Powered by Deep Web Technologies
Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

INTO Colorado State University, Academic Advisor: Short Description Position Description  

E-Print Network [OSTI]

INTO Colorado State University, Academic Advisor: Short Description Position Description INTO Colorado State University (INTO CSU) seeks one full-time, 12-month academic advisor who will advise INTO CSU students. The primary responsibility of the academic advisor is to promote and facilitate

Stephens, Graeme L.

2

A STATE VARIABLE DESCRIPTION OF THE RHIC RF CONTROL LOOPS.  

SciTech Connect (OSTI)

The beam transfer function changes during the RHIC ramp. The response of the RF control loops changes as a result. A state-variable description of the beam and the RF control loops was developed. This description was used to generate a set of feedback matrices that keeps the response of the RF control loops constant during the ramp. This paper describes the state-variable description and its use in determining the K matrices.

SCHULTHEISS,C.; BRENNAN,J.M.

2002-06-02T23:59:59.000Z

3

Nanotechnology enterprise in the United States: structure and location.  

E-Print Network [OSTI]

??This thesis investigates the structure and location of the nanotechnology enterprise in the United States. Nanotechnology merits focus because of the high degree of innovative… (more)

Bhaskarabhatla, Ajay Sivaram

2006-01-01T23:59:59.000Z

4

Project Project Funding Operational & Maintenance Costs Univ. Project Title GSF Brief Description of Project Location Amount Source  

E-Print Network [OSTI]

Estimated Annual Amount For Amount Source STATE UNIVERSITY SYSTEM 2012-2013 Fixed Capital Outlay ProjectsProject Project Funding Operational & Maintenance Costs Univ. Project Title GSF Brief Description that will respond to the latest trends in small-group learning, technology resources, and collaboration spaces

Slatton, Clint

5

Field descriptions for a developing laminar tube flow with and without a concentrically located spherical obstacle  

E-Print Network [OSTI]

By Br" r Br" By (6) B'w 1 Bw Bgw Bn . Bw . Bw += ?. += ? . = Re (u ?. + w=) BrB r" Br By2 By r Br By (7) The nonlinear equations (6) and (7) are second order in the nondimensional radial and axial velocity, respectively, and require eight boundary... Approved as to style and content by: (C airman f Commit tee) (Co-Chairman of Committee) A Q' (Head of Dep rtment) P -, qg/, . 7 (Member) (M er) /7 Z~t j&dgc- December 1972 ABSTRACT Field Descriptions for a Developing Laminar Tube Flow...

Mikkelsen, Clark Douglas

2012-06-07T23:59:59.000Z

6

National Ignition Facility and Managing Location, Component, and State  

SciTech Connect (OSTI)

The National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory is a stadium-sized facility that contains a 192-beam, 1.8-Megajoule, 500-Terawatt, ultraviolet laser system coupled with a 10-meter diameter target chamber. There are over 6,200 Line Replaceable Units (LRUs) comprised of more than 104,000 serialized parts that make up the NIF. Each LRU is a modular unit typically composed of a mechanical housing, laser optics (glass, lenses, or mirrors), and utilities. To date, there are more than 120,000 data sets created to characterize the attributes of these parts. Greater than 51,000 Work Permits have been issued to install, maintain, and troubleshoot the components. One integrated system is used to manage these data, and more. The Location Component and State (LoCoS) system is a web application built using Java Enterprise Edition technologies and is accessed by over 1,200 users. It is either directly or indirectly involved with each aspect of NIF work activity, and interfaces with ten external systems including the Integrated Computer Control System (ICCS) and the Laser Performance Operations Model (LPOM). Besides providing business functionality, LoCoS also acts as the NIF enterprise service bus. In this role, numerous integration approaches had to be adopted including: file exchange, database sharing, queuing, and web services in order to accommodate various business, technical, and security requirements. Architecture and implementation decisions are discussed.

Foxworthy, C; Fung, T; Beeler, R; Li, J; Dugorepec, J; Chang, C

2011-07-25T23:59:59.000Z

7

Description  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phasesData FilesShape, Density, and Morphologyusing TD-DFT. |Description

8

State of the art analysis of online fault location on AC cables in underground transmission systems  

E-Print Network [OSTI]

on transmission level fault location methods have been focused on overhead lines. Because of the very different- termine the fault location. Because only one end meas- urements are used, the algorithm is derived usingState of the art analysis of online fault location on AC cables in underground transmission systems

Bak, Claus Leth

9

PSI # Date Time Location Incident Description Disposition 4341 9/2/2011 8:00 Blue Ridge Bicycle Theft Norco Mountain bike BPD notified  

E-Print Network [OSTI]

PSI # Date Time Location Incident Description Disposition 4341 9/2/2011 8:00 Blue Ridge Bicycle Four or more citations received Fine issued 4353 9/8/2011 16:00 Elizabeth Rogers Bicycle Theft Bluish Green bicycle BPD notified 4354 9/9/2011 13:49 Short St Hair Salon Criminal Damage Graffiti on the rear

Baltisberger, Jay H.

10

HILLTOP CHILD DEVELOPMENT CENTER Program Description: Hilltop is a private non-profit child care program located on the  

E-Print Network [OSTI]

HILLTOP CHILD DEVELOPMENT CENTER Program Description: Hilltop is a private non-profit child care Department of Health and Environment if hired. Hilltop is an equal opportunity affirmative action employer

11

HQ State HQ City Primary Awardee Brief Project Description Project Locations  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietip sheetK-4In 2013 many autoThis road map is aHOW THEHQ

12

The Department of Geology at Wayne State University is located in a urban environmental set-  

E-Print Network [OSTI]

of geological resources, geological hazards and environmental pollution. The curriculum includes courses fromThe Department of Geology at Wayne State University is located in a urban environmental set- ting (Structural Geology). The Geology Department is housed in the historic and newly renovated Old Main Building

Baskaran, Mark

13

Department ID Conversion Chart -Boise State University -Revised 7/01 NEW Dept. ID OLD Dept. ID Description  

E-Print Network [OSTI]

Department ID Conversion Chart - Boise State University - Revised 7/01 NEW Dept. ID OLD Dept. ID;Department ID Conversion Chart - Boise State University - Revised 7/01 NEW Dept. ID OLD Dept. ID Description - Cheatgrss 006G106041 00066041 Stat Analysis Grn Strip Mod #9 006G106044 00066044 Threats To Collared Lizards

Barrash, Warren

14

The Montana University System Water Center, located at Montana State University-Bozeman, was established by a  

E-Print Network [OSTI]

The Montana University System Water Center, located at Montana State University to resolve the state's water problems. It does this by sponsoring water-related research, providing training Development program, so that Montana water professionals can acquire specialized training within the state

Maxwell, Bruce D.

15

Center for Energy Sustainability The San Diego State University Center for Energy Sustainability, located in the heart of  

E-Print Network [OSTI]

1 Center for Energy Sustainability Mission The San Diego State University Center for Energy Sustainability, located in the heart of California's Imperial Valley, America's epicenter, and to seize this opportunity, we are establishing the Center for Energy Sustainability (CES) on SDSU's Brawley

Ponce, V. Miguel

16

Building Content Owned Bldg # Account No. Building/Property Name Location City Value Value by State Year Built Sq Ft  

E-Print Network [OSTI]

Building Content Owned Bldg # Account No. Building/Property Name Location City Value Value by State 48 3027 25-26-GC284-000 AGY GIN BUILDING SNOWS MILL RD WATKINSVILLE 12500 0 Y 1960 8300 3028 25-26-GC

Arnold, Jonathan

17

Exciton Bose condensation : the ground state of an electron-hole gas I. Mean field description of a simplified model  

E-Print Network [OSTI]

1069 Exciton Bose condensation : the ground state of an electron-hole gas I. Mean field description dégénérées. Nous étudions la condensation de Bose de ce système en fonction de la densité, négligeant dans-hole gas in a simple model semiconductor, with direct gap and isotropic, non degenerate bands. We study

Boyer, Edmond

18

Pseudomodes as an effective description of memory: Non-Markovian dynamics of two-state systems in structured reservoirs  

E-Print Network [OSTI]

We investigate the non-Markovian dynamics of two-state systems in structured reservoirs. We establish a connection between two theoretical quantum approaches, the pseudomodes [B. M. Garraway, Phys. Rev. A 55, 2290 (1997)] and the recently developed non-Markovian quantum jump method [J. Piilo et al., Phys. Rev. Lett. 100, 180402 (2008)]. This connection provides a clear physical picture of how the structured reservoir affects the system dynamics, indicating the role of the pseudomodes as an effective description of the environmental memory.

L. Mazzola; S. Maniscalco; J. Piilo; K. -A. Suominen; B. Garraway

2009-11-23T23:59:59.000Z

19

Central-moment description of polarization for quantum states of light  

E-Print Network [OSTI]

We present a moment expansion method for the systematic characterization of the polarization properties of quantum states of light. Specifically, we link the method to the measurements of the Stokes operator in different directions on the Poincar\\'{e} sphere, and provide a method of polarization tomography without resorting to full state tomography. We apply these ideas to the experimental first- and second-order polarization characterization of some two-photon quantum states. In addition, we show that there are classes of states whose polarization characteristics are dominated not by their first-order moments (i.e., the Stokes vector) but by higher-order polarization moments.

G. Björk; J. Söderholm; Y. -S. Kim; Y. -S. Ra; H. -T. Lim; C. Kothe; Y. -H. Kim; L. L. Sánchez-Soto; A. B. Klimov

2012-01-19T23:59:59.000Z

20

Wind Turbine Manufacturers in the United States: Locations and Local Impacts (Presentation)  

SciTech Connect (OSTI)

Suzanne Tegen's presentation about U.S. wind energy manufacturing (presented at WINDPOWER 2010 in Dallas) provides information about challenges to modeling renewables; wind energy's economic "ripple effect"; case studies about wind-related manufacturing in Colorado, Iowa, Ohio, and Indiana; manufacturing maps for the Great Lakes region, Arkansas, and the United States; sample job announcements; and U.S. Treasury Grant 1603 funding.

Tegen, S.

2010-05-26T23:59:59.000Z

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Coupling of actin hydrolysis and polymerization: Reduced description with two nucleotide states  

E-Print Network [OSTI]

The polymerization of actin filaments is coupled to the hydrolysis of adenosine triphosphate (ATP), which involves both the cleavage of ATP and the release of inorganic phosphate. We describe hydrolysis by a reduced two-state model with a cooperative cleavage mechanism, where the cleavage rate depends on the state of the neighboring actin protomer in a filament. We obtain theoretical predictions of experimentally accessible steady state quantities such as the size of the ATP-actin cap, the size distribution of ATP-actin islands, and the cleavage flux for cooperative cleavage mechanisms.

Xin Li; Reinhard Lipowsky; Jan Kierfeld

2011-02-10T23:59:59.000Z

22

Course Descriptions Page 311Sonoma State University 2008-2010 Catalog Engineering Science (ES)  

E-Print Network [OSTI]

-flops, registers, and counters, sequential circuits and state machines. Various logic families and comparison-phase circuits, Y-Delta equivalents. Multi-port networks, two-port networks with energy storage, and ideal, operational amplifiers, single and multistage amplifiers; modeling and simulation using spice

Ravikumar, B.

23

ECE 331 Electromechanical Energy Conversion Catalog Description: Energy conversion principles for electric motors. Steady-state  

E-Print Network [OSTI]

. Introduction to drives and power electronics in control of electric machines, including switch-mode PWM (ABET Outcomes A, C, E, j, k) Learning Resources: Electric Machines and Drives: A First Course, Ned for electric motors. Steady-state characteristics and analysis of induction, synchronous and direct current

24

Course Descriptions Page 303Sonoma State University 2008-2010 Catalog Education: Leadership (EDEL)  

E-Print Network [OSTI]

) This course is designed as the culminating course in the Preliminary Administra- tive Services Credential is the introductory course for the Sonoma State University Preliminary Administrative Services Credential program. Grade only. Prerequisites: Admission to the Preliminary Administra- tive Services Credential Program

Ravikumar, B.

25

INVENTORY AND DESCRIPTION OF COMMERCIAL REACTOR FUELS WITHIN THE UNITED STATES  

SciTech Connect (OSTI)

There are currently 104 nuclear reactors in 31 states, operated by 51 different utilities. Operation of these reactors generates used fuel assemblies that require storage prior to final disposition. The regulatory framework within the United States (U.S.) allows for the licensing of used nuclear fuel storage facilities for an initial licensing period of up to 40 years with potential for license extensions in 40 years increments. Extended storage, for periods of up to 300 years, is being considered within the U.S. Therefore, there is an emerging need to develop the technical bases to support the licensing for long-term storage. In support of the Research and Development (R&D) activities required to support the technical bases, a comprehensive assessment of the current inventory of used nuclear fuel based upon publicly available resources has been completed that includes the most current projections of used fuel discharges from operating reactors. Negotiations with the nuclear power industry are ongoing concerning the willingness of individual utilities to provide information and material needed to complete the R&D activities required to develop the technical bases for used fuel storage for up to 300 years. This report includes a status of negotiations between DOE and industry in these regards. These negotiations are expected to result in a framework for cooperation between the Department and industry in which industry will provide and specific information on used fuel inventory and the Department will compensate industry for the material required for Research and Development and Testing and Evaluation Facility activities.

Vinson, D.

2011-03-31T23:59:59.000Z

26

Location and valence state of strontium cations on the framework of a carbon dioxide selective porous silicoaluminophosphate  

SciTech Connect (OSTI)

A Sr{sup 2+}-SAPO-34 material that displays superior CO2 adsorption selectivity and capacity was characterized via XPS and UV-vis spectroscopy to elucidate the valence state of strontium cations and framework silicon environment. Most importantly, the location of the strontium has been estimated from a Rietveld refinement analysis of synchrotron diffraction data. The XPS analysis indicated that the apparent valence state of the strontium is less than 2, an indication of its interaction with the large anionic framework. Furthermore, UV-vis tests pointed to changes in the silicon environment, plausibly related to this valence state or framework faulting. For the refinement, the analysis found that strontium occupied two unique sites: a site Sr1 slightly displaced from six-membered rings and a site Sr2 positioned at the top or bottom of the eight-membered rings. The latter position favors the interaction of the alkaline earth metal with CO{sub 2}, probably resulting in an enhanced electric field-quadrupole moment interaction.

Zhang, Li; Rivera-Ramos, Milton E.; Hernández-Maldonado, Arturo J. (Puerto Rico) [Puerto Rico

2014-05-28T23:59:59.000Z

27

Location Student Fac/Staff Disabled Special OLLI Reserved Electric Carpool Park and Pay 30 Minute Loading Maint/Service State Vehicle Motorcycle Control* S / L** P / T / LD*** Location Total Alumni House 1 1 17 D L P 19  

E-Print Network [OSTI]

Loading Maint/Service State Vehicle Motorcycle Control* S / L** P / T / LD*** Location Total Alumni House = Surface Lot *** P = Permanent, T = Temporary, LD = Leased Structure 5,631 Motorcycle space count is not included in "Total Spaces" count and is an es mate of how many motorcycles can park in each area Surface

de Lijser, Peter

28

Complete kinetic isotope effect description of transition states for acid-catalyzed hydrolyses of methyl. cap alpha. - and. beta. -glucopyranosides  

SciTech Connect (OSTI)

The following kinetic isotope effects (k/sub light//k/sub heavy/) have been measured by the isotopic quasi-racemate method for the hydrolyses of methyl ..cap alpha..- and ..beta..-glucopyranosides, respectively in 2.0 M HClO/sub 4/ at 80/sup 0/C (..cap alpha..-D 1.137 +/- 0.007, 1.089 +/- 0.006; ..beta..-D 1.073 +/- 0.003, 1.045 +/- 0.004; ..gamma..-D (C5) 0.987 +/- 0.002, 0.971 +/- 0.003; leaving group d/sub 3/ 1.006 +/- 0.001, 1.015 +/- 0.002; leaving group /sup 18/O 1.026 +/- 0.001, 1.024 +/ +/- 0.002; anomeric /sup 13/C 1.007 +/- 0.001, 1.011 +/- 0.002). In conjunction with studies of the effect of added solutes on the rates of hydrolysis of various aldopyranosyl derivatives, which indicate such reactions are truly unimolecular, and model ring /sup 18/O and ..beta..-deuterium effects, it is possible to locate the dihedral angles about the O5-C1 and C1-C2 bonds at the transition state using these data. If the dihedral angles so derived are used as constraints in calculations using N.L. Allinger's MM2 molecular mechanics program, transition-state structures are obtained. The geometry of these transition states stands in contradiction to the theory of stereoelectronic control.

Bennet, A.J.; Sinnott, M.L.

1986-11-12T23:59:59.000Z

29

Course Descriptions Page 317Sonoma State University 2008-2010 Catalog enSp 307 enVirOnMentAl hiStOry (4)  

E-Print Network [OSTI]

. Course addresses general plans, zoning, growth management, environmental impact assessment, and the localCourse Descriptions Page 317Sonoma State University 2008-2010 Catalog enSp 307 enVirOnMentAl hi perceived, used, managed, and conserved it from Colonial times to the present. Changes in attitudes

Ravikumar, B.

30

Title, Location, Document Number Estimated Cost Description  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of EnergyThe EnergyDepartment7 th , 2007Timothy RunyonTitle

31

Date Time Event Description/Participants Location  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region service area. The Desert Southwest Region is one ofUpdated: 04/29/2015

32

YUCCA MOUNTAIN SITE DESCRIPTION  

SciTech Connect (OSTI)

The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

A.M. Simmons

2004-04-16T23:59:59.000Z

33

Student Ambassador Job description  

E-Print Network [OSTI]

Blue 1 Student Ambassador Job description Department: Student Administration and Registry Location: Varies - as advised by the UK Student Recruitment and Outreach Team Job title: Student Ambassador Responsible to: UK Student Recruitment and Outreach Team Payment and benefits: £6.42 per hour Duration

Anderson, Jim

34

On-line Chemistry within WRF: Description and Evaluation of a State-of-the-Art Multiscale Air Quality and Weather Prediction Model  

SciTech Connect (OSTI)

This is a conference proceeding that is now being put together as a book. This is chapter 2 of the book: "INTEGRATED SYSTEMS OF MESO-METEOROLOGICAL AND CHEMICAL TRANSPORT MODELS" published by Springer. The chapter title is "On-line Chemistry within WRF: Description and Evaluation of a State-of-the-Art Multiscale Air Quality and Weather Prediction Model." The original conference was the COST-728/NetFAM workshop on Integrated systems of meso-meteorological and chemical transport models, Danish Meteorological Institute, Copenhagen, May 21-23, 2007.

Grell, Georg; Fast, Jerome D.; Gustafson, William I.; Peckham, Steven E.; McKeen, Stuart A.; Salzmann, Marc; Freitas, Saulo

2010-01-01T23:59:59.000Z

35

The Chornobyl accident revisited, Part II: The state of the nuclear fuel located within the Chornobyl sarcophagus  

SciTech Connect (OSTI)

Approximately 135 tonnes of the 190.3-tonne initial core fuel load ({approx}71%) at Chernobyl Unit 4 melted and flowed into the lower regions of the reactor building to form various kinds of the now-solidified lava-like fuel-containing materials (LFCMs) or corium. The results of radiochemical analyses reveal that only 5% of the LFCM inventory of Ru-106 remains. whereas, surprisingly, 35% of the LFCM inventory of Cs-137 remains. Moreover, the results of these analyses support the fact that little if any of the 5020 tonnes of various materials (dropped from helicopters during the active phase of the accident in an attempt to smother the burning graphite) ever made it into the core shaft, where the bulk of the core was located. The results appear to support earlier Western source-term estimates that significantly more volatile radionuclides may have been released as a result of the accident. 37 refs., 13 figs., 7 tabs.

Borovoi, A.A. [Ukrainian Academy of Sciences, Kyyiv (Ukraine)]|[Kurchatov Russian Research Inst., Moscow (Russian Federation); Sich, A.R. [Massachusetts Inst. of Technology, Boston, MA (United States)

1995-01-01T23:59:59.000Z

36

Tidal Waves -- a non-adiabatic microscopic description of the yrast states in near-spherical nuclei  

E-Print Network [OSTI]

The yrast states of nuclei that are spherical or weakly deformed in their ground states are described as quadrupole waves running over the nuclear surface, which we call "tidal waves". The energies and E2 transition probabilities of the yrast states in nuclides with $Z$= 44, 46, 48 and $N=56, ~58,..., 66$ are calculated by means of the cranking model in a microscopic way. The nonlinear response of the nucleonic orbitals results in a strong coupling between shape and single particle degrees of freedom.

S. Frauendorf; Y. Gu; J. Sun

2011-09-08T23:59:59.000Z

37

Modeling Excited States in TiO2 Nanoparticles: On the Accuracy of a TD-DFT Based Description  

SciTech Connect (OSTI)

We have investigated the suitability of Time-Dependent Density Functional Theory (TD-DFT) to describe vertical low-energy excitations in naked and hydrated titanium dioxide nanoparticles through a comparison with results from Equation-of-Motion Coupled Cluster (EOM-CC) quantum chemistry methods. We demonstrate that for most TiO2 nanoparticles TD-DFT calculations with commonly used exchange-correlation (XC-)potentials (e.g. B3LYP) and EOM-CC methods give qualitatively similar results. Importantly, however, we also show that for an important subset of structures, TD-DFT gives qualitatively different results depending upon the XC-potential used and that in this case only TD-CAM-B3LYP and TD-BHLYP calculations yield results that are consistent with those obtained using EOM-CC theory. Moreover, we demonstrate that the discrepancies for such structures arise from a particular combination of defects, excitations involving which are charge-transfer excitations and hence are poorly described by XC-potentials that contain no or low fractions of Hartree-Fock like exchange. Finally, we discuss that such defects are readily healed in the presence of ubiquitously present water and that as a result the description of vertical low-energy excitations for hydrated TiO2 nanoparticles is hence non-problematic.

Berardo, Enrico; Hu, Hanshi; Shevlin, S. A.; Woodley, Scott M.; Kowalski, Karol; Zwijnenburg, Martijn A.

2014-03-11T23:59:59.000Z

38

Description of TASHA: Thermal Analysis of Steady-State-Heat Transfer for the Advanced Neutron Source Reactor  

SciTech Connect (OSTI)

This document describes the code used to perform Thermal Analysis of Steady-State-Heat-Transfer for the Advanced Neutron Source (ANS) Reactor (TASHA). More specifically, the code is designed for thermal analysis of the fuel elements. The new code reflects changes to the High Flux Isotope Reactor steady-state thermal-hydraulics code. These changes were aimed at both improving the code`s predictive ability and allowing statistical thermal-hydraulic uncertainty analysis to be performed. A significant portion of the changes were aimed at improving the correlation package in the code. This involved incorporating more recent correlations for both single-phase flow and two-phase flow thermal limits, including the addition of correlations to predict the phenomenon of flow excursion. Since the code was to be used in the design of the ANS, changes were made to allow the code to predict limiting powers for a variety of thermal limits, including critical heat flux, flow excursion, incipient boiling, oxide spallation, maximum centerline temperature, and surface temperature equal to the saturation temperature. Statistical uncertainty analysis also required several changes to the code itself as well as changes to the code input format. This report describes these changes in enough detail to allow the reader to interpret code results and also to understand where the changes were made in the code programming. This report is not intended to be a stand alone report for running the code, however, and should be used in concert with the two previous reports published on the original code. Sample input and output files are also included to help accomplish these goals. In addition, a section is included that describes requirements for a new, more modem code that the project planned to develop.

Morris, D.G.; Chen, N.C.; Nelson, W.R.; Yoder, G.L.

1996-10-01T23:59:59.000Z

39

Advanced research and technoloty: University Coal Research Program. [Listed by state, organization and contract No. plus brief description  

SciTech Connect (OSTI)

In October 1979, Congress provided a new budget line item of $5 million for a program open to universities with existing laboratories capable of performing coal research. In response, the Department of Energy developed a national and regional program focused on university work in coal conversion and utilization. The program emphasizes coal combustion, conversion of coal to synthetic oil and gases, and characterization of coals from various regions of the country, and encourages the investigation and development of pertinent, promising, or novel ideas for advancing our knowledge of coal science. The program was announced to the academic community in December 1979, inviting more than 2000 departments of chemistry, chemical engineering, and mechanical engineering as well as academic vice-presidents for research, and university faculty to submit coal research proposals. By March 1980, more than 500 proposals had been received for consideration. By June 1980, after technical review of the proposals, 41 grants were awarded to 33 universities in 24 states. Each of these projects is described by means of a single-page summary that includes pertinent technical and fiscal information. The University Coal Research Program complements other DOE Fossil Energy activities with universities consisting of more than 400 active projects with an annual funding level of about $42 million. However, the new program differs in several respects: (1) it is performed through grants, rather than contracts or cooperative agreements, thereby offering investigators greater leeway in approaches to performance of their research objectives, (2) although mission oriented, it supports somewhat longer-term and more fundamental projects, and (3) it includes the training of students as an important objective.

Not Available

1980-08-01T23:59:59.000Z

40

Site Location of Development Act (Maine)  

Broader source: Energy.gov [DOE]

The Site Location of Development Act regulates the locations chosen for state, municipal, quasi-municipal, educational, charitable, commercial and industrial developments with respect to the...

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Electric current locator  

DOE Patents [OSTI]

The disclosure herein provides an apparatus for location of a quantity of current vectors in an electrical device, where the current vector has a known direction and a known relative magnitude to an input current supplied to the electrical device. Mathematical constants used in Biot-Savart superposition equations are determined for the electrical device, the orientation of the apparatus, and relative magnitude of the current vector and the input current, and the apparatus utilizes magnetic field sensors oriented to a sensing plane to provide current vector location based on the solution of the Biot-Savart superposition equations. Description of required orientations between the apparatus and the electrical device are disclosed and various methods of determining the mathematical constants are presented.

King, Paul E. (Corvallis, OR); Woodside, Charles Rigel (Corvallis, OR)

2012-02-07T23:59:59.000Z

42

Groundwater heat pumps: an examination of hydrogeologic, environmental, legal, and economic factors affecting their use. Volume II. Appendix D, state hydrogeologic descriptions and maps  

SciTech Connect (OSTI)

This appendix to the groundwater heat pump report contains hydrogeologic descriptions of the 48 conterminous US with data on ground water quality.

None

1980-11-01T23:59:59.000Z

43

Bitumen-bearing deposits of the United States  

SciTech Connect (OSTI)

Descriptions, resources, and petrophysical properties of bitumen-bearing rocks, or tar sands, in the United States are summarized by state and their locations indicated on the accompanying maps. One hundred ninety-eight identified deposits in 17 states yield a total bitumen resource estimated to be 57 billion barrels.

Crysdale, B.L.; Schenk, C.J.

1988-01-01T23:59:59.000Z

44

Implementing a time- and location-differentiated cap-and-trade program : flexible nitrogen oxide abatement from power plants in the eastern United States  

E-Print Network [OSTI]

Studies suggest that timing and location of emissions can change the amount of ozone formed from a given amount of nitrogen oxide (NOx) by a factor of five (Mauzerall et al. 2005). Yet existing NOx cap-and-trade programs ...

Martin, Katherine C

2007-01-01T23:59:59.000Z

45

Implementing a Time-and Location-Differentiated Cap-and-Trade Program: Flexible Nitrogen Oxide Abatement from Power Plants in the Eastern United States  

E-Print Network [OSTI]

Abatement from Power Plants in the Eastern United States by Katherine C. Martin B.A., Physics Reed College Oxide Abatement from Power Plants in the Eastern United States by Katherine C. Martin Submitted

de Weck, Olivier L.

46

Multiple description transform codes with an application to packetized speech  

E-Print Network [OSTI]

) and for 8 = 3. Comparison of the simulation and the theoretical results. 25 10 Multiple Description Transform Coder. Er, Ez, . . . , Et are ECMDSQ encoders for the transform coefficients, Dr, Dz, . . . , Dc are ECMDSQ decoders. 27 12 Slope A... of the location at which 21 lies). 7 11 10 12 13 15 16 17 21 14 18 20 22 26 19 23 25 27 31 24 28 29 30 32 33 34 Fig. 2. Example of index assignment, 2k + 1 = 5, As previously stated, the central encoder is described by a vector of thresholds (tp, tr...

Batllo, Jean-Christophe Claude

2012-06-07T23:59:59.000Z

47

Selecting the Content of Textual Descriptions of Geographically Located  

E-Print Network [OSTI]

Generation (NLG) techniques to generate textual summaries of spatio- temporal numerical weather prediction prediction (NWP) data generated by computer simulations of weather models. In the RoadSafe project NWP data for winter road maintenance application. Modern weather forecasting is largely guided by numerical weather

Reiter, Ehud

48

Blue Decal Parking Lots no. description grid location  

E-Print Network [OSTI]

.......................................K-7 20 803 S. Elizabeth ............................................H-4 21 North of Quigley Hall................................... M-5 88 Northeast of Quigley......................................N-3 113 North Side of Wall & Grand

49

STEP Intern Job Description  

Broader source: Energy.gov [DOE]

STEP Intern Job Description, from the Tool Kit Framework: Small Town University Energy Program (STEP).

50

Project Description: page 1 Project Description  

E-Print Network [OSTI]

Project Description: page 1 Project Description I. Introduction: Josephson junction networks Over the past 25 years, superconducting Josephson junctions have gradually become one of the major topics standards. Our research uses Josephson junctions as model systems for problems in nonlinear and neural

Segall, Ken

51

Student Groups Student Group Description Short Description  

E-Print Network [OSTI]

Student Groups Student Group Description Short Description AHR Scholar-Architecture Scholar ART Honors - Architecture Honors H04 Honors - Allied Medical Prof Honors H05 Honors - Arts & Sciences Honors H14 Honors - Envir&Natural Resources Honors H15 Honors - Food, Agr, & Envir Sci Honors H16 Honors

52

Mechanical Engineer Company Description  

E-Print Network [OSTI]

Mechanical Engineer Company Description Control Solutions Inc. is a small, dynamic, and rapidly. Position Description The Mechanical Engineer is responsible for all aspects associated with the mechanical enclosures, brackets, cabling assemblies among others. Systems include mechanisms, sensors, hydraulics, among

Kostic, Milivoje M.

53

Density functional theory for the description of spherical non-associating monomers in confined media using the SAFT-VR equation of state and weighted density approximations  

SciTech Connect (OSTI)

As a first step of an ongoing study of thermodynamic properties and adsorption of complex fluids in confined media, we present a new theoretical description for spherical monomers using the Statistical Associating Fluid Theory for potential of Variable Range (SAFT-VR) and a Non-Local Density Functional Theory (NLDFT) with Weighted Density Approximations (WDA). The well-known Modified Fundamental Measure Theory is used to describe the inhomogeneous hard-sphere contribution as a reference for the monomer and two WDA approaches are developed for the dispersive terms from the high-temperature Barker and Henderson perturbation expansion. The first approach extends the dispersive contributions using the scalar and vector weighted densities introduced in the Fundamental Measure Theory (FMT) and the second one uses a coarse-grained (CG) approach with a unique weighted density. To test the accuracy of this new NLDFT/SAFT-VR coupling, the two versions of the theoretical model are compared with Grand Canonical Monte Carlo (GCMC) molecular simulations using the same molecular model. Only the version with the “CG” approach for the dispersive terms provides results in excellent agreement with GCMC calculations in a wide range of conditions while the “FMT” extension version gives a good representation solely at low pressures. Hence, the “CG” version of the theoretical model is used to reproduce methane adsorption isotherms in a Carbon Molecular Sieve and compared with experimental data after a characterization of the material. The whole results show an excellent agreement between modeling and experiments. Thus, through a complete and consistent comparison both with molecular simulations and with experimental data, the NLDFT/SAFT-VR theory has been validated for the description of monomers.

