National Library of Energy BETA

Sample records for liters lb pounds

  1. LB CRAC Workshops (rates/meetings)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Load-Based (LB) CRAC Power Rate Adjustment Workshop Materials Related Links: Power Rate Adjustments > Load-Based (LB) CRAC December 13, 2006 LB CRAC Workshop Materials (updated...

  2. Sandia National Laboratories: 39,000 Pounds of Ceiling Tiles...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    39,000 Pounds of Ceiling Tiles Recycled December 21, 2010 ceiling tile shipment Ceiling tile shipment It took over two years to accumulate, but Sandia National LaboratoriesNew...

  3. Site Recycles Millions of Pounds of Metal | Department of Energy

    Energy Savers [EERE]

    Site Recycles Millions of Pounds of Metal Site Recycles Millions of Pounds of Metal May 30, 2013 - 12:00pm Addthis The Portsmouth site worked with two regional companies and local law enforcement to arrange transportation of 10 massive synchronous condensers as part of an asset recovery effort. The Portsmouth site worked with two regional companies and local law enforcement to arrange transportation of 10 massive synchronous condensers as part of an asset recovery effort. PIKETON, Ohio - The EM

  4. Turbocharging the Chrysler 2. 2 liter engine

    SciTech Connect (OSTI)

    Allen, F.E.; Rinschler, G.L.

    1984-01-01

    A new turbocharged 2.2 liter engine has been developed by Chrysler Corporation. It is derived from the Chrysler 2.2 liter naturally aspirated four cylinder powerplant. A number of new and redesigned components were required to yield a durable, high performance.

  5. Load-Based (LB) CRAC (rates/adjustments)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    absolutely will change. June 10, 2003 LB CRAC Workshop: Presentation on Impacts of the Enron Settlement on LB CRAC (PDF, 6 pages, 24 kb, posted June 11, 2003) Related follow-up...

  6. New 11 liter Komatsu diesel engine

    SciTech Connect (OSTI)

    Mizusawa, M.; Tanosaki, T.; Kawase, M.; Oguchi, T.

    1984-01-01

    New 6 cylinder direct injection 11 liter diesel engines which have naturally aspirated, turbocharged, and turbocharged-aftercooled versions have been developed and moved in production at the end of 1983. The highest output of the turbocharged-aftercooled version is 276 kW (375 ps) at 2200 RPM. Based on Komatsu new technologies 125 mm bore diesel has been designed to meet the users' demands, such as compact in size, light in weight, extremely high performance, high reliability and durability. The turbocharged and turbocharged-aftercooled engines are characterized by the adoption of the ductile cast iron piston which is the first application into the high speed, four cycle diesels in production in the world, and which was enabled by Komatsu design and precision casting technologies. This paper also covers the other design aspects and performance characteristics.

  7. Idaho Crews Overcome Challenges to Safely Dispose 1-Million-Pound...

    Office of Environmental Management (EM)

    1-Million-Pound Hot Cell IDAHO FALLS, Idaho - American Recovery and Reinvestment Act cleanup crews at the Idaho site recently disposed of a hot cell as heavy as nine fully ...

  8. DOE Employees, Contractors Donate More than 15,500 Pounds of Food

    Broader source: Energy.gov [DOE]

    PIKETON, Ohio ̶ As part of the federal government’s Feds Feed Families campaign, employees at the Portsmouth Gaseous Diffusion Plant donated 15,681 pounds of canned goods and other items to local food pantries in 2014.

  9. Table 4.10 Uranium Reserves, 2008 (Million Pounds Uranium Oxide)

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Uranium Reserves,1 2008 (Million Pounds Uranium Oxide) State Forward-Cost 2 Category (dollars 3 per pound) $50 or Less $100 or Less Total 539 1,227 Wyoming 220 446 New Mexico 179 390 Arizona, Colorado, Utah 63 198 Texas 27 40 Others 4 50 154 1The U.S. Energy Information Administration (EIA) category of uranium reserves is equivalent to the internationally reported category of "Reasonably Assured Resources" (RAR). Notes: * Estimates are at end of year. * See "Uranium Oxide"

  10. Portsmouth/Paducah Employees, Contractors Donate 17,500 Pounds of Food

    Broader source: Energy.gov [DOE]

    LEXINGTON, Ky. – Employees and contractors of EM’s Portsmouth/Paducah Project Office (PPPO) donated more than 17,541 pounds of food to families in need in their local communities as part of the federal government’s 2014 Feds Feed Families campaign.

  11. Development of radiological concentrations and unit liter doses for TWRS FSAR radiological consequence calculations

    SciTech Connect (OSTI)

    Cowley, W.L.

    1996-04-25

    The analysis described in this report develops the Unit Liter Doses for use in the TWRS FSAR. The Unit Liter Doses provide a practical way to calculate conservative radiological consequences for a variety of potential accidents for the tank farms.

  12. U.S. Department of Energy Donates More Than 120,000 Pounds of Food to "Feds

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Feed Families" | Department of Energy Donates More Than 120,000 Pounds of Food to "Feds Feed Families" U.S. Department of Energy Donates More Than 120,000 Pounds of Food to "Feds Feed Families" September 29, 2010 - 12:00am Addthis WASHINGTON, D.C. - Energy Secretary Steven Chu today announced that U.S. Department of Energy employees and contractors collected and donated more than 120,000 pounds of food and supplies during the federal government's second annual

  13. NREL Staff Donates More Than 1,000 Pounds of Food for the Needy - News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Releases | NREL Staff Donates More Than 1,000 Pounds of Food for the Needy July 5, 2012 Employees at the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) donated enough food in a recent drive to feed 50 adults and 100 children for a week. "It was a fantastic turnout," Erika Echols, NREL's staff council president, said. "Our executive managers set up a booth and boxed all the food that was contributed. We had 24 more boxes than we did a year ago."

  14. Neutron Reference Benchmark Field Specification: ACRR 44 Inch Lead-Boron (LB44) Bucket Environment (ACRR-LB44-CC-32-CL).

    SciTech Connect (OSTI)

    Vega, Richard Manuel; Parma, Edward J.; Griffin, Patrick J.; Vehar, David W.

    2015-07-01

    This report was put together to support the International Atomic Energy Agency (IAEA) REAL- 2016 activity to validate the dosimetry community’s ability to use a consistent set of activation data and to derive consistent spectral characterizations. The report captures details of integral measurements taken in the Annular Core Research Reactor (ACRR) central cavity with the 44 inch Lead-Boron (LB44) bucket, reference neutron benchmark field. The field is described and an “a priori” calculated neutron spectrum is reported, based on MCNP6 calculations, and a subject matter expert (SME) based covariance matrix is given for this “a priori” spectrum. The results of 31 integral dosimetry measurements in the neutron field are reported.

  15. LBL-26762 Co4F49.0.274 LB Lawrence Berkeley Laboratory UNIVERSITY OF CALIFORNIA

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    26762 Co4F49.0.274 LB Lawrence Berkeley Laboratory UNIVERSITY OF CALIFORNIA Materials & Chemical Sciences Division Presented at the International Symposium on Near-Future Chemistry in Nuclear Energy Field, Ibaraki-Ken, Japan, February 15-16, 1989, and to be published in the Proceedings Molecular Beam Studies of Hot Atom Chemical Reactions: Reactive Scattering of Energetic Deuterium Atoms R.E. Continetti, B.A. Balko, and Y.T. Lee February 1989 Prepared for the U.S. Department of Energy under

  16. MOA-2013-BLG-220Lb: Massive planetary companion to galactic-disk host

    SciTech Connect (OSTI)

    Yee, J. C.; Gould, A.; Gaudi, B. S.; Han, C.; Choi, J.-Y.; Hwang, K.-H.; Jung, Y. K.; Skowron, J.; Udalski, A.; Bond, I. A.; Hundertmark, M.; Monard, L. A. G.; Porritt, I.; Nelson, P.; Bozza, V.; Albrow, M. D.; Christie, G. W.; DePoy, D. L.; Lee, C.-U.; McCormick, J.; Collaboration: μFUN Collaboration),; MOA Collaboration),; OGLE Collaboration),; RoboNet Collaboration),; and others

    2014-07-20

    We report the discovery of MOA-2013-BLG-220Lb, which has a super-Jupiter mass ratio q = 3.01 ± 0.02 × 10{sup –3} relative to its host. The proper motion, μ = 12.5 ± 1 mas yr{sup –1}, is one of the highest for microlensing planets yet discovered, implying that it will be possible to separately resolve the host within ∼7 yr. Two separate lines of evidence imply that the planet and host are in the Galactic disk. The planet could have been detected and characterized purely with follow-up data, which has important implications for microlensing surveys, both current and into the Large Synoptic Survey Telescope (LSST) era.

  17. Record production on Gary No. 13 blast furnace with 450 lb./THM co-injection rates

    SciTech Connect (OSTI)

    Schuett, K.J.; White, D.G.

    1996-12-31

    Coal injection was initiated on No. 13 Blast Furnace in 1993 with 400 lb/THM achieved in 9 months. In early 1994, cold weather and coal preparation upsets led to the use of a second injectant, oil atomized by natural gas, to supplement the coal. Various combinations of coal and oil were investigated as total injection was increased to 450 lb/THM. Beginning in the last half of 1994, a continuing effort has been made to increase furnace production while maintaining this high co-injection level. Typical furnace production is now in excess of 10,000 THM/day compared with about 8500 THM/day in late 1993.

  18. U. S. Attic Grsrgy 'bmiss~o3 U. S. Atomic lb-al-w CamLf3sion December 27, S.957

    Office of Legacy Management (LM)

    a . - 3 U. S. Attic Grsrgy 'bmiss~o3 U. S. Atomic lb-al-w CamLf3sion December 27, S.957

  19. OGLE-2008-BLG-355Lb: A massive planet around a late-type star

    SciTech Connect (OSTI)

    Koshimoto, N.; Sumi, T.; Fukagawa, M.; Shibai, H.; Udalski, A.; Bennett, D. P.; Bond, I. A.; Ling, C. H.; Rattenbury, N.; Botzler, C. S.; Freeman, M.; Abe, F.; Furusawa, K.; Itow, Y.; Masuda, K.; Matsubara, Y.; Fukui, A.; Muraki, Y.; Ohnishi, K.; Saito, To.; Collaboration: MOA Collaboration; OGLE Collaboration; and others

    2014-06-20

    We report the discovery of a massive planet, OGLE-2008-BLG-355Lb. The light curve analysis indicates a planet:host mass ratio of q = 0.0118 ± 0.0006 at a separation of 0.877 ± 0.010 Einstein radii. We do not measure a significant microlensing parallax signal and do not have high angular resolution images that could detect the planetary host star. Therefore, we do not have a direct measurement of the host star mass. A Bayesian analysis, assuming that all host stars have equal probability to host a planet with the measured mass ratio, implies a host star mass of M{sub h}=0.37{sub −0.17}{sup +0.30} M{sub ⊙} and a companion of mass M{sub P}=4.6{sub −2.2}{sup +3.7}M{sub J}, at a projected separation of r{sub ⊥}=1.70{sub −0.30}{sup +0.29} AU. The implied distance to the planetary system is D {sub L} = 6.8 ± 1.1 kpc. A planetary system with the properties preferred by the Bayesian analysis may be a challenge to the core accretion model of planet formation, as the core accretion model predicts that massive planets are far more likely to form around more massive host stars. This core accretion model prediction is not consistent with our Bayesian prior of an equal probability of host stars of all masses to host a planet with the measured mass ratio. Thus, if the core accretion model prediction is right, we should expect that follow-up high angular resolution observations will detect a host star with a mass in the upper part of the range allowed by the Bayesian analysis. That is, the host would probably be a K or G dwarf.

  20. Assessment of the Group 5-6 (LB C2, LB S2, LV S1) Stack Sampling Probe Locations for Compliance with ANSI/HPS N13.1 1999

    SciTech Connect (OSTI)

    Glissmeyer, John A.; Flaherty, Julia E.; Piepel, Gregory F.

    2011-03-11

    This document reports on a series of tests to assess the proposed air sampling locations for the Hanford Tank Waste Treatment and Immobilization Plant (WTP) Group 5-6 exhaust stacks with respect to the applicable criteria regarding the placement of an air sampling probe. The LB-C2, LV-S1, and LB S2 exhaust stacks were tested together as a group (Test Group 5-6) because the common factor in their design is that the last significant flow disturbance upstream of the air sampling probe is a reduction in duct diameter. Federal regulations( ) require that a sampling probe be located in the exhaust stack according to the criteria of the American National Standards Institute/Health Physics Society (ANSI/HPS) N13.1-1999, Sampling and Monitoring Releases of Airborne Radioactive Substances from the Stack and Ducts of Nuclear Facilities. These criteria address the capability of the sampling probe to extract a sample that represents the effluent stream. The testing on scale models of the stacks conducted for this project was part of the River Protection Project—Waste Treatment Plant Support Program under Contract No. DE-AC05-76RL01830 according to the statement of work issued by Bechtel National Inc. (BNI, 24590-QL-SRA-W000-00101, N13.1-1999 Stack Monitor Scale Model Testing and Qualification, Revision 1, 9/12/2007) and Work Authorization 09 of Memorandum of Agreement 24590-QL-HC9-WA49-00001. The internal Pacific Northwest National Laboratory (PNNL) project for this task is 53024, Work for Hanford Contractors Stack Monitoring. The testing described in this document was further guided by the Test Plan Scale Model Testing the Waste Treatment Plant LB-C2, LB-S2, and LV-S1 (Test Group 5-6) Stack Air Sampling Positions (TP-RPP-WTP-594). The tests conducted by PNNL during 2009 and 2010 on the Group 5-6 scale model systems are described in this report. The series of tests consists of various measurements taken over a grid of points in the duct cross-section at the designed sampling probe locations and at five duct diameters up and downstream from the design location to accommodate potential construction variability. The tests were done only at the design sampling probe location on the scale model of LB-S2 because that ductwork was already constructed. The ANSI/HPS N13.1-1999 criteria and the corresponding results of the test series on the scale models are summarized in this report.

  1. The development of an integrated multistage fluid bed retorting process. [Kentort II process--50-lb/hr

    SciTech Connect (OSTI)

    Carter, S.; Stehn, J.; Vego, A.; Taulbee, D.

    1992-05-01

    This report summarizes the progress made on the development of an integrated multistage fluidized bed retorting process (KENTORT II) during the period of January 1, 1992 through March 31, 1992. The KENTORT II process includes integral fluidized bed zones for pyrolysis, gasification, and combustion of the oil shale. The purpose of this program is to design and test the KENTORT II process at the 50-lb/hr scale. The design of the 50-lb/hr KENTORT II retort was completed and fabrication is ready to begin. Data from the cold-flow model of the system and operating experience from the 5-lb/hr unit were used as the basis for the design. In another aspect of the program, a study of the cracking and coking kinetics of shale oil vapors was continued. A mathematical model was implemented to characterize the important mass transfer effects of the system. This model will be eventually broadened to become a general fluidized bed coking model. In addition, experiments were performed to examine the effects of surface area, initial carbon content and steam treatment on coking activity. From the data that has been collected to-date, it appears that the coking activity of the tested substrates can be explained in terms of porosity (surface area and pore volume) and the initial carbon content of the solid.

  2. Criticality experiments with planar arrays of three-liter bottles containing plutonium nitrate solution

    SciTech Connect (OSTI)

    Durst, B.M.; Clayton, E.D.; Smith, J.H.

    1985-01-01

    The objective of these experiments was to provide benchmark data to validate calculational codes used in critically safety assessments of plant configurations. Arrays containing up to as many as sixteen three-liter bottles filled with plutonium nitrate were used in the experiments. A split-table device was used in the final assembly of the arrays. Ths planar arrays were reflected with close fitting plexiglas on each side and on the bottom but not the top surface. The experiments addressed a number of factors effecting criticality: the critical air gap between bottles in an array of fixed number of bottles, the number of bottles required for criticality if the bottles were touching, and the effect on critical array spacing and critical bottle number due to the insertion of an hydrogeneous substance into the air gap between bottles. Each bottle contained about 2.4l of Pu(NO{sub 3}){sub 4} solution at a Pu concentration of 105g Pu/l, with the {sup 240}Pu content being 2.9 wt% at a free acid molarity H{sup +} of 5.1. After the initial series of experiments were performed with bottles separated by air gaps, plexiglas shells of varying thicknesses were placed around each bottle to investigate how moderation between bottles affects both the number of bottles required for criticality and the critical spacing between each bottle. The minimum of bottles required for criticality was found to be 10.9 bottles, occurring for a square array with bottles in contact. As the bottles were spaced apart, the critical number increased. For sixteen bottles in a square array, the critical separation between surfaces in both x and y direction was 0.96 cm. The addition of plexiglas around each bottle decreased the critical bottle number, compared to those separated in air, but the critical bottle number, even with interstitial plastic in place was always greater than 10.9 bottles. The most reactive configuration was a tightly packed array of bottles with no intervening material.

  3. Identification and In-vivo Characterization of a Novel OhrR Transcriptional Regulator in Burkholderia xenovorans LB400

    SciTech Connect (OSTI)

    Nguyen, Tinh T.; Mart-Arbona, Ricardo; Hall, Richard S.; Maity, Tuhin; Valdez, Yolanda E.; Dunbar, John M.; Unkefer, Clifford J.; Unkefer, Pat J.

    2013-05-21

    Transcriptional regulators (TRs) are an important and versatile group of proteins, yet very little progress has been achieved towards the discovery and annotation of their biological functions. We have characterized a previously unknown organic hydroperoxide resistance regulator from Burkholderia xenovoransLB400, Bxe_B2842, which is homologous to E. colis OhrR. Bxe_B2842 regulates the expression of an organic hydroperoxide resistance protein (OsmC). We utilized frontal affinity chromatography coupled with mass spectrometry (FAC-MS) and electrophoretic mobility gel shift assays (EMSA) to identify and characterize the possible effectors of the regulation by Bxe_B2842. Without an effector, Bxe_B2842 binds a DNA operator sequence (DOS) upstream of osmC. FAC-MS results suggest that 2-aminophenol binds to the protein and is potentially an effector molecule. EMSA analysis shows that 2-aminophenol also attenuates the Bxe_B2842s affinity for its DOS. EMSA analysis also shows that organic peroxides attenuate Bxe_B2842/DOS affinity, suggesting that binding of the TR to its DOS is regulated by the two-cysteine mechanism, common to TRs in this family. Bxe_B2842 is the first OhrR TR to have both oxidative and effector-binding mechanisms of regulation. Our paper reveals further mechanistic diversity TR mediated gene regulation and provides insights into methods for function discovery of TRs.

  4. Identification and In-vivo Characterization of a Novel OhrR Transcriptional Regulator in Burkholderia xenovorans LB400

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Nguyen, Tinh T.; Martí-Arbona, Ricardo; Hall, Richard S.; Maity, Tuhin; Valdez, Yolanda E.; Dunbar, John M.; Unkefer, Clifford J.; Unkefer, Pat J.

    2013-05-21

    Transcriptional regulators (TRs) are an important and versatile group of proteins, yet very little progress has been achieved towards the discovery and annotation of their biological functions. We have characterized a previously unknown organic hydroperoxide resistance regulator from Burkholderia xenovoransLB400, Bxe_B2842, which is homologous to E. coli’s OhrR. Bxe_B2842 regulates the expression of an organic hydroperoxide resistance protein (OsmC). We utilized frontal affinity chromatography coupled with mass spectrometry (FAC-MS) and electrophoretic mobility gel shift assays (EMSA) to identify and characterize the possible effectors of the regulation by Bxe_B2842. Without an effector, Bxe_B2842 binds a DNA operator sequence (DOS) upstream ofmore » osmC. FAC-MS results suggest that 2-aminophenol binds to the protein and is potentially an effector molecule. EMSA analysis shows that 2-aminophenol also attenuates the Bxe_B2842’s affinity for its DOS. EMSA analysis also shows that organic peroxides attenuate Bxe_B2842/DOS affinity, suggesting that binding of the TR to its DOS is regulated by the two-cysteine mechanism, common to TRs in this family. Bxe_B2842 is the first OhrR TR to have both oxidative and effector-binding mechanisms of regulation. Our paper reveals further mechanistic diversity TR mediated gene regulation and provides insights into methods for function discovery of TRs.« less

  5. Research, development and demonstration of nickel-zinc batteries for electric vehicle propulsion. Annual report, 1979. [70 W/lb

    SciTech Connect (OSTI)

    Not Available

    1980-06-01

    This second annual report under Contract No. 31-109-39-4200 covers the period July 1, 1978 through August 31, 1979. The program demonstrates the feasibility of the nickel-zinc battery for electric vehicle propulsion. The program is divided into seven distinct but highly interactive tasks collectively aimed at the development and commercialization of nickel-zinc technology. These basic technical tasks are separator development, electrode development, product design and analysis, cell/module battery testing, process development, pilot manufacturing, and thermal management. A Quality Assurance Program has also been established. Significant progress has been made in the understanding of separator failure mechanisms, and a generic category of materials has been specified for the 300+ deep discharge (100% DOD) applications. Shape change has been reduced significantly. A methodology has been generated with the resulting hierarchy: cycle life cost, volumetric energy density, peak power at 80% DOD, gravimetric energy density, and sustained power. Generation I design full-sized 400-Ah cells have yielded in excess of 70 W/lb at 80% DOD. Extensive testing of cells, modules, and batteries is done in a minicomputer-based testing facility. The best life attained with electric vehicle-size cell components is 315 cycles at 100% DOD (1.0V cutoff voltage), while four-cell (approx. 6V) module performance has been limited to about 145 deep discharge cycles. The scale-up of processes for production of components and cells has progressed to facilitate component production rates of thousands per month. Progress in the area of thermal management has been significant, with the development of a model that accurately represents heat generation and rejection rates during battery operation. For the balance of the program, cycle life of > 500 has to be demonstrated in modules and full-sized batteries. 40 figures, 19 tables. (RWR)

  6. Assessment of Waste Treatment Plant Lab C3V (LB-S1) Stack Sampling Probe Location for Compliance with ANSI/HPS N13.1-1999

    SciTech Connect (OSTI)

    Glissmeyer, John A.; Geeting, John GH

    2013-02-01

    This report documents a series of tests used to assess the proposed air sampling location in the Hanford Tank Waste Treatment and Immobilization Plant (WTP) Lab C3V (LB-S1) exhaust stack with respect to the applicable criteria regarding the placement of an air sampling probe. Federal regulations require that an air sampling probe be located in the exhaust stack in accordance with the criteria of American National Standards Institute/Health Physics Society (ANSI/HPS) N13.1-1999, Sampling and Monitoring Releases of Airborne Radioactive Substances from the Stack and Ducts of Nuclear Facilities. These criteria address the capability of the sampling probe to extract a sample that represents the effluent stream.

  7. Hanfords Supplemental Treatment Project: Full-Scale Integrated Testing of In-Container-Vitrification and a 10,000-Liter Dryer

    SciTech Connect (OSTI)

    Witwer, Keith S.; Dysland, Eric J.; Garfield, J. S.; Beck, T. H.; Matyas, Josef; Bagaasen, Larry M.; Cooley, Scott K.; Pierce, Eric M.; Kim, Dong-Sang; Schweiger, Michael J.

    2008-02-22

    The GeoMelt In-Container Vitrification (ICV) process was selected by the U.S. Department of Energy (DOE) in 2004 for further evaluation as the supplemental treatment technology for Hanfords low-activity waste (LAW). Also referred to as bulk vitrification, this process combines glass forming minerals, LAW, and chemical amendments; dries the mixture; and then vitrifies the material in a refractory-lined steel container. AMEC Nuclear Ltd. (AMEC) is adapting its GeoMelt ICV technology for this application with technical and analytical support from Pacific Northwest National Laboratory (PNNL). The DVBS project is funded by the DOE Office of River Protection and administered by CH2M HILL Hanford Group, Inc. The Demonstration Bulk Vitrification Project (DBVS) was initiated to engineer, construct, and operate a full-scale bulk vitrification pilot-plant to treat up to 750,000 liters of LAW from Waste Tank 241-S-109 at the DOE Hanford Site. Since the beginning of the DBVS project in 2004, testing has used laboratory, crucible-scale, and engineering-scale equipment to help establish process limitations of selected glass formulations and identify operational issues. Full-scale testing has provided critical design verification of the ICV process before operating the Hanford pilot-plant. In 2007, the projects fifth full-scale test, called FS-38D, (also known as the Integrated Dryer Melter Test, or IDMT,) was performed. This test had three primary objectives: 1) Demonstrate the simultaneous and integrated operation of the ICV melter with a 10,000-liter dryer, 2) Demonstrate the effectiveness of a new feed reformulation and change in process methodology towards reducing the production and migration of molten ionic salts (MIS), and, 3) Demonstrate that an acceptable glass product is produced under these conditions. Testing was performed from August 8 to 17, 2007. Process and analytical results demonstrated that the primary test objectives, along with a dozen supporting objectives, were successfully met. Glass performance exceeded all disposal performance criteria. A previous issue with MIS containment was successfully resolved in FS-38D, and the ICV melter was integrated with a full-scale, 10,000-liter dryer. This paper describes the rationale for performing the test, the purpose and outcome of scale-up tests preceding it, and the performance and outcome of FS-38D.

  8. Hanford's Supplemental Treatment Project: Full-Scale Integrated Testing of In-Container-Vitrification and a 10,000-Liter Dryer

    SciTech Connect (OSTI)

    Witwer, K.S.; Dysland, E.J.; Garfield, J.S.; Beck, T.H.; Matyas, J.; Bagaasen, L.M.; Cooley, S.K.; Pierce, E.; Kim, D.S.; Schweiger, M.J.

    2008-07-01

    The GeoMelt{sup R} In-Container Vitrification{sup TM} (ICV{sup TM}) process was selected by the U.S. Department of Energy (DOE) in 2004 for further evaluation as the supplemental treatment technology for Hanford's low-activity waste (LAW). Also referred to as 'bulk vitrification', this process combines glass forming minerals, LAW, and chemical amendments; dries the mixture; and then vitrifies the material in a refractory-lined steel container. AMEC Nuclear Ltd. (AMEC) is adapting its GeoMelt ICV{sup TM} technology for this application with technical and analytical support from Pacific Northwest National Laboratory (PNNL). The DVBS project is funded by the DOE Office of River Protection and administered by CH2M HILL Hanford Group, Inc. The Demonstration Bulk Vitrification Project (DBVS) was initiated to engineer, construct, and operate a full-scale bulk vitrification pilot-plant to treat up to 750,000 liters of LAW from Waste Tank 241-S-109 at the DOE Hanford Site. Since the beginning of the DBVS project in 2004, testing has used laboratory, crucible-scale, and engineering-scale equipment to help establish process limitations of selected glass formulations and identify operational issues. Full-scale testing has provided critical design verification of the ICV{sup TM} process before operating the Hanford pilot-plant. In 2007, the project's fifth full-scale test, called FS-38D, (also known as the Integrated Dryer Melter Test, or IDMT,) was performed. This test had three primary objectives: 1) Demonstrate the simultaneous and integrated operation of the ICV{sup TM} melter with a 10,000- liter dryer, 2) Demonstrate the effectiveness of a new feed reformulation and change in process methodology towards reducing the production and migration of molten ionic salts (MIS), and, 3) Demonstrate that an acceptable glass product is produced under these conditions. Testing was performed from August 8 to 17, 2007. Process and analytical results demonstrated that the primary test objectives, along with a dozen supporting objectives, were successfully met. Glass performance exceeded all disposal performance criteria. A previous issue with MIS containment was successfully resolved in FS-38D, and the ICV{sup TM} melter was integrated with a full-scale, 10,000-liter dryer. This paper describes the rationale for performing the test, the purpose and outcome of scale-up tests preceding it, and the performance and outcome of FS-38D. (authors)

  9. Radiation characterization summary : ACRR 44-inch lead-boron bucket located in the central cavity on the 32-inch pedestal at the core centerline (ACRR-LB44-CC-32-cl).

    SciTech Connect (OSTI)

    Parma, Edward J.,; Quirk, Thomas J.; Lippert, Lance L.; Griffin, Patrick Joseph; Naranjo, Gerald E.; Luker, Spencer Michael

    2013-04-01

    This document presents the facility-recommended characterization of the neutron, prompt gamma-ray, and delayed gamma-ray radiation fields in the Annular Core Research Reactor (ACRR) for the 44-inch-long lead-boron bucket in the central cavity on the 32-inch pedestal at the core centerline. The designation for this environment is ACRR-LB44-CC-32-cl. The neutron, prompt gamma-ray, and delayed gamma-ray energy spectra are presented as well as radial and axial neutron and gamma-ray flux profiles within the experiment area of the bucket. Recommended constants are given to facilitate the conversion of various dosimetry readings into radiation metrics desired by experimenters. Representative pulse and steady-state operations are presented with conversion examples.

  10. Transport Reactor Development Unit Modification to Provide a Syngas Slipstream at Elevated Conditions to Enable Separation of 100 LB/D of Hydrogen by Hydrogen Separation Membranes Year - 6 Activity 1.15 - Development of a National Center for Hydrogen Technology

    SciTech Connect (OSTI)

    Schlasner, Steven

    2012-03-01

    Gasification of coal when associated with carbon dioxide capture and sequestration has the potential to provide low-cost as well as low-carbon hydrogen for electric power, fuels or chemicals production. The key element to the success of this concept is inexpensive, effective separation of hydrogen from carbon dioxide in synthesis gas. Many studies indicate that membrane technology is one of the most, if not the most, economical means of accomplishing separation; however, the advancement of hydrogen separation membrane technology is hampered by the absence of experience or demonstration that the technology is effective economically and environmentally at larger scales. While encouraging performance has been observed at bench scale (less than 12 lb/d hydrogen), it would be imprudent to pursue a largescale demonstration without testing at least one intermediate scale, such as 100 lb/d hydrogen. Among its many gasifiers, the Energy & Environmental Research Center is home to the transport reactor demonstration unit (TRDU), a unit capable of firing 200—500 lb/hr of coal to produce 400 scfm of synthesis gas containing more than 200 lb/d of hydrogen. The TRDU and associated downstream processing equipment has demonstrated the capability of producing a syngas over a wide range of temperatures and contaminant levels — some of which approximate conditions of commercial-scale gasifiers. Until this activity, however, the maximum pressure of the TRDU’ s product syngas was 120 psig, well below the 400+ psig pressures of existing large gasifiers. This activity installed a high-temperature compressor capable of accepting the range of TRDU products up to 450°F and compressing them to 500 psig, a pressure comparable to some large scale gasifiers. Thus, with heating or cooling downstream of the TRDU compressor, the unit is now able to present a near-raw to clean gasifier synthesis gas containing more than 100 lb/d of hydrogen at up to 500 psig over a wide range of temperatures to hydrogen separation membranes or other equipment for development and demonstration.

  11. Melter Pours 10 Millionth Pound of Glass | Department of Energy

    Office of Environmental Management (EM)

    Events Meetings & Events OE provides information on an ongoing basis about meetings and events of interest to people involved in issues related to grid modernization, energy assurance, and electricity policy. Listed below are upcoming events and meetings in chronological order. Information is also available about past events and conferences. PSERC webinar: Physical and Cyber Infrastructure Supporting the Future Grid - May 3, 2016, 2-3 p.m. ET- Summarizing findings from the PSERC/NSF

  12. Effect of ammonia plasma treatment on graphene oxide LB monolayers

    SciTech Connect (OSTI)

    Singh, Gulbagh; Botcha, V. Divakar; Narayanam, Pavan K.; Sutar, D. S.; Talwar, S. S.; Major, S. S.; Srinivasa, R. S.

    2013-02-05

    Graphene oxide monolayer sheets were transferred on Si and SiO{sub 2}/Si substrates by Langmuir-Blodgett technique and were exposed to ammonia plasma at room temperature. The monolayer character of both graphene oxide and plasma treated graphene oxide sheets were ascertained by atomic force microscopy. X-ray photoelectron spectroscopy and Raman spectroscopy revealed that ammonia plasma treatment results in enhancement of graphitic carbon content along with the incorporation of nitrogen. The conductivity of graphene oxide monolayers, which was in the range of 10{sup -6}-10{sup -7} S/cm, increased to 10{sup -2}-10{sup -3} S/cm after the ammonia plasma treatment. These results indicate that the graphene oxide was simultaneously reduced and N-doped during ammonia plasma treatment, without affecting the morphological stability of sheets.

  13. WIPP Safety Is Paramount Top to Bottom, Literally

    Broader source: Energy.gov [DOE]

    CARLSBAD, N.M. – As part of the Waste Isolation Pilot Plant’s (WIPP) preventive maintenance program, four of six head ropes that suspend the waste conveyance were safely replaced recently.

  14. CHIP House Takes Design to Different Heights (Literally)

    Broader source: Energy.gov [DOE]

    Check out the SCI-Arc/Caltech 2011 Solar Decathlon team's house to find out more about their net-zero energy use home -- the CHIP House.

  15. T-686: IBM Tivoli Integrated Portal Java Double Literal Denial...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    this November 2011 IBM Downloads Addthis Related Articles V-145: IBM Tivoli Federated Identity Manager Products Java Multiple Vulnerabilities T-694: IBM Tivoli Federated Identity...

  16. NNSA Livermore Field Office donates over 4,000 pounds of food...

    National Nuclear Security Administration (NNSA)

    food pantries and other local groups in support of the 2015 Feds Feed Families campaign. ... Oct 9, 2015 at 9:00 am Blog archive April 2016 (12) March 2016 (28) February 2016 (21) ...

  17. Idaho Crews Overcome Challenges to Safely Dispose 1-Million-Pound Hot Cell

    Broader source: Energy.gov [DOE]

    American Recovery and Reinvestment Act cleanup crews at the Idaho site recently disposed of a hot cell as heavy as nine fully loaded Boeing 737s.

  18. Review of the NURE Assessment of the U.S. Gulf Coast Uranium Province

    SciTech Connect (OSTI)

    Hall, Susan M.

    2013-09-15

    Historic exploration and development were used to evaluate the reliability of domestic uranium reserves and potential resources estimated by the U.S. Department of Energy national uranium resource evaluation (NURE) program in the U.S. Gulf Coast Uranium Province. NURE estimated 87 million pounds of reserves in the $30/lb U{sub 3}O{sub 8} cost category in the Coast Plain uranium resource region, most in the Gulf Coast Uranium Province. Since NURE, 40 million pounds of reserves have been mined, and 38 million pounds are estimated to remain in place as of 2012, accounting for all but 9 million pounds of U{sub 3}O{sub 8} in the reserve or production categories in the NURE estimate. Considering the complexities and uncertainties of the analysis, this study indicates that the NURE reserve estimates for the province were accurate. An unconditional potential resource of 1.4 billion pounds of U{sub 3}O{sub 8}, 600 million pounds of U{sub 3}O{sub 8} in the forward cost category of $30/lb U{sub 3}O{sub 8} (1980 prices), was estimated in 106 favorable areas by the NURE program in the province. Removing potential resources from the non-productive Houston embayment, and those reserves estimated below historic and current mining depths reduces the unconditional potential resource 33% to about 930 million pounds of U{sub 3}O{sub 8}, and that in the $30/lb cost category 34% to 399 million pounds of U{sub 3}O{sub 8}. Based on production records and reserve estimates tabulated for the region, most of the production since 1980 is likely from the reserves identified by NURE. The potential resource predicted by NURE has not been developed, likely due to a variety of factors related to the low uranium prices that have prevailed since 1980.

  19. DRAFT

    National Nuclear Security Administration (NNSA)

    Tons (short) Acres 0.0040469 Square kilometers Square miles 2.59 Square kilometers Square feet 0.092903 Square meters Tons/acre 0.5999 Kilograms/sq. meter Parts/million 1 a Milligrams/liter Parts/billion 1 a Micrograms/liter Parts/trillion 1 a Micrograms/cu. meter Pounds/cu. ft. 0.016018 Grams/cu. centimeter Pounds/cu. ft. 16,025.6 Grams/cu. meter Inches 2.54 Centimeters Feet 0.3048 Meters Inches 25,400 Micrometers Inches 25.40 Millimeters Miles 1.6093 Kilometers Degrees F - 32 0.55556 Degrees C

  20. Microsoft Word - KCP Final EA Draft 042913 CLEAN for Concurrence-R2.docx

    National Nuclear Security Administration (NNSA)

    Tons (short) Acres 0.0040469 Square kilometers Square miles 2.59 Square kilometers Square feet 0.092903 Square meters Tons/acre 0.5999 Kilograms/sq. meter Parts/million 1 a Milligrams/liter Parts/billion 1 a Micrograms/liter Parts/trillion 1 a Micrograms/cu. meter Pounds/cu. ft. 0.016018 Grams/cu. centimeter Pounds/cu. ft. 16,025.6 Grams/cu. meter Inches 2.54 Centimeters Feet 0.3048 Meters Inches 25,400 Micrometers Inches 25.40 Millimeters Miles 1.6093 Kilometers Degrees F - 32 0.55556 Degrees C

  1. Development of a Hydrogasification Process for Co-Production of Substitute Natural Gas (SNG) and Electric Power from Western Coals

    SciTech Connect (OSTI)

    Sun, Xiaolei; Rink, Nancy

    2011-04-30

    This report presents the results of the research and development conducted on an Advanced Hydrogasification Process (AHP) conceived and developed by Arizona Public Service Company (APS) under U.S. Department of Energy (DOE) contract: DE-FC26-06NT42759 for Substitute Natural Gas (SNG) production from western coal. A double-wall (i.e., a hydrogasification contained within a pressure shell) down-flow hydrogasification reactor was designed, engineered, constructed, commissioned and operated by APS, Phoenix, AZ. The reactor is ASME-certified under Section VIII with a rating of 1150 pounds per square inch gage (psig) maximum allowable working pressure at 1950 degrees Fahrenheit ({degrees}F). The reaction zone had a 1.75 inch inner diameter and 13 feet length. The initial testing of a sub-bituminous coal demonstrated ~ 50% carbon conversion and ~10% methane yield in the product gas under 1625{degrees}F, 1000 psig pressure, with a 11 seconds (s) residence time, and 0.4 hydrogen-to-coal mass ratio. Liquid by-products mainly contained Benzene, Toluene, Xylene (BTX) and tar. Char collected from the bottom of the reactor had 9000-British thermal units per pound (Btu/lb) heating value. A three-dimensional (3D) computational fluid dynamic model simulation of the hydrodynamics around the reactor head was utilized to design the nozzles for injecting the hydrogen into the gasifier to optimize gas-solid mixing to achieve improved carbon conversion. The report also presents the evaluation of using algae for carbon dioxide (CO{sub 2}) management and biofuel production. Nannochloropsis, Selenastrum and Scenedesmus were determined to be the best algae strains for the project purpose and were studied in an outdoor system which included a 6-meter (6M) radius cultivator with a total surface area of 113 square meters (m{sup 2}) and a total culture volume between 10,000 to 15,000 liters (L); a CO{sub 2} on-demand feeding system; an on-line data collection system for temperature, pH, Photosynthetically Activate Radiation (PAR) and dissolved oxygen (DO); and a ~2 gallons per minute (gpm) algae culture dewatering system. Among the three algae strains, Scenedesmus showed the most tolerance to temperature and irradiance conditions in Phoenix and the best self-settling characteristics. Experimental findings and operational strategies determined through these tests guided the operation of the algae cultivation system for the scale-up study. Effect of power plant flue gas, especially heavy metals, on algae growth and biomass adsorption were evaluated as well.

  2. Geek-Up: 350,000 Pounds of Paper, 30,000 Particle Beams and 14 Days in Flight

    Broader source: Energy.gov [DOE]

    Did you know that right now, across the globe, particle beams from some 30,000 accelerators are at work doing everything from diagnosing and treating disease to powering industrial processes?

  3. MOA-2011-BLG-293LB: First microlensing planet possibly in the habitable zone

    SciTech Connect (OSTI)

    Batista, V.; Gould, A.; Yee, J. C.; Gaudi, B. S. [Department of Astronomy, Ohio State University, 140 West 18th Avenue, Columbus, OH 43210 (United States); Beaulieu, J.-P. [Institut d'Astrophysique de Paris, 98 Bis Boulevard Arago, F-75014 Paris (France); Bennett, D. P. [Department of Physics, University of Notre Dame, 225 Nieuwland Science Hall, Notre Dame, IN 46556-5670 (United States); Fukui, A. [Okayama Astrophysical Observatory, National Astronomical Observatory of Japan, Asakuchi, Okayama 719-0232 (Japan); Sumi, T. [Department of Earth and Space Science, Graduate School of Science, Osaka University, Toyonaka, Osaka 560-0043 (Japan); Udalski, A., E-mail: virginie@astronomy.ohio-state.edu, E-mail: gould@astronomy.ohio-state.edu, E-mail: jyee@astronomy.ohio-state.edu, E-mail: beaulieu@iap.fr, E-mail: bennett@nd.edu, E-mail: afukui@oao.nao.ac.jp, E-mail: sumi@ess.sci.osaka-u.ac.jp, E-mail: udalski@astrouw.edu.pl [Warsaw University Observatory, Al. Ujazdowskie 4, 00-478 Warszawa (Poland)

    2014-01-01

    We used Keck adaptive optics observations to identify the first planet discovered by microlensing to lie in or near the habitable zone, i.e., at projected separation r = 1.1 0.1 AU from its M{sub L} = 0.86 0.06 M {sub ?} host, being the highest microlensing mass definitely identified. The planet has a mass m{sub p} = 4.8 0.3 M {sub Jup}, and could in principle have habitable moons. This is also the first planet to be identified as being in the Galactic bulge with good confidence: D{sub L} = 7.72 0.44 kpc. The planet/host masses and distance were previously not known, but only estimated using Bayesian priors based on a Galactic model. These estimates had suggested that the planet might be a super-Jupiter orbiting an M dwarf, a very rare class of planets. We obtained high-resolution JHK images using Keck adaptive optics to detect the lens and so test this hypothesis. We clearly detect light from a G dwarf at the position of the event, and exclude all interpretations other than that this is the lens with high confidence (95%), using a new astrometric technique. The calibrated magnitude of the planet host star is H{sub L} = 19.16 0.13. We infer the following probabilities for the three possible orbital configurations of the gas giant planet: 53% to be in the habitable zone, 35% to be near the habitable zone, and 12% to be beyond the snow line, depending on the atmospherical conditions and the uncertainties on the semimajor axis.

