    acceptability asme section Page: << < 1 2 3 4 5 > >> 1 Model Checking Abstract State Machines Marc Spielmann Summary: , for example, ASMs defined by means of a single rule of the...

  1. Project W-320, tank 241-C-106 sluicing acceptance for beneficial use

    SciTech Connect (OSTI)

    BAILEY, J.W.

    1999-05-18T23:59:59.000Z

    The purpose of this document is to identify the Project W-320 Chiller Documentation required to be turned over from the Projects Organization to Tank Farm Operations as part of the acceptance of the new equipment for beneficial use.

  2. Accepted Manuscript Kinetic modelling of high density polyethylene pyrolysis: Part 2. Reduction of existing

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Accepted Manuscript Kinetic modelling of high density polyethylene pyrolysis: Part 2. Reduction density polyethylene pyrolysis: Part 2. Reduction of existing detailed mechanism, Polymer Degradation Modelling of High Density PolyEthylene Pyrolysis: Part 2. Reduction of existing detailed mechanism. N

  3. Participant/assessor personality characteristics that influence feedback acceptance in developmental assessment centers

    E-Print Network [OSTI]

    Bell, Suzanne Tamara

    2001-01-01T23:59:59.000Z

    The objective of the present study was to determine whether specified factors influenced the acceptance of feedback by participants (N = 113) in an operational developmental assessment center. Specifically, the relationship between participants...

  4. Dependability and acceptability of handheld computers in school-based data collection

    E-Print Network [OSTI]

    Adiguzel, Tufan

    2009-05-15T23:59:59.000Z

    Given the increasing influence of technology and the explosion in data collection demands, the acceptance and assimilation of new paradigms and technologies require today’s educators, researchers, and evaluators to select appropriate tools and apply...

  5. IEEE COMMUNICATIONS SURVEYS & TUTORIALS, ACCEPTED FOR PUBLICATION 1 Stochastic Information Management in Smart Grid

    E-Print Network [OSTI]

    Shen, Xuemin "Sherman"

    of energy sup- ply for residential, commercial, and industrial sectors in the foreseeable future. However, to reduce the greenhouse gas (GHG) emissions in energy consumption, electricity customers have beenIEEE COMMUNICATIONS SURVEYS & TUTORIALS, ACCEPTED FOR PUBLICATION 1 Stochastic Information

  6. Supervisory Control and Data Acquisition System (SCADA) Substation C3-3 Acceptance Test Procedure

    SciTech Connect (OSTI)

    ZAKRAJSEK, M.F.

    2000-10-17T23:59:59.000Z

    The purpose of this acceptance test procedure (ATP) is to demonstrate that the newly installed Supervisory Control and Data Acquisition (SCADA) computer system functions as intended by the design.

  7. Accepted Manuscript Studying the sensitivity of the pollutants concentrations caused by

    E-Print Network [OSTI]

    Dimov, Ivan

    -based sensitivity analysis, Sobol' bal sensitivity indices, Air pollution modeling, Multidimensional numericalAccepted Manuscript Studying the sensitivity of the pollutants concentrations caused by variations. Georgieva, S. Ivanovska, T. Ostromsky, Z. Zlatev, Studying the sensitivity of the pollutants concentrations

  8. Acceptance test report for the 241-SY-101 Flexible Receiver Gamma Detector System

    SciTech Connect (OSTI)

    Dowell, J.L.

    1995-02-17T23:59:59.000Z

    This Acceptance Test Report is for the 241-SY-101 Flexible Receiver Gamma Detector System. This test verified that the data logger and data converter for the gamma detector system functions as intended.

  9. E-Print Network 3.0 - acceptance criteria ntswac Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The bit noise must be 0 +- 4 bitsOK 1.9.2 ADC Noise at zero... conditions as test 1.9.2). Acceptance criteria: Check for a continuous response, no discontinuity...

  10. New cost structure approach in green buildings : cost-benefit analysis for widespread acceptance and long-term practice

    E-Print Network [OSTI]

    Wang, Zhiyong, S.M. Massachusetts Institute of Technology. Engineering Systems Division

    2013-01-01T23:59:59.000Z

    Although the concepts of sustainable building have been widely accepted in the market, there are unavoidable challenges toward widespread acceptance and long-term practice. Crossing green building development, there is ...

  11. Quantification of uncertainty in machining operations for on-machine acceptance.

    SciTech Connect (OSTI)

    Claudet, Andre A.; Tran, Hy D.; Su, Jiann-Chemg

    2008-09-01T23:59:59.000Z

    Manufactured parts are designed with acceptance tolerances, i.e. deviations from ideal design conditions, due to unavoidable errors in the manufacturing process. It is necessary to measure and evaluate the manufactured part, compared to the nominal design, to determine whether the part meets design specifications. The scope of this research project is dimensional acceptance of machined parts; specifically, parts machined using numerically controlled (NC, or also CNC for Computer Numerically Controlled) machines. In the design/build/accept cycle, the designer will specify both a nominal value, and an acceptable tolerance. As part of the typical design/build/accept business practice, it is required to verify that the part did meet acceptable values prior to acceptance. Manufacturing cost must include not only raw materials and added labor, but also the cost of ensuring conformance to specifications. Ensuring conformance is a substantial portion of the cost of manufacturing. In this project, the costs of measurements were approximately 50% of the cost of the machined part. In production, cost of measurement would be smaller, but still a substantial proportion of manufacturing cost. The results of this research project will point to a science-based approach to reducing the cost of ensuring conformance to specifications. The approach that we take is to determine, a priori, how well a CNC machine can manufacture a particular geometry from stock. Based on the knowledge of the manufacturing process, we are then able to decide features which need further measurements from features which can be accepted 'as is' from the CNC. By calibration of the machine tool, and establishing a machining accuracy ratio, we can validate the ability of CNC to fabricate to a particular level of tolerance. This will eliminate the costs of checking for conformance for relatively large tolerances.

  12. Acceptance test report for the Tank 241-C-106 in-tank imaging system

    SciTech Connect (OSTI)

    Pedersen, L.T.

    1998-05-22T23:59:59.000Z

    This document presents the results of Acceptance Testing of the 241-C-106 in-tank video camera imaging system. The purpose of this imaging system is to monitor the Project W-320 sluicing of Tank 241-C-106. The objective of acceptance testing of the 241-C-106 video camera system was to verify that all equipment and components function in accordance with procurement specification requirements and original equipment manufacturer`s (OEM) specifications. This document reports the results of the testing.

  13. Applicant Attitudes across the Recruitment Process: Time is of the Essence

    E-Print Network [OSTI]

    Swider, Brian

    2012-07-16T23:59:59.000Z

    . Finally, this study investigates the pattern of relationships between proximal predictors of job choice (organizational attraction and acceptance intentions) and applicant decisions to take or pass on a job offer. Participants in this study were 178...

  14. Treatment Acceptability of Social Skills Programs for Children with Autism: The Influence of Ethnicity, Age, and Problem Severity

    E-Print Network [OSTI]

    Fragioudakis, Maria

    2010-10-12T23:59:59.000Z

    regarding treatment acceptability issues. Frederick (2002) examined the treatment acceptability of behavioral interventions, structured teaching, social skills training, and medical interventions 22 commonly used with children with autism. The influence... of age of child and problem severity on acceptability ratings was also investigated in the study. Frederick (2002) found that psychosocial treatments were ranked more favorably than medical interventions. Furthermore, Frederick (2002) found...

  15. Acceptable Use of IT Resources Policy appendix B -revised 04-11.doc Page 1 of 2

    E-Print Network [OSTI]

    Qian, Ning

    not intended for you. Computing University computing resources include but are not limited to desktops, serversAcceptable Use of IT Resources Policy appendix B - revised 04-11.doc Page 1 of 2 Acceptable Use of IT Resources (Network and Computing) Policy Appendix B Examples of the Acceptable Use of IT Resources

  16. Application for admission to german university for international applicants with foreign academic qualifikation

    E-Print Network [OSTI]

    Heermann, Dieter W.

    Female Date of birth . . 19 (dd, mm, 19yy) Place of birth . Nationality/Nationalities . 3. Postal adress or English) of your certificates. Please submit these together with this application. Important: Some universities accept certificates in other languages besides German or English. (Enquire at the university

  17. Application for admission to German university for international applicants with foreign academic qualification

    E-Print Network [OSTI]

    KnĂĽpfer, Christian

    Female Date of birth . . 19 (dd, mm, 19yy) Place of birth . Nationality/Nationalities . 3. Postal address to substantiate the data below with certified copies and translations (German or English) of your certificates. Please submit these together with this application. Important: Some universities accept certificates

  18. IEEE COMMUNICATIONS SURVEYS & TUTORIALS, ACCEPTED FOR PUBLICATION 1 Reincarnation in the Ambiance: Devices and

    E-Print Network [OSTI]

    Langendoen, Koen

    : Devices and Networks with Energy Harvesting R. Venkatesha Prasad, Shruti Devasenapathy, Vijay S. Rao-sized and high-energy density batteries for longer operation time, which calls for improvement in battery technologies. An alternative is to harvest energy from the environment. An important aspect of energy

  19. TRU waste certification compliance requirements for acceptance of contact-handled wastes retrieved from storage to be shipped to the WIPP. Revision 1

    SciTech Connect (OSTI)

    Not Available

    1985-09-01T23:59:59.000Z

    Compliance requirements are presented for certifying that unclassified, contact-handled (CH) transuranic (TRU) solid defense wastes retrieved from storage at DOE sites meet the Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria (WAC). All applicable DOE orders must continue to be met. The compliance requirements for certified waste retrieved from certified storage are addressed in another document. The compliance requirements are divided into four sections, primarily determined by the general feature that the requirements address. These sections are General Requirements, Waste Container Requirements, Waste Form Requirements, and Waste Package Requirements. The waste package is the combination of waste container and waste. 2 refs., 1 fig.

  20. ENVIROCARE OF UTAH: EXPANDING WASTE ACCEPTANCE CRITERIA TO PROVIDE LOW-LEVEL AND MIXED WASTE DISPOSAL OPTIONS

    SciTech Connect (OSTI)

    Rogers, B.; Loveland, K.

    2003-02-27T23:59:59.000Z

    Envirocare of Utah operates a low-level radioactive waste disposal facility 80 miles west of Salt Lake City in Clive, Utah. Accepted waste types includes NORM, 11e2 byproduct material, Class A low-level waste, and mixed waste. Since 1988, Envirocare has offered disposal options for environmental restoration waste for both government and commercial remediation projects. Annual waste receipts exceed 12 million cubic feet. The waste acceptance criteria (WAC) for the Envirocare facility have significantly expanded to accommodate the changing needs of restoration projects and waste generators since its inception, including acceptable physical waste forms, radiological acceptance criteria, RCRA requirements and treatment capabilities, PCB acceptance, and liquids acceptance. Additionally, there are many packaging, transportation, and waste management options for waste streams acceptable at Envirocare. Many subcontracting vehicles are also available to waste generators for both government and commercial activities.

  1. Order acceptance and scheduling at a make-to-order system using revenue management

    E-Print Network [OSTI]

    Jalora, Anshu

    2006-10-30T23:59:59.000Z

    opportunity cost for processing the order. Discrete time formulations based on stochastic dynamic programming (SDP) approach are common in RM literature [14]. The way this approach is executed is as follows. Under the assumptions of a Poisson arrival process... is rejected and is 21 accepted is compared with the profits earned by processing the order at hand. If the comparison is in favor of the order, the order is accepted, otherwise it is rejected. Following this general approach, we develop SDP formulation for our...

  2. SOLAR ENERGY (conditionally accepted 1/2010) QUANTIFYING PV POWER OUTPUT VARIABILITY

    E-Print Network [OSTI]

    Perez, Richard R.

    SOLAR ENERGY (conditionally accepted 1/2010) QUANTIFYING PV POWER OUTPUT VARIABILITY Thomas E create major problems that will require major mitigation efforts. #12;SOLAR ENERGY (conditionally industry believe it could constrain the penetration of gridconnected PV. The U.S. Department of Energy

  3. Accepted Manuscript Title: Vasorelaxing Effects and Inhibition of Nitric Oxide in

    E-Print Network [OSTI]

    Boyer, Edmond

    (CORM-319) was rendered water-soluble by reacting the iron- carbonyl with hydrogen tetrafluoroborate. We that has been accepted for publication. As a service to our customers we are providing this early version of Chemistry, University of Sheffield, Sheffield, United Kingdom Corresponding authors: Roberto Motterlini

  4. Accepted for publication in Reliability Engineering and System Safety Analyzing the topological, electrical and reliability

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Accepted for publication in Reliability Engineering and System Safety Analyzing the topological, electrical and reliability characteristics of a power transmission system for identifying its critical of the system the reliability and electrical characteristics of its components. In each phase of the analysis: i

  5. Eligibility Acceptance into the full-time Advanced Standing MSW program at SU

    E-Print Network [OSTI]

    McConnell, Terry

    Eligibility Acceptance into the full-time Advanced Standing MSW program at SU School of Social of Social Welfare, members of the consortium are the MSW Programs at: University at Buffalo, University University. Unique opportunity for Advanced Standing MSW students interested in social work practice

  6. Accepted in Methods Mol Biol. 2010 3D-structural models of transmembrane proteins.

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    of transmembrane proteins is a major research area. Due to the lack of available 3D structures, automatic homology1 Accepted in Methods Mol Biol. 2010 3D-structural models of transmembrane proteins. Alexandre G proteins are macromolecules implicated in major biological process and diseases. Due to their specific

  7. SUBJECT: ACCEPTANCE OF THE FINAL SITE OBSERVATIONAL WORK PLAN FOR THE URANIUM MILL TAILINGS

    E-Print Network [OSTI]

    unknown authors

    2001-01-01T23:59:59.000Z

    and concludes that it is generally acceptable as DOE’s proposed strategy for compliance with the U.S. Environmental Protection Agency groundwater protection standards in 40 CFR Part 192. The staff’s detailed review of the Grand Junction SOWP is documented in the enclosed

  8. The Market Acceptance of Advanced Automotive Technologies (MA3T) Model

    E-Print Network [OSTI]

    vehicles (PHEV), extended-range electric vehicle (EREV), battery electric vehicles (BEV) and fuel cell Vehicles by 2015 Using MA3T Model." The 26th International Battery, Hybrid and Fuel Cell Electric Vehicle: Energy Environment Safety Security Vehicle Technologies T he Market Acceptance of Advanced Automotive

  9. Accepted for publicaton in The Astrophysical Journal NearInfrared Spectroscopy of Molecular

    E-Print Network [OSTI]

    Martini, Paul

    : reflection --- nebulae: individual (NGC 7023) #12; -- 3 -- 1. Introduction Near­infrared spectroscopic these authors apply to NGC 2023. We present near­infrared spectroscopy of H 2 emission in NGC 7023, a reflectionAccepted for publicaton in The Astrophysical Journal Near­Infrared Spectroscopy of Molecular

  10. Accepted Manuscript Abundances of presolar silicon carbide grains in primitive meteorites deter-

    E-Print Network [OSTI]

    Nittler, Larry R.

    Accepted Manuscript Abundances of presolar silicon carbide grains in primitive meteorites deter.R., Alexander, C.M., Orthous-Daunay, o-R., Franchi, I.A., Hoppe, P., Abundances of presolar silicon carbide of presolar silicon carbide grains in primitive meteorites determined by NanoSIMS Jemma Davidsona,1,* , Henner

  11. Accepted Manuscript Integrated models to study the impact of ELMs and disruptions on lithium in

    E-Print Network [OSTI]

    Harilal, S. S.

    geometrical effects on divertor erosion dynamics. Lithium expansion in divertor and SOL areas may potentiallyAccepted Manuscript Integrated models to study the impact of ELMs and disruptions on lithium the impact of ELMs and disruptions on lithium in the NSTX divertor, Journal of Nuclear Materials (2010), doi

  12. Accepted Manuscript Laboratory-based recording of holographic fine structure in x-ray absorption

    E-Print Network [OSTI]

    Korecki, PaweÂł

    be only performed using synchrotron radiation. Keywords: x-ray absorption, atomic structure, xAccepted Manuscript Laboratory-based recording of holographic fine structure in x-ray absorption structure in x-ray absorption anisotropy using polycapillary optics, Nucl. Instr. and Meth. in Phys. Res. B

  13. LSPE Qualification and Flight Acceptance T /V Test Su.m..mary and Thermal Design

    E-Print Network [OSTI]

    Rathbun, Julie A.

    5. 2 5. 3 5.4 5.5 5. 6 5.7 Nodal Description Thermal Resistances Solar Heating Lunar SurfaceLSPE Qualification and Flight Acceptance T /V Test Su.m..mary and Thermal Design Final Report NO Thermal Control Systems. The report is divided into three sections. The first section introduces

  14. Ultrathin, high-efficiency, broad-band, omni-acceptance, organic solar cells enhanced by

    E-Print Network [OSTI]

    : Three of central challenges in solar cells are high light coupling into solar cell, high light trappingUltrathin, high-efficiency, broad-band, omni- acceptance, organic solar cells enhanced by plasmonic and demonstration of a new ultra-thin high- efficiency organic solar cell (SC), termed "plasmonic cavity

  15. ACCEPTED TO IEEE TRANS. IMAGE PROCESSING. AUGUST 2007 1 EntropyControlled Quadratic Markov Measure

    E-Print Network [OSTI]

    Rivera, Mariano

    ACCEPTED TO IEEE TRANS. IMAGE PROCESSING. AUGUST 2007 1 Entropy­Controlled Quadratic Markov Measure analy- sis and image editing tasks. Its importance for low-level image processing stems from several, reduction in memory requirements or error reduction will have an important impact in many image processing

  16. Department of Energy (DOE) Policies on Accepting Other Federal Agency Funds For Interagency AcquisitionsF

    E-Print Network [OSTI]

    Department of Energy (DOE) Policies on Accepting Other Federal Agency Funds For Interagency. "Interagency acquisition," as used in this subpart, means a procedure by which an agency needing supplies.503 -- Determinations and Findings Requirements. (a) Each Economy Act order shall be supported by a Determination

  17. Accepted Manuscript Title: Advanced computational tools for pem fuel cell design

    E-Print Network [OSTI]

    Djilali, Ned

    Accepted Manuscript Title: Advanced computational tools for pem fuel cell design ­ Part 1.C. Sui, S. Kumar, N. Djilali, Advanced computational tools for pem fuel cell design ­ Part 1: Development TOOLS FOR PEM FUEL CELL DESIGN ­ Part 1: Development and Base Case Simulations P.C. Sui , S. Kumar and N

  18. Accepted for publication in Energy Policy (February 2009). Environmental climate instruments in Romania

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 Accepted for publication in Energy Policy (February 2009). Environmental climate instruments by some energy- intensive sectors, such as glass and cement. Keywords: tradable permits, Romania, 2003). As in most Eastern European countries, energy consumption in Romania has undergone a significant

  19. Acceptable knowledge document for INEEL stored transuranic waste -- Rocky Flats Plant waste. Revision 2

    SciTech Connect (OSTI)

    NONE

    1998-01-23T23:59:59.000Z

    This document and supporting documentation provide a consistent, defensible, and auditable record of acceptable knowledge for waste generated at the Rocky Flats Plant which is currently in the accessible storage inventory at the Idaho National Engineering and Environmental Laboratory. The inventory consists of transuranic (TRU) waste generated from 1972 through 1989. Regulations authorize waste generators and treatment, storage, and disposal facilities to use acceptable knowledge in appropriate circumstances to make hazardous waste determinations. Acceptable knowledge includes information relating to plant history, process operations, and waste management, in addition to waste-specific data generated prior to the effective date of the RCRA regulations. This document is organized to provide the reader a comprehensive presentation of the TRU waste inventory ranging from descriptions of the historical plant operations that generated and managed the waste to specific information about the composition of each waste group. Section 2 lists the requirements that dictate and direct TRU waste characterization and authorize the use of the acceptable knowledge approach. In addition to defining the TRU waste inventory, Section 3 summarizes the historical operations, waste management, characterization, and certification activities associated with the inventory. Sections 5.0 through 26.0 describe the waste groups in the inventory including waste generation, waste packaging, and waste characterization. This document includes an expanded discussion for each waste group of potential radionuclide contaminants, in addition to other physical properties and interferences that could potentially impact radioassay systems.

  20. Accepted Manuscript High occurrence of Hepatitis E virus in samples from wastewater treatment plants in

    E-Print Network [OSTI]

    Alvarez, Nadir

    Accepted Manuscript High occurrence of Hepatitis E virus in samples from wastewater treatment-Bianchi, D., Oppliger, A., High occurrence of Hepatitis E virus in samples from wastewater treatment plants MANUSCRIPT Highlights Hepatitis E virus (HEV) was searched in raw and treated wastewater in Switzerland

  1. ACCEPTED BY WATER ENVIRONMENT RESEARCH ODOR AND VOC REMOVAL FROM WASTEWATER TREATMENT PLANT

    E-Print Network [OSTI]

    ACCEPTED BY WATER ENVIRONMENT RESEARCH _______ ODOR AND VOC REMOVAL FROM WASTEWATER TREATMENT PLANT of biofilters for sequential removal of H2S and VOCs from wastewater treatment plant waste air. The biofilter volatile organic compounds (VOCs) and toxic air pollutants emitted from wastewater and solids handling

  2. Physical Education majors must be accepted to the College of Education Physical Education Teacher Education Program

    E-Print Network [OSTI]

    Milchberg, Howard

    Education Program Physical Education Admissions to College of Education Requirements 1. Completion of 45Physical Education majors must be accepted to the College of Education Physical Education Teacher of Education - Institution Code 5814). Praxis I information: http://www.ets.org/ 6. Compliance with College

  3. Accepted on August 29, 2008 for publication in the Journal of the Air & Waste Management Association

    E-Print Network [OSTI]

    Boyer, Edmond

    The accuracy of most air pollution modeling and the efficiency of emission standard reinforcement depend and might mislead the political discussions. The European MEET (Methodologies for Estimating air pollutant1 Accepted on August 29, 2008 for publication in the Journal of the Air & Waste Management

  4. IEEE TRANSACTIONS ON POWER SYSTEMS (ACCEPTED NOVEMBER 8, 2014) 1 Stochastic Reactive Power Management

    E-Print Network [OSTI]

    Giannakis, Georgios

    response, and electric vehicles. Advances in photovoltaic (PV) inverters offer new opportunitiesIEEE TRANSACTIONS ON POWER SYSTEMS (ACCEPTED NOVEMBER 8, 2014) 1 Stochastic Reactive Power are being challenged by reverse power flows and voltage fluctuations due to renewable generation, demand

  5. Acceptance test report for high pressure water jet system feed pump

    SciTech Connect (OSTI)

    Crystal, J.B.

    1996-03-12T23:59:59.000Z

    This document summarizes results of WHC-SD-SNF-ATP-016, Rev. 0 ``Acceptance Test Procedure High Pressure Water Jet System``, conducted on December 20, 1995 and December 22, 1995. This jet supplies water at 15,000 psi @ 15 gpm to nozzles to clean surfaces of empty fuel storage canisters.

  6. University Policy 00-1 Acceptable Use of Information Technology Resources

    E-Print Network [OSTI]

    Berdichevsky, Victor

    University Policy 00-1 Acceptable Use of Information Technology Resources 1.0 Purpose This policy, and other information technology resources at Wayne State University. 2.0 Guiding Principles 2 resources in a manner that recognizes both the rights and the obligations of academic freedom. 2.2 Wayne

  7. GENOMIC RESOURCES NOTE Genomic Resources Notes accepted 1 February 201331 March

    E-Print Network [OSTI]

    Rieseberg, Loren

    GENOMIC RESOURCES NOTE Genomic Resources Notes accepted 1 February 2013­31 March 2013 GENOMIC RESOURCES DEVELOPMENT CONSORTIUM,1 MATTHEW G. KING,2 SE´ BASTIEN RENAUT,3 LOREN H. RIESEBERG2,4 and HEATHER C. ROWE3 1 Molecular Ecology Resources Editorial Office, 6270 University Blvd, Vancouver, BC V6T 1Z4

  8. Submitted to Solar Energy (Nov. 2011) Complete article Accepted version (v1, Jul. 2012)

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Submitted to Solar Energy (Nov. 2011) Complete article Accepted version (v1, Jul. 2012) 1 THE SG2-00725987,version1-16Oct2012 Author manuscript, published in "Solar Energy 88, 10 (2012) Pages 3072-3083" DOI : 10.1016/j.solener.2012.07.018 #12;Submitted to Solar Energy (Nov. 2011) Complete article

  9. Buffer Tank Design for Acceptable Control Performance Audun Faanes and Sigurd Skogestad*

    E-Print Network [OSTI]

    Skogestad, Sigurd

    Buffer Tank Design for Acceptable Control Performance Audun Faanes and Sigurd Skogestad* Department provides a systematic approach for the design of buffer tanks. We consider mainly the case where the objective of the buffer tank is to dampen ("average out") the fast (i.e., high- frequency) disturbances

  10. Development of Performance Acceptance Test Guidelines for Large Commercial Parabolic Trough Solar Fields: Preprint

    SciTech Connect (OSTI)

    Kearney, D.; Mehos, M.

    2010-12-01T23:59:59.000Z

    Prior to commercial operation, large solar systems in utility-size power plants need to pass a performance acceptance test conducted by the EPC contractor or owners. In lieu of the present absence of engineering code developed for this purpose, NREL has undertaken the development of interim guidelines to provide recommendations for test procedures that can yield results of a high level of accuracy consistent with good engineering knowledge and practice. The fundamental differences between acceptance of a solar power plant and a conventional fossil-fired plant are the transient nature of the energy source and the necessity to utilize an analytical performance model in the acceptance process. These factors bring into play the need to establish methods to measure steady state performance, potential impacts of transient processes, comparison to performance model results, and the possible requirement to test, or model, multi-day performance within the scope of the acceptance test procedure. The power block and BOP are not within the boundaries of this guideline. The current guideline is restricted to the solar thermal performance of parabolic trough systems and has been critiqued by a broad range of stakeholders in CSP development and technology.

  11. Accepted for publication in Journal of the ACM Compositional Shape Analysis by means of

    E-Print Network [OSTI]

    O'Hearn, Peter

    Accepted for publication in Journal of the ACM Compositional Shape Analysis by means of Bi-Abduction. The analysis rests on a generalized form of abduction (inference of explanatory hypotheses) which we call bi-abduction. Bi-abduction displays abduction as a kind of inverse to the frame problem: it jointly infers anti

  12. Citizen acceptance of new fossil fuel infrastructure: Value theory and Canada's Northern Gateway Pipeline

    E-Print Network [OSTI]

    and Bakken shale oil) to the Texas Gulf coast for refinement. This study explores citizen acceptance), which would transport unconventional oil (bitumen) 1,172 km from Alberta's oil sands to British Columbia Pipeline system) which would transport oil from Canada and the northern U.S. (including oil sands bitumen

  13. 241-AZ-101 Waste Tank Color Video Camera System Shop Acceptance Test Report

    SciTech Connect (OSTI)

    WERRY, S.M.

    2000-03-23T23:59:59.000Z

    This report includes shop acceptance test results. The test was performed prior to installation at tank AZ-101. Both the camera system and camera purge system were originally sought and procured as a part of initial waste retrieval project W-151.

