National Library of Energy BETA

Sample records for logs electric micro

  1. Electric Micro Imager Log At Coso Geothermal Area (2003) | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePowerEdisto Electric Coop, Inc Jump to:ElectraLink Jump to:

  2. COMPARISON OF ACOUSTIC AND ELECTRICAL IMAGE LOGS FROM THE COSO...

    Open Energy Info (EERE)

    COMPARISON OF ACOUSTIC AND ELECTRICAL IMAGE LOGS FROM THE COSO GEOTHERMAL FIELD, CA Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings:...

  3. Biological Micro-Electrical Mechanical Systems Micro-electrical mechanical systems (MEMS) created new

    E-Print Network [OSTI]

    Hill, Wendell T.

    Biological Micro-Electrical Mechanical Systems (bioMEMS) Micro-electrical mechanical systems (MEMS beginning to be explored. bioMEMS combine the potential of cell-sized systems with the advantages in cutting edge research in bioMEMS to revolutionize mechanized drug discovery processes, non- invasive

  4. Adaptive Fluid Electrical Conductivity Logging to Determine the Salinity Profiles in Groundwater

    E-Print Network [OSTI]

    Quinn, Nigel

    quality data ­ existing production wells mostly used for emergency water supply · High cost of groundwater packers #12;Down-hole tool in difference flow logging (DIFF) #12;Flowing electrical conductivity logging water of constant salinity distinctly different from that of formation water). 2. Shut in well and lower

  5. CARNEGIE MELLON UNIVERSITY Electric Power Micro-grids: Opportunities and Challenges

    E-Print Network [OSTI]

    CARNEGIE MELLON UNIVERSITY Electric Power Micro-grids: Opportunities and Challenges for an Emerging;Electric Power Micro-grids: Barriers and opportunities for an emerging distributed energy architecture ii, such as engines and micro-turbines. #12;Electric Power Micro-grids: Barriers and opportunities for an emerging

  6. Community-Based Electric Micro-Grids Can Contribute to Rural Development: Evidence from Kenya

    E-Print Network [OSTI]

    Jacobson, Arne

    -based electricity project in rural Ken- ya. Empirical research on group-based micro-grids is also rele- vant in view

  7. GHZ ELECTRICAL PROPERTIES OF CARBON NANOTUBES ON SILICON DIOXIDE MICRO BRIDGES

    E-Print Network [OSTI]

    Tang, William C

    1 GHZ ELECTRICAL PROPERTIES OF CARBON NANOTUBES ON SILICON DIOXIDE MICRO BRIDGES SHENG F. YEN1 of an approach to reduce the high-frequency capacitive feedthrough and dielectric leakages of carbon nanotubes grown on silicon dioxide micro bridges suspended over silicon substrates. The microwave reflection

  8. School of Electronic, Electrical and Systems Engineering From the first time you log on to our website to when you shake

    E-Print Network [OSTI]

    Birmingham, University of

    School of Electronic, Electrical and Systems Engineering From the first time you log on to our of Electronic, Electrical and Systems Engineering Smart devices, smart solutions... smart people. #12;2 School of Electronic, Electrical and Systems Engineering Welcome I am delighted that you are interested in engineering

  9. Electrical characterization of micro-organisms using microfabricated devices

    E-Print Network [OSTI]

    Bashir, Rashid

    . Kosari and G. Vasmatzis Mayo Clinic, Rochester, Minnesota 55905 A. Bhunia Department of Food Sciences by the micro-organisms when traversing through the pore. © 2002 American Vacuum Society. DOI: 10

  10. April 27, 2010 Well Logging I

    E-Print Network [OSTI]

    Ito, Garrett

    completing drilling) Logging While Drilling (LWD) Both use similar tools and each has its advantages seismic profile (VSP) · Logging While Drilling (LWD) Standard Logs #12;4/26/2010 3 · Nuclear Logs (VSP) · Logging While Drilling (LWD) · Nuclear Logs · Sonic - Monopole - Dipole · Electrical

  11. Change Log

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Log NERSC-8 Trinity Benchmarks Change Log 09032013 Correction applied to MiniDFT web-page (to remove inconsistency with MiniDFT README). Capability Improvement...

  12. Design and Fabrication of a Micro Electrostatic Vibration-to-Electricity Energy Converter

    E-Print Network [OSTI]

    Chiu, Yi; Chu, Yu-Shan

    2007-01-01

    This paper presents a micro electrostatic vibration-toelectricity energy converter. For the 3.3 V supply voltage and 1cm2 chip area constraints, optimal design parameters were found from theoretical calculation and Simulink simulation. In the current design, the output power is 200 $\\mu$W/cm2 for the optimal load of 8 M\\Omega. The device was fabricated in a silicon-on-insulator (SOI) wafer. Mechanical and electrical measurements were conducted. Residual particles caused shortage of the variable capacitor and the output power could not be measured. Device design and fabrication processes are being refined.

  13. Change Log

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room News PublicationsAudits &BradburyMay 1,CenterJohnCeremony TheChallenges andChange Log

  14. Change Log

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room News PublicationsAudits &BradburyMay 1,CenterJohnCeremony TheChallenges andChange LogChange

  15. On the electric micro-field in plasmas: statistics of the spatial derivatives

    SciTech Connect (OSTI)

    Guerricha, S.; Chihi, S.; Meftah, M. T.

    2008-10-22

    Using the Monte-Carlo simulation we calculated for some specific plasmas, the distribution functions of the derivatives of the micro-field components. Some of them are compared to those calculated earlier by other authors.

  16. Micro-economic Analysis of the Physical Constrained Markets: Game Theory Application to Competitive Electricity Markets

    E-Print Network [OSTI]

    Bompard, E; Ragazzi, E; Bompard, Ettore; Ma, Yuchao; Ragazzi, Elena

    2006-01-01

    Competition has been introduced in the electricity markets with the goal of reducing prices and improving efficiency. The basic idea which stays behind this choice is that, in competitive markets, a greater quantity of the good is exchanged at a lower and a lower price, leading to higher market efficiency. Electricity markets are pretty different from other commodities mainly due to the physical constraints related to the network structure that may impact the market performance. The network structure of the system on which the economic transactions need to be undertaken poses strict physical and operational constraints. Strategic interactions among producers that game the market with the objective of maximizing their producer surplus must be taken into account when modeling competitive electricity markets. The physical constraints, specific of the electricity markets, provide additional opportunity of gaming to the market players. Game theory provides a tool to model such a context. This paper discussed the a...

  17. Logs Wood Chips Straw Corn Switchgrass

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Clean energy can come from the sun. The energy in wind can make electricity. Bioenergy comes from plants we can turn into fuel. Logs Wood Chips Straw Corn Switchgrass We can use...

  18. Addressable Floating Light Activated Micro-Electrical Stimulators for Wireless Neurostimulation

    E-Print Network [OSTI]

    Member, IEEE Abstract-- Stimulation of the central nervous system can be useful for treating neurological. INTRODUCTION Electrical stimulation of the central nervous system (CNS) has been used as a treatment, but their size limits usage in the CNS. Photovoltaic stimulators have the ability to float, similar to RF

  19. Selecting The Optimal Logging Suite For Geothermal Reservoir...

    Open Energy Info (EERE)

    tensile wall fractures, and were adequate to detect stratigraphic features. Density, photo-electric factor (PEF), neutron, and gamma ray (GR) logs provided sufficient...

  20. Logging of subterranean wells using coiled tubing

    SciTech Connect (OSTI)

    Pilla, J.

    1991-01-15

    This patent describes an apparatus for production logging of a well utilizing artificial lift in a wellbore. It comprises: coiled tubing extending into the wellbore having wireline electrical cable passing through a central bore thereof and having a remote end within the wellbore which end is connected to gas injector means. The wireline cable passing through the gas injector means to a flexible electrically conductive support spacer having an end portion remote from the gas injector means and logging means connected to the end portion of the support spacer.

  1. Bone regenerative potential of mesenchymal stem cells on a micro-structured titanium processed by wire-type electric discharge machining

    E-Print Network [OSTI]

    Tamaki, Yukimichi; Miyazaki, Takashi

    2010-01-01

    A new strategy with bone tissue engineering by mesenchymal stem cell transplantation on titanium implant has been dawn attention. The surface scaffold properties of titanium surface play an important role in bone regenerative potential of cells. The surface topography and chemistry are postulated to be two major factors increasing the scaffold properties of titanium implants. This study aimed to evaluate the osteogenic gene expression of mesenchymal stem cells on titanium processed by wire-type electric discharge machining. Some amount of roughness and distinctive irregular features were observed on titanium processed by wire-type electric discharge machining. The thickness of suboxide layer was concomitantly grown during the processing. Since the thickness of oxide film and micro-topography allowed an improvement of mRNA expression of cells, titanium processed by wire-type electric discharge machining is a promising candidate for mesenchymal stem cell based functional restoration of implants.

  2. M01506020006 log check dam

    E-Print Network [OSTI]

    XY! ¬« 35-0027 M01506020006 log check dam M01506020007 log check dam M01506020001 log check dam M location Berm Channel/swale Check dam Sediment trap/basin Gabion Seed and mulch Cap Established vegetation

  3. October 2006 LOG MANAGEMENT: USING

    E-Print Network [OSTI]

    to Computer Security Log Management NIST's Information Technology Laboratory recently issued SpecialOctober 2006 LOG MANAGEMENT: USING COMPUTER AND NETWORK RECORDS TO IMPROVE INFORMATION SECURITY LOG MANAGEMENT: USING COMPUTER AND NETWORK RECORDS TO IMPROVE INFORMATION SECURITY Shirley Radack, Editor

  4. G8 Illegal Logging Dialogue G8 Illegal Logging Dialogue

    E-Print Network [OSTI]

    G8 Illegal Logging Dialogue G8 Illegal Logging Dialogue A global legislator partnership for legal International http://www.illegal-logging.info/item_single.php?item=presentation&item_id=133&approach_id=8 #12;G8 Illegal Logging Dialogue Presentation purpose · role of GLOBE International · aim and objectives of the G8

  5. Knowledge is Power A UT Arlington research associate and electrical engineering professor have designed a micro-windmill that g

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    designed a micro-windmill that g phone batteries constantly in need of recharging and home energy generation where large windmills are not p Smitha Rao and J.-C. Chiao designed and built the device that is about 1.8 mm at its widest point. A single gr windmills could be embedded in a sleeve for a cell phone

  6. NMR logging apparatus

    DOE Patents [OSTI]

    Walsh, David O; Turner, Peter

    2014-05-27

    Technologies including NMR logging apparatus and methods are disclosed. Example NMR logging apparatus may include surface instrumentation and one or more downhole probes configured to fit within an earth borehole. The surface instrumentation may comprise a power amplifier, which may be coupled to the downhole probes via one or more transmission lines, and a controller configured to cause the power amplifier to generate a NMR activating pulse or sequence of pulses. Impedance matching means may be configured to match an output impedance of the power amplifier through a transmission line to a load impedance of a downhole probe. Methods may include deploying the various elements of disclosed NMR logging apparatus and using the apparatus to perform NMR measurements.

  7. Logging in to Franklin

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesse BergkampCenter (LMI-EFRC)Lodging Lodging Meeting Hotel -LoggingLogging

  8. Multipole seismoelectric logging while drilling (LWD) for acoustic velocity measurements

    E-Print Network [OSTI]

    Zhu, Zhenya

    2012-01-01

    In seismoelectric well logging, an acoustic wave propagates along a borehole and induces electrical signals along the borehole wall. The apparent velocities of these seismoelectric signals are equal to the formation ...

  9. ILLEGAL LOGGING IN INDONESIA

    E-Print Network [OSTI]

    to feed the country's enormous timber processing mills. Indonesia's paper and pulp industry has a record products. The U.S. Bureau of Labor Statistics reports that the logging, wood, paper and cabinetry industries have lost 242,000 jobs, or roughly 23 percent of its workforce, since 2006.viii Conservative

  10. Internet Data logging and Display 

    E-Print Network [OSTI]

    Sweeney, J., Jr.; Culp, C.; Haberl, J. S.

    2001-01-01

    The current energy savings technology relies on conventional data logging systems, in which two major barriers exist. Formost is the fact that retrieving the energy data is not convenient, and the cost of the data logging ...

  11. Multi-Agent Based Techniques for Coordinating the Distribution of Electricity in a Micro-Grid Environment

    E-Print Network [OSTI]

    Southampton, University of

    . 2 Background Research To reduce carbon emissions and ensure that the UK low car- bon emissions plan to the current national grid, the in- creasing demand for electricity will only result in more car- bon emissions carbon emissions. In order to ensure that this challenging low carbon emissions plan is met, not only

  12. Physical model construction for electrical anisotropy of single crystal zinc oxide micro/nanobelt using finite element method

    SciTech Connect (OSTI)

    Yu, Guangbin [The Higher Educational Key Laboratory for Measuring and Control Technology and Instrumentations of Heilongjiang Province, Harbin University of Science and Technology, Harbin 150080 (China); Tang, Chaolong [Department of Metallurgical and Materials Engineering, Center for Materials for Information Technology (MINT), University of Alabama, Tuscaloosa, Alabama 35487 (United States); Song, Jinhui, E-mail: jhsong@eng.ua.edu, E-mail: wqlu@cigit.ac.cn [The Higher Educational Key Laboratory for Measuring and Control Technology and Instrumentations of Heilongjiang Province, Harbin University of Science and Technology, Harbin 150080 (China); Chongqing Institute of Green and Intelligent Technology, Chinese Academy of Sciences, Chongqing 400714 (China); Department of Metallurgical and Materials Engineering, Center for Materials for Information Technology (MINT), University of Alabama, Tuscaloosa, Alabama 35487 (United States); Lu, Wenqiang, E-mail: jhsong@eng.ua.edu, E-mail: wqlu@cigit.ac.cn [Chongqing Institute of Green and Intelligent Technology, Chinese Academy of Sciences, Chongqing 400714 (China)

    2014-04-14

    Based on conductivity characterization of single crystal zinc oxide (ZnO) micro/nanobelt (MB/NB), we further investigate the physical mechanism of nonlinear intrinsic resistance-length characteristic using finite element method. By taking the same parameters used in experiment, a model of nonlinear anisotropic resistance change with single crystal MB/NB has been deduced, which matched the experiment characterization well. The nonlinear resistance-length comes from the different electron moving speed in various crystal planes. As the direct outcome, crystallography of the anisotropic semiconducting MB/NB has been identified, which could serve as a simple but effective method to identify crystal growth direction of single crystal semiconducting or conductive nanomaterial.

  13. Logging in to Edison

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesse BergkampCenter (LMI-EFRC)Lodging Lodging Meeting Hotel -Logging

  14. Coiled-tubing logging system

    SciTech Connect (OSTI)

    Howell, E.P.; Smith, L.J.; Blount, C.G.

    1988-03-01

    Techniques have been developed to use coiled tubing containing a seven-conductor wireline to facilitate logging operations. Equipment has been designed to permit the connection of conventional logging tools to the tubing and the recording of logs. Operating techniques have been developed and applied under various wellbore conditions. The system allows traditional log measurements in a well while wellbore conditions are controlled. Advantages of the system include reduced wellbore pressure during peroration to maximize perforation performance; lubrication during pulling or pushing a logging tool through a borehole so that a more uniform velocity can be maintained with a logging sonde; continued circulation and thus borehole stability during logging; temperature reduction for improved reliability of logging sonde electronics in hot holes; and more stable positioning of perforation equipment. The ability of coiled tubing to push tools down highly deviated or horizontal wellbores makes logging or perforating feasible in these wells. Expenses can often be reduced with coiled-tubing logging because a rig is unnecessary during many operations.

  15. Coiled-tubing logging system

    SciTech Connect (OSTI)

    Howell, E.P.; Smith, L.J.; Blount, C.G.

    1986-01-01

    Techniques have been developed which use coiled tubing containing a seven-conductor wireline to facilitate logging operations. Equipment has been designed which permits the connection of conventional logging tools to the tubing and the recording of logs. Also, operating techniques have been developed and applied under various wellbore conditions. The system allows traditional log measurements in a well while controlling wellbore conditions. Advantages of the system include: reduced wellbore pressure during perforation to minimize formation damage: lubrication while pulling or pushing a logging tool through a borehole so that a more uniform velocity can be maintained with a logging sonde; continued circulation and thus borehole stability while logging; temperature reduction for improved reliability of logging sonde electronics in hot holes; and more stable positioning of perforation equipment. The ability of coiled tubing to push tools down highly deviated, or even horizontal wellbores, makes logging or perforating feasible in these wells. Expenses can often be reduced with coiled-tubing logging, since a rig is unnecessary during many operations.

  16. Probabilistic electrical resistivity tomography of a CO2 sequestration analog

    E-Print Network [OSTI]

    Lochbühler, T; Breen, SJ; Detwiler, RL; Vrugt, JA; Linde, N

    2014-01-01

    Archie, G.E. , 1942. The electrical resistivity log as anexperiments to evaluate electrical resistivity tomography asmodel- ing and inversion of electrical resistance and gas

  17. Thermoelectric properties of nano-meso-micro ?-MnO? powders as a function of electrical resistance

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hedden, Morgan; Francis, Nick; Haraldsen, Jason T.; Ahmed, Towfiq; Constantin, Costel

    2015-07-15

    Particle sizes of manganese oxide (?-MnO?) powders were modified by using a mortar and pestle ground method for period of times that varied between 15–60 min. Particle size versus ground time clearly shows the existence of a size-induced regime transition (i.e., regime I and II). Thermoelectric properties of ?-MnO? powders as a function of electrical resistance in the range of RP = 10 - 80? were measured. Based on the data presented, we propose a model for the ?-MnO? system in which nanometer-scale MnO? crystallites bond together through weak van der Waals forces to form larger conglomerates that span inmore »size from nanometer to micrometer scale.« less

  18. Thermoelectric properties of nano-meso-micro ?-MnO? powders as a function of electrical resistance

    SciTech Connect (OSTI)

    Hedden, Morgan; Francis, Nick; Haraldsen, Jason T.; Ahmed, Towfiq; Constantin, Costel

    2015-07-15

    Particle sizes of manganese oxide (?-MnO?) powders were modified by using a mortar and pestle ground method for period of times that varied between 15–60 min. Particle size versus ground time clearly shows the existence of a size-induced regime transition (i.e., regime I and II). Thermoelectric properties of ?-MnO? powders as a function of electrical resistance in the range of RP = 10 - 80? were measured. Based on the data presented, we propose a model for the ?-MnO? system in which nanometer-scale MnO? crystallites bond together through weak van der Waals forces to form larger conglomerates that span in size from nanometer to micrometer scale.

  19. ELECTRIC

    Office of Legacy Management (LM)

    you nay give us will be greatly uppreckted. VPry truly your23, 9. IX. Sin0j3, Mtinager lclectronics and Nuclear Physics Dept. omh , WESTINGHOUSE-THE NAT KING IN ELECTRICITY...

  20. Acoustic paramagnetic logging tool

    DOE Patents [OSTI]

    Vail, III, William B. (Bothell, WA)

    1988-01-01

    New methods and apparatus are disclosed which allow measurement of the presence of oil and water in geological formations using a new physical effect called the Acoustic Paramagnetic Logging Effect (APLE). The presence of petroleum in formation causes a slight increase in the earth's magnetic field in the vicinity of the reservoir. This is the phenomena of paramagnetism. Application of an acoustic source to a geological formation at the Larmor frequency of the nucleons present causes the paramagnetism of the formation to disappear. This results in a decrease in the earth3 s magnetic field in the vicinity of the oil bearing formation. Repetitively frequency sweeping the acoustic source through the Larmor frequency of the nucleons present (approx. 2 kHz) causes an amplitude modulation of the earth's magnetic field which is a consequence of the APLE. The amplitude modulation of the earth's magnetic field is measured with an induction coil gradiometer and provides a direct measure of the amount of oil and water in the excitation zone of the formation . The phase of the signal is used to infer the longitudinal relaxation times of the fluids present, which results in the ability in general to separate oil and water and to measure the viscosity of the oil present. Such measurements may be preformed in open boreholes and in cased well bores.

  1. Formation Micro-Imager Logs (FMI) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePowerEdistoWhiskeyFootprint Ventures Jump to:45

  2. LOG HAZARD REGRESSION Huiying Sun

    E-Print Network [OSTI]

    Heckman, Nancy E.

    LOG HAZARD REGRESSION by Huiying Sun Ph.D, Harbin Institute of Technology, Harbin, CHINA, 1991 .................................................................... .................................................................... .................................................................... .................................................................... THE UNIVERSITY OF BRITISH COLUMBIA September, 1999 c flHuiying Sun, 1999 #12; Abstract We propose using

  3. ELECTRIC

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE-SessionsSouth DakotaRobbins and Myers CoMadison -T: Designation ofSEPE.ELECTRIC

  4. Micro acoustic spectrum analyzer

    DOE Patents [OSTI]

    Schubert, W. Kent; Butler, Michael A.; Adkins, Douglas R.; Anderson, Larry F.

    2004-11-23

    A micro acoustic spectrum analyzer for determining the frequency components of a fluctuating sound signal comprises a microphone to pick up the fluctuating sound signal and produce an alternating current electrical signal; at least one microfabricated resonator, each resonator having a different resonant frequency, that vibrate in response to the alternating current electrical signal; and at least one detector to detect the vibration of the microfabricated resonators. The micro acoustic spectrum analyzer can further comprise a mixer to mix a reference signal with the alternating current electrical signal from the microphone to shift the frequency spectrum to a frequency range that is a better matched to the resonant frequencies of the microfabricated resonators. The micro acoustic spectrum analyzer can be designed specifically for portability, size, cost, accuracy, speed, power requirements, and use in a harsh environment. The micro acoustic spectrum analyzer is particularly suited for applications where size, accessibility, and power requirements are limited, such as the monitoring of industrial equipment and processes, detection of security intrusions, or evaluation of military threats.

  5. Health Calculators & Logs - HPMC Occupational Health Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Calculators & Logs Health Education & Wellness Downloads & Patient Materials Health & Productivity Health Calculators & Logs Body Mass Index Health Coaching Health Fairs and...

  6. Transport coefficients in high temperature gauge theories: (I) Leading-log results

    E-Print Network [OSTI]

    Peter Arnold; Guy D. Moore; Laurence G. Yaffe

    2000-10-16

    Leading-log results are derived for the shear viscosity, electrical conductivity, and flavor diffusion constants in both Abelian and non-Abelian high temperature gauge theories with various matter field content.

  7. briefing paper Controlling Illegal Logging

    E-Print Network [OSTI]

    -producing countries, the inclusion of provisions on illegal logging in free trade agreements (in the US­Peru Free Trade Agreement for example), and public procurement policies for timber.4 Within Europe, discussion has to control imports of illegal timber. The EU's Action Plan on Forest Law Enforcement, Governance and Trade

  8. Chemical logging of geothermal wells

    DOE Patents [OSTI]

    Allen, Charles A. (Idaho Falls, ID); McAtee, Richard E. (Idaho Falls, ID)

    1981-01-01

    The presence of geothermal aquifers can be detected while drilling in geothermal formations by maintaining a chemical log of the ratio of the concentrations of calcium to carbonate and bicarbonate ions in the return drilling fluid. A continuous increase in the ratio of the concentrations of calcium to carbonate and bicarbonate ions is indicative of the existence of a warm or hot geothermal aquifer at some increased depth.

  9. Energy Citations Database (ECD) - Alerts Log On

    Office of Scientific and Technical Information (OSTI)

    Log On You must Log On to use the ECD Alerts. Alerts provide users with e-mail notification of updates to the ECD in specific areas of interest. If you wish to receive an Alert and...

  10. Bivariate Log Birnbaum-Saunders Distribution

    E-Print Network [OSTI]

    Kundu, Debasis

    Bivariate Log Birnbaum-Saunders Distribution Debasis Kundu1 Abstract Univariate Birnbaum-Saunders distribution has received a considerable amount of attention in recent years. Rieck and Nedelman (1991, 'A log-linear model for the Birnbaum-Saunders distribution', Technometrics, 51-60) introduced a log Birnbaum- Saunders

  11. Numerical simulation of electrokinetically driven micro flows 

    E-Print Network [OSTI]

    Hahm, Jungyoon

    2005-11-01

    are systematically studied. As a first application, flow and species transport control in a grooved micro-channel using local electrokinetic forces are studied. Locally applied electric fields, zeta potential patterned grooved surfaces, and geometry are manipulated...

  12. Log interpretation of shaly sandstones 

    E-Print Network [OSTI]

    Baker, Joel Foster

    1987-01-01

    and Gas, Arco Oil and Gas, and Sun Oil Companies for their contributions of cores, logs, and other valuable data. Their contributions were an immense help in formulating and supporting the ideas developed in my study. I also wish to express gratitute... from the Reese Oil and Gas Intracoastal Land ?2 well in the Bayou Cholpe field, West Baton Parish, Louisiana, and from the Arco Hankamer 630-1 well in Newton County, Texas. The cores were described and sampled for petrographic analysis. To determine...

  13. Mud Logging | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceII Jump to: navigation, searchsource HistoryCharleston,Peak UtilityLogging Jump to:

  14. Chemical Logging | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButte County,Camilla,Thermal GradientChateau Tebeau LLC Jump to:ConsortiumLogging

  15. 1/14/14 Technologyuses micro-windmills to recharge cell phones www.rdmag.com/news/2014/01/technology-uses-micro-windmills-recharge-cell-phones 1/10

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    1/14/14 Technologyuses micro-windmills to recharge cell phones www.rdmag.com/news/2014/01/technology-uses-micro-windmills-recharge-cell-phones 1/10 ADVERTISEMENT LOG IN REGISTERFIND MY COMPANY News ADVERTISEMENT Technology uses micro-windmills to recharge cell phones Mon, 01/13/2014 - 9:06am Get today's R

  16. Leak checker data logging system

    DOE Patents [OSTI]

    Gannon, J.C.; Payne, J.J.

    1996-09-03

    A portable, high speed, computer-based data logging system for field testing systems or components located some distance apart employs a plurality of spaced mass spectrometers and is particularly adapted for monitoring the vacuum integrity of a long string of a superconducting magnets such as used in high energy particle accelerators. The system provides precise tracking of a gas such as helium through the magnet string when the helium is released into the vacuum by monitoring the spaced mass spectrometers allowing for control, display and storage of various parameters involved with leak detection and localization. A system user can observe the flow of helium through the magnet string on a real-time basis hour the exact moment of opening of the helium input valve. Graph reading can be normalized to compensate for magnet sections that deplete vacuum faster than other sections between testing to permit repetitive testing of vacuum integrity in reduced time. 18 figs.

  17. Leak checker data logging system

    DOE Patents [OSTI]

    Gannon, Jeffrey C. (Arlington, TX); Payne, John J. (Waterman, IL)

    1996-01-01

    A portable, high speed, computer-based data logging system for field testing systems or components located some distance apart employs a plurality of spaced mass spectrometers and is particularly adapted for monitoring the vacuum integrity of a long string of a superconducting magnets such as used in high energy particle accelerators. The system provides precise tracking of a gas such as helium through the magnet string when the helium is released into the vacuum by monitoring the spaced mass spectrometers allowing for control, display and storage of various parameters involved with leak detection and localization. A system user can observe the flow of helium through the magnet string on a real-time basis hour the exact moment of opening of the helium input valve. Graph reading can be normalized to compensate for magnet sections that deplete vacuum faster than other sections between testing to permit repetitive testing of vacuum integrity in reduced time.

  18. Micro Hydro 1 Micro Hydro Power.

    E-Print Network [OSTI]

    Micro Hydro 1 Micro Hydro Power. Andrew Cannard, Andrew Gonzales, Candace Kaiser. Using recycled materials we will be building a Mini Micro hydro system. Using a rear bicycle tire for the turbine we and implementation of permanent micro hydro systems on campus. Renewable energy is a key aspect of any plan to make

  19. Integration of Distributed Energy The CERTS MicroGrid Concept

    E-Print Network [OSTI]

    Resources The MicroGrid Concept Appendices Prepared for Transmission Reliability Program Office of PowerIntegration of Distributed Energy Resources The CERTS MicroGrid Concept CALIFORNIA ENERGY;Preface The U.S. Electricity Grid Today The U.S. electric power system is in the midst of a fundamental

  20. Log-Sobolev inequalities for subelliptic operators

    E-Print Network [OSTI]

    Fabrice Baudoin

    2012-02-07

    Log-Sobolev inequalities for subelliptic operators. Fabrice Baudoin. Purdue University. Georgia Tech Probability Seminar. Based on a joint work with M.

  1. Shippers in Indonesia fight decree on illegal logging Shippers in Indonesia fight decree on illegal logging

    E-Print Network [OSTI]

    Shippers in Indonesia fight decree on illegal logging Shippers in Indonesia fight decree on illegal Organization (ITTO), shippers in Indonesia are threatening to stop transporting logs if the government insists harvesting affects 700,000-850,000 hectares of forest per year in Indonesia, but widespread illegal logging

  2. Illegal timber logging in Vietnam: Who profits from forest privatization connected with a logging ban?

    E-Print Network [OSTI]

    1 Illegal timber logging in Vietnam: Who profits from forest privatization connected with a logging the distribution of income from illegal timber logging in northern Vietnam. The Vietnamese government implemented actors' control over markets and power derived from state positions. I. Introduction Vietnam's forest

  3. Biomass from Logging Residue and Mill Residue

    E-Print Network [OSTI]

    Biomass from Logging Residue and Mill Residue in East Texas, 2008 by Curtis L. VanderSchaaf, Forest Resource Analyst October 2009 #12;N Introduction The abundance of woody biomass from East Texas forests. This report represents the most current data on the availability of woody biomass in the form of logging

  4. Coal-log pipeline system development

    SciTech Connect (OSTI)

    Liu, H.

    1991-12-01

    Project tasks include: (1) Perform the necessary testing and development to demonstrate that the amount of binder in coal logs can be reduced to 8% or lower to produce logs with adequate strength to eliminate breakage during pipeline transportation, under conditions experienced in long distance pipeline systems. Prior to conducting any testing and demonstration, grantee shall perform an information search and make full determination of all previous attempts to extrude or briquette coal, upon which the testing and demonstration shall be based. (2) Perform the necessary development to demonstrate a small model of the most promising injection system for coal-logs, and tests the logs produced. (3) Conduct economic analysis of coal-log pipeline, based upon the work to date. Refine and complete the economic model. (VC)

  5. Galaxy rotation curves with log-normal density distribution

    E-Print Network [OSTI]

    Marr, John H

    2015-01-01

    The log-normal distribution represents the probability of finding randomly distributed particles in a micro canonical ensemble with high entropy. To a first approximation, a modified form of this distribution with a truncated termination may represent an isolated galactic disk, and this disk density distribution model was therefore run to give the best fit to the observational rotation curves for 37 representative galaxies. The resultant curves closely matched the observational data for a wide range of velocity profiles and galaxy types with rising, flat or descending curves in agreement with Verheijen's classification of 'R', 'F' and 'D' type curves, and the corresponding theoretical total disk masses could be fitted to a baryonic Tully Fisher relation (bTFR). Nine of the galaxies were matched to galaxies with previously published masses, suggesting a mean excess dynamic disk mass of dex0.61+/-0.26 over the baryonic masses. Although questionable with regard to other measurements of the shape of disk galaxy g...

  6. Enormous sums of money are invested by industry and scientific funding agencies every year in seismic, well log-

    E-Print Network [OSTI]

    in seismic, well log- ging, electromagnetic, earthquake monitoring and micro- seismic surveys, and in laboratory-based experiments. For each survey or experiment a design process must first take place. An efficient design is usually a compromise--a suit- able trade-off between information that is expected

  7. Micro-sonicator for spore lysis

    DOE Patents [OSTI]

    Miles, Robin R. (Livermore, CA); Belgrader, Phillip (Manteca, CA); Nasarabadi, Shanavaz L. (Livermore, CA)

    2000-01-01

    A micro-sonicator for spore lysis. Using micromachining technology, the micro-sonicator uses ultrasonic excitation of spores to perform spore and cell lysis. The micro-sonicator comprises a container with a cavity therein for retaining the sample in an ultrasonic transmission medium, the cavity being closed by a silicon membrane to which an electrode and piezoelectric material are attached, with the electrode and piezoelectric material being electrically connected to an AC signal generator which causes the membrane to flex and vibrate at the frequency of the applied voltage.

  8. Formation mechanical properties and the sonic log

    SciTech Connect (OSTI)

    Elphick, R.Y.

    1988-11-01

    A program is presented that calculates the mechanical properties of reservoir rocks from sonic logs. The program was written in Microsoft BASIC and the source code for MS-DOS, Apple Macintosh, and Amiga personal computers is given.

  9. JourneyLog 64 5 Vehicle tracking

    E-Print Network [OSTI]

    Haddadi, Hamed

    JourneyLog 64 5 Vehicle tracking blinkx 8 Five years on Tomas Pfister 11 Graduate story Raspberry Pi 12 Exciting and engaging children to learn about computing Ring news 2 Note from the Editor

  10. Energy Citations Database (ECD) - Alerts Log On

    Office of Scientific and Technical Information (OSTI)

    ECD Alerts Log On Alerts provide users with e-mail notification of updates to the ECD in specific areas of interest. If you wish to receive an Alert and are not registered, please...

  11. Logging-while-coring method and apparatus

    DOE Patents [OSTI]

    Goldberg, David S.; Myers, Gregory J.

    2007-01-30

    A method and apparatus for downhole coring while receiving logging-while-drilling tool data. The apparatus includes core collar and a retrievable core barrel. The retrievable core barrel receives core from a borehole which is sent to the surface for analysis via wireline and latching tool The core collar includes logging-while-drilling tools for the simultaneous measurement of formation properties during the core excavation process. Examples of logging-while-drilling tools include nuclear sensors, resistivity sensors, gamma ray sensors, and bit resistivity sensors. The disclosed method allows for precise core-log depth calibration and core orientation within a single borehole, and without at pipe trip, providing both time saving and unique scientific advantages.

  12. Logging-while-coring method and apparatus

    DOE Patents [OSTI]

    Goldberg, David S. (New York, NY); Myers, Gregory J. (Cornwall, NY)

    2007-11-13

    A method and apparatus for downhole coring while receiving logging-while-drilling tool data. The apparatus includes core collar and a retrievable core barrel. The retrievable core barrel receives core from a borehole which is sent to the surface for analysis via wireline and latching tool The core collar includes logging-while-drilling tools for the simultaneous measurement of formation properties during the core excavation process. Examples of logging-while-drilling tools include nuclear sensors, resistivity sensors, gamma ray sensors, and bit resistivity sensors. The disclosed method allows for precise core-log depth calibration and core orientation within a single borehole, and without at pipe trip, providing both time saving and unique scientific advantages.

