Powered by Deep Web Technologies
Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

ListServ Background Last upgrade 1999  

E-Print Network [OSTI]

-mail #12;All Public and Private ListsAll Public and Private Lists #12;#12;Public / Private / Confidential · Public ­ Mail & Archives open to anyone · Private ­ Mail & Archives open to subscribers · Confidential lists. A daily reporting message will be sent when errors are detected. No action is required by owners

Shahriar, Selim

2

None of this work has been peer-reviewed Description of ongoing Mars work led by Edwin Kite (kite@berkeley.edu), listed from most mature to least  

E-Print Network [OSTI]

@berkeley.edu), listed from most mature to least mature. Overall approach is to use MRO data to divide the Early Mars atmosphere, and that most water vapor is cold-trapped as precipitation source. Thus. Snowmelt and sedimentary rocks ­ thick early atmosphere not required? The recently published MOC- NA

Kite, Edwin

3

New Hampshire 4-H Serving to Learn, Learning to Serve  

E-Print Network [OSTI]

New Hampshire 4-H Serving to Learn, Learning to Serve Community Service Projects All good community for learning. This publication contains a list of suggested service projects and ideas for expanding the system works. Mindy Turner, New Mexico 4-H Youth Development Specialist November 2006 #12;New Hampshire 4

New Hampshire, University of

4

LED Update  

SciTech Connect (OSTI)

This article, which will appear in RESIDENTIAL LIGHTING MAGAZINE, interviews PNNL's Kelly Gordon and presents the interview in question and answer format. The topic is a light emitting diode (LED) lighting also known as solid state lighting. Solid state lighting will be a new category in an energy efficient lighting fixture design competition called Lighting for Tomorrow sponsored by the US Department of Energy Emerging Technologies Office, the American Institute for Lighting, and the Consortium for Energy Efficiency. LED technology has been around since the ’60s, but it has been used mostly for indicator lights on electronics equipment. The big breakthrough was the development in the 1990s of blue LEDs which can be combined with the red and green LEDs that already existed to make white light. LEDs produce 25 to 40 lumens of light per watt of energy used, almost as much as a CFL (50 lumens per watt) and much more efficient than incandescent sources, which are around 15 lumens per watt. They are much longer lived and practical in harsh environments unsuitable for incandescent lighting. They are ready for niche applications now, like under-counter lighting and may be practical for additional applications as technological challenges are worked out and the technology is advancing in leaps and bounds.

Johnson, Mark L.; Gordon, Kelly L.

2006-09-01T23:59:59.000Z

5

LED lamp  

DOE Patents [OSTI]

There is herein described a lamp for providing white light comprising a plurality of light sources positioned on a substrate. Each of said light sources comprises a blue light emitting diode (LED) and a dome that substantially covers said LED. A first portion of said blue light from said LEDs is transmitted through said domes and a second portion of said blue light is converted into a red light by a first phosphor contained in said domes. A cover is disposed over all of said light sources that transmits at least a portion of said red and blue light emitted by said light sources. The cover contains a second phosphor that emits a yellow light in response to said blue light. The red, blue and yellow light combining to form the white light and the white light having a color rendering index (CRI) of at least about 80.

Galvez, Miguel; Grossman, Kenneth; Betts, David

2013-11-12T23:59:59.000Z

6

LED Watch: The Outlook for LEDs  

Broader source: Energy.gov [DOE]

December 2014 LED Watch: The Outlook for LEDs James Brodrick, U.S. Department of Energy LD+A Magazine

7

CLEAN List Serve | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectricEnergyCTBarreis a city in ChittendenPartners LLC Jump to:CouncilCIM

8

Science Serving Sustainability  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Buildings Greening Transportation Green Purchasing & Green Technology Pollution Prevention Science Serving Sustainability ENVIRONMENTAL SUSTAINABILITY GOALS at...

9

Energy Efficiency of LEDs  

Broader source: Energy.gov (indexed) [DOE]

Efficiency of LEDs The energy efficiency of LEDs has increased substantially since the first general illumination products came to market, with currently available lamps and...

10

LED ProspectsLED Prospects photometric units  

E-Print Network [OSTI]

/5/8 #12;16 Light bulb comparisonLight bulb comparison W lumens khours CRI $US Incandescent (long life) 75-life incandescent with LED. · 10 light fixtures/home, lights on for 6h/day, 333 days/yr. · Electricity 0.12 $/kWh. W khours $US Incandescent (long life) 100 10 2 LED (PAR38, warm, dimmable) 11 40 90 · What is the lifetime

Pulfrey, David L.

11

Making Argumentation Serve Design  

E-Print Network [OSTI]

9 Making Argumentation Serve Design Gerhard Fischer University ofColorado Andreas C. Lemke ALCATEL scientist interesled in design and design suppon S\\"Stems, particularly in domain-oriented design environmenlS and how they make :irgumemation serve design by supporting reflection-in-action; he

Fischer, Gerhard

12

LED Lighting Retrofit  

E-Print Network [OSTI]

? Municipal Street Lighting Consortium ? American Public Power Association (APPA) ? Demonstration in Energy Efficiency Development (DEED) ? Source of funding and database of completed LED roadway projects 6 Rules of the Road ESL-KT-11-11-57 CATEE 2011..., 2011 ? 9 Solar-Assisted LED Case Study LaQuinta Hotel, Cedar Park, Texas ? Utilizes 18 - ActiveLED Solar-Assisted Parking Lot Lights ? Utilizes ?power management? to extend battery life while handling light output ? Reduces load which reduces PV...

Shaw-Meadow, N.

2011-01-01T23:59:59.000Z

13

Global LED Manufacturing  

Energy Savers [EERE]

0.20.5W 5630 PPA 0.51.0W 7030 PCT XVGA HDMI UHD 4K2K UHD 8K4K 0.81.2W 3030 EMC 1.22.0W 3535 EMC w Flip-Chip 0.50.8W 2835 PCT ? 1.01.5 W ???? Revolution of LED...

14

New Hampshire 4-H Serving to Learn, Learning to Serve  

E-Print Network [OSTI]

New Hampshire 4-H Serving to Learn, Learning to Serve Community Service by 4-H Project Area Development #12;New Hampshire 4-H Community Service by Project Area Serving to Learn, Learning to Serve that their service also relate to that project. This publication contains suggested service projects related

New Hampshire, University of

15

E-Print Network 3.0 - animated self-serve web-based Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

self-serve web-based Search Powered by Explorit Topic List Advanced Search Sample search results for: animated self-serve web-based Page: << < 1 2 3 4 5 > >> 1 Working with Animal...

16

LEDSGP/contacts/AFOLU List Serve | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429 ThrottledInformation KumasiToolsLEDSGP/assistance <

17

LED Frequently Asked Questions  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe10 DOEWashington, DCKickoffLDV HVAC Model Development andLED

18

LEDS Collaboration in Action Workshop Attendee List | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429 ThrottledInformation Kumasi Institute ofLACInformation Arrival

19

List of LED Exit Signs Incentives | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429Lacey,(Monaster And Coolbaugh, 2007)is 109.Lindley,LipscombWind Sector

20

Recessed LED Downlights | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L dDepartment ofList?Department ofAdministration| DepartmentRecessed LED

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

LED Record Efficacy and Brightness  

Broader source: Energy.gov [DOE]

Designed for general lighting applications such as street, industrial, and parking garage lighting, the Cree XLamp® power LED sets new records for LED brightness and efficacy, up to 85 lm/W at 350 mA. The XLamp utilizes Cree's performance breakthrough EZBright™ LED chip; both products include technology that was developed in part with R&D funding support from DOE.

22

OWNER'S MANUAL IPS LED MONITOR  

E-Print Network [OSTI]

www.lg.com OWNER'S MANUAL IPS LED MONITOR (LED LCD MONITOR) 27EA83 27EA83R Please read the safety different licenses. Visit www.lg.com for more information on the license. VESA, VESA logo, Display Port of the Video Electronics Standards Association. The terms HDMI and HDMI High-Definition Multimedia Interface

Ott, Albrecht

23

TIP list  

SciTech Connect (OSTI)

Subcontractors and vendors providing services, including the installation of purchased goods, are required to complete a TIP List. This list does not include every Environment, Safety, and Health (ES&H) related concern at LLNL. It is intended to highlight major concerns common to most on-site service activities.

Ludwig, M E

2006-06-22T23:59:59.000Z

24

Ongoing LED RD Challenges (LED droop still challenge)  

Energy Savers [EERE]

and Nonpolar GaN Semi polar GaN SOLUTION New GaN Crystal Planes * Semipolar planes for blue, green and yellow LEDs A. Romanov et al. : J. Appl. Phys. 100 (2006) 023533. (1122)...

25

Metacapacitors for LED Lighting: Metacapacitors  

SciTech Connect (OSTI)

ADEPT Project: The CUNY Energy Institute is developing less expensive, more efficient, smaller, and longer-lasting power converters for energy-efficient LED lights. LEDs produce light more efficiently than incandescent lights and last significantly longer than compact fluorescent bulbs, but they require more sophisticated power converter technology, which increases their cost. LEDs need more sophisticated converters because they require a different type of power (low voltage direct current, or DC) than what's generally supplied by power outlets. The CUNY Energy Institute is developing sophisticated power converters for LEDs that contain capacitors made from new, nanoscale materials. Capacitors are electrical components that are used to store energy. CUNY's unique capacitors are configured with advanced power circuits to more efficiently control and convert power to the LED lighting source. They also eliminate the need for large magnetic components, instead relying on networks of capacitors that can be easily printed on plastic substrate. CUNY's prototype LED power converter already meets DOE's 2020 projections for the energy efficiency of LED power converters.

None

2010-09-02T23:59:59.000Z

26

Maintenance Practices for LED Streetlights  

Broader source: Energy.gov [DOE]

This April 14, 2014 webinar answered important questions about the maintenance and reliability of LED streetlights, and how to take these issues into account when planning and preparing for a...

27

Low-Cost Illumination-Grade LEDs  

SciTech Connect (OSTI)

Solid State Lighting is a cost-effective, energy-conserving technology serving a rapidly expand- ing multi-billion dollar market. This program was designed to accelerate this lighting revolution by reducing the manufacturing cost of Illumination-Grade LEDs. The technical strategy was to investigate growth substrate alternatives to standard planar sapphire, select the most effective and compatible option, and demonstrate a significant increase in Lumen/$ with a marketable LED. The most obvious alternate substrate, silicon, was extensively studied in the first two years of the program. The superior thermal and mechanical properties of Si were expected to improve wavelength uniformity and hence color yield in the manufacture of high-power illumination- grade LEDs. However, improvements in efficiency and epitaxy uniformity on standard c-plane sapphire diminished the advantages of switching to Si. Furthermore, the cost of sapphire decreased significantly and the cost of processing Si devices using our thin film process was higher than expected. We concluded that GaN on Si was a viable technology but not a practical option for Philips Lumileds. Therefore in 2012 and 2013, we sought and received amendments which broadened the scope to include other substrates and extended the time of execution. Proprietary engineered substrates, off-axis (non-c-plane) sapphire, and c-plane patterned sapphire substrates (PSS) were all investigated in the final 18 months of this program. Excellent epitaxy quality was achieved on all three candidates; however we eliminated engineered substrates and non-c-plane sapphire because of their higher combined cost of substrate, device fabrication and packaging. Ultimately, by fabricating a flip-chip (FC) LED based upon c-plane PSS we attained a 42% reduction in LED manufacturing cost relative to our LUXEON Rebel product (Q1-2012). Combined with a flux gain from 85 to 102 Lm, the LUXEON Q delivered a 210% increase in Lm/$ over this time period. The technology was commercialized in our LUXEON Q product in Sept., 2013. Also, the retention of the sapphire increased the robustness of the device, enabling sales of low-cost submount-free chips to lighting manufacturers. Thus, blue LED die sales were initiated in the form of a PSS-FC in February, 2013.

Epler, John

2013-08-31T23:59:59.000Z

28

E-Print Network 3.0 - adjustable red-green-blue led Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Powered by Explorit Topic List Advanced Search Sample search results for: adjustable red-green-blue led Page: << < 1 2 3 4 5 > >> 1 The Spectrum of Clean Energy Innovationinnovati...

29

LED Lightbulbs | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe10 DOEWashington, DCKickoffLDV HVAC ModelLED Lightbulbs LED

30

LED Lighting Facts®  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe10 DOEWashington, DCKickoffLDV HVAC ModelLED LightbulbsLED

31

LED lamp color control system and method  

DOE Patents [OSTI]

An LED lamp color control system and method including an LED lamp having an LED controller 58; and a plurality of LED channels 60 operably connected to the LED controller 58, each of the plurality of LED channels 60 having a channel switch 62 in series with at least one shunted LED circuit 83, the shunted LED circuit 83 having a shunt switch 68 in parallel with an LED source 80. The LED controller 58 determines whether the LED source 80 is in a feedback controllable range, stores measured optical flux for the LED source 80 when the LED source 80 is in the feedback controllable range, and bypasses storing the measured optical flux when the LED source 80 is not in the feedback controllable range.

Gaines, James; Clauberg, Bernd; Van Erp, Josephus A.M.

2013-02-05T23:59:59.000Z

32

LED lamp power management system and method  

DOE Patents [OSTI]

An LED lamp power management system and method including an LED lamp having an LED controller 58; a plurality of LED channels 60 operably connected to the LED controller 58, each of the plurality of LED channels 60 having a channel switch 62 in series with at least one shunted LED circuit 83, the shunted LED circuit 83 having a shunt switch 68 in parallel with an LED source 80. The LED controller 58 reduces power loss in one of the channel switch 62 and the shunt switch 68 when LED lamp electronics power loss (P.sub.loss) exceeds an LED lamp electronics power loss limit (P.sub.lim); and each of the channel switches 62 receives a channel switch control signal 63 from the LED controller 58 and each of the shunt switches 68 receives a shunt switch control signal 69 from the LED controller 58.

Gaines, James; Clauberg, Bernd; Van Erp, Josephus A. M.

2013-03-19T23:59:59.000Z

33

Multicolor, High Efficiency, Nanotextured LEDs  

SciTech Connect (OSTI)

We report on research results in this project which synergize advanced material science approaches with fundamental optical physics concepts pertaining to light-matter interaction, with the goal of solving seminal problems for the development of very high performance light emitting diodes (LEDs) in the blue and green for Solid State Lighting applications. Accomplishments in the duration of the contract period include (i) heteroepitaxy of nitrogen-polar LEDs on sapphire, (ii) heteroepitaxy of semipolar (11{bar 2}2) green LEDs on sapphire, (iii) synthesis of quantum-dot loaded nanoporous GaN that emits white light without phosphor conversion, (iv) demonstration of the highest quality semipolar (11{bar 2}2) GaN on sapphire using orientation-controlled epitaxy, (v) synthesis of nanoscale GaN and InGaN medium, and (vi) development of a novel liftoff process for manufacturing GaN thin-film vertical LEDs. The body of results is presented in this report shows how a solid foundation has been laid, with several noticeable accomplishments, for innovative research, consistent with the stated milestones.

Jung Han; Arto Nurmikko

2011-09-30T23:59:59.000Z

34

LED Lighting | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy UsageAUDITVehicles »Exchange Visitors HistoryHybridInspectorInvestingJobsLED Lighting

35

Cree LED Lighting Solutions Formerly LED Lighting Fixtures LLF | Open  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:EnergyWisconsin:2003) |Cordova39. It isEnergy Information LED Lighting

36

A Practical Primer to LED Technology  

Energy Savers [EERE]

due to die size * As LED efficacy improves, applications will expand Source: Kelly Gordon, PNNL 2011 LED Transformations, LLC 58 Final Thoughts * Think of how the...

37

Commercial Lighting and LED Lighting Incentives  

Broader source: Energy.gov [DOE]

Incentives for energy efficient commercial lighting equipment as well as commercial LED lighting equipment are available to businesses under the Efficiency Vermont Lighting and LED Lighting...

38

Low Emission Development Strategies (LEDS): Technical, Institutional...  

Open Energy Info (EERE)

Strategies (LEDS): Technical, Institutional and Policy Lessons Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Low Emission Development Strategies (LEDS): Technical,...

39

Sandia National Laboratories: white LED  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administrationcontroller systems controller systems Scaled Windwhite LED Brief History of

40

List based prefetch  

DOE Patents [OSTI]

A list prefetch engine improves a performance of a parallel computing system. The list prefetch engine receives a current cache miss address. The list prefetch engine evaluates whether the current cache miss address is valid. If the current cache miss address is valid, the list prefetch engine compares the current cache miss address and a list address. A list address represents an address in a list. A list describes an arbitrary sequence of prior cache miss addresses. The prefetch engine prefetches data according to the list, if there is a match between the current cache miss address and the list address.

Boyle, Peter; Christ, Norman; Gara, Alan; Kim, Changhoan; Mawhinney, Robert; Ohmacht, Martin; Sugavanam, Krishnan

2014-08-12T23:59:59.000Z

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

List based prefetch  

DOE Patents [OSTI]

A list prefetch engine improves a performance of a parallel computing system. The list prefetch engine receives a current cache miss address. The list prefetch engine evaluates whether the current cache miss address is valid. If the current cache miss address is valid, the list prefetch engine compares the current cache miss address and a list address. A list address represents an address in a list. A list describes an arbitrary sequence of prior cache miss addresses. The prefetch engine prefetches data according to the list, if there is a match between the current cache miss address and the list address.

Boyle, Peter (Edinburgh, GB); Christ, Norman (Irvington, NY); Gara, Alan (Yorktown Heights, NY); Kim; ,Changhoan (San Jose, CA); Mawhinney, Robert (New York, NY); Ohmacht, Martin (Yorktown Heights, NY); Sugavanam, Krishnan (Yorktown Heights, NY)

2012-08-28T23:59:59.000Z

42

Here to Serve | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Here to Serve Here to Serve May 11, 2012 - 8:53am Addthis Dot Harris Dot Harris Director, Office of Economic Impact and Diversity It is a pleasure to join the Administration as the...

43

CoServ- Solar Energy Rebate (Texas)  

Broader source: Energy.gov [DOE]

'''''NOTE: Available funding for fiscal year 2012 has been exhausted for the CoServ Solar PV Rebate Program.'''''

44

LEDs: The Future of Lighting is Here | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample Environment: Magnet and6ledp/ The listing of newLEDs:

45

LED Watch: The Outlook for OLEDs  

Broader source: Energy.gov [DOE]

December 2014 LED Watch: The Outlook for OLEDs James Brodrick, U.S. Department of Energy LD+A Magazine

46

Dual LED/incandescent security fixture  

DOE Patents [OSTI]

A dual LED and incandescent security lighting system uses a hybrid approach to LED illumination. It combines an ambient LED illuminator with a standard incandescent lamp on a motion control sensor. The LED illuminator will activate with the onset of darkness (daylight control) and typically remain on during the course of the night ("always on"). The LED illumination, typically amber, is sufficient to provide low to moderate level lighting coverage to the wall and ground area adjacent to and under the fixture. The incandescent lamp is integrated with a motion control circuit and sensor. When movement in the field of view is detected (after darkness), the incandescent lamp is switched on, providing an increased level of illumination to the area. Instead of an "always on" LED illuminator, the LEDs may also be switched off when the incandescent lamp is switched on.

Gauna, Kevin Wayne

2005-06-21T23:59:59.000Z

47

FOOD AND DRINK REGULATIONS Serving hot food  

E-Print Network [OSTI]

of food poisoning increases as time passes. · Hand contact with unwrapped food should be kept to a minimum1 FOOD AND DRINK REGULATIONS Serving hot food Home made hot food may not be served at events conditions must be adhered to: · The caterer must have HSE Food Hygiene Certification, which

O'Mahony, Donal E.

48

Challenges in LED Research and Development  

Broader source: Energy.gov [DOE]

View the video about LED lighting technology, where it is headed, and the DOE’s role in its continued R&D.

49

LED Linear Lamps and Troffer Lighting  

Broader source: Energy.gov [DOE]

The CALiPER program performed a series of investigations on linear LED lamps. Each report in the series covers the performance of up to 31 linear LED lamps, which were purchased in late 2012 or 2013. The first report focuses on bare lamp performance of LED T8 replacement lamps and subsequent reports examine performance in various troffers, as well as cost-effectiveness. There is also a concise guidance document that describes the findings of the Series 21 studies and provides practical advice to manufacturers, specifiers, and consumers (Report 21.4: Summary of Linear (T8) LED Lamp Testing , 5 pages, June 2014).

50

Investigation on Operating Characteristics of RGB LEDs.  

E-Print Network [OSTI]

??This thesis seeks to gain a better understanding on operating characteristics of the three primary color light emitting diode (LED). By applying direct, pulse and… (more)

Liao, Chi-nan

2007-01-01T23:59:59.000Z

51

Efficient Driver for Dimmable White LED Lighting.  

E-Print Network [OSTI]

??A high efficiency driver circuit is proposed for Light Emitting Diode (LED) lamps with dimming feature. The current regulation is accomplished by processing partial power… (more)

Yang, Wen-ching

2011-01-01T23:59:59.000Z

52

LED Replacements for Linear Fluorescent Lamps Webcast  

Broader source: Energy.gov [DOE]

In this June 20, 2011 webcast on LED products marketed as replacements for linear fluorescent lamps, Jason Tuenge of the Pacific Northwest National Laboratory (PNNL) discussed current Lighting...

53

Municipal Consortium LED Street Lighting Workshop Presentations...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Controls Norma Isahakian, City of Los Angeles Bureau of Street Lighting San Jose's "Smart" LED Streetlights: Controlled Amy Olay, City of San Jose Adaptive Lighting Controls...

54

Model Specification for LED Roadway Luminaires Webcast  

Broader source: Energy.gov [DOE]

This November 15, 2011 webcast presented information about the Model Specification for LED Roadway Luminaires developed by DOE's Municipal Solid-State Street Lighting Consortium. During the webcast...

55

LED Street Lighting Conversion Workshop Presentations  

Broader source: Energy.gov [DOE]

This page provides links to the presentations given at the National League of Cities Mobile Workshop, LED Street Lighting Conversion: Saving Your Community Money, While Improving Public Safety,...

56

December 2014 CCE-Led One-Time Service Projects Transportation Provided  

E-Print Network [OSTI]

December 2014 CCE-Led One-Time Service Projects Transportation Provided Check In Times Listed Place Senior Center Manicures 6 PM ­ 8 PM 4 Colton Pen Friends 8:15 AM ­ 11:30 AM Recycling Outreach Friends 8:15 AM ­ 11:30 AM Recycling Outreach Campus to Community 10 AM ­ 1 PM Whitman Senior Living

Collins, Gary S.

57

Solving the 'Green Gap' in LED Technology  

Broader source: Energy.gov [DOE]

One long-standing high-priority research area for DOE is to increase the efficiency of deep green LEDs. Although most products today use phosphor conversion (PC) to produce white light from a blue LED, having a good green source could lead to color-mixed white sources that would avoid the losses associated with the PC approach.

58

Today LED Holiday Lights, Tomorrow the World?  

SciTech Connect (OSTI)

This article for The APEM Advantage, the quarterly newsletter of the Association of Professional Energy Managers (APEM) describes the recent increase in the popularity of light emitting diode (LED) lighting and compares LED light output with that of incandescent and compact fluorescent lighting.

Gordon, Kelly L.

2004-12-20T23:59:59.000Z

59

100 LPW 800 Lm Warm White LED  

SciTech Connect (OSTI)

An illumination grade warm white (WW) LED, having correlated color temperature (CCT) between 2800 K and 3500K and capable of producing 800 lm output at 100 lm/W, has been developed in this program. The high power WW LED is an ideal source for use as replacement for incandescent, and Halogen reflector and general purpose lamps of similar lumen value. Over the two year period, we have made following accomplishments: developed a high power warm white LED product and made over 50% improvements in light output and efficacy. The new high power WW LED product is a die on ceramic surface mountable LED package. It has four 1x1 mm{sup 2} InGaN pump dice flip chip attached to a ceramic submount in 2x2 array, covered by warm white phosphor ceramic platelets called Lumiramicâ?¢ and an overmolded silicone lens encapsulating the LED array. The performance goal was achieved through breakthroughs in following key areas: (1) High efficiency pump LED development through pump LED active region design and epi growth quality improvement (funded by internal programs). (2) Increase in injection efficiency (IE) represented by reduction in forward voltage (V{sub f}) through the improvement of the silver-based p-contact and a reduction in spreading resistance. The injection efficiency was increased from 80% at the start of the program to 96% at the end of the program at 700 mA/mm{sup 2}. (3) Improvement in thermal design as represented by reduction in thermal resistance from junction to case, through improvement of the die to submount connection in the thin film flip chip (TFFC) LED and choosing the submount material of high thermal conductivity. A thermal resistance of 1.72 K/W was demonstrated for the high power LED package. (4) Improvement in extraction efficiency from the LED package through improvement of InGaN die level and package level optical extraction efficiency improvement. (5) Improvement in phosphor system efficiency by improving the lumen equivalent (LE) and phosphor package efficiency (PPE) through improvement in phosphor-package interactions. Another achievement in the development of the phosphor integration technology is the demonstration of tight color control. The high power WW LED product developed has been proven to have good reliability. The manufacturing of the product will be done in Philips Lumiledsâ?? LUXEON Rebel production line which has produced billions of high power LEDs. The first high power WW LED product will be released to the market in 2011.

Decai Sun

2010-10-31T23:59:59.000Z

60

An LED pulser for measuring photomultiplier linearity  

E-Print Network [OSTI]

A light-emitting diode (LED) pulser for testing the low-rate response of a photomultiplier tube (PMT) to scintillator-like pulses has been designed, developed, and implemented. This pulser is intended to simulate 80 ns full width at half maximum photon pulses over the dynamic range of the PMT, in order to precisely determine PMT linearity. This particular design has the advantage that, unlike many LED test rigs, it does not require the use of multiple calibrated LEDs, making it insensitive to LED gain drifts. Instead, a finite-difference measurement is made using two LEDs which need not be calibrated with respect to one another. These measurements give a better than 1% mapping of the response function, allowing for the testing and development of particularly linear PMT bases.

Friend, M; Quinn, B

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

High Performance Green LEDs by Homoepitaxial  

SciTech Connect (OSTI)

This work's objective was the development of processes to double or triple the light output power from green and deep green (525 - 555 nm) AlGaInN light emitting diode (LED) dies within 3 years in reference to the Lumileds Luxeon II. The project paid particular effort to all aspects of the internal generation efficiency of light. LEDs in this spectral region show the highest potential for significant performance boosts and enable the realization of phosphor-free white LEDs comprised by red-green-blue LED modules. Such modules will perform at and outperform the efficacy target projections for white-light LED systems in the Department of Energy's accelerated roadmap of the SSL initiative.

Wetzel, Christian; Schubert, E Fred

2009-11-22T23:59:59.000Z

62

Feedback-Controlled LED Photobioreactor for Photophysiological Studies of Cyanobacteria  

SciTech Connect (OSTI)

A custom photobioreactor (PBR) was designed to enable automatic light adjustments using computerized feedback control. A black anodized aluminum enclosure, constructed to surround the borosilicate reactor vessel, prevents the transmission of ambient light and serves as a mount for arrays of light-emitting diodes (LEDs). The high-output LEDs provide narrow-band light of either 630 or 680 nm for preferential excitation of the cyanobacterial light-harvesting pigments, phycobilin or chlorophyll a, respectively. Custom developed software BioLume provides automatic control of optical properties and a computer feedback loop can automatically adjust the incident irradiance as necessary to maintain a fixed transmitted light through the culture, based on user-determined set points. This feedback control serves to compensate for culture dynamics which have optical effects, (e.g., changing cell density, pigment adaptations) and thus can determine the appropriate light conditions for physiological comparisons or to cultivate light-sensitive strains, without prior analyses. The LED PBR may also be controlled as a turbidostat, using a feedback loop to continuously adjust the rate of media-dilution based on the transmitted light measurements, with a fast and precise response. This cultivation system gains further merit as a high-performance analytical device, using non-invasive tools (e.g., dissolved gas sensors, online mass spectrometry) to automate real-time measurements, thus permitting unsupervised experiments to search for optimal growth conditions, to monitor physiological responses to perturbations, as well as to quantitate photophysiological parameters using an in situ light-saturation response routine.

Melnicki, Matthew R.; Pinchuk, Grigoriy E.; Hill, Eric A.; Kucek, Leo A.; Stolyar, Sergey; Fredrickson, Jim K.; Konopka, Allan; Beliaev, Alex S.

2013-04-09T23:59:59.000Z

63

One Video Stream to Serve Diverse Receivers  

E-Print Network [OSTI]

The fundamental problem of wireless video multicast is to scalably serve multiple receivers which may have very different channel characteristics. Ideally, one would like to broadcast a single stream that allows each ...

Woo, Grace

2008-10-18T23:59:59.000Z

64

Site maps and facilities listings  

SciTech Connect (OSTI)

In September 1989, a Memorandum of Agreement among DOE offices regarding the environmental management of DOE facilities was signed by appropriate Assistant Secretaries and Directors. This Memorandum of Agreement established the criteria for EM line responsibility. It stated that EM would be responsible for all DOE facilities, operations, or sites (1) that have been assigned to DOE for environmental restoration and serve or will serve no future production need; (2) that are used for the storage, treatment, or disposal of hazardous, radioactive, and mixed hazardous waste materials that have been properly characterized, packaged, and labelled, but are not used for production; (3) that have been formally transferred to EM by another DOE office for the purpose of environmental restoration and the eventual return to service as a DOE production facility; or (4) that are used exclusively for long-term storage of DOE waste material and are not actively used for production, with the exception of facilities, operations, or sites under the direction of the DOE Office of Civilian Radioactive Waste Management. As part of the implementation of the Memorandum of Agreement, Field Offices within DOE submitted their listings of facilities, systems, operation, and sites for which EM would have line responsibility. It is intended that EM facility listings will be revised on a yearly basis so that managers at all levels will have a valid reference for the planning, programming, budgeting and execution of EM activities.

Not Available

1993-11-01T23:59:59.000Z

65

White LED with High Package Extraction Efficiency  

SciTech Connect (OSTI)

The goal of this project is to develop a high efficiency phosphor converting (white) Light Emitting Diode (pcLED) 1-Watt package through an increase in package extraction efficiency. A transparent/translucent monolithic phosphor is proposed to replace the powdered phosphor to reduce the scattering caused by phosphor particles. Additionally, a multi-layer thin film selectively reflecting filter is proposed between blue LED die and phosphor layer to recover inward yellow emission. At the end of the project we expect to recycle approximately 50% of the unrecovered backward light in current package construction, and develop a pcLED device with 80 lm/W{sub e} using our technology improvements and commercially available chip/package source. The success of the project will benefit luminous efficacy of white LEDs by increasing package extraction efficiency. In most phosphor-converting white LEDs, the white color is obtained by combining a blue LED die (or chip) with a powdered phosphor layer. The phosphor partially absorbs the blue light from the LED die and converts it into a broad green-yellow emission. The mixture of the transmitted blue light and green-yellow light emerging gives white light. There are two major drawbacks for current pcLEDs in terms of package extraction efficiency. The first is light scattering caused by phosphor particles. When the blue photons from the chip strike the phosphor particles, some blue light will be scattered by phosphor particles. Converted yellow emission photons are also scattered. A portion of scattered light is in the backward direction toward the die. The amount of this backward light varies and depends in part on the particle size of phosphors. The other drawback is that yellow emission from phosphor powders is isotropic. Although some backward light can be recovered by the reflector in current LED packages, there is still a portion of backward light that will be absorbed inside the package and further converted to heat. Heat generated in the package may cause a deterioration of encapsulant materials, affecting the performance of both the LED die and phosphor, leading to a decrease in the luminous efficacy over lifetime. Recent studies from research groups at Rensselaer Polytechnic Institute found that, under the condition to obtain a white light, about 40% of the light is transmitted outward of the phosphor layer and 60% of the light is reflected inward.1,2 It is claimed that using scattered photon extraction (SPE) technique, luminous efficacy is increased by 60%. In this project, a transparent/translucent monolithic phosphor was used to replace the powdered phosphor layer. In the normal pcLED package, the powdered phosphor is mixed with silicone either to be deposited on the top of LED die forming a chip level conversion (CLC) white LED or to be casted in the package forming a volume conversion white LED. In the monolithic phosphors there are no phosphor powder/silicone interfaces so it can reduce the light scattering caused by phosphor particles. Additionally, a multi-layer thin film selectively reflecting filter is inserted in the white LED package between the blue LED die and phosphor layer. It will selectively transmit the blue light from the LED die and reflect the phosphor's yellow inward emission outward. The two technologies try to recover backward light to the outward direction in the pcLED package thereby improving the package extraction efficiency.

