Powered by Deep Web Technologies
Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Method for improving separation of carbohydrates from wood pulping and wood or biomass hydrolysis liquors  

DOE Patents [OSTI]

A method for separating carbohydrates from pulping liquors includes the steps of providing a wood pulping or wood or biomass hydrolysis pulping liquor having lignin therein, and mixing the liquor with an acid or a gas which forms an acid upon contact with water to initiate precipitation of carbohydrate to begin formation of a precipitate. During precipitation, at least one long chain carboxylated carbohydrate and at least one cationic polymer, such as a polyamine or polyimine are added, wherein the precipitate aggregates into larger precipitate structures. Carbohydrate gel precipitates are then selectively removed from the larger precipitate structures. The method process yields both a carbohydrate precipitate and a high purity lignin.

Griffith, William Louis; Compere, Alicia Lucille; Leitten Jr., Carl Frederick

2010-04-20T23:59:59.000Z

2

Conversion of a black liquor recovery boiler to wood firing: A case history  

SciTech Connect (OSTI)

In 1983 a large integrated pulp and paper mill in southeastern United States retired an older chemical recovery boiler when it was replaced by a newer and larger unit as part of a mill expansion. At that time the mill was generating steam and power using wood waste, natural gas and black liquor, a common fuel mix for pulp mills. The retirement of the recovery boiler presented an opportunity for the mill and corporate engineering to evaluate various mixes of fuels for the mill.

Eleniewski, M.A. [Detroit Stoker Company, Monroe, MI (United States)

1994-12-31T23:59:59.000Z

3

Generating power with waste wood  

SciTech Connect (OSTI)

Among the biomass renewables, waste wood has great potential with environmental and economic benefits highlighting its resume. The topics of this article include alternate waste wood fuel streams; combustion benefits; waste wood comparisons; waste wood ash; pilot scale tests; full-scale test data; permitting difficulties; and future needs.

Atkins, R.S.

1995-02-01T23:59:59.000Z

4

Using waste wood as fuel saves $2000 per day  

SciTech Connect (OSTI)

Sawdust and wood residue replaced natural gas or number 2 fuel oil to fire 2 kilns at the Cherokee Brick Co. in Raleigh, NC, resulting in savings of $2000/day. Exhaust air from the kilns was sent directly back to a rotating dryer to dry the waste wood. The dried wood containing 8 to 12% moisture was supplied, around the clock, at a rate of 140 ton/day of dry material. (BLM)

Ragland, W. (Cherokee Brick Co., Raleigh, NC); Byrnes, D.

1981-11-01T23:59:59.000Z

5

Kilowatts From Waste Wood In The Furniture Industry  

E-Print Network [OSTI]

recently, the Singer Furniture Co., Lenoir, N. Carolina, purchased a 450 kilowatt steam turbine/induction generator set to use extra steam - produced by 'free' waste wood fuel - in generating 15% of the plant's electrical energy demand. The turbine...

Nailen, R. L.

1981-01-01T23:59:59.000Z

6

Wood furnance cuts fuel bills and wastes  

SciTech Connect (OSTI)

The use of a wood burning furnace instead of propane to heat the Saddlecraft manufacturing plant in Cherokee, North Carolina, is described. A chart shows gallons of propane usage in winter for five years. (MHR)

Not Available

1982-01-01T23:59:59.000Z

7

Use of Wood Waste in Rehabilitation of Landings Constructed on Fine-Textured  

E-Print Network [OSTI]

Use of Wood Waste in Rehabilitation of Landings Constructed on Fine-Textured Soils, Central rehabilitated with three operationally feasible treatments: (1) incorpora- tion of waste wood chips (140 t of chipped wood wastes, with appropriate supplementary N fertilization, in rehabilitation of access

Sanborn, Paul

8

Presentation 2.6: Wood waste for energy: lessons learnt from tropical regions Paul Vantomme  

E-Print Network [OSTI]

of forest products with more value adding, and promoting the use of wood waste to increase energy efficiency tropical timber trade · almost 80% of the world's tropical forests ITTO ­ Wood Waste for Energy Working and forest industries GhanaDevelopment of energy alternatives for the efficient utilization of wood

9

Constraining uncertainties about the sources and magnitude of ambient air exposures to polycyclic aromatic hydrocarbons (PAHs): The state of Minnesota as a case study  

E-Print Network [OSTI]

wood, wood waste, and black liquor are reported by thee other= wood waste, black liquor, used oil, petroleum coke,

Lobscheid, Agnes B.; McKone, Thomas E.

2004-01-01T23:59:59.000Z

10

Thermal processing of black liquor from alkaline straw pulping  

SciTech Connect (OSTI)

Black liquor is the wastewater from the cooking of wood or straw in the production of pulp and paper. Nowadays new processes are being investigated as alternatives to the traditional recovery boiler used for black liquor treatment. One of the processes which appears to be more promising is gasification, for which further research is needed for its full industrial implementation. There is not much data about the behavior of soda black liquors from straw cooking in the literature. Therefore the thermal decomposition of one of these liquors has been studied in a thermobalance, in inert (N{sub 2}) atmosphere. The kinetic constants from isothermal experiments have been obtained.

Sanchez, J.L.; Garcia, L.; Gea, G.; Bilbao, R.; Arauzo, J. [Univ. of Zaragoza (Spain)

1996-12-31T23:59:59.000Z

11

Waste Growth Challenges Local Democracy. The Politics of Waste between Europe and the Mediterranean: a Focus on Italy  

E-Print Network [OSTI]

capita); hydro (20%), black liquor, 6 peat, coal, wood fuel,to-door systems, but Black liquor is a byproduct of pulp,

Mengozzi, Alessandro

2010-01-01T23:59:59.000Z

12

Black liquor gasifier/gas turbine cogeneration  

SciTech Connect (OSTI)

The kraft process dominates pulp and paper production worldwide. Black liquor, a mixture of lignin and inorganic chemicals, is generated in this process as fiber is extracted from wood. At most kraft mills today, black liquor is burned in Tomlinson boilers to produce steam for on-site heat and power and to recover the inorganic chemicals for reuse in the process. Globally, the black liquor generation rate is about 85,000 MW{sub fuel} (or 0.5 million tonnes of dry solids per day), with nearly 50% of this in North America. The majority of presently installed Tomlinson boilers will reach the end of their useful lives during the next 5 to 20 years. As a replacement for Tomlinson-based cogeneration, black liquor-gasifier/gas turbine cogeneration promises higher electrical efficiency, with prospective environmental, safety, and capital cost benefits for kraft mills. Several companies are pursuing commercialization of black liquor gasification for gas turbine applications. This paper presents results of detailed performance modeling of gasifier/gas turbine cogeneration systems using different black liquor gasifiers modeled on proposed commercial designs.

Consonni, S. [Politecnico di Milano (Italy). Dept. di Energetica; Larson, E.D.; Keutz, T.G. [Princeton Univ., NJ (United States); Berglin, N. [Chalmers Univ. of Technology, Goteborg (Sweden). Dept. of Heat and Power Technology

1998-07-01T23:59:59.000Z

13

An evaluation of atmospheric evaporation for treating wood preserving wastes  

E-Print Network [OSTI]

i. hat a constant rate of total organi carbon and chemical oxygen demand removal occurred as the wastewai. r was evaporated. A procedure for designing atmospheric evaporation ponds was developed and applied to a hypothetical wood preserving plant.... From this example design estimates of equivalent hydrocarbon concentrations in the air downwind of the pond are made. Various other design con- siderations such as the input data, modifications to the design pro- cedure, solids accumulation...

Shack, Pete A

1976-01-01T23:59:59.000Z

14

The treatment of wood preserving wastes with activated carbon  

E-Print Network [OSTI]

requirement and treatment schemes should be based on these combined requirements. Current treatment schemes employed in the wood preserving industry combine physical, chemical, and biological processes and operations in treating wastewaters. Jones, et al...-five of the plants performed secondary treatment on-site of which 32 used biological methods. Only 6 per- cent discharged their wastewaters directly to the environment without any form of treatment and approximately 40 percent of the plants planned to change...

Pence, Robert Fuller

1978-01-01T23:59:59.000Z

15

Kraft Liquor Corrosion Margaret Gorog  

E-Print Network [OSTI]

1 Kraft Liquor Corrosion Margaret Gorog Federal Way, WA Pulp and Paper Corrosion Symposium Georgia Tech Renewable Bioproducts Institute November 2014 · Brown Stock Corrosion · Alkaline Liquor Corrosion · Black Liquor Corrosion ­ Evaporators ­ Research · High Solids Black Liquor Corrosion of Stainless Steel

Das, Suman

16

CCA-Treated wood disposed in landfills and life-cycle trade-offs with waste-to-energy and MSW landfill disposal  

E-Print Network [OSTI]

CCA-Treated wood disposed in landfills and life-cycle trade-offs with waste-to-energy and MSW in waste-to-energy (WTE) facilities. In other countries, the predominant disposal option for wood, others have not, and the product continues to enter the waste stream from construction, demolition

Florida, University of

17

Isolation of levoglucosan from lignocellulosic pyrolysis oil derived from wood or waste newsprint  

DOE Patents [OSTI]

A method is provided for preparing high purity levoglucosan from lignocellulosic pyrolysis oils derived from wood or waste newsprint. The method includes reducing wood or newsprint to fine particle sizes, treating the particles with a hot mineral acid for a predetermined period of time, and filtering off and drying resulting solid wood or newsprint material; pyrolyzing the dried solid wood or newsprint material at temperatures between about 350 and 375 C to produce pyrolysis oils; treating the oils to liquid-liquid extraction with methyl isobutyl ketone to remove heavy tar materials from the oils, and to provide an aqueous fraction mixture of the oils containing primarily levoglucosan; treating the aqueous fraction mixtures with a basic metal salt in an amount sufficient to elevate pH values to a range of about 12 to about 12.5 and adding an amount of the salt in excess of the amount needed to obtain the pH range to remove colored materials of impurities from the oil and form a slurry, and freeze-drying the resulting slurry to produce a dry solid residue; and extracting the levoglucosan from the residue using ethyl acetate solvent to produce a purified crystalline levoglucosan. 2 figs.

Moens, L.

1995-07-11T23:59:59.000Z

18

Isolation of levoglucosan from lignocellulosic pyrolysis oil derived from wood or waste newsprint  

DOE Patents [OSTI]

A method is provided for preparing high purity levoglucosan from lignocellulosic pyrolysis oils derived from wood or waste newsprint. The method includes reducing wood or newsprint to fine particle sizes, treating the particles with a hot mineral acid for a predetermined period of time, and filtering off and drying resulting solid wood or newsprint material; pyrolyzing the dried solid wood or newsprint material at temperatures between about 350.degree. and 375.degree. C. to produce pyrolysis oils; treating the oils to liquid-liquid extraction with methyl isobutyl ketone to remove heavy tar materials from the oils, and to provide an aqueous fraction mixture of the oils containing primarily levoglucosan; treating the aqueous fraction mixtures with a basic metal salt in an amount sufficient to elevate pH values to a range of about 12 to about 12.5 and adding an amount of the salt in excess of the amount needed to obtain the pH range to remove colored materials of impurities from the oil and form a slurry, and freeze-drying the resulting slurry to produce a dry solid residue; and extracting the levoglucosan from the residue using ethyl acetate solvent to produce a purified crystalline levoglucosan.

Moens, Luc (Lakewood, CO)

1995-01-01T23:59:59.000Z

19

Kraft black liquor combustion: Advancement in fundamental understanding  

SciTech Connect (OSTI)

Self-generated fuel streams plus purchased fossil fuel and power supply the pulp and paper industry with its energy requirements. The total industry energy use for 1986 was approximately 2.3 Quad (2300 trillion Btus). Self-generated and residue fuels accounted for 57% of the energy requirements. Spent pulping liquors provide the single largest self-generated energy source, approximately one Quad (900 trillion Btus). The pulp and paper industry also leads the nation in cogeneration performance. In 1986 eighty-nine percent (89%) of the 46 billion KWHs generated were produced by cogeneration. Spent pulping liquors supply the single largest fuel source (35%) to these cogeneration facilities. Spent pulping liquors consist of solubilized wood organics, spent inorganic chemicals, and water. Since kraft pulp dominates the North American market, 74%, kraft black liquor is the dominant spent pulping liquor. Effective recovery of high level energy and chemicals from black liquor contributes heavily toward dominance of kraft pulping. The kraft chemical recovery cycle centers around the recovery boiler. Kraft recovery boilers have been commercially available for over 50 years. The potential still exists, however, for significant improvements in energy recovery and black liquor throughput. Potential energy benefits from black liquor combustion research amount to 30 trillion Btus. Energy recovery increases often are an additional benefit from modifications made to increase black liquor throughput. Capacity increases of at least 5% are often achievable. Increased energy productivity of the kraft chemical recovery boiler will come by incorporation of improved fundamental knowledge into the technology used for boiler upgrades and new boiler construction. 5 refs., 9 figs.

Clay, D.T.

1987-10-01T23:59:59.000Z

20

Gasification of black liquor  

SciTech Connect (OSTI)

A process is described for treating a concentrated aqueous black liquor carbonaceous material and alkali metal sulfur compounds to form a combustible gas and a sulfide-rich melt comprising: (a) providing a gasifier vessel maintained at a pressure of from about 1 to 50 atmospheres and containing a relatively shallow molten salt pool at its bottom within a sump equipped with an overflow discharge; (b) introducing into the top of the drying zone the concentrated aqueous black liquor containing carbonaceous material and alkali metal sulfur compounds; (c) evaporating water from the concentrated aqueous black liquor in the drying zone by direct contact of the aqueous black liquor with the hot gas rising from the gasification zone to produce dried black liquor solids; (d) introducing a first portion of an oxygen-containing gas into the gas space in the gasification zone located below the drying zone immediately above the molten salt pool to partially oxidize and gasify a fraction of the carbonaceous material in the dried black liquor solids falling through the zone to form a hot combustible gas; (e) introducing a second portion of the oxygen-containing gas beneath the surface of the molten salt pool in an amount sufficient to cause gasification of essentially all carbonaceous material entering the pool from the gasification zone but not sufficient to create oxidizing conditions in the pool; (f) withdrawing the cooled combustible gas having a higher heating value of at least about 90 Btu/scf (dry basis) from an upper portion of the drying zone; and (g) withdrawing from the overflow discharge in the molten salt reduction zone a melt in which the sulfur content is predominantly in the form of alkali metal sulfide.

Kohl, A.L.

1987-07-28T23:59:59.000Z

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Gasification of black liquor  

DOE Patents [OSTI]

A concentrated aqueous black liquor containing carbonaceous material and alkali metal sulfur compounds is treated in a gasifier vessel containing a relatively shallow molten salt pool at its bottom to form a combustible gas and a sulfide-rich melt. The gasifier vessel, which is preferably pressurized, has a black liquor drying zone at its upper part, a black liquor solids gasification zone located below the drying zone, and a molten salt sulfur reduction zone which comprises the molten salt pool. A first portion of an oxygen-containing gas is introduced into the gas space in the gasification zone immediatley above the molten salt pool. The remainder of the oxygen-containing gas is introduced into the molten salt pool in an amount sufficient to cause gasification of carbonaceous material entering the pool from the gasification zone but not sufficient to create oxidizing conditions in the pool. The total amount of the oxygen-containing gas introduced both above the pool and into the pool constitutes between 25 and 55% of the amount required for complete combustion of the black liquor feed. A combustible gas is withdrawn from an upper portion of the drying zone, and a melt in which the sulfur content is predominantly in the form of alkali metal sulfide is withdrawn from the molten salt sulfur reduction zone.

Kohl, Arthur L. (Woodland Hills, CA)

1987-07-28T23:59:59.000Z

22

Gasification of black liquor  

DOE Patents [OSTI]

A concentrated aqueous black liquor containing carbonaceous material and alkali metal sulfur compounds is treated in a gasifier vessel containing a relatively shallow molten salt pool at its bottom to form a combustible gas and a sulfide-rich melt. The gasifier vessel, which is preferably pressurized, has a black liquor drying zone at its upper part, a black liquor solids gasification zone located below the drying zone, and a molten salt sulfur reduction zone which comprises the molten salt pool. A first portion of an oxygen-containing gas is introduced into the gas space in the gasification zone immediately above the molten salt pool. The remainder of the oxygen-containing gas is introduced into the molten salt pool in an amount sufficient to cause gasification of carbonaceous material entering the pool from the gasification zone but not sufficient to create oxidizing conditions in the pool. The total amount of the oxygen-containing gas introduced both above the pool and into the pool constitutes between 25 and 55% of the amount required for complete combustion of the black liquor feed. A combustible gas is withdrawn from an upper portion of the drying zone, and a melt in which the sulfur content is predominantly in the form of alkali metal sulfide is withdrawn from the molten salt sulfur reduction zone. 2 figs.

Kohl, A.L.

1987-07-28T23:59:59.000Z

23

Combustion of black liquor  

SciTech Connect (OSTI)

This patent describes an improvement in the combustion of black liquor in an existing Tomlison recovery boiler unit in which black liquor is sprayed into a furnace in which it is successively dried, pyrolyzed and converted to a bed of solid carbonaceous residue, using a primary air stream and a secondary air stream and the residue is subsequently converted to a smelt. The improvement comprises: the addition of between an effective amount up to 5% oxygen by volume to the primary air stream directed at the bed of solid carbonaceous residue, the amount of oxygen added being sufficient to increase the adiabatic flame temperature, the combustion rate of the solid carbonaceous material, the rate of pyrolysis, the temperature in the lower portion of the furnace, the the drying rate of black liquor droplets, and to decrease the temperature of the gases entering the heat transfer surfaces in the upper portion of the furnace and the rate of deposit formation on the surfaces and wherein the amount of black liquor combusted is increased as compared with the amount combusted in the same furnace operated without the addition of oxygen to the primary air.

Mullen, W.T.

1989-08-15T23:59:59.000Z

24

Evaluation of XRF and LIBS technologies for on-line sorting of CCA-treated wood waste  

E-Print Network [OSTI]

Evaluation of XRF and LIBS technologies for on-line sorting of CCA-treated wood waste Helena M technologies evaluated included X-ray fluorescence spectroscopy (XRF) and laser induced breakdown spectroscopy (LIBS). The XRF detector system utilized in this study was capable of rapidly detecting the presence

Florida, University of

25

Dover Textiles - A Case History on Retrofitting Factories with a Boiler System Fueled on Coal, Wood and Waste  

E-Print Network [OSTI]

The shortage of affordable gas and oil boiler fuels and the recent Iran/Iraq war underscores the urgent need for the American industrial system to convert to domestically controlled fuels and particularly coal, wood, and waste. More talk than action...

Pincelli, R. D.

1981-01-01T23:59:59.000Z

26

Energy considerations for steam plasma gasification of black liquor and chemical recovery  

SciTech Connect (OSTI)

This paper investigates the energy economics of using a hybrid steam plasma process to gasify black liquor. In the pulp and paper industry, gasification is gaining credibility as an incremental method to supplement the standard Kraft process, which bums the black liquor in large furnaces to recover energy and inorganic chemicals (sodium and sulfur) that are recycled back into the wood pulping process. This paper shows that despite the energy intensive nature of steam plasma processing, several fortuitous conditions arise that make it a viable technology for the gasification of black liquor.

Grandy, J.D.; Kong, P.C.

1995-10-01T23:59:59.000Z

27

Energy considerations for steam plasma gasification of black liquor and chemical recovery  

SciTech Connect (OSTI)

This paper investigates the energy economics of using a hybrid steam plasma process to gasify black liquor. In the pulp and paper industry, gasification is gaining credibility as an incremental method to supplement the standard Kraft process, which burns the black liquor in large furnaces to recover energy and inorganic chemicals (sodium and sulfur) that are recycled back into the wood pulping process. This paper shows that despite the energy intensive nature of steam plasma processing, several fortuitous conditions arise that make it a viable technology for the gasification of black liquor.

Grandy, J.D.; Kong, P.C. [Idaho National Engineering Lab., Idaho Falls, ID (United States)

1995-07-01T23:59:59.000Z

28

Exergy analysis of the Chartherm process for energy valorization and material recuperation of chromated copper arsenate (CCA) treated wood waste  

SciTech Connect (OSTI)

The Chartherm process (Thermya, Bordeaux, France) is a thermochemical conversion process to treat chromated copper arsenate (CCA) impregnated wood waste. The process aims at maximum energy valorization and material recuperation by combining the principles of low-temperature slow pyrolysis and distillation in a smart way. The main objective of the exergy analysis presented in this paper is to find the critical points in the Chartherm process where it is necessary to apply some measures in order to reduce exergy consumption and to make energy use more economic and efficient. It is found that the process efficiency can be increased with 2.3-4.2% by using the heat lost by the reactor, implementing a combined heat and power (CHP) system, or recuperating the waste heat from the exhaust gases to preheat the product gas. Furthermore, a comparison between the exergetic performances of a 'chartherisation' reactor and an idealized gasification reactor shows that both reactors destroy about the same amount of exergy (i.e. 3500 kW kg{sub wood}{sup -1}) during thermochemical conversion of CCA-treated wood. However, the Chartherm process possesses additional capabilities with respect to arsenic and tar treatment, as well as the extra benefit of recuperating materials.

Bosmans, A., E-mail: anouk.bosmans@mech.kuleuven.be [Department of Mechanical Engineering, Katholieke Universiteit Leuven, Celestijnenlaan 300A, 3001 Heverlee (Belgium); Auweele, M. Vanden; Govaerts, J.; Helsen, L. [Department of Mechanical Engineering, Katholieke Universiteit Leuven, Celestijnenlaan 300A, 3001 Heverlee (Belgium)

2011-04-15T23:59:59.000Z

29

Environmental assessment of the atlas bio-energy waste wood fluidized bed gasification power plant. Final report  

SciTech Connect (OSTI)

The Atlas Bio-Energy Corporation is proposing to develop and operate a 3 MW power plant in Brooklyn, New York that will produce electricity by gasification of waste wood and combustion of the produced low-Btu gas in a conventional package steam boiler coupled to a steam-electric generator. The objectives of this project were to assist Atlas in addressing the environmental permit requirements for the proposed power plant and to evaluate the environmental and economic impacts of the project compared to more conventional small power plants. The project`s goal was to help promote the commercialization of biomass gasification as an environmentally acceptable and economically attractive alternative to conventional wood combustion. The specific components of this research included: (1) Development of a permitting strategy plan; (2) Characterization of New York City waste wood; (3) Characterization of fluidized bed gasifier/boiler emissions; (4) Performance of an environmental impact analysis; (5) Preparation of an economic evaluation; and (6) Discussion of operational and maintenance concerns. The project is being performed in two phases. Phase I, which is the subject of this report, involves the environmental permitting and environmental/economic assessment of the project. Pending NYSERDA participation, Phase II will include development and implementation of a demonstration program to evaluate the environmental and economic impacts of the full-scale gasification project.

Holzman, M.I.

1995-08-01T23:59:59.000Z

30

Strategic Utilization of Paper/Wood Waste for Biodiesel Fuel Art J. Ragauskas, Institute of Paper Science and Technology; Georgia Institute of Technology, Atlanta, GA.  

E-Print Network [OSTI]

Strategic Utilization of Paper/Wood Waste for Biodiesel Fuel Art J. Ragauskas, Institute of Paper lignocellulosics to biodiesel fuel Feedstocks ABSTRACT This poster examines the potential of utilizing waste paper CelluloseHemicelluloseLigninResource Cracking and Refining of Polysaccharides Bio-Diesel Substitutes

31

Kraft black liquor delivery systems  

SciTech Connect (OSTI)

Improvement of spray nozzles for black liquor injection into kraft recovery furnaces is expected to result from obtaining a controlled, well-defined droplet size distribution. Work this year has centered on defining the capabilities of commercial black liquor nozzles currently in use. Considerations of the observed mechanism of droplet formation suggest a major revision is needed in the theory of how droplets form from these nozzles. High resolution, high sensitivity video has been shown to be superior to flash x-ray as a technique for measuring the droplet size distribution as well as the formation history. An environmentally sound spray facility capable of spraying black liquor at temperatures up to normal firing conditions is being constructed before data acquisition continues. Preliminary correlations have been developed between liquor properties, nozzle design, and droplet size. Three aspects of nozzle design have been investigated: droplet size distribution, fluid sheet thickness, and flow and pressure drop characteristics. The standard deviation about the median droplet size for black liquor is nearly the same as the for a wide variety of other fluids and nozzle types. Preliminary correlation for fluid sheet thickness on the plate of a splashplate nozzle show the strong similarities of black liquor to other fluids. The flow and pressure drop characteristic of black liquor nozzle, follow a simple two-term relationship similar to other flow devices. This means that in routine mill operation of black liquor nozzles only the fluid acceleration in the nozzle is important, viscous losses are quiet small. 21 refs., 53 figs., 10 tabs.

Adams, T.N.; Empie, H.L.; Obuskovic, N.; Spielbauer, T.M.

1990-02-01T23:59:59.000Z

32

Use of sulfide-containing liquors for removing mercury from flue gases  

DOE Patents [OSTI]

A method and apparatus for reducing and removing mercury in industrial gases, such as a flue gas, produced by the combustion of fossil fuels, such as coal, adds sulfide ions to the flue gas as it passes through a scrubber. Ideally, the source of these sulfide ions may include at least one of: sulfidic waste water, kraft caustic liquor, kraft carbonate liquor, potassium sulfide, sodium sulfide, and thioacetamide. The sulfide ion source is introduced into the scrubbing liquor as an aqueous sulfide species. The scrubber may be either a wet or dry scrubber for flue gas desulfurization systems.

Nolan, Paul S. (North Canton, OH); Downs, William (Alliance, OH); Bailey, Ralph T. (Uniontown, OH); Vecci, Stanley J. (Alliance, OH)

2003-01-01T23:59:59.000Z

33

Use of sulfide-containing liquors for removing mercury from flue gases  

DOE Patents [OSTI]

A method and apparatus for reducing and removing mercury in industrial gases, such as a flue gas, produced by the combustion of fossil fuels, such as coal, adds sulfide ions to the flue gas as it passes through a scrubber. Ideally, the source of these sulfide ions may include at least one of: sulfidic waste water, kraft caustic liquor, kraft carbonate liquor, potassium sulfide, sodium sulfide, and thioacetamide. The sulfide ion source is introduced into the scrubbing liquor as an aqueous sulfide species. The scrubber may be either a wet or dry scrubber for flue gas desulfurization systems.

Nolan, Paul S.; Downs, William; Bailey, Ralph T.; Vecci, Stanley J.

2006-05-02T23:59:59.000Z

34

Liquor Activity Reduction (LAR) Programme - 12397  

SciTech Connect (OSTI)

Waste material from the reprocessing of irradiated fuel has been stored under water for several decades leading to the water becoming highly radioactive. As a critical enabler to the decommissioning strategy for the Sellafield site, the Liquor Activity Reduction (LAR) programme has been established to provide a processing route for this highly radioactive liquor. This paper reviews the progress that has been made since the start of routine LAR transfer cycles (July 2010) and follows on from the earlier paper presented at WM2011. The paper focuses on the learning from the first full year of routine LAR transfer cycles and the application of this learning to the wider strategies for the treatment of further radioactive liquid effluents on the Sellafield site. During this period over 100,000 Curies of radioactivity has been safely removed and treated. The past year has witnessed the very successful introduction of the LAR programme. This has lead to hazard reduction at MSSS and demonstration that the SIXEP facility can meet the significantly increased challenge that the LAR programme represents. Part of the success has been the ability to predict and deliver a realistic production schedule with the availability of the MSSS, EDT and SIXEP facilities being central to this. Most importantly, the LAR programme has been successful in bringing together key stakeholders to deliver this work while integrating with the existing, day to day, demands of the Sellafield site. (authors)

Pether, Colin; Carrol, Phil; Birkett, Eddie; Kibble, Matthew [Sellafield Ltd, Cumbria (United Kingdom)

2012-07-01T23:59:59.000Z

35

Freeze crystallization technology for black liquor concentration. Second interim report  

SciTech Connect (OSTI)

The pulp and paper industry is one of the largest consumers of energy. Concentration of black liquor (the stream resulting from the chemical separation of wood fibers in the pulping operation) uses 25% of the purchased energy to produce pulp, an equivalent of 33 million barrels of oil in 1982. Here it is shown that freeze concentration, an emerging concentration technology, has the potential of reducing the energy consumption by at least 45%. This amounts to a cost savings of $5 to $15 per ton of pulp depending on the cost of energy, geographical location, and method of application.

Not Available

1983-07-01T23:59:59.000Z

36

National Dioxin Study Tier 4 - combustion sources: final test report - Site 8, Black-liquor boiler BLB-C  

SciTech Connect (OSTI)

This report summarizes the results of a dioxin/furan emissions test of a black-liquor recovery boiler equipped with a drybottom electrostatic precipitator for particulate emissions control. Black-liquor recovery boilers are used at kraft pulp mills to produce process steam and to reclaim inorganic chemicals from spent wood pulping liquors. The dioxin/furan emissions test was conducted under Tier 4 of the National Dioxin Study. The primary objective of Tier 4 is to determine if various combustion sources are sources of dioxin and/or furan emissions. If any of the combustion sources are found to emit dioxin or furan, the secondary objective of Tier 4 is to quantify these emissions. Black-liquor recovery boilers are one of 8 combustion-source categories that have been tested in the Tier 4 program. The tested black-liquor boiler, BLB-C, was selected for the test after an initial information screening and a one-day pretest survey visit. Boiler BLB-C is considered representative of black-liquor recovery boilers with dry-bottom electrostatic precipitators. The amount of chloride present in the black-liquor circuit at this site is considered intermediate to high relative to that found at other kraft pulp mills. Data presented in the report include dioxin (tetra through octa homologue +2378 TCDD) and furan (tetra through octa homologue +2378 TCDF) results for both stack samples and ash samples. In addition, process data collected during sampling are also presented.

Jamgochian, C.L.; Keller, L.E.

1987-04-01T23:59:59.000Z

37

Combustion properties of Kraft Black Liquors  

SciTech Connect (OSTI)

In a previous study of the phenomena involved in the combustion of black liquor droplets a numerical model was developed. The model required certain black liquor specific combustion information which was then not currently available, and additional data were needed for evaluating the model. The overall objectives of the project reported here was to provide experimental data on key aspects of black liquor combustion, to interpret the data, and to put it into a form which would be useful for computational models for recovery boilers. The specific topics to be investigated were the volatiles and char carbon yields from pyrolysis of single black liquor droplets; a criterion for the onset of devolatilization and the accompanying rapid swelling; and the surface temperature of black liquor droplets during pyrolysis, combustion, and gasification. Additional information on the swelling characteristics of black liquor droplets was also obtained as part of the experiments conducted.

Frederick, W.J. Jr.; Hupa, M. (Aabo Akademi, Turku (Finland))

1993-04-01T23:59:59.000Z

38

Juan A. Blanco & Dave Flanders (University of British Columbia/Universidad Pblica de Navarra), Dale Littlejohn & Peter Robinson (Community Energy Association), David Dubois (Wood Waste to Rural Heat Project)  

E-Print Network [OSTI]

), Dale Littlejohn & Peter Robinson (Community Energy Association), David Dubois (Wood Waste to Rural Heat Project) August 2013 Fire in the woods or fire in the boiler? A new tool to help rural communities .............................................................................................................................. 25 #12;4 Pacific Institute for Climate Solutions EXECUTIVE SUMMARY Many rural British Columbia (BC

Pedersen, Tom

39

Black Liquor Research Program symposium: proceedings  

SciTech Connect (OSTI)

In the paper pulp industry's recovery boilers, black liquor is sprayed in through nozzle guns near the top of the furnace. This report includes eight papers. (DLC)

Emerson, D.B.; Whitworth, B.A.

1985-03-01T23:59:59.000Z

40

Journal of Hazardous Materials B114 (2004) 7591 Leaching of CCA-treated wood: implications for waste disposal  

E-Print Network [OSTI]

Journal of Hazardous Materials B114 (2004) 75­91 Leaching of CCA-treated wood: implications, and copper from chromated copper arsenate (CCA)-treated wood poses possible environmental risk when disposed. Samples of un-weathered CCA-treated wood were tested using a variety of the US regulatory leaching

Florida, University of

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Highly Energy Efficient Directed Green Liquor Utilization (D...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Highly Energy Efficient Directed Green Liquor Utilization (D-GLU) Pulping Highly Energy Efficient Directed Green Liquor Utilization (D-GLU) Pulping This factsheet describes a...

42

Causticizing for Black Liquor Gasifiers  

SciTech Connect (OSTI)

The cost-benefit outlook of black liquor gasification (BLG) could be greatly improved if the smelt causticization step could be achieved in situ during the gasification step. Or, at a minimum, the increase in causticizing load associated with BLG could be mitigated. A number of chemistries have been proven successful during black liquor combustion. In this project, three in situ causticizing processes (titanate, manganate, and borate) were evaluated under conditions suitable for high temperature entrained flow BLG, and low temperature steam reforming of black liquor. The evaluation included both thermodynamic modeling and lab experimentation. Titanate and manganate were tested for complete direct causticizing (to thus eliminate the lime cycle), and borates were evaluated for partial causticizing (to mitigate the load increase associated with BLG). Criteria included high carbonate conversion, corresponding hydroxide recovery upon hydrolysis, non process element (NPE) removal, and economics. Of the six cases (three chemistries at two BLG conditions), only two were found to be industrially viable: titanates for complete causticizing during high temperature BLG, and borates for partial causticizing during high temperature BLG. These two cases were evaluated for integration into a gasification-based recovery island. The Larsen [28] BLG cost-benefit study was used as a reference case for economic forecasting (i.e. a 1500 tpd pulp mill using BLG and upgrading the lime cycle). By comparison, using the titanate direct causticizing process yielded a net present value (NPV) of $25M over the NPV of BLG with conventional lime cycle. Using the existing lime cycle plus borate autocausticizing for extra capacity yielded a NPV of $16M.

Scott Sinquefeld; James Cantrell; Xiaoyan Zeng; Alan Ball; Jeff Empie

2009-01-07T23:59:59.000Z

43

REFRACTORY FOR BLACK LIQUOR GASIFIERS  

SciTech Connect (OSTI)

The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in-situ; are functionally-graded to give the best combination of thermal, mechanical, and physical properties and chemical stability; or are relatively inexpensive, reliable repair materials. This report covers Task 1.3, Simulative corrosion of candidate materials developed by refractory producers and in the laboratory based on the results of Task 1.1 and Task 1.2. Refractories provided by in-kind sponsors were tested by cup testing, density/porosity determinations, chemical analysis and microscopy. The best performing materials in the cup testing were fused cast materials. However, 2 castables appear to outperforming any of the previously tested materials and may perform better than the fused cast materials in operation. The basis of the high performance of these materials is the low open porosity and permeability to black liquor smelt.

William L. Headrick Jr; Musa Karakus; Jun Wei

2005-03-01T23:59:59.000Z

44

REFRACTORY FOR BLACK LIQUOR GASIFIERS  

SciTech Connect (OSTI)

The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in-situ; are functionally-graded to give the best combination of thermal, mechanical, and physical properties and chemical stability; or are relatively inexpensive, reliable repair materials. Material development will be divided into 2 tasks: Task 1, Development and property determinations of improved and existing refractory systems for black liquor containment. Refractory systems of interest include magnesium aluminate and barium aluminate for binder materials, both dry and hydratable, and materials with high alumina contents, 85-95 wt%, aluminum oxide, 5.0-15.0 wt%, and BaO, SrO, CaO, ZrO{sub 2} and SiC. Task 2, Finite element analysis of heat flow and thermal stress/strain in the refractory lining and steel shell of existing and proposed vessel designs. Stress and strain due to thermal and chemical expansion has been observed to be detrimental to the lifespan of existing black liquor gasifiers. The thermal and chemical strain as well as corrosion rates must be accounted for in order to predict the lifetime of the gasifier containment materials.

William L. Headrick Jr; Musa Karakus; Xiaoting Liang; Alireza Rezaie

2004-10-01T23:59:59.000Z

45

Refractory for Black Liquor Gasifiers  

SciTech Connect (OSTI)

The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in-situ; are functionally-graded to give the best combination of thermal, mechanical, and physical properties and chemical stability; or are relatively inexpensive, reliable repair materials. Material development will be divided into 2 tasks: Task 1, Development and property determinations of improved and existing refractory systems for black liquor containment. Refractory systems of interest include magnesium aluminate and barium aluminate for binder materials, both dry and hydratable, and materials with high alumina contents, 85-95 wt%, aluminum oxide, 5.0-15.0 wt%, and BaO, SrO, CaO, ZrO2 and SiC. Task 2, Finite element analysis of heat flow and thermal stress/strain in the refractory lining and steel shell of existing and proposed vessel designs. Stress and strain due to thermal and chemical expansion has been observed to be detrimental to the lifespan of existing black liquor gasifiers. The thermal and chemical strain as well as corrosion rates must be accounted for in order to predict the lifetime of the gasifier containment materials.

William L. Headrick; Musa Karakus; Alireza Rezaie

2004-03-30T23:59:59.000Z

46

REFRACTORY FOR BLACK LIQUOR GASIFIERS  

SciTech Connect (OSTI)

The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in-situ; are functionally-graded to give the best combination of thermal, mechanical, and physical properties and chemical stability; or are relatively inexpensive, reliable repair materials. Material development will be divided into 2 tasks: Task 1, Development and property determinations of improved and existing refractory systems for black liquor containment. Refractory systems of interest include magnesium aluminate and barium aluminate for binder materials, both dry and hydratable, and materials with high alumina contents, 85-95 wt%, aluminum oxide, 5.0-15.0 wt%, and BaO, SrO, CaO, ZrO{sub 2} and SiC. Task 2, Finite element analysis of heat flow and thermal stress/strain in the refractory lining and steel shell of existing and proposed vessel designs. Stress and strain due to thermal and chemical expansion has been observed to be detrimental to the lifespan of existing black liquor gasifiers. The thermal and chemical strain as well as corrosion rates must be accounted for in order to predict the lifetime of the gasifier containment materials.

William L. Headrick Jr; Musa Karakus; Xiaoting Liang; Alireza Rezaie

2004-07-01T23:59:59.000Z

47

Refractory for Black Liquor Gasifiers  

SciTech Connect (OSTI)

The University of Missouri-Rolla identified materials that permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project was to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study attempted to define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials were selected/developed that either react with the gasifier environment to form protective surfaces in-situ; and were functionally-graded to give the best combination of thermal, mechanical, and physical properties and chemical stability; or are relatively inexpensive, reliable repair materials. Material development were divided into 2 tasks: Task 1, Development and property determinations of improved and existing refractory systems for black liquor containment. Refractory systems of interest include magnesium aluminate and barium aluminate for binder materials, both dry and hydratable, and materials with high alumina contents, 85-95 wt%, aluminum oxide, 5.0-15.0 wt%, and BaO, SrO, CaO, ZrO{sub 2} and SiC. Task 2, Finite element analysis of heat flow and thermal stress/strain in the refractory lining and steel shell of existing and proposed vessel designs. Stress and strain due to thermal and chemical expansion has been observed to be detrimental to the lifespan of existing black liquor gasifiers. The thermal and chemical strain as well as corrosion rates must be accounted for in order to predict the lifetime of the gasifier containment materials.

William L. Headrick Jr; Musa Karakus; Xiaoting Liang

2005-10-01T23:59:59.000Z

48

REFRACTORY FOR BLACK LIQUOR GASIFIERS  

SciTech Connect (OSTI)

The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the materials problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in-situ; are functionally-graded to give the best combination of thermal, mechanical, and physical properties and chemical stability; or are relatively inexpensive, reliable repair materials. Material development will be divided into 2 tasks: Task 1, Development and property determinations of improved and existing refractory systems for black liquor containment. Refractory systems of interest include magnesium aluminate and barium aluminate spinels for binder materials, both dry and hydratable, and materials with high alumina contents, 85-95 wt%, aluminum oxide, 5.0-15.0 wt%, and BaO, SrO, CaO, ZrO{sub 2} and SiC. Task 2, Finite element analysis of heat flow and thermal stress/strain in the refractory lining and steel shell of existing and proposed vessel designs. Stress and strain due to thermal and chemical expansion has been observed to be detrimental to the lifespan of existing black liquor gasifiers. The thermal and chemical strain as well as corrosion rates must be accounted for in order to predict the lifetime of the gasifier containment materials.

William L. Headrick Jr.; Alireza Rezaie

2004-04-01T23:59:59.000Z

49

REFRACTORY FOR BLACK LIQUOR GASIFIERS  

SciTech Connect (OSTI)

The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in-situ; are functionally-graded to give the best combination of thermal, mechanical, and physical properties and chemical stability; or are relatively inexpensive, reliable repair materials. Material development will be divided into 2 tasks: Task 1, Development and property determinations of improved and existing refractory systems for black liquor containment. Refractory systems of interest include magnesium aluminate and barium aluminate for binder materials, both dry and hydratable, and materials with high alumina contents, 85-95 wt%, aluminum oxide, 5.0-15.0 wt%, and BaO, SrO, CaO, ZrO{sub 2} and SiC. Task 2, Finite element analysis of heat flow and thermal stress/strain in the refractory lining and steel shell of existing and proposed vessel designs. Stress and strain due to thermal and chemical expansion has been observed to be detrimental to the lifespan of existing black liquor gasifiers. The thermal and chemical strain as well as corrosion rates must be accounted for in order to predict the lifetime of the gasifier containment materials.

William L. Headrick Jr; Musa Karakus; Xiaoting Liang; Jun Wei

2005-04-01T23:59:59.000Z

50

REFRACTORY FOR BLACK LIQUOR GASIFIERS  

SciTech Connect (OSTI)

The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in-situ; are functionally-graded to give the best combination of thermal, mechanical, and physical properties and chemical stability; or are relatively inexpensive, reliable repair materials. Material development will be divided into 2 tasks: Task 1, Development and property determinations of improved and existing refractory systems for black liquor containment. Refractory systems of interest include magnesium aluminate and barium aluminate for binder materials, both dry and hydratable, and materials with high alumina contents, 85-95 wt%, aluminum oxide, 5.0-15.0 wt%, and BaO, SrO, CaO, ZrO{sub 2} and SiC. Task 2, Finite element analysis of heat flow and thermal stress/strain in the refractory lining and steel shell of existing and proposed vessel designs. Stress and strain due to thermal and chemical expansion has been observed to be detrimental to the lifespan of existing black liquor gasifiers. The thermal and chemical strain as well as corrosion rates must be accounted for in order to predict the lifetime of the gasifier containment materials.

William L. Headrick Jr; Musa Karakus; Xiaoting Liang

2005-07-01T23:59:59.000Z

51

REFRACTORY FOR BLACK LIQUOR GASIFIERS  

SciTech Connect (OSTI)

The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in-situ; are functionally-graded to give the best combination of thermal, mechanical, and physical properties and chemical stability; or are relatively inexpensive, reliable repair materials. Material development will be divided into 2 tasks: Task 1, Development and property determinations of improved and existing refractory systems for black liquor containment. Refractory systems of interest include magnesium aluminate and barium aluminate for binder materials, both dry and hydratable, and materials with high alumina contents, 85-95 wt%, aluminum oxide, 5.0-15.0 wt%, and BaO, SrO, CaO, ZrO{sub 2} and SiC. Task 2, Finite element analysis of heat flow and thermal stress/strain in the refractory lining and steel shell of existing and proposed vessel designs. Stress and strain due to thermal and chemical expansion has been observed to be detrimental to the lifespan of existing black liquor gasifiers. The thermal and chemical strain as well as corrosion rates must be accounted for in order to predict the lifetime of the gasifier containment materials.

William L. Headrick Jr; Musa Karakus; Xiaoting Liang; Jun Wei

2005-01-01T23:59:59.000Z

52

Refractory for Black Liquor Gasifiers  

SciTech Connect (OSTI)

The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the materials problems encountered during the operation of low-pressure high-temperature (LFHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in-situ; are functionally-graded to give the best combination of thermal, mechanical, and physical properties and chemical stability; or are relatively inexpensive, reliable repair materials. Material development will be divided into 2 tasks: Task 1, Development and property determinations of improved and existing refractory systems for black liquor containment. Refractory systems of interest include magnesia aluminate and baria aluminate spinels for binder materials, both dry and hydratable, and materials with high alumina contents, 85-95 wt%, aluminum oxide, 5.0-15.0 wt%, and BaO, SrO, CaO, ZrO and SiC. Task 2, Finite element analysis of heat flow and thermal stress/strain in the refractory lining and steel shell of existing and proposed vessel designs. Stress and strain due to thermal and chemical expansion has been observed to be detrimental to the lifespan of existing black liquor gasifiers. The thermal and chemical strain as well as corrosion rates must be accounted for in order to predict the lifetime of the gasifier containment materials.

