National Library of Energy BETA

Sample records for lighting service-schedule l-1

  1. Types of Lighting in Commercial Buildings - Table L1

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home PageMonthly","10/2015"4,"Ames5 Tables July 1996 Energy Information Administration Office of Coal,Demand Module of the National Energy Modeling System:ChangesL1. Floorspace

  2. Introduction L1-Minimization Reweighted L1 Main Results Noisy Signal Recovery via Iterative Reweighted

    E-Print Network [OSTI]

    Needell, Deanna

    Introduction L1-Minimization Reweighted L1 Main Results Noisy Signal Recovery via Iterative Reweighted L1 Main Results Problem Background Setup 1 Suppose x is an unknown signal in Rd. 2 Design;Introduction L1-Minimization Reweighted L1 Main Results Problem Background Setup 1 Suppose x is an unknown

  3. L1 Stability for scalar balance laws. L1 Stability for scalar balance laws.

    E-Print Network [OSTI]

    Mercier, Magali

    L1 Stability for scalar balance laws. L1 Stability for scalar balance laws. Control 2010 Magali Mercier (Institut Camille Jordan, Lyon) L1 Stability for scalar balance laws. Parma, 15th February 2010 1 / 30 #12;L1 Stability for scalar balance laws. Introduction. Introduction Scalar balance

  4. Math Concepts: L1 and L2 

    E-Print Network [OSTI]

    Irby, Beverly J.; Lara-Alecio, Rafael

    2010-10-22

    stream_source_info Math Concepts(2005).pdf.txt stream_content_type text/plain stream_size 3793 Content-Encoding ISO-8859-1 stream_name Math Concepts(2005).pdf.txt Content-Type text/plain; charset=ISO-8859-1 425 10011... 0010 1010 1101 0001 0100 1011 Math Concepts: L1 and L2 Beverly J. Irby, Ed.D. Professor and Chair Educational Leadership and Counseling Sam Houston State University Rafael Lara-Alecio, Ph.D. Professor and Director Bilingual Programs Educational...

  5. Lighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousand CubicResourcelogo and-E C H N13,CenterCenterLighting Sign In

  6. L1B test results Jos de Kloe,

    E-Print Network [OSTI]

    Stoffelen, Ad

    ADM-Aeolus L1B test results Jos de Kloe, L1B PM16 10-Mar-2009 #12;L2B-PM15, J. de Kloe, 11-Mar-2009 2 Test cases: Base Reference RMS (1) Academic Tests [with/without noise] (27) Sanity Tests (2) Realistic Tests [LITE data] (9) Mispointing Tests [CALIPSO data] (9) #12;L2B-PM15, J. de Kloe, 11-Mar-2009 3

  7. Enhancing tidal harmonic analysis: Robust (hybrid L1 ) solutions

    E-Print Network [OSTI]

    Hickey, Barbara

    Enhancing tidal harmonic analysis: Robust (hybrid L1 =L2 ) solutions Keith E. Leffler Ã, David A 24 February 2008 Accepted 28 April 2008 Keywords: Tides Tidal analysis Harmonic analysis Robust is calculated from the power spectrum of the residual, a calculation that filters broad spectrum noise

  8. Handling Whiting Aboard Fishing Vessels JOSEPH J. L1CCIARDELLO

    E-Print Network [OSTI]

    Handling Whiting Aboard Fishing Vessels JOSEPH J. L1CCIARDELLO Introduction The same fundamental principles for handling fresh fish in general aboard fishing vessels apply to whiting. There- fore, this article will review the factors which influence the quality of fish aboard fishing boats and will offer re

  9. L1 Regularization Path Algorithm for Generalized Linear Models

    E-Print Network [OSTI]

    Hastie, Trevor

    of the paths; we suggest intuitive and flexible strategies for choosing appropriate values. We demonstrate: ^() = argmin {- log L(y; ) + 1}, (2) where > 0 is the regularization parameter. Logistic regression with L1 the most complex stage possible. By generating the regularization path rather than computing solutions

  10. 1Alea , () Convergence rates in weighted L1 spaces

    E-Print Network [OSTI]

    Wefelmeyer, Wolfgang

    processes Anton Schick and Wolfgang Wefelmeyer Anton Schick, Department of Mathematical Sciences, Binghamton (2005), and Schick and Wefelmeyer (2006). The natural distance for densities is given by the L1-norm estimate expectations E[v(X)] by v(x)^g(x) dx for functions v bounded by V , for 1 Anton Schick

  11. Homophilic Adhesion Mechanism of Neurofascin, a Member of the L1 Family of Neural Cell Adhesion Molecules

    SciTech Connect (OSTI)

    Liu, Heli; Focia, Pamela J.; He, Xiaolin (NWU, MED)

    2012-02-13

    The L1 family neural cell adhesion molecules play key roles in specifying the formation and remodeling of the neural network, but their homophilic interaction that mediates adhesion is not well understood. We report two crystal structures of a dimeric form of the headpiece of neurofascin, an L1 family member. The four N-terminal Ig-like domains of neurofascin form a horseshoe shape, akin to several other immunoglobulin superfamily cell adhesion molecules such as hemolin, axonin, and Dscam. The neurofascin dimer, captured in two crystal forms with independent packing patterns, reveals a pair of horseshoes in trans-synaptic adhesion mode. The adhesion interaction is mediated mostly by the second Ig-like domain, which features an intermolecular {beta}-sheet formed by the joining of two individual GFC {beta}-sheets and a large but loosely packed hydrophobic cluster. Mutagenesis combined with gel filtration assays suggested that the side chain hydrogen bonds at the intermolecular {beta}-sheet are essential for the homophilic interaction and that the residues at the hydrophobic cluster play supplementary roles. Our structures reveal a conserved homophilic adhesion mode for the L1 family and also shed light on how the pathological mutations of L1 affect its structure and function.

  12. Ultra-thin L1{sub 0}-FePt for perpendicular anisotropy L1{sub 0}-FePt/Ag/[Co/Pd]{sub 30} pseudo spin valves

    SciTech Connect (OSTI)

    Ho, Pin; Chow, Gan Moog; Chen, Jing-Sheng, E-mail: msecj@nus.edu.sg [Department of Materials Science and Engineering, National University of Singapore, Singapore 117576 (Singapore); Han, Guchang [Data Storage Institute, Agency of Science, Technology and Research (A-STAR), Singapore 117608 (Singapore); He, Kaihua [School of Mathematics and Physics, China University of Geosciences, Wuhan 430074 (China)

    2014-05-07

    Perpendicular anisotropy L1{sub 0}-FePt/Ag/[Co/Pd]{sub 30} pseudo spin valves (PSVs) with ultra-thin L1{sub 0}-FePt alloy free layer possessing high anisotropy and thermal stability have been fabricated and studied. The thickness of the L1{sub 0}-FePt layer was varied between 2 and 4?nm. The PSV became increasingly decoupled with reduced L1{sub 0}-FePt thickness due to the larger difference between the coercivity of the L1{sub 0}-FePt and [Co/Pd]{sub 30} films. The PSV with an ultra-thin L1{sub 0}-FePt free layer of 2?nm displayed a high K{sub u} of 2.21?×?10{sup 7}?ergs/cm{sup 3}, high thermal stability of 84 and a largest giant magnetoresistance of 0.54%.

  13. Application of L1 Minimization Technique to Image Super-Resolution and Surface Reconstruction 

    E-Print Network [OSTI]

    Talavatifard, Habiballah

    2013-05-06

    A surface reconstruction and image enhancement non-linear finite element technique based on minimization of L1 norm of the total variation of the gradient is introduced. Since minimization in the L1 norm is computationally ...

  14. The Lunar L1 Gateway: Portal to the Stars and Beyond

    E-Print Network [OSTI]

    Ross, Shane

    1 The Lunar L1 Gateway: Portal to the Stars and Beyond Martin W. Lo Navigation and Mission Design-30, 2001 #12;2 The Lunar L1 Gateway: Portal to the Stars and Beyond Martin Lo1 , Shane Ross2 Abstract Our Solar System is interconnected by a vast system of tunnels winding around the Sun generated

  15. Root-n consistent density estimators of convolutions in weighted L1-norms

    E-Print Network [OSTI]

    Wefelmeyer, Wolfgang

    Root-n consistent density estimators of convolutions in weighted L1-norms Anton Schick and Wolfgang. Anton Schick was supported by NSF Grant DMS 0405791. 1 #12;2 ANTON SCHICK AND WOLFGANG WEFELMEYER-n rates in L1-spaces. It follows from Schick and Wefelmeyer (2004) that under appropriate conditions on f

  16. L1=Q Approach for efficient computation of disturbance rejection measures for feedback control q

    E-Print Network [OSTI]

    Skogestad, Sigurd

    L1=Q Approach for efficient computation of disturbance rejection measures for feedback control q of disturbance rejection measures, which are useful for assessing the dynamic operability of the process. Using L1 optimal control theory, we consider the cases of steady-state, frequency-wise and dynamic systems

  17. Active form Notch4 promotes the proliferation and differentiation of 3T3-L1 preadipocytes

    SciTech Connect (OSTI)

    Lai, Peng-Yeh [Institute of Molecular Biology and Department of Life Science, National Chung Cheng University, Chiayi 621, Taiwan, ROC (China)] [Institute of Molecular Biology and Department of Life Science, National Chung Cheng University, Chiayi 621, Taiwan, ROC (China); Tsai, Chong-Bin [Institute of Molecular Biology and Department of Life Science, National Chung Cheng University, Chiayi 621, Taiwan, ROC (China) [Institute of Molecular Biology and Department of Life Science, National Chung Cheng University, Chiayi 621, Taiwan, ROC (China); Department of Ophthalmology, Chiayi Christian Hospital, Chiayi 600, Taiwan, ROC (China); Tseng, Min-Jen, E-mail: biomjt@ccu.edu.tw [Institute of Molecular Biology and Department of Life Science, National Chung Cheng University, Chiayi 621, Taiwan, ROC (China)] [Institute of Molecular Biology and Department of Life Science, National Chung Cheng University, Chiayi 621, Taiwan, ROC (China)

    2013-01-18

    Highlights: ? Notch4IC modulates the ERK pathway and cell cycle to promote 3T3-L1 proliferation. ? Notch4IC facilitates 3T3-L1 differentiation by up-regulating proadipogenic genes. ? Notch4IC promotes proliferation during the early stage of 3T3-L1 adipogenesis. ? Notch4IC enhances differentiation during subsequent stages of 3T3-L1 adipogenesis. -- Abstract: Adipose tissue is composed of adipocytes, which differentiate from precursor cells in a process called adipogenesis. Many signal molecules are involved in the transcriptional control of adipogenesis, including the Notch pathway. Previous adipogenic studies of Notch have focused on Notch1 and HES1; however, the role of other Notch receptors in adipogenesis remains unclear. Q-RT-PCR analyses showed that the augmentation of Notch4 expression during the differentiation of 3T3-L1 preadipocytes was comparable to that of Notch1. To elucidate the role of Notch4 in adipogenesis, the human active form Notch4 (N4IC) was transiently transfected into 3T3-L1 cells. The expression of HES1, Hey1, C/EBP? and PPAR? was up-regulated, and the expression of Pref-1, an adipogenic inhibitor, was down-regulated. To further characterize the effect of N4IC in adipogenesis, stable cells expressing human N4IC were established. The expression of N4IC promoted proliferation and enhanced differentiation of 3T3-L1 cells compared with those of control cells. These data suggest that N4IC promoted proliferation through modulating the ERK pathway and the cell cycle during the early stage of 3T3-L1 adipogenesis and facilitated differentiation through up-regulating adipogenic genes such as C/EBP?, PPAR?, aP2, LPL and HSL during the middle and late stages of 3T3-L1 adipogenesis.

  18. Using Arabic (L1) in testing reading comprehension in English (L2) as a foreign language 

    E-Print Network [OSTI]

    Al-Qudairy, Abdullah H. A.

    2011-06-29

    The purpose of this study was to investigate the effect of using Arabic (L1) as a language of questions and answers in testing reading comprehension in English (L2), and to explore student and teacher opinions about ...

  19. Effect of recent L1 exposure on Spanish attrition : an eye-tracking study 

    E-Print Network [OSTI]

    Chamorro Galán, Gloria; Chamorro, Gloria; Galán, Gloria Chamorro

    2013-07-02

    Previous research has shown L1 attrition to be selective (Gürel 2004) and often restricted to structures at the interfaces between syntax and context/pragmatics, but not to occur with syntactic properties that do not ...

  20. Caenorhabditis elegans Battling Starvation Stress: Low Levels of Ethanol Prolong Lifespan in L1 Larvae

    E-Print Network [OSTI]

    Clarke, Steven

    not progress to the L2 stage. Supplementing starved cultures with n-propanol and n-butanol also extended fatty acids and amino acids revealed that L1 larvae can incorporate atoms from ethanol into both types

  1. Light-Light Scattering

    E-Print Network [OSTI]

    Naohiro Kanda

    2011-06-03

    For a long time, it is believed that the light by light scattering is described properly by the Lagrangian density obtained by Heisenberg and Euler. Here, we present a new calculation which is based on the modern field theory technique. It is found that the light-light scattering is completely different from the old expression. The reason is basically due to the unphysical condition (gauge condition) which was employed by the QED calcualtion of Karplus and Neumann. The correct cross section of light-light scattering at low energy of $(\\frac{\\omega}{m} \\ll 1)$ can be written as $ \\displaystyle{\\frac{d\\sigma}{d\\Omega}=\\frac{1}{(6\\pi)^2}\\frac{\\alpha^4} {(2\\omega)^2}(3+2\\cos^2\\theta +\\cos^4\\theta)}$.

  2. Characterization of the L-1 sand using well logs and amplitude attribute analysis 

    E-Print Network [OSTI]

    Ratliff, Thomas Lee

    1989-01-01

    University Chair of Advisory Committee: Dr. Joel S. Watkins The L-1 sand (located in the Gulf Coastal Plain of Texas) is the first sand of the Miocene and lies just above the Anahuac marine shale. Its thickness ranges from 9? 64 feet throughout the study... area. A relatively thick bed of shale ranging from 126 ? 160 feet lies immediately above it, The data set used for this study consists of a three dimensional seismic survey and existing well control. The L-1 sand thickness, sub-sea depth, reservoir...

  3. Cell recognition molecule L1 promotes embryonic stem cell differentiation through the regulation of cell surface glycosylation

    SciTech Connect (OSTI)

    Li, Ying [Department of Biochemistry and Molecular Biology, Dalian Medical University, Dalian 116044 (China) [Department of Biochemistry and Molecular Biology, Dalian Medical University, Dalian 116044 (China); Department of Clinical Laboratory, Second Affiliated Hospital of Dalian Medical University, Dalian 116023 (China); Huang, Xiaohua [Department of Biochemistry and Molecular Biology, Dalian Medical University, Dalian 116044 (China) [Department of Biochemistry and Molecular Biology, Dalian Medical University, Dalian 116044 (China); Department of Clinical Biochemistry, College of Laboratory Medicine, Dalian Medical University, Dalian 116044 (China); An, Yue [Department of Clinical Laboratory, Second Affiliated Hospital of Dalian Medical University, Dalian 116023 (China)] [Department of Clinical Laboratory, Second Affiliated Hospital of Dalian Medical University, Dalian 116023 (China); Ren, Feng [Department of Biochemistry and Molecular Biology, Dalian Medical University, Dalian 116044 (China)] [Department of Biochemistry and Molecular Biology, Dalian Medical University, Dalian 116044 (China); Yang, Zara Zhuyun; Zhu, Hongmei; Zhou, Lei [The Key Laboratory of Stem Cell and Regenerative Medicine, Institute of Molecular and Clinical Medicine, Kunming Medical University, Kunming 650228 (China) [The Key Laboratory of Stem Cell and Regenerative Medicine, Institute of Molecular and Clinical Medicine, Kunming Medical University, Kunming 650228 (China); Department of Anatomy and Developmental Biology, Monash University, Clayton 3800 (Australia); He, Xiaowen; Schachner, Melitta [Keck Center for Collaborative Neuroscience and Department of Cell Biology and Neuroscience, Rutgers University, New Brunswick, NJ (United States)] [Keck Center for Collaborative Neuroscience and Department of Cell Biology and Neuroscience, Rutgers University, New Brunswick, NJ (United States); Xiao, Zhicheng, E-mail: zhicheng.xiao@monash.edu [The Key Laboratory of Stem Cell and Regenerative Medicine, Institute of Molecular and Clinical Medicine, Kunming Medical University, Kunming 650228 (China) [The Key Laboratory of Stem Cell and Regenerative Medicine, Institute of Molecular and Clinical Medicine, Kunming Medical University, Kunming 650228 (China); Department of Anatomy and Developmental Biology, Monash University, Clayton 3800 (Australia); Ma, Keli, E-mail: makeli666@aliyun.com [Department of Biochemistry and Molecular Biology, Dalian Medical University, Dalian 116044 (China)] [Department of Biochemistry and Molecular Biology, Dalian Medical University, Dalian 116044 (China); Li, Yali, E-mail: yalilipaper@gmail.com [Department of Biochemistry and Molecular Biology, Dalian Medical University, Dalian 116044 (China) [Department of Biochemistry and Molecular Biology, Dalian Medical University, Dalian 116044 (China); Department of Anatomy, National University of Singapore, Singapore 119078 (Singapore)

    2013-10-25

    Highlights: •Down-regulating FUT9 and ST3Gal4 expression blocks L1-induced neuronal differentiation of ESCs. •Up-regulating FUT9 and ST3Gal4 expression in L1-ESCs depends on the activation of PLC?. •L1 promotes ESCs to differentiate into neuron through regulating cell surface glycosylation. -- Abstract: Cell recognition molecule L1 (CD171) plays an important role in neuronal survival, migration, differentiation, neurite outgrowth, myelination, synaptic plasticity and regeneration after injury. Our previous study has demonstrated that overexpressing L1 enhances cell survival and proliferation of mouse embryonic stem cells (ESCs) through promoting the expression of FUT9 and ST3Gal4, which upregulates cell surface sialylation and fucosylation. In the present study, we examined whether sialylation and fucosylation are involved in ESC differentiation through L1 signaling. RNA interference analysis showed that L1 enhanced differentiation of ESCs into neurons through the upregulation of FUT9 and ST3Gal4. Furthermore, blocking the phospholipase C? (PLC?) signaling pathway with either a specific PLC? inhibitor or knockdown PLC? reduced the expression levels of both FUT9 and ST3Gal4 mRNAs and inhibited L1-mediated neuronal differentiation. These results demonstrate that L1 promotes neuronal differentiation from ESCs through the L1-mediated enhancement of FUT9 and ST3Gal4 expression.

  4. EE 204.3 (3L-1.5P) Basic Electronics and Electrical Power

    E-Print Network [OSTI]

    Saskatchewan, University of

    inductor and capacitor transient circuits, basic generator and motor principles, basic transformerEE 204.3 (3L-1.5P) Basic Electronics and Electrical Power Department of Electrical and Computer Engineering Fall 2014 Description: This is a basic course on electrical topics for non-electrical engineering

  5. CME 342.3 (3L-1.5P) VLSI Circuit Design

    E-Print Network [OSTI]

    Saskatchewan, University of

    CME 342.3 (3L-1.5P) VLSI Circuit Design Department of Electrical and Computer Engineering Fall 2013 of Electrical and Computer Engineering Office: 3B15 Telephone: 306.966.2507 Email: li.chen@usask.ca Lectures: Monday-Wednesday-Friday, 12:30-13:30, Engineering Building, Room 2C01 Tutorials: N/A Laboratory

  6. Effect of Ag addition to L1{sub 0} FePt and L1{sub 0} FePd films grown by molecular beam epitaxy

    SciTech Connect (OSTI)

    Tokuoka, Y.; Seto, Y.; Kato, T.; Iwata, S.

    2014-05-07

    L1{sub 0} ordered FePt-Ag (5?nm) and FePd-Ag (5?nm) films were grown on MgO (001) substrate at temperatures of 250–400?°C by using molecular beam epitaxy method, and their crystal and surface structures, perpendicular magnetic anisotropies and Curie temperatures were investigated. In the case of FePt-Ag, Ag addition with the amount of 10–20 at.?% was effective to promote L1{sub 0} ordering and granular growth, resulting in the increase of the perpendicular magnetic anisotropy and coercivity of the FePt-Ag films. On the other hand, in the case of FePd-Ag, Ag addition changed the surface morphology from island to continuous film associated with the reductions of its coercivity and perpendicular anisotropy. The variations of lattice constants and Curie temperature with Ag addition were significantly different between FePt-Ag and FePd-Ag. For FePd-Ag, the c and a axes lattice spacings and Curie temperature gradually changed with increasing Ag content, while they unchanged for FePt-Ag. These results suggest the possibility of the formation of FePdAg alloy in FePd-Ag, while Ag segregation in FePt-Ag.

  7. Smart Lighting Controller!! Smart lighting!

    E-Print Network [OSTI]

    Anderson, Betty Lise

    'll build the circuit! We'll use an LED to represent the room lights! #12;4! Block diagram! Battery! Rail! #12;23! LED: light-emitting diode! Diode conducts current in only one direction! When current flows1! Smart Lighting Controller!! #12;2! Smart lighting! No need to spend energy lighting the room if

  8. Aligned and exchange-coupled L1{sub 0} (Fe,Co)Pt-based magnetic films

    SciTech Connect (OSTI)

    Liu, Y.; George, T. A.; Skomski, R.; Sellmyer, D. J. [Department of Physics and Astronomy and Nebraska Center for Materials and Nanoscience, University of Nebraska, Lincoln, Nebraska 68588 (United States)

    2012-04-01

    Films of aligned L1{sub 0}-structure (Fe,Co)Pt with fcc Fe(Co,Pt) are synthesized by co-sputtering Fe, Co, and Pt on an (001) MgO substrate with in situ heating at 830 deg. C. The nanostructures and magnetic properties of the films are characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and superconducting quantum interference device (SQUID). The compositions of the samples (Fe,Co){sub x}Pt{sub 1-x} are designed to maintain an atomic Fe: Co ratio of 65: 35 while increasing the Fe,Co content in each successive sample. In samples with low Fe and Co concentration, the XRD patterns exhibit three strong peaks, namely L1{sub 0} (Fe,Co)Pt (001), L1{sub 0} (Fe,Co)Pt (002), and MgO (002). A fourth peak is observed in samples with high Fe and Co concentration and identified as fcc (002). The XRD patterns confirm the formation of L1{sub 0}-ordered (Fe,Co)Pt and its epitaxial growth on MgO. TEM shows that the (Fe,Co)Pt films form isolated magnetic grains of about 100 nm in diameter. Hysteresis-loop measurements show that the increase of the Fe,Co concentration from 57.3 to 68.3 at % enhances the saturation magnetization M{sub s} from 1245 emu/cm{sup 3} to 1416 emu/cm{sup 3}, and the coercivity decreases from 32 kOe to 8.9 kOe. The nominal maximum energy product per grain is 64 MGOe.

  9. Impact on quality activities of measurement systems meeting an L:1 rule

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hamada, M. S.; Burkhardt, J. H.

    2015-04-30

    This study considers the impact of a measurement system that meets an L:1 rule on various quality activities. These activities include inspection, acceptance sampling, and control charting. A measurement system that meets a 10:1 rule performs much better than one that meets a 4:1 rule. R code is provided so that the practitioner is able to evaluate these activities to his or her particular situation.

  10. L1 Data Cache Decomposition for Energy Efficiency Michael Huang, Jose Renau, Seung-Moon Yoo, and Josep Torrellas

    E-Print Network [OSTI]

    Torrellas, Josep

    L1 Data Cache Decomposition for Energy Efficiency Michael Huang, Jose Renau, Seung-Moon Yoo they will have a power density close to a nuclear reac- tor [9]. Reducing the energy consumption of processor on energy-efficient designs for the L1 data cache. It is well known that smaller caches consume less energy

  11. United States Forest Service - Forest Service Schedule of Proposed Actions

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-EnhancingEt Al.,Turin, New York:Power Company Jump to:Association USEAOpen| Open| Open

  12. Light Properties Light travels at the speed of light `c'

    E-Print Network [OSTI]

    Mojzsis, Stephen J.

    LIGHT!! #12;Light Properties Light travels at the speed of light `c' C = 3 x 108 m/s Or 190,000 miles/second!! Light could travel around the world about 8 times in one second #12;What is light?? Light is a "wave packet" A photon is a "light particle" #12;Electromagnetic Radiation and You Light is sometimes

  13. Electroplated L1{sub 0} CoPt thick-film permanent magnets

    SciTech Connect (OSTI)

    Oniku, Ololade D. Qi, Bin; Arnold, David P.

    2014-05-07

    The fabrication and magnetic characterization of 15-?m-thick electroplated L1{sub 0} CoPt hard magnets with good magnetic properties is reported in this paper. Experimental study of the dependence of the magnets' properties on annealing temperature reveals that an intrinsic coercivity H{sub ci}?=??800?kA/m (10 kOe), squareness >0.8, and energy product of >150?kJ/m{sup 3} are obtained for photolithographically patterned structures (250??m?×?2?mm stripes; 15??m thickness) electroplated on silicon substrates and annealed in hydrogen forming gas at 700?°C. Scanning electron microscopy is used to inspect the morphology of both the as-deposited and annealed magnetic layers, and X-ray Diffractometer analysis on the magnets annealed at 700?°C confirm a phase transformation to an ordered L1{sub 0} CoPt structure, with a minor phase of hcp Co. These thick films are intended for microsystems/MEMS applications.

  14. Cerenkov Light

    ScienceCinema (OSTI)

    Slifer, Karl

    2014-05-22

    The bright blue glow from nuclear reactors is Cerenkov light. Karl Slifer describes how nuclear physicists can use this phenomenon to study the nucleus of the atom.

  15. Cerenkov Light

    SciTech Connect (OSTI)

    Slifer, Karl

    2013-06-13

    The bright blue glow from nuclear reactors is Cerenkov light. Karl Slifer describes how nuclear physicists can use this phenomenon to study the nucleus of the atom.

  16. Lighting Renovations

    Broader source: Energy.gov [DOE]

    When undertaking a lighting renovation in a Federal building, daylighting is the primary renewable energy opportunity. Photovoltaics (PV) also present an excellent opportunity. While this guide...

  17. Effect of substitutional defects on Kambersky damping in L1{sub 0} magnetic materials

    SciTech Connect (OSTI)

    Qu, T.; Victora, R. H.

    2015-02-16

    Kambersky damping, representing the loss of magnetic energy from the electrons to the lattice through the spin orbit interaction, is calculated for L1{sub 0} FePt, FePd, CoPt, and CoPd alloys versus chemical degree of order. When more substitutional defects exist in the alloys, damping is predicted to increase due to the increase of the spin-flip channels allowed by the broken symmetry. It is demonstrated that this corresponds to an enhanced density of states (DOS) at the Fermi level, owing to the rounding of the DOS with loss of long-range order. Both the damping and the DOS of the Co-based alloy are found to be less affected by the disorder. Pd-based alloys are predicted to have lower damping than Pt-based alloys, making them more suitable for high density spintronic applications.

  18. Structural controlled magnetic anisotropy in Heusler L1{sub 0}-MnGa epitaxial thin films

    SciTech Connect (OSTI)

    Wang Kangkang; Lu Erdong; Smith, Arthur R.; Knepper, Jacob W.; Yang Fengyuan

    2011-04-18

    Ferromagnetic L1{sub 0}-MnGa thin films have been epitaxially grown on GaN, sapphire, and MgO substrates using molecular beam epitaxy. Using diffraction techniques, the epitaxial relationships are determined. It is found that the crystalline orientation of the films differ due to the influence of the substrate. By comparing the magnetic anisotropy to the structural properties, a clear correlation could be established indicating that the in-plane and out-of-plane anisotropy is directly determined by the crystal orientation of the film and could be controlled via selection of the substrates. This result could be helpful in tailoring magnetic anisotropy in thin films for spintronic applications.

  19. Transition-metal and metalloid substitutions in L1(0)-ordered FeNi

    SciTech Connect (OSTI)

    Manchanda, P; Skomski, R; Bordeaux, N; Lewis, LH; Kashyap, A

    2014-05-07

    The effect of atomic substitutions on the magnetization, exchange, and magnetocrystalline anisotropy energy of L1(0)-ordered FeNi (tetrataenite) is computationally investigated. The compound naturally occurs in meteorites but has attracted renewed attention as a potential material for permanent magnets, and elemental additives will likely be necessary to facilitate the phase formation. Our density functional theory calculations use the Vienna ab-initio simulation package, applied to 4-atom unit cells of Fe2XNi and 32-atom supercells (X = Al, P, S, Ti, V, Cr, Mn, Fe, Co). While it is found that most additives deteriorate the magnetic properties, there are exceptions: excess substitutional Fe and Co additions improve the magnetization, whereas Cr, S, and interstitial B additions improve the magnetocrystalline anisotropy. (C) 2014 AIP Publishing LLC.

  20. Transition-metal and metalloid substitutions in L1{sub 0}-ordered FeNi

    SciTech Connect (OSTI)

    Manchanda, Priyanka; Skomski, Ralph; Bordeaux, N.; Lewis, L. H.; Kashyap, Arti

    2014-05-07

    The effect of atomic substitutions on the magnetization, exchange, and magnetocrystalline anisotropy energy of L1{sub 0}-ordered FeNi (tetrataenite) is computationally investigated. The compound naturally occurs in meteorites but has attracted renewed attention as a potential material for permanent magnets, and elemental additives will likely be necessary to facilitate the phase formation. Our density functional theory calculations use the Vienna ab-initio simulation package, applied to 4-atom unit cells of Fe{sub 2}XNi and 32-atom supercells (X?=?Al, P, S, Ti, V, Cr, Mn, Fe, Co). While it is found that most additives deteriorate the magnetic properties, there are exceptions: excess substitutional Fe and Co additions improve the magnetization, whereas Cr, S, and interstitial B additions improve the magnetocrystalline anisotropy.

  1. Effect of Surface Characteristics of Metallic Biomaterials on Interaction with Osteoblast Cells , English, L1

    E-Print Network [OSTI]

    Drelich, Jaroslaw W.

    of the oxide film formed on stainless steel and titanium-aluminium-vanadium metal alloys subjected to different of osteoblast cells. A more comprehensive understanding of such relationships can lead to better biomaterial using white light profilometry and atomic force microscopy. The chemical composition of the oxide layers

  2. Lighting in the Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    by your library lights E Kilowatt-hours consumed by your library lights F Annual cost of operating your library lights H Current lighting index for your library ...

  3. Parsing Attrition In Spanish As A Second Language: A Study Of Erosion Of L1 Parsing By L2 Effect 

    E-Print Network [OSTI]

    Olea, Luis

    2012-11-28

    This research investigates parsing attrition by L1 Spanish-L2 English bilinguals in a L2 environment. The aspect taken into consideration is the resolution of ambiguities in relative clauses such as Peter fell in love with the daughter...

  4. Export Control Certification Form H-1B, H-1B1, L-1, or O-1A Visas

    E-Print Network [OSTI]

    Jiang, Jiancheng

    Export Control Certification Form H-1B, H-1B1, L-1, or O-1A Visas Page 1 of 2 Export Control and certification relative to export controlled technology or technical data released to a prospective employee of Commerce or the U.S. Department of State, completing the form means that basic export control issues must

  5. Solar wind plasma correlations between L1 and Earth J. D. Richardson, F. Dashevskiy, and K. I. Paularena

    E-Print Network [OSTI]

    Richardson, John

    1 Solar wind plasma correlations between L1 and Earth J. D. Richardson, F. Dashevskiy, and K. I. Paularena Center for Space Research, Massachusetts Institute of Technology, Cambridge Abstract. Solar wind correlation coefficients are calculated as a function of lag. The average correlations of solar wind speed

  6. Light's Darkness

    ScienceCinema (OSTI)

    Padgett, Miles [University of Glasgow, Glasgow, Scotland

    2010-01-08

    Optical vortices and orbital angular momentum are currently topical subjects in the optics literature. Although seemingly esoteric, they are, in fact, the generic state of light and arise whenever three or more plane waves interfere. To be observed by eye the light must be monochromatic. Laser speckle is one such example, where the optical energy circulates around each black spot, giving a local orbital angular momentum. This talk with report three on-going studies. First, when considering a volume of interfering waves, the laser specs map out threads of complete darkness embedded in the light. Do these threads form loops? Links? Or even knots? Second, when looking through a rapidly spinning window, the image of the world on the other side is rotated: true or false? Finally, the entanglement of orbital angular momentum states means measuring how the angular position of one photons sets the angular momentum of another: is this an angular version of the EPR (Einstein, Podolsky, and Rosen) paradox?