Yi Zheng; Matthew Stough

2008-09-30T23:59:59.000Z

66

High Power UV LED Industrial Curing Systems  

SciTech Connect (OSTI)

UV curing is a green technology that is largely underutilized because UV radiation sources like Hg Lamps are unreliable and difficult to use. High Power UV LEDs are now efficient enough to replace Hg Lamps, and offer significantly improved performance relative to Hg Lamps. In this study, a modular, scalable high power UV LED curing system was designed and tested, performing well in industrial coating evaluations. In order to achieve mechanical form factors similar to commercial Hg Lamp systems, a new patent pending design was employed enabling high irradiance at long working distances. While high power UV LEDs are currently only available at longer UVA wavelengths, rapid progress on UVC LEDs and the development of new formulations designed specifically for use with UV LED sources will converge to drive more rapid adoption of UV curing technology. An assessment of the environmental impact of replacing Hg Lamp systems with UV LED systems was performed. Since UV curing is used in only a small portion of the industrial printing, painting and coating markets, the ease of use of UV LED systems should increase the use of UV curing technology. Even a small penetration of the significant number of industrial applications still using oven curing and drying will lead to significant reductions in energy consumption and reductions in the emission of green house gases and solvent emissions.

Karlicek, Robert, F., Jr; Sargent, Robert

2012-05-14T23:59:59.000Z

67

Acronym master list  

SciTech Connect (OSTI)

This document is a master list of acronyms and other abbreviations that are used by or could be useful to, the personnel at Los Alamos National Laboratory. Many specialized and well-known abbreviations are not included in this list.

NONE

1995-06-01T23:59:59.000Z

68

All inorganic colloidal quantum dot LEDs  

E-Print Network [OSTI]

This thesis presents the first colloidal quantum dot light emitting devices (QD-LEDs) with metal oxide charge transport layers. Colloidally synthesized quantum dots (QDs) have shown promise as the active material in ...

Wood, Vanessa Claire

2007-01-01T23:59:59.000Z

69

LED Essentials- Technology, Applications, Advantages, Disadvantages  

Broader source: Energy.gov [DOE]

On October 11, 2007, Kevin Dowling, VP of Innovation for Philips Solid-State Lighting Solutions, presented a broad introduction to LED technology, and discussed the technology status, advantages...

70

Sandia National Laboratories: warm white LED  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

warm white LED Sandia Develops a Synthesis of Quantum Dots that Increases the Quantum Yield to 95.5% On May 23, 2013, in Energy, Energy Efficiency, Materials Science, News, News &...

71

LED Color Stability: 10 Important Questions  

Broader source: Energy.gov [DOE]

This April 15, 2014 webinar examined the causes of color shift, and took a look at existing metrics used to describe color shift/color stability in LED lighting. The lumen maintenance lifetime of...

72

List mode multichannel analyzer  

DOE Patents [OSTI]

A digital list mode multichannel analyzer (MCA) built around a programmable FPGA device for onboard data analysis and on-the-fly modification of system detection/operating parameters, and capable of collecting and processing data in very small time bins (<1 millisecond) when used in histogramming mode, or in list mode as a list mode MCA.

Archer, Daniel E. (Livermore, CA); Luke, S. John (Pleasanton, CA); Mauger, G. Joseph (Livermore, CA); Riot, Vincent J. (Berkeley, CA); Knapp, David A. (Livermore, CA)

2007-08-07T23:59:59.000Z

73

LEDS GP Success Story: Fostering Coordinated LEDS Support in Kenya (Fact Sheet)  

SciTech Connect (OSTI)

The LEDS Global Partnership (LEDS GP) strives to advance climate-resilient, low-emission development through catalyzing collaboration, information exchange, and action on the ground. The Government of Kenya is a key LEDS GP member and offers an inspiring example of how LEDS GP is having an impact globally. The 2012 LEDS Collaboration in Action workshop in London provided an interactive space for members to share experiences on cross-ministerial LEDS leadership and to learn about concrete development impacts of LEDS around the world. Inspired by these stories, the Kenya's Ministry of State for Planning, National Development and Vision 2030 (MPND) began to collaborate closely with the Ministry of Environment and Mineral Resources to create strong links between climate change action and development in the country, culminating in the integration of Kenya's National Climate Change Action Plan and the country's Medium Term Development Plan.

Not Available

2014-03-01T23:59:59.000Z

74

Pittsburgh LED Street Lighting Research Project Performance Criteria  

Broader source: Energy.gov [DOE]

A Pittsburgh LED Street Lighting Research Project document on Technical and Aesthetic Performance for Business District LED Lighting.

75

Tropical Fruit Ambrosia Makes 6 servings  

E-Print Network [OSTI]

Tropical Fruit Ambrosia Makes 6 servings 1 jar (26 oz.) mixed tropical fruit, drained 1 large coconut Lettuce leaves Directions: 1. In a large bowl, combine the tropical fruit and banana. 2. In a small bowl, stir together the yogurt, lime zest, and lime juice until blended. 3. Spoon over the fruit

Florida, University of

76

UNIVERSITY OF TORONTO Serving Customized Master Menu  

E-Print Network [OSTI]

Drumstick and WG Brown Rice Chicken Drumstick baked in a Herb Dressing and served with WG Brown Rice Sandwich on WW Bread Fresh Vegetables and Ranch Dip Natural Fruit Yogurt with Granola 0.5 2.5 0.25 2.5 0 2

Toronto, University of

77

LED structure with enhanced mirror reflectivity  

DOE Patents [OSTI]

Embodiments of the present invention are generally related to LED chips having improved overall emission by reducing the light-absorbing effects of barrier layers adjacent mirror contacts. In one embodiment, a LED chip comprises one or more LEDs, with each LED having an active region, a first contact under the active region having a highly reflective mirror, and a barrier layer adjacent the mirror. The barrier layer is smaller than the mirror such that it does not extend beyond the periphery of the mirror. In another possible embodiment, an insulator is further provided, with the insulator adjacent the barrier layer and adjacent portions of the mirror not contacted by the active region or by the barrier layer. In yet another embodiment, a second contact is provided on the active region. In a further embodiment, the barrier layer is smaller than the mirror such that the periphery of the mirror is at least 40% free of the barrier layer, and the second contact is below the first contact and accessible from the bottom of the chip.

Bergmann, Michael; Donofrio, Matthew; Heikman, Sten; Schneider, Kevin S; Haberern, Kevin W; Edmond, John A

2014-04-01T23:59:59.000Z

78

LEDs for Energy Efficient Greenhouse Lighting  

E-Print Network [OSTI]

Light energy is an important factor for plant growth. In regions where the natural light source, i.e. solar radiation, is not sufficient for growth optimization, additional light sources are being used. Traditional light sources such as high pressure sodium lamps and other metal halide lamps are not very efficient and generate high radiant heat. Therefore, new sustainable solutions should be developed for energy efficient greenhouse lighting. Recent developments in the field of light source technologies have opened up new perspectives for sustainable and highly efficient light sources in the form of light-emitting diodes, i.e. LEDs, for greenhouse lighting. This review focuses on the potential of LEDs to replace traditional light sources in the greenhouse. In a comparative economic analysis of traditional vs. LED lighting, we show that the introduction of LEDs allows reduction of the production cost of vegetables in the long-run of several years, due to the high energy efficiency, low maintenance cost and lon...

Singh, Devesh; Meinhardt-Wollweber, Merve; Roth, Bernhard

2014-01-01T23:59:59.000Z

79

Sustainable LED Fluorescent Light Replacement Technology  

SciTech Connect (OSTI)

Ilumisys and the National Center for Manufacturing Sciences (NCMS) partnered on a three-year project awarded by the United States (U.S.) Department of Energy (DOE), to quantify the impacts of LED lamps, incandescent lamps and fluorescent benchmark lamps over a product lifecycle – i.e. to develop a sustainable design and manufacturing strategy that addresses product manufacturing, use, recycling and disposal scenarios for LED-based lighting. Based on the knowledge gained from extensive product tear-down studies of fluorescent and screw-in lighting products, lifecycle assessment tools, and accelerated lifecycle testing protocols, an interactive Sustainable LED Design Guide has been developed to aid architectural and lighting designers and engineers in making design decisions that consider three important environmental impacts (greenhouse gas emissions, energy use and mercury emission) across all phases of the life of an LED lighting product. Critical information developed for the lifecycle analysis and product feature comparisons is the useful life of the lighting product as well as its performance. The Design Guide is available at www.ncms.org, and was developed based on operational and durability testing of a variety of lighting products including power consumption, light output, and useful life of a lamp in order to allow a more realistic comparison of lamp designs. This report describes the main project tasks, results and innovative features of the lifecycle assessment (LCA)-based design tools, and the key considerations driving the sustainable design of LED lighting systems. The Design Guide incorporates the following three novel features for efficiently evaluating LED lighting features in value-chains: • Bill-of-Materials (BOM) Builder – Designers may import process data for each component and supply functional data for the product, including power, consumption, lumen output and expected useful life. • Environmental Impact Review – Designs are comparable across lifecycle phases, subsystems, and environmental impact category, and can be normalized to a userdefined functional unit. • Drill-down Review – These provide an indepth look at individual lamp designs with the ability to review across subsystem or lifecycle phase.

None

2011-06-30T23:59:59.000Z

80

Wyandotte Municipal Serv Comm | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:SeadovCooperative JumpWilliamsonWoodson County,Worden,Wrightsville,WurthServ Comm Jump to:

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Associative list processing unit  

DOE Patents [OSTI]

An associative list processing unit and method comprising employing a plurality of prioritized cell blocks and permitting inserts to occur in a single clock cycle if all of the cell blocks are not full. Also, an associative list processing unit and method comprising employing a plurality of prioritized cell blocks and using a tree of prioritized multiplexers descending from the plurality of cell blocks.

Hemmert, Karl Scott; Underwood, Keith D.

2013-01-29T23:59:59.000Z

82

Building Programming List Procedures  

E-Print Network [OSTI]

1 6.090 Building Programming Experience Lecture 4 1/16/2007 Outline · List Procedures · Compound)) (define (reverse-helper l r) (if (null? l) r (reverse-helper (cdr l) (cons (car l) r)))) list-ref · Write

83

General Service LED Lamps | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensional Subject: Guidance for naturalGeneral Service LED Lamps General

84

LED Lighting Facts | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe10 DOEWashington, DCKickoffLDV HVAC ModelLED Lightbulbs

85

LED Lighting Forecast | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe10 DOEWashington, DCKickoffLDV HVAC ModelLED

86

DOE Lighting Program Update: LED Validation Activities  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTieCelebratePartnersDepartmentforDOE Lighting Program Update LED

87

Join our Webinar for Minority Serving Institutions on Science...  

Office of Environmental Management (EM)

our Webinar for Minority Serving Institutions on Science Education Opportunities This Monday Join our Webinar for Minority Serving Institutions on Science Education Opportunities...

88

Better Buildings Program San Jose - Serving Moderate Income Residents...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Program San Jose - Serving Moderate Income Residents Better Buildings Program San Jose - Serving Moderate Income Residents Provides an overview of the program components and goals,...

89

To Bridge LEDs' Green Gap, Scientists Think Small  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

To Bridge LEDs' Green Gap, Scientists Think Small To Bridge LEDs' Green Gap, Scientists Think Small Nanostructures Half a DNA Strand-Wide Show Promise for Efficient LEDs April 4,...

90

Series Input Modular Architecture for Driving Multiple LEDs  

E-Print Network [OSTI]

, where each cell drives four 700 mA LEDs. Keywords ­ solid-state lighting, light emitting diodes, LED have been achieved over the past decade in solid state light emitting diodes (LEDs), leading to high

91

Quality and Performance of LED Flashlights in Kenya: Common End User Preferences and Complaints  

SciTech Connect (OSTI)

Flashlights that use LED technology have quickly emerged as the dominant source of portable lighting in Kenya. While flashlights do not normally provide a substitute for kerosene and other highly inefficient fuels, they are an important early manifestation of LED lighting in the developing world that can serve as a platform - or deterrent - to the diffusion of the technology into the broader off-grid lighting market. The lead acid batteries embedded in flashlights also represent an important source of hazardous waste, and flashlight durability is thus an important determinant of the rate of waste disposal. Low-cost LED flashlights with prices from $1 to $4 are now widely available in shops and markets throughout Kenya. The increased penetration of LED technology in the flashlight market is significant, as over half of all Kenyan households report owning a flashlight (Kamfor, 2002). While this shift from conventional incandescent technology to modern LEDs may appear to be a promising development, end users that our research team interviewed expressed a number of complaints about the quality and performance of these new flashlights. This raises concerns about the interests of low-income flashlight users, and it may also indicate the onset of a broader market spoiling effect for off-grid lighting products based on LED technology (Mills and Jacobson, 2008; Lighting Africa, 2007). The quality of low-cost LED flashlights can contribute to market spoiling because these products appear to represent the first contact that most Kenyans have with LED technology. In this report, our team uses interviews with 46 end users of flashlights to collect information about their experiences, perceptions, and preferences. We focus especially on highlighting common complaints from respondents about the flashlights that they have used, as well as on noting the features that they indicated were important when evaluating the quality of a flashlight. In previous laboratory tests, researchers from our team found a wide range of quality and performance among battery powered LED lights (Granderson, et al. 2008).

Tracy, Jenny; Jacobson, Arne; Mills, Evan

2009-09-14T23:59:59.000Z

92

(Expired) Nationwide Limited Public Interest Waiver for LED Lighting...  

Energy Savers [EERE]

(Expired) Nationwide Limited Public Interest Waiver for LED Lighting and HVAC Units: February 11, 2010 (Expired) Nationwide Limited Public Interest Waiver for LED Lighting and HVAC...

93

Energy Department Announces New University-Led Projects to Create...  

Office of Environmental Management (EM)

University-Led Projects to Create More Efficient, Lower Cost Concentrating Solar Power Systems Energy Department Announces New University-Led Projects to Create More Efficient,...

94

Research Led by Sandia Reveals Leading-Edge Erosion Significantly...  

Broader source: Energy.gov (indexed) [DOE]

Research Led by Sandia Reveals Leading-Edge Erosion Significantly Reduces Wind Turbine Performance Research Led by Sandia Reveals Leading-Edge Erosion Significantly Reduces Wind...

95

Demonstration Assessment of Light-Emitting Diode (LED) Freezer...  

Broader source: Energy.gov (indexed) [DOE]

Demonstration Assessment of Light-Emitting Diode (LED) Freezer Case Lighting Demonstration Assessment of Light-Emitting Diode (LED) Freezer Case Lighting This document is a report...

96

Demonstration Assessment of Light Emitting Diode (LED) Street...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Demonstration Assessment of Light Emitting Diode (LED) Street Lighting, Final Report Demonstration Assessment of Light Emitting Diode (LED) Street Lighting, Final Report This...

97

Technology Deployment List | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Technologies Technology Deployment Technology Deployment List Technology Deployment List The Federal Energy Management Program's (FEMP) Technology Deployment List features...

98

Assessment of LED Technology in Ornamental Post-Top Luminaires (Host Site: Sacramento, CA)  

SciTech Connect (OSTI)

The DOE Municipal Solid-State Street Lighting Consortium has evaluated four different LED replacements for existing ornamental post-top street lights in Sacramento, California. The project team was composed of the City and its consultant, PNNL (representing the Consortium), and the Sacramento Municipal Utility District. Product selection was finalized in March 2011, yielding one complete luminaire replacement and three lamp-ballast retrofit kits. Computer simulations, field measurements, and laboratory testing were performed to compare the performance and cost-effectiveness of the LED products relative to the existing luminaire with 100 W high-pressure sodium lamp. After it was confirmed the LED products were not equivalent to HPS in terms of initial photopic illumination, the following parameters were scaled proportionally to enable equitable (albeit hypothetical) comparisons: light output, input wattage, and pricing. Four replacement scenarios were considered for each LED product, incorporating new IES guidance for mesopic multipliers and lumen maintenance extrapolation, but life cycle analysis indicated cost effectiveness was also unacceptable. Although LED efficacy and pricing continue to improve, this project serves as a timely and objective notice that LED technology may not be quite ready yet for such applications.

Tuenge, Jason R.

2011-12-01T23:59:59.000Z

99

A Statistical Method Analyzing LED Lumen Depreciation and Projecting LED Life  

SciTech Connect (OSTI)

There is a strong need for a method to represent the potential life of LED products as a critical part of design decisions including cost-effectiveness analysis. The IES LM-80 test method is in place to collect lumen depreciation data but it does not provide for estimation of future long term depreciation. Separate estimation methods are being considered (TM-21) and this paper describes the analysis of a series of LED degradation models and subsequent development of an estimation method. The work involves analysis of a set of engineering models to determine their applicability and define a structure for their use in LED lumen output life based on a lumen output level such as the L70 metric. The analysis has provided valuable information on methods effectively estimating LED life time, and impacts of measurement uncertainties, test duration, interval and other test conditions on selecting degradation models and LED life time projection. A set of guidelines are recommended to estimate LED life from data obtained using the current LM-80 test method.

Qiao, Hong (Amy) [Amy; Pulsipher, Trenton C.; Hathaway, John E.; Richman, Eric E.; Radkov, Emil

2010-05-30T23:59:59.000Z

100

A Practical Primer to LED Technology  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy Cooperation |South Valley ResponsibleSubmissionof Energy 5ofA2011 LED Transformations,

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Decisions that led to Y-12  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phasesData Files Data Files 1B&W Y-12 Tymes &Decisions that led

102

Sandia National Laboratories: efficient LED lighting  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1development Sandia, NRELdeep-waterbiofuels economicallyefficient LED lighting

103

Associative list processing unit  

DOE Patents [OSTI]

An associative list processing unit and method comprising employing a plurality of prioritized cell blocks and permitting inserts to occur in a single clock cycle if all of the cell blocks are not full.

Hemmert, Karl Scott; Underwood, Keith D

2014-04-01T23:59:59.000Z

104

IRB Member List Name Department How I Can Help  

E-Print Network [OSTI]

IRB Member List Name Department How I Can Help Dunn, Joel Information Technology Services Provide to help investigators submit proposals that involve nutrition interventions, including measurements questions. Also general help with the IRB process. Williams, Melissa SERVE Evaluation of study. Hamilton

Saidak, Filip

105

Text-Alternative Version: LED Essentials- Technology, Applications, Advantages, Disadvantages  

Broader source: Energy.gov [DOE]

Below is the text-alternative version of the LED Essentials - Technology, Applications, Advantages, Disadvantages webcast.

106

New and Underutilized Technology: High Bay LED Lighting  

Broader source: Energy.gov [DOE]

The following information outlines key deployment considerations for high bay LED lighting within the Federal sector.

107

Regenerative braking on bicycles to power LED safety flashers  

E-Print Network [OSTI]

This work develops a method for capturing some of the kinetic energy ordinarily lost during braking on bicycles to power LED safety flashers. The system is designed to eliminate: (a) battery changing in popular LED flashers, ...

Collier, Ian M

2005-01-01T23:59:59.000Z

108

LED Manufacturing Process Modifications Will Boost Quality and  

E-Print Network [OSTI]

2012 The Issue Highly energyefficient LightEmitting Diode (LED) lighting products have made great process that will enable LED manufacturers to produce higher quality, energyefficient products at lower

109

EECBG Success Story: Solar LED Light Pilot Project Illuminates...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Solar LED Light Pilot Project Illuminates the Way in Alabama EECBG Success Story: Solar LED Light Pilot Project Illuminates the Way in Alabama September 12, 2012 - 2:15pm Addthis...

110

LEDs Go Ivy League: Princeton’s Dillon Gymnasium  

Broader source: Energy.gov [DOE]

View the video about LED lighting in Dillon Gymnasium, a focal point of sports and recreation at Princeton since 1947. William Evans discusses measurable benefits of LED lighting in the gym and...

111

Text-Alternative Version: Challenges in LED Research and Development  

Broader source: Energy.gov [DOE]

Narrator: LEDs have made remarkable progress in the past decade and gained a strong foothold in the US marketplace. In 2012, LED lighting saved an estimated 71 trillion BTUs, equivalent to annual...

112

Text-Alternative Version: Evaluating LED Street Lighting Solutions  

Broader source: Energy.gov [DOE]

Below is the text-alternative version of the Evaluating LED Street Lighting Solutions webcast, held July 20, 2010.

113

Text-Alternative Version: LEDs for Interior Office Applications  

Broader source: Energy.gov [DOE]

Below is the text-alternative version of the LEDs for Interior Office Applications webcast, held March 18, 2010.

114

Text-Alternative Version: LED Replacements for Linear Fluorescent Lamps  

Broader source: Energy.gov [DOE]

Below is the text-alternative version of the "LED Replacements for Linear Fluorescent Lamps" webcast, held June 20, 2011.

115

Global Studies Course List Fall 2010 (2111) COURSE LIST  

E-Print Network [OSTI]

...........................................................................5 2. Global Economy and Global Governance .................................................9 3 from one of six Global Concentrations (Sustainable Development; Global Economy and Global GovernanceGlobal Studies Course List ­ Fall 2010 (2111) Page 1 COURSE LIST Fall 2010 (2111) Global Studies

Jiang, Huiqiang

2111-01-01T23:59:59.000Z

116

A List of Household Objects for Robotic Retrieval Prioritized by People with ALS (Version 092008)  

E-Print Network [OSTI]

This technical report is designed to serve as a citable reference for the original prioritized object list that the Healthcare Robotics Lab at Georgia Tech released on its website in September of 2008. It is also expected to serve as the primary citable reference for the research associated with this list until the publication of a detailed, peer-reviewed paper. The original prioritized list of object classes resulted from a needs assessment involving 8 motor-impaired patients with amyotrophic lateral sclerosis (ALS) and targeted, in-person interviews of 15 motor-impaired ALS patients. All of these participants were drawn from the Emory ALS Center. The prioritized object list consists of 43 object classes ranked by how important the participants considered each class to be for retrieval by an assistive robot. We intend for this list to be used by researchers to inform the design and benchmarking of robotic systems, especially research related to autonomous mobile manipulation.

Choi, Young Sang; Kemp, Charles C

2009-01-01T23:59:59.000Z

117

DOE Radiation Records Contacts List  

Broader source: Energy.gov [DOE]

DOE radiation records contact list for individuals to obtain records of occupational exposure directly from a DOE site.

118

Cree Sets New Benchmarks for LED Efficacy and Brightness  

Broader source: Energy.gov [DOE]

Cree has successfully created a cool white LED prototype that delivers 107 lm/W at 350mA. This achievement builds on the Cree EZBright® LED chip platform, developed in part with prior funding support from DOE. Cree made the prototype LED under their DOE project focused on developing LED chips incorporating photonic crystal elements for improved light extraction and novel package technology for higher down-conversion efficiency compared to conventional LEDs. Based on a 1 millimeter-square chip, the new prototype LED produces white light with a CCT of 5500K and a CRI of 73. Integration of four of these prototype LEDs can produce luminous flux of more than 450 lumens.

119

High-power LEDs based on InGaAsP/InP heterostructures  

SciTech Connect (OSTI)

High-power light-emitting diodes (LEDs) with mesa diameters of 100, 200, and 300 ?m are developed on the basis of InGaAsP/InP heterostructures. The mesas are close in shape to a truncated cone with a generatrix inclination angle of ?45° in the vicinity of the active region of the LED, with a ring etched around the mesa serving as a reflector. The emission spectra and directivity patterns of these LEDs are studied in a wide range of current densities and it is shown that radiative recombination is dominant to a current density of ?5000 A/cm{sup 2}, which makes these structures promising for the development of high-power LEDs. An emission power of ?14 mW is obtained in the continuous-wave mode (I = 0.2 A, ? = 1.1 ?m), and that of 77 mW, in the pulsed mode (I = 2 A, ? = 1.1 ?m), which corresponds to external quantum efficiencies of 6.2 and 3.4%, respectively.

Rakovics, V. [Hungarian Academy of Sciences, Institute of Technical Physics and Materials Science, Research Centre for Natural Sciences (Hungary); Imenkov, A. N.; Sherstnev, V. V.; Serebrennikova, O. Yu.; Il’inskaya, N. D.; Yakovlev, Yu. P., E-mail: Yak@iropt1.ioffe.ru [Russian Academy of Sciences, Ioffe Physical-Technical Institute (Russian Federation)

2014-12-15T23:59:59.000Z

120

Biomass 2013 Attendee List | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Attendee List Biomass 2013 Attendee List This is a list of attendees for the Biomass 2013 conference. biomass2013attendeelist.pdf More Documents & Publications Biomass 2013...

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

The STAPL pList  

E-Print Network [OSTI]

the number of base containers. Thus, a key feature of the pList is that it offers the advantages of a classical list while enabling scalable parallelism. We evaluate the performance of the stapl pList on an IBM Power 5 cluster and on a CRAY XT4 massively...

Xu, Xiabing

2011-02-22T23:59:59.000Z

122

SoftCast: One Video to Serve All Wireless Receivers  

E-Print Network [OSTI]

The main challenge in wireless video multicast is to scalably serve multiple receivers who have different channel characteristics. Current wireless transmission schemes, however, cannot support smooth degradation. Specifically, ...

Katabi, Dina

2009-02-07T23:59:59.000Z

123

NERSC Email Lists  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challengeMultiscale SubsurfaceExascale Era ComputingDataEmail Lists

124

LEDP - New Listings  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample Environment: Magnet and6ledp/ The listing of new

125

ARM - Topic List  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUC :ProductsSCM ForcingTeachersTopic List Outreach Home Room News Publications

126

Promising Technologies List  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d FNEPA/309DepartmentDepartmentPowerMetalPromising Technologies List

127

Fire Hazards Listing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series toESnet4:EpitaxialtransatlanticUnified| DepartmentFindingHazards Listing

128

CAMD Cleanroom Chemical List  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New Substation Sites Proposed Route Segments (notCAMD Cleanroom Chemical List

129

LED- ja loisteputkivalon vaikutus maitotaloustuotteiden ja perunan laatuun.  

E-Print Network [OSTI]

??Tutkielman kirjallisuuskatsauksessa tarkasteltiin valoa, erilaisia valonlähteitä ja niiden ominaisuuksia. Erityisesti keskityttiin LED (Light Emitting Diode) valoon ja sen ominaisuuksiin, koska sen käyttö myös yleisessä valaistuksessa… (more)

Solala, Kari

2009-01-01T23:59:59.000Z

130

Driver Circuit for White LED Lamps with TRIAC Dimming Control.  

E-Print Network [OSTI]

??An efficient Light Emitting Diode (LED) lamp driver circuit is proposed for retrofitting the conventionally used incandescent lamps with existing TRIAC dimmer. The dimming feature… (more)

Weng, Szu-Jung

2012-01-01T23:59:59.000Z

131

LED Provides Effective and Efficient Parking Area Lighting at...  

Broader source: Energy.gov (indexed) [DOE]

White Light Options for Parking Area Lighting Demonstration Assessment of Light Emitting Diode (LED) Street Lighting, Final Report Guide to FEMP-Designated Parking Lot...

132

The City of Los Angeles LED Streetlight Program  

Broader source: Energy.gov [DOE]

View the video about the Los Angeles LED streetlight program, featuring an interview with City of Los Angeles Bureau of Street Lighting Director, Ed Ebrahimian.

133

ORNL-led team demonstrates desalination with nanoporous graphene...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Communications 865.576.6448 ORNL-led team demonstrates desalination with nanoporous graphene membrane Researchers created nanopores in graphene (red, and enlarged in the circle...

134

Adopting LED Technology: What Federal Facility Managers Need to Know  

Broader source: Energy.gov [DOE]

This document describes the presentation slides for the "Adopting LED Technology: What Federal Facility Managers Need to Know" webinar that took place on September 11, 2014.

135

Deputy Secretary Poneman Announces Team led by Oak Ridge National...  

Office of Environmental Management (EM)

Deputy Secretary Poneman Announces Team led by Oak Ridge National Lab Selected to Receive up to 122 Million for Nuclear Energy Innovation Hub Deputy Secretary Poneman Announces...

136

Article Published on LED Lumen Maintenance and Light Loss Factors...  

Broader source: Energy.gov (indexed) [DOE]

of a comprehensive lifetime rating - as well as the problematic relationship between SSL lifetime and lumen maintenance - determining an appropriate LLD factor for LED products...

137

LEDs Go Ivy League: Princeton University and DOE GATEWAY Demonstrations  

Broader source: Energy.gov [DOE]

View the video about LED lighting at Princeton University, which has dramatically reduced energy costs in a number of installations around campus. William Evans, electrical engineer, describes the...

138

LED Chips and Packaging for 120 LPW SSL Component  

SciTech Connect (OSTI)

Cree has developed a new, high-efficiency, low-cost, light emitting diode (LED) lamp module that should be capable of replacing standard, halogen, fluorescent and metal halide lamps based on the total cost of ownership. White LEDs are produced by combining one or more saturated color LEDs with a phosphor or other light down-converting media to achieve white broad-band illumination. This two year project addressed LED chip and package efficiency improvements to establish a technology platform suitable for low-cost, high-efficiency commercial luminaires. Novel photonic-crystal LEDs were developed to improve the light extraction efficiency of blue GaN-based LEDs compared to the baseline technology. Improved packaging designs that reduced down-conversion and absorption related light losses, led to a higher overall LED efficiency. Specifically, blue LEDs were demonstrated with light output nearing 600 mW and an external quantum efficiency greater than 60 percent (using 1 mm2 chips at an operating current of 350 mA). The results were achieved using a novel, production capable photonic-crystal LED fabrication process. These LEDs formed the basis for a multi-chip white lamp module prototype, which provided 510 lumens light output at a correlated color temperature (CCT) of 3875 K and an operating current of 350 mA per 1mm2 chip. The overall conversion efficiency at 4100 K improved to ~ 65%. The resulting efficacy is 112 lumens per watt (LPW) â?? a 33% improvement over the start of the project. In addition, a proof-of-concept luminaire was demonstrated that provided a flux of 1700 lumens at a 3842 K CCT.

James Ibbetson

2009-09-30T23:59:59.000Z

139

Low Cost Lithography Tool for High Brightness LED Manufacturing  

SciTech Connect (OSTI)

The objective of this activity was to address the need for improved manufacturing tools for LEDs. Improvements include lower cost (both capital equipment cost reductions and cost-ofownership reductions), better automation and better yields. To meet the DOE objective of $1- 2/kilolumen, it will be necessary to develop these highly automated manufacturing tools. Lithography is used extensively in the fabrication of high-brightness LEDs, but the tools used to date are not scalable to high-volume manufacturing. This activity addressed the LED lithography process. During R&D and low volume manufacturing, most LED companies use contact-printers. However, several industries have shown that these printers are incompatible with high volume manufacturing and the LED industry needs to evolve to projection steppers. The need for projection lithography tools for LED manufacturing is identified in the Solid State Lighting Manufacturing Roadmap Draft, June 2009. The Roadmap states that Projection tools are needed by 2011. This work will modify a stepper, originally designed for semiconductor manufacturing, for use in LED manufacturing. This work addresses improvements to yield, material handling, automation and throughput for LED manufacturing while reducing the capital equipment cost.