William L. Headrick Jr; Alireza Rezaie

2003-12-01T23:59:59.000Z

53

Refractory for Black Liquor Gasifiers  

SciTech Connect (OSTI)

The University of Missouri-Rolla identified materials that permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project was to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study attempted to define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials were selected or developed that reacted with the gasifier environment to form protective surfaces in-situ; and were functionally-graded to give the best combination of thermal, mechanical and physical properties and chemical stability; and are relatively inexpensive, reliable repair materials. Material development was divided into 2 tasks: Task 1 was development and property determinations of improved and existing refractory systems for black liquor containment. Refractory systems of interest include magnesium aluminate and barium aluminate for binder materials, both dry and hydratable, and materials with high alumina contents, 85-95 wt%, aluminum oxide, 5.0-15.0 wt%, and BaO, SrO, CaO, ZrO2 and SiC. Task 2 was finite element analysis of heat flow and thermal stress/strain in the refractory lining and steel shell of existing and proposed vessel designs. Stress and strain due to thermal and chemical expansion has been observed to be detrimental to the lifespan of existing black liquor gasifiers. The thermal and chemical strain as well as corrosion rates must be accounted for in order to predict the lifetime of the gasifier containment materials.

William L. Headrick Jr; Alireza Rezaie; Xiaoting Liang; Musa Karakus; Jun Wei

2005-12-01T23:59:59.000Z

54

REFRACTORY FOR BLACK LIQUOR GASIFIERS  

SciTech Connect (OSTI)

The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the materials problems encountered during the operation of low-pressure high-temperature (LFHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in-situ; are functionally-graded to give the best combination of thermal, mechanical, and physical properties and chemical stability; or are relatively inexpensive, reliable repair materials. Material development will be divided into 2 tasks: Task 1, Development and property determinations of improved and existing refractory systems for black liquor containment. Refractory systems of interest include magnesia aluminate and baria aluminate spinels for binder materials, both dry and hydratable, and materials with high alumina contents, 85-95 wt%, aluminum oxide, 5.0-15.0 wt%, and BaO, SrO, CaO, ZrO and SiC. Task 2, Finite element analysis of heat flow and thermal stress/strain in the refractory lining and steel shell of existing and proposed vessel designs. Stress and strain due to thermal and chemical expansion has been observed to be detrimental to the lifespan of existing black liquor gasifiers. The thermal and chemical strain as well as corrosion rates must be accounted for in order to predict the lifetime of the gasifier containment materials.

William L. Headrick Jr.; Alireza Rezaie

2003-12-01T23:59:59.000Z

55

Refractory for Black Liquor Gasifiers  

SciTech Connect (OSTI)

The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the materials problems encountered during the operation of low-pressure high-temperature (LFHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in-situ; are functionally-graded to give the best combination of thermal, mechanical, and physical properties and chemical stability; or are relatively inexpensive, reliable repair materials. Material development will be divided into 2 tasks: Task 1, Development and property determinations of improved and existing refractory systems for black liquor containment. Refractory systems of interest include magnesia aluminate and baria aluminate spinels for binder materials, both dry and hydratable, and materials with high alumina contents, 85-95 wt%, aluminum oxide, 5.0-15.0 wt%, and BaO, SrO, CaO, ZrO and SiC. Task 2, Finite element analysis of heat flow and thermal stress/strain in the refractory lining and steel shell of existing and proposed vessel designs. Stress and strain due to thermal and chemical expansion has been observed to be detrimental to the lifespan of existing black liquor gasifiers. The thermal and chemical strain as well as corrosion rates must be accounted for in order to predict the lifetime of the gasifier containment materials.

William L. Headrick Jr; Alireza Rezaie

2003-08-01T23:59:59.000Z

56

Refractory for Black Liquor Gasifiers  

SciTech Connect (OSTI)

The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the materials problems encountered during the operation of low-pressure high-temperature (LFHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in-situ; are functionally-graded to give the best combination of thermal, mechanical, and physical properties and chemical stability; or are relatively inexpensive, reliable repair materials. Material development will be divided into 2 tasks: Task 1, Development and property determinations of improved and existing refractory systems for black liquor containment. Refractory systems of interest include magnesia aluminate and baria aluminate spinels for binder materials, both dry and hydratable, and materials with high alumina contents, 85-95 wt%, aluminum oxide, 5.0-15.0 wt%, and BaO, SrO, CaO, ZrO and SiC. Task 2, Finite element analysis of heat flow and thermal stress/strain in the refractory lining and steel shell of existing and proposed vessel designs. Stress and strain due to thermal and chemical expansion has been observed to be detrimental to the lifespan of existing black liquor gasifiers. The thermal and chemical strain as well as corrosion rates must be accounted for in order to predict the lifetime of the gasifier containment materials.

Robert E. Moore; William L. Headrick; Alireza Rezaie

2003-03-31T23:59:59.000Z

57

Mill Integration-Pulping, Stream Reforming and Direct Causticization for Black Liquor Recovery  

SciTech Connect (OSTI)

MTCI/StoneChem developed a steam reforming, fluidized bed gasification technology for biomass. DOE supported the demonstration of this technology for gasification of spent wood pulping liquor (or 'black liquor') at Georgia-Pacific's Big Island, Virginia mill. The present pre-commercial R&D project addressed the opportunities as well as identified negative aspects when the MTCI/StoneChem gasification technology is integrated in a pulp mill production facility. The opportunities arise because black liquor gasification produces sulfur (as H{sub 2}S) and sodium (as Na{sub 2}CO{sub 3}) in separate streams which may be used beneficially for improved pulp yield and properties. The negative aspect of kraft black liquor gasification is that the amount of Na{sub 2}CO{sub 3} which must be converted to NaOH (the so called causticizing requirement) is increased. This arises because sulfur is released as Na{sub 2}S during conventional kraft black liquor recovery, while during gasification the sodium associated Na{sub 2}S is partly or fully converted to Na{sub 2}CO{sub 3}. The causticizing requirement can be eliminated by including a TiO{sub 2} based cyclic process called direct causticization. In this process black liquor is gasified in the presence of (low sodium content) titanates which convert Na{sub 2}CO{sub 3} to (high sodium content) titanates. NaOH is formed when contacting the latter titanates with water, thereby eliminating the causticizing requirement entirely. The leached and low sodium titanates are returned to the gasification process. The project team comprised the University of Maine (UM), North Carolina State University (NCSU) and MTCI/ThermoChem. NCSU and MTCI are subcontractors to UM. The principal organization for the contract is UM. NCSU investigated the techno-economics of using advanced pulping techniques which fully utilize the unique cooking liquors produced by steam reforming of black liquor (Task 1). UM studied the kinetics and agglomeration problems of the conversion of Na{sub 2}CO{sub 3} to (high sodium) titanates during gasification of black liquor in the presence of (low sodium) titanates or TiO{sub 2} (Task 2). MTCI/ThermoChem tested the performance and operability of the combined technology of steam reforming and direct causticization in their Process Development Unit (PDU) (Task 3). The specific objectives were: (1) to investigate how split sulfidity and polysulfide (+ AQ) pulping can be used to increase pulp fiber yield and properties compared to conventional kraft pulping; (2) to determine the economics of black liquor gasification combined with these pulping technologies in comparison with conventional kraft pulping and black liquor recovery; (3) to determine the effect of operating conditions on the kinetics of the titanate-based direct causticization reaction during black liquor gasification at relatively low temperatures ({le} 750 C); (4) to determine the mechanism of particle agglomeration during gasification of black liquor in the presence of titanates at relatively low temperatures ({le} 750 C); and (5) to verify performance and operability of the combined technology of steam reforming and direct causticization of black liquor in a pilot scale fluidized bed test facility.

Adriaan van Heiningen

2007-06-30T23:59:59.000Z

58

Refractory for Black Liquor Gasifiers  

SciTech Connect (OSTI)

The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in-situ; are functionally-graded to give the best combination of thermal, mechanical, and physical properties and chemical stability; or are relatively inexpensive, reliable repair materials. This report covers Task 1.4, Industrial Trial of candidate materials developed by refractory producers and in the laboratory based on the results of Task 1.1, 1.2 and 1.3. Refractories provided by in-kind sponsors to industrial installations tested by cup testing, density/porosity determinations, chemical analysis and microscopy. None of the materials produced in this program have been tried in high temperature gasifiers, but the mortar developed Morcocoat SP-P is outperforming other mortars tested at ORNL. MORCO PhosGun M-90-O has shown in laboratory testing to be an acceptable candidate for hot and cold repairs of existing high temperature gasifiers. It may prove to be an acceptable lining material.

William L. Headrick Jr; Musa Karakus; Xiaoting Laing

2005-10-01T23:59:59.000Z

59

Lowering kraft black liquor viscosity of ultrafiltration  

SciTech Connect (OSTI)

High viscosity is a major factor limiting the percentage total dissolved solids (%TDS) to which kraft black liquor (KBL), a spent pulping liquor, can be concentrated before it is burned to recover its fuel value and its inorganic chemicals. The effect on black liquor viscosity of removing high molecular weight lignin by ultrafiltration of 16% and 24% TDS liquors was studied. Viscosities of ultrafiltration permeates were reduced relative to feed black liquors. When a permeate was concentrated to higher %TDS levels, its viscosity decreased yet further relative to feed samples evaporated to similar solids levels. Retentate viscosity was very high relative to both feed and permeate. Ultrafiltration was carried out at 75/degrees/C using polysulfone membranes in a plate-and-frame or hollow fiber system. Flux rates varied greatly depending upon the specific liquor used. Flux was enhanced by increased temperature and increased linear velocity. The membrane molecular weight cutoff (MWCO) typically used was 50,000; increasing 100,000 or 200,000 did not enhance flux.

Hill, M.K.; Violette, D.A.; Woerner, D.L.

1988-10-01T23:59:59.000Z

60

Development of METHANE de-NOX Reburn Process for Wood Waste and Biomass Fired Stoker Boilers - Final Report - METHANE de-NOX Reburn Technology Manual  

SciTech Connect (OSTI)

The overall objective of this project was to demonstrate the effectiveness of the METHANE de-NOX (MdN) Reburn process in the Forest Products Industry (FPI) to provide more efficient use of wood and sludge waste (biosolids) combustion for both energy generation and emissions reduction (specifically from nitrogen oxides (NOx)) and to promote the transfer of the technology to the wide range of wood waste-fired stoker boilers populating the FPI. This document, MdN Reburn Commercial Technology Manual, was prepared to be a resource to promote technology transfer and commercialization activities of MdN in the industry and to assist potential users understand its application and installation requirements. The Manual includes a compilation of MdN commercial design data from four different stoker boiler designs that were baseline tested as part of the development effort. Design information in the Manual include boiler CFD model studies, process design protocols, engineering data sheets and commercial installation drawings. Each design package is unique and implemented in a manner to meet specific mill requirements.

J. Rabovitser; B. Bryan; S. Wohadlo; S. Nester; J. Vaught; M. Tartan (Gas Technology Institute); R. Glickert (ESA Environmental Solutions)

2007-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

PROSPECTS FOR CO-FIRING OF CLEAN COAL AND CREOSOTE-TREATED WASTE WOOD AT SMALL-SCALE POWER STATIONS  

E-Print Network [OSTI]

If a small-scale clean coal fu eled power plant is co-fu eled with 5 % of cre o-sote-treated used-up sleeper wood, the de con tam i na tion by carbonisation at 500 C in an in di rectly heated ro tary kiln with the di am e ter 1.7 m and ef fec-tive length 10 m can be real ised. It should be in cluded in the 3R Clean Coal Carbonisation Plant sys tem, which pro cesses coal. It will im prove the heat bal ance of the sys tem, since the carbonisation of wood will de liver a lot of high caloricity pyroligneous vapour to the joint fur nace of the 3R Clean Coal Carbonisation Plant. Pine wood sleeper sap wood con tains 0.25 % of sul phur, but the av er age pine sleeper wood (sap wood and heart wood) 0.05% of sul phur. Most of the sul phur is lost with the pyroligneous vapour and burned in the fur nace. Since the 3R Clean Coal Carbonisation Plant is equipped with a flue gases clean ing sys tem, the SO2 emis sion level will not ex-ceed 5 mg/m 3. The char coal of the sap wood por tion of sleep ers and that of the av er age sleeper wood will con tain 0.22 % and 0.035 % of sul phur, re spec-tively. The in crease of the carbonisation tem per a ture does not sub stan tially de crease the sul phur con tent in char coal, al though it is suf fi ciently low, and the char coal can be co-fired with clean coal. The con sid ered pro cess is suit-able for small power plants, if the bio mass in put in the com mon en ergy bal-ance is 5 to 10%. If the mean dis tance of sleep ers trans por ta tion for Cen tral and East ern Eu-rope is es ti mated not to ex ceed 200 km, the co-com bus tion of clean coal and carbonised sleep ers would be an ac cept able op tion from the en vi ron men tal and eco nomic points of view.

Janis Zandersons; Aivars Zhurinsh; Edward Someus

62

Coliquefaction of coal and black liquor to environmentally acceptable liquid fuels  

SciTech Connect (OSTI)

Previous work in the laboratories has demonstrated that addition to lignin to coal during liquefaction significantly increases the depolymerization of coal and enhances the quality of the liquid products. It is believed that thermolysis of the lignin results in the formation of phenoxyl and other reactive radicals at temperatures too low for significant thermolysis of the coal matrix; such radicals are effective and active intermediates that depolymerize coal by cleaving methylene bridges. It has been reported that alkali is also effective for extraction of liquids from coal. The work presented here combines these two reactive agents by utilizing the black liquor waste stream from the Kraft pulping process for coal depolymerization. That waste stream contains large amounts of lignin and sodium hydroxide, as well as other components. To permit comparative evaluations of the extent of coal depolymerization by coprocessing coal and black liquor, reference runs were performed with tetralin alone, sodium hydroxide in tetralin, and lignin in tetralin. Results indicated that the sodium hydroxide-tetralin system resulted in almost 67% conversion at 375 C, 1 hour. The black liquor system exhibited a lower conversion of 60%, indicating some inhibition of the depolymerization reactions by components in the black liquor.

Kim, J. [Korea Inst. of Energy Research, Taejon (Korea, Republic of); Lalvani, S.B.; Muchmore, C.B.; Akash, B.A. [Southern Illinois Univ., Carbondale, IL (United States)

1999-11-01T23:59:59.000Z

63

Pulsed combustion process for black liquor gasification  

SciTech Connect (OSTI)

The objective of this project is to test an energy efficient, innovative black liquor recovery system on an industrial scale. In the MTCI recovery process, black liquor is sprayed directly onto a bed of sodium carbonate solids which is fluidized by steam. Direct contact of the black liquor with hot bed solids promotes high rates of heating and pyrolysis. Residual carbon, which forms as a deposit on the particle surface, is then gasified by reaction with steam. Heat is supplied from pulse combustor resonance tubes which are immersed within the fluid bed. A portion of the gasifier product gas is returned to the pulse combustors to provide the energy requirements of the reactor. Oxidized sulfur species are partially reduced by reaction with the gasifier products, principally carbon monoxide and hydrogen. The reduced sulfur decomposed to solid sodium carbonate and gaseous hydrogen sulfide (H{sub 2}S). Sodium values are recovered by discharging a dry sodium carbonate product from the gasifier. MTCI's indirectly heated gasification technology for black liquor recovery also relies on the scrubbing of H{sub 2}S for product gases to regenerate green liquor for reuse in the mill circuit. Due to concerns relative to the efficiency of sulfur recovery in the MTCI integrated process, an experimental investigation was undertaken to establish performance and design data for this portion of the system.

Durai-Swamy, K.; Mansour, M.N.; Warren, D.W.

1991-02-01T23:59:59.000Z

64

Improved recovery of tall oil from black liquors  

SciTech Connect (OSTI)

Applying a d.c. of less than 15 V to acidified black liquor separates a significant amount of tall oil remaining in the black liquor sludge. An apparatus with graphite electrodes for this process is described.

Zucker, J.

1980-12-09T23:59:59.000Z

65

Mercury emissions during cofiring of sub-bituminous coal and biomass (chicken waste, wood, coffee residue, and tobacco stalk) in a laboratory-scale fluidized bed combustor  

SciTech Connect (OSTI)

Four types of biomass (chicken waste, wood pellets, coffee residue, and tobacco stalks) were cofired at 30 wt % with a U.S. sub-bituminous coal (Powder River Basin Coal) in a laboratory-scale fluidized bed combustor. A cyclone, followed by a quartz filter, was used for fly ash removal during tests. The temperatures of the cyclone and filter were controlled at 250 and 150{sup o}C, respectively. Mercury speciation and emissions during cofiring were investigated using a semicontinuous mercury monitor, which was certified using ASTM standard Ontario Hydra Method. Test results indicated mercury emissions were strongly correlative to the gaseous chlorine concentrations, but not necessarily correlative to the chlorine contents in cofiring fuels. Mercury emissions could be reduced by 35% during firing of sub-bituminous coal using only a quartz filter. Cofiring high-chlorine fuel, such as chicken waste (Cl = 22340 wppm), could largely reduce mercury emissions by over 80%. When low-chlorine biomass, such as wood pellets (Cl = 132 wppm) and coffee residue (Cl = 134 wppm), is cofired, mercury emissions could only be reduced by about 50%. Cofiring tobacco stalks with higher chlorine content (Cl = 4237 wppm) did not significantly reduce mercury emissions. Gaseous speciated mercury in flue gas after a quartz filter indicated the occurrence of about 50% of total gaseous mercury to be the elemental mercury for cofiring chicken waste, but occurrence of above 90% of the elemental mercury for all other cases. Both the higher content of alkali metal oxides or alkali earth metal oxides in tested biomass and the occurrence of temperatures lower than 650{sup o}C in the upper part of the fluidized bed combustor seemed to be responsible for the reduction of gaseous chlorine and, consequently, limited mercury emissions reduction during cofiring. 36 refs., 3 figs. 1 tab.

Yan Cao; Hongcang Zhou; Junjie Fan; Houyin Zhao; Tuo Zhou; Pauline Hack; Chia-Chun Chan; Jian-Chang Liou; Wei-ping Pan [Western Kentucky University (WKU), Bowling Green, KY (USA). Institute for Combustion Science and Environmental Technology (ICSET)

2008-12-15T23:59:59.000Z

66

In Situ Causticizing for Black Liquor Gasification  

SciTech Connect (OSTI)

Black liquor gasification offers a number of attractive incentives to replace Tomlinson boilers but it also leads to an increase in the causticizing load. Reasons for this have been described in previous reports (FY04 ERC, et.al.). The chemistries have also been covered but will be reviewed here briefly. Experimental results of the causticizing reactions with black liquor are presented here. Results of the modeling work were presented in detail in the Phase 1 report. They are included in Table 2 for comparison but will not be discussed in detail. The causticizing agents were added to black liquor in the ratios shown in Table 1, mixed, and then spray-dried. The mixture ratios (doping levels) reflect amount calculated from the stoichiometry above to achieve specified conversions shown in the table. The solids were sieved to 63-90 microns for use in the entrained flow reactors. The firing conditions are shown in Table 2. Pictures and descriptions of the reactors can be found in the Phase 1 annual report. Following gasification, the solids (char) was collected and analyzed by coulometric titration (for carbonate and total carbon), and by inductively coupled plasma emission spectroscopy (ICP) for a wide array of metals.

Scott Alan Sinquefield

2005-10-01T23:59:59.000Z

67

Waste Management in Dsseldorf Combination of separate collection,  

E-Print Network [OSTI]

Waste Management in Düsseldorf Combination of separate collection, recycling and waste-to-energy Biowaste Garden waste Light packaging Paper Glass Wood from bulky waste Bulky waste Rest / mixed waste Bio- Garden- Paper Glass Light Metals Wood Bulky Rest waste waste Card- Pack. waste board Saved CO2

Columbia University

68

Electrochemical treatment of black liquor from straw pulping  

SciTech Connect (OSTI)

The conventional black liquor regeneration process is not always suitable for pulping plants of nonwood fibers due to the unfavorable ratio of organic to inorganic solids. This paper presents an alternative treatment based on an electrolysis process of the soda black liquor from straw pulping. This alternative method minimizes the environmental impact by recovering the caustic at the same time that the liquor is acidified, which favors the later separation of the lignin.

Blanco, M.A.; Negro, C.; Tijero, J. [Complutense Univ., Madrid (Spain)] [and others

1996-11-01T23:59:59.000Z

69

Physical properties of Kraft Black Liquor. Interim report, Phase II  

SciTech Connect (OSTI)

Objectives are to determine the rheological, thermal, and surface properties of Kraft Black Liquors, and to relate these properties to the chemical composition and to pulping conditions. A four-variable, multi-level pulping experiment is being conducted. Pulping results are reported. Complete analyses of the liquors have been done. Thermal analyses have been done. DSC was employed to determine heat capacities of black liquors and lignins. Rheological (viscosity) studies are being conducted. Density and thermal expansion have been studied for seven liquors. Energy savings through more efficient recovery systems are appreciable.

Fricke, A.L.

1985-03-01T23:59:59.000Z

70

Fundamental studies of black liquor combustion  

SciTech Connect (OSTI)

The fundamentals of black liquor combustion are being studied in a project being carried out for the US Department of Energy by the Institute of Paper Science Technology (IPST, formerly the Institute of Paper Chemistry) and the National Institute of Science Technology (NIST, formerly the National Bureau of Standards). The project was divided into four phases. This report covers the completion of Phase 1 (in-flight processes), the results of all of the work on Phase 2 (char bed processes), Phase 3 (fume processes), and Phase 4 (furnace simulation). 41 refs., 62 figs., 30 tabs.

Clay, D.T.; Lien, S.J.; Grace, T.M.; Brown, C.A.; Empie, H.L.; Macek, A.; Amin, N.; Charangundla, S.R.

1990-03-01T23:59:59.000Z

71

Journal of Hazardous Materials A135 (2006) 2131 Leaching of chromated copper arsenate (CCA)-treated wood in a  

E-Print Network [OSTI]

-treated wood is incinerated, resulting arsenic emis- sions demand the use of proper air pollution control, mining waste, or wood. The feasibility of managing CCA-treated wood in monofills was examined using

Florida, University of

72

Effect of pulping conditions and black liquor composition on Newtonian viscosity of high solids kraft black liquors  

SciTech Connect (OSTI)

The influence of black liquor composition and solids concentrations on the Newtonian viscosity of slash pine black liquors over wide ranges of temperature (up to 140 C) and solids concentrations (between 50% and 83% solids) has been studied. It was found that the zero shear rate viscosity of high solids black liquors depends strongly on the cooking conditions and/or black liquor composition. Not only is high solids viscosity affected by lignin molecular weight and lignin concentration in the liquor but other organic and inorganic constituents of black liquor also make a significant contribution to viscosity. The dependency of zero shear rate viscosity on solids concentrations, and temperature is defined. The Newtonian viscosities vary over a wide range depending on temperature, solids concentrations and solids composition. The results indicate that, at fixed levels of effective alkali and sulfidity, the zero shear rate viscosities can be described as a function of both lignin concentration and lignin molecular weight. The viscosity of black liquor is an increasing function of the organics-to-inorganics ratio and is a decreasing function of the concentration of sodium and chloride ions and pH of the liquor.

Zaman, A.A.; Fricke, A.L. [Univ. of Florida, Gainesville, FL (United States). Dept. of Chemical Engineering] [Univ. of Florida, Gainesville, FL (United States). Dept. of Chemical Engineering

1996-02-01T23:59:59.000Z

73

WoodChemistry Wood Degradation & Preservation  

E-Print Network [OSTI]

31 WoodChemistry Wood Degradation & Preservation Chemical Utilization of Wood Pulp & Paper and carbohydrates is of considerable interest in connection with a number of issues in wood chemistry, such as the reactions taking place during the formation of wood, the natural molecular weight distribution of lignin

Geldenhuys, Jaco

74

Effect of pulsation on black liquor gasification. Final report  

SciTech Connect (OSTI)

Pyrolysis is an endothermic process. The heat of reaction is provided either by partial combustion of the waste or by heat transfer from an external combustion process. In one proposed system black liquor is pyrolized in a fluidized bed to which heat is added through a series of pulse combustor tail pipes submerged in the bed material. This system appears promising because of the relatively high heat transfer in pulse combustors and in fluidized beds. Other advantages of pulse combustors are discussed elsewhere. The process is, however, only economically viable if a part of the pyrolysis products can be used to fire the pulse combustors. The overall goals of this study were to determine: (1) which is the limiting heat transfer rate in the process of transferring heat from the hot combustion products to the pipe, through the pipe, from the tail pipe to the bed and through the bed; i.e., whether increased heat transfer within the pulse combustor will significantly increase the overall heat transfer rate; (2) whether the heat transfer benefits of the pulse combustor can be utilized while maintaining the temperature in the bed within the narrow temperature range required by the process without generating hot spots in the bed; and (3) whether the fuel gas produced during the gasification process can be used to efficiently fire the pulse combustor.

Zinn, B.T.; Jagoda, J.; Jeong, H.; Kushari, A.; Rosen, L.J.

1998-12-01T23:59:59.000Z

75

Wood Resources International  

E-Print Network [OSTI]

Wood Resources International Wood Raw Material Consumption on the Rise Despite Weak Global Economy UNECE Timber Committee Meeting October 7-8, 2003 Geneva, Switzerland Hkan Ekstrm Wood Resources International #12;Wood Resources International Outline Roundwood Removals Roundwood Consumption Raw

76

Proceedings of the black liquor research program review fourth meeting held July 28--30, 1987  

SciTech Connect (OSTI)

Research programs, presented at the black liquor review meeting are described. Research topics include the following: Cooperative Program in Kraft Recovery; Black Liquor Physical Properties; Viscosity of Strong Black Liquor; Ultrafiltration of Kraft Black Liquor; Molecular Weight Distribution of Kraft Lignin; Black Liquor Droplet Formation Project; Fundamental Studies of Black Liquor Combustion; Black Liquor Combustion Sensors; Flash X-ray Imagining of Black Liquor Sprays; Laser Induced Fluorescence For Process Control In The Pulp and Paper Industry; Recovery Boiler Optimization; Black Liquor Gasification and Use of the Products in Combined-Cycle Cogeneration; Black Liquor Steam Plasma Automization; The B and W Pyrosonic 2000R System; Monsteras Boiler Control System; and Cooperative Program Project Reviews. Individual projects are processed separately for the data bases.

Emerson, D. B.; Whitworth, B. A.

1987-10-01T23:59:59.000Z

77

Char reactions during kraft black liquor pyrolysis  

SciTech Connect (OSTI)

The pyrolysis characteristics of dried black liquor particles were investigated at high heating rates in a laminar entrained-flow reactor at temperatures of 600-1100{degrees}C. Primary pyrolysis of the organic fraction occurred very rapidly, in less 0.5 seconds. Char yields at the end or volatiles evolution were 58-72%. The decreased with increasing reactor temperature to 900{degrees}C but remained constant at higher temperatures. 35-65% of the fuel nitrogen was volatilized, nearly all in less than 0.5 s. Relatively little fuel nitrogen was evolved from the char. Significant alkali metal chloride volatization from the char occurred at all temperatures, while additional sodium volatilization became important above 900{degrees}C. Reduction of sulfur species in the char increased rapidly with increasing temperature. A temperature-dependent delay time in the onset of Na{sub 2}S formation was observed.

Frederick, W.J.; Sricharoenchaikul, V.; Reis, V.V. [Oregon State Univ., Corvallis, OR (United States)

1995-12-01T23:59:59.000Z

78

Demonstration of Black Liquor Gasification at Big Island  

SciTech Connect (OSTI)

This Final Technical Report provides an account of the project for the demonstration of Black Liquor Gasification at Georgia-Pacific LLC's Big Island, VA facility. This report covers the period from May 5, 2000 through November 30, 2006.

Robert DeCarrera

2007-04-14T23:59:59.000Z

79

Drum drying of black liquor using superheated steam impinging jets  

SciTech Connect (OSTI)

A novel drum dryer for black liquor utilizing multiple impinging jets of superheated steam was designed and built to evaluate the performance characteristics and effects of various operating parameters thereon. Appropriate ranges of parameters such as steam jet temperature and velocity were examined experimentally to quantify the optimal operating conditions for the formation of black liquor film on the drum surface as well as the drying kinetics.

Shiravi, A.H.; Mujumdar, A.S.; Kubes, G.J. [McGill Univ., Montreal, Quebec (Canada)

1997-05-01T23:59:59.000Z

80

Controlled black liquor viscosity reduction through salting-in  

SciTech Connect (OSTI)

Black liquor viscosity increases exponentially with solids content and therefore causes processing problems for the paper industry by being a limiting factor in the Kraft pulp process. This study investigates a new approach for achieving viscosity reduction by salting-in black liquor through the addition of thiocyanate salts. These salts generally increase the solubility of the polymer constituents in black liquor, leading to a decrease in its viscosity. Several thiocyanate salts capable of reducing liquor viscosity by more than two orders of magnitude have been identified, with viscosity reduction greatest at high solids content. Salting-in of black liquor depends on the cation paired with the thiocyanate anion, as well as on solution pH and temperature. Comparative studies reveal the most effective viscosity-reducing agent of the series examined and that lignin plays an important role in the viscosity behavior of both unmodified and salted-in black liquor at high solids concentrations. These experimental findings are interpreted in terms of the underlying principles that describe salting-in and how it affects aqueous solution structure.

Roberts, J.E.; Khan, S.A.; Spontak, R.J. [North Carolina State Univ., Raleigh, NC (United States)] [North Carolina State Univ., Raleigh, NC (United States)

1996-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Proceedings of the black liquor research program review fifth meeting  

SciTech Connect (OSTI)

On June 14--17, 1988 the participants and invited guests of the Cooperative Program in Kraft Recovery gathered in Charleston, South Carolina, to review progress on four major black liquor research programs being executed at the Institute of Paper Chemistry, the University of Maine, the National Bureau of Standards, and the University of Florida. These programs include: (1) Black Liquor Properties; (2) Black Liquor Droplet Formation; (3) Black Liquor Nozzle Evaluation; and (4) Black Liquor Combustion. In addition to the objectives of previous meetings, this meeting made a direct attempt to gather ideas on how to improve our ability to move from new technology concepts to commercial implementation. Also attached is the agenda for the Charleston meeting. The first two days were involved with updates and reviews of the four major black liquor programs. A half day was spent discussing pathways to implementation and developing thoughts on what industry, DOE and academia could do to facilitate commercial implementation of the research results. This publication is a summary of the presentations made in Charleston and the industry responses to the research work. Readers are cautioned that the contents are in-progress updates on the status of the research and do not represent referred technical papers. Any questions regarding the content should be referred to the principal investigators of the project.

Not Available

1988-09-01T23:59:59.000Z

82

Wood biology We present investigations of wood  

E-Print Network [OSTI]

Wood biology We present investigations of wood formation which started in 1999. Samples for investigations are taken from living trees. Processes of wood formation are affected by different factors like temperature and precipitation. #12;We use light microscopy to study cell wall formation in the wood. Double

Cufar, Katarina

83

Wood Curriculum vitae 1 ERIC MATTHEW WOOD  

E-Print Network [OSTI]

Wood ­ Curriculum vitae 1 ERIC MATTHEW WOOD Spatial Analysis for Conservation and Department/17/2014 Postdoctoral Research Associate, University of Wisconsin-Madison PUBLICATIONS Wood, E. M., A. M. Pidgeon, V. C community structure in U.S protected areas. Ecological Applications in press Wood, E. M., and A. M. Pidgeon

Mladenoff, David

84

FRACTURE TOUGHNESS OF WOOD AND WOOD COMPOSITES  

E-Print Network [OSTI]

FRACTURE TOUGHNESS OF WOOD AND WOOD COMPOSITES DURING CRACK PROPAGATION Noah Matsumoto Structural, USA * Corresponding author: John.Nairn@oregonstate.edu SWST member #12;Fracture Toughness of Wood and Wood Composites During Crack Propagation ABSTRACT The mode I fracture toughness as a function of crack

Nairn, John A.

85

Measurement of black liquor surface tension: Technical report No. 3. [Black liquor  

SciTech Connect (OSTI)

Surface tension and density of two kraft black liquors were measured at a series of temperatures, from a minimum value when gas bubbles can be blown into the liquor to a maximum value near the elevated boiling point of a particular sample. Available methods for the measurement of surface tension were evaluated critically and, as a result, the maximum bubble pressure method was selected. Varying the flow rate of the gas changes the frequency of bubble formation and thereby the age of the surface. The parameter has been utilized by many researchers to monitor the diffusion of low surface energy components (e.g., surfactants) to the liquid/air interface. The effect of bubble frequency when tested with a few pure liquids, indicated that the dynamics of bubble formation had to be further examined to separate out inertial and viscous effects from purely surface tension related pressure. The pressure versus flow rate data were extrapolated to zero flow rate and surface tension and density were calculated using these extrapolated values. As expected, surface tension decreased with increasing temperature for all the samples. Surface tension decreases with increasing solids content (when compared with the value for water) to a certain level (about 20%) and it starts to increase again. The decrease in surface tension in the dilute black liquor, is probably due to the decrease in the concentration of water, which has a high surface tension value. The occurrence of the minimum is probably due to the effect of inorganic components dominating over the effect of surfactants and other components. Reduction in the solubilities of the inorganics, promotion of micelles of the surfactants and reduction in the diffusion of surfactants to the surface, also could contribute to this phenomenon. 54 refs., 54 figs., 12 tabs.

Krishnagopalan, J.

1987-09-01T23:59:59.000Z

86

Recaustization of kraft black liquor via bipolar electrodialysis  

SciTech Connect (OSTI)

The US Department of Energy in conjunction with HPD Inc. supported a research program to perform a laboratory feasibility study with various black liquor samples for the recaustization of these samples via bipolar electrodialysis. The research was conducted at the HPD pilot plant facility in Plainfield, Illinois, beginning in April 1989. This report is a summary of the work completed thru November 1989. The program was designed to operate the electrodialyzer in order to obtain performance and engineering data such as current efficiency, power consumption per gram of NaOH produced, and assess fouling and/or membrane durability. Prior to the electrodialysis laboratory runs, the black liquor samples were pretreated in order to remove as much lignin as possible. The black liquor samples were air oxidized, acidified to pH = 9.0 and pH = 2.0 and later filtered via a Buchner funnel under vacuum. The filtrate was then utilized to become the feed to the electrodialysis stack. Initial test runs were performed with synthetic solutions of either sodium sulfate or sodium bicarbonate in order to determine acceptable operating current, power, current efficiencies, and fouling behavior. A second set of test were conducted with a series of four Southern Kraft black liquor samples. Based on the results of this study, it was determined that the use of bipolar electrodialysis for producing a caustic stream and an acidified black liquor stream is feasible and was demonstrated. 9 refs., 27 figs., 32 tabs.

Koumoundouros, J.A.; Oshen, S.; Lynch, J.D.

1990-05-01T23:59:59.000Z

87

Ultrafiltration of kraft black liquor: Final report, Phase 3  

SciTech Connect (OSTI)

Since 1981, a research program has been in progress to determine the physical properties of kraft black liquors and to develop methods for reduction of data and correlation of properties with pumping conditions. The basic premise that has been used to direct the research program is that kraft black liquor behaves as a polymer solution, particularly at high solids, and that the behavior is dominated by the characteristics of the lignin present. This premise is proving to be correct, and the principles that follow from this premise are proving to be successful for data reduction and correlation. The research has been a complex program involving experimental pulping, chemical analysis, lignin separation and characterization, thermal analysis, rheological measurements, and considerable equipment and methods development. Due to the complexity of the program, the unforeseen need to expend a great deal of effort in development of experimental techniques for analysis, and the fact that our liquors proved to be unstable at high temperatures and solids, all of the original objectives could not be accomplished. However, our program has added substantially to the body of knowledge of physical properties of black liquor. Our results indicate that the goal of developing correlations for physical properties of kraft black liquor is practical and can be realized through extension of the present work. 21 refs., 32 figs.

Hill, M.K.

1988-04-01T23:59:59.000Z

88

Wood-Coal Fired "Small" Boiler Case Study  

E-Print Network [OSTI]

extremely attrac t:i.ve to today's capital investment market. 7. Several states, including North Carolina, have enacted 15% State Tax Credits to further the use of wood fuel boilers. Specific examples of the utilization of wood as a boiler fuel include... on the fact that Galaxy would be purchasing all of its waste wood fuel, as well as supplemental coal if needed. Efficiency guarantees of 80% on wood waste with less than 10% moisture content were given, as well as 78.5% on coal. These efficiencies were...

Pincelli, R. D.

1980-01-01T23:59:59.000Z

89

Alaska Wood Biomass Energy Project Final Report  

SciTech Connect (OSTI)

The purpose of the Craig Wood Fired Boiler Project is to use waste wood from local sawmilling operations to provide heat to local public buildings, in an effort to reduce the cost of operating those buildings, and put to productive use a byproduct from the wood milling process that otherwise presents an expense to local mills. The scope of the project included the acquisition of a wood boiler and the delivery systems to feed wood fuel to it, the construction of a building to house the boiler and delivery systems, and connection of the boiler facility to three buildings that will benefit from heat generated by the boiler: the Craig Aquatic Center, the Craig Elementary School, and the Craig Middle School buildings.

Jonathan Bolling

2009-03-02T23:59:59.000Z

90

HIGHLY ENERGY EFFICIENT D-GLU (DIRECTED-GREEN LIQ-UOR UTILIZATION) PULPING  

SciTech Connect (OSTI)

Purpose: The purpose of the project was to retrofit the front end (pulp house) of a commercial kraft pulping mill to accommodate a mill green liquor (GL) impregna-tion/soak/exposure and accrue downstream physical and chemical benefits while prin-cipally reducing the energy footprint of the mill. A major player in the mill contrib-uting to excessive energy costs is the lime kiln. The project was intended to offload the energy (oil or natural gas) demands of the kiln by by-passing the causticization/slaking site in the recovery area and directly using green liquor as a pulping medium for wood. Scope: The project was run in two distinct, yet mutually compatible, phases: Phase 1 was the pre-commercial or laboratory phase in which NC State University and the Insti-tute of Paper Science and Technology (at the Georgia Institute of Technology) ran the pulping and associated experiments, while Phase 2 was the mill scale trial. The first tri-al was run at the now defunct Evergreen Pulp Mill in Samoa, CA and lead to a partial retrofit of the mill that was not completed because it went bankrupt and the work was no longer the low-hanging fruit on the tree for the new management. The second trial was run at the MeadWestvaco Pulp Mill in Evedale, TX which for all intents and pur-poses was a success. They were able to fully retrofit the mill, ran the trial, studied the pulp properties, and gave us conclusions.

Lucia, Lucian A

2013-04-19T23:59:59.000Z

91

Black liquor gasification phase 2D final report  

SciTech Connect (OSTI)

This report covers work conducted by Rockwell International under Amendment 5 to Subcontract STR/DOE-12 of Cooperative Agreement DE-AC-05-80CS40341 between St. Regis Corporation (now Champion International) and the Department of Energy (DOE). The work has been designated Phase 2D of the overall program to differentiate it from prior work under the same subcontract. The overall program is aimed at demonstrating the feasibility of and providing design data for the Rockwell process for gasifying Kraft black liquor. In this process, concentrated black liquor is converted into low-Btu fuel gas and reduced melt by reaction with air in a specially designed gasification reactor.

Kohl, A.L.; Stewart, A.E.

1988-06-01T23:59:59.000Z

92

Modification of alkaline pulping to facilitate the isolation of aliphatic acids. Part 1. Sodium hydroxide pretreatment of pine wood  

SciTech Connect (OSTI)

Pretreating pine chips (Pinus sylvestris) with sodium hydroxide prior to the alkaline delignification kraft, kraft-anthraquinone, and soda-anthraquinone) can facilitate the recovery of the carbohydrate degradation products from alkaline pulping liquors. Under suitable pretreatment conditions large amounts of carbohydrate degradation products (alipahtic acids) were formed relative to lignin. The lignin fraction was composed of comparatively low-molecular-weight fragments. Although the delignification was considerably retarded and the yield (based on wood) was decreased by 1-3%, the properties of the resulting pulp were essentially maintained despite pretreatment. Finally, data are given for the composition of aliphatic acids in liquors resulting from pretreatments.

Alen, R.; Niemelae, K.; Sjoestroem, E.

1984-01-01T23:59:59.000Z

93

Advancement of High Temperature Black Liquor Gasification Technology  

SciTech Connect (OSTI)

Weyerhaeuser operates the world's only commercial high-temperature black liquor gasifier at its pulp mill in New Bern, NC. The unit was started-up in December 1996 and currently processes about 15% of the mill's black liquor. Weyerhaeuser, Chemrec AB (the gasifier technology developer), and the U.S. Department of Energy recognized that the long-term, continuous operation of the New Bern gasifier offered a unique opportunity to advance the state of high temperature black liquor gasification toward the commercial-scale pressurized O2-blown gasification technology needed as a foundation for the Forest Products Bio-Refinery of the future. Weyerhaeuser along with its subcontracting partners submitted a proposal in response to the 2004 joint USDOE and USDA solicitation - 'Biomass Research and Development Initiative'. The Weyerhaeuser project 'Advancement of High Temperature Black Liquor Gasification' was awarded USDOE Cooperative Agreement DE-FC26-04NT42259 in November 2004. The overall goal of the DOE sponsored project was to utilize the Chemrec{trademark} black liquor gasification facility at New Bern as a test bed for advancing the development status of molten phase black liquor gasification. In particular, project tasks were directed at improvements to process performance and reliability. The effort featured the development and validation of advanced CFD modeling tools and the application of these tools to direct burner technology modifications. The project also focused on gaining a fundamental understanding and developing practical solutions to address condensate and green liquor scaling issues, and process integration issues related to gasifier dregs and product gas scrubbing. The Project was conducted in two phases with a review point between the phases. Weyerhaeuser pulled together a team of collaborators to undertake these tasks. Chemrec AB, the technology supplier, was intimately involved in most tasks, and focused primarily on the design, specification and procurement of facility upgrades. Chemrec AB is also operating a pressurized, O2-blown gasifier pilot facility in Piteaa, Sweden. There was an exchange of knowledge with the pressurized projects including utilization of the experimental results from facilities in Piteaa, Sweden. Resources at the Georgia Tech Research Corporation (GTRC, a.k.a., the Institute of Paper Science and Technology) were employed primarily to conduct the fundamental investigations on scaling and plugging mechanisms and characterization of green liquor dregs. The project also tapped GTRC expertise in the development of the critical underlying black liquor gasification rate subroutines employed in the CFD code. The actual CFD code development and application was undertaken by Process Simulation, Ltd (PSL) and Simulent, Ltd. PSL focused on the overall integrated gasifier CFD code, while Simulent focused on modeling the black liquor nozzle and description of the black liquor spray. For nozzle development and testing Chemrec collaborated with ETC (Energy Technology Centre) in Piteae utilizing their test facility for nozzle spray investigation. GTI (Gas Technology Institute), Des Plains, IL supported the team with advanced gas analysis equipment during the gasifier test period in June 2005.

Craig Brown; Ingvar Landalv; Ragnar Stare; Jerry Yuan; Nikolai DeMartini; Nasser Ashgriz

2008-03-31T23:59:59.000Z

94

Wood Quality: The Effects  

E-Print Network [OSTI]

Wood Quality: The Effects of Planting Density and Thinning Eini C. Lowell PNW Research Station wood quality? By volume, characteristic, product? #12;http://jilldenton.files.wordpress.com/2007, faster #12;What is it that defines wood quality?What is it that defines wood quality? Density: earlywood

95

A comprehensive program to develop correlations for physical properties of kraft black liquor. Final report  

SciTech Connect (OSTI)

The overall objective of the program was to develop correlations to predict physical properties within requirements of engineering precision from a knowledge of pulping conditions and of kraft black liquor composition, if possible. These correlations were to include those relating thermodynamic properties to pulping conditions and liquor composition. The basic premise upon which the research was based is the premise that black liquor behaves as a polymer solution. This premise has proven to be true, and has been used successfully in developing data reduction methods and in interpreting results. A three phase effort involving pulping, analysis of liquor composition, and measurement of liquor properties was conducted.

