Powered by Deep Web Technologies
Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Qualitatitive description : light in the urban environment  

E-Print Network [OSTI]

The quality of our built environment is difficult to describe and to regulate; using light as an example, this thesis develops a descriptive framework using elementary, dynamic and connective forms. The combination of these ...

Stuebing, Susan

1986-01-01T23:59:59.000Z

2

SCE Classroom Lighting Guidelines 38 September 2004 Design Description  

E-Print Network [OSTI]

SCE Classroom Lighting Guidelines 38 September 2004 EXAMPLE 1 Design Description In this design, the ambient lighting system uses two, twenty foot of semi-indirect luminaires that are suspended in 2 rows electronic ballasts. The whiteboard task light is a linear wallwasher about 12 feet long that uses (3) Super

3

Project Application: Lie Theory and Applications Short description  

E-Print Network [OSTI]

Project Application: Lie Theory and Applications Short description Several lines of investigation. Approximations procedures on regular Fr´echet Lie groups aiming towards solving certain non-linear partial differential equations. We want to apply a new approximation procedure to nonlinear partial differential

Michor, Peter W.

4

VIRTUAL LIGHT: DIGITALLY-GENERATED LIGHTING FOR VIDEO CONFERENCING APPLICATIONS  

E-Print Network [OSTI]

VIRTUAL LIGHT: DIGITALLY-GENERATED LIGHTING FOR VIDEO CONFERENCING APPLICATIONS Andrea Basso method to improve the lighting conditions of a real scene or video sequence. In particular we concentrate on modifying real light sources intensities and inserting virtual lights into a real scene viewed from a fixed

Fisher, Kathleen

5

Light extraction from organic light-emitting diodes for lighting applications by sand-blasting  

E-Print Network [OSTI]

Light extraction from organic light-emitting diodes for lighting applications by sand@ust.hk Abstract: Light extraction from organic light-emitting diodes (OLEDs) by scattering the light is one of the effective methods for large-area lighting applications. In this paper, we present a very simple and cost

6

On relation between rest frame and light-front descriptions of quarkonium  

E-Print Network [OSTI]

In this paper we study the relation between the light-front (infinite momentum) and rest-frame descriptions of quarkonia. While the former is more convenient for high-energy production, the latter is usually used for the evaluation of charmonium properties. In particular, we discuss the dynamics of a relativistically moving system with nonrelativistic internal motion and give relations between rest frame and light-front potentials used for the description of quarkonium states. We consider two approximations, first the small coupling regime, and next the nonperturbative small binding energy approximation. In both cases we get consistent results. Our results could be relevant for the description of final state interactions in a wide class of processes, including quarkonium production on nuclei and plasma. Moreover, they can be extended to the description of final state interactions in the production of weakly bound systems, such as for example the deuteron.

B. Z. Kopeliovich; E. Levin; Ivan Schmidt; M. Siddikov

2015-01-07T23:59:59.000Z

7

On relation between rest frame and light-front descriptions of quarkonium  

E-Print Network [OSTI]

In this paper we study the relation between the light-front (infinite momentum) and rest-frame descriptions of quarkonia. While the former is more convenient for high-energy production, the latter is usually used for the evaluation of charmonium properties. In particular, we discuss the dynamics of a relativistically moving system with nonrelativistic internal motion and give relations between rest frame and light-front potentials used for the description of quarkonium states. We consider two approximations, first the small coupling regime, and next the nonperturbative small binding energy approximation. In both cases we get consistent results. Our results could be relevant for the description of final state interactions in a wide class of processes, including quarkonium production on nuclei and plasma. Moreover, they can be extended to the description of final state interactions in the production of weakly bound systems, such as for example the deuteron.

Kopeliovich, B Z; Schmidt, Ivan; Siddikov, M

2015-01-01T23:59:59.000Z

8

Universality of electron distributions in high-energy air showers - description of Cherenkov light production  

E-Print Network [OSTI]

The shower simulation code CORSIKA has been used to investigate the electron energy and angular distributions in high-energy showers. Based on the universality of both distributions, we develop an analytical description of Cherenkov light emission in extensive air showers, which provides the total number and angular distribution of photons. The parameterisation can be used e.g. to calculate the contribution of direct and scattered Cherenkov light to shower profiles measured with the air fluorescence technique.

F. Nerling; J. Blümer; R. Engel; M. Risse

2005-12-22T23:59:59.000Z

9

Description  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phasesData FilesShape, Density, and Morphologyusing TD-DFT. |Description

10

Demonstrating LED and Fiber Optic Lighting in Commissary Applications  

Broader source: Energy.gov [DOE]

Presentation—given at the Federal Utility Partnership Working Group (FUPWG) Fall 2008 meeting—covers goals of the project and applications for light-emitting diodes (LEDs) and fiber optic lighting.

11

Energy Recovery Linacs for Light Source Applications  

SciTech Connect (OSTI)

Energy Recovery Linacs are being considered for applications in present and future light sources. ERLs take advantage of the continuous operation of superconducting rf cavities to accelerate high average current beams with low losses. The electrons can be directed through bends, undulators, and wigglers for high brightness x ray production. They are then decelerated to low energy, recovering power so as to minimize the required rf drive and electrical draw. When this approach is coupled with advanced continuous wave injectors, very high power, ultra-short electron pulse trains of very high brightness can be achieved. This paper will review the status of worldwide programs and discuss the technology challenges to provide such beams for photon production.