  7. Types of Lights Types of Lights

    E-Print Network [OSTI]

    1 Types of Lights Types of Lights q So far we have studied point lights ­ Radiate in all direc7ons q Other lights ­ Direc7onal lights (posi7on-independent) ­ Spotlights #12;2 Direc1onal Lights q Shine in a single, uniform direc7on q All rays

  8. Light Computing

    E-Print Network [OSTI]

    Gordon Chalmers

    2006-10-13

    A configuration of light pulses is generated, together with emitters and receptors, that allows computing. The computing is extraordinarily high in number of flops per second, exceeding the capability of a quantum computer for a given size and coherence region. The emitters and receptors are based on the quantum diode, which can emit and detect individual photons with high accuracy.

  9. Ubiquitin carboxyl terminal hydrolase L1 negatively regulates TNF{alpha}-mediated vascular smooth muscle cell proliferation via suppressing ERK activation

    SciTech Connect (OSTI)

    Ichikawa, Tomonaga; Li, Jinqing; Dong, Xiaoyu; Potts, Jay D. [Department of Cell Biology and Anatomy, University of South Carolina School of Medicine, Columbia, SC 29208 (United States)] [Department of Cell Biology and Anatomy, University of South Carolina School of Medicine, Columbia, SC 29208 (United States); Tang, Dong-Qi [Department of Pathology, Immunology, and Laboratory Medicine, University of Florida College of Medicine, Gainesville, FL 32610-0275 (United States)] [Department of Pathology, Immunology, and Laboratory Medicine, University of Florida College of Medicine, Gainesville, FL 32610-0275 (United States); Li, Dong-Sheng, E-mail: dsli@yymc.edu.cn [Hubei Key Laboratory of Embryonic Stem Cell Research, Tai He Hospital, Yunyang Medical College, 32 S. Renmin Rd., Shiyan, Hubei 442000 (China)] [Hubei Key Laboratory of Embryonic Stem Cell Research, Tai He Hospital, Yunyang Medical College, 32 S. Renmin Rd., Shiyan, Hubei 442000 (China); Cui, Taixing, E-mail: taixing.cui@uscmed.sc.edu [Department of Cell Biology and Anatomy, University of South Carolina School of Medicine, Columbia, SC 29208 (United States)] [Department of Cell Biology and Anatomy, University of South Carolina School of Medicine, Columbia, SC 29208 (United States)

    2010-01-01

    Deubiquitinating enzymes (DUBs) appear to be critical regulators of a multitude of processes such as proliferation, apoptosis, differentiation, and inflammation. We have recently demonstrated that a DUB of ubiquitin carboxyl terminal hydrolase L1 (UCH-L1) inhibits vascular lesion formation via suppressing inflammatory responses in vasculature. However, the precise underlying mechanism remains to be defined. Herein, we report that a posttranscriptional up-regulation of UCH-L1 provides a negative feedback to tumor necrosis factor alpha (TNF{alpha})-mediated activation of extracellular signal-regulated kinases (ERK) and proliferation in vascular smooth muscle cells (VSMCs). In rat adult VSMCs, adenoviral over-expression of UCH-L1 inhibited TNF{alpha}-induced activation of ERK and DNA synthesis. In contrast, over-expression of UCH-L1 did not affect platelet derived growth factor (PDGF)-induced VSMC proliferation and activation of growth stimulating cascades including ERK. TNF{alpha} hardly altered UCH-L1 mRNA expression and stability; however, up-regulated UCH-L1 protein expression via increasing UCH-L1 translation. These results uncover a novel mechanism by which UCH-L1 suppresses vascular inflammation.

  10. Observations and Measurements of Orbitally Excited L=1 B Mesons at the D0 Experiment

    SciTech Connect (OSTI)

    Williams, Mark Richard James; /Lancaster U.

    2008-09-01

    This thesis describes investigations of the first set of orbitally excited (L = 1) states for both the B{sub d}{sup 0} and B{sub s}{sup 0} meson systems (B**{sub d} and B**{sub s}). The data sample corresponds to 1.35 fb{sup -1} of integrated luminosity, collected in 2002-2006 by the D0 detector, during the Run IIa operation of the Tevatron p{bar p} colliding beam accelerator. The B**{sub d} states are fully reconstructed in decays to B{sup (*)+} {pi}{sup -}, with B{sup (*)+} {yields} {gamma} J/{psi}K{sup +}, J/{psi} {yields} {mu}{sup +}{mu}{sup -}, yielding 662 {+-} 91 events, and providing the first strong evidence for the resolution of two narrow resonances, B{sub 1} and B*{sub 2}. The masses are extracted from a binned {chi}{sup 2} fit to the invariant mass distribution, giving M(B{sub 1}) = 5720.7 {+-} 2.4(stat.) {+-} 1.3(syst.) {+-} 0.5 (PDG) MeV/c{sup 2} and M(B*{sub 2}) = 5746.9 {+-} 2.4(stat.) {+-} 1.0(syst.) {+-} 0.5(PDG) MeV/c{sup 2}. The production rate of narrow B**{sub d} {yields} B{pi} resonances relative to the B{sup +} meson is determined to be [13.9 {+-} 1.9(stat.) {+-} 3.2(syst.)]%. The same B{sup +} sample is also used to reconstruct the analogous states in the B{sub s}{sup 0} system, in decays B**{sub s} {yields} B{sup (*)+} K{sup -}. A single resonance in the invariant mass distribution is found with a statistical significance of 5{sigma}, interpreted as the B*{sub s2} state. The mass is determined to be M(B*{sub s2}) = 5839.6 {+-} 1.1(stat.) {+-} 0.4(syst.) {+-} 0.5(PDG) MeV/c{sup 2}, and the production rate of B*{sub s2} {yields} BK resonances is measured to be a fraction (2.14 {+-} 0.43 {+-} 0.24)% of the corresponding rate for B{sup +} mesons. Alternative fitting hypotheses give inconclusive evidence for the presence of the lighter B{sub s1} meson.

  11. Morris, Alexander From: Sent: To: Subject: FOIA-Central@l1q,dOc.qo'/

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines light on77 PAGEMissionStress Newradical changes atDOECMS-Support Sent

  12. Imperial College London EEE 1L1 Autumn 2009 E2.2 Analogue Electronics E2.2 Analogue Electronics

    E-Print Network [OSTI]

    Papavassiliou, Christos

    Imperial College London ­ EEE 1L1 Autumn 2009 E2.2 Analogue Electronics E2.2 Analogue Electronics Autumn 2009 E2.2 Analogue Electronics What analogue electronics is · Engineering, i.e. the analysis ­ EEE 3L1 Autumn 2009 E2.2 Analogue Electronics analogue electronics is not only · CMOS integrated

  13. ION GNSS 2008, Session C4, Savannah, GA, 16-19 September 2008 1/15 Combined L1 / L2C Tracking Scheme for Weak

    E-Print Network [OSTI]

    Calgary, University of

    frequency ratio between L1 and L2 is directly related to the theoretical scale factor f2 / f1 = 0 is a function of the inverse transmitted frequency, thereby relating L1 and L2 Dopplers through the factor f1 and Navigation (PLAN) Research Group Department of Geomatics Engineering, University of Calgary 2500 University

  14. Residential Lighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMassR&D100Nationalquestionnaires 0 Averagequestionnaires 7tniLighting Sign In

  15. LED Lighting Basics

    Broader source: Energy.gov [DOE]

    Light-Emitting diodes (LEDs) efficiently produce light in a fundamentally different way than any legacy or traditional source of light.

  16. Sandia Energy - (Lighting and) Solid-State Lighting: Science...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Lighting and) Solid-State Lighting: Science, Technology, Economic Perspectives Home Energy Research EFRCs Solid-State Lighting Science EFRC (Lighting and) Solid-State Lighting:...

  17. Sustainable Office Lighting Options

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Sustainable Office Lighting Options Task Lighting: Task lighting is a localized method of lighting a workspace so that additional, unnecessary lighting is eliminated, decreasing energy usage and costs. Illumination levels in the targeted work areas are higher with task lighting than with the ambient levels

  18. QCD and Light-Front Dynamics

    SciTech Connect (OSTI)

    Brodsky, Stanley J.; de Teramond, Guy F.; /SLAC /Southern Denmark U., CP3-Origins /Costa Rica U.

    2011-01-10

    AdS/QCD, the correspondence between theories in a dilaton-modified five-dimensional anti-de Sitter space and confining field theories in physical space-time, provides a remarkable semiclassical model for hadron physics. Light-front holography allows hadronic amplitudes in the AdS fifth dimension to be mapped to frame-independent light-front wavefunctions of hadrons in physical space-time. The result is a single-variable light-front Schroedinger equation which determines the eigenspectrum and the light-front wavefunctions of hadrons for general spin and orbital angular momentum. The coordinate z in AdS space is uniquely identified with a Lorentz-invariant coordinate {zeta} which measures the separation of the constituents within a hadron at equal light-front time and determines the off-shell dynamics of the bound state wavefunctions as a function of the invariant mass of the constituents. The hadron eigenstates generally have components with different orbital angular momentum; e.g., the proton eigenstate in AdS/QCD with massless quarks has L = 0 and L = 1 light-front Fock components with equal probability. Higher Fock states with extra quark-anti quark pairs also arise. The soft-wall model also predicts the form of the nonperturbative effective coupling and its {beta}-function. The AdS/QCD model can be systematically improved by using its complete orthonormal solutions to diagonalize the full QCD light-front Hamiltonian or by applying the Lippmann-Schwinger method to systematically include QCD interaction terms. Some novel features of QCD are discussed, including the consequences of confinement for quark and gluon condensates. A method for computing the hadronization of quark and gluon jets at the amplitude level is outlined.

  19. The PD-1/PD-L1 complex resembles the antigen-binding Fv domains of antibodies and T cell receptors

    SciTech Connect (OSTI)

    Lin, David Yin-wei; Tanaka, Yoshimasa; Iwasaki, Masashi; Gittis, Apostolos G.; Su, Hua-Poo; Mikami, Bunzo; Okazaki, Taku; Honjo, Tasuku; Minato, Nagahiro; Garboczi, David N. (NIH); (Kyoto)

    2008-07-29

    Signaling through the programmed death 1 (PD-1) inhibitory receptor upon binding its ligand, PD-L1, suppresses immune responses against autoantigens and tumors and plays an important role in the maintenance of peripheral immune tolerance. Release from PD-1 inhibitory signaling revives 'exhausted' virus-specific T cells in chronic viral infections. Here we present the crystal structure of murine PD-1 in complex with human PD-L1. PD-1 and PD-L1 interact through the conserved front and side of their Ig variable (IgV) domains, as do the IgV domains of antibodies and T cell receptors. This places the loops at the ends of the IgV domains on the same side of the PD-1/PD-L1 complex, forming a surface that is similar to the antigen-binding surface of antibodies and T cell receptors. Mapping conserved residues allowed the identification of residues that are important in forming the PD-1/PD-L1 interface. Based on the structure, we show that some reported loss-of-binding mutations involve the PD-1/PD-L1 interaction but that others compromise protein folding. The PD-1/PD-L1 interaction described here may be blocked by antibodies or by designed small-molecule drugs to lower inhibitory signaling that results in a stronger immune response. The immune receptor-like loops offer a new surface for further study and potentially the design of molecules that would affect PD-1/PD-L1 complex formation and thereby modulate the immune response.

  20. Lighting Options for Homes.

    SciTech Connect (OSTI)

    Baker, W.S.

    1991-04-01

    This report covers many aspects of various lighting options for homes. Types of light sources described include natural light, artificial light, incandescent lamps, fluorescent lamps, and high intensity discharge lamps. A light source selection guide gives the physical characteristics of these, design considerations, and common applications. Color, strategies for efficient lighting, and types of lighting are discussed. There is one section giving tips for various situations in specific rooms. Rooms and types of fixtures are shown on a matrix with watts saved by using the recommended type lighting for that room and room location. A major emphasis of this report is saving energy by utilizing the most suitable, recommended lighting option. (BN)

  1. Mobile lighting apparatus

    DOE Patents [OSTI]

    Roe, George Michael; Klebanoff, Leonard Elliott; Rea, Gerald W; Drake, Robert A; Johnson, Terry A; Wingert, Steven John; Damberger, Thomas A; Skradski, Thomas J; Radley, Christopher James; Oros, James M; Schuttinger, Paul G; Grupp, David J; Prey, Stephen Carl

    2013-05-14

    A mobile lighting apparatus includes a portable frame such as a moveable trailer or skid having a light tower thereon. The light tower is moveable from a stowed position to a deployed position. A hydrogen-powered fuel cell is located on the portable frame to provide electrical power to an array of the energy efficient lights located on the light tower.

  2. Practical image based lighting 

    E-Print Network [OSTI]

    Lee, Jaemin

    2003-01-01

    information is lighting. Image based lighting that is developed to recover illumination information of the real world from photographs has recently been popular in computer graphics. In this thesis we present a practical image based lighting method. Our...

  3. Light in the city

    E-Print Network [OSTI]

    Srinivasan, Kavita, 1976-

    2002-01-01

    This thesis focuses on enhancing the awareness of light for the pedestrian,and using light as a way of revealing the structure of the city and its relation to the cosmos. It proposes that aesthetic qualities of light inform ...

  4. Advances in Lighting 

    E-Print Network [OSTI]

    Tumber, A. J.

    1981-01-01

    Increasing electricity costs have made a significant impact on lighting. The Illuminating Engineering society (I.E.S.) and the lighting industry are producing new standards, procedures and products to make lighting more appropriate and energy...

  5. Natural lighting and skylights 

    E-Print Network [OSTI]

    Evans, Benjamin Hampton

    1961-01-01

    There are many physiological and psychological factors which enter into the proper design of space for human occupancy. One of these elements is light. Both natural light and manufactured light are basic tools with which any designer must work...

  6. Specific light in sculpture

    E-Print Network [OSTI]

    Powell, John William

    1989-01-01

    Specific light is defined as light from artificial or altered natural sources. The use and manipulation of light in three dimensional sculptural work is discussed in an historic and contemporary context. The author's work ...

  7. Advanced Demand Responsive Lighting

    E-Print Network [OSTI]

    Advanced Demand Responsive Lighting Host: Francis Rubinstein Demand Response Research Center demand responsive lighting systems ­ Importance of dimming ­ New wireless controls technologies · Advanced Demand Responsive Lighting (commenced March 2007) #12;Objectives · Provide up-to-date information

  8. Microstructure and magnetic properties of (001) textured L1(0) FePt films on amorphous glass substrate

    SciTech Connect (OSTI)

    Speliotis, T; Varvaro, G; Testa, AM; Giannopoulos, G; Agostinelli, E; Li, W; Hadjipanayis, G; Niarchos, D

    2015-05-15

    L1(0) FePt thin films with an island-like morphology and magnetic perpendicular anisotropy were grown at low temperature (300 < T-dep< 375 degrees C) by magnetron sputtering on Hoya glass substrates using a 30-nm thick Cr (2 0 0) underlayer. An MgO buffer layer with a thickness of 2 nm was used to inhibit the diffusion from the Cr underlayer and promote the growth of (0 0 1) oriented L1(0) FePt films by inducing an in-plane lattice distortion. By varying the substrate temperature and the Ar sputter pressure (3.5 < P-Ar< 15 mTorr) during the deposition, the degree of chemical order, the microstructure and the magnetic properties were tuned and the best properties in term of squareness ratio (M-r/M-s similar to 0.95) and coercive field (H-c similar to 14 kOe) were observed for films deposited at T-dep = 350 degrees C and P-Ar= 5 mTorr, due to the appearance of a tensile strain, which favors the perpendicular anisotropy. The analysis of the angular dependence of remanent magnetization curves on the optimized sample suggests that the magnetization reversal is highly incoherent due to the inter-island interactions. Our results provide useful information on the low temperature growth of FePt films with perpendicular anisotropy onto glass substrates, which are relevant for a variety of technological applications, such as magnetic recording and spintronic devices. (C) 2015 Elsevier B.V. All rights reserved.

  9. Light Duty Combustion Research: Advanced Light-Duty Combustion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Light Duty Combustion Research: Advanced Light-Duty Combustion Experiments Light Duty Combustion Research: Advanced Light-Duty Combustion Experiments 2009 DOE Hydrogen Program and...

  10. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    are also under consideration. Outside the DOE, the Environmental Protection Agency's Green Lights program promotes energy-efficient lighting as a means to reducing...

  11. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Motivation and Computation of Lighting Measures Floorspace by Lighting Equipment Configuration As described in Appendix A, for each building b, the CBECS data set has the total...

  12. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    more comprehensive understanding of commercial lighting and the potential for lighting energy savings. Steps to build on this analysis can be taken in many directions. One...

  13. Leavenworth Tree Lighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Join HERO for our annual Leavenworth Tree Lighting Ceremony & Shopping SATURDAY DECEMBER 12, 2015 Leavenworth Christmas Lighting Festival Visitors return year after year for some...

  14. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    light by passing electricity through mercury vapor, which causes the fluorescent coating to glow or fluoresce. High-Efficiency Ballast (HEB): A lighting conservation feature...

  15. Exciting White Lighting

    Broader source: Energy.gov [DOE]

    Windows that emit light and are more energy efficient? Universal Display’s PHOLED technology enables windows that have transparent light-emitting diodes in them.

  16. Lighting Controls | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Controls Lighting Controls Use lighting controls to automatically turn lights on and off as needed, and save energy. | Photo courtesy of iStockphoto.comMaliketh. Use lighting...

  17. Light curves from rapidly rotating neutron stars

    E-Print Network [OSTI]

    Numata, Kazutoshi

    2010-01-01

    We calculate light curves produced by a hot spot of a rapidly rotating neutron star, assuming that the spot is perturbed by a core $r$-mode, which is destabilized by emitting gravitational waves. To calculate light curves, we take account of relativistic effects such as the Doppler boost due to the rapid rotation and light bending assuming the Schwarzschild metric around the neutron star. We assume that the core $r$-modes penetrate to the surface fluid ocean to have sufficiently large amplitudes to disturb the spot. For a $l'=m$ core $r$-mode, the oscillation frequency $\\omega\\approx2m\\Omega/[l'(l'+1)]$ defined in the co-rotating frame of the star will be detected by a distant observer, where $l'$ and $m$ are respectively the spherical harmonic degree and the azimuthal wave number of the mode, and $\\Omega$ is the spin frequency of the star. In a linear theory of oscillation, using a parameter $A$ we parametrize the mode amplitudes such that ${\\rm max}\\left(|\\xi_\\theta|,|\\xi_\\phi|\\right)/R=A$ at the surface, w...

  18. Cdc7l1

    E-Print Network [OSTI]

    Toh, Gaik Theng; Masai, Hisao

    2012-01-01

    number ab10535; GenWay Biotech Inc. , ,catalog number 20-number ab17880; GenWay Biotech Inc. , catalog number 20-272-a. Host: Rabbit 1. GenWay Biotech Inc. , catalog number 18-

  19. Cdc7l1

    E-Print Network [OSTI]

    Toh, Gaik Theng; Masai, Hisao

    2012-01-01

    al. 1992; Jackson et al. 1993; Dowell et al. 1994; Dixon andDixon WJ and Campbell JL ; Dowell SJ et al. 1994; Jackson ALBrown GW and Kelly TJ 1998; Dowell SJ et al. 1994; Guo B and

  20. Cdc7l1

    E-Print Network [OSTI]

    Toh, Gaik Theng; Masai, Hisao

    2012-01-01

    origin recognition complex (ORC) recruits Cdc6 and Cdt1pre-RC components (MCMs, ORCs, Cdt1) MCM2-7 complex is theshown to interact with the ORC subunits through its motif-

  1. Cdc7l1

    E-Print Network [OSTI]

    Toh, Gaik Theng; Masai, Hisao

    2012-01-01

    molecular predictor of survival in ovarian cancer, and aspotent anti-cancer target in ovarian and breast carcinomas (in epithelial ovarian carcinoma. Clin Cancer Res, 15, 7.

  2. Pedestrian Friendly Outdoor Lighting

    SciTech Connect (OSTI)

    Miller, N. J.; Koltai, R. N.; McGowan, T. K.

    2013-12-01

    The GATEWAY program followed two pedestrian-scale lighting projects that required multiple mockups – one at Stanford University in California and the other at Chautauqua Institution in upstate New York. The report provides insight into pedestrian lighting criteria, how they differ from street and area lighting criteria, and how solid-state lighting can be better applied in pedestrian applications.

  3. The structural, electronic and dynamic properties of the L1{sub 2}- type Co{sub 3}Ti alloy

    SciTech Connect (OSTI)

    Arikan, Nihat; Özduran, Mustafa

    2014-10-06

    The structural, electronic and dynamic properties of the cubic Co{sub 3}Ti alloy in L1{sub 2} structure have been investigated using a pseudopotential plane wave (PP-PW) method within the generalized gradient approximation proposed by Perdew–Burke–Ernzerhof (GGA-PBE). The structural properties, including the lattice constant, the bulk modulus and its pressure derivative agree reasonably with the previous results. The density of state (DOS), projected density of state (PDOS) and electronic band structure are also reported. The DOS shows that Co{sub 3}Ti alloy has a metallic character since the energy bands cross the Fermi level. The density of states at Fermi level mainly comes from the Co-3d states. Phonon dispersion curves and their corresponding total densities of states were obtained using a linear response in the framework of the density functional perturbation theory. All computed phonon frequencies are no imaginer and thus, Co{sub 3}Ti alloy is dynamically stable. The zone center phonon modes have been founded to be 9.307, 9.626 and 13.891 THz for Co{sub 3}Ti.

  4. Detection of periodic signatures in the solar power spectrum. On the track of l=1 gravity modes

    E-Print Network [OSTI]

    R. A. Garcia; S. Turck-Chieze; S. J. Jimenez-Reyes; J. Ballot; P. L. Palle; A. Eff-Darwich; S. Mathur; J. Provost

    2006-11-27

    In the present work we show robust indications of the existence of g modes in the Sun using 10 years of GOLF data. The present analysis is based on the exploitation of the collective properties of the predicted low-frequency (25 to 140 microHz) g modes: their asymptotic nature, which implies a quasi equidistant separation of their periods for a given angular degree (l). The Power Spectrum (PS) of the Power Spectrum Density (PSD), reveals a significant structure indicating the presence of features (peaks) in the PSD with near equidistant periods corresponding to l=1 modes in the range n=-4 to n=-26. The study of its statistical significance of this feature was fully undertaken and complemented with Monte Carlo simulations. This structure has a confidence level better than 99.86% not to be due to pure noise. Furthermore, a detailed study of this structure suggests that the gravity modes have a much more complex structure than the one initially expected (line-widths, magnetic splittings...). Compared to the latest solar models, the obtained results tend to favor a solar core rotating significantly faster than the rest of the radiative zone. In the framework of the Phoebus group, we have also applied the same methodology to other helioseismology instruments on board SoHO and ground based networks.

  5. Tips: Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tips: Lighting Tips: Lighting Lighting choices save you money. Energy-efficient light bulbs are available in a wide variety of sizes and shapes. Lighting choices save you money....

  6. Deficiencies of Lighting Codes and Ordinances in Controlling Light Pollution from Parking Lot Lighting Installations

    E-Print Network [OSTI]

    Royal, Emily

    2012-05-31

    The purpose of this research was to identify the main causes of light pollution from parking lot electric lighting installations and highlight the deficiencies of lighting ordinances in preventing light pollution. Using an industry-accepted lighting...

  7. IAEA-2006 FRX-L 1/26/06 LA-UR-06-0531 High pressure Field Reversed Configuration plasmas in FRX-L

    E-Print Network [OSTI]

    @lanl.gov We are developing a field reversed configuration (FRC) plasma for application as the target plasma deterioration of FRC's · increased ne, , & plasma pressure, including 0.7 mWb trapped flux duringIAEA-2006 FRX-L 1/26/06 LA-UR-06-0531 High pressure Field Reversed Configuration plasmas in FRX

  8. Propagation of $L^{1}$ and $L^{\\infty}$ Maxwellian weighted bounds for derivatives of solutions to the homogeneous elastic Boltzmann Equation

    E-Print Network [OSTI]

    Ricardo J. Alonso; Irene M. Gamba

    2007-10-27

    We consider the $n$-dimensional space homogeneous Boltzmann equation for elastic collisions for variable hard potentials with Grad (angular) cutoff. We prove sharp moment inequalities, the propagation of $L^1$-Maxwellian weighted estimates, and consequently, the propagation $L^\\infty$-Maxwellian weighted estimates to all derivatives of the initial value problem associated to the afore mentioned problem. More specifically, we extend to all derivatives of the initial value problem associated to this class of Boltzmann equations corresponding sharp moment (Povzner) inequalities and time propagation of $L^1$-Maxwellian weighted estimates as originally developed A.V. Bobylev in the case of hard spheres in 3 dimensions; an improved sharp moments inequalities to a larger class of angular cross sections and $L^1$-exponential bounds in the case of stationary states to Boltzmann equations for inelastic interaction problems with `heating' sources, by A.V. Bobylev, I.M. Gamba and V.Panferov, where high energy tail decay rates depend on the inelasticity coefficient and the the type of `heating' source; and more recently, extended to variable hard potentials with angular cutoff by I.M. Gamba, V. Panferov and C. Villani in the elastic case collision case and so $L^1$-Maxwellian weighted estimated were shown to propagate if initial states have such property. In addition, we also extend to all derivatives the propagation of $L^\\infty$-Maxwellian weighted estimates to solutions of the initial value problem to the Boltzmann equations for elastic collisions for variable hard potentials with Grad (angular) cutoff.

  9. UST_1 stellarator and status of the 3D printed UST_2 stellarator Vicente Queral L 1 UST_1 stellarator and

    E-Print Network [OSTI]

    Columbia University

    UST_1 stellarator and status of the 3D printed UST_2 stellarator Vicente Queral L 1 UST_1 stellarator and Status of the 3D printed UST_2 stellarator Vicente M. Queral* * On leave of absence from NFL and status of the 3D printed UST_2 stellarator Vicente Queral L 2 Background Basic UST_1 and UST_2 data

  10. Tuning the Curie temperature of L1{sub 0} ordered FePt thin films through site-specific substitution of Rh

    SciTech Connect (OSTI)

    Xu, Dongbin; Sun, Cheng-Jun E-mail: msecgm@nus.edu.sg; Heald, Steve M.; Chen, Jing-Sheng; Chow, Gan Moog E-mail: msecgm@nus.edu.sg; Zhou, Tie-Jun; Bergman, Anders; Sanyal, Biplab

    2014-10-14

    In structurally ordered magnetic thin films, the Curie temperature (T{sub C}) of ferromagnetic films depends on the exchange integral of the short range ordered neighboring atoms. The exchange integral may be adjusted by controlling the elemental substitutional concentration at the lattice site of interest. We show how to control the T{sub C} in high anisotropy L1{sub 0} Fe{sub 50}Pt{sub 50} magnetic thin films by substituting Rh into the Pt site. Rh substitution in L1{sub 0} FePt modified the local atomic environment and the corresponding electronic properties, while retaining the ordered L1{sub 0} phase. The analysis of extended x-ray Absorption Fine Structure spectra shows that Rh uniformly substitutes for Pt in L1{sub 0} FePt. A model of antiferromagnetic defects caused by controlled Rh substitution of the Pt site, reducing the T{sub C,} is proposed to interpret this phenomenon and its validity is further examined by ab initio density functional calculations.

  11. Proteomics of Oxidative Stress Using Inducible CYP2E1 Expressing HepG2 Cells and 3T3-L1 Adipocytes as Model Systems 

    E-Print Network [OSTI]

    Newton, Billy Walker

    2012-07-16

    The overall goal of this research was to investigate oxidative stress related changes to the proteomes of 3T3-L1 adipocytes and an inducible CYP2E1 expressing HepG2 cells. Enhanced oxidative stress in hypertrophic adipocytes is associated...

  12. OpenGL Lighting 13. OpenGL Lighting

    E-Print Network [OSTI]

    McDowell, Perry

    OpenGL Lighting 13. OpenGL Lighting · Overview of Lighting in OpenGL In order for lighting to have an effect in OpenGL, two things are required: A light An object to be lit Lights can be set to any color determine how they reflect the light which hits them. The color(s) of an object is determined

  13. CONNECTED LIGHTING SYSTEMS MEETING

    Office of Energy Efficiency and Renewable Energy (EERE)

    There is a lot of buzz today about the Internet of Things and the convergence of intelligent controllable light sources, communication networks, sensors, and data exchange in future lighting...

  14. Fast Light, Fast Neutrinos?

    E-Print Network [OSTI]

    Kevin Cahill

    2011-10-10

    In certain media, light has been observed with group velocities faster than the speed of light. The recent OPERA report of superluminal 17 GeV neutrinos may describe a similar phenomenon.

  15. Kyler Nelson Light Timer

    E-Print Network [OSTI]

    Kachroo, Pushkin

    designated by the user, the Arduino board will dim the light to save energy. The user designates the time instance, the light is dimmed using pulse width modulation (PWM) in the Arduino's pin number 11

  16. Automatic lighting controls demonstration

    SciTech Connect (OSTI)

    Rubinstein, F.; Verderber, R.

    1990-03-01

    The purpose of this work was to demonstrate, in a real building situation, the energy and peak demand reduction capabilities of an electronically ballasted lighting control system that can utilize all types of control strategies to efficiently manage lighting. The project has demonstrated that a state-of-the-art electronically ballasted dimmable lighting system can reduce energy and lighting demand by as least 50% using various combinations of control strategies. By reducing light levels over circulation areas (tuning) and reducing after hours light levels to accommodate the less stringent lighting demands of the cleaning crew (scheduling), lighting energy consumption on weekdays was reduced an average of 54% relative to the initial condition. 10 refs., 14 figs., 3 tabs.

  17. Lighting and Daylight Harvesting 

    E-Print Network [OSTI]

    Bos, J.

    2011-01-01

    in 1992 to serve the lighting design needs of the architectural and interior design communities. With over fifty years of combined experience, our areas of expertise range from architectural and theatrical lighting to custom fixture design. Bos... Lighting Design We are active members of the International Association of Lighting Designers, the American Institute of Architects, the Illuminating Engineering Society, International Dark Skies Association and the United States Green Building Council...

  18. LED Lighting Retrofit 

    E-Print Network [OSTI]

    Shaw-Meadow, N.

    2011-01-01

    kWh is the one that never gets used? ?Dedicated to making environmentally responsible products? Ringdale Introduction LED Roadway Lighting Better Light, Fewer Watts. Period. Nathan Shaw-Meadow LED Lighting Specialist Ringdale ActiveLED ESL.../exponential efficiency growth often deters investment today 7 Challenges to Implementation ESL-KT-11-11-57 CATEE 2011, Dallas, Texas, Nov. 7 ? 9, 2011 ? Municipal Street Light Case Study 8 ? Replaced 400W High Pressure Sodium fixtures with 52W Active...

  19. Light emitting device comprising phosphorescent materials for white light generation

    DOE Patents [OSTI]

    Thompson, Mark E.; Dapkus, P. Daniel

    2014-07-22

    The present invention relates to phosphors for energy downconversion of high energy light to generate a broadband light spectrum, which emit light of different emission wavelengths.

  20. And the Oscar for Sustainable Mobile Lighting Goes to.... Lighting...

    Energy Savers [EERE]

    And the Oscar for Sustainable Mobile Lighting Goes to.... Lighting Up Operations with Hydrogen and Fuel Cell Technology And the Oscar for Sustainable Mobile Lighting Goes to.......

  1. Lighting Design | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Design Lighting Design Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of...

  2. Light extraction from organic light-emitting diodes for lighting applications by sand-blasting

    E-Print Network [OSTI]

    Light extraction from organic light-emitting diodes for lighting applications by sand@ust.hk Abstract: Light extraction from organic light-emitting diodes (OLEDs) by scattering the light is one of the effective methods for large-area lighting applications. In this paper, we present a very simple and cost

  3. Induction Lighting: An Old Lighting Technology Made New Again

    Broader source: Energy.gov [DOE]

    Induction lighting is one of the best kept secrets in energy-efficient lighting. Simply stated, induction lighting is essentially a fluorescent light without electrodes or filaments, the items that...

  4. Lighting the Night: Technology, Urban Life and the Evolution of Street Lighting [Light in Place

    E-Print Network [OSTI]

    Holden, Alfred

    1992-01-01

    Electrical 16. "Highway Lighting by So­ dium Vapor Lamps,"Possibilities of Street: Lighting Improve­ ments," TheLaunches Broad Street Lighting Promotion Campaign," The

  5. ECE 466: LED Lighting Systems -Incandescent lightings rise and

    E-Print Network [OSTI]

    Connors, Daniel A.

