Powered by Deep Web Technologies
Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Qualitatitive description : light in the urban environment  

E-Print Network [OSTI]

The quality of our built environment is difficult to describe and to regulate; using light as an example, this thesis develops a descriptive framework using elementary, dynamic and connective forms. The combination of these ...

Stuebing, Susan

1986-01-01T23:59:59.000Z

2

SCE Classroom Lighting Guidelines 38 September 2004 Design Description  

E-Print Network [OSTI]

SCE Classroom Lighting Guidelines 38 September 2004 EXAMPLE 1 Design Description In this design, the ambient lighting system uses two, twenty foot of semi-indirect luminaires that are suspended in 2 rows electronic ballasts. The whiteboard task light is a linear wallwasher about 12 feet long that uses (3) Super

3

On relation between rest frame and light-front descriptions of quarkonium  

E-Print Network [OSTI]

In this paper we study the relation between the light-front (infinite momentum) and rest-frame descriptions of quarkonia. While the former is more convenient for high-energy production, the latter is usually used for the evaluation of charmonium properties. In particular, we discuss the dynamics of a relativistically moving system with nonrelativistic internal motion and give relations between rest frame and light-front potentials used for the description of quarkonium states. We consider two approximations, first the small coupling regime, and next the nonperturbative small binding energy approximation. In both cases we get consistent results. Our results could be relevant for the description of final state interactions in a wide class of processes, including quarkonium production on nuclei and plasma. Moreover, they can be extended to the description of final state interactions in the production of weakly bound systems, such as for example the deuteron.

B. Z. Kopeliovich; E. Levin; Ivan Schmidt; M. Siddikov

2015-01-07T23:59:59.000Z

4

On relation between rest frame and light-front descriptions of quarkonium  

E-Print Network [OSTI]

In this paper we study the relation between the light-front (infinite momentum) and rest-frame descriptions of quarkonia. While the former is more convenient for high-energy production, the latter is usually used for the evaluation of charmonium properties. In particular, we discuss the dynamics of a relativistically moving system with nonrelativistic internal motion and give relations between rest frame and light-front potentials used for the description of quarkonium states. We consider two approximations, first the small coupling regime, and next the nonperturbative small binding energy approximation. In both cases we get consistent results. Our results could be relevant for the description of final state interactions in a wide class of processes, including quarkonium production on nuclei and plasma. Moreover, they can be extended to the description of final state interactions in the production of weakly bound systems, such as for example the deuteron.

Kopeliovich, B Z; Schmidt, Ivan; Siddikov, M

2015-01-01T23:59:59.000Z

5

Universality of electron distributions in high-energy air showers - description of Cherenkov light production  

E-Print Network [OSTI]

The shower simulation code CORSIKA has been used to investigate the electron energy and angular distributions in high-energy showers. Based on the universality of both distributions, we develop an analytical description of Cherenkov light emission in extensive air showers, which provides the total number and angular distribution of photons. The parameterisation can be used e.g. to calculate the contribution of direct and scattered Cherenkov light to shower profiles measured with the air fluorescence technique.

F. Nerling; J. BlŁmer; R. Engel; M. Risse

2005-12-22T23:59:59.000Z

6

Description  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phasesData FilesShape, Density, and Morphologyusing TD-DFT. |Description

7

Magnet pole tips  

DOE Patents [OSTI]

An improved magnet more easily provides a radially increasing magnetic field, as well as reduced fringe field and requires less power for a given field intensity. The subject invention comprises a pair of spaced, opposed magnetic poles which further comprise a pair of pole roots, each having a pole tip attached to its center. The pole tips define the gap between the magnetic poles and at least a portion of each pole tip is separated from its associated pole root. The separation begins at a predetermined distance from the center of the pole root and increases with increasing radial distance while being constant with azimuth within that portion. Magnets in accordance with the subject invention have been found to be particularly advantageous for use in large isochronous cyclotrons.

Thorn, C.E.; Chasman, C.; Baltz, A.J.

1981-11-19T23:59:59.000Z

8

Light beams with general direction and polarization: global description and geometric phase  

E-Print Network [OSTI]

We construct the manifold describing the family of plane monochromatic light waves with all directions, polarizations, phases and intensities. A smooth description of polarization, valid over the entire sphere S^2 of directions, is given through the construction of an orthogonal basis pair of complex polarization vectors for each direction; any light beam is then uniquely and smoothly specified by giving its direction and two complex amplitudes. This implies that the space of all light beams is the six dimensional manifold S^2 X C^2, the Cartesian product of a sphere and a two dimensional complex vector space. A Hopf map (i.e mapping the two complex amplitudes to the Stokes parameters) then leads to the four dimensional manifold S^2 X S^2 which describes beams with all directions and polarization states. This product of two spheres can be viewed as an ordered pair of two points on a single sphere, in contrast to earlier work in which the same system was represented using Majorana's mapping of the states of a spin one quantum system to an unordered pair of points on a sphere. This is a different manifold, CP^2, two dimensional complex projective space, which does not faithfully represent the full space of all directions and polarizations. Following the now-standard framework, we exhibit the fibre bundle whose total space is the set of all light beams of non-zero intensity, and base space S^2 X S^2. We give the U(1) connection which determines the geometric phase as the line integral of a one-form along a closed curve in the total space. Bases are classified as globally smooth, global but singular, and local, with the last type of basis being defined only when the curve traversed by the system is given. Existing as well as new formulae for the geometric phase are presented in this overall framework.

R. Nityananda; S. Sridhar

2012-12-05T23:59:59.000Z

9

Pole pulling apparatus and method  

DOE Patents [OSTI]

An apparatus for removal of embedded utility-type poles which removes the poles quickly and efficiently from their embedded position without damage to the pole or surrounding structures. The apparatus includes at least 2 piston/cylinder members equally spaced about the pole, and a head member affixed to the top of each piston. Elongation of the piston induces rotation of the head into the pole to increase the gripping action and reduce slippage. Repeated actuation and retraction of the piston and head member will "jack" the pole from its embedded position.

McIntire, Gary L. (12 Honeybee La., Idaho Falls, ID 83402)

1989-01-01T23:59:59.000Z

10

Single phase two pole/six pole motor  

DOE Patents [OSTI]

A single phase alternating current two pole/six pole motor is provided with a main stator winding having six coils disposed unequally around the periphery of the machine. These coils are divided into two groups. When these groups are connected such that their magnetomotive forces are additive, two pole motor operation results. When the polarity of one of the groups is then reversed, six pole motor operation results. An auxiliary stator winding which is similar to the main stator winding is displaced from the main stator winding by 90 electrical degrees on a two pole basis.

Kirschbaum, Herbert S. (Asheville, NC)

1984-01-01T23:59:59.000Z

11

Single phase two pole/six pole motor  

DOE Patents [OSTI]

A single phase alternating current two pole/six pole motor is provided with a main stator winding having six coils disposed unequally around the periphery of the machine. These coils are divided into two groups. When these groups are connected such that their magnetomotive forces are additive, two pole motor operation results. When the polarity of one of the groups is then reversed, six pole motor operation results. An auxiliary stator winding which is similar to the main stator winding is displaced from the main stator winding by 90 electrical degrees on a two pole basis. 12 figs.

Kirschbaum, H.S.

1984-09-25T23:59:59.000Z

12

Central-moment description of polarization for quantum states of light  

E-Print Network [OSTI]

We present a moment expansion method for the systematic characterization of the polarization properties of quantum states of light. Specifically, we link the method to the measurements of the Stokes operator in different directions on the Poincar\\'{e} sphere, and provide a method of polarization tomography without resorting to full state tomography. We apply these ideas to the experimental first- and second-order polarization characterization of some two-photon quantum states. In addition, we show that there are classes of states whose polarization characteristics are dominated not by their first-order moments (i.e., the Stokes vector) but by higher-order polarization moments.

G. BjŲrk; J. SŲderholm; Y. -S. Kim; Y. -S. Ra; H. -T. Lim; C. Kothe; Y. -H. Kim; L. L. SŠnchez-Soto; A. B. Klimov

2012-01-19T23:59:59.000Z

13

Lightweight extendable and retractable pole  

DOE Patents [OSTI]

A lightweight extendable and retractable telescopic pole is disclosed comprising a plurality of non-metallic telescoping cylinders with sliding and sealing surfaces between the cylinders, a first plug member on the upper end of the smallest cylinder, and a second plug member on the lower end of the largest cylinder, whereby fluid pressure admitted to the largest cylinder will cause the telescoping cylinders to slide relative to one another causing the pole to extend. An elastomeric member connects the first plug member with one of the intermediate cylinders to urge the cylinders back into a collapsed position when the fluid pressure in the cylinders is vented. Annular elastomer members are provided which seal one cylinder to another when the pole is fully extended and further serve to provide a cushion to prevent damage to the cylinders when the pole is urged back into its retractable position by the elastomeric members and the venting of the pressure. A value mechanism associated with the pole is provided to admit a fluid under pressure to the interior of the telescoping cylinders of the pole while pressurizing a pressure relief port having an opening larger than the inlet port in a closed position whereby removal of the pressure on the relief port will cause the relief port to open to quickly lower the pressure in the interior of the telescoping cylinders to thereby assist in the rapid retraction of the extended pole.

Warren, John L. (Santa Barbara, CA); Brandt, James E. (Santa Barbara, CA)

1994-01-01T23:59:59.000Z

14

Lightweight extendable and retractable pole  

DOE Patents [OSTI]

A lightweight extendable and retractable telescopic pole is disclosed comprising a plurality of non-metallic telescoping cylinders with sliding and sealing surfaces between the cylinders, a first plug member on the upper end of the smallest cylinder, and a second plug member on the lower end of the largest cylinder, whereby fluid pressure admitted to the largest cylinder will cause the telescoping cylinders to slide relative to one another causing the pole to extend. An elastomeric member connects the first plug member with one of the intermediate cylinders to urge the cylinders back into a collapsed position when the fluid pressure in the cylinders is vented. Annular elastomer members are provided which seal one cylinder to another when the pole is fully extended and further serve to provide a cushion to prevent damage to the cylinders when the pole is urged back into its retractable position by the elastomeric members and the venting of the pressure. A value mechanism associated with the pole is provided to admit a fluid under pressure to the interior of the telescoping cylinders of the pole while pressurizing a pressure relief port having an opening larger than the inlet port in a closed position whereby removal of the pressure on the relief port will cause the relief port to open to quickly lower the pressure in the interior of the telescoping cylinders to thereby assist in the rapid retraction of the extended pole. 18 figs.

Warren, J.L.; Brandt, J.E.

1994-08-02T23:59:59.000Z

15

Six pole/eight pole single-phase motor  

DOE Patents [OSTI]

A single phase alternating current electric motor is provided with a main stator winding having two coil groups which are connected to form eight poles for eight-pole operation and to form six poles for six-pole operation. Each group contains four series connected coil elements with each element spanning approximately one-seventh of the periphery of the machine. The coil groups are spaced 180 mechanical degrees apart such that each end coil of one group overlaps one of the end coils of the other group. An auxiliary stator winding having two coil groups with the same relative angular displacement as the main stator winding coil groups is included. 10 figs.

Kirschbaum, H.S.

1984-07-31T23:59:59.000Z

16

Single phase four pole/six pole motor  

DOE Patents [OSTI]

A single phase alternating current electric motor is provided with a main stator winding having two coil groups each including the series connection of three coils. These coil groups can be connected in series for six pole operation and in parallel for four pole operation. The coils are approximately equally spaced around the periphery of the machine but are not of equal numbers of turns. The two coil groups are identically wound and spaced 180 mechanical degrees apart. One coil of each group has more turns and a greater span than the other two coils. 10 figs.

Kirschbaum, H.S.

1984-10-09T23:59:59.000Z

17

Are Simple Real Pole Solutions Physical?  

E-Print Network [OSTI]

We consider exact solutions generated by the inverse scattering technique, also known as the soliton transformation. In particular, we study the class of simple real pole solutions. For quite some time, those solutions have been considered interesting as models of cosmological shock waves. A coordinate singularity on the wave fronts was removed by a transformation which induces a null fluid with negative energy density on the wave front. This null fluid is usually seen as another coordinate artifact, since there seems to be a general belief that that this kind of solution can be seen as the real pole limit of the smooth solution generated with a pair of complex conjugate poles in the transformation. We perform this limit explicitly, and find that the belief is unfounded: two coalescing complex conjugate poles cannot yield a solution with one real pole. Instead, the two complex conjugate poles go to a different limit, what we call a ``pole on a pole''. The limiting procedure is not unique; it is sensitive to how quickly some parameters approach zero. We also show that there exists no improved coordinate transformation which would remove the negative energy density. We conclude that negative energy is an intrinsic part of this class of solutions.

M Berg; M Bradley

2000-02-11T23:59:59.000Z

18

HIPPO (HIAPER Pole-to-Pole Observations) Data from CDIAC's HIPPO Data Archive  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

The HIPPO (HIAPER Pole-to-Pole Observations) study of the carbon cycle and greenhouse gases measured meteorology, atmospheric chemistry, and aerosol constituents along transects from approximately pole-to-pole over the Pacific Ocean. HIPPO flew hundreds of vertical profiles from the ocean/ice surface to as high as the tropopause, at five times during different seasons over a three year period from 2009-2011. HIPPO provides the first high-resolution vertically-resolved global survey of a comprehensive suite of atmospheric trace gases and aerosols pertinent to understanding the carbon cycle and challenging global climate models.

19

Lighting Inventory Lighting Theatre and Drama  

E-Print Network [OSTI]

Lighting Inventory Lighting Theatre and Drama Description Totals R.Halls Wells- Metz Light ERS ETC SourceFour 25 25 50 degree ERS Strand Lighting 64 14 24 12 14 36 degree ERS ETC Source Four 15 15 36 degree ERS Strand Lighting 124 60 58 2 4 26 degree ERS ETC SourceFour 2 2 26 degree ERS Strand

Indiana University

20

Stability of autonomous systems The pole placement problem Stabilization by state feedback State observers Pole placement and Stability, Pole Placement, Observers and  

E-Print Network [OSTI]

Stability of autonomous systems The pole placement problem Stabilization by state feedback State University of Groningen Stability, Pole Placement, Observers and Stabilization #12;Stability of autonomous and Outline 1 Stability of autonomous systems 2 The pole placement problem 3 Stabilization by state feedback 4

Trentelman, Harry L.

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Characterization of coplanar poled electro optic polymer films for Si-photonic devices with multiphoton microscopy  

SciTech Connect (OSTI)

We imaged coplanar poled electro optic (EO) polymer films on transparent substrates with a multiple-photon microscope in reflection and correlated the second-harmonic light intensity with the results of Pockels coefficient (r{sub 33}) measurements. This allowed us to make quantitative measurements of poled polymer films on non-transparent substrates like silicon, which are not accessible with traditional Pockels coefficient measurement techniques. Phase modulators consisting of silicon waveguide devices with EO polymer claddings with a known Pockels coefficient (from V{sub ?} measurements) were used to validate the correlation between the second-harmonic signal and r{sub 33}. This also allowed us to locally map the r{sub 33} coefficient in the poled area.

Himmelhuber, R., E-mail: rolandh@optics.arizona.edu; Mehravar, S. S.; Herrera, O. D.; Demir, V.; Kieu, K.; Norwood, R. A.; Peyghambarian, N. [College of Optical Sciences, University of Arizona, Tucson, Arizona 85721 (United States); Luo, J. [Soluxra LLC, Seattle, Washington 98195 (United States); Jen, A. K.-Y. [Department of Materials Science and Engineering, University of Washington, Seattle, Washington 98195 (United States)

2014-04-21T23:59:59.000Z

22

Steve Kropper WindPole Ventures, LLC  

E-Print Network [OSTI]

On Wind Is More Valuable Than Wind Power "The Bloomberg of Wind" #12;PROBLEM 300 MW wind needs backup. No construction. No tech risk. Big economic advantage $15k vs $65k. Invenergy, #5 in wind asset. 6 states prepaidSteve Kropper WindPole Ventures, LLC Lexington, MA 617-306-9312 kropper@windpole.com Information

23

EECBG Success Story: North Pole's Holiday Wish for an Energy...  

Broader source: Energy.gov (indexed) [DOE]

Pole's Holiday Wish for an Energy Efficient 2012 EECBG Success Story: North Pole's Holiday Wish for an Energy Efficient 2012 December 23, 2011 - 4:20pm Addthis The city of North...

24

Microsoft Word - CX-Murray-CusterWoodPoles_WEB.doc  

Broader source: Energy.gov (indexed) [DOE]

Covington SUBJECT: Environmental Clearance Memorandum Steve Scott Line Foreman III - TFNF-Snohomish Proposed Action: Wood pole replacement at selected locations along the...

25

The Poles of Mars: A Key to Understanding Earth's  

E-Print Network [OSTI]

deposits. We believe these layers can give us clues to the way in which the residual caps formed snow cover on Earth, lies a permanent, residual polar cap #12;Ice Age made mainly of water ice. The residual cap at the south pole is smaller tban that of the north pole, and its carbon dioxide seasonal

Faraon, Andrei

26

POLE ASSIGNMENT FOR A VIBRATING SYSTEM WITH AERODYNAMIC EFFECT #  

E-Print Network [OSTI]

POLE ASSIGNMENT FOR A VIBRATING SYSTEM WITH AERODYNAMIC EFFECT # J. N. WANG + , S. H. CHOU # , Y. C­input state feedback control arising from a one­dimensional vibrating system with aerodynamic e real axis. Key words. vibrating system, aerodynamic e#ect, state feedback control, pole assignment AMS

Chou, So-Hsiang

27

POLE ASSIGNMENT FOR A VIBRATING SYSTEM WITH AERODYNAMIC EFFECT  

E-Print Network [OSTI]

POLE ASSIGNMENT FOR A VIBRATING SYSTEM WITH AERODYNAMIC EFFECT J. N. WANG, S. H. CHOU, Y. C. CHEN feedback control arising from a one-dimensional vibrating system with aerodynamic effect. On the practical real axis. Key words. vibrating system, aerodynamic effect, state feedback control, pole assignment AMS

Lin, Wen-Wei

28

Trial Demonstration of Area Lighting Retrofit  

Broader source: Energy.gov [DOE]

LED Area Lighting Retrofit: Yuma Border Patrol Along the Yuma Sector Border Patrol Area in Yuma, Arizona, the GATEWAY program conducted a trial demonstration in which the incumbent quartz metal halide area lighting was replaced with LED at three pole locations. The LED system was found to equal or better the incumbent system in terms of both illuminance and uniformity, and an advanced optical system and lower pole height improved the illuminance uniformity, reduced stray light, and increased projected energy and maintenance cost savings. This high luminous flux and high temperature application is not unique and similar applications can benefit from the findings of this installation.

29

Shaping the spectrum of downconverted photons through optimized custom poling  

E-Print Network [OSTI]

We present a scheme for engineering the joint spectrum of photons created via spontaneous parametric down conversion. Our method relies on customizing the poling configuration of a quasi-phase-matched crystal. We use simulated annealing to find an optimized poling configuration which allows almost arbitrary shaping of the crystal's phase-matching function. This has direct application in the creation of pure single photons---currently one of the most important goals of single-photon quantum optics. We describe the general algorithm and provide code, written in C++, that outputs an optimized poling configuration given specific experimental parameters.

Annamaria Dosseva; Lukasz Cincio; Agata M. Branczyk

2014-10-28T23:59:59.000Z

30

Refined gluino and squark pole masses beyond leading order  

E-Print Network [OSTI]

The physical pole and running masses of squarks and gluinos have recently been related at two-loop order in a mass-independent renormalization scheme. I propose a general method for improvement of such formulas, and argue that better accuracy results. The improved version gives an imaginary part of the pole mass that agrees exactly with the direct calculation of the physical width at next-to-leading order. I also find the leading three-loop contributions to the gluino pole mass in the case that squarks are heavier, using effective field theory and renormalization group methods. The efficacy of these improvements for the gluino and squarks is illustrated with numerical examples. Some necessary three-loop results for gauge coupling and fermion mass beta functions and pole masses in theories with more than one type of fermion representation, which are not directly accessible from the published literature, are presented in an Appendix.

Stephen P. Martin

2006-08-02T23:59:59.000Z

31

Crater ice deposits near the south pole of Mars  

E-Print Network [OSTI]

Layered deposits atop both Martian poles are thought to preserve a record of past climatic conditions in up to three km of water ice and dust. Just beyond the extent of these south polar layered deposits (SPLD), dozens of ...

Westbrook, Owen William

2009-01-01T23:59:59.000Z

32

Avoidance of a Landau pole by flat contributions in QED  

SciTech Connect (OSTI)

We consider massless Quantum Electrodynamics in the momentum scheme and carry forward an approach based on DysonĖSchwinger equations to approximate both the ?-function and the renormalized photon self-energy (Yeats, 2011). Starting from the CallanĖSymanzik equation, we derive a renormalization group (RG) recursion identity which implies a non-linear ODE for the anomalous dimension and extract a sufficient but not necessary criterion for the existence of a Landau pole. This criterion implies a necessary condition for QED to have no such pole. Solving the differential equation exactly for a toy model case, we integrate the corresponding RG equation for the running coupling and find that even though the ?-function entails a Landau pole it exhibits a flat contribution capable of decreasing its growth, in other cases possibly to the extent that such a pole is avoided altogether. Finally, by applying the recursion identity, we compute the photon propagator and investigate the effect of flat contributions on both spacelike and timelike photons. -- Highlights: ēWe present an approach to approximate both the ?-function and the photon self-energy. ēWe find a sufficient criterion for the self-energy to entail the existence of a Landau pole. ēWe study non-perturbative Ďflatí contributions that emerge within the context of our approach. ēWe discuss a toy model and how it is affected by flat contributions.

Klaczynski, Lutz, E-mail: lutz.klaczynski@gmx.de [Department of Physics, Humboldt University Berlin, 12489 Berlin (Germany); Kreimer, Dirk, E-mail: kreimer@mathematik.hu-berlin.de [Alexander von Humboldt Chair in Mathematical Physics, Humboldt University, Berlin 12489 (Germany)

2014-05-15T23:59:59.000Z

33

Pole placement design for linear multivariable control systems  

E-Print Network [OSTI]

assignment. 4. Accuracy of the solution of FX=G. 5. Examples. IV MINIMUM NORM STATE FEEDBACK PROBLEM 1. Introduction. 2. Minimum norm algorithm. A lower bourd 4. Examples. ROBUST EIGENSTRUCTURE POLE PLACEMENT COMPENSATOR DESIGN. g 7 39 61 61 61.... 82758 4. 68965 2. 65517 L 2. 06896 -1. 72413 -3. 13793 Condition No. oi' X = 9. $0778 Closed Loop System Poles I -3 -0 99999-j. -0 99999+ii 16 B the new al orithm(A com anion form) A 0 1 0 0 0 1 -6 -8 -5 -3 ~ 2 -2 ~ 3 -0. 8 X = -7 -6. 5 ? 2 5...

Keel, Leehyun

1982-01-01T23:59:59.000Z

34

Outdoor Lighting Overview Page 6-1 2008 Nonresidential Compliance Manual August 2009  

E-Print Network [OSTI]

Outdoor Lighting ­ Overview Page 6-1 2008 Nonresidential Compliance Manual August 2009 6 Outdoor Lighting This chapter covers the requirements for outdoor lighting design and installation, including controls. This section applies to all outdoor lighting, whether attached to buildings, poles, structures

35

STEP Intern Job Description  

Broader source: Energy.gov [DOE]

STEP Intern Job Description, from the Tool Kit Framework: Small Town University Energy Program (STEP).

36

BUCKLING BEHAVIOUR OF WOODEN POLES J. Savic" S.H. Rizkalla2  

E-Print Network [OSTI]

lines and transmission towers. In recent years, a considerable number of such poles have failed duc and transmission towers. In recent years, a considerable number of such poles have failed due to heavy ice build

37

Project Description: page 1 Project Description  

E-Print Network [OSTI]

Project Description: page 1 Project Description I. Introduction: Josephson junction networks Over the past 25 years, superconducting Josephson junctions have gradually become one of the major topics standards. Our research uses Josephson junctions as model systems for problems in nonlinear and neural

Segall, Ken

38

Student Groups Student Group Description Short Description  

E-Print Network [OSTI]

Student Groups Student Group Description Short Description AHR Scholar-Architecture Scholar ART Honors - Architecture Honors H04 Honors - Allied Medical Prof Honors H05 Honors - Arts & Sciences Honors H14 Honors - Envir&Natural Resources Honors H15 Honors - Food, Agr, & Envir Sci Honors H16 Honors

39

HADES - Hydrophone for Acoustic Detection at South Pole  

E-Print Network [OSTI]

The South Pole Acoustic Test Setup (SPATS) is located in the upper part of the optical neutrino observatory IceCube, currently under construction. SPATS consists of four strings at depths between 80 m and 500 m below the surface of the ice with seven stages per string. Each stage is equipped with an acoustic sensor and a transmitter. Three strings (string A-C) were deployed in the austral summer 2006/07. SPATS was extended by a fourth string (string D) with second generation sensors and transmitters in 2007/08. One second generation sensor type HADES (Hydrophone for Acoustic Detection at South Pole) consists of a ring-shaped piezo-electric element coated with polyurethane. The development of the sensor, optimization of acoustic transmission by acoustic impedance matching and first in-situ results will be discussed.

Semburg, Benjamin

2008-01-01T23:59:59.000Z

40

HADES - Hydrophone for Acoustic Detection at South Pole  

E-Print Network [OSTI]

The South Pole Acoustic Test Setup (SPATS) is located in the upper part of the optical neutrino observatory IceCube, currently under construction. SPATS consists of four strings at depths between 80 m and 500 m below the surface of the ice with seven stages per string. Each stage is equipped with an acoustic sensor and a transmitter. Three strings (string A-C) were deployed in the austral summer 2006/07. SPATS was extended by a fourth string (string D) with second generation sensors and transmitters in 2007/08. One second generation sensor type HADES (Hydrophone for Acoustic Detection at South Pole) consists of a ring-shaped piezo-electric element coated with polyurethane. The development of the sensor, optimization of acoustic transmission by acoustic impedance matching and first in-situ results will be discussed.

Benjamin Semburg; for the IceCube Collaboration

2008-11-07T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

North Pole, Alaska: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoading map...(Utility Company) JumpNorth Haven, Maine:Ohio:Pole, Alaska: Energy Resources Jump

42

Pole-phase modulated toroidal winding for an induction machine  

DOE Patents [OSTI]

A stator (10) for an induction machine for a vehicle has a cylindrical core (12) with inner and outer slots (26, 28) extending longitudinally along the inner and outer peripheries between the end faces (22, 24). Each outer slot is associated with several adjacent inner slots. A plurality of toroidal coils (14) are wound about the core and laid in the inner and outer slots. Each coil occupies a single inner slot and is laid in the associated outer slot thereby minimizing the distance the coil extends from the end faces and minimizing the length of the induction machine. The toroidal coils are configured for an arbitrary pole phase modulation wherein the coils are configured with variable numbers of phases and poles for providing maximum torque for cranking and switchable to a another phase and pole configuration for alternator operation. An adaptor ring (36) circumferentially positioned about the stator improves mechanical strength, and provides a coolant channel manifold (34) for removing heat produced in stator windings during operation.

Miller, John Michael (Saline, MI); Ostovic, Vlado (Weinheim, DE)

1999-11-02T23:59:59.000Z

43

Factorization and resummation for collinear poles in QCD amplitudes  

SciTech Connect (OSTI)

We study the origin of subleading soft and collinear poles of form factors and amplitudes in dimensionally-regulated massless gauge theories. In the case of form factors of fundamental fields, these poles originate from a single function of the coupling, denoted G({alpha}{sub s}), depending on both the spin and gauge quantum numbers of the field. We relate G({alpha}{sub s}) to gauge-theory matrix elements involving the gluon field strength. We then show that G({alpha}{sub s}) is the sum of three terms: a universal eikonal anomalous dimension, a universal non-eikonal contribution, given by the coefficient B{sub {delta}}({alpha}{sub s}) of {delta}(1-z) in the collinear evolution kernel, and a process-dependent short-distance coefficient function, which does not contribute to infrared poles. Using general results on the factorization of soft and collinear singularities in fixed-angle massless gauge theory amplitudes, we conclude that all such singularities are captured by the eikonal approximation, supplemented only by the knowledge of B{sub {delta}}({alpha}{sub s}). We explore the consequences of our results for conformal gauge theories, where in particular we find a simple exact relation between the form factor and the cusp anomalous dimension.

Dixon, Lance J.; Magnea, Lorenzo; Sterman, George

2008-05-28T23:59:59.000Z

44

Mechanical Engineer Company Description  

E-Print Network [OSTI]

Mechanical Engineer Company Description Control Solutions Inc. is a small, dynamic, and rapidly. Position Description The Mechanical Engineer is responsible for all aspects associated with the mechanical enclosures, brackets, cabling assemblies among others. Systems include mechanisms, sensors, hydraulics, among

Kostic, Milivoje M.

45

Book review Light Scattering Reviews 4: Single Light Scattering and  

E-Print Network [OSTI]

-monograph on the use of space-time Green functions in the description of the diffusive radiation transport in active equation of the radiative transfer theory in the classical style of the ``Soviet'' school of radiativeBook review Light Scattering Reviews 4: Single Light Scattering and Radiative Transfer, A

46

Kinematic dynamo wave in the vicinity of the solar poles  

E-Print Network [OSTI]

We consider a dynamo wave in the solar convective shell for the kinematic $\\alpha\\omega$-dynamo model. The spectrum and eigenfunctions of the corresponding equations are derived analytically with the aid of the WKB method. Our main aim here is to investigate the dynamo wave behavior in the vicinity of the solar poles. Explicit expressions for the incident and reflected waves are obtained. The reflected wave is shown to be relatively weak in comparison to the incident wave. The phase shifts and the ratio of amplitudes of the two waves are found.

Victor Galitski; D. D. Sokoloff

2001-04-27T23:59:59.000Z

47

Acoustic detection of astrophysical neutrinos in South Pole ice  

E-Print Network [OSTI]

When high-energy particles interact in dense media to produce a particle shower, most of the shower energy is deposited in the medium as heat. This causes the medium to expand locally and emit a shock wave with a medium-dependent peak frequency on the order of 10 kHz. In South Pole ice in particular, the elastic properties of the medium have been theorized to provide good coupling of particle energy to acoustic energy. The acoustic attenuation length has been theorized to be several km, which could enable a sparsely instrumented large-volume detector to search for rare signals from high-energy astrophysical neutrinos. We simulated a hybrid optical/radio/acoustic extension to the IceCube array, specifically intended to detect cosmogenic (GZK) neutrinos with multiple methods simultaneously in order to achieve high confidence in a discovered signal and to measure angular, temporal, and spectral distributions of GZK neutrinos. This work motivated the design, deployment, and operation of the South Pole Acoustic Te...

Vandenbroucke, Justin

2012-01-01T23:59:59.000Z

48

Waste Description Type of Project Pounds Reduced, Reused,  

E-Print Network [OSTI]

Accelerator =1; National Synchrotron Light Source=1; Basic Energy Sciences=1) each handle 66 lbs. of hazardousWaste Description Type of Project Pounds Reduced, Reused, Recycled or Conserved in 2009 Waste Type Description Details * Alkaline batteries Recycling 200 Industrial waste $10 $0 $10 Two hundred pounds

49

Microsoft Word - CX-RossDistrictWoodPolesFY13_WEB.doc  

Broader source: Energy.gov (indexed) [DOE]

9, 2013 REPLY TO ATTN OF: KEP-Alvey SUBJECT: Environmental Clearance Memorandum Stacie Hensley Realty Specialist - TEP-TPP-4 Proposed Action: 2013 Ross District Wood Pole...

50

Microsoft Word - CX-Chehalis-CentraliaNo2WoodPolesFY12_WEB.doc  

Broader source: Energy.gov (indexed) [DOE]

0, 2012 REPLY TO ATTN OF: KEPROlympia SUBJECT: Environmental Clearance Memorandum Ryan Brady Line Foreman III - TFOK-Chehalis Proposed Action: Wood pole structure replacements on...

51

Microsoft Word - CX-AlveyMaintenanceHQ_PoleStorageUpgrade_WEB...  

Broader source: Energy.gov (indexed) [DOE]

4, 2011 REPLY TO ATTN OF: KEP-4 SUBJECT: Environmental Clearance Memorandum Brett Sherer Project Manager - KEP-4 Proposed Action: Environmental protection system upgrades at pole...

52

Microsoft Word - CX-KalispellTLMDistrictFY11WoodPoleReplacement...  

Broader source: Energy.gov (indexed) [DOE]

Bell-1 SUBJECT: Environmental Cleareance Memorandum Michael Stolfus Lineman Foreman III - TFKF-Kalispell Kurt Marsh Lineman Foreman I - TFKF-Kalispell Proposed Action: Wood pole...

53

Microsoft Word - CX-PascoDistrictPoleReplacement_FY13_WEB.docx  

Broader source: Energy.gov (indexed) [DOE]

3 REPLY TO ATTN OF: KEPRPasco SUBJECT: Environmental Clearance Memorandum Greg Wilfong Lineman Foreman III - TFPF-PASCO Proposed Action: Wood pole replacement and minor access...

54

Microsoft Word - CX-BigEddy-RedmondWoodPoles_WEB.doc  

Broader source: Energy.gov (indexed) [DOE]

1 REPLY TO ATTN OF: KEP-Celilo SUBJECT: Environmental Clearance Memorandum Darrell Aaby Line Foreman III - TFDF-Redmond Proposed Action: Wood pole replacements at select locations...

55

Microsoft Word - CX-FY11PascoDistrictWoodPoleReplacement_WEB...  