  13. Energy Efficiency in Log Homes | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Efficiency in Log Homes Energy Efficiency in Log Homes April 13, 2012 - 11:29am Addthis Consider energy efficiency when designing or purchasing a log home. | Photo courtesy...

  14. Density Log At Valles Caldera - Redondo Geothermal Area (Wilt...

    Open Energy Info (EERE)

    Density Log At Valles Caldera - Redondo Geothermal Area (Wilt & Haar, 1986) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Density Log At Valles...

  15. Well Log Data At Valles Caldera - Redondo Geothermal Area (Shevenell...

    Open Energy Info (EERE)

    Well Log Data At Valles Caldera - Redondo Geothermal Area (Shevenell, Et Al., 1988) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Well Log Data...

  16. Green Energy Resources Inc formerly New York International Log...

    Open Energy Info (EERE)

    Green Energy Resources Inc formerly New York International Log Lumber Company Jump to: navigation, search Name: Green Energy Resources Inc (formerly New York International Log &...

  17. Well Log Data At Blue Mountain Geothermal Area (Fairbank & Niggemann...

    Open Energy Info (EERE)

    Well Log Data At Blue Mountain Geothermal Area (Fairbank & Niggemann, 2004) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Well Log Data At Blue...

  18. Method and apparatus for actively controlling a micro-scale flexural plate wave device

    DOE Patents [OSTI]

    Dohner, Jeffrey L. (Albuquerque, NM)

    2001-01-01

    An actively controlled flexural plate wave device provides a micro-scale pump. A method of actively controlling a flexural plate wave device produces traveling waves in the device by coordinating the interaction of a magnetic field with actively controlled currents. An actively-controlled flexural plate wave device can be placed in a fluid channel and adapted for use as a micro-scale fluid pump to cool or drive micro-scale systems, for example, micro-chips, micro-electrical-mechanical devices, micro-fluid circuits, or micro-scale chemical analysis devices.

  19. Combating Illegal LoggingCombating Illegal Logging in Russia:in Russia

    E-Print Network [OSTI]

    the creation of special body for licensing export operations · changes in the Federal Crime Code #12;RUSSIACombating Illegal LoggingCombating Illegal Logging in Russia:in Russia: Case study ofCase study of PrimorskyPrimorsky RegionRegion AlexeyAlexey MorozovMorozov Greenpeace RussiaGreenpeace Russia http://www

  20. Combating Illegal LoggingCombating Illegal Logging in Russia:in Russia

    E-Print Network [OSTI]

    of special body for licensing export operations · changes in the Federal Crime Code #12;RUSSIA ...A barbarianCombating Illegal LoggingCombating Illegal Logging in Russia:in Russia: Case study ofCase study of PrimorskyPrimorsky RegionRegion AlexeyAlexey MorozovMorozov Greenpeace RussiaGreenpeace Russia #12;Primorsky

  1. The Impact of the Russian Log Export Tariff on the Global Market for Logs and Lumber

    E-Print Network [OSTI]

    The Impact of the Russian Log Export Tariff on the Global Market for Logs and Lumber CINTRAFOR News's Notes ....2 CINTRAFOR celebrates 25th aniversary Winter 2009 Russia contains the largest area of natural in Russia, estimated at 808,790,000 hectares, represents 20.5% of total global forest area and almost half

  2. A thermally efficient micro-reactor for thermophotovoltaic power generation

    E-Print Network [OSTI]

    Nielsen, Ole Mattis, 1977-

    2006-01-01

    Hydrocarbon fuels exhibit very high energy densities, and micro-generators converting the stored chemical energy into electrical power are interesting alternatives to batteries in certain applications. The increasing demands ...

  3. Permeability extraction: A sonic log inversion

    SciTech Connect (OSTI)

    Akbar, N.; Kim, J.J. [Saudi Aramco, Dhahran (Saudi Arabia)

    1994-12-31

    In this paper the authors provide the missing important link between permeability and acoustic velocities by generating a permeability-dependent synthetic sonic log in a carbonate reservoir. The computations are based on Akbar`s theory that relates wave velocity to frequency, rock properties (e.g., lithology, permeability, and porosity), and fluid saturation and properties (viscosity, density, and compressibility). An inverted analytical expression of the theory is used to extract permeability from sonic velocity. The synthetic sonic and the computed permeability are compared with the observed sonic log and with plug permeability, respectively. The results demonstrate, as predicted by theory, that permeability can be related directly to acoustic velocities.

  4. Using Electricity",,,"Electricity Consumption",,,"Electricity...

    U.S. Energy Information Administration (EIA) Indexed Site

    . Total Electricity Consumption and Expenditures, 2003" ,"All Buildings* Using Electricity",,,"Electricity Consumption",,,"Electricity Expenditures" ,"Number of Buildings...

  5. Diagnostic system for profiling micro-beams

    DOE Patents [OSTI]

    Elmer, John W. (Danville, CA); Palmer, Todd A. (Livermore, CA); Teruya, Alan T. (Livermore, CA); Walton, Chris C. (Berkeley, CA)

    2007-10-30

    An apparatus for characterization of a micro beam comprising a micro modified Faraday cup assembly including a first layer of material, a second layer of material operatively connected to the first layer of material, a third layer of material operatively connected to the second layer of material, and a fourth layer of material operatively connected to the third layer of material. The first layer of material comprises an electrical conducting material and has at least one first layer radial slit extending through the first layer. An electrical ground is connected to the first layer. The second layer of material comprises an insulating material and has at least one second layer radial slit corresponding to the first layer radial slit in the first layer of material. The second layer radial slit extends through the second layer. The third layer of material comprises a conducting material and has at least one third layer radial slit corresponding to the second layer radial slit in the second layer of material. The third layer radial slit extends through the third layer. The fourth layer of material comprises an electrical conducting material but does not have slits. An electrical measuring device is connected to the fourth layer. The micro modified Faraday cup assembly is positioned to be swept by the micro beam.

  6. Biomass from Logging Residue and Mill Residue

    E-Print Network [OSTI]

    as a renewable energy resource or for chemical extraction. This report represents the most current data harvesting or are cut off the central stem of the tree due to a merchantability standard. Limbs refer for energy production or chemical extraction. Table 1 shows the logging residue available in East Texas

  7. INSPIRE and SPIRES Log File Analysis

    SciTech Connect (OSTI)

    Adams, Cole; /Wheaton Coll. /SLAC

    2012-08-31

    SPIRES, an aging high-energy physics publication data base, is in the process of being replaced by INSPIRE. In order to ease the transition from SPIRES to INSPIRE it is important to understand user behavior and the drivers for adoption. The goal of this project was to address some questions in regards to the presumed two-thirds of the users still using SPIRES. These questions are answered through analysis of the log files from both websites. A series of scripts were developed to collect and interpret the data contained in the log files. The common search patterns and usage comparisons are made between INSPIRE and SPIRES, and a method for detecting user frustration is presented. The analysis reveals a more even split than originally thought as well as the expected trend of user transition to INSPIRE.

  8. Chiral Gravity, Log Gravity and Extremal CFT

    E-Print Network [OSTI]

    Alexander Maloney; Wei Song; Andrew Strominger

    2009-03-26

    We show that the linearization of all exact solutions of classical chiral gravity around the AdS3 vacuum have positive energy. Non-chiral and negative-energy solutions of the linearized equations are infrared divergent at second order, and so are removed from the spectrum. In other words, chirality is confined and the equations of motion have linearization instabilities. We prove that the only stationary, axially symmetric solutions of chiral gravity are BTZ black holes, which have positive energy. It is further shown that classical log gravity-- the theory with logarithmically relaxed boundary conditions --has finite asymptotic symmetry generators but is not chiral and hence may be dual at the quantum level to a logarithmic CFT. Moreover we show that log gravity contains chiral gravity within it as a decoupled charge superselection sector. We normally evaluate the Euclidean sum over geometries of chiral gravity and show that it gives precisely the holomorphic extremal CFT partition function. The modular invariance and integrality of the expansion coefficients of this partition function are consistent with the existence of an exact quantum theory of chiral gravity. We argue that the problem of quantizing chiral gravity is the holographic dual of the problem of constructing an extremal CFT, while quantizing log gravity is dual to the problem of constructing a logarithmic extremal CFT.

  9. Vacuum-ultraviolet photoreduction of graphene oxide: Electrical...

    Office of Scientific and Technical Information (OSTI)

    Vacuum-ultraviolet photoreduction of graphene oxide: Electrical conductivity of entirely reduced single sheets and reduced micro line patterns Citation Details In-Document Search...

  10. Acoustic Waveform Logging - Advances In Theory And Application

    E-Print Network [OSTI]

    Cheng, C. H.

    Full-waveform acoustic logging has made significant advances in both theory and application in recent years, and these advances have greatly increased the capability of log analysts to measure the physical properties of ...

  11. MicroSight Optics

    ScienceCinema (OSTI)

    None

    2013-05-28

    MicroSight is an innovative gunsight technology that allows a marksman's eye to focus on both the front gunsight and the intended target. The MicroSight improves both firearm safety and performance by imaging two objects at different focal distances. The MicroSight was developed at Idaho National Laboratory, and has been licensed by Apollo Optical Systems. You can learn more about INL's research programs at http://www.facebook.com/idahonationallaboratory.

  12. An Oblivious Transfer Protocol with Log-Squared Communication

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    An Oblivious Transfer Protocol with Log-Squared Communication Helger Lipmaa 1 Cybernetica AS, Lai 6-computation and communication (k · log2 n + · log n), where k is a possibly non-constant security parameter. The new proto- col communication and is private in the standard complexity-theoretic model. Keywords. Computationally

  13. An Oblivious Transfer Protocol with LogSquared Communication

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    An Oblivious Transfer Protocol with Log­Squared Communication Helger Lipmaa 1 Cybernetica AS, Lai 6­computation and communication #(k · log 2 n + # · log n), where k is a possibly non­constant security parameter. The new proto the same asymptotic communication and is private in the standard complexity­theoretic model. Keywords

  14. Incorporating Seasonality into Search Suggestions Derived from Intranet Query Logs

    E-Print Network [OSTI]

    Kruschwitz, Udo

    Incorporating Seasonality into Search Suggestions Derived from Intranet Query Logs Stephen Dignum performed on query logs collected for major Web search engines, query log analysis to enhance search search engine can be enhanced by adapting the search system to real users' search behaviour through

  15. Micro Actuators Electrostatic actuator

    E-Print Network [OSTI]

    Leu, Tzong-Shyng "Jeremy"

    is superior to the alloy CuZnAl. ·Most of SMA materials used in micro devices are TiNi (Nitinol). (IV) Work

  16. Micro-windmills to Power up Your Phone and Posted by By Patty at 25 January, at 17 : 49 PM Print

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    Micro-windmills to Power up Your Phone and More Posted by By Patty at 25 January, at 17 : 49 PM. _____________________________________________________________________________________ Based on recent advances in micro-robotic devices, the micro-windmill technology was developed will be used to charge cell phone batteries. The micro windmills generates electric power from ambient wind

  17. Test results of a corrosion logging technique using electromagnetic thickness and pipe analysis logging tools

    SciTech Connect (OSTI)

    Iliyan, I.S.; Brown, G.A.; Cotton, W.J. Jr.

    1983-04-01

    Recent innovations in subsurface corrosion practices of the Arabian American Oil Co. (ARAMCO) have reduced logging and workover costs substantially and have permitted the detection of corrosion in the outer string of two concentric casing strings. At the request of ARAMCO, Schlumberger conducted test under both simulated and field conditions. Results showed that the data required to evaluate casing corrosion in a 7-in.X9 5/8-in. completion can be obtained during a single logging run using a 21.6-in. coil spacing electromagnetic thickness tool (ETT-A /SUP TM/ ) sonde (as opposed to two runs with 17.6-in. and 21.6-in. sondes previously used). In addition, corrosion of the outer string of 9 5/8-in. or 13 3/8-in. casing can be detected by using the results of the ETT-A logs and pipe-analysis tool (PAT) logs or caliper logs. To date, the application of this technique has been very successful in ARAMCO's operations.

  18. Design, Analysis and Development of Micro Gas Turbine for propulsion of Micro UAVs Micro gas turbines or simply micro turbines are very promising technology for propelling micro

    E-Print Network [OSTI]

    Sun, Yu

    Design, Analysis and Development of Micro Gas Turbine for propulsion of Micro UAVs Micro gas turbines or simply micro turbines are very promising technology for propelling micro unmanned aerial vehicles. These micro turbines vary in size and power. They can be hand held producing a fraction

  19. Using Electricity",,,"Electricity Consumption",,,"Electricity...

    U.S. Energy Information Administration (EIA) Indexed Site

    A. Total Electricity Consumption and Expenditures for All Buildings, 2003" ,"All Buildings Using Electricity",,,"Electricity Consumption",,,"Electricity Expenditures" ,"Number of...

  20. Electricity",,,"Electricity Consumption",,,"Electricity Expenditures...

    U.S. Energy Information Administration (EIA) Indexed Site

    C9. Total Electricity Consumption and Expenditures, 1999" ,"All Buildings Using Electricity",,,"Electricity Consumption",,,"Electricity Expenditures" ,"Number of Buildings...

  1. Electricity",,,"Electricity Consumption",,,"Electricity Expenditures...

    U.S. Energy Information Administration (EIA) Indexed Site

    DIV. Total Electricity Consumption and Expenditures by Census Division, 1999" ,"All Buildings Using Electricity",,,"Electricity Consumption",,,"Electricity Expenditures" ,"Number...

  2. The Borneo Project : Indonesia Fails to Stop Illegal Logging, Report Says Indonesia Fails to Stop Illegal Logging, Report Says

    E-Print Network [OSTI]

    The Borneo Project : Indonesia Fails to Stop Illegal Logging, Report Says Indonesia Fails to Stop Illegal Logging, Report Says by Irwan Firdaus, The Associated Press January 15th, 2003 JAKARTA, Indonesia -- Corruption in Indonesia's police and military has contributed to a surge in illegal logging that has

  3. Constructing a Balanced, (log(N)/loglog(N))-Diameter Super-Peer Topology for Scalable P2P Systems

    E-Print Network [OSTI]

    Reeves, Douglas S.

    Constructing a Balanced, (log(N)/loglog(N))-Diameter Super-Peer Topology for Scalable P2P Systems Young June Pyun Department of Computer Science North Carolina State University Raleigh, North Carolina yjpyun@unity.ncsu.edu Douglas S. Reeves Departments of Computer Science and Electrical and Computer

  4. Spontaneous Potential Well Log | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-Enhancing CapacityVectren) Jump to:Spill Prevention andWell Log Jump to: navigation,

  5. Cement Bond Log | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmentalBowerbank,CammackFLIR Jump to:RAPIDCavallo Energy JumpCeiling Fan JumpCement Bond Log

  6. Logging in to Cori P1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesse BergkampCenter (LMI-EFRC)Lodging Lodging Meeting Hotel -Logging in

  7. Dual excitation acoustic paramagnetic logging tool

    DOE Patents [OSTI]

    Vail, W.B. III.

    1989-02-14

    New methods and apparatus are disclosed which allow measurement of the presence of oil and water in geological formations using a new physical effect called the Acoustic Paramagnetic Logging Effect (APLE). The presence of petroleum in formation causes a slight increase in the earth's magnetic field in the vicinity of the reservoir. This is the phenomena of paramagnetism. Application of an acoustic source to a geological formation at the Larmor frequency of the nucleons present causes the paramagnetism of the formation to disappear. This results in a decrease in the earth's magnetic field in the vicinity of the oil bearing formation. Repetitively frequency sweeping the acoustic source through the Larmor frequency of the nucleons present (approx. 2 kHz) causes an amplitude modulation of the earth's magnetic field which is a consequence of the APLE. The amplitude modulation of the earth's magnetic field is measured with an induction coil gradiometer and provides a direct measure of the amount of oil and water in the excitation zone of the formation. The phase of the signal is used to infer the longitudinal relaxation times of the fluids present, which results in the ability in general to separate oil and water and to measure the viscosity of the oil present. Such measurements may be performed in open boreholes and in cased well bores. The Dual Excitation Acoustic Paramagnetic Logging Tool employing two acoustic sources is also described. 6 figs.

  8. Dual excitation acoustic paramagnetic logging tool

    DOE Patents [OSTI]

    Vail, III, William B. (Bothell, WA)

    1989-01-01

    New methods and apparatus are disclosed which allow measurement of the presence of oil and water in gelogical formations using a new physical effect called the Acoustic Paramagnetic Logging Effect (APLE). The presence of petroleum in formation causes a slight increase in the earth's magnetic field in the vicinity of the reservoir. This is the phenomena of paramagnetism. Application of an acoustic source to a geological formation at the Larmor frequency of the nucleous present causes the paramagnetism of the formation to disappear. This results in a decrease in the earth's magnetic field in the vicinity of the oil bearing formation. Repetitively frequency sweeping the acoustic source through the Larmor frequency of the nucleons present (approx. 2 kHz) causes an amplitude modulation of the earth's magnetic field which is a consequence of the APLE. The amplitude modulation of the earth's magnetic field is measured with an induction coil gradiometer and provides a direct measure of the amount of oil and water in the excitation zone of the formation. The phase of the signal is used to infer the longitudinal relaxation times of the fluids present, which results in the ability in general to separate oil and water and to measure the viscosity of the oil present. Such measurements may be preformed in open boreholes and in cased well bores. The Dual Excitation Acoustic Paramagnetic Logging Tool employing two acoustic sources is also described.

  9. 2/1/2014 Micro-Windmills Could Power Cell Phones Without Outlets | PopVulture Entertainment Network http://www.popvltr.com/2014/01/micro-windmills-could-power-cell-phones.html 1/3

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    2/1/2014 Micro-Windmills Could Power Cell Phones Without Outlets | PopVulture Entertainment Network http://www.popvltr.com/2014/01/micro-windmills-could-power-cell-phones.html 1/3 3 weeks ago [http-rao-chiao.php] electrical engineering professor designed a micro-windmill that might render urine-powered phones completely

  10. 2/1/2014 TinyMicro-Robotic Windmill Recharges Phone Batteries | The DailyFusion http://dailyfusion.net/2014/01/tiny-micro-windmill-recharges-phone-batteries-25864/ 1/4

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    2/1/2014 TinyMicro-Robotic Windmill Recharges Phone Batteries | The DailyFusion http://dailyfusion.net/2014/01/tiny-micro-windmill-recharges-phone-batteries-25864/ 1/4 Knowledge is Power prev next A UT Arlington research associate and electrical engineering professor have designed a micro-windmill

  11. Micro -Thermonuclear AB-Reactors for Aerospace

    E-Print Network [OSTI]

    Alexander Bolonkin

    2007-01-08

    The author offers several innovations that he first suggested publicly early in 1983 for the AB multi-reflex engine, space propulsion, getting energy from plasma, etc. (see: A. Bolonkin, Non-Rocket Space Launch and Flight, Elsevier, London, 2006, Chapters 12, 3A). It is the micro-thermonuclear AB-Reactors. That is new micro-thermonuclear reactor with very small fuel pellet that uses plasma confinement generated by multi-reflection of laser beam or its own magnetic field. The Lawson criterion increases by hundreds of times. The author also suggests a new method of heating the power-making fuel pellet by outer electric current as well as new direct method of transformation of ion kinetic energy into harvestable electricity. These offered innovations dramatically decrease the size, weight and cost of thermonuclear reactor, installation, propulsion system and electric generator. Non-industrial countries can produce these researches and constructions. Currently, the author is researching the efficiency of these innovations for two types of the micro-thermonuclear reactors: multi-reflection reactor (ICF) and self-magnetic reactor (MCF).

  12. 4/5/2014 Micro-windmill Charger | DailyHome Decor Ideas http://www.dailyhomedecorideas.com/stunning-ideas/micro-windmill-charger/ 1/4

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    Turbine Education GG Design Inspirations Lidar Power Supply Affordable Area Rugs factoryoutletrugs://www.dailyhomedecorideas.com/stunning-ideas/micro-windmill-charger/ 3/4 Where there is the wind, there is the electrical power. Researchers in University of Texas Arlington have developed a ultra-small micro-windmill that is capable of making enough wind power

  13. MicroBooNE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    source of neutrinos for MicroBooNE is BNB; however, the NuMI beam will provide higher electron neutrino and antineutrino event rates and a unique opportunity to study these events....

  14. Energy Efficiency in Log Homes | Department of Energy

    Office of Environmental Management (EM)

    or purchasing a manufactured log home, you should consider several factors related to energy efficiency. The R-Value of Wood A material's thermal resistance or resistance to...

  15. Log-normal distribution for correlators in lattice QCD?

    E-Print Network [OSTI]

    Thomas DeGrand

    2012-04-20

    Many hadronic correlators used in spectroscopy calculations in lattice QCD simulations appear to show a log-normal distribution at intermediate time separations.

  16. Geophysical logging case history of the Raft River geothermal...

    Open Energy Info (EERE)

    5490655 Citation Applegate, J. K.; Moens, T. A. . 411980. Geophysical logging case history of the Raft River geothermal system, Idaho. () : DOE Information Bridge. Related...

  17. Method for determining formation quality factor from well log...

    Office of Scientific and Technical Information (OSTI)

    determining formation quality factor from well log data and its application to seismic reservoir characterization Citation Details In-Document Search Title: Method for...

  18. Chemical Logging At Dixie Valley Geothermal Area (Los Alamos...

    Open Energy Info (EERE)

    Chemical Logging At Dixie Valley Geothermal Area (Los Alamos National Laboratory, NM, 2002) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity:...

  19. Micro-CHP Systems for Residential Applications

    SciTech Connect (OSTI)

    Timothy DeValve; Benoit Olsommer

    2007-09-30

    Integrated micro-CHP (Cooling, Heating and Power) system solutions represent an opportunity to address all of the following requirements at once: conservation of scarce energy resources, moderation of pollutant release into our environment, and assured comfort for home-owners. The objective of this effort was to establish strategies for development, demonstration, and sustainable commercialization of cost-effective integrated CHP systems for residential applications. A unified approach to market and opportunity identification, technology assessment, specific system designs, adaptation to modular product platform component conceptual designs was employed. UTRC's recommendation to U.S. Department of Energy is to go ahead with the execution of the proposed product development and commercialization strategy plan under Phase II of this effort. Recent indicators show the emergence of micro-CHP. More than 12,000 micro-CHP systems have been sold worldwide so far, around 7,500 in 2004. Market projections predict a world-wide market growth over 35% per year. In 2004 the installations were mainly in Europe (73.5%) and in Japan (26.4%). The market in North-America is almost non-existent (0.1%). High energy consumption, high energy expenditure, large spark-spread (i.e., difference between electricity and fuel costs), big square footage, and high income are the key conditions for market acceptance. Today, these conditions are best found in the states of New York, Pennsylvania, New Jersey, Wisconsin, Illinois, Indiana, Michigan, Ohio, New England states. A multiple stage development plan is proposed to address risk mitigation. These stages include concept development and supplier engagement, component development, system integration, system demonstration, and field trials. A two stage commercialization strategy is suggested based on two product versions. The first version--a heat and power system named Micro-Cogen, provides the heat and essential electrical power to the homeowner. In its proposed embodiment, the system has a 2kW prime mover integrated to a furnace platform. The second version is a Micro-Trigen system with heating, cooling and power. It has the same Micro-Cogen platform integrated with a 14kW thermally activated chiller. A Stirling engine is suggested as a promising path for the prime mover. A LiBr absorption chiller is today's best technology in term of readiness level. Paybacks are acceptable for the Micro-Cogen version. However, there is no clear economically viable path for a Micro-Trigen version with today's available technology. This illustrates the importance of financial incentives to home owners in the initial stage of micro-CHP commercialization. It will help create the necessary conditions of volume demand to start transitioning to mass-production and cost reduction. Incentives to the manufacturers will help improve efficiency, enhance reliability, and lower cost, making micro-CHP products more attractive. Successful development of a micro-CHP system for residential applications has the potential to provide significant benefits to users, customers, manufacturers, and suppliers of such systems and, in general, to the nation as a whole. The benefits to the ultimate user are a comfortable and healthy home environment at an affordable cost, potential utility savings, and a reliable supply of energy. Manufacturers, component suppliers, and system integrators will see growth of a new market segment for integrated energy products. The benefits to the nation include significantly increased energy efficiency, reduced consumption of fossil fuels, pollutant and CO{sub 2} emissions from power generation, enhanced security from power interruptions as well as enhanced economic activity and job creation. An integrated micro-CHP energy system provides advantages over conventional power generation, since the energy is used more efficiently by means of efficient heat recovery. Foreign companies are readily selling products, mostly in Europe, and it is urgent to react promptly to these offerings that will soon emerge on the U.S

  20. Subsurface Electrical Measurements at Dixie Valley, Nevada, Using...

    Open Energy Info (EERE)

    Subsurface Electrical Measurements at Dixie Valley, Nevada, Using Single-Well and Surface-to-Well Induction Logging Jump to: navigation, search OpenEI Reference LibraryAdd to...

  1. Micro-turbo-generator design and fabrication: A preliminary study

    SciTech Connect (OSTI)

    Wiegele, T.G.

    1996-12-31

    The size and weight of portable electronic products are often dictated by the physical characteristics of the power supply system. The design of energy storage systems is therefore critical to market competitiveness. An alternative to energy storage is proposed in this paper which relies on a very small power generation system which converts a pressure difference in a gas into electrical power: a micro-turbo-generator. The design of the micro-turbo-generator involved combining two very different machines, a micro-generator and a micro-turbine, into a single device which could be fabricated within the constraints of current microelectronic processing techniques. Research into power generation on the micro-scale has begun to take place in the form of electromagnetic micro-motor design and fabrication. These variable reluctance machines can be transformed into power generation devices by implementing accurate rotor position sensing, high-speed current switching and a means for inducing rotor motion. This leads to the implementation of a switched reluctance generator, which is well-understood on the macro-scale but has not been attempted on the micro-scale. The most significant hurdle facing researchers is the task of coupling a prime mover, such as a micro-turbine, to the rotor of a power generation device efficiently and effectively while maintaining relative simplicity in the fabrication procedures. The design presented here offers a potential solution to this problem.

  2. Micro Cooling, Heating, and Power (Micro-CHP) and Bio-Fuel Center, Mississippi State University

    SciTech Connect (OSTI)

    Louay Chamra

    2008-09-26

    Initially, most micro-CHP systems will likely be designed as constant-power output or base-load systems. This implies that at some point the power requirement will not be met, or that the requirement will be exceeded. Realistically, both cases will occur within a 24-hour period. For example, in the United States, the base electrical load for the average home is approximately 2 kW while the peak electrical demand is slightly over 4 kW. If a 3 kWe micro- CHP system were installed in this situation, part of the time more energy will be provided than could be used and for a portion of the time more energy will be required than could be provided. Jalalzadeh-Azar [6] investigated this situation and presented a comparison of electrical- and thermal-load-following CHP systems. In his investigation he included in a parametric analysis addressing the influence of the subsystem efficiencies on the total primary energy consumption as well as an economic analysis of these systems. He found that an increase in the efficiencies of the on-site power generation and electrical equipment reduced the total monthly import of electricity. A methodology for calculating performance characteristics of different micro-CHP system components will be introduced in this article. Thermodynamic cycles are used to model each individual prime mover. The prime movers modeled in this article are a spark-ignition internal combustion engine (Otto cycle) and a diesel engine (Diesel cycle). Calculations for heat exchanger, absorption chiller, and boiler modeling are also presented. The individual component models are then linked together to calculate total system performance values. Performance characteristics that will be observed for each system include maximum fuel flow rate, total monthly fuel consumption, and system energy (electrical, thermal, and total) efficiencies. Also, whether or not both the required electrical and thermal loads can sufficiently be accounted for within the system specifications is observed. Case study data for various micro-CHP system configurations have been discussed and compared. Comparisons are made of the different prime mover/fuel combinations. Also, micro- CHP monthly energy cost results are compared for each system configuration to conventional monthly utility costs for equivalent monthly building power, heating, and cooling requirements.

  3. Drag reduction in coal log pipelines

    SciTech Connect (OSTI)

    Marrero, T.R.; Liu, H.

    1996-12-31

    It is well-known that solutions of dissolved long-chain macromolecules produce lower friction or drag losses than with the solvent alone. In coal log pipeline (CLP), water is the conveying medium. Synthetic polymers such as poly(ethylene oxide) have been dissolved in water and tested for their extent of drag reduction as a function of concentration and other variables. Lab-scale experimental results for CLP indicate substantial drag reduction at low concentration levels of polymer. But, the macromolecules exhibit degradation under mechanical shear stresses. The large molecules break into smaller units. This degradation effect causes a loss of drag reduction. However, high levels of drag reduction can be maintained as follows: (1) by injecting polymer into the CLP at several locations along the pipeline, (2) by injecting polymer of different particle sizes, (3) by using more robust types of polymers, or (4) by using polymer-fiber mixtures. This report presents the value of drag-reducing agents in terms of pumping power net cost savings. In addition, this report outlines the environmental impact of drag reduction polymers, and end-of-pipeline water treatment processes. For an operating CLP, hundreds of miles in length, the use of poly(ethylene oxide) as a drag reducing agent provides significant pumping power cost savings at a minimal materials cost.

  4. Saving big bucks with your log sheets

    SciTech Connect (OSTI)

    Puskar, J.R. [CEC Consultants, Inc., Cleveland, OH (United States)

    1999-07-01

    This article speaks to a common problem in a lot of industrial and institutional boilerhouses. Most boilerhouses do an excellent job at collecting information. Circular chart recorders churn out pressures, temperatures, and flows for everything from steam to natural gas to city water consumption. At most facilities, this stuff all gets chucked into a drawer or file cabinet daily. Have you ever wondered why you collect and record what you do? What were people thinking when the existing logs were set up? This article attempts to challenge the original thought process and hopes to evoke in the reader a renewed vision of what should be collected, how, and then what can be done with it. The goal of this article is not to define new and expensive data acquisition or control system projects. It is instead to show how to develop systems that only require paper, pencils, and people who are motivated and care. These people are probably already being paid to do most of this work. Experience is that if these people are treated with respect and given some simple tools they will do amazing things beyond what was thought possible. This is a low-tech humanistic approach that has a fabulous rate of return. It`s also something that can be immediately implemented.

  5. M.Sc. Thesis Forensic examination of log files

    E-Print Network [OSTI]

    to aid the investigation, so that the digital evidence can be extracted in a fast and e#cient manner of artificial neural networks to classify router logs, classification of each log entry, and development of Service, Flow Classification, Feature Extraction, Tra#c Aggregation. #12; #12; Contents 1 Introduction 1 1

  6. M.Sc. Thesis Forensic examination of log files

    E-Print Network [OSTI]

    to aid the investigation, so that the digital evidence can be extracted in a fast and efficient manner of artificial neural networks to classify router logs, classification of each log entry, and development of Service, Flow Classification, Feature Extraction, Traffic Aggregation. #12;#12;Contents 1 Introduction 1 1

  7. Efficient Discovery of Understandable Declarative Process Models from Event Logs

    E-Print Network [OSTI]

    van der Aalst, Wil

    Efficient Discovery of Understandable Declarative Process Models from Event Logs Fabrizio M. Maggi models are more suitable for less structured processes, most discovery techniques generate conventional) process discovery (learning a model from example traces in an event log), (b) confor- mance checking

  8. Mining Configurable Process Models from Collections of Event Logs

    E-Print Network [OSTI]

    van der Aalst, Wil

    towards the discovery of a configurable process model based on a collection of event logs. In this paper related work on process discovery, configurable process models and current model merging techniquesMining Configurable Process Models from Collections of Event Logs J.C.A.M. Buijs, B.F. van Dongen

  9. Preprocessing and Mining Web Log Data for Web Personalization

    E-Print Network [OSTI]

    Ruggieri, Salvatore

    Preprocessing and Mining Web Log Data for Web Personalization M. Baglioni1 , U. Ferrara2 , A. Romei/26, 56017 S. Martino Ulmiano (PI) Italy ferrara@ksolutions.it Abstract. We describe the web usage mining behaviour of a web site users. The models are inferred from the access logs of a web server by means of data

  10. Directed Planar Reachability Is in Unambiguous Log-Space

    E-Print Network [OSTI]

    Variyam, Vinodchandran N.

    4 Directed Planar Reachability Is in Unambiguous Log-Space CHRIS BOURKE, RAGHUNATH TEWARI, and N. V reachability, planar graphs, unambiguous log-space ACM Reference Format: Bourke, C., Tewari, R. Bourke, R. Tewari, and N. V. Vinodchandran, Department of Computer Science and Engineering, University

  11. Method of fabricating a micro machine

    DOE Patents [OSTI]

    Stalford, Harold L

    2014-11-11

    A micro machine may be in or less than the micrometer domain. The micro machine may include a micro actuator and a micro shaft coupled to the micro actuator. The micro shaft is operable to be driven by the micro actuator. A tool is coupled to the micro shaft and is operable to perform work in response to at least motion of the micro shaft.

  12. Micro heat barrier

    DOE Patents [OSTI]

    Marshall, Albert C.; Kravitz, Stanley H.; Tigges, Chris P.; Vawter, Gregory A.

    2003-08-12

    A highly effective, micron-scale micro heat barrier structure and process for manufacturing a micro heat barrier based on semiconductor and/or MEMS fabrication techniques. The micro heat barrier has an array of non-metallic, freestanding microsupports with a height less than 100 microns, attached to a substrate. An infrared reflective membrane (e.g., 1 micron gold) can be supported by the array of microsupports to provide radiation shielding. The micro heat barrier can be evacuated to eliminate gas phase heat conduction and convection. Semi-isotropic, reactive ion plasma etching can be used to create a microspike having a cusp-like shape with a sharp, pointed tip (<0.1 micron), to minimize the tip's contact area. A heat source can be placed directly on the microspikes. The micro heat barrier can have an apparent thermal conductivity in the range of 10.sup.-6 to 10.sup.-7 W/m-K. Multiple layers of reflective membranes can be used to increase thermal resistance.

