Powered by Deep Web Technologies
Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Qualitatitive description : light in the urban environment  

E-Print Network (OSTI)

The quality of our built environment is difficult to describe and to regulate; using light as an example, this thesis develops a descriptive framework using elementary, dynamic and connective forms. The combination of these ...

Stuebing, Susan

1986-01-01T23:59:59.000Z

2

Perturbative QCD Description of Heavy and Light Flavor Jet Quenching  

Science Conference Proceedings (OSTI)

We present a successful description of the medium modification of light and heavy flavor jets within a perturbative-QCD-based approach. Only the couplings involving hard partons are assumed to be weak. The effect of the medium on a hard parton, per unit time, is encoded in terms of three nonperturbative, related transport coefficients which describe the transverse momentum squared gained, the elastic energy loss, and diffusion in elastic energy transfer. Scaling the transport coefficients with the temperature of the medium, we achieve a good description of the centrality dependence of the suppression and the azimuthal anisotropy of leading hadrons. Imposing additional constraints based on leading order (LO) hard thermal loop (HTL) effective theory leads to a worsening of the fit, implying the necessity of computing transport coefficients beyond LO HTL.

Qin Guangyou [Department of Physics, Duke University, Durham, North Carolina 27708 (United States); Department of Physics, Ohio State University, Columbus, Ohio 43210 (United States); Majumder, Abhijit [Department of Physics, Ohio State University, Columbus, Ohio 43210 (United States)

2010-12-31T23:59:59.000Z

3

A description and evaluation of light-emitting diode displays for generation of visual stimuli*  

E-Print Network (OSTI)

A description and evaluation of light-emitting diode displays for generation of visual stimuli 53706 A description of the design and function of light-emitting diode (LED) display modules is given (Time, April 1972). Light-emitting diodes (L~Ds) are examples of these spin-offs, LED display devices

Massaro, Dominic

4

Universality of electron distributions in high-energy air showers - description of Cherenkov light production  

E-Print Network (OSTI)

The shower simulation code CORSIKA has been used to investigate the electron energy and angular distributions in high-energy showers. Based on the universality of both distributions, we develop an analytical description of Cherenkov light emission in extensive air showers, which provides the total number and angular distribution of photons. The parameterisation can be used e.g. to calculate the contribution of direct and scattered Cherenkov light to shower profiles measured with the air fluorescence technique.

F. Nerling; J. Blümer; R. Engel; M. Risse

2005-06-29T23:59:59.000Z

5

A New Kinematical Derivation of the Lorentz Transformation and the Particle Description of Light  

E-Print Network (OSTI)

The Lorentz Transformation is derived from only three simple postulates: (i) a weak kinematical form of the Special Relativity Principle that requires the equivalence of reciprocal space-time measurements by two different inertial observers; (ii) Uniqueness, that is the condition that the Lorentz Transformation should be a single valued function of its arguments; (iii) Spatial Isotropy. It is also shown that to derive the Lorentz Transformation for space-time points lying along a common axis, parallel to the relative velocity direction, of two inertial frames, postulates (i) and (ii) are sufficient. The kinematics of the Lorentz Transformation is then developed to demonstrate that, for consistency with Classical Electrodynamics, light must consist of massless (or almost massless) particles: photons.

J. H. Field

2004-10-27T23:59:59.000Z

6

Topical Area MFE Title: Burning Plasma Science_____________________________________________ Description Fusion energy is released by burning light elements using nuclear reactions which consume mass and  

E-Print Network (OSTI)

Page 1 Topical Area MFE Title: Burning Plasma Science_____________________________________________ · Description Fusion energy is released by burning light elements using nuclear reactions which consume mass-sustained purely by its alpha particle heating. The science of burning plasmas consists of: (1) the physics

7

Lighting.  

SciTech Connect

Since lighting accounts for about one-third of the energy used in commercial buildings, there is opportunity to conserve. There are two ways to reduce lighting energy use: modify lighting systems so that they used less electricity and/or reduce the number of hours the lights are used. This booklet presents a number of ways to do both. Topics covered include: reassessing lighting levels, reducing lighting levels, increasing bulb & fixture efficiency, using controls to regulate lighting, and taking advantage of daylight.

United States. Bonneville Power Administration.

1992-09-01T23:59:59.000Z

8

Lighting  

Energy.gov (U.S. Department of Energy (DOE))

There are many different types of artificial lights, all of which have different applications and uses. Types of lighting include:

9

Lighting  

SciTech Connect

The lighting section of ASHRAE standard 90.1 is discussed. It applies to all new buildings except low-rise residential, while excluding specialty lighting applications such as signage, art exhibits, theatrical productions, medical and dental tasks, and others. In addition, lighting for indoor plant growth is excluded if designed to operate only between 10 p.m. and 6 a.m. Lighting allowances for the interior of a building are determined by the use of the system performance path unless the space functions are not fully known, such as during the initial stages of design or for speculative buildings. In such cases, the prescriptive path is available. Lighting allowances for the exterior of all buildings are determined by a table of unit power allowances. A new addition the exterior lighting procedure is the inclusion of facade lighting. However, it is no longer possible to trade-off power allotted for the exterior with the interior of a building or vice versa. A significant change is the new emphasis on lighting controls.

McKay, H.N. (Hayden McKay Lighting Design, New York, NY (US))

1990-02-01T23:59:59.000Z

10

Solar lighting | Open Energy Information  

Open Energy Info (EERE)

lighting lighting Jump to: navigation, search Introductory Facts About Solar Lights It is not just a normal light bulb.The solar light consists of a LED or Light Emitting Diode, which draw little power. Coupled with constantly recharging batteries, you will never run out of light! They will save the customer money. By Replacing all outdoor lighting with solar lights there is no need to plug in to the electrical system. The lights will automatically turn on at dusk and will be charged during the day. They help out the environment.Not only does not plugging in to the power system save money but also energy, therefore protecting the Earth. Easy to Install No wires necessary, just pop in the battery. They come in all designs Just because they are solar lights doesn't

11

Data:72b22d28-179d-417f-83f5-80f86e12a95a | Open Energy Information  

Open Energy Info (EERE)

Sector: Lighting Description: Applicable for dusk to dawn lighting service by means of ballast operated lamp fixtures on a suitable wood pole. The service includes all electrical...

12

Data:5eae05f3-0992-4df8-9a69-3a7a990ad635 | Open Energy Information  

Open Energy Info (EERE)

Sector: Lighting Description: Applicable for dusk to dawn lighting service by means of ballast operated lamp fixtures on a suitable wood pole. The service includes all electrical...

13

Data:3df24d6a-96c8-4021-a306-676834ce4ff6 | Open Energy Information  

Open Energy Info (EERE)

Sector: Lighting Description: Applicable for dusk to dawn lighting service by means of ballast operated lamp fixtures on a suitable wood pole. The service includes all electrical...

14

Data:04ec1c93-4365-44d1-b890-9b179b25a1d6 | Open Energy Information  

Open Energy Info (EERE)

Sector: Lighting Description: Applicable for dusk to dawn lighting service by means of ballast operated lamp fixtures on a suitable wood pole. The service includes all electrical...

15

Data:1c28e1b7-7ac6-4b2e-a575-2a7647398603 | Open Energy Information  

Open Energy Info (EERE)

Sector: Lighting Description: Applicable for dusk to dawn lighting service by means of ballast operated lamp fixtures on a suitable wood pole. The service includes all electrical...

16

Data:Ddd53fc0-45e3-44e7-9e5a-d7e0371afc29 | Open Energy Information  

Open Energy Info (EERE)

Sector: Lighting Description: Applicable for dusk to dawn lighting service by means of ballast operated lamp fixtures on a suitable wood pole. The service includes all electrical...

17

Testbed Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Testbed Description R&D Overview 100G Testbed Testbed Description Testbed Results Current Testbed Research Proposal Process Terms and Conditions Virtual Circuits (OSCARS)...

18

Lighting | Open Energy Information  

Open Energy Info (EERE)

Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon Lighting Jump to: navigation, search TODO: Add description List of Lighting Incentives...

19

Lighting Development, Adoption, and Compliance Guide BUILDING TECHNOLOGIES PROGRAM I  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting Development, Adoption, and Compliance Guide BUILDING TECHNOLOGIES PROGRAM I Lighting Development, Adoption, and Compliance Guide BUILDING TECHNOLOGIES PROGRAM I Lighting BUILDING TECHNOLOGIES PROGRAM Development, Adoption, and Compliance Guide Lighting BUILDING TECHNOLOGIES PROGRAM September 2012 Prepared for the U.S. Department of Energy under Contract DE-AC05-76RL01830 | PNNL-SA-90653 Development, Adoption, and Compliance Guide 3.3 Exterior Lighting Controls ...........................................................................24 3.3.1 Dusk to Dawn Controls ...............................................................................25 3.3.2 Lighting Power Reduction Controls ........................................................25 3.3.3 Parking Garage Controls ............................................................................26

20

Data:Ad068fce-1967-4634-93f1-d6d742f406fa | Open Energy Information  

Open Energy Info (EERE)

Michigan (Utility Company) Effective date: 20120101 End date if known: Rate name: LED-100 Watt Metal Halide Equivalent: Dusk to Dawn Sector: Lighting Description: Rate D...

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

DESCRIPTION OF THE TRITIUM-PRODUCING BURNABLE ABSORBER ROD FOR THE COMMERCIAL LIGHT WATER REACTOR TTQP-1-015 Rev 19  

Science Conference Proceedings (OSTI)

Tritium-producing burnable absorber rods (TPBARs) used in the U.S. Department of Energy’s Tritium Readiness Program are designed to produce tritium when placed in a Westinghouse or Framatome 17x17 fuel assembly and irradiated in a pressurized water reactor (PWR). This document provides an unclassified description of the current design baseline for the TPBARs. This design baseline is currently valid only for Watts Bar reactor production cores. A description of the Lead Use TPBARs will not be covered in the text of the document, but the applicable drawings, specifications and test plan will be included in the appropriate appendices.

Burns, Kimberly A.; Love, Edward F.; Thornhill, Cheryl K.

2012-02-01T23:59:59.000Z

22

Stone Description  

Science Conference Proceedings (OSTI)

United States, Minnesota, Sandstone, Jordan, 9RA33, 26687, y, Front Face (South), Dscf0282.jpg. No 9RA33 is: Description. buff. rust-spotted. fine grain ...

23

Stone Description  

Science Conference Proceedings (OSTI)

United States, New York, Limestone, Sandy Hill, 8RA6, 26828, y, Front Face (South), Dscf0268_6.jpg. No 8RA6 is: Description. dark gray. fine grain. ...

24

Program Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Program Description Program Description Discover E (Engineering) is an evening of interesting, interactive and fun engineering, science, math, and technology demonstrations for K-12 students and their parents or guardians. It is held in conjunction with National Engineers Week which is celebrated at the time of George Washington's birthday, our nation's first President, who was a military engineer and land surveyor. Activities include 30-50 interactive demonstrations of basic engineering, science, technology and math principles that may include robots, reverse engineering, casting, crystal structures, forensic science, the effects of liquid nitrogen, slide rule, sound waves, electrostatics, mechanics, materials properties and materials

25

Program Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Program Description Program Description SAGE, the Summer of Applied Geophysical Experience, is a unique educational program designed to introduce students in geophysics and related fields to "hands on" geophysical exploration and research. The program emphasizes both teaching of field methods and research related to basic science and a variety of applied problems. SAGE is hosted by the National Security Education Center and the Earth and Environmental Sciences Division of the Los Alamos National Laboratory. * teaches modern geophysical exploration techniques: seismic reflection and refraction, gravity and magnetics, electromagnetics (including magnetotellurics), and electrical resistivity * involves extensive hands-on field experience * integrates geophysical methods to solve real

26

Project Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Project Description Project Description The Energy Policy Act of 2005 (EPAct 2005), the Energy Independence and Security Act of 2007 (EISA 2007), and Presidential Executive Order 13423 all contain requirements for Federal facilities to decrease energy consumption and increase the use of renewable energy by the year 2015. To provide leadership in meeting these requirements, DOE, in partnership with the General Services Administration (GSA), has installed a rooftop solar electric, or PV, system on the roof of DOE's headquarters in Washington, D.C. The 205 kilowatt (kW) installation is one of the largest of its kind in the Nation's capital. A display in the For- restal building will show the power output of the PV system during the day and the energy produced over

27

Problem Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Description Description Model Domain 2-D Radial Grid System : 1000 m x 60 m 25 m 25 m 10 m Hydrate Zone 1000 m Shale Shale Discretization Model 1 (200 x 30) r direction : 200 cells logarithmically distributed from r w = 0.10795 m to r 200 = 1000 m (inner most grid size Δr 1 = 0.02 m, see "P5_discretization.xls") z direction : 30 cells (5 x 5 m, 20 x 0.5 m, 5 x 5 m) Model 2 (200 x 11) r direction : 200 cells logarithmically distributed from r w = 0.10795 m to r 200 = 1000 m (inner most grid size Δr 1 = 0.02 m, see "P5_discretization.xls") z direction : 11 cells (5 x 5 m, 1 x 10.0 m, 5 x 5 m) Model 3 (50 x 30) r direction : 50 cells logarithmically distributed from r w = 0.10795 m to r 50 = 1000 m (inner most grid size Δr 1 = 0.02 m, see "P5_discretization.xls")

28

Lighting Controls/Sensors | Open Energy Information  

Open Energy Info (EERE)

Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon Lighting ControlsSensors Jump to: navigation, search TODO: Add description List of Lighting...

29

Research Project Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Project Description No job description found Current Research Opportunities Regulatory Science Course Development Fellowship Health and Medical Emergency Management...

30

Project Name/Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

RCA CM-3 Risk Management RCA CM-3 Risk Management Projects/Programs - RMPs, Tools, and SMEs Project Name/Description (see note below) DOE Program DOE RMP Contractor RMP Combined RMP Tools Database/Risk Analysis SMEs Federal/M&O/Consultant Integrated Biorefinery Research Facility Project EE X Research Support Facility Project EE X National Synchrotron Light Source II Project SC X 12 GeV Upgrade Project (TJL) SC X Physical Sciences Facility Project (PNNL) SC X P6, Pertmaster, Excel Mike Shay, Jason Gatelum ITER SC X (internation al pgm) P6, Pertmaster, Risk Checklist, Risk Assessor Handbook John Tapia, Colin Williams, Allen Bishop SING & SING II (SNS, OR) SC X Excel, Analytic Hierarchy, P6 Barbara Thibadeau Modernization of Lab Fac. (ORNL)

31

Characteristics of spent fuel, high-level waste, and other radioactive wastes which may require long-term isolation: Appendix 2A, Physical descriptions of LWR (Light-Water Reactor) fuel assemblies  

SciTech Connect

This appendix includes a four-page Physical Description report for each assembly type identified from the current data. Where available, a drawing of an assembly follows the appropriate Physical Description report. If no drawing is available for an assembly, a cross-reference to a similar assembly is provided if possible. For Advanced Nuclear Fuels, Babcock and Wilcox, Combustion Engineering, and Westinghouse assemblies, information was obtained via subcontracts with these fuel vendors. Data for some assembly types are not available. For such assemblies, the information shown in this report was obtained from the open literature and by inference from reload fuels made by other vendors. Efforts to obtain additional information are continuing. Individual Physical Description reports can be generated interactively through the menu-driven LWR Assemblies Data Base system. These reports can be viewed on the screen or directed to a printer. Special reports and compilations of specific data items can be produced on request.

Not Available

1987-12-01T23:59:59.000Z

32

The Recovery Act is "Lighting Up" the streets of Philadelphia...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The Recovery Act is "Lighting Up" the streets of Philadelphia The Recovery Act is "Lighting Up" the streets of Philadelphia Addthis Description The Philadelphia Streets Department...

33

Laboratory Equipment - DynaPro NanoStar Dynamic Light ...  

Science Conference Proceedings (OSTI)

DynaPro NanoStar Dynamic Light Scattering. Description: Location: E136. The DynaPro NanoStar is a dynamic light scattering ...

2012-10-31T23:59:59.000Z

34

Towards Service Description Logics  

Science Conference Proceedings (OSTI)

Semantic service description and matchmaking are needed in embedded and disappearing computing, cooperative multiagent systems, and the semantic web. Standard program semantics formalizations are not suited to modeling service semantics, because they ... Keywords: description logics, semantic web

Piero A. Bonatti

2002-09-01T23:59:59.000Z

35

Lighting Choices to Save You Money Banner | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

lightingcenterpiece.jpg Description Low-resolution version of the Lighting Choices to Save You Money banner....

36

NIST SCATMECH: Polarized light scattering C++ class library  

Science Conference Proceedings (OSTI)

SCATMECH: Polarized light scattering C++ class library. Description/ Summary: SCATMECH is an object-oriented C++ class ...

2012-10-02T23:59:59.000Z

37

Light-Light Scattering  

E-Print Network (OSTI)

For a long time, it is believed that the light by light scattering is described properly by the Lagrangian density obtained by Heisenberg and Euler. Here, we present a new calculation which is based on the modern field theory technique. It is found that the light-light scattering is completely different from the old expression. The reason is basically due to the unphysical condition (gauge condition) which was employed by the QED calcualtion of Karplus and Neumann. The correct cross section of light-light scattering at low energy of $(\\frac{\\omega}{m} \\ll 1)$ can be written as $ \\displaystyle{\\frac{d\\sigma}{d\\Omega}=\\frac{1}{(6\\pi)^2}\\frac{\\alpha^4} {(2\\omega)^2}(3+2\\cos^2\\theta +\\cos^4\\theta)}$.

Kanda, Naohiro

2011-01-01T23:59:59.000Z

38

Light-Light Scattering  

E-Print Network (OSTI)

For a long time, it is believed that the light by light scattering is described properly by the Lagrangian density obtained by Heisenberg and Euler. Here, we present a new calculation which is based on the modern field theory technique. It is found that the light-light scattering is completely different from the old expression. The reason is basically due to the unphysical condition (gauge condition) which was employed by the QED calcualtion of Karplus and Neumann. The correct cross section of light-light scattering at low energy of $(\\frac{\\omega}{m} \\ll 1)$ can be written as $ \\displaystyle{\\frac{d\\sigma}{d\\Omega}=\\frac{1}{(6\\pi)^2}\\frac{\\alpha^4} {(2\\omega)^2}(3+2\\cos^2\\theta +\\cos^4\\theta)}$.

Naohiro Kanda

2011-06-03T23:59:59.000Z

39

light-duty | OpenEI  

Open Energy Info (EERE)

Login | Sign Up Wiki Apps Datasets Browse Upload data GDR Community Linked Data Search Share this page on Facebook icon Twitter icon light-duty Dataset Summary Description...

40

Equational descriptions of languages ?  

E-Print Network (OSTI)

This paper is a survey on the equational descriptions of languages. The first part is devoted to Birkhoff’s and Reiterman’s theorems on equational descriptions of varieties. Eilenberg’s variety theorem and its successive generalizations form the second part. The more recent results on equational descriptions of lattices of languages are presented in the third part of the paper. Equations have been used for a long time in mathematics to provide a concise description of various mathematical objects. This article roughly follows a historical approach to present such equational descriptions for formal languages, ranging over a period of 45 years: from Schützenberger’s characterization of star-free languages [36] to the following recent result of [18]: Every lattice of languages admits an equational description. This evolution was made possible by a gradual abstraction of the notion of equation. The story really starts in 1935 with Birkhoff’s theorem on equational

Jean-éric Pin

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Plan Descriptions & Summaries  

NLE Websites -- All DOE Office Websites (Extended Search)

Plan Descriptions & Summaries Retiree Insurance Plans Retiree health and welfare benefits are managed by AonHewitt and Associates. Contact Retiree Insurance Providers Plan...

42

LED Lighting  

Energy.gov (U.S. Department of Energy (DOE))

Light-emitting diodes (LEDs) are light sources that differ from more traditional sources of light in that they are semiconductor devices that produce light when an electrical current is applied....

43

?-connections of Description Logics  

E-Print Network (OSTI)

this paper is to summarize the general transfer results for E- connections that have recently been obtained in [7]. The generality of the results is due to the fact that are defined and investigated using the framework of so-called abstract description systems (ADSs), a common generalization of description logics, modal logics, logics of time and space, and many other logical formalisms [2]. Thus, we can connect not only DLs with DLs, but also, say, description logics with spatial logics [8]. A natural interpretation of link relations in this context would then be, for instance, to describe the spatial extension of abstract (DL) objects

Oliver Kutz; Carsten Lutz; Frank Wolter; Michael Zakharyaschev

2003-01-01T23:59:59.000Z

44

The light-front vacuum and dynamics  

E-Print Network (OSTI)

I give a quantum theoretical description of kinematically invariant vacuua on the algebra of free fields restricted to a light front and discuss the relation between the light-front Hamiltonian, P-, the vacuum, and Poincare invariance. This provides a quantum theoretical description of zero modes.

W. N. Polyzou

2004-09-22T23:59:59.000Z

45

Processor Description Languages  

Science Conference Proceedings (OSTI)

Efficient design of embedded processors plays a critical role in embedded systems design. Processor description languages and their associated specification, exploration and rapid prototyping methodologies are used to find the best possible design for ... Keywords: Computer Architecture, Computer Science

Prabhat Mishra; Nikil Dutt

2008-05-01T23:59:59.000Z

46

B Plant facility description  

SciTech Connect

Buildings 225B, 272B, 282B, 282BA, and 294B were removed from the B Plant facility description. Minor corrections were made for tank sizes and hazardous and toxic inventories.

Chalk, S.E.

1996-10-04T23:59:59.000Z

47

Lighting Techniques  

Science Conference Proceedings (OSTI)

...Lighting is very critical in photography. The specimen should be placed on a background which will not detract from the resolution of the fracture surface. For basic lighting, one spotlight is suggested. The light is then raised or lowered, and

48

University Location Project Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Location Project Description Location Project Description Boise State University Boise, Idaho Boise State University has undertaken a study of the structural setting and geothermal potential at Neal Hot Springs that will integrate geology, geochemistry, and geophysics to analyze the site on the western Snake River plain. Boise State will determine if Neal Hot Springs sustains the necessary rock dilation and conduit pathways for hydrothermal fluid flow and successful geothermal development. The result will be new data acquisition, including a deep geophysical survey and fault surface data. Colorado School of Mines Golden, Colorado Colorado School of Mines will conduct an investigation near Homedale, Idaho, an area that straddles volcanic rock and unconsolidated sediments.

49

Detailed Course Module Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Course Module Description Course Module Description Module/Learning Objectives Level of Detail in Module by Audience Consumers Gen Ed/ Community College Trades 1. Energy Issues and Building Solutions High High High Learning Objectives: * Define terms of building science, ecological systems, economics of consumption * Relate building science perspective, ecology, social science * Explain historical energy and environmental issues related to buildings * Compare Site and source energy * Examine the health, safety and comfort issues in buildings * Examine the general context for building solutions (zero energy green home with durability as the goal) * Explain a basic overview of alternative energy (total solar flux) - do we have enough energy * Examine cash flow to homeowners

50

Lighting Group: Light Distribution Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Retrofit Alternatives to Incandescent Downlights Hotel and Institutional Bathroom Lighting Portable Office Lighting Systems Low Glare Outdoor Retrofit Luminaire LED Luminaires...

51

Lighting Research Center Lighting Products  

Science Conference Proceedings (OSTI)

... 12) Solid State Lighting Luminaires - Color Characteristic Measurements. [22/S04] IES LM-16:1993 Practical Guide to Colorimetry of Light Sources. ...

2013-07-26T23:59:59.000Z

52

Outlaw lighting  

SciTech Connect

Demand-side management programs by utilities and the federal government`s Green Lights program have made significant inroads in promoting energy-efficient lighting. But the Energy Policy Act now prohibits certain types of lighting. This article provides analysis to help architects determine new lamp performance compared with older lighting products.

Bryan, H.

1994-12-01T23:59:59.000Z

53

Format for Generic Task Description  

Science Conference Proceedings (OSTI)

Task: Submitting Proposals. Containing Scenario: Fast Tracking a Battery Standard Description: Review of the proposed ...

54

Laboratory Equipment - DynaPro-LSR 99-E-15 Dynamic Light ...  

Science Conference Proceedings (OSTI)

DynaPro-LSR 99-E-15 Dynamic Light Scattering. Description: Location: N/A. Specifications / Capabilities: Uses: Measuring ...

2012-10-31T23:59:59.000Z

55

NAICS Codes Description:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Codes Codes Description: Filters: Date Signed only show values between '10/01/2006' and '09/30/2007', Contracting Agency ID show only ('8900'), Contracting Office ID show only ('00001') Contracting Agency ID: 8900, Contracting Office ID: 00001 NAICS Code NAICS Description Actions Action Obligation 541519 OTHER COMPUTER RELATED SERVICES 251 $164,546,671 541611 ADMINISTRATIVE MANAGEMENT AND GENERAL MANAGEMENT CONSULTING SERVICES 236 $52,396,806 514210 DATA PROCESSING SERVICES 195 $28,941,727 531210 OFFICES OF REAL ESTATE AGENTS AND BROKERS 190 $6,460,652 541330 ENGINEERING SERVICES 165 $33,006,079 163 $11,515,387 541690 OTHER SCIENTIFIC AND TECHNICAL CONSULTING SERVICES 92 $40,527,088 531390 OTHER ACTIVITIES RELATED TO REAL ESTATE 79 -$659,654 337214 OFFICE FURNITURE (EXCEPT WOOD) MANUFACTURING 78 $1,651,732

56

Proposal Review Panel Descriptions  

NLE Websites -- All DOE Office Websites (Extended Search)

Proposal Review Panel Descriptions Proposal Review Panel Descriptions To ensure competent scientific review, a proposal may be assigned to a different panel (at the discretion of the Review Panel Chair), or the panel may seek additional ad hoc reviews from other experts. High-Pressure This panel reviews scattering and diffraction proposals that focus on materials at high pressure. Techniques such as (but not limited to) diffraction, nuclear resonant scattering, and inelastic x-ray scattering for materials at high pressure are appropriate for this panel to consider. Instrumentation This panel reviews proposals related to the development of beamline instrumentation, sample environments, x-ray optical components, and/or detectors that are relevant to synchrotron radiation research. This panel

57

Descriptions of Past Research  

Science Conference Proceedings (OSTI)

This product is a compilation of over one-hundred product summaries describing EPRI research performed over the previous twenty years. The summaries are arranged according to categories of generators, steam turbines, software, Technology Innovation (formerly Strategic Science and Technology) reports, and miscellaneous. Each product summary contains an abstract, a description of objective, approach, and results, and an EPRI perspective. This document is a useful reference resource for EPRI member organiza...

2006-05-19T23:59:59.000Z

58

SSL Selections Descriptions v6.xls  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Zip Code Zip Code Project Description DOE Funding Total Project Value Cambrios Sunnyvale, CA 94085-4520 Solution-Processable Transparent Conductive Hole Injection Electrode for Organic Light-Emitting Diode (OLED) SSL. This project seeks to develop a cost-effective replacement for indium tin oxide for use as an electrode in OLED lighting devices. Indium is both rare and very expensive. $1,199,971 $1,846,110 University of Rochester Rochester, NY 14627-0216 Development and Utilization of Host Materials for White Phosphorescent OLEDs. This project seeks to produce white OLEDs with > 100 lm/W efficiency after light extraction enhancement and > 10,000 hour operating time, by making a new class of emissive materials. $1,239,071 $1,376,746 WhiteOptics, LLC

59

Lighting Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

corridors. The overall range of savings was six to 80 percent. The Advanced Lighting Guidelines On-Line Edition New Buildings Institute 2011 presents a table of lighting energy...

60

MCO Monitoring activity description  

Science Conference Proceedings (OSTI)

Spent Nuclear Fuel remaining from Hanford's N-Reactor operations in the 1970s has been stored under water in the K-Reactor Basins. This fuel will be repackaged, dried and stored in a new facility in the 200E Area. The safety basis for this process of retrieval, drying, and interim storage of the spent fuel has been established. The monitoring of MCOS in dry storage is a currently identified issue in the SNF Project. This plan outlines the key elements of the proposed monitoring activity. Other fuel stored in the K-Reactor Basins, including SPR fuel, will have other monitoring considerations and is not addressed by this activity description.

SEXTON, R.A.

1998-11-09T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Shape the light, light the shape - lighting installation in performance.  

E-Print Network (OSTI)

??This thesis investigates the lighting design theory Light Inside Out, which is the technique of shaping light toward a creation of lighting installation in performance… (more)

Yu, Lih-Hwa, 1972-

2010-01-01T23:59:59.000Z

62

Lighting Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Purple LED lamp Purple LED lamp Lighting Systems Lighting research is aimed at improving the energy efficiency of lighting systems in buildings and homes across the nation. The goal is to reduce lighting energy consumption by 50% over twenty years by improving the efficiency of light sources, and controlling and delivering illumination so that it is available, where and when needed, and at the required intensity. Research falls into four main areas: Sources and Ballasts, Light Distribution Systems, Controls and Communications, and Human Factors. Contacts Francis Rubinstein FMRubinstein@lbl.gov (510) 486-4096 Links Lighting Research Group Batteries and Fuel Cells Buildings Energy Efficiency Applications Commercial Buildings Cool Roofs and Heat Islands Demand Response Energy Efficiency Program and Market Trends

63

Number: 1394 Description: In what ...  

Science Conference Proceedings (OSTI)

... Number: 1752 Description: When was the Oklahoma City bombing? ... name of the plane that dropped the Atomic Bomb on Hiroshima? ...

2003-02-12T23:59:59.000Z

64

Number: 894 Description: How far is it ...  

Science Conference Proceedings (OSTI)

... Number: 1198 Description: When was Hiroshima bombed? ... 1264 Description: What is the atomic weight of ...

2002-04-29T23:59:59.000Z

65

Minimum Description Length Model Selection  

E-Print Network (OSTI)

Minimum Description Length Model Selection Problems and Extensions Steven de Rooij #12;#12;Minimum Description Length Model Selection Problems and Extensions #12;ILLC Dissertation Series DS-2008-07 For further-mail: illc@science.uva.nl homepage: http://www.illc.uva.nl/ #12;Minimum Description Length Model Selection

66

Description of Proposed Action  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Carlsbad Field Office Carlsbad Field Office RECORD OF CATEGORICAL EXCLUSION DETERMINATION 1 Description of Proposed Action Performance of a three-dimensional seismic survey line on approximately 2,409 acres contained within the WIPP Land Withdrawal Area as part of a larger survey to determine whether hydrocarbons are present in the region in quantities that warrant extraction and development. Number and Title of Applicable Categorical Exclusion B3.1 Site Characterization/Environmental Monitoring Activities covered by this Categorical Exclusion include, but are not limited to, site characterization and environmental monitoring under CERCLA and RCRA. Specific activities include, but are not limited to: (a) Geological, geophysical (such as gravity, magnetic, electrical, seismic, and radar), geochemical, and

67

YUCCA MOUNTAIN SITE DESCRIPTION  

SciTech Connect

The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

A.M. Simmons

2004-04-16T23:59:59.000Z

68

YUCCA MOUNTAIN SITE DESCRIPTION  

SciTech Connect

The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

A.M. Simmons

2004-04-16T23:59:59.000Z

69

Commercial Lighting and LED Lighting Incentives  

Energy.gov (U.S. Department of Energy (DOE))

Incentives for energy efficient commercial lighting equipment as well as commercial LED lighting equipment are available to businesses under the Efficiency Vermont Lighting and LED Lighting...

70

Northern Lights  

NLE Websites -- All DOE Office Websites (Extended Search)

Northern Lights Northern Lights Nature Bulletin No. 178-A February 6, 1965 Forest Preserve District of Cook County Seymour Simon, President Roland F. Eisenbeis, Supt. of Conservation NORTHERN LIGHTS To a person seeing the Aurora Borealis or "northern lights" for the first time, it is an uncanny awe-inspiring spectacle. Sometimes it begins as a glow of red on the northern horizon, ominously suggesting a great fire, gradually changing to a curtain of violet-white, or greenish-yellow light extending from east to west. Some times this may be transformed to appear as fold upon fold of luminous draperies that march majestically across the sky; sometimes as a vast multitude of gigantic flaming swords furiously slashing at the heavens; sometimes as a flowing crown with long undulating colored streamers fanning downward and outward.

71

Integrated Safety Management (ISM) - System Descriptions  

NLE Websites -- All DOE Office Websites (Extended Search)

System Descriptions Integrated Safety Management (ISM) ism logo Sample DOE Contractor ISM System Descriptions Sample DOE Site Office ISM System Descriptions DOE HQ Program Office...

72

Light Organizing/Organizing Light [Light in Place  

E-Print Network (OSTI)

a street through alter­ nating areas of dark and light, welandscapes, streets and squares. Light summons our spiritfor changing light, both outside rooms (such as streets and

Schwartz, Martin

1992-01-01T23:59:59.000Z

73

Original Workshop Proposal and Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Workshop Proposal and Description Visualization Requirements for Computational Science and Engineering Applications Proposal for a DoE Workshop to Be Held at the...