    ECE 466: LED Lighting Systems - Incandescent lightings rise and demise via government policy - Alternative Fluorescent light sources and compact fluorescent lights (CFL) to incandescents - Alternative LED light sources - Color index as well as Watts to Lumens efficiency available from all three light sources

  6. Lighting and Surfaces 11.1 Introduction to Lighting

    E-Print Network [OSTI]

    Boyd, John P.

    Chapter 11 Lighting and Surfaces 11.1 Introduction to Lighting Three-dimensional surfaces can react to light, and how computer graphics simulates this. There are three species of light (or "illumination models"): 1. Intrinsic (self-emitting) 2. Ambient light (sometimes called "diffuse light") 3

  7. Sandia Energy - Light Creation Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Light Creation Materials Home Energy Research EFRCs Solid-State Lighting Science EFRC Overview Light Creation Materials Light Creation MaterialsAlyssa Christy2015-03-26T16:28:52+00...

  8. Arnold Schwarzenegger LIGHTING RESEARCH PROGRAM

    E-Print Network [OSTI]

    Project Summaries ELEMENT 2: ADVANCE LIGHTING TECHNOLOGIES PROJECT 2.1 LIGHT EMITTING DIODE (LED light emitting diodes (LED) technology for general lighting applications by developing a task lamp

  9. Domain wall assisted magnetization switching in (111) oriented L1{sub 0} FePt grown on a soft magnetic metallic glass

    SciTech Connect (OSTI)

    Kaushik, Neelam; Sharma, Parmanand; Yubuta, Kunio; Makino, Akihiro; Inoue, Akihisa

    2010-08-16

    We report on growth and magnetic properties of exchange-coupled (111)-L1{sub 0} FePt hard/CoFeTaB soft magnetic metallic glass bilayered structure processed at lower temperature ({approx}400 deg. C). Single phaselike hysteresis loops with tailorable coercivity (<8.2 kOe) in out of plane direction are obtained. The magnetization switching mechanism is identified as domain wall assisted. In views of excellent nanofabrication abilities of metallic glass thin film and the ability to grow preferred oriented L1{sub 0} FePt, the present bilayered structure is very promising for the fabrication of high density bit--patterned magnetic recording media and other spintronic devices.

  10. High efficiency incandescent lighting

    DOE Patents [OSTI]

    Bermel, Peter; Ilic, Ognjen; Chan, Walker R.; Musabeyoglu, Ahmet; Cukierman, Aviv Ruben; Harradon, Michael Robert; Celanovic, Ivan; Soljacic, Marin

    2014-09-02

    Incandescent lighting structure. The structure includes a thermal emitter that can, but does not have to, include a first photonic crystal on its surface to tailor thermal emission coupled to, in a high-view-factor geometry, a second photonic filter selected to reflect infrared radiation back to the emitter while passing visible light. This structure is highly efficient as compared to standard incandescent light bulbs.

  11. National Synchrotron Light Source

    ScienceCinema (OSTI)

    BNL

    2009-09-01

    A tour of Brookhaven's National Synchrotron Light Source (NSLS), hosted by Associate Laboratory Director for Light Sources, Stephen Dierker. The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviolet, and x-ray light for basic and applied research in physics, chemistry, medicine, geophysics, environmental, and materials sciences.

  12. Faster Than Light?

    E-Print Network [OSTI]

    Robert Geroch

    2010-05-10

    It is argued that special relativity remains a viable physical theory even when there is permitted signals traveling faster than light.

  13. Comparing Light Bulbs

    Office of Energy Efficiency and Renewable Energy (EERE)

    In this exercise, students will use a light to demonstrate the difference between being energy-efficient and energy-wasteful, and learn what energy efficiency means.

  14. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Illuminance Assignments for CBECS Building Activity Categories Illuminance ranges were adopted from the 1987 Illuminating Engineering Society (IES) Lighting Handbook. The IES...

  15. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    from the engineering literature, based on CBECS building activity.) 4. Efficacy: an energy efficiency measure. Technically, the amount of light produced per unit of energy...

  16. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    (CEC), March 1990. Advanced Lighting Technologies Application Guidelines (ALTAG), Building and Appliance Efficiency Office. 3. Dubin, F.S., Mindell, H.L., and Bloome, S., 1976....

  17. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    energy are presented in this section. Statistics are presented by subgroups based on building characteristics, and by subgroups based on lighting equipment. The three sets of...

  18. Edmund G. Brown Jr. LIGHTING CALIFORNIA'S FUTURE

    E-Print Network [OSTI]

    Edmund G. Brown Jr. Governor LIGHTING CALIFORNIA'S FUTURE: SMART LIGHT-EMITTING DIODE LIGHTING's Future: Smart LightEmitting Diode Lighting in Residential Fans. California Energy Commission, PIER

  19. 2015/06/03(new-updates) The 2015 Academia Sinica Shuttle Bus Service Schedule

    E-Print Network [OSTI]

    Chen, Sheng-Wei

    NTU Information Building( near to Starbucks on Xinhai Road) NTU Fu Bell NTU Multi-Purpose Classroom Building( near to Starbucks on Xinhai Road) NTU Fu Bell NTU Multi-Purpose Classroom Building ()( 3 ) Bus Kong Monument) NTU Information Building( near to Starbucks on Xinhai Road) A.S. 2. 09:40 A.S. NTU

  20. Explosively pumped laser light

    DOE Patents [OSTI]

    Piltch, Martin S. (Los Alamos, NM); Michelotti, Roy A. (Los Alamos, NM)

    1991-01-01

    A single shot laser pumped by detonation of an explosive in a shell casing. The shock wave from detonation of the explosive causes a rare gas to luminesce. The high intensity light from the gas enters a lasing medium, which thereafter outputs a pulse of laser light to disable optical sensors and personnel.

  1. Light intensity compressor

    DOE Patents [OSTI]

    Rushford, Michael C. (Livermore, CA)

    1990-01-01

    In a system for recording images having vastly differing light intensities over the face of the image, a light intensity compressor is provided that utilizes the properties of twisted nematic liquid crystals to compress the image intensity. A photoconductor or photodiode material that is responsive to the wavelength of radiation being recorded is placed adjacent a layer of twisted nematic liquid crystal material. An electric potential applied to a pair of electrodes that are disposed outside of the liquid crystal/photoconductor arrangement to provide an electric field in the vicinity of the liquid crystal material. The electrodes are substantially transparent to the form of radiation being recorded. A pair of crossed polarizers are provided on opposite sides of the liquid crystal. The front polarizer linearly polarizes the light, while the back polarizer cooperates with the front polarizer and the liquid crystal material to compress the intensity of a viewed scene. Light incident upon the intensity compressor activates the photoconductor in proportion to the intensity of the light, thereby varying the field applied to the liquid crystal. The increased field causes the liquid crystal to have less of a twisting effect on the incident linearly polarized light, which will cause an increased percentage of the light to be absorbed by the back polarizer. The intensity of an image may be compressed by forming an image on the light intensity compressor.

  2. Lighting affects appearance LightSource emits photons

    E-Print Network [OSTI]

    Jacobs, David

    1 Lighting affects appearance #12;2 LightSource emits photons Photons travel in a straight line). And then some reach the eye/camera. #12;3 Reflectance Model how objects reflect light. Model light sources Algorithms for computing Shading: computing intensities within polygons Determine what light strikes what

  3. VIRTUAL LIGHT: DIGITALLY-GENERATED LIGHTING FOR VIDEO CONFERENCING APPLICATIONS

    E-Print Network [OSTI]

    Greenberg, Albert

    VIRTUAL LIGHT: DIGITALLY-GENERATED LIGHTING FOR VIDEO CONFERENCING APPLICATIONS Andrea Basso method to improve the lighting conditions of a real scene or video sequence. In particular we concentrate on modifying real light sources intensities and inserting virtual lights into a real scene viewed from a fixed

  4. LightBox -Exploring Interaction Modalities with Colored Light

    E-Print Network [OSTI]

    of light to very subtle animations, transitions and dimmed lighting effects. Implementation LightBox is housed in an aluminum suitcase measuring 48x38x25cm. The lid of the suitcase contains a panel of 12x12 Design. Figure 1. An animated lighting sequence visualized on the hi-power LEDs of LightBox #12

  5. Indoor positioning algorithm using light-emitting diode visible light

    E-Print Network [OSTI]

    Kavehrad, Mohsen

    Indoor positioning algorithm using light- emitting diode visible light communications Zhou Zhou of Use: http://spiedl.org/terms #12;Indoor positioning algorithm using light-emitting diode visible light. This paper proposes a novel indoor positioning algorithm using visible light communications (VLC

  6. White light velocity interferometer

    DOE Patents [OSTI]

    Erskine, D.J.

    1999-06-08

    The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

  7. Green Light Pulse Oximeter

    DOE Patents [OSTI]

    Scharf, John Edward (Oldsmar, FL)

    1998-11-03

    A reflectance pulse oximeter that determines oxygen saturation of hemoglobin using two sources of electromagnetic radiation in the green optical region, which provides the maximum reflectance pulsation spectrum. The use of green light allows placement of an oximetry probe at central body sites (e.g., wrist, thigh, abdomen, forehead, scalp, and back). Preferably, the two green light sources alternately emit light at 560 nm and 577 nm, respectively, which gives the biggest difference in hemoglobin extinction coefficients between deoxyhemoglobin, RHb, and oxyhemoglobin, HbO.sub.2.

  8. Lakeview Light and Power- Commercial Lighting Rebate Program

    Broader source: Energy.gov [DOE]

    Lakeview Light and Power offers a commercial lighting rebate program. Rebates apply to the installation of energy efficient lighting retrofits in non-residential buildings. The rebate program is...

  9. Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting

    SciTech Connect (OSTI)

    None

    2009-11-01

    A U.S. Department of Energy Solid-State Lighting Gateway Report on a Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting in Lija Loop, Portland, Oregon.

  10. Columbia Water & Light- HVAC and Lighting Efficiency Rebates

    Broader source: Energy.gov [DOE]

    Columbia Water & Light (CWL) offers rebates to its commercial and industrial customers for the purchase of high efficiency HVAC installations and efficient lighting. Incentives for certain...

  11. Peninsula Light Company- Commercial Efficient Lighting Rebate Program

    Broader source: Energy.gov [DOE]

    Peninsula Light Company (PLC) offers a rebate program for commercial customers who wish to upgrade to energy efficient lighting. Participating customers must be served by PLC commercial service....

  12. Light Vector Mesons

    E-Print Network [OSTI]

    Alexander Milov

    2008-12-21

    This article reviews the current status of experimental results obtained in the measurement of light vector mesons produced in proton-proton and heavy ion collisions at different energies. The review is focused on two phenomena related to the light vector mesons; the modification of the spectral shape in search of Chiral symmetry restoration and suppression of the meson production in heavy ion collisions. The experimental results show that the spectral shape of light vector mesons are modified compared to the parameters measured in vacuum. The nature and the magnitude of the modification depends on the energy density of the media in which they are produced. The suppression patterns of light vector mesons are different from the measurements of other mesons and baryons. The mechanisms responsible for the suppression of the mesons are not yet understood. Systematic comparison of existing experimental results points to the missing data which may help to resolve the problem.

  13. lighting in the library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    lamp produces about 1750 lumens. Footcandle: a lumen of light distributed over a 1-square-foot (0.09-square-meter) area. Ideal Illumination: the minimum number of footcandles...

  14. Solid State Lighting Reliability

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solid State Lighting Reliability 2015Building Technologies Office Peer Review Lynn Davis, PhD RTI International ldavis@rti.org --- 919-316-3325 Project Summary Timeline: Start...

  15. The Facts of Light

    E-Print Network [OSTI]

    Horn, Berthold K.P.

    This is a random collection of facts about radiant and luminous energy. Some of this information may be useful in the design of photo-diode image sensors, in the set-up of lighting for television microscopes and the ...

  16. National Synchrotron Light Source

    ScienceCinema (OSTI)

    None

    2010-01-08

    A tour of Brookhaven's National Synchrotron Light Source (NSLS). The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviole

  17. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    5.2 152.6 160.5 54.6 Assembly Health Care Lodging Office 0 20 40 60 80 100 120 140 160 180 Energy Information Administration Energy Consumption Series: Lighting in Commercial...

  18. Solid state lighting component

    DOE Patents [OSTI]

    Yuan, Thomas; Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald

    2010-10-26

    An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

  19. Solid state lighting component

    DOE Patents [OSTI]

    Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald; Yuan, Thomas

    2012-07-10

    An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

  20. Light and Plants Plants use light to photosynthesize. Name two places that light can come from

    E-Print Network [OSTI]

    Koptur, Suzanne

    Light and Plants Plants use light to photosynthesize. Name two places that light can come from: 1 (CO2, a gas) from the air and turn it into SUGARS (food). This process is powered by energy from light plants) for energy. Photosynthetically Active Radiation (PAR) is a combination of red light and blue

  1. LED Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    focusing light in ways that are useful in homes and commercial settings. The light-emitting diode (LED) is one of today's most energy-efficient and rapidly-developing lighting...

  2. Energy Conservation in Industrial Lighting 

    E-Print Network [OSTI]

    Meharg, E.

    1979-01-01

    were identified. Savings in power and cost were quantified for typical examples as follows: Task lighting, high light source efficacy, high luminaire mounting height, efficient luminaires, surroundings painted a light color, regular luminaire cleaning...

  3. Higher order light propagation volumes

    E-Print Network [OSTI]

    Martin, Timothy Ly; Martin, Timothy Ly

    2012-01-01

    1.1 Introduction . . . . . . . . . 1.2 Light Propagation4.1.1 Injection of Virtual Point Lights and Geometryof the Stanford bunny, lit by an area light, rendered using

  4. Light as a Healing Mechanism

    E-Print Network [OSTI]

    Lingampalli, Nithya

    2013-01-01

    S. (1991). Meridians conduct light. Moskow: Raum and Zeit.the bod’ys absorption of light. Explore, 9(2), doi: https://01). The healing use of light and color. Health Care Design

  5. Lighting and the Bottom Line 

    E-Print Network [OSTI]

    Christensen, M.

    1981-01-01

    A discussion of the cost of light and how it relates to the cost of people. The new Illuminating Engineering Society recommended method of determining lighting levels will be explained. Also several ways of providing good lighting to increase...

  6. New Light Sources for Tomorrow's Lighting Designs 

    E-Print Network [OSTI]

    Krailo, D. A.

    1986-01-01

    and lighting systems. Table 2 shows the development of four-foot energy-saving retrofit lamps. By utilizing new cathode designed and different gas fills, 34-watt energy-saving lamps were developed that operate on existing rapid start ballasts and afford... of fluorescent lamps, two watts of system power are consumed in heating the lamp cath odes. The shedding of cathode heating wattage was the next lamp efficiency improvement to be introduced. One available sy tern dis connects the lamp cathodes from...

  7. Lighting Design | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    as part of your whole-house design -- an approach for building an energy-efficient home. Indoor Lighting Design When designing indoor lighting for energy efficiency,...

  8. GATEWAY Demonstrations: LED Street Lighting

    SciTech Connect (OSTI)

    Cook, Tyson; Shackelford, Jordan; Pang, Terrance Pang

    2008-12-01

    This report summarizes an assessment project conducted to study the performance of light emitting diode (LED) luminaires in a street lighting application in San Francisco, CA.

  9. Interior Lighting Efficiency for Municipalities

    Broader source: Energy.gov [DOE]

    This webinar covered a basic understanding of lighting, different types of lamps and luminaries, importance of energy efficiency in lighting, and knowledge of where to find financial resources.

  10. 2010 US Lighting Market Characterization

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2010 U.S. Lighting Market Characterization January 2012 Prepared for: Solid-State Lighting Program Building Technologies Program Office of Energy Efficiency and Renewable Energy...

  11. Lighting Controls | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    fluorescent lighting fixtures rather than replace them. Dimmers and LEDs Some light-emitting diode (LED) lightbulbs can be used with dimmers. LED bulbs and fixtures must be...

  12. Lighting affects appearance LightSource emits photons

    E-Print Network [OSTI]

    Jacobs, David

    1 Lighting affects appearance #12;2 LightSource emits photons Photons travel in a straight line). And then some reach the eye/camera. #12;3 Basic fact: Light is linear Double intensity of sources, double photons reaching eye. Turn on two lights, and photons reaching eye are same as sum of number when each

  13. Quasi light fields: extending the light field to coherent radiation

    E-Print Network [OSTI]

    Wornell, Gregory W.

    Quasi light fields: extending the light field to coherent radiation Anthony Accardi1,2 and Gregory light field, and for coherent radiation using electromagnetic field theory. We present a model of coherent image formation that strikes a balance between the utility of the light field

  14. Interior Light Level Measurements Appendix F -Interior Light Level Measurements

    E-Print Network [OSTI]

    Appendix F ­ Interior Light Level Measurements #12;F.1 Appendix F - Interior Light Level. A potential concern is that a lower VT glazing may increase electric lighting use to compensate for lost qualify and quantify a representative loss of daylighting, and therefore electric lighting use

  15. Demonstration Assessment of LED Roadway Lighting: Philadelphia...

    Office of Scientific and Technical Information (OSTI)

    LED Roadway Lighting: Philadelphia, PA Royer, Michael P.; Tuenge, Jason R.; Poplawski, Michael E. Roadway Lighting; Solid-state lighting; LED lighting; SSL; LED; GATEWAY Roadway...

  16. Lighting Principles and Terms | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Principles and Terms Lighting Principles and Terms Light quantity, energy consumption, and light quality are the basic principles of lighting. | Photo courtesy of

  17. Testimonials - Partnerships in LED Lighting - Philips Lumileds...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LED Lighting - Philips Lumileds Lighting, LLC Testimonials - Partnerships in LED Lighting - Philips Lumileds Lighting, LLC Addthis An error occurred. Try watching this video on...

  18. Light Quark Mass Reweighting

    E-Print Network [OSTI]

    Qi Liu; Norman H. Christ; Chulwoo Jung

    2012-06-01

    We present a systematic study of the effectiveness of light quark mass reweighting. This method allows a single lattice QCD ensemble, generated with a specific value of the dynamical light quark mass, to be used to determine results for other, nearby light dynamical quark masses. We study two gauge field ensembles generated with 2+1 flavors of dynamical domain wall fermions with light quark masses m_l=0.02 (m_\\pi=620 MeV) and m_l=0.01 (m_\\pi=420 MeV). We reweight each ensemble to determine results which could be computed directly from the other and check the consistency of the reweighted results with the direct results. The large difference between the 0.02 and 0.01 light quark masses suggests that this is an aggressive application of reweighting as can be seen from fluctuations in the magnitude of the reweighting factor by four orders of magnitude. Never-the-less, a comparison of the reweighed topological charge, average plaquette, residual mass, pion mass, pion decay constant, and scalar correlator between these two ensembles shows agreement well described by the statistical errors. The issues of the effective number of configurations and finite sample size bias are discussed. An examination of the topological charge distribution implies that it is more favorable to reweight from heavier mass to lighter quark mass.

  19. Are Light Gluinos Dead?

    E-Print Network [OSTI]

    Glennys R. Farrar

    1997-07-25

    Not yet. ALEPH's recent exclusion limit employs an aggressive determination of theoretical uncertainties using a simplified application of the Bayesian method. The validity of their analysis can be evaluated by its further implications, such as contradicting the existence a b quark and requiring relations between hadronic event-shape observables which are not observed. Traditional error estimation methods result in a much larger estimate for the theoretical uncertainties. This puts the ALEPH and also Csikor-Fodor limits at the $\\sim 1~ \\sigma$ level for the very light gluino scenario. A recent astrophysical result implies direct searches will be more difficult than previously anticipated, adding to the importance of reducing the QCD uncertainty in predictions sensitive to indirect effects of light gluinos. Some possible indications in favor of a light gluino are noted.

  20. Light harvesting arrays

    DOE Patents [OSTI]

    Lindsey, Jonathan S. (Raleigh, NC)

    2002-01-01

    A light harvesting array useful for the manufacture of devices such as solar cells comprises: (a) a first substrate comprising a first electrode; and (b) a layer of light harvesting rods electrically coupled to the first electrode, each of the light harvesting rods comprising a polymer of Formula I: X.sup.1.paren open-st.X.sup.m+1).sub.m (I) wherein m is at least 1, and may be from two, three or four to 20 or more; X.sup.1 is a charge separation group (and preferably a porphyrinic macrocycle, which may be one ligand of a double-decker sandwich compound) having an excited-state of energy equal to or lower than that of X.sup.2, and X.sup.2 through X.sup.m+1 are chromophores (and again are preferably porphyrinic macrocycles).

  1. Pupillary efficient lighting system

    DOE Patents [OSTI]

    Berman, Samuel M. (San Francisco, CA); Jewett, Don L. (Mill Valley, CA)

    1991-01-01

    A lighting system having at least two independent lighting subsystems each with a different ratio of scotopic illumination to photopic illumination. The radiant energy in the visible region of the spectrum of the lighting subsystems can be adjusted relative to each other so that the total scotopic illumination of the combined system and the total photopic illumination of the combined system can be varied independently. The dilation or contraction of the pupil of an eye is controlled by the level of scotopic illumination and because the scotopic and photopic illumination can be separately controlled, the system allows the pupil size to be varied independently of the level of photopic illumination. Hence, the vision process can be improved for a given level of photopic illumination.

  2. Sneaky light stop

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Eifert, Till; Nachman, Benjamin

    2015-02-20

    A light supersymmetric top quark partner (stop) with a mass nearly degenerate with that of the standard model (SM) top quark can evade direct searches. The precise measurement of SM top properties such as the cross-section has been suggested to give a handle for this ‘stealth stop’ scenario. We present an estimate of the potential impact a light stop may have on top quark mass measurements. The results indicate that certain light stop models may induce a bias of up to a few GeV, and that this effect can hide the shift in, and hence sensitivity from, cross-section measurements. Duemore »to the different initial states, the size of the bias is slightly different between the LHC and the Tevatron. The studies make some simplifying assumptions for the top quark measurement technique, and are based on truth-level samples.« less

  3. Light emitting ceramic device

    DOE Patents [OSTI]

    Valentine, Paul; Edwards, Doreen D.; Walker, Jr., William John; Slack, Lyle H.; Brown, Wayne Douglas; Osborne, Cathy; Norton, Michael; Begley, Richard

    2010-05-18

    A light-emitting ceramic based panel, hereafter termed "electroceramescent" panel, is herein claimed. The electroceramescent panel is formed on a substrate providing mechanical support as well as serving as the base electrode for the device. One or more semiconductive ceramic layers directly overlay the substrate, and electrical conductivity and ionic diffusion are controlled. Light emitting regions overlay the semiconductive ceramic layers, and said regions consist sequentially of a layer of a ceramic insulation layer and an electroluminescent layer, comprised of doped phosphors or the equivalent. One or more conductive top electrode layers having optically transmissive areas overlay the light emitting regions, and a multi-layered top barrier cover comprising one or more optically transmissive non-combustible insulation layers overlay said top electrode regions.

  4. Radioluminescent lighting technology

    SciTech Connect (OSTI)

    Not Available

    1990-01-01

    The glow-in-the-dark stereotype that characterizes the popular image of nuclear materials is not accidental. When the French scientist, Henri Becquerel, first discovered radioactivity in 1896, he was interested in luminescence. Radioluminescence, the production of light from a mixture of energetic and passive materials, is probably the oldest practical application of the unstable nucleus. Tritium-based radioluminescent lighting, in spite of the biologically favorable character of the gaseous tritium isotope, was included in the general tightening of environmental and safety regulations. Tritium light manufacturers would have to meet two fundamental conditions: (1) The benefit clearly outweighed the risk, to the extent that even the perceived risk of a skeptical public would be overcome. (2) The need was significant enough that the customer/user would be willing and able to afford the cost of regulation that was imposed both in the manufacture, use and eventual disposal of nuclear materials. In 1981, researchers at Oak Ridge National Laboratory were investigating larger radioluminescent applications using byproduct nuclear material such as krypton-85, as well as tritium. By 1982, it appeared that large source, (100 Curies or more) tritium gas tube, lights might be useful for marking runways and drop zones for military operations and perhaps even special civilian aviation applications. The successful development of this idea depended on making the light bright enough and demonstrating that large gas tube sources could be used and maintained safely in the environment. This successful DOE program is now in the process of being completed and closed-out. Working closely with the tritium light industry, State governments and other Federal agencies, the basic program goals have been achieved. This is a detailed report of what they have learned, proven, and discovered. 91 refs., 29 figs., 5 tabs. (JF)

  5. Light is Heavy

    E-Print Network [OSTI]

    van der Mark, M B

    2015-01-01

    Einstein's relativity theory appears to be very accurate, but at times equally puzzling. On the one hand, electromagnetic radiation must have zero rest mass in order to propagate at the speed of light, but on the other hand, since it definitely carries momentum and energy, it has non-zero inertial mass. Hence, by the principle of equivalence, it must have non-zero gravitational mass, and so, light must be heavy. In this paper, no new results will be derived, but a possibly surprising perspective on the above paradox is given.

  6. Solid State Lighting

    SciTech Connect (OSTI)

    Hastbacka, Mildred; Dieckmann, John; Bouza, Antonio

    2013-03-30

    The article discusses solid state lighting technologies. This topic was covered in two previous ASHRAE Journal columns (2010). This article covers advancements in technologies and the associated efficacies. The life-cycle, energy savings and market potential of these technologies are addressed as well.

  7. Influence of stoichiometry and growth temperature on the crystal structure and magnetic properties of epitaxial L1{sub 0} Fe-Pd (001) films

    SciTech Connect (OSTI)

    Chang, Y. C. [Department of Material Science and Engineering, National Tsing Hua University, Hsinchu 300, Taiwan (China); National Synchrotron Radiation Research Center, Hsinchu 30077, Taiwan (China); Hsiao, S. N., E-mail: pmami.hsiao@gmail.com; Liu, Y. T.; Lee, H. Y., E-mail: hylee@nsrrc.org.tw [National Synchrotron Radiation Research Center, Hsinchu 30077, Taiwan (China); Liu, S. H.; Chen, S. K. [Department of Material Science and Engineering, Feng Chia University, Taichung 407, Taiwan (China); Sun, A. C. [Department of Chemical Engineering and Material Science, YunZe University, Chungli 135, Taiwan (China); Dhu, J. G., E-mail: jgdhu@nthu.edu.tw [Department of Material Science and Engineering, National Tsing Hua University, Hsinchu 300, Taiwan (China)

    2014-05-07

    To investigate the crystallographic structure and the magnetic properties as a function of chemical composition (40–62 at. %) and substrate temperature (T{sub s}?=?300–550?°C), we fabricated epitaxial FePd films of thickness 20?±?2?nm by sputtering on MgO (100) single-crystal substrates. The ordering parameter, measured by x-ray diffraction with synchrotron radiation, and the perpendicular anisotropy of the Fe{sub 54}Pt{sub 46} films increased with increasing substrate temperature. For FePd films (T{sub s}?=?550?°C) with varied Fe content, a direct correlation between the ordering parameter and the magnetocrystalline anisotropy field is found. The greatest ordering parameter, 0.84, and magnetocrystalline anisotropy field, ?20 kOe, were obtained for FePd films of Fe concentration 54 at. %, indicating that an off-stoichiometric L1{sub 0} FePd might be preferable for engineering and applications.

  8. Demonstration Assessment of Light-Emitting Diode Roadway Lighting...

    Office of Scientific and Technical Information (OSTI)

    New York Citation Details In-Document Search Title: Demonstration Assessment of Light-Emitting Diode Roadway Lighting on the FDR Drive in New York, New York This a report about a...

  9. Light Dance : light and the nature of body movement

    E-Print Network [OSTI]

    Riskin, Seth

    1989-01-01

    Light Dance is a conscious transfiguration of the body, its movement and the encompassing space; a transposition of matter to light exalted in the dance. This corresponds to the conceptualized spirit of the performer whose ...

  10. Making fuel from light: Argonne research sheds light on photosynthesis...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Making fuel from light: Argonne research sheds light on photosynthesis and creation of solar fuel By Jo Napolitano * September 1, 2015 Tweet EmailPrint Refined by nature over a...

  11. Fusion pumped light source

    DOE Patents [OSTI]

    Pappas, Daniel S. (Los Alamos, NM)

    1989-01-01

    Apparatus is provided for generating energy in the form of light radiation. A fusion reactor is provided for generating a long, or continuous, pulse of high-energy neutrons. The neutron flux is coupled directly with the lasing medium. The lasing medium includes a first component selected from Group O of the periodic table of the elements and having a high inelastic scattering cross section. Gamma radiation from the inelastic scattering reactions interacts with the first component to excite the first component, which decays by photon emission at a first output wavelength. The first output wavelength may be shifted to a second output wavelength using a second liquid component responsive to the first output wavelength. The light outputs may be converted to a coherent laser output by incorporating conventional optics adjacent the laser medium.

  12. Scattering Of Light Nuclei

    SciTech Connect (OSTI)

    Quaglioni, S; Navratil, P; Roth, R

    2009-12-15

    The exact treatment of nuclei starting from the constituent nucleons and the fundamental interactions among them has been a long-standing goal in nuclear physics. Above all nuclear scattering and reactions, which require the solution of the many-body quantum-mechanical problem in the continuum, represent an extraordinary theoretical as well as computational challenge for ab initio approaches.We present a new ab initio many-body approach which derives from the combination of the ab initio no-core shell model with the resonating-group method [4]. By complementing a microscopic cluster technique with the use of realistic interactions, and a microscopic and consistent description of the nucleon clusters, this approach is capable of describing simultaneously both bound and scattering states in light nuclei. We will discuss applications to neutron and proton scattering on sand light p-shell nuclei using realistic nucleon-nucleon potentials, and outline the progress toward the treatment of more complex reactions.

  13. OLEDS FOR GENERAL LIGHTING

    SciTech Connect (OSTI)

    Anil Duggal; Don Foust; Chris Heller; Bill Nealon; Larry Turner; Joe Shiang; Nick Baynes; Tim Butler; Nalin Patel

    2004-02-29

    The goal of this program was to reduce the long term technical risks that were keeping the lighting industry from embracing and developing organic light-emitting diode (OLED) technology for general illumination. The specific goal was to develop OLEDs for lighting to the point where it was possible to demonstrate a large area white light panel with brightness and light quality comparable to a fluorescence source and with an efficacy comparable to that of an incandescent source. it was recognized that achieving this would require significant advances in three area: (1) the improvement of white light quality for illumination, (2) the improvement of OLED energy efficiency at high brightness, and (3) the development of cost-effective large area fabrication techniques. The program was organized such that, each year, a ''deliverable'' device would be fabricated which demonstrated progress in one or more of the three critical research areas. In the first year (2001), effort concentrated on developing an OLED capable of generating high illumination-quality white light. Ultimately, a down-conversion method where a blue OLED was coupled with various down-conversion layers was chosen. Various color and scattering models were developed to aid in material development and device optimization. The first year utilized this approach to deliver a 1 inch x 1 inch OLED with higher illumination-quality than available fluorescent sources. A picture of this device is shown and performance metrics are listed. To their knowledge, this was the first demonstration of true illumination-quality light from an OLED. During the second year, effort concentrated on developing a scalable approach to large area devices. A novel device architecture consisting of dividing the device area into smaller elements that are monolithically connected in series was developed. In the course of this development, it was realized that, in addition to being scalable, this approach made the device tolerant to the most common OLED defect--electrical shorts. This architecture enabled the fabrication of a 6 inch x 6 inch OLED deliverable for 2002. A picture of this deliverable is shown and the performance metrics are listed. At the time, this was the highest efficiency, highest lumen output illumination-quality OLED in existence. The third year effort concentrated on improving the fabrication yield of the 6 inch x 6 inch devices and improving the underlying blue device efficiency. An efficiency breakthrough was achieved through the invention of a new device structure such that now 15 lumen per watt devices could be fabricated. A 2 feet x 2 feet OLED panel consisting of sixteen 6 inch x 6 inch high efficiency devices tiled together was then fabricated. Pictures of this panel are shown with performance metrics listed. This panel met all project objectives and was the final deliverable for the project. It is now the highest efficiency, highest lumen output, illumination-quality OLED in existence.

  14. Solid State Lighting Reliability

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy BillsNo.Hydrogen4EnergySolid State Lighting Reliability 2014 Building

  15. LED Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    are directional, focusing light in ways that are useful in homes and commercial settings. The light-emitting diode (LED) is one of today's most energy-efficient and...

  16. An International Year of Light

    E-Print Network [OSTI]

    Faure, Claudie

    of light-based technologies for the equitable development of global society. The project received, renewable energy and energy efficiency, and for PROSPECTUS An International Year of Light Science ­ Technology ­ Nature ­ Culture ­ Development

  17. Photodetector with enhanced light absorption

    DOE Patents [OSTI]

    Kane, James (Lawrenceville, NJ)

    1985-01-01

    A photodetector including a light transmissive electrically conducting layer having a textured surface with a semiconductor body thereon. This layer traps incident light thereby enhancing the absorption of light by the semiconductor body. A photodetector comprising a textured light transmissive electrically conducting layer of SnO.sub.2 and a body of hydrogenated amorphous silicon has a conversion efficiency about fifty percent greater than that of comparative cells. The invention also includes a method of fabricating the photodetector of the invention.

