Powered by Deep Web Technologies
Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Definition: Automated Feeder And Line Switching | Open Energy Information  

Open Energy Info (EERE)

Definition Definition Edit with form History Facebook icon Twitter icon » Definition: Automated Feeder And Line Switching Jump to: navigation, search Dictionary.png Automated Feeder And Line Switching Automated feeder and line switching is realized through automatic isolation and reconfiguration of faulted segments of distribution feeders or transmission lines via sensors, controls, switches, and communications systems. These devices can operate autonomously in response to local events or in response to signals from a central control system.[1] Related Terms transmission lines, transmission line References ↑ SmartGrid.gov 'Description of Functions' An i LikeLike UnlikeLike You like this.Sign Up to see what your friends like. nline Glossary Definition Retrieved from "http://en.openei.org/w/index.php?title=Definition:Automated_Feeder_And_Line_Switching&oldid=480562"

2

Definition: Automated Distribution Circuit Switches | Open Energy  

Open Energy Info (EERE)

Circuit Switches Circuit Switches Jump to: navigation, search Dictionary.png Automated Distribution Circuit Switches Distribution circuit switches that can be operated automatically in response to control signals from local sensors, distribution automation systems, or grid control systems. Such switches can be installed as automated devices or existing equipment can be retrofitted with controls and communications. The degree of automation depends on the controls and communications system implemented. These switches can be opened or closed to isolate portions of a distribution circuit that has experienced a short circuit (fault), or must be taken out of service for maintenance or other operations. When used in combination, these switches can reroute power from other substations or nearby distribution circuits.[1]

3

Automation for on-line remote-control in-situ electron microscopy  

E-Print Network (OSTI)

Pfefferkorn Conference (1996) Automation for On-Line Remote-Pfefferkorn Conference (1996) Automation for On-Line Remote-by incorporating local automation of stage control and

1996-01-01T23:59:59.000Z

4

AUTOMATION IN THE MEAT INDUSTRY | Slaughter Line Operation  

Science Journals Connector (OSTI)

Abstract The strongest incentives for the slaughter industry to adopt automation technology relate to the drive for improved productivity through reduced labor. Automation in the pig slaughter industry has mainly been adopted in regions with high labor costs such as Northern Europe. In New Zealand, the lamb slaughter industry has been progressive in developing and using automation to automate the slaughter process. Automation in beef slaughter is limited because of the complexity associated with handling of the biological variation. Barriers for slaughter line automation include the high cost and complexity associated with the development of slaughter automation technology, combined with limited market size.

J.U. Nielsen; N.T. Madsen; R. Clarke

2014-01-01T23:59:59.000Z

5

ETM (Distribution Network Automation on 10 kV cable line stations...  

Open Energy Info (EERE)

ETM (Distribution Network Automation on 10 kV cable line stations) (Smart Grid Project) Jump to: navigation, search Project Name ETM (Distribution Network Automation on 10 kV cable...

6

Study on integrated automation system of traction substation for express railway lines  

Science Journals Connector (OSTI)

The structure and function of integrated automation system of traction substation for express electric railway lines developed by our university are discussed in this paper. The paper mainly describes the function installation of monitoring and communication ...

Gao Shibin; Chen Xiaochuan; Wang Qian; Wang Ren; Chen Weirong; Xiong Liebin

2002-11-01T23:59:59.000Z

7

Automation and integration of multiplexed on-line sample preparation with capillary electrophoresis for DNA sequencing  

SciTech Connect

The purpose of this research is to develop a multiplexed sample processing system in conjunction with multiplexed capillary electrophoresis for high-throughput DNA sequencing. The concept from DNA template to called bases was first demonstrated with a manually operated single capillary system. Later, an automated microfluidic system with 8 channels based on the same principle was successfully constructed. The instrument automatically processes 8 templates through reaction, purification, denaturation, pre-concentration, injection, separation and detection in a parallel fashion. A multiplexed freeze/thaw switching principle and a distribution network were implemented to manage flow direction and sample transportation. Dye-labeled terminator cycle-sequencing reactions are performed in an 8-capillary array in a hot air thermal cycler. Subsequently, the sequencing ladders are directly loaded into a corresponding size-exclusion chromatographic column operated at {approximately} 60 C for purification. On-line denaturation and stacking injection for capillary electrophoresis is simultaneously accomplished at a cross assembly set at {approximately} 70 C. Not only the separation capillary array but also the reaction capillary array and purification columns can be regenerated after every run. DNA sequencing data from this system allow base calling up to 460 bases with accuracy of 98%.

Tan, H.

1999-03-31T23:59:59.000Z

8

Automated Logic SER Analysis and On-Line SER reduction  

Science Journals Connector (OSTI)

This paper presents a method for automated analysis ofa combinational circuit to find the most SEU sensitive path,and proposes a way to make this path more robust for SEUin a low cost way.

Andre K. Nieuwland; Patrick Gindner

2004-07-01T23:59:59.000Z

9

1 INTRODUCTION We consider network protection (NP) by line switch-  

E-Print Network (OSTI)

framework applied to a realistic case study, i.e. the Italian 380kV power transmission grid, are summa as a network of N nodes (substations or buses) and K edges (transmission lines). Two types of buses that minimizes the consequences of cascading failures on an electrical grid. The 380 kV Italian power

Paris-Sud XI, Université de

10

Total compensation of line-side switching harmonics in converter-fed ac locomotives  

SciTech Connect

PWM controlled line-side converters of modern ac traction locomotives inject harmonic currents into the feeding overhead line. This causes problems of electromagnetic interference. Passive or active filters are usually provided for a partial reduction of the line harmonics. A novel and superior approach employs a switched electronic compensator. It generates an exact replica of the harmonic current, feeding it to the high-voltage transformer to produce a harmonic counter MMF. The transformer main flux is then forced to be sinusoidal, and so is the induced voltage in the primary. The line current, being low-pass filtered by the transformer leakage inductance, assumes a pure sinusoidal waveform. The compensator operates in the low switching frequency range of the main power converters. Its installed power is only 1% of the traction power. Operation, control, and design considerations are described. Results from laboratory tests at full power level are presented.

Krah, J.O.; Holtz, J. [Univ. of Wuppertal (Germany)] [Univ. of Wuppertal (Germany)

1995-11-01T23:59:59.000Z

11

Automated Technique For Comparison Of Magnetic Field Inversion Lines With Filament Skeletons From The Solar Feature Catalogue  

Science Journals Connector (OSTI)

We present an automated technique for comparison of magnetic field inversion-line maps from SOHO/MDI magnetograms with solar ... component labelling are used to identify nearest inversion lines to filament skelet...

S. S. Ipson; V. V. Zharkova; S. Zharkov; A. K. Benkhalil; J. Aboudarham

2005-05-01T23:59:59.000Z

12

Power Transmission Lines: A New Interconnect Design to Eliminate Simultaneous Switching Noise A. Ege Engin and Madhavan Swaminathan  

E-Print Network (OSTI)

Power Transmission Lines: A New Interconnect Design to Eliminate Simultaneous Switching Noise A occurs at discontinuities of the transmission line, wherever there is an interruption of the current that is connected to a transmission line. To reduce this discontinuity, current designs try to maintain a low

Swaminathan, Madhavan

13

ETM (Distribution Network Automation on 10 kV cable line stations) (Smart  

Open Energy Info (EERE)

ETM (Distribution Network Automation on 10 kV cable line stations) (Smart ETM (Distribution Network Automation on 10 kV cable line stations) (Smart Grid Project) Jump to: navigation, search Project Name ETM (Distribution Network Automation on 10 kV cable line stations) Country Hungary Headquarters Location Budapest, Hungary Coordinates 47.498405°, 19.040758° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":47.498405,"lon":19.040758,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

14

Quantum switch for single-photon transport in a coupled superconducting transmission line resonator array  

E-Print Network (OSTI)

We propose and study an approach to realize quantum switch for single-photon transport in a coupled superconducting transmission line resonator (TLR) array with one controllable hopping interaction. We find that the single-photon with arbitrary wavevector can transport in a controllable way in this system. We also study how to realize controllable hopping interaction between two TLRs via a superconducting quantum interference device (SQUID). When the frequency of the SQUID is largely detuned from those of the two TLRs, the variables of the SQUID can be adiabatically eliminated and thus a controllable interaction between two TLRs can be obtained.

Jie-Qiao Liao; Jin-Feng Huang; Yu-xi Liu; Le-Man Kuang; C. P. Sun

2009-04-06T23:59:59.000Z

15

E-Print Network 3.0 - automated production line Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

Nov 1994, pp. 18. Summary: for Pharmaceutical and Food Products,'' Presented at the 1994 RIA Flexible Parts Feeding for Automated Handling... and Automation, v. 10,n. 4, Aug 1994,...

16

An on-line performance optimization of the Switched Reluctance Motor  

E-Print Network (OSTI)

The Switched Reluctance Motor (SRM) has been developed extensively during the past 15 years. Due to the simple motor construction and power converter requirements, SRM drives have been found competitive with traditional AC and DC drives. Optimal...

Tandon, Piyush

2012-06-07T23:59:59.000Z

17

E-Print Network 3.0 - automated on-line solid-phase Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

7 SPECIALREPORTSPECIALREPORT96-1696-16 Development of an Analytical Summary: .R. Berg (1992c) Automation and opti- mization of solid-phase microextraction. Analyti- cal...

18

Exact emulation of a priority queue with a switch and delay lines  

E-Print Network (OSTI)

has to be at least one delay line of length 1, so L 1 = 1.which are all in the delay lines numbered 1, 2, . . . ,m. Thus these delay lines are full. Suppose that at time t

Sarwate, A D; Anantharam, V

2006-01-01T23:59:59.000Z

19

E-Print Network 3.0 - automate on-line sample Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

"On-line Telephone-Bill Payment System... HMI" "Security System Simulator" "Performance Comparison of Distributed Computing Models" "On-line... " "Simulation of How Many Users...

20

Triggered plasma opening switch  

DOE Patents (OSTI)

A triggerable opening switch for a very high voltage and current pulse includes a transmission line extending from a source to a load and having an intermediate switch section including a plasma for conducting electrons between transmission line conductors and a magnetic field for breaking the plasma conduction path and magnetically insulating the electrons when it is desired to open the switch.

Mendel, Clifford W. (Albuquerque, NM)

1988-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

E-Print Network 3.0 - automated on-line separation-preconcentration...  

NLE Websites -- All DOE Office Websites (Extended Search)

Management System... Bhanuprakash: "On-line Greeting Card Mailer" Nancy Grieb: "Software Test Evaluator & Planning Tool Using... Research of Gene Transcriptional Profiling"...

22

Test Automation Test Automation  

E-Print Network (OSTI)

Test Automation Test Automation Mohammad Mousavi Eindhoven University of Technology, The Netherlands Software Testing 2013 Mousavi: Test Automation #12;Test Automation Outline Test Automation Mousavi: Test Automation #12;Test Automation Why? Challenges of Manual Testing Test-case design: Choosing inputs

Mousavi, Mohammad

23

Development of Automated Production Line Processes for Solar Brightfield Modules: Final Report, 1 June 2003-30 November 2007  

SciTech Connect

Summary of progress by Spire Corporation under NREL's PV Manufacturing R&D Project to develop new automated systems for fabricating very large photovoltaic modules.

Nowlan, M.

2008-04-01T23:59:59.000Z

24

Solid-state Marx based two-switch voltage modulator for the On-Line Isotope Mass Separator accelerator at the European Organization for Nuclear Research  

SciTech Connect

A new circuit topology is proposed to replace the actual pulse transformer and thyratron based resonant modulator that supplies the 60 kV target potential for the ion acceleration of the On-Line Isotope Mass Separator accelerator, the stability of which is critical for the mass resolution downstream separator, at the European Organization for Nuclear Research. The improved modulator uses two solid-state switches working together, each one based on the Marx generator concept, operating as series and parallel switches, reducing the stress on the series stacked semiconductors, and also as auxiliary pulse generator in order to fulfill the target requirements. Preliminary results of a 10 kV prototype, using 1200 V insulated gate bipolar transistors and capacitors in the solid-state Marx circuits, ten stages each, with an electrical equivalent circuit of the target, are presented, demonstrating both the improved voltage stability and pulse flexibility potential wanted for this new modulator.

Redondo, L. M.; Canacsinh, H.; Ferrao, N.; Mendes, C. [Instituto Superior de Engenharia de Lisboa (ISEL), R. Conselheiro Emidio Navarro 1, Lisbon 1959-007 (Portugal); Nuclear Physics Center-Lisbon University (CFNUL), Av. Prof. Gama Pinto 2, Lisbon 1649-003 (Portugal); Silva, J. Fernando [Instituto Superior Tecnico (IST), Universidade Tecnica de Lisboa, Av. Rovisco Pais 1, Lisbon 1049-001 (Portugal); Center for Innovation in Electrical and Energy Engineering-TU Lisbon, Av. Rovisco Pais 1, Lisbon 1049-001 (Portugal); Soares, R. [Nuclear Physics Center--Lisbon University (CFNUL), Av. Prof. Gama Pinto 2, Lisbon 1649-003 (Portugal); ABT Group, TE Department, Site de Prevessin, FR-01631 CERN (Switzerland); Schipper, J.; Fowler, A. [ABT Group, TE Department, Site de Prevessin, FR-01631 CERN (Switzerland)

2010-07-15T23:59:59.000Z

25

Follicular unit extraction hair transplant automation: Options in overcoming challenges of the latest technology in hair restoration with the goal of avoiding the line scar  

E-Print Network (OSTI)

extraction hair transplant automation: Options in overcomingis also required [ 4 ]. Automation of various steps of FUEFor example, with automation, increased harvest numbers are

Rashid, Rashid M; Bicknell, Lindsay T Morgan

2012-01-01T23:59:59.000Z

26

Nonlinear control of a coupled PDE/ODE system modeling a switched power converter with a transmission line  

E-Print Network (OSTI)

with a transmission line Jamal Daafouz, Marius Tucsnak and Julie Valein Avril 2014 Abstract We consider an infinite dimensional system modeling a boost converter connected to a load via a transmission line. The governing.tucsnak@univ-lorraine.fr, julie.valein@univ-lorraine.fr 1 #12;converters connected to transmission lines is a very difficult task

Valein, Julie - Institut de Mathématiques ?lie Cartan, Université Henri Poincaré

27

Monitoring of enzymatic hydrolysis of starch by microdialysis sampling coupled on-line to anion exchange chromatography and integrated pulsed electrochemical detection using post-column switching  

SciTech Connect

A quantitative evaluation of the hydrolysis of wheat starch using Termamyl, a thermostable {alpha}-amylase, is reported. Data from the monitoring of the hydrolysis of wheat starch indicated that, after 1 h, glucose and maltooligosaccharides up to DP 7 were the main hydrolysis products and thus enabled optimization of a liquefaction step during the production of L-lactic acid. The monitoring system used, both in the on- and off-line mode, was based on continuous flow microdialysis sampling (CFMS) coupled to anion exchange chromatography and integrated pulsed electrochemical detection (IPED). A microdialysis probe equipped with a 5-mm polysulfone (SPS 4005) membrane, with a molecular-weight cut-off of 5 kDa, was used to sample the hydrolysis products of native wheat starch at 90 C. Characteristic fingerpoint separations were achieved by anion exchange chromatography after enzymatic hydrolysis. Post-column switching improved the detection and, consequently, also quantification of the hydrolysates as fouling of the electrode could be reduced. Maltooligosaccharide standards were used for quantification and to verify the elution of the hydrolysates by spiking the off-line samples.

Torto, N.; Gorton, L.; Emneus, J.; Laurell, T. [Univ. of Lund (Sweden)] [Univ. of Lund (Sweden); Marko-Varga, G. [Astra Draco AB, Lund (Sweden). Bioanalytical Chemistry] [Astra Draco AB, Lund (Sweden). Bioanalytical Chemistry; Akerberg, C.; Zacchi, G. [Univ. of Lund (Sweden). Dept. of Chemical Engineering] [Univ. of Lund (Sweden). Dept. of Chemical Engineering; [Lund Inst. of Tech. (Sweden)

1997-12-05T23:59:59.000Z

28

Automated measurement of grain orientations and on-line determination of complete deformation systems with a TEM  

SciTech Connect

An automated computer technique for the indexing of spot or transmission Kikuchi patterns from any crystal structure has been developed. The patterns are recorded from the fluorescence screen of a PHILIPS EM 430 TEM with an integrating, Peltier cooled CCD camera (PULNIX TM 860N) through a window from outside by replacing the focusing binocular. The frame-grabber board PCLL2 (SPINDLER & HOYER) has a resolution of 8 bit which corresponds to 256 grey levels. To reduce the high range of image contrast, a circular continuous density filter is positioned directly in front of the camera lens. A system for image orientation microscopy requires the automated shift of the beam position on the sample, or alternatively a translation movement of the sample with respect to the stationary primary beam, in well defined steps after each orientation measurement. In the EM 430 TEM the built-in scanning unit is simply used to move the electron probe across the sample. The shift is controlled by the computer through a digital-to-analog converter interface. 6 refs., 2 figs.

Schwarzer, R.A.; Zaefferer, S. [Institut fuer Metallkunde und Metallphysik, Clausthal-Z (Germany)

1995-12-31T23:59:59.000Z

29

Optical Switch  

NLE Websites -- All DOE Office Websites (Extended Search)

seven wonders Optical Switch A key component in the laser chain, an optical switch called a plasma electrode Pockels cell (PEPC), was invented and developed at LLNL. A Pockels cell...

30

Definition: Automated Capacitors | Open Energy Information  

Open Energy Info (EERE)

Capacitors Capacitors Jump to: navigation, search Dictionary.png Automated Capacitors Capacitors can increase the voltage on a distribution circuit by providing reactive power (often referred to as volt-amperes-reactive or VArs). Capacitor banks are switched in discrete steps, either manually, or in response to the voltage at the location where they are connected; typically, distribution capacitor banks are switched in a single step. If the voltage falls too far below the set point, the capacitor is switched in to raise the voltage. If the voltage rises too high above the set point, the capacitor is switched out to lower the voltage. Automated capacitors can be switched in coordination with other voltage control devices with signals from local sensors, distribution automation systems, or grid

31

Cygnus PFL Switch Jitter  

SciTech Connect

The Cygnus Dual Beam Radiographic Facility consists of two identical radiographic sources: Cygnus 1 and Cygnus 2. Each source has the following X-ray output: 1-mm diameter spot size, 4 rads at 1 m, 50-ns full-widthhalf-maximum. The diode pulse has the following electrical specifications: 2.25 MV, 60 kA, 60 ns. This Radiographic Facility is located in an underground tunnel test area at the Nevada Test Site (NTS). The sources were developed to produce high-resolution images on subcritical tests performed at NTS. Subcritical tests are single-shot, high-value events. For this application, it is desirable to maintain a high level of reproducibility in source output. The major components of the Cygnus machines are Marx generator, water-filled pulse forming line (PFL), water-filled coaxial transmission line, threecell inductive voltage adder, and rod-pinch diode. A primary source of fluctuation in Cygnus shot-to-shot performance may be jitter in breakdown of the main PFL switch, which is a self-break switch. The PFL switch breakdown time determines the peak PFL charging voltage, which ultimately affects the source X-ray spectrum and dose. Therefore, PFL switch jitter may contribute to shot-to-shot variation in these parameters, which are crucial to radiographic quality. In this paper we will present PFL switch jitter analysis for both Cygnus machines and present the correlation with dose. For this analysis, the PFL switch on each machine was maintained at a single gap setting, which has been used for the majority of shots at NTS. In addition the PFL switch performance for one larger switch gap setting will be examined.

C. Mitton, G. Corrow, M. Hansen, D. Henderson, et al.

2007-07-21T23:59:59.000Z

32

Cygnus Water Switch Jitter  

SciTech Connect

The Cygnus Dual Beam Radiographic Facility consists of two identical radiographic sources - Cygnus 1 and Cygnus 2. Each source has the following x-ray output: 1-mm diameter spot size, 4 rad at 1 m, 50-ns Full Width Half Max. The diode pulse has the following electrical specifications: 2.25 MV, 60 kA, 60 ns. This Radiographic Facility is located in an underground tunnel test area at the Nevada Test Site (NTS). The sources were developed to produce high-resolution images on subcritical tests which are performed at NTS. Subcritical tests are single-shot, high-value events. For this application, it is desirable to maintain a high level of reproducibility in source output. The major components of the Cygnus machines are: Marx generator, water-filled pulseforming line (PFL), water-filled coaxial transmission line, three-cell inductive voltage adder, and rod-pinch diode. A primary source of fluctuation in Cygnus shot-to-shot performance is jitter in breakdown of the main PFL switch, which is a self-break switch. The PFL switch breakdown time determines the peak PFL charging voltage, which ultimately affects the diode pulse. Therefore, PFL switch jitter contributes to shot-to-shot variation in source endpoint energy and dose. In this paper we will present PFL switch jitter analysis for both Cygnus machines and give the correlation with diode performance. For this analysis the PFL switch on each machine was maintained at a single gap setting which has been used for the majority of shots at NTS. In addition to this analysis, PFL switch performance for different switch gap settings taken recently will be examined. Lastly, implications of source jitter for radiographic diagnosis of subcritical shots will be discussed.

Charles V. Mitton, George D. Corrow, Mark D. Hansen, David J. Henderson, et al.

2008-03-01T23:59:59.000Z

33

776 IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, VOL. 34, NO. 4, JULY/AUGUST 1998 Switched Reluctance Motor Modeling with  

E-Print Network (OSTI)

-line parameter estimation using recursive identification for switched reluctance motors (SRM's) is presented. Index Terms-- Parameter identification, switched reluctance motor modeling, switched reluctance motors. I. INTRODUCTION THE switched reluctance motor (SRM) is a simple, low- cost, and robust motor

Husain, Iqbal

34

Safeguards and security concept for the Secure Automated Fabrication (SAF) and Liquid Metal Reactor (LMR) fuel cycle, SAF line technical support  

SciTech Connect

This report is a safeguards and security concept system review for the secure automated fabrication (SAF) and national liquid metal reactor (LMR) fuel programs.

Schaubert, V.J.; Remley, M.E.; Grantham, L.F.

1986-02-21T23:59:59.000Z

35

Distribution capacitor automation that controls voltage and saves energy  

SciTech Connect

The Electric Distribution Business Line of Southern California Edison Company (SCE) has begun a program to improve the distribution system operations and electrical efficiency. The program, called the Distribution System Efficiency Enhancement Program (DSEEP), consists of five principal projects: Automated Switching, Circuit Lock-Out Alarming, Substation Monitoring and Control, Outage Management, and Distribution Capacitor Automation Project (DCAP). DCAP is the largest and most sophisticated of the projects being implemented. The project takes advantage of fine-tuning customer voltages for conservation voltage regulation (CVR) benefits as well as minimizes line losses by reducing unnecessary reactive power flow. DCAP can also help to increase transmission line and substation capacity by improving system power factor. The DCAP system takes advantage of the distributed processing capability of meters, capacitor controllers, radios, and substation processors. DCAP uses two-way packet radios and new electronic meters that read real-time customer voltages as well as energy consumption. The radios transmit customer meter voltage information and capacitor status to substation processors, where a control algorithm runs to determine which capacitors should be turned on or off. The objective of DCAP is to reduce over-all net energy transfer from the substation to the customer and meet system VAR requirements. SCE has tested the system on 66 circuit capacitors (including 3 substation capacitors) on 18 circuits served from two substations. The positive results of the DCAP demonstrations has led to an aggressive roll-out plan for system-wide implementation of automating over 7600 switched capacitors by year-end 1995.

Williams, B.R.

1994-12-31T23:59:59.000Z

36

Automation Status  

NLE Websites -- All DOE Office Websites (Extended Search)

NREL Manufacturing R&D Workshop NREL Manufacturing R&D Workshop NREL H2/FC Manufacturing R&D Workshop Automation Status Garry Sperrick garry@sperkllc.com 585-259-0311 August 11, 2011 Automation Status NREL Manufacturing R&D Workshop Presentation Overview ƒ Brief Introduction ƒ DOE / NREL - Review & Discussion ƒ Automation Platforms ƒ Automation Processes ƒ Automation Considerations of the Manufacturer ƒ Manufacturer and the Supplier ƒ Three (3) Automation Programs Following these Guidelines ƒ Automotive Component Manufacturing ƒ Medical Manufacturing ƒ Membrane Electrode Assembly Manufacturing ƒ Hypothetical Fuel Cell Manufacturing Platforms August 11, 2011 Automation Status NREL Manufacturing R&D Workshop Professional Bio ƒ Automation Technician - Mobil Chemical

37

E-Print Network 3.0 - ab switched current Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

Engineering 16 Switch Detection in Genetic Regulatory Riccardo Porreca1 Summary: CRP, Fis, GyrAB, and stable RNAs. Vertical lines denote detected switches, while crosses...

38

Home Automation  

E-Print Network (OSTI)

In this paper I briefly discuss the importance of home automation system. Going in to the details I briefly present a real time designed and implemented software and hardware oriented house automation research project, capable of automating house's electricity and providing a security system to detect the presence of unexpected behavior.

Ahmed, Zeeshan

2010-01-01T23:59:59.000Z

39

Cygnus Diverter Switch Analysis  

SciTech Connect

The Cygnus Dual Beam Radiographic Facility consists of two 2.25-MV, 60-kA, 50-ns x-ray sources fielded in an underground laboratory at the Nevada Test Site. The tests performed in this laboratory involve study of the dynamic properties of plutonium and are called subcritical experiments. From end-to-end, the Cygnus machines utilize the following components: Marx generator, water-filled pulse-forming line (PFL), waterfilled coaxial transmission line (WTL), 3-cell inductive voltage adder (IVA), and rod-pinch diode. The upstream WTL interface to the PFL is via a radial insulator with coaxial geometry. The downstream WTL terminates in a manifold where the center conductor splits into three lines which individually connect to each of the IVA cell inputs. There is an impedance mismatch at this juncture. It is a concern that a reflected pulse due to anomalous behavior in the IVA or diode might initiate breakdown upon arrival at the upstream PFL/WTL insulator. Therefore near the beginning of the WTL a radial diverter switch is installed to protect the insulator from over voltage and breakdown. The diverter has adjustable gap spacing, and an in-line aqueous-solution (sodium thiosulfate) resistor array for energy dissipation. There are capacitive voltage probes at both ends of the WTL and on the diverter switch. These voltage signals will be analyzed to determine diverter performance. Using this analysis the usefulness of the diverter switch will be evaluated.

G. Corrow, M. Hansen, D. Henderson, C. Mitton et al.

2008-02-01T23:59:59.000Z

40

TJ Automation | Open Energy Information  

Open Energy Info (EERE)

TJ Automation TJ Automation Jump to: navigation, search Name TJ Automation Facility TJ Automation Sector Wind energy Facility Type Small Scale Wind Facility Status In Service Owner TJ Automation Energy Purchaser TJ Automation Location Archbold OH Coordinates 41.45823855°, -84.30666804° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.45823855,"lon":-84.30666804,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Test Automation Ant JUnit Test Automation  

E-Print Network (OSTI)

Test Automation Ant JUnit Test Automation Mohammad Mousavi Eindhoven University of Technology, The Netherlands Software Testing 2012 Mousavi: Test Automation #12;Test Automation Ant JUnit Outline Test Automation Ant JUnit Mousavi: Test Automation #12;Test Automation Ant JUnit Why? Challenges of Manual Testing

Mousavi, Mohammad

42

Definition: Distribution Automation | Open Energy Information  

Open Energy Info (EERE)

Automation Automation Jump to: navigation, search Dictionary.png Distribution Automation DA is a family of technologies including sensors, processors, communication networks, and switches that can perform a number of distribution system functions depending on how they are implemented. Over the last 20 years, utilities have been applying DA to improve reliability, service quality and operational efficiency. More recently, DA is being applied to perform automatic switching, reactive power compensation coordination, or other feeder operations/control.[1] Related Terms sustainability, smart grid References ↑ https://www.smartgrid.gov/category/technology/distribution_automation [[Ca LikeLike UnlikeLike You and one other like this.One person likes this. Sign Up to see what your friends like.

43

Automation i Distributionsnt; Distribution automation.  

E-Print Network (OSTI)

?? As a part of Gteborg Energis work towards a smarter electric grid, the company has chosen to investigate the possibilities of automation in their (more)

Mrd, Mathias

2012-01-01T23:59:59.000Z

44

Highway Electrification And Automation  

E-Print Network (OSTI)

Electrification and Automation Technologies - RegionalHighway Electrification and Automation Steven E. Shladovertechnology of highway automation, as well as its belief

Shladover, Steven E.

1992-01-01T23:59:59.000Z

45

Diamond switches for high temperature electronics  

SciTech Connect

Diamond switches are well suited for use in high temperature electronics. Laboratory feasibility of diamond switching at 1 kV and 18 A was demonstrated. DC blocking voltages up to 1 kV were demonstrated. A 50 {Omega} load line was switched using a diamond switch, with switch on-state resistivity {approx}7 {Omega}-cm. An electron beam, {approx}150 keV energy, {approx}2 {mu}s full width at half maximum was used to control the 5 mm x 5 mm x 100 {mu}m thick diamond switch. The conduction current temporal history mimics that of the electron beam. These data were taken at room temperature.

Prasad, R.R.; Rondeau, G.; Qi, Niansheng [Alameda Applied Sciences Corp., San Leandro, CA (United States)] [and others

1996-04-25T23:59:59.000Z

46

The Integration of On-Line Monitoring and Reconfiguration Functions using EDAA - European design and Automation Association1149.4 Into a Safety Critical Automotive Electronic Control Unit  

E-Print Network (OSTI)

This paper presents an innovative application of EDAA - European design and Automation Association 1149.4 and the Integrated Diagnostic Reconfiguration (IDR) as tools for the implementation of an embedded test solution for an Automotive Electronic Control Unit implemented as a fully integrated mixed signal system. The paper described how the test architecture can be used for fault avoidance with results from a hardware prototype presented. The paper concludes that fault avoidance can be integrated into mixed signal electronic systems to handle key failure modes.

Jeffrey, C; Prosser, S; Lickess, M; Richardson, A; Riches, S

2011-01-01T23:59:59.000Z

47

Radio-Frequency Inverters With Transmission-Line Input Networks  

E-Print Network (OSTI)

A soft-switching inverter topology (the Class Phi ) is presented which draws dc source current through a transmission line or a lumped-network approximation of a distributed line. By aligning the inverter switching frequency ...

Phinney, Joshua W.

48

Automated visual inspection of rolled metal surfaces  

Science Journals Connector (OSTI)

A prototype for an automated visual on-line metal strip inspection system is described. The system is capable of both detecting and classifying surface defects in copper alloy strips, and it has been installed...

Timo Piironen; Olli Silven; Matti Pietikinen

1990-01-01T23:59:59.000Z

49

Latching micro optical switch  

DOE Patents (OSTI)

An optical switch reliably maintains its on or off state even when subjected to environments where the switch is bumped or otherwise moved. In addition, the optical switch maintains its on or off state indefinitely without requiring external power. External power is used only to transition the switch from one state to the other. The optical switch is configured with a fixed optical fiber and a movable optical fiber. The movable optical fiber is guided by various actuators in conjunction with a latching mechanism that configure the switch in one position that corresponds to the on state and in another position that corresponds to the off state.

Garcia, Ernest J; Polosky, Marc A

2013-05-21T23:59:59.000Z

50

A study of an embedded community network system in home automation  

Science Journals Connector (OSTI)

This article proposes an embedded system of home automation in a community network The system includes a home security monitor and a home energy monitor. The home security monitor uses sensors and micro switches ...

Chun-Liang Chen

2010-12-01T23:59:59.000Z

51

Technology modernization assessment flexible automation  

SciTech Connect

The objectives of this report are: to present technology assessment guidelines to be considered in conjunction with defense regulations before an automation project is developed to give examples showing how assessment guidelines may be applied to a current project to present several potential areas where automation might be applied successfully in the depot system. Depots perform primarily repair and remanufacturing operations, with limited small batch manufacturing runs. While certain activities (such as Management Information Systems and warehousing) are directly applicable to either environment, the majority of applications will require combining existing and emerging technologies in different ways, with the special needs of depot remanufacturing environment. Industry generally enjoys the ability to make revisions to its product lines seasonally, followed by batch runs of thousands or more. Depot batch runs are in the tens, at best the hundreds, of parts with a potential for large variation in product mix; reconfiguration may be required on a week-to-week basis. This need for a higher degree of flexibility suggests a higher level of operator interaction, and, in turn, control systems that go beyond the state of the art for less flexible automation and industry in general. This report investigates the benefits and barriers to automation and concludes that, while significant benefits do exist for automation, depots must be prepared to carefully investigate the technical feasibility of each opportunity and the life-cycle costs associated with implementation. Implementation is suggested in two ways: (1) develop an implementation plan for automation technologies based on results of small demonstration automation projects; (2) use phased implementation for both these and later stage automation projects to allow major technical and administrative risk issues to be addressed. 10 refs., 2 figs., 2 tabs. (JF)

Bennett, D.W.; Boyd, D.R.; Hansen, N.H.; Hansen, M.A.; Yount, J.A.

1990-12-01T23:59:59.000Z

52

Remote switch actuator  

DOE Patents (OSTI)

The invention provides a device and method for actuating electrical switches remotely. The device is removably attached to the switch and is actuated through the transfer of a user's force. The user is able to remain physically removed from the switch site obviating need for protective equipment. The device and method allow rapid, safe actuation of high-voltage or high-current carrying electrical switches or circuit breakers.

Haas, Edwin Gerard; Beauman, Ronald; Palo, Jr., Stefan

2013-01-29T23:59:59.000Z

53

Automation Performance Index.  

E-Print Network (OSTI)

??Automation is intended to improve overall building performance. Building Automation Systems (BAS) are attractive and popular due to their promise of increased operational effectiveness. BAS (more)

Makarechi, Shariar

2006-01-01T23:59:59.000Z

54

Views on Automation  

Science Journals Connector (OSTI)

Views on Automation ... Industrial managements, he feels, must allay workers' fears by showing how they can take pride in the greater accomplishment of automated plants. ...

1957-07-29T23:59:59.000Z

55

Design of an automated sorting and orienting machine for electronic pins  

E-Print Network (OSTI)

At the power electronics manufacturer SynQor, the printed circuit board (PCB) assembly line is fully automated with the exception of the step which inserts electronic pins into the PCBs. Past attempts to automate this ...

Chang, Michelle Sueway

2012-01-01T23:59:59.000Z

56

Optically triggered high voltage switch network and method for switching a high voltage  

DOE Patents (OSTI)

An optically triggered solid state switch and method for switching a high voltage electrical current. A plurality of solid state switches (350) are connected in series for controlling electrical current flow between a compensation capacitor (112) and ground in a reactive power compensator (50, 50') that monitors the voltage and current flowing through each of three distribution lines (52a, 52b and 52c), which are supplying three-phase power to one or more inductive loads. An optical transmitter (100) controlled by the reactive power compensation system produces light pulses that are conveyed over optical fibers (102) to a switch driver (110') that includes a plurality of series connected optical triger circuits (288). Each of the optical trigger circuits controls a pair of the solid state switches and includes a plurality of series connected resistors (294, 326, 330, and 334) that equalize or balance the potential across the plurality of trigger circuits. The trigger circuits are connected to one of the distribution lines through a trigger capacitor (340). In each switch driver, the light signals activate a phototransistor (300) so that an electrical current flows from one of the energy reservoir capacitors through a pulse transformer (306) in the trigger circuit, producing gate signals that turn on the pair of serially connected solid state switches (350).