74

The fuzzy description logic ALCFLH  

E-Print Network (OSTI)

We present the fuzzy description logic ALCF LH. ALCF LH is based on ALCF H, but linear hedges are used instead of exponential ones. This allows to solve the entailment and the subsumption problem in a fuzzy description logic, where arbitrary concepts and roles may be modified. 1

Steffen Hölldobler; Nguyen Hoang Nga; Technische Universität Dresden; Tran Dinh Khang

2005-01-01T23:59:59.000Z

75

Solid-State Lighting: LED Lighting Facts  

NLE Websites -- All DOE Office Websites (Extended Search)

Market-Based Programs Printable Version Share this resource Send a link to Solid-State Lighting: LED Lighting Facts to someone by E-mail Share Solid-State Lighting: LED Lighting Facts on Facebook Tweet about Solid-State Lighting: LED Lighting Facts on Twitter Bookmark Solid-State Lighting: LED Lighting Facts on Google Bookmark Solid-State Lighting: LED Lighting Facts on Delicious Rank Solid-State Lighting: LED Lighting Facts on Digg Find More places to share Solid-State Lighting: LED Lighting Facts on AddThis.com... LED Lighting Facts CALiPER Program Standards Development Technical Information Network Gateway Demonstrations Municipal Consortium Design Competitions LED Lighting Facts LED lighting facts - A Program of the U.S. DOE DOE's LED Lighting Facts® program showcases LED products for general

76

Solid-State Lighting: Project Reports  

NLE Websites -- All DOE Office Websites (Extended Search)

Project Reports to someone by Project Reports to someone by E-mail Share Solid-State Lighting: Project Reports on Facebook Tweet about Solid-State Lighting: Project Reports on Twitter Bookmark Solid-State Lighting: Project Reports on Google Bookmark Solid-State Lighting: Project Reports on Delicious Rank Solid-State Lighting: Project Reports on Digg Find More places to share Solid-State Lighting: Project Reports on AddThis.com... Conferences & Meetings Presentations Publications Postings Articles Program Fact Sheets Technology Fact Sheets CALiPER Reports GATEWAY Reports LED Lighting Facts Reports Project Reports Studies and Reports Technology Roadmaps Product Performance Guides Webcasts Videos Tools Project Reports This page contains links to project reports summarizing the solid-state lighting projects funded by DOE, providing project descriptions and

77

Light Computing  

E-Print Network (OSTI)

A configuration of light pulses is generated, together with emitters and receptors, that allows computing. The computing is extraordinarily high in number of flops per second, exceeding the capability of a quantum computer for a given size and coherence region. The emitters and receptors are based on the quantum diode, which can emit and detect individual photons with high accuracy.

Gordon Chalmers

2006-10-13T23:59:59.000Z

78

EK101 Engineering Light Smart Lighting  

E-Print Network (OSTI)

extensively in concert lighting and are finding increased usage in dance lighting because refers to the upstage back curtain (is white or a light color), which can be us for lighting or special Mixer #12;Monitor House speaker Lighting System Control Board: Similar to the sound board, the light

Bifano, Thomas

79

Advanced Lighting Technologies Application Guidelines: 1990  

SciTech Connect

The Advanced Lighting Technologies Application Guidelines document consists of eight guidelines that provide an overview of specific lighting technologies and design application techniques utilizing energy-efficient lighting products. Lighting Design Practice assesses energy-efficient lighting strategies and explains how to obtain quality lighting design and consulting services. Luminaries and Lighting Systems surveys advanced lighting fixture products designed to take advantage of current energy-efficient lamp technologies and includes luminaire tables to allow users to collect photometric performance characteristics for common commercial luminaires. Each of the remaining six guidelines -- Computer-Aided Lighting Design, Energy-efficient and Electronic Ballasts, Full-Size Fluorescent Lamps, Compact Fluorescent Lamps, Conventional Shape Tungsten-Halogen Lamps, and Compact Metal Halide and White High Pressure Sodium Lamps -- includes a technology overview section, a description of current products available on the market, and an applications section. The document is intended for use by electric utility personnel involved in lighting programs, lighting designers, electrical engineers, architects, lighting manufacturers' representatives, and other lighting professionals.

Eley, C. (Eley (Charles) Associates, San Francisco, CA (United States))

1992-09-01T23:59:59.000Z

80

Texas Electric Lighting Report  

NLE Websites -- All DOE Office Websites (Extended Search)

electric lighting electric lighting The SNAP House's lighting design aims for elegant simplicity in concept, use, and maintenance. Throughout the house, soft, ambient light is juxtaposed with bright, direct task lighting. All ambient and most task lighting is integrated directly into the architectural design of the house. An accent light wall between the bedroom and bathroom provides a glowing light for nighttime navigation.

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Light Emitting Diode (LED) Lighting and Systems  

Science Conference Proceedings (OSTI)

This EPRI Technical Update addresses the most promising and unique energy efficient light source light emitting diode (LED) lighting. Business and technical market factors (Chapter 2) explain the upcoming growth of the LED and LED lighting market. Future technical improvements to LEDs and systems are also emphasized. Discussion of the importance of utility involvement in helping their customers make the switch from traditional lighting to LED lighting is provided. LED lighting technologies are covered in...

2007-12-21T23:59:59.000Z

82

Description  

E-Print Network (OSTI)

When incorrect prices are determined in the market, the IMO can replace the incorrect prices with administered prices in accordance with the Market Rules within two business days. Suppliers and consumers that respond to high prices that are later determined to be incorrect and replaced by lower administered prices lose significant production and income and become hesitant to respond to price signals otherwise provided. To increase their confidence in the price signals, they market participants would like to be compensated for losses in the event that prices are corrected/administered and they would like to be notified of potential price corrections as close to real-time as possible. Non-market participants who independently respond to pricing signals in the market may also suffer from a loss of production and income as a result of incorrectly posted prices. However, the issues related to non-market participants will not be included in this particular discussion. Background The current Market Rules allow for the IMO to administer price when the market

unknown authors

2004-01-01T23:59:59.000Z

83

Description  

E-Print Network (OSTI)

When incorrect prices are determined in the market, the IMO can replace the incorrect prices with administered prices in accordance with the Market Rules within two business days. Suppliers and consumers that respond to high prices that are later determined to be incorrect and replaced by lower administered prices may lose significant production and income and subsequently become hesitant to respond to price signals otherwise provided. To increase their confidence in the price signals, they market participants would like to be compensated for losses in the event that prices are corrected/administered and they would like to be notified of potential price corrections as close to real-time as possible. Non-market participants who independently respond to pricing signals in the market may also suffer from a loss of production and income as a result of incorrectly posted prices. However, the issues related to non-market participants will not be included inunder this particular discussionissue. Background The current Market Rules allow for the IMO to administer price when the market pricing mechanisms are not functioning normally (Chapter 7, Section 8,4). More specifically, the IMO will administer prices under in the following three situations: • Failure to publish prices due to a forced or planned outage to the hardware, software or communications systems that support the dispatch algorithm • The published prices are incorrect due to incorrect inputs to the dispatch algorithm • Market suspension There have been a number of occasions when prices have been administered, such as during the market suspension resulting from the August 2003 blackout or, more typically, on occasions when market related systems fail or are on outage. Often price is administered automatically before incorrect prices can be published, but at times the incorrect prices cannot and are not detected before being published and must be changed after the fact.

unknown authors

2004-01-01T23:59:59.000Z

84

Description  

E-Print Network (OSTI)

A handbook for executives and non-executives in healthcare organisations February 2006DH INFORMATION READER BOX Policy HR / Workforce

unknown authors

2006-01-01T23:59:59.000Z

85

Description of CBECS Building Types  

U.S. Energy Information Administration (EIA) Indexed Site

Description of Building Types Description of Building Types Description of CBECS Building Types In the Commercial Buildings Energy Consumption Survey (CBECS), buildings are classified according to principal activity, which is the primary business, commerce, or function carried on within each building. Buildings used for more than one of the activities described below are assigned to the activity occupying the most floorspace at the time of the interview. Thus, a building assigned to a particular principal activity category may be used for other activities in a portion of its space or at some time during the year. In the 1999 CBECS, respondents were asked to place their building into a sub-category that was a more specific activity than has been collected in prior surveys. This was done to ensure the quality of the data; after data collection, the subcategories were combined into these more general building categories, which are consistent with prior CBECS surveys.

86

Notices Description: Entergy Services, Inc.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

19 Federal Register 19 Federal Register / Vol. 76, No. 139 / Wednesday, July 20, 2011 / Notices Description: Entergy Services, Inc. Response to May 13, 2011 Deficiency Letter. Filed Date: 07/12/2011. Accession Number: 20110712-5164. Comment Date: 5 p.m. Eastern Time on Tuesday, August 02, 2011. Docket Numbers: ER11-2206-001. Applicants: Alta Wind V, LLC. Description: Alta Wind V, LLC, Notice of Non-Material Change in Status. Filed Date: 07/13/2011. Accession Number: 20110713-5091. Comment Date: 5 p.m. Eastern Time on Wednesday, August 03, 2011. Docket Numbers: ER11-3727-001. Applicants: El Segundo Energy Center LLC. Description: El Segundo Energy Center LLC submits tariff filing per 35.17(b): Supplement to Application for Market-Based Rate Authority to be effective 8/5/2011.

87

CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT  

Science Conference Proceedings (OSTI)

The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.

J.F. Beesley

2005-04-21T23:59:59.000Z

88

Science Accelerator Resource Descriptions, Office of Scientific...  

NLE Websites -- All DOE Office Websites (Extended Search)

Resource Descriptions Below you will find descriptions of each of the scientific and technical resources searchable in the Science Accelerator. DOE Data Explorer Locate collections...

89

Baseline descriptions for LWR spent fuel storage, handling, and transportation  

SciTech Connect

Baseline descriptions for the storage, handling, and transportation of reactor spent fuel are provided. The storage modes described include light water reactor (LWR) pools, away-from-reactor basins, dry surface storage, reprocessing-facility interim storage pools, and deep geologic storage. Land and water transportation are also discussed. This work was sponsored by the Department of Energy/Office of Safeguards and Security as part of the Sandia Laboratories Fixed Facility Physical Protection Program. 45 figs, 4 tables.

Moyer, J.W.; Sonnier, C.S.

1978-04-01T23:59:59.000Z

90

Energy and lighting design  

SciTech Connect

A detailed examination of the current energy conservation practices for lighting systems is presented. This first part of a two-part presentation covers the following: energy and lighting design; lighting and energy standards; lighting efficiency factors; light control and photometrics; lighting and the architectural interior; luminaire impact on the environment; basic design techniques; the lighting power budget; and conservation through control.

Helms, R.N.

1979-11-01T23:59:59.000Z

91

Light Emitting Diodes and General Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Light Emitting Diodes and General Lighting Speaker(s): Martin Moeck Date: August 6, 2009 - 12:00pm Location: 90-3122 We give a short overview on high-power light emitting diodes,...

92

Microscopic Description of Induced Fission  

E-Print Network (OSTI)

Selected aspects of the description of neutron-induced fission in 240Pu in the framework of the nuclear energy density functional theory at finite temperature are presented. In particular, we discuss aspects pertaining to the choice of thermodynamic state variables, the evolution of fission barriers as function of the incident neutron energy, and the temperatures of the fission fragments.

N. Schunck

2013-02-22T23:59:59.000Z

93

Evaluation of Lighting and Lighting Control Technologies  

Science Conference Proceedings (OSTI)

Energy efficient lighting and lighting controls have been a means to significant energy savings for many facilities around the world. Advances in lighting sources often allow for the conservation of quality of light while providing more flexibility in the control of light. Additionally, advances in core technologies within the lighting marketplace regularly lead to the introduction of new lamps, fixtures and controls.  With the rapid introduction of new products and designs, it is important to ...

2013-11-15T23:59:59.000Z

94

Lighting Group: Controls: PIER Lighting Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

PIER Lighting Projects CEC Public Interest Energy Research (PIER) Projects Objective Lighting controls are often expensive, complex, hard to commission properly and difficult to...

95

Architectural Lighting Analysis in Virtual Lighting Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Architectural Lighting Analysis in Virtual Lighting Laboratory NOTICE Due to the current lapse of federal funding, Berkeley Lab websites are accessible, but may not be updated...

96

Physics of light  

Science Conference Proceedings (OSTI)

A fourth interpretation for the principle of light invariance is proposed. After Maxwell equations, relativity, Lorentz group, another possibility stands into consider the Lorentz group representations as species. By specie one means fields with same nature under light invariance. For instance, given a ((1/2),(1/2)) representation, instead of just one specific field, we should associate to it the potential fields specie. Thus, starting from such fields specie interpretation the features of a certain potential field A{sub {mu}I} will be determined in terms of its associated fields set {l_brace}A{sub {mu}I}{r_brace}, where I means a diversity index. It says that, the original field equation to be searched for a given field description is that one corresponding to the associated group of fields, and not more, for the field being taken isolated. It introduces the meaning of parts enfolded in the whole through whole relativistic equations. There is a more primitive equation to be understood. Instead Maxwell equation this fourth light invariance interpretation is guiding us to a more basic equation describing a fields set {l_brace}A{sub {mu}I}{r_brace}. It will be entitled as Global Maxwell equation. Three steps are necessary for characterizing this Global Maxwell equation. The first one is to derive on abelian terms a generic expression for the fields set {l_brace}A{sub {mu}I}{r_brace}. Further, show the diversity between these associated fields. Prove that every field carries a different quantum number (spin, mass, charges; C, P, T, CPT). The third one is on the photon singularity. Being the light invariance porter, it should be distinguished from others fields. This is done through the group gauge directive symmetry and Noether current. A Global Lorentz force complements the Global Maxwell by introducing three types of force. The first one generalizes the usual Lorentz force while the last two introduce relationships between fields and masses and fields with fields. A Physics of Light is derived. Based on such interpretation relating fields with same Lorentz nature, the electromagnetism is enlarged. The electromagnetic phenomena is not more restricted to Maxwell and electric charge. It englobes Maxwell and produces new types of electromagnetic fields and sectors. It centers the photon at its origin, new aspects as photonic charges and selfinteracting photons are obtained. As a case of this new electromagnetic spectrum one can take the set {l_brace}{gamma}Z{sup 0},W{sup {+-}}{r_brace}. It provides an electromagnetism involving photonic, massive, neutral, electric charged sectors which may antecede the electroweak unification.

Doria, R. [Aprendanet, Petropolis, 25600 (Brazil)

2012-09-24T23:59:59.000Z

97

Simulations of the neutral structure within the dusk side aurora  

E-Print Network (OSTI)

some de- pendence on geomagnetic activity level. However,a correlation between the geomagnetic activity level and thethe observing period. The geomagnetic activity was between

Parish, H F; Lyons, L R

2006-01-01T23:59:59.000Z

98

Text REtrieval Conference (TREC) System Description  

Science Conference Proceedings (OSTI)

Text REtrieval Conference (TREC) System Description. Organization Name: Los Alamos National Laboratory, Run ID: lanl981. ...

99

LED Traffic Light as a Communications Device Grantham Pang, Thomas Kwan, Chi-Ho Chan, Hugh Liu.  

E-Print Network (OSTI)

:http://www.eee.hku.hk/~gpang Abstract The visible light from an LED (light emitting diode) traffic light can be modulated and encoded on the description of an audio information system made up of high brightness, visible light emitting diodes (LEDs messages 1. Introduction Recently, high intensity light emitting diodes for traffic signals are available

Pang, Grantham

100

Description of CBECS Building Types  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Energy Consumption Survey (CBECS) > Description of Building Types Description of CBECS Building Types In the Commercial Buildings Energy Consumption Survey (CBECS), buildings are classified according to principal activity, which is the primary business, commerce, or function carried on within each building. Buildings used for more than one of the activities described below are assigned to the activity occupying the most floorspace at the time of the interview. Thus, a building assigned to a particular principal activity category may be used for other activities in a portion of its space or at some time during the year. In the 1999 and 2003 CBECS, respondents were asked to place their building into a sub-category that was a more specific activity than has been collected in prior surveys. This was done to ensure the quality of the data; after data collection, the subcategories were combined into these more general building categories, which are consistent with prior CBECS surveys.

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Quality Assurance Requirements and Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

QjCivilianRadioactive QjCivilianRadioactive Was'fe Management QA: QA QVALITY ASSURANCE REQUIREMENTS AND DESCRIPTION DOEIRW-0333P Revisiol1 20 Effective Date: 10-01-2008 LarrY Newman, DlrectQr Office of Quality As,surance ~~--~-_._._- Edward F. Spr at III, Di or Office of Civilian Radioactive Waste Management Date I/Jf/4t' , . - - - Date OCRWM Title: Quality Assurance Requirements and Description DOEIRW-0333P, Revision 20 Office of Civilian Radioactive Waste Management Quality Assurance Policy Page: 2 of 160 Successful implementation of the Office of Civilian Radioactive Waste Management (OCRWM) Quality Assurance (QA) program is essential for the OCRWM to carry out its mission. Our mission is to manage and dispose ofbigh-Ievel radioactive waste and spent nuclear fuel in a manner that protects health, safety, and the environment; enhances national and energy security; and merits

102

Next Generation Light Source  

•Next Generation Light Source – Super Thin Light Bulb, Energy Efficient, Long Life, Dimmable, and Uniform Illumination •High Entry Barrier – 71 ...

103

Developmental Light-Water Reactor Program  

SciTech Connect

This report summarizes the progress of the Developmental Light-Water Reactor (DLWR) Program at Oak Ridge National Laboratory in FY 1989. It also includes (1) a brief description of the program, (2) definition of goals, (3) earlier achievements, and (4) proposed future activities.

Forsberg, C.W.

1989-12-01T23:59:59.000Z

104

First Light  

E-Print Network (OSTI)

The first dwarf galaxies, which constitute the building blocks of the collapsed objects we find today in the Universe, had formed hundreds of millions of years after the big bang. This pedagogical review describes the early growth of their small-amplitude seed fluctuations from the epoch of inflation through dark matter decoupling and matter-radiation equality, to the final collapse and fragmentation of the dark matter on all mass scales above \\~10^{-4} solar masses. The condensation of baryons into halos in the mass range of ~10^5-10^{10} solar masses led to the formation of the first stars and the re-ionization of the cold hydrogen gas, left over from the big bang. The production of heavy elements by the first stars started the metal enrichment process that eventually led to the formation of rocky planets and life. A wide variety of instruments currently under design [including large-aperture infrared telescopes on the ground or in space (JWST), and low-frequency arrays for the detection of redshifted 21cm radiation], will establish better understanding of the first sources of light during an epoch in cosmic history that was largely unexplored so far. Numerical simulations of reionization are computationally challenging, as they require radiative transfer across large cosmological volumes as well as sufficently high resolution to identify the sources of the ionizing radiation. The technological challenges for observations and the computational challenges for numerical simulations, will motivate intense work in this field over the coming decade.

Abraham Loeb

2006-03-14T23:59:59.000Z

105

Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Lighting Lighting When you're shopping for lightbulbs, compare lumens and use the Lighting Facts label to be sure you're getting the amount of light, or level of brightness, you want. You can save money and energy while lighting your home and still maintaining good light quantity and quality. Consider energy-efficient lighting options to use the same amount of light for less money. Learn strategies for comparing and buying lighting products and using them efficiently. Featured Lighting Choices to Save You Money Light your home for less money while using the same amount of light. How Energy-Efficient Light Bulbs Compare with Traditional Incandescents Energy-efficient light bulbs are available today and could save you about $50 per year in energy costs when you replace 15 traditional incandescent bulbs in your home.

106

Architectural Lighting Analysis in Virtual Lighting Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Architectural Lighting Analysis in Virtual Lighting Laboratory Architectural Lighting Analysis in Virtual Lighting Laboratory Speaker(s): Mehlika Inanici Date: July 7, 2003 - 12:00pm Location: Bldg. 90 Seminar Host/Point of Contact: Satkartar K. Kinney Virtual Lighting Laboratory is a Radiance-based lighting analysis tool and methodology that proposes transformations in the utilization of computer visualization in lighting analysis and design decision-making. It is a computer environment, where the user has been provided with matrices of illuminance and luminance values extracted from high dynamic range images. The principal idea is to provide the laboratory to the designer and researcher to explore various lighting analysis techniques instead of imposing limited number of predetermined metrics. In addition, it introduces an analysis approach for temporal and spatial lighting

107

New Light Sources for Tomorrow's Lighting Designs  

E-Print Network (OSTI)

The lighting industry is driven to provide light sources and lighting systems that, when properly applied, will produce a suitable luminous environment in which to perform a specified task. Tasks may include everything from office work, manufacturing and inspection to viewing priceless art objects, selecting the right chair for your living room, and deciding which produce item to select for tonight's dinner. While energy efficiency is a major consideration in any new lighting system design, the sacrifice of lighting quality may cost more in terms of lost productivity and user dissatisfaction than can ever be saved on that monthly energy bill. During the past several years, many new light sources have been developed and introduced. These product introductions have not been limited to anyone lamp type, but instead may be found in filament, fluorescent and high intensity discharge lamp families. Manufacturers of light sources have two basic goals for new product development. These goals are high efficiency lighting and improved color rendering properties. High efficiency lighting may take the form of either increasing lamp efficiency (lumens of light delivered per watt of power consumed) or decreasing lamp size, thus making a more easily controlled light source that places light where it is needed. The manufacturer's second goal is to produce lamps that render colors accurately while maintaining high efficiency. This paper will discuss new introductions in light sources and lighting systems and how they may impact the design of luminous environments of the future.

Krailo, D. A.

1986-06-01T23:59:59.000Z

108

The light cone at infinity  

E-Print Network (OSTI)

A recent refinement of Penrose's conformal framework for asymptotically flat space-times is summarized. The key idea concerns advanced and retarded conformal factors, which allow a rigid description of infinity as a locally metric light cone. In the new framework, the Bondi-Sachs energy-flux integrals of ingoing and outgoing gravitational radiation decay at spatial infinity such that the total radiated energy is finite, and the Bondi-Sachs energy-momentum has a unique limit at spatial infinity, coinciding with the uniquely rendered ADM energy-momentum.

Sean A. Hayward

2003-12-30T23:59:59.000Z

109

ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect

The purpose of this revision of the System Description Document (SDD) is to establish requirements that drive the design of the electrical power system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience are design engineers. This type of SDD leads and follows the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. This SDD follows the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to this system are obtained from ''Project Functional and Operational Requirements'' (F&OR) (Siddoway, 2003). Other requirements to support the design process have been taken from higher level requirements documents such as ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), the fire hazards analyses, and the preclosure safety analysis. The above mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canori and Leitner 2003) requirements. This SDD includes several appendices with supporting information. Appendix B lists key system charts, diagrams, drawings, and lists; and Appendix C is a list of system procedures.

M. Maniyar

2004-06-22T23:59:59.000Z

110

ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect

The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

S. Roy

2004-06-24T23:59:59.000Z

111

SNF AGING SYSTEM DESCRIPTION DOCUMENT  

Science Conference Proceedings (OSTI)

The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts, diagrams, drawings, lists and additional supporting information; and Appendix C is a list of procedures that will be used to operate the system.

L.L. Swanson

2005-04-06T23:59:59.000Z

112

Content of System Design Descriptions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-STD-3024-2011 August 2011 ________________________ Superseding DOE-STD-3024-98 DOE STANDARD CONTENT OF SYSTEM DESIGN DESCRIPTIONS U.S. Department of Energy AREA EDCO Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE DOE-STD-3024-2011 ii Available on the Department of Energy Technical Standards web page at http://www.hss.energy.gov/nuclearsafety/ns/techstds/ DOE-STD-3024-2011 iii CONTENTS PAGE Foreword ..................................................................................................................................................... iv 1. PURPOSE ............................................................................................................................................1

113

Descriptive Model of Generic WAMS  

Science Conference Proceedings (OSTI)

The Department of Energy’s (DOE) Transmission Reliability Program is supporting the research, deployment, and demonstration of various wide area measurement system (WAMS) technologies to enhance the reliability of the Nation’s electrical power grid. Pacific Northwest National Laboratory (PNNL) was tasked by the DOE National SCADA Test Bed Program to conduct a study of WAMS security. This report represents achievement of the milestone to develop a generic WAMS model description that will provide a basis for the security analysis planned in the next phase of this study.

Hauer, John F.; DeSteese, John G.

2007-06-01T23:59:59.000Z

114

Lighting Options for Homes.  

SciTech Connect

This report covers many aspects of various lighting options for homes. Types of light sources described include natural light, artificial light, incandescent lamps, fluorescent lamps, and high intensity discharge lamps. A light source selection guide gives the physical characteristics of these, design considerations, and common applications. Color, strategies for efficient lighting, and types of lighting are discussed. There is one section giving tips for various situations in specific rooms. Rooms and types of fixtures are shown on a matrix with watts saved by using the recommended type lighting for that room and room location. A major emphasis of this report is saving energy by utilizing the most suitable, recommended lighting option. (BN)

Baker, W.S.

1991-04-01T23:59:59.000Z

115

Mobile lighting apparatus  

DOE Patents (OSTI)

A mobile lighting apparatus includes a portable frame such as a moveable trailer or skid having a light tower thereon. The light tower is moveable from a stowed position to a deployed position. A hydrogen-powered fuel cell is located on the portable frame to provide electrical power to an array of the energy efficient lights located on the light tower.

Roe, George Michael; Klebanoff, Leonard Elliott; Rea, Gerald W; Drake, Robert A; Johnson, Terry A; Wingert, Steven John; Damberger, Thomas A; Skradski, Thomas J; Radley, Christopher James; Oros, James M; Schuttinger, Paul G; Grupp, David J; Prey, Stephen Carl

2013-05-14T23:59:59.000Z

116

Energy Star Lighting Verification Program  

SciTech Connect

The Program for the Evaluation and Analysis of Residential Lighting (PEARL) is a watchdog program. It was created in response to complaints received by utility program managers about the performance of certain Energy Star lighting products being promoted within their service territories and the lack of a self-policing mechanism within the lighting industry that would ensure the reliability of these products and their compliance with ENERGY STAR specifications. To remedy these problems, PEARL purchases and tests products that are available to the consumers in the marketplace. The Lighting Research Center (LRC) tests the selected products against the corresponding Energy Star specifications. This report includes the experimental procedure and results of Cycle Seven of PEARL program during the period of April 2006 to September 2006, along with the description of apparatus used, equipment calibration process, experimental methodology, and research findings from the testing. LRC continued receiving the CFL samples purchased by sponsors and finished performing the sphere testing for all CFL models at 100 hours of life. After that LRC aged the CFL samples to 1000 hours of life, and then performed sphere testing for all CFL models at 1000 hours of life. Then the CFLs were placed on the test rack to be aged to 40% of their rated life. Rapid Cycle Stress Test was also performed for all models using different sets of CFL samples.

Conan O'Rourke; Yutao Zhou

2006-09-30T23:59:59.000Z

117

Energy Star Lighting Verification Program  

SciTech Connect

The Program for the Evaluation and Analysis of Residential Lighting (PEARL) is a watchdog program. It was created in response to complaints received by utility program managers about the performance of certain Energy Star lighting products being promoted within their service territories and the lack of a self-policing mechanism within the lighting industry that would ensure the reliability of these products and their compliance with ENERGY STAR specifications. To remedy these problems, PEARL purchases and tests products that are available to the consumers in the marketplace. The Lighting Research Center (LRC) tests the selected products against the corresponding Energy Star specifications. This report includes the experimental procedure and results of Cycle Seven and Cycle Eight of PEARL program during the period of October 2006 to March 2007, along with the description of apparatus used, equipment calibration process, experimental methodology, and research findings from the testing. LRC finished performing the sphere testing for all CFL models in Cycle Seven at 40% of their rated life. LRC also performed re-test of Rapid Cycle Stress Test, under the request of DOE, for five CFL models that failed the Rapid Cycle Stress Test in Cycle Seven. From January 2007 to March 2007, LRC coordinated the procuring efforts for the CFL models that were selected for Cycle Eight.

Conan O'Rourke; Yutao Zhou

2007-03-31T23:59:59.000Z

118

Number: 1 Description: What powers did ...  

Science Conference Proceedings (OSTI)

... top> Number: 10 Description: What is one of the major problems with electronic producing turbines (windmills) in California? ...

2002-11-04T23:59:59.000Z

119

Number: 1 Description: How did the ...  

Science Conference Proceedings (OSTI)

... Number: 80 Description: What part did ITT (International Telephone and Telegraph) and Anaconda Copper play in the ...

2003-03-03T23:59:59.000Z

120

Site Acquisition Description/ Category Contracting Office Solicitation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Description Category Contracting Office Solicitation Method Contract Type Estimated Dollar Range Pre-Solicitation Conference Industry Meetings Draft- Solicitation Synopsis...

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Expressive fuzzy description logics over lattices  

Science Conference Proceedings (OSTI)

It is generally accepted that the management of imprecision and vagueness will yield more intelligent and realistic knowledge-based applications. In this paper we present a fuzzy description logics framework based on certainty lattices. Our main feature ... Keywords: Certainty lattices, Description logics, Fuzzy description logics, Inverse roles, Role hierarchies, Transitive roles

Yuncheng Jiang; Yong Tang; Ju Wang; Peimin Deng; Suqin Tang

2010-03-01T23:59:59.000Z

122

Estimated Cost Description Determination Date:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Title, Location Title, Location Estimated Cost Description Determination Date: 2010 LCLS Undulator 2 is envisioned to be a 0.2 - 2keV FEL x-ray source, capable of delivering x-rays to End Station A (ESA), located in the existing Research Yard at SLAC. It will also be configurable as a non- FEL hard x-ray source capable of delivering a chirped x-ray pulse for single-shot broad-spectrum measurements. The project would entail reconstruction of the electron beam transport to End Station A, construction and installation of a new undulator in the tunnel upstream of ESA and beam dump, and construction and installation of x-ray transport, optics, and diagnostics in ESA. It also includes the construction of an annex to End Station A , providing hutches for experiment stations.

123

Estimated Cost Description Determination Date:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and posted 2/10/2011 and posted 2/10/2011 *Title, Location Estimated Cost Description Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain $50,000 FONSI: uncertain Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain FONSI: uncertain Total Estimated Cost $70,000 Attachment: Memo, Moody to Marcinowski, III, SUBJECT: NEPA 2011 APS for DOE-SRS, Dated: Annual NEPA Planning Summary Environmental Assessments (EAs) Expected to be Initiated in the Next 12 Months Department of Energy (DOE) Savannah River Site (SRS) Jan-11 Estimated Schedule (**NEPA Milestones) South Carolina Department of Health and Environmental Control (SCDHEC) issued a National Pollutant Discharge Elimination System (NPDES) Industrial Stormwater General Permit (IGP) # SCR000000 November 12, with an effective date of January

124

Geometry-dependent lighting  

E-Print Network (OSTI)

Abstract — In this paper we introduce geometrydependent lighting that allows lighting parameters to be defined independently and possibly discrepantly over an object or scene based on the local geometry. We present and discuss Light Collages, a lighting design system with geometry-dependent lights for effective feature-enhanced visualization. Our algorithm segments the objects into local surface patches and places lights that are locally consistent but globally discrepant to enhance the perception of shape. We use spherical harmonics for efficiently storing and computing light placement and assignment. We also outline a method to find the minimal number of light sources sufficient to illuminate an object well with our globally discrepant lighting approach. Index Terms — Lighting design, scientific illustration, discrepant lighting, light placement, silhouette enhancement, proximity shadows, spherical harmonics I.

Chang Ha Lee; Xuejun Hao; Amitabh Varshney

2005-01-01T23:59:59.000Z

125

Lighting Group: What's New  

NLE Websites -- All DOE Office Websites (Extended Search)

What's New What's New in the Lighting Group For more information on what's new in the Lighting Group, please contact: Francis Rubinstein Lighting Group Leader (510) 486-4096...

126

Light in the city  

E-Print Network (OSTI)

This thesis focuses on enhancing the awareness of light for the pedestrian,and using light as a way of revealing the structure of the city and its relation to the cosmos. It proposes that aesthetic qualities of light inform ...

Srinivasan, Kavita, 1976-

2002-01-01T23:59:59.000Z

127

Specific light in sculpture  

E-Print Network (OSTI)

Specific light is defined as light from artificial or altered natural sources. The use and manipulation of light in three dimensional sculptural work is discussed in an historic and contemporary context. The author's work ...

Powell, John William

1989-01-01T23:59:59.000Z

128

Energy_Savings_Light_Emitting_Diodes_Niche_Lighting_Apps.pdf...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EnergySavingsLightEmittingDiodesNicheLightingApps.pdf EnergySavingsLightEmittingDiodesNicheLightingApps.pdf EnergySavingsLightEmittingDiodesNicheLightingApps.p...

129

Prospects for LED lighting.  

SciTech Connect

Solid-state lighting using light-emitting diodes (LEDs) has the potential to reduce energy consumption for lighting by 50% while revolutionizing the way we illuminate our homes, work places, and public spaces. Nevertheless, substantial technical challenges remain in order for solid-state lighting to significantly displace the well-developed conventional lighting technologies. We review the potential of LED solid-state lighting to meet the long-term cost goals.

Tsao, Jeffrey Yeenien; Gee, James Martin; Simmons, Jerry Alvon

2003-08-01T23:59:59.000Z

130

Lighting Control Systems  

Science Conference Proceedings (OSTI)

The demand for lighting control systems in residential, commercial, and industrial facilities is on the rise with the demand for increased energy savings. With lighting accounting for almost 23% of grid load, there is significant opportunity to reduce lighting load while improving the quality of light for customers. Lighting control systems are becoming more intelligent as the need for them to interface with building control systems and demand response systems also increases. Lighting control systems use...