Fricke, A.L.; Zaman, A.A.

1998-05-01T23:59:59.000Z

96

Report on the WORKSHOP ON COMMERCIALIZATION OF BLACK LIQUOR  

E-Print Network [OSTI]

Report on the WORKSHOP ON COMMERCIALIZATION OF BLACK LIQUOR AND BIOMASS GASIFICATION FOR GAS or industry cycle (BGCC) technologies for pulp and paper co~mitm~nt to the develo~ment of gasification systems (existing) technology with an greenhouse gas emissions mitigation measures. emerging (gasification

97

CHAMPAIGN-URBANA FOOD AND LIQUOR GUIDE 1. Introduction  

E-Print Network [OSTI]

(217) 352-7467. Excellent Mexican and Latin American- influenced food. Service can be a bit slowCHAMPAIGN-URBANA FOOD AND LIQUOR GUIDE 1. Introduction This is a short, incomplete, and personally. It is standard to tip 15-20% for reasonable service. A indicates a place that we like, and indicates a place we

Athreya, Jayadev

98

Sodium and sulfur release and recapture during black liquor burning  

SciTech Connect (OSTI)

The objective of this study was to provide data on sulfur and sodium volatilization during black liquor burning, and on SO2 capture by solid sodium carbonate and sodium chloride. This data was interpreted and modeled into rate equations suitable for use in computational models for recovery boilers.

Frederick, W.J.; Iisa, K.; Wag, K.; Reis, V.V.; Boonsongsup, L.; Forssen, M.; Hupa, M.

1995-08-01T23:59:59.000Z

99

In situ analysis of ash deposits from black liquor combustion  

SciTech Connect (OSTI)

Aerosols formed during combustion of black liquor cause a significant fire-side fouling problem in pulp mill recovery boilers. The ash deposits reduce heat transfer effectiveness, plug gas passages, and contribute to corrosion. Both vapors and condensation aerosols lead to the formation of such deposits. The high ash content of the fuel and the low dew point of the condensate salts lead to a high aerosol and vapor concentration in most boilers. In situ measurements of the chemical composition of these deposits is an important step in gaining a fundamental understanding of the deposition process. Infrared emission spectroscopy is used to characterize the composition of thin film deposits resulting from the combustion of black liquor and the deposition of submicron aerosols and vapors. New reference spectra of Na{sub 2}SO{sub 4}, K{sub 2}SO{sub 4}, Na{sub 2}CO{sub 3} and K{sub 2}CO{sub 3} pure component films were recorded and compared with the spectra of the black liquor deposit. All of the black liquor emission bands were identified using a combination of literature data and ab initio calculations. Ab initio calculations also predict the locations and intensities of bands for the alkali vapors of interest. 39 refs., 9 figs.

Bernath, P. [Sandia National Labs., Livermore, CA (United States). Combustion Research Facility]|[Univ. of Toronto, Ontario (Canada); Sinquefield, S.A. [Sandia National Labs., Livermore, CA (United States). Combustion Research Facility]|[Oregon State Univ., Eugene, OR (United States); Baxter, L.L.; Sclippa, G.; Rohlfing, C. [Sandia National Labs., Livermore, CA (United States). Combustion Research Facility; Barfield, M. [Sandia National Labs., Livermore, CA (United States). Combustion Research Facility]|[Univ. of Arizona, Tucson, AZ (United States)

1996-05-01T23:59:59.000Z

100

A comprehensive program to develop correlations for the physical properties of kraft black liquors  

SciTech Connect (OSTI)

Experimental work includes pulping, liquor analysis, lignin purification and characterization, vapor-liquid equilibria, heat capacity, heats of solution and combustion, and viscosity measurements. It is now possible to operate the digester as a closed, rotating reactor or as a batch reactor with liquor circulation. When operated with liquor circulation, temperatures within the chip bed can be monitored during cooking. Cooking is reproducible, and cooks are being performed to produce liquors for experimental studies. The digester could be further modified to permit them to conduct rapid exchange batch pulping or to permit them to simulate continuous pulping. Liquors are now routinely analyzed to determine all components, except higher molecular weight organic acids and extractives. Lignin determination by UV-visible means has been improved. Lignin purification from black liquor has been improved and lignin molecular weights are determined routinely. The paper describes the digestor, the large scale evaporation, liquor analysis, thermal studies, and viscosity results. 31 figs., 5 tabs.

Fricke, A.L.

1990-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Recovery of solvent and by-products from organosolv black liquor  

SciTech Connect (OSTI)

The recovery of alcohol and by-products from ethanol-water and methanol-water pulping liquors was studied. The recovery system proposed consists of three stages: black liquor flashing, lignin precipitation, and precipitation distillation of mother liquor. At the flash stage, 47 and 51% of the alcohol in the black liquor are recovered for ethanol and methanol processes, respectively. The lignin recovery yield at the precipitation stage is 67% for ethanol black liquor and 73% for methanol black liquor. The distillation of precipitation mother liquors enables recovery of 98% ethanol and 96% methanol from this stream as distillate, whereas the distillation residue contains significant amounts of sugars, furfural, and acetic acid that can be recovered. The study concludes with the overall mass balance for the recovery system proposed.

Botello, J.I.; Gilarranz, M.A.; Rodriguez, F.; Oliet, M. [Univ. Complutense de Madrid (Spain). Dept. de Ingenieria Quimica] [Univ. Complutense de Madrid (Spain). Dept. de Ingenieria Quimica

1999-09-01T23:59:59.000Z

102

Wood Products 201213 Student Handbook  

E-Print Network [OSTI]

Wood Products 201213 Student Handbook Ecosystem Science and Management College ........................................................................................................................... 2 Wood Products Undergraduate Program ...................................................................................................................................................... 3 Careers for Wood Products Majors

Boyer, Elizabeth W.

103

Quantities of Arsenic-Treated Wood in Demolition Debris Generated by  

E-Print Network [OSTI]

Research Quantities of Arsenic-Treated Wood in Demolition Debris Generated by Hurricane Katrina B R of the demolition debris is wood waste of which a significant proportion is treated with preservatives, including preservatives containing arsenic. As a result of the large scale destruction of treated wood structures

Florida, University of

104

Energie-Cits 2001 BIOMASS -WOOD  

E-Print Network [OSTI]

Energie-Cités 2001 BIOMASS - WOOD Gasification / Cogeneration ARMAGH United Kingdom Gasification is transferring the combustible matters in organic waste or biomass into gas and pure char by burning the fuel via it allows biomass in small-scaled engines and co-generation units ­ which with conventional technologies

105

Introduction Mich ael Wood  

E-Print Network [OSTI]

Introduction Mich ael Wood Italo Calvino was discreet about his life and the lives of others or mechanical means without prior written permission of the publisher. #12;viii michael wood notion with great

Rowley, Clarence W.

106

WOOD STREET METERED LOT  

E-Print Network [OSTI]

LOT E1 LOT O WOOD STREET METERED LOT LOT W5 LOT C4 LOT B4 LOT L LOT M MARSHFIELDAVENUE PAULINASTREET Clinical Sciences Building UI Hospital Wood Street Station Clinical Sciences North Grand Grounds Garden

Dai, Yang

107

Qualifying Wood Stove Deduction  

Broader source: Energy.gov [DOE]

This incentive allows Arizona taxpayers to deduct the cost of converting an existing wood fireplace to a qualifying wood stove. The cost to purchase and install all necessary equipment is tax...

108

Residential Wood Residential wood combustion (RWC) is  

E-Print Network [OSTI]

Residential Wood Combustion Residential wood combustion (RWC) is increasing in Europe because PM2.5. Furthermore, other combustion- related sources of OA in Europe may need to be reassessed. Will it affect global OA emission estimates? Combustion of biofuels is globally one of the major OA sources

109

Physical properties of kraft black liquor. Final report. Phase I  

SciTech Connect (OSTI)

Methods were selected, equipment installed, and procedures developed for determining rheological properties; for determining thermal properties (stability, density, thermal expansion, and heat capacity); for purification and characterization of lignin (glass transition, stability, weight average molecular weight, and number average molecular weight); and for performing chemical analyses (negative inorganic ions, positive inorganic ions, acid organic salts, lignin, and total solids). A strategy for pulping to supply test liquors was developed, and a statistically designed pulping experiment was specified for a Southern softwood species. Arrangements were made for performing initial pulping work in an industrial pilot plant, and a preliminary set of pulping experiments were conducted. Liquors from the preliminary pulping experiments were used to test procedures and to determine reproducibility of the experiment. Literature was also surveyed and preliminary selection of designs for a pilot digester, and for equipment to determine surface tension were made.

Fricke, A.L.

1983-12-01T23:59:59.000Z

110

Conceptual design of a black liquor gasification pilot plant  

SciTech Connect (OSTI)

In July 1985, Champion International completed a study of kraft black liquor gasification and use of the product gases in a combined cycle cogeneration system based on gas turbines. That study indicated that gasification had high potential as an alternative to recovery boiler technology and offered many advantages. This paper describes the design of the plant, the construction of the pilot plant, and finally presents data from operation of the plant.

Kelleher, E. G.

1987-08-01T23:59:59.000Z

111

WOOD PRODUCTS AND UTILIZATION  

E-Print Network [OSTI]

WOOD PRODUCTS AND UTILIZATION V #12;#12;443USDA Forest Service Gen. Tech. Rep. PSW-GTR-160. 1997. Section Overview Wood Products and Utilization1 John R. Shelly2 Forests are obviously a very important asset to California, and their economic and social value to the state is well documented. Wood

Standiford, Richard B.

112

CURRICULUM VITAE Robert Wood  

E-Print Network [OSTI]

CURRICULUM VITAE Robert Wood Assistant Professor Atmospheric Sciences, Box 351640, University. Publications [1] Wood, R., I. M. Stromberg, P. R. Jonas and C. S. Mill, 1997: Analysis of an air motion system on a light aircraft for boundary layer research. J. Atmos. Oceanic Technol., 14, 960-968. [2] Wood, R., D. W

Wood, Robert

113

Freeze crystallization technology for Kraft black liquor concentration. Third report  

SciTech Connect (OSTI)

About 25% of the purchased energy in the pulp and paper industry is used to concentrate black liquor. The technical feasibility of using freeze concentration to supplement evaporation has been successfully demonstrated, and results indicate that energy consumption can be reduced 45%. After compiling a considerable data base on the characteristics of black liquor at low temperature and after developing a computer program to aid analysis, the process chosen was vacuum freezing-vapor absorption (VFVA). A pilot plant was built and operated; however, due to problems with crystallization of the absorbent and contamination, it was found that maintaining the conditions necessary for a continuous process was not practical at the present state of development. Therefore, indirect freezing was used for all subsequent work. This required the design and fabrication of a simple shuttle crystallizer to replace scraped surface units conventionally used. CSI also developed an integrated ice separation column that combined crystal growth, a concentration gradient, and washing all in one unit. Finally, extensive heat transfer coefficient data were collected so that a preliminary design could be completed for a 350 TPD industrial freeze concentration unit. An economic analysis was calculated in order to compare using evaporation and freeze concentration to process the increased liquor flow from a pulp mill expansion. A 200,000 lb/hr freezing unit used to preconcentrate the mill's entire stream up to 18.7% solids would save $10 to $16 per ton of pulp.

Johnson, W.E.; Rhodes, C.R.

1985-04-01T23:59:59.000Z

114

The use of a permanent magnet for water content measurements of wood chips  

E-Print Network [OSTI]

making machine. The black liquor left over from the pulpingchips, brownstock, and black liquor. This report describes acellulose and water) and black liquor using the bench scale

2001-01-01T23:59:59.000Z

115

A comprehensive program to develop correlations for physical properties of kraft black liquor. Final report  

SciTech Connect (OSTI)

A wide variety of experimental techniques have been used in this work, and many of these have been developed completely or improved significantly in the course of the research done during this program. Therefore, it is appropriate to describe these techniques in detail as a reference for future workers so that the techniques can be used in future work with little additional effort or so that the results reported from this program can be compared better with future results from other work. In many cases, the techniques described are for specific analytical instruments. It is recognized that these may be superseded by future developments and improvements in instrumentation if a complete description of techniques used successfully in the past on other instrumentation is available. The total pulping and liquor preparation research work performed included chip and white liquor preparation, digestion, pulp washing, liquor and wash recovery, liquor sampling, weak liquor concentration in two steps to about 45--50% solids with an intermediate soap skimming at about 140F and 27--30% solids, determination of pulp yield and Kappa number, determination of total liquor solids, and a check on the total material balance for pulping. All other research was performed either on a sample of the weak black liquor (the combined black liquor and washes from the digester) or on the skimmed liquor that had been concentrated.

Fricke, A.L.; Zaman, A.A.; Stoy, M.O.; Schmidl, G.W.; Dong, D.J.; Speck, B.

1998-04-01T23:59:59.000Z

116

Alternatives for balanced production of fibers, chemicals, and energy from wood  

SciTech Connect (OSTI)

Increased oil prices and shortage of fossil materials have recently focused interest on the possibilities of conversion of wood to various forms of fuels and chemicals. It is to be expected that new approaches are emerging from the totality of the research effort now in progress. However, irrespective of this, the function of wood as a construction material and a source for fibers presumably remains unchanged or even becomes more important in the future. In regard to the principal pulping methods for production of fibers, no abrupt changes in current practices are probable, apart from important progress in energy saving. In a very favorable situation of the kraft process, when surplus energy generated from the burning of black liquor is availiable, a partial recovery of dissolved organic solids, such as lignin and carbohydrates and their degradation products, becomes more attractive. Quite different is the case of the conventional sulfite process when evaporation and burning of the spent liquor result in severe air pollution. Successful recovery, conversion, and marketing of the dissolved solids can then be the only way to compensate for the expense of using external fuel. Alternatives for production of organic chemicals from kraft and sulfite spent liquors are discussed by taking into consideration the fiber production, composition of dissolved solids, energy requirements, pollution problems, and recovery of inorganic pulping chemicals. 11 references, 10 figures, 5 tables

Sjoestroem, E.

1983-01-01T23:59:59.000Z

117

Ultrafiltration of Kraft Black Liquor: Phase II, Final report  

SciTech Connect (OSTI)

The major justification for examining ultrafiltration was to lower the viscosity of the Kraft Black Liquor by recovering it as an ultrafiltration permeate from which the highest MW lignin had been removed. The liquor could then be concentrated to a higher percentage solids before firing into the recovery boiler. Consequent energy savings for the 1000 ton/day pulp mill would be 2.05 x 10 Btu/y for each percentage increase in TDS (total dissolved solids) to the recovery boiler. This Phase II report gives data on viscosity with percentage solids of KBL permeates. Another favorable effect of ultrafiltration on the permeate properties is disproportionate removal of multivalent ions including the major scaling ion CaS . If this high-viscosity high-Ca retentate could be treated to lower its viscosity and to release the Ca in a non-scaling form, this would enhance the possibility that ultrafiltration might be useful in a mill situation. Included in this report are data on the results of treating the retentate fraction. Other justifications for this program included further information in KBL properties: lignin MW in the KBL at high pH; elemental and sugar analyses; and differential properties of lignins in the retentate and the permeate fractions. A preliminary economic analysis of ultrafiltration is contained in this report. These analyses indicate that with flux rates now attainable, ultrafiltration would not be economically justified at this time if the only justification is to lower KBL viscosity. For certain situations where high Ca liquors present a scaling problem, especially in an evaporator-limited mill, the economics are more favorable. There are also unsolved problems relating to the use of the high viscosity retentate.

Hill, M.K.

1987-09-01T23:59:59.000Z

118

DEMONSTRATION OF BLACK LIQUOR GASIFICATION AT BIG ISLAND  

SciTech Connect (OSTI)

This Technical Progress Report provides an account of the status of the project for the demonstration of Black Liquor Gasification at Georgia-Pacific Corporation's Big Island, VA facility. The report also includes budget information and a milestone schedule. The project to be conducted by G-P is a comprehensive, complete commercial-scale demonstration that is divided into two phases. Phase I is the validation of the project scope and cost estimate. Phase II is project execution, data acquisition and reporting, and consists of procurement of major equipment, construction and start-up of the new system. Phase II also includes operation of the system for a period of time to demonstrate the safe operation and full integration of the energy and chemical recovery systems in a commercial environment. The objective of Phase I is to validate the process design and to engineer viable solutions to any technology gaps. This phase includes engineering and planning for the integration of the full-scale MTCI/StoneChem PulseEnhanced{trademark} black liquor steam-reformer chemical recovery system into G-P's operating pulp and paper mill at Big Island, Virginia. During this phase, the scope and cost estimate will be finalized to confirm the cost of the project and its integration into the existing system at the mill. The objective of Phase II of the project is the successful and safe completion of the engineering, construction and functional operation of the fully integrated full-scale steam reformer process system. This phase includes installation of all associated support systems and equipment required for the enhanced recovery of both energy and chemicals from all of the black liquor generated from the pulping process at the Big Island Mill. The objective also includes operation of the steam reformer system to demonstrate the ability of the system to operate reliably and achieve designed levels of energy and chemical recovery while maintaining environmental emissions at or below the limits set by the environmental permits.

Robert DeCarrera

2003-10-20T23:59:59.000Z

119

Ultrafiltration of Kraft Black Liquor. Final report, Phase I  

SciTech Connect (OSTI)

Kraft Black Liquor (KBL) is ultrafiltered to favorably affect the properties of the KBL permeate. The major property to be changed is viscosity. If the high molecular weight lignin is removed by ultrafiltration, the KBL permeate should show a significant drop in viscosity. An objective of the work reported was to examine how much KBL viscosity is lowered relative to membrane and membrane pore size used in the ultrafiltration. Another objective was an initial evaluation of ultrafiltration equipment and membranes. Operating characteristics were determined for selected equipment and membranes. Decreases in KBL permeate viscosity were indeed seen. (LEW)

Hill, M.K.

1985-10-01T23:59:59.000Z

120

Vapor pressure and boiling point elevation of slash pine black liquors: Predictive models with statistical approach  

SciTech Connect (OSTI)

Vapor-liquid equilibria and boiling point elevation of slash pine kraft black liquors over a wide range of solid concentrations (up to 85% solids) has been studied. The liquors are from a statistically designed pulping experiment for pulping slash pine in a pilot scale digester with four cooking variables of effective alkali, sulfidity, cooking time, and cooking temperature. It was found that boiling point elevation of black liquors is pressure dependent, and this dependency is more significant at higher solids concentrations. The boiling point elevation data at different solids contents (at a fixed pressure) were correlated to the dissolved solids (S/(1 {minus} S)) in black liquor. Due to the solubility limit of some of the salts in black liquor, a change in the slope of the boiling point elevation as a function of the dissolved solids was observed at a concentration of around 65% solids. An empirical method was developed to describe the boiling point elevation of each liquor as a function of pressure and solids mass fraction. The boiling point elevation of slash pine black liquors was correlated quantitatively to the pulping variables, using different statistical procedures. These predictive models can be applied to determine the boiling point rise (and boiling point) of slash pine black liquors at processing conditions from the knowledge of pulping variables. The results are presented, and their utility is discussed.

Zaman, A.A.; McNally, T.W.; Fricke, A.L. [Univ. of Florida, Gainesville, FL (United States)] [Univ. of Florida, Gainesville, FL (United States)

1998-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Effect of sulfidity on the corrosivity of white, green, and black liquors  

SciTech Connect (OSTI)

Corrosion testing was performed in white, green, and black liquors from a kraft mill. The liquors were modified in composition to simulate conditions of high (40%) sulfidity and low (30%) sulfidity, and then heated in laboratory autoclaves to the temperatures of the respective tanks from which the samples were taken. Specimens of carbon and stainless steels were exposed under free corrosion potential conditions, and their corrosion rates determined from weight loss measurements. In white, green, 45% solids black, and flash tank liquors, active corrosion rates for the carbon steels were typically 20 to 75% higher in the higher sulfidity liquors. In 15% solids weak black liquor there was no appreciable difference in corrosion rates, with carbon steels remaining passive in both low and high sulfidity. In 26% solids intermediate black liquor there were large increases in the corrosion rates of carbon steel between low and high sulfidity liquors, resulting from a change from passive to active conditions. Stainless steels UNS S30403, S32304, and S31803 had very low corrosion rates in all the liquors tested, regardless of sulfidity.

Wensley, A.; Champagne, P.

1999-07-01T23:59:59.000Z

122

WOOD MOLASSES IN THE NUTRITION OF RUMINANTS I. ZELENAK K. BODA, J. BUCKO D. JALC T. WALKO I. BESEDA  

E-Print Network [OSTI]

WOOD MOLASSES IN THE NUTRITION OF RUMINANTS I. ZELENAK K. BODA, J. BUCKO D. JALC T. WALKO I. BESEDA of Forestry and Wood Processing, Zvo%n, Czechoslovakia Recently, due to a deficient food and fodder balance. Regarding waste, wood processing by pro- ducts seem to be a practically inexhaustible source of energy food

Paris-Sud XI, Université de

123

A comprehensive program to develop correlations for the physical properties of kraft black liquors. Interim report No.3  

SciTech Connect (OSTI)

The black liquor properties program has conducted a systematic collection data of properties, liquor composition, and lignin characteristics. Complete data, except for some density data, has been collected for Slash Pine black liquors made by experimental pulping at a total of 25 different pulping conditions that cover the entire range used for commercial pulping. In addition, complete data has been collected for some mill liquors and partial properties or composition data has been collected on Slash Pine black liquors made at 16 different pulping conditions and some mill liquors. Data reduction methods have been developed or extended for correlation of viscosity, heat capacity, heat of dilution, and density. Correlation of properties to pulping conditions and of composition to pulping conditions has begun. In most cases, data reduction methods have been developed that are fundamentally based and that have been shown to be generally applicable to all black liquors. While it has not proven to be possible to include research for comprehensive correlations for properties for liquors from other species, we have shown that the behavior of liquors made from other species is similar to that which has been explored extensively for Slash Pine liquors. This report reviews the methods used, describes examples of data reduction methods that have been developed, and presents some preliminary results for correlation of liquor composition and properties to pulping conditions for Slash Pine black liquors.

Fricke, A.L.; Dong, D.J.; Schmidl, G.W.; Stoy, M.A.; Zaman, A.A.

1993-09-01T23:59:59.000Z

124

Friction of wood on steel.  

E-Print Network [OSTI]

?? This thesis deals with the experimental description of friction between steel and wood materials, specifically laminated veneer lumber (LVL) and pine wood with two (more)

Koubek, Radek

2014-01-01T23:59:59.000Z

125

Chopwell Wood Health Project  

E-Print Network [OSTI]

Chopwell Wood Health Project An innovative project of school visits and General Practitioner. The project took place at Chopwell Wood a 360 hectare mixed woodland managed by the Forestry Commission to carry on being involved in the project. Next stage of the project Although the project leader has now

126

Marcelo A. Wood Marcelo A. Wood, Ph.D.  

E-Print Network [OSTI]

Marcelo A. Wood 1 Marcelo A. Wood, Ph.D. Curriculum Vitae June, 2013 Current Appointment: Associate, University of California, Irvine #12;Marcelo A. Wood 2 Teaching Experience: since joining UCI 2006, American College of Neuropsychopharmacology (ACNP) #12;Marcelo A. Wood 3 Journal/Editorial Review Service

Wood, Marcelo A.

127

INVESTIGATION OF FUEL CHEMISTRY AND BED PERFORMANCE IN A FLUIDIZED BED BLACK LIQUOR STEAM REFORMER  

SciTech Connect (OSTI)

The University of Utah project ''Investigation of Fuel Chemistry and Bed Performance in a Fluidized Bed Black Liquor Steam Reformer'' (DOE award number DE-FC26-02NT41490) was developed in response to a solicitation for projects to provide technical support for black liquor and biomass gasification. The primary focus of the project is to provide support for a DOE-sponsored demonstration of MTCI's black liquor steam reforming technology at Georgia-Pacific's paper mill in Big Island, Virginia. A more overarching goal is to improve the understanding of phenomena that take place during low temperature black liquor gasification. This is achieved through five complementary technical tasks: (1) construction of a fluidized bed black liquor gasification test system, (2) investigation of bed performance, (3) evaluation of product gas quality, (4) black liquor conversion analysis and modeling and (5) computational modeling of the Big Island gasifier. Four experimental devices have been constructed under this project. The largest facility, which is the heart of the experimental effort, is a pressurized fluidized bed gasification test system. The system is designed to be able to reproduce conditions near the black liquor injectors in the Big Island steam reformer, so the behavior of black liquor pyrolysis and char gasification can be quantified in a representative environment. The gasification test system comprises five subsystems: steam generation and superheating, black liquor feed, fluidized bed reactor, afterburner for syngas combustion and a flue gas cooler/condenser. The three-story system is located at University of Utah's Industrial Combustion and Gasification Research Facility, and all resources there are available to support the research.

Kevin Whitty

2003-12-01T23:59:59.000Z

128

Investigation of Fuel Chemistry and Bed Performance in a Fluidized Bed Black Liquor Steam Reformer  

SciTech Connect (OSTI)

University of Utah's project entitled 'Investigation of Fuel Chemistry and Bed Performance in a Fluidized Bed Black Liquor Steam Reformer' (DOE Cooperative Agreement DE-FC26-02NT41490) was developed in response to a solicitation released by the U.S. Department of Energy in December 2001, requesting proposals for projects targeted towards black liquor/biomass gasification technology support research and development. Specifically, the solicitation was seeking projects that would provide technical support for Department of Energy supported black liquor and biomass gasification demonstration projects under development at the time.

Kevin Whitty

2007-06-30T23:59:59.000Z

129

Low temperature pyrolysis of black liquor and polymerization of products in alkali aqueous medium  

SciTech Connect (OSTI)

Atmospheric pressure pyrolysis for the production of liquids and gases from black liquor and its calcium salts and acidic precipitate have been carried out in a little stainless steel tube. Yields, sum of liquid and gas products, from black liquor and its calcium salts and acidic precipitate were 44.7%, 52.0% and 59.1% of dry basis respectively. The precipitates obtained from black liquor by acidifying with hydrochloric acid and passing carbon dioxide have been polymerized in aqueous acetone containing formaldehyde and ammonia, and converted a polymeric resin.

Demirbas, A. (Dept. of Chemical Education, Karadeniz Teknik Univ., Trabzon (TR)); Ucan, H. (Dept. of Chemistry, Selcuk Univ., Konya (TR))

1991-01-01T23:59:59.000Z

130

Biomass gasification project gets funding to solve black liquor safety and landfill problems  

SciTech Connect (OSTI)

This paper reports on biomass gasifications. The main by-product in pulp making is black liquor from virgin fiber; the main by-product in paper recycling is fiber residue. Although the black liquor is recycled for chemical and energy recovery, safety problems plague the boilers currently used to do this. The fiber residue is usually transported to a landfill. The system being developed by MTCI will convert black liquor and fiber residue into a combustible gas, which can then be used for a wide variety of thermal or power generation applications.

Black, N.P.

1991-02-01T23:59:59.000Z

131

Kinetics of gasification of black liquor char by steam  

SciTech Connect (OSTI)

This paper reports on the steam gasification kinetics of kraft black liquor char that were studied in a thermogravimetric analysis reactor. The effect of steam and hydrogen concentration on gasification rate can be described by Langmuir-Hinshelwood type kinetics. An activation energy of 210 kJ/mol was obtained. Methane formation was negligible, and H{sub 2}S was the major gaseous sulfur-containing product obtained over the temperature range studied, 873-973 K. The CO{sub 2} concentration was higher than calculated for the water-shift reaction at equilibrium. A gasification mechanism is proposed whereby CO{sub 2} is one of the primary gasification products.

Li, J.; van Heiningen, A.R.P. (Dept. of Chemical Engineering, McGill Univ., Pulp and Paper Research Inst. of Canada, Montreal, Quebec (CA))

1991-07-01T23:59:59.000Z

132

WOOD ANATOMY INSTRUCTIONS FOR LABORATORY  

E-Print Network [OSTI]

WOOD ANATOMY INSTRUCTIONS FOR LABORATORY WORK KATARINA CUFAR, MARTIN ZUPANCIC University of Ljubljana Biotechnical Faculty Department of Wood Science and Technology #12;Publisher Department of Wood The publishing of "Wood Anatomy - Instructions for Laboratory Work", a textbook by Katarina Cufar and Martin

Cufar, Katarina

133

WOOD RESEARCH 53 (4): 2008  

E-Print Network [OSTI]

1 WOOD RESEARCH 53 (4): 2008 1-12 CAMBIAL ACTIVITY AND WOOD FORMATION IN BEECH FAGUS SYLVATICA, Department of Wood Science and Technology, Ljubljana, Slovenia Jozica Griar Slovenian Forestry Institute (Fagus sylvatica), cambium, wood formation, cell differentiation, xylem growth rings, Gompertz function

Cufar, Katarina

134

WOOD RESEARCH 52 (2): 2007  

E-Print Network [OSTI]

1 WOOD RESEARCH 52 (2): 2007 1-10 WOOD FORMATION IN NORWAY SPRUCE PICEA ABIES STUDIED BY PINNING Zupani, Katarina Cufar, Primoz Oven University of Ljubljana, Biotechnical Faculty, Department of Wood methods for examining wood formation. Pinning induced desiccation of differentiated xylem, necrosis

Cufar, Katarina

135

Utilization of Agricultural WasteUtilization of Agricultural Waste for Composite Panelsfor Composite Panels  

E-Print Network [OSTI]

Utilization of Agricultural WasteUtilization of Agricultural Waste for Composite Panelsfor Composite Panels Chung Y. HseChung Y. Hse Principal Wood ScientistPrincipal Wood Scientist USDA Forest State UniversityLouisiana State University 66thth Pacific Rim BioPacific Rim Bio--Based Composites

136

James F. Wood  

Broader source: Energy.gov [DOE]

James F. Wood is currently Deputy Assistant Secretary for Clean Coal in the Office of Fossil Energy (FE). In this position, he is responsible for the management and direction of the Office's...

137

Wood Heating Fuel Exemption  

Broader source: Energy.gov [DOE]

This statute exempts from the state sales tax all wood or "refuse-derived" fuel used for heating purposes. The law does not make any distinctions about whether the qualified fuels are used for...

138

Wood/coal cofiring in industrial stoker boilers  

SciTech Connect (OSTI)

Realizing that a significant reduction in the global emissions of fossil carbon dioxide may require the installation of a wide variety of control technologies, options for large and small boilers are receiving attention. With over 1,500 coal-fired stoker boilers in the US, biomass co-firing is of interest, which would also open markets for waste wood which is presently landfilled at significant costs ranging from $20--200/ton. While much cofiring occurs inside the fence, where industrial firms burn wastes in their site boilers, other opportunities exist. Emphasis has been placed on stoker boilers in the northeastern US, where abundant supplies of urban wood waste are generally known to exist. Broken pallets form a significant fraction of this waste. In 1997, the cofiring of a volumetric mixture of 30% ground broken pallet material and 70% coal was demonstrated successfully at the traveling-grate stoker boilerplant of the Pittsburgh Brewing Company. Fourteen test periods, with various wood/coal mixtures blended on site, and two extended test periods, using wood/coal mixtures blended at the coal terminal and transported by truck to the brewery, were conducted. The 30% wood/70% coal fuel was conveyed through the feed system without difficulty, and combusted properly on the grate while meeting opacity requirements with low SO{sub 2} and NO{sub x} emissions. Efforts are underway to commercialize a wood/coal blend at the brewery, to identify specific urban wood supplies in the Pittsburgh region and to conduct a demonstration at a spreader stoker.

Cobb, J.T. Jr.; Elder, W.W.; Freeman, M.C.

1999-07-01T23:59:59.000Z

139

Simultaneous and rapid determination of multiple component concentrations in a Kraft liquor process stream  

DOE Patents [OSTI]

The present invention is a rapid method of determining the concentration of the major components in a chemical stream. The present invention is also a simple, low cost, device of determining the in-situ concentration of the major components in a chemical stream. In particular, the present invention provides a useful method for simultaneously determining the concentrations of sodium hydroxide, sodium sulfide and sodium carbonate in aqueous kraft pulping liquors through use of an attenuated total reflectance (ATR) tunnel flow cell or optical probe capable of producing a ultraviolet absorbency spectrum over a wavelength of 190 to 300 nm. In addition, the present invention eliminates the need for manual sampling and dilution previously required to generate analyzable samples. The inventive method can be used in Kraft pulping operations to control white liquor causticizing efficiency, sulfate reduction efficiency in green liquor, oxidation efficiency for oxidized white liquor and the active and effective alkali charge to kraft pulping operations.

Li, Jian (Marietta, GA); Chai, Xin Sheng (Atlanta, GA); Zhu, Junyoung (Marietta, GA)

2008-06-24T23:59:59.000Z

140

E-Print Network 3.0 - alkaline black liquor Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

by Explorit Topic List Advanced Search Sample search results for: alkaline black liquor Page: << < 1 2 3 4 5 > >> 1 Journal of Membrane Science, 33 (1987) 83-95 Elsevier Science...

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

A comprehensive program to develop correlations for the physical properties of Kraft black liquor. Interim report No. 3  

SciTech Connect (OSTI)

The black liquor properties program has been conducted over this last period so as to systematically collect data on properties, liquor composition, and lignin characteristics very carefully by methods that have developed during this program. Complete data has been collected for Slash Pine black liquors made by experimental pulping at different pulping conditions. In addition, data has been collected for mill liquors and partial properties or composition data has been collected on Slash Pine black liquors. Data reduction methods have been developed or extended for correlation of viscosity, heat capacity, heat of dilution, and density. Correlation of properties to pulping conditions and of composition to. pulping conditions has begun. In most cases, data reduction methods have been developed that are fundamentally based and that have been shown to be generally applicable to all black liquors. In the near future, we fully expect to accomplish our goal of developing generalized correlations relating physical properties of Slash Pine kraft black liquors to liquor composition. This interim report reviews the methods used, describes examples of data reduction methods that have been developed, and presents some preliminary results for correlation of liquor composition and properties to pulping conditions for Slash Pine black liquors.

Fricke, A.L.; Dong, D.J.; Schmidl, G.W.; Stoy, M.A.; Zaman, A.A.

1993-09-01T23:59:59.000Z

142

Swelling of kraft black liquor: an understanding of the associated phenomena during pyrolysis  

SciTech Connect (OSTI)

The objectives of this thesis were to quantify the swelling of black liquor during pyrolysis in a nitrogen atmosphere and to determine what factors were responsible for swelling. The first part of the investigation studied the process variables: pyrolysis temperature, solid content, heating rate and particle size. A temperature of 500/sup 0/C resulted in maximum swelling for the investigated temperature range of 300-900/sup 0/C. The swelling of black liquor occurred during the evolution of pyrolysis gases; however, there was no correlation found between the amount of pyrolysis gases evolved and the change in char volume. The initial solid content of black liquor had a small influence on the swelling of black liquor. The heating rate was found to effect the rate of swelling but not the final volume. Particle size had no effect on the swollen volume per unit particle weight. The effect of black liquor composition was studied. An interaction between sugar acids and kraft lignin was responsible for swelling. The extractives interfered with the swelling mechanism of black liquor, while inorganic salts acted as a diluent. The swelling behavior of black liquor appeared to be dictated by the surface active and viscous forces present in black liquor during pyrolysis. Surface active forces were evidenced by the formation of small bubbles (50-150 microns in diameter) which appeared necessary for highly swollen chars. Low swelling chars did not exhibit this phenomenon. Bubble formation began at 250/sup 0/C, which closely corresponded to the thermal decomposition temperature of sugar acids. The sugar acids formed bubbles when pyrolyzed but did not swell significantly during pyrolysis. Kraft lignin appeared to enhance the swelling of the sugar acids by increasing the viscosity and stabilizing the bubbles during pyrolysis.

Miller, P.T.

1986-01-01T23:59:59.000Z

143

Wye Wood: the wider wood : A project description and evaluation page 1 January 2007  

E-Print Network [OSTI]

Wye Wood: the wider wood : A project description and evaluation page 1 January 2007 Wye Wood: the wider wood A project description and evaluation Report written by: Dr Frances Howie Associate Director Parrott Health Development Worker, Wye Wood: the wider wood #12;Wye Wood: the wider wood : A project

144

Fuel nitrogen release during black liquor pyrolysis; Part 1: Laboratory measurements at different conditions  

SciTech Connect (OSTI)

Fuel nitrogen release during black liquor pyrolysis is high. There is only minor release during the drying stage. Ammonia is the main fixed nitrogen species formed. The rate of fixed nitrogen release increases with increasing temperature. The level of fixed nitrogen released by birch liquor is almost twice the level for pine liquor. Assuming complete conversion to NO, fixed nitrogen yields gave NO concentrations near typically measured values for flue gases in full scale recovery boilers. The purpose of this work was to gain more detailed information about the behavior of the fuel nitrogen in black liquor combustion. The work focused on the pyrolysis or devolatilization of the combustion process. Devolatilization is the stage at which the majority (typically 50--80%) of the liquor organics release from a fuel particle or droplet as gaseous species due to the rapid destruction of the organic macromolecules in the liquor. In this paper, the authors use the terms devolatilization and pyrolysis interchangeably with no difference in their meaning.

Aho, K.; Vakkilainen, E. (A. Ahistrom Corp., Varkaus (Finland)); Hupa, M. (Abo Akademi Univ., Turku (Finland). Chemical Engineering Dept.)

1994-05-01T23:59:59.000Z

145

Waste wood processing and combustion for energy  

SciTech Connect (OSTI)

This volume contains the proceedings of the Fifth Annual National Biofuels Conference and Exhibition held October 19--22, 1992 in Newton, Massachusetts. Individual papers have been abstracted and indexed for the database.

Not Available

1992-12-31T23:59:59.000Z

146

Alkali salt ash formation during black liquor combustion at kraft recovery boilers  

SciTech Connect (OSTI)

Recovery boiler is an essential part of paper pulping process, where waste sludge called black liquor is burned for chemical recovery and energy production. This study was carried out at an operating industrial recovery boiler in Finland. Measurement of aerosol particles was carried out at bullnose level of furnace, at boiler exit, and at outlet of electrostatic precipitator (ESP). Aerosol mass size distributions in size range 0.02--50 {micro}m were measured with Berner type low pressure impactor (BLPI) operated with precyclone. BLPI samples were further analyzed with ion chromatography for water soluble Na, K, SO{sub 4}, and Cl. Particle morphology was studied with scanning electron microscopy (SEM). Phase composition of crystalline salts was measured with X-ray diffraction (XRD). Particles larger than 1 {micro}m were analyzed with computer controlled scanning electron microscopy (CCSEM) to derive particle composition classes. At ESP inlet mass size distribution was bimodal with a major mode at about 1.2 {micro}m and a minor mode at about 5 {micro}m (aerodynamic diameter). At ESP outlet the mass size distribution showed only one peak at about 1.2 {micro}m. Both submicron and supermicron particles were agglomerates formed from 0.3 to 0.5 {micro}m spherical primary particles. XRD analyses indicated that particles were crystalline with two phases of Na{sub 2}SO{sub 4} (thenardite and sodium sulphate) and K{sub 3}Na(SO{sub 4}){sub 2}. CCSEM results of individual particles larger than 1 {micro}m showed that 79 to 88 volume percent of particles contained mainly Na and S, 7 to 10 volume percent Na, K, and S with minor amount of particles containing Na, S, and Ca.

Mikkanen, P. Kauppinen, E.I.; Pyykoenen, J.; Jokiniemi, J.K. [VTT (Finland); Maekinen, M. [Finnish Meterological Inst., Helsinki (Finland)

1996-12-31T23:59:59.000Z

147

Precision wood particle feedstocks  

DOE Patents [OSTI]

Wood particles having fibers aligned in a grain, wherein: the wood particles are characterized by a length dimension (L) aligned substantially parallel to the grain, a width dimension (W) normal to L and aligned cross grain, and a height dimension (H) normal to W and L; the L.times.H dimensions define two side surfaces characterized by substantially intact longitudinally arrayed fibers; the W.times.H dimensions define two cross-grain end surfaces characterized individually as aligned either normal to the grain or oblique to the grain; the L.times.W dimensions define two substantially parallel top and bottom surfaces; and, a majority of the W.times.H surfaces in the mixture of wood particles have end checking.

Dooley, James H; Lanning, David N

2013-07-30T23:59:59.000Z

148

Marketing of Tropical Hardwood Wood Products from Ghana  

E-Print Network [OSTI]

productive · Causes: farming, bush fires, fuel wood, wasteful logging practices, mining and quarrying #12;Fuelwood #12;Current Industry Structure · 8% of GDP · 250 companies involved in primary operations · 180 companies in secondary operations · Over 200 companies involved in tertiary operations · General

149

Pellet Production Wood Pellets are made by compressing  

E-Print Network [OSTI]

Pellet Production Wood Pellets are made by compressing clean dry sawdust, under very high pressure into a pellet as it cools. The material used for producing pellets usually comes from industries who are already pellets reduces the volume of material they have to treat as waste, reducing landfill. Pellets have

150

Research on droplet formation for application to kraft black liquors: Final report: Tasks I and III, report No. 4  

SciTech Connect (OSTI)

The overall objective of this project is to generate technical data with which to design nozzles for kraft black liquor recovery boilers which can reduce under and over size droplets and adjust for changing black liquor properties and production requirements. The research is organized into five tasks: Droplet formation from a single jet, theoretical and experimental--ambient gas medium; Surface tensions of black liquor; Aerodynamic/hydrodynamic stability/instability of droplets once formed; Black liquor droplet formation from a single jet--furnace gas medium; Prototype of a new nozzle design. 88 figs.

Stockel, I.H.

1988-10-01T23:59:59.000Z

151

Inaugural 2012 Kristie Ann Wood  

E-Print Network [OSTI]

Inaugural 2012 Kristie Ann Wood Scholarship Award Call for Nominations We are delighted to announce the Inaugural 2012 Kristie Ann Wood Scholarship Award for an Outstanding Women's, Gender, and Sexualities (WGSS Wood, a feminist mother, wife, friend, daughter, and lawyer who is remembered by her loved ones

Alpay, S. Pamir

152

April, 2006 Allen W. Wood  

E-Print Network [OSTI]

1 April, 2006 Vita Allen W. Wood Academic Address: Philosophy Department, Bldg 90 Stanford University Stanford, CA 94305-2155 Telephone 650-723-2587 Fax 650-723-0985 E-mail: Allen.Wood University, 1999-2000. Professor of Philosophy, Stanford University, 1999-2001 Ward W. and Priscilla B. Woods

Zalta, Edward N.

153

Environmental Impacts of Treated Wood  

E-Print Network [OSTI]

Environmental Impacts of Treated Wood 6495_C000.fm Page iii Wednesday, February 1, 2006 5:48 PM #12 of treated-wood research and their efforts in organizing the con- ference entitled Environmental Impacts, "Environmental Impacts of Treated Wood", the conference proceedings which served as a starting point

Florida, University of

154

Rheological Model for Wood  

E-Print Network [OSTI]

Wood as the most important natural and renewable building material plays an important role in the construction sector. Nevertheless, its hygroscopic character basically affects all related mechanical properties leading to degradation of material stiffness and strength over the service life. Accordingly, to attain reliable design of the timber structures, the influence of moisture evolution and the role of time- and moisture-dependent behaviors have to be taken into account. For this purpose, in the current study a 3D orthotropic elasto-plastic, visco-elastic, mechano-sorptive constitutive model for wood, with all material constants being defined as a function of moisture content, is presented. The corresponding numerical integration approach, with additive decomposition of the total strain is developed and implemented within the framework of the finite element method (FEM). Moreover to preserve a quadratic rate of asymptotic convergence the consistent tangent operator for the whole model is derived. Functionality and capability of the presented material model are evaluated by performing several numerical verification simulations of wood components under different combinations of mechanical loading and moisture variation. Additionally, the flexibility and universality of the introduced model to predict the mechanical behavior of different species are demonstrated by the analysis of a hybrid wood element. Furthermore, the proposed numerical approach is validated by comparisons of computational evaluations with experimental results.

