Sample records for locations albuquerque nm

  1. Sandia Corporation (Albuquerque, NM)

    DOE Patents [OSTI]

    Diver, Richard B. (Albuquerque, NM)

    2010-02-23T23:59:59.000Z

    A Theoretical Overlay Photographic (TOP) alignment method uses the overlay of a theoretical projected image of a perfectly aligned concentrator on a photographic image of the concentrator to align the mirror facets of a parabolic trough solar concentrator. The alignment method is practical and straightforward, and inherently aligns the mirror facets to the receiver. When integrated with clinometer measurements for which gravity and mechanical drag effects have been accounted for and which are made in a manner and location consistent with the alignment method, all of the mirrors on a common drive can be aligned and optimized for any concentrator orientation.

  2. ZERH Training: Albuquerque, NM | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6, 2014 1:00PM to 5:00PM MST Doc Savage Supply 600 Candelaria Rd. NE Albuquerque, New Mexico The DOE Zero Energy Ready Home is a high performance home which is so energy...

  3. albuquerque nm 1st: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    20 21 22 23 24 25 Next Page Last Page Topic Index 1 Proceedings of the American Solar Energy Society 98 Conference Albuquerque, NM (June 1998) Multidisciplinary Databases and...

  4. 32nd Conf. Radar Meteorology Albuquerque, NM, 2005

    E-Print Network [OSTI]

    Xue, Ming

    32nd Conf. Radar Meteorology Albuquerque, NM, 2005 J1J.4 MULTIPLE DOPPLER WIND ANALYSIS and smoothness constraints by incorporating them into a cost function yielding the 3-D wind. In this study, this 3DVAR analysis method is adapted to perform multiple Doppler wind analysis for CASA radars, together

  5. Proceedings of Nuclear and Emerging Technologies for Space 2013 Albuquerque, NM, February 25-28, 2013

    E-Print Network [OSTI]

    Meunier, Michel

    Proceedings of Nuclear and Emerging Technologies for Space 2013 Albuquerque, NM, February 25 #12;Proceedings of Nuclear and Emerging Technologies for Space 2013 Albuquerque, NM, February 25-28, 2013 Paper 6722 DRAGON5: Designing Computational Schemes Dedicated to Fission Nuclear Reactors

  6. Proceedings of the American Solar Energy Society 98 Conference Albuquerque, NM (June 1998)

    E-Print Network [OSTI]

    Delaware, University of

    Proceedings of the American Solar Energy Society 98 Conference Albuquerque, NM (June 1998) 131 and Environmental Policy University of Delaware Newark, DE 19716 Steven Letendre Green Mountain College One College Circle Poultney, VT 05764 and Center for Energy and Environmental Policy University of Delaware Donald W

  7. EA-1906: Operations, Consolidation, and Upgrades at the Office of Secure Transportation Western Command Site, Albuquerque, NM

    Broader source: Energy.gov [DOE]

    This EA evaluates environmental impacts associated with the siting and construction of several proposed buildings, including a new vehicle maintenance facility and mobile equipment maintenance building (and their support structures) at the Western Command Site, Albuquerque, NM.

  8. Proceedings of the American Solar Energy Society Solar 98 Conference Albuquerque, NM (June 1998): 231-237.

    E-Print Network [OSTI]

    Delaware, University of

    Proceedings of the American Solar Energy Society Solar 98 Conference Albuquerque, NM (June 1998 technologies, like photovoltaics (PV), can offer additional benefits to electric utility companies utility company to defer investments in upgrading transmission and distribution facilities, among other

  9. Project DEEP STEAM: fourth meeting of the technical advisory panel, Albuquerque, NM, November 1980

    SciTech Connect (OSTI)

    Fox, R.L.; Donaldson, A.B.; Eisenhawer, S.W.; Hart, C.M.; Johnson, D.R.; Mulac, A.J.; Wayland, J.R.; Weirick, L.J.

    1981-07-01T23:59:59.000Z

    The Fourth Project DEEP STEAM Technical Advisory Panel Meeting was held on 5 and 6 November 1980 in Albuquerque, New Mexico, to review the status of project DEEP STEAM. This Proceedings, following the order of the meeting, is divided into five main sections: the injection string modification program, the downhole steam generator program, supporting activities, field testing, and the Advisory Panel recommendations and discussion. Each of the 17 presentations is summarized, and a final Discussion section has been added, when needed, for inclusion of comments and replies related to specific presentations. Finally, the Advisory Panel recommendations and the ensuing discussion are summarized in the closing section.

  10. Comparing Approaches to Locating Boreholes in Spatially Heterogeneous Aquifers Sean A. McKenna, Sandia National Laboratories, Albuquerque, New Mexico

    E-Print Network [OSTI]

    Kenna, Sandia National Laboratories, Albuquerque, New Mexico Abstract Limited sampling of an aquifer

  11. The University of New Mexico is located in Albuquerque, the largest city in New Mexico. Albuquerque is an ethnically diverse city of half a million residents that has been listed among the smartest U.S. cities and best

    E-Print Network [OSTI]

    Maccabe, Barney

    The University of New Mexico is located in Albuquerque, the largest city in New Mexico for hiking, biking, rock climbing and skiing. Photo credit: Tom Brahl Photo The University of New Mexico is the premier research university in the state of New Mexico. UNM is a Carnegie Very High Research Activity

  12. Sandia Corporation (Albuquerque, NM)

    DOE Patents [OSTI]

    Ewsuk, Kevin G. (Albuquerque, NM); Arguello, Jr., Jose G. (Albuquerque, NM)

    2006-01-31T23:59:59.000Z

    A method of designing a primary geometry, such as for a forming die, to be used in a powder pressing application by using a combination of axisymmetric geometric shapes, transition radii, and transition spaces to simulate the geometry where the shapes can be selected from a predetermined list or menu of axisymmetric shapes and then developing a finite element mesh to represent the geometry. This mesh, along with material properties of the component to be designed and powder, is input to a standard deformation finite element code to evaluate the deformation characteristics of the component being designed. The user can develop the geometry interactively with a computer interface in minutes and execute a complete analysis of the deformation characteristics of the simulated component geometry.

  13. The University of New Mexico MSC01 1220 1 University of New Mexico Albuquerque, NM 87131-0001 Phone 505.277.6947 Fax 505.277.2321 www.unm.edu MEMORANDUMMEMORANDUM

    E-Print Network [OSTI]

    New Mexico, University of

    The University of New Mexico · MSC01 1220 · 1 University of New Mexico · Albuquerque, NM 87131 a balanced approach to long-term sustainability. The changes should result in 100.7% funding in 2043 retirees until the fund is 100% funded. · The COLA reduction is based on the median retirement annuity

  14. The NNSA Albuquerque Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Albuquerque Complex Transition Site National Nuclear Security Administration - Service Center Internet Site Skip to Content Click to make text smaller Click to make text larger...

  15. IEEE/NPSS Symposium on Fusion Engineering October 25 29, 1999, Albuquerque, New Mexico

    E-Print Network [OSTI]

    18 th IEEE/NPSS Symposium on Fusion Engineering October 25 29, 1999, Albuquerque, New Mexico, 1999, Albuquerque, New Mexico measured from tiles collected from a similar location in the TFTR vacuum

  16. 18 th IEEE/NPSS Symposium on Fusion Engineering October 25 --29, 1999, Albuquerque, New Mexico

    E-Print Network [OSTI]

    18 th IEEE/NPSS Symposium on Fusion Engineering October 25 -- 29, 1999, Albuquerque, New Mexico, 1999, Albuquerque, New Mexico measured from tiles collected from a similar location in the TFTR vacuum

  17. Tiger Team assessment of the Sandia National Laboratories, Albuquerque

    SciTech Connect (OSTI)

    Not Available

    1991-05-01T23:59:59.000Z

    This report documents the Tiger Team Assessment of Sandia National Laboratories (SNL), Albuquerque, located in Albuquerque, New Mexico. SNL, Albuquerque, is operated by the Sandia Corporation (a wholly owned subsidiary of the American Telephone and Telegraph Company) for the US Department of Energy (DOE). The environmental assessment also included DOE tenant facilities at Ross Aviation, Albuquerque Microelectronics Operation, and the Central Training Academy. The assessment was conducted from April 15 to May 24, 1991, under the auspices of DOE's Office of Special Projects under the Assistant Secretary for Environment, Safety and Health (ES H). The assessment was comprehensive, encompassing ES H disciplines, management, self-assessments, and quality assurance; transportation; and waste management operations. Compliance with applicable federal, state, and local regulations; applicable DOE Orders; best management practices; and internal SNL, Albuquerque, requirements were assessed. In addition, an evaluation of the adequacy and effectiveness of DOE and SNL, Albuquerque management of ES H programs was conducted.

  18. DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Albuquerque...

    Energy Savers [EERE]

    Zero Energy Ready Home Case Study: Palo Duro Homes, Albuquerque, NM Case study of a New Mexico-based home builder who has built more DOE Zero Energy Ready certified homes than...

  19. Sandia National Laboratories: the Albuquerque Explora Science...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Albuquerque Explora Science Museum Two Sandia Leaders Elected American Association for the Advancement of Science Fellows On December 15, 2014, in Climate, Energy,...

  20. Albuquerque trio wins Supercomputing Challenge

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWP TWP RelatedCellulase C. bescii CelA, adefault SignYearYearAlbuquerque

  1. Albuquerque Operations Office, Albuquerque, New Mexico: Technology summary

    SciTech Connect (OSTI)

    Not Available

    1994-08-01T23:59:59.000Z

    This document has been prepared by the Department of Energy`s (DOE) Environmental Management (EM) Office of Technology Development (OTD) in order to highlight research, development, demonstration, testing, and evaluation (RDDT&E) activities funded through the Albuquerque Operations Office. Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. The information has been assembled from recently produced OTD documents that highlight technology development activities within each of the OTD program elements. These integrated program summaries include: Volatile Organic Compounds in Non-Arid Soils, Volatile Organic Compounds in Arid Soils, Mixed Waste Landfill Integrated Demonstration, Uranium in Soils Integrated Demonstration, Characterization, Monitoring, and Sensor Technology, In Situ Remediation, Buried Waste Integrated Demonstration, Underground Storage Tank, Efficient Separations and Processing, Mixed Waste Integrated Program, Rocky Flats Compliance Program, Pollution Prevention Program, Innovation Investment Area, and Robotics Technology.

  2. albuquerque nm usa: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    which for the Ashtech G12TM and NovAtel PowerPack OEM2 (with special Precise Velocity (PV) firmware) receivers. In order Calgary, University of 82 Proc. ASPE, Precision...

  3. Michael S. Grumbine 1319 Bernardo Court NE, Albuquerque, NM 87113

    E-Print Network [OSTI]

    Sibille, Etienne

    improvement. Knowledge of electronics design, software development, mechanical packaging, testing@yahoo.com Senior engineering and program manager and technical leader with proven experience in the development through its lifecycle of concept, design, prototype, test, manufacture and customer support. Strong focus

  4. David Sandia National Laboratories, Albuquerque, NM (United States) USDOE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisitingContract Management Fermi SitePARTOfficeOctoberDanielDTNTopL.David PaulScale

  5. Federal Asian Pacific American Council - New Mexico Chapter Albuquerque, NM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental Assessments (EA)Budget » FY 2014FacilitiesSheet2February28Federal|

  6. MagViz Bottled Liquid Scanner at Albuquerque International Sunport

    ScienceCinema (OSTI)

    Surko, Stephen; Dennis, Steve; Espy, Michelle

    2014-08-12T23:59:59.000Z

    The next-generation bottled liquid scanner, MagViz BLS, is demonstrated at the Albuquerque International Sunport, New Mexico

  7. albuquerque operations office: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in the TFTR vacuum 34 18 th IEEENPSS Symposium on Fusion Engineering October 25 --29, 1999, Albuquerque, New Mexico Plasma Physics and Fusion Websites Summary: 18 th IEEENPSS...

  8. albuquerque convention center: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In regards Santhanam, Balu 12 IEEENPSS Symposium on Fusion Engineering October 25 29, 1999, Albuquerque, New Mexico Plasma Physics and Fusion Websites Summary: 18 th IEEENPSS...

  9. New airport liquid analysis system undergoes testing at Albuquerque...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New airport liquid analysis system New airport liquid analysis system undergoes testing at Albuquerque International Sunport A new tool that distinguishes potential-threat liquids...

  10. Sandia National Laboratories: Locations: Albuquerque, New Mexico: Life in

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol HomeFacebook Twitter YouTube Flickr RSS Top DefenseIntegrated

  11. Sandia National Laboratories: Locations: Albuquerque, New Mexico: Visiting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol HomeFacebook Twitter YouTube Flickr RSS Top DefenseIntegratedSandia/New

  12. Sandia National Laboratories: Locations: Albuquerque, New Mexico: Life in

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiationImplementingnpitche Home About npitcheSandianPrograms:Co-ops: GoLatest News

  13. Sandia National Laboratories: Locations: Albuquerque, New Mexico: Life in

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiationImplementingnpitche Home About npitcheSandianPrograms:Co-ops: GoLatest

  14. Sandia National Laboratories: Locations: Albuquerque, New Mexico: Life in

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiationImplementingnpitche Home About npitcheSandianPrograms:Co-ops:

  15. November 13-15, 2006 17th TOFE, Albuquerque 1

    E-Print Network [OSTI]

    Raffray, A. Ren

    November 13-15, 2006 17th TOFE, Albuquerque 1 HAPL A Self-Cooled Liquid Breeder Blanket for a Laser-15, 2006 17th TOFE, Albuquerque 3 HAPL The HAPL Program Aims at Developing IFE Based on Lasers, Direct of laser ports Maintenance performed from the top by removing the upper shield and the blanket modules

  16. Calendar year 2004 annual site environmental report:Sandia National Laboratories, Albuquerque, New Mexico.

    SciTech Connect (OSTI)

    Montoya, Amber L.; Goering, Teresa Lynn; Wagner, Katrina; Koss, Susan I.; Salinas, Stephanie A.

    2005-09-01T23:59:59.000Z

    Sandia National Laboratories, New Mexico (SNL/NM) is a government-owned, contractor-operated facility owned by the U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA) and managed by the Sandia Site Office (SSO), Albuquerque, New Mexico. Sandia Corporation, a wholly-owned subsidiary of Lockheed Martin Corporation, operates SNL/NM. This annual report summarizes data and the compliance status of Sandia Corporation's environmental protection and monitoring programs through December 31, 2004. Major environmental programs include air quality, water quality, groundwater protection, terrestrial surveillance, waste management, pollution prevention (P2), environmental restoration (ER), oil and chemical spill prevention, and the National Environmental Policy Act (NEPA). Environmental monitoring and surveillance programs are required by DOE Order 450.1, Environmental Protection Program (DOE 2005) and DOE Order 231.1A, Environment, Safety, and Health Reporting (DOE 2004a). (DOE 2004a).

  17. 18 th IEEE/NPSS Symposium on Fusion Engineering October 25 --29, 1999, Albuquerque, New Mexico

    E-Print Network [OSTI]

    18 th IEEE/NPSS Symposium on Fusion Engineering October 25 -- 29, 1999, Albuquerque, New Mexico, 1999, Albuquerque, New Mexico System Configuration A ~ 600 gram TFTR limiter tile (Fig. 1.) which

  18. IEEE/NPSS Symposium on Fusion Engineering October 25 29, 1999, Albuquerque, New Mexico

    E-Print Network [OSTI]

    18 th IEEE/NPSS Symposium on Fusion Engineering October 25 29, 1999, Albuquerque, New Mexico, 1999, Albuquerque, New Mexico System Configuration A ~ 600 gram TFTR limiter tile (Fig. 1.) which

  19. 1995 Site environmental report Sandia National Laboratories, Albuquerque, New Mexico

    SciTech Connect (OSTI)

    Shyr, L.J.; Duncan, D. [eds.] [eds.; Sanchez, R.

    1996-09-01T23:59:59.000Z

    This 1995 report contains data from routine radiological and non-radiological environmental monitoring activities. Summaries of significant environmental compliance programs in progress, such as National Environmental Policy Act documentation, environmental permits, environmental restoration and various waste management programs at Sandia National Laboratories in Albuquerque, New Mexico, are included.

  20. albuquerque nm 08mar01: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    which for the Ashtech G12TM and NovAtel PowerPack OEM2 (with special Precise Velocity (PV) firmware) receivers. In order Calgary, University of 49 IEEENPSS Symposium on Fusion...

  1. E-Print Network 3.0 - albuquerque nm measurement Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environmental Management and Restoration Technologies 33 A. Reservoir Effects of Stream Channels DAM IMPACTS ON AND RESTORATION OF AN ALLUVIAL RIVER Summary: and Wildlife...

  2. 2009 fault tolerance for extreme-scale computing workshop, Albuquerque, NM - March 19-20, 2009.

    SciTech Connect (OSTI)

    Katz, D. S.; Daly, J.; DeBardeleben, N.; Elnozahy, M.; Kramer, B.; Lathrop, S.; Nystrom, N.; Milfeld, K.; Sanielevici, S.; Scott, S.; Votta, L.; Louisiana State Univ.; Center for Exceptional Computing; LANL; IBM; Univ. of Illinois; Shodor Foundation; Pittsburgh Supercomputer Center; Texas Advanced Computing Center; ORNL; Sun Microsystems

    2009-02-01T23:59:59.000Z

    This is a report on the third in a series of petascale workshops co-sponsored by Blue Waters and TeraGrid to address challenges and opportunities for making effective use of emerging extreme-scale computing. This workshop was held to discuss fault tolerance on large systems for running large, possibly long-running applications. The main point of the workshop was to have systems people, middleware people (including fault-tolerance experts), and applications people talk about the issues and figure out what needs to be done, mostly at the middleware and application levels, to run such applications on the emerging petascale systems, without having faults cause large numbers of application failures. The workshop found that there is considerable interest in fault tolerance, resilience, and reliability of high-performance computing (HPC) systems in general, at all levels of HPC. The only way to recover from faults is through the use of some redundancy, either in space or in time. Redundancy in time, in the form of writing checkpoints to disk and restarting at the most recent checkpoint after a fault that cause an application to crash/halt, is the most common tool used in applications today, but there are questions about how long this can continue to be a good solution as systems and memories grow faster than I/O bandwidth to disk. There is interest in both modifications to this, such as checkpoints to memory, partial checkpoints, and message logging, and alternative ideas, such as in-memory recovery using residues. We believe that systematic exploration of these ideas holds the most promise for the scientific applications community. Fault tolerance has been an issue of discussion in the HPC community for at least the past 10 years; but much like other issues, the community has managed to put off addressing it during this period. There is a growing recognition that as systems continue to grow to petascale and beyond, the field is approaching the point where we don't have any choice but to address this through R&D efforts.

  3. New Whole-House Solutions Case Study: Artistic Homes, Albuquerque, NM

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of Contamination in Many DevilsForumEngines |New Technology forDepartment ofNewCountry

  4. DOE Challenge Home Case Study, Palo Duro Homes, Inc., Albuquerque, NM, Production

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube| Department of Energy -StateOffshoreFuel Cycle | DepartmentInnovation |Palo

  5. DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Albuquerque, NM |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube| Department ofDepartment of EnergyCustom Home |RIProduction HomeDepartment

  6. DOE Zero Energy Ready Home Case Study 2013: Palo Duro Homes, Inc., Albuquerque, NM

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"WaveInteractionsMaterials | DepartmentEnergyNew Town

  7. DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Albuquerque, NM |

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO OverviewAttachments4 ChairsEnergy DOEHeatEnergyInc.,| Department

  8. Michaela G. Farr and Joshua S. Stein Sandia National Laboratory, Albuquerque, NM, 87185, United States

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHighand Retrievals fromprocess used in mining -MODERN GRIDStewart!Spatial

  9. Excerpts from the FAPAC Constitution and Bylaws Modified and...

    National Nuclear Security Administration (NNSA)

    Us Our Locations Albuquerque Complex Federal Asian Pacific American Council - New Mexico Chapter Albuquerque, NM Constitution And Bylaws Excerpts from the FAPAC...

  10. Microsoft PowerPoint - How To Do Business with DOE Albuquerque...

    Broader source: Energy.gov (indexed) [DOE]

    Small Business Networking Event Albuquerque, New Mexico February 1, 2012 Office of Small and Disadvantaged Business Utilization (OSDBU) Office of Small and Disadvantaged Business...

  11. 1992 Environmental monitoring report, Sandia National Laboratories, Albuquerque, New Mexico

    SciTech Connect (OSTI)

    Culp, T.; Cox, W.; Hwang, H.; Irwin, M.; Jones, A.; Matz, B.; Molley, K.; Rhodes, W.; Stermer, D.; Wolff, T.

    1993-09-01T23:59:59.000Z

    This 1992 report contains monitoring data from routine radiological and nonradiological environmental surveillance activities. summaries of significant environmental compliance programs in progress, such as National Environmental Policy Act documentation, environmental permits, envirorunental restoration, and various waste management programs for Sandia National Laboratories in Albuquerque, New Mexico, are included. The maximum offsite dose impact was calculated to be 0.0034 millirem. The total population within a 50-mile radius of Sandia National Laboratories/New Mexico received an estimated collective dose of 0.019 person-rem during 1992 from the laboratories` operations. As in the previous year, the 1992 operations at Sandia National Laboratories/New Mexico had no discernible impact on the general public or on the environment.

  12. 1994 Site Environmental Report Sandia National Laboratories Albuquerque, New Mexico

    SciTech Connect (OSTI)

    Shyr, L.J.; Wiggins, T.; White, B.B. [eds.] [and others

    1995-09-01T23:59:59.000Z

    This 1994 report contains data from routine radiological and nonradiological environmental monitoring activities. Summaries of significant environmental compliance programs in progress, such as National Environmental Policy Act documentation, environmental permits, environmental restoration, and various waste management programs for Sandia National Laboratories in Albuquerque, New Mexico, are included. The maximum off-site dose impact from air emissions was calculated to be 1.5 x 10{sup -4} millirem. The total population within a 50-mile radius of Sandia National Laboratories/New Mexico received an estimated collective dose of 0.012 person-rem during 1994 from the laboratories` operations. This report is prepared for the U.S. Department of Energy in compliance with DOE Order 5400.1.

  13. 2820 Inorg. Chem. 1988, 27, 2820-2825 Contribution from the Fuel Sciences Division, Sandia National Laboratories, Albuquerque, New Mexico 87185,

    E-Print Network [OSTI]

    Shelnutt, John A.

    Laboratories, Albuquerque, New Mexico 87185, and Institut de Chimie Physique, Ecole Polytechnique Federale de

  14. Sandia/New Mexico's host, the City of Albuquerque, has a long...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SandiaNew Mexico's host, the City of Albuquerque, has a long-term goal of Zero Waste to the Landfill by 2030. Zero Waste is generally accepted to mean greater than 90% of waste...

  15. 1995 annual epidemiologic surveillance report for Sandia National Laboratory-Albuquerque

    SciTech Connect (OSTI)

    NONE

    1995-12-31T23:59:59.000Z

    The US Department of Energy`s (DOE`s) conduct of epidemiologic surveillance provides an early warning system for health problems among workers. This program monitors illnesses and injuries that result in an absence of five or more consecutive workdays, occupational injuries and illnesses, and disabilities and deaths among current workers. This report provides a summary of epidemiologic surveillance data collected from the Sandia National Laboratory-Albuquerque (SNL-AL) from January 1, 1995 through December 31, 1995. The data were collected by a coordinator at SNL-AL and submitted to the Epidemiologic Surveillance Data Center, located at Oak Ridge Institute for Science and Education, where quality control procedures and data analyses were carried out. The annual report for 1995 has been redesigned from reports for previous years. Most of the information in the previous reports is also in this report, but some material now appears in the appendices instead of the main body of the report. The information presented in the main body of the report provides a descriptive analysis of the data collected from the site and the appendices provide more detail. A new section of the report presents trends in health over time. The Glossary and an Explanation of Diagnostic Categories have been expanded with more examples of diagnoses to illustrate the content of each category. The data presented here apply only to SNL-AL. The DOE sites are varied, so comparisons of SNL-AL with other DOE sites should be made with caution. It is important to keep in mind that many factors can affect the completeness and accuracy of health information collected at the sites as well as affect patterns of illness and injury observed.

  16. conductivity of Santa Fe Group aquifer systemsediments from the 98th Street core hole. Albuquerque. New Mexico: New

    E-Print Network [OSTI]

    Haneberg, William C.

    systemsediments from the 98th Street core hole. Albuquerque. New Mexico: New Mexico Geology. Vol. 20, pp. 14 Grande Basin, proceedings of the 39th Annual New Mexico Water Conference, Albuquerque. New Mexico. November 3-4.1994: New Mexico Water Re- sources Research Insitute Report No. 200, pp. 37-55. HEYWOOD, C

  17. Verification Survey of Rooms 113, 114, and 208 of the Inhalation Toxicology Laboratory, Lovelace Respiratory Research Institute, Albuquerque, NM

    SciTech Connect (OSTI)

    T.J. Vitkus

    2008-06-25T23:59:59.000Z

    The objectives of the verification survey were to confirm that accessible surfaces of the three laboratories meet the DOEs established criteria for residual contamination. Drain pipes and ductwork were not included within the survey scope.

  18. ARR/18th SOFE Presentation, Albuquerque, NM, October 1999 SiC/SiC Composite for an

    E-Print Network [OSTI]

    Raffray, A. Ren

    performance, high temperature blanket system - Self cooled or dual coolant (He for FW) - LiPb and Li 1999 Input Parameters Power - Max. Heat Load = 1.5 x ARIES-RS - Total Fusion Power Same as ARIES Maximum Surface Heat Flux (MW/m2 ) 0.71 Average Surface Heat Flux (MW/m2 ) 0.6 Power to the Divertor (MW

  19. DOE Zero Ready Home Case Study: Palo Duro Homes, Most DOE Energy Ready Homes Built, Albuquerque, NM

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"WaveInteractionsMaterials |Production | Zero EnergyExtremeTownPalo Duro

  20. Computer Science Department, University of New Mexico Albuquerque, New Mexico 87131 Phone: 505 277-3112 Fax: 505 277-6927 http://www.cs.unm.edu/~hollan

    E-Print Network [OSTI]

    Mills, Kevin

    UNM NYU Computer Science Department, University of New Mexico Albuquerque, New Mexico 87131 Phone;UNM NYU Computer Science Department, University of New Mexico Albuquerque, New Mexico 87131 Phone: 505 NYU Computer Science Department, University of New Mexico Albuquerque, New Mexico 87131 Phone: 505 277

  1. 1996 Site environmental report Sandia National Laboratories Albuquerque, New Mexico

    SciTech Connect (OSTI)

    Fink, C.H. [ed.] [Sandia National Labs., Albuquerque, NM (United States); Duncan, D. [ed.] [GRAM, Inc., Albuquerque, NM (United States); Sanchez, R. [Jobs Plus, Albuquerque, NM (United States)

    1997-08-01T23:59:59.000Z

    Sandia National Laboratories/New Mexico (SNL/NM) is operated in support of the U.S. Department of Energy (DOE) mission to provide weapon component technology and hardware for national security needs, and to conduct fundamental research and development (R&D) to advance technology in energy research, computer science, waste management, electronics, materials science, and transportation safety for hazardous and nuclear components. In support of this mission, the Environmental Safety and Health (ES&H) Center at SNL/NM conducts extensive environmental monitoring, surveillance, and compliance activities to assist SNL`s line organizations in meeting all applicable environmental regulations applicable to the site including those regulating radiological and nonradiological effluents and emissions. Also herein are included, the status of environmental programs that direct and manage activities such as terrestrial surveillance; ambient air and meteorological monitoring; hazardous, radioactive, and solid waste management; pollution prevention and waste minimization; environmental restoration (ER); oil and chemical spill prevention; and National Environmental Policy Act (NEPA) documentation. This report has been prepared in compliance with DOE order 5400.1, General Environmental Protection.

  2. 2003 Sandia National Laboratories--Albuquerque Annual Illness and Injury Surveillance Report

    SciTech Connect (OSTI)

    U.S. Department of Energy, Office of Health, Safety and Security, Office of Illness and Injury Prevention Programs

    2007-05-23T23:59:59.000Z

    Annual Illness and Injury Surveillance Program report for 2003 for Sandia National Laboratories-Albuquerque. The U.S. Department of Energys (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The IISP monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.

  3. Albuquerque ROCKYMOUNTAINS

    E-Print Network [OSTI]

    Lee, Cin-Ty Aeolus

    Shiprock Saint Johns Clifton Tularosa Hobbs Brownfield Douglas Dalhart El Paso 108° 106° 104° 37° 36° 35

  4. Preliminary safety analysis report for the Auxiliary Hot Cell Facility, Sandia National Laboratories, Albuquerque, New Mexico

    SciTech Connect (OSTI)

    OSCAR,DEBBY S.; WALKER,SHARON ANN; HUNTER,REGINA LEE; WALKER,CHERYL A.

    1999-12-01T23:59:59.000Z

    The Auxiliary Hot Cell Facility (AHCF) at Sandia National Laboratories, New Mexico (SNL/NM) will be a Hazard Category 3 nuclear facility used to characterize, treat, and repackage radioactive and mixed material and waste for reuse, recycling, or ultimate disposal. A significant upgrade to a previous facility, the Temporary Hot Cell, will be implemented to perform this mission. The following major features will be added: a permanent shield wall; eight floor silos; new roof portals in the hot-cell roof; an upgraded ventilation system; and upgraded hot-cell jib crane; and video cameras to record operations and facilitate remote-handled operations. No safety-class systems, structures, and components will be present in the AHCF. There will be five safety-significant SSCs: hot cell structure, permanent shield wall, shield plugs, ventilation system, and HEPA filters. The type and quantity of radionuclides that could be located in the AHCF are defined primarily by SNL/NM's legacy materials, which include radioactive, transuranic, and mixed waste. The risk to the public or the environment presented by the AHCF is minor due to the inventory limitations of the Hazard Category 3 classification. Potential doses at the exclusion boundary are well below the evaluation guidelines of 25 rem. Potential for worker exposure is limited by the passive design features incorporated in the AHCF and by SNL's radiation protection program. There is no potential for exposure of the public to chemical hazards above the Emergency Response Protection Guidelines Level 2.

  5. Michaela G. Farr and Joshua S. Stein Sandia National Laboratory...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    with identical setups located in Albuquerque NM and Orlando, Florida. Index Terms - Photovoltaics, Cooling, Efficiency, Wind Speed. I. INTRODUCTION The performance of a...

  6. NEPA/CERCLA/RCRA integration strategy for Environmental Restoration Program, Sandia National Laboratories, Albuquerque

    SciTech Connect (OSTI)

    Hansen, R.P. (International Technology Corp., Englewood, CO (United States))

    1992-10-01T23:59:59.000Z

    This report addresses an overall strategy for complying with DOE Order 5400.4 which directs that DOE offices and facilities integrate the procedural and documentation requirements of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) and the National Environmental Policy Act (NEPA) wherever practical and appropriate. Integration of NEPA and Resource Conservation and Recovery Act (RCRA) processes is emphasized because RCRA applies to most of the potential release sites at SNL, Albuquerque. NEPA, CERCLA, and RCRA precesses are comparatively analyzed and special integration issues are discussed. Three integration strategy options are evaluated and scheduling and budgeting needs are identified. An annotated outline of an integrated project- or site-specific NEPA/RCRA RFI/CMS EIS or EA is included as an appendix.

  7. Evaluation of Machine Guarding Pilot course taught in Albuquerque, New Mexico, March 25--27, 1992

    SciTech Connect (OSTI)

    Wright, T.S.

    1992-05-01T23:59:59.000Z

    This section summarizes trainee evaluations for the Safety Training Section course, Machine Guarding which was conducted at Sandia National Laboratory, in Albuquerque, New Mexico. This class was the second pilot course taught. This report summarizes the quantitative course evaluations that trainees provided upon completion of the course, and provides a transcript of the trainees' written comments. Numeric course ratings were lower than normal and reflect problems that were encountered in this class. The course and knowledge gained by the trainees exceeded some of the students' expectations of the course and results from the final examination indicated that the majority of students gained significant knowledge from the course while others were distracted and gained little from the course. A graph showing the distribution is included.

  8. Evaluation of Machine Guarding Pilot course taught in Albuquerque, New Mexico, March 25--27, 1992

    SciTech Connect (OSTI)

    Wright, T.S.

    1992-05-01T23:59:59.000Z

    This section summarizes trainee evaluations for the Safety Training Section course, Machine Guarding which was conducted at Sandia National Laboratory, in Albuquerque, New Mexico. This class was the second pilot course taught. This report summarizes the quantitative course evaluations that trainees provided upon completion of the course, and provides a transcript of the trainees` written comments. Numeric course ratings were lower than normal and reflect problems that were encountered in this class. The course and knowledge gained by the trainees exceeded some of the students` expectations of the course and results from the final examination indicated that the majority of students gained significant knowledge from the course while others were distracted and gained little from the course. A graph showing the distribution is included.

  9. Alternative Fueling Station Locator App Provides Info at Your Fingertips |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The Future of1Albuquerque, NM -Alicia Moulton About UsAll27,Energy

  10. Comprehensive Baseline Environmental Audit of the Inhalation Toxicology Research Institute, Albuquerque, New Mexico

    SciTech Connect (OSTI)

    Not Available

    1993-06-01T23:59:59.000Z

    This report documents the results of the Comprehensive Baseline Environmental Audit conducted at the Inhalation Toxicology Research Institute (ITRI) in Albuquerque, New Mexico. The scope of the audit at the ITRI was comprehensive, addressing environmental activities in the technical areas of air; soils, sediments, and biota; surface water/drinking water; groundwater; waste management; toxic and chemical materials; quality assurance; radiation; inactive waste sites; environmental management; and environmental monitoring programs. Specifically assessed was the compliance of ITRI operations and activities with Federal, state, and local regulations; DOE Orders; internal operating standards; and best management practices. Onsite activities included inspection of ITRI facilities and operations; review of site documents; interviews with DOE and contractor personnel, as well as representatives from state regulatory agencies; and reviews of previous appraisals. Using these sources of information, the environmental audit team developed findings, which fell into two general categories: compliance findings and best management practice findings. Each finding also identifies apparent causal factor(s) that contributed to the finding and will assist line management in developing ``root causes`` for implementing corrective actions.

  11. Office of the Vice President for Health Sciences Health Sciences and Services Bldg. Albuquerque, NM 87131-5001 Phone (505) 272-5849 Fax (505) 272-3601

    E-Print Network [OSTI]

    Maccabe, Barney

    direction, existing space needs and facility conditions, alternate building development strategies were and private partners to create an environment where students pursue excellence, where innovative research, Physical Plant Department Jeff Easton Chief Executive Officer, Lobo Energy,Inc. Larry Schuster Engineer

  12. Proceedings of the IEEE International Conference on Robotics and Automation, April 21-27 1997, Albuquerque, NM. The Dynamics of an Articulated Forestry Machine and its Applications

    E-Print Network [OSTI]

    Papadopoulos, Evangelos

    of complexity are devel- oped to help in designing an effective coordinated controller in Cartesian spaceProceedings of the IEEE International Conference on Robotics and Automation, April 21-27 1997 base degrees-of-freedom due to the machine's compliant tires. Techniques and experiments designed

  13. Process Knowledge Characterization of Radioactive Waste at the Classified Waste Landfill Remediation Project Sandia National Laboratories, Albuquerque, New Mexico

    SciTech Connect (OSTI)

    DOTSON,PATRICK WELLS; GALLOWAY,ROBERT B.; JOHNSON JR,CARL EDWARD

    1999-11-03T23:59:59.000Z

    This paper discusses the development and application of process knowledge (PK) to the characterization of radioactive wastes generated during the excavation of buried materials at the Sandia National Laboratories/New Mexico (SNL/NM) Classified Waste Landfill (CWLF). The CWLF, located in SNL/NM Technical Area II, is a 1.5-acre site that received nuclear weapon components and related materials from about 1950 through 1987. These materials were used in the development and testing of nuclear weapon designs. The CWLF is being remediated by the SNL/NM Environmental Restoration (ER) Project pursuant to regulations of the New Mexico Environment Department. A goal of the CWLF project is to maximize the amount of excavated materials that can be demilitarized and recycled. However, some of these materials are radioactively contaminated and, if they cannot be decontaminated, are destined to require disposal as radioactive waste. Five major radioactive waste streams have been designated on the CWLF project, including: unclassified soft radioactive waste--consists of soft, compatible trash such as paper, plastic, and plywood; unclassified solid radioactive waste--includes scrap metal, other unclassified hardware items, and soil; unclassified mixed waste--contains the same materials as unclassified soft or solid radioactive waste, but also contains one or more Resource Conservation and Recovery Act (RCRA) constituents; classified radioactive waste--consists of classified artifacts, usually weapons components, that contain only radioactive contaminants; and classified mixed waste--comprises radioactive classified material that also contains RCRA constituents. These waste streams contain a variety of radionuclides that exist both as surface contamination and as sealed sources. To characterize these wastes, the CWLF project's waste management team is relying on data obtained from direct measurement of radionuclide activity content to the maximum extent possible and, in cases where direct measurement is not technically feasible, from accumulated PK of the excavated materials.

  14. 1998 Annual Site Environmental Report Sandia National Laboratories, Albuquerque, New Mexico

    SciTech Connect (OSTI)

    Duncan, D.K.; Fink, C.H.; Sanchez, R.V.