2009-12-17T23:59:59.000Z

131

Composite Lighting Simulations with Lighting Networks  

E-Print Network (OSTI)

A whole variety of different techniques for simulating global illumination in virtual environments have been developed over recent years. Each technique, including Radiosity, Monte-Carlo ray- or photon tracing, and directional-dependent Radiance computations, is best suited for simulating only some special case environments. None of these techniques is currently able to efficiently simulate all important lighting effects in non-trivial scenes. In this paper, we describe a new approach for efficiently combining different global illumination algorithms to yield a composite lighting simulation: Lighting Networks. Lighting Networks can exploit the advantages of each algorithm and can combine them in such a way as to simulate lighting effects that could only be computed at great costs by any single algorithm. Furthermore, this approach allows a user to configure the Lighting Network to compute only specific lighting effects that are important for a given task, while avoiding a costly simulation of the full global illumination in a scene. We show how the light paths computed by a Lighting Network can be described using regular expressions. This mapping allows us to analyze the composite lighting simulation and ensure completeness and redundant-free computations. Several examples demonstrate the advantages and unique lighting effects that can be obtained using this technique. 1

Philipp Slusallek; Marc Stamminger; Wolfgang Heidrich; Jan-Christian Popp; Hans-peter Seidel

1998-01-01T23:59:59.000Z

132

Lighting Group: Links  

NLE Websites -- All DOE Office Websites (Extended Search)

Links Links Links Organizations Illuminating Engineering Society of North America (IESNA) International Commission on Illumination (CIE) International Association of Lighting Designers (IALD) International Association of Energy-Efficient Lighting Lightfair International Energy Agency - Task 21: Daylight in Buildings: Design Tools and Performance Analysis International Energy Agency - Task 31: Daylighting Buildings in 21st Century National Association on Qualifications for the Lighting Professions (NCQLP) National Association of Independent Lighting Distributors (NAILD) International Association of Lighting Management Companies (NALMCO) Research Centers California Lighting Technology Center Lighting Research Center Lighting Research at Canada Institute for Research in Construction

133

Advanced Demand Responsive Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Demand Demand Responsive Lighting Host: Francis Rubinstein Demand Response Research Center Technical Advisory Group Meeting August 31, 2007 10:30 AM - Noon Meeting Agenda * Introductions (10 minutes) * Main Presentation (~ 1 hour) * Questions, comments from panel (15 minutes) Project History * Lighting Scoping Study (completed January 2007) - Identified potential for energy and demand savings using demand responsive lighting systems - Importance of dimming - New wireless controls technologies * Advanced Demand Responsive Lighting (commenced March 2007) Objectives * Provide up-to-date information on the reliability, predictability of dimmable lighting as a demand resource under realistic operating load conditions * Identify potential negative impacts of DR lighting on lighting quality Potential of Demand Responsive Lighting Control

134

Plant and Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

publicationshouseplantligh t.html Sincerely, Anthony R. Brach "Artificial" light comes from many kinds of bulbs that emit different wavelengths of light; Many plants...

135

National Synchrotron Light Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Angle Limit," Phys. Rev. Lett., 99: 134801 (2007). 33 Researchers Produce Firsts with Bursts of Light BNL researchers have generated extremely short pulses of light that are the...

136

Light Metals 2010  

Science Conference Proceedings (OSTI)

Feb 1, 2010 ... Softcover book: Light Metals 2008 Volume 2: Aluminum Reduction. Hardcover book and CD-ROM: Light Metals 2009 ...

137

Lighting Systems Test Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Measurement equipment with light beam Lighting Systems Test Facilities NOTICE Due to the current lapse of federal funding, Berkeley Lab websites are accessible, but may not be...

138

Lighting and Daylighting  

Energy.gov (U.S. Department of Energy (DOE))

Buildings can be lit in two ways: by using artificial lighting, or by using daylighting, or the process of using natural sunlight, windows, and skylights to provide lighting.

139

Light Laboratory, Inc.  

Science Conference Proceedings (OSTI)

... 12) Solid State Lighting Luminaires - Color Characteristic Measurements. [22/S04] IES LM-16:1993 Practical Guide to Colorimetry of Light Sources. ...

2013-07-26T23:59:59.000Z

140

Hubbell Lighting Photometric Laboratory  

Science Conference Proceedings (OSTI)

... 12) Solid State Lighting Luminaires - Color Characteristic Measurements. [22/S04] IES LM-16:1993 Practical Guide to Colorimetry of Light Sources. ...

2013-07-26T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Energy Efficient Lighting Products  

Science Conference Proceedings (OSTI)

... Road Vista, San Diego, CA [200823- 0] Light Laboratory, Inc ... GA. CSA Group, Alpharetta, GA [200732- 0] Cooper Lighting Photometric Laboratory ...

2013-07-26T23:59:59.000Z

142

Looking For Light.  

E-Print Network (OSTI)

??In my search for the way light can dictate the overall expression of an image, I have found that light is the means that activates… (more)

Lindholm, Kevin R.

2010-01-01T23:59:59.000Z

143

LBNL Lighting Research Group  

NLE Websites -- All DOE Office Websites (Extended Search)

LED and ballast berkeley lamp workstation light switch Overview | What's New | Publications | Software | Facilities | People | Contact Us | Links Sources and Ballasts | Light...

144

Properties of Light  

Science Conference Proceedings (OSTI)

... Scattering of Light. Exploration: Sunset in a glass. ... How would you design a camera that could see through a sand storm? Invisible Light. ...

2012-03-23T23:59:59.000Z

145

Lighting and Daylighting Basics  

Energy.gov (U.S. Department of Energy (DOE))

Buildings can be lit in two ways: by using artificial lighting, or by using daylighting, or the process of using natural sunlight, windows, and skylights to provide lighting.

146

Cree LED Lighting Solutions Formerly LED Lighting Fixtures LLF...  

Open Energy Info (EERE)

Cree LED Lighting Solutions Formerly LED Lighting Fixtures LLF Jump to: navigation, search Name Cree LED Lighting Solutions (Formerly LED Lighting Fixtures (LLF)) Place...

147

Incandescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Incandescent Lighting Incandescent Lighting August 16, 2013 - 10:00am Addthis Incandescent lighting is the most common type of lighting used in homes. Incandescent lamps operate...

148

Solid-State Lighting: Registration  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting: Registration on Twitter Bookmark Solid-State Lighting: Registration on Google Bookmark Solid-State Lighting: Registration on Delicious Rank Solid-State Lighting:...

149

Solid-State Lighting: Postings  

NLE Websites -- All DOE Office Websites (Extended Search)

Solid-State Lighting: Postings on Twitter Bookmark Solid-State Lighting: Postings on Google Bookmark Solid-State Lighting: Postings on Delicious Rank Solid-State Lighting:...

150

CEL-1 lighting computer program - programmer's guide. Final report Jan 80-Sep 82  

SciTech Connect

The basic algorithms and program file structure of the CEL-1 (Conversion of Electric Lighting, Version 1.0) lighting computer program are documented. The CEL-1 computer program aids the illumination in designing energy efficient interior lighting systems. Lighting metrics which may be calculated include illuminance, equivalent sphere illumination, and visual comfort probability. Energy profiles resulting from lighting controls which respond to daylight can be evaluated using CEL-1. This programmer's guide is divided into seven sections: (1) Programs Structures; (2) Basic Techniques; (3) Main Program Descriptions; (4) Subprogram Descriptions; (5) Logical Unit Assignments; (6) Compiling the Programs; and (7) Source and Auxiliary Files.

Brackett, W.E.

1983-01-01T23:59:59.000Z

151

Lighting Research Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting Research Group overview what's new publications software facilities people contact us links...

152

Energy and lighting decisions  

SciTech Connect

This report reviews the fundamental principles of lighting and uses them to evaluate energy-conserving lighting equipment and techniques. The selection of the proper lighting components and systems is complex, requiring a knowledge of the characteristics of light sources and their interactions with the auxiliary equipment and the environment. Furthermore, there are subjective aspects of lighting that are difficult to quantify. We address the simplistic way in which lighting is commonly approached, then present an argument as to the critical nature of the lighting decision. In the final sections we discuss and evaluate lighting equipment in terms of its applications and characteristics. Familiarity with the fundamental characteristics of the elements of lighting equipment will also permit more judicious appraisal and use of lighting concepts that may be introduced in the future. 6 figs., 9 tabs.

Verderber, R.R.

1986-06-01T23:59:59.000Z

153

Lighting Inventory Lighting Theatre and Drama  

E-Print Network (OSTI)

Strand Basic Palette 400 channel 800 attrib. 1 Strand Lighting 200 Series 24/48 1 1 MicroVision 2 HORIZON

Indiana University

154

Lighting Retrofit Study  

SciTech Connect

The Lighting Retrofit Study was an effort to determine the most cost-effective methods of retrofitting several configurations of lighting systems at Lawrence Berkeley Laboratory (LBL) and Lawrence Livermore National Laboratory (LLNL). We developed a test protocol to compare a variety of lighting technologies for their applicability in labs and offices and designed and constructed a novel lighting contrast potential meter to allow for comparison of lighting quality as well as quantity.

Kromer, S.; Morse, O.; Siminovitch, M.

1991-09-01T23:59:59.000Z

155

Property:File/Description | Open Energy Information  

Open Energy Info (EERE)

Description Description Jump to: navigation, search Property Name File/Description Property Type Text Description Description of the file's contents/purpose. Pages using the property "File/Description" Showing 25 pages using this property. (previous 25) (next 25) A Australia-Solar-Map.png + Average Daily Solar Exposure: Australia B BOEMRE OCS.oil.gas.2007-12.map.pdf + Outer Continental Shelf (OCS) Oil & Gas Leasing Program 2007 - 2012 BOEMRE US.CSB.Map.pdf + US Continental Shelf Boundary (CSB) Areas BOEMRE US.CSB.bathy.map.pdf + Outer Continental Shelf (OCS) Boundary Areas, in color BOEMRE atlantic.OCS.multiple.use.map.2003.pdf + Multiple Uses of the Atlantic Outer Continental Shelf BOEMRE lease.platforms.santa.barb.map.5.2010.pdf + Federal Leases in Pacific Ocean, near Santa Maria Basin

156

Business Case Slide 12: High-Volume: Casks - Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Casks - Description Previous Slide Next Slide Table of Contents High-Volume: Casks - Description Description Use DUO2 to enhance the shielding efficiency in spent fuel casks for...

157

Microsoft Word - 564M_Biomass_Project Descriptions FINAL 120409...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

564MBiomassProject Descriptions FINAL 120409 Microsoft Word - 564MBiomassProject Descriptions FINAL 120409 Microsoft Word - 564MBiomassProject Descriptions FINAL 120409 More...

158

Property:WellFieldDescription | Open Energy Information  

Open Energy Info (EERE)

Jump to: navigation, search Property Name WellFieldDescription Property Type String Description A description of the well field in the geothermal area This is a property...

159

Property:Wavemaking Description | Open Energy Information  

Open Energy Info (EERE)

Description Description Jump to: navigation, search Property Name Wavemaking Description Property Type Text Pages using the property "Wavemaking Description" Showing 25 pages using this property. (previous 25) (next 25) A Alden Large Flume + Wave generators not yet designed Alden Small Flume + Period adjustable electronically, height adjustable mechanically Alden Wave Basin + Period adjustable electronically, height adjustable mechanically C Carderock Maneuvering & Seakeeping Basin + Irregular waves with a spectrum resembling typical ocean wave patterns with appropriate scale reductions. Carderock Tow Tank 2 + Irregular waves with a spectrum resembling typical ocean wave patterns with appropriate scale reductions Carderock Tow Tank 3 + Irregular waves with a spectrum resembling typical ocean wave patterns with appropriate scale reductions.

160

Machinist Pipeline/Apprentice Program Program Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Machinist PipelineApprentice Program Program Description The Machinist Pipeline Program was created by the Prototype Fabrication Division to fill a critical need for skilled...

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

POSTER DESCRIPTION: Poster Title: "Distributed Electric Power...  

NLE Websites -- All DOE Office Websites (Extended Search)

DESCRIPTION: Poster Title: "Distributed Electric Power from Bio-based and Fossil Fuels" Entity: Technology Management, Inc. 9718 Lake Shore Blvd., Cleveland, Ohio 44108 Author(s):...

162

EK101 Engineering Light Smart Lighting  

E-Print Network (OSTI)

represents high usage of an engine and the violet end represents low usage. A light blue coloring represents from red to light blue), and slowly increase their usage of engine A. The seventh row show a patternModeling Long-Term Search Engine Usage Ryen W. White, Ashish Kapoor, and Susan T. Dumais Microsoft

Bifano, Thomas

163

Data:4635775f-c11b-47cc-bfca-f1968fafbd62 | Open Energy Information  

Open Energy Info (EERE)

75f-c11b-47cc-bfca-f1968fafbd62 75f-c11b-47cc-bfca-f1968fafbd62 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: South Central Indiana REMC Effective date: 2010/06/01 End date if known: Rate name: Security Lights 200-Watt High-Pressure Sodium Vapor Sector: Lighting Description: Availability Available to any consumer of the Corporation providing 120-volt service exists ahead of the meter loop that can be contacted for the purpose of installing dusk-to-dawn security lighting. Mercury vapor dusk-to-dawn security lighting available only to consumers with already existing mercury vapor lighting service. Type of Service Dusk-to-dawn lighting service using photoelectric controlled equipment, including any and all equipment necessary to make the complete installation on a consumer's meter pole or service drop lift pole, shall be considered to be a part of this rate. Any installation requiring additional material to serve dusk-to-dawn security lighting beyond the point of power contact which requires additional poles and wire will be billed to the consumer.

164

Data:Cc61e653-2976-4b1f-89c2-a5a13db662d8 | Open Energy Information  

Open Energy Info (EERE)

1e653-2976-4b1f-89c2-a5a13db662d8 1e653-2976-4b1f-89c2-a5a13db662d8 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: South Central Indiana REMC Effective date: 2010/06/01 End date if known: Rate name: Security Lights 100-Watt High-Pressure Sodium Vapor Sector: Lighting Description: Availability Available to any consumer of the Corporation providing 120-volt service exists ahead of the meter loop that can be contacted for the purpose of installing dusk-to-dawn security lighting. Mercury vapor dusk-to-dawn security lighting available only to consumers with already existing mercury vapor lighting service. Type of Service Dusk-to-dawn lighting service using photoelectric controlled equipment, including any and all equipment necessary to make the complete installation on a consumer's meter pole or service drop lift pole, shall be considered to be a part of this rate. Any installation requiring additional material to serve dusk-to-dawn security lighting beyond the point of power contact which requires additional poles and wire will be billed to the consumer.

165

Data:5f3bf96c-44ac-4872-b77f-759dc94c0397 | Open Energy Information  

Open Energy Info (EERE)

bf96c-44ac-4872-b77f-759dc94c0397 bf96c-44ac-4872-b77f-759dc94c0397 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: South Central Indiana REMC Effective date: 2010/06/01 End date if known: Rate name: Security Lights 175-Watt Mercury Vapor Sector: Lighting Description: Availability Available to any consumer of the Corporation providing 120-volt service exists ahead of the meter loop that can be contacted for the purpose of installing dusk-to-dawn security lighting. Mercury vapor dusk-to-dawn security lighting available only to consumers with already existing mercury vapor lighting service. Type of Service Dusk-to-dawn lighting service using photoelectric controlled equipment, including any and all equipment necessary to make the complete installation on a consumer's meter pole or service drop lift pole, shall be considered to be a part of this rate. Any installation requiring additional material to serve dusk-to-dawn security lighting beyond the point of power contact which requires additional poles and wire will be billed to the consumer.

166

Data:084451c2-f105-4ede-b563-f57051d0d939 | Open Energy Information  

Open Energy Info (EERE)

51c2-f105-4ede-b563-f57051d0d939 51c2-f105-4ede-b563-f57051d0d939 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: South Central Indiana REMC Effective date: 2010/06/01 End date if known: Rate name: Security Lights 400-Watt mercury Vapor Sector: Lighting Description: Availability Available to any consumer of the Corporation providing 120-volt service exists ahead of the meter loop that can be contacted for the purpose of installing dusk-to-dawn security lighting. Mercury vapor dusk-to-dawn security lighting available only to consumers with already existing mercury vapor lighting service. Type of Service Dusk-to-dawn lighting service using photoelectric controlled equipment, including any and all equipment necessary to make the complete installation on a consumer's meter pole or service drop lift pole, shall be considered to be a part of this rate. Any installation requiring additional material to serve dusk-to-dawn security lighting beyond the point of power contact which requires additional poles and wire will be billed to the consumer.

167

Spectrally Enhanced Lighting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 2007 November 2007 AfterImage + s p a c e 1 Spectrally Enhanced Lighting Spectrally Enhanced Lighting Brian Liebel, PE, LC Brian Liebel, PE, LC November 29, 2007 November 29, 2007 Federal Utilities Partnership Working Group Federal Utilities Partnership Working Group November 29, 2007 November 29, 2007 29 November 2007 AfterImage + s p a c e 2 Spectrally Enhanced Lighting Spectrally Enhanced Lighting Spectrally Enhanced Lighting Spectrally Enhanced Lighting This is not a technology; just a This is not a technology; just a different way to quantify light based on different way to quantify light based on well established scientific findings well established scientific findings Can be used in conjunction with ANY Can be used in conjunction with ANY type of lighting design to gain

168

Emplacement Drift System Description Document  

SciTech Connect

The Emplacement Drift System is part of the Engineered Barrier System and provides the interface between the various waste package (WP) systems and the Ground Control System. In conjunction with the various WPs, the Emplacement Drift System limits the release and transport of radionuclides from the WP to the Natural Barrier following waste emplacement. Collectively, the Emplacement Drift System consists of the structural support hardware (emplacement drift invert and WP emplacement pallet) and any performance-enhancing barriers (drip shields and invert ballast) installed or placed in the emplacement drifts. The Emplacement Drift System is entirely located within the emplacement drifts in the subsurface portion of the Monitored Geologic Repository (MGR); specifically, it is physically bounded by the Subsurface Facility System, the Ground Support System, and the Natural Barrier. The Emplacement Drift System supports the key MGR functions of limiting radionuclide release to the Natural Barrier, minimizing the likelihood of a criticality external to the WPs, limiting natural and induced environmental effects, and providing WP support. The Emplacement Drift System limits radionuclide release to the Natural Barrier by controlling the movement of radionuclides within the emplacement drift and to the Natural Barrier, and by limiting water contact with the WPs. The Emplacement Drift System provides physical support and barriers for emplaced WPs that reduce water contact. The Emplacement Drift WP spacing supports the thermal loading performance by complimenting drift layout and orientation as described in the system description document for the Subsurface Facility System. The Emplacement Drift System supports the WP and also provides an environment that aids in enhancing WP confinement performance. As part of the Engineered Barrier System, the Emplacement Drift System interfaces with the WP systems. The Emplacement Drift System also interfaces with the Natural Barrier, Subsurface Facility System, and Ground Control System for the space and location of emplaced WPs, for the controlled release of radionuclides, and for controlling the heat, chemical, and physical effects that interact between these systems. The Emplacement Drift System interfaces with the Subsurface Ventilation System for preclosure heat removal from WPs. The Emplacement Drift System interfaces with the Waste Emplacement/Retrieval System and the Performance Confirmation Emplacement Drift Monitoring System for equipment clearance for the emplacement, retrieval, and monitoring of waste.

Eric Loros

2001-07-31T23:59:59.000Z

169

National Synchrotron Light Source  

NLE Websites -- All DOE Office Websites (Extended Search)

to the QCC Forms Description Number File Format Assessment Tracking System (ATS): NSLS Family ATS Entry Request Form QF-053 Word Controlled DocumentsProcedure: Distribution...

170

LED Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LED Lighting LED Lighting August 16, 2013 - 10:07am Addthis Light-emitting diodes (LEDs) are light sources that differ from more traditional sources of light in that they are...

171

Extending soft sets with description logics  

Science Conference Proceedings (OSTI)

Molodtsov initiated the concept of soft set theory, which can be used as a generic mathematical tool for dealing with uncertainty. Description Logics (DLs) are a family of knowledge representation languages which can be used to represent the terminological ... Keywords: Description logics, Extended soft sets, Soft sets, Terminology

Yuncheng Jiang; Yong Tang; Qimai Chen; Ju Wang; Suqin Tang

2010-03-01T23:59:59.000Z

172

Natural lighting and skylights  

E-Print Network (OSTI)

There are many physiological and psychological factors which enter into the proper design of space for human occupancy. One of these elements is light. Both natural light and manufactured light are basic tools with which any designer must work. However, they are only two of the many, many elements which must be considered; and they, therefore, must be considered, always, in relation to the other elements. The achievement of good lighting depends on a reasonable understanding of three primary factors: one, the visual response to lighting; two, the availability and types of lighting; and three, methods for controlling light. This thesis is intended to supply enough information to provide a working knowledge of each of these facets. The human visual response is discussed in "Goals For Good Lighting." The availability and types of lighting are dealt with in the section on available light. The remainder of the thesis concerns methods for controlling light. The use of scale models for studying the natural lighting characteristics of buildings due to the building geometry, the fenestration details and the interior reflectance has been well established as pointed out in the earlier part of this thesis. With the completion of the work outlined herein, the feasibility of using scale models for studying skylights is also an established fact. The method of analysis by models can be a valuable tool to any designer who is concerned about day-lighting.

Evans, Benjamin Hampton

1961-01-01T23:59:59.000Z

173

Lighting Group: Overview  

NLE Websites -- All DOE Office Websites (Extended Search)

Overview Overview Overview of the Lighting Research Group The Lighting Research Group at Lawrence Berkeley National Laboratory performs research aimed at improving the energy efficiency of lighting systems in buildings and homes, throughout the State of California and across the Nation. The goal is to reduce lighting energy consumption by 50% over twenty years by improving the efficiency of light sources, and controlling and delivering illumination so that it is available, where and when needed, and at the required intensity. Research in the Lighting Group falls into three main areas: Sources and Ballasts, Light Distribution Systems and Controls and Communications. Click on a link below for more information about each of these research areas. Sources and Ballasts investigates next generation light sources, such as

174

Inverse Lighting for Photography  

E-Print Network (OSTI)

We introduce a technique for improving photographs using inverse lighting, a new process based on algorithms developed in computer graphics for computing the reflection of light in 3D space. From a photograph and a 3D surface model for the object pictured, inverse lighting estimates the directional distribution of the incident light. We then use this information to process the photograph digitally to alter the lighting on the object. Inverse lighting is a specific example of the general idea of inverse rendering. This refers to the practice of using the methods of computer graphics, which normally are used to render images from scene information, to infer scene information from images. Our system uses physically based rendering technology to construct a linear least squares system that we solve to find the lighting. As an application, the results are then used to simulate a change in the incident light in the photograph. An implementation is described that uses 3D models from a laser...

Stephen R. Marschner; Donald P. Greenberg

1997-01-01T23:59:59.000Z

175

Fast Light, Fast Neutrinos?  

E-Print Network (OSTI)

Light has been observed with group velocities both faster and slower than the speed of light. The recent report from OPERA of superluminal 17 GeV neutrinos may describe a similar phenomenon.

Cahill, Kevin

2011-01-01T23:59:59.000Z

176

Madrid Electric Lighting Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Electric Lighting Quality Page 1 of 2 ELECTRIC LIGHTING QUALITY MAGIC BOX is a versatile home. Its design allows to change the room size by opening and closing the movable walls...

177

Automatic lighting controls demonstration  

SciTech Connect

The purpose of this work was to demonstrate, in a real building situation, the energy and peak demand reduction capabilities of an electronically ballasted lighting control system that can utilize all types of control strategies to efficiently manage lighting. The project has demonstrated that a state-of-the-art electronically ballasted dimmable lighting system can reduce energy and lighting demand by as least 50% using various combinations of control strategies. By reducing light levels over circulation areas (tuning) and reducing after hours light levels to accommodate the less stringent lighting demands of the cleaning crew (scheduling), lighting energy consumption on weekdays was reduced an average of 54% relative to the initial condition. 10 refs., 14 figs., 3 tabs.

Rubinstein, F.; Verderber, R.

1990-03-01T23:59:59.000Z

178

Lighting energy audit workbook  

SciTech Connect

A simple test to determine the need for a lighting energy audit is followed by how-to information on conducting the audit, identifying savings opportunities, and developing an energy management plan for lighting.

1984-01-01T23:59:59.000Z

179

Light Wavelength and Plants  

NLE Websites -- All DOE Office Websites (Extended Search)

Light Wavelength and Plants Name: John Location: NA Country: NA Date: NA Question: I just was wandering whether plants grow better in artificial light or in sunlight. I am...

180

Germinating and Light  

NLE Websites -- All DOE Office Websites (Extended Search)

Germinating and Light Name: Chris Location: NA Country: NA Date: NA Question: Can you tell me how plants determine where the light is once they are out of the soil and not a...

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

PFP Emergency Lighting Study  

SciTech Connect

NFPA 101, section 5-9 mandates that, where required by building classification, all designated emergency egress routes be provided with adequate emergency lighting in the event of a normal lighting outage. Emergency lighting is to be arranged so that egress routes are illuminated to an average of 1.0 footcandle with a minimum at any point of 0.1 footcandle, as measured at floor level. These levels are permitted to drop to 60% of their original value over the required 90 minute emergency lighting duration after a power outage. The Plutonium Finishing Plant (PFP) has two designations for battery powered egress lights ''Emergency Lights'' are those battery powered lights required by NFPA 101 to provide lighting along officially designated egress routes in those buildings meeting the correct occupancy requirements. Emergency Lights are maintained on a monthly basis by procedure ZSR-12N-001. ''Backup Lights'' are battery powered lights not required by NFPA, but installed in areas where additional light may be needed. The Backup Light locations were identified by PFP Safety and Engineering based on several factors. (1) General occupancy and type of work in the area. Areas occupied briefly during a shiftly surveillance do not require backup lighting while a room occupied fairly frequently or for significant lengths of time will need one or two Backup lights to provide general illumination of the egress points. (2) Complexity of the egress routes. Office spaces with a standard hallway/room configuration will not require Backup Lights while a large room with several subdivisions or irregularly placed rooms, doors, and equipment will require Backup Lights to make egress safer. (3) Reasonable balance between the safety benefits of additional lighting and the man-hours/exposure required for periodic light maintenance. In some plant areas such as building 236-Z, the additional maintenance time and risk of contamination do not warrant having Backup Lights installed in all rooms. Sufficient light for egress is provided by existing lights located in the hallways.

BUSCH, M.S.

2000-02-02T23:59:59.000Z

182

TMS Light Metals Publication  

Science Conference Proceedings (OSTI)

The following instructions should be used when submitting a manuscript for any TMS Light Metals proceedings volume. INTRODUCTION. Orientation to ...

183

Solid-State Lighting: Solid-State Lighting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Solid-State Lighting Search Solid-State Lighting Search Search Help Solid-State Lighting HOME ABOUT THE PROGRAM R&D PROJECTS MARKET-BASED PROGRAMS SSL BASICS INFORMATION RESOURCES FINANCIAL OPPORTUNITIES EERE » Building Technologies Office » Solid-State Lighting Printable Version Share this resource Send a link to Solid-State Lighting: Solid-State Lighting to someone by E-mail Share Solid-State Lighting: Solid-State Lighting on Facebook Tweet about Solid-State Lighting: Solid-State Lighting on Twitter Bookmark Solid-State Lighting: Solid-State Lighting on Google Bookmark Solid-State Lighting: Solid-State Lighting on Delicious Rank Solid-State Lighting: Solid-State Lighting on Digg Find More places to share Solid-State Lighting: Solid-State Lighting on AddThis.com... Pause/Resume Photo of a large room with people standing around poster boards.

184

Advanced Lighting Guidelines  

Science Conference Proceedings (OSTI)

Information about energy-effective lighting technologies is required to be updated as old technologies become obsolete and new technologies begin to make important market impacts. Providing a comprehensive, state-of-the-art update of lighting technology application and information is necessary to ensure that lighting decision-makers have the best possible information available at all times.

2001-10-22T23:59:59.000Z

185

Lighting management casebook  

SciTech Connect

Fifteen examples illustrate how lighting system projects can save energy as well as improve productivity and safety. The case histories include the use of programmable lighting, fiber optics, skylights, voltage reduction, ultrasonic and infrared sensors, and other strategies for improving lighting efficiency. Each case history includes the management approach, site information, and applications. (DCK)

1982-06-01T23:59:59.000Z

186

Energy and lighting design  

SciTech Connect

Energy conserving practices in providing lighting for today's buildings are examined in this second of a two-part presentation. Discussion on light source characteristics, ballast characteristics for gaseous discharge lamps, quality and the cost of lighting, and equivalent sphere illumination are included.

Helms, R.N.

1979-12-01T23:59:59.000Z

187

Resonant energy transfer in light harvesting and light emitting applications.  

E-Print Network (OSTI)

??The performance of light emitting and light harvesting devices is improved by utilising resonant energy transfer. In lighting applications, the emission energy of a semiconductor… (more)

Chanyawadee, Soontorn

2009-01-01T23:59:59.000Z

188

LIGHT FORCE: An Exploration of Light through Design.  

E-Print Network (OSTI)

??What falls into the realm of light and what it means to design and the human experience? Can light be material? How does light change… (more)

Chen, Tzu

2007-01-01T23:59:59.000Z

189

Solid-State Lighting: Webcast: Evaluating LED Street Lighting...  

NLE Websites -- All DOE Office Websites (Extended Search)

Webcast: Evaluating LED Street Lighting Solutions to someone by E-mail Share Solid-State Lighting: Webcast: Evaluating LED Street Lighting Solutions on Facebook Tweet about...

190

Lighting Group: Sources and Ballasts: LED Task Light  

NLE Websites -- All DOE Office Websites (Extended Search)

light The goal of this project is to accelerate the use of energy efficient light emitting diode (LED) technology for general lighting applications by developing a task lamp...

191

Solid-State Lighting: Solid-State Lighting Videos  

NLE Websites -- All DOE Office Websites (Extended Search)

Solid-State Lighting Videos to Solid-State Lighting Videos to someone by E-mail Share Solid-State Lighting: Solid-State Lighting Videos on Facebook Tweet about Solid-State Lighting: Solid-State Lighting Videos on Twitter Bookmark Solid-State Lighting: Solid-State Lighting Videos on Google Bookmark Solid-State Lighting: Solid-State Lighting Videos on Delicious Rank Solid-State Lighting: Solid-State Lighting Videos on Digg Find More places to share Solid-State Lighting: Solid-State Lighting Videos on AddThis.com... Conferences & Meetings Presentations Publications Webcasts Videos Tools Solid-State Lighting Videos On this page you can access DOE Solid-State Lighting (SSL) Program videos. Photo of a museum art gallery with LED lights in track fixtures overhead. The City of Los Angeles LED Streetlight Program

192

Solid-State Lighting: Solid-State Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting Lighting Printable Version Share this resource Send a link to Solid-State Lighting: Solid-State Lighting to someone by E-mail Share Solid-State Lighting: Solid-State Lighting on Facebook Tweet about Solid-State Lighting: Solid-State Lighting on Twitter Bookmark Solid-State Lighting: Solid-State Lighting on Google Bookmark Solid-State Lighting: Solid-State Lighting on Delicious Rank Solid-State Lighting: Solid-State Lighting on Digg Find More places to share Solid-State Lighting: Solid-State Lighting on AddThis.com... Pause/Resume Photo of a large room with people standing around poster boards. Register Now for DOE's 11th Annual SSL R&D Workshop January 28-30, join other SSL R&D professionals from industry, government, and academia to learn, share, and shape the future of lighting.

193

Solid-State Lighting: Solid-State Lighting Contacts  

NLE Websites -- All DOE Office Websites (Extended Search)

About the About the Program Printable Version Share this resource Send a link to Solid-State Lighting: Solid-State Lighting Contacts to someone by E-mail Share Solid-State Lighting: Solid-State Lighting Contacts on Facebook Tweet about Solid-State Lighting: Solid-State Lighting Contacts on Twitter Bookmark Solid-State Lighting: Solid-State Lighting Contacts on Google Bookmark Solid-State Lighting: Solid-State Lighting Contacts on Delicious Rank Solid-State Lighting: Solid-State Lighting Contacts on Digg Find More places to share Solid-State Lighting: Solid-State Lighting Contacts on AddThis.com... Contacts Partnerships Solid-State Lighting Contacts For information about Solid-State Lighting, contact James Brodrick Lighting Program Manager Building Technologies Office U.S. Department of Energy

194

Solid-State Lighting: Adaptive Street Lighting Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

Adaptive Street Lighting Adaptive Street Lighting Controls to someone by E-mail Share Solid-State Lighting: Adaptive Street Lighting Controls on Facebook Tweet about Solid-State Lighting: Adaptive Street Lighting Controls on Twitter Bookmark Solid-State Lighting: Adaptive Street Lighting Controls on Google Bookmark Solid-State Lighting: Adaptive Street Lighting Controls on Delicious Rank Solid-State Lighting: Adaptive Street Lighting Controls on Digg Find More places to share Solid-State Lighting: Adaptive Street Lighting Controls on AddThis.com... Conferences & Meetings Presentations Publications Webcasts Videos Tools Adaptive Street Lighting Controls This two-part DOE Municipal Solid-State Street Lighting Consortium webinar focused on LED street lighting equipped with adaptive control components.

195

Photonic crystal light source  

DOE Patents (OSTI)

A light source is provided by a photonic crystal having an enhanced photonic density-of-states over a band of frequencies and wherein at least one of the dielectric materials of the photonic crystal has a complex dielectric constant, thereby producing enhanced light emission at the band of frequencies when the photonic crystal is heated. The dielectric material can be a metal, such as tungsten. The spectral properties of the light source can be easily tuned by modification of the photonic crystal structure and materials. The photonic crystal light source can be heated electrically or other heating means. The light source can further include additional photonic crystals that exhibit enhanced light emission at a different band of frequencies to provide for color mixing. The photonic crystal light source may have applications in optical telecommunications, information displays, energy conversion, sensors, and other optical applications.

Fleming, James G. (Albuquerque, NM); Lin, Shawn-Yu (Albuquerque, NM); Bur, James A. (Corrales, NM)

2004-07-27T23:59:59.000Z

196

Advances in Lighting  

E-Print Network (OSTI)

Increasing electricity costs have made a significant impact on lighting. The Illuminating Engineering society (I.E.S.) and the lighting industry are producing new standards, procedures and products to make lighting more appropriate and energy efficient. This paper will describe the factors which affect the performance of lighting systems, introduce the new I.E.S. procedures for selecting illuminance values and lighting power limits, and illustrate some of the recent developments in the lighting industry. The importance of efficient lighting may be measured by the potential reduction in the electrical demand, and energy consumed. Since it also represents a visible use (or misuse) of energy, it may also reflect on other aspects of a company's energy management program.

Tumber, A. J.

1981-01-01T23:59:59.000Z

197

Industrial lighting handbook  

SciTech Connect

Technological advances in industrial lighting system components now make it possible to reduce lighting system consumption by up to 50% or more without loss of the benefits inherent in good quality electric illumination. Management involvement in decisions about industrial lighting is essential, however, and this document provides generalized information in lay terms to help decision-makers become familiar with the concerns that affect industrial environment and the financial well-being of their companies. The five sections (1) discuss the benefits of good lighting, (2) review certain major lighting issues and terms, (3) identify procedures for developing a lighting energy management plan, (4) identify lighting energy management options (LEMOs), and (5) discuss sources of assistance. 19 figures, 8 tables.