  13. Planar micro-optic solar concentration

    E-Print Network [OSTI]

    Karp, Jason Harris

    2010-01-01

    Planar Micro-Optic Solar Collectors," Optics for Solarin planar micro-optic solar collectors,” Optics Express, (inin planar micro-optic solar collectors,” Optics Express (in

  14. Silicon micro-mold

    DOE Patents [OSTI]

    Morales, Alfredo M. (Livermore, CA)

    2006-10-24

    The present invention describes a method for rapidly fabricating a robust 3-dimensional silicon-mold for use in preparing complex metal micro-components. The process begins by depositing a conductive metal layer onto one surface of a silicon wafer. A thin photoresist and a standard lithographic mask are then used to transfer a trace image pattern onto the opposite surface of the wafer by exposing and developing the resist. The exposed portion of the silicon substrate is anisotropically etched through the wafer thickness down to conductive metal layer to provide an etched pattern consisting of a series of rectilinear channels and recesses in the silicon which serve as the silicon micro-mold. Microcomponents are prepared with this mold by first filling the mold channels and recesses with a metal deposit, typically by electroplating, and then removing the silicon micro-mold by chemical etching.

  15. Micro-machined resonator

    DOE Patents [OSTI]

    Godshall, N.A.; Koehler, D.R.; Liang, A.Y.; Smith, B.K.

    1993-03-30

    A micro-machined resonator, typically quartz, with upper and lower micro-machinable support members, or covers, having etched wells which may be lined with conductive electrode material, between the support members is a quartz resonator having an energy trapping quartz mesa capacitively coupled to the electrode through a diaphragm; the quartz resonator is supported by either micro-machined cantilever springs or by thin layers extending over the surfaces of the support. If the diaphragm is rigid, clock applications are available, and if the diaphragm is resilient, then transducer applications can be achieved. Either the thin support layers or the conductive electrode material can be integral with the diaphragm. In any event, the covers are bonded to form a hermetic seal and the interior volume may be filled with a gas or may be evacuated. In addition, one or both of the covers may include oscillator and interface circuitry for the resonator.

  16. Active frequency tuning for micro resonators by localized thermal stressing effects$

    E-Print Network [OSTI]

    Lin, Liwei

    Active frequency tuning for micro resonators by localized thermal stressing effects$ Todd Remtema1 are established to characterize the electrical, thermal and frequency responses of active frequency tuning, Berkeley, CA 94720-1740, USA Abstract A method of active frequency tuning on comb-shape micro resonators

  17. An Economical Micro-Car Testbed for Validation of Cooperative Control Strategies

    E-Print Network [OSTI]

    Bertozzi, Andrea L.

    - controlled cars. The Position Tracking System includes a 1Dept. of Electrical Engineering, UniversityAn Economical Micro-Car Testbed for Validation of Cooperative Control Strategies Chung H. Hsieh1-- This paper describes the design of an economical cooperative control testbed using 1/64 size micro-car

  18. Micro-Windmills: The future of sustainable mobile energy? Christopher M Dugan / 4 days ago

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    -alloy-base, these micro-electrical-mechanical-system (MEMS) devices and the aerodynamic design of these micro-turbines As William Pentland of Forbes.com explains, in the world of wind power and windmills, bigger has been equated. In the 1980s through 1990s when wind power started its ascent to the mainstream consciousness, the rotating

  19. MICRO-CHP System for Residential Applications

    SciTech Connect (OSTI)

    Joseph Gerstmann

    2009-01-31

    This is the final report of progress under Phase I of a project to develop and commercialize a micro-CHP system for residential applications that provides electrical power, heating, and cooling for the home. This is the first phase of a three-phase effort in which the residential micro-CHP system will be designed (Phase I), developed and tested in the laboratory (Phase II); and further developed and field tested (Phase III). The project team consists of Advanced Mechanical Technology, Inc. (AMTI), responsible for system design and integration; Marathon Engine Systems, Inc. (MES), responsible for design of the engine-generator subsystem; AO Smith, responsible for design of the thermal storage and water heating subsystems; Trane, a business of American Standard Companies, responsible for design of the HVAC subsystem; and AirXchange, Inc., responsible for design of the mechanical ventilation and dehumidification subsystem.

  20. Micro Contacts and Micro Manipulation with MEMS Actuator Arrays

    E-Print Network [OSTI]

    Richardson, David

    Micro Contacts and Micro Manipulation with MEMS Actuator Arrays Karl­Friedrich B¨ohringer Bruce technology for MEMS (micro electro mechanical systems) increase the availability and diversity out tasks using coordinated systems of MEMS units motivates the development of automated, algorithmic

  1. Calibration of NMR well logs from carbonate reservoirs with laboratory NMR measurements and ?XRCT

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Mason, Harris E.; Smith, Megan M.; Hao, Yue; Carroll, Susan A.

    2014-12-31

    The use of nuclear magnetic resonance (NMR) well log data has the potential to provide in-situ porosity, pore size distributions, and permeability of target carbonate CO? storage reservoirs. However, these methods which have been successfully applied to sandstones have yet to be completely validated for carbonate reservoirs. Here, we have taken an approach to validate NMR measurements of carbonate rock cores with independent measurements of permeability and pore surface area to volume (S/V) distributions using differential pressure measurements and micro X-ray computed tomography (?XRCT) imaging methods, respectively. We observe that using standard methods for determining permeability from NMR data incorrectlymore »predicts these values by orders of magnitude. However, we do observe promise that NMR measurements provide reasonable estimates of pore S/V distributions, and with further independent measurements of the carbonate rock properties that universally applicable relationships between NMR measured properties may be developed for in-situ well logging applications of carbonate reservoirs.« less

  2. Geothermal well log interpretation state of the art. Final report

    SciTech Connect (OSTI)

    Sanyal, S.K.; Wells, L.E.; Bickham, R.E.

    1980-01-01

    An in-depth study of the state of the art in Geothermal Well Log Interpretation has been made encompassing case histories, technical papers, computerized literature searches, and actual processing of geothermal wells from New Mexico, Idaho, and California. A classification scheme of geothermal reservoir types was defined which distinguishes fluid phase and temperature, lithology, geologic province, pore geometry, salinity, and fluid chemistry. Major deficiencies of Geothermal Well Log Interpretation are defined and discussed with recommendations of possible solutions or research for solutions. The Geothermal Well Log Interpretation study and report has concentrated primarily on Western US reservoirs. Geopressured geothermal reservoirs are not considered.

  3. Breakthrough: micro-electronic photovoltaics

    ScienceCinema (OSTI)

    Okandan, Murat; Gupta, Vipin

    2014-06-23

    Sandia developed tiny glitter-sized photovoltaic (PV) cells that could revolutionize solar energy collection. The crystalline silicon micro-PV cells will be cheaper and have greater efficiencies than current PV collectors. Micro-PV cells require relatively little material to form well-controlled, highly efficient devices. Cell fabrication uses common microelectric and micro-electromechanical systems (MEMS) techniques.

  4. Breakthrough: micro-electronic photovoltaics

    SciTech Connect (OSTI)

    Okandan, Murat; Gupta, Vipin

    2012-04-23

    Sandia developed tiny glitter-sized photovoltaic (PV) cells that could revolutionize solar energy collection. The crystalline silicon micro-PV cells will be cheaper and have greater efficiencies than current PV collectors. Micro-PV cells require relatively little material to form well-controlled, highly efficient devices. Cell fabrication uses common microelectric and micro-electromechanical systems (MEMS) techniques.

  5. Highly Memory-Efficient LogLog Hash for Deep Packet Inspection

    E-Print Network [OSTI]

    Chao, Jonathan

    , and H. Jonathan Chao Department of Electrical and Computer Engineering Polytechnic Institute of NYU widely used in Network Intrusion Detection and Prevention Systems (NIDPSs) to detect mali- cious code

  6. Methods and systems for micro transmissions

    DOE Patents [OSTI]

    Stalford, Harold L

    2014-12-23

    Methods and systems for micro transmissions for a micro machine may comprise an input shaft assembly coupled to a micro actuator, an output shaft assembly coupled to a micro shaft, and one or more power conversion elements operable to convert a first type of movement from the micro actuator into a second, disparate type of movement for the micro shaft.

  7. Methods and systems for micro bearings

    DOE Patents [OSTI]

    Stalford, Harold L.

    2012-10-09

    A micro drive assembly may comprise a substrate, a micro shall oriented in-plane with the substrate and at least one micro bearing to support rotation of the micro shaft. The micro shaft and micro bearing may be in or less than the micrometer domain.

  8. Partnership Logging Accidents Cornelis de Hoop, LA Forest Products Lab

    E-Print Network [OSTI]

    , · Sonny Mills, LA Dept. of Labor · Greg Honaker, OSHA #12;OSHA -- LA Logging Council Strategic Partnership startup procedures. · Safe maintenance & repair procedures. · Safe work flow. · Minimize risk to fellers

  9. JOBAID-LOGGING IN TO THE OLC LEARNING SYSTEM

    Broader source: Energy.gov [DOE]

    In this job aid you will Log In to the system, Retrieve Forgotten Password and/or User ID, and Use the LMS Help System built into the application.

  10. Efficiently log and perforate 60 + wells with coiled tubing

    SciTech Connect (OSTI)

    Fertl, W.H.; Hotz, R.F.

    1987-07-01

    In today's petroleum industry, more and more emphasis is being placed on logging and completion techniques for highly deviated (extended-reach) and horizontal boreholes. This is the result of cost-effective development of oil and gas via: a minimum number of production platforms on large structures, incremental but marginal reserves in outlying and/or small fault blocks, shallow reservoirs in deep offshore waters, and significant hydrocarbon accumulations in environmentally sensitive and/or restrictive areas, e.g., perma-frost, urban areas, etc. The major challenge in logging such high-angle, extended-reach, and also horizontal boreholes is guiding the logging tool string to the bottom of the wellbore. In the horizontal portion of a borehole, the use of coiled tubing has proven successful in ''pushing'' the logging instrumentation toward the bottom (end) of the borehole.

  11. Log-domain circuit models of chemical reactions

    E-Print Network [OSTI]

    Mandal, Soumyajit

    We exploit the detailed similarities between electronics and chemistry to develop efficient, scalable bipolar or subthreshold log-domain circuits that are dynamically equivalent to networks of chemical reactions. Our ...

  12. Symposium on high-temperature well-logging instrumentation

    SciTech Connect (OSTI)

    Dennis, B.R. (comp.)

    1986-06-01

    The symposium contains papers about developments in borehole logging instrumentation that can withstand downhole temperatures in excess of 300/sup 0/C and pressures greater than 103 MPa. Separate abstracts have been prepared for individual papers. (ACR)

  13. Higher Order Modes in Acoustic Logging While Drilling

    E-Print Network [OSTI]

    Chi, Shihong

    2005-01-01

    In multipole acoustic logging while drilling (LWD), the fundamental modes dominate recorded waveforms. Higher order modes may also appear and complicate the processing of LWD data. In dipole LWD measurements, the dipole ...

  14. Fluid-Rock Characterization and Interactions in NMR Well Logging

    SciTech Connect (OSTI)

    Hirasaki, George J.; Mohanty, Kishore K.

    2003-02-10

    The objective of this project was to characterize the fluid properties and fluid-rock interactions that are needed for formation evaluation by NMR well logging. The advances made in the understanding of NMR fluid properties are summarized in a chapter written for an AAPG book on NMR well logging. This includes live oils, viscous oils, natural gas mixtures, and the relation between relaxation time and diffusivity.

  15. Fluid-Rock Characterization and Interactions in NMR Well Logging

    SciTech Connect (OSTI)

    Hirasaki, George J.; Mohanty, Kishore K.

    2003-02-10

    The objective of this project was to characterize the fluid properties and fluid-rock interactions which are needed for formation evaluation by NMR well logging. NMR well logging is finding wide use in formation evaluation. The formation parameters commonly estimated were porosity, permeability, and capillary bound water. Special cases include estimation of oil viscosity, residual oil saturation, location of oil/water contact, and interpretation on whether the hydrocarbon is oil or gas.

  16. Initial results from an acoustic logging-while-drilling tool

    SciTech Connect (OSTI)

    Minear, J.W.; Heysse, D.R.; Boonen, P.M.

    1996-12-31

    This paper presents the initial results from field tests of an acoustic logging-while-drilling tool. Over 60,000 ft of well have been logged with 6.75-in.- and 8-in.-diameter versions of the tool. Various types of formations were encountered with compressional slowness values ranging from 55 {mu}sec/ft to 170 {mu}sec/ft. The tool is configured as a borehole-compensated device; transmitters are located on opposite sides of an array of four receivers. An ultrasonic standoff transducer provides a tool-to-borehole wall distance measurement for data quality evaluation and processing. Slowness values are computed downhole using real-time waveform processing. Full-waveform data are stored for retrieval and re-processing at the surface. Interactive processing software allows an engineer to reprocess log intervals of poorer log quality and improve the slowness log computed downhole. Downhole-processed and post-drilling-processed slowness logs are compared, and generally show close agreement. These logs also agree well with wireline slowness logs. Rugose boreholes and attenuating formations can reduce waveform quality. A new rapid-fire technique acquires multiple estimates of slowness as the drillstring rotates through only a fraction of a revolution, and improves slowness quality in rugose boreholes. Shear-wave energy is clearly apparent in most waveform data. Waveforms can be processed to yield both shear and compressional slowness values. These can then be used to estimate porosity, compute elastic moduli of the rock (for example, Poisson`s ratio, Young`s modulus, bulk compressibility, and shear modulus), and to compute synthetic seismograms for correlation with seismic profiles. Some of these applications of compressional and shear slowness data are discussed with examples.

  17. Scanning micro-sclerometer

    DOE Patents [OSTI]

    Oliver, W.C.; Blau, P.J.

    1994-11-01

    A scanning micro-sclerometer measures changes in contact stiffness and correlates these changes to characteristics of a scratch. A known force is applied to a contact junction between two bodies and a technique employing an oscillating force is used to generate the contact stiffness between the two bodies. As the two bodies slide relative to each other, the contact stiffness changes. The change is measured to characterize the scratch. 2 figs.

  18. Advanced Micro Turbine System (AMTS) -C200 Micro Turbine -Ultra-Low Emissions Micro Turbine

    SciTech Connect (OSTI)

    Capstone Turbine Corporation

    2007-12-31

    In September 2000 Capstone Turbine Corporation commenced work on a US Department of Energy contract to develop and improve advanced microturbines for power generation with high electrical efficiency and reduced pollutants. The Advanced MicroTurbine System (AMTS) program focused on: (1) The development and implementation of technology for a 200 kWe scale high efficiency microturbine system (2) The development and implementation of a 65 kWe microturbine which meets California Air Resources Board (CARB) emissions standards effective in 2007. Both of these objectives were achieved in the course of the AMTS program. At its conclusion prototype C200 Microturbines had been designed, assembled and successfully completed field demonstration. C65 Microturbines operating on natural, digester and landfill gas were also developed and successfully tested to demonstrate compliance with CARB 2007 Fossil Fuel Emissions Standards for NOx, CO and VOC emissions. The C65 Microturbine subsequently received approval from CARB under Executive Order DG-018 and was approved for sale in California. The United Technologies Research Center worked in parallel to successfully execute a RD&D program to demonstrate the viability of a low emissions AMS which integrated a high-performing microturbine with Organic Rankine Cycle systems. These results are documented in AMS Final Report DOE/CH/11060-1 dated March 26, 2007.

  19. Logging with coiled tubing less effective than with drill pipe

    SciTech Connect (OSTI)

    Van Den Bosch, R. )

    1994-01-31

    Coiled tubing offered neither economic nor operational advantages over drill pipe for conveying logging tools in open hole shallow horizontal wells in Germany. In the past 2 years, Mobil Erdgas-Erdoel GMbH (MEEG) participated in completing eight shallow horizontal wells. These were medium-to-short radius wells at measured depths of between 850 and 2,000 m. The average horizontal section was 350 m. The logging tools were conveyed by coiled tubing or drill pipe. MEEG attempted to log five wells with coiled tubing-conveyed tools, four with 1 1/2-in. tubing. Total depth was reached reliably in only one well, the shallowest and with the shortest horizontal section. Simulation programs were unreliable for calculating the downhole forces of the coil/tool combination or predicting possible helical lockups. In wells with drill pipe-conveyed logs, the tool combination could always be pushed to total depth, and the operations were generally faster and cost less than logging with coiled tubing. Also, drill pipe allowed longer and heavier tool strings. For reliable operations, coiled tubing needs to be more rigid, rig-up/rig-down times need to be improved, and the simulation programs must be more reliable for predicting downhole lock-up.

  20. Technical evaluation of software for gamma-ray logging system

    SciTech Connect (OSTI)

    Stromswold, D.C.

    1994-05-01

    This report contains results of a technical review of software, identified as LGCALC, that processes data collected by a high-resolution gamma-ray borehole logging system. The software presently operates within Westinghouse Hanford Company, Department of Geosciences, to process data collected by the Radionuclide Logging System. The software has been reviewed for its suitability for processing data to be collected by new high-resolution gamma-ray logging trucks scheduled to begin operational tests within Westinghouse Tank Waste Remediation Systems during 1994. Examination of the program code and hands-on operational tests have shown that this software is suitable for its intended use of processing high-resolution gamma-ray data obtained from borehole logging. Most of the code requires no changes, but in a few limited cases, suggestions have been made to correct errors or improve operation. Section 4 describes these changes. The technical review has confirmed the appropriateness, correctness, completeness, and coding accuracy of algorithms used to process spectral gamma-ray data, leading to a calculation of subsurface radionuclide contaminants. Running the program with test data from calibration models has confirmed that the program operates correctly. Comparisons with hand calculations have shown the correctness of the output from the program, based on known input data. Section 3 describes these tests. The recommended action is to make the near term programming changes suggested in Section 4.1 and then use the LGCALC analysis program with the new high-resolution logging systems once they have been properly calibrated.

  1. User's manual for geophysical well-logging software programs

    SciTech Connect (OSTI)

    Petrie, G.M.; Gibson, D.; Blair, S.C.

    1983-02-01

    Since 1958 the Ground-Water Surveillance Program for the Hanford Site has made geophysical logging measurements in most of the 800 wells and deep boreholes that have been drilled on the Hanford Site. In 1980 the Pacific Northwest Laboratory (PNL), which conducts the Ground-Water Surveillance Program, began forming a computerized data base for storing and retrieving geophysical well log data and developing software for quantitative analysis of the well log data. This report, designed to serve as a user's guide, documents the data base system that handles the well log data. Two programs, DIGLOG1 and LOGIT, are used to manipulate the data. The program DIGLOG1 translates analog paper strip charts into digital format; the program LOGIT is a general utility program that edits, displays, checks, stores, writes, and deletes sets of well log data. These two programs do not provide sophisticated display and analytical capabilities; rather, they provide programs that give the user easy access to powerful standard analytical software.

  2. Micro-fluidic interconnect

    DOE Patents [OSTI]

    Okandan, Murat (Albuquerque, NM); Galambos, Paul C. (Albuquerque, NM); Benavides, Gilbert L. (Los Ranchos, NM); Hetherington, Dale L. (Albuquerque, NM)

    2006-02-28

    An apparatus for simultaneously aligning and interconnecting microfluidic ports is presented. Such interconnections are required to utilize microfluidic devices fabricated in Micro-Electromechanical-Systems (MEMS) technologies, that have multiple fluidic access ports (e.g. 100 micron diameter) within a small footprint, (e.g. 3 mm.times.6 mm). Fanout of the small ports of a microfluidic device to a larger diameter (e.g. 500 microns) facilitates packaging and interconnection of the microfluidic device to printed wiring boards, electronics packages, fluidic manifolds etc.

  3. MicroBooNE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines light on dark matterEnergyPublicatons ContactThousandEnergyMicroBooNE

  4. Micro rotary machine and methods for using same

    DOE Patents [OSTI]

    Stalford, Harold L. (Norman, OK)

    2012-04-17

    A micro rotary machine may include a micro actuator and a micro shaft coupled to the micro actuator. The micro shaft comprises a horizontal shaft and is operable to be rotated by the micro actuator. A micro tool is coupled to the micro shaft and is operable to perform work in response to motion of the micro shaft.

  5. Electricity Reliability

    E-Print Network [OSTI]

    Post, Wilfred M.

    Electricity Delivery and Energy Reliability High Temperature Superconductivity (HTS) Visualization in the future because they have virtually no resistance to electric current, offering the possibility of new electric power equipment with more energy efficiency and higher capacity than today's systems

  6. Annual Logging Symposium, June 3-6, 2007 RAPID SIMULATION OF BOREHOLE NUCLEAR MEASUREMENTS

    E-Print Network [OSTI]

    Torres-Verdín, Carlos

    with other well logs. The particular case of logging while drilling (LWD) logs in high-angle wells of Petrophysicists and Well Log Analysts (SPWLA) and the submitting authors. This paper was prepared for presentation techniques as well as for their quantitative integration with other borehole measurements

  7. VerSum: Verifiable Computations over Large Public Logs Jelle van den Hooff

    E-Print Network [OSTI]

    blockchains, or a Certificate Transparency log. VERSUM clients ensure that the output is correct by comparing publicly available logs, whose validity is guaranteed. The logs are large (e.g., the Bitcoin blockchain is added to the Bitcoin blockchain). To run computations over these logs requires a Permission to make

  8. The normalization of meshes and nodes in electrical networks 

    E-Print Network [OSTI]

    Johnson, Allen Forrest

    1951-01-01

    , electric logs, drill stem tests, dip logs, and seismic records. Five granite wash fields have been discovered adjacent to the Bravo Dome in Oldham County, Texas; the Lambert 'I, Hryhor, Sundance, Pond, and Brandi. The section at Lambert 1, Hryhor... reservoirs in the Texas Panhandle. This thesis fol'iows the style and format of the American Association of Petroleum Geolo fsts Bulletin. Regional Structure The major positive structural features of the Texas Panhandle consist of the Amarillo Uplift...

  9. Well-log interpretation of carbonate reservoirs with bimodal porosity 

    E-Print Network [OSTI]

    Tandircioglu, Ahmet

    1990-01-01

    ) in the flushed zone. The difference between the two was an INDUCTION RESISTIVITY SP-R-2 5 MV 9750 GAS EFFECT 4t W Run I SONIC g SW 26 58% 22 65% st Run 2 Figure 4-%ell-log responses from a Frio sandstone with bimodal porosity, Nueces County, Texas... ~ ~ ~ ' ~ ~ 23 Ol LIPF 5 OAMM* RAY SHIRE' IA POROSITY 55 15 OAL O 0 PORE ~ PERF Figure 9-Gamma-ray (GR), caliper(CAL), density porosity (gD), and neutron porosity (9N) logs through the Smackover in the Shirey 1A well, Claiborne Parish, Louisiana...

  10. Correlation of log response to production in the Austin Chalk 

    E-Print Network [OSTI]

    Behseresht, Cyrus Douglas

    1992-01-01

    of this study is to determine to what degree the response of resistivity well-logs reflects the productivity of individual wells in the Austin Chalk. An area in south-central Burleson County was chosen for the study. Logs were available from 38 wells... for the Proco Gise data, Ro at 4% is 3. 59 ohm-m (figure 12). Thus, the Proco Gise ?1 data supports an Ro of approximately 3. 58 at 4% porosity in the Austin Chalk. This test of the empirical relationship between Rt and water saturation in the Chalk does...

  11. Miniatuization of the flowing fluid electric conductivity loggingtec hnique

    SciTech Connect (OSTI)

    Su, Grace W.; Quinn, Nigel W.T.; Cook, Paul J.; Shipp, William

    2005-10-19

    An understanding of both the hydraulic properties of the aquifer and the depth distribution of salts is critical for evaluating the potential of groundwater for conjunctive water use and for maintaining suitable groundwater quality in agricultural regions where groundwater is used extensively for irrigation and drinking water. The electrical conductivity profiles recorded in a well using the flowing fluid electric conductivity logging (FEC logging) method can be analyzed to estimate interval specific hydraulic conductivity and estimates of the salinity concentration with depth. However, irrigation wells that are common in agricultural regions have limited access into them because these wells are still in operation, and the traditional equipment used for FEC logging cannot fit through the small access pipe intersecting the well. A modified, miniaturized FEC logging technique was developed such that this logging method could be used in wells with limited access. In addition, a new method for injecting water over the entire screened interval of the well was developed to reduce the time required to perform FEC logging. Results of FEC logging using the new methodology and miniaturized system in two irrigation wells are also summarized.

  12. A comparison of ground source heat pumps and micro-combined heat and power as residential greenhouse gas reduction strategies

    E-Print Network [OSTI]

    Guyer, Brittany (Brittany Leigh)

    2009-01-01

    Both ground source heat pumps operating on electricity and micro-combined heat and power systems operating on fossil fuels offer potential for the reduction of green house gas emissions in comparison to the conventional ...

  13. Quantifying the Effect of Kerogen on Electrical Resistivity Measurements on Organic-rich Source Rocks 

    E-Print Network [OSTI]

    Kethireddy, Nikhil Reddy

    2013-12-04

    Interpretation of electrical resistivity logs in organic-rich source rocks has been challenging for petrophysicists. Conventional resistivity-porosity-saturation models (e.g., Archie’s, Dual-Water, and Waxman-Smits equations) ...

  14. Richmond Electric Vehicle Initiative Electric Vehicle Readiness...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Richmond Electric Vehicle Initiative Electric Vehicle Readiness Plan Richmond Electric Vehicle Initiative Electric Vehicle Readiness Plan The REVi plan addresses the electric...

  15. Micro-channel plate detector

    SciTech Connect (OSTI)

    Elam, Jeffrey W.; Lee, Seon W.; Wang, Hsien -Hau; Pellin, Michael J.; Byrum, Karen; Frisch, Henry J.

    2015-09-22

    A method and system for providing a micro-channel plate detector. An anodized aluminum oxide membrane is provided and includes a plurality of nanopores which have an Al coating and a thin layer of an emissive oxide material responsive to incident radiation, thereby providing a plurality of radiation sensitive channels for the micro-channel plate detector.

  16. Micro thrust and heat generator

    DOE Patents [OSTI]

    Garcia, E.J.

    1998-11-17

    A micro thrust and heat generator have a means for providing a combustion fuel source to an ignition chamber of the micro thrust and heat generator. The fuel is ignited by a ignition means within the micro thrust and heat generator`s ignition chamber where it burns and creates a pressure. A nozzle formed from the combustion chamber extends outward from the combustion chamber and tappers down to a narrow diameter and then opens into a wider diameter where the nozzle then terminates outside of said combustion chamber. The pressure created within the combustion chamber accelerates as it leaves the chamber through the nozzle resulting in pressure and heat escaping from the nozzle to the atmosphere outside the micro thrust and heat generator. The micro thrust and heat generator can be microfabricated from a variety of materials, e.g., of polysilicon, on one wafer using surface micromachining batch fabrication techniques or high aspect ratio micromachining techniques (LIGA). 30 figs.

  17. Electrical + Engineering

    E-Print Network [OSTI]

    Cafarella, Michael J.

    Electrical + Computer Engineering Electrical + Computer Engineering 2013 PROFILE PEOPLE Faculty Students Electrical Engineering - 330 Computer Engineering - 224 Graduate Students EE and EE:Systems MSE - 301 EE and EE:Systems PhD - 296 Degrees Awarded Electrical Engineering BSE - 123 Computer Engineering

  18. Illegal Logging and Illegal Activites in the Forestry Sector

    E-Print Network [OSTI]

    illegal activities in the forestry sector Definition of illegal logging : · "Timber harvesting harvesting procedure itself may be illegal, including corrupt means to gain access to forests(....)." (Fern, riverbanks and water catchments · Removing under/oversized trees from public forests · Extracting more timber

  19. Subsistence Halibut Community Harvest Log Page 1 of 4

    E-Print Network [OSTI]

    -0512, Expiration date: 08/31/2017 Subsistence Halibut Community Harvest Permit (CHP) Log U.S. Dept of Commerce-1668 Telephone: 1-800-304-4846 FAX: 907-586-7354 BLOCK A ­ CHP COORDINATOR 1. Name of CHP Coordinator 2. Signature of CHP Coordinator BLOCK B -- SUBSISTENCE FISHER IDENTIFICATION 1. Name of Fisher (First, Middle

  20. SPE-163690-MS Synthetic, Geomechanical Logs for Marcellus Shale

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    SPE-163690-MS Synthetic, Geomechanical Logs for Marcellus Shale M. O. Eshkalak, SPE, S. D of hydrocarbons from the reservoirs, notably shale, is attributed to realizing the key fundamentals of reservoir and mineralogy is crucial in order to identify the "right" pay-zone intervals for shale gas production. Also

  1. 17. Integrating Engineered Log JamTechnology into River Rehabilitation

    E-Print Network [OSTI]

    Montgomery, David R.

    17. Integrating Engineered Log JamTechnology into River Rehabilitation Tim Abbe, George Pess, David R. Montgomery, and Kevin L. Fetherston ABSTRACT Reach-scale river rehabilitation projects using and engineering practices. The ELJ demonstration projects were developed as part of river rehabilitation efforts

  2. Fluid-Rock Characterization and Interactions in NMR Well Logging

    SciTech Connect (OSTI)

    George J. Hirasaki; Kishore K. Mohanty

    2005-09-05

    The objective of this report is to characterize the fluid properties and fluid-rock interactions that are needed for formation evaluation by NMR well logging. The advances made in the understanding of NMR fluid properties are summarized in a chapter written for an AAPG book on NMR well logging. This includes live oils, viscous oils, natural gas mixtures, and the relation between relaxation time and diffusivity. Oil based drilling fluids can have an adverse effect on NMR well logging if it alters the wettability of the formation. The effect of various surfactants on wettability and surface relaxivity are evaluated for silica sand. The relation between the relaxation time and diffusivity distinguishes the response of brine, oil, and gas in a NMR well log. A new NMR pulse sequence in the presence of a field gradient and a new inversion technique enables the T{sub 2} and diffusivity distributions to be displayed as a two-dimensional map. The objectives of pore morphology and rock characterization are to identify vug connectivity by using X-ray CT scan, and to improve NMR permeability correlation. Improved estimation of permeability from NMR response is possible by using estimated tortuosity as a parameter to interpolate between two existing permeability models.

  3. Logging threatens Indonesia's biodiversity By Dianthus Saputra Estey in Jakarta

    E-Print Network [OSTI]

    Logging threatens Indonesia's biodiversity By Dianthus Saputra Estey in Jakarta Monday 13 October 2003, 16:57 Makka Time, 13:57 GMT A tenth of the world's tropical rainforests lie in Indonesia year," Togu Manurung from Forest Watch Indonesia said. This ranks the depletion of Indonesia

  4. Feedback Control Theory and Processing System Log Streams Research Project

    E-Print Network [OSTI]

    Tang, Pingzhong

    Feedback Control Theory and Processing System Log Streams by Wei Xu Research Project Submitted, and on exploring general techniques of applying feedback control theory to distributed computer systems. We have. All problems addressed are solved systematically with feedback-control-theory. We discuss three uses

  5. Lightweight Logging for Lazy Release Consistent Distributed Shared Memory

    E-Print Network [OSTI]

    Neves, Nuno

    Lightweight Logging for Lazy Release Consistent Distributed Shared Memory Manuel Costa, Paulo Guedes, Manuel Sequeira, Nuno Neves, Miguel Castro IST - INESC R. Alves Redol 9, 1000 Lisboa PORTUGAL algorithm for a DSM system based on lazy release Manuel Costa, Nuno Neves and Miguel Castro were supported

  6. Chemical micro-sensor

    DOE Patents [OSTI]

    Ruggiero, Anthony J.

    2005-05-03

    An integrated optical capillary electrophoresis system for analyzing an analyte. A modulated optical pump beam impinges on an capillary containing the analyte/buffer solution which is separated by electrophoresis. The thermally-induced change in the index of refraction of light in said electrophoresis capillary is monitored using an integrated micro-interferometer. The interferometer includes a first interferometer arm intersecting the electrophoresis capillary proximate the excitation beam and a second, reference interferometer arm. Changes in index of refraction in the analyte measured by interrogating the interferometer state using white light interferometry and a phase-generated carrier demodulation technique. Background thermo-optical activity in the buffer solution is cancelled by splitting the pump beam and exciting pure buffer solution in a second section of capillary where it crosses the reference arm of the interferometer.

  7. Automated micro-tracking planar solar concentrators

    E-Print Network [OSTI]

    Hallas, Justin Matthew

    2011-01-01

    planar micro-optic solar collectors," Opt. Express 19, A673-planar micro-optic solar collectors," Opt. Express 19, A673-

  8. Annual Logging Symposium, June 26-29, 2005 JOINT STOCHASTIC INVERSION OF PETROPHYSICAL LOGS AND 3D

    E-Print Network [OSTI]

    Torres-Verdín, Carlos

    : APPLICATION TO A GULF- OF-MEXICO DEEPWATER HYDROCARBON RESERVOIR A. Contreras and C. Torres seismic data acquired in the deepwater Gulf of Mexico. Reservoir units consist of stacked turbidite sands and fluid saturation. Both petrophysical logs and elastic-petrophysical correlation cross-plots, together

  9. Fabrication process development for micro heat pipes using orientation dependent etching 

    E-Print Network [OSTI]

    Ahmed, Akther Salehuddin

    1991-01-01

    FABRICATION PROCESS DEVELOPMENT FOR MICRO HEAT PIPES USING ORIENTATION DEPENDENT ETCHING A Thesis by AKTHER SALEHUDDIN AHMED Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE December 1991 Major Subject: Electrical Engineering FABRICATION PROCESS DEVELOPMENT FOR MICRO HEAT PIPES USING ORIENTATION DEPENDENT ETCHING A Thesis by AKTHER SALEHUDDIN AHMED Approved as style and content by: Mark H...

  10. Flowing fluid electric conductivity logging for a deep artesian well in fractured rock with regional flow

    E-Print Network [OSTI]

    Doughty, C.

    2013-01-01

    07-94, Swedish Nuclear Fuel and Waste Management Co. (SKB),4.1), Swedish Nuclear Fuel and Waste Management Co. (SKB),94- 74, Swedish Nuclear Fuel and Waste Management Co. (SKB),

  11. Flowing fluid electric conductivity logging for a deep artesian well in fractured rock with regional flow

    E-Print Network [OSTI]

    Doughty, C.

    2013-01-01

    and hydraulic head could be uniquely determined as well (with lower hydraulic head. Next, the well is shut in (i.e. ,hydraulic head values obtained from packer tests in the same well.

  12. COMPARISON OF ACOUSTIC AND ELECTRICAL IMAGE LOGS FROM THE COSO GEOTHERMAL

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButte County, California: Energy Resources JumpEmissionCapitalCMEA

  13. Development of Electrochemical Micro Machining 

    E-Print Network [OSTI]

    Srinivas Sundarram, Sriharsha

    2008-10-10

    The machining of materials on micrometer and sub-micrometer scale is considered the technology of the future. The current techniques for micro manufacturing mostly are silicon based. These manufacturing techniques are ...