George Neil

2011-04-01T23:59:59.000Z

12

Evaluation of Alternative Field Buses for Lighting Control Applications  

E-Print Network [OSTI]

2003, Jose Gutierrez, Eaton Corporation March 22, 2005 PageBuses for Lighting Control Applications Eaton CorporationEaton Corporation is a global $7.3 billion diversified

Koch, Ed; Rubinstein, Francis

2005-01-01T23:59:59.000Z

13

2D Static Light Scattering for Dairy Based Applications  

E-Print Network [OSTI]

2D Static Light Scattering for Dairy Based Applications Jacob Lercke Skytte Kongens Lyngby 2014 Ph information on the microstructure. The second paper makes a direction comparison between the light scattering a recently introduced light scattering tech- nique. The system setup of the technique is highly flexible

14

Light beams with general direction and polarization: global description and geometric phase  

E-Print Network [OSTI]

We construct the manifold describing the family of plane monochromatic light waves with all directions, polarizations, phases and intensities. A smooth description of polarization, valid over the entire sphere S^2 of directions, is given through the construction of an orthogonal basis pair of complex polarization vectors for each direction; any light beam is then uniquely and smoothly specified by giving its direction and two complex amplitudes. This implies that the space of all light beams is the six dimensional manifold S^2 X C^2, the Cartesian product of a sphere and a two dimensional complex vector space. A Hopf map (i.e mapping the two complex amplitudes to the Stokes parameters) then leads to the four dimensional manifold S^2 X S^2 which describes beams with all directions and polarization states. This product of two spheres can be viewed as an ordered pair of two points on a single sphere, in contrast to earlier work in which the same system was represented using Majorana's mapping of the states of a spin one quantum system to an unordered pair of points on a sphere. This is a different manifold, CP^2, two dimensional complex projective space, which does not faithfully represent the full space of all directions and polarizations. Following the now-standard framework, we exhibit the fibre bundle whose total space is the set of all light beams of non-zero intensity, and base space S^2 X S^2. We give the U(1) connection which determines the geometric phase as the line integral of a one-form along a closed curve in the total space. Bases are classified as globally smooth, global but singular, and local, with the last type of basis being defined only when the curve traversed by the system is given. Existing as well as new formulae for the geometric phase are presented in this overall framework.

R. Nityananda; S. Sridhar

2012-12-05T23:59:59.000Z

15

Theoretical Description of Heavy Impurity Transport and its Application to the Modelling of Tungsten in JET and ASDEX Upgrade  

E-Print Network [OSTI]

Theoretical Description of Heavy Impurity Transport and its Application to the Modelling of Tungsten in JET and ASDEX Upgrade

16

Microencapsulated Fuel Technology for Commercial Light Water and Advanced Reactor Application  

SciTech Connect (OSTI)

The potential application of microencapsulated fuels to light water reactors (LWRs) has been explored. The specific fuel manifestation being put forward is for coated fuel particles embedded in silicon carbide or zirconium metal matrices. Detailed descriptions of these concepts are presented, along with a review of attributes, potential benefits, and issues with respect to their application in LWR environments, specifically from the standpoints of materials, neutronics, operations, and economics. Preliminary experiment and modeling results imply that with marginal redesign, significant gains in operational reliability and accident response margins could be potentially achieved by replacing conventional oxide-type LWR fuel with microencapsulated fuel forms.

Terrani, Kurt A [ORNL; Snead, Lance Lewis [ORNL; Gehin, Jess C [ORNL

2012-01-01T23:59:59.000Z

17

Multiple description transform codes with an application to packetized speech  

E-Print Network [OSTI]

) and for 8 = 3. Comparison of the simulation and the theoretical results. 25 10 Multiple Description Transform Coder. Er, Ez, . . . , Et are ECMDSQ encoders for the transform coefficients, Dr, Dz, . . . , Dc are ECMDSQ decoders. 27 12 Slope A... of the location at which 21 lies). 7 11 10 12 13 15 16 17 21 14 18 20 22 26 19 23 25 27 31 24 28 29 30 32 33 34 Fig. 2. Example of index assignment, 2k + 1 = 5, As previously stated, the central encoder is described by a vector of thresholds (tp, tr...

Batllo, Jean-Christophe Claude

2012-06-07T23:59:59.000Z

18

Residential Advisor Application 2014/15 Please read the job description and application process thoroughly, as your  

E-Print Network [OSTI]

Residential Advisor Application 2014/15 Please read the job description and application process the reasons why you want to become an RA and what skills you would bring to the Residential Advisor team. 2 preferred residential areas (e.g. York House, off Campus, East Slope) for your placement and your student

Sussex, University of

19

Nonlinear Trellis Description for Convolutionally Encoded Transmission Over ISI-channels with Applications for CPM  

E-Print Network [OSTI]

In this paper we propose a matched decoding scheme for convolutionally encoded transmission over intersymbol interference (ISI) channels and devise a nonlinear trellis description. As an application we show that for coded continuous phase modulation (CPM) using a non-coherent receiver the number of states of the super trellis can be significantly reduced by means of a matched non-linear trellis encoder.

Schuh, Fabian

2012-01-01T23:59:59.000Z

20

Modeling bronchial circulation with application to soluble gas exchange: description and sensitivity analysis  

E-Print Network [OSTI]

Modeling bronchial circulation with application to soluble gas exchange: description into an existing model that describes the simul- taneous exchange of heat, water, and a soluble gas in the airways and represents an avenue to understanding the ex- change process. The soluble gas used in the model simulations

George, Steven C.

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Evaluation of Light-Triggered Thyristors for Pulsed Power Applications  

SciTech Connect (OSTI)

Lawrence Livermore National Laboratory has many needs for high reliability, high peak current, high di/dt switches. Solid-state switch technology offers the demonstrated advantage of reliability under a variety of conditions. Light-triggered switches operate with a reduced susceptibility to electromagnetic interference commonly found within pulsed power environments. Despite the advantages, commercially available solid-state switches are not typically designed for the often extreme pulsed power requirements. Testing was performed to bound the limits of devices for pulsed power applications beyond the manufacturers specified ratings. To test the applicability of recent commercial light-triggered solid-state designs, an adjustable high current switch test stand was assembled. Results from testing and subsequent selected implementations are presented.

Tully, L K; Fulkerson, E S; Goerz, D A; Speer, R D

2008-05-20T23:59:59.000Z

22

Design & Development of e-TurboTM for SUV and Light Truck Applications...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

& Development of e-TurboTM for SUV and Light Truck Applications Design & Development of e-TurboTM for SUV and Light Truck Applications 2003 DEER Conference Presentation: Garrett...

23

Design and Development of e-Turbo for SUV and Light Truck Applications...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Development of e-Turbo for SUV and Light Truck Applications Design and Development of e-Turbo for SUV and Light Truck Applications 2004 Diesel Engine Emissions Reduction (DEER)...

24

Central-moment description of polarization for quantum states of light  

E-Print Network [OSTI]

We present a moment expansion method for the systematic characterization of the polarization properties of quantum states of light. Specifically, we link the method to the measurements of the Stokes operator in different directions on the Poincar\\'{e} sphere, and provide a method of polarization tomography without resorting to full state tomography. We apply these ideas to the experimental first- and second-order polarization characterization of some two-photon quantum states. In addition, we show that there are classes of states whose polarization characteristics are dominated not by their first-order moments (i.e., the Stokes vector) but by higher-order polarization moments.