El-Sharkawi, Mohamed A. (Renton, WA); Andexler, George (Everett, WA); Silberkleit, Lee I. (Mountlake Terrace, WA)

1993-01-19T23:59:59.000Z

57

Effective switching frequency multiplier inverter  

DOE Patents (OSTI)

A switching frequency multiplier inverter for low inductance machines that uses parallel connection of switches and each switch is independently controlled according to a pulse width modulation scheme. The effective switching frequency is multiplied by the number of switches connected in parallel while each individual switch operates within its limit of switching frequency. This technique can also be used for other power converters such as DC/DC, AC/DC converters.

Su, Gui-Jia (Oak Ridge, TN); Peng, Fang Z. (Okemos, MI)

2007-08-07T23:59:59.000Z

58

Modular design for increasing assembly automation  

Science Journals Connector (OSTI)

Abstract Modular design can address the need for a high number of product variants and further allow a higher degree of automation in the assembly line. A framework is developed for the simultaneous modular product design and the design of automated manufacturing system. Product designs are optimized for automation using Design Structure Matrix and Modular Function Deployment. Alternative production systems are designed and accessed based on the analysis of assembly steps hierarchically. The implementation of the framework on the design of a production system for furniture assembly, able to handle multiple variants with a large number of components, is demonstrated.

Konstantinos Salonitis

2014-01-01T23:59:59.000Z

59

Thermally actuated thermionic switch  

DOE Patents (OSTI)

A thermally actuated thermionic switch which responds to an increase of temperature by changing from a high impedance to a low impedance at a predictable temperature set point. The switch has a bistable operation mode switching only on temperature increases. The thermionic material may be a metal which is liquid at the desired operation temperature and held in matrix in a graphite block reservoir, and which changes state (ionizes, for example) so as to be electrically conductive at a desired temperature.

Barrus, D.M.; Shires, C.D.

1982-09-30T23:59:59.000Z

60

Solid state switch  

DOE Patents (OSTI)

A solid state switch, with reverse conducting thyristors, is designed to operate at 20 kV hold-off voltage, 1500 A peak, 1.0 .mu.s pulsewidth, and 4500 pps, to replace thyratrons. The solid state switch is more reliable, more economical, and more easily repaired. The switch includes a stack of circuit card assemblies, a magnetic assist and a trigger chassis. Each circuit card assembly contains a reverse conducting thyristor, a resistor capacitor network, and triggering circuitry.

Merritt, Bernard T. (Livermore, CA); Dreifuerst, Gary R. (Livermore, CA)

1994-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Home Automation System; Automation i hemmet.  

E-Print Network (OSTI)

?? This project revolves around creating a home automation system prototype with the main focus being the ability to lock/unlock a door through the internet. (more)

Ruwaida,, Bassam

2013-01-01T23:59:59.000Z

62

Automation of organic elemental analysis  

Science Journals Connector (OSTI)

Automation of organic elemental analysis ... Describes the development and design of an apparatus for automated organic elemental analysis. ...

Velmer B. Fish

1969-01-01T23:59:59.000Z

63

Automation in biological crystallization  

Science Journals Connector (OSTI)

Automation is the response to overcoming the crystallization bottleneck in biological crystallography. This review provides a summary of the current methods and technologies applied in automated platforms for the setup of initial and follow-up crystallization experiments.

Shaw Stewart, P.

2014-05-28T23:59:59.000Z

64

Digital Control for Automation  

Science Journals Connector (OSTI)

GREATER YIELDS OF BETTER QUALITY PRODUCTS at reduced costs: That's one way to look at automations goal. And among instruments for automation are data reduction systems (others: continuous process analyzers, computer elements, and control mechanisms). ...

1956-04-02T23:59:59.000Z

65

AUTOMATION: Hints from OCAW  

Science Journals Connector (OSTI)

AUTOMATION: Hints from OCAW ... Labor and management need more, not less, collective bargaining in automated industries, he told a Houston, Tex., meeting of the Petro Group of the South Texas Section of the American Institute of Chemical Engineers. ...

1969-06-30T23:59:59.000Z

66

Theorie des langages Automates finis  

E-Print Network (OSTI)

Th´eorie des langages Automates finis Elise Bonzon http://web.mi.parisdescartes.fr/ bonzon/ elise.bonzon@parisdescartes.fr 1 / 51 Th´eorie des langages #12;Automates finis Automates finis Introduction Formalisation Repr´erations sur les automates Automates finis et langages 2 / 51 Th´eorie des langages #12;Automates finis

Bonzon, Elise

67

Multiplex automated genome engineering  

DOE Patents (OSTI)

The present invention relates to automated methods of introducing multiple nucleic acid sequences into one or more target cells.

Church, George M; Wang, Harris H; Isaacs, Farren J

2013-10-29T23:59:59.000Z

68

Mirle Automation Corporation | Open Energy Information  

Open Energy Info (EERE)

Mirle Automation Corporation Mirle Automation Corporation Jump to: navigation, search Name Mirle Automation Corporation Place Hsinchu, Taiwan Zip 30077 Sector Solar Product A Taiwan-based automation system integrators and related product manufacturers who have entered thin film solar cell manufacturing equipment business. Coordinates 24.69389°, 121.148064° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":24.69389,"lon":121.148064,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

69

Congress Likes Automation  

Science Journals Connector (OSTI)

Congress Likes Automation ... Industry is generally aware of its responsibilities to worker replaced by automation, Congressional group concludes after broad study ... No NEW LEGISLATION or legislative changes are required to keep pace with the impact of automation on the national economy, concludes Rep. Wright Patman (D.-Tex.). ...

1955-11-07T23:59:59.000Z

70

Automated Addition of Fault-Tolerance to SCR Toolset: A case study1 Fuad Abu-Jarad Sandeep S. Kulkarni  

E-Print Network (OSTI)

1/10 Automated Addition of Fault-Tolerance to SCR Toolset: A case study1 Fuad Abu-Jarad Sandeep S-tolerance to the SCR tools. We illustrate our approach using two case studies: an altitude switch controller and an automobile cruise controller. Keywords: SCR tools, Automated addition of fault-tolerance, Event

Kulkarni, Sandeep

71

Photoconductive switch package  

DOE Patents (OSTI)

A photoconductive switch is formed of a substrate that has a central portion of SiC or other photoconductive material and an outer portion of cvd-diamond or other suitable material surrounding the central portion. Conducting electrodes are formed on opposed sides of the substrate, with the electrodes extending beyond the central portion and the edges of the electrodes lying over the outer portion. Thus any high electric fields produced at the edges of the electrodes lie outside of and do not affect the central portion, which is the active switching element. Light is transmitted through the outer portion to the central portion to actuate the switch.

Ca[rasp, George J

2013-10-22T23:59:59.000Z

72

Solid state switch  

DOE Patents (OSTI)

A solid state switch, with reverse conducting thyristors, is designed to operate at 20 kV hold-off voltage, 1,500 A peak, 1.0 [mu]s pulsewidth, and 4,500 pps, to replace thyratrons. The solid state switch is more reliable, more economical, and more easily repaired. The switch includes a stack of circuit card assemblies, a magnetic assist and a trigger chassis. Each circuit card assembly contains a reverse conducting thyristor, a resistor capacitor network, and triggering circuitry. 6 figs.

Merritt, B.T.; Dreifuerst, G.R.

1994-07-19T23:59:59.000Z

73

Design, Simulation, and Analysis of Substation Automation Networks  

E-Print Network (OSTI)

on the Substation Automation Systems (SAS). Substations are nodes in the smart grid infrastructure that help the in transportation of power by connecting the transmission and distribution lines. The SAS applications are con figured to operate with minimal human...

Kembanur Natarajan, Elangovan

2012-07-16T23:59:59.000Z

74

Joint Genome Institute's Automation Approach and History  

E-Print Network (OSTI)

Joint Genome Institutes Automation Approach and Historythroughput environment; automation does not necessarilyissues Islands of Automation modular instruments with

Roberts, Simon

2006-01-01T23:59:59.000Z

75

Plasmonic enhanced ultrafast switch.  

SciTech Connect

Ultrafast electronic switches fabricated from defective material have been used for several decades in order to produce picosecond electrical transients and TeraHertz radiation. Due to the ultrashort recombination time in the photoconductor materials used, these switches are inefficient and are ultimately limited by the amount of optical power that can be applied to the switch before self-destruction. The goal of this work is to create ultrafast (sub-picosecond response) photoconductive switches on GaAs that are enhanced through plasmonic coupling structures. Here, the plasmonic coupler primarily plays the role of being a radiation condenser which will cause carriers to be generated adjacent to metallic electrodes where they can more efficiently be collected.

Subramania,Ganapathi Subramanian; Reno, John Louis; Passmore, Brandon Scott; Harris, Tom.; Shaner, Eric Arthur; Barrick, Todd A.

2009-09-01T23:59:59.000Z

76

An optical switch  

DOE Patents (OSTI)

The invention is a gas mixture for a diffuse discharge switch having an electron attaching gas wherein electron attachment is brought about by indirect excitation of molecules to long live states by exposure to laser light. 3 figs.

Christophorou, L.G.; Hunter, S.R.

1987-04-30T23:59:59.000Z

77

Process Development Automation:? An Evolutionary Approach  

Science Journals Connector (OSTI)

Process Development Automation:? An Evolutionary Approach ... In contrast, standard laboratory equipment already contains some automated capabilities but is normally unused in our automation strategies. ... What Can Be Automated? ...

Mike Pollard

2001-04-27T23:59:59.000Z

78

A radiation hard vacuum switch  

DOE Patents (OSTI)

A vacuum switch with an isolated trigger probe which is not directly connected to the switching electrodes. The vacuum switch within the plasmatron is triggered by plasma expansion initiated by the trigger probe which travels through an opening to reach the vacuum switch elements. The plasma arc created is directed by the opening to the space between the anode and cathode of the vacuum switch to cause conduction. 3 figs.

Boettcher, G.E.

1988-07-19T23:59:59.000Z

79

An Automation System for Optimizing a Supply Chain Network Design under the Influence of Demand Uncertainty  

E-Print Network (OSTI)

Automation . . . . . . . . . . . . . . . . . . . . . . iii 3Automation . . . . . . . . . . . . . . . . . . . . . . 5Dashboard/Cockpit Automation . . . . . . . . . . . . .

Polany, Rany

2012-01-01T23:59:59.000Z

80

CIMplementation: Evaluating Manufacturing Automation  

E-Print Network (OSTI)

in the manufacturing organization if CIMplementation~* is to succeed. 1.0 INTRODUCTION There is much discussion today about Com puter Integrated Manufacturing (CIM). Automation tools like Computer Aided Design (CAD) systems, robots, automated material handling...~ Pressing the frontier of technology in one's own manufactur ing facility will not be without its pitfalls. Second, while automation engineers may be able to piece together the technological pieces of a CIM system, they cannot and do not evaluate...

Krakauer, J.

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Switching power pulse system  

DOE Patents (OSTI)

A switching system for delivering pulses of power from a source to a load using a storage capacitor charged through a rectifier, and maintained charged to a reference voltage level by a transistor switch and voltage comparator. A thyristor is triggered to discharge the storage capacitor through a saturable reactor and fractional turn saturable transformer having a secondary to primary turn ratio N of n:l/n = n[sup 2]. The saturable reactor functions as a soaker'' while the thyristor reaches saturation, and then switches to a low impedance state. The saturable transformer functions as a switching transformer with high impedance while a load coupling capacitor charges, and then switches to a low impedance state to dump the charge of the storage capacitor into the load through the coupling capacitor. The transformer is comprised of a multilayer core having two secondary windings tightly wound and connected in parallel to add their output voltage and reduce output inductance, and a number of single turn windings connected in parallel at nodes for the primary winding, each single turn winding linking a different one of the layers of the multilayer core. The load may be comprised of a resistive beampipe for a linear particle accelerator and capacitance of a pulse forming network. To hold off discharge of the capacitance until it is fully charged, a saturable core is provided around the resistive beampipe to isolate the beampipe from the capacitance until it is fully charged. 5 figs.

Aaland, K.

1983-08-09T23:59:59.000Z

82

IPv6 Home Automation.  

E-Print Network (OSTI)

?? Home automation is the systematic controlling and monitoring of everyday home devices such as lighting, heating, window blinds and appliances (both white goods and (more)

Hdn, Thor

2009-01-01T23:59:59.000Z

83

Home Automation Using Elvin.  

E-Print Network (OSTI)

?? Home automation systems of today tend to be external solutions to an existing product that enable rather complex and expensive communications equipment to be (more)

Malm, Anders

2005-01-01T23:59:59.000Z

84

Vehicle highway automation.  

E-Print Network (OSTI)

??Vehicle Highway Automation has been studied for several years but a practical system has not been possible because of technology limitations. New advances in sensing (more)

Challa, Dinesh Kumar

2009-01-01T23:59:59.000Z

85

Convection automated logic oven control  

SciTech Connect

For the past few years, there has been a greater push to bring more automation to the cooling process. There have been attempts at automated cooking using a wide range of sensors and procedures, but with limited success. The authors have the answer to the automated cooking process; this patented technology is called Convection AutoLogic (CAL). The beauty of the technology is that it requires no extra hardware for the existing oven system. They use the existing temperature probe, whether it is an RTD, thermocouple, or thermistor. This means that the manufacturer does not have to be burdened with extra costs associated with automated cooking in comparison to standard ovens. The only change to the oven is the program in the central processing unit (CPU) on the board. As for its operation, when the user places the food into the oven, he or she is required to select a category (e.g., beef, poultry, or casseroles) and then simply press the start button. The CAL program then begins its cooking program. It first looks at the ambient oven temperature to see if it is a cold, warm, or hot start. CAL stores this data and then begins to look at the food`s thermal footprint. After CAL has properly detected this thermal footprint, it can calculate the time and temperature at which the food needs to be cooked. CAL then sets up these factors for the cooking stage of the program and, when the food has finished cooking, the oven is turned off automatically. The total time for this entire process is the same as the standard cooking time the user would normally set. The CAL program can also compensate for varying line voltages and detect when the oven door is opened. With all of these varying factors being monitored, CAL can produce a perfectly cooked item with minimal user input.

Boyer, M.A.; Eke, K.I. [Apollo U.S.A. Inc., Orlando, FL (United States)] [Apollo U.S.A. Inc., Orlando, FL (United States)

1998-03-01T23:59:59.000Z

86

Microfabricated triggered vacuum switch  

DOE Patents (OSTI)

A microfabricated vacuum switch is disclosed which includes a substrate upon which an anode, cathode and trigger electrode are located. A cover is sealed over the substrate under vacuum to complete the vacuum switch. In some embodiments of the present invention, a metal cover can be used in place of the trigger electrode on the substrate. Materials used for the vacuum switch are compatible with high vacuum, relatively high temperature processing. These materials include molybdenum, niobium, copper, tungsten, aluminum and alloys thereof for the anode and cathode. Carbon in the form of graphitic carbon, a diamond-like material, or carbon nanotubes can be used in the trigger electrode. Channels can be optionally formed in the substrate to mitigate against surface breakdown.

Roesler, Alexander W. (Tijeras, NM); Schare, Joshua M. (Albuquerque, NM); Bunch, Kyle (Albuquerque, NM)

2010-05-11T23:59:59.000Z

87

Switching power supply  

DOE Patents (OSTI)

The invention is a repratable capacitor charging, switching power supply. A ferrite transformer steps up a dc input. The transformer primary is in a full bridge configuration utilizing power MOSFETs as the bridge switches. The transformer secondary is fed into a high voltage, full wave rectifier whose output is connected directly to the energy storage capacitor. The transformer is designed to provide adequate leakage inductance to limit capacitor current. The MOSFETs are switched to the variable frequency from 20 to 50 kHz to charge a capacitor from 0.6 kV. The peak current in a transformer primary and secondary is controlled by increasing the pulse width as the capacitor charges. A digital ripple counter counts pulses and after a preselected desired number is reached an up-counter is clocked.

Mihalka, A.M.

1984-06-05T23:59:59.000Z

88

Laboratory automation-A case history  

Science Journals Connector (OSTI)

Laboratory automation-A case history ... This article describes an automated Raman spectrometer. ...

Bernard J. Bulkin; Edward H. Cole; Arthur Noguerola

1974-01-01T23:59:59.000Z

89

Automated Demand Response and Commissioning  

E-Print Network (OSTI)

Fully-Automated Demand Response Test in Large Facilities14in DR systems. Demand Response using HVAC in Commercialof Fully Automated Demand Response in Large Facilities

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Bourassa, Norman

2005-01-01T23:59:59.000Z

90

Autonomic Product Development Process Automation.  

E-Print Network (OSTI)

??Market globalization and mass customization requirements are forcing companies towards automation of their product development processes. Many task-specific software solutions provide localized automation. Coordinating these (more)

Daley, John E.

2007-01-01T23:59:59.000Z

91

Automation Creates New Managers  

Science Journals Connector (OSTI)

AUTOMATION will bring about new and broader patterns in the use of labor and creation of a large group of managers of a new type, says E. W. Engstrom, senior executive vice president of the Radio Corporation of America. With automation, there will no ...

1955-12-12T23:59:59.000Z

92

AIS Automation Dresden | Open Energy Information  

Open Energy Info (EERE)

AIS Automation Dresden AIS Automation Dresden Jump to: navigation, search Name AIS Automation Dresden Place Dresden, Germany Zip D-01237 Product Provides software for industrial process control for the semiconductor and photovoltaic industries. Coordinates 51.053645°, 13.740815° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":51.053645,"lon":13.740815,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

93

Switching power pulse system  

DOE Patents (OSTI)

A switching system for delivering pulses of power from a source (10) to a load (20) using a storage capacitor (C3) charged through a rectifier (D1, D2), and maintained charged to a reference voltage level by a transistor switch (Q1) and voltage comparator (12). A thyristor (22) is triggered to discharge the storage capacitor through a saturable reactor (18) and fractional turn saturable transformer (16) having a secondary to primary turn ratio N of n:l/n=n.sup.2. The saturable reactor (18) functions as a "soaker" while the thyristor reaches saturation, and then switches to a low impedance state. The saturable transformer functions as a switching transformer with high impedance while a load coupling capacitor (C4) charges, and then switches to a low impedance state to dump the charge of the storage capacitor (C3) into the load through the coupling capacitor (C4). The transformer is comprised of a multilayer core (26) having two secondary windings (28, 30) tightly wound and connected in parallel to add their output voltage and reduce output inductance, and a number of single turn windings connected in parallel at nodes (32, 34) for the primary winding, each single turn winding linking a different one of the layers of the multilayer core. The load may be comprised of a resistive beampipe (40) for a linear particle accelerator and capacitance of a pulse forming network (42). To hold off discharge of the capacitance until it is fully charged, a saturable core (44) is provided around the resistive beampipe (40) to isolate the beampipe from the capacitance (42) until it is fully charged.

Aaland, Kristian (Livermore, CA)

1983-01-01T23:59:59.000Z

94

Cognitive Engineering Automation and Human  

E-Print Network (OSTI)

· Home automation · Robotics · Unmanned vehicles (UAVs and UGVs) · Drug design/Molecular geneticsCognitive Engineering PSYC 530 Automation and Human Performance Raja Parasuraman #12;Overview Automation-Related Accidents Levels and Stages of Automation Information Acquisition and Analysis Decision

Parasuraman, Raja

95

Automation of Feynman Diagram Evaluation  

E-Print Network (OSTI)

A C-program DIANA (DIagram ANAlyser) for the automation of Feynman diagram evaluations is presented.

M. Tentyukov; J. Fleischer

1998-02-04T23:59:59.000Z

96

Microsoft Word - CX-Hat_Rock_Switch_14June2013  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7, 2013 7, 2013 REPLY TO ATTN OF: KEC-4 SUBJECT: Environmental Clearance Memorandum Glenn Russell Project Manager -TPCV-TPP-4 Proposed Action: Hat Rock Switching Station Replacement Project Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B4.6 Additions and modifications to transmission facilities Location: Umatilla County, Oregon Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: BPA proposes to fund PacifiCorp's rebuild of BPA's Hat Rock Tap Switching Station, which is located within PacifiCorp's McNary-Wallula 230-kilovolt (kV) transmission line right-of-way (ROW). Rebuilding the switching station would include the replacement of sectionalizing switches, the grounding grid, and all signage. The approximately 0.5-acre yard would

97

CREE: Making the Switch  

SciTech Connect

CREE, with the help of ARPA-E funding, has developed a Silicon Carbide (SIC) transistor which can be used to create solid state transformers capable of meeting the unique needs of the emerging smart grid. SIC transistors are different from common silicon computer chips in that they handle grid scale voltages with ease and their high frequency switching is well suited to the intermittent nature of renewable energy generation.

Grider, David; Palmer, John

2014-03-06T23:59:59.000Z

98

Shielded cells transfer automation  

SciTech Connect

Nuclear waste from shielded cells is removed, packaged, and transferred manually in many nuclear facilities. Radiation exposure is absorbed by operators during these operations and limited only through procedural controls. Technological advances in automation using robotics have allowed a production waste removal operation to be automated to reduce radiation exposure. The robotic system bags waste containers out of glove box and transfers them to a shielded container. Operators control the system outside the system work area via television cameras. 9 figures.

Fisher, J J

1984-01-01T23:59:59.000Z

99

Automated Lattice Perturbation Theory  

SciTech Connect

I review recent developments in automated lattice perturbation theory. Starting with an overview of lattice perturbation theory, I focus on the three automation packages currently "on the market": HiPPy/HPsrc, Pastor and PhySyCAl. I highlight some recent applications of these methods, particularly in B physics. In the final section I briefly discuss the related, but distinct, approach of numerical stochastic perturbation theory.

Monahan, Christopher

2014-11-01T23:59:59.000Z

100

Abstract--Implementation of Distribution Automation (DA) and Demand Side Management (DSM) intended to serve both  

E-Print Network (OSTI)

Abstract--Implementation of Distribution Automation (DA) and Demand Side Management (DSM) intended, requires a wide-area two-way communication system. DA and DSM devices (customer meters, switches, etc for both DA/DSM applications can be met. And a scheduling policy is proposed to provide the applications

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Home Network Technologies and Automating Demand Response  

E-Print Network (OSTI)

potential role of home automation networks in implementinghow existing and future home automation systems may providehome networks" and "home automation" are frequently used

McParland, Charles

2010-01-01T23:59:59.000Z

102

Development of Building Automation and Control Systems  

E-Print Network (OSTI)

A design flow for building automation and control systems,Development of Building Automation and Control Systems Yangdesign of the build- ing automation system (including the

Yang, Yang; Zhu, Qi; Maasoumy, Mehdi; Sangiovanni-Vincentelli, Alberto

2012-01-01T23:59:59.000Z

103

Automated macromolecular crystal detection system and method  

DOE Patents (OSTI)

An automated macromolecular method and system for detecting crystals in two-dimensional images, such as light microscopy images obtained from an array of crystallization screens. Edges are detected from the images by identifying local maxima of a phase congruency-based function associated with each image. The detected edges are segmented into discrete line segments, which are subsequently geometrically evaluated with respect to each other to identify any crystal-like qualities such as, for example, parallel lines, facing each other, similarity in length, and relative proximity. And from the evaluation a determination is made as to whether crystals are present in each image.

Christian, Allen T. (Tracy, CA); Segelke, Brent (San Ramon, CA); Rupp, Bernard (Livermore, CA); Toppani, Dominique (Fontainebleau, FR)

2007-06-05T23:59:59.000Z

104

Hybrid switch for resonant power converters  

DOE Patents (OSTI)

A hybrid switch comprising two semiconductor switches connected in parallel but having different voltage drop characteristics as a function of current facilitates attainment of zero voltage switching and reduces conduction losses to complement reduction of switching losses achieved through zero voltage switching in power converters such as high-current inverters.

Lai, Jih-Sheng; Yu, Wensong

2014-09-09T23:59:59.000Z

105

Honeywell Modular Automation System Acceptance Test Procedure  

SciTech Connect

The purpose of this Acceptance Test Procedure (ATP) is to verify the operability of the three new furnaces as controlled by the new Honeywell Modular Automation System (MAS). The Honeywell MAS is being installed in PFP to control the three thermal stabilization furnaces in glovebox HA-211. The ATP provides instructions for testing the configuration of the Honeywell MAS at the Plutonium Finishing Plant(PFP). The test will be a field test of the analog inputs, analog outputs, and software interlocks. The interlock test will check the digital input and outputs. Field equipment will not be connected forth is test. Simulated signals will be used to test thermocouple, limit switch, and vacuum pump inputs to the PLUMAS.

STUBBS, A.M.

1999-09-21T23:59:59.000Z

106

Honeywell Demonstrates Automated Demand Response Benefits for...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Honeywell Demonstrates Automated Demand Response Benefits for Utility, Commercial, and Industrial Customers Honeywell Demonstrates Automated Demand Response Benefits for Utility,...

107

AUTOMATED CRITICAL PEAK PRICING FIELD TESTS  

E-Print Network (OSTI)

AUTOMATED CRITICAL PEAK PRICING FIELD TESTS: 2006 PROGRAM DESCRIPTION AND RESULTS APPENDICES.................................................................................... 5 B.2. DR Automation Server User Guide

108

Development of Building Automation and Control Systems  

E-Print Network (OSTI)

Johnson Controls, 70 in Automated Logic EIKON language, 42systems developed by Automated Logic. Similarly as shown in

Yang, Yang; Zhu, Qi; Maasoumy, Mehdi; Sangiovanni-Vincentelli, Alberto

2012-01-01T23:59:59.000Z

109

HIGHLY AUTOMATED MACROMOLECULAR  

NLE Websites -- All DOE Office Websites (Extended Search)

AUTOMATED MACROMOLECULAR AUTOMATED MACROMOLECULAR CRYSTALLOGRAPHY BEAMLINE (AMX) Group Leader: Dieter Schneider Proposal Team: M. Allaire 1 , L. Berman 1 , M. Chance 2 , W. Hendrickson 3 , A. Héroux 1 , J. Jakoncic 1 , A. Orville 1 , H. Robinson 1 , D. Schneider 1 , W. Shi 2 , A. Soares 1 , V. Stojanoff 1 , R. Sweet 1 1 Brookhaven National Laboratory, 2 Case Western Reserve University, 3 Columbia University MISSION APPLICATIONS AND CAPABILITIES ADDITIONAL INFORMATION * AMX at NSLS-II will provide structural biologists with ready access to an advanced macromolecular crystallography (MX) beamline for the elucidation of structure and function of macromolecular complexes. * Its high flux, tunable energy, and natively small focal spot will make it a crystallographer's preferred beamline. * Its high degree of automation will provide a high throughput

110

Exponential asymptotics and Stokes lines in a partial differential equation  

Science Journals Connector (OSTI)

...higher-order Stokes line. exponential asymptotics|Stokes lines|Stokes smoothing|Borel plane...and subdominant exponentials may be identified...this expansion and smoothing the Stokes lines...performed the Stokes smoothing and identified...Stokes lines and the exponentials they switch on...

2005-01-01T23:59:59.000Z

111

Automation Status | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Automation Status Automation Status Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011. mfg2011plenarysperrick.pdf More...

112

Automation on the laboratory bench  

Science Journals Connector (OSTI)

Automation on the laboratory bench ... In designing an automation kit the authors attempted to give chemistry a system which is versatile and easy to apply in taking over the boring and difficult task of controlling parameters manually. ...

M. Legrand; A. Foucard

1978-01-01T23:59:59.000Z

113

Switching Surges and Air Insulation  

Science Journals Connector (OSTI)

...research-article Switching Surges and Air Insulation B. Jones Some thirteen years ago...reduction was noticed in the strength of air insulation when subjected to slowly rising positive...collected in high voltage laboratories. Insulation against switching surges is now seen...

1973-01-01T23:59:59.000Z

114

Audio Switch SpeakersAvotec  

E-Print Network (OSTI)

Control Monitor Keyboard & Mouse Audio Switch Control SpeakersAvotec USB HUB USB HUB USB CAT5FORP USB Ext Stim PC Stim Mac Laptop Audio RCA RCA USB CAT5 FORPUSB Ext Video K&M Video Video Speakers Avotec Projector Video Switch VGA RCA RCA 3T Audio and Visual Stimulus Setup DVD Drive K&MSiemens RCA

Walker, Matthew P.

115

Using Markov Logic Network for On-line Activity Recognition from Non-Visual Home  

E-Print Network (OSTI)

Using Markov Logic Network for On-line Activity Recognition from Non-Visual Home Automation Sensors automation equipments coexist. This research is linked to the Sweet-Home project which aims at developing and dissemination of assistive technology would be more efficient if it is built on standard home automation

Paris-Sud XI, Université de

116

Power Consumption of Hybrid Optical Switches  

Science Journals Connector (OSTI)

Two realization options of hybrid optical switches are evaluated with regard to power consumption. Both switches show improved energy efficiency in comparison to a pure packet...

Aleksic, Slavi?a

117

Silicon Photonics for Modulation, Switching, and Tuning  

Science Journals Connector (OSTI)

Thermal and electro-refractive silicon photonic modulators, switches, and tunable filters have been demonstrated with ultralow switching energies and high-speed operation. These...

Watts, Michael

118

Nanometer Resolution Imaging by SIngle Molecule Switching. |...  

NLE Websites -- All DOE Office Websites (Extended Search)

Nanometer Resolution Imaging by SIngle Molecule Switching. Nanometer Resolution Imaging by SIngle Molecule Switching. Abstract: The fluorescence intensity of single molecules can...

119

Optimized scalable network switch  

DOE Patents (OSTI)

In a massively parallel computing system having a plurality of nodes configured in m multi-dimensions, each node including a computing device, a method for routing packets towards their destination nodes is provided which includes generating at least one of a 2m plurality of compact bit vectors containing information derived from downstream nodes. A multilevel arbitration process in which downstream information stored in the compact vectors, such as link status information and fullness of downstream buffers, is used to determine a preferred direction and virtual channel for packet transmission. Preferred direction ranges are encoded and virtual channels are selected by examining the plurality of compact bit vectors. This dynamic routing method eliminates the necessity of routing tables, thus enhancing scalability of the switch.

Blumrich, Matthias A. (Ridgefield, CT); Chen, Dong (Croton On Hudson, NY); Coteus, Paul W. (Yorktown Heights, NY); Gara, Alan G. (Mount Kisco, NY); Giampapa, Mark E. (Irvington, NY); Heidelberger, Philip (Cortlandt Manor, NY); Steinmacher-Burow, Burkhard D. (Mount Kisco, NY); Takken, Todd E. (Mount Kisco, NY); Vranas, Pavlos M. (Bedford Hills, NY)

2007-12-04T23:59:59.000Z

120

Optimized scalable network switch  

DOE Patents (OSTI)

In a massively parallel computing system having a plurality of nodes configured in m multi-dimensions, each node including a computing device, a method for routing packets towards their destination nodes is provided which includes generating at least one of a 2m plurality of compact bit vectors containing information derived from downstream nodes. A multilevel arbitration process in which downstream information stored in the compact vectors, such as link status information and fullness of downstream buffers, is used to determine a preferred direction and virtual channel for packet transmission. Preferred direction ranges are encoded and virtual channels are selected by examining the plurality of compact bit vectors. This dynamic routing method eliminates the necessity of routing tables, thus enhancing scalability of the switch.

Blumrich, Matthias A. (Ridgefield, CT); Chen, Dong (Croton on Hudson, NY); Coteus, Paul W. (Yorktown Heights, NY)

2010-02-23T23:59:59.000Z

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Automation: Congress' Next Probe  

Science Journals Connector (OSTI)

THE stage is being set for a Congressional investigation of the trend toward automation in industry. From all indications, this could become one of the hottest subjects in labor-management relations during the coming year.Formal hearings have been ...

1955-08-29T23:59:59.000Z

122

Microsoft Word - CX-MountainAvenueSwitchesFY12_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Joan Kendall Realty Specialist - TERR-3 Proposed Action: Disposition of Mountain Avenue Tap Line Sectionalizing Switches Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): Appendix B1.24 Property transfers Location: Jackson County, Oregon Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: BPA is proposing to transfer ownership of two line sectionalizing switches to PacifiCorp. The switches, 2R247 and 2R248, are located on PacifiCorp's Oak Knoll-Ashland 115-kV transmission line at the tap point for the Mountain Avenue Tap. Ownership of these switches will provide PacifiCorp more control over future

123

Automation of Capacity Bidding with an Aggregator Using Open Automated Demand Response  

E-Print Network (OSTI)

ProtocolforBuildingAutomationandControl Networks. ProtocolforBuildingAutomationandControl Networks,DemandResponseAutomationServer DemandResponseResearch

Kiliccote, Sila

2011-01-01T23:59:59.000Z

124

Development of control system to automate the PCB pin insertion process  

E-Print Network (OSTI)

This thesis describes the development of the control system that runs the automated pin insertion machine in a surface mount technology assembly line. The control system is divided into 2 subsystems viz. pin sorting and ...

Isaac, Rejin

2012-01-01T23:59:59.000Z

125

Aescusoft GmbH Automation | Open Energy Information  

Open Energy Info (EERE)

Aescusoft GmbH Automation Aescusoft GmbH Automation Jump to: navigation, search Name Aescusoft GmbH Automation Place Ettenheim, Germany Zip 77955 Product Offers PV cell testing lines. Coordinates 48.256309°, 7.813654° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.256309,"lon":7.813654,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

126

Pulse shaping with transmission lines  

DOE Patents (OSTI)

A method and apparatus for forming shaped voltage pulses uses passive reflection from a transmission line with nonuniform impedance. The impedance of the reflecting line varies with length in accordance with the desired pulse shape. A high voltage input pulse is transmitted to the reflecting line. A reflected pulse is produced having the desired shape and is transmitted by pulse removal means to a load. Light activated photoconductive switches made of silicon can be utilized. The pulse shaper can be used to drive a Pockels cell to produce shaped optical pulses.

Wilcox, Russell B. (Oakland, CA)

1987-01-01T23:59:59.000Z

127

Unsplit bipolar pulse forming line  

DOE Patents (OSTI)

A bipolar pulse forming transmission line module and system for linear induction accelerators having first, second, third, and fourth planar conductors which form a sequentially arranged interleaved stack having opposing first and second ends, with dielectric layers between the conductors. The first and second planar conductors are connected to each other at the first end, and the first and fourth planar conductors are connected to each other at the second end via a shorting plate. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short at the first end a high voltage from the third planar conductor to the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

Rhodes, Mark A. (Pleasanton, CA)

2011-05-24T23:59:59.000Z

128

Optical Packet Switching -1 Optical Networks  

E-Print Network (OSTI)

Optical Packet Switching - 1 Optical Networks: from fiber transmission to photonic switching Optical Packet Switching Fabio Neri and Marco Mellia TLC Networks Group ­ Electronics Department e.mellia@polito.it ­ tel. 011 564 4173 #12;Optical Packet Switching - 2 · This work is licensed under the Creative Commons

Mellia, Marco

129

Bipolar pulse forming line  

DOE Patents (OSTI)

A bipolar pulse forming transmission line module for linear induction accelerators having first, second, third, fourth, and fifth planar conductors which form an interleaved stack with dielectric layers between the conductors. Each conductor has a first end, and a second end adjacent an acceleration axis. The first and second planar conductors are connected to each other at the second ends, the fourth and fifth planar conductors are connected to each other at the second ends, and the first and fifth planar conductors are connected to each other at the first ends via a shorting plate adjacent the first ends. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short a high voltage from the first end of the third planar conductor to the first end of the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

Rhodes, Mark A. (Pleasanton, CA)

2008-10-21T23:59:59.000Z

130

Wide Bandgap Extrinsic Photoconductive Switches  

SciTech Connect

Photoconductive semiconductor switches (PCSS) have been investigated since the late 1970s. Some devices have been developed that withstand tens of kilovolts and others that switch hundreds of amperes. However, no single device has been developed that can reliably withstand both high voltage and switch high current. Yet, photoconductive switches still hold the promise of reliable high voltage and high current operation with subnanosecond risetimes. Particularly since good quality, bulk, single crystal, wide bandgap semiconductor materials have recently become available. In this chapter we will review the basic operation of PCSS devices, status of PCSS devices and properties of the wide bandgap semiconductors 4H-SiC, 6H-SiC and 2H-GaN.