  14. Received 14 Jan 2013 | Accepted 22 Mar 2013 | Published 30 Apr 2013 Description and first application of a new technique

    E-Print Network [OSTI]

    Fajans, Joel

    -7300, USA. Correspondence and requests for materials should be addressed to J.S.H. (email: Jeffrey.nature.com/naturecommunications 1 & 2013 Macmillan Publishers Limited. All rights reserved. #12;T here are many compelling.) There have not yet been any direct14, free-fall or gravitational balance, tests of the gravitational

  15. AME 514 Applications of Combustion -Spring 2013 Assignment #5: "Due" Friday 5/3/13 but assignments will be accepted

    E-Print Network [OSTI]

    on mediatorless microbial fuel cells). M. V. Kök, G. Guner, S. Bagci, Oil Shale, Vol. 25, No. 2, pp. 217­225 (2008). Paper on in situ combustion of oil shale for oil production. Kocha, S. S. Yang, J. D., Yi, J. S. (2006

  16. Autonomic Materials for Smarter, Safer, Longer-Lasting Batteries (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)

    ScienceCinema (OSTI)

    Thackeray, Michael (Director, Center for Electrical Energy Storage); CEES Staff

    2011-11-02T23:59:59.000Z

    'Autonomic Materials for Smarter, Safer, Longer-Lasting Batteries' was submitted by the Center for Electrical Energy Storage (CEES) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. CEES, an EFRC directed by Michael Thackery at Argonne National Laboratory is a partnership of scientists from three institutions: ANL (lead), Northwestern University, and the University of Illinois at Urbana-Champaign. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges. The mission of the Center for Electrical Energy Storage is 'to acquire a fundamental understanding of interfacial phenomena controlling electrochemical processes that will enable dramatic improvements in the properties and performance of energy storage devices, notable Li ion batteries.' Research topics are: electrical energy storage, batteries, battery electrodes, electrolytes, adaptive materials, interfacial characterization, matter by design; novel materials synthesis, charge transport, and defect tolerant materials.

  17. The road to renewables : a case study of wind energy, local ownership and social acceptance at Samsř.

    E-Print Network [OSTI]

    Jakobsen, Ina

    2008-01-01T23:59:59.000Z

    ??The aim of this thesis is to investigate how local participation and local ownership enhances social acceptance of wind energy. In Norway many planned wind… (more)

  18. WIPP WAC REV. 5 applicability

    SciTech Connect (OSTI)

    Bisping, R.L. [U.S. Dept. of Energy, Carlsbad, NM (United States); Kelley, C.R.

    1996-08-01T23:59:59.000Z

    The Department of Energy (DOE) is preparing for disposal operations at the Waste Isolation Pilot Plant (WIPP) in 1998. WIPP is a deep geological repository designed for the safe and efficient disposal of transuranic (TRU) wastes. The Waste Acceptance Criteria (WAC) for WIPP were initially developed by a DOE steering committee in 1980. Revision 5 reflects the latest negotiations and permit requirements from the Environmental Protection Agency (EPA), the State of New Mexico Environment Department (NMED), and the Nuclear Regulatory Commission (NRC). The regulatory requirements are combined with the requirements derived from the WIPP safety analysis performed for disposal operations and the original criteria established for safe waste handling operations. The WIPP WAC provides a comprehensive overview of the requirements and basis for developing waste acceptance criteria to meet today`s rules and regulations for transportation and disposal of TRU wastes. The authors believe that it is a comprehensive criteria and a guidance manual for generator/storage sites who must characterize and certify TRU waste for disposal at WIPP. It also provides valuable insight to future projects that may develop their own waste acceptance criteria. The WIPP WAC presents the requirements from the following sources: 1) Resource Conservation and Recovery Act (RCRA) Permit Application; 2) Land Disposal No-migration Variance Petition; 3) 40 CFR 191 Draft Compliance Certification Application; 4) Certificate of Compliance (C of C) from the NRC for a Type B shipping container; 5) Federal Land Withdrawal Act for WIPP; WIPP Safety Analysis Report; 7) WIPP System Design Descriptions (SDDs). The WIPP WAC combines operations and nuclear safety requirements with transportation and hazardous waste regulatory requirements to provide a comprehensive set of criteria and requirements that ensure the safe disposal of TRU waste.

  19. Fuel cell power conditioning for electric power applications: a summary

    E-Print Network [OSTI]

    Tolbert, Leon M.

    Fuel cell power conditioning for electric power applications: a summary X. Yu, M.R. Starke, L.M. Tolbert and B. Ozpineci Abstract: Fuel cells are considered to be one of the most promising sources, multiple complications exist in fuel cell operation. Fuel cells cannot accept current in the reverse

  20. Variable Latency Turbo Codes for Wireless Multimedia Applications

    E-Print Network [OSTI]

    Valenti, Matthew C.

    Variable Latency Turbo Codes for Wireless Multimedia Applications Matthew C. Valenti and Brian D acceptable latency and Bit Error Rate BER or Frame Error Rate FER. In turbo coded systems a tradeo between an adaptive turbo coding strategy for wire- less multimedia communications that incor- porates a set

  1. Accepting Gifts of Building Materials Page 1 of 3 Virginia Polytechnic Institute and State University No. 12105 Rev.: 2

    E-Print Network [OSTI]

    Virginia Tech

    projects and wishing to take advantage of the benefits derived from the gifting of materials, has materials for university construction projects may be accepted if the donated materials meet university and state specifications for the project for which they are donated. THE ACCEPTANCE OF GIFTED MATERIALS

  2. Acceptable Knowledge Summary Report for Waste Stream: SR-T001-221F-HET/Drums

    SciTech Connect (OSTI)

    Lunsford, G.F.

    1999-06-14T23:59:59.000Z

    This report is fully responsive to the requirements of Section 4.0 Acceptable Knowledge from the WIPP Transuranic Waste Characterization Quality Assurance Plan, CAO-94-1010, and provides a sound, (and auditable) characterization that satisfies the WIPP criteria for Acceptable Knowledge.

  3. Hochmair, H. H., Zielstra, D., and Neis, P. (accepted). Assessing the Completeness of Bicycle Trails and Designated Lane Features in

    E-Print Network [OSTI]

    Hill, Jeffrey E.

    Hochmair, H. H., Zielstra, D., and Neis, P. (accepted). Assessing the Completeness of Bicycle of the National Academies. Hochmair, H. H. (accepted). Assessment of Bicycle Service Areas around Transit Stations Hochmair, H.H. (2012). Identification of Bicycle Demand from Online Routing Requests. In Jekel, T., A. Car

  4. Utility-Scale Power Tower Solar Systems: Performance Acceptance Test Guidelines

    SciTech Connect (OSTI)

    Kearney, D.

    2013-03-01T23:59:59.000Z

    The purpose of these Guidelines is to provide direction for conducting performance acceptance testing for large power tower solar systems that can yield results of a high level of accuracy consistent with good engineering knowledge and practice. The recommendations have been developed under a National Renewable Energy Laboratory (NREL) subcontract and reviewed by stakeholders representing concerned organizations and interests throughout the concentrating solar power (CSP) community. An earlier NREL report provided similar guidelines for parabolic trough systems. These Guidelines recommend certain methods, instrumentation, equipment operating requirements, and calculation methods. When tests are run in accordance with these Guidelines, we expect that the test results will yield a valid indication of the actual performance of the tested equipment. But these are only recommendations--to be carefully considered by the contractual parties involved in the Acceptance Tests--and we expect that modifications may be required to fit the particular characteristics of a specific project.

  5. Modeling of a Parabolic Trough Solar Field for Acceptance Testing: A Case Study

    SciTech Connect (OSTI)

    Wagner, M. J.; Mehos, M. S.; Kearney, D. W.; McMahan, A. C.

    2011-01-01T23:59:59.000Z

    As deployment of parabolic trough concentrating solar power (CSP) systems ramps up, the need for reliable and robust performance acceptance test guidelines for the solar field is also amplified. Project owners and/or EPC contractors often require extensive solar field performance testing as part of the plant commissioning process in order to ensure that actual solar field performance satisfies both technical specifications and performance guaranties between the involved parties. Performance test code work is currently underway at the National Renewable Energy Laboratory (NREL) in collaboration with the SolarPACES Task-I activity, and within the ASME PTC-52 committee. One important aspect of acceptance testing is the selection of a robust technology performance model. NREL1 has developed a detailed parabolic trough performance model within the SAM software tool. This model is capable of predicting solar field, sub-system, and component performance. It has further been modified for this work to support calculation at subhourly time steps. This paper presents the methodology and results of a case study comparing actual performance data for a parabolic trough solar field to the predicted results using the modified SAM trough model. Due to data limitations, the methodology is applied to a single collector loop, though it applies to larger subfields and entire solar fields. Special consideration is provided for the model formulation, improvements to the model formulation based on comparison with the collected data, and uncertainty associated with the measured data. Additionally, this paper identifies modeling considerations that are of particular importance in the solar field acceptance testing process and uses the model to provide preliminary recommendations regarding acceptable steady-state testing conditions at the single-loop level.

  6. The Department of Energy Respiratory Acceptance Program for Supplied-Air Suits

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-02-04T23:59:59.000Z

    The supplied-air suits that protect DOE contractor and federal employees from exposure to harmful atmospheres and radioactive contaminants are not included in the National Institute for Occupational Safety and Health (NIOSH) certification process for respiratory protective devices. Therefore, with the awareness and acknowledgement of NIOSH and the Occupational Safety and Health Administration (OSHA), the Department established a system for acceptance testing of supplied-air suits.

  7. Development of Waste Acceptance Criteria at 221-U Building: Initial Flow and Transport Scoping Calculations

    SciTech Connect (OSTI)

    Freedman, Vicky L.; Zhang, Z. F.; Keller, Jason M.; Chen, Yousu

    2007-05-30T23:59:59.000Z

    This report documents numerical flow and transport simulations performed that establish initial waste acceptance criteria for the potential waste streams that may be safely sequestered in the 221-U Building and similar canyon structures. Specifically, simulations were executed to identify the maximum loading of contaminant mass (without respect to volume) that can be emplaced within the 221-U Building with no more than 1 pCi/m2 of contaminant migrating outside the structure within a 1,000 year time period. The initial scoping simulations were executed in one dimension to assess important processes, and then two dimensions to establish waste acceptance criteria. Two monolithic conditions were assessed: (1) a grouted canyon monolith; and (2) a canyon monolith filled with sand, both assuming no cracks or fissures were present to cause preferential transport. A three-staged approach was taken to account for different processes that may impact the amount of contaminant that can be safely sequestered in canyon structure. In the first stage, flow and transport simulations established waste acceptance criteria based on a linear (Kd) isotherm approach. In the second stage, impacts on thermal loading were examined and the differences in waste acceptance criteria quantified. In the third stage of modeling, precipitation/dissolution reactions were considered on the release and transport of the contaminants, and the subsequent impact on the maximum contaminant loading. The reactive transport modeling is considered a demonstration of the reactive transport capability, and shows the importance of its use for future performance predictions once site-specific data have been obtained.

  8. Alternatives To the Use of Contractor's Quality Control Data For Acceptance and Payment Purposes

    E-Print Network [OSTI]

    Wani, Sujay Sudhir

    2012-07-16T23:59:59.000Z

    ) ........................................................................ 74 Figure B-1 Panel Member Responses to Workload Reducing Alternatives ......... 94 Figure B-2 Panel Member Responses to Alternatives Suggested as Improvement to CAT ....................................................................... 95... instances F and t tests detect a difference between two data sets when it does not exist. Operating Characteristics (OC) curves help determine the total number of samples needed to achieve a particular probability of acceptance. OC curves plot...

  9. Acceptance and resolution simulation studies for the dielectron spectrometer HADES at GSI

    E-Print Network [OSTI]

    R. Schicker; A. Brenschede; K. Garrow; H. Schoen; A. Balanda; H. Bokemeyer; J. Friese; W. Karig; P. Kienle; W. Koenig; W. Kuehn; F. Lefevre; V. Metag; G. Roche; P. Salabura; A. Schroeter; J. Stroth; H. Tsertos

    1996-05-21T23:59:59.000Z

    Design studies for a second generation Dilepton Spectrometer to be built at the SIS accelerator of GSI are presented. The basic design parameters of this system are specified and the different detector components for charged particle tracking and for lepton identification are described. The geometrical acceptance for lepton pairs is given. Results on single track momentum resolution and on lepton pair mass resolution are reported.

  10. Identification of items and activities important to waste form acceptance by Westinghouse GoCo sites

    SciTech Connect (OSTI)

    Plodinec, M.J.; Marra, S.L. [Westinghouse Savannah River Co., Aiken, SC (United States); Dempster, J. [West Valley Demonstration Project, NY (United States); Randklev, E.H. [Hanford Waste Vitrification Plant (United States)

    1993-10-12T23:59:59.000Z

    The Department of Energy has established specifications (Waste Acceptance Product Specifications for Vitrified High-Level Waste Forms, or WAPS) for canistered waste forms produced at Hanford, Savannah River, and West Valley. Compliance with these specifications requires that each waste form producer identify the items and activities which must be controlled to ensure compliance. As part of quality assurance oversight activities, reviewers have tried to compare the methodologies used by the waste form producers to identify items and activities important to waste form acceptance. Due to the lack of a documented comparison of the methods used by each producer, confusion has resulted over whether the methods being used are consistent. This confusion has been exacerbated by different systems of nomenclature used by each producer, and the different stages of development of each project. The waste form producers have met three times in the last two years, most recently on June 28, 1993, to exchange information on each producer`s program. These meetings have been sponsored by the Westinghouse GoCo HLW Vitrification Committee. This document is the result of this most recent exchange. It fills the need for a documented comparison of the methodologies used to identify items and activities important to waste form acceptance. In this document, the methodology being used by each waste form producer is summarized, and the degree of consistency among the waste form producers is determined.

  11. Acceptance of spent nuclear fuel in multiple element sealed canisters by the Federal Waste Management System

    SciTech Connect (OSTI)

    Not Available

    1990-03-01T23:59:59.000Z

    This report is one of a series of eight prepared by E.R. Johnson Associates, Inc. (JAI) under ORNL's contract with DOE's OCRWM Systems Integration Program and in support of the Annual Capacity Report (ACR) Issue Resolution Process. The report topics relate specifically to the list of high priority technical waste acceptance issues developed jointly by DOE and a utility-working group. JAI performed various analyses and studies on each topic to serve as starting points for further discussion and analysis leading eventually to finalizing the process by which DOE will accept spent fuel and waste into its waste management system. The eight reports are concerned with the conditions under which spent fuel and high level waste will be accepted in the following categories: (1) failed fuel; (2) consolidated fuel and associated structural parts; (3) non-fuel-assembly hardware; (4) fuel in metal storage casks; (5) fuel in multi-element sealed canisters; (6) inspection and testing requirements for wastes; (7) canister criteria; (8) spent fuel selection for delivery; and (9) defense and commercial high-level waste packages. 14 refs., 27 figs.

  12. Environmental Assessment of Urgent-Relief Acceptance of Foreign Research Reactor Spent Nuclear Fuel

    SciTech Connect (OSTI)

    Not Available

    1994-04-01T23:59:59.000Z

    The Department of Energy has completed the Environmental Assessment (EA) of Urgent-Relief Acceptance of Foreign Research Reactor Spent Nuclear Fuel and issued a Finding of No Significant Impact (FONSI) for the proposed action. The EA and FONSI are enclosed for your information. The Department has decided to accept a limited number of spent nuclear fuel elements (409 elements) containing uranium that was enriched in the United States from eight research reactors in Austria, Denmark, Germany, Greece, the Netherlands, Sweden, and Switzerland. This action is necessary to maintain the viability of a major US nuclear weapons nonproliferation program to limit or eliminate the use of highly enriched uranium in civil programs. The purpose of the EA is to maintain the cooperation of the foreign research reactor operators with the nonproliferation program while a more extensive Environmental Impact Statement (EIS) is prepared on a proposed broader policy involving the acceptance of up to 15,000 foreign research reactor spent fuel elements over a 10 to 15 year period. Based on an evaluation of transport by commercial container liner or chartered vessel, five eastern seaboard ports, and truck and train modes of transporting the spent fuel overland to the Savannah River Sits, the Department has concluded that no significant impact would result from any combination of port and made of transport. In addition, no significant impacts were found from interim storage of spent fuel at the Savannah River Site.

  13. UV absorption of CO2 for temperature diagnostics of hydrocarbon combustion applications

    E-Print Network [OSTI]

    Lee, Tonghun

    UV absorption of CO2 for temperature diagnostics of hydrocarbon combustion applications J temperature, CO2 is transparent in the ultraviolet (UV) at wavelengths longer than 205 nm; however, at temperatures above 1000 K the CO2 absorption cross-section becomes significant in the region between 200

  14. Renewal Application

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Renewal Individual Permit Renewal Application The Permit expires March 31, 2014 and existing permit conditions will be in effect until a new permit is issued. The Permittees...

  15. TRU (transuranic) waste certification compliance requirements for acceptance of newly generated contact-handled wastes to be shipped to the Waste Isolation Pilot Plant: Revision 2

    SciTech Connect (OSTI)

    Not Available

    1989-01-01T23:59:59.000Z

    Compliance requirements are presented for certifying that unclassified, newly generated (NG), contact-handled (CH) transuranic (TRU) solid wastes from defense programs meet the Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria (WAC). Where appropriate, transportation and interim storage requirements are incorporated; however, interim storage sites may have additional requirements consistent with these requirements. All applicable Department of Energy (DOE) orders must continue to be met. The compliance requirements for stored or buried waste are not addressed in this document. The compliance requirements are divided into four sections, primarily determined by the general feature that the requirements address. These sections are General Requirements, Waste Container Requirements, Waste Form Requirements, and Waste Package Requirements. The waste package is the combination of waste container and waste. 10 refs., 1 fig.

  16. TRU waste certification compliance requirements for acceptance of newly generated contact-handled wastes to be shipped to the WIPP. Revision 1

    SciTech Connect (OSTI)

    Not Available

    1985-09-01T23:59:59.000Z

    Compliance requirements are presented for certifying that unclassified, newly generated, contact-handled (CH) transuranic (TRU) solid wastes from defense programs meet the Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria (WAC). Where appropriate, transportation and interim storage requirements are incorporated, however, interim storage sites may have additional requirements consistent with these requirements. All applicable DOE orders must continue to be met. The compliance requirements for stored or buried waste are not addressed in this document. The compliance requirements are divided into four sections, primarily determined by the general feature that the requirements address. These sections are General Requirements, Waste Container Requirements, Waste Form Requirements, and Waste Package Requirements. The waste package is the combination of waste container and waste. 2 refs., 1 fig.

  17. Standard practice for qualification and acceptance of boron based metallic neutron absorbers for nuclear criticality control for dry cask storage systems and transportation packaging

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2007-01-01T23:59:59.000Z

    1.1 This practice provides procedures for qualification and acceptance of neutron absorber materials used to provide criticality control by absorbing thermal neutrons in systems designed for nuclear fuel storage, transportation, or both. 1.2 This practice is limited to neutron absorber materials consisting of metal alloys, metal matrix composites (MMCs), and cermets, clad or unclad, containing the neutron absorber boron-10 (10B). 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  18. ENTOMOLOGY O.B. Kovanci et al. (2005) Phytoparasitica 33(4):334-342 Effects of Application Rate and Interval on the Efficacy of

    E-Print Network [OSTI]

    ENTOMOLOGY O.B. Kovanci et al. (2005) Phytoparasitica 33(4):334-342 Effects of Application Rate sustain themselves in apples alone in NC, Received Nov. 22, 2004; accepted March 12, 2005; http://www.phytoparasitica

  19. Gulf Power- Solar PV Program

    Broader source: Energy.gov [DOE]

    '''''All funding has currently been reserved and new applications are no longer being accepted. See Gulf Power's [http://www.gulfpower.com/renewable/solarElectricity.asp Solar PV] web site for more...

  20. Southwest Gas Corporation- Smarter Greener Better Solar Water Heating Program (Arizona)

    Broader source: Energy.gov [DOE]

    '''''Note: Effective July 15, 2013, Southwest Gas is no longer accepting applications for the current program year. Systems installed during the current program year will not be eligible for a...

  1. What determines the acceptability of genetically modified food that can improve human nutrition?

    SciTech Connect (OSTI)

    Purchase, Iain F.H. [University of Manchester, Oxford Road, Manchester M13 9PT (United Kingdom)]. E-mail: ifhp@chadzombe.u-net.com

    2005-09-01T23:59:59.000Z

    It has been predicted that by 2025 there will be an annual shortfall of cereals for feeding the human population of 68.5 million tonnes. One possible solution is the use of genetically modified (GM) crops, which are already grown extensively (59 million ha of GM crops were planted in 2002) in the USA, South America, Africa and China. Nevertheless, there is considerable disagreement about the advisability of using such crops, particularly in Europe. Obviously, the safety of the food derived from the GM crops is a primary consideration. Safety assessment relies on establishing that the food is substantially equivalent to its non-GM counterpart and specific testing for allergenicity of proteins and toxicity of metabolites and the whole food. There appears to be international agreement on the principles of safety assessment. Safety to the environment is equally important, but will not be covered in this presentation. The public's perception of the risk of new technology is critical to its acceptance. Perception of risk, in turn, depends on the credibility of the source of the information and trust in the regulatory process. In many countries, the public appears to have lost its trust in the scientists and government dealing with GM food, making the acceptability of GM crops uncertain. Of equal importance are the socio-economic factors that impinge on the viability of GM produce. These include intellectual property protection, trade liberalisation (through subsidy and tariff barriers in developed countries) and the intensity of bio safety regulations. The socio-economic interests of developed and developing countries may diverge and may even be contradictory in any one country. Acceptance of GM crops will thus depend on detailed issues surrounding particular crops and economies.

  2. Pipe supports and anchors - LMFBR applications

    SciTech Connect (OSTI)

    Anderson, M.J.

    1983-06-01T23:59:59.000Z

    Pipe design and support design can not be treated as separate disciplines. A coordinated design approach is required if LMFBR pipe system adequacy is to be achieved at a reasonable cost. It is particularly important that system designers understand and consider those factors which influence support train flexibility and thus the pipe system dynamic stress levels. The system approach must not stop with the design phase but should continue thru the erection and acceptance test procedures. The factors that should be considered in the design of LMFBR pipe supports and anchors are described. The various pipe support train elements are described together with guidance on analysis, design and application aspects. Post erection acceptance and verification test procedures are then discussed.

  3. Child Care Center APPLICATION

    E-Print Network [OSTI]

    Harms, Kyle E.

    to LSU.) Home phone:_____________________Work phone:_____________________________Cell phone submit guardianship documentation acceptable to LSU.) Home phone:______________________Work phone:_____________________________Cell phone:________________________ Address

  4. Project W-320 acceptance test report for AY-farm electrical distribution

    SciTech Connect (OSTI)

    Bevins, R.R.

    1998-04-02T23:59:59.000Z

    This Acceptance Test Procedure (ATP) has been prepared to demonstrate that the AY-Farm Electrical Distribution System functions as required by the design criteria. This test is divided into three parts to support the planned construction schedule; Section 8 tests Mini-Power Pane AY102-PPI and the EES; Section 9 tests the SSS support systems; Section 10 tests the SSS and the Multi-Pak Group Control Panel. This test does not include the operation of end-use components (loads) supplied from the distribution system. Tests of the end-use components (loads) will be performed by other W-320 ATPs.

  5. Sterile acceptable milk (SAM): a major energy-saving technology. Summary and recommendations

    SciTech Connect (OSTI)

    Not Available

    1980-10-01T23:59:59.000Z

    Milk consumption, its nutritial values, and its sanitation and preservation are reviewed. The production of sterile milk as an alternative to pasteurized milk is discussed. A technical assessment of the feasibility of introducing sterile acceptable milk (SAM) into the American economy and the energy and economic impacts that would result are summarized. Research has demonstrated that milk sterilized as a free falling film in a saturated steam environment producea product which consumers would find comparable to existing pasteurized milk. This bulletin provides an overview of the research project and presents highlights of the analysis. (MCW)

  6. Sterile acceptable milk (SAM): a major energy-saving technology. Summary and recommendations

    SciTech Connect (OSTI)

    Not Available

    1980-10-01T23:59:59.000Z

    Milk consumption, its nutritive values, and its sanitation and preservation are reviewed. The production of sterile milk as an alternative to pasteurized milk is discussed. A technical assessment of the feasibility of introducing sterile acceptable milk (SAM) into the American economy and the energy and economic impacts that would result are summarized. Research has demonstrated that milk sterilized as a free falling film in a saturated steam environment produced a product which consumers would find comparable to existing pasteurized milk. This bulletin provides an overview of the research project and presents highlights of the analysis. (MCW)

  7. Waste acceptance criteria for the Waste Isolation Pilot Plant. Revision 4

    SciTech Connect (OSTI)

    Not Available

    1991-12-01T23:59:59.000Z

    This Revision 4 of the Waste Acceptance Criteria (WAC), WIPP-DOE-069, identifies and consolidates existing criteria and requirements which regulate the safe handling and preparation of Transuranic (TRU) waste packages for transportation to and emplacement in the Waste Isolation Pilot Plant (WIPP). This consolidation does not invalidate any existing certification of TRU waste to the WIPP Operations and Safety Criteria (Revision 3 of WIPP-DOE--069) and/or Transportation: Waste Package Requirements (TRUPACT-II Safety Analysis Report for Packaging [SARP]). Those documents being consolidated, including Revision 3 of the WAC, currently support the Test Phase.

  8. E-Print Network 3.0 - acceptance model applied Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    applications for a PhD position. The project involves the computational modeling... simulation and model optimization algorithms; (2) to apply concepts from the theory of...

  9. Received 19 Dec 2013 | Accepted 14 May 2014 | Published 17 Jun 2014 Encapsulation kinetics and dynamics of

    E-Print Network [OSTI]

    Wang, Wei Hua

    ARTICLE Received 19 Dec 2013 | Accepted 14 May 2014 | Published 17 Jun 2014 Encapsulation kinetics is a potentially important constituent in the solar system. In contrast to the well-established relation between

  10. Interpersonal traits and the technology acceptance model: applying the interpersonal circumplex model as a nomological net for understanding user perceptions within human-to-computer interaction

    E-Print Network [OSTI]

    Brown, Houghton Gregory

    2009-05-15T23:59:59.000Z

    This study examines the effects that individual personality traits have on technology acceptance. Previous research on technology acceptance focuses primarily on exogenous variables such as trustor’s perceptions, attitudes, computer anxiety...

  11. Evaluation of ISDP Batch 2 Qualification Compliance to 512-S, DWPF, Tank Farm, and Saltstone Waste Acceptance Criteria

    SciTech Connect (OSTI)

    Shafer, A.

    2010-05-05T23:59:59.000Z

    The purpose of this report is to document the acceptability of the second macrobatch (Salt Batch 2) of Tank 49H waste to H Tank Farm, DWPF, and Saltstone for operation of the Interim Salt Disposition Project (ISDP). Tank 49 feed meets the Waste Acceptance Criteria (WAC) requirements specified by References 11, 12, and 13. Salt Batch 2 material is qualified and ready to be processed through ARP/MCU to the final disposal facilities.