  14. Knowledge-based stratigraphic well-log correlation 

    E-Print Network [OSTI]

    Denton, Michael A.

    1990-01-01

    correlated higher ranking strata. Thus, higher ranking correlations provide heuristics for lower ranking correlations. The system represents strata by symbols from a set of standard symbols which include peaks, troughs, and steps. Symbols replace events.... The zone attributes abstracted from the well-log include the following: interval, lithology ? classified as shale or non-shale, zone position, general zone shape, thickness, average amplitude, zone above name, and zone below name. Thus, the expert system...

  15. Gamma-Ray Logging Workshop (February 1981) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,Executive Compensation References: FARWashers |Gamma-Ray Logging Workshop

  16. Thermal Conductivity from Core and Well log Data

    E-Print Network [OSTI]

    Hartmann, Andreas; Clauser, Christoph

    2008-01-01

    The relationships between thermal conductivity and other petrophysical properties have been analysed for a borehole drilled in a Tertiary Flysch sequence. We establish equations that permit us to predict rock thermal conductivity from logging data. A regression analysis of thermal conductivity, bulk density, and sonic velocity yields thermal conductivity with an average accuracy of better than 0.2 W/(m K). As a second step, logging data is used to compute a lithological depth profile, which in turn is used to calculate a thermal conductivity profile. From a comparison of the conductivity-depth profile and the laboratory data it can be concluded that thermal conductivity can be computed with an accuracy of less than 0.3 W/(m K)from conventional wireline data. The comparison of two different models shows that this approach can be practical even if old and incomplete logging data is used. The results can be used to infer thermal conductivity for boreholes without appropriate core data that are drilled in a simil...

  17. Micro fuel cell

    SciTech Connect (OSTI)

    Zook, L.A.; Vanderborgh, N.E. [Los Alamos National Lab., NM (United States); Hockaday, R. [Energy Related Devices Inc., Los Alamos, NM (United States)

    1998-12-31

    An ambient temperature, liquid feed, direct methanol fuel cell device is under development. A metal barrier layer was used to block methanol crossover from the anode to the cathode side while still allowing for the transport of protons from the anode to the cathode. A direct methanol fuel cell (DMFC) is an electrochemical engine that converts chemical energy into clean electrical power by the direct oxidation of methanol at the fuel cell anode. This direct use of a liquid fuel eliminates the need for a reformer to convert the fuel to hydrogen before it is fed into the fuel cell.

  18. Micro environmental sensing device

    DOE Patents [OSTI]

    Polosky, Marc A. (Tijeras, NM); Lukens, Laurance L. (Tijeras, NM)

    2006-05-02

    A microelectromechanical (MEM) acceleration switch is disclosed which includes a proof mass flexibly connected to a substrate, with the proof mass being moveable in a direction substantially perpendicular to the substrate in response to a sensed acceleration. An electrode on the proof mass contacts one or more electrodes located below the proof mass to provide a switch closure in response to the sensed acceleration. Electrical latching of the switch in the closed position is possible with an optional latching electrode. The MEM acceleration switch, which has applications for use as an environmental sensing device, can be fabricated using micromachining.

  19. Micro mass spectrometer on a chip.

    SciTech Connect (OSTI)

    Cruz, Dolores Y.; Blain, Matthew Glenn; Fleming, James Grant

    2005-11-01

    The design, simulation, fabrication, packaging, electrical characterization and testing analysis of a microfabricated a cylindrical ion trap ({mu}CIT) array is presented. Several versions of microfabricated cylindrical ion traps were designed and fabricated. The final design of the individual trap array element consisted of two end cap electrodes, one ring electrode, and a detector plate, fabricated in seven tungsten metal layers by molding tungsten around silicon dioxide (SiO{sub 2}) features. Each layer of tungsten is then polished back in damascene fashion. The SiO{sub 2} was removed using a standard release processes to realize a free-hung structure. Five different sized traps were fabricated with inner radii of 1, 1.5, 2, 5 and 10 {micro}m and heights ranging from 3-24 {micro}m. Simulations examined the effects of ion and neutral temperature, the pressure and nature of cooling gas, ion mass, trap voltage and frequency, space-charge, fabrication defects, and other parameters on the ability of micrometer-sized traps to store ions. The electrical characteristics of the ion trap arrays were determined. The capacitance was 2-500 pF for the various sized traps and arrays. The resistance was in the order of 1-2 {Omega}. The inductance of the arrays was calculated to be 10-1500 pH, depending on the trap and array sizes. The ion traps' field emission characteristics were assessed. It was determined that the traps could be operated up to 125 V while maintaining field emission currents below 1 x 10{sup -15} A. The testing focused on using the 5-{micro}m CITs to trap toluene (C{sub 7}H{sub 8}). Ion ejection from the traps was induced by termination of the RF voltage applied to the ring electrode and current measured on the collector electrode suggested trapping of ions in 1-10% of the traps. Improvements to the to the design of the traps were defined to minimize voltage drop to the substrate, thereby increasing trapping voltage applied to the ring electrode, and to allow for electron injection into, ion ejection from, and optical access to the trapping region.

  20. Moab Project Logs 2 Million Work Hours Without Lost-Time Injury...

    Energy Savers [EERE]

    Logs 2 Million Work Hours Without Lost-Time Injury or Illness Moab Project Logs 2 Million Work Hours Without Lost-Time Injury or Illness March 31, 2014 - 12:00pm Addthis Empty...

  1. Event Based Low Frequency Impedance Modeling using Well Logs and Seismic Attributes

    E-Print Network [OSTI]

    Mosegaard, Klaus

    prediction of this specific attribute. However, quantitative reservoir characterization in chalk is severelyEvent Based Low Frequency Impedance Modeling using Well Logs and Seismic Attributes Radmila logs. Seismic inversion, a process of converting seismic data into relative impedance, provides

  2. What is a blog? The word "blog," a contraction of "web log," is an informational web

    E-Print Network [OSTI]

    Zhou, Pei

    What is a blog? The word "blog," a contraction of "web log," is an informational web page's log, blogs on the web tend to maintain an ordered chronology, although they often unfold in reverse

  3. MHK ISDB/Instruments/INSENSE MICRO ELECTRICAL MECHANICAL SYSTEM | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View NewTexas:Montezuma, Arizona:Oregon:LowellMHKInformationInformation

  4. Comparison of VSP and sonic-log data in nonvertical wells in a heterogeneous structure

    E-Print Network [OSTI]

    Cerveny, Vlastislav

    geophysics, sonic-log measurements and vertical seismic profiling VSP are two techniques which provide and Ludk Klimes1 ABSTRACT To compare the results of sonic-log measurements and of vertical seismic profiling VSP , sonic-log velocities are used to estimate the corresponding traveltime in the geologic

  5. Quantitative interpretation of pulsed neutron capture logs: Part 1 --Fast numerical simulation

    E-Print Network [OSTI]

    Torres-Verdín, Carlos

    for shoulder-bed effects on R logs acquired in sand- shale laminated reservoirs. Because of diffusion effects responses of pure-sand and pure- shale end members of the sedimentary sequence. We have developed a new of waterflood residual oil saturation via the log-inject-log procedure (Richardson et al., 1973; Reedy, 1984

  6. Vehicle to Micro-Grid: Leveraging Existing Assets for Reliable Energy Management (Poster)

    SciTech Connect (OSTI)

    Simpson, M.; Markel, T.; O'Keefe, M.

    2010-12-01

    Fort Carson, a United States Army installation located south of Colorado Springs, Colorado, is seeking to be a net-zero energy facility. As part of this initiative, the base will be constructing a micro-grid that ties to various forms of renewable energy. To reduce petroleum consumption, Fort Carson is considering grid-connected vehicles (GCVs) such as pure electric trucks to replace some of its on-base truck fleet. As the availability and affordability of distributed renewable energy generation options increase, so will the GCV options (currently, three all-electric trucks are available on the GSA schedule). The presence of GCVs on-base opens up the possibility to utilize these vehicles to provide stability to the base micro-grid. This poster summarizes work to estimate the potential impacts of three electric vehicle grid interactions between the electric truck fleet and the Fort Carson micro-grid: 1) full-power charging without management, 2) full-power charging capability controlled by the local grid authority, and 3) full-power charge and discharge capability controlled by the local grid authority. We found that even at relatively small adoption rates, the control of electric vehicle charging at Fort Carson will aid in regulation of variable renewable generation loads and help stabilize the micro-grid.

  7. FUEL CELL/MICRO-TURBINE COMBINED CYCLE

    SciTech Connect (OSTI)

    Larry J. Chaney; Mike R. Tharp; Tom W. Wolf; Tim A. Fuller; Joe J. Hartvigson

    1999-12-01

    A wide variety of conceptual design studies have been conducted that describe ultra-high efficiency fossil power plant cycles. The most promising of these ultra-high efficiency cycles incorporate high temperature fuel cells with a gas turbine. Combining fuel cells with a gas turbine increases overall cycle efficiency while reducing per kilowatt emissions. This study has demonstrated that the unique approach taken to combining a fuel cell and gas turbine has both technical and economic merit. The approach used in this study eliminates most of the gas turbine integration problems associated with hybrid fuel cell turbine systems. By using a micro-turbine, and a non-pressurized fuel cell the total system size (kW) and complexity has been reduced substantially from those presented in other studies, while maintaining over 70% efficiency. The reduced system size can be particularly attractive in the deregulated electrical generation/distribution environment where the market may not demand multi-megawatt central stations systems. The small size also opens up the niche markets to this high efficiency, low emission electrical generation option.

  8. Property:FirstWellLog | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to: navigation,Property EditMimeType Jump to:FirstWellLog Jump to: navigation,

  9. Electric Vehicles

    ScienceCinema (OSTI)

    Ozpineci, Burak

    2014-07-23

    Burak Ozpineci sees a future where electric vehicles charge while we drive them down the road, thanks in part to research under way at ORNL.

  10. Electric Vehicles

    SciTech Connect (OSTI)

    Ozpineci, Burak

    2014-05-02

    Burak Ozpineci sees a future where electric vehicles charge while we drive them down the road, thanks in part to research under way at ORNL.

  11. The SME boom in rural South Africa links to electricity and telephony

    E-Print Network [OSTI]

    -) ) The SME boom in rural South Africa links to electricity and telephony Paper to be presented in rural South Africa, with a special focus on electricity and telephone access. The micro data we analyse of the historically disadvantaged "deep rural" areas. In parallel to a doubled electricity access, we find a 14-fold

  12. How does an electrical signal propagate in a neuron? Traditional cable theory,

    E-Print Network [OSTI]

    Holcman, David

    How does an electrical signal propagate in a neuron? Traditional cable theory, which was refined action between the local electric field and diffusional flux, an assumption that cannot be made for small opened a new frontier in elec trophysiology, allowing us to measure electrical phenomena within the micro

  13. Micro-machined calorimetric biosensors

    DOE Patents [OSTI]

    Doktycz, Mitchel J. (Knoxville, TN); Britton, Jr., Charles L. (Alcoa, TN); Smith, Stephen F. (Loudon, TN); Oden, Patrick I. (Plano, TX); Bryan, William L. (Knoxville, TN); Moore, James A. (Powell, TN); Thundat, Thomas G. (Knoxville, TN); Warmack, Robert J. (Knoxville, TN)

    2002-01-01

    A method and apparatus are provided for detecting and monitoring micro-volumetric enthalpic changes caused by molecular reactions. Micro-machining techniques are used to create very small thermally isolated masses incorporating temperature-sensitive circuitry. The thermally isolated masses are provided with a molecular layer or coating, and the temperature-sensitive circuitry provides an indication when the molecules of the coating are involved in an enthalpic reaction. The thermally isolated masses may be provided singly or in arrays and, in the latter case, the molecular coatings may differ to provide qualitative and/or quantitative assays of a substance.

  14. Log of Changes to IMA Mineral List This log file was begun in June 2010 to keep track of changes to the IMA list of minerals

    E-Print Network [OSTI]

    Downs, Robert T.

    1 Log of Changes to IMA Mineral List This log file was begun in June 2010 to keep track of changes to the IMA list of minerals at http://rruff.info/IMA. 2 August 2013: Eltyubyuite: New mineral descriptions of wadalite: a new mineral from the Northern Caucasus, Kabardino-Balkaria, Russia. European Journal

  15. Stirling engines for gas fired micro-cogen and cooling

    SciTech Connect (OSTI)

    Lane, N.W.; Beale, W.T.

    1996-12-31

    This paper describes the design and performance of free-piston Stirling engine-alternators particularly suited for use as natural gas fired micro-cogen and cooling devices. Stirling based cogen systems offer significant potential advantages over internal combustion engines in efficiency, to maintain higher efficiencies at lower power levels than than combustion engines significantly expands the potential for micro-cogen. System cost reduction and electric prices higher than the U.S. national average will have a far greater effect on commercial success than any further increase in Stirling engine efficiency. There exist niche markets where Stirling engine efficiency. There exist niche markets where Stirling based cogen systems are competitive. Machines of this design are being considered for production in the near future as gas-fired units for combined heat and power in sufficiently large quantities to assure competitive prices for the final unit.

  16. COMPARING UTILITY CONNECTED TO STAND ALONE MICRO-GRIDS: FROM THE VIEWPOINT OF A UTILITY ENGINEER

    SciTech Connect (OSTI)

    Hoffman, Michael G.; Russo, Bryan J.

    2011-06-23

    Project examples of grid connected micro grid & example of grid isolated micro grid: drivers – economic, environmental and financial tools to plan/design modeling software resource options, tools to plan/design generation types, fuel options and services to provide smooth transitions required equipment and software controls minimal expense to maximum functionality, real time operational interfaces, getting it built real world complications and advice. This paper is an attempt to present a broad overview of micro grids, project examples, modeling tools, technology options, practical and business insights to enable those interested in micro-grids to quickly come up to speed on the basics and potentially move forward on their own projects with the tools and resources presented. Knowledge and experience with electrical distribution systems will make such an effort easier.

  17. Electric machine

    DOE Patents [OSTI]

    El-Refaie, Ayman Mohamed Fawzi (Niskayuna, NY); Reddy, Patel Bhageerath (Madison, WI)

    2012-07-17

    An interior permanent magnet electric machine is disclosed. The interior permanent magnet electric machine comprises a rotor comprising a plurality of radially placed magnets each having a proximal end and a distal end, wherein each magnet comprises a plurality of magnetic segments and at least one magnetic segment towards the distal end comprises a high resistivity magnetic material.

  18. Micro-scale Processing of Silk Protein

    E-Print Network [OSTI]

    Breslauer, David Nate

    2010-01-01

    W. Lo, et al. (2006). "Replica molding of high-aspect-ratioand high aspect ratio molding of nano- and micro-structures.Ratio Silk Nano- and Micro-molding .74 6.1

  19. Micro-machined resonator oscillator

    DOE Patents [OSTI]

    Koehler, D.R.; Sniegowski, J.J.; Bivens, H.M.; Wessendorf, K.O.

    1994-08-16

    A micro-miniature resonator-oscillator is disclosed. Due to the miniaturization of the resonator-oscillator, oscillation frequencies of one MHz and higher are utilized. A thickness-mode quartz resonator housed in a micro-machined silicon package and operated as a telemetered sensor beacon'' that is, a digital, self-powered, remote, parameter measuring-transmitter in the FM-band. The resonator design uses trapped energy principles and temperature dependence methodology through crystal orientation control, with operation in the 20--100 MHz range. High volume batch-processing manufacturing is utilized, with package and resonator assembly at the wafer level. Unique design features include squeeze-film damping for robust vibration and shock performance, capacitive coupling through micro-machined diaphragms allowing resonator excitation at the package exterior, circuit integration and extremely small (0.1 in. square) dimensioning. A family of micro-miniature sensor beacons is also disclosed with widespread applications as bio-medical sensors, vehicle status monitors and high-volume animal identification and health sensors. The sensor family allows measurement of temperatures, chemicals, acceleration and pressure. A microphone and clock realization is also available. 21 figs.

  20. Micro-machined resonator oscillator

    DOE Patents [OSTI]

    Koehler, Dale R. (Albuquerque, NM); Sniegowski, Jeffry J. (Albuquerque, NM); Bivens, Hugh M. (Albuquerque, NM); Wessendorf, Kurt O. (Albuquerque, NM)

    1994-01-01

    A micro-miniature resonator-oscillator is disclosed. Due to the miniaturization of the resonator-oscillator, oscillation frequencies of one MHz and higher are utilized. A thickness-mode quartz resonator housed in a micro-machined silicon package and operated as a "telemetered sensor beacon" that is, a digital, self-powered, remote, parameter measuring-transmitter in the FM-band. The resonator design uses trapped energy principles and temperature dependence methodology through crystal orientation control, with operation in the 20-100 MHz range. High volume batch-processing manufacturing is utilized, with package and resonator assembly at the wafer level. Unique design features include squeeze-film damping for robust vibration and shock performance, capacitive coupling through micro-machined diaphragms allowing resonator excitation at the package exterior, circuit integration and extremely small (0.1 in. square) dimensioning. A family of micro-miniature sensor beacons is also disclosed with widespread applications as bio-medical sensors, vehicle status monitors and high-volume animal identification and health sensors. The sensor family allows measurement of temperatures, chemicals, acceleration and pressure. A microphone and clock realization is also available.

  1. A THIRD GENERATION MICRO-VEHICLE TESTBED FOR COOPERATIVE CONTROL AND SENSING STRATEGIES

    E-Print Network [OSTI]

    Bertozzi, Andrea L.

    @hmc.edu Xinheng Huang, David S. Hermina Martinez Department of Electrical Engineering, University of California al., 2007), we developed a robust testbed based on modified toy #12;cars that was successful processing and send com- mands to the micro-cars, which lacked any form of on-board computing or sensors

  2. Aalborg Universitet Reforming processes for micro combined heat and powersystem based on solid oxide

    E-Print Network [OSTI]

    Liso, Vincenzo

    Fuel cell systems are being developed for supply- ing primary power (heat and electricity) for resi FOR MICRO COMBINED HEAT AND POWER SYSTEM BASED ON SOLID OXIDE FUEL CELL Vincenzo Liso1 , Mads Pagh Nielsen and the possibility to use high quality heat for cogeneration. In this work, different configurations of SOFC systems

  3. Multiphysics modeling of a micro-scale Stirling refrigeration system Dongzhi Guo a

    E-Print Network [OSTI]

    McGaughey, Alan

    Multiphysics modeling of a micro-scale Stirling refrigeration system Dongzhi Guo a , Alan J.H. Mc Engineering, Carnegie Mellon University, Pittsburgh, PA 15213-3890, USA b Department of Electrical and Computer Engineering, Carnegie Mellon University, 5000 Forbes Ave, Pittsburgh, PA 15213-3890, USA a r t i c

  4. Micro-and nanoscale domain engineering in lithium niobate and lithium tantalate

    E-Print Network [OSTI]

    Byer, Robert L.

    Micro- and nanoscale domain engineering in lithium niobate and lithium tantalate Vladimir Ya. Shur investigation of the domain evolution in lithium niobate and lithium tantalate during backswitched electric sources based on quasi-phase matching.11 Lithium niobate LiNbO3 (LN) and lithium tantalate LiTaO3 (LT

  5. Micro Structures in Thin Coating Layers: Micro Structure Evolution and Macroscopic

    E-Print Network [OSTI]

    Rumpf, Martin

    Micro Structures in Thin Coating Layers: Micro Structure Evolution and Macroscopic Contact Angle J structures of coating surfaces lead to new industrial applications. They allow to steer the wetting the formation of micro structures in the drying process of a coating. Furthermore, for a given micro structured

  6. A thermally self-sustained micro-power plant with integrated micro-solid oxide fuel cells, micro-reformer and functional

    E-Print Network [OSTI]

    Daraio, Chiara

    is successfully demonstrated. The micro-power plant consists of micro-SOFCs, a micro-reactor and a gas carrierA thermally self-sustained micro-power plant with integrated micro-solid oxide fuel cells, micro l i g h t s g r a p h i c a l a b s t r a c t The assembly and operation of a micro-power plant

  7. Electrical connector

    DOE Patents [OSTI]

    Dilliner, Jennifer L.; Baker, Thomas M.; Akasam, Sivaprasad; Hoff, Brian D.

    2006-11-21

    An electrical connector includes a female component having one or more receptacles, a first test receptacle, and a second test receptacle. The electrical connector also includes a male component having one or more terminals configured to engage the one or more receptacles, a first test pin configured to engage the first test receptacle, and a second test pin configured to engage the second test receptacle. The first test receptacle is electrically connected to the second test receptacle, and at least one of the first test pin and the second test pin is shorter in length than the one or more terminals.

  8. Oak Ridge Micro Energy Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceII Jump to:Information 3rd|Northfork ElectricName0 Jump to:Oahu,WindPoint,Micro

  9. arXiv:0909.0288v2[math.AG]16May2010 GEOGRAPHY OF LOG MODELS

    E-Print Network [OSTI]

    Cheltsov, Ivan

    arXiv:0909.0288v2[math.AG]16May2010 GEOGRAPHY OF LOG MODELS: THEORY AND APPLICATIONS. V.V. SHOKUROV AND SUNG RAK CHOI Abstract. An introduction to geography of log models with ap- plications to positive 2. Geography of log models 2 3. Positive cones 13 4. Finiteness results for log models 18 5

  10. electrical, engineering

    E-Print Network [OSTI]

    school of electrical, computer and energy engineering Annual Report 2012-2013 Breaking the final systems engineering Marco Santello, School Director enrollment 930 undergraduate 771 graduate 159 DEGREE PROGRAM biomedical engineering (Harrington Bioengineering program) school of computing, informatics

  11. Electrical, Engineering

    E-Print Network [OSTI]

    School of Electrical, Computer and Energy Engineering 2009-2010 Annual Report #12;Organizational Structure for Ira A. Fulton Schools of Engineering Schools (Director) Lead These Engineering Undergraduate Degree Programs Coordinate Across Engineering for These Grand Challenge Areas... Biological & Health

  12. Engineering Electrical &

    E-Print Network [OSTI]

    Hickman, Mark

    Computer Engineering Electrical & Electronic Engineering Mechatronics Engineering Mechanical Engineering Civil Engineering Natural Resources Engineering Forest Engineering Chemical & Process Engineering ELECTIVE 2 Required Engineering Intermediate Year 2011 Eight Required Courses Chart: 120 points College

  13. Engineering Electrical &

    E-Print Network [OSTI]

    Hickman, Mark

    Computer Engineering Electrical & Electronic Engineering Mechatronics Engineering Mechanical Engineering Civil Engineering Natural Resources Engineering Forest Engineering Chemical & Process Engineering ELECTIVE 2 Required Engineering Intermediate Year 2012 Eight Required Courses Chart: 120 points College

  14. Electric generator

    DOE Patents [OSTI]

    Foster, Jr., John S. (Pleasanton, CA); Wilson, James R. (Livermore, CA); McDonald, Jr., Charles A. (Danville, CA)

    1983-01-01

    1. In an electrical energy generator, the combination comprising a first elongated annular electrical current conductor having at least one bare surface extending longitudinally and facing radially inwards therein, a second elongated annular electrical current conductor disposed coaxially within said first conductor and having an outer bare surface area extending longitudinally and facing said bare surface of said first conductor, the contiguous coaxial areas of said first and second conductors defining an inductive element, means for applying an electrical current to at least one of said conductors for generating a magnetic field encompassing said inductive element, and explosive charge means disposed concentrically with respect to said conductors including at least the area of said inductive element, said explosive charge means including means disposed to initiate an explosive wave front in said explosive advancing longitudinally along said inductive element, said wave front being effective to progressively deform at least one of said conductors to bring said bare surfaces thereof into electrically conductive contact to progressively reduce the inductance of the inductive element defined by said conductors and transferring explosive energy to said magnetic field effective to generate an electrical potential between undeformed portions of said conductors ahead of said explosive wave front.

  15. Lithology and well log study of Campbell E-2 geothermal test...

    Open Energy Info (EERE)

    Lithology and well log study of Campbell E-2 geothermal test well, Humboldt House geothermal prospect, Pershing County, Nevada Jump to: navigation, search OpenEI Reference...

  16. Development of micro analytical devices

    E-Print Network [OSTI]

    Deshpande, Abhishek Girish

    2009-11-17

    be as small as few pico-litres, which is of particular interest in fine chemical industries where reagents are extremely expensive. Using small amounts will not only make the process economical but also reduce the amount of waste produced. • Low Reynolds... of reduced nicotinamide adenine dinucleotide (NADH) that is required for the conversion of pyruvate to L-lactate inside an electrochemical microreactor [33]. 1 . 3 .2.3 Separation Scaling separations by using micro-scale devices is yet another...

  17. Development of a time projection chamber with micro pixel electrodes

    E-Print Network [OSTI]

    H. Kubo; K. Miuchi; T. Nagayoshi; A. Ochi; R. Orito; A. Takada; T. Tanimori; M. Ueno

    2003-01-09

    A time projection chamber (TPC) based on a gaseous chamber with micro pixel electrodes (micro-PIC) has been developed for measuring three-dimensional tracks of charged particles. The micro-PIC with a detection area of 10 cm square consists of a double-sided printing circuit board. Anode pixels are formed with 0.4 mm pitch on strips aligned perpendicular to the cathode strips in order to obtain a two-dimensional position. In the TPC with drift length of 8 cm, 4 mm wide field cage electrodes are aligned at 1mm spaces and a uniform electric field of about 0.4 kV/cm is produced. For encoding of the three-dimensional position a synchronous readout system has been developed using Field Programmable Gate Arrays with 40 MHz clock. This system enables us to reconstruct the three-dimensional track of the particle at successive points like a cloud chamber even at high event rate. The drift velocity of electrons in the TPC was measured with the tracks of cosmic muons for three days, during which the TPC worked stably with the gas gain of 3000. With a radioisotope of gamma-ray source the three-dimensional track of a Compton scattered electron was taken successfully.

  18. Electrically powered hand tool

    DOE Patents [OSTI]

    Myers, Kurt S.; Reed, Teddy R.

    2007-01-16

    An electrically powered hand tool is described and which includes a three phase electrical motor having a plurality of poles; an electrical motor drive electrically coupled with the three phase electrical motor; and a source of electrical power which is converted to greater than about 208 volts three-phase and which is electrically coupled with the electrical motor drive.

  19. A Micro-Grid Simulator Tool (SGridSim) using Effective Node-to-Node Complex Impedance (EN2NCI) Models

    SciTech Connect (OSTI)

    Udhay Ravishankar; Milos manic

    2013-08-01

    This paper presents a micro-grid simulator tool useful for implementing and testing multi-agent controllers (SGridSim). As a common engineering practice it is important to have a tool that simplifies the modeling of the salient features of a desired system. In electric micro-grids, these salient features are the voltage and power distributions within the micro-grid. Current simplified electric power grid simulator tools such as PowerWorld, PowerSim, Gridlab, etc, model only the power distribution features of a desired micro-grid. Other power grid simulators such as Simulink, Modelica, etc, use detailed modeling to accommodate the voltage distribution features. This paper presents a SGridSim micro-grid simulator tool that simplifies the modeling of both the voltage and power distribution features in a desired micro-grid. The SGridSim tool accomplishes this simplified modeling by using Effective Node-to-Node Complex Impedance (EN2NCI) models of components that typically make-up a micro-grid. The term EN2NCI models means that the impedance based components of a micro-grid are modeled as single impedances tied between their respective voltage nodes on the micro-grid. Hence the benefit of the presented SGridSim tool are 1) simulation of a micro-grid is performed strictly in the complex-domain; 2) faster simulation of a micro-grid by avoiding the simulation of detailed transients. An example micro-grid model was built using the SGridSim tool and tested to simulate both the voltage and power distribution features with a total absolute relative error of less than 6%.

  20. Fluid-Rock Characterization and Interactions in NMR Well Logging

    SciTech Connect (OSTI)

    Hirasaki, George J.; Mohanty, Kishore, K.

    2001-07-13

    The objective of this project is to characterize the fluid properties and fluid-rock interactions that are needed for formation evaluation by NMR well logging. This is the first annual progress report submitted to the DOE. It reports on the work completed during the reporting period even if it may have started before this period. This project is a partnership between Professor George J. Hirasaki at Rice University and Professor Kishore Mohanty at University of Houston. In addition to the DOE, this project is supported by a consortium of oil companies and service companies. The fluid properties characterization has emphasized the departure of live oils from correlations based on dead oils. Also, asphaltic components can result in a difference between the T1 and T2 relaxation time distributions as well as reduce the hydrogen index. The fluid rock characterizations that are reported here are the effects of wettability and internal magnetic field gradients. A pore reconstruction method ha s been developed to recreate three-dimensional porous media from two-dimensional images that reproduce some of their key statistical properties. A Monte Carlo simulation technique has been developed to calculate the magnetization decay in fluid saturated porous media given their pore structure.

  1. A methodology for understanding the impacts of large-scale penetration of micro-combined heat and power

    SciTech Connect (OSTI)

    Tapia-Ahumada, K.; Pérez-Arriaga, I. J.; Moniz, Ernest J.

    2013-10-01

    Co-generation at small kW-e scale has been stimulated in recent years by governments and energy regulators as one way to increasing energy efficiency and reducing CO2emissions. If a widespread adoption should be realized, their effects from a system's point of view are crucial to understand the contributions of this technology. Based on a methodology that uses long-term capacity planning expansion, this paper explores some of the implications for an electric power system of having a large number of micro-CHPs. Results show that fuel cells-based micro-CHPs have the best and most consistent performance for different residential demands from the customer and system's perspectives. As the penetration increases at important levels, gas-based technologies - particularly combined cycle units - are displaced in capacity and production, which impacts the operation of the electric system during summer peak hours. Other results suggest that the tariff design impacts the economic efficiency of the system and the operation of micro-CHPs under a price-based strategy. Finally, policies aimed at micro-CHPs should consider the suitability of the technology (in size and heat-to-power ratio) to meet individual demands, the operational complexities of a large penetration, and the adequacy of the economic signals to incentivize an efficient and sustainable operation. Highlights: Capacity displacements and daily operation of an electric power system are explored; Benefits depend on energy mix, prices, and micro-CHP technology and control scheme; Benefits are observed mostly in winter when micro-CHP heat and power are fully used; Micro-CHPs mostly displace installed capacity from natural gas combined cycle units; and, Tariff design impacts economic efficiency of the system and operation of micro-CHPs.

  2. SIMULATION OF RESISTIVITY LOGGING-WHILE-DRILLING (LWD) MEASUREMENTS USING A SELF-ADAPTIVE

    E-Print Network [OSTI]

    Torres-Verdín, Carlos

    SIMULATION OF RESISTIVITY LOGGING-WHILE-DRILLING (LWD) MEASUREMENTS USING A SELF-ADAPTIVE GOAL simulate electromagnetic (EM) measurements acquired with a Logging-While- Drilling (LWD) instrument-oriented hp-adaptivity becomes essential to simulate LWD instruments, since it reduces the computational cost

  3. Annual Logging Symposium, May 14-18, 2011 RAPID MODELING OF LWD NUCLEAR MEASUREMENTS ACQUIRED

    E-Print Network [OSTI]

    Torres-Verdín, Carlos

    SPWLA 52nd Annual Logging Symposium, May 14-18, 2011 1 RAPID MODELING OF LWD NUCLEAR MEASUREMENTS Reliable interpretation of nuclear logging-while-drilling (LWD) measurements acquired in thinly-sector LWD responses in high-angle and horizontal (HA/HZ) wells. We introduce a fast method for numerical

  4. IPL-P: In-Page Logging with PCRAM Kangnyeon Kim

    E-Print Network [OSTI]

    Moon, Bongki

    of flash memory. We report a few advantages of this new design that will make IPL more suitable for flashIPL-P: In-Page Logging with PCRAM Kangnyeon Kim School of Info. & Comm. Engr. Sungkyunkwan (IPL) by augment- ing it with Phase Change RAM (PCRAM) in its log area. IPL is a buffer and storage

  5. Accelerating In-Page Logging with Non-Volatile Memory Sang-Won Lee

    E-Print Network [OSTI]

    Moon, Bongki

    memory. We report a few advantages of this new design that will make IPL more suitable for flash memory competitive in both capacity and price. In this paper, we present an improved design of In-Page Logging (IPL) by augmenting it with phase change RAM (PCRAM) in its log area. IPL is a buffer and storage man- agement

  6. MATHEMATICS AND SCIENCE CENTERS STUDENT SERVICES ACTIVITY LOG/EVENT RECORD

    E-Print Network [OSTI]

    MATHEMATICS AND SCIENCE CENTERS STUDENT SERVICES ACTIVITY LOG/EVENT RECORD Use this log for all): (Check one) ______ GENDER: RACE/ETHNICITY: ___ Mathematics ____ Female ___ Am. Indian/Alaska Native student career and college ___ Mathematics awareness in STEM fields? ___ Yes ___ No ___ Science

  7. Computing Reliability Distributions of Windowed Max-log-map (MLM) Detectors : ISI Channels

    E-Print Network [OSTI]

    Kavcic, Aleksandar

    Computing Reliability Distributions of Windowed Max-log-map (MLM) Detectors : ISI Channels Fabian-log-map (MLM) detector has well-known appli- cations to the intersymbol interefence (ISI) channel [1, · · · , is trans- mitted across the ISI channel. Let the following random This work was performed when F. Lim

  8. Discovering Block-Structured Process Models From Event Logs -A Constructive Approach

    E-Print Network [OSTI]

    van der Aalst, Wil

    Discovering Block-Structured Process Models From Event Logs - A Constructive Approach S University of Technology, P.O. Box 513, NL-5600 MB, Eindhoven, The Netherlands Abstract Process discovery is the problem of, given a log of observed behaviour, finding a process model that `best' describes

  9. Down the borehole but outside the box: innovative approaches to wireline log data interpretation

    E-Print Network [OSTI]

    Bodin, Thomas

    Down the borehole but outside the box: innovative approaches to wireline log data interpretation or more different properties, with depth down a borehole. They are routinely correlated with, and, such as oil and gas, wireline log interpretation is highly developed. In other industries, such as geothermal

  10. P2P Logging and Timestamping for Reconciliation Mounir Tlili, W. Kokou Dedzoe,

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    P2P Logging and Timestamping for Reconciliation Mounir Tlili, W. Kokou Dedzoe, Esther Pacitti-INRIA {FirstName.LastName}@loria.fr ABSTRACT In this paper, we address data reconciliation in peer-to-peer (P2P) collaborative applications. We propose P2P-LTR (Logging and Timestamping for Reconciliation) which provides P2P

  11. PROCESS MINING OF EVENT LOGS IN AUDITING: OPPORTUNITIES AND Hasselt University

    E-Print Network [OSTI]

    1 PROCESS MINING OF EVENT LOGS IN AUDITING: OPPORTUNITIES AND CHALLENGES Mieke Jans Hasselt 15, 20101 1 Comments are welcome and may be addressed to mieke.jans@uhasselt.be. #12;2 PROCESS MINING that process mining of event logs can provide to internal and external auditors. Process mining aims to extract

  12. Discovering Structured Event Logs from Unstructured Audit Trails for Workflow Mining

    E-Print Network [OSTI]

    Discovering Structured Event Logs from Unstructured Audit Trails for Workflow Mining Liqiang Geng1@ucalgary.ca, {larry.korba, hongyu.liu, yunlin.wang}@nrc.gc.ca Abstract. Workflow mining aims to find graph workflow mining techniques mainly deal with well-structured and -symbolized event logs. In most real

  13. THE EXTENT AND CAUSES OF ILLEGAL LOGGING: AN ANALYSIS OF A MAJOR CAUSE OF TROPICAL

    E-Print Network [OSTI]

    THE EXTENT AND CAUSES OF ILLEGAL LOGGING: AN ANALYSIS OF A MAJOR CAUSE OF TROPICAL DEFORESTATION;2 THE EXTENT AND CAUSES OF ILLEGAL LOGGING: AN ANALYSIS OF A MAJOR CAUSE OF TROPICAL DEFORESTATION IN INDONESIA (CIFOR). ISSN 0967-8875 #12;3 Abstract: This paper considers the scale and underlying causes of recent

  14. Measuring the Effect of Selective Logging on Tropical Forest-Atmosphere Exchange

    E-Print Network [OSTI]

    Goulden, Michael L.

    and low impact extraction methods 1. Conventional Selective Logging: ·Large percent of canopy/soil can takes advantage of newly available PAR. · Reduced Impact Logging and/or Light Harvest resulted in little disturbance. · These are dry season data - chambers indicate decomposition is water limited. POSSIBLE

  15. Reservoir parameters estimation from well log and core data: a case study from the North Sea

    E-Print Network [OSTI]

    Edinburgh, University of

    Reservoir parameters estimation from well log and core data: a case study from the North Sea Jun approach to derive reservoir parameters from core and well-log data in clay­sand mixtures. This method volume, clay content, permeability and fluid saturation. This information is then fed into a velocity

  16. Annual Logging Symposium, June 19-23, 2010 JOINT PROCESSING OF FORWARD AND BACKWARD EXTENDED

    E-Print Network [OSTI]

    Torres-Verdín, Carlos

    Copyright 2010, held jointly by the Society of Petrophysicists and Well Log Analysts (SPWLA) and the submitting authors. This paper was prepared for presentation at the SPWLA 51st Annual Logging Symposium held the assessment of drilling-induced formation damage because it associates high- and low-frequency slownesses

  17. human_subjects_payment_log_less_fifty.docx LAST UPDATED: March 16, 2012 Financial Operations Office

    E-Print Network [OSTI]

    Yu, Gexin

    human_subjects_payment_log_less_fifty.docx LAST UPDATED: March 16, 2012 Financial Operations and Mary Human Subject Payment Log (HSPL) (Use when payment to human subject(s) is $50 or less) RELATED POLICY: Paying Human Subjects for Research Studies The College of William and Mary (the College

  18. Integration of Geology, Rock-Physics, Logs, and Pre-stack Seismic for Reservoir Porosity Estimation

    E-Print Network [OSTI]

    Al Muhaidib, Abdulaziz

    2011-01-01

    The main objective of this paper is to obtain reservoir properties, such as porosity, both at the well locations and in the inter-well regions from seismic data and well logs. The seismic and well-log datasets are from an ...