Broader source: Energy.gov (indexed) [DOE]

1, 2011 REPLY TO ATTN OF: KEPR-PASCO SUBJECT: Environmental Clearance Memorandum Toby Cossairt Lineman Foreman III - TFPF-PASCO Proposed Action: Wood pole replacement and minor...

56

Microsoft Word - CX-CowlitzTaptoChehalis-CovingtonWoodPoles_WEB...  

Broader source: Energy.gov (indexed) [DOE]

8, 2011 REPLY TO ATTN OF: KEPR-Covington SUBJECT: Environmental Clearance Memorandum Clay Grande Line Foreman III - TFCF-Covington Proposed Action: Wood pole replacement at...

57

Microsoft Word - CX-WenatcheeDistrictPoleReplacementFY13_WEB...  

Broader source: Energy.gov (indexed) [DOE]

2, 2013 REPLY TO ATTN OF: KEPRPasco SUBJECT: Environmental Clearance Memorandum Joseph Lauer Lineman Foreman III - TFWF-SCHULTZ Proposed Action: Wood pole replacement and minor...

58

Microsoft Word - CX-FY11WenatcheeDistrictWoodPoleReplacement...  

Broader source: Energy.gov (indexed) [DOE]

4, 2011 REPLY TO ATTN OF: KEPR-PASCO SUBJECT: Environmental Clearance Memorandum Terry Kugler Lineman Foreman III - TFWF-SCHULTZ Proposed Action: Wood pole replacement and minor...

59

Microsoft Word - CX-PacificCoWAWoodPolesFY12_WEB.doc  

Broader source: Energy.gov (indexed) [DOE]

6, 2012 REPLY TO ATTN OF: KEPROlympia SUBJECT: Environmental Clearance Memorandum Ryan Brady Line Foreman III - TFOK-Chehalis Proposed Action: Wood pole replacements as needed on...

60

Microsoft Word - CX-PilotButte-LaPine-WoodPoles-FY13_WEB.doc  

Broader source: Energy.gov (indexed) [DOE]

3, 2013 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Richard Heredia Project Manager - TEP-TPP-1 Proposed Action: Wood pole replacements on Bonneville Power...

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Microsoft Word - CX-RedmondWoodPoles_multiSub_WEB.doc  

Broader source: Energy.gov (indexed) [DOE]

5, 2011 REPLY TO ATTN OF: KEP-Celilo SUBJECT: Environmental Clearance Memorandum Darrell Aaby Line Foreman III - TFDF-Redmond Proposed Action: Wood pole replacement at selected...

62

Microsoft Word - CX-AlveyDistrictWoodPoles-FY14_WEB.doc  

Broader source: Energy.gov (indexed) [DOE]

8, 2014 REPLY TO ATTN OF: KEP-Alvey SUBJECT: Environmental Clearance Memorandum Stacey Hensley Project Manager - TEP-TPP-4 Proposed Action: 2014 Alvey District Wood Pole...

63

NASA Academy Program Descriptions  

E-Print Network [OSTI]

NASA Academy Program Descriptions October 2010 #12;NASA Academy Program Descriptions 2011 October 11, 2010 1/5 NASA Academy at ARC, GRC, GSFC, and MSFC Websites: Ames: http://academy.arc.nasa.gov Glenn: http://academy.grc.nasa.gov Goddard: http://academy.gsfc.nasa.gov Marshall: http://academy

Wang, Z. Jane

64

STATISTICAL DESCRIPTION OF THE  

E-Print Network [OSTI]

STATISTICAL DESCRIPTION OF THE CHIRIKOV-TAYLOR MODEL IN THE PRESENCE OF NOISE A. B. RECHESTER that the presence of noise makes the statistical description of this system unique. Theform of the diffusion, and statistical averaging, performed ana- lytically with thepath-integral method, are the same. Some

Karney, Charles

65

Forest Landscape Description and  

E-Print Network [OSTI]

Forest Landscape Description and Inventories a basis for landplanning and design Pacific Southwest landscape description and inventories ­ a basis for land plan- ning and design. Berkeley, Calif., Pacific SW. Illustrates their application in two inventories made to aid managers and landscape architects in planning

Standiford, Richard B.

66

Radio-frequency probes of Antarctic ice at South Pole  

E-Print Network [OSTI]

System Sciences O p e n A cce ss Discussions Radio-frequency probes of Antarctic ice at South Pole D. Besson1 and I. Kravchenko2 1University of Kansas, Department of Physics and Astronomy, Lawrence, KS 66045-7582, USA 2University of Nebraska Ė Lincoln... to successive waveforms. Each 0.5 meter division horizontally corresponds to approximately 5 ns. -20 -10 0 10 20 Rx v ol ta ge ( V, a ft er s ca li ng ; of fs e Time (ns, relative) 6 us echo (Vx1) 9.6 us echo (Vx1.3) 13.9 us echo (Vx3.5) 17.2 us echo (Vx10...

Besson, David Zeke; Kravchenko, I.

2013-05-16T23:59:59.000Z

67

Transient Simulation of On-Chip Transmission Lines via Exact Pole Extraction  

E-Print Network [OSTI]

Transient Simulation of On-Chip Transmission Lines via Exact Pole Extraction Guoqing Chen and Eby G response at the far end of a transmission line is proposed in this paper. Unlike approximating the poles, on-chip interconnects exhibit significant transmission line behavior. An efficient solution

Friedman, Eby G.

68

ULYSSES BEGINS EXPLORATION OF THE SUN'S NORTHERN POLE The Ulysses spacecraft has begun to explore the  

E-Print Network [OSTI]

ULYSSES BEGINS EXPLORATION OF THE SUN'S NORTHERN POLE The Ulysses spacecraft has begun to explore the northern pole of the Sun, initiating the second phase of its primary mission to study regions above and below the Sun never before explored by spacecraft. Ulysses, a joint NASA-European Space Agency mission

Christian, Eric

69

Commercial Lighting  

Broader source: Energy.gov [DOE]

Commercial lighting accounts for more than 20 percent of total commercial building energy use. The Energy Department works to reduce lighting energy use through research and deployment.

70

Description urse deals w  

E-Print Network [OSTI]

H Place: O Meeting Tentativ W L o L W L M L Description urse deals w g offshore r seamounts, animal ecology. Plant-animal interactions in the shallow subtidal zone. Lab & Field Work: Community analysis

71

B Plant facility description  

SciTech Connect (OSTI)

Buildings 225B, 272B, 282B, 282BA, and 294B were removed from the B Plant facility description. Minor corrections were made for tank sizes and hazardous and toxic inventories.

Chalk, S.E.

1996-10-04T23:59:59.000Z

72

E-Print Network 3.0 - alingap light emitting Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: :http:www.eee.hku.hkgpang Abstract The visible light from an LED (light emitting diode) traffic light can be modulated and encoded... on the description of an audio...

73

Poles as the only true resonant-state signals extracted from a worldwide collection of partial-wave amplitudes using only one, well controlled pole-extraction method  

SciTech Connect (OSTI)

Each and every energy-dependent partial-wave analysis is parametrizing the pole positions in a procedure defined by the way the continuous energy dependence is implemented. These pole positions are, henceforth, inherently model dependent. To reduce this model dependence, we use only one, coupled-channel, unitary, fully analytic method based on the isobar approximation to extract the pole positions from each available member of the worldwide collection of partial-wave amplitudes, which are understood as nothing more but a good energy-dependent representation of genuine experimental numbers assembled in a form of partial-wave data. In that way, the model dependence related to the different assumptions on the analytic form of the partial-wave amplitudes is avoided, and the true confidence limit for the existence of a particular resonant state, at least in one model, is established. The way the method works and first results are demonstrated for the S{sub 11} partial wave.

Hadzimehmedovic, M.; Osmanovic, H.; Stahov, J. [Univerzity of Tuzla, Faculty of Science, Univerzitetska 4, 75000 Tuzla (Bosnia and Herzegowina); Ceci, S.; Svarc, A. [Rudjer Boskovic Institute, Bijenicka cesta 54, P.O. Box 180, HR-10002 Zagreb (Croatia)

2011-09-15T23:59:59.000Z

74

Student Ambassador Job description  

E-Print Network [OSTI]

Blue 1 Student Ambassador Job description Department: Student Administration and Registry Location: Varies - as advised by the UK Student Recruitment and Outreach Team Job title: Student Ambassador Responsible to: UK Student Recruitment and Outreach Team Payment and benefits: £6.42 per hour Duration

Anderson, Jim

75

Pentachlorophenol (PCP)-treated wood poles and crossarms: Toxicity Characteristic Leaching Procedure (TCLP) results  

SciTech Connect (OSTI)

The objective of this study was to develop a quantitative database on leachable concentrations of pentachlorophenol (PCP) from a population of treated utility wood poles and crossarms as obtained by the Toxicity Characteristic Leaching Procedure (TCLP). An ancillary objective was to carefully document a subsampling method in preparing wood samples for tests by the TCLP. Data obtained in this study indicate that PCP-treated utility wood poles and crossarms are non-hazardous. Measured concentrations of PCP and other organic compounds subject to TCLP analysis were an order of magnitude or more below TC limits in 47 samples of wood derived from three different sections of 13 utility wood poles and from 9 crossarms. Wedge shaped subsamples, removed from full cross sectional slices of poles and crossarms, were prepared according to EPA procedures, subjected to the TCLP, and resultant leachates analyzed for the presence of PCP. 4 refs., 3 figs., 10 tab.

Horn, M.E. (Environmental Management Services, Waupaca, WI (USA)); Holcombe, L.; Owens, J.B. (Radian Corp., Austin, TX (USA))

1990-12-01T23:59:59.000Z

76

June 15, 1996 / Vol. 21, No. 12 / OPTICS LETTERS 857 Photorefractive effects in periodically poled ferroelectrics  

E-Print Network [OSTI]

- conversion interactions.2 ≠ 5 There have been several reports that periodically poled lithium niobate (PPLN s is a parameter that depends on the properties of the host crystal, donors, and traps and nd is the dark

Fejer, Martin M.

77

Microsoft Word - CX-NBendFY11WoodPolesWEND-TAHK_TAHK-RDSPT_WEB...  

Broader source: Energy.gov (indexed) [DOE]

Line Foreman III - TFEP-North Bend Line Foreman I - TFEP-North Bend Proposed Action: Wood pole replacement and minor access road maintenance along the Wendson-Tahkenitch 1 and...

78

Measurement of sound speed vs. depth in South Pole ice: pressure waves and shear waves  

E-Print Network [OSTI]

Price, Attenuation of acoustic waves in glacial ice and saltacoustics, South Pole, sound speed, pressure waves,shear waves PACS: 47.35.De, 47.35.Rs, 62.65. +k, 92.40.Vq,

Klein, Spencer

2010-01-01T23:59:59.000Z

79

Nested Saturation with Guaranteed Real Poles1 Eric N. Johnson2  

E-Print Network [OSTI]

Nested Saturation with Guaranteed Real Poles1 Eric N. Johnson2 and Suresh K. Kannan 3 School Assistant Professor of Avionics Integration eric.johnson@ae.gatech.edu 3Graduate Research Assistant suresh

Johnson, Eric N.

80

Microsoft Word - CX-ChemawaWoodPolesCT-KFG12-KOCFGT-FY12_WEB...  

Broader source: Energy.gov (indexed) [DOE]

Chemawa District Wood Pole Replacement Projects PP&A Project No.: 2325 (Carlton-Tillamook 1, Keeler-Forest Grove 2, Keeler-Oregon City 2, Keeler-Forest Grove 1, Forest...

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Microsoft Word - CX-Brasada-Harney-WoodPoles_FY13_WEB.doc  

Broader source: Energy.gov (indexed) [DOE]

2, 2013 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Richard Heredia Project Manager - TEP-TPP-1 Proposed Action: Brasada-Harney No. 1 Wood Pole Replacement...

82

Microsoft Word - CX-Driscoll-NaselleWood PolesFY12_WEB.doc  

Broader source: Energy.gov (indexed) [DOE]

2 REPLY TO ATTN OF: KEPAlvey SUBJECT: Environmental Clearance Memorandum Ryan Brady Line Foreman III - TFOK-Chehalis Proposed Action: In-kind wood pole replacements as needed on...

83

Microsoft Word - CX-OregonCity-ChemawaWoodPolesFY12_WEB .docx  

Broader source: Energy.gov (indexed) [DOE]

31, 2012 REPLY TO ATTN OF: KEP-Alvey SUBJECT: Environmental Clearance Memorandum James Semrau Project Manager - TEP-TPP-1 Proposed Action: Oregon City-Chemawa 2 Wood Pole...

84

Microsoft Word - CX-SpokaneDistrictWoodPoleReplacementsFY13_WEB...  

Broader source: Energy.gov (indexed) [DOE]

1, 2013 REPLY TO ATTN OF: KEPR-Bell-1 SUBJECT: Environmental Clearance Memorandum Amanda Williams Project Manager - TEP-TPP-1 Proposed Action: 2013 Spokane District Wood Pole...

85

Microsoft Word - CX-Redmond-PilotButte-WoodPoleFY12_WEB.doc  

Broader source: Energy.gov (indexed) [DOE]

3, 2012 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Richard Heredia Project Manager - TEP-TPP-1 Proposed Action: Redmond-Pilot Butte No. 1 Wood Pole...

86

Microsoft Word - CX-NorthBendWoodPoles_FY13_WEB.docx  

Broader source: Energy.gov (indexed) [DOE]

North Bend District Wood Pole Replacement Projects PP&A Project No.: 2658 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance Location:...

87

Microsoft Word - CX-Big Eddy-Redmond-WoodPolesFY13_WEB.doc  

Broader source: Energy.gov (indexed) [DOE]

4, 2013 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Richard Heredia Project Manager - TEP-TPP-1 Proposed Action: Big Eddy-Redmond No. 1 Wood Pole...

88

Microsoft Word - CX-AlveyDistWoodPoles_FY13_WEB.docx  

Broader source: Energy.gov (indexed) [DOE]

Alvey District Wood Pole Replacement Projects PP&A Project No.: 2663 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance Location: Various...

89

Microsoft Word - CX-LaPine-ChiloquinWoodPoleFY12_WEB.doc  

Broader source: Energy.gov (indexed) [DOE]

2 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Richard Heredia Project Manager - TEP-TPP-1 Proposed Action: La Pine-Chiloquin No. 1 Wood Pole Replacement...

90

Microsoft Word - CX-PilotButte-LaPineWoodPoleFY12_WEB.docx  

Broader source: Energy.gov (indexed) [DOE]

0, 2012 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Richard Heredia Project Manager - TEP-TPP-1 Proposed Action: Pilot Butte-La Pine No. 1 Wood Pole...

91

Measurement of sound speed vs. depth in South Pole ice: pressure waves and shear waves  

E-Print Network [OSTI]

0908.3251. [29] B. Semburg, HADESĖHydrophone for Acousticand two sensor modules of the ďHADESĒ design with one sensorDetection at South PoleĒ, HADES [29]). The sensors are

Klein, Spencer

2010-01-01T23:59:59.000Z

92

Resolution of the multichannel anomaly in the extraction of S-matrix resonance-pole parameters  

SciTech Connect (OSTI)

Within the framework of a mathematically well-defined coupled-channel T-matrix model we have improved the existing multichannel pole-extraction procedure based on the numerical analytic continuation of the channel propagator, and for the first time we present the full set of pole parameters for already published amplitudes. Standard single-channel pole-extraction method (speed plot) was then applied to those amplitudes and resulting sets of T-matrix poles were inspected. The anomaly has been established that in some partial waves the pole values extracted using the standard single-channel methods differ not only from the values obtained using the analytic continuation method, but also change from one reaction to another. Inspired by this peculiarity, we have developed a new single-channel pole-extraction method based solely on the assumption of the partial wave analyticity. Since the speed plot turns out to be the lowest order term of the proposed method, the anomaly is understood and resolved.

Ceci, Sasa [Rudjer Boskovic Institute, Bijenicka cesta 54, P.O. Box 180, 10002 Zagreb (Croatia); Department of Physics and Astronomy, University of Georgia, Athens, GA 30602 (United States); Stahov, Jugoslav [Abilene Christian University, ACU Station Box 27963, Abilene, TX 79699 (United States); University of Tuzla, Faculty of Science, Univerzitetska 4, 35000 Tuzla (Bosnia and Herzegowina); Svarc, Alfred; Zauner, Branimir [Rudjer Boskovic Institute, Bijenicka cesta 54, P.O. Box 180, 10002 Zagreb (Croatia); Watson, Shon [Abilene Christian University, ACU Station Box 27963, Abilene, TX 79699 (United States)

2008-06-01T23:59:59.000Z

93

Smart Lighting Controller!! Smart lighting!  

E-Print Network [OSTI]

1! Smart Lighting Controller!! #12;2! Smart lighting! No need to spend energy lighting the room if://blogs.stthomas.edu/realestate/2011/01/24/residential-real-estate-professionals-how-do-you- develop feedback! There is a connection between the output and the input! Therefore forces inputs to same voltage

Anderson, Betty Lise

94

Detailed Description of Key NIF Milestones for NNSA Description  

E-Print Network [OSTI]

1 Detailed Description of Key NIF Milestones for NNSA Short Description NIC EP Rev 4.0 Approved = Milestone Reporting Tool, which NNSA uses to support quarterly status reporting of NIC Level 1-2 milestones

95

Commercial Lighting and LED Lighting Incentives  

Broader source: Energy.gov [DOE]

Incentives for energy efficient commercial lighting equipment as well as commercial LED lighting equipment are available to businesses under the Efficiency Vermont Lighting and LED Lighting...

96

Lighting Renovations  

Broader source: Energy.gov [DOE]

When undertaking a lighting renovation in a Federal building, daylighting is the primary renewable energy opportunity. Photovoltaics (PV) also present an excellent opportunity. While this guide...

97

Cerenkov Light  

ScienceCinema (OSTI)

The bright blue glow from nuclear reactors is Cerenkov light. Karl Slifer describes how nuclear physicists can use this phenomenon to study the nucleus of the atom.

Slifer, Karl

2014-05-22T23:59:59.000Z

98

Cerenkov Light  

SciTech Connect (OSTI)

The bright blue glow from nuclear reactors is Cerenkov light. Karl Slifer describes how nuclear physicists can use this phenomenon to study the nucleus of the atom.

Slifer, Karl

2013-06-13T23:59:59.000Z

99

On the Hamiltonian Description of Fluid Mechanics  

E-Print Network [OSTI]

We suggest the Hamiltonian approach for fluid mechanics based on the dynamics, formulated in terms of Lagrangian variables. The construction of the canonical variables of the fluid sheds a light of the origin of Clebsh variables, introduced in the previous century. The developed formalism permits to relate the circulation conservation (Tompson theorem) with the invariance of the theory with respect to special diffiomorphisms and establish also the new conservation laws. We discuss also the difference of the Eulerian and Lagrangian description, pointing out the incompleteness of the first. The constructed formalism is also applicable for ideal plasma. We conclude with several remarks on the quantization of the fluid.

I. Antoniou; G. P. Pronko

2002-03-14T23:59:59.000Z

100

Instrument for analysis of electric motors based on slip-poles component  

DOE Patents [OSTI]

A new instrument is described for monitoring the condition and speed of an operating electric motor from a remote location. The slip-poles component is derived from a motor current signal. The magnitude of the slip-poles component provides the basis for a motor condition monitor, while the frequency of the slip-poles component provides the basis for a motor speed monitor. The result is a simple-to-understand motor health monitor in an easy-to-use package. Straightforward indications of motor speed, motor running current, motor condition (e.g., rotor bar condition) and synthesized motor sound (audible indication of motor condition) are provided. With the device, a relatively untrained worker can diagnose electric motors in the field without requiring the presence of a trained engineer or technician. 4 figs.

Haynes, H.D.; Ayers, C.W.; Casada, D.A.

1996-11-26T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Instrument for analysis of electric motors based on slip-poles component  

DOE Patents [OSTI]

A new instrument for monitoring the condition and speed of an operating electric motor from a remote location. The slip-poles component is derived from a motor current signal. The magnitude of the slip-poles component provides the basis for a motor condition monitor, while the frequency of the slip-poles component provides the basis for a motor speed monitor. The result is a simple-to-understand motor health monitor in an easy-to-use package. Straightforward indications of motor speed, motor running current, motor condition (e.g., rotor bar condition) and synthesized motor sound (audible indication of motor condition) are provided. With the device, a relatively untrained worker can diagnose electric motors in the field without requiring the presence of a trained engineer or technician.

Haynes, Howard D. (Knoxville, TN); Ayers, Curtis W. (Clinton, TN); Casada, Donald A. (Knoxville, TN)

1996-01-01T23:59:59.000Z

102

Time-Multiplexed Measurements of Nonclassical Light at Telecom Wavelengths  

E-Print Network [OSTI]

We report the experimental reconstruction of the statistical properties of an ultrafast pulsed type-II parametric down conversion source in a periodically poled KTP waveguide at telecom wavelengths, with almost perfect photon-number correlations. We used a photon-number-resolving time-multiplexed detector based on a fiber-optical setup and a pair of avalanche photodiodes. By resorting to a germane data-pattern tomography, we assess the properties of the nonclassical light states states with unprecedented precision.

G. Harder; C. Silberhorn; J. Rehacek; Z. Hradil; L. Motka; B. Stoklasa; L. L. Sanchez-Soto

2014-06-13T23:59:59.000Z

103

Pole structure from energy-dependent and single-energy fits to $?N$ elastic scattering data  

E-Print Network [OSTI]

The pole structure of the current GW/SAID partial-wave analysis of elastic $\\pi N$ scattering and $\\eta N$ production data is studied. Pole positions and residues are extracted from both the energy-dependent and single-energy fits, using two different methods. For the energy-dependent fits, both contour integration and a Laurent+Pietarinen approach are used. In the case of single-energy fits, the Laurent+Pietarinen approach is used. Errors are estimated and the two sets of results are compared to other recent and older fits to data.

Alfred ävarc; Mirza Haděimehmedovi?; Hedim Osmanovi?; Jugoslav Stahov; Ron L. Workman

2014-05-26T23:59:59.000Z

104

YUCCA MOUNTAIN SITE DESCRIPTION  

SciTech Connect (OSTI)

The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

A.M. Simmons

2004-04-16T23:59:59.000Z

105

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (Regular; Twelve and ledges and clean fixtures. Maintain building entrances according to conditions by removing snow and ice

Endres. William J.

106

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (9 month, part according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

107

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (9 month, full according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

108

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (9 month, full and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying

109

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (Regular; Twelve according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

110

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12-month, full according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

111

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: BUILDING MECHANIC II (Pay, parking lots, elevators, snow conditions, HVAC equipment temperature control systems, pool systems, ice

112

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN/EVENT ASSOCIATE entrances according to conditions by removing snow and ice, applying sand and salt, and removing debris

113

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12-month, full and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying

114

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12 month, part according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

115

Student Internship Programs Program Description  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Student Internship Programs Program Description The objective of the Laboratory's student internship programs is to provide students with opportunities for meaningful hands- on...

116

Yeast Mps1p Phosphorylates the Spindle Pole Component Spc110p in the N-terminal Domain*  

E-Print Network [OSTI]

Yeast Mps1p Phosphorylates the Spindle Pole Component Spc110p in the N-terminal Domain* Received pole body (SPB) component Spc110p (Nuf1p) undergoes specific serine/threonine phospho- rylation of Spc110p in vivo and that Mps1p phosphorylates Spc110p in vitro. Phosphopeptides generated

Davis, Trisha N.

117

Monte Carlo Posterior Integration in GARCH Peter M uller and Andy Pole  

E-Print Network [OSTI]

Monte Carlo Posterior Integration in GARCH Models Peter M¨ uller and Andy Pole Peter M along both lines to apply to the analysis of GARCH (generalized autoregressive conditional­ tion to GARCH models in Bollerslev (1986). There are now over 300 papers in the mainstream statistics

West, Mike

118

Creosote-treated wood poles and crossarms: Toxicity Characteristic Leaching Procedure (TCLP) results  

SciTech Connect (OSTI)

The objective of this study was to develop a quantitative database on leachable concentrations of cresols (i.e., m-, o- and p-cresol isomers) from a population of creosote-treated utility wood poles and crossarms by application of the Toxicity Characteristic Leaching Procedure (TCLP). The TCLP was promulgated by the US Environmental Protection Agency (EPA) in March 1990 (55FR 11798). Data generated in this study indicate that creosote-treated utility poles and crossarms are non-hazardous. Measured concentrations of total cresols and other semi-volatile organic compounds, from wood subjected to TCLP analysis, were an order of magnitude or more below their current Toxicity Characteristic (TC) regulatory levels. The wood analyzed in this study consisted of 54 samples of wood poles and 6 crossarms. Subsamples, removed from full cross sectional slices of poles and crossarms, were prepared according to EPA procedures, subjected to the TCLP, and the resultant leachates analyzed for the presence of cresols and other semi-volatile compounds.

Horn, M.E. (Environmental Management Services, Waupaca, WI (United States)); Holcombe, L.; Owens, J.B. (Radian Corp., Austin, TX (United States))

1992-07-01T23:59:59.000Z

119

Looking Deep from the South Pole: Star Formation in the Thermal Infrared  

E-Print Network [OSTI]

Looking Deep from the South Pole: Star Formation in the Thermal Infrared Michael G.Burton, John W extra-galactic star formation through a deep survey of the Hubble Deep Field{South in this band. We-eminent conditions on the Earth for wide- eld imaging at thermal infrared wavelengths. We describe a project to equip

Ashley, Michael C. B.

120

The Efficiency of Mollies, Poecilia mexicana, as Live Bait for Pole-and-Line  

E-Print Network [OSTI]

that limited bait supplies prevent further expansion of skipjack tuna, Katsuwonus pelamis, pole-line skipjack tuna, Katsuwonus pelamis, fishing. Fishing trials were con- ducted in American Samoa, Tuvalu to Katsuwonus pelamis and yel- lowfin tuna refers to Thunnus alba- cares, as given by Klawe (1977). Patrick G

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

CONTRIBUTION A LA MISE EN PLACE DU POLE GEOMATIQUE DE LA MIMEL  

E-Print Network [OSTI]

CONTRIBUTION A LA MISE EN PLACE DU POLE GEOMATIQUE DE LA MIMEL ELABORATION ET STRUCTURATION DE COUCHES "SIG" SUR LA REGLEMENTATION DES PECHES MARITIMES, SUR LES CULTURES MARINES ET SUR LA SENSIBILITE'ťtude............................................................................................................. 4 2 Rťglementation des pÍches maritimes et cultures marines

Boyer, Edmond

122

Role of Calmodulin and Spc110p Interactionin the Proper Assembly of Spindle Pole Body Components  

E-Print Network [OSTI]

Role of Calmodulin and Spc110p Interactionin the Proper Assembly of Spindle Pole Body Components PCR mutagenesis with a plasmid shuffle strategy. The temperature-sensitive allele spc110-220 differs the temperature sensitivityof spc110-220. Furthermore, calmodulin levels at the SPB decrease in the mutant cells

Davis, Trisha N.

123

PID Controller Synthesis with Shifted Axis Pole Assignment for a Class of MIMO Systems  

E-Print Network [OSTI]

PID Controller Synthesis with Shifted Axis Pole Assignment for a Class of MIMO Systems A. N. G-output plants, a systematic synthesis is developed for stabilization using Proportional+Integral+Derivative (PID-zero of the plant. Plant classes that admit PID controllers with this property include stable and unstable multi

Gundes, A. N.

124

Single-Molecule Microscopy Studies of Electric-Field Poling in Chromophore-Polymer Composite Materials  

E-Print Network [OSTI]

Single-Molecule Microscopy Studies of Electric-Field Poling in Chromophore-Polymer Composite electrooptic devices based on chromophore-polymer composite materials is to improve chromophore ordering of susceptibility.16 Chromophore-polymer composite materials lack inherent non- centrosymmetry, which is required

Reid, Philip J.

125

Temperature profile for glacial ice at the South Pole: Implications for life nearby subglacial lake  

E-Print Network [OSTI]

Temperature profile for glacial ice at the South Pole: Implications for life nearby subglacial lake deep of South of #9¬įC, which is 7¬įC below pressure¬≠induced melting temperature freshwater produce contamination Lake Vostok. semiempirical expression strain vs. stress, estimate shear depth show Ice

Woschnagg, Kurt

126

A Serenitatis origin for the Imbrian grooves and South Pole-Aitken thorium anomaly  

E-Print Network [OSTI]

1 A Serenitatis origin for the Imbrian grooves and South Pole-Aitken thorium anomaly Mark A) basin contains a high abundance of thorium and a unique Imbrian aged geomorphologic unit that consists are almost antipodal to the Imbrium basin, where high-thorium ejecta and seismic energy are expected to have

Zuber, Maria

127

Control of Delayed Recycling Systems with an Unstable Pole at Forward Path  

E-Print Network [OSTI]

Control of Delayed Recycling Systems with an Unstable Pole at Forward Path J. F. Marquez Rubio, B. del Muro Cu¬īellar and Olivier Sename Abstract-- Unstable time delay system and recycling system pose a challenge problem in their own. When unstable time delay system have recycle the control problem becomes

Paris-Sud XI, Université de

128

Damage Characterization of the Z24 Bridge by Transfer Function Pole Migration R. Andrew Swartz1  

E-Print Network [OSTI]

Damage Characterization of the Z24 Bridge by Transfer Function Pole Migration R. Andrew Swartz1 , Jerome P. Lynch2 1 PhD Candidate, Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor, MI 48109 2 Assistant Professor, Department of Civil and Environmental Engineering

Lynch, Jerome P.

129

INTO Colorado State University, Academic Advisor: Short Description Position Description  

E-Print Network [OSTI]

INTO Colorado State University, Academic Advisor: Short Description Position Description INTO Colorado State University (INTO CSU) seeks one full-time, 12-month academic advisor who will advise INTO CSU students. The primary responsibility of the academic advisor is to promote and facilitate

Stephens, Graeme L.

130

BRIGHTNESS AND FLUCTUATION OF THE MID-INFRARED SKY FROM AKARI OBSERVATIONS TOWARD THE NORTH ECLIPTIC POLE  

SciTech Connect (OSTI)

We present the smoothness of the mid-infrared sky from observations by the Japanese infrared astronomical satellite AKARI. AKARI monitored the north ecliptic pole (NEP) during its cold phase with nine wave bands covering from 2.4 to 24 {mu}m, out of which six mid-infrared bands were used in this study. We applied power-spectrum analysis to the images in order to search for the fluctuation of the sky brightness. Observed fluctuation is explained by fluctuation of photon noise, shot noise of faint sources, and Galactic cirrus. The fluctuations at a few arcminutes scales at short mid-infrared wavelengths (7, 9, and 11 {mu}m) are largely caused by the diffuse Galactic light of the interstellar dust cirrus. At long mid-infrared wavelengths (15, 18, and 24 {mu}m), photon noise is the dominant source of fluctuation over the scale from arcseconds to a few arcminutes. The residual fluctuation amplitude at 200'' after removing these contributions is at most 1.04 {+-} 0.23 nW m{sup -2} sr{sup -1} or 0.05% of the brightness at 24 {mu}m and at least 0.47 {+-} 0.14 nW m{sup -2} sr{sup -1} or 0.02% at 18 {mu}m. We conclude that the upper limit of the fluctuation in the zodiacal light toward the NEP is 0.03% of the sky brightness, taking 2{sigma} error into account.

Pyo, Jeonghyun; Jeong, Woong-Seob [Korea Astronomy and Space Science Institute (KASI), Daejeon 305-348 (Korea, Republic of); Matsumoto, Toshio [Department of Physics and Astronomy, Seoul National University, Seoul 151-742 (Korea, Republic of); Matsuura, Shuji, E-mail: jhpyo@kasi.re.kr [Institute of Space and Astronautical Science (ISAS), Japan Aerospace Exploration Agency (JAXA), Kanagawa 252-5210 (Japan)

2012-12-01T23:59:59.000Z

131

Description of the Scenario Machine  

E-Print Network [OSTI]

We present here an updated description of the "Scenario Machine" code. This tool is used to carry out a population synthesis of binary stars. Previous version of the description can be found at http://xray.sai.msu.ru/~mystery//articles/review/contents.html

V. M. Lipunov; K. A. Postnov; M. E. Prokhorov; A. I. Bogomazov

2007-04-11T23:59:59.000Z

132

Web Page Development Company Description  

E-Print Network [OSTI]

Web Page Development Company Description: Service Provider web site Short Project Name: Research support and networking. Company Description: Website Building Company. This company drives traffic to websites through search engines, and optimizes websites over time. Short Project Name: Site Build Project

Dahl, David B.

133

Double-pole nature of $?(1405)$ studied with coupled-channel complex scaling method using complex-range Gaussian basis  

E-Print Network [OSTI]

The excited hyperon $\\Lambda(1405)$ is the important building block for kaonic nuclei which are nuclear many-body system with anti-kaons. We have been investigating the $\\Lambda(1405)$ resonance with the coupled-channel Complex Scaling Method (ccCSM) in which the $\\Lambda(1405)$ is treated as a hadron-molecular state of a $\\bar{K}N$-$\\pi\\Sigma$ coupled system. We use a $\\bar{K}N$(-$\\pi Y$) potential based on the chiral SU(3) theory. In this article, we report the double-pole nature of the $\\Lambda(1405)$, which is a characteristic property predicted by many studies with chiral SU(3)-based models. With the help of the complex-range Gaussian basis in ccCSM, we have found successfully another pole besides a pole near the $\\bar{K}N$ threshold (called higher pole) which was found in our previous work with the real-range Gaussian basis. The new pole (called lower pole) is found far below $\\bar{K}N$ threshold: $(M, -\\Gamma/2)=(1395, -138)$ MeV when $f_\\pi=110$ MeV. In spite of so broad width of the lower-pole state, the state is clearly identified with good separation from continuum states, since the oscillatory behavior of the continuum states is improved owing to the complex-range Gaussian basis. Analyzing the ccCSM wave function of the lower pole, we have revealed explicitly that the lower-pole state is dominated by the $\\pi\\Sigma$ component rather than the $\\bar{K}N$ component. We have confirmed that the ccCSM wave function is correctly connected to the asymptotic form of the resonance wave function. We have estimated the meson-baryon mean distance for the lower-pole state as well as for the higher-pole state. In addition, we have investigated the origin of the appearance of the lower pole. The lower pole is confirmed to be generated by the energy dependence attributed to the chiral dynamics, by comparing the result of an energy-independent potential.