  12. Acceptance of fluorescence detectors and its implication in energy spectrum inference at the highest energies

    E-Print Network [OSTI]

    Vitor de Souza; Gustavo Medina-Tanco; Jeferson A. Ortiz

    2005-09-20T23:59:59.000Z

    Along the years HiRes and AGASA experiments have explored the fluorescence and the ground array experimental techniques to measure extensive air showers, being both essential to investigate the ultra-high energy cosmic rays. However, such Collaborations have published contradictory energy spectra for energies above the GZK cut-off. In this article, we investigate the acceptance of fluorescence telescopes to different primary particles at the highest energies. Using CORSIKA and CONEX shower simulations without and with the new pre-showering scheme, which allows photons to interact in the Earth magnetic field, we estimate the aperture of the HiRes-I telescope for gammas, iron nuclei and protons primaries as a function of the number of simulated events and primary energy. We also investigate the possibility that systematic differences in shower development for hadrons and gammas could mask or distort vital features of the cosmic ray energy spectrum at energies above the photo-pion production threshold. The impact of these effects on the true acceptance of a fluorescence detector is analyzed in the context of top-down production models.

  13. Supporting Infrastructure and Acceptability Issues for Materials Used in New Generation Vehicles

    SciTech Connect (OSTI)

    Das, S.; Curlee, T.R.; Jones, D.W.; Leiby, P.E.; Rubin, J.D.; Schexnayder, S.M.; Vogt, D.P.; Wolfe, A.K.

    1999-03-01T23:59:59.000Z

    To achieve its goal of producing vehicles that use two thirds less fuel than current vehicles, the Partnership of a New Generation of Vehicles (PNGV) is designing vehicles that will use lightweight materials in place of heavier materials used in current vehicles. using new materials in automobiles will require the development of a supporting infrastructure to produce both the substitute materials and the components of the substitute materials, as well as the automotive parts constructed from the new materials. This report documents a set of analyses that attempt to identify potential barriers--economic, infrastructure, and public acceptance barriers--to the materials substitution in New Generation Vehicles. The analyses rely on hypothetical vehicle market penetration scenarios and material composition. The approach is comprehensive, examining issues ranging from materials availability to their eventual disposition and its effect on the automobile recycling industry, and from supporting industries' capacity to the public acceptability of these vehicles. The analyses focus on two likely substitute materials, aluminum and glass-reinforced polymer composites.

  14. Multi Canister Overpack (MCO) Combustible Gas Management Leak Test Acceptance Criteria (OCRWM)

    SciTech Connect (OSTI)

    SHERRELL, D.L.

    2000-10-10T23:59:59.000Z

    The purpose of this document is to support the Spent Nuclear Fuel Project's combustible gas management strategy while avoiding the need to impose any requirements for oxygen free atmospheres within storage tubes that contain multi-canister overpacks (MCO). In order to avoid inerting requirements it is necessary to establish and confirm leak test acceptance criteria for mechanically sealed and weld sealed MCOs that are adequte to ensure that, in the unlikely event the leak test results for any MCO were to approach either of those criteria, it could still be handled and stored in stagnant air without compromising the SNF Project's overall strategy to prevent accumulation of combustible gas mixtures within MCOs or within their surroundings. To support that strategy, this document: (1) establishes combustible gas management functions and minimum functional requirements for the MCO's mechanical seals and closure weld(s); (2) establishes a maximum practical value for the minimum required initial MCO inert backfill gas pressure; and (3) based on items 1 and 2, establishes and confirms leak test acceptance criteria for the MCO's mechanical seal and final closure weld(s).

  15. Introduction to applications and industries for Microelectromechanical Systems (MEMS).

    SciTech Connect (OSTI)

    Walraven, Jeremy Allen

    2003-07-01T23:59:59.000Z

    Microelectromechanical Systems (MEMS) have gained acceptance as viable products for many commercial and government applications. MEMS are currently being used as displays for digital projection systems, sensors for airbag deployment systems, inkjet print head systems, and optical routers. This paper will discuss current and future MEMS applications. What are MEMS? MEMS are typically defined as microscopic devices designed, processed, and used to interact or produce changes within a local environment. A mechanical, electrical, or chemical stimulus can be used to create a mechanical, electrical, or chemical response in a local environment. These smaller, more sophisticated devices that think, act, sense, and communicate are replacing their bulk counterparts in many traditional applications.

  16. Technology certification and technology acceptance: Promoting interstate cooperation and market development for innovative technologies

    SciTech Connect (OSTI)

    Brockbank, B.R.

    1995-03-01T23:59:59.000Z

    In the past two years, public and private efforts to promote development and deployment of innovative environmental technologies have shifted from the analysis of barriers to the implementation of a variety of initiatives aimed at surmounting those barriers. Particular attention has been directed at (1) streamlining fragmented technology acceptance processes within and among the states, and (2) alleviating disincentives, created by inadequate or unverified technology cost and performance data, for users and regulators to choose innovative technologies. Market fragmentation currently imposes significant cost burdens on technology developers and inhibits the investment of private capital in environmental technology companies. Among the responses to these problems are state and federal technology certification/validation programs, efforts to standardize cost/performance data reporting, and initiatives aimed at promoting interstate cooperation in technology testing and evaluation. This paper reviews the current status of these initiatives, identifies critical challenges to their success, and recommends strategies for addressing those challenges.

  17. Acceptance Performance Test Guideline for Utility Scale Parabolic Trough and Other CSP Solar Thermal Systems: Preprint

    SciTech Connect (OSTI)

    Mehos, M. S.; Wagner, M. J.; Kearney, D. W.

    2011-08-01T23:59:59.000Z

    Prior to commercial operation, large solar systems in utility-size power plants need to pass a performance acceptance test conducted by the engineering, procurement, and construction (EPC) contractor or owners. In lieu of the present absence of ASME or other international test codes developed for this purpose, the National Renewable Energy Laboratory has undertaken the development of interim guidelines to provide recommendations for test procedures that can yield results of a high level of accuracy consistent with good engineering knowledge and practice. Progress on interim guidelines was presented at SolarPACES 2010. Significant additions and modifications were made to the guidelines since that time, resulting in a final report published by NREL in April 2011. This paper summarizes those changes, which emphasize criteria for assuring thermal equilibrium and steady state conditions within the solar field.

  18. Utility-Scale Parabolic Trough Solar Systems: Performance Acceptance Test Guidelines, April 2009 - December 2010

    SciTech Connect (OSTI)

    Kearney, D.

    2011-05-01T23:59:59.000Z

    Prior to commercial operation, large solar systems in utility-size power plants need to pass a performance acceptance test conducted by the engineering, procurement, and construction (EPC) contractor or owners. In lieu of the present absence of ASME or other international test codes developed for this purpose, the National Renewable Energy Laboratory has undertaken the development of interim guidelines to provide recommendations for test procedures that can yield results of a high level of accuracy consistent with good engineering knowledge and practice. The Guidelines contained here are specifically written for parabolic trough collector systems with a heat-transport system using a high-temperature synthetic oil, but the basic principles are relevant to other CSP systems.

  19. Enhancing technology acceptance: The role of the subsurface contaminants focus area external integration team

    SciTech Connect (OSTI)

    Kirwan-Taylor, H.; McCabe, G.H. [Battelle Seattle Research Center, WA (United States); Lesperance, A. [Pacific Northwest National Lab., Richland, WA (United States); Kauffman, J.; Serie, P.; Dressen, L. [EnvironIssues (United States)

    1996-09-01T23:59:59.000Z

    The US DOE is developing and deploying innovative technologies for cleaning up its contaminated facilities using a market-oriented approach. This report describes the activities of the Subsurface Contaminant Focus Area`s (SCFA) External Integration Team (EIT) in supporting DOE`s technology development program. The SCFA program for technology development is market-oriented, driven by the needs of end users. The purpose of EIT is to understand the technology needs of the DOE sites and identify technology acceptance criteria from users and other stakeholders to enhance deployment of innovative technologies. Stakeholders include regulators, technology users, Native Americans, and environmental and other interest groups. The success of this national program requires close coordination and communication among technology developers and stakeholders to work through all of the various phases of planning and implementation. Staff involved must be willing to commit significant amounts of time to extended discussions with the various stakeholders.

  20. EVALUATION OF ARG-1 SAMPLES PREPARED BY CESIUM CARBONATE DISSOLUTION DURING THE ISOLOK SME ACCEPTABILITY TESTING

    SciTech Connect (OSTI)

    Edwards, T.; Hera, K.; Coleman, C.

    2011-12-05T23:59:59.000Z

    Evaluation of Defense Waste Processing Facility (DWPF) Chemical Process Cell (CPC) cycle time identified several opportunities to improve the CPC processing time. The Mechanical Systems & Custom Equipment Development (MS&CED) Section of the Savannah River National Laboratory (SRNL) recently completed the evaluation of one of these opportunities - the possibility of using an Isolok sampling valve as an alternative to the Hydragard valve for taking DWPF process samples at the Slurry Mix Evaporator (SME). The use of an Isolok for SME sampling has the potential to improve operability, reduce maintenance time, and decrease CPC cycle time. The SME acceptability testing for the Isolok was requested in Task Technical Request (TTR) HLW-DWPF-TTR-2010-0036 and was conducted as outlined in Task Technical and Quality Assurance Plan (TTQAP) SRNLRP-2011-00145. RW-0333P QA requirements applied to the task, and the results from the investigation were documented in SRNL-STI-2011-00693. Measurement of the chemical composition of study samples was a critical component of the SME acceptability testing of the Isolok. A sampling and analytical plan supported the investigation with the analytical plan directing that the study samples be prepared by a cesium carbonate (Cs{sub 2}CO{sub 3}) fusion dissolution method and analyzed by Inductively Coupled Plasma - Optical Emission Spectroscopy (ICP-OES). The use of the cesium carbonate preparation method for the Isolok testing provided an opportunity for an additional assessment of this dissolution method, which is being investigated as a potential replacement for the two methods (i.e., sodium peroxide fusion and mixed acid dissolution) that have been used at the DWPF for the analysis of SME samples. Earlier testing of the Cs{sub 2}CO{sub 3} method yielded promising results which led to a TTR from Savannah River Remediation, LLC (SRR) to SRNL for additional support and an associated TTQAP to direct the SRNL efforts. A technical report resulting from this work was issued that recommended that the mixed acid method be replaced by the Cs{sub 2}CO{sub 3} method for the measurement of magnesium (Mg), sodium (Na), and zirconium (Zr) with additional testing of the method by DWPF Laboratory being needed before further implementation of the Cs{sub 2}CO{sub 3} method at that laboratory. While the SME acceptability testing of the Isolok does not address any of the open issues remaining after the publication of the recommendation for the replacement of the mixed acid method by the Cs{sub 2}CO{sub 3} method (since those issues are to be addressed by the DWPF Laboratory), the Cs{sub 2}CO{sub 3} testing associated with the Isolok testing does provide additional insight into the performance of the method as conducted by SRNL. The performance is to be investigated by looking to the composition measurement data generated by the samples of a standard glass, the Analytical Reference Glass - 1 (ARG-1), that were prepared by the Cs{sub 2}CO{sub 3} method and included in the SME acceptability testing of the Isolok. The measurements of these samples were presented as part of the study results, but no statistical analysis of these measurements was conducted as part of those results. It is the purpose of this report to provide that analysis, which was supported using JMP Version 7.0.2.

  1. Preliminary Assessment of the Hanford Tank Waste Feed Acceptance and Product Qualification Programs

    SciTech Connect (OSTI)

    Herman, C. C.; Adamson, Duane J.; Herman, D. T.; Peeler, David K.; Poirier, Micheal R.; Reboul, S. H.; Stone, M. E.; Peterson, Reid A.; Chun, Jaehun; Fort, James A.; Vienna, John D.; Wells, Beric E.

    2013-04-01T23:59:59.000Z

    The U.S. Department of Energy Office of Environmental Management (EM) is engaging the national laboratories to provide the scientific and technological rigor to support EM program and project planning, technology development and deployment, project execution, and assessment of program outcomes. As an early demonstration of this new responsibility, Savannah River National Laboratory (SRNL) and Pacific Northwest National Laboratory (PNNL) have been chartered to implement a science and technology program addressing Hanford Tank waste feed acceptance and product qualification. As a first step, the laboratories examined the technical risks and uncertainties associated with the planned waste feed acceptance and qualification testing for Hanford tank wastes. Science and technology gaps were identified for work associated with 1) feed criteria development with emphasis on identifying the feed properties and the process requirements, 2) the Tank Waste Treatment and Immobilization Plant (WTP) process qualification program, and 3) the WTP HLW glass product qualification program. Opportunities for streamlining the accetpance and qualification programs were also considered in the gap assessment. Technical approaches to address the science and technology gaps and/or implement the opportunities were identified. These approaches will be further refined and developed as strong integrated teams of researchers from national laboratories, contractors, industry, and academia are brought together to provide the best science and technology solutions. Pursuing the identified approaches will have immediate and long-term benefits to DOE in reducing risks and uncertainties associated with tank waste removal and preparation, transfers from the tank farm to the WTP, processing within the WTP Pretreatment Facility, and in producing qualified HLW glass products. Additionally, implementation of the identified opportunities provides the potential for long-term cost savings given the anticipated facility life of WTP.

  2. Energy dependence of acceptance-corrected dielectron excess mass spectrum at mid-rapidity in Au+Au collisions at $\\sqrt{s_{NN}} = 19.6$ and 200 GeV

    E-Print Network [OSTI]

    STAR Collaboration; L. Adamczyk; J. K. Adkins; G. Agakishiev; M. M. Aggarwal; Z. Ahammed; I. Alekseev; J. Alford; A. Aparin; D. Arkhipkin; E. C. Aschenauer; G. S. Averichev; A. Banerjee; R. Bellwied; A. Bhasin; A. K. Bhati; P. Bhattarai; J. Bielcik; J. Bielcikova; L. C. Bland; I. G. Bordyuzhin; J. Bouchet; A. V. Brandin; I. Bunzarov; T. P. Burton; J. Butterworth; H. Caines; M. Calder'on de la Barca S'anchez; J. M. campbell; D. Cebra; M. C. Cervantes; I. Chakaberia; P. Chaloupka; Z. Chang; S. Chattopadhyay; J. H. Chen; X. Chen; J. Cheng; M. Cherney; W. Christie; M. J. M. Codrington; G. Contin; H. J. Crawford; S. Das; L. C. De Silva; R. R. Debbe; T. G. Dedovich; J. Deng; A. A. Derevschikov; B. di Ruzza; L. Didenko; C. Dilks; X. Dong; J. L. Drachenberg; J. E. Draper; C. M. Du; L. E. Dunkelberger; J. C. Dunlop; L. G. Efimov; J. Engelage; G. Eppley; R. Esha; O. Evdokimov; O. Eyser; R. Fatemi; S. Fazio; P. Federic; J. Fedorisin; Feng; P. Filip; Y. Fisyak; C. E. Flores; L. Fulek; C. A. Gagliardi; D. Garand; F. Geurts; A. Gibson; M. Girard; L. Greiner; D. Grosnick; D. S. Gunarathne; Y. Guo; S. Gupta; A. Gupta; W. Guryn; A. Hamad; A. Hamed; R. Haque; J. W. Harris; L. He; S. Heppelmann; A. Hirsch; G. W. Hoffmann; D. J. Hofman; S. Horvat; H. Z. Huang; X. Huang; B. Huang; P. Huck; T. J. Humanic; G. Igo; W. W. Jacobs; H. Jang; K. Jiang; E. G. Judd; S. Kabana; D. Kalinkin; K. Kang; K. Kauder; H. W. Ke; D. Keane; A. Kechechyan; Z. H. Khan; D. P. Kikola; I. Kisel; A. Kisiel; S. R. Klein; D. D. Koetke; T. Kollegger; L. K. Kosarzewski; L. Kotchenda; A. F. Kraishan; P. Kravtsov; K. Krueger; I. Kulakov; L. Kumar; R. A. Kycia; M. A. C. Lamont; J. M. Landgraf; K. D. Landry; J. Lauret; A. Lebedev; R. Lednicky; J. H. Lee; X. Li; X. Li; W. Li; Z. M. Li; Y. Li; C. Li; M. A. Lisa; F. Liu; T. Ljubicic; W. J. Llope; M. Lomnitz; R. S. Longacre; X. Luo; L. Ma; R. Ma; G. L. Ma; Y. G. Ma; N. Magdy; R. Majka; A. Manion; S. Margetis; C. Markert; H. Masui; H. S. Matis; D. McDonald; K. Meehan; N. G. Minaev; S. Mioduszewski; B. Mohanty; M. M. Mondal; D. A. Morozov; M. K. Mustafa; B. K. Nandi; Md. Nasim; T. K. Nayak; G. Nigmatkulov; L. V. Nogach; S. Y. Noh; J. Novak; S. B. Nurushev; G. Odyniec; A. Ogawa; K. Oh; V. Okorokov; D. L. Olvitt Jr.; B. S. Page; Y. X. Pan; Y. Pandit; Y. Panebratsev; T. Pawlak; B. Pawlik; H. Pei; C. Perkins; A. Peterson; P. Pile; M. Planinic; J. Pluta; N. Poljak; K. Poniatowska; J. Porter; M. Posik; A. M. Poskanzer; N. K. Pruthi; J. Putschke; H. Qiu; A. Quintero; S. Ramachandran; R. Raniwala; S. Raniwala; R. L. Ray; H. G. Ritter; J. B. Roberts; O. V. Rogachevskiy; J. L. Romero; A. Roy; L. Ruan; J. Rusnak; O. Rusnakova; N. R. Sahoo; P. K. Sahu; I. Sakrejda; S. Salur; A. Sandacz; J. Sandweiss; A. Sarkar; J. Schambach; R. P. Scharenberg; A. M. Schmah; W. B. Schmidke; N. Schmitz; J. Seger; P. Seyboth; N. Shah; E. Shahaliev; P. V. Shanmuganathan; M. Shao; M. K. Sharma; B. Sharma; W. Q. Shen; S. S. Shi; Q. Y. Shou; E. P. Sichtermann; R. Sikora; M. Simko; M. J. Skoby; N. Smirnov; D. Smirnov; D. Solanki; L. Song; P. Sorensen; H. M. Spinka; B. Srivastava; T. D. S. Stanislaus; R. Stock; M. Strikhanov; B. Stringfellow; M. Sumbera; B. J. Summa; Y. Sun; Z. Sun; X. M. Sun; X. Sun; B. Surrow; D. N. Svirida; M. A. Szelezniak; J. Takahashi; A. H. Tang; Z. Tang; T. Tarnowsky; A. N. Tawfik; J. H. Thomas; A. R. Timmins; D. Tlusty; M. Tokarev; S. Trentalange; R. E. Tribble; P. Tribedy; S. K. Tripathy; B. A. Trzeciak; O. D. Tsai; T. Ullrich; D. G. Underwood; I. Upsal; G. Van Buren; G. van Nieuwenhuizen; M. Vandenbroucke; R. Varma; A. N. Vasiliev; R. Vertesi; F. Videbćk; Y. P. Viyogi; S. Vokal; S. A. Voloshin; A. Vossen; Y. Wang; F. Wang; H. Wang; J. S. Wang; G. Wang; Y. Wang; J. C. Webb; G. Webb; L. Wen; G. D. Westfall; H. Wieman; S. W. Wissink; R. Witt; Y. F. Wu; Z. Xiao; W. Xie; K. Xin; Z. Xu; Q. H. Xu; N. Xu; H. Xu; Y. F. Xu; Y. Yang; C. Yang; S. Yang; Q. Yang; Y. Yang; Z. Ye; P. Yepes; L. Yi; K. Yip; I. -K. Yoo; N. Yu; H. Zbroszczyk; W. Zha; J. B. Zhang; X. P. Zhang; S. Zhang; J. Zhang; Z. Zhang; Y. Zhang; J. L. Zhang; F. Zhao; J. Zhao; C. Zhong; L. Zhou; X. Zhu; Y. Zoulkarneeva; M. Zyzak

    2015-01-21T23:59:59.000Z

    The acceptance-corrected dielectron excess mass spectra, where the known hadronic sources have been subtracted from the inclusive dielectron mass spectra, are reported for the first time at mid-rapidity $|y_{ee}|<1$ in minimum-bias Au+Au collisions at $\\sqrt{s_{NN}}$ = 19.6 and 200 GeV. The excess mass spectra are consistently described by a model calculation with a broadened $\\rho$ spectral function for $M_{ee}<1.1$ GeV/$c^{2}$. The integrated dielectron excess yield at $\\sqrt{s_{NN}}$ = 19.6 GeV for $0.4longer than those in peripheral collisions and at lower energies.

  3. Energy dependence of acceptance-corrected dielectron excess mass spectrum at mid-rapidity in Au+Au collisions at $\\sqrt{s_{NN}} = 19.6$ and 200 GeV

    E-Print Network [OSTI]

    Adamczyk, L; Agakishiev, G; Aggarwal, M M; Ahammed, Z; Alekseev, I; Alford, J; Aparin, A; Arkhipkin, D; Aschenauer, E C; Averichev, G S; Banerjee, A; Bellwied, R; Bhasin, A; Bhati, A K; Bhattarai, P; Bielcik, J; Bielcikova, J; Bland, L C; Bordyuzhin, I G; Bouchet, J; Brandin, A V; Bunzarov, I; Burton, T P; Butterworth, J; Caines, H; S'anchez, M Calder'on de la Barca; campbell, J M; Cebra, D; Cervantes, M C; Chakaberia, I; Chaloupka, P; Chang, Z; Chattopadhyay, S; Chen, J H; Chen, X; Cheng, J; Cherney, M; Christie, W; Codrington, M J M; Contin, G; Crawford, H J; Das, S; De Silva, L C; Debbe, R R; Dedovich, T G; Deng, J; Derevschikov, A A; di Ruzza, B; Didenko, L; Dilks, C; Dong, X; Drachenberg, J L; Draper, J E; Du, C M; Dunkelberger, L E; Dunlop, J C; Efimov, L G; Engelage, J; Eppley, G; Esha, R; Evdokimov, O; Eyser, O; Fatemi, R; Fazio, S; Federic, P; Fedorisin, J; Feng,; Filip, P; Fisyak, Y; Flores, C E; Fulek, L; Gagliardi, C A; Garand, D; Geurts, F; Gibson, A; Girard, M; Greiner, L; Grosnick, D; Gunarathne, D S; Guo, Y; Gupta, S; Gupta, A; Guryn, W; Hamad, A; Hamed, A; Haque, R; Harris, J W; He, L; Heppelmann, S; Hirsch, A; Hoffmann, G W; Hofman, D J; Horvat, S; Huang, H Z; Huang, X; Huang, B; Huck, P; Humanic, T J; Igo, G; Jacobs, W W; Jang, H; Jiang, K; Judd, E G; Kabana, S; Kalinkin, D; Kang, K; Kauder, K; Ke, H W; Keane, D; Kechechyan, A; Khan, Z H; Kikola, D P; Kisel, I; Kisiel, A; Klein, S R; Koetke, D D; Kollegger, T; Kosarzewski, L K; Kotchenda, L; Kraishan, A F; Kravtsov, P; Krueger, K; Kulakov, I; Kumar, L; Kycia, R A; Lamont, M A C; Landgraf, J M; Landry, K D; Lauret, J; Lebedev, A; Lednicky, R; Lee, J H; Li, X; Li, X; Li, W; Li, Z M; Li, Y; Li, C; Lisa, M A; Liu, F; Ljubicic, T; Llope, W J; Lomnitz, M; Longacre, R S; Luo, X; Ma, L; Ma, R; Ma, G L; Ma, Y G; Magdy, N; Majka, R; Manion, A; Margetis, S; Markert, C; Masui, H; Matis, H S; McDonald, D; Meehan, K; Minaev, N G; Mioduszewski, S; Mohanty, B; Mondal, M M; Morozov, D A; Mustafa, M K; Nandi, B K; Nasim, Md; Nayak, T K; Nigmatkulov, G; Nogach, L V; Noh, S Y; Novak, J; Nurushev, S B; Odyniec, G; Ogawa, A; Oh, K; Okorokov, V; Olvitt, D L; Page, B S; Pan, Y X; Pandit, Y; Panebratsev, Y; Pawlak, T; Pawlik, B; Pei, H; Perkins, C; Peterson, A; Pile, P; Planinic, M; Pluta, J; Poljak, N; Poniatowska, K; Porter, J; Posik, M; Poskanzer, A M; Pruthi, N K; Putschke, J; Qiu, H; Quintero, A; Ramachandran, S; Raniwala, R; Raniwala, S; Ray, R L; Ritter, H G; Roberts, J B; Rogachevskiy, O V; Romero, J L; Roy, A; Ruan, L; Rusnak, J; Rusnakova, O; Sahoo, N R; Sahu, P K; Sakrejda, I; Salur, S; Sandacz, A; Sandweiss, J; Sarkar, A; Schambach, J; Scharenberg, R P; Schmah, A M; Schmidke, W B; Schmitz, N; Seger, J; Seyboth, P; Shah, N; Shahaliev, E; Shanmuganathan, P V; Shao, M; Sharma, M K; Sharma, B; Shen, W Q; Shi, S S; Shou, Q Y; Sichtermann, E P; Sikora, R; Simko, M; Skoby, M J; Smirnov, N; Smirnov, D; Solanki, D; Song, L; Sorensen, P; Spinka, H M; Srivastava, B; Stanislaus, T D S; Stock, R; Strikhanov, M; Stringfellow, B; Sumbera, M; Summa, B J; Sun, Y; Sun, Z; Sun, X M; Sun, X; Surrow, B; Svirida, D N; Szelezniak, M A; Takahashi, J; Tang, A H; Tang, Z; Tarnowsky, T; Tawfik, A N; Thomas, J H; Timmins, A R; Tlusty, D; Tokarev, M; Trentalange, S; Tribble, R E; Tribedy, P; Tripathy, S K; Trzeciak, B A; Tsai, O D; Ullrich, T; Underwood, D G; Upsal, I; Van Buren, G; van Nieuwenhuizen, G; Vandenbroucke, M; Varma, R; Vasiliev, A N; Vertesi, R; Videbćk, F; Viyogi, Y P; Vokal, S; Voloshin, S A; Vossen, A; Wang, Y; Wang, F; Wang, H; Wang, J S; Wang, G; Wang, Y; Webb, J C; Webb, G; Wen, L; Westfall, G D; Wieman, H; Wissink, S W; Witt, R; Wu, Y F; Xiao, Z; Xie, W; Xin, K; Xu, Z; Xu, Q H; Xu, N; Xu, H; Xu, Y F; Yang, Y; Yang, C; Yang, S; Yang, Q; Yang, Y; Ye, Z; Yepes, P; Yi, L; Yip, K; Yoo, I -K; Yu, N; Zbroszczyk, H; Zha, W; Zhang, J B; Zhang, X P; Zhang, S; Zhang, J; Zhang, Z; Zhang, Y; Zhang, J L; Zhao, F; Zhao, J; Zhong, C; Zhou, L; Zhu, X; Zoulkarneeva, Y; Zyzak, M

    2015-01-01T23:59:59.000Z

    The acceptance-corrected dielectron excess mass spectra, where the known hadronic sources have been subtracted from the inclusive dielectron mass spectra, are reported for the first time at mid-rapidity $|y_{ee}|<1$ in minimum-bias Au+Au collisions at $\\sqrt{s_{NN}}$ = 19.6 and 200 GeV. The excess mass spectra are consistently described by a model calculation with a broadened $\\rho$ spectral function for $M_{ee}<1.1$ GeV/$c^{2}$. The integrated dielectron excess yield at $\\sqrt{s_{NN}}$ = 19.6 GeV for $0.4longer th...