    1999-09-01T23:59:59.000Z

    Sandia National Laboratories/New Mexico (SNL/NM) is operated in support of the US Department of Energy (DOE) mission to provide weapon component technology and hardware for national security needs. SNL/NM also conducts fundamental research and development to advance technology in energy research, computer science, waste management, microelectronics, materials science, and transportation safety for hazardous and nuclear components. In support of SNL's mission, the Environment, Safety and Health (ES&H) Center and the Environmental Restoration (ER) Project at SNL/NM have established extensive environmental programs to assist SNL's line organizations in meeting all applicable local, State, and Federal environmental regulations and DOE requirements. This annual report for calendar year 1998 (CY98) summarizes the compliance status of environmental regulations applicable to SNL site operations. Environmental program activities include terrestrial surveillance; ambient air and meteorological monitoring hazardous, radioactive, and solid waste management; pollution prevention and waste minimization; environmental remediation; oil and chemical spill prevention; and National Environmental Policy Act (NEPA) activities. This report has been prepared in compliance with DOE Order 5400.1, General Environmental Protection Program (DOE 1990).

  15. Evaluation of machine guarding pilot course taught in Albuquerque, New Mexico, December 9, 1991--December 13, 1991

    SciTech Connect (OSTI)

    Wright, T.S.

    1992-03-01T23:59:59.000Z

    This report summarizes trainee evaluations for the Safety Training Section course, Machine Guarding which was conducted December 9--13 at Sandia National Laboratory, in Albuquerque, New Mexico. This class was the first pilot course taught. Additionally, this report summarizes the quantitative course evaluations that trainees provided upon completion of the course. Included is a transcript of the trainees' written comments. Numeric course ratings were generally positive and show that the course material and instruction were very effective. Written comments supported the positive numeric ratings. The course content and knowledge gained by the trainees exceeded most of the students' expectations of the course. Results from the final examination showed that students gained significant knowledge from the course.

  16. Evaluation of machine guarding pilot course taught in Albuquerque, New Mexico, December 9, 1991--December 13, 1991

    SciTech Connect (OSTI)

    Wright, T.S.

    1992-03-01T23:59:59.000Z

    This report summarizes trainee evaluations for the Safety Training Section course, Machine Guarding which was conducted December 9--13 at Sandia National Laboratory, in Albuquerque, New Mexico. This class was the first pilot course taught. Additionally, this report summarizes the quantitative course evaluations that trainees provided upon completion of the course. Included is a transcript of the trainees` written comments. Numeric course ratings were generally positive and show that the course material and instruction were very effective. Written comments supported the positive numeric ratings. The course content and knowledge gained by the trainees exceeded most of the students` expectations of the course. Results from the final examination showed that students gained significant knowledge from the course.

  17. DOE Zero Energy Ready Home Case Study: Palo Duro Homes Inc., Albuquerque,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"WaveInteractionsMaterials |Production | DepartmentProduction HomeNM,

  18. Annual Site Environmental Report Sandia National Laboratories, Albuquerque, New Mexico, Calendar year 2007

    SciTech Connect (OSTI)

    Agogino, Karen [USDOE, NNSA/SSO; Sanchez, Rebecca [Sandia Corp., Albuquerque, NM (US)

    2008-09-30T23:59:59.000Z

    Sandia National Laboratories, New Mexico (SNL/NM) is a government-owned/contractor-operated facility. Sandia Corporation (Sandia), a wholly owned subsidiary of Lockheed Martin Corporation, manages and operates the laboratory for the U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA). The DOE/NNSA Sandia Site Office (SSO) administers the contract and oversees contractor operations at the site. This annual report summarizes data and the compliance status of Sandia Corporations environmental protection and monitoring programs through December 31, 2007. Major environmental programs include air quality, water quality, groundwater protection, terrestrial surveillance, waste management, pollution prevention (P2), environmental restoration (ER), oil and chemical spill prevention, and implementation of the National Environmental Policy Act (NEPA). Environmental monitoring and surveillance programs are required by DOE Order 450.1, Environmental Protection Program (DOE 2007a) and DOE Manual 231.1-1A, Environment, Safety, and Health Reporting (DOE 2007).

  19. SciTech Connect:

    Office of Scientific and Technical Information (OSTI)

    States) Albany Research Center (ARC), Albany, OR (United States) Albuquerque Complex - NNSA Albuquerque Operations Office, Albuquerque, NM (United States) Amarillo National...

  20. Vegetation study in support of the design and optimization of vegetative soil covers, Sandia National Laboratories, Albuquerque, New Mexico.

    SciTech Connect (OSTI)

    Peace, Gerald (Jerry) L.; Goering, Timothy James (GRAM inc., Albuquerque, NM); Knight, Paul J. (Marron and Associates, Albuquerque, NM); Ashton, Thomas S. (Marron and Associates, Albuquerque, NM)

    2004-11-01T23:59:59.000Z

    A vegetation study was conducted in Technical Area 3 at Sandia National Laboratories, Albuquerque, New Mexico in 2003 to assist in the design and optimization of vegetative soil covers for hazardous, radioactive, and mixed waste landfills at Sandia National Laboratories/New Mexico and Kirtland Air Force Base. The objective of the study was to obtain site-specific, vegetative input parameters for the one-dimensional code UNSAT-H and to identify suitable, diverse native plant species for use on vegetative soil covers that will persist indefinitely as a climax ecological community with little or no maintenance. The identification and selection of appropriate native plant species is critical to the proper design and long-term performance of vegetative soil covers. Major emphasis was placed on the acquisition of representative, site-specific vegetation data. Vegetative input parameters measured in the field during this study include root depth, root length density, and percent bare area. Site-specific leaf area index was not obtained in the area because there was no suitable platform to measure leaf area during the 2003 growing season due to severe drought that has persisted in New Mexico since 1999. Regional LAI data was obtained from two unique desert biomes in New Mexico, Sevilletta Wildlife Refuge and Jornada Research Station.

  1. Sandia Energy - EC Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Swift report-id SAND2010-5624A year 2010 event International High-Level Radioactive Waste Management Conference location Albuquerque, NM The U.S. is currently re-evaluating the...

  2. Albuquerque Operations Office

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling Corp -KWatertown Arsenal'.I Y.it !D;rC. 1.'_I%r

  3. The Western States: Profound Diversity But Severe Segregation for Latino Students

    E-Print Network [OSTI]

    Kucsera, John; Flaxman, Greg

    2012-01-01T23:59:59.000Z

    Oxnard-Thousand Oaks-Ventura, CA Albuquerque, NM Stockton,Oxnard-Thousand Oaks-Ventura, CA Albuquerque, NM Stockton,Oxnard-Thousand Oaks-Ventura, CA Albuquerque, NM Stockton,

  4. Library Locations Locations other than Main Library

    E-Print Network [OSTI]

    Library Locations Locations other than Main Library Example: Feminist Studies HQ1410 .U54 2009 University of California, Santa Barbara Library www.library.ucsb.edu Updated 3-2014 A - B.......................................6 Central M - N..................................................Arts Library (Music Building) P

  5. Fabrication of 10nm diameter carbon nanopores

    SciTech Connect (OSTI)

    Radenovic, Aleksandra; Trepagnier, Eliane; Csencsits, Roseann; Downing, Kenneth H; Liphardt, Jan

    2008-09-25T23:59:59.000Z

    The addition of carbon to samples, during imaging, presents a barrier to accurate TEM analysis, the controlled deposition of hydrocarbons by a focused electron beam can be a useful technique for local nanometer-scale sculpting of material. Here we use hydrocarbon deposition to form nanopores from larger focused ion beam (FIB) holes in silicon nitride membranes. Using this method, we close 100-200nm diameter holes to diameters of 10nm and below, with deposition rates of 0.6nm per minute. I-V characteristics of electrolytic flow through these nanopores agree quantitatively with a one dimensional model at all examined salt concentrations.

  6. I I

    Office of Scientific and Technical Information (OSTI)

    Peery Sandia National Laboratories Albuquerque, NM Prof. M.S. Ingber University of New Mexico Albuquerque, NM Abstract Velocity boundary conditions for the vorticity form of the...

  7. The University of New Mexico MSC05 3345 1 University of New Mexico Albuquerque, NM 87131-0001 Phone 505.277.5824 Fax 505.277.5544 www.unm.edu Division of Human Resources

    E-Print Network [OSTI]

    New Mexico, University of

    be accessed 24 hours a day, 7 days a week by logging on to https://my.unm.edu. Changes made during Open insurance plans. Starting July 2010, the Division of Human Resources will contract an external company

  8. Power and Performance of Native and Java Benchmarks on 130nm to 32nm Process Technologies

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Power and Performance of Native and Java Benchmarks on 130nm to 32nm Process Technologies Hadi with chip power reduc- tions. This paper examines how well process technology and mi- croarchitecture delivered on this assumption. This paper evalu- ates power and performance of native and Java workloads

  9. Hydrocarbon-free resonance transition 795 nm rubidium laser

    E-Print Network [OSTI]

    Wu, Sheldon Shao Quan

    2009-01-01T23:59:59.000Z

    transition 795-nm rubidium laser," Opt. Lett. 32, 2423- S.transition 795- nm rubidium laser using 3 He buffer gas",transition 795-nm Rubidium laser with He buffer gas" (

  10. Reversible micromachining locator

    DOE Patents [OSTI]

    Salzer, L.J.; Foreman, L.R.

    1999-08-31T23:59:59.000Z

    This invention provides a device which includes a locator, a kinematic mount positioned on a conventional tooling machine, a part carrier disposed on the locator and a retainer ring. The locator has disposed therein a plurality of steel balls, placed in an equidistant position circumferentially around the locator. The kinematic mount includes a plurality of magnets which are in registry with the steel balls on the locator. In operation, a blank part to be machined is placed between a surface of a locator and the retainer ring (fitting within the part carrier). When the locator (with a blank part to be machined) is coupled to the kinematic mount, the part is thus exposed for the desired machining process. Because the locator is removably attachable to the kinematic mount, it can easily be removed from the mount, reversed, and reinserted onto the mount for additional machining. Further, the locator can likewise be removed from the mount and placed onto another tooling machine having a properly aligned kinematic mount. Because of the unique design and use of magnetic forces of the present invention, positioning errors of less than 0.25 micrometer for each machining process can be achieved. 7 figs.

  11. Reversible micromachining locator

    DOE Patents [OSTI]

    Salzer, Leander J. (Los Alamos, NM); Foreman, Larry R. (Los Alamos, NM)

    1999-01-01T23:59:59.000Z

    This invention provides a device which includes a locator, a kinematic mount positioned on a conventional tooling machine, a part carrier disposed on the locator and a retainer ring. The locator has disposed therein a plurality of steel balls, placed in an equidistant position circumferentially around the locator. The kinematic mount includes a plurality of magnets which are in registry with the steel balls on the locator. In operation, a blank part to be machined is placed between a surface of a locator and the retainer ring (fitting within the part carrier). When the locator (with a blank part to be machined) is coupled to the kinematic mount, the part is thus exposed for the desired machining process. Because the locator is removably attachable to the kinematic mount, it can easily be removed from the mount, reversed, and reinserted onto the mount for additional machining. Further, the locator can likewise be removed from the mount and placed onto another tooling machine having a properly aligned kinematic mount. Because of the unique design and use of magnetic forces of the present invention, positioning errors of less than 0.25 micrometer for each machining process can be achieved.

  12. Reversible micromachining locator

    DOE Patents [OSTI]

    Salzer, Leander J. (Los Almos, NM); Foreman, Larry R. (late of Los Alamos, NM)

    2002-01-01T23:59:59.000Z

    A locator with a part support is used to hold a part onto the kinematic mount of a tooling machine so that the part can be held in or replaced in exactly the same position relative to the cutting tool for machining different surfaces of the part or for performing different machining operations on the same or different surfaces of the part. The locator has disposed therein a plurality of steel balls placed at equidistant positions around the planar surface of the locator and the kinematic mount has a plurality of magnets which alternate with grooves which accommodate the portions of the steel balls projecting from the locator. The part support holds the part to be machined securely in place in the locator. The locator can be easily detached from the kinematic mount, turned over, and replaced onto the same kinematic mount or another kinematic mount on another tooling machine without removing the part to be machined from the locator so that there is no need to touch or reposition the part within the locator, thereby assuring exact replication of the position of the part in relation to the cutting tool on the tooling machine for each machining operation on the part.

  13. Locating Heat Recovery Opportunities

    E-Print Network [OSTI]

    Waterland, A. F.

    1981-01-01T23:59:59.000Z

    Basic concepts of heat recovery are defined as they apply to the industrial community. Methods for locating, ranking, and developing heat recovery opportunities are presented and explained. The needs for useful heat 'sinks' are emphasized as equal...

  14. Locating Heat Recovery Opportunities

    E-Print Network [OSTI]

    Waterland, A. F.

    1981-01-01T23:59:59.000Z

    Basic concepts of heat recovery are defined as they apply to the industrial community. Methods for locating, ranking, and developing heat recovery opportunities are presented and explained. The needs for useful heat 'sinks' are emphasized as equal...

  15. Comparison of regularizations of vortex sheet motion Monika Nitsche a,

    E-Print Network [OSTI]

    Krasny, Robert

    , Robert Krasny c a University of New Mexico, Department of Mathematics and Statistics, Albuquerque, NM

  16. 28-nm laser damage testing of LIF

    SciTech Connect (OSTI)

    Foltyn, S.R.; Newman, B.E.

    1981-01-01T23:59:59.000Z

    We have tested several samples of LIF, both single crystal and press forged, for damage resistance to 10-ns 248-nm pulses at 35 pps. The damage thresholds - the highest levels at which no damage could be produced - ranged from 4 to 6 J/cm/sup 2/ although some test sites survived irradiation at approx. 30 J/cm/sup 2/. We observed that bulk damage is the primary failure mechanism in single crystal and press forged samples and that both types exhibit the same resistance to laser damage.

  17. Location Independent Professional Project: A Pilot Study

    SciTech Connect (OSTI)

    Hudson, J.A.; Long, J.P.; Miller, M.M.

    1999-02-01T23:59:59.000Z

    This pilot study project explored the problem of providing access to the nomadic worker who desires to connect a computer through network access points at a number of different locations within the SNL/NM campus as well as outside the campus. The design and prototype development gathered knowledge that may allow a design to be developed that could be extended to a larger number of SNL/NM network drop boxes. The focus was to provide a capability for a worker to access the SNL IRN from a network drop box (e.g. in a conference room) as easily as when accessing the computer network from the office normally used by the worker. Additional study was done on new methods to authenticate the off campus worker, and protect and control access to data.

  18. NON-INVASIVE DETERMINATION OF THE LOCATION AND DISTRIBUTION OF FREE-PHASE DENSE NONAQUEOUS PHASE LIQUIDS (DNAPL) BY SEISMIC REFLECTION TECHNIQUES

    SciTech Connect (OSTI)

    Michael G. Waddell; William J. Domoracki; Tom J. Temples

    2001-05-01T23:59:59.000Z

    This semi-annual technical progress report is for Task 4 site evaluation, Task 5 seismic reflection design and acquisition, and Task 6 seismic reflection processing and interpretation on DOE contact number DE-AR26-98FT40369. The project had planned one additional deployment to another site other than Savannah River Site (SRS) or DOE Hanford. During this reporting period the project had an ASME peer review. The findings and recommendation of the review panel, as well at the project team response to comments, are in Appendix A. After the SUBCON midyear review in Albuquerque, NM and the peer review it was decided that two additional deployments would be performed. The first deployment is to test the feasibility of using non-invasive seismic reflection and AVO analysis as monitoring to assist in determining the effectiveness of Dynamic Underground Stripping (DUS) in removal of DNAPL. Under the rescope of the project, Task 4 would be performed at the Charleston Navy Weapons Station, Charleston, SC and not at the Dynamic Underground Stripping (DUS) project at SRS. The project team had already completed Task 4 at the M-area seepage basin, only a few hundred yards away from the DUS site. Because the geology is the same, Task 4 was not necessary. However, a Vertical Seismic Profile (VSP) was conducted in one well to calibrate the geology to the seismic data. The first deployment to the DUS Site (Tasks 5 and 6) has been completed. Once the steam has been turned off these tasks will be performed again to compare the results to the pre-steam data. The results from the first deployment to the DUS site indicated a seismic amplitude anomaly at the location and depths of the known high concentrations of DNAPL. The deployment to another site with different geologic conditions was supposed to occur during this reporting period. The first site selected was DOE Paducah, Kentucky. After almost eight months of negotiation, site access was denied requiring the selection of another site. An alternate, site the Department of Defense (DOD) Charleston Navy Weapons Station, Charleston, SC was selected in consultation with National Energy Technology Laboratory (NETL) and DOD Navy Facilities Engineering Command Southern Division (NAVFAC) personnel. Tasks 4, 5, and 6 will be performed at the Charleston Navy Weapons Station. Task 4 will be executed twice. The project team had almost completed Task 4 at Paducah before access was denied.

  19. CONTRACTOR REPORT SAND97-2426 Unlimited Release UC-705 Penetration...

    Office of Scientific and Technical Information (OSTI)

    A-220 Albuquerque NM 871 10 Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia is a multiprogram laboratory operated...

  20. 244-nm imaging interferometric lithography A. Frauenglass, S. Smolev,a)

    E-Print Network [OSTI]

    New Mexico, University of

    , decreased feature size and improved circuit design. The National Technology Roadmap for Semiconductors. Brueck Center for High Technology Materials, University of New Mexico, Albuquerque, New Mexico 87106 in lithographic pattern definition, enabling the continuous increase in the functionality and speed of integrated

  1. Photodissociation of the Propargyl (C3D3) Radicals at 248 nm and 193 nm

    SciTech Connect (OSTI)

    Neumark., D.M.; Crider, P.E.; Castiglioni, L.; Kautzman, K.K.

    2009-01-21T23:59:59.000Z

    The photodissociation of perdeuterated propargyl (D{sub 2}CCCD) and propynyl (D{sub 3}CCC) radicals was investigated using fast beam photofragment translational spectroscopy. Radicals were produced from their respective anions by photodetachment at 540 nm and 450 nm (below and above the electron affinity of propynyl). The radicals were then photodissociated by 248 nm or 193 nm light. The recoiling photofragments were detected in coincidence with a time- and position-sensitive detector. Three channels were observed: D{sub 2} loss, CD + C{sub 2}D{sub 2}, and CD{sub 3} + C{sub 2}. Obervation of the D loss channel was incompatible with this experiment and was not attempted. Our translational energy distributions for D{sub 2} loss peaked at nonzero translational energy, consistent with ground state dissociation over small (< 1 eV) exit barriers with respect to separated products. Translational energy distributions for the two heavy channels peaked near zero kinetic energy, indicating dissociation on the ground state in the absence of exit barriers.

  2. The Spectrum of Thorium from 250 nm to 5500 nm: Ritz Wavelengths and Optimized Energy Levels

    E-Print Network [OSTI]

    Redman, Stephen L; Sansonetti, Craig J

    2013-01-01T23:59:59.000Z

    We have made precise observations of a thorium-argon hollow cathode lamp emission spectrum in the region between 350 nm and 1175 nm using a high-resolution Fourier transform spectrometer. Our measurements are combined with results from seven previously published thorium line lists (Giacchetti et al. 1974; Zalubas & Corliss 1974; Zalubas 1976; Palmer & Engleman 1983; Engleman et al. 2003; Lovis & Pepe 2007; Kerber et al. 2008) to re-optimize the energy levels of neutral, singly-, and doubly-ionized thorium (Th I, Th II, and Th III). Using the optimized level values, we calculate accurate Ritz wavelengths for 19679 thorium lines between 250 nm and 5500 nm (40000 1/cm to 1800 1/cm). We have also found 102 new thorium energy levels. A systematic analysis of previous measurements in light of our new results allows us to identify and propose corrections for systematic errors in Palmer & Engleman (1983) and typographical errors and incorrect classifications in Kerber et al. (2008). We also found a la...

  3. Electric current locator

    DOE Patents [OSTI]

    King, Paul E. (Corvallis, OR); Woodside, Charles Rigel (Corvallis, OR)

    2012-02-07T23:59:59.000Z

    The disclosure herein provides an apparatus for location of a quantity of current vectors in an electrical device, where the current vector has a known direction and a known relative magnitude to an input current supplied to the electrical device. Mathematical constants used in Biot-Savart superposition equations are determined for the electrical device, the orientation of the apparatus, and relative magnitude of the current vector and the input current, and the apparatus utilizes magnetic field sensors oriented to a sensing plane to provide current vector location based on the solution of the Biot-Savart superposition equations. Description of required orientations between the apparatus and the electrical device are disclosed and various methods of determining the mathematical constants are presented.

  4. Optimal fault location

    E-Print Network [OSTI]

    Knezev, Maja

    2009-05-15T23:59:59.000Z

    are triggered. Protection system consisting of protection relays and circuit breakers (CBs) will operate in order to de-energize faulted line. Different Intelligent Electronic Devices (IEDs) located in substations for the purpose of monitoring... in the control center by an operator who will mark fault event in a spreadsheet and inform other staff responsible for dealing with fault analysis and repair such as protection group or maintenance respectively. Protective relaying staff will be ready...

  5. Optimal fault location

    E-Print Network [OSTI]

    Knezev, Maja

    2008-10-10T23:59:59.000Z

    are triggered. Protection system consisting of protection relays and circuit breakers (CBs) will operate in order to de-energize faulted line. Different Intelligent Electronic Devices (IEDs) located in substations for the purpose of monitoring... in the control center by an operator who will mark fault event in a spreadsheet and inform other staff responsible for dealing with fault analysis and repair such as protection group or maintenance respectively. Protective relaying staff will be ready...

  6. Alternative Fueling Station Locator

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center Home PageStation LocationsGeneseeValleyPerformance

  7. Alternative Fueling Station Locator

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center Home PageStation LocationsGeneseeValleyPerformance

  8. Final Exam Location and Time

    E-Print Network [OSTI]

    Final Exam Location and Time. Math 162 Fall 2001. Date: Wednesday December 12, 2001. Time: 7:00 pm -9:00 pm. Location: Lambert Fieldhouse...

  9. Final Exam Location and Time

    E-Print Network [OSTI]

    Final Exam Location and Time. Math 161 Fall 2001. Date: Friday December 14, 2001. Time: 8:00 am -10:00 am. Location: Lambert Fieldhouse...

  10. Sandia National Laboratories: Locations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > TheNuclear PressLaboratorySoftware100LifeAnnouncementsLocations

  11. Albuquerque duo wins Supercomputing Challenge

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Challenge Erika DeBenedictis and Tony Huang captured the top prize during the 2008 New Mexico Supercomputing Challenge award ceremony. April 22, 2008 Los Alamos National Laboratory...

  12. Albuquerque duo wins Supercomputing Challenge

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWP TWP RelatedCellulase C. bescii CelA, adefault SignYearYear

  13. NON-INVASIVE DETERMINATION OF THE LOCATION AND DISTRIBUTION OF FREE-PHASE DENSE NONAQUEOUS PHASE LIQUIDS (DNAPL) BY SEISMIC REFLECTION TECHNIQUES

    SciTech Connect (OSTI)

    Michael G. Waddell; William J. Domoracki; Tom J. Temples

    2001-12-01T23:59:59.000Z

    This annual technical progress report is for part of Task 4 (site evaluation), Task 5 (2D seismic design, acquisition, and processing), and Task 6 (2D seismic reflection, interpretation, and AVO analysis) on DOE contact number DE-AR26-98FT40369. The project had planned one additional deployment to another site other than Savannah River Site (SRS) or DOE Hanford Site. After the SUBCON midyear review in Albuquerque, NM, it was decided that two additional deployments would be performed. The first deployment is to test the feasibility of using non-invasive seismic reflection and AVO analysis as a monitoring tool to assist in determining the effectiveness of Dynamic Underground Stripping (DUS) in removal of DNAPL. The second deployment is to the Department of Defense (DOD) Charleston Naval Weapons Station Solid Waste Management Unit 12 (SWMU-12), Charleston, SC to further test the technique to detect high concentrations of DNAPL. The Charleston Naval Weapons Station SWMU-12 site was selected in consultation with National Energy Technology Laboratory (NETL) and DOD Naval Facilities Engineering Command Southern Division (NAVFAC) personnel. Based upon the review of existing data and due to the shallow target depth, the project team collected three Vertical Seismic Profiles (VSP) and an experimental P-wave seismic reflection line. After preliminary data analysis of the VSP data and the experimental reflection line data, it was decided to proceed with Task 5 and Task 6. Three high resolution P-wave reflection profiles were collected with two objectives; (1) design the reflection survey to image a target depth of 20 feet below land surface to assist in determining the geologic controls on the DNAPL plume geometry, and (2) apply AVO analysis to the seismic data to locate the zone of high concentration of DNAPL. Based upon the results of the data processing and interpretation of the seismic data, the project team was able to map the channel that is controlling the DNAPL plume geometry. The AVO analysis located a major amplitude anomaly, which was tested using a Geoprobe{trademark} direct push system. The Geoprobe{trademark} was equipped with a membrane interface probe (MIP) that was interfaced with a sorbent trap/gas chromatograph (GC) system. Both the Photo Ionization Detector (PID) and Electron Capture Detector (ECD) on the GC exceeded the maximum measurement values through the anomaly. A well was installed to collect a water sample. The concentration of chlorinated solvents in the water sample was in excess of 500 ppm. Other amplitude anomalies located directly under an asphalt road were also tested. Both the PID and ECD were zero. It appears that editing of poor quality near-offset traces during data processing caused these anomalies. Not having the full range of source to receiver offset traces in those areas resulted in a false anomaly during AVO analysis. This phenomenon was also observed at the beginning and end of each seismic profile also for the same reason. Based upon the water samples and MIP probes, it appears that surface seismic and AVO analysis were able to detect the area of highest concentration of DNAPL.

  14. Microsoft PowerPoint - WAPA Transmission Developments in NM ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NM, CO, WY, KS, ND, UT, SD & ID Tasked with planning and financing of transmission lines within their respective states RETA has the additional requirement that 30% of...

  15. Generation and use of high power 213 nm and 266 nm laser radiation and tunable 210-400 nm laser radiation with BBO crystal matrix array

    DOE Patents [OSTI]

    Gruen, Dieter M. (Downers Grove, IL)

    2000-01-01T23:59:59.000Z

    A 213 nm laser beam is capable of single photon ablative photodecomposition for the removal of a polymer or biological material substrate. Breaking the molecular bonds and displacing the molecules away from the substrate in a very short time period results in most of the laser photon energy being carried away by the displaced molecules, thus minimizing thermal damage to the substrate. The incident laser beam may be unfocussed and is preferably produced by quintupling the 1064 nm radiation from a Nd:YAG solid state laser, i.e., at 213 nm. In one application, the 213 nm laser beam is expanded in cross section and directed through a plurality of small beta barium borate (BBO) crystals for increasing the energy per photon of the laser radiation directed onto the substrate. The BBO crystals are arranged in a crystal matrix array to provide a large laser beam transmission area capable of accommodating high energy laser radiation without damaging the BBO crystals. The BBO crystal matrix array may also be used with 266 nm laser radiation for carrying out single or multi photon ablative photodecomposition. The BBO crystal matrix array may also be used in an optical parametric oscillator mode to generate high power tunable laser radiation in the range of 210-400 nm.

  16. AIAA-2004-1002 ON ESTIMATION OF COHERENCE IN INFLOW TURBULENCE

    E-Print Network [OSTI]

    Manuel, Lance

    , Austin, TX 78712 2 Wind Energy Technology Department, Sandia National Laboratories, Albuquerque, NM 87185 of the three compo- nents at several locations. The data obtained from spa- tial arrays on three main towers located upwind from the test turbine as well as on two additional towers on either side of the main towers

  17. The Cricket indoor location system

    E-Print Network [OSTI]

    Priyantha, Nissanka Bodhi, 1968-

    2005-01-01T23:59:59.000Z

    Indoor environments present opportunities for a rich set of location-aware applications such as navigation tools for humans and robots, interactive virtual games, resource discovery, asset tracking, location-aware sensor ...

  18. Stable formation of ultrahigh power-density 248 nm channels in Xe cluster targets

    SciTech Connect (OSTI)

    Borisov, Alex B.; Racz, Ervin; Khan, Shahab F.; Poopalasingam, Sankar; McCorkindale, John C.; Boguta, John; Longworth, James W.; Rhodes, Charles K. [Laboratory for X-ray Microimaging and Bioinformatics, Department of Physics, University of Illinois at Chicago, Chicago, IL 60607-7059 (United States); KFKI Research Institute for Particle and Nuclear Physics, EURATOM Association, P.O. Box 49, 1525 Budapest (Hungary)

    2012-07-11T23:59:59.000Z

    The optimization of relativistic and ponderomotive self-channeling of ultra-powerful 248 nm laser pulses launched in underdense plasmas with an appropriate longitudinal gradient in the electron density profile located at the initial stage of the self-channeling leads to (1) stable channel formation and (2) highly efficient power compression producing power densities in the 10{sup 19}-10{sup 20} W/cm{sup 3} range. The comparison of theoretical studies with experimental results involving the correlation of (a) Thomson images of the electron density with (b) x-ray images of the channel morphology demonstrates that more than 90% of the incident 248 nm power can be trapped in stable channels and that this stable propagation can be extended to power levels significantly exceeding the critical power of the self-channeling process.

  19. RF power potential of 45 nm CMOS technology

    E-Print Network [OSTI]

    Putnam, Christopher

    This paper presents the first measurements of the RF power performance of 45 nm CMOS devices with varying device widths and layouts. We find that 45 nm CMOS can deliver a peak output power density of around 140 mW/mm with ...

  20. New Materials for 157 nm Photoresists: Characterization and Properties

    E-Print Network [OSTI]

    Rollins, Andrew M.

    . The current Semiconductor Industry Association (SIA) Roadmap indicates the 100 nm technology node will be reached by 2005; however, many semiconductor manufacturers foresee the need for a technology enabling 100 by 2005. Therefore, 157 nm lithography is viewed as a potential bridge across the gap between optical

  1. Photoelectron Spectroscopy of Anions at 118.2 nm: Observation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    coherent vacuum ultraviolet radiation at 118.2 nm (10.488 eV) by tripling the third harmonic output (355 nm) of a Nd:YAG laser in a XeAr cell. Our study focuses on a set of...

  2. Hydrocarbon-free resonance transition 795 nm rubidium laser

    E-Print Network [OSTI]

    Wu, Sheldon Shao Quan

    2009-01-01T23:59:59.000Z

    and R. J. Beach, "Hydrocarbon-free resonance transition 795-a Reliable Diode-Pumped Hydrocarbon-Free 795-nm Rubidiumand R. J. Beach, "Hydrocarbon-free resonance transition 795-

  3. Life-Cycle Energy Demand of Computational Logic:From High-Performance 32nm CPU to Ultra-Low-Power 130nm MCU

    E-Print Network [OSTI]

    Bol, David; Boyd, Sarah; Dornfeld, David

    2011-01-01T23:59:59.000Z

    Performance 32 nm CPU to Ultra-Low-Power 130 nm MCU Davidboxes and smart phones to ultra-low-power 130 nm MCUs forthe energy demand for ultra-low-power MCUs is completely

  4. Life-Cycle Energy Demand of Computational Logic: From High-Performance 32nm CPU to Ultra-Low-Power 130nm MCU

    E-Print Network [OSTI]

    Bol, David; Boyd, Sarah; Dornfeld, David

    2011-01-01T23:59:59.000Z

    Performance 32 nm CPU to Ultra-Low-Power 130 nm MCU Davidboxes and smart phones to ultra-low-power 130 nm MCUs forthe energy demand for ultra-low-power MCUs is completely

  5. Mobile Alternative Fueling Station Locator

    SciTech Connect (OSTI)

    Not Available

    2009-04-01T23:59:59.000Z

    The Department of Energy's Alternative Fueling Station Locator is available on-the-go via cell phones, BlackBerrys, or other personal handheld devices. The mobile locator allows users to find the five closest biodiesel, electricity, E85, hydrogen, natural gas, and propane fueling sites using Google technology.

  6. Precision zero-home locator

    DOE Patents [OSTI]

    Stone, W.J.

    1983-10-31T23:59:59.000Z

    A zero-home locator includes a fixed phototransistor switch and a moveable actuator including two symmetrical, opposed wedges, each wedge defining a point at which switching occurs. The zero-home location is the average of the positions of the points defined by the wedges.

  7. Single-frequency 1559-nm erbium-doped fiber laser pumped by a 650-nm semiconductor laser

    SciTech Connect (OSTI)

    Giles, C. Randy [Lucent Technologies, Bell Laboratories, Crawford Hill Laboratory, Holmdel, New Jersey 07733-0400 (United States)] Mizrahi, V. [Cienna Corporation, Hanover, Maryland 21076 (United States)

    1997-08-01T23:59:59.000Z

    A single-frequency laser with a 2-cm-length erbium-doped fiber and fiber-grating coupler mirrors was operated successfully with a 650-nm semiconductor pump laser. Laser pump threshold was 0.91-mW and 34-{mu}W output power at 1559 nm was obtained for 6-mW pump power. {copyright} 1997 Optical Society of America

  8. Formation of in-volume nanogratings with sub-100 nm periods in glass by femtosecond laser irradiation

    E-Print Network [OSTI]

    Liao, Yang; Cui, Yun; Qiao, Lingling; Bellouard, Yves; Sugioka, Koji; Cheng, Ya

    2015-01-01T23:59:59.000Z

    We present direct experimental observation of the morphological evolution during the formation of nanogratings with sub-100-nm periods with the increasing number of pulses. Theoretical simulation shows that the constructive interference of the scattering light from original nanoplanes will create an intensity maximum located between the two adjacent nanoplanes, resulting in shortening of the nanograting period by half. The proposed mechanism enables explaining the formation of nanogratings with periods beyond that predicted by the nanoplasmonic model.

  9. A cesium bromide photocathode excited by 405?nm radiation

    SciTech Connect (OSTI)

    Maldonado, J. R.; Cheng, Y. T.; Pease, Fabian W.; Hesselink, L. [Electrical Engineering Department, Stanford University, Stanford, California 94305 (United States); Pianetta, P. [SLAC National Accelerator Center, Menlo Park, CA 94025 (United States)

    2014-07-14T23:59:59.000Z

    In several applications, such as electron beam lithography and X-ray differential phase contrast imaging, there is a need for a free electron source with a current density at least 10?A/cm{sup 2} yet can be shaped with a resolution down to 20?nm and pulsed. Additional requirements are that the source must operate in a practical demountable vacuum (>1e-9?Torr) and be reasonably compact. In prior work, a photocathode comprising a film of CsBr on metal film on a sapphire substrate met the requirements except it was bulky because it required a beam (>10?W/cm{sup 2}) of 257?nm radiation. Here, we describe an approach using a 405?nm laser which is far less bulky. The 405?nm laser, however, is not energetic enough to create color centers in CsBr films. The key to our approach is to bombard the CsBr film with a flood beam of about 1?keV electrons prior to operation. Photoelectron efficiencies in the range of 1001000?nA/mW were demonstrated with lifetimes exceeding 50?h between electron bombardments. We suspect that the electron bombardment creates intraband color centers whence electrons can be excited by the 405?nm photons into the conduction band and thence into the vacuum.

  10. DOE Zero Energy Ready Home Case Study: Palo Duro Homes Inc.,...

    Energy Savers [EERE]

    Palo Duro Homes Inc., Albuquerque, NM, Production DOE Zero Energy Ready Home Case Study: Palo Duro Homes Inc., Albuquerque, NM, Production Case study of a DOE Zero Energy Ready...

  11. Ca II 854.2 nm BISECTORS AND CIRCUMFACULAR REGIONS

    SciTech Connect (OSTI)

    Pietarila, A.; Harvey, J. W. [National Solar Observatory, 950 N. Cherry Avenue, Tucson, AZ 85719 (United States)] [National Solar Observatory, 950 N. Cherry Avenue, Tucson, AZ 85719 (United States)

    2013-02-20T23:59:59.000Z

    Active regions appear bright in Ca II 854.2 nm line core intensity while the surrounding areas, referred to as circumfacular regions, are darker than the active region or the quiet Sun. We use Synoptic Optical Long-term Investigations of the Sun Vector Spectromagnetograph Ca II 854.2 nm data (photospheric and chromospheric full disk magnetograms as well as high spectral resolution Stokes I and V profiles) to study the connection between magnetic canopies, circumfacular regions, and Ca II 854.2 nm bisector amplitudes (spans). The line bisector amplitude is reduced in circumfacular regions, where the 3 minute period power in chromospheric H{alpha} intensity oscillations is also reduced relative to the surrounding quiet Sun. The latter is consistent with magnetic canopies in circumfacular regions suppressing upward propagating steepening acoustic waves. Our results provide further strong evidence for shock waves as the cause of the inverse C-shaped bisector and explain the observed solar cycle variation of the shape and amplitude of Sun-as-a-star Ca II 854.2 nm bisectors.

  12. Fabrication of 10 nm enclosed nanofluidic channels and Zhaoning Yu

    E-Print Network [OSTI]

    Fabrication of 10 nm enclosed nanofluidic channels Han Caoa) and Zhaoning Yu Nanostructure wafers . The nanofluidic channels were further narrowed and sealed by techniques that are based- tremely small nanofluidic structures need to be fabricated and used as matrices for the manipulation

  13. NM Junior College CATALOG YEAR 2009-Transferring from New Mexico

    E-Print Network [OSTI]

    New Mexico, University of

    2010 NM Junior College CATALOG YEAR 2009- 2010 11/9/2010 Transferring from New Mexico Junior College to the University of New Mexico #12;NMJC Course UNM Equivalent Important UNM Phone Numbers................................................................................................... http://advisement.unm.edu/ The University of New Mexico and New Mexico Junior College work closely

  14. Parallel Hypergraph Partitioning for Scientific Computing Karen D. Devine

    E-Print Network [OSTI]

    Bisseling, Rob

    University Dept. of Discrete Algorithms and Math. Dept. of Mathemathics Albuquerque, NM 87185-1111, USA 3508

  15. Synchronized sampling improves fault location

    SciTech Connect (OSTI)

    Kezunovic, M. [Texas A and M Univ., College Station, TX (United States)] [Texas A and M Univ., College Station, TX (United States); Perunicic, B. [Lamar Univ., Beaumont, TX (United States)] [Lamar Univ., Beaumont, TX (United States)

    1995-04-01T23:59:59.000Z

    Transmission line faults must be located accurately to allow maintenance crews to arrive at the scene and repair the faulted section as soon as possible. Rugged terrain and geographical layout cause some sections of power transmission lines to be difficult to reach. In the past, a variety of fault location algorithms were introduced as either an add-on feature in protective relays or stand-alone implementation in fault locators. In both cases, the measurements of current and voltages were taken at one terminal of a transmission line only. Under such conditions, it may become difficult to determine the fault location accurately, since data from other transmission line ends are required for more precise computations. In the absence of data from the other end, existing algorithms have accuracy problems under several circumstances, such as varying switching and loading conditions, fault infeed from the other end, and random value of fault resistance. Most of the one-end algorithms were based on estimation of voltage and current phasors. The need to estimate phasors introduces additional difficulty in high-speed tripping situations where the algorithms may not be fast enough in determining fault location accurately before the current signals disappear due to the relay operation and breaker opening. This article introduces a unique concept of high-speed fault location that can be implemented either as a simple add-on to the digital fault recorders (DFRs) or as a stand-alone new relaying function. This advanced concept is based on the use of voltage and current samples that are synchronously taken at both ends of a transmission line. This sampling technique can be made readily available in some new DFR designs incorporating receivers for accurate sampling clock synchronization using the satellite Global Positioning System (GPS).