Akinobu Dote; Takayuki Myo

2014-08-04T23:59:59.000Z

134

Light Computing  

E-Print Network [OSTI]

A configuration of light pulses is generated, together with emitters and receptors, that allows computing. The computing is extraordinarily high in number of flops per second, exceeding the capability of a quantum computer for a given size and coherence region. The emitters and receptors are based on the quantum diode, which can emit and detect individual photons with high accuracy.

Gordon Chalmers

2006-10-13T23:59:59.000Z

135

Metastable light induced defects in pentacene  

SciTech Connect (OSTI)

In this study we analyzed one of the environmental factors that could affect organic materials. Pentacene thin film samples were fabricated and the degradation of their electrical characteristics was measured when the devices were exposed to ultraviolet light irradiation. The results have been reported in terms of a trap density model, which provides a description of the dynamics of light induced electrically active defects in an organic semiconductor.

Liguori, R.; Aprano, S.; Rubino, A. [Department of Industrial Engineering (DIIn), University of Salerno, via Giovanni Paolo II, 132, 84084 Fisciano (Italy)

2014-02-21T23:59:59.000Z

136

LED Traffic Light as a Communications Device Grantham Pang, Thomas Kwan, Chi-Ho Chan, Hugh Liu.  

E-Print Network [OSTI]

:http://www.eee.hku.hk/~gpang Abstract The visible light from an LED (light emitting diode) traffic light can be modulated and encoded on the description of an audio information system made up of high brightness, visible light emitting diodes (LEDs messages 1. Introduction Recently, high intensity light emitting diodes for traffic signals are available

Pang, Grantham

137

On description of quantum plasma  

E-Print Network [OSTI]

A plasma becomes quantum when the quantum nature of its particles significantly affects its macroscopic properties. To answer the question of when the collective quantum plasma effects are important, a proper description of such effects is necessary. We consider here the most common methods of description of quantum plasma, along with the related assumptions and applicability limits. In particular, we analyze in detail the hydrodynamic description of quantum plasma, as well as discuss some kinetic features of analytic properties of linear dielectric response function in quantum plasma. We point out the most important, in our view, fundamental problems occurring already in the linear approximation and requiring further investigation. (submitted to Physics-Uspekhi)

S. V. Vladimirov; Yu. O. Tyshetskiy

2011-01-21T23:59:59.000Z

138

A Search for the Dark Matter Annual Modulation in South Pole Ice  

E-Print Network [OSTI]

Astrophysical observations and cosmological data have led to the conclusion that nearly one quarter of the Universe consists of dark matter. Under certain assumptions, an observable signature of dark matter is the annual modulation of the rate of dark matter-nucleon interactions taking place in an Earth-bound experiment. To search for this effect, we introduce the concept for a new dark matter experiment using NaI scintillation detectors deployed deep in the South Pole ice. This experiment complements dark matter search efforts in the Northern Hemisphere and will investigate the observed annual modulation in the DAMA/LIBRA and DAMA/NaI experiments. The unique location will permit the study of background effects correlated with seasonal variations and the surrounding environment. This paper describes the experimental concept and explores the sensitivity of a 250 kg NaI experiment at the South Pole.

Cherwinka, J; Cowen, D F; Grant, D; Halzen, F; Heeger, K M; Hsu, L; Karle, A; Kudryavtsev, V A; Maruyama, R; Pettus, W; Robinson, M; Spooner, N J C

2011-01-01T23:59:59.000Z

139

Description Plants ESIS ESD FSGD  

E-Print Network [OSTI]

Ecological Site Description Plants ESIS ESD FSGD ESI Forestland ESI Rangeland Data Access > Return CHARACTERISTICS Site Type: Rangeland Site Name: Red Sandy Loam 25-32" PZ Site ID: R082AY369TX Major Land Resource

140

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION Job Title: DIRECTOR Department: CENTER faculty in developing and assessing course goals in support of program and university learning goals for online and blended learning. Provide assistance in evaluating and implementing educational technologies

Endres. William J.

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

The Description of Large Systems  

E-Print Network [OSTI]

In this paper we discuss the problems associated with the description and manipulation of large systems when their sources are not maintained as single fields. We show why and how tools that address these issues, such ...

Pitman, Kent

1984-09-01T23:59:59.000Z

142

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN/EVENT ASSOCIATE to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere to current uniform

Endres. William J.

143

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12 month/40 and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying be exercised over seasonal/temporary university employees and student assistants. QUALIFICATION REQUIREMENTS

144

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12 month and ice, applying sand and salt, and removing debris. Adhere to current department uniform policy supervision may be exercised over seasonal/temporary university employees and student assistants

145

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12 mos and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying be exercised over seasonal/temporary university employees and student assistants. QUALIFICATION REQUIREMENTS

146

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (9 month/20 hours and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying be exercised over seasonal/temporary university employees and student assistants. QUALIFICATION REQUIREMENTS

147

Museum Educator Volunteer Job Description  

E-Print Network [OSTI]

Museum Educator Volunteer Job Description The Beaty Biodiversity Museum, a new museum housing UBC's rich biological collections, is dedicated to enhancing to the public. Volunteer Museum Educators play a vital role in the museum mission

Pulfrey, David L.

148

Light Source  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 LawrenceEfeedstocks and the climateLife a Light

149

Light' Darkness  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 LawrenceEfeedstocks and the climateLifeLight to

150

Residential Lighting  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared atEffectquestionnairesU.S. EnergyEnergy EfficiencyLighting

151

Light Water Reactor Sustainability  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

3 Light Water Reactor Sustainability Program ACCOMPLISHMENTS REPORT 2013 Accomplishments Report | Light Water Reactor Sustainability 2 T he mission of the Light Water Reactor...

152

Light Water Reactor Sustainability  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

4 Light Water Reactor Sustainability ACCOMPLISHMENTS REPORT 2014 Accomplishments Report | Light Water Reactor Sustainability 2 T he mission of the Light Water Reactor...

153

Detaled description of spontaneous emission  

E-Print Network [OSTI]

The wave side of wave-photon duality, describing light as an electromagnetic field (EMF), is used in this article. EMF of spontaneous light emission (SE) of laser excited atom is calculated from first principles for the first time. This calculation is done using simple method of atomic quantum electrodynamics. EMF of SE is calculated also for three types of polyatomic light sources excited by laser. It is shown that light radiated by such sources can be coherent, which explains recent experiments on SE of laser excited atoms. Small sources of SE can be superradiant, which also conforms to experiment. Thus SE is shown not to be a random event itself. Random properties of natural light are simply explained as a result of thermal excitation randomness without additional hypotheses. EMF of SE is described by simple complex functions but not real ones.

Marat Guryev

2012-11-29T23:59:59.000Z

154

Light-Front Holographic QCD and Emerging Confinement  

E-Print Network [OSTI]

In this report we explore the remarkable connections between light-front dynamics, its holographic mapping to gravity in a higher-dimensional anti-de Sitter (AdS) space, and conformal quantum mechanics. This approach provides new insights into the origin of a fundamental mass scale and the physics underlying confinement dynamics in QCD in the limit of massless quarks. The result is a relativistic light-front wave equation for arbitrary spin with an effective confinement potential derived from a conformal action and its embedding in AdS space. This equation allows for the computation of essential features of hadron spectra in terms of a single scale. The light-front holographic methods described here gives a precise interpretation of holographic variables and quantities in AdS in terms of light-front variables and quantum numbers. This leads to a relation between the AdS wave functions and the boost-invariant light-front wave functions describing the internal structure of hadronic bound states in physical space-time. The pion is massless in the chiral limit and the excitation spectra of relativistic light-quark meson and baryon bound states lie on linear Regge trajectories with identical slopes in the radial and orbital quantum numbers. In the light-front holographic approach described here currents are expressed as an infinite sum of poles, and form factors as a product of poles. At large $q^2$ the form factor incorporates the correct power-law fall-off for hard scattering independent of the specific dynamics and is dictated by the twist. At low $q^2$ the form factor leads to vector dominance. The approach is also extended to include small quark masses. We briefly review in this report other holographic approaches to QCD, in particular top-down and bottom-up models based on chiral symmetry breaking. We also include a discussion of open problems and future applications.

Stanley J. Brodsky; Guy F. de Teramond; Hans Gunter Dosch; Joshua Erlich

2015-02-13T23:59:59.000Z

155

CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.

J.F. Beesley

2005-04-21T23:59:59.000Z

156

Light front Casimir effect at finite temperature  

E-Print Network [OSTI]

The correct description of the standard Casimir effect for periodic boundary conditions via light front formalism implies in these conditions imposed at fixed Minkowski times [Almeida {\\it et al.} Phys. Rev. {\\bf D 87}, 065028 (2013); Chabysheva and Hiller, Phys. Rev. {\\bf D 88}, 085006 (2013)] instead of fixed light front times. The unphysical nature of this latter condition is manifested in the vacuum part by no regularization yielding a finite Casimir energy density [Lenz and Steinbacher, Phys. Rev. {\\bf D 67}, 045010 (2003)]. In the present paper, we extend this discussion and analyze the problem of the light front quantization with simultaneous presence of a thermal bath and boundary conditions. Considering both the oblique light front as well as Dirac light front coordinates, we show that the imposition of periodic boundary conditions at fixed Minkowski times recovers the expected behaviors for the energy density and Casimir entropy. We also investigate how the unphysical nature of the periodic boundary...

Rodrigues, P L M; Alves, Danilo T; Alves, Van Sťrgio; Silva, Charles R

2015-01-01T23:59:59.000Z

157

Sustainable Office Lighting Options  

E-Print Network [OSTI]

Sustainable Office Lighting Options Task Lighting: Task lighting is a localized method of lighting a workspace so that additional, unnecessary lighting is eliminated, decreasing energy usage and costs. Illumination levels in the targeted work areas are higher with task lighting than with the ambient levels

Massachusetts at Amherst, University of

158

Mach-Zehnder Modulator Performance on the NIF South Pole Bang Time Diagnostic  

SciTech Connect (OSTI)

We present performance data for Mach-Zehnder optical modulators fielded on the National Ignition Facility (NIF) as a potential signal path upgrade for the South Pole Bang Time diagnostic. A single channel demonstration system has been deployed utilizing two modulators operating in a 90-degree In phase and Quadrature (I/Q) configuration. X-ray target emission signals are split and fed into two recording systems: a reference CRT based oscilloscope, Greenfield FTD10000, and the dual Mach-Zehnder system. Results of X-ray implosion time (bang time) determination from these two recording systems are compared and presented.

Beeman, B.; MacPhee, A. G.; Kimbrough, J. R.; Chow, R.; Carpenter, A.; Bond, E.; Zayas-Rivera, Z.; Bell, P.; Celeste, J.; Clancy, T.; Miller, E. K.; Edgell, D.; Donaldson, W. R.

2013-09-01T23:59:59.000Z

159

Hydrothermal alteration at the Panorama Formation, North Pole Dome, Pilbara Craton, Western Australia  

E-Print Network [OSTI]

An airborne hyperspectral remote sensing dataset was obtained of the North Pole Dome region of the Pilbara Craton in October 2002. It has been analyzed for indications of hydrothermal minerals. Here we report on the identification and mapping of hydrothermal minerals in the 3.459 Ga Panorama Formation and surrounding strata. The spatial distribution of a pattern of subvertical pyrophyllite rich veins connected to a pyrophyllite rich palaeohorizontal layer is interpreted to represent the base of an acid-sulfate epithermal system that is unconformably overlain by the stromatolitic 3.42 Ga Strelley Pool Chert.

Brown, Adrian J; Walter, Malcolm R

2014-01-01T23:59:59.000Z

160

Sustainable Internet Architecture PROJECT DESCRIPTION  

E-Print Network [OSTI]

Sustainable Internet Architecture PROJECT DESCRIPTION 1 Introduction The Internet currently plays that the problems in the current Internet architecture stem from its lack of sustainability which impedes future de of challenges. Numerous research studies on a new Internet architecture (e.g., [16, 37, 48, 54, 55]) have

Kuzmanovic, Aleksandar

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Project Description July 13, 2006  

E-Print Network [OSTI]

Project Description July 13, 2006 1 Results from Prior NSF Support The Department of Physics. The grant period started May 1, 1995 with a duration of twenty-four months. In this project video technology' learning of the fundamental ideas of Newtonian mechanics. With the use of low-cost video cameras

Gilfoyle, Jerry

162

Project Description Executive Summary Report  

E-Print Network [OSTI]

$Total Project Cost: 1,000,000Auxillary Enterprises Balances $ 9,400,000Revenue Financing System Bonds $ 1Project Description Executive Summary Report Project Information Project Budget Project Funding 302-680 Parking Structure Phase I This project consists of a 750 space parking garage of approximately 251

O'Toole, Alice J.

163

RF test bench automation Description  

E-Print Network [OSTI]

RF test bench automation Description: Callisto would like to implement automated RF test bench. Three RF test benches have to be studied and automated: LNA noise temperature test bench LNA gain phase of the test benches and an implementation of the automation phase. Tasks: Noise temperature

Dobigeon, Nicolas

164

THE UNIVERSITY OF CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

1 THE UNIVERSITY OF ROCHESTER CLASSIFICATION DESCRIPTION TITLE: Web Specialist and Analyst DATE: 01 ­ Advancement Service and provide assistance in the development and management of web-based assets, direct solicitations support ­ webpages for print and e-mail marketing support, web development, Share

Portman, Douglas

165

ARCHITECTURE PROGRAMS AND COURSE DESCRIPTIONS  

E-Print Network [OSTI]

2009­2010 ARCHITECTURE PROGRAMS AND COURSE DESCRIPTIONS UNIVERSITY OF MICHIGAN #12;© 2008, degree options, and courses for the UM architecture program. This document is available for download from the Taubman College website at http://www.TaubmanCollege. umich.edu/architecture/bulletin/. If you

Kamat, Vineet R.

166

Description  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phasesData FilesShape, Density, and Morphologyusing TD-DFT. |

167

Extension of the Application of the generalized pole representation to the treatment of resonance cross sections.  

SciTech Connect (OSTI)

One reliable and convenient way of processing the cross sections in the resolved energy region is by use of the generalized pole representation, whereby the Doppler-broadening calculation can be carried out rigorously using the analytical approach. So far, its applications have been limited to cases with resonance parameters specified by the Reich-Moore formalism. Although such an approach, in principle, can be extended to all three remaining representations of resolved resonance parameters specified by the ENDF data format, there is no computational tool for handling such a task at present. Given that Breit-Wigner formalisms are probably the most widely used by any evaluated nuclear data library to represent cross sections, a special effort has to be made to convert the single level and multilevel Breit-Wigner resonance parameters to pole parameters. A FORTRAN computer code BW2PR has been developed for this purpose. Extensive calculations have been performed to demonstrate that the proposed method ensures the conservation of the information contained originally in Breit-Wigner resonance parameters. This will make it possible to apply the exact Doppler-broadening method to a larger collection of nuclides.

Hwang, R. N.; Jammes, C.

1999-03-12T23:59:59.000Z

168

Gravitational Wave Spectrums from Pole-like Inflations based on Generalized Gravity Theories  

E-Print Network [OSTI]

We present a general and unified formulation which can handle the classical evolution and quantum generation processes of the cosmological gravitational wave in a broad class of generalized gravity theories. Applications are made in several inflation models based on the scalar-tensor theory, the induced gravity, and the low energy effective action of string theory. The gravitational wave power spectrums based on the vacuum expectation value of the quantized fluctuating metric during the pole-like inflation stages are derived in analytic forms. Assuming that the gravity theory transits to Einstein one while the relevant scales remain in the superhorizon scale, we derive the consequent power spectrums and the directional fluctuations of the relic radiation produced by the gravitational wave. The spectrums seeded by the vacuum fluctuations in the pole-like inflation models based on the generalized gravity show a distinguished common feature which differs from the scale invariant spectrum generated in an exponential inflation in Einstein gravity which is supported by observations.

J. Hwang

1997-10-10T23:59:59.000Z

169

GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION.  

SciTech Connect (OSTI)

THE DEPARTMENT OF ENERGY ORDER 5400.1, GENERAL ENVIRONMENTAL PROTECTION PROGRAM, REQUIRES THE DEVELOPMENT AND IMPLEMENTATION OF A GROUNDWATER PROTECTION PROGRAM. THE BNL GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION PROVIDES AN OVERVIEW OF HOW THE LABORATORY ENSURES THAT PLANS FOR GROUNDWATER PROTECTION, MONITORING, AND RESTORATION ARE FULLY DEFINED, INTEGRATED, AND MANAGED IN A COST EFFECTIVE MANNER THAT IS CONSISTENT WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

PAQUETTE,D.E.; BENNETT,D.B.; DORSCH,W.R.; GOODE,G.A.; LEE,R.J.; KLAUS,K.; HOWE,R.F.; GEIGER,K.

2002-05-31T23:59:59.000Z

170

Lighting Options for Homes.  

SciTech Connect (OSTI)

This report covers many aspects of various lighting options for homes. Types of light sources described include natural light, artificial light, incandescent lamps, fluorescent lamps, and high intensity discharge lamps. A light source selection guide gives the physical characteristics of these, design considerations, and common applications. Color, strategies for efficient lighting, and types of lighting are discussed. There is one section giving tips for various situations in specific rooms. Rooms and types of fixtures are shown on a matrix with watts saved by using the recommended type lighting for that room and room location. A major emphasis of this report is saving energy by utilizing the most suitable, recommended lighting option. (BN)

Baker, W.S.

1991-04-01T23:59:59.000Z

171

Mobile lighting apparatus  

DOE Patents [OSTI]

A mobile lighting apparatus includes a portable frame such as a moveable trailer or skid having a light tower thereon. The light tower is moveable from a stowed position to a deployed position. A hydrogen-powered fuel cell is located on the portable frame to provide electrical power to an array of the energy efficient lights located on the light tower.

Roe, George Michael; Klebanoff, Leonard Elliott; Rea, Gerald W; Drake, Robert A; Johnson, Terry A; Wingert, Steven John; Damberger, Thomas A; Skradski, Thomas J; Radley, Christopher James; Oros, James M; Schuttinger, Paul G; Grupp, David J; Prey, Stephen Carl

2013-05-14T23:59:59.000Z

172

EK101 Engineering Light Smart Lighting  

E-Print Network [OSTI]

EK101 Engineering Light Smart Lighting Homework for 9/10 1. Make an estimate (using if the patent is granted.) 3. What is a lumen? A lux? How are the two related? How would you use a lux meter, (Lux, Lumens/m2) Luminous Flux: Perceivable light power from a source, (Lumens) Use the lux meter

Bifano, Thomas

173

Pole structure from energy-dependent and single-energy fits to $\\pi N$ elastic scattering data  

E-Print Network [OSTI]

The pole structure of the current GW/SAID partial-wave analysis of elastic $\\pi N$ scattering and $\\eta N$ production data is studied. Pole positions and residues are extracted from both the energy-dependent and single-energy fits, using two different methods. For the energy-dependent fits, both contour integration and a Laurent+Pietarinen approach are used. In the case of single-energy fits, the Laurent+Pietarinen approach is used. Errors are estimated and the two sets of results are compared to other recent and older fits to data.

ävarc, Alfred; Osmanovi?, Hedim; Stahov, Jugoslav; Workman, Ron L

2015-01-01T23:59:59.000Z

174

ORIGINAL ARTICLE Approximate Truth and Descriptive Nesting  

E-Print Network [OSTI]

ORIGINAL ARTICLE Approximate Truth and Descriptive Nesting Jeffrey Alan Barrett Received: 7 July. This paper presents a notion of local probable approximate truth in terms of descriptive nesting relations

Barrett, Jeffrey A.

175

Specific light in sculpture  

E-Print Network [OSTI]

Specific light is defined as light from artificial or altered natural sources. The use and manipulation of light in three dimensional sculptural work is discussed in an historic and contemporary context. The author's work ...

Powell, John William

1989-01-01T23:59:59.000Z

176

Final environmental assessment for vegetation control at VHF stations, microwave stations, electrical substations, and pole yards  

SciTech Connect (OSTI)

Southwestern Power Adm. operates very high frequency (VHF) and microwave radio stations, electrical substations, and pole yards for electric power transmission throughout AR, MO, and OK. Vegetation growth at the stations must be suppressed for safety of operation and personnel. Southwestern has been using a combination of mechanical/manual and herbicide control for this purpose; Federally- mandated reductions in staff and budgetary resources require Southwestern to evaluate all potentially efficient methods for vegetation control. Three alternatives were examined: no action, mechanical/manual control, and (proposed) a combination of mechanical/manual and herbicide control. Environmental impacts on air and water quality, wetlands, wildlife, endangered species, archaeological and other resources, farmland, human health, transportation, etc. were evaluated.

NONE

1995-10-13T23:59:59.000Z

177

Large-Scale Structure in the ROSAT North Ecliptic Pole Survey  

E-Print Network [OSTI]

We have used the ROSAT All-Sky Survey around the North Ecliptic Pole to construct a complete sample of galaxy clusters. The deep and contiguous nature of the survey affords us the opportunity to examine large-scale structure in the Universe on scales of hundreds of megaparsecs. We have identified over 99% of the 446 X-ray sources in the survey area. The cluster sample consists of 65 objects with redshifts approaching unity. Surprisingly, some 20% of the clusters exists in a wall-like structure at z=0.088 spanning the entire 9 deg x 9 deg survey region. This is a very significant extension of both the membership and the spatial extent to a known supercluster in this location.

Christopher R. Mullis

1999-12-14T23:59:59.000Z

178

SNF AGING SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts, diagrams, drawings, lists and additional supporting information; and Appendix C is a list of procedures that will be used to operate the system.

L.L. Swanson

2005-04-06T23:59:59.000Z

179

ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

S. Roy

2004-06-24T23:59:59.000Z

180

ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this revision of the System Description Document (SDD) is to establish requirements that drive the design of the electrical power system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience are design engineers. This type of SDD leads and follows the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. This SDD follows the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to this system are obtained from ''Project Functional and Operational Requirements'' (F&OR) (Siddoway, 2003). Other requirements to support the design process have been taken from higher level requirements documents such as ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), the fire hazards analyses, and the preclosure safety analysis. The above mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canori and Leitner 2003) requirements. This SDD includes several appendices with supporting information. Appendix B lists key system charts, diagrams, drawings, and lists; and Appendix C is a list of system procedures.

M. Maniyar

2004-06-22T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Descriptive Model of Generic WAMS  

SciTech Connect (OSTI)

The Department of Energyís (DOE) Transmission Reliability Program is supporting the research, deployment, and demonstration of various wide area measurement system (WAMS) technologies to enhance the reliability of the Nationís electrical power grid. Pacific Northwest National Laboratory (PNNL) was tasked by the DOE National SCADA Test Bed Program to conduct a study of WAMS security. This report represents achievement of the milestone to develop a generic WAMS model description that will provide a basis for the security analysis planned in the next phase of this study.

Hauer, John F.; DeSteese, John G.

2007-06-01T23:59:59.000Z

182

Description of CBECS Building Types  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 633 622 56623 4623 42YearDelaware Natural2Description

183

Integrated Project Management System description  

SciTech Connect (OSTI)

The Integrated Program Management System (IPMS) Description is a ``working`` document that describes the work processes of the Uranium Mill Tailings Remedial Action Project Office (UMTRA) and IPMS Group. This document has undergone many revisions since the UMTRA Project began; this revision not only updates the work processes but more clearly explains the relationships between the Project Office, contractors, and other participants. The work process flow style has been revised to better describe Project work and the relationships of participants. For each work process, more background and guidance on ``why`` and ``what is expected`` is given. For example, a description of activity data sheets has been added in the work organization and the Project performance and reporting processes, as well as additional detail about the federal budget process and funding management and improved flow charts and explanations of cost and schedule management. A chapter has been added describing the Cost Reduction/Productivity Improvement Program. The Change Control Board (CCB) procedures (Appendix A) have been updated. Project critical issues meeting (PCIM) procedures have been added as Appendix B. Budget risk assessment meeting procedures have been added as Appendix C. These appendices are written to act as stand-alone documentation for each process. As the procedures are improved and updated, the documentation can be updated separately.

NONE

1994-09-01T23:59:59.000Z

184

IEEE TRANSACTIONS ON MAGNETICS, VOL. 45, NO. 12, DECEMBER 2009 5399 Modeling of the Starting Performance of Large Solid-Pole Synchronous  

E-Print Network [OSTI]

refineries, steel mills, and power plants [1]­[6]. Large solid pole motors are a special category of large virtual windings. Therefore, the two-axis theory can be used for the solid pole synchronous motor. We, starting performance, transformation coefficient, two-axis theory, virtual windings. I. INTRODUCTION LARGE

Mi, Chunting "Chris"

185

A FAMILY OF TWENTY-AMPERES POWER SUPPLIES FOR MULTI-POLE CORRECTORS FOR ACCELERATORS AND STORAGE RINGS  

E-Print Network [OSTI]

A FAMILY OF TWENTY-AMPERES POWER SUPPLIES FOR MULTI- POLE CORRECTORS FOR ACCELERATORS AND STORAGE of accelerator facilities and storage ring complexes in broad range of output power. Some tasks, e.g. powering-150, correspondingly. The power supplies developed meet the requirements of the up-to-date accelerator facilities

Kozak, Victor R.

186

Ultraviolet poling of pure fused silica by high-intensity femtosecond Costantino Corbari and Peter G. Kazansky  

E-Print Network [OSTI]

field of 200 kV/cm and irradiating it with high-intensity 40 GW/cm2 femtosecond 220 fs laser pulses a second-order nonlinearity in glass by poling has some very intriguing possibilities for fiber optics, first realized by Fujiwara et al.,1 consists of the irradiation of highly Ge-doped 15.7 mol % fused

Nikogosyan, David N.

187

Please leave this heading unchanged! Sound radiation of a non-rigid piston and pole cap compared with  

E-Print Network [OSTI]

Please leave this heading unchanged! Sound radiation of a non-rigid piston and pole cap compared are often modelled as a rigid piston in an infinite baffle. This model is for real loudspeakers somewhat of the baffled-piston radiation the spatial impulse response is presented. 1. Nijboer-Zernike approach

188

Sound radiation from a loudspeaker, from a spherical pole cap, and from a piston in an infinite baffle1  

E-Print Network [OSTI]

Sound radiation from a loudspeaker, from a spherical pole cap, and from a piston in an infinite are often modelled as a rigid piston in an infinite baffle. As a model for real loudspeakers, this approach of the baffled-piston radiation the spatial impulse response is presented. 1. Nijboer-Zernike approach

189

Feasibility of acoustic neutrino detection in ice: Design and performance of the South Pole Acoustic Test Setup (SPATS)  

E-Print Network [OSTI]

The South Pole Acoustic Test Setup (SPATS) has been built to evaluate the acoustic characteristics of the South Pole ice in the 10 to 100 kHz frequency range so that the feasibility and specific design of an acoustic neutrino detection array at South Pole can be evaluated. SPATS consists of three vertical strings that were deployed in the upper 400 meters of the South Pole ice cap in January 2007, using the upper part of IceCube holes. The strings form a triangular array with the longest baseline 421 meters. Each of them has 7 stages with one transmitter and one sensor module. Both are equipped with piezoelectric ceramic elements in order to produce or detect sound. Analog signals are brought to the surface on electric cables where they are digitized by a PC-based data acquisition system. The data from all three strings are collected on a master-PC in a central facility, from which they are sent to the northern hemisphere via a satellite link or locally stored on tape. A technical overview of the SPATS detect...

Boeser, S; Descamps, F; Fischer, J; Hallgren, A; Heller, R; Hundertmark, S; Krieger, K; Nahnhauer, R; Pohl, M; Price, P B; Sulanke, K -H; Tosi, D; Vandenbroucke, J

2008-01-01T23:59:59.000Z

190

Feasibility of acoustic neutrino detection in ice: Design and performance of the South Pole Acoustic Test Setup (SPATS)  

E-Print Network [OSTI]

The South Pole Acoustic Test Setup (SPATS) has been built to evaluate the acoustic characteristics of the South Pole ice in the 10 to 100 kHz frequency range so that the feasibility and specific design of an acoustic neutrino detection array at South Pole can be evaluated. SPATS consists of three vertical strings that were deployed in the upper 400 meters of the South Pole ice cap in January 2007, using the upper part of IceCube holes. The strings form a triangular array with the longest baseline 421 meters. Each of them has 7 stages with one transmitter and one sensor module. Both are equipped with piezoelectric ceramic elements in order to produce or detect sound. Analog signals are brought to the surface on electric cables where they are digitized by a PC-based data acquisition system. The data from all three strings are collected on a master-PC in a central facility, from which they are sent to the northern hemisphere via a satellite link or locally stored on tape. A technical overview of the SPATS detector and its performance is presented.

S. Boeser; C. Bohm; F. Descamps; J. Fischer; A. Hallgren; R. Heller; S. Hundertmark; K. Krieger; R. Nahnhauer; M. Pohl; P. B. Price; K. -H. Sulanke; D. Tosi; J. Vandenbroucke

2008-07-29T23:59:59.000Z

191

An indigenous origin for the South Pole Aitken basin thorium anomaly Ian Garrick-Bethell and Maria T. Zuber  

E-Print Network [OSTI]

An indigenous origin for the South Pole Aitken basin thorium anomaly Ian Garrick-Bethell and Maria high abundance of thorium as determined by Apollo and Lunar Prospector gamma-ray spectroscopy that the anomaly is the result of convergence of thorium-enriched ejecta from the Imbrium impact. Examination

Zuber, Maria

192

Surface energy budget over the South Pole and turbulent heat fluxes as a function of an empirical bulk Richardson number  

E-Print Network [OSTI]

Surface energy budget over the South Pole and turbulent heat fluxes as a function of an empirical in the monthly mean surface energy budget and to investigate the behavior of turbulent heat fluxes under stable and one as the residual of the surface energy budget (i.e., subsurface heat fluxes minus net radiation

Walden, Von P.

193

Temperature profile for glacial ice at the South Pole: Implications for life in a nearby subglacial lake  

E-Print Network [OSTI]

-induced melting temperature of freshwater ice. To produce the strong radar signal, the frozen lake must consistTemperature profile for glacial ice at the South Pole: Implications for life in a nearby subglacial by P. Buford Price, April 22, 2002 Airborne radar has detected 100 lakes under the Antarctic ice cap

Price, P. Buford

194

Sensorless Direct Torque Control For Salient Pole PMSM Based on Extended Kalman Filter Fed By AC/DC/AC Converter  

E-Print Network [OSTI]

Sensorless Direct Torque Control For Salient ­ Pole PMSM Based on Extended Kalman Filter Fed By AC is proposed. The Direct Torque Control (DTC) technique for PMSM is receiving increasing attention due on the stochastic intromission, in others words, noise. The PMSM is fed by an indirect power electronic converter

Paris-Sud XI, Université de

195

A Scalable Nanogenerator based on Self-Poled Piezoelectric Polymer Nanowires with High Energy Conversion Efficiency  

E-Print Network [OSTI]

, and a bank of capacitors to store the harvested energy, the nanogenerator is shown to be capable of lighting a commercial light emitting diode (LED). 4 Aligned P(VDF-TrFE) nanowires were grown by the infiltration of a solution of the polymer...

Whiter, Richard A.; Narayan, Vijay; Kar-Narayan, Sohini

2014-08-05T23:59:59.000Z

196

Fuel Economy of Vehicles Made in 2004 Description of the sample  

E-Print Network [OSTI]

Fuel Economy of Vehicles Made in 2004 Description of the sample: A random sample of 36 cars and light trucks was obtained from all the vehicle models made in 2004. The combined fuel economy estimate the vehicles got 22 MPG or less. There was a good deal of variability in the fuel economy of the 36 cars

Carriquiry, Alicia

197

Description The SPCM-AQR is a self-contained module  

E-Print Network [OSTI]

that exceeds 35% at 630 nm. The photodiode is both thermoelectrically cooled and temperature controlledDescription The SPCM-AQR is a self-contained module which detects single photons of light over, ensuring stabilized performance despite changes in the ambient temperature. The SPCM-AQR module utilizes

Saffman, Mark

198

Lighting and Daylight Harvesting  

E-Print Network [OSTI]

exposing us to the latest products and technologies. Daylight Harvesting A system of controlling the direction and the quantity of light both natural and artificial within a given space. This implies: Control of fenestration in terms of size..., transmission and direction. Control of reflected light within a space. Control of electric light in terms of delivery and amount Daylight harvesting systems are typically designed to maintain a minimum recommended light level. This light level...

Bos, J.

2011-01-01T23:59:59.000Z

199

Light-front chiral effective field theory  

SciTech Connect (OSTI)

We propose a general framework to calculate the nonperturbative structure of relativistic bound state systems. The state vector of the bound state is calculated in the covariant formulation of light-front dynamics. In this scheme, the state vector is defined on the light front of general position {omega} {center_dot} x = 0, where {omega} is an arbitrary light-like four-vector. This enables a strict control of any violation of rotational invariance. The state vector is then decomposed in Fock components. Our formalism is applied to the description of the nucleon properties at low energy, in chiral perturbation theory. We also show that the use of a recently proposed regularization scheme, the so-called Taylor-Lagrange regularization scheme, is very adequate in order to treat divergences in this nonperturbative framework.