Andrew Hawryluk; Emily True

2012-06-30T23:59:59.000Z

140

Contract Mapper Full Symbology List  

E-Print Network [OSTI]

Contract Mapper Full Symbology List Colour symbology Operational Support Unit 15th October 2007 Main Road Management Area Other Fell Thin Compartments Sub-Compartments Contract Buffer Order

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Contract Mapper Full Symbology List  

E-Print Network [OSTI]

Contract Mapper Full Symbology List Black & White symbology Operational Support Unit 15th October Compartments Sub-Compartments # # ## Management Area Fell Thin Contract Buffer Other #12;

142

ELECTRONIC PROOF OF SERVICE LIST and ELECTRONIC DISTRIBUTION LIST  

E-Print Network [OSTI]

.state.ca.us Deborah Dyer, Staff Counsel jbabula@energy.state.ca.us Jared Babula, Staff Counsel ronCALIFORNIA ENERGY COMMISSION ELECTRONIC PROOF OF SERVICE LIST and ELECTRONIC DISTRIBUTION LIST Revised 10/15/07 1516 Ninth Street Sacramento, CA 95814 800-822-6228 www.energy.ca.gov STARWOOD

143

Speedy Fruit Yogurt Pudding Makes four cup servings  

E-Print Network [OSTI]

Speedy Fruit Yogurt Pudding Makes four ½ cup servings 1 16-ounce can mixed fruit, unsweetened pudding and drain the juice from the fruit before combining the fruit and pudding. Nutrition information

Florida, University of

144

CoServ Electric Cooperative- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

CoServ Electric Cooperative's "Think Green Rebate Program" provides a range of incentives encouraging its residential customers to upgrade to high efficiency equipment in their homes. Rebates are...

145

Giving Back to Those Who Served | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

as our veterans and their families served our great country with their courage, heart, and sacrifice. For more information on Veterans Day, visit: http:www1.va.govopa...

146

Energy performance listings: Electric chillers  

SciTech Connect (OSTI)

The Energy Performance Listings series provides comparative information across manufacturers on products. The Electric Chillers Listings include more than 600 models with efficiencies that meet or exceed levels contained in the American Society of Heating, Refrigerating and Air-Conditioning Engineers` (ASHRAE) Standard 90.1-1989, Energy Efficient Design of New Buildings Except New Low-Rise Residential Buildings. Information on model energy efficiency levels, performance characteristics, and manufacturer names permits easy selection of top-performing equipment. Each Energy Performance Listing includes an introductory section, two sections of model listings, and an appendix with manufacturer contacts. The first model-listing section presents information in descending order of efficiency for all manufacturers. These efficiency-ordered listings also include the symbol to identify models with efficiencies that meet or exceed U.S. DOE`s Federal Energy Management Program (FEMP). With these listings, users can quickly identify the most efficient product in a particular size range, identify products that meet the efficiency criteria of a specific voluntary program, or determine an efficiency threshold that will include a specific number of manufacturers. The second section of model listings presents products grouped by manufacturer and catalog number, allowing users to quickly find and identify performance information on specific models. Energy Performance Listings are tools that support purchasing and procurement by federal, state, and local governments and others, including utility companies, energy interest groups, and research organizations. The listings may be used for program design and planning purposes, equipment selection, specification, and purchasing decisions. The listings are a product of the Energy-Efficient Procurement Collaborative, Inc. and are available through NYSERDA.

NONE

1997-01-01T23:59:59.000Z

147

LED Lighting: Just the Facts, Please! | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

that it will adequately meet your needs. What it means is that you can have peace of mind when checking out the label-that the information listed is accurate. You still need to...

148

LED traffic lights: New technology signals major energy savings  

SciTech Connect (OSTI)

Using light-emitting diode technology to replace incandescent lamps in traffic signals promises energy savings upwards of 60 percent for each of the estimated quarter of a million controlled intersections in the United States. LED units use only 9 to 25 watts instead of the 67 to 150 watts used by each incandescent lamp. Though their first cost is relatively high, energy savings result in paybacks of 1 to 5 years. LED retrofit kits are available for red signal disks and arrows, and installations in several states have proven successful, although minor improvements are addressing concerns about varying light output and controller circuitry. Retrofitting green lamps is not yet feasible, because color standards of the Institute of Traffic Engineers cannot be met with existing LED technology. Yellow lamps have such low duty factors (they`re on only 3 percent of the time) that retrofitting with LED signals is not cost-effective. LEDs last much longer than incandescents, allowing municipalities to not only reduce their electricity bills, but to save on maintenance costs as well. As further incentive, some utilities are beginning to implement rebate programs for LED traffic signal retrofits. Full approval of LED units is still awaited from the Institute of Traffic Engineers (ITE), the standard-setting body for traffic safety devices. Local and state governments ultimately decide what specifications to require for traffic lights, and the growing body of successful field experience with LEDs appears to be raising their comfort level with the technology. The California Department of Transportation is developing an LED traffic light specification, and two California utilities, Southern California Edison and Pacific Gas and Electric, have provided rebates for some pilot installations.

Houghton, D.

1994-12-31T23:59:59.000Z

149

LOW-COST LED LUMINAIRE FOR GENERAL ILLUMINATION  

SciTech Connect (OSTI)

During this two-year Solid-State Lighting (SSL) Manufacturing R&D project Cree developed novel light emitting diode (LED) technologies contributing to a cost-optimized, efficient LED troffer luminaire platform emitting at ~3500K correlated color temperature (CCT) at a color rendering index (CRI) of >90. To successfully achieve program goals, Cree used a comprehensive approach to address cost reduction of the various optical, thermal and electrical subsystems in the luminaire without impacting performance. These developments built on Cree’s high- brightness, low-cost LED platforms to design a novel LED component architecture that will enable low-cost troffer luminaire designs with high total system efficacy. The project scope included cost reductions to nearly all major troffer subsystems as well as assembly costs. For example, no thermal management components were included in the troffer, owing to the optimized distribution of compact low- to mid-power LEDs. It is estimated that a significant manufacturing cost savings will result relative to Cree’s conventional troffers at the start of the project. A chief project accomplishment was the successful development of a new compact, high-efficacy LED component geometry with a broad far-field intensity distribution and even color point vs. emission angle. After further optimization and testing for production, the Cree XQ series of LEDs resulted. XQ LEDs are currently utilized in Cree’s AR series troffers, and they are being considered for use in other platforms. The XQ lens geometry influenced the independent development of Cree’s XB-E and XB-G high-voltage LEDs, which also have a broad intensity distribution at high efficacy, and are finding wide implementation in Cree’s omnidirectional A-lamps.

Lowes, Ted

2014-07-31T23:59:59.000Z

150

Qualification Status List (QSL Package)  

E-Print Network [OSTI]

qualification of Array B. These open items are summarized on page 2 and the equipment subsections which follow#12;ALSEP Qualification Status List (QSL Package) Flight 3 Configuration #12;NO. ltiY. NO. RI!V. NO. Qualification Status List ALSEP Array B Configuration 1. 0 INTRODUCTION ATM 825 PAGI! 1

Rathbun, Julie A.

151

Optimized Phosphors for Warm White LED Light Engines  

SciTech Connect (OSTI)

The objective of this program is to develop phosphor systems and LED light engines that have steady-state LED efficacies (using LEDs with a 60% wall-plug efficiency) of 105–120 lm/W with correlated color temperatures (CCT) ~3000 K, color rendering indices (CRI) >85, <0.003 distance from the blackbody curve (dbb), and <2% loss in phosphor efficiency under high temperature, high humidity conditions. In order to reach these goals, this involves the composition and processing optimization of phosphors previously developed by GE in combination with light engine package modification.

Setlur, Anant; Brewster, Megan; Garcia, Florencio; Hill, M. Christine; Lyons, Robert; Murphy, James; Stecher, Tom; Stoklosa, Stan; Weaver, Stan; Happek, Uwe; Aesram, Danny; Deshpande, Anirudha

2012-07-30T23:59:59.000Z

152

EECBG Success Story: Small Nebraska Town Welcomes LEDs and Energy...  

Energy Savers [EERE]

Nebraska Town Welcomes LEDs and Energy Savings EECBG Success Story: Small Town Using Wind Power to Offset Electricity Costs EECBG Success Story: Out with the Old, In with the New:...

153

MOF Coating a Promising Path to White LEDs  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

(MOF); the structure was determined at Beamline 11.3.1. Coating a blue light-emitting diode (LED) with this compound readily generates white light with high luminous...

154

Implementing and Sustaining Operator Led Energy Efficiency Improvements  

E-Print Network [OSTI]

, to significantly reduce energy consumption, the site must focus on a strategic approach which involves developing, implementing and sustaining a client specific program of energy optimization. We discuss ways of sustaining energy performance through operator led...

Hoyle, A.; Knight, N.; Rutkowski, M.

2011-01-01T23:59:59.000Z

155

LED Traffic Lights Get Buy American Stamp | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Traffic Lights Get Buy American Stamp November 30, 2010 - 10:19am Addthis Red. Yellow. Green. What LED traffic signals don't say: Made in USA. That is changing. Dialight...

156

Demonstrating LED and Fiber Optic Lighting in Commissary Applications  

Broader source: Energy.gov [DOE]

Presentation—given at the Federal Utility Partnership Working Group (FUPWG) Fall 2008 meeting—covers goals of the project and applications for light-emitting diodes (LEDs) and fiber optic lighting.

157

WEBINAR: LED LIGHTING IN A PERFORMING ARTS BUILDING  

Broader source: Energy.gov [DOE]

Can LEDs render skin tones and makeup accurately in a dressing room? Can they provide the vertical footcandles in a studio to make dancers' bodies visible, or deliver acting studio lighting to...

158

Advances in Chip Technology, Packaging Enable White LED Breakthroughs  

Broader source: Energy.gov [DOE]

Significant advances in chip technology have enabled Cree, Inc.'s Santa Barbara Technology Center to demonstrate white LEDs with record efficacies as high as 74 lumens per watt - on par with...

159

Have You Used LED Light Strings? | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

read about LED holiday light strings, which can use 90% less energy than regular incandescent light strings. You may even be able to save on the initial costs with rebates from...

160

Better than CFL? Dimmable LED Downlights in Hospitality Facilities Webinar  

Broader source: Energy.gov [DOE]

LEDs represent less than 1% of the installed base of U.S. downlights, which in 2012 numbered about 700 million. In hospitality facilities, past efforts to reduce lighting energy use have mainly...

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Laboratory Evaluation of LED T8 Replacement Lamp Products  

SciTech Connect (OSTI)

A report on a lab setting analysis involving LED lamps intended to directly replace T8 fluorescent lamps (4') showing light output, power, and economic comparisons with other fluorescent options.

Richman, Eric E.; Kinzey, Bruce R.; Miller, Naomi J.

2011-05-23T23:59:59.000Z

162

Text-Alternative Version: LED Color Stability Webinar  

Broader source: Energy.gov [DOE]

Michael Royer: All right, welcome ladies and gentleman. I'm Michael Royer of Pacific Northwest National Laboratory, and I'd like to welcome you to today's webinar on LED Color Stability, Ten...

163

White LED Benchmark of 65 Lumens Per Watt Achieved  

Broader source: Energy.gov [DOE]

Novel chip design and the balance of multiple interrelated design parameters have enabled Cree, Inc.'s Santa Barbara Technology Center to demonstrate white LEDs with efficacies greater than 65 lumens per watt at 350 mA. The results are particularly significant because they were achieved with a pre-production prototype chip using the same package used in Cree's commercially available XLamp® 7090 high power LED, rather than a laboratory device.

164

An Integrated Solid-State LED Luminaire for General Lighting  

SciTech Connect (OSTI)

A strong systems approach to designing and building practical LED-based replacement lamps is lacking. The general method of taking high-performance LEDs and marrying them to standard printed circuit boards, drivers and a heat sink has fallen short of the promise of LED lighting. In this program, a top-down assessment of requirements and a bottom-up reinvention of LED sources, electronics, optics and mechanics have resulted in the highest performance lamp possible. The team, comprised of Color Kinetics, the leaders in LED lighting and Cree, the leaders in LED devices took an approach to reinvent the package, the driver and the overall form and aesthetic of a replacement source. The challenge was to create a new benchmark in LED lighting - the resultant lamp, a PAR38 equivalent, met the light output, color, color quality and efficacy marks set out in the program as well as being dimmable, which is important for market acceptance. The approach combined the use of multiple source die, a chip-on-board approach, a very efficient driver topology, the use of both direct emission and phosphor conversion, and a unique faceted optic to avoid the losses, artifacts and hotspots of lensed approaches. The integral heat sink provided a mechanical base and airflow using a chimney-effect for use in a wide variety of locations and orientations. These research results led to a much better understanding of the system effects of component level technologies. It was clear that best-of-breed sub-system results do not necessarily result in the best end result for the complete system. In doing this work, we did not neglect the practical aspects of these systems. These were not rarified results and commercially impractical but lent themselves to eventual commercial products in the marketplace. The end result - a high performance replacement lamp - will save significant energy while providing a high-quality light source.

Kevin Dowling; Fritz Morgan Ihor Lys; Mike Datta; Bernd Keller; Thomas Yuan

2009-03-31T23:59:59.000Z

165

Integrated LED-based luminare for general lighting  

DOE Patents [OSTI]

Lighting apparatus and methods employing LED light sources are described. The LED light sources are integrated with other components in the form of a luminaire or other general purpose lighting structure. Some of the lighting structures are formed as Parabolic Aluminum Reflector (PAR) luminaires, allowing them to be inserted into conventional sockets. The lighting structures display beneficial operating characteristics, such as efficient operation, high thermal dissipation, high output, and good color mixing.

Dowling, Kevin J.; Lys, Ihor A.; Roberge, Brian; Williamson, Ryan C.; Roberts, Ron; Datta, Michael; Mollnow, Tomas; Morgan, Frederick M.

2013-03-05T23:59:59.000Z

166

Biomass 2014 Attendee List | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Biomass 2014 Attendee List Biomass 2014 Attendee List This document is the attendee list for Biomass 2014, held July 29-July 30 in Washington, D.C. biomass2014attendeelist.pdf...

167

The McCoy List  

E-Print Network [OSTI]

The McCoy List A pub Iicat ion of The DeFores t Ke1 ley Fan Communique 3717 S. LaCienega Blvd. #29 1nglewood, CA 90301 The McCoy List Introduction Hi, If you're a Doctor McCoy fan, you're going io find the following pages a treasure trove... of informat ion. Not only have we listed every McCoy story we could find (including those where he is featured promtnently), but have also given you a thumbnai1 synopsis of what the story is about. If you're hooked on a certain writer like Connie Faddis...

1989-01-01T23:59:59.000Z

168

Energy & Manufacturing Workforce Training Topics List - Version...  

Broader source: Energy.gov (indexed) [DOE]

View this searchable list of the training programs in the areas of energy andor manufacturing. Information provided in this list includes: the subjects being taught, grantee,...

169

Technology Deployment List | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Technology Deployment List Technology Deployment List Spreadsheet details new and underutilized technologies ranked for Federal deployment by the Federal Energy Management Program....

170

Highly Efficient Small Form Factor LED Retrofit Lamp  

SciTech Connect (OSTI)

This report summarizes work to develop a high efficiency LED-based MR16 lamp downlight at OSRAM SYLVANIA under US Department of Energy contract DE-EE0000611. A new multichip LED package, electronic driver, and reflector optic were developed for these lamps. At steady-state, the lamp luminous flux was 409 lumens (lm), luminous efficacy of 87 lumens per watt (LPW), CRI (Ra) of 87, and R9 of 85 at a correlated color temperature (CCT) of 3285K. The LED alone achieved 120 lumens per watt efficacy and 600 lumen flux output at 25 C. The driver had 90% electrical conversion efficiency while maintaining excellent power quality with power factor >0.90 at a power of only 5 watts. Compared to similar existing MR16 lamps using LED sources, these lamps had much higher efficacy and color quality. The objective of this work was to demonstrate a LED-based MR16 retrofit lamp for replacement of 35W halogen MR16 lamps having (1) luminous flux of 500 lumens, (2) luminous efficacy of 100 lumens per watt, (3) beam angle less than 40{sup o} and center beam candlepower of at least 1000 candelas, and (4) excellent color quality.

Steven Allen; Fred Palmer; Ming Li

2011-09-11T23:59:59.000Z

171

Science Serv.ice Feature Released upn receipt  

E-Print Network [OSTI]

Science Serv.ice Feature Released upn receipt but intended for use March 28, 1933 'i 'IJI.IY TKE m estiraating the t o t a l number of lightning flashes, since whiibe som thunderstorms produce only a fern discharges of lightnhg - Say one t o a dozen - there are others that produce thousands. B i s is In one Npine

172

CityBizList US Green Building Council -MD Celebrating Move to  

E-Print Network [OSTI]

CityBizList US Green Building Council - MD Celebrating Move to Hunt Valley Share Email this Article Baltimore County Executive Jim Smith will join the U.S. Green Building Council Maryland to celebrate Horst, Senior Vice President, U.S. Green Building Council. Horst has served as chair of USGBC's LEED

173

Tests gauge LED sensors for fuel-dye measurements  

SciTech Connect (OSTI)

The goal of this work was to develop a low cost, robust sensor to allow direct measurement of Solvent Red 164 dye concentration in off-road fuel at refineries and fuel terminals. Optical absorption sensors based on light emitting diodes (LEDs) are rugged, low-cost, have low power consumption, and can be designed to be intrinsically safe.LED-based systems have been used in a variety of chemical detection applications including heavy metals, pH, CO2, and O2. The approach for this work was to develop a sensor that could be mounted on a pipeline sight glass, precluding the need for direct contact of the sensor with the fuel. Below is described the design and testing of three different LED/photodiode sensors utilizing reflectance spectrometry for the measurement of dye concentration.

Ozanich, Richard M.; Lucke, Richard B.; Melville, Angela M.; Wright, Bob W.

2009-10-19T23:59:59.000Z

174

An LED-based Flasher System for VERITAS  

E-Print Network [OSTI]

We describe a flasher system designed for use in monitoring the gains of the photomultiplier tubes used in the VERITAS gamma-ray telescopes. This system uses blue light-emitting diodes (LEDs) so it can be operated at much higher rates than a traditional laser-based system. Calibration information can be obtained with better statistical precision with reduced loss of observing time. The LEDs are also much less expensive than a laser. The design features of the new system are presented, along with measurements made with a prototype mounted on one of the VERITAS telescopes.

Hanna, D; McCutcheon, M; Nikkinen, L; 10.1016/j.nima.2009.10.107

2009-01-01T23:59:59.000Z

175

Global Rebalancing: US Protection versus Europe-led reflation  

E-Print Network [OSTI]

impact of a Europe-led reflation is re-enforced by the strong income and trade linkages with middle- income and poor regions of the world (eg, Eastern Europe, Latin America and Africa)18. An EU-led reflation supposes a set of demand... switching on the required scale within an acceptable time frame. The central point is that the extra growth cannot come entirely or even chiefly from Asia (where resources are already stretched to the limit), but must come from a combination of renewed EU...

Irvin, George; Izurieta, Alex

2006-01-01T23:59:59.000Z

176

The Elusive “Life” of LEDs: How TM-21 Contributes to the Solution  

SciTech Connect (OSTI)

This magazine article discusses the issue of LED 'lifetime' and explains where TM-21 plays as part of the solution to this issue. In August 2011, the Illuminating Engineering Society (IES) published the TM-21 document entitled 'Lumen degradation lifetime estimation method for LED light sources.' TM-21 is the IES-recommended method for projecting lumen degradation of an LED package, array or module based on data collected according to LM-80. The lighting community expects TM-21 to become the standard method for projecting useful LED lighting product life at realistic operating temperature. This article presents the development process behind TM-21, and clarifies how and when to apply the lifetime extrapolation method to arrive at reasonable and useful estimations. Why TM-21 and why now? We are all familiar with the very real but sometimes exaggerated long-life attributes of LED technology. Not the least of these is the potential for very long life that helps make it an attractive design choice. The trick has been and continues to be how to measure or estimate this longevity to provide assurance to users of this technology's reliability (life) compared to other options. We also understand that the overall reliability of a complete LED lighting fixture can be affected by the reliability of individual product components (driver, lens, etc.) and should be accounted for in lifetime estimations. The useful life of standard lighting technologies is defined as the time to filament or cathode failure. For most of these lamps, the time period prior to failure exhibits acceptable levels of light output, as shown with the solid lines in Fig. 1. This makes it easy to determine when to replace the lamp. However, LEDs do not have filament burn-out that conveniently announces the end of life (dashed line in Fig. 1). Further, the rapid development of the technology and the desire to bring products to market in a timely manner does not allow for actual testing verification of the long lives claimed (100,000 or even 35,000 hours). As a result, the industry has come to accept a definition of the end of the useful life of an LED as the point when it no longer provides a specified level of light output. And finally, the life and performance of LED lighting products depends greatly on excess heat retained at the diode. This is why LEDs require testing at multiple temperatures such that when a source is installed in a luminaire, its actual operating temperature can be measured and lumen depreciation of the product can be derived. Therefore, to serve the solid-state lighting industry, the Technical Procedures Committee (TPC) of the IES proceeded to develop appropriate tests for use in rating LED product longevity. The initial need was a measure of the basic lumen degradation of LED source components identified by a module, package, or array of diodes and this came in the form of LM-80. Importantly, LM-80 only specifies how to measure lumen depreciation to a minimum of 6000 hours (but recommends testing to 10,000 hours or longer). LM-80 stops short of using that data to estimate any depreciation after that, which is where TM-21 comes in. The TM-21 working group (WG) as part of the IES TPC was formed to develop the lumen depreciation projection method and spent over three years exploring many options. The WG evaluated various projection options starting with an analysis of various mathematical, engineering-based models to provide effective depreciation fit and a useful projection method. Next, the WG analyzed LED lumen maintenance behavior using over 40 sets of LM-80-08 test data (20 sets with 10,000 hours or more) collected from four major LED manufacturers. The working group also examined the accuracy of proposed projections using various proposed models and LM-80 data that extended up to 15,000 hours.

Richman, Eric E.

2011-11-18T23:59:59.000Z

177

Development and Evaluation of an Advanced LED Warning System for  

E-Print Network [OSTI]

.dot.state.mn.us/stateaid/sa_traffic_safety.html #12;Project Need · ITS Safety Plan: ITS Critical Strategy 5: Use Intersection Collision Warning.g. radar) · Utilize alternative energy source (solar and/or wind) · Utilize LED blinker signs #12;Before;Stop Case 2: #12;Roll-through Case: #12;Acknowledgments and Special Thanks · Local Road Research Board

Minnesota, University of

178

ECE 466: LED Lighting Systems -Incandescent lightings rise and  

E-Print Network [OSTI]

versus cost - Power Electronic Drives for CFL and LED light sources to achieve dimmable operation - Basic electric AC and DC circuits at Sophomore level or equivalents Absolutes Lighting System Requirements index as a metric of a light source - Power Electronic Energy sources driving light sources in a compact

Schumacher, Russ

179

Biofuels in the ASEAN Low Emission Development Strategies (LEDS) Forum  

E-Print Network [OSTI]

9/20/2012 1 Biofuels in the ASEAN Low Emission Development Strategies (LEDS) Forum Bangkok, Thailand 19-21 September 2012 Biofuel Policy Group Asian Institute of Technology Outline of the Presentation 1. Objectives of this Presentation 2. Background 3. Status of Biofuel Development in ASEAN 4

180

An Brief Overview Of Using LEDs In Lab  

E-Print Network [OSTI]

Diodes · A Light-Emitting Diode (LED) is a special type of diode that emits photons (light) when current ­ Forward biased Diode Operation 0 V 5 V Current ~0 high (too high)5 V 0 V I anode cathode #12;3 Light-Emitting

Baas, Bevan

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Small Area Array-Based LED Luminaire Design  

SciTech Connect (OSTI)

This report contains a summary of technical achievements during a three-year project to demonstrate high efficiency LED luminaire designs based on small area array-based gallium nitride diodes. Novel GaN-based LED array designs are described, specifically addressing the thermal, optical, electrical and mechanical requirements for the incorporation of such arrays into viable solid-state LED luminaires. This work resulted in the demonstration of an integrated luminaire prototype of 1000 lumens cool white light output with reflector shaped beams and efficacy of 89.4 lm/W at CCT of 6000oK and CRI of 73; and performance of 903 lumens warm white light output with reflector shaped beams and efficacy of 63.0 lm/W at CCT of 2800oK and CRI of 82. In addition, up to 1275 lumens cool white light output at 114.2 lm/W and 1156 lumens warm white light output at 76.5 lm/W were achieved if the reflector was not used. The success to integrate small area array-based LED designs and address thermal, optical, electrical and mechanical requirements was clearly achieved in these luminaire prototypes with outstanding performance and high efficiency.

Thomas Yuan

2008-01-09T23:59:59.000Z

182

Ultratech Develops an Improved Lithography Tool for LED Wafer Manufacturing  

Broader source: Energy.gov [DOE]

Ultratech modified an existing lithography tool used for semiconductor manufacturing to better meet the cost and performance targets of the high-brightness LED manufacturing industry. The goal was to make the equipment compatible with the wide range of substrate diameters and thicknesses prevalent in the industry while reducing the capital cost and the overall cost of ownership (COO).

183

EM-Led Radiological Incident Response Program Receives Honors  

Broader source: Energy.gov [DOE]

A program led by EM’s Carlsbad Field Office (CBFO) that coordinates analytical capabilities throughout DOE for response to potential national radiological incidents recently received recognition for the best-in-track poster at a waste management conference earlier this year.

184

LED traffic signals: A market transformation opportunity assessment  

SciTech Connect (OSTI)

This report examines the feasibility and appropriateness of market intervention strategies to increase the penetration of LED traffic signals, which offer large energy savings and other benefits relative to existing incandescent traffic signals. It presents the state of the technology and some of the technical challenges that remain. Prepared for the Consortium for Energy Efficiency.

Suozzo, M.

1998-12-31T23:59:59.000Z

185

Save Time and Money... Serve Nutritious Fruits and Vegetables.  

E-Print Network [OSTI]

- ing, instead of butter or margarine. . ? Get vitamin C from oranges, grapefruit, straw berries, cantaloup, broccoli, cabbage, spinach, peppers, white and sweet potatoes, and tomatoes. ? To retain vitamin C while cooking cabbage, try "panning...." For six servings, add 1 % quarts of finely shredded cabbage to 1 % -2 tablespoons mar ari ne ina heavy pan over moderate heat. Add 3 t ? espoons water and cover pan tightly to hold in steam. Cook over low heat for 6-8 minutes or until cabbage...

Anonymous,

1979-01-01T23:59:59.000Z

186

130 LPW 1000 Lm Warm White LED for Illumination  

SciTech Connect (OSTI)

An illumination-grade warm-white LED, having correlated color temperature (CCT) between 2700 and 3500 K and capable of producing 1000 lm output at over 130 lm/W at room temperature, has been developed in this program. The high-power warm-white LED is an ideal source for use in indoor and outdoor lighting applications. Over the two year period, we have made the following accomplishments: • Developed a low-cost high-power white LED package and commercialized a series of products with CCT ranging from 2700 to 5700 K under the product name LUXEON M; • Demonstrated a record efficacy of 124.8 lm/W at a flux of 1023 lm, CCT of 3435 K and color rendering index (CRI) over 80 at room temperature in the productized package; • Demonstrated a record efficacy of 133.1 lm/W at a flux of 1015 lm, CCT of 3475 K and CRI over 80 at room temperature in an R&D package. The new high-power LED package is a die-on-ceramic surface mountable LED package. It has four 2 mm2 InGaN pump dice, flip-chip attached to a ceramic submount in a 2x2 array configuration. The submount design utilizes a design approach that combines a high-thermal- conductivity ceramic core for die attach and a low-cost and low-thermal-conductivity ceramic frame for mechanical support and as optical lens carrier. The LED package has a thermal resistance of less than 1.25 K/W. The white LED fabrication also adopts a new batch level (instead of die-by-die) phosphor deposition process with precision layer thickness and composition control, which provides not only tight color control, but also low cost. The efficacy performance goal was achieved through the progress in following key areas: (1) high-efficiency royal blue pump LED development through active region design and epitaxial growth quality improvement (funded by internal programs); (2) improvement in extraction efficiency from the LED package through improvement of InGaN-die-level and package-level optical extraction efficiency; and (3) improvement in phosphor system efficiency by improving the lumen equivalent (LE) and phosphor package efficiency (PPE) through improvement in phosphor-package interactions. The high-power warm-white LED product developed has been proven to have good reliability through extensive reliability tests. The new kilo-lumen package has been commercialized under the product name LUXEON M. As of the end of the program, the LUXEON M product has been released in the following CCT/CRI combinations: 3000K/70, 4000K/70, 5000K/70, 5700K/70, 2700K/80, 3000K/80 and 4000K/80. LM-80 tests for the products with CCTs of 4000 K and higher have reached 8500 hours, and per IESNA TM-21-11 have established an L70 lumen maintenance value of >51,000 hours at A drive current and up to 120 °C board temperature.

Soer, Wouter

2012-06-14T23:59:59.000Z

187

KLA-Tencor's Inspection Tool Reduces LED Manufacturing Costs  

Broader source: Energy.gov [DOE]

With the help of DOE funding, KLA-Tencor is developing an improved inspection tool for LED manufacturing that promises to significantly increase overall process yields and minimize expensive waste. The power of the inspection tool lies in optical detection techniques coupled with defect source analysis software to statistically correlate front-end geometric anomalies in the substrate to killer defects on the back end of the manufacturing line, which give rise to an undesirable or unusable end product.

188

OSRAM SYLVANIA Develops High-Efficiency LED Troffer Replacement  

Broader source: Energy.gov [DOE]

With the help of DOE funding, OSRAM SYLVANIA is developing a high-efficiency LED 2'x2' troffer replacement that is expected to be commercially available in the spring of 2012 and to be cost-competitive with existing troffers of that size. It is projected to have a light output of up to 4,000 lumens, an efficacy of more than 100 lm/W, and a CCT of 3500K.

189

LED Traffic Lights Get Buy American Stamp | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe10 DOEWashington, DCKickoffLDV HVAC ModelLEDLightsLED

190

Northern Indiana Pub Serv Co | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoading map...(Utility Company)References ↑ US CensusNortheast SustainableClusterPub Serv Co

191

Davison Health Center Price List*  

E-Print Network [OSTI]

student account. Please see a Health Center representative for more information. Under the Affordable CareDavison Health Center Price List* Beginning Fall 2013, visits and most services to the Health Act, many of the immunizations and lab tests below are covered by insurance (sexual health testing

Royer, Dana

192

DEAN'S LIST Spring Semester 2010  

E-Print Network [OSTI]

. Campbell, Eric B. Cascketta, Eric C. Grantham, Jack D. Gross, Glendon Marston Grusenmeyer, Christopher RDEAN'S LIST Spring Semester 2010 Chai, Jun Christopher, Joseph Thomas Chu, Clayton N. Chu, Wesley D. Bloom, John Tyler Bond-Choquette, Claire Marie Bradford, Jonathan W. Brown, Thomas C. Bruns, Jared M

Wong, Pak Kin

193

LED Retrofit Project in TSH Basement On July 14 2014, McMaster Facilities Services completed an energy conservation lighting  

E-Print Network [OSTI]

replaced with the new LED (light emitting diode) tubes. LEDs have better lighting quality, lower energy

Haykin, Simon

194

Denton County Electric Cooperative d/b/a CoServ Electric Smart...  

Open Energy Info (EERE)

Denton County Electric Cooperative dba CoServ Electric Smart Grid Project Jump to: navigation, search Project Lead Denton County Electric Cooperative dba CoServ Electric...