Malheiro, Carine; Mendiboure, Bruno; Plantier, Frédéric; Miqueu, Christelle [Université Pau et Pays Adour, CNRS, TOTAL - UMR 5150 – LFC-R – Laboratoire des Fluides Complexes et leurs Réservoirs, BP 1155 – PAU, F-64013 (France)] [Université Pau et Pays Adour, CNRS, TOTAL - UMR 5150 – LFC-R – Laboratoire des Fluides Complexes et leurs Réservoirs, BP 1155 – PAU, F-64013 (France); Blas, Felipe J. [Departamento de Física Aplicada, and Centro de Física Teórica y Matemática FIMAT, Universidad de Huelva, 21071 Huelva (Spain)] [Departamento de Física Aplicada, and Centro de Física Teórica y Matemática FIMAT, Universidad de Huelva, 21071 Huelva (Spain)

2014-04-07T23:59:59.000Z

54

Library Locations Locations other than Main Library  

E-Print Network [OSTI]

Library Locations Locations other than Main Library Example: Feminist Studies HQ1410 .U54 2009 University of California, Santa Barbara Library www.library.ucsb.edu Updated 3-2014 A - B.......................................6 Central M - N..................................................Arts Library (Music Building) P

55

STANDARD OPERATING PROCEDURE Location(s): ___________________________________________________  

E-Print Network [OSTI]

of as hazardous waste. 8. Decontamination: Specific instructions: For light contamination of small areas or items12.1 STANDARD OPERATING PROCEDURE for PHENOL Location(s): ___________________________________________________ Chemical(s): Phenol Specific Hazards: May be fatal if inhaled. Harmful if absorbed through skin. Harmful

Pawlowski, Wojtek

56

EPA Clean Energy-Environment Guide to Action 3.2 State and Regional Energy Planning Policy Description and Objective Summary  

E-Print Network [OSTI]

Energy planning is, in its broadest sense, a strategic effort to develop energy-related goals and objectives and formulate related policies and programs. As the nexus for a variety of state concerns, energy planning can serve as an umbrella mechanism for simultaneously addressing energy, environmental, economic, and other issues. Energy planning can be undertaken at both a state and regional level. Many states have used their energy plans to support the development and use of cost-effective clean energy to help address multiple challenges including energy supply and reliability (including concerns with availability, independence, and security), energy prices, air quality and public health, and job development. Clean energy planning (as one aspect of energy planning)

unknown authors

57

GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION.  

SciTech Connect (OSTI)

THE DEPARTMENT OF ENERGY ORDER 5400.1, GENERAL ENVIRONMENTAL PROTECTION PROGRAM, REQUIRES THE DEVELOPMENT AND IMPLEMENTATION OF A GROUNDWATER PROTECTION PROGRAM. THE BNL GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION PROVIDES AN OVERVIEW OF HOW THE LABORATORY ENSURES THAT PLANS FOR GROUNDWATER PROTECTION, MONITORING, AND RESTORATION ARE FULLY DEFINED, INTEGRATED, AND MANAGED IN A COST EFFECTIVE MANNER THAT IS CONSISTENT WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

PAQUETTE,D.E.; BENNETT,D.B.; DORSCH,W.R.; GOODE,G.A.; LEE,R.J.; KLAUS,K.; HOWE,R.F.; GEIGER,K.

2002-05-31T23:59:59.000Z

58

DESCRIPTION OF ACCIDENT MSU DRIVERS SIGNATURE  

E-Print Network [OSTI]

DESCRIPTION OF ACCIDENT MSU DRIVERS SIGNATURE Signature 2-9-108, MCA (Statutory Coverage, in lieu-90-(4-20). CERTIFICATE OF INSURANCE X Weather Conditions: ACCIDENT INFORMATION Location: Date: - - 20 Time: : .M. Driver and Risk Management ~ 1160 Research Drive Bozeman, MT 59718 ~ (406) 994-2711 Accident Form #12;OTHER

Dyer, Bill

59

NASA Academy Program Descriptions  

E-Print Network [OSTI]

NASA Academy Program Descriptions October 2010 #12;NASA Academy Program Descriptions 2011 October 11, 2010 1/5 NASA Academy at ARC, GRC, GSFC, and MSFC Websites: Ames: http://academy.arc.nasa.gov Glenn: http://academy.grc.nasa.gov Goddard: http://academy.gsfc.nasa.gov Marshall: http://academy

Wang, Z. Jane

60

STATISTICAL DESCRIPTION OF THE  

E-Print Network [OSTI]

STATISTICAL DESCRIPTION OF THE CHIRIKOV-TAYLOR MODEL IN THE PRESENCE OF NOISE A. B. RECHESTER that the presence of noise makes the statistical description of this system unique. Theform of the diffusion, and statistical averaging, performed ana- lytically with thepath-integral method, are the same. Some

Karney, Charles

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Forest Landscape Description and  

E-Print Network [OSTI]

Forest Landscape Description and Inventories a basis for landplanning and design Pacific Southwest landscape description and inventories ­ a basis for land plan- ning and design. Berkeley, Calif., Pacific SW. Illustrates their application in two inventories made to aid managers and landscape architects in planning

Standiford, Richard B.

62

Reversible micromachining locator  

DOE Patents [OSTI]

This invention provides a device which includes a locator, a kinematic mount positioned on a conventional tooling machine, a part carrier disposed on the locator and a retainer ring. The locator has disposed therein a plurality of steel balls, placed in an equidistant position circumferentially around the locator. The kinematic mount includes a plurality of magnets which are in registry with the steel balls on the locator. In operation, a blank part to be machined is placed between a surface of a locator and the retainer ring (fitting within the part carrier). When the locator (with a blank part to be machined) is coupled to the kinematic mount, the part is thus exposed for the desired machining process. Because the locator is removably attachable to the kinematic mount, it can easily be removed from the mount, reversed, and reinserted onto the mount for additional machining. Further, the locator can likewise be removed from the mount and placed onto another tooling machine having a properly aligned kinematic mount. Because of the unique design and use of magnetic forces of the present invention, positioning errors of less than 0.25 micrometer for each machining process can be achieved. 7 figs.

Salzer, L.J.; Foreman, L.R.

1999-08-31T23:59:59.000Z

63

Reversible micromachining locator  

DOE Patents [OSTI]

This invention provides a device which includes a locator, a kinematic mount positioned on a conventional tooling machine, a part carrier disposed on the locator and a retainer ring. The locator has disposed therein a plurality of steel balls, placed in an equidistant position circumferentially around the locator. The kinematic mount includes a plurality of magnets which are in registry with the steel balls on the locator. In operation, a blank part to be machined is placed between a surface of a locator and the retainer ring (fitting within the part carrier). When the locator (with a blank part to be machined) is coupled to the kinematic mount, the part is thus exposed for the desired machining process. Because the locator is removably attachable to the kinematic mount, it can easily be removed from the mount, reversed, and reinserted onto the mount for additional machining. Further, the locator can likewise be removed from the mount and placed onto another tooling machine having a properly aligned kinematic mount. Because of the unique design and use of magnetic forces of the present invention, positioning errors of less than 0.25 micrometer for each machining process can be achieved.

Salzer, Leander J. (Los Alamos, NM); Foreman, Larry R. (Los Alamos, NM)

1999-01-01T23:59:59.000Z

64

Description urse deals w  

E-Print Network [OSTI]

H Place: O Meeting Tentativ W L o L W L M L Description urse deals w g offshore r seamounts, animal ecology. Plant-animal interactions in the shallow subtidal zone. Lab & Field Work: Community analysis

65

B Plant facility description  

SciTech Connect (OSTI)

Buildings 225B, 272B, 282B, 282BA, and 294B were removed from the B Plant facility description. Minor corrections were made for tank sizes and hazardous and toxic inventories.

Chalk, S.E.

1996-10-04T23:59:59.000Z

66

Reversible micromachining locator  

DOE Patents [OSTI]

A locator with a part support is used to hold a part onto the kinematic mount of a tooling machine so that the part can be held in or replaced in exactly the same position relative to the cutting tool for machining different surfaces of the part or for performing different machining operations on the same or different surfaces of the part. The locator has disposed therein a plurality of steel balls placed at equidistant positions around the planar surface of the locator and the kinematic mount has a plurality of magnets which alternate with grooves which accommodate the portions of the steel balls projecting from the locator. The part support holds the part to be machined securely in place in the locator. The locator can be easily detached from the kinematic mount, turned over, and replaced onto the same kinematic mount or another kinematic mount on another tooling machine without removing the part to be machined from the locator so that there is no need to touch or reposition the part within the locator, thereby assuring exact replication of the position of the part in relation to the cutting tool on the tooling machine for each machining operation on the part.

Salzer, Leander J. (Los Almos, NM); Foreman, Larry R. (late of Los Alamos, NM)

2002-01-01T23:59:59.000Z

67

Provided to Michigan State University as an example system description for educational purposes only. All questions should be directed to the instructor, Dr. Betty H.C. Cheng at Michigan State University.  

E-Print Network [OSTI]

convenience and safety features to vehicle drivers and passengers, with increasing levels of automation of the vehicle in a variety of circumstances including, but not limited to, congested traffic conditions, adverse weather and road conditions, varying states of health of vehicle equipment, and varying skill levels

68

Locating Heat Recovery Opportunities  

E-Print Network [OSTI]

Basic concepts of heat recovery are defined as they apply to the industrial community. Methods for locating, ranking, and developing heat recovery opportunities are presented and explained. The needs for useful heat 'sinks' are emphasized as equal...

Waterland, A. F.

1981-01-01T23:59:59.000Z

69

International land rig locator  

SciTech Connect (OSTI)

Mechanical specifications, ratings, locations, and status are listed for each of the 5,000 contract rotary drilling rigs operated by the more than 700 independent drilling contractors throughout the Free World.

Not Available

1984-03-01T23:59:59.000Z

70

International land rig locator  

SciTech Connect (OSTI)

Mechanical specifications, ratings, locations, and status are listed for each of the 5,000 contract rotary drilling rigs operated by more than 700 independent drilling contractors throughout the Free World.

Not Available

1983-09-01T23:59:59.000Z

71

Location linked information  

E-Print Network [OSTI]

This work builds an infrastructure called Location Linked Information that offers a means to associate digital information with public, physical places. This connection creates a hybrid virtual/physical space, called glean ...

Mankins, Matthew William David, 1975-

2003-01-01T23:59:59.000Z

72

a r r i o r BUILDING# NAME LOCATION BUILDING# NAME LOCATION OTHER BUILDINGS LOCATION SORORITIES LOCATION  

E-Print Network [OSTI]

Admissions Parking Palmer Lake B l a c k W a r r i o r R i v e r BUILDING# NAME LOCATION BUILDING# NAME LOCATION OTHER BUILDINGS LOCATION SORORITIES LOCATION 7046 70127012 1155 10331033 1150 1039 1038

Carver, Jeffrey C.

73

Computer Lab Information Location  

E-Print Network [OSTI]

M340 Computer Lab Information · Location: The computer labs accessible to you are Weber 205 it is recommended that you save your files on a floppy when you are finished. · There is another directory, g:\\m340 to the saved files you have to add the directory to the Matlab path. To do this type addpath g:\\m340

Dangelmayr, Gerhard

74

Alternative Fueling Station Locator App Provides Info at Your...  

Broader source: Energy.gov (indexed) [DOE]

Fueling Station Locator website. It provides information on more than 15,000 public and private alternative fueling stations throughout the United States. The app lists where...

75

UO{sub 3} plant turnover - facility description document  

SciTech Connect (OSTI)

This document was developed to provide a facility description for those portions of the UO{sub 3} Facility being transferred to Bechtel Hanford Company, Inc. (BHI) following completion of facility deactivation. The facility and deactivated state condition description is intended only to serve as an overview of the plant as it is being transferred to BHI.

Clapp, D.A.

1995-01-01T23:59:59.000Z

76

Detailed Description of Key NIF Milestones for NNSA Description  

E-Print Network [OSTI]

1 Detailed Description of Key NIF Milestones for NNSA Short Description NIC EP Rev 4.0 Approved = Milestone Reporting Tool, which NNSA uses to support quarterly status reporting of NIC Level 1-2 milestones

77

ARM - Instrument Location Table  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation InInformation InExplosionAnnouncements MediagovCampaignsListgovInstrumentsLocation Table

78

Transportation Networks and Location A Geometric Approach  

E-Print Network [OSTI]

Transportation Networks and Location A Geometric Approach Belén Palop1,2 1Departamento de March 2009 Florida State University #12;Belén Palop, UVa, SUNY Outline Transportation Network Model;Transportation Network Model Belén Palop, UVa, SUNY Outline Transportation Network Model Network placement

Palop del Río, Belén

79

Inductive Corrections of Action Descriptions Marcello Balduccini  

E-Print Network [OSTI]

description AD is a set of dynamic laws and state constraints1 . A recorded history up to step cT, Hc, its head holds. 1. h(L, T) s law(W), head(W, L), prec h(W, T). % If the preconditions hold and the action occurred, the head holds at the next step. 2. h(L, T + 1) d law(W), head(W, L), prec h(W, T

Zhang, Yuanlin

80

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (Regular; Twelve and ledges and clean fixtures. Maintain building entrances according to conditions by removing snow and ice

Endres. William J.

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (9 month, part according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

82

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (9 month, full according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

83

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (9 month, full and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying

84

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (Regular; Twelve according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

85

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12-month, full according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

86

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: BUILDING MECHANIC II (Pay, parking lots, elevators, snow conditions, HVAC equipment temperature control systems, pool systems, ice

87

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN/EVENT ASSOCIATE entrances according to conditions by removing snow and ice, applying sand and salt, and removing debris

88

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12-month, full and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying

89

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12 month, part according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

90

Student Internship Programs Program Description  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Student Internship Programs Program Description The objective of the Laboratory's student internship programs is to provide students with opportunities for meaningful hands- on...

91

This book describes the responsibilities of show personnel and outlines the job descriptions of various positions for the NH 4-H State Horse Show (or any other 4-H horse show).  

E-Print Network [OSTI]

of various positions for the NH 4-H State Horse Show (or any other 4-H horse show). June 2013 #12;Table of Contents Organizing a 4-H Horse Show ........................................................................................... 1 State 4-H Horse Show Philosophy................................................................ 1

New Hampshire, University of

92

Spring loaded locator pin assembly  

DOE Patents [OSTI]

This invention deals with spring loaded locator pins. Locator pins are sometimes referred to as captured pins. This is a mechanism which locks two items together with the pin that is spring loaded so that it drops into a locator hole on the work piece.

Groll, Todd A. (Idaho Falls, ID); White, James P. (Pocatelo, ID)

1998-01-01T23:59:59.000Z

93

Spring loaded locator pin assembly  

DOE Patents [OSTI]

This invention deals with spring loaded locator pins. Locator pins are sometimes referred to as captured pins. This is a mechanism which locks two items together with the pin that is spring loaded so that it drops into a locator hole on the work piece. 5 figs.

Groll, T.A.; White, J.P.

1998-03-03T23:59:59.000Z

94

Description of the Scenario Machine  

E-Print Network [OSTI]

We present here an updated description of the "Scenario Machine" code. This tool is used to carry out a population synthesis of binary stars. Previous version of the description can be found at http://xray.sai.msu.ru/~mystery//articles/review/contents.html

V. M. Lipunov; K. A. Postnov; M. E. Prokhorov; A. I. Bogomazov

2007-04-11T23:59:59.000Z

95

Web Page Development Company Description  

E-Print Network [OSTI]

Web Page Development Company Description: Service Provider web site Short Project Name: Research support and networking. Company Description: Website Building Company. This company drives traffic to websites through search engines, and optimizes websites over time. Short Project Name: Site Build Project

Dahl, David B.

96

PERMIT MUST BE AVAILABLE AT ENTRY LOCATION IN PLASTIC SLEEVE CONFINED SPACE ENTRY PERMIT  

E-Print Network [OSTI]

PERMIT MUST BE AVAILABLE AT ENTRY LOCATION IN PLASTIC SLEEVE CONFINED SPACE ENTRY PERMIT CONFINED SPACE GENERAL INFORMATION: Permit Number: Call 656-1297 Date: Equipment Number: Time Issued: Valid Until (Time, max. 8 hrs): Confined Space Description and Location: Purpose of Entry: PERMIT SPACE HAZARDS

Stuart, Steven J.

97

On description of quantum plasma  

E-Print Network [OSTI]

A plasma becomes quantum when the quantum nature of its particles significantly affects its macroscopic properties. To answer the question of when the collective quantum plasma effects are important, a proper description of such effects is necessary. We consider here the most common methods of description of quantum plasma, along with the related assumptions and applicability limits. In particular, we analyze in detail the hydrodynamic description of quantum plasma, as well as discuss some kinetic features of analytic properties of linear dielectric response function in quantum plasma. We point out the most important, in our view, fundamental problems occurring already in the linear approximation and requiring further investigation. (submitted to Physics-Uspekhi)

S. V. Vladimirov; Yu. O. Tyshetskiy

2011-01-21T23:59:59.000Z

98

Description Plants ESIS ESD FSGD  

E-Print Network [OSTI]

Ecological Site Description Plants ESIS ESD FSGD ESI Forestland ESI Rangeland Data Access > Return CHARACTERISTICS Site Type: Rangeland Site Name: Red Sandy Loam 25-32" PZ Site ID: R082AY369TX Major Land Resource

99

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION Job Title: DIRECTOR Department: CENTER faculty in developing and assessing course goals in support of program and university learning goals for online and blended learning. Provide assistance in evaluating and implementing educational technologies

Endres. William J.

100

The Description of Large Systems  

E-Print Network [OSTI]

In this paper we discuss the problems associated with the description and manipulation of large systems when their sources are not maintained as single fields. We show why and how tools that address these issues, such ...

Pitman, Kent

1984-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN/EVENT ASSOCIATE to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere to current uniform

Endres. William J.

102

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12 month/40 and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying be exercised over seasonal/temporary university employees and student assistants. QUALIFICATION REQUIREMENTS

103

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12 month and ice, applying sand and salt, and removing debris. Adhere to current department uniform policy supervision may be exercised over seasonal/temporary university employees and student assistants

104

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12 mos and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying be exercised over seasonal/temporary university employees and student assistants. QUALIFICATION REQUIREMENTS

105

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (9 month/20 hours and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying be exercised over seasonal/temporary university employees and student assistants. QUALIFICATION REQUIREMENTS

106

Museum Educator Volunteer Job Description  

E-Print Network [OSTI]

Museum Educator Volunteer Job Description The Beaty Biodiversity Museum, a new museum housing UBC's rich biological collections, is dedicated to enhancing to the public. Volunteer Museum Educators play a vital role in the museum mission

Pulfrey, David L.

107

Mobile Alternative Fueling Station Locator  

SciTech Connect (OSTI)

The Department of Energy's Alternative Fueling Station Locator is available on-the-go via cell phones, BlackBerrys, or other personal handheld devices. The mobile locator allows users to find the five closest biodiesel, electricity, E85, hydrogen, natural gas, and propane fueling sites using Google technology.

Not Available

2009-04-01T23:59:59.000Z

108

2014 State Capital Request Board of Regents  

E-Print Network [OSTI]

on FY 2015 capital budget Financial Summary Request dollars in thousands Location Project Total State U

Weiblen, George D

109

Position Description: Ph.D. Student in Vegetation Modeling and Climate Vulnerability Montana State University is seeking a Ph.D. student for a NASA Applied Sciences project on  

E-Print Network [OSTI]

Information. An overview of the project can be found at (http://www.montana.edu/lccvp/) Application Procedures Montana State University is seeking a Ph.D. student for a NASA Applied Sciences project on vulnerability of biological resources under climate and land use change. The project will use NASA resources to inform climate

Hansen, Andrew J.

110

Location-aware active signage  

E-Print Network [OSTI]

Three-dimensional route maps, which depict a path from one location to another, can be powerful tools for visualizing and communicating directions. This thesis presents a client-server architecture for generating and ...

Nichols, Patrick James, 1981-

2004-01-01T23:59:59.000Z

111

CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.

J.F. Beesley

2005-04-21T23:59:59.000Z

112

Job Descriptions Acony is an independent and privately-owned game development studio located in the  

E-Print Network [OSTI]

with the QA team and review Test Cases for implemented work. Check test results and inform Senior / QA Lead account, and you'll be equipped with an extensive survival guide about life in Germany. QA Tester Position Reporting to Senior Tester and QA Lead Position Requirements Enthusiasm for games and game development

Reyle, Uwe

113

Location-Based Tax Incentives: Evidence From India Ritam Chaurey  

E-Print Network [OSTI]

in India. Specifically, I examine the federally financed New Industrial Policy for the statesLocation-Based Tax Incentives: Evidence From India Ritam Chaurey Department of Economics, State University of New York, Binghamton August 24, 2014 Abstract While policies targeting particular geographic

Bandyopadhyay, Antar

114

Position Description Project Manager, Office of Community and Economic Development  

E-Print Network [OSTI]

Position Description Project Manager, Office of Community and Economic Development Full will support all aspects of the success of CSU's Office of Community and Economic Development projects from to the Director and Assistant Director of the Community and Economic Development Office of Colorado State

115

Project Name Work Description -as Approv Aug 09 Anchorage Harbor,  

E-Print Network [OSTI]

; perform energy upgrades; replace underground fuel tank and heating system to meet Environmental CompliancePrimary State Corps District Project Name Work Description - as Approv Aug 09 Planned Allocation excessive maintenance. Reduces future maintenance costs. 1,000,000 AL Mobile Alabama River Lakes, AL Award 8

US Army Corps of Engineers

116

Sustainable Internet Architecture PROJECT DESCRIPTION  

E-Print Network [OSTI]

Sustainable Internet Architecture PROJECT DESCRIPTION 1 Introduction The Internet currently plays that the problems in the current Internet architecture stem from its lack of sustainability which impedes future de of challenges. Numerous research studies on a new Internet architecture (e.g., [16, 37, 48, 54, 55]) have

Kuzmanovic, Aleksandar

117

Project Description July 13, 2006  

E-Print Network [OSTI]

Project Description July 13, 2006 1 Results from Prior NSF Support The Department of Physics. The grant period started May 1, 1995 with a duration of twenty-four months. In this project video technology' learning of the fundamental ideas of Newtonian mechanics. With the use of low-cost video cameras

Gilfoyle, Jerry

118

Project Description Executive Summary Report  

E-Print Network [OSTI]

$Total Project Cost: 1,000,000Auxillary Enterprises Balances $ 9,400,000Revenue Financing System Bonds $ 1Project Description Executive Summary Report Project Information Project Budget Project Funding 302-680 Parking Structure Phase I This project consists of a 750 space parking garage of approximately 251

O'Toole, Alice J.

119

RF test bench automation Description  

E-Print Network [OSTI]

RF test bench automation Description: Callisto would like to implement automated RF test bench. Three RF test benches have to be studied and automated: LNA noise temperature test bench LNA gain phase of the test benches and an implementation of the automation phase. Tasks: Noise temperature

Dobigeon, Nicolas

120

THE UNIVERSITY OF CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

1 THE UNIVERSITY OF ROCHESTER CLASSIFICATION DESCRIPTION TITLE: Web Specialist and Analyst DATE: 01 ­ Advancement Service and provide assistance in the development and management of web-based assets, direct solicitations support ­ webpages for print and e-mail marketing support, web development, Share

Portman, Douglas

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

ARCHITECTURE PROGRAMS AND COURSE DESCRIPTIONS  

E-Print Network [OSTI]

2009­2010 ARCHITECTURE PROGRAMS AND COURSE DESCRIPTIONS UNIVERSITY OF MICHIGAN #12;© 2008, degree options, and courses for the UM architecture program. This document is available for download from the Taubman College website at http://www.TaubmanCollege. umich.edu/architecture/bulletin/. If you

Kamat, Vineet R.

122

Description  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phasesData FilesShape, Density, and Morphologyusing TD-DFT. |

123

Synchronized sampling improves fault location  

SciTech Connect (OSTI)

Transmission line faults must be located accurately to allow maintenance crews to arrive at the scene and repair the faulted section as soon as possible. Rugged terrain and geographical layout cause some sections of power transmission lines to be difficult to reach. In the past, a variety of fault location algorithms were introduced as either an add-on feature in protective relays or stand-alone implementation in fault locators. In both cases, the measurements of current and voltages were taken at one terminal of a transmission line only. Under such conditions, it may become difficult to determine the fault location accurately, since data from other transmission line ends are required for more precise computations. In the absence of data from the other end, existing algorithms have accuracy problems under several circumstances, such as varying switching and loading conditions, fault infeed from the other end, and random value of fault resistance. Most of the one-end algorithms were based on estimation of voltage and current phasors. The need to estimate phasors introduces additional difficulty in high-speed tripping situations where the algorithms may not be fast enough in determining fault location accurately before the current signals disappear due to the relay operation and breaker opening. This article introduces a unique concept of high-speed fault location that can be implemented either as a simple add-on to the digital fault recorders (DFRs) or as a stand-alone new relaying function. This advanced concept is based on the use of voltage and current samples that are synchronously taken at both ends of a transmission line. This sampling technique can be made readily available in some new DFR designs incorporating receivers for accurate sampling clock synchronization using the satellite Global Positioning System (GPS).

Kezunovic, M. [Texas A and M Univ., College Station, TX (United States)] [Texas A and M Univ., College Station, TX (United States); Perunicic, B. [Lamar Univ., Beaumont, TX (United States)] [Lamar Univ., Beaumont, TX (United States)

1995-04-01T23:59:59.000Z

124

Location logistics of industrial facilities  

E-Print Network [OSTI]

of company intent1ons is not made at the correct time and in the correct manner. 6. Recommend Best Areas for Further Invest1 ations. Once the on-site evaluations have been completed, the 11st of possibilities is reduced still further and only the best... location and site selection. This data was gathered through library research, atten- dance of various industr1al development conferences, sol1citation of mater1als from individuals currently involved with industrial facil1ties location, and various...

Hammack, William Eugene

1981-01-01T23:59:59.000Z

125

Boston, Massachusetts Location: Boston, MA  

E-Print Network [OSTI]

-recovery ventilation and water-source heat pumps Each unit has fresh air ducted independently. Each residence is warmed by a heat pump that taps the Trigen Energy Corporation steam lines that run underneath the street. #12;WallsBoston, Massachusetts #12;Location: Boston, MA Building type(s): Multi-unit residential, Retail 350

Prevedouros, Panos D.

126

Building Address Locations -Assumes entire  

E-Print Network [OSTI]

Building Address Locations - Assumes entire building unless noted Designation Submit through* 560, 4 BU Crosstown Center 801 Massachusetts Ave Floor 1, 2 BMC BCD Building 800 Harrison Avenue BCD BMC Biosquare III 670 Albany Floors 2, 3, 6, 7 BMC Biosquare III 670 Albany Floors 1, 4, 5, 8 BU Building

Guenther, Frank

127

Wigner-function description of EPR experiment  

E-Print Network [OSTI]

We provide a detailed description of the EPR paradox (in the Bohm version) for a two qubit-state in the discrete Wigner function formalism. We compare the probability distributions for two qubit relevant to simultaneously-measurable observables (computed from the Wigner function) with the probability distributions representing two perfectly-correlated classic particles in a discrete phase-space. We write in both cases the updating formulae after a measure, thus obtaining a mathematical definition of \\textit{classic collapse} and \\textit{quantum collapse}. We study, with the EPR experiment, the joint probability distributions of Alice's and Bob's qubit before and after the measure, analyzing the non-local effects. In particular, we give a more precise definition of locality, which we call m-locality: we show that quantum systems may violate this kind of locality, thus preserving, in an EPR-like argument, the completeness of Quantum Mechanics.

Riccardo Franco

2007-01-12T23:59:59.000Z

128

Topological BF field theory description of topological insulators  

E-Print Network [OSTI]

Topological phases of matter are described universally by topological field theories in the same way that symmetry-breaking phases of matter are described by Landau-Ginzburg field theories. We propose that topological insulators in two and three dimensions are described by a version of abelian $BF$ theory. For the two-dimensional topological insulator or quantum spin Hall state, this description is essentially equivalent to a pair of Chern-Simons theories, consistent with the realization of this phase as paired integer quantum Hall effect states. The $BF$ description can be motivated from the local excitations produced when a $\\pi$ flux is threaded through this state. For the three-dimensional topological insulator, the $BF$ description is less obvious but quite versatile: it contains a gapless surface Dirac fermion when time-reversal-symmetry is preserved and yields "axion electrodynamics", i.e., an electromagnetic $E \\cdot B$ term, when time-reversal symmetry is broken and the surfaces are gapped. Just as changing the coefficients and charges of 2D Chern-Simons theory allows one to obtain fractional quantum Hall states starting from integer states, $BF$ theory could also describe (at a macroscopic level) fractional 3D topological insulators with fractional statistics of point-like and line-like objects.

Gil Young Cho; Joel E. Moore

2010-12-03T23:59:59.000Z

129

Nuclear-fuel-cycle risk assessment: descriptions of representative non-reactor facilities. Sections 1-14  

SciTech Connect (OSTI)

The Fuel Cycle Risk Assessment Program was initiated to provide risk assessment methods for assistance in the regulatory process for nuclear fuel cycle facilities other than reactors. This report, the first from the program, defines and describes fuel cycle elements that are being considered in the program. One type of facility (and in some cases two) is described that is representative of each element of the fuel cycle. The descriptions are based on real industrial-scale facilities that are current state-of-the-art, or on conceptual facilities where none now exist. Each representative fuel cycle facility is assumed to be located on the appropriate one of four hypothetical but representative sites described. The fuel cycles considered are for Light Water Reactors with once-through flow of spent fuel, and with plutonium and uranium recycle. Representative facilities for the following fuel cycle elements are described for uranium (or uranium plus plutonium where appropriate): mining, milling, conversion, enrichment, fuel fabrication, mixed-oxide fuel refabrication, fuel reprocessing, spent fuel storage, high-level waste storage, transuranic waste storage, spent fuel and high-level and transuranic waste disposal, low-level and intermediate-level waste disposal, and transportation. For each representative facility the description includes: mainline process, effluent processing and waste management, facility and hardware description, safety-related information and potential alternative concepts for that fuel cycle element. The emphasis of the descriptive material is on safety-related information. This includes: operating and maintenance requirements, input/output of major materials, identification and inventories of hazardous materials (particularly radioactive materials), unit operations involved, potential accident driving forces, containment and shielding, and degree of hands-on operation.

Schneider, K.J.

1982-09-01T23:59:59.000Z

130

Property:News/PrimaryLocation | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revisionEnvReviewNonInvasiveExploration Jump to:FieldProceduresFY Description URLs to anyPrimaryLocation Jump to:

131

ORIGINAL ARTICLE Approximate Truth and Descriptive Nesting  

E-Print Network [OSTI]

ORIGINAL ARTICLE Approximate Truth and Descriptive Nesting Jeffrey Alan Barrett Received: 7 July. This paper presents a notion of local probable approximate truth in terms of descriptive nesting relations

Barrett, Jeffrey A.

132

SNF AGING SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts, diagrams, drawings, lists and additional supporting information; and Appendix C is a list of procedures that will be used to operate the system.

L.L. Swanson

2005-04-06T23:59:59.000Z

133

ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

S. Roy

2004-06-24T23:59:59.000Z

134

ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this revision of the System Description Document (SDD) is to establish requirements that drive the design of the electrical power system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience are design engineers. This type of SDD leads and follows the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. This SDD follows the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to this system are obtained from ''Project Functional and Operational Requirements'' (F&OR) (Siddoway, 2003). Other requirements to support the design process have been taken from higher level requirements documents such as ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), the fire hazards analyses, and the preclosure safety analysis. The above mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canori and Leitner 2003) requirements. This SDD includes several appendices with supporting information. Appendix B lists key system charts, diagrams, drawings, and lists; and Appendix C is a list of system procedures.