Mohammad Masoud Hassani; Falk K. Wittel; Stefan Hering; Hans J. Herrmann

2014-10-15T23:59:59.000Z

155

Physical properties of kraft black liquor: Summary report, Phases 1 and 2  

SciTech Connect (OSTI)

Since 1981, a research program has been in progress to determine the physical properties of kraft black liquors and to develop methods for reduction of data and correlation of properties with pumping conditions. The basic premise that has been used to direct the research program is that kraft black liquor behaves as a polymer solution, particularly at high solids, and that the behavior is dominated by the characteristics of the lignin present. This premise is proving to be correct, and the principles that follow from this premise are proving to be successful for data reduction and correlation. The research has been a complex program involving experimental pulping, chemical analysis, lignin separation and characterization, thermal analysis, rheological measurements, and considerable equipment and methods development. Due to the complexity of the program, the unforeseen need to expend a great deal of effort in development of experimental techniques for analysis, and the fact that our liquors proved to be unstable at high temperatures and solids, all of the original objectives could not be accomplished. However, our program has added substantially to the body of knowledge of physical properties of black liquor. Our results indicate that the goal of developing correlations for physical properties of kraft black liquor is practical and can be realized through extension of the present work.

Fricke, A.L.

1987-09-01T23:59:59.000Z

156

Improved Materials for High-Temperature Black Liquor Gasification  

SciTech Connect (OSTI)

The laboratory immersion test system built and operated at ORNL was found to successfully screen samples from numerous refractory suppliers, including both commercially available and experimental materials. This system was found to provide an accurate prediction of how these materials would perform in the actual gasifier environment. Test materials included mullites, alumino-silicate bricks, fusion-cast aluminas, alumina-based and chrome-containing mortars, phosphate-bonded mortars, coated samples provided under an MPLUS-funded project, bonded spinels, different fusion-cast magnesia-alumina spinels with magnesia content ranging from 2.5% to about 60%, high-MgO castable and brick materials, spinel castables, and alkali-aluminate materials. This testing identified several candidate material systems that perform well in the New Bern gasifier. Fusion-cast aluminas were found to survive for nearly one year, and magnesia-alumina spinels have operated successfully for 18 months and are expected to survive for two years. Alkali-aluminates and high-MgO-content materials have also been identified for backup lining applications. No other material with a similar structure and chemical composition to that of the fusion-cast magnesium-aluminum spinel brick currently being used for the hot-face lining is commercially available. Other materials used for this application have been found to have inferior service lives, as previously discussed. Further, over 100 laboratory immersion tests have been performed on other materials (both commercial and experimental), but none to date has performed as well as the material currently being used for the hot-face lining. Operating experience accumulated with the high-temperature gasifier at New Bern, North Carolina, has confirmed that the molten alkali salts degrade many types of refractories. Fusion-cast alumina materials were shown to provide a great improvement in lifetime over materials used previously. Further improvement was realized with fusion-cast magnesia-alumina spinel refractory, which appears to be the most resistant to degradation found to date, exhibiting over a year of service life and expected to be capable of over two years of service life. Regarding the use of refractory mortar, it was found that expansion of the current chrome-alumina mortar when subjected to black liquor smelt is likely contributing to the strains seen on the vessel shell. Additionally, the candidate high-alumina mortar that was originally proposed as a replacement for the current chrome-alumina mortar also showed a large amount of expansion when subjected to molten smelt. A UMR experimental mortar, composed of a phosphate bonded system specifically designed for use with fusion-cast magnesium-aluminum spinel, was found to perform well in the molten smelt environment. Strain gauges installed on the gasifier vessel shell provided valuable information about the expansion of the refractory, and a new set of strain gauges and thermocouples has been installed in order to monitor the loading caused by the currently installed spinel refractory. These results provide information for a direct comparison of the expansion of the two refractories. Measurements to date suggest that the fusion-cast magnesia-alumina spinel is expanding less than the fusion-cast {alpha}/{beta}-alumina used previously. A modified liquor nozzle was designed and constructed to test a number of materials that should be more resistant to erosion and corrosion than the material currently used. Inserts made of three erosion-resistant metallic materials were fabricated, along with inserts made of three ceramic materials. The assembled system was sent to the New Bern mill for installation in the gasifer in 2005. Following operation of the gasifier using the modified nozzle, inserts should be removed and analyzed for wear by erosion/corrosion. Although no materials have been directly identified for sensor/thermocouple protection tubes, several of the refractory material systems identified for lining material applications may be applicable for use in this

Keiser, J.R.; Hemrick, J.G.; Gorog, J.P.; Leary, R.

2006-06-29T23:59:59.000Z

157

Oil palm vegetation liquor: a new source of phenolic bioactives  

E-Print Network [OSTI]

Waste from agricultural products represents a disposal liability, which needs to be addressed. Palm oil is the most widely traded edible oil globally, and its production generates 85 million tons of aqueous by-products ...

Sambandan, T. G.

158

Investigation of Pressurized Entrained-Flow Kraft Black Liquor Gasification in an Industrially Relevant Environment  

SciTech Connect (OSTI)

The University of Utah's project 'Investigation of Pressurized Entrained-Flow Kraft Black Liquor Gasification in an Industrially Relevant Environment' (U.S. DOE Cooperative Agreement DE-FC26-04NT42261) was a response to U.S. DOE/NETL solicitation DE-PS36-04GO94002, 'Biomass Research and Development Initiative' Topical Area 4-Kraft Black Liquor Gasification. The project began September 30, 2004. The objective of the project was to improve the understanding of black liquor conversion in high pressure, high temperature reactors that gasify liquor through partial oxidation with either air or oxygen. The physical and chemical characteristics of both the gas and condensed phase were to be studied over the entire range of liquor conversion, and the rates and mechanisms of processes responsible for converting the liquor to its final smelt and syngas products were to be investigated. This would be accomplished by combining fundamental, lab-scale experiments with measurements taken using a new semi-pilot scale pressurized entrained-flow gasifier. As a result of insufficient availability of funds and changes in priority within the Office of Biomass Programs of the U.S. Department of Energy, the research program was terminated in its second year. In total, only half of the budgeted funding was made available for the program, and most of this was used during the first year for construction of the experimental systems to be used in the program. This had a severe impact on the program. As a consequence, most of the planned research was unable to be performed. Only studies that relied on computational modeling or existing experimental facilities started early enough to deliver useful results by the time to program was terminated Over the course of the program, small scale (approx. 1 ton/day) entrained-flow gasifier was designed and installed at the University of Utah's off-campus Industrial Combustion and Gasification Research Facility. The system is designed to operate at pressures as high as 32 atmospheres, and at temperatures as high as 1500 C (2730 F). Total black liquor processing capacity under pressurized, oxygen-blown conditions should be in excess of 1 ton black liquor solids per day. Many sampling ports along the conversion section of the system will allow detailed analysis of the environment in the gasifier under industrially representative conditions. Construction was mostly completed before the program was terminated, but resources were insufficient to operate the system. A system for characterizing black liquor sprays in hot environments was designed and constructed. Silhouettes of black liquor sprays formed by injection of black liquor through a twin fluid (liquor and atomizing air) nozzle were videoed with a high-speed camera, and the resulting images were analyzed to identify overall characteristics of the spray and droplet formation mechanisms. The efficiency of liquor atomization was better when the liquor was injected through the center channel of the nozzle, with atomizing air being introduced in the annulus around the center channel, than when the liquor and air feed channels were reversed. Atomizing efficiency and spray angle increased with atomizing air pressure up to a point, beyond which additional atomizing air pressure had little effect. Analysis of the spray patterns indicates that two classifications of droplets are present, a finely dispersed 'mist' of very small droplets and much larger ligaments of liquor that form at the injector tip and form one or more relatively large droplets. This ligament and subsequent large droplet formation suggests that it will be challenging to obtain a narrow distribution of droplet sizes when using an injector of this design. A model for simulating liquor spray and droplet formation was developed by Simulent, Inc. of Toronto. The model was able to predict performance when spraying water that closely matched the vendor specifications. Simulation of liquor spray indicates that droplets on the order 200-300 microns can be expected, and that higher liquor flow will result in be

Kevin Whitty

2008-06-30T23:59:59.000Z

159

Formation of fuel NO[sub x] during black-liquor combustion  

SciTech Connect (OSTI)

Fuel NOx and thermal NOx were measured in combustion gases from black liquors in two laboratory furnaces. Combustion at 950 C in air (8% O[sub 2]) produced NOx concentrations of 40-80ppm. Combustion at 950 C in synthetic air containing no nitrogen (21% 0[sub 2] in Ar) produced the same result, demonstrating that all of the NOx produced during combustion at 950 C was fuel NOx. Formation of fuel NOx increased moderately with increasing temperature in the range of 800-1,000 C, but temperature sensitivity of fuel NOx was much less than that of thermal NOx. The results imply that the major source of NOx in recovery furnace emissions is the fuel NOx in recovery furnace formed by conversion of liquor-bound nitrogen during combustion. This is consistent with thermal NOx theory, which postulates that black-liquor combustion temperatures are too low to generate significant amounts of thermal NOx.

Nichols, K.M. (Weyerhaeuser Paper Co., Tacoma, WA (United States)); Lien, S.J. (Inst. of Paper Science and Technology, Atlanta, GA (United States))

1993-03-01T23:59:59.000Z

160

Research on droplet formation for application to kraft black liquors---Final project report  

SciTech Connect (OSTI)

The objective of this project was to generate technical data to guide the design of new nozzles for kraft black liquor recovery boilers. The goal of new nozzle designs would be to narrow the droplet size distribution compared to current nozzles and to adjust for changing black liquor properties and production requirements. Uniform droplets in a recovery boiler should reduce fouling of superheater tubes and caused a more efficient burning of the black liquor, both of which result in improved energy efficiency. The research was organized into five tasks which are described in the next chapter. This fifth and final project report contains the details of Task 4 and 5 and further analysis of Task 1 results. The details of the other tasks are reported in previous technical reports. The major results from the entire project are highlighted in this section in order of significance.

Bousfield, D.W.

1990-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

A comprehensive program to develop correlations for the physical properties of Kraft black liquor. Interim report No. 2  

SciTech Connect (OSTI)

Experimental effort for the program to evaluate physical properties of kraft black liquors is now proceeding well. Experimental work includes pulping, liquor analysis, lignin purification and characterization, vapor-liquid equilibria, heat capacity, heats of solution and combustion, and viscosity measurements. Measurement of thermal conductivity has not yet begun. Collection of the data necessary for development of generalized correlations is proceeding, but will require about two more years. The digester is operating very well. It is now possible to operate the digester as a closed, rotating reactor or as a batch reactor with liquor circulation. When operated with liquor circulation, temperatures within the chip bed can be monitored during cooking. Cooking is reproducible, and cooks are being performed to produce liquors for experimental studies. The digester could be further modified to permit us to conduct rapid exchange batch pulping or to permit us to simulate continuous pulping. Liquors to be used in experimental studies are concentrated in our large scale evaporator or in our small scale evaporator. The large scale evaporator is used to concentrate liquors to about 50% solids for storage and for use in studies requiring high solids liquors. The small scale evaporator is used for preparing final samples to as high as 85% solids and for measuring vapor-liquid equilibria. Liquors are now routinely analyzed to determine all components, except higher molecular weight organic acids and extractives. Lignin determination by uv-visible means has been improved. Lignin purification from black liquor has been improved and lignin molecular weights are determined routinely. Work on lignin molecular weight distribution is still not satisfactory, but recent developments holds promise.

Fricke, A.L.

1990-12-01T23:59:59.000Z

162

High-solids black liquor firing in pulp and paper industry kraft recovery boilers. Quarterly report, Phase 1a: Black liquor gasifier evaluation  

SciTech Connect (OSTI)

This project phase addresses the following workscope: Conduct bench-scale tests of a low temperature, partial combustion gasifier; Prepare a gasifier pilot-plant preliminary design and cost estimate and prepare a budgetary cost estimate of the balance of the program; Outline a test program to evaluate gasification; Prepare an economic/market analysis of gasification and solicit pulp and paper industry support for subsequent phases; and Prepare a final report and conduct a project review prior to commencement of work leading to construction of any pilot scale components or facilities. The primary accomplishments included completion of installation of the bench-scale black liquor gasifier and supporting systems, preparing test plans and related safety procedures and detailed operating procedures, defining the functional design requirements and outlining the test plans for the pilot-scale gasifier, and preparing a preliminary economic assessment of the black liquor gasifier. This work accomplished under Phase 1a during this period is further described by task.

NONE

1996-07-01T23:59:59.000Z

163

Review and Status of Solid Waste Management Practices in Multan, Pakistan  

E-Print Network [OSTI]

Bones Metals Textile Wood Composting Community Developmentestablished a solid waste composting plant as a theme ofwaste sorting and composting plant, which was manufactured

Shoaib, Muhammad; Mirza, Umar Karim; Sarwar, Muhammad Avais

2006-01-01T23:59:59.000Z

164

Balsa Wood Bridge Competition Sponsored by  

E-Print Network [OSTI]

Balsa Wood Bridge Competition Sponsored by: The University of Tennessee, Department of Civil only of BALSA WOOD and ELMER'S WOOD GLUE. No other materials will be accepted. The balsa wood must be no larger than ¼" high and ¼" wide. Any dowels can not have a diameter greater than ¼". Balsa wood comes

Wang, Xiaorui "Ray"

165

SOME POV-RAY TEXTURES AND COLORS T_Wood1 to T_Wood35  

E-Print Network [OSTI]

SOME POV-RAY TEXTURES AND COLORS WOODS.INC T_Wood1 to T_Wood35 STONES.INC T_Stone1 to T_Stone44Pink DarkPurple NeonBlue CoolCopper MandarinOrange LightWood MediumWood DarkWood SpicyPink Semi

Lee, Carl

166

Energy conservation in black-liquor evaporator of pulp and paper industry  

SciTech Connect (OSTI)

This paper is an attempt on energy conservation in a quintuple effect evaporator used to concentrate dilute black liquor solution by raising their steam economy through the changes in the operating variables. It also describes the steam economy of the evaporator for the various feed arrangements so as to determine the ranges of the variables for which evaporation occurs profitable.

Agarwal, V.K.; Gupta, S.C. [Univ. of Roorkee (India). Dept. of Chemical Engineering

1995-12-31T23:59:59.000Z

167

Assessment of the release of atomic Na from a burning black liquor droplet using quantitative PLIF  

SciTech Connect (OSTI)

The quantitative measurement of atomic sodium (Na) release, at high concentration, from a burning black liquor droplet has been demonstrated using a planar laser-induced fluorescence (PLIF) technique, corrected for fluorescence trapping. The local temperature of the particle was measured to be approximately 1700 C, at a height of 10 mm above a flat flame burner. The PLIF technique was used to assess the temporal release of atomic Na from the combustion of black liquor and compare it with the Na concentration in the remaining smelt. A first-order model was made to provide insight using a simple Plug Flow Reactor model based on the independently measured concentration of residual Na in the smelt as a function of time. This model also required the dilution ratio of the combustion products in the flat flame entrained into the plume gas from the black liquor particle to be estimated. The key findings of these studies are: (i) the peak concentration of atomic Na from the combustion of the black liquor droplets is around 1.4 ppm; (ii) very little atomic Na is present during the drying, devolatilisation or char combustion stages; and (iii) the presence of atomic Na during smelt phase dominates over that from the other combustion stages. (author)

Saw, Woei L.; Nathan, Graham J. [Centre for Energy Technology, The Environment Institute, School of Mechanical Engineering, The University of Adelaide, SA 5005 (Australia); Ashman, Peter J.; Alwahabi, Zeyad T. [Centre for Energy Technology, The Environment Institute, School of Chemical Engineering, The University of Adelaide, SA 5005 (Australia)

2009-07-15T23:59:59.000Z

168

Final technical report. In-situ FT-IR monitoring of a black liquor recovery boiler  

SciTech Connect (OSTI)

This project developed and tested advanced Fourier transform infrared (FT-IR) instruments for process monitoring of black liquor recovery boilers. The state-of-the-art FT-IR instruments successfully operated in the harsh environment of a black liquor recovery boiler and provided a wealth of real-time process information. Concentrations of multiple gas species were simultaneously monitored in-situ across the combustion flow of the boiler and extractively at the stack. Sensitivity to changes of particulate fume and carryover levels in the process flow were also demonstrated. Boiler set-up and operation is a complex balance of conditions that influence the chemical and physical processes in the combustion flow. Operating parameters include black liquor flow rate, liquor temperature, nozzle pressure, primary air, secondary air, tertiary air, boiler excess oxygen and others. The in-process information provided by the FT-IR monitors can be used as a boiler control tool since species indicative of combustion efficiency (carbon monoxide, methane) and pollutant emissions (sulfur dioxide, hydrochloric acid and fume) were monitored in real-time and observed to fluctuate as operating conditions were varied. A high priority need of the U.S. industrial boiler market is improved measurement and control technology. The sensor technology demonstrated in this project is applicable to the need of industry.

James Markham; Joseph Cosgrove; David Marran; Jorge Neira; Chad Nelson; Peter Solomon

1999-05-31T23:59:59.000Z

169

Black liquor viscosity reduction through salt additives: A novel environmentally benign processing alternative  

SciTech Connect (OSTI)

Processing black liquor at high solids would reduce SO{sub x} emissions, facilitate the use of non-chlorine bleaching techniques and enhance the energy efficiency of the pulping process. However, black liquor exhibits and exponential increase in viscosity as its solids content rises, thus hindering its processability in the composition range of interest (>70% solids). In this study, we present a new approach for controlling viscosity at high solids content by {open_quotes}salting in{close_quotes} black liquor through addition of thiocyanate salts. These salts increases the solubility of the polymer constituents in black liquor leading to a decrease in its viscosity. Several salts capable of viscosity reduction by as much as two orders of magnitude have been identified. The effects of cation size, solution pH and temperature on viscosity reduction is presented and interpreted in terms of the underlying principles of {open_quotes}salting in{close_quotes} and how it affects aqueous solution structure.

Roberts, J.E.; Khan, S.A.; Spontak, R.J. [North Carolina State Univ., Raleigh, NC (United States)

1996-10-01T23:59:59.000Z

170

Generator-Absorber heat exchange transfer apparatus and method using an intermediate liquor  

DOE Patents [OSTI]

Numerous embodiments and related methods for generator-absorber heat exchange (GAX) are disclosed, particularly for absorption heat pump systems. Such embodiments and related methods use the working solution of the absorption system for the heat transfer medium where the working solution has an intermediate liquor concentration.

Phillips, Benjamin A. (Benton Harbor, MI); Zawacki, Thomas S. (St. Joseph, MI)

1996-11-05T23:59:59.000Z

171

Separation of kraft lignin from kraft black liquor: Final report, July 1984-April 1987  

SciTech Connect (OSTI)

All the objectives were accomplished: a high-quality kraft lignin containing less than 50 ppM sodium was separated into a solvent phase (freon) from as much as 1000 lb kraft black liquor. Supporting data (infrared spectra, chemical analyses, etc.) are included. (DLC)

Kurple, K.R.

1988-04-15T23:59:59.000Z

172

BIOMASS AND BLACK LIQUOR GASIFIER/GAS TURBINE COGENERATION AT PULP AND PAPER MILLS  

E-Print Network [OSTI]

BIOMASS AND BLACK LIQUOR GASIFIER/GAS TURBINE COGENERATION AT PULP AND PAPER MILLS ERIC D. LARSON modeling of gasifier/gas turbine pulp-mill cogeneration systemsusing gasifier designs under commercial gasification. The use of biomass fuels with gas turbines could transform a typical pulp mill from a net

173

DIVISION 6 -WOOD AND PLASTICS 06000 GENERAL  

E-Print Network [OSTI]

DIVISION 6 - WOOD AND PLASTICS ________________________________________________________________________ 06000 GENERAL 1. For both woods and plastics, special attention is called to matters of flame spread-dried. 3. For exterior wood or plastic framed structures, see Division 4 for dimensions of Sample Panel

174

Novel Pulping Technology: Directed Green Liquor Utilization (D-GLU) Pulping  

SciTech Connect (OSTI)

The general objectives of this new project are the same as those described in the original proposal. Conventional kraft pulping technologies will be modified for significant improvements in pulp production, such as strength, bleachability, and yield by using green liquor, a naturally high, kraft mill-derived sulfidity source. Although split white liquor sulfidity and other high sulfidity procedures have the promise of addressing several of the latter important economic needs of pulp mills, they require considerable engineering/capital retrofits, redesigned production methods, and thus add to overall mill expenditures. Green liquor use, however, possesses the required high sulfidity to obtain in general the benefits attributable to higher sulfidity cooking, without the required capital constraints for implementation. Before introduction of green liquor in our industrial operations, a stronger understanding of its fundamental chemical interaction with the lignin and carbohydrates in US hardwood and softwoods must be obtained. In addition, its effect on bleachability, enhancement of pulp properties, and influence on the overall energy and recovery of the mill requires further exploration before the process witnesses widespread mill use in North America. Thus, proof of principle will be accomplished in this work and the consequent effect of green liquor and other high sulfide sources on the pulping and bleaching operations will be explored for US kraft mills. The first year of this project will generate the pertinent information to validate its ability for implementation in US pulping operations, whereas year two will continue this work while proceeding to analyze pulp bleachability and final pulp/paper properties and develop a general economic and feasibility analysis for its eventual implementation in North America.

Lucian A. Lucia

2005-11-15T23:59:59.000Z

175

Black liquor combustion validated recovery boiler modeling, five-year report  

SciTech Connect (OSTI)

The objective of this project was to develop a new computer model of a recovery boiler furnace using a computational fluid dynamics (CFD) code specifically tailored to the requirements for solving recovery boiler flows, and using improved submodels for black liquor combustion based on continued laboratory fundamental studies. The project originated in October 1990 and was scheduled to run for four years. At that time, there was considerable emphasis on developing accurate predictions of the physical carryover of macroscopic particles of partially burnt black liquor and smelt droplets out of the furnace, since this was seen as the main cause of boiler plugging. This placed a major emphasis on gas flow patterns within the furnace and on the mass loss rates and swelling and shrinking rates of burning black liquor drops. As work proceeded on developing the recovery boiler furnace model, it became apparent that some recovery boilers encounter serious plugging problems even when physical carryover was minimal. After the original four-year period was completed, the project was extended to address this issue. The objective of the extended project was to improve the utility of the models by including the black liquor chemistry relevant to air emissions predictions and aerosol formation, and by developing the knowledge base and computational tools to relate furnace model outputs to fouling and plugging of the convective sections of the boilers. The work done to date includes CFD model development and validation, acquisition of information on black liquor combustion fundamentals and development of improved burning models, char bed model development, and model application and simplification.

Grace, T.M.; Frederick, W.J.; Salcudean, M.; Wessel, R.A.

1996-08-01T23:59:59.000Z

176

Combustion processes in black liquor recovery: Analysis and interpretation of combustion rate data and an engineering design model  

SciTech Connect (OSTI)

The overall objective of this project is to develop computational models for predicting the combustion times for black liquor droplets in a recovery furnace environment. These models are needed as an important component of large-scale, global recovery boiler models. The work is divided into two tasks: interpretation of experimental black liquor single droplet combustion data from two laboratories; and formulation and evaluation of computational models for the stages of combustion of black liquor droplets. This report contains the results of the project. 109 refs., 64 figs., 12 tabs.

Fredrick, W.J.

1990-03-01T23:59:59.000Z

177

WRITTEN TESTIMONY OF DR. ROBERT J. WOOD  

E-Print Network [OSTI]

WRITTEN TESTIMONY OF DR. ROBERT J. WOOD DIRECTOR OF THE COOPERATIVE OXFORD LABORATORY NATIONAL Robert Wood, Director of the Cooperative Oxford Laboratory, a cooperative scientific research laboratory

178

The Asian Wood Pellet Markets  

E-Print Network [OSTI]

The Asian Wood Pellet Markets Joseph A. Roos and Allen M. Brackley United States Department Wood Pellet plant in North Pole, Alaska. Clockwise from upper left: pelleting machine; pellets bagged for home use; a Superior Pellet Fuels bag; inventory of product ready for shipment to retailers. Upper

179

GLOBAL WOOD SUPPLY Sten Nilsson  

E-Print Network [OSTI]

GLOBAL WOOD SUPPLY Sten Nilsson Biomass and Resource Efficiency: the need for a supply led approach to forest productivity European Parliament, Brussels, 10 November 2011 #12;MEGATREND WOOD SUPPLY 2020 the trees on the right Source: JP Management Consulting (Asia-Pacific) Ltd., 2006 #12;BAMBOO FOREST Source

180

Wood and Pellet Heating Basics | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energyon ArmedWaste and Materials Disposition InformationWindWood and Pellet Heating Basics

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Fundamental Study of Black Liquor Gasification Kinetics. Quarterly progress report for the period October 1999 to December 1999  

SciTech Connect (OSTI)

The overall objective of this research is to evaluate the kinetics of gasification of kraft black liquor under laboratory conditions simulating pressurized, oxygen-blown gasification. The significant independent variables are gasifier temperature, black liquor composition particle size, and particle residence time. The authors will quantify their impact on the concentration of major and trace gas phase species, as well as the composition of condensed phase inorganic products, including specification of the Na- and S-containing compounds and overall carbon conversion.

NONE

2000-01-31T23:59:59.000Z

182

Wood River Levee Reconstruction, Madison County, IL  

E-Print Network [OSTI]

Wood River Levee Reconstruction, Madison County, IL 25 October 2006 Abstract: The recommended plan provides for flood damage reduction and restores the original degree of protection of the Wood River Levee-federal sponsor is the Wood River Drainage and Levee District. The Wood River Levee System was authorized

US Army Corps of Engineers

183

Original article Growth stresses in tension wood  

E-Print Network [OSTI]

Original article Growth stresses in tension wood: role of microfibrils and lignification T Okuyama the growth stress generation in the region of normal and tension woods. growth stress/ tension wood in normal and ten- sion wood. The compressive stress from the deposition of lignin controls the level

Paris-Sud XI, Université de

184

Successful biomass (wood pellets ) implementation in  

E-Print Network [OSTI]

Successful biomass (wood pellets ) implementation in Estonia Biomass Utilisation of Local of primary energy in Estonia ! Wood fuels production ! Pellet firing projects in Estonia ­ SIDA Demo East Production of wood fuels in Estonia in 2002 Regional Energy Centres in Estonia Wood pellets production

185

Friedman et al. on Eagly & Wood ...1059 Kenrick & Li on Eagly & Wood ......1060  

E-Print Network [OSTI]

Comment Contents Friedman et al. on Eagly & Wood ...1059 Kenrick & Li on Eagly & Wood ......1060 Kleyman on Eagly & Wood ............ 1061 Wood & Eagly reply ....................... 1062 Chan on Peng J. Scheyd University of Texas at Austin Eagly and Wood (June 1999) argued that social structural

Pillow, Jonathan

186

Companies commit to eliminate dodgy wood products Companies commit to eliminate dodgy wood products  

E-Print Network [OSTI]

Companies commit to eliminate dodgy wood products Companies commit to eliminate dodgy wood products wood products only from sustainable managed sources. Canadian paper, pulp and wood company Domtar has. "Companies that seriously commit to responsible wood sourcing can have significant positive impacts on forest

187

UTILIZATION OF ALASKAN SALMON CANNERY WASTE  

E-Print Network [OSTI]

UTILIZATION OF ALASKAN SALMON CANNERY WASTE Marine Biological Laboratory iM0V3Ul953 WOODS HOLE and Wildlife Service, John L. Farley, Director UTILIZATION OP ALASKM SALMON CANlTEaT WASH PAHTS I AHD II, September 1953 #12;#12;UTILIZATION OF AUSKAN SALMON CANNERY WASTE y PART I 1. Possibility of Development

188

Development of viscometers for kraft black liquor. Summary report, Phase 2 and 2A  

SciTech Connect (OSTI)

This report documents the results of the evaluation of the on-line prototype viscometers for kraft black liquors carried out at the Pilot Plant facilities of the University of Florida. The original plan called for the evaluation of five prototype on-line viscometers along with laboratory bench versions. At a later stage in the project an additional experimental prototype under development at Southwest Research Institute was added. The viscometers are evaluated for accuracy and repeatability under varying process conditions, such as black liquor species, solids content, temperature, flow rate, and contaminants, as well as for maintenance and reliability. This document reports extensive results of the evaluations and recommendations for design modifications and for the installation of the instruments in industrial pulping mills for further field evaluations in Phase 3 of the project. The report also documents relevant details of the final design of the pilot flow loop used to support the experiments.

Fricke, A.L.; Crisalle, O.D.

1996-11-01T23:59:59.000Z

189

Comparison of Refractory Performance in Black Liquor Gasifiers and a Smelt Test System  

SciTech Connect (OSTI)

Prior laboratory corrosion studies along with experience at the black liquor gasifier in New Bern, North Carolina, clearly demonstrate that serious material problems exist with the gasifier's refractory lining. Mullite-based and alumina-based refractories used at the New Bern facility suffered significant degradation even though they reportedly performed adequately in smaller scale systems. Oak Ridge National Laboratory's involvement in the failure analysis, and the initial exploration of suitable replacement materials, led to the realization that a simple and reliable, complementary method for refractory screening was needed. The development of a laboratory test system and its suitability for simulating the environment of black liquor gasifiers was undertaken. Identification and characterization of corrosion products were used to evaluate the test system as a rapid screening tool for refractory performance and as a predictor of refractory lifetime. Results from the test systems and pl ants were qualitatively similar.

Peascoe, RA

2001-09-25T23:59:59.000Z

190

Feasibility of black liquor gasification in combined cycle cogeneration. Final report, Phase I  

SciTech Connect (OSTI)

A small-scale test program of 65% solids black liquor gasification was conducted in the bench-scale molten salt gasifier. Nine tests were performed using both air and oxygen as the oxidant. The black liquor gasified readily and the product gas had a dry-basis heating value of 70 Btu/scf with air and about 250 Btu/scf with oxygen. These values were almost identical to values predicted on the basis of thermodynamic equilibrium in the gas phase, indicating that the system had achieved near-equilibrium. However, the reduction of the melt to sodium sulfide was generally low. An independent research program aimed at improving the performance of air-blown black liquor gasification was conducted. That work resulted in a modified gasifier system design which increased the off-gas heating value to 120 Btu/scf and the reduction of the melt to over 95%. This was an improvement that would potentially allow use of the scrubbed product gas as a feed to a combustion gas turbine without prior enrichment.

Kelleher, E.G.

1983-06-30T23:59:59.000Z

191

Combined biomass and black liquor gasifier/gas turbine cogeneration at pulp and paper mills  

SciTech Connect (OSTI)

Kraft pulp and paper mills generate large quantities of black liquor and byproduct biomass suitable for gasification. These fuels are used today for onsite cogeneration of heat and power in boiler/steam turbine systems. Gasification technologies under development would enable these fuels to be used in gas turbines. This paper reports results of detailed full-load performance modeling of pulp-mill cogeneration systems based on gasifier/gas turbine technologies. Pressurized, oxygen-blown black liquor gasification, the most advanced of proposed commercial black liquor gasifier designs, is considered, together with three alternative biomass gasifier designs under commercial development (high-pressure air-blown, low-pressure air-blown, and low-pressure indirectly-heated). Heavy-duty industrial gas turbines of the 70-MW{sub e} and 25-MW {sub e} class are included in the analysis. Results indicate that gasification-based cogeneration with biomass-derived fuels would transform a typical pulp mill into significant power exporter and would also offer possibilities for net reductions in emissions of carbon dioxide relative to present practice.

Larson, E.D.; Kreutz, T.G. [Princeton Univ., NJ (United States). Center for Energy and Environmental Studies; Consonni, S. [Politecnico di Milano, Milan (Italy). Dipt. di Energetica

1999-07-01T23:59:59.000Z

192

Pulsed combustion process for black liquor gasification. Second annual report, [November 1990--February 1992  

SciTech Connect (OSTI)

This second annual report summarizes the work accomplished during the period November 1990 through February 1992 for DOE Cooperative Agreement No. DE-FC05-90CE40893. The overall project objective is to field test an energy-efficient, innovative black liquor recovery system at a significant industrial scale. This is intended to demonstrate the maturity of the technology in an industrial environment and serve as an example to the industry of the safer and more energy-efficient processing technique. The project structure is comprised of three primary activities: process characterization testing, scale-up hardware development, and field testing. The objective of the process characterization testing was to resolve key technical issues regarding the black liquor recovery process that were identified during earlier laboratory verification tests. This was intended to provide a sound engineering data base for the design, construction and testing of a nominal 1.0 TPH integrated black liquor recovery gasifier. The objective of the scale-up hardware development effort was to ensure that key hardware components, in particular the pulse heater module, would perform reliably and safely in the field. Finally, the objective of the field test is to develop an industrial data base sufficient to demonstrate the capabilities and performance of the operating system with respect to thermal efficiency, product quality, fuel handling, system control, reliability and cost. These tests are to provide long-term and continuous operating data at a capacity unattainable in the bench-scale apparatus.

Not Available

1993-02-01T23:59:59.000Z

193

Structure-Infesting Wood-Boring Beetles  

E-Print Network [OSTI]

everal kinds of beetles damage stored wood, structural timbers and other wood products. The tunneling activities E-394 03/06 Structure-Infesting Wood-Boring Beetles John A. Jackman* S *Professor and Extension Entomologist, The Texas A... at these locations. Other signs of an infestation include stained wood or a blistering appearance on the wood surface caused by larvae tunneling just below the surface. Less commonly, immature beetles produce audible rasping or ticking sounds while chewing...

Jackman, John A.

2006-03-28T23:59:59.000Z

194

Integrated Industrial Wood Chip Utilization  

E-Print Network [OSTI]

The sources of supply of wood residues for energy generation are described and the rationale for exploring the potential available from forest harvesting is developed. Details of three industrial-scale projects are presented and the specific...

Owens, E. T.

1984-01-01T23:59:59.000Z

195

Treatment of Wood Preserving Wastewater  

E-Print Network [OSTI]

The wastewater produced by the wood preserving industry presents a difficult problem to treat economically. A review of the literature indicates the size of the industry has limited the pursuit of an orderly and economic solution. Atmospheric...

Reynolds, T. D.; Shack, P. A.

196

Textile Drying Via Wood Gasification  

E-Print Network [OSTI]

TEXTILE DRYING VIA WOOD GASIFICATION Thomas F. ;McGowan, Anthony D. Jape Georgia Institute of Technology Atlanta, Georgia ABSTRACT This project was carried out to investigate the possibility of using wood gas as a direct replacement... for dryers. In addition to the experimental program described above, the DOE grant covered two other major areas. A survey of the textile industry was made to assess the market for gasification equip ment. The major findings were that a large amount...

McGowan, T. F.; Jape, A. D.

1983-01-01T23:59:59.000Z

197

Coextruded Polyethylene and Wood-Flour Composite: Effect of Shell Thickness, Wood Loading, and Core  

E-Print Network [OSTI]

Coextruded Polyethylene and Wood-Flour Composite: Effect of Shell Thickness, Wood Loading, and Core recycled polyethylene and wood-flour composites with core­shell structure were manufactured using a pilot

198

Analysis of Energy-Efficiency Opportunities for the Pulp and Paper Industry in China  

E-Print Network [OSTI]

efficiently utilize black liquor and other waste biomass forbiomass is used and black liquor is converted intoRecovery Falling film black liquor evaporation Black liquor

Kong, Lingbo

2014-01-01T23:59:59.000Z

199

Radioactive Waste Radioactive Waste  

E-Print Network [OSTI]

#12;Radioactive Waste at UF Bldg 831 392-8400 #12;Radioactive Waste · Program is designed to;Radioactive Waste · Program requires · Generator support · Proper segregation · Packaging · labeling #12;Radioactive Waste · What is radioactive waste? · Anything that · Contains · or is contaminated

Slatton, Clint

200

Improved Materials for Use as Components in Kraft Black Liquor Recovery Boilers  

SciTech Connect (OSTI)

This Cooperative Research and Development Agreement (CRADA) was undertaken to evaluate current and improved materials and materials processing conditions for use as components in kraft black liquor recovery boilers and other unit processes. The main areas addressed were: (1) Improved Black Liquor Nozzles, (2) Weld Overlay of Composite Floor Tubes, and (3) Materials for Lime Kilns. Iron aluminide was evaluated as an alternate material for the nozzles used to inject an aqueous solution known as black liquor into recovery boilers as well for the uncooled lining in the ports used for the nozzles. Although iron aluminide is known to have much better sulfidation resistance in gases than low alloy and stainless steels, it did not perform adequately in the environment where it came into contact with molten carbonate, sulfide and sulfate salts. Weld overlaying carbon steel tubes with a layer of stainless weld metal was a proposed method of extending the life of recovery boiler floor tubes that have experienced considerable fireside corrosion. After exposure under service conditions, sections of weld overlaid floor tubes were removed from a boiler floor and examined metallographically. Examination results indicated satisfactory performance of the tubes. Refractory-lined lime kilns are a critical component of the recovery process in kraft pulp mills, and the integrity of the lining is essential to the successful operation of the kiln. A modeling study was performed to determine the cause of, and possible solutions for, the repeated loss of the refractory lining from the cooled end of a particular kiln. The evaluation showed that the temperature, the brick shape and the coefficient of friction between the bricks were the most important parameters influencing the behavior of the refractory lining.

Keiser, J.R.

2001-10-22T23:59:59.000Z

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Effect of pulsations on black liquor gasification. Progress report, July--September 1995  

SciTech Connect (OSTI)

The objective of this study is to investigate the use of pulse combustion to provide the energy required for the endothermic gasification of black liquor in a fluidized bed. In this process it is critical that the temperature remain in the small window above the gasification temperature but below the smelting temperature of the inorganic salts in the black liquor. Pulse combustors have been shown to have high heat transfer rates between the hot combustion products and the combustor tailpipe. Similarly, fluidized beds have high heat transfer rates within the bed itself, promoting temperature uniformity throughout. Typical analysis of the gasified black liquor shows there is a large percentage of combustible gases in the products of the gasification process (approximately 70%). The potential exists, therefore, for using this fuel mixture to fire the pulse combustor. This makes the entire process more efficient and may be necessary to make it economically feasible. The overall goals of this study are to determine (1) which is the limiting heat transfer rate in the process of transferring the heat from the hot combustion products to the pipe, through the pipe, from the tailpipe to the bed and then throughout the bed; i.e., whether increased heat transfer within the pulse combustor will significantly increase the overall heat transfer rate; (2) whether the temperature distribution in the bed can be maintained within the narrow temperature range required by the process without generating hot spots in the bed even if the heat transfer from the pulse combustor is significantly increased; and (3) whether the fuel gas produced during the gasification process can be used to efficiently fire the pulse combustor.

Kushari, A.; Jeong, H.; Jagoda, J.I.; Zinn, B.T.

1995-12-31T23:59:59.000Z

202

Improved Materials for Use as Components in Kraft Black Liquor Recovery Boilers  

SciTech Connect (OSTI)

This Cooperative Research and Development Agreement (CRADA) was undertaken to evaluate current and improved materials and materials processing conditions for use as components in kraft black liquor recovery boilers and other unit processes. The main areas addressed were: (1) Improved Black Liquor Nozzles, (2) Weld Overlay of Composite Floor Tubes, and (3) Materials for Lime Kilns. Iron aluminide was evaluated as an alternate material for the nozzles used to inject an aqueous solution known as black liquor into recovery boilers as well for the uncooled lining in the ports used for the nozzles. Although iron aluminide is known to have much better sulfidation resistance in gases than low alloy and stainless steels, it did not perform adequately in the environment where it came into contact with molten carbonate, sulfide and sulfate salts. Weld overlaying carbon steel tubes with a layer of stainless weld metal was a proposed method of extending the life of recovery boiler floor tubes that have experienced considerable fireside corrosion. After exposure under service conditions, sections of weld overlaid floor tubes were removed from a boiler floor and examined metallographically. Examination results indicated satisfactory performance of the tubes. Refractory-lined lime kilns are a critical component of the recovery process in kraft pulp mills, and the integrity of the lining is essential to the successful operation of the kiln. A modeling study was performed to determine the cause of, and possible solutions for, the repeated loss of the refractory lining from the cooled end of a particular kiln. The evaluation showed that the temperature, the brick shape and the coefficient of friction between the bricks were the most important parameters influencing the behavior of the refractory lining.

Keiser, J.R.

2000-04-18T23:59:59.000Z

203

Robert Wood, University of Washington many contributors  

E-Print Network [OSTI]

Robert Wood, University of Washington many contributors VOCALS Education and Outreach Snider (Wyoming) · Dave Spencer (NCSU) · Cindy Twohy (OSU) · Rob Wood/Chris Bretherton/Rhea George

Wood, Robert

204

Marin County- Wood Stove Replacement Rebate Program  

Broader source: Energy.gov [DOE]

The County of Marin has created a rebate program to encourage homeowners to remove or replace non-EPA certified wood-burning heaters (wood stoves and fireplace inserts) with cleaner burning stoves...

205

Decreasing the leachibility of boron wood preservatives  

E-Print Network [OSTI]

The use of boron in wood preservatives has been growing since the 1930s, primarily in various boric acid/borax mixtures. Boron preservatives have several advantages for application as wood preservatives including a broad spectrum of activity...

Gezer, Engin Derya

1996-01-01T23:59:59.000Z

206

1Wood Borer --WB-XX-W America's Least Wanted Wood-Borers  

E-Print Network [OSTI]

1Wood Borer -- WB-XX-W WB-01-W America's Least Wanted Wood-Borers Department of Entomology OAK. Ferris, Entomologists This metallic wood-boring beetle (Family Bupresti- dae) primarily attacks oaks. Oak wood- borers. Distribution: The native geographical range of this beetle includes parts of Asia, Africa

Ginzel, Matthew

207

STACY L. WOOD Department of Marketing wood@moore.sc.edu  

E-Print Network [OSTI]

STACY L. WOOD Department of Marketing wood@moore.sc.edu Moore School of Business ph. (803) 777) Alba, Joseph, John Lynch, Barton Weitz, Chris Janiszewski, Richard Lutz, Alan Sawyer, Stacy Wood (1997, September-October 1996, p. 12. Wood, Stacy L. (2001), "Remote Purchase Environments: The Influence of Return

Reif, John H.

208

1Wood Borer --WB-XX-W America's Least Wanted Wood-Borers  

E-Print Network [OSTI]

1Wood Borer -- WB-XX-W WB-07-W America's Least Wanted Wood-Borers Department of Entomology JAPANESE. Pupation takes place in the wood and adults emerge by chewing a round exit hole. Adults feed on the tender) #12;2Wood Borer -- WB-07-W October 2012 It is the policy of the Purdue University Cooperative

Ginzel, Matthew

209

Wood density measurement protocol J Chave Page 1 Measuring wood density for tropical forest trees  

E-Print Network [OSTI]

Wood density measurement protocol ­ J Chave Page 1 Measuring wood density for tropical forest trees Diversité Biologique Université Paul Sabatier 31000 Toulouse, France 1. Introduction Wood is a biological, that transport the sap along the stem and they are filled by water. The density of tree wood is an interesting

Chave, Jérôme

210

1Wood Borer --WB-XX-W America's Least Wanted Wood-Borers  

E-Print Network [OSTI]

1Wood Borer -- WB-XX-W WB-06-W America's Least Wanted Wood-Borers Department of Entomology CAMPHOR August. Female beetles make a horizontal tunnel in the wood initiating gallery construction where/APHIS grant number 10-8100-1488-CA. #12;2Wood Borer -- WB-06-W October 2012 It is the policy of the Purdue

Ginzel, Matthew

211

1Wood Borer --WB-XX-W America's Least Wanted Wood-Borers  

E-Print Network [OSTI]

1Wood Borer -- WB-XX-W WB-08-W America's Least Wanted Wood-Borers Department of Entomology OAK, these beetles feed on oak (Quercus spp). Direct damage results from galleries in the wood that are formed in the breeding season. The host trees for these beetles are important for the wood indus- try, orna

Ginzel, Matthew

212

1Wood Borer --WB-XX-W America's Least Wanted Wood-Borers  

E-Print Network [OSTI]

1Wood Borer -- WB-XX-W WB-09-W America's Least Wanted Wood-Borers Department of Entomology EUROPEAN trees are very crucial for the wood industry, ornamental industry and many species of wildlife: The beetles construct the egg gal- leries perpendicular to the grain of the wood which can be found under

Ginzel, Matthew

213

Eucalyptus kraft black liquor enhances growth and productivity of Spirulina in outdoor cultures  

SciTech Connect (OSTI)

Mass cultivation of microalgae for commercial applications suffers from poor productivities when measured against laboratory results or theoretical projections. In an effort to reduce this gap it was discovered that addition of eucalyptus kraft black liquor (BL) enhanced biomass productivity in outdoor cultures of Spirulina by increasing growth rate by 38% and biomass yield by 43%. BL treatment resulted in elevation of nitrogen assimilating enzyme activities and efficiency of phosphate utilization. Analyses of forenoon and afternoon oxygen production rates (OPRs) indicated higher photosynthetic and respiratory activity in BL-treated cultures compared to untreated cultures. 20 refs., 1 fig., 2 tabs.