  18. Webinar: Fuel Cell Mobile Lighting

    Broader source: Energy.gov [DOE]

    Video recording of the Fuel Cell Technologies Office webinar, Fuel Cell Mobile Lighting, originally presented on November 13, 2012.

  19. Faster than Light Quantum Communication

    E-Print Network [OSTI]

    A. Y. Shiekh

    2008-04-05

    Faster than light communication might be possible using the collapse of the quantum wave-function without any accompanying paradoxes.

  20. Lighting and Dark Sky Regulations

    E-Print Network [OSTI]

    Radcliffe, David

    Lighting and Dark Sky Regulations Marjorie Palmer Spring 2008 #12;The UGA Land Use Clinic provides Road, Room 101 Athens, GA 30602-1510 (706) 583-0373 · Fax (706) 583-0612 jroskie@uga.edu #12;Lighting......................................................................................................................................1 II. Approaches to Lighting Regulation

  1. Radiation, Matter and Energy What is light?

    E-Print Network [OSTI]

    Shirley, Yancy

    Radiation, Matter and Energy #12;What is light? #12;Light is an electromagnetic wave #12;Light is an electromagnetic wave #12;#12;Light is also a particle Photons: "pieces" of light, each with precise wavelength the visible spectrum, blue light has higher energy than red light Within the electromagnetic spectrum, X

  2. Light Board Operation 208 Jordan Hall

    E-Print Network [OSTI]

    Buechler, Steven

    Light Board Operation 208 Jordan Hall Using the Light Board 1. Turn on the lights next to the entry door. 2. Turn on the Light Board lights (illustration 1). The light switch is on the west wall, slightly behind the computer cart's display. 3. Locate the lapel microphone (usually on top of the Light

  3. Pedestrian Friendly Outdoor Lighting

    SciTech Connect (OSTI)

    Miller, Naomi J.; Koltai, Rita; McGowan, Terry

    2013-12-31

    This GATEWAY report discusses the problems of pedestrian lighting that occur with all technologies with a focus on the unique optical options and opportunities offered by LEDs through the findings from two pedestrian-focused projects, one at Stanford University in California, and one at the Chautauqua Institution in upstate New York. Incorporating user feedback this report reviews the tradeoffs that must be weighed among visual comfort, color, visibility, efficacy and other factors to stimulate discussion among specifiers, users, energy specialists, and in industry in hopes that new approaches, metrics, and standards can be developed to support pedestrian-focused communities, while reducing energy use.

  4. National Lighting Energy Consumption

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing Tool Fits the BillDepartmentSites KDFNational Fuel Cell andEnergy NationalLighting

  5. Extragalactic Background Light

    Office of Scientific and Technical Information (OSTI)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield MunicipalTechnical Report:Speeding accessby aLED Street Lighting HostDISCLAIMERlinacSYNCHROTRON

  6. Lighting Market Characterization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousand CubicResourcelogo and-E C H2015 Non-Residential Lighting Market

  7. Lighting Test Facilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousand CubicResourcelogo and-E C H2015 Non-Residential Lighting

  8. Lighting in the Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousand CubicResourcelogo and-E C H2015 Non-Residential LightingThe

  9. Lighting Principles and Terms | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Light quantity, energy consumption, and light quality are the basic principles of lighting. | Photo courtesy of

  10. Embodied Energy and Off-Grid Lighting

    E-Print Network [OSTI]

    Alstone, Peter

    2012-01-01

    Self-reported Impacts of LED Lighting Technology Compared to2011. Adoption of LED Lighting by Night Market Vendors inbased to rechargeable LED lighting. However, as with most

  11. Types of Lighting | Department of Energy

    Energy Savers [EERE]

    For a technical comparison of the different types of lighting, visit Energy Basics. External Resources Find a Lighting Designer - International Association of Lighting...

  12. Demand Responsive Lighting: A Scoping Study

    E-Print Network [OSTI]

    Rubinstein, Francis; Kiliccote, Sila

    2007-01-01

    3 3.0 Previous Experience with Demand Responsive Lighting11 4.3. Prevalence of Lighting13 4.4. Impact of Title 24 on Lighting

  13. Ecological Consequences of Artificial Night Lighting

    E-Print Network [OSTI]

    Piselli, Kathy

    2006-01-01

    of Artificial Night Lighting Catherine Rich and Travisof artificial night lighting. This book provides editedage of modern urban lighting was ushered in. Coincidentally,

  14. LIGHTING CONTROLS: SURVEY OF MARKET POTENTIAL

    E-Print Network [OSTI]

    Verderber, R.R.

    2010-01-01

    REFERENCES Task Report to Lighting Systems Research,Berkeley Laboratory, "Lighting Control System Market1980). Task Report to Lighting Systems Research, Lawrence

  15. LED Outdoor Area Lighting Fact Sheet

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Outdoor Area Lighting LED technology is rapidly becoming competitive with high-intensity discharge light sources for outdoor area lighting. This document reviews the major design...

  16. Controls for Solid-State Lighting

    E-Print Network [OSTI]

    Rubinstein, Francis

    2007-01-01

    of controlling LED lighting using the DALI protocol. Figurewith dimming white LED lighting depending on whether the LEDthe promising hybrid LED lighting systems are: 1. LED Hybrid

  17. Measuring Light Reflectance of BGO Crystal Surfaces

    E-Print Network [OSTI]

    Janecek, Martin

    2009-01-01

    Carlo program simulating light propagation in isotropic orTerms—Lambertian reflection, light collection, Monte Carloy-axis) and fraction specular light (right y- axis) for a

  18. Light propagation and Imaging in Indefinite Metamaterials

    E-Print Network [OSTI]

    Yao, Jie

    2010-01-01

    photolithography by polarized light,” Applied PhysicsZhang, “Imaging visible light using anisotropic metamaterialcross-sectional review of the light propagation of TE mode (

  19. The CD36, CLA-1(CD36L1), and LIMPII (CD36L2) gene family: Cellular distribution, chromosomal location, and genetic evolution

    SciTech Connect (OSTI)

    Calvo, D.; Vega, M.A.; Dopazo, J.

    1995-01-01

    CD36, CLA-1, and LIMPII are single polypeptide membrane glycoproteins, and the genes encoding them constitute a recently described gene family. In the present paper, a cDNA encoding the human lysosomal membrane protein LIMPII was used to determine its expression pattern in cells of various lineages. Like CLA-1, and in contrast with the restricted expression of CD36, the expression of LIMPII is widespread. Mapping of the human LIMPII and CLA-1 genes (gene symbols CD36L2 and CD36L1, respectively) to specific chromosomes revealed that CLA-1, LIMPII, and CD36 do not form a gene cluster, but are found dispersed on chromosomes 12, 4, and 7, respectively. These data, together with the phylogenetic analysis carried out for the members of this family, indicate that the LIMPII, CIA-1, and CD36 genes diverged early in evolution from an ancestor gene, possibly before the divergence between the arthropods and the vertebrates. 48 refs., 5 figs.

  20. Energy Savings Estimates of Light Emitting Diodes in Niche Lighting...

    Broader source: Energy.gov (indexed) [DOE]

    in Niche Lighting Applications Prepared for: Building Technologies Program Office of Energy Efficiency and Renewable Energy U.S. Department of Energy Prepared by: Navigant...

  1. Advanced Light Extraction Material for OLED Lighting | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Extraction Material for OLED Lighting Lead Performer: Pixelligent Technologies LLC - Baltimore, MD Partners: OLEDWorks LLC DOE Total Funding: 1,000,000 Project Term: April 6,...

  2. Solar optics: light as energy; energy as light

    SciTech Connect (OSTI)

    Bennett, D.J.; Eijadi, D.A.

    1980-05-01

    a prominent characteristic of earth-sheltered and underground buildings, as well as buildings designed to accommodate more uses within the same perimeters, is the prominence of interior space without direct access to natural light and view opportunities. Solar Optics, a technique for illuminating interior spaces with natural light, offers a way to satisfy the well-documented human affinity for natural light. The system, which uses a heliostat to track the sun and lenses and mirrors to direct the light to remote interior spaces, is more efficient than converting solar radiation into electricity. Through the use of cold mirrors, it is also possible to separate the infrared portion of the spectrum from visible light, thereby creating a cool light source that can reduce a building's space cooling demand. Solar Optics also offers energy savings by transmitting light through a small aperture, as opposed to a large window. Several design problems must still be addressed. The system will be demonstrated in a new building at the University of Minnesota. Because this is a limited demonstration, it does not include the integration of a natural light system with a central source light system...another promising application of Solar Optics.

  3. LIGHTING CONTROLS: SURVEY OF MARKET POTENTIAL

    E-Print Network [OSTI]

    Verderber, R.R.

    2010-01-01

    Floors Floor Area Lighting Power Density Light Output Lampenergy den- sity and power density for lighting to 3.5 kWh/Lighting Level (Lumens/Watt) (Footcandles) Power Density (

  4. Sandia Energy - Lighting Developments to 2030

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lighting Developments to 2030 Home Energy Research EFRCs Solid-State Lighting Science EFRC Lighting Developments to 2030 Lighting Developments to 2030Tara Camacho-Lopez2015-05-14T1...

  5. Tips: Shopping for Lighting | Department of Energy

    Energy Savers [EERE]

    Lighting Tips: Shopping for Lighting July 17, 2014 - 7:27pm Addthis With an array of lighting options, use the Lighting Facts label to determine the right lightbulb for you. |...

  6. Analysis of light transport in scattering media

    E-Print Network [OSTI]

    Mukaigawa, Yasuhiro

    We propose a new method to analyze light transport in homogeneous scattering media. The incident light undergoes multiple bounces in translucent objects, and produces a complex light field. Our method analyzes the light ...

  7. Light Meson Distribution Amplitudes

    E-Print Network [OSTI]

    R. Arthur; P. A. Boyle; D. Brömmel; M. A. Donnellan; J. M. Flynn; A. Jüttner; H. Pedroso de Lima; T. D. Rae; C. T. Sachrajda; B. Samways

    2010-11-12

    We calculated the first two moments of the light-cone distribution amplitudes for the pseudoscalar mesons ($\\pi$ and $K$) and the longitudinally polarised vector mesons ($\\rho$, $K^*$ and $\\phi$) as part of the UKQCD and RBC collaborations' $N_f=2+1$ domain-wall fermion phenomenology programme. These quantities were obtained with a good precision and, in particular, the expected effects of $SU(3)$-flavour symmetry breaking were observed. Operators were renormalised non-perturbatively and extrapolations to the physical point were made, guided by leading order chiral perturbation theory. The main results presented are for two volumes, $16^3\\times 32$ and $24^3\\times 64$, with a common lattice spacing. Preliminary results for a lattice with a finer lattice spacing, $32^3\\times64$, are discussed and a first look is taken at the use of twisted boundary conditions to extract distribution amplitudes.

  8. Directed light fabrication

    SciTech Connect (OSTI)

    Lewis, G.K.; Nemec, R.; Milewski, J.; Thoma, D.J.; Cremers, D.; Barbe, M.

    1994-09-01

    Directed Light Fabrication (DLF) is a rapid prototyping process being developed at Los Alamos National Laboratory to fabricate metal components. This is done by fusing gas delivered metal powder particles in the focal zone of a laser beam that is, programmed to move along or across the part cross section. Fully dense metal is built up a layer at a time to form the desired part represented by a 3 dimensional solid model from CAD software. Machine ``tool paths`` are created from the solid model that command the movement and processing parameters specific to the DLF process so that the part can be built one layer at a time. The result is a fully dense, near net shape metal part that solidifies under rapid solidification conditions.

  9. Northeast Energy Efficiency Partnerships: Advanced Lighting Controls...

    Energy Savers [EERE]

    Northeast Energy Efficiency Partnerships: Advanced Lighting Controls Northeast Energy Efficiency Partnerships: Advanced Lighting Controls Credit: Northeast Energy Efficiency...

  10. 2014 Solid-State Lighting Project Portfolio

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    White LED Light Engines ... A-23 Phosphor Systems for Illumination Quality Solid State Lighting Products ... A-24...

  11. 1 Data from Farrell et al 2006; GHG based on IPCC 100a; Net energy = fuel energy (MJ L-1) -energy input (MJ) A survey of the literature, by NREL, indicates that there are > 60 ethanol studies

    E-Print Network [OSTI]

    Pennycook, Steve

    ; Net energy = fuel energy (MJ L-1) - energy input (MJ) ·A survey of the literature, by NREL, indicates year hourly simulation 3. Can predict ozone 3. Align AQ modeling to NREL's LCA model 1. Additional NREL Role ­ Develop air pollutant emissions inventory for all processes in NREL LCA model · PM

  12. Automatic Mechetronic Wheel Light Device

    DOE Patents [OSTI]

    Khan, Mohammed John Fitzgerald (Silver Spring, MD)

    2004-09-14

    A wheel lighting device for illuminating a wheel of a vehicle to increase safety and enhance aesthetics. The device produces the appearance of a "ring of light" on a vehicle's wheels as the vehicle moves. The "ring of light" can automatically change in color and/or brightness according to a vehicle's speed, acceleration, jerk, selection of transmission gears, and/or engine speed. The device provides auxiliary indicator lights by producing light in conjunction with a vehicle's turn signals, hazard lights, alarm systems, and etc. The device comprises a combination of mechanical and electronic components and can be placed on the outer or inner surface of a wheel or made integral to a wheel or wheel cover. The device can be configured for all vehicle types, and is electrically powered by a vehicle's electrical system and/or battery.

  13. Light-Like Noncommutativity, Light-Front Quantization and New Light on UV/IR Mixing

    E-Print Network [OSTI]

    M. M. Sheikh-Jabbari; A. Tureanu

    2010-10-02

    We revisit the problem of quantizing field theories on noncommutative Moyal spacetime with \\emph{light-like} noncommutativity. To tackle the issues arising from noncommuting and hence nonlocal time, we argue that for this case light-front quantization procedure should be employed. In this appropriate quantization scheme we perform the non-planar loop analysis for the light-like noncommutative field theories. One of the important and peculiar features of light-front quantization is that the UV cutoff of the light-cone Hamiltonian manifests itself as an IR cutoff for the light-cone momentum, $p^+$. Due to this feature, the naive results of covariant quantization for the light-like case allude to the absence of the UV/IR mixing in the light-front quantization. However, by a careful analysis of non-planar loop integrals we show that this is not the case and the UV/IR mixing persists. In addition, we argue in favour of the perturbative unitarity of light-like noncommutative field theories in the light-front quantization scheme.

  14. Status of Light Gaugino Scenarios

    E-Print Network [OSTI]

    Glennys R. Farrar

    1997-10-08

    I summarize recent devlopments in supersymmetry scenarios which leave some or all gauginos light. The emphasis is on experimental and phenomenological progress in the past year.

  15. Fluorescent Lighting | Department of Energy

    Office of Environmental Management (EM)

    - by far the most common form of fluorescent lighting but rarely found in residential buildings -- are much more energy efficient than incandescent lamps and are ideally suited...

  16. Incandescent Lighting | Department of Energy

    Office of Environmental Management (EM)

    courtesy of iStockphotoTokenPhoto. Incandescent lamps are often considered the least energy efficient type of electric lighting commonly found in residential buildings....

  17. Linac Coherent Light Source Overview

    Office of Energy Efficiency and Renewable Energy (EERE)

    Take an animated tour of the Linac Coherent Light Source (LCLS). Follow the laser pulse from the injector gun all the way through to the Far Experimental Hall.

  18. Linac Coherent Light Source Overview

    ScienceCinema (OSTI)

    None

    2013-05-29

    Take an animated tour of the Linac Coherent Light Source (LCLS). Follow the laser pulse from the injector gun all the way through to the Far Experimental Hall.

  19. Common Industrial Lighting Upgrade Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    is used to regulate the ongoing electricity provided to the lamp. COMMON INDUSTRIAL LIGHTING UPGRADE TECHNOLOGIES Due to the phase-out of the incandescent bulb and magnetic...

  20. Shedding Light on Nanocrystal Defects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Shedding Light on Nanocrystal Defects Print Nanocrystals have been the focus of much scientific interest lately, given their various advantageous mechanical properties. Their...

  1. Pedestrian-Friendly Nighttime Lighting

    Broader source: Energy.gov [DOE]

    This November 19, 2013 webinar presented issues and considerations related to pedestrian-friendly nighttime lighting, such as color rendering, safety, and adaptation. When it comes to outdoor...

  2. Light-by-Light Scattering Effect in Light-Cone Supergraphs

    E-Print Network [OSTI]

    Renata Kallosh; Pierre Ramond

    2010-06-24

    We give a relatively simple explanation of the light-cone supergraph prediction for the UV properties of the maximally supersymmetric theories. It is based on the existence of a dynamical supersymmetry which is not manifest in the light-cone supergraphs. It suggests that N=4 supersymmetric Yang-Mills theory is UV finite and N=8 supergravity is UV finite at least until 7 loops whereas the $n$-point amplitudes have no UV divergences at least until $L=n+3$. Here we show that this prediction can be deduced from the properties of light-cone supergraphs analogous to the light-by-light scattering effect in QED. A technical aspect of the argument relies on the observation that the dynamical supersymmetry action is, in fact, a compensating field-dependent gauge transformation required for the retaining the light-cone gauge condition $A_+=0$.

  3. Ramsey spectroscopy with squeezed light

    E-Print Network [OSTI]

    Kenan Qu; G. S. Agarwal

    2013-07-12

    Traditional Ramsey spectroscopy has the frequency resolution $2\\pi/T$, where $T$ is the time separation between two light fields. Using squeezed states and two-atom excitation joint detection, we present a new scheme achieving a higher resolution $\\pi/T$. We use two mode squeezed light which exhibits strong entanglement.

  4. The Linac Coherent Light Source

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    White, William E.; Robert, Aymeric; Dunne, Mike

    2015-05-01

    The Linac Coherent Light Source (LCLS) at the SLAC National Accelerator Laboratory was the first hard X-ray free-electron laser (FEL) to operate as a user facility. After five years of operation, LCLS is now a mature FEL user facility. Our personal views about opportunities and challenges inherent to these unique light sources are discussed.

  5. Turbo-Charged Lighting Design 

    E-Print Network [OSTI]

    Clark, W. H. II

    1992-01-01

    , which has many spaces with different task-specific lighting standards. The author was challenged by lighting-level requirements that spanned the range of possibilities, and was able to devise an accurate, expedient solution using a dBase language program...

  6. Lighting with Paint FABIO PELLACINI

    E-Print Network [OSTI]

    Pellacini, Fabio

    Lighting with Paint FABIO PELLACINI Dartmouth College and FRANK BATTAGLIA, R. KEITH MORLEY of trials to obtain a suitable result. We present an interactive system wherein an artist paints desired look. The artist can paint color, light shape, shadows, highlights, and reflections using a suite

  7. Device structure for OLED light device having multi element light extraction and luminescence conversion layer

    DOE Patents [OSTI]

    Antoniadis; Homer (Mountain View, CA), Krummacher; Benjamin Claus (Regensburg, DE)

    2008-01-22

    An apparatus such as a light source has a multi-element light extraction and luminescence conversion layer disposed over a transparent layer of the light source and on the exterior of said light source. The multi-element light extraction and luminescence conversion layer includes a plurality of light extraction elements and a plurality of luminescence conversion elements. The light extraction elements diffuses the light from the light source while luminescence conversion elements absorbs a first spectrum of light from said light source and emits a second spectrum of light.

  8. OLED lighting devices having multi element light extraction and luminescence conversion layer

    DOE Patents [OSTI]

    Krummacher, Benjamin Claus (Regensburg, DE); Antoniadis, Homer (Mountain View, CA)

    2010-11-16

    An apparatus such as a light source has a multi element light extraction and luminescence conversion layer disposed over a transparent layer of the light source and on the exterior of said light source. The multi-element light extraction and luminescence conversion layer includes a plurality of light extraction elements and a plurality of luminescence conversion elements. The light extraction elements diffuses the light from the light source while luminescence conversion elements absorbs a first spectrum of light from said light source and emits a second spectrum of light.

  9. Quasi light fields: Extending the light field to coherent radiation

    E-Print Network [OSTI]

    Accardi, Anthony J.

    Imaging technologies such as dynamic viewpoint generation are engineered for incoherent radiation using the traditional light field, and for coherent radiation using electromagnetic field theory. We present a model of ...

  10. Light Front Quantization with the Light Cone Gauge

    E-Print Network [OSTI]

    D. G. C. McKeon; Chenguang Zhao

    2015-10-07

    The Dirac procedure for dealing with constraints is applied to the quantization of gauge theories on the light front. The light cone gauge is used in conjunction with the first class constraints that arise and the resulting Dirac brackets are found. These gauge conditions are not used to eliminate degrees of freedom from the action prior to applying the Dirac constraint procedure. This approach is illustrated by considering Yang-Mills theory and the superparticle in a 2 + 1 dimensional target space.

  11. Inorganic volumetric light source excited by ultraviolet light

    DOE Patents [OSTI]

    Reed, S.; Walko, R.J.; Ashley, C.S.; Brinker, C.J.

    1994-04-26

    The invention relates to a composition for the volumetric generation of radiation. The composition comprises a porous substrate loaded with a component capable of emitting radiation upon interaction with an exciting radiation. Preferably, the composition is an aerogel substrate loaded with a component, e.g., a phosphor, capable of interacting with exciting radiation of a first energy, e.g., ultraviolet light, to produce radiation of a second energy, e.g., visible light. 4 figures.

  12. Inorganic volumetric light source excited by ultraviolet light

    DOE Patents [OSTI]

    Reed, Scott (Albuquerue, NM); Walko, Robert J. (Albuquerue, NM); Ashley, Carol S. (Albuquerue, NM); Brinker, C. Jeffrey (Albuquerue, NM)

    1994-01-01

    The invention relates to a composition for the volumetric generation of radiation. The composition comprises a porous substrate loaded with a component capable of emitting radiation upon interaction with an exciting radiation. Preferably, the composition is an aerogel substrate loaded with a component, e.g., a phosphor, capable of interacting with exciting radiation of a first energy, e.g., ultraviolet light, to produce radiation of a second energy, e.g., visible light.

  13. Lighting the Way with Compact Fluorescent Lighting | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergyInterested Parties - WAPA PublicLED ADOPTIONtoLighting System Optimization:Lighting the

  14. A Frequency Analysis of Light Transport

    E-Print Network [OSTI]

    Durand, Frédo

    #12;A Frequency Analysis of Light Transport F. Durand, MIT CSAIL N. Holzschuch, C. Soler, ARTIS lighting onlyDirect lighting only #12;Frequency aspects of light transport · Blurriness = frequency content ­ From equations of light transport #12;Unified framework: · Spatial frequency (e.g. shadows, textures

  15. Beyond the Replacement Paradigm: Smart Lighting

    E-Print Network [OSTI]

    Salama, Khaled

    Hole? · DC device in an AC Powered World · Cool light source with thermal issues · High Efficacy ­ High Spectral Density Information Informationneeded to makethe Light SMART #12;10 Light Flow ­ InformationBeyond the Replacement Paradigm: Smart Lighting Robert F. Karlicek, Jr. Director, Smart Lighting

  16. Projection screen having reduced ambient light scattering

    DOE Patents [OSTI]

    Sweatt, William C. (Albuquerque, NM)

    2010-05-11

    An apparatus and method for improving the contrast between incident projected light and ambient light reflected from a projection screen are described. The efficiency of the projection screen for reflection of the projected light remains high, while permitting the projection screen to be utilized in a brightly lighted room. Light power requirements from the projection system utilized may be reduced.

  17. Light metal explosives and propellants

    DOE Patents [OSTI]

    Wood, Lowell L.; Ishikawa, Muriel Y.; Nuckolls, John H.; Pagoria, Phillip F.; Viecelli, James A.

    2005-04-05

    Disclosed herein are light metal explosives, pyrotechnics and propellants (LME&Ps) comprising a light metal component such as Li, B, Be or their hydrides or intermetallic compounds and alloys containing them and an oxidizer component containing a classic explosive, such as CL-20, or a non-explosive oxidizer, such as lithium perchlorate, or combinations thereof. LME&P formulations may have light metal particles and oxidizer particles ranging in size from 0.01 .mu.m to 1000 .mu.m.

  18. FALL 2015 Wednesday limited service schedule for move-in only full service begins Monday, August 24

    E-Print Network [OSTI]

    · Old Navy 307 Walmart serving Walmart and select off-campus apartments no service no service no service at Hardee Village Walmart (4600 E 10th Street) · 10th & University Manor · 10th & 33 East SafeRide point

  19. Tips: Lighting | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    are available as flood lights. These models have been tested to withstand the rain and snow so they can be used in exposed fixtures. Look for ENERGY STAR-qualified fixtures that...

  20. Next Generation Light Source Workshops

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Next Generation Light Source Workshops A series of workshops will be held in late August with the goal of refining the scientific drivers for the facility and translating the...

  1. Columbia Water & Light- Solar Rebates

    Broader source: Energy.gov [DOE]

    Columbia Water & Light electric customers are eligible for a $400 rebate for the purchase of a new solar water heater. To apply for this rebate, a customer submits a pre-approval application to...

  2. Series cell light extinction monitor

    DOE Patents [OSTI]

    Novick, Vincent J. (Downers Grove, IL)

    1990-01-01

    A method and apparatus for using the light extinction measurements from two or more light cells positioned along a gasflow chamber in which the gas volumetric rate is known to determine particle number concentration and mass concentration of an aerosol independent of extinction coefficient and to determine estimates for particle size and mass concentrations. The invention is independent of particle size. This invention has application to measurements made during a severe nuclear reactor fuel damage test.

  3. Controls for Solid-State Lighting

    E-Print Network [OSTI]

    Rubinstein, Francis

    2007-01-01

    the promising hybrid LED lighting systems are: 1. LED Hybridexample of a hybrid LED lighting system, is a system fieldedwhich switches to low-level LED lighting after the occupancy

  4. Embodied Energy and Off-Grid Lighting

    E-Print Network [OSTI]

    Alstone, Peter

    2012-01-01

    Self-reported Impacts of LED Lighting Technology Comparedto Fuel-based Lighting on Night Market Business Prosperity28, no. 4, pp. 533-546. Lighting Africa (prepared by Dalberg

  5. EECBG Success Story: Lighting Retrofit Improving Visibility,...

    Broader source: Energy.gov (indexed) [DOE]

    New LED lighting fixtures (right) emit a whiter light than existing high-pressure sodium cobra head streetlights (left) and don't spill light onto nearby houses. | Photos courtesy...

  6. Outdoor Solar Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Outdoor Solar Lighting Outdoor Solar Lighting July 29, 2012 - 6:34pm Addthis Outdoor solar lights use solar cells, which convert sunlight into electricity, and are easy to install...

  7. Toward ZnO Light Emitting Diode

    E-Print Network [OSTI]

    Liu, Jianlin

    2008-01-01

    applications such as light emitting diodes (LEDs) and laser009 "Toward ZnO Light Emitting Diode" Jianlin Liu July 2008Title: “Toward ZnO Light Emitting Diode” Sponsor: UC Energy

  8. Novel phosphors for solid state lighting

    E-Print Network [OSTI]

    Furman, Joshua D

    2010-11-16

    Solid state white light emitting diode lighting devices outperform conventional light sources in terms of lifetime, durability, and lumens per watt. However, the capital contribution is still to high to encourage widespread adoption. Furthermore...

  9. Cost-effective Lighting Retrofits: Lessons Learned 

    E-Print Network [OSTI]

    Fisher, M. D.

    1994-01-01

    -effective Lighting Retrofits: Lessons Learned Mark D. Fisher Certified Lighting Efficiency Professional Johnson Controls Dallas, Texas ABSTRACT Facility managers and energy engineers contemplating a lighting retrofit are confronted with a confusing array...

  10. LIGHT SCATTERING STUDIES OF SILICA AEROGELS

    E-Print Network [OSTI]

    Hunt, A.J.

    2010-01-01

    van de Hulst, H.C. , Light Scattering by Small Particles,A New Polarization-Modulated Light Scattering Instrument,"and interpretation of light scattering effects in aerogels.

  11. Advanced Light Source Activity Report 2005

    E-Print Network [OSTI]

    Tamura Ed., Lori S.

    2010-01-01

    upgrade on the Advanced Light Source," Nucl. Instrum. Meth.n photoemission at the Advanced Light Source," Radiât. Phys.high-pressure studies at the Advanced Light Source w i t h a

  12. Electrodeposited Light-Emitting Nanojunctions Wendong Xing,

    E-Print Network [OSTI]

    Potma, Eric Olaf

    Electrodeposited Light-Emitting Nanojunctions Wendong Xing, Wenbo Yan, Talin Ayvazian, Yong Wang-CdSe. Light-emitting nanojunctions (LEnJs) prepared at both temperatures show a low threshold voltage for light emission of

  13. Luminous Efficacy Standards for General Purpose Lights

    Broader source: Energy.gov [DOE]

    *Efficacy refers to the overall energy efficiency of light and is measured in lumens (measure of light output) per watt (measure of power input). The efficacy of a typical incandescent light bulb...

  14. Lumental : web-based tunable lighting control

    E-Print Network [OSTI]

    Hall, Harrison King

    2012-01-01

    Dynamically adjusting the light spectrum of spectrum-tunable light fixtures promises significant energy savings over binary or incremental dimming control. To enable this level of controllability, lighting must evolve from ...

  15. Development of a light force accelerometer

    E-Print Network [OSTI]

    Butts, David LaGrange

    2008-01-01

    In this work, the feasibility of a light force accelerometer was experimentally demonstrated. The light force accelerometer is an optical inertial sensor which uses focused laser light to levitate and trap glass microspheres ...

  16. Development of a FiberDevelopment of a Fiber Continuity and LightContinuity and Light

    E-Print Network [OSTI]

    Minnesota, University of

    Development of a FiberDevelopment of a Fiber Continuity and LightContinuity and Light Calibration of light is collected by a WLS fiber;The flash of light is collected by a WLS fiber; the core contains a dye that shifts the bluethe core contains a dye that shifts the blue light wavelength to green.light

  17. Characterization of light gluten and light steep water from a corn wet milling plant

    E-Print Network [OSTI]

    Characterization of light gluten and light steep water from a corn wet milling plant K.D. Rausch. There are few data on the effect of composition of the parent process streams, light steep water (LSW) and light value of CGF and CGM. CGF and CGM are formed from two process streams, light steep water (LSW) and light

  18. Lighting Market Study: Illuminating the Northwest Efficiency

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lighting Market Study: Illuminating the Northwest Efficiency Community Summer 2014 through Winter 2015 Research Manager: Carrie Cobb, clcobb@bpa.gov, 503-230-4985 The lighting...

  19. New Laser's "First Light" Shatters Record | Jefferson...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Accelerator Facility have delivered first light from their Free Electron Laser (FEL). Only 2 years after ground was broken for the FEL, infrared light of more than...

  20. Innovative Office Lighting System with Integrated Spectrally...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    an innovative LED office lighting system solution that integrates light delivery, optics, and controls for energy efficiency and occupant health and well-being. The office...

  1. OTEC- Commercial Lighting Retrofit Rebate Program

    Broader source: Energy.gov [DOE]

    The Oregon Trail Electric Consumers Cooperative (OTEC) offers a commercial lighting retrofit program that provides rebates for commercial businesses that change existing lighting to more energy...

  2. Chapter 5: Lighting, HVAC, and Plumbing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    : Lighting, HVAC, and Plumbing High-Performance Engineering Design Lighting System Design Mechanical System Design Central Plant Systems Plumbing and Water Use Building Control...

  3. Types of Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    selection. Types of lighting include: Fluorescent Incandescent Outdoor solar Light-emitting diode (LED) Also learn how energy-efficient lightbulbs compare to traditional...

  4. Commercial Building Energy Alliance Exterior Lighting Scoping...

    Office of Scientific and Technical Information (OSTI)

    Commercial Building Energy Alliance Exterior Lighting Scoping Study Citation Details In-Document Search Title: Commercial Building Energy Alliance Exterior Lighting Scoping Study...

  5. Ecological Consequences of Artificial Night Lighting

    E-Print Network [OSTI]

    Piselli, Kathy

    2006-01-01

    s editors, the idea that light pollution might pose a broadpublic opinion against light pollution. But consider thatlight in the night sky in national parks, finding pollution

  6. Outdoor Area Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for outdoor areas. Outdoor Area Lighting (June 2008) More Documents & Publications Philadelphia International Airport Apron Lighting: LED System Performance in a Trial...