  4. Aerospace Applications for OLED Lighting

    Energy Savers [EERE]

    2015 Boeing. All rights reserved. Export Controlled ECCN: 9E991 NLR Aerospace economics drive long development cycles and even longer product lifecycles * Development of a...

  5. Waste acceptance and waste loading for vitrified Oak Ridge tank waste

    SciTech Connect (OSTI)

    Harbour, J.R.; Andrews, M.K.

    1997-06-06T23:59:59.000Z

    The Office of Science and Technology of the DOE has funded a joint project between the Oak Ridge National Laboratory (ORNL) and the Savannah River Technology Center (SRTC) to evaluate vitrification and grouting for the immobilization of sludge from ORNL tank farms. The radioactive waste is from the Gunite and Associated Tanks (GAAT), the Melton Valley Storage Tanks (MVST), the Bethel Valley Evaporator Service Tanks (BVEST), and the Old Hydrofractgure Tanks (OHF). Glass formulation development for sludge from these tanks is discussed in an accompanying article for this conference (Andrews and Workman). The sludges contain transuranic radionuclides at levels which will make the glass waste form (at reasonable waste loadings) TRU. Therefore, one of the objectives for this project was to ensure that the vitrified waste form could be disposed of at the Waste Isolation Pilot Plant (WIPP). In order to accomplish this, the waste form must meet the WIPP Waste Acceptance Criteria (WAC). An alternate pathway is to send the glass waste forms for disposal at the Nevada Test Site (NTS). A sludge waste loading in the feed of 6 wt percent will lead to a waste form which is non-TRU and could potentially be disposed of at NTS. The waste forms would then have to meet the requirements of the NTS WAC. This paper presents SRTC`s efforts at demonstrating that the glass waste form produced as a result of vitrification of ORNL sludge will meet all the criteria of the WIPP WAC or NTS WAC.

  6. Finally, the Academy has ac-cepted eleven new members, for a

    E-Print Network [OSTI]

    Finally, the Academy has ac- cepted eleven new members, for a total of 73 members. Please see of educators. If you are not already an Academy member, please consider submitting your application. A review of member- ship categories is on page 2 of this Academy Bulletin. Complete de- tails are on the Academy

  7. Improved Criteria for Acceptable Yield Point Elongation in Surface Critical Steels

    SciTech Connect (OSTI)

    Dr. David Matlock; Dr. John Speer

    2007-05-30T23:59:59.000Z

    Yield point elongation (YPE) is considered undesirable in surface critical applications where steel is formed since "strain lines" or Luders bands are created during forming. This project will examine in detail the formation of luders bands in industrially relevant strain states including the influence of substrate properties and coatings on Luders appearance. Mechanical testing and surface profilometry were the primary methods of investigation.

  8. Application Acceleration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAbout theOFFICEAmesApplication Acceleration on Current and Future Cray

  9. Solvent-enhanced dye diffusion in polymer thin films for polymer light-emitting diode application

    E-Print Network [OSTI]

    Solvent-enhanced dye diffusion in polymer thin films for polymer light-emitting diode application 2004; accepted 24 August 2004) The method of solvent-enhanced dye diffusion for patterning full dry transfer of dye onto a device polymer film, the dye remains on the surface of the polymer layer

  10. Erwin Schroedinger and the rise of wave mechanics. III. Early response and applications

    SciTech Connect (OSTI)

    Mehra, J.

    1988-02-01T23:59:59.000Z

    This article (Part III) deals with the early applications of wave mechanics to atomic problems - including the demonstration of the formal mathematical equivalence of wave mechanics with the quantum mechanics of Born, Heisenberg, and Jordan, and that of Dirac - by Schroedinger himself and others. The new theory was immediately accepted by the scientific community.

  11. Development of the Great Lakes Ice-circulation Model (GLIM): Application to Lake Erie in 20032004

    E-Print Network [OSTI]

    due to strong cooling and wind mixing. Prediction of the lake's ice extent (i.e., ice coverDevelopment of the Great Lakes Ice-circulation Model (GLIM): Application to Lake Erie in 2003: Received 4 May 2009 Accepted 30 November 2009 Communicated by Dr. Ram Yerubandi Index words: Coupled Ice

  12. Statistical fracture modeling: crack path and fracture criteria with application to homogeneous and

    E-Print Network [OSTI]

    Ritchie, Robert

    Statistical fracture modeling: crack path and fracture criteria with application to homogeneous; accepted 23 January 2002 Abstract Analysis has been performed on fracture initiation near a crack in a brittle material with strength described by Weibull statistics. This nonlocal fracture model allows

  13. Characterization of a liquid-crystal ultrafast pulse shaper for ultra-broadband applications

    E-Print Network [OSTI]

    Characterization of a liquid-crystal ultrafast pulse shaper for ultra-broadband applications pulse shaping Spatial light modulators Ultrafast optics Femtosecond pulses a b s t r a c t By combining in revised form 22 January 2014 Accepted 28 January 2014 Available online 6 February 2014 Keywords: Ultrafast

  14. Lebanese Science Journal, Vol. 8, No. 1, 2007 19 APPLICATION OF RESTORATION ECOLOGY

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Lebanese Science Journal, Vol. 8, No. 1, 2007 19 APPLICATION OF RESTORATION ECOLOGY PRINCIPLES, France ckhater@cnrs.edu.lb (Received 23 June 2006 - Accepted 1 March 2007) ABSTRACT Restoration ecology is an emerging science dealing with applied ecology and aiming at "helping nature to recreate itself

  15. Date March 13, 2012 Invites applications for the following position (s)

    E-Print Network [OSTI]

    an equivalent combination of formal education, certificate/program of study and experience is acceptable. BI. Performs other related duties consistent with position title and classification. Please note: Days of post-secondary education which includes courses in accounting and related software applications

  16. Market penetration analysis for direct heat geothermal energy applications

    SciTech Connect (OSTI)

    Thomas, R.J.; Nelson, R.A.

    1981-06-01T23:59:59.000Z

    This study is concerned with the estimation of the National geothermal market potential and penetration in direct heat applications for residences and certain industry segments. An important aspect of this study is that the analysis considers both known and anticipated goethermal resources. This allows for an estimation of the longer-range potential for geothermal applications. Thus the approach and results of this study provide new insights and valuable information not obtained from more limited, site-specific types of analyses. Estimates made in this study track geothermal market potential and projected penetration from the present to the year 2020. Private sector commercialization of geothermal energy over this period requires assistance in the identification of markets and market sizes, potential users, and appropriate technical applications.

  17. PAPER ACCEPTED TO IEEE TRANSACTIONS ON POWER SYSTEMS, Nov. 2008 1 Reactive Power and Voltage Control in Distribution

    E-Print Network [OSTI]

    Cañizares, Claudio A.

    PAPER ACCEPTED TO IEEE TRANSACTIONS ON POWER SYSTEMS, Nov. 2008 1 Reactive Power and Voltage) problem associated with reactive power and voltage control in distribution systems to minimize daily--Distribution systems, reactive power control, voltage control, optimal switching operations, mixed integer nonlinear

  18. PAPER ACCEPTED TO THE IEEE TRANSACTIONS ON POWER SYSTEMS 1 Sensitivity-based Security-constrained OPF Market

    E-Print Network [OSTI]

    Cañizares, Claudio A.

    PAPER ACCEPTED TO THE IEEE TRANSACTIONS ON POWER SYSTEMS 1 Sensitivity-based Security-constrained OPF Market Clearing Model F. Milano, Member, IEEE, C. A. Ca~nizares, Senior Member, IEEE, and A. J constraints that properly include voltage stability limits in the operation of competitive electricity markets

  19. A Model of Attitudes toward the Acceptance of Mobile Phone Use in Public Places Brenda Mak, San Francisco State University

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    technology with a fast diffusion rate (Kim, 2005). Mobile phones have brought about improvements and Ratten, 2007), and mobile customer relationship management (Moedritscher and Mussnig, 2005), offering1 A Model of Attitudes toward the Acceptance of Mobile Phone Use in Public Places Brenda Mak, San

  20. SUBJECT: ACCEPTANCE OF THE FINAL SITE OBSERVATIONAL WORK PLAN FOR THE URANIUM MILL TAILINGS REMEDIAL ACTION PROJECT SITE AT

    E-Print Network [OSTI]

    unknown authors

    2001-01-01T23:59:59.000Z

    and concludes that it is generally acceptable as DOE’s proposed strategy for compliance with the U.S. Environmental Protection Agency groundwater protection standards in 40 CFR Part 192. The staff’s detailed review of the Grand Junction SOWP is documented in the enclosed

  1. It is now generally accepted that ATP can act as a fast excitatory neurotransmitter at the autonomic neuromuscular

    E-Print Network [OSTI]

    Burnstock, Geoffrey

    It is now generally accepted that ATP can act as a fast excitatory neurotransmitter a class of ligand-gated cation channels, the P2X receptors. ATP also plays a role in presynaptic North & Barnard, 1997). Thus, P2X1 and P2X� receptors are activated by á,â_methyleneATP (áâ_MeATP

  2. Accepted to Diamond and Related Materials A kinetic model of diamond nucleation and silicon carbide interlayer formation during

    E-Print Network [OSTI]

    Dandy, David

    Accepted to Diamond and Related Materials A kinetic model of diamond nucleation and silicon carbide Engineering, Colorado State University, Fort Collins, CO, USA Abstract The presence of thin silicon carbide diffusion of carbon atoms into the silicon carbide layer, and the morphology and orientation of the diamond

  3. Major in Aerospace Engineering Master of Engineering (with creative component) A minimum of 27 credits of acceptable

    E-Print Network [OSTI]

    Lin, Zhiqun

    Major in Aerospace Engineering Master of Engineering (with creative component) ­ A minimum of 27 Engineering along with a minimum of 3 credits of Aer E 599 (creative component) must be taken. The POS Mechanics Master of Engineering (with creative component) ­ A minimum of 24 credits of acceptable course

  4. Accepted for publication in the International Journal of Life Cycle Assessment on 13 March 2013 Stochastic and epistemic uncertainty

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    2013 #12;4 1. Introduction Life cycle assessment (LCA) aims at modelling complex systems that usually1 Accepted for publication in the International Journal of Life Cycle Assessment on 13 March 2013 of Life Cycle Assessment (2013) 1-10" DOI : 10.1007/s11367-013-0572-6 #12;2 Abstract Purpose: When

  5. Municipal Solid Waste Landfills The following Oklahoma landfills currently accept dead livestock. As each facility has different guidelines and

    E-Print Network [OSTI]

    Balasundaram, Balabhaskar "Baski"

    Municipal Solid Waste Landfills The following Oklahoma landfills currently accept dead livestock-581-3468 Garfield City of Enid Landfill 580-249-4917 Garvin Foster Waste Disposal Landfill 405-238-2012 Jackson City-436-1403 Call ahead, may limit qty. Pottawatomie Absolute Waste Solutions 405-598-3893 Call ahead Seminole

  6. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY Accepted June 2008 HYDROGEN STORAGE FOR MIXED WIND-NUCLEAR POWER PLANTS IN

    E-Print Network [OSTI]

    Cañizares, Claudio A.

    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY Accepted June 2008 1 HYDROGEN STORAGE FOR MIXED WIND-NUCLEAR evaluation of hydrogen production and storage for a mixed wind-nuclear power plant considering some new of a combined nuclear-wind-hydrogen system is discussed first, where the selling and buying of electricity

  7. Compliance with Waste Acceptance Criteria of WIPP and NTS for Vitrified Low-Level and TRU Waste Forms

    SciTech Connect (OSTI)

    Harbour, J.R. [Westinghouse Savannah River Company, AIKEN, SC (United States); Andrews, M.K.

    1998-07-01T23:59:59.000Z

    A joint project between the Oak Ridge National Laboratory (ORNL) and the Savannah River Technology Center (SRTC) has been established to evaluate vitrification as an option for the immobilization of waste within ORNL tank farms. This paper presents details of calculations based on current best available analyses of the Oak Ridge Tanks on the limits for waste loadings imposed by the waste acceptance criteria.

  8. Abstract --With the increasing acceptance, micro-grid, combined with distributed generation (DG), may be operated in

    E-Print Network [OSTI]

    Chen, Zhe

    Abstract --With the increasing acceptance, micro-grid, combined with distributed generation (DG generation (DG) technology [1-3]. DG units may be located in distribution network or on the local load side), may be operated in two modes: grid-connected mode and island mode. In grid connected mode, energy

  9. Preprint: Clip Art Rendering of Smooth Isosurfaces Accepted pending revision for IEEE Transactions on Visualization and Computer Graphics

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 Preprint: Clip Art Rendering of Smooth Isosurfaces Accepted pending revision for IEEE with numerous renderings used to illustrate the paper itself. Index Terms-- particle systems, non-photorealistic rendering, line art drawing I. INTRODUCTION COMPUTER GRAPHICS is largely the study of com- putational tools

  10. Chemistry Page 83Sonoma State University 2011-2012 Catalog rate for acceptance into advanced degree programs in chemistry

    E-Print Network [OSTI]

    Ravikumar, B.

    Chemistry Page 83Sonoma State University 2011-2012 Catalog rate for acceptance into advanced degree programs in chemistry and biochemistry; medical, dental, and veterinary schools; cell and molecular biology, space chemistry, teaching at all levels, medical technology, pharmaceuticals, patent law, materials

  11. 17/03/2006 Accepted in European Journal of Cancer Prevention Time Trends and Geographic Variations for Thyroid Cancer

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    17/03/2006 Accepted in European Journal of Cancer Prevention 1 Time Trends and Geographic Variations for Thyroid Cancer in New Caledonia, a Very High Incidence Area (1985-1999) Thérèse Truong1 mail: guenel@vjf.inserm.fr Running head: Incidence of thyroid cancer in New Caledonia #12

  12. Preprint accepted for publication in Computers and Education Computer-Assisted Assignments in a Large Physics Class

    E-Print Network [OSTI]

    1 Preprint accepted for publication in Computers and Education Computer-Assisted Assignments interactivecontact with the students. 1. Introduction The use of computers in education is very widespread was electricity magnetism, optics and modern physics as the second part of the introductory physics sequence

  13. Accepted at Pacific Graphics 2011 Bing-Yu Chen, Jan Kautz, Tong-Yee Lee, and Ming C. Lin

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Accepted at Pacific Graphics 2011 Bing-Yu Chen, Jan Kautz, Tong-Yee Lee, and Ming C. Lin Authors with an approximate voxel cone tracing that allows for a fast estimation of the visibility and incoming energy. Our Descriptors (according to ACM CCS): I.3.7 [Computer Graphics]: Three-Dimensional Graphics and Realism

  14. Social acceptability of Satellite Power Systems (SPS): the near-term outlook

    SciTech Connect (OSTI)

    Klineberg, S L

    1980-05-01T23:59:59.000Z

    It is important, at this early stage in the concept development and evaluation of Satellite Power Systems, to explore aspects of contemporary social change that may be expected to complicate the process of achieving the necessary support of the American public for this new technological venture. Current public attitudes make it appear unlikely that a consensus will evolve during the 1980s favoring costly efforts to develop vast new supplies of conventional energy. Opinion polls reveal a pervasive worry over inflation, a broadening of aspirations to encompass quality-of-life concerns, a growing distrust of central governments, large corporations, big science and technology, and a continuing commitment to environmental protection - all of which suggests a social environment that is likely to resist the development of a major new high-technology energy system such as the SPS. Opposition to satellite power will focus on the high front-end development costs, on environmental and technical uncertainties, and on a generalized distrust of large bureaucracies and esoteric technologies. The SPS concept is also likely to be viewed with skepticism by those with vested interests in the long-run uses of coal, shale, fission, fusion, or on-site solar technologies. The growing commitment to energy conservation and the spreading deployment of dispersed renewable-energy systems strongly suggest that the unmet US demand for centrally generated electricity is unlikely to grow sufficiently over the next twenty years to convince a reluctant public of the need for so large an investment of scarce resources in the SPS program. Satellite Power Systems will have a problem in the area of public acceptability.

  15. Is Entombment an Acceptable Option for Decommissioning? An International Perspective - 13488

    SciTech Connect (OSTI)

    Belencan, Helen [US Department of Energy (United States)] [US Department of Energy (United States); Nys, Vincent [Federal Agency for Nuclear Control (Belgium)] [Federal Agency for Nuclear Control (Belgium); Guskov, Andrey [Scientific and Engineering Centre on Safety in Nuclear Energy (United States)] [Scientific and Engineering Centre on Safety in Nuclear Energy (United States); Francois, Patrice [Institut de radioprotection et de surete nucleaire (France)] [Institut de radioprotection et de surete nucleaire (France); Watson, Bruce [US Nuclear Regulatory Commission (United States)] [US Nuclear Regulatory Commission (United States); Ljubenov, Vladan [International Atomic Energy Agency (Austria)] [International Atomic Energy Agency (Austria)

    2013-07-01T23:59:59.000Z

    Selection of a decommissioning strategy is one of the key steps in the preparation for decommissioning of nuclear facilities and other facilities using radioactive material. Approaches being implemented or considered by Member States include immediate dismantling, deferred dismantling and entombment. Other options or slight modifications of these strategies are also possible. Entombment has been identified in the current International Atomic Energy Agency (IAEA) Safety Standards as one of the three basic decommissioning strategies and has been defined as a decommissioning strategy by which radioactive contaminants are encased in a structurally long lived material until radioactivity decays to a level permitting the unrestricted release of the facility, or release with restrictions imposed by the regulatory body. Although all three strategies have been considered, in principle, applicable to all facilities, their application to some facilities may not be appropriate owing to political concerns, safety or environmental requirements, technical considerations, local conditions or financial considerations. The IAEA is currently revising the decommissioning Safety Standards and one of the issues widely discussed has been the applicability of entombment in the context of decommissioning and its general objective to enable removal of regulatory control from the decommissioned facility. The IAEA recently established a consultancy to collect and discuss experience and lessons learned from entombment projects, to identify regulatory requirements and expectations for applying entombment as a decommissioning option strategy, in compliance with the internationally agreed standards. (authors)

  16. West Virginian No Longer Worried About Family's Safety | Department...

    Broader source: Energy.gov (indexed) [DOE]

    mountain winters hit for the last 12 years, Michael Shepard and his family had only a wood stove in their house for heat, plus a few kerosene heaters when the stove didn't do the...

  17. Longer life for glyco-based stationary engine coolants

    SciTech Connect (OSTI)

    Hohlfeld, R. [Dow Chemical Co., Houston, TX (United States)

    1996-07-01T23:59:59.000Z

    Large, stationary diesel engines used to compress natural gas that is to be transported down pipelines generate a great deal of heat. Unless this heat is dissipated efficiently, it will eventually cause an expensive breakdown. Whether the coolant uses ethylene glycol or propylene glycol, the two major causes of glycol degradation are heat and oxidation. The paper discusses inhibitors that enhance coolant service life and presents a comprehensive list of do`s and don`ts for users to gain a 20-year coolant life.

  18. Longer Life Lithium Ion Batteries with Silicon Anodes - Energy Innovation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6,Local CorrelationsConditions. |

  19. Sandia National Laboratories: capture more wind with longer rotors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1development Sandia, NREL Release Wavearc-faultbest paperbiomarineblendingthe

  20. Increased pump acceptance bandwidth in spontaneous parametric downconversion process using Bragg reflection waveguides

    E-Print Network [OSTI]

    K. Thyagarajan; R. Das; O. Alibart; M. de Micheli; D. B. Ostrowsky; S. Tanzilli

    2009-04-11T23:59:59.000Z

    In this paper we show that by suitably tailoring the dispersion characteristics of a Bragg reflection waveguide (BRW) mode, it is possible to achieve efficient photon pair generation over a large pump bandwidth while maintaining narrow signal bandwidth. The structure proposed consists of a high index core BRW with a periodically poled GaN core and periodically stratified cladding made up of alternate layers of $Al_{0.02}Ga_{0.98}N$ and $Al_{0.45}Ga_{0.55}N$. Such photon-pair generators should find applications in realizing compact and stable sources for quantum information processing.

  1. Gallium Lighting, LLC, Accepts Inaugural Position on the Industry Advisory Board of UC-Light Center to Help Bring Wireless Data

    E-Print Network [OSTI]

    Gallium Lighting, LLC, Accepts Inaugural Position on the Industry Advisory Board of UC-Light Center to Help Bring Wireless Data Communications Capabilities to LED Lights Fayetteville, GA ­ February 10, 2011 ­Gallium Lighting, LLC, announced today it has accepted an inaugural position

  2. ACCEPTED FOR PUBLICATION IN ROBOTICA PUBLISHED BY CAMBRIDGE UNIVERSITY PRESS 1 Tracking of a Joint Path for the Walking of an

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    ACCEPTED FOR PUBLICATION IN ROBOTICA PUBLISHED BY CAMBRIDGE UNIVERSITY PRESS 1 Tracking of a Joint,version1-26Feb2013 Author manuscript, published in "Robotica 22 (2004) 15-28" #12;ACCEPTED FOR PUBLICATION IN ROBOTICA PUBLISHED BY CAMBRIDGE UNIVERSITY PRESS 2 parameter: the arc length Ă?. A time scaling control

  3. Acceptable Knowledge Summary Report for Waste Stream: SR-T001-221F-HET/Drums

    SciTech Connect (OSTI)

    Lunsford, G.F.

    1999-08-23T23:59:59.000Z

    Since beginning operations in 1954, the Department of Energy's Savannah River Site FB-Line conducted atomic energy defense activities consistent with the listing in Section 10101(3) of the Nuclear Waste Policy Act of 1982. The facility mission was to process and convert dilute plutonium solution into highly purified weapons grade plutonium metal. As a result of various activities conducted in support of the mission (e.g., operation, maintenance, repair, clean up, and facility modifications), the facility generated transuranic waste. This document, along with referenced supporting documents, provides a defensible and auditable record of acceptable knowledge for one of the waste streams from the FB-Line. The waste was packaged in 55-gallon drums, then shipped to the transuranic waste storage facility in ''E'' area of the Savannah River Site. This acceptable knowledge report includes information relating to the facility's history, configuration,equipment, process operations, and waste management practices.

  4. Int. J. Spray and Comb. Dynamics -Accepted for publication 1 About the zero Mach number assumption in

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    as much as the the flame forcing ('Rayleigh') term. Besides, the net effect of the non zero Mach numberInt. J. Spray and Comb. Dynamics - Accepted for publication 1 About the zero Mach number assumption in the calculation of thermoacoustic instabilities By F. N I C O U D1 AND K. W I E C Z O R E K1,2 1 University

  5. A determination of the acceptability of the liquid media sampler as an alternative to the standard midget impinger

    E-Print Network [OSTI]

    Ruser, Bernard Henry

    2012-06-07T23:59:59.000Z

    no spillage or breakage, minimal physical entrainment, and collection efficiencies not significantly different from the standard midget impinger. The Liquid Nedia Sampler showed no significant variability in collection efficiency over its flow rate range... impinger in aqueous liquid media absorption method of contaminant collection in air sam- pling. The acceptability of the Liquid Media Sampler was based upon such performance factors as spillage, breakage, physical entrainment, and collection efficiency...

  6. Immediate Residency Application REGISTRAR'S OFFICE

    E-Print Network [OSTI]

    Franco, John

    , as of the first day of a term of enrollment, has accepted full-time, self-sustaining employment and established

  7. Full-Scale Cask Testing and Public Acceptance of Spent Nuclear Fuel Shipments - 12254

    SciTech Connect (OSTI)

    Dilger, Fred [Black Mountain Research, Henderson, NV 81012 (United States); Halstead, Robert J. [State of Nevada Agency for Nuclear Projects Carson City, NV 80906 (United States); Ballard, James D. [Department of Sociology, California State University, Northridge Northridge, CA 91330 (United States)

    2012-07-01T23:59:59.000Z

    Full-scale physical testing of spent fuel shipping casks has been proposed by the National Academy of Sciences (NAS) 2006 report on spent nuclear fuel transportation, and by the Presidential Blue Ribbon Commission (BRC) on America's Nuclear Future 2011 draft report. The U.S. Nuclear Regulatory Commission (NRC) in 2005 proposed full-scale testing of a rail cask, and considered 'regulatory limits' testing of both rail and truck casks (SRM SECY-05-0051). The recent U.S. Department of Energy (DOE) cancellation of the Yucca Mountain project, NRC evaluation of extended spent fuel storage (possibly beyond 60-120 years) before transportation, nuclear industry adoption of very large dual-purpose canisters for spent fuel storage and transport, and the deliberations of the BRC, will fundamentally change assumptions about the future spent fuel transportation system, and reopen the debate over shipping cask performance in severe accidents and acts of sabotage. This paper examines possible approaches to full-scale testing for enhancing public confidence in risk analyses, perception of risk, and acceptance of spent fuel shipments. The paper reviews the literature on public perception of spent nuclear fuel and nuclear waste transportation risks. We review and summarize opinion surveys sponsored by the State of Nevada over the past two decades, which show consistent patterns of concern among Nevada residents about health and safety impacts, and socioeconomic impacts such as reduced property values along likely transportation routes. We also review and summarize the large body of public opinion survey research on transportation concerns at regional and national levels. The paper reviews three past cask testing programs, the way in which these cask testing program results were portrayed in films and videos, and examines public and official responses to these three programs: the 1970's impact and fire testing of spent fuel truck casks at Sandia National Laboratories, the 1980's regulatory and demonstration testing of MAGNOX fuel flasks in the United Kingdom (the CEGB 'Operation Smash Hit' tests), and the 1980's regulatory drop and fire tests conducted on the TRUPACT II containers used for transuranic waste shipments to the Waste Isolation Pilot Plant in New Mexico. The primary focus of the paper is a detailed evaluation of the cask testing programs proposed by the NRC in its decision implementing staff recommendations based on the Package Performance Study, and by the State of Nevada recommendations based on previous work by Audin, Resnikoff, Dilger, Halstead, and Greiner. The NRC approach is based on demonstration impact testing (locomotive strike) of a large rail cask, either the TAD cask proposed by DOE for spent fuel shipments to Yucca Mountain, or a similar currently licensed dual-purpose cask. The NRC program might also be expanded to include fire testing of a legal-weight truck cask. The Nevada approach calls for a minimum of two tests: regulatory testing (impact, fire, puncture, immersion) of a rail cask, and extra-regulatory fire testing of a legal-weight truck cask, based on the cask performance modeling work by Greiner. The paper concludes with a discussion of key procedural elements - test costs and funding sources, development of testing protocols, selection of testing facilities, and test peer review - and various methods of communicating the test results to a broad range of stakeholder audiences. (authors)

  8. Waste Acceptance Testing of Secondary Waste Forms: Cast Stone, Ceramicrete and DuraLith

    SciTech Connect (OSTI)

    Mattigod, Shas V.; Westsik, Joseph H.; Chung, Chul-Woo; Lindberg, Michael J.; Parker, Kent E.