Chauhan, V.S.; Singh, G.; Ramamurthy, V. [Thapar Institute of Engineering and Technology, Patiala (India)

1995-07-01T23:59:59.000Z

214

Electronic nose with a new feature reduction method and a multi-linear classifier for Chinese liquor classification  

SciTech Connect (OSTI)

An electronic nose (e-nose) was designed to classify Chinese liquors of the same aroma style. A new method of feature reduction which combined feature selection with feature extraction was proposed. Feature selection method used 8 feature-selection algorithms based on information theory and reduced the dimension of the feature space to 41. Kernel entropy component analysis was introduced into the e-nose system as a feature extraction method and the dimension of feature space was reduced to 12. Classification of Chinese liquors was performed by using back propagation artificial neural network (BP-ANN), linear discrimination analysis (LDA), and a multi-linear classifier. The classification rate of the multi-linear classifier was 97.22%, which was higher than LDA and BP-ANN. Finally the classification of Chinese liquors according to their raw materials and geographical origins was performed using the proposed multi-linear classifier and classification rate was 98.75% and 100%, respectively.

Jing, Yaqi; Meng, Qinghao, E-mail: qh-meng@tju.edu.cn; Qi, Peifeng; Zeng, Ming; Li, Wei; Ma, Shugen [Tianjin Key Laboratory of Process Measurement and Control, Institute of Robotics and Autonomous Systems, School of Electrical Engineering and Automation, Tianjin University, Tianjin 300072 (China)] [Tianjin Key Laboratory of Process Measurement and Control, Institute of Robotics and Autonomous Systems, School of Electrical Engineering and Automation, Tianjin University, Tianjin 300072 (China)

2014-05-15T23:59:59.000Z

215

School of Biological Sciences Juvenile wood  

E-Print Network [OSTI]

School of Biological Sciences Juvenile wood What is it and why should we be concerned? #12;School of Biological Sciences What is juvenile wood? A brief recap. There is no universally accepted definition of juvenile wood. It is typically described as follows · zone near to the pith · displays marked

216

c Copyright 2014 Benjamin P. Wood  

E-Print Network [OSTI]

c Copyright 2014 Benjamin P. Wood #12;#12;Software and Hardware Support for Data-Race Exceptions Benjamin P. Wood A dissertation submitted in partial fulfillment of the requirements for the degree;#12;University of Washington Abstract Software and Hardware Support for Data-Race Exceptions Benjamin P. Wood Co

Anderson, Richard

217

Generating Textures of New Zealand Native Wood  

E-Print Network [OSTI]

1 Generating Textures of New Zealand Native Wood Jack Wang Abstract - This report explores algorithms for computer generated textures simulating New Zealand native wood, we out line procedural and Ray tracing. The main goal of this research is to study New Zealand native wood in depth and to gather

Goodman, James R.

218

Updated 1-12 Bryan H. Wood  

E-Print Network [OSTI]

Updated 1-12 Bryan H. Wood UNITED STATES MARINE CORPS DIRECTOR, PACIFIC DIVISION PLANS, POLICIES, OPERATIONS DEPARTMENT U.S. Marine Corps Mr. Bryan H. Wood is the Director, Pacific Division under the Deputy-Japan International Agreement. Mr. Wood was appointed to his current position in 2010 following 24 years

219

SOLID WOOD PRODUCTS EFFECTS OF ELEVATED AND  

E-Print Network [OSTI]

SOLID WOOD PRODUCTS EFFECTS OF ELEVATED AND HIGH-TEMPERATURE SCHEDULES ON NARP IN SOUTHERN YELLOW-temperature (ET) from ET and HT schedules. and a high-temperature (HT) schedule. Wood properties including juvenile wood content, density, ring count, largest knot area, presence of pith, moisture content

220

Wood Laminated Composite Louisiana Forest Product Lab  

E-Print Network [OSTI]

Wood Laminated Composite Poles Cheng Piao Louisiana Forest Product Lab School of Renewable Natural, in accordance with CSA O15, ANSI 05 and many other international standards #12;Wood Laminated Composite Poles y, v z, w R r x, u #12;Why Wood Composite Poles · Sufficient strength · More cost-effective · Light

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Optical computing Damien Woods a  

E-Print Network [OSTI]

Optical computing Damien Woods a aDepartment of Computer Science and Artificial Intelligence Institute, Vierimaantie 5, 84100 Ylivieska, Finland Abstract We consider optical computers that encode data using images and compute by transforming such images. We give an overview of a number of such optical

Woods, Damien

222

Optical computing Damien Woods a  

E-Print Network [OSTI]

Optical computing Damien Woods a aDepartment of Computer Science and Artificial Intelligence Institute, Vierimaantie 5, 84100 Ylivieska, Finland Abstract In this survey we consider optical computers of such optical computing archi- tectures, including descriptions of the type of hardware commonly used in optical

Woods, Damien

223

Creating Value Wood Products Industry  

E-Print Network [OSTI]

Louisiana Forest Products Development Center #12;2 Louisiana is blessed with quality timberland for the Wood Products Industry The forest industry contributes more than 50 percent of the total value of all for quality information, research and education in forest products in Louisiana, recognized regionally

224

Cultural Values of Trees, Woods  

E-Print Network [OSTI]

research into the importance of the cultural values of trees, woods and forests for sustainable forest managers have to take account of cultural values as one of the central themes of Sustainable Forest and taking them into account as part of the processes of planning and decisionmaking. Cultural values

225

Wood-Composites Industry Benefits from ALS Research  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun DengWISPWindDownloadsWood and Pellet

226

Wood-Composites Industry Benefits from ALS Research  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun DengWISPWindDownloadsWood and

227

Black liquor combustion validated recovery boiler modeling: Final year report. Volume 4 (Appendix IV)  

SciTech Connect (OSTI)

This project was initiated in October 1990, with the objective of developing and validating a new computer model of a recovery boiler furnace using a computational fluid dynamics (CFD) code specifically tailored to the requirements for solving recovery boiler flows, and using improved submodels for black liquor combustion based on continued laboratory fundamental studies. The key tasks to be accomplished were as follows: (1) Complete the development of enhanced furnace models that have the capability to accurately predict carryover, emissions behavior, dust concentrations, gas temperatures, and wall heat fluxes. (2) Validate the enhanced furnace models, so that users can have confidence in the predicted results. (3) Obtain fundamental information on aerosol formation, deposition, and hardening so as to develop the knowledge base needed to relate furnace model outputs to plugging and fouling in the convective sections of the boiler. (4) Facilitate the transfer of codes, black liquid submodels, and fundamental knowledge to the US kraft pulp industry. Volume 4 contains the following appendix sections: Radiative heat transfer properties for black liquor combustion -- Facilities and techniques and Spectral absorbance and emittance data; and Radiate heat transfer determination of the optical constants of ash samples from kraft recovery boilers -- Calculation procedure; Computation program; Density determination; Particle diameter determination; Optical constant data; and Uncertainty analysis.

Grace, T.M.; Frederick, W.J.; Salcudean, M.; Wessel, R.A.

1998-08-01T23:59:59.000Z

228

Material Characterization and Analysis for Selection of Refractories Used In Black Liquor Gasification  

SciTech Connect (OSTI)

Black liquor gasification provides the pulp and paper industry with a technology which could potentially replace recovery boilers with equipment that could reduce emissions and, if used in a combined cycle system, increase the power production of the mill allowing it to be a net exporter of electrical power. In addition, rather than burning the syngas produced in a gasifier, this syngas could be used to produce higher value chemicals or fuels. However, problems with structural materials, and particularly the refractory lining of the reactor vessel, have caused unplanned shutdowns and resulted in component replacement much sooner than originally planned. Through examination of exposed materials, laboratory corrosion tests and cooperative efforts with refractory manufacturers, many refractory materials issues in high-temperature black liquor gasification have been addressed and optimized materials have been selected for this application. In this paper, the characterization and analysis techniques used for refractory screening and selection will be discussed along with characteristic results from these methods which have led to the selection of optimized materials for this application.

Hemrick, James Gordon [ORNL; Keiser, James R [ORNL; Meisner, Roberta Ann [ORNL; Gorog, John Peter [ORNL

2008-01-01T23:59:59.000Z

229

Material Characterization and Analysis for Selection of Refractories Used in Black Liquor Gasification  

SciTech Connect (OSTI)

Black liquor gasification provides the pulp and paper industry with a technology which could potentially replace recovery boilers with equipment that could reduce emissions and, if used in a combined cycle system, increase the power production of the mill allowing it to be a net exporter of electrical power. In addition, rather than burning the syngas produced in a gasifier, this syngas could be used to produce higher value chemicals or fuels. However, problems with structural materials such as the refractory lining of the reactor vessel have caused unplanned shutdowns and resulted in component replacement much sooner than originally planned. Through examination of exposed materials, laboratory corrosion tests and cooperative efforts with refractory manufacturers, many refractory materials issues in high-temperature black liquor gasification have been addressed and optimized materials have been selected for this application. In this paper, an updated summary of the characterization and analysis techniques used for refractory screening and selection will be discussed along with characteristic results from these methods which have led to the selection of optimized materials for both the hot-face and back-up linings used in this application.

Hemrick, James Gordon [ORNL; Keiser, James R [ORNL; Meisner, Roberta A [University of Tennessee, Knoxville (UTK) & Oak Ridge National Laboratory (ORNL)

2010-01-01T23:59:59.000Z

230

Separation and characterization of lignins from the black liquor of oil palm trunk fiber pulping  

SciTech Connect (OSTI)

Six lignin preparations, isolated by a novel two-step precipitation method instead of the traditional one-step precipitation method from the oil palm trunk fiber pulping (OPTFP) black liquor, were found to be relatively free of nonlignin materials such as polysaccharide degradation products, ash, and salts. A lignin fraction with a purity of 99.5% was obtained at an optimum precipitation pH 1.5 after isolation of the nonlignin materials in ethanol. About 94% of the total lignin was recovered by this novel method at this condition, and the value of COD in the treated black liquor reduced significantly to lower 250. The isolated lignin fractions contained syringyl, guaiacyl, and p-hydroxyphenyl units in an approximate molar ratio of 16--20:5:1 on the basis of chemical and spectroscopic analysis. Small amounts of p-hydroxybenzoic acids were found to be esterified to lignin, while ferulic acids were associated to lignin by ether linkage. {sup 13}C-NMR indicated the presence of {beta}-O-4 ether bonds, and {beta}-5 and 5-5{prime} carbon-carbon linkages between the lignin molecules.

Sun, R.; Tomkinson, J.; Bolton, J.

1999-11-01T23:59:59.000Z

231

MOLTEN SALT CORROSION OF SUPERHEATERS IN BLACK LIQUOR RECOVERY BOILERS John Bohling, University of Tennessee Georgia Tech SURF 2010 Fellow  

E-Print Network [OSTI]

MOLTEN SALT CORROSION OF SUPERHEATERS IN BLACK LIQUOR RECOVERY BOILERS John Bohling, University If the temperature is above the first melting point of the scale, severe corrosion of the tubes can result temperatures, reducing efficiency. The corrosive nature of the superheater environment arises primarily from

Li, Mo

232

Stability and Regeneration of Catalysts for the Destruction of Tars from Bio-mass Black Liquor Gasification  

SciTech Connect (OSTI)

The goal of this project was to develop catalytic materials and processes that would be effective in the destruction of tars formed during the gasification of black liquor and biomass. We report here the significant results obtained at the conclusion of this two year project.

Pradeep Agrawal

2004-09-07T23:59:59.000Z

233

PERFORMANCE OF BLACK LIQUOR GASIFIER/GAS TURBINE COMBINED CYCLE COGENERATION IN mE KRAFT PULP  

E-Print Network [OSTI]

PERFORMANCE OF BLACK LIQUOR GASIFIER/GAS TURBINE COMBINED CYCLE COGENERATION IN mE KRAFT PULP high-temperature gasifiers for gas turbine applications. ABB and MTCr/Stonechem are developing low-load performance of gasifier/gas turbine systemsincorporating the four above-noted gasifier designs are reported

234

Measuring bulky waste arisings in Hong Kong  

SciTech Connect (OSTI)

All too often, waste authorities either assume that they know enough about their bulky waste stream or that it is too insignificant to deserve attention. In this paper, we use Hong Kong as an example to illustrate that official bulky waste figures can actually be very different from the reality and therefore important waste management decisions made based on such statistics may be wrong too. This study is also the first attempt in Hong Kong to outline the composition of bulky waste. It was found that about 342 tonnes/day of wood waste were omitted by official statistics owing to incomplete records on actual bulky waste flow. This is more than enough to provide all the feedstock needed for one regular-sized wood waste recycling facility in Hong Kong. In addition, the proportion of bulky waste in the municipal solid waste (MSW) streams in Hong Kong should be about 6.1% instead of the officially stated 1.43%. Admittedly, there are limitations with this study. Yet, present findings are suggestive of significant MSW data distortion in Hong Kong.

Chung Shanshan, E-mail: sschung@hkbu.edu.h [Croucher Institute for Environmental Sciences, Department of Biology, Hong Kong Baptist University, Kowloon Tong (Hong Kong); Lau, Ka-yan Winifred; Zhang Chan [Croucher Institute for Environmental Sciences, Department of Biology, Hong Kong Baptist University, Kowloon Tong (Hong Kong)

2010-05-15T23:59:59.000Z

235

Commercial Demonstration of Wood Recovery, Recycling, and Value Adding Technologies  

SciTech Connect (OSTI)

This commercial demonstration project demonstrated the technical feasibility of converting low-value, underutilized and waste stream solid wood fiber material into higher valued products. With a growing need to increase product/production yield and reduce waste in most sawmills, few recovery operations and practically no data existed to support the viability of recovery operations. Prior to our efforts, most all in the forest products industry believed that recovery was difficult, extremely labor intensive, not cost effective, and that recovered products had low value and were difficult to sell. This project provided an opportunity for many within the industry to see through demonstration that converting waste stream material into higher valued products does in fact offer a solution. Our work, supported by the U.S. Department of Energy, throughout the project aimed to demonstrate a reasonable approach to reducing the millions of recoverable solid wood fiber tons that are annually treated as and converted into low value chips, mulch and fuel. Consequently sawmills continue to suffer from reduced availability of forest resources, higher raw material costs, growing waste disposal problems, increased global competition, and more pressure to operate in an Environmentally Friendly manner. It is our belief (based upon the experience of this project) that the successful mainstreaming of the recovery concept would assist in alleviating this burden as well as provide for a realistically achievable economic benefit to those who would seriously pursue the concept and tap into the rapidly growing ''GREEN'' building marketplace. Ultimately, with participation and aggressive pursuit of the recovery concept, the public would benefit in that: (1) Landfill/disposal waste volume could be reduced adding greater life to existing municipal landfill sites thereby minimizing the need to prematurely license and open added facilities. Also, there would be a cost avoidance benefit associated to what would have been the added municipal (community) management costs involved with maintaining closed landfills. (2) With greater quantities of recovered material being returned to and integrated into manufacturing and the marketplace, reduced demand upon virgin wood sources could help lead the way to promoting improved relations and environmental balance between producers and consumers further expanding the value of our natural resource without adding environmental burden.

Auburn Machinery, Inc.

2004-07-15T23:59:59.000Z

236

URBAN WOOD/COAL CO-FIRING IN THE BELLEFIELD BOILERPLANT  

SciTech Connect (OSTI)

An Environmental Questionnaire for the demonstration at the Bellefield Boiler Plant (BBP) was submitted to the national Energy Technology Laboratory. An R&D variance for the air permit at the BBP was sought from the Allegheny County Health Department (ACHD). R&D variances for the solid waste permits at the J. A. Rutter Company (JARC), and Emery Tree Service (ETS) were sought from the Pennsylvania Department of Environmental Protection (PADEP). Construction wood was acquired from Thompson Properties and Seven D Corporation. Verbal authorizations were received in all cases. Memoranda of understanding were executed by the University of Pittsburgh with BBP, JARC and ETS. Construction wood was collected from Thompson Properties and from Seven D Corporation. Forty tons of pallet and construction wood were ground to produce BioGrind Wood Chips at JARC and delivered to Mon Valley Transportation Company (MVTC). Five tons of construction wood were hammer milled at ETS and half of the product delivered to MVTC. Blends of wood and coal, produced at MVTC by staff of JARC and MVTC, were shipped by rail to BBP. The experimental portion of the project was carried out at BBP in late March and early April 2001. Several preliminary tests were successfully conducted using blends of 20% and 33% wood by volume. Four one-day tests using a blend of 40% wood by volume were then carried out. Problems of feeding and slagging were experienced with the 40% blend. Light-colored fly ash was observed coming from the stack during all four tests. Emissions of SO{sub 2}, NOx and total particulates, measured by Energy Systems Associates, decreased when compared with combusting coal alone. A procedure for calculating material and energy balances on BBP's Boiler No.1 was developed, using the results of an earlier compliance test at the plant. Material and energy balances were then calculated for the four test periods. Boiler efficiency was found to decrease slightly when the fuel was shifted from coal to the 40% blend. Neither commercial production of sized urban waste wood for the energy market in Pittsburgh nor commercial cofiring of wood/coal blends at BBP are anticipated in the near future.

James T. Cobb Jr.; Gene E. Geiger; William W. Elder III; William P. Barry; Jun Wang; Hongming Li

2004-04-08T23:59:59.000Z

237

Test procedures and instructions for Hanford tank waste supernatant cesium removal  

SciTech Connect (OSTI)

This document provides specific test procedures and instructions to implement the test plan for the preparation and conduct of a cesium removal test using Hanford Double-Shell Slurry Feed supernatant liquor from tank 251-AW-101 in a bench-scale column.Cesium sorbents to be tested include resorcinol-formaldehyde resin and crystalline silicotitanate. The test plan for which this provides instructions is WHC-SD-RE-TP-022, Hanford Tank Waste Supernatant Cesium Removal Test Plan.

Hendrickson, D.W., Westinghouse Hanford

1996-05-31T23:59:59.000Z

238

Refractory Testing and Evaluation at Oak Ridge National Laboratory for Black Liquor Gasifier Applications.  

SciTech Connect (OSTI)

Work is on-going at Oak Ridge National Laboratory to evaluate refractory containment and smelt contact materials for black liquor gasification applications. Materials have been evaluated and selected for low temperature gasification processes, with a number of materials being installed in commercial units currently under construction. For high temperature low pressure gasification processes, efforts have focused on screening candidate lining materials through immersion testing, improving existing refractory performance through the application of surface treatments, and the installation and evaluation of samples in an operating gasifier in New Bern, NC. Efforts concerning high temperature high pressure gasification have involved the identification and testing of suitable refractory materials for the coating of a helical carbon steel cooling coil arrangment.

Hemrick, James Gordon [ORNL; Keiser, James R [ORNL; Meisner, Roberta Ann [ORNL; Hubbard, Camden R [ORNL; Lara-Curzio, Edgar [ORNL

2006-01-01T23:59:59.000Z

239

Separation of kraft lignin from kraft black liquor: Final report, July 1984-April 1987  

SciTech Connect (OSTI)

The importance of this work is related to the fact that with over 16 million tons of kraft lignin available annually, practically all of it is burned just for its heat value. In essence, kraft lignin has no real value except its heat value. The major accomplishments of this research has shown that it is possible to produce high purity kraft lignin from kraft black liquor. This patented technology represents a way of producing a material that can be utilized in a wide variety of markets. Kraft lignin that was produced using this technology was sent to major corporations who used this kraft lignin as a starting material in their chemical processes. 3 figs.

Kurple, K.R.

1988-04-15T23:59:59.000Z

240

Cracking and Corrosion of Composite Tubes in Black Liquor Recovery Boiler Primary Air Ports  

SciTech Connect (OSTI)

Black liquor recovery boilers are an essential part of kraft mills. Their design and operating procedures have changed over time with the goal of providing improved boiler performance. These performance improvements are frequently associated with an increase in heat flux and/or operating temperature with a subsequent increase in the demand on structural materials associated with operation at higher temperatures and/or in more corrosive environments. Improvements in structural materials have therefore been required. In most cases the alternate materials have provided acceptable solutions. However, in some cases the alternate materials have solved the original problem but introduced new issues. This report addresses the performance of materials in the tubes forming primary air port openings and, particularly, the problems associated with use of stainless steel clad carbon steel tubes and the solutions that have been identified.

Keiser, James R.; Singbeil, Douglas L.; Sarma, Gorti B.; Kish, Joseph R.; Yuan, Jerry; Frederick, Laurie A.; Choudhury, Kimberly A.; Gorog, J. Peter; Jett, Francois R.; Hubbard, Camden R.; Swindeman, Robert W.; Singh, Prett M.; Maziasz, Phillip J.

2006-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

California Wood Energy Program1 Gary Brittner2  

E-Print Network [OSTI]

California Wood Energy Program1 Gary Brittner2 The California Department of Forestry Wood Energy projects to increase utilization of wood for energy. The Wood Energy Program came about partly the management of the wood resource. The Department of Forestry recognized that an extensive resource

Standiford, Richard B.

242

Black Liquor Combustion Validated Recovery Boiler Modeling, Final Year Report, Volume 5: Appendix V  

SciTech Connect (OSTI)

This project was initiated in October 1990 with the objective of developing and validating a new computer model of a recovery boiler furnace using a computational fluid dynamics (CFD) code specifically tailored to the requirements for solving recovery boiler flows, and using improved submodels for black liquor combustion based on continued laboratory fundamental studies. Many of these objectives were accomplished at the end of the first five years and documented in a comprehensive report on that work (DOE/CE/40936-T3, 1996). A critical review of recovery boiler modeling, carried out in 1995, concluded that further enhancements of the model were needed to make reliable predictions of key output variables. In addition, there was a need for sufficient understanding of fouling and plugging processes to allow model outputs to be interpreted in terms of the effect on plugging and fouling. As a result, the project was restructured and reinitiated at the end of October 1995, and was completed in June 1997. The entire project is now complete and this report summarizes all of the work done on the project since it was restructured. The key tasks to be accomplished under the restructured project were to (1) Complete the development of enhanced furnace models that have the capability to accurately predict carryover, emissions behavior, dust concentrations, gas temperatures, and wall heat fluxes; (2) Validate the enhanced furnace models, so that users can have confidence in the results; (3) Obtain fundamental information on aerosol formation, deposition, and hardening so as to develop the knowledge base needed to relate furnace model outputs to plugging and fouling in the convective sections of the boiler; and (4) Facilitate the transfer of codes, black liquor submodels, and fundamental knowledge to the U.S. kraft pulp industry.

Grace, T.M.; Frederick, W.J.; Salcudean, M.; Wessel, R.A.

1998-08-01T23:59:59.000Z

243

Black Liquor Combustion Validated Recovery Boiler Modeling, Final Year Report, Volume 4: Appendix IV  

SciTech Connect (OSTI)

This project was initiated in October 1990 with the objective of developing and validating a new computer model of a recovery boiler furnace using a computational fluid dynamics (CFD) code specifically tailored to the requirements for solving recovery boiler flows, and using improved submodels for black liquor combustion based on continued laboratory fundamental studies. Many of these objectives were accomplished at the end of the first five years and documented in a comprehensive report on that work (DOE/CE/40936-T3, 1996). A critical review of recovery boiler modeling, carried out in 1995, concluded that further enhancements of the model were needed to make reliable predictions of key output variables. In addition, there was a need for sufficient understanding of fouling and plugging processes to allow model outputs to be interpreted in terms of the effect on plugging and fouling. As a result, the project was restructured and reinitiated at the end of October 1995, and was completed in June 1997. The entire project is now complete and this report summarizes all of the work done on the project since it was restructured. The key tasks to be accomplished under the restructured project were to (1) Complete the development of enhanced furnace models that have the capability to accurately predict carryover, emissions behavior, dust concentrations, gas temperatures, and wall heat fluxes; (2) Validate the enhanced furnace models, so that users can have confidence in the results; (3) Obtain fundamental information on aerosol formation, deposition, and hardening so as to develop the knowledge base needed to relate furnace model outputs to plugging and fouling in the convective sections of the boiler; and (4) Facilitate the transfer of codes, black liquor submodels, and fundamental knowledge to the U.S. kraft pulp industry.

Grace, T.M.; Frederick, W.J.; Salcudean, M.; Wessel, R.A.

1998-08-01T23:59:59.000Z

244

One on One- Douglas K Woods  

Broader source: Energy.gov [DOE]

A September 2014 interview with Douglas K Woods, the President of the Association for Manufacturing Technology, on the state of US manufacturing.

245

1Wood Borer --WB-XX-W America's Least Wanted Wood-Borers  

E-Print Network [OSTI]

1Wood Borer -- WB-XX-W WB-05-W America's Least Wanted Wood-Borers Department of Entomology ASIAN) #12;1-888-EXT-INFO · www.extension.purdue.edu 2Wood Borer -- WB-05-W October 2012 It is the policy

Ginzel, Matthew

246

WoodPolymer Composites Prepared by the In Situ Polymerization of Monomers Within Wood  

E-Print Network [OSTI]

Wood­Polymer Composites Prepared by the In Situ Polymerization of Monomers Within Wood Yong-Feng Li in Wiley Online Library (wileyonlinelibrary.com). ABSTRACT: Wood­polymer composites (WPCs) were prepared words: composites; mechanical properties; modifi- cation; monomers; renewable resources INTRODUCTION

247

Department of Forest and Wood Science Academic Programmes for 2014  

E-Print Network [OSTI]

Department of Forest and Wood Science Academic Programmes for 2014 Postgraduate Diploma Enquiries: Head of Department Contact details: Department of Forest and Wood Science Stellenbosch University;Department of Forest and Wood Science - 2012 2 Contents: Postgraduate Programmes Postgraduate Diploma

Geldenhuys, Jaco

248

Daniel Wood | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergy DOE Theory9-9260-2003October 02,(JulyWebinar: IRSofDanDaniel Wood

249

PPPO-02-427-07 Revised Solid Waste Management Unit Assessment...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Area for Concrete Piers, Rubble, and Wood on the North Side of C-745-B Cylinder Yard Solid Waste Management Unit Assessment Report UNIT NUMBER: 548 DATE OF ORIGINAL SAR: 627...

250

automatic wood furnaces: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

pressure differences that included standard rating points 11 Wood Products 201213 Student Handbook Environmental Sciences and Ecology Websites Summary: Wood Products 201213 Student...

251

Autonomy for Aurora's Mars Missions Mark Woods,  

E-Print Network [OSTI]

Autonomy for Aurora's Mars Missions Mark Woods, SciSys Ltd., Clothier Road, Bristol, UK BS4 5SS Email: mark.woods@scisys.co.uk Tel: +44 117 9717251 ESA's Aurora programme incorporates a strategy for European involvement in future robotic and human exploration of our Solar System. The Aurora roadmap calls

Fisher, Michael

252

FAO Forestry Department Wood Energy WISDOM Slovenia  

E-Print Network [OSTI]

as their relevance in forestry, energy and rural development contexts, woody biomass is an important resource thatFAO ­ Forestry Department ­ Wood Energy WISDOM ­ Slovenia Spatial woodfuel production Rudi Drigo Forestry Specialist - Wood energy planning and forest resources monitoring Zivan Veseli

253

Genotoxicity profiles during KPEG dehalogenation of wood preserving waste  

E-Print Network [OSTI]

ivas fouii?l to be effective for treatment of soils containinated ivith PCBs (Aroclor 1242, 1248, 1200); polychlorinated triphenyls; 2, 4-di-. 2, 4, 1-tri- and 2. 3. 7. 8-tetrachlorodibenzo-p- dioxins; and siniilar compounds. Dev ?I al. (1?J89... array emplaced in bore holes drilled through the soil for energy deposition. Although no combined studes of in s?t?& RF heating-enhanced KPEG decontaiuination v&ere performed, the preliminary couclusion inade ivas that the treatment may...

Hong, Marjorie S

1994-01-01T23:59:59.000Z

254

Gasification of kraft black liquor and use of the products in combined cycle cogeneration. Final report, Phase II  

SciTech Connect (OSTI)

This Phase II study of kraft black liquor gasification and use of the product gases in combined cycle cogeneration based on combustion gas turbines was motivated by the very promising results of the Phase I feasibility study. The Phase I study indicated that the alternative technology to the Tomlinson recovery furnace had the potential of improving the energy efficiency and safety of combusting black liquor, reducing the capital and operating costs, increasing the electric power output, and providing an economical system for incremental kraft capacity additions. During Phase II, additional bench-scale experiments were run, pilot-scale experiments were conducted, equipment systems were investigated, and performance and economics were reanalyzed. All of the objectives of the Phase II project were met. Recommendations are summarized.

Kelleher, E.G.

1985-07-01T23:59:59.000Z

255

Simultaneous measurement of the surface temperature and the release of atomic sodium from a burning black liquor droplet  

SciTech Connect (OSTI)

Simultaneous measurement of the concentration of released atomic sodium, swelling, surface and internal temperature of a burning black liquor droplet under a fuel lean and rich condition has been demonstrated. Two-dimensional two-colour optical pyrometry was employed to determine the distribution of surface temperature and swelling of a burning black liquor droplet while planar laser-induced fluorescence (PLIF) was used to assess the temporal release of atomic sodium. The key findings of these studies are: (i) the concentration of atomic sodium released during the drying and devolatilisation stages was found to be correlated with the external surface area; and (ii) the insignificant presence of atomic sodium during the char consumption stage shows that sodium release is suppressed by the lower temperature and by the high CO{sub 2} content in and around the particle. (author)

Saw, Woei L.; Nathan, Graham J. [Centre for Energy Technology, The University of Adelaide, SA 5006 (Australia); School of Mechanical Engineering, The University of Adelaide (Australia); Ashman, Peter J.; Alwahabi, Zeyad T. [Centre for Energy Technology, The University of Adelaide, SA 5006 (Australia); School of Chemical Engineering, The University of Adelaide (Australia); Hupa, Mikko [Process Chemistry Centre, Aabo Akademi, Biskopsgatan 8 FI-20500 Aabo (Finland)

2010-04-15T23:59:59.000Z

256

Cofiring waste biofuels and coal for emissions reduction  

SciTech Connect (OSTI)

Combustion tests have been performed in two pilot-scale combustion facilities to evaluate the emissions reduction possible while firing coal blended with several different biofuels. Two different boiler simulations, pulverized coal fired boilers and stoker coal fired boilers, were simulated. The pc-fired studies investigated the use of waste hardwood and softwood with pulverized coal, or using the biofuels as potential reburning fuels. The use of these wood waste is attractive because: wood contains little nitrogen and virtually no sulfur; wood is a regenerable biofuel; and wood utilization results in a net reduction in CO{sub 2} emissions. The wood reburning results indicate a reduction of 50-60% NO with approximately 10% wood heat input. Reburn stoichiometry was the most important variable. The NO reduction was strongly dependent upon initial NO and only slightly dependent upon temperature and wood moisture content. Cofiring of wood with pulverized coal; however, did not lead to significant NO reductions with the current NO{sub x} burner configuration. The stoker program investigated barriers for the successful blending of coal with waste railroad ties. Parameters evaluated included blending firing rate, chip size, optimum feed location, overfire/underfire air ratio, and natural gas addition. The results of this study demonstrate that NO emissions can be reduced by more than 50% without any significant increase in CO or THC emissions by the proper use of zoned reburning. Both programs demonstrated several benefits of biofuel cofiring, including: (1) lower operating costs due to reduced fuel prices; (2) reduced waste disposal; (3) reduced maintenance costs; (4) reduced environmental costs; and (5) extension of the useful life of existing equipment.

Brouwer, J.; Owens, W.D.; Harding, N.S. [Reaction Engineering International, Salt Lake City, UT (United States)] [and others

1995-11-01T23:59:59.000Z

257

Direct Causticizing for Black Liquor Gasification in a Circulating Fluidized Bed  

SciTech Connect (OSTI)

Gasification of black liquor (BLG) has distinct advantages over direct combustion in Tomlinson recovery boilers. In this project we seek to resolve causticizing issues in order to make pressurized BLG even more efficient and cost-effective. One advantage of BLG is that the inherent partial separation of sulfur and sodium during gasification lends itself to the use of proven high yield variants to conventional kraft pulping which require just such a separation. Processes such as polysulfide, split sulfidity, ASAQ, and MSSAQ can increase pulp yield from 1% to 10% over conventional kraft but require varying degrees of sulfur/sodium separation, which requires additional [and costly] processing in a conventional Tomlinson recovery process. However during gasification, the sulfur is partitioned between the gas and smelt phases, while the sodium all leaves in the smelt; thus creating the opportunity to produce sulfur-rich and sulfur-lean white liquors for specialty pulping processes. A second major incentive of BLG is the production of a combustible product gas, rich in H2 and CO. This product gas (a.k.a. syngas) can be used in gas turbines for combined cycle power generation (which is twice as efficient as the steam cycle alone), or it can be used as a precursor to form liquid fuels, such as dimethyl ether or Fischer Tropsh diesel. There is drawback to BLG, which has the potential to become a third major incentive if this work is successful. The causticizing load is greater for gasification of black liquor than for combustion in a Tomlinson boiler. So implementing BLG in an existing mill would require costly increases to the causticizing capacity. In situ causticizing [within the gasifier] would handle the entire causticizing load and therefore eliminate the lime cycle entirely. Previous work by the author and others has shown that titanate direct causticizing (i.e. in situ) works quite well for high-temperature BLG (950C), but was limited to pressures below about 5 bar. It is desirable however to operate BLG at 20-30 bar for efficiency reasons related to either firing the syngas in a turbine, or catalytically forming liquid fuels. This work focused on achieving high direct causticizing yields at 20 bars pressure. The titanate direct causticizing reactions are inhibited by CO2. Previous work has shown that the partial pressure of CO2 should be kept below about 0.5 bar in order for the process to work. This translates to a total reactor pressure limit of about 5 bar for airblown BLG, and only 2 bar for O2-blown BLG. In this work a process was developed in which the CO2 partial pressure could be manipulated to a level under 0.5 bar with the total system pressure at 10 bar during O2-blown BLG. This fell short of our 20 bar goal but still represents a substantial increase in the pressure limit. A material and energy balance was performed, as well as first-pass economics based on capital and utilities costs. Compared to a reference case of using BLG with a conventional lime cycle [Larson, 2003], the IRR and NVP were estimated for further replacing the lime kiln with direct causticizing. The economics are strongly dependent on the price of lime kiln fuel. At $6/mmBTU the lime cycle is the clear choice. At $8/mmBTU the NPV is $10M with IRR of 17%. At $12/mmBTU the NPV is $45M with IRR of 36%. To further increase the total allowable pressure, the CO2 could be further decreased by further decreasing the temperature. Testing should be done at 750C. Also a small pilot should be built.

Scott Sinquefield; Xiaoyan Zeng, Alan Ball

2010-03-02T23:59:59.000Z

258

Energy implications of the thermal recovery of biodegradable municipal waste materials in the United Kingdom  

SciTech Connect (OSTI)

Highlights: > Energy balances were calculated for the thermal treatment of biodegradable wastes. > For wood and RDF, combustion in dedicated facilities was the best option. > For paper, garden and food wastes and mixed waste incineration was the best option. > For low moisture paper, gasification provided the optimum solution. - Abstract: Waste management policies and legislation in many developed countries call for a reduction in the quantity of biodegradable waste landfilled. Anaerobic digestion, combustion and gasification are options for managing biodegradable waste while generating renewable energy. However, very little research has been carried to establish the overall energy balance of the collection, preparation and energy recovery processes for different types of wastes. Without this information, it is impossible to determine the optimum method for managing a particular waste to recover renewable energy. In this study, energy balances were carried out for the thermal processing of food waste, garden waste, wood, waste paper and the non-recyclable fraction of municipal waste. For all of these wastes, combustion in dedicated facilities or incineration with the municipal waste stream was the most energy-advantageous option. However, we identified a lack of reliable information on the energy consumed in collecting individual wastes and preparing the wastes for thermal processing. There was also little reliable information on the performance and efficiency of anaerobic digestion and gasification facilities for waste.

Burnley, Stephen, E-mail: s.j.burnley@open.ac.uk [Open University, Walton Hall, Milton Keynes MK7 6AA (United Kingdom); Phillips, Rhiannon, E-mail: rhiannon.jones@environment-agency.gov.uk [Strategy Unit, Welsh Assembly Government, Ty Cambria, 29 Newport Road, Cardiff CF24 0TP (United Kingdom); Coleman, Terry, E-mail: terry.coleman@erm.com [Environmental Resources Management Ltd, Eaton House, Wallbrook Court, North Hinksey Lane, Oxford OX2 0QS (United Kingdom); Rampling, Terence, E-mail: twa.rampling@hotmail.com [7 Thurlow Close, Old Town Stevenage, Herts SG1 4SD (United Kingdom)

2011-09-15T23:59:59.000Z

259

Ethanol production from spent sulfite liquor fortified by hydrolysis of pulp mill primary clarifier sludge  

SciTech Connect (OSTI)

Some low-yield sulfite pulping operations ferment spent sulfite liquor (SSL) to remove biochemical oxygen demand associated with dissolved sugars while at the same time generating ethanol as a salable product. Simultaneous saccharification and fermentation (SSF) of primary clarifier sludge in a medium of SSL was proposed as a means of reducing the amount of sludge to be disposed of while at the same time increasing ethanol productivity. In this article, the option of fortifying existing SSL fermenting processes with the sugars produced via in situ enzymatic hydrolysis of sulfite primary clarifier sludge (PCS) has been explored. In 100% SSL PCS hydrolysis rates as high as 3.4 g/(L{center_dot}h) were observed at an initial enzyme loading of 10 filter paper units (FPU)/g PCS. To reduce the deleterious effects of glucose inhibition, single-stage SSF was carried out using cellulose enzymes and Saccharomyces cerevisiae. The production rate of ethanol in SSL was increased by as much as 25% through the SSF process. 12 refs., 4 figs., 2 tabs.

Moritz, J.W.; Duff, S.J.B. [Univ. of British Columbia, Vancouver (Canada)

1996-12-31T23:59:59.000Z

260

Mechanical Design of Steel Tubing for Use in Black Liquor Recovery Boilers  

SciTech Connect (OSTI)

Finite element models were developed for thermal-mechanical analysis of black liquor recovery boiler floor tubes. Residual stresses in boiler floors due to various manufacturing processes were analyzed. The modeling results were verified by X-ray and neutron diffraction measurements at room temperature on as-manufactured tubes as well as tubes after service. The established finite element models were then used to evaluate stress conditions during boiler operation. Using these finite element models, a parametric response surface study was performed to investigate the influence of material properties of the clad layer on stresses in the floor tubes during various boiler operating conditions, which yielded a generalized solution of stresses in the composite tube floors. The results of the study are useful for identifying the mechanisms of cracking experienced by recovery boilers. Based on the results of the response surface study, a recommendation was made for more suitable materials in terms of the analyzed mechanical properties. Alternative materials and manufacturing processes are being considered to improve the resistance to cracking and the in-service life of composite tubes. To avoid numerous FE stress-strain analyses of composite tubes made of different material combinations, a response surface study was performed that considered two essential mechanical properties of the clad material - coefficient of thermal expansion and yield stress - as independent variables. The response surface study provided a generalized solution of stresses in the floor in terms of the two selected parameters.

Taljat, B.; Zacharaia, T.; Wang, X.; Kesier, J.; Swindeman, R.; Hubbard, C.

1999-05-26T23:59:59.000Z

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Dynamic air deposited coatings for power and black liquor recovery boilers  

SciTech Connect (OSTI)

Dynamic Air Deposition (DyAir) is a novel coating method designed to protect the tubing of power and black liquor recovery boilers against corrosion attack at elevated temperatures. The method utilizes the energy of combustion of gaseous fuel and air to heat the powder material to a temperature just below its melting point and accelerate it over 600 m/s to form a coating. The Ni-Cr and Ni-Cr-Mo DyAir coatings revealed no gas permeability and extremely low oxygen content. Compared to the electric arc and HVOF-sprayed coatings, the DyAir coatings exhibited higher hardness and better crack resistance. During aging at 400 and 700 C the bond strength and crack resistance of the DyAir coatings increased dramatically due to intensive diffusion processes in absence of internal corrosion attack. The DyAir coatings revealed outstanding resistance to corrosion, such as sulfidation attack in presence of hydrochloric acid gas at 400 C, oxidation attack at 700 C and oxidation attack in presence of chlorine at 400 C.

Verstak, A.A.; Baranovski, V.E. [Advanced Surface Technologies Inc., Richmond, VA (United States)

1999-11-01T23:59:59.000Z

262

Black liquor combustion validated recovery boiler modeling: Final year report. Volume 5 (Appendix V)  

SciTech Connect (OSTI)

This project was initiated in October 1990, with the objective of developing and validating a new computer model of a recovery boiler furnace using a computational fluid dynamics (CFD) code specifically tailored to the requirements for solving recovery boiler flows, and using improved submodels for black liquor combustion based on continued laboratory fundamental studies. The key tasks to be accomplished were as follows: (1) Complete the development of enhanced furnace models that have the capability to accurately predict carryover, emissions behavior, dust concentrations, gas temperatures, and wall heat fluxes. (2) Validate the enhanced furnace models, so that users can have confidence in the predicted results. (3) Obtain fundamental information on aerosol formation, deposition, and hardening so as to develop the knowledge base needed to relate furnace model outputs to plugging and fouling in the convective sections of the boiler. (4) Facilitate the transfer of codes, black liquid submodels, and fundamental knowledge to the US kraft pulp industry. Volume 5 contains model validation simulations and comparison with data.

Grace, T.M.; Frederick, W.J.; Salcudean, M.; Wessel, R.A.