G. Björk; J. Söderholm; Y. -S. Kim; Y. -S. Ra; H. -T. Lim; C. Kothe; Y. -H. Kim; L. L. Sánchez-Soto; A. B. Klimov

2012-01-19T23:59:59.000Z

25

Uv-Light Stabilization Additive Package For Solar Cell Module And Laminated Glass Applications  

DOE Patents [OSTI]

An ultraviolet light stabilization additive package is used in an encapsulant material that may be used in solar cell modules, laminated glass and a variety of other applications. The ultraviolet light stabilization additive package comprises a first hindered amine light stabilizer and a second hindered amine light stabilizer. The first hindered amine light stabilizer provides thermal oxidative stabilization, and the second hindered amine light stabilizer providing photo-oxidative stabilization.

Hanoka, Jack I. (Brookline, MA); Klemchuk, Peter P. (Watertown, CT)

2002-03-05T23:59:59.000Z

26

Evaluation of Alternative Field Buses for Lighting ControlApplications  

SciTech Connect (OSTI)

The Subcontract Statement of Work consists of two major tasks. This report is the Final Report in fulfillment of the contract deliverable for Task 1. The purpose of Task 1 was to evaluate existing and emerging protocols and standards for interfacing sensors and controllers for communicating with integrated lighting control systems in commercial buildings. The detailed task description follows: Task 1. Evaluate alternative sensor/field buses. The objective of this task is to evaluate existing and emerging standards for interfacing sensors and controllers for communicating with integrated lighting control systems in commercial buildings. The protocols to be evaluated will include at least: (1) 1-Wire Net, (2) DALI, (3) MODBUS (or appropriate substitute such as EIB) and (4) ZigBee. The evaluation will include a comparative matrix for comparing the technical performance features of the different alternative systems. The performance features to be considered include: (1) directionality and network speed, (2) error control, (3) latency times, (4) allowable cable voltage drop, (5) topology, and (6) polarization. Specifically, Subcontractor will: (1) Analyze the proposed network architecture and identify potential problems that may require further research and specification. (2) Help identify and specify additional software and hardware components that may be required for the communications network to operate properly. (3) Identify areas of the architecture that can benefit from existing standards and technology and enumerate those standards and technologies. (4) Identify existing companies that may have relevant technology that can be applied to this research. (5) Help determine if new standards or technologies need to be developed.

Koch, Ed; Rubinstein, Francis

2005-03-21T23:59:59.000Z

27

Multi-Applications Small Light Water Reactor - NERI Final Report  

SciTech Connect (OSTI)

The Multi-Application Small Light Water Reactor (MASLWR) project was conducted under the auspices of the Nuclear Energy Research Initiative (NERI) of the U.S. Department of Energy (DOE). The primary project objectives were to develop the conceptual design for a safe and economic small, natural circulation light water reactor, to address the economic and safety attributes of the concept, and to demonstrate the technical feasibility by testing in an integral test facility. This report presents the results of the project. After an initial exploratory and evolutionary process, as documented in the October 2000 report, the project focused on developing a modular reactor design that consists of a self-contained assembly with a reactor vessel, steam generators, and containment. These modular units would be manufactured at a single centralized facility, transported by rail, road, and/or ship, and installed as a series of self-contained units. This approach also allows for staged construction of an NPP and ''pull and replace'' refueling and maintenance during each five-year refueling cycle.

S. Michale Modro; James E. Fisher; Kevan D. Weaver; Jose N. Reyes, Jr.; John T. Groome; Pierre Babka; Thomas M. Carlson

2003-12-01T23:59:59.000Z

28

Application of chiral nuclear forces to light nuclei  

E-Print Network [OSTI]

In these proceedings, we discuss the current status of nuclear bound state predictions based on chiral nuclear interactions. Results of ordinary $s$- and $p$-shell nuclei and light hypernuclei are shown.

A. Nogga

2007-12-20T23:59:59.000Z

29

Energy Saving and Good Quality Lighting for Indoor Applications  

E-Print Network [OSTI]

with extremely high lamp efficacies, silver-coated aluminum lamellae optics for high luminares efficiency, as well as highly efficient electronic gear take care that the energy consumption is decreasing up to 40%, while the light quality is improving. Latest...

Lange, H.

2008-01-01T23:59:59.000Z

30

Blue-green and green phosphors for lighting applications  

DOE Patents [OSTI]

Embodiments of the present techniques provide a related family of phosphors that may be used in lighting systems to generate blue or blue-green light. The phosphors include systems having a general formula of: ((Sr.sub.1-zM.sub.z).sub.1-(x+w)A.sub.wCe.sub.x).sub.3(Al.sub.1-ySi.s- ub.y)O.sub.4+y+3(x-w)F.sub.1-y-3(x-w) (I), wherein 0lighting systems, such as LEDs and fluorescent tubes, among others, to produce blue and blue/green light. Further, the phosphors may be used in blends with other phosphors, or in combined lighting systems, to produce white light suitable for illumination.

Setlur, Anant Achyut; Chandran, Ramachandran Gopi; Henderson, Claire Susan; Nammalwar, Pransanth Kumar; Radkov, Emil

2012-12-11T23:59:59.000Z

31

Multi-Application Small Light Water Reactor Final Report  

SciTech Connect (OSTI)