195

Application Summary Report 22: LED MR16 Lamps  

SciTech Connect (OSTI)

This report analyzes the independently tested photometric performance of 27 LED MR16 lamps. It describes initial performance based on light output, efficacy, distribution, color quality, electrical characteristics, and form factor, with comparisons to a selection of benchmark halogen MR16s and ENERGY STAR qualification thresholds. Three types of products were targeted. First, CALiPER sought 3000 K lamps with the highest rated lumen output (i.e., at least 500 lm) or a claim of equivalency to a 50 W halogen MR16 or higher. The test results indicate that while the initial performance of LED MR16s has improved across the board, market-available products still do not produce the lumen output and center beam intensity of typical 50 W halogen MR16 lamps. In fact, most of the 18 lamps in this category had lower lumen output and center beam intensity than a typical 35 W halogen MR16 lamp. Second, CALiPER sought lamps with a CRI of 90 or greater. Only four manufacturers were identified with a product in this category. CALiPER testing confirmed the performance of these lamps, which are a good option for applications where high color fidelity is needed. A vast majority of the LED MR16 lamps have a CRI in the low 80s; this is generally acceptable for ambient lighting, but may not always be acceptable for focal lighting. For typical LED packages, there is a fundamental tradeoff between CRI and efficacy, but the lamps in the high-CRI group in this report still offer comparable performance to the rest of the Series 22 products in other performance areas. Finally, CALiPER sought lamps with a narrow distribution, denoted as a beam angle less than 15°. Five such lamps were purchased. Notably, no lamp was identified as having high lumen output (500 lumens or greater), high CRI (90 or greater), a narrow distribution (15° or less), and an efficacy greater than 60 lm/W. This would be an important achievement for LED MR16s especially if output could reach approximately 700 800 lumens, or the approximate equivalent of a 50 W halogen MR16 lamp. Many factors beyond photometric performance should be considered during specification. For example, performance over time, transformer and dimmer compatibility, and total system performance are all critical to a successful installation. Subsequent CALiPER reports will investigate more complex issues.

Royer, Michael P.

2014-07-23T23:59:59.000Z

196

LED Site Lighting in the Commercial Building Sector: Opportunities, Challenges, and the CBEA Performance Specification  

Broader source: Energy.gov [DOE]

This March 26, 2009 webcast presented information about the Commercial Building Energy Alliances' (CBEA) efforts to explore the viability of LED site lighting in commercial parking lots. LED...

197

REA Refrigerated Display Case LED Lighting Performance Specification |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L dDepartment ofList? | Department ofDepartment6

198

High Efficacy Green LEDs by Polarization Controlled MOVPE  

SciTech Connect (OSTI)

Amazing performance in GaInN/GaN based LEDs has become possible by advanced epitaxial growth on a wide variety of substrates over the last decade. An immediate push towards product development and worldwide competition for market share have effectively reduced production cost and generated substantial primary energy savings on a worldwide scale. At all times of the development, this economic pressure forced very fundamental decisions that would shape huge industrial investment. One of those major aspects is the choice of epitaxial growth substrate. The natural questions are to what extend a decision for a certain substrate will limit the ultimate performance and to what extent, the choice of a currently more expensive substrate such as native GaN could overcome any of the remaining performance limitations. Therefore, this project has set out to explore what performance characteristic could be achieved under the utilization of bulk GaN substrate. Our work was guided by the hypotheses that line defects such as threading dislocations in the active region should be avoided and the huge piezoelectric polarization needs to be attenuated – if not turned off – for higher performing LEDs, particularly in the longer wavelength green and deep green portions of the visible spectrum. At their relatively lower performance level, deep green LEDs are a stronger indicator of relative performance improvements and seem particular sensitive to the challenges at hand. The project therefore made use of recently developed non-polar and semipolar bulk GaN substrates that were made available at Kyma Technologies by crystallographic cuts from thick polar growth of GaN. This approach naturally leads to rather small pieces of substrates, cm along the long side while mm along the short one. Small size and limited volume of sample material therefore set the limits of the ensuing development work. During the course of the project we achieved green and deep green LEDs in all those crystal growth orientations: polar c-plane, non- polar a-plane, non-polar m-plane, and semipolar planes. The active region in those structures shows dramatically reduced densities of threading dislocations unless the wavelength was extended as far as 510 nm and beyond. With the appearance of such defects, the light output power dropped precipitously supporting the necessity to avoid any and all of such defects to reach the active region. Further aspects of the non-polar growth orientation proved extremely promising for the development of such structures. Chief among them is our success to achieve extremely uniform quantum wells in these various crystal orientations that prove devoid of any alloy fluctuation beyond the theoretical limit of a binominal distribution. This became very Rensselaer Wetzel DE?EE0000627 3 directly apparent in highly advanced atom probe tomography performed in collaboration at Northwestern University. Furthermore, under reduced or absence of piezoelectric polarization, green emitters in those growth geometries exhibit an unsurpassed wavelength stability over very wide excitation and drive current ranges. Such a performance had not been possible in any polar c-plane growth and now places green LEDs in terms of wavelength stability up par with typical 450 nm blue emitters. The project also incorporated enabling opportunities in the development of micro and nano- patterned substrate technologies. Originally developped as a means to enhance generated light extraction we have demonstrated that the method of nano-patterning, in contrast to micro- patterning also results in a substantial reduction of threading dislocation generation. In green LEDs, we thereby see equal contributions of enhanced light extraction and reduced defect generation to a threefold enhancement of the green light output power. These results have opened entirely new approaches for future rapid and low cost epitaxial material development by avoidance of thick defect accommodation layers. All methods developed within this project have meanwhile widely been publicized by the members o

Wetzel, Christian

2013-03-31T23:59:59.000Z

199

MRS Photodiode, LED and extruded scintillator performance in magnetic field  

SciTech Connect (OSTI)

The experimental results on the performance of the MRS (Metal/Resistor/Semiconductor) photodiode in the strong magnetic field of 4.4T, and the possible impact of the quench of the magnet at 4.5T on sensor's operation are reported. In addition, the experimental results on the performance of the extruded scintillator and WLS fiber, and various LEDs in the magnetic fields of 1.8T and 2.3T respectively, are detailed. The measurement method used is being described.

Beznosko, D.; Blazey, G.; Dyshkant, A.; Francis, K.; Kubik, D.; Rykalin, V.; Zutshi, V.; /Northern Illinois U.

2005-05-01T23:59:59.000Z

200

Novel Structured LED and OLED Devices - Energy Innovation Portal  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the Contributions andDataNationalNewportBig Eddyof H-2NovelSolarNovel Structured LED and

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

LED Lights for All Occasions | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample Environment: Magnet and6 th7525T3Scoringimpacts®LED

202

LED Holiday Lights: Festive, Safe, and Efficient! | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe10 DOEWashington, DCKickoffLDV HVAC Model DevelopmentHolidayLED

203

Low-Cost LED Luminaire for General Illumination  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe10IO1OP001Long-Termpaul_fini@cree.com CREE SBTC Low-Cost LED

204

Energy - LEDs to light UT arena | ornl.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing Zirconia Nanoparticles asSecond stage ofDefects on . Grade K-3U.S.Energy - LEDs

205

Reducing LED Costs Through Innovation | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartmentEnergy DataRemediated |Reducing LED Costs Through Innovation

206

LED Luminaire Lifetime: Recommendations for Testing and Reporting  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietipDepartmentJuneWhen IAjani Stewartand Usage ofJ.All of theseLED

207

LEDS Capacity Building and Training Inventory | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place:Keystone Clean Air JumpMaine.LEAF Gender MainstreamingLEDS

208

Critical Materials Workshop Final Participant List  

Broader source: Energy.gov [DOE]

List of participants who attended the Critical Materials Workshop held on April 3, 2012 in Arlington, VA

209

DOE Hydrogen Transition Analysis Workshop: Final Attendees List...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Attendees List DOE Hydrogen Transition Analysis Workshop: Final Attendees List Attendee list for the DOE Hydrogen Transition Analysis Workshop on January 26, 2006....

210

Updated January 2013 List of Faculty Advisors  

E-Print Network [OSTI]

Updated January 2013 List of Faculty Advisors Note: While this list will change over time, you may keep the advisor originally assigned to you unless that advisor is not here (on leave or retired or has of the faculty advisors listed here or Rocio Avila, please refer to the CS Department Advising Flowchart at www

Eirinaki, Magdalini

211

Updated June 2014 List of Faculty Advisors  

E-Print Network [OSTI]

Updated June 2014 List of Faculty Advisors Note: While this list will change over time, you may keep the advisor originally assigned to you unless that advisor is not here (on leave or retired or has of the faculty advisors listed here or COSAC, please refer to the CS Department Advising Flowchart at www.cs.sjsu

Su, Xiao

212

Updated August 2013 List of Faculty Advisors  

E-Print Network [OSTI]

Updated August 2013 List of Faculty Advisors Note: While this list will change over time, you may keep the advisor originally assigned to you unless that advisor is not here (on leave be seeing one of the faculty advisors listed here or Rocio Avila, please refer to the CS Department

Su, Xiao

213

COMPUTER SECURITY revision list Subject Notes  

E-Print Network [OSTI]

COMPUTER SECURITY revision list Subject Notes AES DES 3-DES CBC Diffie-Hellman Elgaml RSA KeyCrypt Electronic Signatures PGP Access Control Matrix Access Control Lists #12;COMPUTER SECURITY revision list for Linux Confused Deputy Problem MD5 SHA1 SHA2 / SHA256 / SHA512 SHA3 Collision attacks MAC Password

Chothia, Tom

214

Linking of Serially Ordered Lists by Macaque Monkeys (Macaca mulatta): List Position Influences  

E-Print Network [OSTI]

list positions from initial learning, but continued testing with directional reward yielded gradualLinking of Serially Ordered Lists by Macaque Monkeys (Macaca mulatta): List Position Influences F or not in a counterbalanced, within-subject design. Linking entailed training on the 2 pairs that ordered the 3 5-item lists

Raghanti, Mary Ann

215

2009 Voluntary Protection Programs Participants' Association (VPPPA) Presentaton: Employee Led Safety Committees  

Broader source: Energy.gov [DOE]

2009 Voluntary Protection Programs Participants' Association (VPPPA) Presentaton: Employee Led Safety Committees

216

Oppenheimer&Groves : The duality that led to Trinity /.  

SciTech Connect (OSTI)

The alliance of J. Robert Oppenheimer, scientist, and Leslie R. Groves, military leader, is often interpreted as the classic example of the clash between the academic mind and the military style. Evidence suggests, instead, that it was a collaboration that led to the dawn of the nuclear age. Instead of a clash, it was collaboration and an implosion of the diverse talents needed for the success of this project. Discussion of these flawed and fascinating individuals still ignites controversy today. This presentation will explore the backgrounds and personalities of these two men and their work together to accomplish their mission. Was the aftermath inevitable, given a relationship based on respect, but perhaps not trust? The genesis of the modern military-industrial complex rested on the genius of these two men, though they personify two distinct American sub-cultures. What lessons can be drawn from their wartime and post-war relationship? What analogies can be drawn for current American values?

Connaughton, T. G. (Theresa G.); Smith, S. E. (Sharon E.)

2001-01-01T23:59:59.000Z

217

I/O Library List  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickr FlickrGuidedCH2MLLCBasics HydropowerI/O Library List I/O Library

218

Chapter 6 List of Preparers  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTieCelebrate Earth Day with SecretaryDerivedof&6. LIST OF PREPARERS

219

Listing of Defense Nuclear Facilities  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe10IO1OP001 LetterLight-Duty11.2.13 LiquidEnergySME35Listing

220

OSHA List of Hazardous Chemicals  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the ContributionsArms ControlChris Samoray CommunicationsOperationsOSCARSOSHA List of

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Registration List - WCI-III  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298,NIST3 AÇORIANONews Media »WCI-III Registration List

222

Listing | netl.doe.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region serviceMission StatementCenterTri-Party Agreement > List

223

Lists of NERSC Awarded Projects  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformationPostdocsCenterCentera A B C D E F G H I J KList List

224

Vehicle Traffic Control Signal Heads— Light Emitting Diode Circular Signal Supplement (VTCSH-LED). This replaced the so-called Interim LED Purchase Specifications,  

E-Print Network [OSTI]

Engineers ’ (ITE) specification for light-emitting diode (LED) circular traffic signals recently was updated (June 27, 2005) and published under the name

S. Behura

225

EECBG Success Story: St. Paul Parking Ramp Serves as a Model...  

Energy Savers [EERE]

St. Paul Parking Ramp Serves as a Model for Sustainability EECBG Success Story: St. Paul Parking Ramp Serves as a Model for Sustainability April 17, 2014 - 2:10pm Addthis Upgrades...

226

Energy performance listings: Residential refrigerator/freezers  

SciTech Connect (OSTI)

The Energy Performance Listings series provides comparative information across manufacturers on products. The Refrigerator/Freezers Listings include more than 2900 models that meet or exceed federal standards contained in the Energy Conservation Program for Consumer Products. Information on model energy efficiency levels, performance characteristics, and manufacturer names permits easy selection of top-performing equipment. Each Energy Performance Listing includes an introductory section, two sections of model listings, and an appendix with manufacturer contacts. The first model-listing section presents information in descending order of efficiency for all manufacturers. These efficiency-ordered listings also include banners or symbols to identify voluntary efficiency thresholds for U.S. DOE/U.S. EPA`s Energy Star Program and U.S. DOE`s Federal Energy Management Program (FEMP). Products listed above each banner meet or exceed the efficiency level established by the Energy Star program. All models noted with the symbol meet or exceed FEMP levels. With these listings, users can quickly identify the most efficient product in a particular size range, identify products that meet the efficiency criteria of a specific program, or determine an efficiency threshold that will include a specific number of manufacturers. The second section of model listings presents products grouped by manufacturer and catalog number, allowing users to quickly find and identify performance information on specific models. Energy Performance Listings are tools that support purchasing and procurement by federal, state, and local governments and others, including utility companies, energy interest groups, and research organizations. The listings may be used for program design and planning purposes, equipment selection, specification, and purchasing decisions. The listings are a product of the Energy-Efficient Procurement Collaborative, Inc. and are available through NYSERDA.

NONE

1997-01-01T23:59:59.000Z

227

Mozzarella Cheese Sticks served with ranch dressing & marinara $4 Potato Croquettes  

E-Print Network [OSTI]

Mozzarella Cheese Sticks­ served with ranch dressing & marinara $4 Potato Croquettes $4 S T A R T E

Glasser, Adrian

228

PowerSaver Approved Lenders List  

Broader source: Energy.gov [DOE]

This document describes the 2014 approved PowerSaver lender list with contact information for the various states across the United States.

229

Created to Serve: Colorado State University's Impact on the State's Economy  

E-Print Network [OSTI]

Created to Serve: Colorado State University's Impact on the State's Economy #12;2 Created to Serve: Created to Serve: Colorado State University's Impact on the State's Economy All data, research's Impact on the State's Economy Message from the President Colorado State, as a land-grant university

Rutledge, Steven

230

An Investigation into the Perception of Color under LED White Composite Spectra with Modulated Color Rendering  

E-Print Network [OSTI]

emitting diodes, LEDs. We examined seven LED white composite spectra with different color rendering of a pilot study that evaluates the perceptual impact of modulation of color rendering using multi-chip light

O'Reilly, Una-May

231

DOE Publishes Technical Brief Clarifying Misconceptions about Safety of LED Lighting  

Broader source: Energy.gov [DOE]

The spectral emission of LEDs is a frequent subject of concern, so to set the record straight, the U.S. Department of Energy has published a technical brief entitled True Colors: LEDs and the...

232

Fabrication of InGaP LEDs on a graded buffer substrate  

E-Print Network [OSTI]

Introduction: Computer display panels create a vast color palette by combining color from three light emitting diodes (LEDs), each producing red, green, or blue light. The light from these three LEDs is chosen so that the ...

Martínez, Josué F

2007-01-01T23:59:59.000Z

233

Have You Used LED Lighting? Tell Us About It. | Department of...  

Broader source: Energy.gov (indexed) [DOE]

It. May 7, 2009 - 5:00am Addthis This week, John shared his experiences with light-emitting diode (LED) lighting. In a future blog, he'll share more about LED lighting. Have you...

234

Text-Alternative Version: Model Specification for LED Roadway Luminaires Webcast  

Broader source: Energy.gov [DOE]

Below is the text-alternative version of the "Model Specification for LED Roadway Luminaires" webcast, held November 15, 2011.

235

E-Print Network 3.0 - af led lyskilder Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Birgitte Thestrup... Roskilde, Denmark Abstract Research and development within Light Emitting Diode or LED Source: Ris National Laboratory Collection: Multidisciplinary...

236

Text-Alternative Version: Successful Selection of LED Streetlight Luminaires Webcast  

Broader source: Energy.gov [DOE]

Below is the text-alternative version of the "Successful Selection of LED Streetlight Luminaires" webcast, held March 6, 2013.

237

TESLA-FEL 2007-03 Application of low cost GaAs LED as neutron  

E-Print Network [OSTI]

neutrons in unbiased Gallium Arsenide (GaAs) Light Emitting Diodes (LED) resulted in a reduction Keywords: COTS components, Displacement damage, Electron Linear Accelerator, GaAs Light emitting diode (LED) Gallium Arsenide (GaAs) light emitting diode (LED) for the assessment of integrated neutron fluence

238

FALL 2011 DEAN'S LIST A Nicole Butler  

E-Print Network [OSTI]

Duvall #12;FALL 2011 DEAN'S LIST E H John Eickhoff Michael Haas Nicole Eley Christopher Hall Kierstin Fountain Jordan Holland April Fox Timothy Holmer Jessica Frey Wilson Holoweski Samuel Horning G Shannon Guerrero Ian Gulland #12;FALL 2011 DEAN'S LIST K Lejdi Malo Keri Kahn Heather Marks John Kalogerakos

Berdichevsky, Victor

239

Qualified List of Energy Service Companies  

Broader source: Energy.gov [DOE]

The Federal Energy Management Program (FEMP) established the U.S. Department of Energy (DOE) Qualified List of Energy Service Companies (ESCOs) in accordance with the Energy Policy Act of 1992 and 10 CFR 436. The DOE Qualified List of ESCOs is composed of private industry firms that have submitted an application and been qualified by a qualification review board comprised of DOE staff.

240

Single proteins that serve linked functions in intracellular and extracellular microenvironments  

E-Print Network [OSTI]

listed above, these proteins lack exocytosis-targetingthe cell. These proteins often lack defined secretory signalthe lack of an exocytosis signal sequence in proteins with

Radisky, Derek C.

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Technology Forum Map and List of Awardees' Posters and Exhibits...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Technology Forum Map and List of Awardees' Posters and Exhibits Technology Forum Map and List of Awardees' Posters and Exhibits Technology Forum map and list of exhibits.pdf More...

242

High Schools Served by Regional Admissions Representatives (by County) Lisa Overstreet  

E-Print Network [OSTI]

High Schools Served by Regional Admissions Representatives (by County) Region 1 Lisa Overstreet San Joaquin El Dorado San Mateo Fresno Sierra Kings Solano Lake Sonoma Madera Stanislaus Mariposa

Belanger, David P.

243

Reduced Gravity Education Flight Opportunity for Students at Minority Serving Institutions  

Broader source: Energy.gov [DOE]

NASA is offering undergraduate students from Minority Serving Institutions an opportunity to test experiments in microgravity aboard NASA's reduced gravity aircraft.

244

Longest-Serving Active Paper Mill in the Western United States...  

Broader source: Energy.gov (indexed) [DOE]

MMBtu and 379,000 annually after receiving a DOE energy assessment and implementing steam system improvement recommendations. Longest-Serving Active Paper Mill in the Western...

245

Teaming Partner List Available for the Innovative Composites...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Teaming Partner List Available for the Innovative Composites Institute FOA Teaming Partner List Available for the Innovative Composites Institute FOA March 26, 2014 - 12:34pm...

246

List of Topics for Interagency Performance & Risk Assessment...  

Office of Environmental Management (EM)

List of Topics for Interagency Performance & Risk Assessment Community of Practice (P&RA CoP) Discussion List of Topics for Interagency Performance & Risk Assessment Community of...

247

LIST OF JOURNAL PUBLICATIONS Mark Aindow  

E-Print Network [OSTI]

1 LIST OF JOURNAL PUBLICATIONS Mark Aindow 1987 1. Hexagonal Crystallography and Interphase, J Micros Res Tech 23: 98-99 (1992). 10. The Use of Electrochemical Scanning Tunneling Microscopy

Alpay, S. Pamir

248

How to rank the top500 list?  

E-Print Network [OSTI]

HOW TO RANK THE TOP500 LIST? Lin-Wang Wang Computationalone question emerged: how to rank the computers according tothe first 10 computers. Old rank (based on speed) New rank (

Wang, Lin-Wang

2008-01-01T23:59:59.000Z

249

Curriculum Vitae & Publication List Martin Bohner  

E-Print Network [OSTI]

Curriculum Vitae & Publication List Martin Bohner Curators' Professor of Mathematics and Statistics;2 #12;Contents 1 Curriculum Vitae 5 1.1 University Education Citations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 3 #12;4 #12;Chapter 1 Curriculum

Bohner, Martin

250

Systems Analysis Workshop List of Attendees  

Broader source: Energy.gov [DOE]

List of Attendees from DOE Systems Analysis Workshop held in Washington, D.C. July 28-29, 2004 to discuss and define role of systems analysis in DOE Hydrogen Program.

251

DEAN'S LIST HONORABLE MENTION Fall Semester 2010  

E-Print Network [OSTI]

DEAN'S LIST HONORABLE MENTION Fall Semester 2010 Brown, Bryant P. Brown, Dustin H. Campbell Laughlin, Amanda Diane Lemieux, Sydnie Lynn Lesnewski, Michael Phillip Lester, David Ernest Li, Crystal Gan

Wong, Pak Kin

252

Firearms Modifications List- June 13, 2012  

Broader source: Energy.gov [DOE]

This document contains the currently-approved protective force "Firearms Modification List" referred to in Department of Energy Order 473.3, Protection Program Operations. This supersedes any previous versions of this document

253

WhiteOptics' Low-Cost Reflector Composite Boosts LED Fixture Efficiency  

Broader source: Energy.gov [DOE]

With the help of DOE funding, WhiteOptics has developed a composite coating that can be used to improve efficiency in backlit, indirect, and cavity-mixing LED luminaire designs by maximizing light reflection and output. The highly diffuse coating, which is based on a novel high-reflectance particle technology, allows for uniform distribution of light without exaggerating the point-source nature of the LEDs, and is intended to offer an overall system cost-improving solution for LED optics.

254

Philips Lumileds Achieves 139 lm/W in a Neutral White LED  

Broader source: Energy.gov [DOE]

Philips Lumileds' LUXEON Rebel LED can now deliver 139 lm/W in a neutral white LED. The top bin LED, developed with a single InGaN die and phosphor conversion, shows high-performance characteristics up to 139 lm/W and 138 lumens at 350 mA, with a forward voltage of 2.83 V. The CCT of the device is 5385K and the CRI is 70.

255

LED exit signs: Improved technology leads the way to energy savings  

SciTech Connect (OSTI)

Recent innovations in light-emitting diode (LED) exit signs may make LED signs the best choice among the energy efficient options available. In the past, LED signs have offered low power consumption, projected long lamp life, and low maintenance requirements. Now, the best of the LED signs also offer improved optical designs that reduce their already low power consumption while improving visibility and appearance, and even reduce their cost. LED exit signs are gaining market share, and E Source expects this technology to eventually dominate over incandescent, compact fluorescent, and electroluminescent signs. More research is needed, however, to confirm manufacturers` claims of 20-year operating lives for LED signs. Conservative estimates place the number of exit signs in US buildings at about 40 million. Although each sign represents a very small part of a building`s load, exit signs are ready targets for energy efficiency upgrades -- they operate continuously and most use inefficient incandescent sources. With an LED sign, annual energy and maintenance costs can be reduced by more than 90 percent compared to a typical incandescent sign. Low annual costs help to offset the LED sign`s relatively high first cost. More than 25 utilities offer DSM incentives for energy efficient exit signs, and efficient alternatives are becoming more readily available. Recent improvements in optical designs enable many LED signs to visually out perform other sources. In addition to these benefits, LED exit signs have lower life cycle cost than most other options. The biggest barrier to their success, however, is that their first cost has been considerably higher than competing technologies. LED sign prices are falling rapidly, though, because manufacturers are continually improving optical designs of the fixtures to use fewer LEDs and thus even less energy while providing better performance.

Sardinsky, R.; Hawthorne, S.

1994-12-31T23:59:59.000Z

256

BIOL / MARI 4900, 4901, 4902: External Honours Supervisors This is a partial list of people which have served as biology honours thesis supervisors  

E-Print Network [OSTI]

BIOL / MARI 4900, 4901, 4902: External Honours Supervisors This is a partial/Neuroscience Addison, R. B.I.O Afonso, Luis NRC, Marine Biosciences Anderson, Gail Dentistry Anderson, Robert. History,St Mary'

Gunawardena, Arunika

257

A high accuracy computed water line list  

E-Print Network [OSTI]

A computed list of H$_{2}$$^{16}$O infra-red transition frequencies and intensities is presented. The list, BT2, was produced using a discrete variable representation two-step approach for solving the rotation-vibration nuclear motions. It is the most complete water line list in existence, comprising over 500 million transitions (65% more than any other list) and it is also the most accurate (over 90% of all known experimental energy levels are within 0.3 cm$^{-1}$ of the BT2 values). Its accuracy has been confirmed by extensive testing against astronomical and laboratory data. The line list has been used to identify individual water lines in a variety of objects including: comets, sunspots, a brown dwarf and the nova-like object V838 Mon. Comparison of the observed intensities with those generated by BT2 enables physical values to be derived for these objects. The line list can also be used to provide an opacity for models of the atmospheres of M-dwarf stars and assign previously unknown water lines in laboratory spectra.

R. J. Barber; J. Tennyson; G. J. Harris; R. N. Tolchenov

2006-01-11T23:59:59.000Z

258

2015 DOE SSL R&D Workshop LED Topic Table Questions to Consider  

Broader source: Energy.gov [DOE]

This document was distributed during the LED Topic Table portion of the DOE SSL R&D Workshop and aimed to prompt discussion on the following topics:

259

Text-Alternative Version: MSSLC Member Case Studies- LED Street Lighting Programs Webinar  

Broader source: Energy.gov [DOE]

Below is the text-alternative version of the "MSSLC Member Case Studies - LED Street Lighting Programs" webcast, held May 8, 2013.

260

Text Alternative Version: Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products  

Broader source: Energy.gov [DOE]

Below is the text-alternative version of the "Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products" webcast, held March 28, 2013.

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Observed Minimum Illuminance Threshold for Night Market Vendors in Kenya who use LED Lamps  

E-Print Network [OSTI]

business use by night market vendors and shopkeepers. OurThreshold for Night Market Vendors in Kenya who use LEDthreshold for night market vendors who use LED lighting

Johnstone, Peter

2009-01-01T23:59:59.000Z

262

LED Linear Lamps and Troffer Lighting: CALiPER Report Series 21  

ScienceCinema (OSTI)

Video about CALiPER Report Series 21 on LED Linear Lamps and Troffer Lighting, featuring interviews with Tracy Beeson and Naomi Miller of Pacific Northwest National Laboratory.

Beeson, Tracy; Miller, Naomi

2014-06-23T23:59:59.000Z

263

LED Linear Lamps and Troffer Lighting: CALiPER Report Series 21  

SciTech Connect (OSTI)

Video about CALiPER Report Series 21 on LED Linear Lamps and Troffer Lighting, featuring interviews with Tracy Beeson and Naomi Miller of Pacific Northwest National Laboratory.

Beeson, Tracy; Miller, Naomi

2014-06-17T23:59:59.000Z

264

Text-Alternative Version: LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR®  

Broader source: Energy.gov [DOE]

Below is the text-alternative version of the LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR® webcast.

265

Text-Alternative Version: CALiPER Series 21 on LED Linear Lamps and Troffer Lighting  

Broader source: Energy.gov [DOE]

Following is a text version of a video about CALiPER Application Report Series 21 on LED Linear Lamps and Troffer Lighting.

266

Researchers Say They've Solved the Mystery of LED Lighting "Droop...  

Broader source: Energy.gov (indexed) [DOE]

Sciences Team. Despite being cool, ultra-efficient and long lasting, the light-emitting diode (LED) faces a problem called "efficiency droop." New findings from simulations...

267

DOE Publishes GATEWAY Report on High-Luminous-Flux LED Lighting...  

Office of Environmental Management (EM)

LED technology performs well in a region with high ambient temperature and solar radiation, it can perform well in most outdoor environments. The full report and a report...

268

SSL splitting: securely serving data from untrusted Chris Lesniewski-Laas and M. Frans Kaashoek  

E-Print Network [OSTI]

SSL splitting: securely serving data from untrusted caches Chris Lesniewski-Laas and M. Frans that they proxy. SSL splitting is a new tech- nique for guaranteeing the integrity of data served from proxies without requir- ing changes to Web clients. Instead of relaying an insecure HTTP connection, an SSL

Gummadi, Ramakrishna

269

SSL splitting: securely serving data from untrusted caches Chris Lesniewski-Laas and M. Frans Kaashoek  

E-Print Network [OSTI]

SSL splitting: securely serving data from untrusted caches Chris Lesniewski-Laas and M. Frans that they proxy. SSL splitting is a new technique for guaranteeing the integrity of data served from proxies without requiring changes to Web clients. Instead of relaying an insecure HTTP connec- tion, an SSL

Gummadi, Ramakrishna

270

Rice Hall serves collaborative researchers throughout the Engineering School and across  

E-Print Network [OSTI]

Rice Hall serves collaborative researchers throughout the Engineering School and across Grounds promotes new curricula and facilitate research areas such as distance learning, energy conservation and distributed multimedia. Rice Hall serves as a "living lab" where faculty and students can measure and improve

Acton, Scott

271

The evolving price of household LED lamps: Recent trends and historical comparisons for the US market  

SciTech Connect (OSTI)

In recent years, household LED light bulbs (LED A lamps) have undergone a dramatic price decline. Since late 2011, we have been collecting data, on a weekly basis, for retail offerings of LED A lamps on the Internet. The resulting data set allows us to track the recent price decline in detail. LED A lamp prices declined roughly exponentially with time in 2011-2014, with decline rates of 28percent to 44percent per year depending on lumen output, and with higher-lumen lamps exhibiting more rapid price declines. By combining the Internet price data with publicly available lamp shipments indices for the US market, it is also possible to correlate LED A lamp prices against cumulative production, yielding an experience curve for LED A lamps. In 2012-2013, LED A lamp prices declined by 20-25percent for each doubling in cumulative shipments. Similar analysis of historical data for other lighting technologies reveals that LED prices have fallen significantly more rapidly with cumulative production than did their technological predecessors, which exhibited a historical decline of 14-15percent per doubling of production.

Gerke, Brian F.; Ngo, Allison T.; Alstone, Andrea L.; Fisseha, Kibret S.

2014-10-14T23:59:59.000Z

272

Department of Mechanical Engineering Spring 2013 Lumax Lighting 2: LED Industrial High Bay Light Fixture  

E-Print Network [OSTI]

PENNSTATE Department of Mechanical Engineering Spring 2013 Lumax Lighting 2: LED Industrial High Bay Light Fixture Overview The problem that our sponsor, Rich Taylor, presented to the team was to design a light fixture for an industrial setting using high power LED lights. The challenge

Demirel, Melik C.

273

Novel Applications of LEDs for Energy Savings A Systems Level View  

E-Print Network [OSTI]

product (3 production lines @ 24x5) Hg Arc Lamp (300 W/in) 65% of energy in IR UV LED Array (150 WNovel Applications of LEDs for Energy Savings A Systems Level View Santa Barbara Summit on Energy in a Round Lighting Hole? · DC device in an AC Powered World · Cool light source with thermal management

Salama, Khaled

274

A LIGHT READ: A flexible array of LEDs on a folded sheet of paper.  

E-Print Network [OSTI]

electrically conductive polymers and deposited on bendable plastic substrates. Conventional, inorganic LEDs and inorganic LEDs by harnessing the light of conventional electronics in an elastic system with biomedical potential. "The applications we're interested in mostly include interfaces with the human body," says John

Rogers, John A.

275

Cree's High-Power White LED Delivers 121 lm/W  

Broader source: Energy.gov [DOE]

Cree's commercial high-power white LEDs can now deliver 121 lm/W at 35A/cm2 current density. These particular Cree XLamp® XP-G LEDs deliver 267 lumens at a drive current of 700 mA and an operating...