1998-08-01T23:59:59.000Z

263

Gasification behavior of carbon residue in bed solids of black liquor gasifier  

SciTech Connect (OSTI)

Steam gasification of carbon residue in bed solids of a low-temperature black liquor gasifier was studied using a thermogravimetric system at 3 bar. Complete gasification of the carbon residue, which remained unreactive at 600 C, was achieved in about 10 min as the temperature increased to 800 C. The rate of gasification and its temperature dependence were evaluated from the non-isothermal experiment results. Effects of particle size and adding H{sub 2} and CO to the gasification agent were also studied. The rate of steam gasification could be taken as zero order in carbon until 80% of carbon was gasified, and for the rest of the gasification process the rate appeared to be first order in carbon. The maximum rate of carbon conversion was around 0.003/s and the activation energy was estimated to be in the range of 230-300 kJ/mol. The particle size did not show significant effect on the rate of gasification. Hydrogen and carbon monoxide appeared to retard the onset of the gasification process. (author)

Preto, Fernando; Zhang, Xiaojie (Frank); Wang, Jinsheng [CANMET Energy Technology Centre, Natural Resources (Canada)

2008-07-15T23:59:59.000Z

264

Disposal of CCA-treated Wood: An Evaluation of  

E-Print Network [OSTI]

Disposal of CCA-treated Wood: An Evaluation of Existing and Alternative Management Options (FINAL CHARACTERISTICS OF CCA-TREATED WOOD ASH II.1 Sample Preparation 10 II.2 Laboratory Methods 15 II.3 Laboratory Results 24 CHAPTER III, SORTING TECHNOLOGIES FOR SEPARATING TREATED WOOD FROM UNTREATED WOOD III.1

Florida, University of

265

Wood Products Marketing And Value-Added Opportunities  

E-Print Network [OSTI]

Wood Products Marketing And Value-Added Opportunities Richard Vlosky, Ph.D. Professor, R.E. Taylor & Associates Ltd. Forest Industry Strategic Services & Publisher: WOOD Markets Monthly newsletter WOOD Markets 2002 - The Solid Wood Products Outlook. #501 - 543 Granville Street Vancouver, B

266

ORIGINAL PAPER M. Grosell C.M. Wood  

E-Print Network [OSTI]

ORIGINAL PAPER M. Grosell á C.M. Wood Branchial versus intestinal silver toxicity and uptake Hogstrand and Wood 1998; Wood et al. 1999 for reviews), much less is known about the exact toxic mechanisms primarily through the apical Na+ channel (Bury and Wood 1999) and targets the basolateral Na/K-AT- Pase

Grosell, Martin

267

1Wood Borer --WB-XX-W Department of Entomology  

E-Print Network [OSTI]

1Wood Borer -- WB-XX-W WB-02-W Department of Entomology America's Least Wanted Wood-Borers CHINESE under the bark and in dry dead wood and complete their development in two or more years. Adults emerge campestris (Faldermann) (Coleoptera: Cerambycidae), an Asian wood-boring beetle recorded in North America

Ginzel, Matthew

268

ALASKAN WOOD FROGS STOCK UP ON SOLUTES TO SURVIVE  

E-Print Network [OSTI]

Inside JEB i ALASKAN WOOD FROGS STOCK UP ON SOLUTES TO SURVIVE Outwardly, the tiny wood frog, Rana these wood frogs, which are native to Alaska, Canada and the northern USA, to unravel their secrets. Costanzo tolerance in a northern population of the wood frog. J. Exp. Biol. 216, 3461-3473. Nicola Stead THE GENETICS

Besansky, Nora J.

269

Original article A study on growth stresses, tension wood  

E-Print Network [OSTI]

Original article A study on growth stresses, tension wood distribution and other related wood variations of wood structure (specific gravity and pulp yield), and the transverse mechanical resistance of wood. To investigate growth stresses, longitudinal displacements after stress release were estimated

Paris-Sud XI, Université de

270

Codes of constant Lee or Euclidean weight Jay A. Wood  

E-Print Network [OSTI]

Codes of constant Lee or Euclidean weight Jay A. Wood Department of Mathematics, Computer Science & Statistics Purdue University Calumet Hammond, Indiana 46323--2094 USA wood@calumet.purdue.edu http://www.calumet.purdue.edu/public/math/wood Scholarly Research Awards. #12; JAY A. WOOD 1. Linear codes as modules Throughout this extended abstract

Wood, Jay

271

Wood of Giant Sequoia: Properties and Unique Characteristics1  

E-Print Network [OSTI]

Wood of Giant Sequoia: Properties and Unique Characteristics1 Douglas D. Piirto2 Abstract: Wood tree species. Wood properties such as specific gravity, various mechanical properties, extractive be considered for planting stock in managed production forests to increase future supplies of wood having

Standiford, Richard B.

272

1Wood Borer --WB-XX-W Department of Entomology  

E-Print Network [OSTI]

1Wood Borer -- WB-XX-W WB-04-W Department of Entomology America's Least Wanted Wood-Borers BLACK living trees. The wood- boring larvae cause structural damage that may make the trees susceptible). (Photo credit: Stanislaw Kinelski, Bugwood.org) #12;1-888-EXT-INFO · www.extension.purdue.edu 2Wood Borer

Ginzel, Matthew

273

Emerging Markets for Wood Energy Richard Vlosky, Director  

E-Print Network [OSTI]

· The Louisiana Forest Products Development Center · Wood-to-Energy · Wood Biomass · Energy Options · Current-based Biomass Energy #12;2/20/2014 5 Forest Landowner Opportunities and Challenges The U.S. South is the "wood2/20/2014 1 Emerging Markets for Wood Energy Richard Vlosky, Director Crosby Land & Resources

274

Environmental-performance research priorities: Wood products. Final report  

SciTech Connect (OSTI)

This report describes a research plan to establish environmental, energy, and economic performance measures for renewable building materials, and to identify management and technology alternatives to improve environmental performance in a cost-effective manner. The research plan is designed to: (1) collect environmental and economic data on all life-cycle stages of the materials, (2) ensure that the data follows consistent definitions and collection procedures, and (3) develop analytical procedures for life-cycle analysis to address environmental performance questions. The research will be subdivided into a number of individual project modules. The five processing stages of wood used to organize the research plan are: (1) resource management and harvesting; (2) processing; (3) design and construction of structures; (4) use, maintenance, and disposal; and (5) waste recycling. Individual research module descriptions are provided in the report, as well as assessment techniques, research standards and protocol, and research management. 13 refs., 5 figs., 3 tabs.

NONE

1998-01-15T23:59:59.000Z

275

Wood and Fiber Science, 36(1), 2004, pp. 107118 2004 by the Society of Wood Science and Technology  

E-Print Network [OSTI]

Wood and Fiber Science, 36(1), 2004, pp. 107­118 2004 by the Society of Wood Science and Technology FORMOSAN SUBTERRANEAN TERMITE RESISTANCE OF BORATE-MODIFIED STRANDBOARD MANUFACTURED FROM SOUTHERN WOOD, but not on termite mortality. Wood species showed no significant effect on the termite resistance. Correlations

276

Wood and Fiber Science, 37(1), 2005, pp. 95111 2004 by the Society of Wood Science and Technology  

E-Print Network [OSTI]

Wood and Fiber Science, 37(1), 2005, pp. 95­111 © 2004 by the Society of Wood Science and Technology SURFACE AND INTERFACIAL CHARACTERIZATION OF WOOD-PVC COMPOSITE: IMAGING MORPHOLOGY AND WETTING wetting behavior of wood-PVC composites in this study. Two-dimensional and time-dependent profiles

277

Wood and Fiber Science, 36(1), 2004, pp. 1725 2004 by the Society of Wood Science and Technology  

E-Print Network [OSTI]

Wood and Fiber Science, 36(1), 2004, pp. 17­25 2004 by the Society of Wood Science and Technology FUNDAMENTALS OF VERTICAL DENSITY PROFILE FORMATION IN WOOD COMPOSITES. PART III. MDF DENSITY FORMATION DURING of Wood Science and Forest Products 210 Cheatham Hall, Virginia Tech Blacksburg, VA 24061-0323 and Timothy

Wang, Siqun

278

Wood and Fiber Science, 35(4), 2003, pp. 482498 2003 by the Society of Wood Science and Technology  

E-Print Network [OSTI]

Wood and Fiber Science, 35(4), 2003, pp. 482­498 2003 by the Society of Wood Science and Technology. INTRODUCTION Strength properties of wood-based compos- ites are related to mean panel density and the density of the average panel density (Kruse et al. 2000). Modeling for the spatial structure of wood composites

279

Wood and Fiber Science, 37(2), 2005, pp. 207212 2005 by the Society of Wood Science and Technology  

E-Print Network [OSTI]

Wood and Fiber Science, 37(2), 2005, pp. 207­212 © 2005 by the Society of Wood Science. Leichti Associate Professor and Barbara L. Gartner Professor Department of Wood Science and Engineering purposes that characterize smaller sections of wood. Moreover, theASTM standards spec- ify loading

Lachenbruch, Barbara

280

Wood and Fiber Science, 35(3), 2003, pp. 381396 2003 by the Society of Wood Science and Technology  

E-Print Network [OSTI]

Wood and Fiber Science, 35(3), 2003, pp. 381­396 2003 by the Society of Wood Science and Technology a feasible application of both methods in wood composite research and in a real-time quality control system wood composites widely 1 This paper (NO: 02-40-0457) is published with the approval of the Director

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Wood and Fiber Science, 36(1), 2004, pp. 7183 2004 by the Society of Wood Science and Technology  

E-Print Network [OSTI]

Wood and Fiber Science, 36(1), 2004, pp. 71­83 2004 by the Society of Wood Science and Technology (Lenth and Kamke 1996). Interest in predicting the consolidation be- havior of wood strand mats has led that strand geometry affects the relative void volume in a mat. #12;72 WOOD AND FIBER SCIENCE, JANUARY 2004, V

282

North American wood markets hit by United States housing crash North American wood markets hit by United States housing crash  

E-Print Network [OSTI]

themes were: 1. softwood market developments, and 2. wood energy and wood mobilization. The main use of wood for energy throughout the UNECE region, driven by policy measures and high oil prices development, which will have to try to balance the needs of the established wood products sector and the bio-energy

283

Comparisons of four categories of waste recycling in China's paper industry based on physical input-output life-cycle assessment model  

SciTech Connect (OSTI)

Highlights: Black-Right-Pointing-Pointer Using crop straws and wood wastes for paper production should be promoted. Black-Right-Pointing-Pointer Bagasse and textile waste recycling should be properly limited. Black-Right-Pointing-Pointer Imports of scrap paper should be encouraged. Black-Right-Pointing-Pointer Sensitivity analysis, uncertainties and policy implications are discussed. - Abstract: Waste recycling for paper production is an important component of waste management. This study constructs a physical input-output life-cycle assessment (PIO-LCA) model. The PIO-LCA model is used to investigate environmental impacts of four categories of waste recycling in China's paper industry: crop straws, bagasse, textile wastes and scrap paper. Crop straw recycling and wood utilization for paper production have small total intensity of environmental impacts. Moreover, environmental impacts reduction of crop straw recycling and wood utilization benefits the most from technology development. Thus, using crop straws and wood (including wood wastes) for paper production should be promoted. Technology development has small effects on environmental impacts reduction of bagasse recycling, textile waste recycling and scrap paper recycling. In addition, bagasse recycling and textile waste recycling have big total intensity of environmental impacts. Thus, the development of bagasse recycling and textile waste recycling should be properly limited. Other pathways for reusing bagasse and textile wastes should be explored and evaluated. Moreover, imports of scrap paper should be encouraged to reduce large indirect impacts of scrap paper recycling on domestic environment.

Liang Sai [School of Environment, State Key Joint Laboratory of Environment Simulation and Pollution Control, Tsinghua University, Beijing 100084 (China); Zhang, Tianzhu, E-mail: zhangtz@mail.tsinghua.edu.cn [School of Environment, State Key Joint Laboratory of Environment Simulation and Pollution Control, Tsinghua University, Beijing 100084 (China); Xu Yijian [School of Environment, State Key Joint Laboratory of Environment Simulation and Pollution Control, Tsinghua University, Beijing 100084 (China); China Academy of Urban Planning and Design, Beijing 100037 (China)

2012-03-15T23:59:59.000Z

284

BIOLOGICAL ENGINEERING Program of Study  

E-Print Network [OSTI]

reaction engineering in wood pulping and pulp bleaching, char bed modeling, black liquor gasification

Thomas, Andrew

285

Wood-Burning Heating System Deduction  

Broader source: Energy.gov [DOE]

This statute allows individual taxpayers a deduction for the purchase and installation of a wood-burning heating system. The deduction is equal to the total cost of purchase and installation for...

286

From the Woods to the Refinery  

Broader source: Energy.gov [DOE]

Breakout Session 2DBuilding Market Confidence and Understanding II: Carbon Accounting and Woody Biofuels From the Woods to the Refinery Stephen S. Kelley, Principal and Department Head, Department of Forest Biomaterials, North Carolina State University

287

Residential Wood Heating Fuel Exemption (New York)  

Broader source: Energy.gov [DOE]

New York exempts retail sales of wood used for residential heating purposes from the state sales tax. The law also permits local governments (municipalities and counties) to grant an exemption from...

288

Wood Fired Steam Plants in Georgia  

E-Print Network [OSTI]

suppliers. Based upon the designs submitted and subsequent negotiations, the Applied Engineering Company (APCO) in Orangeburg, South Carolina, was chosen to do the job. Applied Engineering has been working on wood gasification systems for several years...-20, 1983 company has a large manufacturing plant in Orange burg and is fully capable of fabricating large pressure vessels and heavy industrial equipment. The overall wood gasification system is shown in Figure 1. The fuel for the gasifier is green...

Bulpitt, W. S.

1983-01-01T23:59:59.000Z

289

A Wood-Fired Gas Turbine Plant  

E-Print Network [OSTI]

A WOOD-FIRED GAS TURBINE PLANT Sam H. Powell, Tennessee Valley Authority, Chattanooga, Tennessee Joseph T. Hamrick, Aerospace Research Corporation, RBS Electric, Roanoke, VA Abstract This paper covers the research and development of a wood...-fired gas turbine unit that is used for generating electricity. The system uses one large cyclonic combustor and a cyclone cleaning system in series to provide hot gases to drive an Allison T-56 aircraft engine (the industrial version is the 50l-k). A...

Powell, S. H.; Hamrick, J. T.

290

Pyrometric temperature measurement method and apparatus for measuring particle temperatures in hot furnaces: Application to reacting black liquor  

SciTech Connect (OSTI)

A specialized two-color pyrometric method has been developed for the measurement of particle surface temperatures in hot, radiating environments. In this work, the method has been applied to the measurement of surface temperatures of single reacting black liquor char particles in an electrically heated muffle furnace. Black liquor was introduced into the hot furnace as wet droplets. After drying, the resulted particles were processed in different atmospheres corresponding to combustion, pyrolysis, and gasification at furnace temperatures of 700{endash}900{degree}C. The pyrometric measurement is performed using two silicon photodiode detectors and 10 nm bandpass filters centered at 650 and 1050 nm. Thermal radiation is transferred using an uncooled fiberoptic probe brought into the vicinity of the char particle. The key features of the pyrometric apparatus and analysis method are: (1) Single particle temperature is resolved temporally at high speed. (2) The thermal radiation originating from the furnace and reflected by the particle is accounted for in the measurement of the surface temperature. (3) Particle temperatures above or below the furnace temperature can be measured without the need of a cooled background assisting the measurement in the hot furnace. To accomplish this, a minimum particle size is needed that is a function of the temperature difference between the particle and furnace. Particles cooler than the furnace can be measured if their diameter is more than 0.7 mm. Surface temperatures of 300{endash}400{degree}C above the furnace temperature were measured during combustion of black liquor char particles in air. In atmospheres corresponding to gasification, endothermic reactions occurred, and char temperature remained typically 40{degree} below the furnace temperature. {copyright} {ital 1996 American Institute of Physics.}

Stenberg, J. [Tampere University of Technology, P.O. Box 692, Tampere SF-33101 (Finland)] [Tampere University of Technology, P.O. Box 692, Tampere SF-33101 (Finland); Frederick, W.J. [Oregon State University, Gleeson 103, Corvallis, Oregon 97331 (United States)] [Oregon State University, Gleeson 103, Corvallis, Oregon 97331 (United States); Bostroem, S. [Abo Akademi University, Lemminkaeisenkatu 14-18 B, Turku SF-20520 (Finland)] [Abo Akademi University, Lemminkaeisenkatu 14-18 B, Turku SF-20520 (Finland); Hernberg, R. [Tampere University of Technology, P.O. Box 692, Tampere SF-33101 (Finland)] [Tampere University of Technology, P.O. Box 692, Tampere SF-33101 (Finland); Hupa, M. [Abo Akademi University, Lemminkaeisenkatu 14-18 B, Turku SF-20520 (Finland)] [Abo Akademi University, Lemminkaeisenkatu 14-18 B, Turku SF-20520 (Finland)

1996-05-01T23:59:59.000Z

291

Causes and solutions for cracking of coextruded and weld overlay floor tubes in black liquor recovery boilers  

SciTech Connect (OSTI)

Cracking of coextruded, black liquor recovery boiler floor tubes is both a safety and an economic issue to mill operators. In an effort to determine the cause of the cracking and to identify a solution, extensive studies, described in this and three accompanying papers, are being conducted. In this paper, results of studies to characterize both the cracking and the chemical and thermal environment are reported. Based on the results described in this series of papers, a possible mechanism is presented and means to lessen the likelihood of cracking or to totally avoid cracking of floor tubes are offered.

Keiser, J.R.; Taljat, B.; Wang, X.L. [and others

1998-09-01T23:59:59.000Z

292

Electrolysis of weak black liquor: Part II. Effect of process parameters on the energy efficiency of the electrolytic cell  

SciTech Connect (OSTI)

A laboratory study of the effect of eight process parameters on the performance of the electrolytic cell when electrolyzing weak black liquor (WBL) showed that current density and temperature are critical to the operation. These two variables showed an interaction effect upon the operation of the cell. The addition of sodium sulfate to the WBL was beneficial to the energy efficiency. No chlorine gas was produced when electrolyzing WBL containing sodium chloride within the pH range of 5.4 to 13.

Cloutier, J.N.; Azarniouch, M.K.; Callender, D.

1994-12-31T23:59:59.000Z

293

Closed Loop Recycling of PreservativeClosed Loop Recycling of Preservative Treated WoodTreated Wood  

E-Print Network [OSTI]

Closed Loop Recycling of PreservativeClosed Loop Recycling of Preservative Treated WoodTreated Wood.2 million cubic meters) of lumber treated with CCA are produced annually in the United States (Micklewright 1998). ·In 1997, for example, some 581.4 million cu. ft. was treated with waterborne preservatives

294

European Panel FederationEuropean Panel Federation viewpoint on wood energy policiesviewpoint on wood energy policies  

E-Print Network [OSTI]

--called "green energy"called "green energy" ·· Simultaneously, the taxes on the use of fossil fuelsSimultaneously, the taxes on the use of fossil fuels increaseincrease ·· This leads to increasing costs for wood productsIncreasing use of wood for energy production ·· Governments in Europe are granting subsidies for

295

Study of soluble scale fouling control in high solids black liquor concentrators. Progress report, quarter 5 (October 1, 1999 - December 31, 1999)  

SciTech Connect (OSTI)

During this quarter, work has finally resumed on the black liquor solubility experiments, but no new data have been generated. The crystallization experiments with inorganic model solutions have been completed, and crystallization experiments with kraft black liquor have been started. The Annular Test Cell apparatus is now fully operational, while construction of the falling film evaporator pilot plant is nearly complete. Startup of this unit is planned for late in Quarter 6. In the CFD model development work, the relaxation of simplifying assumptions in the falling film model have been completed, and expressions were developed to estimate film velocity/film Reynolds number relations. Also, thin film data taken for a range of conventional fluids were compared to predictions using selected methods, and attempts were initiated to extrapolate to approximate black liquor evaporator conditions.

W.J. Frederick; F. Chen; G. Hsieh; S. Lien; R.W. Murphy; R.W. Rousseau; W. Schmidl

2000-01-01T23:59:59.000Z

296

Daniel Wood | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProvedDecember 2005Department ofDOE AccidentWaste Isolation Pilotat4DoublesDaniel

297

HELSINKI UNIVERSITY OF TECHNOLOGY ENE-47.153 NITROGEN #1NITROGEN #1  

E-Print Network [OSTI]

fuels Biomasses & waste - derived fuels Coal 0.5 ­ 3 Wood 0.1 ­ 0.5 Bark ~ 0.5 Oil Petroleum coke ~ 3 Auto shredder residue (ASR) ~ 0.5 Leather waste ~ 12 OrimulsionTM ~ 4 Black liquor solids

Zevenhoven, Ron

298

Total organic carbon as an indicator of wood delignification  

SciTech Connect (OSTI)

Kraft pulping experiments were performed in a 12-liter electrically heated laboratory digester to determine pulp yields and residual lignin content (kappa number) as a function of time. Samples of the pulp and the black liquor were analyzed for total organic carbon (TOC) content by oxidizing the samples in a combustion furnace and measuring the released CO/sub 2/ gravimetrically. The experimental data on TOC were correlated with kappa number and yield. Results can be explained satisfactorily using a mathematical model based upon the principle of conservation of mass. The TOC content of black liquor appears to be a useful parameter for batch digester control. 17 references.

Genco, J.M.; Hassler, J.C.; Busayasakul, N.

1984-07-01T23:59:59.000Z

299

Biohazardous Waste Disposal Guidelines Sharps Waste Solid Lab Waste Liquid Waste Animals Pathological Waste  

E-Print Network [OSTI]

waste (i.e, mixture of biohazardous and chemical or radioactive waste), call Environment, Health2/2009 Biohazardous Waste Disposal Guidelines Sharps Waste Solid Lab Waste Liquid Waste Animals Pathological Waste Description Biohazard symbol Address: UCSD 200 West Arbor Dr. San Diego, CA 92103 (619

Tsien, Roger Y.

300

Controlling emissions from a black liquor fluidized bed evaporator (Copeland reactor) using a regenerative thermal oxidizer and a prefilter  

SciTech Connect (OSTI)

This paper reports on an intriguing pilot project developed to control air emissions from a pulp mill. Testing is complete, and the results show favorable emissions reductions. Stone Container Corporation, REECO, NCASI, the Ohio DEP, and the US EPA, have all worked together and approved the installation of control equipment, for VOC and HAP emissions under Presumptive MACT, setting the standard for the Copeland Reactor process in a semi chem pulp mill. The equipment, once operational, will reduce VOC and CO emissions by greater than 90%. This installation will be done at one seventh the cost of the significant process modifications required to accomplish the same emission reduction. In addition, increased process operating efficiency will be achieved with the use of an energy recovery system. The process is a black liquor fluidized bed boiler, which is used to generate sodium carbonate from the black liquor. The vapor emissions were high in VOCs, CO and particulate. After much study and testing, a wet electrostatic precipitator was chosen as the filter system for particulate control, followed by a regenerative thermal oxidizer for VOC and HAP control, finally an air-to-air heat exchanger is being used to preheat the combustion air entering the process.

Grzanka, R.

1997-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Black liquor combustion validated recovery boiler modeling: Final year report. Volume 2 (Appendices I, section 5 and II, section 1)  

SciTech Connect (OSTI)

This project was initiated in October 1990, with the objective of developing and validating a new computer model of a recovery boiler furnace using a computational fluid dynamics (CFD) code specifically tailored to the requirements for solving recovery boiler flows, and using improved submodels for black liquor combustion based on continued laboratory fundamental studies. The key tasks to be accomplished were as follows: (1) Complete the development of enhanced furnace models that have the capability to accurately predict carryover, emissions behavior, dust concentrations, gas temperatures, and wall heat fluxes. (2) Validate the enhanced furnace models, so that users can have confidence in the predicted results. (3) Obtain fundamental information on aerosol formation, deposition, and hardening so as to develop the knowledge base needed to relate furnace model outputs to plugging and fouling in the convective sections of the boiler. (4) Facilitate the transfer of codes, black liquid submodels, and fundamental knowledge to the US kraft pulp industry. Volume 2 contains the last section of Appendix I, Radiative heat transfer in kraft recovery boilers, and the first section of Appendix II, The effect of temperature and residence time on the distribution of carbon, sulfur, and nitrogen between gaseous and condensed phase products from low temperature pyrolysis of kraft black liquor.

Grace, T.M.; Frederick, W.J.; Salcudean, M.; Wessel, R.A.

1998-08-01T23:59:59.000Z

302

Final Report: Development of Renewable Microbial Polyesters for Cost Effective and Energy- Efficient Wood-Plastic Composites  

SciTech Connect (OSTI)

In this project, we proposed to produce wood fiber reinforced thermoplastic composites (WFRTCs) using microbial thermoplastic polyesters in place of petroleum-derived plastic. WFRTCs are a rapidly growing product area, averaging a 38% growth rate since 1997. Their production is dependent on substantial quantities of petroleum based thermoplastics, increasing their overall energy costs by over 230% when compared to traditional Engineered Wood Products (EWP). Utilizing bio-based thermoplastics for these materials can reduce our dependence on foreign petroleum. We have demonstrated that biopolymers (polyhydroxyalkanoates, PHA) can be successfully produced from wood pulping waste streams and that viable wood fiber reinforced thermoplastic composite products can be produced from these materials. The results show that microbial polyester (PHB in this study) can be extruded together with wastewater-derived cell mass and wood flour into deck products having performance properties comparable to existing commercial HDPE/WF composite products. This study has thus proven the underlying concept that the microbial polyesters produced from waste effluents can be used to make cost-effective and energy-efficient wood-plastic composites. The cost of purified microbial polyesters is about 5-20 times that of HDPE depending on the cost of crude oil, due to high purification (40%), carbon substrate (40%) and sterilized fermentation (20%) costs for the PHB. Hence, the ability to produce competitive and functional composites with unpurified PHA-biomass mixtures from waste carbon sources in unsterile systemswithout cell debris removalis a significant step forward in producing competitive value-added structural composites from forest products residuals using a biorefinery approach. As demonstrated in the energy and waste analysis for the project, significant energy savings and waste reductions can also be realized using this approach. We recommend that the next step for development of useful products using this technology is to scale the technology from the 700-L pilot reactor to a small-scale production facility, with dedicated operation staff and engineering controls. In addition, we recommend that a market study be conducted as well as further product development for construction products that will utilize the unique properties of this bio-based material.

Thompson, David N.; Emerick, Robert W.; England, Alfred B.; Flanders, James P.; Loge, Frank J.; Wiedeman, Katherine A.; Wolcott, Michael P.

2010-03-31T23:59:59.000Z

303

User Guide for Disposal of Unwanted Items and Electronic Waste  

E-Print Network [OSTI]

is the Recycle department at 502-6808 o For more information on the UCSF Sustainability program visit: http://sustainability.ucsf.edu/stay_informed/recycling_resources consulting support Ensuring proper reuse, recycle, or disposal Maintaining regulatory and policy compliance metal and wood o Waste/trash management o Recycle, reuse or disposal of materials D&S does not process o

Mullins, Dyche

304

Guide to Using Wood Ash as an Agricultural Soil Amendment  

E-Print Network [OSTI]

from larger commercial sources such as wood-burning biomass plants which produce heat or electricity in the soil. Wood ash is more soluble and reactive than ground limestone, and brings about a Benefits Recycles

New Hampshire, University of

305

A study of the molecular mechanics of wood cell walls  

E-Print Network [OSTI]

Wood is the original structural material, developed by nature to support tall plants. Every advantageous feature of wood as used in artificial structures is rooted in the plant's evolved capability to withstand the conditions ...

Adler, David, S.M. (David C.). Massachusetts Institute of Technology

2013-01-01T23:59:59.000Z

306

Wood-Fiber/High-Density-Polyethylene Composites: Compounding Process  

E-Print Network [OSTI]

Wood-Fiber/High-Density-Polyethylene Composites: Compounding Process J. Z. Lu,1 Q. Wu,1 I. I parameters for the wood-fiber/high-density-polyethylene blends at 60 rpm were a temperature of 180°C

307

Drawing a Graph in a Hypercube David R. Wood  

E-Print Network [OSTI]

Drawing a Graph in a Hypercube David R. Wood #3; Departament de Matem#18;atica Aplicada II Universitat Polit#18;ecnica de Catalunya Barcelona, Spain david.wood@upc.edu Submitted: Nov 16, 2004; Accepted

Wood, David R.

308

Ring Involutions and Self-Dual Codes Jay A. Wood  

E-Print Network [OSTI]

Ring Involutions and Self-Dual Codes Jay A. Wood Department of Mathematics Western Michigan University jay.wood@wmich.edu AMS meeting, Lexington, Kentucky March 27, 2010 #12;Acknowledgments Much

Wood, Jay

309

RELATIVE ONE-WEIGHT LINEAR CODES JAY A. WOOD  

E-Print Network [OSTI]

RELATIVE ONE-WEIGHT LINEAR CODES JAY A. WOOD In memory of Professor F. E. P. Hirzebruch, 17 October University. 1 #12;2 JAY A. WOOD G thus defines a linear functional (a "coordinate functional") on the k

Wood, Jay

310

Generalizing Halfspaces 1 Eugene Fink 2 Derick Wood 3  

E-Print Network [OSTI]

Generalizing Halfspaces 1 Eugene Fink 2 Derick Wood 3 Abstract Restricted­orientation convexity, as a generalization of standard convexity [9]. Rawlins, Wood, and Schuierer studied planar O­convex sets

Fink, Eugene

311

Drawing a Graph in a Hypercube David R. Wood  

E-Print Network [OSTI]

Drawing a Graph in a Hypercube David R. Wood Departament de Matem`atica Aplicada II Universitat Polit`ecnica de Catalunya Barcelona, Spain david.wood@upc.edu Submitted: Nov 16, 2004; Accepted: Aug 11

Wood, David R.

312

Wood mobilization: la nuova frontiera delle politiche forestali  

E-Print Network [OSTI]

8-03-2013 1 Wood mobilization: la nuova frontiera delle politiche forestali europee CONAF settore forestale, un nuovo tema-guida: Wood Mobilization Task Force Foreste2. Green o grey? 3. Politica

Pettenella, Davide

313

XML Structure Compression Mark Levene and Peter Wood  

E-Print Network [OSTI]

XML Structure Compression Mark Levene and Peter Wood Birkbeck College, University of London London WC1E 7HX, U.K. {m.levene,p.wood}@dcs.bbk.ac.uk Abstract XML is becoming the universal language

Levene, Mark

314

Characters and finite Frobenius rings Jay A. Wood  

E-Print Network [OSTI]

Characters and finite Frobenius rings Jay A. Wood Department of Mathematics Western Michigan-modules; 3. R = R as right R-modules. Due independently to Hirano, 1997, and Wood, 1999. JW (WMU) Frobenius

Wood, Jay

315

Clean-Burning Wood Stove Grant Program (Maryland)  

Broader source: Energy.gov [DOE]

The Maryland Energy Administration (MEA) now offers the Clean Burning Wood Stove Grant program as part of its Residential Clean Energy Grant Program. The Clean Burning Wood Stove Grant program...

316

FAO Forestry Department Wood Energy WISDOM East Africa  

E-Print Network [OSTI]

percent of total African wood consumption. In the countries of East Sahelian Africa, Central Africa energy consumption (FAO 1999). Numerous studies have analyzed the wFAO ­ Forestry Department ­ Wood Energy WISDOM ­ East Africa Woodfuel Integrated Supply

317

International Trade of Wood Pellets (Brochure)  

SciTech Connect (OSTI)

The production of wood pellets has increased dramatically in recent years due in large part to aggressive emissions policy in the European Union; the main markets that currently supply the European market are North America and Russia. However, current market circumstances and trade dynamics could change depending on the development of emerging markets, foreign exchange rates, and the evolution of carbon policies. This fact sheet outlines the existing and potential participants in the wood pellets market, along with historical data on production, trade, and prices.

Not Available

2013-05-01T23:59:59.000Z

318

Volatile constituents in a wood pyrolysis oil  

E-Print Network [OSTI]

Science VOLATILE CONSTITUTENTS IN A WOOD PYROLYSIS OIL A Thesis SHIH-CHIEN LIN Appro d as to style and content by: (Chairman of Committee) Head of epa tmen (Member Member Nay 1978 442936 ABSTRACT Volatile Constituents in a Wood Pyrolysis Oil.../120 Supelcoport. Other trace constituents of volatile acid were also 'dentifi="' by trap- ping the substances from the C. C. column into i: n;- 0-sh ped capillary tube and subjecting to mass spectrometry. The corrosivity of pyrolysis oil and it, volati'e acids...

Lin, Shih-Chien

1978-01-01T23:59:59.000Z

319

Wood Fuel LP | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey Flats Geothermal AreaarticleWood Fuel LP Name: Wood

320

Urban Wood-Based Bio-Energy Systems in Seattle  

SciTech Connect (OSTI)

Seattle Steam Company provides thermal energy service (steam) to the majority of buildings and facilities in downtown Seattle, including major hospitals (Swedish and Virginia Mason) and The Northwest (Level I) Regional Trauma Center. Seattle Steam has been heating downtown businesses for 117 years, with an average length of service to its customers of 40 years. In 2008 and 2009 Seattle Steam developed a biomass-fueled renewable energy (bio-energy) system to replace one of its gas-fired boilers that will reduce greenhouse gases, pollutants and the amount of waste sent to landfills. This work in this sub-project included several distinct tasks associated with the biomass project development as follows: a. Engineering and Architecture: Engineering focused on development of system control strategies, development of manuals for start up and commissioning. b. Training: The project developer will train its current operating staff to operate equipment and facilities. c. Flue Gas Clean-Up Equipment Concept Design: The concept development of acid gas emissions control system strategies associated with the supply wood to the project. d. Fuel Supply Management Plan: Development of plans and specifications for the supply of wood. It will include potential fuel sampling analysis and development of contracts for delivery and management of fuel suppliers and handlers. e. Integrated Fuel Management System Development: Seattle Steam requires a biomass Fuel Management System to track and manage the delivery, testing, processing and invoicing of delivered fuel. This application will be web-based and accessed from a password-protected URL, restricting data access and privileges by user-level.

Stan Gent, Seattle Steam Company

2010-10-25T23:59:59.000Z

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Oil palm vegetation liquor: a new source of phenolic bioactives Ravigadevi Sambanthamurthi1  

E-Print Network [OSTI]

teratological studies on rats up to the third generation and did not find any congenital anomalies. Thus for harvesting water-soluble antioxidants from oil palm has become available(12,14­17) . During the palm oil milling process, water-soluble pheno- lics are discarded in the waste stream, amounting to 85 million tons

Sinskey, Anthony J.

322

The Storage and Seasoning of Pecan Bud Wood.  

E-Print Network [OSTI]

be returned to cold storage and will remain ready for use at a later date. It has been found that bud wood cut late in the dormant period seasons in a shorter time than that cut early. Bud wood of the Delmas variety seasons more readiIy than that of Stuart... _._-_._.--__..__------~-..._..--_...._.--_.....-. Relation of Time of Cutting Bud Wood to Seasoning ._.__....._._-___._------------ ., Relative Response of Stuart and Delmas in Seasoning _---..__._.__....._.---....-....--.- 10 Number of Days for Seasoning Bud Wood During Different Months .... 12 Storage...

Brison, Fred R. (Fred Robert)

1933-01-01T23:59:59.000Z

323

Landfill Disposal of CCA-Treated Wood with Construction and  

E-Print Network [OSTI]

Landfill Disposal of CCA-Treated Wood with Construction and Demolition (C&D) Debris: Arsenic phased out of many residential uses in the United States, the disposal of CCA-treated wood remains. Catastrophic events have also led to the concentrated disposal of CCA-treated wood, often in unlined landfills

Florida, University of

324

Deplump for Streaming Data Nicholas Bartlett Frank Wood  

E-Print Network [OSTI]

Deplump for Streaming Data Nicholas Bartlett Frank Wood Department of Statistics, Columbia of discrete sequences called the sequence memoizer [Wood et al., 2009]. Gasthaus et al. showed that although was reposed on a sequence memo- izer [Wood et al., 2009] whose space complexity was linear in the length

Wood, Frank

325

Wood Products Identification by Internal Characteristics Readings C. FUENTEALBA1  

E-Print Network [OSTI]

Wood Products Identification by Internal Characteristics Readings C. FUENTEALBA1 , C. SIMON2 , D.fuentealba@cran.uhp-nancy.fr 5 LERMAB - Wood Research Laboratory, Epinal, France, e-mail: daniel- proving control of production tools and reacting to their defi- ciencies. For wood industries

Boyer, Edmond

326

Wood in rivers: interactions with channel morphology and processes  

E-Print Network [OSTI]

Editorial Wood in rivers: interactions with channel morphology and processes No doubt about it, wood complicates fluvial geo- morphology. It messes up nice tidy streams, compli- cates quantitative through the study of channels lacking a substantial load of wood debris (Leopold et al., 1964

Montgomery, David R.

327

Using Wood Quality Measures to Evaluate Second-Growth Redwood  

E-Print Network [OSTI]

553 Using Wood Quality Measures to Evaluate Second-Growth Redwood Stephen L. Quarles1 and Yana stability, durability, microfibril angle, redwood, wood quality Introduction Redwood has long been a valued" or "resistant or very resistant" (Wood Handbook 1999). 1 University of California Cooperative Extension (Advisor

Standiford, Richard B.

328

Frederic Wood Compiled by Michael W. Pidgeon (1985)  

E-Print Network [OSTI]

Frederic Wood fonds Compiled by Michael W. Pidgeon (1985) University of British Columbia Archives Description Frederic Wood fonds. ­ 1915-1973. 33 cm of textual records. 22 photographs. Biographical Sketch Born in Victoria, B.C., Frederic Gordon Campbell Wood (1887-1976) enrolled in the first class

Handy, Todd C.

329

Surface light fields for 3D photography Daniel N. Wood  

E-Print Network [OSTI]

Surface light fields for 3D photography Daniel N. Wood A dissertation submitted in partial This is to certify that I have examined this copy of a doctoral dissertation by Daniel N. Wood and have found for 3D photography by Daniel N. Wood Chair of Supervisory Committee: Associate Professor Brian L

Washington at Seattle, University of

330

Wood Engineering Education Trends and Challenges Rakesh Gupta1  

E-Print Network [OSTI]

Wood Engineering Education ­ Trends and Challenges Rakesh Gupta1 and Vijaya Gopu2 1 Member ASCE, Associate Professor, Department of Wood Science and Engineering, Oregon State University, Corvallis of the factors impacting the wood engineering/design education in the U.S. has been presented. The actions

Cox, Dan

331

Wood Science and Nanotechnology: Overview and Our Efforts  

E-Print Network [OSTI]

Wood Science and Nanotechnology: Overview and Our Efforts Siqun Wang, Ph.D. Department of Forestry. Bot. 17, 543-588 (1886). Wang UT CRC #12;Wood Structure MICROFIBRIL STRUCTURE CRYSTALLINE REGIONS wood fibers under axial tensile strain Nature 1971; 229:252-3 Page DH, EI-Hosseiny F., Winkler K. Wang

Gray, Matthew

332

Wood 1 19th Annual AIAA/USU  

E-Print Network [OSTI]

Wood 1 19th Annual AIAA/USU Conference on Small Satellites SSC05-IV-03 Adopting Internet standards for orbital use Lloyd Wood Cisco Systems Global Defense, Space and Security Bedfont Lakes, London, UK; +44. #12;Wood 2 19th Annual AIAA/USU Conference on Small Satellites In June 2004, after lying dormant while

Wood, Lloyd

333

Robert Wood Professor of Engineering and Applied Sciences at  

E-Print Network [OSTI]

Robert Wood Professor of Engineering and Applied Sciences at Harvard's School of Engineering and Applied Sciences Mechanical Engineering Robert Wood is the Charles River Professor of Engineering member of the Wyss Institute for Biologically Inspired Engineering. Prof. Wood completed his M.S. and Ph

Lin, Xi

334

Wood ants use resin to protect themselves against pathogens  

E-Print Network [OSTI]

Wood ants use resin to protect themselves against pathogens Michel Chapuisat1,*, Anne Oppliger2. Wood ants, Formica paralugubris, commonly bring back pieces of solidified coniferous resin of larvae exposed to the entomopathogenic fungus Metarhizium anisopliae. These results show that wood ants

Lehmann, Laurent

335

Codes of constant Lee or Euclidean weight Jay A. Wood  

E-Print Network [OSTI]

Codes of constant Lee or Euclidean weight Jay A. Wood Department of Mathematics, Computer Science & Statistics Purdue University Calumet Hammond, Indiana 46323 2094 USA wood@calumet.purdue.edu http: www.calumet.purdue.edu public math wood Abstract. Carlet 2 has determined the linear codes over Z=4 of constant Lee weight

Wood, Jay

336

Wood September 28, 2002 DEPARTMENT OF MATERIALS SCIENCE  

E-Print Network [OSTI]

Wood September 28, 2002 1 DEPARTMENT OF MATERIALS SCIENCE AND ENGINEERING CARNEGIE MELLON: Microstructure-Sensitive Mechanical Properties #12;Wood September 28, 2002 2 Introduction Reading will also have an opportunity to perform similar experiments on various types of wood. These will illustrate

Rollett, Anthony D.

337

Wood Density and Growth Conifers Introduced to Hawaii  

E-Print Network [OSTI]

Wood Density and Growth of Some Conifers Introduced to Hawaii Roger G. Skolmen U . S . F O R E - Berkeley, California Forest Service - U. S. Department of Agriculture #12;Skolmen, Roger G. 1963. Wood Expt. Sta. 20 pp., illus. (U.S. Forest Serv. Res Paper PSW-12) The specific gravity of the wood of 14

Standiford, Richard B.

338

Center for Wood Utilization Progress Report for Fiscal Year 2010  

E-Print Network [OSTI]

, Asia, and Latin America. A business plan was developed to capture 1% of the $2.5 billion h manufacturing; and (c) lead to more efficient use of renewable wood-based materials for the benefit of Americans. Renewable wood is essential to human existence. Wood utilization research is critical to national needs

Tullos, Desiree

339

Fundamental study of black liquor gasification kinetics using a pressurized entrained-flow reactor (PEFR). Quarterly progress report for the period July 1999 to September 1999  

SciTech Connect (OSTI)

The goal of the program is to identify the optimal operating window for black liquor gasification. The goals during this year are to prepare the PEFR for operation, conduct a series of preliminary screening tests to bracket BLG operating conditions, and develop a process model that can guide identification of the optimal operating window.

NONE

1999-10-29T23:59:59.000Z

340

High-solids black liquor firing in pulp and paper industry Kraft recovery boilers. Final report, Phase 1, Volume 1: Executive summary  

SciTech Connect (OSTI)

This project is a multiple-phase effort to develop technologies to improve high-solids black liquor firing in pulp mill recovery boilers. The objectives are to develop a preliminary design of a recovery furnace simulator; evaluate the economics of high-solids; and delineate a project concept for evaluating candidate technologies to improve chemical recovery.

Southards, W.T.; Clement, J.L.; McIlroy, R.A.; Tharp, M.R.; Verrill, C.L.; Wessell, R.A.

1995-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Biohazardous Waste Disposal Guidelines Sharps Waste Solid Lab Waste Liquid Waste Animals Pathological Waste  

E-Print Network [OSTI]

Biohazardous Waste Disposal Guidelines Sharps Waste Solid Lab Waste Liquid Waste Animals Pathological Waste Description Biohazard symbol Address: UCSD 9500 Gilman Drive La Jolla, CA 92093 (858) 534) and identity of liquid waste Biohazard symbol Address: UCSD 9500 Gilman Drive La Jolla, CA 92093 (858) 534

Tsien, Roger Y.

342

Integrated Datasets (IDs) Wood/Bretherton proposal  

E-Print Network [OSTI]

Integrated Datasets (IDs) Wood/Bretherton proposal ID Rationale Space/Time scale; Location; Platforms Parameters Combined Drizzle Dataset (CD ID) Collocated precipitation, aerosol and cloud micro, precip. rate, cloud Cross- Section Dataset (XS-ID) Data on E-W cross- section along 20°S from coast

Wood, Robert

343

CORRUPTION AND ILLEGAL LOGGING IN THE WOOD  

E-Print Network [OSTI]

CORRUPTION AND ILLEGAL LOGGING IN THE WOOD PRODUCTS MARKET: the Italian experience in controlling Science 7 May 2004 Paper organization 1. State of the problem 2. Are Italian companies involved in deforestation and trade of illegal logging? 3. Which are the most affected countries? 4. Why do we need

Pettenella, Davide

344

PASSION FOR WOOD THE DLH GROUP 2006  

E-Print Network [OSTI]

countries on 5 continents · 19 timber merchant companies in Denmark, 10 of which have do-it-yourself stores Division consists of 19 timber merchant companies in Denmark, just over half of which have an adjacent doPASSION FOR WOOD THE DLH GROUP 2006 #12;54% 21% 25% ONE OF THE WORLD'S MAJOR TIMBER WHOLESALERS

345

Wood anomalies in resonant photonic quasicrystals  

E-Print Network [OSTI]

A theory of light diffraction from planar quasicrystalline lattice with resonant scatterers is presented. Rich structure, absent in the periodic case, is found in specular reflection spectra, and interpreted as a specific kind of Wood anomalies, characteristic for quasicrystals. The theory is applied to semiconductor quantum dots arranged in Penrose tiling.

Poddubny, A N

2010-01-01T23:59:59.000Z

346

Milnor-Wood inequalities for products  

E-Print Network [OSTI]

We prove Milnor-Wood inequalities for local products of manifolds. As a consequence, we establish the generalized Chern Conjecture for products $M\\times \\Sigma^k$ for any product of a manifold $M$ with a product of $k$ copies of a surface $\\Sigma$ for $k$ sufficiently large.