  16. Location logistics of industrial facilities

    E-Print Network [OSTI]

    Hammack, William Eugene

    1981-01-01T23:59:59.000Z

    of company intent1ons is not made at the correct time and in the correct manner. 6. Recommend Best Areas for Further Invest1 ations. Once the on-site evaluations have been completed, the 11st of possibilities is reduced still further and only the best... location and site selection. This data was gathered through library research, atten- dance of various industr1al development conferences, sol1citation of mater1als from individuals currently involved with industrial facil1ties location, and various...

  17. EIS-0293: Transfer of Land Tracts Located at Los Alamos National Laboratory, New Mexico

    Broader source: Energy.gov [DOE]

    NNSA/DOE issued an Amended Record of Decision for the EIS for the conveyance of certain additional tracts of land administered by the DOE and located at Los Alamos National Laboratory, Los Alamos, and Santa Fe Counties, NM. Previous decisions and transfers were announced in the 2000 ROD and the 2002 and 2005 Amended RODs.

  18. Building Address Locations -Assumes entire

    E-Print Network [OSTI]

    Guenther, Frank

    Building Address Locations - Assumes entire building unless noted Designation Submit through* 560, 4 BU Crosstown Center 801 Massachusetts Ave Floor 1, 2 BMC BCD Building 800 Harrison Avenue BCD BMC Biosquare III 670 Albany Floors 2, 3, 6, 7 BMC Biosquare III 670 Albany Floors 1, 4, 5, 8 BU Building

  19. Boston, Massachusetts Location: Boston, MA

    E-Print Network [OSTI]

    Prevedouros, Panos D.

    -recovery ventilation and water-source heat pumps Each unit has fresh air ducted independently. Each residence is warmed by a heat pump that taps the Trigen Energy Corporation steam lines that run underneath the street. #12;WallsBoston, Massachusetts #12;Location: Boston, MA Building type(s): Multi-unit residential, Retail 350

  20. Ion transport in sub-5-nm graphene nanopores

    SciTech Connect (OSTI)

    Suk, Myung E.; Aluru, N. R., E-mail: aluru@illinois.edu [Department of Mechanical Science and Engineering, Beckman Institute for Advanced Science and Technology, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801 (United States)

    2014-02-28T23:59:59.000Z

    Graphene nanopore is a promising device for single molecule sensing, including DNA bases, as its single atom thickness provides high spatial resolution. To attain high sensitivity, the size of the molecule should be comparable to the pore diameter. However, when the pore diameter approaches the size of the molecule, ion properties and dynamics may deviate from the bulk values and continuum analysis may not be accurate. In this paper, we investigate the static and dynamic properties of ions with and without an external voltage drop in sub-5-nm graphene nanopores using molecular dynamics simulations. Ion concentration in graphene nanopores sharply drops from the bulk concentration when the pore radius is smaller than 0.9nm. Ion mobility in the pore is also smaller than bulk ion mobility due to the layered liquid structure in the pore-axial direction. Our results show that a continuum analysis can be appropriate when the pore radius is larger than 0.9nm if pore conductivity is properly defined. Since many applications of graphene nanopores, such as DNA and protein sensing, involve ion transport, the results presented here will be useful not only in understanding the behavior of ion transport but also in designing bio-molecular sensors.

  1. Sub-30 nm InAs Quantum-Well MOSFETs with Self-aligned Metal Contacts and Sub-1 nm EOT HfO2 Insulator

    E-Print Network [OSTI]

    del Alamo, Jesús A.

    performance, ability to harmoniously scale down to sub-30 nm gate length dimensions and CMOS. MOSFETs with gate length dimensions in the 20-30 nm range and outstanding electrical characteristics that yields an undercut spacer is etched through highly

  2. Joint microseismic event location with uncertain velocity

    E-Print Network [OSTI]

    Poliannikov, Oleg V.

    2013-01-01T23:59:59.000Z

    We study the problem of the joint location of seismic events using an array of receivers. We show that locating multiple seismic events simultaneously is advantageous compared to the more traditional approaches of locating ...

  3. Energy Department Launches Alternative Fueling Station Locator...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Department Launches Alternative Fueling Station Locator App Energy Department Launches Alternative Fueling Station Locator App November 7, 2013 - 11:16am Addthis As part of...

  4. Asymptotic analysis of an optimal location problem

    E-Print Network [OSTI]

    2003-05-13T23:59:59.000Z

    Asymptotic analysis of an optimal location problem. One considers the problem of optimal location of masses(say production centers) in order to approximate a...

  5. Suppression of high-order-harmonic intensities observed in aligned CO{sub 2} molecules with 1300-nm and 800-nm pulses

    SciTech Connect (OSTI)

    Kato, Kosaku; Minemoto, Shinichirou; Sakai, Hirofumi [Department of Physics, Graduate School of Science, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-0033 (Japan)

    2011-08-15T23:59:59.000Z

    High-order-harmonic generation from aligned N{sub 2}, O{sub 2}, and CO{sub 2} molecules is investigated by 1300-nm and 800-nm pulses. The harmonic intensities of 1300-nm pulses from aligned molecules show harmonic photon energy dependence similar to those of 800-nm pulses. Suppression of harmonic intensity from aligned CO{sub 2} molecules is observed for both 1300- and 800-nm pulses over the same harmonic photon energy range. As the dominant mechanism for the harmonic intensity suppression from aligned CO{sub 2} molecules, the present results support the two-center interference picture rather than the dynamical interference picture.

  6. RAPID/Roadmap/3-NM-f | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f < RAPID‎ | Roadmap Jump to: navigation, searche <c <c <NM-f

  7. RAPID/Roadmap/3-NM-g | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f < RAPID‎ | Roadmap Jump to: navigation, searche <c <c <NM-fg

  8. NM Underground Storage Tank Registration | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer PlantMunhall, Pennsylvania: Energy Resources JumpNEF Advisors LLC JumpNF- Review ofNM

  9. RAPID/Roadmap/12-NM-a | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I GeothermalPotentialBiopowerSolidGenerationMethodInformation TexasTexas)ID-a < RAPID‎ | RoadmapNM-a

  10. RAPID/Roadmap/18-NM-b | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I GeothermalPotentialBiopowerSolidGenerationMethodInformatione < RAPID‎ | RoadmapHI-a <caacNM-b

  11. RAPID/Roadmap/19-NM-a | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I GeothermalPotentialBiopowerSolidGenerationMethodInformatione < RAPID‎ | RoadmapHI-acCA-bfID-aNM-a

  12. RAPID/Roadmap/19-NM-c | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I GeothermalPotentialBiopowerSolidGenerationMethodInformatione < RAPID‎ | RoadmapHI-acCA-bfID-aNM-ac

  13. GeoLectric Power Company NM LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump1946865°,Park, Texas:Webinars/PuestaGenevaGeoLectric Power Company NM LLC

  14. Photofragment Translational Spectroscopy of Propargyl Radicals at 248 nm

    SciTech Connect (OSTI)

    Goncher, S.J.; Moore, D.T.; Sveum, N.E.; Neumark, D.M.

    2007-12-21T23:59:59.000Z

    The photodissociation of propargyl radical, C{sub 3}H{sub 3}, and its perdeuterated isotopolog was investigated using photofragment translational spectroscopy. Propargyl radicals were produced by 193 nm photolysis of allene entrained in a molecular beam expansion, and then photodissociated at 248 nm. photofragment time-of-flight spectra were measured at a series of laboratory angles using electron impact ionization coupled to a mass spectrometer. Data for ion masses corresponding to C{sub 3}H{sub 2}{sup +}, C{sub 3}H{sup +}, C{sub 3}{sup +}, and the analogous deuterated species show that both H and H{sub 2} loss occur. The translational energy distributions for these processes have average values = 5.7 and 15.9 kcal/mol, respectively, and are consistent with dissociation on the ground state following internal conversion, with no exit barrier for H loss but a tight transition state for H{sub 2} loss. The translational energy distribution for H atom loss is similar to that in previous work on propargyl in which the H atom, rather than the heavy fragment, was detected. The branching ratio for H loss/H{sub 2} loss was determined to be 97.6/2.4 {+-} 1.2, in good agreement with RRKM results.

  15. Short range radio locator system

    DOE Patents [OSTI]

    McEwan, Thomas E. (Livermore, CA)

    1996-01-01T23:59:59.000Z

    A radio location system comprises a wireless transmitter that outputs two megahertz period bursts of two gigahertz radar carrier signals. A receiver system determines the position of the transmitter by the relative arrival of the radar bursts at several component receivers set up to have a favorable geometry and each one having a known location. One receiver provides a synchronizing gating pulse to itself and all the other receivers to sample the ether for the radar pulse. The rate of the synchronizing gating pulse is slightly offset from the rate of the radar bursts themselves, so that each sample collects one finely-detailed piece of information about the time-of-flight of the radar pulse to each receiver each pulse period. Thousands of sequential pulse periods provide corresponding thousand of pieces of information about the time-of-flight of the radar pulse to each receiver, in expanded, not real time. Therefore the signal processing can be done with relatively low-frequency, inexpensive components. A conventional microcomputer is then used to find the position of the transmitter by geometric triangulation based on the relative time-of-flight information.

  16. NON-INVASIVE DETERMINATION OF THE LOCATION AND DISTRIBUTION OF FREE-PHASE DENSE NONAQUEOUS PHASE LIQUIDS (DNAPL) BY SEISMIC REFLECTION TECHNIQUES

    SciTech Connect (OSTI)

    Michael G. Waddell; William J. Domoracki; Tom J. Temples

    2001-05-01T23:59:59.000Z

    This semi-annual technical progress report is for part of Task 4 (site evaluation), on DOE contact number DE-AR26-98FT40369. The project had planned one additional deployment to another site other than Savannah River Site (SRS) or DOE Hanford. After the SUBCON midyear review in Albuquerque, NM, it was decided that two additional deployments would be performed. The first deployment is to test the feasibility of using non-invasive seismic reflection and AVO analysis as monitoring to assist in determining the effectiveness of Dynamic Underground Stripping (DUS) in removal of DNAPL. The Second deployment site is the Department of Defense (DOD) Charleston Navy Weapons Station, Solid Waste Management Unit 12 (SWMU-12) Charleston, SC was selected in consultation with National Energy Technology Laboratory (NETL) and DOD Navy Facilities Engineering Command Southern Division (NAVFAC) personnel. Base upon the review of existing data and due to the shallow target depth the project team has collected three Vertical Seismic Profiles (VSP) and experimental reflection line. At the time of preparing this report VSP data and experimental reflection line data has been collected and has have preliminary processing on the data sets.

  17. Pollution Prevention Opportunity Assessment for the SNL/NM cafeterias.

    SciTech Connect (OSTI)

    McCord, Samuel Adam

    2005-12-01T23:59:59.000Z

    This Pollution Prevention Opportunity Assessment (PPOA) was conducted for the two Sandia National Laboratories/New Mexico cafeteria facilities between May and August 2005. The primary purpose of this PPOA is to assess waste and resource reduction opportunities and issue Pollution Prevention (P2) recommendations for Sandia's food service facilities. This PPOA contains recommendations for energy, water and resource reduction, as well as material substitution based upon environmentally preferable purchasing. Division 3000 has requested the PPOA report as part of the Division's compliance effort to implement the Environmental Management System (EMS) per DOE Order 450.1. This report contains a summary of the information collected and analyses performed with recommended options for implementation. The SNL/NM P2 Group will work with Division 3000 and the respective cafeteria facilities to implement these options.

  18. High power terahertz generation using 1550?nm plasmonic photomixers

    SciTech Connect (OSTI)

    Berry, Christopher W. [Electrical Engineering and Computer Science Department, University of Michigan, Ann Arbor, Michigan 48109 (United States); Hashemi, Mohammad R.; Jarrahi, Mona [Electrical Engineering and Computer Science Department, University of Michigan, Ann Arbor, Michigan 48109 (United States); Electrical Engineering Department, University of California Los Angeles, Los Angeles, California 90095 (United States); Preu, Sascha [Department of Electrical Engineering and Information Technology, Technical University Darmstadt, D-64283 Darmstadt (Germany); Lu, Hong; Gossard, Arthur C. [Materials Department, University of California, Santa Barbara, California 93106 (United States)

    2014-07-07T23:59:59.000Z

    We present a 1550?nm plasmonic photomixer operating under pumping duty cycles below 10%, which offers significantly higher terahertz radiation power levels compared to previously demonstrated photomixers. The record-high terahertz radiation powers are enabled by enhancing the device quantum efficiency through use of plasmonic contact electrodes, and by mitigating thermal breakdown at high optical pump power levels through use of a low duty cycle optical pump. The repetition rate of the optical pump can be specifically selected at a given pump duty cycle to control the spectral linewidth of the generated terahertz radiation. At an average optical pump power of 150 mW with a pump modulation frequency of 1 MHz and pump duty cycle of 2%, we demonstrate up to 0.8 mW radiation power at 1 THz, within each continuous wave radiation cycle.

  19. Note: Deep ultraviolet Raman spectrograph with the laser excitation line down to 177.3 nm and its application

    SciTech Connect (OSTI)

    Jin, Shaoqing [State Key Laboratory of Catalysis, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China) [State Key Laboratory of Catalysis, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); University of the Chinese Academy of Sciences, Beijing 100049 (China); Fan, Fengtao; Guo, Meiling; Zhang, Ying; Feng, Zhaochi, E-mail: zcfeng@dicp.ac.cn, E-mail: canli@dicp.ac.cn; Li, Can, E-mail: zcfeng@dicp.ac.cn, E-mail: canli@dicp.ac.cn [State Key Laboratory of Catalysis, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China)] [State Key Laboratory of Catalysis, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China)

    2014-04-15T23:59:59.000Z

    Deep UV Raman spectrograph with the laser excitation line down to 177.3 nm was developed in this laboratory. An ellipsoidal mirror and a dispersed-subtractive triple monochromator were used to collect and disperse Raman light, respectively. The triple monochromator was arranged in a triangular configuration with only six mirrors used. 177.3 nm laser excited Raman spectrum with cut-off wavenumber down to 200 cm{sup ?1} and spectral resolution of 8.0 cm{sup ?1} can be obtained under the condition of high purity N{sub 2} purging. With the CC ? bond in Teflon selectively excited by the 177.3 nm laser, resonance Raman spectrum of Teflon with good quality was recorded on the home-built instrument and the ?-?{sup *} transition of CC bond was studied. The result demonstrates that deep UV Raman spectrograph is powerful for studying the systems with electronic transition located in the deep UV region.

  20. Draft Complex Transformation Supplemental Programmatic Environmental...

    Office of Environmental Management (EM)

    Jemez Road, Los Alamos, NM 87545, Phone: (505) 667-5809. NNSA Service Center, Zimmerman Library, Government Documents, University of New Mexico, Albuquerque, NM 87131, Phone:...

  1. New Zone Plate for Soft X-Ray Microscopy at 15-nm Spatial Resolution

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    made with the XM-1's current 25-nm MZP, the new MZP was able to obtain sharp images of lines a mere 15 nm apart-where the older zone plate had seen only a featureless field of...

  2. Location deterministic biosensing from quantum-dot-nanowire assemblies

    SciTech Connect (OSTI)

    Liu, Chao [Materials Science and Engineering Program, Texas Materials Institute, University of Texas at Austin, Austin, Texas 78712 (United States); Kim, Kwanoh [Department of Mechanical Engineering, University of Texas at Austin, Austin, Texas 78712 (United States); Fan, D. L., E-mail: dfan@austin.utexas.edu [Materials Science and Engineering Program, Texas Materials Institute, University of Texas at Austin, Austin, Texas 78712 (United States); Department of Mechanical Engineering, University of Texas at Austin, Austin, Texas 78712 (United States)

    2014-08-25T23:59:59.000Z

    Semiconductor quantum dots (QDs) with high fluorescent brightness, stability, and tunable sizes, have received considerable interest for imaging, sensing, and delivery of biomolecules. In this research, we demonstrate location deterministic biochemical detection from arrays of QD-nanowire hybrid assemblies. QDs with diameters less than 10?nm are manipulated and precisely positioned on the tips of the assembled Gold (Au) nanowires. The manipulation mechanisms are quantitatively understood as the synergetic effects of dielectrophoretic (DEP) and alternating current electroosmosis (ACEO) due to AC electric fields. The QD-nanowire hybrid sensors operate uniquely by concentrating bioanalytes to QDs on the tips of nanowires before detection, offering much enhanced efficiency and sensitivity, in addition to the position-predictable rationality. This research could result in advances in QD-based biomedical detection and inspires an innovative approach for fabricating various QD-based nanodevices.

  3. Analysis of the AirTouch automatic vehicle location system's ability to locate moving vehicles

    E-Print Network [OSTI]

    Henry, Tracy Lynn

    1995-01-01T23:59:59.000Z

    Automatic vehicle location systems are becoming more prevalent in diverse transportation applications. Their ability to locate vehicles can assist in locating emergency and public transit vehicles for better real-time dispatching as well...

  4. Analysis of the AirTouch automatic vehicle location system's ability to locate moving vehicles

    E-Print Network [OSTI]

    Henry, Tracy Lynn

    1995-01-01T23:59:59.000Z

    Automatic vehicle location systems are becoming more prevalent in diverse transportation applications. Their ability to locate vehicles can assist in locating emergency and public transit vehicles for better real-time dispatching as well...

  5. header for SPIE use Fluoropolymers for 157nm Lithography: Optical Properties from VUV

    E-Print Network [OSTI]

    Rollins, Andrew M.

    new radiation damage mechanisms in previously accepted optical materials. For 157 nm pellicles, newheader for SPIE use Fluoropolymers for 157nm Lithography: Optical Properties from VUV Absorbance With the introduction of 157 nm as the next optical lithography wavelength, the need for new pellicle and photoresist

  6. CX-004542: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Ground Mount Photovoltaic Installations at City of Albuquerque Fire AcademyCX(s) Applied: B5.1Date: 11/24/2010Location(s): Albuquerque, New MexicoOffice(s): Energy Efficiency and Renewable Energy, Golden Field Office

  7. Damage thresholds of fluoride multilayers at 355 nm

    SciTech Connect (OSTI)

    Chow, R.; Kozlowski, M.R.; Loomis, G.E.; Rainer, F.

    1992-10-01T23:59:59.000Z

    Fluoride multilayer coatings were evaluated for use in 355 nm high reflector applications. The LaF[sub 3]/Na[sub 3]AlF[sub 6], NdF[sub 3]/Na[sub 3]AlF[sub 6] and GdF[sub 3]/Na[sub 3]AlF[sub 6] multilayers had laser damage thresholds of 20, 17.9 and 7.4 (measured at 10-ns pulsewidths), respectively. High tensile stresses in the coatings restricted this evaluation to only 5-layer-pair partial reflectors (49--52%).The LaF[sub 3]/Na[sub 3]AlF[sub 6], NdF[sub 3]/Na[sub 3]Al[sub 6] and GdF[sub 3]/Na[sub 3]AlF[sub 6] multilayers had tensile stresses of [approximately] 1.1 [times] 109, 1.3 [times] 109 and 9.3 [times] 10[sup 8] dynes/cm[sup 2], respectively. Substrate material and glow-discharge processing of the substrates were found to influence the density of stress-induced coating fractures and damage thresholds in some cases. If stress fracturing and scatter can be controlled, these fluoride material combinations are suited for 3[omega] applications.

  8. Twistorial constructions of special Riemannian Rui Albuquerque

    E-Print Network [OSTI]

    Albuquerque, Rui

    is called hyperkähler if its holon- omy is in Sp(n). In this case we may construct a global quaternionic

  9. Sandia National Laboratories: Albuquerque Mayor Richard Berry

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    U.S. water supply and demand and explored potential "transformational" solutions from the perspectives of technology and policy (or both) and discussed ... Last Updated: October...

  10. Albuquerque Roundtable Summary | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently20,000 RussianBy:Whether you're a16-17, 201529,VulnerabilitiesAlamoThis projectsession

  11. Albuquerque Complex | National Nuclear Security Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMForms About Become

  12. Albuquerque Technology Incubator | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTriWildcat 1AMEEAisin Seikiand TelephoneAlbemarle County,Albro

  13. Ion Exclusion by Sub 2-nm Carbon Nanotube Pores

    SciTech Connect (OSTI)

    Fornasiero, F; Park, H G; Holt, J K; Stadermann, M; Grigoropoulos, C P; Noy, A; Bakajin, O

    2008-04-09T23:59:59.000Z

    Carbon nanotubes offer an outstanding platform for studying molecular transport at nanoscale, and have become promising materials for nanofluidics and membrane technology due to their unique combination of physical, chemical, mechanical, and electronic properties. In particular, both simulations and experiments have proved that fluid flow through carbon nanotubes of nanometer size diameter is exceptionally fast compared to what continuum hydrodynamic theories would predict when applied on this length scale, and also, compared to conventional membranes with pores of similar size, such as zeolites. For a variety of applications such as separation technology, molecular sensing, drug delivery, and biomimetics, selectivity is required together with fast flow. In particular, for water desalination, coupling the enhancement of the water flux with selective ion transport could drastically reduce the cost of brackish and seawater desalting. In this work, we study the ion selectivity of membranes made of aligned double-walled carbon nanotubes with sub-2 nm diameter. Negatively charged groups are introduced at the opening of the carbon nanotubes by oxygen plasma treatment. Reverse osmosis experiments coupled with capillary electrophoresis analysis of permeate and feed show significant anion and cation rejection. Ion exclusion declines by increasing ionic strength (concentration) of the feed and by lowering solution pH; also, the highest rejection is observed for the A{sub m}{sup Z{sub A}} C{sub n}{sup Z{sub C}} salts (A=anion, C=cation, z= valence) with the greatest Z{sub A}/Z{sub C} ratio. Our results strongly support a Donnan-type rejection mechanism, dominated by electrostatic interactions between fixed membrane charges and mobile ions, while steric and hydrodynamic effects appear to be less important. Comparison with commercial nanofiltration membranes for water softening reveals that our carbon nanotube membranes provides far superior water fluxes for similar ion rejection capabilities.

  14. Helicopter magnetic survey conducted to locate wells

    SciTech Connect (OSTI)

    Veloski, G.A.; Hammack, R.W.; Stamp, V. (Rocky Mountain Oilfield Testing Center); Hall, R. (Rocky Mountain Oilfield Testing Center); Colina, K. (Rocky Mountain Oilfield Testing Center)

    2008-07-01T23:59:59.000Z

    A helicopter magnetic survey was conducted in August 2007 over 15.6 sq mi at the Naval Petroleum Reserve No. 3s (NPR-3) Teapot Dome Field near Casper, Wyoming. The surveys purpose was to accurately locate wells drilled there during more than 90 years of continuous oilfield operation. The survey was conducted at low altitude and with closely spaced flight lines to improve the detection of wells with weak magnetic response and to increase the resolution of closely spaced wells. The survey was in preparation for a planned CO2 flood for EOR, which requires a complete well inventory with accurate locations for all existing wells. The magnetic survey was intended to locate wells missing from the well database and to provide accurate locations for all wells. The ability of the helicopter magnetic survey to accurately locate wells was accomplished by comparing airborne well picks with well locations from an intense ground search of a small test area.

  15. Low-noise low-jitter 32-pixels CMOS single-photon avalanche diodes array for single-photon counting from 300 nm to 900 nm

    SciTech Connect (OSTI)

    Scarcella, Carmelo; Tosi, Alberto, E-mail: alberto.tosi@polimi.it; Villa, Federica; Tisa, Simone; Zappa, Franco [Politecnico di Milano, Dipartimento di Elettronica, Informazione e Bioingegneria, Piazza Leonardo da Vinci 32, I-20133 Milano (Italy)] [Politecnico di Milano, Dipartimento di Elettronica, Informazione e Bioingegneria, Piazza Leonardo da Vinci 32, I-20133 Milano (Italy)

    2013-12-15T23:59:59.000Z

    We developed a single-photon counting multichannel detection system, based on a monolithic linear array of 32 CMOS SPADs (Complementary Metal-Oxide-Semiconductor Single-Photon Avalanche Diodes). All channels achieve a timing resolution of 100 ps (full-width at half maximum) and a photon detection efficiency of 50% at 400 nm. Dark count rate is very low even at room temperature, being about 125 counts/s for 50 ?m active area diameter SPADs. Detection performance and microelectronic compactness of this CMOS SPAD array make it the best candidate for ultra-compact time-resolved spectrometers with single-photon sensitivity from 300 nm to 900 nm.

  16. Location theory and the location of industry along an interstate highway

    E-Print Network [OSTI]

    Miller, James Patterson

    1965-01-01T23:59:59.000Z

    to determine the significance of these locational factors among plants with different characteristics that have located in certain localities should provide pertinent information with both practical and theoretical implications. Since 1956, approximately 64... Summary of Plant Location Theory Cost Fac'tots . . . . . . . . . . . . . ~ The Importance of 'the Demand Factor Greenhut's General Theory of Plant Location and the Intangible Factor Location Factors as Revealed by Empirical Study Greenhut's Case...

  17. Environmental assessment of the Environmental Restoration Project at Sandia National Laboratories/New Mexico

    SciTech Connect (OSTI)

    NONE

    1996-03-01T23:59:59.000Z

    Sandia National Laboratories/New Mexico (SNL/NM) is managed and operated for the U.S. Department of Energy (DOE) by Sandia Corporation, a subsidiary of the Lockheed Martin Company. SNL/NM is located on land controlled by DOE within the boundaries of Kirtland Air Force Base (KAFB) in Albuquerque, New Mexico. The major responsibilities of SNL/NM are the support of national security and energy projects. This report provides an environmental assessment of proposed remedial action activities at the solid waste management units at SNL/NM. A risk assessment of health hazards is also discussed.

  18. Regenerator Location Problem in Flexible Optical Networks

    E-Print Network [OSTI]

    BARIS YILDIZ

    2014-11-22T23:59:59.000Z

    Nov 22, 2014 ... Abstract: In this study we introduce the regenerator location problem in flexible optical networks (RLP-FON). With a given traffic demand,...

  19. Automated Fault Location In Smart Distribution Systems

    E-Print Network [OSTI]

    Lotfifard, Saeed

    2012-10-19T23:59:59.000Z

    ............................................................................................................................ 88 x LIST OF FIGURES Page Figure 1 Multiple possible fault location estimation for a fault at node A ........................ 7 Figure 2 Simple faulted network model [1] [2011] IEEE ............................................ 40 Figure 3... Types C and D voltage sags for different phases [51] [2003] IEEE .............. 42 Figure 4 Rf estimation procedure [1] [2011] IEEE ...................................................... 45 Figure 5 Flow chart of the fault location algorithm [1...

  20. RECYCLING PROGRAM TYPE LOCATION ALLOWED NOT ALLOWED

    E-Print Network [OSTI]

    Miami, University of

    RECYCLING PROGRAM TYPE LOCATION ALLOWED NOT ALLOWED Batteries, toner, ink cartridges & cell phones and recycling is an important part of that effort. Below is a guide to on-campus recycling at RSMAS: Visit http://www.rsmas.miami.edu/msgso/ for map of recycling bin locations. NOTE: This is not an exhaustive list. If unauthorized items are found

  1. Optimized Fault Location Final Project Report

    E-Print Network [OSTI]

    Engineering Research Center Optimized Fault Location Concurrent Technologies Corporation Final Project Report by the Concurrent Technologies Corporation (CTC) and the Power Systems Engineering Research Center (PSERC). NeitherOptimized Fault Location Final Project Report Power Systems Engineering Research Center A National

  2. Locating and tracking assets using RFID

    E-Print Network [OSTI]

    Kim, Gak Gyu

    2009-05-15T23:59:59.000Z

    , this research presents a mathematical model of using RFID (both handheld readers and stationary readers) for e?cient asset location. We derive the expected cost of locating RFIDtagged objects in a multiarea environment where handheld RF readers are used. We...

  3. Location Privacy and the Personal Distributed Environment

    E-Print Network [OSTI]

    Atkinson, Robert C

    Location Privacy and the Personal Distributed Environment Robert C Atkinson, Swee Keow Goo, James-- The Personal Distributed Environment is a new concept being developed within the Mobile VCE Core 3 research, wherever their location: ubiquitous access. Devices are co-ordinated by Device Management Entities (DMEs

  4. Demonstration of 12 nm resolution Fresnel zone plate lens based soft x-ray microscopy

    E-Print Network [OSTI]

    Chao, W.

    2010-01-01T23:59:59.000Z

    of 12 nm Resolution Fresnel Zone Plate Lens based Soft X-raynanofabrication process for Fresnel zone plate lenses. Theoptical performance of Fresnel zone plate lens based imaging

  5. Use of a dynamic simulation model to understand nitrogen cycling in the middle Rio Grande, NM.

    SciTech Connect (OSTI)

    Meixner, Tom (University of Arizona, Tucson, AZ); Tidwell, Vincent Carroll; Oelsner, Gretchen (University of Arizona, Tucson, AZ); Brooks, Paul (University of Arizona, Tucson, AZ); Roach, Jesse D.

    2008-08-01T23:59:59.000Z

    Water quality often limits the potential uses of scarce water resources in semiarid and arid regions. To best manage water quality one must understand the sources and sinks of both solutes and water to the river system. Nutrient concentration patterns can identify source and sink locations, but cannot always determine biotic processes that affect nutrient concentrations. Modeling tools can provide insight into these large-scale processes. To address questions about large-scale nitrogen removal in the Middle Rio Grande, NM, we created a system dynamics nitrate model using an existing integrated surface water--groundwater model of the region to evaluate our conceptual models of uptake and denitrification as potential nitrate removal mechanisms. We modeled denitrification in groundwater as a first-order process dependent only on concentration and used a 5% denitrification rate. Uptake was assumed to be proportional to transpiration and was modeled as a percentage of the evapotranspiration calculated within the model multiplied by the nitrate concentration in the water being transpired. We modeled riparian uptake as 90% and agricultural uptake as 50% of the respective evapotranspiration rates. Using these removal rates, our model results suggest that riparian uptake, agricultural uptake and denitrification in groundwater are all needed to produce the observed nitrate concentrations in the groundwater, conveyance channels, and river as well as the seasonal concentration patterns. The model results indicate that a total of 497 metric tons of nitrate-N are removed from the Middle Rio Grande annually. Where river nitrate concentrations are low and there are no large nitrate sources, nitrate behaves nearly conservatively and riparian and agricultural uptake are the most important removal mechanisms. Downstream of a large wastewater nitrate source, denitrification and agricultural uptake were responsible for approximately 90% of the nitrogen removal.

  6. The Construction of Locative Situations: Locative Media and the Situationist International, Recuperation or Redux?

    E-Print Network [OSTI]

    McGarrigle, Conor

    2009-01-01T23:59:59.000Z

    closely aligned to the SI's construction of situations. ThisG (1957) Report on the Construction of Situations and on theThe Construction of Locative Situations: Locative Media and

  7. SFSU Building Coordinators List College or Administrative Unit Location(s)

    E-Print Network [OSTI]

    SFSU Building Coordinators List College or Administrative Unit Location(s) Building Coordinator81193 cathym@sfsu.edu GYM 102B Student Services Building SSB Mirel Tikkanen x53566 mtikkane@sfsu.edu SSB

  8. Method of locating underground mines fires

    DOE Patents [OSTI]

    Laage, Linneas (Eagam, MN); Pomroy, William (St. Paul, MN)

    1992-01-01T23:59:59.000Z

    An improved method of locating an underground mine fire by comparing the pattern of measured combustion product arrival times at detector locations with a real time computer-generated array of simulated patterns. A number of electronic fire detection devices are linked thru telemetry to a control station on the surface. The mine's ventilation is modeled on a digital computer using network analysis software. The time reguired to locate a fire consists of the time required to model the mines' ventilation, generate the arrival time array, scan the array, and to match measured arrival time patterns to the simulated patterns.

  9. Construction of a 1014.8nm fiber amplifier for quadrupling into the UV

    E-Print Network [OSTI]

    Giuoco, Frank Joseph

    2004-09-30T23:59:59.000Z

    A fiber amplifier is constructed at 1014.8nm and then frequency doubled to produce 507.4nm. This could then be frequency doubled again to produce 253.7 radiation. The fiber amplifier consists of Ytterbium doped double-clad fiber cooled to low...

  10. Construction of a 1014.8nm fiber amplifier for quadrupling into the UV

    E-Print Network [OSTI]

    Giuoco, Frank Joseph

    2004-09-30T23:59:59.000Z

    A fiber amplifier is constructed at 1014.8nm and then frequency doubled to produce 507.4nm. This could then be frequency doubled again to produce 253.7 radiation. The fiber amplifier consists of Ytterbium doped double-clad fiber cooled to low...

  11. Enhanced production of coherent pulsed radiation at 125 nm: the route towards a tabletop VUV laser.

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    surface with a 50-mm quartz lens. The VUV signal is measured by a calibrated CsI solar efficiency. Since deposition of opaque Hg on windows is an issue, very complex cell geometries have been to produce coherent 125-nm light with a single dye laser at 625.7 nm using a room-temperature Hg cell [3]. We

  12. A 60GHz, 13dBm Fully Integrated 65nm RF-CMOS Power Amplifier

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    simulation. A. Transistor Layout Caracterisation The size of the transistor depends on the maximum powerA 60GHz, 13dBm Fully Integrated 65nm RF-CMOS Power Amplifier Sofiane Aloui, Eric Kerherv IMS-CNRS University of Toulouse Toulouse, France plana@laas.fr Abstract--A 65nm CMOS, 60GHz fully integrated power

  13. Coherence and Linewidth Studies of a 4-nm High Power FEL

    E-Print Network [OSTI]

    Fawley, W.M.

    2008-01-01T23:59:59.000Z

    bandwidth for a single-pass FEL amplifier initiated by SASE.Studies of a 4-nm High Power FEL W.M. Fawley, A.M. Sessler,Studies of a 4-nm High Power FEL W. M. Fawley and A. M.

  14. Passively modelocked 832 nm vertical-external-cavity surface-emitting

    E-Print Network [OSTI]

    Keller, Ursula

    , focused into an optical spot with dimensions of 100 ? 200 mm. The SESAM consisted of an AlAs/Al0.2Ga0.8As DBR, a spacer layer of GaAs0.75P0.25, a 4.8 nm GaAs quantum well and a 2 nm-thick capping layer of Ga

  15. Magnetization switching in 70-nm-wide pseudo-spin-valve nanoelements Xiaobin Zhua)

    E-Print Network [OSTI]

    Grütter, Peter

    Fe, respectively, in this case separated by a spacer layer. The individual elements have dimensions of 70 nm 550 nm with submicron or deep- submicron dimensions.4,5 These PSV or MTJ elements con- sist of asymmetric sandwiches is magnetically hard. For elements with micron-scale dimensions, interactions between the layers can lead

  16. THE PLANAR HUB LOCATION PROBLEM: A PROBABILISTIC ...

    E-Print Network [OSTI]

    2012-11-21T23:59:59.000Z

    Nov 5, 2012 ... Aykin and Brown, [4]. ...... [8] J.F. Campbell, Integer programming formulations of discrete hub location problems, European J. of O.R.. 72(1994)...

  17. Developing a theory of nightclub location choice

    E-Print Network [OSTI]

    Crim, Stephen J. (Stephen Johnson)

    2008-01-01T23:59:59.000Z

    This work is an investigation of the factors that influence where nightclubs locate within a city. Nightclubs, like other social spaces, provide important social and economic benefits in the urban environment. As amenities, ...

  18. Techniques for Mobile Location Estimation in UMTS

    E-Print Network [OSTI]

    Thomas, Nicholas J

    The subject area of this thesis is the locating of mobile users using the future 3rd generation spread spectrum communication system UMTS. The motivation behind this work is twofold: firstly the United States Federal ...

  19. Supplementary materials: Site location and visiting time

    E-Print Network [OSTI]

    Meskhidze, Nicholas

    sites during the mobile deployment of CRUISER on June 25, 2007. FL=Fletcher, MB=Mitchell's Bay, BCr=Bear;60 50 40 30 20 10 0 PPS(nm) Transient 80 km/hr 110 km/hr SAAB Chevy Chrysler 300 Smoker Diesel truck Gasoline cars (transient) Grand diesel average: 51.9 (s.d.=6.5; N=418) Grand gasoline average: 30.0 (s

  20. Driver expectancy in locating automotive controls

    E-Print Network [OSTI]

    Francis, Dawn Suzette

    1990-01-01T23:59:59.000Z

    DRIVER EXPECTANCY IN LOCATING AUTOMOTIVE CONTROLS A Thesis by DAWN SUZETTE FRANCIS Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE May 1990... Major Subject: Industrial Engineering DRIVER EXPECTANCY IN LOCATING AUTOMOTIVE CONTROLS A Thesis by DAWN SUZETTE FRANCIS Approved as to style and content by: R. Dale Huchi son (Chair of Committee) Rodger . . ppa (Member) Waymon L ohnston (M er...