276

Proposal -Interactive City Lighting LED based lighting systems have enabled radically new  

E-Print Network [OSTI]

Proposal - Interactive City Lighting Abstract LED based lighting systems have also be integrated with sensors and smart environments. This has opened up a new world. The use of the LED as a potential means for providing interactive city lighting for social

277

Largest-area Photonic Crystal LED Fabricated Demonstrates Uniform Light Emission  

Broader source: Energy.gov [DOE]

Lumileds Lighting, the University of New Mexico, and Sandia National Laboratories teamed to demonstrate uniform light emission from the largest-area III-Nitride photonic crystal LED (1 x 1 mm2) ever fabricated. Most previous photonic crystal LED research has relied on small-area patterns written by slow, serial-writing electron-beam lithography.

278

TRUE COLORS: LEDS AND THE RELATIONSHIP BETWEEN CCT, CRI, OPTICAL SAFETY, MATERIAL DEGRADATION, AND PHOTOBIOLOGICAL STIMULATION  

SciTech Connect (OSTI)

This document analyzes the optical, material, and photobiological hazards of LED light sources compared to conventional light sources. It documents that LEDs generally produce the same amount of blue light, which is the primary contributor to the risks, as other sources at the same CCT. Duv may have some effect on the amount of blue light, but CRI does not.

Royer, Michael P.

2014-08-30T23:59:59.000Z

279

UNIX Tutorial One 1.1 Listing files and directories  

E-Print Network [OSTI]

UNIX Tutorial One 1.1 Listing files and directories ls (list) When you first login, your current working directory is your home directory. Your home directory has the same name as your user- name is in your home directory, type % ls (short for list) The lscommand lists the contents of your current

Chen, Chi-Ming

280

An Efficient LED System-in-Module for General Lighting Applications  

SciTech Connect (OSTI)

The objective of the project was to realize an LED-based lighting technology platform for general illumination, starting with LED chips, and integrating the necessary technologies to make compact, user-friendly, high-efficiency, energy-saving sources of controlled white (or variable-colored) light. The project is to build the system around the LEDs, and not to work on the LEDs themselves, in order that working products can be introduced soon after the LEDs reach suitable efficiency for mass-production of high-power light sources for general illumination. Because the light sources are intended for general illumination, color must be accurately maintained, requiring feedback control in the electronics. The project objective has been realized and screw base demonstrators, based on the technology developed in the project, have been built.

None

2008-09-14T23:59:59.000Z

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

2012-2013 SPECIALTY JOB LISTS Computer/Information Technology Job List  

E-Print Network [OSTI]

at 732-932-7330 or kseto@oldqueens.rutgers.edu Responsible for centralized management of mobile phones2012-2013 SPECIALTY JOB LISTS Computer/Information Technology Job List Establishing Eligibility an offer of FWSP funds on your financial aid award letter. Applying for Computer/Information Technology

Delgado, Mauricio

282

CHEMISTRY TUTOR LIST 9/15/14 This is an alphabetical listing by last name.  

E-Print Network [OSTI]

CHEMISTRY TUTOR LIST 9/15/14 This is an alphabetical listing by last name. NOTE: The Chemistry them learn chemistry) enrolled in that course. NAME WILL TUTOR FOR CHM COURSES E-MAIL HOURLY RATE Balow, Bobby all general chemistry rbalow@purdue.edu $20 Chowdhury, Azhad all general chemistry except 11500

Jiang, Wen

283

CHEMISTRY TUTOR LIST 1/10/14 This is an alphabetical listing by last name.  

E-Print Network [OSTI]

CHEMISTRY TUTOR LIST 1/10/14 This is an alphabetical listing by last name. NOTE: The Chemistry them learn chemistry) enrolled in that course. NAME WILL TUTOR FOR CHM COURSES E-MAIL HOURLY RATE Bohn, Kelsey 12901 kbohn@purdue.edu $20, groups negotiable Chowdhury, Azhad all general chemistry except 11600

Jiang, Wen

284

78.1: Ultra Compact Polarization Recycling System for White Light LED based Pico-Projection System  

E-Print Network [OSTI]

78.1: Ultra Compact Polarization Recycling System for White Light LED based Pico-Projection System polarization recycling system, for white light LED based projectors, is proposed. White light LED is applied. In this paper, we propose an ultra compact polarization recycling system for white light LED based projection

285

List of Hydrogen Incentives | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place:KeystoneSolarList of Geothermal Incentives JumprecoveryList

286

List of Siding Incentives | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place:KeystoneSolarList ofPassive SolarRoofs Incentives JumpList

287

Reduction of part-list cuing inhibition  

E-Print Network [OSTI]

. . . . . . . . . . . - . . ~ ~ . ~ 23 Table 3: Total Number Recalled, Reminiscence, and Hypermnesia as a Function of Incubation Interval and List Type in Experiment 2 30 Table 4: Minute-by-Minute Reminiscence as a Function of Incubation Interval and List Type in Experiment 2 33... 2. 55 1. 37 1. 55 10. 47 10. 66 6. 02 0. 19 31 2. 52 3. 05 1. 08 1. 10 10. 77 2. 04 11. 23 2. 02 6. 10 0. 88 0. 47 1. 35 30 Cued Recall Total Test 1 Total retest Reminiscence Hypermnesia 10. 17 12. 42 8. 63 2. 27 30 4. 00 3. 98 1...

Brown, Jeffrey Michael

1991-01-01T23:59:59.000Z

288

Attendee Lists BNL June 4.xlsx  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustionImprovement3--Logistical5/08 Attendance List from 12/05/08 Attendance List from 12/05/08

289

CoServ Electric Cooperative- Commercial Energy Efficient Lighting Rebate Program  

Broader source: Energy.gov [DOE]

CoServ Electric Cooperative provides rebates for commercial and industrial customers who upgrade to high efficiency lighting for the workplace. A rebate of $0.30/watt saved is available on custom...

290

Admission Control and Path Allocation for SLAs in DiffServ Networks  

E-Print Network [OSTI]

han- dling by individual IP routers. In the DiffServ frame- work, a service contract, or Service Level that a cus- tomer should receive. The service contract, though, does not discriminate among packet

Mellia, Marco

291

University Food Permit For Serving Food or Refreshments on University Property  

E-Print Network [OSTI]

University Food Permit For Serving Food or Refreshments on University Property Not Required__________________________________________ Date ___________________ When applicable, this permit must be reviewed by the Environmental Hygiene only) #12;Caterer/Restaurant/ Market ADDITIONAL FOOD SOURCES: University Food Permit (Page 2) Foods

Amin, S. Massoud

292

EM Employee Serves Military in Afghanistan, Manages $5.8 Billion Army Task Order  

Broader source: Energy.gov [DOE]

BAGRAM AIRFIELD, Afghanistan – EM employee James Hawkins is currently serving the U.S. military in Afghanistan, where he is administering a $5.8 billion task order for the Army.

293

Chemical & Engineering News Serving the chemical, life sciences and laboratory worlds  

E-Print Network [OSTI]

Chemical & Engineering News Serving the chemical, life sciences and laboratory worlds Awards Home of Catalysis Science & Technology (Probationary). Chemical & Engineering Or Petroleum Chemistry February 1, 2010 Volume 88, Number 5 p. 42 Sponsored by the George A. Olah Endowment

294

Vapochromic LED  

DOE Patents [OSTI]

A sandwich device was prepared by electrodeposition of an insoluble layer of oligomerized tris(4-(2-thienyl)phenyl)amine onto conducting indium-tin oxide coated glass, spin coating the stacked platinum compound, tetrakis(p-decylphenylisocyano)platinum tetranitroplatinate, from toluene onto the oligomer layer, and then coating the platinum complex with aluminum by vapor deposition. This device showed rectification of current and gave electroluminescence. The electroluminescence spectrum (.lambda..sub.max =545 nm) corresponded to the photoluminescence spectrum of the platinum complex. Exposure of the device to acetone vapor caused the electroemission to shift to 575 nm. Exposure to toluene vapor caused a return to the original spectrum. These results demonstrate a new type of sensor that reports the arrival of organic vapors with an electroluminescent signal. The sensor comprises (a) a first electrode; (b) a hole transport layer formed on the first electrode; (c) a sensing/emitting layer formed on the hole transport layer, the sensing/emitting layer comprising a material that changes color upon exposure to the analyte vapors; (d) an electron conductor layer formed on the sensing layer; and (e) a second electrode formed on the electron conductor layer. The hole transport layer emits light at a shorter wavelength than the sensing/emitting layer and at least the first electrode comprises an optically transparent material.

Kunugi, Yoshihito (Hiroshima, JP); Mann, Kent R. (North Oaks, MN); Miller, Larry L. (Minnetonka, MN); Exstrom, Christopher L. (Kearney, NE)

2003-06-17T23:59:59.000Z

295

Vapochromic LED  

DOE Patents [OSTI]

A sandwich device was prepared by electrodeposition of an insoluble layer of oligomerized tris(4-(2-thienyl)phenyl)amine onto conducting indium-tin oxide coated glass, spin coating the stacked platinum compound, tetrakis(p-decylphenylisocyano)platinum tetranitroplatinate, from toluene onto the oligomer layer, and then coating the platinum complex with aluminum by vapor deposition. This device showed rectification of current and gave electroluminescence. The electroluminescence spectrum (.mu..sub.max =545 nm) corresponded to the photoluminescence spectrum of the platinum complex. Exposure of the device to acetone vapor caused the electroemission to shift to 575 nm. Exposure to toluene vapor caused a return to the original spectrum. These results demonstrate a new type of sensor that reports the arrival of organic vapors with an electroluminescent signal. The sensor comprises (a) a first electrode; (b) a hole transport layer formed on the first electrode; (c) a sensing/emitting layer formed on the hole transport layer, the sensing/emitting layer comprising a material that changes color upon exposure to the analyte vapors; (d) an electron conductor layer formed on the sensing layer; and (e) a second electrode formed on the electron conductor layer. The hole transport layer emits light at a shorter wavelength than the sensing/emitting layer and at least the first electrode comprises an optically transparent material.

Kunugi, Yoshihito (Hiroshima, JP); Mann, Kent R. (North Oaks, MN); Miller, Larry L. (Minnetonka, MN); Exstrom, Christopher L. (Kearney, NE)

2002-01-15T23:59:59.000Z

296

Philips Lumileds Is Exploring the Use of Silicon Substrates to Lower the Cost of LEDs  

Broader source: Energy.gov [DOE]

With the help of DOE funding, Philips Lumileds is exploring the use of nitride epitaxy on 150mm silicon substrates to produce low-cost, warm-white, high-performance general-illumination LEDs. Most LEDs are made with C-plane sapphire substrates, but silicon—at roughly half a penny per square millimeter—is much cheaper, and it's also easier to obtain. Philips Lumileds is attempting to adapt the use of silicon to the manufacture of LEDs, drawing upon the knowledge base and depreciated equipment of the computer industry, which has been using silicon substrates for decades.

297

High Efficiency m-plane LEDs on Low Defect Density Bulk GaN Substrates  

SciTech Connect (OSTI)

Solid-state lighting is a key technology for reduction of energy consumption in the US and worldwide. In principle, by replacing standard incandescent bulbs and other light sources with sources based on light-emitting diodes (LEDs), ultimate energy efficiency can be achieved. The efficiency of LEDs has improved tremendously over the past two decades, however further progress is required for solid- state lighting to reach its full potential. The ability of an LED at converting electricity to light is quantified by its internal quantum efficiency (IQE). The material of choice for visible LEDs is Gallium Nitride (GaN), which is at the basis of blue-emitting LEDs. A key factor limiting the performance of GaN LEDs is the so-called efficiency droop, whereby the IQE of the LED decreases significantly at high current density. Despite decades of research, efficiency droop remains a major issue. Since high-current operation is necessary for practical lighting applications, reducing droop is a major challenge for the scientific community and the LED industry. Our approach to solving the droop issue is the use of newly available low-defect-density bulk GaN non-polar substrates. In contrast to the standard foreign substrates (sapphire, silicon carbide, silicon) used in the industry, we have employed native bulk GaN substrates with very low defect density, thus ensuring exquisite material quality and high IQE. Whereas all commercial LEDs are grown along the c-plane crystal direction of GaN, we have used m-plane non-polar substrates; these drastically modify the physical properties of the LED and enable a reduction of droop. With this approach, we have demonstrated very high IQE performance and low droop. Our results focused on violet and blue LEDs. For these, we have demonstrated very high peak IQEs and current droops of 6% and 10% respectively (up to a high current density of 200A.cm-2). All these results were obtained under electrical operation. These high IQE and low droop values are in line with the program’s milestones. They demonstrate that bulk non-polar GaN substrates represent a disruptive technology for LED performance. Application of this technology to real-world products is feasible, provided that the cost of GaN substrates is compatible with the market’s requirement.

David, Aurelien

2012-10-15T23:59:59.000Z

298

PUBLICATIONS LIST Louisiana Forest Products Development Center  

E-Print Network [OSTI]

to Air-Drying and Kiln-drying from the Green Condition. Gibson, Grozdits #29 Southern Forest ProductsPUBLICATIONS LIST Louisiana Forest Products Development Center School of Renewable Natural Forest Products Development Center RESEARCH BRIEFS #1 An Overview of the Louisiana Secondary Wood

299

List of Publications A. Nuclear Physics  

E-Print Network [OSTI]

List of Publications (2011-) A. Nuclear Physics B. Atomic and Condensed matter Physics C. Interdisciplinary Areas and Applications #12;A. Nuclear Physics 1. Investigation of cluster structure of 9 Be from, Tripathy S P, Lahiri C, Joshi D S, Sarkar P K, Radiat. Prot. Dosimetry 143, 4 (2011) 3. Structural change

Shyamasundar, R.K.

300

ORGANIZATION/ENTITY NAME INFORMATION REQUEST LIST  

E-Print Network [OSTI]

our understanding of your departmental operations and activities. This list is not intended to be all be useful to us in the conduct of this audit. If you or your staff have any questions or need clarification Due Date Date Received Operations 1. Organization/ Operational Departmental organizational chart (s

Cinabro, David

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Speaker List for EE Forum Breakout Sessions  

Office of Energy Efficiency and Renewable Energy (EERE)

The document contains a full itinerary of the EE Forum Breakout Sessions that includes full lists of speakers and their topics. The document covers Session 1 and Session 2. Each session includes the Buildings & Appliances Track, Codes & Standards Track, Industry Track, and Financing & ESCOs Track. Each session includes three separate forums taking place in either the Boiler Room, Crystal Ballroom, or Whitecotton Room.

302

CAFLS Departmental Advisor List (March 2008)  

E-Print Network [OSTI]

CAFLS Departmental Advisor List (March 2008) Dean Dr. Alan Sams 656-7551 asams@clemson.edu 101 Advisor) AGRICULTURAL AND APPLIED ECONOMICS Dr. Charlie Curtis 656-5781 ccurtis@clemson.edu 264 Barre Hall (Lead Advisor) Ms. Lynn Fowler 656-3225 lfwlr@clemson.edu 224 Barre Hall (Lead Administrative Assistant

Bolding, M. Chad

303

DEAN'S LIST HONORABLE MENTION Spring Semester 2014  

E-Print Network [OSTI]

DEAN'S LIST HONORABLE MENTION Spring Semester 2014 Congratulations to these students for earning Joseph Ding, Yawei Dow, Luz M. Dzul Karnain, Ahmad Ariff Eddy, Steven Kyle Edwards, Corey Taylor Ellis Emelien Hailwood, Michael Dean Hall, Peter W. Hatch, Brent Lane Haubert, Ian A. Hernandez, Luis Leonardo

Wong, Pak Kin

304

DEAN'S LIST HONORABLE MENTION Spring Semester 2010  

E-Print Network [OSTI]

DEAN'S LIST HONORABLE MENTION Spring Semester 2010 Brown, Skyler Joseph Budinoff, Hannah D. Buzimkic, Ena Campbell, Jesse Alexander Campbell, Jonathan A. Carlotto, Colleen R. Carvallo, Francisco Cureton, David Wayne Davis, Trent Wilford Davis, Wyatt Joseph DeRosa, Sean Edward Dettmer, Lance D. Dixit

Wong, Pak Kin

305

GENERAL CHEMISTRY TEXTBOOK LIST ISBN Number  

E-Print Network [OSTI]

FALL 2013 GENERAL CHEMISTRY TEXTBOOK LIST Course Number ISBN Number Title of Text and/or Material Edition Author Publishers 11100 978-1-2591-9687-4 Introduction to Chemistry, 3rd ed. (packaged w 978-1-2591-6192-6 Chemistry, The Molecular Nature of Matter and Change, 6e (packaged w

Jiang, Wen

306

OPTIMIZATION TOPICS LIST Revised April 2012  

E-Print Network [OSTI]

1 OPTIMIZATION TOPICS LIST Revised April 2012 For Fall 2012 and Spring 2013 we will adopt. Bertsimas and J. Tsitsiklis, Introduction to Linear Optimization, Athena Scientific, 1997 2. M. C. Ferris, O and mixed integer models · Existence of optimal solutions, optimality conditions · Branch and bound methods

Radeloff, Volker C.

307

Publications List Publication Title ISSN ISBN  

E-Print Network [OSTI]

-7803-4881-8 3-D Digital Imaging and Modeling, 1997. Proceedings., International Conference on 0-8186-7943-3 3-D Digital Imaging and Modeling, 1999. Proceedings. Second International Confer 0-7695-0062-5 3-D ImagingPublications List Publication Title ISSN ISBN 100 Years of Radio, 1995., International Conference

Hoffmann, Rolf

308

Payment list S.No Names Country  

E-Print Network [OSTI]

Payment list S.No Names Country 1 A. Bueck Germany 2 A. Kronenburg Germany 3 Achintya Mukhopadhyay Chennai 4 Christoph Kirse Germany 5 Heiko Briesen Germany 6 Jitendra Kumar Germany 7 Mahesh V . Panchagnula Chennai 8 Marchisio, D. L. Italy 9 Markus Kraft UK 10 Martin. A. J. Hartig Germany 11 Menwer M

Srinivasan, N.

309

Applied Materials Develops an Advanced Epitaxial Growth System to Bring Down LED Costs  

Broader source: Energy.gov [DOE]

With the help of DOE funding, Applied Materials has developed an advanced epitaxial growth system for gallium nitride (GaN) LED devices that decreases operating costs, increases internal quantum efficiency, and improves binning yields.

310

LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR®  

Broader source: Energy.gov [DOE]

This May 19, 2009 webcast summarized CALiPER's recent benchmark testing of common omnidirectional incandescent lamps (e.g., A-lamps), and provided an update on ENERGY STAR criteria for LED integral...

311

LED Linear Lamps and Troffer Lighting: CALiPER Report Series 21  

Broader source: Energy.gov [DOE]

View the video about CALiPER Report Series 21 on LED Linear Lamps and Troffer Lighting, featuring interviews with Tracy Beeson and Naomi Miller of Pacific Northwest National Laboratory.

312

Digital Architecture for Driving Large LED Arrays with Dynamic Bus Voltage Regulation and Phase Shifted PWM  

E-Print Network [OSTI]

Emitting Diodes (HB-LEDs) with improved system efficiency and reduced EMI. Key advantages are achieved - This paper introduces a digital architecture suitable for driving a large number of High Brightness Light

313

Text-Alternative Version: LED Lighting in a Performing Arts Building Webinar  

Broader source: Energy.gov [DOE]

 Welcome ladies and gentlemen. I'm Bob Davis with the Pacific Northwest National Laboratory, and I'd like to welcome you to today's webcast titled, LEDs, Can They Perform in a Performing Arts...

314

Member Case Studies: LED Street Lighting Programs in Algona (IA), Asheville (NC), and Boston (MA)  

Broader source: Energy.gov [DOE]

This May 8, 2013 webcast featured presentations from DOE Municipal Solid-State Street Lighting Consortium member cities about their experiences with LED street lighting. Presenters John Bilsten of...

315

Dimming LEDs with Phase-Cut Dimmers: The Specifier's Process for Maximizing Success  

SciTech Connect (OSTI)

This report reviews how phase-cut dimmers work, how LEDs differ from the incandescent lamps that the dimmers were historically designed to control, and how these differences can lead to complications when trying to dim LEDs. Compatibility between a specific LED source and a specific phase-cut dimmer is often unknown and difficult to assess, and ensuring compatibility adds complexity to the design, specification, bidding, and construction observation phases for new buildings and major remodel projects. To maximize project success, this report provides both general guidance and step-by-step procedures for designing phase-controlled LED dimming on both new and existing projects, as well as real-world examples of how to use those procedures.

Miller, Naomi J.; Poplawski, Michael E.

2013-10-01T23:59:59.000Z

316

Slutrapport for PSO 337-068 Udvikling af LED lyskilder og lamper  

E-Print Network [OSTI]

and RGB Lamps. The objective of this project was to pave the way for replacement of incandescent LED light source with an efficacy of 51 lm/W and a CRI index of 92 that can replace an incandescent

317

function of temperature. Similar studies (with neutrons) on uranium led to the dis-  

E-Print Network [OSTI]

1059 function of temperature. Similar studies (with neutrons) on uranium led to the dis- covery to the North Pole and that there was northward mo- tion of the Pacific plate. Conversely, if all seamounts had

Steinberger, Bernhard

318

Successful Selection of LED Streetlight Luminaires: Optimizing Illumination and Economic Performance  

Broader source: Energy.gov [DOE]

This March 6, 2013 webcast reviewed the factors involved in successful selection of LED streetlight luminaires. Presenters Eric Haugaard of Cree Lighting and Chad Stalker of Philips Lumileds guided...

319

Text-Alternative Version: CALiPER Report Series 20 on LED PAR38 Lamps  

Broader source: Energy.gov [DOE]

Michael Royer, Lighting Engineer, Pacific Northwest National Laboratory: The CALiPER program looks at typical LED lamp performance attributes. As we've gone through the progression of reports, we...

320

Transcranial LED therapy for cognitive dysfunction in chronic, mild traumatic brain injury: Two case reports  

E-Print Network [OSTI]

Two chronic, traumatic brain injury (TBI) cases are presented, where cognitive function improved following treatment with transcranial light emitting diodes (LEDs). At age 59, P1 had closed-head injury from a motor vehicle ...

Hamblin, Michael R.

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Deposition of colloidal quantum dots by microcontact printing for LED display technology  

E-Print Network [OSTI]

This thesis demonstrates a new deposition method of colloidal quantum dots within a quantum dot organic light-emitting diode (QD-LED). A monolayer of quantum dots is microcontact printed as small as 20 ,Lm lines as well ...

Kim, LeeAnn

2006-01-01T23:59:59.000Z

322

EECBG Success Story: Shining Energy-Saving LEDs on Utah Starry...  

Energy Savers [EERE]

Energy-Saving LEDs on Utah Starry Nights June 11, 2010 - 4:27pm Addthis Thanks to an Energy Efficiency and Conservation Block Grant (EECBG), Utah is replacing streetlights...

323

Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products  

Broader source: Energy.gov [DOE]

This March 28, 2013 webcast reviewed DOE's recently completed three-part study of the life-cycle energy and environmental impacts of LED lighting products relative to incandescent and CFL...

324

Psychophysical evaluations of modulated color rendering for energy performance of LED-based architectural lighting  

E-Print Network [OSTI]

This thesis is focused on the visual perception evaluation of colors within an environment of a highly automated lighting control strategy. Digitally controlled lighting systems equipped with light emitting diodes, LEDs, ...

Thompson, Maria do Rosário

2007-01-01T23:59:59.000Z

325

Veeco Develops a Tool to Reduce Epitaxy Costs and Increase LED Brightness  

Broader source: Energy.gov [DOE]

With the help of DOE funding, Veeco is working on reducing epitaxy costs and increasing LED efficiency by developing a physical vapor deposition (PVD) tool for depositing aluminum nitride buffer layers on LED substrates. PVD, also known as "sputtering," is an alternative to metal-organic chemical vapor deposition (MOCVD). PVD is a purely physical process that involves plasma sputter bombardment rather than a chemical reaction at the surface to be coated, as in MOCVD.

326

CALiPER Report 21.3: Cost-Effectiveness of Linear (T8) LED Lamps  

SciTech Connect (OSTI)

Meeting performance expectations is important for driving adoption of linear LED lamps, but cost-effectiveness may be an overriding factor in many cases. Linear LED lamps cost more initially than fluorescent lamps, but energy and maintenance savings may mean that the life-cycle cost is lower. This report details a series of life-cycle cost simulations that compared a two-lamp troffer using LED lamps (38 W total power draw) or fluorescent lamps (51 W total power draw) over a 10-year study period. Variables included LED system cost ($40, $80, or $120), annual operating hours (2,000 hours or 4,000 hours), LED installation time (15 minutes or 30 minutes), and melded electricity rate ($0.06/kWh, $0.12/kWh, $0.18/kWh, or $0.24/kWh). A full factorial of simulations allows users to interpolate between these values to aid in making rough estimates of economic feasibility for their own projects. In general, while their initial cost premium remains high, linear LED lamps are more likely to be cost-effective when electric utility rates are higher than average and hours of operation are long, and if their installation time is shorter.

Miller, Naomi J.; Perrin, Tess E.; Royer, Michael P.

2014-05-27T23:59:59.000Z

327

ORIGINAL PAPER Impacts of species-led conservation on ecosystem services  

E-Print Network [OSTI]

Biodiversity conservation organisations have recently begun to consider a wider ecosystem services context targeted biodiversity conservation initiatives have been successful at con- serving species and habitats) demonstrates that biodiversity conservation often loses out to other interests (Wilcove et al. 1998

Vermont, University of

328

Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER  

E-Print Network [OSTI]

Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER Subject Description Monday AND INSURANCE 242 ACTUARIAL SCIENCE 243 TRANSPORTATION AND PUBLIC UTILITIES 244 CLASSICS 250 COMMUNICATION ARTS Reporting #12;Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER Subject Description Monday

Wisconsin at Madison, University of

329

Biomarkers Core Lab Price List Does NOT Include  

E-Print Network [OSTI]

v3102014 Biomarkers Core Lab Price List Does NOT Include Kit Cost PURCHASED by INVESTIGATOR/1/2013 Page 1 of 5 #12;Biomarkers Core Lab Price List Does NOT Include Kit Cost PURCHASED by INVESTIGATOR

Grishok, Alla

330

Building Surface Science Capacity to Serve the Automobile Industry in Southeastern Michigan, final report  

SciTech Connect (OSTI)

This project, “Building Surface Science Capacity to Serve the Automobile Industry in Southeastern Michigan” was carried out in two phases: (1) the 2009 – 2012 renovation of space in the new EMU Science Complex, which included the Surface Science Laboratory (SSL), a very vigorous research lab at EMU that carries on a variety of research projects to serve the auto and other industries in Michigan; and (2) the 2013 purchase of several pieces of equipment to further enhance the research capability of the SSL. The funding granted by the DoE was proposed to “renovate the space in the Science Complex to include SSL and purchase equipment for tribological and electrochemical impedance measurements in the lab, thus SSL will serve the auto and other industries in Michigan better.” We believe we have fully accomplished the mission.

Shen, Weidian

2013-09-27T23:59:59.000Z

331

Photovoltaic energy: Contract list, fiscal year 1990  

SciTech Connect (OSTI)

The federal government has conducted the National Photovoltaics Program since 1975. Its purpose is to provide focus, direction, and funding for the development of terrestrial photovoltaic technology as an energy option for the United States. In the past, a summary was prepared each year to provide an overview of the government-funded activities within the National Photovoltaics Program. Tasks conducted in-house by participating national laboratories or under contract by industrial, academic, and other research institutes were highlighted. This year's document is more concise than the summaries of previous years. The FY 1990 contract overview comprises a list of all subcontracts begun, ongoing, or completed by Sandia National Laboratory or the Solar Energy Research Institute during FY 1990 (October 1, 1989, through September 30, 1990). Under each managing laboratory, projects are listed alphabetically by project area and then by subcontractor name.

Not Available

1991-07-01T23:59:59.000Z

332

Chemical Emissions of Residential Materials and Products: Review of Available Information How well do home energy audits serve  

E-Print Network [OSTI]

University Richard Diamond, Lawrence Berkeley National Laboratory ABSTRACT Home energy audits administered How well do home energy audits serve the homeowner Energy Audits Serve the Homeowner? Aaron Ingle, Mithra Moezzi, and Loren Lutzenhiser, Portland State

333

List of Wind Incentives | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Powerstories on climateJuno Beach,October,Lighthouse SolarList of Wind

334

Project W-320, 241-C-106 sluicing master calculation list  

SciTech Connect (OSTI)

This supporting document has been prepared to make the Master Calculation List readily retrievable. The list gives the status of the calculation (as-built, not used, applied, etc.), the calculation title, its originator, comments, and report number under which it was issued. Tank 241-C-106 has been included on the High Heat Load Watch List.

Bailey, J.W.

1998-08-07T23:59:59.000Z

335

Inventory List Item Number Brief Description Price Preferred Vendor  

E-Print Network [OSTI]

Inventory List UT Austin Item Number Brief Description Price Preferred Vendor L0146 Adapter, Glass w/Screw Top, Amber, 4 dram $0.56 VWRSC 4/21/14 Page - 1 #12;Inventory List UT Austin Item Number;Inventory List UT Austin Item Number Brief Description Price Preferred Vendor S0027 CD, Recordable $0

336

OGJ300; Smaller list, bigger financial totals  

SciTech Connect (OSTI)

This paper reports on Oil and Gas Journal's list of the largest, publicly traded oil and gas producing companies in the U.S. which is both smaller and larger this year than it was in 1990. It's smaller because it covers fewer companies. Industry consolidation has slashed the number of public companies. As a result, the former OGJ400 has become the OGJ300, which includes the 30 largest limited partnerships. But the assets-ranked list is larger because important financial totals - representing 1990 results - are significantly higher than those of a year ago, despite the lower number of companies. Consolidation of the U.S. producing industry gained momentum throughout the 1980s. Unable to sustain profitability in a period of sluggish energy prices and, for many, rising costs, companies sought relief through mergers or liquidation of producing properties. As this year's list shows, however, surviving companies have managed to grow. Assets for the OGJ300 group totaled $499.3 billion in 1990 - up 6.3% from the 1989 total of last year's OGJ400. Stockholders' equity moved up 5.3% to $170.7 billion. Stockholders' equity was as high as $233.8 billion in 1983.

Beck, R.J.; Biggs, J.B.

1991-09-30T23:59:59.000Z

337

Demonstration Assessment of Light-Emitting Diode (LED) Parking Lot Lighting in Leavenworth, KS  

SciTech Connect (OSTI)

This report describes the process and results of a demonstration of solid-state lighting (SSL) technology in a commercial parking lot lighting application, under the U.S. Department of Energy (DOE) Solid-State Lighting Technology GATEWAY Demonstration Program. The parking lot is for customers and employees of a Walmart Supercenter in Leavenworth, Kansas and this installation represents the first use of the LED Parking Lot Performance Specification developed by the DOE’s Commercial Building Energy Alliance. The application is a parking lot covering more than a half million square feet, lighted primarily by light-emitting diodes (LEDs). Metal halide wall packs were installed along the building facade. This site is new construction, so the installed baseline(s) were hypothetical designs. It was acknowledged early on that deviating from Walmart’s typical design would reduce the illuminance on the site. Walmart primarily uses 1000W pulse-start metal halide (PMH) lamps. In order to provide a comparison between both typical design and a design using conventional luminaires providing a lower illuminance, a 400W PMH design was also considered. As mentioned already, the illuminance would be reduced by shifting from the PMH system to the LED system. The Illuminating Engineering Society of North America (IES) provides recommended minimum illuminance values for parking lots. All designs exceeded the recommended illuminance values in IES RP-20, some by a wider margin than others. Energy savings from installing the LED system compared to the different PMH systems varied. Compared to the 1000W PMH system, the LED system would save 63 percent of the energy. However, this corresponds to a 68 percent reduction in illuminance as well. In comparison to the 400W PMH system, the LED system would save 44 percent of the energy and provide similar minimum illuminance values at the time of relamping. The LED system cost more than either of the PMH systems when comparing initial costs. However, when the life-cycle costs from energy and maintenance were factored into the scenario, the LED system had lower costs at the end of a 10-year analysis period. The LED system had a 6.1 year payback compared to the 1000W PMH system and a 7.5 year payback versus the 400W PMH system. The costs reflect high initial cost for the LED luminaire, plus more luminaires and (subsequently) more poles for the LED system. The other major issue affecting cost effectiveness was that Leavenworth, Kansas has very low electricity costs. The melded rate for this site was $0.056 per kWh for electricity. However, if the national electricity rate of $0.1022/kWh was used the payback would change to between four and five years for the LED system. This demonstration met the GATEWAY requirements of saving energy, matching or improving illumination, and being cost effective. The project also demonstrated that the Commercial Building Energy Alliance (CBEA) specification works in practice. Walmart appreciated having an entire site lighted by LEDs to gain more experience with the technology. Walmart is reviewing the results of the demonstration as they consider their entire real estate portfolio.