The Multi-Application Small Light Water Reactor (MASLWR) project was conducted under the auspices of the Nuclear Energy Research Initiative (NERI) of the U.S. Department of Energy (DOE). The primary project objectives were to develop the conceptual design for a safe and economic small, natural circulation light water reactor, to address the economic and safety attributes of the concept, and to demonstrate the technical feasibility by testing in an integral test facility. This report presents the results of the project. After an initial exploratory and evolutionary process, as documented in the October 2000 report, the project focused on developing a modular reactor design that consists of a self-contained assembly with a reactor vessel, steam generators, and containment. These modular units would be manufactured at a single centralized facility, transported by rail, road, and/or ship, and installed as a series of self-contained units. This approach also allows for staged construction of an NPP and ''pull and replace'' refueling and maintenance during each five-year refueling cycle. Development of the baseline design concept has been sufficiently completed to determine that it complies with the safety requirements and criteria, and satisfies the major goals already noted. The more significant features of the baseline single-unit design concept include: (1) Thermal Power--150 MWt; (2) Net Electrical Output--35 MWe; (3) Steam Generator Type--Vertical, helical tubes; (4) Fuel UO{sub 2}, 8% enriched; (5) Refueling Intervals--5 years; (6) Life-Cycle--60 years. The economic performance was assessed by designing a power plant with an electric generation capacity in the range of current and advanced evolutionary systems. This approach allows for direct comparison of economic performance and forms a basis for further evaluation, economic and technical, of the proposed design and for the design evolution towards a more cost competitive concept. Applications such as cogeneration, water desalination or district heating were not addressed directly in the economic analyses since these depend more on local conditions, demand and economy and can not be easily generalized. Current economic performance experience and available cost data were used. The preliminary cost estimate, based on a concept that could be deployed in less than a decade, is: (1) Net Electrical Output--1050 MWe; (2) Net Station Efficiency--23%; (3) Number of Power Units--30; (4) Nominal Plant Capacity Factor--95%; (5) Total capital cost--$1241/kWe; and (6) Total busbar cost--3.4 cents/kWh. The project includes a testing program that has been conducted at Oregon State University (OSU). The test facility is a 1/3-height and 1/254.7 volume scaled design that will operate at full system pressure and temperature, and will be capable of operation at 600 kW. The design and construction of the facility have been completed. Testing is scheduled to begin in October 2002. The MASLWR conceptual design is simple, safe, and economical. It operates at NSSS parameters much lower than for a typical PWR plant, and has a much simplified power generation system. The individual reactor modules can be operated as on/off units, thereby limiting operational transients to startup and shutdown. In addition, a plant can be built in increments that match demand increases. The ''pull and replace'' concept offers automation of refueling and maintenance activities. Performing refueling in a single location improves proliferation resistance and eliminates the threat of diversion. Design certification based on testing is simplified because of the relatively low cost of a full-scale prototype facility. The overall conclusion is that while the efficiency of the power generation unit is much lower (23% versus 30%), the reduction in capital cost due to simplification of design more than makes up for the increased cost of nuclear fuel. The design concept complies with the safety requirements and criteria. It also satisfies the goals for modularity, standard plant design, certification before construction, c

Modro, S.M.; Fisher, J.E.; Weaver, K.D.; Reyes, J.N.; Groome, J.T.; Babka, P.; Carlson, T.M.

2003-12-01T23:59:59.000Z

32

MIME 6740/8740 Optimization Theory and Applications Fall 2014 Description: The course will cover fundamental concepts of optimization and numerical  

E-Print Network [OSTI]

MIME 6740/8740 Optimization Theory and Applications Fall 2014 ________________________________________________________________________________________ Description: The course will cover fundamental concepts of optimization and numerical methods for solving optimization problems. It will present applications of optimization in mechanical and industrial engineering

Nikolaidis, Efstratios

33

Medical Applications of Space Light-Emitting Diode Technology--Space Station and Beyond  

SciTech Connect (OSTI)

Space light-emitting diode (LED) technology has provided medicine with a new tool capable of delivering light deep into tissues of the body, at wavelengths which are biologically optimal for cancer treatment and wound healing. This LED technology has already flown on Space Shuttle missions, and shows promise for wound healing applications of benefit to Space Station astronauts.

Whelan, H.T.; Houle, J.M.; Donohoe, D.L.; Bajic, D.M.; Schmidt, M.H.; Reichert, K.W.; Weyenberg, G.T.; Larson, D.L.; Meyer, G.A.; Caviness, J.A.

1999-06-01T23:59:59.000Z

34

Blue-green phosphor for fluorescent lighting applications  

DOE Patents [OSTI]

A fluorescent lamp including a phosphor layer including Sr.sub.4 Al.sub.14 O.sub.25 :Eu.sup.2+ (SAE) and at least one of each of a red, green and blue emitting phosphor. The phosphor layer can optionally include an additional, deep red phosphor and a yellow emitting phosphor. The resulting lamp will exhibit a white light having a color rendering index of 90 or higher with a correlated color temperature of from 2500 to 10000 Kelvin. The use of SAE in phosphor blends of lamps results in high CRI light sources with increased stability and acceptable lumen maintenance over, the course of the lamp life.

Srivastava, Alok; Comanzo, Holly; Manivannan, Venkatesan; Setlur, Anant Achyut

2005-03-15T23:59:59.000Z

35

Application of geostatistical reservoir description for maximizing waterflood infill drilling recovery from La Cira Field, Colombia  

E-Print Network [OSTI]

One of the prospective ways to increase the oil production is to maximize the oil recovery from mature oil fields. In this study we apply an integrated approach that combines geostatistical reservoir description and reservoir simulation to evaluate...

Cubillos Gutierrez, Helber

1995-01-01T23:59:59.000Z

36

An application of the multiple description scalar quantizer to speech coding on correlated fading channels  

E-Print Network [OSTI]

utilizing multiple description scalar quantizers (MDSQ) for correlated Rayleigh fading channels. In this thesis, we construct two different types of MDSQ-based systems: a fixed length coding system and a variable length coding system. Both employ...

Kintzley, Keith Russell

1995-01-01T23:59:59.000Z

37

Visible light photon counters optimization for quantum information applications  

SciTech Connect (OSTI)

In this paper we describe the studies of the main parameters needed for optimal operation of Visible Light Photon Counters (VLPCs) when used in quantum information systems. The isolation of the single photon signal is analyzed through the definition of a contamination parameter. A compromise in the minimization of this parameter for temperature, bias voltage and dark count variation must be achieved and this depends on the experimental conditions.

Molina, J.; /Rio de Janeiro State U.; Estrada, J.; Bross, A.; /Fermilab; Ginther, G.; /Rochester U.; Buscher, V.; /Freiburg U.

2006-10-01T23:59:59.000Z

38

Energymaster Desiccant System Application to Light Commercial Buildings  

E-Print Network [OSTI]

Desiccant cooling systems offer unique advantages over conventional equipment in certain applications. AskCorp's Energymaster unit has been applied in several commercial situations where these advantages are most significant. The magnitude...

Blanpied, M. C.; Coellner, J. A.; Macintosh, D. S.