  4. Properties of 30 lb/ft{sup 3} rigid polyurethane foams

    SciTech Connect (OSTI)

    Wenski. E.G.; Stinebaugh, R.E.; York, A.R. II

    1997-03-01

    This report summarizes tests on five different foams. Two are manufactured at Allied Signal, two at North Carolina Foam Industries, and one at General Plastics. The tests conducted are: thermal conductivity at various temperatures, specific heat at 60{degrees}C, compressive strength at ambient and 60{degrees}C, thermogravimetric analysis to 800{degrees}C, intumescence, and char formation properties. A CHN analysis was also performed. Funding for the testing of rigid polyurethane foams originated from the AT-400A container program at Sandia National Laboratories. This testing supported the development of the AT-400A container. The AT-400A is a storage and transportation container that will be used initially at the Pantex Plant for storage of plutonium from dismantled nuclear weapons.

  5. MOA-2010-BLG-328Lb: A sub-Neptune orbiting very late M dwarf?

    SciTech Connect (OSTI)

    Furusawa, K.; Abe, F.; Itow, Y.; Masuda, K.; Matsubara, Y.; Udalski, A.; Sumi, T.; Bennett, D. P.; Bond, I. A.; Ling, C. H.; Gould, A.; Jørgensen, U. G.; Snodgrass, C.; Prester, D. Dominis; Albrow, M. D.; Botzler, C. S.; Freeman, M.; Chote, P.; Harris, P.; Fukui, A. E-mail: liweih@astro.ucla.edu E-mail: rzellem@lpl.arizona.edu; Collaboration: MOA Collaboration; OGLE Collaboration; μFUN Collaboration; MiNDSTEp Consortium; RoboNet Collaboration; PLANET Collaboration; and others

    2013-12-20

    We analyze the planetary microlensing event MOA-2010-BLG-328. The best fit yields host and planetary masses of M {sub h} = 0.11 ± 0.01 M {sub ☉} and M {sub p} = 9.2 ± 2.2 M {sub ⊕}, corresponding to a very late M dwarf and sub-Neptune-mass planet, respectively. The system lies at D {sub L} = 0.81 ± 0.10 kpc with projected separation r = 0.92 ± 0.16 AU. Because of the host's a priori unlikely close distance, as well as the unusual nature of the system, we consider the possibility that the microlens parallax signal, which determines the host mass and distance, is actually due to xallarap (source orbital motion) that is being misinterpreted as parallax. We show a result that favors the parallax solution, even given its close host distance. We show that future high-resolution astrometric measurements could decisively resolve the remaining ambiguity of these solutions.

  6. Microsoft Word - M2FT-14LB0811011_International Collab Activities...

    Office of Environmental Management (EM)

    ... JNEAP (Joint U.S.-Japan Nuclear Energy Action Plan) ... disposal and a long history of work in an underground ... Comparison with experimental data contributed to testing and ...

  7. Microsoft Word - M2FT-14LB0811011_International Collab Activities_Sep 2014

    Office of Environmental Management (EM)

    International Collaboration Activities in Different Geologic Disposal Environments Prepared for U.S. Department of Energy Used Fuel Disposition Jens Birkholzer Lawrence Berkeley National Laboratory September, 2014 FCRD-UFD-2014-000065 LBNL-6782E DISCLAIMER This information was prepared as an account of work sponsored by an agency of the U.S. Government. While this document is believed to contain correct information, Neither the U.S. Government nor any agency thereof, nor the Regents of the

  8. EXPERIMENTAL RESULTS FOR THE ISOTOPIC EXCHANGE OF A 1600 LITER TITANIUM HYDRIDE STORAGE VESSEL

    SciTech Connect (OSTI)

    Klein, J.

    2010-12-14

    Titanium is used as a low pressure tritium storage material. The absorption/desorption rates and temperature rise during air passivation have been reported previously for a 4400 gram prototype titanium hydride storage vessel (HSV). A desorption limit of roughly 0.25 Q/M was obtained when heating to 700 C which represents a significant residual tritium process vessel inventory. To prepare an HSV for disposal, batchwise isotopic exchange has been proposed to reduce the tritium content to acceptable levels. A prototype HSV was loaded with deuterium and exchanged with protium to determine the effectiveness of a batch-wise isotopic exchange process. A total of seven exchange cycles were performed. Gas samples were taken nominally at the beginning, middle, and end of each desorption cycle. Sample analyses showed the isotopic exchange process does not follow the standard dilution model commonly reported. Samples taken at the start of the desorption process were lower in deuterium (the gas to be removed) than those taken later in the desorption cycle. The results are explained in terms of incomplete mixing of the exchange gas in the low pressure hydride.

  9. Webcast of the Energy Literate Citizenry from K-to-Gray

    Broader source: Energy.gov [DOE]

    The Energy Literacy Framework webinar was held on February 6, 2013 at 4 pm EST. It focused on outlining the Energy Literacy Framework, which identifies concepts every citizen should know to be...

  10. Text-Alternative Webcast of the Energy Literate Citizenry from K-to-Gray

    Broader source: Energy.gov [DOE]

    Michelle Fox: Hi, good afternoon everyone and welcome to today's webinar on energy literacy. Thank you for joining. I want to thank also the Department of Education for their Green Strides Webinar...

  11. Development of Urea Dosing System for 10 Liter Heavy Duty Diesel...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    with Urea-SCR System Deactivation Mechanisms of Base MetalZeolite Urea Selective Catalytic Reduction Materials, and Development of Zeolite-Based Hydrocarbon Adsorber Materials

  12. The turbocharged and intercooled 2. 3 liter engine for the Volvo 760

    SciTech Connect (OSTI)

    Andersson, J.; Bengtsson, A.; Eriksson, S.

    1984-01-01

    In 1981 Volvo launched the 2.1l turbocharged engine for the 240 model. Since then, the market interest for turbocharged engines has increased rapidly and along with this the demand for more efficient engines. The use of intercooler and micro-computer controlled fuel- and ignition systems in passenger car applications made it possible to develop a second generation of turbocharged engines with the capability to meet these demands. This paper describes the 2.3l turbocharged engine and its development for the US-version of the 1984 760 model.

  13. Development of Urea Dosing System for 10 Liter Heavy Duty Diesel Engine

    Broader source: Energy.gov (indexed) [DOE]

    | Department of Energy These slides were presented at the 2010 New Fuel Cell Projects Meeting on September 28, 2010. PDF icon 7_usc_popov.pdf More Documents & Publications DOE's Fuel Cell Catalyst R&D Activities 2006 Alkaline Membrane Fuel Cell Workshop Final Report Highly Dispersed Alloy Cathode Catalyst for Durability Powered Vehicle | Department of Energy

    Poster presented at the 16th Directions in Engine-Efficiency and Emissions Research (DEER) Conference in Detroit, MI,

  14. MOA-2008-BLG-379Lb: A massive planet from a high magnification event with a faint source

    SciTech Connect (OSTI)

    Suzuki, D.; Sumi, T.; Fukagawa, M.; Shibai, H.; Udalski, A.; Bennett, D. P.; Bond, I. A.; Ling, C. H.; Abe, F.; Furusawa, K.; Itow, Y.; Masuda, K.; Matsubara, Y.; Botzler, C. S.; Freeman, M.; Rattenbury, N.; Fukui, A.; Muraki, Y.; Ohnishi, K.; Saito, To.; Collaboration: MOA Collaboration; OGLE Collaboration; and others

    2014-01-10

    We report on the analysis of the high microlensing event MOA-2008-BLG-379, which has a strong microlensing anomaly at its peak due to a massive planet with a mass ratio of q = 6.9 × 10{sup –3}. Because the faint source star crosses the large resonant caustic, the planetary signal dominates the light curve. This is unusual for planetary microlensing events, and as a result, the planetary nature of this light curve was not immediately noticed. The planetary nature of the event was found when the Microlensing Observations in Astrophysics (MOA) Collaboration conducted a systematic study of binary microlensing events previously identified by the MOA alert system. We have conducted a Bayesian analysis based on a standard Galactic model to estimate the physical parameters of the lens system. This yields a host star mass of M{sub L}=3.3{sub −1.2}{sup +1.7} M{sub ⊙} orbited by a planet of mass m{sub P}=0.56{sub −0.27}{sup +0.24} M{sub Jup} at an orbital separation of a=3.3{sub −1.2}{sup +1.3} AU at a distance of D{sub L}=4.1{sub −1.9}{sup +1.7} kpc. The faint source magnitude of I {sub S} = 21.30 and relatively high lens-source relative proper motion of μ{sub rel} = 7.6 ± 1.6 mas yr{sup –1} imply that high angular resolution adaptive optics or Hubble Space Telescope observations are likely to be able to detect the source star, which would determine the masses and distance of the planet and its host star.

  15. Super-massive planets around late-type starsthe case of OGLE-2012-BLG-0406Lb

    SciTech Connect (OSTI)

    Poleski, Rados?aw; Gould, Andrew; Udalski, Andrzej; Szyma?ski, Micha? K.; Soszy?ski, Igor; Kubiak, Marcin; Pietrzy?ski, Grzegorz; Koz?owski, Szymon; Pietrukowicz, Pawe?; Ulaczyk, Krzysztof; Skowron, Jan; Wyrzykowski, ?ukasz; Dong, Subo

    2014-02-10

    Super-Jupiter-mass planets should form only beyond the snow line of host stars. However, the core accretion theory of planetary formation does not predict super-Jupiters forming around low-mass hosts. We present a discovery of a 3.9 1.2 M {sub Jup} mass planet orbiting the 0.59 0.17 M {sub ?} star using the gravitational microlensing method. During the event, the projected separation of the planet and the star is 3.9 1.0 AU, i.e., the planet is significantly further from the host star than the snow line. This is the fourth such planet discovered using the microlensing technique and challenges the core accretion theory.

  16. Improved Limits on Spin-Dependent WIMP-Proton Interactions from a Two Liter CF$_3$I Bubble Chamber

    SciTech Connect (OSTI)

    Behnke, E.; Behnke, J.; Brice, S.J.; Broemmelsiek, D.; Collar, J.I.; Cooper, P.S.; Crisler, M.; Dahl, C.E.; Fustin, D.; Hall, J.; Hinnefeld, J.H.; /Indiana U., South Bend /Fermilab /Indiana U., South Bend /Fermilab /Indiana U., South Bend /Fermilab

    2010-08-01

    Data from the operation of a bubble chamber filled with 3.5 kg of CF{sub 3}I in a shallow underground site are reported. An analysis of ultrasound signals accompanying bubble nucleations confirms that alpha decays generate a significantly louder acoustic emission than single nuclear recoils, leading to an efficient background discrimination. Three dark matter candidate events were observed during an effective exposure of 28.1 kg-day, consistent with a neutron background. This observation provides the strongest direct detection constraint to date on WIMP-proton spin-dependent scattering for WIMP masses > 20 GeV/c{sup 2}.

  17. A Summary of Tritium In-Bed Accountability for 1500 Liter La-Ni-Al Storage Beds

    SciTech Connect (OSTI)

    Klein, J.E.

    2001-07-31

    This paper summarizes the in-bed accountability (IBA) calibration results for all the RF LaNi4.25Al0.75 tritium storage beds.

  18. Electro-osmotic transport in wet processing of textiles

    DOE Patents [OSTI]

    Cooper, John F.

    1998-01-01

    Electro-osmotic (or electrokinetic) transport is used to efficiently force a solution (or water) through the interior of the fibers or yarns of textile materials for wet processing of textiles. The textile material is passed between electrodes that apply an electric field across the fabric. Used alone or in parallel with conventional hydraulic washing (forced convection), electro-osmotic transport greatly reduces the amount of water used in wet processing. The amount of water required to achieve a fixed level of rinsing of tint can be reduced, for example, to 1-5 lbs water per pound of fabric from an industry benchmark of 20 lbs water/lb fabric.

  19. Electro-osmotic transport in wet processing of textiles

    DOE Patents [OSTI]

    Cooper, J.F.

    1998-09-22

    Electro-osmotic (or electrokinetic) transport is used to efficiently force a solution (or water) through the interior of the fibers or yarns of textile materials for wet processing of textiles. The textile material is passed between electrodes that apply an electric field across the fabric. Used alone or in parallel with conventional hydraulic washing (forced convection), electro-osmotic transport greatly reduces the amount of water used in wet processing. The amount of water required to achieve a fixed level of rinsing of tint can be reduced, for example, to 1--5 lbs water per pound of fabric from an industry benchmark of 20 lbs water/lb fabric. 5 figs.

  20. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Fuels Tax Alternative fuels subject to the New Mexico excise tax include liquefied petroleum gas (propane), compressed natural gas (CNG), and liquefied natural gas (LNG). The excise tax imposed on propane is $0.12 per gallon, and the excise tax imposed on CNG and LNG is $0.133 and $0.206 per gallon, respectively. A gallon is measured as 3.785 liters of propane, 5.66 pounds (lbs.) of CNG, and 6.06 lbs. of LNG. Alternative fuel purchased for distribution is not subject to the excise tax at the

  1. THE SECOND MULTIPLE-PLANET SYSTEM DISCOVERED BY MICROLENSING: OGLE-2012-BLG-0026Lb, c-A PAIR OF JOVIAN PLANETS BEYOND THE SNOW LINE

    SciTech Connect (OSTI)

    Han, C.; Choi, J.-Y. [Department of Physics, Institute for Astrophysics, Chungbuk National University, Cheongju 371-763 (Korea, Republic of); Udalski, A.; Szymanski, M. K.; Kubiak, M.; Soszynski, I.; Pietrzynski, G.; Poleski, R.; Ulaczyk, K.; Pietrukowicz, P.; Kozlowski, S.; Wyrzykowski, L. [Warsaw University Observatory, Al. Ujazdowskie 4, 00-478 Warszawa (Poland); Yee, J. C.; Gould, A.; Skowron, J.; Batista, V. [Department of Astronomy, Ohio State University, 140 West 18th Avenue, Columbus, OH 43210 (United States); Christie, G. [Auckland Observatory, Auckland (New Zealand); Tan, T.-G. [Perth Exoplanet Survey Telescope, Perth (Australia); Almeida, L. A. [Instituto Nacional de Pesquisas Espaciais, Sao Jose dos Campos, SP (Brazil); Depoy, D. L. [Department of Physics, Texas A and M University, College Station, TX (United States); Collaboration: OGLE Collaboration; muFUN Collaboration; and others

    2013-01-10

    We report the discovery of a planetary system from observation of the high-magnification microlensing event OGLE-2012-BLG-0026. The lensing light curve exhibits a complex central perturbation with multiple features. We find that the perturbation was produced by two planets located near the Einstein ring of the planet host star. We identify four possible solutions resulting from the well-known close/wide degeneracy. By measuring both the lens parallax and the Einstein radius, we estimate the physical parameters of the planetary system. According to the best-fit model, the two planet masses are {approx}0.11 M{sub J} and 0.68 M{sub J} and they are orbiting a G-type main-sequence star with a mass {approx}0.82 M{sub Sun }. The projected separations of the individual planets are beyond the snow line in all four solutions, being {approx}3.8 AU and 4.6 AU in the best-fit solution. The deprojected separations are both individually larger and possibly reversed in order. This is the second multi-planet system with both planets beyond the snow line discovered by microlensing. This is the only such system (other than the solar system) with measured planet masses without sin i degeneracy. The planetary system is located at a distance 4.1 kpc from the Earth toward the Galactic center. It is very likely that extra light from stars other than the lensed star comes from the lens itself. If this is correct, it will be possible to obtain detailed information about the planet host star from follow-up observation.

  2. MOA-2011-BLG-262Lb: A sub-Earth-mass moon orbiting a gas giant primary or a high velocity planetary system in the galactic Bulge

    SciTech Connect (OSTI)

    Bennett, D. P.; Batista, V.; Bond, I. A.; Ling, C. H.; Bennett, C. S.; Suzuki, D.; Koshimoto, N.; Beaulieu, J.-P.; Udalski, A.; Donatowicz, J.; Bozza, V.; Abe, F.; Fukunaga, D.; Itow, Y.; Masuda, K.; Matsubara, Y.; Muraki, Y.; Botzler, C. S.; Freeman, M.; Fukui, A.; Collaboration: MOA Collaboration; PLANET Collaboration; μFUN Collaboration; OGLE Collaboration; RoboNet Collaboration; and others

    2014-04-20

    We present the first microlensing candidate for a free-floating exoplanet-exomoon system, MOA-2011-BLG-262, with a primary lens mass of M {sub host} ∼ 4 Jupiter masses hosting a sub-Earth mass moon. The argument for an exomoon hinges on the system being relatively close to the Sun. The data constrain the product M{sub L} π{sub rel} where M{sub L} is the lens system mass and π{sub rel} is the lens-source relative parallax. If the lens system is nearby (large π{sub rel}), then M{sub L} is small (a few Jupiter masses) and the companion is a sub-Earth-mass exomoon. The best-fit solution has a large lens-source relative proper motion, μ{sub rel} = 19.6 ± 1.6 mas yr{sup –1}, which would rule out a distant lens system unless the source star has an unusually high proper motion. However, data from the OGLE collaboration nearly rule out a high source proper motion, so the exoplanet+exomoon model is the favored interpretation for the best fit model. However, there is an alternate solution that has a lower proper motion and fits the data almost as well. This solution is compatible with a distant (so stellar) host. A Bayesian analysis does not favor the exoplanet+exomoon interpretation, so Occam's razor favors a lens system in the bulge with host and companion masses of M{sub host}=0.12{sub −0.06}{sup +0.19} M{sub ⊙} and m{sub comp}=18{sub −10}{sup +28} M{sub ⊕}, at a projected separation of a{sub ⊥}=0.84{sub −0.14}{sup +0.25} AU. The existence of this degeneracy is an unlucky accident, so current microlensing experiments are in principle sensitive to exomoons. In some circumstances, it will be possible to definitively establish the mass of such lens systems through the microlensing parallax effect. Future experiments will be sensitive to less extreme exomoons.

  3. MOA 2010-BLG-477Lb: CONSTRAINING THE MASS OF A MICROLENSING PLANET FROM MICROLENSING PARALLAX, ORBITAL MOTION, AND DETECTION OF BLENDED LIGHT

    SciTech Connect (OSTI)

    Bachelet, E.; Fouque, P.; Shin, I.-G.; Han, C.; Gould, A.; Dong, Subo; Marshall, J.; Skowron, J.; Menzies, J. W.; Beaulieu, J.-P.; Marquette, J.-B.; Bennett, D. P.; Bond, I. A.; Heyrovsky, D.; Street, R. A.; Sumi, T.; Udalski, A.; Abe, L.; Agabi, K.; Albrow, M. D.; Collaboration: PLANET Collaboration; FUN muCollaboration; MOA Collaboration; OGLE Collaboration; RoboNet Collaboration; MiNDSTEp Consortium; and others

    2012-07-20

    Microlensing detections of cool planets are important for the construction of an unbiased sample to estimate the frequency of planets beyond the snow line, which is where giant planets are thought to form according to the core accretion theory of planet formation. In this paper, we report the discovery of a giant planet detected from the analysis of the light curve of a high-magnification microlensing event MOA 2010-BLG-477. The measured planet-star mass ratio is q = (2.181 {+-} 0.004) Multiplication-Sign 10{sup -3} and the projected separation is s = 1.1228 {+-} 0.0006 in units of the Einstein radius. The angular Einstein radius is unusually large {theta}{sub E} = 1.38 {+-} 0.11 mas. Combining this measurement with constraints on the 'microlens parallax' and the lens flux, we can only limit the host mass to the range 0.13 < M/M{sub Sun} < 1.0. In this particular case, the strong degeneracy between microlensing parallax and planet orbital motion prevents us from measuring more accurate host and planet masses. However, we find that adding Bayesian priors from two effects (Galactic model and Keplerian orbit) each independently favors the upper end of this mass range, yielding star and planet masses of M{sub *} = 0.67{sup +0.33}{sub -0.13} M{sub Sun} and m{sub p} = 1.5{sup +0.8}{sub -0.3} M{sub JUP} at a distance of D = 2.3 {+-} 0.6 kpc, and with a semi-major axis of a = 2{sup +3}{sub -1} AU. Finally, we show that the lens mass can be determined from future high-resolution near-IR adaptive optics observations independently from two effects, photometric and astrometric.

  4. Webcast of the Energy Literate Citizenry from K-to-Gray: A Webcast on the Department of Energy's Energy Literacy Initiative

    Broader source: Energy.gov [DOE]

    The Energy Literacy Framework webinar was held on February 6, 2013 at 4 pm EST. The presentation, webcast and resources are available below.

  5. Improved Limits on Spin-Dependent WIMP-Proton Interactions from a Two Liter CF{sub 3}I Bubble Chamber

    SciTech Connect (OSTI)

    Behnke, E.; Behnke, J.; Hinnefeld, J. H.; Levine, I.; Shepherd, T.; Brice, S. J.; Broemmelsiek, D.; Cooper, P. S.; Crisler, M.; Hall, J.; Hu, M.; Ramberg, E.; Sonnenschein, A.; Collar, J. I.; Dahl, C. E.; Fustin, D.; Szydagis, M.

    2011-01-14

    Data from the operation of a bubble chamber filled with 3.5 kg of CF{sub 3}I in a shallow underground site are reported. An analysis of ultrasound signals accompanying bubble nucleations confirms that alpha decays generate a significantly louder acoustic emission than single nuclear recoils, leading to an efficient background discrimination. Three dark matter candidate events were observed during an effective exposure of 28.1 kg day, consistent with a neutron background. This observation provides strong direct detection constraints on weakly interacting massive particle (WIMP)-proton spin-dependent scattering for WIMP masses >20 GeV/c{sup 2}.

  6. Final evaluation report for Westinghouse Hanford Company, WRAP-1,208 liter waste drum, docket 94-35-7A, type A packaging

    SciTech Connect (OSTI)

    Kelly, D.L., Westinghouse Hanford

    1996-06-12

    This report documents the U.S. Department of Transportation Specification 7A Type A (DOT-7A) compliance test results of the Westinghouse Hanford Company, Waste Receiving and Processing Facility, Module 1 (WRAP-1) Drum. The WRAP-1 Drum was tested for DOE-HQ in August 1994, by Los Alamos National Laboratory, under docket number 94-35-7A. Additionally, comparison and evaluation of the approved, as-tested packaging configuration was performed by WHC in September 1995. The WRAP-1 Drum was evaluated against the performance of the DOT-17C, 208 1 (55-gal) steel drums tested and evaluated under dockets 89-13-7A/90-18-7A and 94-37-7A.

  7. Titanha Alloy Wwfacturbi: L'ivinien Hatioml Lead Camparw Box C, Widgr, Station

    Office of Legacy Management (LM)

    !A r/ 1.$ smcz; XaPERxAL WCMSE Llcm No. c- 3u3 xmAtdr cktebor 24, lp55 Titanha Alloy Wwfacturbi: L'ivinien Hatioml Lead Camparw Box C, Widgr, Station Uagara F&lb, New York Attention; &. steprmn F, Ijrbw ~~~-suont to ti;o Atdc Lzmrgy &t of 1954 mzd heson 40.21 of the Code ai Federal hegulatio.w, Title II) - Atodc burg)r, Crypta' 1, k' t h0 - Contro;l of fource Pleterial, you are bareby liuanrmd to masire pomessioa of Md tit163 to ten (Lo) pound8 of thorfu m%ta.l rcr u80 in

  8. Maintenance is the cheapest way to improve fine coal dewatering

    SciTech Connect (OSTI)

    Burger, J.

    1986-01-01

    There are a great many things that a preparation plant operator can do right now to increase fine coal dewatering effectiveness and maintenance is one of them, says Donald A. Dahlstrom, at the University of Utah. Dewatering of fine coal is increasingly important, because electricity generation, the largest coal consumer, is so strongly affected by the moisture content. Every pound of water put into a boiler raises costs about 2 1/2 cents. The heat it takes to turn water to steam and get it out the stack is heat that could have been used to generate power. In addition, there is the cost of shipping the water. You can add the freight costs to that. In contrast it costs about 1/2-cent/lb to remove the water at the preparation plant.

  9. Map of the State Recognition of the Auxiliary Power Weight Exemption...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    400-lb exemption by enforcement policy rather than by law and has legislation in process to allow the 400-lb exemption by law Allows the 400-lb exemption by law and a 550-lb ...

  10. Pellet property requirements for future blast-furnace operations and other new ironmaking processes

    SciTech Connect (OSTI)

    Agrawal, A.K.; Oshnock, T.W.

    1995-12-01

    The requirements for the physical, chemical and metallurgical properties of pellets have continued to become more stringent as blast-furnace productivity and coke rate have been rapidly improved during the last decade. In addition, the age and deterioration of the North American coke batteries, the lack of capital to sufficiently rebuild them, and the threat of increasingly more stringent environmental controls for the coke batteries has forced North American ironmakers to begin implementing pulverized coal injection to minimize the coke requirements for the blast furnace and to seriously investigate developing other ironmaking processes that use coal instead of coke. Therefore, the next major step in North American ironmaking has included injecting pulverized coal (PC) at 200 kilograms per ton of hot metal (kg/ton) [400 pounds per net ton of hot metal (lb/NTHM)] or greater which will result in the coke rate decreasing to less than 300 kg/ton (600 lb/NTHM) or less. As a result, the pellets will spend more time in the furnace and will be required to support more total weight. Pellets can also be a major iron unit source for other cokeless ironmaking processes such as the COREX process or the AISI direct ironmaking process. This paper will explore the pellet property requirements for future blast-furnace operations and cokeless ironmaking processes.

  11. BrinkmanFinal_Testimony(8).pdf

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    b. DOE (Detection) 1,520 liters 9 c. DOE (Emergency Response) 1,750 liters d. DOE (NIFNNSA) 80 liters e. DOE-Science 341 liters f. NIST 832 liters g. Oil and Gas 1,000...

  12. Development of the Cummins L10 engine to operate on natural gas for heavy duty transit bus applications. Final report, August 1988-December 1991

    SciTech Connect (OSTI)

    Welliver, D.R.

    1993-07-01

    This report covers all of the activities of a program undertaken to develop a natural gas fueled engine using the Cummins L10 diesel engine as the base engine. The base diesel engine is a 10 liter turbocharged jacket water aftercooled carcass that develops 270 hp at 2100 rpm. The design goals included developing a natural gas version at 240 hp with 750 lb-ft of peak torque with exhaust emission level demonstration meeting the 1991 EPA Urban Bus Emission Mandate. Additional goals included demonstrating diesel like vehicle performance and diesel like reliability and durability. Two fuel delivery systems were evaluated, one mechanical and the other electronic closed loop. Field and laboratory test engines were utilized to document reliability. Results of this program led to the production release of the gas engine for transit bus applications and California Air Resources Board certification during 1992.

  13. High pressure HC1 conversion of cellulose to glucose

    SciTech Connect (OSTI)

    Antonoplis, Robert Alexander; Blanch, Harvey W.; Wilke, Charles R.

    1981-08-01

    The production of ethanol from glucose by means of fermentation represents a potential long-range alternative to oil for use as a transportation fuel. Today's rising oil prices and the dwindling world supply of oil have made other fuels, such as ethanol, attractive alternatives. It has been shown that automobiles can operate, with minor alterations, on a 10% ethanol-gasoline mixture popularly known as gasohol. Wood has long been known as a potential source of glucose. Glucose may be obtained from wood following acid hydrolysis. In this research, it was found that saturating wood particles with HCl gas under pressure was an effective pretreatment before subjecting the wood to dilute acid hydrolysis. The pretreatment is necessary because of the tight lattice structure of cellulose, which inhibits dilute acid hydrolysis. HCl gas makes the cellulose more susceptible to hydrolysis and the glucose yield is doubled when dilute acid hydrolysis is preceded by HCl saturation at high pressure. The saturation was most effectively performed in a fluidized bed reactor, with pure HCl gas fluidizing equal volumes of ground wood and inert particles. The fluidized bed effectively dissipated the large amount of heat released upon HCl absorption into the wood. Batch reaction times of one hour at 314.7 p.s.i.a. gave glucose yields of 80% and xylose yields of 95% after dilute acid hydrolysis. A non-catalytic gas-solid reaction model, with gas diffusing through the solid limiting the reaction rate, was found to describe the HCl-wood reaction in the fluidized bed. HCl was found to form a stable adduct with the lignin residue in the wood, in a ratio of 3.33 moles per mole of lignin monomer. This resulted in a loss of 0.1453 lb. of HCl per pound of wood. The adduct was broken upon the addition of water. A process design and economic evaluation for a plant to produce 214 tons per day of glucose from air-dried ground Populus tristi gave an estimated glucose cost of 15.14 cents per pound. This would correspond to $2.54 per gallon of ethanol if the glucose were fermented. Key factors contributing to the cost of glucose production were unrecovered HCl, which contributed 5.70 cents per pound of glucose, and the cost of wood, which at $25 per ton contribute 4.17 cents per pound.

  14. U.S. Uranium Reserves Estimates

    Gasoline and Diesel Fuel Update (EIA)

    2. U.S. Forward-Cost Uranium Reserves by Mining Method, Year-End 2008 Mining Method 50 per pound 100 per pound Ore (million tons) Gradea (percent U3O8) U3O8 (million pounds) Ore...

  15. N.J. DEP recognizes PPPL as state's top environmental steward...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    grounds to celebrate Earth Week last month. Some 32 volunteers collected 350 pounds of trash and 35 pounds of leaves for composting. PPPL's composting and recycling efforts...

  16. Growing the Future Bioeconomy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    multiple molecules Operating at industrial manufacturing scale Differentiated ... Strain Engineering 0.5 & 2 Liter Fermentation 300 Liter Fermentation & Recovery ...

  17. The impact of summer heat islands on cooling energy consumption and CO{sub 2} emissions

    SciTech Connect (OSTI)

    Akbari, H.; Huang, J.; Martien, P.; Rainer, L.; Rosenfeld, A.; Taha, H.

    1988-08-01

    It has been well documented that summer heat islands increase the demand for air conditioning. Several studies have suggested developing guidelines to mitigate this negative effect, on both micro- and meso-scales. Reducing summer heat islands saves cooling energy, reduces peak demand, and reduces the emission of CO{sub 2} from electric power plants. This paper summarizes some of the efforts to quantify the effects of techniques to reduce heat islands. In particular, the authors summarize simulations they have made on the effects of plating trees and switching to light colored surfaces in cities. The results indicate that these techniques effectively reduce building cooling loads and peak power in selected US cities, and are the cheapest way to save energy and reduce CO{sub 2} emissions. This paper compares the economics of technologies to mitigate summer heat islands with other types of conservation measures. The authors estimate the cost of energy conserved by planting trees and recoating surfaces on a national level and compare it with the cost of energy conserved by increasing efficiencies in electrical appliances and cars. Early results indicate that the cost of energy saved by controlling heat islands is less than 1{cents}/kWh, more attractive than efficient electric appliances ({approximately} 2{cents}/kWh), and far more attractive than new electric supplies ({approximately}10{cents}/kWh). In transportation, the cost of conserving a gallon of gasoline, though far more attractive than buying gasoline at current prices, is again more expensive than controlling heat islands. By accounting for the carbon content of the fuels used for power generation and transportation, the authors restate these comparisons in terms of cents per avoided pound of carbon emitted as CO{sub 2}. The results show that the cost of avoided CO{sub 2} from planting trees/increasing albedo is about 0.3--1.3{cents}/lb. of carbon; for buying efficient electric appliances, 2.5{cents}/lb. of carbon; and for efficient cars, 10{cents}/lb. of carbon.

  18. U. S. monthly coal production

    Gasoline and Diesel Fuel Update (EIA)

    3. U.S. Uranium Reserves by Forward-Cost Category, Year-End 1993-2008 (Million Pounds U3O8) Year Forward-cost Category Up to 30 per pound Up to 50 per pound Up to 100 per pound...

  19. 2015 Domestic Uranium Production Report

    U.S. Energy Information Administration (EIA) Indexed Site

    Domestic Uranium Production Report 2015 Domestic Uranium Production Report Release Date: May 5, 2016 Next Release Date: May 2017 million pounds U 3 O 8 $0 to $30 per pound $0 to $50 per pound $0 to $100 per pound $0 to $30 per pound $0 to $50 per pound $0 to $100 per pound Properties with Exploration Completed, Exploration Continuing, and Only Assessment Work W W 154.6 24.3 W 151.6 Properties Under Development for Production and Development Drilling W 38.2 W W 38.2 W Mines in Production W 19.2 W

  20. 2015 Domestic Uranium Production Report

    U.S. Energy Information Administration (EIA) Indexed Site

    10. Uranium reserve estimates at the end of 2014 and 2015" "million pounds U3O8" ,"End of 2014",,,"End of 2015" "Uranium Reserve Estimates1 by Mine and Property Status, Mining Method, and State(s)","Forward Cost 2" ,"$0 to $30 per pound","$0 to $50 per pound","$0 to $100 per pound","$0 to $30 per pound","$0 to $50 per pound","$0 to $100 per pound" "Properties with Exploration

  1. Blast-furnace ironmaking -- Existing capital and continued improvements are a winning formula for a bright future

    SciTech Connect (OSTI)

    Oshnock, T.W.; Colinear, J.A.

    1995-12-01

    Throughout the years the blast-furnace process has been improved upon significantly. Increases to the hot-blast temperature, improvements to the physical, chemical, and metallurgical properties of coke and burden materials, the use of more fuel injectants, and improvements to the design of the furnace facilities have led to significant decreases in furnace coke rate, increases in productivity, and increases in furnace campaign life. As a result, many of the alternative cokeless reduction processes have not replaced blast-furnace hot-metal production in North America. In the future, these continued blast-furnace improvements will potentially result in coke rates decreasing to 400 pounds per net ton of hot metal (lb/NTHM) as more pulverized coal is injected. These improvements, coupled with the fact that existing blast furnaces and coke plants can be refurbished for approximately $110 per annual ton of hot metal [$100 per annual net ton of hot metal (NTHM)], will result in extending the life of the North American blast furnaces well into the twenty-first century.

  2. Steam reforming of low-level mixed waste. Final report

    SciTech Connect (OSTI)

    1998-06-01

    ThermoChem has successfully designed, fabricated and operated a nominal 90 pound per hour Process Development Unit (PDU) on various low-level mixed waste surrogates. The design, construction, and testing of the PDU as well as performance and economic projections for a 300-lb/hr demonstration and commercial system are described. The overall system offers an environmentally safe, non-incinerating, cost-effective, and publicly acceptable method of processing LLMW. The steam-reforming technology was ranked the No. 1 non-incineration technology for destruction of hazardous organic wastes in a study commissioned by the Mixed Waste Focus Area and published in April 1997. The ThermoChem steam-reforming system has been developed over the last 13 years culminating in this successful test campaign on LLMW surrogates. Six surrogates were successfully tested including a 750-hour test on material simulating a PCB- and Uranium-contaminated solid waste found at the Portsmouth Gaseous Diffusion Plant. The test results indicated essentially total (> 99.9999%) destruction of RCRA and TSCA hazardous halogenated organics, significant levels of volume reduction (> 400 to 1), and retention of radionuclides in the volume-reduced solids. Economic evaluations have shown the steam-reforming system to be very cost competitive with more conventional and other emerging technologies.

  3. Steam Reforming of Low-Level Mixed Waste

    SciTech Connect (OSTI)

    1998-01-01

    Under DOE Contract No. DE-AR21-95MC32091, Steam Reforming of Low-Level Mixed Waste, ThermoChem has successfully designed, fabricated and operated a nominal 90 pound per hour Process Development Unit (PDU) on various low-level mixed waste surrogates. The design construction, and testing of the PDU as well as performance and economic projections for a 500- lb/hr demonstration and commercial system are described. The overall system offers an environmentally safe, non-incinerating, cost-effective, and publicly acceptable method of processing LLMW. The steam-reforming technology was ranked the No. 1 non-incineration technology for destruction of hazardous organic wastes in a study commissioned by the Mixed Waste Focus Area published April 1997.1 The ThermoChem steam-reforming system has been developed over the last 13 years culminating in this successful test campaign on LLMW surrogates. Six surrogates were successfidly tested including a 750-hour test on material simulating a PCB- and Uranium- contaminated solid waste found at the Portsmouth Gaseous Diffusion Plant. The test results indicated essentially total (>99.9999oA) destruction of RCRA and TSCA hazardous halogenated organics, significant levels of volume reduction (> 400 to 1), and retention of radlonuclides in the volume-reduced solids. Cost studies have shown the steam-reforming system to be very cost competitive with more conventional and other emerging technologies.

  4. Vehicle Lightweighting: 40% and 45% Weight Savings Analysis: Technical Cost Modeling for Vehicle Lightweighting

    SciTech Connect (OSTI)

    Mascarin, Anthony; Hannibal, Ted; Raghunathan, Anand; Ivanic, Ziga; Francfort, James

    2015-04-01

    The U.S. Department of Energy’s Vehicle Technologies Office, Materials area commissioned a study to model and assess manufacturing economics of alternative design and production strategies for a series of lightweight vehicle concepts. The strategic targets were a 40% and a 45% mass reduction relative to a standard North American midsize passenger sedan at an effective cost of $3.42 per pound (lb) saved. The baseline vehicle was an average of several available vehicles in this class. Mass and cost breakdowns from several sources were used, including original equipment manufacturers’ (OEMs’) input through U.S. Department of Energy’s Vehicle Technologies Office programs and public presentations, A2Mac1 LLC’s teardown information, Lotus Engineering Limited and FEV, Inc. breakdowns in their respective lightweighting studies, and IBIS Associates, Inc.’s decades of experience in automotive lightweighting and materials substitution analyses. Information on lightweighting strategies in this analysis came from these same sources and the ongoing U.S. Department of Energy-funded Vehma International of America, Inc. /Ford Motor Company Multi-Material Lightweight Prototype Vehicle Demonstration Project, the Aluminum Association Transportation Group, and many United States Council for Automotive Research’s/United States Automotive Materials Partnership LLC lightweight materials programs.

  5. ARM - Lesson Plans: Measuring Quantities of Gas

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    may otherwise be confusing Materials Each group of students will need the following: Food coloring or ink 1-liter measure 4 containers (approximately 2-liter capacity) Teat...

  6. Mercury Strategic Plan Outfall 200 Mercury Treatment Facility

    Office of Environmental Management (EM)

    more than 20 million pounds of mercury were used at Y-12 in a process that separated lithium isotopes for weapons production *Approximately 2 million pounds of mercury were ...

  7. Fact #556: February 2, 2009 Change in Material Content of Light...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The use of high and medium strength steel has increased from an average of 324 pounds per ... that same period while the use of stainless steel increased by only about 20 pounds. ...

  8. Word Pro - Untitled1

    U.S. Energy Information Administration (EIA) Indexed Site

    Million Pounds Uranium Oxide Concentrate Production 1985 1990 1995 2000 2005 2010 0 50 100 150 200 Million Pounds Uranium Oxide Total 1985 1990 1995 2000 2005 2010 0 10 20 30 40 50 ...

  9. Oak Ridge National Laboratory Environmental Management Portfolio...

    Office of Environmental Management (EM)

    challenges * More than 20 million pounds of mercury were used in early processing of lithium; over 700,000 pounds suspected to have been released to the environment * Four large...

  10. Microalgae as a source of liquid fuels. Final technical report. [200 references

    SciTech Connect (OSTI)

    Benemann, J.R.; Goebel, R.P.; Weissman, J.C.; Augenstein, D.C.