Sullivan, J S

2012-01-17T23:59:59.000Z

131

Regenerative switching CMOS system  

DOE Patents (OSTI)

Complementary Metal Oxide Semiconductor (CMOS) Schottky barrier Field Effect Transistor systems, which are a series combination of N and P-Channel MOSFETS, in which Source Schottky barrier junctions of the N and P-Channel Schottky barrier MOSFETS are electrically interconnected, (rather than the Drains as in conventional diffused junction CMOS), which Schottky barrier MOSFET system demonstrates Regenerative Inverting Switching Characteristics in use are disclosed. Both the N and P-Channel Schottky barrier MOSFET devices are unique in that they provide operational Drain Current vs. Drain to Source voltage as a function of Gate voltage only where the polarities of the Drain voltage and Gate voltage are opposite, referenced to the Source as a common terminal, and where the polarity of the voltage applied to the Gate is appropriate to cause Channel inversion. Experimentally derived results which demonstrate and verify the operation of N and P-Channel Schottky barrier MOSFETS actually fabricated on P and N-type Silicon respectively, by a common procedure using vacuum deposited Chromium as a Schottky barrier forming metal, are also provided. 14 figs.

Welch, J.D.

1998-06-02T23:59:59.000Z

132

Automated gas chromatography  

DOE Patents (OSTI)

An apparatus and process for the continuous, near real-time monitoring of low-level concentrations of organic compounds in a liquid, and, more particularly, a water stream. A small liquid volume of flow from a liquid process stream containing organic compounds is diverted by an automated process to a heated vaporization capillary where the liquid volume is vaporized to a gas that flows to an automated gas chromatograph separation column to chromatographically separate the organic compounds. Organic compounds are detected and the information transmitted to a control system for use in process control. Concentrations of organic compounds less than one part per million are detected in less than one minute. 7 figs.

Mowry, C.D.; Blair, D.S.; Rodacy, P.J.; Reber, S.D.

1999-07-13T23:59:59.000Z

133

Automated Job Hazards Analysis  

Energy.gov (U.S. Department of Energy (DOE))

AJHA Program - The Automated Job Hazard Analysis (AJHA) computer program is part of an enhanced work planning process employed at the Department of Energy's Hanford worksite. The AJHA system is routinely used to performed evaluations for medium and high risk work, and in the development of corrective maintenance work packages at the site. The tool is designed to ensure that workers are fully involved in identifying the hazards, requirements, and controls associated with tasks.

134

Coiled transmission line pulse generators  

DOE Patents (OSTI)

Methods and apparatus are provided for fabricating and constructing solid dielectric "Coiled Transmission Line" pulse generators in radial or axial coiled geometries. The pour and cure fabrication process enables a wide variety of geometries and form factors. The volume between the conductors is filled with liquid blends of monomers, polymers, oligomers, and/or cross-linkers and dielectric powders; and then cured to form high field strength and high dielectric constant solid dielectric transmission lines that intrinsically produce ideal rectangular high voltage pulses when charged and switched into matched impedance loads. Voltage levels may be increased by Marx and/or Blumlein principles incorporating spark gap or, preferentially, solid state switches (such as optically triggered thyristors) which produce reliable, high repetition rate operation. Moreover, these Marxed pulse generators can be DC charged and do not require additional pulse forming circuitry, pulse forming lines, transformers, or an a high voltage spark gap output switch. The apparatus accommodates a wide range of voltages, impedances, pulse durations, pulse repetition rates, and duty cycles. The resulting mobile or flight platform friendly cylindrical geometric configuration is much more compact, light-weight, and robust than conventional linear geometries, or pulse generators constructed from conventional components. Installing additional circuitry may accommodate optional pulse shape improvements. The Coiled Transmission Lines can also be connected in parallel to decrease the impedance, or in series to increase the pulse length.

McDonald, Kenneth Fox (Columbia, MO)

2010-11-09T23:59:59.000Z

135

Energy Automation Systems Inc | Open Energy Information  

Open Energy Info (EERE)

Energy Automation Systems Inc Energy Automation Systems Inc Jump to: navigation, search Name Energy Automation Systems Inc. Place Hendersonville, Tennessee Zip 37075 Sector Buildings, Efficiency Product An energy efficiency consultancy firm focusing on analysis of energy consumption in buildings and providing improvments in the efficiency of the distribution system and equipment loads, similar to an ESCO. Coordinates 36.304861°, -86.620214° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":36.304861,"lon":-86.620214,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

136

Implementation of a fiber-optic delay-line memory  

Science Journals Connector (OSTI)

The construction and operation of a 50-MHz 64 16 bit fiber-optic bit-serial delay-line memory is described. It consists of LiNbO3 directional coupler switches, fused-fiber...

Soukup, T J; Feuerstein, R J; Heuring, V P

1992-01-01T23:59:59.000Z

137

Report blasts Patent Office automation  

Science Journals Connector (OSTI)

Report blasts Patent Office automation ... The Department of Commerce is moving quickly to implement a report highly critical of the Patent & Trademark Office's efforts to fully automate its patent search and retrieval operations. ... An Industry Review Panel found that the current automated patent system is over-designed and as a result needs a redundant communications network and redundant storage of all patent images at high resolution. ...

JANICE LONG

1988-05-30T23:59:59.000Z

138

Using Transmission Lines for Global On-Chip Communication  

E-Print Network (OSTI)

1 Using Transmission Lines for Global On-Chip Communication Aaron Carpenter, Jianyun Hu, Jie Xu-switched network-on-chip a less attractive option. An alternative solution uses well-engineered transmission lines as communication links. These transmission lines, along with simple, practical circuits using modern CMOS technol

Huang, Michael C.

139

Virtual Machine in Automation Projects.  

E-Print Network (OSTI)

?? Virtual machine, as an engineering tool, has recently been introduced into automation projects in Tetra Pak Processing System AB. The goal of this paper (more)

Xing, Xiaoyuan

2010-01-01T23:59:59.000Z

140

Line Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

(PDCI) Upgrade Project Whistling Ridge Energy Project Line Rebuild, Relocation and Substation Projects Wind Projects Line Projects BPA identifies critical infrastructure and...

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

AUTOMATED ~.JELDING -RESEARCH NEEDS T. H. Eagar  

E-Print Network (OSTI)

) ) ..... . '. AUTOMATED ~.JELDING - RESEARCH NEEDS T. H. Eagar Department of Naterials Science and Engineering Nassachusetts Institute of Technology Cambridge, Hassachusetts 02139 Increased use of automated is necessary in order to develop reliable automated welding techniques. #12;Introduction During the past decade

Eagar, Thomas W.

142

Automation improves personal effectiveness while reducing drudgery  

Science Journals Connector (OSTI)

Automation improves personal effectiveness while reducing drudgery ... "The term automation ," says one Department of Labor official with undisguised feeling, "is a hopeless semantic jungle." ... One industry man defines automation very loosely as any way of doing things better with machines. ...

1966-03-14T23:59:59.000Z

143

Burst Switching for Energy Efficiency in Optical Networks  

Science Journals Connector (OSTI)

Energy consumption of electronic burst switching is modeled and compared to electronic packet switching in the network core and edge. It is shown that burst switching can provide...

Peng, Shuping; Hinton, Kerry James; Baliga, Jayant; Tucker, Rodney Stuart; Li, Zhengbin; Xu, Anshi

144

Northwest Open Automated Demand Response Technology Demonstration Project  

E-Print Network (OSTI)

Facility Technician) Automated Logic Corporation: Ivanembedded in the Targets Automated Logic Corporation (ALC)

Kiliccote, Sila

2010-01-01T23:59:59.000Z

145

Automated fiber pigtailing machine  

DOE Patents (OSTI)

The Automated Fiber Pigtailing Machine (AFPM) aligns and attaches optical fibers to optoelectronic (OE) devices such as laser diodes, photodiodes, and waveguide devices without operator intervention. The so-called pigtailing process is completed with sub-micron accuracies in less than 3 minutes. The AFPM operates unattended for one hour, is modular in design and is compatible with a mass production manufacturing environment. This machine can be used to build components which are used in military aircraft navigation systems, computer systems, communications systems and in the construction of diagnostics and experimental systems. 26 figs.

Strand, O.T.; Lowry, M.E.

1999-01-05T23:59:59.000Z

146

Chapter 11 - Industrial Automation  

Science Journals Connector (OSTI)

The industrial systems of the future are complex systems composed of vast numbers of devices interacting with each other and with enterprise systems. Modern technologies such as web services, service-oriented architectures (SOAs), the cloud, etc. make it possible for sophisticated infrastructures to emerge in future factories. We take a closer look at key visionary aspects that are expected to be introduced in the industrial automation domain in the years to come, and the pivotal role of M2M and IoT. Additionally, we investigate the impact on the collaboration of machines among themselves and with enterprise systems and their services.

Jan Hller; Vlasios Tsiatsis; Catherine Mulligan; Stamatis Karnouskos; Stefan Avesand; David Boyle

2014-01-01T23:59:59.000Z

147

Automating dipole subtraction  

E-Print Network (OSTI)

We report on automating the Catani-Seymour dipole subtraction which is a general procedure to treat infrared divergences in real emission processes at next-to-leading order in QCD. The automatization rests on three essential steps: the creation of the dipole terms, the calculation of the color linked squared Born matrix elements, and the evaluation of different helicity amplitudes. The routines have been tested for a number of complex processes, such as the real emission process gg --> t anti-t ggg.

K. Hasegawa; S. Moch; P. Uwer

2008-07-23T23:59:59.000Z

148

Installation and Commissioning Automated Demand Response Systems  

E-Print Network (OSTI)

their partnership in demand response automation research andand Techniques for Demand Response. LBNL Report 59975. Mayof Fully Automated Demand Response in Large Facilities.

Kiliccote, Sila; Global Energy Partners; Pacific Gas and Electric Company

2008-01-01T23:59:59.000Z

149

Home Network Technologies and Automating Demand Response  

E-Print Network (OSTI)

and Automating Demand Response Charles McParland, Lawrenceand Automating Demand Response Charles McParland, LBNLCommercial and Residential Demand Response Overview of the

McParland, Charles

2010-01-01T23:59:59.000Z

150

Automation in X-Ray Crystallography  

Science Journals Connector (OSTI)

Automation in X-Ray Crystallography ... But in the past few years, automation procedures have been applied to intrinsically superior experimental methods. ...

S.C. ABRAHAMS

1963-06-03T23:59:59.000Z

151

Understanding roi metrics for software test automation.  

E-Print Network (OSTI)

??Software test automation is widely accepted as an efficient software testing technique. However, automation has failed to deliver the expected productivity more often than not. (more)

Jayachandran, Naveen

2005-01-01T23:59:59.000Z

152

Help Line  

NLE Websites -- All DOE Office Websites (Extended Search)

Help Line Help Line Ombuds Help Line Committed to the fair and equitable treatment of all employees, contractors, and persons doing business with the Laboratory. Contact Ombuds Office (505)665-2837 Email Help Line (505) 667-9370 Fax (505) 667-3119 Map & Hours Help Line: (505) 667-9370 As an option to visiting the Ombuds office, we provide service through a telephone Help Line and email. The telephone Help Line is useful for individuals who have concerns and want advice or referral while preserving confidentiality and anonymity. Callers may remain anonymous and the Help Line does not have caller ID or other methods of identifying callers. The Help Line maintains the same level of confidentiality and neutrality as the other Ombuds services. The Ombuds Help Line is not for reporting emergencies or officially

153

DA (Distribution Automation) (Smart Grid Project) | Open Energy Information  

Open Energy Info (EERE)

DA (Distribution Automation) (Smart Grid Project) DA (Distribution Automation) (Smart Grid Project) Jump to: navigation, search Project Name DA (Distribution Automation) Country Netherlands Coordinates 52.132633°, 5.291266° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":52.132633,"lon":5.291266,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

154

International Automated Systems Inc IAUS | Open Energy Information  

Open Energy Info (EERE)

International Automated Systems Inc IAUS International Automated Systems Inc IAUS Jump to: navigation, search Name International Automated Systems Inc (IAUS) Place Salem, Utah Zip 84653 Product Has developed a lens-based technology for concentrating heat in STEGSs, which it plans to deploy at projects. Coordinates 42.554485°, -88.110549° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.554485,"lon":-88.110549,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

155

Automation and security of Supply (Smart Grid Project) | Open Energy  

Open Energy Info (EERE)

Automation and security of Supply (Smart Grid Project) Automation and security of Supply (Smart Grid Project) Jump to: navigation, search Project Name Automation and security of Supply Country Denmark Coordinates 56.26392°, 9.501785° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":56.26392,"lon":9.501785,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

156

Optical switch using Risley prisms  

DOE Patents (OSTI)

An optical switch using Risley prisms and rotary microactuators to independently rotate the wedge prisms of each Risley prism pair is disclosed. The optical switch comprises an array of input Risley prism pairs that selectively redirect light beams from a plurality of input ports to an array of output Risley prism pairs that similarly direct the light beams to a plurality of output ports. Each wedge prism of each Risley prism pair can be independently rotated by a variable-reluctance stepping rotary microactuator that is fabricated by a multi-layer LIGA process. Each wedge prism can be formed integral to the annular rotor of the rotary microactuator by a DXRL process.

Sweatt, William C. (Albuquerque, NM); Christenson, Todd R. (Albuquerque, NM)

2003-04-15T23:59:59.000Z

157

Optical Switch Using Risley Prisms  

DOE Patents (OSTI)

An optical switch using Risley prisms and rotary microactuators to independently rotate the wedge prisms of each Risley prism pair is disclosed. The optical switch comprises an array of input Risley prism pairs that selectively redirect light beams from a plurality of input ports to an array of output Risley prism pairs that similarly direct the light beams to a plurality of output ports. Each wedge prism of each Risley prism pair can be independently rotated by a variable-reluctance stepping rotary microactuator that is fabricated by a multi-layer LIGA process. Each wedge prism can be formed integral to the annular rotor of the rotary microactuator by a DXRL process.

Sweatt, William C. (Albuquerque, NM); Christenson, Todd R. (Albuquerque, NM)

2005-02-22T23:59:59.000Z

158

Definition: Remote Service Switch | Open Energy Information  

Open Energy Info (EERE)

Service Switch Service Switch Jump to: navigation, search Dictionary.png Remote Service Switch A power switch within a smart meter that allows a utility to turn electrical service to a residential customer premise on or off. The switch is remotely operated from the utility using the AMI communications infrastructure. This feature is limited to residential meters providing 200 amp service or less, and allows a utility to quickly switch service without having to roll a service truck. This can be particularly useful for reducing service time and associated costs for establishing or terminating services for move-ins/move-outs, or for switching off service for safety reasons.[1] Related Terms advanced metering infrastructure References ↑ https://www.smartgrid.gov/category/technology/remote_service_switch

159

KSL Kuttler Automation Systems GmbH | Open Energy Information  

Open Energy Info (EERE)

KSL Kuttler Automation Systems GmbH KSL Kuttler Automation Systems GmbH Jump to: navigation, search Name KSL-Kuttler Automation Systems GmbH Place Dauchingen, Baden-Württemberg, Germany Zip 78083 Sector Solar Product KSL-Kuttler Automation Systems GmbH is a manufacturer of automation systems for the PCB-industry and solar industry. KSL Kuttler was acquired by Suntech in April 2008. Coordinates 48.090319°, 8.552377° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.090319,"lon":8.552377,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

160

Anode initiated surface flashover switch  

DOE Patents (OSTI)

A high voltage surface flashover switch has a pair of electrodes spaced by an insulator. A high voltage is applied to an anode, which is smaller than the opposing, grounded, cathode. When a controllable source of electrons near the cathode is energized, the electrons are attracted to the anode where they reflect to the insulator and initiate anode to cathode breakdown.

Brainard, John P. (Albuquerque, NM); Koss, Robert J. (Albuquerque, NM)

2003-04-29T23:59:59.000Z

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Off-line ion source terminal for ISAC at TRIUMF  

SciTech Connect

The off-line ion source (OLIS) terminal consists of a microwave cusp ion source, either a surface ion source or a hybrid surface-arc discharge ion source and an electrostatic switch that allows selecting any one of the sources without mechanical intervention. These sources provide variety of beams to ISAC experiments, for commissioning the accelerators, for setting up the radioactive experiments, and for tuning the beam lines. The microwave ion source has been operational since 1995 and provides singly and doubly charged beams from various stable isotopes for many ISAC experiments at high and low energy areas. Originally its prime goal was to provide beams from gaseous elements, but later two ovens and a sputtering system were added in order to provide beams from liquids and from solids. The surface ion source installed in 2002 can provide low energy spread beams from alkali and semialkali elements. It also has three separate ovens and an ionizer. Therefore, it can provide three different temperature regions simultaneously to provide different beams to ISAC. It is mainly used for laser spectroscopy experiments and other experiments, which require a finite beam quality. A hybrid surface-arc discharge ion source was also developed and installed in order to meet specific demands from experiments. This source terminal is now automated for start up and for mass selection. It is capable of providing stable beams for months without maintenance and it is also capable of providing negative ion beams if required. To date, over 40 different isotopes including many rear isotopes were delivered to various experiments from the OLIS source terminal. Performances of the ion sources and some of the results are discussed.

Jayamanna, K.; Ames, F.; Cojocaru, G.; Baartman, R.; Bricault, P.; Dube, R.; Laxdal, R.; Marchetto, M.; MacDonald, M.; Schmor, P.; Wight, G.; Yuan, D. [TRIUMF, 4004 Wesbrook Mall, Vancouver BC V6T 2A3 (Canada)

2008-02-15T23:59:59.000Z

162

Switch for serial or parallel communication networks  

DOE Patents (OSTI)

A communication switch apparatus and a method for use in a geographically extensive serial, parallel or hybrid communication network linking a multi-processor or parallel processing system has a very low software processing overhead in order to accommodate random burst of high density data. Associated with each processor is a communication switch. A data source and a data destination, a sensor suite or robot for example, may also be associated with a switch. The configuration of the switches in the network are coordinated through a master processor node and depends on the operational phase of the multi-processor network: data acquisition, data processing, and data exchange. The master processor node passes information on the state to be assumed by each switch to the processor node associated with the switch. The processor node then operates a series of multi-state switches internal to each communication switch. The communication switch does not parse and interpret communication protocol and message routing information. During a data acquisition phase, the communication switch couples sensors producing data to the processor node associated with the switch, to a downlink destination on the communications network, or to both. It also may couple an uplink data source to its processor node. During the data exchange phase, the switch couples its processor node or an uplink data source to a downlink destination (which may include a processor node or a robot), or couples an uplink source to its processor node and its processor node to a downlink destination.

Crosette, Dario B. (DeSoto, TX)

1994-01-01T23:59:59.000Z

163

Switch for serial or parallel communication networks  

DOE Patents (OSTI)

A communication switch apparatus and a method for use in a geographically extensive serial, parallel or hybrid communication network linking a multi-processor or parallel processing system has a very low software processing overhead in order to accommodate random burst of high density data. Associated with each processor is a communication switch. A data source and a data destination, a sensor suite or robot for example, may also be associated with a switch. The configuration of the switches in the network are coordinated through a master processor node and depends on the operational phase of the multi-processor network: data acquisition, data processing, and data exchange. The master processor node passes information on the state to be assumed by each switch to the processor node associated with the switch. The processor node then operates a series of multi-state switches internal to each communication switch. The communication switch does not parse and interpret communication protocol and message routing information. During a data acquisition phase, the communication switch couples sensors producing data to the processor node associated with the switch, to a downlink destination on the communications network, or to both. It also may couple an uplink data source to its processor node. During the data exchange phase, the switch couples its processor node or an uplink data source to a downlink destination (which may include a processor node or a robot), or couples an uplink source to its processor node and its processor node to a downlink destination. 9 figs.

Crosette, D.B.

1994-07-19T23:59:59.000Z

164

Honeywell modular automation system acceptance test report  

SciTech Connect

This document provides the results of the Acceptance Test Procedure for the Honeywell Modular Automation System.

Cunningham, L.T., Westinghouse Hanford

1996-06-14T23:59:59.000Z

165

Automated Morphology Analysis of Nanoparticles  

E-Print Network (OSTI)

of this dissertation is to develop automated morphology analysis methods. Morphology analysis is comprised of three tasks: separate individual particles from an agglomerate of overlapping nano-objects (image segmentation); infer the particle's missing contours (shape...

Park, Chiwoo

2012-10-19T23:59:59.000Z

166

Aspects of automation mode confusion  

E-Print Network (OSTI)

Complex systems such as commercial aircraft are difficult for operators to manage. Designers, intending to simplify the interface between the operator and the system, have introduced automation to assist the operator. In ...

Wheeler, Paul H. (Paul Harrison)

2007-01-01T23:59:59.000Z

167

Microsoft Word - BingenSwitchDisposition_CXMemo.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7, 2012 7, 2012 REPLY TO ATTN OF: KEC-4 SUBJECT: Environmental Clearance Memorandum Joan Kendall Realty Specialist - TERR-3 Proposed Action: Bingen Substation Sectionalizing Switches Disposition Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.24 Property Transfers Location: Klickitat County, Washington Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: BPA proposes to sell two sectionalizing switches owned by BPA but located on PacifiCorp's Condit-Powerdale 69-kilovolt (kV) line in and adjacent to the Bingen Substation. BPA sold the Bingen substation to Klickitat County PUD in 1997 but retained ownership rights to inspect, maintain, repair, and replace its remaining revenue meters,

168

Lyons Switch, Oklahoma: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Switch, Oklahoma: Energy Resources Switch, Oklahoma: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 35.7749095°, -94.6915484° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":35.7749095,"lon":-94.6915484,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

169

The 'Problem' with Automation: Inappropriate Feedback and Interaction, not 'Over-Automation'  

Science Journals Connector (OSTI)

12 April 1990 research-article The 'Problem' with Automation: Inappropriate Feedback and Interaction, not 'Over-Automation' D. A. Norman As automation increasingly takes its place in industry, especially high risk industry...

1990-01-01T23:59:59.000Z

170

Type of automation failure: the effects on trust and reliance in automation.  

E-Print Network (OSTI)

??Past automation research has focused primarily on machine-related factors (e.g., automation reliability) and human-related factors (e.g., accountability). Other machine-related factors such as type of automation (more)

Johnson, Jason D.

2004-01-01T23:59:59.000Z

171

Participation through Automation: Fully Automated Critical Peak Pricing in Commercial Buildings  

E-Print Network (OSTI)

Figure 2. Demand Response Automation Server and BuildingII system to notify the Automation Server of an up comingoccurs day-ahead). 2. The Automation Server posts two pieces

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Kiliccote, Sila; Linkugel, Eric

2006-01-01T23:59:59.000Z

172

Slideshow: Flipping the Switch on LED Lighting for the National Mall |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Slideshow: Flipping the Switch on LED Lighting for the National Slideshow: Flipping the Switch on LED Lighting for the National Mall Slideshow: Flipping the Switch on LED Lighting for the National Mall January 31, 2012 - 3:05pm Addthis 1 of 8 Facing East toward the Capitol Building, LED retrofitted lights line the interior paths of the mall while preserving the architectural integrity of the original fixtures. Image: Energy Department Image | Photo by Quentin Kruger (Contractor) | Public Domain Date taken: 2012-01-30 06:00 2 of 8 Energy Secretary Steven Chu discusses the 65% savings on electric bills and lowered maintenance costs the National Parks Service is experiencing by switching to energy efficient LED lights. "Using energy-efficient LED light bulbs is an important way Americans can save money by saving energy," said

173

Slideshow: Flipping the Switch on LED Lighting for the National Mall |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Slideshow: Flipping the Switch on LED Lighting for the National Slideshow: Flipping the Switch on LED Lighting for the National Mall Slideshow: Flipping the Switch on LED Lighting for the National Mall January 31, 2012 - 3:05pm Addthis 1 of 8 Facing East toward the Capitol Building, LED retrofitted lights line the interior paths of the mall while preserving the architectural integrity of the original fixtures. Image: Energy Department Image | Photo by Quentin Kruger (Contractor) | Public Domain Date taken: 2012-01-30 06:00 2 of 8 Energy Secretary Steven Chu discusses the 65% savings on electric bills and lowered maintenance costs the National Parks Service is experiencing by switching to energy efficient LED lights. "Using energy-efficient LED light bulbs is an important way Americans can save money by saving energy," said

174

New Details of Ferroelectric Switching  

NLE Websites -- All DOE Office Websites (Extended Search)

New Details of Ferroelectric Switching New Details of Ferroelectric Switching All of our current information technology relies on devices that process information as binary ones and zeroes. Ferroelectric materials are of special interest to developers of the next generation of such devices because they exhibit polarized electronic states that can represent bits of information. Moreover, these materials retain their polarization states without consuming electrical power, making ferroelectrics the subject of intense study for nonvolatile memory applications in which data is stored even when the power is turned off. One problem, however, is polarization fatigue: after a number of cycles, the switchable polarization begins to taper off, rendering the device unusable. Recently, a team of researchers

175

Open Automated Demand Response for Small Commerical Buildings  

E-Print Network (OSTI)

ofFullyAutomatedDemand ResponseinLargeFacilities. FullyAutomatedDemandResponseTestsinLargeFacilities. OpenAutomated DemandResponseCommunicationStandards:

Dudley, June Han

2009-01-01T23:59:59.000Z

176

Scenarios for Consuming Standardized Automated Demand Response Signals  

E-Print Network (OSTI)

of Fully Automated Demand Response in Large Facilities.Fully Automated Demand Response Tests in Large Facilities.Interoperable Automated Demand Response Infrastructure.

Koch, Ed

2009-01-01T23:59:59.000Z

177

Automation World Features New White Paper on Wireless Security...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Automation World Features New White Paper on Wireless Security Automation World Features New White Paper on Wireless Security The April 2009 issue of Automation World magazine...

178

Disciplined agility for process control & automation ; Disciplined agility for process control and automation .  

E-Print Network (OSTI)

??Process automation vendors must consider agility as a basis to gain a competitive edge in innovation. Process Automation systems can impact the operating cost of (more)

Tibazarwa, Augustine

2009-01-01T23:59:59.000Z

179

Trust in automated systems the effect of automation level on trust calibration .  

E-Print Network (OSTI)

??Automated systems perform functions that were previously executed by a human. When using automation, the role of the human changes from operator to supervisor. For (more)

Walliser, James C.

2011-01-01T23:59:59.000Z

180

Manz Automation AG | Open Energy Information  

Open Energy Info (EERE)

AG AG Jump to: navigation, search Name Manz Automation AG Place Reutlingen, Baden-Württemberg, Germany Zip D-72768 Sector Solar Product German manufacturer of solar and LCD capital equipment. Coordinates 48.49159°, 9.21487° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.49159,"lon":9.21487,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

A simple figure of merit for high temperature superconducting switches  

SciTech Connect

The discovery of the new high temperature superconductors has revived interest in many special applications, including superconducting switches. For comparison of switch types, a simple figure of merit based in switch performance is proposed, derived for superconducting switches, and then calculated for thyristors and vacuum switches. The figure of merit is then used to show what critical current density would be needed for superconducting switches to compete with more conventional switches. 46 refs., 1 fig.

Honig, E.M.

1989-01-01T23:59:59.000Z

182

Real time automated inspection  

DOE Patents (OSTI)

A method and apparatus relating to the real time automatic detection and classification of characteristic type surface imperfections occurring on the surfaces of material of interest such as moving hot metal slabs produced by a continuous steel caster. A data camera transversely scans continuous lines of such a surface to sense light intensities of scanned pixels and generates corresponding voltage values. The voltage values are converted to corresponding digital values to form a digital image of the surface which is subsequently processed to form an edge-enhanced image having scan lines characterized by intervals corresponding to the edges of the image. The edge-enhanced image is thresholded to segment out the edges and objects formed by the edges are segmented out by interval matching and bin tracking. Features of the objects are derived and such features are utilized to classify the objects into characteristic type surface imperfections.

Fant, Karl M. (Minneapolis, MN); Fundakowski, Richard A. (Saint Paul, MN); Levitt, Tod S. (Minneapolis, MN); Overland, John E. (Plymouth, MN); Suresh, Bindinganavle R. (New Brighton, MN); Ulrich, Franz W. (Minneapolis, MN)

1985-01-01T23:59:59.000Z

183

Real time automated inspection  

DOE Patents (OSTI)

A method and apparatus are described relating to the real time automatic detection and classification of characteristic type surface imperfections occurring on the surfaces of material of interest such as moving hot metal slabs produced by a continuous steel caster. A data camera transversely scans continuous lines of such a surface to sense light intensities of scanned pixels and generates corresponding voltage values. The voltage values are converted to corresponding digital values to form a digital image of the surface which is subsequently processed to form an edge-enhanced image having scan lines characterized by intervals corresponding to the edges of the image. The edge-enhanced image is thresholded to segment out the edges and objects formed by the edges by interval matching and bin tracking. Features of the objects are derived and such features are utilized to classify the objects into characteristic type surface imperfections. 43 figs.

Fant, K.M.; Fundakowski, R.A.; Levitt, T.S.; Overland, J.E.; Suresh, B.R.; Ulrich, F.W.

1985-05-21T23:59:59.000Z

184

Chapter 8 - Automation and Monitoring  

Science Journals Connector (OSTI)

This chapter begins with the topic of process automation which has the intent of making repetitive tasks more consistent, faster, and cheaper. As part of this discussion, we talk about how to determine if a process should be automated, how to document the process in preparation for automation, and how to perform the actual automation. A variety of scripting languages can be used to perform process automation and general best practices for scripting these processes is discussed as well as some thoughts on how to choose the right scripting language for the job. The second part of the chapter is all about monitoring of enterprise applications. Key performance indicators (KPIs) that give insight into the enterprise applications performance over time as well as determining when to alert the enterprise applications administrator to potential problems within the application are discussed. Alerts are another important topic associated with enterprise application monitoring that is discussed including how to properly tune alerts through the selection of appropriate KPIs, retry counts, and retry intervals.

Jeremy Faircloth

2014-01-01T23:59:59.000Z

185

High-index-contrast electromechanical optical switches  

E-Print Network (OSTI)

System developers are looking to replace protocol-dependent, bandwidth-limited optical networks with intelligent optically-transparent integrated photonic networks. Several electromechanical optical switches are explored ...

Bryant, Reginald (Reginald Eugene), 1978-

2011-01-01T23:59:59.000Z

186

Switched reluctance motor : design, simulation and control.  

E-Print Network (OSTI)

??This thesis presents a design method for a switched reluctance (SR) motor to optimise torque production for two types of 3 phase 6/4 poles SRM (more)

Aljaism, Wadah A.

2007-01-01T23:59:59.000Z

187

Switched reluctance generator for wind power applications.  

E-Print Network (OSTI)

??The Switched Reluctance Machine (SRM) has received significant industry attention over the past few decades. It is economical, reliable, and easy to control, due to (more)

Nassereddine, Mohamad

2011-01-01T23:59:59.000Z

188

Multiprocessor switch with selective pairing  

DOE Patents (OSTI)

System, method and computer program product for a multiprocessing system to offer selective pairing of processor cores for increased processing reliability. A selective pairing facility is provided that selectively connects, i.e., pairs, multiple microprocessor or processor cores to provide one highly reliable thread (or thread group). Each paired microprocessor or processor cores that provide one highly reliable thread for high-reliability connect with a system components such as a memory "nest" (or memory hierarchy), an optional system controller, and optional interrupt controller, optional I/O or peripheral devices, etc. The memory nest is attached to a selective pairing facility via a switch or a bus

Gara, Alan; Gschwind, Michael K; Salapura, Valentina

2014-03-11T23:59:59.000Z

189

Automated Demand Response Opportunities in Wastewater Treatment Facilities  

E-Print Network (OSTI)

Interoperable Automated Demand Response Infrastructure,study of automated demand response in wastewater treatmentopportunities for demand response control strategies in

Thompson, Lisa

2008-01-01T23:59:59.000Z

190

Automation in image cytometry : continuous HCS and kinetic image cytometry  

E-Print Network (OSTI)

OF CALIFORNIA, SAN DIEGO Automation in Image Cytometry:xiv Abstract of Dissertation Automation in Image Cytometry:

Charlot, David J.

2012-01-01T23:59:59.000Z

191

Automation of Fluorous Solid-Phase Extraction for Parallel Synthesis  

Science Journals Connector (OSTI)

Automation of Fluorous Solid-Phase Extraction for Parallel Synthesis ... Cartridge conditioning, sample loading, elution, and rinsing are automated. ...

Wei Zhang; Yimin Lu

2006-10-17T23:59:59.000Z

192

Open Automated Demand Response for Small Commerical Buildings  

E-Print Network (OSTI)

communications. Automated Logic Model Vendor LoadTypeoftheHVAC. Automated Logic Model Vendor LoadType

Dudley, June Han

2009-01-01T23:59:59.000Z

193

Active high-power RF switch and pulse compression system  

DOE Patents (OSTI)

A high-power RF switching device employs a semiconductor wafer positioned in the third port of a three-port RF device. A controllable source of directed energy, such as a suitable laser or electron beam, is aimed at the semiconductor material. When the source is turned on, the energy incident on the wafer induces an electron-hole plasma layer on the wafer, changing the wafer's dielectric constant, turning the third port into a termination for incident RF signals, and. causing all incident RF signals to be reflected from the surface of the wafer. The propagation constant of RF signals through port 3, therefore, can be changed by controlling the beam. By making the RF coupling to the third port as small as necessary, one can reduce the peak electric field on the unexcited silicon surface for any level of input power from port 1, thereby reducing risk of damaging the wafer by RF with high peak power. The switch is useful to the construction of an improved pulse compression system to boost the peak power of microwave tubes driving linear accelerators. In this application, the high-power RF switch is placed at the coupling iris between the charging waveguide and the resonant storage line of a pulse compression system. This optically controlled high power RF pulse compression system can handle hundreds of Megawatts of power at X-band.

Tantawi, Sami G. (San Mateo, CA); Ruth, Ronald D. (Woodside, CA); Zolotorev, Max (Mountain View, CA)

1998-01-01T23:59:59.000Z

194

A new energy optimizing control strategy for switched reluctance motors  

SciTech Connect

This paper describes a new and machine-independent method to minimize the energy consumption of a speed controlled Switched Reluctance Motor (SRM). The control strategy is to vary the duty cycle of the applied dc voltage in order to obtain the desired speed quickly and when operating in steady-state vary the turn-on angle ({alpha}{sub on}) of the phase voltage to minimize the energy consumption. The power flow is measured in the dc-link and used to control the turn-on angle. Simulations carried out on a three-phase 6/4 pole SRM justify the algorithm and the physical implementation in a Siemens SAB 80C517A microcontroller is described. Measurements on two different load systems show it is possible to minimize the energy consumption on-line in a speed controlled Switched Reluctance Motor without losing the dynamic performance. A comparison with an ordinary mode-shift controlled SRM shows more than an 8% increase in overall efficiency for some operation points. The algorithm is fully applicable to other Switched Reluctance Motors at other power levels or with other pole configurations.