  19. Annual Logging Symposium, June 19-23, 2010 QUANTITATIVE INTERPRETATION OF PULSED NEUTRON

    E-Print Network [OSTI]

    Torres-Verdín, Carlos

    for shoulder-bed effects on PNC logs acquired in sand- shale laminated reservoirs. Due to diffusion effects the sigma responses of pure-sand and pure-shale end members of the sedimentary sequence. We introduce a new measurements. The extension of time-lapse logging in waterflooded reservoirs is the estimation of waterflood

  20. Android Diabetes Log Book E-mail: kongkamol@kku.ac.th

    E-Print Network [OSTI]

    Runapongsa, Kanda

    Android Diabetes Log Book 1 2 3 1 . . 40002 2, 3 . . 40002 E-mail: kongkamol@kku.ac.th Abstract. Generally, the patients record their health conditions in patients' log book. An android application had. Keywords: android application, diabetes 4.07 5.00 , 1. 285 . . 2573 435 . . 2552 558,156 7,019 [1] 15 7% [2

  1. Coal-log pipeline system development. Fifth quarterly report, August 25, 1991--November 25, 1991

    SciTech Connect (OSTI)

    Liu, H.

    1991-12-01

    Project tasks include: (1) Perform the necessary testing and development to demonstrate that the amount of binder in coal logs can be reduced to 8% or lower to produce logs with adequate strength to eliminate breakage during pipeline transportation, under conditions experienced in long distance pipeline systems. Prior to conducting any testing and demonstration, grantee shall perform an information search and make full determination of all previous attempts to extrude or briquette coal, upon which the testing and demonstration shall be based. (2) Perform the necessary development to demonstrate a small model of the most promising injection system for coal-logs, and tests the logs produced. (3) Conduct economic analysis of coal-log pipeline, based upon the work to date. Refine and complete the economic model. (VC)

  2. FMI Log At Wister Area (DOE GTP) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePowerEdisto Electric Coop,Erosion

  3. Micro-unmanned aerodynamic vehicle

    DOE Patents [OSTI]

    Reuel, Nigel (Rio Rancho, NM); Lionberger, Troy A. (Ann Arbor, MI); Galambos, Paul C. (Albuquerque, NM); Okandan, Murat (Albuquerque, NM); Baker, Michael S. (Albuquerque, NM)

    2008-03-11

    A MEMS-based micro-unmanned vehicle includes at least a pair of wings having leading wing beams and trailing wing beams, at least two actuators, a leading actuator beam coupled to the leading wing beams, a trailing actuator beam coupled to the trailing wing beams, a vehicle body having a plurality of fulcrums pivotally securing the leading wing beams, the trailing wing beams, the leading actuator beam and the trailing actuator beam and having at least one anisotropically etched recess to accommodate a lever-fulcrum motion of the coupled beams, and a power source.

  4. Smart Microfabricated Preconcentrator (and Other Micro Analytical...

    Office of Scientific and Technical Information (OSTI)

    Smart Microfabricated Preconcentrator (and Other Micro Analytical Detection Components&Systems). Citation Details In-Document Search Title: Smart Microfabricated Preconcentrator...

  5. AVTA Federal Fleet PEV Readiness Data Logging and Characterization Study for the United States Forest Service: Caribou-Targhee National Forest

    SciTech Connect (OSTI)

    Stephen Schey; Jim Francfort; Ian Nienhueser

    2014-06-01

    Battelle Energy Alliance, LLC, managing and operating contractor for the U.S. Department of Energy’s Idaho National Laboratory, is the lead laboratory for U.S. Department of Energy Advanced Vehicle Testing. Battelle Energy Alliance, LLC contracted with Intertek Testing Services, North America (ITSNA) to collect and evaluate data on federal fleet operations as part of the Advanced Vehicle Testing Activity’s Federal Fleet Vehicle Data Logging and Characterization study. The Advanced Vehicle Testing Activity study seeks to collect and evaluate data to validate the utilization of advanced electric drive vehicle transportation. This report focuses on the Caribou-Targhee National Forest (CTNF) fleet to identify daily operational characteristics of select vehicles and report findings on vehicle and mission characterizations to support the successful introduction of plug-in electric vehicles (PEVs) into the agencies’ fleets. Individual observations of these selected vehicles provide the basis for recommendations related to electric vehicle adoption and whether a battery electric vehicle (BEV) or plug-in hybrid electric vehicle (PHEV) (collectively plug-in electric vehicles, or PEVs) can fulfill the mission requirements. ITSNA acknowledges the support of Idaho National Laboratory and CTNF for participation in the study. ITSNA is pleased to provide this report and is encouraged by enthusiasm and support from the Forest Service and CTNF personnel.

  6. Reservoir characterization of the Melbourn and F-39 sands in the Lavaca Bay field using integration of log, core and production data 

    E-Print Network [OSTI]

    Hong, Cecelia

    1993-01-01

    ) is an expression for ratio of water saturation in the uninvaded and flushed zones. Rw was estimated using Equaflon (3. 1d) Rmf was obtained from the log heading and corrected to Tf . . (3. 1d) where: K= 60+0. 133 Tf Assumption: R deep = Rt R shallow = Rxo... to conduct electricity and this accounts for Ro ) Rw. Rw is the resistivity of the formation water only. Ro is proportional to Rw The formation factor, F is the proportionality constant. Ro = F~Rw. . . (3. 3a) Using Archie's water saturation equation...

  7. THE POTENTIAL FOR MICRO-ALGAE AND OTHER "MICRO-CROPS" TO PRODUCE

    E-Print Network [OSTI]

    Edwards, Paul N.

    THE POTENTIAL FOR MICRO-ALGAE AND OTHER "MICRO-CROPS" TO PRODUCE SUSTAINABLE BIOFUELS A REVIEW INTRODUCTION Biofuel derived from algae and other micro-crops has been proposed as an environmentally benign transportation fuel. Algae can be cultivated on low productivity lands using low quality water. Interest in algae

  8. AVTA Federal Fleet PEV Readiness Data Logging and Characterization Study for the National Park Service: Fort Vancouver National Historic Site

    SciTech Connect (OSTI)

    Stephen Schey; Jim Francfort

    2014-03-01

    Battelle Energy Alliance, LLC, managing and operating contractor for the U.S. Department of Energy’s Idaho National Laboratory, is the lead laboratory for the U.S. Department of Energy’s Advanced Vehicle Testing. Battelle Energy Alliance, LLC contracted with Intertek Testing Services, North America (ITSNA) to collect data on federal fleet operations as part of the Advanced Vehicle Testing Activity’s Federal Fleet Vehicle Data Logging and Characterization study. The Advanced Vehicle Testing Activity study seeks to collect data to validate the use of advanced electric drive vehicle transportation. This report focuses on the Fort Vancouver National Historic Site (FVNHS) fleet to identify daily operational characteristics of select vehicles and report findings on vehicle and mission characterizations to support the successful introduction of electric vehicles (EVs) into the agencies’ fleet. Individual observations of the selected vehicles provided the basis for recommendations related to EV adoption and whether a battery electric vehicle (BEV) or plug-in hybrid electric vehicle (PHEV) (collectively plug-in electric vehicles) could fulfill the mission requirements. FVNHS identified three vehicles in its fleet for consideration. While the FVNHS vehicles conduct many different missions, only two (i.e., support and pool missions) were selected by agency management to be part of this fleet evaluation. The logged vehicles included a pickup truck and a minivan. This report will show that BEVs and PHEVs are capable of performing the required missions and providing an alternative vehicle for both mission categories, because each has sufficient range for individual trips and time available each day for charging to accommodate multiple trips per day. These charging events could occur at the vehicle’s home base, high-use work areas, or in intermediate areas along routes that the vehicles frequently travel. Replacement of vehicles in the current fleet would result in significant reductions in emission of greenhouse gases and petroleum use, while also reducing fuel costs. The Vancouver, Washington area and neighboring Portland, Oregon are leaders in adoption of PEVs in the United States1. PEV charging stations, or more appropriately identified as electric vehicle supply equipment, located on the FVNHS facility would be a benefit for both FVNHS fleets and general public use. Fleet drivers and park visitors operating privately owned plug-in electric vehicles benefit by using the charging infrastructure. ITSNA recommends location analysis of the FVNHS site to identify the optimal station placement for electric vehicle supply equipment. ITSNA recognizes the support of Idaho National Laboratory and ICF International for their efforts to initiate communication with the National Parks Service and FVNHS for participation in this study. ITSNA is pleased to provide this report and is encouraged by the high interest and support from the National Park Service and FVNHS personnel

  9. Elemental imaging of organic matter and associated metals in ore deposits using micro PIXE and micro-EBS

    E-Print Network [OSTI]

    Devernal, Anne

    Elemental imaging of organic matter and associated metals in ore deposits using micro PIXE Uranium Witwatersrand a b s t r a c t Micro-PIXE and micro-EBS analyses were carried out on samples from of organic matter in the formation of this deposit. Micro-PIXE and Micro-EBS shows a very complex metal

  10. Department of Electrical and Computer Engineering Fall 2011 Seminar Series

    E-Print Network [OSTI]

    Pal, Ranadip

    of California, Davis Abstract: RF Micro-ElectroMechanical Systems (RF-MEMS) has been an emerging technologyDepartment of Electrical and Computer Engineering Fall 2011 Seminar Series Seminar Title: 3-D RF-MEMS cost. This talk presents recent development in novel three-dimensional RF-MEMS tunable resonators

  11. High Temperatures & Electricity Demand

    E-Print Network [OSTI]

    High Temperatures & Electricity Demand An Assessment of Supply Adequacy in California Trends.......................................................................................................1 HIGH TEMPERATURES AND ELECTRICITY DEMAND.....................................................................................................................7 SECTION I: HIGH TEMPERATURES AND ELECTRICITY DEMAND ..........................9 BACKGROUND

  12. Capacity Markets for Electricity

    E-Print Network [OSTI]

    Creti, Anna; Fabra, Natalia

    2004-01-01

    England and Wales Electricity Market”, Power Working PaperFelder (1996), “Should Electricity Markets Have a Capacityand Competitive Electricity Markets”, mimeo, IDEI, available

  13. Capacity Markets for Electricity

    E-Print Network [OSTI]

    Creti, Anna; Fabra, Natalia

    2004-01-01

    and design of electricity capacity markets. Our work has twoMarkets for Electricity capacity markets, and so, when thesemain features of electricity capacity markets. We have used

  14. Retail Electricity Competition

    E-Print Network [OSTI]

    Joskow, Paul; Tirole, Jean

    2004-01-01

    Reliability and Competitive Electricity Markets” mimeo, MITCSEM WP 130 Retail Electricity Competition * Paul Joskow andwww.ucei.org Retail Electricity Competition ? Paul Joskow †

  15. Designing Electricity Auctions

    E-Print Network [OSTI]

    Fabra, Natalia; von der Fehr, Nils-Henrik; Harbord, David

    2004-01-01

    market performance in electricity auctions, it appears thatMcSorely (2001) “Regulating Electricity Markets: Experiencethe United Kingdom,” The Electricity Journal, December, 81-

  16. Electrical Safety

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based|DepartmentStatementofApril 25,EVtheEnergyPreparedElectricalNOT

  17. Micro Laser Personal Projector Wilfrido Sierra Hernandez

    E-Print Network [OSTI]

    Bove Jr., V. Michael

    Micro Laser Personal Projector by Wilfrido Sierra Hern´andez Submitted to the Program in Media Arts by . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Andrew B. Lippman Chairman, Department Committee on Graduate Students #12;2 #12;Micro Laser Personal Laser Personal Projector by Wilfrido Sierra Hern´andez Submitted to the Program in Media Arts

  18. Laser MicroChemical Shaping of Silicon

    E-Print Network [OSTI]

    Burns, Michael J.

    Laser MicroChemical Shaping of Silicon MURI Workshop Feb 28, 2005 Michael J. Burns, Ph.D. LMC Product Manager #12;FEI Copyright © 2005 Vectra LMC 9900 2 Laser Micro Chemical (LMC) ·Use of laser light to induce local chemical reactions. ·Both Laser Chemical Etching (LCE) and Laser Chemical Deposition (LCD

  19. Micro Fuel Cells Direct Methanol Fuel Cells

    E-Print Network [OSTI]

    Micro Fuel Cells TM Direct Methanol Fuel Cells for Portable Power A Fuel Cell System Developer-17, 2002 Phoenix, Arizona #12;Micro Fuel Cells Direct Methanol Fuel Cells for Portable Power Outline (1 Energy Content (Wh) Volume(cm^3) Li-Ion Battery DMFC #12;Direct Methanol Fuel Cell Technology

  20. The MicroBooNE Technical Design Report

    E-Print Network [OSTI]

    McDonald, Kirk

    ................................................................................................................20 3 Design Criteria and Parameter TablesThe MicroBooNE Technical Design Report The MicroBooNE Collaboration 2/24/2012 #12;The Micro

  1. A deep high-resolution optical log of dust, ash, and stratigraphy in South Pole glacial ice

    E-Print Network [OSTI]

    Woschnagg, Kurt

    A deep high-resolution optical log of dust, ash, and stratigraphy in South Pole glacial ice N. E (2005), A deep high-resolution optical log of dust, ash, and stratigraphy in South Pole glacial ice

  2. Field examples of electrical resistivity changes during steamflooding

    SciTech Connect (OSTI)

    Mansure, A.J. (Sandia National Lab., Albuquerque, NM (United States)); Meldau, R.F.; Weyland, H.V.

    1993-03-01

    An essential part of using electrical geodiagnostic techniques to map thermal recovery processes is understanding the relationship between the process and the formation resistivity. This paper shows how the relationship used to interpret electrical well logs can be used to understand steamflood resistivity changes. Examples are presented of data from steamfloods in fields with different reservoir characteristics. Included is a typical heavy-oil steamflood (Kern River field) and a steamflood where fresh water is used for the steam generator feedwater (Elk Hills field). Because of differences in reservoir characteristics, changes in resistivity vary from reservoir to reservoir. The information presented include well logs taken before and after steamflooding and petrophysical measurements sufficient to determine the factors that controlled the resistivity changes in each field.

  3. Identifying Complex Fluvial Sandstone Reservoirs Using Core, Well Log, and 3D Seismic Data: Cretaceous Cedar Mountain and Dakota Formations,

    E-Print Network [OSTI]

    Seamons, Kent E.

    core, well-log, and 3D seismic data. The detailed stratigraphy and sedimentology of the interval were

  4. Micro-tensile testing system

    DOE Patents [OSTI]

    Wenski, Edward G.

    2006-01-10

    A micro-tensile testing system providing a stand-alone test platform for testing and reporting physical or engineering properties of test samples of materials having thicknesses of approximately between 0.002 inch and 0.030 inch, including, for example, LiGA engineered materials. The testing system is able to perform a variety of static, dynamic, and cyclic tests. The testing system includes a rigid frame and adjustable gripping supports to minimize measurement errors due to deflection or bending under load; serrated grips for securing the extremely small test sample; high-speed laser scan micrometers for obtaining accurate results; and test software for controlling the testing procedure and reporting results.

  5. Micro-tensile testing system

    DOE Patents [OSTI]

    Wenski, Edward G. (Lenexa, KS)

    2007-07-17

    A micro-tensile testing system providing a stand-alone test platform for testing and reporting physical or engineering properties of test samples of materials having thicknesses of approximately between 0.002 inch and 0.030 inch, including, for example, LiGA engineered materials. The testing system is able to perform a variety of static, dynamic, and cyclic tests. The testing system includes a rigid frame and adjustable gripping supports to minimize measurement errors due to deflection or bending under load; serrated grips for securing the extremely small test sample; high-speed laser scan micrometers for obtaining accurate results; and test software for controlling the testing procedure and reporting results.

  6. Micro-tensile testing system

    DOE Patents [OSTI]

    Wenski, Edward G. (Lenexa, KS)

    2007-08-21

    A micro-tensile testing system providing a stand-alone test platform for testing and reporting physical or engineering properties of test samples of materials having thicknesses of approximately between 0.002 inch and 0.030 inch, including, for example, LiGA engineered materials. The testing system is able to perform a variety of static, dynamic, and cyclic tests. The testing system includes a rigid frame and adjustable gripping supports to minimize measurement errors due to deflection or bending under load; serrated grips for securing the extremely small test sample; high-speed laser scan micrometers for obtaining accurate results; and test software for controlling the testing procedure and reporting results.

  7. Micro-hydropower: status and prospects IT Power Limited, The Manor House, Chineham Court, Luytens Close, Chineham, Hants, UK

    E-Print Network [OSTI]

    Kammen, Daniel M.

    the oceans. It is this solar energy, converted into the latent heat of evaporation of water, that powers the hydrological cycle on which hydro- power depends. Hydro-electricity is usually associated with the buildingMicro-hydropower: status and prospects O Paish IT Power Limited, The Manor House, Chineham Court

  8. Thermal properties of the hybrid graphene-metal nano-micro-composites: Applications in thermal interface materials

    E-Print Network [OSTI]

    Thermal properties of the hybrid graphene-metal nano-micro-composites: Applications in thermal) The authors report on synthesis and thermal properties of the electrically conductive thermal interface materials with the hybrid graphene-metal particle fillers. The thermal conductivity of resulting composites

  9. Renewable Electricity Futures Study

    E-Print Network [OSTI]

    Renewable Electricity Futures Study Renewable Electricity Generation and Storage Technologies for Sustainable Energy, LLC. #12;Renewable Electricity Futures Study Edited By Hand, M.M. National Renewable;Suggested Citations Renewable Electricity Futures Study (Entire Report) National Renewable Energy Laboratory

  10. ELECTRICAL ENGINEERING EECS Department

    E-Print Network [OSTI]

    ELECTRICAL ENGINEERING EECS Department The Electrical Engineering and Computer Science (EECS) Department at WSU offers undergraduate degrees in electrical engineering, computer engineering and computer science. The EECS Department offers master of science degrees in computer science, electrical engineering

  11. Investigation of Micro- and Macro-Scale Transport Processes for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Micro- and Macro-Scale Transport Processes for Improved Fuel Cell Performance Investigation of Micro- and Macro-Scale Transport Processes for Improved Fuel Cell Performance These...

  12. Micro-Earthquake At Roosevelt Hot Springs Geothermal Area (Zandt...

    Open Energy Info (EERE)

    Micro-Earthquake At Roosevelt Hot Springs Geothermal Area (Zandt, Et Al., 1982) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Micro-Earthquake...

  13. Grain Boundary (GB) Studies in Nano- and Micro- Crystalline Materials

    E-Print Network [OSTI]

    Tanju, Mst Sohanazaman

    2011-01-01

    in Nano- and Micro- Crystalline Materials A Dissertationdense nano and micron crystalline materials were measuredStudies in Nano- and Micro- Crystalline Materials by Mst.

  14. Characterizing Fractures in the Geysers Geothermal Field by Micro...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Geothermal Field by Micro-seismic Data, Using Soft Computing, Fractals, and Shear Wave Anisotropy Characterizing Fractures in the Geysers Geothermal Field by Micro-seismic...

  15. Electrical receptacle

    DOE Patents [OSTI]

    Leong, R.

    1993-06-22

    The invention is a receptacle for a three prong electrical plug which has either a tubular or U-shaped grounding prong. The inventive receptacle has a grounding prong socket which is sufficiently spacious to prevent the socket from significantly stretching when a larger, U-shaped grounding prong is inserted into the socket, and having two ridges to allow a snug fit when a smaller tubular shape grounding prong is inserted into the socket. The two ridges are made to prevent the socket from expanding when either the U-shaped grounding prong or the tubular grounding prong is inserted.

  16. In cooperation with the University of Waterloo, Canada Application of Advanced Geophysical Logging Methods

    E-Print Network [OSTI]

    Singha, Kamini

    .S. Geological Survey #12;2 Figure 1. Location of Rocketdyne Santa Susana Field Laboratory and logged boreholes sandstone and mudstone at the Rocketdyne Santa Susana Field ,, in southern Ventura County, California (fig

  17. A comparison of logging while drilling (LWD) and wireline acoustic measurements

    E-Print Network [OSTI]

    Briggs, Victoria Alice, 1974-

    2006-01-01

    The instruments used to measure borehole acoustic data can be classified as either wireline or logging while drilling (LWD). The wireline tool measures formation speeds after the borehole is drilled, and the LWD tool ...

  18. Elimination of LWD (Logging-While-Drilling) Tool Modes Using Seismoelectric Data

    E-Print Network [OSTI]

    Zhan, Xin

    2006-01-01

    Borehole acoustic logging-while-drilling (LWD) for formation evaluation has become an indispensable part of hydrocarbon reservoir assessment (Tang et al., 2002; Cittá et al., 2004; Esmersoy et al., 2005). However, the ...

  19. A TALE OF TWO (SIMILAR) CITIES: Inferring City Similarity Through Geo-Spatial Query Log Analysis

    E-Print Network [OSTI]

    Cortes, Corinna

    a variety of more in-depth information about households. Advertisers often use the high-level information in the US. In contrast to the Census studies, passive studies of search engine query logs have become common

  20. Integrating User Feedback Log into Relevance Feedback by Coupled SVM for Content-Based Image Retrieval

    E-Print Network [OSTI]

    Lyu, Michael R.

    , the user feedback log is one of the most important resources to bridge the seman- tic gap problem in image to re- peat many rounds of feedback in order to achieve satisfac- tory results. Hence, the learning task

  1. Formation evaluation using wavelet analysis on logs of the Chinji and Nagri Formations, northern Pakistan 

    E-Print Network [OSTI]

    Tanyel, Emre Doruk

    2006-10-30

    The relatively new method of using wavelets in well log analysis is a powerful tool for defining multiple superimposed scales of lithic trends and contacts. Interpreting depositional processes associated with different scales of vertical variation...

  2. Navigation to Important information on Raiderlink/Webraider Portal: Log into Raiderlink/WebRaider Portal

    E-Print Network [OSTI]

    Rock, Chris

    Navigation to Important information on Raiderlink/Webraider Portal: Log into Raiderlink/WebRaider Portal: TTU and TTUSA employees: http://raiderlink.ttu.edu: HSC: http://webraider.ttuhsc.edu: Select TTU

  3. Sonic Logging in Deviated Boreholes in an Anisotropic Formation: Laboratory Study

    E-Print Network [OSTI]

    Zhu, Zhenya

    2006-01-01

    Deepwater field development requires drilling of deviated or horizontal wells. Most formations encountered can be highly anisotropic and P- and S-wave velocities vary with propagation directions. Sonic logs acquired in ...

  4. Temperatures and Natural Gamma-Ray Logs Obtained in 1986 from...

    Open Energy Info (EERE)

    and following drilling and possibly to ground shaking associated with present and past seismic activity in the Long Valley region.Natural gamma-ray logs obtained on four...

  5. High-energy photon transport modeling for oil-well logging

    E-Print Network [OSTI]

    Johnson, Erik D., Ph. D. Massachusetts Institute of Technology

    2009-01-01

    Nuclear oil well logging tools utilizing radioisotope sources of photons are used ubiquitously in oilfields throughout the world. Because of safety and security concerns, there is renewed interest in shifting to ...

  6. FrogLog 21 (3), Number 107 (July 2013) | 1 Survival Alliance

    E-Print Network [OSTI]

    Andreone, Franco

    FrogLog 21 (3), Number 107 (July 2013) | 1 Amphibian Survival Alliance Website Urban Amphibians and The Environment. Plant nursery and water quality Fifteen hundred essential oil plants belonging to the species

  7. Annual Logging Symposium, May 14-18, 2011 QUANTIFYING WETTABILITY ALTERATION DURING OIL-BASE

    E-Print Network [OSTI]

    Torres-Verdín, Carlos

    by the Society of Petrophysicists and Well Log Analysts (SPWLA) and the submitting authors. This paper and efficiency of drilling, reduce borehole washouts, achieve better borehole control, and minimize the swelling

  8. Precise inversion of logged slownesses for elastic parameters in a gas shale formation

    E-Print Network [OSTI]

    Miller, Douglas E.

    Dipole sonic log data recorded in a vertical pilot well and the associated production well are analyzed over a 200×1100-ft section of a North American gas shale formation. The combination of these two wells enables angular ...

  9. Technical memorandum on analysis of the EU ETS using the community independent transaction log

    E-Print Network [OSTI]

    McGuinness, Meghan

    2007-01-01

    This memorandum provides an overview of three deficiencies within the current presentation of the Community Independent Transaction Log (CITL) data that have implications for researchers' ability to accurately analyze the ...

  10. Field Test of a Low-Frequency Sparker Source for Acoustic Waveform Logging

    E-Print Network [OSTI]

    Paillet, Frederick L.

    1984-01-01

    Low-frequency acoustic-energy sources for waveform logging have important applications in: 1) Verifying theoretical calculations; 2) generating tube waves in large-diameter boreholes; and 3) providing larger sample volumes ...

  11. Full Waveform Acoustic Logging - Where We Are, Where We Are Going

    E-Print Network [OSTI]

    Toksoz, M. Nafi

    1984-01-01

    We have now completed the second year of the Full Waveform Acoustic Logging Consortium. During these two years, we have developed a good understanding of seismic wave propagation in a borehole through both theoretical ...

  12. Reduced impact logging minimally alters tropical rainforest carbon and energy exchange

    E-Print Network [OSTI]

    2011-01-01

    Brazil | Amazon | land use | micrometeorology D eforestation in the tropics affects the land–atmosphere ex- change of trace gases and energyand energy (W·m ?2 ) ?uxes, calculated as (? = logged ? unlogged), in Tapajos National Forest, Para, Brazil.

  13. deep highresolution optical log dust, ash, and stratigraphy South Pole glacial

    E-Print Network [OSTI]

    Woschnagg, Kurt

    deep high­resolution optical log dust, ash, and stratigraphy South Pole glacial Bramall, Bay, Rohde, Price (2005), high­resolution optical dust, stratigraphy South Pole glacial Geophys. Res. Lett

  14. Smart Energy Management and Control for Fuel Cell Based Micro-Grid Connected Neighborhoods

    SciTech Connect (OSTI)

    Dr. Mohammad S. Alam

    2006-03-15

    Fuel cell power generation promises to be an efficient, pollution-free, reliable power source in both large scale and small scale, remote applications. DOE formed the Solid State Energy Conversion Alliance with the intention of breaking one of the last barriers remaining for cost effective fuel cell power generation. The Alliance’s goal is to produce a core solid-state fuel cell module at a cost of no more than $400 per kilowatt and ready for commercial application by 2010. With their inherently high, 60-70% conversion efficiencies, significantly reduced carbon dioxide emissions, and negligible emissions of other pollutants, fuel cells will be the obvious choice for a broad variety of commercial and residential applications when their cost effectiveness is improved. In a research program funded by the Department of Energy, the research team has been investigating smart fuel cell-operated residential micro-grid communities. This research has focused on using smart control systems in conjunction with fuel cell power plants, with the goal to reduce energy consumption, reduce demand peaks and still meet the energy requirements of any household in a micro-grid community environment. In Phases I and II, a SEMaC was developed and extended to a micro-grid community. In addition, an optimal configuration was determined for a single fuel cell power plant supplying power to a ten-home micro-grid community. In Phase III, the plan is to expand this work to fuel cell based micro-grid connected neighborhoods (mini-grid). The economic implications of hydrogen cogeneration will be investigated. These efforts are consistent with DOE’s mission to decentralize domestic electric power generation and to accelerate the onset of the hydrogen economy. A major challenge facing the routine implementation and use of a fuel cell based mini-grid is the varying electrical demand of the individual micro-grids, and, therefore, analyzing these issues is vital. Efforts are needed to determine the most appropriate means of implementing micro-grids and the costs and processes involved with their extended operation. With the development and availability of fuel cell based stand-alone power plants, an electrical mini-grid, encompassing several connected residential neighborhoods, has become a viable concept. A primary objective of this project is to define the parameters of an economically efficient fuel cell based mini-grid. Since pure hydrogen is not economically available in sufficient quantities at the present time, the use of reforming technology to produce and store excess hydrogen will also be investigated. From a broader perspective, the factors that bear upon the feasibility of fuel cell based micro-grid connected neighborhoods are similar to those pertaining to the electrification of a small town with a localized power generating station containing several conventional generating units. In the conventional case, the town or locality would also be connected to the larger grid system of the utility company. Therefore, in the case of the fuel cell based micro-grid connected neighborhoods, this option should also be available. The objectives of this research project are: To demonstrate that smart energy management of a fuel cell based micro-grid connected neighborhood can be efficient and cost-effective;To define the most economical micro-grid configuration; and, To determine how residential micro-grid connected fuel cell(s) can contribute to America's hydrogen energy future.

  15. Electric field controlled emulsion phase contactor

    DOE Patents [OSTI]

    Scott, Timothy C. (Knoxville, TN)

    1995-01-01

    A system for contacting liquid phases comprising a column for transporting a liquid phase contacting system, the column having upper and lower regions. The upper region has a nozzle for introducing a dispersed phase and means for applying thereto a vertically oriented high intensity pulsed electric field. This electric field allows improved flow rates while shattering the dispersed phase into many micro-droplets upon exiting the nozzle to form a dispersion within a continuous phase. The lower region employs means for applying to the dispersed phase a horizontally oriented high intensity pulsed electric field so that the dispersed phase undergoes continuous coalescence and redispersion while being urged from side to side as it progresses through the system, increasing greatly the mass transfer opportunity.

  16. Electric field controlled emulsion phase contactor

    DOE Patents [OSTI]

    Scott, T.C.

    1995-01-31

    A system is described for contacting liquid phases comprising a column for transporting a liquid phase contacting system, the column having upper and lower regions. The upper region has a nozzle for introducing a dispersed phase and means for applying thereto a vertically oriented high intensity pulsed electric field. This electric field allows improved flow rates while shattering the dispersed phase into many micro-droplets upon exiting the nozzle to form a dispersion within a continuous phase. The lower region employs means for applying to the dispersed phase a horizontally oriented high intensity pulsed electric field so that the dispersed phase undergoes continuous coalescence and redispersion while being urged from side to side as it progresses through the system, increasing greatly the mass transfer opportunity. 5 figs.

  17. Hybrid opto-electric manipulation in microfluidics - opportunities and challenges

    SciTech Connect (OSTI)

    Kumar, Aloke [ORNL; Williams, Stuart J. [University of Louisville, Louisville; Chuang, Han-sheng [University of Pennsylvania; Green, Nicolas [University of Southampton, England; Wereley, Steven G. [Purdue University

    2011-01-01

    Hybrid opto-electric manipulation in microfluidics/nanofluidics refers to a set of technologies that employ both optical and electrical forces to achieve particle or fluid manipulation at the micro and nano scale. These technologies, which have emerged primarily over the last decade, have provided a revolutionary and fresh perspective at fundamental electrokinetic processes, as well as have engendered a novel applications and devices. Hybrid opto-electric techniques have been utilized to manipulate objects ranging in diversity from millimeter-sized droplets to nano-particles. This review article discusses the underlying principles, applications and future perspectives of various techniques that have emerged over the last decade under a unified umbrella.