    2011-08-12T23:59:59.000Z

    To support the selection of a waste form for the liquid secondary wastes from WTP, Washington River Protection Solutions has initiated secondary-waste-form testing work at Pacific Northwest National Laboratory (PNNL). In anticipation of a down-selection process for a waste form for the Solidification Treatment Unit to be added to the ETF, PNNL is conducting tests on four candidate waste forms to evaluate their ability to meet potential waste acceptance criteria for immobilized secondary wastes that would be placed in the IDF. All three waste forms demonstrated compressive strengths above the minimum 3.45 MPa (500 psi) set as a target for cement-based waste forms. Further, none of the waste forms showed any significant degradation in compressive strength after undergoing thermal cycling (30 cycles in a 10 day period) between -40 C and 60 C or water immersion for 90 days. The three leach test methods are intended to measure the diffusion rates of contaminants from the waste forms. Results are reported in terms of diffusion coefficients and a leachability index (LI) calculated based on the diffusion coefficients. A smaller diffusion coefficient and a larger LI are desired. The NRC, in its Waste Form Technical Position (NRC 1991), provides recommendations and guidance regarding methods to demonstrate waste stability for land disposal of radioactive waste. Included is a recommendation to conduct leach tests using the ANS 16.1 method. The resulting leachability index (LI) should be greater than 6.0. For Hanford secondary wastes, the LI > 6.0 criterion applies to sodium leached from the waste form. For technetium and iodine, higher targets of LI > 9 for Tc and LI > 11 for iodine have been set based on early waste-disposal risk and performance assessment analyses. The results of these three leach tests conducted for a total time between 11days (ASTM C1308) to 90 days (ANS 16.1) showed: (1) Technetium diffusivity: ANSI/ANS 16.1, ASTM C1308, and EPA 1315 tests indicated that all the waste forms had leachability indices better than the target LI > 9 for technetium; (2) Rhenium diffusivity: Cast Stone 2M specimens, when tested using EPA 1315 protocol, had leachability indices better than the target LI > 9 for technetium based on rhenium as a surrogate for technetium. All other waste forms tested by ANSI/ANS 16.1, ASTM C1308, and EPA 1315 test methods had leachability indices that were below the target LI > 9 for Tc based on rhenium release. These studies indicated that use of Re(VII) as a surrogate for 99Tc(VII) in low temperature secondary waste forms containing reductants will provide overestimated diffusivity values for 99Tc. Therefore, it is not appropriate to use Re as a surrogate 99Tc in future low temperature waste form studies. (3) Iodine diffusivity: ANSI/ANS 16.1, ASTM C1308, and EPA 1315 tests indicated that the three waste forms had leachability indices that were below the target LI > 11 for iodine. Therefore, it may be necessary to use a more effective sequestering material than silver zeolite used in two of the waste forms (Ceramicrete and DuraLith); (4) Sodium diffusivity: All the waste form specimens tested by the three leach methods (ANSI/ANS 16.1, ASTM C1308, and EPA 1315) exceeded the target LI value of 6; (5) All three leach methods (ANS 16.1, ASTM C1308 and EPA 1315) provided similar 99Tc diffusivity values for both short-time transient diffusivity effects as well as long-term ({approx}90 days) steady diffusivity from each of the three tested waste forms (Cast Stone 2M, Ceramicrete and DuraLith). Therefore, any one of the three methods can be used to determine the contaminant diffusivities from a selected waste form.

  9. Physical countermeasures to sustain acceptable living and working conditions in radioactively contaminated residential areas

    E-Print Network [OSTI]

    Andersson, K G; Roed, J

    2003-01-01T23:59:59.000Z

    The Chernobyl accident highlighted the need in nuclear preparedness for robust, effective and sustainable countermeasure strategies for restoration of radioactively contaminated residential areas. Under the EC-supporter STRATEGY project a series of investigations were made of countermeasures that were deemed potentially applicable for implementation in such events in European Member States. The findings are presented in this report, in a standardised data sheet format to clarify the features of the individual methods and facilitate intercomparison. The aspects of averted doses and management of wastes generated by countermeasures had to be described separately to provide room for the required level of detail. The information is mainly intended as a tool for decision makers and planners and constitutes of basis for the STRATEGY decision framework for remediation of contaminated urban areas. (au)

  10. IB Peer Advisor Application Dear Applicant,

    E-Print Network [OSTI]

    California at Berkeley, University of

    IB Peer Advisor Application 2014-2015 Dear Applicant, Thank you for your interest in being an IB Peer Advisor for the 2014-15 academic year. These positions provide valuable opportunities for students all of the components of the peer advisor position before applying, · a one page application form

  11. Reducing biosolids disposal costs using land application in forested areas

    SciTech Connect (OSTI)

    Huffines, R.L.

    1995-11-01T23:59:59.000Z

    Switching biosolids land application from a reclamation site to a forested site significantly reduced the cost of biosolids disposal at the Savannah River Site. Previous beneficial reuse programs focused on reclamation of existing borrow pits. While extremely beneficial, this program became very costly due to the regulatory requirements for groundwater monitoring, soil monitoring and frequent biosolids analyses. A new program was developed to reuse biosolids in forested areas where the biosolids could be used as a soil conditioner and fertilizer to enhance timber yield. The forested land application site was designed so that groundwater monitoring and soil monitoring could be eliminated while biosolids monitoring and site maintenance were minimized. Monitoring costs alone were reduced by 80%. Capital costs for site preparation were also significantly reduced since there was no longer a need for expensive groundwater monitoring wells.

  12. Application Process and Eligibility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Program Application Process and Eligibility Application Process and Eligibility Both US and non-US citizens are eligible to apply, but US citizenship may be required for some...

  13. SAGE Application Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Application Process SAGE Application Process A National Science Foundation Research Experiences for Undergraduates program Contacts Institute Director Harald Dogliani-Los Alamos...

  14. A model of the VU (volume-unit) meter, with speech applications Bryce E. Lobdell and Jont B. Allen

    E-Print Network [OSTI]

    Allen, Jont

    A model of the VU (volume-unit) meter, with speech applications Bryce E. Lobdell and Jont B. Allen October 2006; accepted 12 October 2006 The Volume-Unit VU meter, used in speech research prior. There are no known software implementations of this meter, which meet the 1954 ASA standard and provide

  15. A Born-Oppenheimer approximation for path integrals with an application to electron solvation in polarizable fluids

    E-Print Network [OSTI]

    Berne, Bruce J.

    A Born-Oppenheimer approximation for path integrals with an application to electron solvation (Received 8 February 1993; accepted 13 April 1993) The Born-Oppenheimer approximation is introduced this to simulations. We devise a new adiabatic expression which we call the free energy Born-Oppenheimer approximation

  16. Interdiffusion in CoFeCu multilayers and its application to spin-valve structures for data storage

    E-Print Network [OSTI]

    Laughlin, David E.

    , the interdiffusion coefficients for all layers in the spin valve have to be determined. For diffusion drivenInterdiffusion in CoFeĂ?Cu multilayers and its application to spin-valve structures for data storage, Pennsylvania 15213-3890 Received 13 February 2003; accepted 30 April 2003 Spin-valve structures might

  17. Passport Checklist for Adult Applicants (age 16 or older) Check or money order for fees payable to Department of State

    E-Print Network [OSTI]

    Hull, Elaine

    proof of U.S. citizenship such as a U.S. birth certificate naturalization certificate, Consular Report of Birth Abroad, or previously issued U.S. Passport. Copies are not acceptable. Birth certificates may of the· applicant's parent(s) to be listed on all certified birth certificates to be considered

  18. Public acceptance activities for the development of new commercial low-level radioactive waste disposal capacity in the United States of America

    SciTech Connect (OSTI)

    Ozaki, C.B.; Scott, R.L. [EG and G Idaho, Inc., Idaho Falls, ID (United States)

    1993-12-31T23:59:59.000Z

    In the US, the states are responsible for providing disposal capability for commercial low-level radioactive waste generated within their borders. Public acceptance of state activities toward developing this capability is a key factor in the ultimate success of state efforts. The states are using several different approaches to gain public acceptance for the location and development of new low-level radioactive waste disposal facilities. This presentation describes state efforts to gain public acceptance for siting and developing activities and discusses the lessons learned from these state experiences.

  19. Market driven strategy for acquisition of waste acceptance and transportation services for commercial spent fuel in the United States

    SciTech Connect (OSTI)

    Lemeshewky, W.; Macaluso, C.; Smith, P. [Dept. of Energy, Washington, DC (United States); Teer, B. [JAI Corp., Fairfax, VA (United States)

    1998-05-01T23:59:59.000Z

    The Department of Energy has the responsibility for the shipment of spent nuclear fuel (SNF) from commercial reactors to a Federal facility for storage and/or disposal. DOE has developed a strategy for a market driven approach for the acquisition of transportation services and equipment which will maximize the participation of private industry. To implement this strategy, DOE is planning to issue a Request for Proposal (RFP) for the provision of the required services and equipment to accept SNF from the utilities and transport the SNF to a Federal facility. The paper discusses this strategy and describes the RFP.

  20. PUBLIC AND REGULATORY ACCEPTANCE OF BLENDING OF RADIOACTIVE WASTE VS DILUTION

    SciTech Connect (OSTI)

    Goldston, W.

    2010-11-30T23:59:59.000Z

    On April 21, 2009, the Energy Facilities Contractors Group (EFCOG) Waste Management Working Group (WMWG) provided a recommendation to the Department of Energy's Environmental Management program (DOE-EM) concerning supplemental guidance on blending methodologies to use to classify waste forms to determine if the waste form meets the definition of Transuranic (TRU) Waste or can be classified as Low-Level Waste (LLW). The guidance provides specific examples and methods to allow DOE and its Contractors to properly classify waste forms while reducing the generation of TRU wastes. TRU wastes are much more expensive to characterize at the generator's facilities, ship, and then dispose at the Waste Isolation Pilot Plant (WIPP) than Low-Level Radioactive Waste's disposal. Also the reduction of handling and packaging of LLW is inherently less hazardous to the nuclear workforce. Therefore, it is important to perform the characterization properly, but in a manner that minimizes the generation of TRU wastes if at all possible. In fact, the generation of additional volumes of radioactive wastes under the ARRA programs, this recommendation should improve the cost effective implementation of DOE requirements while properly protecting human health and the environment. This paper will describe how the message of appropriate, less expensive, less hazardous blending of radioactive waste is the 'right' thing to do in many cases, but can be confused with inappropriate 'dilution' that is frowned upon by regulators and stakeholders in the public. A proposal will be made in this paper on how to communicate this very complex and confusing technical issue to regulatory bodies and interested stakeholders to gain understanding and approval of the concept. The results of application of the proposed communication method and attempt to change the regulatory requirements in this area will be discussed including efforts by DOE and the NRC on this very complex subject.

  1. Business Case for a Micro-Combined Heat and Power Fuel Cell System in Commercial Applications

    SciTech Connect (OSTI)

    Brooks, Kriston P.; Makhmalbaf, Atefe; Anderson, David M.; Amaya, Jodi P.; Pilli, Siva Prasad; Srivastava, Viraj; Upton, Jaki F.

    2013-10-30T23:59:59.000Z

    Combined heat and power fuel cell systems (CHP-FCSs) provide consistent electrical power and hot water with greater efficiency and lower emissions than alternative sources. These systems can be used either as baseload, grid-connected, or as off-the-grid power sources. This report presents a business case for CHP-FCSs in the range of 5 to 50 kWe. Systems in this power range are considered micro-CHP-FCS. For this particular business case, commercial applications rather than residential or industrial are targeted. To understand the benefits of implementing a micro-CHP-FCS, the characteristics that determine their competitive advantage must first be identified. Locations with high electricity prices and low natural gas prices are ideal locations for micro-CHP-FCSs. Fortunately, these high spark spread locations are generally in the northeastern area of the United States and California where government incentives are already in place to offset the current high cost of the micro-CHP-FCSs. As a result of the inherently high efficiency of a fuel cell and their ability to use the waste heat that is generated as a CHP, they have higher efficiency. This results in lower fuel costs than comparable alternative small-scale power systems (e.g., microturbines and reciprocating engines). A variety of markets should consider micro-CHP-FCSs including those that require both heat and baseload electricity throughout the year. In addition, the reliable power of micro-CHP-FCSs could be beneficial to markets where electrical outages are especially frequent or costly. Greenhouse gas emission levels from micro-CHP-FCSs are 69 percent lower, and the human health costs are 99.9 percent lower, than those attributed to conventional coal-fired power plants. As a result, FCSs can allow a company to advertise as environmentally conscious and provide a bottom-line sales advantage. As a new technology in the early stages of adoption, micro-CHP-FCSs are currently more expensive than alternative technologies. As the technology gains a foothold in its target markets and demand increases, the costs will decline in response to improved manufacturing efficiencies, similar to trends seen with other technologies. Transparency Market Research forecasts suggest that the CHP-FCS market will grow at a compound annual growth rate of greater than 27 percent over the next 5 years. These production level increases, coupled with the expected low price of natural gas, indicate the economic payback period will move to less than 5 years over the course of the next 5 years. To better understand the benefits of micro-CHP-FCSs, The U.S. Department of Energy worked with ClearEdge Power to install fifteen 5-kWe fuel cells in the commercial markets of California and Oregon. Pacific Northwest National Laboratory is evaluating these systems in terms of economics, operations, and their environmental impact in real-world applications. As expected, the economic analysis has indicated that the high capital cost of the micro-CHP-FCSs results in a longer payback period than typically is acceptable for all but early-adopter market segments. However, a payback period of less than 3 years may be expected as increased production brings system cost down, and CHP incentives are maintained or improved.

  2. An empirical examination of the role of characteristics of the format, standard setting alliance and alliance partners in the market acceptance of formats

    E-Print Network [OSTI]

    Dan, Sujan Mathew

    2009-05-15T23:59:59.000Z

    New product introductions rely on technologies that are often subject to strongly contested standards wars. In an attempt to ensure that the technical formats that their products are built upon, are the ones that gain widespread market acceptance...

  3. ACCEPTED FOR PUBLICATION IN THE IEEE/ASME TRANSACTIONS ON MECHATRONICS, OCTOBER 2008 1 The Sensor-based Random Graph Method

    E-Print Network [OSTI]

    ACCEPTED FOR PUBLICATION IN THE IEEE/ASME TRANSACTIONS ON MECHATRONICS, OCTOBER 2008 1 The Sensor. An interesting multi-robot architecture in which robots are guided through the exploration by a market economy

  4. This article has been accepted for inclusion in a future issue of this journal. Content is final as presented, with the exception of pagination. IEEE SYSTEMS JOURNAL 1

    E-Print Network [OSTI]

    Reisslein, Martin

    @mathematik.tu-darmstadt.de). K.-D. Lee and S. G. Kim are with the Research & Standards Department, LG Electronics Mobile Research; revised September 18, 2013; accepted September 23, 2013. This work was supported in part by LG Elec

  5. Building Energy Simulation Test for Existing Homes (BESTEST-EX): Instructions for Implementing the Test Procedure, Calibration Test Reference Results, and Example Acceptance-Range Criteria

    SciTech Connect (OSTI)

    Judkoff, R.; Polly, B.; Bianchi, M.; Neymark, J.; Kennedy, M.

    2011-08-01T23:59:59.000Z

    This publication summarizes building energy simulation test for existing homes (BESTEST-EX): instructions for implementing the test procedure, calibration tests reference results, and example acceptance-range criteria.

  6. Acceptance Test Procedure for Project 251W, WBS 3, Substation A-8, Building 251-W, Bus {number_sign}2 switchgear replacement

    SciTech Connect (OSTI)

    VanBaalen, R.A.

    1995-02-01T23:59:59.000Z

    This document records the steps taken and results of the acceptance testing of the new 13.8kV switchgear installed at 251W. This gear is under the administrative control of Electrical Utilities.

  7. Acceptable Knowledge Summary Report for Mixed TRU Waste Streams: SR-W026-221F-HET-A through D

    SciTech Connect (OSTI)

    Lunsford, G.F.

    2001-10-02T23:59:59.000Z

    This document, along with referenced supporting documents provides a defensible and auditable record of acceptable knowledge for the heterogeneous debris mixed transuranic waste streams generated in the FB-Line after January 25, 1990 and before March 20, 1997.

  8. Acceptable Knowledge Summary Report for Waste Stream: SR-T001-221F-HET/Drums

    SciTech Connect (OSTI)

    Lunsford, G.F.

    1998-10-26T23:59:59.000Z

    Since beginning operations in 1954, the Savannah River Site FB-Line produced Weapons Grade Plutonium for the United States National Defense Program. The facility mission was mainly to process dilute plutonium solution received from the 221-F Canyon into highly purified plutonium metal. As a result of various activities (maintenance, repair, clean up, etc.) in support of the mission, the facility generated a transuranic heterogeneous debris waste stream. Prior to January 25, 1990, the waste stream was considered suspect mixed transuranic waste (based on potential for inclusion of F-Listed solvent rags/wipes) and is not included in this characterization. Beginning January 25, 1990, Savannah River Site began segregation of rags and wipes containing F-Listed solvents thus creating a mixed transuranic waste stream and a non-mixed transuranic waste stream. This characterization addresses the non-mixed transuranic waste stream packaged in 55-gallon drums after January 25, 1990.Characterization of the waste stream was achieved using knowledge of process operations, facility safety basis documentation, facility specific waste management procedures and storage / disposal records. The report is fully responsive to the requirements of Section 4.0 "Acceptable Knowledge" from the WIPP Transuranic Waste Characterization Quality Assurance Plan, CAO-94-1010, and provides a sound, (and auditable) characterization that satisfies the WIPP criteria for Acceptable Knowledge.

  9. Nuclear energy acceptance and potential role to meet future energy demand. Which technical/scientific achievements are needed?

    SciTech Connect (OSTI)

    Schenkel, Roland [European Commission, Joint Research Centre, Institute for Transuranium Elements, Hermann-von-Helmholtz-Platz 1,76344 Eggenstein-Leopoldshafen (Germany)

    2012-06-19T23:59:59.000Z

    25 years after Chernobyl, the Fukushima disaster has changed the perspectives of nuclear power. The disaster has shed a negative light on the independence, reliability and rigor of the national nuclear regulator and plant operator and the usefulness of the international IAEA guidelines on nuclear safety. It has become clear that, in the light of the most severe earthquake in the history of Japan, the plants at Fukushima Daiichi were not adequately protected against tsunamis. Nuclear acceptance has suffered enormously and has changed the perspectives of nuclear energy dramatically in countries that have a very risk-sensitive population, Germany is an example. The paper analyses the reactions in major countries and the expected impact on future deployment of reactors and on R and D activities. On the positive side, the disaster has demonstrated a remarkable robustness of most of the 14 reactors closest to the epicentre of the Tohoku Seaquake although not designed to an event of level 9.0. Public acceptance can only be regained with a rigorous and worldwide approach towards inherent reactor safety and design objectives that limit the impact of severe accidents to the plant itself (like many of the new Gen III reactors). A widespread release of radioactivity and the evacuation (temporary or permanent) of the population up to 30 km around a facility are simply not acceptable. Several countries have announced to request more stringent international standards for reactor safety. The IAEA should take this move forward and intensify and strengthen the different peer review mission schemes. The safety guidelines and peer reviews should in fact become legally binding for IAEA members. The paper gives examples of the new safety features developed over the last 20 years and which yield much safer reactors with lesser burden to the environment under severe accident conditions. The compatibility of these safety systems with the current concepts for fusion-fission hybrids, which have recently been proposed for energy production, is critically reviewed. There are major challenges remaining that are shortly outlined. Scientific/technical achievements that are required in the light of the Fukushima accident are highlighted.

  10. Emerging, Cost-Effective Applications for Desiccant Dehumidification in the U.S.

    E-Print Network [OSTI]

    Witte, M. J.; Kosar, D. R.

    1998-01-01T23:59:59.000Z

    the introduction of drier air. The benefits are similar to the improvements realized in the industrial sector where dry air increases productivity in moisture sensitive manufacturing processes or reduces humidity related losses in storage applications...'s Indoor Air Quality (IAQ). Outside Air Reauirements In the commercial sector today, IAQ equates directly to the quantity of fresh air brought into a building, as prescribed by the 1989 version of ASHRAE Standard 62, "Ventilation for Acceptable Indoor...

  11. Preparation of a soluble antigen from Theileria cervi and its application to various serologic tests

    E-Print Network [OSTI]

    Corry, George Lowry

    2012-06-07T23:59:59.000Z

    . Thirty-four serums obtained from six deer infected with T . cervi were used in the CF and HA tests. Both tests detected the presence of antibody to the parasite . Two precipitin tests; the ring precipitin and the agar gel diffusion tests gave no valid... that of many bacterial diseases where the concept of protective antibody is applicable and accepted . They postulate that the production of the antibody in detectable quantities is dependent on a certain stage of the growth and development cycle...

  12. APPLICATION CONSTRUCTION LEADERSHIP COURSE

    E-Print Network [OSTI]

    Stephens, Graeme L.

    APPLICATION CONSTRUCTION LEADERSHIP COURSE RECOMMENDATION FORM CON464 Construction Leadership: __________________________ To be considered for the Construction Leadership course submit the following: Application with description in the construction industry 5) If your GPA

  13. Applications (Grid Tools)

    E-Print Network [OSTI]

    Buyya, Rajkumar

    Grid Fabric Software Grid Applications Core Grid Middleware User-Level Middleware (Grid Tools) !"# $ %& ' ( ) * #& + '& ' , - . / # ) ) 0 # * 1 PDB CDB Grid Fabric Hardware &+ '' + ) , '1 '1 ' % - * # ( Grid Fabric Software Grid Applications Core Grid Middleware User-Level Middleware (Grid Tools) !"# $ %& ' ( ) * #& + '& ' , - . / # ) ) 0

  14. Dynamic Conic Finance: Pricing and Hedging in Market Models with Transaction Costs via Dynamic Coherent Acceptability Indices

    E-Print Network [OSTI]

    Bielecki, Tomasz R; Iyigunler, Ismail; Rodriguez, Rodrigo

    2012-01-01T23:59:59.000Z

    In this paper we present a theoretical framework for determining dynamic ask and bid prices of derivatives using the theory of dynamic coherent acceptability indices in discrete time. We prove a version of the First Fundamental Theorem of Asset Pricing using the dynamic coherent risk measures. We introduce the dynamic ask and bid prices of a derivative contract in markets with transaction costs. Based on these results, we derive a representation theorem for the dynamic bid and ask prices in terms of dynamically consistent sequence of sets of probability measures and risk-neutral measures. To illustrate our results, we compute the ask and bid prices of some path-dependent options using the dynamic Gain-Loss Ratio.

  15. SLURRY MIX EVAPORATOR BATCH ACCEPTABILITY AND TEST CASES OF THE PRODUCT COMPOSITION CONTROL SYSTEM WITH THORIUM AS A REPORTABLE ELEMENT

    SciTech Connect (OSTI)

    Edwards, T.

    2010-10-07T23:59:59.000Z

    The Defense Waste Processing Facility (DWPF), which is operated by Savannah River Remediation, LLC (SRR), has recently begun processing Sludge Batch 6 (SB6) by combining it with Frit 418 at a nominal waste loading (WL) of 36%. A unique feature of the SB6/Frit 418 glass system, as compared to the previous glass systems processed in DWPF, is that thorium will be a reportable element (i.e., concentrations of elemental thorium in the final glass product greater than 0.5 weight percent (wt%)) for the resulting wasteform. Several activities were initiated based upon this unique aspect of SB6. One of these was an investigation into the impact of thorium on the models utilized in DWPF's Product Composition and Control System (PCCS). While the PCCS is described in more detail below, for now note that it is utilized by Waste Solidification Engineering (WSE) to evaluate the acceptability of each batch of material in the Slurry Mix Evaporator (SME) before this material is passed on to the melter. The evaluation employs models that predict properties associated with processability and product quality from the composition of vitrified samples of the SME material. The investigation of the impact of thorium on these models was conducted by Peeler and Edwards [1] and led to a recommendation that DWPF can process the SB6/Frit 418 glass system with ThO{sub 2} concentrations up to 1.8 wt% in glass. Questions also arose regarding the handling of thorium in the SME batch acceptability process as documented by Brown, Postles, and Edwards [2]. Specifically, that document is the technical bases of PCCS, and while Peeler and Edwards confirmed the reliability of the models, there is a need to confirm that the current implementation of DWPF's PCCS appropriately handles thorium as a reportable element. Realization of this need led to a Technical Task Request (TTR) prepared by Bricker [3] that identified some specific SME-related activities that the Savannah River National Laboratory (SRNL) was requested to conduct. SRNL issued a Task Technical and Quality Assurance (TT&QA) plan [4] in response to the SRR request. The conclusions provided in this report are that no changes need to be made to the SME acceptability process (i.e., no modifications to WSRC-TR-95-00364, Revision 5, are needed) and no changes need to be made to the Product Composition Control System (PCCS) itself (i.e. the spreadsheet utilized by Waste Solidification Engineering (WSE) for acceptability decisions does not require modification) in response to thorium becoming a reportable element for DWPF operations. In addition, the inputs and results for the two test cases requested by WSE for use in confirming the successful activation of thorium as a reportable element for DWPF operations during the processing of SB6 are presented in this report.

  16. Spent fuel disassembly hardware and other non-fuel bearing components: characterization, disposal cost estimates, and proposed repository acceptance requirements

    SciTech Connect (OSTI)

    Luksic, A.T.; McKee, R.W.; Daling, P.M.; Konzek, G.J.; Ludwick, J.D.; Purcell, W.L.

    1986-10-01T23:59:59.000Z

    There are two categories of waste considered in this report. The first is the spent fuel disassembly (SFD) hardware. This consists of the hardware remaining after the fuel pins have been removed from the fuel assembly. This includes end fittings, spacer grids, water rods (BWR) or guide tubes (PWR) as appropriate, and assorted springs, fasteners, etc. The second category is other non-fuel-bearing (NFB) components the DOE has agreed to accept for disposal, such as control rods, fuel channels, etc., under Appendix E of the standard utiltiy contract (10 CFR 961). It is estimated that there will be approximately 150 kg of SFD and NFB waste per average metric ton of uranium (MTU) of spent uranium. PWR fuel accounts for approximately two-thirds of the average spent-fuel mass but only 50 kg of the SFD and NFB waste, with most of that being spent fuel disassembly hardware. BWR fuel accounts for one-third of the average spent-fuel mass and the remaining 100 kg of the waste. The relatively large contribution of waste hardware in BWR fuel, will be non-fuel-bearing components, primarily consisting of the fuel channels. Chapters are devoted to a description of spent fuel disassembly hardware and non-fuel assembly components, characterization of activated components, disposal considerations (regulatory requirements, economic analysis, and projected annual waste quantities), and proposed acceptance requirements for spent fuel disassembly hardware and other non-fuel assembly components at a geologic repository. The economic analysis indicates that there is a large incentive for volume reduction.

  17. PEER ADVISING APPLICATION PACKET

    E-Print Network [OSTI]

    resume and the following application to 203 Peterson by Noon on Friday, October 10, 2014. Name: Student us about yourself? Applications and Resume Due: October 10, 2014 by Noon. Return completed Application & Resume to: Undergraduate Advising Office, 203 Peterson Hall #12;

  18. Application Protocol Reference Architecture Application Protocol Reference Architecture

    E-Print Network [OSTI]

    van Sinderen, Marten

    Application Protocol Reference Architecture 165 Chapter 7 Application Protocol Reference Architecture This chapter proposes an alternative reference architecture for application protocols. The proposed reference architecture consists of the set of possible architectures for application protocols

  19. ERIP application instructions

    SciTech Connect (OSTI)

    Watt, D.M.