    1982-05-15

    The economics of liquid-fuels production from microalgae was evaluated. A detailed review of published economic analyses of microalgae biomass production revealed wide variations in the published costs, which ranged from several dollars per pound for existing commercial health-food production in the Far East, to less than .05/lb costs projected for microalgae biomass for fuel conversion. As little design information or specific cost data has been published, a credible cost estimate required the conceptual engineering design and cost estimating of microalgae to liquid-fuels processes. Two systems were analyzed, shallow (2 to 3'') covered ponds and deeper (1 ft) open ponds. Only the latter was selected for an in-depth analysis due to the many technical shortcomings of the former approach. Based on the cost analysis of a very simple and low cost process, the most optimistic costs extrapolated were about $60/barrel. These were based on many optimistic assumptions. Additional, more detailed, engieering and cost analyses would be useful. However, the major emphasis in future work in this area should be on demonstrating the basic premises on which this design was based: high productivity and oil content of microalgae strains that can dominate in open ponds and which can be harvested by a simple bioflocculation process. Several specific basic research needs were identified: (1) Fundamentals of species selection and control in open pond systems. Effects of environmental variables on species dominance is of particular interest. (2) Mechanisms of algae bioflocculation. (3) Photosynthetic pathways and efficiency under conditions of high lipid production. (4) Effects of non-steady state operating conditions, particularly pH (CO/sub 2/ availability), on productivity. 18 figures, 47 tables.

  11. COMPCOAL{trademark}: A profitable process for production of a stable high-Btu fuel from Powder River Basin coal

    SciTech Connect (OSTI)

    Smith, V.E.; Merriam, N.W.

    1994-10-01

    Western Research Institute (WRI) is developing a process to produce a stable, clean-burning, premium fuel from Powder River Basin (PRB) coal and other low-rank coals. This process is designed to overcome the problems of spontaneous combustion, dust formation, and readsorption of moisture that are experienced with PRB coal and with processed PRB coal. This process, called COMPCOAL{trademark}, results in high-Btu product that is intended for burning in boilers designed for midwestern coals or for blending with other coals. In the COMPCOAL process, sized coal is dried to zero moisture content and additional oxygen is removed from the coal by partial decarboxylation as the coal is contacted by a stream of hot fluidizing gas in the dryer. The hot, dried coal particles flow into the pyrolyzer where they are contacted by a very small flow of air. The oxygen in the air reacts with active sites on the surface of the coal particles causing the temperature of the coal to be raised to about 700{degrees}F (371{degrees}C) and oxidizing the most reactive sites on the particles. This ``instant aging`` contributes to the stability of the product while only reducing the heating value of the product by about 50 Btu/lb. Less than 1 scf of air per pound of dried coal is used to avoid removing any of the condensible liquid or vapors from the coal particles. The pyrolyzed coal particles are mixed with fines from the dryer cyclone and dust filter and the resulting mixture at about 600{degrees}F (316{degrees}C) is fed into a briquettor. Briquettes are cooled to about 250{degrees}F (121{degrees}C) by contact with a mist of water in a gas-tight mixing conveyor. The cooled briquettes are transferred to a storage bin where they are accumulated for shipment.

  12. U.S. Uranium Reserves Estimates

    Gasoline and Diesel Fuel Update (EIA)

    1. U.S. Forward-Cost Uranium Reserves by State, Year-End 2008 State 50lb 100lb Ore (million tons) Gradea (%) U3O8 (million lbs) Ore (million tons) Gradea (%) U3O8 (million lbs)...

  13. Optimization of a CNG series hybrid concept vehicle

    SciTech Connect (OSTI)

    Aceves, S.M.; Smith, J.R.; Perkins, L.J.; Haney, S.W.; Flowers, D.L.

    1995-09-22

    Compressed Natural Gas (CNG) has favorable characteristics as a vehicular fuel, in terms of fuel economy as well as emissions. Using CNG as a fuel in a series hybrid vehicle has the potential of resulting in very high fuel economy (between 26 and 30 km/liter, 60 to 70 mpg) and very low emissions (substantially lower than Federal Tier II or CARB ULEV). This paper uses a vehicle evaluation code and an optimizer to find a set of vehicle parameters that result in optimum vehicle fuel economy. The vehicle evaluation code used in this analysis estimates vehicle power performance, including engine efficiency and power, generator efficiency, energy storage device efficiency and state-of-charge, and motor and transmission efficiencies. Eight vehicle parameters are selected as free variables for the optimization. The optimum vehicle must also meet two perfect requirements: accelerate to 97 km/h in less than 10 s, and climb an infinitely long hill with a 6% slope at 97 km/h with a 272 kg (600 lb.) payload. The optimizer used in this work was originally developed in the magnetic fusion energy program, and has been used to optimize complex systems, such as magnetic and inertial fusion devices, neutron sources, and mil guns. The optimizer consists of two parts: an optimization package for minimizing non-linear functions of many variables subject to several non-linear equality and/or inequality constraints and a programmable shell that allows interactive configuration and execution of the optimizer. The results of the analysis indicate that the CNG series hybrid vehicle has a high efficiency and low emissions. These results emphasize the advantages of CNG as a near-term alternative fuel for vehicles.

  14. Office of Enterprise Assessments Review of the Los Alamos National...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Feedback Improvement Tracking System PMI Preventive Maintenance Instruction psi Pounds per Square ... The completed preventive and predictive maintenance forms required by ...

  15. Wise County, Virginia: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Appalachia, Virginia Big Stone Gap, Virginia Coeburn, Virginia Pound, Virginia St. Paul, Virginia Wise, Virginia Retrieved from "http:en.openei.orgwindex.php?titleWiseCo...

  16. EERE Success Story—New Jersey: Atlantic City Jitneys Running on Natural Gas

    Broader source: Energy.gov [DOE]

    EERE-funded project is estimated to reduce 1.76 million GGE/year and 607,364 pounds of carbon dioxide per year.

  17. c25.xls

    U.S. Energy Information Administration (EIA) Indexed Site

    per Building (million Btu) per Square Foot (thousand Btu) per Worker (million Btu) per Building (thousand dollars) per Square Foot (dollars) per Thousand Pounds (dollars) All...

  18. NNSA Conducts Experiment to Improve U.S. Ability to Detect Foreign...

    National Nuclear Security Administration (NNSA)

    The SPE-4 Prime experiment used a chemical explosive equivalent to 196 pounds of TNT in a contained, confined environment 286 feet below ground. Information gathered from this ...

  19. OREM Press Releases | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    18 years of operation and more than 35 million pounds of waste safely incinerated, the Toxic Substances Control Act (TSCA) Incinerator will shut down operations on December 2....

  20. http://ndep.nv.gov/bapc/capp/capp.html

    National Nuclear Security Administration (NNSA)

    CAPP regulates 40+ facilities handling nearly 30 Million Pounds of Highly Hazardous Substances State of Nevada Division of Environmental Protection Bureau of Air Pollution Control ...

  1. c26.xls

    U.S. Energy Information Administration (EIA) Indexed Site

    Btu) per Square Foot (thousand Btu) per Worker (million Btu) per Building (thousand dollars) per Square Foot (dollars) per Thousand Pounds (dollars) All Buildings...

  2. DOE - Office of Legacy Management -- General Electric Co - Shelbyville...

    Office of Legacy Management (LM)

    Compacted approximately 500 pounds of thorium (small pieces) into electrodes on 25 and ... Primary Radioactive Materials Handled: Thorium IN.07-1 Radiological Survey(s): Yes ...

  3. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    customers the fuel mix of its electricity production and the associated sulfur dioxide, nitrogen oxide, and carbon dioxide emissions emissions, expressed in pounds per 1000...

  4. Fuel Mix and Emissions Disclosure | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    customers the fuel mix of its electricity production and the associated sulfur dioxide, nitrogen oxide, and carbon dioxide emissions emissions, expressed in pounds per 1000...

  5. This Week In Petroleum Printer-Friendly Version

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    to raise the temperature of 1 pound of liquid water by 1 degree Fahrenheit at the temperature at which water has its greatest density (approximately 39 degrees...

  6. Nylon Carpet Recycling | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    currently in operation, ENR is drawing from over 40 carpet collection facilities across the nation and has collectively kept over 200 million pounds of carpet out of landfills. ...

  7. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    tax on a gallon equivalent basis. Alternative fuels include natural gas, propane, hydrogen, and hythane. A gallon equivalent is defined as 5.660 pounds (lbs.) of compressed...

  8. Bioenergy Technologies Office Conversion R&D Pathway: Whole Algae...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Microalgal biomass grown via autotrophic pathways is dewatered to 20% solids concentration. * The slurry of whole algae reacts in a pressure vessel (2000-3000 pounds per square ...

  9. Sandia National Laboratories: News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    more... 39,000 Pounds of Ceiling Tiles Recycled December 21, 2010 - Read more... Sustainable Products at Fleet Services December 17, 2010 - Read more... Gold Standard:...

  10. Packaging, Transportation and Recycling of NPP Condenser Modules - 12262

    SciTech Connect (OSTI)

    Polley, G.M. [Perma-Fix Environmental Services, 575 Oak Ridge Turnpike, Oak Ridge, TN 37830 (United States)

    2012-07-01

    Perma-Fix was awarded contract from Energy Northwest for the packaging, transportation and disposition of the condenser modules, water boxes and miscellaneous metal, combustibles and water generated during the 2011 condenser replacement outage at the Columbia Generating Station. The work scope was to package the water boxes and condenser modules as they were removed from the facility and transfer them to the Perma-Fix Northwest facility for processing, recycle of metals and disposition. The condenser components were oversized and overweight (the condenser modules weighed ?102,058 kg [225,000 lb]) which required special equipment for loading and transport. Additional debris waste was packaged in inter-modals and IP-1 boxes for transport. A waste management plan was developed to minimize the generation of virtually any waste requiring landfill disposal. The Perma-Fix Northwest facility was modified to accommodate the ?15 m [50-ft] long condenser modules and equipment was designed and manufactured to complete the disassembly, decontamination and release survey. The condenser modules are currently undergoing processing for free release to a local metal recycler. Over three millions pounds of metal will be recycled and over 95% of the waste generated during this outage will not require land disposal. There were several elements of this project that needed to be addressed during the preparation for this outage and the subsequent packaging, transportation and processing. - Staffing the project to support 24/7 generation of large components and other wastes. - The design and manufacture of the soft-sided shipping containers for the condenser modules that measured ?15 m X 4 m X 3 m [50 ft X 13 ft X 10 ft] and weighed ?102,058 kg [225,000 lbs] - Developing a methodology for loading the modules into the shipping containers. - Obtaining a transport vehicle for the modules. - Designing and modifying the processing facility. - Movement of the modules at the processing facility. If any of these issues were not adequately resolved prior to the start of the outage, costly delays would result and the re-start of the power plant could be impacted. The main focus of this project was to find successful methods for keeping this material out of the landfills and preserving the natural resources. In addition, this operation provided a significant cost savings to the public utility by minimizing landfill disposal. The onsite portion of the project has been completed without impact to the overall outage schedule. By the date of presentation, the majority of the waste from the condenser replacement project will have been processed and recycled. The goals for this project included helping Energy Northwest maintain the outage schedule, package and characterize waste compliantly, perform transportation activities in compliance with 49CFR (Ref-1), and minimize the waste disposal volume. During this condenser replacement project, over three millions pounds of waste was generated, packaged, characterized and transported without injury or incident. It is anticipated that 95% of the waste generated during this project will not require landfill disposal. All of the waste is scheduled to be processed, decontaminated and recycled by June of 2012. (authors)

  11. AISI/DOE Technology Roadmap Program Hot Oxygen Injection Into The Blast Furnace

    SciTech Connect (OSTI)

    Michael F. Riley

    2002-10-21

    Increased levels of blast furnace coal injection are needed to further lower coke requirements and provide more flexibility in furnace productivity. The direct injection of high temperature oxygen with coal in the blast furnace blowpipe and tuyere offers better coal dispersion at high local oxygen concentrations, optimizing the use of oxygen in the blast furnace. Based on pilot scale tests, coal injection can be increased by 75 pounds per ton of hot metal (lb/thm), yielding net savings of $0.84/tm. Potential productivity increases of 15 percent would yield another $1.95/thm. In this project, commercial-scale hot oxygen injection from a ''thermal nozzle'' system, patented by Praxair, Inc., has been developed, integrated into, and demonstrated on two tuyeres of the U.S. Steel Gary Works no. 6 blast furnace. The goals were to evaluate heat load on furnace components from hot oxygen injection, demonstrate a safe and reliable lance and flow control design, and qualitatively observe hot oxygen-coal interaction. All three goals have been successfully met. Heat load on the blowpipe is essentially unchanged with hot oxygen. Total heat load on the tuyere increases about 10% and heat load on the tuyere tip increases about 50%. Bosh temperatures remained within the usual operating range. Performance in all these areas is acceptable. Lance performance was improved during testing by changes to lance materials and operating practices. The lance fuel tip was changed from copper to a nickel alloy to eliminate oxidation problems that severely limited tip life. Ignition flow rates and oxygen-fuel ratios were changed to counter the effects of blowpipe pressure fluctuations caused by natural resonance and by coal/coke combustion in the tuyere and raceway. Lances can now be reliably ignited using the hot blast as the ignition source. Blowpipe pressures were analyzed to evaluate ht oxygen-coal interactions. The data suggest that hot oxygen increases coal combustion in the blow pipe and tuyere by 30, in line with pilot scale tests conducted previously.

  12. Administrator's Record of Decision, June 2001

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    will be used to reduce the level of the LB CRAC. * Fourth, BPA added termination language to the contingency clause to address concerns raised by preference customers that...

  13. PL2ESIDCNI The District Engineer, U. S. Engineer Office,

    Office of Legacy Management (LM)

    w. -1. C1P.RSHAW PL2ESIDCNI The District Engineer, U. S. Engineer Office, Kanhattan liistrict, l-J. 0. Box 42, Station New York, N. Y. fi s Attention: Lt. L. C. Burman. Dear Sir: Agreeable to your verbal request, we offer you the following which are all the Uranium Compounds and Cermic Colors containing Uranium in our possession at, our various stock points. ,I ---L-z-- BIACY'C:fln;" URAXW (Approximately 9$ U33,) QOC3 lb. amer lb., f.o.b. East Liverpool, Ohio. ~500 lb. at $2.15 Fer lb.,

  14. SUSS PM 5 Analytic Probe

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    microprobe station to perform resist adhesion test. The apparatus is equipped with a 10 lb. linear motor, two microprobes and a CCD camera for observation. Capabilities: Capable...

  15. Economics of large-scale thorium oxide production: assessment of domestic resources

    SciTech Connect (OSTI)

    Young, J.K.; Bloomster, C.H.; Enderlin, W.I.; Morgenstern, M.H.; Ballinger, M.Y.; Drost, M.K.; Weakley, S.A.

    1980-02-01

    The supply curve illustrates that sufficient amounts of thorium exist supply a domestic thorium-reactor economy. Most likely costs of production range from $3 to $60/lb ThO/sub 2/. Near-term thorium oxide resources include the stockpiles in Ohio, Maryland, and Tennessee and the thorite deposits at Hall Mountain, Idaho. Costs are under $10/lb thorium oxide. Longer term economic deposits include Wet Mountain, Colorado; Lemhi Pass, Idaho; and Palmer, Michigan. Most likely costs are under $20/lb thorium oxide. Long-term deposits include Bald Mountain, Wyoming; Bear Lodge, Wyoming; and Conway, New Hampshire. Costs approximately equal or exceed $50/lb thorium oxide.

  16. Microsoft PowerPoint - Puretzky_2015_StaffScienceHighlight_ACSNano...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ab initio calculations and group theory analysis corroborate the experimental assignments ... at RPI. L.B. acknowledges the financial support of the National Secretariat of ...

  17. Microsoft PowerPoint - Li_2015_UserProjectHighlight_AngewChemie...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A coordinated synthesis, characterization, modeling, and theory development enable ... DE-AC02- 05CH11231. L.B. acknowledges the financial support of the National Secretariat of ...

  18. Urea SCR Durability Assessment for Tier 2 Light-Duty Truck

    Broader source: Energy.gov [DOE]

    Summarizes progress toward development of a durable urea SCR system to meet Tier 2 Bin 5 on 3780 lb light truck

  19. Characterization of microstructural strengthening in the heat...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... BA-160 is a low-carbon martensiticbainite steel ... by employing calcu- lated heat treatment conditions. ... J (130 ft-lb) at room temperature was achieved through the ...

  20. Help:Sandbox/Teriyaki Chicken | Open Energy Information

    Open Energy Info (EERE)

    as much) 2 cloves: garlic (alternative: more garlic) 1 lb: chicken (alternative: other protein, although for beef or pork) Retrieved from "http:en.openei.orgw...

  1. Help:Sandbox/Extended Hamburgers | Open Energy Information

    Open Energy Info (EERE)

    as desired serve on roll with usual condiments 1 lb: hamburger (alternative: ground turkey, or ground pork with some spices to make sausage) 1: egg (alternative:...

  2. Charity Event Gives Department Employees an Excuse to Play with Their Food

    Broader source: Energy.gov [DOE]

    At the Energy Department Feeds Families Sculpture Contest, employees from across the organization made sculptures out of packaged food and household products to support the larger federal effort to help feed needy families in D.C. and beyond. In the end, participants donated 2,160 pounds of food at the event and pledged 130 pounds more.

  3. Foam vessel for cryogenic fluid storage

    DOE Patents [OSTI]

    Spear, Jonathan D

    2011-07-05

    Cryogenic storage and separator vessels made of polyolefin foams are disclosed, as are methods of storing and separating cryogenic fluids and fluid mixtures using these vessels. In one embodiment, the polyolefin foams may be cross-linked, closed-cell polyethylene foams with a density of from about 2 pounds per cubic foot to a density of about 4 pounds per cubic foot.

  4. EM Rockets Past Target for Donations to Stock Food Banks

    Broader source: Energy.gov [DOE]

    WASHINGTON, D.C. – EM donated close to 50,000 pounds of non-perishable items to the Fourth Annual Feds Feed Families Campaign, easily surpassing its target of 19,120 pounds. All donations were delivered directly to food banks to provide goods to the needy.

  5. H. R. 4177: A Bill to amend the Internal Revenue Code of 1986 to impose an excise tax on sulfur dioxide and nitrogen oxide emissions from utility plants. Introduced in the House of Representatives, One Hundredth First Congress, Second Session, March 5, 1990

    SciTech Connect (OSTI)

    Not Available

    1990-01-01

    The tax imposed would begin in 1991 in the amount of 15 cents per pound of sulfur dioxide released and 10 cents per pound nitrogen oxide, and would increase so that the tax in 1997 and thereafter would be 45 cents per pound of sulfur dioxide and 30 cents per pound of nitrogen oxide released. An inflation adjustment is provided for years after 1997. The tax is imposed on emissions which exceed the exemption level for each pollutant, and these levels are specified herein as pounds exempted per million Btu's of fuel burned. No tax is imposed on units less than 75 megawatts, or units providing less than one-third of the electricity produced to a utility power distribution system for sale.

  6. 2015 Domestic Uranium Production Report

    U.S. Energy Information Administration (EIA) Indexed Site

    5 2015 Domestic Uranium Production Report Release Date: May 5, 2016 Next Release Date: May 2017 Production / Mining Method 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 (estimated contained thousand pounds U 3 O 8 ) W W W W W W W W W W W W W (estimated contained thousand pounds U 3 O 8 ) 0 0 0 0 0 0 0 0 0 0 0 0 0 (thousand pounds U 3 O 8 ) W W 2,681 4,259 W W W W W W W W W (thousand pounds U 3 O 8 ) W W W W W W W W W W W W W (thousand pounds U 3 O 8 ) E2,200 2,452 3,045 4,692

  7. Process steam production from cotton gin trash

    SciTech Connect (OSTI)

    LePori, W.A.; Carney, D.B.; Lalk, T.R.; Anthony, R.G.

    1981-01-01

    A steam producing system based on fluidized-bed gasification of biomass materials is discussed. Limited experimental results are discussed and show that steam has been produced at rates of 334.3 kg/hr. (737 lbs/hr.) with 2.8 kg of stream produced for each kilogram of cotton gin trash (2.8 lb/lb.). ref.

  8. Long-Term Carbon Injection Field Test for 90% Mercury Removal for a PRB Unit a Spray Dryer and Fabric Filter

    SciTech Connect (OSTI)

    Sjostrom, Sharon; Amrhein, Jerry

    2009-04-30

    The power industry in the U.S. is faced with meeting regulations to reduce the emissions of mercury compounds from coal-fired plants. Injecting a sorbent such as powdered activated carbon (PAC) into the flue gas represents one of the simplest and most mature approaches to controlling mercury emissions from coal-fired boilers. The purpose of this test program was to evaluate the long-term mercury removal capability, long-term mercury emissions variability, and operating and maintenance (O&M) costs associated with sorbent injection on a configuration being considered for many new plants. Testing was conducted by ADA Environmental Solutions (ADA) at Rocky Mountain Powers (RMP) Hardin Station through funding provided by DOE/NETL, RMP, and other industry partners. The Hardin Station is a new plant rated at 121 MW gross that was first brought online in April of 2006. Hardin fires a Powder River Basin (PRB) coal and is configured with selective catalytic reduction (SCR) for NOx control, a spray dryer absorber (SDA) for SO2 control, and a fabric filter (FF) for particulate control. Based upon previous testing at PRB sites with SCRs, very little additional mercury oxidation from the SCR was expected at Hardin. In addition, based upon results from DOE/NETL Phase II Round I testing at Holcomb Station and results from similarly configured sites, low native mercury removal was expected across the SDA and FF. The main goal of this project was metsorbent injection was used to economically and effectively achieve 90% mercury control as measured from the air heater (AH) outlet to the stack for a period of ten months. This goal was achieved with DARCO Hg-LH, Calgon FLUEPAC-MC PLUS and ADA Power PAC PREMIUM brominated activated carbons at nominal loadings of 1.52.5 lb/MMacf. An economic analysis determined the twenty-year levelized cost to be 0.87 mills/kW-hr, or $15,000/lb Hg removed. No detrimental effects on other equipment or plant operations were observed. The results of this project also filled a data gap for plants firing PRB coal and configured with an SCR, SDA, and FF, as many new plants are being designed today. Another goal of the project was to evaluate, on a short-term basis, the mercury removal associated with coal additives and coal blending with western bituminous coal. The additive test showed that, at this site, the coal additive known as KNX was affective at increasing mercury removal while decreasing sorbent usage. Coal blending was conducted with two different western bituminous coals, and West Elk coal increased native capture from nominally 10% to 50%. Two additional co-benefits were discovered at this site. First, it was found that native capture increased from nominally 10% at full load to 50% at low load. The effect is believed to be due to an increase in mercury oxidation across the SCR caused by a corresponding decrease in ammonia injection when the plant reduces load. Less ammonia means more active oxidation sites in the SCR for the mercury. The second co-benefit was the finding that high ammonia concentrations can have a negative impact on mercury removal by powdered activated carbon. For a period of time, the plant operated with a high excess of ammonia injection necessitated by the plugging of one-third of the SCR. Under these conditions and at high load, the mercury control system could not maintain 90% removal even at the maximum feed rate of 3.5 lb/MMacf (pounds of mercury per million actual cubic feet). The plant was able to demonstrate that mercury removal was directly related to the ammonia injection rate in a series of tests where the ammonia rate was decreased, causing a corresponding increase in mercury removal. Also, after the SCR was refurbished and ammonia injection levels returned to normal, the mercury removal performance also returned to normal. Another goal of the project was to install a commercial-grade activated carbon injection (ACI) system and integrate it with new-generation continuous emissions monitors for mercury (Hg-CEMs) to allow automatic feedback control on outlet me

  9. Metabolism of chlorobiphenyls by a variant biphenyl dioxygenase exhibiting enhanced activity toward dibenzofuran

    SciTech Connect (OSTI)

    Viger, Jean-Francois; Mohammadi, Mahmood; Barriault, Diane; Sylvestre, Michel

    2012-03-09

    Highlights: Black-Right-Pointing-Pointer Burkholderia xenovorans LB400 biphenyl dioxygenase (BphAE{sub LB400}) metabolizes PCBs. Black-Right-Pointing-Pointer Asn338Gln/Leu409Phe double mutation speeds up electron transfer of enzyme reaction. Black-Right-Pointing-Pointer We tested how the mutations affect the PCB-degrading abilities of BphAE{sub LB400} variants. Black-Right-Pointing-Pointer The same mutations also broaden the PCB substrate range of BphAE{sub LB400} variants. -- Abstract: The biphenyl dioxygenase of Burkholderia xenovorans LB400 (BphAE{sub LB400}) catalyzes the dihydroxylation of biphenyl and of several polychlorinated biphenyls (PCBs) but it poorly oxidizes dibenzofuran. In this work we showed that BphAE{sub RR41}, a variant which was previously found to metabolize dibenzofuran more efficiently than its parent BphAE{sub LB400}, metabolized a broader range of PCBs than BphAE{sub LB400}. Hence, BphAE{sub RR41} was able to metabolize 2,6,2 Prime ,6 Prime -, 3,4,3 Prime ,5 Prime - and 2,4,3 Prime ,4 Prime -tetrachlorobiphenyl that BphAE{sub LB400} is unable to metabolize. BphAE{sub RR41} was obtained by changing Thr335Phe336Asn338Ile341Leu409 of BphAE{sub LB400} to Ala335Met336Gln338Val341Phe409. Site-directed mutagenesis was used to create combinations of each substitution, in order to assess their individual contributions. Data show that the same Asn338Glu/Leu409Phe substitution that enhanced the ability to metabolize dibenzofuran resulted in a broadening of the PCB substrates range of the enzyme. The role of these substitutions on regiospecificities toward selected PCBs is also discussed.

  10. livermore | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    livermore NNSA Livermore Field Office donates over 4,000 pounds of food to food banks The NNSA Livermore Field Office in California donated over 4,000 pounds of food to local food banks, food pantries and other local groups in support of the 2015 Feds Feed Families campaign. As part of the campaign LFO staff, family and friends worked with The Urban Farmers to pick 600 pounds of... Catch up on the latest Sandia California news Each summer, Sandia National Laboratories focuses on news and events

  11. EERE Success Story-Energizing the "K-Gray" Community: Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The creation of an energy-literate society is critical in advancing the next generation's energy workforce. EERE is providing the energy principles and concepts that are essential ...

  12. Educated and Equipped: Motivating Today's Youth to Become Tomorrow...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    STEM-literate workers are the engineers who design solar panels, wind turbines, and improved ... Find more STEM opportunities on ED's website. USA Science & Engineering Festival - Last ...

  13. Maryland Biodiesel | Open Energy Information

    Open Energy Info (EERE)

    Biodiesel Jump to: navigation, search Name: Maryland Biodiesel Place: Berlin, Maryland Product: Maryland Biodiesel operates the 3.7m liter biodiesel plant in Berlin, Maryland....

  14. Heartland biodiesel LLC | Open Energy Information

    Open Energy Info (EERE)

    biodiesel LLC Jump to: navigation, search Name: Heartland biodiesel LLC Place: Rock Port, Missouri Product: Biodiesel producer which is currently developing a 113m liter plant in...

  15. Office of Secure Transportation Celebrates 40th Anniversary ...

    National Nuclear Security Administration (NNSA)

    Deputy Secretary of Energy Dr. Elizabeth Sherwood-Randall congratulated OST on 40 years of success. "During these past forty years, OST Agents have literally driven the distance ...

  16. Viralcool | Open Energy Information

    Open Energy Info (EERE)

    Viralcool Jump to: navigation, search Name: Viralcool Place: Brazil Product: This company operates the 90m liter Viralcool I bioethanol plant located in Pitangueiras in the state...

  17. Energy 101: Solar Photovoltaics | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    February 10, 2011 - 5:29pm Addthis Learn more about photovoltaic systems that convert ... What are the key facts? The literal translation of the word photovoltaic is ...

  18. Filter Specialty Bioenergy | Open Energy Information

    Open Energy Info (EERE)

    Filter Specialty Bioenergy Jump to: navigation, search Name: Filter Specialty Bioenergy Place: Autryville, NC, North Carolina Product: The company runs a 6m liter biodiesel plant...

  19. Long-Term Surveillance and Maintenance Plan for the Pinellas...

    Office of Legacy Management (LM)

    ... Appendix E Inspection Checklist Appendix F Contact List ... MCL maximum contaminant level mgL milligrams per liter ... Center SWMU solid-waste management unit USC United States ...

  20. Microsoft Word - N01058_LTSM Plan.doc

    Office of Legacy Management (LM)

    ... Appendix E Inspection Checklist Appendix F Contact List ... MCL maximum contaminant level mgL milligrams per liter ... Center SWMU solid-waste management unit VOCs volatile ...

  1. When DNA Needs to Stand Up and Be Counted

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    biomolecules must be properly oriented to perform their biological function. In other words, the DNA literally must stand up to be counted. Understanding both the attachment...

  2. ORISE Science Education Programs: How to Work with Us

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    How to Work with Us The Oak Ridge Institute for Science and Education (ORISE) administers high-quality, experience-based research programs to facilitate a scientifically literate...

  3. SREL Reprint #3164

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    an individual or population has the ability to read about, write about, and comprehend environmental issues. . . The benefits of having an environmentally literate public are...

  4. Keystone Biofuels | Open Energy Information

    Open Energy Info (EERE)

    Keystone Biofuels Jump to: navigation, search Name: Keystone Biofuels Place: Shiremanstown, Pennsylvania Product: Biodiesel producer that runs a 3.7m liter plant in Pennsylvania....

  5. Temperature effects on airgun signatures (Journal Article) |...

    Office of Scientific and Technical Information (OSTI)

    Search Title: Temperature effects on airgun signatures Experiments in an 850 liter water tank were performed in order to study temperature effects on airgun signatures, and to...

  6. Welcome to EMSL | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Onward... Researchers are literally taking their science onward and upward using Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry (MS).... Read More >>...

  7. Microsoft Word - fact sheet alternatives and key findings 090214...

    National Nuclear Security Administration (NNSA)

    projected, tritium concentration at any drinking water intake would remain well below the maximum permissible EPA drinking water limit of 20,000 picocuries per liter. Tritium ...

  8. Cool CAVEs

    Broader source: Energy.gov [DOE]

    The Idaho National Laboratory's "CAVE" -- 3-D Computer-Assisted Virtual Environment –- allows scientists to literally walk into their data and look at it from multiple perspectives.

  9. Microsoft Word - DOE-ID-15-029 Washington State EC B3-6.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 liters of chemical waste is expected to be generated which may include organic solvents (for example: ethanol) and inorganic aqueous solutions (for example: NaOH, HCL,...

  10. Imagine Tomorrow: Student Competition Leads to Innovative Biofuel...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Montana to develop creative, well-researched solutions to complex energy challenges. ... by using solar panels and four 85-liter tanks to cultivate algae for biofuel production. ...

  11. DuPont hikes butanediol

    SciTech Connect (OSTI)

    Morris, G.D.L.

    1997-05-14

    Butanediol (BDO) and its derivatives continue to be strong, a positive sign for the many companies planning expansions. DuPont - one of only two global producers not planning capacity additions - has announced that it will discontinue all off-schedule pricing for BDO and two important derivatives, tetrahydrofuran (THF) and polytetramethylene ether glycol (PTMEG). DuPont`s list prices are $1.00/lb fob for BDO, about $1.40/lb for THF, and $2.00/lb for PTMEG. The price adjustment is effective this month or as contracts allow.

  12. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Experimental Vehicle Definition and Requirements A vehicle weighing 6,000 pounds or less that is primarily powered by a source other than a combustion engine may be considered an...

  13. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    has a maximum speed greater than 20 miles per hour (mph) but not more than 25 mph and has a gross vehicle weight rating less than 3,000 pounds. (Reference Arkansas Code 23-112-103...

  14. Heart

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Heart of the upgrade: The NSTX-U center stack consists of 36 22-foot- long, 350-pound copper conductors. Time flies: Technicians spent more than 360,000 worker hours building the...

  15. NNSA Supports NASA MARS Scientific Laboratory Launch | National...

    National Nuclear Security Administration (NNSA)

    made up of just more than 10 pounds of plutionium-238, and NNSA personnel were there in the unlikely event of an accident involving the Atlas V Rocket carrying the Curiosity rover. ...

  16. A I K E N

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and sizes. The 250-pound feldspar crystal can be touched, stroked, and hugged, so children can run their hands along the crystal faces and consider how neat it is that it...

  17. Ames Lab at a Glance | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Ames Project produced more than 2,000,000 pounds of pure uranium for the Manhattan Project. In 1947, the Atomic Energy Commission formally established the Ames Laboratory. At ...

  18. 2015 Uranium Marketing Annual Report

    U.S. Energy Information Administration (EIA) Indexed Site

    2015 Uranium Marketing Annual Report 2015 Uranium Marketing Annual Report Release Date: May 24, 2016 Next Release Date: May 2017 thousand pounds U 3 O 8 equivalent Year Maximum ...

  19. 2015 Uranium Marketing Annual Report

    U.S. Energy Information Administration (EIA) Indexed Site

    2015 Uranium Marketing Annual Report Release Date: May 24, 2016 Next Release Date: May ... and 16. 2003-15-Form EIA-858, "Uranium Marketing Annual Survey". million pounds U 3 O 8 ...

  20. LANL Conducts Watusi Experiment | National Nuclear Security Administra...

    National Nuclear Security Administration (NNSA)

    Test Site, NV The Los Alamos National Laboratory conducts Watusi, a spectacular high-explosives experiment with a yield equivalent to about 37,000 pounds of TNT, at the Nevada Test ...

  1. Monthly Biodiesel Production Report

    U.S. Energy Information Administration (EIA) Indexed Site

    U.S. Inputs to biodiesel production million pounds Period Canola oil Corn oil Cottonseed ... Source: U.S. Energy Information Administration, Form EIA-22M "Monthly Biodiesel Production ...

  2. Parkersburg, West Virginia, Disposal Site Fact Sheet

    Office of Legacy Management (LM)

    During its years of operation, the mill processed an estimated 2 million pounds of ... The two DOE wells are currently sampled every 5 years as a best management practice. To ...

  3. Domestic Uranium Production Report - Quarterly

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    1. Total production of uranium concentrate in the United States, 1996 - 3rd quarter 2015 pounds U3O8 Calendar-year quarter 1st quarter 2nd quarter 3rd quarter 4th quarter...

  4. Electrohydraulic Forming of Near Net Shape Automotive Panels

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    million vehicles annually that each contain 900 pounds of stamped steel sheet metal parts. ... to limit their capabilities to a single family of materials, such as steel or aluminum. ...

  5. Fact #786: July 1, 2013 Use of Lightweight Materials is on the...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and in many cases, aluminum wheels have replaced heavier steel wheels as standard equipment. Use of regular steel has declined by an average of 172 pounds per vehicle from 1995 ...

  6. Uranium Marketing Annual Report

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    nuclear power reactors, 1994-2014 million pounds U3O8 equivalent million separative work units (SWU) Year Feed deliveries by owners and operators of U.S. civilian nuclear ...

  7. EDS V25 containment vessel explosive qualification test report.

    SciTech Connect (OSTI)

    Rudolphi, John Joseph

    2012-04-01

    The V25 containment vessel was procured by the Project Manager, Non-Stockpile Chemical Materiel (PMNSCM) as a replacement vessel for use on the P2 Explosive Destruction Systems. It is the first EDS vessel to be fabricated under Code Case 2564 of the ASME Boiler and Pressure Vessel Code, which provides rules for the design of impulsively loaded vessels. The explosive rating for the vessel based on the Code Case is nine (9) pounds TNT-equivalent for up to 637 detonations. This limit is an increase from the 4.8 pounds TNT-equivalency rating for previous vessels. This report describes the explosive qualification tests that were performed in the vessel as part of the process for qualifying the vessel for explosive use. The tests consisted of a 11.25 pound TNT equivalent bare charge detonation followed by a 9 pound TNT equivalent detonation.

  8. Incinerator Completes Mission in Oak Ridge

    Broader source: Energy.gov [DOE]

    After more than 18 years of operation and more than 35 million pounds of waste safely incinerated, the Toxic Substances Control Act (TSCA) Incinerator will shut down operations on December 2.

  9. Under Secretary Klotz packs last crate at Kansas City Plant ...

    National Nuclear Security Administration (NNSA)

    thousands of pieces of equipment, some weighing as little as six ounces to a milling machine weighing 87,000 pounds. Later in the day, General Klotz thanked everyone who was...

  10. Coca-Cola Refreshments Class 8 Diesel Electric Hybrid Tractor...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... GPS global positioning system HEV hybrid electric vehicle HHDDT Heavy Heavy-Duty Diesel Truck KI kinetic intensity lbs pounds mi miles mph miles per hour NO x nitrogen ...

  11. Fact #627: June 14, 2010 Idle Reduction for Heavy Trucks

    Broader source: Energy.gov [DOE]

    In order to encourage the use of idling reduction devices in large trucks, the Energy Policy Act of 2005 allowed for a 400-pound weight exemption for the additional weight of idling reduction...

  12. Demolitions Produce Recyclable Materials for Organization Promoting Economic Activity

    Broader source: Energy.gov [DOE]

    Demolitions have helped generate more than 8 million pounds of metal at the Piketon site for recycling, further promoting economic activity in the region thanks to the American Recovery and...

  13. August 2013 | National Nuclear Security Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    with four showering units, water supply, self-contained waste handling, two 80-pound propane tanks and its own generator. It is intended for use in decontaminating victims in...

  14. Iowa Powder Atomization Technologies, Inc. | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    as aerospace components. Dr. Randall German reported in 2009 that saving 2.2 pounds of weight on an aircraft is ... resistance. Learn More SH Coatings LP Oak Ridge National ...

  15. Employees give to local food bank

    Broader source: Energy.gov [DOE]

    Employees in DOE's Oak Ridge Office of EM donated 3,209 pounds of food to the Second Harvest Food Bank of East Tennessee. The donation was part of the national Feds Feed Families campaign.

  16. C:\\ANNUAL\\Vol2chps.v8\\ANNUAL2.VP

    Gasoline and Diesel Fuel Update (EIA)

    Aquifer Field: A sub-surface facility for storing natural gas consisting of water-bearing ... temperature of 1 pound of water by 1 degree Fahrenheit at or near 39.2 degrees Fahrenheit. ...

  17. WSRC-MS-99-00210

    Office of Scientific and Technical Information (OSTI)

    included standard machining, gas-tungsten arc (GTA) welding, pinch welding, and casting. Each assembly is small enough to hold in two hands and weighs 44 pounds or less....

  18. Photo Gallery: Argonne OutLoud: "Invisible Influence: A Bacterial...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In fact, we have approximately 2-3 pounds of bacteria living on and in our bodies - the same weight as the human brain. Like the brain and other valuable organs, this microbial ...

  19. Appendix J - GPRA06 vehicle technologies program

    SciTech Connect (OSTI)

    None, None

    2009-01-18

    The target market for the Office of FreedomCAR and Vehicle Technologies (FCVT) program include light vehicles (cars and light trucks) and heavy vehicles (trucks more than 10,000 pounds Gross Vehicle Weight).

  20. EA-1123: Transfer of Normal and Low-Enriched Uranium Billets to the United Kingdom, Hanford Site, Richland, Washington

    Broader source: Energy.gov [DOE]

    This EA evaluates the environmental impacts of the proposal to transfer approximately 710,000 kilograms (1,562,000 pounds) of unneeded normal and low-enriched uranium to the United Kingdom; thus,...

  1. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    thermal units and a GGE of liquefied natural gas (LNG) must be at least 6.06 pounds. ... LNG is defined as methane or natural gas in the form of a cryogenic or refrigerated liquid ...

  2. This Week In Petroleum Summary Printer-Friendly Version

    Gasoline and Diesel Fuel Update (EIA)

    California pipelines require the RVP of gasoline shipped on their systems to transition from the December-January specification of 15 pounds per square inch (psi) to 13.5...

  3. 2005 Residential Energy Consumption Survey

    U.S. Energy Information Administration (EIA) Indexed Site

    ... foot at a pressure base of 14.73 pounds standard per square inch absolute and a temperature base of 60 degrees Fahrenheit; Cubic meter is a unit of measure which equals 35.314 ...

  4. NNSA Production Office tops Feds Feed Families campaign goal...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - 9:45am Oak Ridge, Tenn. - Employees of the National Nuclear Security Administration Production Office have donated 17,348 pounds of food as part of the annual U.S. Department...

  5. RAPID/Roadmap/6-ID-a | Open Energy Information

    Open Energy Info (EERE)

    load A load is overlegal if the load is: width over 8'6"; Over 14' tall; Truck and trailer combined are over 75' long; or The load weighs over 80,000 pounds. 6-ID-a.2 - Meet...

  6. CX-005320: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    700/100 Pounds Per Square Inch Compressor Additional Filtration ProjectCX(s) Applied: B2.5Date: 02/24/2011Location(s): Morgantown, West VirginiaOffice(s): Fossil Energy, National Energy Technology Laboratory

  7. U

    Gasoline and Diesel Fuel Update (EIA)

    ... Glycerol Production b. Other Co-Product Production c. Was Glycerol Purity Verified By Laboratory Test? (Yes or No) C. Inputs to Production Pounds a. Feedstocks used in B100 ...

  8. Implementing a Corporate Energy Management System

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Our progress toward sustainability 3M 2010. All Rights ... Corporate Energy Policy Applies To: This policy applies to ... Energy Trend BtuPound of Product 23,843 18,761 17,845 ...