  1. Driver expectancy in locating automotive controls

    E-Print Network [OSTI]

    Francis, Dawn Suzette

    1990-01-01T23:59:59.000Z

    Major Subject: Industrial Engineering DRIVER EXPECTANCY IN LOCATING AUTOMOTIVE CONTROLS A Thesis by DAWN SUZETTE FRANCIS Approved as to style and content by: R. Dale Huchi son (Chair of Committee) Rodger . . ppa (Member) Waymon L ohnston (M er... assessment of automotive industry practices in 1971 and concluded that only 50% of controls/displays on various models could be said to have a common location. Perel (1974) reviewed prior research and found that it would be difficult to pinpoint...

  2. Locating Boosted Kerr and Schwarzschild Apparent Horizons

    E-Print Network [OSTI]

    Mijan F. Huq; Matthew W. Choptuik; Richard A. Matzner

    2000-02-22T23:59:59.000Z

    We describe a finite-difference method for locating apparent horizons and illustrate its capabilities on boosted Kerr and Schwarzschild black holes. Our model spacetime is given by the Kerr-Schild metric. We apply a Lorentz boost to this spacetime metric and then carry out a 3+1 decomposition. The result is a slicing of Kerr/Schwarzschild in which the black hole is propagated and Lorentz contracted. We show that our method can locate distorted apparent horizons efficiently and accurately.

  3. Superconducting nanowire single-photon detectors at a wavelength of 940 nm

    E-Print Network [OSTI]

    Zhang, W J; You, L X; He, Y H; Zhang, L; Liu, X Y; Yang, X Y; Wu, J J; Guo, Q; Chen, S J; Wang, Z; Xie, X M

    2015-01-01T23:59:59.000Z

    We develop single-photon detectors comprising single-mode fiber-coupled superconducting nanowires, with high system detection efficiencies at a wavelength of 940 nm. The detector comprises a 6.5-nm-thick, 110-nm-wide NbN nanowire meander fabricated onto a Si substrate with a distributed Bragg reflector for enhancing the optical absorptance. We demonstrate that, via the design of a low filling factor (1/3) and active area ({\\Phi} = 10 {\\mu}m), the system reaches a detection efficiency of ~60% with a dark count rate of 10 Hz, a recovery time <12 ns, and a timing jitter of ~50 ps.

  4. Rare-earth plasma extreme ultraviolet sources at 6.5-6.7 nm

    SciTech Connect (OSTI)

    Otsuka, Takamitsu; Higashiguchi, Takeshi; Yugami, Noboru; Yatagai, Toyohiko [Department of Advanced Interdisciplinary Sciences, Center for Optical Research and Education (CORE), Utsunomiya University, Yoto 7-1-2, Utsunomiya, Tochigi 321-8585 (Japan); Kilbane, Deirdre; White, John; Dunne, Padraig; O'Sullivan, Gerry [School of Physics, University College Dublin, Belfield, Dublin 4 (Ireland); Jiang, Weihua [Department of Electrical Engineering, Nagaoka University of Technology, Kami-tomiokamachi 1603-1, Nagaoka, Niigata 940-2188 (Japan); Endo, Akira [Forschungszentrum Dresden, Bautzner Landstrs. 400, D-01328 Dresden (Germany)

    2010-09-13T23:59:59.000Z

    We have demonstrated a laser-produced plasma extreme ultraviolet source operating in the 6.5-6.7 nm region based on rare-earth targets of Gd and Tb coupled with a Mo/B{sub 4}C multilayer mirror. Multiply charged ions produce strong resonance emission lines, which combine to yield an intense unresolved transition array. The spectra of these resonant lines around 6.7 nm (in-band: 6.7 nm {+-}1%) suggest that the in-band emission increases with increased plasma volume by suppressing the plasma hydrodynamic expansion loss at an electron temperature of about 50 eV, resulting in maximized emission.

  5. National Environmental Policy Act (NEPA) compliance at Sandia National Laboratories/New Mexico (SNL/NM)

    SciTech Connect (OSTI)

    Wolff, T.A. [Sandia National Labs., Albuquerque, NM (United States). Community Involvement and Issues Management Dept.; Hansen, R.P. [Hansen Environmental Consultants, Englewood, CO (United States)

    1998-08-01T23:59:59.000Z

    This report on National Environmental Policy Act (NEPA) compliance at Sandia National Laboratories/New Mexico (SNL/NM) chronicles past and current compliance activities and includes a recommended strategy that can be implemented for continued improvement. This report provides a list of important references. Attachment 1 contains the table of contents for SAND95-1648, National Environmental Policy Act (NEPA) Compliance Guide Sandia National Laboratories (Hansen, 1995). Attachment 2 contains a list of published environmental assessments (EAs) and environmental impact statements (EISs) prepared by SNL/NM. Attachment 3 contains abstracts of NEPA compliance papers authored by SNL/NM and its contractors.

  6. Lasing from single, stationary, dye-doped glycerol/water microdroplets located on a superhydrophobic surface

    E-Print Network [OSTI]

    Kiraz, A; Do?anay, S; Dndar, M A; Kurt, A; Kalaycıo?lu, H; Demirel, A L

    2007-01-01T23:59:59.000Z

    We report laser emission from single, stationary, Rhodamine B-doped glycerol/water microdroplets located on a superhydrophobic surface. In the experiments, a pulsed, frequency-doubled Nd:YAG laser operating at 532 nm was used as the excitation source. The microdroplets ranged in diameter from a few to 20 um. Lasing was achieved in the red-shifted portion of the dye emission spectrum with threshold fluences as low as 750 J/cm2. Photobleaching was observed when the microdroplets were pumped above threshold. In certain cases, multimode lasing was also observed and attributed to the simultaneous lasing of two modes belonging to different sets of whispering gallery modes.

  7. Reconstructing Spatial Distributions from Anonymized Locations

    SciTech Connect (OSTI)

    Horey, James L [ORNL] [ORNL; Forrest, Stephanie [University of New Mexico, Albuquerque] [University of New Mexico, Albuquerque; Groat, Michael [University of New Mexico, Albuquerque] [University of New Mexico, Albuquerque

    2012-01-01T23:59:59.000Z

    Devices such as mobile phones, tablets, and sensors are often equipped with GPS that accurately report a person's location. Combined with wireless communication, these devices enable a wide range of new social tools and applications. These same qualities, however, leave location-aware applications vulnerable to privacy violations. This paper introduces the Negative Quad Tree, a privacy protection method for location aware applications. The method is broadly applicable to applications that use spatial density information, such as social applications that measure the popularity of social venues. The method employs a simple anonymization algorithm running on mobile devices, and a more complex reconstruction algorithm on a central server. This strategy is well suited to low-powered mobile devices. The paper analyzes the accuracy of the reconstruction method in a variety of simulated and real-world settings and demonstrates that the method is accurate enough to be used in many real-world scenarios.

  8. Location theory and the location of industry along an interstate highway

    E-Print Network [OSTI]

    Miller, James Patterson

    1965-01-01T23:59:59.000Z

    a greater gamble. This sect. ion has been devoted to s review of the fundamental factors underlying all plant location ss recognised in location theory. The next section will review some recent. empirical attempts to determine the actual... for this thesis was possible through the assistance provided )ointly by the Texas Highway Department and the Bureau of Public Roads. i. v TABLE OF CONTENTS Chapter Page INTRODUCTION Purpose Plan of Study REVIEW OF PLANT LOCATION CONCEPTS Introduction...

  9. Utility Locating in the DOE Environment

    SciTech Connect (OSTI)

    Clark Scott; Gail Heath

    2006-04-01T23:59:59.000Z

    Some advances have been made in utility locating in recent years and standards have been recently published to try and categorize the level of information known about the utility in the subsurface. At the same time some characterization about the level of effort or technology in the geophysicist approach to utility locating may be generalized. The DOE environment poses some added difficulties and this presentation covers these issues, costs and the technical approach that has been developed at the INEEL to prevent utility hits and how it fits into the generalized classification of effort.

  10. Optical system for Argus 355-nm 90-mm aperture target-illumination experiments

    SciTech Connect (OSTI)

    Johnson, B.C.; Boyd, R.; Hermes, G.; Hildum, J.S.; Linford, G.; Martin, W.E.

    1982-02-01T23:59:59.000Z

    The requirements of laser alignment, crystal tuning, target alignment, and laser beam diagnosis are provided by this optical system. Initial setup and preshot alignment techniques are discussed. Layout and operation are contrasted with the 532 nm target experiments.

  11. LOS ALAMOS, N.M., June 18, 2014-Los Alamos National Laboratory...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    June 18, 2014 Los Alamos to partner with Toshiba to remotely and safely peer inside nuclear reactors LOS ALAMOS, N.M., June 18, 2014-Los Alamos National Laboratory today...

  12. Switching of 800 nm femtosecond laser pulses using a compact PMN-PT modulator

    E-Print Network [OSTI]

    Adany, Peter; Price, E. Shane; Johnson, Carey K.; Zhang, Run; Hui, Rongqing

    2009-03-13T23:59:59.000Z

    A voltage-controlled birefringent cell based on ceramic PMN-PT material is used to enable fast intensity modulation of femtosecond laser pulses in the 800 nm wavelength window. The birefringent cell based on a PMN-PT ...

  13. Sub-10-nm electron-beam lithography for templated placement of colloidal quantum dots

    E-Print Network [OSTI]

    Manfrinato, Vitor Riseti

    2011-01-01T23:59:59.000Z

    This thesis presents the investigation of resolution limits of electron-beam lithography (EBL) at the sub-10-nm scale. EBL patterning was investigated at low electron energy (2 keV) in a converted scanning electron microscope ...

  14. Sub-20nm substrate patterning using a self-assembled nanocrystal template

    E-Print Network [OSTI]

    Tabone, Ryan C

    2005-01-01T23:59:59.000Z

    A hexagonally close-packed monolayer of lead selenide quantum dots is presented as a template for patterning with a tunable resolution from 2 to 20nm. Spin-casting and micro-contact printing are resolved as methods of ...

  15. Comprehensive inverse modeling for the study of carrier transport models in sub-50nm MOSFETs

    E-Print Network [OSTI]

    Djomehri, Ihsan Jahed, 1976-

    2002-01-01T23:59:59.000Z

    Direct quantitative 2-D characterization of sub-50 nm MOSFETs continues to be elusive. This research develops a comprehensive indirect inverse modeling technique for extracting 2-D device topology using combined log(I)-V ...

  16. Carbon nanotube assisted formation of sub-50 nm polymeric nano-structures

    E-Print Network [OSTI]

    Lee, Chia-Hua

    2008-01-01T23:59:59.000Z

    A novel processing method was developed for sub-50 nm structures by integrating quantum dots (QDs) on patterned polymer substrates. Poly(styrene-alt-maleic anhydride) (PSMa) was prepared by the initiated chemical vapor ...

  17. Timing performance of 30-nm-wide superconducting nanowire avalanche photodetectors

    E-Print Network [OSTI]

    Najafi, Faraz

    We investigated the timing jitter of superconducting nanowire avalanche photodetectors (SNAPs, also referred to as cascade-switching superconducting single-photon detectors) based on 30-nm-wide nanowires. At bias currents ...

  18. Locating and tracking assets using RFID

    E-Print Network [OSTI]

    Kim, Gak Gyu

    2009-05-15T23:59:59.000Z

    . . . . . . . . . . . . . . . . . . . . . . . . 10 C. Different Technologies for Asset Tracking / Locating . . . . 10 1. Hand-held Reader . . . . . . . . . . . . . . . . . . . . 11 2. Fixed Reader Installed in Area . . . . . . . . . . . . . 11 3. Fixed Reader Installed at Chokepoint... . . . . . . . . . . . 34 a. CaseofInstallingtheFixedReaderintheMost Probable Area . . . . . . . . . . . . . . . . . . . . 35 b. Case of Installing the Fixed Reader in the Far- thest Area . . . . . . . . . . . . . . . . . . . . . . 36 3. Extension of Experiments...

  19. Recycling Bin Guide Locations and prices

    E-Print Network [OSTI]

    Kirschner, Denise

    Recycling Bin Guide Locations and prices Metal Bins Deskside Bins with Side Saddle Rubbermaid Bins.58 for auxiliaries. And Non-Public Areas Public Offices Non-Public Recyclables Recyclables RecyclablesTrash Trash Trash #12;New Recycling Bin Guidelines Frequently Asked Questions (as of December 2008) Why

  20. Ontology-based Disambiguation of Spatiotemporal Locations

    E-Print Network [OSTI]

    Hyvnen, Eero

    , in the semantic portal MuseumFinland3 [7] a location parton- omy4 was used for annotating museum artifacts. #12;A problem when creating a semantic cultural heritage portal is that places, both modernFinland originate from regions that no longer exist and/or are not part of Finland but of Russia with new names

  1. Transportation Networks and Location A Geometric Approach

    E-Print Network [OSTI]

    Palop del Río, Belén

    Transportation Networks and Location A Geometric Approach Belén Palop1,2 1Departamento de March 2009 Florida State University #12;Belén Palop, UVa, SUNY Outline Transportation Network Model;Transportation Network Model Belén Palop, UVa, SUNY Outline Transportation Network Model Network placement

  2. Exact Location : Date of Accident : AM PM

    E-Print Network [OSTI]

    Swaddle, John

    SSN Cell Phone Home Phone Work Phone Exact Location : Date of Accident : AM PM Date accident treatment provided? Yes No Where Was time lost from work? Yes No If yes, how long? Could this accident have the following information as soon as it relates to your work related accident/injury/illness within 72 hours

  3. BOSQUE REACH ARROYO DE LAS CAAS TO SOUTH BOUNDARY BOSQUE DEL

    E-Print Network [OSTI]

    Julien, Pierre Y.

    with funding from the U.S. Bureau of Reclamation in Albuquerque, NM, via U.S. Forest Service Contract: 07-JV

  4. Two Los Alamos National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    event in Albuquerque LOS ALAMOS, N.M., March 26, 2015-Los Alamos National Laboratory's Nuclear Material Control and Accountability Group and the Quality and Performance...

  5. TEC Information Security

    Broader source: Energy.gov (indexed) [DOE]

    External Coordination Working Group Information Security E. Ralph Smith, Manager Institutional Programs April 22, 2004 Albuquerque, NM WIPP * Open communications * Notifications *...

  6. Exceptional service in the national interest www.sandia.gov

    E-Print Network [OSTI]

    Laboratories P.O. Box 5800, MS-0351 Albuquerque, NM 87185-0351 Phone: (505) 844-1071 Fax: (505) 844-4394 E

  7. Exceptional service in the national interest www.sandia.gov

    E-Print Network [OSTI]

    Laboratories P.O. Box 5800, MS-0351 Albuquerque, NM 87185-0351 Phone: (505) 844-6385 Fax: (505) 844-4394 E

  8. Paper Title (use style: paper title)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sandia National Laboratories Albuquerque, NM, USA Abstract- High penetrations of PV on the distribution system can impact the operation of the grid and may require...

  9. Iterative Assembly of Helical Proteins by Optimal Hydrophobic Packing

    E-Print Network [OSTI]

    Coutsias, Evangelos

    , University of New Mexico, Albuquerque, NM 87131, USA 3Present address: Physical Biosciences Division generates an ensemble of viable interconnecting loops. After energy minimization and clustering, we use

  10. Other Participants 1991 | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Laboratory Lab Team, Rocky Flats Lab Team, Pacific Northwest Laboratory Lab Team, Solar Energy Research Institute La Cueva High School , Albuquerque , NM Lake Forest High...

  11. EIS-0283-S2-Summary-2012.pdf

    Broader source: Energy.gov (indexed) [DOE]

    88220 (575) 234-7348 DOE Public Reading Room Government Information Department Zimmerman LibraryUniversity of New Mexico 1 University of New Mexico Albuquerque, NM 87131 (505)...

  12. SAND2013-3790

    Office of Scientific and Technical Information (OSTI)

    Bridges University of New Mexico Department of Computer Science Mail stop: MSC01 1130 1 University of New Mexico Albuquerque, NM 87131-0001 Abstract Increased HPC capability...

  13. A Computational Study of the Aerodynamics and Aeroacoustics of...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratories, Albuquerque, NM, 87185-1124, USA C. Eric Lynch and Marilyn J. Smith Georgia Institute of Technology, Atlanta, Georgia, 30332-0150, USA This work...

  14. 2011 Annual Planning Summary for NNSA Service Center (NNSASC)

    Broader source: Energy.gov [DOE]

    The ongoing and projected Environmental Assessments and Environmental Impact Statements for 2011 and 2012 within the NNSA Service Center (Albuquerque Office, NM).

  15. TOUGH Simulations of the Updegraff's Set of Fluid and Heat Flow Problems

    E-Print Network [OSTI]

    Moridis, G.J.

    2010-01-01T23:59:59.000Z

    TN 37831 Tom E. Michener Battelle Pacific Northwest Lab. PO5800 Albuquerque, NM 87185 Battelle Memolial lnst. 505 King47906 Dr. Diana J. Holford Battelle Pacific Northwest Lab.

  16. Sandia National Laboratories: Sandia Receives Award for Electronics...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sandia Receives Award for Electronics Stewardship September 19, 2011 electronics stewardship award ALBUQUERQUE, N.M. - Sandia National Laboratories has received an award for...

  17. Thermodynamics Teacher Guide

    Broader source: Energy.gov (indexed) [DOE]

    Albuquerque, NM Catherine Norris, Raleigh, NC Don Pruett, Sumner, WA Larry Richards, Eaton, IN Barry Scott, French Camp, CA Regina Sizemore, Letcher, KY Joanne Spaziano,...

  18. Slide 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    model verification 6 Indoor testing (reported at 38 th PVSC) Conducted by CFV Solar Test Laboratory, Inc (Albuquerque, NM) HALM solar simlulator integrated with a...

  19. Which Models Matter: Uncertainty and Sensitivity Analysis for

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Models Matter: Uncertainty and Sensitivity Analysis for Photovoltaic Power Systems Clifford W. Hansen and Andrew Pohl Sandia National Laboratories, Albuquerque, NM, 87185-1033, USA...

  20. Exercise Design Laboratory

    Broader source: Energy.gov [DOE]

    The Emergency Operations Training Academy (EOTA), NA 40.2, Readiness and Training, Albuquerque, NM is pleased to announce the EXR231, Exercise Design Laboratory course

  1. Uranium and other heavy metals in the plant-animal-human food chain near abandoned mining sites and structures in an American Indian community in northwestern New Mexico

    E-Print Network [OSTI]

    Samuel-Nakamura, Christine

    2013-01-01T23:59:59.000Z

    in the Navajo Churchrock mining district. Environmentalpeople and uranium mining. Albuquerque, NM: University of2002). The history of uranium mining and the Navajo people.

  2. Accident Investigation of the December 11, 2013, Integrated Device...

    Broader source: Energy.gov (indexed) [DOE]

    Accidental Discharge at the Sandia National Laboratory Site 9920, Albuquerque, NM Accident Investigation of the December 11, 2013, Integrated Device Fireset and Detonator...

  3. CX-006953: Categorical Exclusion Determination | Department of...

    Energy Savers [EERE]

    Categorical Exclusion Determination Mesofluidic System for Automated Proteins Enrichment CX(s) Applied: B3.6 Date: 08032011 Location(s): Albuquerque, New Mexico Office(s):...

  4. 4.1.2 NANO FOUNTAIN PROBE WITH 40 NM WRITING RESOLUTION K.-H. Kim, N. Moldovan, H. D. Espinosa; "A Novel Nano Fountain Probe with sub-100 nm

    E-Print Network [OSTI]

    Shull, Kenneth R.

    4.1.2 NANO FOUNTAIN PROBE WITH 40 NM WRITING RESOLUTION K.-H. Kim, N. Moldovan, H. D. Espinosa; "A Novel Nano Fountain Probe with sub-100 nm Molecular Writing Resolution", Small, 2005, ASAP. Patent the first "nano-fountain pen" capable of depositing organic ink molecules in patterns as small as 40 nm

  5. RESIDENTIAL LOCATION CHOICE AND TRAVEL BEHAVIOR: IMPLICATIONS FOR AIR QUALITY

    E-Print Network [OSTI]

    Levinson, David M.

    RESIDENTIAL LOCATION CHOICE AND TRAVEL BEHAVIOR: IMPLICATIONS FOR AIR QUALITY UC Davis-Caltrans Air control measure. #12;RESIDENTIAL LOCATION CHOICE AND TRAVEL BEHAVIOR: IMPLICATIONS FOR AIR QUALITY.......................................................... 3 2.2 The Role of Residential Location Choice

  6. EA-2005: Chromium Plume Control Interim Measure And Plume-Center Characterization, Los Alamos National Laboratory, Los Alamos, NM

    Broader source: Energy.gov [DOE]

    EA-2005: Chromium Plume Control Interim Measure And Plume-Center Characterization, Los Alamos National Laboratory, Los Alamos, NM

  7. VCSEL fault location apparatus and method

    DOE Patents [OSTI]

    Keeler, Gordon A. (Albuquerque, NM); Serkland, Darwin K. (Albuquerque, NM)

    2007-05-15T23:59:59.000Z

    An apparatus for locating a fault within an optical fiber is disclosed. The apparatus, which can be formed as a part of a fiber-optic transmitter or as a stand-alone instrument, utilizes a vertical-cavity surface-emitting laser (VCSEL) to generate a test pulse of light which is coupled into an optical fiber under test. The VCSEL is subsequently reconfigured by changing a bias voltage thereto and is used as a resonant-cavity photodetector (RCPD) to detect a portion of the test light pulse which is reflected or scattered from any fault within the optical fiber. A time interval .DELTA.t between an instant in time when the test light pulse is generated and the time the reflected or scattered portion is detected can then be used to determine the location of the fault within the optical fiber.

  8. Automated Fault Location In Smart Distribution Systems

    E-Print Network [OSTI]

    Lotfifard, Saeed

    2012-10-19T23:59:59.000Z

    Quality Meters (PQM), are installed to capture harmonics and certain disturbances for analyzing the power quality indices. Digital Protective Relays are utilized to detect occurrence of the faults and isolate faulted section as fast as possible. Digital... Protective Relays) use synchronous methods [28]. Therefore, if the available data is provided by RTUs, fault location methods that operate based on direct comparison of the input samples cannot be 17 utilized. However, if the data could be gathered from...

  9. Evaluation of workplace air monitoring locations

    SciTech Connect (OSTI)

    Stoetzel, G.A.; Cicotte, G.R.; Lynch, T.P. (Pacific Northwest Lab., Richland, WA (United States)); Aldrich, L.K. (Westinghouse Hanford Co., Richland, WA (United States))

    1991-10-01T23:59:59.000Z

    Current federal guidance on occupational radiation protection recognizes the importance of conducting air flow studies to assist in the placement of air sampling and monitoring equipment. In support of this, Pacific Northwest Laboratory has provided technical assistance to Westinghouse Hanford Company for the purpose of evaluating the adequacy of air sampling and monitoring locations at selected Hanford facilities. Qualitative air flow studies were performed using smoke aerosols to visually determine air movement. Three examples are provided of how air flow studies results, along with information on the purpose of the air sample being collected, were used as a guide in placing the air samplers and monitors. Preparatory steps in conducting an air flow study should include: (1) identifying type of work performed in the work area including any actual or potential release points; (2) determining the amounts of radioactive material available for release and its chemical and physical form; (3) obtaining accurate work area descriptions and diagrams; (4) identifying the location of existing air samplers and monitors; (5) documenting physical and ventilation configurations; (6) notifying appropriate staff of the test; and (7) obtaining necessary equipment and supplies. The primary steps in conducting an air flow study are measurements of air velocities in the work area, release of the smoke aerosol at selected locations in the work area and the observation of air flow patterns, and finally evaluation and documentation of the results. 2 refs., 3 figs.

  10. Optical breakdown threshold investigation of 1064 nm laser induced air plasmas

    SciTech Connect (OSTI)

    Thiyagarajan, Magesh; Thompson, Shane [Plasma Engineering Research Lab (PERL), College of Science and Engineering, Texas A and M University-Corpus Christi, Texas 78412 (United States)

    2012-04-01T23:59:59.000Z

    We present the theoretical and experimental measurements and analysis of the optical breakdown threshold for dry air by 1064 nm infrared laser radiation and the significance of the multiphoton and collisional cascade ionization process on the breakdown threshold measurements over pressures range from 10 to 2000 Torr. Theoretical estimates of the breakdown threshold laser intensities and electric fields are obtained using two distinct theories namely multiphoton and collisional cascade ionization theories. The theoretical estimates are validated by experimental measurements and analysis of laser induced breakdown processes in dry air at a wavelength of 1064 nm by focusing 450 mJ max, 6 ns, 75 MW max high-power 1064 nm IR laser radiation onto a 20 {mu}m radius spot size that produces laser intensities up to 3 - 6 TW/cm{sup 2}, sufficient for air ionization over the pressures of interest ranging from 10 to 2000 Torr. Analysis of the measured breakdown threshold laser intensities and electric fields are carried out in relation with classical and quantum theoretical ionization processes, operating pressures. Comparative analysis of the laser air breakdown results at 1064 nm with corresponding results of a shorter laser wavelength (193 nm) [M. Thiyagarajan and J. E. Scharer, IEEE Trans. Plasma Sci. 36, 2512 (2008)] and a longer microwave wavelength (10{sup 8} nm) [A. D. MacDonald, Microwave Breakdown in Gases (Wiley, New York, 1966)]. A universal scaling analysis of the breakdown threshold measurements provided a direct comparison of breakdown threshold values over a wide range of frequencies ranging from microwave to ultraviolet frequencies. Comparison of 1064 nm laser induced effective field intensities for air breakdown measurements with data calculated based on the collisional cascade and multiphoton breakdown theories is used successfully to determine the scaled collisional microwave portion. The measured breakdown threshold of 1064 nm laser intensities are then scaled to classical microwave breakdown theory after correcting for the multiphoton ionization process for different pressures and good agreement, regarding both pressure dependence and breakdown threshold electric fields, is obtained. The effect of the presence of submicron particles on the 1064 nm breakdown threshold was also investigated. The measurements show that higher breakdown field is required, especially at lower pressures, and in close agreement with classical microwave breakdown theory and measurements in air.

  11. EIS-0463: Notice of Public Meeting Location Change | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Location Change EIS-0463: Notice of Public Meeting Location Change Presidential Permit Application for Northern Pass Transmission, New Hampshire On September 6, 2013, DOE...

  12. Optimization Online - p-facility Huff location problem on networks

    E-Print Network [OSTI]

    Rafael Blanquero

    2014-10-30T23:59:59.000Z

    Oct 30, 2014 ... Abstract: The p-facility Huff location problem aims at locating facilities on a competitive environment so as to maximize the market share.

  13. SANDIA REPORT;SF 1075-SUR

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NM 87110 Smith Engineering Company 2201 San Pedro NE, 4 Suite 200 Albuquerque NM 87110 Smith Engineering Company P.O. Box 2565 Roswell NM 88202-2565 Souder Miller & Associates...

  14. The SEMATECH Berkeley microfield exposure tool: learning a the 22-nm node and beyond

    SciTech Connect (OSTI)

    Naulleau, Patrick; Anderson, Christopher; Baclea-an, Lorie-Mae; Denham, Paul; George, Simi; Goldberg, Kenneth A.; Goldstein, Michael; Hoef, Brian; Hudyma, Russ; Jones, Gideon; Koh, Chawon; La Fontaine, Bruno; McClinton, Brittany; Miyakawa, Ryan; Montgomery, Warren; Roller, John; Wallow, Tom; Wurm, Stefan

    2009-02-16T23:59:59.000Z

    Microfield exposure tools (METs) continue to playa dominant role in the development of extreme ultraviolet (EUV) resists. One of these tools is the SEMATECH Berkeley 0.3-NA MET operating as a SEMATECH resist and mask test center. Here we present an update summarizing the latest resist test and characterization results. The relatively small numerical aperture and limited illumination settings expected from 1st generation EUV production tools make resist resolution a critical issue even at the 32-nm node. In this presentation, sub 22 nm half pitch imaging results of EUV resists are reported. We also present contact hole printing at the 30-nm level. Although resist development has progressed relatively well in the areas of resolution and sensitivity, line-edge-roughness (LER) remains a significant concern. Here we present a summary of recent LER performance results and consider the effect of system-level contributors to the LER observed from the SEMA TECH Berkeley microfield tool.

  15. A compact ultranarrow high-power laser system for experiments with 578nm Ytterbium clock transition

    E-Print Network [OSTI]

    Cappellini, Giacomo; Mancini, Marco; Pagano, Guido; Pizzocaro, Marco; Fallani, Leonardo; Catani, Jacopo

    2015-01-01T23:59:59.000Z

    In this paper we present the realization of a compact, high-power laser system able to excite the Ytterbium clock transition at 578 nm. Starting from an external-cavity laser based on a quantum dot chip at 1156 nm with an intra-cavity electro-optic modulator, we were able to obtain up to 60 mW of visible light at 578 nm via frequency doubling. The laser is locked with a 500 kHz bandwidth to a ultra-low-expansion glass cavity stabilized at its zero coefficient of thermal expansion temperature through an original thermal insulation and correction system. This laser allowed the observation of the clock transition in fermionic $^{173}$Yb with a < 50 Hz linewidth over 5 minutes, limited only by a residual frequency drift of some 0.1 Hz/s.

  16. Pattern Alteration: Location of Bust Fullness

    E-Print Network [OSTI]

    2006-08-04T23:59:59.000Z

    ). Figure 1. Bodice with Darts Darts should point toward the fullest part of the bust, ending ? to 1 ? inches (1 to 4 cm) from its tip. This depends on the garment style, your fi gure and personal preference. The Personal Measurement Chart (line 6) can... help you deter- mine the position of your bust point on the pattern. If your measurement and the pattern bust point location differ, you need an alteration. 1. To fi nd the bust point on a basic pattern, extend the center lines of the darts until...

  17. Location of laccase in ordered mesoporous materials

    SciTech Connect (OSTI)

    Mayoral, lvaro [Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Edificio I - D, Mariano Esquillor, 50018 Zaragoza (Spain); Gascn, Victoria; Blanco, Rosa M.; Mrquez-lvarez, Carlos; Daz, Isabel, E-mail: idiaz@icp.csic.es [Instituto de Catlisis y Petroleoqumica, CSIC, c/Marie Curie 2, 28049 Madrid (Spain)

    2014-11-01T23:59:59.000Z

    The functionalization with amine groups was developed on the SBA-15, and its effect in the laccase immobilization was compared with that of a Periodic Mesoporous Aminosilica. A method to encapsulate the laccase in situ has now been developed. In this work, spherical aberration (C{sub s}) corrected scanning transmission electron microscopy combined with high angle annular dark field detector and electron energy loss spectroscopy were applied to identify the exact location of the enzyme in the matrix formed by the ordered mesoporous solids.

  18. GE Global Research Locations | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHall ATours,Dioxide and MethaneLocations GE

  19. Our Locations | National Nuclear Security Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > TheNuclear Astrophysics One ofSpeedingthisOur HistoryHistoryLocations |

  20. Location-Tracking Applications ecent technological advances in wireless loca-

    E-Print Network [OSTI]

    Gruteser, Marco

    areas they have visited. #12;Location-Tracking Applications broker as part of their service contract

  1. Locating a Recycling Center: The General Density Case Jannett Highfill

    E-Print Network [OSTI]

    Mou, Libin

    Locating a Recycling Center: The General Density Case Jannett Highfill Department of Economics) 677-3374. #12;2 Locating a Recycling Center: The General Density Case Abstract: The present paper considers a municipality that has a landfill (fixed in location) and plans to optimally locate a "recycling

  2. A high-power 626 nm diode laser system for Beryllium ion trapping

    E-Print Network [OSTI]

    H. Ball; M. W. Lee; S. D. Gensemer; M. J. Biercuk

    2013-04-07T23:59:59.000Z

    We describe a high-power, frequency-tunable, external cavity diode laser (ECDL) system near 626 nm useful for laser cooling of trapped $^9$Be$^+$ ions. A commercial single-mode laser diode with rated power output of 170 mW at 635 nm is cooled to $\\approx - 31$ C, and a single longitudinal mode is selected via the Littrow configuration. In our setup, involving multiple stages of thermoelectric cooling, we are able to obtain $\\approx$130 mW near 626 nm, sufficient for efficient frequency doubling to the required Doppler cooling wavelengths near 313 nm in ionized Beryllium. In order to improve nonlinear frequency conversion efficiency, we achieve larger useful power via injection locking of a slave laser. In this way the entirety of the slave output power is available for frequency doubling, while analysis may be performed on the master output. We believe that this simple laser system addresses a key need in the ion trapping community and dramatically reduces the cost and complexity associated with Beryllium ion trapping experiments.

  3. Development of a 1319-nm Laser Radar Using Fiber Optics and RF Pulse Compression

    E-Print Network [OSTI]

    Kansas, University of

    Development of a 1319-nm Laser Radar Using Fiber Optics and RF Pulse Compression Christopher T of this concept. Our laboratory breadboard uses standard, single-mode optical fiber, off-the-shelf fiber-optic IMPLEMENTATION 3.1 Transmitter--Single-mode laser 3.2 Transmitter--Single-mode fiber 3.3 Transmitter--Optical

  4. Highly efficient semiconductor optical amplifier for the 820-860-nm spectral range

    SciTech Connect (OSTI)

    Lobintsov, A A; Shramenko, M V [Superlum Diodes Ltd., Moscow (Russian Federation); Uspenskii, Mikhail B; Shishkin, Viktor A [M.F. Stel'makh Polyus Research and Development Institute, Moscow (Russian Federation); Yakubovich, S D [Moscow State Institute of Radio-Engineering, Electronics and Automation (Technical University), Moscow (Russian Federation)

    2010-06-23T23:59:59.000Z

    A single-pass optical amplifier with a gain up to 32 dB at a wavelength of 840 nm is developed. Its high reliability is demonstrated at a single-mode fibre-coupled cw output power up to 50 mW. Examples of efficient application of this amplifier in MOPA systems are presented. (lasers)

  5. Laser amplification at 18. 2 nm in recombining plasma from a laser-irradiated carbon fiber

    SciTech Connect (OSTI)

    Chenais-Popovics, C.; Corbett, R.; Hooker, C.J.; Key, M.H.; Kiehn, G.P.; Lewis, C.L.S.; Pert, G.J.; Regan, C.; Rose, S.J.; Sadaat, S.

    1987-11-09T23:59:59.000Z

    Extreme ultraviolet laser amplification has been observed for the C VI Balmer-..cap alpha.. transition at 18.2 nm, with use of a novel optical system to irradiate up to 1 cm length of carbon fiber target. The measurements were time resolved and indicated peak single-transit amplification of about 30 times.

  6. A 90nm CMOS Direct Conversion Transmitter for WCDMA Xuemin Yang1

    E-Print Network [OSTI]

    A 90nm CMOS Direct Conversion Transmitter for WCDMA Xuemin Yang1 , Anosh Davierwalla2 , David Mann3 IBM, Burlington, VT Abstract -- A linear high output power CMOS direct conversion transmitter for wide?5 QFN. Index Terms -- direct conversion, CMOS, WCDMA, transmitter, third order distortion cancellation

  7. Efficient methylammonium lead iodide perovskite solar cells with active layers from 300 to 900 nm

    SciTech Connect (OSTI)

    Momblona, C.; Malinkiewicz, O.; Soriano, A.; Gil-Escrig, L.; Bandiello, E.; Scheepers, M.; Bolink, H. J., E-mail: henk.bolink@uv.es [Instituto de Ciencia Molecular, Universidad de Valencia, C/Catedrtico J. Beltrn 2, 46980 Paterna, Valencia (Spain); Roldn-Carmona, C. [Instituto de Ciencia Molecular, Universidad de Valencia, C/Catedrtico J. Beltrn 2, 46980 Paterna, Valencia (Spain); Department of Physical Chemistry and Applied Thermodynamics, University of Crdoba, Campus Rabanales, Ed. C3, 14014, Crdoba (Spain); Edri, E. [Department of Materials and Interfaces, Weizmann Institute of Science, Herzl St. 34, Rehovot 76100 (Israel)

    2014-08-01T23:59:59.000Z

    Efficient methylammonium lead iodide perovskite-based solar cells have been prepared in which the perovskite layer is sandwiched in between two organic charge transporting layers that block holes and electrons, respectively. This configuration leads to stable and reproducible devices that do not suffer from strong hysteresis effects and when optimized lead to efficiencies close to 15%. The perovskite layer is formed by using a dual-source thermal evaporation method, whereas the organic layers are processed from solution. The dual-source thermal evaporation method leads to smooth films and allows for high precision thickness variations. Devices were prepared with perovskite layer thicknesses ranging from 160 to 900 nm. The short-circuit current observed for these devices increased with increasing perovskite layer thickness. The main parameter that decreases with increasing perovskite layer thickness is the fill factor and as a result optimum device performance is obtained for perovskite layer thickness around 300 nm. However, here we demonstrate that with a slightly oxidized electron blocking layer the fill factor for the solar cells with a perovskite layer thickness of 900 nm increases to the same values as for the devices with thin perovskite layers. As a result the power conversion efficiencies for the cells with 300 and 900 nm are very similar, 12.7% and 12%, respectively.