M. Maniyar

2004-06-22T23:59:59.000Z

135

Persistent Uniform Resource Locators (PURLs) | Scientific and...  

Office of Scientific and Technical Information (OSTI)

Locators (PURLs) Print page Print page PURLs (Persistent Uniform Resource Locators) are Web addresses that act as permanent identifiers in the face of a dynamic and changing Web...

136

Energy Department Launches Alternative Fueling Station Locator...  

Broader source: Energy.gov (indexed) [DOE]

Launches Alternative Fueling Station Locator App Energy Department Launches Alternative Fueling Station Locator App November 7, 2013 - 11:16am Addthis As part of the Obama...

137

Dynamic State Alteration Techniques for Automatically Locating Software Errors  

E-Print Network [OSTI]

xii List of Tables The Siemens benchmarkerrors. . . . . . . . . . . 146 Siemens benchmark programsare encountered using the Siemens benchmark programs [64].

Jeffrey, Dennis

2009-01-01T23:59:59.000Z

138

Volatile organic compounds in some urban locations in United States  

E-Print Network [OSTI]

. Air samples were collected and analyzed in accordance with US Environmental Protection Agency, an increased awareness of air pollutants and new potential sources of airborne toxic chemicals have raised to the immune and nervous systems, and other fatal diseases (Singh et al., 1982; Kao, 1994). Recently, a number

Aneja, Viney P.

139

Dynamic State Alteration Techniques for Automatically Locating Software Errors  

E-Print Network [OSTI]

on High Perfor- mance Computer Architecture, pages 121–132,on High- Performance Computer Architecture, pages 243–247,Symposium on Computer Architecture, pages 284–295, June

Jeffrey, Dennis

2009-01-01T23:59:59.000Z

140

Descriptive Model of Generic WAMS  

SciTech Connect (OSTI)

The Department of Energy’s (DOE) Transmission Reliability Program is supporting the research, deployment, and demonstration of various wide area measurement system (WAMS) technologies to enhance the reliability of the Nation’s electrical power grid. Pacific Northwest National Laboratory (PNNL) was tasked by the DOE National SCADA Test Bed Program to conduct a study of WAMS security. This report represents achievement of the milestone to develop a generic WAMS model description that will provide a basis for the security analysis planned in the next phase of this study.

Hauer, John F.; DeSteese, John G.

2007-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Description of CBECS Building Types  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 633 622 56623 4623 42YearDelaware Natural2Description

142

LOCATION: Johnson County Sheriff's Office  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformationPostdocs &JeffIntensitySurfaceLOCATION: Johnson County

143

Ombuds Office Location & Hours  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratorySpeeding access1 TechnicalOil inventories inOmbuds Office Location

144

Integrated Project Management System description  

SciTech Connect (OSTI)

The Integrated Program Management System (IPMS) Description is a ``working`` document that describes the work processes of the Uranium Mill Tailings Remedial Action Project Office (UMTRA) and IPMS Group. This document has undergone many revisions since the UMTRA Project began; this revision not only updates the work processes but more clearly explains the relationships between the Project Office, contractors, and other participants. The work process flow style has been revised to better describe Project work and the relationships of participants. For each work process, more background and guidance on ``why`` and ``what is expected`` is given. For example, a description of activity data sheets has been added in the work organization and the Project performance and reporting processes, as well as additional detail about the federal budget process and funding management and improved flow charts and explanations of cost and schedule management. A chapter has been added describing the Cost Reduction/Productivity Improvement Program. The Change Control Board (CCB) procedures (Appendix A) have been updated. Project critical issues meeting (PCIM) procedures have been added as Appendix B. Budget risk assessment meeting procedures have been added as Appendix C. These appendices are written to act as stand-alone documentation for each process. As the procedures are improved and updated, the documentation can be updated separately.

NONE

1994-09-01T23:59:59.000Z

145

On relation between rest frame and light-front descriptions of quarkonium  

E-Print Network [OSTI]

In this paper we study the relation between the light-front (infinite momentum) and rest-frame descriptions of quarkonia. While the former is more convenient for high-energy production, the latter is usually used for the evaluation of charmonium properties. In particular, we discuss the dynamics of a relativistically moving system with nonrelativistic internal motion and give relations between rest frame and light-front potentials used for the description of quarkonium states. We consider two approximations, first the small coupling regime, and next the nonperturbative small binding energy approximation. In both cases we get consistent results. Our results could be relevant for the description of final state interactions in a wide class of processes, including quarkonium production on nuclei and plasma. Moreover, they can be extended to the description of final state interactions in the production of weakly bound systems, such as for example the deuteron.

B. Z. Kopeliovich; E. Levin; Ivan Schmidt; M. Siddikov

2015-01-07T23:59:59.000Z

146

On relation between rest frame and light-front descriptions of quarkonium  

E-Print Network [OSTI]

In this paper we study the relation between the light-front (infinite momentum) and rest-frame descriptions of quarkonia. While the former is more convenient for high-energy production, the latter is usually used for the evaluation of charmonium properties. In particular, we discuss the dynamics of a relativistically moving system with nonrelativistic internal motion and give relations between rest frame and light-front potentials used for the description of quarkonium states. We consider two approximations, first the small coupling regime, and next the nonperturbative small binding energy approximation. In both cases we get consistent results. Our results could be relevant for the description of final state interactions in a wide class of processes, including quarkonium production on nuclei and plasma. Moreover, they can be extended to the description of final state interactions in the production of weakly bound systems, such as for example the deuteron.

Kopeliovich, B Z; Schmidt, Ivan; Siddikov, M

2015-01-01T23:59:59.000Z

147

Efficient Dynamic Programming for Optimal Multi-Location Robot Rendezvous  

E-Print Network [OSTI]

be utilized in real world robot applications. To demonstate the practical potential of our algorithm, we use in a state space with dimension greater than that of the individual robots. We use the application of multiEfficient Dynamic Programming for Optimal Multi-Location Robot Rendezvous Ken Alton and Ian M

Mitchell, Ian

148

The vegetation of Yucca Mountain: Description and ecology  

SciTech Connect (OSTI)

Vegetation at Yucca Mountain, Nevada, was monitored over a six-year period, from 1989 through 1994. Yucca Mountain is located at the northern limit of the Mojave Desert and is the only location being studied as a potential repository for high-level nuclear waste. Site characterization consists of a series of multidisciplinary, scientific investigations designed to provide detailed information necessary to assess the suitability of the Yucca Mountain Site as a repository. This vegetation description establishes a baseline for determining the ecological impact of site characterization activities; it porvides input for site characterization research and modeling; and it clarifies vegetation community dynamics and relationships to the physical environment. A companion study will describe the impact of site characterization of vegetation. Cover, density, production, and species composition of vascular plants were monitored at 48 Ecological Study Plots (ESPs) stratified in four vegetation associations. Precipitation, soil moisture, and maximum and minimum temperatures also were measured at each study plot.

NONE

1996-03-29T23:59:59.000Z

149

Selected Project City State Project Description Proposed DOE Share  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energyof the Americas | DepartmentDepartment ofThe projects below represent

150

Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER  

E-Print Network [OSTI]

Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER Subject Description Monday AND INSURANCE 242 ACTUARIAL SCIENCE 243 TRANSPORTATION AND PUBLIC UTILITIES 244 CLASSICS 250 COMMUNICATION ARTS Reporting #12;Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER Subject Description Monday

Wisconsin at Madison, University of

151

Machinist Pipeline/Apprentice Program Program Description  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Machinist PipelineApprentice Program Program Description The Machinist Pipeline Program was created by the Prototype Fabrication Division to fill a critical need for skilled...

152

Electricity Delivery and Energy Reliability PROGRAM DESCRIPTION  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

32 Electricity Delivery and Energy Reliability PROGRAM DESCRIPTION The Office of Electricity Delivery and Energy Reliability (OE) leads national efforts to modernize the electric...

153

Phenomenological description of bidirectional surface reflection  

E-Print Network [OSTI]

Phenomenological description of bidirectional surface reflection Jan J. Koenderink and Andrea J satellites). In some cases one has (usually approximate, phenomenological) models, but in most cases one

O'Brien, James F.

154

Home energy rating systems: Program descriptions  

SciTech Connect (OSTI)

This report contains the descriptions of home energy rating and labelling programs (HERS) that were surveyed in January 1986 as part of a national evaluation of HERS.

Vine, E.; Barnes, B.K.; Ritschard, R.

1987-02-01T23:59:59.000Z

155

Topological BF field theory description of topological insulators  

SciTech Connect (OSTI)

Research Highlights: > We show that a BF theory is the effective theory of 2D and 3D topological insulators. > The non-gauge-invariance of the bulk theory yields surface terms for a bosonized Dirac fermion. > The 'axion' term in electromagnetism is correctly obtained from gapped surfaces. > Generalizations to possible fractional phases are discussed in closing. - Abstract: Topological phases of matter are described universally by topological field theories in the same way that symmetry-breaking phases of matter are described by Landau-Ginzburg field theories. We propose that topological insulators in two and three dimensions are described by a version of abelian BF theory. For the two-dimensional topological insulator or quantum spin Hall state, this description is essentially equivalent to a pair of Chern-Simons theories, consistent with the realization of this phase as paired integer quantum Hall effect states. The BF description can be motivated from the local excitations produced when a {pi} flux is threaded through this state. For the three-dimensional topological insulator, the BF description is less obvious but quite versatile: it contains a gapless surface Dirac fermion when time-reversal-symmetry is preserved and yields 'axion electrodynamics', i.e., an electromagnetic E . B term, when time-reversal symmetry is broken and the surfaces are gapped. Just as changing the coefficients and charges of 2D Chern-Simons theory allows one to obtain fractional quantum Hall states starting from integer states, BF theory could also describe (at a macroscopic level) fractional 3D topological insulators with fractional statistics of point-like and line-like objects.

Cho, Gil Young [Department of Physics, University of California, Berkeley, CA 94720 (United States); Moore, Joel E., E-mail: jemoore@berkeley.edu [Department of Physics, University of California, Berkeley, CA 94720 (United States); Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States)

2011-06-15T23:59:59.000Z

156

Ceramic corrosion/erosion project description  

SciTech Connect (OSTI)

As a part of the United States Department of Energy's High Temperature Turbine Technology Program, the Morgantown Energy Technology Center is participating in a Ceramics Corrosion/Erosion Materials Study. Objective is to create a technology base for ceramic materials which could be used by stationary gas power turbines operating with a high-temperature, coal-derived, low-Btu gas products of combustion environment. Two facilities are designed and installed to burn a varying low-Btu coal-derived gas in a controlled manner. This report contains the objectives and testing philosophy as well as the operating, specimen handling, and emergency procedures for the facilities. The facilities were checked out in August/September 1980. Testing is scheduled to begin in late 1980 with completion of 1000 hours of ceramic materials exposure to be completed by early 1981. Most of the enclosed is an update of two METC Information Releases (IR), i.e., IR 442 (1979) Test Plan for Ceramic Corrosion/Erosion Project, and IR 817 (1980) Ceramic Corrosion/Erosion Project Description.

Nakaishi, C.V.; Carpenter, L.K.

1981-02-01T23:59:59.000Z

157

Transmutation Fuel Campaign Description and Status  

SciTech Connect (OSTI)

This report contains a technical summary package in response to a Level 2 milestone in the transmutation fuel campaign (TFC) management work-package calling for input to the Secretarial decision. At present, the form of the Secretarial decision package is not fully defined, and it is not clear exactly what will be required from the TFC as a final input. However, it is anticipated that a series oftechnical and programmatic documents will need to be provided in support of a wider encompassing document on GNEP technology development activities. The TFC technical leadership team provides this report as initial input to the secretarial decision package which is being developed by the Technical Integration Office (TIO) in support of Secretarial decision. This report contains a summary of the TFC execution plan with a work breakdown structure, highlevel schedule, major milestones, and summary description of critical activities in support of campaign objectives. Supporting documents referenced in this report but provided under separate cover include: • An updated review of the state-of-the art for transmutation fuel development activities considering national as well as international fuel research and development testing activities. • A definition of the Technology Readiness Level (TRL) used to systematically define and execute the transmutation fuel development activities.

Jon Carmack; Kemal O. Pasamehmetoglu

2008-01-01T23:59:59.000Z

158

Automated Fault Location In Smart Distribution Systems  

E-Print Network [OSTI]

of utilizing a suitable fault location method. As distribution systems are gradually evolving into smart distribution systems, application of more accurate fault location methods based on gathered data from various Intelligent Electronic Devices (IEDs...

Lotfifard, Saeed

2012-10-19T23:59:59.000Z

159

High Exposure Facility Technical Description  

SciTech Connect (OSTI)

The High Exposure Facility is a collimated high-level gamma irradiator that is located in the basement of the 318 building. It was custom developed by PNNL back in 1982 to meet the needs for high range radiological instrument calibrations and dosimeter irradiations. At the time no commercially available product existed that could create exposure rates up to 20,000 R/h. This document is intended to pass on the design criteria that was employed to create this unique facility, while maintaining compliance with ANSI N543-1974, "General Safety Standard for Installations Using Non-Medical X-Ray and Sealed Gamma-Ray Sources, Energies up to 10 MeV."

Carter, Gregory L.; Stithem, Arthur R.; Murphy, Mark K.; Smith, Alex K.

2008-02-12T23:59:59.000Z

160

Analysis of the AirTouch automatic vehicle location system's ability to locate moving vehicles  

E-Print Network [OSTI]

Automatic vehicle location systems are becoming more prevalent in diverse transportation applications. Their ability to locate vehicles can assist in locating emergency and public transit vehicles for better real-time dispatching as well...

Henry, Tracy Lynn

1995-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED,  

E-Print Network [OSTI]

Fuel oil and Turkey Based Biofuel Energy Rocovery 12,000 Industrial Waste $30,000 $500 $29,500 1500WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED, REUSED, RECYCLED OR CONSERVED IN 2006 WASTE TYPE DESCRIPTION DETAILS * Aerosol Can Disposal System Recycling 528 66 pounds of hazardous waste per unit $7

162

DESCRIPTIVE TEXT SEA WATER INORGANIC CARBON DATABASE  

E-Print Network [OSTI]

DESCRIPTIVE TEXT SEA WATER INORGANIC CARBON DATABASE for the CARBON DIOXIDE INFORMATION OF OCEANOGRAPHY (SIO) I. GENERAL DESCRIPTION The database consists of tables presenting oceanic inorganic carbon, titration (total) alkalinity (database abbreviation: "ALK"), and the 13 C / 12 C isotopic ratio

163

STUDENT LABOR POSITION DESCRIPTION Forestry Department  

E-Print Network [OSTI]

approved STUDENT LABOR POSITION DESCRIPTION Forestry Department Most Recently Updated 10/17/00 Position Title: Student Forestry Aid Must work 10 hrs/wk. I. Grade Level: 1­3 (includes full-time, summer and other holiday labor positions) II. Description: A. The following are the essential duties for a Forestry

Baltisberger, Jay H.

164

Internship Description Title: Stellar Solutions Engineering Internship  

E-Print Network [OSTI]

Internship Description Title: Stellar Solutions ­ Engineering Internship Job Description: The internship will be held at the Stellar National Reconnaissance Office in Washington, DC. Tasks will require a background in intelligence, and familiar with all-source analysis. This internship is flexible throughout

Virginia Tech

165

Property description and fact-finding report for NOSR 1&3, Garfield County, Colorado  

SciTech Connect (OSTI)

The US Department of Energy has asked Gustavson Associates, Inc. to serve as an Independent Petroleum Consultant under contract DE-AC01-96FE64202. This authorizes a study and recommendations regarding future development of Naval Oil Shale No. 1 and No. 3 (NOSR 1 and 3) in Garfield County, Colorado. The report that follows is the Phase I fact-finding and property description for that study. The United States of America claims ownership of 100 percent of the minerals and 100 percent of the surface rights in 36,406-acre NOSR-1 and 20,171-acre at NOSR-3. Production has been established on NOSR-3 and currently the DOE owns interests in 53 gas wells that produce on or immediately adjacent to the acreage. NOSR-3 also contains undrilled locations that are classified as proved undeveloped or probable reserves. Recently, the Colorado Oil and Gas Commission (COGCC) approved an increased 40 acre drilling density for the Mesaverde formation that includes portions of NOSR-3.

NONE

1996-06-30T23:59:59.000Z

166

CHAPTER 5. PLASMA DESCRIPTIONS I: KINETIC, TWO-FLUID 1 Plasma Descriptions I  

E-Print Network [OSTI]

CHAPTER 5. PLASMA DESCRIPTIONS I: KINETIC, TWO-FLUID 1 Chapter 5 Plasma Descriptions I: Kinetic, Two-Fluid Descriptions of plasmas are obtained from extensions of the kinetic theory of gases of charged particles in the plasma, and because the electric and magnetic fields in the plasma must

Callen, James D.

167

Locating experiential richness in doom metal  

E-Print Network [OSTI]

PhD Diss. , Bowling Green State University, 2006. Burke,s thesis, Bowling Green State University, 2008. Pattison,

Piper, Jonathan

2013-01-01T23:59:59.000Z

168

Fault Locating, Prediction and Protection (FLPPS)  

SciTech Connect (OSTI)

One of the main objectives of this DOE-sponsored project was to reduce customer outage time. Fault location, prediction, and protection are the most important aspects of fault management for the reduction of outage time. In the past most of the research and development on power system faults in these areas has focused on transmission systems, and it is not until recently with deregulation and competition that research on power system faults has begun to focus on the unique aspects of distribution systems. This project was planned with three Phases, approximately one year per phase. The first phase of the project involved an assessment of the state-of-the-art in fault location, prediction, and detection as well as the design, lab testing, and field installation of the advanced protection system on the SCE Circuit of the Future located north of San Bernardino, CA. The new feeder automation scheme, with vacuum fault interrupters, will limit the number of customers affected by the fault. Depending on the fault location, the substation breaker might not even trip. Through the use of fast communications (fiber) the fault locations can be determined and the proper fault interrupting switches opened automatically. With knowledge of circuit loadings at the time of the fault, ties to other circuits can be closed automatically to restore all customers except the faulted section. This new automation scheme limits outage time and increases reliability for customers. The second phase of the project involved the selection, modeling, testing and installation of a fault current limiter on the Circuit of the Future. While this project did not pay for the installation and testing of the fault current limiter, it did perform the evaluation of the fault current limiter and its impacts on the protection system of the Circuit of the Future. After investigation of several fault current limiters, the Zenergy superconducting, saturable core fault current limiter was selected for installation. Because of some testing problems with the Zenergy fault current limiter, installation was delayed until early 2009 with it being put into operation on March 6, 2009. A malfunction of the FCL controller caused the DC power supply to the superconducting magnet to be turned off. This inserted the FCL impedance into the circuit while it was in normal operation causing a voltage resonance condition. While these voltages never reached a point where damage would occur on customer equipment, steps were taken to insure this would not happen again. The FCL was reenergized with load on December 18, 2009. A fault was experienced on the circuit with the FCL in operation on January 14, 2010. The FCL operated properly and reduced the fault current by about 8%, what was expected from tests and modeling. As of the end of the project, the FCL was still in operation on the circuit. The third phase of the project involved the exploration of several advanced protection ideas that might be at a state where they could be applied to the Circuit of the Future and elsewhere in the SCE electrical system. Based on the work done as part of the literature review and survey, as well as a number of internal meetings with engineering staff at SCE, a number of ideas were compiled. These ideas were then evaluated for applicability and ability to be applied on the Circuit of the Future in the time remaining for the project. Some of these basic ideas were implemented on the circuit including measurement of power quality before and after the FCL. It was also decided that we would take what was learned as part of the Circuit of the Future work and extend it to the next generation circuit protection for SCE. Also at this time, SCE put in a proposal to the DOE for the Irvine Smart Grid Demonstration using ARRA funding. SCE was successful in obtaining funding for this proposal, so it was felt that exploration of new protection schemes for this Irvine Smart Grid Demonstration would be a good use of the project resources. With this in mind, a protection system that uses fault interrupting switches, hi

Yinger, Robert, J.; Venkata, S., S.; Centeno, Virgilio

2010-09-30T23:59:59.000Z

169

Locating Pleistocene refugia: Comparing phylogeographic and ecological niche model predictions  

E-Print Network [OSTI]

, American Museum of Natural History, New York, New York, United States of America, 2 International Rice Research Institute, Los Ban˜os, Laguna, Philippines, 3Natural History Museum & Biodiversity Research Center, University of Kansas, Lawrence, Kansas.... Refugia identified in phylogeographic studies are shown as black outlines. Areas predicted to be refugia are in green, areas not predicted are in gray, and hatching indicates approximate locations of ice sheets [68]. Gray lines indicate present day...

Waltari, Eric; Hijmans, Robert J.; Peterson, A. Townsend; Nyá ri, Á rpá d S.; Perkins, Susan L.; Guralnick, Robert P.

2007-07-11T23:59:59.000Z

170

Microsoft Word - DOE-ID-12-022 Colorado State.doc  

Broader source: Energy.gov (indexed) [DOE]

A. Project Title: Revitalizing Health Physics Education for Nuclear Energy Careers - Colorado State University SECTION B. Project Description The objectives of this Colorado State...

171

Helicopter magnetic survey conducted to locate wells  

SciTech Connect (OSTI)

A helicopter magnetic survey was conducted in August 2007 over 15.6 sq mi at the Naval Petroleum Reserve No. 3’s (NPR-3) Teapot Dome Field near Casper, Wyoming. The survey’s purpose was to accurately locate wells drilled there during more than 90 years of continuous oilfield operation. The survey was conducted at low altitude and with closely spaced flight lines to improve the detection of wells with weak magnetic response and to increase the resolution of closely spaced wells. The survey was in preparation for a planned CO2 flood for EOR, which requires a complete well inventory with accurate locations for all existing wells. The magnetic survey was intended to locate wells missing from the well database and to provide accurate locations for all wells. The ability of the helicopter magnetic survey to accurately locate wells was accomplished by comparing airborne well picks with well locations from an intense ground search of a small test area.

Veloski, G.A.; Hammack, R.W.; Stamp, V. (Rocky Mountain Oilfield Testing Center); Hall, R. (Rocky Mountain Oilfield Testing Center); Colina, K. (Rocky Mountain Oilfield Testing Center)

2008-07-01T23:59:59.000Z

172

Community Detection from Location-Tagged Networks  

E-Print Network [OSTI]

Many real world systems or web services can be represented as a network such as social networks and transportation networks. In the past decade, many algorithms have been developed to detect the communities in a network using connections between nodes. However in many real world networks, the locations of nodes have great influence on the community structure. For example, in a social network, more connections are established between geographically proximate users. The impact of locations on community has not been fully investigated by the research literature. In this paper, we propose a community detection method which takes locations of nodes into consideration. The goal is to detect communities with both geographic proximity and network closeness. We analyze the distribution of the distances between connected and unconnected nodes to measure the influence of location on the network structure on two real location-tagged social networks. We propose a method to determine if a location-based community detection...

Liu, Zhi

2015-01-01T23:59:59.000Z

173

Location theory and the location of industry along an interstate highway  

E-Print Network [OSTI]

to determine the significance of these locational factors among plants with different characteristics that have located in certain localities should provide pertinent information with both practical and theoretical implications. Since 1956, approximately 64... Summary of Plant Location Theory Cost Fac'tots . . . . . . . . . . . . . ~ The Importance of 'the Demand Factor Greenhut's General Theory of Plant Location and the Intangible Factor Location Factors as Revealed by Empirical Study Greenhut's Case...

Miller, James Patterson

1965-01-01T23:59:59.000Z

174

Regenerator Location Problem in Flexible Optical Networks  

E-Print Network [OSTI]

Nov 22, 2014 ... Abstract: In this study we introduce the regenerator location problem in flexible optical networks (RLP-FON). With a given traffic demand, ...

BARIS YILDIZ

2014-11-22T23:59:59.000Z

175

Qualitatitive description : light in the urban environment  

E-Print Network [OSTI]

The quality of our built environment is difficult to describe and to regulate; using light as an example, this thesis develops a descriptive framework using elementary, dynamic and connective forms. The combination of these ...

Stuebing, Susan

1986-01-01T23:59:59.000Z

176

National Forest Inventory Description of attributes  

E-Print Network [OSTI]

National Forest Inventory Description of attributes Woodland_S: Woodland source (a) NFI base map have been mapped in accordance with the NFI mapping rules. National Forest Inventory #12;(f) 2010 AP

177

CHP R&D Project Descriptions  

Broader source: Energy.gov [DOE]

The CHP R&D project portfolio includes advanced reciprocating engine systems (ARES), packaged CHP systems, high-value applications, fuel-flexible CHP, and demonstrations of these technologies. Project fact sheets and short project descriptions are provided below:

178

Project Manager, TBD Job Description Questionnaire (JDQ)  

E-Print Network [OSTI]

Project Manager, TBD Job Description Questionnaire (JDQ) Professional Staff Instructions What with a disability in regard to job application procedures, the hiring or discharge of employees, employee Below to Certify Approval or Disapproval: Approval Disapproval ( ) ( ) TBD, Project Manager

Barrash, Warren

179

Creation of Computer Animation from Story Descriptions  

E-Print Network [OSTI]

This report describes a computer system that creates simple computer animation in response to high-level, vague, and incomplete descriptions of films. It makes its films by collecting and evaluating suggestions from ...

Kahn, Kenneth Michael

1979-08-01T23:59:59.000Z

180

COURSE TITLES COURSE DESCRIPTIONS Organizational Behavior &  

E-Print Network [OSTI]

COURSE TITLES COURSE DESCRIPTIONS MGT 5371 Organizational Behavior & Organizational Design Examines management of individual, interpersonal, group and intergroup relations, organizational design and experiential learning to accelerate their development as authentic leaders. MGT 5373 Opportunity Creation

Rock, Chris

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Building English Explanations from Function Descriptions  

E-Print Network [OSTI]

An explanatory component is an important ingredient in any complex AI system. A simple generative scheme to build descriptive phrases from Lisp function calls can produce respectable explanations if explanation generators ...

Roberts, Bruce

182

CANISTER TRANSFER SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The Canister Transfer System receives transportation casks containing large and small disposable canisters, unloads the canisters from the casks, stores the canisters as required, loads them into disposal containers (DCs), and prepares the empty casks for re-shipment. Cask unloading begins with cask inspection, sampling, and lid bolt removal operations. The cask lids are removed and the canisters are unloaded. Small canisters are loaded directly into a DC, or are stored until enough canisters are available to fill a DC. Large canisters are loaded directly into a DC. Transportation casks and related components are decontaminated as required, and empty casks are prepared for re-shipment. One independent, remotely operated canister transfer line is provided in the Waste Handling Building System. The canister transfer line consists of a Cask Transport System, Cask Preparation System, Canister Handling System, Disposal Container Transport System, an off-normal canister handling cell with a transfer tunnel connecting the two cells, and Control and Tracking System. The Canister Transfer System operating sequence begins with moving transportation casks to the cask preparation area with the Cask Transport System. The Cask Preparation System prepares the cask for unloading and consists of cask preparation manipulator, cask inspection and sampling equipment, and decontamination equipment. The Canister Handling System unloads the canister(s) and places them into a DC. Handling equipment consists of a bridge crane hoist, DC loading manipulator, lifting fixtures, and small canister staging racks. Once the cask has been unloaded, the Cask Preparation System decontaminates the cask exterior and returns it to the Carrier/Cask Handling System via the Cask Transport System. After the DC is fully loaded, the Disposal Container Transport System moves the DC to the Disposal Container Handling System for welding. To handle off-normal canisters, a separate off-normal canister handling cell is located adjacent to the canister transfer cell and is interconnected to the transfer cell by means of the off-normal canister transfer tunnel. All canister transfer operations are controlled by the Control and Tracking System. The system interfaces with the Carrier/Cask Handling System for incoming and outgoing transportation casks. The system also interfaces with the Disposal Container Handling System, which prepares the DC for loading and subsequently seals the loaded DC. The system support interfaces are the Waste Handling Building System and other internal Waste Handling Building (WHB) support systems.

B. Gorpani

2000-06-23T23:59:59.000Z

183

Don de MR H. BREUIL DESCRIPTION  

E-Print Network [OSTI]

Don de MR H. BREUIL DESCRIPTION D UN SQUELETTE HUMAIN PHEHISTOHIOUE U ['COU Y BUT A ANTHY, près de O R R A Z ET Cio ITUT 3GIE 1U05 · . · r.6o. #12;DESCRIPTION · r SQUELETTE HUMAIN PR�HISTORIQUE à l'époque litcuslre. Voilà 1rs quelques renseignements qu'on m'a communiqués à ce sujet : En

Boyer, Edmond

184

The shape dynamics description of gravity  

E-Print Network [OSTI]

Classical gravity can be described as a relational dynamical system without ever appealing to spacetime or its geometry. This description is the so-called shape dynamics description of gravity. The existence of relational first principles from which the shape dynamics description of gravity can be derived is a motivation to consider shape dynamics (rather than GR) as the fundamental description of gravity. Adopting this point of view leads to the question: What is the role of spacetime in the shape dynamics description of gravity? This question contains many aspects: Compatibility of shape dynamics with the description of gravity in terms of spacetime geometry, the role of local Minkowski space, universality of spacetime geometry and the nature of quantum particles, which can no longer be assumed to be irreducible representations of the Poincare group. In this contribution I derive effective spacetime structures by considering how matter fluctuations evolve along with shape dynamics. This evolution reveals an "experienced spacetime geometry." This leads (in an idealized approximation) to local Minkowski space and causal relations. The small scale structure of the emergent geometric picture depends on the specific probes used to experience spacetime, which limits the applicability of effective spacetime to describe shape dynamics. I conclude with discussing the nature of quantum fluctuations (particles) in shape dynamics and how local Minkowski spacetime emerges from the evolution of quantum particles.

Tim Koslowski

2015-01-13T23:59:59.000Z

185

Used Oil, Antifreeze, and Car Battery Recycling in Centre County* Location Used Oil Used Antifreeze Car Batteries  

E-Print Network [OSTI]

Used Oil, Antifreeze, and Car Battery Recycling in Centre County* Location Used Oil Used Antifreeze) 237-0121 Yes No No #12;Location Used Oil Used Antifreeze Car Batteries Valvoline Instant Oil Change-9929 Yes Yes Yes * See the DEP website, www.dep.state.pa.us/cgi_apps/oil, for used oil recycling locations

Maroncelli, Mark

186

Origin State Destination State  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

7. Estimated truck transportation rates for coal, state to state, EIA data Origin State Destination State 2008 2009 2010 2008-2010 2009-2010 Alabama Alabama W W W W W Alabama...

187

Locating and tracking assets using RFID  

E-Print Network [OSTI]

. In this research, we will focus on how to ?nd the location of an item by using RFID in real time indoors to track equipment. When an item needs to be located, the purpose of using RFID is to minimize the searching time, e?ort, and investment cost. Thus...