  7. Philadelphia International Airport Apron Lighting: LED System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Philadelphia International Airport Apron Lighting: LED System Performance in a Trial Installation Philadelphia International Airport Apron Lighting: LED System Performance in a...

  8. Municipal Consortium LED Street Lighting Workshop Presentations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Controls Norma Isahakian, City of Los Angeles Bureau of Street Lighting San Jose's "Smart" LED Streetlights: Controlled Amy Olay, City of San Jose Adaptive Lighting Controls...

  9. Poudre Valley REA- Commercial Lighting Rebate Program

    Broader source: Energy.gov [DOE]

    Poudre Valley Rural Electric Association (PVREA), a Touchstone Energy Cooperative, offers a variety of lighting rebates to commercial customers. Rebates are available on commercial lighting...

  10. 1999 Commercial Buildings Characteristics--Glossary--Lighting...

    U.S. Energy Information Administration (EIA) Indexed Site

    produces light by passing electricity through mercury vapor, causing the fluorescent coating to glow, or fluoresce. Excluded are compact fluorescent light bulbs, which are listed...

  11. SciTech Connect: "light emitting diode"

    Office of Scientific and Technical Information (OSTI)

    light emitting diode" Find + Advanced Search Term Search Semantic Search Advanced Search All Fields: "light emitting diode" Semantic Semantic Term Title: Full Text:...

  12. Connected Lighting Systems Workshop Agenda | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Connected Lighting Systems Workshop Agenda Connected Lighting Systems Workshop Agenda Connected Lighting Systems Workshop Agenda 072415.pdf...

  13. Healthcare Energy: Spotlight on Lighting and Other Electric Loads...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lighting and Other Electric Loads Healthcare Energy: Spotlight on Lighting and Other Electric Loads Compact fluorescent, light-emitting diode, and energy-saving incandescent light...

  14. Information for Retailers of Lighting Products | Department of...

    Energy Savers [EERE]

    Retailers of Lighting Products Information for Retailers of Lighting Products Information for Retailers of Lighting Products U.S. retailers who sell lighting products can use the...

  15. New Lighting Standards Began in 2012 | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Electricity & Fuel Lighting New Lighting Standards Began in 2012 New Lighting Standards Began in 2012 New Lighting Standards Began in 2012 Common lightbulbs now sold in the...

  16. Demonstration Assessment of Light Emitting Diode (LED) Street...

    Energy Savers [EERE]

    Demonstration Assessment of Light Emitting Diode (LED) Street Lighting, Final Report Demonstration Assessment of Light Emitting Diode (LED) Street Lighting, Final Report This...

  17. DOE Street Lighting Consortium Releases Results of Public Street...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Street Lighting Consortium Releases Results of Public Street and Area Lighting Inventory Survey DOE Street Lighting Consortium Releases Results of Public Street and Area Lighting...

  18. Demonstration Assessment of Light-Emitting Diode (LED) Freezer...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Demonstration Assessment of Light-Emitting Diode (LED) Freezer Case Lighting Demonstration Assessment of Light-Emitting Diode (LED) Freezer Case Lighting This document is a report...

  19. Relic abundance of light photinos

    SciTech Connect (OSTI)

    Chung, D.J. [Department of Physics and Enrico Fermi Institute, The University of Chicago, Chicago, Illinois 60637 (United States)] [Department of Physics and Enrico Fermi Institute, The University of Chicago, Chicago, Illinois 60637 (United States); [NASA/Fermilab Astrophysics Center, Fermi National Accelerator Laboratory, Batavia, Illinois 60510 (United States); Farrar, G.R. [Department of Physics and Astronomy, Rutgers University, Piscataway, New Jersey 08855 (United States)] [Department of Physics and Astronomy, Rutgers University, Piscataway, New Jersey 08855 (United States); Kolb, E.W. [NASA/Fermilab Astrophysics Center, Fermi National Accelerator Laboratory, Batavia, Illinois 60510 (United States)] [NASA/Fermilab Astrophysics Center, Fermi National Accelerator Laboratory, Batavia, Illinois 60510 (United States); [Department of Astronomy and Astrophysics and Enrico Fermi Institute, The University of Chicago, Chicago, Illinois 60637 (United States)

    1997-11-01

    We solve the coupled Boltzmann equation for the system of light photinos interacting with pions and R{sup 0}{close_quote}s (the gluon-gluino bound state) to determine the relic abundance of light photinos in the light gaugino scenario. Cosmology bounds the ratio r of the R{sup 0} mass to the {tilde {gamma}} mass to be less than about 1.8. We also use a model Lagrangian embodying crossing symmetry between the R{sup 0}{leftrightarrow}{tilde {gamma}}{pi}{pi} and R{sup 0}{pi}{leftrightarrow}{tilde {gamma}}{pi} reactions to identify cosmologically favored regions of R{sup 0} lifetime as a function of R{sup 0} and {tilde {gamma}} masses. {copyright} {ital 1997} {ital The American Physical Society}

  20. Enrichment of light hydrocarbon mixture

    DOE Patents [OSTI]

    Yang, Dali (Los Alamos, NM); Devlin, David (Santa Fe, NM); Barbero, Robert S. (Santa Cruz, NM); Carrera, Martin E. (Naperville, IL); Colling, Craig W. (Warrenville, IL)

    2011-11-29

    Light hydrocarbon enrichment is accomplished using a vertically oriented distillation column having a plurality of vertically oriented, nonselective micro/mesoporous hollow fibers. Vapor having, for example, both propylene and propane is sent upward through the distillation column in between the hollow fibers. Vapor exits neat the top of the column and is condensed to form a liquid phase that is directed back downward through the lumen of the hollow fibers. As vapor continues to ascend and liquid continues to countercurrently descend, the liquid at the bottom of the column becomes enriched in a higher boiling point, light hydrocarbon (propane, for example) and the vapor at the top becomes enriched in a lower boiling point light hydrocarbon (propylene, for example). The hollow fiber becomes wetted with liquid during the process.

  1. Enrichment of light hydrocarbon mixture

    DOE Patents [OSTI]

    Yang; Dali (Los Alamos, NM); Devlin, David (Santa Fe, NM); Barbero, Robert S. (Santa Cruz, NM); Carrera, Martin E. (Naperville, IL); Colling, Craig W. (Warrenville, IL)

    2010-08-10

    Light hydrocarbon enrichment is accomplished using a vertically oriented distillation column having a plurality of vertically oriented, nonselective micro/mesoporous hollow fibers. Vapor having, for example, both propylene and propane is sent upward through the distillation column in between the hollow fibers. Vapor exits neat the top of the column and is condensed to form a liquid phase that is directed back downward through the lumen of the hollow fibers. As vapor continues to ascend and liquid continues to countercurrently descend, the liquid at the bottom of the column becomes enriched in a higher boiling point, light hydrocarbon (propane, for example) and the vapor at the top becomes enriched in a lower boiling point light hydrocarbon (propylene, for example). The hollow fiber becomes wetted with liquid during the process.

  2. Foundations and Light Compass Foundations and Light Compass

    E-Print Network [OSTI]

    Wong, Jennifer L.

    Models and Abstractions ­­ Problem FormulationProblem Formulation ­­ Sensor FusionSensor Fusion ­­ Design, greenhousesmuseums, greenhouses ­­ Energy ConservationEnergy Conservation Dimming of light in unnecessary areas the data?How to interpret the data? Sensor FusionSensor Fusion ­­ Where should they be placed?Where should

  3. Light and Color in Nature -Scattering Effects -

    E-Print Network [OSTI]

    Assarsson, Ulf

    1 Seminar WS 2003/04 Light and Color in Nature - Scattering Effects - Marcus Magnor WS03/04: Light and Color in Nature ­ Scattering Overview · Last Lecture ­ Interference · Today ­ Light scattering: water rendering #12;2 WS03/04: Light and Color in Nature ­ Scattering List of Topics · Rainbow ­ Stephan

  4. Light-Induced Atomic Desorption (LIAD)

    E-Print Network [OSTI]

    Budker, Dmitry

    in density n0=the initial density more intense higher density!! #12;Light Friquency Low light power (0.56m, polysiloxane, etc) #12;Time Dependence exposed to 514-nm desorbing light at room temperature (~20) density increase in density!! coating is replenished #12;Light Intensity 0=relative rate of increase of the vapor

  5. Organic electroluminescent devices having improved light extraction

    DOE Patents [OSTI]

    Shiang, Joseph John (Niskayuna, NY)

    2007-07-17

    Organic electroluminescent devices having improved light extraction include a light-scattering medium disposed adjacent thereto. The light-scattering medium has a light scattering anisotropy parameter g in the range from greater than zero to about 0.99, and a scatterance parameter S less than about 0.22 or greater than about 3.

  6. Identifying Lights with their Switches Jayadev Misra

    E-Print Network [OSTI]

    Misra, Jayadev

    Identifying Lights with their Switches Jayadev Misra 09/07/2012 Problem Description Given are N switches and N lights where each switch controls exactly one light and each light is controlled by exactly one switch. The wiring diagram is unavailable and the wiring itself is hidden. A step consists

  7. Nonimaging light concentrator with uniform irradiance

    DOE Patents [OSTI]

    Winston, Roland (Chicago, IL); Gee, Randy C. (Arvada, CO)

    2003-04-01

    A nonimaging light concentrator system including a primary collector of light, an optical mixer disposed near the focal zone for collecting light from the primary collector, the optical mixer having a transparent entrance aperture, an internally reflective housing for substantially total internal reflection of light, a transparent exit aperture and an array of photovoltaic cells disposed near the transparent exit aperture.

  8. Today LED Holiday Lights, Tomorrow the World?

    SciTech Connect (OSTI)

    Gordon, Kelly L.

    2004-12-20

    This article for The APEM Advantage, the quarterly newsletter of the Association of Professional Energy Managers (APEM) describes the recent increase in the popularity of light emitting diode (LED) lighting and compares LED light output with that of incandescent and compact fluorescent lighting.

  9. Intelligent Traffic Light Control Marco Wiering

    E-Print Network [OSTI]

    Utrecht, Universiteit

    an adaptive optimization al- gorithm based on reinforcement learning. We have implemented a traffic light different traffic light controllers. Experimental results indicate that our adaptive traffic lightIntelligent Traffic Light Control Marco Wiering Jelle van Veenen Jilles Vreeken Arne Koopman

  10. Adaptive Representation of Specular Light Flux

    E-Print Network [OSTI]

    Montréal, Université de

    Adaptive Representation of Specular Light Flux Normand Bri`ere Pierre Poulin D´epartement d in all but the simplest con- figurations. To capture their appearance, we present an adaptive approach based upon light beams. The coher- ence between light rays forming a light beam greatly re- duces

  11. Light Induced Guard Cell Sunando Roy

    E-Print Network [OSTI]

    Albert, Réka

    Light Induced Guard Cell Signaling Sunando Roy #12;Guard cells and the stomata The tradeoff between water and carbon dioxide Roelfsema et. al. New Phytologist (2005) 167: 665 - 691 #12;The Light Signaling features · The blue light signaling carried out through ion channels · The red light signaling occurs

  12. National Synchrotron Light Source Activity Report 1998

    SciTech Connect (OSTI)

    Rothman, Eva

    1999-05-01

    National Synchrotron Light Source Activity Report for period October 1, 1997 through September 30, 1998

  13. Freezing Light via hot gases

    E-Print Network [OSTI]

    Olga Kocharovskaya; Yuri Rostovtsev; Marlan O. Scully

    2000-10-09

    We prove that it is possible to freeze a light pulse (i.e., to bring it to a full stop) or even to make its group velocity negative in a coherently driven Doppler broadened atomic medium via electromagnetically induced transparency (EIT). This remarkable phenomenon of the ultra-slow EIT polariton is based on the spatial dispersion of the refraction index $n(\\w,k)$, i.e., its wavenumber dependence, which is due to atomic motion and provides a negative contribution to the group velocity. This is related to, but qualitatively different from, the recently observed light slowing caused by large temporal (frequency) dispersion.

  14. Restoring Detroit's Street Lighting System

    SciTech Connect (OSTI)

    Kinzey, Bruce R.

    2015-10-21

    The City of Detroit is undertaking a comprehensive restoration of its street lighting system that includes transitioning the existing high-pressure sodium (HPS) sources to light-emitting diode (LED). Detroit’s well-publicized financial troubles over the last several years have added many hurdles and constraints to this process. Strategies to overcome these issues have largely been successful, but have also brought some mixed results. This document provides an objective review of the circumstances surrounding the system restoration, the processes undertaken and decisions made, and the results so far.

  15. Damage tolerant light absorbing material

    DOE Patents [OSTI]

    Lauf, R.J.; Hamby, C. Jr.; Akerman, M.A.; Seals, R.D.

    1993-09-07

    A light absorbing article comprised of a composite of carbon-bonded carbon fibers, is prepared by: blending carbon fibers with a carbonizable organic powder to form a mixture; dispersing the mixture into an aqueous slurry; vacuum molding the aqueous slurry to form a green article; drying and curing the green article to form a cured article; and, carbonizing the cured article at a temperature of at least about 1000 C to form a carbon-bonded carbon fiber light absorbing composite article having a bulk density less than 1 g/cm[sup 3]. 9 figures.

  16. Damage tolerant light absorbing material

    DOE Patents [OSTI]

    Lauf, Robert J. (Oak Ridge, TN); Hamby, Jr., Clyde (Harriman, TN); Akerman, M. Alfred (Knoxville, TN); Seals, Roland D. (Oak Ridge, TN)

    1993-01-01

    A light absorbing article comprised of a composite of carbon-bonded carbon fibers, prepared by: blending carbon fibers with a carbonizable organic powder to form a mixture; dispersing the mixture into an aqueous slurry; vacuum molding the aqueous slurry to form a green article; drying and curing the green article to form a cured article; and, carbonizing the cured article at a temperature of at least about 1000.degree. C. to form a carbon-bonded carbon fiber light absorbing composite article having a bulk density less than 1 g/cm.sup.3.

  17. Solid state electrochromic light modulator

    DOE Patents [OSTI]

    Cogan, S.F.; Rauh, R.D.

    1990-07-03

    An all solid-state variable transmission electrochromic device has a source of charge compensating ions. An inorganic oxide counter electrode film which on reduction with the accompanying insertion of the charge compensating ions increases its transmission of light of predetermined wavelength is separated from a primary electrochromic film which on reduction with the accompanying insertion of the charge compensating ions decreases its transmission of light of predetermined wavelength by an insulating electrolyte film that transports the charge compensating ions. First and second electrodes are contiguous with the inorganic oxide counter electrode film and the primary electrochromic film, respectively, and separated by the three films. 4 figs.

  18. Shedding Light on Nanocrystal Defects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effect Photovoltaics -7541 Unlimited Release4:SeymourShedding Light onShedding Light

  19. Illuminating system and method for specialized and decorative lighting using liquid light guides

    DOE Patents [OSTI]

    Zorn, Carl J. (Yorktown, VA); Kross, Brian J. (Yorktown, VA); Majewski, Stanislaw (Grafton, VA); Wojcik, Randolph F. (Yorktown, VA)

    1998-01-01

    The present invention comprises an illumination system for specialized decorative lighting including a light source, a flexible plastic tube sheath for distributing the light to a remote location, a transparent liquid core filling the tube that has an index of refraction greater than that of the plastic tube and an arrangement where light coupled from the light source is caused to leak from the liquid light guide at desired locations for the purposes of specialized lighting, such as underwater illumination in swimming pools.

  20. Strategy Guideline: High Performance Residential Lighting

    SciTech Connect (OSTI)

    Holton, J.

    2012-02-01

    The Strategy Guideline: High Performance Residential Lighting has been developed to provide a tool for the understanding and application of high performance lighting in the home. The high performance lighting strategies featured in this guide are drawn from recent advances in commercial lighting for application to typical spaces found in residential buildings. This guide offers strategies to greatly reduce lighting energy use through the application of high quality fluorescent and light emitting diode (LED) technologies. It is important to note that these strategies not only save energy in the home but also serve to satisfy the homeowner's expectations for high quality lighting.

  1. New Lighting Technologies Demonstrated at Defense Commissaries

    SciTech Connect (OSTI)

    Parker, Steven A.; Konrade, Joseph; Shepherd III, E Carroll

    2008-10-02

    New and emerging lighting technologies, such as LEDs, can improve lighting quality while reducing maintenance and energy costs. The Defense Commissary Agency, with support from the Department of Energy's Federal Energy Management Program and the Pacific Northwest National Laboratory, demonstrsted the use of LED lighting in a large freezer storage room and fiber optic lighting in a series of verticial reach-in display freezer cases at the Fort George G. Meade Commissary. The LEDs resulted in an 85% reduction in lighting energy and a reduction in maintenance requirements. The fiber optic lighting system resulted in a 56% reduction in lighting energy.

  2. New Lighting Technologies Demonstrated at Defense Commissaries

    SciTech Connect (OSTI)

    Parker, Steven; Konrade, Joseph; Shepherd III, E Carroll

    2009-01-31

    New and emerging lighting technologies, such as LEDs, can improve lighting quality while reducing maintenance and energy costs. The Defense Commissary Agency, with support from the Department of Energy's Federal Energy Management Program and the Pacific Northwest National Laboratory, demonstrsted the use of LED lighting in a large freezer storage room and fiber optic lighting in a series of verticial reach-in display freezer cases at the Fort George G. Meade Commissary. The LEDs resulted in an 85% reduction in lighting energy and a reduction in maintenance requirements. The fiber optic lighting system resulted in a 56% reduction in lighting energy.

  3. Interplay between out-of-plane anisotropic L1{sub 1}-type CoPt and in-plane anisotropic NiFe layers in CoPt/NiFe exchange springs

    SciTech Connect (OSTI)

    Saravanan, P.; Hsu, Jen-Hwa Tsai, C. L.; Tsai, C. Y.; Lin, Y. H.; Kuo, C. Y.; Wu, J.-C.; Lee, C.-M.

    2014-06-28

    Films of L1{sub 1}-type CoPt/NiFe exchange springs were grown with different NiFe (Permalloy) layer thickness (t{sub NiFe}?=?0–10?nm). X-ray diffraction analysis reveals that the characteristic peak position of NiFe(111) is not affected by the CoPt-layer—confirming the absence of any inter-diffusion between the CoPt and NiFe layers. Magnetic studies indicate that the magnetization orientation of NiFe layer can be tuned through varying t{sub NiFe} and the perpendicular magnetic anisotropy of L1{sub 1}-type CoPt/NiFe films cannot sustain for t{sub NiFe} larger than 3.0?nm due to the existence of exchange interaction at the interface of L1{sub 1}-CoPt and NiFe layers. Magnetic force microscopy analysis on the as-grown samples shows the changes in morphology from maze-like domains with good contrast to hazy domains when t{sub NiFe}???3.0?nm. The three-dimensional micro-magnetic simulation results demonstrate that the magnetization orientation in NiFe layer is not uniform, which continuously increases from the interface to the top of NiFe layer. Furthermore, the tilt angle of the topmost NiFe layers can be changed over a very wide range from a small number to about 75° by varying t{sub NiFe} from 1 to 10?nm. It is worth noting that there is an abrupt change in the magnetization direction at the interface, for all the t{sub NiFe} investigated. The results of present study demonstrate that the tunable tilted exchange springs can be realized with L1{sub 1}-type CoPt/NiFe bilayers for future applications in three-axis magnetic sensors or advanced spintronic devices demanding inclined magnetic anisotropy.

  4. Metacapacitors for LED Lighting: Metacapacitors

    SciTech Connect (OSTI)

    None

    2010-09-02

    ADEPT Project: The CUNY Energy Institute is developing less expensive, more efficient, smaller, and longer-lasting power converters for energy-efficient LED lights. LEDs produce light more efficiently than incandescent lights and last significantly longer than compact fluorescent bulbs, but they require more sophisticated power converter technology, which increases their cost. LEDs need more sophisticated converters because they require a different type of power (low voltage direct current, or DC) than what's generally supplied by power outlets. The CUNY Energy Institute is developing sophisticated power converters for LEDs that contain capacitors made from new, nanoscale materials. Capacitors are electrical components that are used to store energy. CUNY's unique capacitors are configured with advanced power circuits to more efficiently control and convert power to the LED lighting source. They also eliminate the need for large magnetic components, instead relying on networks of capacitors that can be easily printed on plastic substrate. CUNY's prototype LED power converter already meets DOE's 2020 projections for the energy efficiency of LED power converters.

  5. High Performance Outdoor Lighting Accelerator

    Broader source: Energy.gov [DOE]

    Hosted by the U.S. Department of Energy (DOE)’s Weatherization and Intergovernmental Programs Office (WIPO), this webinar covered the expansion of the Better Buildings platform to include the newest initiative for the public sector: the High Performance Outdoor Lighting Accelerator (HPOLA).

  6. Advanced Light Source QUICK FACTS

    E-Print Network [OSTI]

    : Electrons with a nominal energy of 1.9 GeV ~0.20 mm × 0.02 mm (about the width of a human hair) Electrons and x-ray light that is directed down beamlines to experiment endstations. Size of Electron Beam: 35 around the storage ring, the electrons emit synchrotron radiation--energy in the form of photons

  7. The light meson spectroscopy program

    SciTech Connect (OSTI)

    Smith, Elton S.

    2014-06-01

    Recent discoveries of a number of unexpected new charmomium-like meson states at the BaBar and Belle B-factories have demonstrated how little is still known about meson spectroscopy. In this talk we will review recent highlights of the light quark spectroscopy from collider and fixed target experiments.

  8. National Synchrotron Light Source II

    ScienceCinema (OSTI)

    Steve Dierker

    2010-01-08

    The National Synchrotron Light Source II (NSLS-II) at the U.S. Department of Energy's Brookhaven National Laboratory is a proposed new state-of-the-art medium energy storage ring designed to deliver world-leading brightness and flux with top-off operation

  9. Light is said to be reflected when the angle at which light

    E-Print Network [OSTI]

    Gilbes, Fernando

    1 #12;2 Light is said to be reflected when the angle at which light initially strikes a surface is equal to the angle at which light bounces off the same surface. In the diagram, light strikes a surface", this is an example of reflected light. Refraction is the bending of a wave when it enters a medium where it's speed

  10. Experiential Lighting Development and Validation of Perception-based Lighting Controls

    E-Print Network [OSTI]

    Experiential Lighting Development and Validation of Perception-based Lighting Controls BY MATTHEW Lighting Development and Validation of Perception-based Lighting Controls by Matthew Aldrich Submitted Lighting, and its emergence as a digital and networked medium, represents an ideal platform for conducting

  11. CSC418 / CSCD18 / CSC2504 Basic Lighting and Reflection 8 Basic Lighting and Reflection

    E-Print Network [OSTI]

    Toronto, University of

    CSC418 / CSCD18 / CSC2504 Basic Lighting and Reflection 8 Basic Lighting and Reflection Up things, on the lighting that illuminates the scene, and on the interaction of light with the objects in the scene. Some of the basic qualitative properties of lighting and object reflectance that we need

  12. Light Collages: Lighting Design for Effective Visualization Chang Ha Lee Xuejun Hao Amitabh Varshney

    E-Print Network [OSTI]

    Varshney, Amitabh

    Light Collages: Lighting Design for Effective Visualization Chang Ha Lee Xuejun Hao Amitabh 20742 {chlee, hao, varshney}@cs.umd.edu ABSTRACT We introduce Light Collages ­ a lighting design system perception of features with lighting that is locally consistent and globally inconsistent. Inspired

  13. Enhanced coupling of light from organic light emitting diodes using nanoporous films

    E-Print Network [OSTI]

    Enhanced coupling of light from organic light emitting diodes using nanoporous films H. J. Peng, Y the light extraction efficiency for organic light emitting diode OLED . Nanoporous alumina film was used by Bragg scattering. The corrugated light- emitting diode had two-times the efficiency as compared

  14. Nature ofNature of Light is a self-propagatingLight is a self-propagating

    E-Print Network [OSTI]

    Shirley, Yancy

    within 10% ! Ole Christensen Rømer #12;Aberration of LightAberration of Light James Bradley DeterminedTheThe Nature ofNature of LightLight #12;Light is a self-propagatingLight is a selfWavelength & Frequency = c #12;Speed of lightSpeed of light Timing the occultations of Io from Earth in 1676 : got

  15. Light extraction enhanced white light-emitting diodes with multi-layered phosphor configuration

    E-Print Network [OSTI]

    You, Jiun Pyng; Tran, Nguyen T.; Shi, Frank G.

    2010-01-01

    for general white LED lighting. ©2010 Optical Society offor general white LED lighting. #122987 - $15.00 USD (C)state lighting: Failure analysis of white LEDs,” J. Cryst.

  16. Monitored lighting energy savings from dimmable lighting controls in The New York Times Headquarters Building

    E-Print Network [OSTI]

    Fernandes, Luis L.

    2014-01-01

    A. , D’Herdt, P. , 2008, Lighting energy savings in officesLux Europa, 11 th European Lighting Conference, Istanbul,evaluation of the dimmable lighting, automated shading, and

  17. Light extraction enhanced white light-emitting diodes with multi-layered phosphor configuration

    E-Print Network [OSTI]

    You, Jiun Pyng; Tran, Nguyen T.; Shi, Frank G.

    2010-01-01

    and J. K. Kim, “Solid-state light sources getting smart,”power phosphor-converted light-emitting diodes based on III-for phosphor- based white-light-emitting diodes,” Appl.

  18. Light at Night - The Latest Science

    SciTech Connect (OSTI)

    Tuenge, Jason R.

    2010-10-04

    Discussions about possible health implications of exposure to light at night run the gamut, but given the available research, should any changes be made to currently recommended lighting practices? A panel of leading experts was assembled to explore what today's science can tell us about light at night. While it remains unproven that typical exposures to outdoor lighting have negative health impacts, this cannot be ruled out without more data and a standard metric for quantifying the relevant light exposures. LED technology holds tremendous potential for energy savings, but it is not yet clear whether its spectral characteristics will offer advantages over other light sources in terms of vision and circadian entrainment.

  19. Lighting system with thermal management system

    DOE Patents [OSTI]

    Arik, Mehmet; Weaver, Stanton; Stecher, Thomas; Seeley, Charles; Kuenzler, Glenn; Wolfe, Jr., Charles; Utturkar, Yogen; Sharma, Rajdeep; Prabhakaran, Satish; Icoz, Tunc

    2013-05-07

    Lighting systems having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system is configured to provide an air flow, such as a unidirectional air flow, through the housing structure in order to cool the light source. The driver electronics are configured to provide power to each of the light source and the thermal management system.

  20. Variable area light reflecting assembly

    DOE Patents [OSTI]

    Howard, T.C.

    1986-12-23

    Device is described for tracking daylight and projecting it into a building. The device tracks the sun and automatically adjusts both the orientation and area of the reflecting surface. The device may be mounted in either a wall or roof of a building. Additionally, multiple devices may be employed in a light shaft in a building, providing daylight to several different floors. The preferred embodiment employs a thin reflective film as the reflecting device. One edge of the reflective film is fixed, and the opposite end is attached to a spring-loaded take-up roller. As the sun moves across the sky, the take-up roller automatically adjusts the angle and surface area of the film. Additionally, louvers may be mounted at the light entrance to the device to reflect incoming daylight in an angle perpendicular to the device to provide maximum reflective capability when daylight enters the device at non-perpendicular angles. 9 figs.

  1. Light-driven phase shifter

    DOE Patents [OSTI]

    Early, James W. (Los Alamos, NM)

    1990-01-01

    A light-driven phase shifter is provided for modulating a transmission light beam. A gaseous medium such as argon is provided with electron energy states excited to populate a metastable state. A tunable dye laser is selected with a wavelength effective to deplete the metastable electron state and may be intensity modulated. The dye laser is directed through the gaseous medium to define a first optical path having an index of refraction determined by the gaseous medium having a depleted metastable electron state. A transmission laser beam is also directed through the gaseous medium to define a second optical path at least partially coincident with the first optical path. The intensity of the dye laser beam may then be varied to phase modulate the transmission laser beam.

  2. Variable area light reflecting assembly

    DOE Patents [OSTI]

    Howard, Thomas C. (Raleigh, NC)

    1986-01-01

    Device for tracking daylight and projecting it into a building. The device tracks the sun and automatically adjusts both the orientation and area of the reflecting surface. The device may be mounted in either a wall or roof of a building. Additionally, multiple devices may be employed in a light shaft in a building, providing daylight to several different floors. The preferred embodiment employs a thin reflective film as the reflecting device. One edge of the reflective film is fixed, and the opposite end is attached to a spring-loaded take-up roller. As the sun moves across the sky, the take-up roller automatically adjusts the angle and surface area of the film. Additionally, louvers may be mounted at the light entrance to the device to reflect incoming daylight in an angle perpendicular to the device to provide maximum reflective capability when daylight enters the device at non-perpendicular angles.

  3. Electroweak reactions with light nuclei

    E-Print Network [OSTI]

    Sonia Bacca

    2010-06-01

    The investigation of light nuclei with ab-initio methods provides an optimal setting to probe our knowledge on nuclear forces, because the few-nucleon problem can be solved accurately. Nucleons interact not only in pairs but also via many-body forces. Theoretical efforts need to be taken towards the identification of nuclear observables sensitive to the less known many-nucleon forces. Electromagnetic reactions can potentially provide useful information on this. We present results on photo-absorption and electron scattering off light nuclei, emphasizing the role of three-body forces and the comparison with experimental data. On the other hand, reactions induced by weak probes, like neutrino interactions with nucleonic matter, are relevant to astrophysics and can be calculated with few-body techniques. In this case, since often no experiment is possible, ab-initio predictions provide valuable input for astrophysical simulations.

  4. Structure of unstable light nuclei

    E-Print Network [OSTI]

    D. J. Millener

    2001-03-03

    The structure of light nuclei out to the drip lines and beyond up to Z = 8 is interpreted in terms of the shell model. Special emphasis is given to the underlying supermultiplet symmetry of the p-shell nuclei which form cores for neutrons and protons added in sd-shell orbits. Detailed results are given on the wave functions, widths, and Coulomb energy shifts for a wide range of non-normal parity states in the p-shell.

  5. Light-trapping concentrator cells

    SciTech Connect (OSTI)

    Keavney, C.J.; Geoffroy, L.M.; Sanfacon, M.M.; Tobin, S.P. (Spire Corp., Bedford, MA (USA))

    1989-11-01

    The objective of this project was to develop a thin, light-trapping silicon concentrator solar cell using a new structure, the cross-grooved cell. A process was developed for fabricating V-grooves on both sides of thin silicon wafers, the grooves on one side being perpendicular to those on the other side. A novel way of minimizing flat spots at the tops of the V-grooves was discovered. We experimentally verified the theoretical light-trapping superiority of the cross-grooved structure. We also demonstrated a reduction in grid line obscuration for grid lines running parallel to the V-grooves due to light reflection into the cell. high short-circuit current densities were achieved for p-i-n concentrator cells with the cross-grooved structure, proving the concept. The best efficiencies achieved were 18% at concentration, compared to 20% for a conventional planar low-resistivity cell. Recombination in the full-area emitter was identified as the major intrinsic loss mechanism in these thin, high-resistivity bifacial cells. Recombination on the emitter limits Voc and fill factor, and also leads to a large sublinearity of short-circuit current with light intensity. Reduction of the junction area is a major recommendation for future work. In addition, there were persistent problems with ohmic contacts and maintaining high minority-carrier lifetime during processing. We believe that these problems can be solved, and that the cross-grooved cell is a viable approach to the limit-efficiency silicon solar cell. This report covers research conducted between March 1987 and July 1989. 22 refs., 40 figs., 24 tabs.

  6. Light shield for solar concentrators

    DOE Patents [OSTI]

    Plesniak, Adam P.; Martins, Guy L.

    2014-08-26

    A solar receiver unit including a housing defining a recess, a cell assembly received in the recess, the cell assembly including a solar cell, and a light shield received in the recess and including a body and at least two tabs, the body defining a window therein, the tabs extending outward from the body and being engaged with the recess, wherein the window is aligned with the solar cell.

  7. Porous light-emitting compositions

    DOE Patents [OSTI]

    Burrell, Anthony K. (Los Alamos, NM); McCleskey, Thomas Mark (Los Alamos, NM); Jia, Quanxi (Los Alamos, NM); Bauer, Eve (Los Alamos, NM); Mueller, Alexander H. (Los Alamos, NM)

    2012-04-17

    Light-emitting devices are prepared by coating a porous substrate using a polymer-assisted deposition process. Solutions of metal precursor and soluble polymers having binding properties for metal precursor were coated onto porous substrates. The coated substrates were heated at high temperatures under a suitable atmosphere. The result was a substrate with a conformal coating that did not substantially block the pores of the substrate.