Mathiot, J.-F. [Laboratoire de Physique Corpusculaire (France)] [Laboratoire de Physique Corpusculaire (France); Tsirova, N. A., E-mail: ntsirova@ssu.samara.ru [Samara State University (Russian Federation)

2013-11-15T23:59:59.000Z

200

Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER  

E-Print Network [OSTI]

Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER Subject Description Monday AND INSURANCE 242 ACTUARIAL SCIENCE 243 TRANSPORTATION AND PUBLIC UTILITIES 244 CLASSICS 250 COMMUNICATION ARTS Reporting #12;Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER Subject Description Monday

Wisconsin at Madison, University of

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Light front Casimir effect at finite temperature  

E-Print Network [OSTI]

The correct description of the standard Casimir effect for periodic boundary conditions via light front formalism implies in these conditions imposed at fixed Minkowski times [Almeida {\\it et al.} Phys. Rev. {\\bf D 87}, 065028 (2013); Chabysheva and Hiller, Phys. Rev. {\\bf D 88}, 085006 (2013)] instead of fixed light front times. The unphysical nature of this latter condition is manifested in the vacuum part by no regularization yielding a finite Casimir energy density [Lenz and Steinbacher, Phys. Rev. {\\bf D 67}, 045010 (2003)]. In the present paper, we extend this discussion and analyze the problem of the light front quantization with simultaneous presence of a thermal bath and boundary conditions. Considering both the oblique light front as well as Dirac light front coordinates, we show that the imposition of periodic boundary conditions at fixed Minkowski times recovers the expected behaviors for the energy density and Casimir entropy. We also investigate how the unphysical nature of the periodic boundary conditions imposed at fixed light front times manifests in the thermal part of the energy and entropy, showing that in the classical limit the Casimir entropy decreases linearly with the temperature (not becoming independent of the temperature as expected), and also that the Kirchhoff theorem is not respected.

P. L. M. Rodrigues; Silvana Perez; Danilo T. Alves; Van Sťrgio Alves; Charles R. Silva

2015-01-06T23:59:59.000Z

202

Machinist Pipeline/Apprentice Program Program Description  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Machinist PipelineApprentice Program Program Description The Machinist Pipeline Program was created by the Prototype Fabrication Division to fill a critical need for skilled...

203

Electricity Delivery and Energy Reliability PROGRAM DESCRIPTION  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

32 Electricity Delivery and Energy Reliability PROGRAM DESCRIPTION The Office of Electricity Delivery and Energy Reliability (OE) leads national efforts to modernize the electric...

204

Phenomenological description of bidirectional surface reflection  

E-Print Network [OSTI]

Phenomenological description of bidirectional surface reflection Jan J. Koenderink and Andrea J satellites). In some cases one has (usually approximate, phenomenological) models, but in most cases one

O'Brien, James F.

205

Home energy rating systems: Program descriptions  

SciTech Connect (OSTI)

This report contains the descriptions of home energy rating and labelling programs (HERS) that were surveyed in January 1986 as part of a national evaluation of HERS.

Vine, E.; Barnes, B.K.; Ritschard, R.

1987-02-01T23:59:59.000Z

206

Generation of polarization entangled photons using type-II doubly periodically poled lithium niobate waveguides  

E-Print Network [OSTI]

In this paper, we address the issue of the generation of non-degenerate cross-polarization-entangled photon pairs using type-II periodically poled lithium niobate. We show that, by an appropriate engineering of the quasi-phase-matching grating, it is possible to simultaneously satisfy the conditions for two spontaneous parametric down-conversion processes, namely ordinary pump photon down-conversion to either extraordinary signal and ordinary idler paired photons, or to ordinary signal and extraordinary idler paired photons. In contrast to single type-II phase-matching, these two processes, when enabled together, can lead to the direct production of cross-polarization-entangled state for non degenerate signal and idler wavelengths. Such a scheme should be of great interest in applications requiring polarization-entangled non degenerate paired photons with, for instance, one of the entangled photons at an appropriate wavelength being used for local operation or for quantum storage in an atomic ensemble, and the other one at the typical wavelength of 1550 nm for propagation through an optical fiber.

K. Thyagarajan; K. Sinha; J. Lugani; S. Ghosh; A. Martin; D. B. Ostrowsky; O. Alibart; S. Tanzilli

2009-12-29T23:59:59.000Z

207

Axial gap permanent-magnet machine with reluctance poles and PM element covers  

SciTech Connect (OSTI)

An electric machine (10) has a disk-shaped rotor (24) disposed in an operating space between two opposing stator assemblies (11, 12) to provide two axial air gaps (15, 16). The rotor (24) has a hub (28) and an outer ring (26) of non-magnetic material and is further provided with a plurality of permanent magnetic elements (25) for coupling flux that is induced by the magnetic field of the stator assemblies (11, 12). The permanent magnetic elements (25) are spaced apart and reluctance poles (27) are positioned in spaces between the magnetic elements (25) to couple additional flux induced by the magnetic field of the stator assemblies (11, 12). Various constructions and shapes (40-45) for the PM magnetic elements (25) are disclosed, and including PM covers (60) of ferromagnetic material for enhancing q-axis flux in the air gaps (15, 16) and for reducing harmonics where toothed stators are used. Methods of providing increased torque using the the various rotor constructions are also disclosed.

Hsu, John S [Oak Ridge, TN; McKeever, John W [Oak Ridge, TN

2009-04-07T23:59:59.000Z

208

Kyler Nelson Light Timer  

E-Print Network [OSTI]

designated by the user, the Arduino board will dim the light to save energy. The user designates the time instance, the light is dimmed using pulse width modulation (PWM) in the Arduino's pin number 11

Kachroo, Pushkin

209

Why is there lighting in Title 24? 1. Brief history  

E-Print Network [OSTI]

OTHER CRITICAL LEGISLATION LEGISLATION DESCRIPTION Global Warming Solutions Act (AB 32, 2006) Reduce greenhouse gas emissions to 1990 levels by 2020. Huffman Bill (AB 1109, 2007) Reduce lighting energy consumption by more than 50% from 2007 residential levels and 25% from 2007 commercial levels by 2018

California at Davis, University of

210

MATERIALS DEGRADATION ANALYSIS AND DEVELOPMENT TO ENABLE ULTRA LOW COST, WEB-PROCESSED WHITE P-OLED FOR SSL  

SciTech Connect (OSTI)

Progress over Phase II of DE-FG02-07ER86293 'Materials Degradation Analysis and Development to Enable Ultra Low Cost, Web-Processed White P-OLED for SSL' was initially rapid in terms of device performance improvements. We exceeded our device luminance lifetime goals for printed flexible white OLEDs as laid out in our project proposal. Our Phase II performance target was to demonstrate >1500 hours luminance lifetime at 100 Cd/m2 from a printed flexible device. We now have R&D devices well in excess of 8000 hrs lifetime at 100 Cd/m2, tested in air. We also were able to produce devices which met the voltage target of >1500 hours below 15V operation. After completing the initial performance milestones, we went on to focus on color-related degradation issues which were cited as important to commercialization of the technology by our manufacturing partners. We also put additional focus on cathode work as the active material development that occurred over the STTR time period required an adaptation of the cathode from the original cathode formulations which were developed based on previous generation active layer materials. We were able to improve compatibility of the cathode with some of the newer generation active layer materials and improve device yield and voltage behavior. An additional objective of the initial Phase II was to further develop the underlying manufacturing technology and real-life product specifications. This is a key requirement that must be met to ensure eventual commercialization of this DOE-funded technology. The link between commercial investment for full commercialization and R&D efforts in OLED solid State Lighting is often a large one. Add-Vision's lower cost, printed OLED manufacturing approach is an attraction, but close engagement with manufacturing partners and addressing customer specifications is a very important link. Manufacturing technology encompasses development of moisture reduction encapsulation technology, improved cost performance, and reductions in operating voltage through thinner and higher uniformity active device layers. We have now installed a pilot encapsulation system at AVI for controlled, high throughput lamination encapsulation of flexible OLEDs in a novel process. Along with this, we have developed, with our materials supply partners, adhesives, barrier films and other encapsulation materials and we are showing total air product lifetimes in the 2-4 years range from a process consistent with our throughput goals of {approx}1M device per month ({approx}30,000 sq. ft. of processed OLEDs). Within the last year of the project, we have been working to introduce the manufacturing improvements made in our LEP deposition and annealing process to our commercial partners. Based on the success of this, a pilot scale-up program was begun. During this process, Add-Vision was acquired by a strategic partner, in no small part, because of the promise of future success of the technology as evidenced by our commercial partners pilot scale-up plans. Overall, the performance, manufacturing and product work in this project has been successful. Additional analysis and device work at LBL has also shown a unique adhesion change with device bias stressing which may result from active layer polymer cross-linking during bias stressing of device. It was shown that even small bias stresses, as a fraction of a full device lifetime stress period, result in measurable chemical change in the device. Further work needs to be conducted to fully understand the chemical nature of this interaction. Elucidation of this effect would enable doped OLED formulation to be engineered to suppress this effect and further extend lifetimes and reduce voltage climb.

DR. DEVIN MACKENZIE

2011-12-13T23:59:59.000Z

211

AIRPORT LIGHTING Session Highlights  

E-Print Network [OSTI]

AIRPORT LIGHTING Session Highlights In May 2002, the Airport Technical Assistance Program, also known as AirTAP, sponsored three airport-lighting training sessions at different locations in Minnesota information on airport lighting and navigational aid equipment selection, funding, maintenance, and operation

Minnesota, University of

212

Advanced Demand Responsive Lighting  

E-Print Network [OSTI]

Advanced Demand Responsive Lighting Host: Francis Rubinstein Demand Response Research Center demand responsive lighting systems ­ Importance of dimming ­ New wireless controls technologies · Advanced Demand Responsive Lighting (commenced March 2007) #12;Objectives · Provide up-to-date information

213

Light emitting device comprising phosphorescent materials for white light generation  

DOE Patents [OSTI]

The present invention relates to phosphors for energy downconversion of high energy light to generate a broadband light spectrum, which emit light of different emission wavelengths.

Thompson, Mark E.; Dapkus, P. Daniel

2014-07-22T23:59:59.000Z

214

Light Duty Combustion Research: Advanced Light-Duty Combustion...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combustion Research: Advanced Light-Duty Combustion Experiments Light Duty Combustion Research: Advanced Light-Duty Combustion Experiments 2009 DOE Hydrogen Program and Vehicle...

215

WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED,  

E-Print Network [OSTI]

Fuel oil and Turkey Based Biofuel Energy Rocovery 12,000 Industrial Waste $30,000 $500 $29,500 1500WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED, REUSED, RECYCLED OR CONSERVED IN 2006 WASTE TYPE DESCRIPTION DETAILS * Aerosol Can Disposal System Recycling 528 66 pounds of hazardous waste per unit $7

216

DESCRIPTIVE TEXT SEA WATER INORGANIC CARBON DATABASE  

E-Print Network [OSTI]

DESCRIPTIVE TEXT SEA WATER INORGANIC CARBON DATABASE for the CARBON DIOXIDE INFORMATION OF OCEANOGRAPHY (SIO) I. GENERAL DESCRIPTION The database consists of tables presenting oceanic inorganic carbon, titration (total) alkalinity (database abbreviation: "ALK"), and the 13 C / 12 C isotopic ratio

217

STUDENT LABOR POSITION DESCRIPTION Forestry Department  

E-Print Network [OSTI]

approved STUDENT LABOR POSITION DESCRIPTION Forestry Department Most Recently Updated 10/17/00 Position Title: Student Forestry Aid Must work 10 hrs/wk. I. Grade Level: 1­3 (includes full-time, summer and other holiday labor positions) II. Description: A. The following are the essential duties for a Forestry

Baltisberger, Jay H.

218

Internship Description Title: Stellar Solutions Engineering Internship  

E-Print Network [OSTI]

Internship Description Title: Stellar Solutions ­ Engineering Internship Job Description: The internship will be held at the Stellar National Reconnaissance Office in Washington, DC. Tasks will require a background in intelligence, and familiar with all-source analysis. This internship is flexible throughout

Virginia Tech

219

CHAPTER 5. PLASMA DESCRIPTIONS I: KINETIC, TWO-FLUID 1 Plasma Descriptions I  

E-Print Network [OSTI]

CHAPTER 5. PLASMA DESCRIPTIONS I: KINETIC, TWO-FLUID 1 Chapter 5 Plasma Descriptions I: Kinetic, Two-Fluid Descriptions of plasmas are obtained from extensions of the kinetic theory of gases of charged particles in the plasma, and because the electric and magnetic fields in the plasma must

Callen, James D.

220

WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED,  

E-Print Network [OSTI]

to the manufacturer . Replaced with energy efficient light emitting diode (LED) signs. Project reduced risk of tritium

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Photonic crystal light source  

DOE Patents [OSTI]

A light source is provided by a photonic crystal having an enhanced photonic density-of-states over a band of frequencies and wherein at least one of the dielectric materials of the photonic crystal has a complex dielectric constant, thereby producing enhanced light emission at the band of frequencies when the photonic crystal is heated. The dielectric material can be a metal, such as tungsten. The spectral properties of the light source can be easily tuned by modification of the photonic crystal structure and materials. The photonic crystal light source can be heated electrically or other heating means. The light source can further include additional photonic crystals that exhibit enhanced light emission at a different band of frequencies to provide for color mixing. The photonic crystal light source may have applications in optical telecommunications, information displays, energy conversion, sensors, and other optical applications.

Fleming, James G. (Albuquerque, NM); Lin, Shawn-Yu (Albuquerque, NM); Bur, James A. (Corrales, NM)

2004-07-27T23:59:59.000Z

222

Light extraction from organic light-emitting diodes for lighting applications by sand-blasting  

E-Print Network [OSTI]

Light extraction from organic light-emitting diodes for lighting applications by sand@ust.hk Abstract: Light extraction from organic light-emitting diodes (OLEDs) by scattering the light is one of the effective methods for large-area lighting applications. In this paper, we present a very simple and cost

223

COSMOLOGICAL CONSTRAINTS FROM SUNYAEV-ZEL'DOVICH-SELECTED CLUSTERS WITH X-RAY OBSERVATIONS IN THE FIRST 178 deg[superscript 2] OF THE SOUTH POLE TELESCOPE SURVEY  

E-Print Network [OSTI]

We use measurements from the South Pole Telescope (SPT) Sunyaev-Zel'dovich (SZ) cluster survey in combination with X-ray measurements to constrain cosmological parameters. We present a statistical method that fits for the ...

Andersson, Karl

224

SMART LIGHTING SYSTEMS ULTIMATE LIGHTING The Smart Lighting  

E-Print Network [OSTI]

Integration (Holistic Integrated Design) · Sensors as important as LEDs · Interconnected systems (human, building, grid) · Artistic Design Freedom · Lighting is Health, Entertainment, Information and Illumination Cost at any brightness · Chip level integrated electronics THE ERC RESEARCH COVERS THE ENTIRE SUPPLY

Linhardt, Robert J.

225

Increasing the solid angle of the Enge Split-Pole Magnetic Spectrograph and continuing the development of the hybrid detector system  

E-Print Network [OSTI]

INCREASING THE SOLID ANGLE OF THK ENGR SPLIT-POLE MAGNETIC SPECTROGRAPH AND CONTINUING THK DEVELOPMENT OF THE HYBRID DETECTOR SYSTEM A Thesis by PHILIP WILLIAM BOWMAN Submitted to the Office of Graduate Studies of Texas A&M University... in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE May 1991 Major Subject: Physics INCREASING THE SOLID ANGLE OF THE ENGR SPLIT-POLE NAGNETIC SPECTROGRAPH AND CONTINUING THE DEVELOPMENT OF THE HYBRID DETECTOR SYSTEN A Thesis...

Bowman, Philip William

2012-06-07T23:59:59.000Z

226

Light-Front Holography and Gauge/Gravity Duality: The Light Meson and Baryon Spectra  

SciTech Connect (OSTI)

Starting from the bound state Hamiltonian equation of motion in QCD, we derive relativistic light-front wave equations in terms of an invariant impact variable {zeta} which measures the separation of the quark and gluonic constituents within the hadron at equal light-front time. These equations of motion in physical space-time are equivalent to the equations of motion which describe the propagation of spin-J modes in anti-de Sitter (AdS) space. Its eigenvalues give the hadronic spectrum, and its eigenmodes represent the probability amplitudes of the hadronic constituents at a given scale. An effective classical gravity description in a positive-sign dilaton background exp(+{kappa}{sup 2}z{sup 2}) is given for the phenomenologically successful soft-wall model which naturally encodes the internal structure of hadrons and their orbital angular momentum. Applications to the light meson and baryon spectrum are presented.

de Teramond, Guy F.; /Costa Rica U.; Brodsky, Stanley J.; /SLAC

2009-12-09T23:59:59.000Z

227

Arnold Schwarzenegger LIGHTING RESEARCH PROGRAM  

E-Print Network [OSTI]

Project Summaries ELEMENT 2: ADVANCE LIGHTING TECHNOLOGIES PROJECT 2.1 LIGHT EMITTING DIODE (LED light emitting diodes (LED) technology for general lighting applications by developing a task lamp

228

New Light Sources for Tomorrow's Lighting Designs  

E-Print Network [OSTI]

, pioneered for headlam~for the automotive industry, has led to the development of halo en capsule lamps for general lighting. The original90-watt family PAR 38 lamps using tungsten halogen capsules produces the sa amount of useful light in the beam as a I... quartz PAR lamps with similar benefi . Each of these tungsten halogen capsule PAR wattages are av ilable in narrow spot, spot, and flood beam patterns. The most recent developments in the PAR halogen psule family include two entirely new lamp designs...

Krailo, D. A.

229

National Synchrotron Light Source  

ScienceCinema (OSTI)

A tour of Brookhaven's National Synchrotron Light Source (NSLS), hosted by Associate Laboratory Director for Light Sources, Stephen Dierker. The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviolet, and x-ray light for basic and applied research in physics, chemistry, medicine, geophysics, environmental, and materials sciences.

BNL

2009-09-01T23:59:59.000Z

230

LED Lighting Retrofit  

E-Print Network [OSTI]

? Municipal Street Lighting Consortium ? American Public Power Association (APPA) ? Demonstration in Energy Efficiency Development (DEED) ? Source of funding and database of completed LED roadway projects 6 Rules of the Road ESL-KT-11-11-57 CATEE 2011..., 2011 ? 9 Solar-Assisted LED Case Study LaQuinta Hotel, Cedar Park, Texas ? Utilizes 18 - ActiveLED Solar-Assisted Parking Lot Lights ? Utilizes ?power management? to extend battery life while handling light output ? Reduces load which reduces PV...

Shaw-Meadow, N.

2011-01-01T23:59:59.000Z

231

High efficiency incandescent lighting  

DOE Patents [OSTI]

Incandescent lighting structure. The structure includes a thermal emitter that can, but does not have to, include a first photonic crystal on its surface to tailor thermal emission coupled to, in a high-view-factor geometry, a second photonic filter selected to reflect infrared radiation back to the emitter while passing visible light. This structure is highly efficient as compared to standard incandescent light bulbs.

Bermel, Peter; Ilic, Ognjen; Chan, Walker R.; Musabeyoglu, Ahmet; Cukierman, Aviv Ruben; Harradon, Michael Robert; Celanovic, Ivan; Soljacic, Marin

2014-09-02T23:59:59.000Z

232

National Forest Inventory Description of attributes  

E-Print Network [OSTI]

National Forest Inventory Description of attributes Woodland_S: Woodland source (a) NFI base map have been mapped in accordance with the NFI mapping rules. National Forest Inventory #12;(f) 2010 AP

233

CHP R&D Project Descriptions  

Broader source: Energy.gov [DOE]

The CHP R&D project portfolio includes advanced reciprocating engine systems (ARES), packaged CHP systems, high-value applications, fuel-flexible CHP, and demonstrations of these technologies. Project fact sheets and short project descriptions are provided below:

234

Project Manager, TBD Job Description Questionnaire (JDQ)  

E-Print Network [OSTI]

Project Manager, TBD Job Description Questionnaire (JDQ) Professional Staff Instructions What with a disability in regard to job application procedures, the hiring or discharge of employees, employee Below to Certify Approval or Disapproval: Approval Disapproval ( ) ( ) TBD, Project Manager

Barrash, Warren

235

Creation of Computer Animation from Story Descriptions  

E-Print Network [OSTI]

This report describes a computer system that creates simple computer animation in response to high-level, vague, and incomplete descriptions of films. It makes its films by collecting and evaluating suggestions from ...

Kahn, Kenneth Michael

1979-08-01T23:59:59.000Z

236

COURSE TITLES COURSE DESCRIPTIONS Organizational Behavior &  

E-Print Network [OSTI]

COURSE TITLES COURSE DESCRIPTIONS MGT 5371 Organizational Behavior & Organizational Design Examines management of individual, interpersonal, group and intergroup relations, organizational design and experiential learning to accelerate their development as authentic leaders. MGT 5373 Opportunity Creation

Rock, Chris

237

Building English Explanations from Function Descriptions  

E-Print Network [OSTI]

An explanatory component is an important ingredient in any complex AI system. A simple generative scheme to build descriptive phrases from Lisp function calls can produce respectable explanations if explanation generators ...

Roberts, Bruce

238

Total Light Management  

Broader source: Energy.gov [DOE]

Presentation covers total light management, and is given at the Spring 2010 Federal Utility Partnership Working Group (FUPWG) meeting in Providence, Rhode Island.

239

Lighting Technology Panel  

Broader source: Energy.gov [DOE]

Presentation covers the†Lighting Technology Panel for the Federal Utility Partnership Working Group (FUPWG) meeting, held on†November 18-19, 2009.†

240

Comparing Light Bulbs  

Broader source: Energy.gov [DOE]

In this exercise, students will use a light to demonstrate the difference between being energy-efficient and energy-wasteful, and learn what energy efficiency means.

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Solid-State Lighting  

Broader source: Energy.gov (indexed) [DOE]

research and design. Quality LED luminaires require program designed to successfully move solid-state lighting precise design of several components -LED arrays, electronic into the...

242

The U5. 0 undulator design for the advanced light source at LBL  

SciTech Connect (OSTI)

The U5.0 undulator, currently under design, is the first in a series of insertion devices planned for the Advanced Light Source at LBL. U5.0 parameters include a 5 cm period, 5 m length with a 0.837 T maximum field at a 14 mm gap. A hybrid configuration utilizing Nd-Fe-B permanent magnet material and Vanadium Permendur poles is used for the magnetic structure. Construction is modular with many pole assemblies attached to a pole mount, which in turn is fastened onto one of the backing beams. Vertical field integral correction at the ends is with permanent magnet rotators. The supports structure features a 4-post configuration, a rigid base with 3 kinematic floor supports and 2 rigid 5 m long backing beams that fit within the 2.4 m high accelerator enclosure. The drive system is computer controlled utilizing a stepper motor and shaft encode coupled to a roller-screw/nut and chain drive train. Vacuum chamber design is a rigid configuration with a 10 mm vertical by 218 mm horizontal aperture of 5.5 m length. Chamber fabrication features a two-piece welded chamber of 5083 H321 aluminum. Pumping is with ion and titanium sublimation pumps. 5 figs., 1 tab.

Hoyer, E.; Chin, J.; Halbach, K.; Hassenzahl, W.; Humphries, D.; Kincaid, B.; Lancaster, H.; Plate, D.; Savoy, R.

1989-08-01T23:59:59.000Z

243

Don de MR H. BREUIL DESCRIPTION  

E-Print Network [OSTI]

Don de MR H. BREUIL DESCRIPTION D UN SQUELETTE HUMAIN PHEHISTOHIOUE U ['COU Y BUT A ANTHY, pr√®s de O R R A Z ET Cio ITUT 3GIE 1U05 ¬∑ . ¬∑ r.6o. #12;DESCRIPTION ¬∑ r SQUELETTE HUMAIN PR√?HISTORIQUE √† l'√©poque litcuslre. Voil√† 1rs quelques renseignements qu'on m'a communiqu√©s √† ce sujet : En

Boyer, Edmond

244

Making More Light with Less Energy  

SciTech Connect (OSTI)

Representing the Center for Energy Efficient Materials (CEEM), this document is one of the entries in the Ten Hundred and One Word Challenge. As part of the challenge, the 46 Energy Frontier Research Centers were invited to represent their science in images, cartoons, photos, words and original paintings, but any descriptions or words could only use the 1000 most commonly used words in the English language, with the addition of one word important to each of the EFRCs and the mission of DOE: energy. The mission of the CEEM is to discover and develop materials that control the interactions among light, electricity, and heat at the nanoscale for improved solar energy conversion, solid-state lighting, and conversion of heat into electricity.

Kuritzky, Leah; Jewell, Jason

2013-07-18T23:59:59.000Z

245

The shape dynamics description of gravity  

E-Print Network [OSTI]

Classical gravity can be described as a relational dynamical system without ever appealing to spacetime or its geometry. This description is the so-called shape dynamics description of gravity. The existence of relational first principles from which the shape dynamics description of gravity can be derived is a motivation to consider shape dynamics (rather than GR) as the fundamental description of gravity. Adopting this point of view leads to the question: What is the role of spacetime in the shape dynamics description of gravity? This question contains many aspects: Compatibility of shape dynamics with the description of gravity in terms of spacetime geometry, the role of local Minkowski space, universality of spacetime geometry and the nature of quantum particles, which can no longer be assumed to be irreducible representations of the Poincare group. In this contribution I derive effective spacetime structures by considering how matter fluctuations evolve along with shape dynamics. This evolution reveals an "experienced spacetime geometry." This leads (in an idealized approximation) to local Minkowski space and causal relations. The small scale structure of the emergent geometric picture depends on the specific probes used to experience spacetime, which limits the applicability of effective spacetime to describe shape dynamics. I conclude with discussing the nature of quantum fluctuations (particles) in shape dynamics and how local Minkowski spacetime emerges from the evolution of quantum particles.

Tim Koslowski

2015-01-13T23:59:59.000Z

246

OpenGL Lighting 13. OpenGL Lighting  

E-Print Network [OSTI]

OpenGL Lighting 13. OpenGL Lighting · Overview of Lighting in OpenGL In order for lighting to have an effect in OpenGL, two things are required: A light An object to be lit Lights can be set to any color determine how they reflect the light which hits them. The color(s) of an object is determined

McDowell, Perry

247

Ultraviolet laser-induced poling inhibition produces bulk domains in MgO-doped lithium niobate crystals  

SciTech Connect (OSTI)

We report the realization of high-resolution bulk domains achieved using a shallow, structured, domain inverted surface template obtained by UV laser-induced poling inhibition in MgO-doped lithium niobate. The quality of the obtained bulk domains is compared to those of the template and their application for second harmonic generation is demonstrated. The present method enables domain structures with a period length as small as 3??m to be achieved. Furthermore, we propose a potential physical mechanism that leads to the transformation of the surface template into bulk domains.

Boes, Andreas, E-mail: s3363819@student.rmit.edu.au; Steigerwald, Hendrik; Sivan, Vijay; Mitchell, Arnan [School of Electrical and Computer Engineering, RMIT University, Melbourne, Victoria 3001 (Australia); ARC Center for Ultra-high Bandwidth Devices for Optical Systems (CUDOS), RMIT University, Melbourne, Victoria 3001 (Australia); Yudistira, Didit [School of Electrical and Computer Engineering, RMIT University, Melbourne, Victoria 3001 (Australia); Wade, Scott [Faculty of Science, Engineering and Technology, Swinburne University of Technology, Hawthorn, Victoria 3122 (Australia); Mailis, Sakellaris [Optoelectronics Research Centre, University of Southampton, Highfield, Southampton SO17 1BJ (United Kingdom); Soergel, Elisabeth [Institute of Physics, University of Bonn, Wegelerstr. 8, 53115 Bonn (Germany)

2014-09-01T23:59:59.000Z

248

Hyperspectral imaging spectroscopy of a Mars analogue environment at the North Pole Dome, Pilbara Craton, Western Australia  

E-Print Network [OSTI]

A visible and near infrared (VNIR) to shortwave infrared (SWIR) hyperspectral dataset of the Early Archaean North Pole Dome, Pilbara Craton, Western Australia, has been analysed for indications of hydrothermal alteration. Occurrence maps of hydrothermal alteration minerals were produced. It was found that using a spatial resolution on the ground of approximately 5 m and spectral coverage from 0.4 to 2.5 mm was sufficient to delineate several hydrothermal alteration zones and associated veins, including phyllic, serpentinitic and chloritic alteration. These results suggest this level of spectral and spatial resolution would be ideal for localising shallow epithermal activity, should such activity have existed, on the surface of Mars.

Brown, Adrian J; Cudahy, Thomas

2014-01-01T23:59:59.000Z

249

Light intensity compressor  

DOE Patents [OSTI]

In a system for recording images having vastly differing light intensities over the face of the image, a light intensity compressor is provided that utilizes the properties of twisted nematic liquid crystals to compress the image intensity. A photoconductor or photodiode material that is responsive to the wavelength of radiation being recorded is placed adjacent a layer of twisted nematic liquid crystal material. An electric potential applied to a pair of electrodes that are disposed outside of the liquid crystal/photoconductor arrangement to provide an electric field in the vicinity of the liquid crystal material. The electrodes are substantially transparent to the form of radiation being recorded. A pair of crossed polarizers are provided on opposite sides of the liquid crystal. The front polarizer linearly polarizes the light, while the back polarizer cooperates with the front polarizer and the liquid crystal material to compress the intensity of a viewed scene. Light incident upon the intensity compressor activates the photoconductor in proportion to the intensity of the light, thereby varying the field applied to the liquid crystal. The increased field causes the liquid crystal to have less of a twisting effect on the incident linearly polarized light, which will cause an increased percentage of the light to be absorbed by the back polarizer. The intensity of an image may be compressed by forming an image on the light intensity compressor.

Rushford, Michael C. (Livermore, CA)

1990-01-01T23:59:59.000Z

250

Splayed mirror light pipes  

SciTech Connect (OSTI)

An expression is given for the transmission of the rectangular-section mirror light pipe. The expression is used to model throughputs for simulated solar conditions over a calender year. It is found that the splaying of a mirror light pipe results in a significant increase in throughputs particularly in winter months. (author)

Swift, P.D. [School of Physical Sciences, Dublin City University, Dublin 9 (Ireland)

2010-02-15T23:59:59.000Z

251

Explosively pumped laser light  

DOE Patents [OSTI]

A single shot laser pumped by detonation of an explosive in a shell casing. The shock wave from detonation of the explosive causes a rare gas to luminesce. The high intensity light from the gas enters a lasing medium, which thereafter outputs a pulse of laser light to disable optical sensors and personnel.

Piltch, Martin S. (Los Alamos, NM); Michelotti, Roy A. (Los Alamos, NM)

1991-01-01T23:59:59.000Z

252

Reducing home lighting expenses  

SciTech Connect (OSTI)

Ways to reduce lighting expenses are summarized. These include: turning off lights when not in use; keeping fixtures and lamps clean; replacing lamps with more efficient types; using three-way bulbs; use of daylighting; buying fewer lamps and reducing lamp wattage; consider repainting rooms; replacing recessed fixtures with tracklighting; and using efficient lamps for outdoor use. (MCW)

Aimone, M.A.

1981-02-01T23:59:59.000Z

253

SSL Selections Descriptions v6.xls  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Transparent Conductive Hole Injection Electrode for Organic Light-Emitting Diode (OLED) SSL. This project seeks to develop a cost-effective replacement for...

254

Probing Emissions of Military Cargo Aircraft: Description of...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Emissions of Military Cargo Aircraft: Description of a Joint Field Measurement Strategic Environmental Research and Probing Emissions of Military Cargo Aircraft: Description of a...

255

VIRTUAL LIGHT: DIGITALLY-GENERATED LIGHTING FOR VIDEO CONFERENCING APPLICATIONS  

E-Print Network [OSTI]

VIRTUAL LIGHT: DIGITALLY-GENERATED LIGHTING FOR VIDEO CONFERENCING APPLICATIONS Andrea Basso method to improve the lighting conditions of a real scene or video sequence. In particular we concentrate on modifying real light sources intensities and inserting virtual lights into a real scene viewed from a fixed

Fisher, Kathleen

256

Lighting affects appearance LightSource emits photons  

E-Print Network [OSTI]

1 Lighting affects appearance #12;2 LightSource emits photons Photons travel in a straight line). And then some reach the eye/camera. #12;3 Reflectance Model how objects reflect light. Model light sources Algorithms for computing Shading: computing intensities within polygons Determine what light strikes what

Jacobs, David

257

Generation of a permanent linear electro-optic effect in an optical fiber by poling  

E-Print Network [OSTI]

. The modulated light was detected by a silicon photodiode( SD-100-11- 11-021 ). The junction capacitance of the photodiode is 230pF under 5 volts reversed bias which requires the load resistance to be less than 800kA to achieve a low cutoff frequency of 1 k..., and nv are refrective indies along x and y directions, respec- tively, and &p is a phase constant. The beam transmitted out of the fiber passes through an analyzer before reaching the photodiode. The axis o f the analyzer is adjusted to a, 45 angle...

Hu, Xiaochao

2012-06-07T23:59:59.000Z

258

Structure functions for light nuclei  

SciTech Connect (OSTI)

We discuss the nuclear EMC effect with particular emphasis on recent data for light nuclei including 2H, 3He, 4He, 9Be, 12C and 14N. In order to verify the consistency of available data, we calculate the \\chi^2 deviation between different data sets. We find a good agreement between the results from the NMC, SLAC E139, and HERMES experiments. However, our analysis indicates an overall normalization offset of about 2% in the data from the recent JLab E03-103 experiment with respect to previous data for nuclei heavier than 3He. We also discuss the extraction of the neutron/proton structure function ratio F2n/F2p from the nuclear ratios 3He/2H and 2H/1H. Our analysis shows that the E03-103 data on 3He/2H require a renormalization of about 3% in order to be consistent with the F2n/F2p ratio obtained from the NMC experiment. After such a renormalization, the 3He data from the E03-103 data and HERMES experiments are in a good agreement. Finally, we present a detailed comparison between data and model calculations, which include a description of the nuclear binding, Fermi motion and off-shell corrections to the structure functions of bound proton and neutron, as well as the nuclear pion and shadowing corrections. Overall, a good agreement with the available data for all nuclei is obtained.