  18. Results of investigations at the Zunil geothermal field, Guatemala: Well logging and brine geochemistry

    SciTech Connect (OSTI)

    Adams, A.; Dennis, B.; Van Eeckhout, E.; Goff, F.; Lawton, R.; Trujillo, P.E.; Counce, D.; Archuleta, J. (Los Alamos National Lab., NM (USA)); Medina, V. (Instituto Nacional de Electrificacion, Guatemala City (Guatemala). Unidad de Desarollo Geotermico)

    1991-07-01

    The well logging team from Los Alamos and its counterpart from Central America were tasked to investigate the condition of four producing geothermal wells in the Zunil Geothermal Field. The information obtained would be used to help evaluate the Zunil geothermal reservoir in terms of possible additional drilling and future power plant design. The field activities focused on downhole measurements in four production wells (ZCQ-3, ZCQ-4, ZCQ-5, and ZCQ-6). The teams took measurements of the wells in both static (shut-in) and flowing conditions, using the high-temperature well logging tools developed at Los Alamos National Laboratory. Two well logging missions were conducted in the Zunil field. In October 1988 measurements were made in well ZCQ-3, ZCQ-5, and ZCQ-6. In December 1989 the second field operation logged ZCQ-4 and repeated logs in ZCQ-3. Both field operations included not only well logging but the collecting of numerous fluid samples from both thermal and nonthermal waters. 18 refs., 22 figs., 7 tabs.

  19. Electrokinetic micro-fluid mixer

    DOE Patents [OSTI]

    Paul, Phillip H. (Livermore, CA); Rakestraw, David J. (Fremont, CA)

    2000-01-01

    A method and apparatus for efficiently and rapidly mixing liquids in a system operating in the creeping flow regime such as would be encountered in capillary-based systems. By applying an electric field to each liquid, the present invention is capable of mixing together fluid streams in capillary-based systems, where mechanical or turbulent stirring cannot be used, to produce a homogeneous liquid.

  20. Understanding batteries on the micro- and nanometer scale

    ScienceCinema (OSTI)

    None

    2014-06-03

    In order to understand performance limitations and failure mechanisms of batteries, one has to investigate processes on the micro- and nanometer scale. A typical failure mechanism in lithium metal batteries is dendritic growth. During discharge, lithium is stripped of the anode surface and migrates to the cathode. During charge, lithium is deposited back on the anode. Repeated cycling can result in stripping and re-deposition that roughens the surface. The roughening of the surface changes the electric field and draws more metal to spikes that are beginning to grow. These can grow with tremendous mechanical force, puncture the separator, and directly connect the anode with the cathode which can create an internal short circuit. This can lead to an uncontrolled discharge reaction, which heats the cell and causes additional exothermic reactions leading to what is called thermal runaway. ORNL has developed a new technology called liquid electron microscopy. In a specially designed sample holder micro-chamber with electron-transparent windows, researchers can hold a liquid and take images of structures and particles at nanometer size. It's the first microscope holder of its kind used to investigate the inside of a battery while cycled.

  1. Understanding batteries on the micro- and nanometer scale

    SciTech Connect (OSTI)

    None

    2013-07-22

    In order to understand performance limitations and failure mechanisms of batteries, one has to investigate processes on the micro- and nanometer scale. A typical failure mechanism in lithium metal batteries is dendritic growth. During discharge, lithium is stripped of the anode surface and migrates to the cathode. During charge, lithium is deposited back on the anode. Repeated cycling can result in stripping and re-deposition that roughens the surface. The roughening of the surface changes the electric field and draws more metal to spikes that are beginning to grow. These can grow with tremendous mechanical force, puncture the separator, and directly connect the anode with the cathode which can create an internal short circuit. This can lead to an uncontrolled discharge reaction, which heats the cell and causes additional exothermic reactions leading to what is called thermal runaway. ORNL has developed a new technology called liquid electron microscopy. In a specially designed sample holder micro-chamber with electron-transparent windows, researchers can hold a liquid and take images of structures and particles at nanometer size. It's the first microscope holder of its kind used to investigate the inside of a battery while cycled.

  2. Business Case for a Micro-Combined Heat and Power Fuel Cell System in Commercial Applications

    SciTech Connect (OSTI)

    Brooks, Kriston P.; Makhmalbaf, Atefe; Anderson, David M.; Amaya, Jodi P.; Pilli, Siva Prasad; Srivastava, Viraj; Upton, Jaki F.

    2013-10-30

    Combined heat and power fuel cell systems (CHP-FCSs) provide consistent electrical power and hot water with greater efficiency and lower emissions than alternative sources. These systems can be used either as baseload, grid-connected, or as off-the-grid power sources. This report presents a business case for CHP-FCSs in the range of 5 to 50 kWe. Systems in this power range are considered micro-CHP-FCS. For this particular business case, commercial applications rather than residential or industrial are targeted. To understand the benefits of implementing a micro-CHP-FCS, the characteristics that determine their competitive advantage must first be identified. Locations with high electricity prices and low natural gas prices are ideal locations for micro-CHP-FCSs. Fortunately, these high spark spread locations are generally in the northeastern area of the United States and California where government incentives are already in place to offset the current high cost of the micro-CHP-FCSs. As a result of the inherently high efficiency of a fuel cell and their ability to use the waste heat that is generated as a CHP, they have higher efficiency. This results in lower fuel costs than comparable alternative small-scale power systems (e.g., microturbines and reciprocating engines). A variety of markets should consider micro-CHP-FCSs including those that require both heat and baseload electricity throughout the year. In addition, the reliable power of micro-CHP-FCSs could be beneficial to markets where electrical outages are especially frequent or costly. Greenhouse gas emission levels from micro-CHP-FCSs are 69 percent lower, and the human health costs are 99.9 percent lower, than those attributed to conventional coal-fired power plants. As a result, FCSs can allow a company to advertise as environmentally conscious and provide a bottom-line sales advantage. As a new technology in the early stages of adoption, micro-CHP-FCSs are currently more expensive than alternative technologies. As the technology gains a foothold in its target markets and demand increases, the costs will decline in response to improved manufacturing efficiencies, similar to trends seen with other technologies. Transparency Market Research forecasts suggest that the CHP-FCS market will grow at a compound annual growth rate of greater than 27 percent over the next 5 years. These production level increases, coupled with the expected low price of natural gas, indicate the economic payback period will move to less than 5 years over the course of the next 5 years. To better understand the benefits of micro-CHP-FCSs, The U.S. Department of Energy worked with ClearEdge Power to install fifteen 5-kWe fuel cells in the commercial markets of California and Oregon. Pacific Northwest National Laboratory is evaluating these systems in terms of economics, operations, and their environmental impact in real-world applications. As expected, the economic analysis has indicated that the high capital cost of the micro-CHP-FCSs results in a longer payback period than typically is acceptable for all but early-adopter market segments. However, a payback period of less than 3 years may be expected as increased production brings system cost down, and CHP incentives are maintained or improved.

  3. Printed electronics and micro-electromechanical systems

    E-Print Network [OSTI]

    Wilhelm, Eric Jamesson, 1977-

    2004-01-01

    Current electronics and micro-electromechanical systems (MEMS) manufacture is optimized for the production of very high-volume parts on a limited range of substrates. These processes are long, consume large amounts of ...

  4. Dropwise Condensation on Micro- and Nanostructured Surfaces

    E-Print Network [OSTI]

    Miljkovic, Nenad

    In this review we cover recent developments in the area of surface- enhanced dropwise condensation against the background of earlier work. The development of fabrication techniques to create surface structures at the micro- ...

  5. Micro benchtop optics by bulk silicon micromachining

    DOE Patents [OSTI]

    Lee, Abraham P. (Walnut Creek, CA); Pocha, Michael D. (Livermore, CA); McConaghy, Charles F. (Livermore, CA); Deri, Robert J. (Pleasanton, CA)

    2000-01-01

    Micromachining of bulk silicon utilizing the parallel etching characteristics of bulk silicon and integrating the parallel etch planes of silicon with silicon wafer bonding and impurity doping, enables the fabrication of on-chip optics with in situ aligned etched grooves for optical fibers, micro-lenses, photodiodes, and laser diodes. Other optical components that can be microfabricated and integrated include semi-transparent beam splitters, micro-optical scanners, pinholes, optical gratings, micro-optical filters, etc. Micromachining of bulk silicon utilizing the parallel etching characteristics thereof can be utilized to develop miniaturization of bio-instrumentation such as wavelength monitoring by fluorescence spectrometers, and other miniaturized optical systems such as Fabry-Perot interferometry for filtering of wavelengths, tunable cavity lasers, micro-holography modules, and wavelength splitters for optical communication systems.

  6. Evolutionary analysis of animal microRNAs

    E-Print Network [OSTI]

    Guerra Martins dos Santos Assunção, José Afonso

    2013-01-08

    In recent years, microRNAs (miRNAs) have been recognised as important genetic regulators of gene expression in Animals and Plants. They can potentially target a large fraction of the cellular transcriptome, having been shown to be important...

  7. Diet, MicroRNAs and Prostate Cancer

    E-Print Network [OSTI]

    Saini, Sharanjot; Majid, Shahana; Dahiya, Rajvir

    2010-01-01

    deregulation in human cancer. Cell Cycle. 2008;7:2643–6. 25.genomic regions involved in cancers. Proc Natl Acad Sci USA.A, Jacks T. MicroRNAs and cancer: short RNAs go a long way.

  8. Automated micro-tracking planar solar concentrators

    E-Print Network [OSTI]

    Hallas, Justin Matthew

    2011-01-01

    PV cell behind each lens tracking the sun with only lateralclimbing required for tracking the sun, and experimentalin a fixed frame tracking the sun with only micro-tracking.

  9. Micro windmills to recharge your mobile phone

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    interest from Taiwanese Oven Fresh Latest Updates Downloads Become a member, today! Login with Facebook or installed anywhere,41yrs Small MILL-Lathe-Drill Solar Water Well Pumps Siemens Wind Energy Page 3 of 4Micro

  10. Heuristic Algorithm for Coordinating Smart Houses in MicroGrid.

    E-Print Network [OSTI]

    Zito, Michele

    Heuristic Algorithm for Coordinating Smart Houses in MicroGrid. Mohamed Arikiez 1 , Floriana Grasso connected in a micro- grid configuration. The micro-grid consists of houses and local renewable plants, each, power generation, and smart appliances [4]. Smart micro-grids [5] can be defined as a set of houses

  11. Micro-blogging as Online Word of Mouth Branding

    E-Print Network [OSTI]

    Jansen, James

    Micro-blogging as Online Word of Mouth Branding Abstract In this paper, we report research results investigating micro-blogging as a form of online word of mouth branding. We analyzed 149,472 micro-blog postings containing branding comments, sentiments, and opinions. We investigated the overall structure of these micro-blog

  12. Micro Windmills to Recharge Cell Leave a reply

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    Micro Windmills to Recharge Cell Phones Leave a reply The Windmill in Action At the University of Texas Arlington, scientists J.C. Chiao and Smitha Rao have developed micro-windmills which recharge Page 1 of 2Micro Windmills to Recharge Cell Phones | MADE 2/3/2014http://themadeblog.com/micro-windmills

  13. MicroBooNE Detector Move

    ScienceCinema (OSTI)

    Flemming, Bonnie; Rameika, Gina

    2014-07-15

    On Monday, June 23, 2014 the MicroBooNE detector -- a 30-ton vessel that will be used to study ghostly particles called neutrinos -- was transported three miles across the Fermilab site and gently lowered into the laboratory's Liquid-Argon Test Facility. This video documents that move, some taken with time-lapse camerad, and shows the process of getting the MicroBooNE detector to its new home.

  14. Micro electromechanical systems (MEMS) for mechanical engineers

    SciTech Connect (OSTI)

    Lee, A. P., LLNL

    1996-11-18

    The ongoing advances in Microelectromechanical Systems (MEMS) are providing man-kind the freedom to travel to dimensional spaces never before conceivable. Advances include new fabrication processes, new materials, tailored modeling tools, new fabrication machines, systems integration, and more detailed studies of physics and surface chemistry as applied to the micro scale. In the ten years since its inauguration, MEMS technology is penetrating industries of automobile, healthcare, biotechnology, sports/entertainment, measurement systems, data storage, photonics/optics, computer, aerospace, precision instruments/robotics, and environment monitoring. It is projected that by the turn of the century, MEMS will impact every individual in the industrial world, totaling sales up to $14 billion (source: System Planning Corp.). MEMS programs in major universities have spawned up all over the United States, preparing the brain-power and expertise for the next wave of MEMS breakthroughs. It should be pointed out that although MEMS has been initiated by electrical engineering researchers through the involvement of IC fabrication techniques, today it has evolved such that it requires a totally multi-disciplinary team to develop useful devices. Mechanical engineers are especially crucial to the success of MEMS development, since 90% of the physical realm involved is mechanical. Mechanical engineers are needed for the design of MEMS, the analysis of the mechanical system, the design of testing apparatus, the implementation of analytical tools, and the packaging process. Every single aspect of mechanical engineering is being utilized in the MEMS field today, however, the impact could be more substantial if more mechanical engineers are involved in the systems level designing. In this paper, an attempt is made to create the pathways for a mechanical engineer to enter in the MEMS field. Examples of application in optics and medical devices will be used to illustrate how mechanical engineers made impact. Through a basic understanding of the history of MEMS, the background physics and scaling in micromechanical systems, and an introduction to baseline MEMS processes, a mechanical engineer should be well on his way to Alice's wonderland in the ever-exciting playground of MEMS.

  15. 1/17/2014 micro-windmills | Layman's Terms Media http://laymanstermsmedia.com/tag/micro-windmills/ 1/3

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    1/17/2014 micro-windmills | Layman's Terms Media http://laymanstermsmedia.com/tag/micro-windmills/ 1/3 (http://laymanstermsmediadotcom.files.wordpress.com/2014/01/67108_web.jpg) A micro-windmill is pictured on the face of a penny. Photo courtesy of UT Arlington Tag Archives: micro-windmills New device

  16. An electrical resistivity logging study of the marine sediments at the offshore dredge disposal site, Galveston, Texas 

    E-Print Network [OSTI]

    Hill, Gerhard William

    1976-01-01

    of clay minerals in samples of similar 34 80 60 % KAOLINITE 40 0 0 FORMATION FACTOR=- Ro Rw Figure 8. Variation of 5 kaolinite of total clay X with formation factor at 3. 3'C. l00 80 % II. LITE 60 40 20 FORMATION FACTOR = R Rw Figure 9... Channel 14. 067 10. 088 1. 3944 2. 05 67. 34% Sand Silt Clay Buoy 8 Study Area Ro = Res i sti vi ty of Formati on Rw = Resistivity of 'k'ater F = ? = Formation Factor Ro Rw . 62? 1 e = ( ? ' )m = Porosity F m = Shape Factor TABLE 3. BASELINE...

  17. University of Strathclyde Dpt of Electric Electrical Engineering...

    Open Energy Info (EERE)

    Strathclyde Dpt of Electric Electrical Engineering Institute for Energy and Enviro Jump to: navigation, search Name: University of Strathclyde, Dpt of Electric & Electrical...

  18. Electrical Generation for More-Electric Aircraft using Solid...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electrical Generation for More-Electric Aircraft using Solid Oxide Fuel Cells Electrical Generation for More-Electric Aircraft using Solid Oxide Fuel Cells This study, completed by...

  19. Estimating the Value of Electricity Storage Resources in Electricity...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Value of Electricity Storage Resources in Electricity Markets - EAC 2011 Estimating the Value of Electricity Storage Resources in Electricity Markets - EAC 2011 The purpose of this...

  20. Response transforms from comparative study of commercial pulsed-neutron-capture logging systems

    SciTech Connect (OSTI)

    Salaita, G.N. (Chevron Oil Field Research Co., La Habra, CA (United States))

    1992-09-01

    This paper reports that three generations of Schlumberger's Thermal Decay Time (TDT{sup SM}) logging devices - viz., TDT-K, TDT-M, and TDT-P - along with an Atlas Wireline PDK-100{sup SM} system were run in a Saudi Aramco well. The wellbore (8 1/2 in. with 7-in. casing) penetrated a sequence of clean sand, shaly sand, and shale streaks as exhibited by the openhole natural gamma ray log. The initial wellbore fluid was diesel. The fluid was then changed to brines of 42,000 and 176,000 ppm NaCl, respectively. Three repeat passes at a logging speed of 900 ft/hr were obtained by each device for each borehole liquid. As a result of this extensive comparative study, a set of departure curves and mathematical transforms was developed primarily for standardizing the various Schlumberger tools to a common reference logging system and/or borehole environment. The transforms were used beneficially to determine residual oil saturation (ROS) from time-lapse logs in a Saudi Aramco reservoir.

  1. Wells Rural Electric Co | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop IncIowa (Utility Company)Idaho)Vossloh KiepeWebel Micro PowerRural Electric Co

  2. AVTA Federal Fleet PEV Readiness Data Logging and Characterization Study for the National Park Service: Golden Gate National Recreation Area

    SciTech Connect (OSTI)

    Stephen Schey; Jim Francfort

    2014-03-01

    Battelle Energy Alliance, LLC, managing and operating contractor for the U.S. Department of Energy's Idaho National Laboratory, is the lead laboratory for U.S. Department of Energy Advanced Vehicle Testing. Battelle Energy Alliance, LLC contracted with Intertek Testing Services, North America (ITSNA) to collect data on federal fleet operations as part of the Advanced Vehicle Testing Activity's Federal Fleet Vehicle Data Logging and Characterization study. The Advanced Vehicle Testing Activity study seeks to collect data to validate the utilization of advanced electric drive vehicle transportation. This report focuses on the Golden Gate National Recreation Area (GGNRA) fleet to identify daily operational characteristics of select vehicles and report findings on vehicle and mission characterizations to support the successful introduction of plug-in electric vehicles (PEVs) into the agencies' fleets. Individual observations of these selected vehicles provide the basis for recommendations related to electric vehicle adoption and whether a battery electric vehicle or plug-in hybrid electric vehicle (PHEV) (collectively PEVs) can fulfill the mission requirements. GGNRA identified 182 vehicles in its fleet, which are under the management of the U.S. General Services Administration. Fleet vehicle mission categories are defined in Section 4, and while the GGNRA vehicles conduct many different missions, only two (i.e., support and law enforcement missions) were selected by agency management to be part of this fleet evaluation. The selected vehicles included sedans, trucks, and sport-utility vehicles. This report will show that battery electric vehicles and/or PHEVs are capable of performing the required missions and providing an alternative vehicle for support vehicles and PHEVs provide the same for law enforcement, because each has a sufficient range for individual trips and time is available each day for charging to accommodate multiple trips per day. These charging events could occur at the vehicle home base, high-use work areas, or intermediately along routes that the vehicles frequently travel. Replacement of vehicles in the current fleet would result in significant reductions in the emission of greenhouse gases and petroleum use, while also reducing fuel costs. The San Francisco Bay Area is a leader in the adoption of PEVs in the United States. PEV charging stations, or more appropriately identified as electric vehicle supply equipment, located on the GGNRA facility would be a benefit for both GGNRA fleets and general public use. Fleet drivers and park visitors operating privately owned PEVs benefit by using the charging infrastructure. ITSNA recommends location analysis of the GGNRA site to identify the optimal placement of the electric vehicle supply equipment station. ITSNA recognizes the support of Idaho National Laboratory and ICF International for their efforts to initiate communication with the National Parks Service and GGNRA for participation in the study. ITSNA is pleased to provide this report and is encouraged by the high interest and support from the National Park Service and GGNRA personnel.

  3. Reduces electric energy consumption

    E-Print Network [OSTI]

    BENEFITS · Reduces electric energy consumption · Reduces peak electric demand · Reduces natural gas consumption · Reduces nonhazardous solid waste and wastewater generation · Potential annual savings products for the automotive industry, electrical equipment, and miscellaneous other uses nationwide. ALCOA

  4. Superconductivity for Electric Systems

    E-Print Network [OSTI]

    Superconductivity Program Oak Ridge National Laboratory For: Department of Energy Office of Electricity Delivery and Energy Reliability ­ Superconductivity for Electric Systems #12;3 Control Milestones and Status ControlSuperconductivity for Electric Systems Superconductivity Program Quarterly Progress Report

  5. The Micro Craft iSTAR Micro Air Vehicle: Control System Design and Testing

    E-Print Network [OSTI]

    Rotkowitz, Michael C.

    The Micro Craft iSTAR Micro Air Vehicle: Control System Design and Testing Larry Lipera i 2000. This paper describes the vehicle, control system, and ground and flight-test results. Presented at the American Helicopter Society 57th Annual forum, Washington, DC, May 9-11, 2001. Copyright 2001

  6. Detailed balance in micro-and macrokinetics and micro-distinguishability of macro-processes

    E-Print Network [OSTI]

    Detailed balance in micro- and macrokinetics and micro-distinguishability of macro-processes A. N a general framework for the discussion of detailed balance and analyse its microscopic background. We find of detailed balance. Keywords: kinetic equation, random process, microreversibility, detailed balance

  7. Ion Beam Sputter Fabrication of Micro-Grooving and Micro-Threading Tools

    SciTech Connect (OSTI)

    ADAMS,DAVID P.; VASILE,M.J.; KRISHNAN,A.S.M.

    1999-11-05

    This paper presents techniques for fabricating microscopic, nonplanar features in a variety of materials. Micro-grooving and micro-threading tools having cutting dimensions of 10-30{micro}m are made by focused ion beam sputtering and used in ultra-precision machining. Tool fabrication involves directing a 20 keV gallium beam at polished cylindrical punches made of cobalt M42 high-speed steel or C2 tungsten carbide. This creates cutting edges having radii of curvature less than 0.4 {micro}m, and rake features similar to conventional lathe tools. Clearance for minimizing frictional drag of a tool results from the sputter yield dependence on ion herd target incidence angle. Numerically controlled, ultra-precision machining with micro-grooving tools results in a close matching between tool width and feature size. Microtools controllably machine 13 {micro}m wide, 4 {micro}m deep, helical grooves in polymethyl methacrylate and 6061-T6 Al cylindrical substrates. Micro-grooving tools also fabricate sinusoidal waveform features in polished metal substrates.

  8. Micro-Grooving and Micro-Threading Tools for Fabricating Curvilinear Features

    SciTech Connect (OSTI)

    ADAMS,DAVID P.; VASILE,MICHAEL J.; KRISHNAN,A.S.M.

    2000-07-24

    This paper presents techniques for fabricating microscopic, curvilinear features in a variety of workpiece materials. Micro-grooving and micro-threading tools having cutting widths as small as 13 {micro}m are made by focused ion beam sputtering and used for ultra-precision machining. Tool fabrication involves directing a 20 keV gallium beam at polished cylindrical punches made of cobalt M42 high-speed steel or C2 tungsten carbide to create a number of critically aligned facets. Sputtering produces rake facets of desired angle and cutting edges having radii of curvature equal to 0.4 {micro}m. Clearance for minimizing frictional drag of a tool results from a particular ion beam/target geometry that accounts for the sputter yield dependence on incidence angle. It is believed that geometrically specific cutting tools of this dimension have not been made previously. Numerically controlled, ultra-precision machining with micro-grooving tools results in a close match between tool width and feature size. Microtools are used to machine 13 {micro}m wide, 4 {micro}m deep, helical grooves in polymethyl methacrylate and 6061 Al cylindrical workplaces. Micro-grooving tools are also used to fabricate sinusoidal cross-section features in planar metal samples.

  9. LABORATORY II ELECTRIC FIELDS AND ELECTRIC POTENTIALS

    E-Print Network [OSTI]

    Minnesota, University of

    Lab II - 1 LABORATORY II ELECTRIC FIELDS AND ELECTRIC POTENTIALS In this lab you will continue the concepts of field and potential are abstract and difficult to visualize, this laboratory uses a computer and electric potential at any point in space. OBJECTIVES After successfully completing this laboratory, you

  10. Electrical safety guidelines

    SciTech Connect (OSTI)

    Not Available

    1993-09-01

    The Electrical Safety Guidelines prescribes the DOE safety standards for DOE field offices or facilities involved in the use of electrical energy. It has been prepared to provide a uniform set of electrical safety standards and guidance for DOE installations in order to affect a reduction or elimination of risks associated with the use of electrical energy. The objectives of these guidelines are to enhance electrical safety awareness and mitigate electrical hazards to employees, the public, and the environment.

  11. DOE handbook electrical safety

    SciTech Connect (OSTI)

    1998-01-01

    Electrical Safety Handbook presents the Department of Energy (DOE) safety standards for DOE field offices or facilities involved in the use of electrical energy. It has been prepared to provide a uniform set of electrical safety guidance and information for DOE installations to effect a reduction or elimination of risks associated with the use of electrical energy. The objectives of this handbook are to enhance electrical safety awareness and mitigate electrical hazards to employees, the public, and the environment.

  12. Electricity Monthly Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Electric Power Sector comprises electricity-only and combined heat and power (CHP) plants within the North American Industrial Classification System 22 category whose...

  13. California's electricity crisis

    E-Print Network [OSTI]

    Joskow, Paul L.

    2001-01-01

    The collapse of California's electricity restructuring and competition program has attracted attention around the world. Prices in California's competitive wholesale electricity market increased by 500% between the second ...

  14. Edison Electric Institute Update

    Broader source: Energy.gov [DOE]

    Presentation—given at the Fall 2011 Federal Utility Partnership Working Group (FUPWG) meeting—discusses the Edison Electric Institute (EEI) and the current electricity landscape.

  15. Electricity Monthly Update

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    West having a 1.1 percent decrease in electricity generation compared to last February. Electricity generation from coal increased in all regions of the country, with Florida...

  16. Random Walks and Electrical

    E-Print Network [OSTI]

    Jonathon Peterson

    2008-01-30

    Feb 4, 2008 ... Electrical Network Calculations in Random Walks in. Random ... Markov Chains. 2. Electrical Networks and Reversible Markov Chains. 3.

  17. Electricity Monthly Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    End Use: December 2014 Retail ratesprices and consumption In this section, we look at what electricity costs and how much is purchased. Charges for retail electric service are...

  18. Electricity Monthly Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    See all Electricity Reports Electricity Monthly Update With Data for November 2014 | Release Date: Jan. 26, 2015 | Next Release Date: Feb. 24, 2015 Previous Issues Issue:...

  19. ELECTRICAL, COMPUTER, & ENERGY ENGINEERING

    E-Print Network [OSTI]

    Mojzsis, Stephen J.

    ELECTRICAL, COMPUTER, & ENERGY ENGINEERING GRADUATE STUDY GUIDE FALL 2014 ­ SPRING 2015 University of Colorado at Boulder Department of Electrical, Computer & Energy Engineering Graduate Office Campus Box 425

  20. 2012 National Electricity Forum

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. Department of Energy U.S. Department of Energy National Electric Transmission Congestion Study Workshop - December 6, 2011 National Electric Transmission Congestion Study...

  1. Filtrations in Dyson-Schwinger equations: next-to^{j} -leading log expansions systematically

    E-Print Network [OSTI]

    Olaf Krueger; Dirk Kreimer

    2015-02-11

    Dyson-Schwinger equations determine the Green functions $G^r(\\alpha,L)$ in quantum field theory. Their solutions are triangular series in a coupling constant $\\alpha$ and an external scale parameter $L$ for a chosen amplitude $r$, with the order in $L$ bounded by the order in the coupling. Perturbation theory calculates the first few orders in $\\alpha$. On the other hand, Dyson--Schwinger equations determine next-to$^{\\{\\mathrm{j}\\}}$-leading log expansions, $G^r(\\alpha,L) = 1 + \\sum_{j=0}^\\infty \\sum_{\\mathcal{M}} p_j^{\\mathcal{M}}\\alpha^j \\mathcal{M}(u)$. $\\sum_{\\mathcal{M}}$ sums a finite number of functions $\\mathcal{M}$ in $u = \\alpha L/2$. The leading logs come from the trivial representation $\\mathcal{M}(u) = \\begin{bsmallmatrix}\\bullet\\end{bsmallmatrix}(u)$ at $j=0$ with $p_0^{\\begin{bsmallmatrix}\\bullet\\end{bsmallmatrix}} = 1$. All non-leading logs are organized by the suppression in powers $\\alpha^j$. We describe an algebraic method to derive all next-to$^{\\{\\mathrm{j}\\}}$-leading log terms from the knowledge of the first $(j+1)$ terms in perturbation theory and their filtrations. This implies the calculation of the functions $\\mathcal{M}(u)$ and periods $p_j^\\mathcal{M}$. In the first part of our paper, we investigate the structure of Dyson-Schwinger equations and develop a method to filter their solutions. Applying renormalized Feynman rules maps each filtered term to a certain power of $\\alpha$ and $L$ in the log-expansion. Based on this, the second part derives the next-to$^{\\{\\mathrm{j}\\}}$-leading log expansions. Our method is general. Here, we exemplify it using the examples of the propagator in Yukawa theory and the photon self-energy in quantum electrodynamics. The reader may apply our method to any (set of) Dyson-Schwinger equation(s) appearing in renormalizable quantum field theories.

  2. Mississippi State University Cooling, Heating, and Power (Micro-CHP) and Bio-Fuel Center

    SciTech Connect (OSTI)

    Mago, Pedro; Newell, LeLe

    2014-01-31

    Between 2008 and 2014, the U.S. Department of Energy funded the MSU Micro-CHP and Bio-Fuel Center located at Mississippi State University. The overall objective of this project was to enable micro-CHP (micro-combined heat and power) utilization, to facilitate and promote the use of CHP systems and to educate architects, engineers, and agricultural producers and scientists on the benefits of CHP systems. Therefore, the work of the Center focused on the three areas: CHP system modeling and optimization, outreach, and research. In general, the results obtained from this project demonstrated that CHP systems are attractive because they can provide energy, environmental, and economic benefits. Some of these benefits include the potential to reduce operational cost, carbon dioxide emissions, primary energy consumption, and power reliability during electric grid disruptions. The knowledge disseminated in numerous journal and conference papers from the outcomes of this project is beneficial to engineers, architects, agricultural producers, scientists and the public in general who are interested in CHP technology and applications. In addition, more than 48 graduate students and 23 undergraduate students, benefited from the training and research performed in the MSU Micro-CHP and Bio-Fuel Center.

  3. Micro-fabrication Techniques for Target Components

    SciTech Connect (OSTI)

    Miles, R; Hamilton, J; Crawford, J; Ratti, S; Trevino, J; Graff, T; Stockton, C; Harvey, C

    2008-06-10

    Micro-fabrication techniques, derived from the semi-conductor industry, can be used to make a variety of useful mechanical components for targets. A selection of these components including supporting cooling arms for prototype cryogenic inertial confinement fusion targets, stepped and graded density targets for materials dynamics experiments are described. Micro-fabrication enables cost-effective, simultaneous fabrication of multiple high-precision components with complex geometries. Micro-fabrication techniques such as thin-film deposition, photo-lithographic patterning and etch processes normally used in the semi-conductor manufacture industry, can be exploited to make useful mechanical target components. Micro-fabrication processes have in recent years been used to create a number of micro-electro-mechanical systems (MEMS) components such as pressure sensors, accelerometers, ink jet printer heads, microfluidics platforms and the like. These techniques consist primarily of deposition of thin films of material, photo-lithographic patterning and etching processes performed sequentially to produce three dimensional structures using essentially planar processes. While the planar technology can be limiting in terms of the possible geometries of the final product, advantages of using these techniques include the ability to make multiple complex structures simultaneously and cost-effectively. Target components fabricated using these techniques include the supporting cooling arms for cryogenic prototype fusion ignition targets, stepped targets for equation-of-state experiments, and graded density reservoirs for material strength experiments.

  4. Methods for fabricating a micro heat barrier

    DOE Patents [OSTI]

    Marshall, Albert C.; Kravitz, Stanley H.; Tigges, Chris P.; Vawter, Gregory A.

    2004-01-06

    Methods for fabricating a highly effective, micron-scale micro heat barrier structure and process for manufacturing a micro heat barrier based on semiconductor and/or MEMS fabrication techniques. The micro heat barrier has an array of non-metallic, freestanding microsupports with a height less than 100 microns, attached to a substrate. An infrared reflective membrane (e.g., 1 micron gold) can be supported by the array of microsupports to provide radiation shielding. The micro heat barrier can be evacuated to eliminate gas phase heat conduction and convection. Semi-isotropic, reactive ion plasma etching can be used to create a microspike having a cusp-like shape with a sharp, pointed tip (<0.1 micron), to minimize the tip's contact area. A heat source can be placed directly on the microspikes. The micro heat barrier can have an apparent thermal conductivity in the range of 10.sup.-6 to 10.sup.-7 W/m-K. Multiple layers of reflective membranes can be used to increase thermal resistance.

  5. Mechanical vibration to electrical energy converter

    DOE Patents [OSTI]

    Kellogg, Rick Allen (Tijeras, NM); Brotz, Jay Kristoffer (Albuquerque, NM)

    2009-03-03

    Electromechanical devices that generate an electrical signal in response to an external source of mechanical vibrations can operate as a sensor of vibrations and as an energy harvester for converting mechanical vibration to electrical energy. The devices incorporate a magnet that is movable through a gap in a ferromagnetic circuit, wherein a coil is wound around a portion of the ferromagnetic circuit. A flexible coupling is used to attach the magnet to a frame for providing alignment of the magnet as it moves or oscillates through the gap in the ferromagnetic circuit. The motion of the magnet can be constrained to occur within a substantially linear range of magnetostatic force that develops due to the motion of the magnet. The devices can have ferromagnetic circuits with multiple arms, an array of magnets having alternating polarity and, encompass micro-electromechanical (MEM) devices.

  6. Micro-machined thermo-conductivity detector

    DOE Patents [OSTI]

    Yu, Conrad (Antioch, CA)

    2003-01-01

    A micro-machined thermal conductivity detector for a portable gas chromatograph. The detector is highly sensitive and has fast response time to enable detection of the small size gas samples in a portable gas chromatograph which are in the order of nanoliters. The high sensitivity and fast response time are achieved through micro-machined devices composed of a nickel wire, for example, on a silicon nitride window formed in a silicon member and about a millimeter square in size. In addition to operating as a thermal conductivity detector, the silicon nitride window with a micro-machined wire therein of the device can be utilized for a fast response heater for PCR applications.