Bucher, Michelle

2012-01-01T23:59:59.000Z

347

Harvested Wood Products -an Incentive for Deforestation?  

E-Print Network [OSTI]

1 Harvested Wood Products - an Incentive for Deforestation? Andreas Fischlin1 Abstract Mitigation for deforestation is real. To curb the disadvantages of HWP, some debiting of non-sustainable forest management activities are implemented that provide true disincentives to deforestation, HWP may continue to create some

Fischlin, Andreas

348

Fast Curing of Composite Wood Products  

SciTech Connect (OSTI)

The overall objective of this program is to develop low temperature curing technologies for UF and PF resins. This will be accomplished by: Identifying the rate limiting UF and PF curing reactions for current market resins; Developing new catalysts to accelerate curing reactions at reduced press temperatures and times. In summary, these new curing technologies will improve the strength properties of the composite wood products and minimize the detrimental effects of wood extractives on the final product while significantly reducing energy costs for wood composites. This study is related to the accelerated curing of resins for wood composites such as medium density fiberboard (MDF), particle board (PB) and oriented strandboard (OSB). The latter is frequently manufactured with a phenol-formaldehyde resin whereas ureaformaldehyde (UF) resins are usually used in for the former two grades of composite wood products. One of the reasons that hinder wider use of these resins in the manufacturing of wood composites is the slow curing speed as well as inferior bondability of UF resin. The fast curing of UP and PF resins has been identified as an attractive process development that would allow wood to be bonded at higher moisture contents and at lower press temperatures that currently employed. Several differing additives have been developed to enhance cure rates of PF resins including the use of organic esters, lactones and organic carbonates. A model compound study by Conner, Lorenz and Hirth (2002) employed 2- and 4-hydroxymethylphenol with organic esters to examine the chemical basis for the reported enhanced reactivity. Their studies suggested that the enhance curing in the presence of esters could be due to enhanced quinone methide formation or enhanced intermolecular SN2 reactions. In either case the esters do not function as true catalysts as they are consumed in the reaction and were not found to be incorporated in the polymerized resin product. An alternative approach to accelerated PF curing can be accomplished with the addition amines or amides. The later functionality undergoes base catalyzed hydrolysis yielding the corresponding carboxyl ate and free amine which rapidly reacts with the phenolic methylol groups facilitating polymerization and curing of the PF resin (Pizzi, 1997).

Dr. Arthur J. Ragauskas

2006-04-26T23:59:59.000Z

349

Black Liquor Combustion Validated Recovery Boiler Modeling, Final Year Report, Volume 3: Appendix II, Sections 2 & 3 and Appendix III  

SciTech Connect (OSTI)

This project was initiated in October 1990 with the objective of developing and validating a new computer model of a recovery boiler furnace using a computational fluid dynamics (CFD) code specifically tailored to the requirements for solving recovery boiler flows, and using improved submodels for black liquor combustion based on continued laboratory fundamental studies. Many of these objectives were accomplished at the end of the first five years and documented in a comprehensive report on that work (DOE/CE/40936-T3, 1996). A critical review of recovery boiler modeling, carried out in 1995, concluded that further enhancements of the model were needed to make reliable predictions of key output variables. In addition, there was a need for sufficient understanding of fouling and plugging processes to allow model outputs to be interpreted in terms of the effect on plugging and fouling. As a result, the project was restructured and reinitiated at the end of October 1995, and was completed in June 1997. The entire project is now complete and this report summarizes all of the work done on the project since it was restructured. The key tasks to be accomplished under the restructured project were to (1) Complete the development of enhanced furnace models that have the capability to accurately predict carryover, emissions behavior, dust concentrations, gas temperatures, and wall heat fluxes; (2) Validate the enhanced furnace models, so that users can have confidence in the results; (3) Obtain fundamental information on aerosol formation, deposition, and hardening so as to develop the knowledge base needed to relate furnace model outputs to plugging and fouling in the convective sections of the boiler; and (4) Facilitate the transfer of codes, black liquor submodels, and fundamental knowledge to the U.S. kraft pulp industry.

T.M. Grace, W.J. Frederick, M. Salcudean, R.A. Wessel

1998-08-01T23:59:59.000Z

350

Hazardous Waste Program (Alabama)  

Broader source: Energy.gov [DOE]

This rule states criteria for identifying the characteristics of hazardous waste and for listing hazardous waste, lists of hazardous wastes, standards for the management of hazardous waste and...

351

Bioelectrochemical Integration of Waste Heat Recovery, Waste...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

MHRC System Concept ADVANCED MANUFACTURING OFFICE Bioelectrochemical Integration of Waste Heat Recovery, Waste-to-Energy Conversion, and Waste-to-Chemical Conversion with...

352

Highly Energy Efficient Directed Green Liquor Utilization (D-GLU) Pulping |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensional Subject:Ground HawaiiWaste Heat Recovery:|Department of

353

Calorific and porosity development in carbonized wood  

SciTech Connect (OSTI)

Wood of four species (red oak, southern yellow pine, black cherry, and hybrid poplar) were carbonized in a flowing nitrogen atmosphere at an average heating rate of 3 degrees Centigrade/minute to selected final temperatures up to 700 degrees Centigrade. The effects of final carbonization temperature on selected properties of the char were obtained using an adiabatic oxygen bomb calorimeter to investigate heat of combustion and a mercury porosimeter to investigate total porosity, real density, apparent density, and pore size distribution. Pore characteristics of carbonized wood developed before 300 degrees Centigrade in southern yellow pine and before 400 degrees Centigrade in red oak, black cherry, and hybrid poplar. Statistical analysis established linear relationships between heat of combustion versus final carbonization temperature in the carbonization temperature ranges investigated. The results of this study will aid in understanding optimum pryrolysis conditions for the development of calorific and porosity values. (Refs. 22).

Baileys, R.T.; Blankenhorn, P.R.

1982-07-01T23:59:59.000Z

354

MUSHROOM WASTE MANAGEMENT PROJECT LIQUID WASTE MANAGEMENT  

E-Print Network [OSTI]

of solid and liquid wastes generated at mushroom producing facilities. Environmental guidelines#12;MUSHROOM WASTE MANAGEMENT PROJECT LIQUID WASTE MANAGEMENT PHASE I: AUDIT OF CURRENT PRACTICE The Mushroom Waste Management Project (MWMP) was initiated by Environment Canada, the BC Ministry

355

Generation, Use, Disposal, and Management Options for CCA-Treated Wood  

E-Print Network [OSTI]

Generation, Use, Disposal, and Management Options for CCA-Treated Wood May 1998 Helena Solo, INVENTORY OF CCA-TREATED WOOD IN FLORIDA II.1 Characteristics of the Florida Wood Treatment Industry in 1996 10 II.2 Generation and Disposal of Cca-treated Wood 14 II.3 Disposal Reservoirs for Cca-treated Wood

Florida, University of

356

Wood elastic characterization from a single sample by resonant ultrasound spectroscopy  

E-Print Network [OSTI]

Wood elastic characterization from a single sample by resonant ultrasound spectroscopy R. Longoa materials such as wood using only one sample. To do so, two complementary methods are used. First, the wood: Resonant ultrasound spectroscopy, spherical and cubic samples, wood, elastic constants 1. Introduction Wood

Paris-Sud XI, Université de

357

Society of Wood Science and Technology State-of-the-Art Review  

E-Print Network [OSTI]

Society of Wood Science and Technology State-of-the-Art Review CHEMICAL COUPLING IN WOOD FIBER. In this paper, we review coupling agents, pretreatment, and mixing technology for wood fiber and polymer and adhesion Wood ond trhc,r S c r r ~ ~ Society of Wood Sclencc

358

NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy operated by the Alliance for Sustainable Energy, LLC Waste-to-Energy Technologies  

E-Print Network [OSTI]

NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency in South Korea, fueled by industrial waste (mainly fabric, wood, plastic, packaging materials

359

Detection of estrogen- and dioxin-like activity in pulp and paper mill black liquor and effluent using in vitro bioassays  

SciTech Connect (OSTI)

Pulp and paper mill effluent contains a complex mixture of compounds which adversely affect fish physiologically and at the population level. These effects include compromised reproductive fitness and the induction of mixed-function oxidase activities; two classic responses mediated by the estrogen and/or Ah receptor. In vitro recombinant receptor/reporter gene assays were used to examine pulp and paper mill black liquor and effluent for estrogenic, dioxin-like and antiestrogenic activities. Using MCF7 cells transiently transfected with a Gal4-estrogen receptor chimeric construct (Gal4-HEGO) and a Gal4-regulated luciferase reporter gene (17m5-G-Luc), it was estimated that black liquor contains 4 {+-} 2 ppb ``estrogen equivalents``, while negligible estrogenic activity was observed in a methanol-extracted pulp and paper mill effluent fraction (MF). A dioxin response element (DRE)-regulated luciferase reporter gene (pGudLucl.1) transiently transfected into Hepalclc7 wild type cells exhibited a dose-dependent increase in luciferase activity following treatment with 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDO), black liquor and MF. Based on the dose response curves, black liquor and MF contain 10 {+-} 4 ppb and 20 {+-} 6 ppt ``TCDD equivalents``, respectively. Moreover, MF exhibited significant AhR-mediated antiestrogenic activity. These results demonstrate the utility of these bioassays and suggest that the effects observed in fish exposed to pulp and paper mill effluent may be due to unidentified ER and AhR ligands not detected by conventional chemical analysis due to the lack of appropriate chemical standards.

Zacharewski, T.; Berhane, K.; Gillesby, B.; Burnison, K. [Univ. of Western Ontario, London, Ontario (Canada). Dept. of Pharmacology and Toxicology; [National Water Research Inst., Burlington, Ontario (Canada). Aquatic Ecosystem Conservation Branch

1995-12-31T23:59:59.000Z

360

arsenate cca wood: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in Renewable Energy Websites Summary: of primary energy in Estonia Wood fuels production Pellet firing projects in Estonia - SIDA Demo East firing projects in...

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

FIEA Advancing Wood Technology Forest Industry Engineering Scholarship  

E-Print Network [OSTI]

year. Forestry and wood products companies, key product suppliers, researchers and technology qualification. This FIEA Scholarship has also been set up to encourage and support an outstanding student

Hickman, Mark

362

Microsoft Word - CX-Murray-CusterWoodPoles_WEB.doc  

Broader source: Energy.gov (indexed) [DOE]

Covington SUBJECT: Environmental Clearance Memorandum Steve Scott Line Foreman III - TFNF-Snohomish Proposed Action: Wood pole replacement at selected locations along the...

363

Development of an alternative kraft black liquor recovery process based on low-temperature processing in fluidized beds. Final technical report on Annex 9, Task 1  

SciTech Connect (OSTI)

The overall objective of this research program was to provide the fundamental knowledge and experimental data from pilot scale operation for an alternative black liquor recovery technology which would have a higher overall energy efficiency, would not suffer from the smelt-water explosion hazard and would be lower in capital cost. In addition, the alternative process would be more flexible and well suited for incremental recovery capacity or for new pulping processes, such as the new sulfide-sulfide-AQ process. The research program consists of number of specific research objectives with the aim to achieve the ultimate objective of developing an alternative recovery process which is shown in Figure 1. The specific objectives are linked to individual unit operations and they represent the following research topics: (1) superheated steam drying of kraft black liquors; (2) fast pyrolysis of black liquor; (3) hydrogen sulfide absorption from flue gas; (4) reduction of sodium sulfate in solid phase with gaseous hydrogen; and (5) verification of the fundamental results in fluidized bed pilot plant. The accomplishments in each of these objectives are described.

Kubes, G.J.

1994-03-24T23:59:59.000Z

364

Black liquor combustion validated recovery boiler modeling: Final year report. Volume 1 (Main text and Appendix I, sections 1--4)  

SciTech Connect (OSTI)

This project was initiated in October 1990, with the objective of developing and validating a new computer model of a recovery boiler furnace using a computational fluid dynamics (CFD) code specifically tailored to the requirements for solving recovery boiler flows, and using improved submodels for black liquor combustion based on continued laboratory fundamental studies. The key tasks to be accomplished were as follows: (1) Complete the development of enhanced furnace models that have the capability to accurately predict carryover, emissions behavior, dust concentrations, gas temperatures, and wall heat fluxes. (2) Validate the enhanced furnace models, so that users can have confidence in the predicted results. (3) Obtain fundamental information on aerosol formation, deposition, and hardening so as to develop the knowledge base needed to relate furnace model outputs to plugging and fouling in the convective sections of the boiler. (4) Facilitate the transfer of codes, black liquid submodels, and fundamental knowledge to the US kraft pulp industry. Volume 1 contains the main body of the report and the first 4 sections of Appendix 1: Modeling of black liquor recovery boilers -- summary report; Flow and heat transfer modeling in the upper furnace of a kraft recovery boiler; Numerical simulation of black liquor combustion; and Investigation of turbulence models and prediction of swirling flows for kraft recovery furnaces.

Grace, T.M.; Frederick, W.J.; Salcudean, M.; Wessel, R.A.

1998-08-01T23:59:59.000Z

365

Stacy Wood's Personal Biography Dr. Wood's research focuses on how consumers respond and adapt to change or innovation. This applies both to  

E-Print Network [OSTI]

Stacy Wood's Personal Biography Dr. Wood's research focuses on how consumers respond and adapt, Journal of Marketing, Journal of Consumer Psychology, and Journal of Retailing. Dr. Wood joined the NC Undergraduate Teaching Award, the University of South Carolina's top undergraduate teaching honor. Dr. Wood

Reif, John H.

366

Wood Pulp Digetster Wall Corrosion Investigation  

SciTech Connect (OSTI)

The modeling of the flow in a wood pulp digester is but one component of the investigation of the corrosion of digesters. This report describes the development of a Near-Wall-Model (NWM) that is intended to couple with a CFD model that determines the flow, heat, and chemical species transport and reaction within the bulk flow of a digester. Lubrication theory approximations were chosen from which to develop a model that could determine the flow conditions within a thin layer near the vessel wall using information from the interior conditions provided by a CFD calculation of the complete digester. The other conditions will be determined by coupled solutions of the wood chip, heat, and chemical species transport and chemical reactions. The NWM was to couple with a digester performance code in an iterative fashion to provide more detailed information about the conditions within the NW region. Process Simulations, Ltd (PSL) is developing the digester performance code. This more detailed (and perhaps more accurate) information from the NWM was to provide an estimate of the conditions that could aggravate the corrosion at the wall. It is intended that this combined tool (NWM-PSL) could be used to understand conditions at/near the wall in order to develop methods to reduce the corrosion. However, development and testing of the NWM flow model took longer than anticipated and the other developments (energy and species transport, chemical reactions and linking with the PSL code) were not completed. The development and testing of the NWM are described in this report. In addition, the investigation of the potential effects of a clear layer (layer reduced in concentration of wood chips) near the wall is reported in Appendix D. The existence of a clear layer was found to enhance the flow near the wall.

Giles, GE

2003-09-18T23:59:59.000Z

367

Life in the woods : production and consumption of the urban forest  

E-Print Network [OSTI]

The use of wood is fraught with paradox. Wood as a building material is embraced for its naturalness, while the cutting of trees is indicted as a destruction of nature. Wood is lauded for its structural properties and ...

Volicer, Nadine (Nadine M.)

2012-01-01T23:59:59.000Z

368

The use of a permanent magnet for water content measurements of wood chips  

E-Print Network [OSTI]

Diagram of a Wood Chip Moisture Content Measurement DeviceMeasurement of Moisture Content in Wood Chips Using NMR andWood chip water-content tests were done over a broad range of moisture contents

2001-01-01T23:59:59.000Z

369

Calorimetric analysis of fungal degraded wood  

SciTech Connect (OSTI)

Endothermic transition and gross heat of combustion of aspenwood subjected to degradation by Lenzites trabea and Polyporus versicolor were determined by using differential scanning calorimetry (DSC) and an adiabatic O bomb. Endothermic peak areas of undegraded and fungi-degraded wood differed from each other at all levels of weight loss. The regression analysis of the DSC data vs. weight loss revealed a significant relations, although not highly correlated, for P. versicolor-degraded specimens and a nonsignificant relation for L. trabea-degraded specimens; weight loss and gross heat of combustion values of degraded specimens were significantly correlated.

Blankenhorn, P.R.; Baldwin, R.C.; Merrill, W. Jr.; Ottone, S.P.

1980-01-01T23:59:59.000Z

370

Rachel Woods-Robinson | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power Systems Engineering Research and DevelopmentDepartmentinBatteryRachel Woods-Robinson About

371

Beverly Woods | Y-12 National Security Complex  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAboutScienceCareers Apply for a JobBernardthe AlcatorBeverly Woods Beverly

372

Black liquor combustion validated recovery boiler modeling: Final year report. Volume 3 (Appendices II, sections 2--3 and III)  

SciTech Connect (OSTI)

This project was initiated in October 1990, with the objective of developing and validating a new computer model of a recovery boiler furnace using a computational fluid dynamics (CFD) code specifically tailored to the requirements for solving recovery boiler flows, and using improved submodels for black liquor combustion based on continued laboratory fundamental studies. The key tasks to be accomplished were as follows: (1) Complete the development of enhanced furnace models that have the capability to accurately predict carryover, emissions behavior, dust concentrations, gas temperatures, and wall heat fluxes. (2) Validate the enhanced furnace models, so that users can have confidence in the predicted results. (3) Obtain fundamental information on aerosol formation, deposition, and hardening so as to develop the knowledge base needed to relate furnace model outputs to plugging and fouling in the convective sections of the boiler. (4) Facilitate the transfer of codes, black liquid submodels, and fundamental knowledge to the US kraft pulp industry. Volume 3 contains the following appendix sections: Formation and destruction of nitrogen oxides in recovery boilers; Sintering and densification of recovery boiler deposits laboratory data and a rate model; and Experimental data on rates of particulate formation during char bed burning.

Grace, T.M.; Frederick, W.J.; Salcudean, M.; Wessel, R.A.

1998-08-01T23:59:59.000Z

373

Wasted Wind  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

why turbulent airflows are causing power losses and turbine failures in America's wind farms-and what to do about it April 1, 2014 Wasted Wind This aerial photo of Denmark's Horns...

374

Reducing the solid waste stream: reuse and recycling at Lawrence Livermore National Laboratory  

SciTech Connect (OSTI)

In Fiscal Year (FY) 1996 Lawrence Livermore National Laboratory (LLNL) increased its solid waste diversion by 365 percent over FY 1992 in five solid waste categories - paper, cardboard, wood, metals, and miscellaneous. (LLNL`s fiscal year is from October 1 to September 30.) LLNL reused/ recycled 6,387 tons of waste, including 340 tons of paper, 455 tons of scrap wood, 1,509 tons of metals, and 3,830 tons of asphalt and concrete (Table1). An additional 63 tons was diverted from landfills by donating excess food, selling toner cartridges for reconditioning, using rechargeable batteries, redirecting surplus equipment to other government agencies and schools, and comporting plant clippings. LLNL also successfully expanded its demonstration program to recycle and reuse construction and demolition debris as part of its facility-wide, comprehensive solid waste reduction programs.

Wilson, K. L.

1997-08-01T23:59:59.000Z

375

How Wood Chip Size Affects Pretreatment Effectiveness of Woody Biomass for Biological Processing  

E-Print Network [OSTI]

of wood: effect of chip size, acid, moisture content andis the wood chip width, M is the moisture content (%), G is

Tam, Jerry

2013-01-01T23:59:59.000Z

376

Relative Leaching and Aquatic Toxicity of Pressure-Treated Wood  

E-Print Network [OSTI]

Relative Leaching and Aquatic Toxicity of Pressure-Treated Wood Products Using Batch Leaching Tests treated with one of five different waterborne chemical preservatives, were leached using 18-h batch- treated wood at concentrations above the U.S. federal toxicity characteristic limit (5 mg/L). All

Florida, University of

377

A Chemical Stain for Identifying Arsenic-Treated Wood  

E-Print Network [OSTI]

A Chemical Stain for Identifying Arsenic-Treated Wood (FINAL) Submitted June 23, 2006 Amy Omae.2 Motivation 4 I.3 Objectives 5 CHAPTER II, DEVELOPMENT OF A CHEMICAL STAIN FOR IDENTIFYING ARSENIC-TREATED Applications 22 II.5 Resulting Stain to Identify Arsenic-Treated Wood and Methods of Testing 25 CHAPTER III

Florida, University of

378

Trends and Market Effects of Wood Energy Policies  

E-Print Network [OSTI]

Trends and Market Effects of Wood Energy Policies Bengt Hillring SLU SWEDEN http://www.unece.org/trade for energy is expected to increase · Trade of wood products is also expected to increase · COMPETITION is the main international energy source · Climate change ­ Energy production ­ CO2 · European Union different

379

SECO - Dow Corning's Wood Fueled Industrial Cogeneration Project  

E-Print Network [OSTI]

In 1979, Dow Corning Corporation decided to build a wood fueled steam and electric cogeneration (SECO) power plant at Midland, Michigan. This decision was prompted by the high cost of oil and natural gas, an abundant supply of wood in mid Michigan...

Betts, W. D.

1982-01-01T23:59:59.000Z

380

Fibre Based Modeling of Wood Dynamics and Fracture  

E-Print Network [OSTI]

Fibre Based Modeling of Wood Dynamics and Fracture by Sean Meiji Sutherland B.Sc., The University for the simulation of the dynamics and fracturing char- acteristics of wood, specifically its anisotropic behaviour bundles of fibres. Additionally, we describe the conditions under which fracture occurs in the material

Bridson, Robert

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Through-thickness ultrasonic characterization of wood and  

E-Print Network [OSTI]

in the form of bark, wood chips, sawdust, cotton gin trash, rice hulls, and sugar ba- gasse (Kleit et al. 1994. It was found that the equilibrium moisture content (EMC) was positively related to particulate sizeThrough-thickness ultrasonic characterization of wood and agricultural fiber composites Ronnie Y

382

Wood, energy and households: Perspectives on rural Kenya  

SciTech Connect (OSTI)

This book presents papers on the use of wood fuels in Kenya. Topics considered include domestic energy consumption, historical aspects, the Kenyan economy, ecology, supply and demand, forests, aspects of energy consumption in a pastoral ecosystem, estimation of present and future demand for wood fuels, and energy source development.

Barnes, C.; Ensminger, J.; O'Keefe, P.

1984-01-01T23:59:59.000Z

383

Briquette comprising caking coal and municipal solid waste  

SciTech Connect (OSTI)

Briquettes of specified geometry and composition are produced to serve as feed material or ''burden'' in a moving-burden gasifier for the production of a synthesis or fuel gas from organic solid waste materials and coal, including especially, the so-called ''caking'' coals, as in the process of copending application number 675,918. The briquettes are formed from a well-blended mixture of shredded organic solid wastes, including especially, municipal solid waste (Msw) or biomass, and crushed caking coal, including coal fines. A binder material may or may not be required, depending on the coal/msw ratio and the compaction pressure employed. The briquettes may be extruded, stamped, or pressed, employing compaction pressures in excess of 1000 psi, and preferably in the range of 2000 to 10,000 psi. The briquettes may be circular, polygonal, or irregular in cross-section; they may be solid, or concentrically perforated to form a hollow cylinder or polygon; they may be formed into saddles, pillows or doughnuts. The ratio of caking coal to shredded municipal solid waste is controlled so that each part of the predominantly cellulosic organic solid waste will be blended with 0.5 to 3.0 parts of crushed coal. Suitable binder materials include dewatered sewage slude (Dss), ''black liquor'' rich in lignin derivatives, black strap molasses, waste oil, and starch. The binder concentration is preferably in the range of 2 to 6 percent. If coals high in sulfur content are to be processed, at least a stoichiometric equivalent of dolomite may be included in the briquette formulation to eliminate a major fraction of the sulfur with the slag.

Schulz, H.W.

1980-09-30T23:59:59.000Z

384

Biomass plants face wood supply risks Report warns giant new biomass power plants will be hugely reliant on wood chip  

E-Print Network [OSTI]

Biomass plants face wood supply risks Report warns giant new biomass power plants will be hugely's biomass energy sector could be undermined unless businesses move to resolve the supply chain issues-scale biomass plants will leave generators largely reliant on biomass from overseas such as wood chips, elephant

385

Multipass comminution process to produce precision wood particles of uniform size and shape with disrupted grain structure from wood chips  

DOE Patents [OSTI]

A process of comminution of wood chips (C) having a grain direction to produce a mixture of wood particles (P), wherein the wood chips are characterized by an average length dimension (L.sub.C) as measured substantially parallel to the grain, an average width dimension (W.sub.C) as measured normal to L.sub.C and aligned cross grain, and an average height dimension (H.sub.C) as measured normal to W.sub.C and L.sub.C, and wherein the comminution process comprises the step of feeding the wood chips in a direction of travel substantially randomly to the grain direction one or more times through a counter rotating pair of intermeshing arrays of cutting discs (D) arrayed axially perpendicular to the direction of wood chip travel.

Dooley, James H; Lanning, David N

2014-05-27T23:59:59.000Z

386

Implementing Strategies for Drying and Pressing Wood Without Emissions Controls  

SciTech Connect (OSTI)

Drying and pressing wood for the manufacture of lumber, particleboard, oriented strand board (OSB), veneer and medium density fiberboard (MDF) release volatile organic compounds (VOCs) into the atmosphere. These emissions require control equipment that are capital-intensive and consume significant quantities of natural gas and electricity. The objective of our work was to understand the mechanisms through which volatile organic compounds are generated and released and to develop simple control strategies. Of the several strategies developed, two have been implemented for OSB manufacture over the course of this study. First, it was found that increasing final wood moisture by about 2-4 percentage points reduced the dryer emissions of hazardous air pollutants by over 70%. As wood dries, the escaping water evaporatively cools the wood. This cooling tapers off wood when the wood is nearly dry and the wood temperature rises. Thermal breakdown of the wood tissue occurs and VOCs are released. Raising the final wood moisture by only a few percentage points minimizes the temperature rise and reduces emissions. Evaporative cooling also impacts has implications for VOC release from wood fines. Flaking wood for OSB manufacture inevitable generates fines. Fines dry out rapidly because of their high surface area and evaporative cooling is lost more rapidly than for flakes. As a result, fines emit a disproportionate quantity of VOCs. Fines can be reduced in two ways: through screening of the green furnish and through reducing their generation during flaking. The second approach is preferable because it also increased wood yield. A procedure to do this by matching the sharpness angle of the flaker knife to the ambient temperature was also developed. Other findings of practical interests are as follows: Dielectric heating of wood under low-headspace conditions removes terpenes and other extractives from softwood; The monoterpene content in trees depend upon temperature and seasonal effects; Method 25A emissions from lumber drying can be modeled from a knowledge of the airflow through the kiln; A heat transfer model shows that VOCs released during hot-pressing mainly originate from the surface of the board; and Boiler ash can be used to adsorb formaldehyde from air streams.

Sujit Banerjee; Terrance Conners

2007-09-07T23:59:59.000Z

387

Waste processing air cleaning  

SciTech Connect (OSTI)

Waste processing and preparing waste to support waste processing relies heavily on ventilation. Ventilation is used at the Hanford Site on the waste storage tanks to provide confinement, cooling, and removal of flammable gases.

Kriskovich, J.R.

1998-07-27T23:59:59.000Z

388

Materials for the pulp and paper industry. Section 1: Development of materials for black liquor recovery boilers  

SciTech Connect (OSTI)

Black liquor recovery boilers are essential components of kraft pulp and paper mills because they are a critical element of the system used to recover the pulping chemicals required in the kraft pulping process. In addition, the steam produced in these boilers is used to generate a significant portion of the electrical power used in the mill. Recovery boilers require the largest capital investment of any individual component of a paper mill, and these boilers are a major source of material problems in a mill. The walls and floors of these boilers are constructed of tube panels that circulate high pressure water. Molten salts (smelt) accumulate on the floor of recovery boilers, and leakage of water into the boiler can result in a violent explosion when the leaked water instantly vaporizes upon contacting the molten smelt. Because corrosion of the conventionally-used carbon steel tubing was found to be excessive in the lower section of recovery boilers, use of stainless steel/carbon steel co-extruded tubing was adopted for boiler walls to lessen corrosion and reduce the likelihood of smelt/water explosions. Eventually, this co-extruded or composite (as it is known in the industry) tubing was selected for use as a portion or all of the floor of recovery boilers, particularly those operating at pressures > 6.2 MPa (900 psi), because of the corrosion problems encountered in carbon steel floor tubes. Since neither the cause of the cracking nor an effective solution has been identified, this program was established to develop a thorough understanding of the degradation that occurs in the composite tubing used for walls and floors. This is being accomplished through a program that includes collection and review of technical reports, examination of unexposed and cracked tubes from boiler floors, computer modeling to predict residual stresses under operating conditions, and operation of laboratory tests to study corrosion, stress corrosion cracking, and thermal fatigue.

Keiser, J.R.; Hubbard, C.R.; Payzant, E.A. [Oak Ridge National Lab., TN (United States)] [and others

1997-04-01T23:59:59.000Z

389

Waste Disposal (Illinois)  

Broader source: Energy.gov [DOE]

This article lays an outline of waste disposal regulations, permits and fees, hazardous waste management and underground storage tank requirements.

390

Municipal solid waste combustion: Fuel testing and characterization  

SciTech Connect (OSTI)

The objective of this study is to screen and characterize potential biomass fuels from waste streams. This will be accomplished by determining the types of pollutants produced while burning selected municipal waste, i.e., commercial mixed waste paper residential (curbside) mixed waste paper, and refuse derived fuel. These materials will be fired alone and in combination with wood, equal parts by weight. The data from these experiments could be utilized to size pollution control equipment required to meet emission standards. This document provides detailed descriptions of the testing methods and evaluation procedures used in the combustion testing and characterization project. The fuel samples will be examined thoroughly from the raw form to the exhaust emissions produced during the combustion test of a densified sample.

Bushnell, D.J.; Canova, J.H.; Dadkhah-Nikoo, A.

1990-10-01T23:59:59.000Z

391

Wood smoke inhalation increases pulmonary microvascular permeability  

SciTech Connect (OSTI)

The effect of wood smoke inhalation (SI) on pulmonary vascular permeability was studied in open-chested, anesthetized dogs. Animals were divided into two groups. A prenodal lymphatic vessel was cannulated in group I (n = 7), and baseline (BL) lung lymph flow (QL) and lymph (CL) and plasma (CP) protein concentrations were measured. The animals' lungs were then ventilated with wood smoke for 5 minutes. Left atrial pressure (Pla) was increased above baseline (mean 16.7 +/- 2.2 mm Hg), and the ratio of CL to CP was used to assess endothelial permeability at high lymph flows. There was little change in either QL (BL: 27 +/- 9; SI: 27 +/- 5 microliters/min) or CL/CP (BL: 0.76 +/- 0.03; SI: 0.74 +/- 0.02) after SI at normal Pla. Elevation of Pla caused a significant increase in QL (136 +/- 15 microliters/min), but CL/CP (0.67 +/- 0.02) failed to decrease significantly at high lymph flows. In group II (n = 15) total protein concentration of airway fluid was compared with that of plasma after smoke inhalation, intravenous alloxan, and increased Pla. The ratio of protein concentration in airway fluid to plasma after SI (0.70 +/- 0.07) was greater than that obtained with increased Pla (0.64 +/- 0.07) but less than that after alloxan (0.85 +/- 0.04). These data indicate that SI in the dog results in a moderate increase in pulmonary vascular permeability that is less severe than that induced by alloxan.

Nieman, G.F.; Clark, W.R. Jr.; Goyette, D.; Hart, A.K.; Bredenberg, C.E.

1989-04-01T23:59:59.000Z

392

An economical and market analysis of Canadian wood pellets.  

SciTech Connect (OSTI)

This study systematically examined the current and future wood pellet market, estimated the cost of Canadian torrefied pellets, and compared the torrefied pellets with the conventional pellets based on literature and industrial data. The results showed that the wood pellet industry has been gaining significant momentum due to the European bioenergy incentives and the rising oil and natural gas prices. With the new bioenergy incentives in USA, the future pellets market may shift to North America, and Canada can potentially become the largest pellet production centre, supported by the abundant wood residues and mountain pine beetle (MPB) infested trees.

Peng, J. [University of British Columbia, Vancouver

2010-08-01T23:59:59.000Z

393

Author's personal copy Evaluation of methods for sorting CCA-treated wood  

E-Print Network [OSTI]

Author's personal copy Evaluation of methods for sorting CCA-treated wood Gary Jacobi a , Helena contains treated wood including wood treated with chromated copper arsenate (CCA). Many recycling options of sorting methods for identifying treated wood. Sorting methods evaluated included visual sorting and visual

Florida, University of

394

Wood plastic composites based on microfibrillar blends of high density polyethylene/poly(ethylene terephthalate)  

E-Print Network [OSTI]

Wood plastic composites based on microfibrillar blends of high density polyethylene January 2010 Keywords: Wood plastic composites Poly(ethylene terephthalate) Polyethylene Extrusion a b into wood plastic composites through a two-step reactive extrusion technology. Wood flour was added into pre

395

short-wood and is also character-ized by large payloads and long  

E-Print Network [OSTI]

short-wood and is also character- ized by large payloads and long distances. However, due to our- mately 90% of wood arrives at mills by truck, with 10% arriving through a combination of water and rail. Of the roundwood deliv- ery, approximately 93% is in long- wood form, with the small remain- der being short-wood

Bolding, M. Chad

396

Jmtland County Energy Agency Comfortable use of wood pellets in one-family houses in  

E-Print Network [OSTI]

Jämtland County Energy Agency Sweden 1 Comfortable use of wood pellets in one-family houses-operation with the Swedish Energy Agency, carried through the project "Comfortable use of wood pellets in one-family houses of one-family houses to start using wood pellets and an increase of the use of wood pellets in one

397

Copyright (to be inserted by Humphrey) Thermal and Dynamic-mechanical Properties of Wood-PVC  

E-Print Network [OSTI]

Citation & Copyright (to be inserted by Humphrey) Thermal and Dynamic-mechanical Properties of Wood-PVC properties, maleation, thermal analysis, wood veneer, wood-PVC composites ABSTRACT The influence of maleation on thermal and dynamic-mechanical properties of wood-PVC composites was investigated in this study

398

PROPERTIES OF HDPE/CLAY/WOOD NANOCOMPOSITES , C. M. Clemons 2  

E-Print Network [OSTI]

from wood, kenaf, flax, hemp, cotton, Kraft pulp, coconut husk, areca fruit, pineapple leaf, oil palm

399

Dynamics of wood recruitment in streams of the northeastern US Dana R. Warren a,  

E-Print Network [OSTI]

: Large woody debris LWD Riparian forest Wood recruitment Wood dynamics Stream restoration Debris dam restoration efforts often incorporate large wood. In most cases, however, stream restoration projectsDynamics of wood recruitment in streams of the northeastern US Dana R. Warren a, *, Clifford E

Kraft, Clifford E.

400

Ethanol production using corn, switchgrass, and wood; Biodiesel production using soybean and  

E-Print Network [OSTI]

production using wood biomass required 57 % more fossil energy than the ethanol fuel produced. Biodiesel

David Pimentel; Tad W. Patzek

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Engineering Study for a Full Scale Demonstration of Steam Reforming Black Liquor Gasification at Georgia-Pacific's Mill in Big Island, Virginia  

SciTech Connect (OSTI)

Georgia-Pacific Corporation performed an engineering study to determine the feasibility of installing a full-scale demonstration project of steam reforming black liquor chemical recovery at Georgia-Pacific's mill in Big Island, Virginia. The technology considered was the Pulse Enhanced Steam Reforming technology that was developed and patented by Manufacturing and Technology Conversion, International (MTCI) and is currently licensed to StoneChem, Inc., for use in North America. Pilot studies of steam reforming have been carried out on a 25-ton per day reformer at Inland Container's Ontario, California mill and on a 50-ton per day unit at Weyerhaeuser's New Bern, North Carolina mill.

Robert De Carrera; Mike Ohl

2002-03-19T23:59:59.000Z

402

Method for lowering the VOCS emitted during drying of wood products  

DOE Patents [OSTI]

The present invention is directed to a method for removal of VOCs from wood products prior to drying the wood products. The method of the invention includes the steps of providing a chamber having an opening for receiving wood and loading the chamber with green wood. The wood is loaded to an extent sufficient to provide a limited headspace in the chamber. The chamber is then closed and the wood is heated in the chamber for a time and at a temperature sufficient to saturate the headspace with moisture and to substantially transfer VOCs from the wood product to the moisture in the headspace.

Banerjee, Sujit (1832 Jacksons Creek Point, Marietta, GA 30068); Boerner, James Robert (154 Junedale Rd., Cincinnati, OH 45218); Su, Wei (2262 Orleans Ave., Marietta, GA 30062)

2000-01-01T23:59:59.000Z

403

WASTE TO WATTS Waste is a Resource!  

E-Print Network [OSTI]

to Climate protection in light of the· Waste Framework Directive. The "energy package", e.g. the RenewablesWASTE TO WATTS Waste is a Resource! energy forum Case Studies from Estonia, Switzerland, Germany Bossart,· ABB Waste-to-Energy Plants Edmund Fleck,· ESWET Marcel van Berlo,· Afval Energie Bedrijf From

Columbia University

404

The Honorable John T. 'Gregorio 301 N. Wood Avenue  

Office of Legacy Management (LM)

Wood Avenue Linden, 'New Jersey 07036 d. Dear Mayor Gregorio: ,' ,' .' , Secretary of Energy Hazel O'Leary has announced a new approach to openness, in the'llepartment' of...

405

STUDIA FORESTALIA SUECICA Wood resource dynamics in the  

E-Print Network [OSTI]

way or another. Wood Resource Dynamics (i.e. this volunze) describes the historical back- ground . . . . . . . . . . 3.2 Act one: Development determined by . . . . . . .free market forces 3.3 Act two: Government price

García, Oscar

406

Seismic rehabilitation of wood diaphragms in unreinforced masonary buildings  

E-Print Network [OSTI]

The purpose of this study is to evaluate the seismic performance of existing and rehabilitated wood floor and roof diaphragms in typical pre-1950's, unreinforced masonry (URM) buildings found in the Central and Eastern portions of the United States...

Grubbs, Amber Jo

2002-01-01T23:59:59.000Z

407

aspen wood chips: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

8 COMPARISON OF DIFFERENT APPROACHES FOR THE SIMULATION OF BOILERS USING OIL, GAS, PELLETS OR WOOD CHIPS CiteSeer Summary: A detailed model for the simulation of boilers using...

408

Wood Gasification: Where It's At, Where It's Going  

E-Print Network [OSTI]

This paper discusses the principles and practice of various designs of biomass/wood gasifiers. In general, the basic principle of gasification is reviewed. A look at existing gasifier schemes, including packed bed updraft, downdraft, and fluidized...

Murphy, M. L.

1981-01-01T23:59:59.000Z

409

Wood Products Marketing And Value-Added Opportunities  

E-Print Network [OSTI]

Wood Products Marketing And Value-Added Opportunities In Latin America: A Focus on Brazil Richard School of Renewable Natural Resources Louisiana State University Presented at: PANORAMA Curitiba, Brazil

410

Long-term lime pretreatment of poplar wood  

E-Print Network [OSTI]

Lignocellulosic biomass (e.g., poplar wood) provides a unique and sustainable resource for environmentally safe organic fuels and chemicals. The core of this study is the pretreatment step involved in bioconversion processes. Pretreatment...

Sierra Ramirez, Rocio

2006-04-12T23:59:59.000Z

411

RFPs Due for Statewide Wood Energy Cooperative Agreement  

Broader source: Energy.gov [DOE]

The U.S. Forest Service requests proposals for the 2014 Statewide Wood Energy Teams (SWET) Cooperative Agreement. The outcome anticipated under this funding mechanism will advance the United States...

412

RFPs Due for Hazardous Fuel Wood to Energy Grant  

Broader source: Energy.gov [DOE]

The U.S. Forest Service requests proposals for the 2014 Hazardous Fuel Wood to Energy (W2E) Grant. The outcome anticipated under this funding mechanism will advance the United States Department of...

413

High-solids black liquor firing in pulp and paper industry kraft recovery boilers: Phase 1 -- Final report. Volume 2: Project technical results  

SciTech Connect (OSTI)

This project is a multiple-phase effort to develop technologies to improve high-solids black liquor firing in pulp mill recovery boilers. The principal means to this end is to construct and operate a pilot-scale recovery furnace simulator (RFS) in which these technologies can be tested. The Phase 1 objectives are to prepare a preliminary design for the RFS, delineate a project concept for evaluating candidate technologies, establish industrial partners, and report the results. Phase 1 addressed the objectives with seven tasks: Develop a preliminary design of the RFS; estimate the detailed design and construction costs of the RFS and the balance of the project; identify interested parties in the paper industry and key suppliers; plan the Phase 2 and Phase 3 tests to characterize the RFS; evaluate the economic justification for high-solids firing deployment in the industry; evaluate high-solids black liquor property data to support the RFS design; manage the project and reporting results, which included planning the future program direction.

Southards, W.T.; Clement, J.L.; McIlroy, R.A.; Tharp, M.R.; Verrill, C.L.; Wessell, R.A.

1995-11-01T23:59:59.000Z

414

Hanford Site annual dangerous waste report: Volume 1, Part 1, Generator dangerous waste report, dangerous waste  

SciTech Connect (OSTI)

This report contains information on hazardous wastes at the Hanford Site. Information consists of shipment date, physical state, chemical nature, waste description, waste number, weight, and waste designation.

NONE

1994-12-31T23:59:59.000Z

415

Moisture Distribution and Flow During Drying of Wood and Fiber  

SciTech Connect (OSTI)

New understanding, theories, and techniques for moisture flow and distribution were developed in this research on wood and wood fiber. Improved understanding of the mechanisms of flake drying has been provided. Observations of flake drying and drying rate curves revealed that rate of moisture loss consisted of two falling rate periods and no constant rate drying period was observed. Convective heat transfer controls the first period, and bound water diffusion controls the second period. Influence of lower drying temperatures on bending properties of wood flakes was investigated. Drying temperature was found to have a significant influence on bending stiffness and strength. A worksheet for calculation of the energy required to dry a single strandboard flake was developed but has not been tested in an industrial setting yet. A more complete understanding of anisotropic transverse shrinkage of wood is proposed based on test results and statistical analysis. A simplified mod el of a wood cell's cross-section was drawn for calculating differential transverse shrinkage. The model utilizes cell wall thickness and microfibrillar packing density and orientation. In spite of some phenomena of cell wall structure not yet understood completely, the results might explain anisotropic transverse shrinkage to a major extent. Boundary layer theory was found useful for evaluating external moisture resistance during drying. Simulated moisture gradients were quire comparable to the actual gradients in dried wood. A mathematical procedure for determining diffusion and surface emission coefficients was also developed. Thermal conductivity models of wood derived from its anatomical structure were created and tested against experimental values. Model estimations provide insights into changes in heat transfer parameters during drying. Two new techniques for measuring moisture gradients created in wood during drying were developed. A new technique that utilizes optical properties of cobalt chloride was developed for nondestructive determination of surface moisture content. Fundamental new understanding of drying characteristics in wood and fiber has been provided that can be used by researchers to improve drying of wood and fiber. The three techniques for measuring moisture content and gradients provided in this study are efficient, practical, and economical - easy to apply by industry and researchers. An energy consumption worksheet is provided as a first step toward reducing energy consumed during drying of lumber and strandboard flakes. However, it will need additional verification and testing.

Zink-Sharp, Audrey; Hanna, Robert B.

2001-12-28T23:59:59.000Z

416

Central Waste Complex (CWC) Waste Analysis Plan  

SciTech Connect (OSTI)

The purpose of this waste analysis plan (WAP) is to document the waste acceptance process, sampling methodologies, analytical techniques, and overall processes that are undertaken for waste accepted for storage at the Central Waste Complex (CWC), which is located in the 200 West Area of the Hanford Facility, Richland, Washington. Because dangerous waste does not include the source, special nuclear, and by-product material components of mixed waste, radionuclides are not within the scope of this documentation. The information on radionuclides is provided only for general knowledge.

ELLEFSON, M.D.