1985-01-01T23:59:59.000Z

198

Evolution in lighting  

SciTech Connect

Lights consume 20-25% of the nation's electricity, establishing strong incentives to develop more efficient lighting strategies. Attention is turning to where, when, and how we light our environment, and the potential savings add up to half the lighting load nationwide. Some types of lamp are more efficient than others, but characteristics other than energy consumption may dictate where they can be used. Current lighting strategies consider task requirements, light quality, and the potential for daylighting. Energy management systems that control the timing and intensity of light and new types of energy-efficient bulbs and fixtures are increasingly attractive to consumers. The effort will require continued research and the awareness of decision makers. 4 references, 8 figures.

Lihach, N.; Pertusiello, S.

1984-06-01T23:59:59.000Z

199

Emerging Lighting Technology  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Emerging Lighting Technology Emerging Lighting Technology Bruce Kinzey Pacific Northwest National Laboratory FUPWG - Portland, OR April 20, 2011 www.ssl.energy.gov 2 | Solid-State Lighting Program GATEWAY Demonstration Program * Purpose: demonstrate new SSL products in real-world applications that save energy, match or improve illumination, and are cost- effective * Demos generate critical field experience providing: - Feedback to manufacturers - Data for utility incentives - Market readiness of specific applications to users - Advancement in lighting knowledge Central Park, NY Photo: Ryan Pyle Smithsonian American Art Museum, Washington, D.C. Photo: Scott Rosenfeld www.ssl.energy.gov 3 | Solid-State Lighting Program LED Product Explosion www.ssl.energy.gov 4 | Solid-State Lighting Program LEDs are Not a Universal Lighting

200

Harmonization of Wireless Dimming Lighting Control | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Harmonization of Wireless Dimming Lighting Harmonization of Wireless Dimming Lighting Control Harmonization of Wireless Dimming Lighting Control The U.S. Department of Energy (DOE) is currently conducting research into the harmonization of ZigBee, BACnet-or building automation and control network-and DALI-or digital addressable lighting interface-systems in wireless dimming lighting controls. Four proposed modules will enable "plug-and-play" capabilities for all DALI-compatible controls and BACnet-compatible systems. Project Description This project seeks to develop "plug-and-play" capabilities for lighting as an integrated component of a whole-building control system. Verified Energy, LLC, attempts to demonstrate the benefits of implementing wireless control in dimming applications using plug-and-play principles.

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Lighting in Commercial Buildings, 1986  

Gasoline and Diesel Fuel Update (EIA)

6 Lighting in Commercial Buildings Lighting in Commercial Buildings --1986 Overview Full Report and Tables Detailed analysis of energy consumption for lighting for U.S. commercial...

202

Energy Basics: Lighting and Daylighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Lighting Daylighting Passive Solar Design Space Heating & Cooling Water Heating Lighting and Daylighting Buildings can be lit in two ways: by using artificial lighting, or by...

203

Lighting Group: Sources and Ballasts  

NLE Websites -- All DOE Office Websites (Extended Search)

incorporating LEDs into tomorrows task lights, to reducing light entrapment within the LED, to fundamental research into how Organic Lighting Emitting Diodes operate. LED and...

204

Energy Basics: Lighting and Daylighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

by using artificial lighting, or by using daylighting, or the process of using natural sunlight, windows, and skylights to provide lighting. Learn more about: Lighting Daylighting...

205

PARS II Course Descriptions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Descriptions Descriptions PARS II Course Descriptions Sign up for PARS 102 or PARS 103, depending on your project assessment role and function. PARS 104 will be offered to site contractors as part of Dekker's Contractor deployment training. # Course Name Course Description Intended Audience PARS 102 Monthly Updating and Reporting Duration: 4 hrs Introduction to PARS II, finding and selecting projects in your domain, viewing Oversight and Assessment (OA) data, viewing Contractor Project Performance (CPP) dashboards, updating your monthly status assessment, adding attachments, and running standard, pre-built reports. Individuals who do not require monthly update training will be excused approximately one half hour early. FPD and Program staff who update the OA Monthly Status, but not other OA data.

206

Concise descriptions of subsets of structured sets  

Science Conference Proceedings (OSTI)

We study the problem of economical representation of subsets of structured sets, that is, sets equipped with a set cover. Given a structured set U, and a language L whose expressions define subsets of U, the problem of Minimum Description ...

Alberto O. Mendelzon; Ken Q. Pu

2003-06-01T23:59:59.000Z

207

Multimedia Semantic Features and Image Content Description  

Science Conference Proceedings (OSTI)

Content-based indexing and retrieval of images and video requires a proper semantic description for image content. This paper discusses the mapping of high-level, application-specific, features to the visual primitives that are accessible through image ...

M. Cavazza; R. J. Green; I. J. Palmer

1998-10-01T23:59:59.000Z

208

Individual Reuse in Description Logic Reasoning  

Science Conference Proceedings (OSTI)

Tableau calculi are the state-of-the-art for reasoning in description logics (DL). Despite recent improvements, tableau-based reasoners still cannot process certain knowledge bases (KBs), mainly because they end up building very large models. To address ...

Boris Motik; Ian Horrocks

2008-08-01T23:59:59.000Z

209

VEHICLE DETAILS, BATTERY DESCRIPTION AND SPECIFICATIONS Vehicle...  

NLE Websites -- All DOE Office Websites (Extended Search)

Page 1 VEHICLE DETAILS, BATTERY DESCRIPTION AND SPECIFICATIONS Vehicle Details Base Vehicle: 2011 Nissan Leaf VIN: JN1AZ0CP5BT000356 Propulsion System: BEV Electric Machine: 80 kW...

210

EMERGENCY RESPONSE ORGANIZATION TRAINING PROGRAM DESCRIPTION  

SciTech Connect

This document establishes requirements for Emergency Response Organization Training. This program description applies to all Project Hanford Management Contract (PHMC) contractor and subcontractor employees who are identified to fulfill Hanford Site Emergency Response Organization (ERO) positions.

MITCHELL, L.J.

2001-06-20T23:59:59.000Z

211

Multiple-description multistage vector quantization  

Science Conference Proceedings (OSTI)

Multistage vector quantization (MSVQ) is a technique for low complexity implementation of high-dimensional quantizers, which has found applications within speech, audio, and image coding. In this paper, a multiple-description MSVQ (MD-MSVQ) targeted ...

Pradeepa Yahampath

2007-07-01T23:59:59.000Z

212

CALIPSO Lidar Description and Performance Assessment  

Science Conference Proceedings (OSTI)

This paper provides background material for a collection of Cloud–Aerosol Lidar with Orthogonal Polarization (CALIOP) algorithm papers that are to be published in the Journal of Atmospheric and Oceanic Technology. It provides a brief description ...

William H. Hunt; David M. Winker; Mark A. Vaughan; Kathleen A. Powell; Patricia L. Lucker; Carl Weimer

2009-07-01T23:59:59.000Z

213

NIST, Advancing Innovation, Defining the Future, Descriptive ...  

Science Conference Proceedings (OSTI)

... Black and white image of a four towers wrapped in lightning. ... Photos of Thomas Edison, a phonograph, a light bulb and a black and white movie of ...

2011-06-27T23:59:59.000Z

214

Solid-State Lighting: Solid-State Lighting Manufacturing Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Solid-State Lighting Solid-State Lighting Manufacturing Workshop to someone by E-mail Share Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Facebook Tweet about Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Twitter Bookmark Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Google Bookmark Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Delicious Rank Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Digg Find More places to share Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on AddThis.com... Conferences & Meetings Past Conferences Presentations Publications Webcasts Videos Tools Solid-State Lighting Manufacturing Workshop Nearly 200 lighting industry leaders, chip makers, fixture and component

215

Lighting the Way with Compact Fluorescent Lighting | Department...  

NLE Websites -- All DOE Office Websites (Extended Search)

and compact fluorescent lights. And I've already purchased a few of the new light emitting diode (LED) solid-state lighting lights-but that's the topic of a future blog. Stay...

216

LightBox -Exploring Interaction Modalities with Colored Light  

E-Print Network (OSTI)

-bright multi- colored light-emitting diodes (LEDs) of our system can generate any visible lighting color

217

Lighting the Night: Technology, Urban Life and the Evolution of Street Lighting [Light in Place  

E-Print Network (OSTI)

Electrical 16. "Highway Lighting by So­ dium Vapor Lamps,"Possibilities of Street: Lighting Improve­ ments," TheLaunches Broad Street Lighting Promotion Campaign," The

Holden, Alfred

1992-01-01T23:59:59.000Z

218

Lighting the Night: Technology, Urban Life and the Evolution of Street Lighting [Light in Place  

E-Print Network (OSTI)

May 1912), 783. 8. "New Street Lights Increase Trade 3 5 Perlight, including street light, became part of America'sBeautiful-inspired street­ lights graced wealthy residen­

Holden, Alfred

1992-01-01T23:59:59.000Z

219

Lighting Research Group: Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Facilities Facilities Lighting Research Facilities at LBNL gonio-photometer Gonio-photometer We use this device to measure the intensity and direction of the light from a lamp or fixture. integrating sphere Integrating sphere This instrument allows us to get a fast and accurate measurement of the total light output of a lamp. We are not able to determine the direction of the light, only the intensity. power analyzer Power analyzer We use our power analyzer with the lamps in the gonio-photometer to measure input power, harmonic distortion, power factor, and many other signals that tell us how well a lamp is performing. spectro-radiometer Spectro-radiometer This device measures not only the intensity of a light source but also the intensity of the light at each wavelength.

220

Lighting Group: Software  

NLE Websites -- All DOE Office Websites (Extended Search)

Software Software Lighting Software The Lighting Group has developed several computer programs in the course of conducting research on energy efficient lighting. Several of these programs have proven useful outside the research environment. One of the most popular programs for advanced lighting applications is Radiance. For more information on this program and its availability, click on the link below. RADIANCE Radiance is a suite of programs for the analysis and visualization of lighting in design. The primary advantage of Radiance over simpler lighting calculation and rendering tools is that there are no limitations on the geometry or the materials that may be simulated. Radiance is used by architects and engineers to predict illumination, visual quality and appearance of innovative design spaces, and by researchers to evaluate new

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

High-Intensity Discharge Lighting  

Energy.gov (U.S. Department of Energy (DOE))

High-intensity discharge (HID) lighting provides the highest efficacy and longest service life of any lighting type. It can save 75%-90% of lighting energy when it replaces incandescent lighting.

222

Solid-State Lighting: Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

about Solid-State Lighting: Tools on Twitter Bookmark Solid-State Lighting: Tools on Google Bookmark Solid-State Lighting: Tools on Delicious Rank Solid-State Lighting: Tools on...

223

Solid-State Lighting: News  

NLE Websites -- All DOE Office Websites (Extended Search)

about Solid-State Lighting: News on Twitter Bookmark Solid-State Lighting: News on Google Bookmark Solid-State Lighting: News on Delicious Rank Solid-State Lighting: News on...

224

Arnold Schwarzenegger LIGHTING RESEARCH PROGRAM  

E-Print Network (OSTI)

Project Summaries ELEMENT 2: ADVANCE LIGHTING TECHNOLOGIES PROJECT 2.1 LIGHT EMITTING DIODE (LED light emitting diodes (LED) technology for general lighting applications by developing a task lamp

225

Advanced Light Sources  

Science Conference Proceedings (OSTI)

In the generation of artificial light using electric lamps, photometric and color performance have been paramount in lamp design, manufacturing, measurement, lighting design, and visual perception. Many designers and researchers have strived to understand how light and color are generated, related, and to improve them. This has stemmed from the development of incandescent lamps, halogen lamps, linear fluorescent lamps, high-intensity discharge (HID) lamps, and compact fluorescent lamps (CFLs) among other...

2008-03-31T23:59:59.000Z

226

Advanced Lighting Technologies  

Science Conference Proceedings (OSTI)

This report continues the technical assessment of advanced lighting technologies in the following product areasdimmable light-emitting diode (LED) screw-in replacement lamp, hybrid compact fluorescent lamp/halogen screw-in replacement lamp, replacement recessed can LED downlight, organic LED (OLED) disc, replacement mini high-intensity discharge (HID) lamp and ballast system, and solid-state plasma lighting (miniature HID technology) high-bay fixture. The research in this project helps to demonstrate how...

2011-12-21T23:59:59.000Z

227

Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Pedestrian-Friendly Nighttime Pedestrian-Friendly Nighttime Lighting to someone by E-mail Share Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Facebook Tweet about Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Twitter Bookmark Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Google Bookmark Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Delicious Rank Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Digg Find More places to share Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on AddThis.com... Conferences & Meetings Presentations Publications Webcasts Videos Tools Pedestrian-Friendly Nighttime Lighting This November 19, 2013 webinar presented issues and considerations related to pedestrian-friendly nighttime lighting, such as color rendering, safety,

228

Total Light Management  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Light Management Light Management Why is saving Energy Important World Electricity Consumption (2007) Top 20 Countries 0 500 1000 1500 2000 2500 3000 3500 4000 4500 U n i t e d S t a t e s C h i n a J a p a n R u s s i a I n d i a G e r m a n y C a n a d a A f r i c a F r a n c e B r a z i l K o r e a , S o u t h U n i t e d K i n g d o m I t a l y S p a i n A u s t r a l i a T a i w a n S o u t h A f r i c a M e x i c o S a u d i A r a b i a I r a n Billion kWh Source: US DOE Energy Information Administration Lighting Control Strategies 4 5 6 Occupancy/Vacancy Sensing * The greatest energy savings achieved with any lighting fixture is when the lights are shut off * Minimize wasted light by providing occupancy sensing or vacancy sensing 7 8 Daylight Harvesting * Most commercial space has enough natural light flowing into it, and the amount of artificial light being generated can be unnecessary * Cut back on the production of artificial lighting by

229

Light truck forecasts  

SciTech Connect

The recent dramatic increase in the number of light trucks (109% between 1963 and 1974) has prompted concern about the energy consequences of the growing popularity of the light truck. An estimate of the future number of light trucks is considered to be a reasonable first step in assessing the energy impact of these vehicles. The monograph contains forecasts based on two models and six scenarios. The coefficients for the models have been derived by ordinary least squares regression of national level time series data. The first model is a two stage model. The first stage estimates the number of light trucks and cars (together), and the second stage applies a share's submodel to determine the number of light trucks. The second model is a simultaneous equation model. The two models track one another remarkably well, within about 2%. The scenarios were chosen to be consistent with those used in the Lindsey-Kaufman study Projection of Light Truck Population to Year 2025. Except in the case of the most dismal economic scenario, the number of light trucks is expected to increase from the 1974 level of 0.09 light truck per person to about 0.12 light truck per person in 1995.

Liepins, G.E.

1979-09-01T23:59:59.000Z

230

Photovoltaic lighting system performance  

DOE Green Energy (OSTI)

The performance of 21 PV-powered low pressure sodium lighting systems on a multi-use has been documented in this paper. Specific areas for evaluation include the vandal resistant PV modules, constant voltage and on/off PV charge controllers, flooded deep-cycle lead-antimony and valve regulated lead-acid (VLRA) gel batteries, and low pressure sodium ballasts and lights. The PV lighting system maintenance intervals and lessons learned have been documented over the past 2.5 years. The above performance data has shown that with careful hardware selection, installation, and maintenance intervals the PV lighting systems will operate reliably.

Harrington, S.R.; Hund, T.D.

1996-06-01T23:59:59.000Z

231

Faster Than Light?  

E-Print Network (OSTI)

It is argued that special relativity remains a viable physical theory even when there is permitted signals traveling faster than light.

Robert Geroch

2010-05-10T23:59:59.000Z

232

SITE LIGHTING FOUNDATIONS  

SciTech Connect

The purpose of this analysis is to design structural foundations for the Site Lighting. This analysis is in support of design drawing BABBDF000-01717-2100-23016.

M. Gomez

1995-01-17T23:59:59.000Z

233

Advanced Demand Responsive Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency Program and Market Trends High Technology and Industrial Buildings Lighting Systems Residential Buildings Simulation Tools Sustainable Federal Operations Windows...

234

NIST Stray light correction  

Science Conference Proceedings (OSTI)

... A correction, which can be done in real time, can reduce errors due to stray light by more than one order of magnitude. ...

2012-10-02T23:59:59.000Z

235

Energy Basics: Fluorescent Lighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

& Cooling Water Heating Fluorescent Lighting Fluorescent lamps use 25%-35% of the energy used by incandescent lamps to provide the same amount of illumination (efficacy of...

236

Search for the Light Charged Higgs in CMS  

E-Print Network (OSTI)

In this report the CMS potential for the light charged Higgs boson discovery in the Minimal Supersymmetric Standard Model is presented. First the latest results of the Tevatron and LEP experiments on the light charged Higgs search are reminded. In the rest of the report the perspectives of CMS for the light charged Higgs search are presented with description of some details of the analysis. The results are based on the full simulation and reconstruction of the CMS detector including the systematic uncertainties on the background determination. Finally the $\\rm 5\\sigma$ discovery contour for an integrated luminosity of $\\rm 30fb^{-1}$ is shown.

M. Hashemi

2006-12-09T23:59:59.000Z

237

Data:47850160-050f-47f4-9c22-6914dc9e39ad | Open Energy Information  

Open Energy Info (EERE)

0-050f-47f4-9c22-6914dc9e39ad 0-050f-47f4-9c22-6914dc9e39ad No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Electrical Dist No3 Pinal Cnty Effective date: 2012/12/19 End date if known: Rate name: RATE NO. 09 DUSK TO DAWN LIGHTING-Metal Halide 100W Sector: Lighting Description: Applicability: To all customers for the purposes of outdoor lighting other than street and highway lighting service of privately owned property. Electric service is provided from dusk to dawn. ED3 will install, own, operate and maintain the complete lighting installation, including lamp replacements. Monthly Usage: 44.5kWh

238

Data:9459f3d0-afa0-47d6-ab51-21d369ccddbb | Open Energy Information  

Open Energy Info (EERE)

d0-afa0-47d6-ab51-21d369ccddbb d0-afa0-47d6-ab51-21d369ccddbb No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Electrical Dist No3 Pinal Cnty Effective date: 2011/01/01 End date if known: Rate name: RATE NO. 09 DUSK TO DAWN LIGHTING-High Pressure Sodium 70W Sector: Lighting Description: Applicability: To all customers for the purposes of outdoor lighting other than street and highway lighting service of privately owned property. Electric service is provided from dusk to dawn. ED3 will install, own, operate and maintain the complete lighting installation, including lamp replacements. Monthly Usage: 28.6kWh

239

Data:E06da27f-2da7-4aac-b8cf-f6564faf6c90 | Open Energy Information  

Open Energy Info (EERE)

7f-2da7-4aac-b8cf-f6564faf6c90 7f-2da7-4aac-b8cf-f6564faf6c90 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Electrical Dist No3 Pinal Cnty Effective date: 2011/01/01 End date if known: Rate name: RATE NO. 09 DUSK TO DAWN LIGHTING-Low Pressure Sodium 35W Sector: Lighting Description: Applicability: To all customers for the purposes of outdoor lighting other than street and highway lighting service of privately owned property. Electric service is provided from dusk to dawn. ED3 will install, own, operate and maintain the complete lighting installation, including lamp replacements. Monthly Usage: 21.7kWh

240

Data:7df05a27-900b-44d6-80ef-e76c18ce51f9 | Open Energy Information  

Open Energy Info (EERE)

7-900b-44d6-80ef-e76c18ce51f9 7-900b-44d6-80ef-e76c18ce51f9 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Electrical Dist No3 Pinal Cnty Effective date: 2011/01/01 End date if known: Rate name: RATE NO. 09 DUSK TO DAWN LIGHTING-Mercury Vapor 175W Sector: Lighting Description: Applicability: To all customers for the purposes of outdoor lighting other than street and highway lighting service of privately owned property. Electric service is provided from dusk to dawn. ED3 will install, own, operate and maintain the complete lighting installation, including lamp replacements. Monthly Usage: 74.5kWh

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Data:9fb6b5cd-2025-477e-a609-a7d1a5aa3c33 | Open Energy Information  

Open Energy Info (EERE)

cd-2025-477e-a609-a7d1a5aa3c33 cd-2025-477e-a609-a7d1a5aa3c33 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Electrical Dist No3 Pinal Cnty Effective date: 2012/12/19 End date if known: Rate name: RATE NO. 09 DUSK TO DAWN LIGHTING-High Pressure Sodium 100W Sector: Lighting Description: Applicability: To all customers for the purposes of outdoor lighting other than street and highway lighting service of privately owned property. Electric service is provided from dusk to dawn. ED3 will install, own, operate and maintain the complete lighting installation, including lamp replacements.

242

Data:5573c503-44ea-43d4-a4e5-db1459ea7fd5 | Open Energy Information  

Open Energy Info (EERE)

3-44ea-43d4-a4e5-db1459ea7fd5 3-44ea-43d4-a4e5-db1459ea7fd5 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Electrical Dist No3 Pinal Cnty Effective date: 2011/01/01 End date if known: Rate name: RATE NO. 09 DUSK TO DAWN LIGHTING-High Pressure Sodium 50W Sector: Lighting Description: Applicability: To all customers for the purposes of outdoor lighting other than street and highway lighting service of privately owned property. Electric service is provided from dusk to dawn. ED3 will install, own, operate and maintain the complete lighting installation, including lamp replacements. Monthly Usage: 20kWh

243

Data:B2aacbc2-5e47-4f51-9d91-94f2ad9a2957 | Open Energy Information  

Open Energy Info (EERE)

aacbc2-5e47-4f51-9d91-94f2ad9a2957 aacbc2-5e47-4f51-9d91-94f2ad9a2957 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Electrical Dist No3 Pinal Cnty Effective date: 2011/01/01 End date if known: Rate name: RATE NO. 09 DUSK TO DAWN LIGHTING-Low Pressure Sodium 55W Sector: Lighting Description: Applicability: To all customers for the purposes of outdoor lighting other than street and highway lighting service of privately owned property. Electric service is provided from dusk to dawn. ED3 will install, own, operate and maintain the complete lighting installation, including lamp replacements.

244

Data:0d344380-6271-46b0-80ad-5110a9e22152 | Open Energy Information  

Open Energy Info (EERE)

6271-46b0-80ad-5110a9e22152 6271-46b0-80ad-5110a9e22152 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Electrical Dist No3 Pinal Cnty Effective date: 2012/12/19 End date if known: Rate name: RATE NO. 09 DUSK TO DAWN LIGHTING-High Pressure Sodium 200W Sector: Lighting Description: Applicability: To all customers for the purposes of outdoor lighting other than street and highway lighting service of privately owned property. Electric service is provided from dusk to dawn. ED3 will install, own, operate and maintain the complete lighting installation, including lamp replacements. Monthly Usage: 84.9kWh

245

Data:56a0b8b5-d3f1-4281-8b9c-150b169af7d7 | Open Energy Information  

Open Energy Info (EERE)

b8b5-d3f1-4281-8b9c-150b169af7d7 b8b5-d3f1-4281-8b9c-150b169af7d7 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Electrical Dist No3 Pinal Cnty Effective date: 2012/12/19 End date if known: Rate name: RATE NO. 09 DUSK TO DAWN LIGHTING-High Pressure Sodium 250W Sector: Lighting Description: Applicability: To all customers for the purposes of outdoor lighting other than street and highway lighting service of privately owned property. Electric service is provided from dusk to dawn. ED3 will install, own, operate and maintain the complete lighting installation, including lamp replacements.

246

Data:E75f7e4d-ed5e-4a8d-b53b-74d3efc15ee5 | Open Energy Information  

Open Energy Info (EERE)

ed5e-4a8d-b53b-74d3efc15ee5 ed5e-4a8d-b53b-74d3efc15ee5 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Electrical Dist No3 Pinal Cnty Effective date: 2012/12/19 End date if known: Rate name: RATE NO. 09 DUSK TO DAWN LIGHTING-High Pressure Sodium 400W Sector: Lighting Description: Applicability: To all customers for the purposes of outdoor lighting other than street and highway lighting service of privately owned property. Electric service is provided from dusk to dawn. ED3 will install, own, operate and maintain the complete lighting installation, including lamp replacements. Monthly Usage: 153kWh

247

Data:E15b8fca-e91d-4d28-8b8f-297225304ec2 | Open Energy Information  

Open Energy Info (EERE)

fca-e91d-4d28-8b8f-297225304ec2 fca-e91d-4d28-8b8f-297225304ec2 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Electrical Dist No3 Pinal Cnty Effective date: 2012/12/19 End date if known: Rate name: RATE NO. 09 DUSK TO DAWN LIGHTING-Metal Halide 250W Sector: Lighting Description: Applicability: To all customers for the purposes of outdoor lighting other than street and highway lighting service of privately owned property. Electric service is provided from dusk to dawn. ED3 will install, own, operate and maintain the complete lighting installation, including lamp replacements. Monthly Usage: 101.8kWh

248

Data:14573167-660b-4a18-a1f7-8ee11b9d5419 | Open Energy Information  

Open Energy Info (EERE)

7-660b-4a18-a1f7-8ee11b9d5419 7-660b-4a18-a1f7-8ee11b9d5419 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Electrical Dist No3 Pinal Cnty Effective date: 2011/01/01 End date if known: Rate name: RATE NO. 09 DUSK TO DAWN LIGHTING-Metal Halide 175W Sector: Lighting Description: Applicability: To all customers for the purposes of outdoor lighting other than street and highway lighting service of privately owned property. Electric service is provided from dusk to dawn. ED3 will install, own, operate and maintain the complete lighting installation, including lamp replacements. Monthly Usage: 74.2kWh

249

Data:77e388ab-ede5-4eec-9532-3e7628c8938c | Open Energy Information  

Open Energy Info (EERE)

ab-ede5-4eec-9532-3e7628c8938c ab-ede5-4eec-9532-3e7628c8938c No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Electrical Dist No3 Pinal Cnty Effective date: 2012/12/19 End date if known: Rate name: RATE NO. 09 DUSK TO DAWN LIGHTING-High Pressure Sodium 150W Sector: Lighting Description: Applicability: To all customers for the purposes of outdoor lighting other than street and highway lighting service of privately owned property. Electric service is provided from dusk to dawn. ED3 will install, own, operate and maintain the complete lighting installation, including lamp replacements.

250

Data:9e9897d1-8945-453e-b881-9fc371a02ed1 | Open Energy Information  

Open Energy Info (EERE)

d1-8945-453e-b881-9fc371a02ed1 d1-8945-453e-b881-9fc371a02ed1 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Electrical Dist No3 Pinal Cnty Effective date: 2011/01/01 End date if known: Rate name: RATE NO. 09 DUSK TO DAWN LIGHTING-Mercury Vapor 400W Sector: Lighting Description: Applicability: To all customers for the purposes of outdoor lighting other than street and highway lighting service of privately owned property. Electric service is provided from dusk to dawn. ED3 will install, own, operate and maintain the complete lighting installation, including lamp replacements. Monthly Usage: 168.5kWh

251

Data:B00c9b52-f98a-4e34-b7a5-bdce7f9975c0 | Open Energy Information  

Open Energy Info (EERE)

b52-f98a-4e34-b7a5-bdce7f9975c0 b52-f98a-4e34-b7a5-bdce7f9975c0 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Electrical Dist No3 Pinal Cnty Effective date: 2011/01/01 End date if known: Rate name: RATE NO. 09 DUSK TO DAWN LIGHTING-Metal Halide 75W Sector: Lighting Description: Applicability: To all customers for the purposes of outdoor lighting other than street and highway lighting service of privately owned property. Electric service is provided from dusk to dawn. ED3 will install, own, operate and maintain the complete lighting installation, including lamp replacements. Monthly Usage: 32.7kWh

252

Data:3f06f0c9-7348-44c6-8b30-d37f3aa68b9b | Open Energy Information  

Open Energy Info (EERE)

7348-44c6-8b30-d37f3aa68b9b 7348-44c6-8b30-d37f3aa68b9b No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Electrical Dist No3 Pinal Cnty Effective date: 2011/01/01 End date if known: Rate name: RATE NO. 09 DUSK TO DAWN LIGHTING-Low Pressure Sodium 90W Sector: Lighting Description: Applicability: To all customers for the purposes of outdoor lighting other than street and highway lighting service of privately owned property. Electric service is provided from dusk to dawn. ED3 will install, own, operate and maintain the complete lighting installation, including lamp replacements. Monthly Usage: 45.2kWh

253

Data:0e86fd53-df62-4cd4-b999-214ef1feada5 | Open Energy Information  

Open Energy Info (EERE)

fd53-df62-4cd4-b999-214ef1feada5 fd53-df62-4cd4-b999-214ef1feada5 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Electrical Dist No3 Pinal Cnty Effective date: 2011/01/01 End date if known: Rate name: RATE NO. 09 DUSK TO DAWN LIGHTING-Low Pressure Sodium 135W Sector: Lighting Description: Applicability: To all customers for the purposes of outdoor lighting other than street and highway lighting service of privately owned property. Electric service is provided from dusk to dawn. ED3 will install, own, operate and maintain the complete lighting installation, including lamp replacements.

254

Data:Aebe4298-2a63-4843-a004-a1f867b81a1d | Open Energy Information  

Open Energy Info (EERE)

Aebe4298-2a63-4843-a004-a1f867b81a1d Aebe4298-2a63-4843-a004-a1f867b81a1d No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Electrical Dist No3 Pinal Cnty Effective date: 2011/01/01 End date if known: Rate name: RATE NO. 09 DUSK TO DAWN LIGHTING-Low Pressure Sodium 185W Sector: Lighting Description: Applicability: To all customers for the purposes of outdoor lighting other than street and highway lighting service of privately owned property. Electric service is provided from dusk to dawn. ED3 will install, own, operate and maintain the complete lighting installation, including lamp replacements.

255

Data:3021aa51-1b07-4d59-b760-234dfbcda1f5 | Open Energy Information  

Open Energy Info (EERE)

1-1b07-4d59-b760-234dfbcda1f5 1-1b07-4d59-b760-234dfbcda1f5 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Coahoma Electric Power Assn Effective date: 2009/01/31 End date if known: Rate name: 19 - Security Light 100 watt sodium Sector: Lighting Description: To all consumers including within the allocated service areas and subject to the established rules and regulations of the Association. For controlled multiple street lighting and private security lighting from dusk to dawn. Unmetered outdoor lighting from dusk to dawn installed within 100 feet of the Association's existing overhead pole lines where secondary voltage is available.

256

Lakeview Light and Power - Commercial Lighting Rebate Program | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lakeview Light and Power - Commercial Lighting Rebate Program Lakeview Light and Power - Commercial Lighting Rebate Program Lakeview Light and Power - Commercial Lighting Rebate Program < Back Eligibility Commercial Fed. Government Local Government Nonprofit State Government Savings Category Appliances & Electronics Commercial Lighting Lighting Program Info Funding Source Funded by Bonneville Power Administration Expiration Date 9/1/2013 State District of Columbia Program Type Utility Rebate Program Rebate Amount Commercial Lighting Installation: Up to 70% of cost Provider Lakeview Light and Power Lakeview Light and Power offers a commercial lighting rebate program. Rebates apply to the installation of energy efficient lighting retrofits in non-residential buildings. The rebate program is funded by BPA and ends in September of 2010 or earlier if the funding is exhausted. Lakeview Light

257

The gravity of light  

E-Print Network (OSTI)

A solution of the old problem raised by Tolman, Ehrenfest, Podolsky and Wheeler, concerning the lack of attraction of two light pencils "moving parallel", is proposed, considering that the light can be source of nonlinear gravitational waves corresponding (in the would be quantum theory of gravity) to spin-1 massless particles.

G. Sparano; G. Vilasi; S. Vilasi

2010-09-12T23:59:59.000Z

258

Explosively pumped laser light  

DOE Patents (OSTI)

A single shot laser pumped by detonation of an explosive in a shell casing. The shock wave from detonation of the explosive causes a rare gas to luminesce. The high intensity light from the gas enters a lasing medium, which thereafter outputs a pulse of laser light to disable optical sensors and personnel.

Piltch, Martin S. (Los Alamos, NM); Michelotti, Roy A. (Los Alamos, NM)

1991-01-01T23:59:59.000Z

259

Developing architectural lighting representations  

Science Conference Proceedings (OSTI)

This paper reports on the development of a visualization system for architectural lighting designers. It starts by motivating the problem as both complex in its physics and social organization. Three iterations of prototypes for displaying time and space ... Keywords: architectural lighting design, energy efficiency, ethnographic fieldwork, information visualization, qualitative analysis

Daniel C. Glaser; Roger Tan; John Canny; Ellen Yi-Luen Do

2003-10-01T23:59:59.000Z

260

Light intensity compressor  

DOE Patents (OSTI)

In a system for recording images having vastly differing light intensities over the face of the image, a light intensity compressor is provided that utilizes the properties of twisted nematic liquid crystals to compress the image intensity. A photoconductor or photodiode material that is responsive to the wavelength of radiation being recorded is placed adjacent a layer of twisted nematic liquid crystal material. An electric potential applied to a pair of electrodes that are disposed outside of the liquid crystal/photoconductor arrangement to provide an electric field in the vicinity of the liquid crystal material. The electrodes are substantially transparent to the form of radiation being recorded. A pair of crossed polarizers are provided on opposite sides of the liquid crystal. The front polarizer linearly polarizes the light, while the back polarizer cooperates with the front polarizer and the liquid crystal material to compress the intensity of a viewed scene. Light incident upon the intensity compressor activates the photoconductor in proportion to the intensity of the light, thereby varying the field applied to the liquid crystal. The increased field causes the liquid crystal to have less of a twisting effect on the incident linearly polarized light, which will cause an increased percentage of the light to be absorbed by the back polarizer. The intensity of an image may be compressed by forming an image on the light intensity compressor.