    1992-01-02T23:59:59.000Z

    This report provides background information and instructions to assist applicants in writing Energy-Related Inventions Program (ERIP) applications. Initial feedback fro usage for the new instructions shows that the best instructions would not be read and followed by all applicants. Applications from more than thirty applicants who have received the new instructions indicated that few had read the instructions. Based on this feedback, the instructions have been further revised to include a title page and table of contents. A warning was also added to advise applicants of the potential penalty of delayed review if these instructions are not followed. This revision was intended to address the possibility that some applicants did not see or bother to follow the instructions which followed the background information about ERIP. Included are two examples of ERIP applications which have been prepared for handout at workshops or mailing to applicants. Writing of example applications was time consuming and more difficult than expected for several reasons: (1) Full disclosures can be lengthy, very detailed, and technical. This contrasts with the desire to prepare examples which are comparatively short and easy for the non-technical person to read. (2) Disclosures contain confidential information which should not be published. (3) It is difficult to imagine that applicants will study examples when they do not bother to read the basic instructions.

  20. The development of Sn-Li coolant/breeding material for APEX/ALPS applications.

    SciTech Connect (OSTI)

    Sze, D.-K.

    1999-07-08T23:59:59.000Z

    A Sn-Li alloy has been identified to be a coolant/breeding material for D-T fusion applications. The key feature of this material is its very low vapor pressure, which will be very useful for free surface concepts employed in APEX, ALPS and inertial confinement fission. The vapor is dominated by lithium, which has very low Z. Initial assessment of the material indicates acceptable tritium breeding capability, high thermal conductivity, expected low tritium volubility, and expected low chemical reactivities with water and air. Some key concerns are the high activation and material compatibility issues. The initial assessment of this material, for fission applications, is presented in this paper.

  1. Microsoft Word - acceptance

    Broader source: Energy.gov (indexed) [DOE]

    IEEE Standard for Software Life Cycle Processes Organization for Standardization (ISO) ISO 9001 Inroads to Software Quality AHow-to Guide and Tool Kit@ by Alka Jarvis and Vern...

  2. Installation and Acceptance Stage

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-05-21T23:59:59.000Z

    This chapter addresses activities required to install the software, data bases, or data that comprise the software product onto the hardware platform at sites of operation.

  3. TPO's Acceptance Report

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security AdministrationcontrollerNanocrystallineForeign Object DamageSystemsU.S.Energy InnovationTOj

  4. Acceptable NSLS Safety Documentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAbout the Building Technologies Office Workshop WorkingAccelerators

  5. Technical applications of aerogels

    SciTech Connect (OSTI)

    Hrubesh, L.W.

    1997-08-18T23:59:59.000Z

    Aerogel materials posses such a wide variety of exceptional properties that a striking number of applications have developed for them. Many of the commercial applications of aerogels such as catalysts, thermal insulation, windows, and particle detectors are still under development and new application as have been publicized since the ISA4 Conference in 1994: e.g.; supercapacitors, insulation for heat storage in automobiles, electrodes for capacitive deionization, etc. More applications are evolving as the scientific and engineering community becomes familiar with the unusual and exceptional physical properties of aerogels, there are also scientific and technical application, as well. This paper discusses a variety of applications under development at Lawrence Livermore National Laboratory for which several types of aerogels are formed in custom sizes and shapes. Particular discussions will focus on the uses of aerogels for physics experiments which rely on the exceptional, sometimes unique, properties of aerogels.

  6. Space Science and Applications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 Space Science and Applications Applying world-class expertise in space sciences and associated technologies to detect and characterize national security threats Contacts Group...

  7. Computational Optimization and Applications

    E-Print Network [OSTI]

    15

    2015-04-02T23:59:59.000Z

    Pitman Advanced Publishing Program, Boston, 1984. [10] M. Hanke, Regularizing Levenberg-Marquardt scheme, with applications to inverse groundwater. 19. 1.

  8. Application of solar energy.

    E-Print Network [OSTI]

    Li, Jingcheng

    2010-01-01T23:59:59.000Z

    ??The purpose of the project is to learn the principle and application of solar energy and to know the situation of solar energy in China… (more)

  9. Application Power Signature Analysis

    SciTech Connect (OSTI)

    Hsu, Chung-Hsing [ORNL] [ORNL; Combs, Jacob [Sonoma State University] [Sonoma State University; Nazor, Jolie [Sonoma State University] [Sonoma State University; Santiago, Fabian [Sonoma State University] [Sonoma State University; Thysell, Rachelle [Sonoma State University] [Sonoma State University; Rivoire, Suzanne [Sonoma State University] [Sonoma State University; Poole, Stephen W [ORNL] [ORNL

    2014-01-01T23:59:59.000Z

    The high-performance computing (HPC) community has been greatly concerned about energy efficiency. To address this concern, it is essential to understand and characterize the electrical loads of HPC applications. In this work, we study whether HPC applications can be distinguished by their power-consumption patterns using quantitative measures in an automatic manner. Using a collection of 88 power traces from 4 different systems, we find that basic statistical measures do a surprisingly good job of summarizing applications' distinctive power behavior. Moreover, this study opens up a new area of research in power-aware HPC that has a multitude of potential applications.

  10. On the public perception of the risks from nuclear weapons: Would oralloy be more acceptable than plutonium?

    SciTech Connect (OSTI)

    Kunsman, D.M.

    1993-03-01T23:59:59.000Z

    We technologists generally only address risk magnitudes in our analyses, although other studies have found nineteen additional dimensions for the way the public perceives risk. These include controllability, voluntariness, catastrophic potential, and trust in the institution putting forth the risk. We and the geneml public use two different languages, and to understand what their concerns are, we need to realize that the culture surrounding nuclear weapons is completely alien to the general public. Ultimately, the acceptability of a risk is a values question, not a technical question. For most of the risk dimensions, the public would perceive no significant difference between using oralloy and plutonium. This does not mean that the suggested design change should not be proposed, only that the case for, or against, it be made comprehensively using the best information available today. The world has changed: the ending of the cold war has decreased the benefit of nuclear weapons in the minds of the public and the specter of Chernobyl has increased the perceived risks of processes that use radioactive materials. Our analyses need to incorporate the lessons pertinent to this newer world.

  11. On the public perception of the risks from nuclear weapons: Would oralloy be more acceptable than plutonium

    SciTech Connect (OSTI)

    Kunsman, D.M.

    1993-03-01T23:59:59.000Z

    We technologists generally only address risk magnitudes in our analyses, although other studies have found nineteen additional dimensions for the way the public perceives risk. These include controllability, voluntariness, catastrophic potential, and trust in the institution putting forth the risk. We and the geneml public use two different languages, and to understand what their concerns are, we need to realize that the culture surrounding nuclear weapons is completely alien to the general public. Ultimately, the acceptability of a risk is a values question, not a technical question. For most of the risk dimensions, the public would perceive no significant difference between using oralloy and plutonium. This does not mean that the suggested design change should not be proposed, only that the case for, or against, it be made comprehensively using the best information available today. The world has changed: the ending of the cold war has decreased the benefit of nuclear weapons in the minds of the public and the specter of Chernobyl has increased the perceived risks of processes that use radioactive materials. Our analyses need to incorporate the lessons pertinent to this newer world.

  12. Laboratories for the 21st Century: Best Practices; Modeling Exhaust Dispersion for Specifying Acceptable Exhaust/Intake Design (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-09-01T23:59:59.000Z

    This guide provides general information on specifying acceptable exhaust and intake designs. It also provides various quantitative approaches that can be used to determine expected concentration levels resulting from exhaust system emissions. In addition, the guide describes methodologies that can be employed to operate laboratory exhaust systems in a safe and energy efficient manner by using variable air volume (VAV) technology. The guide, one in a series on best practices for laboratories, was produced by Laboratories for the 21st Century (Labs21), a joint program of the U.S. Environmental Protection Agency (EPA) and the U.S. Department of Energy (DOE). Geared toward architects, engineers, and facility managers, the guides contain information about technologies and practices to use in designing, constructing, and operating safe, sustainable, high-performance laboratories. Studies show a direct relationship between indoor air quality and the health and productivity of building occupants. Historically, the study and protection of indoor air quality focused on emission sources emanating from within the building. For example, to ensure that the worker is not exposed to toxic chemicals, 'as manufactured' and 'as installed' containment specifications are required for fume hoods. However, emissions from external sources, which may be re-ingested into the building through closed circuiting between the building's exhaust stacks and air intakes, are an often overlooked aspect of indoor air quality.

  13. Received 14 Aug 2013 | Accepted 8 Sep 2014 | Published 13 Oct 2014 Improving battery safety by early detection of

    E-Print Network [OSTI]

    Cui, Yi

    Stanford Institute for Materials and Energy Sciences, SLAC National Accelerator Laboratory, 2575 Sand Hill and show great promise for emerging applications in transportation and wind­solar-grid energy storage report a new strategy for improving safety by designing a smart battery that allows internal battery

  14. Accepted to SPIE DSS Conference April 29-May 3, 2013, Baltimore, MD Terahertz atmospheric attenuation and continuum effects

    E-Print Network [OSTI]

    Massachusetts at Lowell, University of

    Terahertz atmospheric attenuation and continuum effects David M. Slocum,*a Thomas M. Goyette,a Elizabeth J interest in the terahertz frequency region. Applications such as pollution monitoring and detection of energetic chemicals are of particular interest. Although there has been much attention to atmospheric

  15. In press on Aquatic Sciences (paper accepted on 5th Buffagni et al., in press. The lentic lotic character of rivers and aquatic invertebrates

    E-Print Network [OSTI]

    Armanini, David G

    In press on Aquatic Sciences (paper accepted on 5th May 2009) Buffagni et al., in press. The lentic-lotic character of rivers and aquatic invertebrates Key-words: Mediterranean rivers, Hydraulic habitat, LIFE index to identify the character of a river site in terms of local hydraulic conditions. Information about

  16. Facilities Executive Vice President Joe Ienuso accepted the Energy New York Award for Leadership on behalf of the University. Read more on page 8.

    E-Print Network [OSTI]

    Qian, Ning

    Facilities Executive Vice President Joe Ienuso accepted the Energy New York Award for Leadership on behalf of the University. Read more on page 8. UNIVERSITY RECEIVES ENERGY NEW YORK LEADERSHIP AWARD], As time to renew my rental agreement approaches, I would like to take this opportunity to tell you how

  17. Annual Proceedings of Vidzeme University of Applied Sciences "ICTE in Regional Development", 2009/2010 INTRODUCTION TO TECHNOLOGIES ACCEPTANCE AND SUSTAINABILITY

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    and sustainability assessment is vital for technology developers and investors in the decision making process becauseAnnual Proceedings of Vidzeme University of Applied Sciences "ICTE in Regional Development", 2009/2010 61 INTRODUCTION TO TECHNOLOGIES ACCEPTANCE AND SUSTAINABILITY MODELLING Zane Barkane, Egils Ginters

  18. The production and utilization of a clean, abundant, and renewable energy source is widely accepted as one of the key challenges facing mankind today. Population

    E-Print Network [OSTI]

    Bruck, Jehoshua (Shuki)

    The production and utilization of a clean, abundant, and renewable energy source is widely accepted-splitter and may one day be used as a source of clean energy.The components include (a) Membrane assembly of underdeveloped nations will increase our current demand for energy. Although fossil fuels may power the planet

  19. Ad Hoc Sample Policy Accepting Samples from Private Citizens or NGOs. Our lab works with over 50 different partners across the political spectrum. One reason

    E-Print Network [OSTI]

    Ad Hoc Sample Policy ­ Accepting Samples from Private Citizens or NGOs. Our lab works with over 50 have enacted the following laboratory policy: All ad hoc samples (i.e., samples not part of an ongoing ask that if anyone is submitting an ad hoc sample to the lab they use the chain of custody form found

  20. ACCEPTED VERSION, IEEE TRANSACTIONS ON ROBOTICS. THE FINAL PUBLICATION IS AVAILABLE AT IEEEXPLORE.IEEE.ORG 1 On Cooperative Patrolling: Optimal Trajectories,

    E-Print Network [OSTI]

    ACCEPTED VERSION, IEEE TRANSACTIONS ON ROBOTICS. THE FINAL PUBLICATION IS AVAILABLE AT IEEEXPLORE algorithm for its computation. Then, we describe a distributed procedure that steers the robots toward refresh time problem, under the technical assumption of a constant number of robots involved

  1. ACCEPTED VERSION, IEEE TRANSACTIONS ON ROBOTICS. THE FINAL PUBLICATION IS AVAILABLE AT IEEEXPLORE.IEEE.ORG 1 Bilateral Teleoperation of Groups of Mobile Robots

    E-Print Network [OSTI]

    ACCEPTED VERSION, IEEE TRANSACTIONS ON ROBOTICS. THE FINAL PUBLICATION IS AVAILABLE AT IEEEXPLORE.IEEE.ORG 1 Bilateral Teleoperation of Groups of Mobile Robots with Time-Varying Topology Antonio Franchi strategy for bilaterally teleoperating heterogeneous groups of mobile robots from different domains (aerial

  2. ACCEPTED VERSION, IEEE TRANSACTIONS ON ROBOTICS. THE FINAL PUBLICATION IS AVAILABLE AT IEEEXPLORE.IEEE.ORG 1 Simultaneous Calibration of Odometry

    E-Print Network [OSTI]

    ACCEPTED VERSION, IEEE TRANSACTIONS ON ROBOTICS. THE FINAL PUBLICATION IS AVAILABLE AT IEEEXPLORE.IEEE.ORG 1 Simultaneous Calibration of Odometry and Sensor Parameters for Mobile Robots Andrea Censi, Member--Consider a differential-drive mobile robot equipped with an on-board exteroceptive sensor that can estimate its own motion

  3. Acceptance of Soil from Off Site Sources In order to guard against receiving contaminated soils to used as fill material on campus,

    E-Print Network [OSTI]

    de Lijser, Peter

    this guideline document in order to provide information for acceptance of clean imported fill material from off regulations governing the remediation of site, and hazardous chemical disposal. Local Oversight Program Agency, auto repair facilities and sites containing petroleum impacted soils and disposal and transportation

  4. Forest Certification Standards From Around The World Weigh In As Global Pressure Mounts for US Green Building Council to Accept Multiple

    E-Print Network [OSTI]

    recognition to one forest certification brand, green building standards may help drive demand for these brandsForest Certification Standards From Around The World Weigh In As Global Pressure Mounts for US Green Building Council to Accept Multiple Forest Certification Programs Thursday, 22 July 2010 Forest

  5. The CanTEST is a test of English proficiency which is accepted at many universities, including the University of Saskatchewan.

    E-Print Network [OSTI]

    Saskatchewan, University of

    CanTEST The CanTEST is a test of English proficiency which is accepted at many universities, including the University of Saskatchewan. The CanTEST is offered four times a year. Full-Time English.966.4351 for placement testing. · A non-refundable fee of $10.00 will be charged for placement testing. · Full payment

  6. Accepted for Presentation at IEEE Power Engineering Society 2006 General Meeting, Montreal , Quebec, June 18-22, 2006 Abstract--This paper presents experimental results associated

    E-Print Network [OSTI]

    if it is better, at least in some way, than the existing 2D approaches at helping people understand the powerAccepted for Presentation at IEEE Power Engineering Society 2006 General Meeting, Montreal , Quebec aspects of using three-dimensional (3D) visualizations to display electric power system generation

  7. Accepted for publication in Energy Policy Greenhouse-gas Emissions from Solar Electric-and Nuclear Power: A Life-cycle

    E-Print Network [OSTI]

    Accepted for publication in Energy Policy Greenhouse-gas Emissions from Solar Electric- and Nuclear, photovoltaic, nuclear, life cycle 1 #12;Introduction The production of energy by burning fossil fuels generates, it is envisioned that expanding generation technologies based on nuclear power and renewable energy sources would

  8. 3D-FRET Microscopy 0 This un-edited manuscript has been accepted for publication in Biophysical Journal and is freely

    E-Print Network [OSTI]

    Kirschner, Denise

    3D-FRET Microscopy 0 This un-edited manuscript has been accepted for publication in Biophysical of the paper may be found at http://www.biophysj.org. 3D-FRET Reconstruction Microscopy for Analysis of Dynamic.1529/biophysj.107.125385 Copyright 2008 by The Biophysical Society. #12;3D-FRET Microscopy 1 Abstract Analysis

  9. Beef acceptability as rated by a panel of families and the Warner-Bratzler shear, using loin steaks and chuck roasts from cattle of known history

    E-Print Network [OSTI]

    King, G. T. (General Tye)

    1958-01-01T23:59:59.000Z

    ........................................ . 6 Consumer Studies .................... ........... .. 11 EXPERIMENTAL PROCEDURE.......................................... .. 18 S a m p l i n g ..........................................................18 Foods L a b o r a t o r y... u r c e ............. ............... .............. .. 57 Table Page 8. Mean Squares for Influence of Animals Upon Eating Accept? ability of Left and Right Loin Steaks and Chuck Roasts . . . . 58 9. Mean Squares for Influence of Families Upon...

  10. National Wetlands Inventory The U.S. Army Corps of Engineers (Corps) as of 2006 has accepted the administrative responsibility for

    E-Print Network [OSTI]

    US Army Corps of Engineers

    National Wetlands Inventory The U.S. Army Corps of Engineers (Corps) as of 2006 has accepted the administrative responsibility for the National Wetland Plant List from the U.S. Fish and Wildlife Service (FWS). In early 2009 the FWS removed the published 1988 and 1996 wetland plant lists from their National Wetland

  11. P-wave re ections in 3-D model of coal basin with boulders (has been accepted for poster presentation at EAGE conference, Leipzig 1998)

    E-Print Network [OSTI]

    Cerveny, Vlastislav

    P-wave re ections in 3-D model of coal basin with boulders (has been accepted for poster to the computation of re ections in 3-D model of coal basin with four boulders located in the upper bed of the coal. Tselentis, pers. comm.). The model is composed of a low velocity layer, upper bed, four boulders, coal seam

  12. This is a pre-print version of the article: Demetriadis et al. (2003) Cultures in Negotiation: Teachers' Acceptance/Resistance Attitudes Considering the Infusion of Technology into Schools, Computers &

    E-Print Network [OSTI]

    Boyer, Edmond

    : Teachers' Acceptance/Resistance Attitudes Considering the Infusion of Technology into Schools, Computers the Infusion of Technology into Schools Demetriadis, S.1* , Barbas, A.** , Molohides, A.** , Palaigeorgiou, G

  13. Wind energy applications guide

    SciTech Connect (OSTI)

    anon.

    2001-01-01T23:59:59.000Z

    The brochure is an introduction to various wind power applications for locations with underdeveloped transmission systems, from remote water pumping to village electrification. It includes an introductory section on wind energy, including wind power basics and system components and then provides examples of applications, including water pumping, stand-alone systems for home and business, systems for community centers, schools, and health clinics, and examples in the industrial area. There is also a page of contacts, plus two specific example applications for a wind-diesel system for a remote station in Antarctica and one on wind-diesel village electrification in Russia.

  14. MSW Application Checklist IMPORTANT NOTES

    E-Print Network [OSTI]

    Northern British Columbia, University of

    MSW Application Checklist IMPORTANT NOTES 1. Please submit all Application Materials and Fees SUBMIT Application for Admission to Graduate Studies Statement of Academic Interests (1-2 pages) MSW

  15. Heat Pumps - Theory and Applications

    E-Print Network [OSTI]

    Altin, M.

    1982-01-01T23:59:59.000Z

    compressors (heat pumps) with actual applications in Monsanto. Guidelines for possible application areas are drawn from the analysis, and conclusions are drawn both about the usefulness of exergy analysis and about the heat pump application areas....

  16. OPS Application Requisition #: Job Title

    E-Print Network [OSTI]

    Mazzotti, Frank

    to my application and resume. I certify that the application and/or resume submitted are a complete statements or omissions made by me on this form, my application, my resume, or any supplementary

  17. Neutron sources and applications

    SciTech Connect (OSTI)

    Price, D.L. [ed.] [Argonne National Lab., IL (United States); Rush, J.J. [ed.] [National Inst. of Standards and Technology, Gaithersburg, MD (United States)

    1994-01-01T23:59:59.000Z

    Review of Neutron Sources and Applications was held at Oak Brook, Illinois, during September 8--10, 1992. This review involved some 70 national and international experts in different areas of neutron research, sources, and applications. Separate working groups were asked to (1) review the current status of advanced research reactors and spallation sources; and (2) provide an update on scientific, technological, and medical applications, including neutron scattering research in a number of disciplines, isotope production, materials irradiation, and other important uses of neutron sources such as materials analysis and fundamental neutron physics. This report summarizes the findings and conclusions of the different working groups involved in the review, and contains some of the best current expertise on neutron sources and applications.

  18. web identity application sectioneleven

    E-Print Network [OSTI]

    Derisi, Joseph

    web identity application sectioneleven 99 contents elements of webpage design......................................................................... 100-101 web development and design considerations web banners is required for all official UCSF webpages. This banner includes a required link

  19. The ILC P2 Marx and Application of the Marx Topology to Future Accelerators

    SciTech Connect (OSTI)

    Kemp, M.A.; Benwell, A.; Burkhart, C.; Hugyik, J.; Larsen, R.; Macken, K.; MacNair, D.; Nguyen, M.; Olsen, J.; /SLAC

    2011-08-19T23:59:59.000Z

    The SLAC P2 Marx is under development as the linac klystron modulator for the ILC. This modulator builds upon the success of the P1 Marx, which is currently undergoing lifetime evaluation. While the SLAC P2 Marx's (henceforth, 'P2 Marx') target application is the ILC, characteristics of the Marx topology make it equally well-suited for operation at different parameter ranges; for example, increased pulse repetition frequency, increased output current, longer pulse width, etc. Marx parameters such as the number of cells, cell capacitance, and component selection can be optimized for the application. This paper provides an overview of the P2 Marx development. In addition, the scalability of the Marx topology to other long-pulse parameter ranges is discussed.

  20. Electrical characterization of electrophoretically coated aluminum samples for photovoltaic concentrator application

    SciTech Connect (OSTI)

    Sugimura, R.S.; Mon, G.R.; Ross, R.G. Jr. [Jet Propulsion Lab., Pasadena, CA (United States)

    1992-10-01T23:59:59.000Z

    The practicality of using a thin-film styrene/acrylate copolymer electrophoretic coating to isolate concentrator cells electrically from their surroundings in a photovoltaic concentrator module is assessed. Only the electrical isolation problem was investigated. The approach was to subject various types of EP-coated aluminum specimens to electrical stress testing and to aging tests while monitoring coating electrical resistivity properties. It was determined that, in general, longer processing times--i.e., thicker electrophoretic layers--resulted in better voltage-withstand properties. In particular, a two-minute processing time seemed sufficient to provide the electrical isolation required in photovoltaic concentrator application applications. Even though electrophoretic coatings did not seem to fill voids in porous-anodized aluminum substrates, breakdown voltages generally exceeded hi-pot pass-fail voltage levels with a comfortable margin. 6 refs, 11 figs, 5 tabs.

  1. Acceptance testing of the eddy current probes for measurement of aluminum hydroxide coating thickness on K West Basin fuel elements

    SciTech Connect (OSTI)

    Pitner, A.L.

    1998-08-21T23:59:59.000Z

    During a recent visual inspection campaign of fuel elements stored in the K West Basin, it was noted that fuel elements contained in sealed aluminum canisters had a heavy translucent type coating on their surfaces (Pitner 1997a). Subsequent sampling of this coating in a hot cell (Pitner 1997b) and analysis of the material identified it as aluminum hydroxide. Because of the relatively high water content of this material, safety related concerns are raised with respect to long term storage of this fuel in Multi-Canister Overpacks (MCOs). A campaign in the basin is planned to demonstrate whether this coating can be removed by mechanical brushing (Bridges 1998). Part of this campaign involves before-and-after measurements of the coating thickness to determine the effectiveness of coating removal by the brushing machine. Measurements of the as-deposited coating thickness on multiple fuel elements are also expected to provide total coating inventory information needed for MCO safety evaluations. The measurement technique must be capable of measuring coating thicknesses on the order of several mils, with a measurement accuracy of 0.5 mil. Several different methods for quantitatively measuring these thin coatings were considered in selecting the most promising approach. Ultrasonic measurement was investigated, but it was determined that due to the thin coating depth and the high water content of the material, the signal would likely pass directly through to the cladding without ever sensing the coating surface. X-ray fluorescence was also identified as a candidate technique, but would not work because the high gamma background from the irradiated fuel would swamp out the low energy aluminum signal. Laser interferometry could possibly be applied, but considerable development would be required and it was considered to be high risk on a short term basis. The consensus reached was that standard eddy current techniques for coating thickness measurement had the best chance for success in this endeavor. If proper placement and alignment of the eddy current measurement probe on the coating could be achieved, the thickness of this non-conductive coating over the conductive fuel cladding (Zircaloy 2) should be measurable based on magnetic stand-off aspects. Eddy current devices are routinely used to measure paint coating thicknesses on metal surfaces in this regard. The purpose of this report is to document the development and acceptance testing of the eddy current system conducted to qualify its use for the measurement of aluminum hydroxide coating thicknesses on fuel stored in the K West Basin.

  2. Applications of cavity optomechanics

    SciTech Connect (OSTI)

    Metcalfe, Michael [Booz Allen Hamilton, 3811 Fairfax Drive, Arlington, Virginia 22203 (United States)

    2014-09-15T23:59:59.000Z

    “Cavity-optomechanics” aims to study the quantum properties of mechanical systems. A common strategy implemented in order to achieve this goal couples a high finesse photonic cavity to a high quality factor mechanical resonator. Then, using feedback forces such as radiation pressure, one can cool the mechanical mode of interest into the quantum ground state and create non-classical states of mechanical motion. On the path towards achieving these goals, many near-term applications of this field have emerged. After briefly introducing optomechanical systems and describing the current state-of-the-art experimental results, this article summarizes some of the more exciting practical applications such as ultra-sensitive, high bandwidth accelerometers and force sensors, low phase noise x-band integrated microwave oscillators and optical signal processing such as optical delay-lines, wavelength converters, and tunable optical filters. In this rapidly evolving field, new applications are emerging at a fast pace, but this article concentrates on the aforementioned lab-based applications as these are the most promising avenues for near-term real-world applications. New basic science applications are also becoming apparent such as the generation of squeezed light, testing gravitational theories and for providing a link between disparate quantum systems.

  3. Savannah River Site Waste Isolation Pilot Plant Disposal Program - Acceptable Knowledge Summary Report for Waste Stream: SR-T001-221-HET

    SciTech Connect (OSTI)

    Lunsford, G.F.

    2001-01-24T23:59:59.000Z

    This document, along with referenced supporting documents provides a defensible and auditable record of acceptable knowledge for one of the waste streams from the FB-Line. This heterogeneous debris transuranic waste stream was generated after January 25, 1990 and before March 20, 1997. The waste was packaged in 55-gallon drums, then shipped to the transuranic waste storage facility in ''E'' area of the Savannah River Site. This acceptable knowledge report includes information relating to the facility's history, configuration, equipment, process operations and waste management practices. Information contained in this report was obtained from numerous sources including: facility safety basis documentation, historical document archives, generator and storage facility waste records and documents, and interviews with cognizant personnel.

  4. EA-1977: Acceptance and Disposition of Used Nuclear Fuel Containing U.S.-Origin Highly Enriched Uranium from the Federal Republic of Germany

    Broader source: Energy.gov [DOE]

    This environmental assessment (EA) will evaluate the potential environmental impacts of a DOE proposal to accept used nuclear fuel from the Federal Republic of Germany at DOE’s Savannah River Site (SRS) for processing and disposition. This used nuclear fuel is composed of kernels containing thorium and U.S.-origin highly enriched uranium (HEU) embedded in small graphite spheres that were irradiated in nuclear reactors used for research and development purposes.