  7. Anisotropic micro-cloths fabricated from DNA-stabilized carbon nanotubes: one-stop manufacturing with electrode needles

    E-Print Network [OSTI]

    Hiroshi Frusawa; Gen Yoshii

    2015-07-11

    Among a variety of solution-based approaches to fabricate anisotropic films of aligned carbon nanotubes (CNTs), we focus on the dielectrophoretic assembly method using AC electric fields in DNA-stabilized CNT suspensions. We demonstrate that a one-stop manufacturing system using electrode needles can draw anisotropic DNA-CNT hybrid films of 10-100 $\\mu$m in size (i.e., free-standing DNA-CNT micro-cloths) from the remaining suspension into the atmosphere while maintaining structural order. It has been found that a maximal degree of polarization (ca. 40 \\%) can be achieved by micro-cloths fabricated from a variety of DNA-CNT mixtures. Our results suggest that the one-stop method can impart biocompatibility to the downsized CNT films and that the DNA-stabilized CNT micro-cloths directly connected to an electrode could be useful for biofuel cells in terms of electron transfer and/or enzymatic activity.

  8. Micro/nanofabricated environments for synthetic biology

    SciTech Connect (OSTI)

    Collier, Pat [ORNL; Simpson, Michael L [ORNL

    2011-01-01

    A better understanding of how confinement, crowding and reduced dimensionality modulate reactivity and reaction dynamics will aid in the rational and systematic discovery of functionality in complex biological systems. Artificial micro- and nanofabricated structures have helped elucidate the effects of nanoscale spatial confinement and segregation on biological behavior, particularly when integrated with microfluidics, through precise control in both space and time of diffusible signals and binding interactions. Examples of nanostructured interfaces for synthetic biology include the development of cell-like compartments for encapsulating biochemical reactions, nanostructured environments for fundamental studies of diffusion, molecular transport and biochemical reaction kinetics, and regulation of biomolecular interactions as functions of micro- and nanofabricated topological constraints.

  9. Renewable Electricity Futures Study

    E-Print Network [OSTI]

    Renewable Electricity Futures Study Exploration of High-Penetration Renewable Electricity Futures PDF Volume 4 PDF #12;Renewable Electricity Futures Study Edited By Hand, M.M. National Renewable Citations Renewable Electricity Futures Study (Entire Report) National Renewable Energy Laboratory. (2012

  10. Renewable Electricity Futures Study

    E-Print Network [OSTI]

    Renewable Electricity Futures Study Bulk Electric Power Systems: Operations and Transmission by the Alliance for Sustainable Energy, LLC. #12;Renewable Electricity Futures Study Edited By Hand, M.M. National Suggested Citations Renewable Electricity Futures Study (Entire Report) National Renewable Energy Laboratory

  11. Renewable Electricity Futures Study

    E-Print Network [OSTI]

    Renewable Electricity Futures Study End-use Electricity Demand Volume 3 of 4 Volume 2 PDF Volume 3;Renewable Electricity Futures Study Edited By Hand, M.M. National Renewable Energy Laboratory Baldwin, S. U Sandor, D. National Renewable Energy Laboratory Suggested Citations Renewable Electricity Futures Study

  12. ELECTRICAL ENGINEERING Curriculum Notes

    E-Print Network [OSTI]

    Mohan, Chilukuri K.

    ELECTRICAL ENGINEERING Curriculum Notes 2013-2014 1. Electrical Engineering (EE) students must/programs/electrical_engineering) and minors are used to regulate technical electives. A student must complete four technical elective courses in Electrical Engineering or Computer Engineering. At a minimum

  13. Electrical & Computer Engineering

    E-Print Network [OSTI]

    Electrical & Computer Engineering 2014-2015AcademicYearHandbook Doctor of Philosophy in Electrical is for the internal use of the Department of Electrical and Computer Engineering at Carnegie Mellon University only permission of the Department Head of Department of Electrical and Computer Engineering. #12;2 Table

  14. ELECTRICAL & COMPUTER ENGINEERING

    E-Print Network [OSTI]

    ELECTRICAL & COMPUTER ENGINEERING SEMINAR "Agile Sensing Systems: Analysis, Design and Implementation" by Prof. Jun (Jason) Zhang Electrical and Computer Engineering University of Denver Tuesday of Electrical and Computer Engineering at the University of Denver. He was with the School of Electrical

  15. Introduction Computational Efficiency Electricity Portfolio Planning Electricity Portfolios

    E-Print Network [OSTI]

    Introduction Computational Efficiency Electricity Portfolio Planning Electricity Portfolios 2009/11/30­12/01 István Maros Electricity Portfolio #12;Introduction Computational Efficiency Electricity Portfolio Outline 1 Introduction 2 Computational Efficiency 3 Electricity Portfolio Approximate

  16. Fourier sparsity, spectral norm, and the Log-rank conjecture Hing Yin Tsang*

    E-Print Network [OSTI]

    Xie, Ning

    Fourier sparsity, spectral norm, and the Log-rank conjecture Hing Yin Tsang* hytsang@cse.cuhk.edu.hk Abstract--We study Boolean functions with sparse Fourier spectrum or small spectral norm, and show for such functions is exactly the Fourier sparsity of f. Let d = deg2(f) be the F2-degree of f and DCC (f ) stand

  17. Eliciting Motivation Knowledge from Log Files towards Motivation Diagnosis for Adaptive Systems

    E-Print Network [OSTI]

    Cocea, Mihaela

    Eliciting Motivation Knowledge from Log Files towards Motivation Diagnosis for Adaptive Systems, Dublin 1, Ireland {mcocea, sweibelzahl}@ncirl.ie Abstract. Motivation is well-known for its importance a user model of the learner's motivation, especially if integrated with information about knowledge

  18. Annual Logging Symposium, June 21-24, 2009 INVERSION OF SECTOR-BASED LWD DENSITY MEASUREMENTS

    E-Print Network [OSTI]

    Torres-Verdín, Carlos

    SPWLA 50th Annual Logging Symposium, June 21-24, 2009 1 INVERSION OF SECTOR-BASED LWD DENSITY-while-drilling (LWD) density measurements acquired in high-angle and horizontal (HA/HZ) wells. Our interpretation to increasing tool standoff in the upper sectors of the measurement. INTRODUCTION Conventional processing of LWD

  19. Annual Logging Symposium, June 4-7, 2006 ASSESSMENT OF SHOULDER-BED, INVASION, AND LAMINATION

    E-Print Network [OSTI]

    Torres-Verdín, Carlos

    Annual Logging Symposium held in Veracruz, Mexico, June 4-7, 2006. ABSTRACT We quantify the relative effects of shoulder beds, layer thickness, invasion, and sand-shale laminations on monopole and dipole soft and hard formations bounded by shale layers. The thickness of the formation is changed to consider

  20. Freezing Cells Make sure cells are in log phase of growth, ie. subconfluent

    E-Print Network [OSTI]

    Pike, Linda J.

    Freezing Cells Make sure cells are in log phase of growth, ie. subconfluent Protocol 1: 1. Wash cells and trypsinize as usual. 2. Spin down trypsinized cells at 1000 rpm in the tabletop centrifuge 3. Resuspend cells in 0.45 ml standard medium 4. Add 0.45 ml fetal calf serum 5. Add dropwise, 100 µl

  1. East Asian Governments Failing on Illegal Logging as Greenpeace Launches Global Paradise Forests Campaign

    E-Print Network [OSTI]

    East Asian Governments Failing on Illegal Logging as Greenpeace Launches Global Paradise Forests non-violent, creative confrontation to expose global environmental problems, and to force solutions Law Enforcement and Governance (FLEG) to put words into action and take steps to seriously address

  2. Surveys of the Logging Contractor Population 8 Southern States and Maine Cornelis F. de Hoop

    E-Print Network [OSTI]

    10.0 Surveys of the Logging Contractor Population ­ 8 Southern States and Maine by Cornelis F. de. Egan Associate Professor Department of Forest Management University of Maine Orono, ME 04469-5755 W. Thus, surveys of loggers in Maine and in eight southern states were conducted to gain additional

  3. Weekly Security Incident Log Period of Aug 12 -Aug 18, 2013

    E-Print Network [OSTI]

    2013-001248 THOMPSON ROAD Gas leak Security , Toronto Fire, Toronto Police, and Occupational Health and Safety responded to a report of a natural gas leak in the area of the Life Science BuildingWeekly Security Incident Log Period of Aug 12 - Aug 18, 2013 Incident No. Reported Date Building

  4. Weekly Security Incident Log Period of Feb 6 -Feb 12, 2012

    E-Print Network [OSTI]

    Gas leak Security and Toronto Fire responded to a report of a natural gas odour in B-wing. TorontoWeekly Security Incident Log Period of Feb 6 - Feb 12, 2012 Incident No. Reported Date Building\\Const. Security, York Fire Prevention and Toronto Fire responded to a fire alarm. The cause of the alarm

  5. Weekly Security Incident Log Period of Jul 9 -Jul 15, 2012

    E-Print Network [OSTI]

    and Safety responded to a report of a natural gas odour in the building. The building was checked and no natural gas was found. Toronto Fire determined that all was in order. 7/12/2012 07:31 AM HazardousWeekly Security Incident Log Period of Jul 9 - Jul 15, 2012 Incident No. Reported Date Building

  6. Weekly Security Incident Log Period of Apr 29 -May 5, 2013

    E-Print Network [OSTI]

    2013-000845 YORK LANES RETAIL Gas leak Security, Toronto Fire and Enbridge Gas responded to a report of a natural gas odour in the building. The source of the odour was located in a restaurant kitchen. EnbridgeWeekly Security Incident Log Period of Apr 29 - May 5, 2013 Incident No. Reported Date Building

  7. An Approach for Mining Web Service Composition Patterns from Execution Logs

    E-Print Network [OSTI]

    Zou, Ying

    1 An Approach for Mining Web Service Composition Patterns from Execution Logs Ran Tang and Ying Zou.zou}@queensu.ca Abstract-- A service-oriented application is composed of multiple web services to fulfill complex functionality that cannot be provided by individual web service. The combination of services is not random

  8. How do I enroll? 1. Log into WSU's online portal (Academica).

    E-Print Network [OSTI]

    Finley Jr., Russell L.

    How do I enroll? 1. Log into WSU's online portal (Academica). 2 by noon the following business day. 8. Check your account in the online portal in WSU's online portal (Academica). The first payment may include non-deferred fees. What if I add

  9. Parsing the WSJ using CCG and Log-Linear Models Stephen Clark

    E-Print Network [OSTI]

    Curran, James R.

    of Edinburgh 2 Buccleuch Place, Edinburgh, UK stephen.clark@ed.ac.uk James R. Curran School of Information and Steedman, 2002; Hockenmaier, 2003b). In Clark and Curran (2003) we argued for the use of log-linear parsing (Nocedal and Wright, 1999). And finally, we show that the parsing algo- rithm described in Clark and Curran

  10. SPE 159255-PP Rock Classification from Conventional Well Logs in Hydrocarbon-Bearing

    E-Print Network [OSTI]

    Torres-Verdín, Carlos

    SPE 159255-PP Rock Classification from Conventional Well Logs in Hydrocarbon-Bearing Shale Andrew C typing method for application in hydrocarbon-bearing shale (specifically source rock) reservoirs using-hoc correlations where the interpretation becomes a core matching exercise. Scale effects on measurements

  11. ANALYSIS OF PHYSICAL FACTORS AFFECTING ILLEGAL LOGGING OF TROPICAL FOREST OF BERAU, EAST KALIMANTAN, INDONESIA

    E-Print Network [OSTI]

    , INDONESIA USING REMOTE SENSING AND GIS Anita Zaitunah Yousif Ali Hussin Ali Sharifi Department of Natural pollution and storms. The annual deforestation rate in Indonesia was 1.8 million ha between 1985 and 1997 of forests and cutting in unauthorised areas. In Indonesia, there is a smuggling of illegal logs

  12. April 2002 Page 1 of 6 Export credits: Fuelling illegal logging

    E-Print Network [OSTI]

    April 2002 Page 1 of 6 Export credits: Fuelling illegal logging Export Credit Agencies (ECAs are ECAs? Export Credit Agencies and Investment Insurance Agencies, commonly known as ECAs, are public and investment ­ nearly 10 percent of world exports. Longer term loans and guarantees by ECAs increased four

  13. Log-Gamma Polymer Free Energy Fluctuations via a Fredholm Determinant Identity

    E-Print Network [OSTI]

    Borodin, Alexei

    We prove that under n[superscript 1/3] scaling, the limiting distribution as n ? ? of the free energy of Seppalainen’s log-Gamma discrete directed polymer is GUE Tracy-Widom. The main technical innovation we provide is a ...

  14. Oblivious RAM with O((log N)3 ) Worst-Case Cost

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    Oblivious RAM with O((log N)3 ) Worst-Case Cost Elaine Shi PARC/UC Berkeley T-H. Hubert Chan HKU applications. This paper proposes novel O-RAM con- structions that achieves poly-logarithmic worst-case cost in outsourced storage applications. Not surprisingly, the client has to pay a certain cost in order to hide its

  15. Annual Logging Symposium, June 3-6, 2007 COMBINED INVERSION OF BOREHOLE RESISTIVITY AND SONIC

    E-Print Network [OSTI]

    Torres-Verdín, Carlos

    n wS . In other words, resistivity measurements alone can not render separate estimates of w saturation, wS , and porosity, , play important roles in well-log interpretation and formation evaluation for fluid substitution in the study of seismic properties of rocks. Generally, wS is computed using Archie

  16. A Principled Approach to Mining From Noisy Logs Using Heuristics Miner

    E-Print Network [OSTI]

    Tino, Peter

    A Principled Approach to Mining From Noisy Logs Using Heuristics Miner Philip Weber, Behzad Bordbar Miner algorithm, and demonstrate on a simple example. We show that for a given model it is possible in the the robustness of Heuristics Miner to different types of noise. I. INTRODUCTION Process mining is the learning

  17. Log-Domain Circuit Models of Chemical Reactions Soumyajit Mandal and Rahul Sarpeshkar

    E-Print Network [OSTI]

    Sarpeshkar, Rahul

    Log-Domain Circuit Models of Chemical Reactions Soumyajit Mandal and Rahul Sarpeshkar Department to networks of chemical reactions. Our circuits can be used for transient and steady-state simulations the energy barrier of a chemical reaction, exponentially changing its speed. In an analogous fashion, gate

  18. DistributionFree Multivariate Process Control Based On LogLinear Modeling School of Statistics

    E-Print Network [OSTI]

    Qiu, Peihua

    Distribution­Free Multivariate Process Control Based On Log­Linear Modeling Peihua Qiu School the process measurement is multivariate. In the literature, most existing multivariate SPC procedures assume that the in­control distribution of the multivariate process measurement is known and it is a Gaussian

  19. CareLog: A Selective Archiving Tool for Behavior Management in Schools

    E-Print Network [OSTI]

    Hayes, Gillian R.

    to five design principles that governed the development of CareLog. We present results from a five- month]. Such behaviors can disrupt the educational activities for the student with the behavior disorder other disabilities, frequently Autism Spectrum Disorder (ASD) but also Down's Syndrome, Fragile X

  20. Annual Logging Symposium, June 1620, 2012 IMPROVED ASSESSMENT OF IN-SITU FLUID SATURATION WITH

    E-Print Network [OSTI]

    Torres-Verdín, Carlos

    SATURATION WITH MULTI-DIMENSIONAL NMR MEASUREMENTS AND CONVENTIONAL WELL LOGS Kanay Jerath and Carlos Torres saturating fluids. However, often there is ambiguity as to whether fluids appraised with NMR measurements-filtrate invasion, the NMR response of virgin reservoir fluids can be masked by that of mud filtrate. In order

  1. LogStore: Toward Energy-Proportional Storage Servers Wei Zheng Ana Paula Centeno Frederic Chong

    E-Print Network [OSTI]

    Bianchini, Ricardo

    LogStore: Toward Energy-Proportional Storage Servers Wei Zheng Ana Paula Centeno Frederic Chong,anapaula,ricardob}@cs.rutgers.edu chong@cs.ucsb.edu ABSTRACT Storage servers consume significant amounts of energy and are highly non-energy throughput. Categories and Subject Descriptors D.4 [Operating systems]: Storage management Keywords Energy

  2. On the optimal wealth process in a log-normal market

    E-Print Network [OSTI]

    Knopf, Dan

    On the optimal wealth process in a log-normal market: Applications to risk management Phillip Monin and portfolio processes for different utility functions are related through a deter- ministic transformation with respect to the cumulative excess stock return, time, and market parameters. We conclude with a study

  3. Learn from Web Search Logs to Organize Search Results Xuanhui Wang

    E-Print Network [OSTI]

    Zhai, ChengXiang

    and Subject Descriptors: H.3.3 [Informa- tion Search and Retrieval]: Clustering, Search process General TermsLearn from Web Search Logs to Organize Search Results Xuanhui Wang Department of Computer Science Effective organization of search results is critical for improv- ing the utility of any search engine

  4. Upward pressure on timber prices eased as logging conditions improved and lumber &

    E-Print Network [OSTI]

    Upward pressure on timber prices eased as logging conditions improved and lumber & panel prices plummeted back to where they were before the spring run-ups. Overall, timber prices were higher than the prices a year ago. Lumber imports from Canada increased in June due to the temporary re- moval

  5. Small Log Conference Creating Capacity to Compete Coeur d'Alene, Idaho, USA, 1 April 2005

    E-Print Network [OSTI]

    Assessment · UNECE Timber Committee market forecasts · UNECE/FAO Timber Bulletin "Forest products annual Forest Sector Outlook Study · FAO State of the World's Forests, 2005 #12;Small Log Conference ­ Creating countries · Low value · Modern wood energy ­ Small international trade ­ Growing market ­ Policy push

  6. On the possible exceptions for the transcendence of the log-gamma function at rational values and its consequences for the transcendence of $ \\log{\\pi} $ and $ \\pi e $

    E-Print Network [OSTI]

    Lima, F M S

    2009-01-01

    In a recent work published in this journal [JNT \\textbf{129}, 2154 (2009)], it has been argued that the numbers $\\log{\\Gamma(x)} + \\log{\\Gamma(1-x)}$, $x$ being a rational number between 0 and 1, are transcendental with at most \\emph{one} possible exception, but the proof presented there is \\emph{incorrect}. Here in this paper, I point out the mistake committed in that proof and I present a theorem that establishes the transcendence of those numbers, with at most \\emph{two} possible exceptions. This yields a criteria for the algebraicity of $\\log{\\pi}$, a number that presently is not known even to be irrational. I also show that each pair $\\{\\log{[\\pi/\\sin(\\pi x)]}, \\log{[\\pi/\\sin(\\pi y)]}\\}$ contains at least one transcendental number, e.g. $\\{\\log{\\pi}, \\log{(2 \\pi)} \\}$. With respect to this pair, I show that if $ \\log{(k \\pi)}$ is algebraic for some non-zero algebraic $k$ then the product $\\pi e$, another number whose irrationality is not proved, has to be transcendental.

  7. ECE 438 Electric and Hybrid Vehicles Catalog Description: History of electric traction. Introduction to electric and hybrid-electric

    E-Print Network [OSTI]

    ECE 438 ­ Electric and Hybrid Vehicles Catalog Description: History of electric traction. Introduction to electric and hybrid-electric vehicle configurations. Vehicle mechanics. Energy sources and storage. Range prediction. Motor for HEVs. Electric drive components. Vehicle transmission system. Credits

  8. Hybrid opto-electric techniques for molecular diagnostics

    SciTech Connect (OSTI)

    Haque, Aeraj Ul [Argonne National Laboratory (ANL)

    2012-01-01

    Hybrid optoelectric techniques reflect a new paradigm in microfluidics. In essence, these are microfluidic techniques that employ a synergistic combination of optical and electrical forces to enable noninvasive manipulation of fluids and/or particle-type entities at the micro/nano-scale [1]. Synergy between optical and electrical forces bestows these techniques with several unique features that are promising to bring new opportunities in molecular diagnostics. Within the scope of molecular diagnostics, several aspects of optoelectric techniques promise to play a relevant role. These include, but are not limited to, sample preparation, sorting, purification, amplification and detection.

  9. Process window and variation characterization of the micro embossing process

    E-Print Network [OSTI]

    Wang, Qi, S.M. Massachusetts Institute of Technology

    2006-01-01

    The micro embossing process on polymethylmethacrylate (PMMA) is demonstrated experimentally to be a useful process to produce micro fluidic and optical devices. Because this process is a one step thermoplastic deformation ...

  10. Micro-bioreactor design for Chinese hamster ovary cells

    E-Print Network [OSTI]

    Goh, Shireen

    2013-01-01

    The research objective is to design a micro-bioreactor for the culture of Chinese Hamster Ovary (CHO) cells. There is an increasing demand for upstream development in high-throughput micro-bioreactors specifically for the ...

  11. Central Hudson Gas & Electric (Electric) - Residential Energy...

    Broader source: Energy.gov (indexed) [DOE]

    residential electric customers who upgrade heating, cooling or ventilation systems with specific types of energy efficient equipment. These rebates include efficient central air...

  12. Baltimore Gas & Electric Company (Electric) - Residential Energy...

    Broader source: Energy.gov (indexed) [DOE]

    DuctAir sealing Building Insulation Other EE LED Lighting Maximum Rebate Contact Baltimore Gas and Electric Program Info Sector Name Utility Website http:...

  13. MicroReview Bistability in bacteria

    E-Print Network [OSTI]

    Mekalanos, John

    MicroReview Bistability in bacteria David Dubnau1 * and Richard Losick2,3 * 1 Public Health 94720, USA. Summary Gene expression in bacteria is traditionally studied from the average behaviour expression in individual cells reveals, however, that populations of genetically identical bacteria

  14. MicroRNA Regulation of IGF-1 

    E-Print Network [OSTI]

    McEnery, Kayla Anne Filan

    2013-02-04

    an incredible learning experience. Finally, I would like to thank my friends and family for their continuous love and support. 4 ABSTRACT MicroRNA Regulation of IGF. (May 2013) Kayla Anne Filan McEnery Department of Biochemistry & Biophysics Texas A...

  15. MEMS micropump for a Micro Gas Analyzer

    E-Print Network [OSTI]

    Sharma, Vikas, 1979-

    2009-01-01

    This thesis presents a MEMS micro-vacuum pump designed for use in a portable gas analysis system. It is designed to be pneumatically-driven and as such does not have self-contained actuation (the focus of future work). ...

  16. Dumbbell micro-robot driven by flow oscillations

    E-Print Network [OSTI]

    Dumbbell micro-robot driven by flow oscillations By V. A. V l a d i m i r o v Dept of Mathematics-propulsion of a dumbbell micro-robot submerged in a viscous fluid. The micro-robot consists of two rigid spherical beads of each sphere differs from the density of a fluid, while the whole micro-robot has neutral buoyancy

  17. Micro Chemical Vapor Deposition for the Synthesis of Nanomaterials

    E-Print Network [OSTI]

    Zhou, Qin

    2011-01-01

    Deposition," Journal of MicroElectroMechanical Systems, vol.Chair MEMS (Microelectromechanical Systems) technologiesby MEMS (Microelectromechanical Systems) technologies many

  18. Applications of non-imaging micro-optic systems

    E-Print Network [OSTI]

    Baker, Katherine Anne

    2012-01-01

    planar micro-optic solar collectors," Opt. Express 19, A673-A. Rabl. Active Solar Collectors and Their Applications. (

  19. Using Visualizations to Monitor Changes and Harvest Insights from a Global-Scale Logging Infrastructure at Twitter

    E-Print Network [OSTI]

    Daume III, Hal

    on three platforms: strawberry, coconut, and banana. Log events follow a six-level naming hierarchy (client:page:section:component:element:action). Here, we see that the event strawberry:search:personal:-:-:impression in- creased in frequency compared strawberry:inbox:inbox:conversation:-:impression dropped slightly. Abstract-- Logging user activities

  20. Page-Differential Logging: An Efficient and DBMS-Independent Approach for Storing Data into Flash Memory

    E-Print Network [OSTI]

    Whang, Kyu-Young

    Page-Differential Logging: An Efficient and DBMS- Independent Approach for Storing Data into Flash or from log-based ones that keep track of the history of all the changes in a page. Our method allows.e., it is DBMS-independent. Experimental results show that the proposed method is superior in I/O performance

  1. Outline Directed polymers Log-gamma polymer KPZ equation Fluctuation exponents for certain 1+1 dimensional

    E-Print Network [OSTI]

    Seppäläinen, Timo

    Outline Directed polymers Log-gamma polymer KPZ equation Fluctuation exponents for certain 1+1 dimensional directed polymers Timo Sepp¨al¨ainen Department of Mathematics University of Wisconsin-Madison MSRI December 2010 Fluctuation exponents for polymers 1/36 #12;Outline Directed polymers Log

  2. The Role of Micro-Mechanics in Soil Mechanics

    E-Print Network [OSTI]

    Bolton, Malcolm

    The Role of Micro-Mechanics in Soil Mechanics M.D.Bolton CUED/D-Soils/TR313 September 2000;1 The Role of Micro-Mechanics in Soil Mechanics Malcolm Bolton Summary It is suggested that observations of the changing microstructure of soils will permit the selection and refinement of relevant micro-mechanisms

  3. Grid Simulator for Power Quality Assessment of Micro-Grids

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    1 Grid Simulator for Power Quality Assessment of Micro-Grids Joaqu´in Eloy-Garc´iaa , Juan C of the simulator. Finally, a case study is presented by testing a micro-grid. Index Terms Grid Simulator, Power for power quality assessment of micro-grids". Published in IET Power Electronics. doi: 10.1049/iet-pel.2012

  4. Technology uses micro-windmills to recharge cell phones

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    Technology uses micro-windmills to recharge cell phones A micro-windmill is pictured on the face designed a micro-windmill that generates wind energy and may become an innovative solution to cell phone batteries constantly in need of recharging and home energy generation where large windmills

  5. A study of micro fiber dispersion using digital image analysis 

    E-Print Network [OSTI]

    Hendrarsakti, Jooned

    2004-11-15

    of this dissertation is to investigate the use of texture analysis as a tool to micro fiber dispersion measurement. Micro fiber dispersion can be found in many applications such as in paper and industry powder engineering. Three cases related to micro fiber...

  6. Design of a micro-Functional Testing System for process characterization of a hot micro-embossing machine

    E-Print Network [OSTI]

    Thaker, Kunal H. (Kunal Harish)

    2006-01-01

    Growth in industrial, commercial, and medical applications for micro-fluidic devices has fueled heightened research and development into micro-fluidic design, materials, and increasingly manufacturing. Polymers (Poly(methyl ...

  7. Experimental Study on the Demolding Force in Micro Metal Injection Molding

    E-Print Network [OSTI]

    Tor, Shu Beng

    In this paper experimental study on the demolding force needed to eject micro structures in Micro Metal Injection

  8. Electric arc saw apparatus

    DOE Patents [OSTI]

    Deichelbohrer, Paul R [Richland, WA

    1986-01-01

    A portable, hand held electric arc saw has a small frame for supporting an electrically conducting rotary blade which serves as an electrode for generating an electric arc to erode a workpiece. Electric current is supplied to the blade by biased brushes and a slip ring which are mounted in the frame. A pair of freely movable endless belts in the form of crawler treads stretched between two pulleys are used to facilitate movement of the electric arc saw. The pulleys are formed of dielectric material to electrically insulate the crawler treads from the frame.

  9. Log Summarization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesse BergkampCenter (LMI-EFRC)Lodging Lodging Meeting Hotel - Hyatt

  10. Outage Log

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesseworkSURVEYI/O Streams forOrhan Kizilkaya, Ph.D.Our Team Our Team OurOurOut

  11. A Rapid Micro Polymerase Chain Reaction System (GenSpector Micro PCR) for Hepatitis B Virus DNA Detection

    E-Print Network [OSTI]

    Oh, Kwang W.

    A Rapid Micro Polymerase Chain Reaction System (GenSpector® Micro PCR) for Hepatitis B Virus DNA reaction) system (GenSpector® Micro PCR) for the application of Hepatitis B virus (HBV) DNA detection of Hepatitis B virus (HBV) DNA detection [1]. Silicon micromachining technology has been utilized

  12. Assessing Vehicle Electricity Demand Impacts on California Electricity Supply

    E-Print Network [OSTI]

    McCarthy, Ryan W.

    2009-01-01

    CEC (2009) Statewide Electricity Rates by Utility, Class andrates if the marginal electricity rate from the LCFS isestimated marginal electricity emissions rate in California’

  13. Electricity Grid: Impacts of Plug-In Electric Vehicle Charging

    E-Print Network [OSTI]

    Yang, Christopher; McCarthy, Ryan

    2009-01-01

    and timing of vehicle electricity demand. As the number ofcontinually changing electricity demands by using a suite ofif local patterns of electricity demand change significantly

  14. Assessing Vehicle Electricity Demand Impacts on California Electricity Supply

    E-Print Network [OSTI]

    McCarthy, Ryan W.

    2009-01-01

    fuel efficiency and electricity demand assumptions used into added vehicle electricity demand in the BAU (no IGCC)to added vehicle electricity demand in the Mixed technology

  15. Estimating the Value of Electricity Storage Resources in Electricity...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    understanding the role electricity storage resources (storage) can play in wholesale and retail electricity markets, 2) assessing the value of electricity storage in a variety of...

  16. Designing electricity transmission auctions

    E-Print Network [OSTI]

    Greve, Thomas; Pollitt, Michael G.

    2012-10-26

    The UK has ambitious plans for exploiting offshore wind for electricity production in order to meet its challenging target under the EU Renewable Energy Directive. This could involve investing up to 20bn in transmission assets to bring electricity...

  17. Renewable Electricity Futures (Presentation)

    SciTech Connect (OSTI)

    Mai, T.

    2012-10-01

    This presentation library summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050.

  18. Renewable Electricity Futures (Presentation)

    SciTech Connect (OSTI)

    Mai, T.

    2013-04-01

    This presentation summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050.

  19. Renewable Electricity Futures (Presentation)

    SciTech Connect (OSTI)

    Hand, M. M.

    2012-09-01

    This presentation summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050.

  20. Renewable Electricity Futures (Presentation)

    SciTech Connect (OSTI)

    Mai, T.

    2012-11-01

    This presentation summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050.

  1. Massachusetts Electric Vehicle Efforts

    E-Print Network [OSTI]

    California at Davis, University of

    ,500 for full battery electric vehicle (BEV) and $5,000 for plug- in hybrid electric vehicle (PHEV) · Financial 39 Tesla 39 BMW 26 Toyota 7 Honda 3 Cadillac 3 Mitsubishi 2 #12;Department of Public Utilities · DPU

  2. AVTA Federal Fleet PEV Readiness Data Logging and Characterization Study for National Institute of Health

    SciTech Connect (OSTI)

    Schey, Stephen; Francfort, Jim

    2014-11-01

    This report focuses on the National Institute of Health (NIH) fleet to identify daily operational characteristics of select vehicles and report findings on vehicle and mission characterizations to support the successful introduction of plug-in electric vehicles (PEVs) into the agencies’ fleets. Individual observations of these selected vehicles provide the basis for recommendations related to electric vehicle adoption and whether a battery electric vehicle (BEV) or plug-in hybrid electric vehicle (PHEV) (collectively plug-in electric vehicles, or PEVs) can fulfill the mission requirements.

  3. AVTA Federal Fleet PEV Readiness Data Logging and Characterization Study for NASA White Sands Test Facility

    SciTech Connect (OSTI)

    Stephen Schey; Jim Francfort

    2014-10-01

    This report focuses on the NASA White Sands Test Facility (WSTF) fleet to identify daily operational characteristics of select vehicles and report findings on vehicle and mission characterizations to support the successful introduction of plug-in electric vehicles (PEVs) into the agencies’ fleets. Individual observations of these selected vehicles provide the basis for recommendations related to electric vehicle adoption and whether a battery electric vehicle (BEV) or plug-in hybrid electric vehicle (PHEV) (collectively plug-in electric vehicles, or PEVs) can fulfill the mission requirements.

  4. A Uniqueness Result for Minimizers of the 1D Log-gas Renormalized Energy

    E-Print Network [OSTI]

    Thomas Leblé

    2014-08-10

    Sandier and Serfaty studied the one-dimensional Log-gas model, in particular they gave a crystallization result by showing that the one-dimensional lattice $\\mathbb{z}$ is a minimizer for the so-called renormalized energy which they obtained as a limit of the $N$-particle Log-gas Hamiltonian for $N \\to \\infty$. However, this minimizer is not unique among infinite point configurations (for example small perturbations of $\\mathbb{z}$ leave the renormalized energy unchanged). In this paper, we establish that uniqueness holds at the level of (stationary) point processes, the only minimizer being given by averaging $\\mathbb{z}$ over a choice of the origin in $[0,1]$. This is proved by showing a quantitative estimate on the two-point correlation function of a process in terms of its renormalized energy.

  5. Quantification of Wellbore Leakage Risk Using Non-destructive Borehole Logging Techniques

    SciTech Connect (OSTI)

    Duguid, Andrew; Butsch, Robert; Cary, J.; Celia, Michael; Chugunov, Nikita; Gasda, Sarah; Hovorka, Susan; Ramakrishnan, T. S.; Stamp, Vicki; Thingelstad, Rebecca; Wang, James

    2014-08-29

    Well integrity is important at all potential CCS locations and may play a crucial role establishing leakage risk in areas where there is a high density of existing wells that could be impacted by the storage operations including depleted petroleum fields where EOR or CCS will occur. To address a need for risk quantification methods that can be directly applied to individual wells using borehole logging tools a study was conducted using data from five wells in Wyoming. The objectives of the study were: Objective 1: Develop methods to establish the baseline flow parameters (porosity and permeability or mobility) from individual measurements of the material properties and defects in a well. Objective 2: Develop a correlation between field flow-property data and cement logs that can be used to establish the flow-properties of well materials and well features using cement mapping tools. Objective 3: Establish a method that uses the flow-property model (Objective 2) to analyze the statistical uncertainties associated with individual well leakage that can provide basis for uncertainty in risk calculations. The project objectives were met through the logging of five wells in Carbon and Natrona County Wyoming to collect data that was used to estimate individual and average well flow properties and model the results using ultrasonic data collected during the logging. Three of the five wells provided data on point and average flow properties for well annuli. Data from the other two wells were used to create models of cement permeability and test whether information collected in one well could be used to characterize another well. The results of the in-situ point measurements were confirmed by the lab measurements sidewall cores collected near the same depths Objective 1 was met using the data collected through logging, testing, and sampling. The methods were developed that can establish baseline flow parameters of wells by both point and average test methods. The methods to estimate the flow properties modeling of point pressure tests, modeling of vertical interference tests, and laboratory measurement of cased-hole sidewall cores The wells were in sufficiently good shape to allow the development of the characterization methods while still having enough defects to study differences in results as they relate to well integrity. Samples and tests analyzed from three of five wells studied in showed the cements were largely intact and had not degraded from exposure native brines. Log results taken in conjunction with the core measurements indicate that interfaces and/or problems with cement placement due to eccentering provide preferential flow paths for fluids, which can increase the effective permeability of the barrier several orders of magnitude above the permeability of intact cement. The results of the maps created using logging tools indicating that the cement condition and bond are generally good identify a need for more research to understand how logs can be used to predicteffective well permeabilities such as those measured by the VITs in this study.