Rushford, Michael C. (Livermore, CA)

1990-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

SURFACE INDUSTRIAL HVAC SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect

The purpose of this system description document (SDD) is to establish requirements that drive the design of the surface industrial heating, ventilation, and air-conditioning (HVAC) system and its bases to allow the design effort to proceed to license application. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. The SDD follows the design with regard to the description of the system. The description that provided in this SDD reflects the current results of the design process.

M.M. Ansari

2005-04-05T23:59:59.000Z

262

Business Case Slide 29: High-Value: Energy Uses - Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Uses - Description Previous Slide Next Slide Table of Contents High-Value: Energy Uses - Description Description Use DUO2 as the core component of advanced energy systems Fuel cell...

263

A survey of temporal extensions of description logics  

Science Conference Proceedings (OSTI)

This paper surveys the temporal extensions of description logics appearearing in the literature. The analysis considers a large spectrum of approaches appearearing in the temporal description logics area: from the loosely coupled approaches – which ... Keywords: description logics, temporal logics

Alessandro Artale; Enrico Franconi

2001-03-01T23:59:59.000Z

264

Exploring Lighting Spaces  

E-Print Network (OSTI)

We present a simple system for interactively specifying lighting parameters, including position, for high-quality image synthesis. Unlikeinverse approaches to the lighting-design problem, we do not require the user to indicate a priori the desired illuminative characteristics of an image. In our approach the computer proposes, culls, and organizes a set of candidate lights automatically, using an elementary measure of image similarityasthe basis for both culling and organization. The user then browses the set of candidate-light images, selects which lights to include, and combines them as desired. This work is a particular instance of a general strategy --- sampling a design space broadly and intelligently and organizing the results for rapid browsing by the user --- that may be applicable to many other design problems in computer graphics.

T. Kang; J. Seims; J. Marks; S. Shieber

1996-01-01T23:59:59.000Z

265

Hybrid lighting: Illuminating our future  

SciTech Connect

Hybrid lighting is a combination of natural and artificial illumination to be used indoors for all lighting needs. Ideally, hybrid lighting is effectively indistinguishable from standard artificial lighting except in quality and cost, where it will likely be an improvement. Hybrid lighting systems are produced by a combination of four technologies: collecting natural light, generating artificial light, transporting and distributing light to where it is needed, and controlling the amounts of both natural and artificial light continuously during usage. Lighting demands a large fraction of our energy needs. If we can control or decrease this demand, we are able to accommodate societal growth without energy demand growth.

Cates, M.R.

1996-12-31T23:59:59.000Z

266

Microsoft Word - HQ ISM System Description Final  

National Nuclear Security Administration (NNSA)

NA-1 SD 450.4-1 NA-1 SD 450.4-1 Approved: 10-23-07 National Nuclear Security Administration Headquarters Integrated Safety Management System Description This NNSA Headquarters Integrated Safety Management System Description describes the NNSA Headquarters role in establishing expectations and accomplishing work in a safe and environmentally sound manner to successfully execute the NNSA mission and strategic goals. NNSA senior managers strongly support and are personally committed to implementation of the policy and principles of Integrated Safety Management. Approved: &? .> ,& o & k Thomas P. D7Ago, tino Administrator h Table of Contents EXECUTIVE SUMMARY .............................................................................................................

267

Void fraction system computer software design description  

DOE Green Energy (OSTI)

This document describes the software that controls the void fraction instrument. The format of the document may differ from typical Software Design Reports because it was created with a graphical programming language. Hardware is described in Section 2. The purpose of this document is describe the software, so the hardware description is brief. Software is described in Section 3. LabVIEW was used to develop the viscometer software, so Section 3 begins with an introduction to LabVIEW. This is followed by a description of the main program. Finally each Westinghouse developed subVI (sub program) is discussed.

Gimera, M.

1995-02-15T23:59:59.000Z

268

Linac Coherent Light Source Overview | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Linac Coherent Light Source Overview Linac Coherent Light Source Overview Linac Coherent Light Source Overview Addthis Description Take an animated tour of the Linac Coherent Light Source (LCLS). Follow the laser pulse from the injector gun all the way through to the Far Experimental Hall. Duration 5:50 Topic Physics Credit Energy Department Video MR. : The SLAC National Accelerator Laboratory is located in the heart of California's beautiful San Francisco Bay Area. Operated by Stanford University for the U.S. Department of Energy, SLAC has been home to the world's longest particle accelerator for nearly 50 years. In 2009 SLAC ushered in a new era in its long history of physics research with a new kind of laser called the Linac Coherent Light Source, or LCLS. The LCLS is the first laser in the world to produce hard X-rays, which can

269

SLAC Linac Coherent Light Source User Site  

NLE Websites -- All DOE Office Websites (Extended Search)

Welcome to the LCLS User Resources Site Welcome to the LCLS User Resources Site User Portal | Agreements | Data Collection & Analysis | Logistics | Policies | Proposals | Safety | Schedules | Shipping The Linac Coherent Light Source (LCLS) encourages scientists from diverse fields to submit proposals for experiments that utilize the LCLS's unique capabilities. Interested scientists are encouraged to learn more about the latest developments by contacting LCLS staff scientists and by reviewing the instrument descriptions. Step-By-Step Instructions to Working at LCLS Review LCLS Policies Review Machine FAQ & Parameters Register and Submit Proposals Confirm User Agreement Reserve Accommodations Complete Safety Training Request Computer Account Establish User Account Ship Samples/Equipment Review Check-in Procedures

270

Light and Bread Mold  

NLE Websites -- All DOE Office Websites (Extended Search)

Light and Bread Mold Light and Bread Mold Name: CHASE Location: N/A Country: N/A Date: N/A Question: HOW CAN I EFICTIVELY TEST THE EFFECTS OF LIGHT ON BREAD MOLD? Replies: Hello Chase, In order to test the effects of light on bread mould you need to set up an experiment. There are two things you need to have in your experiment to make it a good experiment: 1. A 'control'. 2. Replicates 1. The 'control' Obviously in order to test the effects of light on bread mold you will need to actually shine some light on some bread mold and see what happens. This is your 'treatment'. However, it is vitally important that you know what would have happened without the treatment (in this case added light). Let's pretend that you do a test a you find that the bread mold under the light actually dies. How do you know if your bread mold died because light was added or because at that time of year all bread mold would die naturally or because by adding light you caused the temperature to rise and that killed the bread mold? The answer is that you do not know unless you have taken the trouble to find out with anouther test called the 'control'. The 'control' is a piece of bread mold, identical to the 'treatment' bread mold, which is placed in identical conditions to the 'treatment' piece of bread mold except that light is removed. Your 'control' piece of bread mold will need to be (to the best of your abillity) at the same temperature, in the same area, at similar humidity, etc. Part of the skill of designing a scientific experiment is being able think of all the possible things which might be affecting the bread mold and keeping them the same in both the 'treatment' and the 'control' (except, of course, for the presence of light) so that when you find a difference between the 'treatment' and the 'control' you are sure that it is the result of the light rather than something else.

271

Business Case Slide 6: High-Volume: Repository - Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Volume: Repository - Description Description of potential uses Structural component of cask (basket, wall) as a cermet Cermet: DUO2 particles embedded in steel matrix Fill material...

272

Business Case Slide 22: High-Value: Catalysts - Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Catalysts - Description Graduate student examining candidate DU-bearing catalyst Graduate student examining candidate DU-bearing catalyst Description Use DUO2 to catalyze chemical...

273

Microsoft Word - 338M_Geothermal_Project_Descriptions | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Marketing Administration Other Agencies You are here Home Microsoft Word - 338MGeothermalProjectDescriptions Microsoft Word - 338MGeothermalProjectDescriptions Microsoft...

274

Columbia Water and Light - HVAC and Lighting Efficiency Rebates |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Columbia Water and Light - HVAC and Lighting Efficiency Rebates Columbia Water and Light - HVAC and Lighting Efficiency Rebates Columbia Water and Light - HVAC and Lighting Efficiency Rebates < Back Eligibility Commercial Industrial Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Heat Pumps Appliances & Electronics Commercial Lighting Lighting Maximum Rebate Lighting: 50% of invoiced cost up to $22,500 Program Info State Missouri Program Type Utility Rebate Program Rebate Amount HVAC Replacements: $570 - $3,770 Lighting: $300/kW reduction or half of project cost Provider Columbia Water and Light Columbia Water and Light (CWL) offers rebates to its commercial and industrial customers for the purchase of high efficiency HVAC installations and efficient lighting. Incentives for certain measures are based upon the

275

Induction Lighting: An Old Lighting Technology Made New Again | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Induction Lighting: An Old Lighting Technology Made New Again Induction Lighting: An Old Lighting Technology Made New Again Induction Lighting: An Old Lighting Technology Made New Again July 27, 2009 - 5:00am Addthis John Lippert Induction lighting is one of the best kept secrets in energy-efficient lighting. Simply stated, induction lighting is essentially a fluorescent light without electrodes or filaments, the items that frequently cause other bulbs to burn out quickly. Thus, many induction lighting units have an extremely long life of up to 100,000 hours. To put this in perspective, an induction lighting system lasting 100,000 hours will last more than 11 years in continuous 24/7 operation, and 25 years if operated 10 hours a day. The technology, however, is far from new. Nikola Tesla demonstrated induction lighting in the late 1890s around the same time that his rival,

276

Borough of Park Ridge, New Jersey (Utility Company) | Open Energy  

Open Energy Info (EERE)

Jersey (Utility Company) Jersey (Utility Company) Jump to: navigation, search Name Borough of Park Ridge Place New Jersey Utility Id 14472 Utility Location Yes Ownership M NERC Location RFC NERC RFC Yes RTO PJM Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Dusk to Dawn Floodlight Service MV 1000W Lighting Dusk to Dawn Floodlight Service HPS 100W Lighting Dusk to Dawn Floodlight Service HPS 150W Lighting Dusk to Dawn Floodlight Service HPS 175W Lighting Dusk to Dawn Floodlight Service HPS 250W Lighting Dusk to Dawn Floodlight Service HPS 360W Lighting Dusk to Dawn Floodlight Service HPS 400W Lighting

277

Reading Municipal Light Department - Business Lighting Rebate Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Reading Municipal Light Department - Business Lighting Rebate Reading Municipal Light Department - Business Lighting Rebate Program Reading Municipal Light Department - Business Lighting Rebate Program < Back Eligibility Agricultural Commercial Fed. Government Industrial Institutional Local Government Nonprofit Schools State Government Savings Category Appliances & Electronics Commercial Lighting Lighting Maximum Rebate Commercial Customers: $10,000 per calendar year Municipal Customers: $15,000 per calendar year Program Info State Massachusetts Program Type Utility Rebate Program Rebate Amount T-8/T-5 Lamp with Electronic Ballasts: $11 - $35/fixture Interior High Output Lamp with Electronic Ballasts: $100/fixture De-lamping: $4 - $9/lamp Lighting Sensors: $20/sensor LED Exit Signs: $20/fixture Provider Incentive Programs

278

LightWeight KerneL  

NLE Websites -- All DOE Office Websites (Extended Search)

Catamount n-Way Catamount n-Way LightWeight KerneL 1 R&D 100 Entry Catamount n-Way LightWeight KerneL 2 R&D 100 Entry Submitting organization Sandia National Laboratories PO Box 5800 Albuquerque, NM 87185-1319 USA Ron Brightwell Phone: (505) 844-2099 Fax: (505) 845-7442 rbbrigh@sandia.gov AFFIRMATION: I affirm that all information submitted as a part of, or supplemental to, this entry is a fair and accurate representation of this product. _____________________________ Ron Brightwell Joint entry Operating Systems Research 1527 16th NW #5 Washington, DC 20036 USA Trammell Hudson Phone: (240) 283-1700 Fax: (843) 971-9774 hudson@osresearch.net ProduCt name Catamount N-Way (CNW) Lightweight Kernel brief deSCriPtion CNW is an operating system that exploits existing features of multi-core processors

279

Lighting fundamentals handbook: Lighting fundamentals and principles for utility personnel  

SciTech Connect

Lighting accounts for approximately 30% of overall electricity use and demand in commercial buildings. This handbook for utility personnel provides a source of basic information on lighting principles, lighting equipment, and other considerations related to lighting design. The handbook is divided into three parts. Part One, Physics of Light, has chapters on light, vision, optics, and photometry. Part Two, Lighting Equipment and Technology, focuses on lamps, luminaires, and lighting controls. Part Three, Lighting Design Decisions, deals with the manner in which lighting design decisions are made and reviews relevant methods and issues. These include the quantity and quality of light needed for visual tasks, calculation methods for verifying that lighting needs are satisfied, lighting economics and methods for evaluating investments in efficient lighting systems, and miscellaneous design issues including energy codes, power quality, photobiology, and disposal of lighting equipment. The handbook contains a discussion of the role of the utility in promoting the use of energy-efficient lighting. The handbook also includes a lighting glossary and a list of references for additional information. This convenient and comprehensive handbook is designed to enable utility lighting personnel to assist their customers in developing high-quality, energy-efficient lighting systems. The handbook is not intended to be an up-to-date reference on lighting products and equipment.

Eley, C.; Tolen, T. (Eley (Charles) Associates, San Francisco, CA (United States)); Benya, J.R. (Luminae Souter Lighting Design, San Francisco, CA (United States))

1992-12-01T23:59:59.000Z

280

EK101 Engineering Light Project: Evaluate Residential Lighting  

E-Print Network (OSTI)

the same level of performance in the LED Lighting product solution (retrofit light bulb, ceiling lighting minute of networking ­ refreshments will be served) Thinking Differently about LED Lighting Dr. Matthew A, LEDs have emerged as the next "filament" for the lighting industry. While LEDs are not new

Bifano, Thomas

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Property:Technology Description | Open Energy Information  

Open Energy Info (EERE)

Description Description Jump to: navigation, search Property Name Technology Description Property Type Text Pages using the property "Technology Description" Showing 25 pages using this property. (previous 25) (next 25) M MHK Technologies/14 MW OTECPOWER + MINIMIZE SURFACE ACTIVITIES TO REDUCE THE CAPITAL COST AND TO IMPROVE EFFICIENCY ALTERNATE WORKING FLUIDS ARE USED FOR ENHANCED POWER EFFICIENCY IN OPTEC POWER HYBRID CYCLES ARE USED TO IMPROVE POWER AND NEED WITH SUBSEA HEAT EXCHANGERS ADVANCED SUPPORTING VESSEL CONCEPT AND FREE STANDING RISER TECHNOLOGIES TO WITH STAND HARSH OCEAN ENVIRONMENT IN DEEPWATER HAD BEEN DEVELOPED FOR THIS OPTEC POWER IT IS THE ONLY RELIABLE AND PROFITABLE RENEWABLE ENERGY SOURCE FOR THE NEED OF WORLD ENERGY FOR THE NEXT DECADE DESALINATION AND HDROGEN PRODUCTION ARE LINKED TO THE POWER GENERATION OF THE OTEC POWER FOR SEVERAL BY PRODUCTS COST EFFECTIVE PRODUCTION CLEAN ENERGY AND CLEAN WATER IS THE GOAL OF OTECPOWER INC OUR 14 MW OTEC POWER COSTS 50 MILLION USD ALL EQUIPMENT HAD BEEN DESINGED AND A FEW OF THEM ARE TESTED FOR OIL AND GAS INDUSTRY APPLICATION WHICHA RE BEING USED FOR OTECPOWER A RELIABLE AND FEASIBLE OTECPOWER IS PROPOSED

282

Description of master thesis Robotic transportation  

E-Print Network (OSTI)

Description of master thesis Robotic transportation Jan Holdgaard-Thomsen & Søren Markersen In hospitals a significant amount of resources is spent on transportation of goods, e.g. blood samples, medicine, food, and trash. Usually these transportation tasks are carried out by humans. A current research

Bolander, Thomas

283

Beth definability in expressive description logics  

Science Conference Proceedings (OSTI)

The Beth definability property, a well-known property from classical logic, is investigated in the context of description logics (DLs): if a general LTBox implicitly defines an L-concept in terms of a given signature, where L is a DL, then does there ...

Balder Ten Cate; Enrico Franconi; ?nanç Seylan

2011-07-01T23:59:59.000Z

284

Dry Ice vs. Pipette Experiment Description  

E-Print Network (OSTI)

Dry Ice vs. Pipette Experiment Description Dry ice (solid) is put into the bulb of a pipette, plastic pipette 1 ice cube sized piece of dry ice Butter knife (or some object to break dry ice) Gloves (surgical gloves will not work, they must protect hands from dry ice) Safety glasses for demonstrator

285

Latent semantic description of iconic scenes  

Science Conference Proceedings (OSTI)

It is proposed an approach for the automatic description of scenes using a LSA–like technique. The described scenes are composed by a set of elements that can be geometric forms or iconic representation of objects. Every icon is characterized by ...

Filippo Vella; Giovanni Pilato; Giorgio Vassallo; Salvatore Gaglio

2005-10-01T23:59:59.000Z

286

Lighting Group: Controls: IBECS  

NLE Websites -- All DOE Office Websites (Extended Search)

IBECS IBECS Integrated Building Environmental Communications System Objective The overall technical goal of the IBECS project is to develop an integrated building equipment communications network that will allow appropriate automation of lighting and envelope systems to increase energy efficiency, improve building performance, and enhance occupant experience in the space. This network will provide a low-cost means for occupants to control local lighting and window systems, thereby improving occupant comfort, satisfaction and performance. A related goal is to improve existing lighting control components and accelerate development of new daylighting technologies that will allow daylighting to be more extensively applied to a larger proportion of building floor space.

287

Green Light Pulse Oximeter  

DOE Patents (OSTI)

A reflectance pulse oximeter that determines oxygen saturation of hemoglobin using two sources of electromagnetic radiation in the green optical region, which provides the maximum reflectance pulsation spectrum. The use of green light allows placement of an oximetry probe at central body sites (e.g., wrist, thigh, abdomen, forehead, scalp, and back). Preferably, the two green light sources alternately emit light at 560 nm and 577 nm, respectively, which gives the biggest difference in hemoglobin extinction coefficients between deoxyhemoglobin, RHb, and oxyhemoglobin, HbO.sub.2.

Scharf, John Edward (Oldsmar, FL)

1998-11-03T23:59:59.000Z

288

White light velocity interferometer  

DOE Patents (OSTI)

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

Erskine, D.J.

1997-06-24T23:59:59.000Z

289

White light velocity interferometer  

DOE Patents (OSTI)

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s.

Erskine, David J. (Oakland, CA)

1997-01-01T23:59:59.000Z

290

White light velocity interferometer  

DOE Patents (OSTI)

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s.

Erskine, David J. (Oakland, CA)

1999-01-01T23:59:59.000Z

291

AUTOMATIC LIGHT CONTROL  

DOE Patents (OSTI)

A control system for a projection kinescope used in a facsimile scanning system and, in particular, meams for maintaining substantially constant the light emanating from the flying spot on the face of the kinescope are described. In general, the invention provides a feeler member disposed in such a position with respect to a projecting lens as to intercept a portion of the light striking the lens. Suitable circuitry in conjunction with a photomultiplier tube provides a signal proportional to the light intensity of the flying spot. The grid bias on the kinescope is controlled by this signal to maintain the intensity of the spot substantially constant.

Artzt, M.

1957-08-27T23:59:59.000Z

292

Entangled states of light  

E-Print Network (OSTI)

These notes are more or less a faithful representation of my talk at the Workshop on ``Quantum Coding and Quantum Computing'' held at the University of Virginia. As such it is an introduction for non-physicists to the topics of the quantum theory of light and entangled states of light. In particular, I discuss the photon concept and what is really entangled in an entangled state of light (it is not the photons). Moreover, I discuss an example that highlights the peculiar behavior of entanglement in an infinite-dimensional Hilbert space.

S. J. van Enk

2004-03-16T23:59:59.000Z

293

White light velocity interferometer  

DOE Patents (OSTI)

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

Erskine, D.J.

1999-06-08T23:59:59.000Z

294

City of Beresford, South Dakota (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

Beresford, South Dakota (Utility Company) Beresford, South Dakota (Utility Company) Jump to: navigation, search Name City of Beresford Place South Dakota Utility Id 1601 Utility Location Yes Ownership M NERC Location MRO NERC MRO Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Dusk to Dawn Lighting Service- (1000W Lamp) Lighting Dusk to Dawn Lighting Service- (100W Lamp) Lighting Dusk to Dawn Lighting Service- (150W Lamp) Lighting Dusk to Dawn Lighting Service- (250W Lamp) Lighting Dusk to Dawn Lighting Service- (400W Lamp) Lighting Dusk to Dawn Lighting Service- (70W Lamp) Lighting

295

Lighting Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Basics Lighting Basics Lighting Basics August 15, 2013 - 5:12pm Addthis Text Version There are many different types of artificial lights, all of which have different applications and uses. Types of lighting include: Fluorescent Lighting High-intensity Discharge Lighting Incandescent Lighting LED Lighting Low-pressure Sodium Lighting. Which type is best depends on the application. See the chart below for a comparison of lighting types. Lighting Comparison Chart Lighting Type Efficacy (lumens/watt) Lifetime (hours) Color Rendition Index (CRI) Color Temperature (K) Indoors/Outdoors Fluorescent Straight Tube 30-110 7000-24,000 50-90 (fair to good) 2700-6500 (warm to cold) Indoors/outdoors Compact Fluorescent 50-70 10,000 65-88 (good) 2700-6500 (warm to cold) Indoors/outdoors

296

Lighting Renovations | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Renovations Lighting Renovations Lighting Renovations October 16, 2013 - 4:54pm Addthis When undertaking a lighting renovation in a Federal building, daylighting is the primary renewable energy opportunity. Photovoltaics (PV) also present an excellent opportunity. While this guide focuses on the renewable energy opportunities, energy efficiency may also present amble opportunity for energy and cost savings. Renewable Energy Options for Lighting Renovations Daylighting Photovoltaics Daylighting Daylighting maximizes the use of natural light in a space to reduce the need for artificial lighting. Incorporating daylighting into a lighting strategy should occur during the planning stage of design since it affects all aspects. Ambient light dimming controls are critical in daylighting, since the

297

Peninsula Light Company - Commercial Efficient Lighting Rebate Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Peninsula Light Company - Commercial Efficient Lighting Rebate Peninsula Light Company - Commercial Efficient Lighting Rebate Program Peninsula Light Company - Commercial Efficient Lighting Rebate Program < Back Eligibility Commercial Savings Category Appliances & Electronics Commercial Lighting Lighting Program Info State District of Columbia Program Type Utility Rebate Program Rebate Amount General: 30% - 70% of cost Provider Peninsula Light Company Peninsula Light Company (PLC) offers a rebate program for commercial customers who wish to upgrade to energy efficient lighting. Participating customers must be served by PLC commercial service. Customers who upgrade to highly efficient fixtures and systems are eligible to receive a rebate generally covering 30% - 70% of the project cost. These retrofits improve light quality and reduce energy costs in participating facilities. PLC

298

Solid-State Lighting: 2013 Solid-State Lighting Manufacturing...  

NLE Websites -- All DOE Office Websites (Extended Search)

2013 Solid-State Lighting Manufacturing R&D Workshop Presentations and Materials to someone by E-mail Share Solid-State Lighting: 2013 Solid-State Lighting Manufacturing R&D...

299

Lots of Light Literature  

NLE Websites -- All DOE Office Websites (Extended Search)

Lots of Light Literature Lots of Light Literature The Teacher Resource Center contains a great variety of resources for all areas of science K-12. For the concepts of light here is a sampling of some of these resources. Science is Elementary - Spring 1995, vol. 6, no. 4. Science is Elementary is produced by the Museum Institute for Teaching Science, 79 Milk Street, Suite 210, Boston, MA 02109-3903. Science is Elementary is a newsletter we have admired for years. The topic of this issue deals with Color and Light. It contains content information to the teacher, trade secrets or teaching tips, "Book Looking" section and the section call "Sciencing" which includes a variety of activities. Science is Elementary is published quarterly. Subscription cost is: $22.00/year.

300

Slow-light solitons  

E-Print Network (OSTI)

A new type of soliton with controllable speed is constructed generalizing the theory of slow-light propagation to an integrable regime of nonlinear dynamics. The scheme would allow the quantum-information transfer between optical solitons and atomic media.

Ulf Leonhardt

2004-08-06T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Light Vector Mesons  

E-Print Network (OSTI)

This article reviews the current status of experimental results obtained in the measurement of light vector mesons produced in proton-proton and heavy ion collisions at different energies. The review is focused on two phenomena related to the light vector mesons; the modification of the spectral shape in search of Chiral symmetry restoration and suppression of the meson production in heavy ion collisions. The experimental results show that the spectral shape of light vector mesons are modified compared to the parameters measured in vacuum. The nature and the magnitude of the modification depends on the energy density of the media in which they are produced. The suppression patterns of light vector mesons are different from the measurements of other mesons and baryons. The mechanisms responsible for the suppression of the mesons are not yet understood. Systematic comparison of existing experimental results points to the missing data which may help to resolve the problem.

Alexander Milov

2008-09-23T23:59:59.000Z

302

Light Duty Vehicle Pathways  

NLE Websites -- All DOE Office Websites (Extended Search)

in 2030 0 5 10 15 20 25 30 Million BarrelsDay IMPORTS DOMESTIC OIL SUPPLY OIL DEMAND ELECTRICITY RES. & COM. INDUSTRY MISC. TRANSPORT AIR TRUCKS LIGHT DUTY VEHICLES ETHANOL...

303

General Light Metals  

Science Conference Proceedings (OSTI)

Mar 3, 2011 ... A detailed literature survey indicates that vacuum sintering is able to produce ... In recent years, there is a high demand for light-weight metals foams. ... Each powder mixture's composition is determined by response surface ...

304

Energy Basics: Fluorescent Lighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Fluorescent Lighting Fluorescent lamps use 25%-35% of the energy used by incandescent lamps to provide the same amount of illumination (efficacy of 30-110 lumens per watt). They...

305

Energy Basics: LED Lighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

positivenegative junction of the diode, the electrons slow down to orbit at a lower energy level. The electrons emit the excess energy as photons of light. LEDs are often used...

306

Advancing lighting and daylighting simulation: The transition from analysis to design aid tools  

SciTech Connect

This paper explores three significant software development requirements for making the transition from stand-alone lighting simulation/analysis tools to simulation-based design aid tools. These requirements include specialized lighting simulation engines, facilitated methods for creating detailed simulatable building descriptions, an automated techniques for providing lighting design guidance. Initial computer implementations meant to address each of these requirements are discussed to further elaborate these requirements and to illustrate work-in-progress.

Hitchcock, R.J.

1995-05-01T23:59:59.000Z

307

Practical image based lighting  

E-Print Network (OSTI)

In this thesis, we present a user-friendly and practical method for seamless integration of computer-generated images (CG) with real photographs and video. In general such seamless integration is extremely hard and requires recovery of real world information to simulate the same environment for both CG and real objects. This real world information includes camera positions and parameters, and shapes, material properties, and motion of real objects. Among these one of the most important real world information is lighting. Image based lighting that is developed to recover illumination information of the real world from photographs has recently been popular in computer graphics. In this thesis we present a practical image based lighting method. Our method is based on a simple and easily constructible device: a square plate with a cylindrical stick. We have developed a user-guided system to approximately recover illumination information (i.e. orientations, colors, and intensities of light sources) from a photograph of this device. Our approach also helps to recover surface colors of real objects based on reconstructed lighting information. In addition, we will address our observation on shadows with multi-color lights in a compositing aspect and will present a solution to handle the addressed issue.

Lee, Jaemin

2003-01-01T23:59:59.000Z

308

Light-induced first-order orientational transitions in a nematic liquid crystal in the presence of an ordinary wave  

SciTech Connect

The effects of light-induced reorientation of the director of a nematic liquid crystal doped with dendrimer are investigated experimentally. The influence of light polarisation on the firstorder orientational transition that occurs with changing the light beam power is studied. An irreversible first-order orientational transition when changing the polarisation of light is discovered and examined. A theoretical description of the observed effects is presented.

Zolot'ko, A S; Smaev, Mikhail P; Shvetsov, S A; Boiko, N I; Barnik, M I

2012-04-30T23:59:59.000Z

309

Commercial Lighting and LED Lighting Incentives (Vermont) | Open...  

Open Energy Info (EERE)

form History Share this page on Facebook icon Twitter icon Commercial Lighting and LED Lighting Incentives (Vermont) This is the approved revision of this page, as well as...

310

Solid-State Lighting: Solid-State Lighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Lighting Search Search Help Solid-State Lighting HOME ABOUT THE PROGRAM R&D PROJECTS MARKET-BASED PROGRAMS SSL BASICS INFORMATION RESOURCES FINANCIAL OPPORTUNITIES EERE...

311

Solid-State Lighting: Residential Lighting End-Use Consumption  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting End-Use Consumption Study aims to improve the understanding of lighting energy usage in U.S. residential dwellings using a regional estimation framework. The...

312

Columbia Water & Light- HVAC and Lighting Efficiency Rebates  

Energy.gov (U.S. Department of Energy (DOE))

Columbia Water & Light (CWL) offers rebates to its commercial and industrial customers for the purchase of high efficiency HVAC installations and efficient lighting. Incentives for certain...

313

Towards a poetics of light : the conceits of light.  

E-Print Network (OSTI)

??Towards a Poetics of Light; The Conceits of Light is a critical quest to map associations between rhetorical figures, psychological defences and spatial tropes in… (more)

Evans, M

2006-01-01T23:59:59.000Z

314

Types of Lighting in Commercial Buildings - Lighting Characteristics  

U.S. Energy Information Administration (EIA) Indexed Site

U.S. Lighting Market Characterization, Vol. 1: National Lighting Inventory and Energy Consumption Estimate, Office of Energy Efficiency and Renewable Energy,...

315

Data:Bdee6210-0219-4cc0-8fe3-8ab2ee802b63 | Open Energy Information  

Open Energy Info (EERE)

Bdee6210-0219-4cc0-8fe3-8ab2ee802b63 Bdee6210-0219-4cc0-8fe3-8ab2ee802b63 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Northern Indiana Pub Serv Co Effective date: 2011/12/27 End date if known: Rate name: Dusk to Dawn Light - 400 watt HPS - Floodlight Sector: Lighting Description: TO WHOM AVAILABLE Available for dusk to dawn area lighting service to Customers for Company-owned lighting systems located on electric supply lines of the Company which are suitable and adequate for supplying the service requested, subject to the conditions set forth in this Rate Schedule and the Company Rules.

316

Data:8afd9aa1-538e-409b-b702-95fd1ae300dd | Open Energy Information  

Open Energy Info (EERE)

afd9aa1-538e-409b-b702-95fd1ae300dd afd9aa1-538e-409b-b702-95fd1ae300dd No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Salmon River Electric Coop Inc Effective date: 2009/12/16 End date if known: Rate name: Dusk to Dawn Lighting (Street Light) Service (Less than 200 Watt) Sector: Lighting Description: Service under this schedule is applicable to electric service provided for the outdoor dusk to dawn lighting of commercial, industrial, and residential member grounds, yards, driveways, and premises by means of a Cooperative-owned luminary, mounted on an existing Cooperative pole with a support bracket, automatically controlled by a photoelectric relay.

317

Data:7a3e260b-d80d-4b3d-932a-4d69d206565d | Open Energy Information  

Open Energy Info (EERE)

60b-d80d-4b3d-932a-4d69d206565d 60b-d80d-4b3d-932a-4d69d206565d No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Salmon River Electric Coop Inc Effective date: 2009/12/16 End date if known: Rate name: Dusk to Dawn Lighting (Street Light) Service (200-400W) Sector: Lighting Description: Service under this schedule is applicable to electric service provided for the outdoor dusk to dawn lighting of commercial, industrial, and residential member grounds, yards, driveways, and premises by means of a Cooperative-owned luminary, mounted on an existing Cooperative pole with a support bracket, automatically controlled by a photoelectric relay.

318

Reasoning with rough description logics: An approximate concepts approach  

Science Conference Proceedings (OSTI)

The current research progress and the existing problems of uncertain or imprecise knowledge representation and reasoning in description logics are analyzed in this paper. Approximate concepts are introduced to description logics based on rough set theory, ... Keywords: Approximate concepts, Concepts, Description logics, Rough description logics, Rough set theory

Yuncheng Jiang; Ju Wang; Suqin Tang; Bao Xiao

2009-02-01T23:59:59.000Z

319

Standard-C hydrogen monitoring system, system design description  

DOE Green Energy (OSTI)

Standard-C cabinet arrangement system design description for the Standard Hydrogen Monitoring System.

Schneider, T.C., Westinghouse Hanford

1996-08-29T23:59:59.000Z

320

Lighting Design | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Design Lighting Design July 29, 2012 - 6:28pm Addthis Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of ©iStockphoto.com/chandlerphoto. Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of ©iStockphoto.com/chandlerphoto. How does it work? Buy ENERGY STAR-rated lighting for the highest quality, energy-efficient lighting. Use timers and other controls to turn lights on and off. Use outdoor solar lighting. Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. If you're constructing a new house, consider lighting as part of your whole-house design -- an

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

LED Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LED Lighting LED Lighting LED Lighting July 29, 2012 - 4:43pm Addthis LED Lighting What are the key facts? Quality LED products can last 25 times longer than an incandescent bulb and use 75% less energy. LEDs are directional, focusing light in ways that are useful in homes and commercial settings. The light-emitting diode (LED) is one of today's most energy-efficient and rapidly-developing lighting technologies. Quality LED light bulbs last longer, are more durable, and offer comparable or better light quality than other types of lighting. Check out the top 8 things about LEDs to learn more. Energy Savings LED is a highly energy efficient lighting technology, and has the potential to fundamentally change the future of lighting in the United States. Residential LEDs -- especially ENERGY STAR rated products -- use at least

322

Low-Pressure Sodium Lighting  

Energy.gov (U.S. Department of Energy (DOE))

Low-pressure sodium lighting provides more energy-efficient outdoor lighting than high-intensity discharge lighting, but it has very poor color rendition. Typical applications include highway and...

323

Materials for solid state lighting  

E-Print Network (OSTI)

in the Proceedings. Materials for Solid State Lighting S.G.Johnson Lighting Research Group Building TechnologiesMaterials for Solid State Lighting S.G. Johnson 1 and J. A.