S.A. Kulagin, R. Petti

2010-11-01T23:59:59.000Z

259

Energy Star Lighting Verification Program (Program for the Evaluation and Analysis of Residential Lighting)  

SciTech Connect (OSTI)

The Program for the Evaluation and Analysis of Residential Lighting (PEARL) is a watchdog program. It was created in response to complaints received by utility program managers about the performance of certain Energy Star lighting products being promoted within their service territories and the lack of a self-policing mechanism within the lighting industry that would ensure the reliability of these products and their compliance with ENERGY STAR specifications. To remedy these problems, PEARL purchases and tests products that are available to the consumers in the marketplace. The Lighting Research Center (LRC) tests the selected products against the corresponding Energy Star specifications. This report includes the experimental procedure and data results of Cycle Three of PEARL program during the period of October 2002 to April 2003, along with the description of apparatus used, equipment calibration process, experimental methodology, and research findings from the testing. The products tested are 20 models of screw-based compact fluorescent lamps (CFL) of various types and various wattages made or marketed by 12 different manufacturers, and ten models of residential lighting fixtures from eight different manufacturers.

Conan O'Rourke; Yutao Zhou

2006-03-01T23:59:59.000Z

260

EXPLORING THE TIME DISPERSION OF THE IBEX-HI ENERGETIC NEUTRAL ATOM SPECTRA AT THE ECLIPTIC POLES  

SciTech Connect (OSTI)

The Interstellar Boundary Explorer (IBEX) has observed energetic neutral atom (ENA) hydrogen emissions from the edge of the solar system for more than three years. The observations span energies from 0.01 to 6 keV FWHM. At energies greater than 0.5-6 keV, and for a travel distance of {approx}100 AU, the travel time difference between the slowest and the fastest ENA is more than a year. Therefore, we construct spectra including the effect that slower ENAs left the source at an earlier time than faster ones. If the source produces a steady rate of ENAs and the extinction does not vary, then we expect that the spectral shape would be time independent. However, while the extinction of ENAs has been fairly constant during the first two and a half years, the source appears to have changed, and thus the spectra at a single time may not represent the conditions at the source. IBEX's viewing allows continuous sampling of the ecliptic poles where fluxes can be continuously monitored. For a given source distance we construct spectra assuming that the measured ENAs left the source at roughly the same time. To accomplish this construction, we apply time lag corrections to the signal at different ENA energies that take into account the travel time difference. We show that the spectral shape at the poles exhibits a statistically significant change with time.

Allegrini, F.; Dayeh, M. A.; Desai, M. I.; Fuselier, S. A.; McComas, D. J. [Southwest Research Institute, P.O. Drawer 28510, San Antonio, TX 78228 (United States); Bzowski, M.; Kubiak, M. A. [Space Research Centre, Polish Academy of Sciences, Bartycka 18A, 00-716 Warsaw (Poland); DeMajistre, R. [Applied Physics Laboratory, Johns Hopkins University, 11100 Johns Hopkins Road, Laurel, MD 20723 (United States); Funsten, H. O. [Los Alamos National Laboratory, Los Alamos, Bikini Atoll Road, SM 30, NM 87545 (United States); Janzen, P. H.; Reisenfeld, D. B. [Department of Physics and Astronomy, University of Montana, 32 Campus Drive, Missoula, MT (United States); Schwadron, N. [Space Science Center, University of New Hampshire, Morse Hall Room 407, Durham, NH 03824 (United States); Vanderspek, R., E-mail: fallegrini@swri.edu [Massachussetts Institute of Technology, Cambridge, MA 02139 (United States)

2012-04-20T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Green Light Pulse Oximeter  

DOE Patents [OSTI]

A reflectance pulse oximeter that determines oxygen saturation of hemoglobin using two sources of electromagnetic radiation in the green optical region, which provides the maximum reflectance pulsation spectrum. The use of green light allows placement of an oximetry probe at central body sites (e.g., wrist, thigh, abdomen, forehead, scalp, and back). Preferably, the two green light sources alternately emit light at 560 nm and 577 nm, respectively, which gives the biggest difference in hemoglobin extinction coefficients between deoxyhemoglobin, RHb, and oxyhemoglobin, HbO.sub.2.

Scharf, John Edward (Oldsmar, FL)

1998-11-03T23:59:59.000Z

262

White light velocity interferometer  

DOE Patents [OSTI]

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s.

Erskine, David J. (Oakland, CA)

1997-01-01T23:59:59.000Z

263

White light velocity interferometer  

DOE Patents [OSTI]

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

Erskine, D.J.

1997-06-24T23:59:59.000Z

264

White light velocity interferometer  

DOE Patents [OSTI]

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s.

Erskine, David J. (Oakland, CA)

1999-01-01T23:59:59.000Z

265

White light velocity interferometer  

DOE Patents [OSTI]

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

Erskine, D.J.

1999-06-08T23:59:59.000Z

266

Lakeview Light and Power- Commercial Lighting Rebate Program  

Broader source: Energy.gov [DOE]

Lakeview Light and Power offers a commercial lighting rebate program. Rebates apply to the installation of energy efficient lighting retrofits in non-residential buildings. The rebate program is...

267

SURFACE INDUSTRIAL HVAC SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this system description document (SDD) is to establish requirements that drive the design of the surface industrial heating, ventilation, and air-conditioning (HVAC) system and its bases to allow the design effort to proceed to license application. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. The SDD follows the design with regard to the description of the system. The description that provided in this SDD reflects the current results of the design process.

M.M. Ansari

2005-04-05T23:59:59.000Z

268

Description of the RDCDS Meteorological Component  

SciTech Connect (OSTI)

This report provides a detailed description of the Rapidly Deployable Chemical Defense System (RDCDS) Meteorological Component. The Meteorological Component includes four surface meteorological stations, miniSODAR, laptop computers, and communications equipment. This report describes the equipment that is used, explains the operation of the network, and gives instructions for setting up the Component and replacing defective parts. A detailed description of operation and use of the individual sensors, including the data loggers is not covered in the current document, and the interested reader should refer to the manufacturerís documentation.

Pekour, Mikhail S.; Berg, Larry K.

2007-10-01T23:59:59.000Z

269

Light Vector Mesons  

E-Print Network [OSTI]

This article reviews the current status of experimental results obtained in the measurement of light vector mesons produced in proton-proton and heavy ion collisions at different energies. The review is focused on two phenomena related to the light vector mesons; the modification of the spectral shape in search of Chiral symmetry restoration and suppression of the meson production in heavy ion collisions. The experimental results show that the spectral shape of light vector mesons are modified compared to the parameters measured in vacuum. The nature and the magnitude of the modification depends on the energy density of the media in which they are produced. The suppression patterns of light vector mesons are different from the measurements of other mesons and baryons. The mechanisms responsible for the suppression of the mesons are not yet understood. Systematic comparison of existing experimental results points to the missing data which may help to resolve the problem.

Alexander Milov

2008-12-21T23:59:59.000Z

270

National Synchrotron Light Source  

ScienceCinema (OSTI)

A tour of Brookhaven's National Synchrotron Light Source (NSLS). The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviole

None

2010-01-08T23:59:59.000Z

271

Efficient Light Sources Today  

E-Print Network [OSTI]

This paper reviews new lamp and lighting technology in terms of application and economic impact. Included are the latest advances in High Intensity Discharge systems, energy saving fluorescent lamps and ballasts, and the new state of the art high...

Hart, A. L.

1982-01-01T23:59:59.000Z

272

Natural lighting and skylights  

E-Print Network [OSTI]

outlined herein, the feasibility of using scale models for studying skylights is also an established fact. The method of analysis by models can be a valuable tool to any designer who is concerned about day-lighting....

Evans, Benjamin Hampton

1961-01-01T23:59:59.000Z

273

Reading Municipal Light Department- Business Lighting Rebate Program  

Broader source: Energy.gov [DOE]

Reading Municipal Light Department (RMLD) offers incentives for non-residential customers to install energy efficient lights and sensors in existing facilities. In addition to rebates for the...

274

Types of Lighting in Commercial Buildings - Lighting Characteristics  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

of a light source's accuracy in rendering different colors when compared to a reference light source. The highest attainable CRI is 100. Lamps with CRIs above 70 are...

275

Columbia Water and Light- HVAC and Lighting Efficiency Rebates  

Broader source: Energy.gov [DOE]

Columbia Water and Light (CWL) offers rebates to its commercial and industrial customers for the purchase of high efficiency HVAC installations and efficient lighting. Incentives for certain...

276

Induction Lighting: An Old Lighting Technology Made New Again...  

Broader source: Energy.gov (indexed) [DOE]

around the same time that his rival, Thomas Edison, was working to improve the incandescent light bulb. In the early 1990s, several major lighting manufacturers introduced...

277

Peninsula Light Company- Commercial Efficient Lighting Rebate Program  

Broader source: Energy.gov [DOE]

Peninsula Light Company (PLC) offers a rebate program for commercial customers who wish to upgrade to energy efficient lighting. Participating customers must be served by PLC commercial service....

278

Solid state lighting component  

DOE Patents [OSTI]

An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

Yuan, Thomas; Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald

2010-10-26T23:59:59.000Z

279

Solid state lighting component  

DOE Patents [OSTI]

An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald; Yuan, Thomas

2012-07-10T23:59:59.000Z

280

Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER  

E-Print Network [OSTI]

Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER Subject Description Monday, July AND INSURANCE 242 ACTUARIAL SCIENCE 243 TRANSPORTATION AND PUBLIC UTILITIES 244 CLASSICS 250 COMMUNICATION ARTS;Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER Subject Description Monday, July 14, 2014

Wisconsin at Madison, University of

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Standard-C hydrogen monitoring system, system design description  

SciTech Connect (OSTI)

Standard-C cabinet arrangement system design description for the Standard Hydrogen Monitoring System.

Schneider, T.C., Westinghouse Hanford

1996-08-29T23:59:59.000Z

282

Light and Energy -Daylight measurements  

E-Print Network [OSTI]

Light and Energy - Daylight measurements #12;Light and Energy - Daylight measurements Authors: Jens;3 Title Light and Energy Subtitle Daylight measurements Authors Jens Christoffersen, √Āsta Logad√≥ttir ........................................................................................................ 5 Daylight quantity

283

Energy Conservation in Industrial Lighting  

E-Print Network [OSTI]

In order to reduce energy use in lighting Union Carbide recently issued drastically reduced new lighting level standards. A computerized lighting cost program was also developed. Using this program a number of additional energy saving techniques...

Meharg, E.

1979-01-01T23:59:59.000Z

284

Lighting and the Bottom Line  

E-Print Network [OSTI]

A discussion of the cost of light and how it relates to the cost of people. The new Illuminating Engineering Society recommended method of determining lighting levels will be explained. Also several ways of providing good lighting to increase...

Christensen, M.

1981-01-01T23:59:59.000Z

285

Optimization of a two stage light-gas gun  

E-Print Network [OSTI]

. DISCUSSION OF EXPERIMENTS 4. 1 General 4. 2 Description of the Texas A8M Light-Gas Gun. 4. 3 Parametric Tests. 4. 4 Optimization Tests. 4. 5 Experimental Error. V. CONCLUSION REFERENCES. APPENDIX A The Texas A&M Light-Gas Gun Facility. APPENDIX B... to accelerate down the launch tube. Figures (1) and (2) illustrate the components of the gun and the steps in a typical launch cycle. Many factors influence gun performance but these may be grouped into two main categories. First are those dealing with gun...

Rynearson, Richard James

1972-01-01T23:59:59.000Z

286

Light diffusing fiber optic chamber  

DOE Patents [OSTI]

A light diffusion system for transmitting light to a target area. The light is transmitted in a direction from a proximal end to a distal end by an optical fiber. A diffusing chamber is operatively connected to the optical fiber for transmitting the light from the proximal end to the distal end and transmitting said light to said target area. A plug is operatively connected to the diffusing chamber for increasing the light that is transmitted to the target area.

Maitland, Duncan J. (Lafayette, CA)

2002-01-01T23:59:59.000Z

287

QCD and Light-Front Holography  

SciTech Connect (OSTI)

The soft-wall AdS/QCD model, modified by a positive-sign dilaton metric, leads to a remarkable one-parameter description of nonperturbative hadron dynamics. The model predicts a zero-mass pion for zero-mass quarks and a Regge spectrum of linear trajectories with the same slope in the leading orbital angular momentum L of hadrons and the radial quantum number N. Light-Front Holography maps the amplitudes which are functions of the fifth dimension variable z of anti-de Sitter space to a corresponding hadron theory quantized on the light front. The resulting Lorentz-invariant relativistic light-front wave equations are functions of an invariant impact variable {zeta} which measures the separation of the quark and gluonic constituents within the hadron at equal light-front time. The result is to a semi-classical frame-independent first approximation to the spectra and light-front wavefunctions of meson and baryon light-quark bound states, which in turn predict the behavior of the pion and nucleon form factors. The theory implements chiral symmetry in a novel way: the effects of chiral symmetry breaking increase as one goes toward large interquark separation, consistent with spectroscopic data, and the the hadron eigenstates generally have components with different orbital angular momentum; e.g., the proton eigenstate in AdS/QCD with massless quarks has L = 0 and L = 1 light-front Fock components with equal probability. The soft-wall model also predicts the form of the non-perturbative effective coupling {alpha}{sub s}{sup AdS} (Q) and its {beta}-function which agrees with the effective coupling {alpha}{sub g1} extracted from the Bjorken sum rule. The AdS/QCD model can be systematically improved by using its complete orthonormal solutions to diagonalize the full QCD light-front Hamiltonian or by applying the Lippmann-Schwinger method in order to systematically include the QCD interaction terms. A new perspective on quark and gluon condensates is also reviewed.

Brodsky, Stanley J.; /SLAC /Southern Denmark U., CP3-Origins; de Teramond, Guy F.; /Costa Rica U.; ,

2010-10-27T23:59:59.000Z

288

Microscopic description of octupole shape-phase transitions in light actinides and rare-earth nuclei  

E-Print Network [OSTI]

A systematic analysis of low-lying quadrupole and octupole collective states is presented, based on the microscopic energy density functional framework. By mapping the deformation constrained self-consistent axially symmetric mean-field energy surfaces onto the equivalent Hamiltonian of the $sdf$ interacting boson model (IBM), that is, onto the energy expectation value in the boson condensate state, the Hamiltonian parameters are determined. The study is based on the global relativistic energy density functional DD-PC1. The resulting IBM Hamiltonian is used to calculate excitation spectra and transition rates for the positive- and negative-parity collective states in four isotopic chains characteristic for two regions of octupole deformation and collectivity: Th, Ra, Sm and Ba. Consistent with the empirical trend, the microscopic calculation based on the systematics of $\\beta_{2}$-$\\beta_{3}$ energy maps, the resulting low-lying negative-parity bands and transition rates show evidence of a shape transition between stable octupole deformation and octupole vibrations characteristic for $\\beta_{3}$-soft potentials.

K. Nomura; D. Vretenar; T. Niksic; Bing-Nan Lu

2014-02-25T23:59:59.000Z

289

July 18, 2012 Using QECBs for Street Lighting Upgrades  

E-Print Network [OSTI]

lighting technologies (e.g. light-emitting diodes, induction lighting) can reduce street light energy

290

MATLAB Quick Guide Name Description Example  

E-Print Network [OSTI]

MATLAB Quick Guide Symbol/ Command Name Description Example help help Help menu for any command or symbol in MATLAB Help : Help sum % comment MATLAB comment symbol; MATLAB will skip any line beginning for multiplication a = 5 * 5 ; / divide Symbol for division b = 5 / 1 ; ; semi-colon (1) Tells MATLAB to suppress

Smith-Konter, Bridget

291

WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED,  

E-Print Network [OSTI]

DESCRIPTION DETAILS * Radioactive Waste Source Reduction 1,500 Radioactive Waste $6,000 $2,500 $6,000 Waste Yard Sorting Table surveying to sort clean waste from radioactive waste Radioactive Emissions Emission lives. Radioactive Waste generated through wet chemistry Waste Minimization 30 Mixed waste / Liquid

292

Network architecture functional description and design  

SciTech Connect (OSTI)

This report provides a top level functional description and design for the development and implementation of the central network to support the next generation of SNL, Albuquerque supercomputer in a UNIX{reg sign} environment. It describes the network functions and provides an architecture and topology.

Stans, L.; Bencoe, M.; Brown, D.; Kelly, S.; Pierson, L.; Schaldach, C.

1989-05-25T23:59:59.000Z

293

COMMUNITY ADVISOR JOB DESCRIPTION General Statement  

E-Print Network [OSTI]

COMMUNITY ADVISOR JOB DESCRIPTION General Statement Community Advisors are members for their area and the Head Resident. Community Advisors are responsible for meeting the needs of their woodframe is beyond a Community Advisor's level of comfort and competence and refer students to as many resources

Royer, Dana

294

Resident Advisor Position Description Occupational Summary  

E-Print Network [OSTI]

Resident Advisor Position Description Occupational Summary The Resident Advisor (RA) is assigned and Residence Hall policies. The Resident Advisor provides programming based on an assessment of the community and individual needs. The responsibilities of the Resident Advisor position are implemented under the supervision

Bogaerts, Steven

295

Community Advisor Position Description Occupational Summary  

E-Print Network [OSTI]

Community Advisor Position Description Occupational Summary The Community Advisor (CA) is a full success; personal growth; and responsible citizenship. Terms of Appointment The Community Advisor position Monday, May 12, 2014 (5:00pm). Eligibility The Community Advisor must be a full-time student

Bogaerts, Steven

296

FACULTY OF ENGINEERING MODULE DESCRIPTION FORM  

E-Print Network [OSTI]

FACULTY OF ENGINEERING MODULE DESCRIPTION FORM CODE CL508/906 Site Investigation & Risk Assessment-86017-578-2 CIRIA C557 Remedial engineering for closed landfill sites D L Barry, I M Summersgill, R G Gregory et al Module Registrar: Dr P Sentenac Taught To (Course): Civil Engineering Other Lecturers Involved: Credit

Mottram, Nigel

297

EGGN 100 -INTRODUCTION TO ENGINEERING COURSE DESCRIPTION  

E-Print Network [OSTI]

Engineering design project - Continued Week 13 Field Trip to an Engineering site Project reviews, demosEGGN 100 - INTRODUCTION TO ENGINEERING COURSE DESCRIPTION Introduction to engineering disciplines and their sub-fields, basic tools used in engineering practice, hands-on engineering projects. COURSE OBJECTIVE

de Lijser, Peter

298

Sustainable Energy Scheme Mentor Job description  

E-Print Network [OSTI]

1 Sustainable Energy Scheme Mentor Job description Department: Student Administration and Registry and agreement between the Sustainable Energy Scheme Mentor and the UK Student Recruitment and Outreach Team Sustainable Energy Scheme ∑ To participate in both on and off campus mentoring activities throughout

Anderson, Jim

299

Fall 2013 Course Descriptions: For Education Majors  

E-Print Network [OSTI]

will examine how and why pre-modern people distinguished themselves from their neighbors, as Greek/Roman vs, science, and technology. 115 Pre-Modern Course Descriptions: 12053 HIST 115 01 Us vs. Them Constructing Identities in the Pre -Modern World TR 03:05 pm-04:20 pm Buchberger MYBK 302 How we define who we are

Young, Paul Thomas

300

Interns for Indiana (IFI) Project descriptions  

E-Print Network [OSTI]

with the company after graduation, which allows him to work on cutting edge projects, aid in company growthInterns for Indiana (IFI) Projects Project descriptions: · Software development, database design analysis Past student project Development of animated graphics for web portal and product demos -Kevin

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Towards A Mathematical Services Description Olga Caprotti  

E-Print Network [OSTI]

Towards A Mathematical Services Description Language Olga Caprotti Wolfgang Schreiner Research Introduction In the recent years, mathematical software systems, i.e., computer algebra systems like Maple. There are numerous examples in the literature of scien- ti#12;c software needing access to computer algebra methods

302

RECENTER -ADVERSITY INTO TRANSFORMATION Course Description  

E-Print Network [OSTI]

Center" delivers power tools and real time strategies for creating performance transformation ≠ no matter what and practical system for transforming your communication skills from the inside and outside. ∑ Use real timeRECENTER - ADVERSITY INTO TRANSFORMATION Course Description: Knowing how to use adversity

Coles, William A.

303

EES 110: Earth Systems Course Description  

E-Print Network [OSTI]

of energy come from? The course includes laboratory exercises that cover map reading skills, rockEES 110: Earth Systems Course Description: This course examines some of the basic processes (held during normal laboratory meeting times): 1. Rocks & Minerals of Upstate SC: A chance to explore

304

Automatic TLI recognition system, general description  

SciTech Connect (OSTI)

This report is a general description of an automatic target recognition system developed at the Idaho National Engineering Laboratory for the Department of Energy. A user`s manual is a separate volume, Automatic TLI Recognition System, User`s Guide, and a programmer`s manual is Automatic TLI Recognition System, Programmer`s Guide. This system was designed as an automatic target recognition system for fast screening of large amounts of multi-sensor image data, based on low-cost parallel processors. This system naturally incorporates image data fusion, and it gives uncertainty estimates. It is relatively low cost, compact, and transportable. The software is easily enhanced to expand the system`s capabilities, and the hardware is easily expandable to increase the system`s speed. In addition to its primary function as a trainable target recognition system, this is also a versatile, general-purpose tool for image manipulation and analysis, which can be either keyboard-driven or script-driven. This report includes descriptions of three variants of the computer hardware, a description of the mathematical basis if the training process, and a description with examples of the system capabilities.

Lassahn, G.D.

1997-02-01T23:59:59.000Z

305

STUDENT LABOR POSITION DESCRIPTION Forestry Department  

E-Print Network [OSTI]

approved STUDENT LABOR POSITION DESCRIPTION Forestry Department Most Recently Updated 10/17/00 Position Title: Student Forestry Technician Must work 10 hrs/wk. or 15 hrs/wk (depending on grade). I. The following are the essential duties for a Forestry Technician in the Forestry Department: 1. Supervise other

Baltisberger, Jay H.

306

The Genetive and Ablative of Description  

E-Print Network [OSTI]

had not yet become a com≠ mon descriptive case. The statistics for the nouns in Cicero are based on Merguet; those in Tacitus, on Gerber and Greef, Abl. Gen, Abl. Gen. Abl. Gen in in in in in in earlyearlyCfcc--Cic≠ Tac≠ Tac Latin ero ero itus...

Cressman, Edmund Dresser

1911-06-01T23:59:59.000Z

307

Business Development Associate -1493 Job Description  

E-Print Network [OSTI]

Business Development Associate - 1493 Job Description: BioTechnique is a contract manufacturing our Business Development efforts. This will offer a start-up environment, with hands-on opportunities with business development in our consulting, software and investments departments. These new graduates

Evans, Paul G.

308

Business of Fashion Concentration & Minor -Newark Description  

E-Print Network [OSTI]

Business of Fashion Concentration & Minor - Newark Description The Business of Fashion program was designed to bridge the gap between creativity and business acumen. It is for artistic individuals who want to solidify their understanding of business, as well as for business students who want to learn how to apply

Lin, Xiaodong

309

WARREN RESIDENTIAL LIFE RESIDENT ASSISTANT POSITION DESCRIPTION  

E-Print Network [OSTI]

WARREN RESIDENTIAL LIFE RESIDENT ASSISTANT POSITION DESCRIPTION The position of Resident Assistant for students living within the Warren College residential community. Resident Assistant's (RA's) are principle members of the Warren Residential Life staff. In accordance with the University of California's Personnel

Russell, Lynn

310

WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED,  

E-Print Network [OSTI]

WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED, REUSED, RECYCLED OR CONSERVED IN 2004 WASTE TYPE Brake Cleaner Recycling System Mercury Utility Devices Substitution 60 Hazardous Waste $1,750 $2,500 $1 of one PCB spill and clean-up event. Organic Solvents Substitution 678 Hazardous Waste $1,355 $36,500 $26

311

The Ideal Transformer Description and Circuit Symbol  

E-Print Network [OSTI]

The Ideal Transformer Description and Circuit Symbol As with all the other circuit elements, there is a physical transformer commonly used in circuits whose behavior can be discussed in great detail. However, in many cases the practical transformer can be adequately approximated by the "ideal transformer," which

King, Roger

312

DESCRIPTION OF ACCIDENT MSU DRIVERS SIGNATURE  

E-Print Network [OSTI]

DESCRIPTION OF ACCIDENT MSU DRIVERS SIGNATURE Signature 2-9-108, MCA (Statutory Coverage, in lieu-90-(4-20). CERTIFICATE OF INSURANCE X Weather Conditions: ACCIDENT INFORMATION Location: Date: - - 20 Time: : .M. Driver and Risk Management ~ 1160 Research Drive Bozeman, MT 59718 ~ (406) 994-2711 Accident Form #12;OTHER

Dyer, Bill

313

Position Description Website and Video Coordinator  

E-Print Network [OSTI]

, feature content that supports the School's mission and employs best practices (i.e. chunking content, short pages, bulleted list, etc.); follow best practices with search engine optimization; creating clearPosition Description Website and Video Coordinator School of Global Environmental Sustainability

Barnes, Elizabeth A.

314

System design description cone penetrometer system  

SciTech Connect (OSTI)

The system design description documents in detail the design of the cone penetrometer system. The systems includes the cone penetrometer physical package, raman spectroscopy package and moisture sensor package. Information pertinent to the system design, development, fabrication and testing is provided.

Seda, R.Y., Westinghouse Hanford

1996-08-12T23:59:59.000Z

315

Efficiency Maine Residential Lighting Program  

Broader source: Energy.gov [DOE]

Efficiency Maine's Residential Lighting Program works directly with retailers and manufacturers to encourage residential customers to purchase energy-efficient lighting. Rebate amounts average $1...

316

Demonstration Assessment of Light Emitting Diode (LED) Walkway Lighting at the Federal Aviation Administration William J. Hughes Technical Center, in Atlantic City, New Jersey  

SciTech Connect (OSTI)

This report documents the results of a collaborative project to demonstrate a solid state lighting (SSL) general illumination product in an outdoor area walkway application. In the project, six light-emitting diode (LED) luminaires were installed to replace six existing high pressure sodium (HPS) luminaires mounted on 14-foot poles on a set of exterior walkways and stairs at the Federal Aviation Administration (FAA) William J. Hughes Technical Center in Atlantic City, New Jersey, during December, 2007. The effort was a U.S. Department of Energy (DOE) SSL Technology Gateway Demonstration that involved a collaborative teaming agreement between DOE, FAA and Ruud Lighting (and their wholly owned division, Beta LED). Pre- and post-installation power and illumination measurements were taken and used in calculations of energy savings and related economic payback, while personnel impacted by the new lights were provided questionnaires to gauge their perceptions and feedback. The SSL product demonstrated energy savings of over 25% while maintaining illuminance levels and improving illuminance uniformity. PNNL's economic analysis yielded a variety of potential payback results depending on the assumptions used. In the best case, replacing HPS with the LED luminaire can yield a payback as low as 3 years. The new lamps were quite popular with the affected personnel, who gave the lighting an average score of 4.46 out of 5 for improvement.

Kinzey, Bruce R.; Myer, Michael

2008-03-18T23:59:59.000Z

317

Lighting affects appearance LightSource emits photons  

E-Print Network [OSTI]

1 Lighting affects appearance #12;2 LightSource emits photons Photons travel in a straight line). And then some reach the eye/camera. #12;3 Basic fact: Light is linear Double intensity of sources, double photons reaching eye. Turn on two lights, and photons reaching eye are same as sum of number when each

Jacobs, David

318

ECE 466: LED Lighting Systems -Incandescent lightings rise and  

E-Print Network [OSTI]

versus cost - Power Electronic Drives for CFL and LED light sources to achieve dimmable operation - Basic electric AC and DC circuits at Sophomore level or equivalents Absolutes Lighting System Requirements index as a metric of a light source - Power Electronic Energy sources driving light sources in a compact

Schumacher, Russ

319

Lighting and Surfaces 11.1 Introduction to Lighting  

E-Print Network [OSTI]

-object-at-a-time. "Intrinsic" light is the light emitted by the object itself, such as the glow from a TV screen, a light-emitting diode, or a star. "Ambient" light is an illumination that seems to come from all sides. In the real

Boyd, John P.

320

Sandia National Laboratories: White Light Creation Architectures  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

TechnologiesWhite Light Creation Architectures White Light Creation Architectures Overview of SSL White Light Creation Architectures The entire spectral range of visible light can...

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

A Conformal Mapping Based Fractional Order Approach for Sub-optimal Tuning of PID Controllers with Guaranteed Dominant Pole Placement  

E-Print Network [OSTI]

A novel conformal mapping based Fractional Order (FO) methodology is developed in this paper for tuning existing classical (Integer Order) Proportional Integral Derivative (PID) controllers especially for sluggish and oscillatory second order systems. The conventional pole placement tuning via Linear Quadratic Regulator (LQR) method is extended for open loop oscillatory systems as well. The locations of the open loop zeros of a fractional order PID (FOPID or PI{\\lambda}D{\\mu}) controller have been approximated in this paper vis-\\`a-vis a LQR tuned conventional integer order PID controller, to achieve equivalent integer order PID control system. This approach eases the implementation of analog/digital realization of a FOPID controller with its integer order counterpart along with the advantages of fractional order controller preserved. It is shown here in the paper that decrease in the integro-differential operators of the FOPID/PI{\\lambda}D{\\mu} controller pushes the open loop zeros of the equivalent PID cont...

Saha, Suman; Das, Shantanu; Gupta, Amitava

2012-01-01T23:59:59.000Z

322

Pupillary efficient lighting system  

DOE Patents [OSTI]

A lighting system having at least two independent lighting subsystems each with a different ratio of scotopic illumination to photopic illumination. The radiant energy in the visible region of the spectrum of the lighting subsystems can be adjusted relative to each other so that the total scotopic illumination of the combined system and the total photopic illumination of the combined system can be varied independently. The dilation or contraction of the pupil of an eye is controlled by the level of scotopic illumination and because the scotopic and photopic illumination can be separately controlled, the system allows the pupil size to be varied independently of the level of photopic illumination. Hence, the vision process can be improved for a given level of photopic illumination.

Berman, Samuel M. (San Francisco, CA); Jewett, Don L. (Mill Valley, CA)

1991-01-01T23:59:59.000Z

323

Light harvesting arrays  

DOE Patents [OSTI]

A light harvesting array useful for the manufacture of devices such as solar cells comprises: (a) a first substrate comprising a first electrode; and (b) a layer of light harvesting rods electrically coupled to the first electrode, each of the light harvesting rods comprising a polymer of Formula I: X.sup.1.paren open-st.X.sup.m+1).sub.m (I) wherein m is at least 1, and may be from two, three or four to 20 or more; X.sup.1 is a charge separation group (and preferably a porphyrinic macrocycle, which may be one ligand of a double-decker sandwich compound) having an excited-state of energy equal to or lower than that of X.sup.2, and X.sup.2 through X.sup.m+1 are chromophores (and again are preferably porphyrinic macrocycles).

Lindsey, Jonathan S. (Raleigh, NC)

2002-01-01T23:59:59.000Z

324

Light emitting ceramic device  

DOE Patents [OSTI]

A light-emitting ceramic based panel, hereafter termed "electroceramescent" panel, is herein claimed. The electroceramescent panel is formed on a substrate providing mechanical support as well as serving as the base electrode for the device. One or more semiconductive ceramic layers directly overlay the substrate, and electrical conductivity and ionic diffusion are controlled. Light emitting regions overlay the semiconductive ceramic layers, and said regions consist sequentially of a layer of a ceramic insulation layer and an electroluminescent layer, comprised of doped phosphors or the equivalent. One or more conductive top electrode layers having optically transmissive areas overlay the light emitting regions, and a multi-layered top barrier cover comprising one or more optically transmissive non-combustible insulation layers overlay said top electrode regions.

Valentine, Paul; Edwards, Doreen D.; Walker, Jr., William John; Slack, Lyle H.; Brown, Wayne Douglas; Osborne, Cathy; Norton, Michael; Begley, Richard

2010-05-18T23:59:59.000Z

325

Image description. Cover Image End of image description. NATIONAL CENTER FOR EDUCATION STATISTICS  

E-Print Network [OSTI]

a context for examining the data they submitted to IPEDS. Our goal is to produce a report that is useful University 2 #12;Image description. Bar chart with 10 groups with 2 items per group.Y scale titled Percent

Mohaghegh, Shahab

326

Energy Star Lighting Verification Program (Program for the Evaluation and Analysis of Residential Lighting)  

SciTech Connect (OSTI)

The Program for the Evaluation and Analysis of Residential Lighting (PEARL) is a watchdog program. It was created in response to complaints received by utility program managers about the performance of certain Energy Star lighting products being promoted within their service territories and the lack of a self-policing mechanism within the lighting industry that would ensure the reliability of these products and their compliance with ENERGY STAR specifications. To remedy these problems, PEARL purchases and tests products that are available to the consumers in the marketplace. The Lighting Research Center (LRC) tests the selected products against the corresponding Energy Star specifications. This report includes the experimental procedure and data results of Cycle Three and Cycle Four of PEARL program during the period of April 2003 to October 2003, along with the description of apparatus used, equipment calibration process, experimental methodology, and research findings from the testing. The parameter tested for Cycle three is lumen maintenance at 40% rated life, and parameters tested for Cycle Four are all parameters required in Energy Star specifications except lumen maintenance at 40% rated life.