Kjaer, P.C. [Univ. of Glasgow (United Kingdom)] [Univ. of Glasgow (United Kingdom); Nielsen, P. [Danfoss A/S, Graasten (Denmark). Transmission Div.] [Danfoss A/S, Graasten (Denmark). Transmission Div.; Andersen, L. [Nilfisk A/S, Broendby (Denmark)] [Nilfisk A/S, Broendby (Denmark); Blaabjerg, F. [Aalborg Univ. (Denmark)] [Aalborg Univ. (Denmark)

1995-09-01T23:59:59.000Z

195

Process Control and Automation: The Bagrit Vision  

Science Journals Connector (OSTI)

Automation, broadly defined as the computer-assisted control of industrial processes, covers a wide spectrum of applications. Here we need to narrow the spectrum somewhat, so as to focus on the word automation as...

Emeritus Professor Simon Lavington

2011-01-01T23:59:59.000Z

196

Microcomputer Applications in Power System Substation Automation  

Science Journals Connector (OSTI)

The object of this chapter is to describe power system applications of microcomputers, particularly in the area of power substation automation.The major functions required in substation automation are reviewed an...

C. T. Nguyen; R. Grondin; A. St-Jacques

1983-01-01T23:59:59.000Z

197

Home Automation with ZigBee  

Science Journals Connector (OSTI)

This article discusses a topic of home automation, also called domotics, and provides an ... advantages provided by ZigBee wireless networking standard for home automation solutions. ZigBee protocol implementatio...

Maxim Osipov

2008-01-01T23:59:59.000Z

198

Disciplined agility for process control & automation  

E-Print Network (OSTI)

Process automation vendors must consider agility as a basis to gain a competitive edge in innovation. Process Automation systems can impact the operating cost of manufacturing equipment, the safe control of large quantities ...

Tibazarwa, Augustine

2009-01-01T23:59:59.000Z

199

Technical University of Denmark rsted DTU Automation  

E-Print Network (OSTI)

Technical University of Denmark ?rsted · DTU Automation Project: SICAM - SIngle Conversion stage based SICAM using an LC-network Petar Ljusev, MSc., Ph.D. student, ?rsted · DTU Automation e-mail: pl

200

Automated Operating Procedures for Transfer Limits  

E-Print Network (OSTI)

Automated Operating Procedures for Transfer Limits Final Project Report Power Systems Engineering · Illinois · Iowa State · Texas A&M · Washington State · Wisconsin Automated Operating Procedures

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Automated Resoning in Modal Logics 0 (GENERAL PURPOSE) AUTOMATED REASONING IN MODAL LOGICS  

E-Print Network (OSTI)

Automated Resoning in Modal Logics 0 (GENERAL PURPOSE) AUTOMATED REASONING IN MODAL LOGICS BRANDEN FITELSON Department of Philosophy San Jos�e State University & Automated Reasoning Group.wisc.edu/fitelson BF @ AR @ MCS @ ANL & Philosophy @ SJSU May 16, 2002 Automated Resoning in Modal Logics 1

Fitelson, Branden

202

Automated Video-Based Fall Detection  

E-Print Network (OSTI)

home assistive monitoring uses technology such as sensors and cameras to aid live-alone aging persons, typically involving automation.

Edgcomb, Alex Daniel

2014-01-01T23:59:59.000Z

203

A comprehensive strategy for transmission switching action in simultaneous clearing of energy and spinning reserve markets  

Science Journals Connector (OSTI)

Abstract There is a great resolution calling for smart grids in recent years. Introduction of new technologies, that make the network flexible and controllable, is a main part of smart grid concept and a key factor to its success. Transmission network as a part of system network has drawn less attention. Transmission switching as a new transmission service can release us from load shedding and remove the constraints violations. Transmission switching can provide economic benefits compared to other control methods such as generation unit rescheduling or load shedding for contingency management. Utilizing a stochastic mix-integer nonlinear programming (SMINLP) model, transmission switching is used during contingencies and steady state to determine optimal required energy and reserve values. Stochastic joint energy and reserve markets with transmission switching considering dynamic constraints has been proposed to minimize the cost of supplying load, security expenses. Considering dynamic constraints in proposed model avoid the occurrence of transient instability when opening the line in transmission switching action. A network reduction method based on modified Jacobean AC NewtonRaphson technique power flow considering switchable line in technique is used for speeding up the calculation, efficiency and simplicity. To investigate the efficiency of the proposed strategy IEEE 14 bus test and IEEE 57 bus test system are studied. According to the obtained results, this strategy decreases energy and reserve marginal prices, as well as security cost.

Rahmat Aazami; Mahmoud Reza Haghifam; Farzad Soltanian; Masoud Moradkhani

2015-01-01T23:59:59.000Z

204

Disposable and removable nucleic acid extraction and purification cartridges for automated flow-through systems  

DOE Patents (OSTI)

Removable cartridges are used on automated flow-through systems for the purpose of extracting and purifying genetic material from complex matrices. Different types of cartridges are paired with specific automated protocols to concentrate, extract, and purifying pathogenic or human genetic material. Their flow-through nature allows large quantities sample to be processed. Matrices may be filtered using size exclusion and/or affinity filters to concentrate the pathogen of interest. Lysed material is ultimately passed through a filter to remove the insoluble material before the soluble genetic material is delivered past a silica-like membrane that binds the genetic material, where it is washed, dried, and eluted. Cartridges are inserted into the housing areas of flow-through automated instruments, which are equipped with sensors to ensure proper placement and usage of the cartridges. Properly inserted cartridges create fluid- and air-tight seals with the flow lines of an automated instrument.

Regan, John Frederick

2014-09-09T23:59:59.000Z

205

Technical Report TRARP1695 Automated Reasoning Project  

E-Print Network (OSTI)

Technical Report TR­ARP­16­95 Automated Reasoning Project Research School of Information Sciences Heuerding Automated Institute for Applied Mathematics Reasoning Project and Computer Science ANU University that contains automated proof procedures based on modal Gentzen systems for numerous propositional (nonclassical

Goré, Rajeev

206

AUTOMATED CRITICAL PEAK PRICING FIELD TESTS  

E-Print Network (OSTI)

AUTOMATED CRITICAL PEAK PRICING FIELD TESTS: 2006 PROGRAM DESCRIPTION AND RESULTS) for development of the DR Automation Server System This project could not have been completed without extensive: Greg Watson and Mark Lott · C&C Building Automation: Mark Johnson and John Fiegel · Chabot Space

207

INTEGRATING AUTOMATION DESIGN INFORMATION WITH XML  

E-Print Network (OSTI)

INTEGRATING AUTOMATION DESIGN INFORMATION WITH XML Mika Viinikkala, Seppo Kuikka Institute of Automation and Control, Tampere University of Technology, P.O. Box 692, 33101 Tampere, Finland Email: mika.viinikkala@tut.fi, seppo.kuikka@tut.fi Keywords: Systems integration, XML, automation design Abstract: This paper presents

208

A DISTRIBUTED AUTOMATION SYSTEM FOR ELECTROPHYSICAL INSTALLATIONS  

E-Print Network (OSTI)

A DISTRIBUTED AUTOMATION SYSTEM FOR ELECTROPHYSICAL INSTALLATIONS V.R. Kozak Budker Institute There was designed a set of devices for automation systems of physical installations. On this basis approach. KEY WORDS Automation, systems, applications, CANBUS, embedded, controller. 1. Introduction Budker

Kozak, Victor R.

209

TAMPERE UNIVERSITY OF TECHNOLOGY DEPARTMENT OF AUTOMATION  

E-Print Network (OSTI)

TAMPERE UNIVERSITY OF TECHNOLOGY DEPARTMENT OF AUTOMATION An Intelligent Web Service for Operation 2004 Examiner: Prof. Seppo Kuikka #12;2 Abstract TAMPERE UNIVERSITY OF TECHNOLOGY Automation Degree Program Institute of Automation and Control Jaakkola, Veli-Pekka: An Intelligent Web Service for Operation

210

Optoelectronic switches based on diffusive conduction Hilmi Volkan Demira  

E-Print Network (OSTI)

Optoelectronic switches based on diffusive conduction Hilmi Volkan Demira and Fatih Hakan Koklu the process of diffusive conduction that we use in our optoelectronic switches to achieve rapid optical. We demonstrate the feasibility of using such diffusive conductive optoelectronic switches

Miller, David A. B.

211

Gas mixtures for spark gap closing switches  

DOE Patents (OSTI)

Gas mixtures for use in spark gap closing switches comprised of fluorocarbons and low molecular weight, inert buffer gases. To this can be added a third gas having a low ionization potential relative to the buffer gas. The gas mixtures presented possess properties that optimized the efficiency spark gap closing switches. 6 figs.

Christophorou, L.G.; McCorkle, D.L.; Hunter, S.R.

1987-02-20T23:59:59.000Z

212

Ames Lab 101: Ultrafast Magnetic Switching  

SciTech Connect

Ames Laboratory physicists have found a new way to switch magnetism that is at least 1000 times faster than currently used in magnetic memory technologies. Magnetic switching is used to encode information in hard drives, magnetic random access memory and other computing devices. The discovery potentially opens the door to terahertz and faster memory speeds.

Jigang Wang

2013-04-08T23:59:59.000Z

213

Ames Lab 101: Ultrafast Magnetic Switching  

ScienceCinema (OSTI)

Ames Laboratory physicists have found a new way to switch magnetism that is at least 1000 times faster than currently used in magnetic memory technologies. Magnetic switching is used to encode information in hard drives, magnetic random access memory and other computing devices. The discovery potentially opens the door to terahertz and faster memory speeds.

Jigang Wang

2013-06-05T23:59:59.000Z

214

Automating Shallow Seismic Imaging  

SciTech Connect

This seven-year, shallow-seismic reflection research project had the aim of improving geophysical imaging of possible contaminant flow paths. Thousands of chemically contaminated sites exist in the United States, including at least 3,700 at Department of Energy (DOE) facilities. Imaging technologies such as shallow seismic reflection (SSR) and ground-penetrating radar (GPR) sometimes are capable of identifying geologic conditions that might indicate preferential contaminant-flow paths. Historically, SSR has been used very little at depths shallower than 30 m, and even more rarely at depths of 10 m or less. Conversely, GPR is rarely useful at depths greater than 10 m, especially in areas where clay or other electrically conductive materials are present near the surface. Efforts to image the cone of depression around a pumping well using seismic methods were only partially successful (for complete references of all research results, see the full Final Technical Report, DOE/ER/14826-F), but peripheral results included development of SSR methods for depths shallower than one meter, a depth range that had not been achieved before. Imaging at such shallow depths, however, requires geophone intervals of the order of 10 cm or less, which makes such surveys very expensive in terms of human time and effort. We also showed that SSR and GPR could be used in a complementary fashion to image the same volume of earth at very shallow depths. The primary research focus of the second three-year period of funding was to develop and demonstrate an automated method of conducting two-dimensional (2D) shallow-seismic surveys with the goal of saving time, effort, and money. Tests involving the second generation of the hydraulic geophone-planting device dubbed the ''Autojuggie'' showed that large numbers of geophones can be placed quickly and automatically and can acquire high-quality data, although not under rough topographic conditions. In some easy-access environments, this device could make SSR surveying considerably more efficient and less expensive, particularly when geophone intervals of 25 cm or less are required. The most recent research analyzed the difference in seismic response of the geophones with variable geophone spike length and geophones attached to various steel media. Experiments investigated the azimuthal dependence of the quality of data relative to the orientation of the rigidly attached geophones. Other experiments designed to test the hypothesis that the data are being amplified in much the same way that an organ pipe amplifies sound have so far proved inconclusive. Taken together, the positive results show that SSR imaging within a few meters of the earth's surface is possible if the geology is suitable, that SSR imaging can complement GPR imaging, and that SSR imaging could be made significantly more cost effective, at least in areas where the topography and the geology are favorable. Increased knowledge of the Earth's shallow subsurface through non-intrusive techniques is of potential benefit to management of DOE facilities. Among the most significant problems facing hydrologists today is the delineation of preferential permeability paths in sufficient detail to make a quantitative analysis possible. Aquifer systems dominated by fracture flow have a reputation of being particularly difficult to characterize and model. At chemically contaminated sites, including U.S. Department of Energy (DOE) facilities and others at Department of Defense (DOD) installations worldwide, establishing the spatial extent of the contamination, along with the fate of the contaminants and their transport-flow directions, is essential to the development of effective cleanup strategies. Detailed characterization of the shallow subsurface is important not only in environmental, groundwater, and geotechnical engineering applications, but also in neotectonics, mining geology, and the analysis of petroleum reservoir analogs. Near-surface seismology is in the vanguard of non-intrusive approaches to increase knowledge of the shallow subsurface; our

Steeples, Don W.

2004-12-09T23:59:59.000Z

215

Chapter 13 - Commercial Building Automation  

Science Journals Connector (OSTI)

A Building Automation System (BAS) is a computerized, intelligent system that controls and measures lighting, climate, security, and other mechanical and electrical systems in a building. The purpose of a BAS is typically to reduce energy and maintenance costs, as well as to increase control, comfort, reliability, and ease of use for maintenance staff and tenants.

Jan Hller; Vlasios Tsiatsis; Catherine Mulligan; Stamatis Karnouskos; Stefan Avesand; David Boyle

2014-01-01T23:59:59.000Z

216

Automated computation meets hot QCD  

E-Print Network (OSTI)

We give a short review on recent progress in the field of automated calculations in finite-temperature field theory, where integration-by-parts techniques have proven (almost) as useful as in the zero-temperature case. Furthermore, we provide one concrete example of an evaluation of a new three-loop master sum-integral that exhibits maximal divergence.

Ioan Ghisoiu; York Schroder

2012-10-19T23:59:59.000Z

217

ALMS: Automated logic mapping system  

Science Journals Connector (OSTI)

ALMS is a set of design automation computer programs which accepts as input a description of a logic design, specifications of modules (e.g., chips, cards, etc.) into which the blocks of the design are to be partitioned or mapped, and some constraints ...

R. L. Russo; P. K. Wolff, Sr.

1971-06-01T23:59:59.000Z

218

Seismic switch for strong motion measurement  

DOE Patents (OSTI)

A seismic switching device that has an input signal from an existing microseismic station seismometer and a signal from a strong motion measuring instrument. The seismic switch monitors the signal level of the strong motion instrument and passes the seismometer signal to the station data telemetry and recording systems. When the strong motion instrument signal level exceeds a user set threshold level, the seismometer signal is switched out and the strong motion signal is passed to the telemetry system. The amount of time the strong motion signal is passed before switching back to the seismometer signal is user controlled between 1 and 15 seconds. If the threshold level is exceeded during a switch time period, the length of time is extended from that instant by one user set time period.

Harben, Philip E. (Oakley, CA); Rodgers, Peter W. (Santa Barbara, CA); Ewert, Daniel W. (Patterson, CA)

1995-01-01T23:59:59.000Z

219

Seismic switch for strong motion measurement  

DOE Patents (OSTI)

A seismic switching device is described that has an input signal from an existing microseismic station seismometer and a signal from a strong motion measuring instrument. The seismic switch monitors the signal level of the strong motion instrument and passes the seismometer signal to the station data telemetry and recording systems. When the strong motion instrument signal level exceeds a user set threshold level, the seismometer signal is switched out and the strong motion signal is passed to the telemetry system. The amount of time the strong motion signal is passed before switching back to the seismometer signal is user controlled between 1 and 15 seconds. If the threshold level is exceeded during a switch time period, the length of time is extended from that instant by one user set time period. 11 figs.

Harben, P.E.; Rodgers, P.W.; Ewert, D.W.

1995-05-30T23:59:59.000Z

220

Power Consumption and Scalability of Optically Switched Interconnects  

Science Journals Connector (OSTI)

We analyzed three realizations of optically switched interconnects regarding power consumption and scalability. The optically switched interconnects provide higher power efficiency...

Fehratovic, Naida; Aleksic, Slavisa

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Modeling Combustion Control for High Power Diesel Mode Switching...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combustion Control for High Power Diesel Mode Switching Modeling Combustion Control for High Power Diesel Mode Switching Poster presentation given at the 16th Directions in...

222

Switch on Clean Energy Activity Book | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Switch on Clean Energy Activity Book Switch on Clean Energy Activity Book Games and activity book about energy efficiency and renewable energy technologies for kids....

223

Flipping the switch on magnetism in strontium titanate  

NLE Websites -- All DOE Office Websites (Extended Search)

Flipping the switch on magnetism in strontium titanate Flipping the switch on magnetism in strontium titanate Researchers have found a way to magnetize this material using light,...

224

Artificial molecules that switch "handedness" at light-speed  

NLE Websites -- All DOE Office Websites (Extended Search)

molecules that switch "handedness" Artificial molecules that switch "handedness" at light-speed Researchers create the first artificial molecules whose chirality can be...

225

Use of High?Power Combiners and Fast Directional Switches in ECRH Systems  

Science Journals Connector (OSTI)

The new generation of compact devices for the combination and the fast switching of high?power millimeter?wave beams [1] for Electron Cyclotron Heating (ECH) gives the possibility to switch the power (in tens of microseconds) between two lines (or two ECH launchers even modulating it between them) and combine two gyrotron sources (or in principle even more) in one single transmission line for doubling the transmitted power. This is useful in many respects in order to: 1) ?double the efficiency in modulated EC for neoclassical Tearing Modes (NTM) stabilization 2) avoid to switch?off gyrotrons in conventional (slow) switching 3) electronically control the power sharing between different applications (heating/current?drive or NTM stabilization) 4) upgrade the existing ECH systems to twice the power without adding complete transmission lines and launchers 5) test components at a power doubled with respect to the power capability of the available sources. This opens the way to the development of a more effective active real?time control of the ECRH power routing and generally to more flexible and powerful ECH systems. The development of different devices and the advantages for (and in view of) ITER are addressed.

A. Bruschi; W. Kasparek; V. Erckmann; M. Petelin; W. Bin; O. DArcangelo; L. Lubyako; V. Muzzini; B. Plaum

2009-01-01T23:59:59.000Z

226

Rockwell Automation - Owens Corning Teaming Profile  

NLE Websites -- All DOE Office Websites (Extended Search)

Rockwell Automation Owens Corning Rockwell Automation Owens Corning 1201 S. Second Street 247 York Road Milwaukee, WI 53204 Guelph, Ontario N1E 3G4 Business: Industrial Automation Business: Textile / Fiber Nigel Hitchings Frank Peel Marketing Manager Electrical Support Specialist Phone: 508-357-8404 Phone: 519-823-7208 Email: nehitchings@ra.rockwell.com Email: frank.peel@owenscorning.com Owens Corning partners with Rockwell Automation to retrofit fans with VFDs, saving $67,000 annually Project Scope Owens Corning and Rockwell Automation installed Variable Frequency Drives (VFDs) on one 125HP cooling fan and three 40HP recirculation fans at the Owens Corning Guelph Glass Plant. The VFDs were integrated with the existing Rockwell Automation programmable automation controller to collect

227

Specimen coordinate automated measuring machine/fiducial automated measuring machine  

SciTech Connect

The Specimen coordinate Automated Measuring Machine (SCAMM) and the Fiducial Automated Measuring Machine (FAMM) is a computer controlled metrology system capable of measuring length, width, and thickness, and of locating fiducial marks. SCAMM and FAMM have many similarities in their designs, and they can be converted from one to the other without taking them out of the hot cell. Both have means for: supporting a plurality of samples and a standard; controlling the movement of the samples in the +/- X and Y directions; determining the coordinates of the sample; compensating for temperature effects; and verifying the accuracy of the measurements and repeating as necessary. SCAMM and FAMM are designed to be used in hot cells.

Hedglen, Robert E. (Bethel Park, PA); Jacket, Howard S. (Pittsburgh, PA); Schwartz, Allan I. (Turtle Creek, PA)

1991-01-01T23:59:59.000Z

228

Muehrcke's Lines  

Science Journals Connector (OSTI)

Figure 1. A 46-year-old woman with metastatic sarcoma who had been treated with five cycles of doxorubicin, ifosfamide, and mesna chemotherapy presented with two symmetrical, horizontal white lines on all of her fingernails but not on her toenails. A diagnosis of ...

Morrison-Bryant M.; Gradon J.D.

2007-08-30T23:59:59.000Z

229

Beau's Lines  

Science Journals Connector (OSTI)

Figure 1. A 62-year-old woman received six cycles of docetaxel chemotherapy during a six-month period for recurrent metastatic breast cancer. She had completed treatment four weeks before this photograph was taken. Six evenly spaced, transverse lines were noted on ...

Mortimer N.J.; Mills J.

2004-10-21T23:59:59.000Z

230

Understanding fuel switching under the EU ETS  

Science Journals Connector (OSTI)

Since the creation of the European Union Emission Trading Scheme (EU ETS), European power producers have monitored carbon emissions resulting from the composition of their production. Fuel switching is the main short-term abatement measure under the EU ETS. It consists in substituting combined cycle gas turbines (CCGTs) for hard-coal plants in off-peak power generation. Thereby coal plants run for shorter periods, allowing power producers to reduce their CO2 emissions. The aim of this paper is two-fold. First, we summarise the main characteristics of fuel switching under the EU ETS. Second, we show how differences in the energy/environmental efficiency of power plants impact the marginal cost of fuel switching. We demonstrate that the level of switching effort influences the dependence of the marginal cost of switching on fuel prices. The marginal cost of switching is shown to be increasingly dependent on the gas price as the switching effort increases, whereas the net effect is undetermined for the coal price. All the conclusions are summarised in several illustrative examples.

Vincent Bertrand

2012-01-01T23:59:59.000Z

231

Automated detection of coherent Lagrangian vortices in two-dimensional unsteady flows  

E-Print Network (OSTI)

Coherent boundaries of Lagrangian vortices in fluid flows have recently been identified as closed orbits of line fields associated with the Cauchy-Green strain tensor. Here we develop a fully automated procedure for the detection of such closed orbits in large-scale velocity data sets. We illustrate the power of our method on ocean surface velocities derived from satellite altimetry.

Karrasch, Daniel; Haller, George

2014-01-01T23:59:59.000Z

232

Deadlock Avoidance Policies for Automated Manufacturing Systems Using Finite State Automata  

E-Print Network (OSTI)

Automata Spyros Reveliotis and Ahmed Nazeem1 1S. Reveliotis is with the School of Industrial & Systems product lines and more customized product offerings [22]. Indeed, since the beginning of the industrial revolution, automation has been at the core of the mass-production concept and practices, enabling activities

Reveliotis, Spiridon "Spyros"

233

Automated Solid-Phase Extraction Approaches for Large Scale Biomonitoring Studies  

Science Journals Connector (OSTI)

......specimens and reducing sample handling and labora- tory waste. Given...switching valve (see connection diagram in Figure 1). injection with...methods with minimal sample handling. References 1. L.L. Needham...Comparison of dif- ferent sorbent materials for on-line solid- phase......

Zsuzsanna Kuklenyik; Xiaoyun Ye; Larry L. Needham; Antonia M. Calafat

2009-01-01T23:59:59.000Z

234

Microsoft Word - CX-Franklin-BadgerCanyonGrandview-RedMtnsDisconnectSwitch_WEB.docx  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8, 2012 8, 2012 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Richard Heredia Project Manager - TEP-TPP-1 Proposed Action: Franklin-Badger Canyon and Grandview-Red Mountain switch replacements PP&A Project No.: 2,349 / 2,350 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance Location: Benton County, Washington Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: BPA proposes to replace disconnect switches and related equipment on the Franklin-Badger Canyon No.2 and Grandview-Red Mountain No.1 115- kilovolt transmission lines. The switch stands will be replaced in the same locations as the existing structures, and related load break equipment will be upgraded in-kind to existing. Both

235

Nanometer Resolution Imaging by SIngle Molecule Switching  

SciTech Connect

The fluorescence intensity of single molecules can change dramatically even under constant laser excitation. The phenomenon is frequently called "blinking" and involves molecules switching between high and low intensity states.[1-3] In additional to spontaneous blinking, the fluorescence of some special fluorophores, such as cyanine dyes and photoactivatable fluorescent proteins, can be switched on and off by choice using a second laser. Recent single-molecule spectroscopy investigations have shed light on mechanisms of single molecule blinking and photoswitching. This ability to controllably switch single molecules led to the invention of a novel fluorescence microscopy with nanometer spatial resolution well beyond the diffraction limit.

Hu, Dehong; Orr, Galya

2010-04-02T23:59:59.000Z

236

Automated Export Control.PDF  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 3 I N S P E C T I O N R E P O R T U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF INSPECTIONS INSPECTION OF THE DEPARTMENT OF ENERGY'S AUTOMATED EXPORT CONTROL SYSTEM DECEMBER 2001 U.S. DEPARTMENT OF ENERGY Washington, DC 20585 December 7, 2001 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman /s/ Inspector General SUBJECT: INFORMATION: Report on "Inspection of the Department of Energy's Automated Export Control System" BACKGROUND The National Defense Authorization Act for Fiscal Year 2000 (NDAA for FY 2000) contained a provision that not later than March 30 of each year the President will submit to Congress, beginning in the year 2000 and ending in the year 2007, an annual report on the Government's policies and procedures with respect to the export of technologies and technical information with

237

Automated Transportation Management System (ATMS)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Re evised June 2010 Re evised June 2010 Autom The Depa Transport an integra system al outbound air. Its ea 1989 DOE significant operationa commerce electronic rates, pre transporta users eva shipments opportunit logistics im ATMS is i radioactiv shipments System ATMS is a activities p packaging including materials. common s lading, fre * W * C S * A * H * E * * O 0 mated T artment of Ene tation Manage ated web-base lowing users freight shipm arly developm E Inspector G t opportunitie al efficiency t e. Today's sy cally prepare s pare shipping ation bills befo aluate carrier s, and use co ties for system mprovements ts capability t ve and other h s in a comple Modules a modular sys performed by g and transpo radioactive a . Its modules shipment info eight bills, rate System Web Applic Carrier Eval Selection Automated

238

Automated Demand Response and Commissioning  

SciTech Connect

This paper describes the results from the second season of research to develop and evaluate the performance of new Automated Demand Response (Auto-DR) hardware and software technology in large facilities. Demand Response (DR) is a set of activities to reduce or shift electricity use to improve the electric grid reliability and manage electricity costs. Fully-Automated Demand Response does not involve human intervention, but is initiated at a home, building, or facility through receipt of an external communications signal. We refer to this as Auto-DR. The evaluation of the control and communications must be properly configured and pass through a set of test stages: Readiness, Approval, Price Client/Price Server Communication, Internet Gateway/Internet Relay Communication, Control of Equipment, and DR Shed Effectiveness. New commissioning tests are needed for such systems to improve connecting demand responsive building systems to the electric grid demand response systems.

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Bourassa, Norman

2005-04-01T23:59:59.000Z

239

BEAM LINE  

NLE Websites -- All DOE Office Websites (Extended Search)

BEAM LINE BEAM LINE 45 W ILHELM ROENTGEN'S INITIAL DISCOVERY of X-radiation in 1895 led immediately to practical applications in medicine. Over the next few decades X rays proved to be an invaluable tool for the investigation of the micro-world of the atom and the development of the quantum theory of matter. Almost a century later, telescopes designed to detect X-radiation are indispensable for understanding the structure and evolution of the macro-world of stars, galaxies, and the Universe as a whole. The X-Ray Universe by WALLACE H. TUCKER X-ray images of the Universe are strikingly different from the usual visible-light images. 46 SUMMER 1995 did not think: I investigated." Undeterred by NASA's rejection of a proposal to search for cosmic X-radiation, Giacconi persuaded the

240

Integration of automation design information using XML technologies  

E-Print Network (OSTI)

Integration of automation design information using XML technologies Master of Science Thesis Mika UNIVERSITY OF TECHNOLOGY DEPARTMENT OF AUTOMATION #12;2 Abstract TAMPERE UNIVERSITY OF TECHNOLOGY Automation Degree Program Institute of Automation and Control Viinikkala, Mika: Integration of automation design

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Wind Power System Simulation of Switch Control  

Science Journals Connector (OSTI)

In order to find a balance between energy efficiency and reliability of wind power generation system, this paper presents a ... switch control strategy. This paper establishes a wind power system simulation model...

Yuehua Huang; Guangxu Li; Huanhuan Li

2014-01-01T23:59:59.000Z

242

Mercury switch with non-wettable electrodes  

DOE Patents (OSTI)

A mercury switch device comprising a pool of mercury and a plurality of electrical contacts made of or coated with a non-wettable material such as titanium diboride.

Karnowsky, Maurice M. (Albulquerque, NM); Yost, Frederick G. (Carlsbad, NM)

1987-01-01T23:59:59.000Z

243

Optoelectronic switching of addressable molecular crossbar junctions  

E-Print Network (OSTI)

This letter reports on the observation of optoelectronic switching in addressable molecular crossbar junctions fabricated using polymer stamp-printing method. The active medium in the junction is a molecular self-assembled monolayer softly sandwiched between gold electrodes. The molecular junctions are investigated through currentvoltage measurements at varied temperature (from 95 to 300 K) in high vacuum condition. The junctions show reversible optoelectronic switching with the highest on/off ratio of 3 orders of magnitude at 95 K. The switching behavior is independent of both optical wavelength and molecular structure, while it strongly depends on the temperature. Initial analysis indicates that the distinct binding nature of the molecule/electrode interfaces play a dominant role in the switching performance.

J. C. Li

2006-11-22T23:59:59.000Z

244

Alternative Fuels Data Center: Colonial Williamsburg Switches to  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Colonial Williamsburg Colonial Williamsburg Switches to Alternative Transportation to someone by E-mail Share Alternative Fuels Data Center: Colonial Williamsburg Switches to Alternative Transportation on Facebook Tweet about Alternative Fuels Data Center: Colonial Williamsburg Switches to Alternative Transportation on Twitter Bookmark Alternative Fuels Data Center: Colonial Williamsburg Switches to Alternative Transportation on Google Bookmark Alternative Fuels Data Center: Colonial Williamsburg Switches to Alternative Transportation on Delicious Rank Alternative Fuels Data Center: Colonial Williamsburg Switches to Alternative Transportation on Digg Find More places to share Alternative Fuels Data Center: Colonial Williamsburg Switches to Alternative Transportation on AddThis.com...

245

Definition: Distribution Automation Communications Network | Open Energy  

Open Energy Info (EERE)

Automation Communications Network Automation Communications Network Jump to: navigation, search Dictionary.png Distribution Automation Communications Network A communications network or networks designed to deliver control signals and information between distribution automation devices, and between these devices and utility grid control systems. These networks can utilize wired or wireless connections, and can be utility-owned or provided as services by a third party.[1] Related Terms distribution automation References ↑ https://www.smartgrid.gov/category/technology/distribution_automation_communications_network [[C LikeLike UnlikeLike You like this.Sign Up to see what your friends like. ategory: Smart Grid Definitionssmart grid,smart grid, |Template:BASEPAGENAME]]smart grid,smart grid, Retrieved from

246

Mobile home automation: merging mobile value added services and home automation technologies  

Science Journals Connector (OSTI)

In this paper we study mobile home automation, a field that emerges from an integration of mobile application platforms and home automation technologies. We motivate our research and provide ... options of how he...

Goetz Botterweck; J. Felix Hampe

2009-06-01T23:59:59.000Z

247

Automated Surface Observing System: Standby Power Options  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated Automated Surface Observing System Standby Options Power Automated Surface Observing System (ASOS) General System Description * Self contained group of sensors and data gathering equipment that produces an automated weather observation * Weather observations support aviation, climate data, non government weather operations, public consumption, etc. * Initial deployment began in 1991 and continued through 1997 * Located at 884 sites nationwide, normally at airports * System has two distinct subsystems: Field installed equipment (DCP & Sensor Group) and an indoor processor (ACU) with peripherals * Separate facility power for DCP & Sensors and ACU 1 * measure and collect data * Located on the airport * back up group for 10 minutes * Currently pl

248

An Automated Raman Device for Gout Diagnosis  

Science Journals Connector (OSTI)

This study reports an automated Raman device to identify crystals in synovial aspirates from patients with gout symptoms. Combined with sample preparation, the device could diagnose...

Li, Bolan

249

Distributed Automated Demand Response - Energy Innovation Portal  

NLE Websites -- All DOE Office Websites (Extended Search)

Transmission Find More Like This Return to Search Distributed Automated Demand Response Lawrence Livermore National Laboratory Contact LLNL About This Technology...

250

Substation automation gains momentum with modern options  

SciTech Connect

This paper discusses issues associated with utility substation automation. Monitoring equipment for monitoring power flow, quality, and harmonics for three substations simultaneously is described.

Beaty, W.

1996-12-01T23:59:59.000Z

251

Automated Logic Restructuring with aSPFDs  

Science Journals Connector (OSTI)

This chapter presents a comprehensive methodology to automate logic restructuring in combinational and sequential circuits. This technique algorithmically constructs the required transformation by utilizing a ...

Yu-Shen Yang; Subarna Sinha; Andreas Veneris

2011-01-01T23:59:59.000Z

252

Automated Transportation Management System (ATMS) | Department...  

Office of Environmental Management (EM)

of Energy's (DOE's) Automated Transportation Management System is an integrated web-based logistics management system allowing users to manage inbound and outbound freight...

253

Recommendation 207 : Automate the Stewardship Verification Process...  

Office of Environmental Management (EM)

recommends exploring ways to automate the stewardship tracking process and establish a web-based solution for managing long-term stewardship information for the Oak Ridge...

254

Integrated, Automated Distributed Generation Technologies Demonstration  

SciTech Connect

The purpose of the NETL Project was to develop a diverse combination of distributed renewable generation technologies and controls and demonstrate how the renewable generation could help manage substation peak demand at the ATK Promontory plant site. The Promontory plant site is located in the northwestern Utah desert approximately 25 miles west of Brigham City, Utah. The plant encompasses 20,000 acres and has over 500 buildings. The ATK Promontory plant primarily manufactures solid propellant rocket motors for both commercial and government launch systems. The original project objectives focused on distributed generation; a 100 kW (kilowatt) wind turbine, a 100 kW new technology waste heat generation unit, a 500 kW energy storage system, and an intelligent system-wide automation system to monitor and control the renewable energy devices then release the stored energy during the peak demand time. The original goal was to reduce peak demand from the electrical utility company, Rocky Mountain Power (RMP), by 3.4%. For a period of time we also sought to integrate our energy storage requirements with a flywheel storage system (500 kW) proposed for the Promontory/RMP Substation. Ultimately the flywheel storage system could not meet our project timetable, so the storage requirement was switched to a battery storage system (300 kW.) A secondary objective was to design/install a bi-directional customer/utility gateway application for real-time visibility and communications between RMP, and ATK. This objective was not achieved because of technical issues with RMP, ATK Information Technology Departments stringent requirements based on being a rocket motor manufacturing facility, and budget constraints. Of the original objectives, the following were achieved: Installation of a 100 kW wind turbine. Installation of a 300 kW battery storage system. Integrated control system installed to offset electrical demand by releasing stored energy from renewable sources during peak hours of the day. Control system also monitors the wind turbine and battery storage system health, power output, and issues critical alarms. Of the original objectives, the following were not achieved: 100 kW new technology waste heat generation unit. Bi-directional customer/utility gateway for real time visibility and communications between RMP and ATK. 3.4% reduction in peak demand. 1.7% reduction in peak demand was realized instead.