  9. Fuel Mix and Emissions Disclosure | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Customer Choice and Electric Reliability Act of 2000 (P.A. 141) requires electric suppliers to disclose to customers details related to the fuel mix and emissions, in pounds...

  10. Risk Removal | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EM has separated Oak Ridge's risk into three major categories: Environmental Risk - During the Manhattan Project and Cold War, Y-12's operations lost as much as 700,000 pounds of ...

  11. Overview of VTO Material Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Acceptable Cost Per Pound of Weight Saved EIA Projected Gas Price (High Case) 3.50 per ... Magnesium Alloys Aluminum Alloys China, 80% U.S., 7% Russia, 4% Others , 9% When it ...

  12. DOE - Office of Legacy Management -- University of California...

    Office of Legacy Management (LM)

    Subject: List of California Sites; May 17, 1989 CA.05-3 - AEC Memorandum; Ball to Smith; Subject: 500 Pounds UO3 - SR-1952; July 10, 1951 CA.05-4 - AEC Memorandum; Blatzs to ...

  13. DOE-HDBK-1169-2003; DOE Handbook Nuclear Air Cleaning Handbook

    Office of Environmental Management (EM)

    TECHNICAL STANDARDS NOVEMBER 2003 TS INCH-POUND DOE-HDBK-1169-2003 DOE HANDBOOK NUCLEAR AIR CLEANING HANDBOOK U.S. Department of Energy Washington, DC 20585 DISTRIBUTION STATEMENT ...

  14. Simulations aimed at safer transport of explosives | Argonne...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    click to view larger. Simulations aimed at safer transport of explosives By Jim Collins * January 7, 2015 Tweet EmailPrint In 2005, a semi truck hauling 35,000 pounds of...

  15. Slide 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    December 2010 - Mtg was held wU.S. Fish and Wildlife Service (FWS) and MO Dept of ... however, an estimated 2,000 pounds of fish were killed. Mortalities caused by ...

  16. removal

    National Nuclear Security Administration (NNSA)

    80 pounds) of highly enriched uranium (HEU) spent fuel from the Institute of Nuclear Physics (INP) in Almaty, Kazakhstan. The HEU was transported via two air shipments to a...

  17. I HEAVY MINERALS CO. 836 South Michigan Avenue Chic&o-5, Illinois

    Office of Legacy Management (LM)

    Chattanooga, Term. , of 4, 25 per pound of contained thorium oxide (ThOZ), both prices to be subject to a mutually agree- able escalation clause. Very truly yours, HEAVY MINERALS ...

  18. Microsoft Word - Cleaning_Up_the_Idaho_Site_3_.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    or radioactive targeted waste materials that have been packaged into more than 5,500 drums (1,144 cubic meters) and removing 223,000 pounds of hazardous vapors from the burial...

  19. Illinois: Ozinga Concrete Runs on Natural Gas and Opens Private Station

    Broader source: Energy.gov [DOE]

    The trucks are part of a much larger Recovery Act project, which is expected to reduce 3.1 million GGE/year and 8,429 pounds of carbon dioxide per year.

  20. Results from the Plug-and-Play Workshop

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... techniques could be a solution Structure * 5 kW system weigh 1200 pounds spread over the roof * Water penetration into the roof is a big concern when holes are drilled to install ...

  1. Energy Efficiency Report--Glossary

    Gasoline and Diesel Fuel Update (EIA)

    Thermal Unit (Btu): The quantity of heat needed to raise the temperature of 1 pound of water by 1 degree Fahrenheit at or near 39.2 degrees Fahrenheit. Census Region: A geographic...

  2. Microsoft Word - LL-ULS reclamation.doc

    Energy Savers [EERE]

    1,000 pounds per acre of Granular Humate is recommended for harsh sites. At one site, cattle were used to amend poor soils. After hand-broadcasting seed, cattle were brought onto...

  3. Jr., Process Development Branch Construction Division SUBJECT...

    Office of Legacy Management (LM)

    raffinate with an inlet air temperature of 920 - 99poF (equivalent to about 7 pounds per minute). The feed temperature ye about 1300F. The outlet air temperature wae 420 - ...

  4. 23 V.S.A. Section 1392 Gross Weight Limits on Highways | Open...

    Open Energy Info (EERE)

    Section 1392 Gross Weight Limits on HighwaysLegal Abstract Statute establishes the motor vehicle weight, load size, not to exceed 80,000 pounds without a permit. Published NA...

  5. Leak Detection/Fugitive Emissions Monitoring and Advanced Sensors, Controls, Models and Platforms Panel

    Energy Savers [EERE]

    and Methane Emissions Mitigation Workshop Leak Detection/Fugitive Emissions Monitoring and Advanced Sensors, Controls, Models and Platforms Panel November 12, 2014 POUND FOR POUND METHANE TRAPS 84X MORE HEAT OVER 20 YEARS CO2 CH4 Methane is Money $1,800,000,000 Current technologies - economic and effective * Economic cost benefit analysis * Industry input included * Main finding: Cut emissions 40% at $0.01/McF reduced * OGI provides reliable and proven means of detecting leaks * EPA White Paper

  6. OTS NOTF

    Office of Legacy Management (LM)

    NOTF DATE: December 18, 1990 TO: Alexander Williams, FROM:~ Dan Stou d- SUBJECT: Additional Considered Sites During historical searches I have identified several potential considered sites. .Two historical documents referencing three sites are attached and highlighted. The first attachment refers ,to'a four pound uranium rod shipped to the Catalytic Company (the Fernald construction contractor). It also notes that 100 pounds of uranium oxide was shipped to the,Milwaukee airport for Fred Stroke

  7. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    b. Uranium purchased by owners and operators of U.S. civilian nuclear power reactors ranked by price and distributed by purchaser, 2012-14 deliveries thousand pounds U3O8 equivalent; dollars per pound U3O8 equivalent Deliveries in 2012 Deliveries in 2013 Deliveries in 2014 Distribution of purchasers Number of purchasers Quantity with reported price Weighted-average price Number of purchasers Quantity with reported price Weighted-average price Number of purchasers Quantity with reported price

  8. 2015 Domestic Uranium Production Report

    U.S. Energy Information Administration (EIA) Indexed Site

    Domestic Uranium Production Report 2015 Domestic Uranium Production Report Release Date: May 5, 2016 Next Release Date: May 2017 Table 9. Summary production statistics of the U.S. uranium industry, 1993-2015 Exploration and Development Surface Exploration and Development Drilling Mine Production of Uranium Uranium Concentrate Production Uranium Concentrate Shipments Employment Year Drilling (million feet) Expenditures 1 (million dollars) (million pounds U 3 O 8 ) (million pounds U 3 O 8 )

  9. 2015 Domestic Uranium Production Report

    U.S. Energy Information Administration (EIA) Indexed Site

    9. Summary production statistics of the U.S. uranium industry, 1993-2015" ,"Exploration and Development Surface ","Exploration and Development Drilling","Mine Production of Uranium ","Uranium Concentrate Production ","Uranium Concentrate Shipments ","Employment " "Year","Drilling (million feet)"," Expenditures 1 (million dollars)","(million pounds U3O8)","(million pounds

  10. Advanced Microturbine Systems

    SciTech Connect (OSTI)

    Rosfjord, T; Tredway, W; Chen, A; Mulugeta, J; Bhatia, T

    2008-12-31

    In July 2000, the United Technologies Research Center (UTRC) was one of five recipients of a US Department of Energy contract under the Advanced Microturbine System (AMS) program managed by the Office of Distributed Energy (DE). The AMS program resulted from several government-industry workshops that recognized that microturbine systems could play an important role in improving customer choice and value for electrical power. That is, the group believed that electrical power could be delivered to customers more efficiently and reliably than the grid if an effective distributed energy strategy was followed. Further, the production of this distributed power would be accomplished with less undesirable pollutants of nitric oxides (NOx) unburned hydrocarbons (UHC), and carbon monoxide (CO). In 2000, the electrical grid delivered energy to US customers at a national average of approximately 32% efficiency. This value reflects a wide range of powerplants, but is dominated by older, coal burning stations that provide approximately 50% of US electrical power. The grid efficiency is also affected by transmission and distribution (T&D) line losses that can be significant during peak power usage. In some locations this loss is estimated to be 15%. Load pockets can also be so constrained that sufficient power cannot be transmitted without requiring the installation of new wires. New T&D can be very expensive and challenging as it is often required in populated regions that do not want above ground wires. While historically grid reliability has satisfied most customers, increasing electronic transactions and the computer-controlled processes of the 'digital economy' demand higher reliability. For them, power outages can be very costly because of transaction, work-in-progress, or perishable commodity losses. Powerplants that produce the grid electrical power emit significant levels of undesirable NOx, UHC, and CO pollutants. The level of emission is quoted as either a technology metric or a system-output metric. A common form for the technology metric is in the units of PPM {at} 15% O2. In this case the metric reflects the molar fraction of the pollutant in the powerplant exhaust when corrected to a standard exhaust condition as containing 15% (molar) oxygen, assuring that the PPM concentrations are not altered by subsequent air addition or dilution. Since fuel combustion consumes oxygen, the output oxygen reference is equivalent to a fuel input reference. Hence, this technology metric reflects the moles of pollutant per mole of fuel input, but not the useful output of the powerplant-i.e. the power. The system-output metric does embrace the useful output and is often termed an output-based metric. A common form for the output-based metric is in the units of lb/MWh. This is a system metric relating the pounds of pollutant to output energy (e.g., MWh) of the powerplant.

  11. Development of Technologies for a High Efficiency, Very Low Emission, Diesel Engine for Light Trucks and Sport Utility Vehicles

    SciTech Connect (OSTI)

    Stang, John H.

    1997-12-01

    Cummins Inc., in partnership with the Department of Energy, has developed technology for a new highly efficient, very low emission, diesel engine for light trucks and sport utility vehicles. This work began in April 1997, and started with very aggressive goals for vehicles in the 5751 to 8500 pound GCW weight class. The primary program goals were as follows: (1) EMISSIONS NOx = 0.50 g/mi PM = 0.05 g/mi CO = 2.8 g/mi NMHC = 0.07 g/mi California decided to issue new and even tougher LEV II light truck regulations late in 1999. EPA also issued its lower Tier 2 regulations late in 2000. The net result was that the targets for this diesel engine project were lowered, and these goals were eventually modified by the publication of Federal Tier 2 emission standards early in 2000 to the following: NOx = 0.07 g/mi PM = 0.01 g/mi (2) FUEL ECONOMY The fuel economy goal was 50 percent MPG improvement (combined city/highway) over the 1997 gasoline powered light truck or sport utility vehicle in the vehicle class for which this diesel engine is being designed to replace. The goal for fuel economy remained at 50 percent MPG improvement, even with the emissions goal revisions. (3) COOPERATIVE DEVELOPMENT Regular design reviews of the engine program will be conducted with a vehicle manufacturer to insure that the concepts and design specifics are commercially feasible. (DaimlerChrysler has provided Cummins with this design review input.) Cummins has essentially completed a demonstration of proof-of-principle for a diesel engine platform using advanced combustion and fuel system technologies. Cummins reported very early progress in this project, evidence that new diesel engine technology had been developed that demonstrated the feasibility of the above emissions goals. Emissions levels of NOx = 0.4 g/mi and PM = 0.06 g/mi were demonstrated for a 5250 lb. test weight vehicle with passive aftertreatment only. These results were achieved using the full chassis dynamometer FTP-75 test procedure that allowed compliance with the Tier 2 Interim Bin 10 Standards and would apply to vehicles in MY2004 through MY2007 timeframe. In further technology development with active aftertreatment management, Cummins has been able to report that the emissions goals for the Tier 2 Bin 5 standards were met on an engine running the full FTP-75 test procedure. The fuel economy on the chassis tests was measured at over 59 percent MPG improvement over the gasoline engines that are offered in typical SUVs and light trucks. The above demonstration used only in-cylinder fueling for management of the aftertreatment system.

  12. Development of Technologies for a High Efficiency, Very Low Emission, Diesel Engine for Light Trucks and Sport Utility Vehicles

    SciTech Connect (OSTI)

    Stang, John H.

    2005-12-19

    Cummins Inc., in partnership with the Department of Energy, has developed technology for a new highly efficient, very low emission, diesel engine for light trucks and sport utility vehicles. This work began in April 1997, and started with very aggressive goals for vehicles in the 5751 to 8500 pound GCW weight class. The primary program goals were as follows: (1) EMISSIONS -- NOx = 0.50 g/mi; PM = 0.05 g/mi; CO = 2.8 g/mi; and NMHC = 0.07 g/mi. California decided to issue new and even tougher LEV II light truck regulations late in 1999. EPA also issued its lower Tier 2 regulations late in 2000. The net result was that the targets for this diesel engine project were lowered, and these goals were eventually modified by the publication of Federal Tier 2 emission standards early in 2000 to the following: NOx = 0.07 g/mi; and PM = 0.01 g/mi. (2) FUEL ECONOMY -- The fuel economy goal was 50 percent MPG improvement (combined city/highway) over the 1997 gasoline powered light truck or sport utility vehicle in the vehicle class for which this diesel engine is being designed to replace. The goal for fuel economy remained at 50 percent MPG improvement, even with the emissions goal revisions. (3) COOPERATIVE DEVELOPMENT -- Regular design reviews of the engine program will be conducted with a vehicle manufacturer to insure that the concepts and design specifics are commercially feasible. (DaimlerChrysler has provided Cummins with this design review input.) Cummins has essentially completed a demonstration of proof-of-principle for a diesel engine platform using advanced combustion and fuel system technologies. Cummins reported very early progress in this project, evidence that new diesel engine technology had been developed that demonstrated the feasibility of the above emissions goals. Emissions levels of NOx = 0.4 g/mi and PM = 0.06 g/mi were demonstrated for a 5250 lb. test weight vehicle with passive aftertreatment only. These results were achieved using the full chassis dynamometer FTP-75 test procedure that allowed compliance with the Tier 2 Interim Bin 10 Standards and would apply to vehicles in MY2004 through MY2007 timeframe. In further technology development with active aftertreatment management, Cummins has been able to report that the emissions goals for the Tier 2 Bin 5 standards were met on an engine running the full FTP-75 test procedure. The fuel economy on the chassis tests was measured at over 59 percent MPG improvement over the gasoline engines that are offered in typical SUVs and light trucks. The above demonstration used only in-cylinder fueling for management of the aftertreatment system.

  13. Development of Technologies for a High Efficiency, Very Low Emission, Diesel Engine for Light Trucks and Sport Utility Vehicles

    SciTech Connect (OSTI)

    John H. Stang

    2005-12-31

    Cummins Inc., in partnership with the Department of Energy, has developed technology for a new highly efficient, very low emission, diesel engine for light trucks and sport utility vehicles. This work began in April 1997, and started with very aggressive goals for vehicles in the 5751 to 8500 pound GCW weight class. The primary program goals were as follows: (1) EMISSIONS--NO{sub x} = 0.50 g/mi; PM = 0.05 g/mi; CO = 2.8 g/mi; and NMHC = 0.07 g/mi. California decided to issue new and even tougher LEV II light truck regulations late in 1999. EPA also issued its lower Tier 2 regulations late in 2000. The net result was that the targets for this diesel engine project were lowered, and these goals were eventually modified by the publication of Federal Tier 2 emission standards early in 2000 to the following: NO{sub x} = 0.07 g/mi; and PM = 0.01 g/mi. (2) FUEL ECONOMY--The fuel economy goal was 50 percent MPG improvement (combined city/highway) over the 1997 gasoline powered light truck or sport utility vehicle in the vehicle class for which this diesel engine is being designed to replace. The goal for fuel economy remained at 50 percent MPG improvement, even with the emissions goal revisions. (3) COOPERATIVE DEVELOPMENT--Regular design reviews of the engine program will be conducted with a vehicle manufacturer to insure that the concepts and design specifics are commercially feasible. (DaimlerChrysler has provided Cummins with this design review input.) Cummins has essentially completed a demonstration of proof-of-principle for a diesel engine platform using advanced combustion and fuel system technologies. Cummins reported very early progress in this project, evidence that new diesel engine technology had been developed that demonstrated the feasibility of the above emissions goals. Emissions levels of NOx = 0.4 g/mi and PM = 0.06 g/mi were demonstrated for a 5250 lb. test weight vehicle with passive aftertreatment only. These results were achieved using the full chassis dynamometer FTP-75 test procedure that allowed compliance with the Tier 2 Interim Bin 10 Standards and would apply to vehicles in MY2004 through MY2007 timeframe. In further technology development with active aftertreatment management, Cummins has been able to report that the emissions goals for the Tier 2 Bin 5 standards were met on an engine running the full FTP-75 test procedure. The fuel economy on the chassis tests was measured at over 59 percent MPG improvement over the gasoline engines that are offered in typical SUVs and light trucks. The above demonstration used only in-cylinder fueling for management of the aftertreatment system.

  14. Fermilab Today

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2,000-lb gizmo that will replace the telescope's current sensors in order to learn about dark energy, a phenomenon that has until now remained well, in the dark. Read more Tip of...

  15. The development of coal-based technologies for Department of Defense facilities. Volume 2, Appendices. Semiannual technical progress report, September 28, 1994--March 27, 1995

    SciTech Connect (OSTI)

    Miller, B.G.; Bartley, D.A.; Hatcher, P.

    1996-10-15

    This semiannual progress report contains the following appendices: description of the 1,000 lb steam/h watertube research boiler; the Pennsylvania CGE model; Phase II, subtask 3.9 coal market analysis; the CGE model; and sector definition.

  16. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Property Tax Exemption for Renewable Energy Generation Facilities Note: In May 2015, L.B. 424 was enacted, which adds solar, biomass, and landfill gas tangible personal property to...

  17. Chlorofluorocarbon leak detection technology

    SciTech Connect (OSTI)

    Munday, E.B.

    1990-12-01

    There are about 590 large coolant systems located at the Portsmouth Gaseous Diffusion Plant (PORTS) and the Paducah Gaseous Diffusion Plant (PGDP) leaking nearly 800,000 lb of R-114 refrigerant annually (1989 estimate). A program is now under way to reduce the leakage to 325,000 lb/year -- an average loss of 551 lb/year (0.063 lb/h) per coolant system, some of which are as large as 800 ft. This report investigates leak detection technologies that can be used to locate leaks in the coolant systems. Included are descriptions, minimum leak detection rate levels, advantages, disadvantages, and vendor information on the following technologies: bubbling solutions; colorimetric leak testing; dyes; halogen leak detectors (coronea discharge detectors; halide torch detectors, and heated anode detectors); laser imaging; mass spectroscopy; organic vapor analyzers; odorants; pressure decay methods; solid-state electrolytic-cell gas sensors; thermal conductivity leak detectors; and ultrasonic leak detectors.

  18. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    seal-out of waste material from upper section of GB HA-9A. * Small package of filter media waste (1lb), removed from Glove Box via 11" transfer sleeve. * During umbilical...

  19. revised MS A5-ROR text+figures

    Office of Scientific and Technical Information (OSTI)

    ... Eur J Neurosci. 1997;9:2687-2701. 21. Hamilton BA, Frankel WN, Kerrebrock AW, Hawkins TL, FitzHugh W, Kusumi K, Russell LB, Mueller KL, van Berkel V, Birren BW, Kruglyak L, Lander ...

  20. TTW 5-11-06

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... exhaust drifts of Panel 2. The tables were moved next to concrete mixers to lift mortar sacks waist-high, eliminating the need for workers to reach or bend for the 60 lb. sacks. ...

  1. Fiber Reinforced Polymer Composite Manufacturing RFI, DE-FOA...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Cost of Carbon fiber 5-7lb >50 reduction relative to steel >100,000 unitslineyr < 2 minunit >60% relative to current niche vehicle production >40% vs steel 2-3 cost premium...

  2. ITP Chemicals: Chemical Bandwidth Study - Energy Analysis: A...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... silicalite catalyst (ZSM-5) with a silica binder Chlorine Electrolysis of sodium ...lb Total Exergy Loss Btulb % Feed AirRecycle Air Mixer 0 0 0 19 19 0.56 Feed Air ...

  3. Property Tax Exemption for Renewable Energy Generation Facilities

    Broader source: Energy.gov [DOE]

    Note: In May 2015, L.B. 424 was enacted, which adds solar, biomass, and landfill gas tangible personal property to this exemption effective January 1, 2016. This exemption is only applicable for...

  4. STANDARD FORM NO. 64

    Office of Legacy Management (LM)

    1 ' . ;;-.' ,. i * , .: .I "< ;,. ". ' ,, ,,::? I: ' . ' . p.zf;' b . .., .' cj+zh Ggi s-f?% pm> IWS q&&A 1 dlkhcaA3 3 i..JK Lb-tAd- "::' . i , L ?-- .' . ' .' ' :., .' ' ...

  5. Papers Published April 1, 1996 - March 31, 1997

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    E. Norbeck, D.E. Russ, M. Steiner, B. Stone, A.M. Vander Molen, G.D. Westfall, L.B. Yang, and S.J. Yennello Phys. Rev. Lett. 76, 1026 (1997) Entrance channel mass asymmetry...

  6. Downspeeding a Heavy-Duty Pickup Truck with a Combined Supercharger...

    Broader source: Energy.gov (indexed) [DOE]

    6.6L diesel engine and a ton pickup truck with 8500 lb. curb weight, and validation ... Design & Development of e-TurboTM for SUV and Light Truck Applications SuperTurbocharger

  7. ARM - Publications: Science Team Meeting Documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Project in the Southern Great Plains Torn, M.S.(a), Berry, J.(b), Riley, W.J.(a), Fischer, M.L.(a), Billesbach, B.(c), Helliker, B.(b), and Giles, L.(b), Lawrence Berkeley...

  8. Property List for RO Code '37', EDI

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    POWERED COU ALLEGHENY CLARK GPX25E GPX230E0579231 17,499.00 902 000 C5583 FORKLIFT PROPANE CATERPILLAR GP20 5AM08330 16,875.00 6 None 0156551 FORKLIFT, 3000 LB YALE L314...

  9. Principle Energy Limited | Open Energy Information

    Open Energy Info (EERE)

    Principle Energy Limited Place: Isle of Man, United Kingdom Zip: 1M1 1LB Sector: Renewable Energy Product: A UK-based renewable energy company focusing on bioethanol projects in...

  10. KSK Power Ventur Plc | Open Energy Information

    Open Energy Info (EERE)

    Ventur Plc Jump to: navigation, search Name: KSK Power Ventur Plc Place: Isle of Man, United Kingdom Zip: IM1 1LB Sector: Renewable Energy Product: Isle of Man-based power project...

  11. October 2005 - March 2006 Power Rates (rates/previous)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    above provides a table of monthly Slice, PF, RL, and IP rates with a 30.56% non-Slice LB + FB + SN CRAC adjustment for each month of the six-month rate period. The table below...

  12. April - September 2002 Power Rates (rates/previous)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    above provides a table of monthly Slice, PF, RL, and IP rates with a 40.77% non-Slice LB CRAC adjustment for each month of the six-month rate period. The table below is simply a...

  13. October 2004 - March 2005 Power Rates (rates/previous)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The PDF documents above provide tables of monthly Slice, PF, RL, and IP rates with the LB + FB + SN CRAC adjustments for each month of the rate period. The table below is simply...

  14. April - September 2005 Power Rates (rates/previous)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    above provides a table of monthly Slice, PF, RL, and IP rates with a 36.93% non-Slice LB + FB + SN CRAC adjustment for each month of the six-month rate period. The table below...

  15. PBL FY 2002 Third Quarter Review Forecast of Generation Accumulated...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Revenue Basis. The FB CRAC Revenue Basis is the total generation revenue (not including LB CRAC) for the loads subject to FB CRAC plus Slice loads, for the year in which the FB...

  16. October 2003 - March 2004 Power Rates (rates/previous)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    above provides a table of monthly Slice, PF, RL, and IP rates with a 43.66% non-Slice LB + FB + SN CRAC adjustment for each month of the rate period. The table below is simply a...

  17. October 2002 - March 2003 Power Rates (rates/previous)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    above provides a table of monthly Slice, PF, RL, and IP rates with a 43.91% non-Slice LB + FB CRAC adjustment for each month of the six-month rate period. The table below is...

  18. October 2001 - March 2002 Power Rates (rates/previous)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    above provides a table of monthly Slice, PF, RL, and IP rates with a 46% non-Slice LB CRAC adjustment for each month of the six-month rate period. The table below is simply a...

  19. October 2001 - September 2006 Wholesale Power Rates (rates/previous...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2002 - September 2002 (CRAC 2 period) October 2001 - March 2002 (CRAC 1 period) Final LB CRAC True-Ups for FY 2006 True-Up for CRAC 9 Period: June 14, 2006 Workshop True-Up for...

  20. April - September 2003 Power Rates (rates/previous)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    above provides a table of monthly Slice, PF, RL, and IP rates with a 49.50% non-Slice LB + FB CRAC adjustment for each month of the six-month rate period. The table below is...

  1. April - September 2004 Power Rates (rates/previous)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    above provides a table of monthly Slice, PF, RL, and IP rates with a 47.00% non-Slice LB + FB + SN CRAC adjustment for each month of the six-month rate period. The table below...

  2. eGSE America Electric Baggage Tow Tractor (EBTT) Technical Specificati...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... battery, such as the average amp-hour draw, any non-gassing requirements, available ... at 6.2 mph (10 kph) with a 1,500 lb draw bar. 3.2.1.2 Means of restraining the ...

  3. StPln-5;.

    Office of Legacy Management (LM)

    ... sltsafiJ GILiasr and rf@s,et Suttan, Stcrelr, & Stsrrlo, i+., &U.as, yoy ,htireshd i.n this work end was Texas, willfng tu unde ) in a PQU propcrtieo. l&b d-1 fluaridss or ' . ...

  4. Department of Energy Office of Nuclear Safety and Environmental Policy Technical Position NSEP-TP-2007- 1, Technical Position on the Requirement in DOE 0 420.1B to Use National Consensus Industry Standards and the Model Building CodesTechnical Position NS

    Broader source: Energy.gov [DOE]

    All new construction required to follow the provisions of Department of Energy(DOE) Order 420. lB, Facility Safety, must comply with national consensus industrystandards and the model building...

  5. FIlea

    Office of Legacy Management (LM)

    from SR flat plate progrmn, and'the can in question mlcht have cmtafned nom low density natcrl&emn thoqh the shipplq olip Indicated "bar stock". lb, Grleb eoid that on or...

  6. Lebanon: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Lebanon Population 4,965,914 GDP 44,967,000,000 Energy Consumption 0.20 Quadrillion Btu 2-letter ISO code LB 3-letter ISO code LBN Numeric ISO...

  7. Sales and Use Tax Exemption for Community Renewable Energy Projects

    Broader source: Energy.gov [DOE]

    Note: Enacted March 2015, L.B. 412 created the following requirement: "To the extent feasible, a C-BED project developer shall provide, in writing, notice of incentives pursuant to the Rural...

  8. Gem BioFuels | Open Energy Information

    Open Energy Info (EERE)

    BioFuels Jump to: navigation, search Name: Gem BioFuels Place: Douglas, Isle of Man, United Kingdom Zip: IM1 4LB Product: Ilse of Man-based biodiesel feedstock developer with...

  9. ARM - Publications: Science Team Meeting Documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    from GOES Heck, P.W.(a), Minnis, P.(b), Khaiyer, M.M.(a), Smith, Jr., W.L.(b), Young, D.F.(b), and Nguyen, L.(b), Analytical Services & Materials, Inc. (a), NASA Langley...

  10. Categorical ExcluSIon Determination Forn1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation I8lB 1.3 * Routine maintenance and custodial services DB 1,4 * Air conditioning installation for existing equipment DB 1.5 Cooling water system...

  11. MHK Technologies/Microturbine River In Stream | Open Energy Informatio...

    Open Energy Info (EERE)

    HDPE blades are the only moving parts in the water.This gives the turbine high resistance to silty or salty water. Blades designed to survive impact of 1500 lb object. HDPE...

  12. Development of Authorized Limits for Portsmouth Oil Inventory...

    Office of Environmental Management (EM)

    - Based on current mixed waste broad-spectrum treatment contract pricing, commercial ... per year): 4 - 11lb * Current broad-spectrum treatment cost for non-PCB mixed waste: ...

  13. ARM-95-002

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... lb Static Hook Load Derrick, Drawworks,3 Cranes, B.O.P . ... Maximum Wave 216 .6 m High, Maximum Wind (3 sec gust) 57 ... machinery, and the methanol injection system and storage tanks . ...

  14. Model WC-18000

    Office of Legacy Management (LM)

    Model WC-18000 by NuPac . VOLUME REDUCTION means ravings in transportation and burial. l AIR FILTRATION SYSTEM l 18000 lb. COMPACTION 0 ELECTRO-MECHANICAL OPERATION l OVER 20 UNITS ...

  15. Cyclone Boiler Field Testing of Advanced Layered NOx Control Technology in Sioux Unit 1

    SciTech Connect (OSTI)

    Marc A. Cremer; Bradley R. Adams

    2006-06-30

    A four week testing program was completed during this project to assess the ability of the combination of deep staging, Rich Reagent Injection (RRI), and Selective Non-Catalytic Reduction (SNCR) to reduce NOx emissions below 0.15 lb/MBtu in a cyclone fired boiler. The host site for the tests was AmerenUE's Sioux Unit 1, a 500 MW cyclone fired boiler located near St. Louis, MO. Reaction Engineering International (REI) led the project team including AmerenUE, FuelTech Inc., and the Electric Power Research Institute (EPRI). This layered approach to NOx reduction is termed the Advanced Layered Technology Approach (ALTA). Installed RRI and SNCR port locations were guided by computational fluid dynamics (CFD) based modeling conducted by REI. During the parametric testing, NOx emissions of 0.12 lb/MBtu were achieved consistently from overfire air (OFA)-only baseline NOx emissions of 0.25 lb/MBtu or less, when firing the typical 80/20 fuel blend of Powder River Basin (PRB) and Illinois No.6 coals. From OFA-only baseline levels of 0.20 lb/MBtu, NOx emissions of 0.12 lb/MBtu were also achieved, but at significantly reduced urea flow rates. Under the deeply staged conditions that were tested, RRI performance was observed to degrade as higher blends of Illinois No.6 were used. NOx emissions achieved with ALTA while firing a 60/40 blend were approximately 0.15 lb/MBtu. NOx emissions while firing 100% Illinois No.6 were approximately 0.165 lb/MBtu. Based on the performance results of these tests, economics analyses of the application of ALTA to a nominal 500 MW cyclone unit show that the levelized cost to achieve 0.15 lb/MBtu is well below 75% of the cost of a state of the art SCR.

  16. Uranium Fate and Transport Modeling, Guterl Specialty Steel Site, New York - 13545

    SciTech Connect (OSTI)

    Frederick, Bill; Tandon, Vikas

    2013-07-01

    The Former Guterl Specialty Steel Corporation Site (Guterl Site) is located 32 kilometers (20 miles) northeast of Buffalo, New York, in Lockport, Niagara County, New York. Between 1948 and 1952, up to 15,875 metric tons (35 million pounds) of natural uranium metal (U) were processed at the former Guterl Specialty Steel Corporation site in Lockport, New York. The resulting dust, thermal scale, mill shavings and associated land disposal contaminated both the facility and on-site soils. Uranium subsequently impacted groundwater and a fully developed plume exists below the site. Uranium transport from the site involves legacy on-site pickling fluid handling, the leaching of uranium from soil to groundwater, and the groundwater transport of dissolved uranium to the Erie Canal. Groundwater fate and transport modeling was performed to assess the transfer of dissolved uranium from the contaminated soils and buildings to groundwater and subsequently to the nearby Erie Canal. The modeling provides a tool to determine if the uranium contamination could potentially affect human receptors in the vicinity of the site. Groundwater underlying the site and in the surrounding area generally flows southeasterly towards the Erie Canal; locally, groundwater is not used as a drinking water resource. The risk to human health was evaluated outside the Guterl Site boundary from the possibility of impacted groundwater discharging to and mixing with the Erie Canal waters. This condition was evaluated because canal water is infrequently used as an emergency water supply for the City of Lockport via an intake located approximately 122 meters (m) (400 feet [ft]) southeast of the Guterl Site. Modeling was performed to assess whether mixing of groundwater with surface water in the Erie Canal could result in levels of uranium exceeding the U.S. Environmental Protection Agency (USEPA) established drinking water standard for total uranium; the Maximum Concentration Limit (MCL). Geotechnical test data indicate that the major portion of uranium in the soil will adsorb or remain bound to soil, yet leaching to groundwater appears as an on-site source. Soil leaching was modeled using low adsorption factors to replicate worst-case conditions where the uranium leaches to the groundwater. Results indicate that even after several decades, which is the period of time since uranium was processed at the Guterl Site, leaching from soil does not fully account for the currently observed levels of groundwater contamination. Modeling results suggest that there were historic releases of uranium from processing operations directly to the shallow fractured rock and possibly other geochemical conditions that have produced the current groundwater contamination. Groundwater data collected at the site between 1997 and 2011 do not indicate an increasing level of uranium in the main plume, thus the uranium adsorbed to the soil is in equilibrium with the groundwater geochemistry and transport conditions. Consequently, increases in the overall plume concentration or size are not expected. Groundwater flowing through fractures under the Guterl Site transports dissolved uranium from the site to the Erie Canal, where the groundwater has been observed to seep from the northern canal wall at some locations. The seeps discharge uranium at concentrations near or below the MCL to the Erie Canal. Conservative mixing calculations were performed using two worst-case assumptions: 1) the seeps were calculated as contiguous discharges from the Erie Canal wall and 2) the uranium concentration of the seepage is 274 micrograms per liter (?g/L) of uranium, which is the highest on-site uranium concentration in groundwater and nearly ten-fold the actual seep concentrations. The results indicate that uranium concentrations in the seep water would have to be more than 200 times greater than the highest observed on-site groundwater concentrations (or nearly 55,000 ?g/L) to potentially exceed the drinking water standard (the MCL) for total uranium in the Erie Canal. (authors)

  17. Predictors of Grade 3 or Higher Late Bowel Toxicity in Patients Undergoing Pelvic Radiation for Cervical Cancer: Results From a Prospective Study

    SciTech Connect (OSTI)

    Chopra, Supriya; Dora, Tapas; Chinnachamy, Anand N.; Thomas, Biji; Kannan, Sadhna; Engineer, Reena; Mahantshetty, Umesh; Phurailatpam, Reena; Paul, Siji N.; Shrivastava, Shyam Kishore

    2014-03-01

    Purpose: The present study investigates relationship between dosevolume parameters and severe bowel toxicity after postoperative radiation treatment (PORT) for cervical cancer. Methods and Materials: From June 2010 to December 2012, a total of 71 patients undergoing PORT were included. Small bowel (SB) and large bowel (LB) loops were contoured 2cm above the target volume. The volume of SB and LB that received 15Gy, 30Gy, and 40Gy was calculated (V15 SB, V15 LB, V30 SB, V30 LB, V40 SB, V 40 LB). On follow-up, bowel toxicity was scored using Common Terminology Criteria for Adverse Events (CTCAE), version 3.0. A reciever operating characteristic (ROC) curve identified volume thresholds that predicted for grade 3 or higher toxicity with highest specificity. All data was dichotomized across these identified cut-off values. Univariate and multivariate analysis was performed using SPSS, version15. Results: The median patient age was 47years (range, 35-65years). Of the 71 patients, 46 received image-guided intensity modulated radiation therapy, and 25 received conformal radiation (50Gy in 25 fractions for 5weeks). Overall, 63 of 71 patients received concurrent chemotherapy. On a median follow-up of 18months (range, 8-29months), grade 2 or higher bowel toxicity was seen in 22 of 71 patients (30.9%) and grade 3 or higher bowel toxicity was seen in 9 patients (12.6%). On univariate analysis, V15 SB <275 cc (P=.01), V30 SB <190 cc (P=.02), V40 SB <150 cc (P=.01), and V15 LB <250 cc (P=.03), and V40 LB <90 cc (P=.04) predicted for absence of grade 3 or higher toxicity. No other patient- or treatment-related factors were statistically significant. On multivariate analysis, only V15 SB (P=.002) and V15 LB (P=.03) were statistically significant. Conclusions: V 15Gy SB and LB are independent predictors of late grade 3 or higher toxicity. Restricting V15 SB and V15 LB to <275 cc and <250 cc can reduce grade 3 or higher toxicity to less than 5%.

  18. Fukushima Nuclear Crisis Recovery: A Modular Water Treatment System Deployed in Seven Weeks - 12489

    SciTech Connect (OSTI)

    Denton, Mark S.; Mertz, Joshua L.; Bostick, William D.

    2012-07-01

    On March 11, 2011, the magnitude 9.0 Great East Japan earthquake, Tohoku, hit off the Fukushima coast of Japan. This was one of the most powerful earthquakes in recorded history and the most powerful one known to have hit Japan. The ensuing tsunami devastated a huge area resulting in some 25,000 persons confirmed dead or missing. The perfect storm was complete when the tsunami then found the four reactor, Fukushima-Daiichi Nuclear Station directly in its destructive path. While recovery systems admirably survived the powerful earthquake, the seawater from the tsunami knocked the emergency cooling systems out and did extensive damage to the plant and site. Subsequent hydrogen generation caused explosions which extended this damage to a new level and further flooded the buildings with highly contaminated water. Some 2 million people were evacuated from a fifty mile radius of the area and evaluation and cleanup began. Teams were assembled in Tokyo the first week of April to lay out potential plans for the immediate treatment of some 63 million gallons (a number which later exceeded 110 million gallons) of highly contaminated water to avoid overflow from the buildings as well as supply the desperately needed clean cooling water for the reactors. A system had to be deployed with a very brief cold shake down and hot startup before the rainy season started in early June. Joined by team members Toshiba (oil removal system), AREVA (chemical precipitation system) and Hitachi-GE (RO system), Kurion (cesium removal system following the oil separator) proposed, designed, fabricated, delivered and started up a one of a kind treatment skid and over 100 metric tons of specially engineered and modified Ion Specific Media (ISM) customized for this very challenging seawater/oil application, all in seven weeks. After a very short cold shake down, the system went into operation on June 17, 2011 on actual waste waters far exceeding 1 million Bq/mL in cesium and many other isotopes. One must remember that, in addition to attempting to do isotope removal in the competition of seawater (as high as 18,000 ppm sodium due to concentration), some 350,000 gallons of turbine oil was dispersed into the flooded buildings as well. The proposed system consisted of a 4 guard vessel skid for the oil and debris, 4 skids containing 16 cesium towers in a lead-lag layout with removable vessels (sent to an interim storage facility), and a 4 polishing vessel skid for iodine removal and trace cesium levels. At a flow rate of at least 220 gallons per minute, the system has routinely removed over 99% of the cesium, the main component of the activity, since going on line. To date, some 50% of the original activity has been removed and stabilized and cold shutdown of the plant was announced on December 10, 2011. In March and April alone, 10 cubic feet of Engineered Herschelite was shipped to Seabrook Nuclear Power Plant, NPP, to support the April 1, 2011 outage cleanup; 400 cubic feet was shipped to Oak Ridge National Laboratory (ORNL) for strontium (Sr-90) ground water remediation; and 6000 cubic feet (100 metric tons, MT, or 220,400 pounds) was readied for the Fukushima Nuclear Power Station with an additional 100 MT on standby for replacement vessels. This experience and accelerated media production in the U.S. bore direct application to what was to soon be used in Fukushima. How such a sophisticated and totally unique system and huge amount of media could be deployable in such a challenging and changing matrix, and in only seven weeks, is outlined in this paper as well as the system and operation itself. As demonstrated herein, all ten major steps leading up to the readiness and acceptance of a modular emergency technology recovery system were met and in a very short period of time, thus utilizing three decades of experience to produce and deliver such a system literally in seven weeks: - EPRI - U.S. Testing and Experience Leading to Introduction to EPRI - Japan and Subsequently TEPCO Emergency Meetings - Three Mile Island (TMI) Media and Vitrification Experience by PNNL - Commercial Nuclear Power Plant Media Experience (including long term Cs removal) - DOE Low Active Waste (LAW) and High Level Waste (HLW) in High Salt and pH Conditions Media and Vitrification Experience - National Laboratory (e.g. Oak Ridge National Laboratory, ORNL) Ground Water Media Experience - Gulf Oil Spill Media Experience in Seawater - All Media Had to be Fully Tested at High Rad Levels in Seawater and Oil Before Arriving in Japan - Final Waste Form and Disposal Experience (e.g., vitrification) - 100 Metric Tons (6000 cubic feet or 220,400 pounds) of Media had to be Immediately Available with the same amount in production as replacement media. [To date, for 2011, 400 MT of media have been prepared for Japan alone.] - Remote Operation, Modular Water Treatment Equipment Design and Fabrication in both Commercial NPP and DOE Canyon Operations. (authors)

  19. May market review. [Spot market prices for uranium (1993)

    SciTech Connect (OSTI)

    Not Available

    1993-06-01

    Seven uranium transactions totalling nearly three million pounds equivalent U3O8 were reported during May, but only two, totalling less than 200 thousand pounds equivalent U3O8, involved concentrates. As no discretionary buying occurred during the month, and as near-term supply and demand were in relative balance, prices were steady, while both buyers and sellers appeared to be awaiting some new market development to signal the direction of future spot-market prices. The May 31, 1993, Exchange Value and the Restricted American market Penalty (RAMP) for concentrates were both unchanged at $7.10, and $2.95 per pound U3O8, respectively. NUEXCO's judgement was that transactions for significant quantities of uranium concentrates that were both deliverable in and intended for consumption in the USA could have been concluded on May 31 at $10.05 per pound U3O8. Two near-term concentrate transactions were reported in which one US utility purchased less than 200 thousand pounds equivalent U3O8 from two separate sellers. These sales occurred at price levels at or near the May 31 Exchange Value plus RAMP. No long-term uranium transactions were reported during May. Consequently, the UF6 Value decreased $0.20 to $24.30 per kgU as UF6, reflecting some weakening of the UF6 market outside the USA.