1987-01-01T23:59:59.000Z

39

Local tuning of organic light-emitting diode color by dye droplet application  

E-Print Network [OSTI]

Local tuning of organic light-emitting diode color by dye droplet application T. R. Hebner and J. C 1998 We have demonstrated that fluorescent dyes may be introduced into previously fabricated polymer thin films by local application of a dye-containing droplet. The UV fluorescence spectra of the films

40

White Light Emitting Diode Development for General Illumination Applications  

SciTech Connect (OSTI)

This report contains a summary of technical achievements during a 3-year project aimed at developing the chip and packaging technology necessary to demonstrate efficient, high flux light-emitting diode (LED) arrays using Cree's gallium nitride/silicon carbide (GaN/SiC) LED technology as the starting point. Novel chip designs and fabrication processes are described that led to high power blue LEDs that achieved 310 mW of light output at 350 mA drive current, corresponding to quantum and wall plug efficiencies of 32.5% and 26.5%, respectively. When combined with phosphor, high power white LEDs with luminous output of 67 lumens and efficacy of 57 lumens per watt were also demonstrated. Advances in packaging technology are described that enabled compact, multi-chip white LED lamp modules with 800-1000 lumens output at efficacies of up to 55 lumens per watt. Lamp modules with junction-to-ambient thermal resistance as low as 1.7 C/watt have also been demonstrated.

James Ibbetson

2006-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Light Scattering Problem and its Application in Atmospheric Science  

E-Print Network [OSTI]

of the single-scattering properties of individual dust-like aerosol particles. The second part of this thesis describes this database in detail. Its application to radiative transfer calculations in a spectral region from ultraviolet (UV) to far-infrared (far...

Meng, Zhaokai

2011-02-22T23:59:59.000Z

42

Electric Boosting System for Light Truck/SUV Application  

SciTech Connect (OSTI)

Turbo diesel engine use in passenger cars in Europe has resulted in 30-50% improvement in fuel economy. Diesel engine application is particularly suitable for US because of vehicle size and duty cycle patterns. Adopting this technology for use in the US presents two issues--emissions and driveability. Emissions reduction technology is being well addressed with advanced turbocharging, fuel injection and catalytic aftertreatment systems. One way to address driveability is to eliminate turbo lag and increase low speed torque. Electrically assisted turbocharging concepts incorporated in e-TurboTM designs do both. The purpose of this project is to design and develop an electrically assisted turbocharger, e-TurboTM, for diesel engine use in the US. In this report, early design and development of electrical assist technology is described together with issues and potential benefits. In this early phase a mathematical model was developed and verified. The model was used in a sensitivity study. The results of the sensitivity study together with the design and test of first generation hardware was fed into second generation designs. In order to fully realize the benefits of electrical assist technology it was necessary to expand the scope of work to include technology on the compressor side as well as electronic controls concepts. The results of the expanded scope of work are also reported here. In the first instance, designs and hardware were developed for a small engine to quantify and demonstrate benefits. The turbo size was such that it could be applied in a bi-turbo configuration to an SUV sized V engine. Mathematical simulation was used to quantify the possible benefits in an SUV application. It is shown that low speed torque can be increased to get the high performance expected in US, automatic transmission vehicles. It is also shown that e-TurboTM can be used to generate modest amounts of electrical power and supplement the alternator under most load-speed conditions. It is shown that a single (large) e-TurboTM consumes slightly less electrical power for the same steady state torque shaping than a bi-Turbo configuration. However, the transient response of a bi-Turbo configuration in slightly better. It was shown that in order to make full use of additional capabilities of e-TurboTM wide compressor flow range is required. Variable geometry compressor (VGC) technology developed under a separate project was evaluated for incorporation into e-TurboTM designs. It was shown that the combination of these two technologies enables very high torque at low engine speeds. Designs and hardware combining VGC and e-TurboTM are to be developed in a future project. There is concern about high power demands (even though momentary) of e-TurboTM. Reducing the inertia of the turbocharger can reduce power demand and increase battery life. Low inertia turbocharger technology called IBT developed under a separate project was evaluated for synergy with e-TurboTM designs. It was concluded that inertial reduction provided by IBT is very beneficial for e-TurboTM. Designs and hardware combining IBT and e-TurboTM are to be developed in a future project. e-TurboTM provides several additional flexibilities including exhaust gas recirculation (EGR) for emissions reduction with minimum fuel economy penalty and exhaust temperature control for aftertreatment. In integrated multi-parameter control system is needed to realize the full potential of e-TurboTM performance. Honeywell expertise in process control systems involving hundreds of sensors and actuators was applied to demonstrate the potential benefits of multi-parameter, model based control systems.

Steve Arnold, Craig Balis, Pierre Barthelet, Etienne Poix, Tariq Samad, Greg Hampson, S.M. Shahed

2005-06-22T23:59:59.000Z

43

Solvent-enhanced dye diffusion in polymer thin films for polymer light-emitting diode application  

E-Print Network [OSTI]

Solvent-enhanced dye diffusion in polymer thin films for polymer light-emitting diode application 2004; accepted 24 August 2004) The method of solvent-enhanced dye diffusion for patterning full dry transfer of dye onto a device polymer film, the dye remains on the surface of the polymer layer

44

Application of fractal theory in refined reservoir description for EOR pilot area  

SciTech Connect (OSTI)

A reliable reservoir description is essential to investigate scenarios for successful EOR pilot test. Reservoir characterization includes formation composition, permeability, porosity, reservoir fluids and other petrophysical parameters. In this study, various new tools have been applied to characterize Kilamayi conglomerate formation. This paper examines the merits of various statistical methods for recognizing rock property correlation in vertical columns and gives out methods to determine fractal dimension including R/S analysis and power spectral analysis. The paper also demonstrates that there is obvious fractal characteristics in conglomerate reservoirs of Kilamayi oil fields. Well log data in EOR pilot area are used to get distribution profile of parameters including permeability, porosity, water saturation and shale content.

Yue Li; Yonggang Duan; Yun Li; Yuan Lu

1997-08-01T23:59:59.000Z

45

Method to produce nanocrystalline powders of oxide-based phosphors for lighting applications  

DOE Patents [OSTI]

Some embodiments of the present invention are directed toward nanocrystalline oxide-based phosphor materials, and methods for making same. Typically, such methods comprise a steric entrapment route for converting precursors into such phosphor material. In some embodiments, the nanocrystalline oxide-based phosphor materials are quantum splitting phosphors. In some or other embodiments, such nanocrystalline oxide based phosphor materials provide reduced scattering, leading to greater efficiency, when used in lighting applications.