  8. Performance of a High-Concentration Erbium-Doped Fiber Amplifier with 100 nm Amplification Bandwidth

    SciTech Connect (OSTI)

    Hajireza, P.; Shahabuddin, N. S.; Abbasi-Zargaleh, S.; Emami, S. D.; Abdul-Rashid, H. A.; Yusoff, Z. [Center for Advanced Devices and Systems, Faculty of Engineering, Multimedia University, 63100 Cyberjaya (Malaysia)

    2010-07-07T23:59:59.000Z

    Increasing demand for higher bandwidth has driven the need for higher Wavelength Division Multiplexing (WDM) channels. One of the requirements to achieve this is a broadband amplifier. This paper reports the performance of a broadband, compact, high-concentration and silica-based erbium-doped fiber amplifier. The amplifier optimized to a 2.15 m long erbium-doped fiber with erbium ion concentration of 2000 ppm. The gain spectrum of the amplifier has a measured amplification bandwidth of 100 nm using a 980 nm laser diode with power of 150 mW. This silica-based EDFA shows lower noise figure, higher gain and wider bandwidth in shorter wavelengths compared to Bismuth-based EDFA with higher erbium ion concentration of 3250 ppm at equivalent EDF length. The silica-based EDF shows peak gain at 22 dB and amplification bandwidth between 1520 nm and 1620 nm. The lowest noise figure is 5 dB. The gain is further improved with the implementation of enhanced EDFA configurations.

  9. An EUV Fresnel zoneplate mask-imaging microscope for lithography generations reaching 8 nm

    E-Print Network [OSTI]

    An EUV Fresnel zoneplate mask-imaging microscope for lithography generations reaching 8 nm Kenneth lithography design rules. The proposed microscope features an array of user-selectable Fresnel zoneplate-EUV, Fresnel zoneplate microscope, the AIT has been in the vanguard of high-resolution EUV mask imaging

  10. FIRST LASING AT 32 NM OF THE VUV-FEL AT DESY S. Schreiber

    E-Print Network [OSTI]

    FIRST LASING AT 32 NM OF THE VUV-FEL AT DESY S. Schreiber , DESY, Hamburg, Germany for the VUV-FEL team Abstract The VUV-FEL is a free electron laser user facility being commissioned at DESY. It is based on the TTF-FEL, which was in operation until end of 2002 providing a photon beam for two pilot

  11. 1-10 nM E2 E2 30 E2

    E-Print Network [OSTI]

    Kawato, Suguru

    076 1. E2 E2 E2 E2 2. E2 E2 2 E2 1 1-10 nM E2 5), 7) E2 30 E2 7) E2 512076-0792011 Modulation of Learning and Memory slowly but also rapidly. Slow actions of estradiol (E2) occur via nuclear receptors (ER), while rapid E2

  12. Diode-pumped Nd:YAG laser emitting at 899 nm Marc Castaing

    E-Print Network [OSTI]

    Boyer, Edmond

    technologies have been developed to reach the blue range: GaN la- ser diodes, frequency-doubled laser diodes to the doping percentage, P cm-2 the absorption cross section at the pump wavelength 808 nm , A s-1 the inverse

  13. Sub-10 nm Self-Enclosed Self-Limited Nanofluidic Channel Arrays

    E-Print Network [OSTI]

    Sub-10 nm Self-Enclosed Self-Limited Nanofluidic Channel Arrays Qiangfei Xia, Keith J. Morton report a new method to fabricate self-enclosed optically transparent nanofluidic channel arrays with sub. Here we propose and demonstrate a new method to fabricate enclosed optically transparent nanofluidic

  14. Locating hardware faults in a parallel computer

    DOE Patents [OSTI]

    Archer, Charles J.; Megerian, Mark G.; Ratterman, Joseph D.; Smith, Brian E.

    2010-04-13T23:59:59.000Z

    Locating hardware faults in a parallel computer, including defining within a tree network of the parallel computer two or more sets of non-overlapping test levels of compute nodes of the network that together include all the data communications links of the network, each non-overlapping test level comprising two or more adjacent tiers of the tree; defining test cells within each non-overlapping test level, each test cell comprising a subtree of the tree including a subtree root compute node and all descendant compute nodes of the subtree root compute node within a non-overlapping test level; performing, separately on each set of non-overlapping test levels, an uplink test on all test cells in a set of non-overlapping test levels; and performing, separately from the uplink tests and separately on each set of non-overlapping test levels, a downlink test on all test cells in a set of non-overlapping test levels.

  15. InGaAs/InP DHBTs WITH A 75nm COLLECTOR, 20nm BASE DEMONSTRATING 544 GHz f , BVCEO = 3.2V, and BVCBO = 3.4V

    E-Print Network [OSTI]

    Rodwell, Mark J. W.

    InGaAs/InP DHBTs WITH A 75nm COLLECTOR, 20nm BASE DEMONSTRATING 544 GHz f , BVCEO = 3.2V, and BVCBOGaAs base and a 75 nm InP collector containing an InGaAs/InAlAs superlattice grade. These devices exhibit collector thickness for any HBT. The devices have been scaled vertically for reduced base and collector

  16. Part I:Part I: Degradation in 3.2 nm Gate Oxides:Degradation in 3.2 nm Gate Oxides: Effects on Inverter Performance and MOSFETEffects on Inverter Performance and MOSFET

    E-Print Network [OSTI]

    Anlage, Steven

    1 Part I:Part I: Degradation in 3.2 nm Gate Oxides:Degradation in 3.2 nm Gate Oxides: Effects--Thin GateThin Gate Oxide DegradationOxide Degradation #12;2 AcknowledgmentsAcknowledgments University), ECE Miles Wiscombe (UG), ECE #12;3 Part I:Part I: Degradation in 3.2 nm Gate Oxides:Degradation in 3

  17. MobiEyes: A Distributed Location Monitoring Service Using Moving Location Queries

    E-Print Network [OSTI]

    Liu, Ling

    , distributed algorithms, mobile data management. 1 INTRODUCTION WITH the growing availability of mobile-sensitive resource management. The former uses location data to tailor the information delivered to the mobile users traffic and weather. Examples include systems for fleet manage- ment, mobile workforce management

  18. The effect of pulse duration on the growth rate of laser-induced damage sites at 351 nm on fused silica surfaces

    SciTech Connect (OSTI)

    Negres, R A; Norton, M A; Liao, Z M; Cross, D A; Bude, J D; Carr, C W

    2009-10-29T23:59:59.000Z

    Past work in the area of laser-induced damage growth has shown growth rates to be primarily dependent on the laser fluence and wavelength. More recent studies suggest that growth rate, similar to the damage initiation process, is affected by a number of additional parameters including pulse duration, pulse shape, site size, and internal structure. In this study, we focus on the effect of pulse duration on the growth rate of laser damage sites located on the exit surface of fused silica optics. Our results demonstrate, for the first time, a significant dependence of growth rate at 351 nm on pulse duration from 1 ns to 15 ns as {tau}{sup 0.3} for sites in the 50-100 {micro}m size range.

  19. Fault Locating, Prediction and Protection (FLPPS)

    SciTech Connect (OSTI)

    Yinger, Robert, J.; Venkata, S., S.; Centeno, Virgilio

    2010-09-30T23:59:59.000Z

    One of the main objectives of this DOE-sponsored project was to reduce customer outage time. Fault location, prediction, and protection are the most important aspects of fault management for the reduction of outage time. In the past most of the research and development on power system faults in these areas has focused on transmission systems, and it is not until recently with deregulation and competition that research on power system faults has begun to focus on the unique aspects of distribution systems. This project was planned with three Phases, approximately one year per phase. The first phase of the project involved an assessment of the state-of-the-art in fault location, prediction, and detection as well as the design, lab testing, and field installation of the advanced protection system on the SCE Circuit of the Future located north of San Bernardino, CA. The new feeder automation scheme, with vacuum fault interrupters, will limit the number of customers affected by the fault. Depending on the fault location, the substation breaker might not even trip. Through the use of fast communications (fiber) the fault locations can be determined and the proper fault interrupting switches opened automatically. With knowledge of circuit loadings at the time of the fault, ties to other circuits can be closed automatically to restore all customers except the faulted section. This new automation scheme limits outage time and increases reliability for customers. The second phase of the project involved the selection, modeling, testing and installation of a fault current limiter on the Circuit of the Future. While this project did not pay for the installation and testing of the fault current limiter, it did perform the evaluation of the fault current limiter and its impacts on the protection system of the Circuit of the Future. After investigation of several fault current limiters, the Zenergy superconducting, saturable core fault current limiter was selected for installation. Because of some testing problems with the Zenergy fault current limiter, installation was delayed until early 2009 with it being put into operation on March 6, 2009. A malfunction of the FCL controller caused the DC power supply to the superconducting magnet to be turned off. This inserted the FCL impedance into the circuit while it was in normal operation causing a voltage resonance condition. While these voltages never reached a point where damage would occur on customer equipment, steps were taken to insure this would not happen again. The FCL was reenergized with load on December 18, 2009. A fault was experienced on the circuit with the FCL in operation on January 14, 2010. The FCL operated properly and reduced the fault current by about 8%, what was expected from tests and modeling. As of the end of the project, the FCL was still in operation on the circuit. The third phase of the project involved the exploration of several advanced protection ideas that might be at a state where they could be applied to the Circuit of the Future and elsewhere in the SCE electrical system. Based on the work done as part of the literature review and survey, as well as a number of internal meetings with engineering staff at SCE, a number of ideas were compiled. These ideas were then evaluated for applicability and ability to be applied on the Circuit of the Future in the time remaining for the project. Some of these basic ideas were implemented on the circuit including measurement of power quality before and after the FCL. It was also decided that we would take what was learned as part of the Circuit of the Future work and extend it to the next generation circuit protection for SCE. Also at this time, SCE put in a proposal to the DOE for the Irvine Smart Grid Demonstration using ARRA funding. SCE was successful in obtaining funding for this proposal, so it was felt that exploration of new protection schemes for this Irvine Smart Grid Demonstration would be a good use of the project resources. With this in mind, a protection system that uses fault interrupting switches, hi

  20. Implementation of a doubling cavity to produce a 423 nm light source for the excitation of Ca isotopes

    SciTech Connect (OSTI)

    Higashimaru, H.; Kitajima, T.; Hasegawa, S. [Department of Quantum Engineering and Systems Science, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan)

    2009-03-17T23:59:59.000Z

    For selective excitation of isotopes of Ca, a 423 nm narrow linewidth, continuous wave (CW) light source which corresponds to the S-P transition (4s{sup 21}S{sub 0}-4s4p {sup 1}P{sub 1}) is required. A solid state CW light source which generates 423 nm is difficult to commercially use. Therefore, we have developed a Second Harmonic Generation (SHG) system to obtain 423 nm lights from 846 nm lights by using a nonlinear optical crystal.

  1. Laser-plasma source parameters for Kr, Gd, and Tb ions at 6.6 nm

    SciTech Connect (OSTI)

    Masnavi, Majid; Szilagyi, John; Parchamy, Homaira; Richardson, Martin C. [The Townes Laser Institute, College of Optics and Photonics, University of Central Florida, 4000 Central Florida Blvd., Orlando, Florida 32816 (United States)] [The Townes Laser Institute, College of Optics and Photonics, University of Central Florida, 4000 Central Florida Blvd., Orlando, Florida 32816 (United States)

    2013-04-22T23:59:59.000Z

    There is increasing interest in extreme-ultraviolet (EUV) laser-based lamps for sub-10-nm lithography operating in the region of 6.6 nm. A collisional-radiative model is developed as a post-processor of a hydrodynamic code to investigate emission from resonance lines in Kr, Gd, and Tb ions under conditions typical for mass-limited EUV sources. The analysis reveals that maximum conversion efficiencies of Kr occur at 5 Multiplication-Sign 10{sup 10}W/cm{sup 2}, while for Gd and Tb it was Asymptotically-Equal-To 0.9%/2{pi}sr for laser intensities of (2-5) Multiplication-Sign 10{sup 12}W/cm{sup 2}.

  2. Promethium-doped phosphate glass laser at 933 and 1098 nm

    SciTech Connect (OSTI)

    Krupke, W.F.; Shinn, M.D.; Kirchoff, T.A.; Finch, C.B.; Boatner, L.A.

    1987-12-28T23:59:59.000Z

    A promethium (Pm/sup 3 +/) laser has been demonstrated for the first time. Trivalent promethium 147 doped into a lead-indium-phosphate glass etalon was used to produce room-temperature four-level laser emission at wavelengths of 933 and 1098 nm. Spectroscopic and kinetic measurements have shown that Pm/sup 3 +/ is similar to Nd/sup 3 +/ as a laser active ion.

  3. Investigation of a Polarization Controller in Titanium Diffused Lithium Niobate Waveguide near 1530 nm Wavelength

    E-Print Network [OSTI]

    Sung, Won Ju

    2013-12-10T23:59:59.000Z

    INVESTIGATION OF A POLARIZATION CONTROLLER IN TITANIUM DIFFUSED LITHIUM NIOBATE WAVEGUIDE NEAR 1530 NM WAVELENGTH A Dissertation by WON JU SUNG Submitted to the Office of Graduate and Professional Studies of Texas A&M University... systems are being commercialized [1-3], and efforts for 400G modulators are being pursued [1, 4]. Various materials have been explored for high speed devices need [5, 6], and lithium niobate remains the most attractive choice currently [7]. Fiber...

  4. Formation of Micro and Nano Structures Using VUV 157 nm Laser Radiation

    SciTech Connect (OSTI)

    Walton, C. D.; Cockcroft, S. [Physics, Department of Physical Sciences, University of Hull, HU6 7RX (United Kingdom)

    2010-10-08T23:59:59.000Z

    We report on laser ablation experiments on micro and nano size composite structures. The surface of CR-39 and polycarbonate has been intentionally seeded with silicon carbide and silver nanowires and subsequently laser irradiated at a wavelength of 157 nm. We show scanning electron micrograph images of prismatic and conical structures produced by laser ablation and discuss a shape transformation from a prismatic to a conical structure.

  5. Table 1 Comparison of potential sub-10 nm III-V device architectures

    E-Print Network [OSTI]

    del Alamo, Jess A.

    Extremely-Thin-Body (ETB) InAs quantum-well (QW) MOSFETs with improved electrostatics down to Lg = 50 nm (SAs channel. The ETB channel does not significantly degrade transport properties as evidenced by gm >1.5 mS/m and vinj = 2.4 107 cm/s. ETB-QW InAs MOSFET with scaled body for Improved Electrostatics T.-W. Kim, D

  6. InGaAsP/InGaP buried heterostructure lasers at 810 nm

    SciTech Connect (OSTI)

    Wakao, K.; Isozumi, S.; Nishi, H.; Ohsaka, S.

    1984-12-01T23:59:59.000Z

    InGaAsP/InGaP buried heterostructure lasers emitting at 810 nm have been grown on GaAs substrates using two-step liquid-phase epitaxy. A threshold current of 79 mA and an external differential quantum efficiency of 26% are obtained. Fundamental transverse mode operation up to 3 mW is achieved in the laser with the active region of 3.5 ..mu..m wide.

  7. Homodyne impulse radar hidden object locator

    DOE Patents [OSTI]

    McEwan, T.E.

    1996-04-30T23:59:59.000Z

    An electromagnetic detector is designed to locate an object hidden behind a separator or a cavity within a solid object. The detector includes a PRF generator for generating 2 MHz pulses, a homodyne oscillator for generating a 2 kHz square wave, and for modulating the pulses from the PRF generator. A transmit antenna transmits the modulated pulses through the separator, and a receive antenna receives the signals reflected off the object. The receiver path of the detector includes a sample and hold circuit, an AC coupled amplifier which filters out DC bias level shifts in the sample and hold circuit, and a rectifier circuit connected to the homodyne oscillator and to the AC coupled amplifier, for synchronously rectifying the modulated pulses transmitted over the transmit antenna. The homodyne oscillator modulates the signal from the PRF generator with a continuous wave (CW) signal, and the AC coupled amplifier operates with a passband centered on that CW signal. The present detector can be used in several applications, including the detection of metallic and non-metallic objects, such as pipes, studs, joists, nails, rebars, conduits and electrical wiring, behind wood wall, ceiling, plywood, particle board, dense hardwood, masonry and cement structure. The detector is portable, light weight, simple to use, inexpensive, and has a low power emission which facilitates the compliance with Part 15 of the FCC rules. 15 figs.

  8. Borehole locations on seven interior salt domes

    SciTech Connect (OSTI)

    Simcox, A.C.; Wampler, S.L.

    1982-08-01T23:59:59.000Z

    This report is designed as an inventory of all wells known to have been drilled within a five-mile radius of each of seven salt domes within the Interior Salt Basin in east Texas, northern Louisiana and Mississippi. There are 72 boreholes that entered salt above an elevation of -3000 feet mean sea level. For these, details of location, drilling dates, depth of casing and cement, elevation of top of caprock and salt, etc., are given on tables in the appendix. Of the seven domes, Oakwood has the largest number of boreholes, thirty-eight (including two sidetracked wells) that enter the salt stock above -3000 feet mean sea level; another dome in northeast Texas, Keechi, has eight; in northern Louisiana, Rayburn's has four and Vacherie has five; in southern Mississippi, Cypress Creek has seven, Lampton has one, and Richton has nine. In addition, all wells known outside the supra-domal area, but within a five-mile radius of the center of the 7 domes are separately catalogued.

  9. SAPLE: Sandia Advanced Personnel Locator Engine.

    SciTech Connect (OSTI)

    Procopio, Michael J.

    2010-04-01T23:59:59.000Z

    We present the Sandia Advanced Personnel Locator Engine (SAPLE) web application, a directory search application for use by Sandia National Laboratories personnel. SAPLE's purpose is to return Sandia personnel 'results' as a function of user search queries, with its mission to make it easier and faster to find people at Sandia. To accomplish this, SAPLE breaks from more traditional directory application approaches by aiming to return the correct set of results while placing minimal constraints on the user's query. Two key features form the core of SAPLE: advanced search query interpretation and inexact string matching. SAPLE's query interpretation permits the user to perform compound queries when typing into a single search field; where able, SAPLE infers the type of field that the user intends to search on based on the value of the search term. SAPLE's inexact string matching feature yields a high-quality ranking of personnel search results even when there are no exact matches to the user's query. This paper explores these two key features, describing in detail the architecture and operation of SAPLE. Finally, an extensive analysis on logged search query data taken from an 11-week sample period is presented.

  10. Homodyne impulse radar hidden object locator

    DOE Patents [OSTI]

    McEwan, Thomas E. (Livermore, CA)

    1996-01-01T23:59:59.000Z

    An electromagnetic detector is designed to locate an object hidden behind a separator or a cavity within a solid object. The detector includes a PRF generator for generating 2 MHz pulses, a homodyne oscillator for generating a 2 kHz square wave, and for modulating the pulses from the PRF generator. A transmit antenna transmits the modulated pulses through the separator, and a receive antenna receives the signals reflected off the object. The receiver path of the detector includes a sample and hold circuit, an AC coupled amplifier which filters out DC bias level shifts in the sample and hold circuit, and a rectifier circuit connected to the homodyne oscillator and to the AC coupled amplifier, for synchronously rectifying the modulated pulses transmitted over the transmit antenna. The homodyne oscillator modulates the signal from the PRF generator with a continuous wave (CW) signal, and the AC coupled amplifier operates with a passband centered on that CW signal. The present detector can be used in several applications, including the detection of metallic and non-metallic objects, such as pipes, studs, joists, nails, rebars, conduits and electrical wiring, behind wood wall, ceiling, plywood, particle board, dense hardwood, masonry and cement structure. The detector is portable, light weight, simple to use, inexpensive, and has a low power emission which facilitates the compliance with Part 15 of the FCC rules.

  11. TAGGING, TRACKING AND LOCATING WITHOUT GPS

    SciTech Connect (OSTI)

    Cordaro, J.; Coleman, T.; Shull, D.

    2012-07-08T23:59:59.000Z

    The Savannah River National Laboratory (SRNL) was requested to lead a Law Enforcement Working Group that was formed to collaborate on common operational needs. All agencies represented on the working group ranked their need to tag, track, and locate a witting or unwitting target as their highest priority. Specifically, they were looking for technologies more robust than Global Positioning Satellite (GPS), could communicate back to the owner, and worked where normal cell phone communications did not work or were unreliable. SRNL brought together multiple technologies in a demonstration that was held in in various Alaska venues, including metropolitan, wilderness, and at-sea that met the working group's requirements. Using prototypical technologies from Boeing, On Ramp, and Fortress, SRNL was able to demonstrate the ability to track personnel and material in all scenarios including indoors, in heavily wooden areas, canyons, and in parking garages. In all cases GPS signals were too weak to measure. Bi-directional communication was achieved in areas that Wi-Fi, cell towers, or traditional radios would not perform. The results of the exercise will be presented. These technologies are considered ideal for tracking high value material such has nuclear material with a platform that allows seamless tracking anywhere in the world, indoors or outdoors.

  12. Etherthreads : an infrastructure for location-based messages

    E-Print Network [OSTI]

    Lassey, Bradford, 1980-

    2004-01-01T23:59:59.000Z

    This thesis proposes an infrastructure for location-based services for Bluetooth enabled cellular phones. Specifically, it explores the use of this architecture in a location-based messaging application. A user can send ...

  13. Provable and practical location privacy for vehicular and mobile systems

    E-Print Network [OSTI]

    Popa, Raluca Ada

    2010-01-01T23:59:59.000Z

    In recent years, there has been a rapid evolution of location-based vehicular and mobile services (e.g., electronic tolling, congestion pricing, traffic statistics, insurance pricing, location-based social applications), ...

  14. A unified Bayesian framework for relative microseismic location

    E-Print Network [OSTI]

    Poliannikov, Oleg V.

    We study the problem of determining an unknown microseismic event location relative to previously located events using a single monitoring array in a monitoring well. We show that using the available information about the ...

  15. A unified Bayesian framework for relative microseismic location

    E-Print Network [OSTI]

    Poliannikov, Oleg V.

    2013-01-01T23:59:59.000Z

    We study the problem of determining an unknown microseismic event location relative to previously located events using a single monitoring array in a monitoring well. We show that using the available information about the ...

  16. Holdout transshipment policy in two-location inventory systems

    E-Print Network [OSTI]

    Zhang, Jiaqi

    2009-01-01T23:59:59.000Z

    In two-location inventory systems, unidirectional transshipment policies are considered when an item is not routinely stocked at a location in the system. Unlike the past research in this area which has concentrated on ...

  17. Policy-aware sender anonymity in Location-based services

    E-Print Network [OSTI]

    Vyas, Avinash

    2011-01-01T23:59:59.000Z

    LBS Server Location Server CSP Sender Figure 1.1: LBS ModelService Provider, denoted as CSP, the Location Server,is either the MPC in the CSPs network or an Over-The-Top (

  18. Locating a semi-obnoxious facility with repelling polygonal regions

    E-Print Network [OSTI]

    2007-04-30T23:59:59.000Z

    Apr 30, 2007 ... Page 1 ... For the last years, the location of semi-desirable facilities has been a widely studied topic by the researchers in location theory (see [1...

  19. Toward Rapid Unattended X-ray Tomography of Large Planar Samples at 50-nm Resolution

    SciTech Connect (OSTI)

    Rudati, J.; Tkachuk, A.; Gelb, J.; Hsu, G.; Feng, Y.; Pastrick, R.; Lyon, A.; Trapp, D.; Beetz, T.; Chen, S.; Hornberger, B.; Seshadri, S.; Kamath, S.; Zeng, X.; Feser, M.; Yun, W. [Xradia, Inc., Concord, California (United States); Pianetta, P.; Andrews, J.; Brennan, S. [Stanford Synchrotron Radiation Lightsource, Stanford Linear Accelerator Center, Menlo Park, California (United States); Chu, Y. S. [Advanced Photon Source, Argonne National Laboratory, Argonne, Illinois (United States)] (and others)

    2009-04-19T23:59:59.000Z

    X-ray tomography at sub-50 nm resolution of small areas ({approx}15 {mu}mx15 {mu}m) are routinely performed with both laboratory and synchrotron sources. Optics and detectors for laboratory systems have been optimized to approach the theoretical efficiency limit. Limited by the availability of relatively low-brightness laboratory X-ray sources, exposure times for 3-D data sets at 50 nm resolution are still many hours up to a full day. However, for bright synchrotron sources, the use of these optimized imaging systems results in extremely short exposure times, approaching live-camera speeds at the Advanced Photon Source at Argonne National Laboratory near Chicago in the US These speeds make it possible to acquire a full tomographic dataset at 50 nm resolution in less than a minute of true X-ray exposure time. However, limits in the control and positioning system lead to large overhead that results in typical exposure times of {approx}15 min currently.We present our work on the reduction and elimination of system overhead and toward complete automation of the data acquisition process. The enhancements underway are primarily to boost the scanning rate, sample positioning speed, and illumination homogeneity to performance levels necessary for unattended tomography of large areas (many mm{sup 2} in size). We present first results on this ongoing project.

  20. Risks of using AP locations discovered through war driving

    E-Print Network [OSTI]

    Kotz, David

    Risks of using AP locations discovered through war driving Minkyong Kim, Jeffrey J. Fielding the actual locations are often unavailable, they use estimated locations from war driving estimated through war driving. War driving is the process of collecting Wi-Fi beacons by driving or walking

  1. Accurate Eye Center Location through Invariant Isocentric Patterns

    E-Print Network [OSTI]

    Gevers, Theo

    1 Accurate Eye Center Location through Invariant Isocentric Patterns Roberto Valenti, Student Member, IEEE, and Theo Gevers, Member, IEEE, Abstract--Locating the center of the eyes allows for valuable information to be captured and used in a wide range of applications. Accurate eye center location

  2. Controlling Across Complex Networks: Emerging links between networks and control

    E-Print Network [OSTI]

    Mexico, Albuquerque, NM 87131-0001, USA. tanner@unm.edu 3 Electrical & Computer Engineering Department, MSC01 1100, 1 University of New Mexico, Albuquerque, NM 87131-0001, USA. chaouki@ece.unm.edu 4 Data's arsenal to make them available to control engineers, and describe how ideas developed for complex net

  3. Control of Microwave-Propelled Sails Using Delayed Measurements

    E-Print Network [OSTI]

    are with the Department of Electrical and Computer Engineering, University of New Mexico, Albuquerque, NM 87131 - contact sidewise motions if the beam moves off center, since a net sideways force restores the sail to its position author edl@eece.unm.edu Department of Mechanical Engineering, University of New Mexico, Albuquerque, NM

  4. Pursue robust indefinite scalability David H. Ackley

    E-Print Network [OSTI]

    Maccabe, Barney

    of New Mexico Albuquerque, NM 87131 Daniel C. Cannon Dept. of Computer Science The University of New Mexico Albuquerque, NM 87131 Abstract For research insights and development poten- tial, we should interconnects, at least above some granularity--and also implying asynchronous or dynamically

  5. A Hybrid Framework for Resource Allocation among Multiple Agents Moving on Discrete

    E-Print Network [OSTI]

    Tanner, Herbert G.

    continuous dynamics yields an interconnected system that is stable on each possible configuration of agents and Computer Engineering, The University of New Mexico, Albuquerque NM 87131 {jlpiovesan Engineering, The University of New Mexico, Albuquerque NM 87131 tanner@unm.edu, phone: 1-505-277-1493. Jorge

  6. Statistical-Learning Control of Multiple-Delay Systems with Applications to ATM Networks

    E-Print Network [OSTI]

    Author: C. T. Abdallah is with the Department of EECE, Univer- sity of New Mexico, Albuquerque, NM 87131 is with the Department of Mathematics & Statistics, University of New Mexico, Albuquerque, NM 87131, USA. E-mail: vlad are uncertain, one is faced with the challenging problem of trying to control a large, interconnected network

  7. An analog characterization of the subrecursive functions

    E-Print Network [OSTI]

    Lisboa, Universidade Tcnica de

    , Santa Fe, New Mexico 87501 moore@santafe.edu 3 Computer Science Department, University of New Mexico, Albuquerque NM 87131 4 Physics Department, University of New Mexico, Albuquerque NM 87131 5 D or more output shafts. The main units were interconnected gear boxes and mechanical friction wheel

  8. A Hybrid Framework for Resource Allocation among Multiple Agents Moving on Discrete

    E-Print Network [OSTI]

    continuous dynamics yield an interconnected system that is stable on each possible configuration of agents of Electrical and Computer Engineering, The University of New Mexico, Albuquerque NM 87131 {jlpiovesan Engineering, The University of New Mexico, Albuquerque NM 87131 tanner@unm.edu, phone: 1-505-2771493. Jorge

  9. Statistical-Learning Control of Multiple-Delay Systems with Applications to ATM Networks

    E-Print Network [OSTI]

    : C. T. Abdallah is with the Department of EECE, Univer- sity of New Mexico, Albuquerque, NM 87131 is with the Department of Mathematics & Statistics, University of New Mexico, Albuquerque, NM 87131, USA. E-mail: vlad are uncertain, one is faced with the challenging problem of trying to control a large, interconnected network

  10. SUBMITTED FOR PUBLICATION TO: IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, JULY 5, 2004 1 Wireless Communication with Smart Photonic

    E-Print Network [OSTI]

    Tanner, Herbert G.

    photonics to gradually replace conven- tional RF components, such as the coax interconnecting the antenna are with the De- partment of Electrical and Computer Engineering of the University of New Mexico, Albuquerque, NM of the University of New Mexico, MSC01 1150, Albuquerque, NM 87131, tanner@me.unm.edu. Tsai Liao

  11. An MPI Tool to Measure Application Sensitivity to Variation in Communication Parameters

    E-Print Network [OSTI]

    Maccabe, Barney

    Mexico, Albuquerque, NM 87131-1386, leon,maccabe @cs.unm.edu 2 Scalable Computing Systems, Sandia National Laboratories, Albuquerque, NM 87185-1110, bright@cs.sandia.gov Abstract. This work describes by Myricom as a communication layer for its Myrinet network. GM is comprised of a kernel driver, a user

  12. Proceedingsof the 39*IEEE Conferenceon Decision and Control

    E-Print Network [OSTI]

    and adjust their transmission rates in order to match their share of the network resources. ATM networks. Byrne EECE Department Dipartimento di Informatica e Sistemistica Sandia National Laboratories The University of New Mexico Albuquerque, NM 87131 USA Napoli, ITALY Albuquerque, NM 87185-1003 USA Universit

  13. Hybrid Network on Chip (HNoC): Local Buses with a Global Mesh Architecture

    E-Print Network [OSTI]

    Forrest, Stephanie

    and Subject Descriptors B.7.2 [Integrated Circuits]: Design aids simulation; C.4 [Performance of Systems-Ha University of New Mexico Department of ECE Albuquerque, NM, USA +1 (505) 277-6724 payman@ece.unm.edu George B. P. Bezerra University of New Mexico Department of CS Albuquerque, NM, USA +1 (505) 277-3411 gbezerra

  14. Modeling NoC Traffic Locality and Energy Consumption with Rent's Communication Probability Distribution

    E-Print Network [OSTI]

    Forrest, Stephanie

    Circuits]: Design aids--simulation; C.4 [Performance of Systems]: Modeling techiniques General Terms Design Distribution George B. P. Bezerra Dept. of Computer Science University of New Mexico Albuquerque, NM 87131 gbezerra@cs.unm.edu Stephanie Forrest Dept. of Computer Science University of New Mexico Albuquerque, NM

  15. University of New Mexico Chapter University of New Mexico

    E-Print Network [OSTI]

    Krishna, Sanjay

    Sigma Xi University of New Mexico Chapter University of New Mexico Albuquerque, NM 87131 May 13, 2011 Mr. Ajit Barve University of New Mexico Albuquerque, NM 87131-0001 Dear Mr. Barve, On behalf to attend monthly scientific presentations at the University of New Mexico, and participation in the annual

  16. 785 nm Raman Spectroscopy of CVD Diamond Films Paul William May, James A Smith, and Keith N Rosser

    E-Print Network [OSTI]

    Bristol, University of

    . Here, we report that when using 785 nm excitation, the Raman spectra from thin polycrystalline diamond785 nm Raman Spectroscopy of CVD Diamond Films Paul William May, James A Smith, and Keith N Rosser Raman spectroscopy is a powerful technique often used to study CVD diamond films, however, very little

  17. 785 nm Raman spectroscopy of CVD diamond films P.W. May , J.A. Smith, K.N. Rosser

    E-Print Network [OSTI]

    Bristol, University of

    using 785 nm excitation with 1 m spot size, the Raman spectra from thin polycrystalline diamond films785 nm Raman spectroscopy of CVD diamond films P.W. May , J.A. Smith, K.N. Rosser School is a powerful technique often used to study CVD diamond films, however, very little work has been reported

  18. Highly efficient Nd:YVO4 laser by direct in-band diode pumping at 914 nm

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Highly efficient Nd:YVO4 laser by direct in-band diode pumping at 914 nm Damien Sangla,1,2 Marc (Doc. ID 109884); published July 9, 2009 A Nd:YVO4 crystal was pumped directly into the emitting level nm for an absorbed pump power of 14.6 W, corresponding to an optical efficiency of 78.7%. We

  19. Damage threshold of inorganic solids under free-electron-laser irradiation at 32.5 nm wavelength

    E-Print Network [OSTI]

    von der Linde, D.

    to the optical components required to utilize XFEL beams, including radiation damage. Theoretical workDamage threshold of inorganic solids under free-electron-laser irradiation at 32.5 nm wavelength SC were exposed to single 25 fs long pulses of 32.5 nm free-electron-laser radiation at fluences of up

  20. Radiation damage in the LHCb Vertex Locator

    E-Print Network [OSTI]

    A. Affolder; K. Akiba; M. Alexander; S. Ali; M. Artuso; J. Benton; M. van Beuzekom; P. M. Bj\\ornstad; G. Bogdanova; S. Borghi; T. J. V. Bowcock; H. Brown; J. Buytaert; G. Casse; P. Collins; S. De Capua; D. Dossett; L. Eklund; C. Farinelli; J. Garofoli; M. Gersabeck; T. Gershon; H. Gordon; J. Harrison; V. Heijne; K. Hennessy; D. Hutchcroft; E. Jans; M. John; T. Ketel; G. Lafferty; T. Latham; A. Leflat; M. Liles; D. Moran; I. Mous; A. Oblakowska-Mucha; C. Parkes; G. D. Patel; S. Redford; M. M. Reid; K. Rinnert; E. Rodrigues; M. Schiller; T. Szumlak; C. Thomas; J. Velthuis; V. Volkov; A. D. Webber; M. Whitehead; E. Zverev

    2013-02-21T23:59:59.000Z

    The LHCb Vertex Locator (VELO) is a silicon strip detector designed to reconstruct charged particle trajectories and vertices produced at the LHCb interaction region. During the first two years of data collection, the 84 VELO sensors have been exposed to a range of fluences up to a maximum value of approximately $\\rm{45 \\times 10^{12}\\,1\\,MeV}$ neutron equivalent ($\\rm{1\\,MeV\\,n_{eq}}$). At the operational sensor temperature of approximately $-7\\,^{\\circ}\\rm{C}$, the average rate of sensor current increase is $18\\,\\upmu\\rm{A}$ per $\\rm{fb^{-1}}$, in excellent agreement with predictions. The silicon effective bandgap has been determined using current versus temperature scan data after irradiation, with an average value of $E_{g}=1.16\\pm0.03\\pm0.04\\,\\rm{eV}$ obtained. The first observation of n-on-n sensor type inversion at the LHC has been made, occurring at a fluence of around $15 \\times 10 ^{12}$ of $1\\,\\rm{MeV\\,n_{eq}}$. The only n-on-p sensors in use at the LHC have also been studied. With an initial fluence of approximately $\\rm{3 \\times 10^{12}\\,1\\,MeV\\,n_{eq}}$, a decrease in the Effective Depletion Voltage (EDV) of around 25\\,V is observed, attributed to oxygen induced removal of boron interstitial sites. Following this initial decrease, the EDV increases at a comparable rate to the type inverted n-on-n type sensors, with rates of $(1.43\\pm 0.16) \\times 10 ^{-12}\\,\\rm{V} / \\, 1 \\, \\rm{MeV\\,n_{eq}}$ and $(1.35\\pm 0.25) \\times 10 ^{-12}\\,\\rm{V} / \\, 1 \\, \\rm{MeV\\,n_{eq}}$ measured for n-on-p and n-on-n type sensors, respectively. A reduction in the charge collection efficiency due to an unexpected effect involving the second metal layer readout lines is observed.

  1. 1-nm-thick graphene tri-layer as the ultimate copper diffusion barrier

    SciTech Connect (OSTI)

    Nguyen, Ba-Son [Department of Mechanical Engineering, National Cheng Kung University, 1 University Road, Tainan 701, Taiwan (China); Lin, Jen-Fin [Department of Mechanical Engineering, National Cheng Kung University, 1 University Road, Tainan 701, Taiwan (China); Center for Micro/Nano Science and Technology, National Cheng Kung University, 1 University Road, Tainan 701, Taiwan (China); Perng, Dung-Ching, E-mail: dcperng@ee.ncku.edu.tw [Institute of Microelectronics and Electrical Engineering Department, National Cheng Kung University, 1 University Road, Tainan 701, Taiwan (China); Center for Micro/Nano Science and Technology, National Cheng Kung University, 1 University Road, Tainan 701, Taiwan (China)

    2014-02-24T23:59:59.000Z

    We demonstrate the thinnest ever reported Cu diffusion barrier, a 1-nm-thick graphene tri-layer. X-ray diffraction patterns and Raman spectra show that the graphene is thermally stable at up to 750?C against Cu diffusion. Transmission electron microscopy images show that there was no inter-diffusion in the Cu/graphene/Si structure. Raman analyses indicate that the graphene may have degraded into a nanocrystalline structure at 750?C. At 800?C, the perfect carbon structure was damaged, and thus the barrier failed. The results of this study suggest that graphene could be the ultimate Cu interconnect diffusion barrier.

  2. Corrosion-resistant multilayer coatings for the 28-75 nm wavelength region

    SciTech Connect (OSTI)

    Soufli, R; Fernandez-Perea, M; Al, E T

    2011-11-08T23:59:59.000Z

    Corrosion has prevented use of SiC/Mg multilayers in applications requiring good lifetime stability. We have developed Al-based barrier layers that dramatically reduce corrosion, while preserving high reflectance and low stress. The aforementioned advances may enable the implementation of corrosion-resistant, high-performance SiC/Mg coatings in the 28-75 nm region in applications such as tabletop EUV/soft x-ray laser sources and solar physics telescopes. Further study and optimization of corrosion barrier structures and coating designs is underway.