1999-12-01T23:59:59.000Z

417

1 Copyright 2009 by ASME Proceedings of the 17th Annual North American Waste-to-Energy Conference  

E-Print Network [OSTI]

models. On the other hand, full-scale grate models have not been used for examining solid waste mixing these phenomena, a full-scale physical model of the reverse acting grate was built and used for investigating residence time analysis using clay, wood and ceramic spheres in a small-scale model of the reverse acting

418

Radioactive Waste Management (Minnesota)  

Broader source: Energy.gov [DOE]

This section regulates the transportation and disposal of high-level radioactive waste in Minnesota, and establishes a Nuclear Waste Council to monitor the federal high-level radioactive waste...

419

Waste Management  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500IIVasudhaSurface.Laboratory30,WP-073.99 4.22PrimaryWaste

420

Decision-maker's guide to wood fuel for small industrial energy users. Final report. [Includes glossary  

SciTech Connect (OSTI)

The technology and economics of various wood energy systems available to the small industrial and commercial energy user are considered. This book is designed to help a plant manager, engineer, or others in a decision-making role to become more familiar with wood fuel systems and make informed decisions about switching to wood as a fuel. The following subjects are discussed: wood combustion, pelletized wood, fuel storage, fuel handling and preparation, combustion equipment, retrofitting fossil-fueled boilers, cogeneration, pollution abatement, and economic considerations of wood fuel use. (MHR)

Levi, M. P.; O'Grady, M. J.

1980-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Hazardous Wastes Management (Alabama)  

Broader source: Energy.gov [DOE]

This legislation gives regulatory authority to the Department of Environmental Management to monitor commercial sites for hazardous wastes; fees on waste received at such sites; hearings and...

422

Waste Treatment Plant Overview  

Office of Environmental Management (EM)

contracted Bechtel National, Inc., to design and build the world's largest radioactive waste treatment plant. The Waste Treatment and Immobilization Plant (WTP), also known as the...

423

Salt Waste Processing Initiatives  

Office of Environmental Management (EM)

1 Patricia Suggs Salt Processing Team Lead Assistant Manager for Waste Disposition Project Office of Environmental Management Savannah River Site Salt Waste Processing Initiatives...

424

Solid Waste (New Mexico)  

Broader source: Energy.gov [DOE]

The New Mexico Environment Department's Solid Waste Bureau manages solid waste in the state. The Bureau implements and enforces the rules established by the Environmental Improvement Board.

425

Nuclear Waste Reduction  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Nuclear Waste Reduction Pyroprocessing is a promising technology for recycling used nuclear fuel and improving the associated waste management options. The process...

426

Radioactive Waste Management  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish policies and guidelines by which the Department of Energy (DOE) manages tis radioactive waste, waste byproducts, and radioactively contaminated surplus facilities.

1984-02-06T23:59:59.000Z

427

Transuranic Waste Requirements  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The guide provides criteria for determining if a waste is to be managed in accordance with DOE M 435.1-1, Chapter III, Transuranic Waste Requirements.

1999-07-09T23:59:59.000Z

428

Radioactive and chemotoxic wastes: Only radioactive wastes?  

SciTech Connect (OSTI)

Radioactive waste arising from Italian Nuclear Power Plants and Research Centers, classified as 1st and 2nd Category wastes, are managed only as radioactive wastes following the Technical Guide No. 26 issued by the Italian Regulatory Body: ENEA DISP on 1987. A very important Regulatory Regime revision for Italian Nuclear Activities started at the end of 1991. This paper considers the need to develop a new strategy dedicated to mixed waste in line with current international trends.

Eletti, G.F.; Tocci, M. [ENEA DISP, Rome (Italy)

1993-12-31T23:59:59.000Z

429

Solid Waste and Infectious Waste Regulations (Ohio)  

Broader source: Energy.gov [DOE]

This chapter of the law that establishes the Ohio Environmental Protection Agency establishes the rules and regulations regarding solid waste.

430

WasteTraining Booklet Waste & Recycling Impacts  

E-Print Network [OSTI]

WasteTraining Booklet #12;Waste & Recycling Impacts Environment: The majority of our municipal jobs while recycling 10,000 tons of waste creates 36 jobs. Environment: Recycling conserves resources. It takes 95% less energy to make aluminum from recycled aluminum than from virgin materials, 60% less

Saldin, Dilano

431

Comminution process to produce precision wood particles of uniform size and shape with disrupted grain structure from wood chips  

DOE Patents [OSTI]

A process of comminution of wood chips (C) having a grain direction to produce a mixture of wood particles (P), wherein the wood chips are characterized by an average length dimension (L.sub.C) as measured substantially parallel to the grain, an average width dimension (W.sub.C) as measured normal to L.sub.C and aligned cross grain, and an average height dimension (H.sub.C) as measured normal to W.sub.C and L.sub.C, and wherein the comminution process comprises the step of feeding the wood chips in a direction of travel substantially randomly to the grain direction through a counter rotating pair of intermeshing arrays of cutting discs (D) arrayed axially perpendicular to the direction of wood chip travel, wherein the cutting discs have a uniform thickness (T.sub.D), and wherein at least one of L.sub.C, W.sub.C, and H.sub.C is greater than T.sub.D.

Dooley, James H; Lanning, David N

2013-08-13T23:59:59.000Z

432

Equipment Design and Cost Estimation for Small Modular Biomass Systems, Synthesis Gas Cleanup, and Oxygen Separation Equipment; Task 2: Gas Cleanup Design and Cost Estimates -- Black Liquor Gasification  

SciTech Connect (OSTI)

As part of Task 2, Gas Cleanup and Cost Estimates, Nexant investigated the appropriate process scheme for removal of acid gases from black liquor-derived syngas for use in both power and liquid fuels synthesis. Two 3,200 metric tonne per day gasification schemes, both low-temperature/low-pressure (1100 deg F, 40 psi) and high-temperature/high-pressure (1800 deg F, 500 psi) were used for syngas production. Initial syngas conditions from each of the gasifiers was provided to the team by the National Renewable Energy Laboratory and Princeton University. Nexant was the prime contractor and principal investigator during this task; technical assistance was provided by both GTI and Emery Energy.

Nexant Inc.

2006-05-01T23:59:59.000Z

433

Hanford Site annual dangerous waste report: Volume 4, Waste Management Facility report, Radioactive mixed waste  

SciTech Connect (OSTI)

This report contains information on radioactive mixed wastes at the Hanford Site. Information consists of shipment date, physical state, chemical nature, waste description, handling method and containment vessel, waste number, waste designation and amount of waste.

NONE

1994-12-31T23:59:59.000Z

434

Hanford Site annual dangerous waste report: Volume 2, Generator dangerous waste report, radioactive mixed waste  

SciTech Connect (OSTI)

This report contains information on radioactive mixed wastes at the Hanford Site. Information consists of shipment date, physical state, chemical nature, waste description, waste number, waste designation, weight, and waste designation.

NONE

1994-12-31T23:59:59.000Z

435

Corn steep liquor and fermented ammoniated condensed whey as protein sources for lactating cows and yearling heifers grazing winter native range  

SciTech Connect (OSTI)

Corn steep liquor (CSL) and fermented ammoniated condensed whey (FACW) were compared to cottonseed meal (CSM) as protein sources for wintering 61 lactating first-calf Hereford heifers and 32 yearling Hereford heifers on native range. Cattle were allotted by weight and individually fed 6 days per week for 12 weeks one of four protein treatments: negative control (NC), positive control (PC), CSL and FACW to provide .7, 1.5, .15 and 1.5 lb crude protein (CP) per day, respectively, to the lacating heifers and .2, .4, .4 and .4lb cP per day, respectively, to the yearling heifers. CMS was supplied in the CSL and FACW treatments at the same level as in the negative control. Lactating heifers fed the NC lost more (P less than .005) weight and body condition (120 lb and 1.6 units) than those fed the PC (45.8 lb and .9 units). Weight and condition losses were similar (P more than .05) for lactating heifers fed PC, CSL and FACW. Yearling heifers fed the NC lost more (P less than .005) weight than those fed the PC (49.4 vs 10.6 lb). Yearling heifers fed CSL and FACW gained more (P less than .005) weight than those fed the PC (17.6 and 9.3 vs - 10.6 lb). Feeding CSL resulted in signficantly lower rumen pH, lower ruminal acetate and higher ruminal butyrate, isovalerate and caproate levels than did feeding either control. Supplementing with FACW produced significantly lower rumen pH, higher rumen ammonia and soluble carbohydrate levels, lower ruminal acetate, and higher ruminal propionate and butyrate concentrations than did either control supplement. Corn steep liquor and FDCW appear to be effective protein sources for cows and heifers grazing winter native range.

Wagner, J.J.; Lusby, K.S.; Horn, G.W.; Dvorak, M.J.

1982-06-01T23:59:59.000Z

436

Black Liquor Combustion Validated Recovery Boiler Modeling, Final Year Report, Volume 2: Appendix I, Section 5, and Appendix II, Section 1  

SciTech Connect (OSTI)

This project was initiated in October 1990 with the objective of developing and validating a new computer model of a recovery boiler furnace using a computational fluid dynamics (CFD) code specifically tailored to the requirements for solving recovery boiler flows, and using improved submodels for black liquor combustion based on continued laboratory fundamental studies. Many of these objectives were accomplished at the end of the first five years and documented in a comprehensive report on that work (DOE/CE/40936-T3, 1996). A critical review of recovery boiler modeling, carried out in 1995, concluded that further enhancements of the model were needed to make reliable predictions of key output variables. In addition, there was a need for sufficient understanding of fouling and plugging processes to allow model outputs to be interpreted in terms of the effect on plugging and fouling. As a result, the project was restructured and reinitiated at the end of October 1995, and was completed in June 1997. The entire project is now complete and this report summarizes all of the work done on the project since it was restructured. The key tasks to be accomplished under the restructured project were to (1) Complete the development of enhanced furnace models that have the capability to accurately predict carryover, emissions behavior, dust concentrations, gas temperatures, and wall heat fluxes; (2) Validate the enhanced furnace models, so that users can have confidence in the results; (3) Obtain fundamental information on aerosol formation, deposition, and hardening so as to develop the knowledge base needed to relate furnace model outputs to plugging and fouling in the convective sections of the boiler; and (4) Facilitate the transfer of codes, black liquor submodels, and fundamental knowledge to the U.S. kraft pulp industry.

T.M. Grace, W.J. Frederick, M. Salcudean, R.A. Wessel

1998-08-01T23:59:59.000Z

437

Black Liquor Combustion Validated Recovery Boiler Modeling, Final Year Report, Volume 1: Main Text and Appendix I, Sections 1-4  

SciTech Connect (OSTI)

This project was initiated in October 1990 with the objective of developing and validating a new computer model of a recovery boiler furnace using a computational fluid dynamics (CFD) code specifically tailored to the requirements for solving recovery boiler flows, and using improved submodels for black liquor combustion based on continued laboratory fundamental studies. Many of these objectives were accomplished at the end of the first five years and documented in a comprehensive report on that work (DOE/CE/40936-T3, 1996). A critical review of recovery boiler modeling, carried out in 1995, concluded that further enhancements of the model were needed to make reliable predictions of key output variables. In addition, there was a need for sufficient understanding of fouling and plugging processes to allow model outputs to be interpreted in terms of the effect on plugging and fouling. As a result, the project was restructured and reinitiated at the end of October 1995, and was completed in June 1997. The entire project is now complete and this report summarizes all of the work done on the project since it was restructured. The key tasks to be accomplished under the restructured project were to (1) Complete the development of enhanced furnace models that have the capability to accurately predict carryover, emissions behavior, dust concentrations, gas temperatures, and wall heat fluxes; (2) Validate the enhanced furnace models, so that users can have confidence in the results; (3) Obtain fundamental information on aerosol formation, deposition, and hardening so as to develop the knowledge base needed to relate furnace model outputs to plugging and fouling in the convective sections of the boiler. Facilitate the transfer of codes, black liquor submodels, and fundamental knowledge to the U.S. kraft pulp industry.

T.M. Grace, W.J. Frederick, M. Salcudean, R.A. Wessel

1998-08-01T23:59:59.000Z

438

Metals Concentrations in Soils Below Decks Made of CCA-Treated Wood  

E-Print Network [OSTI]

Metals Concentrations in Soils Below Decks Made of CCA-Treated Wood This report is an excerpt from the report titled: New Lines of CCA-Treated Wood Research, In-Service and Disposal Issues Which was finalized

Florida, University of

439

Cavity availability and use in hardwood forests with emphasis on wood ducks  

E-Print Network [OSTI]

-oak (Pinus spp.-Quercus spp.) forest stands, respectively. Cavities with entrance dimensions suitable for entry by wood ducks (Aix sponsa) were inspected for suitability as wood duck nesting sites. Total cavity densities were similar between forest stands...

Wolter, Derrick Wayne

2002-01-01T23:59:59.000Z

440

FRED E. WOOD University of California, Davis, Ph.D., Inorganic and Bioinorganic Chemistry, 1984  

E-Print Network [OSTI]

FRED E. WOOD EDUCATION University of California, Davis, Ph.D., Inorganic and Bioinorganic Chemistry scholarship and $1 million for endowed reentry student scholarships. #12;FRED E. WOOD Page 2 Obtained over

Amin, S. Massoud

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Simulating the dynamics of flexible wood pulp fibres in suspension John M. Stockie  

E-Print Network [OSTI]

, including wood pulp processing, polymer composites, and formation of fibre-reinforced materials elements to form a surface that re- sists bending and stretching. This is a natural construction for wood

Stockie, John

442

Milnor-Wood type inequalities for Higgs bundles  

E-Print Network [OSTI]

We explain how the generalized Milnor-Wood inequality of Burger and Iozzi for reductive representations of a cocompact complex-hyperbolic lattice into a Hermitian Lie group translates under Simpson's non-abelian Hodge correspondence into an inequality for topological invariants of the corresponding Higgs bundles. In this way, we obtain an inequality that holds for all Hermitian Lie groups, generalizing the Milnor-Wood type inequalities for Higgs bundles that have been proved for the classical Hermitian Lie groups by Bradlow, Garcia-Prada, and Gothen and by Koziarz and Maubon.

Hartnick, Tobias

2011-01-01T23:59:59.000Z

443

A collection of wood properties. Version 1.1  

SciTech Connect (OSTI)

Reference books are the primary source of wood property data for use in research, school, or business. it has been our experience that obtaining the needed data from several references can be a cumbersome and time-consuming ordeal. These spreadsheets are a compilation of data from several well-known references. Version 1.1 includes the most recent update of commercial woods of the United States and the world. It is intended that they be used for quick summaries, comparisons, and calculations to increase the efficiency of the professional user in report preparation.

Toennisson, R.L.

1992-09-01T23:59:59.000Z

444

Central Waste Complex (CWC) Waste Analysis Plan  

SciTech Connect (OSTI)

The purpose of this waste analysis plan (WAP) is to document the waste acceptance process, sampling methodologies, analytical techniques, and overall processes that are undertaken for waste accepted for storage at the Central Waste Complex (CWC), which is located in the 200 West Area of the Hanford Facility, Richland, Washington. Because dangerous waste does not include the source special nuclear and by-product material components of mixed waste, radionuclides are not within the scope of this document. The information on radionuclides is provided only for general knowledge. This document has been revised to meet the interim status waste analysis plan requirements of Washington Administrative Code (WAC) 173 303-300(5). When the final status permit is issued, permit conditions will be incorporated and this document will be revised accordingly.

ELLEFSON, M.D.

2000-01-06T23:59:59.000Z

445

Aluminum Waste Reaction Indicators in a Municipal Solid Waste Landfill  

E-Print Network [OSTI]

Aluminum Waste Reaction Indicators in a Municipal Solid Waste Landfill Timothy D. Stark, F.ASCE1 landfills may contain aluminum from residential and commercial solid waste, industrial waste, and aluminum pro- duction wastes. Some aluminum-bearing waste materials, particularly aluminum production wastes

446

Radioactive mixed waste disposal  

SciTech Connect (OSTI)

Various types of waste have been generated during the 50-year history of the Hanford Site. Regulatory changes in the last 20 years have provided the emphasis for better management of these wastes. Interpretations of the Atomic Energy Act of 1954 (AEA), the Resource Conservation and Recovery Act of 1976 (RCRA), and the Hazardous and Solid Waste Amendments (HSWA) have led to the definition of radioactive mixed wastes (RMW). The radioactive and hazardous properties of these wastes have resulted in the initiation of special projects for the management of these wastes. Other solid wastes at the Hanford Site include low-level wastes, transuranic (TRU), and nonradioactive hazardous wastes. This paper describes a system for the treatment, storage, and disposal (TSD) of solid radioactive waste.

Jasen, W.G.; Erpenbeck, E.G.

1993-02-01T23:59:59.000Z

447

Understanding radioactive waste  

SciTech Connect (OSTI)

This document contains information on all aspects of radioactive wastes. Facts are presented about radioactive wastes simply, clearly and in an unbiased manner which makes the information readily accessible to the interested public. The contents are as follows: questions and concerns about wastes; atoms and chemistry; radioactivity; kinds of radiation; biological effects of radiation; radiation standards and protection; fission and fission products; the Manhattan Project; defense and development; uses of isotopes and radiation; classification of wastes; spent fuels from nuclear reactors; storage of spent fuel; reprocessing, recycling, and resources; uranium mill tailings; low-level wastes; transportation; methods of handling high-level nuclear wastes; project salt vault; multiple barrier approach; research on waste isolation; legal requiremnts; the national waste management program; societal aspects of radioactive wastes; perspectives; glossary; appendix A (scientific American articles); appendix B (reference material on wastes). (ATT)

Murray, R.L.

1981-12-01T23:59:59.000Z

448

Management of Discarded Treated Wood Products: A Resource Guide for Generators  

E-Print Network [OSTI]

Management of Discarded Treated Wood Products: A Resource Guide for Generators Prepared by have been conducting research on treated wood since 1996. During the course of the research, there have been numerous inquiries about the disposal and management options for treated wood products. There has

Florida, University of

449

Preservative leaching from weathered CCA-treated wood Timothy Townsenda,*, Brajesh Dubeya  

E-Print Network [OSTI]

Preservative leaching from weathered CCA-treated wood Timothy Townsenda,*, Brajesh Dubeya , Thabet copper arsenate (CCA)-treated wood in landfills raises concerns with respect to leaching of preservative compounds. When unweathered CCA-treated wood is leached using the toxicity characteristic leaching procedure

Florida, University of

450

Implications for the Future of Treated Wood in Four U.S. Demand Sectors  

E-Print Network [OSTI]

Implications for the Future of Treated Wood in Four U.S. Demand Sectors Todd F. Shupe Associate extends the life span of lumber, but the Environmental Protection Agency says arsenic treated wood might arsenic-treated wood from Florida's public playgrounds failed to pass. "Wave of opponents kills Crow

451

Attitudes and Awareness about Treated Wood Products: The U.S. South Homeowner Perspective  

E-Print Network [OSTI]

Attitudes and Awareness about Treated Wood Products: The U.S. South Homeowner Perspective is preservative-treated (SFPA 2004). In light of increasing market penetration from non-wood alternatives homeowner attitudes and awareness about using treated wood Strategic decisions can be made to better

Wu, Qinglin

452

U.S. Playground Equipment Manufacturer and Purchaser Perceptions of Treated Wood  

E-Print Network [OSTI]

U.S. Playground Equipment Manufacturer and Purchaser Perceptions of Treated Wood Todd F. Shupe treated wood might cut life short for our children. "EPA chops down potential killer", 24 Hour News 8, Florida, after his bill to ban arsenic-treated wood from Florida's public playgrounds failed to pass

453

Modeling Sediment and Wood Storage and Dynamics in Small Mountainous Watersheds  

E-Print Network [OSTI]

85 Modeling Sediment and Wood Storage and Dynamics in Small Mountainous Watersheds Stephen T controls on supply and transport of sediment and wood in a small (approximately two square kilometers) basin in the Oregon Coast Range, typical of streams at the interface between episodic sediment and wood

454

Matrix penetration in the bulk:In uence of humidity: Morphological analysis of wood welding  

E-Print Network [OSTI]

Matrix penetration in the bulk:In uence of humidity: Morphological analysis of wood welding.pichelin@b .ch Context: Wood can be welded using linear vibration welding tech- niques similar to the ones in plastic and metal industry[1] . Wood welding allows bonding strength similar to glued joints. However, due

Dalang, Robert C.

455

A SIMPLE PROOF OF THE FARY-WAGNER THEOREM DAVID R. WOOD  

E-Print Network [OSTI]

A SIMPLE PROOF OF THE F´ARY-WAGNER THEOREM DAVID R. WOOD The purpose of this note is to give at most two. 1 #12;2 DAVID R. WOOD denote the circle of radius centred at s. For each neighbour: david.wood@upc.edu #12;

Wood, David R.

456

Are reefs and mud mounds really so different? Rachel Wood ,1  

E-Print Network [OSTI]

Are reefs and mud mounds really so different? Rachel Wood ,1 Department of Earth Sciences-1223-333-450. E-mail address: rw43@esc.cam.ac.uk (R. Wood). 1 Current address: Schlu¨mberger Cambridge Research). While mud mounds are now accepted to be rigid, framework reefs (see Pratt, 1982; 1995; Webb, 1996; Wood

457

Wood science education in a changing world: A case study of the  

E-Print Network [OSTI]

Wood science education in a changing world: A case study of the UMASS-Amherst building materials & wood technology program, 1965-2005 David T. Damery Peggi Clouston Paul R. Fisette Abstract This paper discusses the historical and current day need for education in the area of building materials and wood

Schweik, Charles M.

458

WOOD DUCK BROOD MOVEMENTS AND HABITAT USE ON PRAIRIE RIVERS IN SOUTH DAKOTA  

E-Print Network [OSTI]

WOOD DUCK BROOD MOVEMENTS AND HABITAT USE ON PRAIRIE RIVERS IN SOUTH DAKOTA DIANE A. GRANFORS.'·2. SD 57007. USA ~ .· Absfm£'f: Wood duck (Air SI)0/1.5O) populations have been increasing in the Central Flyway. but little is known about wood duck brood rearing in prairie e

459

Wood piece quality evaluation using Choquet integral and fuzzy merging Jeremy Jover1,2  

E-Print Network [OSTI]

Wood piece quality evaluation using Choquet integral and fuzzy merging Jeremy Jover1,2 , Vincent,fuzzy operators, Choquet integral, divergent process Abstract: This paper presents a way to evaluate the wood (what is ideally expected). The wood industry is also concerned by these di- vergent process problems

Paris-Sud XI, Université de

460

ORIGINAL PAPER L. Voc adlo K. S. Knight G. D. Price I. G. Wood  

E-Print Network [OSTI]

ORIGINAL PAPER L. VocÏ adlo á K. S. Knight á G. D. Price á I. G. Wood Thermal expansion and crystal discussed by Wood et al. (1996), VocÏ adlo et al. (1999, 2000) and Mattheiss and Hamann (1993002690100202 L. VocÏ adlo (&) á G. D. Price á I. G. Wood Department of Geological Sciences, University College

Vocadlo, Lidunka

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Large wood recruitment and redistribution in headwater streams in the southern Oregon Coast  

E-Print Network [OSTI]

Large wood recruitment and redistribution in headwater streams in the southern Oregon Coast Range, U.S.A.1 Christine L. May and Robert E. Gresswell Abstract: Large wood recruitment and redistribution and topographic setting strongly influenced processes that delivered wood to the channel network. In small

May, Christine L.

462

Wood Transportation Systems-A Spin-Off of a Computerized Information  

E-Print Network [OSTI]

Wood Transportation Systems-A Spin-Off of a Computerized Information and Mapping Technique William of the system to determine the allocation and association of wood sources and markets. INTRODUCTION In December strategies of wood origins and potential markets to be correlated very accurately and rapidly. Transportation

Standiford, Richard B.

463

Streamlined LCA of Wood Pellets: Export and Possible Utilization in UBC  

E-Print Network [OSTI]

Streamlined LCA of Wood Pellets: Export and Possible Utilization in UBC Boiler House CHBE 573 Ann Pa May 15, 2009 #12;2 | P a g e INTRODUCTION Wood pellets are a type of biofuels and are often made. Like all biofuels, wood pellets are carbon- neutral and renewable and are very popular in Europe

464

Illegal loggin and wood energy: UNECE Timber Committee discusses policy issues of the day SEARCH SITEMAP  

E-Print Network [OSTI]

two of the most complex and topical policy issues facing the forest and timber sector: q wood energyIllegal loggin and wood energy: UNECE Timber Committee discusses policy issues of the day SEARCH SITEMAP PRESS RELEASE [Index] Illegal logging and wood energy: UNECE Timber Committee discusses policy

465

Energy flow and ecosystem dynamics and wood energy in forest ecosystems  

E-Print Network [OSTI]

Energy flow and ecosystem dynamics and wood energy in forest ecosystems S.M.C.U.P. Subasinghe respectively. The forests are the most important ecosystems in wood energy aspect. Other than the energy all Originally published in the Proceedings of Workshop of Training of Trainers in Wood Energy Aspects in Sri

466

Society of Wood Science and Technology Convention 10-12 November 2008, Concepcin, Chile  

E-Print Network [OSTI]

Society of Wood Science and Technology Convention 10-12 November 2008, Concepción, Chile Global #12;Society of Wood Science and Technology Convention 10-12 November 2008, Concepción, Chile Subjects;Society of Wood Science and Technology Convention 10-12 November 2008, Concepción, Chile Main sources

467

Name: Qinglin Wu Title: Roy O Martin Sr. Professor, Composites and Engineered Wood Products  

E-Print Network [OSTI]

(ASTM), Philadelphia, PA · Forest Products Society, Madison, WI · Society of Wood and Science Technology Organizations · International Research Group in Wood Preservation, Stockholm, Sweden · American Chemical Society (ACS) · American Wood Preservation Association (AWPA) · American Society for Testing and Materials

468

SECTION 50 Table of Contents 50 Lake Rufus Woods Management Plan .........................................................2  

E-Print Network [OSTI]

and formation of the Subbasin Work Teams and the process used to develop and adopt the management plan can50-1 SECTION 50 ­ Table of Contents 50 Lake Rufus Woods Management Plan .........................................................................28 #12;50-2 50 Lake Rufus Woods Management Plan The Lake Rufus Woods Subbasin Management Plan

469

Radioactive Waste Management Manual  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Manual further describes the requirements and establishes specific responsibilities for implementing DOE O 435.1, Radioactive Waste Management, for the management of DOE high-level waste, transuranic waste, low-level waste, and the radioactive component of mixed waste. Change 1 dated 6/19/01 removes the requirement that Headquarters is to be notified and the Office of Environment, Safety and Health consulted for exemptions for use of non-DOE treatment facilities. Certified 1-9-07.

1999-07-09T23:59:59.000Z

470

INFLUENCE OF TORREFACTION TREATMENT ON WOOD POWDER PROPERTIES M. Almendrosa  

E-Print Network [OSTI]

is a thermal pretreatment of lignocellulosic biomass before gazification. This mild form of pyrolysis, carried. The studied parameters are (i) the species of the biomass (spruce and beech) (ii) the torrefaction temperature: biomass to liquid (BtL), lignocellulosic sources, wood, torrefaction, analysis, characterization. 1

Boyer, Edmond

471

U.S. Homeowner of Perceptions of Treated Wood  

E-Print Network [OSTI]

U.S. Homeowner of Perceptions of Treated Wood Todd F. Shupe Extension Specialist Forest Products% Naturally durable species (cedar, redwood) 19% 56% 25% Treated lumber products 18% 67% 15% Untreated lumber Stating Agree or Strongly Agree Plastic 3.6 55% Steel 3.4 48% Treated Lumber 3.3 38% Concrete 2.8 24

472

Wood Fuel Future: The Potential Web Text December 2010  

E-Print Network [OSTI]

Wth for one family, with larger scale systems of 1 MWth heating 200 houses. Small scale wood fuel electricity provide electricity for up to 30,000 houses. Many electricity generating systems also produce heat and are called Combined Heat and Power systems. kWth = kilowatt thermal (i.e. heat) kWe = kilowatt electricity

473

Physiological Insights Towards Improving Fish Culture L. CURRY WOODS III*  

E-Print Network [OSTI]

Physiological Insights Towards Improving Fish Culture L. CURRY WOODS III* Department of Animal, and American Fisheries Society (AFS) Fish Culture Section, was held February 26 through March 2, 2007, in San Antonio, Texas. At this meeting, the AFS Fish Culture and Fish Physiol- ogy Sections co

Hamza, Iqbal

474

Wood-Fiber/High-Density-Polyethylene Composites: Coupling Agent Performance  

E-Print Network [OSTI]

Wood-Fiber/High-Density-Polyethylene Composites: Coupling Agent Performance John Z. Lu,1 Qinglin Wu structure. As a coupling agent, mal- eated polyethylene (MAPE) had a better performance in WPC than oxidized polyethylene (OPE) and pure polyeth- ylene (PPE) because of its stronger interfacial bonding. A combination

475

Vertical feed stick wood fuel burning furnace system  

DOE Patents [OSTI]

A new and improved stove or furnace for efficient combustion of wood fuel including a vertical feed combustion chamber for receiving and supporting wood fuel in a vertical attitude or stack, a major upper portion of the combustion chamber column comprising a water jacket for coupling to a source of water or heat transfer fluid and for convection circulation of the fluid for confining the locus of wood fuel combustion to the bottom of the vertical gravity feed combustion chamber. A flue gas propagation delay channel extending from the laterally directed draft outlet affords delayed travel time in a high temperature environment to assure substantially complete combustion of the gaseous products of wood burning with forced air as an actively induced draft draws the fuel gas and air mixture laterally through the combustion and high temperature zone. Active sources of forced air and induced draft are included, multiple use and circuit couplings for the recovered heat, and construction features in the refractory material substructure and metal component superstructure.

Hill, Richard C. (Orono, ME)

1984-01-01T23:59:59.000Z

476

Production of chemical feedstock by the methanolysis of wood  

DOE Patents [OSTI]

A process for the production of ethylene, benzene and carbon monoxide from particulated biomass such as wood by reaction with methane at a temperature of from 700.degree. C. to 1200.degree. C., at a pressure of from 20 psi to 100 psi for a period of from 0.2 to 10 seconds.

Steinberg, Meyer (Melville, NY); Fallon, Peter (East Moriches, NY)

1984-07-31T23:59:59.000Z

477

Vertical feed stick wood fuel burning furnace system  

DOE Patents [OSTI]

A stove or furnace for efficient combustion of wood fuel includes a vertical feed combustion chamber (15) for receiving and supporting wood fuel in a vertical attitude or stack. A major upper portion of the combustion chamber column comprises a water jacket (14) for coupling to a source of water or heat transfer fluid for convection circulation of the fluid. The locus (31) of wood fuel combustion is thereby confined to the refractory base of the combustion chamber. A flue gas propagation delay channel (34) extending laterally from the base of the chamber affords delayed travel time in a high temperature refractory environment sufficient to assure substantially complete combustion of the gaseous products of wood burning with forced air prior to extraction of heat in heat exchanger (16). Induced draft draws the fuel gas and air mixture laterally through the combustion chamber and refractory high temperature zone to the heat exchanger and flue. Also included are active sources of forced air and induced draft, multiple circuit couplings for the recovered heat, and construction features in the refractory material substructure and metal component superstructure.

Hill, Richard C. (Orono, ME)

1982-01-01T23:59:59.000Z

478

An Overview of the Louisiana Primary Solid Wood Products Industry  

E-Print Network [OSTI]

Laboratory can better serve Louisiana companies in this industry sector. Results include a discussion in Louisiana consists of 81 companies compared to approximately 750 companies in the secondary wood products sector. * Just over 36 percent of companies surveyed have 50 employees or more and 18.2 percent have 200

479

The Wood-Based Biorefinery in a Petroleum Depleted World  

E-Print Network [OSTI]

3 Year Old Willow #12;14 14 Woody Biomass Feedstocks Sustainably harvested low value wood from, Sustainable Bioproducts: Fuels, Chemicals, Materials Renewable Resources to "Green" Bio-Products Woody Biomass Feedstock #12;5 5 Spindletop at Beaumont, TX Circa late 1890's Birth of the Petroleum Industry in Texas

Chatterjee, Avik P.

480

HISTORICAL WOOD COLLECTION AT THE DENDROCHRONOLOGY LABORATORY, VYTAUTAS MAGNUS  

E-Print Network [OSTI]

investigations. Subfossil oaks from river gravels, pines from peat bogs and wood from archeological excavations.) samples were collected in two peat bogs with pine trunks embedded in oligotrophic peat layers. One more than 300 samples of pine stumps and stems preserved in oligotrophic peat layers were coll

Note: This page contains sample records for the topic "liquor wood waste" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

APPLICATION OF NELSON'S SORPTION ISOTHERM TO WOOD COMPOSITES AND OVERLAYS'  

E-Print Network [OSTI]

APPLICATION OF NELSON'S SORPTION ISOTHERM TO WOOD COMPOSITES AND OVERLAYS' Qinglin Wu Assistant. It was found that Nelson's model can be used to describe the experimental data from different composite composite materials (Suchsland 1972). These relationships, known as sorption isotherms, greatly affect

482

Bryan H. Wood Assistant Deputy Commandant of the Marine Corps  

E-Print Network [OSTI]

and stations throughout the world and for the operating forces across the U.S. Marine Corps. Mr. Wood advisor to the Commander, Combined Joint Task Force- Horn of Africa (CJTF-HOA) in Djibouti, Africa. Mr as the Environmental Law Section Head and Senior Associate Counsel (Environment/ Safety), Naval Sea Systems Command

483

Potential for comparison drying of green wood chip fuel  

SciTech Connect (OSTI)

Equipment currently designed for and in use by the forest products industry for the dewatering of wood bark and chips by mechanical pressure can only reduce the moisture content (MC) to 45 or 50% (wet basis). Thus, this equipment is suited to remove water added in processing but not free water normally present in green wood. Exploratory research described in this paper has shown on a laboratory scale that the proper application of high pressure to green wood chips can remove the water from cell lumens, thus reducing the MC to 35% or less. Further, this water removal may be accomplished in an energy efficient manner. The ratio of energy increase of the fuel (increase in recoverable heat) to the mechanical energy required for water removal was found to vary from 67:1 to 240:1. This ratio depends upon wood specific gravity (SG) green MC, and mode of compression. A theoretical relationship between volumetric compression, MC, SG, and water extracted was developed and tested on several species of softwoods and hardwoods. The cost savings for fuel and boiler investment in a hypothetical situation are presented to illustrate the economic potential of the process if production scale equipment can be developed. (17 references).

Haygreen, J.G.

1981-08-01T23:59:59.000Z

484

AN EXAMINATION OF WOOD RECYCLING PROVISIONS IN NORTH AMERICAN GREEN  

E-Print Network [OSTI]

-use and recycling. About 90 green building standards were examined. Current green building programs were determined (ASHRAE) come closest to universally describing the differences between these terms: Recovered Material Building Standards To understand how wood recycling is addressed in green building standards, about 90

485

Influence of Nanoclay on Properties of HDPE/Wood Composites  

E-Print Network [OSTI]

Agricultural Center, Baton Rouge, Louisiana 70803 2 Performance Engineered Composites, USDA Forest Service, absence of associated health hazards, easy fiber surface modification, wide availability, and relative, espe- cially wood plastic composites, which have success- fully proven their high qualities in various

486

2014 BRUIN WOODS SUMMER STAFF APPLICATION Name Birth Date  

E-Print Network [OSTI]

2014 BRUIN WOODS SUMMER STAFF APPLICATION Name Birth Date School Address Home Address Phone # ( ) E, Activities and Awards SKILLS, CERTIFICATES & QUALIFICATIONS CAMP SKILLS: On a scale of "0" (no knowledge_____________________________________________________________________________ CERTIFICATIONS (List expiration dates and certifying organizations) Lifeguard Boating Certification Archery

Williams, Gary A.

487

2012 BRUIN WOODS SUMMER STAFF APPLICATION Name Birth Date  

E-Print Network [OSTI]

2012 BRUIN WOODS SUMMER STAFF APPLICATION Name Birth Date School Address Home Address Phone # ( ) E, Activities and Awards SKILLS, CERTIFICATES & QUALIFICATIONS CAMP SKILLS: On a scale of 0 (no knowledge) to 3_____________________________________________________________________________ CERTIFICATIONS (List expiration dates and certifying organizations) Lifeguard Boating Certification NRA Riflery

Grether, Gregory

488

2013 BRUIN WOODS SUMMER STAFF APPLICATION Name Birth Date  

E-Print Network [OSTI]

2013 BRUIN WOODS SUMMER STAFF APPLICATION Name Birth Date School Address Home Address Phone # ( ) E, Activities and Awards SKILLS, CERTIFICATES & QUALIFICATIONS CAMP SKILLS: On a scale of "0" (no knowledge_____________________________________________________________________________ CERTIFICATIONS (List expiration dates and certifying organizations) Lifeguard Boating Certification NRA Riflery

Williams, Gary A.

489

Wood for energy at Bedgebury Forest Bedgebury visitor centre's  

E-Print Network [OSTI]

. #12;Our advice Sweet chestnut coppice is a dense material which chips well at the correct moisture visitor centre as it has a ready supply of wood on its doorstep. Locally-grown coppiced chestnut is cut is locally sourced from 80 hectares of sweet chestnut coppice growing within Bedgebury Forest. The chestnut

490

Nanocellulose A sustainable nanomaterial derived from wood pulp with  

E-Print Network [OSTI]

Nanocellulose A sustainable nanomaterial derived from wood pulp with applications in composites, sensors, and biomedical devices. The Sustainable Nano-Biocomposites lab in the chemical engineering-renewable resources while offering better performance. #12;Research Program Research in the Sustainable Nano

Thompson, Michael

491

Page 2 of 4 TREE Cookies Etc. Got Woods -continued  

E-Print Network [OSTI]

of a forester is to help sell timber, though they can and should be used to write management plans, manage tree plantings, implement intermediate tending treatments to improve the woods, design soil stabilization the tree, the rays (the lateral transporting structures for water and nutrients) are blocked. Finally

Liskiewicz, Maciej

492

An Overview of the Louisiana Secondary Wood Products Industry  

E-Print Network [OSTI]

. Marketing issues were also addressed such as the value of products shipped, market areas served or strategic planning with most companies relying on word-of-mouth to promote products directly to consumers issues identified by respondents regarding the secondary wood product industry improvement are production

493

Production of chemical feedstock by the methanolysis of wood  

DOE Patents [OSTI]

A process is discussed for the production of ethylene, benzene and carbon monoxide from particulated biomass such as wood by reaction with methane at a temperature of from 700/sup 0/C to 1200/sup 0/C, at a pressure of from 20 psi to 100 psi for a period of from 0.2 to 10 seconds.

Steinberg, M.; Fallon, P.

1983-06-01T23:59:59.000Z

494

DEVELOPMENT OF FUEL AND VALUE-ADDED CHEMICALS FROM PYROLYSIS OF WOOD/WASTE PLASTIC MIXTURE.  

E-Print Network [OSTI]

??Highly oxygenated compounds in bio-oil produce negative properties that have hampered fuel development. Copyrolysis with plastics has increased hydrogen content in past research. Py-GC/MS analyses (more)

Bhattacharya, Priyanka

2008-01-01T23:59:59.000Z

495

Georgia Hazardous Waste Management Act  

Broader source: Energy.gov [DOE]

The Georgia Hazardous Waste Management Act (HWMA) describes a comprehensive, Statewide program to manage hazardous wastes through regulating hazardous waste generation, transportation, storage,...

496

Waste Management Quality Assurance Plan  

E-Print Network [OSTI]

Revision 6 Waste Management Quality Assurance Plan Waste6 WM QA Plan Waste Management Quality Assurance Plan LBNL/4 Management Quality Assurance

Waste Management Group

2006-01-01T23:59:59.000Z

497

Hazardous Waste Act (New Mexico)  

Broader source: Energy.gov [DOE]

"Hazardous waste" means any solid waste or combination of solid wastes that because of their quantity, concentration or physical, chemical or infectious characteristics may: cause or significantly...

498

Integration of the Mini-Sulfide Sulfite Anthraquinone (MSS-AQ) Pulping Process and Black Liquor Gasification in a Pulp Mill  

SciTech Connect (OSTI)

As many of the recovery boilers and other pieces of large capital equipment of U.S. pulp mills are nearing the end of their useful life, the pulp and paper industry will soon need to make long-term investments in new technologies. The ability to install integrated, complete systems that are highly efficient will impact the industrys energy use for decades to come. Developing a process for these new systems is key to the adoption of state-of-the-art technologies in the Forest Products industry. This project defined an integrated process model that combines mini-sulfide sulfite anthraquinone (MSS-AQ) pulping and black liquor gasification with a proprietary desulfurization process developed by the Research Triangle Institute. Black liquor gasification is an emerging technology that enables the use of MSS-AQ pulping, which results in higher yield, lower bleaching cost, lower sulfur emissions, and the elimination of causticization requirements. The recently developed gas cleanup/absorber technology can clean the product gas to a state suitable for use in a gas turbine and also regenerate the pulping chemicals needed to for the MSS-AQ pulping process. The combination of three advanced technologies into an integrated design will enable the pulping industry to achieve a new level of efficiency, environmental performance, and cost savings. Because the three technologies are complimentary, their adoption as a streamlined package will ensure their ability to deliver maximum energy and cost savings benefits. The process models developed by this project will enable the successful integration of new technologies into the next generation of chemical pulping mills. When compared to the Kraft reference pulp, the MSS-AQ procedures produced pulps with a 10-15 % yield benefit and the ISO brightness was 1.5-2 times greater. The pulp refined little easier and had a slightly lower apparent sheet density (In both the cases). At similar levels of tear index the MSS-AQ pulps also produced a comparable tensile and burst index pulps. Product gas composition determined using computer simulations The results demonstrate that RVS-1 can effectively remove > 99.8% of the H2S present in simulated synthesis gas generated from the gasification of black liquor. This level of sulfur removal was consistent over simulated synthesis gas mixtures that contained from 6 to 9.5 vol % H2S.A significant amount of the sulfur in the simulated syngas was recovered as SO2 during regeneration. The average recovery of sulfur as SO2 was about 75%. Because these are first cycle results, this sulfur recovery is expected to improve. Developed WINGems model of the process.The total decrease in variable operating costs for the BLG process compared to the HERB was in excess of $6,200,000 per year for a mill producing 350,000 tons of pulp per year. This represents a decrease in operating cost of about $17.7/ton of oven dry pulp produced. There will be additional savings in labor and maintenance cost that has not been taken into account. The capital cost for the MSSAQ based gasifier system was estimated at $164,000,000, which is comparable to a High Efficiency Recovery Boiler. The return on investment was estimated at 4%. A gasifier replacement cannot be justified on its own, however if the recovery boiler needs to be replaced the MSSAQ gasifier system shows significantly higher savings. Before black liquor based gasifer technology can be commercialized more work is necessary. The recovery of the absorbed sulfur in the absorbent as sulfur dioxide is only 75%. This needs to be greater than 90% for economical operation. It has been suggested that as the number of cycles is increased the sulfur dioxide recovery might improve. Further research is necessary. Even though a significant amount of work has been done on a pilot scale gasifiers using liquors containing sulfur, both at low and high temperatures the lack of a commercial unit is an impediment to the implementation of the MSSAQ technology. The implementation of a commercial unit needs to be facilated before the benefits of

Hasan Jameel, North Carolina State University; Adrianna Kirkman, North Carolina State University; Ravi Chandran,Thermochem Recovery International Brian Turk Research Triangle Institute; Brian Green, Research Triangle Institute

2010-01-27T23:59:59.000Z

499

Waste-to-Energy: Waste Management and Energy Production Opportunities...  

Office of Environmental Management (EM)

Waste-to-Energy: Waste Management and Energy Production Opportunities Waste-to-Energy: Waste Management and Energy Production Opportunities July 24, 2014 9:00AM to 3:30PM EDT U.S....

500

Bioelectrochemical Integration of Waste Heat Recovery, Waste...  

Broader source: Energy.gov (indexed) [DOE]

and Waste-to-Chemical Conversion with Industrial Gas and Chemical Manufacturing Processes Air Products and Chemicals, Inc. - Allentown, PA A microbial reverse electrodialysis...

First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11