Kim, Gak Gyu

2009-05-15T23:59:59.000Z

188

RECYCLING PROGRAM TYPE LOCATION ALLOWED NOT ALLOWED  

E-Print Network [OSTI]

RECYCLING PROGRAM TYPE LOCATION ALLOWED NOT ALLOWED Batteries, toner, ink cartridges & cell phones and recycling is an important part of that effort. Below is a guide to on-campus recycling at RSMAS: Visit http://www.rsmas.miami.edu/msgso/ for map of recycling bin locations. NOTE: This is not an exhaustive list. If unauthorized items are found

Miami, University of

189

Location Privacy and the Personal Distributed Environment  

E-Print Network [OSTI]

Location Privacy and the Personal Distributed Environment Robert C Atkinson, Swee Keow Goo, James-- The Personal Distributed Environment is a new concept being developed within the Mobile VCE Core 3 research, wherever their location: ubiquitous access. Devices are co-ordinated by Device Management Entities (DMEs

Atkinson, Robert C

190

NAME: Sears Point Tidal Restoration Project LOCATION: Near Petaluma, CA, in the San Pablo Bay and Tolay Creek Watersheds  

E-Print Network [OSTI]

of estuarine habitat comprised of deep and shallow water habitat, mudflats, salt marsh, and wetlandNAME: Sears Point Tidal Restoration Project LOCATION: Near Petaluma, CA, in the San Pablo Bay PROJECT DESCRIPTION: Sears Point, the proposed project site, consists of approximately 960 acres of diked

US Army Corps of Engineers

191

Probing Emissions of Military Cargo Aircraft: Description of...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Emissions of Military Cargo Aircraft: Description of a Joint Field Measurement Strategic Environmental Research and Probing Emissions of Military Cargo Aircraft: Description of a...

192

Cold Vacuum Drying Facility Crane and Hoist System Design Description (SYS 14)  

SciTech Connect (OSTI)

This system design description (SDD) is for the Cold Vacuum Drying (CVD) Facility overhead crane and hoist system. The overhead crane and hoist system is a general service system. It is located in the process bays of the CVD Facility, supports the processes required to drain the water and dry the spent nuclear fuel (SNF) contained in the multi-canister overpacks (MCOs) after they have been removed from the K-Basins. The location of the system in the process bay is shown.

TRAN, Y.S.

2000-06-07T23:59:59.000Z

193

SFSU Building Coordinators List College or Administrative Unit Location(s)  

E-Print Network [OSTI]

SFSU Building Coordinators List College or Administrative Unit Location(s) Building Coordinator81193 cathym@sfsu.edu GYM 102B Student Services Building SSB Mirel Tikkanen x53566 mtikkane@sfsu.edu SSB

194

Method of locating underground mines fires  

DOE Patents [OSTI]

An improved method of locating an underground mine fire by comparing the pattern of measured combustion product arrival times at detector locations with a real time computer-generated array of simulated patterns. A number of electronic fire detection devices are linked thru telemetry to a control station on the surface. The mine's ventilation is modeled on a digital computer using network analysis software. The time reguired to locate a fire consists of the time required to model the mines' ventilation, generate the arrival time array, scan the array, and to match measured arrival time patterns to the simulated patterns.

Laage, Linneas (Eagam, MN); Pomroy, William (St. Paul, MN)

1992-01-01T23:59:59.000Z

195

The Value of Flexibility in Robust Location-Transportation Problem  

E-Print Network [OSTI]

production and distribution of products can be delayed until actual orders are ... such as hub locations, supplier locations, air freight hub locations, railway station

2014-11-24T23:59:59.000Z

196

SURFACE INDUSTRIAL HVAC SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this system description document (SDD) is to establish requirements that drive the design of the surface industrial heating, ventilation, and air-conditioning (HVAC) system and its bases to allow the design effort to proceed to license application. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. The SDD follows the design with regard to the description of the system. The description that provided in this SDD reflects the current results of the design process.

M.M. Ansari

2005-04-05T23:59:59.000Z

197

Addressing endogeneity in residential location models  

E-Print Network [OSTI]

Some empirical residential location choice models have reported dwelling-unit price estimated parameters that are small, not statistically significant, or even positive. This would imply that households are non-sensitive ...

Guevara-Cue, Cristián Angelo

2005-01-01T23:59:59.000Z

198

Developing a theory of nightclub location choice  

E-Print Network [OSTI]

This work is an investigation of the factors that influence where nightclubs locate within a city. Nightclubs, like other social spaces, provide important social and economic benefits in the urban environment. As amenities, ...

Crim, Stephen J. (Stephen Johnson)

2008-01-01T23:59:59.000Z

199

THE PLANAR HUB LOCATION PROBLEM: A PROBABILISTIC ...  

E-Print Network [OSTI]

Nov 5, 2012 ... Aykin and Brown, [4]. ...... [8] J.F. Campbell, Integer programming formulations of discrete hub location problems, European J. of O.R.. 72(1994) ...

2012-11-21T23:59:59.000Z

200

Personal Digital Assistant PDA ----Location Based  

E-Print Network [OSTI]

, xur],[ ybl, yur ]) k k=100 K k k- AminAmin kLk k Amax TmaxTmax kAminLocation Anonymization ConstraintsAmax TmaxLocation Service Quality Constraints 3.3 3.3.1 id, loc, query id loc (x,y)query GPS / l- l- k- l- k l- l l- l- m-invariant 2 29 #12;[22] A B C D E F R1 R2 R3 6 Outlier 6

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Environmental site description for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant at the Paducah Gaseous Diffusion Plant site  

SciTech Connect (OSTI)

Uranium enrichment in the United States has utilized a diffusion process to preferentially enrich the U-235 isotope in the uranium product. The U-AVLIS process is based on electrostatic extraction of photoionized U-235 atoms from an atomic vapor stream created by electron-beam vaporization of uranium metal alloy. The U-235 atoms are ionized when precisely tuned laser light -- of appropriate power, spectral, and temporal characteristics -- illuminates the uranium vapor and selectively photoionizes the U-235 isotope. A programmatic document for use in screening DOE site to locate a U-AVLIS production plant was developed and implemented in two parts. The first part consisted of a series of screening analyses, based on exclusionary and other criteria, that identified a reasonable number of candidate sites. These sites were subjected to a more rigorous and detailed comparative analysis for the purpose of developing a short list of reasonable alternative sites for later environmental examination. This environmental site description (ESD) provides a detailed description of the PGDP site and vicinity suitable for use in an environmental impact statement (EIS). The report is based on existing literature, data collected at the site, and information collected by Argonne National Laboratory (ANL) staff during a site visit. 65 refs., 15 tabs.

Marmer, G.J.; Dunn, C.P.; Moeller, K.L.; Pfingston, J.M.; Policastro, A.J.; Yuen, C.R.; Cleland, J.H. (ed.)

1991-09-01T23:59:59.000Z

202

Description of the RDCDS Meteorological Component  

SciTech Connect (OSTI)

This report provides a detailed description of the Rapidly Deployable Chemical Defense System (RDCDS) Meteorological Component. The Meteorological Component includes four surface meteorological stations, miniSODAR, laptop computers, and communications equipment. This report describes the equipment that is used, explains the operation of the network, and gives instructions for setting up the Component and replacing defective parts. A detailed description of operation and use of the individual sensors, including the data loggers is not covered in the current document, and the interested reader should refer to the manufacturer’s documentation.

Pekour, Mikhail S.; Berg, Larry K.

2007-10-01T23:59:59.000Z

203

WRAP Module 1 data management system (DMS) software design description (SDD)  

SciTech Connect (OSTI)

Revision 2 of the Waste Receiving and Processing (WRAP) Module 1 Data Management System (DMS) Preliminary Software Design Description (PSDD) provides a high-level design description of the system. The WRAP 1 DMS is required to collect, store, and report data related to certification, tracking, packaging, repackaging, processing, and shipment of waste processed or stored at the WRAP 1 facility. The WRAP 1 DMS SDD is used as the primary medium for communication software design information. This release provides design descriptions for the following process modules produced under Phase 1 of the development effort: Receiving Drum or Box Containers Process Routing and Picklists; Waste Inventory by Location and/or Container Relationships; LLW Process Glovebox Facility Radiologic Material Inventory Check (partial); Shipping (partial production); Drum or Box NDE Operations; and Drum or Box NDA Operations Data Review (partial production). In addition, design descriptions are included for the following process modules scheduled for development under Phases 2 and 3: Activity Comment; LLW RWM Glovebox Sample Management; TRU Process Glovebox; TRU RWM Glovebox; and TRUPACT Processing. Detailed design descriptions for Reports and Facility Metrics have also been provided for in Revision 2 of this document.

Weidert, J.R. [Westinghouse Hanford Co., Richland, WA (United States)

1996-05-13T23:59:59.000Z

204

Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER  

E-Print Network [OSTI]

Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER Subject Description Monday, July AND INSURANCE 242 ACTUARIAL SCIENCE 243 TRANSPORTATION AND PUBLIC UTILITIES 244 CLASSICS 250 COMMUNICATION ARTS;Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER Subject Description Monday, July 14, 2014

Wisconsin at Madison, University of

205

Standard-C hydrogen monitoring system, system design description  

SciTech Connect (OSTI)

Standard-C cabinet arrangement system design description for the Standard Hydrogen Monitoring System.

Schneider, T.C., Westinghouse Hanford

1996-08-29T23:59:59.000Z

206

RIS-M-2271 DESCRIPTION OF A SIMULATION SYSTEM DYSIM FOR CONTINUOUS  

E-Print Network [OSTI]

;FORTRAN; NUCLEAR POWER PLANTS; STEADY-STATE CONDITIONS; TRANSIENTS UDC 621.039.5 : 681.3.06 January 1981 Risø for simulation of nuclear reactors and plant com- ponents. Several minor modifications have been done to adaptRIS�-M-2271 DESCRIPTION OF A SIMULATION SYSTEM DYSIM FOR CONTINUOUS DYNAMIC PROCESSES P. la Cour

207

Nonlinear Trellis Description for Convolutionally Encoded Transmission Over ISI-channels with Applications for CPM  

E-Print Network [OSTI]

In this paper we propose a matched decoding scheme for convolutionally encoded transmission over intersymbol interference (ISI) channels and devise a nonlinear trellis description. As an application we show that for coded continuous phase modulation (CPM) using a non-coherent receiver the number of states of the super trellis can be significantly reduced by means of a matched non-linear trellis encoder.

Schuh, Fabian

2012-01-01T23:59:59.000Z

208

A radiation transport coupled particle-in-cell simulation. I. Description of the model  

E-Print Network [OSTI]

A radiation transport coupled particle-in-cell simulation. I. Description of the model Hae June-dimensional radiation transport model is coupled with a particle-in-cell simulation in order to incorporate such as ground, radiative, and metastable state atoms are treated with a fluid model combined with the Holstein

Lee, Hae June

209

Prevalence of Unmet Health Care Needs and Description of Health Careseeking Behavior Among  

E-Print Network [OSTI]

Prevalence of Unmet Health Care Needs and Description of Health Care­seeking Behavior Among in the state's history. This study aims to identify unmet medical needs and health care­seeking patterns covered demographics; needs following the wildfires (shelter, food, water, and health care); acute health

Scharfstein, Daniel

210

EEL 4712 Digital Design 1. Catalog Description (3 credits) Advanced modular logic design, design languages,  

E-Print Network [OSTI]

EEL 4712 Digital Design 1. Catalog Description ­ (3 credits) Advanced modular logic design, design systems, using the state of the art technologies and design environments and tools. 4. Contribution containing an Altera Cyclone II EP2C8T144C8 FPGA (will be provided to you, included in lab fee) 13

Fang, Yuguang "Michael"

211

MATLAB Quick Guide Name Description Example  

E-Print Network [OSTI]

MATLAB Quick Guide Symbol/ Command Name Description Example help help Help menu for any command or symbol in MATLAB Help : Help sum % comment MATLAB comment symbol; MATLAB will skip any line beginning for multiplication a = 5 * 5 ; / divide Symbol for division b = 5 / 1 ; ; semi-colon (1) Tells MATLAB to suppress

Smith-Konter, Bridget

212

WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED,  

E-Print Network [OSTI]

DESCRIPTION DETAILS * Radioactive Waste Source Reduction 1,500 Radioactive Waste $6,000 $2,500 $6,000 Waste Yard Sorting Table surveying to sort clean waste from radioactive waste Radioactive Emissions Emission lives. Radioactive Waste generated through wet chemistry Waste Minimization 30 Mixed waste / Liquid

213

Network architecture functional description and design  

SciTech Connect (OSTI)

This report provides a top level functional description and design for the development and implementation of the central network to support the next generation of SNL, Albuquerque supercomputer in a UNIX{reg sign} environment. It describes the network functions and provides an architecture and topology.

Stans, L.; Bencoe, M.; Brown, D.; Kelly, S.; Pierson, L.; Schaldach, C.

1989-05-25T23:59:59.000Z

214

COMMUNITY ADVISOR JOB DESCRIPTION General Statement  

E-Print Network [OSTI]

COMMUNITY ADVISOR JOB DESCRIPTION General Statement Community Advisors are members for their area and the Head Resident. Community Advisors are responsible for meeting the needs of their woodframe is beyond a Community Advisor's level of comfort and competence and refer students to as many resources

Royer, Dana

215

Resident Advisor Position Description Occupational Summary  

E-Print Network [OSTI]

Resident Advisor Position Description Occupational Summary The Resident Advisor (RA) is assigned and Residence Hall policies. The Resident Advisor provides programming based on an assessment of the community and individual needs. The responsibilities of the Resident Advisor position are implemented under the supervision

Bogaerts, Steven

216

Community Advisor Position Description Occupational Summary  

E-Print Network [OSTI]

Community Advisor Position Description Occupational Summary The Community Advisor (CA) is a full success; personal growth; and responsible citizenship. Terms of Appointment The Community Advisor position Monday, May 12, 2014 (5:00pm). Eligibility The Community Advisor must be a full-time student

Bogaerts, Steven

217

FACULTY OF ENGINEERING MODULE DESCRIPTION FORM  

E-Print Network [OSTI]

FACULTY OF ENGINEERING MODULE DESCRIPTION FORM CODE CL508/906 Site Investigation & Risk Assessment-86017-578-2 CIRIA C557 Remedial engineering for closed landfill sites D L Barry, I M Summersgill, R G Gregory et al Module Registrar: Dr P Sentenac Taught To (Course): Civil Engineering Other Lecturers Involved: Credit

Mottram, Nigel

218

EGGN 100 -INTRODUCTION TO ENGINEERING COURSE DESCRIPTION  

E-Print Network [OSTI]

Engineering design project - Continued Week 13 Field Trip to an Engineering site Project reviews, demosEGGN 100 - INTRODUCTION TO ENGINEERING COURSE DESCRIPTION Introduction to engineering disciplines and their sub-fields, basic tools used in engineering practice, hands-on engineering projects. COURSE OBJECTIVE

de Lijser, Peter

219

Sustainable Energy Scheme Mentor Job description  

E-Print Network [OSTI]

1 Sustainable Energy Scheme Mentor Job description Department: Student Administration and Registry and agreement between the Sustainable Energy Scheme Mentor and the UK Student Recruitment and Outreach Team Sustainable Energy Scheme · To participate in both on and off campus mentoring activities throughout

Anderson, Jim

220

Fall 2013 Course Descriptions: For Education Majors  

E-Print Network [OSTI]

will examine how and why pre-modern people distinguished themselves from their neighbors, as Greek/Roman vs, science, and technology. 115 Pre-Modern Course Descriptions: 12053 HIST 115 01 Us vs. Them Constructing Identities in the Pre -Modern World TR 03:05 pm-04:20 pm Buchberger MYBK 302 How we define who we are

Young, Paul Thomas

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Interns for Indiana (IFI) Project descriptions  

E-Print Network [OSTI]

with the company after graduation, which allows him to work on cutting edge projects, aid in company growthInterns for Indiana (IFI) Projects Project descriptions: · Software development, database design analysis Past student project Development of animated graphics for web portal and product demos -Kevin

222

Towards A Mathematical Services Description Olga Caprotti  

E-Print Network [OSTI]

Towards A Mathematical Services Description Language Olga Caprotti Wolfgang Schreiner Research Introduction In the recent years, mathematical software systems, i.e., computer algebra systems like Maple. There are numerous examples in the literature of scien- ti#12;c software needing access to computer algebra methods

223

RECENTER -ADVERSITY INTO TRANSFORMATION Course Description  

E-Print Network [OSTI]

Center" delivers power tools and real time strategies for creating performance transformation ­ no matter what and practical system for transforming your communication skills from the inside and outside. · Use real timeRECENTER - ADVERSITY INTO TRANSFORMATION Course Description: Knowing how to use adversity

Coles, William A.

224

EES 110: Earth Systems Course Description  

E-Print Network [OSTI]

of energy come from? The course includes laboratory exercises that cover map reading skills, rockEES 110: Earth Systems Course Description: This course examines some of the basic processes (held during normal laboratory meeting times): 1. Rocks & Minerals of Upstate SC: A chance to explore

225

Automatic TLI recognition system, general description  

SciTech Connect (OSTI)

This report is a general description of an automatic target recognition system developed at the Idaho National Engineering Laboratory for the Department of Energy. A user`s manual is a separate volume, Automatic TLI Recognition System, User`s Guide, and a programmer`s manual is Automatic TLI Recognition System, Programmer`s Guide. This system was designed as an automatic target recognition system for fast screening of large amounts of multi-sensor image data, based on low-cost parallel processors. This system naturally incorporates image data fusion, and it gives uncertainty estimates. It is relatively low cost, compact, and transportable. The software is easily enhanced to expand the system`s capabilities, and the hardware is easily expandable to increase the system`s speed. In addition to its primary function as a trainable target recognition system, this is also a versatile, general-purpose tool for image manipulation and analysis, which can be either keyboard-driven or script-driven. This report includes descriptions of three variants of the computer hardware, a description of the mathematical basis if the training process, and a description with examples of the system capabilities.

Lassahn, G.D.

1997-02-01T23:59:59.000Z

226

STUDENT LABOR POSITION DESCRIPTION Forestry Department  

E-Print Network [OSTI]

approved STUDENT LABOR POSITION DESCRIPTION Forestry Department Most Recently Updated 10/17/00 Position Title: Student Forestry Technician Must work 10 hrs/wk. or 15 hrs/wk (depending on grade). I. The following are the essential duties for a Forestry Technician in the Forestry Department: 1. Supervise other

Baltisberger, Jay H.

227

The Genetive and Ablative of Description  

E-Print Network [OSTI]

had not yet become a com­ mon descriptive case. The statistics for the nouns in Cicero are based on Merguet; those in Tacitus, on Gerber and Greef, Abl. Gen, Abl. Gen. Abl. Gen in in in in in in earlyearlyCfcc--Cic­ Tac­ Tac Latin ero ero itus...

Cressman, Edmund Dresser

1911-06-01T23:59:59.000Z

228

Business Development Associate -1493 Job Description  

E-Print Network [OSTI]

Business Development Associate - 1493 Job Description: BioTechnique is a contract manufacturing our Business Development efforts. This will offer a start-up environment, with hands-on opportunities with business development in our consulting, software and investments departments. These new graduates

Evans, Paul G.

229

Business of Fashion Concentration & Minor -Newark Description  

E-Print Network [OSTI]

Business of Fashion Concentration & Minor - Newark Description The Business of Fashion program was designed to bridge the gap between creativity and business acumen. It is for artistic individuals who want to solidify their understanding of business, as well as for business students who want to learn how to apply

Lin, Xiaodong

230

WARREN RESIDENTIAL LIFE RESIDENT ASSISTANT POSITION DESCRIPTION  

E-Print Network [OSTI]

WARREN RESIDENTIAL LIFE RESIDENT ASSISTANT POSITION DESCRIPTION The position of Resident Assistant for students living within the Warren College residential community. Resident Assistant's (RA's) are principle members of the Warren Residential Life staff. In accordance with the University of California's Personnel

Russell, Lynn

231

WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED,  

E-Print Network [OSTI]

WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED, REUSED, RECYCLED OR CONSERVED IN 2004 WASTE TYPE Brake Cleaner Recycling System Mercury Utility Devices Substitution 60 Hazardous Waste $1,750 $2,500 $1 of one PCB spill and clean-up event. Organic Solvents Substitution 678 Hazardous Waste $1,355 $36,500 $26

232

The Ideal Transformer Description and Circuit Symbol  

E-Print Network [OSTI]

The Ideal Transformer Description and Circuit Symbol As with all the other circuit elements, there is a physical transformer commonly used in circuits whose behavior can be discussed in great detail. However, in many cases the practical transformer can be adequately approximated by the "ideal transformer," which

King, Roger

233

Position Description Website and Video Coordinator  

E-Print Network [OSTI]

, feature content that supports the School's mission and employs best practices (i.e. chunking content, short pages, bulleted list, etc.); follow best practices with search engine optimization; creating clearPosition Description Website and Video Coordinator School of Global Environmental Sustainability

Barnes, Elizabeth A.

234

System design description cone penetrometer system  

SciTech Connect (OSTI)

The system design description documents in detail the design of the cone penetrometer system. The systems includes the cone penetrometer physical package, raman spectroscopy package and moisture sensor package. Information pertinent to the system design, development, fabrication and testing is provided.

Seda, R.Y., Westinghouse Hanford

1996-08-12T23:59:59.000Z

235

Environmental site description for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant at the Portsmouth Gaseous Diffusion Plant site  

SciTech Connect (OSTI)

Uranium enrichment in the United States has utilized a diffusion process to preferentially enrich the U-235 isotope in the uranium product. In the 1970s, the US Department of Energy (DOE) began investigating more efficient and cost-effective enrichment technologies. In January 1990, the Secretary of Energy approved a plan for the demonstration and deployment of the Uranium Atomic Vapor Laser isotope Separation (U-AVLIS) technology with the near-term goal to provide the necessary information to make a deployment decision by November 1992. Initial facility operation is anticipated for 1999. A programmatic document for use in screening DOE sites to locate a U-AVLIS production plant was developed and implemented in two parts. The first part consisted of a series of screening analyses, based on exclusionary and other criteria, that identified a reasonable number of candidate sites. The final evaluation, which included sensitivity studies, identified the Oak Ridge Gaseous Diffusion Plant (ORGDP) site, the Paducah Gaseous Diffusion Plant (PGDP) site, and the Portsmouth Gaseous Diffusion Plant (PORTS) site as having significant advantages over the other sites considered. This environmental site description (ESD) provides a detailed description of the PORTS site and vicinity suitable for use in an environmental impact statement (EIS). This report is based on existing literature, data collected at the site, and information collected by Argonne National Laboratory (ANL) staff during site visits. The organization of the ESD is as follows. Topics addressed in Sec. 2 include a general site description and the disciplines of geology, water resources, biotic resources, air resources, noise, cultural resources, land use. Socioeconomics, and waste management. Identification of any additional data that would be required for an EIS is presented in Sec. 3.

Marmer, G.J.; Dunn, C.P.; Filley, T.H.; Moeller, K.L.; Pfingston, J.M.; Policastro, A.J.; Cleland, J.H.

1991-09-01T23:59:59.000Z

236

NC State Office of Information Technology PURCHASE REQUEST FORM  

E-Print Network [OSTI]

NC State Office of Information Technology PURCHASE REQUEST FORM Voucher #: Req #: PO#: Other: SHIP North Carolina State University Office of Information Technology Office of Information Technology Campus Quantity Product Description Unit Price Extended Price _______PLEASE RUSH Small Purchase Shipping

Liu, Paul

237

Qualifying RPS State Export Markets (Massachusetts)  

Broader source: Energy.gov [DOE]

This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Massachusetts as eligible sources towards their RPS targets or goals. For specific...

238

Qualifying RPS State Export Markets (Oklahoma)  

Broader source: Energy.gov [DOE]

This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Oklahoma as eligible sources towards their RPS targets or goals. For specific...

239

Qualifying RPS State Export Markets (Illinois)  

Broader source: Energy.gov [DOE]

This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Illinois as eligible sources towards their RPS targets or goals. For specific...

240

Qualifying RPS Market States (Saskatchewan, Canada)  

Broader source: Energy.gov [DOE]

This entry lists the states with RPS policies that accept generation located in Saskatchewan, Canada as eligible sources towards their Renewable Portfolio Standard targets or goals. For specific...

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Qualifying RPS Market States (Ontario, Canada)  

Broader source: Energy.gov [DOE]

This entry lists the states with RPS policies that accept generation located in Ontario, Canada as eligible sources towards their Renewable Portfolio Standard targets or goals. For specific...

242

Qualifying RPS Market States (Manitoba, Canada)  

Broader source: Energy.gov [DOE]

This entry lists the states with RPS policies that accept generation located in Manitoba, Canada as eligible sources towards their Renewable Portfolio Standard targets or goals. For specific...

243

Qualifying RPS Market States (Quebec, Canada)  

Broader source: Energy.gov [DOE]

This entry lists the states with RPS policies that accept generation located in Quebec, Canada as eligible sources towards their Renewable Portfolio Standard targets or goals. For specific...

244

Qualifying RPS State Export Markets (Kansas)  

Broader source: Energy.gov [DOE]

This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Kansas as eligible sources towards their RPS targets or goals. For specific...

245

Qualifying RPS State Export Markets (Arkansas)  

Broader source: Energy.gov [DOE]

This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Arkansas as eligible sources towards their RPS targets or goals. For specific...

246

Qualifying RPS State Export Markets (Kentucky)  

Broader source: Energy.gov [DOE]

This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Kentucky as eligible sources towards their RPS targets or goals. For specific...

247

Qualifying RPS State Export Markets (Michigan)  

Broader source: Energy.gov [DOE]

This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Michigan as eligible sources towards their RPS targets or goals. For specific...

248

Boise State University Graduate Catalog  

E-Print Network [OSTI]

for the State of Idaho and for you, the students, who enroll in its programs. Graduate education at Boise State. Boise State is located within the largest metropolitan area of Idaho and attracts more than one million, and for other education or allied agencies. Catalogs, bulletins, course and fee schedules, etc

Barrash, Warren

249

Driver expectancy in locating automotive controls  

E-Print Network [OSTI]

of the dimmer switch 150 3 lb Effect of age on expected location of the dimmer switch 150 31c Effect of years of driving experience on expected location of the dimmer switch. 151 31d Effect of miles driven in the past year on expected location... IOO. C Sn. i 36. 2 8/. 5 80. 0 87. 5 A=/0. 0 ZD. D 50. 0 0. 0 /0 D 12 5 2D. O 30. 0 0. 0 80. 0 80. 0 62 IDD. O 100. 0 10[. 0 Bn. o o. o 7. 5 20. 0 40. 0 37'. 5 85. 0 23 3 17. 5 16. / 74. 2 42. 5 SZ. 5 Climate C ntrol 17. 2 43. 0 36...

Francis, Dawn Suzette

1990-01-01T23:59:59.000Z

250

Leak locating microphone, method and system for locating fluid leaks in pipes  

DOE Patents [OSTI]

A leak detecting microphone inserted directly into fluid within a pipe includes a housing having a first end being inserted within the pipe and a second opposed end extending outside the pipe. A diaphragm is mounted within the first housing end and an acoustic transducer is coupled to the diaphragm for converting acoustical signals to electrical signals. A plurality of apertures are provided in the housing first end, the apertures located both above and below the diaphragm, whereby to equalize fluid pressure on either side of the diaphragm. A leak locating system and method are provided for locating fluid leaks within a pipe. A first microphone is installed within fluid in the pipe at a first selected location and sound is detected at the first location. A second microphone is installed within fluid in the pipe at a second selected location and sound is detected at the second location. A cross-correlation is identified between the detected sound at the first and second locations for identifying a leak location.

Kupperman, David S. (Oak Park, IL); Spevak, Lev (Highland Park, IL)

1994-01-01T23:59:59.000Z

251

Image description. Cover Image End of image description. NATIONAL CENTER FOR EDUCATION STATISTICS  

E-Print Network [OSTI]

a context for examining the data they submitted to IPEDS. Our goal is to produce a report that is useful University 2 #12;Image description. Bar chart with 10 groups with 2 items per group.Y scale titled Percent

Mohaghegh, Shahab

252

Time-Depentent Hartree-Fock description of heavy ions fusion  

E-Print Network [OSTI]

A microscopic mean-field description of heavy ions fusion is performed in the framework of the Time-Dependent Hartree-Fock (TDHF) theory using a Skyrme interaction with the SLy4d parametrization. A good agreement with experiments is obtained on the position of the fusion barriers for various total masses, mass asymmetries and deformations. The excitation function of the 16O+208Pb is overestimated by about 16% above the barrier. The restriction to an independent particles state in the mean-field dynamics prevents the description of sub-barrier fusion. Effect of transfer on fusion is discussed.

Cédric Simenel; Benoît Avez

2007-11-06T23:59:59.000Z

253

OPTIMAL LOCATION OF ISOLATION VALVES IN WATER  

E-Print Network [OSTI]

CHAPTER 7 OPTIMAL LOCATION OF ISOLATION VALVES IN WATER DISTRIBUTION SYSTEMS: A RELIABILITY systems to serve expanding population centers. Both the adaptation of existing technologies in water supply systems account for the largest cost item in future maintenance budgets. The aging

Mays, Larry W.

254

Recycling Bin Guide Locations and prices  

E-Print Network [OSTI]

Recycling Bin Guide Locations and prices Metal Bins Deskside Bins with Side Saddle Rubbermaid Bins.58 for auxiliaries. And Non-Public Areas Public Offices Non-Public Recyclables Recyclables RecyclablesTrash Trash Trash #12;New Recycling Bin Guidelines Frequently Asked Questions (as of December 2008) · Why

Kirschner, Denise

255

Exact Location : Date of Accident : AM PM  

E-Print Network [OSTI]

SSN Cell Phone Home Phone Work Phone Exact Location : Date of Accident : AM PM Date accident treatment provided? Yes No Where Was time lost from work? Yes No If yes, how long? Could this accident have the following information as soon as it relates to your work related accident/injury/illness within 72 hours

Swaddle, John

256

1993 baseline solid waste management system description  

SciTech Connect (OSTI)

Pacific Northwest Laboratory has prepared this report under the direction of Westinghouse Hanford Company. The report provides an integrated description of the system planned for managing Hanford`s solid low-level waste, low-level mixed waste, transuranic waste, and transuranic mixed waste. The primary purpose of this document is to illustrate a collective view of the key functions planned at the Hanford Site to handle existing waste inventories, as well as solid wastes that will be generated in the future. By viewing this system as a whole rather than as individual projects, key facility interactions and requirements are identified and a better understanding of the overall system may be gained. The system is described so as to form a basis for modeling the system at various levels of detail. Model results provide insight into issues such as facility capacity requirements, alternative system operating strategies, and impacts of system changes (ie., startup dates). This description of the planned Hanford solid waste processing system: defines a baseline system configuration; identifies the entering waste streams to be managed within the system; identifies basic system functions and waste flows; and highlights system constraints. This system description will evolve and be revised as issues are resolved, planning decisions are made, additional data are collected, and assumptions are tested and changed. Out of necessity, this document will also be revised and updated so that a documented system description, which reflects current system planning, is always available for use by engineers and managers. It does not provide any results generated from the many alternatives that will be modeled in the course of analyzing solid waste disposal options; such results will be provided in separate documents.

Armacost, L.L.; Fowler, R.A.; Konynenbelt, H.S.

1994-02-01T23:59:59.000Z

257

Property:Technology Description | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: EnergyPotentialUrbanUtilityScalePVCapacity Jump to: navigation,WebsiteRenewableBiofuelTechnology Description

258

Design of globally optimal multiple description scalar quantizers  

E-Print Network [OSTI]

This thesis investigates the design of globally optimal multiple description scalar quantizers. The design of multiple description scalar quantizers is formulated as a combinatorial optimization problem due to the index assignment issue. The first...