  3. Quantitative analysis of reptation of partially extended DNA in sub-30 nm nanoslits

    E-Print Network [OSTI]

    Yeh, Jia-Wei; Taloni, Alessandro; Chen, Yeng-Long; Chou, Chia-Fu

    2015-01-01T23:59:59.000Z

    We observed reptation of single DNA molecules in fused silica nanoslits of sub-30 nm height. The reptation behavior and the effect of confinement are quantitatively characterized using orientation correlation and transverse fluctuation analysis. We show tube-like polymer motion arises for a tense polymer under strong quasi-2D confinement and interaction with surface- passivating polyvinylpyrrolidone (PVP) molecules in nanoslits, while etching- induced device surface roughness, chip bonding materials and DNA-intercalated dye-surface interaction, play minor roles. These findings have strong implications for the effect of surface modification in nanofluidic systems with potential applications for single molecule DNA analysis.

  4. Light trapping in a 30-nm organic photovoltaic cell for efficient carrier collection and light absorption

    E-Print Network [OSTI]

    Tsai, Cheng-Chia; Banerjee, Ashish; Osgood, Richard M; Englund, Dirk

    2012-01-01T23:59:59.000Z

    We describe surface patterning strategies that permit high photon-collection efficiency together with high carrier-collection efficiency in an ultra-thin planar heterojunction organic photovoltaic cell. Optimized designs reach up to 50% photon collection efficiency in a P3HT layer of only 30 nm, representing a 3- to 5-fold improvement over an unpatterned cell of the same thickness. We compare the enhancement of light confinement in the active layer with an ITO top layer for TE and TM polarized light, and demonstrate that the light absorption can increase by a factor of 2 due to a gap-plasmon mode in the active layer.

  5. Bulk and surface laser damage of silica by picosecond and nanosecond pulses at 1064 nm

    SciTech Connect (OSTI)

    Smith, Arlee V.; Do, Binh T

    2008-09-10T23:59:59.000Z

    We measured bulk and surface dielectric breakdown thresholds of pure silica for 14 ps and 8 ns pulses of 1064 nm light. The thresholds are sharp and reproducible. For the 8 ns pulses the bulk threshold irradiance is 4.75 {+-} 0.25 kW/{mu}m{sup 2}. The threshold is approximately three times higher for 14 ps pulses. For 8 ns pulses the input surface damage threshold can be made equal to the bulk threshold by applying an alumina or silica surface polish.

  6. NM Stat. 62-9 - The Utility Franchise | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer PlantMunhall, Pennsylvania: Energy Resources JumpNEF Advisors LLC JumpNF- Review ofNM Stat.

  7. File:USDA-CE-Production-GIFmaps-NM.pdf | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump to:ar-80m.pdf Jump to:Originalfaq.pdfFinal.pdfNM.pdf Jump to: navigation,

  8. Sensitivity of forced air distribution system efficiency to climate, duct location, air leakage and insulation

    E-Print Network [OSTI]

    Walker, Iain

    2001-01-01T23:59:59.000Z

    Location, Air Leakage and Insulation Iain S. Walker Energy4 Duct Insulation, Location and Leakageinsulation

  9. Two-photon laser excitation of trapped 232Th+ ions via the 402 nm resonance line

    E-Print Network [OSTI]

    Herrera-Sancho, O A; Zimmermann, K; Tamm, Chr; Peik, E; Taichenachev, A V; Yudin, V I; Glowacki, P

    2012-01-01T23:59:59.000Z

    Experiments on one- and two-photon laser excitation of 232Th+ ions in a radiofrequency ion trap are reported. As the first excitation step, the strongest resonance line at 402 nm from the 6d^2 7s J=3/2 ground state to the 6d7s7p J=5/2 state at 24874 cm^{-1} is driven by radiation from an extended cavity diode laser. Spontaneous decay of the intermediate state populates a number of low-lying metastable states, thus limiting the excited state population and fluorescence signal obtainable with continuous laser excitation. We study the collisional quenching efficiency of helium, argon, and nitrogen buffer gases, and the effect of repumping laser excitation from the three lowest-lying metastable levels. The experimental results are compared with a four-level rate equation model, that allows us to deduce quenching rates for these buffer gases. Using laser radiation at 399 nm for the second step, we demonstrate two-photon excitation to the state at 49960 cm^{-1}, among the highest-lying classified levels of Th+. Thi...

  10. Study on the oxidation and reduction of tungsten surface for sub-50 nm patterning process

    SciTech Connect (OSTI)

    Kim, Jong Kyu; Nam, Seok Woo; Cho, Sung Il; Jhon, Myung S.; Min, Kyung Suk; Kim, Chan Kyu; Jung, Ho Bum; Yeom, Geun Young [Memory Division Semiconductor Business, Samsung Electronics, San No. 16 Banwol-Ri, Taean-Eup, Hwasung-City, Gyeonggi-Do 449-711, South Korea and Department of Advanced Materials Science and Engineering, Sungkyunkwan University, Suwon, Gyeonggi-do 440-746 (Korea, Republic of); Memory Division Semiconductor Business, Samsung Electronics, San No. 16 Banwol-Ri, Taean-Eup, Hwasung-City, Gyeonggi-Do 449-711 (Korea, Republic of); Department of Chemical Engineering and Data Storage Systems Center, Carnegie Mellon University, Pittsburgh, Pennsylvania 15213 (United States); Department of Advanced Materials Science and Engineering, Sungkyunkwan University, Suwon, Gyeonggi-do 440-746 (Korea, Republic of)

    2012-11-15T23:59:59.000Z

    The oxidation characteristics of tungsten line pattern during the carbon-based mask-layer removal process using oxygen plasmas have been investigated for sub-50 nm patterning processes, in addition to the reduction characteristics of the WO{sub x} layer formed on the tungsten line surface using hydrogen plasmas. The surface oxidation of tungsten lines during the mask layer removal process could be minimized by using low-temperature (300 K) plasma processing for the removal of the carbon-based material. Using this technique, the thickness of WO{sub x} on the tungsten line could be decreased to 25% compared to results from high-temperature processing. The WO{sub x} layer could also be completely removed at a low temperature of 300 K using a hydrogen plasma by supplying bias power to the tungsten substrate to provide a activation energy for the reduction. When this oxidation and reduction technique was applied to actual 40-nm-CD device processing, the complete removal of WO{sub x} formed on the sidewall of tungsten line could be observed.

  11. Nonlinear bleaching, absorption, and scattering of 532-nm-irradiated plasmonic nanoparticles

    SciTech Connect (OSTI)

    Liberman, V.; Sworin, M.; Kingsborough, R. P.; Geurtsen, G. P.; Rothschild, M. [Lincoln Laboratory, Massachusetts Institute of Technology, 244 Wood Street, Lexington, Massachusetts 02420 (United States)

    2013-02-07T23:59:59.000Z

    Single-pulse irradiation of Au and Ag suspensions of nanospheres and nanodisks with 532-nm 4-ns pulses has identified complex optical nonlinearities while minimizing material damage. For all materials tested, we observe competition between saturable absorption (SA) and reverse SA (RSA), with RSA behavior dominating for intensities above {approx}50 MW/cm{sup 2}. Due to reduced laser damage in single-pulse experiments, the observed intrinsic nonlinear absorption coefficients are the highest reported to date for Au nanoparticles. We find size dependence to the nonlinear absorption enhancement for Au nanoparticles, peaking in magnitude for 80-nm nanospheres and falling off at larger sizes. The nonlinear absorption coefficients for Au and Ag spheres are comparable in magnitude. On the other hand, the nonlinear absorption for Ag disks, when corrected for volume fraction, is several times higher. These trends in nonlinear absorption are correlated to local electric field enhancement through quasi-static mean-field theory. Through variable size aperture measurements, we also separate nonlinear scattering from nonlinear absorption. For all materials tested, we find that nonlinear scattering is highly directional and that its magnitude is comparable to that of nonlinear absorption. These results indicate methods to improve the efficacy of plasmonic nanoparticles as optical limiters in pulsed laser systems.

  12. Continuous wavelet transform analysis and modal location analysis acoustic emission source location for nuclear piping crack growth monitoring

    SciTech Connect (OSTI)

    Mohd, Shukri [Nondestructive Testing Group, Industrial Technology Division, Malaysian Nuclear Agency, 43000, Bangi, Selangor (Malaysia); Holford, Karen M.; Pullin, Rhys [Cardiff School of Engineering, Cardiff University, Queen's Buildings, The Parade, CARDIFF CF24 3AA (United Kingdom)

    2014-02-12T23:59:59.000Z

    Source location is an important feature of acoustic emission (AE) damage monitoring in nuclear piping. The ability to accurately locate sources can assist in source characterisation and early warning of failure. This paper describe the development of a novelAE source location technique termed 'Wavelet Transform analysis and Modal Location (WTML)' based on Lamb wave theory and time-frequency analysis that can be used for global monitoring of plate like steel structures. Source location was performed on a steel pipe of 1500 mm long and 220 mm outer diameter with nominal thickness of 5 mm under a planar location test setup using H-N sources. The accuracy of the new technique was compared with other AE source location methods such as the time of arrival (TOA) techniqueand DeltaTlocation. Theresults of the study show that the WTML method produces more accurate location resultscompared with TOA and triple point filtering location methods. The accuracy of the WTML approach is comparable with the deltaT location method but requires no initial acoustic calibration of the structure.

  13. Automated detection and location of indications in eddy current signals

    DOE Patents [OSTI]

    Brudnoy, David M. (Albany, NY); Oppenlander, Jane E. (Burnt Hills, NY); Levy, Arthur J. (Schenectady, NY)

    2000-01-01T23:59:59.000Z

    A computer implemented information extraction process that locates and identifies eddy current signal features in digital point-ordered signals, signals representing data from inspection of test materials, by enhancing the signal features relative to signal noise, detecting features of the signals, verifying the location of the signal features that can be known in advance, and outputting information about the identity and location of all detected signal features.

  14. Locations of Smart Grid Demonstration and Large-Scale Energy...

    Broader source: Energy.gov (indexed) [DOE]

    the location of all projects created with funding from the Smart Grid Demonstration and Energy Storage Project, funded through the American Recovery and Reinvestment Act....

  15. Optimization Online - An MILP approach to Multi-location, Multi ...

    E-Print Network [OSTI]

    Christina N Burt

    2014-11-30T23:59:59.000Z

    Nov 30, 2014 ... An MILP approach to Multi-location, Multi-Period Equipment Selection for Surface Mining with Case Studies. Christina N Burt(cnburt ***at***...

  16. Located in historic Los Alamos, New Mexico against the backdrop...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Located in historic Los Alamos, New Mexico against the backdrop of the lush Jemez Mountains, Los Alamos National Laboratory (LANL) offers its education program participants...

  17. NMOCD - Form G-102 - Geothermal Resources Well Location and Acreage...

    Open Energy Info (EERE)

    Well Location and Acreage Dedication Plat Author State of New Mexico Energy and Minerals Department Published New Mexico Oil Conservation Division, 1978 DOI Not Provided...

  18. Attack-Resistant Location Estimation in Sensor (Revised August 2005)

    E-Print Network [OSTI]

    Ning, Peng

    role in many sensor network applications. Not only do applications such as environment monitoring and target tracking require sensors' location information to fulfill their tasks, but several fundamental

  19. acoustic location system: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ON POWER SYSTEMS, VOL. 29, NO. 1, JANUARY 2014 203 Distribution Locational Marginal Pricing for Optimal Power Transmission, Distribution and Plants Websites Summary:...

  20. anatomic subsite location: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    services (e.g., electronic tolling, congestion pricing, traffic statistics, insurance pricing, location-based social applications), ... Popa, Raluca Ada 2010-01-01 First Page...

  1. agency dtra location: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    flows or spillovers between multinational enterprises (MNEs the diversity of locational environments. The localization of knowledge sources depends on MNE group of...

  2. Research Site Locations for Current and Former EERE Postdoctoral...

    Broader source: Energy.gov (indexed) [DOE]

    Research Site Locations for Current and Former EERE Postdoctoral Awards, from the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy. eeremap2015.pdf...

  3. The Value of Flexibility in Robust Location-Transportation Problem

    E-Print Network [OSTI]

    Amir Ardestani-Jaafari

    2014-11-25T23:59:59.000Z

    Nov 25, 2014 ... Abstract: Facility location decisions play a critical role in transportation planning. In fact, it has recently become essential to study how such...

  4. Title 33 CFR 115 Bridge Locations and Clearances: Administrative...

    Open Energy Info (EERE)

    OpenEI Reference LibraryAdd to library Legal Document- Federal RegulationFederal Regulation: Title 33 CFR 115 Bridge Locations and Clearances: Administrative ProceduresLegal...

  5. Identification of High Collision Concentration Locations Under Wet Weather Conditions

    E-Print Network [OSTI]

    Hwang, Taesung; Chung, Koohong; Ragland, David; Chan, Chin-Yao

    2008-01-01T23:59:59.000Z

    conducted under wet weather conditions. Observations fromLeahy, M. , and Suggett, J. Weather as a Chronic Hazard forLocations Under Wet Weather Conditions Taesung Hwang,

  6. p-facility Huff location problem on networks ?

    E-Print Network [OSTI]

    2014-10-30T23:59:59.000Z

    ing field, in problems such as location of petrol stations, shopping centers or restaurants. [14, 20, 22]. Network optimization models [5] are widely used in practice...

  7. Colorado CRS 29-20-108, Location, Construction, or Improvement...

    Open Energy Info (EERE)

    Location, Construction, or Improvement of Major Electrical or Natural Gas Facilities Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document-...

  8. Condensing Heating and Water Heating Equipment Workshop Location...

    Energy Savers [EERE]

    Condensing Heating and Water Heating Equipment Workshop Location: Washington Gas Light Appliance Training Facility 6801 Industrial Road Springfield, VA Date: October 9, 2014 Time:...

  9. High-order harmonic generation in atomic hydrogen at 248 nm: Dipole-moment versus acceleration spectrum

    E-Print Network [OSTI]

    Jiang, Tsin-Fu; Chu, Shih-I

    1992-12-01T23:59:59.000Z

    We present a study of the high-order harmonic-generation (HG) spectra of atomic hydrogen at 248 nm based on the Fourier transform of the expectation values of the induced dipole moment and acceleration. The calculations ...

  10. 34 OPTICS LETTERS / Vol. 22, No. 1 / January 1, 1997 Intense plasma discharge source at 13.5 nm for

    E-Print Network [OSTI]

    Rocca, Jorge J.

    and Education in Optics and Lasers, University of Central Florida, Orlando, Florida 32816-2700 J. J. Rocca The f lux emitted at 13.5 nm by a lithium plasma within the bandwidth of multilayer op- tics

  11. Nanosecond-laser-induced damage in potassium titanyl phosphate: pure 532 nm pumping and frequency conversion situations

    SciTech Connect (OSTI)

    Wagner, Frank R.; Hildenbrand, Anne; Natoli, Jean-Yves; Commandre, Mireille

    2011-08-01T23:59:59.000Z

    Nanosecond-laser-induced damage measurements in the bulk of KTiOPO{sub 4} (KTP) crystals are reported using incident 532 nm light or using incident 1064 nm light, which pumps more or less efficient second harmonic generation. No damage threshold fatigue effect is observed with pure 532 nm irradiation. The damage threshold of Z-polarized light is higher than the one for X- or Y-polarized light. During frequency doubling, the damage threshold was found to be lower than for pure 1064 or 532 nm irradiation. More data to quantify the cooperative damage mechanism were generated by performing fluence ramp experiments with varying conditions and monitoring the conversion efficiency. All damage thresholds plotted against the conversion efficiency align close to a characteristic curve.

  12. Ytterbium-doped fibre laser tunable in the range 1017 - 1040 nm with second-harmonic generation

    SciTech Connect (OSTI)

    Dontsova, E I; Kablukov, S I; Babin, Sergei A

    2013-05-31T23:59:59.000Z

    A cladding-pumped ytterbium-doped fibre laser has been tuned to shorter emission wavelengths (from 1040 to 1017 nm). The laser output power obtained has been compared to calculation results. We have studied frequency doubling of the laser in a KTiOPO{sub 4} (KTP) crystal with type II phase matching in the XY plane and demonstrated wavelength tuning in the range 510 - 520 nm. (lasers)

  13. Frequency doubling and sum-frequency mixing operation at 469.2, 471, and 473 nm in Nd:YAG

    E-Print Network [OSTI]

    Boyer, Edmond

    at around 445, 469, or 479 nm are required to pump these Pr3-doped laser hosts [813]. Gal- lium nitride (GaN decades for different applications [14] such as la- ser remote sensing (differential absorption LIDAR to an absorption band of Pr3 [14]. For that purpose the laser has to work on the 938.5 nm transition line of Nd

  14. Efficient 13.5 nm extreme ultraviolet emission from Sn plasma irradiated by a long CO2 laser pulse

    E-Print Network [OSTI]

    Najmabadi, Farrokh

    Efficient 13.5 nm extreme ultraviolet emission from Sn plasma irradiated by a long CO2 laser pulse-band 2% bandwidth conversion efficiency CE from a CO2 laser to 13.5 nm extreme ultraviolet EUV light was investigated for Sn plasma. It was found that high in-band CE, 2.6%, is consistently obtained using a CO2 laser

  15. Structural distortions in 5-10 nm silver nanoparticles under high pressure

    SciTech Connect (OSTI)

    Koski, Kristie J.; Kamp, Noelle M.; Kunz, Martin; Knight, Jason K.; Alivisatos, A.P.; Smith, R.K.

    2008-10-13T23:59:59.000Z

    We present experimental evidence that silver nanoparticles in the size range of 5-10 nm undergo a reversible structural transformation under hydrostatic pressures up to 10 GPa. We have used x-ray diffraction with a synchrotron light source to investigate pressure-dependent and size-dependent trends in the crystal structure of silver nanoparticles in a hydrostatic medium compressed in a diamond-anvil cell. Results suggest a reversible linear pressure-dependent rhombohedral distortion which has not been previously observed in bulk silver. We propose a mechanism for this transition that considers the bond-length distribution in idealized multiply twinned icosahedral particles. To further support this hypothesis, we also show that similar measurements of single-crystal platinum nanoparticles reveal no such distortions.

  16. Dense wavelength multiplexing of 1550 nm QKD with strong classical channels in reconfigurable networking environments

    SciTech Connect (OSTI)

    Rosenberg, Danna [Los Alamos National Laboratory; Peterson, Charles G [Los Alamos National Laboratory; Dallmann, Nicholas [Los Alamos National Laboratory; Hughes, Richard J [Los Alamos National Laboratory; Mccabe, Kevin P [Los Alamos National Laboratory; Nordholt, Jane E [Los Alamos National Laboratory; Tyagi, Hush T [Los Alamos National Laboratory; Peters, Nicholas A [TELCORDIA TECHNOLOGIES; Toliver, Paul [TELCORDIA TECHNOLOGIES; Chapman, Thomas E [TELCORDIA TECHNOLOGIES; Runser, Robert J [TELCORDIA TECHNOLOGIES; Mcnown, Scott R [TELCORDIA TECHNOLOGIES

    2008-01-01T23:59:59.000Z

    To move beyond dedicated links and networks, quantum communications signals must be integrated into networks carrying classical optical channels at power levels many orders of magnitude higher than the quantum signals themselves. We demonstrate transmission of a 1550-nm quantum channel with up to two simultaneous 200-GHz spaced classical telecom channels, using ROADM (reconfigurable optical <1dd drop multiplexer) technology for multiplexing and routing quantum and classical signals. The quantum channel is used to perform quantum key distribution (QKD) in the presence of noise generated as a by-product of the co-propagation of classical channels. We demonstrate that the dominant noise mechanism can arise from either four-wave mixing or spontaneous Raman scattering, depending on the optical path characteristics as well <1S the classical channel parameters. We quantity these impairments and discuss mitigation strategies.

  17. Optical-fiber source of polarization-entangled photon pairs in the 1550nm telecom band

    E-Print Network [OSTI]

    Xiaoying Li; Paul L. Voss; Jay E. Sharping; Prem Kumar

    2004-08-12T23:59:59.000Z

    We present a fiber based source of polarization-entangled photon pairs that is well suited for quantum communication applications in the 1550nm band of standard fiber-optic telecommunications. Polarization entanglement is created by pumping a nonlinear-fiber Sagnac interferometer with two time-delayed orthogonally-polarized pump pulses and subsequently removing the time distinguishability by passing the parametrically scattered signal-idler photon pairs through a piece of birefringent fiber. Coincidence detection of the signal-idler photons yields biphoton interference with visibility greater than 90%, while no interference is observed in direct detection of either the signal or the idler photons. All four Bell states can be prepared with our setup and we demonstrate violations of CHSH form of Bell's inequalities by up to 10 standard deviations of measurement uncertainty.

  18. Pedestrian and traffic safety in parking lots at SNL/NM : audit background report.

    SciTech Connect (OSTI)

    Sanchez, Paul Ernest

    2009-03-01T23:59:59.000Z

    This report supplements audit 2008-E-0009, conducted by the ES&H, Quality, Safeguards & Security Audits Department, 12870, during fall and winter of FY 2008. The study evaluates slips, trips and falls, the leading cause of reportable injuries at Sandia. In 2007, almost half of over 100 of such incidents occurred in parking lots. During the course of the audit, over 5000 observations were collected in 10 parking lots across SNL/NM. Based on benchmarks and trends of pedestrian behavior, the report proposes pedestrian-friendly features and attributes to improve pedestrian safety in parking lots. Less safe pedestrian behavior is associated with older parking lots lacking pedestrian-friendly features and attributes, like those for buildings 823, 887 and 811. Conversely, safer pedestrian behavior is associated with newer parking lots that have designated walkways, intra-lot walkways and sidewalks. Observations also revealed that motorists are in widespread noncompliance with parking lot speed limits and stop signs and markers.

  19. Final report on LDRD project : single-photon-sensitive imaging detector arrays at 1600 nm.

    SciTech Connect (OSTI)

    Childs, Kenton David; Serkland, Darwin Keith; Geib, Kent Martin; Hawkins, Samuel D.; Carroll, Malcolm S.; Klem, John Frederick; Sheng, Josephine Juin-Jye; Patel, Rupal K.; Bolles, Desta; Bauer, Tom M.; Koudelka, Robert

    2006-11-01T23:59:59.000Z

    The key need that this project has addressed is a short-wave infrared light detector for ranging (LIDAR) imaging at temperatures greater than 100K, as desired by nonproliferation and work for other customers. Several novel device structures to improve avalanche photodiodes (APDs) were fabricated to achieve the desired APD performance. A primary challenge to achieving high sensitivity APDs at 1550 nm is that the small band-gap materials (e.g., InGaAs or Ge) necessary to detect low-energy photons exhibit higher dark counts and higher multiplication noise compared to materials like silicon. To overcome these historical problems APDs were designed and fabricated using separate absorption and multiplication (SAM) regions. The absorption regions used (InGaAs or Ge) to leverage these materials 1550 nm sensitivity. Geiger mode detection was chosen to circumvent gain noise issues in the III-V and Ge multiplication regions, while a novel Ge/Si device was built to examine the utility of transferring photoelectrons in a silicon multiplication region. Silicon is known to have very good analog and GM multiplication properties. The proposed devices represented a high-risk for high-reward approach. Therefore one primary goal of this work was to experimentally resolve uncertainty about the novel APD structures. This work specifically examined three different designs. An InGaAs/InAlAs Geiger mode (GM) structure was proposed for the superior multiplication properties of the InAlAs. The hypothesis to be tested in this structure was whether InAlAs really presented an advantage in GM. A Ge/Si SAM was proposed representing the best possible multiplication material (i.e., silicon), however, significant uncertainty existed about both the Ge material quality and the ability to transfer photoelectrons across the Ge/Si interface. Finally a third pure germanium GM structure was proposed because bulk germanium has been reported to have better dark count properties. However, significant uncertainty existed about the quantum efficiency at 1550 nm the necessary operating temperature. This project has resulted in several conclusions after fabrication and measurement of the proposed structures. We have successfully demonstrated the Ge/Si proof-of-concept in producing high analog gain in a silicon region while absorbing in a Ge region. This has included significant Ge processing infrastructure development at Sandia. However, sensitivity is limited at low temperatures due to high dark currents that we ascribe to tunneling. This leaves remaining uncertainty about whether this structure can achieve the desired performance with further development. GM detection in InGaAs/InAlAs, Ge/Si, Si and pure Ge devices fabricated at Sandia was shown to overcome gain noise challenges, which represents critical learning that will enable Sandia to respond to future single photon detection needs. However, challenges to the operation of these devices in GM remain. The InAlAs multiplication region was not found to be significantly superior to current InP regions for GM, however, improved multiplication region design of InGaAs/InP APDs has been highlighted. For Ge GM detectors it still remains unclear whether an optimal trade-off of parameters can achieve the necessary sensitivity at 1550 nm. To further examine these remaining questions, as well as other application spaces for these technologies, funding for an Intelligence Community post-doc was awarded this year.

  20. Oxygen in Galactic Disk Stars: non-LTE abundances from the 777 nm O I triplet

    E-Print Network [OSTI]

    I. Ramirez; C. Allende Prieto; D. L. Lambert

    2005-06-29T23:59:59.000Z

    Oxygen abundances for a large sample of dwarf and giant stars kinematically selected to be part of the Galactic thin and thick disks have been determined from a non-LTE analysis of the O I triplet lines at 777 nm. The abundance analysis was performed using the infrared flux method temperature scale, trigonometric surface gravities, and accurate atomic data. Within this framework, the ionization balance of iron lines could not be satisfied and so we adopted the iron abundances from Fe II lines only given that they are relatively less sensitive to changes in the atmospheric parameters. We show the resulting [O/Fe] vs. [Fe/H] relationship and briefly discuss its implications.

  1. Nanofiltration of Electrolyte Solutions by Sub-2nm Carbon Nanotube Membranes

    SciTech Connect (OSTI)

    Fornasiero, F; Park, H G; Holt, J K; Stadermann, M; Kim, S; In, J B; Grigoropoulos, C P; Noy, A; Bakajin, O

    2008-03-13T23:59:59.000Z

    Both MD simulations and experimental studies have shown that liquid and gas flow through carbon nanotubes with nanometer size diameter is exceptionally fast. For applications in separation technology, selectivity is required together with fast flow. In this work, we use pressure-driven filtration experiments to study ion exclusion in silicon nitride/sub-2-nm CNT composite membranes as a function of solution ionic strength, pH, and ion valence. We show that carbon nanotube membranes exhibit significant ion exclusion at low salt concentration. Our results support a rejection mechanism dominated by electrostatic interactions between fixed membrane charges and mobile ions, while steric and hydrodynamic effects appear to be less important. Comparison with commercial nanofiltration membranes for water softening reveals that our carbon nanotube membranes provides far superior water fluxes for similar ion rejection capabilities.

  2. Blind Channel Identification for the Emitter Location Problem

    E-Print Network [OSTI]

    Fowler, Mark

    a thesis entitled "Blind Channel Identification for the Emitter Location Problem: A Least Square ApproachBlind Channel Identification for the Emitter Location Problem: A Least Square Approach BY Cheung C. Chau B.S.E.E., Binghamton University, 2000 Thesis Submitted in Partial Fulfillment of the Requirements

  3. Derivation of Locational Marginal Prices for Restructured Wholesale Power Markets

    E-Print Network [OSTI]

    Tesfatsion, Leigh

    Derivation of Locational Marginal Prices for Restructured Wholesale Power Markets Haifeng Liu restructured wholesale power markets, the detailed derivation of LMPs as actually used in industry practice Operator (MISO). Keywords: Locational marginal pricing, wholesale power market, AC optimal power flow, DC

  4. Model-based Lifecycle Optimization of Well Locations

    E-Print Network [OSTI]

    Van den Hof, Paul

    Model-based Lifecycle Optimization of Well Locations and Production Settings in Petroleum Reservoirs #12;#12;MODEL-BASED LIFECYCLE OPTIMIZATION OF WELL LOCATIONS AND PRODUCTION SETTINGS IN PETROLEUM System Approach Petroleum Production" (ISAPP) programme. The knowledge center is a long-term co

  5. Benefits of Location-Based Access Control: A Literature Study

    E-Print Network [OSTI]

    Wieringa, Roel

    Benefits of Location-Based Access Control: A Literature Study Andre van Cleeff, Wolter Pieters.pieters, r.j.wieringa}@utwente.nl Abstract--Location-based access control (LBAC) has been suggested-based, physical and logical access control, (ii) improving the transparency of LBAC decision making, and (iii

  6. Quartz resonators thermal modelization using located constants networks

    E-Print Network [OSTI]

    Boyer, Edmond

    of quartz resonator. The designed model is tested by comparison of the experimental frequency versus235 Quartz resonators thermal modelization using located constants networks S. Galliou and J. P modelization of quartz resonators is first presented ; next, the method consisting on establishing a located

  7. Detecting and Locating Radioactive Signals with Wireless Sensor Networks

    E-Print Network [OSTI]

    Zhang, Tonglin

    Detecting and Locating Radioactive Signals with Wireless Sensor Networks Tonglin Zhang Department-765-4940558 AbstractMethods of detecting and locating nuclear radioac- tive targets via wireless sensor networks (WSN model, radia- tion and radioactive isotopes, wireless sensor network. I. INTRODUCTION Currently, using

  8. A MODELING APPROACH FOR LOCATING LOGISTICS PLATFORMS FOR FAST PARCEL

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    1 29 A MODELING APPROACH FOR LOCATING LOGISTICS PLATFORMS FOR FAST PARCEL DELIVERY IN URBAN AREAS for optimizing, in a sustainable way (i.e. economical, eco-friendly and societal), the location of logistics has a logistics platform right in its centre (ARENC: 41362 m2 of warehouses and offices

  9. Facility Location with Hierarchical Facility Costs Zoya Svitkina #

    E-Print Network [OSTI]

    Tardos, ?va

    Facility Location with Hierarchical Facility Costs Zoya Svitkina # ?? Eva Tardos + Abstract We consider the facility location problem with hierarchi­ cal facility costs, and give a (4 installation costs. Shmoys, Swamy and Levi [13] gave an approxi­ mation algorithm for a two­level version

  10. Comparison of Different Methods for Next Location Prediction

    E-Print Network [OSTI]

    Ungerer, Theo

    Comparison of Different Methods for Next Location Prediction Jan Petzold, Faruk Bagci, Wolfgang prediction anticipates a person's movement based on the history of previous sojourns. It is useful location prediction methods: dynamic Bayesian network, multi-layer perceptron, Elman net, Markov predictor

  11. Location of Mobile Terminals using Time Measurements and Survey Points

    E-Print Network [OSTI]

    Plataniotis, Konstantinos N.

    Location of Mobile Terminals using Time Measurements and Survey Points M. McGuire ,K.N. Plataniotis is the Time Difference of Arrival (TDoA)method where the location of the mobile terminal is estimated using research communityon technologiesthat can estimatethe loca- tion of mobile terminals. Mobile terminal

  12. Models for Offender Target Location Selection with Explicit Dependency Structures

    E-Print Network [OSTI]

    O'Leary, Michael

    Models for Offender Target Location Selection with Explicit Dependency Structures Mike O'Leary April 30 - May 1, 2012 O'Leary & Tucker (Towson University) Target Location Selection QMDNS 2012 1 / 54 in this study We thank Phil Canter from the Baltimore County Police Department for his assistance. O'Leary

  13. The photodissociation of oxetane at 193 nm as the reverse of the Paterno-Buchi reaction

    SciTech Connect (OSTI)

    Lee, Shih-Huang [National Synchrotron Radiation Research Center (NSRRC), 101 Hsin-Ann Road, Hsinchu Science Park, Hsinchu 30076, Taiwan (China)

    2009-12-14T23:59:59.000Z

    We investigated the photodissociation of oxetane (1,3-trimethylene oxide) at 193.3 nm in a molecular-beam apparatus using photofragment-translational spectroscopy and selective photoionization. We measured time-of-flight (TOF) spectra and angular anisotropy parameters {beta}(t) as a function of flight time of products at m/z=26-30 u utilizing photoionization energies from 9.8 to 14.8 eV. The TOF distributions of the products alter greatly with the employed photon energy, whereas their {beta}(t) distributions are insensitive to the photon energy. Dissociation to H{sub 2}CO+C{sub 2}H{sub 4} is the major channel in the title reaction. Three distinct dissociation paths with branching ratios 0.923:0.058:0.019 are responsible for the three features observed in the distribution of kinetic energy released in the channel H{sub 2}CO+C{sub 2}H{sub 4}. The observation of H{sub 2} and H atoms, {approx}1% in branching, indicates that products H{sub 2}CO and C{sub 2}H{sub 4} spontaneously decompose to only a small extent. Most HCO, C{sub 2}H{sub 3}, and C{sub 2}H{sub 2} ions originate from dissociative photoionization of products H{sub 2}CO and C{sub 2}H{sub 4}. Except atomic H and H{sub 2}, the photoproducts have large angular anisotropies, {beta}{>=}-0.8, which reflects rapid dissociation of oxetane following optical excitation at 193.3 nm. The mechanisms of dissociation of oxetane are addressed. Our results confirm the quantum-chemical calculations of Palmer et al. and provide profound insight into the Paterno-Buchi reaction.

  14. Fire Protection Review: Ross Aviation, Albuquerque, New Mexico

    SciTech Connect (OSTI)

    Ramsey, S.E.; Sharland, J.R.

    1991-02-01T23:59:59.000Z

    The purpose of this survey was to review the facility fire protection program and to make recommendations or to identify areas according to the following criteria established by the US Department of Energy: Recommendations which would be made as the result of a Highly Protected Risk (HPR) fire inspection of an industrial facility. (This would include human element'' recommendations.) Identification of areas where provision of automatic protection would limit a fire or explosion loss to $1,000,000. Identification of Maximum Foreseeable Loss (MFL) areas where loss potential exceeds $50,000,000 assuming a failure of automatic protection systems and subsequent reliance only on separation, fire walls, or value limitations. In private industry, the effect of insured losses on continuity of operations is referred to as Business Interruption and is usually expressed in monetary terms to cover continuing expense and loss of profit until such time as repairs are made and production is resumed. Loss of use of facility of this type does not lend itself to expression in monetary terms. Surveys of other facilities resulted in a classification system for buildings which provide an indication of the importance of the building to the fulfillment of the mission of the facility. Recommendations in this report reflect to some degree the relative importance of the facility and the time to restore it to useful condition in the event a loss were to occur.

  15. albuquerque communications cables: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    cooling by flow of dry gas, pulsed power is assumed. Potential approaches to power distribution, cable paths, and cable design for operation in a 5 T magnetic field are described....

  16. albuquerque bernalillo county: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ecosystems; Home Horticulture; Forest Resources; Food Safety, Health, Nutrition; Sustainable Living; Money Matters; 4-H YouthVolunteers Giving Recent donors residing in...

  17. 2030 Metropolitan Transportation Plan for the Albuquerque Metropolitan Planning Area

    E-Print Network [OSTI]

    Mid-Region Metropolitan Planning Organization

    2007-04-26T23:59:59.000Z

    ...................................................................13-13 #0;#1;#0;#1; #0;5#0;"#0;##0;-#0;4#0;#1; 2-1 Population Density by Municipality, 2000-2004 ..........................................................................................2-2 2-2 Population by Municipality, 2000-2004..........................................................................................................2-3... .....................................................................................14-2 14-2 Neighborhood Association and Community Group MTP Meetings....................................................14-3 #0;#1; #0;'#0;*#0;(#0;6#0;3#0;4#0;#1; 2-1 Residential Building Permits, 1990...

  18. Interactive QMESH on VAX at Sandia National Laboratories, Albuquerque

    SciTech Connect (OSTI)

    Mayes, R.L.

    1982-08-01T23:59:59.000Z

    The two-dimensional mesh generating program, QMESH, has been adapted to an interactive application, whereby a user may process finite element meshes at a computer graphics terminal communicating with a VAX computer. Additions and corrections may be made at the terminal. Several mesh variation schemes may be tried in the evolution of a desired finite element mesh. Included in the package are the bandwidth minimization programs, RENUM and RENUM8, with which a user may interactively optimize the mesh numbering.

  19. 2030 Metropolitan Transportation Plan for the Albuquerque Metropolitan Planning Area

    E-Print Network [OSTI]

    Mid-Region Metropolitan Planning Organization

    2007-04-26T23:59:59.000Z

    ;B#0;O#0;#1;#0;5#0;S#0;B#0;O#0;T#0;Q#0;P#0;S#0;U#0;B#0;U#0;J#0;P#0;O#0;#1;#0;1#0;M#0;B#0;O#0;#1;#0; #0;.#0;5#0;1#0; #0;#1; #0;G#0;P#0;S#0;#1;#0;U#0;I#0;F#0;#1;#0;"#0;M#0;C#0;V#0;R#0;V#0;F#0;S#0;R#0;V#0;F#0;#1;#0;.#0;F#0;U#0;S#0;P#0;Q#0;P#0;M#0;J#0;U#0...#0;#19;#0;#17;#0;#20;#0;#17;#0;#1;#0;.#0;F#0;U#0;S#0;P#0;Q#0;P#0;M#0;J#0;U#0;B#0;O#0;#1;#0;5#0;S#0;B#0;O#0;T#0;Q#0;P#0;S#0;U#0;B#0;U#0;J#0;P#0;O#0;#1;#0;1#0;M#0;B#0;O#0;#1;#0; #0;.#0;5#0;1#0; #0;#1; #0;G#0;P#0;S#0;#1;#0;U#0;I#0;F#0;#1;#0;"#0;M#0;C#0...