Loureiro, Sergio Paulo Martins (Saratoga Springs, NY); Setlur, Anant Achyut (Niskayuna, NY); Williams, Darryl Stephen (Clifton Park, NY); Manoharan, Mohan (Niskayuna, NY); Srivastava, Alok Mani (Niskayuna, NY)

2007-12-25T23:59:59.000Z

46

Synthesis and optical properties of cadmium selenide quantum dots for white light-emitting diode application  

SciTech Connect (OSTI)

Highlights: ? Stable CdSe QDs were synthesized by the one-step and two-level process respectively. ? The fabricated white LEDs show good white balance. ? CdSe QDs present well green to yellow band luminescence. ? CdSe QDs displayed a broad excitation band. - Abstract: Yellow light-emitting cadmium selenide quantum dots were synthesized using one-step and two-step methods in an aqueous medium. The structural luminescent properties of these quantum dots were investigated. The obtained cadmium selenide quantum dots displayed a broad excitation band suitable for blue or near-ultraviolet light-emitting diode applications. White light-emitting diodes were fabricated by coating the cadmium selenide samples onto a 460 nm-emitting indium gallium nitrite chip. Both samples exhibited good white balance. Under a 20 mA working current, the white light-emitting diode fabricated via the one-step and two-step methods showed Commission Internationale de l’Éclairage coordinates at (0.27, 0.23) and (0.27, 0.33), respectively, and a color rendering index equal to 41 and 37, respectively. The one-step approach was simpler, greener, and more effective than the two-step approach. The one-step approach can be enhanced by combining cadmium selenide quantum dots with proper phosphors.

Xu, Xianmei; Wang, Yilin; Gule, Teri; Luo, Qiang [School of Chemistry and Chemical Engineering, Guangxi University, Nanning 53000 (China); Zhou, Liya, E-mail: zhouliyatf@163.com [School of Chemistry and Chemical Engineering, Guangxi University, Nanning 53000 (China); Gong, Fuzhong [School of Chemistry and Chemical Engineering, Guangxi University, Nanning 53000 (China)

2013-03-15T23:59:59.000Z

47

TECHNOLOGY DATA CHARACTERIZING LIGHTING IN COMMERCIAL BUILDINGS: APPLICATION TO END-USE FORECASTING WITH COMMEND 4.0  

E-Print Network [OSTI]

LBL-34243 UC - 1600 TECHNOLOGY DATA CHARACTERIZING LIGHTING IN COMMERCIAL BUILDINGS: APPLICATION Technologies, and the Office of Environmental Analysis, Office of Policy, Planning, and Analysis of the U.S. Department of Energy under Contract No. DE-AC03-76SF00098. #12;Technology Data Characterizing Lighting

48

Application of Developed APCVD Transparent Conducting Oxides and Undercoat Technologies for Economical OLED Lighting  

SciTech Connect (OSTI)

Economics is a key factor for application of organic light emitting diodes (OLED) in general lighting relative to OLED flat panel displays that can handle high cost materials such as indium tin oxide (ITO) or Indium zinc oxide (IZO) as the transparent conducting oxide (TCO) on display glass. However, for OLED lighting to penetrate into general illumination, economics and sustainable materials are critical. The issues with ITO have been documented at the DOE SSL R&D and Manufacturing workshops for the last 5 years and the issue is being exacerbated by export controls from China (one of the major sources of elemental indium). Therefore, ITO is not sustainable because of the fluctuating costs and the United States (US) dependency on other nations such as China. Numerous alternatives to ITO/IZO are being evaluated such as Ag nanoparticles/nanowires, carbon nanotubes, graphene, and other metal oxides. Of these other metal oxides, doped zinc oxide has attracted a lot of attention over the last 10 years. The volume of zinc mined is a factor of 80,000 greater than indium and the US has significant volumes of zinc mined domestically, resulting in the ability for the US to be self-sufficient for this element that can be used in optoelectronic applications. The costs of elemental zinc is over 2 orders of magnitude less than indium, reflecting the relative abundance and availability of the elements. Arkema Inc. and an international primary glass manufacturing company, which is located in the United States, have developed doped zinc oxide technology for solar control windows. The genesis of this DOE SSL project was to determine if doped zinc oxide technology can be taken from the commodity based window market and translate the technology to OLED lighting. Thus, Arkema Inc. sought out experts, Philips Lighting, Pacific Northwest National Laboratories (PNNL) and National Renewable Research Laboratories (NREL), in OLED devices and brought them into the project. This project had a clear focus on economics and the work plan focused both on doped ZnO process and OLED device structure that would be consistent with the new TCO. The team successfully made 6 inch OLEDs with a serial construction. More process development is required to optimize commercial OLED structures. Feasibility was demonstrated on two different light extraction technologies: 1/4 lambda refractive index matching and high-low-high band pass filter. Process development was also completed on the key precursors for the TCO, which are ready for pilot-plant scale-up. Subsequently, Arkema has developed a cost of ownership model that is consistent with DOE SSL R&D Manufacturing targets as outlined in the DOE SSL R&D Manufacturing 2010 report. The overall outcome of this project was the demonstration that doped zinc oxide can be used for OLED devices without a drop-off in performance while gaining the economic and sustainable benefits of a more readily available TCO. The broad impact of this project, is the facilitation of OLED lighting market penetration into general illumination, resulting in significant energy savings, decreased greenhouse emissions, with no environmental impact issues such as mercury found in Fluorescent technology. The primary objective of this project was to develop a commercially viable process for 'Substrates' (Substrate/ undercoat/ TCO topcoat) to be used in production of OLED devices (lamps/luminaries/modules). This project focused on using Arkema's recently developed doped ZnO technology for the Fenestration industry and applying the technology to the OLED lighting industry. The secondary objective was the use of undercoat technology to improve light extraction from the OLED device. In optical fields and window applications, technology has been developed to mitigate reflection losses by selecting appropriate thicknesses and refractive indices of coatings applied either below or above the functional layer of interest. This technology has been proven and implemented in the fenestration industry for more than 15 years. Successful completion of