Desilva, Buveneka Kanishka

2012-06-07T23:59:59.000Z

259

VCSEL fault location apparatus and method  

DOE Patents [OSTI]

An apparatus for locating a fault within an optical fiber is disclosed. The apparatus, which can be formed as a part of a fiber-optic transmitter or as a stand-alone instrument, utilizes a vertical-cavity surface-emitting laser (VCSEL) to generate a test pulse of light which is coupled into an optical fiber under test. The VCSEL is subsequently reconfigured by changing a bias voltage thereto and is used as a resonant-cavity photodetector (RCPD) to detect a portion of the test light pulse which is reflected or scattered from any fault within the optical fiber. A time interval .DELTA.t between an instant in time when the test light pulse is generated and the time the reflected or scattered portion is detected can then be used to determine the location of the fault within the optical fiber.

Keeler, Gordon A. (Albuquerque, NM); Serkland, Darwin K. (Albuquerque, NM)

2007-05-15T23:59:59.000Z

260

Commodity/Vendor Purchasing Matrix Vendor Location  

E-Print Network [OSTI]

Commodity/Vendor Purchasing Matrix Commodity Vendor N am e and A ddress Vendor N am e in eVA Vendor sheets of paper and bring to business office for payment. Vendor Purchasing Matrix 090413 Page 1 of 4 #12;Commodity Vendor N am e and A ddress Vendor N am e in eVA Vendor Location in eVA PO C ategory eVA PO needed

Swaddle, John

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

SY101 in situ viscometer instrument system design description  

SciTech Connect (OSTI)

This documents the design and description of the in situ viscometer, developed for the hydrogen mitigation project.

Pearce, K.L.; Stokes, T.I.; Vagelatos, N.

1994-08-18T23:59:59.000Z

262

STEP Energy Coach and Technical Consultant Job Descriptions  

Broader source: Energy.gov [DOE]

STEP Energy Coach and Technical Consultant Job Descriptions, from the Tool Kit Framework: Small Town University Energy Program (STEP).

263

Nevada Test Site Environmental Report 2008 Attachment A: Site Description  

SciTech Connect (OSTI)

This attachment expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2008 (National Security Technologies, LLC [NSTec], 2009a). Included are subsections that summarize the site’s geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the site’s environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

Cathy A. Wills

2009-09-01T23:59:59.000Z

264

Nevada Test Site Environmental Report 2007 Attachment A: Site Description  

SciTech Connect (OSTI)

This appendix expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2007 (U.S. Department of Energy [DOE], 2008). Included are subsections that summarize the site's geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site which afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

Cathy Wills

2008-09-01T23:59:59.000Z

265

Nevada Test Site Environmental Report 2005, Attachment A - Site Description  

SciTech Connect (OSTI)

This appendix to the ''Nevada Test Site Environmental Report 2005'', dated October 2006 (DOE/NV/11718--1214; DOE/NV/25946--007) expands on the general description of the Nevada Test Site (NTS) presented in the Introduction. Included are subsections that summarize the site?s geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site which afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This appendix complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

Cathy A. Wills

2006-10-01T23:59:59.000Z

266

Recommendations for energy conservation standards for new residential buildings: Volume 4, Description of the testing process  

SciTech Connect (OSTI)

This report documents the development and testing of recommendations, from the American Society of Heating, Refrigeration and Air Conditioning Engineers, Inc. (ASHRAE) Special Projects Committee No. 53, designed to provide the technical foundation for the Congressionally-mandated energy standard for new residential buildings. The recommendations were developed over a 25-month period by a multidisciplinary project team, under the management of the US Department of Energy and its prime contractor, Pacific Northwest Laboratory. The report has been issued in four volumes, VOLUME IV - Description of the Testing Process details how the Standard was tested and provides case studies of the possible impact of the Standard in select locations throughout the country. It is supported by a description of the assumptions and input data, and an analysis of the results.

Not Available

1989-05-01T23:59:59.000Z

267

RESIDENTIAL LOCATION CHOICE AND TRAVEL BEHAVIOR: IMPLICATIONS FOR AIR QUALITY  

E-Print Network [OSTI]

RESIDENTIAL LOCATION CHOICE AND TRAVEL BEHAVIOR: IMPLICATIONS FOR AIR QUALITY UC Davis-Caltrans Air control measure. #12;RESIDENTIAL LOCATION CHOICE AND TRAVEL BEHAVIOR: IMPLICATIONS FOR AIR QUALITY.......................................................... 3 2.2 The Role of Residential Location Choice

Levinson, David M.

268

Incremental Machine Descriptions for GCC Sameera Deshpande Uday P. Khedker  

E-Print Network [OSTI]

Incremental Machine Descriptions for GCC Sameera Deshpande Uday P. Khedker Indian Institute of Technology, Bombay {sameera,uday}@cse.iitb.ac.in Abstract The mechanism of providing machine descriptions a GCC port exists. However, this mechanism is quite ad hoc and the machine descriptions are dif- ficult

Khedker, Uday

269

On the Hamiltonian Description of Fluid Mechanics  

E-Print Network [OSTI]

We suggest the Hamiltonian approach for fluid mechanics based on the dynamics, formulated in terms of Lagrangian variables. The construction of the canonical variables of the fluid sheds a light of the origin of Clebsh variables, introduced in the previous century. The developed formalism permits to relate the circulation conservation (Tompson theorem) with the invariance of the theory with respect to special diffiomorphisms and establish also the new conservation laws. We discuss also the difference of the Eulerian and Lagrangian description, pointing out the incompleteness of the first. The constructed formalism is also applicable for ideal plasma. We conclude with several remarks on the quantization of the fluid.

I. Antoniou; G. P. Pronko

2002-03-14T23:59:59.000Z

270

CULTIVAR DESCRIPTION CDC Kestrel winter wheat  

E-Print Network [OSTI]

of Saskatchewan, 51 Campus Drive, Saskatoon, Saskatchewan, Canada S7N 5A8. E-mail: Brian.Fowler@usask.ca. Received of Saskatchewan, Saskatoon, Saskatchewan. The Food Production and Inspection Branch of Agriculture and Agri- nomic performance of S86-15 was further evaluated in yield trials at six locations in Saskatchewan

Saskatchewan, University of

271

PARSII - New Reports and Reports With New Reporting Folder Location...  

Energy Savers [EERE]

- New Reports and Reports With New Reporting Folder Location More Documents & Publications PARSII - New Reports and Reports With New Reporting Folder Location Slide 1 Slide 1...

272

Location of laccase in ordered mesoporous materials  

SciTech Connect (OSTI)

The functionalization with amine groups was developed on the SBA-15, and its effect in the laccase immobilization was compared with that of a Periodic Mesoporous Aminosilica. A method to encapsulate the laccase in situ has now been developed. In this work, spherical aberration (C{sub s}) corrected scanning transmission electron microscopy combined with high angle annular dark field detector and electron energy loss spectroscopy were applied to identify the exact location of the enzyme in the matrix formed by the ordered mesoporous solids.

Mayoral, Álvaro [Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Edificio I - D, Mariano Esquillor, 50018 Zaragoza (Spain); Gascón, Victoria; Blanco, Rosa M.; Márquez-Álvarez, Carlos; Díaz, Isabel, E-mail: idiaz@icp.csic.es [Instituto de Catálisis y Petroleoquímica, CSIC, c/Marie Curie 2, 28049 Madrid (Spain)

2014-11-01T23:59:59.000Z

273

Property:UtilityLocation | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revisionEnvReviewNonInvasiveExploration JumpSanyalTempWellhead Jump to:TechnologyUtilityLocation Jump to:

274

Microsoft Word - DOE-ID-12-014 Alcorn State.doc  

Broader source: Energy.gov (indexed) [DOE]

A. Project Title: Developing the Currently Existing Nuclear Instrumentation and Radiation Research Laboratories at Alcorn State University SECTION B. Project Description The...

275

Microsoft Word - DOE-ID-12-020 Washington State.doc  

Broader source: Energy.gov (indexed) [DOE]

0 SECTION A. Project Title: Upgrading Lanthanide & Actinide Spectroscopy Capabilities at Washington State University SECTION B. Project Description The principle objective of this...

276

State DOT: California State Report Questions on NDT Testing  

E-Print Network [OSTI]

test for this purpose. For concrete pavement, California has used falling weight deflectometer (FWD locations within concrete pavement. 2. In your experience, how does the reliability of NDT testing methodsState DOT: California State Report Questions on NDT Testing 1. What NDT testing methods

277

INL Wind Farm Project Description Document  

SciTech Connect (OSTI)

The INL Wind Farm project proposes to install a 20 MW to 40 MW wind farm on government property, consisting of approximately ten to twenty full-sized (80-meter hub height) towers with 2 MW turbines, and access roads. This includes identifying the optimal turbine locations, building access roads, and pouring the tower foundations in preparation for turbine installation. The project successfully identified a location on INL lands with commercially viable wind resources (i.e., greater than 11 mph sustained winds) for a 20 to 40 MW wind farm. Additionally, the proposed Wind Farm was evaluated against other General Plant Projects, General Purpose Capital Equipment projects, and Line Item Construction Projects at the INL to show the relative importance of the proposed Wind Farm project.

Gary Siefert

2009-07-01T23:59:59.000Z

278

Investigation of the kinetics of protein folding and the ensemble of conformations in non-native states of proteins by liquid NMR spectroscopy  

E-Print Network [OSTI]

For a complete description of protein folding dynamics and the structure of the folded state, of unfolded and of non-native states of proteins and the kinetics of protein folding from the unfolded state to the folded state ...

Wirmer, Julia

2005-01-01T23:59:59.000Z

279

Location-Tracking Applications ecent technological advances in wireless loca-  

E-Print Network [OSTI]

areas they have visited. #12;Location-Tracking Applications broker as part of their service contract

Gruteser, Marco

280

Locating a Recycling Center: The General Density Case Jannett Highfill  

E-Print Network [OSTI]

Locating a Recycling Center: The General Density Case Jannett Highfill Department of Economics) 677-3374. #12;2 Locating a Recycling Center: The General Density Case Abstract: The present paper considers a municipality that has a landfill (fixed in location) and plans to optimally locate a "recycling

Mou, Libin

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

STATE ESTIMATION FOR WASTEWATER TREATMENT PROCESSES  

E-Print Network [OSTI]

CHAPTER 1 STATE ESTIMATION FOR WASTEWATER TREATMENT PROCESSES O. Bernard1 , B. Chachuat2 , and J sensors (also called observers) for wastewater treatment plants (WWTPs). We give an overview model description (e.g., the 1 #12;2 STATE ESTIMATION FOR WASTEWATER TREATMENT PROCESSES extended Kalman

Bernard, Olivier

282

Collective phase description of oscillatory convection  

SciTech Connect (OSTI)

We formulate a theory for the collective phase description of oscillatory convection in Hele-Shaw cells. It enables us to describe the dynamics of the oscillatory convection by a single degree of freedom which we call the collective phase. The theory can be considered as a phase reduction method for limit-cycle solutions in infinite-dimensional dynamical systems, namely, stable time-periodic solutions to partial differential equations, representing the oscillatory convection. We derive the phase sensitivity function, which quantifies the phase response of the oscillatory convection to weak perturbations applied at each spatial point, and analyze the phase synchronization between two weakly coupled Hele-Shaw cells exhibiting oscillatory convection on the basis of the derived phase equations.

Kawamura, Yoji, E-mail: ykawamura@jamstec.go.jp [Institute for Research on Earth Evolution, Japan Agency for Marine-Earth Science and Technology, Yokohama 236-0001 (Japan)] [Institute for Research on Earth Evolution, Japan Agency for Marine-Earth Science and Technology, Yokohama 236-0001 (Japan); Nakao, Hiroya [Department of Mechanical and Environmental Informatics, Tokyo Institute of Technology, Tokyo 152-8552 (Japan)] [Department of Mechanical and Environmental Informatics, Tokyo Institute of Technology, Tokyo 152-8552 (Japan)

2013-12-15T23:59:59.000Z

283

Monitored Geologic Repository Project Description Document  

SciTech Connect (OSTI)

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (CRWMS M&O 2000b) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) engineering design basis in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The engineering design basis documented in the PDD is to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the engineering design basis from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the engineering design basis captured in the SDDs and the design requirements captured in U.S. Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M&O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 2-1, the MGR Architecture (Section 4.1),the Engineering Design Bases (Section 5), and the Controlled Project Assumptions (Section 6).

P. Curry

2000-06-01T23:59:59.000Z

284

Monitored Geologic Repository Project Description Document  

SciTech Connect (OSTI)

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the Yucca Mountain Site Characterization Project Requirements Document (YMP RD) (YMP 2001a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M&O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).

P. Curry

2001-06-26T23:59:59.000Z

285

Monitored Geologic Repository Project Description Document  

SciTech Connect (OSTI)

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (YMP 2000a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).

P. M. Curry

2001-01-30T23:59:59.000Z

286

Tri-Met's Experience With Automatic Passenger Counter and Automatic Vehicle Location Systems  

E-Print Network [OSTI]

on an earlier draft. #12;Introduction The Tri-County Metropolitan Transportation District of Oregon (TriTri-Met's Experience With Automatic Passenger Counter and Automatic Vehicle Location Systems James State University Portland, OR 97207 This report is benefited from interviews of Tri-Met staff involved

Bertini, Robert L.

287

Residential Location Choice--a Search in the Mirror of the Past  

E-Print Network [OSTI]

Residential Location Choice--a Search in the Mirror of the Past Cynthia Chen University environment · Residential self-selection, but · What do we know about residential self- selection? ­ When · Behavioral studies · Life course research · Human memory· Human memory · The current state of residential

Bertini, Robert L.

288

Location Independent Professional Project: A Pilot Study  

SciTech Connect (OSTI)

This pilot study project explored the problem of providing access to the nomadic worker who desires to connect a computer through network access points at a number of different locations within the SNL/NM campus as well as outside the campus. The design and prototype development gathered knowledge that may allow a design to be developed that could be extended to a larger number of SNL/NM network drop boxes. The focus was to provide a capability for a worker to access the SNL IRN from a network drop box (e.g. in a conference room) as easily as when accessing the computer network from the office normally used by the worker. Additional study was done on new methods to authenticate the off campus worker, and protect and control access to data.

Hudson, J.A.; Long, J.P.; Miller, M.M.

1999-02-01T23:59:59.000Z

289

Locating hardware faults in a parallel computer  

DOE Patents [OSTI]

Locating hardware faults in a parallel computer, including defining within a tree network of the parallel computer two or more sets of non-overlapping test levels of compute nodes of the network that together include all the data communications links of the network, each non-overlapping test level comprising two or more adjacent tiers of the tree; defining test cells within each non-overlapping test level, each test cell comprising a subtree of the tree including a subtree root compute node and all descendant compute nodes of the subtree root compute node within a non-overlapping test level; performing, separately on each set of non-overlapping test levels, an uplink test on all test cells in a set of non-overlapping test levels; and performing, separately from the uplink tests and separately on each set of non-overlapping test levels, a downlink test on all test cells in a set of non-overlapping test levels.

Archer, Charles J.; Megerian, Mark G.; Ratterman, Joseph D.; Smith, Brian E.

2010-04-13T23:59:59.000Z

290

Water Quality Sampling Locations Along the Shoreline of the Columbia River, Hanford Site, Washington  

SciTech Connect (OSTI)

As environmental monitoring evolved on the Hanford Site, several different conventions were used to name or describe location information for various sampling sites along the Hanford Reach of the Columbia River. These methods range from handwritten descriptions in field notebooks to the use of modern electronic surveying equipment, such as Global Positioning System receivers. These diverse methods resulted in inconsistent archiving of analytical results in various electronic databases and published reports because of multiple names being used for the same site and inaccurate position data. This document provides listings of sampling sites that are associated with groundwater and river water sampling. The report identifies names and locations for sites associated with sampling: (a) near-river groundwater using aquifer sampling tubes; (b) riverbank springs and springs areas; (c) pore water collected from riverbed sediment; and (d) Columbia River water. Included in the listings are historical names used for a particular site and the best available geographic coordinates for the site, as of 2009. In an effort to create more consistency in the descriptive names used for water quality sampling sites, a naming convention is proposed in this document. The convention assumes that a unique identifier is assigned to each site that is monitored and that this identifier serves electronic database management requirements. The descriptive name is assigned for the convenience of the subsequent data user. As the historical database is used more intensively, this document may be revised as a consequence of discovering potential errors and also because of a need to gain consensus on the proposed naming convention for some water quality monitoring sites.

Peterson, Robert E.; Patton, Gregory W.

2009-12-14T23:59:59.000Z

291

DESCRIPTION OF THE THREEMILEROAD BRECCIA PIPE The breccia pipe is a 40-50 meter wide vertical pipe-shaped deposit that exhibits a sharp vertical contact  

E-Print Network [OSTI]

#12;DESCRIPTION OF THE THREEMILEROAD BRECCIA PIPE The breccia pipe is a 40-50 meter wide vertical pipe-shaped deposit that exhibits a sharp vertical contact with the host dolostoneand cuts all the stratigraphic levels exposed in the quarry (Fig. 2). The breccia pipe is located along a fracturezone that runs

Luczaj, John A.

292

A conformal field theory description of magnetic flux fractionalization in Josephson junction ladders  

E-Print Network [OSTI]

We show how the recently proposed effective theory for a Quantum Hall system at "paired states" filling v=1 (Mod. Phys. Lett. A 15 (2000) 1679; Nucl. Phys. B641 (2002) 547), the twisted model (TM), well adapts to describe the phenomenology of Josephson Junction ladders (JJL) in the presence of defects. In particular it is shown how naturally the phenomenon of flux fractionalization takes place in such a description and its relation with the discrete symmetries present in the TM. Furthermore we focus on closed geometries, which enable us to analyze the topological properties of the ground state of the system in relation to the presence of half flux quanta.

G. Cristofano; V. Marotta; A. Naddeo; G. Niccoli

2005-09-30T23:59:59.000Z

293

Property:Wavemaking Description | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revisionEnvReviewNonInvasiveExploration JumpSanyalTempWellhead Jump to:TechnologyUtilityLocation

294

MobiEyes: A Distributed Location Monitoring Service Using Moving Location Queries  

E-Print Network [OSTI]

, distributed algorithms, mobile data management. Ç 1 INTRODUCTION WITH the growing availability of mobile-sensitive resource management. The former uses location data to tailor the information delivered to the mobile users traffic and weather. Examples include systems for fleet manage- ment, mobile workforce management

Liu, Ling

295

Infrasound source location An automated method to estimate the location of infrasound sources  

E-Print Network [OSTI]

Waterstaat Delft University of Technology (DUT) Department of Earth Observation and Space Systems Acoustic Meteorologisch Instituut (KNMI) and three additional arrays located in Germany and France. The estimated source for a spherical earth. Extensive filtering is applied to clean the data from as much noise and signals from local

Evers, Läslo G.

296

Topological order and magnetic flux fractionalization in Josephson junction ladders with Mobius boundary conditions: a twisted CFT description  

E-Print Network [OSTI]

We propose a CFT description for a closed one-dimensional fully frustrated ladder of quantum Josephson junctions with Mobius boundary conditions (see cond-mat/0503555; we show how such a system can develop topological order thanks to flux fractionalization. Such a property is crucial for its implementation as a "protected" solid state qubit.

Gerardo Cristofano; Vincenzo Marotta; Adele Naddeo; Giuliano Niccoli

2005-07-25T23:59:59.000Z

297

assurance program description: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

workforce at LANL. DataImpacts LANL Funding: These Postdocs are paid from programmatic funding within 2 Program Description Queen's University Computer Technologies and...

298

STEP Energy Coach and Technical Consultant Job Descriptions ...  

Energy Savers [EERE]

Consultant Job Descriptions.pdf More Documents & Publications Technical Consultant RFP Tool Kit Framework: Small Town University Energy Program (STEP) Technical Consultant...

299

E-Print Network 3.0 - approximation descriptions microscopiques...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

de l'approximation locale. Ce calcul est entirement... :lpmmc.grenoble.cnrs.frspip.php?article404 Description : Les polaritons de cavit sont des quasiparticules hybrides...

300

June 1998Program Description Windows and Daylighting Group  

E-Print Network [OSTI]

June 1998Program Description THERM 2.0 Windows and Daylighting Group Building Technologies, and Dariush Arasteh Windows and Daylighting Group Building Technologies Department Environmental Energy

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Community College Institute (CCI) Program Description The Community...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Community College Institute (CCI) Program Description The Community College Internship (CCI) program seeks to encourage community college students to enter technical careers...

302

New Mexico Hydrogen Fuels Challenge Program Description The New...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

New Mexico Hydrogen Fuels Challenge Program Description The New Mexico Hydrogen Fuels Challenge is an event that provides a hands-on opportunity for middle school students (grades...

303

AHTR Refueling Systems and Process Description  

SciTech Connect (OSTI)

The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt–cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy’s Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published [1], and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the levels of maturity of the various SSCs to provide guidance for future technology developments. The conceptual design information presented in this report is very preliminary in nature. Significant uncertainty remains about several aspects of the process and even the radiation and mechanical performance of plate-type coated-particle fuel.

Varma, V.K.; Holcomb, D.E.; Bradley, E.C.; Zaharia, N.M.; Cooper, E.J.

2012-07-15T23:59:59.000Z

304

AHTR Refueling Systems and Process Description  

SciTech Connect (OSTI)

The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt-cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy's Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the levels of maturity of the various SSCs to provide guidance for future technology developments. The conceptual design information presented in this report is very preliminary in nature. Significant uncertainty remains about several aspects of the process and even the radiation and mechanical performance of plate-type coated-particle fuel.

Varma, Venugopal Koikal [ORNL; Holcomb, David Eugene [ORNL; Bradley, Eric Craig [ORNL; Zaharia, Nathaniel M [ORNL; Cooper, Eliott J [ORNL

2012-07-01T23:59:59.000Z

305

Environmental Compliance and Protection Program Description Oak Ridge, Tennessee  

SciTech Connect (OSTI)

The objective of the Environmental Compliance and Protection (EC and P) Program Description (PD) is to establish minimum environmental compliance requirements and natural resources protection goals for the Bechtel Jacobs Company LLC (BJC) Oak Ridge Environmental Management Cleanup Contract (EMCC) Contract Number DE-AC05-98OR22700-M198. This PD establishes the work practices necessary to ensure protection of the environment during the performance of EMCC work activities on the US Department of Energy's (DOE's) Oak Ridge Reservation (ORR) in Oak Ridge, Tennessee, by BJC employees and subcontractor personnel. Both BJC and subcontractor personnel are required to implement this PD. A majority of the decontamination and demolition (D and D) activities and media (e.g., soil and groundwater) remediation response actions at DOE sites on the ORR are conducted under the authority of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). CERCLA activities are governed by individual CERCLA decision documents (e.g., Record of Decision [ROD] or Action Memorandum) and according to requirements stated in the Federal Facility Agreement for the Oak Ridge Reservation (DOE 1992). Applicable or relevant and appropriate requirements (ARARs) for the selected remedy are the requirements for environmental remediation responses (e.g., removal actions and remedial actions) conducted under CERCLA.

Bechtel Jacobs

2009-02-26T23:59:59.000Z

306

SAPLE: Sandia Advanced Personnel Locator Engine.  

SciTech Connect (OSTI)

We present the Sandia Advanced Personnel Locator Engine (SAPLE) web application, a directory search application for use by Sandia National Laboratories personnel. SAPLE's purpose is to return Sandia personnel 'results' as a function of user search queries, with its mission to make it easier and faster to find people at Sandia. To accomplish this, SAPLE breaks from more traditional directory application approaches by aiming to return the correct set of results while placing minimal constraints on the user's query. Two key features form the core of SAPLE: advanced search query interpretation and inexact string matching. SAPLE's query interpretation permits the user to perform compound queries when typing into a single search field; where able, SAPLE infers the type of field that the user intends to search on based on the value of the search term. SAPLE's inexact string matching feature yields a high-quality ranking of personnel search results even when there are no exact matches to the user's query. This paper explores these two key features, describing in detail the architecture and operation of SAPLE. Finally, an extensive analysis on logged search query data taken from an 11-week sample period is presented.

Procopio, Michael J.

2010-04-01T23:59:59.000Z

307

TAGGING, TRACKING AND LOCATING WITHOUT GPS  

SciTech Connect (OSTI)

The Savannah River National Laboratory (SRNL) was requested to lead a Law Enforcement Working Group that was formed to collaborate on common operational needs. All agencies represented on the working group ranked their need to tag, track, and locate a witting or unwitting target as their highest priority. Specifically, they were looking for technologies more robust than Global Positioning Satellite (GPS), could communicate back to the owner, and worked where normal cell phone communications did not work or were unreliable. SRNL brought together multiple technologies in a demonstration that was held in in various Alaska venues, including metropolitan, wilderness, and at-sea that met the working group's requirements. Using prototypical technologies from Boeing, On Ramp, and Fortress, SRNL was able to demonstrate the ability to track personnel and material in all scenarios including indoors, in heavily wooden areas, canyons, and in parking garages. In all cases GPS signals were too weak to measure. Bi-directional communication was achieved in areas that Wi-Fi, cell towers, or traditional radios would not perform. The results of the exercise will be presented. These technologies are considered ideal for tracking high value material such has nuclear material with a platform that allows seamless tracking anywhere in the world, indoors or outdoors.

Cordaro, J.; Coleman, T.; Shull, D.

2012-07-08T23:59:59.000Z

308

Sandia National Laboratories: Locations: Livermore, California: Visiting  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -theErik Spoerke SSLS ExhibitIowa StateClimateLightingLivermore:Sandia/California:

309

Theoretical descriptions of neutron emission in fission  

SciTech Connect (OSTI)

Brief descriptions are given of the observables in neutron emission in fission together with early theoretical representations of two of these observables, namely, the prompt fission neutron spectrum N(E) and the average prompt neutron multiplicity {bar {nu}}{sub p}. This is followed by summaries, together with examples, of modern approaches to the calculation of these two quantities. Here, emphasis is placed upon the predictability and accuracy of the new approaches. In particular, the dependencies of N(E) and {bar {nu}}{sub p} upon the fissioning nucleus and its excitation energy are discussed. Then, recent work in multiple-chance fission and other recent work involving new measurements are presented and discussed. Following this, some properties of fission fragments are mentioned that must be better known and better understood in order to calculate N(E) and {bar {nu}}{sub p} with higher accuracy than is currently possible. In conclusion, some measurements are recommended for the purpose of benchmarking simultaneous calculations of neutron emission and gamma emission in fission. 32 refs., 26 figs.

Madland, D.G.

1990-01-01T23:59:59.000Z

310

Symplectic map description of Halley's comet dynamics  

E-Print Network [OSTI]

The main features of 1P/Halley chaotic dynamics can be described by a two dimensional symplectic map. Using Mel'nikov integral we semi-analytically determine such a map for 1P/Halley taking into account gravitational interactions from the Sun and the eight planets. We determine the Solar system kick function ie the energy transfer to 1P/Halley along one passage through the Solar system. Our procedure allows to compute for each planet its contribution to the Solar system kick function which appears to be the sum of the Keplerian potential of the planet and of a rotating circular gravitational dipole potential due to the Sun movement around Solar system barycenter. We test the robustness of the symplectic Halley map by directly integrating Newton's equations over $\\sim 2.4\\cdot 10^4$ yr around Y2K and by reconstructing the Solar system kick function. Our results show that the Halley map with fixed parameters gives a reliable description of comet dynamics on time scales of $10^4$ yr while on a larger scales the parameters of the map are slowly changing due to slow oscillations of orbital momentum.

G. Rollin; P. Haag; J. Lages

2015-02-02T23:59:59.000Z

311

STUDENT LABOR POSITION DESCRIPTION SENS Program  

E-Print Network [OSTI]

program in sustainable living and ecological design for ecovillage residents and the campus and off-campus communities. 2. Complete the conceptual design of the SENS House. 3. Gain a technical understanding of the main construction techniques planned for the SENS House and the state and local building codes related

Baltisberger, Jay H.

312

Clean Coal Technology: Region 3 Market Description, Mid-Atlantic. Summary  

SciTech Connect (OSTI)

The Region 3 Market Description summary provides information that can be used in developing an understanding of the potential markets for clean coal technologies (CCTs) in the Mid-Atlantic Region. This region (which geographically is Federal Region 3) consists of the District of Columbia and the following five states: Delaware, Virginia, Maryland, West Virginia, Pennsylvania. In order to understand the potential market, a description is provided of the region`s energy use, power generation capacity, and potential growth. Highlights of state government activities that could have a bearing on commercial deployment of CCTs are also presented. The potential markets characterized in this summary center on electric power generation by investor-owned, cooperative, and municipal electric utilities and involve planned new capacity additions and actions taken by utilities to comply with Phases I and II of the Clean Air Act Amendments (CAAA) of 1990. Regulations, policies, utility business strategies, and organizational changes that could impact the role of CCTs as a utility option are identified and discussed. The information used to develop the Region 3 Market Description is based mainly on an extensive review of plans and annual reports of 17 investor-owned, cooperative, and municipal electric utilities and public information on strategies and actions for complying with the CAAA of 1990.

Not Available

1993-09-01T23:59:59.000Z

313

On the Anonymity of Home/Work Location Pairs  

E-Print Network [OSTI]

On the Anonymity of Home/Work Location Pairs Philippe Golle and Kurt Partridge Palo Alto Research population is 1, 21 and 34,980, for locations known at the granularity of a census block, census track

Golle, Philippe

314

Holdout transshipment policy in two-location inventory systems   

E-Print Network [OSTI]

In two-location inventory systems, unidirectional transshipment policies are considered when an item is not routinely stocked at a location in the system. Unlike the past research in this area which has concentrated on ...

Zhang, Jiaqi

2009-01-01T23:59:59.000Z

315

A Privacy Conscious Bluetooth Infrastructure for Location Aware Computing  

E-Print Network [OSTI]

We present a low cost and easily deployed infrastructure for location aware computing that is built using standard Bluetooth® technologies and personal computers. Mobile devices are able to determine their location to ...

Huang, Albert

316

Etherthreads : an infrastructure for location-based messages  

E-Print Network [OSTI]

This thesis proposes an infrastructure for location-based services for Bluetooth enabled cellular phones. Specifically, it explores the use of this architecture in a location-based messaging application. A user can send ...

Lassey, Bradford, 1980-

2004-01-01T23:59:59.000Z

317

Provable and practical location privacy for vehicular and mobile systems  

E-Print Network [OSTI]

In recent years, there has been a rapid evolution of location-based vehicular and mobile services (e.g., electronic tolling, congestion pricing, traffic statistics, insurance pricing, location-based social applications), ...

Popa, Raluca Ada

2010-01-01T23:59:59.000Z

318

Locating a semi-obnoxious facility with repelling polygonal regions  

E-Print Network [OSTI]

Apr 30, 2007 ... Page 1 ... For the last years, the location of semi-desirable facilities has been a widely studied topic by the researchers in location theory (see [1 ...