Conan O'Rourke; Yutao Zhou

2006-03-01T23:59:59.000Z

327

Radioluminescent lighting technology  

SciTech Connect (OSTI)

The glow-in-the-dark stereotype that characterizes the popular image of nuclear materials is not accidental. When the French scientist, Henri Becquerel, first discovered radioactivity in 1896, he was interested in luminescence. Radioluminescence, the production of light from a mixture of energetic and passive materials, is probably the oldest practical application of the unstable nucleus. Tritium-based radioluminescent lighting, in spite of the biologically favorable character of the gaseous tritium isotope, was included in the general tightening of environmental and safety regulations. Tritium light manufacturers would have to meet two fundamental conditions: (1) The benefit clearly outweighed the risk, to the extent that even the perceived risk of a skeptical public would be overcome. (2) The need was significant enough that the customer/user would be willing and able to afford the cost of regulation that was imposed both in the manufacture, use and eventual disposal of nuclear materials. In 1981, researchers at Oak Ridge National Laboratory were investigating larger radioluminescent applications using byproduct nuclear material such as krypton-85, as well as tritium. By 1982, it appeared that large source, (100 Curies or more) tritium gas tube, lights might be useful for marking runways and drop zones for military operations and perhaps even special civilian aviation applications. The successful development of this idea depended on making the light bright enough and demonstrating that large gas tube sources could be used and maintained safely in the environment. This successful DOE program is now in the process of being completed and closed-out. Working closely with the tritium light industry, State governments and other Federal agencies, the basic program goals have been achieved. This is a detailed report of what they have learned, proven, and discovered. 91 refs., 29 figs., 5 tabs. (JF)

Not Available

1990-01-01T23:59:59.000Z

328

MANDATORY MEASURES INDOOR LIGHTING CONTROLS  

E-Print Network [OSTI]

MANDATORY MEASURES INDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.1) #12;SECTION 4 MANDATORY LIGHTING CONTROLS 1. 130.1 (a) Area Controls: Manual controls that control lighting in each area separately 2. 130.1 (b) Multi-level Controls: Allow occupants to choose the appropriate light level for each

California at Davis, University of

329

MANDATORY MEASURES INDOOR LIGHTING CONTROLS  

E-Print Network [OSTI]

MANDATORY MEASURES INDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.1) #12;SECTION 3 MANDATORY LIGHTING CONTROLS 1. 130.1 (a) Area Controls: Manual controls that control lighting in each area separately 2. 130.1 (b) Multi-level Controls: "Dimmability." Allow occupants to choose the appropriate light

California at Davis, University of

330

LIGHTING 101 1. Common terminology  

E-Print Network [OSTI]

SECTION 3 LIGHTING 101 1. Common terminology 2. Sources & luminaires 3. Controls #12;SECTION 3SECTION 3 DISCUSSION: COMMON LIGHTING TERMINOLOGY 1. What are the definitions of the following lighting terms? 2. Do you use these terms in professional practice? 3. What other lighting terminology do you use

California at Davis, University of

331

MANDATORY MEASURES INDOOR LIGHTING CONTROLS  

E-Print Network [OSTI]

MANDATORY MEASURES INDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.1) #12;SECTION 5 MANDATORY LIGHTING CONTROLS 1. Area Controls: Manual controls that control lighting in each area separately 2. Multi-level Controls: Allow occupants to choose the appropriate light level for each area 3. Shut

California at Davis, University of

332

LIGHTING 101 1. Common terminology  

E-Print Network [OSTI]

LIGHTING 101 1. Common terminology 2. Sources and luminaires 3. Controls #12;SECTION 2 DISCUSSION: COMMON LIGHTING TERMINOLOGY 1. What are the definitions of the following lighting terms? 2. Do you use these terms in professional practice? 3. What other lighting terminology do you use on the job? SLIDE 14

California at Davis, University of

333

Extreme Ultraviolet Light Chris Cosio  

E-Print Network [OSTI]

Prospectus Extreme Ultraviolet Light Chris Cosio #12;The field of extreme ultraviolet light (XUV to the way XUV interacts with object, XUV properties are difficult to observe. Extreme ultraviolet light is absorbed by all objects it comes in contact with. Furthermore, extreme ultraviolet light also has low

Hart, Gus

334

Structure functions for light nuclei  

SciTech Connect (OSTI)

We discuss the nuclear EMC effect with particular emphasis on recent data for light nuclei including {sup 2}H, {sup 3}He, {sup 4}He, {sup 9}Be, {sup 12}C, and {sup 14}N. In order to verify the consistency of available data, we calculate the {chi}{sup 2} deviation between different data sets. We find a good agreement between the results from the NMC, SLAC E139, and HERMES experiments. However, our analysis indicates an overall normalization offset of about 2% in the data from the recent JLab E03-103 experiment with respect to previous data for nuclei heavier than {sup 3}He. We also discuss the extraction of the neutron/proton structure function ratio F{sub 2}{sup n}/F{sub 2}{sup p} from the nuclear ratios {sup 3}He/{sup 2}H and {sup 2}H/{sup 1}H. Our analysis shows that the E03-103 data on {sup 3}He/{sup 2}H require a renormalization of about 3% in order to be consistent with the F{sub 2}{sup n}/F{sub 2}{sup p} ratio obtained from the NMC experiment. After such a renormalization, the {sup 3}He data from the E03-103 and HERMES experiments are in a good agreement. Finally, we present a detailed comparison between data and model calculations, which include a description of the nuclear binding, Fermi motion, and off-shell corrections to the structure functions of bound proton and neutron, as well as the nuclear pion and shadowing corrections. Overall, a good agreement with the available data for all nuclei is obtained.

Kulagin, S. A. [Institute for Nuclear Research of the Russian Academy of Sciences, 117312 Moscow (Russian Federation); Petti, R. [Department of Physics and Astronomy, University of South Carolina, Columbia, South Carolina 29208 (United States)

2010-11-15T23:59:59.000Z

335

1993 baseline solid waste management system description  

SciTech Connect (OSTI)

Pacific Northwest Laboratory has prepared this report under the direction of Westinghouse Hanford Company. The report provides an integrated description of the system planned for managing Hanford`s solid low-level waste, low-level mixed waste, transuranic waste, and transuranic mixed waste. The primary purpose of this document is to illustrate a collective view of the key functions planned at the Hanford Site to handle existing waste inventories, as well as solid wastes that will be generated in the future. By viewing this system as a whole rather than as individual projects, key facility interactions and requirements are identified and a better understanding of the overall system may be gained. The system is described so as to form a basis for modeling the system at various levels of detail. Model results provide insight into issues such as facility capacity requirements, alternative system operating strategies, and impacts of system changes (ie., startup dates). This description of the planned Hanford solid waste processing system: defines a baseline system configuration; identifies the entering waste streams to be managed within the system; identifies basic system functions and waste flows; and highlights system constraints. This system description will evolve and be revised as issues are resolved, planning decisions are made, additional data are collected, and assumptions are tested and changed. Out of necessity, this document will also be revised and updated so that a documented system description, which reflects current system planning, is always available for use by engineers and managers. It does not provide any results generated from the many alternatives that will be modeled in the course of analyzing solid waste disposal options; such results will be provided in separate documents.

Armacost, L.L.; Fowler, R.A.; Konynenbelt, H.S.

1994-02-01T23:59:59.000Z

336

Inductive Corrections of Action Descriptions Marcello Balduccini  

E-Print Network [OSTI]

description AD is a set of dynamic laws and state constraints1 . A recorded history up to step cT, Hc, its head holds. 1. h(L, T) s law(W), head(W, L), prec h(W, T). % If the preconditions hold and the action occurred, the head holds at the next step. 2. h(L, T + 1) d law(W), head(W, L), prec h(W, T

Zhang, Yuanlin

337

Property:Technology Description | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: EnergyPotentialUrbanUtilityScalePVCapacity Jump to: navigation,WebsiteRenewableBiofuelTechnology Description

338

AN ORIGIN FOR THE SOUTH POLE-AITKEN BASIN THORIUM. V.I. Chikmachev, S.G.Pugacheva, Sternberg State Astronomical institute. Moscow University.  

E-Print Network [OSTI]

AN ORIGIN FOR THE SOUTH POLE-AITKEN BASIN THORIUM. V.I. Chikmachev, S.G.Pugacheva, Sternberg State, that within the limits of the possible Al-Khwarizmi/King basin [3]. The SPA basin thorium map: The using data Lunar Prospector [4] the thorium distribution map demonstrated a hemisphere of the Moon which contains

Chikmachov, Vadim I.

339

SECOND HARMONIC GENERATION OF Bi4Ti3O12 FILMS IN-SITU PROBING OF DOMAIN POLING IN Bi4Ti3O12 THIN  

E-Print Network [OSTI]

SECOND HARMONIC GENERATION OF Bi4Ti3O12 FILMS IN-SITU PROBING OF DOMAIN POLING IN Bi4Ti3O12 THIN FILMS BY OPTICAL SECOND HARMONIC GENERATION YANIV BARAD, VENKATRAMAN GOPALAN Materials Research, of a ferroelectric Bi4Ti3O12 thin film using optical second harmonic generation as a probe. The ferroelectric

Gopalan, Venkatraman

340

SPT-CL J0205Ė5829: A z = 1.32 EVOLVED MASSIVE GALAXY CLUSTER IN THE SOUTH POLE TELESCOPE SUNYAEV-ZELíDOVICH EFFECT SURVEY  

E-Print Network [OSTI]

The galaxy cluster SPT-CL J0205Ė5829 currently has the highest spectroscopically confirmed redshift, z = 1.322, in the South Pole Telescope Sunyaev-Zel'dovich (SPT-SZ) survey. XMM-Newton observations measure a core-excluded ...

Andersoon, K.

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Windows and lighting program  

SciTech Connect (OSTI)

More than 30% of all energy use in buildings is attributable to two sources: windows and lighting. Together they account for annual consumer energy expenditures of more than $50 billion. Each affects not only energy use by other major building systems, but also comfort and productivity -- factors that influence building economics far more than does direct energy consumption alone. Windows play a unique role in the building envelope, physically separating the conditioned space from the world outside without sacrificing vital visual contact. Throughout the indoor environment, lighting systems facilitate a variety of tasks associated with a wide range of visual requirements while defining the luminous qualities of the indoor environment. Windows and lighting are thus essential components of any comprehensive building science program. Despite important achievements in reducing building energy consumption over the past decade, significant additional savings are still possible. These will come from two complementary strategies: (1) improve building designs so that they effectively apply existing technologies and extend the market penetration of these technologies; and (2) develop advanced technologies that increase the savings potential of each application. Both the Windows and Daylighting Group and the Lighting System Research Group have made substantial contributions in each of these areas, and continue to do so through the ongoing research summarized here. 23 refs., 16 figs.

Not Available

1990-06-01T23:59:59.000Z

342

Radioluminescent polymer lights  

SciTech Connect (OSTI)

The preparation of radioluminescent light sources where the tritium is located on the aryl-ring in a polymer has been demonstrated with deuterium/tritium substitution. This report discusses tests, results, and future applications of radioluminescent polymers. 10 refs. (FI)

Jensen, G.A.; Nelson, D.A.; Molton, P.M.

1990-09-01T23:59:59.000Z

343

Sweetness and light  

E-Print Network [OSTI]

1. Sweetness and Light. A novel. Judi lives in a nice, clean house with her seventeen year old stepson, who wonít talk to her in anything but monosyllables. His father, Nelson, and she are struggling to relate to each ...

Craig, Katie

2014-07-03T23:59:59.000Z

344

Studies of the strong and electroweak interactions at the Z{sub 0} pole  

SciTech Connect (OSTI)

This thesis presents studies of the strong and electroweak forces, two of the fundamental interactions that govern the behavior of matter at high energies. The authors have used the hadronic decays of Z{sup 0} bosons produced with the unique experimental apparatus of the e{sup +}e{sup {minus}} Linear Collider at the Stanford Linear Accelerator Center (SLAC) and the SLAC Large Detector (SLD) for these measurements. Employing the precision tracking capabilities of the SLD, they isolated samples of Z{sup 0} events containing primarily the decays of the Z{sup 0} to a chosen quark type. With an inclusive selection technique, they have tested the flavor independence of the strong coupling, {alpha}{sub s} by measuring the rates of multi-jet production in isolated samples of light (uds), c, and b quark events. They find: {alpha}{sub s}{sup uds}/{alpha}{sub s}{sup all} 0.987 {+-} 0.027(stat) {+-} 0.022(syst) {+-} 0.022(theory), {alpha}{sub s}{sup c}/{alpha}{sub s}{sup all} = 1.012 {+-} 0.104(stat) {+-} 0.102(syst) {+-} 0.096(theory), {alpha}{sub s}{sup b}/{alpha}{sub s}{sup all} = 1.026 {+-} 0.041(stat) {+-} 0.030(theory), which implies that the strong interaction is independent of quark flavor within the present experimental sensitivity. They have also measured the extent of parity-violation in the Z{sup 0} c{bar c} coupling, given by the parameter A{sub c}{sup 0}, using a sample of fully and partially reconstructed D* and D{sup +} meson decays and the longitudinal polarization of the SLC electron beam. This sample of charm quark events was derived with selection techniques based on their kinematic properties and decay topologies. They find A{sub c}{sup 0} = 0.73 {+-} 0.22(stat) {+-} 0.10(syst). This value is consistent with that expected in the electroweak standard model of particle interactions.

Hildreth, M.D.

1995-03-01T23:59:59.000Z

345

Design of globally optimal multiple description scalar quantizers  

E-Print Network [OSTI]

This thesis investigates the design of globally optimal multiple description scalar quantizers. The design of multiple description scalar quantizers is formulated as a combinatorial optimization problem due to the index assignment issue. The first...

Desilva, Buveneka Kanishka

2012-06-07T23:59:59.000Z

346

SY101 in situ viscometer instrument system design description  

SciTech Connect (OSTI)

This documents the design and description of the in situ viscometer, developed for the hydrogen mitigation project.

Pearce, K.L.; Stokes, T.I.; Vagelatos, N.

1994-08-18T23:59:59.000Z

347

STEP Energy Coach and Technical Consultant Job Descriptions  

Broader source: Energy.gov [DOE]

STEP Energy Coach and Technical Consultant Job Descriptions, from the Tool Kit Framework: Small Town University Energy Program (STEP).

348

SYLLABUS CH317 Descriptive Inorganic Chemistry  

E-Print Network [OSTI]

. The course has been organized into three modules: 1) Basic skills and the scientific method; 2) Energy. The course does not require students to have extensive prior laboratory experience. As part of the course that include plastics and textiles, and from the formation of low-energy LED light sources to porous materials

349

CFRP Prestressed Concrete Lighting Columns  

E-Print Network [OSTI]

coating on the outer surface to improve the bond properties. The initial prestressing force of each CFRP tendon was 16.6 kN (?p0 = 1í320 N/mm2) corresponding to a total central prestressing force in the pole of 100 kN (at prestress transfer... its rotation onto a M10 nut via a chain-gear (see Figure 4). The electric motor was driven by a potentiometer, from where the rotation (loading) speed and the loading direction could be controlled by the testing engineer. The pulling load...

Terrasi, Giovanni P.; Lees, Janet M.

2003-08-01T23:59:59.000Z

350

Incremental Machine Descriptions for GCC Sameera Deshpande Uday P. Khedker  

E-Print Network [OSTI]

Incremental Machine Descriptions for GCC Sameera Deshpande Uday P. Khedker Indian Institute of Technology, Bombay {sameera,uday}@cse.iitb.ac.in Abstract The mechanism of providing machine descriptions a GCC port exists. However, this mechanism is quite ad hoc and the machine descriptions are dif- ficult

Khedker, Uday

351

Nonequilibrium lighting plasmas  

SciTech Connect (OSTI)

In this paper the science of a variety of devices employing nonequilibrium lighting plasmas is reviewed. The devices include the fluorescent lamp, the low-pressure sodium lamp, the neon sign, ultraviolet lamps, glow indicators, and a variety of devices used by spectroscopists, such as the hollow cathode light source. The plasma conditions in representative commercial devices are described. Recent research on the electron gas, the role of heavy particles, spatial and temporal inhomogeneities, and new electrodeless excitation schemes is reviewed. Areas of future activity are expected to be in new applications of high-frequency electronics to commercial devices, new laser-based diagnostics of plasma conditions, and more sophisticated models requiring more reliable and extensive rate coefficient data.

Dakin, J.T. (GE Lighting, Nela Park, Cleveland, OH (US))

1991-12-01T23:59:59.000Z

352

Light cone matrix product  

SciTech Connect (OSTI)

We show how to combine the light-cone and matrix product algorithms to simulate quantum systems far from equilibrium for long times. For the case of the XXZ spin chain at {Delta} = 0.5, we simulate to a time of {approx} 22.5. While part of the long simulation time is due to the use of the light-cone method, we also describe a modification of the infinite time-evolving bond decimation algorithm with improved numerical stability, and we describe how to incorporate symmetry into this algorithm. While statistical sampling error means that we are not yet able to make a definite statement, the behavior of the simulation at long times indicates the appearance of either 'revivals' in the order parameter as predicted by Hastings and Levitov (e-print arXiv:0806.4283) or of a distinct shoulder in the decay of the order parameter.

Hastings, Matthew B [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

353

OLEDS FOR GENERAL LIGHTING  

SciTech Connect (OSTI)

The goal of this program was to reduce the long term technical risks that were keeping the lighting industry from embracing and developing organic light-emitting diode (OLED) technology for general illumination. The specific goal was to develop OLEDs for lighting to the point where it was possible to demonstrate a large area white light panel with brightness and light quality comparable to a fluorescence source and with an efficacy comparable to that of an incandescent source. it was recognized that achieving this would require significant advances in three area: (1) the improvement of white light quality for illumination, (2) the improvement of OLED energy efficiency at high brightness, and (3) the development of cost-effective large area fabrication techniques. The program was organized such that, each year, a ''deliverable'' device would be fabricated which demonstrated progress in one or more of the three critical research areas. In the first year (2001), effort concentrated on developing an OLED capable of generating high illumination-quality white light. Ultimately, a down-conversion method where a blue OLED was coupled with various down-conversion layers was chosen. Various color and scattering models were developed to aid in material development and device optimization. The first year utilized this approach to deliver a 1 inch x 1 inch OLED with higher illumination-quality than available fluorescent sources. A picture of this device is shown and performance metrics are listed. To their knowledge, this was the first demonstration of true illumination-quality light from an OLED. During the second year, effort concentrated on developing a scalable approach to large area devices. A novel device architecture consisting of dividing the device area into smaller elements that are monolithically connected in series was developed. In the course of this development, it was realized that, in addition to being scalable, this approach made the device tolerant to the most common OLED defect--electrical shorts. This architecture enabled the fabrication of a 6 inch x 6 inch OLED deliverable for 2002. A picture of this deliverable is shown and the performance metrics are listed. At the time, this was the highest efficiency, highest lumen output illumination-quality OLED in existence. The third year effort concentrated on improving the fabrication yield of the 6 inch x 6 inch devices and improving the underlying blue device efficiency. An efficiency breakthrough was achieved through the invention of a new device structure such that now 15 lumen per watt devices could be fabricated. A 2 feet x 2 feet OLED panel consisting of sixteen 6 inch x 6 inch high efficiency devices tiled together was then fabricated. Pictures of this panel are shown with performance metrics listed. This panel met all project objectives and was the final deliverable for the project. It is now the highest efficiency, highest lumen output, illumination-quality OLED in existence.

Anil Duggal; Don Foust; Chris Heller; Bill Nealon; Larry Turner; Joe Shiang; Nick Baynes; Tim Butler; Nalin Patel

2004-02-29T23:59:59.000Z

354

Fusion pumped light source  

DOE Patents [OSTI]

Apparatus is provided for generating energy in the form of light radiation. A fusion reactor is provided for generating a long, or continuous, pulse of high-energy neutrons. The neutron flux is coupled directly with the lasing medium. The lasing medium includes a first component selected from Group O of the periodic table of the elements and having a high inelastic scattering cross section. Gamma radiation from the inelastic scattering reactions interacts with the first component to excite the first component, which decays by photon emission at a first output wavelength. The first output wavelength may be shifted to a second output wavelength using a second liquid component responsive to the first output wavelength. The light outputs may be converted to a coherent laser output by incorporating conventional optics adjacent the laser medium.

Pappas, Daniel S. (Los Alamos, NM)

1989-01-01T23:59:59.000Z

355

Demonstration Assessment of Light-Emitting Diode (LED) Parking Lot Lighting in Leavenworth, KS  

SciTech Connect (OSTI)

This report describes the process and results of a demonstration of solid-state lighting (SSL) technology in a commercial parking lot lighting application, under the U.S. Department of Energy (DOE) Solid-State Lighting Technology GATEWAY Demonstration Program. The parking lot is for customers and employees of a Walmart Supercenter in Leavenworth, Kansas and this installation represents the first use of the LED Parking Lot Performance Specification developed by the DOEís Commercial Building Energy Alliance. The application is a parking lot covering more than a half million square feet, lighted primarily by light-emitting diodes (LEDs). Metal halide wall packs were installed along the building facade. This site is new construction, so the installed baseline(s) were hypothetical designs. It was acknowledged early on that deviating from Walmartís typical design would reduce the illuminance on the site. Walmart primarily uses 1000W pulse-start metal halide (PMH) lamps. In order to provide a comparison between both typical design and a design using conventional luminaires providing a lower illuminance, a 400W PMH design was also considered. As mentioned already, the illuminance would be reduced by shifting from the PMH system to the LED system. The Illuminating Engineering Society of North America (IES) provides recommended minimum illuminance values for parking lots. All designs exceeded the recommended illuminance values in IES RP-20, some by a wider margin than others. Energy savings from installing the LED system compared to the different PMH systems varied. Compared to the 1000W PMH system, the LED system would save 63 percent of the energy. However, this corresponds to a 68 percent reduction in illuminance as well. In comparison to the 400W PMH system, the LED system would save 44 percent of the energy and provide similar minimum illuminance values at the time of relamping. The LED system cost more than either of the PMH systems when comparing initial costs. However, when the life-cycle costs from energy and maintenance were factored into the scenario, the LED system had lower costs at the end of a 10-year analysis period. The LED system had a 6.1 year payback compared to the 1000W PMH system and a 7.5 year payback versus the 400W PMH system. The costs reflect high initial cost for the LED luminaire, plus more luminaires and (subsequently) more poles for the LED system. The other major issue affecting cost effectiveness was that Leavenworth, Kansas has very low electricity costs. The melded rate for this site was $0.056 per kWh for electricity. However, if the national electricity rate of $0.1022/kWh was used the payback would change to between four and five years for the LED system. This demonstration met the GATEWAY requirements of saving energy, matching or improving illumination, and being cost effective. The project also demonstrated that the Commercial Building Energy Alliance (CBEA) specification works in practice. Walmart appreciated having an entire site lighted by LEDs to gain more experience with the technology. Walmart is reviewing the results of the demonstration as they consider their entire real estate portfolio.

Myer, Michael; Kinzey, Bruce R.; Curry, Ku'uipo

2011-05-06T23:59:59.000Z

356

Turbo-Charged Lighting Design  

E-Print Network [OSTI]

TURBO-CHARGED LIGHTING DESIGN William H. Clark II Design Engineer O'Connell Robertson & Assoc Austin/ Texas ABSTRACT The task of the lighting designer has become very complex, involving thousands of choices for fixture types and hundreds...

Clark, W. H. II

357

Faster than Light Quantum Communication  

E-Print Network [OSTI]

Faster than light communication might be possible using the collapse of the quantum wave-function without any accompanying paradoxes.

A. Y. Shiekh

2008-04-05T23:59:59.000Z

358

Webinar: Fuel Cell Mobile Lighting  

Broader source: Energy.gov [DOE]

Video recording of the Fuel Cell Technologies Office webinar, Fuel Cell Mobile Lighting, originally presented on November 13, 2012.

359

Photodetector with enhanced light absorption  

DOE Patents [OSTI]

A photodetector including a light transmissive electrically conducting layer having a textured surface with a semiconductor body thereon. This layer traps incident light thereby enhancing the absorption of light by the semiconductor body. A photodetector comprising a textured light transmissive electrically conducting layer of SnO.sub.2 and a body of hydrogenated amorphous silicon has a conversion efficiency about fifty percent greater than that of comparative cells. The invention also includes a method of fabricating the photodetector of the invention.

Kane, James (Lawrenceville, NJ)

1985-01-01T23:59:59.000Z

360

A new HST/Herschel deep field at the North Ecliptic Pole: preparing the way for JWST, SPICA and Euclid  

E-Print Network [OSTI]

We propose a co-ordinated multi-observatory survey at the North Ecliptic Pole. This field is the natural extragalactic deep field location for most space observatories (e.g. containing the deepest Planck, WISE and eROSITA data), is in the continuous viewing zones for e.g. Herschel, HST, JWST, and is a natural high-visibility field for the L2 halo orbit of SPICA with deep and wide-field legacy surveys already planned. The field is also a likely deep survey location for the forthcoming Euclid mission. It is already a multi-wavelength legacy field in its own right (e.g. AKARI, LOFAR, SCUBA-2): the outstanding and unparalleled continuous mid-IR photometric coverage in this field and nowhere else enables a wide range of galaxy evolution diagnostics unachievable in any other survey field, by spanning the wavelengths of redshifted PAH and silicate features and the peak energy output of AGN hot dust. We argue from the science needs of Euclid and JWST, and from the comparative multiwavelength depths, that the logical ...

Serjeant, Stephen; Burgarella, Denis; Clements, Dave; De Zotti, Gianfranco; Goto, Tomo; Hatsukade, Bunyo; Hopwood, Rosalind; Hwang, Narae; Inami, Hanae; Jeong, Woong-Seob; Kim, Seong Jin; Krumpe, Mirko; Lee, Myung Gyoon; Malkan, Matt; Matsuhara, Hideo; Miyaji, Takamitsu; Oyabu, Shinki; Pearson, Chris; Takeuchi, Tsutomu; Vaccari, Mattia; Valtchanov, Ivan; van der Werf, Paul; Wada, Takehiko; White, Glenn

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

A Medium-Deep Survey of a Mini-Slice at the North Galactic Pole. II. The Data  

E-Print Network [OSTI]

We report 328 redshifts, b$_J$ magnitudes and b$_J$--r$_F$ colors of galaxies measured in a redshift survey of a 4$^\\circ$ $\\times$ 0.67$^\\circ$ slice close to the north Galactic pole. The faintest galaxies in this survey have a magnitude of b$_J$ $\\sim$ 20.5. The redshifts present external errors of the order of 70 \\kms, and we estimate that the mean photometry errors are $\\sim$ 0.2 for magnitudes and $\\sim$ 0.3 for colors. The redshift completeness level of the sample is of the order of $\\sim$ 35\\% at b$_J$=20, and part of this rather low completeness is the result of the combination of limitations imposed by the multifiber system with the clustering of galaxies, and an insufficient number of configurations. At the nominal magnitude limit of the survey, we were able to measure redshifts for $\\sim$ 70 \\% of the galaxies we observed. From the correlation between observed properties of the galaxies in this sample, we demonstrate that the mean surface brightness is a major limiting factor in our ability to measure redshifts of faint objects.

C. N. A. Willmer; D. C. Koo; N. ELlman; M. J. Kurtz; A. S. Szalay

1996-06-12T23:59:59.000Z

362

Multi-fluid Modeling of Transient a Case Study in the Generation and Guiding of Light  

E-Print Network [OSTI]

Multi-fluid Modeling of Transient Plasmas: a Case Study in the Generation and Guiding of Light, B.H.P. Multi-fluid Modeling of Transient Plasmas: a Case Study in the Generation and Guid- ing . . . . . . . . . . . . . . . . . . . . . . . . 37 2.3.1 The multi-fluid description in PLASIMO . . . . . . . . . . . . . . . . 38 iii #12;iv

Eindhoven, Technische Universiteit

363

MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS  

E-Print Network [OSTI]

MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.2) #12;SECTION level of each multi-tier garage. · General lighting must have occupant sensing controls with at least one control step between 20% and 50% of design lighting power · No more than 500 watts of rated

California at Davis, University of

364

MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS  

E-Print Network [OSTI]

MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.2) #12;SECTION 5 Additions and Alterations Any alteration that increases the connected lighting load must meet all No measures required OUTDOOR LIGHTING11/20/2014 #12;SECTION 5 BACKLIGHT, UPLIGHT, AND GLARE (BUG) RATINGS

California at Davis, University of

365

MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS  

E-Print Network [OSTI]

MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.2) #12;SECTION performance in relation to lighting trespass, sky glow, and high angle brightness. This is necessary in order to reduce light pollution, which has a negative effect on wildlife and the surrounding environments

California at Davis, University of

366

Arnold Schwarzenegger, LIGHTING RESEARCH PROGRAM  

E-Print Network [OSTI]

;#12;Prepared By: Lighting Research Center Andrew Bierman, Project Lead Troy, New York 12180 Managed ByArnold Schwarzenegger, Governor LIGHTING RESEARCH PROGRAM PROJECT 3.2 ENERGY EFFICIENT LOAD- SHEDDING LIGHTING TECHNOLOGY Prepared For: California Energy Commission Public Interest Energy Research

367

STATE OF CALIFORNIA RESIDENTIAL LIGHTING  

E-Print Network [OSTI]

STATE OF CALIFORNIA RESIDENTIAL LIGHTING CEC-CF-6R-LTG-01 (Revised 08/09) CALIFORNIA ENERGY COMMISSION INSTALLATION CERTIFICATE CF-6R-LTG-01 Residential Lighting (Page 1 of 6) Site Address: Enforcement Agency: Permit Number: 2008 Residential Compliance Forms August 2009 1. Kitchen Lighting Does project

368

Light-Front Holography and Non-Perturbative QCD  

SciTech Connect (OSTI)

The combination of Anti-de Sitter space (AdS) methods with light-front holography leads to a semi-classical first approximation to the spectrum and wavefunctions of meson and baryon light-quark bound states. Starting from the bound-state Hamiltonian equation of motion in QCD, we derive relativistic light-front wave equations in terms of an invariant impact variable {zeta} which measures the separation of the quark and gluonic constituents within the hadron at equal light-front time. These equations of motion in physical space-time are equivalent to the equations of motion which describe the propagation of spin-J modes in anti-de Sitter (AdS) space. Its eigenvalues give the hadronic spectrum, and its eigenmodes represent the probability distribution of the hadronic constituents at a given scale. Applications to the light meson and baryon spectra are presented. The predicted meson spectrum has a string-theory Regge form M{sup 2} = 4{kappa}{sup 2}(n + L + S = 2); i.e., the square of the eigenmass is linear in both L and n, where n counts the number of nodes of the wavefunction in the radial variable {zeta}. The space-like pion form factor is also well reproduced. One thus obtains a remarkable connection between the description of hadronic modes in AdS space and the Hamiltonian formulation of QCD in physical space-time quantized on the light-front at fixed light-front time {tau}. The model can be systematically improved by using its complete orthonormal solutions to diagonalize the full QCD light-front Hamiltonian or by applying the Lippmann-Schwinger method in order to systematically include the QCD interaction terms.

Brodsky, Stanley J.; /SLAC; de Teramond, Guy F.; /Costa Rica U.

2009-12-09T23:59:59.000Z

369

Pedestrian Friendly Outdoor Lighting  

SciTech Connect (OSTI)

This GATEWAY report discusses the problems of pedestrian lighting that occur with all technologies with a focus on the unique optical options and opportunities offered by LEDs through the findings from two pedestrian-focused projects, one at Stanford University in California, and one at the Chautauqua Institution in upstate New York. Incorporating user feedback this report reviews the tradeoffs that must be weighed among visual comfort, color, visibility, efficacy and other factors to stimulate discussion among specifiers, users, energy specialists, and in industry in hopes that new approaches, metrics, and standards can be developed to support pedestrian-focused communities, while reducing energy use.

Miller, Naomi J.; Koltai, Rita; McGowan, Terry

2013-12-31T23:59:59.000Z

370

Advances in Lighting  

E-Print Network [OSTI]

colour rendition. The quartz-halogen incandescent lam s operate at higher temperatures, and have a somewhat higher efficacy, but they are rarely used except for special applicati ns. 3-2 High Intensity Discharge Lamps. Mercury is the grandfather... of the H.I.D. lamps. Its blue-green light, has been used almost exclusively for streetlighti and, often with colour-improving phospho it is still being used in industrial and commercial applications. Reactor-type ballasted mercury lamps can now...

Tumber, A. J.

1981-01-01T23:59:59.000Z

371

Lights, Conformational Change... Action!  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 LawrenceEfeedstocksHomesLighting the

372

Lighting | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Powerstories on climateJuno Beach,October,Lighthouse Solar Jump to:Lighting Jump

373

Ecological Consequences of Artificial Night Lighting  

E-Print Network [OSTI]

of Artificial Night Lighting Catherine Rich and Travisof artificial night lighting. This book provides editedage of modern urban lighting was ushered in. Coincidentally,

Piselli, Kathy

2006-01-01T23:59:59.000Z

374

LIGHTING CONTROLS: SURVEY OF MARKET POTENTIAL  

E-Print Network [OSTI]

REFERENCES Task Report to Lighting Systems Research,Berkeley Laboratory, "Lighting Control System Market1980). Task Report to Lighting Systems Research, Lawrence

Verderber, R.R.

2010-01-01T23:59:59.000Z

375

Demand Responsive Lighting: A Scoping Study  

E-Print Network [OSTI]

3 3.0 Previous Experience with Demand Responsive Lighting11 4.3. Prevalence of Lighting13 4.4. Impact of Title 24 on Lighting

Rubinstein, Francis; Kiliccote, Sila

2007-01-01T23:59:59.000Z

376

Municipal Consortium LED Street Lighting Workshop Presentations...  