Martin Bluhm; James Coffey; Roman Korotkov; Craig Polsz; Alexandre Salemi; Robert Smith; Ryan Smith; Jeff Stricker; Chen Xu; Jasmine Shirazi; George Papakonstantopulous; Steve Carson; Claudia Goldman; Soren Hartmann; Frank Jessen; Bianca Krogmann; Christoph Rickers; Manfred Ruske; Holger Schwab; Dietrich Bertram

2011-01-02T23:59:59.000Z

49

Lighting Inventory Lighting Theatre and Drama  

E-Print Network [OSTI]

Lighting Inventory Lighting Theatre and Drama Description Totals R.Halls Wells- Metz Light ERS ETC SourceFour 25 25 50 degree ERS Strand Lighting 64 14 24 12 14 36 degree ERS ETC Source Four 15 15 36 degree ERS Strand Lighting 124 60 58 2 4 26 degree ERS ETC SourceFour 2 2 26 degree ERS Strand

Indiana University

50

Forest Landscape Description and  

E-Print Network [OSTI]

Forest Landscape Description and Inventories a basis for landplanning and design Pacific Southwest landscape description and inventories ­ a basis for land plan- ning and design. Berkeley, Calif., Pacific SW. Illustrates their application in two inventories made to aid managers and landscape architects in planning

Standiford, Richard B.

51

Application of Developed APCVD Transparent Conducting Oxides and Undercoat Technologies for Economical OLED Lighting  

SciTech Connect (OSTI)

Economics is a key factor for application of organic light emitting diodes (OLED) in general lighting relative to OLED flat panel displays that can handle high cost materials such as indium tin oxide (ITO) or Indium zinc oxide (IZO) as the transparent conducting oxide (TCO) on display glass. However, for OLED lighting to penetrate into general illumination, economics and sustainable materials are critical. The issues with ITO have been documented at the DOE SSL R&D and Manufacturing workshops for the last 5 years and the issue is being exaserbated by export controls from China (one of the major sources of elemental indium). Therefore, ITO is not sustainable because of the fluctuating costs and the United States (US) dependency on other nations such as China. Numerous alternatives to ITO/IZO are being evaluated such as Ag nanoparticles/nanowires, carbon nanotubes, graphene, and other metal oxides. Of these other metal oxides, doped zinc oxide has attracted a lot of attention over the last 10 years. The volume of zinc mined is a factor of 80,000 greater than indium and the US has significant volumes of zinc mined domestically, resulting in the ability for the US to be self-sufficient for this element that can be used in optoelectonic applications. The costs of elemental zinc is over 2 orders of magnitude less than indium, reflecting the relative abundance and availablility of the elements. Arkema Inc. and an international primary glass manufacturing company, which is located in the United States, have developed doped zinc oxide technology for solar control windows. The genesis of this DOE SSL project was to determine if doped zinc oxide technology can be taken from the commodity based window market and translate the technology to OLED lighting. Thus, Arkema Inc. sought out experts, Philips Lighting, Pacific Northwest National Laboratories (PNNL) and National Renewable Research Laboratories (NREL), in OLED devices and brought them into the project. This project had a clear focus on economics and the work plan focused both on doped ZnO process and OLED device structure that would be consistent with the new TCO. The team successfully made 6 inch OLEDs with a serial construction. More process development is required to optimize commercial OLED structures. Feasibility was demonstrated on two different light extraction technologies: 1/4 lambda refractive index matching and high-low-high band pass filter. Process development was also completed on the key precursors for the TCO, which are ready for pilot-plant scale-up. Subsequently, Arkema has developed a cost of ownership model that is consistent with DOE SSL R&D Manufacturing targets as outlined in the DOE SSL R&D Manufacturing 2010 report. The overall outcome of this project was the demonstration that doped zinc oxide can be used for OLED devices without a drop-off in performance while gaining the economic and sustainable benefits of a more readily available TCO. The broad impact of this project, is the facilitation of OLED lighting market penetration into general illumination, resulting in significant energy savings, decreased greenhouse emissions, with no environmental impact issues such as mercury found in Fluorescent technology.

Gary Silverman; Bluhm, Martin; Coffey, James; Korotkov, Roman; Polsz, Craig; Salemi, Alexandre; Smith, Robert; Smith, Ryan; Stricker, Jeff; Xu,Chen; Shirazi, Jasmine; Papakonstantopulous, George; Carson, Steve Philips Lighting GmbH Goldman, Claudia; Hartmann, Sören; Jessen, Frank; Krogmann, Bianca; Rickers, Christoph; Ruske, Manfred, Schwab, Holger; Bertram, Dietrich

2011-01-02T23:59:59.000Z

52

Assessing the Performance of 5mm White LED Light Sources for Developing-Country Applications  

E-Print Network [OSTI]

performance variations. Incandescent and fluorescent lightbetter than the common incandescent lamp. Off-grid lighting

Mills, Evan

2007-01-01T23:59:59.000Z

53

DESIGN & DEVELOPMENT OF E-TURBO FOR SUV AND LIGHT TRUCK APPLICATIONS  

SciTech Connect (OSTI)

The purpose of the project is to develop an electronically controlled, electrically assisted turbocharging system, e-Turbo, for application to SUV and light truck class of passenger vehicles. Earlier simulation work had shown the benefits of e-Turbo system on increasing low-end torque and improving fuel economy. This paper will present further data from the literature to show that advanced turbocharging can enable diesel engine downsizing of 10-30% with 6-17% improvement in fuel economy. This is in addition to the fuel economy benefit that a turbocharged diesel engine offers over conventional gasoline engines. E-Turbo is necessary to get acceptable driving characteristics with downsized diesel engines. As a first step towards the development of this technology for SUV/light truck sized diesel engines (4-6 litre displacement), design concepts and hardware were evaluated for a smaller engine (2 litre displacement). It was felt that design and developments issues could be minimized, the concept proven progressively on the bench, on a small engine and then applied to a large Vee engine (one on each bank). After successful demonstration of the concept, large turbomachinery could be designed and built specifically for larger SUV sized diesel engines. This paper presents the results of development of e-Turbo for a 2 litre diesel engine. A detailed comparison of several electric assist technologies including permanent magnet, six-phase induction and conventional induction motor/generator technology was done. A comparison of switched reluctance motor technology was also done although detailed design was not carried out.