2007-04-30T23:59:59.000Z

319

Database Description with SDM: A Semantic Database Model  

E-Print Network [OSTI]

Database Description with SDM: A Semantic Database Model MICHAEL HAMMER Massachusetts Institute of Technology and DENNIS McLEOD University of Southern California SDM is a high-level semantics-based database description and structuring formalism (database model) for databases. This database model is designed

McLeod, Dennis

320

2012 Graduate School of Science Current Course Descriptions Common Courses  

E-Print Network [OSTI]

, and social issues (ELSI) as well as cases of bioethics, climate change and nuclear power. https2012 Graduate School of Science Current Course Descriptions Common Courses Science Communication Courses Course code Course title Instructor Course Description 35620-2001 Theory of Science Communication

Sano, Masaki

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

4-H Horse Advisory Committee Member Service Description And Agreement  

E-Print Network [OSTI]

. Responsibilities · Follow all guidelines and policies of University of New Hampshire Cooperative Extension 4-H4-H Horse Advisory Committee Member Service Description And Agreement Purpose · To serve to the scope of the duties defined in this service description. Accountable to Extension staff

New Hampshire, University of

322

Inventory List Item Number Brief Description Price Preferred Vendor  

E-Print Network [OSTI]

Inventory List UT Austin Item Number Brief Description Price Preferred Vendor L0146 Adapter, Glass w/Screw Top, Amber, 4 dram $0.56 VWRSC 4/21/14 Page - 1 #12;Inventory List UT Austin Item Number;Inventory List UT Austin Item Number Brief Description Price Preferred Vendor S0027 CD, Recordable $0

323

STAFF POSITION DESCRIPTION SAN JOSE STA TE HUMAN RESOURCES  

E-Print Network [OSTI]

STAFF POSITION DESCRIPTION SAN JOSE STA TE HUMAN RESOURCES UNIVERSITY Workforce Planning l: 408-924-2250 I408-924-1784 (fax) Job Description Staff Date: Workforce Planning, Human Resources (Name [Workforce Planning reviews the CSU classification standards with essential duties of the positions] F

Su, Xiao

324

Adapting Optimization Techniques to Description Logics with Concrete Domains  

E-Print Network [OSTI]

Adapting Optimization Techniques to Description Logics with Concrete Domains Anni-Yasmin Turhan backtracking and model merging can be adapted to description logics with concrete domains. We propose al) a new requirement for concrete domains in order to enable dependency directed backtracking for all clash

Haarslev, Volker

325

Adapting Optimization Techniques to Description Logics with Concrete Domains  

E-Print Network [OSTI]

Adapting Optimization Techniques to Description Logics with Concrete Domains Anni­Yasmin Turhan backtracking and model merging can be adapted to description logics with concrete domains. We propose al) a new requirement for concrete domains in order to enable dependency directed backtracking for all clash

Haarslev, Volker

326

NExpTime-complete Description Logics with Concrete Domains  

E-Print Network [OSTI]

that reasoning with the concrete do- main D (i.e., testing the satis#12;ability of #12;nite conjunctionsChapter 1 NExpTime-complete Description Logics with Concrete Domains Carsten Lutz Abstract. Description Logics (DLs) incorporating concrete domains are useful formalisms for integrated reasoning about

Baader, Franz

327

Waste Description Type of Project Pounds Reduced, Reused,  

E-Print Network [OSTI]

Accelerator =1; National Synchrotron Light Source=1; Basic Energy Sciences=1) each handle 66 lbs. of hazardousWaste Description Type of Project Pounds Reduced, Reused, Recycled or Conserved in 2009 Waste Type Description Details * Alkaline batteries Recycling 200 Industrial waste $10 $0 $10 Two hundred pounds

328

Review article FUSSIM2: brief description of the simulation model  

E-Print Network [OSTI]

Review article FUSSIM2: brief description of the simulation model and application to fertigation zone, which may be harmful to crop development. A two-dimensional simulation model for the above-dimensional simulation model Résumé ­ FUSSIM2 : brève description du modèle de simulation et application aux scenari de

Paris-Sud XI, Université de

329

Description and Simulation of Gust Front Wind Field Lijuan Wanga  

E-Print Network [OSTI]

-stationarity of the wind field associated with these extreme events poses serious challenges in their modelingDescription and Simulation of Gust Front Wind Field Lijuan Wanga , Ahsan Kareemb a Nat front wind field is proposed based on the time-frequency description of the wind field. Traditionally

Kareem, Ahsan

330

Qualifying RPS Market States (Newfoundland and Labrador, Canada)  

Broader source: Energy.gov [DOE]

This entry lists the states with RPS policies that accept generation located in Newfoundland and Labrador, Canada as eligible sources towards their Renewable Portfolio Standard targets or goals. ...

331

Risks of using AP locations discovered through war driving  

E-Print Network [OSTI]

Risks of using AP locations discovered through war driving Minkyong Kim, Jeffrey J. Fielding the actual locations are often unavailable, they use estimated locations from war driving estimated through war driving. War driving is the process of collecting Wi-Fi beacons by driving or walking

Kotz, David

332

Accurate Eye Center Location through Invariant Isocentric Patterns  

E-Print Network [OSTI]

1 Accurate Eye Center Location through Invariant Isocentric Patterns Roberto Valenti, Student Member, IEEE, and Theo Gevers, Member, IEEE, Abstract--Locating the center of the eyes allows for valuable information to be captured and used in a wide range of applications. Accurate eye center location

Gevers, Theo

333

Shippingport Spent Fuel Canister System Description  

SciTech Connect (OSTI)

In 1978 and 1979, a total of 72 blanket fuel assemblies (BFAs), irradiated during the operating cycles of the Shippingport Atomic Power Station's Pressurized Water Reactor (PWR) Core 2 from April 1965 to February 1974, were transferred to the Hanford Site and stored in underwater storage racks in Cell 2R at the 221-T Canyon (T-Plant). The initial objective was to recover the produced plutonium in the BFAs, but this never occurred and the fuel assemblies have remained within the water storage pool to the present time. The Shippingport Spent Fuel Canister (SSFC) is a confinement system that provides safe transport functions (in conjunction with the TN-WHC cask) and storage for the BFAs at the Canister Storage Building (CSB). The current plan is for these BFAs to be retrieved from wet storage and loaded into SSFCs for dry storage. The sealed SSFCs containing BFAs will be vacuum dried, internally backfilled with helium, and leak tested to provide suitable confinement for the BFAs during transport and storage. Following completion of the drying and inerting process, the SSFCs are to be delivered to the CSB for closure welding and long-term interim storage. The CSB will provide safe handling and dry storage for the SSFCs containing the BFAs. The purpose of this document is to describe the SSFC system and interface equipment, including the technical basis for the system, design descriptions, and operations requirements. It is intended that this document will be periodically updated as more equipment design and performance specification information becomes available.

JOHNSON, D.M.

2000-03-27T23:59:59.000Z

334

Summary engineering description of underwater fuel storage facility for foreign research reactor spent nuclear fuel  

SciTech Connect (OSTI)

This document is a summary description for an Underwater Fuel Storage Facility (UFSF) for foreign research reactor (FRR) spent nuclear fuel (SNF). A FRR SNF environmental Impact Statement (EIS) is being prepared and will include both wet and dry storage facilities as storage alternatives. For the UFSF presented in this document, a specific site is not chosen. This facility can be sited at any one of the five locations under consideration in the EIS. These locations are the Idaho National Engineering Laboratory, Savannah River Site, Hanford, Oak Ridge National Laboratory, and Nevada Test Site. Generic facility environmental impacts and emissions are provided in this report. A baseline fuel element is defined in Section 2.2, and the results of a fission product analysis are presented. Requirements for a storage facility have been researched and are summarized in Section 3. Section 4 describes three facility options: (1) the Centralized-UFSF, which would store the entire fuel element quantity in a single facility at a single location, (2) the Regionalized Large-UFSF, which would store 75% of the fuel element quantity in some region of the country, and (3) the Regionalized Small-UFSF, which would store 25% of the fuel element quantity, with the possibility of a number of these facilities in various regions throughout the country. The operational philosophy is presented in Section 5, and Section 6 contains a description of the equipment. Section 7 defines the utilities required for the facility. Cost estimates are discussed in Section 8, and detailed cost estimates are included. Impacts to worker safety, public safety, and the environment are discussed in Section 9. Accidental releases are presented in Section 10. Standard Environmental Impact Forms are included in Section 11.

Dahlke, H.J.; Johnson, D.A.; Rawlins, J.K.; Searle, D.K.; Wachs, G.W.

1994-10-01T23:59:59.000Z

335

Geometric description of BTZ black holes thermodynamics  

E-Print Network [OSTI]

We study the properties of the space of thermodynamic equilibrium states of the Ba\\~nados-Teitelboim-Zanelli (BTZ) black hole in (2+1)-gravity. We use the formalism of geometrothermodynamics to introduce in the space of equilibrium states a $2-$dimensional thermodynamic metric whose curvature is non-vanishing, indicating the presence of thermodynamic interaction, and free of singularities, indicating the absence of phase transitions. Similar results are obtained for generalizations of the BTZ black hole which include a Chern-Simons term and a dilatonic field. Small logarithmic corrections of the entropy turn out to be represented by small corrections of the thermodynamic curvature, reinforcing the idea that thermodynamic curvature is a measure of thermodynamic interaction.

Hernando Quevedo; Alberto Sanchez

2008-11-15T23:59:59.000Z

336

DESCRIPTION OF THE RHIC SEQUENCER SYSTEM.  

SciTech Connect (OSTI)

The movement of the Relativistic Heavy Ion Collider (RHIC) through its various states (eg. injection, acceleration, storage, collisions) is controlled by an application called the Sequencer. This program orchestrates most magnet and instrumentation systems and is responsible for the coordinated acquisition and saving of data from various systems. The Sequencer system, its software infrastructure, support programs, and the language used to drive it are discussed in this paper. Initial operational experience is also described.

DOTTAVIO,T.; FRAK,B.; MORRIS,J.; SATOGATA,T.; VAN ZEIJTS,J.

2001-11-27T23:59:59.000Z

337

Deformed one-quasiparticle states in covariant density functional theory  

E-Print Network [OSTI]

Systematic investigation of the accuracy of the description of the energies of deformed one-quasiparticle states has been performed in covariant density functional theory in actinide and rare-earth mass regions. The sources of the discrepancies between theory and experiment are analyzed. Although some improvements in the description of ground state configurations and one-quasiparticle spectra can be achieved by better parametrization of the relativistic mean field Lagrangian, the analysis suggests that spectroscopic quality of their description can be achieved only in theoretical framework which takes into account particle-vibration coupling.

A. V. Afanasjev; S. Shawaqfeh

2012-05-10T23:59:59.000Z

338

Transmission Benefits of Co-Locating Concentrating Solar Power and Wind  

SciTech Connect (OSTI)

In some areas of the U.S. transmission constraints are a limiting factor in deploying new wind and concentrating solar power (CSP) plants. Texas is an example of one such location, where the best wind and solar resources are in the western part of the state, while major demand centers are in the east. The low capacity factor of wind is a compounding factor, increasing the relative cost of new transmission per unit of energy actually delivered. A possible method of increasing the utilization of new transmission is to co-locate both wind and concentrating solar power with thermal energy storage. In this work we examine the benefits and limits of using the dispatachability of thermal storage to increase the capacity factor of new transmission developed to access high quality solar and wind resources in remote locations.

Sioshansi, R.; Denholm, P.

2012-03-01T23:59:59.000Z

339

Wright State Career Fair | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Career Fair Wright State Career Fair October 30, 2014 11:00AM to 1:00PM EDT Location: Student Union-Apollo Room, 3640 Colonel Glenn Hwy., Dayton, OH 45435 POC: Trisha Zamarron...

340

Qualifying RPS Market States (New Brunswick, Canada)  

Broader source: Energy.gov [DOE]

This entry lists the states with RPS policies that accept generation located in New Brunswick, Canada as eligible sources towards their Renewable Portfolio Standard targets or goals. For specific...

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Qualifying RPS Market States (Nova Scotia, Canada)  

Broader source: Energy.gov [DOE]

This entry lists the states with RPS policies that accept generation located in Nova Scotia, Canada as eligible sources towards their Renewable Portfolio Standard targets or goals. For specific...

342

Qualifying RPS State Export Markets (West Virginia)  

Broader source: Energy.gov [DOE]

This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in West Virginia as eligible sources towards their RPS targets or goals. For specific...

343

Qualifying RPS State Export Markets (New Mexico)  

Broader source: Energy.gov [DOE]

This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in New Mexico as eligible sources towards their RPS targets or goals. For specific...

344

Qualifying RPS State Export Markets (Rhode Island)  

Broader source: Energy.gov [DOE]

This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Rhode Island as eligible sources towards their RPS targets or goals. For specific...

345

Qualifying RPS State Export Markets (New Hampshire)  

Broader source: Energy.gov [DOE]

This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in New Hampshire as eligible sources towards their RPS targets or goals. For specific...

346

Qualifying RPS State Export Markets (North Carolina)  

Broader source: Energy.gov [DOE]

This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in North Carolina as eligible sources towards their RPS targets or goals. For specific...

347

Qualifying RPS State Export Markets (North Dakota)  

Broader source: Energy.gov [DOE]

This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in North Dakota as eligible sources towards their RPS targets or goals. For specific...

348

Tri-State Synfuels Project Review: Volume 12. Fluor project status. [Proposed Henderson, Kentucky coal to gasoline plant; engineering  

SciTech Connect (OSTI)

The purpose of this report is to document and summarize activities associated with Fluor's efforts on the Tri-State Synfuels Project. The proposed facility was to be coal-to-transport fuels facility located in Henderson, Kentucky. Tri-State Synfuels Company was participating in the project as a partner of the US Department of Energy per terms of a Cooperative Agreement resulting from DOE's synfuel's program solicitation. Fluor's initial work plan called for preliminary engineering and procurement services to the point of commitment for construction for a Sasol Fischer-Tropsch plant. Work proceeded as planned until October 1981 when results of alternative coal-to-methanol studies revealed the economic disadvantage of the Synthol design for US markets. A number of alternative process studies followed to determine the best process configuration. In January 1982 Tri-State officially announced a change from Synthol to a Methanol to Gasoline (MTG) design basis. Further evaluation and cost estimates for the MTG facility eventually led to the conclusion that, given the depressed economic outlook for alternative fuels development, the project should be terminated. Official announcement of cancellation was made on April 13, 1982. At the time of project cancellation, Fluor had completed significant portions of the preliminary engineering effort. Included in this report are descriptions and summaries of Fluor's work during this project. In addition location of key project data and materials is identified and status reports for each operation are presented.

Not Available

1982-06-01T23:59:59.000Z

349

Entanglement Teleportation Through Cat-like States  

E-Print Network [OSTI]

We first consider teleportation of entangled states shared between Claire and Alice to Bob1 and Bob2 when Alice and the two Bobs share a single copy of a GHZ-class state and where {\\it all} the four parties are at distant locations. We then generalize this situation to the case of teleportation of entangled states shared between Claire1, Claire2, ....., Claire(N-1) and Alice to Bob1, Bob2, ....., BobN when Alice and the N Bobs share a single copy of a Cat-like state and where again {\\it all} the 2N parties are at distant locations.

Sibasish Ghosh; Guruprasad Kar; Anirban Roy; Debasis Sarkar; Ujjwal Sen

2000-12-20T23:59:59.000Z

350

Toward a new description of triaxial nuclei  

SciTech Connect (OSTI)

The liquid drop Hamiltonian is amended with a potential which allows us to separate, in the intrinsic frame, the equations for {beta} and {gamma} coordinates. The Schroedinger equation for {beta} is that for a sextic oscillator plus a centrifugal term, while that for {gamma} is just the equation for the Mathieu function. The total energy has a compact form. The operator for the electric quadrupole transitions is considered in the intrinsic frame and involves two parameters accompanying the harmonic and anharmonic components. The parameters determining the energies as well as those defining the transition operator are to be determined by a fitting procedure. Applications refer to five isotopes: {sup 188}Os, {sup 190}Os, {sup 192}Os, {sup 228}Th, and {sup 230}Th. Results are in good agreement with the corresponding experimental data. Results are also compared with those obtained within the coherent state model. A possible connection between the two formalisms is pointed out.

Raduta, A. A. [Department of Theoretical Physics, Institute of Physics and Nuclear Engineering, Post Office Box MG6, RO-077125 Bucharest (Romania); Academy of Romanian Scientists, 54 Splaiul Independentei, RO-050094 Bucharest (Romania); Buganu, P. [Department of Theoretical Physics, Institute of Physics and Nuclear Engineering, Post Office Box MG6, RO-077125 Bucharest (Romania)

2011-03-15T23:59:59.000Z

351

Preconceptual Design Description for Caustic Recycle Facility  

SciTech Connect (OSTI)

The U.S. Department of Energy plans to vitrify both high-level and low-activity waste at the Hanford Site in southeastern Washington State. One aspect of the planning includes a need for a caustic recycle process to separate sodium hydroxide for recycle. Sodium is already a major limitation to the waste-oxide loading in the low-activity waste glass to be vitrified at the Waste Treatment Plant, and additional sodium hydroxide will be added to remove aluminum and to control precipitation in the process equipment. Aluminum is being removed from the high level sludge to reduce the number of high level waste canisters produced. A sodium recycle process would reduce the volume of low-activity waste glass produced and minimize the need to purchase new sodium hydroxide, so there is a renewed interest in investigating sodium recycle. This document describes an electrochemical facility for recycling sodium for the WTP.

Sevigny, Gary J.; Poloski, Adam P.; Fountain, Matthew S.; Kurath, Dean E.

2008-04-12T23:59:59.000Z

352

Born-Oppenheimer description of two atoms in a combined oscillator and lattice trap  

E-Print Network [OSTI]

We analyze the quantum states of two atoms in a combined harmonic oscillator and periodic lattice trap in one spatial dimension. In the case of tight-binding and only nearest neighbor tunneling, the equations of motion are conveniently represented in the momentum representation. We show that in the case of strong attraction between the particles, the di?erent time scales of relative and center-of-mass motion validate a separation of the problem similar to the Born-Oppenheimer approximation applied in the description of electronic and nuclear motion in molecules.

Ole Søe Sørensen; Klaus Mølmer

2012-06-26T23:59:59.000Z

353

Microsoft Word - QO-NNSA-SC-Description.docx  

Broader source: Energy.gov (indexed) [DOE]

I Process Description* NNSA Service Center Number: PD 02.04.02 Title: Selection, Training and Approval of Qualifying Officials (QO) for the Technica l Qualification Prog ram (TQP)...

354

Y-12 Lease Summary Address* (Description) Square Footage Lease...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Y-12 Lease Summary Address* (Description) Square Footage Lease Term Expiration Date Onsite Leases 602 Scarboro Rd (New Hope Center) 137,758 square feet Five years 05042012 301...

355

EEE 437 Optoelectronics (3) [SS] Course (Catalog) Description  

E-Print Network [OSTI]

EEE 437 Optoelectronics (3) [SS] Course (Catalog) Description: Basic operating principles of various types of optoelectronic devices which play important roles in commercial and communication. Prerequisite: EEE 436. Textbook: J. Singh, Semiconductor Optoelectronics: An Introduction to Material

Zhang, Junshan

356

Development of a body force description for compressor stability assessment  

E-Print Network [OSTI]

This thesis presents a methodology for a body force description of a compressor with particular application to compressor stability calculations. The methodology is based on extracting blade forces from an axisymmetric ...

Kiwada, George (George Ford)

2008-01-01T23:59:59.000Z

357

Syllabus for MA 16100 IMPACT, Fall 2014 Description: Many ...  

E-Print Network [OSTI]

Syllabus for MA 16100 IMPACT, Fall 2014. Description: Many students find that large lectures are not the best way for them to learn. IMPACT is a university-wide

2014-08-25T23:59:59.000Z

358

Description of isoscalar giant dipole resonance in nuclei  

E-Print Network [OSTI]

Applicability of the Hartree-Fock (HF) based random phase approximation (RPA) with several Skyrme effective interactions to the description of the isoscalar giant monopole (ISGMR) and the isoscalar giant dipole resonance (ISGDR) in 90Zr, 116Sn, 144...

Pochivalov, Oleksiy Grigorievich

2009-05-15T23:59:59.000Z

359

SCS-2002-10 Description of Water Analysis Parameters  

E-Print Network [OSTI]

of laboratories often lack basic descriptions for terminology, potential sources of contaminates or parameters-field brine, sea water, industrial brine, and reclaimed effluent water, etc. Issues Moderate amounts of sodium

360

System design description 241-SY-101 color video camera  

SciTech Connect (OSTI)

This System Design Description describes the major components of the 101-SY color camera system. The system is comprised of the camera assembly, the purge system, and the multiport riser unit.

Kohlman, E.H.; Smet, D.B.

1994-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

BuildingName The Description of the Project  

E-Print Network [OSTI]

- ALTERNATES SECTION 012900 ­ PAYMENT PROCEDURES SECTION 013100 - PROJECT MANAGEMENT AND COORDINATIONBuildingName The Description of the Project P00000000 0000 DOCUMENTS SPECIFICATION DIVISION 1 SECTION 013200 - CONSTRUCTION PROGRESS DOCUMENTATION SECTION 013300 - SUBMITTAL PROCEDURES SECTION

Kamat, Vineet R.

362

MECH 502: Advanced/Additive Manufacturing Engineering COURSE DESCRIPTION  

E-Print Network [OSTI]

MECH 502: Advanced/Additive Manufacturing Engineering COURSE DESCRIPTION In this course you product development and innovation. You will develop a rich knowledge of additive manufacturing processes enabling advanced/additive manufacturing and personal fabrication. You will have the opportunity

Schumacher, Russ

363

Generation of Web Service Descriptions and Web Service  

E-Print Network [OSTI]

Generation of Web Service Descriptions and Web Service Module Implementation for Concept University of Science and Technology Software Systems Institute (STS) #12;Abstract Nowadays web services in order to initiate the communication. A web services endpoint communication interface utilizes

364

Norwegian Language description of Jacobs University Hva er Jacobs University?  

E-Print Network [OSTI]

underviser tverrfaglig og deltar i forskningen ved Description of Jacobs University. Jacobs University tilbyr 2006 tilbyr Jacobs University mangfoldige muligheter til å lære av hverandre og leve sammen. Fordelen

365

Formalizing Multimedia Interpretation based on Abduction over Description Logic Aboxes  

E-Print Network [OSTI]

Formalizing Multimedia Interpretation based on Abduction over Description Logic Aboxes Sofia be formally derived using abduction over domain knowledge represented in an ontology. The approach uses rules, and formalizes the multimedia interpretation process using a combined abduction and deduction

Moeller, Ralf

366

Automated detection and location of indications in eddy current signals  

DOE Patents [OSTI]

A computer implemented information extraction process that locates and identifies eddy current signal features in digital point-ordered signals, signals representing data from inspection of test materials, by enhancing the signal features relative to signal noise, detecting features of the signals, verifying the location of the signal features that can be known in advance, and outputting information about the identity and location of all detected signal features.

Brudnoy, David M. (Albany, NY); Oppenlander, Jane E. (Burnt Hills, NY); Levy, Arthur J. (Schenectady, NY)

2000-01-01T23:59:59.000Z

367

Continuous wavelet transform analysis and modal location analysis acoustic emission source location for nuclear piping crack growth monitoring  

SciTech Connect (OSTI)

Source location is an important feature of acoustic emission (AE) damage monitoring in nuclear piping. The ability to accurately locate sources can assist in source characterisation and early warning of failure. This paper describe the development of a novelAE source location technique termed 'Wavelet Transform analysis and Modal Location (WTML)' based on Lamb wave theory and time-frequency analysis that can be used for global monitoring of plate like steel structures. Source location was performed on a steel pipe of 1500 mm long and 220 mm outer diameter with nominal thickness of 5 mm under a planar location test setup using H-N sources. The accuracy of the new technique was compared with other AE source location methods such as the time of arrival (TOA) techniqueand DeltaTlocation. Theresults of the study show that the WTML method produces more accurate location resultscompared with TOA and triple point filtering location methods. The accuracy of the WTML approach is comparable with the deltaT location method but requires no initial acoustic calibration of the structure.

Mohd, Shukri [Nondestructive Testing Group, Industrial Technology Division, Malaysian Nuclear Agency, 43000, Bangi, Selangor (Malaysia); Holford, Karen M.; Pullin, Rhys [Cardiff School of Engineering, Cardiff University, Queen's Buildings, The Parade, CARDIFF CF24 3AA (United Kingdom)

2014-02-12T23:59:59.000Z

368

RESFEN 3.1: Program description  

SciTech Connect (OSTI)

Today's energy-efficient windows can dramatically lower the heating and cooling costs associated with windows while increasing occupant comfort and minimizing window surface condensation problems. However, consumers are often confused about how to pick the most efficient window for a residence. Product information typically offers window properties U-factors or R-values, Solar Heat Gain Coefficients or Shading Coefficients, and air leakage rates. However, the relative importance of these properties depends on site-and building-specific conditions. Furthermore, these properties are based on static evaluation conditions that are very different from the real situation a window will be used in. A computer tool such as RESFEN can help consumers and builders pick the most energy-efficient and cost-effective window for a given application, whether it is a new home, an addition, or a window replacement. It calculates heating and cooling energy use and associated costs as well as peak heating and cooling demand for specific window products. Users define a specific scenario by specifying house type (single-story or two-story), geographic location, orientation, electricity and gas cost, and building configuration details (such as wall, floor, and HVAC system type). Users also specify size, shading and thermal properties of the window they wish to investigate. The thermal properties that RESFEN requires are U-factor, Solar Heat Gain Coefficient, and air leakage rate. RESFEN calculates the energy and cost implications of the window compared to an insulated wall. The relative energy and cost impacts of two different windows can be compared . RESFEN 3.0 was a major improvement over previous versions because it performs hourly calculations using aversion of the DOE 21E (LBL 1980, Winkelmann et al. 1993) energy analysis simulation program. RESFEN 3.1 incorporates additional improvements including input assumptions for the base case buildings taken from the National Fenestration Rating Council (NFRC) Annual Energy Subcommittee's efforts. Table 6-2 lists the input assumptions used in RESFEN 3.1, along with those from the previous version. These assumptions are reviewed continually and maybe refined in future versions to more accurately reflect typical building configurations and operation.

Mitchell, R.; Huang, J.; Arasteh, D.; Sullivan, R.; Phillip, S.

1999-08-01T23:59:59.000Z

369

CARRIER/CASK HANDLING SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The Carrier/Cask Handling System receives casks on railcars and legal-weight trucks (LWTs) (transporters) that transport loaded casks and empty overpacks to the Monitored Geologic Repository (MGR) from the Carrier/Cask Transport System. Casks that come to the MGR on heavy-haul trucks (HHTs) are transferred onto railcars before being brought into the Carrier/Cask Handling System. The system is the interfacing system between the railcars and LWTs and the Assembly Transfer System (ATS) and Canister Transfer System (CTS). The Carrier/Cask Handling System removes loaded casks from the cask transporters and transfers the casks to a transfer cart for either the ATS or CTS, as appropriate, based on cask contents. The Carrier/Cask Handling System receives the returned empty casks from the ATS and CTS and mounts the casks back onto the transporters for reshipment. If necessary, the Carrier/Cask Handling System can also mount loaded casks back onto the transporters and remove empty casks from the transporters. The Carrier/Cask Handling System receives overpacks from the ATS loaded with canisters that have been cut open and emptied and mounts the overpacks back onto the transporters for disposal. If necessary, the Carrier/Cask Handling System can also mount empty overpacks back onto the transporters and remove loaded overpacks from them. The Carrier/Cask Handling System is located within the Carrier Bay of the Waste Handling Building System. The system consists of cranes, hoists, manipulators, and supporting equipment. The Carrier/Cask Handling System is designed with the tooling and fixtures necessary for handling a variety of casks. The Carrier/Cask Handling System performance and reliability are sufficient to support the shipping and emplacement schedules for the MGR. The Carrier/Cask Handling System interfaces with the Carrier/Cask Transport System, ATS, and CTS as noted above. The Carrier/Cask Handling System interfaces with the Waste Handling Building System for building structures and space allocations. The Carrier/Cask Handling System interfaces with the Waste Handling Building Electrical System for electrical power.

E.F. Loros

2000-06-23T23:59:59.000Z

370

WASTE PACKAGE REMEDIATION SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The Waste Package Remediation System remediates waste packages (WPs) and disposal containers (DCs) in one of two ways: preparation of rejected DC closure welds for repair or opening of the DC/WP. DCs are brought to the Waste Package Remediation System for preparation of rejected closure welds if testing of the closure weld by the Disposal Container Handling System indicates an unacceptable, but repairable, welding flaw. DC preparation of rejected closure welds will require removal of the weld in such a way that the Disposal Container Handling System may resume and complete the closure welding process. DCs/WPs are brought to the Waste Package Remediation System for opening if the Disposal Container Handling System testing of the DC closure weld indicates an unrepairable welding flaw, or if a WP is recovered from the subsurface repository because suspected damage to the WP or failure of the WP has occurred. DC/WP opening will require cutting of the DC/WP such that a temporary seal may be installed and the waste inside the DC/WP removed by another system. The system operates in a Waste Package Remediation System hot cell located in the Waste Handling Building that has direct access to the Disposal Container Handling System. One DC/WP at a time can be handled in the hot cell. The DC/WP arrives on a transfer cart, is positioned within the cell for system operations, and exits the cell without being removed from the cart. The system includes a wide variety of remotely operated components including a manipulator with hoist and/or jib crane, viewing systems, machine tools for opening WPs, and equipment used to perform pressure and gas composition sampling. Remotely operated equipment is designed to facilitate DC/WP decontamination and hot cell equipment maintenance, and interchangeable components are provided where appropriate. The Waste Package Remediation System interfaces with the Disposal Container Handling System for the receipt and transport of WPs and DCs. The Waste Handling Building System houses the system, and provides the facility, safety, and auxiliary systems required to support operations. The system receives power from the Waste Handling Building Electrical System. The system also interfaces with the various DC systems.

N.D. Sudan

2000-06-22T23:59:59.000Z

371

Consistent description of kinetics and hydrodynamics of dusty plasma  

SciTech Connect (OSTI)

A consistent statistical description of kinetics and hydrodynamics of dusty plasma is proposed based on the Zubarev nonequilibrium statistical operator method. For the case of partial dynamics, the nonequilibrium statistical operator and the generalized transport equations for a consistent description of kinetics of dust particles and hydrodynamics of electrons, ions, and neutral atoms are obtained. In the approximation of weakly nonequilibrium process, a spectrum of collective excitations of dusty plasma is investigated in the hydrodynamic limit.

Markiv, B. [Institute for Condensed Matter Physics of the National Academy of Sciences of Ukraine, 1 Svientsitskii St., 79011 Lviv (Ukraine)] [Institute for Condensed Matter Physics of the National Academy of Sciences of Ukraine, 1 Svientsitskii St., 79011 Lviv (Ukraine); Tokarchuk, M. [Institute for Condensed Matter Physics of the National Academy of Sciences of Ukraine, 1 Svientsitskii St., 79011 Lviv (Ukraine) [Institute for Condensed Matter Physics of the National Academy of Sciences of Ukraine, 1 Svientsitskii St., 79011 Lviv (Ukraine); National University “Lviv Polytechnic,” 12 Bandera St., 79013 Lviv (Ukraine)

2014-02-15T23:59:59.000Z

372

Sensitivity of forced air distribution system efficiency to climate, duct location, air leakage and insulation  

E-Print Network [OSTI]

Location, Air Leakage and Insulation Iain S. Walker Energy4 Duct Insulation, Location and Leakageinsulation

Walker, Iain

2001-01-01T23:59:59.000Z

373

Lower Bounding Procedures for the Single Allocation Hub Location ...  

E-Print Network [OSTI]

[9] O'Kelly, M. E., A quadratic integer program for the location of interacting hub facilities, European Journal of Operational Research 32 (1987), pp. 393–404.

2014-11-30T23:59:59.000Z

374

The Value of Flexibility in Robust Location-Transportation Problem  

E-Print Network [OSTI]

Nov 25, 2014 ... Abstract: Facility location decisions play a critical role in transportation planning. In fact, it has recently become essential to study how such ...

Amir Ardestani-Jaafari

2014-11-25T23:59:59.000Z

375

p-facility Huff location problem on networks ?  

E-Print Network [OSTI]

sidering the location of two competing facilities on a linear market. ... This perturbs how the market is shared, since the new facilities will ..... Transactions in.