Broader source: Energy.gov (indexed) [DOE]

A Rational View of LM-79 Reports, IES Files, and Product Variation Gary Steinberg, GE Lighting Solutions Solid-State Street Lighting: Calculating Light Loss Factors Dana Beckwith,...

377

Municipal Consortium LED Street Lighting Workshop Presentations...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

National Association of Energy Services Companies Calculating Light Loss Factors for Solid-State Lighting Systems Chad Stalker, Philips Lumileds Lighting Intro to MSSLC's...

378

Sandia National Laboratories: Light Creation Materials  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

TechnologiesLight Creation Materials Light Creation Materials Overview of SSL Light Creation Materials Different families of inorganic semiconductor materials can...

379

Photon echo studies of photosynthetic light harvesting  

E-Print Network [OSTI]

of the B800-B820 light-harvesting complex. Proc Natl Acadphotosynthetic light harvesting Elizabeth L. Read ∆ Hohjaitransfer events in light harvesting. Here, we outline the

Read, Elizabeth L.; Lee, Hohjai; Fleming, Graham R.

2009-01-01T23:59:59.000Z

380

Sandia National Laboratories: Light Creation Materials  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

EFRCOverviewLight Creation Materials Light Creation Materials Overview of SSL Light Creation Materials Different families of inorganic semiconductor materials can contribute to...

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Collective phase description of oscillatory convection  

SciTech Connect (OSTI)

We formulate a theory for the collective phase description of oscillatory convection in Hele-Shaw cells. It enables us to describe the dynamics of the oscillatory convection by a single degree of freedom which we call the collective phase. The theory can be considered as a phase reduction method for limit-cycle solutions in infinite-dimensional dynamical systems, namely, stable time-periodic solutions to partial differential equations, representing the oscillatory convection. We derive the phase sensitivity function, which quantifies the phase response of the oscillatory convection to weak perturbations applied at each spatial point, and analyze the phase synchronization between two weakly coupled Hele-Shaw cells exhibiting oscillatory convection on the basis of the derived phase equations.

Kawamura, Yoji, E-mail: ykawamura@jamstec.go.jp [Institute for Research on Earth Evolution, Japan Agency for Marine-Earth Science and Technology, Yokohama 236-0001 (Japan)] [Institute for Research on Earth Evolution, Japan Agency for Marine-Earth Science and Technology, Yokohama 236-0001 (Japan); Nakao, Hiroya [Department of Mechanical and Environmental Informatics, Tokyo Institute of Technology, Tokyo 152-8552 (Japan)] [Department of Mechanical and Environmental Informatics, Tokyo Institute of Technology, Tokyo 152-8552 (Japan)

2013-12-15T23:59:59.000Z

382

Wigner-function description of EPR experiment  

E-Print Network [OSTI]

We provide a detailed description of the EPR paradox (in the Bohm version) for a two qubit-state in the discrete Wigner function formalism. We compare the probability distributions for two qubit relevant to simultaneously-measurable observables (computed from the Wigner function) with the probability distributions representing two perfectly-correlated classic particles in a discrete phase-space. We write in both cases the updating formulae after a measure, thus obtaining a mathematical definition of \\textit{classic collapse} and \\textit{quantum collapse}. We study, with the EPR experiment, the joint probability distributions of Alice's and Bob's qubit before and after the measure, analyzing the non-local effects. In particular, we give a more precise definition of locality, which we call m-locality: we show that quantum systems may violate this kind of locality, thus preserving, in an EPR-like argument, the completeness of Quantum Mechanics.

Riccardo Franco

2007-01-12T23:59:59.000Z

383

ASYMMETRY IN THE OUTBURST OF SN 1987A DETECTED USING LIGHT ECHO SPECTROSCOPY  

SciTech Connect (OSTI)

We report direct evidence for asymmetry in the early phases of SN 1987A via optical spectroscopy of five fields of its light echo system. The light echoes allow the first few hundred days of the explosion to be reobserved, with different position angles providing different viewing angles to the supernova. Light echo spectroscopy therefore allows a direct spectroscopic comparison of light originating from different regions of the photosphere during the early phases of SN 1987A. Gemini multi-object spectroscopy of the light echo fields shows fine structure in the H{alpha} line as a smooth function of position angle on the near-circular light echo rings. H{alpha} profiles originating from the northern hemisphere of SN 1987A show an excess in redshifted emission and a blue knee, while southern hemisphere profiles show an excess of blueshifted H{alpha} emission and a red knee. This fine structure is reminiscent of the 'Bochum event' originally observed for SN 1987A, but in an exaggerated form. Maximum deviation from symmetry in the H{alpha} line is observed at position angles 16 Degree-Sign and 186 Degree-Sign , consistent with the major axis of the expanding elongated ejecta. The asymmetry signature observed in the H{alpha} line smoothly diminishes as a function of viewing angle away from the poles of the elongated ejecta. We propose an asymmetric two-sided distribution of {sup 56}Ni most dominant in the southern far quadrant of SN 1987A as the most probable explanation of the observed light echo spectra. This is evidence that the asymmetry of high-velocity {sup 56}Ni in the first few hundred days after explosion is correlated to the geometry of the ejecta some 25 years later.

Sinnott, B.; Welch, D. L.; Sutherland, P. G. [Department of Physics and Astronomy, McMaster University, Hamilton, Ontario L8S 4M1 (Canada)] [Department of Physics and Astronomy, McMaster University, Hamilton, Ontario L8S 4M1 (Canada); Rest, A. [Space Telescope Science Institute, Baltimore, MD 21218 (United States)] [Space Telescope Science Institute, Baltimore, MD 21218 (United States); Bergmann, M.

2013-04-10T23:59:59.000Z

384

Monitored Geologic Repository Project Description Document  

SciTech Connect (OSTI)

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (CRWMS M&O 2000b) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) engineering design basis in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The engineering design basis documented in the PDD is to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the engineering design basis from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the engineering design basis captured in the SDDs and the design requirements captured in U.S. Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M&O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 2-1, the MGR Architecture (Section 4.1),the Engineering Design Bases (Section 5), and the Controlled Project Assumptions (Section 6).

P. Curry

2000-06-01T23:59:59.000Z

385

Monitored Geologic Repository Project Description Document  

SciTech Connect (OSTI)

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the Yucca Mountain Site Characterization Project Requirements Document (YMP RD) (YMP 2001a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M&O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).

P. Curry

2001-06-26T23:59:59.000Z

386

Monitored Geologic Repository Project Description Document  

SciTech Connect (OSTI)

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (YMP 2000a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).

P. M. Curry

2001-01-30T23:59:59.000Z

387

Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting at the I-35W Bridge, Minneapolis, MN  

SciTech Connect (OSTI)

This report describes the process and results of a demonstration of solid-state lighting (SSL) technology conducted in 2009 at the recently reconstructed I-35W bridge in Minneapolis, MN. The project was supported under the U.S. Department of Energy (DOE) Solid-State Lighting GATEWAY Technology Demonstration Program. Other participants in the demonstration project included the Minnesota Department of Transportation (Mn/DOT), Federal Highways Administration (FHWA), and BetaLEDô (a division of Ruud Lighting). Pacific Northwest National Laboratory (PNNL) conducted the measurements and analysis of the results. DOE has implemented a three-year evaluation of the LED luminaires in this installation in order to develop new longitudinal field data on LED performance in a challenging, real-world environment. This document provides information through the initial phase of the I-35W bridge project, up to and including the opening of the bridge to the public and the initial feedback received on the LED lighting installation from bridge users. Initial findings of the evaluation are favorable, with minimum energy savings level of 13% for the LED installation relative to the simulated base case using 250W high-pressure sodium (HPS) fixtures. The LEDs had an average illuminance level of 0.91 foot candles compared to 1.29 fc for the HPS lamps. The LED luminaires cost $38,000 more than HPS lamps, yielding a lengthy payback period, however the bridge contractor had offered to include the LED luminaires as part of the construction package at no additional cost. One potentially significant benefit of the LEDs in this installation is avoiding rolling lane closures on the heavily-traveled interstate bridge for the purpose of relamping the HPS fixtures. Rolling lane closures involve multiple crew members and various maintenance and safety vehicles, diversion of traffic, as well as related administrative tasks (e.g., approvals, scheduling, etc.). Mn/DOT records show an average cost of relamping fixtures along interstate roadways of between $130-150 per pole. The previous bridge saw a lamp mortality rate of approximately 50% every two years, though the new bridge was designed to minimize many of the vibration issues. A voluntary Web-based feedback survey of nearly 500 self-described bridge users showed strong preference for the LED lighting - positive comments outnumbered negative ones by about five-to-one.

Kinzey, Bruce R.; Myer, Michael

2009-08-31T23:59:59.000Z

388

Energy Savings Estimates of Light Emitting Diodes in Niche Lighting...  

Office of Environmental Management (EM)

in Niche Lighting Applications Prepared for: Building Technologies Program Office of Energy Efficiency and Renewable Energy U.S. Department of Energy Prepared by: Navigant...

389

Light modulating device  

DOE Patents [OSTI]

In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity.

Rauh, R. David (Newton, MA); Goldner, Ronald B. (Lexington, MA)

1989-01-01T23:59:59.000Z

390

Light modulating device  

DOE Patents [OSTI]

In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity are disclosed. 1 fig.

Rauh, R.D.; Goldner, R.B.

1989-12-26T23:59:59.000Z

391

Energy and lighting  

SciTech Connect (OSTI)

Advances in research for new types of lighting with increased efficacies (lumens/watt) are discussed in the following areas: (1) high-frequency, solid-state ballasts, (2) isotopic enhancement of mercury isotopes, (3) magnetic augmentation, (4) electrodeless, ultra-high frequency, (5) tuned phosphors, (6) two-photon phosphors, (7) heat mirrors, and (3) advanced control circuits to take advantage of daylight and occupancy. As of 1985, improvements in efficacy have been accomplished on an economic basis to save energy for (1) high-frequency ballasts (25%), (2) isotopic enhancement (5%), and (8) advanced control circuits (up to 50%). Most of these advances depend on a deeper understanding of the weakly ionized plasma as a radiating and diffusing medium. 3 figures, 4 tables.

Berman, S.

1985-01-01T23:59:59.000Z

392

Cost effective lighting  

SciTech Connect (OSTI)

Long-life replacement lamps for the incandescent lamp have been evaluated with regard to their cost effectiveness. The replacements include the use of energy buttons that extend lamp life as well as an adaptive fluorescent circline lamp that will fit into existing incandescent lamp sockets. The initial, operating, and replacement costs for one million lumen-hours are determined for each lamp system. We find the most important lighting cost component is the operating cost. Using lamps that are less efficient or devices that cause lamps to operate less efficiently are not cost-effective. The adaptive fluorescent circline lamp, even at an initial cost of $15.00, is the most cost effective source of illumination compared to the incandescent lamp and lamp systems examined. 3 refs., 6 tabs.

Morse, O.; Verderber, R.

1987-07-01T23:59:59.000Z

393

Posters | Posters --721 Exploring lighting cultures  

E-Print Network [OSTI]

Posters | Posters -- 721 Exploring lighting cultures Beyond light and emotions Vincent LAGANIER 1 , Jasmine van der POL 2 1. Lighting Applications Services (LiAS), Philips Lighting, France vincent.laganier@philips.com 2

Boyer, Edmond

394

Creative and Constructive Play with Light  

E-Print Network [OSTI]

children identify objects with these properties. Predict what materials light will pass through. Use paint and mixing light. Mixing paint creates a muddy brown or black. Mixing light creates white light

395

A STATE VARIABLE DESCRIPTION OF THE RHIC RF CONTROL LOOPS.  

SciTech Connect (OSTI)

The beam transfer function changes during the RHIC ramp. The response of the RF control loops changes as a result. A state-variable description of the beam and the RF control loops was developed. This description was used to generate a set of feedback matrices that keeps the response of the RF control loops constant during the ramp. This paper describes the state-variable description and its use in determining the K matrices.

SCHULTHEISS,C.; BRENNAN,J.M.

2002-06-02T23:59:59.000Z

396

Probing light polarization with the quantum Chernoff bound  

SciTech Connect (OSTI)

We recall the framework of a consistent quantum description of polarization of light. Accordingly, the degree of polarization of a two-mode state {rho} of the quantum radiation field can be defined as a distance of a related state {rho}{sub b} to the convex set of all SU(2)-invariant two-mode states. We explore a distance-type polarization measure in terms of the quantum Chernoff bound and derive its explicit expression. A comparison between the Chernoff and Bures degrees of polarization leads to interesting conclusions for some particular states chosen as illustrative examples.

Ghiu, Iulia; Marian, Tudor A. [Centre for Advanced Quantum Physics, Department of Physics, University of Bucharest, P.O. Box MG-11, R-077125 Bucharest-Magurele (Romania); Bjoerk, Gunnar [School of Information and Communication Technology, Royal Institute of Technology (KTH), Electrum 229, SE-164 40 Kista (Sweden); Marian, Paulina [Centre for Advanced Quantum Physics, Department of Physics, University of Bucharest, P.O. Box MG-11, R-077125 Bucharest-Magurele (Romania); Department of Chemistry, University of Bucharest, Boulevard Regina Elisabeta 4-12, R-030018 Bucharest (Romania)

2010-08-15T23:59:59.000Z

397

Embodied Energy and Off-Grid Lighting  

E-Print Network [OSTI]

as a point of comparison with LED lighting product embodieda fairer comparison between off- grid LED lighting and other

Alstone, Peter

2012-01-01T23:59:59.000Z

398

Overcoming Common Pitfalls: Energy Efficient Lighting Projects...  

Broader source: Energy.gov (indexed) [DOE]

Overcoming Common Pitfalls: Energy Efficient Lighting Projects Overcoming Common Pitfalls: Energy Efficient Lighting Projects Transcript Presentation More Documents & Publications...

399

Bell tests with photon-entanglement: LHV models and critical efficiencies at the light of Wigner-PDC optics  

E-Print Network [OSTI]

Within the Wigner-PDC picture of photon entanglement, detection "errors" are not independent (though they may look, on average), nor can they be controlled by means of a technological improvement on the detectors. Those two elements make possible the interpretation of experimental evidence without the need to exclude local realism: for that reason, we propose the abandonment of the usual (photon, particle-based) description of (PDC-generated) light states, in favour of an also quantum, but field-theoretical description (QED), a description that finds a one-to-one equivalent in the Wigner-PDC approach we have advocated in recent posts.

Rodriguez, David

2011-01-01T23:59:59.000Z

400

Bell tests with photon-entanglement: LHV models and critical efficiencies at the light of Wigner-PDC optics  

E-Print Network [OSTI]

Within the Wigner-PDC picture of photon entanglement, detection "errors" are not independent (though they may look, on average), nor can they be controlled by means of a technological improvement on the detectors. Those two elements make possible the interpretation of experimental evidence without the need to exclude local realism: for that reason, we propose the abandonment of the usual (photon, particle-based) description of (PDC-generated) light states, in favour of an also quantum, but field-theoretical description (QED), a description that finds a one-to-one equivalent in the Wigner-PDC approach we have advocated in recent posts.

David Rodriguez

2011-12-15T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Automatic Mechetronic Wheel Light Device  

DOE Patents [OSTI]

A wheel lighting device for illuminating a wheel of a vehicle to increase safety and enhance aesthetics. The device produces the appearance of a "ring of light" on a vehicle's wheels as the vehicle moves. The "ring of light" can automatically change in color and/or brightness according to a vehicle's speed, acceleration, jerk, selection of transmission gears, and/or engine speed. The device provides auxiliary indicator lights by producing light in conjunction with a vehicle's turn signals, hazard lights, alarm systems, and etc. The device comprises a combination of mechanical and electronic components and can be placed on the outer or inner surface of a wheel or made integral to a wheel or wheel cover. The device can be configured for all vehicle types, and is electrically powered by a vehicle's electrical system and/or battery.

Khan, Mohammed John Fitzgerald (Silver Spring, MD)

2004-09-14T23:59:59.000Z

402

assurance program description: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

workforce at LANL. DataImpacts LANL Funding: These Postdocs are paid from programmatic funding within 2 Program Description Queen's University Computer Technologies and...

403

STEP Energy Coach and Technical Consultant Job Descriptions ...  

Energy Savers [EERE]

Consultant Job Descriptions.pdf More Documents & Publications Technical Consultant RFP Tool Kit Framework: Small Town University Energy Program (STEP) Technical Consultant...

404

E-Print Network 3.0 - approximation descriptions microscopiques...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

de l'approximation locale. Ce calcul est entirement... :lpmmc.grenoble.cnrs.frspip.php?article404 Description : Les polaritons de cavit sont des quasiparticules hybrides...

405

June 1998Program Description Windows and Daylighting Group  

E-Print Network [OSTI]

June 1998Program Description THERM 2.0 Windows and Daylighting Group Building Technologies, and Dariush Arasteh Windows and Daylighting Group Building Technologies Department Environmental Energy

406

Community College Institute (CCI) Program Description The Community...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Community College Institute (CCI) Program Description The Community College Internship (CCI) program seeks to encourage community college students to enter technical careers...

407

New Mexico Hydrogen Fuels Challenge Program Description The New...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

New Mexico Hydrogen Fuels Challenge Program Description The New Mexico Hydrogen Fuels Challenge is an event that provides a hands-on opportunity for middle school students (grades...

408

AHTR Refueling Systems and Process Description  

SciTech Connect (OSTI)

The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride saltĖcooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energyís Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published [1], and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the levels of maturity of the various SSCs to provide guidance for future technology developments. The conceptual design information presented in this report is very preliminary in nature. Significant uncertainty remains about several aspects of the process and even the radiation and mechanical performance of plate-type coated-particle fuel.

Varma, V.K.; Holcomb, D.E.; Bradley, E.C.; Zaharia, N.M.; Cooper, E.J.

2012-07-15T23:59:59.000Z

409

AHTR Refueling Systems and Process Description  

SciTech Connect (OSTI)

The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt-cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy's Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the levels of maturity of the various SSCs to provide guidance for future technology developments. The conceptual design information presented in this report is very preliminary in nature. Significant uncertainty remains about several aspects of the process and even the radiation and mechanical performance of plate-type coated-particle fuel.

Varma, Venugopal Koikal [ORNL; Holcomb, David Eugene [ORNL; Bradley, Eric Craig [ORNL; Zaharia, Nathaniel M [ORNL; Cooper, Eliott J [ORNL

2012-07-01T23:59:59.000Z

410

Utility lighting summit proves illuminating  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Utility-lighting-summit-proves-illuminating Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects & Initiatives Expand Projects...

411

Photonic crystal light emitting diode.  

E-Print Network [OSTI]

?? This master's thesis describe electromagnetic simulations of a gallium antimonide (GaSb) light emitting diode, LED. A problem for such devices is that most ofÖ (more)

Leirset, Erlend

2010-01-01T23:59:59.000Z

412

Linac Coherent Light Source Overview  

ScienceCinema (OSTI)

Take an animated tour of the Linac Coherent Light Source (LCLS). Follow the laser pulse from the injector gun all the way through to the Far Experimental Hall.

None

2013-05-29T23:59:59.000Z

413

Light Water Reactor Sustainability Newsletter  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and nuclear waste disposal. Dr. Corradini has extensive research experience in the phenomenology of beyond design basis Meet the New LWRS Program Pathway Lead accidents in light...

414

LED Lighting Off the Grid  

Energy Savers [EERE]

D. & Kammen, D. M. Decentralized energy systems for clean electricity access. Nature Climate Change accepted, in press, (2015). Off-Grid Status Quo : Fuel Based Lighting...

415

Pedestrian-Friendly Nighttime Lighting  

Broader source: Energy.gov [DOE]

This November 19, 2013 webinar presented issues and considerations related to pedestrian-friendly nighttime lighting, such as color rendering, safety, and adaptation. When it comes to outdoor...

416

Light Water Reactor Sustainability Newsletter  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

hydraulics software RELAP-7 (which is under development in the Light Water Reactor Sustainability LWRS Program). A novel interaction between the probabilistic part (i.e., RAVEN)...

417

Light Water Reactor Sustainability Newsletter  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

30-35, August 2012. Clayton, D. A. and M. S. Hileman, 2012, Light Water Reactor Sustainability Non-Destructive Evaluation for Concrete Research and Development Roadmap, ORNLTM-...

418

Linac Coherent Light Source Overview  

Broader source: Energy.gov [DOE]

Take an animated tour of the Linac Coherent Light Source (LCLS). Follow the laser pulse from the injector gun all the way through to the Far Experimental Hall.

419

Lighting with Paint FABIO PELLACINI  

E-Print Network [OSTI]

Lighting with Paint FABIO PELLACINI Dartmouth College and FRANK BATTAGLIA, R. KEITH MORLEY, animation, rendering, optimization, painting ACM Reference Format: Pellacini, F., Battaglia, F., Morley, R

Pellacini, Fabio

420

Two-color photoionization of calcium using SHG and LED light  

E-Print Network [OSTI]

We present a photoionization method to load single 40Ca ions in a linear Paul trap from an atomic beam. Neutral Ca I atoms are resonantly excited from the ground state to the intermediate 4s4p 1P_1-level using coherent 423nm radiation produced by single-pass second harmonic generation in a periodically poled KTiOPO_4 crystal pumped with an 120mW extended cavity diode laser. Ionization is then attained with a high-power light emitting diode imaged to the trap center, using an appropriately designed optical system composed of standard achromatic doublet lenses. The setup simplifies previous implementations at similar efficiency, and it hardly requires any maintenance at all.

C. Schuck; F. Rohde; M. Almendros; M. Hennrich; J. Eschner

2009-11-19T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Light Emission of Argon Discharges: Importance of Heavy Particle Processes  

SciTech Connect (OSTI)

Simulation studies on argon glow discharges established between flat disc electrodes, at pressure x electrode separation (pd) of 45 Pa cm are reported, with special attention to heavy-particle processes including excitation-induced light emission. The discharges are investigated through self-consistent hybrid modelling, consisting of a fluid description for components near local hydrodynamic equilibrium (slow electrons and ions), and Monte Carlo treatment of energetic electrons and heavy particles (ions and neutral atoms). The light emission profiles are analyzed for a wide range of operating conditions. The numerical results for the relative intensities and the shapes of the negative glow (created by electron impact excitation) and the cathode glow (created by heavy particle impact excitation) are in good agreement with experimental data obtained by Maric et al.

Hartmann, Peter [Research Institute for Solid State Physics and Optics, Hungarian Academy of Sciences, POB 49, H-1525 Budapest (Hungary)

2004-12-01T23:59:59.000Z

422

Ab initio calculations of light-ion fusion reactions  

SciTech Connect (OSTI)

The exact treatment of nuclei starting from the constituent nucleons and the fundamental interactions among them has been a long-standing goal in nuclear physics. Above all nuclear scattering and reactions, which require the solution of the many-body quantum-mechanical problem in the continuum, represent an extraordinary theoretical as well as computational challenge for ab initio approaches. The ab initio No-Core Shell Model/Resonating-Group Method (NCSM/RGM) complements a microscopic cluster technique with the use of realistic interactions, and a microscopic and consistent description of the nucleon clusters. This approach is capable of describing simultaneously both bound and scattering states in light nuclei. Recent applications to light nuclei scattering and fusion reactions relevant to energy production in stars and Earth based fusion facilities, such as the deuterium-{sup 3}He fusion, are presented. Progress toward the inclusion of the three nucleon force into the formalism is outlined.

Hupin, G.; Quaglioni, S.; Navratil, P. [Lawrence Livermore National Laboratory, P.O. Box 808, L-414, Livermore, California 94551 (United States); TRIUMF, 4004 Wesbrook Mall, Vancouver, British Columbia, V6T 2A3 (Canada) and Lawrence Livermore National Laboratory, P. O. Box 808, L-414, Livermore, California 94551 (United States)

2012-10-20T23:59:59.000Z

423

Controlling Light to Make the Most Energy From the Sun  

SciTech Connect (OSTI)

Representing the Light-Material Interactions in Energy Conversion (LMI), this document is one of the entries in the Ten Hundred and One Word Challenge. As part of the challenge, the 46 Energy Frontier Research Centers were invited to represent their science in images, cartoons, photos, words and original paintings, but any descriptions or words could only use the 1000 most commonly used words in the English language, with the addition of one word important to each of the EFRCs and the mission of DOE energy. The mission of LMI to tailor the morphology, complex dielectric structure, and electronic properties of matter so as to sculpt the flow of sunlight and heat, enabling light conversion to electrical and chemical energy with unprecedented efficiency.

Callahan, Dennis; Corcoran, Chris; Eisler, Carissa; Flowers, Cris; Goodman, Matt; Hofmann, Carrie; Sadtler, Bryce

2013-07-18T23:59:59.000Z

424

Ceramic corrosion/erosion project description  

SciTech Connect (OSTI)

As a part of the United States Department of Energy's High Temperature Turbine Technology Program, the Morgantown Energy Technology Center is participating in a Ceramics Corrosion/Erosion Materials Study. Objective is to create a technology base for ceramic materials which could be used by stationary gas power turbines operating with a high-temperature, coal-derived, low-Btu gas products of combustion environment. Two facilities are designed and installed to burn a varying low-Btu coal-derived gas in a controlled manner. This report contains the objectives and testing philosophy as well as the operating, specimen handling, and emergency procedures for the facilities. The facilities were checked out in August/September 1980. Testing is scheduled to begin in late 1980 with completion of 1000 hours of ceramic materials exposure to be completed by early 1981. Most of the enclosed is an update of two METC Information Releases (IR), i.e., IR 442 (1979) Test Plan for Ceramic Corrosion/Erosion Project, and IR 817 (1980) Ceramic Corrosion/Erosion Project Description.

Nakaishi, C.V.; Carpenter, L.K.

1981-02-01T23:59:59.000Z

425

Theoretical descriptions of neutron emission in fission  

SciTech Connect (OSTI)

Brief descriptions are given of the observables in neutron emission in fission together with early theoretical representations of two of these observables, namely, the prompt fission neutron spectrum N(E) and the average prompt neutron multiplicity {bar {nu}}{sub p}. This is followed by summaries, together with examples, of modern approaches to the calculation of these two quantities. Here, emphasis is placed upon the predictability and accuracy of the new approaches. In particular, the dependencies of N(E) and {bar {nu}}{sub p} upon the fissioning nucleus and its excitation energy are discussed. Then, recent work in multiple-chance fission and other recent work involving new measurements are presented and discussed. Following this, some properties of fission fragments are mentioned that must be better known and better understood in order to calculate N(E) and {bar {nu}}{sub p} with higher accuracy than is currently possible. In conclusion, some measurements are recommended for the purpose of benchmarking simultaneous calculations of neutron emission and gamma emission in fission. 32 refs., 26 figs.

Madland, D.G.

1990-01-01T23:59:59.000Z

426

Transmutation Fuel Campaign Description and Status  

SciTech Connect (OSTI)

This report contains a technical summary package in response to a Level 2 milestone in the transmutation fuel campaign (TFC) management work-package calling for input to the Secretarial decision. At present, the form of the Secretarial decision package is not fully defined, and it is not clear exactly what will be required from the TFC as a final input. However, it is anticipated that a series oftechnical and programmatic documents will need to be provided in support of a wider encompassing document on GNEP technology development activities. The TFC technical leadership team provides this report as initial input to the secretarial decision package which is being developed by the Technical Integration Office (TIO) in support of Secretarial decision. This report contains a summary of the TFC execution plan with a work breakdown structure, highlevel schedule, major milestones, and summary description of critical activities in support of campaign objectives. Supporting documents referenced in this report but provided under separate cover include: ē An updated review of the state-of-the art for transmutation fuel development activities considering national as well as international fuel research and development testing activities. ē A definition of the Technology Readiness Level (TRL) used to systematically define and execute the transmutation fuel development activities.

Jon Carmack; Kemal O. Pasamehmetoglu

2008-01-01T23:59:59.000Z

427

Symplectic map description of Halley's comet dynamics  

E-Print Network [OSTI]

The main features of 1P/Halley chaotic dynamics can be described by a two dimensional symplectic map. Using Mel'nikov integral we semi-analytically determine such a map for 1P/Halley taking into account gravitational interactions from the Sun and the eight planets. We determine the Solar system kick function ie the energy transfer to 1P/Halley along one passage through the Solar system. Our procedure allows to compute for each planet its contribution to the Solar system kick function which appears to be the sum of the Keplerian potential of the planet and of a rotating circular gravitational dipole potential due to the Sun movement around Solar system barycenter. We test the robustness of the symplectic Halley map by directly integrating Newton's equations over $\\sim 2.4\\cdot 10^4$ yr around Y2K and by reconstructing the Solar system kick function. Our results show that the Halley map with fixed parameters gives a reliable description of comet dynamics on time scales of $10^4$ yr while on a larger scales the parameters of the map are slowly changing due to slow oscillations of orbital momentum.

G. Rollin; P. Haag; J. Lages

2015-02-02T23:59:59.000Z

428

EK101 Engineering Light Project: Evaluate Residential Lighting  

E-Print Network [OSTI]

for residential lighting (LED, Compact Fluorescent, Incandescent). Develop a plan of experiments to be conducted, CF, and Incandescent bulbs for the past ten years. (try the wayback time machine if other sources fail). Discuss the key challenges associated with a transition from incandescent lighting

Bifano, Thomas

429

Nittany Lights Landscape Lighting Sept. 28-30, 2012  

E-Print Network [OSTI]

Nittany Lights ­ Landscape Lighting Workshop Sept. 28-30, 2012 Penn State Campus - University Park with a lecture at the Palmer Art Museum to be provided by internationally known architectural/landscape artist get a chance to think beyond budgets, maintenance, codes, etc and get back to the fun creative side

430

Light-by-Light Scattering Effect in Light-Cone Supergraphs  

E-Print Network [OSTI]

We give a relatively simple explanation of the light-cone supergraph prediction for the UV properties of the maximally supersymmetric theories. It is based on the existence of a dynamical supersymmetry which is not manifest in the light-cone supergraphs. It suggests that N=4 supersymmetric Yang-Mills theory is UV finite and N=8 supergravity is UV finite at least until 7 loops whereas the $n$-point amplitudes have no UV divergences at least until $L=n+3$. Here we show that this prediction can be deduced from the properties of light-cone supergraphs analogous to the light-by-light scattering effect in QED. A technical aspect of the argument relies on the observation that the dynamical supersymmetry action is, in fact, a compensating field-dependent gauge transformation required for the retaining the light-cone gauge condition $A_+=0$.

Renata Kallosh; Pierre Ramond

2010-06-24T23:59:59.000Z

431

Database Description with SDM: A Semantic Database Model  

E-Print Network [OSTI]

Database Description with SDM: A Semantic Database Model MICHAEL HAMMER Massachusetts Institute of Technology and DENNIS McLEOD University of Southern California SDM is a high-level semantics-based database description and structuring formalism (database model) for databases. This database model is designed

McLeod, Dennis

432

2012 Graduate School of Science Current Course Descriptions Common Courses  

E-Print Network [OSTI]

, and social issues (ELSI) as well as cases of bioethics, climate change and nuclear power. https2012 Graduate School of Science Current Course Descriptions Common Courses Science Communication Courses Course code Course title Instructor Course Description 35620-2001 Theory of Science Communication

Sano, Masaki

433

UO{sub 3} plant turnover - facility description document  

SciTech Connect (OSTI)

This document was developed to provide a facility description for those portions of the UO{sub 3} Facility being transferred to Bechtel Hanford Company, Inc. (BHI) following completion of facility deactivation. The facility and deactivated state condition description is intended only to serve as an overview of the plant as it is being transferred to BHI.

Clapp, D.A.

1995-01-01T23:59:59.000Z

434

4-H Horse Advisory Committee Member Service Description And Agreement  

E-Print Network [OSTI]

. Responsibilities · Follow all guidelines and policies of University of New Hampshire Cooperative Extension 4-H4-H Horse Advisory Committee Member Service Description And Agreement Purpose · To serve to the scope of the duties defined in this service description. Accountable to Extension staff

New Hampshire, University of

435

Inventory List Item Number Brief Description Price Preferred Vendor  

E-Print Network [OSTI]

Inventory List UT Austin Item Number Brief Description Price Preferred Vendor L0146 Adapter, Glass w/Screw Top, Amber, 4 dram $0.56 VWRSC 4/21/14 Page - 1 #12;Inventory List UT Austin Item Number;Inventory List UT Austin Item Number Brief Description Price Preferred Vendor S0027 CD, Recordable $0

436

STAFF POSITION DESCRIPTION SAN JOSE STA TE HUMAN RESOURCES  

E-Print Network [OSTI]

STAFF POSITION DESCRIPTION SAN JOSE STA TE HUMAN RESOURCES UNIVERSITY Workforce Planning l: 408-924-2250 I408-924-1784 (fax) Job Description Staff Date: Workforce Planning, Human Resources (Name [Workforce Planning reviews the CSU classification standards with essential duties of the positions] F

Su, Xiao

437

Adapting Optimization Techniques to Description Logics with Concrete Domains  

E-Print Network [OSTI]

Adapting Optimization Techniques to Description Logics with Concrete Domains Anni-Yasmin Turhan backtracking and model merging can be adapted to description logics with concrete domains. We propose al) a new requirement for concrete domains in order to enable dependency directed backtracking for all clash

Haarslev, Volker

438

Adapting Optimization Techniques to Description Logics with Concrete Domains  

E-Print Network [OSTI]

Adapting Optimization Techniques to Description Logics with Concrete Domains Anni­Yasmin Turhan backtracking and model merging can be adapted to description logics with concrete domains. We propose al) a new requirement for concrete domains in order to enable dependency directed backtracking for all clash

Haarslev, Volker

439

NExpTime-complete Description Logics with Concrete Domains  

E-Print Network [OSTI]

that reasoning with the concrete do- main D (i.e., testing the satis#12;ability of #12;nite conjunctionsChapter 1 NExpTime-complete Description Logics with Concrete Domains Carsten Lutz Abstract. Description Logics (DLs) incorporating concrete domains are useful formalisms for integrated reasoning about

Baader, Franz

440

Review article FUSSIM2: brief description of the simulation model  

E-Print Network [OSTI]

Review article FUSSIM2: brief description of the simulation model and application to fertigation zone, which may be harmful to crop development. A two-dimensional simulation model for the above-dimensional simulation model Résumé ­ FUSSIM2 : brève description du modèle de simulation et application aux scenari de

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Description and Simulation of Gust Front Wind Field Lijuan Wanga  

E-Print Network [OSTI]

-stationarity of the wind field associated with these extreme events poses serious challenges in their modelingDescription and Simulation of Gust Front Wind Field Lijuan Wanga , Ahsan Kareemb a Nat front wind field is proposed based on the time-frequency description of the wind field. Traditionally

Kareem, Ahsan

442

Lighting and Dark Sky Regulations  

E-Print Network [OSTI]

.........................................................................................................2 C. Cherokee County, Georgia's Outdoor Lighting and Road Glare Ordinance visited Apr. 0, 2008) (providing links to ordinances throughout the United States). 2 See, e.g. Cherokee Protection Ordinance (Dec. , 200). 5 See, e.g. Model Lighting Section for Zoning Ordinances and Cherokee

Rosemond, Amy Daum

443

Quantum Coherence in Photosynthetic Light  

E-Print Network [OSTI]

the following: How do light-harvesting systems deliver such high efficiency in the presence of disordered:333­61 First published online as a Review in Advance on December 13, 2011 The Annual Review of Condensed Matter quantum efficiency of photosynthetic light harvesting. Further, this speculation has led to much effort

Fleming, Graham R.