Jensen, Kevin

2014-09-30T23:59:59.000Z

255

Transmission line modeling with explicit grounding representation  

Science Journals Connector (OSTI)

This paper presents a new model of an overhead transmission line for electromagnetic transient computations. The unique feature of the model is the explicit representation of the tower grounding configuration and terminal substation grounds. Other properties of the model are: (1) accurate frequency dependent parameter representation from DC to several MHz; (2) explicit modeling of line asymmetries; and (3) high numerical efficiency. The model implementation is based on the solution of the transmission line differential equations resulting in a set of step response functions, forming a matrix. The step response matrix is utilized in a time domain simulation of electric power networks by a linear convolution scheme. The transmission line model is validated with actual system test data. The model is useful for computing the ground potential rise of transmission towers due to lightning or switching surges, insulation stress, etc. Typical applications are described in the paper.

G.J. Cokkinides; A.P.Sakis Meliopoulos

1988-01-01T23:59:59.000Z

256

Chapter 38, Design Automation for Microelectronics, Springer Handbook of Automation Deming Chen  

E-Print Network (OSTI)

Chapter 38, Design Automation for Microelectronics, Springer Handbook of Automation Deming Chen of hardware and software systems in the past several decades. CAD techniques are the key driving forces behind techniques. In this chapter we will introduce the fundamentals of design automation as an engineering field

Chen, Deming

257

Controlling the speed of Coding Line Conveyor using fuzzy logic  

Science Journals Connector (OSTI)

This paper presents performance improvement of a Coding Line Conveyer system (CLC), which is a key component of the automated parcels sorting complexes PP2000 used in logistics centers of Swiss Post. Normally, CLC operates with constant speed. The rules ... Keywords: control systems, fuzzy logic, parcels processing

Atanas Atanassov

2009-06-01T23:59:59.000Z

258

Automating Logical Preservation for Small Institutions with Hoppla  

E-Print Network (OSTI)

Automating Logical Preservation for Small Institutions with Hoppla Stephan Strodl, Petar Petrov and outsources digital preservation expertise. This paper presents the automated logical preservation process of automating logical preservation by outsourcing expertise. 1 Introduction Digital information form essential

259

Methods Development for On-Line Gas Chromatography  

Science Journals Connector (OSTI)

......for continuous process analysis and control imposes...development for on-line analysis are compared with those...switching methods to improve reliability and increase speed...design for speed of analysis while satisfying requirements...range (as in a batch reactor). (4) The sample......

Richard Villalobos

1990-07-01T23:59:59.000Z

260

Switching studies for the Horns Rev 2 wind farm C.F. Jensen, F. Faria da Silva , C.L. Bak, and W. Wiechowski  

E-Print Network (OSTI)

to replace the existing 132/150 kV overhead line system with HVAC power cables [4]. This introduces new reactive currents flowing through transmission lines and transformers. To compensate for the additional for switching studies in a system con- taining long HVAC cables. The transmission network connection to the 215

Silva, Filipe Faria Da

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

A Beamline for Fast Polarization Switching at NSLS-II  

SciTech Connect

The first XUV beamline (200-2000 eV) at NSLS-II will have two branches, one optimized for photon hungry experiments requiring high coherent flux and one optimized for studies of polarization sensitive materials and interfaces based on fast polarization switching. We describe here the branch designed for fast polarization switching with frequencies up to 1 kHz, high photon flux, and good energy resolution. The beamline will be served by two canted undulators and is based on the focusing variable line spacing grating monochromator. The two beams will be focused at the same spot of approximately 80x10 {mu}m (hor.xver.). The expected circular polarized flux at the sample from each device up to 1.4 keV will be higher than 10{sup 12} photons/s at a resolving power better than 10{sup 4}. An additional KB focusing system will deliver the two beams to a spot in the {mu}m range.

Reininger, R.; Sanchez-Hanke, C.; Hulbert, S. L. [NSLS and NSLS-II, Brookhaven National Laboratory, Upton, New York 11973 (United States)

2010-06-23T23:59:59.000Z

262

Video Switching in the Panopto Editor Video Switching in the Panopto Editor  

E-Print Network (OSTI)

Video Switching in the Panopto Editor Video Switching in the Panopto Editor In My Pitt Video (Panopto) you can control and edit which video streams the viewer sees by editing individual streams in the My Pitt Video (Panopto) Editor. Editing the primary video source will edit on all streams, editing

Benos, Panayiotis "Takis"

263

Automated Critical Peak Pricing Field Tests: 2006 Pilot Program Description and Results  

E-Print Network (OSTI)

Target Hayward Software client Automated Logic TargetAntioch Automated Logic Target Bakersfield Software client

Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila

2007-01-01T23:59:59.000Z

264

Investigation of broadband over power line channel capacity of shipboard power system cables for ship communications networks  

E-Print Network (OSTI)

Broadband over Power Line (BPL) technology has garnered significant attention lately due to recent advancements in solid state technologies and channel coding schemes. The successful application of BPL technology for in-home automation...

Akinnikawe, Ayorinde

2009-05-15T23:59:59.000Z

265

Nucleic Acid Content and Nuclear Chromatin Structure of Human Bladder Cell Culture Lines as Studied by Flow Cytofluorometry  

Science Journals Connector (OSTI)

...characterizing tissue culture cell lines, as we have done home,and perhaps in distinguishing benign and malignant epithelial...Sharpless, T., and Darzynkiewicz, z. Urinary Cytology Automation. Preliminary Studies with Acridine Orange Stain and Flow-Through...

Myron R. Melamed; Zbigniew Darzynkiewicz; Frank Traganos; and Thomas K. Sharpless

1977-04-01T23:59:59.000Z

266

Open Automated Demand Response Communications Specification (Version 1.0)  

E-Print Network (OSTI)

and Techniques for Demand Response. May 2007. LBNL-59975.tofacilitateautomating demandresponseactionsattheInteroperable Automated Demand Response Infrastructure,

Piette, Mary Ann

2009-01-01T23:59:59.000Z

267

Open Automated Demand Response Dynamic Pricing Technologies and Demonstration  

E-Print Network (OSTI)

Goodin. 2009. Open Automated Demand Response Communicationsin Demand Response for Wholesale Ancillary Services. InOpen Automated Demand Response Demonstration Project. LBNL-

Ghatikar, Girish

2010-01-01T23:59:59.000Z

268

Home Automation : Smart home technology and template house design.  

E-Print Network (OSTI)

??In this thesis, home automations general knowledge, technology information and each component will be introduced to the reader in the first half of the whole (more)

Zheng, Zeya

2013-01-01T23:59:59.000Z

269

V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities July 29, 2013...

270

U-047: Siemens Automation License Manager Bugs Let Remote Users...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7: Siemens Automation License Manager Bugs Let Remote Users Deny Service or Execute Arbitrary Code U-047: Siemens Automation License Manager Bugs Let Remote Users Deny Service or...

271

Appropriate automation of rail signalling systems: a human factors study.  

E-Print Network (OSTI)

??This thesis examines the effect of automation in the rail signalling environment. The level of automation in a system can be described as ranging along (more)

Balfe, Nora

2010-01-01T23:59:59.000Z

272

Automation of amperometric titrations with rotating platinum electrodes  

Science Journals Connector (OSTI)

Automation of amperometric titrations with rotating platinum electrodes ... A modification of an earlier described apparatus allows for the automation of amperometric titrations with rotating platinum electrodes. ...

Eugene D. Olsen; Roger D. Walton

1966-01-01T23:59:59.000Z

273

V-132: IBM Tivoli System Automation Application Manager Multiple...  

Energy Savers (EERE)

32: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities V-132: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities April 12, 2013 -...

274

ISA Approves Standard for Wireless Automation in Process Control...  

NLE Websites -- All DOE Office Websites (Extended Search)

ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications On September 9, the...

275

Small- and Medium-Size Building Automation and Control System...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Emerging...

276

An evaluation of Access Tier local area network switches.  

SciTech Connect

This reports tabulates the Test and Evaluation results of the Access Class Switch tests conducted by members of Department 9336. About 15 switches were reviewed for use in the enterprise network as access tier switches as defined in a three tier architecture. The Access Switch Tier has several functions including: aggregate customer desktop ports, preserve and apply QoS tags, provide switched LAN access, provide VLAN assignment, as well as others. The typical switch size is 48 or less user ports. The evaluation team reviewed network switch evaluation reports from the Tolly Group as well as other sources. We then used these reports as a starting point to identify particular switches for evaluation. In general we reviewed the products of dominant equipment manufacturers. Also, based on architectural design requirements, the majority of the switches tested were of relatively small monolithic unit variety.

Eldridge, John M.; Olsberg, Ronald R.

2004-06-01T23:59:59.000Z

277

Demand Response and Open Automated Demand Response  

E-Print Network (OSTI)

LBNL-3047E Demand Response and Open Automated Demand Response Opportunities for Data Centers G described in this report was coordinated by the Demand Response Research Center and funded by the California. Demand Response and Open Automated Demand Response Opportunities for Data Centers. California Energy

278

Atlas Sodium Automated Batch Synthesis System  

E-Print Network (OSTI)

Atlas Sodium Automated Batch Synthesis System (Syrris) June 2013 #12;Introduction to the system · The Atlas Sodium system consists of an Atlas base equipped with a 400ºC hotplate, a stacking dry bath systemL) for automated addition and/or removal of solution. · The system is computer controlled by the Atlas software

Subramanian, Venkat

279

PeopleSoft HR ECR Automation Process  

E-Print Network (OSTI)

PeopleSoft HR ECR Automation Process Short Term Disability with Pay May 2011 #12;Processing a Short Term Disability with Pay ECR Search Page To process a Short Term Disability using the automated ECR process, follow the menu navigation below: Home > Employee Change Request (ECR) > Use > ECR Create

Huang, Jianyu

280

PeopleSoft HR ECR Automation Process  

E-Print Network (OSTI)

PeopleSoft HR ECR Automation Process Revise Existing SWB May 2011 #12;Processing a Short Work Break Date Revision ECR Search Page To process a Short Work Break Date revision using the automated ECR process, follow the menu navigation below: Home > Employee Change Request (ECR) > Use > ECR Create

Huang, Jianyu

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

PeopleSoft HR ECR Automation Process  

E-Print Network (OSTI)

PeopleSoft HR ECR Automation Process Employee Work Hours Change (Temporary Basis) May 2012 #12 Documentation May, 2012 When the Originator is ready to create an Hours Change Request using the automated ECR the instructions below: - Home > Employee Change Request (ECR) > Use > ECR Create · If you know the Name or Eagle

Huang, Jianyu

282

PeopleSoft HR ECR Automation Process  

E-Print Network (OSTI)

PeopleSoft HR ECR Automation Process Long Term Disability May 2011 #12;Processing a Long Term Disability LTD ECR Search Page To process an LTD transaction using the automated ECR process, follow the menu navigation below: Home > Employee Change Request (ECR) > Use > ECR Create 2 · If you know the Name or Eagle

Huang, Jianyu

283

PeopleSoft HR ECR Automation Process  

E-Print Network (OSTI)

PeopleSoft HR ECR Automation Process Leave of Absence May 2012 #12;2 Table of Contents Create the Originator is ready to create a Leave of Absence using the automated ECR process, he/she will follow the menu navigation below to access the employee search page and then use the instructions below: - Home > Employee

Huang, Jianyu

284

Technical University of Denmark rsted DTU Automation  

E-Print Network (OSTI)

Technical University of Denmark ?rsted · DTU Automation Project: SICAM - SIngle Conversion stage;Isolated PDM and PWM DC-AC SICAMs Petar Ljusev, MSc., Ph.D. student, ?rsted · DTU Automation e-mail: pl

285

D Riso-R-429 Automated Uranium  

E-Print Network (OSTI)

routinely used analytical techniques for uranium determina- tions in geological samples, fissionCM i D Riso-R-429 Automated Uranium Analysis by Delayed-Neutron Counting H. Kunzendorf, L. Løvborg AUTOMATED URANIUM ANALYSIS BY DELAYED-NEUTRON COUNTING H. Kunzendorf, L. Løvborg and E.M. Christiansen

286

Photonic switching devices based on semiconductor nanostructures  

E-Print Network (OSTI)

Focusing and guiding light into semiconductor nanostructures can deliver revolutionary concepts for photonic devices, which offer a practical pathway towards next-generation power-efficient optical networks. In this review, we consider the prospects for photonic switches using semiconductor quantum dots (QDs) and photonic cavities which possess unique properties based on their low dimensionality. The optical nonlinearity of such photonic switches is theoretically analyzed by introducing the concept of a field enhancement factor. This approach reveals drastic improvement in both power-density and speed, which is able to overcome the limitations that have beset conventional photonic switches for decades. In addition, the overall power consumption is reduced due to the atom-like nature of QDs as well as the nano-scale footprint of photonic cavities. Based on this theoretical perspective, the current state-of-the-art of QD/cavity switches is reviewed in terms of various optical nonlinearity phenomena which have been utilized to demonstrate photonic switching. Emerging techniques, enabled by cavity nonlinear effects such as wavelength tuning, Purcell-factor tuning and plasmonic effects are also discussed.

Chao-Yuan Jin; Osamu Wada

2014-02-26T23:59:59.000Z

287

6.1-MV, 0.79-MA laser-triggered gas switch for multimodule, multiterawatt pulsed-power accelerators  

Science Journals Connector (OSTI)

A 6.1-MV, 0.79-MA laser-triggered gas switch (LTGS) is used to synchronize the 36 modules of the Z machine at Sandia National Laboratories. Each module includes one switch, which serves as the last command-fired switch of the module, and hence is used to determine the time at which each module electrically closes relative to the other modules. The switch is ?81-cm in length, ?45-cm in diameter, and is immersed in mineral oil. The outer switch envelope consists of six corrugated monomer-cast acrylic insulators and five contoured stainless-steel rings. The trigger electrodes are fabricated from copper-infused tungsten. The switch is pressurized with several atmospheres of sulfur hexafluoride (SF6), which is turbulently purged within 2seconds after every shot. Each switch is powered from a 6-MV, 0.78-MJ Marx generator which pulse charges a 24-nF intermediate-store water capacitor in 1.4-?s. Closure of the switch allows power to flow into pulse-forming transmission lines. The power pulse is subsequently compressed by water switches, which results in a total accelerator output power in excess of 70-TW. A previous version of the LTGS performed exceptionally at a 5.4-MV, 0.7-MA level on an engineering test module used for switch development. It exhibited a 1-? jitter of ?5??ns, a prefire and flashover rate less than 0.1%, and a lifetime in excess of 150 shots. When installed on the Z accelerator, however, the switch exhibited a prefire probability of ?3%, a flashover probability of ?7%, and a 15-ns jitter. The difference in performance is attributed to several factors such as higher total charge transfer, exposure to more debris, and more stressful dynamic mechanical loading upon machine discharge. Under these conditions, the replacement lifetime was less than ten shots. Since refurbishment of Z in October2007, there have been three LTGS design iterations to improve the performance at 6.1-MV. The most recent design exhibits a prefire rate of less than 0.1%, a flashover rate of ?0.2%, a single switch jitter of ?6-ns, and a lifetime of greater than 75 shots. Modifications to achieve the performance improvement are detailed in this article.

K. R. LeChien; W. A. Stygar; M. E. Savage; P. E. Wakeland; V. Anaya; D. S. Artery; M. J. Baremore; D. E. Bliss; R. Chavez; G. D. Coombs; J. P. Corley; P. A. Jones; A. K. Kipp; B. A. Lewis; J. A. Lott; J. J. Lynch; G. R. McKee; S. D. Ploor; K. R. Prestwich; S. A. Roznowski; D. C. Spencer; S. D. White; J. R. Woodworth

2010-03-24T23:59:59.000Z

288

Optimization of automation: I. Estimation method of cognitive automation rates reflecting the effects of automation on human operators in nuclear power plants  

Science Journals Connector (OSTI)

Abstract Since automation was introduced in various industrial fields, the concept of the automation rate has been used to indicate the inclusion proportion of automation among all work processes or facilities. Expressions of the inclusion proportion of automation are predictable, as is the ability to express the degree of the enhancement of human performance. However, many researchers have found that a high automation rate does not guarantee high performance. Therefore, to reflect the effects of automation on human performance, this paper proposes a new estimation method of the automation rate that considers the effects of automation on human operators in nuclear power plants (NPPs). Automation in \\{NPPs\\} can be divided into two types: system automation and cognitive automation. Some general descriptions and characteristics of each type of automation are provided, and the advantages of automation are investigated. The advantages of each type of automation are used as measures of the estimation method of the automation rate. One advantage was found to be a reduction in the number of tasks, and another was a reduction in human cognitive task loads. The system and the cognitive automation rate were proposed as quantitative measures by taking advantage of the aforementioned benefits. To quantify the required human cognitive task loads and thus suggest the cognitive automation rate, Conants information-theory-based model was applied. The validity of the suggested method, especially as regards the cognitive automation rate, was proven by conducting experiments. The result showed that a decreased rate of the operator working time was significantly related to the cognitive automation rate and that the calculation of the cognitive task load was useful as a measure of the cognitive automation rate.

Seung Min Lee; Jong Hyun Kim; Poong Hyun Seong

2014-01-01T23:59:59.000Z

289

Automation of hydroelectric power plants  

SciTech Connect

This paper describes how the author's company has been automating its hydroelectric generating plants. The early automations were achieved with a relay-type supervisory control system, relay logic, dc tachometer, and a pneumatic gate-position controller. While this system allowed the units to be started and stopped from a remote location, they were operated at an output that was preset by the pneumatic control at the generating site. The supervisory control system at the site provided such information as unit status, generator breaker status, and a binary coded decimal (BCD) value of the pond level. The generating units are started by energizing an on-site relay that sets the pneumatic gate controller to a preset value above the synchronous speed of the hydroelectric generator. The pneumatic controller then opens the water-wheel wicket gates to the preset startup position. As the hydroelectric generator starts to turn, the machine-mounted dc tachometer produces a voltage. At a dc voltage equivalent to synchronous speed, the generator main breaker closes, and a contact from the main breaker starts a field-delay timer. Within a few seconds, the field breaker closes. Once the cycle is complete, a relay changes the pneumatic setpoint to a preset operating point of about 8/10 wicket gate opening.

Grasser, H.S. (Consolidated Papers, Inc., Wisconsin Rapids, WI (US))

1990-03-01T23:59:59.000Z

290

Solar Automation Inc | Open Energy Information  

Open Energy Info (EERE)

Inc Inc Jump to: navigation, search Name Solar Automation Inc Place Albuquerque, New Mexico Zip NM 8110 Product Produces manufacturing equipment for PV cells. References Solar Automation Inc[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Solar Automation Inc is a company located in Albuquerque, New Mexico . References ↑ "Solar Automation Inc" Retrieved from "http://en.openei.org/w/index.php?title=Solar_Automation_Inc&oldid=351247" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes Special pages Printable version Permanent link Browse properties About us Disclaimers Energy blogs Linked Data Developer services

291

Substation automation -- a ``bottoms up`` approach  

SciTech Connect

The proliferation of multi-purpose intelligent electronic devices in substations brought the availability of abundant and often overlapping data at the substation. This data can be used for improving the operation and maintenance of the substations and the entire power system. The objective of substation automation is to use technology to gather, consolidate and utilize this data for increasing the efficiency of power system operation and maintenance. Often automation functions are developed and offered around the capabilities of the preferred hardware and software of the integrator. Emphasis is placed on hardware, software and communication protocols rather than need, methodology and application. This can result in over-automation with complex, expensive and ineffective systems, or under-automation that fails to achieve the user`s objectives. The objective is to select appropriate hardware, software and methodology to build the most cost effective system to get the desired results. This paper describes steps to ensure the successful implementation of substation automation.

Thomas, J. [General Electric, Malvern, PA (United States)

1996-10-01T23:59:59.000Z

292

Dynamic Whitelist Generation for Automated Response  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Methodology Methodology Results Dynamic Whitelist Generation for Automated Response Chris Strasburg, Josh Adams Ames Laboratory, US DOE cstras@ameslab.gov, jadams@ameslab.gov The Ames Laboratory, US DOE 1 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results Outline 1 Introduction About Ames Laboratory Motivation 2 Methodology Data Classifiers Experiments 3 Results The Ames Laboratory, US DOE 2 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results About Ames Laboratory Motivation Ames Physical Environment The Ames Laboratory, US DOE 3 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results About Ames Laboratory Motivation Ames Network Environment The Ames Laboratory, US DOE 4 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results About Ames

293

Explosive-driven, high speed, arcless switch  

DOE Patents (OSTI)

An explosive-actuated, fast-acting arcless switch contains a highly conductive foil to carry high currents positioned adjacent a dielectric surface within a casing. At one side of the foil opposite the dielectric surface is an explosive which, when detonated, drives the conductive foil against the dielectric surface. A pattern of grooves in the dielectric surface ruptures the foil to establish a rupture path having a pattern corresponding to the pattern of the grooves. The impedance of the ruptured foil is greater than that of the original foil to divert high current to a load. Planar and cylindrical embodiments of the switch are disclosed.

Skogmo, P.J.; Tucker, T.J.

1986-05-02T23:59:59.000Z

294

Explosive-driven, high speed, arcless switch  

DOE Patents (OSTI)

An explosive-actuated, fast-acting arcless switch contains a highly conductive foil to carry high currents positioned adjacent a dielectric surface within a casing. At one side of the foil opposite the dielectric surface is an explosive which, when detonated, drives the conductive foil against the dielectric surface. A pattern of grooves in the dielectric surface ruptures the foil to establish a rupture path having a pattern corresponding to the pattern of the grooves. The impedance of the ruptured foil is greater than that of the original foil to divert high current to a load. Planar and cylindrical embodiments of the switch are disclosed. 7 figs.

Skogmo, P.J.; Tucker, T.J.

1987-07-14T23:59:59.000Z

295

AUTOMATING GROUNDWATER SAMPLING AT HANFORD  

SciTech Connect

Until this past October, Fluor Hanford managed Hanford's integrated groundwater program for the U.S. Department of Energy (DOE). With the new contract awards at the Site, however, the CH2M HILL Plateau Remediation Company (CHPRC) has assumed responsibility for the groundwater-monitoring programs at the 586-square-mile reservation in southeastern Washington State. These programs are regulated by the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response Compensation and Liability Act (CERCLA). The purpose of monitoring is to track existing groundwater contamination from past practices, as well as other potential contamination that might originate from RCRA treatment, storage, and disposal (TSD) facilities. An integral part of the groundwater-monitoring program involves taking samples of the groundwater and measuring the water levels in wells scattered across the site. More than 1,200 wells are sampled each year. Historically, field personnel or 'samplers' have been issued pre-printed forms that have information about the well(s) for a particular sampling evolution. This information is taken from the Hanford Well Information System (HWIS) and the Hanford Environmental Information System (HEIS)--official electronic databases. The samplers used these hardcopy forms to document the groundwater samples and well water-levels. After recording the entries in the field, the samplers turned the forms in at the end of the day and the collected information was posted onto a spreadsheet that was then printed and included in a log book. The log book was then used to make manual entries of the new information into the software application(s) for the HEIS and HWIS databases. This is a pilot project for automating this tedious process by providing an electronic tool for automating water-level measurements and groundwater field-sampling activities. The automation will eliminate the manual forms and associated data entry, improve the accuracy of the information recorded, and enhance the efficiency and sampling capacity of field personnel. The goal of the effort is to eliminate 100 percent of the manual input to the database(s) and replace the management of paperwork by the field and clerical personnel with an almost entirely electronic process. These activities will include the following: scheduling the activities of the field teams, electronically recording water-level measurements, electronically logging and filing Groundwater Sampling Reports (GSR), and transferring field forms into the site-wide Integrated Document Management System (IDMS).

CONNELL CW; HILDEBRAND RD; CONLEY SF; CUNNINGHAM DE

2009-01-16T23:59:59.000Z

296

Automated cleaning of electronic components  

SciTech Connect

Environmental and operator safety concerns are leading to the elimination of trichloroethylene and chlorofluorocarbon solvents in cleaning processes that remove rosin flux, organic and inorganic contamination, and particulates from electronic components. Present processes depend heavily on these solvents for manual spray cleaning of small components and subassemblies. Use of alternative solvent systems can lead to longer processing times and reduced quality. Automated spray cleaning can improve the quality of the cleaning process, thus enabling the productive use of environmentally conscious materials, while minimizing personnel exposure to hazardous materials. We describe the development of a prototype robotic system for cleaning electronic components in a spray cleaning workcell. An important feature of the prototype system is the capability to generate the robot paths and motions automatically from the CAD models of the part to be cleaned, and to embed cleaning process knowledge into the automatically programmed operations.

Drotning, W.; Meirans, L.; Wapman, W.; Hwang, Y.; Koenig, L.; Petterson, B.

1994-07-01T23:59:59.000Z

297

The Application of Switched Reluctance Motor in Electric Screw Press  

Science Journals Connector (OSTI)

With computer technology, power electronics, digital control technology, a new type of power system - Switched Reluctance Motor Drives (Switched Reluctance Driver, referred to as SRD) came into being, it is ba...

Zhang Fangyang; Ruan Feng

2011-01-01T23:59:59.000Z

298

Low voltage amplifier architecture for high speed switched capacitor circuits  

E-Print Network (OSTI)

This work concentrates on circuit realization of high speed and low voltage switched capacitor circuits, with emphasis on the operational transconductance amplifier (OTA). An overview of switched capacitor circuits is given. Speed and voltage...

Shankar, Asit

2012-06-07T23:59:59.000Z

299

A SIP-based Home Automation Platform: an Experimental Study  

E-Print Network (OSTI)

A SIP-based Home Automation Platform: an Experimental Study Benjamin Bertran, Charles Consel INRIA the requirements of home automation; we present the resulting architecture of a home automation system; and, we to tackle the challenges of the home automation domain. In this paper we present an approach and a platform

Boyer, Edmond

300

Fueling Robot Automates Hydrogen Hose Reliability Testing (Fact Sheet)  

SciTech Connect

Automated robot mimics fueling action to test hydrogen hoses for durability in real-world conditions.

Harrison, K.

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Design and experimental results on a terawatt magnetically controlled plasma opening switch  

SciTech Connect

The magnetically controlled plasma opening switch (MCPOS) is an advanced plasma opening switch that utilizes magnetic fields to improve operation. Magnetic fields always dominate terawatt, pulsed power plasma opening switches. For that reason, the MCPOS uses controlled applied magnetic fields with magnitude comparable to the self-magnetic field of the storage inductor. One applied field holds the plasma in place while energy accumulates in the storage inductor, then another applied field pushes the plasma away from the cathode to allow energy to flow downstream. Over a ten month period, an MCPOS was designed, built, and tested on DECADE Module 2 at Physics International. The peak drive current was 1.8 MA in 250 ns. The output parameters were up to 1 MA into an electron beam load. The radiation temporal pulse width averaged 60 nanoseconds full-width at half-maximum. The peak load voltage ranged from one to two megavolts. The experiments demonstrated efficient power flow through a long, low-impedance magnetically insulated transmission line between the magnetically controlled plasma opening switch and the load.

Savage, M.E.; Simpson, W.W.; Mendel, C.W. Jr.; McDaniel, D.H. [Sandia National Labs., Albuquerque, NM (United States); Levine, J.S.; Tucker, T.S. [Primex Physics International, San Leandro, CA (United States)

1998-05-01T23:59:59.000Z

302

FERROELECTRIC SWITCH FOR A HIGH-POWER Ka-BAND ACTIVE PULSE COMPRESSOR  

SciTech Connect

Results are presented for design of a high-power microwave switch for operation at 34.3 GHz, intended for use in an active RF pulse compressor. The active element in the switch is a ring of ferroelectric material, whose dielectric constant can be rapidly changed by application of a high-voltage pulse. As envisioned, two of these switches would be built into a pair of delay lines, as in SLED-II at SLAC, so as to allow 30-MW ?s-length Ka-band pulses to be compressed in time by a factor-of-9 and multiplied in amplitude to generate 200 MW peak power pulses. Such high-power pulses could be used for testing and evaluation of high-gradient mm-wave accelerator structures, for example. Evaluation of the switch design was carried out with an X-band (11.43 GHz) prototype, built to incorporate all the features required for the Ka-band version.

Hirshfield, Jay L. [Omega-P, Inc.] [Omega-P, Inc.

2013-12-18T23:59:59.000Z

303

Passive Q-switching instability and bistability of a N/sub 2/O laser with intracavity saturable absorber  

SciTech Connect

Several types of instabilities in passive Q switching and optical bistability are observed in a number of 10-/mu/m laser lines in a N/sub 2/O laser with intracavity saturable absorbers such as NH/sub 3/, SF/sub 6/, C/sub 2/H/sub 4/, C/sub 2/H/sub 3/Cl, and CCl/sub 2/F/sub 2/. The observed pulse shapes are reproduced well by a calculation based on the recently proposed rate-equation model. Characteristic dependences of passive Q switching and bistability on the laser parameters are explained with a phase diagram derived theoretically.

Hong, F.; Tachikawa, M.; Li, B.; Shimizu, T.

1988-11-01T23:59:59.000Z

304

Automated Data Quality Analysis Research and Development  

E-Print Network (OSTI)

DOCUMENTATION 4.0 FUTURE DIRECTIONS 5.0 SUMMARY 6.0 CODE 1 2 3 5 5 12 17 17 18 February 2002, Final Report Energy Systems Laboratory, Texas A&M University p. 5 1.0 INTRODUCTION The Automated Data Quality process development is an effort to automate the analysis.... Automation of the "lower-level" data quality checking will enabled a more refined review process. Figure 1. Energy Core Polling and Reloading Process Diagram February 2002, Final Report Energy Systems Laboratory, Texas A&M University p. 6 2.2 Definitions...

Sweeney, J., Jr.; Haberl, J. S.

2002-01-01T23:59:59.000Z

305

j5 DNA Assembly Design Automation Software  

Science Journals Connector (OSTI)

j5 DNA Assembly Design Automation Software ... Here, we report the development and deployment of a web-based software tool, j5, which automates the design of scar-less multipart DNA assembly protocols including SLIC, Gibson, CPEC, and Golden Gate. ... The key innovations of the j5 design process include cost optimization, leveraging DNA synthesis when cost-effective to do so, the enforcement of design specification rules, hierarchical assembly strategies to mitigate likely assembly errors, and the instruction of manual or automated construction of scar-less combinatorial DNA libraries. ...

Nathan J. Hillson; Rafael D. Rosengarten; Jay D. Keasling

2011-12-07T23:59:59.000Z

306

Optically initiated silicon carbide high voltage switch  

DOE Patents (OSTI)

An improved photoconductive switch having a SiC or other wide band gap substrate material, such as GaAs and field-grading liners composed of preferably SiN formed on the substrate adjacent the electrode perimeters or adjacent the substrate perimeters for grading the electric fields.

Caporaso, George J. (Livermore, CA); Sampayan, Stephen E. (Manteca, CA); Sullivan, James S. (Livermore, CA); Sanders; David M. (Livermore, CA)

2011-02-22T23:59:59.000Z

307

Mechanism of Magnetic Relaxation Switching Sensing  

Science Journals Connector (OSTI)

Mechanism of Magnetic Relaxation Switching Sensing ... H.S. acknowledges financial support from the B.S.-Ph.D. National Science Scholarship awarded by the Agency for Science, Technology and Research, Singapore. ... sciences share a common interest in small structures (the definition of 'small' depends on the application, but can range from 1 nm to 1 mm). ...

Changwook Min; Huilin Shao; Monty Liong; Tae-Jong Yoon; Ralph Weissleder; Hakho Lee

2012-07-04T23:59:59.000Z

308

Thermionic converter in load-switching mode  

SciTech Connect

An electrical equivalent circuit is proposed for a thermionic electrogenerating element. It is suitable for calculation of transients in load-switching mode. Formulas are given for estimating circuit parameters. A sample numerical calculation is given for the transient between no-load and short-circuit regimes. The results may be employed to identify experimental data in the frequency domain.

Mendel'baum, M.A.; Es'kov, V.D.

1983-01-01T23:59:59.000Z

309

Invertibility of Nonlinear Switched Systems Aneel Tanwani and Daniel Liberzon  

E-Print Network (OSTI)

Invertibility of Nonlinear Switched Systems Aneel Tanwani and Daniel Liberzon Abstract-- This article addresses the invertibility problem for switched nonlinear systems affine in controls. The problem and sufficient condition for a switched system to be invertible, which says that the subsystems should

310

OPTICAL PACKET SWITCHING George N. Rouskas, Lisong Xu  

E-Print Network (OSTI)

Chapter 1 OPTICAL PACKET SWITCHING George N. Rouskas, Lisong Xu Department of Computer Science of optical packet switching (OPS) is emerging as an alter- native to coarser-grained switching in the optical reconfigurable, bandwidth-efficient, and flexible optical layer. In this chapter we study some

311

Four Phase Switched Reluctance Motor Direct Torque Control  

Science Journals Connector (OSTI)

The three-phase switched reluctance motor direct torque control method mostly is a simple transplantation of the three-phase AC asynchronous motor direct torque control method, not suitable for arbitrary-phase switched reluctance motor. In this paper, ... Keywords: SRM, Direct torque control, Flux vector, Voltage vector, Switched rule

Wang Mianhua

2011-01-01T23:59:59.000Z

312

E-Print Network 3.0 - artificial molecular switch Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

variation in which they evade immunity by switching... transmission. mathematical model Typanosoma brucei variant surface glycoprotein switching hierarchy Source: Read,...

313

Level of Automation Effects on Situation Awareness and Functional Specificity in Automation Reliance.  

E-Print Network (OSTI)

??This thesis investigates the relationships between performance, workload, and situation awareness at varying levels of automation. The relationships observed in this study are compared to (more)

Smith, Adam

2012-01-01T23:59:59.000Z

314

Application and field experience of a digital substation switch  

SciTech Connect

There has been an increase in the use of solid-state, microprocessor-based relays, fault recorders, meters, and programmable controllers; in transmission and distribution substations. These devices can be remotely interrogated or programmed, and can send reports back to a host computer through their RS-232 communications ports. These devices use a wide variety of communications software and protocols. Because these devices can be located in the substation yard, induced surges and voltages can be present on the communication lines. This can impair the ability to communicate over RS-232 lines, and even cause equipment damage. In addition. the distance from the control house to the substation yard can limit the use of standard RS-232 protocol. For greater system economy, several devices must use the same communications channel. This requires a means of reliably connecting several devices to the incoming and outgoing communications circuits. This paper describes a digital substation switch (DSS) that was designed for this application, and its initial installation and field experience at Savannah Electric. The DSS connects various meters, transmission relays, and distribution relays to PCs in remote locations through a voice-grade telephone circuit. In this application, the DSS uses a fiber loop to communicate with the devices in the substation yard.

Spain, R.; Fodero, K.

1994-12-31T23:59:59.000Z

315

LANL to certify automated influenza surveillance system  

NLE Websites -- All DOE Office Websites (Extended Search)

LANL to certify automated influenza surveillance system LANL to certify automated influenza surveillance system LANL to certify automated influenza surveillance system A compact automated system for surveillance and screening of potential pandemic strains of influenza and other deadly infectious diseases is a step closer to reality. January 31, 2011 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy

316

Automated intrusion recovery for web applications  

E-Print Network (OSTI)

In this dissertation, we develop recovery techniques for web applications and demonstrate that automated recovery from intrusions and user mistakes is practical as well as effective. Web applications play a critical role ...

Chandra, Ramesh, Ph. D. Massachusetts Institute of Technology

2013-01-01T23:59:59.000Z

317

Preface: Cognitive Engineering in Automated Systems Design  

E-Print Network (OSTI)

Preface: Cognitive Engineering in Automated Systems Design This special issue was motivated by an apparent paucity of research on applications of cognitive engineering principles in the design of complex systems including mainte- nance, manufacturing, and transportation systems. Cognitive engineering

Kaber, David B.