Myer, Michael; Kinzey, Bruce R.; Curry, Ku'uipo

2011-05-06T23:59:59.000Z

338

Lumen Maintenance and Light Loss Factors: Consequences of Current Design Practices for LED's  

SciTech Connect (OSTI)

Synopsis: Light loss factors are used to help lighting systems meet quantitative design criteria throughout the life of the installation, but they also influence energy use. As the light sources currently being specified continue to evolve, it is necessary to reevaluate the methods used in calculating light loss factors, as well as carefully consider the consequences of different product performance attributes. Because of the unique operating characteristics of LEDs and lack of a comprehensive lifetime rating—as well as the problematic relationship between lifetime and lumen maintenance—determining an appropriate lamp lumen depreciation (LLD) factor for LED products is difficult. As a result, a unique solution has been advocated: when quantity of light is an important design consideration, the IES recommends using an LLD of not greater than 0.70. This method deviates from the typical practice for conventional sources of using the ratio of mean to initial lumen output, and can misrepresent actual performance, increase energy use, and inhibit comparisons between products. This paper discusses the complications related to LLD and LEDs, compares the performance of conventional and LED products, and examines alternatives to a maximum LLD of 0.70 for LEDs.

Royer, Michael P.

2013-09-17T23:59:59.000Z

339

Energy-Efficient, High-Color-Rendering LED Lamps Using Oxyfluoride and Fluoride Phosphors  

SciTech Connect (OSTI)

LED lamps using phosphor downconversion can be designed to replace incandescent or halogen sources with a 'warm-white' correlated color temperature (CCT) of 2700-3200 K and a color rendering index (CRI) greater than 90. However, these lamps have efficacies of {approx}70% of standard 'cool-white' LED packages (CCT = 4500-6000 K; CRI = 75-80). In this report, we describe structural and luminescence properties of fluoride and oxyfluoride phosphors, specifically a (Sr,Ca){sub 3}(Al,Si)O{sub 4}(F,O):Ce{sup 3+} yellow-green phosphor and a K{sub 2}TiF{sub 6}:Mn{sup 4+} red phosphor, that can reduce this gap and therefore meet the spectral and efficiency requirements for high-efficacy LED lighting. LED lamps with a warm-white color temperature (3088 K), high CRI (90), and an efficacy of {approx}82 lm/W are demonstrated using these phosphors. This efficacy is {approx}85% of comparable cool-white lamps using typical Y{sub 3}Al{sub 5}O{sub 12}:Ce{sup 3+}-based phosphors, significantly reducing the efficacy gap between warm-white and cool-white LED lamps that use phosphor downconversion.

Setlur, A.; Radkov, E; Henderson, C; Her, J; Srivastava, A; Karkada, N; Kishore, M; Kumar, N; Aesram, D; et al.

2010-01-01T23:59:59.000Z

340

LEDS Global Partnership in Action: Advancing Climate-Resilient Low Emission Development Around the World (Fact Sheet)  

SciTech Connect (OSTI)

Many countries around the globe are designing and implementing low emission development strategies (LEDS). These LEDS seek to achieve social, economic, and environmental development goals while reducing long-term greenhouse gas (GHG) emissions and increasing resiliency to climate change impacts. The LEDS Global Partnership (LEDS GP) harnesses the collective knowledge and resources of more than 120 countries and international donor and technical organizations to strengthen climate-resilient low emission development efforts around the world.

Not Available

2013-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Lattice-mismatched GaInP LED devices and methods of fabricating same  

DOE Patents [OSTI]

A method (100) of fabricating an LED or the active regions of an LED and an LED (200). The method includes growing, depositing or otherwise providing a bottom cladding layer (208) of a selected semiconductor alloy with an adjusted bandgap provided by intentionally disordering the structure of the cladding layer (208). A first active layer (202) may be grown above the bottom cladding layer (208) wherein the first active layer (202) is fabricated of the same semiconductor alloy, with however, a partially ordered structure. The first active layer (202) will also be fabricated to include a selected n or p type doping. The method further includes growing a second active layer (204) above the first active layer (202) where the second active layer (204) Is fabricated from the same semiconductor alloy.

Mascarenhas, Angelo; Steiner, Myles A; Bhusal, Lekhnath; Zhang, Yong

2014-10-21T23:59:59.000Z

342

Characterization of failure modes in deep UV and deep green LEDs utilizing advanced semiconductor localization techniques.  

SciTech Connect (OSTI)

We present the results of a two-year early career LDRD that focused on defect localization in deep green and deep ultraviolet (UV) light-emitting diodes (LEDs). We describe the laser-based techniques (TIVA/LIVA) used to localize the defects and interpret data acquired. We also describe a defect screening method based on a quick electrical measurement to determine whether defects should be present in the LEDs. We then describe the stress conditions that caused the devices to fail and how the TIVA/LIVA techniques were used to monitor the defect signals as the devices degraded and failed. We also describe the correlation between the initial defects and final degraded or failed state of the devices. Finally we show characterization results of the devices in the failed conditions and present preliminary theories as to why the devices failed for both the InGaN (green) and AlGaN (UV) LEDs.

Tangyunyong, Paiboon; Miller, Mary A.; Cole, Edward Isaac, Jr.

2012-03-01T23:59:59.000Z

343

Development of Advanced Manufacturing Methods for Warm White LEDs for General Lighting  

SciTech Connect (OSTI)

GE Lighting Solutions will develop precise and efficient manufacturing techniques for the “remote phosphor” platform of warm-white LED products. In volume, this will be demonstrated to drive significant materials, labor and capital productivity to achieve a maximum possible 53% reduction in overall cost. In addition, the typical total color variation for these white LEDs in production will be well within the ANSI bins and as low as a 4-step MacAdam ellipse centered on the black body curve. Achievement of both of these objectives will be demonstrated while meeting a performance target of > 75 lm/W for a warm-white LED and a reliability target of <30% lumen drop / <2-step MacAdam ellipse shift, estimated over 50,000 hrs.

Deshpande, Anirudha; Kolodin, Boris; Jacob, Cherian; Chowdhury, Ashfaqul; Kuenzler, Glenn; Sater, Karen; Aesram, Danny; Glaettli, Steven; Gallagher, Brian; Langer, Paul; Setlur, Anant; Beers, Bill

2012-03-31T23:59:59.000Z

344

Low-Cost Substrates for High-Performance Nanorod Array LEDs  

SciTech Connect (OSTI)

The completed project, entitled â??Low-Cost Substrates for High-Performance Nanorod LEDs,â? targeted the goal of a phosphor-free nanorod-based white LED with IQE > 50% across the spectrum from 450 nm to 600 nm on metallized silicon substrates. The principal achievements of this project included: â?¢ Demonstration of (In,Ga)N nanopyramid heterostructures by a conventional OMVPE process. â?¢ Verification of complete filtering of threading dislocations to yield dislocation-free pyramidal heterostructures. â?¢ Demonstration of electroluminescence with a peak wavelength of ~600 nm from an (In,Ga)N nanopyramid array LED. â?¢ Development of a reflective ZrN/AlN buffer layer for epitaxial growth of GaN films and GaN nanopyramid arrays on (111)Si.

Sands, Timothy; Stach, Eric; Garcia, Edwin

2009-04-30T23:59:59.000Z

345

Epitaxial Growth of GaN-based LEDs on Simple Sacrificial Substrates  

SciTech Connect (OSTI)

The objective of this project is to produce alternative substrate technologies for GaN-based LEDs by developing an ALD interlayer of Al{sub 2}O{sub 3} on sacrificial substrates such as ZnO and Si. A sacrificial substrate is used for device growth that can easily be removed using a wet chemical etchant leaving only the thin GaN epi-layer. After substrate removal, the GaN LED chip can then be mounted in several different ways to a metal heat sink/reflector and light extraction techniques can then be applied to the chip and compared for performance. Success in this work will lead to high efficiency LED devices with a simple low cost fabrication method and high product yield as stated by DOE goals for its solid state lighting portfolio.

Ian Ferguson; Chris Summers

2009-12-31T23:59:59.000Z

346

LED-Induced Fluorescence System for Tea Classification and Quality Assessment  

E-Print Network [OSTI]

A fluorescence system is developed by using several light emitting diodes (LEDs) with different wavelengths as excitation light sources. The fluorescence detection head consists of multi LED light sources and a multimode fiber for fluorescence collection, where the LEDs and the corresponding filters can be easily chosen to get appropriate excitation wavelengths for different applications. By analyzing fluorescence spectra with the principal component analysis method, the system is utilized in the classification of four types of green tea beverages and two types of black tea beverages. Qualities of the Xihu Longjing tea leaves of different grades, as well as the corresponding liquid tea samples, are studied to further investigate the ability and application of the system in the evaluation of classification/quality of tea and other foods.

Dong, Yongjiang; Mei, Liang; Feng, Chao; Yan, Chunsheng; He, Sailing

2013-01-01T23:59:59.000Z

347

Integrating Renewable Energy Contracts and Wholesale Dynamic Pricing to Serve Aggregate  

E-Print Network [OSTI]

1 Integrating Renewable Energy Contracts and Wholesale Dynamic Pricing to Serve Aggregate Flexible energy, dynamic programming. I. INTRODUCTION Dynamic pricing has the potential to materialize the poten many of the operational problems that arise from renewable energy integration through dynamic pricing

Oren, Shmuel S.

348

About Hercules Offshore Headquartered in Houston, Texas, Hercules Offshore serves the oil and  

E-Print Network [OSTI]

About Hercules Offshore Headquartered in Houston, Texas, Hercules Offshore serves the oil and gas exploration, drilling and related maintenance tasks. Hercules Offshore operates in key oil producing sites at Hercules Offshore require precision control, global management and careful integration of both on

Fisher, Kathleen

349

Academic Advising Description: Advisors are a resource to serve as guides for navigating  

E-Print Network [OSTI]

Academic Advising Description: Advisors are a resource to serve as guides for navigating academic choices, policies, and requirements. Advisors are excited to meet with students and help them plan and achieve their goals. Academic advisors are well informed about the institution's resources available

Walker, Lawrence R.

350

Gluten-Free Guidelines A BASIC GUIDE TO SERVING GLUTEN-FREE CUSTOMERS  

E-Print Network [OSTI]

Gluten-Free Guidelines A BASIC GUIDE TO SERVING GLUTEN-FREE CUSTOMERS Celiac disease and gluten intolerance are SERIOUS medical conditions. A strict gluten-free diet is REQUIRED to maintain health. Gluten not constitute endorsement. The materials in the Gluten-Free Restaurant Awareness and Gluten-Free Food Service

Hill, Wendell T.

351

Chemical & Engineering News Serving the chemical, life sciences and laboratory worlds  

E-Print Network [OSTI]

fail. Fostering Creativity | Cover Story | Chemical & Engineering News httpChemical & Engineering News Serving the chemical, life sciences and laboratory worlds Cover Story Home » March 22, 2010 Issue » Cover Story » Bubbling With Enthusiasm » Fostering Creativity March 22

Zare, Richard N.

352

BY SHAWN XU, Ph.D. Ground Source Heat Pumps Serve  

E-Print Network [OSTI]

BY SHAWN XU, Ph.D. 1 Ground Source Heat Pumps Serve A Large; BY SHAWN XU, Ph.D. 7 Loop Func>ons § Seasonal storage (Single output) § Hourly buffering (Dual output) #12; BY SHAWN XU, Ph.D. 8 Ground Loops § Ground

353

Serving as a catalyst to promotecollaborativeinterdisciplinary environmental and ecological research through graduate  

E-Print Network [OSTI]

research through graduate education NEED IMPACT STATEMENT INITIATIVE The ESE IGP was launched in fall 2005 environmental research among faculty. IMPACT L10 August 2013 http://www.purdue.edu/discoverypark The EcologicalServing as a catalyst to promotecollaborativeinterdisciplinary environmental and ecological

Ginzel, Matthew

354

Serving the Marshall Space Flight Center Community National Aeronautics and Space Administration  

E-Print Network [OSTI]

Serving the Marshall Space Flight Center Community National Aeronautics and Space Administration July 1, 2010 #12;2 July 1, 2010 Director's Corner This year we're celebrating Marshall's 50th anniversary and the generations of men and women who have made Marshall what it is today. We are stewards

355

Solar energetic particle (SEP) events have been ob-served from Mercury's orbit to beyond Saturn's.  

E-Print Network [OSTI]

the first particle observations in interplanetary space were made, suggested that SEPs are acceler- ated, 1980, 1983). Main feature is the amplification of waves in the upstream medium by particles accelABSTRACT Solar energetic particle (SEP) events have been ob- served from Mercury's orbit to beyond

Steinhoff, Heinz-Jürgen

356

DUAL USE OF LEDS: SIGNALING AND COMMUNICATIONS IN ITS Grantham Pang, Chi-ho Chan, Hugh Liu, Thomas Kwan  

E-Print Network [OSTI]

of light-emitting diodes (LEDs) over incandescent lights is well-supported. This is due to their high shown that the high brightness LEDs are significantly brighter than the incandescent lights lights with LEDs is a reduction in power consumption [7]. In addition, incandescent traffic signals burn

Pang, Grantham

357

Demonstration of LED Retrofit Lamps at the Smithsonian American Art Museum, Washington, DC  

SciTech Connect (OSTI)

This report documents observations and results obtained from a lighting demonstration project conducted under the U.S. Department of Energy GATEWAY Solid-State Lighting (SSL) Technology Demonstration Program at the Smithsonain American Art Museum in Washington, DC. LED Lamp samples were tested in the museum workshop, temporarily installed in a gallery for feedback, and ultimately replaced all traditional incandescent lamps in one gallery of modernist art at the American Art Museum and partially replacing lamps in two galleries at the Musesum's Renwick Gallery. This report describes the selection and testing process, technology challenges, perceptions, economics, energy use, and mixed results of usign LED replacement lamps in art galleries housing national treasures.

Miller, Naomi J.; Rosenfeld, Scott M.

2012-06-22T23:59:59.000Z

358

List of Geothermal Incentives | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place:KeystoneSolarList of Geothermal Incentives Jump to:

359

List of Lighting Incentives | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place:KeystoneSolarList of Geothermal

360

List of Methanol Incentives | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place:KeystoneSolarList of GeothermalMethanol Incentives Jump to:

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

List of Microturbines Incentives | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place:KeystoneSolarList of GeothermalMethanol Incentives Jump

362

List of Motors Incentives | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place:KeystoneSolarList of GeothermalMethanol Incentives383

363

List of Roofs Incentives | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place:KeystoneSolarList ofPassive SolarRoofs Incentives Jump to:

364

List of Vehicles Incentives | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place:KeystoneSolarList ofPassive

365

List of Windows Incentives | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place:KeystoneSolarList ofPassiveMachine ControlsWindows

366

WIPP TRU TeamWorks - Acronym List  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500IIVasudhaSurface.Laboratory inApprovedRegionalDOEIAcronym List

367

List of International Projects for FY 2012  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProvedDecemberInitiatives Initiatives ThroughEnergyNewsLessons from aLifeLisaList

368

Suspect Counterfeit SME List | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from the GridwiseSiteDepartmentChallengeCompliance with OrderSupportSurrondSME List

369

List of Approved Changes - Hanford Site  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region serviceMission StatementCenterTri-Party Agreement > List of

370

Category:Lists | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: EnergyBostonFacilityCascadeJump to:Lists Jump to: navigation, search Category

371

List of Programming Tools at NERSC  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformationPostdocsCenterCentera A B C D E F G H I J KList List of

372

Mercury Releases to Air and Rivers Contaminate Ocean Fish: Dartmouth-Led Effort Publishes Major Findings  

E-Print Network [OSTI]

Mercury Releases to Air and Rivers Contaminate Ocean Fish: Dartmouth-Led Effort Publishes Major and in Sources to Seafood: Mercury Pollution in the Marine Environment-- a companion report by the Dartmouth released into the air and then deposited into oceans, contaminates seafood commonly eaten by people

Myers, Lawrence C.

373

Office of International Programs Education Abroad CSU Faculty-Led Programs Support  

E-Print Network [OSTI]

Office of International Programs ­ Education Abroad 12/2012 CSU Faculty-Led Programs Support Below describes the levels of support and ways that the Office of International Programs ­ Education Abroad unit in the field of international education Application and Maintain website and online application system

374

Philips' LED Luminaires Brighten the Rensselaer Engineering Fabrication & Prototyping Facility (also known as the Machine Shop)  

E-Print Network [OSTI]

. #12;To help bridge its research efforts with currently available solid state lighting technology outreach to increase campus and community awareness as to the benefits of solid state lighting. About Royal a donation of LED fixtures from Philips Lighting. The Smart Lighting Sustainability Club, comprised

Linhardt, Robert J.

375

Ruofan Wu, Hieu Pham Trung Nguyen and Zetian Mi INTRODUCTION TO LEDs  

E-Print Network [OSTI]

-in-a-Wire Light Emitting Diodes and Prevention Method Nano-electronic Devices and Materials, Electrical Computer., Efficiency droop in nitride-based light-emitting diodes. Physica Status Solidi a-Applications and Materials history. Nature Photonics 2007, 1 (4), 189-192. [4] Holonyak, N., Is the light emitting diode (LED

Barthelat, Francois

376

Coupled optical and electronic simulations of electrically pumped photonic-crystal-based LEDs  

E-Print Network [OSTI]

to investigate design tradeoffs in electrically pumped photonic crystal light emitting diodes. A finite. Keywords: Photonic crystal light emitting diode, electrically pumped device 1. INTRODUCTION Recently optoelectronic devices, such as light emitting diodes (LEDs) and lasers. It has been suggested that a thin slab

Dutton, Robert W.

377

Depth of cure and compressive strength of dental composites cured with blue light emitting diodes (LEDs)  

E-Print Network [OSTI]

Depth of cure and compressive strength of dental composites cured with blue light emitting diodes with either a light emitting diode (LED) based light curing unit (LCU) or a conventional halogen LCU do reserved. Keywords: Blue light emitting diodes; Light curing unit; Composites; Irradiance; Spectrum; Depth

Ashworth, Stephen H.

378

Fort Meade demonstration test LEDS in freezer rooms, fiber optics in display cases  

SciTech Connect (OSTI)

Demonstration projects at Fort George G. Meade, MD, substituted LED lighting for incandescent bulbs in commisary wal-in freezers and fiber optic lighting in reach-in display cases. The goal was to reduce energy consumption and the results were positive. Journal article published in Public Works Digest

Parker, Steven; Parker, Graham B.

2008-10-25T23:59:59.000Z

379

Issues, Models and Solutions for Triac Modulated Phase Dimming of LED Lamps  

E-Print Network [OSTI]

greater than incandescent lamps [1,2]. In fact, recent technological breakthroughs [3-7] in the high of LED lighting: An incandescent source produces 10 ­ 20 lumens/watt, while several manufacturers have? Incandescent bulbs primarily utilize phase modulating dimming through triac switches to control the power sent

Lehman, Brad

380

1 Introduction The development of wind energy use has led to  

E-Print Network [OSTI]

1 Introduction The development of wind energy use has led to a noticeable contribution in of electricity by wind energy acts as a negative load leading to an increase in fluctuations of net load patterns conventional reserves have to be kept ready to replace the wind energy share in case of decreasing wind speeds

Heinemann, Detlev

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

forestry.gov.uk/carboncode The Woodland Carbon Code is an initiative led by the  

E-Print Network [OSTI]

carbon from these projects brings many benefits in addition to carbon sequestration. is effectivelyforestry.gov.uk/carboncode ® The Woodland Carbon Code is an initiative led by the Forestry Commission and supported by a Carbon Advisory Group of UK forest industry and carbon market experts. A buyers

382

Program Led by EM's Carlsbad Field Office Joins Emergency Response in National Exercise  

Broader source: Energy.gov [DOE]

CARLSBAD, N.M. – For the first time, a program led by EM’s Carlsbad Field Office (CBFO) that coordinates analytical capabilities throughout DOE for response to potential radiological incidents joined an exercise to test national readiness for such an event.

383

LED Lighting Flicker and Potential Health Concerns: IEEE Standard PAR1789 Update  

E-Print Network [OSTI]

for mitigating health risks to viewers" has been formed to advise the lighting industry, ANSI/NEMA, IEC, Energy. The effects of flicker can range from decreased visual performance to non-specific malaise to the onset and decisions to be made on development of future LED lamps as the market continues to have explosive growth

Lehman, Brad

384

Chip-Scale Power Conversion for LED Lighting: Integrated Power Chip Converter for Solid-State Lighting  

SciTech Connect (OSTI)

ADEPT Project: Teledyne is developing cost-effective power drivers for energy-efficient LED lights that fit on a compact chip. These power drivers are important because they transmit power throughout the LED device. Traditional LED driver components waste energy and don't last as long as the LED itself. They are also large and bulky, so they must be assembled onto a circuit board separately which increases the overall manufacturing cost of the LED light. Teledyne is shrinking the size and improving the efficiency of its LED driver components by using thin layers of an iron magnetic alloy and new gallium nitride on silicon devices. Smaller, more efficient components will enable the drivers to be integrated on a single chip, reducing costs. The new semiconductors in Teledyne's drivers can also handle higher levels of power and last longer without sacrificing efficiency. Initial applications for Teledyne's LED power drivers include refrigerated grocery display cases and retail lighting.

None

2010-10-01T23:59:59.000Z

385

Phosphors for near UV-Emitting LED's for Efficacious Generation of White Light  

SciTech Connect (OSTI)

1) We studied phosphors for near-UV (nUV) LED application as an alternative to blue LEDs currently being used in SSL systems. We have shown that nUV light sources could be very efficient at high current and will have significantly less binning at both the chip and phosphor levels. We identified phosphor blends that could yield 4100K lamps with a CRI of approximately 80 and LPWnUV,opt equal to 179 for the best performing phosphor blend. Considering the fact that the lamps were not optimized for light coupling, the results are quite impressive. The main bottleneck is an optimum blue phosphor with a peak near 440 nm with a full width half maximum of about 25 nm and a quantum efficiency of >95%. Unfortunately, that may be a very difficult task when we want to excite a phosphor at ~400 nm with a very small margin for Stokes shift. Another way is to have all the phosphors in the blend having the excitation peak at 400 nm or slightly shorter wavelength. This could lead to a white light source with no body color and optimum efficacy due to no self-absorption effects by phosphors in the blend. This is even harder than finding an ideal blue phosphor, but not necessarily impossible. 2) With the phosphor blends identified, light sources using nUV LEDs at high current could be designed with comparable efficacy to those using blue LEDs. It will allow us to design light sources with multiple wattages using the same chips and phosphor blends simply by varying the input current. In the case of blue LEDs, this is not currently possible because varying the current will lower the efficacy at high current and alter the color point. With improvement of phosphor blends, control over CRI could improve. Less binning at the chip level and also at the phosphor blend level could reduce the cost of SSL light sources. 3) This study provided a deeper understanding of phosphor characteristics needed for LEDs in general and nUV LEDs in particular. Two students received Ph.D. degrees and three undergraduates participated in this work. Two of the undergraduate students are now in graduate school. The results were widely disseminated – 20 archival journal publications (published, accepted or in preparation) and three conference proceedings resulted. The students presented their work at 11 different national/international conferences (32 oral or poster presentations) and the PI’s delivered 12 invited, keynote or plenary lectures.

McKittrick, Joanna

2013-09-30T23:59:59.000Z

386

High-Power Warm-White Hybrid LED Package for Illumination  

SciTech Connect (OSTI)

In this project, an integrated warm-white hybrid light engine was developed. The hybrid approach involves combining phosphor-converted off-white InGaN LEDs and direct-emitting red AlInGaP LEDs in a single light engine to achieve high efficacy together with high color rendering index. We developed and integrated technology improvements in InGaN and AlInGaP die technology, phosphor technology, package architecture and encapsulation, to realize a hybrid warm-white LED package with an efficacy of 140 lm/W at a correlated color temperature of 3000K and a color rendering index of 90, measured under representative operating conditions. This efficacy is 26% higher than the best warm-white LEDs of similar specification that are commercially available at the end of the project. Since the InGaN- and AlInGaP-based LEDs used in the hybrid engine show different behavior as a function of current and temperature, a control system needs to be in place to ensure a stable color point over all operating conditions. In this project, we developed an electronic control circuit that is fully integrated into the light engine in such a way that the module can simply be driven by a conventional single-channel driver. The integrated control circuit uses a switch-mode boost converter topology to control the LED drive currents based on the temperature and the input current of the light engine. A color control performance of 5 SDCM was demonstrated, and improvement to 3 SDCM is considered well within reach. The combination of high efficacy and ease of integration with existing single-channel drivers is expected to facilitate the adoption of the hybrid technology and accelerate the energy savings associated with solid-state lighting. In the product commercialization plan, downlights and indirect-lit troffers have been selected as the first target applications for this product concept. Fully functional integrated prototypes have been developed for both applications, and the business case evaluation is ongoing as of the end of the project.

Soer, Wouter

2013-09-19T23:59:59.000Z

387

Joint production and economic retention quantity decisions in capacitated production systems serving multiple market segments  

E-Print Network [OSTI]

: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 44 VITA : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 46 viii LIST OF FIGURES FIGURE Page 1 Sensitivity of the economic retention quantity with respect to the lost sales penalty when r1 = 100, p = 50, h = 12:5, E[X1...] = E[X2] = E[X3] = 100, C1 = C2 = C2 = 100 : : : : : : : : : : : : : : 36 2 Sensitivity of the optimal-produce up-to level with respect to the lost sales penalty when r1 = 100, p = 50, r2 = 40, h = 12:5, E[X1] = E[X2] = E[X3] = 100, C1 = C2 = C2 = 100...

Katariya, Abhilasha Prakash

2009-05-15T23:59:59.000Z

388

Chapter 31 Identification and Listing of Hazardous Waste (Kentucky)  

Broader source: Energy.gov [DOE]

This administrative regulation establishes the general provisions necessary for identification and listing of a hazardous waste. The regulation also establishes the criteria for identifying the...

389

Draft SPD SEIS Master Reference List | National Nuclear Security...  

National Nuclear Security Administration (NNSA)

Policy Act (NEPA) NEPA Reading Room Surplus Plutonium Disposition Supplemental Environmental Impact Statement Draft SPD SEIS Master Reference List Draft SPD SEIS Master...

390

"List of Covered Electric Utilities" under the Public Utility...  

Broader source: Energy.gov (indexed) [DOE]

6 Revised "List of Covered Electric Utilities" under the Public Utility Regulatory Policies Act of 1978 (PURPA) - 2006 Revised Under Title I of the Public Utility Regulatory...

391

List of Publications from the Energy for Development and Poverty...  

Open Energy Info (EERE)

Publications from the Energy for Development and Poverty Reduction Website Jump to: navigation, search Tool Summary LAUNCH TOOL Name: List of Publications from the Energy for...

392

List decoding of subspace codes and rank-metric codes  

E-Print Network [OSTI]

2.2.2 Koetter-Kschischang Codes . . . . . . . . . . . .of Subspace Codes . . . . . . . . . . . . . . 2.3.1 OverviewList-decodable Codes of Arbitrary Dimension . . . . . . .

Mahdavifar, Hessam

2012-01-01T23:59:59.000Z

393

Development of Advanced LED Phosphors by Spray-based Processes for Solid State Lighting  

SciTech Connect (OSTI)

The overarching goal of the project was to develop luminescent materials using aerosol processes for making improved LED devices for solid state lighting. In essence this means improving white light emitting phosphor based LEDs by improvement of the phosphor and phosphor layer. The structure of these types of light sources, displayed in Figure 1, comprises of a blue or UV LED under a phosphor layer that converts the blue or UV light to a broad visible (white) light. Traditionally, this is done with a blue emitting diode combined with a blue absorbing, broadly yellow emitting phosphor such as Y{sub 3}Al{sub 5}O{sub 12}:Ce (YAG). A similar result may be achieved by combining a UV emitting diode and at least three different UV absorbing phosphors: red, green, and blue emitting. These emitted colors mix to make white light. The efficiency of these LEDs is based on the combined efficiency of the LED, phosphor, and the interaction between the two. The Cabot SSL project attempted to improve the over all efficiency of the LED light source be improving the efficiency of the phosphor and the interaction between the LED light and the phosphor. Cabot's spray based process for producing phosphor powders is able to improve the brightness of the powder itself by increasing the activator (the species that emits the light) concentration without adverse quenching effects compared to conventional synthesis. This will allow less phosphor powder to be used, and will decrease the cost of the light source; thus lowering the barrier of entry to the lighting market. Cabot's process also allows for chemical flexibility of the phosphor particles, which may result in tunable emission spectra and so light sources with improved color rendering. Another benefit of Cabot's process is the resulting spherical morphology of the particles. Less light scattering results when spherical particles are used in the phosphor layer (Figure 1) compared to when conventional, irregular shaped phosphor particles are used. This spherical morphology will result in better light extraction and so an improvement of efficiency in the overall device. Cabot is a 2.5 billion dollar company that makes specialized materials using propriety spray based technologies. It is a core competency of Cabot's to exploit the spray based technology and resulting material/morphology advantages. Once a business opportunity is clearly identified, Cabot is positioned to increase the scale of the production to meet opportunity's need. Cabot has demonstrated the capability to make spherical morphology micron-sized phosphor powders by spray based routes for PDP and CRT applications, but the value proposition is still unproven for LED applications. Cabot believes that the improvements in phosphor powders yielded by their process will result in a commercial advantage over existing technologies. Through the SSL project, Cabot has produced a number of different compositions in a spherical morphology that may be useful for solid state lights, as well as demonstrated processes that are able to produce particles from 10 nanometers to 3 micrometers. Towards the end of the project we demonstrated that our process produces YAG:Ce powder that has both higher internal quantum efficiency (0.6 compared to 0.45) and external quantum efficiency (0.85 compared to 0.6) than the commercial standard (see section 3.4.4.3). We, however, only produced these highly bright materials in research and development quantities, and were never able to produce high quantum efficiency materials in a reproducible manner at a commercial scale.

Cabot Corporation

2007-09-30T23:59:59.000Z

394

LED lamp or bulb with remote phosphor and diffuser configuration with enhanced scattering properties  

DOE Patents [OSTI]

An LED lamp or bulb is disclosed that comprises a light source, a heat sink structure and an optical cavity. The optical cavity comprises a phosphor carrier having a conversions material and arranged over an opening to the cavity. The phosphor carrier comprises a thermally conductive transparent material and is thermally coupled to the heat sink structure. An LED based light source is mounted in the optical cavity remote to the phosphor carrier with light from the light source passing through the phosphor carrier. A diffuser dome is included that is mounted over the optical cavity, with light from the optical cavity passing through the diffuser dome. The properties of the diffuser, such as geometry, scattering properties of the scattering layer, surface roughness or smoothness, and spatial distribution of the scattering layer properties may be used to control various lamp properties such as color uniformity and light intensity distribution as a function of viewing angle.