Johnson, S.G.; Simmons, J.A.

2002-01-01T23:59:59.000Z

324

Light as a Healing Mechanism  

E-Print Network (OSTI)

S. (1991). Meridians conduct light. Moskow: Raum and Zeit.the bod’ys absorption of light. Explore, 9(2), doi: https://01). The healing use of light and color. Health Care Design

Lingampalli, Nithya

2013-01-01T23:59:59.000Z

325

Description of Energy Intensity Tables (12)  

U.S. Energy Information Administration (EIA) Indexed Site

3. Description of Energy Intensity Data Tables 3. Description of Energy Intensity Data Tables There are 12 data tables used as references for this report. Specifically, these tables are categorized as tables 1 and 2 present unadjusted energy-intensity ratios for Offsite-Produced Energy and Total Inputs of Energy for 1985, 1988, 1991, and 1994; along with the percentage changes between 1985 and the three subsequent years (1988, 1991, and 1994) tables 3 and 4 present 1988, 1991, and 1994 energy-intensity ratios that have been adjusted to the mix of products shipped from manufacturing establishments in 1985 tables 5 and 6 present unadjusted energy-intensity ratios for Offsite-Produced Energy and Total Inputs of Energy for 1988, 1991, and 1994; along with the percentage changes between 1988 and the two subsequent

326

Light diffusing fiber optic chamber  

DOE Patents (OSTI)

A light diffusion system for transmitting light to a target area. The light is transmitted in a direction from a proximal end to a distal end by an optical fiber. A diffusing chamber is operatively connected to the optical fiber for transmitting the light from the proximal end to the distal end and transmitting said light to said target area. A plug is operatively connected to the diffusing chamber for increasing the light that is transmitted to the target area.

Maitland, Duncan J. (Lafayette, CA)

2002-01-01T23:59:59.000Z

327

Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Los Angeles, CA to someone Los Angeles, CA to someone by E-mail Share Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Facebook Tweet about Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Twitter Bookmark Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Google Bookmark Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Delicious Rank Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Digg Find More places to share Solid-State Lighting: Municipal Consortium

328

Functional Description for UTWorkstation 5.0  

Science Conference Proceedings (OSTI)

This report, a "Functional Description" or "FD", describes improvements for the EPRI Underground Transmission Workstation (UTW) to make the programs in the workstation more useful and easier to use. The information described in this report is based on a survey and meeting of member utility advisors that provided comments on desirable features, errors ("bugs") and other changes that should be made based upon their current needs at their respective utilities. In addition to describing software changes, the...

2005-09-30T23:59:59.000Z

329

Energy Star Lighting Verification Program (Program for the Evaluation and Analysis of Residential Lighting)  

SciTech Connect

The Program for the Evaluation and Analysis of Residential Lighting (PEARL) is a watchdog program. It was created in response to complaints received by utility program managers about the performance of certain Energy Star lighting products being promoted within their service territories and the lack of a self-policing mechanism within the lighting industry that would ensure the reliability of these products and their compliance with ENERGY STAR specifications. To remedy these problems, PEARL purchases and tests products that are available to the consumers in the marketplace. The Lighting Research Center (LRC) tests the selected products against the corresponding Energy Star specifications. This report includes the experimental procedure and data results of Cycle Three of PEARL program during the period of October 2002 to April 2003, along with the description of apparatus used, equipment calibration process, experimental methodology, and research findings from the testing. The products tested are 20 models of screw-based compact fluorescent lamps (CFL) of various types and various wattages made or marketed by 12 different manufacturers, and ten models of residential lighting fixtures from eight different manufacturers.

Conan O'Rourke; Yutao Zhou

2006-03-01T23:59:59.000Z

330

Physics Out Loud - Cerenkov Light  

NLE Websites -- All DOE Office Websites (Extended Search)

Baryon Previous Video (Baryon) Physics Out Loud Main Index Next Video (Cross Section) Cross Section Cerenkov Light The bright blue glow from nuclear reactors is Cerenkov light....

331

Flash Lighting with Fluorescent Lamp.  

E-Print Network (OSTI)

??A flash lighting circuit with the fluorescent lamp is designed to produce lighting flicker by means of controlling the operating frequency and the duty-ratio of… (more)

Hsieh, Horng

2005-01-01T23:59:59.000Z

332

Virginia Tech Electric Lighting Report  

NLE Websites -- All DOE Office Websites (Extended Search)

LIGHTING Daylight and Electric Careful consideration has been given to the integration of daylight, electric light, and the consequences relative to energy conservation, spatial...

333

Science Afternoon Properties of Light  

Science Conference Proceedings (OSTI)

... Science Afternoon. Properties of Light. ... We discovered that there was a lot to learn about the Properties of Light! Supplemental Materials. ...

2012-04-25T23:59:59.000Z

334

Light pipe - design for efficiency  

Science Conference Proceedings (OSTI)

The high cost and availability of materials which are clear enough to transmit light without absorption has limited the idea of piping large-scale quantities of light. The light pipe uses the principle of Total Internal Reflection, with the light guided by very accurate prisms. The transmission of light directed into the end of a Light Pipe at an angle of less than 27.6 degrees is theoretically 100% efficient. The author describes its uses and advantages for lighting offices, cold storage areas, difficult access and hazardous areas, and for solar lighting. Future directions will be to improve the economics and accuracy of the technology. 4 references, 2 figures.

Hockey, S.N.

1985-08-01T23:59:59.000Z

335

Artificial light and plant growth  

NLE Websites -- All DOE Office Websites (Extended Search)

Artificial light and plant growth Name: Lim Age: NA Location: NA Country: NA Date: NA Question: What color of artificial light works the best in plant growth? Replies:...

336

Lighting Controls | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

fluorescent lighting fixtures rather than replace them. Dimmers and LEDs Some light-emitting diode (LED) lightbulbs can be used with dimmers. LED bulbs and fixtures must be...

337

Physics Out Loud - Cherenkov Light  

NLE Websites -- All DOE Office Websites (Extended Search)

Baryon Previous Video (Baryon) Physics Out Loud Main Index Next Video (Cross Section) Cross Section Cherenkov Light The bright blue glow from nuclear reactors is Cherenkov light....

338

Light Field Appearance Manifolds  

E-Print Network (OSTI)

Abstract. Statistical shape and texture appearance models are powerful image representations, but previously had been restricted to 2D or 3D shapes with smooth surfaces and lambertian reflectance. In this paper we present a novel 3D appearance model using image-based rendering techniques, which can represent complex lighting conditions, structures, and surfaces. We construct a light field manifold capturing the multi-view appearance of an object class and extend the direct search algorithm of Cootes and Taylor to match new light fields or 2D images of an object to a point on this manifold. When matching to a 2D image the reconstructed light field can be used to render unseen views of the object. Our technique differs from previous view-based active appearance models in that model coefficients between views are explicitly linked, and that we do not model any pose variation within the shape model at a single view. It overcomes the limitations of polygonal based appearance models and uses light fields that are acquired in real-time. 1

Chris Mario Christoudias; Trevor Darrell

2004-01-01T23:59:59.000Z

339

Browse wiki | Open Energy Information  

Open Energy Info (EERE)

to dawn lighting servi ... Applicable for dusk to dawn lighting service by means of ballast operated lamp fixtures on a suitable wood pole. The service includes all electrical...

340

Lighting and Surfaces 11.1 Introduction to Lighting  

E-Print Network (OSTI)

-object-at-a-time. "Intrinsic" light is the light emitted by the object itself, such as the glow from a TV screen, a light-emitting diode, or a star. "Ambient" light is an illumination that seems to come from all sides. In the real

Boyd, John P.

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

National Synchrotron Light Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Environmental Assessment Environmental Assessment Proposed Upgrade and Improvement of the National Synchrotron Light Source Complex at Brookhaven National Laboratory, Upton, New York This Environmental Assessment addresses the proposed action by the U.S. Department of Energy to upgrade the facilities of the National Synchrotron Light Source Complex, namely the National Synchrotron Light Source (NSLS), the Accelerator Test Facility and the Source Development Laboratory. The environmental effects of a No-Action Alternative as well as a Proposed Action are evaluated in the Environmental Assessment. The “NSLS Environmental Assessment Fact Sheet” link below leads to a one-page summary of the Environmental Assessment. The “NSLS Environmental Assessment” link below leads to the whole 41-page

342

Lighting Technology Panel  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Panel Technology Panel Federal Utility Partnership Working Group N b 2009 November 1 1 8, 2009 Doug Avery Southern California Edison Southern California Edison National Energy Conservation M d t Mandates * There are Federal and State Mandates to reduce energy consumption - California Investor Owned Electric Utilities are ordered to save around 3 Billion kWh's each y year from 2007-2113 - Federal buildings ordered to reduce electrical Federal buildings ordered to reduce electrical energy consumption 35% by 2012 Energy Consump ption gy Lighting accounts for 42 7% of energy consumption Lighting accounts for 42.7% of energy consumption Data Courtesy of SDG&E Data Courtesy of SDG&E Energy Consump ption gy More than ¾ of the lighting load is non-residential. Data Courtesy of SDG&E

343

Pupillary efficient lighting system  

DOE Patents (OSTI)

A lighting system having at least two independent lighting subsystems each with a different ratio of scotopic illumination to photopic illumination. The radiant energy in the visible region of the spectrum of the lighting subsystems can be adjusted relative to each other so that the total scotopic illumination of the combined system and the total photopic illumination of the combined system can be varied independently. The dilation or contraction of the pupil of an eye is controlled by the level of scotopic illumination and because the scotopic and photopic illumination can be separately controlled, the system allows the pupil size to be varied independently of the level of photopic illumination. Hence, the vision process can be improved for a given level of photopic illumination. 5 figs.

Berman, S.M.; Jewett, D.L.

1989-04-14T23:59:59.000Z

344

Pupillary efficient lighting system  

DOE Patents (OSTI)

A lighting system having at least two independent lighting subsystems each with a different ratio of scotopic illumination to photopic illumination. The radiant energy in the visible region of the spectrum of the lighting subsystems can be adjusted relative to each other so that the total scotopic illumination of the combined system and the total photopic illumination of the combined system can be varied independently. The dilation or contraction of the pupil of an eye is controlled by the level of scotopic illumination and because the scotopic and photopic illumination can be separately controlled, the system allows the pupil size to be varied independently of the level of photopic illumination. Hence, the vision process can be improved for a given level of photopic illumination.

Berman, Samuel M. (San Francisco, CA); Jewett, Don L. (Mill Valley, CA)

1991-01-01T23:59:59.000Z

345

Light harvesting arrays  

DOE Patents (OSTI)

A light harvesting array useful for the manufacture of devices such as solar cells comprises: (a) a first substrate comprising a first electrode; and (b) a layer of light harvesting rods electrically coupled to the first electrode, each of the light harvesting rods comprising a polymer of Formula I: X.sup.1.paren open-st.X.sup.m+1).sub.m (I) wherein m is at least 1, and may be from two, three or four to 20 or more; X.sup.1 is a charge separation group (and preferably a porphyrinic macrocycle, which may be one ligand of a double-decker sandwich compound) having an excited-state of energy equal to or lower than that of X.sup.2, and X.sup.2 through X.sup.m+1 are chromophores (and again are preferably porphyrinic macrocycles).

Lindsey, Jonathan S. (Raleigh, NC)

2002-01-01T23:59:59.000Z

346

Computer program for determining the thermodynamic properties of light hydrocarbons  

DOE Green Energy (OSTI)

This program was written to be used as a subroutine. The program determines the thermodynamics of light hydrocarbons. The following light hydrocarbons can be analyzed: butane, ethane, ethylene, heptane, hexane, isobutane, isopentane, methane, octane, pentane, propane and propylene. The subroutine can evaluate a thermodynamic state for the light hydrocarbons given any of the following pairs of state quantities: pressure and quality, pressure and enthalpy, pressure and entropy, temperature and pressure, temperature and quality and temperature and specific volume. These six pairs of knowns allow the user to analyze any thermodynamic cycle utilizing a light hydrocarbon as the working fluid. The Starling--Benedict--Webb--Rubin equation of state was used. A brief description, flowchart, listing and required equations for each subroutine are included.

Riemer, D.H.; Jacobs, H.R.; Boehm, R.F.; Cook, D.S.

1976-01-01T23:59:59.000Z

347

Computer program for determining the thermodynamic properties of light hydrocarbons  

DOE Green Energy (OSTI)

This program was written to be used as a subroutine. The program determines the thermodynamics of light hydrocarbons. The following light hydrocarbons can be analyzed: butane, ethane, ethylene, heptane, hexane, isobutane, isopentane, methane, octane, pentane, propane and propylene. The subroutine can evaluate a thermodynamic state for the light hydrocarbons given any of the following pairs of state quantities: pressure and quality, pressure and enthalpy, pressure and entropy, temperature and pressure, temperature and quality and temperature and specific volume. These six pairs of knowns allow the user to analyze any thermodynamic cycle utilizing a light hydrocarbon as the working fluid. The Starling-Benedict-Webb-Rubin equation of state was used. This report contains a brief description, flowchart, listing and required equations for each subroutine.

Riemer, D.H.; Jacobs, H.R.; Boehm, R.F.; Cook, D.S.

1976-07-01T23:59:59.000Z

348

DOE Hydrogen Analysis Repository: Biofuels in Light-Duty Vehicles  

NLE Websites -- All DOE Office Websites (Extended Search)

Biofuels in Light-Duty Vehicles Biofuels in Light-Duty Vehicles Project Summary Full Title: Mobility Chains Analysis of Technologies for Passenger Cars and Light-Duty Vehicles Fueled with Biofuels: Application of the GREET Model to the Role of Biomass in America's Energy Future (RBAEF) Project Project ID: 82 Principal Investigator: Michael Wang Brief Description: The mobility chains analysis estimated the energy consumption and emissions associated with the use of various biofuels in light-duty vehicles. Keywords: Well-to-wheels (WTW); ethanol; biofuels; Fischer Tropsch diesel; hybrid electric vehicles (HEV) Purpose The project was a multi-organization, multi-sponsor project to examine the potential of biofuels in the U.S. Argonne was responsible for the well-to-wheels analysis of biofuel production and use.

349

Heavy-to-light form factors on the light cone  

E-Print Network (OSTI)

The light cone method provides a convenient non-perturbative tool to study the heavy-to-light form factors. We construct a light cone quark model utilizing the soft collinear effective theory. In the leading order of effective theory, the ten $B$ to light physical form factors are reduced to three universal form factors which can be calculated as overlaps of hadron light front wave functions in the light cone quark model. The numerical results show that the leading contribution is close to the results from other approaches. The $q^2$ dependence of the heavy-to-light form factors are also presented.

Cai-Dian Lu; Wei Wang; Zheng-Tao Wei

2007-01-31T23:59:59.000Z

350

TOPIC Brief BUILDING TECHNOLOGIES PROGRAM Lighting: Residential...  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting: Residential and Commercial Requirements TOPIC BRIEF 1 Lighting: Residential and Commercial Requirements Residential Lighting Requirements The 2009 International Energy...

351

Deficiencies of Lighting Codes and Ordinances in Controlling Light Pollution from Parking Lot Lighting Installations.  

E-Print Network (OSTI)

??The purpose of this research was to identify the main causes of light pollution from parking lot electric lighting installations and highlight the deficiencies of… (more)

Royal, Emily

2012-01-01T23:59:59.000Z

352

Radioluminescent lighting technology  

SciTech Connect

The glow-in-the-dark stereotype that characterizes the popular image of nuclear materials is not accidental. When the French scientist, Henri Becquerel, first discovered radioactivity in 1896, he was interested in luminescence. Radioluminescence, the production of light from a mixture of energetic and passive materials, is probably the oldest practical application of the unstable nucleus. Tritium-based radioluminescent lighting, in spite of the biologically favorable character of the gaseous tritium isotope, was included in the general tightening of environmental and safety regulations. Tritium light manufacturers would have to meet two fundamental conditions: (1) The benefit clearly outweighed the risk, to the extent that even the perceived risk of a skeptical public would be overcome. (2) The need was significant enough that the customer/user would be willing and able to afford the cost of regulation that was imposed both in the manufacture, use and eventual disposal of nuclear materials. In 1981, researchers at Oak Ridge National Laboratory were investigating larger radioluminescent applications using byproduct nuclear material such as krypton-85, as well as tritium. By 1982, it appeared that large source, (100 Curies or more) tritium gas tube, lights might be useful for marking runways and drop zones for military operations and perhaps even special civilian aviation applications. The successful development of this idea depended on making the light bright enough and demonstrating that large gas tube sources could be used and maintained safely in the environment. This successful DOE program is now in the process of being completed and closed-out. Working closely with the tritium light industry, State governments and other Federal agencies, the basic program goals have been achieved. This is a detailed report of what they have learned, proven, and discovered. 91 refs., 29 figs., 5 tabs. (JF)

1990-01-01T23:59:59.000Z

353

Wisconsin Business Sheds Light on Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wisconsin Business Sheds Light on Lighting Wisconsin Business Sheds Light on Lighting Wisconsin Business Sheds Light on Lighting April 29, 2010 - 4:59pm Addthis When this photograph was taken, the upper floors of Wisconsin’s Department of Transportation were using a new lighting plan from EPS, while the lower ones were still using the pre-audit lighting scheme. | Photo Courtesy of Energy Performance Specialists, LLC When this photograph was taken, the upper floors of Wisconsin's Department of Transportation were using a new lighting plan from EPS, while the lower ones were still using the pre-audit lighting scheme. | Photo Courtesy of Energy Performance Specialists, LLC Joshua DeLung Wisconsin-based Energy Performance Specialists LLC is helping clients reduce energy consumption in a very simple way-by just using less.

354

July 18, 2012 Using QECBs for Street Lighting Upgrades  

E-Print Network (OSTI)

lighting technologies (e.g. light-emitting diodes, induction lighting) can reduce street light energy

355

Fiberoptic home lighting  

Science Conference Proceedings (OSTI)

Initial effort on this grant project was to construct a model that would demonstrate the feasibility of various lighting theories. Testing of suitable materials for utilization as fibreoptic components was the second priority. The material chosen for the project was 5/8 inch diameter plexiglas rod. The next step involved determining the limitations and other properties of the plexiglas rod. The final factor in developing a useable system involved testing different types and colors of light and their ability to be transmitted by the optic fibre. The culmination of the research and testing resulted in the demonstration projects.

Keleher, D.

1982-01-01T23:59:59.000Z

356

Light Logger Placement Guidelines for Residential Lighting Studies  

Science Conference Proceedings (OSTI)

New technological advancements in lighting have increased the efficiency of residential lighting loads. Light loggers, which use a photocell to sense when lights are on or off, provide valuable metering information for use in measuring technology effectiveness and designing marketing programs. Placement of the loggers is critical to the accuracy and reliability of the measurements. This report provides placement recommendations for various types of lighting, expected accuracy compared to metered energy, ...

1996-03-28T23:59:59.000Z

357

Energy 101: Lighting Choices | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Choices Energy 101: Lighting Choices Addthis Below is the text version for the Energy 101: Lighting Choices video: The video opens with "Energy 101: Lighting Choices."...

358

Solid-State Lighting: OLED Basics  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting: OLED Basics on Twitter Bookmark Solid-State Lighting: OLED Basics on Google Bookmark Solid-State Lighting: OLED Basics on Delicious Rank Solid-State Lighting:...

359

Lighting Principles and Terms | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Principles and Terms Lighting Principles and Terms July 29, 2012 - 5:20pm Addthis Light quantity, energy consumption, and light quality are the basic principles of lighting. |...

360

Good lighting with energy conservation  

SciTech Connect

The publicity and economic impact of the oil embargo of 1973-74 has frequently caused over-reactive, indiscriminate reductions in lighting without eliminating many of the truly energy-wasteful aspects of lighting system usage. With current technology and a clear knowledge of the lighting requirements significant contributions to energy conservation can be achieved without unnecessarily sacrificing the benefits of good lighting.

Clark, G.W.

1976-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Shell model description of zirconium isotopes  

Science Conference Proceedings (OSTI)

We calculate the low-lying spectra and several high-spin states of zirconium isotopes (Z=40) with neutron numbers from N=50 to N=58 using a large valence space with the {sup 78}Ni inert core, which a priori allows one to study the interplay between spherical and deformed configurations, necessary for the description of nuclides in this part of the nuclear chart. The effective interaction is derived by monopole corrections of the realistic G matrix. We reproduce essential nuclear properties, such as subshell closures in {sup 96}Zr and {sup 98}Zr. The spherical-to-deformed shape transition in {sup 100}Zr is addressed as well.

Sieja, K. [GSI-Helmholtzzentrum fuer Schwerionenforschung mbH., Planckstrasse 1, D-64-220 Darmstadt (Germany); Institut fuer Kernphysik, Technische Universitaet Darmstadt, D-64289 Darmstadt (Germany); Nowacki, F. [Institute Pluridisciplinaire Hubert Curien, 23 rue du Loess, Strasbourg (France); Langanke, K. [Institut fuer Kernphysik, Technische Universitaet Darmstadt, D-64289 Darmstadt (Germany); Frankfurt Institute for Advanced Studies, D-60438 Frankfurt am Main (Germany); Martinez-Pinedo, G. [GSI-Helmholtzzentrum fuer Schwerionenforschung mbH., Planckstrasse 1, D-64-220 Darmstadt (Germany)

2009-06-15T23:59:59.000Z

362

System design description PFP thermal stabilization  

SciTech Connect

The purpose of this document is to provide a system design description and design basis for the Plutonium Finishing P1ant (PFP) Thermal Stabilization project. The sources of material for this project are residues scraped from glovebox floors and materials already stored in vault storage that need further stabilizing to meet the 3013 storage requirements. Stabilizing this material will promote long term storage and reduced worker exposure. This document addresses: function design, equipment, and safety requirements for thermal stabilization of plutonium residues and oxides.

RISENMAY, H.R.

1998-11-10T23:59:59.000Z

363

Hamiltonian description of the ideal fluid  

SciTech Connect

Fluid mechanics is examined from a Hamiltonian perspective. The Hamiltonian point of view provides a unifying framework; by understanding the Hamiltonian perspective, one knows in advance (within bounds) what answers to expect and what kinds of procedures can be performed. The material is organized into five lectures, on the following topics: rudiments of few-degree-of-freedom Hamiltonian systems illustrated by passive advection in two-dimensional fluids; functional differentiation, two action principles of mechanics, and the action principle and canonical Hamiltonian description of the ideal fluid; noncanonical Hamiltonian dynamics with examples; tutorial on Lie groups and algebras, reduction-realization, and Clebsch variables; and stability and Hamiltonian systems.

Morrison, P.J.

1994-01-01T23:59:59.000Z

364

A correspondence between temporal description logics  

E-Print Network (OSTI)

ABSTRACT. In this paper, we investigate the relationship between two decidable interval-based temporal description logics that have been proposed in the literature, T L-ALCF and ALCF(A). Although many aspects of these two logics are quite similar, the two logics suggest two rather different paradigms for representing temporal conceptual knowledge. In this paper, we exhibit a reduction from T L-ALCF concepts to ALCF(A) concepts that serves two purposes: first, it nicely illustrates the relationship between the two knowledge representation paradigms; and second, it provides a tight PSPACE upper bound for T L-ALCF concept satisfiabiliy, whose complexity was previously unknown.

Ro Artale; Carsten Lutz; Tu Dresden (germany

1999-01-01T23:59:59.000Z

365

Windows and lighting program  

SciTech Connect

More than 30% of all energy use in buildings is attributable to two sources: windows and lighting. Together they account for annual consumer energy expenditures of more than $50 billion. Each affects not only energy use by other major building systems, but also comfort and productivity -- factors that influence building economics far more than does direct energy consumption alone. Windows play a unique role in the building envelope, physically separating the conditioned space from the world outside without sacrificing vital visual contact. Throughout the indoor environment, lighting systems facilitate a variety of tasks associated with a wide range of visual requirements while defining the luminous qualities of the indoor environment. Windows and lighting are thus essential components of any comprehensive building science program. Despite important achievements in reducing building energy consumption over the past decade, significant additional savings are still possible. These will come from two complementary strategies: (1) improve building designs so that they effectively apply existing technologies and extend the market penetration of these technologies; and (2) develop advanced technologies that increase the savings potential of each application. Both the Windows and Daylighting Group and the Lighting System Research Group have made substantial contributions in each of these areas, and continue to do so through the ongoing research summarized here. 23 refs., 16 figs.

1990-06-01T23:59:59.000Z

366

Technology reviews: Lighting systems  

SciTech Connect

We present a representative review of existing, emerging, and future technology options in each of five hardware and systems areas in envelope and lighting technologies: lighting systems, glazing systems, shading systems, daylighting optical systems, and dynamic curtain wall systems. The term technology is used here to describe any design choice for energy efficiency, ranging from individual components to more complex systems to general design strategies. The purpose of this task is to characterize lighting system in the state of the art in envelope and lighting technologies in order to identify those with promise for advanced integrated systems, with an emphasis on California commercial buildings. For each technology category, the following activities have been attempted to the extent possible: Identify key performance characteristics and criteria for each technology. Determine the performance range of available technologies. Identify the most promising technologies and promising trends in technology advances. Examine market forces and market trends. Develop a continuously growing in-house database to be used throughout the project. A variety of information sources have been used in these technology characterizations, including miscellaneous periodicals, manufacturer catalogs and cut sheets, other research documents, and data from previous computer simulations. We include these different sources in order to best show the type and variety of data available, however publication here does not imply our guarantee of these data. Within each category, several broad classes are identified, and within each class we examine the generic individual technologies that fall into that class.

Schuman, J.; Rubinstein, F.; Papamichael, K.; Beltran, L.; Lee, E.S.; Selkowitz, S.

1992-09-01T23:59:59.000Z

367

Another Side of Light - D  

NLE Websites -- All DOE Office Websites (Extended Search)

D. Three quantum phenomena D. Three quantum phenomena In fluorescence, matter absorbs light waves of a high frequency and then emits light of the same or lower frequency. This process was studied and named by George Gabriel Stokes in the mid-19th century. Today, fluorescence is familiar to us from fluorescent light bulbs. A fluorescent bulb's filament produces ultraviolet light, which is absorbed by the bulb's inner coating, which then emits lower-frequency visible light-more visible light than an incandescent bulb produces with the same wattage. According to the hypothesis of light quanta, during fluorescence an atom absorbs a quantum of light whose energy is proportional to the light wave's frequency. If the atom doesn't supply any extra energy of its own, the light quantum emitted should either have the same energy or less energy

368

Tips: Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Lighting Tips: Lighting May 4, 2012 - 3:16pm Addthis Lighting Choices Save You Money. Energy-efficient light bulbs are available in a wide variety of sizes and shapes. Lighting Choices Save You Money. Energy-efficient light bulbs are available in a wide variety of sizes and shapes. What does this mean for me? Replacing 15 inefficient incandescent bulbs in your home with energy-saving bulbs could save you about $50 per year. For the greatest savings, replace your old incandescent bulbs with ENERGY STAR-qualified bulbs. An average household dedicates about 10% of its energy budget to lighting. Switching to energy-efficient lighting is one of the fastest ways to cut your energy bills. Timers and motion sensors save you even more money by reducing the amount of time lights are on but not being used.

369

The Advanced Light Source Upgrade  

SciTech Connect

The ALS, a third-generation synchrotron light source at Berkeley Lab, has been operating for almost a decade and is generating forefront science by exploiting the high brightness of a third-generation source in three areas: (1) high resolving power for spectroscopy; (2) high spatial resolution for microscopy and spectromicroscopy; and (3) high coherence for experiments such as speckle. However, the ALS was one of the first third-generation machines to be designed, and accelerator and insertion-device technology have significantly changed since its conception. As a result, its performance will inevitably be outstripped by newer, more advanced sources. To remain competitive and then set a new standard, the performance of the ALS, in particular its brightness, must be enhanced. Substantial improvements in brightness and current have always been feasible in principle, but they incur the penalty of a much reduced lifetime, which is totally unacceptable to our users. Significant brightness improvements can be realized in the core soft x-ray region by going to top-off operation, where injection would be quasi-continuous and the lifetime objections disappear. In top-off mode with higher average current, a reduced vertical emittance and beta function, and small-gap permanent-magnet or superconducting insertion devices, one to two orders of magnitude improvement in brightness can be had in the soft x-ray range. These improvements also extend the high energy range of the undulator radiation beyond the current limit of 2000 eV. Descriptions of the upgrade and the important new science achievable are presented.

Chemla, Daniel S.; Feinberg, Benjamin; Hussain, Zahid; Krebs, Gary F.; Padmore, Howard A.; Robin, David S.; Robinson, Arthur L.; Smith, Neville V.

2003-11-04T23:59:59.000Z

370

COG Software Architecture Design Description Document  

SciTech Connect

This COG Software Architecture Design Description Document describes the organization and functionality of the COG Multiparticle Monte Carlo Transport Code for radiation shielding and criticality calculations, at a level of detail suitable for guiding a new code developer in the maintenance and enhancement of COG. The intended audience also includes managers and scientists and engineers who wish to have a general knowledge of how the code works. This Document is not intended for end-users. This document covers the software implemented in the standard COG Version 10, as released through RSICC and IAEA. Software resources provided by other institutions will not be covered. This document presents the routines grouped by modules and in the order of the three processing phases. Some routines are used in multiple phases. The routine description is presented once - the first time the routine is referenced. Since this is presented at the level of detail for guiding a new code developer, only the routines invoked by another routine that are significant for the processing phase that is being detailed are presented. An index to all routines detailed is included. Tables for the primary data structures are also presented.

Buck, R M; Lent, E M

2009-09-21T23:59:59.000Z

371

Lighting In the Library: A Student Energy Audit  

NLE Websites -- All DOE Office Websites (Extended Search)

In In the Library A Student Energy Audit Lighting In the Library A Student Energy Audit . . O FFICE OF E NERGY E FFICIENCY AND R ENEWABLE E NERGY O FFICE OF B UILDING T ECHNOLOGY, S TATE AND C OMMUNITY P ROGRAMS Table of Contents Description Page Introduction Overview and goals of the current and planned school energy audit activities ....................................................................................... 1 Background information on school energy issues .................................................................................................................................... 1 National science and mathematics content standards and benchmarks ................................................................................................. 2 Assessment discussion .............................................................................................................................................................................

372

Energy Star Lighting Verification Program (Program for the Evaluation and Analysis of Residential Lighting)  

SciTech Connect

The Program for the Evaluation and Analysis of Residential Lighting (PEARL) is a watchdog program. It was created in response to complaints received by utility program managers about the performance of certain Energy Star lighting products being promoted within their service territories and the lack of a self-policing mechanism within the lighting industry that would ensure the reliability of these products and their compliance with ENERGY STAR specifications. To remedy these problems, PEARL purchases and tests products that are available to the consumers in the marketplace. The Lighting Research Center (LRC) tests the selected products against the corresponding Energy Star specifications. This report includes the experimental procedure and data results of Cycle 6 and Reflector CFL In-situ Testing of PEARL program during the period of April 2005 to October 2005, along with the description of apparatus used, equipment calibration process, experimental methodology, and research findings from the testing. LRC performed testing for the fixture samples in Cycle 6 against Energy Star residential fixture specifications during this period of time. LRC subcontracted the Reflector CFL In-situ Testing to Luminaire Testing Laboratories located at Allentown PA, and supervised this test.

Conan O'Rourke; Yutao Zhou

2006-03-01T23:59:59.000Z

373

Energy Star Lighting Verification Program (Program for the Evaluation and Analysis of Residential Lighting)  

SciTech Connect

The Program for the Evaluation and Analysis of Residential Lighting (PEARL) is a watchdog program. It was created in response to complaints received by utility program managers about the performance of certain Energy Star lighting products being promoted within their service territories and the lack of a self-policing mechanism within the lighting industry that would ensure the reliability of these products and their compliance with ENERGY STAR specifications. To remedy these problems, PEARL purchases and tests products that are available to the consumers in the marketplace. The Lighting Research Center (LRC) tests the selected products against the corresponding Energy Star specifications. This report includes the experimental procedure and data results of Cycle Five and Cycle Six of PEARL program during the period of April 2004 to October 2004, along with the description of apparatus used, equipment calibration process, experimental methodology, and research findings from the testing. The parameter tested for Cycle Five is lumen maintenance at 40% rated life, and parameters tested for Cycle Six are Efficacy, CCT, CRI, Power Factor, Start Time, Warm-up Time, and Rapid Cycle Stress Test for CFLs.

Conan O'Rourke; Yutao Zhou

2006-03-01T23:59:59.000Z

374

Energy Star Lighting Verification Program (Program for the Evaluation and Analysis of Residential Lighting)  

SciTech Connect

The Program for the Evaluation and Analysis of Residential Lighting (PEARL) is a watchdog program. It was created in response to complaints received by utility program managers about the performance of certain Energy Star lighting products being promoted within their service territories and the lack of a self-policing mechanism within the lighting industry that would ensure the reliability of these products and their compliance with ENERGY STAR specifications. To remedy these problems, PEARL purchases and tests products that are available to the consumers in the marketplace. The Lighting Research Center (LRC) tests the selected products against the corresponding Energy Star specifications. This report includes the experimental procedure and data results of Cycle Four and Cycle Five of PEARL program during the period of October 2003 to April 2004, along with the description of apparatus used, equipment calibration process, experimental methodology, and research findings from the testing. The parameter tested for Cycle Four is lumen maintenance at 40% rated life, and parameters tested for Cycle Five are all parameters required in Energy Star specifications except lumen maintenance at 40% rated life.