  8. Outdoor Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuelsof EnergyApril 2014DepartmentCouncilOfficeBudget OurOutdoor Lighting Outdoor

  9. New Energy-Saving Fiber Optic Lighting System Lights Up Public Spaces

    Office of Energy Efficiency and Renewable Energy (EERE)

    Case study covering Energy Focus, Inc. and its lighting technology that delivers light comparable to conventional lamps while using significantly less energy per lumen.

  10. Switching of light with light using cold atoms inside a hollow optical fiber

    E-Print Network [OSTI]

    Bajcsy, Michal

    We demonstrate a fiber-optical switch that operates with a few hundred photons per switching pulse. The light-light interaction is mediated by laser-cooled

  11. Broadband light-emitting diode

    DOE Patents [OSTI]

    Fritz, I.J.; Klem, J.F.; Hafich, M.J.

    1998-07-14

    A broadband light-emitting diode is disclosed. The broadband light-emitting diode (LED) comprises a plurality of III-V compound semiconductor layers grown on a semiconductor substrate, with the semiconductor layers including a pair of cladding layers sandwiched about a strained-quantum-well active region having a plurality of different energy bandgaps for generating light in a wavelength range of about 1.3--2 {micro}m. In one embodiment of the present invention, the active region may comprise a first-grown quantum-well layer and a last-grown quantum-well layer that are oppositely strained; whereas in another embodiment of the invention, the active region is formed from a short-period superlattice structure (i.e. a pseudo alloy) comprising alternating thin layers of InGaAs and InGaAlAs. The use a short-period superlattice structure for the active region allows different layers within the active region to be simply and accurately grown by repetitively opening and closing one or more shutters in an MBE growth apparatus to repetitively switch between different growth states therein. The broadband LED may be formed as either a surface-emitting LED or as an edge-emitting LED for use in applications such as chemical sensing, fiber optic gyroscopes, wavelength-divisionmultiplexed (WDM) fiber-optic data links, and WDM fiber-optic sensor networks for automobiles and aircraft. 10 figs.

  12. Broadband light-emitting diode

    DOE Patents [OSTI]

    Fritz, Ian J. (Albuquerque, NM); Klem, John F. (Sandia Park, NM); Hafich, Michael J. (Albuquerque, NM)

    1998-01-01

    A broadband light-emitting diode. The broadband light-emitting diode (LED) comprises a plurality of III-V compound semiconductor layers grown on a semiconductor substrate, with the semiconductor layers including a pair of cladding layers sandwiched about a strained-quantum-well active region having a plurality of different energy bandgaps for generating light in a wavelength range of about 1.3-2 .mu.m. In one embodiment of the present invention, the active region may comprise a first-grown quantum-well layer and a last-grown quantum-well layer that are oppositely strained; whereas in another embodiment of the invention, the active region is formed from a short-period superlattice structure (i.e. a pseudo alloy) comprising alternating thin layers of InGaAs and InGaAlAs. The use a short-period superlattice structure for the active region allows different layers within the active region to be simply and accurately grown by repetitively opening and closing one or more shutters in an MBE growth apparatus to repetitively switch between different growth states therein. The broadband LED may be formed as either a surface-emitting LED or as an edge-emitting LED for use in applications such as chemical sensing, fiber optic gyroscopes, wavelength-division-multiplexed (WDM) fiber-optic data links, and WDM fiber-optic sensor networks for automobiles and aircraft.

  13. Materials for solid state lighting

    SciTech Connect (OSTI)

    Johnson, S.G.; Simmons, J.A.

    2002-03-26

    Dramatic improvement in the efficiency of inorganic and organic light emitting diodes (LEDs and OLEDs) within the last decade has made these devices viable future energy efficient replacements for current light sources. However, both technologies must overcome major technical barriers, requiring significant advances in material science, before this goal can be achieved. Attention will be given to each technology associated with the following major areas of material research: (1) material synthesis, (2) process development, (3) device and defect physics, and (4) packaging. The discussion on material synthesis will emphasize the need for further development of component materials, including substrates and electrodes, necessary for improving device performance. The process technology associated with the LEDs and OLEDs is very different, but in both cases it is one factor limiting device performance. Improvements in process control and methodology are expected to lead to additional benefits of higher yield, greater reliability and lower costs. Since reliability and performance are critical to these devices, an understanding of the basic physics of the devices and device failure mechanisms is necessary to effectively improve the product. The discussion will highlight some of the more basic material science problems remaining to be solved. In addition, consideration will be given to packaging technology and the need for the development of novel materials and geometries to increase the efficiencies and reliability of the devices. The discussion will emphasize the performance criteria necessary to meet lighting applications, in order to illustrate the gap between current status and market expectations for future product.

  14. Fukushima Light Water Detritiation System Presentation

    Office of Environmental Management (EM)

    Doc No: 8000-0685 1 Light Isotope Technology Centre of Excellence Fukushima Light Water Detritiation System Water Distillation Option A. Busigin, Ph.D., P.Eng. and P. Mason, P.Eng....

  15. LEDs for Street Lighting—Here Today

    SciTech Connect (OSTI)

    2013-11-29

    Fact sheet that provides a brief overview of the viability of LED street lighting in municipalities and highlights case studies of two cities—Los Angeles and Seattle—that have invested in LED street lighting.

  16. Lumens and the Lighting Facts Label

    Broader source: Energy.gov [DOE]

    When you're shopping for lightbulbs, compare lumens and use the Lighting Facts label to be sure you're getting the amount of light, or level of brightness, you want.

  17. Light Transmission through Sub-Wavelength Apertures

    E-Print Network [OSTI]

    Visser, Taco D.

    Light Transmission through Sub-Wavelength Apertures #12;#12;VRIJE UNIVERSITEIT Light Transmission Transmission through a Single Sub-wavelength Slit 59 3.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 3.2 The configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 3.3 Transmission

  18. Light celebrating place, West Texas Road Trip 

    E-Print Network [OSTI]

    Mulholland, Jill Cecilia

    2009-05-15

    Calcite Tests: Light and Texture ................................................................ 227 107 Calcite Tests: Light and Geologic Cleavage Planes................................... 227 108 UV Tests: Color Mixing Chart...................................................................... 228 109 UV Tests: UV Paint Sample....................................................................... 229 110 Dichroic Glass Tests: Reflections .............................................................. 230 111 Dichroic Glass Tests...

  19. Demonstration Assessment of LED Freezer Case Lighting

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Demonstration Assessment of Light-Emitting Diode (LED) Freezer Case Lighting Host Site: Albertsons Grocery, Eugene, Oregon Final Report prepared in support of the U.S. DOE Solid...

  20. Portable lamp with dynamically controlled lighting distribution

    DOE Patents [OSTI]

    Siminovitch, Michael J. (Pinole, CA); Page, Erik R. (Berkeley, CA)

    2001-01-01

    A double lamp table or floor lamp lighting system has a pair of compact fluorescent lamps (CFLs) arranged vertically with a reflective septum in between. By selectively turning on one or both of the CFLs, down lighting, up lighting, or both up and down lighting is produced. The control system can also vary the light intensity from each CFL. The reflective septum insures that almost all the light produced by each lamp will be directed into the desired light distribution pattern which is selected and easily changed by the user. Planar compact fluorescent lamps, e.g. circular CFLs, particularly oriented horizontally, are preferable. CFLs provide energy efficiency. The lighting system may be designed for the home, hospitality, office or other environments.

  1. Text-Alternative Version LED Lighting Forecast

    Broader source: Energy.gov [DOE]

    The DOE report Energy Savings Forecast of Solid-State Lighting in General Illumination Applications estimates the energy savings of LED white-light sources over the analysis period of 2013 to 2030....

  2. LIGHT EMITTING DIODE CHARACTERISTICS (SAMPLE LAB WRITEUP)

    E-Print Network [OSTI]

    McNeill, John A.

    1 LIGHT EMITTING DIODE CHARACTERISTICS (SAMPLE LAB WRITEUP) John A. McNeill ECE Box 000 January 19, 1997 ABSTRACT This lab investigates the V-I characteristic of a light-emitting diode (LED

  3. A light emitting object and its environment

    E-Print Network [OSTI]

    Jeibmann, Jon Karl

    1983-01-01

    The object that is intentionally produced with the inherent spirit of "Fine Art," will always be placed with a reverence for its setting. "LIGHT GRID" is a light sculpture with flexibility to utilize the environment where ...

  4. DOE ZERH Webinar: LED Lighting Efficiency

    Broader source: Energy.gov [DOE]

    Description: LED lighting offers efficiency and performance benefits we've never seen in traditional lighting technologies. Commercial buildings have seen rapid growth in LED deployment, and in the...

  5. A New Light on Disordered Ensembles

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A New Light on Disordered Ensembles A New Light on Disordered Ensembles Print Wednesday, 27 April 2011 00:00 Because individual biomolecules are very small, x-ray scattering...

  6. Tips: Shopping for Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    17, 2014 - 7:27pm Addthis With an array of lighting options, use the Lighting Facts label to determine the right lightbulb for you. | Photo courtesy of Michelle Vigen,

  7. Embodied Energy and Off-Grid Lighting

    E-Print Network [OSTI]

    Alstone, Peter

    2012-01-01

    Life Cycle Assessment of Off-Grid Lighting Applications:Testing for Emerging Off-grid White-LED Illumination SystemsBudget: The Economics of Off-Grid Lighting for Small

  8. SSL Demonstration: Bridge Lighting, Minneapolis, MN

    SciTech Connect (OSTI)

    2014-10-01

    DOE Solid-State Lighting GATEWAY summary brief for Phase II report on the longer-term performance of LED lighting installed in 2008 on the I-35W Bridge in Minneapolis, MN.

  9. Peninsula Light Company PenLight | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop Inc Jump to:Newberg,Energy LLC Jump to:3 ofAltos delValley ElPemelCompany PenLight

  10. Types of Lighting in Commercial Buildings - Lighting Types

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home PageMonthly","10/2015"4,"Ames5 Tables July 1996 Energy Information Administration Office of Coal,Demand Module of the National Energy Modeling System:Changes inLighting

  11. Considering LEDs for Street and Area Lighting

    Broader source: Energy.gov [DOE]

    View Jim Brodrick's keynote video from the September 2009 IES Street and Area Lighting Conference in Philadelphia.

  12. Lighting system with heat distribution face plate

    DOE Patents [OSTI]

    Arik, Mehmet; Weaver, Stanton Earl; Stecher, Thomas Elliot; Kuenzler, Glenn Howard; Wolfe, Jr., Charles Franklin; Li, Ri

    2013-09-10

    Lighting systems having a light source and a thermal management system are provided. The thermal management system includes synthetic jet devices, a heat sink and a heat distribution face plate. The synthetic jet devices are arranged in parallel to one and other and are configured to actively cool the lighting system. The heat distribution face plate is configured to radially transfer heat from the light source into the ambient air.

  13. Learning Artistic Lighting Template from Portrait Photographs

    E-Print Network [OSTI]

    Zhu, Song Chun

    Learning Artistic Lighting Template from Portrait Photographs Xin Jin1 , Mingtian Zhao2,3 , Xiaowu artistic portrait lighting template from a dataset of artistic and daily portrait photographs. The learned aesthetic quality assess- ment of these photographs in lighting usage. For learning the template, we adopt

  14. Tabletop Computed Lighting for Practical Digital Photography

    E-Print Network [OSTI]

    Bailey, Reynold J.

    Tabletop Computed Lighting for Practical Digital Photography Ankit Mohan, Reynold Bailey, Jonathan Abstract--We apply simplified image-based lighting methods to reduce the equipment, cost, time, and specialized skills required for high-quality photographic lighting of desktop-sized static objects

  15. Exposing Digital Forgeries in Complex Lighting Environments

    E-Print Network [OSTI]

    Bucci, David J.

    1 Exposing Digital Forgeries in Complex Lighting Environments Micah K. Johnson, Student Member describe a technique for exposing such fakes by detecting inconsistencies in lighting. We show how to approximate complex lighting environments with a low-dimensional model and, further, how to estimate the model

  16. Energy Conservation Utilizing Wireless Dimmable Lighting Control

    E-Print Network [OSTI]

    Agogino, Alice M.

    Energy Conservation Utilizing Wireless Dimmable Lighting Control in a Shared-Space Office Yao Lighting accounts for 25-30% of energy usage in building electrical systems Energy savings can be generated from various lighting management strategies · Daylight harvesting (35-40% in daylit area, 12

  17. Energy-efficient lighting system for television

    DOE Patents [OSTI]

    Cawthorne, Duane C. (Amarillo, TX)

    1987-07-21

    A light control system for a television camera comprises an artificial light control system which is cooperative with an iris control system. This artificial light control system adjusts the power to lamps illuminating the camera viewing area to provide only sufficient artificial illumination necessary to provide a sufficient video signal when the camera iris is substantially open.

  18. Lighting market sourcebook for the US

    SciTech Connect (OSTI)

    Vorsatz, D.; Shown, L.; Koomey, J.; Moezzi, M.; Denver, A.; Atkinson, B.

    1997-12-01

    Throughout the United States, in every sector and building type, lighting is a significant electrical end-use. Based on the many and varied studies of lighting technologies, and experience with programs that promote lighting energy-efficiency, there is a significant amount of cost-effective energy savings to be achieved in the lighting end use. Because of such potential savings, and because consumers most often do not adopt cost-effective lighting technologies on their own, programs and policies are needed to promote their adoption. Characteristics of lighting energy use, as well as the attributes of the lighting marketplace, can significantly affect the national pattern of lighting equipment choice and ownership. Consequently, policy makers who wish to promote energy-efficient lighting technologies and practices must understand the lighting technologies that people use, the ways in which they use them, and marketplace characteristics such as key actors, product mix and availability, price spectrum, and product distribution channels. The purpose of this report is to provide policy-makers with a sourcebook that addresses patterns of lighting energy use as well as data characterizing the marketplace in which lighting technologies are distributed, promoted, and sold.

  19. Promising Technology: Wireless Lighting Occupancy Sensors

    Broader source: Energy.gov [DOE]

    Occupancy sensors and controls detect human presence, and modulate light settings accordingly. When there is no human presence detected, the system can dim or turn off lights. This technology ensures that lights are not used when there are no occupants present, which can lead to significant energy savings.

  20. Sphere Light Field Rendering Zigang Wang1

    E-Print Network [OSTI]

    Sphere Light Field Rendering Zigang Wang1 and Zhengrong Liang1,2 Departments of Radiology1 and Computer Science2 , State University of New York, Stony Brook, NY 11794, USA ABSTRACT Light field algorithm is one of the most famous image-based rendering techniques. In this paper, an improved light field

  1. TECH pulse Light stopped for a minute

    E-Print Network [OSTI]

    Rotter, Stefan

    TECH pulse · Light stopped for a minute DARMSTADT, Germany - At 186,000 miles per second, the speed of light is unparalleled, so slowing it down is a for- midable challenge - and stopping it seems impossible. But physicists in Germany report using a glasslike crystal to stop light for about one minute, which could have

  2. Depolarization of backscattered linearly polarized light

    E-Print Network [OSTI]

    Lacoste, David

    Depolarization of backscattered linearly polarized light Luis Fernando Rojas-Ochoa Department of backscattered linearly polarized light with an extended photon dif- fusion formalism taking explicitly, the characteristic depolarization length for linearly polarized light, lp , is deduced. We investigate the dependence

  3. THELUMINAPROJECT http://light.lbl.gov

    E-Print Network [OSTI]

    Jacobson, Arne

    THELUMINAPROJECT http://light.lbl.gov The Lumina Project includes an Off-Grid Lighting Technology of off-grid lighting solutions for the developing world. Periodic Research Notes present new results vary depending on the intensity of use patterns. To avoid a potential market spoiling effect for off-grid

  4. LED Lighting in a Performing Arts Building

    SciTech Connect (OSTI)

    Miller, N. J.; Kaye, S. M.; Coleman, P. M.; Wilkerson, A. M.; Perrin, T. E.; Sullivan, G. P.

    2014-07-31

    At the University of Florida in Gainesville, the DOE Solid-State Lighting GATEWAY program evaluated LED architectural and theatrical lighting in four academic/performance-related spaces within the Nadine McGuire Theatre + Dance Pavilion. Due to a wise choice of products and luminaire light distributions, the change brought significant quality improvements including improved controllability and color.

  5. Light Duty Efficient, Clean Combustion

    SciTech Connect (OSTI)

    Donald Stanton

    2010-12-31

    Cummins has successfully completed the Light Duty Efficient Clean Combustion (LDECC) cooperative program with DoE. This program was established in 2007 in support of the Department of Energy's Vehicles Technologies Advanced Combustion and Emissions Control initiative to remove critical barriers to the commercialization of advanced, high efficiency, emissions compliant internal combustion (IC) engines for light duty vehicles. Work in this area expanded the fundamental knowledge of engine combustion to new regimes and advanced the knowledge of fuel requirements for these diesel engines to realize their full potential. All of the following objectives were met with fuel efficiency improvement targets exceeded: (1) Improve light duty vehicle (5000 lb. test weight) fuel efficiency by 10.5% over today's state-of-the-art diesel engine on the FTP city drive cycle; (2) Develop and design an advanced combustion system plus aftertreatment system that synergistically meets Tier 2 Bin 5 NOx and PM emissions standards while demonstrating the efficiency improvements; (3) Maintain power density comparable to that of current conventional engines for the applicable vehicle class; and (4) Evaluate different fuel components and ensure combustion system compatibility with commercially available biofuels. Key accomplishments include: (1) A 25% improvement in fuel efficiency was achieved with the advanced LDECC engine equipped with a novel SCR aftertreatment system compared to the 10.5% target; (2) An 11% improvement in fuel efficiency was achieved with the advanced LDECC engine and no NOx aftertreamtent system; (3) Tier 2 Bin 5 and SFTP II emissions regulations were met with the advanced LDECC engine equipped with a novel SCR aftertreatment system; (4) Tier 2 Bin 5 emissions regulations were met with the advanced LDECC engine and no NOx aftertreatment, but SFTP II emissions regulations were not met for the US06 test cycle - Additional technical barriers exist for the no NOx aftertreatment engine; (5) Emissions and efficiency targets were reached with the use of biodiesel. A variety of biofuel feedstocks (soy, rapeseed, etc.) was investigated; (6) The advanced LDECC engine with low temperature combustion was compatible with commercially available biofuels as evaluated by engine performance testing and not durability testing; (7) The advanced LDECC engine equipped with a novel SCR aftertreatment system is the engine system architecture that is being further developed by the Cummins product development organization. Cost reduction and system robustness activities have been identified for future deployment; (8) The new engine and aftertreatment component technologies are being developed by the Cummins Component Business units (e.g. fuel system, turbomachinery, aftertreatment, electronics, etc.) to ensure commercial viability and deployment; (9) Cummins has demonstrated that the technologies developed for this program are scalable across the complete light duty engine product offerings (2.8L to 6.7L engines); and (10) Key subsystems developed include - sequential two stage turbo, combustions system for low temperature combustion, novel SCR aftertreatment system with feedback control, and high pressure common rail fuel system. An important element of the success of this project was leveraging Cummins engine component technologies. Innovation in component technology coupled with system integration is enabling Cummins to move forward with the development of high efficiency clean diesel products with a long term goal of reaching a 40% improvement in thermal efficiency for the engine plus aftertreatment system. The 40% improvement is in-line with the current light duty vehicle efficiency targets set by the 2010 DoE Vehicle Technologies MYPP and supported through co-operative projects such as the Cummins Advanced Technology Powertrains for Light-Duty Vehicles (ATP-LD) started in 2010.

  6. Light Duty Efficient, Clean Combustion

    SciTech Connect (OSTI)

    Stanton, Donald W

    2011-06-03

    Cummins has successfully completed the Light Duty Efficient Clean Combustion (LDECC) cooperative program with DoE. This program was established in 2007 in support of the Department of Energy’s Vehicles Technologies Advanced Combustion and Emissions Control initiative to remove critical barriers to the commercialization of advanced, high efficiency, emissions compliant internal combustion (IC) engines for light duty vehicles. Work in this area expanded the fundamental knowledge of engine combustion to new regimes and advanced the knowledge of fuel requirements for these diesel engines to realize their full potential. All of the following objectives were met with fuel efficiency improvement targets exceeded: 1. Improve light duty vehicle (5000 lb. test weight) fuel efficiency by 10.5% over today’s state-ofthe- art diesel engine on the FTP city drive cycle 2. Develop & design an advanced combustion system plus aftertreatment system that synergistically meets Tier 2 Bin 5 NOx and PM emissions standards while demonstrating the efficiency improvements. 3. Maintain power density comparable to that of current conventional engines for the applicable vehicle class. 4. Evaluate different fuel components and ensure combustion system compatibility with commercially available biofuels. Key accomplishments include: ? A 25% improvement in fuel efficiency was achieved with the advanced LDECC engine equipped with a novel SCR aftertreatment system compared to the 10.5% target ? An 11% improvement in fuel efficiency was achieved with the advanced LDECC engine and no NOx aftertreamtent system ? Tier 2 Bin 5 and SFTP II emissions regulations were met with the advanced LDECC engine equipped with a novel SCR aftertreatment system ? Tier 2 Bin 5 emissions regulations were met with the advanced LDECC engine and no NOx aftertreatment, but SFTP II emissions regulations were not met for the US06 test cycle – Additional technical barriers exist for the no NOx aftertreatment engine ? Emissions and efficiency targets were reached with the use of biodiesel. A variety of biofuel feedstocks (soy, rapeseed, etc.) was investigated. ? The advanced LDECC engine with low temperature combustion was compatible with commercially available biofuels as evaluated by engine performance testing and not durability testing. ? The advanced LDECC engine equipped with a novel SCR aftertreatment system is the engine system architecture that is being further developed by the Cummins product development organization. Cost reduction and system robustness activities have been identified for future deployment. ? The new engine and aftertreatment component technologies are being developed by the Cummins Component Business units (e.g. fuel system, turbomachinery, aftertreatment, electronics, etc.) to ensure commercial viability and deployment ? Cummins has demonstrated that the technologies developed for this program are scalable across the complete light duty engine product offerings (2.8L to 6.7L engines) ? Key subsystems developed include – sequential two stage turbo, combustions system for low temperature combustion, novel SCR aftertreatment system with feedback control, and high pressure common rail fuel system An important element of the success of this project was leveraging Cummins engine component technologies. Innovation in component technology coupled with system integration is enabling Cummins to move forward with the development of high efficiency clean diesel products with a long term goal of reaching a 40% improvement in thermal efficiency for the engine plus aftertreatment system. The 40% improvement is in-line with the current light duty vehicle efficiency targets set by the 2010 DoE Vehicle Technologies MYPP and supported through co-operative projects such as the Cummins Advanced Technology Powertrains for Light- Duty Vehicles (ATP-LD) started in 2010.

  7. Energy Efficiency Through Lighting Upgrades

    SciTech Connect (OSTI)

    Kara Berst; Maria Howeth

    2010-06-01

    Lighting upgrades including neon to LED, incandescent to CFL's and T-12 to T-8 and T-5's were completed through this grant. A total of 16 Chickasaw nation facilities decreased their carbon footprint because of these grant funds. Calculations used were based on comparing the energy usage from the previous year�¢����s average and the current energy usage. For facilities without a full year's set of energy bills, the month after installation was compared to the same month from the previous year. Overall, the effect the lighting change-outs had for the gaming centers and casinos far exceeded expectations. For the Madill Gaming Center; both an interior and exterior upgrade was performed which resulted in a 31% decrease in energy consumption. This same reduction was seen in every facility that participated in the grant. Just by simply changing out light bulbs to newer energy efficient equivalents, a decrease in energy usage can be achieved and this was validated by the return on investment seen at Chickasaw Nation facilities. Along with the technical project tasks were awareness sessions presented at Chickasaw Head Starts. The positive message of environmental stewardship was passed down to head start students and passed along to Chickasaw employees. Excitement was created in those that learned what they could do to help reduce their energy bills and many followed through and took the idea home. For a fairy low cost, the general public can also use this technique to lower their energy consumption both at home and at work. Although the idea behind the project was somewhat simple, true benefits have been gained through environmental awareness and reductions of energy costs.

  8. Slow light microfluidics: a proposal

    E-Print Network [OSTI]

    Sumetsky, M

    2014-01-01

    The resonant slow light structures created along a thin-walled optical capillary by nanoscale deformation of its surface can perform comprehensive simultaneous detection and manipulation of microfluidic components. This concept is illustrated with a model of a 0.5 millimeter long 5 nm high triangular bottle resonator created at a 50 micron radius silica capillary containing floating microparticles. The developed theory shows that the microparticle positions can be determined from the bottle resonator spectrum. In addition, the microparticles can be driven and simultaneously positioned at predetermined locations by the localized electromagnetic field created by the optimized superposition of eigenstates of this resonator, thus, exhibiting a multicomponent near field optical tweezers.

  9. BBN with light dark matter

    SciTech Connect (OSTI)

    Berezhiani, Zurab [Dipartimento di Fisica, Università dell'Aquila, Via Vetoio, 67100 Coppito, L'Aquila (Italy); Dolgov, Aleksander; Tkachev, Igor, E-mail: Zurab.Berezhiani@aquila.infn.it, E-mail: dolgov@fe.infn.it, E-mail: tkachev@ms2.inr.ac.ru [Laboratory of Cosmology and Elementary Particles, Novosibirsk State University, Pirogov street 2, 630090 Novosibirsk (Russian Federation)

    2013-02-01

    Effects of light millicharged dark matter particles on primordial nucleosynthesis are considered. It is shown that if the mass of such particles is much smaller than the electron mass, they lead to strong overproduction of Helium-4. An agreement with observations can be achieved by non-vanishing lepton asymmetry. Baryon-to-photon ratio at BBN and neutrino-to-photon ratio both at BBN and at recombination are noticeably different as compared to the standard cosmological model. The latter ratio and possible lepton asymmetry could be checked by Planck. For higher mass of new particles the effect is much less pronounced and may even have opposite sign.

  10. Sandia Energy - Light Creation Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDid youOxygenLaboratory Fellows Jerry Simmons Is One of ThreeLight

  11. Shedding Light on Nanocrystal Defects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effect Photovoltaics -7541 Unlimited Release4:SeymourShedding Light on Nanocrystal

  12. Shedding Light on Nanocrystal Defects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effect Photovoltaics -7541 Unlimited Release4:SeymourShedding Light on

  13. Shedding Light on Nanocrystal Defects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effect Photovoltaics -7541 Unlimited Release4:SeymourShedding Light onShedding

  14. Shedding Light on Nanocrystal Defects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effect Photovoltaics -7541 Unlimited Release4:SeymourShedding Light

  15. Demonstration of LED Street Lighting

    Office of Scientific and Technical Information (OSTI)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield MunicipalTechnical Report:Speeding accessby aLED Street Lighting Host Site: City of Kansas City,

  16. Morning Light | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceII Jump to: navigation, searchsource History ViewMoeOhio:Light Jump to: navigation,

  17. Tips: Lighting | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematics And Statistics » USAJobsMotionHeatEnergy Solar Training for Veterans toHomeLighting Tips:

  18. Tips: Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsofProgram: Report1538-1950 Timeline of Events: 1938-1950InsulationLighting Tips:

  19. Lighting Basics | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousand CubicResourcelogo and-E C H N13,CenterCenterLighting Sign

  20. Human lightness perception is guided by simple assumptions about reflectance and lighting

    E-Print Network [OSTI]

    Murray, Richard

    Human lightness perception is guided by simple assumptions about reflectance and lighting Richard F 0009, Toronto, Ontario, Canada, M3J 1P3 ABSTRACT Lightness constancy is the remarkable ability of human successful approaches to understanding lightness perception that have developed along independent paths

  1. Metameric Modulation for Diffuse Visible Light Communications with Constant Ambient Lighting

    E-Print Network [OSTI]

    Little, Thomas

    untapped for wireless communications. Advancements in light emitting diode (LED) technology are making

  2. Light extraction analysis and enhancement in a quantum dot light emitting diode

    E-Print Network [OSTI]

    Wu, Shin-Tson

    Light extraction analysis and enhancement in a quantum dot light emitting diode Ruidong Zhu outcoupling and angular performance of quantum dot light emitting diode (QLED). To illustrate the design principles, we use a red QLED as an example and compare its performance with an organic light emitting diode

  3. Deblurring Low-light Images with Light Streaks Sunghyun Cho2

    E-Print Network [OSTI]

    Yang, Ming-Hsuan

    Deblurring Low-light Images with Light Streaks Zhe Hu1 Sunghyun Cho2 Jue Wang2 Ming-Hsuan Yang1 1 University of California, Merced 2 Adobe Research Abstract Images taken in low-light conditions with handheld been made recently on image deblurring, state-of-the-art approaches often fail on low-light images

  4. Stopping of Light by the Dynamic Tuning of Photonic Crystal Slow Light Device

    E-Print Network [OSTI]

    Baba, Toshihiko

    Stopping of Light by the Dynamic Tuning of Photonic Crystal Slow Light Device Yuji Saito1-cho, Chiyodaku, Tokyo 102-0075, Japan *baba@ynu.ac.jp Abstract: We propose a simple technique of stopping light pulses using a slow-light device based on photonic crystal coupled waveguide (PCCW). Dynamically tuning

  5. Material slow light and structural slow light: similarities and differences for nonlinear optics [Invited

    E-Print Network [OSTI]

    Boyd, Robert W.

    Material slow light and structural slow light: similarities and differences for nonlinear optics There are two standard methods for controlling the group velocity of light. One makes use of the dispersive nonlinear optical processes are enhanced through use of slow-light interactions and when they are not

  6. Light Extraction Efficiency and Radiation Patterns of III-Nitride Light-Emitting Diodes

    E-Print Network [OSTI]

    Gilchrist, James F.

    Light Extraction Efficiency and Radiation Patterns of III-Nitride Light-Emitting Diodes, IEEE DOI: 10.1109/JPHOT.2011.2150745 1943-0655/$26.00 ©2011 IEEE #12;Light Extraction Efficiency and Radiation Patterns of III-Nitride Light-Emitting Diodes With Colloidal Microlens Arrays With Various Aspect

  7. A Light Transport Framework for Lenslet Light Field Cameras Chia-Kai Liang

    E-Print Network [OSTI]

    California at San Diego, University of

    A Light Transport Framework for Lenslet Light Field Cameras Chia-Kai Liang Lytro Inc and Ravi Ramamoorthi University of California, San Diego Light field cameras capture full spatio-angular information of the light field, and enable many novel photographic and scientific applications. It is often stated

  8. Strategy Guideline. High Performance Residential Lighting

    SciTech Connect (OSTI)

    Holton, J.

    2012-02-01

    This report has been developed to provide a tool for the understanding and application of high performance lighting in the home. The strategies featured in this guide are drawn from recent advances in commercial lighting for application to typical spaces found in residential buildings. This guide offers strategies to greatly reduce lighting energy use through the application of high quality fluorescent and light emitting diode (LED) technologies. It is important to note that these strategies not only save energy in the home but also serve to satisfy the homeowner’s expectations for high quality lighting.

  9. Light propagation in the South Pole ice

    SciTech Connect (OSTI)

    Williams, Dawn; Collaboration: IceCube Collaboration

    2014-11-18

    The IceCube Neutrino Observatory is located in the ice near the geographic South Pole. Particle showers from neutrino interactions in the ice produce light which is detected by IceCube modules, and the amount and pattern of deposited light are used to reconstruct the properties of the incident neutrino. Since light is scattered and absorbed by ice between the neutrino interaction vertex and the sensor, IceCube event reconstruction depends on understanding the propagation of light through the ice. This paper presents the current status of modeling light propagation in South Pole ice, including the recent observation of an azimuthal anisotropy in the scattering.

  10. Technology Development for Light Duty High Efficient Diesel Engines...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Light Duty High Efficient Diesel Engines Technology Development for Light Duty High Efficient Diesel Engines Improve the efficiency of diesel engines for light duty applications...

  11. Product Quality Assurance for Off-Grid Lighting in Africa

    E-Print Network [OSTI]

    Mills, Evan; World Bank

    2008-01-01

    approach to selecting LED lighting, in order not to delayagencies to qualify LED lighting products for bulk orto accelerate, making LED lighting systems more feasible and

  12. Joint Visible Light Communication and Navigation via LEDs

    E-Print Network [OSTI]

    Zheng, Dongfang

    2014-01-01

    modulated automobile LED lightings to estimate the vehiclemodulates the automobile LED lighting - either taillights orpositioning using lighting led and image sensor. In Computer

  13. Effect of Research on Lighting for Modern Dance

    E-Print Network [OSTI]

    Grabowski, Andrew

    2013-01-01

    Print. Staines, Jackie. Lighting Techniques for Theatre In-Bibliography Graves, R. B. Lighting The Shakespearean Stage,Stanley. A Syllabus of Stage Lighting. New York: Drama Books

  14. Demonstration Assessment of Light-Emitting Diode Parking Structure...

    Office of Scientific and Technical Information (OSTI)

    Parking Structure Lighting at U.S. Department of Labor Headquarters Kinzey, Bruce R.; Myer, Michael solid-state lighting; LEDs; occupancy sensor controls; parking facility lighting...