  20. Los Ranchos de Albuquerque, New Mexico: Energy Resources | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant Jump to:Landowners andLodgepole, Nebraska:LongboardLoretto,Los(Redirected

  1. New airport liquid analysis system undergoes testing at Albuquerque

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparencyDOE Project Taps HPCNew User and Data Analytics951New

  2. Albuquerque, New Mexico: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty EditCalifornia: Energy Resources Jump to: navigation, search EquivalentLea,(Redirected

  3. APM hosts contracting officers in Albuquerque | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA groupTuba City,EnrichedSupplemental DirectivesWorkNNSANAP-25 Admin Chg 1

  4. New Mexico Airlines begins Los Alamos/ Albuquerque flights April 8

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy:Nanowire Solar541,9337, 2011R - 445 CU -StandardsNew Mexico Airlines

  5. Research & Technology Showcase in Albuquerque on September 12

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Technical s o Freiberge s 3 % A PB 2 7 7 2Research &

  6. Albuquerque, New Mexico: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTriWildcat 1AMEEAisin Seikiand TelephoneAlbemarle County,AlbroJump to:

  7. Ir L (I.~ DEPARTMENT OF ENERGY ALBUQUERQUE OPERATIONS OFFICE

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling CorpNewCF INDUSTRIES,L? .-I I ,Is II:c*1r'*

  8. Anywhere But Here: An Introduction to State Control of Hazardous Waste Facility Location

    E-Print Network [OSTI]

    Tarlock, Dan A.

    1981-01-01T23:59:59.000Z

    State Control Of Hazardous- Waste Facility Location A. Danautonomy over the location of hazardous-waste managementa hazardous-waste facility-siting process is the location of

  9. Residential mobility and location choice: a nested logit model with sampling of alternatives

    E-Print Network [OSTI]

    Lee, Brian H.; Waddell, Paul

    2010-01-01T23:59:59.000Z

    Waddell, P. : Modeling residential location in UrbanSim. In:D. (eds. ) Modelling Residential Location Choice. Springer,based model system and a residential location model. Urban

  10. Dynamics and manipulation of the dominant 13.5 nm in-band extreme ultraviolet emitting region of laser-produced Sn plasmas

    E-Print Network [OSTI]

    Yuspeh, Samuel Edward

    2011-01-01T23:59:59.000Z

    manufacturing (HVM) of semiconductor microchips with nodes 32 nm and below is extreme ultraviolet (EUV) lithography using laser

  11. Page 312 Courses: Environmental Studies and Planning (ENSP) Sonoma State University 2012-2013 Catalog ENSP 306 ENviroNmENtal EthicS (3)

    E-Print Network [OSTI]

    Ravikumar, B.

    -2013 Catalog ENSP 306 ENviroNmENtal EthicS (3) An examination of philosophical issues; concepts of extending and Critical Thinking). ENSP 307 ENviroNmENtal hiStory (4) History of the American environment and the ways). ENSP 308 ENviroNmENtal litEraturE (3) A survey of great American environmental books, including H. D

  12. Characterization of septic and drain system releases at Sandia National Laboratories, New Mexico

    SciTech Connect (OSTI)

    Sanders, M.R.; Galloway, R.B. [CDM Federal Programs Corp. (United States)]|[Sandia National Labs., Albuquerque, NM (United States)

    1997-04-01T23:59:59.000Z

    Sandia National Laboratories/New Mexico (SNL/NM) is located in Albuquerque, New Mexico. The SNL/NM Environmental Restoration (ER) Project is tasked with performing the assessment and remediation of environmental releases resulting from the almost 50 years of engineering development and testing activities. Operable Unit 1295, Septic Tanks and Drainfields, includes inactive septic and drain systems at 23 separate ER sites that were listed as Solid Waste Management Units (SWMUs) in the SNL/NM Resource Conservation and Recovery Act (RCRA) Hazardous and Solid Waste Amendments (HSWA) Module Permit. These sites were identified, based on process histories and interviews with facility personnel, as the subset of all SNL/NM septic and drain systems that had the highest potential for releases of hazardous and radioactive wastes into the environment. An additional 101 septic and drain systems not currently classified as SWMUs also have been identified as needing future characterization.

  13. Efficient charge carrier injection into sub-250?nm AlGaN multiple quantum well light emitting diodes

    SciTech Connect (OSTI)

    Mehnke, Frank, E-mail: mehnke@physik.tu-berlin.de; Kuhn, Christian; Guttmann, Martin; Reich, Christoph; Kolbe, Tim; Rass, Jens; Wernicke, Tim [Technische Universitt Berlin, Institut fr Festkrperphysik, Hardenbergstr. 36, EW 6-1, 10623 Berlin (Germany); Kueller, Viola; Knauer, Arne; Lapeyrade, Mickael; Einfeldt, Sven; Weyers, Markus [Ferdinand-Braun-Institut, Leibniz-Institut fr Hchstfrequenztechnik, Gustav-Kirchhoff-Str. 4, 12489 Berlin (Germany); Kneissl, Michael [Technische Universitt Berlin, Institut fr Festkrperphysik, Hardenbergstr. 36, EW 6-1, 10623 Berlin (Germany); Ferdinand-Braun-Institut, Leibniz-Institut fr Hchstfrequenztechnik, Gustav-Kirchhoff-Str. 4, 12489 Berlin (Germany)

    2014-08-04T23:59:59.000Z

    The design and Mg-doping profile of AlN/Al{sub 0.7}Ga{sub 0.3}N electron blocking heterostructures (EBH) for AlGaN multiple quantum well (MQW) light emitting diodes (LEDs) emitting below 250?nm was investigated. By inserting an AlN electron blocking layer (EBL) into the EBH, we were able to increase the quantum well emission power and significantly reduce long wavelength parasitic luminescence. Furthermore, electron leakage was suppressed by optimizing the thickness of the AlN EBL while still maintaining sufficient hole injection. Ultraviolet (UV)-C LEDs with very low parasitic luminescence (7% of total emission power) and external quantum efficiencies of 0.19% at 246?nm have been realized. This concept was applied to AlGaN MQW LEDs emitting between 235?nm and 263?nm with external quantum efficiencies ranging from 0.002% to 0.93%. After processing, we were able to demonstrate an UV-C LED emitting at 234?nm with 14.5??W integrated optical output power and an external quantum efficiency of 0.012% at 18.2?A/cm{sup 2}.

  14. Location and design of a competitive facility for profit maximisation

    E-Print Network [OSTI]

    A single facility has to be located in competition with fixed existing facilities of .... xa and a strictly positive weight ?a, supposed to be an indicator of its buying...

  15. 2013 Fall Commencement Receptions College/School Time Location

    E-Print Network [OSTI]

    Pittendrigh, Barry

    2013 Fall Commencement Receptions College/School Time Location Agriculture 12/15 after ceremony@purdue.edu Nuclear 12/15 11:30-1:00 Nuclear Engineering Bldg, Rm 115 For more info Chrystal Randler (765

  16. Position: Forestry Intern Location: Lower Suwannee National Wildlife Refuge

    E-Print Network [OSTI]

    Mazzotti, Frank

    Position: Forestry Intern Location: Lower Suwannee National Wildlife Refuge Application Process: Student Conservation Association (SCA) Forestry and biological Wildlife Refuge. This forestry position will be mostly field work within the Lower

  17. accident location analysis: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    At the end, some safety-related recommendations are listed. Balda, F 2002-01-01 54 Multivariate data analysis based on two location vectors and two scatter matrices...

  18. Identification of critical locations across multiple infrastructures for terrorist actions

    E-Print Network [OSTI]

    Patterson, Sean A. (Sean Albert), 1981-

    2005-01-01T23:59:59.000Z

    This paper discusses a possible approach to ranking geographic regions that can influence multiple infrastructures. Once ranked, decision makers can determine whether these regions are critical locations based on their ...

  19. Location and Institution SOUTH AFRICA -PRETORIA FORDHAM UNIVERSITY -UBUNTU PROGRAM

    E-Print Network [OSTI]

    Galles, David

    Location and Institution SOUTH AFRICA - PRETORIA FORDHAM UNIVERSITY - UBUNTU demographics, and South Africa. Students will also take a required module in Sociology holders need a student visa to enter and study in South Africa, which must

  20. arbitrarily located electric: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    efficiently manage the electricity cost of distributed IDCs based on the Locational Marginal Pricing (LMP Rahman, A.K.M. Ashikur 475 Proper Use of ElectricGas UtilityType...

  1. An Information Theoretic Location Verification System for Wireless Networks

    E-Print Network [OSTI]

    Yan, Shihao; Nevat, Ido; Peters, Gareth W

    2012-01-01T23:59:59.000Z

    As location-based applications become ubiquitous in emerging wireless networks, Location Verification Systems (LVS) are of growing importance. In this paper we propose, for the first time, a rigorous information-theoretic framework for an LVS. The theoretical framework we develop illustrates how the threshold used in the detection of a spoofed location can be optimized in terms of the mutual information between the input and output data of the LVS. In order to verify the legitimacy of our analytical framework we have carried out detailed numerical simulations. Our simulations mimic the practical scenario where a system deployed using our framework must make a binary Yes/No "malicious decision" to each snapshot of the signal strength values obtained by base stations. The comparison between simulation and analysis shows excellent agreement. Our optimized LVS framework provides a defence against location spoofing attacks in emerging wireless networks such as those envisioned for Intelligent Transport Systems, wh...

  2. Methods for short-circuit identification and location in automobiles

    E-Print Network [OSTI]

    Crumlin, Alex Justin

    2006-01-01T23:59:59.000Z

    As the number of electrical components in cars increases at a rapid rate, so too does the chance for electrical failure. A method for locating shorts to the chassis of a car is developed in this thesis. The developed ...

  3. Short & long run transmission incentives for generation location

    E-Print Network [OSTI]

    Turvey, Ralph

    2006-01-01T23:59:59.000Z

    This paper is about one aspect of Britain's electricity trading system, its advantages and its weaknesses concerning the incentives it provides or fails to provide for the location of generation. (Similar considerations ...

  4. ambulance location monitoring: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    model adds a dependence on the datatype used to derive the location. M. S. Briggs; G. N. Pendleton; J. J. Brainerd; V. Connaughton; R. M. Kippen; C. Meegan; K. Hurley...

  5. Infill location determination and assessment of corresponding uncertainty

    E-Print Network [OSTI]

    Senel, Ozgur

    2009-05-15T23:59:59.000Z

    tried to solve this problem with statistical approaches. In this study, a reservoir simulation based approach was used to select infill well locations. I used multiple reservoir realizations to take different possible outcomes into consideration...

  6. Scalable Energy Efficient Location Aware Multicast Protocol for MANET (SEELAMP)

    E-Print Network [OSTI]

    Kamboj, Pariza

    2010-01-01T23:59:59.000Z

    Multicast plays an important role in implementing the group communications in bandwidth scarce multihop mobile ad hoc networks. However, due to the dynamic topology of MANETs it is very difficult to build optimal multicast trees and maintaining group membership, making even more challenging to implement scalable and robust multicast in Mobile Ad hoc Networks (MANET). A scalable and energy efficient location aware multicast algorithm, called SEELAMP, for mobile ad hoc networks is presented in the paper that is based on creation of shared tree using the physical location of the nodes for the multicast sessions. It constructs a shared bi-directional multicast tree for its routing operations rather than a mesh, which helps in achieving more efficient multicast delivery. The algorithm uses the concept of small overlapped zones around each node for proactive topology maintenance with in the zone. Protocol depends on the location information obtained using a distributed location service, which effectively reduces th...

  7. New approach to the fault location problem using synchronized sampling

    E-Print Network [OSTI]

    Mrkic, Jasna

    1994-01-01T23:59:59.000Z

    This thesis presents a new approach to solving the problem of fault location on a transmission line using synchronized data from both ends of the line. The synchronized phase voltage and current samples taken during the fault transient are used...

  8. accident locations: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Exact Location : Date of Accident : AM PM Environmental Sciences and Ecology Websites Summary: SSN Cell Phone Home...

  9. Physica E 12 (2002) 487490 www.elsevier.com/locate/physe

    E-Print Network [OSTI]

    Ludwig-Maximilians-Universität, München

    is surrounded by spacer, donor and cap layers on both sides [4]. Processing three-dimensional nano- structures) 487­490 Fig. 1. (a) Freely suspended hallbar with dimensions l=3 m; w =600 nm and d=130 nm. (b

  10. A Multi-chain Measurements Averaging TDC Implemented in a 40 nm FPGA

    E-Print Network [OSTI]

    Qi Shen; Shubin Liu; Binxiang Qi; Qi An; Shengkai Liao; Chengzhi Peng; Weiyue Liu

    2014-06-15T23:59:59.000Z

    A high precision and high resolution time-to-digital converter (TDC) implemented in a 40 nm fabrication process Virtex-6 FPGA is presented in this paper. The multi-chain measurements averaging architecture is used to overcome the resolution limitation determined by intrinsic cell delay of the plain single tapped-delay chain. The resolution and precision are both improved with this architecture. In such a TDC, the input signal is connected to multiple tapped-delay chains simultaneously (the chain number is M), and there is a fixed delay cell between every two adjacent chains. Each tapped-delay chain is just a plain TDC and should generate a TDC time for a hit input signal, so totally M TDC time values should be got for a hit signal. After averaging, the final TDC time is obtained. A TDC with 3 ps resolution (i.e. bin size) and 6.5 ps precision (i.e. RMS) has been implemented using 8 parallel tapped-delay chains. Meanwhile the plain TDC with single tapped-delay chain yields 24 ps resolution and 18 ps precision.

  11. Detonation wave profiles measured in plastic bonded explosives using 1550 nm photon doppler velocimetry (PDV)

    SciTech Connect (OSTI)

    Gustavsen, Richard L [Los Alamos National Laboratory; Bartram, Brian D [Los Alamos National Laboratory; Sanchez, Nathaniel (nate) J [Los Alamos National Laboratory

    2009-01-01T23:59:59.000Z

    We present detonation wave profiles measured in two TATB based explosives and two HMX based explosives. Profiles were measured at the interface of the explosive and a Lithium-Fluoride (LiF) window using 1550 nm Photon Doppler Velocimetry (PDV). Planar detonations were produced by impacting the explosive with a projectile launched in a gas-gun. The impact state was varied to produce varied distance to detonation, and therefore varied support of the Taylor wave following the Chapman-Jouget (CJ) or sonic state. Profiles from experiments with different support should be the same between the Von-Neumann (VN) spike and CJ state and different thereafter. Comparison of profiles with differing support, therefore, allows us to estimate reaction zone lengths. For the TATB based explosive, a reaction zone length of {approx} 3.9 mm, 500 ns was measured in EDC-35, and a reaction zone length of {approx} 6.3 mm, 800 ns was measured in PBX 9502 pre-cooled to -55 C. The respective VN spike state was 2.25 {+-} 0.05 km/s in EDC-35 and 2.4 {+-} 0.1 km/s in the cooled PBX 9502. We do not believe we have resolved either the VN spike state (> 2.6 km/s) nor the reaction zone length (<< 50 ns) in the HMX based explosives.

  12. Stress-induced piezoelectric field in GaN-based 450-nm light-emitting diodes

    SciTech Connect (OSTI)

    Tawfik, Wael Z. [Department of Materials Science and Engineering, Chonnam National University, Yongbong 300 Gwangju 500-757 (Korea, Republic of); Department of Physics, Faculty of Science, Beni-Suef University, Beni-Suef 62511 (Egypt); Hyeon, Gil Yong; Lee, June Key, E-mail: junekey@chonnam.ac.kr [Department of Materials Science and Engineering, Chonnam National University, Yongbong 300 Gwangju 500-757 (Korea, Republic of)

    2014-10-28T23:59:59.000Z

    We investigated the influence of the built-in piezoelectric field induced by compressive stress on the characteristics of GaN-based 450-nm light-emitting diodes (LEDs) prepared on sapphire substrates of different thicknesses. As the sapphire substrate thickness was reduced, the compressive stress in the GaN layer was released, resulting in wafer bowing. The wafer bowing-induced mechanical stress altered the piezoelectric field, which in turn reduced the quantum confined Stark effect in the InGaN/GaN active region of the LED. The flat-band voltage was estimated by measuring the applied bias voltage that induced a 180 phase shift in the electro-reflectance (ER) spectrum. The piezoelectric field estimated by the ER spectra changed by ?110?kV/cm. The electroluminescence spectral peak wavelength was blue-shifted, and the internal quantum efficiency was improved by about 22% at a high injection current of 100?mA. The LED on the 60-?m-thick sapphire substrate exhibited the highest light output power of ?59?mW at an injection current of 100?mA, with the operating voltage unchanged.

  13. Location of the solar dynamo and near-surface shear

    E-Print Network [OSTI]

    Axel Brandenburg

    2005-12-29T23:59:59.000Z

    The location of the solar dynamo is discussed in the context of new insights into the theory of nonlinear turbulent dynamos. It is argued that, from a dynamo-theoretic point of view, the bottom of the convection zone is not a likely location and that the solar dynamo may be distributed over the convection zone. The near surface shear layer produces not only east-west field alignment, but it also helps the dynamo disposing of its excess small scale magnetic helicity.

  14. Predicting threshold and location of laser damage on optical surfaces

    DOE Patents [OSTI]

    Siekhaus, Wigbert (Berkeley, CA)

    1987-01-01T23:59:59.000Z

    An apparatus useful in the prediction of the damage threshold of various optical devices, the location of weak spots on such devices and the location, identification, and elimination of optical surface impurities comprising, a focused and pulsed laser, an photo electric detector/imaging means, and a timer. The weak spots emit photoelectrons when subjected to laser intensities that are less than the intensity actually required to produce the damage. The weak spots may be eliminated by sustained exposure to the laser beam.

  15. Resolving three-dimensional shape of sub-50?nm wide lines with nanometer-scale sensitivity using conventional optical microscopes

    SciTech Connect (OSTI)

    Attota, Ravikiran, E-mail: Ravikiran.attota@nist.gov; Dixson, Ronald G. [Semiconductor and Dimensional Metrology Division, NIST, Gaithersburg, Maryland 20899 (United States)

    2014-07-28T23:59:59.000Z

    We experimentally demonstrate that the three-dimensional (3-D) shape variations of nanometer-scale objects can be resolved and measured with sub-nanometer scale sensitivity using conventional optical microscopes by analyzing 4-D optical data using the through-focus scanning optical microscopy (TSOM) method. These initial results show that TSOM-determined cross-sectional (3-D) shape differences of 30?nm40?nm wide lines agree well with critical-dimension atomic force microscope measurements. The TSOM method showed a linewidth uncertainty of 1.22?nm (k?=?2). Complex optical simulations are not needed for analysis using the TSOM method, making the process simple, economical, fast, and ideally suited for high volume nanomanufacturing process monitoring.

  16. Electron Transport Behavior on Gate Length Scaling in Sub-50 nm GaAs Metal Semiconductor Field Effect Transistors

    SciTech Connect (OSTI)

    Han, Jaeheon [Department of Electronic Engineering, Kangnam University, 111 Gugal-dong, Giheung-gu, Yongin-city, Gyeonggi-do, Korea 446-702 (Korea, Republic of)

    2011-12-23T23:59:59.000Z

    Short channel GaAs Metal Semiconductor Field Effect Transistors (MESFETs) have been fabricated with gate length to 20 nm, in order to examine the characteristics of sub-50 nm MESFET scaling. Here the rise in the measured transconductance is mainly attributed to electron velocity overshoot. For gate lengths below 40 nm, however, the transconductance drops suddenly. The behavior of velocity overshoot and its degradation is investigated and simulated by using a transport model based on the retarded Langevin equation (RLE). This indicates the existence of a minimum acceleration length needed for the carriers to reach the overshoot velocity. The argument shows that the source resistance must be included as an internal element, or appropriate boundary condition, of relative importance in any model where the gate length is comparable to the inelastic mean free path of the carriers.

  17. Broadband superluminescent diodes with bell-shaped spectra emitting in the range from 800 to 900 nm

    SciTech Connect (OSTI)

    Andreeva, E V; Il'ichenko, S N; Kostin, Yu O; Lapin, P I [Superlum Diodes Ltd., Moscow (Russian Federation); Ladugin, M A; Marmalyuk, A A [Open Joint-Stock Company 'M.F. Stel'makh Polyus Research and Development Institute', Moscow (Russian Federation); Yakubovich, S D [Moscow State Institute of Radio-Engineering, Electronics and Automation (Technical University), Moscow (Russian Federation)

    2013-08-31T23:59:59.000Z

    Quantum-well superluminescent diodes (SLD) with extremely thin active (AlGa)As and (InGa)As layers and centre wavelengths about 810, 840, 860 and 880 nm are experimentally studied. Their emission spectrum possesses the shape close to Gaussian, its FWHM being 30 60 nm depending on the length of the active channel and the level of pumping. Under cw injection, the output power of light-emitting modules based on such SLDs can amount to 1.0 25 mW at the output of a single-mode fibre. It is demonstrated that the operation lifetime of these devices exceeds 30000 hours. Based on the light-emitting modules the prototypes of combined BroadLighter series light sources are implemented having a bell-shaped spectrum with the width up to 100 nm. (optical radiation sources)

  18. Large-sensitive-area superconducting nanowire single-photon detector at 850 nm with high detection efficiency

    E-Print Network [OSTI]

    Li, Hao; You, Lixing; Yang, Xiaoyan; Zhang, Weijun; Liu, Xiaoyu; Chen, Sijing; Wang, Zhen; Xie, Xiaoming

    2015-01-01T23:59:59.000Z

    Satellite-ground quantum communication requires single-photon detectors of 850-nm wavelength with both high detection efficiency and large sensitive area. We developed superconducting nanowire single-photon detectors (SNSPDs) on one-dimensional photonic crystals, which acted as optical cavities to enhance the optical absorption, with a sensitive-area diameter of 50 um. The fabricated multimode fiber coupled NbN SNSPDs exhibited a maximum system detection efficiency (DE) of up to 82% and a DE of 78% at a dark count rate of 100 Hz at 850-nm wavelength as well as a system jitter of 105 ps.

  19. Nucleation of single GaN nanorods with diameters smaller than 35 nm by molecular beam epitaxy

    SciTech Connect (OSTI)

    Chen, Yen-Ting [Institute of Atomic and Molecular Sciences, Academia Sinica, 10617 Taipei, Taiwan (China) [Institute of Atomic and Molecular Sciences, Academia Sinica, 10617 Taipei, Taiwan (China); Department of Physics, Chemistry and Biology (IFM), Linkping University, S-58183 Linkping (Sweden); Araki, Tsutomu [Department of Electrical and Electronic Engineering, Ritsumeikan University, 525-8577 Shiga (Japan)] [Department of Electrical and Electronic Engineering, Ritsumeikan University, 525-8577 Shiga (Japan); Palisaitis, Justinas; Persson, Per O. .; Olof Holtz, Per; Birch, Jens [Department of Physics, Chemistry and Biology (IFM), Linkping University, S-58183 Linkping (Sweden)] [Department of Physics, Chemistry and Biology (IFM), Linkping University, S-58183 Linkping (Sweden); Chen, Li-Chyong [Center for Condensed Matter Sciences, National Taiwan University, 10617 Taipei, Taiwan (China)] [Center for Condensed Matter Sciences, National Taiwan University, 10617 Taipei, Taiwan (China); Chen, Kuei-Hsien [Institute of Atomic and Molecular Sciences, Academia Sinica, 10617 Taipei, Taiwan (China) [Institute of Atomic and Molecular Sciences, Academia Sinica, 10617 Taipei, Taiwan (China); Center for Condensed Matter Sciences, National Taiwan University, 10617 Taipei, Taiwan (China); Nanishi, Yasushi [Global Innovation Research Organization, Ritsumeikan University, 525-8577 Shiga (Japan)] [Global Innovation Research Organization, Ritsumeikan University, 525-8577 Shiga (Japan)

    2013-11-11T23:59:59.000Z

    Nucleation mechanism of catalyst-free GaN nanorod grown on Si(111) is investigated by the fabrication of uniform and narrow (<35 nm) nanorods without a pre-defined mask by molecular beam epitaxy. Direct evidences show that the nucleation of GaN nanorods stems from the sidewall of the underlying islands down to the Si(111) substrate, different from commonly reported ones on top of the island directly. Accordingly, the growth and density control of the nanorods is exploited by a narrow-pass approach that only narrow nanorod can be grown. The optimal size of surrounding non-nucleation area around single nanorod is estimated as 88 nm.

  20. VA VT CT RI MT WY CO ID UT OR NV CA AZ NM WA TN WV NC AR OK

    Broader source: Energy.gov (indexed) [DOE]

    2 1 Locations of Smart Grid Demonstration and Large-Scale Energy Storage Projects NH 32 Awards Support Projects in 24 States 6 11 MA...

  1. NM WAIDS: A PRODUCED WATER QUALITY AND INFRASTRUCTURE GIS DATABASE FOR NEW MEXICO OIL PRODUCERS

    SciTech Connect (OSTI)

    Martha Cather; Robert Lee; Ibrahim Gundiler; Andrew Sung; Naomi Davidson; Ajeet Kumar Reddy; Mingzhen Wei

    2003-04-01T23:59:59.000Z

    The New Mexico Water and Infrastructure Data System (NM WAIDS) seeks to alleviate a number of produced water-related issues in southeast New Mexico. The project calls for the design and implementation of a Geographical Information System (GIS) and integral tools that will provide operators and regulators with necessary data and useful information to help them make management and regulatory decisions. The major components of this system are: (1) databases on produced water quality, cultural and groundwater data, oil pipeline and infrastructure data, and corrosion information, (2) a web site capable of displaying produced water and infrastructure data in a GIS or accessing some of the data by text-based queries, (3) a fuzzy logic-based, site risk assessment tool that can be used to assess the seriousness of a spill of produced water, and (4) a corrosion management toolkit that will provide operators with data and information on produced waters that will aid them in deciding how to address corrosion issues. The various parts of NM WAIDS will be integrated into a website with a user-friendly interface that will provide access to previously difficult-to-obtain data and information. Primary attention during the first six months of this project has been focused on creating the water quality databases for produced water and surface water, along with collection of corrosion information and building parts of the corrosion toolkit. Work on the project to date includes: (1) Creation of a water quality database for produced water analyses. The database was compiled from a variety of sources and currently has over 4000 entries for southeast New Mexico. (2) Creation of a web-based data entry system for the water quality database. This system allows a user to view, enter, or edit data from a web page rather than having to directly access the database. (3) Creation of a semi-automated data capturing system for use with standard water quality analysis forms. This system improves the accuracy and speed of water quality data entry. (4) Acquisition of ground water data from the New Mexico State Engineer's office, including chloride content and TDS (Total Dissolved Solids) for over 30,000 data points in southeast New Mexico. (5) Creation of a web-based scale prediction tool, again with a web-based interface, that uses two common scaling indices (Stiff-Davis and Oddo-Thomson) to predict the likelihood of scaling. This prediction tool can either run from user input data, or the user can select samples from the water analysis database. (6) Creation of depth-to-groundwater maps for the study area. (7) Analysis of water quality data by formation. (8) Continuation of efforts to collect produced water quality information from operators in the southeast New Mexico area. (9) Qualitative assessment of produced water from various formations regarding corrosivity. (10) Efforts at corrosion education in the region through operator visits. Future work on this project will include: (11) Development of an integrated web and GIS interface for all the information collected in this effort. (12) Continued development of a fuzzy logic spill risk assessment tool that was initially developed prior to this project. Improvements will include addition of parameters found to be significant in determining the impact of a brine spill at a specific site. (13) Cleanup and integration of water quality databases. (14) Compilation of both hard copy and online corrosion toolkit material.

  2. NM WAIDS: A PRODUCED WATER QUALITY AND INFRASTRUCTURE GIS DATABASE FOR NEW MEXICO OIL PRODUCERS

    SciTech Connect (OSTI)

    Martha Cather; Robert Lee; Ibrahim Gundiler; Andrew Sung

    2003-09-24T23:59:59.000Z

    The New Mexico Water and Infrastructure Data System (NM WAIDS) seeks to alleviate a number of produced water-related issues in southeast New Mexico. The project calls for the design and implementation of a Geographical Information System (GIS) and integral tools that will provide operators and regulators with necessary data and useful information to help them make management and regulatory decisions. The major components of this system are: (1) Databases on produced water quality, cultural and groundwater data, oil pipeline and infrastructure data, and corrosion information. (2) A web site capable of displaying produced water and infrastructure data in a GIS or accessing some of the data by text-based queries. (3) A fuzzy logic-based, site risk assessment tool that can be used to assess the seriousness of a spill of produced water. (4) A corrosion management toolkit that will provide operators with data and information on produced waters that will aid them in deciding how to address corrosion issues. The various parts of NM WAIDS will be integrated into a website with a user-friendly interface that will provide access to previously difficult-to-obtain data and information. Primary attention during the first six months of this project was focused on creating the water quality databases for produced water and surface water, along with collecting of corrosion information and building parts of the corrosion toolkit. Work on the project to date includes: (1) Creation of a water quality database for produced water analyses. The database was compiled from a variety of sources and currently has over 7000 entries for New Mexico. (2) Creation of a web-based data entry system for the water quality database. This system allows a user to view, enter, or edit data from a web page rather than having to directly access the database. (3) Creation of a semi-automated data capturing system for use with standard water quality analysis forms. This system improves the accuracy and speed of water quality data entry. (4) Acquisition of ground water data from the New Mexico State Engineer's office, including chloride content and TDS (Total Dissolved Solids) for over 30,000 data points in southeast New Mexico. (5) Creation of a web-based scale prediction tool, again with a web-based interface, that uses two common scaling indices to predict the likelihood of scaling. This prediction tool can either run from user input data, or the user can select samples from the water analysis database. (6) Creation of depth-to-groundwater maps for the study area. (7) Analysis of water quality data by formation. (8) Continuation of efforts to collect produced water quality information from operators in the southeast New Mexico area. (9) Qualitative assessment of produced water from various formations regarding corrosivity. (10) Efforts at corrosion education in the region through operator visits. Future work on this project will include: (1) Development of an integrated web and GIS interface for all the information collected in this effort. (2) Continued development of a fuzzy logic spill risk assessment tool that was initially developed prior to this project. Improvements will include addition of parameters found to be significant in determining the impact of a brine spill at a specific site. (3) Compilation of both hard copy and online corrosion toolkit material.

  3. Naftali(Tuli)Herscovici 52 Agnes Drive

    E-Print Network [OSTI]

    Electricaland Computer Engineering universityof New Mexico Albuquerque, NM 87131-1356USA t 1 (505) 277-1439(Fax& Computer EngineeringDepartment,The Universityof New Mexico Albuquerque, New Mexico 87131 E-mail: {rjordan the standards in wireless LANs, focusing on the bottom-two layers of the Open System Interconnect (03)model (see

  4. Impurity-doped optical shock, detonation and damage location sensor

    DOE Patents [OSTI]

    Weiss, J.D.

    1995-02-07T23:59:59.000Z

    A shock, detonation, and damage location sensor providing continuous fiber-optic means of measuring shock speed and damage location, and could be designed through proper cabling to have virtually any desired crush pressure. The sensor has one or a plurality of parallel multimode optical fibers, or a singlemode fiber core, surrounded by an elongated cladding, doped along their entire length with impurities to fluoresce in response to light at a different wavelength entering one end of the fiber(s). The length of a fiber would be continuously shorted as it is progressively destroyed by a shock wave traveling parallel to its axis. The resulting backscattered and shifted light would eventually enter a detector and be converted into a proportional electrical signals which would be evaluated to determine shock velocity and damage location. The corresponding reduction in output, because of the shortening of the optical fibers, is used as it is received to determine the velocity and position of the shock front as a function of time. As a damage location sensor the sensor fiber cracks along with the structure to which it is mounted. The size of the resulting drop in detector output is indicative of the location of the crack. 8 figs.

  5. Impurity-doped optical shock, detonation and damage location sensor

    DOE Patents [OSTI]

    Weiss, Jonathan D. (Albuquerque, NM)

    1995-01-01T23:59:59.000Z

    A shock, detonation, and damage location sensor providing continuous fiber-optic means of measuring shock speed and damage location, and could be designed through proper cabling to have virtually any desired crush pressure. The sensor has one or a plurality of parallel multimode optical fibers, or a singlemode fiber core, surrounded by an elongated cladding, doped along their entire length with impurities to fluoresce in response to light at a different wavelength entering one end of the fiber(s). The length of a fiber would be continuously shorted as it is progressively destroyed by a shock wave traveling parallel to its axis. The resulting backscattered and shifted light would eventually enter a detector and be converted into a proportional electrical signals which would be evaluated to determine shock velocity and damage location. The corresponding reduction in output, because of the shortening of the optical fibers, is used as it is received to determine the velocity and position of the shock front as a function of time. As a damage location sensor the sensor fiber cracks along with the structure to which it is mounted. The size of the resulting drop in detector output is indicative of the location of the crack.

  6. Calibration of Silver Plasmon Rulers in the 1-25 nm Separation Range: Experimental Indications of Distinct Plasmon Coupling Regimes

    E-Print Network [OSTI]

    Calibration of Silver Plasmon Rulers in the 1-25 nm Separation Range: Experimental Indications of Distinct Plasmon Coupling Regimes Linglu Yang, Hongyun Wang, Bo Yan, and Bjorn M. Reinhard* Department nanoparticles, so-called silver plasmon rulers, are synthesized with use of a rational DNA programmed self

  7. June 15, 2004 / Vol. 29, No. 12 / OPTICS LETTERS 1357 Highly coherent light at 13 nm generated by use of

    E-Print Network [OSTI]

    Bartels, Randy

    , and in developing new types of nano- probe. However, many EUV sources, such as synchrotrons and undulators1 and high Bartels et al. demonstrated that EUV light produced by HHG in gas-filled hollow waveguides exhibits full spatial coherence at wavelengths around 30 nm.3 The extended propagation length in the hollow

  8. Power Supply Optimization in Sub-130 nm Leakage Dominant Technologies Man L Mui Kaustav Banerjee Amit Mehrotra

    E-Print Network [OSTI]

    Power Supply Optimization in Sub-130 nm Leakage Dominant Technologies Man L Mui Kaustav Banerjee a methodology for systematically optimizing the power supply voltage for maximizing the performance of VLSI cir- cuits in technologies where leakage power is not an insignificant fraction of the total power

  9. Photodissociation of Ozone from 321 to 329 nm: The Relative Yields P2) with O2(X 3

    E-Print Network [OSTI]

    Houston, Paul L.

    Photodissociation of Ozone from 321 to 329 nm: The Relative Yields of O(3 P2) with O2(X 3 g - ), O2 Supporting Information ABSTRACT: Product imaging of O(3 P2) following dissociation of ozone has been used to determine the relative yields of the product channels O(3 P2) + O2(X 3 g - ) of ozone. All three channels

  10. A Fiber-Optic-Based 1550-nm Laser Radar Altimeter with RF Pulse Compression Christopher Allen, Sivaprasad Gogineni

    E-Print Network [OSTI]

    Kansas, University of

    A Fiber-Optic-Based 1550-nm Laser Radar Altimeter with RF Pulse Compression Christopher Allen-the-shelf fiber-optic components and traditional RF and digital signal processing techniques to achieve fine erbium-doped fiber amplifiers (EDFAs) could be used to provide optical gain. The transmitted signal

  11. Development of a 1319 nm Laser Radar using Fiber-Optics and RF Pulse Compression: Receiver Characterization

    E-Print Network [OSTI]

    Kansas, University of

    Development of a 1319 nm Laser Radar using Fiber-Optics and RF Pulse Compression: Receiver and commercially available fiber-optic technologies. We use radio frequency (RF) pulse compression and digital commensurate with the desired range accuracy. With today's off-the-shelf fiber-optic components, multi

  12. Low-threshold, mirrorless emission at 981 nm in an Yb,Gd,Lu:KYW inverted rib waveguide laser

    E-Print Network [OSTI]

    Low-threshold, mirrorless emission at 981 nm in an Yb,Gd,Lu:KYW inverted rib waveguide laser Amol for generating short pulses [2]. Liquid phase epitaxy has been used to fabricate planar [3, 4] and channel [5, 6W and a channel waveguide laser with an output power of 11 mW [9]. In this paper we demonstrate mirrorless lasing

  13. 2512 IEEE TRANSACTIONS ON PLASMA SCIENCE, VOL. 36, NO. 5, OCTOBER 2008 Experimental Investigation of 193-nm

    E-Print Network [OSTI]

    Scharer, John E.

    2512 IEEE TRANSACTIONS ON PLASMA SCIENCE, VOL. 36, NO. 5, OCTOBER 2008 Experimental Investigation of 193-nm Laser Breakdown in Air Magesh Thiyagarajan, Member, IEEE, and John E. Scharer, Senior Member, IEEE Abstract--We present the measurements and analysis of laser- induced breakdown processes in dry

  14. Sub-10-nm half-pitch electron-beam lithography by using poly,,methyl methacrylate... as a negative resist

    E-Print Network [OSTI]

    Berggren, Karl K.

    is of great importance for high-density magnetic storage, integrated circuits, and nanoelectronic and nanophotonic devices. Until now, hydrogen silsesquioxane HSQ and calixarene were the only two reported negative, the authors report that 10-nm half-pitch dense nanostructures can also be readily fabricated using the well

  15. A 65nm CMOS Ultra Low Power and Low Noise 131M Front-End Transimpedance Amplifier

    E-Print Network [OSTI]

    Ayers, Joseph

    A 65nm CMOS Ultra Low Power and Low Noise 131M Front-End Transimpedance Amplifier Jiaping Hu and simulation of a high-transimpedance gain, ultra low-power dissipation and low-noise CMOS front- end control [3]. However, it introduces design challenges in the form of trade-offs between noise, power

  16. Using Mobilize Power Management IP for Dynamic & Static Power Reduction in SoC at 130 nm

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Using Mobilize Power Management IP for Dynamic & Static Power Reduction in SoC at 130 nm Dan Tensilica's 32-bit Xtensa microprocessor core, using Virtual Silicon's Power Management IP. Independent of incorporating more and more devices on a single chip, but also managing the increase in the power that goes

  17. Abstract--High speed, oxide-confined, polyimide-planarized 850 nm vertical cavity surface emitting lasers (VCSELs) exhibit

    E-Print Network [OSTI]

    Lear, Kevin L.