Tong, Tao; Le Toquin, Ronan; Keller, Bernd; Tarsa, Eric; Youmans, Mark; Lowes, Theodore; Medendorp, Jr., Nicholas W; Van De Ven, Antony; Negley, Gerald

2014-11-11T23:59:59.000Z

395

Advanced method for increasing the efficiency of white light quantum dot LEDs  

SciTech Connect (OSTI)

Covering a light-emitting diode (LED) with quantum dots (QDs) can produce a broad spectrum of white light. However, current techniques for applying QDs to LEDs suffer from a high density of defects and a non-uniform distribution of QDs, which, respectively, diminish the efficiency and quality of emitted light. Oak Ridge National Laboratory (ORNL) has the unique capability to thermally anneal QD structures at extremely high power densities for very short durations. This process, called pulse thermal processing (PTP), reduces the number of point defects while maintaining the size and shape of the original QD nanostructure. Therefore, the efficiency of the QD wavelength conversion layer is improved without altering the emission spectrum defined by the size distribution of theQD nanoparticles. The current research uses a thermal model to predict annealing temperatures during PTP and demonstrates up to a 300% increase in photoluminescence for QDs on passive substrates.

Duty, Chad E [ORNL; Bennett, Charlee J C [ORNL; Sabau, Adrian S [ORNL; Jellison Jr, Gerald Earle [ORNL; Boudreaux, Philip R [ORNL; Walker, Steven C [ORNL; Ott, Ronald D [ORNL

2011-01-01T23:59:59.000Z

396

Lumen and Chromaticity Maintenance of LED PAR38 Lamps Operated in Steady-State Conditions  

SciTech Connect (OSTI)

The lumen depreciation and color shift of 38 different lamps (32 LED, 2 CFL, 1 ceramic metal halide [CMH], 3 halogen) were monitored in a specially developed automated long-term test apparatus (ALTA2) for nearly 14,000 hours. Five samples of each lamp model were tested, with measurements recorded on a weekly basis. The lamps were operated continuously at a target ambient temperature between 44°C and 45°C.

Royer, Michael P.

2014-12-01T23:59:59.000Z

397

A portable time-domain LED fluorimeter for nanosecond fluorescence lifetime measurements  

SciTech Connect (OSTI)

Fluorescence lifetime measurements are becoming increasingly important in chemical and biological research. Time-domain lifetime measurements offer fluorescence multiplexing and improved handling of interferers compared with the frequency-domain technique. In this paper, an all solid-state, filterless, and highly portable light-emitting-diode based time-domain fluorimeter (LED TDF) is reported for the measurement of nanosecond fluorescence lifetimes. LED based excitation provides more wavelengths options compared to laser diode based excitation, but the excitation is less effective due to the uncollimated beam, less optical power, and longer latency in state transition. Pulse triggering and pre-bias techniques were implemented in our LED TDF to improve the peak optical power to over 100 mW. The proposed pulsing circuit achieved an excitation light fall time of less than 2 ns. Electrical resetting technique realized a time-gated photo-detector to remove the interference of the excitation light with fluorescence. These techniques allow the LED fluorimeter to accurately measure the fluorescence lifetime of fluorescein down to concentration of 0.5 ?M. In addition, all filters required in traditional instruments are eliminated for the non-attenuated excitation/emission light power. These achievements make the reported device attractive to biochemical laboratories seeking for highly portable lifetime detection devices for developing sensors based on fluorescence lifetime changes. The device was initially validated by measuring the lifetimes of three commercial fluorophores and comparing them with reported lifetime data. It was subsequently used to characterize a ZnSe quantum dot based DNA sensor.

Wang, Hongtao; Salthouse, Christopher D., E-mail: salthouse@ecs.umass.edu [Electrical and Computer Engineering Department, University of Massachusetts, Amherst, Massachusetts 01003 (United States); Center for Personalized Health Monitoring, University of Massachusetts, Amherst, Massachusetts 01003 (United States); Qi, Ying; Mountziaris, T. J. [Center for Personalized Health Monitoring, University of Massachusetts, Amherst, Massachusetts 01003 (United States) [Center for Personalized Health Monitoring, University of Massachusetts, Amherst, Massachusetts 01003 (United States); Chemical Engineering Department, University of Massachusetts, Amherst, Massachusetts 01003 (United States)

2014-05-15T23:59:59.000Z

398

Observed Minimum Illuminance Threshold for Night Market Vendors in Kenya who use LED Lamps  

SciTech Connect (OSTI)

Creation of light for work, socializing, and general illumination is a fundamental application of technology around the world. For those who lack access to electricity, an emerging and diverse range of LED based lighting products hold promise for replacing and/or augmenting their current fuel-based lighting sources that are costly and dirty. Along with analysis of environmental factors, economic models for total cost-ofownership of LED lighting products are an important tool for studying the impacts of these products as they emerge in markets of developing countries. One important metric in those models is the minimum illuminance demanded by end-users for a given task before recharging the lamp or replacing batteries. It impacts the lighting service cost per unit time if charging is done with purchased electricity, batteries, or charging services. The concept is illustrated in figure 1: LED lighting products are generally brightest immediately after the battery is charged or replaced and the illuminance degrades as the battery is discharged. When a minimum threshold level of illuminance is reached, the operational time for the battery charge cycle is over. The cost to recharge depends on the method utilized; these include charging at a shop at a fixed price per charge, charging on personal grid connections, using solar chargers, and purchasing dry cell batteries. This Research Note reports on the observed"charge-triggering" illuminance level threshold for night market vendors who use LED lighting products to provide general and task oriented illumination. All the study participants charged with AC power, either at a fixed-price charge shop or with electricity at their home.

Johnstone, Peter; Jacobson, Arne; Mills, Evan; Radecsky, Kristen

2009-03-21T23:59:59.000Z

399

UMTRA project list of reportable occurrences  

SciTech Connect (OSTI)

This UMTRA Project List of Reportable occurrences is provided to facilitate efficient categorization of reportable occurrences. These guidelines have been established in compliance with DOE minimum reporting requirements under DOE Order 5000.3B. Occurrences are arranged into nine groups relating to US Department of Energy (DOE) Uranium Mill Tailings Remedial Action (UMTRA) Project operations for active sites. These nine groupings are provided for reference to determined whether an occurrence meets reporting requirement criteria in accordance with the minimum reporting requirements. Event groups and significance categories that cannot or will not occur, and that do not apply to UMTRA Project operations, are omitted. Occurrence categorization shall be as follows: Group 1. Facility Condition; Group 2. Environmental; Group 3. Personnel Safety; Group 4. Personnel Radiation Protection; Group 5. Safeguards and Security; Group 6. Transportation; Group 7. Value Basis Reporting; Group 8. Facility Status; and Group 9. Cross-Category Items.

Not Available

1994-04-01T23:59:59.000Z

400

Photovoltaics: Contract lists, fiscal year 1992  

SciTech Connect (OSTI)

US DOE`s Photovoltaics Program has helped photovoltaic technologies evolve from materials and concepts in laboratories to competitive products rolling off automated assembly lines. The program is working to expand industrial capacity while continuing basic and applied technology R and D. This document is a tabulation of photovoltaics R and D that were begun, continued, or completed during this period. National laboratories or industrial, academic, and nonprofit research institutions perform the RR and D activities. The document is organized first by directing organization, then by project title and individual task. Each listing provides the name of contractor, period of performance, funding, objectives, accoplishments, and FY 1993 milestones. An index of contractors is included. (DLC)

Not Available

1993-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

CALiPER Report 20.3: Robustness of LED PAR38 Lamps  

SciTech Connect (OSTI)

Three samples of 40 of the Series 20 PAR38 lamps underwent multi-stress testing, whereby samples were subjected to increasing levels of simultaneous thermal, humidity, electrical, and vibrational stress. The results do not explicitly predict expected lifetime or reliability, but they can be compared with one another, as well as with benchmark conventional products, to assess the relative robustness of the product designs. On average, the 32 LED lamp models tested were substantially more robust than the conventional benchmark lamps. As with other performance attributes, however, there was great variability in the robustness and design maturity of the LED lamps. Several LED lamp samples failed within the first one or two levels of the ten-level stress plan, while all three samples of some lamp models completed all ten levels. One potential area of improvement is design maturity, given that more than 25% of the lamp models demonstrated a difference in failure level for the three samples that was greater than or equal to the maximum for the benchmarks. At the same time, the fact that nearly 75% of the lamp models exhibited better design maturity than the benchmarks is noteworthy, given the relative stage of development for the technology.

Poplawski, Michael E.; Royer, Michael P.; Brown, Charles C.

2014-12-31T23:59:59.000Z

402

Abbreviated epitaxial growth mode (AGM) method for reducing cost and improving quality of LEDs and lasers  

DOE Patents [OSTI]

The use of an abbreviated GaN growth mode on nano-patterned AGOG sapphire substrates, which utilizes a process of using 15 nm low temperature GaN buffer and bypassing etch-back and recovery processes during epitaxy, enables the growth of high-quality GaN template on nano-patterned AGOG sapphire. The GaN template grown on nano-patterned AGOG sapphire by employing abbreviated growth mode has two orders of magnitude lower threading dislocation density than that of conventional GaN template grown on planar sapphire. The use of abbreviated growth mode also leads to significant reduction in cost of the epitaxy. The growths and characteristics of InGaN quantum wells (QWs) light emitting diodes (LEDs) on both templates were compared. The InGaN QWs LEDs grown on the nano-patterned AGOG sapphire demonstrated at least a 24% enhancement of output power enhancement over that of LEDs grown on conventional GaN templates.

Tansu, Nelson; Chan, Helen M; Vinci, Richard P; Ee, Yik-Khoon; Biser, Jeffrey

2013-09-24T23:59:59.000Z

403

WHAT THE SMART GRID MEANS TO YOU AND THE PEOPLE YOU SERVE.  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomen Owned SmallOf The 2012NuclearBradley Nickell Director ofDepartmentSERVE.

404

Central Illinois Pub Serv Co (Illinois) EIA Revenue and Sales - February  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy Information on PV2009 | Open Energy Information Pub Serv Co for

405

Central Illinois Pub Serv Co (Illinois) EIA Revenue and Sales - January  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy Information on PV2009 | Open Energy Information Pub Serv Co

406

Central Illinois Pub Serv Co (Illinois) EIA Revenue and Sales - January  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy Information on PV2009 | Open Energy Information Pub Serv Co2009 |

407

Central Illinois Pub Serv Co (Illinois) EIA Revenue and Sales - June 2008 |  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy Information on PV2009 | Open Energy Information Pub Serv Co2009

408

Central Illinois Pub Serv Co (Illinois) EIA Revenue and Sales - March 2008  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy Information on PV2009 | Open Energy Information Pub Serv Co2009|

409

Central Illinois Pub Serv Co (Illinois) EIA Revenue and Sales - May 2008 |  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy Information on PV2009 | Open Energy Information Pub Serv

410

Central Illinois Pub Serv Co (Illinois) EIA Revenue and Sales - November  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy Information on PV2009 | Open Energy Information Pub Serv2008 |

411

Central Illinois Pub Serv Co (Illinois) EIA Revenue and Sales - October  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy Information on PV2009 | Open Energy Information Pub Serv2008

412

Central Illinois Pub Serv Co (Illinois) EIA Revenue and Sales - September  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy Information on PV2009 | Open Energy Information Pub Serv20082008

413

Text-Alternative Version: LED Site Lighting in the Commercial Building Sector: Opportunities, Challenges, and the CBEA Performance Specification  

Broader source: Energy.gov [DOE]

Below is the text-alternative version of the LED Site Lighting in the Commercial Building Sector: Opportunities, Challenges, and the CBEA Performance Specification webcast.

414

Barron's Own Chicken-Fried Carrot Sticks breaded and lightly fried until golden brown; served with homemade sriracha ranch $4  

E-Print Network [OSTI]

with homemade sriracha ranch $4 Potato Croquettes-- whipped potatoes blended with seasonal ingredients Cheese Sticks­ served with homemade ranch and marinara $4 S T A R T E R S SERVING LUNCH * Monday ­ Friday-- fresh romaine, penne pasta, chicken breast and parmesan cheese tossed in Caesar dressing; finished

Azevedo, Ricardo

415

Searching Instructions "How do I access the rental listings?"  

E-Print Network [OSTI]

from any page on our web site to access the Housing Registry program. Follow the instructions to your UCSC e-mail account as they are posted on the Community Rentals' web site. You must search through yourself from the mailing list at any time through the "Waiting List Removal" web page on the Housing

California at Santa Cruz, University of

416

Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER  

E-Print Network [OSTI]

Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER Subject Description Monday, July AND INSURANCE 242 ACTUARIAL SCIENCE 243 TRANSPORTATION AND PUBLIC UTILITIES 244 CLASSICS 250 COMMUNICATION ARTS;Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER Subject Description Monday, July 14, 2014

Wisconsin at Madison, University of

417

Page 1 of 1 Price list for the NORTEM facilities  

E-Print Network [OSTI]

Page 1 of 1 Price list for the NORTEM facilities 1. April 2013 ­ 31. March 2014 The following prices apply to all activities from April 1st 2013, and should be used as a basis for applications for future funding. The price list is preliminary, changes should be expected when the full NORTEM running

Johansen, Tom Henning

418

TC1 Parts List Quantity Size Description **Possible Vendor  

E-Print Network [OSTI]

TC1 Parts List Quantity Size Description **Possible Vendor Source 1 3.5"od x 20" Clear Acrylic tube stripped Radio Shack Other parts as required. **This is just a list of possible vendor sources. Please note, some vendors have minimums for orders. #12;

Barrash, Warren

419

Electrical Engineering Math/Science/Engineering Elective List  

E-Print Network [OSTI]

Rev 3/07 Electrical Engineering Math/Science/Engineering Elective List Math/Science/Engineering Electives, as defined by the Electrical Engineering Program, are listed below: * Course must be taken units) Courses that can be used to fulfill this requirement: Within the College of Engineering · Any

Bigelow, Stephen

420

Inventory List Item Number Brief Description Price Preferred Vendor  

E-Print Network [OSTI]

Inventory List UT Austin Item Number Brief Description Price Preferred Vendor E0060 1 kb DNA Ladder0042 Taq DNA Polymerase - 2,000 units $224.48 NEWEN 4/21/14 Page - 1 #12;Inventory List UT Austin Item

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Inventory List Item Number Brief Description Price Preferred Vendor  

E-Print Network [OSTI]

Inventory List UT Austin Item Number Brief Description Price Preferred Vendor Y0044 #BL21 STAR DE3.44 LIFET Y0041 Purelink Genomic DNA (50) $90.39 LIFET 4/21/14 Page - 1 #12;Inventory List UT Austin Item

422

LED Light Fixture Project FC1 Director's Conference Room: Life Cycle Cost and Break-even Analysis  

E-Print Network [OSTI]

. A light-emitting diode (LED) is a solid-state lighting source that switches on instantly, is readilyLED Light Fixture Project ­ FC1 Director's Conference Room: Life Cycle Cost and Break-even Analysis light fixtures in existing or new buildings across campus. Scope of Work On August 27, 2012, the six

Johnston, Daniel

423

LED Traffic Light as a Communications Device Grantham Pang, Thomas Kwan, Chi-Ho Chan, Hugh Liu.  

E-Print Network [OSTI]

:http://www.eee.hku.hk/~gpang Abstract The visible light from an LED (light emitting diode) traffic light can be modulated and encoded on the description of an audio information system made up of high brightness, visible light emitting diodes (LEDs messages 1. Introduction Recently, high intensity light emitting diodes for traffic signals are available

Pang, Grantham

424

SciTech Connect: Demonstration of LED Street Lighting in Kansas City, MO  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administrationcontroller systems controllerAdditiveBetatronAerogel Deep BedDemonstration of LED

425

LED Provides Effective and Efficient Parking Area Lighting at the NAVFAC Engineering Service Center  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe10 DOEWashington, DCKickoffLDV HVAC ModelLEDLightsLED parking

426

Kenya-EC-LEDS in the Agriculture Sector | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place: EdenOverviewKanematsuKas FarmsKenstonsourceKenworthEC-LEDS

427

Philips Light Sources & Electronics is Developing an Efficient, Smaller, Cost-Effective Family of LED Drivers  

Broader source: Energy.gov [DOE]

With the help of DOE funding, Philips Light Sources & Electronics is developing a new family of LED drivers that are more efficient and cost-effective as well as smaller in size than currently available drivers. The new drivers are switch-mode power supplies that are similar to today's drivers, but with an improved design. In addition, they have a different topology—boost plus LLC—for wattages of 40W and above, but they retain the commonly used flyback topology at lower wattages.

428

Appendix 15 Red and Blue-Listed Vertebrate and Vascular Plant Species The  

E-Print Network [OSTI]

Appendix 15 Red and Blue-Listed Vertebrate and Vascular Plant Species The report that follows lists red- and blue-listed species occurring in the Cranbrook Forest District and in the Southern Rocky risk' as either vulnerable in BC (Blue-listed), or endangered or threatened (Red-listed). The species

429

Random Deployment of Data Collectors for Serving Randomly-Located Sensors  

E-Print Network [OSTI]

Recently, wireless communication industries have begun to extend their services to machine-type communication devices as well as to the user equipment. Such machine-type communication devices as meters and sensors need intermittent uplink resources to report measured or sensed data to their serving data collector. It is however hard to dedicate limited uplink resources to each of them. Thus, efficient service of a tremendous number of devices with low activities may consider simple random access as a solution. The data collectors receiving the measured data from many sensors simultaneously can successfully decode only signals with signal-to-interference-plus-noise-ratio (SINR) above a certain value. The main design issues for this environment become how many data collectors are needed, how much power sensor nodes transmit with, and how wireless channels affect the performance. This paper provides answers to those questions through a stochastic analysis based on a spatial point process and on simulations.

Kwon, Taesoo

2011-01-01T23:59:59.000Z

430

Revolutionary Method for Increasing the Efficiency of White Light Quantum Dot LEDs  

SciTech Connect (OSTI)

Covering a light-emitting diode (LED) with quantum dots (QDs) can produce a broad spectrum of white light. However, current techniques for applying QDs to LEDs suffer from a high density of defects and a non-uniform distribution of QDs, which respec-tively diminish the efficiency and quality of emitted light. Oak Ridge National Laboratory (ORNL) has the unique capability to thermally anneal QD structures at extremely high power densities for very short durations. This process, called pulse thermal proc-essing (PTP), reduces the number of point defects while main-taining the size and shape of the original QD nanostructure. Therefore, the efficiency of the QD wavelength conversion layer is improved without altering the emission spectrum defined by the size distribution of the quantum dot nanoparticles. The cur-rent research uses a thermal model to predict annealing tempera-tures during PTP and demonstrates up to a 300% increase in pho-toluminescence for QDs on passive substrates

Duty, Chad E [ORNL; Bennett, Charlee J C [ORNL; Sabau, Adrian S [ORNL; Jellison Jr, Gerald Earle [ORNL; Boudreaux, Philip R [ORNL; Walker, Steven C [ORNL; Ott, Ronald D [ORNL

2011-01-01T23:59:59.000Z

431

Demonstration Assessment of Light-Emitting Diode (LED) Street Lighting Host Site: Lija Loop, Portland, Oregon  

SciTech Connect (OSTI)

This report describes the process and results of a demonstration of solid-state lighting (SSL) technology in a residential street lighting application, under the U.S. Department of Energy GATEWAY Solid-State Lighting Technology Demonstration Program. In this project, eight 100W (nominal) high-pressure sodium cobra head fixtures were replaced with a like number of LED street light luminaires manufactured by Leotek, Inc. The Leotek product achieved an estimated payback in the Lija Loop installation of about 20 years for replacement scenarios and a much shorter 7.6 years for new installations. Much of the associated energy savings (55%) supporting these payback periods, however, were achieved by reducing average horizontal photopic illuminance a similar amount (53%). Examined from a different perspective, the measured performance suggests that the Leotek product is at approximate parity with the HPS cobra head in terms of average delivered photopic illumination for a given power consumption. HPS comprises the second most efficacious street lighting technology available, exceeded only by low pressure sodium (LPS). LPS technology is not considered suitable for most street lighting applications due to its monochromatic spectral output and poor color rendering ability; therefore, this LED product is performing at an efficiency level comparable to its primary competition in this application.

Kinzey, Bruce R.; Myer, Michael

2009-11-01T23:59:59.000Z

432

Development of substrate-removal-free vertical ultraviolet light-emitting diode (RefV-LED)  

SciTech Connect (OSTI)

A vertical ultraviolet (UV) light-emitting diode (LED) that does not require substrate removal is developed. Spontaneous via holes are formed in n-AlN layer epitaxially grown on a high conductive n+Si substrate and the injected current flows directly from the p-electrode to high doped n{sup +} Si substrate through p-AlGaN, multi-quantum wells, n-AlGaN and spontaneous via holes in n-AlN. The spontaneous via holes were formed by controlling feeding-sequence of metal-organic gas sources and NH{sub 3} and growth temperature in MOCVD. The via holes make insulating n-AlN to be conductive. We measured the current-voltage, current-light intensity and emission characteristics of this device. It exhibited a built-in voltage of 3.8 V and emission was stated at 350 nm from quantum wells with successive emission centered at 400?nm. This UV LED can be produced, including formation of n and p electrodes, without any resist process.

Kurose, N., E-mail: kurose@fc.ritsumei.ac.jp; Aoyagi, Y. [The Research Organization of Science and Technology, Ritsumeikan University, 1-1-1, Noji-higashi, Kusatsu, Shiga 525-8577 (Japan)] [The Research Organization of Science and Technology, Ritsumeikan University, 1-1-1, Noji-higashi, Kusatsu, Shiga 525-8577 (Japan); Shibano, K.; Araki, T. [Department of Science and Technology, Ritsumeikan University, 1-1-1, Noji-higashi, Kusatsu, Shiga 525-8577 (Japan)] [Department of Science and Technology, Ritsumeikan University, 1-1-1, Noji-higashi, Kusatsu, Shiga 525-8577 (Japan)

2014-02-15T23:59:59.000Z

433

Demonstration of LED Retrofit Lamps at the Jordan Schnitzer Museum of Art  

SciTech Connect (OSTI)

The Jordan Schnitzer Museum of Art in Eugene, Oregon, houses a remarkable permanent collection of Asian art and antiquities, modern art, and sculpture, and also hosts traveling exhibitions. In the winter and spring of 2011, a series of digital photographs by artist Chris Jordan, titled "Running the Numbers," was exhibited in the Coeta and Donald Barker Special Exhibitions Gallery. These works graphically illustrate waste (energy, money, health, consumer objects, etc.) in contemporary culture. The Bonneville Power Administration and the Eugene Water and Electricity Board provided a set of Cree 12W light-emitting diode (LED) PAR38 replacement lamps (Cree LRP38) for the museum to test for accent lighting in lieu of their standard Sylvania 90W PAR38 130V Narrow Flood lamps (which draw 78.9W at 120V). At the same time, the museum tested LED replacement lamps from three other manufacturers, and chose the Cree lamp as the most versatile and most appropriate color product for this exhibit. The lamps were installed for the opening of the show in January 2011. This report describes the process for the demonstration, the energy and economic results, and results of a survey of the museum staff and gallery visitors on four similar clusters of art lighted separately by four PAR38 lamps.

Miller, Naomi J.

2011-09-01T23:59:59.000Z

434

Creating a word list for technical and clerical personnel  

SciTech Connect (OSTI)

The Savannah River Plant and Laboratory employ more than 16,000 people. When the separate Publications Divisions of the Plant and Laboratory were combined it was determined that a single source of information for using terms was needed, and that the source would take the form of a word list. The Word List was issued to more than 5000 employees onsite. In addition, the Word List is being added to the site computer network as a reference document and as an online spelling checker where more than 2000 employees will have access to it through their personal computers.

Hammond, J S

1988-05-01T23:59:59.000Z

435

Solar thermal energy contract list, fiscal year 1990  

SciTech Connect (OSTI)

The federal government has conducted the national Solar Thermal Technology Program since 1975. Its purpose is to provide focus, direction, and funding for the development of solar thermal technology as an energy option for the United States. This year's document is more concise than the summaries of previous years. The FY 1990 contract overview comprises a list of all subcontracts begun, ongoing, or completed during FY 1990 (October 1, 1989, through September 30, 1990). Under each managing laboratory projects are listed alphabetically by project area and then by subcontractor name. Amount of funding milestones are listed.

Not Available

1991-09-01T23:59:59.000Z

436

Wideband dichroic-filter design for LED-phosphor beam-combining  

DOE Patents [OSTI]

A general method is disclosed of designing two-component dichroic short-pass filters operable for incidence angle distributions over the 0-30.degree. range, and specific preferred embodiments are listed. The method is based on computer optimization algorithms for an N-layer design, specifically the N-dimensional conjugate-gradient minimization of a merit function based on difference from a target transmission spectrum, as well as subsequent cycles of needle synthesis for increasing N. A key feature of the method is the initial filter design, upon which the algorithm proceeds to iterate successive design candidates with smaller merit functions. This initial design, with high-index material H and low-index L, is (0.75 H, 0.5 L, 0.75 H)^m, denoting m (20-30) repetitions of a three-layer motif, giving rise to a filter with N=2 m+1.

Falicoff, Waqidi

2010-12-28T23:59:59.000Z

437

Retail Lamps Study 3.1: Dimming, Flicker, and Power Quality Characteristics of LED A Lamps.  

SciTech Connect (OSTI)

To date, all three reports in the retail lamps series have focused on basic performance parameters, such as lumen output, efficacy, and color quality. This report goes a step further, examining the photoelectric characteristics (i.e., dimming and flicker) of a subset of lamps from CALiPER Retails Lamps Study 3. Specifically, this report focuses on the dimming, power quality, and flicker characteristics of 14 LED A lamps, as controlled by four different retail-available dimmers. The results demonstrate notable variation across the various lamps, but little variation between the four dimmers. Overall, the LED lamps: ~tended to have higher relative light output compared to the incandescent and halogen benchmark at the same dimmer output signal (RMS voltage). The lamps’ dimming curves (i.e., the relationship between control signal and relative light output) ranged from linear to very similar to the square-law curve typical of an incandescent lamp. ~generally exhibited symmetrical behavior—the same dimming curve—when measured proceeding from maximum to minimum or minimum to maximum control signal. ~mostly dimmed below 10% of full light output, with some exceptions for specific lamp and dimmer combinations ~exhibited a range of flicker characteristics, with many comparing favorably to the level typical of a magnetically-ballasted fluorescent lamp through at least a majority of the dimming range. ~ always exceeded the relative (normalized) efficacy over the dimming range of the benchmark lamps, which rapidly decline in efficacy when they are dimmed. This report generally does not attempt to rank the performance of one product compared to another, but instead focuses on the collective performance of the group versus conventional incandescent or halogen lamps, the performance of which is likely to be the baseline for a majority of consumers. Undoubtedly, some LED lamps perform better—or more similar to conventional lamps—than others. Some perform desirably for one characteristic, but not others. Consumers (and specifiers) may have a hard time distinguishing better-performing lamps from one another; at this time, physical experimentation is likely the best evaluation tool.

Royer, Michael P.; Poplawski, Michael E.; Brown, Charles C.

2014-12-14T23:59:59.000Z

438

Single proteins that serve linked functions in intracellular and extracellular microenvironments  

SciTech Connect (OSTI)

Maintenance of organ homeostasis and control of appropriate response to environmental alterations requires intimate coordination of cellular function and tissue organization. An important component of this coordination may be provided by proteins that can serve distinct, but linked, functions on both sides of the plasma membrane. Here we present a novel hypothesis in which non-classical secretion can provide a mechanism through which single proteins can integrate complex tissue functions. Single genes can exert a complex, dynamic influence through a number of different processes that act to multiply the function of the gene product(s). Alternative splicing can create many different transcripts that encode proteins of diverse, even antagonistic, function from a single gene. Posttranslational modifications can alter the stability, activity, localization, and even basic function of proteins. A protein can exist in different subcellular localizations. More recently, it has become clear that single proteins can function both inside and outside the cell. These proteins often lack defined secretory signal sequences, and transit the plasma membrane by mechanisms separate from the classical ER/Golgi secretory process. When examples of such proteins are examined individually, the multifunctionality and lack of a signal sequence are puzzling - why should a protein with a well known function in one context function in such a distinct fashion in another? We propose that one reason for a single protein to perform intracellular and extracellular roles is to coordinate organization and maintenance of a global tissue function. Here, we describe in detail three specific examples of proteins that act in this fashion, outlining their specific functions in the extracellular space and in the intracellular space, and we discuss how these functions may be linked. We present epimorphin/syntaxin-2, which may coordinate morphogenesis of secretory organs (as epimorphin) with control of protein secretion (as syntaxin-2), amphoterin/high mobility group box-1 (HMGB1), which may link inflammation (as amphoterin) with regulation of gene expression (as HMGB1), and tissue transglutaminase, which affects delivery of and response to apoptotic signals by serving a related function on both sides of the plasma membrane. As it is notable that all three of these proteins have been reported to transit the plasma membrane through non-classical secretory mechanisms, we will also discuss why coordinated inside/outside functions may be found in some examples of proteins which transit the plasma membrane through non-classical mechanisms and how this relationship can be used to identify additional proteins that share these characteristics.

Radisky, Derek C.; Stallings-Mann, Melody; Hirai, Yohei; Bissell, Mina J.

2009-06-03T23:59:59.000Z

439

E-Print Network 3.0 - agency listed hazardous Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Listing of Hazardous Waste 40 CFR... Hazardous Waste Management Regulations 6 NYCRR 371 Identification and Listing of Hazardous Waste 6 NYCRR 372... Substance Bulk Storage...

440

LED Lighting in a Performing Arts Building at the University of Florida  

SciTech Connect (OSTI)

The U.S. DOE GATEWAY Demonstration Program supports demonstrations of high-performance solid-state lighting (SSL) products in order to develop empirical data and experience with the in-the-field applications of this advanced lighting technology. This report describes the process and results of the 2013 - 2014 GATEWAY demonstration of SSL technology in the Nadine McGuire Theatre and Dance Pavilion at the University of Florida, Gainesville, FL. The LED solutions combined with dimming controls utilized in four interior spaces - the Acting Studio, Dance Studio, Scene Shop, and Dressing Room - received high marks from instructors, students/performers, and reduced energy use in all cases. The report discusses in depth and detail of each project area including specifications, energy savings, and user observations. The report concludes with lessons learned during the demonstration.

Miller, Naomi J.; Kaye, Stan; Coleman, Patricia; Wilkerson, Andrea M.; Perrin, Tess E.; Sullivan, Gregory P.

2014-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

LED Surgical Task Lighting Scoping Study: A Hospital Energy Alliance Project  

SciTech Connect (OSTI)

Tungsten-halogen (halogen) lamps have traditionally been used to light surgical tasks in hospitals, even though they are in many respects ill-suited to the application due to the large percentage of radiant energy outside the visible spectrum and issues with color rendering/quality. Light-emitting diode (LED) technology offers potential for adjustable color and improved color rendition/quality, while simultaneously reducing side-effects from non-visible radiant energy. It also has the potential for significant energy savings, although this is a fairly narrow application in the larger commercial building energy use sector. Based on analysis of available products and Hospital Energy Alliance member interest, it is recommended that a product specification and field measurement procedure be developed for implementation in demonstration projects.

Tuenge, Jason R.

2011-01-17T23:59:59.000Z

442

automated problem list: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

21 22 23 24 25 Next Page Last Page Topic Index 1 Linked Lists Binary trees OOP for Automation and Robotics Computer Technologies and Information Sciences Websites Summary: Linked...

443

Publications: Mohammad Rashedul Hasan Page 1 List of Publications  

E-Print Network [OSTI]

Publications: Mohammad Rashedul Hasan Page 1 List of Publications Mohammad Rashedul Hasan Book Mohammad Rashedul Hasan, An Iterative Cluster Formation Routing Protocol for Wireless Sensor Network, VDM Journal Nayeema Sadeque, Neva Agarwala and Mohammad Rashedul Hasan, "An Adaptive Clustering Scheme

Raja, Anita

444

Dean's List Spring 2011 Harpur College of Arts and Sciences  

E-Print Network [OSTI]

Dean's List Spring 2011 Harpur College of Arts and Sciences Abbate, Jennifer A. Abdel-Jawad, Nadeem. Auwarter, John J. Avery, Corey P. Avila, Moraina M. Axelson, Aaron P. Ba, Oulimata J. Bac, Hay Rang

Suzuki, Masatsugu

445

"List of Covered Electric Utilities" under the Public Utility...  