318

Honeywell modular automation system computer software documentation  

SciTech Connect

This document provides a Computer Software Docuemntation for a new Honeywell Modular Automation System (MAS) being installed in the Plutonium Finishing Plant (PFP). This system will be used to control new thermal stabilization furnaces in HA-21I.

Cunningham, L.T.

1997-01-20T23:59:59.000Z

319

ZigBee Smart Home Automation Systems  

Science Journals Connector (OSTI)

This chapter summarizes a completed UK government funded project, the indeedNET ZigBee home automation system, which heralds a milestone in the ... energy saving devices with the potential to help home owners and...

Shuang-Hua Yang

2014-01-01T23:59:59.000Z

320

Graphic update of automated logic diagrams  

Science Journals Connector (OSTI)

The Automated Logic Diagram, or ALD, is a well defined document prepared by engineers to specify the design of a machine. 1 The document is coded for computer input by highly trained transcription personnel. Changes or corrections ...

Richard J. Uhlik

1968-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Distributed Intelligent Automated Demand Response (DIADR) Building  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Distributed Intelligent Automated Demand Distributed Intelligent Automated Demand Response (DIADR) Building Management System Distributed Intelligent Automated Demand Response (DIADR) Building Management System The U.S. Department of Energy (DOE) is currently conducting research into distributed intelligent-automated demand response (DIADR) building management systems. Project Description This project aims to develop a DIADR building management system with intelligent optimization and control algorithms for demand management, taking into account a multitude of factors affecting cost including: Comfort Heating, ventilating, and air conditioning (HVAC) Lighting Other building systems Climate Usage and occupancy patterns. The key challenge is to provide the demand response the ability to address more and more complex building systems that include a variety of loads,

322

Design automation for microfluidics-based biochips  

Science Journals Connector (OSTI)

Advances in microfluidics technology offer exciting possibilities in the realm of enzymatic analysis, DNA analysis, proteomic analysis involving proteins and peptides, immunoassays, implantable drug delivery devices, and environmental toxicity monitoring. ... Keywords: Microfluidics, biochips, design automation

Krishnendu Chakrabarty; Jun Zeng

2005-10-01T23:59:59.000Z

323

Automating Logic Rectification by Approximate SPFDs  

Science Journals Connector (OSTI)

In the digital VLSI cycle, a netlist is often modified to correct design errors, perform small specification changes or implement incremental rewiring-based optimization operations. Most existing automated logic rectification tools use a small set of ... Keywords: SAT-based algorithm, approximate SPFD, digital VLSI cycle, design errors, incremental rewiring-based optimization operations, automated logic rectification tools, predefined logic transformations, memory/time explosion problem

Yu-Shen Yang; S. Sinha; A. Veneris; R. K. Brayton

2007-01-01T23:59:59.000Z

324

Effect of HVDC line faults on transient torsional torques of turbine-generator shafts  

SciTech Connect

This paper investigates the effects of HVdc line faults, line de-energization, and line re-energization on the transient torsional stresses of steam turbine-generator (T-G) units. The studies are conducted on a bipole HVdc system which connects a T-G set to a large ac system. The shaft transient stresses of the T-G set as a result of HVac line fault, fault clearing, and automatic reclosure are also determined when the HVdc transmission system is replaced by an equivalent double-line HVac system. The EMTDC program is used for the simulation studies. The studies conclude that transient shaft stresses as a result of HVdc line fault and its subsequent switching events are (1) significantly less severe than those of HVac faults and subsequent switchings, and (2) not sensitive to the fault location and disturbance duration.

Shi, W. (Xi'an Jiaotong Univ. (China). Dept. of Electrical Engineering); Iravani, M.R. (Univ. of Toronto, Ontario (Canada). Dept. of Electrical Engineering)

1994-08-01T23:59:59.000Z

325

Reducing Fuel Consumption through Semi-Automated Platooning with Class 8 Tractor Trailer Combinations (Poster)  

SciTech Connect

This poster describes the National Renewable Energy Laboratory's evaluation of the fuel savings potential of semi-automated truck platooning. Platooning involves reducing aerodynamic drag by grouping vehicles together and decreasing the distance between them through the use of electronic coupling, which allows multiple vehicles to accelerate or brake simultaneously. The NREL study addressed the need for data on American style line-haul sleeper cabs with modern aerodynamics and over a range of trucking speeds common in the United States.

Lammert, M.; Gonder, J.

2014-07-01T23:59:59.000Z

326

Float level switch for a nuclear power plant containment vessel  

DOE Patents (OSTI)

This invention is a float level switch used to sense rise or drop in water level in a containment vessel of a nuclear power plant during a loss of coolant accident. The essential components of the device are a guide tube, a reed switch inside the guide tube, a float containing a magnetic portion that activates a reed switch, and metal-sheathed, ceramic-insulated conductors connecting the reed switch to a monitoring system outside the containment vessel. Special materials and special sealing techniques prevent failure of components and allow the float level switch to be connected to a monitoring system outside the containment vessel.

Powell, James G. (Clifton Park, NY)

1993-01-01T23:59:59.000Z

327

Float level switch for a nuclear power plant containment vessel  

DOE Patents (OSTI)

This invention is a float level switch used to sense rise or drop in water level in a containment vessel of a nuclear power plant during a loss of coolant accident. The essential components of the device are a guide tube, a reed switch inside the guide tube, a float containing a magnetic portion that activates a reed switch, and metal-sheathed, ceramic-insulated conductors connecting the reed switch to a monitoring system outside the containment vessel. Special materials and special sealing techniques prevent failure of components and allow the float level switch to be connected to a monitoring system outside the containment vessel. 1 figures.

Powell, J.G.

1993-11-16T23:59:59.000Z

328

IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS, VOL. 5, NO. 2, MARCH/APRIL 1999 261 The AMOEBA Switch: An Optoelectronic Switch  

E-Print Network (OSTI)

The AMOEBA Switch: An Optoelectronic Switch for Multiprocessor Networking Using Dense-WDM Ashok V- cessor optoelectronic bit-sliced arrayed (AMOEBA) crossbar switch. The AMOEBA switch addresses directly onto silicon VLSI circuits. Optoelectronic-VLSI technology is used to integrate the switch fabric

Ford, Joseph E.

329

AUTOMATED, HIGHLY ACCURATE VERIFICATION OF RELAP5-3D  

SciTech Connect

Computer programs that analyze light water reactor safety solve complex systems of governing, closure and special process equations to model the underlying physics. In addition, these programs incorporate many other features and are quite large. RELAP5-3D[1] has over 300,000 lines of coding for physics, input, output, data management, user-interaction, and post-processing. For software quality assurance, the code must be verified and validated before being released to users. Verification ensures that a program is built right by checking that it meets its design specifications. Recently, there has been an increased importance on the development of automated verification processes that compare coding against its documented algorithms and equations and compares its calculations against analytical solutions and the method of manufactured solutions[2]. For the first time, the ability exists to ensure that the data transfer operations associated with timestep advancement/repeating and writing/reading a solution to a file have no unintended consequences. To ensure that the code performs as intended over its extensive list of applications, an automated and highly accurate verification method has been modified and applied to RELAP5-3D. Furthermore, mathematical analysis of the adequacy of the checks used in the comparisons is provided.

George L Mesina; David Aumiller; Francis Buschman

2014-07-01T23:59:59.000Z

330

Analysis of Open Automated Demand Response Deployments in California and Guidelines to Transition to Industry Standards  

E-Print Network (OSTI)

to Automated Demand Response and the OpenADR Automated Demand Response Program. https://Data for Automated Demand Response in Commercial

Ghatikar, Girish

2014-01-01T23:59:59.000Z

331

Open Automated Demand Response Technologies for Dynamic Pricing and Smart Grid  

E-Print Network (OSTI)

for Automated Demand Response in Commercial Buildings. In2010. Open Automated Demand Response Dynamic Pricing2009. Open Automated Demand Response Communications

Ghatikar, Girish

2010-01-01T23:59:59.000Z

332

Explorations of Space-Charge Limits in Parallel-Plate Diodes and Associated Techniques for Automation  

E-Print Network (OSTI)

and Associated Techniques for Automation by Benjamin Ragan-and Associated Techniques for Automation Copyright 2013 byand Associated Techniques for Automation by Benjamin Ragan-

Ragan-Kelley, Benjamin

2013-01-01T23:59:59.000Z

333

Demonstration of Datacenter Automation Software and Hardware (DASH) at the California Franchise Tax Board  

E-Print Network (OSTI)

of Datacenter Automation Software and Hardware (DASH) at theof Datacenter Automation Software and Hardware (DASH) at theprotocol for building automation and control networks. It is

Bell, Geoffrey C.

2010-01-01T23:59:59.000Z

334

Automated Demand Response Technologies and Demonstration in New York City using OpenADR  

E-Print Network (OSTI)

EMCS Vendor and Product Automated Logic Control RemoteBuildings Integrator, Automated Logic Corporations WebCTRLIntegrator (EBI), Automated Logic Corporations WebCTRL ,

Kim, Joyce Jihyun

2014-01-01T23:59:59.000Z

335

High-speed, sub-pull-in voltage MEMS switching.  

SciTech Connect

We have proposed and demonstrated MEMS switching devices that take advantage of the dynamic behavior of the MEMS devices to provide lower voltage actuation and higher switching speeds. We have explored the theory behind these switching techniques and have demonstrated these techniques in a range of devices including MEMS micromirror devices and in-plane parallel plate MEMS switches. In both devices we have demonstrated switching speeds under one microsecond which has essentially been a firm limit in MEMS switching. We also developed low-loss silicon waveguide technology and the ability to incorporate high-permittivity dielectric materials with MEMS. The successful development of these technologies have generated a number of new projects and have increased both the MEMS switching and optics capabilities of Sandia National Laboratories.

Spahn, Olga Blum; Brewer, Steven; Olsson, Roy H.; Bogart, Gregory R.; Luck, David L.; Watts, Michael R.; Shaw, Michael J.; Nielson, Gregory N.; Resnick, Paul James; Tigges, Christopher P.; Grossetete, Grant David

2008-01-01T23:59:59.000Z

336

Parallel Lines II: Construction of Parallel Lines  

Science Journals Connector (OSTI)

Situations are frequently encountered in which two lines, determined by linear regression, are theoretically...m 1 and m 2.

Ronald J. Tallarida Ph. D.; Rodney B. Murray Ph. D.

1987-01-01T23:59:59.000Z

337

Magnetic Switching under Pressure | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Revealing the Secrets of Chemical Bath Deposition Revealing the Secrets of Chemical Bath Deposition DNA Repair Protein Caught in the Act of Molecular Theft Velcro for Nanoparticles A Molecular Fossil Ultrafast Imaging of Electron Waves in Graphene Science Highlights Archives: 2013 | 2012 | 2011 | 2010 2009 | 2008 | 2007 | 2006 2005 | 2004 | 2003 | 2002 2001 | 2000 | 1998 | Subscribe to APS Science Highlights rss feed Magnetic Switching under Pressure DECEMBER 2, 2010 Bookmark and Share A schematic representation of the pressure-induced magnetic switching effect. The colored images highlight the direction of the magnetic orbital (grey plane) for the copper centers (green balls: copper, blue: nitrogen, red: oxygen/water, yellow: fluoride). A material's properties are a critical factor in the way that material

338

Multiple acousto-optic q-switch  

DOE Patents (OSTI)

An improved dynamic moire interferometer comprised of a lasing medium providing a plurality of beams of coherent light, a multiple q-switch producing multiple trains of 100,000 or more pulses per second, a combining means collimating multiple trains of pulses into substantially a single train and directing beams to specimen gratings affixed to a test material, and a controller, triggering and sequencing the emission of the pulses with the occurrence and recording of a dynamic loading event.

Deason, Vance A. (Idaho Falls, ID)

1993-01-01T23:59:59.000Z

339

Gas mixture for diffuse-discharge switch  

DOE Patents (OSTI)

Gaseous medium in a diffuse-discharge switch of a high-energy pulse generator is formed of argon combined with a compound selected from the group consisting of CF/sub 4/, C/sub 2/F/sub 6/, C/sub 3/F/sub 8/, n-C/sub 4/F/sub 10/, WF/sub 6/, (CF/sub 3/)/sub 2/S and (CF/sub 3/)/sub 2/O.

Christophorou, L.G.; Carter, J.G.; Hunter, S.R.

1982-08-31T23:59:59.000Z

340

Automated diagnostics scoping study. Final report  

SciTech Connect

The objective of the Automated Diagnostics Scoping Study was to investigate the needs for diagnostics in building operation and to examine some of the current technologies in automated diagnostics that can address these needs. The study was conducted in two parts. In the needs analysis, the authors interviewed facility managers and engineers at five building sites. In the technology survey, they collected published information on automated diagnostic technologies in commercial and military applications as well as on technologies currently under research. The following describe key areas that the authors identify for the research, development, and deployment of automated diagnostic technologies: tools and techniques to aid diagnosis during building commissioning, especially those that address issues arising from integrating building systems and diagnosing multiple simultaneous faults; technologies to aid diagnosis for systems and components that are unmonitored or unalarmed; automated capabilities to assist cause-and-effect exploration during diagnosis; inexpensive, reliable sensors, especially those that expand the current range of sensory input; technologies that aid predictive diagnosis through trend analysis; integration of simulation and optimization tools with building automation systems to optimize control strategies and energy performance; integration of diagnostic, control, and preventive maintenance technologies. By relating existing technologies to perceived and actual needs, the authors reached some conclusions about the opportunities for automated diagnostics in building operation. Some of a building operator`s needs can be satisfied by off-the-shelf hardware and software. Other needs are not so easily satisfied, suggesting directions for future research. Their conclusions and suggestions are offered in the final section of this study.

Quadrel, R.W.; Lash, T.A.

1994-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

ISA Approves Standard for Wireless Automation in Process Control  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ISA Approves Standard for Wireless Automation in Process Control ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications On September 9, the Standards and Practices Board of the International Society for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. ISA Approves Standard for Wireless Automation in Process Control Applications More Documents & Publications DOE/OE National SCADA Test Bed Fiscal Year 2009 Work Plan Wireless System Considerations When Implementing NERC Critical Infrastructure Protection Standards Control Systems Security Standards: Accomplishments And Impacts

342

An investigation of irregular switching in three phase adjustable speed motor drives without neutral connection  

E-Print Network (OSTI)

Phase Model 9 One Cycle of Reference Current 17 10 Effect of Magnitude of E on Current Slope 18 11 Effect of Back EMF on Switching with Zero Degree Phase difference with Reference Current . 19 12 Effect of Back EMF on Switching with Ninety Degree... Phase Switching with Unacceptable Phase Inductance 37 25 Three Phase Switching with unacceptable Back EMF 38 26 Circuit Configuration during iVull Switching States 41 27 Three Phase Switching without Null Switching State . 47 CHAPTER I INTRODUCTION...

Arefeen, Shamsal

2012-06-07T23:59:59.000Z

343

n-Tiered Test Automation Architecture for Agile Software Systems  

Science Journals Connector (OSTI)

Abstract This paper introduces a multi-tiered test automation architecture to optimize test automation in an Agile software development environment while increasing both the test coverage and depth of each tier. Test Automation is the act of converting manual test cases into automated scripts that can be executed autonomously. In general, testing accounts for roughly 60% of the overall development budget and approximately 50% of that is attributed to regression testing. In recent years software organizations have begun migrating to Agile software development practices and automated testing in hopes of reducing the cost, lengthy regression cycles, and time to market. Traditionally, test automation is conducted on stable, non-changing applications. In an Agile environment where the code constantly changes, automated test cases become obsolete and must constantly be refactored in order to provide meaningful feedback about the system's quality. In most instances the cost of maintenance of automated test code completely overshadows the entire automation effort and negates any possible Return on Investment (RoI). An n-Tiered Test Automation Architecture seeks to retain the RoI by abstracting the automation project into separate distinct tiers; Presentation, Business, Data, and Services. These abstractions allow automated testing to continue providing feedback despite the constant revision of the system. A case study was conducted using this method and the observations showed that the automation architecture was resilient to change while increasing the test coverage, the depth of testing, and the overall quality of the application under test.

Patrick Day

2014-01-01T23:59:59.000Z

344

Field Testing of Automated Demand Response for Integration of Renewable Resources in California's Ancillary Services Market for Regulation Products  

E-Print Network (OSTI)

Controls Larry Bacher, Automated Logic Corporation Louiscontrolled from a central Automated Logic Corporation energy

Kiliccote, Sila

2013-01-01T23:59:59.000Z

345

Switch Switch  

NLE Websites -- All DOE Office Websites (Extended Search)

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Wed Thu Fri Sat Sun Mon Tue Wed Thu Fri Sat Sun Mon Tue Wed Thu Fri Sat Sun Mon Tue Wed Thu Fri Sat Sun Mon...

346

Analysis of Open Automated Demand Response Deployments in California  

E-Print Network (OSTI)

LBNL-6560E Analysis of Open Automated Demand Response Deployments in California and Guidelines The work described in this report was coordinated by the Demand Response Research. #12; #12;Abstract This report reviews the Open Automated Demand Response

347

Automated Demand Response Strategies and Commissioning Commercial Building Controls  

E-Print Network (OSTI)

4 9 . Piette et at Automated Demand Response Strategies andDynamic Controls for Demand Response in New and ExistingFully Automated Demand Response Tests in Large Facilities"

Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila; Linkugel, Eric

2006-01-01T23:59:59.000Z

348

Petri Net Based Research of Home Automation Communication Protocol  

Science Journals Connector (OSTI)

The popularity of home automation has been increasing greatly in recent years. ... distributed, uncertain or randomized protocol model) of home automation, many questions concerned. For instance, is ... net to de...

Guangxuan Chen; Yanhui Du; Panke Qin; Jin Du

2013-01-01T23:59:59.000Z

349

A framework for interactive end-user web automation.  

E-Print Network (OSTI)

??This research investigates the feasibility and usefulness of a Web-based model for end-user Web automation. The aim is to empower end users to automate their (more)

Eliwa, Essam

2013-01-01T23:59:59.000Z

350

Department of Mechanical Engineering Spring 2011 Nanoparticle Reactor Automation  

E-Print Network (OSTI)

PENNSTATE Department of Mechanical Engineering Spring 2011 Nanoparticle Reactor Automation Overview would be fully automated and able to run overnight. The team was also asked to keep the solutions from

Demirel, Melik C.

351

Automating Logic Rectification by Approximate SPFDs Yu-Shen Yang  

E-Print Network (OSTI)

Automating Logic Rectification by Approximate SPFDs Yu-Shen Yang Dept. of ECE University of Toronto changes or implement incremental rewiring-based optimization operations. Most existing automated logic

Veneris, Andreas

352

Automated Store Management For Drum Storage Facility  

SciTech Connect

This paper describes advanced system technology developed for a new Drum Storage Facility to be operated by Taiwan Power Company (TPC). A logistics management concept is applied for the storage of solid rad-wastes in terms of automated handling, transportation and storing as well as in terms of data management. The individual equipments, such as automated Bridge Cranes, Automatic Guided Vehicles and auxiliary systems are introduced in this paper and the store management process is outlined. The authors report furthermore on challenges during the design and engineering phase and review the project implementation from the equipment supplier's end. (authors)

Koller, W.; Lang, R. [Siempelkamp Nukleartechnik GmbH, Krefeld (Germany)

2008-07-01T23:59:59.000Z

353

Beyond Commissioning: The Role of Automation  

SciTech Connect

This article takes a brief look at the benefits of commissioning and describes a vision of the future where most of the objectives of commissioning will be accomplished automatically by capabilities built into the building systems themselves. Commissioning will become an activity that's performed continuously rather than periodically, and only repairs requiring replacement or overhaul of equipment will require manual intervention. The article then identifies some of the technologies that will be needed to realize this vision and ends with a call for all involved in the enterprise of building commissioning and automation to embrace and dedicate themselves to a future of automated commissioning.

Brambley, Michael R.; Katipamula, Srinivas

2005-02-01T23:59:59.000Z

354

Automated generation of lattice QCD Feynman rules  

E-Print Network (OSTI)

The derivation of the Feynman rules for lattice perturbation theory from actions and operators is complicated, especially for highly improved actions such as HISQ. This task is, however, both important and particularly suitable for automation. We describe a suite of software to generate and evaluate Feynman rules for a wide range of lattice field theories with gluons and (relativistic and/or heavy) quarks. Our programs are capable of dealing with actions as complicated as (m)NRQCD and HISQ. Automated differentiation methods are used to calculate also the derivatives of Feynman diagrams.

A. Hart; G. M. von Hippel; R. R. Horgan; E. H. Mller

2009-04-02T23:59:59.000Z

355

Northwest Open Automated Demand Response Technology Demonstration Project  

E-Print Network (OSTI)

Report 2009. Open Automated Demand Response Communicationsand Techniques for Demand Response. California Energyand S. Kiliccote. Estimating Demand Response Load Impacts:

Kiliccote, Sila

2010-01-01T23:59:59.000Z

356

Design and Development of a Robot-Based Automation System for Cryogenic Crystal Sample Mounting at the Advanced Photon Source  

SciTech Connect

X-ray crystallography is the primary method to determine the 3D structures of complex macromolecules at high resolution. In the years to come, the Advanced Photon Source (APS) and similar 3rd-generation synchrotron sources elsewhere will become the most powerful tools for studying atomic structures of biological molecules. One of the major bottlenecks in the x-ray data collection process is the constant need to change and realign the crystal sample. This is a very time- and manpower-consuming task. An automated sample mounting system will help to solve this bottleneck problem. We have developed a novel robot-based automation system for cryogenic crystal sample mounting at the APS. Design of the robot-based automation system, as well as its on-line test results at the Argonne Structural Biology Center (SBC) 19-BM experimental station, are presented in this paper.

Shu, D.; Preissner, C.; Nocher, D.; Han, Y.; Barraza, J.; Lee, P.; Lee, W.-K.; Cai, Z.; Ginell, S.; Alkire, R.; Lazarski, K.; Schuessler, R.; Joachimiak, A. [Argonne National Laboratory, 9700 S. Cass Av., Argonne, Il 60439 (United States)

2004-05-12T23:59:59.000Z

357

Modeling Combustion Control for High Power Diesel Mode Switching  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Emissions Research Conference 2010 Modeling Combustion Control for High Power Diesel Mode Switching P-20 Motivation * High power LTC-diesel mode operation * Transient...

358

A New Class of Switched Reluctance Motors without Permanent Magnets...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

A New Class of Switched Reluctance Motors without Permanent Magnets A Segmented Drive Inverter Topology with a Small DC Bus Capacitor A Segmented Drive Inverter Topology with a...

359

Commute Mode Switching Impact Tool | Department of Energy  

Office of Environmental Management (EM)

Xcel worksheet describes the example data from the Commute Mode Switching Impact Tool. ghgcommutetool.xlsx More Documents & Publications Refrigerators and Refrigerator-Freezers...

360

Intelligent design of sensorless Switched reluctance motor drives; -.  

E-Print Network (OSTI)

??The Switched Reluctance Motor SRM drive technology has gone newlinethrough steady and significant development over the last two decades The newlinesimplicity in both motor construction (more)

Marsaline Beno, M

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Get Current: Switch on Clean Energy Coloring Book | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Coloring book of energy efficiency and renewable energy technologies for kids. coloringbook2010.pdf More Documents & Publications Get Current: Switch on Clean Energy Coloring Book...

362

Q switching by self-focusing  

SciTech Connect

A novel passive technique for obtaining short-laser-pulse emission is presented. A cell with a high-second-order refractive-index liquid is included in an unstable laser cavity. The external self-focusing introduced by the cell at higher optical intensities reduces the diffraction losses, producing modulation of the gain and Q switching of the cavity. Compared with saturable absorbers, this method provides better mode quality, avoids filamentary emission, and is not restricted in wavelength. Experimental results are presented that are in good agreement with the numerical model developed.

Marconi, M.C.; Martinez, O.E.; Diodati, F.P.

1985-08-01T23:59:59.000Z

363

Switching surface chemistry with supramolecular machines.  

SciTech Connect

Tethered supramolecular machines represent a new class of active self-assembled monolayers in which molecular configurations can be reversibly programmed using electrochemical stimuli. We are using these machines to address the chemistry of substrate surfaces for integrated microfluidic systems. Interactions between the tethered tetracationic cyclophane host cyclobis(paraquat-p-phenylene) and dissolved {pi}-electron-rich guest molecules, such as tetrathiafulvalene, have been reversibly switched by oxidative electrochemistry. The results demonstrate that surface-bound supramolecular machines can be programmed to adsorb or release appropriately designed solution species for manipulating surface chemistry.

Dunbar, Timothy D.; Kelly, Michael James; Jeppesen, Jan O. (University of California, Los Angeles, CA); Bunker, Bruce Conrad; Matzke, Carolyn M.; Stoddart, J. Fraser; Huber, Dale L.; Kushmerick, James G.; Flood, Amar H. (University of California, Los Angeles, CA); Perkins, Julie (University of California, Los Angeles, CA); Cao, Jianguo (University of California, Los Angeles, CA)

2005-07-01T23:59:59.000Z

364

Fuel Switching Strategies for the 1990s  

E-Print Network (OSTI)

, petroleum coke, waste hydrocarbons (such as recovered from lubricants), biomass, and in the near future, methanol and other oxygenates or alcohols. Coal may also conceivably be a long-term sWitching candidate when utilized in a number of advanced open... under mos t conditions, in a manner that generates less NO x than heavier fuels such as coal, coke, and residual oil. Achieving NO x reductions with the latter is often a matter of capital investments and operating costs in either combustion...

Cascone, R.

365

How to Make Ad Hoc Proof Automation Less Ad Hoc  

E-Print Network (OSTI)

How to Make Ad Hoc Proof Automation Less Ad Hoc Georges Gonthier1 Beta Ziliani2 Aleks Nanevski3 Software Institute, Madrid ICFP 2011, Tokyo #12;Why proof automation at ICFP? Ad hoc polymorphism Overloading terms Ad hoc proof automation Overloading lemmas "How to make ad hoc polymorphism less ad hoc

Dreyer, Derek

366

Techniques for Securing Substation Automation Systems David Guidry1  

E-Print Network (OSTI)

Techniques for Securing Substation Automation Systems David Guidry1 , Mike Burmester1 , Xiuwen Liu1 propose techniques for resilient substation automation of power utility systems with security based-90-5 compliant substation automation systems that are resilient. We demonstrate the feasibility of our approach

Burmester, Mike

367

Automated FMEA based diagnostic symptom generation. Neal Snooke1,  

E-Print Network (OSTI)

Automated FMEA based diagnostic symptom generation. Neal Snooke1, , Chris Price Department the model based simulation used to produce an automated Failure Modes and Effect Analysis (FMEA to automate the production of a FMEA report, and the paper also considers the relationship between FMEA

Snooke, Neal

368

Home Automation in the Wild: Challenges and Opportunities  

E-Print Network (OSTI)

Home Automation in the Wild: Challenges and Opportunities A.J. Bernheim Brush, Bongshin Lee, Ratul enabling home automation. However, these technologies have not been widely adopted despite being available visits to 14 households with home automation. The long term experience, both positive and negative

Rajamani, Sriram K.

369

A Component Framework for Telecare and Home Automation  

E-Print Network (OSTI)

A Component Framework for Telecare and Home Automation Claire Maternaghan and Kenneth J. Turner-the-shelf and novel components. Keywords ­ Component Framework, Home Automation, Service-Oriented Architecture required. Home automation allows users to interact with their home as a whole, and to have flexible control

Hammerton, James

370

Improving Home Automation by Discovering Regularly Occurring Device Usage Patterns  

E-Print Network (OSTI)

Improving Home Automation by Discovering Regularly Occurring Device Usage Patterns Edwin O of two prediction algorithms, thus demonstrating multiple uses for a home automation system. Finally, we Several research efforts are focused on home automation. The Intelligent Room [2] uses an array of sensors

Cook, Diane J.

371

Remote-Controlled Home Automation Systems with Different Network Technologies  

E-Print Network (OSTI)

Remote-Controlled Home Automation Systems with Different Network Technologies Armando Roy Delgado into the potential for remote controlled operation of home automation systems. It considers problems, 2002) which certainly requires a careful study before developing any suitable Home Automation System

Grout, Vic

372

Automation strategies: existing theory or ad hoc decisions?  

Science Journals Connector (OSTI)

Automating manufacturing systems potentially improves competitiveness. Empirical studies show that the most successful result is achieved when decisions concerning automation are linked to the manufacturing strategies and competitive priorities of the company. It is suggested that automation is regarded as a separate decision group, within the manufacturing strategy content field.

Mats Winroth; Kristina Safsten; Johan Stahre

2007-01-01T23:59:59.000Z

373

Density Functional Theory-Based Database Development and CALPHAD Automation  

E-Print Network (OSTI)

Density Functional Theory-Based Database Development and CALPHAD Automation YI WANG,1,2 SHUNLI, the integration of first-principles calculations, CALPHAD modeling, and the automation of phase diagram, and the automated calculation of a phase diagram for the Al- Mg system. INTRODUCTION In thermodynamics, a phase

Chen, Long-Qing

374

Security Automation Developer Days March 22-25, 2011  

E-Print Network (OSTI)

Security Automation Developer Days March 22-25, 2011 Portrait Room The National Institute Reporting Format (ARF) efforts. 1:00 ­ 2:50 Adv. Tailoring and Automated Profile Selection Charles Schmidt tailoring procedures, and structures that could support automated selection of profiles. This discussion

Magee, Joseph W.

375

The Automation of Sound Reasoning and Successful Proof Finding  

E-Print Network (OSTI)

709 44 The Automation of Sound Reasoning and Successful Proof Finding LARRY WOS AND BRANDEN scientist naturally envisioned the automation of sound rea- soning ­ reasoning in which conclusions, and find proofs. But can such logical reasoning be fully automated? Can a single computer program

Fitelson, Branden

376

http://jla.sagepub.com/ Journal of Laboratory Automation  

E-Print Network (OSTI)

http://jla.sagepub.com/ Journal of Laboratory Automation http://jla.sagepub.com/content/early/2012 2012Journal of Laboratory Automation Timothy J. Bunning and Tony Jun Huang Yan Jun Liu, Mengqian Lu://www.sagepublications.com On behalf of: Society for Laboratory Automation and Screening can be found at:Journal of Laboratory

Demirel, Melik C.

377

IT/Automation Cost Reduction in Intel's Manufacturing Environment  

E-Print Network (OSTI)

IT/Automation Cost Reduction in Intel's Manufacturing Environment Brian Subirana subirana@mit.edu MIT Center for Coordination Science WP #222 July 2003 #12;IT/Automation Cost Reduction in Intel maintaining existing service levels. "We want you to reduce automation costs by 50% while maintaining equal

378

Control, automation and the hot rolling of steel  

Science Journals Connector (OSTI)

...Shercliff and M. J. Stowell Control, automation and the hot rolling of steel P.J...Rugby CV21 1BU, UK The current state of automation and control for hot rolling mills...mills|rolling mill models| Control, automation and the hot rolling of steel By P...

1999-01-01T23:59:59.000Z

379

AUTOMATED LOGIC SYNTHESIS OF RANDOM PATTERN TESTABLE CIRCUITS  

E-Print Network (OSTI)

AUTOMATED LOGIC SYNTHESIS OF RANDOM PATTERN TESTABLE CIRCUITS Nur A. Touba and Edward J. Mc during logic synthesis. An automated logic synthesis procedure is described which takes as an input a two. The approach taken in this paper is to consider random pattern testability during logic synthesis. An automated

Touba, Nur A.

380

E-beam high voltage switching power supply  

DOE Patents (OSTI)

A high power, solid state power supply is described for producing a controllable, constant high voltage output under varying and arcing loads suitable for powering an electron beam gun or other ion source. The present power supply is most useful for outputs in a range of about 100-400 kW or more. The power supply is comprised of a plurality of discrete switching type dc-dc converter modules, each comprising a voltage regulator, an inductor, an inverter for producing a high frequency square wave current of alternating polarity, an improved inverter voltage clamping circuit, a step up transformer, and an output rectifier for producing a dc voltage at the output of each module. The inputs to the converter modules are fed from a common dc rectifier/filter and are linked together in parallel through decoupling networks to suppress high frequency input interactions. The outputs of the converter modules are linked together in series and connected to the input of the transmission line to the load through a decoupling and line matching network. The dc-dc converter modules are phase activated such that for n modules, each module is activated equally 360{degree}/n out of phase with respect to a successive module. The phased activation of the converter modules, combined with the square current waveforms out of the step up transformers, allows the power supply to operate with greatly reduced output capacitance values which minimizes the stored energy available for discharge into an electron beam gun or the like during arcing. The present power supply also provides dynamic response to varying loads by controlling the voltage regulator duty cycle using simulated voltage feedback signals and voltage feedback loops. Circuitry is also provided for sensing incipient arc currents reflected at the output of the power supply and for simultaneously decoupling the power supply circuitry from the arcing load. 7 figs.

Shimer, D.W.; Lange, A.C.

1997-03-11T23:59:59.000Z

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

E-beam high voltage switching power supply  

DOE Patents (OSTI)

A high power, solid state power supply is described for producing a controllable, constant high voltage output under varying and arcing loads suitable for powering an electron beam gun or other ion source. The present power supply is most useful for outputs in a range of about 100-400 kW or more. The power supply is comprised of a plurality of discrete switching type dc-dc converter modules, each comprising a voltage regulator, an inductor, an inverter for producing a high frequency square wave current of alternating polarity, an improved inverter voltage clamping circuit, a step up transformer, and an output rectifier for producing a dc voltage at the output of each module. The inputs to the converter modules are fed from a common dc rectifier/filter and are linked together in parallel through decoupling networks to suppress high frequency input interactions. The outputs of the converter modules are linked together in series and connected to the input of the transmission line to the load through a decoupling and line matching network. The dc-dc converter modules are phase activated such that for n modules, each module is activated equally 360.degree./n out of phase with respect to a successive module. The phased activation of the converter modules, combined with the square current waveforms out of the step up transformers, allows the power supply to operate with greatly reduced output capacitance values which minimizes the stored energy available for discharge into an electron beam gun or the like during arcing. The present power supply also provides dynamic response to varying loads by controlling the voltage regulator duty cycle using simulated voltage feedback signals and voltage feedback loops. Circuitry is also provided for sensing incipient arc currents reflected at the output of the power supply and for simultaneously decoupling the power supply circuitry from the arcing load.

Shimer, Daniel W. (Danville, CA); Lange, Arnold C. (Livermore, CA)

1997-01-01T23:59:59.000Z

382

Salsbury and Diamond: Automated Testing of HVAC Systems for Commissioning -1 -Automated Testing of HVAC Systems for Commissioning  

E-Print Network (OSTI)

and Diamond: Automated Testing of HVAC Systems for Commissioning - 1 - Automated Testing of HVAC Systems This paper describes an approach to the automation of the commissioning of HVAC systems. The approach of many HVAC systems is limited more by poor installation, commissioning, and maintenance than by poor

383

Automated Architectural Exploration for Signal Processing Algorithms  

E-Print Network (OSTI)

Automated Architectural Exploration for Signal Processing Algorithms Ramsey Hourani, Ravi Jenkal, W processing algorithms. The goal of our framework is to improve hardware architectural exploration by guiding Property (IP) cores for system level signal processing algorithms. We present our view of a framework

Davis, Rhett

384

Automated Fuel Dispensing System Form Instructions  

E-Print Network (OSTI)

Automated Fuel Dispensing System Form Instructions If additional forms are necessary to provide(s) are hired and will be obtaining fuel, an Add Driver Form MUST be submitted for entry into the web database and/or diesel fuel to operate. Note: When a new vehicle, golf cart (gasoline), etc., is placed

Fernandez, Eduardo

385

Automated structure solution with the PHENIX suite  

SciTech Connect

Significant time and effort are often required to solve and complete a macromolecular crystal structure. The development of automated computational methods for the analysis, solution, and completion of crystallographic structures has the potential to produce minimally biased models in a short time without the need for manual intervention. The PHENIX software suite is a highly automated system for macromolecular structure determination that can rapidly arrive at an initial partial model of a structure without significant human intervention, given moderate resolution, and good quality data. This achievement has been made possible by the development of new algorithms for structure determination, maximum-likelihood molecular replacement (PHASER), heavy-atom search (HySS), template- and pattern-based automated model-building (RESOLVE, TEXTAL), automated macromolecular refinement (phenix. refine), and iterative model-building, density modification and refinement that can operate at moderate resolution (RESOLVE, AutoBuild). These algorithms are based on a highly integrated and comprehensive set of crystallographic libraries that have been built and made available to the community. The algorithms are tightly linked and made easily accessible to users through the PHENIX Wizards and the PHENIX GUI.