  6. The high-energy radiation pattern from BFKLex with double-log collinear contributions

    E-Print Network [OSTI]

    Chachamis, G

    2015-01-01

    We study high-energy jet production in the multi-Regge limit making use of the Monte Carlo event generator BFKLex which includes collinear improvements in the form of double-log contributions as presented in [1]. Making use of the anti-kt jet algorithm in the FastJet implementation, we present results for the average transverse momentum and azimuthal angle of the produced jets when two tagged forward/backward jets are present in the final state. We also introduce a new observable which accounts for the average rapidity separation among subsequent emissions. Results are presented, for comparison, at leading order and next-to-leading order, with the resummation of collinear double logs proposed in [2].

  7. High-speed micro-electro-discharge machining.

    SciTech Connect (OSTI)

    Chandrasekar, Srinivasan Dr. (.School of Industrial Engineering, West Lafayette, IN); Moylan, Shawn P. (School of Industrial Engineering, West Lafayette, IN); Benavides, Gilbert Lawrence

    2005-09-01

    When two electrodes are in close proximity in a dielectric liquid, application of a voltage pulse can produce a spark discharge between them, resulting in a small amount of material removal from both electrodes. Pulsed application of the voltage at discharge energies in the range of micro-Joules results in the continuous material removal process known as micro-electro-discharge machining (micro-EDM). Spark erosion by micro-EDM provides significant opportunities for producing small features and micro-components such as nozzle holes, slots, shafts and gears in virtually any conductive material. If the speed and precision of micro-EDM processes can be significantly enhanced, then they have the potential to be used for a wide variety of micro-machining applications including fabrication of microelectromechanical system (MEMS) components. Toward this end, a better understanding of the impacts the various machining parameters have on material removal has been established through a single discharge study of micro-EDM and a parametric study of small hole making by micro-EDM. The main avenues for improving the speed and efficiency of the micro-EDM process are in the areas of more controlled pulse generation in the power supply and more controlled positioning of the tool electrode during the machining process. Further investigation of the micro-EDM process in three dimensions leads to important design rules, specifically the smallest feature size attainable by the process.

  8. Electric arc saw apparatus

    DOE Patents [OSTI]

    Deichelbohrer, P.R.

    1983-08-08

    A portable, hand-held electric arc saw apparatus comprising a small frame for supporting an electrically conducting rotary blade which serves as an electrode for generating an electric arc between the blade and a workpiece of opposite polarity. Electrically conducting means are provided on said frame for transmitting current to said blade. A pair of freely movable endless belts in the form of crawler treads are employed to facilitate movement of the apparatus relative to the workpiece.

  9. Electrical utilities relay settings

    SciTech Connect (OSTI)

    HACHE, J.M.

    1999-02-24

    This document contains the Hanford transmission and distribution system relay settings that are under the control of Electrical Utilities.

  10. National Electric Transmission Congestion Study Webinars | Department...

    Energy Savers [EERE]

    Services Electricity Policy Coordination and Implementation Transmission Planning National Electric Transmission Congestion Study National Electric Transmission...

  11. Curriculum Vitae Of San Jose State University Dept. of Electrical Engineering

    E-Print Network [OSTI]

    Su, Xiao

    and development of EMC product line. Responsible for project management and supervision of technical staff design methodology, ASIC design · Asynchronous Digital System Design EDUCATION Ph. D., Electrical, September 1990 to present Courses taught: Micro-computer system design, Advanced computer architectures

  12. Airborne LiDAR Detects Selectively Logged Tropical Forest Even in an Advanced Stage of Recovery

    E-Print Network [OSTI]

    Kent, Rafi; Lindsell, Jeremy A.; Laurin, Gaia Vaglio; Valentini, Riccardo; Coomes, David A.

    2015-01-01

    logged tropical forests: the attained and the attainable. Conserv. Lett. 2012, 5, 296–303. 10. Silver, W. L.; Ostertag, R.; Lugo, a. E. The Potential for Carbon Sequestration Through Reforestation of Abandoned Tropical Agricultural and Pasture Lands... be of high conservation value [2,7–9] and act as globally-important carbon sinks [9–12]. However, there is much uncertainty regarding the changing extent of regenerating forests, their rate and stage of recovery, and the influence of recovery on further...

  13. An O(M(n) log n) algorithm for the Jacobi symbol

    E-Print Network [OSTI]

    Zimmermann, Paul

    An O(M(n) log n) algorithm for the Jacobi symbol Richard P. Brent1 and Paul Zimmermann2 1 January 2010 Abstract. The best known algorithm to compute the Jacobi symbol of two n-bit integers runs Introduction We want to compute the Jacobi symbol3 (b|a) for n-bit integers a and b, where a is odd positive

  14. Evaluation of Non-Nuclear Techniques for Well Logging: Final Report

    SciTech Connect (OSTI)

    Bond, Leonard J.; Griffin, Jeffrey W.; Harris, R. V.; Denslow, Kayte M.; Moran, Traci L.

    2011-08-01

    The focus of this study is the understanding of the technical obstacles that hinder the replacement of and the disadvantages from the loss of extensive interpretation experience based on data accumulated with AmBe. Enhanced acoustic and electromagnetic sensing methods in combination with non-isotope-based well logging techniques have the potential to complement and/or replace existing isotope-based techniques, providing the opportunity to reduce oil industry dependence on isotopic sources such as AmBe.

  15. DAILY CRIME LOG This Information Is Posted In Compliance With The Student Right To Know Act.

    E-Print Network [OSTI]

    1 DAILY CRIME LOG This Information Is Posted In Compliance With The Student Right To Know Act. DATE. of Bolivar St. A-005-10 Slip and Fall 1-18-10 Signal 21 425 S. Roman St. A-006-10 Keep Off Property 1 1100 Florida Ave. A-010-10 Vehicle Damage 1-25-10 Signal 21 425 S. Roman St. A-011-10 Power Outage 1

  16. DAILY CRIME LOG This Information Is Posted In Compliance With The Student Right To Know Act.

    E-Print Network [OSTI]

    DAILY CRIME LOG This Information Is Posted In Compliance With The Student Right To Know Act. DATEB 425 S. Roman St. A-016-13 Theft of bicycle 1/23/13 Signal 21 1900 Perdido St. A-017-13 Medical With The Student Right To Know Act. DATE OFFENSE LOCATION ITEM NUMBER COMMENTS 2/1/13 Signal 21 1100 Florida Ave. B

  17. DAILY CRIME LOG This Information Is Posted In Compliance With The Student Right To Know Act.

    E-Print Network [OSTI]

    1 DAILY CRIME LOG This Information Is Posted In Compliance With The Student Right To Know Act. DATE. Roman St. A-008-09 Parked car rolls back into another parked car 1-23-09 Signal 21L 1100 Florida Ave. A With The Student Right To Know Act. DATE OFFENSE LOCATION ITEM NUMBER COMMENTS 2-27-09 Signal 21 1100 Florida Ave

  18. DAILY CRIME LOG This Information Is Posted In Compliance With The Student Right To Know Act.

    E-Print Network [OSTI]

    DAILY CRIME LOG This Information Is Posted In Compliance With The Student Right To Know Act. DATE-12 Stolen Bike 1/17/12 Signal 21 425 S. Roman St. A-009-12 Damage to Vehicle 1/18/12 Signal 21 1100 Florida/25/12 Signal 24 1900 Gravier St. A-016-12 Medical Emergency 1/30/12 Signal 20 425 S. Roman St. A-017-12 Vehicle

  19. DAILY CRIME LOG This Information Is Posted In Compliance With The Student Right To Know Act.

    E-Print Network [OSTI]

    1 DAILY CRIME LOG This Information Is Posted In Compliance With The Student Right To Know Act. DATE Gravier St. A-008-11 Subject allegedly stalking employee 1-19-11 Signal 20 Tulane and Roman Sts. A-009 (Perdido Lot) A-012-11 Auto accident 1/25/11 Signal 21L 136 S. Roman St. A-013-11 Lost or stolen internet

  20. DAILY CRIME LOG This Information Is Posted In Compliance With The Student Right To Know Act.

    E-Print Network [OSTI]

    1 DAILY CRIME LOG This Information Is Posted In Compliance With The Student Right To Know Act. DATE-08 Student hit parked vehicles 3-6-08 Signal 21 425 S. Roman St. C-001-08 Damage to parked vehicle 3-7-08 Signal 21 1900 Perdido St. C-002-08 Damage to vehicle 3-7-08 Signal 21 425 S. Roman St. C-003-08 Damage

  1. Emission Impacts of Electric Vehicles

    E-Print Network [OSTI]

    Wang, Quanlu; DeLuchi, Mark A.; Sperling, Daniel

    1990-01-01

    greenhouse effect, and electric vehicles," Proceedingso/9thInternational Electric Vehicles Symposium, 1988. 14. R. M.of 9th International Electric Vehicles Sympo- sium, 1988.

  2. Electric Vehicle Smart Charging Infrastructure

    E-Print Network [OSTI]

    Chung, Ching-Yen

    2014-01-01

    for Multiplexed Electric Vehicle Charging”, US20130154561A1,Chynoweth, ”Intelligent Electric Vehicle Charging System”,of RFID Mesh Network for Electric Vehicle Smart Charging

  3. The Case for Electric Vehicles

    E-Print Network [OSTI]

    Sperling, Daniel

    2001-01-01

    land Press, 1995 TESTING ELECTRIC VEHICLE DEMAND IN " HYBRIDThe Case for Electric Vehicles DanieI Sperlmg Reprint UCTCor The Case for Electric Vehicles Darnel Sperling Institute

  4. Renewable Electricity Futures Study

    E-Print Network [OSTI]

    Renewable Electricity Futures Study Executive Summary NREL is a national laboratory of the U for Sustainable Energy, LLC. Volume 2 PDF Volume 3 PDF Volume 1 PDF Volume 4 PDF #12;Renewable Electricity Futures. National Renewable Energy Laboratory Suggested Citations Renewable Electricity Futures Study (Entire Report

  5. Washington State Electric Vehicle

    E-Print Network [OSTI]

    California at Davis, University of

    Washington State Electric Vehicle Implementation Bryan Bazard Maintenance and Alternate Fuel Technology Manager #12;Executive Order 14-04 Requires the procurement of electric vehicles where and equipment with electricity or biofuel to the "extent practicable" by June 2015 1. The vehicle is due

  6. Electrical & Computer Engineering

    E-Print Network [OSTI]

    Electrical & Computer Engineering 2014-2015StudentHandbook For students entering the Masters of Science in Electrical & Computer Engineering: Pittsburgh, Silicon Valley, Rwanda, or Technology Enhanced, 2014 #12;This document is for the internal use of the Department of Electrical and Computer Engineering

  7. LABORATORY V ELECTRIC CIRCUITS

    E-Print Network [OSTI]

    Minnesota, University of

    Lab V -1 LABORATORY V ELECTRIC CIRCUITS Electrical devices are the cornerstones of our modern world understanding of them. In the previous laboratory, you studied the behavior of electric fields and their effect successfully completing this laboratory, you should be able to: · apply the concept of circuit to any

  8. ELECTRICAL & COMPUTER ENGINEERING

    E-Print Network [OSTI]

    ELECTRICAL & COMPUTER ENGINEERING SEMINAR "A Random Walk on Image Patches" by Prof. Francois Meyer Electrical, Computer, and Energy Engineering University of Colorado--Boulder Monday, April 2, 2012, 11:00 a a Ph.D. degree in electrical engineering from INRIA, France, in 1993. Meyer worked on the thermonuclear

  9. Electronics, Electrical Engineering

    E-Print Network [OSTI]

    SCHOOL OF Electronics, Electrical Engineering and Computer Science IS IN YOUR HANDS THE FUTURE #12;SCHOOL OF Electronics, Electrical Engineering and Computer Science2 CAREERS IN ELECTRONICS, ELECTRICAL ENGINEERING AND COMPUTER SCIENCE This is an exciting time to join the School of EEECS at Queen's University

  10. BRITISH COLUMBIA'S ELECTRICITY MARKET

    E-Print Network [OSTI]

    REFORMING BRITISH COLUMBIA'S ELECTRICITY MARKET: A WAY FORWARD DR. MARKJACCARD BRITISHCOLUMBIATASKFORCEON ELECTRICITYMARKETREFORM: FINALREPORT JANUARY1998 #12;BRITISH COLUMBIA TASK FORCE ON ELECTRICITY with the mandate to lead a Task Force to bring forward to government a package of electricity market reform

  11. Micro electro mechanical system optical switching

    DOE Patents [OSTI]

    Thorson, Kevin J; Stevens, Rick C; Kryzak, Charles J; Leininger, Brian S; Kornrumpf, William P; Forman, Glenn A; Iannotti, Joseph A; Spahn, Olga B; Cowan, William D; Dagel, Daryl J

    2013-12-17

    The present disclosure includes apparatus, system, and method embodiments that provide micro electo mechanical system optical switching and methods of manufacturing switches. For example, one optical switch embodiment includes at least one micro electro mechanical system type pivot mirror structure disposed along a path of an optical signal, the structure having a mirror and an actuator, and the mirror having a pivot axis along a first edge and having a second edge rotatable with respect to the pivot axis, the mirror being capable of and arranged to be actuated to pivot betweeen a position parallel to a plane of an optical signal and a position substantially normal to the plane of the optical signal.

  12. Micro-system inertial sensing technology overview.

    SciTech Connect (OSTI)

    Allen, James Joe

    2009-02-01

    The purpose of this report is to provide an overview of Micro-System technology as it applies to inertial sensing. Transduction methods are reviewed with capacitance and piezoresistive being the most often used in COTS Micro-electro-mechanical system (MEMS) inertial sensors. Optical transduction is the most recent transduction method having significant impact on improving sensor resolution. A few other methods are motioned which are in a R&D status to hopefully allow MEMS inertial sensors to become viable as a navigation grade sensor. The accelerometer, gyroscope and gravity gradiometer are the type of inertial sensors which are reviewed in this report. Their method of operation and a sampling of COTS sensors and grade are reviewed as well.

  13. Modeling of capillary pressure behavior using standard open hole wireline log data: Demonstrated on carbonates from the Middle East

    SciTech Connect (OSTI)

    Ross, C.M. [Rice Univ., Houston, TX (United States); Callender, C.A.; Turbeville, J.B. [and others

    1995-12-31

    A new technique was developed to model capillary pressure behavior from wireline log data and applied to carbonate reservoir rock from a Saudi Aramco field. The method utilizes image analysis of petrographic thin sections, capillary pressure measurements, and neural network analysis of standard open hole wireline log data. Twenty capillary pressure curves and their associated pore type proportions (identified in thin section) are the basis for the capillary pressure predictive model for the reservoir interval under study. Neural network analysis of the wireline log data was used to continuously predict pore type proportions downhole. The neural network-derived pore proportions were than applied in constructing wireline log-based capillary pressure curves using the capillary pressure predictive model. This method provides an accurate means of determining capillary pressure behavior from wireline log data and extends the applicability of the limited number of available capillary pressure curves. Once trained, the neural network may be applied to other wells in the field as long as the training set (both rock samples and wireline log types) is representative within the study area. The capillary pressure curves predicted from wireline log data can be used for the same purposes as capillary pressure curves measured on core samples, such as determining water saturation in intervals above and within the transition zone.

  14. Ignition and extinction phenomena in helium micro hollow cathode discharges

    SciTech Connect (OSTI)

    Kulsreshath, M. K.; Schwaederle, L.; Dufour, T.; Lefaucheux, P.; Dussart, R.; Overzet, L. J.

    2013-12-28

    Micro hollow cathode discharges (MHCD) were produced using 250??m thick dielectric layer of alumina sandwiched between two nickel electrodes of 8??m thickness. A through cavity at the center of the chip was formed by laser drilling technique. MHCD with a diameter of few hundreds of micrometers allowed us to generate direct current discharges in helium at up to atmospheric pressure. A slowly varying ramped voltage generator was used to study the ignition and the extinction periods of the microdischarges. The analysis was performed by using electrical characterisation of the V-I behaviour and the measurement of He*({sup 3}S{sub 1}) metastable atoms density by tunable diode laser spectroscopy. At the ignition of the microdischarges, 2??s long current peak as high as 24?mA was observed, sometimes followed by low amplitude damped oscillations. At helium pressure above 400?Torr, an oscillatory behaviour of the discharge current was observed just before the extinction of the microdischarges. The same type of instability in the extinction period at high pressure also appeared on the density of He*({sup 3}S{sub 1}) metastable atoms, but delayed by a few ?s relative to the current oscillations. Metastable atoms thus cannot be at the origin of the generation of the observed instabilities.

  15. INNOVATIVE EDDY CURRENT PROBE FOR MICRO DEFECTS

    SciTech Connect (OSTI)

    Santos, Telmo G.; Vilaca, Pedro; Quintino, Luisa [IDMEC, Av. Rovisco Pais, 1049-001 Lisbon (Portugal); Santos, Jorge dos [GKSS, Max-Planck-Street 1, D-21502 Geesthacht (Germany); Rosado, Luis [IST, UTL, Av. Rovisco Pais, 1049-001 Lisbon (Portugal)

    2010-02-22

    This paper reports the development of an innovative eddy current (EC) probe, and its application to micro-defects on the root of the Friction Stir Welding (FSW). The new EC probe presents innovative concept issues, allowing 3D induced current in the material, and a lift-off independence. Validation experiments were performed on aluminium alloys processed by FSW. The results clearly show that the new EC probe is able to detect and sizing surface defects about 60 microns depth.

  16. 150K - 200K miniature pulse tube cooler for micro satellites

    SciTech Connect (OSTI)

    Chassaing, Clément; Butterworth, James; Aigouy, Gérald [Air Liquide Advanced Technologies (AL-AT) - 38360 Sassenage (France); Daniel, Christophe [Centre National D'Etudes Spatiales (CNES) - 31401 Toulouse (France); Crespin, Maurice; Duvivier, Eric [STEEL électronique - 31220 Martres Tolosane (France)

    2014-01-29

    Air Liquide is working with the CNES and Steel électronique in 2013 to design, manufacture and test a Miniature Pulse Tube Cooler (MPTC) to cool infrared detectors for micro-satellite missions. The cooler will be particularly adapted to the needs of the CNES MICROCARB mission to study atmospheric Carbon Dioxide which presents absorption lines in the thermal near infrared, at 1.6 ?m and 2.0 ?m. The required cooler temperature is from 150 to 200K with cooling power between 1 and 3 watts. The overall electrical power budget including electronics is less than 20W with a 288-300K rejection temperature. Particular attention is therefore paid to optimizing overall system efficiency. The active micro vibration reduction system and thermal control systems already developed for the Air Liquide Large Pulse Tube Cooler (LPTC) are currently being implemented into a new high efficiency electronic architecture. The presented work concerns the new cold finger and electronic design. The cooler uses the compressor already developed for the 80K Miniature Pulse Tube Cryocooler. This Pulse Tube Cooler addresses the requirements of space missions where extended continuous operating life time (>5 years), low mass and low micro vibration levels are critical.

  17. Instantaneous electric energy and electric power dissipation in dispersive media

    E-Print Network [OSTI]

    Fan, Shanhui

    Instantaneous electric energy and electric power dissipation in dispersive media Wonseok Shin,1 the instantaneous densities of electric energy and electric power dissipation in lossless and lossy dis- persive average of the electric energy density is [3] ue 1 4 d d jE0j2 . (1) The time average of the electric

  18. GaAs micro-pyramids serving as optical micro-cavities

    SciTech Connect (OSTI)

    Karl, M.; Beck, T.; Li, S.; Hu, D. Z.; Schaadt, D. M.; Kalt, H.; Hetterich, M.

    2010-01-04

    An efficient light-matter coupling requires high-quality (Q) micro-cavities with small mode volume. We suggest GaAs micro-pyramids placed on top of AlAs/GaAs distributed Bragg reflectors to be promising candidates. The pyramids were fabricated by molecular-beam epitaxy, electron-beam lithography and a subsequent wet-chemical etching process using a sacrificial AlAs layer. Measured Q-factors of optical modes in single pyramids reach values up to 650. A finite-difference time-domain simulation assuming a simplified cone-shaped geometry suggests possible Q-factors up to 3600. To enhance the light confinement in the micro-pyramids we intend to overgrow the pyramidal facets with a Bragg mirror--results of preliminary tests are given.

  19. JOURNAL OF GEOPHYSICAL RESEARCH, VOL. 102, NO. B8, PAGES 18,391-18,403, AUGUST 10, 1997 Spectral analyses of the KTB sonic and density logs

    E-Print Network [OSTI]

    Jones, Alan G.

    , coherences and transfer functions ofthe Gennan Continental Deep Drilling Program (KTB) sonic and density logs is that fluctuations in the physical logs in the intermediate wavelength range (-10-150 m) are dominated by cracks ofborehole logs. Traditionally, deep boreholes (1000 m or deeper) in crystal- line rocks were drilled

  20. Inversion-based method for interpretation of logging-while-drilling density measurements acquired in high-angle and horizontal wells

    E-Print Network [OSTI]

    Torres-Verdín, Carlos

    Inversion-based method for interpretation of logging-while-drilling density measurements acquired-based inversion method to improve the petrophysical interpretation of logging-while-drilling density measurements measurements. INTRODUCTION Conventional processing of logging-while-drilling (LWD) den- sity measurements

  1. AVTA Federal Fleet PEV Readiness Data Logging and Characterization Study for NASA Glenn Research Center

    SciTech Connect (OSTI)

    Schey, Stephen; Francfort, Jim

    2014-10-01

    The Advanced Vehicle Testing Activity’s study seeks to collect and evaluate data to validate the utilization of advanced plug-in electric vehicle (PEV) transportation. This report focuses on the NASA Glenn Research Center (GRC) fleet to identify daily operational characteristics of select vehicles and report findings on vehicle and mission characterizations to support the successful introduction of PEVs into the agencies’ fleets. Individual observations of these selected vehicles provide the basis for recommendations related to electric vehicle adoption and whether a battery electric vehicle or plug-in hybrid electric vehicle (collectively referred to as PEVs) can fulfill the mission requirements.

  2. Annual Logging Symposium, June 26-29, 2005 INFLUENCE OF OIL SATURATION AND WETTABILITY

    E-Print Network [OSTI]

    Torres-Verdín, Carlos

    electrical measurements in petrophysical analysis are the resistivity formation factor, 100%R Sw bulk), and the resistivity index, 100% 100%R Sw SwI =

  3. Investigation of the high-frequency wavefield of an off-center monopole acoustic logging-while-drilling tool

    E-Print Network [OSTI]

    Wang, Hua

    During logging-while-drilling (LWD) operations, complex drill string movements and the weight of the drill pipe often lead to a measurement tool that is not centralized. Therefore, studies of the response of an off-center ...

  4. Supplementary Materials Table 1: Simulated log-normal survival data marginal posterior probability of inclusion of relevant

    E-Print Network [OSTI]

    Vannucci, Marina

    .1835 Table 1: Simulated log-normal survival data: Marginal posterior probabilities of inclusion of rele- vant: Marginal posterior probabilities of inclusion of rele- vant variables under different maximum correlation

  5. Method of assaying uranium with prompt fission and thermal neutron borehole logging adjusted by borehole physical characteristics. [Patient application

    DOE Patents [OSTI]

    Barnard, R.W.; Jensen, D.H.

    1980-11-05

    Uranium formations are assayed by prompt fission neutron logging techniques. The uranium in the formation is proportional to the ratio of epithermal counts to thermal or epithermal dieaway. Various calibration factors enhance the accuracy of the measurement.

  6. Numerical simulation of borehole acoustic logging in the frequency and time domains with hp-adaptive finite elements

    E-Print Network [OSTI]

    Torres-Verdín, Carlos

    for Computational Engineering and Sciences (ICES), The University of Texas at Austin, 201 East 24th Street, ACES and for the improvement of acoustic logging techniques used by oil- and oil-service companies to detect and quantify

  7. Method of using an electric field controlled emulsion phase contactor

    DOE Patents [OSTI]

    Scott, T.C.

    1993-11-16

    A system is described for contacting liquid phases comprising a column for transporting a liquid phase contacting system, the column having upper and lower regions. The upper region has a nozzle for introducing a dispersed phase and means for applying thereto a vertically oriented high intensity pulsed electric field. This electric field allows improved flow rates while shattering the dispersed phase into many micro-droplets upon exiting the nozzle to form a dispersion within a continuous phase. The lower region employs means for applying to the dispersed phase a horizontally oriented high intensity pulsed electric field so that the dispersed phase undergoes continuous coalescence and redispersion while being urged from side to side as it progresses through the system, increasing greatly the mass transfer opportunity. 5 figures.

  8. Method of using an electric field controlled emulsion phase contactor

    DOE Patents [OSTI]

    Scott, Timothy C. (Knoxville, TN)

    1993-01-01

    A system for contacting liquid phases comprising a column for transporting a liquid phase contacting system, the column having upper and lower regions. The upper region has a nozzle for introducing a dispersed phase and means for applying thereto a vertically oriented high intensity pulsed electric field. This electric field allows improved flow rates while shattering the dispersed phase into many micro-droplets upon exiting the nozzle to form a dispersion within a continuous phase. The lower region employs means for applying to the dispersed phase a horizontally oriented high intensity pulsed electric field so that the dispersed phase undergoes continuous coalescence and redispersion while being urged from side to side as it progresses through the system, increasing greatly the mass transfer opportunity.

  9. Student Administration System Q&A: Logging into the SA System with NetID Updated 08/15/2013

    E-Print Network [OSTI]

    Alpay, S. Pamir

    Student Administration System Q&A: Logging into the SA System with NetID Updated 08/15/2013 Q&A: Logging into the Student Administration (SA) System with Your NetID (Effective 08/09/2013) Q: What-numeric NetID and NetID password. Q: Who is not affected by this change? A: Administrative users who currently

  10. Chiral electric separation effect in the quark-gluon plasma

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Jiang, Yin; Liao, Jinfeng; Huang, Xu-Guang

    2015-02-02

    In this paper we introduce and compute a new transport coefficient for the quark-gluon plasma (QGP) at very high temperature. This new coefficient ??e, the CESE (Chiral Electric Separation Effect) conductivity, quantifies the amount of axial current JA that is generated in response to an externally applied electric field eE: JA=??e(eE). Starting with a rather general argument in the kinetic theory framework, we show how a characteristic structure ??e???5 emerges, which also indicates the CESE as an anomalous transport effect occurring only in a parity-odd environment with nonzero axial charge density ?5 ? 0. Using the Hard-Thermal-Loop framework, the CESEmore »conductivity for the QGP is found to be ??e = (#)TTrfQeQA/g?ln(1/g) ??5/T² to the leading-log accuracy with the numerical constant (#) depending on favor content, e.g., (#)=14.5163 for u, d light flavors.« less

  11. Chiral electric separation effect in the quark-gluon plasma

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Jiang, Yin [Indiana Univ., Bloomington, IN (United States); Liao, Jinfeng [Indiana Univ., Bloomington, IN (United States); Brookhaven National Lab., Upton, NY (United States); Huang, Xu-Guang [Fudan Univ., Shanghai (China)

    2015-02-01

    In this paper we introduce and compute a new transport coefficient for the quark-gluon plasma (QGP) at very high temperature. This new coefficient ??e, the CESE (Chiral Electric Separation Effect) conductivity, quantifies the amount of axial current JA that is generated in response to an externally applied electric field eE: JA=??e(eE). Starting with a rather general argument in the kinetic theory framework, we show how a characteristic structure ??e???5 emerges, which also indicates the CESE as an anomalous transport effect occurring only in a parity-odd environment with nonzero axial charge density ?5 ? 0. Using the Hard-Thermal-Loop framework, the CESE conductivity for the QGP is found to be ??e = (#)TTrfQeQA/g?ln(1/g) ??5/T² to the leading-log accuracy with the numerical constant (#) depending on favor content, e.g., (#)=14.5163 for u, d light flavors.

  12. Electrical system architecture

    DOE Patents [OSTI]

    Algrain, Marcelo C. (Peoria, IL); Johnson, Kris W. (Washington, IL); Akasam, Sivaprasad (Peoria, IL); Hoff, Brian D. (East Peoria, IL)

    2008-07-15

    An electrical system for a vehicle includes a first power source generating a first voltage level, the first power source being in electrical communication with a first bus. A second power source generates a second voltage level greater than the first voltage level, the second power source being in electrical communication with a second bus. A starter generator may be configured to provide power to at least one of the first bus and the second bus, and at least one additional power source may be configured to provide power to at least one of the first bus and the second bus. The electrical system also includes at least one power consumer in electrical communication with the first bus and at least one power consumer in electrical communication with the second bus.

  13. Thermoacoustic magnetohydrodynamic electrical generator

    SciTech Connect (OSTI)

    Wheatley, J.C.; Swift, G.W.; Migliori, A.

    1984-11-16

    A thermoacoustic magnetohydrodynamic electrical generator includes an intrinsically irreversible thermoacoustic heat engine coupled to a magnetohydrodynamic electrical generator. The heat engine includes an electrically conductive liquid metal as the working fluid and includes two heat exchange and thermoacoustic structure assemblies which drive the liquid in a push-pull arrangement to cause the liquid metal to oscillate at a resonant acoustic frequency on the order of 1000 Hz. The engine is positioned in the field of a magnet and is oriented such that the liquid metal oscillates in a direction orthogonal to the field of the magnet, whereby an alternating electrical potential is generated in the liquid metal. Low-loss, low-inductance electrical conductors electrically connected to opposite sides of the liquid metal conduct an output signal to a transformer adapted to convert the low-voltage, high-current output signal to a more usable higher voltage, lower current signal.

  14. Thermoacoustic magnetohydrodynamic electrical generator

    DOE Patents [OSTI]

    Wheatley, John C. (Los Alamos, NM); Swift, Gregory W. (Los Alamos, NM); Migliori, Albert (Santa Fe, NM)

    1986-01-01

    A thermoacoustic magnetohydrodynamic electrical generator includes an intrinsically irreversible thermoacoustic heat engine coupled to a magnetohydrodynamic electrical generator. The heat engine includes an electrically conductive liquid metal as the working fluid and includes two heat exchange and thermoacoustic structure assemblies which drive the liquid in a push-pull arrangement to cause the liquid metal to oscillate at a resonant acoustic frequency on the order of 1,000 Hz. The engine is positioned in the field of a magnet and is oriented such that the liquid metal oscillates in a direction orthogonal to the field of the magnet, whereby an alternating electrical potential is generated in the liquid metal. Low-loss, low-inductance electrical conductors electrically connected to opposite sides of the liquid metal conduct an output signal to a transformer adapted to convert the low-voltage, high-current output signal to a more usable higher voltage, lower current signal.

  15. Electric power monthly

    SciTech Connect (OSTI)

    1995-08-01

    The Energy Information Administration (EIA) prepares the Electric Power Monthly (EPM) for a wide audience including Congress, Federal and State agencies, the electric utility industry, and the general public. This publication provides monthly statistics for net generation, fossil fuel consumption and stocks, quantity and quality of fossil fuels, cost of fossil fuels, electricity sales, revenue, and average revenue per kilowatthour of electricity sold. Data on net generation, fuel consumption, fuel stocks, quantity and cost of fossil fuels are also displayed for the North American Electric Reliability Council (NERC) regions. The EIA publishes statistics in the EPM on net generation by energy source, consumption, stocks, quantity, quality, and cost of fossil fuels; and capability of new generating units by company and plant. The purpose of this publication is to provide energy decisionmakers with accurate and timely information that may be used in forming various perspectives on electric issues that lie ahead.

  16. Micro-combustor for gas turbine engine

    DOE Patents [OSTI]

    Martin, Scott M. (Oviedo, FL)

    2010-11-30

    An improved gas turbine combustor (20) including a basket (26) and a multiplicity of micro openings (29) arrayed across an inlet wall (27) for passage of a fuel/air mixture for ignition within the combustor. The openings preferably have a diameter on the order of the quenching diameter; i.e. the port diameter for which the flame is self-extinguishing, which is a function of the fuel mixture, temperature and pressure. The basket may have a curved rectangular shape that approximates the shape of the curved rectangular shape of the intake manifolds of the turbine.

  17. Polygonal micro-whirlpools induced in ferrofluids

    E-Print Network [OSTI]

    Marcin Bacia; Weronika Lamperska; Jan Masajada; Slawomir Drobczynski; Maciej Marc

    2015-04-23

    We report on the observation of the polygonal whirlpools in the thin layer of ferrofluid under illumination with a laser beam carrying optical vortex and in the presence of a vertical magnetic field. This kind of structures have attracted attention after discovering a hexagonal storm in Saturns atmosphere. Our polygonal whirlpools were created in a closed system (no free surfaces) in micro scale (whirlpool diameter less than 20 micrometers) by the use of holographic optical tweezers. The polygonal shape was changed by varying the magnetic field strength or value of the optical vortex topological charge.

  18. The Durham Micro-Optics Programme

    E-Print Network [OSTI]

    J. Schmoll; C. M. Dubbeldam; D. J. Robertson; J. Yao

    2005-09-22

    The Durham Microoptics Programme was established to develop key components to be used for integral field spectrographs for upcoming instrumentation projects, focussing on currently existing telescopes as well as on the next generation of ELTs. These activities include monolithic multi-optics machining and grinding, optical surface improvement using various post polishing techniques and replication of micro-optical components. While these developments have mostly slicer-type IFUs in mind, also new types of microlens arrays are in development for fiber based high contrast IFU systems.

  19. Theory of a triangular micro-robot

    E-Print Network [OSTI]

    Vladimir A. Vladimirov

    2012-10-02

    In this paper we study the self-propulsion of a triangular micro-robot (or triangle-robot) which consists of three spheres connected by three rods; the rods' lengths are changing independently and periodically. Using the asymptotic procedure containing the two-timing method and distinguished limit arguments, we obtain analytic expressions for self-propulsion velocity the angular velocity. Our calculations show that a triangle-robot rotates with constant angular velocity around its centroid, while the centroid moves in a circle. The important special case of zero angular velocity represents rectilinear translational self-propulsion with constant velocity.

  20. The MicroBooNE Experiment - Collaboration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired Solar FuelTechnologyTel: Name:Department ofThe DOE Tours MicroBooNE! -