2014-10-30T23:59:59.000Z

376

Open Location-Oriented Services for the Web  

E-Print Network [OSTI]

point of a Service Oriented Architecture (SOA). Technically,the Web Service Oriented Architecture (SOA) ArchitecturalLocation-Oriented Services for the Web architecture based on

Wilde, Erik

2008-01-01T23:59:59.000Z

377

Colorado CRS 29-20-108, Location, Construction, or Improvement...  

Open Energy Info (EERE)

Location, Construction, or Improvement of Major Electrical or Natural Gas Facilities Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document-...

378

acoustic location system: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ON POWER SYSTEMS, VOL. 29, NO. 1, JANUARY 2014 203 Distribution Locational Marginal Pricing for Optimal Power Transmission, Distribution and Plants Websites Summary:...

379

anatomic subsite location: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

services (e.g., electronic tolling, congestion pricing, traffic statistics, insurance pricing, location-based social applications), ... Popa, Raluca Ada 2010-01-01 First Page...

380

agency dtra location: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

flows or spillovers between multinational enterprises (MNEs the diversity of locational environments. The localization of knowledge sources depends on MNE group of...

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Locations of Smart Grid Demonstration and Large-Scale Energy...  

Broader source: Energy.gov (indexed) [DOE]

the location of all projects created with funding from the Smart Grid Demonstration and Energy Storage Project, funded through the American Recovery and Reinvestment Act....

382

Condensing Heating and Water Heating Equipment Workshop Location...  

Energy Savers [EERE]

Condensing Heating and Water Heating Equipment Workshop Location: Washington Gas Light Appliance Training Facility 6801 Industrial Road Springfield, VA Date: October 9, 2014 Time:...

383

Determining Optimal Locations for New Wind Energy Development in Iowa.  

E-Print Network [OSTI]

??The purpose of this research is to generate the most accurate model possible for predicting locations most suitable for new wind energy development using a… (more)

Mann, David

2011-01-01T23:59:59.000Z

384

Title 33 CFR 115 Bridge Locations and Clearances: Administrative...  

Open Energy Info (EERE)

Bridge Locations and Clearances: Administrative Procedures Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Federal RegulationFederal Regulation:...

385

An Aggressive Reduction Scheme for the Simple Plant Location ...  

E-Print Network [OSTI]

We used routines from the Callable Library of IBM CPLEX version. 12.1 to solve ..... [23] M. Sun (2006) Solving the uncapacitated facility location problem using.

2011-11-26T23:59:59.000Z

386

Located in historic Los Alamos, New Mexico against the backdrop...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Located in historic Los Alamos, New Mexico against the backdrop of the lush Jemez Mountains, Los Alamos National Laboratory (LANL) offers its education program participants...

387

Cold Vacuum Dryer (CVD) Facility Fire Protection System Design Description (SYS 24)  

SciTech Connect (OSTI)

This system design description (SDD) addresses the Cold Vacuum Drying (CVD) Facility fire protection system (FPS). The primary features of the FPS for the CVD are a fire alarm and detection system, automatic sprinklers, and fire hydrants. The FPS also includes fire extinguishers located throughout the facility and fire hydrants to assist in manual firefighting efforts. In addition, a fire barrier separates the operations support (administrative) area from the process bays and process bay support areas. Administrative controls to limit combustible materials have been established and are a part of the overall fire protection program. The FPS is augmented by assistance from the Hanford Fire Department (HED) and by interface systems including service water, electrical power, drains, instrumentation and controls. This SDD, when used in conjunction with the other elements of the definitive design package, provides a complete picture of the FPS for the CVD Facility.

SINGH, G.

2000-10-17T23:59:59.000Z

388

Description of work for vadose borings in support of 200-UP-2 Unit  

SciTech Connect (OSTI)

This description of work (DOW) details the field activities associated with the vadose zone drilling and soil sampling in the 200-UP-2 Operable Unit (Task 2, 3, and 5) and will serve as a field guide for those performing the work. It will be used in conjunction with the 200-UP-2 RCRA Facility Investigation/Corrective Measures Study (DOE-RL 1993a,[LFI]) and Site Characterization Manual (WHC 1988a). Vadose zone borings are being constructed to characterize the vertical and horizontal extent of contaminants in sediments within and beneath the cribs. The locations for the proposed borings are presented in Figure 1. The contaminants of concern for the project are presented in Table 1.

Kelty, G.G.

1993-08-27T23:59:59.000Z

389

Robotics for mixed waste operations, demonstration description  

SciTech Connect (OSTI)

The Department of Energy (DOE) Office of Technology Development (OTD) is developing technology to aid in the cleanup of DOE sites. Included in the OTD program are the Robotics Technology Development Program and the Mixed Waste Integrated Program. These two programs are working together to provide technology for the cleanup of mixed waste, which is waste that has both radioactive and hazardous constituents. There are over 240,000 cubic meters of mixed low level waste accumulated at DOE sites and the cleanup is expected to generate about 900,000 cubic meters of mixed low level waste over the next five years. This waste must be monitored during storage and then treated and disposed of in a cost effective manner acceptable to regulators and the states involved. The Robotics Technology Development Program is developing robotics technology to make these tasks safer, better, faster and cheaper through the Mixed Waste Operations team. This technology will also apply to treatment of transuranic waste. The demonstration at the Savannah River Site on November 2-4, 1993, showed the progress of this technology by DOE, universities and industry over the previous year. Robotics technology for the handling, characterization and treatment of mixed waste as well robotics technology for monitoring of stored waste was demonstrated. It was shown that robotics technology can make future waste storage and waste treatment facilities better, faster, safer and cheaper.

Ward, C.R.

1993-11-01T23:59:59.000Z

390

State coal profiles, January 1994  

SciTech Connect (OSTI)

The purpose of State Coal Profiles is to provide basic information about the deposits, production, and use of coal in each of the 27 States with coal production in 1992. Although considerable information on coal has been published on a national level, there is a lack of a uniform overview for the individual States. This report is intended to help fill that gap and also to serve as a framework for more detailed studies. While focusing on coal output, State Coal Profiles shows that the coal-producing States are major users of coal, together accounting for about three-fourths of total US coal consumption in 1992. Each coal-producing State is profiled with a description of its coal deposits and a discussion of the development of its coal industry. Estimates of coal reserves in 1992 are categorized by mining method and sulfur content. Trends, patterns, and other information concerning production, number of mines, miners, productivity, mine price of coal, disposition, and consumption of coal are detailed in statistical tables for selected years from 1980 through 1992. In addition, coal`s contribution to the State`s estimated total energy consumption is given for 1991, the latest year for which data are available. A US summary of all data is provided for comparing individual States with the Nation as a whole. Sources of information are given at the end of the tables.

Not Available

1994-02-02T23:59:59.000Z

391

Description of Axial Detail for ROK Fuel  

SciTech Connect (OSTI)

For the purpose of NDA simulations of the ROK fuel assemblies, we have developed an axial burnup distribution to represent the pins themselves based on gamma scans of rods in the G23 assembly. For the purpose of modeling the G23 assembly (both at ORNL and LANL), the pin-by-pin burnup map as simulated by ROK is being assumed to represent the radial burnup distribution. However, both DA and NDA results indicate that this simulated estimate is not 100% correct. In particular, the burnup obtained from the axial gamma scan of 7 pins does not represent exactly the same 'average' pin burnup as the ROK simulation. Correction for this discrepancy is a goal of the well-characterized assembly task but will take time. For now, I have come up with a correlation for 26 axial points of the burnup as obtained by gamma scans of 7 different rods (C13, G01, G02, J11, K10, L02, and M04, neglecting K02 at this time) to the average burnup given by the simulation for each of the rods individually. The resulting fraction in each axial zone is then averaged for the 7 different rods so that it can represent every fuel pin in the assembly. The burnup in each of the 26 axial zones of rods in all ROK assemblies will then be directly adjusted using this fraction, which is given in Table 1. Note that the gamma scan data given by ROK for assembly G23 included a length of {approx}3686 mm, so the first 12 mm and the last 14 mm were ignored to give an actual rod length of {approx}366 cm. To represent assembly F02 in which no pin-by-pin burnup distribution is given by ROK, we must model it using infinitely-reflected geometry but can look at the effects of measuring in different axial zones by using intermediate burnup files (i.e. smaller burnups than 28 GWd/MTU) and determining which axial zone(s) each burnup represents. Details for assembly F02 are then given in Tables 2 and 3, which is given in Table 1 and has 44 total axial zones to represent the top meter in explicit detail in addition to the other 26 zones. Note that the MCNP files for F02 were created using the Monte Carlo burnup linkage code Monteburns, which saves MCNP input files with detailed compositions as a function of burnup. The 'intermediate burnup files' produced for F02 include a cooling time of 27 years. The axial location of 5 spacers was also included in the ROK F02 assembly in which each spacer contained a length of 3.81 cm. Note that due to the nature of Monteburns, which was run in a special fashion for this problem, the step number increments after the 27 year decay, so the second column of Table 2 refers to the step number that should be used in the Monteburns files.

Trellue, Holly R [Los Alamos National Laboratory; Galloway, Jack D [Los Alamos National Laboratory

2012-04-20T23:59:59.000Z

392

Solving seismological problems using SGRAPH program: I-source parameters and hypocentral location  

SciTech Connect (OSTI)

SGRAPH program is considered one of the seismological programs that maintain seismic data. SGRAPH is considered unique for being able to read a wide range of data formats and manipulate complementary tools in different seismological subjects in a stand-alone Windows-based application. SGRAPH efficiently performs the basic waveform analysis and solves advanced seismological problems. The graphical user interface (GUI) utilities and the Windows facilities such as, dialog boxes, menus, and toolbars simplified the user interaction with data. SGRAPH supported the common data formats like, SAC, SEED, GSE, ASCII, and Nanometrics Y-format, and others. It provides the facilities to solve many seismological problems with the built-in inversion and modeling tools. In this paper, I discuss some of the inversion tools built-in SGRAPH related to source parameters and hypocentral location estimation. Firstly, a description of the SGRAPH program is given discussing some of its features. Secondly, the inversion tools are applied to some selected events of the Dahshour earthquakes as an example of estimating the spectral and source parameters of local earthquakes. In addition, the hypocentral location of these events are estimated using the Hypoinverse 2000 program operated by SGRAPH.

Abdelwahed, Mohamed F. [Geological Hazards Research Unit, King Abdulaziz University (Saudi Arabia) and National Research Institute of Astronomy and Geophysics (NRIAG), Helwan (Egypt)

2012-09-26T23:59:59.000Z

393

Solid State Ionics 132 (2000) 159165 www.elsevier.com/locate/ssi  

E-Print Network [OSTI]

and the conservation of our vention of the steam engine is marginal. Just think resources by a cleaner and more dismay smoke, no soot, no steam engines or boilers, indeed that, in so far as electrochemical processes

Gleixner, Stacy

394

Solid State Sciences 4 (2002) 317322 www.elsevier.com/locate/ssscie  

E-Print Network [OSTI]

as electrodes in solar cells, flat panel displays and other commercial devices. For instance, the in- dustry TCO

Poeppelmeier, Kenneth R.

2002-01-01T23:59:59.000Z

395

Solid State Communications 141 (2007) 168171 www.elsevier.com/locate/ssc  

E-Print Network [OSTI]

efficient solar cells [10], biological coatings [11], and sensors [12]. Corresponding author at: W.M. Keck with solar energy [13­15]. However, due to the large band gap of TiO2 (about 3.2 eV in the anatase phase [16]), titania powders can only absorb ultraviolet light in the solar spectrum, which occupies less than 10

Qin, Lu-Chang

396

Understanding user state and preferences for robust spoken dialog systems and location-aware assistive technology  

E-Print Network [OSTI]

This research focuses on improving the performance of spoken dialog systems (SDS) in the domain of assistive technology for people with disabilities. Automatic speech recognition (ASR) has compelling potential applications ...

Li, William (William Pui Lum)

2012-01-01T23:59:59.000Z

397

EIS-0243: Nevada Test Site and Off-Site Locations in the State of Nevada  

Broader source: Energy.gov [DOE]

This EIS evaluates the potential environmental impacts of the management of low-level waste (LLW) at all sites and continue, to the extent practicable, disposal of on- site LLW at the Idaho...

398

Name: Wadivkar Ojas Date of Degree: May, 1997 Institution: Oklahoma State University Location: Stillwater, Oklahoma  

E-Print Network [OSTI]

involve application of de-icing salts or the application of heat to the bridge deck surface. The source temperatures with and without artificial precipitation on the slab top surface. A remote data acquisition unit with handbook recommendations for similar snow/ice melting systems were made. Recommended heat input fluxes were

399

Solid State Communications 145 (2008) 5660 www.elsevier.com/locate/ssc  

E-Print Network [OSTI]

.N. Danilova, E.L. Ivchenkob, W. Prettla, Z.D. Kvonc, Hyun-Ick Chod, Jung-Hee Leed, S.D. Ganicheva, a Terahertz

Ganichev, Sergey

400

Multiple Aphid Resistance from Alien Sources and its Chromosomal Location  

E-Print Network [OSTI]

Multiple Aphid Resistance from Alien Sources and its Chromosomal Location in Bread Wheat Leonardo A Alien Sources and Its Chromosomal Location in Bread Wheat Abstract Wheat (Triticum aestivum) is a very of this thesis were to: 1) identify novel sources of resistance to multiple aphid species in a wheat-alien

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

WORKING PAPER N 2009 -11 Regulatory policy and the location  

E-Print Network [OSTI]

Pamina Koenig Megan MacGarvie JEL Codes: F23, I18 Keywords: Pharmaceutical industry, location choices: pharmaceutical industry, location choices, price regulations, discrete choice model This paper was prepared plants. The pharmaceutical industry is one example of this type of industry. The pharmaceutical industry

Paris-Sud XI, Université de

402

Predicting Debris-Slide Locations in Northwestern California1  

E-Print Network [OSTI]

Predicting Debris-Slide Locations in Northwestern California1 Mark E. Reid,2 Stephen D. Ellen,3 tested four topographic models for predicting locations of debris-slide sources: 1) slope; 2) proximity to stream; 3) SHALSTAB with "standard" parameters; and 4) debris-slide-prone landforms, which delineates

Standiford, Richard B.

403

Quest for Personal Control over Mobile Location Privacy Pradeep Khosla  

E-Print Network [OSTI]

live and work, offering the promise of bringing us close to the holy grail of information technology to be utilized. Many efforts have been made to get it available, as one of the key services in the ubiquitous the architecture, there is a centralized location server, where a mobile user can register and submit her location

Wu, Dapeng Oliver

404

Comparison of Different Methods for Next Location Prediction  

E-Print Network [OSTI]

Comparison of Different Methods for Next Location Prediction Jan Petzold, Faruk Bagci, Wolfgang prediction anticipates a person's movement based on the history of previous sojourns. It is useful location prediction methods: dynamic Bayesian network, multi-layer perceptron, Elman net, Markov predictor

Ungerer, Theo

405

Derivation of Locational Marginal Prices for Restructured Wholesale Power Markets  

E-Print Network [OSTI]

Derivation of Locational Marginal Prices for Restructured Wholesale Power Markets Haifeng Liu restructured wholesale power markets, the detailed derivation of LMPs as actually used in industry practice Operator (MISO). Keywords: Locational marginal pricing, wholesale power market, AC optimal power flow, DC

Tesfatsion, Leigh

406

Blind Channel Identification for the Emitter Location Problem  

E-Print Network [OSTI]

a thesis entitled "Blind Channel Identification for the Emitter Location Problem: A Least Square ApproachBlind Channel Identification for the Emitter Location Problem: A Least Square Approach BY Cheung C. Chau B.S.E.E., Binghamton University, 2000 Thesis Submitted in Partial Fulfillment of the Requirements

Fowler, Mark

407

Pure-state dynamics of a pair of charge qubits in a random environment  

SciTech Connect (OSTI)

A pair of charge qubits in a random electromagnetic environment is studied, using the description of the random dynamics of its pure-state vector as given by quantum-state diffusion theory. It is shown by numerical computations that the pure-state dynamics provides a more detailed description than the density-matrix picture of the main effects such as phase dumping and depolarization.

Buric, Nikola [Department of Physics and Mathematics, Faculty of Pharmacy, University of Beograd, Vojvode Stepe 450, Belgrade (Serbia and Montenegro)

2005-10-15T23:59:59.000Z

408

17.100J / 14.781J / 15.678J Political Economy I: Theories of the State and the Economy, Fall 2002  

E-Print Network [OSTI]

Critical analysis of liberal, neoclassical, and Marxist perspectives on modern society. Alternative theories of economic growth, historical change, the state, classes, and ideology. Description from course home page: ...

Berger, Suzanne

409

DESCRIPTION OF THE SOFTWARE AND INTEGRATING PLATFORM  

SciTech Connect (OSTI)

The Cementitious Barriers Partnership (CBP) Project is a multi-disciplinary, multi-institutional collaboration supported by the United States Department of Energy (US DOE) Office of Waste Processing. The objective of the CBP project is to develop a set of tools to improve understanding and prediction of the long-term structural, hydraulic, and chemical performance of cementitious barriers used in nuclear applications. A multi-disciplinary partnership of federal, academic, private sector, and international expertise has been formed to accomplish the project objective. In addition to the US DOE, the CBP partners are the Savannah River National Laboratory (SRNL), Vanderbilt University (VU)/Consortium for Risk Evaluation with Stakeholder Participation (CRESP), Energy Research Center of the Netherlands (ECN), and SIMCO Technologies, Inc. The Nuclear Regulatory Commission (NRC) is providing support under a Memorandum of Understanding. The National Institute of Standards and Technology (NIST) is providing research under an Interagency Agreement. Neither the NRC nor NIST are signatories to the CRADA. The periods of cementitious performance being evaluated are >100 years for operating facilities and > 1000 years for waste management. The set of simulation tools and data developed under this project will be used to evaluate and predict the behavior of cementitious barriers used in near surface engineered waste disposal systems, e.g., waste forms, containment structures, entombments, and environmental remediation, including decontamination and decommissioning analysis of structural concrete components of nuclear facilities (spent-fuel pools, dry spent-fuel storage units, and recycling facilities such as fuel fabrication, separations processes). Simulation parameters will be obtained from prior literature and will be experimentally measured under this project, as necessary, to demonstrate application of the simulation tools for three prototype applications (waste form in concrete vault, high-level waste tank grouting, and spent-fuel pool). Test methods and data needs to support use of the simulation tools for future applications will be defined. The CBP project is a five-year effort focused on reducing the uncertainties of current methodologies for assessing cementitious barrier performance and increasing the consistency and transparency of the assessment process. The results of this project will enable improved risk-informed, performance-based decision-making and support several of the strategic initiatives in the DOE Office of Environmental Management Engineering & Technology Roadmap. Those strategic initiatives include (1) enhanced tank closure processes; (2) enhanced stabilization technologies; (3) advanced predictive capabilities; (4) enhanced remediation methods; (5) adapted technologies for site-specific and complex-wide D&D applications; (6) improved SNF storage, stabilization and disposal preparation; (7) enhanced storage, monitoring and stabilization systems; and (8) enhanced long-term performance evaluation and monitoring.

Flach, G.

2009-12-31T23:59:59.000Z

410

Semiclassical (SC) Description of Electronically Non-AdiabaticDynamics via the Initial Value Representation (IVR)  

SciTech Connect (OSTI)

The initial value representation (IVR) of semiclassical (SC) theory is used in conjunction with the Meyer-Miller/Stock-Thoss description of electronic degrees of freedom in order to treat electronically non-adiabatic processes. It is emphasized that the classical equations of motion for the nuclear and electronic degrees of freedom that emerge in this description are precisely the Ehrenfest equations of motion (the force on the nuclei is the force averaged over the electronic wavefunction), but that the trajectories given by these equations of motion do not have the usual shortcomings of the traditional Ehrenfest model when they are used within the SC-IVR framework. For example, in the traditional Ehrenfest model (a mixed quantum-classical approach) the nuclear motion emerges from a non-adiabatic encounter on an average potential energy surface (a weighted average according to the population in the various electronic states), while the SC-IVR describes the correct correlation between electronic and nuclear dynamics, i.e., the nuclear motion is on one potential energy surface or the other depending on the electronic state. Calculations using forward-backward versions of SC-IVR theory (FB-IVR) are presented to illustrate this behavior. An even more approximate version of the SC-IVR, the linearized approximation (LSC-IVR), is slightly better than the traditional Ehrenfest model, but since it cannot describe quantum coherence effects, the LSC-IVR is also not able to describe the correct correlation between nuclear and electronic dynamics.

Ananth, V.; Venkataraman, C.; Miller, W.H.

2007-06-22T23:59:59.000Z

411

NAME: Eelgrass Restoration in Puget Sound LOCATION: Puget Sound, WA  

E-Print Network [OSTI]

area within deltas NON-FEDERAL SPONSOR: Washington Department of Natural Resources PROJECT DESCRIPTION eelgrass restoration, with a focus on identifying sites that could be protected from future anthropogenic, eelgrass restoration in Puget Sound will raise pH levels and protect shellfish. STATUS: Planning and Design

US Army Corps of Engineers

412

"How-To" Sharing: Informal Systems of Expertise Location  

E-Print Network [OSTI]

something is done. How-Tos, largely written by volunteers, explain how to install water heaters, how to knit-To among computer and electronics hobbyists. These hobbyists generate detailed, step-by-step descriptions to be published and distributed in diverse ways. Lacking formal structure, How-Tos can be published in various

McDonald, David W.

413

POVERTY IN THE UNITED STATES Sociology 3505, Fall 2013  

E-Print Network [OSTI]

POVERTY IN THE UNITED STATES Sociology 3505, Fall 2013 Tuesdays and Thursdays, 9:00-10:20 AM 214 __________________________________________________________________________________ COURSE DESCRIPTION This course examines the nature and extent of poverty in the United States. Students will gain familiarity with poverty issues as we review topics such as people`s views of poverty, poverty

Stephens, Jacqueline

414

Massachusetts state information handbook: formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the state of Massachusetts. It contains: a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature, identification of the officers and committee chairmen, and a summary of recent relevant legislative action; the full text of relevant statutes and regulations.

None

1981-02-09T23:59:59.000Z

415

California state information handbook: formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the state of California. It contains: a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature, identification of the officers and committee chairmen, and a summary of recent relevant legislative action; the full text of relevant statutes and regulations.

none,

1981-02-09T23:59:59.000Z

416

Pennsylvania state information handbook: formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and State levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the State of Pennsylvania. It contains a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature, identification of the officers and committee chairmen, and a summary of recent relevant legislative action; and the full text of relevant statutes and regulations.

none,

1980-12-31T23:59:59.000Z

417

Maryland State information handbook: formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Handbook Series Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the State of Maryland. It contains: a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature, identification of the officers and committee chairmen, and a summary of recent relevant legislative action; and the full text of relevant statutes and regulations.

none,

1980-12-31T23:59:59.000Z

418

Florida state information handbook: formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with DOE, Office of Nuclear Waste Management, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the federal and state levels, the pertinent programs they administer, each affected state legislature, and current federal and state legislative and regulatory initiatives. This volume is a compilation of information about the State of Florida. It contains a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature, identification of the officers and committee chairmen, and a summary of recent relevant legislative action; and the full text of relevant statutes and regulations.

None

1981-02-27T23:59:59.000Z

419

Oregon state information handbook: formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the State of Oregon. It contains a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature, identification of the officers and committee chairmen, and a summary of recent relevant legislative action; and the full text of relevant statutes and regulations.

none,

1980-12-31T23:59:59.000Z

420

Oregon state information handbook formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administater, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the State of Oregon. It contains: a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature, identification of the officers and committee chairmen, and a summary of recent relevant legislative action; and the full text of relevant statutes and regulations.

none,

1980-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Iowa state information handbook: formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with the DOE, By Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the state of Iowa. It contains: a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature, identification of the officers and committee chairmen, and a summary of recent relevant legislative action; the full test of relevant statutes and regulations.

None

1981-02-09T23:59:59.000Z

422

Site descriptions of environmental restoration units at the Oak Ridge K-25 Site, Oak Ridge, Tennessee  

SciTech Connect (OSTI)

This report, Site Descriptions of Environmental Restoration Units at the Oak Ridge K-25 Site, Oak Ridge, Tennessee, is being prepared to assimilate information on sites included in the Environmental Restoration (ER) Program of the K-25 Site, one of three major installations on the Oak Ridge Reservation (ORR) built during World War III as part of the Manhattan Project. The information included in this report will be used to establish program priorities so that resources allotted to the K-25 ER Program can be best used to decrease any risk to humans or the environment, and to determine the sequence in which any remedial activities should be conducted. This document will be updated periodically in both paper and Internet versions. Units within this report are described in individual data sheets arranged alphanumerically. Each data sheet includes entries on project status, unit location, dimensions and capacity, dates operated, present function, lifecycle operation, waste characteristics, site status, media of concern, comments, and references. Each data sheet is accompanied by a photograph of the unit, and each unit is located on one of 13 area maps. These areas, along with the sub-area, unit, and sub-unit breakdowns within them, are outlined in Appendix A. Appendix B is a summary of information on remote aerial sensing and its applicability to the ER program.

Goddard, P.L.; Legeay, A.J.; Pesce, D.S.; Stanley, A.M.

1995-11-01T23:59:59.000Z

423

Quantizations on the circle and coherent states  

E-Print Network [OSTI]

We present a possible construction of coherent states on the unit circle as configuration space. Our approach is based on Borel quantizations on S^1 including the Aharonov-Bohm type quantum description. The coherent states are constructed by Perelomov's method as group related coherent states generated by Weyl operators on the quantum phase space Z x S^1. Because of the duality of canonical coordinates and momenta, i.e. the angular variable and the integers, this formulation can also be interpreted as coherent states over an infinite periodic chain. For the construction we use the analogy with our quantization and coherent states over a finite periodic chain where the quantum phase space was Z_M x Z_M. The coherent states constructed in this work are shown to satisfy the resolution of unity. To compare them with canonical coherent states, also some of their further properties are studied demonstrating similarities as well as substantial differences.

Chadzitaskos, G; Tolar, J

2012-01-01T23:59:59.000Z

424

Analysis of wet deposition at an urban location  

SciTech Connect (OSTI)

Wet deposition data collected at the Detroit Edison urban site provided a clear chemical profile at this location for the period studied. Correlations of major anions with acidity indicate that decreases in pH are associated with increases in sulfates and nitrates. However, other components not measured may have a bearing on pH reductions. The differences between two locations 70 km apart were quite small on the average. Strong local source influences at the urban location were not evident in the limited data set available for study. Wind direction can help determine the ultimate origins of pollutants.

Foltman, R.A.

1985-01-01T23:59:59.000Z

425

Course Descriptions Page 293Sonoma State University 2008-2010 Catalog Counseling (COUN)  

E-Print Network [OSTI]

long term care concerns and elder abuse. Gender, sexual orientation, and ethnicity issues and sociopolitical-related issues of diagnosis and treatment. Attention is given to: (1) understanding and diagnostic classification systems of the DSM-IV-TR; (3) develop- ment of appropriate treatment plans; and (4

Ravikumar, B.

426

Descriptive and Critical Review of Multiregional Econometric Models of the United States  

E-Print Network [OSTI]

A Regional­ National Econometric Model of I taly . " PapersI m pact of the Regional Econometric Model on the Pol i cyG l ickman , N. J . "An Econometric Model of the P h i ladel

Herman, Amy L.

1984-01-01T23:59:59.000Z

427

HQ State HQ City Name of Primary Selectee Project Type Project Title and Brief Project Description  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietip sheetK-4In 2013 many autoThis road map is aHOW THEHQ NTEU

428

Waste receiving and processing plant control system; system design description  

SciTech Connect (OSTI)

The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.

LANE, M.P.

1999-02-24T23:59:59.000Z

429

State geothermal commercialization programs in seven Rocky Mountain States. Semi-annual progress report, January-June 1980  

SciTech Connect (OSTI)

The following are included: a summary of the state projects, a summary of findings, public outreach, and a description of the major conclusions and recommendations. The commercialization activities carried out by the state teams are described for Colorado, Montana, New Mexico, North Dakota, South Dakota, Utah, and Wyoming. (MHR)

Tuttle, J.; Coe, B.A.; Gertsch, W.D.; Meyer, R.T.

1980-12-01T23:59:59.000Z

430

Residential mobility and location choice: a nested logit model with sampling of alternatives  

E-Print Network [OSTI]

Waddell, P. : Modeling residential location in UrbanSim. In:D. (eds. ) Modelling Residential Location Choice. Springer,based model system and a residential location model. Urban

Lee, Brian H.; Waddell, Paul

2010-01-01T23:59:59.000Z

431

Subgap states in disordered superconductors  

SciTech Connect (OSTI)

We revise the problem of the density of states in disordered superconductors. Randomness of local sample characteristics translates to the quenched spatial inhomogeneity of the spectral gap, smearing the BCS coherence peak. We show that various microscopic models of potential and magnetic disorder can be reduced to a universal phenomenological random order parameter model, whereas the details of the microscopic description are encoded in the correlation function of the order parameter fluctuations. The resulting form of the density of states is generally described by two parameters: the width {Gamma} measuring the broadening of the BCS peak and the energy scale {Gamma}{sub tail} that controls the exponential decay of the density of subgap states. We refine the existing instanton approaches for determination of {Gamma}{sub tail} and show that they appear as limiting cases of a unified theory of optimal fluctuations in a nonlinear system. The application to various types of disorder is discussed.

Skvortsov, M. A., E-mail: skvor@itp.ac.ru; Feigel'man, M. V., E-mail: feigel@landau.ac.ru [Russian Academy of Sciences, Landau Institute for Theoretical Physics (Russian Federation)

2013-09-15T23:59:59.000Z

432

Short & long run transmission incentives for generation location  

E-Print Network [OSTI]

This paper is about one aspect of Britain's electricity trading system, its advantages and its weaknesses concerning the incentives it provides or fails to provide for the location of generation. (Similar considerations ...

Turvey, Ralph

2006-01-01T23:59:59.000Z

433

A Versatile Heuristic Approach for Generalized Hub Location ...  

E-Print Network [OSTI]

all costs. The hub location research has diverse sources but was standardized with the work of O'Kelly [15] and the following papers of Campbell [7, 8]. 1 ...

2014-12-08T23:59:59.000Z

434

Location and Institution SOUTH AFRICA -PRETORIA FORDHAM UNIVERSITY -UBUNTU PROGRAM  

E-Print Network [OSTI]

Location and Institution SOUTH AFRICA - PRETORIA FORDHAM UNIVERSITY - UBUNTU demographics, and South Africa. Students will also take a required module in Sociology holders need a student visa to enter and study in South Africa, which must

Galles, David

435

New approach to the fault location problem using synchronized sampling  

E-Print Network [OSTI]

This thesis presents a new approach to solving the problem of fault location on a transmission line using synchronized data from both ends of the line. The synchronized phase voltage and current samples taken during the fault transient are used...

Mrkic, Jasna

2012-06-07T23:59:59.000Z

436

Icarus 168 (2004) 249256 www.elsevier.com/locate/icarus  

E-Print Network [OSTI]

Icarus 168 (2004) 249­256 www.elsevier.com/locate/icarus TRACE observations of the 15 November 1999 of an unpublished star atlas (Kilburn et al., 2003), reported on the 31 October 1736 and 25 October 1743 transits

Schneider, Glenn

437

Energy 29 (2004) 14671478 www.elsevier.com/locate/energy  

E-Print Network [OSTI]

Energy 29 (2004) 1467­1478 www.elsevier.com/locate/energy Sensitivity of sequestration efficiency-5442/$ - see front matter # 2004 Elsevier Ltd. All rights reserved. doi:10.1016/j.energy.2004.03.080 #12

Gnanadesikan, Anand

438

Infill location determination and assessment of corresponding uncertainty  

E-Print Network [OSTI]

tried to solve this problem with statistical approaches. In this study, a reservoir simulation based approach was used to select infill well locations. I used multiple reservoir realizations to take different possible outcomes into consideration...