  5. A FRAMEWORK TO DEVELOP FLAW ACCEPTANCE CRITERIA FOR STRUCTURAL INTEGRITY ASSESSMENT OF MULTIPURPOSE CANISTERS FOR EXTENDED STORAGE OF USED NUCLEAR FUEL

    SciTech Connect (OSTI)

    Lam, P.; Sindelar, R.; Duncan, A.; Adams, T.

    2014-04-07T23:59:59.000Z

    A multipurpose canister (MPC) made of austenitic stainless steel is loaded with used nuclear fuel assemblies and is part of the transfer cask system to move the fuel from the spent fuel pool to prepare for storage, and is part of the storage cask system for on-site dry storage. This weld-sealed canister is also expected to be part of the transportation package following storage. The canister may be subject to service-induced degradation especially if exposed to aggressive environments during possible very long-term storage period if the permanent repository is yet to be identified and readied. Stress corrosion cracking may be initiated on the canister surface in the welds or in the heat affected zone because the construction of MPC does not require heat treatment for stress relief. An acceptance criteria methodology is being developed for flaw disposition should the crack-like defects be detected by periodic Inservice Inspection. The external loading cases include thermal accident scenarios and cask drop conditions with the contribution from the welding residual stresses. The determination of acceptable flaw size is based on the procedure to evaluate flaw stability provided by American Petroleum Institute (API) 579 Fitness-for-Service (Second Edition). The material mechanical and fracture properties for base and weld metals and the stress analysis results are obtained from the open literature such as NUREG-1864. Subcritical crack growth from stress corrosion cracking (SCC), and its impact on inspection intervals and acceptance criteria, is not addressed.

  6. HLW Return from France to Germany - 15 Years of Experience in Public Acceptance and Technical Aspects - 12149

    SciTech Connect (OSTI)

    Graf, Wilhelm [GNS Gesellschaft fuer Nuklear-Service mbH, 45127 Essen (Germany)

    2012-07-01T23:59:59.000Z

    Since in 1984 the national reprocessing concept was abandoned the reprocessing abroad was the only existing disposal route until 1994. With the amendment of the Atomic Energy Act in 2001 spent fuel management changed completely since from 1 June 2005 any delivery of spent fuel to reprocessing plants was prohibited and the direct disposal of spent fuel became mandatory. Until 2005 the total amount of spent fuel to be reprocessed abroad added up to 6080 t HM, 5309 t HM thereof in France. The waste generated from reprocessing - alternatively an equivalent amount of radioactive material - has to be returned to the country of origin according to the commercial contracts signed between the German utilities and COGEMA, now AREVA NC, in France and BNFL, now INS in UK. In addition the German and the French government exchanged notes with the obligation of both sides to enable and support the return of reprocessing residues or equivalents to Germany. The return of high active vitrified waste from La Hague to the interim storage facility at Gorleben was demanding from the technical view i. e. the cask design and the transport. Unfortunately the Gorleben area served as a target for nuclear opponents from the first transport in 1996 to the latest one in 2011. The protection against sabotage of the railway lines and mass protests needed highly improved security measures. In France and Germany special working forces and projects have been set up to cope with this extraordinary situation. A complex transport organization was established to involve all parties in line with the German and French requirements during transport. The last transport of vitrified residues from France has been completed successfully so far thus confirming the efficiency of the applied measures. Over 15 years there was and still is worldwide no comparable situation it is still unique. Summing up, the exceptional project handling challenge that resulted from the continuous anti-nuclear civil disobedience in Germany over the whole 15-year long project running time could be faced efficiently. It has to be concluded that despite of all problems the anti-nuclear activities have caused so far, all transports of vitrified HLW have always been completed successfully by adapting the commonly established safety, security and public acceptance measures to the special conditions and needs in Germany and coordinating the activities of all parties involved but at the expense of high costs for industry and government and a challenging operational complexity. Apart from an anticipatory project planning a good communication between all involved industrial parties and the French and the German government was the key to the effective management of such shipments and to minimize the radiological, economic, environmental, public and political impact. The future will show how efficiently the gained experience can be used for further return projects which are to be realized since no reprocessed waste has yet been returned from UK and neither the medium-level nor the low-level radioactive waste has been transferred from France to Germany. (author)

  7. Building Facebook Application using Python

    E-Print Network [OSTI]

    Wu, S. Felix

    Building Facebook Application using Python ECS-15, Fall 2010 Prantik Bhattacharyya #12;· Farmville ­ Game ­ 57.5m users ­ http://www.facebook.com/FarmVille · Causes ­ Issues/Movement ­ 26.4m users ­ http://www.facebook.com/causes Facebook Applications #12;Outline · Facebook Applications · Writing Applications · Development

  8. Energy optimization of water and wastewater management for municipal and industrial applications conference

    SciTech Connect (OSTI)

    Not Available

    1980-08-01T23:59:59.000Z

    These proceedings document the presentations given at the Energy Optimization of Water and Wastewater Management for Municipal and Industrial Applications, Conference, sponsored by the Department of Energy (DOE). The conference was organized and coordinated by Argonne National Laboratory. The conference focused on energy use on conservation in water and wastewater. The General Session also reflects DOE's commitment to the support and development of waste and wastewater systems that are environmentally acceptable. The conference proceedings are divided into two volumes. Volume 1 contains the General Session and Sessions 1 to 5. Volume 2 covers Sessions 6 to 12. Separate abstracts are prepared for each item within the scope of the Energy Data Base.

  9. STUDENT TRAVEL POLICY APPLICABILITY

    E-Print Network [OSTI]

    Fernandez, Eduardo

    STUDENT TRAVEL POLICY APPLICABILITY The student travel policy is subject to the standardized the following funding sources: Activity and Services (A & S) fees, Revenues, and Auxiliary fund. The student travel policy incorporates by reference in the University Regulation 4.006 Student Government and Student

  10. Undergraduate Application and Scholarships

    E-Print Network [OSTI]

    Sherrill, David

    with Professor Nils Kroger, studying new materials made by microalgae for use in nano- technological applications such as biotechnology, renewable energy, nanotechnology, modern pharmaceuticals, environmental concerns, and forensics, which play central roles in the nation's health, nutrition, security, energy generation, and economy

  11. DATABASE SECURITY APPLICATIONS

    E-Print Network [OSTI]

    Sandhu, Ravi

    DATABASE SECURITY #12;APPLICATIONS #12;Polyinstantiation for Cover Stories Ravi S. Sandhu and Sushil Jajodia* Center for Secure Information Systems & Department of Information and Software Systems Engineering George Mason University Falffax, VA 22030, USA emaih {sandhu, jajodia}Qsitevax.gmu.edu Abstract

  12. Introducing Web Application Development

    E-Print Network [OSTI]

    Ding, Wei

    Introducing Web Application Development Instructor: Dr Wei Ding Development Instructor: Dr.Wei Ding Fall 2009 1CS 437/637 Database-BackedWeb Sites andWeb Services Introduction: Internet vs. World Wide Web Internet is an interconnected network of thousands ofInternet is an interconnected network

  13. Permit application modifications

    SciTech Connect (OSTI)

    NONE

    1995-11-01T23:59:59.000Z

    This document contains the Permit Application Modifications for the Y-12 Industrial Landfill V site on the Oak Ridge Reservation. These modifications include the assessment of stability of the proposed Landfill V under static and loading conditions. Analyses performed include the general slope stability, veneer stability of the bottom liner and cover system, and a liquefaction potential assessment of the foundation soils.

  14. APPLICATION PRESIDENTIAL INTERNSHIP

    E-Print Network [OSTI]

    Tipple, Brett

    APPLICATION PRESIDENTIAL INTERNSHIP IN HIGHER EDUCATION 2012-2013 The Presidential Internship perspective. The Presidential Internship in Higher Education program is looking for a small, diverse group and community leaders. To qualify for this internship, a student must: 1. Exhibit an interest in higher

  15. Applied Statistics: Modern Applications

    E-Print Network [OSTI]

    Burton, Geoffrey R.

    Real-time vehicle tracking Pollution levels Medical and genetic information .... Saturday, 5 February-time vehicle tracking Pollution levels Medical and genetic information .... Saturday, 5 February 2011 #12 · Advertising · ... Saturday, 5 February 2011 #12;Saturday, 5 February 2011 #12;Modern Application Areas

  16. INDUSTRIAL AND BIOMEDICAL APPLICATIONS

    E-Print Network [OSTI]

    Purvis, Richard

    INDUSTRIAL AND BIOMEDICAL APPLICATIONS Frank Smith, Nicholas Ovenden and Richard Purvis University are described, one industrial on violent water-air interaction during an impact process and the other biomedical: industrial, biomedical, impacts, networks, theory, computation, scales. 1. INTRODUCTION It is a pleasure

  17. High-Efficiency Resonant RF Spin Rotator with Broad Phase Space Acceptance for Pulsed Polarized Cold Neutron Beams

    E-Print Network [OSTI]

    P. -N. Seo; L. Barron-Palos; J. D. Bowman; T. E. Chupp; C. Crawford; M. Dabaghyan; M. Dawkins; S. J. Freedman; T. Gentile; M. T. Gericke; R. C. Gillis; G. L. Greene; F. W. Hersman; G. L. Jones; M. Kandes; S. Lamoreaux; B. Lauss; M. B. Leuschner; R. Mahurin; M. Mason; J. Mei; G. S. Mitchell; H. Nann; S. A. Page; S. I. Penttila; W. D. Ramsay; A. Salas Bacci; S. Santra; M. Sharma; T. B. Smith; W. M. Snow; W. S. Wilburn; H. Zhu

    2007-10-15T23:59:59.000Z

    We have developed a radio-frequency resonant spin rotator to reverse the neutron polarization in a 9.5 cm x 9.5 cm pulsed cold neutron beam with high efficiency over a broad cold neutron energy range. The effect of the spin reversal by the rotator on the neutron beam phase space is compared qualitatively to RF neutron spin flippers based on adiabatic fast passage. The spin rotator does not change the kinetic energy of the neutrons and leaves the neutron beam phase space unchanged to high precision. We discuss the design of the spin rotator and describe two types of transmission-based neutron spin-flip efficiency measurements where the neutron beam was both polarized and analyzed by optically-polarized 3He neutron spin filters. The efficiency of the spin rotator was measured to be 98.0+/-0.8% on resonance for neutron energies from 3.3 to 18.4 meV over the full phase space of the beam. As an example of the application of this device to an experiment we describe the integration of the RF spin rotator into an apparatus to search for the small parity-violating asymmetry A_gamma in polarized cold neutron capture on para-hydrogen by the NPDGamma collaboration at LANSCE.

  18. Treatment of Irradiated Graphite to meet Acceptance Criteria for Waste Disposal: A New IAEA Collaborative Research Program - 12443

    SciTech Connect (OSTI)

    Wickham, A.J. [Nuclear Technology Consultancy, PO Box 50, Builth Wells, Powys LD2 3XA (United Kingdom); Drace, Z. [Waste Technology Section, Division of Nuclear Fuel Cycle and Waste Technology, International Atomic Energy Agency, Wagramerstrasse 5, PO Box 100, A-1400, Vienna (Austria)

    2012-07-01T23:59:59.000Z

    World-wide, more than 250,000 tonnes of irradiated graphite have arisen through commercial nuclear-power operations and from military production reactors. Whilst most nations responsible for the generation of this material have in mind repository disposal alongside other radwaste, the lack of progress in this regard has led in some cases to difficulties where, for example, the site of an existing graphite-moderated reactor is required for re-utilisation. In any case, graphite as a radwaste stream has unique chemical and physical properties which may lend itself to more radical and innovative treatment and disposal options, including the recovery of useful isotopes and also recycling within the nuclear industry. Such aspects are important in making the case for future graphite-moderated reactor options (for example, High-Temperature Reactors planned for simultaneous power production and high-grade heat sources for such applications as hydrogen production for road fuel). A number of initiatives have taken place since the mid 1990s aimed at exploring such alternative strategies and, more recently, improving technology offers new options at all stages of the dismantling and disposal process. A new IAEA Collaborative Research Program aims to build upon the work already done and the knowledge achieved, in order to identify the risks and uncertainties associated with alternative options for graphite disposal, along with cost comparisons, thus enabling individual Member States to have the best-available information at their disposal to configure their own programs. (authors)

  19. Textbook Adoption Application Guide Entering the Application ..................................................................................... 2

    E-Print Network [OSTI]

    Sura, Philip

    allows you to search for your assigned course(s) by: Term, Location, Academic Department, Course NumberTextbook Adoption Application Guide Entering the Application ............................................................................................................ 3 Search with Academic Criteria

  20. Effect of Ethanol and Methyl-tert-Butyl Ether on Monoaromatic Hydrocarbon Biodegradation: Response Variability for Different Aquifer Materials Under Various Electron-Accepting Conditions

    SciTech Connect (OSTI)

    Ruiz-Aguilar, G L; Fernandez-Sanchez, J M; Kane, S R; Kim, D; Alvarez, P J

    2003-10-06T23:59:59.000Z

    Aquifer microcosms were used to determine how ethanol and methyl-tert-butyl ether (MtBE) affect monoaromatic hydrocarbon degradation under different electron-accepting conditions commonly found in contaminated sites experiencing natural attenuation. Response variability was investigated by using aquifer material from four sites with different exposure history. The lag phase prior to BTEX (benzene, toluene, ethylbenzene, and xylenes) and ethanol degradation was typically shorter in microcosms with previously contaminated aquifer material, although previous exposure did not always result in high degradation activity. Toluene was degraded in all aquifer materials and generally under a broader range of electron-accepting conditions compared to benzene, which was degraded only under aerobic conditions. MtBE was not degraded within 100 days under any condition, and it did not affect BTEX or ethanol degradation patterns. Ethanol was often degraded before BTEX compounds, and had a variable effect on BTEX degradation as a function of electron-accepting conditions and aquifer material source. An occasional enhancement of toluene degradation by ethanol occurred in denitrifying microcosms with unlimited nitrate; this may be attributable to the fortuitous growth of toluene-degrading bacteria during ethanol degradation. Nevertheless, experiments with flow-through aquifer columns showed that this beneficial effect could be eclipsed by an ethanol-driven depletion of electron acceptors, which significantly inhibited BTEX degradation and is probably the most important mechanism by which ethanol could hinder BTEX natural attenuation. A decrease in natural attenuation could increase the likelihood that BTEX compounds reach a receptor as well as the potential duration of exposure.

  1. Space Reflector Materials for Prometheus Application

    SciTech Connect (OSTI)

    J. Nash; V. Munne; LL Stimely

    2006-01-31T23:59:59.000Z

    The two materials studied in depth which appear to have the most promise in a Prometheus reflector application are beryllium (Be) and beryllium oxide (BeO). Three additional materials, magnesium oxide (MgO), alumina (Al{sub 2}O{sub 3}), and magnesium aluminate spinel (MgAl{sub 2}O{sub 4}) were also recently identified to be of potential interest, and may have promise in a Prometheus application as well, but are expected to be somewhat higher mass than either a Be or BeO based reflector. Literature review and analysis indicates that material properties for Be are largely known, but there are gaps in the properties of Be0 relative to the operating conditions for a Prometheus application. A detailed preconceptual design information document was issued providing material properties for both materials (Reference (a)). Beryllium oxide specimens were planned to be irradiated in the JOY0 Japanese test reactor to partially fill the material property gaps, but more testing in the High Flux Isotope Reactor (HFIR) test reactor at Oak Ridge National Laboratory (ORNL) was expected to be needed. A key issue identified for BeO was obtaining material for irradiation testing with an average grain size of {approx}5 micrometers, reminiscent of material for which prior irradiation test results were promising. Current commercially available material has an average grain size of {approx}10 micrometers. The literature indicated that improved irradiation performance could be expected (e.g., reduced irradiation-induced swelling) with the finer grain size material. Confirmation of these results would allow the use of historic irradiated materials test results from the literature, reducing the extent of required testing and therefore the cost of using this material. Environmental, safety and health (ES&H) concerns associated with manufacturing are significant but manageable for Be and BeO. Although particulate-generating operations (e.g., machining, grinding, etc.) involving Be-bearing materials require significant controls, handling of clean, finished products requires only modest controls. Neither material was initially considered to be viable as a structural material, however, based on improved understanding of its unirradiated properties, Be should be evaluated due to having potentially acceptable structural properties in the unirradiated condition, i. e., during launch, when loads might be most limiting. All three of the alternative materials are non-hazardous, and thus do not engender the ES&H concerns associated with use of Be or BeO. Aluminum oxide is a widely available ceramic material with well characterized physical properties and well developed processing practices. Although the densest (3.97 g/cm{sup 3} versus Be: 1.85, BeO: 3.01, MgO: 3.58, and MgAl{sub 2}O{sub 4}: 3.60, all theoretical density), and therefore the heaviest, of all the materials considered for this application, its ease of fabrication, mechanical properties, availability and neutronic characteristics warrant its evaluation. Similarly, MgO is widely used in the refractory materials industry and has a large established manufacturing base while being lighter than Al{sub 2}O{sub 3}. Most of the commercially available MgO products incorporate additives or a second phase to avoid the formation of Mg(OH){sub 2} due to spontaneous reaction with ambient humidity. The hygroscopicity of MgO makes it a more difficult material to work with than Al{sub 2}O{sub 3} or MgAl{sub 2}O{sub 4}. Magnesium aluminate spinel, although not as widely available as either Al{sub 2}O{sub 3} or MgO, has the advantage of a density almost as low as MgO without being hygroscopic, and shares comparable neutronic performance characteristics in the reflector application.

  2. Geothermal direct heat applications program summary

    SciTech Connect (OSTI)

    None

    1982-08-01T23:59:59.000Z

    In 1978, the Department of Energy Division of Geothermal and Hydropower Technologies initiated a program to accelerate the direct use of geothermal energy, in which 23 projects were selected. The projects, all in the western part of the US, cover the use of geothermal energy for space conditioning (heating and cooling) and agriculture (aquaculture and greenhouses). Initially, two projects were slated for industrial processing; however, because of lack of geothermal resources, these projects were terminated. Of the 23 projects, seven were successfully completed, ten are scheduled for completion by the end of 1983, and six were terminated for lack of resources. Each of the projects is being documented from its inception through planning, drilling, and resource confirmation, design, construction, and one year of monitoring. The information is being collected, evaluated, and will be reported. Several reports will be produced, including detailed topical reports on economics, institutional and regulatory problems, engineering, and a summary final report. To monitor progress and provide a forum for exchange of information while the program is progressing, semiannual or annual review meetings have been held with all project directors and lead engineers for the past four years. This is the sixth meeting in that series. Several of the projects which have been terminated are not included this year. Overall, the program has been very successful. Valuable information has been gathered. problems have been encountered and resolved concerning technical, regulatory, and institutional constraints. Most projects have been proven to be economical with acceptable pay-back periods. Although some technical problems have emerged, they were resolved with existing off-the-shelf technologies and equipment. The risks involved in drilling for the resource, the regulatory constraints, the high cost of finance, and large front-end cost remain the key obstacles to the broad development of geothermal direct use applications.

  3. Ceramics for fusion applications

    SciTech Connect (OSTI)

    Clinard, F.W. Jr.

    1986-01-01T23:59:59.000Z

    Ceramics are required for a variety of uses in both near-term fusion devices and in commercial powerplants. These materials must retain adequate structural and electrical properties under conditions of neutron, particle, and ionizing irradiation; thermal and applied stresses; and physical and chemical sputtering. Ceramics such as Al/sub 2/O/sub 3/, MgAl/sub 2/O/sub 4/, BeO, Si/sub 3/N/sub 4/ and SiC are currently under study for fusion applications, and results to date show widely-varying response to the fusion environment. Materials can be identified today which will meet initial operating requirements, but improvements in physical properties are needed to achieve satisfactory lifetimes for critical applications.

  4. Internship Application Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformation for and Application deadline: November 30, 2014 Submit

  5. Application Process and Eligibility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAbout theOFFICEAmesApplication Acceleration on Current and Future

  6. Heat Pipes: An Industrial Application

    E-Print Network [OSTI]

    Murray, F.

    1984-01-01T23:59:59.000Z

    This paper reviews the basics of heat pipe exchangers. Included are how they are constructed, how they operate, where they have application, and various aspects of evaluating a potential application. After discussing the technical aspects of heat...

  7. Transactional Network Platform: Applications

    SciTech Connect (OSTI)

    Katipamula, Srinivas; Lutes, Robert G.; Ngo, Hung; Underhill, Ronald M.

    2013-10-31T23:59:59.000Z

    In FY13, Pacific Northwest National Laboratory (PNNL) with funding from the Department of Energy’s (DOE’s) Building Technologies Office (BTO) designed, prototyped and tested a transactional network platform to support energy, operational and financial transactions between any networked entities (equipment, organizations, buildings, grid, etc.). Initially, in FY13, the concept demonstrated transactions between packaged rooftop air conditioners and heat pump units (RTUs) and the electric grid using applications or "agents" that reside on the platform, on the equipment, on a local building controller or in the Cloud. The transactional network project is a multi-lab effort with Oakridge National Laboratory (ORNL) and Lawrence Berkeley National Laboratory (LBNL) also contributing to the effort. PNNL coordinated the project and also was responsible for the development of the transactional network (TN) platform and three different applications associated with RTUs. This document describes two applications or "agents" in details, and also summarizes the platform. The TN platform details are described in another companion document.

  8. GUIDE FOR APPLICANTS COLLABORATIVE PROJECT

    E-Print Network [OSTI]

    Milano-Bicocca, UniversitĂ 

    i GUIDE FOR APPLICANTS HEALTH COLLABORATIVE PROJECT FP7-HEALTH-2010-single-stage Further copies the following web-site: http://cordis.europa.eu/ #12;Theme: HEALTH Guide for Applicants: Collaborative projects for Applicants for calls using single-stage submission procedures. The main part of this Guide (sections 1 to 5

  9. 10 November 1998 Standard Applications

    E-Print Network [OSTI]

    10 November 1998 Standard Applications Framework for EPICS (SAFE) Steve Lewis (LBNL) Revision 2.0--for EPICS R3.13Beta12-LBL.2 or R3.13.0-LBL.2 1.0 Introduction The Standard Applications Framework for EPICS (SAFE) provides an organized approach for building EPICS applications on a Unix host, include

  10. Development of test acceptance standards for qualification of the glass-bonded zeolite waste form. Interim annual report, October 1995--September 1996

    SciTech Connect (OSTI)

    Simpson, L.J.; Wronkiewicz, D.J.; Fortner, J.A.

    1997-09-01T23:59:59.000Z

    Glass-bonded zeolite is being developed at Argonne National Laboratory in the Electrometallurgical Treatment Program as a potential ceramic waste form for the disposition of radionuclides associated with the US Department of Energy`s (DOE`s) spent nuclear fuel conditioning activities. The utility of standard durability tests [e.g. Materials Characterization Center Test No. 1 (MCC-1), Product Consistency Test (PCT), and Vapor Hydration Test (VHT)] are being evaluated as an initial step in developing test methods that can be used in the process of qualifying this material for acceptance into the Civilian Radioactive Waste Management System. A broad range of potential repository conditions are being evaluated to determine the bounding parameters appropriate for the corrosion testing of the ceramic waste form, and its behavior under accelerated testing conditions. In this report we provide specific characterization information and discuss how the durability test results are affected by changes in pH, leachant composition, and sample surface area to leachant volume ratios. We investigate the release mechanisms and other physical and chemical parameters that are important for establishing acceptance parameters, including the development of appropriate test methodologies required to measure product consistency.

  11. Mobile Robot Sensing for Environmental Applications

    E-Print Network [OSTI]

    2007-01-01T23:59:59.000Z

    Mobile robot sensing for environmental applications Amarjeetwith Mobile robot sensing for environmental applications (a)Mobile robot sensing for environmental applications only a

  12. Multitasking mesoporous nanomaterials for biorefinery applications

    SciTech Connect (OSTI)

    Kandel, Kapil [Ames Laboratory

    2013-05-02T23:59:59.000Z

    Mesoporous silica nanoparticles (MSNs) have attracted great interest for last two decades due to their unique and advantageous structural properties, such as high surface area, pore volume, stable mesostructure, tunable pore size and controllable particle morphology. The robust silica framework provides sites for organic modifications, making MSNs ideal platforms for adsorbents and supported organocatalysts. In addition, the pores of MSNs provide cavities/ channels for incorporation of metal and metal oxide nanoparticle catalysts. These supported metal nanoparticle catalysts benefit from confined local environments to enhance their activity and selectivity for various reactions. Biomass is considered as a sustainable feedstock with potential to replace diminishing fossil fuels for the production of biofuels. Among several strategies, one of the promising methods of biofuel production from biomass is to reduce the oxygen content of the feedstock in order to improve the energy density. This can be achieved by creating C-C bonds between biomass derived intermediates to increase the molecular weight of the final hydrocarbon molecules. In this context, pore size and organic functionality of MSNs are varied to obtain the ideal catalyst for a C-C bond forming reaction: the aldol condensation. The mechanistic aspects of this reaction in supported heterogeneous catalysts are explored. The modification of supported organocatalyst and the effect of solvent on the reaction are rationalized. The significance of two functional surfaces of MSNs is exploited by enzyme immobilization on the external surface and organo catalyst functionalization on the internal surface. Using this bifunctional catalyst, the tandem conversion of small chain alcohols into longer chain hydrocarbon molecules is demonstrated. The ability to incorporate metal and metal oxide nanoparticles in the pores and subsequent functionalization led to develop organic modified magnetic MSNs (OM-MSNs) for applications in microalgae biorefinery. Two different integrated biorefinery systems are highlighted. (i) OM-MSNs are used to harvest microalgae and selectively sequester free fatty acids (FFAs). (ii) OM-MSNs are shown to selectively sequester FFAs and convert them into diesel-range liquid hydrocarbon fuels. A similar MSN supported metal nanoparticle catalyst is demonstrated to transform FFAs into green diesel with even greater activity and selectivity. The incorporation of a different organic functional group into MSN provides a selective adsorbent for separation and purification of ?-tocopherol from microalgae oil. The functional group with electron deficient aromatic rings demonstrated high sequestration capacity and selectivity of {alpha}-tocopherol.

  13. Direct application of geothermal energy

    SciTech Connect (OSTI)

    Reistad, G.M.