Terwilliger, Thomas C [Los Alamos National Laboratory; Zwart, Peter H [LBNL; Afonine, Pavel V [LBNL; Grosse - Kunstleve, Ralf W [LBNL

2008-01-01T23:59:59.000Z

386

Automated Structure Solution with the PHENIX Suite  

SciTech Connect

Significant time and effort are often required to solve and complete a macromolecular crystal structure. The development of automated computational methods for the analysis, solution and completion of crystallographic structures has the potential to produce minimally biased models in a short time without the need for manual intervention. The PHENIX software suite is a highly automated system for macromolecular structure determination that can rapidly arrive at an initial partial model of a structure without significant human intervention, given moderate resolution and good quality data. This achievement has been made possible by the development of new algorithms for structure determination, maximum-likelihood molecular replacement (PHASER), heavy-atom search (HySS), template and pattern-based automated model-building (RESOLVE, TEXTAL), automated macromolecular refinement (phenix.refine), and iterative model-building, density modification and refinement that can operate at moderate resolution (RESOLVE, AutoBuild). These algorithms are based on a highly integrated and comprehensive set of crystallographic libraries that have been built and made available to the community. The algorithms are tightly linked and made easily accessible to users through the PHENIX Wizards and the PHENIX GUI.

Zwart, Peter H.; Zwart, Peter H.; Afonine, Pavel; Grosse-Kunstleve, Ralf W.; Hung, Li-Wei; Ioerger, Tom R.; McCoy, A.J.; McKee, Eric; Moriarty, Nigel; Read, Randy J.; Sacchettini, James C.; Sauter, Nicholas K.; Storoni, L.C.; Terwilliger, Tomas C.; Adams, Paul D.

2008-06-09T23:59:59.000Z

387

Viability of Modern Automated Rapid Transit Applications  

E-Print Network (OSTI)

guideway: elevated, underground, at grade · Fully automated: electric-powered, electronic controls · Non · Headways/frequency: about 30 seconds/120 veh/hr · Small vehicles: 4-6 passengers, low weight · Eco: 4 km, 21 vehicles, two stations (parking and terminal) · Open to public service Spring 2011, 22

Minnesota, University of

388

Honeywell Modular Automation System Computer Software Documentation  

SciTech Connect

This document provides a Computer Software Documentation for a new Honeywell Modular Automation System (MAS) being installed in the Plutonium Finishing Plant (PFP). This system will be used to control new thermal stabilization furnaces in HA-211 and vertical denitration calciner in HC-230C-2.

CUNNINGHAM, L.T.

1999-09-27T23:59:59.000Z

389

AUTOMATED PLANNING FOR HYDROTHERMAL VENT PROSPECTING USING  

E-Print Network (OSTI)

AUTOMATED PLANNING FOR HYDROTHERMAL VENT PROSPECTING USING AUVS by ZEYN A SAIGOL A thesis submitted of searching the ocean floor for hydrothermal vents, using autonomous underwater vehicles (AUVs process (POMDP), but with a very large state space (of the order of 10123 states). This size of problem

Yao, Xin

390

PeopleSoft HR ECR Automation Process  

E-Print Network (OSTI)

PeopleSoft HR ECR Automation Process Inquiry Page March 2011 #12;ECR Transaction Inquiry To view a transaction that is in process or already completed, follow the menu navigation below: Home > Employee Change Home > Employee Change Request (ECR) > Inquire > ECR Inquire 5 #12;6 · The Originator is the only one

Huang, Jianyu

391

Review article Automated monitoring of greenhouse crops  

E-Print Network (OSTI)

of the greenhouse. Most of these sensors, such as thermistors and light meters, are reli- able, inexpensive, readilyReview article Automated monitoring of greenhouse crops David L. EHRETa*, Anthony LAUb, Shabtai and continuously detect crop stress, water use, growth and nutrition in greenhouse crops. Some of these techniques

Boyer, Edmond

392

Classified Automated Information System Security Program  

Directives, Delegations, and Requirements

To establish uniform requirements, policies, responsibilities, and procedures for the development and implementation of a Department of Energy (DOE) Classified Computer Security Program to ensure the security of classified information in automated data processing (ADP) systems. Cancels DOE O 5637.1. Canceled by DOE O 471.2.

1994-07-15T23:59:59.000Z

393

Safe controllers design for industrial automation systems  

Science Journals Connector (OSTI)

The design of safe industrial controllers is one of the most important domains related to Automation Systems research. To support it, synthesis and analysis techniques are available. Among the analysis techniques, two of the most important are Simulation ... Keywords: Formal verification, Industrial systems behaviour modelling, Real-time systems, Safe controllers, Simulation

Jos Machado; Eurico Seabra; Jos C. Campos; Filomena Soares; Celina P. Leo

2011-05-01T23:59:59.000Z

394

Sabbath Day Home Automation: "It's Like Mixing Technology and Religion"  

E-Print Network (OSTI)

We present a qualitative study of 20 American Orthodox Jewish families' use of home automation for religious purposes. These lead users offer insight into real-life, long-term experience with home automation technologies. We discuss how automation was seen by participants to contribute to spiritual experience and how participants oriented to the use of automation as a religious custom. We also discuss the relationship of home automation to family life. We draw design implications for the broader population, including surrender of control as a design resource, home technologies that support long-term goals and lifestyle choices, and respite from technology.

Woodruff, Allison; Foucault, Brooke

2007-01-01T23:59:59.000Z

395

A Mobile Automated Tomographic Gamma Scanning System - 13231  

SciTech Connect

Canberra Industries have recently designed and built a new automated Tomographic Gamma Scanning (TGS) system for mobile deployment. The TGS technique combines high-resolution gamma spectroscopy with low spatial resolution 3-dimensional image reconstruction to provide increased accuracy over traditional approaches for the assay of non-uniform source distributions in low-to medium-density, non-heterogeneous matrices. Originally pioneered by R. Estep at Los Alamos National Laboratory (LANL), the TGS method has been further developed and commercialized by Canberra Industries in recent years. The present system advances the state of the art on several fronts: it is designed to be housed in a standard cargo transport container for ease of transport, allowing waste characterization at multiple facilities under the purview of a single operator. Conveyor feed, drum rotator, and detector and collimator positioning mechanisms operated by programmable logic control (PLC) allow automated batch mode operation. The variable geometry settings can accommodate a wide range of waste packaging, including but not limited to standard 220 liter drums, 380 liter overpack drums, and smaller 20 liter cans. A 20 mCi Eu-152 transmission source provides attenuation corrections for drum matrices up to 1 g/cm{sup 3} in TGS mode; the system can be operated in Segmented Gamma Scanning (SGS) mode to measure higher density drums. To support TGS assays at higher densities, the source shield is sufficient to house an alternate Co-60 transmission source of higher activity, up to 250 mCi. An automated shutter and attenuator assembly is provided for operating the system with a dual intensity transmission source. The system's 1500 kg capacity rotator turntable can handle heavy containers such as concrete lined 380 liter overpack drums. Finally, data acquisition utilizes Canberra's Broad Energy Germanium (BEGE) detector and Lynx MCA, with 32 k channels, providing better than 0.1 keV/channel resolution to support both isotopic analysis with the MGA/MGAU software and a wide 3 MeV dynamic range. The calibration and verification of the system is discussed, and quantitative results are presented for a variety of drum types and matrices. (authors)

Kirkpatrick, J.M.; LeBlanc, P.J.; Nakazawa, D.; Petroka, D.L.; Kane Smith, S.; Venkataraman, R.; Villani, M. [Canberra Industries, Inc. 800 Research Parkway, Meriden CT 06450 (United States)] [Canberra Industries, Inc. 800 Research Parkway, Meriden CT 06450 (United States)

2013-07-01T23:59:59.000Z

396

Investigation of Flux Linkage Profile Measurement Methods for Switched Reluctance Motors and Permanent Magnet  

E-Print Network (OSTI)

- 1 - Investigation of Flux Linkage Profile Measurement Methods for Switched Reluctance Motors for switched reluctance motors (SRM's) and permanent magnet motors (PMM's). Various measurement methods have reluctance motors, permanent magnet motors. I. INTRODUCTION Switched Reluctance Motors (SRM's) have very

Lu, Kaiyuan

397

A comparator-based switched-capacitor pipelined analog-to-digital converter  

E-Print Network (OSTI)

A new comparator-based switched-capacitor(CBSC) technique is proposed that eliminates the need for high gain op-amps in switched-capacitor circuits. The CBSC technique replaces the op-amp in switched-capacitor circuits ...

Fiorenza, John Kenneth, 1977-

2007-01-01T23:59:59.000Z

398

Pulse and Hold Switching Current Readout of Superconducting Quantum Circuits  

E-Print Network (OSTI)

;#12;Abstract Josephson junction qubits are promising candidates for a scalable quantum processor. Such qubits on the switching of a Josephson junction from the zero voltage state to a finite voltage state. The Josephson a switching current detector by analyzing the phase space of a Josephson junction circuit with frequency

Haviland, David

399

Hybrid Dynamical Systems, or HDS: The Ultimate Switching Experience  

E-Print Network (OSTI)

Hybrid Dynamical Systems, or HDS: The Ultimate Switching Experience Michael S. Branicky Laboratory concentrated on formalizing the notion of a hybrid system as switching among an indexed collection of dynamical give a quick overview of the area of hybrid systems. I also briefly review the formal definition

Branicky, Michael S.

400

A Software Engineering Framework for Switched Fuzzy Systems  

E-Print Network (OSTI)

of switched fuzzy systems, in which the discrete characteristics of the mode-switching logic are implemented the intuitive nature of fuzzy logic. Our approach is backed by a Java package that provides an initial that this approach is useful as a tool for the natural development of control systems. Specifically, fuzzy set theory

Weiss, Gera

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Stator Vibration Analysis of Bearingless Switched Reluctance Motors  

Science Journals Connector (OSTI)

Radial magnetic force acts on the motor stator cause large vibration and acoustic noise, that have limit the application of switched reluctance motors (SRMs). They can be aggravated when there is unbalanced force due to rotor eccentricity. This paper ... Keywords: switched reluctance motors, bearingless technique, vibration, magnetic fore, mathematic model

Yang Yan; Deng Zhiquan; Zhang Qianying; Wang Xiaolin

2010-06-01T23:59:59.000Z

402

Electro-Tactile Display with Localized High-Speed Switching  

E-Print Network (OSTI)

-speed switching December 4-6, Tokyo, JAPAN ICAT 2002 #12;determined, and the type of stimulation, anodic stimulation or cathodic one, is selected. If the anodic stimulation is chosen, the upper switch which leads simultaneously uses only two electrodes: anode and cathode. These dipoles are scanned around the stimulation

Tachi, Susumu

403

Sensor Switch's Bright Manufacturing Future | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sensor Switch's Bright Manufacturing Future Sensor Switch's Bright Manufacturing Future Sensor Switch's Bright Manufacturing Future June 16, 2010 - 12:01pm Addthis Lindsay Gsell It's a simple concept that's saving thousands of dollars in utility bills each year: when a room is empty, turn off the lights. This is the basic concept behind Sensor Switch, a Connecticut-based manufacturer of lighting control products. Sensor Switch's occupancy sensor devices turn off lights when spaces are vacant. They also make devices that dim or turn off lights when sufficient daylight is present. Both types of products provide cost effective energy savings in indoor spaces like office buildings and warehouses. "There's an increasing public demand to save energy, which directly impacts the demand for our products," said Ben Hahn, vice president. "A key part of

404

North Australian Cloud Lines  

Science Journals Connector (OSTI)

A satellite classification and climatology of propagating mesoscale cloud fines in northern Australia is presented. These cloud fines range from long, narrow lines of shallow convection to extensive deep convective squall lines with mesoscale ...

W. Drosdowsky; G. J. Holland

1987-11-01T23:59:59.000Z

405

Development of an automated Red Light Violation Detection System (RLVDS) for Indian vehicles  

E-Print Network (OSTI)

Integrated Traffic Management Systems (ITMS) are now implemented in different cities in India to primarily address the concerns of road-safety and security. An automated Red Light Violation Detection System (RLVDS) is an integral part of the ITMS. In our present work we have designed and developed a complete system for generating the list of all stop-line violating vehicle images automatically from video snapshots of road-side surveillance cameras. The system first generates adaptive background images for each camera view, subtracts captured images from the corresponding background images and analyses potential occlusions over the stop-line in a traffic signal. Considering round-the-clock operations in a real-life test environment, the developed system could successfully track 92% images of vehicles with violations on the stop-line in a "Red" traffic signal.

Saha, Satadal; Nasipuri, Mita; Basu, Dipak Kumar

2010-01-01T23:59:59.000Z

406

Reversible Switching of an Optical Gate Using Phase-Change Material and Si Waveguide  

Science Journals Connector (OSTI)

Optical gate switch that uses Ge2Sb2Te5phase-change material was fabricated and the reversible switching has been...

Ikuma, Yuichiro; Shoji, Yuya; Kuwahara, Masashi; Wang, Xiaomin; Kintaka, Kenji; Kawashima, Hitoshi; Tanaka, Daiki; Tsuda, Hiroyuki

407

E-Print Network 3.0 - automotive switch-mode audio Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

advantages and problems when implementing direct energy conversion switching-mode audio power... on a direct-conversion switching-mode audio power ampli- ... Source: Ris National...

408

E-Print Network 3.0 - activation switch macs-index Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

Optical Summary: quadratically with switching node degree when active optoelectronic devices are used as switching elements 2... is presented. Because of the high cost of...

409

Ultrafast all?optical switching in a dual?core fiber nonlinear coupler  

Science Journals Connector (OSTI)

We report the first demonstration of a nonlinear coupler switch capable of substantially complete all?optical switching at subpicosecond rates with no light?induced thermal effects.

S. R. Friberg; Y. Silberberg; M. K. Oliver; M. J. Andrejco; M. A. Saifi; P. W. Smith

1987-01-01T23:59:59.000Z

410

E-Print Network 3.0 - assisted auxiliary switch Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

quasiresonant tank soft- switching inverter," in Proc. IEEE Ind... IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 19, NO. 2, MARCH 2004 363 A Passive Soft-Switching... for...

411

A phenomenological multi-axial constitutive law for switching in polycrystalline ferroelectric ceramics  

E-Print Network (OSTI)

A phenomenological multi-axial constitutive law for switching in polycrystalline ferroelectric; accepted 30 January 2002 Abstract A phenomenological constitutive law for ferroelectric switching due

412

Multi-Objective Optimal Placement of Automatic Line Switches in Power Distribution Networks  

Science Journals Connector (OSTI)

We select three objectives to be minimized simultaneously: System Average Interruption Frequency Index (SAIFI), System Average Interruption Duration Index (SAIDI...2009), defined as follows: ...

Diego Orlando Logrono; Wen-Fang Wu; Yi-An Lu

2013-01-01T23:59:59.000Z

413

RF transmission line and drill/pipe string switching technology for down-hole telemetry  

DOE Patents (OSTI)

A modulated reflectance well telemetry apparatus having an electrically conductive pipe extending from above a surface to a point below the surface inside a casing. An electrical conductor is located at a position a distance from the electrically conductive pipe and extending from above the surface to a point below the surface. Modulated reflectance apparatus is located below the surface for modulating well data into a RF carrier transmitted from the surface and reflecting the modulated carrier back to the surface. A RF transceiver is located at the surface and is connected between the electrically conductive pipe and the electrical conductor for transmitting a RF signal that is confined between the electrically conductive well pipe and the electrical conductor to the modulated reflectance apparatus, and for receiving reflected data on the well from the modulated reflectance apparatus.

Clark, David D. (Santa Fe, NM); Coates, Don M. (Santa Fe, NM)

2007-08-14T23:59:59.000Z

414

White Flame Energy switches to backhoes  

SciTech Connect

The mountaintop coal operator, White Flame Energy has switched to different truck-shovel arrangement. Along with many surface mining operations throughout central Appalachia, the company is using hoe-configured hydraulic excavators as opposed to the traditional front-shovel arrangements. Located in Varney, WV, White Flame Energy uses two Terex O & K mining shovels, an RH170 and an RH 200, which have the capacity to move 2 million cu yards per month from five seams, primarily the Coalburg, Stockton, and No 5 Block and associated rider seams. The article records conversations on the operations with Mike Vines, the general manager, and Don Nicewonder, the owner of White Flame Energy. 2 photos.

Fiscor, S.

2005-06-01T23:59:59.000Z

415

High voltage photo switch package module  

DOE Patents (OSTI)

A photo-conductive switch package module having a photo-conductive substrate or wafer with opposing electrode-interface surfaces, and at least one light-input surface. First metallic layers are formed on the electrode-interface surfaces, and one or more optical waveguides having input and output ends are bonded to the substrate so that the output end of each waveguide is bonded to a corresponding one of the light-input surfaces of the photo-conductive substrate. This forms a waveguide-substrate interface for coupling light into the photo-conductive wafer. A dielectric material such as epoxy is then used to encapsulate the photo-conductive substrate and optical waveguide so that only the metallic layers and the input end of the optical waveguide are exposed. Second metallic layers are then formed on the first metallic layers so that the waveguide-substrate interface is positioned under the second metallic layers.

Sullivan, James S; Sanders, David M; Hawkins, Steven A; Sampayan, Stephen E

2014-02-18T23:59:59.000Z

416

DAVIC - Distributed Energy Automation via Implicit Communication  

NLE Websites -- All DOE Office Websites (Extended Search)

DAVIC - Distributed Energy Automation via Implicit Communication DAVIC - Distributed Energy Automation via Implicit Communication Speaker(s): Peter Palensky Date: January 22, 2008 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Peng Xu The electricity grid is seen as a wide-area distributed process, determined by its sub-processes - in our case the loads and distributed generation. Network-based coordination needs to be done very carefully and properly timed to avoid instabilities. Luckily, every point of the grid has the same grid frequency and the same time. Integrating these two trivial things (implicit communication) into one consistent communication model might complement a low-quality (explicit) best-effort communication channel (e.g. Internet, GPRS) for real time applications. A simulation shall clarify how

417

home automation | OpenEI Community  

Open Energy Info (EERE)

91 91 Varnish cache server Home Groups Community Central Green Button Applications Developer Utility Rate FRED: FRee Energy Database More Public Groups Private Groups Features Groups Blog posts Content Stream Documents Discussions Polls Q & A Events Notices My stuff Energy blogs 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142285591 Varnish cache server home automation Home Graham7781's picture Submitted by Graham7781(2002) Super contributor 23 January, 2013 - 13:57 The Consumer Electronics Show round-up CES electronics home automation Las Vegas OpenEI Smart Grid Every January, Las Vegas hosts the Consumer Electronics Show. The CES is the world's largest technology-related trade show. The highlights of this year's show were OLED TVs, ultra-thin laptops,

418

Definition: Automated Voltage Regulators | Open Energy Information  

Open Energy Info (EERE)

Regulators Regulators Jump to: navigation, search Dictionary.png Automated Voltage Regulators Voltage regulators are transformers that can increase or decrease the voltage on a distribution circuit to help keep the voltage within a pre-determined band. Unlike capacitor banks, voltage regulators cannot adjust power factor. These devices typically monitor the voltage at the location where they are connected, and compare it to a programmed set point. If the voltage deviates too far from the set point, the voltage regulator can increase or decrease its output voltage by moving the tap on the secondary side up or down. An automated voltage regulator can operate with remote control signals, or in concert with other area voltage control devices, to help regulate distribution voltage in a coordinated fashion.

419

Automating the development of EBS messages  

SciTech Connect

The State of New Hampshire (NH) had consistently received ARCAs for EBS messages over the years. Unfortunately, NH received a deficiency for information content of an Emergency Broadcast System (EBS) message during the 1993 Vermont Yankee exercise. The easy answer was to conduct training and pass the remedial. However, that would not have solved the problem of too much information to tailor in too little time. NH isn`t the only one with this problem, as evidenced by the 34 deficiencies due to incomplete, inaccurate or late EBS messages from 1991-1993 (1994 data not available at the time this paper was written.) EBS messages account for 46% of all deficiencies according to FEMA. Automation was the real solution. This paper details the development of a computer model that automates the development of EBS messages.

O`Hare, M.J. [Earth Tech., Alexandria, VA (United States); DeLucca, D.

1995-12-31T23:59:59.000Z

420

Automated diagnostic kiosk for diagnosing diseases  

DOE Patents (OSTI)

An automated and autonomous diagnostic apparatus that is capable of dispensing collection vials and collections kits to users interesting in collecting a biological sample and submitting their collected sample contained within a collection vial into the apparatus for automated diagnostic services. The user communicates with the apparatus through a touch-screen monitor. A user is able to enter personnel information into the apparatus including medical history, insurance information, co-payment, and answer a series of questions regarding their illness, which is used to determine the assay most likely to yield a positive result. Remotely-located physicians can communicate with users of the apparatus using video tele-medicine and request specific assays to be performed. The apparatus archives submitted samples for additional testing. Users may receive their assay results electronically. Users may allow the uploading of their diagnoses into a central databank for disease surveillance purposes.

Regan, John Frederick; Birch, James Michael

2014-02-11T23:59:59.000Z

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Flow through electrode with automated calibration  

DOE Patents (OSTI)

The present invention is an improved automated flow through electrode liquid monitoring system. The automated system has a sample inlet to a sample pump, a sample outlet from the sample pump to at least one flow through electrode with a waste port. At least one computer controls the sample pump and records data from the at least one flow through electrode for a liquid sample. The improvement relies upon (a) at least one source of a calibration sample connected to (b) an injection valve connected to said sample outlet and connected to said source, said injection valve further connected to said at least one flow through electrode, wherein said injection valve is controlled by said computer to select between said liquid sample or said calibration sample. Advantages include improved accuracy because of more frequent calibrations, no additional labor for calibration, no need to remove the flow through electrode(s), and minimal interruption of sampling.

Szecsody, James E [Richland, WA; Williams, Mark D [Richland, WA; Vermeul, Vince R [Richland, WA

2002-08-20T23:59:59.000Z

422

Enhanced training effectiveness using automated student assessment.  

SciTech Connect

Training simulators have become increasingly popular tools for instructing humans on performance in complex environments. However, the question of how to provide individualized and scenario-specific assessment and feedback to students remains largely an open question. In this work, we follow-up on previous evaluations of the Automated Expert Modeling and Automated Student Evaluation (AEMASE) system, which automatically assesses student performance based on observed examples of good and bad performance in a given domain. The current study provides an empirical evaluation of the enhanced training effectiveness achievable with this technology. In particular, we found that students given feedback via the AEMASE-based debrief tool performed significantly better than students given only instructor feedback.

Forsythe, James Chris

2010-05-01T23:59:59.000Z

423

Automated generation of weld path trajectories.  

SciTech Connect

AUTOmated GENeration of Control Programs for Robotic Welding of Ship Structure (AUTOGEN) is software that automates the planning and compiling of control programs for robotic welding of ship structure. The software works by evaluating computer representations of the ship design and the manufacturing plan. Based on this evaluation, AUTOGEN internally identifies and appropriately characterizes each weld. Then it constructs the robot motions necessary to accomplish the welds and determines for each the correct assignment of process control values. AUTOGEN generates these robot control programs completely without manual intervention or edits except to correct wrong or missing input data. Most ship structure assemblies are unique or at best manufactured only a few times. Accordingly, the high cost inherent in all previous methods of preparing complex control programs has made robot welding of ship structures economically unattractive to the U.S. shipbuilding industry. AUTOGEN eliminates the cost of creating robot control programs. With programming costs eliminated, capitalization of robots to weld ship structures becomes economically viable. Robot welding of ship structures will result in reduced ship costs, uniform product quality, and enhanced worker safety. Sandia National Laboratories and Northrop Grumman Ship Systems worked with the National Shipbuilding Research Program to develop a means of automated path and process generation for robotic welding. This effort resulted in the AUTOGEN program, which has successfully demonstrated automated path generation and robot control. Although the current implementation of AUTOGEN is optimized for welding applications, the path and process planning capability has applicability to a number of industrial applications, including painting, riveting, and adhesive delivery.

Sizemore, John M. (Northrop Grumman Ship Systems); Hinman-Sweeney, Elaine Marie; Ames, Arlo Leroy

2003-06-01T23:59:59.000Z

424

Automated genotyping of dinucleotide repeat markers  

SciTech Connect

The dinucleotide repeats (i.e., microsatellites) such as CA-repeats are a highly polymorphic, highly abundant class of PCR-amplifiable markers that have greatly streamlined genetic mapping experimentation. It is expected that over 30,000 such markers (including tri- and tetranucleotide repeats) will be characterized for routine use in the next few years. Since only size determination, and not sequencing, is required to determine alleles, in principle, dinucleotide repeat genotyping is easily performed on electrophoretic gels, and can be automated using DNA sequencers. Unfortunately, PCR stuttering with these markers generates not one band for each allele, but a pattern of bands. Since closely spaced alleles must be disambiguated by human scoring, this poses a key obstacle to full automation. We have developed methods that overcome this obstacle. Our model is that the observed data is generated by arithmetic superposition (i.e., convolution) of multiple allele patterns. By quantitatively measuring the size of each component band, and exploiting the unique stutter pattern associated with each marker, closely spaced alleles can be deconvolved; this unambiguously reconstructs the {open_quotes}true{close_quotes} allele bands, with stutter artifact removed. We used this approach in a system for automated diagnosis of (X-linked) Duchenne muscular dystrophy; four multiplexed CA-repeats within the dystrophin gene were assayed on a DNA sequencer. Our method accurately detected small variations in gel migration that shifted the allele size estimate. In 167 nonmutated alleles, 89% (149/167) showed no size variation, 9% (15/167) showed 1 bp variation, and 2% (3/167) showed 2 bp variation. We are currently developing a library of dinucleotide repeat patterns; together with our deconvolution methods, this library will enable fully automated genotyping of dinucleotide repeats from sizing data.

Perlin, M.W.; Hoffman, E.P. [Carnegie Mellon Univ., Pittsburgh, PA (United States)]|[Univ. of Pittsburgh, PA (United States)

1994-09-01T23:59:59.000Z

425

Automated Microarray Image Analysis Toolbox for MATLAB  

SciTech Connect

The Automated Microarray Image Analysis (AMIA) Toolbox for MATLAB is a flexible, open-source microarray image analysis tool that allows the user to customize analysis of sets of microarray images. This tool provides several methods of identifying and quantify spot statistics, as well as extensive diagnostic statistics and images to identify poor data quality or processing. The open nature of this software allows researchers to understand the algorithms used to provide intensity estimates and to modify them easily if desired.

White, Amanda M.; Daly, Don S.; Willse, Alan R.; Protic, Miroslava; Chandler, Darrell P.

2005-09-01T23:59:59.000Z

426

Algorithms to Automate LCLS Undulator Tuning  

SciTech Connect

Automation of the LCLS undulator tuning offers many advantages to the project. Automation can make a substantial reduction in the amount of time the tuning takes. Undulator tuning is fairly complex and automation can make the final tuning less dependent on the skill of the operator. Also, algorithms are fixed and can be scrutinized and reviewed, as opposed to an individual doing the tuning by hand. This note presents algorithms implemented in a computer program written for LCLS undulator tuning. The LCLS undulators must meet the following specifications. The maximum trajectory walkoff must be less than 5 {micro}m over 10 m. The first field integral must be below 40 x 10{sup -6} Tm. The second field integral must be below 50 x 10{sup -6} Tm{sup 2}. The phase error between the electron motion and the radiation field must be less than 10 degrees in an undulator. The K parameter must have the value of 3.5000 {+-} 0.0005. The phase matching from the break regions into the undulator must be accurate to better than 10 degrees. A phase change of 113 x 2{pi} must take place over a distance of 3.656 m centered on the undulator. Achieving these requirements is the goal of the tuning process. Most of the tuning is done with Hall probe measurements. The field integrals are checked using long coil measurements. An analysis program written in Matlab takes the Hall probe measurements and computes the trajectories, phase errors, K value, etc. The analysis program and its calculation techniques were described in a previous note. In this note, a second Matlab program containing tuning algorithms is described. The algorithms to determine the required number and placement of the shims are discussed in detail. This note describes the operation of a computer program which was written to automate LCLS undulator tuning. The algorithms used to compute the shim sizes and locations are discussed.

Wolf, Zachary

2010-12-03T23:59:59.000Z

427

Automated Fault Location In Smart Distribution Systems  

E-Print Network (OSTI)

measured at the power substation during a single phase to ground fault clearance [17] .............................................. 111 Figure 26 Analyzed signal using wavelet transform from phase B current during a fault [17..., but are not limited to, substation and feeder relay, intelligent controllers for capacitor bank switches or reclosers, Automatic Meter Reading (AMR) systems installed at the customer sites, power quality meters installed at strategic locations in the system, low...

Lotfifard, Saeed

2012-10-19T23:59:59.000Z

428

Field Demonstration of Automated Demand Response for Both Winter and Summer Events in Large Buildings in the Pacific Northwest  

E-Print Network (OSTI)

of fully automated demand response in large facilities,2009). Open Automated Demand Response CommunicationsOpen Automated Demand Response Technology Demonstration

Piette, Mary Ann

2014-01-01T23:59:59.000Z

429

Automated 3D trabecular bone structure analysis of the proximal femurprediction of biomechanical strength by CT and DXA  

E-Print Network (OSTI)

z ORIGINAL ARTICLE Automated 3D trabecular bone structureIntroduction An automated 3D segmentation algorithm wasstudy was to use an automated 3D segmentation algorithm to

2010-01-01T23:59:59.000Z

430

Automated FMEA based diagnostic symptom generation  

Science Journals Connector (OSTI)

The comprehensive on-board diagnosis of faults in many aerospace and other engineered systems requires real time execution using limited computational resources, and must also provide verifiable behaviour. This paper shows how a diagnostic system satisfying these requirements can be automatically generated from the model based simulation used to produce an automated Failure Modes and Effect Analysis (FMEA). The resulting diagnostic system comprises a set of efficiently evaluated symptoms and their associated faults. The symptoms are complete in that they include all necessary observations required to determine applicable system operating states, unlike other work that finesses this problem by having models for each operating state and producing diagnostics for each operating state separately. The symptoms are also efficient because they abstract complex system behaviour based on observations available to the diagnostic system and only preserve sufficient symptom detail to isolate faults given these available observations. This work has been done in the context of diagnosing autonomous aircraft, and is illustrated with examples from that domain. The models used as a basis for automated generation of diagnostics were originally produced to automate the production of a FMEA report, and the paper also considers the relationship between FMEA and diagnostics that provides verification of the failure effects predicted by the simulation and hence validation of the generated symptoms.

Neal Snooke; Chris Price

2012-01-01T23:59:59.000Z

431

Towards Automated Invocation of Web APIs  

E-Print Network (OSTI)

Abstract. This paper, targeting the large variety of Web APIs, presents an approach towards automated invocation of Web APIs. This approach applies a data schema, to the SAWSDL lowering schema mapping, a grounding mechanism that connects the ontological representations of Web APIs with their execution messages. It is intuitive to existing standard efforts and effective in coping with the heterogeneities witnessed by a majority of Web APIs. 1. Invocation of Linked Web APIs In recent years, the world of service on the Web has witnessed an increasing dominance of Web APIs over classical Web services characterized by WSDL and SOAP [1]. The Semantic Web Service (SWS) community, aiming to increase the level of automation for tasks like discovery, composition and invocation through semantic descriptions, is challenged by the large variety of Web APIs, particularly when it comes to automated invocation. Not only are Web APIs heterogeneous in the forms of elements essential to their invocation, such as address URI, but they also lack machine processable descriptions to address this heterogeneity [1]. hRESTS, a

Ning Li; Carlos Pedrinaci; Jacek Kopecky; Maria Maleshkova; Dong Liu; John Domingue

2011-01-01T23:59:59.000Z

432

Argonne CNM Highlight: Reverse Chemical Switching of a Ferroelectric Film  

NLE Websites -- All DOE Office Websites (Extended Search)

Reverse Chemical Switching of a Ferroelectric Film Reverse Chemical Switching of a Ferroelectric Film Reverse Chemmical Switching of a Ferroelectric Film Ferroelectric materials display a spontaneous electric polarization below the Curie temperature that can be reoriented, typically by applying an electric field. In this study, researchers from Argonne, Northern Illinois University, and The University of Pennsylvania have demonstrated that the chemical environment can control the polarization orientation in an ultrathin ferroelectric film. This is complementary to recent predictions that polarization can affect surface chemistry and illuminates potential applications in sublithographic patterning and electrically tunable catalysts. In situ synchrotron X-ray scattering measurements showed that high or low

433

Photo-induced micro-mechanical optical switch  

DOE Patents (OSTI)

An optical switch is formed by introducing light lengthwise to a microcantilever waveguide directed toward a second waveguide. The microcantilever is caused to bend by light emitted from a laser diode orthogonal to the microcantilever and at an energy above the band gap, which induces stress as a result of the generation of free carriers. The bending of the waveguide directs the carrier frequency light to a second receptor waveguide or to a non-responsive surface. The switch may be combined in an array to perform multiple switching functions rapidly and at low energy losses.