    10760 1 Abstract--High speed, oxide-confined, polyimide-planarized 850 nm vertical cavity surface using a reproducible, simple process incorporating polyimide with good adhesion that does not require based on a simplified, robust process incorporating photosensitive polyimide with good metal adhesion

  18. Dynamics of cavitation bubble induced by 193 nm ArF excimer laser in concentrated sodium chloride solutions

    E-Print Network [OSTI]

    Palanker, Daniel

    of pulsed lasers for ablation, drilling, and cutting of soft tissues in liquid environments are accompaniedDynamics of cavitation bubble induced by 193 nm ArF excimer laser in concentrated sodium chloride solutions Igor Turovets and Daniel Palanker Laser Center, Hadassah University Hospital, P.O. Box 12000

  19. High resolution photoelectron images and D{sup +} photofragment images following 532-nm photolysis of D{sub 2}

    SciTech Connect (OSTI)

    Chandler, D.W.; Neyer, D.W. [Sandia National Labs., Livermore, CA (United States); Heck, A.J. [Univ. of Warwick, Coventry (United Kingdom). Dept. of Chemistry

    1998-01-01T23:59:59.000Z

    The non-resonant ionization and dissociation of D{sub 2} by intense 532-nm laser light is studied by a variation of the ``Ion Imaging`` technique called ``Velocity Mapping``. Images of the both the photoelectrons and D{sup +} photofragments are obtained and analyzed at two different laser intensities. Results are compared to previous studies and several differences are discussed.

  20. The effects of 100 nm-diameter Au nanoparticles on dye-sensitized solar Changwoo Nahm,1

    E-Print Network [OSTI]

    Park, Byungwoo

    The effects of 100 nm-diameter Au nanoparticles on dye-sensitized solar cells Changwoo Nahm,1 nanoparticles for dye-sensitized solar cells (DSSCs). At the optimum Au/TiO2 mass ratio of 0.05, the power nanoparticles were also introduced to the electrodes of dye-sensitized solar cells (DSSCs), and the solar-cell

  1. Summary Leaf reflectance at visible and near-infrared wavelengths (4001000 nm) is related primarily to pigmenta-

    E-Print Network [OSTI]

    Richardson, Andrew D.

    Summary Leaf reflectance at visible and near-infrared wavelengths (4001000 nm) is related physiology and relationships between plants and their growth environment. We studied reflectance of two co collected from 24 sites and white spruce from 30 sites. Overall, reflectance spectra of the two species were

  2. South Of Espanola; North Of Pojoaque At Intersection of NM399 and US 84/285 Turn onto 399(WSW),

    E-Print Network [OSTI]

    Kurien, Susan

    will be on your left, Go to third house on right (#18 on fence), 1.5 story adobe with passive solar Windows facing at Affordable Price Or Possible Lease or Lease to Purchase 18 Terrace Farm Rd LaMesilla, NM 2 story passive the Puye Ruins on Santa Clara Pueblo. House is oriented with huge solar windows facing due south toward

  3. Development of scanning x-ray fluorescence microscope with spatial resolution of 30 nm using Kirkpatrick-Baez mirror optics

    SciTech Connect (OSTI)

    Matsuyama, S.; Mimura, H.; Yumoto, H.; Sano, Y.; Yamamura, K.; Yabashi, M.; Nishino, Y.; Tamasaku, K.; Ishikawa, T.; Yamauchi, K. [Department of Precision Science and Technology, Graduate School of Engineering, Osaka University, 2-1 Yamada-oka, Suita, Osaka 565-0871 (Japan); Research Center for Ultra-Precision Science and Technology, Graduate School of Engineering, Osaka University, 2-1 Yamada-oka, Suita, Osaka 565-0871 (Japan); SPring-8/Japan Synchrotron Radiation Research Institute (JASRI), 1-1-1 Kouto, Sayoucho, Sayogun, Hyogo 679-5148 (Japan); SPring-8/RIKEN, 1-1-1 Kouto, Sayoucho, Sayogun, Hyogo 679-5148 (Japan); Department of Precision Science and Technology, Graduate School of Engineering, Osaka University, 2-1 Yamada-oka, Suita, Osaka 565-0871 (Japan)

    2006-10-15T23:59:59.000Z

    We developed a high-spatial-resolution scanning x-ray fluorescence microscope (SXFM) using Kirkpatrick-Baez mirrors. As a result of two-dimensional focusing tests at BL29XUL of SPring-8, the full width at half maximum of the focused beam was achieved to be 50x30 nm{sup 2} (VxH) under the best focusing conditions. The measured beam profiles were in good agreement with simulated results. Moreover, beam size was controllable within the wide range of 30-1400 nm by changing the virtual source size, although photon flux and size were in a trade-off relationship. To demonstrate SXFM performance, a fine test chart fabricated using focused ion beam system was observed to determine the best spatial resolution. The element distribution inside a logo mark of SPring-8 in the test chart, which has a minimum linewidth of approximately 50-60 nm, was visualized with a spatial resolution better than 30 nm using the smallest focused x-ray beam.

  4. A flexible location management scheme for mobile computing

    E-Print Network [OSTI]

    Zhang, Ying

    1996-01-01T23:59:59.000Z

    , ation B. Distril?Ite&1 Datahase Management System (DBMS) . C. Prototype Design and Conhgurat, ion 24 24 99 vn CHAPTER Pa. ge IV EXPERIMENTAL RESULTS . A. ExpeHmental Results B. Analytic Results 38 V CONCLUSION REFERENCES 43 VITA 47 vn1... rent l)DBMS's. tVe have cleveloped an experimental prototype t, hat rc&nsiclers these charact, eris- tics of a, location mauagen&ent system. The nltin&ate purpose of' this prototype is to demonstrate the feasibility of our proposecl location...

  5. Predicting threshold and location of laser damage on optical surfaces

    DOE Patents [OSTI]

    Siekhaus, W.

    1985-02-04T23:59:59.000Z

    Disclosed is an apparatus useful in the prediction of the damage threshold of various optical devices, the location of weak spots on such devices and the location, identification, and elimination of optical surface impurities. The apparatus comprises a focused and pulsed laser, a photo electric detector/imaging means, and a timer. The weak spots emit photoelectrons when subjected to laser intensities that are less than the intensity actually required to produce the damage. The weak spots may be eliminated by sustained exposure to the laser beam.

  6. OnLocation, Inc., Energy Systems Consulting Hydrogen Scenarios

    E-Print Network [OSTI]

    Delivery Analysis Meeting by Frances Wood OnLocation, Inc. Energy Systems Consulting May 9, 2007 #12;On simulates energy production, consumption, and conversion sectors including hydrogen. D e m a n d C o m p o Activity Module Macroeconomic Activity Module Oil and Gas Supply Module Nat. Gas T&D Module Renewable Fuels

  7. Engineering and Computing Open Day Programme 2012 Activity Time Location

    E-Print Network [OSTI]

    Berzins, M.

    Engineering and Computing Open Day Programme 2012 Activity Time Location Building Number What is Engineering? (Talk) 0900 - 0945 Electronic and Electrical Engineering, Rhodes Lecture Theatre 51 1000 - 1045 EC Stoner Building, School of Computing, Reception (Level 7) 73 Electronic Engineering (Talk) 1000

  8. Connectivity Based Location Estimation Scheme for Wireless Ad Hoc Networks

    E-Print Network [OSTI]

    Ramanathan, Parameswaran "Parmesh"

    Connectivity Based Location Estimation Scheme for Wireless Ad Hoc Networks Niveditha Sundaram. The loca- tion estimates rely on neighborhood relationships gathered by each user through message, form factors, energy consumption, etc., providing GPS support may not be feasible even in outdoor

  9. Geoforum xxx (2007) xxxxxx www.elsevier.com/locate/geoforum

    E-Print Network [OSTI]

    Colorado at Boulder, University of

    2007-01-01T23:59:59.000Z

    Geoforum xxx (2007) xxxxxx www.elsevier.com/locate/geoforum 0016-7185/$ - see front matter 2007 contributed equally to the writing of this paper. #12;2 M.T. BoykoV, J.M. BoykoV / Geoforum xxx (2007) xxxxxx

  10. Rapid location of mount points JONATHAN M. SMITH

    E-Print Network [OSTI]

    ­­ ­­ Rapid location of mount points JONATHAN M. SMITH Computer Science Department, Columbia ``core'' is ``/u2/smith/core''. The current directory is a directory­valued variable. It is an implied traversal; the root contains itself. This scheme is extensible across multiple media through mount points

  11. Building and Facility Codes Code Building Location Bldg # Coordinates

    E-Print Network [OSTI]

    Russell, Lynn

    Building and Facility Codes Code Building Location Bldg # Coordinates APM Applied Physics & Mathematics Building Muir 249 F7 ASANT Asante Hall Eleanor Roosevelt 446 F5 BIO Biology Building Muir 259 F7 BIRCH Birch Aquarium SIO 2300 S-D7 BONN Bonner Hall Revelle 131 G8 BSB Biomedical Sciences Building

  12. Double Difference Earthquake Locations at the Salton Sea Geothermal Reservoir

    SciTech Connect (OSTI)

    Boyle, K L; Hutchings, L J; Bonner, B P; Foxall, W; Kasameyer, P W

    2007-08-08T23:59:59.000Z

    The purpose of this paper is to report on processing of raw waveform data from 4547 events recorded at 12 stations between 2001 and 2005 by the Salton Sea Geothermal Field (SSGF) seismic network. We identified a central region of the network where vertically elongated distributions of hypocenters have previously been located from regional network analysis. We process the data from the local network by first autopicking first P and S arrivals; second, improving these with hand picks when necessary; then, using cross-correlation to provide very precise P and S relative arrival times. We used the HypoDD earthquake location algorithm to locate the events. We found that the originally elongated distributions of hypocenters became more tightly clustered and extend down the extent of the study volume at 10 Km. However, we found the shapes to depend on choices of location parameters. We speculate that these narrow elongated zones of seismicity may be due to stress release caused by fluid flow.

  13. Location-Based Tax Incentives: Evidence From India Ritam Chaurey

    E-Print Network [OSTI]

    Bandyopadhyay, Antar

    in India. Specifically, I examine the federally financed New Industrial Policy for the statesLocation-Based Tax Incentives: Evidence From India Ritam Chaurey Department of Economics, State University of New York, Binghamton August 24, 2014 Abstract While policies targeting particular geographic

  14. Optimizing Controller Location in Networked Control Systems with Packet Drops

    E-Print Network [OSTI]

    Optimizing Controller Location in Networked Control Systems with Packet Drops C. L. Robinson1 and P in answering these two questions is that analysis of optimality in networked control systems subject to random mechanisms for wireless networked control systems [8, 6, 5]. In this paper we consider the issue of optimal

  15. activation test locations: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    activation test locations First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Active Testing CERN Preprints...

  16. a r r i o r BUILDING# NAME LOCATION

    E-Print Network [OSTI]

    Carver, Jeffrey C.

    Admissions Parking Palmer Lake B l a c k W a r r i o r R i v e r BUILDING# NAME LOCATION 3430 1FamilyResearchClinic 10-F 5016 ChildDevelopmentResearchCenter 10-L 1040 ClarkHall 8-E 6082 ColemanColiseum 15-G 6086 Crisp

  17. a r r i o r BUILDING# NAME LOCATION

    E-Print Network [OSTI]

    Carver, Jeffrey C.

    Palmer Lake B l a c k W a r r i o r R i v e r BUILDING# NAME LOCATION 3430 1North 3-I 5020 600 1052 Ceramics 8-F 1160 ChildandFamilyResearchClinic 10-F 5016 ChildDevelopmentResearchCenter 10-L 1040

  18. Lab 4: Plate Tectonics Locating Geologic Hazards Introduction

    E-Print Network [OSTI]

    Chen, Po

    1 Lab 4: Plate Tectonics Locating Geologic Hazards Introduction The likelihood of major geologic hazards associated with the lithosphere, such as earthquakes and volcanoes, is not uniform around provides a ready explanation for the distribution of these types of geologic hazards. It is useful

  19. NAME: Eelgrass Restoration in Puget Sound LOCATION: Puget Sound, WA

    E-Print Network [OSTI]

    US Army Corps of Engineers

    NAME: Eelgrass Restoration in Puget Sound LOCATION: Puget Sound, WA ACRES: 3,700 acres of subtidal restoration efforts and to contribute to the Puget Sound Partnership's Action Agenda recovery goal of 20% more within the Puget Sound region of the Salish Sea: the Nisqually, Elwha, and Skokomish Rivers. These major

  20. Optimal Location of a Mobile Sensor Continuum for Environmental Monitoring

    E-Print Network [OSTI]

    Boyer, Edmond

    air pollution monitoring, seismic monitoring, or monitoring of large infrastructures in civil is proposed for the goal of optimal location of a mobile sensor continuum. The monitoring of pollution on a 2D or track distributed environmental phenomena (weather, seismic events, wildfires, air, soil or river

  1. Location-based information system for open spaces

    E-Print Network [OSTI]

    Tejavanija, Kampanart

    2004-11-15T23:59:59.000Z

    OF SCIENCE August 2004 Major Subject: Construction Management LOCATION-BASED INFORMATION SYSTEM FOR OPEN SPACES A Thesis by KAMPANART TEJAVANIJA Submitted to the Office of Graduate Studies of Texas A&M University...-Chair of Committee) (Co-Chair of Committee) _______________________________ _____________________________ Robert E. Johnson James C. Smith (Member) (Head of Department) August 2004 Major Subject: Construction Management iii ABSTRACT...

  2. Icarus 182 (2006) 343349 www.elsevier.com/locate/icarus

    E-Print Network [OSTI]

    California at Berkeley, University of

    Icarus 182 (2006) 343­349 www.elsevier.com/locate/icarus Solar wind plasma protrusion, Finland i Finnish Meteorological Institute, Box 503, FIN-00101 Helsinki, Finland j Space Physics Research. The peak electron energy often exceeds the peak energy at the bow shock that indicates a significant

  3. TWRS information locator database system administrator`s manual

    SciTech Connect (OSTI)

    Knutson, B.J., Westinghouse Hanford

    1996-09-13T23:59:59.000Z

    This document is a guide for use by the Tank Waste Remediation System (TWRS) Information Locator Database (ILD) System Administrator. The TWRS ILD System is an inventory of information used in the TWRS Systems Engineering process to represent the TWRS Technical Baseline. The inventory is maintained in the form of a relational database developed in Paradox 4.5.

  4. A Directionality based Location Discovery Scheme for Wireless Sensor Networks

    E-Print Network [OSTI]

    Ha, Dong S.

    A Directionality based Location Discovery Scheme for Wireless Sensor Networks Asis Nasipuri and Kai is a large ad hoc network of densely dis- tributed sensors that are equipped with low power wireless number of such wireless sensors can be networked to coordinate amongst themselves and per- form the much

  5. About Michigan Tech Michigan Tech is located in

    E-Print Network [OSTI]

    Honrath, Richard E.

    About Michigan Tech Michigan Tech is located in Houghton, MI on the south shore of Lake Superior and in the community. Michigan Tech is rated as one of the safest college campuses in the United States, and the local and Environmental Engineering The Civil and Environmental Engineering Department at Michigan Tech includes 26

  6. COMMUNICATION Does the Location of a Mutation Determine the Ability

    E-Print Network [OSTI]

    Regan, Lynne

    COMMUNICATION Does the Location of a Mutation Determine the Ability to Form Amyloid Fibrils? Marina by a domain swapping mechanism. Domain swapping is a specific means by which oligomeric proteins are formed that the mutations in our model system facilitate domain swapping as the pathway to amyloid for- mation (Figure 1(b

  7. Icarus 181 (2006) 302308 www.elsevier.com/locate/icarus

    E-Print Network [OSTI]

    2006-01-01T23:59:59.000Z

    Icarus 181 (2006) 302308 www.elsevier.com/locate/icarus Near-infrared spectra of laboratory H2O could change peaks in the near-IR as well. This would complicate the interpretation of reflection online 13 December 2005 Abstract We present 1.2519 m infrared spectra of pure solid CH4 and H2O/CH4

  8. www.elsevier.com/locate/neucom Author's Accepted Manuscript

    E-Print Network [OSTI]

    Bartlett, Marian Stewart

    embodiment (e.g., perception-action systems, biomechanics, motor control), and sensitivity to cognitivewww.elsevier.com/locate/neucom Author's Accepted Manuscript New trends in cognitive science Bartlett and Tony Jebara, New trends in cognitive science: Integrative approaches to learning

  9. Evolving Cellular Automata for Location Management in Mobile Computing Networks

    E-Print Network [OSTI]

    Ha, Dong S.

    entering one of these reporting cells. To create such an evolving CA system, cells in the network for a number of test problems. Index Terms--Cellular automata, genetic algorithms, mobile computing, mobility to interferences. On the other hand, a miss on the location of a mobile terminal will necessitate a search

  10. Structural Location of Disease-associated Single-nucleotide Polymorphisms

    E-Print Network [OSTI]

    Pervouchine, Dmitri D.

    Structural Location of Disease-associated Single-nucleotide Polymorphisms Nathan O. Stitziel1 , Yan-synonymous single-nucleotide polymorphism (nsSNP) of genes introduces amino acid changes to proteins, and plays reserved Keywords: single-nucleotide polymorphism; alpha shape; hidden Markov model; surface pockets

  11. Employer Organization Name Internship Title Internship Location Application

    E-Print Network [OSTI]

    Steele, Brian

    Posted or Modified Employer Organization Name Internship Title Internship Location Application Deadline Click Link Below 6/20/2014 Live Commercial Advertising, Inc. INTERNSHIPS & COLLEGE GRADUATES INTERN Missoula, MT 9/14/2014 Click Here #12;Posted or Modified Employer Organization Name Internship

  12. VEHICLE USE RECORD M/Y DEPARTMENT VEHICLE LOCATION

    E-Print Network [OSTI]

    Watson, Craig A.

    VEHICLE USE RECORD M/Y DEPARTMENT VEHICLE LOCATION Date Origin/Destination Purpose Time Out Time) Accuracy of Information (b) Valid Driver's License VEHICLE # TAG # VEHICLE MAKE, MODEL, AND YEAR NOTE: Vehicle logs must be maintained for audit purposes. It is important that all of the required information

  13. Seismic Event Location: Nonlinear Inversion Using a Neighbourhood Algorithm

    E-Print Network [OSTI]

    Sambridge, Malcolm

    is an important part of seismological practice with a wide range of applications, but has particularly signi and the majority of natural earthquakes is provided by the depth of the source. Drilling techniques there is a need to obtain the best possible location by combining data from regional and more distant stations

  14. accident prone locations: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    accident prone locations First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Accident proneness as an...

  15. Quantifying Network Denial of Service: A Location Service Case Study

    E-Print Network [OSTI]

    Kubiatowicz, John D.

    1 Quantifying Network Denial of Service: A Location Service Case Study Yan Chen, Adam Bargteil distributed denial-of-service (DDoS) attacks with a few keystrokes [11]. Besides these com- mon flooding classes of network DoS at- tacks, we propose a novel benchmarking methodology and apply it to study

  16. Location and Geology Fig 1. The Macasty black shale

    E-Print Network [OSTI]

    , Quebec, is organic-rich black shale and hosting oil and gas. It is equivalent to the Ithaca shaleLocation and Geology Fig 1. The Macasty black shale in the Anticosti Island in the Gulf of St. d13C for calcite disseminated in the black shale range from 2.6o to 2.8 / The values are lower

  17. Network Based Approaches for Clustering and Location Decisions

    E-Print Network [OSTI]

    Verma, Anurag

    2012-10-19T23:59:59.000Z

    in large scale graphs, determining location of facilities for pre-positioning emergency relief supplies, and selecting nodes to form a virtual backbone in a wireless sensor network. To begin with, a new clique relaxation called a k-community is defined...

  18. INTERNATIONAL JOURNAL OF WIRELESS AND MOBILE COMPUTING 1 Effective Location-Guided Overlay Multicast in

    E-Print Network [OSTI]

    Nahrstedt, Klara

    INTERNATIONAL JOURNAL OF WIRELESS AND MOBILE COMPUTING 1 Effective Location-Guided Overlay: location-guided k-ary (LGK) tree, location-guided directional (LGD) tree, and location-guided Steiner (LGS. To augment and enhance our location- guided tree construction algorithms, we propose several companion

  19. Cytometer LASER (nm) Detector range Fluorochrome Names check LSRII-A UV 355 A 505-550 Indo-1 (Blue)

    E-Print Network [OSTI]

    Oliver, Douglas L.

    Cytometer LASER (nm) Detector range Fluorochrome Names check LSRII-A UV 355 A 505-550 Indo-1 (Blue) B 420-460 Live Dead UV Blue Alexa 350 DAPI Indo-1(Violet) Hoechst 33342 C - empty Violet 405 A 505-550 Pac. Orange V500 VioGreen BVio 510 Viability Dye eF506 Alexa 430 Sapphire B 420-460 Pac. Blue eF450 V

  20. First Observation of Self-Amplified Spontaneous Emission in a Free-Electron Laser at 109 nm Wavelength

    E-Print Network [OSTI]

    Andruszkw, J; Ayvazyan, V T; Baboi, N I; Bakker, R; Balakin, V; Barni, D; Bazhan, A; Bernard, M; Bosotti, A; Bourdon, J C; Brefeld, W; Brinkmann, R; Bhler, S; Carneiro, J P; Castellano, M G; Castro, P; Catani, L; Chel, S; Cho, Y; Choroba, S; Colby, E R; Decking, W; Den Hartog, P; Desmons, M; Dohlus, M; Edwards, D; Edwards, H T; Faatz, B; Feldhaus, J; Ferrario, M; Fitch, M J; Flttmann, K; Fouaidy, M; Gamp, A; Garvey, Terence; Geitz, M A; Gluskin, E S; Gretchko, V; Hahn, U; Hartung, W H; Hubert, D; Hning, M; Ischebek, R; Jablonka, M; Joly, J M; Juillard, M; Junquera, T; Jurkiewicz, P; Kabel, A C; Kahl, J; Kaiser, H; Kamps, T; Katelev, V V; Kirchgessner, J L; Krfer, M; Kravchuk, L V; Kreps, G; Krzywinski, J; Lokajczyk, T; Lange, R; Leblond, B; Leenen, M; Lesrel, J; Liepe, M; Liero, A; Limberg, T; Lorenz, R; Lu, H H; Lu, F H; Magne, C; Maslov, M A; Materlik, G; Matheisen, A; Menzel, J; Michelato, P; Mller, W D; Mosnier, A; Mller, U C; Napoly, O; Novokhatskii, A V; Omeich, M; Padamsee, H; Pagani, C; Peters, F; Petersen, B; Pierini, P; Pflger, J; Piot, P; Phung Ngoc, B; Plucinski, L; Proch, D; Rehlich, K; Reiche, S; Reschke, D; Reyzl, I; Rosenzweig, J; Rossbach, J; Roth, S; Saldin, E L; Sandner, W; Sanok, Z; Schlarb, H; Schmidt, G; Schmser, P; Schneider, J R; Schneidmiller, E A; Schreiber, H J; Schreiber, S; Schtt, P; Sekutowicz, J; Serafini, L; Sertore, D; Setzer, S; Simrock, S; Sonntag, B F; Sparr, B; Stephan, F; Sytchev, V V; Tazzari, S; Tazzioli, F; Tigner, Maury; Timm, M; Tonutti, M; Trakhtenberg, E; Treusch, R; Trines, D; Verzilov, V A; Vielitz, T; Vogel, V; Von Walter, G; Wanzenberg, R; Weiland, T; Weise, H; Weisend, J G; Wendt, M; Werner, M; White, M M; Will, I; Wolff, S; Yurkov, M V; Zapfe, K; Zhogolev, P; Zhou, F

    2000-01-01T23:59:59.000Z

    We present the first observation of Self-Amplified Spontaneous Emission (SASE) in a free-electron laser (FEL) in the Vacuum Ultraviolet regime at 109 nm wavelength (11 eV). The observed free-electron laser gain (approx. 3000) and the radiation characteristics, such as dependency on bunch charge, angular distribution, spectral width and intensity fluctuations all corroborate the existing models for SASE FELs.

  1. Full Stokes observations in the He I 1083 nm spectral region covering an M3.2 flare

    E-Print Network [OSTI]

    Kuckein, C; Sainz, R Manso; Ramos, A Asensio

    2015-01-01T23:59:59.000Z

    We present an exceptional data set acquired with the Vacuum Tower Telescope (Tenerife, Spain) covering the pre-flare, flare, and post-flare stages of an M3.2 flare. The full Stokes spectropolarimetric observations were recorded with the Tenerife Infrared Polarimeter in the He I 1083.0 nm spectral region. The object under study was active region NOAA 11748 on 2013 May 17. During the flare the chomospheric He I 1083.0 nm intensity goes strongly into emission. However, the nearby photospheric Si I 1082.7 nm spectral line profile only gets shallower and stays in absorption. Linear polarization (Stokes Q and U) is detected in all lines of the He I triplet during the flare. Moreover, the circular polarization (Stokes V) is dominant during the flare, being the blue component of the He I triplet much stronger than the red component, and both are stronger than the Si I Stokes V profile. The Si I inversions reveal enormous changes of the photospheric magnetic field during the flare. Before the flare magnetic field conc...

  2. High-average-power, 100-Hz-repetition-rate, tabletop soft-x-ray lasers at sub-15-nm wavelengths

    SciTech Connect (OSTI)

    Reagan, Brendon [Colorado State University, Fort Collins] [Colorado State University, Fort Collins; Berrill, Mark A [ORNL] [ORNL; Wernsing, Keith [Colorado State University, Fort Collins] [Colorado State University, Fort Collins; Baumgarten, Cory [Colorado State University, Fort Collins] [Colorado State University, Fort Collins; Woolston, Mark [Colorado State University, Fort Collins] [Colorado State University, Fort Collins; Rocca, Jorge [Colorado State University, Fort Collins] [Colorado State University, Fort Collins

    2014-01-01T23:59:59.000Z

    Efficient excitation of dense plasma columns at 100-Hz repetition rate using a tailored pump pulse profile produced a tabletop soft-x-ray laser average power of 0.1 mW at = 13.9 nm and 20 W at = 11.9 nm from transitions of Ni-like Ag and Ni-like Sn, respectively. Lasing on several other transitions with wavelengths between 10.9 and 14.7 nm was also obtained using 0.9-J pump pulses of 5-ps duration from a compact diode-pumped chirped pulse amplification Yb:YAG laser. Hydrodynamic and atomic plasma simulations show that the pump pulse profile, consisting of a nanosecond ramp followed by two peaks of picosecond duration, creates a plasma with an increased density of Ni-like ions at the time of peak temperature that results in a larger gain coefficient over a temporally and spatially enlarged space leading to a threefold increase in the soft-x-ray laser output pulse energy. The high average power of these compact soft-x-ray lasers will enable applications requiring high photon flux. These results open the path to milliwatt-average-power tabletop soft-x-ray lasers.

  3. Fast Flux Test Facility Asbestos Location Tracking Program

    SciTech Connect (OSTI)

    REYNOLDS, J.A.

    1999-04-13T23:59:59.000Z

    Procedure Number HNF-PRO-408, revision 0, paragraph 1.0, ''Purpose,'' and paragraph 2.0, ''Requirements for Facility Management of Asbestos,'' relate building inspection and requirements for documentation of existing asbestos-containing building material (ACBM) per each building assessment. This documentation shall be available to all personnel (including contractor personnel) entering the facility at their request. Corrective action was required by 400 Area Integrated Annual Appraisal/Audit for Fiscal Year 1992 (IAA-92-0007) to provide this notification documentation. No formal method had been developed to communicate the location and nature of ACBM to maintenance personnel in the Fast Flux Test Facility (FFTF) 400 Area. The scope of this Data Package Document is to locate and evaluate any ACBM found at FFTF which constitutes a baseline. This includes all buildings within the protected area. These findings are compiled from earlier reports, numerous work packages and engineering evaluations of employee findings.

  4. Mapping the location and configuration of nitrogen in diamond nanoparticles.

    SciTech Connect (OSTI)

    Barnard, A. S.; Sternberg, M.; Center for Nanoscale Materials; Univ. of Oxford

    2007-01-17T23:59:59.000Z

    Understanding how impurities such as nitrogen are included in diamond nanoparticles is expected to be important for use in future nanodevices, such as qubits for quantum computing. Most commercial diamond nanoparticles contain approximately 2-3% nitrogen, but it is difficult to determine experimentally whether it is located within the core or at the surface of the nanoparticles. Presented here are density functional tight-binding simulations examining the configuration and potential energy surface of substitutional nitrogen in diamond nanoparticles, directly comparing results of different sizes, shapes and surface chemistry. The results predict that nitrogen is metastable within the core of both hydrogenated and dehydrogenated particles, but that the binding energy, coordination and preferred location is dependent upon the structure of the nanoparticle as a whole.

  5. Helicopter Surveys for Locating Wells and Leaking Oilfield Infrastructure

    SciTech Connect (OSTI)

    Hammack, R.W.; Veloski, G.A.; Hodges, G. (Fugro Airborne Surveys)

    2006-10-01T23:59:59.000Z

    Prior to the injection of CO2 into geological formations, either for enhanced oil recovery or for CO2 sequestration, it is necessary to locate wells that perforate the target formation and are within the radius of influence for planned injection wells. Locating and plugging wells is necessary because improperly plugged well bores provide the most rapid route for CO2 escape to the surface. This paper describes the implementation and evaluation of helicopter and ground-based well detection strategies at a 100+ year old oilfield in Wyoming where a CO2 flood is planned. This project was jointly funded by the U.S. Department of Energys National Energy Technology Laboratory and Fugro Airborne Surveys

  6. Determining Mountaintop Mining Locations in West Virginia Using Elevation Datasets

    E-Print Network [OSTI]

    Rowland, Danny

    2009-11-18T23:59:59.000Z

    Determining Mountaintop Mining Locations in West Virginia Using Elevation Datasets Danny Rowland Haskell Indian Nations University Image from: http://www.colorado.edu/geography/cartpro/cartography2/spring2006/syphers.../projects/westvirginia/whatis.htm Image from: http://washingtonindependent.com/49008/congress-takes-on-mountaintop-mining Mountaintop Mining Operation 2 Elevation datasets: NED & SRTM West Virginia NED SRTM Elevation Change Over ~30 Year Period 20021970s SRTM Subtracted from...

  7. Locating Pleistocene refugia: Comparing phylogeographic and ecological niche model predictions

    E-Print Network [OSTI]

    Waltari, Eric; Hijmans, Robert J.; Peterson, A. Townsend; Nyá ri, Á rpá d S.; Perkins, Susan L.; Guralnick, Robert P.

    2007-07-11T23:59:59.000Z

    , American Museum of Natural History, New York, New York, United States of America, 2 International Rice Research Institute, Los Banos, Laguna, Philippines, 3Natural History Museum & Biodiversity Research Center, University of Kansas, Lawrence, Kansas.... Refugia identified in phylogeographic studies are shown as black outlines. Areas predicted to be refugia are in green, areas not predicted are in gray, and hatching indicates approximate locations of ice sheets [68]. Gray lines indicate present day...

  8. Location Prediction in Social Media Based on Tie Strength

    E-Print Network [OSTI]

    McGee, Jeffrey A

    2013-04-29T23:59:59.000Z

    used in this paper. Alberto adds location information to his tweets. Beryl is a reciprocal friend of Alberto, Chris is just a friend since Alberto follows Chris, Debby is just a follower, and Ernesto is just mentioned. The line to Ernesto is dashed... to show that there is no friend/follow relationship between Alberto and Ernesto. The other arrows show who follows whom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.2 Cumulative distribution function(CDF) of the distance...

  9. The application of satellite time references to HVDC fault location

    SciTech Connect (OSTI)

    Dewe, M.B.; Sankar, S.; Arrillaga, J. (Univ. of Canterbury, Christchurch (New Zealand))

    1993-07-01T23:59:59.000Z

    An HVdc fault location scheme is described which relies on very precise detection of the time of arrival of fault created surges at both ends of the line. Such detection is achieved by a very accurate data acquisition and processing system combined with the time reference signals provided by a global positioning system receiver. Extensive digital simulation is carried out to determine the voltage and current waveforms, to identify the main sources of error and suggest possible compensation techniques.

  10. Locating PHEV exchange stations in V2G

    SciTech Connect (OSTI)

    Pan, Feng [Los Alamos National Laboratory; Bent, Russell [Los Alamos National Laboratory; Berscheid, Alan [Los Alamos National Laboratory; Izraelevitz, David [Los Alamos National Laboratory

    2010-01-01T23:59:59.000Z

    Plug-in hybrid electric vehicle (PREV) is an environment friendly modem transportation method and has been rapidly penetrate the transportation system. Renewable energy is another contributor to clean power but the associated intermittence increases the uncertainty in power generation. As a foreseen benefit of a vchicle-to-grid (V2G) system, PREV supporting infrastructures like battery exchange stations can provide battery service to PREV customers as well as being plugged into a power grid as energy sources and stabilizer. The locations of exchange stations are important for these two objectives under constraints from both ,transportation system and power grid. To model this location problem and to understand and analyze the benefit of a V2G system, we develop a two-stage stochastic program to optimally locate the stations prior to the realizations of battery demands, loads, and generation capacity of renewable power sources. Based on this model, we use two data sets to construct the V2G systems and test the benefit and the performance of these systems.

  11. Crystal field analysis of Pm$^{3+}$ (4$^{f4}) and Sm$^{3+}$ (4$^{f5}) and lattice location studies of $^{147}$Nd and $^{147}$Pm in w-AlN

    E-Print Network [OSTI]

    Vetter, Ulrich; Nijjar, Anmol S; Zandi, Bahram; hl, Gregor; Wahl, Ulrich; De Vries, Bart; Hofsss, Hans; Dietrich, Marc

    2006-01-01T23:59:59.000Z

    We report a detailed crystal field analysis of Pm3+ and Sm3+ as well as lattice location studies of 147Pm and 147Nd in 2H-aluminum nitride (w-AlN). The isotopes of mass 147 were produced by nuclear fission and implanted at an energy of 60 keV. The decay chain of interest in this work is 147Nd?147Pm?147Sm (stable). Lattice location studies applying the emission channeling technique were carried out using the ?? particles and conversion electrons emitted in the radioactive decay of 147Nd?147Pm. The samples were investigated as implanted, and also they were investigated after annealing to temperatures of 873 K as well as 1373 K. The main fraction of about 60% of both 147Pm as well as 147Nd atoms was located on substitutional Al sites in the AlN lattice; the remainder of the ions were located randomly within the AlN lattice. Following radioactive decay of 147Nd, the cathodoluminescence spectra of Pm3+ and Sm3+ were obtained between 500 nm and 1050 nm at sample temperatures between 12 K and 300 K. High-re...

  12. formation of the main deposit. At lower current densities, it is possible to deposit only this extremely thin tin film: it is 5 nm thick

    E-Print Network [OSTI]

    Stocker, Thomas

    . Whereas the 200-nm copper and 300-nm tin films in Fig. 4 have a thickness close to that predicted. We propose the following mechan- istic explanation of this effect. First, in thin cells problems of Li rechargeable batteries. Indeed, cycling efficiency of Li batteries is drastically reduced

  13. Abuse Tolerance Improvement

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    D. H. Johnson, 75 th Battery Safety Mtg., Feb. 21-22, 2007, Albuquerque, NM - Li-Ion Batteries: Safety and Abuse Tolerance Issues, E. P. Roth, MITIndustry Consortium on...

  14. Sandia National Laboratories: Two Sandia Engineers named as Influencer...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Innovators of Wind Power On May 26, 2011, in Energy, News, Renewable Energy, Wind Energy ALBUQUERQUE, N.M. - April 28, 2011 - Sandia engineers Jose Zayas and Dale Berg...

  15. jkpc171.tmp

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Management, May - June 1986; Greher and Olsen, ibid. 53. SNL Archives, interview, Leonard Jacobvitz, Albuquerque, NM, 1 October 1985. 54. Contract DE-AC04-76 DPO0789, ( 1983)...

  16. Journal of Neuroscience Methods 139 (2004) 1324 3D-catFISH: a system for automated quantitative three-dimensional

    E-Print Network [OSTI]

    Lin, Gang

    2004-01-01T23:59:59.000Z

    , University of New Mexico, Albuquerque, NM 87131, USA Received 29 January 2004; received in revised form 9-invasive functional imaging studies (e.g., PET, fMRI) that can dissociate regions of differential activation

  17. Blind Source Separation of Neuromagnetic Responses

    E-Print Network [OSTI]

    Pearlmutter, Barak

    of New Mexico, Albuquerque, NM 87131 Abstract Magnetoencephalography (MEG) is a functional brain imaging resolution of MEG compared to fMRI and PET (milliseconds vs. seconds and tens of seconds) makes it ideal

  18. Supercomputing Challenge

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3rd New Mexico Supercomputing Challenge April 23, 2013 Clustering algorithms to find correlations, "meaningful" words, topics LOS ALAMOS, N.M., April 23, 2013-A trio of Albuquerque...

  19. Sandia National Laboratories: DOE Awards Wind Research Grants

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Wind DOE Awards Wind Research Grants On May 18, 2011, in Energy, News, Renewable Energy, Wind Energy singlepic id633 w320 h240 floatrightALBUQUERQUE, N.M. - The Wind Energy...

  20. 1248 IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING, VOL. 47, NO. 9, SEPTEMBER 2000 Paired MEG Data Set Source Localization Using

    E-Print Network [OSTI]

    Leahy, Richard M.

    . Huang is with the University of New Mexico, Albuquerque, NM 87131 USA (e-mail: mhuang@UNM.Edu). *R. M-9294(00)08014-9. (PET) and functional magnetic resonance imaging (fMRI) acti- vation studies, differences between