Conan O'Rourke; Yutao Zhou

2006-03-01T23:59:59.000Z

375

Energy Star Lighting Verification Program (Program for the Evaluation and Analysis of Residential Lighting)  

SciTech Connect

The Program for the Evaluation and Analysis of Residential Lighting (PEARL) is a watchdog program. It was created in response to complaints received by utility program managers about the performance of certain Energy Star lighting products being promoted within their service territories and the lack of a self-policing mechanism within the lighting industry that would ensure the reliability of these products and their compliance with ENERGY STAR specifications. To remedy these problems, PEARL purchases and tests products that are available to the consumers in the marketplace. The Lighting Research Center (LRC) tests the selected products against the corresponding Energy Star specifications. This report includes the experimental procedure of Cycle 7 of PEARL program during the period of October 2005 to March 2006, along with the description of apparatus used, equipment calibration process, experimental methodology, and research findings from the testing. LRC administered the purchasing of CFL samples to test in Cycle 7, performed 100-hour seasoning for most of the CFL samples received by March 2006, and performed sphere testing for some of the CFL samples at 100 hours of life (initial measurement).

Conan O'Rourke; Yutao Zhou

2006-05-01T23:59:59.000Z

376

Energy Star Lighting Verification Program (Program for the Evaluation and Analysis of Residential Lighting)  

SciTech Connect

The Program for the Evaluation and Analysis of Residential Lighting (PEARL) is a watchdog program. It was created in response to complaints received by utility program managers about the performance of certain Energy Star lighting products being promoted within their service territories and the lack of a self-policing mechanism within the lighting industry that would ensure the reliability of these products and their compliance with ENERGY STAR specifications. To remedy these problems, PEARL purchases and tests products that are available to the consumers in the marketplace. The Lighting Research Center (LRC) tests the selected products against the corresponding Energy Star specifications. This report includes the experimental procedure and data results of Cycle Three and Cycle Four of PEARL program during the period of April 2003 to October 2003, along with the description of apparatus used, equipment calibration process, experimental methodology, and research findings from the testing. The parameter tested for Cycle three is lumen maintenance at 40% rated life, and parameters tested for Cycle Four are all parameters required in Energy Star specifications except lumen maintenance at 40% rated life.

Conan O'Rourke; Yutao Zhou

2006-03-01T23:59:59.000Z

377

Energy Star Lighting Verification Program (Program for the Evaluation and Analysis of Residential Lighting)  

SciTech Connect

The Program for the Evaluation and Analysis of Residential Lighting (PEARL) is a watchdog program. It was created in response to complaints received by utility program managers about the performance of certain Energy Star lighting products being promoted within their service territories and the lack of a self-policing mechanism within the lighting industry that would ensure the reliability of these products and their compliance with ENERGY STAR specifications. To remedy these problems, PEARL purchases and tests products that are available to the consumers in the marketplace. The Lighting Research Center (LRC) tests the selected products against the corresponding Energy Star specifications. This report includes the experimental procedure and data results of Cycle Six of PEARL program during the period of October 2004 to April 2005, along with the description of apparatus used, equipment calibration process, experimental methodology, and research findings from the testing. The parameters tested for CFL models in Cycle Six are 1000-hour Lumen Maintenance, Lumen Maintenance at 40% Rated Life, and Interim Life Test, along with a series of parameters verified, such as ballast electrical parameters and Energy Star label.

Conan O'Rourke; Yutao Zhou

2006-03-01T23:59:59.000Z

378

Business Case Slide 25: High-Value: Semiconductors - Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Semiconductors - Description Receipt of rare DUO crystals at ORNL Receipt of rare DUO2 crystals at ORNL Description Use DUO2 as a semiconductor material Computer CPU or RAM chips...

379

System design description for the HMT Rotation Motor Heater System  

SciTech Connect

This document is the design description for the Rotation Motor Heater System on waste tank 241-SY-101. The description includes the certified vendor (CV) file number, operators instructions, and heater sizing calculations.

Vargo, G.F. Jr.

1995-05-18T23:59:59.000Z

380

Description of the Google update summarizer at TAC-2011  

Science Conference Proceedings (OSTI)

Page 1. Description of the Google update summarizer at TAC-2011 Jean-Yves Delort Google Research Brandschenkestrasse ...

2012-03-27T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

PCR Kit Name Manufacturer Kit Description Profiler Plus ...  

Science Conference Proceedings (OSTI)

Page 1. PCR Kit Name Manufacturer Kit Description Profiler Plus Applied Biosystems AmpFLSTR® Profiler Plus™ (Part Number 4303326) ...

2010-06-29T23:59:59.000Z

382

SY101 in situ viscometer instrument system design description  

DOE Green Energy (OSTI)

This documents the design and description of the in situ viscometer, developed for the hydrogen mitigation project.

Pearce, K.L.; Stokes, T.I.; Vagelatos, N.

1994-08-18T23:59:59.000Z

383

Incandescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Incandescent Lighting Incandescent Lighting Incandescent Lighting October 17, 2013 - 6:15pm Addthis Incandescent lighting is the most common, and least energy efficient, type of lighting used in homes. | Photo courtesy of ©iStockphoto/TokenPhoto. Incandescent lighting is the most common, and least energy efficient, type of lighting used in homes. | Photo courtesy of ©iStockphoto/TokenPhoto. Incandescent lamps are often considered the least energy efficient type of electric lighting commonly found in residential buildings. Although inefficient, incandescent lamps possess a number of key advantages--they are inexpensive to buy, turn on instantly, are available in a huge array of sizes and shapes and provide a pleasant, warm light with excellent color rendition. However, because of their relative inefficiency and short life spans, they

384

Incandescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Incandescent Lighting Incandescent Lighting Incandescent Lighting October 17, 2013 - 6:15pm Addthis Incandescent lighting is the most common, and least energy efficient, type of lighting used in homes. | Photo courtesy of ©iStockphoto/TokenPhoto. Incandescent lighting is the most common, and least energy efficient, type of lighting used in homes. | Photo courtesy of ©iStockphoto/TokenPhoto. Incandescent lamps are often considered the least energy efficient type of electric lighting commonly found in residential buildings. Although inefficient, incandescent lamps possess a number of key advantages--they are inexpensive to buy, turn on instantly, are available in a huge array of sizes and shapes and provide a pleasant, warm light with excellent color rendition. However, because of their relative inefficiency and short life spans, they

385

Fluorescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fluorescent Lighting Fluorescent Lighting Fluorescent Lighting October 17, 2013 - 5:44pm Addthis Fluorescent Lighting Fluorescent Lighting Fluorescent lamps use 25%-35% of the energy used by incandescent products to provide a similar amount of light. They also last about 10 times longer (7,000-24,000 hours). The two general types of fluorescent lamps are: Compact fluorescent lamps (CFLs) -- commonly found with integral ballasts and screw bases, these are popular lamps often used in household fixtures Fluorescent tube and circline lamps -- typically used for task lighting such as garages and under cabinet fixtures, and for lighting large areas in commercial buildings. CFLs CFLs combine the energy efficiency of fluorescent lighting with the convenience and popularity of incandescent fixtures. CFLs fit most fixtures

386

National Synchrotron Light Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Report 2001 Report 2001 National Synchrotron Light Source For the period October 1, 2000 through September 30, 2001 Introduction Science Highlights Year in Review Operations Publications Abstracts Nancye Wright & Lydia Rogers The National Synchrotron Light Source Department is supported by the Office of Basic Energy Sciences United States Department of Energy Washington, D.C. Brookhaven National Laboratory Brookhaven Science Associates, Inc. Upton, New York 11973 Under Contract No. DE-AC02-98CH10886 Mary Anne Corwin Steven N. Ehrlich & Lisa M. Miller Managing Editor Science Editors Production Assistants Cover images (clockwise from top left) 1. from Science Highlight by K.R. Rajashankar, M.R. Chance, S.K. Burley, J. Jiang, S.C. Almo, A. Bresnick, T. Dodatko, R. Huang, G. He,

387

Light amplification using semiconductors  

Science Conference Proceedings (OSTI)

During the summer of 1953, John von Neumann discussed his ideas concerning light amplification using semiconductors with Edward Teller. In September of that year, von Neumann sent a manuscript containing his ideas and calculations on this subject to Teller for his comments. To the best of our knowledge, von Neumann did not take time to work further on these ideas, and the manuscript remained unpublished. These previously unpublished writings of John von Neumann on the subject of light amplification in semiconductors are printed as a service to the laser community. While von Neumann's original manuscript and his letter to Teller are available to anyone who visits the Library of Congress, it is much more convenient to have this paper appear in an archival journal.

Dupuis, R.D.

1987-06-01T23:59:59.000Z

388

Developing architectural lighting representations  

E-Print Network (OSTI)

This paper reports on the development of a visualization system for architectural lighting designers. It starts by motivating the problem as both complex in its physics and social organization. Three iterations of prototypes for displaying time and space varying phenomena are discussed. Fieldwork is presented to identify where in practice they will be most effective. A set of user studies, one of which is analyzed in fine-grained detail, show how building designers incorporate visualization on hypothetical design problems. This has positive implications for both energy efficiency and lighting quality in buildings. CR Categories: H.1.2 [Models and Principles]: User/Machine Systems—Human factors; D.2.2 [Software Engineering]: Design

Daniel C. Glaser; Roger Tan

2003-01-01T23:59:59.000Z

389

Clusters in Light Nuclei  

E-Print Network (OSTI)

A great deal of research work has been undertaken in the alpha-clustering study since the pioneering discovery, half a century ago, of 12C+12C molecular resonances. Our knowledge of the field of the physics of nuclear molecules has increased considerably and nuclear clustering remains one of the most fruitful domains of nuclear physics, facing some of the greatest challenges and opportunities in the years ahead. In this work, the occurence of "exotic" shapes in light N=Z alpha-like nuclei is investigated. Various approaches of superdeformed and hyperdeformed bands associated with quasimolecular resonant structures are presented. Results on clustering aspects are also discussed for light neutron-rich Oxygen isotopes.

C. Beck; P. Papka; A. Sanchez i Zafra; S. Thummerer; F. Azaiez; P. Bednarczyk; S. Courtin; D. Curien; O. Dorvaux; A. Goasduff; D. Lebhertz; A. Nourreddine; M. Rousseau; M. -D. Salsac; W. von Oertzen; B. Gebauer; C. Wheldon; Tz. Kokalova; G. Efimov; V. Zherebchevsky; Ch. Schulz; H. G. Bohlen; D. Kamanin; G. de Angelis; A. Gadea; S. Lenzi; D. R. Napoli; S. Szilner; M. Milin; W. N. Catford; D. G. Jenkins; G. Royer

2010-11-15T23:59:59.000Z

390

Fusion pumped light source  

DOE Patents (OSTI)

Apparatus is provided for generating energy in the form of light radiation. A fusion reactor is provided for generating a long, or continuous, pulse of high-energy neutrons. The neutron flux is coupled directly with the lasing medium. The lasing medium includes a first component selected from Group O of the periodic table of the elements and having a high inelastic scattering cross section. Gamma radiation from the inelastic scattering reactions interacts with the first component to excite the first component, which decays by photon emission at a first output wavelength. The first output wavelength may be shifted to a second output wavelength using a second liquid component responsive to the first output wavelength. The light outputs may be converted to a coherent laser output by incorporating conventional optics adjacent the laser medium.

Pappas, Daniel S. (Los Alamos, NM)

1989-01-01T23:59:59.000Z

391

Fusion pumped light source  

DOE Patents (OSTI)

Apparatus is provided for generating energy in the form of light radiation. A fusion reactor is provided for generating a long, or continuous, pulse of high-energy neutrons. The neutron flux is coupled directly with the lasing medium. The lasing medium includes a first component selected from Group O of the periodic table of the elements and having a high inelastic scattering cross section. Gamma radiation from the inelastic scattering reactions interacts with the first component to excite the first component, which decays by photon emission at a first output wavelength. The first output wavelength may be shifted to a second output wavelength using a second liquid component responsive to the first output wavelength. The light outputs may be converted to a coherent laser output by incorporating conventional optics adjacent the lasing medium. 3 figs.

Pappas, D.S.

1988-09-01T23:59:59.000Z

392

Light from cosmic strings  

Science Conference Proceedings (OSTI)

The time-dependent metric of a cosmic string leads to an effective interaction between the string and photons--the ''gravitational Aharonov-Bohm'' effect--and causes cosmic strings to emit light. We evaluate the radiation of pairs of photons from cosmic strings and find that the emission from cusps, kinks and kink-kink collisions occurs with a flat spectrum at all frequencies up to the string scale. Further, cusps emit a beam of photons, kinks emit along a curve, and the emission at a kink-kink collision is in all directions. The emission of light from cosmic strings could provide an important new observational signature of cosmic strings that is within reach of current experiments for a range of string tensions.

Steer, Daniele A.; Vachaspati, Tanmay [APC 10 rue Alice Domon et Leonie Duquet, 75205 Paris Cedex 13 (France); Physics Department, Arizona State University, Tempe, Arizona 85287 (United States)

2011-02-15T23:59:59.000Z

393

MCDL: a reduced but extensible multimedia contents description language  

Science Conference Proceedings (OSTI)

Multimedia contents are more and more present in our life and their presentation usually rests on a text-based description that defines rules and properties of such contents and is produced by markup description languages (e.g., XML, MPEG7-DDL and SMIL). ... Keywords: MPEG7-DDL, SMIL, contents sychronization, multimedia contents description

M. Furini

2007-03-01T23:59:59.000Z

394

Efficient Light Sources Today  

E-Print Network (OSTI)

This paper reviews new lamp and lighting technology in terms of application and economic impact. Included are the latest advances in High Intensity Discharge systems, energy saving fluorescent lamps and ballasts, and the new state of the art high performance fluorescent systems. Cost analyses will show that typical owning and operating cost reductions of 15 to 65% can be achieved without sacrificing illumination levels when the right system is chosen and properly applied.

Hart, A. L.

1982-01-01T23:59:59.000Z

395

New Lighting Technologies  

Science Conference Proceedings (OSTI)

This Electric Power Research Institute (EPRI) technical update continues the technical assessment of advanced lighting technologies in the following product areas—linear LED T8 fluorescent replacements, Edison-based dimmable LED lamps, commercial replacement side-lit LED fixtures, Edison-based reduced-consumption halogen lamps designed to replace 100W incandescent lamps, high bay induction LED lamps, and architectural LED lamps. Many of the products in this year’s report are designed as ...

2012-10-08T23:59:59.000Z

396

Lighting for video February 23, 2012  

E-Print Network (OSTI)

) LED light panel, C) HMI/MH light with diffusion, D) fluorescent ("kino flo") style light fluorescent or LED lights. In the earlier days this was created by bouncing light off reflectors, for example a soft light as a key light (LED or fluorescent) and then use available lights in the back- ground

Porr, Bernd

397

Gradient Combinatorial Libraries via Modulated Light ...  

Science Conference Proceedings (OSTI)

... Libraries via Modulated Light Exposure. Bookmark and Share Gradient Combinatorial Libraries via Modulated Light Exposure. ...

398

Edmund G. Brown Jr. LIGHTING CALIFORNIA'S FUTURE  

E-Print Network (OSTI)

Edmund G. Brown Jr. Governor LIGHTING CALIFORNIA'S FUTURE: SMART LIGHT-EMITTING DIODE LIGHTING's Future: Smart LightEmitting Diode Lighting in Residential Fans. California Energy Commission, PIER. For the Smart Light emitting Diode Lighting in Residential Fans Project, the California Lighting Technology

399

Lighting the Way with Compact Fluorescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting the Way with Compact Fluorescent Lighting Lighting the Way with Compact Fluorescent Lighting Lighting the Way with Compact Fluorescent Lighting April 28, 2009 - 5:00am Addthis John Lippert There is a major push today to get homeowners to adopt compact fluorescent lamp (CFL) light bulbs. They have been on the market for nearly three decades, and many homeowners still do not use them widely. But the tide is definitely turning. Their availability and the percentage of homeowners familiar with the technology and purchasing them for their homes have been steadily rising. The products have improved considerably compared to early products, and their prices have plummeted. The ENERGY STAR® Change a Light, Change the World Campaign has been running now for more than half a dozen years. This campaign is designed to

400

Lighting the Way with Compact Fluorescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting the Way with Compact Fluorescent Lighting Lighting the Way with Compact Fluorescent Lighting Lighting the Way with Compact Fluorescent Lighting April 28, 2009 - 5:00am Addthis John Lippert There is a major push today to get homeowners to adopt compact fluorescent lamp (CFL) light bulbs. They have been on the market for nearly three decades, and many homeowners still do not use them widely. But the tide is definitely turning. Their availability and the percentage of homeowners familiar with the technology and purchasing them for their homes have been steadily rising. The products have improved considerably compared to early products, and their prices have plummeted. The ENERGY STAR® Change a Light, Change the World Campaign has been running now for more than half a dozen years. This campaign is designed to

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Solid-State Lighting: Municipal Consortium LED Street Lighting...  

NLE Websites -- All DOE Office Websites (Extended Search)

Boston, MA to someone by E-mail Share Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Boston, MA on Facebook Tweet about...

402

Solid-State Lighting: Municipal Consortium LED Street Lighting...  

NLE Websites -- All DOE Office Websites (Extended Search)

Dallas, TX to someone by E-mail Share Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Dallas, TX on Facebook Tweet about...

403

Energy Savings Potential of Solid State Lighting in General Lighting...  

NLE Websites -- All DOE Office Websites (Extended Search)

by Arthur D. Little, Inc. for U.S. Department of Energy Energy Savings Potential of Solid State Lighting in General Lighting Applications Final Report April 2001 Energy Savings...

404

Light-Matter Quantum Interface  

E-Print Network (OSTI)

We propose a quantum interface which applies multiple passes of a pulse of light through an atomic sample with phase/polarization rotations in between the passes. Our proposal does not require nonclassical light input or measurements on the system, and it predicts rapidly growing unconditional entanglement of light and atoms from just coherent inputs. The proposed interface makes it possible to achieve a number of tasks within quantum information processing including teleportation between light and atoms, quantum memory for light and squeezing of atomic and light variables.

K. Hammerer; K. Molmer; E. S. Polzik; J. I. Cirac

2003-12-18T23:59:59.000Z

405

Project_Descriptions_ITP_ARRA_Awards.xls  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Selections for Industrial Technologies Program Recovery Act Funding Selections for Industrial Technologies Program Recovery Act Funding Deployment of Combined Heat and Power (CHP) Systems, District Energy Systems, Waste Energy Recovery Systems, and Efficient Industrial Equipment Award Winners City and State Project Description Total DOE Funding Air Products and Chemicals, Inc. Middletown, OH Waste Energy Project at the AK Steel Corporation Middletown Works. The project will construct a combined cycle power generation plant at the Middletown, OH, works of AK Steel that will capture and process the blast furnace gas (BFG). The BFG, generated in ironmaking operations, is either flared or used to make steam needed for industrial processes . Currently, over 50% of the BFG is flared. This project will utilize

406

Site Acquisition Description/ Category Contracting Office Solicitation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Acquisition Acquisition Description/ Category Contracting Office Solicitation Method Contract Type Estimated Dollar Range Pre-Solicitation Conference/ Industry Meetings Draft- Solicitation Synopsis Solicitation Receipt of Proposal Anticipated Evaluations Complete/Award Paducah GDP http://www.emcbc.doe.g ov/pgdp%20deactivatio n/ EMCBC Multiple award IDIQ contract holders Cost Plus Award Fee with Fixed Price clins $600M- $680M 5/1/2013 5/29/2013 N/A 8/9/2013 Jul-Sep 2013 Oct-Dec 2014 ETEC EMCBC Small Business Firm-Fixed Price & Fixed Unit Rate Price CLINS $25M-$40M 9/19/2013 Jul-Sep 2013 Oct-Dec 2013 Oct-Dec 2013 Jan-Mar 2014 Jul-Sep 2014 Lab Services EMCBC Small Business Fixed Price $40M-$60M Jan-Mar 2014 Jan-Mar 2014 Jan-Mar 2014 Apr-Jun 2014 Apr-Jun 2014 Jan-Mar 2015

407

INCOMING DOCUMENT CONTROL FORM DOCUMENT DESCRIPTION ORGANIZATIO  

Office of Legacy Management (LM)

INCOMING DOCUMENT CONTROL FORM DOCUMENT DESCRIPTION ORGANIZATIO )ATE COMPLETED: ACTION NUMBER: I ! I I DOCUMENT CONTROL DATE INITIALS DATA BASE: ACTION LOG: FILED: To : Doug Tonkay, OTS Decen From: MIchele Landis, dRW Subject: Draft report ~ Result= of the Radiologic; Former Ore Storage Site, Palmerton, Pennsylvania Attached is one copy of the draft report. PIE provide your comments to me by January 16, 1990. tlichele Landis ,9, 1989 "ey at the review and Results of the Radiological SJrvey at the Former Ore S&age Site, Palmerton, PennsylvLnia (PPOOI) J. L Quikd J. W. Cdchdr W. D. &rei ! I : HEALTH AND t5UEI-Y RESEARCH DMSi Waste Management Research and Development Prc (Activity No. AH 10 05 00 0; NEAHOOl) RESULTS OF 'I-HE RADIOLOGICAL SURV

408

Title, Location, Document Number Estimated Cost Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moody to Lev, SUBJECT: NEPA 2012 APS for DOE-SRS, Dated: JAN 25 2012 Moody to Lev, SUBJECT: NEPA 2012 APS for DOE-SRS, Dated: JAN 25 2012 Title, Location, Document Number Estimated Cost Description EA Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain FONSI: uncertain EA Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain FONSI: uncertain Total Estimated Cost $65,000 Annual NEPA Planning Summary NEPA Reviews of Proposals to Implement Enterprise SRS Initiatives unknown The Savannah River Site Strategic Plan for 2011 - 2015 describes 12 initiatives that Enterprise SRS will pursue by applying SRS's management core competencies in nuclear materials. Implementation of new missions resulting from this effort will likely require NEPA review. However, until firm proposals are developed

409

Property:Description | Open Energy Information  

Open Energy Info (EERE)

This is a property of type Text. This is a property of type Text. Pages using the property "Description" Showing 25 pages using this property. (previous 25) (next 25) 1 1.5-ft Wave Flume Facility + Automated data acquisition and control system 10-ft Wave Flume Facility + Automated data acquisition and control system 11-ft Wave Flume Facility + Automated data acquisition and control system 2 2-ft Flume Facility + Automated data acquisition and control system 3 3-ft Wave Flume Facility + Automated data acquisition and control system 5 5-ft Wave Flume Facility + Automated data acquisition and control system 6 6-ft Wave Flume Facility + Automated data acquisition and control system A Alden Large Flume + Differential pressure transducers, acoustic profiling, propeller meters, load cells, computer data acquisition systems.

410

Electricity Delivery and Energy Reliability PROGRAM DESCRIPTION  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 2 Electricity Delivery and Energy Reliability PROGRAM DESCRIPTION The Office of Electricity Delivery and Energy Reliability (OE) leads national efforts to modernize the electric grid, enhance security and reliability of energy infrastructure, and facilitate recovery from disruptions to the energy supply. As stated in the President's A Policy Framework for the 21 st Century Grid, a smarter, modernized electric grid is fundamental to transforming the Nation's energy system and securing US leadership in a clean energy future. OE supports activities that enable innovation across the energy sector, empower American consumers, and secure our energy future. OE consists of three programs: Research and Development; Permitting, Siting and Analysis; and Infrastructure Security and Energy Restoration.

411

Thermodynamics of quantum informational systems - Hamiltonian description  

E-Print Network (OSTI)

It is often claimed, that from a quantum system of d levels, and entropy S and heat bath of temperature T one can draw kT(ln d -S) amount of work. However, the usual arguments based on Szilard engine are not fully rigorous. Here we prove the formula within Hamiltonian description of drawing work from a quantum system and a heat bath, at a cost of entropy of the system. We base on the derivation of thermodynamical laws and quantities in [R. Alicki, J. Phys. A, 12, L103 (1979)] within a weak coupling limit. Our result provides fully physical scenario for extracting thermodynamical work from quantum correlations [J. Oppenheim et al. Phys. Rev. Lett. 89, 180402 (2002)]. We also derive Landauer principle as a consquence of second law within the considered model.

Robert Alicki; Michal Horodecki; Pawel Horodecki; Ryszard Horodecki

2004-02-02T23:59:59.000Z

412

Geometric Complexity and Minimum Description Length Principle  

E-Print Network (OSTI)

The question of how one should decide among competing explanations of data is at the heart of the scientific enterprise. Quantitative methods of selecting among models have been advanced over the years without an underlying theoretical framework to guide the enterprise and evaluate new developments. In this paper, we show that differential geometry provides a unified understanding of the model selection problem. Foremost among its contributions is a reconceptualization of the problem as one of counting probability distributions. This reconceptualization naturally leads to development of a "geometric" complexity measure, which turns out to be equal to the Minimum Description Length (MDL) complexity measure Rissanen (1996) recently proposed. We demonstrate an application of the geometric complexity measure to model selection in cognitive psychology, with models of cognitive modeling in three different areas (psychophysics, information integration, categorization).

In Jae Myung; Shaobo Zhang; Mark A. Pitt

1999-01-01T23:59:59.000Z

413

WASTE HANDLING BUILDING ELECTRICAL SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect

The Waste Handling Building Electrical System performs the function of receiving, distributing, transforming, monitoring, and controlling AC and DC power to all waste handling building electrical loads. The system distributes normal electrical power to support all loads that are within the Waste Handling Building (WHB). The system also generates and distributes emergency power to support designated emergency loads within the WHB within specified time limits. The system provides the capability to transfer between normal and emergency power. The system provides emergency power via independent and physically separated distribution feeds from the normal supply. The designated emergency electrical equipment will be designed to operate during and after design basis events (DBEs). The system also provides lighting, grounding, and lightning protection for the Waste Handling Building. The system is located in the Waste Handling Building System. The system consists of a diesel generator, power distribution cables, transformers, switch gear, motor controllers, power panel boards, lighting panel boards, lighting equipment, lightning protection equipment, control cabling, and grounding system. Emergency power is generated with a diesel generator located in a QL-2 structure and connected to the QL-2 bus. The Waste Handling Building Electrical System distributes and controls primary power to acceptable industry standards, and with a dependability compatible with waste handling building reliability objectives for non-safety electrical loads. It also generates and distributes emergency power to the designated emergency loads. The Waste Handling Building Electrical System receives power from the Site Electrical Power System. The primary material handling power interfaces include the Carrier/Cask Handling System, Canister Transfer System, Assembly Transfer System, Waste Package Remediation System, and Disposal Container Handling Systems. The system interfaces with the MGR Operations Monitoring and Control System for supervisory monitoring and control signals. The system interfaces with all facility support loads such as heating, ventilation, and air conditioning, office, fire protection, monitoring and control, safeguards and security, and communications subsystems.

S.C. Khamamkar

2000-06-23T23:59:59.000Z

414

Monitored Geologic Repository Project Description Document  

SciTech Connect

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the Yucca Mountain Site Characterization Project Requirements Document (YMP RD) (YMP 2001a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M&O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).

P. Curry

2001-06-26T23:59:59.000Z

415

Electric Markets Technical Assistance Program: FY1999 Grant Descriptions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FY1999 Grant FY1999 Grant Descriptions and Contact Information Electric Markets Technical Assistance Program: FY1999 Grant Descriptions and Contact Information Public Benefits and Distributed Generation Outreach Project The National Association of Regulatory Utility Commissioners (NARUC) will hold collaborative workshops with key stakeholders to build consensus on effective policy options for emerging competitive distributed generation markets. FY1999 Grant Descriptions and Contact Information More Documents & Publications Electric Restructuring Outreach Activities and Information Dissemination to State Public Utility Regulators Electric Markets Technical Assistance Program: FY2001 Grant Descriptions and Contact Information Electric Markets Technical Assistance Program: FY2003 Grant Descriptions

416

Solid-State Lighting: Contacts  

NLE Websites -- All DOE Office Websites (Extended Search)

Contacts Contacts Printable Version Share this resource Send a link to Solid-State Lighting: Contacts to someone by E-mail Share Solid-State Lighting: Contacts on Facebook Tweet about Solid-State Lighting: Contacts on Twitter Bookmark Solid-State Lighting: Contacts on Google Bookmark Solid-State Lighting: Contacts on Delicious Rank Solid-State Lighting: Contacts on Digg Find More places to share Solid-State Lighting: Contacts on AddThis.com... Contacts Web site and program contacts are provided below. Website Contact Send us your comments, report problems, and/or ask questions about information on this site. Program Contacts Contact information for the Solid-State Lighting Program. Contacts | Web Site Policies | U.S. Department of Energy | USA.gov Content Last Updated: 02/14

417

Solid-State Lighting: Publications  

NLE Websites -- All DOE Office Websites (Extended Search)

Publications to someone by Publications to someone by E-mail Share Solid-State Lighting: Publications on Facebook Tweet about Solid-State Lighting: Publications on Twitter Bookmark Solid-State Lighting: Publications on Google Bookmark Solid-State Lighting: Publications on Delicious Rank Solid-State Lighting: Publications on Digg Find More places to share Solid-State Lighting: Publications on AddThis.com... Conferences & Meetings Presentations Publications Postings Articles Program Fact Sheets Technology Fact Sheets CALiPER Reports GATEWAY Reports LED Lighting Facts Reports Project Reports Studies and Reports Technology Roadmaps Product Performance Guides Webcasts Videos Tools Publications The Solid-State Lighting (SSL) program produces a comprehensive portfolio of publications, ranging from overviews of the program's research

418

Solid-State Lighting: Events  

NLE Websites -- All DOE Office Websites (Extended Search)

Events Printable Version Share this resource Send a link to Solid-State Lighting: Events to someone by E-mail Share Solid-State Lighting: Events on Facebook Tweet about Solid-State...

419

Solid-State Lighting: Partnerships  

NLE Websites -- All DOE Office Websites (Extended Search)

About the Program Printable Version Share this resource Send a link to Solid-State Lighting: Partnerships to someone by E-mail Share Solid-State Lighting: Partnerships on Facebook...

420

Another Side of Light - C  

Office of Scientific and Technical Information (OSTI)

light waves in a furnace should act much the same if they behave according to Planck's quantum law. As we noted above, the intensity of the lower-frequency light is described...

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Success Stories: Post Office Lighting  

... Post Office reduces energy, provides better lighting for multitasks in the home and office, and saves money. The system ...

422

Photodetector with enhanced light absorption  

DOE Patents (OSTI)

A photodetector including a light transmissive electrically conducting layer having a textured surface with a semiconductor body thereon. This layer traps incident light thereby enhancing the absorption of light by the semiconductor body. A photodetector comprising a textured light transmissive electrically conducting layer of SnO.sub.2 and a body of hydrogenated amorphous silicon has a conversion efficiency about fifty percent greater than that of comparative cells. The invention also includes a method of fabricating the photodetector of the invention.

Kane, James (Lawrenceville, NJ)

1985-01-01T23:59:59.000Z

423

Can dendritic cells see light?  

E-Print Network (OSTI)

There are many reports showing that low-level light/laser therapy (LLLT) can enhance wound healing,

Hamblin, Michael R.

424

Twenty Years of Lighting Research  

NLE Websites -- All DOE Office Websites (Extended Search)

our lighting laboratory, including the goniophotometer and luminaire thermal performance instrumentation, support the development of new products, such as efficient...

425

Lighting and the Bottom Line  

E-Print Network (OSTI)

A discussion of the cost of light and how it relates to the cost of people. The new Illuminating Engineering Society recommended method of determining lighting levels will be explained. Also several ways of providing good lighting to increase productivity while saving energy and money will be included in this presentation.

Christensen, M.

1981-01-01T23:59:59.000Z

426

The lighting of underground mines  

SciTech Connect

This book describes mine lighting problems. It is intended as a textbook on mine lighting knowledge, a reference book for people needing information on the subject, and as a design guide for mine personnel who lack specific training in lighting principles.

Trotter, D.A.

1983-01-01T23:59:59.000Z

427

Arnold Schwarzenegger LIGHTING RESEARCH PROGRAM  

E-Print Network (OSTI)

fluorescent task lamp. The prototype used commercially available materials: 1watt light emitting diodes to the mounting board. Development of LightEmitting Diode Task Lamp using Advanced Technologies: Prototype 2 lightemitting diode task lamp. The problem of developing an energy efficient light emitting diode task lamp

428

Arnold Schwarzenegger LIGHTING RESEARCH PROGRAM  

E-Print Network (OSTI)

/or daylighting availability. Advanced Lighting Luminaries and Systems consisted of four projects focused· · · · · · Energy-Related Environmental Research Energy Systems Integration Environmentally Preferred Advanced and costs. Demand Responsive Lighting Systems comprised three projects that developed advanced lighting

429

Slow-light solitons revisited  

E-Print Network (OSTI)

We investigate propagation of slow-light solitons in atomic media described by the nonlinear $\\Lambda$-model. Under a physical assumption, appropriate to the slow light propagation, we reduce the $\\Lambda$-scheme to a simplified nonlinear model, which is also relevant to 2D dilatonic gravity. Exact solutions describing various regimes of stopping slow-light solitons can then be readily derived.

A. V. Rybin; I. P. Vadeiko; A. R. Bishop

2006-08-11T23:59:59.000Z

430

Red light, green light | Y-12 National Security Complex  

NLE Websites -- All DOE Office Websites (Extended Search)

Red light, green light Red light, green light Red light, green light Posted: December 4, 2013 - 6:28pm After the National Nuclear Security Administration signaled Y-12 to begin resuming full operations after a potential furlough, Production Vice President Bill Tindal said Production had two objectives: refocus production employees on safety, security and quality, and ensure preparedness for normal operations. "It's tempting to jump right back in when you get the green light," Tindal said. "We were in an abnormal state that really shook people. Focusing on people came first." Production began with return-to-work briefings. "During the briefings, we asked employees what they were concerned about, what was causing them stress," Tindal said. "Another concept from the briefing was the theme

431

AHTR Refueling Systems and Process Description  

SciTech Connect

The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt-cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy's Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the levels of maturity of the various SSCs to provide guidance for future technology developments. The conceptual design information presented in this report is very preliminary in nature. Significant uncertainty remains about several aspects of the process and even the radiation and mechanical performance of plate-type coated-particle fuel.