    1980-01-01T23:59:59.000Z

    An overall treatment of direct geothermal applications is presented with an emphasis on the above-ground engineering. The types of geothermal resources and their general extent in the US are described. The potential market that may be served with geothermal energy is considered briefly. The evaluation considerations, special design aspects, and application approaches for geothermal energy use in each of the applications are considered. The present applications in the US are summarized and a bibliography of recent studies and applications is provided. (MHR)

  14. Resilience: Theory and Application.

    SciTech Connect (OSTI)

    Carlson, J.L.; Haffenden, R.A.; Bassett, G.W.; Buehring, W.A.; Collins, M.J., III; Folga, S.M.; Petit, F.D.; Phillips, J.A.; Verner, D.R.; Whitfield, R.G. (Decision and Information Sciences)

    2012-02-03T23:59:59.000Z

    There is strong agreement among policymakers, practitioners, and academic researchers that the concept of resilience must play a major role in assessing the extent to which various entities - critical infrastructure owners and operators, communities, regions, and the Nation - are prepared to respond to and recover from the full range of threats they face. Despite this agreement, consensus regarding important issues, such as how resilience should be defined, assessed, and measured, is lacking. The analysis presented here is part of a broader research effort to develop and implement assessments of resilience at the asset/facility and community/regional levels. The literature contains various definitions of resilience. Some studies have defined resilience as the ability of an entity to recover, or 'bounce back,' from the adverse effects of a natural or manmade threat. Such a definition assumes that actions taken prior to the occurrence of an adverse event - actions typically associated with resistance and anticipation - are not properly included as determinants of resilience. Other analyses, in contrast, include one or more of these actions in their definitions. To accommodate these different definitions, we recognize a subset of resistance- and anticipation-related actions that are taken based on the assumption that an adverse event is going to occur. Such actions are in the domain of resilience because they reduce both the immediate and longer-term adverse consequences that result from an adverse event. Recognizing resistance- and anticipation-related actions that take the adverse event as a given accommodates the set of resilience-related actions in a clear-cut manner. With these considerations in mind, resilience can be defined as: 'the ability of an entity - e.g., asset, organization, community, region - to anticipate, resist, absorb, respond to, adapt to, and recover from a disturbance.' Because critical infrastructure resilience is important both in its own right and because of its implications for community/regional resilience, it is especially important to develop a sound methodology for assessing resilience at the asset/facility level. This objective will be accomplished by collecting data on four broadly defined groups of resilience-enhancing measures: preparedness, mitigation measures, response capabilities, and recovery mechanisms. Table ES-1 illustrates how the six components that define resilience are connected to the actions that enhance the capacity of an entity to be resilient. The relationships illustrated in Table ES-1 provide the framework for developing a survey instrument that will be used to elicit the information required to assess resilience at the asset/facility level. The resilience of a community/region is a function of the resilience of its subsystems, including its critical infrastructures, economy, civil society, governance (including emergency services), and supply chains/dependencies. The number and complexity of these subsystems will make the measurement of resilience more challenging as we move from individual assets/facilities to the community/regional level (where critical infrastructure resilience is only one component). Specific challenges include uncertainty about relationships (e.g., the composition of specific supply chains), data gaps, and time and budget constraints that prevent collection of all of the information needed to construct a comprehensive assessment of the resilience of a specific community or region. These challenges can be addressed, at least partially, by adopting a 'systems approach' to the assessment of resilience. In a systems approach, the extent to which the analysis addresses the resilience of the individual subsystems can vary. Specifically, high-level systems analysis can be used to identify the most important lower-level systems. In turn, within the most important lower-level systems, site assessment data should be collected only on the most critical asset-level components about which the least is known. Implementation of the strategies outlined here to as

  15. Application of fluorescence microscopy to coal-derived resid characterization

    SciTech Connect (OSTI)

    Rathbone, R.F.; Hower, J.C.; Derbyshire, F.J.

    1991-01-01T23:59:59.000Z

    This study evaluates the usefulness of a fluorescence microscopy methodology to analyze coal-derived resids and interpret the data in the light of liquefaction processing conditions, process response, the inferred resid reactivity, and in relation to results of other analytical data. The fluorescence technique utilized has been widely applied to coal and kerogen characterization, albeit with some modifications, but is novel in its application to the characterization of coal liquids. Fluorescence is the emission of light energy which occurs when electrons, having been excited to a higher energy orbital, return to their lower energy ground state. The majority of organic molecules that fluoresce are those with conjugated double bonds (chromophores), such as aromatics, characterized by pi-electrons less strongly bound within the molecule than sigma electrons, that can be excited to anti-bonding pi-orbitals. Increasing the extent of pi-bond conjugation (i.e. larger molecular size) generally imparts a shift in absorption and emission spectra to longer wavelengths. Resid fluorescence largely depends on the concentration and degree of conjugation of aromatic chromophores in the high molecular weight liquids, possibly with ancillary effects from oxygen functionalities. In this context, fluorescence analysis of liquefaction resids can potentially evaluate process performance, since direct liquefaction processes endeavor to break down the macromolecular structure of coal, and reduce the molecular weight of polycondensed aromatics through hydrogenation, the opening of ring structures, and heteroatom removal.

  16. Application of fluorescence microscopy to coal-derived resid characterization

    SciTech Connect (OSTI)

    Rathbone, R.F.; Hower, J.C.; Derbyshire, F.J.

    1991-12-31T23:59:59.000Z

    This study evaluates the usefulness of a fluorescence microscopy methodology to analyze coal-derived resids and interpret the data in the light of liquefaction processing conditions, process response, the inferred resid reactivity, and in relation to results of other analytical data. The fluorescence technique utilized has been widely applied to coal and kerogen characterization, albeit with some modifications, but is novel in its application to the characterization of coal liquids. Fluorescence is the emission of light energy which occurs when electrons, having been excited to a higher energy orbital, return to their lower energy ground state. The majority of organic molecules that fluoresce are those with conjugated double bonds (chromophores), such as aromatics, characterized by pi-electrons less strongly bound within the molecule than sigma electrons, that can be excited to anti-bonding pi-orbitals. Increasing the extent of pi-bond conjugation (i.e. larger molecular size) generally imparts a shift in absorption and emission spectra to longer wavelengths. Resid fluorescence largely depends on the concentration and degree of conjugation of aromatic chromophores in the high molecular weight liquids, possibly with ancillary effects from oxygen functionalities. In this context, fluorescence analysis of liquefaction resids can potentially evaluate process performance, since direct liquefaction processes endeavor to break down the macromolecular structure of coal, and reduce the molecular weight of polycondensed aromatics through hydrogenation, the opening of ring structures, and heteroatom removal.

  17. A mobile-agent based wireless sensing network for structural monitoring applications

    SciTech Connect (OSTI)

    Taylor, Stuart G [Los Alamos National Laboratory; Farinholt, Kevin M [Los Alamos National Laboratory; Figueiredo, Eloi [Los Alamos National Laboratory; Park, Gyuhae [Los Alamos National Laboratory; Farrar, Charles R [Los Alamos National Laboratory; Flynn, Eric B [UCSD; Mascarenas, David L [UCSD; Todd, Michael D [UCSD

    2008-01-01T23:59:59.000Z

    A new wireless sensing network paradigm is presented for structural monitoring applications. In this approach, both power and data interrogation commands are conveyed via a mobile agent that is sent to sensor nodes to perform intended interrogations, which can alleviate several limitations of the traditional sensing networks. Furthermore, the mobile agent provides computational power to make near real-time assessments on the structural conditions. This paper will discuss such prototype systems, which are used to interrogate impedance-based sensors for structural health monitoring applications. Our wireless sensor node is specifically designed to accept various energy sources, including wireless energy transmission, and to be wirelessly triggered on an as-needed basis by the mobile agent or other sensor nodes. The capabilities of this proposed sensing network paradigm are demonstrated in the laboratory and the field.

  18. Factsheets Web Application

    SciTech Connect (OSTI)

    VIGIL,FRANK; REEDER,ROXANA G.

    2000-10-30T23:59:59.000Z

    The Factsheets web application was conceived out of the requirement to create, update, publish, and maintain a web site with dynamic research and development (R and D) content. Before creating the site, a requirements discovery process was done in order to accurately capture the purpose and functionality of the site. One of the high priority requirements for the site would be that no specialized training in web page authoring would be necessary. All functions of uploading, creation, and editing of factsheets needed to be accomplished by entering data directly into web form screens generated by the application. Another important requirement of the site was to allow for access to the factsheet web pages and data via the internal Sandia Restricted Network and Sandia Open Network based on the status of the input data. Important to the owners of the web site would be to allow the published factsheets to be accessible to all personnel within the department whether or not the sheets had completed the formal Review and Approval (R and A) process. Once the factsheets had gone through the formal review and approval process, they could then be published both internally and externally based on their individual publication status. An extended requirement and feature of the site would be to provide a keyword search capability to search through the factsheets. Also, since the site currently resides on both the internal and external networks, it would need to be registered with the Sandia search engines in order to allow access to the content of the site by the search engines. To date, all of the above requirements and features have been created and implemented in the Factsheet web application. These have been accomplished by the use of flat text databases, which are discussed in greater detail later in this paper.

  19. Evaluating land application effects

    SciTech Connect (OSTI)

    Sarkis, K. (Philadelphia Water Department, PA (USA))

    1987-01-01T23:59:59.000Z

    The Philadelphia, PA Water Department embarked on a land application program of its treated wastewater sludge in 1977. Initially, liquid sludge averaging from 1-5% solids was applied to approximately 400 acres of corn, soybeans, and sod at rates sufficient to supply crop nitrogen needs. During the 1978 through 1984 growing seasons, crops and soils were monitored for heavy metals (bioavailability of cadmium, copper, nickel, chromium, lead and zinc) and in 1984 for PCB accumulation. This report summarizes results of the monitoring program until 1984.

  20. Analog computer fundamentals & application

    E-Print Network [OSTI]

    Patel, R.N

    2012-06-07T23:59:59.000Z

    TEXAS A&M UNIVERSITY LIBRARY ANALOG COMPUTER FUNDAMENTALS Rc APPLICATION A Technical RePort by R. N. PATE L submitted to PROD J. H. CADDESS In n art i a 1 fulf i lment of the requi. rements for the degree of MASTER OF ENGINEERING TEXAS A...-linear operation which is necessary on a general purpose computer. A "quarter-square" tech- -nique is used to effect this operation, use being made of the identity: X7 = 'j?'P(?J3 -c~-~)3 The connections shown i. n figure be made to the patch panel...

  1. Passive solar applications

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1985-01-01T23:59:59.000Z

    Passive solar applications in buildings are described. The major emphasis of the research has been on devising mathematical models to characterize heat flow within buildings, on the validation of these models by comparison with test results, and on the subsequent use of the models to investigate the influence of both various design parameters and the weather on system performance. Results from both test modules and monitored buildings are discussed. Simulation analysis, the development of simplified methods, and systems analysis are outlined. Passive solar potential in China is discussed.

  2. $\\beta$ Energy Loss Analysis in ${15}^P$: Application to Nuclear Batteries

    E-Print Network [OSTI]

    Mirfayzi, Seyed Reza

    2012-01-01T23:59:59.000Z

    Using radioactive nuclei for electricity generation in Microelectromechanical Systems (MEMS) is important research as needs for longer life batteries increase. There are many applications developed in recent years, however there are limitations still to overcome before a final product can be produced. One of the important issue is the low power output. This research addresses this issue with a new method in fabrication for powering MEMS sensors. We have proposed to fabricate $^{63}Ni$ nano-particle $\\beta^-$source in a glassy phosphorous type sphere which creates scintillation and phosphorescent photons. The micro-spheres will be doped in our semiconductor. Since $^{63}^Ni$ is a pure $\\beta^-$ emitter, in this report the energy loss $dE/dx$ of $\\beta^-$ in our scintillation material (phosphorus $^{15}P$) is modelled using C++ coding with GEANT4 and furthermore the particle distributions in two different source geometries (circular and square structure) is studied using Finite Element Analysis (FEA). We have s...

  3. Development of a Performance and Processing Property Acceptance Region for Cementitious Low-Level Waste Forms at Savannah River Site - 13174

    SciTech Connect (OSTI)

    Staub, Aaron V. [Savannah River Remediation, Aiken, SC 29808 (United States)] [Savannah River Remediation, Aiken, SC 29808 (United States); Reigel, Marissa M. [Savannah River National Lab, Aiken, SC 29808 (United States)] [Savannah River National Lab, Aiken, SC 29808 (United States)

    2013-07-01T23:59:59.000Z

    The Saltstone Production and Disposal Facilities (SPF and SDF) at the Savannah River Site (SRS) have been treating decontaminated salt solution, a low-level aqueous waste stream (LLW) since facility commissioning in 1990. In 2012, the Saltstone Facilities implemented a new Performance Assessment (PA) that incorporates an alternate design for the disposal facility to ensure that the performance objectives of DOE Order 435.1 and the National Defense Authorization Act (NDAA) of Fiscal Year 2005 Section 3116 are met. The PA performs long term modeling of the waste form, disposal facility, and disposal site hydrogeology to determine the transport history of radionuclides disposed in the LLW. Saltstone has been successfully used to dispose of LLW in a grout waste form for 15 years. Numerous waste form property assumptions directly impact the fate and transport modeling performed in the PA. The extent of process variability and consequence on performance properties are critical to meeting the assumptions of the PA. The SPF has ensured performance property acceptability by way of implementing control strategies that ensure the process operates within the analyzed limits of variability, but efforts continue to improve the understanding of facility performance in relation to the PA analysis. A similar understanding of the impact of variability on processing parameters is important from the standpoint of the operability of the production facility. The fresh grout slurry properties (particularly slurry rheology and the rate of hydration and structure formation) of the waste form directly impact the pressure and flow rates that can be reliably processed. It is thus equally important to quantify the impact of variability on processing parameters to ensure that the design basis assumptions for the production facility are maintained. Savannah River Remediation (SRR) has been pursuing a process that will ultimately establish a property acceptance region (PAR) to incorporate elements important to both processability and long-term performance properties. This process involves characterization of both emplaced product samples from the disposal facility and laboratory-simulated samples to demonstrate the effectiveness of the lab simulation. With that basis confirmed, a comprehensive variability study using non-radioactive simulants will define the acceptable PAR, or 'operating window' for Saltstone production and disposal. This same process will be used in the future to evaluate new waste streams for disposal or changes to the existing process flowsheet. (authors)

  4. Surety applications in transportation

    SciTech Connect (OSTI)

    Matalucci, R.V.; Miyoshi, D.S.

    1998-01-01T23:59:59.000Z

    Infrastructure surety can make a valuable contribution to the transportation engineering industry. The lessons learned at Sandia National Laboratories in developing surety principles and technologies for the nuclear weapons complex and the nuclear power industry hold direct applications to the safety, security, and reliability of the critical infrastructure. This presentation introduces the concepts of infrastructure surety, including identification of the normal, abnormal, and malevolent threats to the transportation infrastructure. National problems are identified and examples of failures and successes in response to environmental loads and other structural and systemic vulnerabilities are presented. The infrastructure surety principles developed at Sandia National Laboratories are described. Currently available technologies including (a) three-dimensional computer-assisted drawing packages interactively combined with virtual reality systems, (b) the complex calculational and computational modeling and code-coupling capabilities associated with the new generation of supercomputers, and (c) risk-management methodologies with application to solving the national problems associated with threats to the critical transportation infrastructure are discussed.

  5. Land application of sludge

    SciTech Connect (OSTI)

    Page, A.L.; Logan, T.J.; Ryan, J.A. (eds.)

    1987-01-01T23:59:59.000Z

    This book is the proceedings of a workshop held in Las Vegas, NV in 1985 entitled Effects of Sewage Sludge Quality and Soil Properties on Plant Uptake of Sludge-Applied Trace Constituents. The workshop was in response to the need to utilize the most current available information in the development of regulations and criteria to safely apply and manage the land application of municipal sewage sludge. The participants were undoubtedly the most knowledgeable of this subject matter, and were divided into five separate but related task groups. The groups addressed the following sludge-related topics: (1) role of soil properties on accumulation of trace element by crops; (2) role of sludge properties on accumulation of trace elements by crops; (3) influence of long-term application on accumulation of trace elements by crops; (4) transfer of trace elements to the food chain, and (5) effects of trace organics in agroecosystems and their risk assessment to humans. The text, therefore, parallels those of the results of the task groups. The five main chapters followed a similar format, i.e., having an introduction section, a comprehensive literature review, discussion of recent and current data, and synthesis of the most relevant information.

  6. Applications for Certification (Contracting) | Department of...

    Office of Environmental Management (EM)

    Contracting) Applications for Certification (Contracting) Application FAC-C Level I.pdf Application FAC-C Level II.pdf Application FAC-C Level III.pdf More Documents & Publications...

  7. NEW OPTICAL SENSOR SUITE FOR ULTRAHIGH TEMPERATURE FOSSIL FUEL APPLICATIONS

    SciTech Connect (OSTI)

    Russell G. May; Tony Peng; Tom Flynn

    2004-12-01T23:59:59.000Z

    Accomplishments during the Phase I of a program to develop and demonstrate technology for the instrumentation of advanced powerplants are described. Engineers from Prime Research, LC and Babcock and Wilcox Research Center collaborated to generate a list of potential applications for robust photonic sensors in existing and future boiler plants. From that list, three applications were identified as primary candidates for initial development and demonstration of high-temperature sensors in an ultrasupercritical power plant. A matrix of potential fiber optic sensor approaches was derived, and a data set of specifications for high-temperature optical fiber was produced. Several fiber optic sensor configurations, including interferometric (extrinsic and intrinsic Fabry-Perot interferometer), gratings (fiber Bragg gratings and long period gratings), and microbend sensors, were evaluated in the laboratory. In addition, progress was made in the development of materials and methods to apply high-temperature optical claddings to sapphire fibers, in order to improve their optical waveguiding properties so that they can be used in the design and fabrication of high-temperature sensors. Through refinements in the processing steps, the quality of the interface between core and cladding of the fibers was improved, which is expected to reduce scattering and attenuation in the fibers. Numerical aperture measurements of both clad and unclad sapphire fibers were obtained and used to estimate the reduction in mode volume afforded by the cladding. High-temperature sensors based on sapphire fibers were also investigated. The fabrication of an intrinsic Fabry-Perot cavity within sapphire fibers was attempted by the bulk diffusion of magnesium oxide into short localized segments of longer sapphire fibers. Fourier analysis of the fringes that resulted when the treated fiber was interrogated by a swept laser spectrometer suggested that an intrinsic cavity had been formed in the fiber. Also, an unclad sapphire fiber was tested as a temperature sensor at moderate temperatures (up to 775 C).

  8. Engineering and Materials for Automotive Thermoelectric Applications...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Materials for Automotive Thermoelectric Applications Engineering and Materials for Automotive Thermoelectric Applications Design and optimization of TE exhaust generator,...

  9. Graphene and Graphene Oxide: Biofunctionalization and Applications...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Graphene Oxide: Biofunctionalization and Applications in Biotechnology. Graphene and Graphene Oxide: Biofunctionalization and Applications in Biotechnology. Abstract: Graphene...

  10. IAEA-TECDOC-1695 Application of

    E-Print Network [OSTI]

    Paytan, Adina

    hydrolysis and do not exchange oxy- gen with water without biological mediation (enzyme-mediated recycling and animal waste enters surface waters and groundwater [2] and these nutrient loads can stimulate large) and integrates processes over longer time scales. While P has only one stable isotope, P in most organic

  11. Criteria for the development and use of the methodology for environmentally-acceptable fossil energy site evaluation and selection. Volume 2. Final report

    SciTech Connect (OSTI)

    Eckstein, L.; Northrop, G.; Scott, R.

    1980-02-01T23:59:59.000Z

    This report serves as a companion document to the report, Volume 1: Environmentally-Acceptable Fossil Energy Site Evaluation and Selection: Methodology and Users Guide, in which a methodology was developed which allows the siting of fossil fuel conversion facilities in areas with the least environmental impact. The methodology, known as SELECS (Site Evaluation for Energy Conversion Systems) does not replace a site specific environmental assessment, or an environmental impact statement (EIS), but does enhance the value of an EIS by thinning down the number of options to a manageable level, by doing this in an objective, open and selective manner, and by providing preliminary assessment and procedures which can be utilized during the research and writing of the actual impact statement.

  12. Clean Energy Application Center

    SciTech Connect (OSTI)

    Freihaut, Jim

    2013-09-30T23:59:59.000Z

    The Mid Atlantic Clean Energy Application Center (MACEAC), managed by The Penn State College of Engineering, serves the six states in the Mid-Atlantic region (Pennsylvania, New Jersey, Delaware, Maryland, Virginia and West Virginia) plus the District of Columbia. The goals of the Mid-Atlantic CEAC are to promote the adoption of Combined Heat and Power (CHP), Waste Heat Recovery (WHR) and District Energy Systems (DES) in the Mid Atlantic area through education and technical support to more than 1,200 regional industry and government representatives in the region. The successful promotion of these technologies by the MACEAC was accomplished through the following efforts; (1)The MACEAC developed a series of technology transfer networks with State energy and environmental offices, Association of Energy Engineers local chapters, local community development organizations, utilities and, Penn State Department of Architectural Engineering alumni and their firms to effectively educate local practitioners about the energy utilization, environmental and economic advantages of CHP, WHR and DES; (2) Completed assessments of the regional technical and market potential for CHP, WHR and DE technologies application in the context of state specific energy prices, state energy and efficiency portfolio development. The studies were completed for Pennsylvania, New Jersey and Maryland and included a set of incentive adoption probability models used as a to guide during implementation discussions with State energy policy makers; (3) Using the technical and market assessments and adoption incentive models, the Mid Atlantic CEAC developed regional strategic action plans for the promotion of CHP Application technology for Pennsylvania, New Jersey and Maryland; (4) The CHP market assessment and incentive adoption model information was discussed, on a continuing basis, with relevant state agencies, policy makers and Public Utility Commission organizations resulting in CHP favorable incentive programs in New Jersey, Pennsylvania, Maryland and Delaware; (5) Developed and maintained a MACEAC website to provide technical information and regional CHP, WHR and DE case studies and site profiles for use by interested stakeholders in information transfer and policy discussions; (6) Provided Technical Assistance through feasibility studies and on site evaluations. The MACEAC completed 28 technical evaluations and 9 Level 1 CHP analyses ; and (7) the MACEAC provided Technical Education to the region through a series of 29 workshops and webinars, 37 technical presentations, 14 seminars and participation in 13 CHP conferences.

  13. Salt spray testing of sacrificial and barrier type coatings for the purpose of finding a corrosion resistant and environmentally acceptable replacement for cadmium plate

    SciTech Connect (OSTI)

    Schultz, E.J.; Haeberle, T.

    1996-12-31T23:59:59.000Z

    Cadmium plate is used to protect various components of offshore oil and gas production equipment from surface marine environments such as salt spray. This research project was performed to find an environmentally acceptable coating which provides equivalent or superior resistance to surface marine corrosion when compared to cadmium plate. In order to find a replacement for cadmium plate, a large number of sacrificial and barrier type coatings were exposed to an accelerated salt spray test in accordance with ASTM B117-94. The only sacrificial coating which resisted 1,000 hours of accelerated salt spray testing without any indication of failure was the 0.0006-in. thick zinc-nickel plate with an olive drab chromate treatment. Based on these test results, zinc-nickel plate is recommended as a corrosion resistant and environmentally acceptable replacement for cadmium plate for use in surface marine environments. Electroless nickel coatings with a minimum applied thickness of 0.002-in. also resisted 1,000 hours of accelerated salt spray testing without indication of failure. Electroless nickel is not recommended for corrosion resistance in salt spray environments for two reasons. Electroless nickel is susceptible to microcracking when heat treated at moderate to high temperatures. Heat treatment improves the hardness and resultant wear resistance of the coating. Microcracking will compromise the integrity of the coating resulting in pitting, cracking or crevice corrosion of the substrate in corrosive environments. Secondly, any significant mechanical damage to the coating or disbonding of the coating substrate interface will also result in corrosive attack of the substrate.

  14. High Temperature Gas Reactors: Assessment of Applicable Codes and Standards

    SciTech Connect (OSTI)

    McDowell, Bruce K.; Nickolaus, James R.; Mitchell, Mark R.; Swearingen, Gary L.; Pugh, Ray

    2011-10-31T23:59:59.000Z

    Current interest expressed by industry in HTGR plants, particularly modular plants with power up to about 600 MW(e) per unit, has prompted NRC to task PNNL with assessing the currently available literature related to codes and standards applicable to HTGR plants, the operating history of past and present HTGR plants, and with evaluating the proposed designs of RPV and associated piping for future plants. Considering these topics in the order they are arranged in the text, first the operational histories of five shut-down and two currently operating HTGR plants are reviewed, leading the authors to conclude that while small, simple prototype HTGR plants operated reliably, some of the larger plants, particularly Fort St. Vrain, had poor availability. Safety and radiological performance of these plants has been considerably better than LWR plants. Petroleum processing plants provide some applicable experience with materials similar to those proposed for HTGR piping and vessels. At least one currently operating plant - HTR-10 - has performed and documented a leak before break analysis that appears to be applicable to proposed future US HTGR designs. Current codes and standards cover some HTGR materials, but not all materials are covered to the high temperatures envisioned for HTGR use. Codes and standards, particularly ASME Codes, are under development for proposed future US HTGR designs. A 'roadmap' document has been prepared for ASME Code development; a new subsection to section III of the ASME Code, ASME BPVC III-5, is scheduled to be published in October 2011. The question of terminology for the cross-duct structure between the RPV and power conversion vessel is discussed, considering the differences in regulatory requirements that apply depending on whether this structure is designated as a 'vessel' or as a 'pipe'. We conclude that designing this component as a 'pipe' is the more appropriate choice, but that the ASME BPVC allows the owner of the facility to select the preferred designation, and that either designation can be acceptable.

  15. Kazakhstan receiving acreage applications

    SciTech Connect (OSTI)

    Not Available

    1995-01-09T23:59:59.000Z

    Kazakhstan is receiving applications for exploration and development rights to large tracts in the central and eastern parts of the republic. The program is part of a country-wide effort to attract more foreign investigators to help underwrite massive industrial privatization aimed at revitalizing Kazakhstan's economy. A delegation of Kazakh officials visited Houston the last week in November to publicize petroleum opportunities in the republic and appeared Dec. 1--2 at a conference to present an overview of Kazakhstan's petroleum prospectivity. Officials also reviewed recently approved legal, financial, and environmental legislation intended to improve the attractiveness of investing in Kazakhstan's energy sector. This paper discusses the status of development, gives a geologic overview, and highlights the geology of the South Torgay and Teniz basins.

  16. Dynamic load balancing of applications

    DOE Patents [OSTI]

    Wheat, Stephen R. (Albuquerque, NM)

    1997-01-01T23:59:59.000Z

    An application-level method for dynamically maintaining global load balance on a parallel computer, particularly on massively parallel MIMD computers. Global load balancing is achieved by overlapping neighborhoods of processors, where each neighborhood performs local load balancing. The method supports a large class of finite element and finite difference based applications and provides an automatic element management system to which applications are easily integrated.

  17. Dynamic load balancing of applications

    DOE Patents [OSTI]

    Wheat, S.R.

    1997-05-13T23:59:59.000Z

    An application-level method for dynamically maintaining global load balance on a parallel computer, particularly on massively parallel MIMD computers is disclosed. Global load balancing is achieved by overlapping neighborhoods of processors, where each neighborhood performs local load balancing. The method supports a large class of finite element and finite difference based applications and provides an automatic element management system to which applications are easily integrated. 13 figs.

  18. Applications -- Science and Engineering Submissions

    E-Print Network [OSTI]

    Optimization Online An E-Print Site for the Optimization Community. Applications -- Science and Engineering submissions; 2000 · 2001 · 2002 · 2003 · 2004 ...

  19. Grant Application Package CFDA Number

    E-Print Network [OSTI]

    Talley, Lynne D.

    Grant Application Package CFDA Number: Opportunity Title: Offering Agency: Agency Contact: Opportunity Open Date: Opportunity Close Date: CFDA Description: Opportunity Number: Competition ID

  20. Project Application: Lie Theory and Applications Short description

    E-Print Network [OSTI]

    Michor, Peter W.

    Project Application: Lie Theory and Applications Short description Several lines of investigation. Approximations procedures on regular Fr´echet Lie groups aiming towards solving certain non-linear partial differential equations. We want to apply a new approximation procedure to nonlinear partial differential