  20. April market review. [Spot market prices for uranium (1993)

    SciTech Connect (OSTI)

    Not Available

    1993-05-01

    The spot market price for uranium outside the USA weakened further during April, and at month end, the NUEXCO Exchange Value had fallen $0.35, to $7.10 per pound U3O8. This is the lowest Exchange Value observed in nearly twenty years, comparable to Values recorded during the low price levels of the early 1970s. The Restricted American Market Penalty (RAMP) for concentrates increased $0.40, to $2.95 per pound U3O8. Transactions for significant quantities of uranium concentrates that are both deliverable in and intended for consumption in the USA could have been concluded on April 30 at $10.05 per pound U3O8, up $0.05 from the sum of corresponding March Values. Four near-term concentrates transactions were reported, totalling nearly 1.5 million pounds equivalent U3O8. One long-term sale was reported. The UF6 Value also declined, as increased competition among sellers led to a $0.50 decrease, to $24.50 per kgU as UF6. However, the RAMP for UF6 increased $0.65, to $5.90 per kgU as UF6, reflecting an effective US market level of $30.40 per kgU. Two near term transactions were reported totalling approximately 1.1 million pounds equivalent U3O8. In total, eight uranium transactions totalling 28 million pounds equivalent U3O8 were reported, which is about average for April market activity.

  1. Buildings Energy Data Book: 1.4 Environmental Data

    Buildings Energy Data Book [EERE]

    2 Characteristics of U.S. Construction Waste - Two to seven tons of waste (a rough average of 4 pounds of waste per square foot) are generated during the construction of a new single-family detached house. - 15 to 70 pounds of hazardous waste are generated during the construction of a detached, single-family house. Hazardous wastes include paint, caulk, roofing cement, aerosols, solvents, adhesives, oils, and greases. - Each year, U.S. builders produce between 30 and 35 million tons of

  2. NNSA Production Office tops Feds Feed Families campaign goal | Y-12

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Security Complex tops ... NNSA Production Office tops Feds Feed Families campaign goal Posted: September 16, 2013 - 9:45am Oak Ridge, Tenn. - Employees of the National Nuclear Security Administration Production Office have donated 17,348 pounds of food as part of the annual U.S. Department of Energy's "Feds Feed Families" campaign. The campaign, which ended on September 6, surpassed the goal of 17,000 pounds. "I am extremely proud and moved by the generosity of NPO

  3. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    US ITER ships 30,000 pounds of magnet system hardware to Europe US ITER ships 30,000 pounds of magnet system hardware to Europe An 800-meter length of sample toroidal field conductor is en route to La Spezia, Italy -Lynne Degitz Published June 9, 2014 The 800-meter sample toroidal field conductor was transferred to a container ship at the port of Charleston, S.C., on May 28, 2014 for its voyage to La Spezia, Italy. The 800-meter sample toroidal field conductor was transferred to a container ship

  4. Table 9.3 Uranium Overview, 1949-2011

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Uranium Overview, 1949-2011 Year Domestic Concentrate Production 1 Purchased Imports 2 Export 2 Sales Electric Plant Purchases From Domestic Suppliers Loaded Into U.S. Nuclear Reactors 3 Inventories Average Price Domestic Suppliers Electric Plants Total Purchased Imports Domestic Purchases Million Pounds Uranium Oxide Dollars 4 per Pound Uranium Oxide 1949 0.36 4.3 0.0 NA NA NA NA NA NA NA 1950 .92 5.5 .0 NA NA NA NA NA NA NA 1951 1.54 6.1 .0 NA NA NA NA NA NA NA 1952 1.74 5.7 .0 NA NA NA NA

  5. Word Pro - S4.lwp

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Uranium Reserves, 2008 By State Total Reserves 106 U.S. Energy Information Administration / Annual Energy Review 2011 1 See "Nominal Dollars" in Glossary. 2 Alaska, California, Idaho, Montana, Nebraska, Nevada, North Dakota, Oregon, South Dakota, Virginia, and Washington. Notes: * See "Uranium Oxide" in Glossary. * Data are at end of year. Source: Table 4.10. Forward-Cost Category (dollars¹ per pound) 539 1,227 $50 or Less $100 or Less 0 500 1,000 1,500 Million Pounds

  6. The greening of Y-12 | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The greening of Y-12 The greening of Y-12 Posted: September 9, 2013 - 2:48pm With more than 1,230 pollution prevention initiatives reducing some 2.07 billion pounds of waste since 1993, Y-12 sustainability programs yielded $70.7 million in cost efficiencies to the Y-12 Complex, and consequently, to taxpayers. Here are a few other Y-12 green facts: In FY 2012, Y-12 recycled more than 3 million pounds of materials off-site including routine paper, cardboard, wooden pallets, scrap metal, lamps,

  7. PPPL earns top EPA award | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PPPL earns top EPA award By Jeanne Jackson DeVoe March 14, 2013 Tweet Widget Google Plus One Share on Facebook The demolition and sale of the C-Site motor generators yielded over 4 million pounds of metal. The recycling of the metal was a big factor in PPPL winning the 2012 EPA WasteWise Program's Federal Partner of the Year. (Photo by Elle Starkman, PPPL Office of Communications ) The demolition and sale of the C-Site motor generators yielded over 4 million pounds of metal. The recycling of the

  8. PPPL earns top EPA award | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PPPL earns top EPA award By Jeanne Jackson DeVoe March 14, 2013 Tweet Widget Google Plus One Share on Facebook The demolition and sale of the C-Site motor generators yielded over 4 million pounds of metal. The recycling of the metal was a big factor in PPPL winning the 2012 EPA WasteWise Program's Federal Partner of the Year. (Photo by Elle Starkman/PPPL Office of Communications) The demolition and sale of the C-Site motor generators yielded over 4 million pounds of metal. The recycling of the

  9. Method of regulating the amount of underfire air for combustion of wood fuels in spreader-stroke boilers

    DOE Patents [OSTI]

    Tuttle, Kenneth L.

    1980-01-01

    A method of metering underfire air for increasing efficiency and reducing particulate emissions from wood-fire, spreader-stoker boilers is disclosed. A portion of the combustion air, approximately one pound of air per pound of wood, is fed through the grate into the fuel bed, while the remainder of the combustion air is distributed above the fuel in the furnace, and the fuel bed is maintained at a depth sufficient to consume all oxygen admitted under fire and to insure a continuous layer of fresh fuel thereover to entrap charred particles inside the fuel bed.

  10. N.J. DEP recognizes PPPL as state's top environmental steward | Princeton

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Plasma Physics Lab N.J. DEP recognizes PPPL as state's top environmental steward By Jeanne Jackson DeVoe May 21, 2013 Tweet Widget Google Plus One Share on Facebook Adam Cohen, center, PPPL's Deputy Director for Operations, and other PPPL employees clean up the grounds to celebrate Earth Week last month. Some 32 volunteers collected 350 pounds of trash and 35 pounds of leaves for composting. PPPL's composting and recycling efforts resulted in a 40 percent reduction in the amount of trash

  11. N.J. DEP recognizes PPPL as state's top environmental steward | Princeton

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Plasma Physics Lab N.J. DEP recognizes PPPL as state's top environmental steward By Jeanne Jackson DeVoe May 21, 2013 Tweet Widget Google Plus One Share on Facebook Adam Cohen, center, PPPL's Deputy Director for Operations, and other PPPL employees clean up the grounds to celebrate Earth Week last month. Some 32 volunteers collected 350 pounds of trash and 35 pounds of leaves for composting. PPPL's composting and recycling efforts resulted in a 40 percent reduction in the amount of trash

  12. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    3. Uranium purchased by owners and operators of U.S. civilian nuclear power reactors by origin country and delivery year, 2010-14 thousand pounds U3O8 equivalent; dollars per pound U3O8 equivalent Deliveries in 2010 Deliveries in 2011 Deliveries in 2012 Deliveries in 2013 Deliveries in 2014 Origin country Purchases Weighted-average price Purchases Weighted-average price Purchases Weighted-average price Purchases Weighted-average price Purchases Weighted-average price Australia 7,112 51.35 6,001

  13. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    5. Average price and quantity for uranium purchased by owners and operators of U.S. civilian nuclear power reactors by pricing mechanisms and delivery year, 2013-14 dollars per pound U3O8 equivalent; thousand pounds U3O8 equivalent Pricing mechanisms Domestic purchases1 Foreign purchases2 Total purchases 2013 2014 2013 2014 2013 2014 Contract-specified (fixed and base-escalated) pricing Weighted-average price 54.95 41.87 55.03 49.87 54.99 45.47 Quantity with reported price 14,530 15,711 14,732

  14. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    a. Uranium purchased by owners and operators of U.S. civilian nuclear power reactors ranked by price and distributed by quantity, 2012-14 deliveries thousand pounds U3O8 equivalent; dollars per pound U3O8 equivalent Deliveries in 2012 Deliveries in 2013 Deliveries in 2014 Quantity 1 distribution Quantity with reported price Weighted-average price Quantity with reported price Weighted-average price Quantity with reported price Weighted-average price First 7,119 38.24 7,175 34.24 6,665 30.26

  15. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    7. Uranium purchased by owners and operators of U.S. civilian nuclear power reactors by contract type and material type, 2014 deliveries thousand pounds U3O8 equivalent; dollars per pound U3O8 equivalent Spot 1 Contracts Long-Term Contracts 2 Total Material Type Quantity with reported price Weighted-average price Quantity with reported price Weighted-average price Quantity with reported price Weighted-average price U3O8 8,440 38.38 20,820 47.57 29,260 44.92 Natural UF6 4,405 35.30 13,373 53.13

  16. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    8. Contracts signed in 2014 by owners and operators of U.S. civilian nuclear power reactors by contract type thousand pounds U3O8 equivalent; dollars per pound U3O8 equivalent Purchase contract type (Signed in 2014) Quantity of deliveries received in 2014 Weighted-average price Number of purchase contracts for deliveries in 2014 Spot W W 67 Long-term W W 2 Total 12,263 34.83 69 W = Data withheld to avoid disclosure of individual company data. Notes: Totals may not equal sum of components because

  17. Recovery Act Workers Remediate and Restore Former Waste Sites, Help Reduce

    Office of Environmental Management (EM)

    Cold War Footprint | Department of Energy Remediate and Restore Former Waste Sites, Help Reduce Cold War Footprint Recovery Act Workers Remediate and Restore Former Waste Sites, Help Reduce Cold War Footprint The Hanford Site is looking greener these days after American Recovery and Reinvestment Act workers revegetated 166 acres across 12 waste sites, planting over 1,100 pounds of seeds and about 280,000 pounds of mulch. The largest of the sites, known as the BC Control Area, is an

  18. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    October 8, 2012 [Facility News] Near Miss at Barrow Due to Beach Erosion Bookmark and Share With a little help from his friends, Walter Brower (hidden by the ECOR) moves the system away from the ocean's edge as an early September storm pounds away at the beach. With a little help from his friends, Walter Brower (hidden by the ECOR) moves the system away from the ocean's edge as an early September storm pounds away at the beach. On a stormy Friday evening in early September, Walter Brower

  19. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    November 9, 2012 [Facility News] Unmanned Aircraft Test Flights Completed at Oliktok Point Bookmark and Share Because of its small size and light weight (72-inch wingspan and weighing about 22 pounds), the Bat-3 is launched using a bungee-powered catapult from the roof of a vehicle and can land autonomously on fixed wheels. Its modular design fits into two suitcase-sized containers. Because of its small size and light weight (72-inch wingspan and weighing about 22 pounds), the Bat-3 is launched

  20. Evergreen Renewables LLC | Open Energy Information

    Open Energy Info (EERE)

    Evergreen Renewables LLC Place: Indiana Zip: P.O. Box 565 Product: Biodiesel producer which runs a 19m liter plant in Hammond, Indiana. References: Evergreen Renewables LLC1 This...

  1. Biolix | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Biolix Place: Parana, Brazil Product: Biolix is a biodiesel producer with an installed capacity of 9m liters a year, it holds the Social Fuel...

  2. Grecycle Arizona LLC | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Name: Grecycle Arizona LLC Place: Tucson, Arizona Product: Biodiesel producer out of cooking oil that operates a 1.2m liter plant in Tucson, Arizona....

  3. AREA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... based upon a literal reading of the compliance procedure in Part II page 3 of the DOE audit Guidance which states costs must be paid before the reimbursement request is made. ...

  4. ORNL researcher developing robotic hand

    ScienceCinema (OSTI)

    Dr.Lonnie Love

    2010-01-08

    Oak Ridge National Lab is literally giving the robotics industry a hand. One scientist there is currently working on a fluid powered hand that will help everyone from amputees to the military.

  5. ECR - 88-Inch Cyclotron

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    copper contamination of beams. The chamber is approximately 2 liters in volume; 33 cm in length by 9 cm inner diameter. The pumping is accomplished through 6 radial slots in the...

  6. Hanford Site Creates One-Touch Wonder for Groundwater Treatment Systems

    Broader source: Energy.gov [DOE]

    RICHLAND, Wash. – Engineers and operators supporting the Richland Operations Office at the Hanford site found a way to start and stop groundwater treatment along the Columbia River with literally the push of a button.

  7. Close-Out Summary: Clarification on the Use of Customer Resource...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Exhibits C. By doing this, BPA is correcting for resources that otherwise (through a literal reading of the July 2007 Policy) would have been counted as "zero" in the...

  8. 5(b)/9(c) Record of Decision

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of the limit. See NRP080005, at 2-3. Evaluation and Decision: BPA acknowledges that a literal reading of the calculation method referenced in Seattle et al.'s comment is...

  9. Thermoelectric Materials, Devices and Systems:

    Office of Environmental Management (EM)

    ... and demonstrate on an engine dynamometer 121 and full ... ZT and corresponding temperature 129 data are from ... than 452 50,000 liters of diesel fuel per year. 453 6. ...

  10. Heavy-Duty Waste Hauler with Chemically Correct Natural Gas Engine Diluted with EGR and Using a Three-Way Catalyst: Final Report, 24 February 2004 -- 23 February 2006

    SciTech Connect (OSTI)

    Reppert, T.; Chiu, J.

    2005-09-01

    This report discusses the development of a E7G 12-liter, lean-burn natural gas engine--using stoichiometric combustion, cooled exhaust gas recirculation, and three-way catalyst technologies--for refuse haulers.

  11. Dynein Motor Domain Shows Ring-Shaped Motor, Buttress

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    normal density. A 75-liter fed-batch growth produced 14 kg of yeast and required a new freezer be purchased to store it all. With this massive increase in starting material, enough...

  12. Dynein Motor Domain Shows Ring-Shaped Motor, Buttress

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    normal density. A 75-liter fed-batch growth produced 14 kg of yeast and required a new freezer be purchased to store it all. With this massive increase in starting material,...

  13. Cost and Performance Comparison Baseline for Fossil Energy Power...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    23 Filtered Water Tank Vertical, cylindrical 1,919,204 liter (507,000 gal) 1 0 24 Makeup Water Demineralizer Multi-media filter, cartridge filter, RO membrane assembly,...

  14. Cost and Performance Baseline for Fossil Energy Plants Volume...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    23 Filtered Water Tank Vertical, cylindrical 1,839,000 liter (486,000 gal) 1 0 24 Makeup Water Demineralizer Multi-media filter, cartridge filter, RO membrane assembly,...

  15. Microsoft Word - S09187_1stQtr2012.doc

    Office of Legacy Management (LM)

    U.S. Department of Energy Office of Legacy Management Rocky Flats, Colorado, Site ... Alamos National Laboratory LM Office of Legacy Management gL micrograms per liter M&M ...

  16. DOE Laboratory Partnerships

    Broader source: Energy.gov [DOE]

    DOE national laboratories were created to support the various missions of the Department, including energy, national security, science and related environmental activities. The laboratories conduct innovative research and development in literally hundreds of technology areas, some available nowhere else.

  17. Usina Gloria | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Usina Gloria Place: Brazil Product: The company will run a 90m liter ethanol plant, together with a 30m biodiesel facility in Mato Grosso do...

  18. Videos | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in Motion Google+ STEM Hangout Webcast of the Energy Literate Citizenry from K-to-Gray What's Your Energy Pledge? Conversation on the Future of the Wind Industry Webcast of...

  19. ALSNews Vol. 348

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 Print The Molecular Ingenuity of a Unique Fish Scale fish scales ALS research has shown how the scales of a freshwater fish found in the Amazon Basin can literally reorient ...

  20. ALSNews Vol. 348

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALSNews Vol. 348 Print The Molecular Ingenuity of a Unique Fish Scale fish scales ALS research has shown how the scales of a freshwater fish found in the Amazon Basin can literally ...

  1. ALSNews Vol. 348

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    48 Print The Molecular Ingenuity of a Unique Fish Scale fish scales ALS research has shown how the scales of a freshwater fish found in the Amazon Basin can literally reorient ...

  2. ALSNews Vol. 348

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 Print The Molecular Ingenuity of a Unique Fish Scale fish scales ALS research has shown how the scales of a freshwater fish found in the Amazon Basin can literally reorient...

  3. Soil & Groundwater Remediation

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) manages one of the largest groundwater and soil remediation efforts in the world.  The inventory at the DOE sites includes 6.5 trillion liters of contaminated...

  4. Pinellas Environmental Restoration Project Quarterly Progress...

    Office of Legacy Management (LM)

    ... turbidity, and temperature recorded at the time ... was anomalously low at 0.048 milligrams per liter (mgL). ... chemical is added to the treatment system influent water for ...

  5. Microsoft Word - DOE-ID-13-054 Maryland EC B3-6.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Impact Chemical UseStorage - It is expected that nitric acid, sulfuric acid, etc. for etching of steel speciments will be used. Less than 1 liter of each will be needed. Chemical...

  6. Microsoft Word - DOE-ID-15-024 UNLV EC B3-6.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    is expected to be less than 10 liters per year, and is expected to consist of solvents (acid, base, andor organic) with trace amounts of rare earths and heavy metals....

  7. Practical applications of the R6 leak-before-break procedure

    SciTech Connect (OSTI)

    Bouchard, P.J.

    1997-04-01

    A forthcoming revision to the R6 Leak-before-Break Assessment Procedure is briefly described. Practical application of the LbB concepts to safety-critical nuclear plant is illustrated by examples covering both low temperature and high temperature (>450{degrees}C) operating regimes. The examples highlight a number of issues which can make the development of a satisfactory LbB case problematic: for example, coping with highly loaded components, methodology assumptions and the definition of margins, the effect of crack closure owing to weld residual stresses, complex thermal stress fields or primary bending fields, the treatment of locally high stresses at crack intersections with free surfaces, the choice of local limit load solution when predicting ligament breakthrough, and the scope of calculations required to support even a simplified LbB case for high temperature steam pipe-work systems.

  8. Ethylene plant commissioned at Corpus Christi

    SciTech Connect (OSTI)

    Not Available

    1984-01-01

    Ethylene Plant Commissioned at Corpus Christi. Corpus Christi Petrochemical Co. has commissioned its $600 million ethylene plant at Corpus Christi, Tex. Plant capacities include 1.2 billion lb/yr of ethylene, 560 million lb/yr of propylene, 400 million lb/yr of crude butadiene mixture, 60 million gal of benzene, 45 million gal of gasoline blending components, and 50 million gal of fuel oils. The ethylene and propylene will be transported by pipeline to Houston for further processing. At the Corpus Christi facilities, process pressures range from full vacuum to 1800 psig, and process temperatures range from -260/sup 0/ to +1600/sup 0/F. The plant uses gas oil and naphtha as feedstock, but also has some flexibility to use ethane or LPG as feedstock. Stone and Webster Engineering Corp. engineered and Brown and Root Inc. built the plant.

  9. Lightweight PV Inverters: Dual Bi-Directional IGBTs Modules Enables Breakthrough PV Inverter Using Current Modulation Topology

    SciTech Connect (OSTI)

    2012-01-30

    Solar ADEPT Project: PV inverters convert DC power generated by modules into usable AC power. IPCs initial 30kW 94lb. PV inverter reduces the weight of comparable 30kW PV inverters by 90%reducing the cost of materials, manufacturing, shipping, and installation. With ARPA-E support, new bi-directional silicon power switches will be developed, commercialized, and utilized in IPCs next-generation PV inverter. With these components, IPC will produce 100kW inverters that weight less than 100lb., reducing the weight of conventional 3,000lb. 100kW inverters by more than 95%. The new power switches will cut IPCs $/W manufacturing cost in half, as well as further reduce indirect shipping and installation costs.

  10. CX-002995: Categorical Exclusion Determination | Department of Energy

    Office of Environmental Management (EM)

    995: Categorical Exclusion Determination CX-002995: Categorical Exclusion Determination Defense Waste Processing Facility Water Separation from Decon Frit: Analysis of Spent Decon Frit Slurry CX(s) Applied: B3.6 Date: 06/16/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office Savannah River National Laboratory (SRNL) will be receiving 4 replicate 1-liter frit decon aqueous samples, and 2 replicate 1-liter frit decon wet solids samples from

  11. Best available control technology (BACT) equivalent for the control of volatile organic emissions from paint dipping operations

    SciTech Connect (OSTI)

    Blankenship, W.R.; Pugh, C.W. Jr.

    1999-07-01

    This paper provides details of a study conducted to demonstrate an equivalent method of Best Available Control Technology (BACT) compliance for volatile organic emissions from dip coating of certain miscellaneous metal parts. The study was proposed to show that the total volatile organic compound (VOC) emissions from 3.8 lb of VOC/gallon coating formulations were no greater than the total VOC emissions from 3.5 lb/gallon formulations used under the same conditions for coating steel joists. The presumptive BACT standard enforced by the Virginia Department of Environmental Quality (DEQ) for dip coating of steel joists is 3.5 lb/gallon. The requirement of 3.5 lb/gallon was derived from the US Environmental Protection Agency Guideline Series Control of Volatile Organic Emissions from Existing Stationary Sources--Volume 6: Surface Coating of Miscellaneous Metal Parts and Products. On June 5, 1998 the source completed a 12 month, full scale comparison study under a consent order with the Virginia DEQ. During the study period, the source made daily measurements of product produced, paint used, and emissions from the control and test paint tanks, and reported data to EPA and the DEQ every two months. The study concluded that a 26 percent reduction in paint usage and a 20 percent reduction in emissions was achieved in the test tanks using a 3.8 lb/gal coating compared to the control tanks using a 3.5 lb/gal coating. This study enables the source to achieve greater emission reductions than the presumptive BACT level and at the same time reduce painting costs by 34%. This study provides positive results for the environment, the steel joist industry, and the construction industry. This study could impact EPA's current Maximum Achievable Control Technology (MACT) rule development for Miscellaneous Metal Parts and Products and national VOC rules for this source category under Section 183(e) of the Clean Air Act.

  12. Techno-Economic Analysis of Biomass Fast Pyrolysis to Transportation Fuels

    SciTech Connect (OSTI)

    Wright, M. M.; Satrio, J. A.; Brown, R. C.; Daugaard, D. E.; Hsu, D. D.

    2010-11-01

    This study develops techno-economic models for assessment of the conversion of biomass to valuable fuel products via fast pyrolysis and bio-oil upgrading. The upgrading process produces a mixture of naphtha-range (gasoline blend stock) and diesel-range (diesel blend stock) products. This study analyzes the economics of two scenarios: onsite hydrogen production by reforming bio-oil, and hydrogen purchase from an outside source. The study results for an nth plant indicate that petroleum fractions in the naphtha distillation range and in the diesel distillation range are produced from corn stover at a product value of $3.09/gal ($0.82/liter) with onsite hydrogen production or $2.11/gal ($0.56/liter) with hydrogen purchase. These values correspond to a $0.83/gal ($0.21/liter) cost to produce the bio-oil. Based on these nth plant numbers, product value for a pioneer hydrogen-producing plant is about $6.55/gal ($1.73/liter) and for a pioneer hydrogen-purchasing plant is about $3.41/gal ($0.92/liter). Sensitivity analysis identifies fuel yield as a key variable for the hydrogen-production scenario. Biomass cost is important for both scenarios. Changing feedstock cost from $50-$100 per short ton changes the price of fuel in the hydrogen production scenario from $2.57-$3.62/gal ($0.68-$0.96/liter).

  13. Light Duty Vehicle CNG Tanks

    Energy Savers [EERE]

    Duty Vehicle CNG Tanks Dane A. Boysen, PhD Program Director Advanced Research Projects Agency-Energy, US DOE dane.boysen@doe.gov Fiber Reinforced Polymer Composite Manufacturing Workshop Advanced Manufacturing Office, EERE, US DOE Arlington VA, January 13, 2014 Advanced Research Projects Agency-Energy Can I put my luggage in the trunk? Uh, sorry no Commercial CNG Tanks Tank Type I Type IV Material steel carbon fiber Capacity 12 gallon 12 gallon Weight 490 lb 190 lb Cost $1,700 $4,300 50% less

  14. Modeling Coupled THM Processes and Brine Migration in Salt at High Temperatures

    SciTech Connect (OSTI)

    Rutqvist, Jonny; Blanco-Martin, Laura; Molins, Sergi; Trebotich, David; Birkholzer, Jens

    2015-09-01

    In this report, we present FY2015 progress by Lawrence Berkeley National Laboratory (LBNL) related to modeling of coupled thermal-hydrological-mechanical-chemical (THMC) processes in salt and their effect on brine migration at high temperatures. This is a combined milestone report related to milestone Salt R&D Milestone “Modeling Coupled THM Processes and Brine Migration in Salt at High Temperatures” (M3FT-15LB0818012) and the Salt Field Testing Milestone (M3FT-15LB0819022) to support the overall objectives of the salt field test planning.

  15. Summary Max Total Units

    Energy Savers [EERE]

    Summary Max Total Units *If All Splits, No Rack Units **If Only FW, AC Splits 1000 52 28 28 2000 87 59 35 3000 61 33 15 4000 61 33 15 Totals 261 153 93 ***Costs $1,957,500.00 $1,147,500.00 $697,500.00 Notes: added several refrigerants removed bins from analysis removed R-22 from list 1000lb, no Glycol, CO2 or ammonia Seawater R-404A only * includes seawater units ** no seawater units included *** Costs = (total units) X (estimate of $7500 per unit) 1000lb, air cooled split systems, fresh water

  16. Efficient utilization of red maple lumber in glued-laminated timber beams. Forest Service research paper

    SciTech Connect (OSTI)

    Janowiak, J.J.; Manbeck, H.B.; Hernandez, R.; Moody, R.C.; Blankenhorn, P.R.

    1995-09-01

    The feasibility of utilizing cant-sawn hardwood lumber, which would not usually be desired for furniture manufacture, was studied for the manufacture of structural glue-laminated (glulam) timber. Two red maple beam combinations were evaluated. Test results of 42 red maple glulam beams showed that it was feasible to develop structural glulam timber from cant-swan lumber. The glulam combinations made from E-rated lumber exceeded the target design bending stress of 2,400 lb/in 2 and met the target modulus of elasticity (MOE) of 1.8 x 106 lb/in 2.

  17. Sandia Corporate Overview - Core group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the United States Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. D. Todd Griffith, PhD Sandia National Laboratories WIND TURBINE BLADE MANUFACTURE 2012 28 November, 2012 Dusseldorf, Germany Large Rotor Development: Sandia 100-meter Blade Research Sandia Technical Report Number: SAND2012-8780C  Size  1.5-5.0+ MW  Towers: 65-100+ meters  Blades: 34-60+ meters  Costs (traditional) * System ~ $3/lb * Blades ~ $6/lb Wind Industry

  18. Summary Notes from 1 November 2007 Generic Technical Issue Discussion on Removal of Highly Radioactive Radionuclides/Key Radionuclides to the Maximum Extent Practical

    Office of Environmental Management (EM)

    Max Total Units *If All Splits, No Rack Units **If Only FW, AC Splits 1000 52 28 28 2000 87 59 35 3000 61 33 15 4000 61 33 15 Totals 261 153 93 ***Costs $1,957,500.00 $1,147,500.00 $697,500.00 Notes: added several refrigerants removed bins from analysis removed R-22 from list 1000lb, no Glycol, CO2 or ammonia Seawater R-404A only * includes seawater units ** no seawater units included *** Costs = (total units) X (estimate of $7500 per unit) 1000lb, air cooled split systems, fresh water Refrig

  19. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Alternative Fuel Vehicle (AFV) Acquisition Goal North Carolina established a goal that at least 75% of new or replacement state government light-duty cars and trucks with a gross vehicle weight rating of 8,500 pounds or less must be AFVs or low emission vehicles. (Reference North Carolina General Statutes 143-215.107C)

  20. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Idle Reduction Weight Exemption A vehicle equipped with a fully functional idle reduction system designed to reduce fuel use and emissions from engine idling may exceed the maximum weight limitations by up to 400 pounds to accommodate the added weight of the idle reduction technology. (Reference Oregon Revised Statutes 818.03

  1. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Idle Reduction Weight Exemption Any vehicle equipped with qualifying idle reduction technology may exceed the state's gross vehicle weight limits by up to 400 pounds to compensate for the additional weight of the idle reduction technology. Upon request, vehicle operators must provide proof that the idle reduction technology is fully functional. (Reference Texas Statutes, Transportation Code 622.955

  2. TO: FILE FROM: SUBJECT:

    Office of Legacy Management (LM)

    ... Three 6OUOs6 weF6 atilieed aE.fOllOWSt;, ,,.,"' ':- ,.' .(a), .Dupont,.Co. (Pebs Pig&>,6 Dept.);' TNapulp Or.60 Yaqxc&>? acid a&e was purchased In L&h, lQ41.,at 12-l& per pound ...

  3. SEP Success Story: Washington State Becomes Largest Public Consumer of Biodiesel

    Broader source: Energy.gov [DOE]

    Thanks to a $165,000 Recovery Act loan through the State Energy Program, Washington State Ferries run on a blended biodiesel fuel that will prevent over 65 million pounds of carbon dioxide from being emitted into the environment each year. Learn more.

  4. Revised Emergency Planning and Community Right-to-Know Act (EPCRA), Section 313, Toxic Chemical Release reporting for calendar year 1998

    SciTech Connect (OSTI)

    Evans, R.A.

    2000-01-01

    This report contains forms which contain information on the physical location of the Y-12 Plant and the amount of lead that was released to the East Fork Poplar Creek and amounts transferred to landfills on-site as well as landfills in Texas and South Carolina. Amounts are given in pounds per year.

  5. Field Trip to EM’s Idaho Treatment Facility is Students’ High Point of Class

    Broader source: Energy.gov [DOE]

    IDAHO FALLS, Idaho – For graduate students in Dr. Mary Lou Dunzik-Gougar’s Idaho State University (ISU) radioactive waste management class, waste treatment takes on a new meaning when watching the Supercompactor transform a 725-pound, 35-inch-tall, 55-gallon drum into what looks like a 7-inch-tall, 2-foot-diameter hockey puck.

  6. Activated carbon injection - a mercury control success story

    SciTech Connect (OSTI)

    2008-07-01

    Almost 100 full-scale activated carbon injection (ACI) systems have been ordered by US electric utilities. These systems have the potential to remove over 90% of the mercury in flue, at a cost below $10,000 per pound of mercury removal. Field trials of ACI systems arm outlined. 1 fig.

  7. Demand for Food for People in Need Remains High Throughout the Year

    Broader source: Energy.gov [DOE]

    WASHINGTON, D.C. – EM and its field sites donated 53,630 pounds — or 27 tons — of non-perishable items to a food drive by federal workers to help feed families across the country in 2013.

  8. West Valley Demonstration Project Food Drive Delivers Food for 700 Families

    Broader source: Energy.gov [DOE]

    WEST VALLEY, N.Y. – EM employees at West Valley Demonstration Project (WVDP) helped collect and deliver 114,843 pounds of food, including 360 turkeys, to nine food pantries in the West Valley area, just in time to benefit about 700 families in need during the holidays.

  9. Thanksgiving Goodwill: West Valley Demonstration Project Food Drive Provides 640 Turkeys to People in Need

    Broader source: Energy.gov [DOE]

    WEST VALLEY, N.Y. – Just in time for the holidays, eight local food pantries received 640 turkeys, 1,800 pounds of potatoes and other items, thanks to an effort by EM employees and contractors supporting cleanup at West Valley Demonstration Project (WVDP) and other volunteers.

  10. EM Makes Strong Showing in Federal Food Drive

    Broader source: Energy.gov [DOE]

    WASHINGTON, D.C. – EM made a strong showing in this year’s Feds Feed Families drive, contributing 46,493 pounds of food across the DOE complex and topping it off by winning top prize in a government-wide chili cookoff held at the Department’s headquarters.

  11. NETL - Chemical Looping Reactor

    ScienceCinema (OSTI)

    None

    2014-06-26

    NETL's Chemical Looping Reactor unit is a high-temperature integrated CLC process with extensive instrumentation to improve computational simulations. A non-reacting test unit is also used to study solids flow at ambient temperature. The CLR unit circulates approximately 1,000 pounds per hour at temperatures around 1,800 degrees Fahrenheit.

  12. Pechiney Rolled Products: Plant-Wide Energy Assessment Identifies Opportunities to Optimize Aluminum Casting and Rolled Operations

    SciTech Connect (OSTI)

    2004-07-01

    A Pechiney Rolled Products plant focused on various aluminum casting processes during a PWA. The assessment revealed potential annual savings of 460,000 MMBtu in natural gas, 9.6 million kWh in electricity, 69 million pounds in CO2, and $2.5 million.

  13. Engineering scale development of the vapor-liquid-solid (VLS) process for the production of silicon carbide fibrils. Phase 2

    SciTech Connect (OSTI)

    Ohnsorg, R.W.; Hollar, W.E. Jr.; Lau, S.K.; Ko, F.K.; Schatz, K.

    1995-04-01

    As reinforcements for composites, VLS SiC fibrils have attractive mechanical properties including high-strength, high modulus, and excellent creep resistance. To make use of their excellent mechanical properties in a composite, a significant volume fraction (>10%) of aligned, long fibrils (>2 mm) needs to be consolidated in the ceramic matrix. The fibrils must be processed into an assembly that will allow for composite fabrication while maintaining fibril alignment and length. With Advanced Product Development (APD) as the yam fabrication subcontractor, Carborundum investigated several approaches to achieve this goaL including traditional yam-forming processes such as carding and air-vortex spinning and nontraditional processes such as tape forming and wet casting. Carborundum additionally performed an economic analysis for producing 500 and 10,000 pounds of SiC fibrils annually using both conservative and more aggressive processing parameters. With the aggressive approach, the projected costs for SiC fibril production for 500 and 10,000 pounds per year are $1,340/pound and $340/pound, respectively.

  14. NETL - Chemical Looping Reactor

    SciTech Connect (OSTI)

    2013-07-24

    NETL's Chemical Looping Reactor unit is a high-temperature integrated CLC process with extensive instrumentation to improve computational simulations. A non-reacting test unit is also used to study solids flow at ambient temperature. The CLR unit circulates approximately 1,000 pounds per hour at temperatures around 1,800 degrees Fahrenheit.

  15. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Weight Restriction Increase for Natural Gas Vehicles A vehicle fueled by compressed natural gas may exceed the gross vehicle weight restrictions by 2,000 pounds, except on the interstate system or a highway, road, or bridge that is subject to maximum weight restrictions. (Reference Ohio Revised Code 5577.044

  16. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Liquefied Natural Gas (LNG) Measurement LNG is taxed based on the gasoline gallon equivalent, or 6.6 pounds of LNG for one gallon of motor fuel, unless a diesel gallon equivalent is established by the national conference on weights and measures. (Reference Ohio Revised Code 5735.012 and 5735.013

  17. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Compressed Natural Gas (CNG) and Propane Tax Retail sales for CNG and liquefied petroleum gas (propane) used to operate vehicles are subject to a modified tax based on energy content. CNG is taxed per 120 cubic feet, measured at 14.73 pounds per square inch absolute base pressure. (Reference Montana Code Annotated 15-70-711

  18. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Compressed Natural Gas (CNG) Tax CNG used in motor vehicles is subject to a state motor fuel tax rate of $0.26 per gasoline gallon equivalent (GGE). For taxation purposes, one GGE is equal to 5.66 pounds or 126.67 standard cubic feet of natural gas. (Reference House Bill 5466, 2014, and Special Notice 2014-2

  19. Appendix A: Reference case

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    12.92 12.90 13.09 -0.2% 1 Commercial trucks 8,501 to 10,000 pounds gross vehicle weight rating. 2 CAFE standard based on projected new vehicle sales. 3 Includes CAFE credits for...

  20. Method for releasing hydrogen from ammonia borane

    DOE Patents [OSTI]

    Varma, Arvind; Diwan, Moiz; Shafirovich, Evgeny; Hwang, Hyun-Tae; Al-Kukhun, Ahmad

    2013-02-19

    A method of releasing hydrogen from ammonia borane is disclosed. The method comprises heating an aqueous ammonia borane solution to between about 80-135.degree. C. at between about 14.7 and 200 pounds per square inch absolute (psia) to release hydrogen by hydrothermolysis.

  1. One Man's Trash is Another Man's Fuel

    Broader source: Energy.gov [DOE]

    The average American throws away more than 900 pounds of trash every year, and as the organic waste degrades it produces methane gas. Some landfills are now exploring ways to use it rather than venting the gas directly into the atmosphere.

  2. The Ames Project (1942-1946) | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Ames Project (1942-1946) The Ames Laboratory was officially founded on May 17, 1947, following development of a process to purify uranium metal for the historic Manhattan Project. From 1942 to 1946, Ames Lab scientists produced over two-million pounds of uranium metal. This video details that work and has interviews with some of the researchers involved in the project.

  3. Overview of interstate hydrogen pipeline systems.

    SciTech Connect (OSTI)

    Gillette, J .L.; Kolpa, R. L

    2008-02-01

    The use of hydrogen in the energy sector of the United States is projected to increase significantly in the future. Current uses are predominantly in the petroleum refining sector, with hydrogen also being used in the manufacture of chemicals and other specialized products. Growth in hydrogen consumption is likely to appear in the refining sector, where greater quantities of hydrogen will be required as the quality of the raw crude decreases, and in the mining and processing of tar sands and other energy resources that are not currently used at a significant level. Furthermore, the use of hydrogen as a transportation fuel has been proposed both by automobile manufacturers and the federal government. Assuming that the use of hydrogen will significantly increase in the future, there would be a corresponding need to transport this material. A variety of production technologies are available for making hydrogen, and there are equally varied raw materials. Potential raw materials include natural gas, coal, nuclear fuel, and renewables such as solar, wind, or wave energy. As these raw materials are not uniformly distributed throughout the United States, it would be necessary to transport either the raw materials or the hydrogen long distances to the appropriate markets. While hydrogen may be transported in a number of possible forms, pipelines currently appear to be the most economical means of moving it in large quantities over great distances. One means of controlling hydrogen pipeline costs is to use common rights-of-way (ROWs) whenever feasible. For that reason, information on hydrogen pipelines is the focus of this document. Many of the features of hydrogen pipelines are similar to those of natural gas pipelines. Furthermore, as hydrogen pipeline networks expand, many of the same construction and operating features of natural gas networks would be replicated. As a result, the description of hydrogen pipelines will be very similar to that of natural gas pipelines. The following discussion will focus on the similarities and differences between the two pipeline networks. Hydrogen production is currently concentrated in refining centers along the Gulf Coast and in the Farm Belt. These locations have ready access to natural gas, which is used in the steam methane reduction process to make bulk hydrogen in this country. Production centers could possibly change to lie along coastlines, rivers, lakes, or rail lines, should nuclear power or coal become a significant energy source for hydrogen production processes. Should electrolysis become a dominant process for hydrogen production, water availability would be an additional factor in the location of production facilities. Once produced, hydrogen must be transported to markets. A key obstacle to making hydrogen fuel widely available is the scale of expansion needed to serve additional markets. Developing a hydrogen transmission and distribution infrastructure would be one of the challenges to be faced if the United States is to move toward a hydrogen economy. Initial uses of hydrogen are likely to involve a variety of transmission and distribution methods. Smaller users would probably use truck transport, with the hydrogen being in either the liquid or gaseous form. Larger users, however, would likely consider using pipelines. This option would require specially constructed pipelines and the associated infrastructure. Pipeline transmission of hydrogen dates back to late 1930s. These pipelines have generally operated at less than 1,000 pounds per square inch (psi), with a good safety record. Estimates of the existing hydrogen transmission system in the United States range from about 450 to 800 miles. Estimates for Europe range from about 700 to 1,100 miles (Mohipour et al. 2004; Amos 1998). These seemingly large ranges result from using differing criteria in determining pipeline distances. For example, some analysts consider only pipelines above a certain diameter as transmission lines. Others count only those pipelines that transport hydrogen from a producer to a customer (e.g., those pipelines designed for in-plant transport of hydrogen for use as feedstock or fuel are not counted). Operational status and hydrogen purity levels are also factors in defining these ranges. Hydrogen pipelines in the United States are predominantly along the Gulf Coast and connect major hydrogen producers with well-established, long-term customers. These hydrogen transmission systems pall by comparison with the 180,000-mile natural gas transmission pipeline. Since 1939, Germany has had a 130-mile pipeline carrying 20,000 lb/hour of hydrogen in a 10-inch pipe at 290 psi gauge (psig). The longest hydrogen pipeline in Europe is owned by Air Liquide and extends 250 miles from Northern France to Belgium. In theory, a blend of up to 20% hydrogen in natural gas can be transported without modifying natural gas pipelines (Oney et al. 1994).