Rajic, Slobodan (Knoxville, TN); Datskos, Panagiotis George (Knoxville, TN); Egert, Charles M. (late of Oak Ridge, TN)

2002-01-01T23:59:59.000Z

434

V-132: IBM Tivoli System Automation Application Manager Multiple  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2: IBM Tivoli System Automation Application Manager Multiple 2: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities V-132: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities April 12, 2013 - 6:00am Addthis PROBLEM: IBM has acknowledged multiple vulnerabilities in IBM Tivoli System Automation Application Manager PLATFORM: The vulnerabilities are reported in IBM Tivoli System Automation Application Manager versions 3.1, 3.2, 3.2.1, and 3.2.2 ABSTRACT: Multiple security vulnerabilities exist in the IBM Java Runtime Environment component of IBM Tivoli System Automation Application Manager which may affect the product REFERENCE LINKS: Secunia Advisory: SA53006 IBM Security Bulletin 21633991 IBM Security Bulletin 21633992 CVE-2011-3563 CVE-2012-0497 CVE-2012-0498 CVE-2012-0499 CVE-2012-0501

435

V-132: IBM Tivoli System Automation Application Manager Multiple  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2: IBM Tivoli System Automation Application Manager Multiple 2: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities V-132: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities April 12, 2013 - 6:00am Addthis PROBLEM: IBM has acknowledged multiple vulnerabilities in IBM Tivoli System Automation Application Manager PLATFORM: The vulnerabilities are reported in IBM Tivoli System Automation Application Manager versions 3.1, 3.2, 3.2.1, and 3.2.2 ABSTRACT: Multiple security vulnerabilities exist in the IBM Java Runtime Environment component of IBM Tivoli System Automation Application Manager which may affect the product REFERENCE LINKS: Secunia Advisory: SA53006 IBM Security Bulletin 21633991 IBM Security Bulletin 21633992 CVE-2011-3563 CVE-2012-0497 CVE-2012-0498 CVE-2012-0499 CVE-2012-0501

436

Home Network Technologies and Automating Demand Response  

SciTech Connect

Over the past several years, interest in large-scale control of peak energy demand and total consumption has increased. While motivated by a number of factors, this interest has primarily been spurred on the demand side by the increasing cost of energy and, on the supply side by the limited ability of utilities to build sufficient electricity generation capacity to meet unrestrained future demand. To address peak electricity use Demand Response (DR) systems are being proposed to motivate reductions in electricity use through the use of price incentives. DR systems are also be design to shift or curtail energy demand at critical times when the generation, transmission, and distribution systems (i.e. the 'grid') are threatened with instabilities. To be effectively deployed on a large-scale, these proposed DR systems need to be automated. Automation will require robust and efficient data communications infrastructures across geographically dispersed markets. The present availability of widespread Internet connectivity and inexpensive, reliable computing hardware combined with the growing confidence in the capabilities of distributed, application-level communications protocols suggests that now is the time for designing and deploying practical systems. Centralized computer systems that are capable of providing continuous signals to automate customers reduction of power demand, are known as Demand Response Automation Servers (DRAS). The deployment of prototype DRAS systems has already begun - with most initial deployments targeting large commercial and industrial (C & I) customers. An examination of the current overall energy consumption by economic sector shows that the C & I market is responsible for roughly half of all energy consumption in the US. On a per customer basis, large C & I customers clearly have the most to offer - and to gain - by participating in DR programs to reduce peak demand. And, by concentrating on a small number of relatively sophisticated energy consumers, it has been possible to improve the DR 'state of the art' with a manageable commitment of technical resources on both the utility and consumer side. Although numerous C & I DR applications of a DRAS infrastructure are still in either prototype or early production phases, these early attempts at automating DR have been notably successful for both utilities and C & I customers. Several factors have strongly contributed to this success and will be discussed below. These successes have motivated utilities and regulators to look closely at how DR programs can be expanded to encompass the remaining (roughly) half of the state's energy load - the light commercial and, in numerical terms, the more important residential customer market. This survey examines technical issues facing the implementation of automated DR in the residential environment. In particular, we will look at the potential role of home automation networks in implementing wide-scale DR systems that communicate directly to individual residences.

McParland, Charles

2009-12-01T23:59:59.000Z

437

Automated two column generator systems for medical radionuclides  

Science Journals Connector (OSTI)

This work describes automated chromatographic methods for the separation of medically useful radionuclides from source material containing their parent radionuclides. The separation techniques employ two chromatographic columns to ensure high chemical and radiochemical purity of the product radionuclide. The separations were performed using an automated system, the automated radionuclide separator (ARS2), consisting of syringe pumps and multiport valves controlled through a computer interface. Generator systems for 68Ga, 99mTc, 188Re and 213Bi will be described.

Daniel R. McAlister; E. Philip Horwitz

2009-01-01T23:59:59.000Z

438

Germ-line Allele  

NLE Websites -- All DOE Office Websites (Extended Search)

Germ-line Allele Germ-line Allele Name: Rachel Location: N/A Country: N/A Date: N/A Question: Can you please explain a "germ-line allele" to me! It is very important for a research paper I am writing about breast cancer. Replies: Mutations in genes are only able to be passed to the offspring if they are found in gametes (egg, sperm) mutations that occur in body cells other than gametes are usually not important because the cells can be replaced and they die eventually. The only way a characteristic can be passed to the offspring is through the eggs and sperm, so if there is a mutation in one these cells, the offspring can inherit the mutation. So a germ-line cell is a gamete. And a germ line allele is a version of the trait that is passed to the offspring through the germ line cell (or gamete).

439

Nematostatics of triple lines  

Science Journals Connector (OSTI)

The Landaude Gennes model for nematic liquid crystal bulk and interfaces has been extended to nematic triple lines involving the intersection of two isotropic fluids and one nematic liquid crystalline phase. A complete set of bulk, interface, and triple line force and torque balance equations has been formulated. The triple line force and torque balance equations have linear, interfacial, and bulk contributions. The bulk contributions appear as junction integrals, the surface contributions as junctions sums, and the line contributions as gradients of stresses. Reduction of dimensionality from three to one dimensional creates the following effects: (a) bulk terms enter interfacial balances as surface jumps and line balances as junction integrals, and (b) surface terms enter linear balances as junction sums. Line stress and torque equations are derived using classical liquid crystal models. The correspondence between line stress and line torque and their surface and bulk analogs is established. The triple line force and torque balance equations are use to analyze the contact angle in a nematic lens lying at the interface between two isotropic fluids, when the prefered surface orientation is tangential. The effect of anisotropy and long range elasticity on triple line phases is established. Under weak anchoring the contact angle is shown to be a function of the anchoring energy at the nematic-isotropic interface, while under strong anchoring conditions the contact angle is a function of the Peach-Koehler force that originates from bulk long range elasticity and acts on the triple line. The use of the complete set of balance equations removes the classical inconsistency in force balances at a contact line by properly taking into account long range (bulk gradient elasticity) and anisotropic (interfacial anchoring elasticity) effects.

Alejandro D. Rey

2003-01-30T23:59:59.000Z

440

Series Transmission Line Transformer  

DOE Patents (OSTI)

A series transmission line transformer is set forth which includes two or more of impedance matched sets of at least two transmissions lines such as shielded cables, connected in parallel at one end ans series at the other in a cascading fashion. The cables are wound about a magnetic core. The series transmission line transformer (STLT) which can provide for higher impedance ratios and bandwidths, which is scalable, and which is of simpler design and construction.

Buckles, Robert A. (Livermore, CA); Booth, Rex (Livermore, CA); Yen, Boris T. (El Cerrito, CA)

2004-06-29T23:59:59.000Z

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Definition: Automated Islanding And Reconnection | Open Energy Information  

Open Energy Info (EERE)

Islanding And Reconnection Islanding And Reconnection Jump to: navigation, search Dictionary.png Automated Islanding And Reconnection Automated Islanding and Reconnection Automated islanding and reconnection is achieved by automated separation and subsequent reconnection (autonomous synchronization) of an independently operated portion of the T&D system (i.e., microgrid) from the interconnected electric grid. A microgrid is an integrated energy system consisting of interconnected loads and distributed energy resources which, as an integrated system, can operate in parallel with the grid or as an island.[1] View on Wikipedia Wikipedia Definition Islanding refers to the condition in which a distributed (DG) generator continues to power a location even though electrical grid power

442

Xlink-Identifier: An Automated Data Analysis Platform for Confident...  

NLE Websites -- All DOE Office Websites (Extended Search)

of Chemically Cross-linked Peptides using Xlink-Identifier: An Automated Data Analysis Platform for Confident Identifications of Chemically Cross-linked Peptides using Abstract:...

443

Fueling Robot Automates Hydrogen Hose Reliability Testing (Fact...  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated robot mimics fueling action to test hydrogen hoses for durability in real-world conditions. With at least three major auto manufacturers expected to release fuel cell...

444

Automated data extraction from in situ protein stable isotope...  

NLE Websites -- All DOE Office Websites (Extended Search)

data extraction from in situ protein stable isotope probing studies. Automated data extraction from in situ protein stable isotope probing studies. Abstract: Protein stable isotope...

445

Automated Office Systems Support (AOSS) Quality Assurance Model...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

assurance model, including checklists, for activity relative to network and desktop computer support. Automated Office Systems Support (AOSS) Quality Assurance Model More...

446

Automation of Treebank Annotation Thorsten Brants and Wojciech Skut  

E-Print Network (OSTI)

Thorsten Brants and Wojciech Skut (1998) Automation of Treebank Annotation. In D.M.W. Powers (ed.) NeMLaP3

447

Automated Demand Response Benefits California Utilities and Commercial...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

. U.S. Department of Energy |September 2014 Automated Demand Response Benefits California Utilities and Commercial & Industrial Customers Page 1 Under the American Recovery and...

448

Linking Continuous Energy Management and Open Automated Demand Response  

E-Print Network (OSTI)

A. Barat, D. Watson. Demand Response Spinning ReserveOpen Automated Demand Response Communication Standards:Dynamic Controls for Demand Response in a New Commercial

Piette, Mary Ann

2009-01-01T23:59:59.000Z

449

Northwest Open Automated Demand Response Technology Demonstration Project  

E-Print Network (OSTI)

reliability signals for demand response GTA HTTPS HVAC IT kWand Commissioning Automated Demand Response Systems. and Techniques for Demand Response. California Energy

Kiliccote, Sila

2010-01-01T23:59:59.000Z

450

Direct versus Facility Centric Load Control for Automated Demand Response  

E-Print Network (OSTI)

Interoperable Automated Demand Response Infrastructure.and Techniques for Demand Response. LBNL Report 59975. Mayand Communications for Demand Response and Energy Efficiency

Piette, Mary Ann

2010-01-01T23:59:59.000Z

451

UNIVERSITY OF CALIFORNIA, SAN DIEGO Automated Feature Design...  

NLE Websites -- All DOE Office Websites (Extended Search)

Proc. Proceedings of International Workshop on Structural Health Monitoring, Palo Alto, California. 2013. D.Y. Harvey, M.D. Todd, Automated extraction of damage features...

452

Substation automation systems and IEC 61850: interoperability testing.  

E-Print Network (OSTI)

??Dissertao de mest., Engenharia Electrnica e Telecomunicaes, Faculdade de Cincias e Tecnologia, Univ. do Algarve, 2011 The Substation Automation System (SAS) is the backbone of (more)

Evaristo, Henrique A. Guerreiro Dias

2011-01-01T23:59:59.000Z

453

automated segmentation algorithm: Topics by E-print Network  

NLE Websites -- All DOE Office Websites (Extended Search)

Tumor Segmentation using two MRI Modalities Mohamed Ben Salah1 , Idanis Diaz1 automated brain tumor segmentation from only two magnetic resonance image modalities. The technique...

454

Towards Automated Story Analysis Using Participatory Harry Halpin  

E-Print Network (OSTI)

Towards Automated Story Analysis Using Participatory Design Harry Halpin Institute University of Edinburgh 2 Buccleuch Place Edinburgh, UK J.Moore@ed.ac.uk Judy Robertson Human Communications

Moore, Johanna D.

455

An automated testing system for telephony software - A case study.  

E-Print Network (OSTI)

??As the complexity of software system increases, delivering quality software successfully becomes an ever more challenging task. Applying automated testing techniques effectively to the software (more)

Zhou, Yingxiang Ingrid

2009-01-01T23:59:59.000Z

456

Global health response more accurate with automated influenza...  

NLE Websites -- All DOE Office Websites (Extended Search)

Global health response more accurate with automated influenza surveillance Public health officials will be able to determine whether an outbreak of an infectious disease comes from...

457

ITU G.hn Concept and Home Automation  

Science Journals Connector (OSTI)

For long time, many in the buildings industry have been looking for a day when home automation systems would become fully integrated with communication...

Manfred Schneps-Schneppe

2009-01-01T23:59:59.000Z

458

PaR-PaR Laboratory Automation Platform  

Science Journals Connector (OSTI)

Since more time and effort is often required to instruct a robot to perform a new task than the robot saves a researcher by performing the task, researchers can only effectively automate a small fraction of their workflows. ... As the biological design/implementation process becomes increasingly software-automated,(10-26) achieving this ideal will become increasingly important so that researchers across laboratories with different robotics platforms can all benefit from design automation software innovations. ... By automating the design of DNA fabrication schemes using computational algorithms, we can eliminate human error while reducing redundant operations, thus minimizing the time and cost required for conducting biol. ...

Gregory Linshiz; Nina Stawski; Sean Poust; Changhao Bi; Jay D. Keasling; Nathan J. Hillson

2012-10-04T23:59:59.000Z

459

Assessment of the Current Level of Automation in the Manufacture...  

NLE Websites -- All DOE Office Websites (Extended Search)

Assessment of the Current Level of Automation in the Manufacture of Fuel Cell Systems for Combined Heat and Power Applications Michael Ulsh National Renewable Energy Laboratory...

460

Individual differences in the calibration of trust in automation.  

E-Print Network (OSTI)

??A large body of research has identified that one of the major factors influencing decisions about automation use is operator's trust. Studies have shown that (more)

Pop, Vlad Liviu

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Electrically calibrated absolute radiometer suitable for measurement automation  

Science Journals Connector (OSTI)

New electrically calibrated absolute radiometers (ESRs) were developed having fast response and high responsivity; these ESRs are specially useful for measurement automation. They are...

Boivin, Louis-Philippe; McNeely, Francis T

1986-01-01T23:59:59.000Z

462

Lean Automation: Combining Lean with Industrial Robotics in Real Examples.  

E-Print Network (OSTI)

?? The purpose of this report is to analyze whether we can have a better automation manufacturing using lean solutions. First, this report is started (more)

Delkhosh, Ali

2012-01-01T23:59:59.000Z

463

AUTOMATION IN THE MEAT INDUSTRY | Cutting and Boning  

Science Journals Connector (OSTI)

Abstract The strongest incentives for the industry to adopt automation technology for cutting and boning relate to the drive for improved productivity through reduced labor. Also work environment, increased yield and adaptability to a wide range of customer specifications are important drivers. Automation in the pig meat industry has mainly been adopted in regions with high labor costs such as Northern Europe. In New Zealand the ovine meat industry has been progressive in developing and using automation technology. Automation in the beef industry is limited because of the complexity associated with handling of the size and biological variation of the material.

R. Clarke; J.U. Nielsen; N.T. Madsen

2014-01-01T23:59:59.000Z

464

Automation to Support Risk Assessment and Management at DHS  

Science Journals Connector (OSTI)

DHS is pursuing a portfolio of research and development projects known as the Threat Assessment Portfolio, conducting a range of cross-cutting analytic automation research to address...

Dennis, Stephen

465

Examining the Process of Automation Development and Deployment.  

E-Print Network (OSTI)

??In order to develop a better understanding of the process of development and deployment of automated systems, this thesis examines aspects of project execution and (more)

Barsalou, Edward

2006-01-01T23:59:59.000Z

466

Fully Automated Radiation Hardened by Design Circuit Construction.  

E-Print Network (OSTI)

??A fully automated logic design methodology for radiation hardened by design (RHBD) high speed logic using fine grained triple modular redundancy (TMR) is presented. The (more)

Hindman, Nathan David

2012-01-01T23:59:59.000Z

467

Automation of Nested Matrix and Derivative Operations Robert Kalaba  

E-Print Network (OSTI)

Automation of Nested Matrix and Derivative Operations Robert Kalaba Departments of Electrical of expressions involving nested matrix and derivative operations. The need to differentiate such expressions

Tesfatsion, Leigh

468

A novel rotor position estimation approach for an 8/6 solid rotor switched reluctance motor  

Science Journals Connector (OSTI)

Switched reluctance motor (SRM) is becoming popular due to its simple construction, low manufacturing cost, ruggedness and fault-tolerant capability. In conventional switched reluctance motor (SRM), rotor is laminated. But in solid rotor switched reluctance ... Keywords: Artificial neural network, Rotor position estimation, Solid rotor switched reluctance motor, Two-phase excitation

L. Jessi Sahaya Shanthi; R. Arumugam; Y. K. Taly

2012-04-01T23:59:59.000Z

469

Control of a Linear Switched Reluctance Motor as a Propulsion System for Autonomous Railway Vehicles  

E-Print Network (OSTI)

Control of a Linear Switched Reluctance Motor as a Propulsion System for Autonomous Railway) and the linear switched reluctance motor (LSRM). Switched reluctance motors generally offer a very simple issue with the switched reluctance motors is the highly nonlinear magnetisation characteristic

Paderborn, Universität

470

Semi-automated Extraction of Digital Objective Prism Spectra  

E-Print Network (OSTI)

We describe a method for the extraction of spectra from high dispersion objective prism plates. Our method is a catalogue driven plate solution approach, making use of the Right Ascension and Declination coordinates for the target objects. In contrast to existing methods of photographic plate reduction, we digitize the entire plate and extract spectra off-line. This approach has the advantages that it can be applied to CCD objective prism images, and spectra can be re-extracted (or additional spectra extracted) without having to re-scan the plate. After a brief initial interactive period, the subsequent reduction procedure is completely automatic, resulting in fully-reduced, wavelength justified spectra. We also discuss a method of removing stellar continua using a combination of non-linear filtering algorithms. The method described is used to extract over 12,000 spectra from a set of 92 objective prism plates. These spectra are used in an associated project to develop automated spectral classifiers based on neural networks.

Coryn A. L. Bailer-Jones; Mike Irwin; Ted von Hippel

1998-04-23T23:59:59.000Z

471

Application experience with the diaglog automated diagnostic system  

SciTech Connect

Operating experience over the last year with the DIAGLOG automated diagnostic system has shown that operating events at a 230 KV substation for selected line terminals can be monitored and diagnosed. DIAGLOG is a Diagnostic Logic System which has been applied to substation diagnostics under EPRI Project RP1359-20. Reporting data from an instrumented substation has been used to operate the diagnostic system when a significant event is reported. Lessons learned and the significance of monitor point selection are discussed. The use of maintenance alerts f or indicating when equipment is starting to operate out of specification as well as failure reports to tell when a misoperation has occurred are discussed. when a misoperation is detected, then the diagnostics can be asked to perform a troubleshooting procedure to identify what item has failed to operate correctly. Both primary and secondary relay operations are combined in the model logic, and near and remote events are recognized through monitoring of the carrier set activity.

Andre, B. [ANDTEK Inc. Huntsville, AL (United States); Smith, L. [Alabama Power, Birmingham, AL (United States)

1996-03-01T23:59:59.000Z

472

Electro-mechanical heat switch for cryogenic applications  

DOE Patents (OSTI)

A heat switch includes two symmetric jaws. Each jaw is comprised of a link connected at a translatable joint to a flexible arm. Each arm rotates about a fixed pivot, and has an articulated end including a thermal contact pad connected to a heat sink. The links are joined together at a translatable main joint. To close the heat switch, a closing solenoid is actuated and forces the main joint to an over-center position. This movement rotates the arms about their pivots, respectively, forces each of them into a stressed configuration, and forces the thermal contact pads towards each other and into compressive contact with a cold finger. The closing solenoid is then deactivated. The heat switch remains closed due to a restoring force generated by the stressed configuration of each arm, until actuation of an opening solenoid returns the main joint to its starting open-switch position.

van den Berg, Marcel L. (Oakland, CA); Batteux, Jan D. (Hayward, CA); Labov, Simon E. (Berkeley, CA)

2003-01-01T23:59:59.000Z

473

Throughput-cost analysis of optical flow switching  

E-Print Network (OSTI)

In this paper, we employ a cost model embodying major sources of capital expenditure (CapEx) to compare the throughput-cost tradeoff offered by optical flow switching to that of more traditional optical network architectures.

Chan, Vincent W. S.

474

A Novel Fuzzy Controller for Switched Reluctance Motor Drive  

Science Journals Connector (OSTI)

There are serious nonlinear, variable strongly coupling characteristic in switched reluctance motor (SRM),and its electromagnetic relationship is hard to analyze. According to the nonlinear inductance model of SRM,a control system for SRM is carried ...

Yiwang Wang

2009-05-01T23:59:59.000Z

475

Model predictive torque control of a Switched Reluctance Motor  

Science Journals Connector (OSTI)

The strongly nonlinear magnetic characteristic of Switched Reluctance Motors (SRMs) makes their torque control a challenging task. In contrast to standard current-based control schemes, we use Model Predictive Control (MPC) and directly manipulate the ...

Helfried Peyrl; Georgios Papafotiou; Manfred Morari

2009-02-01T23:59:59.000Z

476

Fault current limiter based on triggered vacuum switch  

Science Journals Connector (OSTI)

A new type of fault current limiter (FCL) based on triggered vacuum switch ... is mainly composed of a capacitor, a current-limiting reactor connected with a capacitor in ... behaves as a conventional series comp...

Jing Shi; Ji-yan Zou; Jun-jia He

2000-12-01T23:59:59.000Z

477

Integrated optical switching using titanium nitride micro electromechanical systems  

E-Print Network (OSTI)

This thesis reports an integrated optical wavelength specific switching device for applications in optical integrated circuits (OICs) based on micro electromechanical systems (MEMS). The device consists of a ring resonator ...

Takahashi, Satoshi, Ph. D. Massachusetts Institute of Technology

2006-01-01T23:59:59.000Z

478

Throughput-Cost Analysis of Optical Flow Switching  

Science Journals Connector (OSTI)

In this paper, we employ a cost model embodying major sources of capital expenditure (CapEx) to compare the throughput-cost tradeoff offered by Optical Flow Switching to that of more...

Weichenberg, Guy; Chan, Vincent W; Swanson, Eric A; Mdard, Muriel

479

Graphene passively Q-switched two-micron fiber lasers  

Science Journals Connector (OSTI)

We demonstrate a passively Q-switched thulium fiber laser, using a graphene-based saturable absorber. The laser is based on an all-fiber ring cavity and produces ~2.3?s pulses at...

Wang, Fengqiu; Torrisi, Felice; Jiang, Zhe; Popa, Daniel; Hasan, Tawfique; Sun, Zhipei; Cho, Wonbae; Ferrari, Andrea C

480

Combining Genetic Oscillators and Switches using Evolutionary Algorithms  

E-Print Network (OSTI)

motifs, one toggle switch and one self- sustained oscillator using an evolutionary algorithm, which can]. Of particular interest in biology are those network motifs that produce self-sustained oscillations and bistable

Jin, Yaochu

Note: This page contains sample records for the topic "line switching automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

All graphene electromechanical switch fabricated by chemical vapor deposition  

E-Print Network (OSTI)

We demonstrate an electromechanical switch comprising two polycrystalline graphene films; each deposited using ambient pressure chemical vapor deposition. The top film is pulled into electrical contact with the bottom film ...

Milaninia, Kaveh M.

482

Get Current: Switch on Clean Energy Activity Book  

K-12 Energy Lesson Plans and Activities Web site (EERE)

Switching on clean energy technologies means strengthening the economy while protecting the environment. This activity book for all ages promotes energy awareness, with facts on different types of energy and a variety of puzzles in an energy theme.

483

Random switching exponential smoothing and inventory forecasting  

Science Journals Connector (OSTI)

Abstract Exponential smoothing models represent an important prediction tool both in business and in macroeconomics. This paper provides the analytical forecasting properties of the random coefficient exponential smoothing model in the multiple source of error framework. The random coefficient state-space representation allows for switching between simple exponential smoothing and local linear trend. Therefore it enables controlling, in a flexible manner, the random changing dynamic behavior of the time series. The paper establishes the algebraic mapping between the state-space parameters and the implied reduced form ARIMA parameters. In addition, it shows that the parametric mapping allows overcoming the difficulties that are likely to emerge in estimating directly the random coefficient state-space model. Finally, it presents an empirical application comparing the forecast accuracy of the suggested model vis--vis other benchmark models, both in the ARIMA and in the exponential smoothing class. Using time series relative to wholesalers inventories in the USA, the out-of-sample results show that the reduced form of the random coefficient exponential smoothing model tends to be superior to its competitors.

Giacomo Sbrana; Andrea Silvestrini

2014-01-01T23:59:59.000Z

484

Spark gap device for precise switching  

DOE Patents (OSTI)

A spark gap device for precise switching of an energy storage capacitor into an exploding bridge wire load is disclosed. Niobium electrodes having a melting point of 2,415 degrees centrigrade are spaced apart by an insulating cylinder to define a spark gap. The electrodes are supported by conductive end caps which, together with the insulating cylinder, form a hermetically sealed chamber filled with an inert, ionizable gas, such as pure xenon. A quantity of solid radioactive carbon-14 within the chamber adjacent the spark gap serves as a radiation stabilizer. The sides of the electrodes and the inner wall of the insulating cylinder are spaced apart a sufficient distance to prevent unwanted breakdown initiation. A conductive sleeve may envelop the outside of the insulating member from the midpoint of the spark gap to the cap adjacent the cathode. The outer metallic surfaces of the device may be coated with a hydrogen-impermeable coating to lengthen the shelf life and operating life of the device. The device breaks down at about 1,700 volts for input voltage rates up to 570 volts/millisecond and allows peak discharge currents of up to 3,000 amperes from a 0.3 microfarad energy storage capacitor for more than 1,000 operations.

Boettcher, Gordon E. (Albuquerque, NM)

1984-01-01T23:59:59.000Z

485

Spark gap device for precise switching  

DOE Patents (OSTI)

A spark gap device for precise switching of an energy storage capacitor into an exploding bridge wire load is disclosed. Niobium electrodes having a melting point of 2,415 degrees centigrade are spaced apart by an insulating cylinder to define a spark gap. The electrodes are supported by conductive end caps which, together with the insulating cylinder, form a hermetically sealed chamber filled with an inert, ionizable gas, such as pure xenon. A quantity of solid radioactive carbon-14 within the chamber adjacent the spark gap serves as a radiation stabilizer. The sides of the electrodes and the inner wall of the insulating cylinder are spaced apart a sufficient distance to prevent unwanted breakdown initiation. A conductive sleeve may envelop the outside of the insulating member from the midpoint of the spark gap to the cap adjacent the cathode. The outer metallic surfaces of the device may be coated with a hydrogen-impermeable coating to lengthen the shelf life and operating life of the device. The device breaks down at about 1,700 volts for input voltage rates up to 570 volts/millisecond and allows peak discharge currents of up to 3,000 amperes from a 0.3 microfarad energy storage capacitor for more than 1,000 operations. 3 figs.

Boettcher, G.E.

1984-10-02T23:59:59.000Z

486

Reversible photo-switching in a cell-sized vesicle  

E-Print Network (OSTI)

A photosensitive amphiphilic molecule can switch the shape of an assembled vesicle as determined by microscopic observation. Photo-isomerization induces a change in membrane fluctuation behavior or a morphological transition between ellipsoid and bud shapes, depending on the asymmetrical degree of the initial shape. The mechanism of this reversible photo-switching in the vesicle morphology is interpreted in terms of a change in the effective cross-sectional area of the photosensitive molecule.

Tsutomu Hamada; Yuko T. Sato; Takeshi Nagasaki; Kenichi Yoshikawa

2005-05-07T23:59:59.000Z

487

Studies on a small modified plasma focus opening switch  

Science Journals Connector (OSTI)

The small plasma focus device UNU/ICTP PFF has been modified to test its operation as an opening switch with a plasma filled diode as the load. Recent experiment results on this modified plasma focus opening switch (MPFOS) showing long conduction opening action have been reported [1 2 3]. In this paper a series of experiments to characterize the ion beams produced will be reported.

W. S. Leong; C. S. Wong; P. Choi; S. P. Moo

1997-01-01T23:59:59.000Z

488

Speed limitations of optical switching using a piezoelectric transducer  

E-Print Network (OSTI)

. which will be used in computer simulations to predict results of the experiment. 20 CHAPTER III EXPERIMENTAL CONFIGURATION AND RESULTS 3. 1 Conflguration of Experiment A Michelson interferometer shown in Fig. 3. 1 is used to measure the switching.... which will be used in computer simulations to predict results of the experiment. 20 CHAPTER III EXPERIMENTAL CONFIGURATION AND RESULTS 3. 1 Conflguration of Experiment A Michelson interferometer shown in Fig. 3. 1 is used to measure the switching...

Wang, Chuan-Sheng

2012-06-07T23:59:59.000Z

489

IEEE Transactions on Automation Science and Engineering Compensation of Scanner Creep and Hysteresis  

E-Print Network (OSTI)

IEEE Transactions on Automation Science and Engineering Compensation of Scanner Creep uncertainties associated with creep and hysteresis, and supports automated, computer-controlled manipulation) and by automation, which bypasses the time- consuming

Southern California, University of

490

Switched reluctance motor systems poised for rapid growth  

SciTech Connect

The emergence of a rugged, versatile, and highly efficient alternative to conventional electric motors promises to have a major impact on drivepower markets over the next decade. Although switched reluctance drives are not yet available ``off the shelf`` from major motor manufacturers, they are likely to compete favorably across a broad range of applications, due to their superior performance characteristics. Switched reluctance drives maintain higher torque and efficiency over broader speed ranges than can be achieved with other advanced variable-speed systems, can be programmed to precisely match the loads they serve and, in high-volume production, are likely to be less expensive than competing systems. The principal obstacle to rapid commercialization of switched reluctance motors is the fact that few engineers are trained to perform the exacting and specialized design that this technology requires. This hurdle is gradually being overcome as over two dozen firms now design or manufacture switched reluctance drives, and several are moving into mass production applications. As these and other firms gain experience with the technology, new opportunities will arise for utilities, energy users, and original equipment manufacturers to capture the benefits of switched reluctance motor systems. This report appraises recent progress toward moving switched reluctance drives to mass production and provides an inventory of major manufacturers.

Lovins, A.B.; Howe, B.

1992-12-31T23:59:59.000Z

491

Geodesic Lines, . . . Covariant . . .  

E-Print Network (OSTI)

Geodesic Lines, . . . Covariant . . . Home Page Title Page Page 781 of 818 Go Back Full Screen Close Quit 14.11. Geodesic Lines, Local Gauss-Bonnet Theorem Geodesics play a very important role in surface theory and in dynamics. One of the main reasons why geodesics are so important

Gallier, Jean

492

Transmission Line Security Monitor  

SciTech Connect

The Transmission Line Security Monitor is a multi-sensor monitor that mounts directly on high-voltage transmission lines to detect, characterize and communicate terrorist activity, human tampering and threatening conditions around support towers. For more information about INL's critical infrastructure protection research, visit http://www.facebook.com/idahonationallaboratory.

None

2011-01-01T23:59:59.000Z

493

Transmission Line Security Monitor  

ScienceCinema (OSTI)

The Transmission Line Security Monitor is a multi-sensor monitor that mounts directly on high-voltage transmission lines to detect, characterize and communicate terrorist activity, human tampering and threatening conditions around support towers. For more information about INL's critical infrastructure protection research, visit http://www.facebook.com/idahonationallaboratory.

None

2013-05-28T23:59:59.000Z

494

SWITCH Model Capability Overview Renewable and Appropriate Energy Laboratory http://rael.berkeley.edu/switch November 2012  

E-Print Network (OSTI)

SWITCH Model Capability Overview Renewable and Appropriate Energy Laboratory · http the investment framework captures aspects of wind and solar variability and mitigation measures, Wyoming, Nevada, Colorado, Arizona, New Mexico, Baja Mexico Norte, British Columbia, Alberta Expand

Kammen, Daniel M.

495

Efficient Switches for Solar Power Conversion: Four Quadrant GaN Switch Enabled Three Phase Grid-Tied Microinverters  

SciTech Connect

Solar ADEPT Project: Transphorm is developing power switches for new types of inverters that improve the efficiency and reliability of converting energy from solar panels into useable electricity for the grid. Transistors act as fast switches and control the electrical energy that flows in an electrical circuit. Turning a transistor off opens the circuit and stops the flow of electrical current; turning it on closes the circuit and allows electrical current to flow. In this way a transistor can be used to convert DC from a solar panel into AC for use in a home. Transphorms transistors will enable a single semiconductor device to switch electrical currents at high-voltage in both directionsmaking the inverter more compact and reliable. Transphorm is using Gallium Nitride (GaN) as a semiconductor material in its transistors instead of silicon, which is used in most conventional transistors, because GaN transistors have lower losses at higher voltages and switching frequencies.

None

2012-02-13T23:59:59.000Z

496

From automation to tangible interactive objects  

Science Journals Connector (OSTI)

Abstract Automation led to many innovations for a long time, most of them were developed during the twentieth century. It was commonly thought as a layer on top of a mechanical system. It promoted system management over low-level control. The more information technology evolves, the more it takes a fundamental part in our lives. This article describes a paradigm shift where automation will no longer be an add-on, and where software supports the definition, implementation and operationalization of functions and structures of products from the beginning of the design process. Any design today starts by using computer-aided design tools that enable us to easily draw, modify and fine-tune any kind of system. We can fully develop an airplane and literally fly it as a complex piece of software. Usability and usefulness can be tested before anything physical is built. Consequently, human-centered design (HCD) is now not only feasible but also can drive the overall engineering of products. We have started to design products from outside in, i.e., from usages and purposes to means. We even can 3D print mechanical parts from the software-designed parts with ease. In humancomputer interaction, specific research efforts are carried out on tangible objects, which define this inverted view of automation. We now design and develop by using information technology to do mechanical things, and therefore redefine the essence of a new kind of cognitive mechanical engineering. This article is about the revolution that is currently happening in engineering and industrial design due to the immersive influence of computers in our everyday life, and the expansion of HCD.

Guy Andr Boy

2014-01-01T23:59:59.000Z

497

An automated vacuum gauge calibration system  

SciTech Connect

An automated system for calibrating vacuum gauges over the pressure range of 10{sup {minus}6} to 0.1 Pa was designed and constructed at the National Institute of Standards and Technology (NIST) for the Department of Energy (DOE) Primary Standards Laboratory at Sandia National Laboratories (SNL). Calculable pressures are generated by passing a known flow of gas through an orifice of known conductance. The orifice conductance is derived from dimensional measurements and accurate flows are generated using metal capillary leaks. The expanded uncertainty (k = 2) in the generated pressure is estimated to be between 1% and 4% over the calibration range. The design, calibration results. and component uncertainties will be discussed.

Abbott, P.J. [NIST, GAithersburg, MD (United States); Benner, M.S. [Sandia National Labs., Albuquerque, NM (United States)

1998-04-01T23:59:59.000Z

498

Automated Knowledge Annotation for Dynamic Collaborative Environments  

SciTech Connect

This paper describes the Knowledge Encapsulation Framework (KEF), a suite of tools to enable automated knowledge annotation for modeling and simulation projects. This framework can be used to capture evidence (e.g., facts extracted from journal articles and government reports), discover new evidence (from similar peer-reviewed material as well as social media), enable discussions surrounding domain-specific topics and provide automatically generated semantic annotations for improved corpus investigation. The current KEF implementation is presented within a wiki environment, providing a simple but powerful collaborative space for team members to review, annotate, discuss and align evidence with their modeling frameworks.

Cowell, Andrew J.; Gregory, Michelle L.; Marshall, Eric J.; McGrath, Liam R.

2009-05-19T23:59:59.000Z

499

Automated inspection of hot steel slabs  

DOE Patents (OSTI)

The disclosure relates to a real time digital image enhancement system for performing the image enhancement segmentation processing required for a real time automated system for detecting and classifying surface imperfections in hot steel slabs. The system provides for simultaneous execution of edge detection processing and intensity threshold processing in parallel on the same image data produced by a sensor device such as a scanning camera. The results of each process are utilized to validate the results of the other process and a resulting image is generated that contains only corresponding segmentation that is produced by both processes.

Martin, Ronald J. (Burnsville, MN)

1985-01-01T23:59:59.000Z

500

Honeywell Modular Automation System Computer Software Documentation  

SciTech Connect

The purpose of this Computer Software Document (CSWD) is to provide configuration control of the Honeywell Modular Automation System (MAS) in use at the Plutonium Finishing Plant (PFP). This CSWD describes hardware and PFP developed software for control of stabilization furnaces. The Honeywell software can generate configuration reports for the developed control software. These reports are described in the following section and are attached as addendum's. This plan applies to PFP Engineering Manager, Thermal Stabilization Cognizant Engineers, and the Shift Technical Advisors responsible for the Honeywell MAS software/hardware and administration of the Honeywell System.

STUBBS, A.M.

2000-12-04T23:59:59.000Z