  15. Energy Savings Potential for Street Lighting in India

    E-Print Network [OSTI]

    Johnson, Alissa K.

    2014-01-01

    18] P. Morante, “ Mesopic Street Lighting Demonstration andEvaluation Final Report,” Lighting Research Center,switching to LED street lighting,” 17-Apr-2013. [Online].

  16. The perception of shape, lighting, and material properties in images

    E-Print Network [OSTI]

    O'Shea, James Patrick

    2012-01-01

    the true lighting direction. . . . . . . . . . . . . . . .rep- resent different lighting tilts on the test object. Thedirection. We found the lighting used in the center image

  17. Stochastically Lighting Up Galaxies: Statistical Implications of Stellar Clustering

    E-Print Network [OSTI]

    da Silva, Robert Louis

    2014-01-01

    SANTA CRUZ STOCHASTICALLY LIGHTING UP GALAXIES: STATISTICAL2 SLUG - Stochastically Lighting Up Galaxies: Methods andx Abstract Stochastically Lighting Up Galaxies: Statistical

  18. Product Quality Assurance for Off-Grid Lighting in Africa

    E-Print Network [OSTI]

    Mills, Evan; World Bank

    2008-01-01

    Jeffrey Miller Pivotal Lighting Design 1601 Fifth Avenueaffordable, sustainable, lighting available to the millionsable to realize modern lighting options. R; Doluweera Peon,

  19. Lighting Market Sourcebook for the U.S.

    E-Print Network [OSTI]

    Vorsatz, D.; Shown, L.; Koomey, J.; Moezzi, M.; Denver, A.; Atkinson, B.

    1997-01-01

    Potentials: Analysis of the Lighting Sector. Doctoral1996b. Residential Lighting: Use and Potential Savings.1993. Research for "The Lighting Pattern Book for Homes",

  20. Lighting and Daylighting Products and Services | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lighting and Daylighting Products and Services Lighting and Daylighting Products and Services Lighting and Daylighting Products and Services Use the following links to get product...

  1. Demonstration Assessment of Light-Emitting Diode (LED) Street...

    Office of Scientific and Technical Information (OSTI)

    Street Lighting Host Site: Lija Loop, Portland, Oregon Citation Details In-Document Search Title: Demonstration Assessment of Light-Emitting Diode (LED) Street Lighting Host Site:...

  2. Sandia Energy - Brief History of Solid-State Lighting Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Brief History of Solid-State Lighting Technology Home Energy Research EFRCs Solid-State Lighting Science EFRC Overview Brief History of Solid-State Lighting Technology Brief...

  3. DOE Solid-State Lighting Program: Modest Investments, Extraordinary...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Modest Investments, Extraordinary Impacts DOE Solid-State Lighting Program Shaping the Future of Solid-State Lighting Today, LED (light-emitting diode) technologies illuminate...

  4. Energy Savings Potential for Street Lighting in India

    E-Print Network [OSTI]

    Johnson, Alissa K.

    2014-01-01

    M. B. Kostic, “Light-emitting diodes in street and roadwayCompact fluorescent Light emitting diode High intensityCompact fluorescent Light emitting diode Mercury Vapor High

  5. Product Quality Assurance for Off-Grid Lighting in Africa

    E-Print Network [OSTI]

    Mills, Evan; World Bank

    2008-01-01

    for Off-Grid Lighting in Africa Conference Proceedingsfrom the Lighting Africa Product Quality Assurance WorkshopSUMMARY Background Lighting Africa is a World Bank Group

  6. Myosin Light Chain Kinase Signaling in Endothelial Barrier Dysfunction

    E-Print Network [OSTI]

    Rigor, Robert R Ph.D.

    2012-01-01

    in response to phosphorylation of myosin light chainby myosin light chain kinase (MLCK). MLCK- dependent2013 Key words: myosin light chain kinase (MLCK); protein

  7. Robust light transport simulation using progressive density estimation

    E-Print Network [OSTI]

    Hachisuka, Toshiya

    2011-01-01

    iv Chapter 4 Light Transport Theory . . . . . . . . . 4.14.3 Interaction of Light with Surfaces 4.4 Renderingcaustics due to a directional light source. . . . . Color-

  8. Information for Media on Lighting Choices | Department of Energy

    Energy Savers [EERE]

    Information for Media on Lighting Choices Information for Media on Lighting Choices July 27, 2014 - 8:25am Addthis Information for Media on Lighting Choices These videos,...

  9. 2010 U.S. Lighting Market Characterization - Excel workbook ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0 U.S. Lighting Market Characterization - Excel workbook 2010 U.S. Lighting Market Characterization - Excel workbook Contains all data provided in the Lighting Market...

  10. Illuminating system and method for specialized and decorative lighting using liquid light guides

    DOE Patents [OSTI]

    Zorn, C.J.; Kross, B.J.; Majewski, S.; Wojcik, R.F.

    1998-08-25

    The present invention comprises an illumination system for specialized decorative lighting including a light source, a flexible plastic tube sheath for distributing the light to a remote location, a transparent liquid core filling the tube that has an index of refraction greater than that of the plastic tube and an arrangement where light coupled from the light source is caused to leak from the liquid light guide at desired locations for the purposes of specialized lighting, such as underwater illumination in swimming pools. 5 figs.

  11. LIGHT PHOTINOS AS DARK MATTER

    E-Print Network [OSTI]

    Glennys R. Farrar; Edward W. Kolb

    1995-04-24

    There are good reasons to consider models of low-energy supersymmetry with very light photinos and gluinos. In a wide class of models the lightest $R$-odd, color-singlet state containing a gluino, the $\\r0$, has a mass in the 1-2 GeV range and the slightly lighter photino, $\\pho$, would survive as the relic $R$-odd species. For the light photino masses considered here, previous calculations resulted in an unacceptable photino relic abundance. But we point out that processes other than photino self-annihilation determine the relic abundance when the photino and $R^0$ are close in mass. Including $\\r0\\longleftrightarrow\\pho$ processes, we find that the photino relic abundance is most sensitive to the $\\r0$-to-$\\pho$ mass ratio, and within model uncertainties, a critical density in photinos may be obtained for an $\\r0$-to-$\\pho$ mass ratio in the range 1.2 to 2.2. We propose photinos in the mass range of 500 MeV to 1.6 GeV as a dark matter candidate, and discuss a strategy to test the hypothesis.

  12. Controls for Solid-State Lighting

    SciTech Connect (OSTI)

    Rubinstein, Francis

    2007-06-22

    This study predicts new hybrid lighting applications for LEDs. In hybrid lighting, LEDs provide a low-energy 'standby' light level while another, more powerful, efficient light source provides light for occupied periods. Lighting controls will allow the two light sources to work together through an appropriate control strategy, typically motion-sensing. There are no technical barriers preventing the use of low through high CRI LEDs for standby lighting in many interior and exterior applications today. The total luminous efficacy of LED systems could be raised by increasing the electrical efficiency of LED drivers to the maximum practically achievable level (94%). This would increase system luminous efficacy by 20-25%. The expected market volumes for many types of LEDs should justify the evolution of new LED drivers that use highly efficient ICs and reduce parts count by means of ASICs. Reducing their electronics parts count by offloading discrete components onto integrated circuits (IC) will allow manufacturers to reduce the cost of LED driver electronics. LED luminaire manufacturers will increasingly integrate the LED driver and thermal management directly in the LED fixture. LED luminaires of the future will likely have no need for separable lamp and ballast because the equipment life of all the LED luminaire components will all be about the same (50,000 hours). The controls and communications techniques used for communicating with conventional light sources, such as dimmable fluorescent lighting, are appropriate for LED illumination for energy management purposes. DALI has been used to control LED systems in new applications and the emerging ZigBee protocol could be used for LEDs as well. Major lighting companies are already moving in this direction. The most significant finding is that there is a significant opportunity to use LEDs today for standby lighting purposes. Conventional lighting systems can be made more efficient still by using LEDs to provide a low-energy standby state when lower light levels are acceptable.

  13. TPB-coated Light Guides for Liquid Argon TPC Light Detection Systems

    E-Print Network [OSTI]

    C. M. Ignarra

    2013-07-30

    Light detection systems in Liquid Argon Time Projection Chambers (LArTPCs) require the detection of the 128 nm light produced during argon scintillation. Most detectors use Tetraphenyl Butadiene (TPB) to shift the wavelength of the light into a range visible to Photomultiplier Tubes (PMTs). These proceedings summarize characterizations of light-guides coated with a matrix of TPB in UV transmitting acrylic which are more compact than existing LArTPC light collection systems.

  14. Demand Responsive Lighting: A Scoping Study

    SciTech Connect (OSTI)

    Rubinstein, Francis; Kiliccote, Sila

    2007-01-03

    The objective of this scoping study is: (1) to identify current market drivers and technology trends that can improve the demand responsiveness of commercial building lighting systems and (2) to quantify the energy, demand and environmental benefits of implementing lighting demand response and energy-saving controls strategies Statewide. Lighting systems in California commercial buildings consume 30 GWh. Lighting systems in commercial buildings often waste energy and unnecessarily stress the electrical grid because lighting controls, especially dimming, are not widely used. But dimmable lighting equipment, especially the dimming ballast, costs more than non-dimming lighting and is expensive to retrofit into existing buildings because of the cost of adding control wiring. Advances in lighting industry capabilities coupled with the pervasiveness of the Internet and wireless technologies have led to new opportunities to realize significant energy saving and reliable demand reduction using intelligent lighting controls. Manufacturers are starting to produce electronic equipment--lighting-application specific controllers (LAS controllers)--that are wirelessly accessible and can control dimmable or multilevel lighting systems obeying different industry-accepted protocols. Some companies make controllers that are inexpensive to install in existing buildings and allow the power consumed by bi-level lighting circuits to be selectively reduced during demand response curtailments. By intelligently limiting the demand from bi-level lighting in California commercial buildings, the utilities would now have an enormous 1 GW demand shed capability at hand. By adding occupancy and light sensors to the remotely controllable lighting circuits, automatic controls could harvest an additional 1 BkWh/yr savings above and beyond the savings that have already been achieved. The lighting industry's adoption of DALI as the principal wired digital control protocol for dimming ballasts and increased awareness of the need to standardize on emerging wireless technologies are evidence of this transformation. In addition to increased standardization of digital control protocols controller capabilities, the lighting industry has improved the performance of dimming lighting systems over the last two years. The system efficacy of today's current dimming ballasts is approaching that of non-dimming program start ballasts. The study finds that the benefits of applying digital controls technologies to California's unique commercial buildings market are enormous. If California were to embark on an concerted 20 year program to improve the demand responsiveness and energy efficiency of commercial building lighting systems, the State could avoid adding generation capacity, improve the elasticity of the grid, save Californians billion of dollars in avoided energy charges and significantly reduce greenhouse gas emissions.

  15. Green Light-Emitting Diode Makes Highly Efficient White Light; The Spectrum of Clean Energy Innovation (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-06-01

    Fact sheet describing NREL's green light emitting diode that can lead to higher efficiency white light used in indoor lighting applications.

  16. Appliances, Lighting, Electronics, and Miscellaneous Equipment Electricity Use in New Homes

    E-Print Network [OSTI]

    Brown, Richard E.; Rittelman, William; Parker, Danny; Homan, Gregory

    2007-01-01

    62440 Appliances, Lighting, Electronics, and Miscellaneousof California. Appliances, Lighting, Electronics, anduses (appliances, lighting, electronics, and miscellaneous

  17. Solid State Lighting Program (Falcon)

    SciTech Connect (OSTI)

    Meeks, Steven

    2012-06-30

    Over the past two years, KLA-Tencor and partners successfully developed and deployed software and hardware tools that increase product yield for High Brightness LED (HBLED) manufacturing and reduce product development and factory ramp times. This report summarizes our development effort and details of how the results of the Solid State Light Program (Falcon) have started to help HBLED manufacturers optimize process control by enabling them to flag and correct identified killer defect conditions at any point of origin in the process manufacturing flow. This constitutes a quantum leap in yield management over current practice. Current practice consists of die dispositioning which is just rejection of bad die at end of process based upon probe tests, loosely assisted by optical in-line monitoring for gross process deficiencies. For the first time, and as a result of our Solid State Lighting Program, our LED manufacturing partners have obtained the software and hardware tools that optimize individual process steps to control killer defects at the point in the processes where they originate. Products developed during our two year program enable optimized inspection strategies for many product lines to minimize cost and maximize yield. The Solid State Lighting Program was structured in three phases: i) the development of advanced imaging modes that achieve clear separation between LED defect types, improves signal to noise and scan rates, and minimizes nuisance defects for both front end and back end inspection tools, ii) the creation of defect source analysis (DSA) software that connect the defect maps from back-end and front-end HBLED manufacturing tools to permit the automatic overlay and traceability of defects between tools and process steps, suppress nuisance defects, and identify the origin of killer defects with process step and conditions, and iii) working with partners (Philips Lumileds) on product wafers, obtain a detailed statistical correlation of automated defect and DSA map overlay to failed die identified using end product probe test results. Results from our two year effort have led to “automated end-to-end defect detection” with full defect traceability and the ability to unambiguously correlate device killer defects to optically detected features and their point of origin within the process. Success of the program can be measured by yield improvements at our partner’s facilities and new product orders.

  18. Measured Off-Grid LED Lighting System Performance

    E-Print Network [OSTI]

    Granderson, Jessica

    2009-01-01

    4 Measured Off-Grid LED Lighting System Performance Jessicapeople, the quality of LED lighting products remains acomponents of off-grid LED lighting systems (e.g. light

  19. The Problem Conventional office lighting typically consists of bright fluo-

    E-Print Network [OSTI]

    by delamping--result in lower power consump- tion. The PLS, which features light-emitting diode (LED lighting is reduced and three light-emitting diode (LED) task lights (two desk lamps and one undercabinet

  20. Quantum Dot Light Emitting Diode

    SciTech Connect (OSTI)

    Keith Kahen

    2008-07-31

    The project objective is to create low cost coatable inorganic light emitting diodes, composed of quantum dot emitters and inorganic nanoparticles, which have the potential for efficiencies equivalent to that of LEDs and OLEDs and lifetime, brightness, and environmental stability between that of LEDs and OLEDs. At the end of the project the Recipient shall gain an understanding of the device physics and properties of Quantum-Dot LEDs (QD-LEDs), have reliable and accurate nanocrystal synthesis routines, and have formed green-yellow emitting QD-LEDs with a device efficiency greater than 3 lumens/W, a brightness greater than 400 cd/m2, and a device operational lifetime of more than 1000 hours. Thus the aim of the project is to break the current cost-efficiency paradigm by creating novel low cost inorganic LEDs composed of inorganic nanoparticles.

  1. Quantum Dot Light Emitting Diode

    SciTech Connect (OSTI)

    Kahen, Keith

    2008-07-31

    The project objective is to create low cost coatable inorganic light emitting diodes, composed of quantum dot emitters and inorganic nanoparticles, which have the potential for efficiencies equivalent to that of LEDs and OLEDs and lifetime, brightness, and environmental stability between that of LEDs and OLEDs. At the end of the project the Recipient shall gain an understanding of the device physics and properties of Quantum-Dot LEDs (QD-LEDs), have reliable and accurate nanocrystal synthesis routines, and have formed green-yellow emitting QD-LEDs with a device efficiency greater than 3 lumens/W, a brightness greater than 400 cd/m{sup 2}, and a device operational lifetime of more than 1000 hours. Thus the aim of the project is to break the current cost-efficiency paradigm by creating novel low cost inorganic LEDs composed of inorganic nanoparticles.

  2. Frozen light in periodic metamaterials

    E-Print Network [OSTI]

    A. Figotin; I. Vitebskiy

    2006-09-16

    Wave propagation in spatially periodic media, such as photonic crystals, can be qualitatively different from any uniform substance. The differences are particularly pronounced when the electromagnetic wavelength is comparable to the primitive translation of the periodic structure. In such a case, the periodic medium cannot be assigned any meaningful refractive index. Still, such features as negative refraction and/or opposite phase and group velocities for certain directions of light propagation can be found in almost any photonic crystal. The only reservation is that unlike hypothetical uniform left-handed media, photonic crystals are essentially anisotropic at frequency range of interest. Consider now a plane wave incident on a semi-infinite photonic crystal. One can assume, for instance, that in the case of positive refraction, the normal components of the group and the phase velocities of the transmitted Bloch wave have the same sign, while in the case of negative refraction, those components have opposite signs. What happens if the normal component of the transmitted wave group velocity vanishes? Let us call it a "zero-refraction" case. At first sight, zero normal component of the transmitted wave group velocity implies total reflection of the incident wave. But we demonstrate that total reflection is not the only possibility. Instead, the transmitted wave can appear in the form of an abnormal grazing mode with huge amplitude and nearly tangential group velocity. This spectacular phenomenon is extremely sensitive to the frequency and direction of propagation of the incident plane wave. These features can be very attractive in numerous applications, such as higher harmonic generation and wave mixing, light amplification and lasing, highly efficient superprizms, etc.

  3. Tuning light matter interaction in magnetic nanofluid based field induced photonic crystal-glass structure by controlling optical path length

    E-Print Network [OSTI]

    Laskar, Junaid M; Philip, John

    2015-01-01

    The ability to control the light matter interaction and simultaneous tuning of both structural order and disorder in materials, although are important in photonics, but still remain as major challenges. In this paper, we show that optical path length dictates light-matter interaction in the same crystal structure formed by the ordering of magnetic nanoparticle self-assembled columns inside magnetic nanofluid under applied field. When the optical path length (L=80 {\\mu}m) is shorter than the optical (for wavelength, {\\lambda}=632.8 nm) coherence length inside the magnetic nanofluid under applied field, a Debye diffraction ring pattern is observed; while for longer path length (L=1mm), a corona ring of scattered light is observed. Analysis of Debye diffraction ring pattern suggests the formation of 3D hexagonal crystal structure, where the longitudinal and lateral inter-column spacings are 5.281 and 7.344 microns, respectively. Observation of speckles within the Debye diffraction pattern confirms the presence o...

  4. Covered Product Category: Exterior Lighting | Department of Energy

    Energy Savers [EERE]

    & Technologies Energy-Efficient Products Covered Product Category: Exterior Lighting Covered Product Category: Exterior Lighting The Federal Energy Management Program...

  5. Pittsburgh LED Street Lighting Research Project Performance Criteria

    Office of Energy Efficiency and Renewable Energy (EERE)

    A Pittsburgh LED Street Lighting Research Project document on Technical and Aesthetic Performance for Business District LED Lighting.

  6. REGISTRATION-CONNECTED LIGHTING SYSTEMS AND TECHNOLOGY DEVELOPMENT...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    REGISTRATION-CONNECTED LIGHTING SYSTEMS AND TECHNOLOGY DEVELOPMENT WORKSHOPS REGISTRATION-CONNECTED LIGHTING SYSTEMS AND TECHNOLOGY DEVELOPMENT WORKSHOPS REGISTRATIONCONNECTE...

  7. Energy consumption series: Lighting in commercial buildings

    SciTech Connect (OSTI)

    Not Available

    1992-03-11

    Lighting represents a substantial fraction of commercial electricity consumption. A wide range of initiatives in the Department of Energy`s (DOE) National Energy Strategy have focused on commercial lighting as a potential source of energy conservation. This report provides a statistical profile of commercial lighting, to examine the potential for lighting energy conservation in commercial buildings. The principal conclusion from this analysis is that energy use for lighting could be reduced by as much as a factor of four using currently available technology. The analysis is based primarily on the Energy Information Administration`s (EIA) 1986 Commercial Buildings Energy Consumption Survey (CBECS). The more recent 1989 survey had less detail on lighting, for budget reasons. While changes have occurred in the commercial building stock since 1986, the relationships identified by this analysis are expected to remain generally valid. In addition, the analytic approach developed here can be applied to the data that will be collected in the 1992 CBECS.

  8. Light emitting device having peripheral emissive region

    DOE Patents [OSTI]

    Forrest, Stephen R

    2013-05-28

    Light emitting devices are provided that include one or more OLEDs disposed only on a peripheral region of the substrate. An OLED may be disposed only on a peripheral region of a substantially transparent substrate and configured to emit light into the substrate. Another surface of the substrate may be roughened or include other features to outcouple light from the substrate. The edges of the substrate may be beveled and/or reflective. The area of the OLED(s) may be relatively small compared to the substrate surface area through which light is emitted from the device. One or more OLEDs also or alternatively may be disposed on an edge of the substrate about perpendicular to the surface of the substrate through which light is emitted, such that they emit light into the substrate. A mode expanding region may be included between each such OLED and the substrate.

  9. Photovoltaic module with light reflecting backskin

    DOE Patents [OSTI]

    Gonsiorawski, Ronald C. (Danvers, MA)

    2007-07-03

    A photovoltaic module comprises electrically interconnected and mutually spaced photovoltaic cells that are encapsulated by a light-transmitting encapsulant between a light-transparent front cover and a back cover, with the back cover sheet being an ionomer/nylon alloy embossed with V-shaped grooves running in at least two directions and coated with a light reflecting medium so as to provide light-reflecting facets that are aligned with the spaces between adjacent cells and oriented so as to reflect light falling in those spaces back toward said transparent front cover for further internal reflection onto the solar cells, whereby substantially all of the reflected light will be internally reflected from said cover sheet back to the photovoltaic cells, thereby increasing the current output of the module. The internal reflector improves power output by as much as 67%.

  10. Solid-state lighting technology perspective.

    SciTech Connect (OSTI)

    Tsao, Jeffrey Yeenien; Coltrin, Michael Elliott

    2006-08-01

    Solid-State Lighting (SSL) uses inorganic light-emitting diodes (LEDs) and organic light-emitting diodes (OLEDs) to convert electricity into light for illumination. SSL has the potential for enormous energy savings and accompanying environmental benefits if its promise of 50% (or greater) energy efficiencies can be achieved. This report provides a broad summary of the technologies that underlie SSL. The applications for SSL and potential impact on U.S. and world-wide energy consumption, and impact on the human visual experience are discussed. The properties of visible light and different technical metrics to characterize its properties are summarized. The many factors contributing to the capital and operating costs for SSL and traditional lighting sources (incandescent, fluorescent, and high-intensity discharge lamps) are discussed, with extrapolations for future SSL goals. The technologies underlying LEDs and OLEDs are also described, including current and possible alternative future technologies and some of the present limitations.

  11. Solid-State Lighting on a Shoestring Budget: The Economics of Off-Grid Lighting for Small Businesses in Kenya

    E-Print Network [OSTI]

    Radecsky, Kristen

    2009-01-01

    a preference for off-grid LED lighting products that wereowners were interested in LED lighting even if the operatingfor Off-Grid Lighting LED lighting is viewed increasingly as

  12. Wavefronts and Light Cones for Kerr Spacetimes

    E-Print Network [OSTI]

    Francisco Frutos-Alfaro; Frank Grave; Thomas Mueller; Daria Adis

    2014-12-27

    We investigate the light propagation by means of simulations of wavefronts and light cones for Kerr spacetimes. Simulations of this kind give us a new insight to better understand the light propagation in presence of massive rotating black holes. A relevant result is that wavefronts are back scattered with winding around the black hole. To generate these visualizations, an interactive computer program with a graphical user interface, called JWFront, was written in Java.

  13. Rare meson decays into very light neutralinos

    SciTech Connect (OSTI)

    O'Leary, Ben [Institut fuer Theoretische Physik, RWTH Aachen University, 52056 Aachen (Germany)

    2010-02-10

    Results are presented for the two-body decays of mesons into light neutralinos and from the first complete calculation of the loop-induced decays of kaons to pions plus light neutralinos and of B mesons to kaons plus light neutralinos. The branching ratios are shown to be strongly suppressed within the MSSM with minimal flavor violation, and no bounds on the neutralino mass can be inferred from experimental data, i.e. a massless neutralino is allowed.

  14. UV Light Curves of Thermonuclear Supernovae

    E-Print Network [OSTI]

    S. I. Blinnikov; E. I. Sorokina

    2000-03-17

    Ultraviolet light curves are calculated for several thermonuclear supernova models using a multifrequency radiation hydrodynamic code. It is found that Chandrasekhar-mass models produce very similar light curves both for detonation and deflagration. Sub-Chandrasekhar-mass models essentially differ from ``normal'' Chandrasekhar ones regarding behaviour of their UV fluxes. Differences in absolute brightness and in shape of light curves of thermonuclear supernovae could be detectable up to 300 Mpc with modern UV space telescopes.

  15. Light and Matter: Reading Messages from the Cosmos

    E-Print Network [OSTI]

    Crenshaw, Michael

    1 Chapter 5 Light and Matter: Reading Messages from the Cosmos How do we experience light? · The warmth of sunlight tells us that light is a form of energy · We can measure the amount of energy emitted ) Colors of Light · White light is made up of many different colors How do light and matter interact

  16. Update on light WIMP limits: LUX, lite and light

    SciTech Connect (OSTI)

    Nobile, Eugenio Del; Gelmini, Graciela B.; Huh, Ji-Haeng [Department of Physics and Astronomy, UCLA, 475 Portola Plaza, Los Angeles, CA 90095 (United States); Gondolo, Paolo, E-mail: delnobile@physics.ucla.edu, E-mail: gelmini@physics.ucla.edu, E-mail: paolo@physics.utah.edu, E-mail: jhhuh@physics.ucla.edu [Department of Physics and Astronomy, University of Utah, 115 South 1400 East #201, Salt Lake City, UT 84112 (United States)

    2014-03-01

    We reexamine the current direct dark matter data including the recent CDMSlite and LUX data, assuming that the dark matter consists of light WIMPs, with mass close to 10 GeV/c{sup 2} with spin-independent and isospin-conserving or isospin-violating interactions. We compare the data with a standard model for the dark halo of our galaxy and also in a halo-independent manner. In our standard-halo analysis, we find that for isospin-conserving couplings, CDMSlite and LUX together exclude the DAMA, CoGeNT, CDMS-II-Si, and CRESST-II possible WIMP signal regions. For isospin-violating couplings instead, we find that a substantial portion of the CDMS-II-Si region is compatible with all exclusion limits. In our halo-independent analysis, we find that for isospin-conserving couplings, the situation is of strong tension between the positive and negative results, as it was before the LUX and CDMSlite bounds, which turn out to exclude the same possible WIMP signals as previous limits. For isospin-violating couplings, we find that LUX and CDMS-II-Si bounds together exclude or severely constrain the DAMA, CoGeNT and CRESST-II possible WIMP signals.

  17. LED Street Lighting Conversion Workshop Presentations

    Broader source: Energy.gov [DOE]

    This page provides links to the presentations given at the National League of Cities Mobile Workshop, LED Street Lighting Conversion: Saving Your Community Money, While Improving Public Safety,...

  18. Pedernales Electric Cooperative- Commercial Lighting Rebate Program

    Broader source: Energy.gov [DOE]

    For existing and new commercial construction, Pedernales Electric Cooperative provides incentives for kW saved through efficient lighting. Rebates vary based upon whether construction is new or...

  19. Columbia Water & Light- Solar Energy Loans

    Office of Energy Efficiency and Renewable Energy (EERE)

    Columbia Water & Light (CWL) offers electric residential and commercial customers low-interest loans for photovoltaic (PV) systems and solar water heaters.

  20. Flathead Electric Cooperative- Commercial Lighting Rebate Program

    Broader source: Energy.gov [DOE]

    Flathead Electric Cooperative, in conjunction with Bonneville Power Administration, encourages energy efficiency in the commercial sector by providing a commercial lighting retro-fit rebate program...

  1. LIGHTING - Safer landings ... | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Airport runways could be highly visible under even the worst conditions with a lighting technology being developed by a team led by Oak Ridge National Laboratory. The...

  2. Cold Light from Hot Atoms and Molecules

    SciTech Connect (OSTI)

    Lister, Graeme [OSRAM SYLVANIA, CRSL, 71 Cherry Hill Drive, Beverly, MA (United States); Curry, John J. [National Institute of Standards and Technology, Gaithersburg, MD (United States)

    2011-05-11

    The introduction of rare earth atoms and molecules into lighting discharges led to great advances in efficacy of these lamps. Atoms such as Dy, Ho and Ce provide excellent radiation sources for lighting applications, with rich visible spectra, such that a suitable combination of these elements can provide high quality white light. Rare earth molecules have also proved important in enhancing the radiation spectrum from phosphors in fluorescent lamps. This paper reviews some of the current aspects of lighting research, particularly rare earth chemistry and radiation, and the associated fundamental atomic and molecular data.

  3. Hudson Light & Power- Photovoltaic Incentive Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    Hudson Light & Power Department, the municipal utility for the Town of Hudson, offers a limited number of solar photovoltaic (PV) rebates for residential, commercial, industrial, and municipal...

  4. POWER PURCHASE AGREEMENT DELMARVA POWER & LIGHT COMPANY

    E-Print Network [OSTI]

    Firestone, Jeremy

    POWER PURCHASE AGREEMENT between DELMARVA POWER & LIGHT COMPANY ("Buyer") and BLUEWATER WIND 3.5 Energy Forecasts, Scheduling and Balancing.......................................... 39 3

  5. Marblehead Municipal Light Department - Residential Energy Efficiency...

    Broader source: Energy.gov (indexed) [DOE]

    Administrator Marblehead Light Department Website http:www.marbleheadelectric.comindex.php?id146 State Massachusetts Program Type Rebate Program Rebate Amount...

  6. TAP Webinar: High Performance Outdoor Lighting Accelerator

    Broader source: Energy.gov [DOE]

    Hosted by the Technical Assistance Program (TAP), this webinar will cover the recently announced expansion of the Better Buildings platform —the High Performance Outdoor Lighting Accelerator (HPOLA).

  7. Residential lighting: Use and potential savings

    SciTech Connect (OSTI)

    1996-09-01

    The 1993 Residential Energy Consumption Survey (RECS) was the first to permit the estimation of annual kilowatt hours (kWh) used for lighting. The survey contained more detailed questions about the number of indoor lights used for specific amounts of time and more detailed questions about the use of outdoor lights than did previous surveys. In addition to these basic questions on the Household Questionnaire, the 1993 RECS also included a supplementary questionnaire, administered to a subset of households, that contained more detailed information about the types of lights used in the household, the rooms in which they were located, and the amount of time they were used.

  8. Energy & Sustainable Chemistry: Light Harvesting & Biocatalysis...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    & Sustainable Chemistry: Light Harvesting & Biocatalysis November 30, 1999 at http:www.rle.mit.eduexcitonicswp-contentuploads201408Olsen-efrc-video-highlight-artf.chloro..m...

  9. Advanced Technology Light Duty Diesel Aftertreatment System ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Passive Catalytic Approach to Low Temperature NOx Emission Abatement Cummins' Next Generation Tier 2, Bin 2 Light Truck Diesel Engine...

  10. Solid-State Lighting Technical Reports

    SciTech Connect (OSTI)

    None

    2011-12-16

    A page that contains links to technical reports of studies estimating the energy savings potential of solid-state lighting in numerous applications.

  11. A New Light on Disordered Ensembles

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A New Light on Disordered Ensembles Print Because individual biomolecules are very small, x-ray scattering experiments usually determine their structures by an analysis of...

  12. Light Induced Superconductivity | Stanford Synchrotron Radiation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Light Induced Superconductivity Wednesday, August 5, 2015 - 3:00pm SLAC, Redtail Hawk Conference Room 108A Speaker: Daniele Nicoletti, Max Planck Institute for the Structure and...

  13. Inland Power & Light Company - Agricultural Energy Efficiency...

    Broader source: Energy.gov (indexed) [DOE]

    70% or project cost Program Info Sector Name Utility Administrator Inland Power & Light Company Website http:www.inlandpower.comcustomercarec.php?id190 State Washington...

  14. Marblehead Municipal Light Department - Solar Rebate Program...

    Broader source: Energy.gov (indexed) [DOE]

    Rebates, subject to change. Program Info Sector Name Utility Administrator Marblehead Light Department Website http:www.marbleheadelectric.comindex.php?id166 Funding Source...

  15. Energy Savings Estimates of Light Emitting Diodes

    Broader source: Energy.gov [DOE]

    This report is an analysis of niche markets and applications for light emitting diodes (LEDs), undertaken on behalf of the U.S. Department of Energy

  16. Columbia Water & Light- Residential HVAC Rebates

    Broader source: Energy.gov [DOE]

    Columbia Water & Light (CWL) provides residential customers with rebates on energy efficient HVAC equipment. Customers should submit the mechanical permit from a Protective Inspection, a copy...