  4. PORTABLE ACOUSTIC MONITORING PACKAGE (PAMP)

    SciTech Connect (OSTI)

    John l. Loth; Gary J. Morris; George M. Palmer; Richard Guiler; Deepak Mehra

    2003-07-01

    The 1st generation acoustic monitoring package was designed to detect and analyze weak acoustic signals inside natural gas transmission lines. Besides a microphone it housed a three-inch diameter aerodynamic acoustic signal amplifier to maximize sensitivity to leak induced {Delta}p type signals. The theory and test results of this aerodynamic signal amplifier was described in the master's degree thesis of our Research Assistant Deepak Mehra who is about to graduate. To house such a large three-inch diameter sensor required the use of a steel 300-psi rated 4 inch weld neck flange, which itself weighed already 29 pounds. The completed 1st generation Acoustic Monitoring Package weighed almost 100 pounds. This was too cumbersome to mount in the field, on an access port at a pipeline shut-off valve. Therefore a 2nd generation and truly Portable Acoustic Monitor was built. It incorporated a fully self-contained {Delta}p type signal sensor, rated for line pressures up to 1000 psi with a base weight of only 6 pounds. This is the Rosemont Inc. Model 3051CD-Range 0, software driven sensor, which is believed to have industries best total performance. Its most sensitive unit was purchased with a {Delta}p range from 0 to 3 inch water. This resulted in the herein described 2nd generation: Portable Acoustic Monitoring Package (PAMP) for pipelines up to 1000 psi. Its 32-pound total weight includes an 18-volt battery. Together with a 3 pound laptop with its 4-channel data acquisition card, completes the equipment needed for field acoustic monitoring of natural gas transmission pipelines.

  5. Test report for slow rotation core sampling test

    SciTech Connect (OSTI)

    Ralston, G.L.

    1995-04-03

    This report documents the temperature increase experienced when core sampling equipment is rotated slowly with a relatively low downforce applied to the drill string (nominal 10 rpm/400 lb downforce). The test was carried out in close to worst-case conditions, rotating against a cement mixture in one test sequence, and a steel plate in the second test sequence.

  6. ASN Aircraft accident Beechcraft 1900C N27RA Tonopah-Test Range...

    National Nuclear Security Administration (NNSA)

    Accident description languages: Share 0 Statd,LB:5E)(WEWkNF75WLEW)w(Ni7wkE.(wnNa75WLEW)w(... According to the Air Force Materiel Command Accident Investigation Board report, the pilot ...

  7. PBi3aws

    Office of Legacy Management (LM)

    ... Lb Lat La, s&t, tram &a h. iY;bt* SAh u u u 2073 24m ZF 46.4 U?S 24.8 294 31.6 -.- --.. ..-. . ..-- " s A&l TAkkiZJW A? tiliT?W, iiT;ur t 3TiiEil.2, ISfC., DALLAS, ...

  8. Lattice Boltzmann modeling of boiling heat transfer: The boiling curve and the effects of wettability

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Li, Q.; Kang, Q. J.; Francois, M. M.; He, Y. L.; Luo, K. H.

    2015-03-03

    A hybrid thermal lattice Boltzmann (LB) model is presented to simulate thermal multiphase flows with phase change based on an improved pseudopotential LB approach (Li et al., 2013). The present model does not suffer from the spurious term caused by the forcing-term effect, which was encountered in some previous thermal LB models for liquid–vapor phase change. Using the model, the liquid–vapor boiling process is simulated. The boiling curve together with the three boiling stages (nucleate boiling, transition boiling, and film boiling) is numerically reproduced in the LB community for the first time. The numerical results show that the basic featuresmore » and the fundamental characteristics of boiling heat transfer are well captured, such as the severe fluctuation of transient heat flux in the transition boiling and the feature that the maximum heat transfer coefficient lies at a lower wall superheat than that of the maximum heat flux. Moreover, the effects of the heating surface wettability on boiling heat transfer are investigated. It is found that an increase in contact angle promotes the onset of boiling but reduces the critical heat flux, and makes the boiling process enter into the film boiling regime at a lower wall superheat, which is consistent with the findings from experimental studies.« less

  9. I

    Office of Legacy Management (LM)

    of thQ rmt9x.i of holdlk3q Lb de and RfJna Thoroforca, it fs bul:med thsx'bit ii :wy 5s ussfux to aontsr3,ao Bon* Of thO8@ OXf3-iXlt8 at *&' lVOCit?F)r A aa ple of ths...

  10. Book2.xls?attach=1

    Office of Environmental Management (EM)

    3,4,5 on 12 hrs @ 100% load and 12 hrs at 35% load. (100% load 107 MW). SO2 0.22 lbMBtu on all three units. Run 0600 - 1800 at 100% load, and the rest at 35% load on all...

  11. L CONSENT FORM

    Office of Legacy Management (LM)

    "Name C,&L -fldais Di I. l-9?& ludid%L Signature by owner(s) of property or authorized representative 4625 Roysl 4% I Address pro f Lb l' iczk4 u "r6 -97F 3 VP0 Telephone Date...

  12. Disorder Matters in the 5/2 Fractional Quantum Hall Effect (invited...

    Office of Scientific and Technical Information (OSTI)

    unpolarized ground state: A aVn-pn-F electron density samples well width (nm) density (1011 cm-2) mobility (106V s) lB at v52 (nm) WIb A 65 0.41 10 31.1 2.1 B 60 0.5 10 28.2 ...

  13. DOE/NETL's advanced NOx emissions control technology R & D program

    SciTech Connect (OSTI)

    Lani, B.W.; Feeley, T.J. III; Miller, C.E.; Carney, B.A.; Murphy, J.T.

    2006-11-15

    Efforts are underway to provide more cost-effective options for coal-fired power plants to meet stringent emissions limits. Several recently completed DOE/NETL R & D projects were successful in achieving the short-term goal of controlling NOx emissions at 0.15 lb/MMBtu using in-furnace technologies. In anticipation of CAIR and possible congressional multi-pollutant legislation, DOE/NETL issued a solicitation in 2004 to continue R & D efforts to meet the 2007 goal and to initiate R & D targeting the 2010 goal of achieving 0.10 lb/MMBtu using in-furnace technologies in lieu of SCR. As a result, four new NOx R & D projects are currently underway and will be completed over the next three years. The article outlines: ALSTOM's Project on developing an enhanced combustion, low NOx burner for tangentially-fired boilers; Babcock and Wilcox's demonstration of an advanced NOx control technology to achieve an emission rate of 0.10 lb/MMBtu while burning bituminous coal for both wall- and cyclone-fired boilers; Reaction Engineering International's (REI) full-scale field testing of advanced layered technology application (ALTA) NOx control for cyclone fired boilers; and pilot-scale testing of ALTA NOx control of coal-fired boilers also by REI. DOE/NETL has begun an R & D effort to optimize performance of SCR controls to achieve the long term goal of 0.01 lb/MMBtu NOx emission rate by 2020. 1 fig.

  14. WASHINGTON. DC.

    Office of Legacy Management (LM)

    WASHINGTON. DC. tzr.~Dfak nuf, Ama fall- II* 8. Atoalc l%mqy Camlealnn . . . . ,L:,. ' ,. 8ta loui Are0 offlaa " . . : ' ; ,.' ~. ._ ; . . ..!"C.. ,:. . . ..~.;~..?n:,.;,, ,_ ," .L,: ' ..: ' I I. P.O. Box 36 ,, ,,,,: ,.,.:... . . Brorarw Btotlrn . St. Louis, $105cnlr1 =- %A. WO. LB - FCA Fbn. A. Dfcklooa, V?,ao huralb$

  15. Aqueous absorption fluids. Annual report, July 1989-October 1990

    SciTech Connect (OSTI)

    Langeliers, J.; Chandler, T.; Rockenfeller, U.

    1990-11-01

    The report describes the third year of study of aqueous-based working fluids that will allow air-cooled absorption chiller operation. The successful development of such fluids will eliminate the need for cooling towers in gas-fired chiller equipment for residential and unitary markets and possibly allow for building heating with absorber heat. The thermophysical property measurements were completed and the vapor pressure and specific heat data were used to compute the enthalpy of LB621-H2O solutions. Solution film heat transfer coefficients were measured in the test sorber apparatus and a dramatic increase in film heat transfer was observed in the presence of heat transfer additives. Measured equilibrium and film heat transfer data were used in the single-stage absorption cycle computer model to analyze the potential performance of LB621-H2O; the analysis confirmed the superiority of LB621-H2O as a single-stage working fluid. In addition, thermal stability and corrosion rate tests demonstrated that LB621-H2O is stable and non-corrosive in a single-stage absorption chiller environment.

  16. CX-013614: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Offsite Lease Extension and Continued Operation of the Joint Bioenergy Institute and the Advanced Biofuels Process Development Unit LB-CX-15-05 CX(s) Applied: B1.24, B3.6Date: 03/24/2015 Location(s): CaliforniaOffices(s): Berkeley Site Office

  17. CX-013613: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Construction and Operation of the Integrative Genomics Building at the Lawrence Berkeley National Laboratory LB-CX-15-03 CX(s) Applied: B1.15, B1.24, B1.33, B3.6, B3.12, B3.15Date: 04/21/2015Location(s): CaliforniaOffices(s): Berkeley Site Office

  18. CX-013612: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    LUX-ZEPLIN (LZ) Dark Matter Project LB-CX-15-04 CX(s) Applied: B1.15, B1.31, B3.6Date: 05/08/2015Location(s): CaliforniaOffices(s): Berkeley Site Office

  19. Lattice Boltzmann modeling of boiling heat transfer: The boiling curve and the effects of wettability

    SciTech Connect (OSTI)

    Li, Q.; Kang, Q. J.; Francois, M. M.; He, Y. L.; Luo, K. H.

    2015-03-03

    A hybrid thermal lattice Boltzmann (LB) model is presented to simulate thermal multiphase flows with phase change based on an improved pseudopotential LB approach (Li et al., 2013). The present model does not suffer from the spurious term caused by the forcing-term effect, which was encountered in some previous thermal LB models for liquid–vapor phase change. Using the model, the liquid–vapor boiling process is simulated. The boiling curve together with the three boiling stages (nucleate boiling, transition boiling, and film boiling) is numerically reproduced in the LB community for the first time. The numerical results show that the basic features and the fundamental characteristics of boiling heat transfer are well captured, such as the severe fluctuation of transient heat flux in the transition boiling and the feature that the maximum heat transfer coefficient lies at a lower wall superheat than that of the maximum heat flux. Moreover, the effects of the heating surface wettability on boiling heat transfer are investigated. It is found that an increase in contact angle promotes the onset of boiling but reduces the critical heat flux, and makes the boiling process enter into the film boiling regime at a lower wall superheat, which is consistent with the findings from experimental studies.

  20. New methods of nozzle attachment to FRP spray headers

    SciTech Connect (OSTI)

    Boucher, E.J.

    1995-06-01

    The traditional method of attaching spray nozzles to FRP spray headers in the absorber tower of a wet limestone system has been through the use of 150 lb. Flanges. This paper will illustrate two additional methods (grooved adapters & adhesive bonded nozzles) and will demonstrate the cost saving associated versus the flanged option, as well as the advantages and disadvantages of each system.

  1. Fermentation pattern of sucrose to ethanol conversions by Zymomonas mobilis

    SciTech Connect (OSTI)

    Lyness, E.; Doelle, H.W.

    1981-07-01

    General patterns of sucrose fermentation by two strains of Zymomonas mobilis, designated Z7 and Z10, were established using sucrose concentrations from 50 to 200 g/liter. Strain Z7 showed a higher invertase activity than Z10. Strain Z10 showed a reduced specific growth rate at high sucrose concentrations while Z7 was unaffected. High sucrose hydrolyzing activity in strain Z7 lead to glucose accumulation in the medium at high sucrose concentrations. Ethanol production and fermentation time depend on the rate of catabolism of the products of sucrose hydrolysis, glucose and fructose. The metabolic quotients for sucrose utilization, qs, and ethanol production, qp (g/g.hr), are unsuitable for describing sucrose utilization by Zymomonas mobilis as the logarithmic phase of growth precedes the phase of highest substrate utilization (g/liter.hr) and ethanol production (g/liter.hr) in batch culture. (Refs. 10).

  2. Liquid Hydrogen Absorber for MICE

    SciTech Connect (OSTI)

    Ishimoto, S.; Suzuki, S.; Yoshida, M.; Green, Michael A.; Kuno, Y.; Lau, Wing

    2010-05-30

    Liquid hydrogen absorbers for the Muon Ionization Cooling Experiment (MICE) have been developed, and the first absorber has been tested at KEK. In the preliminary test at KEK we have successfully filled the absorber with {approx}2 liters of liquid hydrogen. The measured hydrogen condensation speed was 2.5 liters/day at 1.0 bar. No hydrogen leakage to vacuum was found between 300 K and 20 K. The MICE experiment includes three AFC (absorber focusing coil) modules, each containing a 21 liter liquid hydrogen absorber made of aluminum. The AFC module has safety windows to separate its vacuum from that of neighboring modules. Liquid hydrogen is supplied from a cryocooler with cooling power 1.5 W at 4.2 K. The first absorber will be assembled in the AFC module and installed in MICE at RAL.

  3. Cellulose fermentation by an asporogenous mutant and an ethanol-tolerant mutant of Clostridium thermocellum

    SciTech Connect (OSTI)

    Tailliez, P.; Girard, H.; Longin, R.; Beguin, P.; Millet, J. )

    1989-01-01

    Two mutants of Clostridium thermocellum were isolated after UV light mutagenesis. Mutant A1, selected as asporogenous, exhibited a fermentation pattern similar to that of the wild type. However, at pH 6.5, the mutant degraded 12% more cellulose than did the wild type, leading to enhanced ethanol production. Mutant 647, selected as ethanol tolerant, was able to grow in medium containing 4% ethanol. During the early stage of the exponential growth phase, ethanol was produced as the main product, up to a concentration of about 9 g/liter. After 3 days of culture, 48.3 g (89% of the initial amount) of degraded cellulose per liter was fermented into 12.7 g of ethanol per liter.

  4. untitled

    National Nuclear Security Administration (NNSA)

    DRAFT ENVIRONMENTAL ASSESSMENT FOR THE TRANSFER OF THE KANSAS CITY PLANT, KANSAS CITY, MISSOURI U.S. Department of Energy National Nuclear Security Administration February 2013 DOE/EA-1947 CONVERSION FACTORS Metric to English English to Metric Multiply by To get Multiply by To get Area Square kilometers 247.1 Acres Square kilometers 0.3861 Square miles Square meters 10.764 Square feet Concentration Kilograms/sq. meter 0.16667 Tons/acre Milligrams/liter 1 a Parts/million Micrograms/liter 1 a

  5. Construction of a bioluminescent reporter strain to detect polychlorinated biphenyls

    SciTech Connect (OSTI)

    Layton, A.C.; Muccini, M.; Ghosh, M.M.; Sayler, G.S.

    1998-12-01

    A bioluminescent reporter strain, Ralstonia eutropha ENV307 (pUTK60), was constructed for the detection of polychlorinated biphenyls by inserting the biphenyl promoter upstream of the bioluminescence genes. In the presence of a nonionic surfactant, which enhances the solubility of chlorinated biphenyls, bioluminescence was induced three- to fourfold over background by biphenyl, monochlorinated biphenyls, and Aroclor 1242. The minimum detection limits for these compounds ranged from 0.15 mg/liter for 4-chlorobiphenyl to 1.5 mg/liter for Aroclor 1242.

  6. Current Status of the WArP Experiment

    SciTech Connect (OSTI)

    Szelc, A. M.

    2009-04-17

    The WArP Collaboration is getting ready to run the WArP 100 liter detector in the Underground laboratory in Gran Sasso, Italy. The new detector, scheduled to run in 2008, should improve the current sensitivity limits by a factor of 10. Meanwhile, an active R and D program is being conducted. The highlights of this program, namely the runs with Argon depleted in the radioactive isotope {sup 39}Ar currently in preparation and the measurements of the effects of contamination with Nitrogen and Oxygen on the Liquid Argon effective light yield will be presented as well as the current status of the 100 liter detector.

  7. CO-FIRING COAL: FEEDLOT AND LITTER BIOMASS (CFB AND CLB) FUELS IN PULVERIZED FUEL AND FIXED BED BURNERS

    SciTech Connect (OSTI)

    Kalyan Annamalai; John Sweeten; Saqib Mukhtar; Ben Thein; Gengsheng Wei; Soyuz Priyadarsan; Senthil Arumugam; Kevin Heflin

    2003-08-28

    Intensive animal feeding operations create large amounts of animal waste that must be safely disposed of in order to avoid environmental degradation. Cattle feedlots and chicken houses are two examples. In feedlots, cattle are confined to small pens and fed a high calorie grain-diet diet in preparation for slaughter. In chicken houses, thousands of chickens are kept in close proximity. In both of these operations, millions of tons of manure are produced every year. The manure could be used as a fuel by mixing it with coal in a 90:10 blend and firing it in an existing coal suspension fired combustion systems. This technique is known as co-firing, and the high temperatures produced by the coal will allow the biomass to be completely combusted. Reburn is a process where a small percentage of fuel called reburn fuel is injected above the NO{sub x} producing, conventional coal fired burners in order to reduce NO{sub x}. The manure could also be used as reburn fuel for reducing NO{sub x} in coal fired plants. An alternate approach of using animal waste is to adopt the gasification process using a fixed bed gasifier and then use the gases for firing in gas turbine combustors. In this report, the cattle manure is referred to as feedlot biomass (FB) and chicken manure as litter biomass (LB). The report generates data on FB and LB fuel characteristics. Co-firing, reburn, and gasification tests of coal, FB, LB, coal: FB blends, and coal: LB blends and modeling on cofiring, reburn systems and economics of use of FB and LB have also been conducted. The biomass fuels are higher in ash, lower in heat content, higher in moisture, and higher in nitrogen and sulfur (which can cause air pollution) compared to coal. Small-scale cofiring experiments revealed that the biomass blends can be successfully fired, and NO{sub x} emissions will be similar to or lower than pollutant emissions when firing coal. Further experiments showed that biomass is twice or more effective than coal when used in a reburning process. Computer simulations for coal: LB blends were performed by modifying an existing computer code to include the drying and phosphorus (P) oxidation models. The gasification studies revealed that there is bed agglomeration in the case of chicken litter biomass due to its higher alkaline oxide content in the ash. Finally, the results of the economic analysis show that considerable fuel cost savings can be achieved with the use of biomass. In the case of higher ash and moisture biomass, the fuel cost savings is reduced.

  8. Advanced In-Furnace NOx Control for Wall and Cyclone-Fired Boilers

    SciTech Connect (OSTI)

    Hamid Sarv

    2009-02-28

    A NO{sub x} minimization strategy for coal-burning wall-fired and cyclone boilers was developed that included deep air staging, innovative oxygen use, reburning, and advanced combustion control enhancements. Computational fluid dynamics modeling was applied to refine and select the best arrangements. Pilot-scale tests were conducted by firing an eastern high-volatile bituminous Pittsburgh No.8 coal at 5 million Btu/hr in a facility that was set up with two-level overfire air (OFA) ports. In the wall-fired mode, pulverized coal was burned in a geometrically scaled down version of the B and W DRB-4Z{reg_sign} low-NO{sub x} burner. At a fixed overall excess air level of 17%, NO{sub x} emissions with single-level OFA ports were around 0.32 lb/million Btu at 0.80 burner stoichiometry. Two-level OFA operation lowered the NO{sub x} levels to 0.25 lb/million Btu. Oxygen enrichment in the staged burner reduced the NO{sub x} values to 0.21 lb/million Btu. Oxygen enrichment plus reburning and 2-level OFA operation further curbed the NO{sub x} emissions to 0.19 lb/million Btu or by 41% from conventional air-staged operation with single-level OFA ports. In the cyclone firing arrangement, oxygen enrichment of the cyclone combustor enabled high-temperature and deeply staged operation while maintaining good slag tapping. Firing the Pittsburgh No.8 coal in the optimum arrangement generated 112 ppmv NO{sub x} (0.15 lb/million Btu) and 59 ppmv CO. The optimum emissions results represent 88% NO{sub x} reduction from the uncontrolled operation. Levelized costs for additional NO{sub x} removal by various in-furnace control methods in reference wall-fired or cyclone-fired units already equipped with single-level OFA ports were estimated and compared with figures for SCR systems achieving 0.1 lb NO{sub x}/10{sup 6} Btu. Two-level OFA ports could offer the most economical approach for moderate NO{sub x} control, especially for smaller units. O{sub 2} enrichment in combination with 2-level OFA was not cost effective for wall-firing. For cyclone units, NO{sub x} removal by two-level OFA plus O{sub 2} enrichment but without coal reburning was economically attractive.

  9. DEVELOPMENT OF CONTINUOUS SOLVENT EXTRACTION PROCESSES FOR COAL DERIVED CARBON PRODUCTS

    SciTech Connect (OSTI)

    Elliot B. Kennel; Quentin C. Berg; Stephen P. Carpenter; Dady Dadyburjor; Jason C. Hissam; Manoj Katakdaunde; Liviu Magean; Abha Saddawi; Alfred H. Stiller; John W. Zondlo

    2006-03-07

    The purpose of this DOE-funded effort is to develop continuous processes for solvent extraction of coal for the production of carbon products. The largest applications are those which support metals smelting, such as anodes for aluminum smelting and electrodes for arc furnaces. Other carbon products include materials used in creating fuels for the Direct Carbon Fuel Cell, metals smelting, especially in the aluminum and steel industries, as well as porous carbon structural material referred to as ''carbon foam'' and carbon fibers. During this reporting period, efforts have focused on the development of carbon electrodes for Direct Carbon Fuel Cells (DCFC), and on carbon foam composites used in ballistic armor, as well as the hydrotreatment of solvents used in the basic solvent extraction process. A major goal is the production of 1500 pounds of binder pitch, corresponding to about 3000 pounds of hydrotreated solvent.

  10. Flexural support member having a high ratio of lateral-to-axial stiffness

    DOE Patents [OSTI]

    Haas, W.M.B.

    1983-06-23

    A convoluted flexible support structure is provided which is capable of supplying a lateral to axial spring rate in excess of 1000 to 1. A support member in the form of a steel disc having a specified number of rather large radius, concentric convolutions and a thickness in the range of from about 0.01 to 0.02 inch has an axial stiffness of about 50 pounds/inch while the lateral stiffness is about 100,000 pounds/inch. The support member may be used to support a vibration device where the lateral motion of the vibrator must be highly restricted while providing relatively free axial displacement of about +-0.25 inch.

  11. Flexural support member having a high ratio of lateral-to-axial stiffness

    DOE Patents [OSTI]

    Haas, Wendall M. B.

    1985-01-01

    A convoluted flexible support structure is provided which is capable of supplying a lateral to axial spring rate in excess of 1,000 to 1. A support member in the form of a steel disc having a specified number of rather large radius, concentric convolutions and a thickness in the range of from about 0.01 to 0.02 inch has an axial stiffness of about 50 pounds/inch while the lateral stiffness is about 100,000 pounds/inch. The support member may be used to support a vibration device where the lateral motion of the vibrator must be highly restricted while providing relatively free axial displacement of about .+-.0.25 inch.

  12. 2015 Uranium Marketing Annual Report

    U.S. Energy Information Administration (EIA) Indexed Site

    1 2015 Uranium Marketing Annual Report Release Date: May 24, 2016 Next Release Date: May 2017 thousand pounds U 3 O 8 equivalent 2011 2012 2013 2014 P2015 Owners and operators of U.S. civilian nuclear power reactors 89,835 97,647 113,007 114,046 120,857 U.S. brokers and traders 6,841 5,677 7,926 5,916 5,678 U.S. converter, enrichers, fabricators, and producers 15,428 17,611 13,416 12,766 9,388 Total commercial inventories 112,104 120,936 134,418 132,728 135,923 thousand pounds U 3 O 8 equivalent

  13. Market values summary/August market review/current market data

    SciTech Connect (OSTI)

    1994-09-01

    This article is the August 1994 uranium market summary. There were 16 deals in the natural uranium market. The restricted exchange value dropped slightly to $9.10 per pound U3O8, while the unrestricted exchange value remained steady at $7.10. Similarly, the restricted UF6 value eased to $29.30 kgU as UF6, and the unrestricted value remained constant at $24.50. The restricted transaction value declined slightly to $9.15 per pound U3O8, while the unrestricted value increased to $7.15. Both active supply and demand increased by a comparable amount. The unrestricted SWU value was unchanged, but the restricted value decreased by a dollar to $86 per SWU.

  14. Market values summary/April market review/current market data

    SciTech Connect (OSTI)

    1994-05-01

    This article is the April 1994 uranium market summary. The near-term market was slow, with three near-term deals for concentrates and none for UF6. This was reflected in the decline of the concentrates restricted value $9.30 per pound U3O8 and the UF6 restricted value to $29.75 per kgU as UF6. In each market, the unrestricted value remained unchanged at $7.00 and $24.50 due to the lack of trades in the unrestricted market. Transaction values in both the restricted and unrestricted market were constant at $9.45 and $7.05 per pound U3O8. The restricted SWU value rose a dollar to $88 per SWU, and the unrestricted SWU value remained steady at $67 per SWU. Active demand continued to decrease, while active supply increased.

  15. Market values summary/December market review/current market data

    SciTech Connect (OSTI)

    1994-01-01

    This article is the December 1993 uranium market summary. During this period, there were six deals in the restricted concentrates market and none in the unrestricted market. The restricted value dropped slightly to $9.85 per pound U3O8, while the unrestricted market rose slightly to $7.00. The UF6 market was also slow, with a slight decrease in the restricted UF6 value to $31.00 and no change in the unrestricted value ($24.00). The unrestricted transaction value was $7.15 per pound U3O8, and the restricted value was $10.25. In the enrichment services market, the unrestricted SWU value remained fixed at $68.00 per SWU, while the unrestricted value increased by a dollar to $84.00 per SWU. Active uranium supply decreased, while active demand increased.

  16. INEEL Lead Recycling in a Moratorium Environment

    SciTech Connect (OSTI)

    Kooda, K. E.; Galloway, K.; McCray, C. W.; Aitken, D. W.

    2003-02-26

    Since 1999, the Idaho National Engineering and Environmental Laboratory (INEEL) Lead Project successfully recycled over 700,000 pounds of excess INEEL lead to the private sector. On February 14, 2000, the Secretary of Energy, Bill Richardson, formalized the January 12, 2000, moratorium on recycling radioactive scrap metal that prevented the unrestricted release of recycled scrap metals to the private sector. This moratorium created significant problems for the INEEL lead recycling program and associated plans; however, through the cooperative efforts of the INEEL and Idaho State University as well as innovative planning and creative thinking the recycling issues were resolved. This collaboration has recycled over 160,000 pounds of excess lead to Idaho State University with a cost savings of over $.5M.

  17. INEEL Lead Recycling in a Moratorium Environment

    SciTech Connect (OSTI)

    Kooda, Kevin Evan; Mc Cray, Casey William; Aitken, Darren William; Galloway, Kelly

    2003-02-01

    Since 1999, the Idaho National Engineering and Environmental Laboratory (INEEL) Lead Project successfully recycled over 700,000 pounds of excess INEEL lead to the private sector. On February 14, 2000, the Secretary of Energy, Bill Richardson, formalized the January 12, 2000, moratorium on recycling radioactive scrap metal that prevented the unrestricted release of recycled scrap metals to the private sector. This moratorium created significant problems for the INEEL lead recycling program and associated plans; however, through the cooperative efforts of the INEEL and Idaho State University as well as innovative planning and creative thinking the recycling issues were resolved. This collaboration has recycled over 160,000 pounds of excess lead to Idaho State University with a cost savings of over $.5M.

  18. Method, system and computer program product for monitoring and optimizing fluid extraction from geologic strata

    DOE Patents [OSTI]

    Medizade, Masoud; Ridgely, John Robert

    2009-12-15

    An arrangement which utilizes an inexpensive flap valve/flow transducer combination and a simple local supervisory control system to monitor and/or control the operation of a positive displacement pump used to extract petroleum from geologic strata. The local supervisory control system controls the operation of an electric motor which drives a reciprocating positive displacement pump so as to maximize the volume of petroleum extracted from the well per pump stroke while minimizing electricity usage and pump-off situations. By reducing the electrical demand and pump-off (i.e., "pounding" or "fluid pound") occurrences, operating and maintenance costs should be reduced sufficiently to allow petroleum recovery from marginally productive petroleum fields. The local supervisory control system includes one or more applications to at least collect flow signal data generated during operation of the positive displacement pump. No flow, low flow and flow duration are easily evaluated using the flap valve/flow transducer arrangement.

  19. Autoclave nuclear criticality safety analysis

    SciTech Connect (OSTI)

    D`Aquila, D.M.; Tayloe, R.W. Jr.

    1991-12-31

    Steam-heated autoclaves are used in gaseous diffusion uranium enrichment plants to heat large cylinders of UF{sub 6}. Nuclear criticality safety for these autoclaves is evaluated. To enhance criticality safety, systems are incorporated into the design of autoclaves to limit the amount of water present. These safety systems also increase the likelihood that any UF{sub 6} inadvertently released from a cylinder into an autoclave is not released to the environment. Up to 140 pounds of water can be held up in large autoclaves. This mass of water is sufficient to support a nuclear criticality when optimally combined with 125 pounds of UF{sub 6} enriched to 5 percent U{sup 235}. However, water in autoclaves is widely dispersed as condensed droplets and vapor, and is extremely unlikely to form a critical configuration with released UF{sub 6}.

  20. A unique gun application for both high velocity and low velocity projectiles in a standard 155mm long tom gun

    SciTech Connect (OSTI)

    Garcia, J.R.

    1990-01-01

    The Terminal Ballistics Facility at Sandia National Laboratores in Albuquerque, New Mexico has developed an inexpensive and reliable capability for environmental testing of nuclear and kinetic energy weapon systems using the standard military 155 mm long tom gun. An unusual priming technique and charge configuration developed by Sandia National laboratories provides repeatable results such that payloads may be launched outside of the normal operating regime (both high and low) for the 155 mm gun. A 15 pound payload was reliably launched at 1000 fps with a breech pressure of 3000 psi. Another 20 pound payload was reliably launched to 5000 fps with a breech pressure of 50000 psi. A detailed description of charge configuration and test results is presented. 21 figs., 4 tabs.

  1. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    9. Foreign purchases of uranium by U.S. suppliers and owners and operators of U.S. civilian nuclear power reactors by delivery year, 2010-14 thousand pounds U3O8 equivalent; dollars per pound U3O8 equivalent Deliveries 2010 2011 2012 2013 2014 U.S. suppliers Foreign purchases 24,985 19,318 20,196 23,233 24,199 Weighted-average price 41.30 48.80 46.80 43.25 39.13 Owners and operators of U.S. civilian nuclear power reactors Foreign purchases 30,362 35,071 36,037 34,095 34,404 Weighted-average

  2. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    . Uranium purchased by owners and operators of U.S. civilian nuclear power reactors by origin and delivery year, 2010-14 thousand pounds U3O8 equivalent; dollars per pound U3O8 equivalent Deliveries 2010 2011 2012 2013 2014 U.S.-Origin Uranium Purchases 3,687 5,205 9,807 9,484 3,316 Weighted-Average Price 45.25 52.12 59.44 56.37 48.11 Foreign-Origin Uranium Purchases 42,895 49,626 47,713 47,919 50,033 Weighted-Average Price 49.64 55.98 54.07 51.13 46.03 Total Purchases 46,582 54,831 57,520

  3. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    0. U.S. broker and trader purchases of uranium by origin, supplier, and delivery year, 2010-14 thousand pounds U3O8 equivalent; dollars per pound U3O8 equivalent Deliveries 2010 2011 2012 2013 2014 Received U.S.-origin uranium Purchases 2,226 1,668 1,194 W 410 Weighted-average price 43.36 54.85 51.78 W 33.55 Received foreign-origin uranium Purchases 27,186 24,695 24,606 W 28,743 Weighted-average price 41.42 49.69 47.75 W 38.42 Total received by U.S. brokers and traders Purchases 29,412 26,363

  4. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    1. Foreign sales of uranium from U.S. suppliers and owners and operators of U.S. civilian nuclear power reactors by origin and delivery year, 2010-14 thousands pounds U3O8 equivalent; dollars per pound U3O8 equivalent Deliveries to foreign suppliers and utilities 2010 2011 2012 2013 2014 U.S.-origin uranium Foreign sales 3,440 4,387 4,798 4,148 4,210 Weighted-average price 37.82 53.08 47.53 43.10 32.91 Foreign-origin uranium Foreign sales 19,708 12,297 13,185 14,717 15,794 Weighted-Average Price

  5. Uranium Marketing Annual Report - Release Date: May 31, 2011

    Gasoline and Diesel Fuel Update (EIA)

    4. Uranium purchased by owners and operators of U.S. civilian nuclear power reactors by origin and material type, 2014 deliveries thousand pounds U3O8 equivalent; dollars per pound U3O8 equivalent Deliveries Uranium concentrate Natural UF6 Enriched UF6 Total U.S.-origin uranium Purchases 2,004 1,312 0 3,316 Weighted-average price 49.87 45.41 -- 48.11 Foreign-origin uranium Purchases 27,257 16,491 6,285 50,033 Weighted-average price 44.56 48.98 44.69 46.03 Total Purchases 29,260 17,803 6,285

  6. 2015 Domestic Uranium Production Report

    U.S. Energy Information Administration (EIA) Indexed Site

    Domestic Uranium Production Report 2015 Domestic Uranium Production Report Release Date: May 5, 2016 Next Release Date: May 2017 Activity at U.S. Mills and In-Situ-Leach Plants 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 Ore from Underground Mines and Stockpiles Fed to Mills 1 0 W W W 0 W W W W W W W 0 Other Feed Materials 2 W W W W W W W W W W W W W Total Mill Feed W W W W W W W W W W W W W (thousand pounds U 3 O 8 ) W W W W W W W W W W W W W (thousand pounds U 3 O 8 ) W W

  7. Stainless steel quadralatch finger test report

    SciTech Connect (OSTI)

    Deichelbohrer, P.R.

    1996-06-20

    The design of the quadralatch on the universal samplers was changed in response to flammable gas operating constraints. Additional redesign of the fingers was included to facilitate manufacturability. The new design was tested to assure satisfactory performance. It was shown that the fingers can hold a sampler in place with an upward force of at least 2200 N (500 pounds) and that the mechanical remote latch unit can release the quadralatch under this condition of maximum upward force.

  8. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Biodiesel Tax Exemption Biodiesel blends containing at least 20% biodiesel derived from used cooking oil are exempt from the $0.30 per gallon state fuel excise tax. The exemption does not apply to fuel used in vehicles with a gross vehicle weight rating of 26,001 pounds or more, fuel not sold in retail operations, or fuel sold in operations involving fleet fueling or bulk sales. The exemption expires after December 31, 2019. (Reference Oregon Revised Statutes 319.530

  9. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Alternative Fuel Excise Tax Compressed natural gas motor fuel is subject to the state fuel excise tax at the rate of $0.30 per 120 cubic feet, measured at 14.73 pounds per square inch and 60 degrees Fahrenheit. Propane motor fuel is subject to the excise tax $0.30 per 1.3 gallons at 60 degrees Fahrenheit. (Reference Oregon Revised Statutes 319.530

  10. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Idle Reduction Requirement A vehicle may not idle for more than five minutes from April through October in cities and counties where the local government has signed a Memorandum of Agreement with the Texas Commission on Environmental Quality (TCEQ). Exemptions apply for the following: vehicles with a gross vehicle weight rating (GVWR) of 14,000 pounds (lbs.) or less; emergency or law enforcement vehicles; airport ground support vehicles; rented/leased vehicles; to perform needed work, including

  11. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Tire Inflation Requirement The California Air Resources Board (ARB) enforces regulations to reduce greenhouse gas emissions from vehicles operating inefficiently with under inflated tires. These regulations apply to vehicles with a gross vehicle weight rating of 10,000 pounds or less. Automotive service providers performing or offering to perform automotive maintenance or repair services in the state must: Check and inflate vehicle tires to the manufacturer recommended tire pressure rating, with

  12. Ulrich Wiesner > Spencer T. Olin Professor of Engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nuclear Security Administration US, Kazakhstan Cooperate to Eliminate Highly Enriched Uranium January 07, 2015 WASHINGTON D.C - The Department of Energy's National Nuclear Security Administration (DOE/NNSA) announced today the removal of 36 kilograms (approximately 80 pounds) of highly enriched uranium (HEU) spent fuel from the Institute of Nuclear Physics (INP) in Almaty, Kazakhstan. The HEU was transported via two air shipments to a secure facility in Russia for permanent disposition. This

  13. SAS Output

    U.S. Energy Information Administration (EIA) Indexed Site

    1. Sulfur Dioxide Uncontrolled Emission Factors Fuel, Code, Source and Emission Units Combustion System Type / Firing Configuration Fuel EIA Fuel Code Source and Tables (As Appropriate) Emissions Units Lbs = Pounds MMCF = Million Cubic Feet MG = Thousand Gallons Cyclone Firing Boiler Fluidized Bed Firing Boiler Stoker Boiler Tangential Firing Boiler All Other Boiler Types Combustion Turbine Internal Combustion Engine Distillate Fuel Oil* DFO Source: 2, Table 3.1-2a, 3.4-1 & 1.3-1 Lbs per MG

  14. SAS Output

    U.S. Energy Information Administration (EIA) Indexed Site

    2. Nitrogen Oxides Uncontrolled Emission Factors Fuel, Code, Source and Emission Units Combustion System Type / Firing Configuration Tangential Boiler All Other Boiler Types Fuel EIA Fuel Code Source and Tables (As Appropriate) Emissions Units Lbs = Pounds MMCF = Million Cubic Feet MG = Thousand Gallons Cyclone Firing Boiler Fluidized Bed Firing Boiler Stoker Boiler Dry-Bottom Boilers Wet-Bottom Boilers Dry-Bottom Boilers Wet-Bottom Boilers Combustion Turbine Internal Combustion Engine

  15. The 800-meter sample toroidal field conductor

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    800-meter sample toroidal field conductor was transferred to a container ship at the port of Charleston, S.C., on May 28, 2014 for its voyage to La Spezia, Italy. Photo: US ITER INSIDE: ITER Site Progress View from DOE US ITER Systems Update Hearing on Fusion Energy Disruption Mitigation Team Reviews Progress Engaging Industry, Universities and Labs Central Solenoid Fabrication Upcoming Events US ITER Ships Over 30,000 Pounds of Magnet System Hardware to Europe ITER is a unique international

  16. The Ames Laboratory Creating Materials and Energy Solutions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Steve Karsjen, Director, Public Affairs 111 TASF Ames, IA 50011 karsjen@ameslab.gov 515-294-5643 THE AMES LABORATORY STORY... Then We began in 1942 as part of the Manhattan Project. The Ames Project at Iowa State College, under the leadership of materials experts Frank Spedding and Harley Wilhelm, developed a uranium-purification process so efficient and cost effective it's still in use today. The Ames Project provided two million pounds of high- purity uranium to the Manhattan Project. After

  17. Quick-setting concrete and a method for making quick-setting concrete

    DOE Patents [OSTI]

    Wagh, Arun S. (Joliet, IL); Singh, Dileep (Westmont, IL); Pullockaran, Jose D. (Trenton, NJ); Knox, Lerry (Glen Ellyn, IL)

    1997-01-01

    A method for producing quick setting concrete is provided comprising hydrng a concrete dry mixture with carbonate solution to create a slurry, and allowing the slurry to cure. The invention also provides for a quick setting concrete having a predetermined proportion of CaCO.sub.3 of between 5 and 23 weight percent of the entire concrete mixture, and whereby the concrete has a compression strength of approximately 4,000 pounds per square inch (psi) within 24 hours after pouring.