Varma, Venugopal Koikal [ORNL; Holcomb, David Eugene [ORNL; Bradley, Eric Craig [ORNL; Zaharia, Nathaniel M [ORNL; Cooper, Eliott J [ORNL

2012-07-01T23:59:59.000Z

432

AHTR Refueling Systems and Process Description  

SciTech Connect

The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt–cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy’s Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published [1], and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the levels of maturity of the various SSCs to provide guidance for future technology developments. The conceptual design information presented in this report is very preliminary in nature. Significant uncertainty remains about several aspects of the process and even the radiation and mechanical performance of plate-type coated-particle fuel.

Varma, V.K.; Holcomb, D.E.; Bradley, E.C.; Zaharia, N.M.; Cooper, E.J.

2012-07-15T23:59:59.000Z

433

The IMPACTT model: Structure and technical description  

SciTech Connect

The Integrated Market Penetration and Anticipated Cost of Transportation Technologies model, or IMPACTT, is a spreadsheet model that calculates the effect of advanced-technology vehicles and market penetration on baseline fuel use and emissions. Outputs include estimates of the quantity and value of oil displaced and emissions reduced by advanced-technology vehicles, the quantity of alternative fuels they consume, and the total incremental costs bome by purchasers of advanced-technology vehicles. In the current version of IMPACTT, up to eight fuel or engine technologies applicable to light-duty vehicles can be modeled by using a three-phase approach. First, the vehicle stock and miles traveled by the advanced-technology vehicle are determined. Second, assumptions about efficiency and fuel shares are used to estimate substitution-fuel use and oil displacement. Third, changes in emissions of carbon monoxide, non-methane hydrocarbons, nitrogen oxides, and carbon dioxide are computed.

Mintz, M.M.; Tompkins, M.M.; Camp, J.

1994-12-01T23:59:59.000Z

434

FIRETEC: A transport description of wildfire behavior  

DOE Green Energy (OSTI)

Wildfires are a threat to human life and property, yet they are an unavoidable part of nature and in some instances they are necessary for the natural maintenance and evolution of forests. Investigators have attempted to describe the behavior (speed, direction, modes of spread) of wildfires for over fifty years. Current models for numerical description are mainly algebraic and based on statistical or empirical ideas. The authors describe, in contrast, a transport model called FIRETEC, which is a self-determining fire behavior model. The use of transport formulations connects the propagation rates to the full conservation equations for energy, momentum, species concentrations, mass, and turbulence. In this text, highlights of the model formulation and results are described. The goal of the FIRETEC model is to describe average behavior of the gases and fuels. It represents the essence of the combination of many small-scale processes without resolving each process in complete detail. The FIRETEC model is implemented into a computer code that examines line-fire propagation in a vertical spatial cut parallel to the direction of advancement. With this code the authors are able to examine wind effects, slope effects, and the effects of nonhomogeneous fuel distribution.

Linn, R.R.; Harlow, F.H.

1997-12-01T23:59:59.000Z

435

Comparing Light-Emitting Diode (LED) Street and Area Lighting to Traditional Lighting Technologies  

Science Conference Proceedings (OSTI)

Manufacturing advances have now made the use of light-emitting diode (LED) technology practical for street and area lighting. To better understand the application, the Electric Power Research Institute (EPRI) teamed with Southern Company and Gulf Power to install LED street lights at a demonstration site and measure their performance. The data showed several disadvantages for the LED lights, such as a lower efficacy compared to traditional technology and lower immunity to electrical disturbances, but an ...

2012-04-06T23:59:59.000Z

436

Comparing Light-Emitting Diode (LED) Street and Area Lighting to Traditional Lighting Technologies  

Science Conference Proceedings (OSTI)

In 2008, the Tennessee Valley Authority (TVA) and Benton County Electric System partnered with the Electric Power Research Institute (EPRI) to launch an investigation into the use of LED technology for area lighting. The goal of the project—called the LED Street and Area Lighting Demonstration—was to discover a better light bulb, one that not only meets the outdoor lighting requirements of consumers, but also uses less electricity in doing so. This case study discusses the results of ...

2012-09-28T23:59:59.000Z

437

Lighting Group: Controls and Communications  

NLE Websites -- All DOE Office Websites (Extended Search)

Communications Communications Controls and Communications The Controls and Communications research activity investigates how digital technologies, such as Bluetooth, can be applied to building lighting control systems to increase building efficiency and improve occupant comfort and productivity. Projects range from embedded device networks applied to building lighting systems, to WiFi and environmental sensing and monitoring. light switch Current Projects IBECS (Integrated Building Environmental Communications System) Wireless Lighting Controls (with DUST Networks) HPCBS Advanced Digital Controls Building Control Systems Integration Completed Projects CEC Public Interest Energy Research (PIER) Projects 450 Golden Gate Project New Publications Standardizing Communication Between Lighting Devices: A Role for

438

Commercial Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Lighting Commercial Lighting At an estimated cost of $38 billion a year, lighting represents the largest source of electricity consumption in U.S. commercial buildings. By combining an inexpensive camera with a high-speed microprocessor and algorithms, researchers at the National Renewable Energy Lab developed an occupancy sensor can recognize the presence of human occupants more than 90 percent of the time -- an advancement that could lead to enormous energy savings in commercial buildings. At an estimated cost of $38 billion a year, lighting represents the largest source of electricity consumption in U.S. commercial buildings. By combining an inexpensive camera with a high-speed microprocessor and

439

Light Neutralinos in the NMSSM  

E-Print Network (OSTI)

Next-to-Minimal Supersymmetric Standard Model neutralino dark matter candidates in the (1-15) GeV range are found with a Markov Chain Monte Carlo scanning code. A very light, singlet-like Higgs and/or CP-odd Higgs is needed in order to achieve such light masses. Light scalar Higgses can yield large direct detection cross sections, suitable for an account of the recent claims for signals. Neutralino annihilations via resonant light pseudoscalar Higgs exchanges can overproduce the indirect yield of gamma-rays from dwarf spheroidal galaxies. Hence, direct and indirect detection experiments probe different configurations of the NMSSM with a light neutralino DM candidate.

Vásquez, Daniel Albornoz

2011-01-01T23:59:59.000Z

440

Image-Based Lighting Design  

E-Print Network (OSTI)

In this paper, we present a lighting design framework for neardiffuse real objects, starting from a set of prerecorded photographs of an object under various lighting conditions. Light sources are placed at fixed positions around an object, for which the intensities are to be determined. Using existing digital imaging software, the lighting designer paints the desired illumination distribution on a photograph of an object. This painted-on illumination is used to determine the light intensities which produce a shading of the real object matching the desired illumination distribution. Certain areas in the painted image can be favored among others by weighting their importance in the optimization algorithm.

F. Anrys; P. Dutré

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Energy-efficient lighting for the home  

SciTech Connect

This is a guide to energy efficient residential lighting systems. Topics include discussion of the types of bulbs available; lighting basics about how light is produced; light quality; flicker and buzz of lighting systems; how to arrange the lights and which one goes where; additional hints on using lighting.

Byrne, J.

1994-11-01T23:59:59.000Z

442

Environmental Assessment for the National Synchrotron Light Source II at Brookhaven National Laboratory  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NATIONAL SYNCHROTRON LIGHT SOURCE-II NATIONAL SYNCHROTRON LIGHT SOURCE-II (NSLS-II) BROOKHAVEN NATIONAL LABORATORY UPTON, NEW YORK U. S. Department Of Energy Brookhaven Site Office September 2006 DOE/EA-1558 i TABLE OF CONTENTS 1.0 PREFACE....................................................................................................................1 2.0 SUMMARY .................................................................................................................2 3.0 PURPOSE AND NEED ............................................................................................10 4.0 DESCRIPTION OF ALTERNATIVES, INCLUDING THE PROPOSED ACTION.....................................................................................................................11

443

Solid-State Lighting: Presentations  

NLE Websites -- All DOE Office Websites (Extended Search)

Presentations to someone by Presentations to someone by E-mail Share Solid-State Lighting: Presentations on Facebook Tweet about Solid-State Lighting: Presentations on Twitter Bookmark Solid-State Lighting: Presentations on Google Bookmark Solid-State Lighting: Presentations on Delicious Rank Solid-State Lighting: Presentations on Digg Find More places to share Solid-State Lighting: Presentations on AddThis.com... Conferences & Meetings Presentations Publications Webcasts Videos Tools Presentations This page provides links to the presentations given at the DOE Solid-State Lighting Workshops, as well as links to reference materials. Some of the following documents are available as Adobe Acrobat PDFs. Download Adobe Reader. Workshop Presentations, Materials and Reports November 2013: Presentations from DOE SSL Market Introduction Workshop

444

Cornell University Electric Lighting Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Electric Lighting Quality Electric Lighting Quality The CUSD lighting design team utilized energy efficient products that meshed well with our daylighting scheme. We chose to use fluorescent tubes or compact fluorescent bulbs with an energy consumption of between 15 and 30 Watts throughout the house. The ballasts for all lamps dim to a 1% light output, so the interior and exterior lights can be adjusted as the level of available daylight fluctuates. Light sensors have been placed in front of our two largest apertures, allowing us to control how much artificial light is supplied to each space. The control of our ballasts is intricate, but refined and tested to avoid dysfunctional dimming or switching. While automatic controls are included, manual user overrides are provided in case the occupant prefers

445

Bremsstrahlung gamma rays from light Dark Matter  

E-Print Network (OSTI)

We discuss the often-neglected role of bremsstrahlung processes on the interstellar gas in computing indirect signatures of Dark Matter (DM) annihilation in the Galaxy, particularly for light DM candidates in the phenomenologically interesting O(10) GeV mass range. Especially from directions close to the Galactic Plane, the expected gamma-ray spectrum is altered via two effects: directly, by the photons emitted in the bremsstrahlung process on the interstellar gas by energetic electrons which are among the DM annihilation byproducts; indirectly, by the modification of the same electron spectrum, due to the additional energy loss process in the diffusion-loss equation (e.g. the resulting inverse Compton emission is altered). We quantify the importance of the bremsstrahlung emission in the GeV energy range, showing that it is the dominant component of the gamma-ray spectrum for some cases. We also find that, in regions in which bremsstrahlung dominates energy losses, the related gamma-ray emission is only moderately sensitive to possible large variations in the gas density. Still, we stress that, for computing precise spectra in the (sub-)GeV range, it is important to obtain a reliable description of the inner Galaxy gas distribution as well as to compute self-consistently the gamma emission and the solution to the diffusion-loss equation. For example, these are crucial issues to quantify and interpret meaningfully gamma-ray map `residuals' in terms of (light) DM annihilations.

Marco Cirelli; Pasquale D. Serpico; Gabrijela Zaharijas

2013-07-26T23:59:59.000Z

446

Light-Front Holography and QCD Hadronization at the Amplitude Level  

E-Print Network (OSTI)

Light-front holography allows hadronic amplitudes in the AdS/QCD fifth dimension to be mapped to frame-independent light-front wavefunctions of hadrons in physical space-time, thus providing a relativistic description of hadrons at the amplitude level. The AdS coordinate z is identified with an invariant light-front coordinate zeta which separates the dynamics of quark and gluon binding from the kinematics of constituent spin and internal orbital angular momentum. The result is a single-variable light-front Schrodinger equation for QCD which determines the eigenspectrum and the light-front wavefunctions of hadrons for general spin and orbital angular momentum. A new method for computing the hadronization of quark and gluon jets at the amplitude level using AdS/QCD light-front wavefunctions is outlined.

Stanley J. Brodsky; Guy de Teramond

2009-01-07T23:59:59.000Z

447

Data:43867b1d-9605-4f5f-bbbf-7f25a7ad4ec1 | Open Energy Information  

Open Energy Info (EERE)

d-9605-4f5f-bbbf-7f25a7ad4ec1 d-9605-4f5f-bbbf-7f25a7ad4ec1 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: City of Escanaba, Michigan (Utility Company) Effective date: 2012/07/01 End date if known: Rate name: Dusk to Dawn Small Lamp Sector: Lighting Description: It is understood that the service request will be for a period of not less than one (1) year, and that said service will be installed only on existing utility facilities. If a new pole is required, the customer will furnish the pole, and the City will install the pole. The monthly charges for dusk to dawn lighting service will be:

448

Avista Utilities (Electric) - Commercial Lighting Energy Efficiency...  

Open Energy Info (EERE)

Applicable Sector Commercial Eligible Technologies Lighting, Lighting ControlsSensors, LED Lighting Active Incentive Yes Implementing Sector Utility Energy Category Energy...

449

Ameren Illinois - Lighting Rebates for Businesses (Illinois)...  

Open Energy Info (EERE)

Technologies CustomOthers pending approval, Lighting, Lighting ControlsSensors, LED Exit Signs, LED Lighting Active Incentive Yes Implementing Sector Utility Energy...

450

Demand Responsive Lighting: A Scoping Study  

E-Print Network (OSTI)

2003 Data] Figure 9: Lighting Energy Usage for Commercialhas analyzed lighting energy usage across different buildings La Figure 9: Lighting Energy Usage for Commercial Building

Rubinstein, Francis; Kiliccote, Sila

2007-01-01T23:59:59.000Z

451

Wisconsin Power & Light Co | Open Energy Information  

Open Energy Info (EERE)

Power & Light Co (Redirected from Wisconsin Power and Light Company) Jump to: navigation, search Name Wisconsin Power & Light Co Place Madison, Wisconsin Utility Id 20856 Utility...

452

Background Overview of Solid-State Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

light sources Dramatic changes are unfolding in lighting technology. Semiconductor light-emitting diodes (LEDs), until recently used mainly as simple indicator lamps in...

453

`Electronic Eye' Improves Accuracy in Lighting  

Science Conference Proceedings (OSTI)

... candela standard will help the lighting industry meet ... a light source to a light detector as a ... manufacturers can still purchase standard bulbs from NIST ...

454

Federal Energy Management Program: Lighting Control Types  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting Control Types Characteristics of the most common lighting controls for offices and other public buildings are outlined below. Typical Lighting Control Applications...

455

Varon Lighting Group LLC | Open Energy Information  

Open Energy Info (EERE)

Varon Lighting Group LLC Jump to: navigation, search Name Varon Lighting Group LLC Place Chicago, Illinois Zip 60126 Product Chicago-based manufacturer of energy-efficient lighting...

456

Demand Responsive Lighting: A Scoping Study  

E-Print Network (OSTI)

3 3.0 Previous Experience with Demand Responsive Lighting11 4.3. Prevalence of Lighting13 4.4. Impact of Title 24 on Lighting

Rubinstein, Francis; Kiliccote, Sila

2007-01-01T23:59:59.000Z

457

LIGHTING CONTROLS: SURVEY OF MARKET POTENTIAL  

E-Print Network (OSTI)

REFERENCES Task Report to Lighting Systems Research,Berkeley Laboratory, "Lighting Control System Market1980). Task Report to Lighting Systems Research, Lawrence

Verderber, R.R.

2010-01-01T23:59:59.000Z

458

Ecological Consequences of Artificial Night Lighting  

E-Print Network (OSTI)

of Artificial Night Lighting Catherine Rich and Travisof artificial night lighting. This book provides editedage of modern urban lighting was ushered in. Coincidentally,

Piselli, Kathy

2006-01-01T23:59:59.000Z

459

Demand Responsive Lighting: A Scoping Study  

E-Print Network (OSTI)

Figure 9: Lighting Energy Usage for Commercial Buildinghas analyzed lighting energy usage across different buildings La Figure 9: Lighting Energy Usage for Commercial Building

Rubinstein, Francis; Kiliccote, Sila

2007-01-01T23:59:59.000Z

460

Philips Lumileds Lighting Co | Open Energy Information  

Open Energy Info (EERE)

of high-power LEDs and solid-state lighting solutions for automotive lighting, computer displays, LCD televisions, signs and signaling and architectural lighting. References...

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Measuring Light Reflectance of BGO Crystal Surfaces  

E-Print Network (OSTI)

Carlo program simulating light propagation in isotropic orTerms—Lambertian reflection, light collection, Monte Carloy-axis) and fraction specular light (right y- axis) for a

Janecek, Martin

2009-01-01T23:59:59.000Z

462

Light propagation and Imaging in Indefinite Metamaterials  

E-Print Network (OSTI)

photolithography by polarized light,” Applied PhysicsZhang, “Imaging visible light using anisotropic metamaterialcross-sectional review of the light propagation of TE mode (

Yao, Jie

2010-01-01T23:59:59.000Z

463

Controls for Solid-State Lighting  

E-Print Network (OSTI)

provide a low-energy “standby” light level while another,through high CRI LEDs for standby lighting in many interioruse LEDs today for standby lighting purposes. Conventional

Rubinstein, Francis

2007-01-01T23:59:59.000Z

464

Advanced Lighting Systems | Open Energy Information  

Open Energy Info (EERE)

Centre, Minnesota Zip 56378 Product Advanced Lighting Systems (ALS) provides a number of LED and fiber optic lighting solutions. It was acquired by Nexxus Lighting in September...

465

National Synchrotron Light Source  

NLE Websites -- All DOE Office Websites (Extended Search)

All Documents listed below are part of the Photon Sciences Directorate and All Documents listed below are part of the Photon Sciences Directorate and will be updated as needed. Photon Sciences ESH Standard Operating Procedures (SOPs) SOP No. Standard Operating Procedure for: LS-ES-0002 Procedure for Acid Etching of Silicon and Germanium Crystals LS-ESH-0004 NSLS Operations Group Chemical Spill and Gas Release Response LS-ESH-0010 VUV Injection Shutter LOTO LS-ESH-0012 LINAC LOTO LS-ESH-0013 Controlled Access to the VUV Ring LS-ESH-0014 Radiation Safety Interlocks at the National Synchrotron Light Source LS-ESH-0019 Beam Line Configuration Control Checklist Requirements LS-ESH-0020 Biosafety Requirements at the NSLS LS-ESH-0021 Biosafety Level 2 work at the NSLS/ A Technical Basis LS-ESH-0022 Beam Line Configuration Control Checklist Requirements

466

Light Meson Distribution Amplitudes  

E-Print Network (OSTI)

We calculated the first two moments of the light-cone distribution amplitudes for the pseudoscalar mesons ($\\pi$ and $K$) and the longitudinally polarised vector mesons ($\\rho$, $K^*$ and $\\phi$) as part of the UKQCD and RBC collaborations' $N_f=2+1$ domain-wall fermion phenomenology programme. These quantities were obtained with a good precision and, in particular, the expected effects of $SU(3)$-flavour symmetry breaking were observed. Operators were renormalised non-perturbatively and extrapolations to the physical point were made, guided by leading order chiral perturbation theory. The main results presented are for two volumes, $16^3\\times 32$ and $24^3\\times 64$, with a common lattice spacing. Preliminary results for a lattice with a finer lattice spacing, $32^3\\times64$, are discussed and a first look is taken at the use of twisted boundary conditions to extract distribution amplitudes.

R. Arthur; P. A. Boyle; D. Brömmel; M. A. Donnellan; J. M. Flynn; A. Jüttner; H. Pedroso de Lima; T. D. Rae; C. T. Sachrajda; B. Samways

2010-11-12T23:59:59.000Z

467

Light modulating device  

DOE Patents (OSTI)

In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity are disclosed. 1 fig.

Rauh, R.D.; Goldner, R.B.

1989-12-26T23:59:59.000Z

468

SITE ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT  

Science Conference Proceedings (OSTI)

The Site Electrical Power System receives and distributes utility power to all North Portal site users. The major North Portal users are the Protected Area including the subsurface facility and Balance of Plant areas. The system is remotely monitored and controlled from the Surface Operations Monitoring and Control System. The system monitors power quality and provides the capability to transfer between Off-Site Utility and standby power (including dedicated safeguards and security power). Standby power is only distributed to selected loads for personnel safety and essential operations. Security power is only distributed to essential security operations. The standby safeguards and security power is independent from all other site power. The system also provides surface lighting, grounding grid, and lightning protection for the North Portal. The system distributes power during construction, operation, caretaker, and closure phases of the repository. The system consists of substation equipment (disconnect switches, breakers, transformers and grounding equipment) and power distribution cabling from substation to the north portal switch gear building. Additionally, the system includes subsurface facility substation (located on surface), switch-gear, standby diesel generators, underground duct banks, power cables and conduits, switch-gear building and associated distribution equipment for power distribution. Each area substation distributes power to the electrical loads and includes the site grounding, site lighting and lightning protection equipment. The site electrical power system distributes power of sufficient quantity and quality to meet users demands. The Site Electrical Power System interfaces with the North Portal surface systems requiring electrical power. The system interfaces with the Subsurface Electrical Distribution System which will supply power to the underground facilities from the North Portal. Power required for the South Portal and development side activities of the subsurface facility will be provided at the South Portal by the Subsurface Electrical Distribution System. The Site Electrical Power System interfaces with the Off-Site Utility System for the receipt of power. The System interfaces with the Surface Operations Monitoring and Control System for monitoring and control. The System interfaces with MGR Site Layout System for the physical location of equipment and power distribution.

E.P. McCann

1999-04-16T23:59:59.000Z

469

Lighting Group: Sources and Ballasts: HID Lighting Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Ballasts and Controls for HID Lighting Ballasts and Controls for HID Lighting Systems Evaluation of Electronic Ballasts and Related Controls for HID Lighting Systems Objective HID ballast The goal of this project is to evaluate the potential of electronic ballasts and related controls for HID lighting systems to improve the efficiency of current technology. The specific objectives of this project are to: Test, analyze and determine the potential of electronic ballasts for HID lighting systems in cooperation with manufacturers as an emerging energy efficient technology to reduce lighting loads in commercial, industrial and municipal applications. Identify control strategies to further improve the energy efficiency of these systems with a municipal partner. Provide appropriate recommendations for incorporating these technologies into current state codes and regulations.

470

Tank Monitoring and Control System (TMACS) Version Description Document (VDD)  

SciTech Connect

This document updates the Version Description Document with the changes incorporated in the Revision 11.2 software installation on the Tank Monitor and Control System (TMACS).

BARNES, D.A.

2000-03-02T23:59:59.000Z

471

Microsoft Word - Tab 2d - Project Descriptions Press Format ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Project Descriptions Press Format - SAI TPPs - Final.doc More Documents & Publications Solar America Initiative Low Cost High Concentration PV Systems for Utility Power Generation...

472

Descriptions of Past Research: Generation Sector Nondestructive Evaluation  

Science Conference Proceedings (OSTI)

Descriptions of Past Research: Generation Sector Nondestructive Evaluation contains summaries of many past Electric Power Research Institute (EPRI) nondestructive evaluation (NDE) research and development (R&D) efforts.

2011-07-18T23:59:59.000Z

473

graphicsQC-package Quality Control for Graphics Description Details  

E-Print Network (OSTI)

Description The package provides functions to generate graphics files, compare them with “model” files, and report the results. License GPL-2

Stephen Gardiner; Paul Murrell; Maintainer Paul Murrell; Stephen Gardiner

2009-01-01T23:59:59.000Z

474

New Mexico Hydrogen Fuels Challenge Program Description The New...  

NLE Websites -- All DOE Office Websites (Extended Search)

New Mexico Hydrogen Fuels Challenge Program Description The New Mexico Hydrogen Fuels Challenge is an event that provides a hands-on opportunity for middle school students (grades...

475

Alternatives in light & space: rethinking public lighting in shared spaces.  

E-Print Network (OSTI)

?? This study reconsiders current public lighting design and suggests alternative practices that were determined through a case study involving a main street shopping strip. Using… (more)

Smitka, D

2011-01-01T23:59:59.000Z

476

Realistic Lighting in Autodesk Maya with Mental Ray Area Light.  

E-Print Network (OSTI)

?? The knowledge on how to create realistic lighting in computer graphics is one part that sets a realistic scene apart from one that can… (more)

Larsson, Nichlas

2012-01-01T23:59:59.000Z

477

Radioluminescent lighting for Alaskan runway lighting and marking  

SciTech Connect

Alaska and other far northern areas have special logistical, environmental, and economic problems that make radioluminescent (RL) lighting applications, especially in the area of airport lighting, an attractive alternative to electrical systems and flare pots. Tests and demonstrations of prototype systems conducted in Alaska over the past two years have proved the basic technological worth of RL airport lighting systems for civilian and military use. If regulatory issues and other factors identified during these tests can be favorably resolved and if the system and its components can be refined through production engineering, attractive applications for RL airfield lighting systems in Alaska and other remote locations could result.

Jensen, G.A.; Leonard, L.E.

1985-03-01T23:59:59.000Z

478

Solid-State Lighting: Solid-State Lighting Webcasts  

NLE Websites -- All DOE Office Websites (Extended Search)

environment to compare the performance of conventional fluorescent troffers with T8 LED tube retrofits, LED retrofit kits, and dedicated LED troffers. Adaptive Street Lighting...

479

Energy Savings Estimates of Light Emitting Diodes in Niche Lighting...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

in Niche Lighting Applications Prepared for: Building Technologies Program Office of Energy Efficiency and Renewable Energy U.S. Department of Energy Prepared by: Navigant...

480

Enhanced Light Extraction from Organic Light Emitting Diodes  

Ames Laboratory researchers have developed a soft lithography microlens fabrication and array that enables more efficient organic light emitting diodes (OLEDs), improving their commercial viability.

Note: This page contains sample records for the topic "lighting description dusk" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Solid-State Lighting: 2012 Solid-State Lighting Manufacturing...  

NLE Websites -- All DOE Office Websites (Extended Search)

Frank Cerio, Veeco Instruments Advanced Epi Tools for Gallium Nitride Light Emitting Diode Devices Vivek Agrawal, Applied Materials Driving Down HB-LED Costs:...

482

Light Sources Directorate Strategic Plan  

NLE Websites -- All DOE Office Websites (Extended Search)

Light Sources Directorate Light Sources Directorate Strategic Plan December 2009 Light Sources Directorate Strategic Plan December 2009 ii | Vision and Mission Light Sources Directorate Strategic Plan The VISION of the Light Sources Directorate is: to be a provider of choice for world-class photon science and facilities that deliver outstanding scientific productivity and impact, and to be recognized as a leader in developing innovative techniques and ap- plications of photon science Our MISSION is defined by the set of activities that are required to realize this vision: to advance scientific knowledge and to solve critical problems through the design, construction, operation, and use of premier photon science facilities | Table of Contents Light Sources Directorate Strategic Plan

483

Automatic Mechetronic Wheel Light Device  

DOE Patents (OSTI)

A wheel lighting device for illuminating a wheel of a vehicle to increase safety and enhance aesthetics. The device produces the appearance of a "ring of light" on a vehicle's wheels as the vehicle moves. The "ring of light" can automatically change in color and/or brightness according to a vehicle's speed, acceleration, jerk, selection of transmission gears, and/or engine speed. The device provides auxiliary indicator lights by producing light in conjunction with a vehicle's turn signals, hazard lights, alarm systems, and etc. The device comprises a combination of mechanical and electronic components and can be placed on the outer or inner surface of a wheel or made integral to a wheel or wheel cover. The device can be configured for all vehicle types, and is electrically powered by a vehicle's electrical system and/or battery.

Khan, Mohammed John Fitzgerald (Silver Spring, MD)

2004-09-14T23:59:59.000Z

484

Automatic Mechetronic Wheel Light Device  

SciTech Connect

A wheel lighting device for illuminating a wheel of a vehicle to increase safety and enhance aesthetics. The device produces the appearance of a "ring of light" on a vehicle's wheels as the vehicle moves. The "ring of light" can automatically change in color and/or brightness according to a vehicle's speed, acceleration, jerk, selection of transmission gears, and/or engine speed. The device provides auxiliary indicator lights by producing light in conjunction with a vehicle's turn signals, hazard lights, alarm systems, and etc. The device comprises a combination of mechanical and electronic components and can be placed on the outer or inner surface of a wheel or made integral to a wheel or wheel cover. The device can be configured for all vehicle types, and is electrically powered by a vehicle's electrical system and/or battery.

Khan, Mohammed John Fitzgerald (Silver Spring, MD)

2004-09-14T23:59:59.000Z

485

Analysis of light transport in scattering media  

E-Print Network (OSTI)

We propose a new method to analyze light transport in homogeneous scattering media. The incident light undergoes multiple bounces in translucent objects, and produces a complex light field. Our method analyzes the light ...

Mukaigawa, Yasuhiro

486

Solid-State Lighting: NewsDetail  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting: NewsDetail on Twitter Bookmark Solid-State Lighting: NewsDetail on Google Bookmark Solid-State Lighting: NewsDetail on Delicious Rank Solid-State Lighting:...

487

Energy Basics: Low-Pressure Sodium Lighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Low-Pressure Sodium Lighting Low-pressure sodium lighting provides more energy-efficient outdoor lighting than high-intensity discharge lighting, but it has very poor color...

488

Edmund G. Brown Jr. LIGHTING CALIFORNIA'S FUTURE  

E-Print Network (OSTI)

. Keywords: Solidstate lighting, LED, light emitting diode, indirect downlight, energy efficiency #12;viii, advanced light emitting diode downlighting system. Performance objectives included compliance with ENERGY an advanced light emitting diode downlight system, retooling the traditional downlight and optimizing

489

Automated Critical Peak Pricing Field Tests: Program Description and Results  

E-Print Network (OSTI)

Moderate Price (real-time) High Price (real-time) Note:Into EMCS Moderate Price (real-time) Indicator Light Same asIndication (optional) High Price (real-time) Indicator Light

Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila; Xu, Peng

2006-01-01T23:59:59.000Z

490

Stored light and released fiction  

E-Print Network (OSTI)

It is shown that the interpretation of the experimental results reported in the publication "Storage of Light in Atomic Vapor" by D.F.Phillips et al., Phys. Rev.Lett. 86, 783 (2001) [quant-ph/0012138] is incorrect. The experimental observation of this paper can be consistently explained in the framework of standard concepts of the physics of optical pumping and has nothing to do with "storage of light", or "dynamic reduction of the group velocity", or "light pulse compression".

Alexandrov, E B

2003-01-01T23:59:59.000Z

491

Stored light and released fiction  

E-Print Network (OSTI)

It is shown that the interpretation of the experimental results reported in the publication Storage of Light in Atomic Vapor" by D.F.Phillips et al., Phys. Rev.Lett. 86, 783 (2001) is incorrect. The experimental observation of this paper can be consistently explained in the framework of standard concepts of the physics of optical pumping and have nothing to do with "storage of light'', or "dynamic reduction of the group velocity'', or "light pulse compression''.

E. B. Alexandrov; V. S. Zapasskii

2003-04-29T23:59:59.000Z

492

Light-Like Noncommutativity, Light-Front Quantization and New Light on UV/IR Mixing  

E-Print Network (OSTI)

We revisit the problem of quantizing field theories on noncommutative Moyal spacetime with \\emph{light-like} noncommutativity. To tackle the issues arising from noncommuting and hence nonlocal time, we argue that for this case light-front quantization procedure should be employed. In this appropriate quantization scheme we perform the non-planar loop analysis for the light-like noncommutative field theories. One of the important and peculiar features of light-front quantization is that the UV cutoff of the light-cone Hamiltonian manifests itself as an IR cutoff for the light-cone momentum, $p^+$. Due to this feature, the naive results of covariant quantization for the light-like case allude to the absence of the UV/IR mixing in the light-front quantization. However, by a careful analysis of non-planar loop integrals we show that this is not the case and the UV/IR mixing persists. In addition, we argue in favour of the perturbative unitarity of light-like noncommutative field theories in the light-front quantization scheme.

M. M. Sheikh-Jabbari; A. Tureanu

2010-10-02T23:59:59.000Z

493

Lighting energy management: a comprehensive approach  

SciTech Connect

This article points out the difference between lighting energy management and lighting energy conservation. The goal of lighting energy conservation is to develop a lighting system which consumes less energy, and thus saves money. Lighting energy management recognizes that lighting was installed for a purpose, so the goal becomes attaining more of that purpose while minimizing waste. The benefits of lighting energy management can go far beyond operation and maintenance (O and M) cost savings. If the lighting system provides less light than is needed, and/or provides low quality lighting, then new light will improve productivity.

1983-04-01T23:59:59.000Z

494

EMC characteristics of lighting systems.  

E-Print Network (OSTI)

??[Truncated abstract] This thesis examines Electromagnetic Compatibility (EMC) characteristics of lighting systems. The issues examined have become more significant with the rapid development of both… (more)

Zegarac, Zoran

2013-01-01T23:59:59.000Z

495

Distributed Control for Smart Lighting.  

E-Print Network (OSTI)

??In this research, we investigate designing a smart lighting system. By extending and enhancing the centralized and distributed control algorithms we try to address the… (more)

Phadke, Swanand Shripad

2010-01-01T23:59:59.000Z

496

Charmonium and Light Meson Spectroscopy  

E-Print Network (OSTI)

This talk reviews recent experimental results on selected topics in the spectroscopy of charmonia, charmonium-like states and light mesons.

Kai Zhu

2012-12-10T23:59:59.000Z

497

Electronics, Lighting and Networks Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Electronics, Lighting and Networks Group NOTICE Due to the current lapse of federal funding, Berkeley Lab websites are accessible, but may not be updated until Congress approves...

498

Lighting Design By Simulated Annealing  

E-Print Network (OSTI)

In this paper, we present a lighting design framework for glossy real objects, starting from the reflectance field of an object. Using existing digital imaging software, the lighting designer paints the desired illumination distribution on a photograph of an object. This painted-on illumination is used to determine the light intensities which produce a shading of the real object matching the desired illumination distribution. Certain areas in the painted image can be favored among others by weighting their importance in the optimization algorithm. Our optimization algorithm is driven by a simulated annealing approach to find fixed-sized lighting combinations and accompagnying intensities.

F. Anrys; P. Dutré

2004-01-01T23:59:59.000Z

499

Columbia Water & Light- Solar Rebates  

Energy.gov (U.S. Department of Energy (DOE))

Columbia Water & Light (CWL) offers rebates to its commercial and residential customers for the purchase of solar water heaters and solar photovoltaic systems. These rebates are available for...

500

Integrated Envelope and Lighting Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency Program and Market Trends High Technology and Industrial Buildings Lighting Systems Residential Buildings Simulation Tools Sustainable Federal Operations Windows...