444

Light-Front Holography, Light-Front Wavefunctions, and Novel QCD Phenomena  

SciTech Connect (OSTI)

Light-Front Holography is one of the most remarkable features of the AdS/CFT correspondence. In spite of its present limitations it provides important physical insights into the nonperturbative regime of QCD and its transition to the perturbative domain. This novel framework allows hadronic amplitudes in a higher dimensional anti-de Sitter (AdS) space to be mapped to frame-independent light-front wavefunctions of hadrons in physical space-time. The model leads to an effective confining light-front QCD Hamiltonian and a single-variable light-front Schroedinger equation which determines the eigenspectrum and the light-front wavefunctions of hadrons for general spin and orbital angular momentum. The coordinate z in AdS space is uniquely identified with a Lorentz-invariant coordinate {zeta} which measures the separation of the constituents within a hadron at equal light-front time and determines the off-shell dynamics of the bound-state wavefunctions, and thus the fall-off as a function of the invariant mass of the constituents. The soft-wall holographic model modified by a positive-sign dilaton metric, leads to a remarkable one-parameter description of nonperturbative hadron dynamics - a semi-classical frame-independent first approximation to the spectra and light-front wavefunctions of meson and baryons. The model predicts a Regge spectrum of linear trajectories with the same slope in the leading orbital angular momentum L of hadrons and the radial quantum number n. The hadron eigensolutions projected on the free Fock basis provides the complete set of valence and non-valence light-front Fock state wavefunctions {Psi}{sub n/H} (x{sub i}, k{sub {perpendicular}i}, {lambda}{sub i}) which describe the hadron's momentum and spin distributions needed to compute the direct measures of hadron structure at the quark and gluon level, such as elastic and transition form factors, distribution amplitudes, structure functions, generalized parton distributions and transverse momentum distributions. The effective confining potential also creates quark-antiquark pairs from the amplitude q {yields} q{bar q}q. Thus in holographic QCD higher Fock states can have any number of extra q{bar q} pairs. We discuss the relevance of higher Fock-states for describing the detailed structure of space and time-like form factors. The AdS/QCD model can be systematically improved by using its complete orthonormal solutions to diagonalize the full QCD light-front Hamiltonian or by applying the Lippmann-Schwinger method in order to systematically include the QCD interaction terms. A new perspective on quark and gluon condensates is also obtained.

Brodsky, Stanley J.; /SLAC /Southern Denmark U., CP3-Origins; de Teramond, Guy F.; /Costa Rica U.

2012-02-16T23:59:59.000Z

445

Shippingport Spent Fuel Canister System Description  

SciTech Connect (OSTI)

In 1978 and 1979, a total of 72 blanket fuel assemblies (BFAs), irradiated during the operating cycles of the Shippingport Atomic Power Station's Pressurized Water Reactor (PWR) Core 2 from April 1965 to February 1974, were transferred to the Hanford Site and stored in underwater storage racks in Cell 2R at the 221-T Canyon (T-Plant). The initial objective was to recover the produced plutonium in the BFAs, but this never occurred and the fuel assemblies have remained within the water storage pool to the present time. The Shippingport Spent Fuel Canister (SSFC) is a confinement system that provides safe transport functions (in conjunction with the TN-WHC cask) and storage for the BFAs at the Canister Storage Building (CSB). The current plan is for these BFAs to be retrieved from wet storage and loaded into SSFCs for dry storage. The sealed SSFCs containing BFAs will be vacuum dried, internally backfilled with helium, and leak tested to provide suitable confinement for the BFAs during transport and storage. Following completion of the drying and inerting process, the SSFCs are to be delivered to the CSB for closure welding and long-term interim storage. The CSB will provide safe handling and dry storage for the SSFCs containing the BFAs. The purpose of this document is to describe the SSFC system and interface equipment, including the technical basis for the system, design descriptions, and operations requirements. It is intended that this document will be periodically updated as more equipment design and performance specification information becomes available.

JOHNSON, D.M.

2000-03-27T23:59:59.000Z

446

Light beam frequency comb generator  

DOE Patents [OSTI]

A light beam frequency comb generator uses an acousto-optic modulator to generate a plurality of light beams with frequencies which are uniformly separated and possess common noise and drift characteristics. A well collimated monochromatic input light beam is passed through this modulator to produce a set of both frequency shifted and unshifted optical beams. An optical system directs one or more frequency shifted beams along a path which is parallel to the path of the input light beam such that the frequency shifted beams are made incident on the modulator proximate to but separated from the point of incidence of the input light beam. After the beam is thus returned to and passed through the modulator repeatedly, a plurality of mutually parallel beams are generated which are frequency-shifted different numbers of times and possess common noise and drift characteristics.

Priatko, Gordon J. (Cupertino, CA); Kaskey, Jeffrey A. (Livermore, CA)

1992-01-01T23:59:59.000Z

447

A vertical drift chamber as a high resolution focal plane detector for heavy ion spectroscopy with the Enge split-pole spectrometer  

E-Print Network [OSTI]

the VDC chamber. In (a), the true equipotential distribution, numerically calculated using program SIMION, is shown. The applied cathode voltage was -9. 5 kV. Each line represents a potential difference of 400 V. In (b), the approximate field... designed for future heavy ion I spectroscopy applications in the split-pole spectrograph. The hybrid t detector will be capable of identifying heavy iona having masses through A - 20 and energies up to 35 MeV/amu to be available from the new K-500...

Yates, Kenneth Warren

2012-06-07T23:59:59.000Z

448

OLED lighting devices having multi element light extraction and luminescence conversion layer  

DOE Patents [OSTI]

An apparatus such as a light source has a multi element light extraction and luminescence conversion layer disposed over a transparent layer of the light source and on the exterior of said light source. The multi-element light extraction and luminescence conversion layer includes a plurality of light extraction elements and a plurality of luminescence conversion elements. The light extraction elements diffuses the light from the light source while luminescence conversion elements absorbs a first spectrum of light from said light source and emits a second spectrum of light.

Krummacher, Benjamin Claus (Regensburg, DE); Antoniadis, Homer (Mountain View, CA)

2010-11-16T23:59:59.000Z

449

Using QECBs for Street Lighting Upgrades: Lighting the Way to...  

Broader source: Energy.gov (indexed) [DOE]

Summarizes how the City of San Diego leveraged 13.1 million in qualified energy conservation bonds to increase the size of a street lighting upgrade project. Author: Lawrence...

450

Inorganic volumetric light source excited by ultraviolet light  

DOE Patents [OSTI]

The invention relates to a composition for the volumetric generation of radiation. The composition comprises a porous substrate loaded with a component capable of emitting radiation upon interaction with an exciting radiation. Preferably, the composition is an aerogel substrate loaded with a component, e.g., a phosphor, capable of interacting with exciting radiation of a first energy, e.g., ultraviolet light, to produce radiation of a second energy, e.g., visible light. 4 figures.

Reed, S.; Walko, R.J.; Ashley, C.S.; Brinker, C.J.

1994-04-26T23:59:59.000Z

451

Inorganic volumetric light source excited by ultraviolet light  

DOE Patents [OSTI]

The invention relates to a composition for the volumetric generation of radiation. The composition comprises a porous substrate loaded with a component capable of emitting radiation upon interaction with an exciting radiation. Preferably, the composition is an aerogel substrate loaded with a component, e.g., a phosphor, capable of interacting with exciting radiation of a first energy, e.g., ultraviolet light, to produce radiation of a second energy, e.g., visible light.

Reed, Scott (Albuquerue, NM); Walko, Robert J. (Albuquerue, NM); Ashley, Carol S. (Albuquerue, NM); Brinker, C. Jeffrey (Albuquerue, NM)

1994-01-01T23:59:59.000Z

452

Saturable absorption and 'slow light'  

E-Print Network [OSTI]

Quantitative evaluation of some recent 'slow light' experiments based on coherent population oscillations (CPO) shows that they can be more simply interpreted as saturable absorption phenomena. Therefore they do not provide an unambiguous demonstration of 'slow light'. Indeed a limiting condition on the spectral bandwidth is not generally satisfied, such that the requirements for burning a narrow spectral hole in the homogeneously broadened absorption line are not met. Some definitive tests of 'slow light' phenomena are suggested, derived from analysis of phase shift and pulse delay for a saturable absorber

Adrian C Selden

2006-03-25T23:59:59.000Z

453

46th Street Pilot Street Lighting Project  

E-Print Network [OSTI]

Street to 48th Street) as standard high-pressure sodium (HPS) lighting comparison corridor #12;The over time #12;Initial Lighting Comparison #12;Lighting Project Location #12;Street Light Layout 3046th Street Pilot Street Lighting Project A Joint Venture: Hennepin County & City of Minneapolis

Minnesota, University of

454

Projection screen having reduced ambient light scattering  

DOE Patents [OSTI]

An apparatus and method for improving the contrast between incident projected light and ambient light reflected from a projection screen are described. The efficiency of the projection screen for reflection of the projected light remains high, while permitting the projection screen to be utilized in a brightly lighted room. Light power requirements from the projection system utilized may be reduced.

Sweatt, William C. (Albuquerque, NM)

2010-05-11T23:59:59.000Z

455

Residential Lighting: Title 24 and Technology Update  

E-Print Network [OSTI]

Residential Lighting: Title 24 and Technology Update Best practices in lighting design to comply;INTRODUCTION Course Topics Part 1: Technology Overview · Common lighting terminology · Residential lighting residential lighting regulation · Design examples to reach or exceed code Part 5: Compliance Process · Step

California at Davis, University of

456

Control and Acquisition Software for the Visible-Light Fabry-Prot Interferometer at the Big Bear Solar Observatory  

E-Print Network [OSTI]

-Light Imaging Magnetograph (VIM). We describe the software libraries and methods that we use to develop (VIM) and the InfraRed Imaging Magnetograph (IRIM). A detailed description of IRIM is given elsewhere in these proceedings.[2] VIM has two advantages over the DVMG system: (1) it has been designed to work with adaptive

457

Next Generation Light Source Workshops  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Next Generation Light Source Workshops A series of workshops will be held in late August with the goal of refining the scientific drivers for the facility and translating the...

458

Flexible liquid core light guide with focusing and light shaping attachments  

DOE Patents [OSTI]

A liquid light guide system for ultraviolet light is disclosed that has a light shaping arrangement for the emitted light, a stable liquid core and sheath and reliable and effective end closures. 12 figs.

Kross, B.J.; Majewski, S.; Zorn, C.J.; Majewski, L.A.

1997-11-04T23:59:59.000Z

459

Analysis of the Use of Wind Energy to Supplement the Power Needs at McMurdo Station and Amundsen-Scott South Pole Station, Antarctica  

SciTech Connect (OSTI)

This report summarizes an analysis of the inclusion of wind-driven power generation technology into the existing diesel power plants at two U.S. Antarctic research stations, McMurdo and Amundsen-Scott South Pole Station. Staff at the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) conducted the analysis. Raytheon Polar Services, which currently holds the private sector support contract for the two research stations, was a major contributor to this report. To conduct the analysis, available data were obtained on the wind resources, power plant conditions, load, and component cost. Whenever possible, we validated the information. We then used NREL's Hybrid2 power system modeling software to analyze the potential and cost of using wind turbine generators at the two aforementioned facilities. Unfortunately, the power systems and energy allocations at McMurdo and South Pole Station are being redeveloped, so it is not possible to validate future fuel use. This report is an initial assessment of the potential use of wind energy and should be followed by further, more detailed analysis if this option is to be considered further.

Baring-Gould, I.; Robichaud, R.; McLain, K.

2005-05-01T23:59:59.000Z

460

EECBG Success Story: Lighting Retrofit Improving Visibility,...  

Broader source: Energy.gov (indexed) [DOE]

New LED lighting fixtures (right) emit a whiter light than existing high-pressure sodium cobra head streetlights (left) and don't spill light onto nearby houses. | Photos courtesy...

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Office Lighting: Title 24 & Technology Update  

E-Print Network [OSTI]

Office Lighting: Title 24 & Technology Update Kelly Cunningham Outreach Director kcunning@ucdavis.edu California Lighting Technology Center, UC Davis RESEARCH . INNOVATION . PARTNERSHIP Supporting compliance apply the Title 24 Building Energy Efficiency Standards code requirements specific to lighting

California at Davis, University of

462

Embodied Energy and Off-Grid Lighting  

E-Print Network [OSTI]

Self-reported Impacts of LED Lighting Technology Comparedto Fuel-based Lighting on Night Market Business Prosperity28, no. 4, pp. 533-546. Lighting Africa (prepared by Dalberg

Alstone, Peter

2012-01-01T23:59:59.000Z

463

Beyond the Replacement Paradigm: Smart Lighting  

E-Print Network [OSTI]

Switches ∑ Smart Building & Grid Interfaces ∑ Efficient full spectrum LEDs without droop ∑ Versatile, low - Visible Light Communications Integration of smart fixtures, networked sensors and control systemsBeyond the Replacement Paradigm: Smart Lighting Robert F. Karlicek, Jr. Director, Smart Lighting

Salama, Khaled

464

Lumental : web-based tunable lighting control  

E-Print Network [OSTI]

Dynamically adjusting the light spectrum of spectrum-tunable light fixtures promises significant energy savings over binary or incremental dimming control. To enable this level of controllability, lighting must evolve from ...

Hall, Harrison King

2012-01-01T23:59:59.000Z

465

Novel phosphors for solid state lighting  

E-Print Network [OSTI]

Solid state white light emitting diode lighting devices outperform conventional light sources in terms of lifetime, durability, and lumens per watt. However, the capital contribution is still to high to encourage widespread adoption. Furthermore...

Furman, Joshua D

2010-11-16T23:59:59.000Z

466

Synchrotron light source data book: Version 4, Revision 05/96  

SciTech Connect (OSTI)

This book is as its name implies a collection of data on existing and planned synchrotron light sources. The intention was to provide a compendium of tools for the design of electron storage rings as synchrotron radiation sources. The slant is toward the accelerator physicist as other booklets such as the X-Ray Data Booklet address the use of synchrotron radiation. It is hoped that the booklet serves as a pocket sized reference to facilitate back of the envelope type calculations. It contains some useful formulae in practical units and a brief description of many of the existing and planned light source lattices.

Murphy, J.B.

1996-05-01T23:59:59.000Z

467

Computational Methodologies and Physical Insights into Electronic Energy Transfer in Photosynthetic Light-Harvesting Complexes  

E-Print Network [OSTI]

We examine computational techniques and methodologies currently in use to explore electronic excitation energy transfer in the context of light-harvesting complexes in photosynthetic antenna systems, and comment on some new insights into the underlying physics. Advantages and pitfalls of these methodologies are discussed, as are some physical insights into the photosynthetic dynamics. By combining results from molecular modelling of the complexes (structural description) with an effective non-equilibrium statistical description (time evolution), we identify some general features, regardless of the particular distribution in the protein scaffold, that are central to light-harvesting dynamics and, that could ultimately be related to the high efficiency of the overall process. Based on these general common features, some possible new directions in the field are discussed.

Leonardo A. Pachon; Paul Brumer

2012-05-21T23:59:59.000Z

468

Microsoft Word - QO-NNSA-SC-Description.docx  

Broader source: Energy.gov (indexed) [DOE]

I Process Description* NNSA Service Center Number: PD 02.04.02 Title: Selection, Training and Approval of Qualifying Officials (QO) for the Technica l Qualification Prog ram (TQP)...

469

Y-12 Lease Summary Address* (Description) Square Footage Lease...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Y-12 Lease Summary Address* (Description) Square Footage Lease Term Expiration Date Onsite Leases 602 Scarboro Rd (New Hope Center) 137,758 square feet Five years 05042012 301...

470

EEE 437 Optoelectronics (3) [SS] Course (Catalog) Description  

E-Print Network [OSTI]

EEE 437 Optoelectronics (3) [SS] Course (Catalog) Description: Basic operating principles of various types of optoelectronic devices which play important roles in commercial and communication. Prerequisite: EEE 436. Textbook: J. Singh, Semiconductor Optoelectronics: An Introduction to Material

Zhang, Junshan

471

Development of a body force description for compressor stability assessment  

E-Print Network [OSTI]

This thesis presents a methodology for a body force description of a compressor with particular application to compressor stability calculations. The methodology is based on extracting blade forces from an axisymmetric ...

Kiwada, George (George Ford)

2008-01-01T23:59:59.000Z

472

Syllabus for MA 16100 IMPACT, Fall 2014 Description: Many ...  

E-Print Network [OSTI]

Syllabus for MA 16100 IMPACT, Fall 2014. Description: Many students find that large lectures are not the best way for them to learn. IMPACT is a university-wide

2014-08-25T23:59:59.000Z

473

Description of isoscalar giant dipole resonance in nuclei  

E-Print Network [OSTI]

Applicability of the Hartree-Fock (HF) based random phase approximation (RPA) with several Skyrme effective interactions to the description of the isoscalar giant monopole (ISGMR) and the isoscalar giant dipole resonance (ISGDR) in 90Zr, 116Sn, 144...

Pochivalov, Oleksiy Grigorievich

2009-05-15T23:59:59.000Z

474

SCS-2002-10 Description of Water Analysis Parameters  

E-Print Network [OSTI]

of laboratories often lack basic descriptions for terminology, potential sources of contaminates or parameters-field brine, sea water, industrial brine, and reclaimed effluent water, etc. Issues Moderate amounts of sodium

475

System design description 241-SY-101 color video camera  

SciTech Connect (OSTI)

This System Design Description describes the major components of the 101-SY color camera system. The system is comprised of the camera assembly, the purge system, and the multiport riser unit.

Kohlman, E.H.; Smet, D.B.

1994-12-01T23:59:59.000Z

476

BuildingName The Description of the Project  

E-Print Network [OSTI]

- ALTERNATES SECTION 012900 ­ PAYMENT PROCEDURES SECTION 013100 - PROJECT MANAGEMENT AND COORDINATIONBuildingName The Description of the Project P00000000 0000 DOCUMENTS SPECIFICATION DIVISION 1 SECTION 013200 - CONSTRUCTION PROGRESS DOCUMENTATION SECTION 013300 - SUBMITTAL PROCEDURES SECTION

Kamat, Vineet R.

477

MECH 502: Advanced/Additive Manufacturing Engineering COURSE DESCRIPTION  

E-Print Network [OSTI]

MECH 502: Advanced/Additive Manufacturing Engineering COURSE DESCRIPTION In this course you product development and innovation. You will develop a rich knowledge of additive manufacturing processes enabling advanced/additive manufacturing and personal fabrication. You will have the opportunity

Schumacher, Russ

478

Generation of Web Service Descriptions and Web Service  

E-Print Network [OSTI]

Generation of Web Service Descriptions and Web Service Module Implementation for Concept University of Science and Technology Software Systems Institute (STS) #12;Abstract Nowadays web services in order to initiate the communication. A web services endpoint communication interface utilizes

479

Norwegian Language description of Jacobs University Hva er Jacobs University?  

E-Print Network [OSTI]

underviser tverrfaglig og deltar i forskningen ved Description of Jacobs University. Jacobs University tilbyr 2006 tilbyr Jacobs University mangfoldige muligheter til å lære av hverandre og leve sammen. Fordelen

480

Formalizing Multimedia Interpretation based on Abduction over Description Logic Aboxes  

E-Print Network [OSTI]

Formalizing Multimedia Interpretation based on Abduction over Description Logic Aboxes Sofia be formally derived using abduction over domain knowledge represented in an ontology. The approach uses rules, and formalizes the multimedia interpretation process using a combined abduction and deduction

Moeller, Ralf

Note: This page contains sample records for the topic "lighting description pole" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Consistent description of kinetics and hydrodynamics of dusty plasma  

SciTech Connect (OSTI)

A consistent statistical description of kinetics and hydrodynamics of dusty plasma is proposed based on the Zubarev nonequilibrium statistical operator method. For the case of partial dynamics, the nonequilibrium statistical operator and the generalized transport equations for a consistent description of kinetics of dust particles and hydrodynamics of electrons, ions, and neutral atoms are obtained. In the approximation of weakly nonequilibrium process, a spectrum of collective excitations of dusty plasma is investigated in the hydrodynamic limit.

Markiv, B. [Institute for Condensed Matter Physics of the National Academy of Sciences of Ukraine, 1 Svientsitskii St., 79011 Lviv (Ukraine)] [Institute for Condensed Matter Physics of the National Academy of Sciences of Ukraine, 1 Svientsitskii St., 79011 Lviv (Ukraine); Tokarchuk, M. [Institute for Condensed Matter Physics of the National Academy of Sciences of Ukraine, 1 Svientsitskii St., 79011 Lviv (Ukraine) [Institute for Condensed Matter Physics of the National Academy of Sciences of Ukraine, 1 Svientsitskii St., 79011 Lviv (Ukraine); National University ďLviv Polytechnic,Ē 12 Bandera St., 79013 Lviv (Ukraine)

2014-02-15T23:59:59.000Z

482

Lighting and GeometryLighting and Geometry Prof. Michael Misha Kazhdan  

E-Print Network [OSTI]

Lighting and GeometryLighting and Geometry Prof. Michael Misha Kazhdan misha· The viewer · The lights N Viewer · The lights · The geometry · The surface properties N L2 V Viewer L1Outline · Surface Properties (Review) · Lighting· Lighting · Geometry· Geometry #12;Surface Properties (Review

Fröhlich, Peter

483

Oscillating light wall above a sunspot light bridge  

E-Print Network [OSTI]

With the high tempo-spatial \\emph{Interface Region Imaging Spectrograph} 1330 {\\AA} images, we find that many bright structures are rooted in the light bridge of NOAA 12192, forming a \\emph{light wall}. The light wall is brighter than the surrounding areas, and the wall top is much brighter than the wall body. The New Vacuum Solar Telescope H$\\alpha$ and the \\emph{Solar Dynamics Observatory} 171 {\\AA} and 131 {\\AA} images are also used to study the light wall properties. In 1330 {\\AA}, 171 {\\AA}, and 131 {\\AA}, the top of the wall has a higher emission, while in the H$\\alpha$ line, the wall top emission is very low. The wall body corresponds to bright areas in 1330 {\\AA} and dark areas in the other lines. The top of the light wall moves upward and downward successively, performing oscillations in height. The deprojected mean height, amplitude, oscillation velocity, and the dominant period are determined to be 3.6 Mm, 0.9 Mm, 15.4 km s$^{-1}$, and 3.9 min, respectively. We interpret the oscillations of the lig...

Yang, Shuhong; Jiang, Fayu; Xiang, Yongyuan

2015-01-01T23:59:59.000Z

484

Science, Optics and You: Light and Colors  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

opticstutorialsindex.html INTRODUCTION LIGHT AND COLORS MODULE m4 SCIENCE, OPTICS & YOU GUIDEBOOK - 62 - SCIENCE, OPTICS & YOU GUIDEBOOK - 63 - m4: Light &...

485

Municipal Consortium LED Street Lighting Workshop Presentations...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Controls Norma Isahakian, City of Los Angeles Bureau of Street Lighting San Jose's "Smart" LED Streetlights: Controlled Amy Olay, City of San Jose Adaptive Lighting Controls...

486

Scientists produce transparent, light-harvesting material  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Transparent, light-harvesting material Scientists produce transparent, light-harvesting material The material could be used in development of transparent solar panels. November 3,...

487

LIGHT WATER REACTOR SUSTAINABILITY PROGRAM: INTRODUCTION  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

LIGHT WATER REACTOR SUSTAINABILITY PROGRAM: INTRODUCTION The Light Water Reactor Sustainability (LWRS) Program is the primary programmatic activity that addresses Objective 1...

488

OTEC- Commercial Lighting Retrofit Rebate Program  

Broader source: Energy.gov [DOE]

The Oregon Trail Electric Consumers Cooperative (OTEC) offers a commercial lighting retrofit program that provides rebates for commercial businesses that change existing lighting to more energy...

489

Technical description of the NRC long-term whole-rod and crud performance test  

SciTech Connect (OSTI)

Westinghouse Hanford Company (WHC) and EG and G-Idaho are jointly conducting a long-term, low-temperature, spent-fuel, whole rod and crud behavior test to provide the Nuclear Regulatory Commission (NRC) with information to assist in the licensing of light water reactor (LWR) spent-fuel, dry storage facilities. Readily available fuel rods from an H.B. Robinson Unit 2 (PWR) fuel assembly and a Peach Bottom-II (BWR) fuel assembly were selected for use in the 50-month test. Both intact and defected rods will be tested in inert and oxidizing atmospheres. A 230/sup 0/C test temperature was selected for the first 10-month run. Both nondestructive and destructive examinations are planned to characterize the fuel rod behavior during the 5-y test. Four interim examinations and a final examination will be conducted. Crud spallation behavior will be investigated by sampling the crud particulate from the test capsules at each of the four interim examinations and at the end of the test. The background to whole rod testing, description of rod breach mechanisms, and a detailed description of the test are presented in this document.

Einziger, R.E.; Fish, R.L.; Knecht, R.L.

1982-09-01T23:59:59.000Z

490

THE LUMINA PROJECT http://light.lbl.gov  

E-Print Network [OSTI]

components for the LED lights. #12;2 Introduction Solid-state lighting based on light emitting diode (LED

Jacobson, Arne

491

Types of Lighting in Commercial Buildings - Lighting Types  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProved ReservesFeet)per Thousand28 198 18 Q 10 14.0 12.2 1.1 QPDF LightingLighting

492

LED Provides Effective and Efficient Parking Area Lighting at...  

Broader source: Energy.gov (indexed) [DOE]

White Light Options for Parking Area Lighting Demonstration Assessment of Light Emitting Diode (LED) Street Lighting, Final Report Guide to FEMP-Designated Parking Lot...

493

Demonstration Assessment of Light-Emitting Diode (LED) Freezer...  

Broader source: Energy.gov (indexed) [DOE]

Demonstration Assessment of Light-Emitting Diode (LED) Freezer Case Lighting Demonstration Assessment of Light-Emitting Diode (LED) Freezer Case Lighting This document is a report...

494

Demonstration Assessment of Light Emitting Diode (LED) Street...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Demonstration Assessment of Light Emitting Diode (LED) Street Lighting, Final Report Demonstration Assessment of Light Emitting Diode (LED) Street Lighting, Final Report This...

495

Light-Front Holography, AdS/QCD, and Hadronic Phenomena  

SciTech Connect (OSTI)

AdS/QCD, the correspondence between theories in a modified five-dimensional anti-de Sitter space and confining field theories in physical space-time, provides a remarkable semiclassical model for hadron physics. Light-front holography allows hadronic amplitudes in the AdS fifth dimension to be mapped to frame-independent light-front wavefunctions of hadrons in physical space-time, thus providing a relativistic description of hadrons at the amplitude level. We identify the AdS coordinate z with an invariant light-front coordinate {zeta} which separates the dynamics of quark and gluon binding from the kinematics of constituent spin and internal orbital angular momentum. The result is a single-variable light-front Schroedinger equation with a confining potential which determines the eigenspectrum and the light-front wavefunctions of hadrons for general spin and orbital angular momentum. The mapping of electromagnetic and gravitational form factors in AdS space to their corresponding expressions in light-front theory confirms this correspondence. Some novel features of QCD are discussed, including the consequences of confinement for quark and gluon condensates. The distinction between static structure functions, such as the probability distributions computed from the square of the light-front wavefunctions, versus dynamical structure functions which include the effects of rescattering, is emphasized. A new method for computing the hadronization of quark and gluon jets at the amplitude level, an event amplitude generator, is outlined.

Brodsky, Stanley J.; /SLAC; de Teramond, Guy F.; /Costa Rica U.

2009-12-09T23:59:59.000Z

496

Electromagnetic reactions on light nuclei  

E-Print Network [OSTI]

Electromagnetic reactions on light nuclei are fundamental to advance our understanding of nuclear structure and dynamics. The perturbative nature of the electromagnetic probes allows to clearly connect measured cross sections with the calculated structure properties of nuclear targets. We present an overview on recent theoretical ab-initio calculations of electron-scattering and photonuclear reactions involving light nuclei. We encompass both the conventional approach and the novel theoretical framework provided by chiral effective field theories. Because both strong and electromagnetic interactions are involved in the processes under study, comparison with available experimental data provides stringent constraints on both many-body nuclear Hamiltonians and electromagnetic currents. We discuss what we have learned from studies on electromagnetic observables of light nuclei, starting from the deuteron and reaching up to nuclear systems with mass number A=16.

Sonia Bacca; Saori Pastore

2014-07-13T23:59:59.000Z

497

Enrichment of light hydrocarbon mixture  

SciTech Connect (OSTI)

Light hydrocarbon enrichment is accomplished using a vertically oriented distillation column having a plurality of vertically oriented, nonselective micro/mesoporous hollow fibers. Vapor having, for example, both propylene and propane is sent upward through the distillation column in between the hollow fibers. Vapor exits neat the top of the column and is condensed to form a liquid phase that is directed back downward through the lumen of the hollow fibers. As vapor continues to ascend and liquid continues to countercurrently descend, the liquid at the bottom of the column becomes enriched in a higher boiling point, light hydrocarbon (propane, for example) and the vapor at the top becomes enriched in a lower boiling point light hydrocarbon (propylene, for example). The hollow fiber becomes wetted with liquid during the process.

Yang; Dali (Los Alamos, NM); Devlin, David (Santa Fe, NM); Barbero, Robert S. (Santa Cruz, NM); Carrera, Martin E. (Naperville, IL); Colling, Craig W. (Warrenville, IL)

2010-08-10T23:59:59.000Z

498

Enrichment of light hydrocarbon mixture  

DOE Patents [OSTI]

Light hydrocarbon enrichment is accomplished using a vertically oriented distillation column having a plurality of vertically oriented, nonselective micro/mesoporous hollow fibers. Vapor having, for example, both propylene and propane is sent upward through the distillation column in between the hollow fibers. Vapor exits neat the top of the column and is condensed to form a liquid phase that is directed back downward through the lumen of the hollow fibers. As vapor continues to ascend and liquid continues to countercurrently descend, the liquid at the bottom of the column becomes enriched in a higher boiling point, light hydrocarbon (propane, for example) and the vapor at the top becomes enriched in a lower boiling point light hydrocarbon (propylene, for example). The hollow fiber becomes wetted with liquid during the process.

Yang, Dali (Los Alamos, NM); Devlin, David (Santa Fe, NM); Barbero, Robert S. (Santa Cruz, NM); Carrera, Martin E. (Naperville, IL); Colling, Craig W. (Warrenville, IL)

2011-11-29T23:59:59.000Z

499

Non-equilibrium quantum systems: Divergence between global and local descriptions  

E-Print Network [OSTI]

Even photosynthesis -- the most basic natural phenomenon underlying Life on Earth -- involves the non-trivial processing of excitations at the pico- and femtosecond scales during light-harvesting. The desire to understand such natural phenomena, as well as interpret the output from ultrafast experimental probes, creates an urgent need for accurate quantitative theories of open quantum systems. However it is unclear how best to generalize the well-established assumptions of an isolated system, particularly under non-equilibrium conditions. Here we compare two popular approaches: a description in terms of a direct product of the states of each individual system (i.e. a local approach) versus the use of new states resulting from diagonalizing the whole Hamiltonian (i.e. a global approach). We show that their equivalence fails when the system is open, in particular under the experimentally ubiquitous condition of a temperature gradient. By solving for the steady-state populations and calculating the heat flux as a test observable, we uncover stark differences between the formulations. This divergence highlights the need to establish rigorous ranges of applicability for such methods in modeling nanoscale transfer phenomena -- including during the light-harvesting process in photosynthesis.

Pedro D. Manrique; Ferney Rodriguez; Luis Quiroga; Neil F. Johnson

2015-02-24T23:59:59.000Z

500

Monitored lighting energy savings from dimmable lighting controls in  

E-Print Network [OSTI]

, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by its trade name, trademark 94720, USA Abstract Digital addressable, dimmable lighting controls were introduced to the US market