  18. The Ames Project (1942-1946)

    ScienceCinema (OSTI)

    None

    2013-06-05

    The Ames Laboratory was officially founded on May 17, 1947, following development of a process to purify uranium metal for the historic Manhattan Project. From 1942 to 1946, Ames Lab scientists produced over two-million pounds of uranium metal. A U.S. Department of Energy national research laboratory, the Ames Laboratory creates materials and energy solutions. Iowa State University operates Ames Laboratory under contract with the DOE.

  19. LANL Distinguished Postdoc Fellows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Conducts Watusi Experiment LANL Conducts Watusi Experiment Nevada Test Site, NV The Los Alamos National Laboratory conducts Watusi, a spectacular high-explosives experiment with a yield equivalent to about 37,000 pounds of TNT, at the Nevada Test Site's Big Explosive Experimental Facility (BEEF). The experiment seeks to demonstrate that existing seismic and infrasound sensors at the test site and across the West used when DOE was conducting underground nuclear tests still can detect and

  20. Market Research Survey of Commercial Off-The-Shelf (COTS) Portable MS Systems for IAEA Safeguards Applications

    SciTech Connect (OSTI)

    Hart, Garret L.; Hager, George J.; Barinaga, Charles J.; Duckworth, Douglas C.

    2013-02-01

    This report summarizes the results for the market research survey of mass spectrometers that are deemed pertinent to International Atomic Energy Agency (IAEA) needs and strategic objectives. The focus of the report is on MS instruments that represent currently available (or soon to be) commercial off-the shelf (COTS) technology and weigh less than 400 pounds. A compilation of all available MS instruments (36 COTS and 2 R&D) is presented, along with pertinent information regarding each instrument.

  1. Development of a non-propagating explosives storage cabinet

    SciTech Connect (OSTI)

    Couch, W.A. ); Schneider, B.A. . Engineering Research Inst.)

    1991-08-01

    Sandia National Laboratories, Albuquerque (SNL) has completed the design of an Explosive Components Facility (ECF). Construction of the ECF is scheduled to begin in 1992 with completion in 1995. An integral part of the ECF will be on-site storage of explosives in six earth-covered service magazines. Each magazine will contain a non-propagating Explosives Storage Cabinet (ESC) system made up to twenty modular units. In addition to the secure storage of explosives, a primary purpose of the cabinet system is to prevent a sympathetic detonation of the explosives stored in the surrounding units as a result of an accidental detonation of up to 5.0 pounds of explosives (TNT equivalent) stored in a donor'' unit in the cabinet. Therefore, the maximum creditable event'' for each service magazine is 5.0 pounds, even though each magazine could contain up to 100 pounds of explosives stored in 5.0 pounds increments. A new material being developed at the New Mexico Engineering Research Institute (NMERI) known as SIFCON (Slurry Infiltrated Fiber CONcrete), had been shown to be highly resistant to back spall from blast loadings, and penetration by high-velocity ballistic projectiles and fragments. These, and other characteristics unique to SIFCON, such as very high strength and ductility, appeared to make it an excellent candidate material for the modular units of the ESC. In 1989 SNL contracted with NMERI to develop a SIFCON modular unit for the ESC. Based upon the success of Phase 1 program, a more extensive Phase 2 program was undertaken in 1990 and has been successfully completed. This paper is a summary of the Phase 1 and Phase 2 work, which includes the design, fabrication, and explosive testing of the modular units.

  2. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Heat Content of Natural Gas Consumed Definitions Key Terms Definition British Thermal Unit (Btu) The quantity of heat required to raise the temperature of 1 pound of liquid water by 1 degree Fahrenheit at the temperature at which water has its greatest density (approximately 39 degrees Fahrenheit). Delivered to Consumers (Heat Content) Heat content of residential, commercial, industrial, vehicle fuel and electric power deliveries to consumers. Electric Power (Heat Content) Heat content of

  3. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Supplemental Supplies Definitions Key Terms Definition Biomass Gas A medium Btu gas containing methane and carbon dioxide, resulting from the action of microorganisms on organic materials such as a landfill. Blast-furnace Gas The waste combustible gas generated in a blast furnace when iron ore is being reduced with coke to metallic iron. It is commonly used as a fuel within steel works. British Thermal Unit (Btu) The quantity of heat required to raise the temperature of 1 pound of liquid water

  4. Nevada Site Office News News Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    July 24, 2012 morgan@nv.doe.gov NNSA Conducts Third Seismic Source Physics Experiment The National Nuclear Security Administration (NNSA) announced today that it has successfully conducted the third seismic Source Physics Experiment (SPE-3) at the Nevada National Security Site (NNSS). The seismic experiment was the third in a series of seven underground, fully-coupled, high- explosive field tests. SPE-3 included detonating a chemical explosive equivalent to 2,200 pounds of TNT in a contained,

  5. Evaluating the Role of Prophylactic Gastrostomy Tube Placement Prior to Definitive Chemoradiotherapy for Head and Neck Cancer

    SciTech Connect (OSTI)

    Chen, Allen M.; Li Baoqing; Lau, Derick H.; Farwell, D. Gregory; Luu, Quang; Stuart, Kerri; Newman, Kathleen; Purdy, James A.; Vijayakumar, Srinivasan M.D.

    2010-11-15

    Purpose: To determine the effect of prophylactic gastrostomy tube (GT) placement on acute and long-term outcome for patients treated with definitive chemoradiotherapy for locally advanced head and neck cancer. Methods and Materials: One hundred twenty consecutive patients were treated with chemoradiotherapy for Stage III/IV head and neck cancer to a median dose of 70 Gy (range, 64-74 Gy). The most common primary site was the oropharynx (66 patients). Sixty-seven patients (56%) were treated using intensity-modulated radiotherapy (IMRT). Seventy patients (58%) received prophylactic GT placement at the discretion of the physician before initiation of chemoradiotherapy. Results: Prophylactic GT placement significantly reduced weight loss during radiation therapy from 43 pounds (range, 0 to 76 pounds) to 19 pounds (range, 0 to 51 pounds), which corresponded to a net change of -14% (range, 0% to -30%) and -8% (range, +1% to -22%) from baseline, respectively (p < 0.001). However, the proportion of patients who were GT-dependent at 6- and 12-months after treatment was 41% and 21%, respectively, compared with 8% and 0%, respectively, for those with and without prophylactic GT (p < 0.001). Additionally, prophylactic GT was associated with a significantly higher incidence of late esophageal stricture compared with those who did not have prophylactic GT (30% vs. 6%, p < 0.001). Conclusions: Although prophylactic GT placement was effective at preventing acute weight loss and the need for intravenous hydration, it was also associated with significantly higher rates of late esophageal toxicity. The benefits of this strategy must be balanced with the risks.

  6. environment | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    environment Pantex makes paper into compost Every year, NNSA's Pantex Plant uses thousands of pounds of paper that must be destroyed to protect sensitive information. For the vast majority of that paper, a trip through the shredder is not the end of its purpose, but only a beginning. After spending a few weeks composting in a pile of feedlot... DOE celebrates Earth Day DOE today celebrated Earth Day with Community Day on the DOE Pavilion. More than 20 local green exhibitors, including various

  7. russia | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    russia NNSA Partnership Successfully Removes All Remaining HEU from Uzbekistan WASHINGTON, DC - Today, the Department of Energy's National Nuclear Security Administration (DOE/NNSA) announced the successful return of the final 5 kilograms (approximately 11 pounds) of highly enriched uranium (HEU) spent fuel from the IIN-3M "Foton" research reactor in Tashkent, Uzbekistan to... US, Kazakhstan Cooperate to Eliminate Highly Enriched Uranium WASHINGTON D.C - The Department of Energy's

  8. October 22, 2014 | Center for Gas SeparationsRelevant to Clean Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    October 2010 October 2010 October 29, 2010 In this issue: NNSA Senior Leadership Team in Place NNSA Completes Largest Fuel Return Campaign 32 Years of Reactor Conversion NNSA Committed to Energy Efficiency, Savings NNSA Nonproliferation Program Develops Cutting-edge Dental Implant Technology Pantex Authorized to Begin Work on B53 Big Month for National Ignition Facility DOE Collects 120,000 Pounds of Food for "Feds Feed Families" Campaign NNSA's Kansas City Plant Meets Major Milestone

  9. Dynamics of Molecular Clouds: Observations, Simulations, and NIF

    Office of Scientific and Technical Information (OSTI)

    Experiments (Conference) | SciTech Connect Conference: Dynamics of Molecular Clouds: Observations, Simulations, and NIF Experiments Citation Details In-Document Search Title: Dynamics of Molecular Clouds: Observations, Simulations, and NIF Experiments Authors: Kane, J O ; Martinez, D A ; Pound, M W ; Heeter, R F ; Casner, A ; Mancini, R C Publication Date: 2015-01-16 OSTI Identifier: 1179389 Report Number(s): LLNL-CONF-666498 DOE Contract Number: DE-AC52-07NA27344 Resource Type: Conference

  10. request.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    removal US, Kazakhstan Cooperate to Eliminate Highly Enriched Uranium WASHINGTON D.C - The Department of Energy's National Nuclear Security Administration (DOE/NNSA) announced today the removal of 36 kilograms (approximately 80 pounds) of highly enriched uranium (HEU) spent fuel from the Institute of Nuclear Physics (INP) in Almaty, Kazakhstan. The HEU was

    render safe Nuclear Forensics The National Technical Nuclear Forensics (NTNF) program is a Homeland Security Council and National Security

  11. Performance characteristics of the Lysholm engine as tested for geothermal power applications

    SciTech Connect (OSTI)

    Steidel, R.F. Jr.; Pankow, D.; Berger, R.E.

    1981-08-01

    This is a description of the performance tests of the Lysholm engine which have recently been completed at the University of California, Berkeley. The Lysholm engine is a rotary displacement engine which can accept and expand a mixed-phase water-steam mixture. As a thermodynamic process, mixed-phase expansion has the potential for using significantly more of the available energy output per pound of fluid. 6 refs.

  12. Biodegradable plastics from potato waste double savings to environment

    SciTech Connect (OSTI)

    Coleman, R. )

    1990-11-01

    Plastics can be made from starchy food waste. This article describes a method by which these plastics break down into harmless chemicals when exposed to sunlight, water or bacteria. Degradable trash bags and agricultural mulch films can replace some of the millions of pounds of nondegradable plastics used each year. Researchers at Argonne National Laboratory developed that involves enzymatically converting potato waste into glucose, fermenting the glucose to lactic acid using bacteria, and then using the lactic acid to construct fully degradable plastics.

  13. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Idle Reduction Technology Weight Exemption States may allow heavy-duty vehicles equipped with idle reduction technology to exceed the maximum gross vehicle weight limit and the axle weight limit by up to 550 pounds to compensate for the additional weight of the idle reduction technology. This allowance does not impact state highway funding eligibility. (Reference Public Law 112-141 and 23 U.S. Code 127(a)(12)

  14. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Natural Gas Vehicle (NGV) Weight Exemption NGVs may exceed the federal maximum gross vehicle weight limit by an amount equal to the difference of the weight of the natural gas tank and fueling system and the weight of a comparable diesel tank and fueling system. The NGV must not exceed a maximum gross vehicle weight of 82,000 pounds. (Reference Public Law 114-94, 2015, and 23 U.S. Code 127(s)

  15. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Idle Reduction Weight Exemption A commercial vehicle equipped with qualified idle reduction technology may exceed the state's gross, total axle, or bridge formula vehicle weight limits by up to 400 pounds to compensate for the additional weight of the idle reduction technology. Upon request, vehicle operators must provide proof that the idle reduction technology is fully functional. (Reference Alaska Administrative Code 17.25.01

  16. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Alternative Fuel Tax An excise tax rate of 9% of the average wholesale price on a per gallon basis applies to all special fuels, including diesel, natural gas, liquefied petroleum gas (propane), ethanol, biodiesel, hydrogen, and any other combustible gases and liquids, excluding gasoline, used to propel motor vehicles. For taxation purposes, one gasoline gallon equivalent (GGE) of compressed natural gas (CNG) is equal to 5.66 pounds (lbs.) or 126.67 cubic feet. One GGE of liquefied natural gas

  17. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Idle Reduction Weight Exemption A commercial vehicle equipped with idle reduction technology may exceed the state's gross, total axle, total tandem, or bridge formula vehicle weight limits by up to 550 pounds to compensate for the additional weight of the idle reduction technology. The additional weight may not exceed the actual weight of the idle reduction unit. (Reference Connecticut General Statutes 14-267c

  18. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Idle Reduction Weight Exemption Any motor vehicle equipped with idle reduction technology may exceed the gross vehicle or internal bridge weight by the amount equal to the certified weight of the idle reduction technology, up to 550 pounds. To be eligible, the operator must present written verification of the weight of the idle reduction technology and demonstrate that it is fully functional at all times. (Reference Florida Statutes 316.54

  19. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Natural Gas Vehicle (NGV) and Fueling Infrastructure Grants The Texas Commission on Environmental Quality (TCEQ) administers the NGV Grant Program (Program) as part of the Texas Emissions Reduction Plan. The Program provides grants to replace existing medium- and heavy-duty vehicles with new, converted, or repowered NGVs. Qualifying vehicles must be on-road vehicles with a gross vehicle weight rating of more than 8,500 pounds and must be certified to current federal emissions standards. Grant

  20. DOE - Office of Legacy Management -- Heppanstall Co - PA 19

    Office of Legacy Management (LM)

    Heppanstall Co - PA 19 FUSRAP Considered Sites Site: Heppanstall Co. (PA.19 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: Tippens Inc. PA.19-1 Location: 4620 Hatfield Street , Pittsburgh , Pennsylvania PA.19-4 Evaluation Year: 1987 PA.19-2 Site Operations: Forged approximately 100,000 pounds of uranium during a six month period in 1955. PA.19-1 Site Disposition: Eliminated - Potential for contamination remote. Radiological screening survey

  1. Summary - Major Risk Factors Integrated Facility Disposition Project (IFDP) Oak Ridge, TN

    Office of Environmental Management (EM)

    & ORNL, Oak Ridge, TN EM Project: Integrated Facility Disposition Project (IFDP) ETR Report Date: August 2008 ETR-15 United States Department of Energy Office of Environmental Management (DOE-EM) External Technical Review of the Major Risk Factors Integrated Facility Disposition Project (IFDP) Oak Ridge, TN Why DOE-EM Did This Review Approximately two million pounds of mercury are unaccounted for at Y-12 and mercury contamination has been detected in both soils and groundwater. The IFDP will

  2. NNSA Partnership Successfully Removes All Remaining HEU from Uzbekistan |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration Partnership Successfully Removes All Remaining HEU from Uzbekistan September 29, 2015 WASHINGTON, DC - Today, the Department of Energy's National Nuclear Security Administration (DOE/NNSA) announced the successful return of the final 5 kilograms (approximately 11 pounds) of highly enriched uranium (HEU) spent fuel from the IIN-3M "Foton" research reactor in Tashkent, Uzbekistan to Russia. This is the eighth shipment of HEU from Uzbekistan

  3. LEAKAGE TESTING METHOD

    DOE Patents [OSTI]

    McAdams, Wm.A.; Foss, M.H.

    1958-08-12

    A method of testing containers for leaks is described, particularly the testing of containers or cans in which the uranium slugs for nuelear reactors are jacketed. This method involves the immersion of the can in water under l50 pounds of pressure, then removing, drying, and coating the can with anhydrous copper sulfate. Amy water absorbed by the can under pressure will exude and discolor the copper sulfate in the area about the leak.

  4. Method of servicing wellbores

    SciTech Connect (OSTI)

    Pasztor, A.J.; Stauffer, R.C.

    1981-12-08

    The servicing of wellbores with a high density fluid to maintain an elevated pressure on a portion of the formation penetrated by the well is improved. The improvement comprises injecting as the high density fluid a substantially solids-free aqueous solution of calcium bromide and zinc bromide having a density of at least about 15 pounds per gallon. The aqueous solution is prepared by reacting hydrogen bromide with zinc or compounds of zinc in the presence of an aqueous calcium bromide solution.

  5. Viscous heavy brines

    SciTech Connect (OSTI)

    House, R.F.; Hoover, L.D.

    1984-07-10

    Hydroxyethyl cellulose and a sequestrant are added to a heavy brine containing one or more salts selected from calcium chloride, calcium bromide, and zinc bromide to increase the viscosity of the brine. Preferably the brine contains zinc bromide, has a density in the range from about 14.2-19.2 pounds per gallon, and the sequestrant is a polyphosphonic acid or water soluble salt thereof.

  6. Method of servicing wellbores

    SciTech Connect (OSTI)

    Stauffer, R. C.; Pasztor, A. J.

    1984-12-25

    The servicing of wellbores with a high density fluid to maintain an elevated pressure on a portion of the formation penetrated by the well is improved. The improvement comprises injecting as the high density fluid a substantially solids-free aqueous solution of calcium bromide and zinc bromide having a density of at least about 15 pounds per gallon. The aqueous solution is prepared by reacting hydrogen bromide with zinc or compounds of zinc in the presence of an aqueous calcium bromide solution.

  7. Hanford Blog Archive - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    August 2014 August 12, 2014 NEWS RELEASE: Contractor Removes More Than 650 Pounds of Contamination from Groundwater For a second year in a row, and four months ahead of schedule, CH2M HILL Plateau Remediation Company exceeded the Department of Energy's annual goal. August 11, 2014 NEWS RELEASE: Workers Creating Demolition Zone at Hanford's Plutonium Finishing Plant Over the last few weeks, the look of Hanford's main plutonium plant has changed as crews have removed or demolished eight buildings

  8. Assumptions to the Annual Energy Outlook 2015

    U.S. Energy Information Administration (EIA) Indexed Site

    72 Transportation Demand Module The NEMS Transportation Demand Module estimates transportation energy consumption across the nine Census Divisions (see Figure 5) and over ten fuel types. Each fuel type is modeled according to fuel-specific and associated technology attributes applicable by transportation mode. Total transportation energy consumption is the sum of energy use in eight transport modes: light-duty vehicles (cars and light trucks), commercial light trucks (8,501-10,000 pounds gross

  9. info disclosure-rocky mts

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NCSL/State and Tribal Government Working Group Appendix CLOSURE FOR THE SEVENTH GENERATION A REPORT FROM THE STEWARDSHIP COMMITTEE OF THE STATE AND TRIBAL GOVERNMENT WORKING GROUP National Conference of State Legislatures William T. Pound, Executive Director 1560 Broadway, Suite 700 Denver, Colorado 80202 (303) 830-2200 444 North Capitol Street, N.W. Washington, D.C. 20001 (202) 624-5400 February 1999 Closure for the Seventh Generation 2 NCSL/State and Tribal Government Working Group This book

  10. March market review. [Spot market prices for uranium (1993)

    SciTech Connect (OSTI)

    Not Available

    1993-04-01

    The spot market price for uranium in unrestricted markets weakened further during March, and at month end, the NUEXCO Exchange Value had fallen $0.15, to $7.45 per pound U3O8. The Restricted American Market Penalty (RAMP) for concentrates increased $0.15, to $2.55 per pound U3O8. Ample UF6 supplies and limited demand led to a $0.50 decrease in the UF6 Value, to $25.00 per kgU as UF6, while the RAMP for UF6 increased $0.75, to $5.25 per kgU. Nine near-term uranium transactions were reported, totalling almost 3.3 million pounds equivalent U3O8. This is the largest monthly spot market volume since October 1992, and is double the volume reported in January and February. The March 31 Conversion Value was $4.25 per kgU as UF6. Beginning with the March 31 Value, NUEXCO now reports its Conversion Value in US dollars per kilogram of uranium (US$/kgU), reflecting current industry practice. The March loan market was inactive with no transactions reported. The Loan Rate remained unchanged at 3.0 percent per annum. Low demand and increased competition among sellers led to a one-dollar decrease in the SWU Value, to $65 per SWU, and the RAMP for SWU declined one dollar, to $9 per SWU.

  11. Comprehensive report to Congress: Clean Coal Technology Program: Blast furnace granulated coal injection system demonstration project: A project proposed by: Bethlehem Steel Corporation

    SciTech Connect (OSTI)

    Not Available

    1990-10-01

    Bethlehem Steel Corporation (BSC), of Bethlehem, Pennsylvania, has requested financial assistance from DOE for the design, construction, and operation of a 2800-ton-per-day blast furnace granulated coal injection (BFGCI) system for each of two existing iron-making blast furnaces. The blast furnaces are located at BSC's facilities in Burns Harbor, Indiana. BFGCI technology involves injecting coal directly into an iron-making blast furnace and subsequently reduces the need for coke on approximately a pound of coke for pound of coal basis. BFGCI also increases blast furnace production. Coke will be replaced with direct coal injection at a rate of up to 400 pounds per NTHM. The reducing environment of the blast furnace enables all of the sulfur in the coal to be captured by the slag and hot metal. The gases exiting the blast furnace are cleaned by cyclones and then wet scrubbing to remove particulates. The cleaned blast furnace gas is then used as a fuel in plant processes. There is no measurable sulfur in the off gas. The primary environmental benefits derived from blast furnace coal injection result from the reduction of coke requirements for iron making. Reduced coke production will result in reduced releases of environmental contaminants from coking operations. 5 figs.

  12. Potential value of Cs-137 capsules

    SciTech Connect (OSTI)

    Bloomster, C.H.; Brown, D.R.; Bruno, G.A.; Hazelton, R.F.; Hendrickson, P.L.; Lezberg, A.J.; Tingey, G.L.; Wilfert, G.L.

    1985-04-01

    We determined the value of Cs-137 compared to Co-60 as a source for the irradiation of fruit (apples and cherries), pork and medical supplies. Cs-137, in the WESF capsule form, had a value of approximately $0.40/Ci as a substitute for Co-60 priced at approximately $1.00/Ci. The comparison was based on the available curies emitted from the surface of each capsule. We developed preliminary designs for fourteen irradiation facilities; seven were based on Co-60 and seven were based on Cs-137. These designs provided the basis for estimating capital and operating costs which, in turn, provided the basis for determining the value of Cs-137 relative to Co-60 in these applications. We evaluated the effect of the size of the irradiation facility on the value of Cs-137. The cost of irradiation is low compared to the value of the product. Irradiation of apples for disinfestation costs $.01 to .02 per pound. Irradiation for trichina-safe pork costs $.02 per pound. Irradiation of medical supplies for sterilization costs $.07 to .12 per pound. The cost of the irradiation source, either Co-60 or Cs-137, contributed only a minor amount to the total cost of irradiation, about 5% for the fruit and hog cases and about 20% for the medical supply cases. We analyzed the sensitivity of the irradiation costs and Cs-137 value to several key assumptions.

  13. Ozone transport commission developments

    SciTech Connect (OSTI)

    Joyce, K.M.

    1995-08-01

    On September 27, 1994, the states of the Ozone Transport Commission (OTC) signed an important memorandum of understanding (MOU) agreeing to develop a regional strategy for controlling stationary sources of nitrogen oxide emissions. Specifically, the states of the Ozone Transport Region, OTR, agreed to propose regulations for the control of NOx emissions from boilers and other indirect heat exchangers with a maximum gross heat input rate of at least 250 million BTU per hour. The Ozone Transport Region was divided into Inner, Outer and Northern Zones. States in the Outer Zone agreed to reduce NOx emissions by 55%. States in the Inner Zone agreed to reduce NOx emissions 65%. Facilities in both zones have the option to emit NOx at a rate no greater than 0.2 pounds per million Btu by May 1, 1999. This option provides fairness for the gas-fired plants which already have relatively low NOx emissions. Additionally, States in the Inner and Outer Zones agreed to reduce their NOx emissions by 75% or to emit NOx at a rate no greater than 0.15 pounds per million BTU by May 1, 2003. The Northern Zone States agree to reduce their rate of NOx emissions by 55% from base year levels by May 1, 2003, or to emit NOx at a rate no greater than 0.2 pounds per million BTU. As part of this MOU, States also agreed to develop a regionwide trading mechanism to provide a cost-effective mechanism for implementing the reductions.

  14. A PACIFIC-WIDE GEOTHERMAL RESEARCH LABORATORY: THE PUNA GEOTHERMAL RESEARCH FACILITY

    SciTech Connect (OSTI)

    Takahashi, P.; Seki, A.; Chen, B.

    1985-01-22

    The Hawaii Geothermal Project (HGP-A) well, located in the Kilauea volcano east rift zone, was drilled to a depth of 6450 feet in 1976. It is considered to be one of the hot-test producing geothermal wells in the world. This single well provides 52,800 pounds per hour of 371 F and 160 pounds per square inch-absolute (psia) steam to a 3-megawatt power plant, while the separated brine is discharged in percolating ponds. About 50,000 pounds per hour of 368 F and 155 psia brine is discharged. Geothermal energy development has increased steadily in Hawaii since the completion of HGP-A in 1976: (1) a 3 megawatt power plant at HGP-A was completed and has been operating since 1981; (2) Hawaiian Electric Company (HECO) has requested that their next increment in power production be from geothermal steam; (3) three development consortia are actively, or in the process of, drilling geothermal exploration wells on the Big Island; and (4) engineering work on the development of a 400 megawatt undersea cable for energy transmission is continuing, with exploratory discussions being initiated on other alternatives such as hydrogen. The purpose for establishing the Puna Geothermal Research Facility (PGRF) is multifold. PGRF provides a facility in Puna for high technology research, development, and demonstration in geothermal and related activities; initiate an industrial park development; and examine multi-purpose dehydration and biomass applications related to geothermal energy utilization.

  15. Prompt radiation-induced conductivity in polyurethane foam and glass microballoons

    SciTech Connect (OSTI)

    Hartman, E. Frederick; Zarick, Thomas Andrew; Sheridan, Timothy J.; Preston, Eric F.

    2014-06-01

    We performed measurements and analyses of the prompt radiation-induced conductivity (RIC) in thin samples of polyurethane foam and glass microballoon foam at the Little Mountain Medusa LINAC facility in Ogden, UT. The RIC coefficient was non-linear with dose rate for polyurethane foam; however, typical values at 1E11 rad(si)/s dose rate was measured as 0.8E-11 mho/m/rad/s for 5 lb./cu ft. foam and 0.3E-11 mho/m/rad/s for 10 lb./cu ft. density polyurethane foam. For encapsulated glass microballoons (GMB) the RIC coefficient was approximately 1E-15 mho/m/rad/s and was not a strong function of dose rate.

  16. Enhanced Combustion Low NOx Pulverized Coal Burner

    SciTech Connect (OSTI)

    Ray Chamberland; Aku Raino; David Towle

    2006-09-30

    For more than two decades, ALSTOM Power Inc. (ALSTOM) has developed a range of low cost, in-furnace technologies for NOx emissions control for the domestic U.S. pulverized coal fired boiler market. This includes ALSTOM's internally developed TFS 2000 firing system, and various enhancements to it developed in concert with the U.S. Department of Energy (DOE). As of 2004, more than 200 units representing approximately 75,000 MWe of domestic coal fired capacity have been retrofit with ALSTOM low NOx technology. Best of class emissions range from 0.18 lb/MMBtu for bituminous coals to 0.10 lb/MMBtu for subbituminous coals, with typical levels at 0.24 lb/MMBtu and 0.13 lb/MMBtu, respectively. Despite these gains, NOx emissions limits in the U.S. continue to ratchet down for new and existing (retrofit) boiler equipment. If enacted, proposed Clear Skies legislation will, by 2008, require an average, effective, domestic NOx emissions rate of 0.16 lb/MMBtu, which number will be reduced to 0.13 lb/MMBtu by 2018. Such levels represent a 60% and 67% reduction, respectively, from the effective 2000 level of 0.40 lb/MMBtu. Low cost solutions to meet such regulations, and in particular those that can avoid the need for a costly selective catalytic reduction system (SCR), provide a strong incentive to continue to improve low NOx firing system technology to meet current and anticipated NOx control regulations. In light of these needs, ALSTOM, in cooperation with the DOE, is developing an enhanced combustion, low NOx pulverized coal burner which, when integrated with ALSTOM's state-of-the-art, globally air staged low NOx firing systems, will provide a means to achieve less than 0.15 lb/MMBtu NOx at less than 3/4 the cost of an SCR with low to no impact on balance of plant issues when firing a high volatile bituminous coal. Such coals can be more economic to fire than subbituminous or Powder River Basin (PRB) coals, but are more problematic from a NOx control standpoint as existing firing system technologies do not provide a means to meet current or anticipated regulations absent the use of an SCR. The DOE/ALSTOM program performed large pilot scale combustion testing in ALSTOM's Industrial Scale Burner Facility (ISBF) at its U.S. Power Plant Laboratories facility in Windsor, Connecticut. During this work, the near-field combustion environment was optimized to maximize NOx reduction while minimizing the impact on unburned carbon in ash, slagging and fouling, corrosion, and flame stability/turn-down under globally reducing conditions. Initially, ALSTOM utilized computational fluid dynamic modeling to evaluate a series of burner and/or near field stoichiometry controls in order to screen promising design concepts in advance of the large pilot scale testing. The third and final test, to be executed, will utilize several variants of the best nozzle tip configuration and compare performance with 3 different coals. The fuels to be tested will cover a wide range of coals commonly fired at US utilities. The completion of this work will provide sufficient data to allow ALSTOM to design, construct, and demonstrate a commercial version of an enhanced combustion low NOx pulverized coal burner. A preliminary cost/performance analysis of the developed enhanced combustion low NOx burner applied to ALSTOM's state-of-the-art TFS 2000 firing system was performed to show that the burner enhancements is a cost effective means to reduce NOx.

  17. The OSHA and EPA programs on preventing chemical accidents and potential applications in the photovoltaic industry

    SciTech Connect (OSTI)

    Fthenakis, V.M.

    1996-08-01

    OSHA issued in 1992, the Process Safety Management (PSM) of Highly Hazardous Substances. This rule requires owners/operators of facilities that handle hazardous chemicals in quantities greater than the listed thresholds to establish all the elements of a PSM. EPA has issued in June 1996, the rules for a Risk Management Program which also refers to specific substances and threshold quantities. These rules are applicable to all the facilities that use or store any of 139 regulated substances at quantities ranging from 100 lb to 10,000 lb. The RMP rule covers off-site hazards, while the OSHA Process Safety Management (PSM) rule covers worker safety issues within the plant boundary. Some of the listed substances may be found in photovoltaic manufacturing facilities. This brief report presents the basic elements of these two rules and discusses their potential applicability in the photovoltaic industry.

  18. Biogas production from anaerobic digestion of Spirulina maxima algal biomass

    SciTech Connect (OSTI)

    Samson, R.; LeDuy, A.

    1982-08-01

    The semimicroscopic blue-green alga Spirulina maxima makes an ideal substrate for anaerobic digestion because it is easy to harvest, it can use carbon dioxide from the atmosphere as its carbon source, and its fermentability is higher than that of other small algae. Digestion experiments demonstrated that S. maxima can serve as the sole nutrient for biogas production and that municipal sewage sludge, when adapted to this new substrate, is very stable. During semicontinuous daily-fed trials under non-optimal conditions at an 0.06 lb volatile solids (VS)/ft/sup 3/ (0.97 kg VS/m/sup 3/) loading rate, 33-day retention time, and 86/sup 0/F (30/sup 0/C) digestion temperature, the daily methane yield was 4.2 CF/lb (0.26 m/sup 3//kg) VS added, which represents 47% of the maximum theoretical yield. Studies on optimizing the process are underway.

  19. Containment of explosions in spherical vessels

    SciTech Connect (OSTI)

    Duffey, T.A.; Greene, J.M. ); Baker, W.E. . Dept. of Mechanical Engineering); Lewis, B.B. )

    1992-01-01

    A correlation of the experimentally recorded dynamic response of a spherical containment vessel with theoretical finite element calculations is presented. Three experiments were performed on the 6-ft-diameter steel vessel using centrally located 12-lb. and 40-lb. high explosive charges. Pressure-time loading on the inner wall of the vessel was recorded for each test using pressure transducers. Resulting dynamic response of the vessel was recorded for each test using strain gages mounted at selected locations on the outer surface of the vessel. Response of the vessel was primarily elastic. A finite element model of the vessel was run using DYNA3D, a dynamic structural analysis code. Pressure loading for the finite element model was based on results from a one-dimensional reactive hydrodynamics code. Correlations between experiments and analysis were generally good for the tests for frequency and strain magnitude at most locations. Comparisons of experimental and calculated pressure-time histories were less satisfactory.

  20. Containment of explosions in spherical vessels

    SciTech Connect (OSTI)

    Duffey, T.A.; Greene, J.M.; Baker, W.E.; Lewis, B.B.

    1992-12-31

    A correlation of the experimentally recorded dynamic response of a spherical containment vessel with theoretical finite element calculations is presented. Three experiments were performed on the 6-ft-diameter steel vessel using centrally located 12-lb. and 40-lb. high explosive charges. Pressure-time loading on the inner wall of the vessel was recorded for each test using pressure transducers. Resulting dynamic response of the vessel was recorded for each test using strain gages mounted at selected locations on the outer surface of the vessel. Response of the vessel was primarily elastic. A finite element model of the vessel was run using DYNA3D, a dynamic structural analysis code. Pressure loading for the finite element model was based on results from a one-dimensional reactive hydrodynamics code. Correlations between experiments and analysis were generally good for the tests for frequency and strain magnitude at most locations. Comparisons of experimental and calculated pressure-time histories were less satisfactory.

  1. Low-Cost Phase Change Material for Building Envelopes

    SciTech Connect (OSTI)

    Abhari, Ramin

    2015-08-06

    A low-cost PCM process consisting of conversion of fats and oils to PCM-range paraffins, and subsequent “encapsulation” of the paraffin using conventional plastic compounding/pelletizing equipment was demonstrated. The PCM pellets produced were field-tested in a building envelope application. This involved combining the PCM pellets with cellulose insulation, whereby 33% reduction in peak heat flux and 12% reduction in heat gain was observed (average summertime performance). The selling price of the PCM pellets produced according to this low-cost process is expected to be in the $1.50-$3.00/lb range, compared to current encapsulated PCM price of about $7.00/lb. Whole-building simulations using corresponding PCM thermal analysis data suggest a payback time of 8 to 16 years (at current energy prices) for an attic insulation retrofit project in the Phoenix climate area.

  2. 11th LANSCE School on Neutron Scattering | Lecturers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lecturer Abstracts (Tentative) Lectures are primarily given by outside experts relevant to this year's topic. John Ankner | Oak Ridge National Laboratory John Ankner, Oak Ridge National Laboratory Studies of Polyelectrolyte Multilayers with the SNS Liquids Reflectometer Abstract: Layer-by-Layer (LbL) assembly performed via alternating adsorption of water-soluble polymers at surfaces enables fabrication of films on almost any substrate, with nano-scale control over film composition, structure,

  3. Exposure Evaluation Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Exposure Evaluation Process for Tank Farm Workers L.B. Sandy Rock, MD, MPH Risk Communication HPMC Occupational Medical Services An increase in the number of tank farm vapor exposures has led to many questions and concerns among workers and management. * During regular clinic hours, HPMC OMS is responsible for the medical evaluation of workers reporting exposure to vapors. * At other times, workers are taken to Kadlec Hospital which has an arrangement with DOE/HPMC OMS to evaluate, treat, refer

  4. February

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    February /newsroom/_assets/images/newsroom-icon.jpg February We are your source for reliable, up-to-date news and information; our scientists and engineers can provide technical insights on our innovations for a secure nation. Chrysochromulina tobin cell structure. (A) Scanning electron micrograph of C. tobin. Two flagella are visible (marked F) along with the prominent coiled haptonema (white arrow). Scale bar represents 2.5 microns. (B) Electron micrograph of whole cell: Lipid body (LB);

  5. Structural insights into the metabolism of 2-chlorodibenzofuran by an evolved biphenyl dioxygenase

    SciTech Connect (OSTI)

    Kumar, Pravindra; Department of Biotechnology, Indian Institute of Technology, Roorkee 247667 ; Mohammadi, Mahmood; Dhindwal, Sonali; Pham, Thi Thanh My; Bolin, Jeffrey T.; Sylvestre, Michel

    2012-05-18

    Highlights: Black-Right-Pointing-Pointer Regiospecificity of BphAE{sub RR41} toward dibenzofuran and 2-chlorodibenzofuran differs. Black-Right-Pointing-Pointer We compared the structures of the substrate-bound forms of the enzyme with both substrates. Black-Right-Pointing-Pointer Dibenzofuran is compelled to move during the catalytic reaction. Black-Right-Pointing-Pointer Ser283 contact with 2-chlorodibenzofuran helps prevent substrate movement during the reaction. -- Abstract: The biphenyl dioxygenase of Burkholderia xenovorans LB400 (BphAE{sub LB400}) is a Rieske-type oxygenase that catalyzes the stereospecific oxygenation of many heterocyclic aromatics including dibenzofuran. In a previous work, we evolved BphAE{sub LB400} and obtained BphAE{sub RR41}. This variant metabolizes dibenzofuran and 2-chlorodibenzofuran more efficiently than BphAE{sub LB400}. However, the regiospecificity of BphAE{sub RR41} toward these substrates differs. Dibenzofuran is metabolized principally through a lateral dioxygenation whereas 2-chlorodibenzofuran is metabolized principally through an angular dioxygenation. In order to explain this difference, we examined the crystal structures of both substrate-bound forms of BphAE{sub RR41} obtained under anaerobic conditions. This structure analysis, in combination with biochemical data for a Ser283Gly mutant provided evidences that the substrate is compelled to move after oxygen-binding in BphAE{sub RR41}:dibenzofuran. In BphAE{sub RR41}:2-chlorodibenzofuran, the chlorine atom is close to the side chain of Ser283. This contact is missing in the BphAE{sub RR41}:dibenzofuran, and strong enough in the BphAE{sub RR41}:2-chlorodibenzofuran to help prevent substrate movement during the catalytic reaction.

  6. Microstructure evolution in the fusion welding of heat-treatable Al-Cu-Li alloys. Ph.D. Thesis

    SciTech Connect (OSTI)

    Hou, K.

    1994-01-01

    Aluminum alloys 2090 and 2195 and Al-2.5Cu were welded autogenously using the gas tungsten-arc (GTA) and CO2 laser beam (LB) welding processes. Relationships between microstructure and mechanical properties in the fusion zone (FZ) and the heat-affected zone (HAZ) in both the as-welded and the postweld heat-treated conditions were studied. Solute segregation due to non-equilibrium solidification in the FZ and its effect on precipitation after postweld aging was quantitatively investigated. After aging treatment, precipitates were found surrounding eutectic regions where higher solute content was measured. Fast cooling LB weld exhibited narrower solute enriched regions and narrower precipitate segregation zones (PSZ`s) adjacent to the eutectic. A partial recovery of strength and hardness in the FZ`s was achieved by postweld aging at 160 C and 190 C for 16 hours. A higher Li/Cu ratio in 2090 promoted the formation of uniformly distributed delta(prime) precipitates in the as-welded HAZ. An evident reduction in the FZ ductility occurred in the 2195 LB welds due to the existence of porosity and shrinkage cavities, and the constraint effect from narrower FZ`s. GTA welds in both 2090 and 2195 alloys exhibited a hardness recovery in the near HAZ, which was not obvious in the LB welds. Postweld aging enhanced this hardness variation. Overaging, dissolution and reprecipitation of various strengthening precipitates occurred in the different regions of the HAZ, and consequently induced the hardness variation. Higher heat inputs increased the HAZ width and enhanced the hardness increase in the near HAZ. Aged HAZ microstructure was affected by the precipitation in the as-welded condition. The formation of Li-containing precipitates in the GTA HAZ, especially alpha(prime) in Li-lean 2195, consumed Li from the matrix. Consequently, the precipitation of T1 was affected.

  7. MEMORANDUM OWNER(S)

    Office of Legacy Management (LM)

    OWNER(S) -------- past : Lb-J ' 0-c @+a+~-~% current: -- ________________________ ------7--- -- Owner cantacted 0 yes 4t no; if yes, date contacted TYPE OF OPERATION ----------------- q Research & Development 0 Facility Type 0 Production scale testing 0 Manufacturing 0 Pilat Scale 0 Bench Scale Process i Theoretical Studies Sample & Analysis 0 Production 0 Di5posal/Storage TYPE OF CONTRACT ----_----------- 0 Prime q Subcontractor Cl Purchase Order 0 University 0 Research Organization 0

  8. Research Highlight

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Organic Molecules Explaining New Particle Growth in the Boreal Forest Download a printable PDF Submitter: Thornton, J., University of Washington Area of Research: Aerosol Processes Working Group(s): Aerosol Life Cycle Journal Reference: Ehn M, JA Thornton, E Kleist, M Sipila, H Junninen, I Pullinen, M Springer, F Rubach, R Tillmann, B Lee, F Lopez-Hilfiker, S Andres, I Acir, M Rissanen, T Jokinen, S Schobesberger, J Kangasluoma, J Kontkanen, T Nieminen, T Kurten, LB Nielsen, S Jorgensen, HG

  9. Building a road map for tailoring multilayer polyelectrolyte films (Journal

    Office of Scientific and Technical Information (OSTI)

    Article) | SciTech Connect Building a road map for tailoring multilayer polyelectrolyte films Citation Details In-Document Search Title: Building a road map for tailoring multilayer polyelectrolyte films Researchers are moving a step closer to a definite road map for building layer-by-layer (LbL) assembled polyelectrolyte films, with the assistance of the Liquids Reflectometer at Oak Ridge National Laboratory's Spallation Neutron Source, in Oak Ridge, Tennessee. Scientists using the liquids

  10. Test plan for the M-100 container model M-101/7A/12/90 Docket 96-43-7A, type A container

    SciTech Connect (OSTI)

    Kelly, D.L.