Broader source: Energy.gov (indexed) [DOE]

8 "List of Covered Electric Utilities" under the Public Utility Regulatory Policies Act of 1978 (PURPA) - 2008 Under Title I of the Public Utility Regulatory Policies Act of 1978...

446

"List of Covered Electric Utilities" under the Public Utility...  

Broader source: Energy.gov (indexed) [DOE]

9 "List of Covered Electric Utilities" under the Public Utility Regulatory Policies Act of 1978 (PURPA) - 2009 Under Title I, Sec. 102(c) of the Public Utility Regulatory Policies...

447

Announcing the "Top 10" List of Green Utility Leaders | Department...  

Broader source: Energy.gov (indexed) [DOE]

the "Top 10" List of Green Utility Leaders June 7, 2013 - 5:10pm Addthis Ranking the Top Green Power Providers See All Leaders x Renewable Energy Sales Total Customer Participants...

448

Discovery Grant Program Awards, Listed by PI Last Name  

E-Print Network [OSTI]

in the Desaguaero Basin, Bolivia #12;Discovery Grant Program Awards, Listed by PI Last Name 1999-Present Award Year facility 2000 (Spring 2000) Tom Weiler Physics & Astronomy Particle Astrophysics at Extreme Energies 2001

Simaan, Nabil

449

Oil and gas field code master list, 1993  

SciTech Connect (OSTI)

This document contains data collected through October 1993 and provides standardized field name spellings and codes for all identified oil and/or gas fields in the United States. Other Federal and State government agencies, as well as industry, use the EIA Oil and Gas Field Code Master List as the standard for field identification. A machine-readable version of the Oil and Gas Field Code Master List is available from the National Technical Information Service.

Not Available

1993-12-16T23:59:59.000Z

450

cs281: Introduction to Computer Systems Lab03 K-Map Simplification for an LED-based Circuit  

E-Print Network [OSTI]

(one of the dial knobs at the bottom of the breadboard), use the Arduino to convert that analog input the LEDs. The second section will add in the dial knob (potentiometer) to Arduino and the Arduino providing

Kretchmar, R. Matthew

451

Design and fabrication of high-index-contrast self-assembled texture for light extraction enhancement in LEDs  

E-Print Network [OSTI]

We developed a high-index-contrast photonic structure for improving the light extraction efficiency of light-emitting diodes (LEDs) by a self-assembly approach. In this approach, a two-dimensional grating can be ...

Sheng, Xing

452

CALiPER Report 20.1: Quality of Beam, Shadow, and Color in LED PAR38 Lamps  

Broader source: Energy.gov [DOE]

View the video about CALiPER Report 20.1 which focuses on human-evaluated characteristics, including beam quality, shadow quality, and color quality in LED PAR38 lamps.

453

Demonstration Assessment of Light-Emitting Diode (LED) Accent Lighting at the Field Museum in Chicago, IL  

SciTech Connect (OSTI)

This report reviews a demonstration of light-emitting diode (LED) accent lighting compared to halogen (typical) accent lighting in a gallery of the Field Museum in Chicago, IL.

Myer, Michael; Kinzey, Bruce R.

2010-12-10T23:59:59.000Z

454

Long-term Testing Results for the 2008 Installation of LED Luminaires at the I-35 West Bridge in Minneapolis  

SciTech Connect (OSTI)

This document reports the long-term testing results from an extended GATEWAY project that was first reported in “Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting at the I-35W Bridge, in Minneapolis, MN,” August 2009. That original report presented the results of lighting the newly reconstructed I 35W Bridge using LEDs in place of conventional high-pressure sodium (HPS) roadway luminaires, comparing energy use and illuminance levels with a simulated baseline condition. That installation was an early stage implementation of LED lighting and remains one of the oldest installations in continued operation today. This document provides an update of the LED system’s performance since its installation in September 2008.

Kinzey, Bruce R.; Davis, Robert G.

2014-09-30T23:59:59.000Z

455

Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting on Residential and Commercial Streets in Palo Alto, CA  

SciTech Connect (OSTI)

This report is part of a GATEWAY demonstration that replaced existing HPS streetlights with two different types of LED products and one induction product. Energy savings ranged from 6% to 44%.

Myer, Michael; Kinzey, Bruce R.; Tam, Christine

2010-06-24T23:59:59.000Z

456

GaN-Ready Aluminum Nitride Substrates for Cost-Effective, Very Low Dislocation Density III-Nitride LED's  

SciTech Connect (OSTI)

The objective of this project was to develop and then demonstrate the efficacy of a costeffective approach for a low defect density substrate on which AlInGaN LEDs can be fabricated. The efficacy of this “GaN-ready” substrate would then be tested by growing high efficiency, long lifetime InxGa1-xN blue LEDs. The approach used to meet the project objectives was to start with low dislocation density AlN single-crystal substrates and grow graded AlxGa1-xN layers on top. Pseudomorphic AlxGa1-xN epitaxial layers grown on bulk AlN substrates were used to fabricate light emitting diodes and demonstrate better device performance as a result of the low defect density in these layers when benched marked against state-of-the-art LEDs fabricated on sapphire substrates. The pseudomorphic LEDs showed excellent output powers compared to similar wavelength devices grown on sapphire substrates, with lifetimes exceeding 10,000 hours (which was the longest time that could reliably be estimated). In addition, high internal quantum efficiencies were demonstrated at high driving current densities even though the external quantum efficiencies were low due to poor photon extraction. Unfortunately, these pseudomorphic LEDs require high Al content so they emit in the ultraviolet. Sapphire based LEDs typically have threading dislocation densities (TDD) > 108 cm-2 while the pseudomorphic LEDs have TDD ? 105 cm-2. The resulting TDD, when grading the AlxGa1-xN layer all the way to pure GaN to produce a “GaN-ready” substrate, has varied between the mid 108 down to the 106 cm-2. These inconsistencies are not well understood. Finally, an approach to improve the LED structures on AlN substrates for light extraction efficiency was developed by thinning and roughening the substrate.

Sandra Schujman; Leo Schowalter

2010-10-15T23:59:59.000Z

457

Fundamental Studies and Development of III-N Visible LEDs for High-Power Solid-State Lighting Applications  

SciTech Connect (OSTI)

The goal of this program is to understand in a fundamental way the impact of strain, defects, polarization, and Stokes loss in relation to unique device structures upon the internal quantum efficiency (IQE) and efficiency droop (ED) of III-nitride (III-N) light-emitting diodes (LEDs) and to employ this understanding in the design and growth of high-efficiency LEDs capable of highly-reliable, high-current, high-power operation. This knowledge will be the basis for our advanced device epitaxial designs that lead to improved device performance. The primary approach we will employ is to exploit new scientific and engineering knowledge generated through the application of a set of unique advanced growth and characterization tools to develop new concepts in strain-, polarization-, and carrier dynamics-engineered and low-defect materials and device designs having reduced dislocations and improved carrier collection followed by efficient photon generation. We studied the effects of crystalline defect, polarizations, hole transport, electron-spillover, electron blocking layer, underlying layer below the multiplequantum- well active region, and developed high-efficiency and efficiency-droop-mitigated blue LEDs with a new LED epitaxial structures. We believe new LEDs developed in this program will make a breakthrough in the development of high-efficiency high-power visible III-N LEDs from violet to green spectral region.

Dupuis, Russell

2012-02-29T23:59:59.000Z

458

Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting at the I-35W Bridge, Minneapolis, MN  

SciTech Connect (OSTI)

This report describes the process and results of a demonstration of solid-state lighting (SSL) technology conducted in 2009 at the recently reconstructed I-35W bridge in Minneapolis, MN. The project was supported under the U.S. Department of Energy (DOE) Solid-State Lighting GATEWAY Technology Demonstration Program. Other participants in the demonstration project included the Minnesota Department of Transportation (Mn/DOT), Federal Highways Administration (FHWA), and BetaLED™ (a division of Ruud Lighting). Pacific Northwest National Laboratory (PNNL) conducted the measurements and analysis of the results. DOE has implemented a three-year evaluation of the LED luminaires in this installation in order to develop new longitudinal field data on LED performance in a challenging, real-world environment. This document provides information through the initial phase of the I-35W bridge project, up to and including the opening of the bridge to the public and the initial feedback received on the LED lighting installation from bridge users. Initial findings of the evaluation are favorable, with minimum energy savings level of 13% for the LED installation relative to the simulated base case using 250W high-pressure sodium (HPS) fixtures. The LEDs had an average illuminance level of 0.91 foot candles compared to 1.29 fc for the HPS lamps. The LED luminaires cost $38,000 more than HPS lamps, yielding a lengthy payback period, however the bridge contractor had offered to include the LED luminaires as part of the construction package at no additional cost. One potentially significant benefit of the LEDs in this installation is avoiding rolling lane closures on the heavily-traveled interstate bridge for the purpose of relamping the HPS fixtures. Rolling lane closures involve multiple crew members and various maintenance and safety vehicles, diversion of traffic, as well as related administrative tasks (e.g., approvals, scheduling, etc.). Mn/DOT records show an average cost of relamping fixtures along interstate roadways of between $130-150 per pole. The previous bridge saw a lamp mortality rate of approximately 50% every two years, though the new bridge was designed to minimize many of the vibration issues. A voluntary Web-based feedback survey of nearly 500 self-described bridge users showed strong preference for the LED lighting - positive comments outnumbered negative ones by about five-to-one.

Kinzey, Bruce R.; Myer, Michael

2009-08-31T23:59:59.000Z

459

Color stable phosphors for LED lamps and methods for preparing them  

DOE Patents [OSTI]

An LED lamp includes a light source configured to emit radiation with a peak intensity at a wavelength between about 250 nm and about 550 nm; and a phosphor composition configured to be radiationally coupled to the light source. The phosphor composition includes particles of a phosphor of formula I, said particles having a coating composition disposed on surfaces thereof; ((Sr.sub.1-zM.sub.z).sub.1-(x+w)A.sub.wCe.sub.x).sub.3(Al.sub.1-ySi.sub.y-)O.sub.4+y+3(x-w)F.sub.1-y-3(x-w) I wherein the coating composition comprises a material selected from aluminum oxide, magnesium oxide, calcium oxide, barium oxide, strontium oxide, zinc oxide, aluminum hydroxide, magnesium hydroxide, calcium hydroxide, barium hydroxide, strontium hydroxide, zinc hydroxide, aluminum phosphate, magnesium phosphate, calcium phosphate, barium phosphate, strontium phosphate, and combinations thereof; and A is Li, NA, K, or Rb, or a combination thereof; M is Ca, Ba, Mg, Zn, or a combination thereof; and 0

Murphy, James Edward; Setlur, Anant Achyut; Camardello, Samuel Joseph

2013-11-26T23:59:59.000Z

460

Replacement of Lighting Fixtures with LED Energy Efficient Lights at the Parking Facility, Milwaukee, Wisconsin  

SciTech Connect (OSTI)

The Forest County Potawatomi Community (FCPC or Tribe) owns a six-story parking facility adjacent to its Potawatomi Bingo Casino (the Casino) in Milwaukee, Wisconsin, as well as a valet parking facility under the Casino (collectively, the Parking Facility). The Parking Facility contained 205-watt metal halide-type lights that, for security reasons, operated 24 hours per day, 7 days per week. Starting on August 30, 2010, the Tribe replaced these fixtures with 1,760 state-of-the-art, energy efficient 55-Watt LED lights. This project resulted in an immediate average reduction in monthly peak demand of 238 kW over the fourth quarter of 2010. The average reduction in monthly peak demand from October 1 through December 31, 2010 translates into a forecast annual electrical energy reduction of approximately 1,995,000 kWh or 47.3% of the pre-project demand. This project was technically effective, economically feasible, and beneficial to the public not only in terms of long term energy efficiency and associated emissions reductions, but also in the short-term jobs provided for the S.E. Wisconsin region. The project was implemented, from approval by U.S. Department of Energy (DOE) to completion, in less than 6 months. The project utilized off-the-shelf proven technologies that were fabricated locally and installed by local trade contractors.

David Brien

2012-06-21T23:59:59.000Z

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Blue MedicareRx (PDP)SM 2012 Comprehensive Drug List  

E-Print Network [OSTI]

Blue MedicareRx (PDP)SM 2012 Comprehensive Drug List PLEASE READ: THIS DOCUMENT CONTAINS DrugList Blue MedicareRx (PDP)SM 2012 Formulary (List of Covered Drugs) DrugList PLEASE READ. Blue MedicareRx (PDP) is a stand-alone prescription drug plan with a Medicare contract offered by HCSC

Oklahoma, University of

462

Oil and gas field code master list 1997  

SciTech Connect (OSTI)

The Oil and Gas Field Code Master List 1997 is the sixteenth annual listing of all identified oil and gas fields in the US. It is updated with field information collected through October 1997. The purpose of this publication is to provide unique, standardized codes for identification of domestic fields. Use of these field codes fosters consistency of field identification by government and industry. As a result of their widespread adoption they have in effect become a national standard. The use of field names and codes listed in this publication is required on survey forms and other reports regarding field-specific data collected by EIA. There are 58,366 field records in this year`s FCML, 437 more than last year. The FCML includes: field records for each State and county in which a field resides; field records for each offshore area block in the Gulf of Mexico in which a field resides; field records for each alias field name (definition of alias is listed); fields crossing State boundaries that may be assigned different names by the respective State naming authorities. This report also contains an Invalid Field Record List of 4 records that have been removed from the FCML since last year`s report. These records were found to be either technically incorrect or to represent field names which were never recognized by State naming authorities.

NONE

1998-02-01T23:59:59.000Z

463

We have only listed Oklahoma Hatcheries as they appear in the National Poultry Improvement Plan. For a listing of hatcheries in your state, contact your state USDA  

E-Print Network [OSTI]

We have only listed Oklahoma Hatcheries as they appear in the National Poultry Improvement Plan-55-040 National Poultry Improvement Plan. A hatchery appearing on this list in no way constitutes endorsement

Balasundaram, Balabhaskar "Baski"

464

Oil and Gas Field Code Master List 1990  

SciTech Connect (OSTI)

This is the ninth annual edition of the Energy Information Administration's (EIA) Oil and Gas Field Code Master List. It reflects data collected through October 1990 and provides standardized field name spellings and codes for all identified oil and/or gas fields in the United States. There are 54,963 field records in this year's Oil and Gas Field Code Master List (FCML). This amounts to 467 more than in last year's report. As it is maintained by EIA, the Master List includes: Field records for each state and county in which a field resides; field records for each offshore area block in the Gulf of Mexico in which a field resides;field records for each alias field name; fields crossing state boundaries that may be assigned different names by the respective state naming authorities.

Not Available

1991-01-04T23:59:59.000Z

465

List of Texas Fuel Mitigation Vendors This list of fuel mitigation vendors that offer services in Texas is divided into two groups  

E-Print Network [OSTI]

List of Texas Fuel Mitigation Vendors This list of fuel mitigation vendors that offer services as a service to communities and landowners seeking assistance with fuel mitigation practices on their land Service Area Mu, Be, CP, Sc, Mo, FB Page 1 of 4Last updated on 10/16/2013 #12;List of Fuel Mitigation

Behmer, Spencer T.

466

Oil and gas field code master list 1994  

SciTech Connect (OSTI)

This is the thirteenth annual edition of the Energy Information Administration`s (EIA) Oil and Gas Field Code Master List. It reflects data collected through October 1994 and provides standardized field name spellings and codes for all identified oil and/or gas fields in the United States. The master field name spellings and codes are to be used by respondents when filing the following Department of Energy (DOE) forms: Form EIA-23, {open_quotes}Annual Survey of Domestic Oil and Gas Reserves,{close_quotes} filed by oil and gas well operators (field codes are required from larger operators only); Forms FERC 8 and EIA-191, {open_quotes}Underground Gas Storage Report,{close_quotes} filed by natural gas producers and distributors who operate underground natural gas storage facilities. Other Federal and State government agencies, as well as industry, use the EIA Oil and Gas Field Code Master List as the standard for field identification. A machine-readable version of the Oil and Gas Field Code Master List is available from the National Technical Information Service, 5285 Port Royal Road, Springfield, Virginia 22161, (703) 487-4650. In order for the Master List to be useful, it must be accurate and remain current. To accomplish this, EIA constantly reviews and revises this list. The EIA welcomes all comments, corrections, and additions to the Master List. All such information should be given to the EIA Field Code Coordinator at (214) 953-1858. EIA gratefully acknowledges the assistance provides by numerous State organizations and trade associations in verifying the existence of fields and their official nomenclature.

Not Available

1995-01-01T23:59:59.000Z

467

DOE technical standards list: Department of Energy standards index  

SciTech Connect (OSTI)

This technical standards list (TSL) was prepared for use by personnel involved in the selection and use of US DOE technical standards and other government and non-government standards. This TSL provides listings of current DOE technical standards, non-government standards that have been adopted by DOE, other government documents in which DOE has a recorded interest, and cancelled DOE technical standards. Standards are indexed by type in the appendices to this document. Definitions of and general guidance for the use of standards are also provided.

NONE

1997-06-01T23:59:59.000Z

468

List of Solar Energy Incentives | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place:KeystoneSolarList ofPassive SolarRoofs IncentivesList of

469

List of Solar Pool Heating Incentives | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place:KeystoneSolarList ofPassive SolarRoofs IncentivesList

470

List of Solar Space Heat Incentives | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place:KeystoneSolarList ofPassive SolarRoofs IncentivesListHeat

471

List of Wave Energy Incentives | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place:KeystoneSolarList ofPassiveMachine Controls IncentivesList

472

List of utility company aliases | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place:KeystoneSolarList ofPassiveMachine ControlsWindowsList of

473

Listing of Defense Nuclear Facilities | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office0-72.pdfGeorgeDoesn't Happen toLeveragingLindsey Geisler About UsListListing of

474

Attendance List from 12/05/08 | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustionImprovement3--Logistical5/08 Attendance List from 12/05/08 Attendance List from 12/05/08 More

475

MATLAB PRIMER This chapter will serve as a hands-on tutorial for beginners who are unfa-  

E-Print Network [OSTI]

Chapter 1 MATLAB PRIMER This chapter will serve as a hands-on tutorial for beginners who are unfa- miliar with MATLAB. We assume that readers have either the student edi- tion or a full version of MATLAB.1 Before reading this chapter, the reader should set up MATLAB on the computer, open the command

deYoung, Brad

476

Archway Education Professional The University of Georgia is seeking a qualified candidate to serve as the Archway Education Professional in  

E-Print Network [OSTI]

Archway Education Professional The University of Georgia is seeking a qualified candidate to serve as the Archway Education Professional in Dalton-Whitfield County, Georgia. The Archway Partnership was initiated with the University of Georgia. The Archway Education Professional is a UGA Public Service (Public Service Assistant

Arnold, Jonathan

477

Head-Loss Calculations Question: Gudwanwadi, of population 400, is to be served by a piped water  

E-Print Network [OSTI]

Head-Loss Calculations Question: Gudwanwadi, of population 400, is to be served by a piped water away from a tank which is about 20m above Gudwanwadi. The supply comes in a pipe with cross-section 20 sq.cm. The head-loss in this pipe is roughly 2m per km. per meter/sec of velocity of water through

Sohoni, Milind

478

37th Telecommunications Policy Research Conference, Sept. 2009 The Business Case of a Nationwide Wireless Network that Serves both Public  

E-Print Network [OSTI]

of public safety. In 2007, the U.S. Federal Communications Commission tried to establish a public-private partnership whereby a commercial partner would commit to serving public safety agencies in return for access agencies would be left out of such a nationwide network. Additionally, we find that urban areas opting

Peha, Jon M.

479

Health Serv Outcomes Res Method (2004) 5: 207226 DOI 10.1007/s10742-006-6829-9  

E-Print Network [OSTI]

Health Serv Outcomes Res Method (2004) 5: 207­226 DOI 10.1007/s10742-006-6829-9 Methodology in meta-analysis: a study from Critical Care meta-analytic practice John L. Moran, MBBS, FRACP · Patricia J. Solomon, Ph Springer Science + Business Media, LLC 2006 Abstract Methodological aspects of meta-analytic practice

Solomon, Patty

480

The investment made in serving at-risk children and youth by a national sample of recreation and park agencies  

E-Print Network [OSTI]

. The objectives of this thesis were to: (1) identify the definitions of at-risk children and youth that are most prevalent in the recreation and parks field; (2) establish baseline data which reports the efforts being made by agencies to serve at-risk children...

Espericueta, Lorina

1995-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "list serve leds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Abstract The Tat protein-export system serves to trans-locate folded proteins, often containing redox cofactors,  

E-Print Network [OSTI]

- location by the Sec system proceeds by a `threading' mechanism in which the essentially unfolded substrate-bound respiratory complexes by the Tat protein-transport system Received: 27 February 2002 / Revised: 16 April 2002Abstract The Tat protein-export system serves to trans- locate folded proteins, often containing

Palmer, Tracy

482

Vietnam Vet Runs to Raise Money for USCBL Mike Felker served as a medic with the First Marine Division in  

E-Print Network [OSTI]

June 2008 Vietnam Vet Runs to Raise Money for USCBL Mike Felker served as a medic with the First money for the U.S. Campaign to Ban Landmines. Participating in the Philadelphia Vietnam Veterans #12;Over 100 students gathered at Zot Restaurant in dowtown Philadelphia to raise money for demining

Plotkin, Joshua B.

483

Microscopic, electrical and optical studies on InGaN/GaN quantum wells based LED devices  

SciTech Connect (OSTI)

We report here on the micro structural, electronic and optical properties of a GaN-based InGaN/GaN MQW LED grown by the MOVPE method. The present study shows that the threading dislocations present in these LED structures are terminated as V pits at the surface and have an impact on the electrical and optical activity of these devices. It has been pointed that these dislocations were of edge, screw and mixed types. EBIC maps suggest that the electrically active defects are screw and mixed dislocations and behave as nonradiative recombinant centres.

Mutta, Geeta Rani; Venturi, Giulia; Castaldini, Antonio; Cavallini, Anna [Department of Physics and Astronomy, University of Bologna, Viale Carlo Berti Pichat 6/II, 40127 Bologna (Italy); Meneghini, Matteo; Zanoni, Enrico; Meneghesso, Gaudenzio [University of Padova, Department of Information Engineering, via Gradenigo 6/B, Padova 35131 (Italy); Zhu, Dandan; Humphreys, Colin [Department of Materials Science and Metallurgy, University of Cambridge, Pembroke Street, Cambridge, CB2 3QZ (United Kingdom)

2014-02-21T23:59:59.000Z

484

Argonne is a partner in the Argonne-Northwestern Solar Energy Research Center led by Northwestern University. Argonne is a partner in the Center for Emergent Superconductivity led by Brookhaven National Laboratory.  

E-Print Network [OSTI]

Argonne is a partner in the Argonne-Northwestern Solar Energy Research Center led by Northwestern Conductivity (CES) W. Kwok (MSD) Argonne-Northwestern Solar Energy Research (ANSER) M. Pellin (MSD) #12; Administrative Support J. Hogan and G. Cutinello Chemical Sciences & Engineering (CSE) E.E. Bunel High Energy

Kemner, Ken

485

Demonstration Assessment of LED Roadway Lighting: NE Cully Boulevard Portland, OR  

SciTech Connect (OSTI)

A new roadway lighting demonstration project was initiated in late 2010, which was planned in conjunction with other upgrades to NE Cully Boulevard, a residential collector road in the northeast area of Portland, OR. With the NE Cully Boulevard project, the Portland Bureau of Transportation hoped to demonstrate different light source technologies and different luminaires side-by-side. This report documents the initial performance of six different newly installed luminaires, including three LED products, one induction product, one ceramic metal halide product, and one high-pressure sodium (HPS) product that represented the baseline solution. It includes reported, calculated, and measured performance; evaluates the economic feasibility of each of the alternative luminaires; and documents user feedback collected from a group of local Illuminating Engineering Society (IES) members that toured the site. This report does not contain any long-term performance evaluations or laboratory measurements of luminaire performance. Although not all of the installed products performed equally, the alternative luminaires generally offered higher efficacy, more appropriate luminous intensity distributions, and favorable color quality when compared to the baseline HPS luminaire. However, some products did not provide sufficient illumination to all areas—vehicular drive lanes, bicycle lanes, and sidewalks—or would likely fail to meet design criteria over the life of the installation due to expected depreciation in lumen output. While the overall performance of the alternative luminaires was generally better than the baseline HPS luminaire, cost remains a significant barrier to widespread adoption. Based on the cost of the small quantity of luminaires purchased for this demonstration, the shortest calculated payback period for one of the alternative luminaire types was 17.3 years. The luminaire prices were notably higher than typical prices for currently available luminaires purchased in larger quantities. At prices that are more typical, the payback would be less than 10 years. In addition to the demonstration luminaires, a networked control system was installed for additional evaluation and demonstration purposes. The capability of control system to measure luminaire input power was explored in this study. A more exhaustive demonstration and evaluation of the control system will be the subject of future GATEWAY report(s).

Royer, Michael P.; Poplawski, Michael E.; Tuenge, Jason R.

2012-06-29T23:59:59.000Z

486

California's Renewables Portfolio Standard (RPS) List of Facilities Certification Status  

E-Print Network [OSTI]

California's Renewables Portfolio Standard (RPS) List of Facilities Certification Status Terms Facility State Facility County Commercial Operations Date Nameplate Capacity Technology Eligibility Date-Certification High Desert Solar One - HDSO Victorville CA San Bernardino 1/1/2007 101 Solar Thermal Electric 8

487

Solving the Linear Equation in Reservoir Simulation List of authors  

E-Print Network [OSTI]

analogous to those techniques, but ensures that material balance is preserved exactly within each planeSolving the Linear Equation in Reservoir Simulation List of authors: Julien Maes 1 Reservoir, so that solving the linear equations arising in Newtons step is more and more challenging. Simulators

Boyer, Edmond

488

New block preconditioners for saddle point problems List of authors  

E-Print Network [OSTI]

New block preconditioners for saddle point problems List of authors: Michele Benzi 1 In this talk I will describe a class of block preconditioners for linear systems in saddle point form. The main focus with respect to problem parameters will be discussed, together with the effect of inexact solves. This is joint

Boyer, Edmond

489

Accounts Payable Vendor Distribution List Accounts Payable Fax #: 8606793949  

E-Print Network [OSTI]

Accounts Payable Vendor Distribution List Accounts Payable Fax #: 8606793949 Jane Ann Daversa Center · Computer Hardware, Software, Printers and Supply Vendors · GovConnection · GE (All Divisions Vendors · Smith and Nephew (All Divisions) · Stryker (All Divisions) · Synthes · UCONN COOP · Others

Oliver, Douglas L.

490

ACADEMIC INTEGRITY LIST OF ON-LINE RESOURCES  

E-Print Network [OSTI]

ACADEMIC INTEGRITY LIST OF ON-LINE RESOURCES Indiana University: How to Recognize Plagiarism http-making flowchart, and examples, as well as a 5-minute quiz on plagiarism. Georgetown University: What, with many real-life examples of situations that students face. American University: Academic Integrity http://www.american.edu/academics/integrity

Mease, Kenneth D.

491

Verifying Program Optimizations in Agda Case Study: List Deforestation  

E-Print Network [OSTI]

Verifying Program Optimizations in Agda Case Study: List Deforestation Andreas Abel 3 July 2012 of deforestation. As a result we show that the summation of the first n natural numbers, implemented by producing structures is called deforestation, since data structures are tree-shaped in the general case. In our case

Abel, Andreas

492

Verifying Program Optimizations in Agda Case Study: List Deforestation  

E-Print Network [OSTI]

Verifying Program Optimizations in Agda Case Study: List Deforestation Andreas Abel 16 July 2009 of deforestation. As a result we show that the summation of the rst n natural numbers, implemented by producing structures is called deforestation, since data structures are tree-shaped in the general case. In our case

Abel, Andreas

493

SPORTS CENTRE PRICE LIST 2010/11 Member Bookings  

E-Print Network [OSTI]

SPORTS CENTRE PRICE LIST 2010/11 Member Bookings Badminton, 1 court 4.00 Main Hall; Daily non term 1 court 5-aside etc 15.00* Main Hall; Term block bookings 1 court; 5-aside etc. 150 (two weeks free) Ancillary Hall/ Studio p.h. 12.50 Squash Court 3.00 Telephone Booking Scheme 25.00 Fitness Programmes

O'Mahony, Donal E.

494

SPORTS CENTRE PRICE LIST 2012/13 Member Bookings  

E-Print Network [OSTI]

SPORTS CENTRE PRICE LIST 2012/13 Member Bookings Badminton, 1 court 4.00* Main Hall; Daily non term 1 court 5-aside etc 15.00* Main Hall; Term block bookings 1 court; 5-aside etc. 150 (two weeks free) Ancillary Hall/ Studio p.h. 12.50 Squash Court 3.00* Tennis Court 4.00* Fitness Programmes

O'Mahony, Donal E.

495

SAMPLING METHODS: A LIST OF SOURCES M.1 Introduction  

E-Print Network [OSTI]

for sampling methods are available through online literature databases; Federal, State, and university libraries; the internet; and other sources. M.2 List of Sources Department of Energy (DOE). 1987, Safety, and Health, Office of Environmental Audit, Washington, D.C. ! General Description of Document

496

Plutonium finishing plant safety systems and equipment list  

SciTech Connect (OSTI)

The Safety Equipment List (SEL) supports Analysis Report (FSAR), WHC-SD-CP-SAR-021 and the Plutonium Finishing Plant Operational Safety Requirements (OSRs), WHC-SD-CP-OSR-010. The SEL is a breakdown and classification of all Safety Class 1, 2, and 3 equipment, components, or system at the Plutonium Finishing Plant complex.

Bergquist, G.G.

1995-01-06T23:59:59.000Z

497

Spring Semester 2006 Course Listings Index Architecture & Planning 2  

E-Print Network [OSTI]

IN ARCHITECTURE OR ENVIRONMENTAL DESIGN COURSES MAY BE LIMITED TO STUDENTS WITHIN THE COLLEGE ONLY, UNLESSSpring Semester 2006 Course Listings Index Architecture & Planning 2 Arts & Sciences 4 Business 54# Ca Time/Days Building/Roo College of Architecture and Planning edits seTitle ll# m Instructor Max

Mojzsis, Stephen J.

498

Spring Semester 2005 Course Listings Index Architecture & Planning...........................2  

E-Print Network [OSTI]

for eligibility 2 College of Architecture and Planning Environmental Design 168 (303-492-7711) ENROLLMENT IN ARCHITECTURE OR ENVIRONMENTAL DESIGN COURSES MAY BE LIMITED TO STUDENTS WITHIN THE COLLEGE ONLY, UNLESS1 Spring Semester 2005 Course Listings Index Architecture & Planning...........................2

Mojzsis, Stephen J.

499

FALL 2007 COURSE LISTING INDEX College / Department Page  

E-Print Network [OSTI]

of Architecture and Planning Environmental Design 168 (303-492-7711) ENROLLMENT IN ARCHITECTURE OR ENVIRONMENTALFALL 2007 COURSE LISTING INDEX College / Department Page Architecture & Planning 2 Arts & Sciences ARE SUBJECT TO CANCELLATION IF ENROLLMENTS ARE INSUFFICIENT. Architecture IT IS THE STUDENT'S RESPONSIBILITY

Mojzsis, Stephen J.

500

Fall Semester 2006 Course Listings Index Architecture & Planning 2  

E-Print Network [OSTI]

IN ARCHITECTURE OR ENVIRONMENTAL DESIGN COURSES MAY BE LIMITED TO STUDENTS WITHIN THE COLLEGE ONLY, UNLESSFall Semester 2006 Course Listings Index Architecture & Planning 2 Arts & Sciences 4 Business 55/Roo College of Architecture and Planning edits seTitle ll# m Instructor MaxEnrollment Course# edits seTitle ll

Mojzsis, Stephen J.