  17. Municipal Consortium LED Street Lighting Workshop Presentations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Boston, MA Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Boston, MA This page provides links to the presentations given at the DOE Municipal...

  18. Municipal Consortium LED Street Lighting Workshop Presentations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dallas, TX Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Dallas, TX This page provides links to the presentations given at the DOE Municipal...

  19. Mercuric iodide light detector and related method

    DOE Patents [OSTI]

    Iwanczyk, J.S.; Barton, J.B.; Dabrowski, A.J.; Schnepple, W.F.

    1986-09-23

    Apparatus and method for detecting light involve applying a substantially uniform electrical potential difference between first and second spaced surfaces of a body of mercuric iodide, exposing the first surface to light and measuring an electrical current passed through the body in response to the light. The mercuric iodide may be substantially monocrystalline and the potential may be applied between a substantially transparent conductive layer at the first surface and a second conductive layer at the second surface. In a preferred embodiment, the detector is coupled to a scintillator for passage of light to the mercuric iodide in response to ionizing radiation incident on the scintillator. 7 figs.

  20. Mercuric iodide light detector and related method

    DOE Patents [OSTI]

    Iwanczyk, Jan S. (Los Angeles, CA); Barton, Jeff B. (Los Angeles, CA); Dabrowski, Andrzej J. (Culver City, CA); Schnepple, Wayne F. (Santa Barbara, CA)

    1986-01-01

    Apparatus and method for detecting light involve applying a substantially uniform electrical potential difference between first and second spaced surfaces of a body of mercuric iodide, exposing the first surface to light and measuring an electrical current passed through the body in response to the light. The mercuric iodide may be substantially monocrystalline and the potential may be applied between a substantially transparent conductive layer at the first surface and a second conductive layer at the second surface. In a preferred embodiment, the detector is coupled to a scintillator for passage of light to the mercuric iodide in response to ionizing radiation incident on the scintillator.

  1. Connected Outdoor Lighting Systems For Municipalities

    Broader source: Energy.gov [DOE]

    This webinar is intended for municipal staff who have had some introduction to connected outdoor lighting systems, and want to further explore whether today's commercially available offerings suit...

  2. Springfield Utility Board- Commercial Lighting Incentive

    Broader source: Energy.gov [DOE]

    The Springfield Utility Board (SUB) offers rebates for a wide range of commercial and industrial lighting retrofits and new construction.

  3. Restoring Detroits Street Lighting System

    Energy Savers [EERE]

    once completed in 2016. Table ES.1. Annual savings a from Detroit street lighting transition Annual Energy Savings (kWh) Annual Electric Cost Savings () Annual...

  4. Lighting studies: interpreting lighting styles from traditional media in computer-generated imagery 

    E-Print Network [OSTI]

    Hong, Cindy Christine

    2002-01-01

    The goal of this research is to determine whether lighting styles from traditional media can be effectively interpreted in computer-generated scenes. Five paintings and a film still were carefully analyzed for their lighting styles, and scenes...

  5. Transformations in Lighting: The Ninth Annual Solid-State Lighting R&D Workshop

    Broader source: Energy.gov [DOE]

    Nearly 300 researchers, manufacturers, and other industry insiders and observers gathered in Atlanta January 31–February 2, 2012, to participate in DOE's "Transformations in Lighting" Solid-State Lighting (SSL) R&D Workshop.

  6. Transformations in Lighting: The Eighth Annual Solid-State Lighting R&D Workshop

    Office of Energy Efficiency and Renewable Energy (EERE)

    More than 350 researchers, manufacturers, and other industry insiders and observers gathered in San Diego February 1–3, 2011, to participate in DOE's "Transformations in Lighting" Solid-State Lighting (SSL) R&D Workshop.

  7. Demonstration Assessment of Light-Emitting Diode (LED) Residential Downlights and Undercabinet Lights

    SciTech Connect (OSTI)

    None

    2008-10-01

    This document is a report of observations and results obtained from a lighting demonstration project conducted under the U.S. Department of Energy (DOE) Solid-State Lighting (SSL) GATEWAY Demonstration Program.

  8. Demonstration Assessment of Light Emitting Diode (LED) Street Lighting, Phase III Continuation

    SciTech Connect (OSTI)

    None

    2008-11-01

    This report summarizes the third phase of an LED street lighting assessment project in Oakland, California, conducted to study the applicability of LED luminaires in a street lighting application.

  9. The journey of light : a rehabilitation center of inhabited light, NYC

    E-Print Network [OSTI]

    Louie, John Lai Yen

    1991-01-01

    The primary intention of this thesis is to explore the tectonic qualities of light throughCthe design of a building. In addition to addressing some of the more general questions concerning light raised in the design process, ...

  10. To build with light : an exploration into the relationship between light, space, and built form

    E-Print Network [OSTI]

    Heffron, Michael Thomas

    1989-01-01

    The purpose of this thesis is to look at how light works with form to generate space. The thesis attempts to deal with the physical reality that light, space and form exist in a symbiotic relationship. The thesis deals ...

  11. Creating effective computer generated scene lighting using traditional film lighting techniques 

    E-Print Network [OSTI]

    Garcia, Julie Marie

    2006-04-12

    This thesis explores the process of translating traditional cinematic lighting into the digital realm by understanding distinctly different lighting styles of three Directors of Photography. These Directors of Photography are Conrad Hall, Gregg...

  12. Experiential lighting : development and validation of perception-based lighting controls

    E-Print Network [OSTI]

    Aldrich, Matthew (Matthew Henry)

    2014-01-01

    Lighting, and its emergence as a digital and networked medium, represents an ideal platform for conducting research on both sensor and human-derived methods of control. Notably, solid-state lighting makes possible the ...

  13. DarkLight radiation backgrounds

    SciTech Connect (OSTI)

    Kalantarians, Narbe [University of Texas

    2013-11-01

    We report measurements of photon and neutron radiation levels observed while transmitting a 0.43 MW electron beam through millimeter-sized apertures and during beam-on, but accelerating gradient RF-on, operation. These measurements were conducted at the Free-Electron Laser (FEL) facility of the Jefferson National Accelerator Laboratory (JLab) using a 100 MeV electron beam from an energy-recovery linear accelerator. The beam was directed successively through 6 mm, 4 mm, and 2 mm diameter apertures of length 127 mm in aluminum at a maximum current of 4.3 mA (430 kW beam power). This study was conducted to characterize radiation levels for experiments that need to operate in this environment, such as the proposed DarkLight Experiment. We find that sustained transmission of a 430 kW CW beam through a 2 mm aperture is feasible with manageable beam-related backgrounds. We also find that during beam-off, RF-on operation, field emission inside the niobium cavities of the accelerator cryomodules is the primary source of ambient radiation.

  14. DarkLight radiation backgrounds

    SciTech Connect (OSTI)

    Kalantarians, N. [Department of Physics, Hampton University, Hampton VA 23668 (United States); Collaboration: DarkLight Collaboration

    2013-11-07

    We report measurements of photon and neutron radiation levels observed while transmitting a 0.43 MW electron beam through millimeter-sized apertures and during beam-on, but accelerating gradient RF-on, operation. These measurements were conducted at the Free-Electron Laser (FEL) facility of the Jefferson National Accelerator Laboratory (JLab) using a 100 MeV electron beam from an energy-recovery linear accelerator. The beam was directed successively through 6 mm, 4 mm, and 2 mm diameter apertures of length 127 mm in aluminum at a maximum current of 4.3 mA (430 kW beam power). This study was conducted to characterize radiation levels for experiments that need to operate in this environment, such as the proposed DarkLight Experiment. We find that sustained transmission of a 430 kW CW beam through a 2 mm aperture is feasible with manageable beam-related backgrounds. We also find that during beam-off, RF-on operation, field emission inside the niobium cavities of the accelerator cryomodules is the primary source of ambient radiation.

  15. Natural Supersymmetry without Light Higgsinos

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cohen, T. [Princeton Univ., Princeton NJ, (United States); Kearney, J. [Fermi National Accelerator Laboratory, Batavia, IL, (United States); Luty, M. A. [University of California Davis, Davis, CA (United States)

    2015-04-01

    We present a mechanism that allows a large Higgsino mass without large fine-tuning. The Higgs is a pseudo Nambu-Goldstone boson (PNGB) of the global symmetry breaking pattern $SO(5) \\to SO(4)$. Because of the PNGB nature of the light Higgs, the $SO(5)$ invariant Higgsino mass does not directly contribute to the Higgs mass. Large couplings in the Higgs sector that spontaneously breaks $SO(5)$ minimize the tuning, and are also motivated by the requirements of generating a sufficiently large Higgs quartic coupling and of maintaining a natural approximate global $SO(5)$ symmetry. When these conditions are imposed, theories of this type predict heavy Higgsinos. This construction differs from composite Higgs models in that no new particles are introduced to form complete $SO(5)$ multiplets involving the top quark---the stop is the only top partner. Compatibility with Higgs coupling measurements requires cancelations among contributions to the Higgs mass squared parameter at the 10% level. An important implication of this construction is that the compressed region of stop and sbottom searches can still be natural.

  16. Natural Supersymmetry without Light Higgsinos

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cohen, T.; Kearney, J.; Luty, M. A.

    2015-04-01

    We present a mechanism that allows a large Higgsino mass without large fine-tuning. The Higgs is a pseudo Nambu-Goldstone boson (PNGB) of the global symmetry breaking pattern $SO(5) \\to SO(4)$. Because of the PNGB nature of the light Higgs, the $SO(5)$ invariant Higgsino mass does not directly contribute to the Higgs mass. Large couplings in the Higgs sector that spontaneously breaks $SO(5)$ minimize the tuning, and are also motivated by the requirements of generating a sufficiently large Higgs quartic coupling and of maintaining a natural approximate global $SO(5)$ symmetry. When these conditions are imposed, theories of this type predict heavymore »Higgsinos. This construction differs from composite Higgs models in that no new particles are introduced to form complete $SO(5)$ multiplets involving the top quark---the stop is the only top partner. Compatibility with Higgs coupling measurements requires cancelations among contributions to the Higgs mass squared parameter at the 10% level. An important implication of this construction is that the compressed region of stop and sbottom searches can still be natural.« less

  17. Demonstration Assessment of Light-Emitting Diode (LED) Parking Lot Lighting, Phase I

    SciTech Connect (OSTI)

    Myer, M. A.; Goettel, R. T.

    2010-06-22

    U.S. DOE Solid-State Lighting Technology Demonstration GATEWAY Program Report on the TJMaxx Demonstration.

  18. The Magnetic Structure of Light Nuclei from Lattice QCD

    E-Print Network [OSTI]

    Emmanuel Chang; William Detmold; Kostas Orginos; Assumpta Parreno; Martin J. Savage; Brian C. Tiburzi; Silas R. Beane

    2015-06-17

    Lattice QCD with background magnetic fields is used to calculate the magnetic moments and magnetic polarizabilities of the nucleons and of light nuclei with $A\\le4$, along with the cross-section for the $M1$ transition $np\\rightarrow d\\gamma$, at the flavor SU(3)-symmetric point where the pion mass is $m_\\pi\\sim 806$ MeV. These magnetic properties are extracted from nucleon and nuclear energies in six uniform magnetic fields of varying strengths. The magnetic moments are presented in a recent Letter. For the charged states, the extraction of the polarizability requires careful treatment of Landau levels, which enter non-trivially in the method that is employed. The nucleon polarizabilities are found to be of similar magnitude to their physical values, with $\\beta_p=5.22(+0.66/-0.45)(0.23) \\times 10^{-4}$ fm$^3$ and $\\beta_n=1.253(+0.056/-0.067)(0.055) \\times 10^{-4}$ fm$^3$, exhibiting a significant isovector component. The dineutron is bound at these heavy quark masses and its magnetic polarizability, $\\beta_{nn}=1.872(+0.121/-0.113)(0.082) \\times 10^{-4}$ fm$^3$ differs significantly from twice that of the neutron. A linear combination of deuteron scalar and tensor polarizabilities is determined by the energies of the $j_z=\\pm 1$ deuteron states, and is found to be $\\beta_{d,\\pm 1}=4.4(+1.6/-1.5)(0.2) \\times 10^{-4}$ fm$^3$. The magnetic polarizabilities of the three-nucleon and four-nucleon systems are found to be positive and similar in size to those of the proton, $\\beta_{^{3}\\rm He}=5.4(+2.2/-2.1)(0.2) \\times 10^{-4}$ fm$^3$, $\\beta_{^{3}\\rm H}=2.6(1.7)(0.1) \\times 10^{-4}$ fm$^3$, $\\beta_{^{4}\\rm He}=3.4(+2.0/-1.9)(0.2) \\times 10^{-4}$ fm$^3$. Mixing between the $j_z=0$ deuteron state and the spin-singlet $np$ state induced by the background magnetic field is used to extract the short-distance two-nucleon counterterm, ${\\bar L}_1$, of the pionless effective theory for $NN$ systems (equivalent to the meson-exchange current contribution in nuclear potential models), that dictates the cross-section for the $np\\to d\\gamma$ process near threshold. Combined with previous determinations of NN scattering parameters, this enables an ab initio determination of the threshold cross-section at these unphysical masses.

  19. Magnetic structure of light nuclei from lattice QCD

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chang, Emmanuel; Detmold, William; Orginos, Kostas; Parreño, Assumpta; Savage, Martin J.; Tiburzi, Brian C.; Beane, Silas R.

    2015-12-09

    Lattice QCD with background magnetic fields is used to calculate the magnetic moments and magnetic polarizabilities of the nucleons and of light nuclei with $A\\le4$, along with the cross-section for the $M1$ transition $np\\rightarrow d\\gamma$, at the flavor SU(3)-symmetric point where the pion mass is $m_\\pi\\sim 806$ MeV. These magnetic properties are extracted from nucleon and nuclear energies in six uniform magnetic fields of varying strengths. The magnetic moments are presented in a recent Letter. For the charged states, the extraction of the polarizability requires careful treatment of Landau levels, which enter non-trivially in the method that is employed. Themore »nucleon polarizabilities are found to be of similar magnitude to their physical values, with $\\beta_p=5.22(+0.66/-0.45)(0.23) \\times 10^{-4}$ fm$^3$ and $\\beta_n=1.253(+0.056/-0.067)(0.055) \\times 10^{-4}$ fm$^3$, exhibiting a significant isovector component. The dineutron is bound at these heavy quark masses and its magnetic polarizability, $\\beta_{nn}=1.872(+0.121/-0.113)(0.082) \\times 10^{-4}$ fm$^3$ differs significantly from twice that of the neutron. A linear combination of deuteron scalar and tensor polarizabilities is determined by the energies of the $j_z=\\pm 1$ deuteron states, and is found to be $\\beta_{d,\\pm 1}=4.4(+1.6/-1.5)(0.2) \\times 10^{-4}$ fm$^3$. The magnetic polarizabilities of the three-nucleon and four-nucleon systems are found to be positive and similar in size to those of the proton, $\\beta_{^{3}\\rm He}=5.4(+2.2/-2.1)(0.2) \\times 10^{-4}$ fm$^3$, $\\beta_{^{3}\\rm H}=2.6(1.7)(0.1) \\times 10^{-4}$ fm$^3$, $\\beta_{^{4}\\rm He}=3.4(+2.0/-1.9)(0.2) \\times 10^{-4}$ fm$^3$. Mixing between the $j_z=0$ deuteron state and the spin-singlet $np$ state induced by the background magnetic field is used to extract the short-distance two-nucleon counterterm, ${\\bar L}_1$, of the pionless effective theory for $NN$ systems (equivalent to the meson-exchange current contribution in nuclear potential models), that dictates the cross-section for the $np\\to d\\gamma$ process near threshold. Thus, combined with previous determinations of NN scattering parameters, this enables an ab initio determination of the threshold cross-section at these unphysical masses.« less

  20. Magnetic structure of light nuclei from lattice QCD

    SciTech Connect (OSTI)

    Chang, Emmanuel; Detmold, William; Orginos, Kostas; Parreño, Assumpta; Savage, Martin J.; Tiburzi, Brian C.; Beane, Silas R.

    2015-12-09

    Lattice QCD with background magnetic fields is used to calculate the magnetic moments and magnetic polarizabilities of the nucleons and of light nuclei with $A\\le4$, along with the cross-section for the $M1$ transition $np\\rightarrow d\\gamma$, at the flavor SU(3)-symmetric point where the pion mass is $m_\\pi\\sim 806$ MeV. These magnetic properties are extracted from nucleon and nuclear energies in six uniform magnetic fields of varying strengths. The magnetic moments are presented in a recent Letter. For the charged states, the extraction of the polarizability requires careful treatment of Landau levels, which enter non-trivially in the method that is employed. The nucleon polarizabilities are found to be of similar magnitude to their physical values, with $\\beta_p=5.22(+0.66/-0.45)(0.23) \\times 10^{-4}$ fm$^3$ and $\\beta_n=1.253(+0.056/-0.067)(0.055) \\times 10^{-4}$ fm$^3$, exhibiting a significant isovector component. The dineutron is bound at these heavy quark masses and its magnetic polarizability, $\\beta_{nn}=1.872(+0.121/-0.113)(0.082) \\times 10^{-4}$ fm$^3$ differs significantly from twice that of the neutron. A linear combination of deuteron scalar and tensor polarizabilities is determined by the energies of the $j_z=\\pm 1$ deuteron states, and is found to be $\\beta_{d,\\pm 1}=4.4(+1.6/-1.5)(0.2) \\times 10^{-4}$ fm$^3$. The magnetic polarizabilities of the three-nucleon and four-nucleon systems are found to be positive and similar in size to those of the proton, $\\beta_{^{3}\\rm He}=5.4(+2.2/-2.1)(0.2) \\times 10^{-4}$ fm$^3$, $\\beta_{^{3}\\rm H}=2.6(1.7)(0.1) \\times 10^{-4}$ fm$^3$, $\\beta_{^{4}\\rm He}=3.4(+2.0/-1.9)(0.2) \\times 10^{-4}$ fm$^3$. Mixing between the $j_z=0$ deuteron state and the spin-singlet $np$ state induced by the background magnetic field is used to extract the short-distance two-nucleon counterterm, ${\\bar L}_1$, of the pionless effective theory for $NN$ systems (equivalent to the meson-exchange current contribution in nuclear potential models), that dictates the cross-section for the $np\\to d\\gamma$ process near threshold. Thus, combined with previous determinations of NN scattering parameters, this enables an ab initio determination of the threshold cross-section at these unphysical masses.

  1. GE Lighting Solutions: Order (2013-SE-4901)

    Broader source: Energy.gov [DOE]

    DOE ordered General Electric Lighting Solutions, LLC to pay a $5,360 civil penalty after finding GE Lighting Solutions had manufactured and distributed in commerce in the U.S. 30 units of basic model DR4-RTFB-23B and 177 units (of which 85 units remain in inventory) of basic model DR4-RTFB-77A-002, noncompliant traffic signal modules.

  2. Visual Perception Light and the Visual Apparatus

    E-Print Network [OSTI]

    Mignotte, Max

    #12;293 Vision and Visual Perception Light and the Visual Apparatus The Visible Spectrum The Eye. was in his car when it was hit by a small truck. In the emergency room, he was told that he had a concussion are providing a valuable model for understanding complex neural processing in general. Light and the Visual

  3. Low Light Image Enhancement via Sparse Representations

    E-Print Network [OSTI]

    Tsakalides, Panagiotis

    Low Light Image Enhancement via Sparse Representations Konstantina Fotiadou , Grigorios,greg,tsakalid}@ics.forth.gr Abstract. Enhancing the quality of low light images is a critical pro- cessing function both from images captured under low illumination conditions based on the mathematical framework of Sparse

  4. Chapter 21: Residential Lighting Evaluation Protocol

    SciTech Connect (OSTI)

    Dimetrosky, S.; Parkinson, K.; Lieb, N.

    2015-02-01

    In recent years, residential lighting has represented a significant share of ratepayer-funded energy-efficiency electricity savings. Utilities have achieved the majority of these savings by promoting the purchase and installation of compact fluorescent lamps (CFLs), both standard 'twister' bulbs and specialty CFLs such as reflectors, A-Lamps, globes, and dimmable lights.

  5. Microwave-driven ultraviolet light sources

    DOE Patents [OSTI]

    Manos, Dennis M. (Williamsburg, VA); Diggs, Jessie (Norfolk, VA); Ametepe, Joseph D. (Roanoke, VA)

    2002-01-29

    A microwave-driven ultraviolet (UV) light source is provided. The light source comprises an over-moded microwave cavity having at least one discharge bulb disposed within the microwave cavity. At least one magnetron probe is coupled directly to the microwave cavity.

  6. CALiPER Snapshot Report: Light Bulbs

    SciTech Connect (OSTI)

    2013-10-01

    Snapshot reports use data from DOE's LED Lighting Facts product list to compare the LED performance to standard technologies, and are designed to help lighting retailers, distributors, designers, utilities, energy efficiency program sponsors, and other stakeholders understand the current state of the LED market and its trajectory.

  7. Smart Lighting ERC Industrial Speaker Series

    E-Print Network [OSTI]

    Varela, Carlos

    . About Crystal IS Crystal IS Inc. is the world leading manufacturer of ultraviolet light emitting diodes on native AlN high-quality substrates. These layers are fabricated into mid- ultraviolet light emitting diodes with peak wavelengths in the range of 240-275 nm. The low threading dislocation density

  8. Hybrid solar lighting distribution systems and components

    DOE Patents [OSTI]

    Muhs, Jeffrey D. (Lenoir City, TN); Earl, Dennis D. (Knoxville, TN); Beshears, David L. (Knoxville, TN); Maxey, Lonnie C. (Powell, TN); Jordan, John K. (Oak Ridge, TN); Lind, Randall F. (Lenoir City, TN)

    2011-07-05

    A hybrid solar lighting distribution system and components having at least one hybrid solar concentrator, at least one fiber receiver, at least one hybrid luminaire, and a light distribution system operably connected to each hybrid solar concentrator and each hybrid luminaire. A controller operates all components.

  9. Fiber optic probe for light scattering measurements

    DOE Patents [OSTI]

    Nave, Stanley E. (Evans, GA); Livingston, Ronald R. (Aiken, SC); Prather, William S. (Augusta, GA)

    1995-01-01

    A fiber optic probe and a method for using the probe for light scattering analyses of a sample. The probe includes a probe body with an inlet for admitting a sample into an interior sample chamber, a first optical fiber for transmitting light from a source into the chamber, and a second optical fiber for transmitting light to a detector such as a spectrophotometer. The interior surface of the probe carries a coating that substantially prevents non-scattered light from reaching the second fiber. The probe is placed in a region where the presence and concentration of an analyte of interest are to be detected, and a sample is admitted into the chamber. Exciting light is transmitted into the sample chamber by the first fiber, where the light interacts with the sample to produce Raman-scattered light. At least some of the Raman-scattered light is received by the second fiber and transmitted to the detector for analysis. Two Raman spectra are measured, at different pressures. The first spectrum is subtracted from the second to remove background effects, and the resulting sample Raman spectrum is compared to a set of stored library spectra to determine the presence and concentration of the analyte.

  10. The LIPSS search for light neutral bosons

    SciTech Connect (OSTI)

    Andrei Afanasev; Oliver K. Baker; Kevin Beard; George Biallas; James Boyce; Minarni Minarni; Roopchan Ramdon; Michelle D. Shinn; Penny Slocum

    2009-07-01

    An overview is presented of the LIPSS experimental search for very light neutral bosons using laser light from Jefferson Lab's Free Electron Laser. This facility provides very high power beams of photons over a large optical range, particularly at infrared wavelengths. Data has been collected in several experimental runs during the course of the past three years, most recently in the Fall of 2009.

  11. Light production metrics of radiation sources

    E-Print Network [OSTI]

    C. Tannous

    2013-11-14

    Light production by a radiation source is evaluated and reviewed as an important concept of physics from the Black-Body point of view. The mechanical equivalent of the lumen, the unit of perceived light, is explained and evaluated using radiation physics arguments. The existence of an upper limit of luminous efficacy is illustrated for various sources and implications are highlighted.

  12. Fiber optic probe for light scattering measurements

    DOE Patents [OSTI]

    Nave, S.E.; Livingston, R.R.; Prather, W.S.

    1993-01-01

    This invention is comprised of a fiber optic probe and a method for using the probe for light scattering analyses of a sample. The probe includes a probe body with an inlet for admitting a sample into an interior sample chamber, a first optical fiber for transmitting light from a source into the chamber, and a second optical fiber for transmitting light to a detector such as a spectrophotometer. The interior surface of the probe carries a coating that substantially prevents non-scattered light from reaching the second fiber. The probe is placed in a region where the presence and concentration of an analyte of interest are to be detected, and a sample is admitted into the chamber. Exciting light is transmitted into the sample chamber by the first fiber, where the light interacts with the sample to produce Raman-scattered light. At least some of the Raman- scattered light is received by the second fiber and transmitted to the detector for analysis. Two Raman spectra are measured, at different pressures. The first spectrum is subtracted from the second to remove background effects, and the resulting sample Raman spectrum is compared to a set of stored library spectra to determine the presence and concentration of the analyte.

  13. Demand Responsive Lighting: A Scoping Study

    E-Print Network [OSTI]

    LBNL-62226 Demand Responsive Lighting: A Scoping Study F. Rubinstein, S. Kiliccote Energy Environmental Technologies Division January 2007 #12;LBNL-62226 Demand Responsive Lighting: A Scoping Study in this report was coordinated by the Demand Response Research Center and funded by the California Energy

  14. Hybrid solar lighting systems and components

    DOE Patents [OSTI]

    Muhs, Jeffrey D. (Lenoir City, TN); Earl, Dennis D. (Knoxville, TN); Beshears, David L. (Knoxville, TN); Maxey, Lonnie C. (Powell, TN); Jordan, John K. (Oak Ridge, TN); Lind, Randall F. (Lenoir City, TN)

    2007-06-12

    A hybrid solar lighting system and components having at least one hybrid solar concentrator, at least one fiber receiver, at least one hybrid luminaire, and a light distribution system operably connected to each hybrid solar concentrator and each hybrid luminaire. A controller operates each component.

  15. Light-Cone Distribution Amplitudes for the Light $1^1P_1$ Mesons

    E-Print Network [OSTI]

    Kwei-Chou Yang

    2005-10-27

    We present a study of light-cone distribution amplitudes of the light $1^1P_1$ mesons. The first few Gegenbauer moments of leading twist light-cone distribution amplitudes are calculated by using the QCD sum rule technique.

  16. Proposal -Interactive City Lighting LED based lighting systems have enabled radically new

    E-Print Network [OSTI]

    Proposal - Interactive City Lighting Abstract LED based lighting systems have also be integrated with sensors and smart environments. This has opened up a new world. The use of the LED as a potential means for providing interactive city lighting for social

  17. Ascofuranone stimulates expression of adiponectin and peroxisome proliferator activated receptor through the modulation of mitogen activated protein kinase family members in 3T3-L1, murine pre-adipocyte cell line

    SciTech Connect (OSTI)

    Chang, Young-Chae, E-mail: ycchang@cu.ac.kr [Research Institute of Biomedical Engineering and Department of Medicine, Catholic University of Daegu School of Medicine, Daegu 705-718 (Korea, Republic of)] [Research Institute of Biomedical Engineering and Department of Medicine, Catholic University of Daegu School of Medicine, Daegu 705-718 (Korea, Republic of); Cho, Hyun-Ji, E-mail: hjcho.dr@gmail.com [Research Institute of Biomedical Engineering and Department of Medicine, Catholic University of Daegu School of Medicine, Daegu 705-718 (Korea, Republic of)] [Research Institute of Biomedical Engineering and Department of Medicine, Catholic University of Daegu School of Medicine, Daegu 705-718 (Korea, Republic of)

    2012-06-08

    Highlights: Black-Right-Pointing-Pointer Ascofuranone increases expression of adiponectin and PPAR{gamma}. Black-Right-Pointing-Pointer Inhibitors for MEK and JNK increased the expression of adiponectin and PPAR{gamma}. Black-Right-Pointing-Pointer Ascofuranone significantly suppressed phosho-ERK, while increasing phospho-p38. -- Abstract: Ascofuranone, an isoprenoid antibiotic, was originally isolated as a hypolipidemic substance from a culture broth of the phytopathogenic fungus, Ascochyta visiae. Adiponectin is mainly synthesized by adipocytes. It relieves insulin resistance by decreasing the plasma triglycerides and improving glucose uptake, and has anti-atherogenic properties. Here, we found that ascofuranone increases expression of adiponectin and PPAR{gamma}, a major transcription factor for adiponectin, in 3T3-L1, murine pre-adipocytes cell line, without promoting accumulation of lipid droplets. Ascofuranone induced expression of adiponectin, and increases the promoter activity of adiponectin and PPRE, PPAR response element, as comparably as a PPAR{gamma} agonist, rosiglitazone, that stimulates lipid accumulation in the preadipocyte cell line. Moreover, inhibitors for MEK and JNK, like ascofuranone, considerably increased the expression of adiponectin and PPAR{gamma}, while a p38 inhibitor significantly suppressed. Ascofuranone significantly suppressed ERK phosphorylation, while increasing p38 phosphorylation, during adipocyte differentiation program. These results suggest that ascofuranone regulates the expression of adiponectin and PPAR{gamma} through the modulation of MAP kinase family members.

  18. Nonclassical Light from Semiconductor Quantum Wells

    E-Print Network [OSTI]

    P. Grünwald; W. Vogel

    2014-05-06

    The fluorescence light from semiconductor quantum wells is analyzed with respect to its quantum optical properties. The light emitted by the excitons is described by bosonic excitations with a Kerr-type nonlinear interaction. To create the excitons, the incoming pump laser light is absorbed and the absorption acts as a spectral filter for the emitted light. The quantum properties of the emitted light are analyzed for the bare excitonic and the quantum-well systems. Squeezing of the quantum-well fluorescence persists for higher pump laser powers than the squeezing of the excitonic fluorescence. For strong pumping, the nonlinearity suppresses the creation of photon pairs and the photon statistics becomes sub-Poisson.

  19. Light front distribution of the chiral condensate

    E-Print Network [OSTI]

    Lei Chang; Craig D. Roberts; Sebastian M. Schmidt

    2013-09-19

    The pseudoscalar projection of the pion's Poincare'-covariant Bethe-Salpeter amplitude onto the light-front may be understood to provide the probability distribution of the chiral condensate within the pion. Unlike the parton distribution amplitudes usually considered and as befitting a collective effect, this condensate distribution receives contributions from all Fock space components of the pion's light-front wave-function. We compute this condensate distribution using the Dyson-Schwinger equation (DSE) framework and show the result to be a model-independent feature of quantum chromodynamics (QCD). Our analysis establishes that this condensate is concentrated in the neighbourhood of the boundaries of the distribution's domain of support. It thereby confirms the dominant role played by many-particle Fock states within the pion's light-front wave function in generating the chiral condensate on the light-front and verifies that light-front longitudinal zero modes do not play a material role in that process.

  20. LIGHT CURVES OF 32 LARGE TRANSNEPTUNIAN OBJECTS

    SciTech Connect (OSTI)

    Benecchi, Susan D.; Sheppard, Scott S.

    2013-05-15

    We present observations of 32 primarily bright, newly discovered Transneptunian objects (TNOs) observable from the Southern Hemisphere during 39 nights of observation with the Irenee du Pont 2.5 m telescope at Las Campanas Observatory. Our dataset includes objects in all dynamical classes, but is weighted toward scattered objects. We find 15 objects for which we can fit periods and amplitudes to the data, and place light curve amplitude upper limits on the other 17 objects. Combining our sample with the larger light curve sample in the literature, we find a 3{sigma} correlation between light curve amplitude and absolute magnitude with fainter objects having larger light curve amplitudes. We looked for correlations between light curve and individual orbital properties, but did not find any statistically significant results. However, if we consider light curve properties with respect to object dynamical classification, we find statistically different distributions between the classical-scattered and classical-resonant populations at the 95.60% and 94.64% level, respectively, with the classical objects having larger amplitude light curves. The significance is 97.05% if the scattered and resonant populations are combined. The properties of binary light curves are largely consistent with the greater TNO population except in the case of tidally locked systems. All the Haumea family objects measured so far have light curve amplitudes and rotation periods {<=}10 hr, suggesting that they are not significantly different from the larger TNO population. We expect multiple factors are influencing object rotations: object size dominates light curve properties except in the case of tidal, or proportionally large collisional interactions with other TNOs, the influence of the latter being different for each TNO sub-population. We also present phase curves and colors for some of our objects.