    1997-05-30

    This document describes the test plan for the M-100 Container, Model M-101/7A/12/90. This packaging system is designed to ship Type A solid, radioactive materials, normal form, Form Nos. 1, 2, and 3. The nominal overall dimensions, including risers, of the M-100 Container are 79 x 54 x 42 inches. The capacity of the container is approximately 89.9 ft. The estimated gross weight of the packaging and contents is 9,000 lb.

  11. Development and Demonstration of a Biomass Boiler for Food Processing Applications

    SciTech Connect (OSTI)

    2009-02-01

    Burns & McDonnell Engineering Company, in collaboration with Frito-Lay, Inc., Oak Ridge National Laboratory, CPL Systems, Inc., Alpha Boilers, and Kansas State University will demonstrate use of a biomass boiler in the food processing industry. The 60,000 lb/hr innovative biomass boiler system utilizing a combination of wood waste and tire-derived fuel (TDF) waste will offset all natural gas consumption at Frito-Lay's Topeka, Kansas, processing facility.

  12. METHOD OF REMOVING IODINE FROM GASES AND FILTER MEDIUM THEREFOR

    DOE Patents [OSTI]

    Silverman, L.

    1961-08-01

    A method for the removal of iodine from large gas volumes is described. The gaseous medium is heated to a temperature not exceeding 400 deg C. Water vapor is then added to the medium in approximate amounts of 1 lb/cu ft of the medium. The medium is then passed through a porous copper fibrous pad having deposited thereon a coating of silver, the silver coating being treated with hydrogen sulfide forming a layer of silver sulfide. (AEC)

  13. Potential role of lignin in tomorrow's wood utilization technologies

    SciTech Connect (OSTI)

    Glasser, W.G.

    1981-03-01

    Low-grade timber supplies and wood processing residues are presently converted into paper products, used for fuel, or remain totally unused. Competition for this resource will continue to mount, particularly when manufacturers of chemicals and liquid fuels enter the market with new technologies now under development. The type of technology that concentrates on depolymerization of carbohydrates will generate large quantities of lignin-rich residues. The potential of these lignins to contribute to the economic feasibility of new chemical wood process technologies may involve degradative depolymerization to phenols and benzene, or polymer conversion into a wide variety of dispersants, binders, reinforcing and antioxidizing agents, etc. Where lignin's fuel value lies around 3 to 4 cents/lb. (fall of 1979), its raw material value for phenol is reported to be almost 5 cents/lb., and the value of the polymeric materials is estimated to be between 6 and 20 cents/lb. At the lower end of this range of raw material values are ligninsulfonates, which contribute nearly 98 percent to the approximately 1.5 billion lb./yr. U.S. market for lignin products. Kraft lignins are located at the opposite end of this range. Novel bioconversion-type lignins are expected to be more similar in structure and properties to kraft than to sulfite lignins. Whereas application of the dispersant properties of ligninsulfonates in tertiary oil recovery operations is expected to constitute the most significant use of lignin in terms of volume, adhesive and resin applications hold the greatest promise in terms of value. Both utilization schemes seem to require pretreatments in the form of either polymeric fractionation or chemical modification. Potential savings from the use of polymeric lignins in material systems are great.

  14. Method of testing gas insulated systems for the presence of conducting particles utilizing a gas mixture of nitrogen and sulfur hexafluoride

    DOE Patents [OSTI]

    Wootton, Roy E.

    1979-01-01

    A method of testing a gas insulated system for the presence of conducting particles. The method includes inserting a gaseous mixture comprising about 98 volume percent nitrogen and about 2 volume percent sulfur hexafluoride into the gas insulated system at a pressure greater than 60 lb./sq. in. gauge, and then applying a test voltage to the system. If particles are present within the system, the gaseous mixture will break down, providing an indicator of the presence of the particles.

  15. SEPARATION OF FISSION PRODUCT VALUES FROM THE HEXAVALENT PLUTONIUM BY CARRIER PRECIPITATION

    DOE Patents [OSTI]

    Davies, T.H.

    1959-12-15

    An improved precipitation of fission products on bismuth phosphate from an aqueous mineral acid solution also containing hexavalent plutonium by incorporating, prior to bismuth phosphate precipitation, from 0.05 to 2.5 grams/ liter of zirconium phosphate, niobium oxide. and/or lanthanum fluoride is described. The plutonium remains in solution.

  16. SEPARATION OF FISSION PRODUCTS FROM PLUTONIUM BY PRECIPITATION

    DOE Patents [OSTI]

    Seaborg, G.T.; Thompson, S.G.; Davidson, N.R.

    1959-09-01

    Fission product separation from hexavalent plutonium by bismuth phosphate precipitation of the fission products is described. The precipitation, according to this invention, is improved by coprecipitating ceric and zirconium phosphates (0.05 to 2.5 grams/liter) with the bismuth phosphate.

  17. Alternative fuel trucks case studies: Running refuse haulers on compressed natural gas

    SciTech Connect (OSTI)

    Norton, P.; Kelly, K.

    1996-07-01

    This document details the experience of New York City`s compressed natural gas refuse haulers. These 35 ton vehicles have engines that displace 10 liters and provide 240 horsepower. Fuel economy, range, cost, maintenance, repair issues, and emissions are discussed. Photographs and figures illustrate the attributes of these alternative fuel vehicles.

  18. Selenium in Oklahoma ground water and soil

    SciTech Connect (OSTI)

    Atalay, A.; Vir Maggon, D.

    1991-03-30

    Selenium with a consumption of 2 liters per day (5). The objectives of this study are: (1) to determine the concentrations of Se in Oklahoma ground water and soil samples. (2) to map the geographical distribution of Se species in Oklahoma. (3) to relate groundwater depth, pH and geology with concentration of Se.

  19. Selenium in Oklahoma ground water and soil. Quarterly report No. 6

    SciTech Connect (OSTI)

    Atalay, A.; Vir Maggon, D.

    1991-03-30

    Selenium with a consumption of 2 liters per day (5). The objectives of this study are: (1) to determine the concentrations of Se in Oklahoma ground water and soil samples. (2) to map the geographical distribution of Se species in Oklahoma. (3) to relate groundwater depth, pH and geology with concentration of Se.

  20. RECOVERY OF ACTINIDES FROM AQUEOUS NITRIC ACID SOLUTIONS

    DOE Patents [OSTI]

    Ader, M.

    1963-11-19

    A process of recovering actinides is presented. Tetravalent actinides are extracted from rare earths in an aqueous nitric acid solution with a ketone and back-extracted from the ketone into an aqueous medium. The aqueous actinide solution thus obtained, prior to concentration by boiling, is sparged with steam to reduce its ketone to a maximum content of 3 grams per liter. (AEC)

  1. DOE-HDBK-1122-99; Radiological Control Technician Training

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Step 2 - Build conversion factor(s): 1 liter 0.26418 gallons DOE-HDBK-1122-99 Module 1.02 Unit Analysis & Conversion Instructor's Guide 1.02-10 2000 dpm &27; gal &27; 4.5E&26;7 Ci 1 dpm ...

  2. PRB rail loadings shatter record

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2008-09-15

    Rail transport of coal in the Powder River Basin has expanded, with a record 2,197 trains loaded in a month. Arch Coal's Thunder basin mining complex has expanded by literally bridging the joint line railway. The dry fork mine has also celebrated its safety achievements. 4 photos.

  3. CX-006510: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Development of Large Format Lithium Ion Cells with Higher Energy Density Exceeding 500 Watthours per LiterCX(s) Applied: B3.6Date: 08/25/2011Location(s): San Diego, CaliforniaOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  4. CX-006508: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Development of Large Format Lithium Ion Cells with Higher Energy Density Exceeding 500 Watthours per LiterCX(s) Applied: A1, A8, A9Date: 08/25/2011Location(s): Midland, MichiganOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  5. CX-006506: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Development of Large Format Lithium Ion Cells with Higher Energy Density Exceeding 500 Watthours per LiterCX(s) Applied: B3.6Date: 08/25/2011Location(s): Oak Ridge, TennesseeOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  6. CX-006507: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Development of Large Format Lithium Ion Cells with Higher Energy Density Exceeding 500 Watthours per LiterCX(s) Applied: B3.6Date: 08/25/2011Location(s): Lee's Summit, MissouriOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  7. High density culture of white bass X striped bass fingerlings in raceways using power plant heated effluent

    SciTech Connect (OSTI)

    Collins, C.M.; Burton, G.L.; Schweinforth, R.L.

    1983-06-01

    White bass (Morone chrysops) X striped bass (M. saxatilis) hybrids weighing 1691/lb were initially stocked in five 24 ft/sup 3/ floating screen cages for 20 days. Hybrids averaging one inch in total length and 361 fish/lb were released in four 614 ft/sup 3/ concrete raceways. Two stocking densities, 2.6 and 5.1 fish/ft/sup 3/, were evaluated in the 94-day study using a flow rate of 300 gpm/raceway. Water temperatures averaged 79/sup 0/F and water quality was adequate throughout the production period. Fish were hand fed to satiation daily. Columnaris and Aeromonas hydrophila caused the most serious disease problems. Gas supersaturation was suspect in high mortality levels during cage culture of hybrid bass fry. Cannibalism may have been responsible for unaccountable losses prior to raceway stocking and at harvest. The study yielded 5773 hybrids weighing 658 lb. The high density treatment showed greater weight gain, average weight, average length and percent survival as well as improved food conversion. Results suggest that higher stocking densities and periodic grading may increase production and suppress cannibalism. 10 references, 3 figures, 3 tables.

  8. Radionuclide concentrations in elk that winter on Los Alamos National Laboratory lands. Revision

    SciTech Connect (OSTI)

    Fresquez, P.R.; Armstrong, D.A.; Salazar, J.G.

    1994-07-01

    Elk spend the winter in areas at Los Alamos National Laboratory (LANL) that may contain radioactivity above natural and/or worldwide fallout levels. This study was initiated to determine the levels of {sup 90}Sr, {sup 137}Cs, {sup 238}Pu, {sup 239}Pu, and total uranium in various tissues (brain, hair, heart, jawbone, kidneys, leg bone, liver, and muscle) of adult cow elk that use LANL lands during the fall/winter months. No significant differences in radionuclide contents were detected in any of the tissue samples collected from elk on LANL lands as compared with elk collected from off-site locations. The total effective (radiation) dose equivalent a person would receive from consuming 3.2 lb of heart, 5.6 lb of liver, and 226 lb of muscle from elk that winter on LANL lands, after natural background has been subtracted, was 0.00008, 0.0001, and 0.008 mrem/yr, respectively. The highest dose was less than 0.01% of the International Commission on Radiological Protection permissible dose limit for protecting the public.

  9. Development of a thin steel strip casting process. Final report

    SciTech Connect (OSTI)

    Williams, R.S.

    1994-04-01

    This is a comprehensive effort to develop direct strip casting to the point where a pilot scale program for casting carbon steel strip could be initiated. All important aspects of the technology were being investigated, however the program was terminated early due to a change in the business strategy of the primary contractor, Armco Inc. (focus to be directed at specialty steels, not low carbon steel). At termination, the project was on target on all milestones and under budget. Major part was casting of strip at the experiment casting facility. A new caster, capable of producing direct cast strip of up to 12 in. wide in heats of 1000 and 3000 lb, was used. A total of 81 1000-1200 lb heats were cast as well as one test heat of 3000 lb. Most produced strip of from 0.016 to 0.085 in. thick. Process reliability was excellent for short casting times; quality was generally poor from modern hot strip mill standards, but the practices necessary for good surface quality were identified.

  10. Test and evaluation report for Westinghouse Hanford Company`s 1-L Liquid Shipper, Docket 95-41-7A, Type A container

    SciTech Connect (OSTI)

    Kelly, D.L.

    1995-11-01

    This report documents the U.S. Department of Transportation Specification 7A Type A (DOT-7A) compliance test results of the 1-L Liquid Shipper packaging. The 1-L Liquid Shipper consists of the 3M SafeSend polyethylene canister base and cap with integral sorbent material, a quad ring gasket, a plastic bag, and six foam inserts. A 1-L narrow-mouth, Teflon bottle with Tefzel lid holds contents. The inner bottle is placed inside the SafeSend container. The inner bottle content weight cannot exceed 2000 g (4.4 lb). Total bottle weight, including contents cannot exceed 2167.5 g (4.78 lb). The nominal gross weight of the assembled packaging is to be no more that 3830.5 g (8.4 lb). The approved packaging system is designed to ship Type A quantities of radioactive materials, normal form. Contents may be liquid or solid form. Liquid contents may have a specific gravity less than or equal to (<2). Solid materials are limited in weight, to include packaging, to the gross weight of the as-tested liquids and bottles.

  11. Small heat shock proteins protect against {alpha}-synuclein-induced toxicity and aggregation

    SciTech Connect (OSTI)

    Outeiro, Tiago Fleming [Alzheimer's Research Unit, MassGeneral Institute for Neurodegenerative Disease, MGH, Harvard Medical School, CNY 114, 16th Street, Charlestown, MA 02129 (United States); Klucken, Jochen [Alzheimer's Research Unit, MassGeneral Institute for Neurodegenerative Disease, MGH, Harvard Medical School, CNY 114, 16th Street, Charlestown, MA 02129 (United States); Strathearn, Katherine E. [Department of Medicinal Chemistry and Molecular Pharmacology, Purdue University, West Lafayette, IN 47907-2091 (United States); Liu Fang [Department of Medicinal Chemistry and Molecular Pharmacology, Purdue University, West Lafayette, IN 47907-2091 (United States); Nguyen, Paul [Alzheimer's Research Unit, MassGeneral Institute for Neurodegenerative Disease, MGH, Harvard Medical School, CNY 114, 16th Street, Charlestown, MA 02129 (United States); Rochet, Jean-Christophe [Department of Medicinal Chemistry and Molecular Pharmacology, Purdue University, West Lafayette, IN 47907-2091 (United States); Hyman, Bradley T. [Alzheimer's Research Unit, MassGeneral Institute for Neurodegenerative Disease, MGH, Harvard Medical School, CNY 114, 16th Street, Charlestown, MA 02129 (United States); McLean, Pamela J. [Alzheimer's Research Unit, MassGeneral Institute for Neurodegenerative Disease, MGH, Harvard Medical School, CNY 114, 16th Street, Charlestown, MA 02129 (United States)]. E-mail: touteiro@partners.org

    2006-12-22

    Protein misfolding and inclusion formation are common events in neurodegenerative diseases, such as Parkinson's disease (PD), Alzheimer's disease (AD) or Huntington's disease (HD). {alpha}-Synuclein (aSyn) is the main protein component of inclusions called Lewy bodies (LB) which are pathognomic of PD, Dementia with Lewy bodies (DLB), and other diseases collectively known as LB diseases. Heat shock proteins (HSPs) are one class of the cellular quality control system that mediate protein folding, remodeling, and even disaggregation. Here, we investigated the role of the small heat shock proteins Hsp27 and {alpha}B-crystallin, in LB diseases. We demonstrate, via quantitative PCR, that Hsp27 messenger RNA levels are {approx}2-3-fold higher in DLB cases compared to control. We also show a corresponding increase in Hsp27 protein levels. Furthermore, we found that Hsp27 reduces aSyn-induced toxicity by {approx}80% in a culture model while {alpha}B-crystallin reduces toxicity by {approx}20%. In addition, intracellular inclusions were immunopositive for endogenous Hsp27, and overexpression of this protein reduced aSyn aggregation in a cell culture model.

  12. Microsegregation in high-molybdenum austenitic stainless steel laser beam and gas tungsten arc welds

    SciTech Connect (OSTI)

    Kujanpaeae, V.P.; David, S.A.

    1986-01-01

    An austenitic stainless steel with 6% molybdenum (thickness 6 mm) was welded using laser beam (LB) and gas tungsten arc (GTA) processes at various welding speeds. Depending on the welding speed the primary dendrite spacing ranged from 12 to 17 ..mu..m and from 2 to 7 ..mu..m for the GTA and LB welds, respectively. Extensive segregation of molybdenum was observed in the GTA welds. The segregation ratio for molybdenum, C/sub ID//C/sub D/, was found to be 1.9 in the GTA weld, and 1.2 in the LB weld. Distribution of iron, chromium and nickel was found nearly uniform in both welds. A recovered microstructure was observed after a post-weld annealing heat treatment. Annealing had a profound effect on the molybdenum segregation ratio in the laser weld. The critical pitting temperature (CPT) determined by a standard test was 55/sup 0/C for welds made using both processes, whereas it was 75/sup 0/C for the base metal. Upon homogenization the CPT of the laser beam weld increased to the base metal value, while that of the gas tungsten arc weld remained at 60/sup 0/C.

  13. Lubricant-Infused Nanoparticulate Coatings Assembled by Layer-by-Layer Deposition

    SciTech Connect (OSTI)

    Sunny, S; Vogel, N; Howell, C; Vu, TL; Aizenberg, J

    2014-09-01

    Omniphobic coatings are designed to repel a wide range of liquids without leaving stains on the surface. A practical coating should exhibit stable repellency, show no interference with color or transparency of the underlying substrate and, ideally, be deposited in a simple process on arbitrarily shaped surfaces. We use layer-by-layer (LbL) deposition of negatively charged silica nanoparticles and positively charged polyelectrolytes to create nanoscale surface structures that are further surface-functionalized with fluorinated silanes and infiltrated with fluorinated oil, forming a smooth, highly repellent coating on surfaces of different materials and shapes. We show that four or more LbL cycles introduce sufficient surface roughness to effectively immobilize the lubricant into the nanoporous coating and provide a stable liquid interface that repels water, low-surface-tension liquids and complex fluids. The absence of hierarchical structures and the small size of the silica nanoparticles enables complete transparency of the coating, with light transmittance exceeding that of normal glass. The coating is mechanically robust, maintains its repellency after exposure to continuous flow for several days and prevents adsorption of streptavidin as a model protein. The LbL process is conceptually simple, of low cost, environmentally benign, scalable, automatable and therefore may present an efficient synthetic route to non-fouling materials.

  14. Magneto-dielectric coupling and transport properties of the ferromagnetic-BaTiO{sub 3} composites

    SciTech Connect (OSTI)

    Kumar, Manish E-mail: mkiitbhu2014@gmail.com; Shankar, S. E-mail: mkiitbhu2014@gmail.com; Dwivedi, G. D.; Anshul, A.; Thakur, O. P.; Ghosh, Anup K. E-mail: mkiitbhu2014@gmail.com

    2015-02-16

    Ferromagnetic and large magnetoresistance (MR) nanocomposites of La{sub 0.67}Sr{sub 0.33}MnO{sub 3}-BaTiO{sub 3} (LSMO-BTO) are synthesized via sol-gel route. The X-ray diffraction confirms the existence of two chemically separated phases in the composites. The maximum MR (35%) was achieved in LSMO-5% BTO (LB5). The coupling between the coexisting phases is observed from the dielectric anomaly at the ferromagnetic transition (T{sub c} = 353 K) for LB5 composition. We observed maximum magnetodielectric effect at T{sub c} of 1.18% in magnitude for LB5 and the effect of magnetic field on other composites was significant. These results are related to the large spin polarization within grains as well as at the grain boundaries and the evidence of variation in dielectric parameters with magnetic field reveal the magnetoelectric coupling in LSMO-BTO nanocomposites.

  15. Spreader beam analysis for the CASTOR GSF cask

    SciTech Connect (OSTI)

    Clements, E.P.

    1997-04-07

    The purpose of this report is to document the results of the 150% rated capacity load test performed by DynCorp Hoisting and Rigging on the CASTOR GSF special cask lifting beams. The two lifting beams were originally rated and tested at 20,000kg (44,000lb) by the cask manufacturer in Germany. The testing performed by DynCorp rated and tested the lifting beams to 30,000 kg (66,000 lb) +0%, -5%, for Hanford Site use. The CASTOR GSF cask, used to transport isotopic Heat Sources (canisters), must be lifted with its own designed lifting beam system (Figures 1, 2, and 3). As designed, the beam material is RSt 37-2 (equivalent to American Society for Testing and Materials [ASTM] A-570), the eye plate is St 52-2 (equivalent to ASTM A-516), and the lifting pin is St 50 (equivalent to ASTM A-515). The beam has two opposing 58 mm (2.3 in.) diameter by 120 mm(4.7 in.) length, high grade steel pins that engage the cask for lifting. The pins have a manual locking mechanism to prevent disengagement from the casks. The static, gross weight (loaded) of the cask 18,640 kg (41,000 lb) on the pins prevents movement of the pins during lifting. This is due to the frictional force of the cask on the pins when lifting begins.

  16. Modeling the performance of small capacity lithium bromide-water absorption chiller operated by solar energy

    SciTech Connect (OSTI)

    Saman, N.F.; Sa`id, W.A.D.K.

    1996-12-31

    An analysis of the performance of a solar operated small capacity (two-ton) Lithium Bromide-Water (LiBr-H{sub 2}O) absorption system is conducted. The analysis is based on the first law of thermodynamics with lithium bromide as the absorbent and water as the refrigerant. The effect of various parameters affecting the machine coefficient of performance under various operating conditions is reported. Coefficient of performance of up to 0.8 can be obtained using flat plate solar collectors with generator temperatures in the range of 80--95 C (176--203 F). Liquid heat exchangers with effectiveness based on an NTU of the order of one would be a good design choice. The chiller can save approximately 3,456 kWh/yr per a two-ton unit, and it will reduce emissions by 19 lb of NO{sub x}, 5,870 lb of CO{sub 2}, and 16 lb of SO{sub x} per year per machine.

  17. Technoeconomic evaluation of the extractive fermentation of butanol as a guide to research in this area of biotechnology

    SciTech Connect (OSTI)

    Busche, R.M. )

    1991-09-01

    This report represents the completion of a part of an overall project to evaluate the technical and economic status of several newly conceptualized processes for producing butanol, acetone, acetic acid, and aerobically produced specialty chemicals, which are candidates for research support. The objective of the project are to identify strengths and weaknesses in the proposed and to assist in developing an ongoing research strategy along economically relevant lines. The products to be studied presently comprise a collective US market for 10.7 billion lb valued at $2.8 billion. If their manufacturing processes were converted from petroleum feedstocks to corn, they could consume 556 million bushels. Furthermore, if ethanol could be produced at a low enough price to serve as the precursor to ethylene and butadiene, it an its derivatives could account for 159 billion lb, or 50% of the US production of 316 billion lb of synthetic organic chemicals, presently valued at $113 billion. This use would consume 3.4 billion bushels, or {approximately}45% of the corn crop. In addition, the use of butanol for diesel blends or in jet fuel blends to enhance the range of military aircraft could further increase its market.

  18. The development of an integrated multistage fluid bed retorting process. Technical report, January 1, 1992--March 31, 1992

    SciTech Connect (OSTI)

    Carter, S.; Stehn, J.; Vego, A.; Taulbee, D.

    1992-05-01

    This report summarizes the progress made on the development of an integrated multistage fluidized bed retorting process (KENTORT II) during the period of January 1, 1992 through March 31, 1992. The KENTORT II process includes integral fluidized bed zones for pyrolysis, gasification, and combustion of the oil shale. The purpose of this program is to design and test the KENTORT II process at the 50-lb/hr scale. The design of the 50-lb/hr KENTORT II retort was completed and fabrication is ready to begin. Data from the cold-flow model of the system and operating experience from the 5-lb/hr unit were used as the basis for the design. In another aspect of the program, a study of the cracking and coking kinetics of shale oil vapors was continued. A mathematical model was implemented to characterize the important mass transfer effects of the system. This model will be eventually broadened to become a general fluidized bed coking model. In addition, experiments were performed to examine the effects of surface area, initial carbon content and steam treatment on coking activity. From the data that has been collected to-date, it appears that the coking activity of the tested substrates can be explained in terms of porosity (surface area and pore volume) and the initial carbon content of the solid.

  19. Better band gaps with asymptotically corrected local exchange potentials

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Singh, Prashant; Harbola, Manoj K.; Hemanadhan, M.; Mookerjee, Abhijit; Johnson, D. D.

    2016-02-22

    In this study, we formulate a spin-polarized van Leeuwen and Baerends (vLB) correction to the local density approximation (LDA) exchange potential [R. van Leeuwen and E. J. Baerends, Phys. Rev. A 49, 2421 (1994)] that enforces the ionization potential (IP) theorem following T. Stein et al. [Phys. Rev. Lett. 105, 266802 (2010)]. For electronic-structure problems, the vLB correction replicates the behavior of exact-exchange potentials, with improved scaling and well-behaved asymptotics, but with the computational cost of semilocal functionals. The vLB + IP correction produces a large improvement in the eigenvalues over those from the LDA due to correct asymptotic behaviormore » and atomic shell structures, as shown in rare-gas, alkaline-earth, zinc-based oxides, alkali halides, sulfides, and nitrides. In half-Heusler alloys, this asymptotically corrected LDA reproduces the spin-polarized properties correctly, including magnetism and half-metallicity. We also consider finite-sized systems [e.g., ringed boron nitride (B12N12) and graphene (C24)] to emphasize the wide applicability of the method.« less

  20. Lubricant-infused nanoparticulate coatings assembled by layer-by-layer deposition

    SciTech Connect (OSTI)

    Sunny, Steffi; Vogel, Nicolas; Howell, Caitlin; Vu, Thy L.; Aizenberg, Joanna

    2014-09-01

    Omniphobic coatings are designed to repel a wide range of liquids without leaving stains on the surface. A practical coating should exhibit stable repellency, show no interference with color or transparency of the underlying substrate and, ideally, be deposited in a simple process on arbitrarily shaped surfaces. We use layer-by-layer (LbL) deposition of negatively charged silica nanoparticles and positively charged polyelectrolytes to create nanoscale surface structures that are further surface-functionalized with fluorinated silanes and infiltrated with fluorinated oil, forming a smooth, highly repellent coating on surfaces of different materials and shapes. We show that four or more LbL cycles introduce sufficient surface roughness to effectively immobilize the lubricant into the nanoporous coating and provide a stable liquid interface that repels water, low-surface-tension liquids and complex fluids. The absence of hierarchical structures and the small size of the silica nanoparticles enables complete transparency of the coating, with light transmittance exceeding that of normal glass. The coating is mechanically robust, maintains its repellency after exposure to continuous flow for several days and prevents adsorption of streptavidin as a model protein. As a result, the LbL process is conceptually simple, of low cost, environmentally benign, scalable, automatable and therefore may present an efficient synthetic route to non-fouling materials.

  1. Economic contribution of lignins to ethanol production from biomass

    SciTech Connect (OSTI)

    Chum, H.L.; Parker, S.K.; Feinberg, D.A.; Wright, J.D.; Rice, P.A.; Sinclair, S.A.; Glasser, W.G.

    1985-05-01

    Lignin, one of the three major polymeric components of biomass (16% to 33% by weight in wood), has the highest specific heat content. Therefore, it can be burned for process fuel. Compared to coal, its fuel value is 2.2 cents/lb. This report investigates markets for lignin utilization of higher value. After lignin isolation from the process, purchase of replacement fuel (coal was analyzed), lignin sale for the manufacture of solid materials or higher value octane enhancers was evaluated. Polymeric applications evaluated were: surfactants, asphalt, carbon black, adhesives, and lignin plastics; agricultural applications were briefly reviewed. These lignins would generate coproduct credits of 25 cents to 150 cents/gallon of ethanol respectively for 7.5 cents to 60 cents/lb lignin value (isolation and eventual modification costs were taken into account). Overall markets for these polymeric applications were projected at 11 billion lb/year by the year 2000. These projections are intensities of demand and not actual shipments of lignins. In addition, this report investigates the possibility of converting lignins into mixtures of methyls aryl ethers and methyl substituted-aryl ethers which are high value octane enhancers, fully compatible with gasoline. The report intends to show that if fuel ethanol production in the billions of gallons scale occurs lignin markets would not be saturated. 10 refs., 14 figs., 36 tabs.

  2. MBI Biorefinery: Corn to Biomass, Ethanol to Biochemicals and Biomaterials

    SciTech Connect (OSTI)

    2006-02-17

    The project is a continuation of DOE-funded work (FY02 and FY03) that has focused on the development of the ammonia fiber explosion (AFEX) pretreatment technology, fermentation production of succinic acid and new processes and products to enhance dry mill profitability. The primary objective for work beginning in April 2004 and ending in November 2005 is focus on the key issues related to the: (1) design, costing and construction plan for a pilot AFEX pretreatment system, formation of a stakeholder development team to assist in the planning and design of a biorefinery pilot plant, continued evaluation of corn fractionation technologies, corn oil extraction, AFEX treatment of corn fiber/DDGs; (2) development of a process to fractionate AFEX-treated corn fiber and corn stover--cellulose and hemicellulose fractionation and sugar recovery; and (3) development of a scalable batch succinic acid production process at 500 L at or below $.42/lb, a laboratory scale fed-batch process for succinic acid production at or below $.40/lb, a recovery process for succinic acid that reduces the cost of succinic acid by $.02/lb and the development of an acid tolerant succinic acid production strain at lab scale (last objective not to be completed during this project time period).

  3. Lubricant-infused nanoparticulate coatings assembled by layer-by-layer deposition

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Sunny, Steffi; Vogel, Nicolas; Howell, Caitlin; Vu, Thy L.; Aizenberg, Joanna

    2014-09-01

    Omniphobic coatings are designed to repel a wide range of liquids without leaving stains on the surface. A practical coating should exhibit stable repellency, show no interference with color or transparency of the underlying substrate and, ideally, be deposited in a simple process on arbitrarily shaped surfaces. We use layer-by-layer (LbL) deposition of negatively charged silica nanoparticles and positively charged polyelectrolytes to create nanoscale surface structures that are further surface-functionalized with fluorinated silanes and infiltrated with fluorinated oil, forming a smooth, highly repellent coating on surfaces of different materials and shapes. We show that four or more LbL cycles introducemore » sufficient surface roughness to effectively immobilize the lubricant into the nanoporous coating and provide a stable liquid interface that repels water, low-surface-tension liquids and complex fluids. The absence of hierarchical structures and the small size of the silica nanoparticles enables complete transparency of the coating, with light transmittance exceeding that of normal glass. The coating is mechanically robust, maintains its repellency after exposure to continuous flow for several days and prevents adsorption of streptavidin as a model protein. As a result, the LbL process is conceptually simple, of low cost, environmentally benign, scalable, automatable and therefore may present an efficient synthetic route to non-fouling materials.« less

  4. Energy and materials flows in the production of olefins and their derivatives

    SciTech Connect (OSTI)

    Gaines, L.L.; Shen, S.Y.

    1980-08-01

    Production of olefins and their derivatives uses almost 3.5% of the oil and gas consumed annually in the United States. It is estimated that their production requires an input energy of 2 Q, which is 50% of the energy used in the production of all petrochemicals. Substantial amounts of this energy could be recovered through recycling. For example, recycling of a single plastic product, polyester soft drink bottles, could have recovered about 0.014 Q in 1979. (About 1.4 Q is used to produce plastic derivatives of olefins). Petrochemical processes use fuels as feedstocks, as well as for process energy, and a portion of this energy is not foregone and can be recovered through combustion of the products. The energy foregone in the production of ethylene is estimated to be 7800 Btu/lb. The energy foregone in plastics production ranges from 12,100 Btu/lb for the new linear low-density polyethylene to 77,200 Btu/lb for nylon 66, which is about 60% of the total energy input for that product. Further investigation of the following areas could yield both material and energy savings in the olefins industry: (1) recycling of petrochemical products to recover energy in addition to that recoverable through combustion, (2) impact of feedstock substitution on utilization of available national resources, and (3) effective use of the heat embodied in process steam. This steam accounts for a major fraction of the industry's energy input.

  5. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    and Hydrogen Tax Compressed natural gas (CNG) and hydrogen are taxed at a rate of $0.105 per gasoline gallon equivalent (GGE) until June 30, 2016; this rate will increase by $0.02 per year until July 2018. Liquefied natural gas (LNG) is taxed at a rate of $0.105 per diesel gallon equivalent (DGE) until June 30, 2016; this rate will increase by $0.02 per year until July 2018. One GGE is equal to 5.660 pounds (lbs.) of CNG or 2.198 lbs. of hydrogen. One DGE is equal to 6.06 lbs. of LNG. (Reference

  6. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Natural Gas Tax Compressed natural gas (CNG) and liquefied natural gas (LNG) dispensed into a motor vehicle is taxed at a rate of $0.15 per gasoline gallon equivalent (GGE) or diesel gallon equivalent (DGE), depending on how the dispenser lists the price. A GGE is defined as 5.66 pounds (lbs.) of CNG or 5.37 lbs. of LNG. A DGE is defined as 6.380 lbs. of CNG or 6.06 lbs. of LNG. Exemptions may apply. (Reference Texas Statutes, Tax Code 162.001, and 162.351 through 162.356

  7. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Natural Gas and Propane Vehicle License Fee Drivers using natural gas or propane to fuel a vehicle may pay an annual special use fuel license fee in lieu of the state fuel excise tax of $0.30 per gallon. The fee is determined by multiplying a base amount in the table below by the current tax rate and dividing by 12. Combined Vehicle Weight (pounds) Base Amount 0 - 10,000 $60 10,001 - 26,000 $300 26,001 and above $400 (Reference Oregon Revised Statutes 319.530

  8. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Alternative Fuel Tax The excise tax imposed on compressed natural gas (CNG), liquefied natural gas (LNG), and liquefied petroleum gas (LPG or propane) used to operate a vehicle can be paid through an annual flat rate sticker tax based on the following vehicle weights: Unladen Weight Fee All passenger cars and other vehicles 4,000 pounds (lbs.) or less $36 More than 4,000 lbs. but less than 8,001 lbs. $72 More than 8,000 lbs. but less than 12,001 lbs. $120 12,001 lbs. or more $168 Alternatively,

  9. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Heavy-Duty Truck Idle Reduction Requirements A driver of a diesel-fueled vehicle with a gross vehicle weight rating of more than 10,000 pounds may not idle the vehicle's primary engine for more than five consecutive minutes at any location, and is not allowed to operate a diesel-fueled auxiliary power system (APS) on the vehicle for more than five minutes when located within 100 feet of a restricted area. Exceptions apply in certain situations and for certain vehicles. Any internal combustion

  10. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Electric Vehicle (EV) Access to Roadways A low-speed EV, also known as a neighborhood electric vehicle, is defined as a motor vehicle with four wheels, a gross vehicle weight rating of 3,000 pounds or less, and capable of achieving a minimum speed of 20 miles per hour (mph) and a maximum speed of 25 mph. Low-speed EVs are subject to all provisions applicable to a motor vehicle and must meet federal safety standards established in Title 49 of the Code of Federal Regulations, section 571.500.

  11. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Definition A PEV is defined as a vehicle that: Draws electricity from a battery with a capacity of at least four kilowatt-hours and is capable of being charged from an external source; Has not been modified from the original equipment manufacturer power train specifications; Has a gross vehicle weight rating of 8,500 pounds or less; Has a maximum speed of at least 65 miles per hour; and Meets applicable requirements in Title 49 of the U.S. Code of Federal Regulations, section 571. (Reference

  12. Buildings Energy Data Book: 1.4 Environmental Data

    Buildings Energy Data Book [EERE]

    4 2003 Construction and Demolition Debris Generated from Construction Activities | Residential Commercial Buildings | Residential Commercial Buildings Construction 10.0 5.0 15.0 | 6% 3% 9% Demolition 38.0 33.0 71.0 | 22% 19% 42% Renovation 19.0 65.0 84.0 | 11% 38% 49% Total 67.0 103.0 170.0 | 39% 61% 100% Note(s): Source(s): Debris (million tons) Debris (percent of total buildings sector) 170 million tons of construction and demolition debris represents approximately 3.2 pounds of debris per

  13. Buildings Energy Data Book: 2.4 Residential Environmental Data

    Buildings Energy Data Book [EERE]

    2 2005 End-Use Carbon Dioxide Emissions Splits for an Average Household, by Region (Pounds of CO2) Northeast Midwest South West National Space Heating Space Cooling Water Heating Refrigerator Other Appliances & Lighting Total Source(s): EIA, A Look at Residential Energy Consumption in 2005, Jul. 2008, Tables CE(2-5)-(9-12)c; EIA, Assumptions to the AEO 2011, July 2011, Table 2, p. 12 for coefficients; EIA, AEO 2012 Early Release, Jan. 2012, Tables 2 and 18. 8,673 10,421 10,722 9,219 9,945

  14. Buildings Energy Data Book: 5.1 Building Materials/Insulation

    Buildings Energy Data Book [EERE]

    1 U.S. Insulation Demand, by Type (Million Pounds) (1) Insulation Type 1992 2001 2006 (1) Fiberglass 2,938 55% 3,760 54% 4,085 53% Foamed Plastic 1,223 23% 1,775 25% 1,955 26% Cellulose 485 9% 665 9% 730 10% Mineral Wool 402 8% 445 6% 480 6% Other 309 6% 370 5% 395 5% Total 5,357 100% 7,015 100% 7,645 100% Note(s): 1) Projected. Source(s): National Insulation Association, www.insulation.org, Aug. 2006.

  15. NREL: Technology Deployment - FEMA Engages NREL in Hurricane Sandy Recovery

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Effort FEMA Engages NREL in Hurricane Sandy Recovery Effort May 8, 2013 Natural Disasters, By the Numbers There have been 144 weather/climate disasters since 1980 in which overall damages reached or exceeded $1 billion. In 2005, the estimated economic loss due to Hurricane Katrina was about $187 billion. In 2012, the estimated total loss due to Hurricane Sandy was $71 billion in New York and New Jersey alone. By the time Hurricane Sandy pounded the East Coast on October 29, 2012, it had

  16. Turner-Fairbank Scour Experiments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Turn Your Halloween Pumpkins Into Power Turn Your Halloween Pumpkins Into Power October 27, 2015 - 9:37am Addthis Graphic by <a href="/node/379579">Sarah Gerrity</a>, Energy Department. Graphic by Sarah Gerrity, Energy Department. Liz Lowry Senior Research Analyst, Bioenergy Technologies Office Alicia Moulton Communications Specialist, Bioenergy Technologies Office What are the key facts? 1.3 billion pounds of pumpkins are produced in the United States each year, many of

  17. Uranium Processing Facility Team Signs Partnering Agreement | Y-12 National

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a. Uranium purchased by owners and operators of U.S. civilian nuclear power reactors, 1994-2014 million pounds U3O8 equivalent Delivery year Total purchased Purchased from U.S. producers Purchased from U.S. brokers and traders Purchased from other owners and operators of U.S. civilian nuclear power reactors, other U.S. suppliers, (and U.S. government for 2007)1 Purchased from foreign suppliers U.S.-origin uranium Foreign-origin uranium Spot contracts2 Short, medium, and long-term contracts3 1994

  18. Spray dryer capacity stretched 50%

    SciTech Connect (OSTI)

    Paraskevas, J.

    1983-01-01

    This article describes plant equipment modifications which has resulted in a 50% increase in spray drying capacity. The installation of a new atomizer and screening system in NL Chemicals' Newberry Springs plant which produces natural clays for use as rheological additives in industrial coatings, cosmetics and other products, resulted in a 50% increase in spray drying capacity. Energy consumption per pound of product was reduced by 7%, and product quality improved. This was achieved in less than three months at an investment of less than 10% of what an additional spray dryer would have cost.

  19. Table 3. U.S. Inputs to biodiesel production

    U.S. Energy Information Administration (EIA) Indexed Site

    U.S. Inputs to biodiesel production" "million pounds" ,"Feedstock inputs" ,"Vegetable oils",,,,,,,,,,,,"Animal fats" "Period","Canola oil",,"Corn oil",,"Cottonseed oil",,"Palm oil",,"Soybean oil",,"Other",,"Poultry",,"Tallow" 2014 "January",35.75,,72.72,,"W",,"W",,273,,"W",,2,,15

  20. American Recovery & Reinvestment Act Newsletter - Issue 14

    Office of Environmental Management (EM)

    WEST VALLEY, N.Y. - The West Valley Demonstration Project (WVDP) in New York has a power ful ally in its American Recover y and Reinvestment work to prepare one of its facilities for decon- tamination. It's known as the robotic arm, and has a set of jaws, a 600-pound grip force, reciprocating saw, impact wrench, and hydraulic shears capable of cutting pipes up to 3 feet. The robotic arm begins work this sum- mer to dismantle and remove more than one mile of process piping and nine vessels from