Senel, Ozgur

2009-05-15T23:59:59.000Z

439

Scalable Energy Efficient Location Aware Multicast Protocol for MANET (SEELAMP)  

E-Print Network [OSTI]

Multicast plays an important role in implementing the group communications in bandwidth scarce multihop mobile ad hoc networks. However, due to the dynamic topology of MANETs it is very difficult to build optimal multicast trees and maintaining group membership, making even more challenging to implement scalable and robust multicast in Mobile Ad hoc Networks (MANET). A scalable and energy efficient location aware multicast algorithm, called SEELAMP, for mobile ad hoc networks is presented in the paper that is based on creation of shared tree using the physical location of the nodes for the multicast sessions. It constructs a shared bi-directional multicast tree for its routing operations rather than a mesh, which helps in achieving more efficient multicast delivery. The algorithm uses the concept of small overlapped zones around each node for proactive topology maintenance with in the zone. Protocol depends on the location information obtained using a distributed location service, which effectively reduces th...

Kamboj, Pariza

2010-01-01T23:59:59.000Z

440

Position: Forestry Intern Location: Lower Suwannee National Wildlife Refuge  

E-Print Network [OSTI]

Position: Forestry Intern Location: Lower Suwannee National Wildlife Refuge Application Process: Student Conservation Association (SCA) Forestry and biological Wildlife Refuge. This forestry position will be mostly field work within the Lower

Mazzotti, Frank

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Rapid location of mount points JONATHAN M. SMITH  

E-Print Network [OSTI]

­­ ­­ Rapid location of mount points JONATHAN M. SMITH Computer Science Department, Columbia ``core'' is ``/u2/smith/core''. The current directory is a directory­valued variable. It is an implied

442

Microsoft Word - postdoc-career-fair-locations-maps.docx  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Los A lamos N ational L aboratory Postdoc C areer F air 2 014 Location of Events (Maps with driving instructions) Tuesday, S ept. 9 th Otowi B uilding, 3 rd F loor LANL, T A---03,...

443

Predicting threshold and location of laser damage on optical surfaces  

DOE Patents [OSTI]

An apparatus useful in the prediction of the damage threshold of various optical devices, the location of weak spots on such devices and the location, identification, and elimination of optical surface impurities comprising, a focused and pulsed laser, an photo electric detector/imaging means, and a timer. The weak spots emit photoelectrons when subjected to laser intensities that are less than the intensity actually required to produce the damage. The weak spots may be eliminated by sustained exposure to the laser beam.

Siekhaus, Wigbert (Berkeley, CA)

1987-01-01T23:59:59.000Z

444

Description of recommended non-thermal mixed waste treatment technologies: Version 1.0  

SciTech Connect (OSTI)

This document contains description of the technologies selected for inclusions in the Integrated Nonthermal Treatment Systems (INTS) Study. The purpose of these descriptions is to provide a more complete description of the INTS technologies. It supplements the summary descriptions of candidate nonthermal technologies that were considered for the INTS.

NONE

1995-08-01T23:59:59.000Z

445

The Descriptive Experience Sampling method Russell T. Hurlburt & Sarah A. Akhter  

E-Print Network [OSTI]

's [Phenomenol Cogn Sci, this issue] second- person interview method. Key words Descriptive Experience Sampling

Ahmad, Sajjad

446

Mining Building Energy Management System Data Using Fuzzy Anomaly Detection and Linguistic Descriptions  

SciTech Connect (OSTI)

Building Energy Management Systems (BEMSs) are essential components of modern buildings that utilize digital control technologies to minimize energy consumption while maintaining high levels of occupant comfort. However, BEMSs can only achieve these energy savings when properly tuned and controlled. Since indoor environment is dependent on uncertain criteria such as weather, occupancy, and thermal state, performance of BEMS can be sub-optimal at times. Unfortunately, the complexity of BEMS control mechanism, the large amount of data available and inter-relations between the data can make identifying these sub-optimal behaviors difficult. This paper proposes a novel Fuzzy Anomaly Detection and Linguistic Description (Fuzzy-ADLD) based method for improving the understandability of BEMS behavior for improved state-awareness. The presented method is composed of two main parts: 1) detection of anomalous BEMS behavior and 2) linguistic representation of BEMS behavior. The first part utilizes modified nearest neighbor clustering algorithm and fuzzy logic rule extraction technique to build a model of normal BEMS behavior. The second part of the presented method computes the most relevant linguistic description of the identified anomalies. The presented Fuzzy-ADLD method was applied to real-world BEMS system and compared against a traditional alarm based BEMS. In six different scenarios, the Fuzzy-ADLD method identified anomalous behavior either as fast as or faster (an hour or more), that the alarm based BEMS. In addition, the Fuzzy-ADLD method identified cases that were missed by the alarm based system, demonstrating potential for increased state-awareness of abnormal building behavior.

Dumidu Wijayasekara; Ondrej Linda; Milos Manic; Craig Rieger

2014-08-01T23:59:59.000Z

447

Analysis of Time Series Using Compact Model-Based Descriptions  

E-Print Network [OSTI]

Analysis of Time Series Using Compact Model-Based Descriptions Hans-Peter Kriegel, Peer Kr this is a combination of the coefficients 1, . . . , 3 representing the three input time series using a function f-of-the-art compression methods. The results are visually presented in a very concise way so that the user can easily

Kriegel, Hans-Peter

448

OSU Agricultural Composting Workshop Day 1 Title Description  

E-Print Network [OSTI]

OSU Agricultural Composting Workshop Day 1 Title Description 8:30 Registration 9:00 Welcome; provide handouts; form work groups 9:30 The composting process Stages of composting; composting methods; composting parameters (temperature, moisture, C/N ratio, pH, micro-organisms, etc.); what should I compost

Tullos, Desiree

449

SCE Classroom Lighting Guidelines 38 September 2004 Design Description  

E-Print Network [OSTI]

SCE Classroom Lighting Guidelines 38 September 2004 EXAMPLE 1 Design Description In this design, the ambient lighting system uses two, twenty foot of semi-indirect luminaires that are suspended in 2 rows electronic ballasts. The whiteboard task light is a linear wallwasher about 12 feet long that uses (3) Super

450

Exact ratchet description of Parrondo's games with self-transitions  

E-Print Network [OSTI]

Exact ratchet description of Parrondo's games with self-transitions Pau Amengual and Ra´ul Toral It is based upon the ratchet effect2 : the combination of two dynamics, both negatively biased, leading ratchet. We were able to obtain a set of equations relating the drift F(x) and diffusion D

Toral, Raúl

451

Description: Lithium batteries are used daily in our work  

E-Print Network [OSTI]

Description: Lithium batteries are used daily in our work activities from flashlights, cell phones containing one SureFire 3-volt non-rechargeable 123 lithium battery and one Interstate 3-volt non-rechargeable 123 lithium battery. A Garage Mechanic had the SureFire flashlight in his shirt pocket with the lens

452

OPTI 626-Integrated Optics and Optoelectronics Course Description  

E-Print Network [OSTI]

OPTI 626- Integrated Optics and Optoelectronics Course Description: This course aims to give a broad understanding of the physics and technology of discrete and integrated optical and optoelectronic componenents. The main focus is on important optoelectronic components such as waveguides, lasers, detectors

Arizona, University of

453

Job Description Peer Advisor/Student Success Facilitator  

E-Print Network [OSTI]

Job Description ­ Peer Advisor/Student Success Facilitator Advising and Academic Enhancement http skills Peer Advisor/Student Success Facilitator General Requirements: · Have and maintain a minimum for special events and programs · Attend mandatory Peer Advisor Training Program (May 2014) Peer Advisor

Barrash, Warren

454

TC1 Parts List Quantity Size Description **Possible Vendor  

E-Print Network [OSTI]

TC1 Parts List Quantity Size Description **Possible Vendor Source 1 3.5"od x 20" Clear Acrylic tube stripped Radio Shack Other parts as required. **This is just a list of possible vendor sources. Please note, some vendors have minimums for orders. #12;

Barrash, Warren

455

Generating Descriptions that Summarize Geospatial and Temporal Data Martin Molina  

E-Print Network [OSTI]

pattern analysis, etc. In addition, geospatial and temporal data summarization can be combined with domainGenerating Descriptions that Summarize Geospatial and Temporal Data Martin Molina Department a knowledge-based method for automatically generating summaries of geospatial and temporal data, i.e. data

Molina, Martín

456

EEE 463 Electrical Power Plants (3) [F] Course (Catalog) Description  

E-Print Network [OSTI]

. Environmental impact of electric generation (3 lectures) 9. Advanced energy conversion systems (geothermalEEE 463 Electrical Power Plants (3) [F] Course (Catalog) Description: Generation of electric power using fossil, nuclear and renewable, including solar, geothermal, wind, hydroelectric, biomass and ocean

Zhang, Junshan

457

Conceptual modelling for domain specific document description and retrieval  

E-Print Network [OSTI]

and are applied in the tasks of describing and retrieving documents, within cooperative document management settings, where the users themselves have to perform the document management tasks they need in orderConceptual modelling for domain specific document description and retrieval - An approach

458

DRAFT DRAFT Electricity and Natural Gas Sector Description  

E-Print Network [OSTI]

DRAFT DRAFT Electricity and Natural Gas Sector Description For Public Distribution AB 32 Scoping of electricity and natural gas; including electricity generation, combined heat and power, and electricity and natural gas end uses for residential and commercial purposes. Use of electricity and/or gas for industrial

459

Description of Facilities and Resources Oak Ridge National Laboratory  

E-Print Network [OSTI]

1 Description of Facilities and Resources Oak Ridge National Laboratory and the UT-ORNL Joint Institute for Computational Sciences 1. Oak Ridge National Laboratory Computer Facilities. The Oak Ridge National Laboratory (ORNL) hosts three petascale computing facilities: the Oak Ridge Leadership Computing

460

Project Application: Lie Theory and Applications Short description  

E-Print Network [OSTI]

Project Application: Lie Theory and Applications Short description Several lines of investigation. Approximations procedures on regular Fr´echet Lie groups aiming towards solving certain non-linear partial differential equations. We want to apply a new approximation procedure to nonlinear partial differential

Michor, Peter W.

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

BuildingName The Description of the Project  

E-Print Network [OSTI]

SECTION 012900 ­ PAYMENT PROCEDURES SECTION 013100 - PROJECT MANAGEMENT AND COORDINATION SECTION 013200 PROCEDURES SECTION 017823 ­ OPERATION AND MAINTENANCE MANUALS SECTION 019100 ­ FULL PROJECT COMMISSIONINGBuildingName The Description of the Project P00000000 0000 DOCUMENTS SPECIFICATION DIVISION 1

Kamat, Vineet R.

462

Canonical Ridge Analysis with Ridge Parameter Optimization Description of slides  

E-Print Network [OSTI]

Canonical Ridge Analysis with Ridge Parameter Optimization Description of slides Finn Å¡ Arup Nielsen May 25, 1998 1 First slide: The formula and an example The first slide shows a simplification is yellow/red for positive and blue for negative. Black is zero. 2 Second slide: Pros and cons The second

Nielsen, Finn Ã?rup

463

2014 Course Description Solid Waste Engineering -CE 477  

E-Print Network [OSTI]

2014 Course Description Solid Waste Engineering - CE 477 Engineering Principles of Solid Waste on course web site http://people.engr.ncsu.edu/barlaz/ Solid Waste Technology & Management by Christensen et al (eBook available through NCSU libraries) Solid waste management must be addressed by virtually

Barlaz, Morton A.

464

3A, 55V H-Bridge General Description  

E-Print Network [OSTI]

of LMD18201 October 2000 LMD182013A,55VH-Bridge © 2004 National Semiconductor Corporation DS010793 wwwLMD18201 3A, 55V H-Bridge General Description The LMD18201 is a 3A H-Bridge designed for motion control circuitry with DMOS power devices on the same monolithic structure. The H-Bridge configuration

Lozano-Nieto, Albert

465

GREEN Grid PhD Project Descriptions February 2014  

E-Print Network [OSTI]

, and with a number of electricity industry partners. The project, officially titled "Renewable Energy and the Smart Grid" will contribute to a future New Zealand with greater renewable generation and improved energy.epecentre.ac.nz. PhD Description The growth of inherently variable distributed renewable generation

Hickman, Mark

466

Accelerated Master's of Science in Biomedical Engineering Description  

E-Print Network [OSTI]

Accelerated Master's of Science in Biomedical Engineering Description The Biomedical Engineering Graduate Interdisciplinary Program, in cooperation with the College of Engineering, offers an Accelerated requirements for the Accelerated Master's Program (AMP) are set by the Office of Academic Affairs, and can

Utzinger, Urs

467

Scope and Description Laboratory Robotics and Automation seeks to  

E-Print Network [OSTI]

#12;Scope and Description Laboratory Robotics and Automation seeks to communicate developments and information about the automation of the laboratory. Application areas generally include analytical peripherals, and other robotics developments that may have an impact on laboratory automation. In the area

Kostic, Milivoje M.

468

Amsterdam Oxford Joint Rescue Forces Team Description Paper  

E-Print Network [OSTI]

Amsterdam Oxford Joint Rescue Forces Team Description Paper Virtual Robot competition Rescue van Weelden1 , Chaim Bastiaan1 , Niels Out1 , Olaf Zwennes1 , Sev´aztian Soffia Ot´arola1 , Julian de://www.jointrescueforces.eu Abstract. With the progress made in active exploration, the robots of the Joint Rescue Forces are capable

Visser, Arnoud

469

FRACTAL DESCRIPTION OF ROUGH SURFACES FOR HAPTIC DISPLAY  

E-Print Network [OSTI]

FRACTAL DESCRIPTION OF ROUGH SURFACES FOR HAPTIC DISPLAY A DISSERTATION SUBMITTED TO THE DEPARTMENT system using fractals. A background on traditional methods for describing surface roughness is given. Fractals are used to characterize one- dimensional surface profiles using two parameters, the amplitude

Stanford University

470

Volunteer Service Position Description Title: Speaking for Wildlife Presenter  

E-Print Network [OSTI]

Hampshire Cooperative Extension is an equal opportunity educator and employer University of New Hampshire, UVolunteer Service Position Description Title: Speaking for Wildlife Presenter Term: One Year Duties; (2) Actively publicize the availability of SFW presentations in your community; (3) For field walks

New Hampshire, University of

471

Inventory List Item Number Brief Description Price Preferred Vendor  

E-Print Network [OSTI]

Inventory List UT Austin Item Number Brief Description Price Preferred Vendor E0060 1 kb DNA Ladder0042 Taq DNA Polymerase - 2,000 units $224.48 NEWEN 4/21/14 Page - 1 #12;Inventory List UT Austin Item

472

Inventory List Item Number Brief Description Price Preferred Vendor  

E-Print Network [OSTI]

Inventory List UT Austin Item Number Brief Description Price Preferred Vendor Y0044 #BL21 STAR DE3.44 LIFET Y0041 Purelink Genomic DNA (50) $90.39 LIFET 4/21/14 Page - 1 #12;Inventory List UT Austin Item

473

The Description Logic ALCN HR+ Extended with Concrete Domains  

E-Print Network [OSTI]

The Description Logic ALCN HR+ Extended with Concrete Domains: A Practically Motivated Approach, role hierarchies, transitively closed roles, generalized concept inclusions, and concrete domains. As in other languages based on concrete domains (e.g. ALC(D)) a so-called ex- istential predicate restriction

Moeller, Ralf

474

The Description Logic ALCNHR + Extended with Concrete Domains  

E-Print Network [OSTI]

The Description Logic ALCNHR + Extended with Concrete Domains: A Practically Motivated Approach restrictions, role hierarchies, transitively closed roles, generalized concept inclusions, and concrete domains. As in other languages based on concrete domains (e.g. ALC(D)) a so­called ex­ istential predicate restriction

Haarslev, Volker

475

NExpTime-complete Description Logics with Concrete Domains  

E-Print Network [OSTI]

NExpTime-complete Description Logics with Concrete Domains Carsten Lutz LuFG Theoretical Computer Science RWTH Aachen, Germany lutz@cs.rwth-aachen.de Abstract. Concrete domains are an extension \\concrete properties" of objects such as sizes, weights, and durations. It is known that reasoning with ALC

Baader, Franz

476

Technical descriptions of ten irrigation technologies for conserving energy  

SciTech Connect (OSTI)

Technical description of ten technologies which were researched to save energy in irrigated agriculture are presented. These technologies are: well design and development ground water supply system optimization, column and pump redesign, variable-speed pumping, pipe network optimization, reduced-pressure center-pivot systems, low-energy precision application, automated gated-pipe system, computerized irrigation scheduling, and instrumented irrigation scheduling. (MHR)

Harrer, B.J.; Wilfert, G.L.

1983-05-01T23:59:59.000Z

477

Between Truth and Description Flemming Topse, University of Copenhagen  

E-Print Network [OSTI]

Fundamentals" and PH&FT's contribution to: Handbook on the Philosophy of Information support: Danish Natural of description, representa- tion or observation strategies) as codes. #12;Philosophy Modelling asymmetric 2: a minimum risk code : sup PP , P = inf K(A) sup PP , P = inf K(A) R(|P) Theorem A P optimal P Max

Topsøe, Flemming

478

ABox Abduction in Description Logic MSc Thesis (Afstudeerscriptie)  

E-Print Network [OSTI]

ABox Abduction in Description Logic MSc Thesis (Afstudeerscriptie) written by Szymon Klarman (born elaborate on logic-based automated reasoning tech- niques for abduction, driven by the principle of goal-oriented rea- soning. In the first part we develop two variants of a computational framework for abduction

Amsterdam, University of

479

Flammable gas tank exhauster interlock (FGTEI) computer software design description  

SciTech Connect (OSTI)

Modicon Compact Programmable Logic Controller (PLC). The device configuration integrates the isolation and current- carrying capacities of mechanical relays with the logic and programming sophistication of the PLC. This revised document provides descriptions of components and tasks involved in the PLC system for controlling and monitoring the FGTEI. All control functions required by the PLC, and how they are implemented, are described in detail.

Smith, S.O., Westinghouse Hanford

1996-09-20T23:59:59.000Z

480

Flammable gas tank exhauster interlock (FGTEI) computer software design description  

SciTech Connect (OSTI)

Modicon Compact Programmable Logic Controller (PLC). The device configuration integrates the isolation and current-carrying capacities of mechanical relays with the logic and programming sophistication of the PLC. This document provides descriptions of components and tasks involved in the PLC system for controlling and monitoring the FGTEI. All control functions required by the PLC, and how they are implemented, are described in detail.

Smith, S.0.

1996-09-10T23:59:59.000Z

Note: This page contains sample records for the topic "location state description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Flammable gas tank exhauster interlock (LFGTEI) computer software design description  

SciTech Connect (OSTI)

Modicon Compact Programmable Logic Controller (PLC). The device configuration integrates the isolation and current- carrying capacities of mechanical relays with the logic and programming sophistication of the PLC. This revised document provides descriptions of components and tasks involved in the PLC system for controlling and monitoring the FGTEI. All control functions required by the PLC, and how they are implemented, are described in detail.

Smith, S.O.; Irvitt, R.W., Fluor Daniel Hanford

1997-02-21T23:59:59.000Z

482

Description Sound Devices USBPre is a complete, portable hardware  

E-Print Network [OSTI]

Description Sound Devices USBPre is a complete, portable hardware interface for PC and Mac audio electronics, and S/PDIF digital sources with personal computers. Its high-performance, 24-bit 9.x and Windows. SOUND DEVICES #12;Specifications Frequency Response: (reference 1 kHz) 10 Hz - 20 k

483

Topographic and Air-Photo Lineaments in Various Locations Related to Geothermal Exploration in Colorado  

SciTech Connect (OSTI)

Title: Topographic and Air-Photo Lineaments in Various Locations Related to Geothermal Exploration in Colorado Tags: Colorado, lineaments, air-photo, geothermal Summary: These line shapefiles trace apparent topographic and air-photo lineaments in various counties in Colorado. It was made in order to identify possible fault and fracture systems that might be conduits for geothermal fluids, as part of a DOE reconnaissance geothermal exploration program. Description: Geothermal fluids commonly utilize fault and fractures in competent rocks as conduits for fluid flow. Geothermal exploration involves finding areas of high near-surface temperature gradients, along with a suitable “plumbing system” that can provide the necessary permeability. Geothermal power plants can sometimes be built where temperature and flow rates are high. This line shapefile is an attempt to use desktop GIS to delineate possible faults and fracture orientations and locations in highly prospective areas prior to an initial site visit. Geochemical sampling and geologic mapping could then be centered around these possible faults and fractures. To do this, georeferenced topographic maps and aerial photographs were utilized in an existing GIS, using ESRI ArcMap 10.0 software. The USA_Topo_Maps and World_Imagery map layers were chosen from the GIS Server at server.arcgisonline.com, using a UTM Zone 13 NAD27 projection. This line shapefile was then constructed over that which appeared to be through-going structural lineaments in both the aerial photographs and topographic layers, taking care to avoid manmade features such as roads, fence lines, and utility right-of-ways. Still, it is unknown what actual features these lineaments, if they exist, represent. Although the shapefiles are arranged by county, not all areas within any county have been examined for lineaments. Work was focused on either satellite thermal infrared anomalies, known hot springs or wells, or other evidence of geothermal systems. Finally, lineaments may be displaced somewhat from their actual location, due to such factors as shadow effects with low sun angles in the aerial photographs. Projection Information: UTM Zone 13 NAD 27 projection Credits: These lineament shapefile was created by Geothermal Development Associates, as part of a geothermal geologic reconnaissance performed by Flint Geothermal, LLC, of Denver Colorado. Funding was provided in part by DOE Grant DE-EEE0002828. Use Limitation These shapefiles was constructed as an aid to geothermal exploration in preparation for a site visit for field checking. We make no claims as to the existence of the lineaments, their location, orientation, and/or nature.

Zehner, Richard

2012-02-01T23:59:59.000Z

484

Neurocomputing 5860 (2004) 285290 www.elsevier.com/locate/neucom  

E-Print Network [OSTI]

eliminated. We illustrate this approach by modeling self-sustained stochastic states in networks level, the ÿrst step is to reproduce self-sustained stochastic states of activity, as found in neocortex activity in cortical slices [9]. Indeed, a number of computational models have reported states of self-sustained

Destexhe, Alain

485

Health, Safety & Environment System Description and Worker Safety...  

National Nuclear Security Administration (NNSA)

packet, HS&E communication alerts, briefings, and team involvement. HS&E Web Page: The HS&E web page is located on the FM&T Intranet and provides access to listings...

486

Gendering Representation: Parties, Institutions, and the Under-Representation Of Women In Brazil's State Legislatures  

E-Print Network [OSTI]

This dissertation provides insights on what influences women's descriptive representation in state legislatures in Brazil. The study of female representation in Brazil provides for a good case study as the country uses a ...

dos Santos, Pedro G.

2012-12-31T23:59:59.000Z

487

State geothermal commercialization programs in ten Rocky Mountain states. Semi-annual progress report, July-December 1979  

SciTech Connect (OSTI)

The activities and findings of the ten state teams participating in the Rocky Mountain Basin and Range Regional Hydrothermal Commercialization Program for the period are described. A summary of the state projects, compilation of project accomplishments, summary of findings, and a description of the major conclusions and recommendations are presented. Also included are chapters on the commercialization activities carried out by individual teams in each state: Arizona, Colorado, Idaho, Montana, Nevada, New-Mexico, North Dakota, South Dakota, Utah, and Wyoming. (MHR)

Griffith, J.L. (comp.)

1980-08-01T23:59:59.000Z

488

Predicting threshold and location of laser damage on optical surfaces  

DOE Patents [OSTI]

Disclosed is an apparatus useful in the prediction of the damage threshold of various optical devices, the location of weak spots on such devices and the location, identification, and elimination of optical surface impurities. The apparatus comprises a focused and pulsed laser, a photo electric detector/imaging means, and a timer. The weak spots emit photoelectrons when subjected to laser intensities that are less than the intensity actually required to produce the damage. The weak spots may be eliminated by sustained exposure to the laser beam.

Siekhaus, W.

1985-02-04T23:59:59.000Z

489

Method for locating metallic nitride inclusions in metallic alloy ingots  

DOE Patents [OSTI]

A method of determining the location and history of metallic nitride and/or oxynitride inclusions in metallic melts. The method includes the steps of labeling metallic nitride and/or oxynitride inclusions by making a coreduced metallic-hafnium sponge from a mixture of hafnium chloride and the chloride of a metal, reducing the mixed chlorides with magnesium, nitriding the hafnium-labeled metallic-hafnium sponge, and seeding the sponge to be melted with hafnium-labeled nitride inclusions. The ingots are neutron activated and the hafnium is located by radiometric means. Hafnium possesses exactly the proper metallurgical and radiochemical properties for this use.

White, Jack C. (Albany, OR); Traut, Davis E. (Corvallis, OR); Oden, Laurance L. (Albany, OR); Schmitt, Roman A. (Corvallis, OR)

1992-01-01T23:59:59.000Z

490

PHS 650 Summer 2012 Page 1 State-Level Health System and Coverage Reform  

E-Print Network [OSTI]

and Affordable Care Act Current State-Level Trends and Health Reforms The Syllabus includes a variety of readingPHS 650 Summer 2012 Page 1 State-Level Health System and Coverage Reform Course Overview and Syllabus Description: Overview of the state initiatives in health care coverage, access, and costs, trends

Sheridan, Jennifer

491

Microscopic description of the beta delayed deuteron emission from [sup 6]He  

SciTech Connect (OSTI)

The beta delayed deuteron emission from [sup 6]He is studied in a dynamical microscopic cluster model. This model gives a reasonably good description for all the subsystems of [sup 6]He and [sup 6]Li in a coherent way, without any free parameter. The beta decay transition probability to the [sup 6]Li ground state is underestimated by a few percent. The theoretical beta delayed deuteron spectrum is close to experiment but it is also underestimated, by about a factor of 1.7. We argue that, in spite of their different magnitudes, both underestimations might have a common origin. The model confirms that the neutron halo part of the [sup 6]He wave function plays a crucial role in quenching the beta decay toward the [alpha]+[ital d] channel.

Csoto, A.; Baye, D. (Physique Nucleaire Theorique et Physique Mathematique, C.P. 229, Campus Plaine, Universite Libre de Bruxelles, B-1050 Brussels (Belgium) Institute of Nuclear Research of the Hungarian Academy of Sciences, P.O. Box 51 Debrecen, H-4001 (Hungary))

1994-02-01T23:59:59.000Z

492

Phase-Space Description of Momentum Spectra in Relativistic Heavy-Ion Collisions  

E-Print Network [OSTI]

We consider a phase-space model for particle production in nuclear collisions. Once the multiplicities of the individual particle species are known, single-inclusive momentum spectra can be computed after making simplifying assumptions for the matrix element for multiparticle production. Comparison of the calculated spectra with data for pions and kaons from central Pb+Pb collisions at E_{Lab}=158 AGeV reveals a residual longitudinal phase-space dominance in the final state of the reaction. We account for this by modifying the isotropic, relativistic invariant phase space in a way which retains boost invariance in beam direction but suppresses large transverse momenta. Adjusting a single parameter, we obtain a reasonably good description of transverse momentum and rapidity spectra for both pions and kaons.

Deinet, W; Deinet, Werner; Rischke, Dirk H.

2006-01-01T23:59:59.000Z

493

Domain-specific Web Service Discovery with Service Class Descriptions  

SciTech Connect (OSTI)

This paper presents DynaBot, a domain-specific web service discovery system. The core idea of the DynaBot service discovery system is to use domain-specific service class descriptions powered by an intelligent Deep Web crawler. In contrast to current registry-based service discovery systems--like the several available UDDI registries--DynaBot promotes focused crawling of the Deep Web of services and discovers candidate services that are relevant to the domain of interest. It uses intelligent filtering algorithms to match services found by focused crawling with the domain-specific service class descriptions. We demonstrate the capability of DynaBot through the BLAST service discovery scenario and describe our initial experience with DynaBot.

Rocco, D; Caverlee, J; Liu, L; Critchlow, T J

2005-02-14T23:59:59.000Z

494

Nonlocal description of a falling body through the air  

E-Print Network [OSTI]

In this present work we consider a falling body through the air under the influence of gravity. In particular, we consider the experimental data based upon the free fall of six men in the atmosphere of the earth. In order to describe this process we employ a nonlocal dissipative force. We show that our description, by using an exponential memory kernel, can fit the experimental data as well as that of a local dissipative force.

Kwok Sau Fa

2008-10-02T23:59:59.000Z

495

Theoretical descriptions of compound-nuclear reactions: open problems & challenges  

E-Print Network [OSTI]

Compound-nuclear processes play an important role for nuclear physics applications and are crucial for our understanding of the nuclear many-body problem. Despite intensive interest in this area, some of the available theoretical developments have not yet been fully tested and implemented. We revisit the general theory of compound-nuclear reactions, discuss descriptions of pre-equilibrium reactions, and consider extensions that are needed in order to get cross section information from indirect measurements.

Brett V. Carlson; Jutta E. Escher; Mahir S. Hussein

2014-03-04T23:59:59.000Z

496

Cold Vacuum Drying (CVD) Electrical System Design Description  

SciTech Connect (OSTI)

This system design description (SDD) provides a technical explanation of the design and operation of the electrical system for the Cold Vacuum Drying Facility (CVDF). This SDD also identifies the requirements, and the basis for the requirements and details on how the requirements have been implemented in the design and construction of the facility. This SDD also provides general guidance for the surveillance, testing, and maintenance of this system.

SINGH, G.

2000-05-01T23:59:59.000Z

497

Automatic TLI recognition system. Part 1: System description  

SciTech Connect (OSTI)

This report describes an automatic target recognition system for fast screening of large amounts of multi-sensor image data, based on low-cost parallel processors. This system uses image data fusion and gives uncertainty estimates. It is relatively low cost, compact, and transportable. The software is easily enhanced to expand the system`s capabilities, and the hardware is easily expandable to increase the system`s speed. This volume gives a general description of the ATR system.

Partin, J.K.; Lassahn, G.D.; Davidson, J.R.

1994-05-01T23:59:59.000Z

498

Fast Detector Simulation Using Lelaps, Detector Descriptions in GODL  

SciTech Connect (OSTI)

Lelaps is a fast detector simulation program which reads StdHep generator files and produces SIO or LCIO output files. It swims particles through detectors taking into account magnetic fields, multiple scattering and dE/dx energy loss. It simulates parameterized showers in EM and hadronic calorimeters and supports gamma conversions and decays. In addition to three built-in detector configurations, detector descriptions can also be read from files in the new GODL file format.

Langeveld, Willy; /SLAC

2005-07-06T23:59:59.000Z

499

Property:OpenEI/PageDescription | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revisionEnvReviewNonInvasiveExploration Jump to:FieldProceduresFY Description URLs to

500

Usefulness of bound-state approximations in reaction theory  

SciTech Connect (OSTI)

A bound-state approximation when applied to certain operators, such as the many-body resolvent operator for a two-body fragmentation channel, in many-body scattering equations, reduces such equations to equivalent two-body scattering equations which are supposed to provide a good description of the underlying physical process. In this paper we test several variants of bound-state approximations in the soluble three-boson Amado model and find that such approximations lead to weak and unacceptable kernels for the equivalent two-body scattering equations and hence to a poor description of the underlying many-body process.

Adhikari, S.K.

1981-08-01T23:59:59.000Z