Balis, C; Middlemass, C; Shahed, SM

2003-08-24T23:59:59.000Z

54

Evaluation of potential applications for templated arrays of heterostructural semiconductor nanowires as light emitting devices  

E-Print Network [OSTI]

While light emitting devices, such as laser diodes (LDs) and light emitting diodes (LEDs), were first introduced decades ago, they have been the subject of continuing research and improvements due to their relatively poor ...

Zou, Ting, M. Eng. Massachusetts Institute of Technology

2006-01-01T23:59:59.000Z

55

Life cycle assessment of off-grid lighting applications : kerosene vs. solar lanterns  

E-Print Network [OSTI]

Access to electricity in developing countries is minimal and if available, often unreliable. As a result, fuel-based kerosene lighting is the most common solution to lighting necessities. However, kerosene combustion affects ...

Dave, Shreya H

2008-01-01T23:59:59.000Z

56

On the Hamiltonian Description of Fluid Mechanics  

E-Print Network [OSTI]

We suggest the Hamiltonian approach for fluid mechanics based on the dynamics, formulated in terms of Lagrangian variables. The construction of the canonical variables of the fluid sheds a light of the origin of Clebsh variables, introduced in the previous century. The developed formalism permits to relate the circulation conservation (Tompson theorem) with the invariance of the theory with respect to special diffiomorphisms and establish also the new conservation laws. We discuss also the difference of the Eulerian and Lagrangian description, pointing out the incompleteness of the first. The constructed formalism is also applicable for ideal plasma. We conclude with several remarks on the quantization of the fluid.

I. Antoniou; G. P. Pronko

2002-03-14T23:59:59.000Z

57

Single White-Light-Emitting Nanostructures Based on Förster Resonance Energy Transfer: Development, Characterization and Applications.  

E-Print Network [OSTI]

??Electric energy use associated with lighting reaches up to 3400 Terawatts hours and constitutes approximately 20 % of the world total electricity output per year.… (more)

Chirmanov, Vadim

2015-01-01T23:59:59.000Z

58

Proposing Measures of Flicker in the Low Frequencies for Lighting Applications  

SciTech Connect (OSTI)

The IEEE Standards Working Group, IEEE P1789 'Recommending practices for modulating current in High Brightness LEDs for mitigating health risks to viewers' has been formed to advise the lighting industry, ANSI/NEMA, IEC, EnergyStar and other standards groups about the emerging concern of flicker in LED lighting. This paper intends to introduce new measures and definitions of lamp flicker in lighting. The discussion represents on-going work in IEEE P1789 that is vital to designing safe LED lamp drivers.

Lehman, Brad; Wilkins, Arnold; Berman, Sam; Poplawski, Michael E.; Miller, Naomi J.

2011-01-31T23:59:59.000Z

59

An Efficient LED System-in-Module for General Lighting Applications  

SciTech Connect (OSTI)

The objective of the project was to realize an LED-based lighting technology platform for general illumination, starting with LED chips, and integrating the necessary technologies to make compact, user-friendly, high-efficiency, energy-saving sources of controlled white (or variable-colored) light. The project is to build the system around the LEDs, and not to work on the LEDs themselves, in order that working products can be introduced soon after the LEDs reach suitable efficiency for mass-production of high-power light sources for general illumination. Because the light sources are intended for general illumination, color must be accurately maintained, requiring feedback control in the electronics. The project objective has been realized and screw base demonstrators, based on the technology developed in the project, have been built.

None

2008-09-14T23:59:59.000Z

60

AdS/QCD and Applications of Light-Front Holography  

SciTech Connect (OSTI)

Light-Front Holography leads to a rigorous connection between hadronic amplitudes in a higher dimensional anti-de Sitter (AdS) space and frame-independent light-front wavefunctions of hadrons in 3 + 1 physical space-time, thus providing a compelling physical interpretation of the AdS/CFT correspondence principle and AdS/QCD, a useful framework which describes the correspondence between theories in a modified AdS5 background and confining field theories in physical space-time. To a first semiclassical approximation, where quantum loops and quark masses are not included, this approach leads to a single-variable light-front Schroedinger equation which determines the eigenspectrum and the light-front wavefunctions of hadrons for general spin and orbital angular momentum. The coordinate z in AdS space is uniquely identified with a Lorentz-invariant coordinate {zeta} which measures the separation of the constituents within a hadron at equal light-front time. The internal structure of hadrons is explicitly introduced and the angular momentum of the constituents plays a key role. We give an overview of the light-front holographic approach to strongly coupled QCD. In particular, we study the photon-to-meson transition form factors (TFFs) F{sub M{gamma}}(Q{sup 2}) for {gamma}{gamma}* {yields} M using light-front holographic methods. The results for the TFFs for the {eta} and {eta}' mesons are also presented. Some novel features of QCD are discussed, including the consequences of confinement for quark and gluon condensates. A method for computing the hadronization of quark and gluon jets at the amplitude level is outlined.

Brodsky, Stanley J.; /SLAC /Southern Denmark U., CP3-Origins; Cao, Fu-Guang; /Massey U.; de Teramond, Guy F.; /Costa Rica U.

2012-02-16T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Light-induced polarization effects in atoms with partially resolved hyperfine structure and applications to absorption, fluorescence, and nonlinear magneto-optical rotation  

E-Print Network [OSTI]

Light-induced polarization effects in atoms with partially resolved hyperfine structure and applications to absorption, fluorescence, and nonlinear magneto-optical rotation M. Auzinsh* Department 9 November 2009 The creation and detection of atomic polarization is examined theoretically through

Auzinsh, Marcis

62

Application of a simple asynchronous mechanical light chopper to multielectron coincidence spectroscopy  

SciTech Connect (OSTI)

A simple asynchronous mechanical light chopper, based on modification of a turbo-molecular pump, has been developed to extend the interval between light pulses in single bunch operation at the Photon Factory storage ring. A pulse repetition rate of 80 kHz was achieved using a cylinder rotating at 48000 rpm, with 100 slits of 80 {mu}m width. This allows absolute timing of particles up to 12.48 {mu}s instead of the single-bunch period of 624 ns. We have applied the chopper together with a light pulse monitor to measure multielectron coincidence spectra using a magnetic bottle time-of-flight electron spectrometer. With such a system, the electron energies are determined without any ambiguity, the folding of coincidence spectra disappears and the effect of false coincidences is drastically reduced.

Ito, Kenji; Suzuki, Isao H. [Photon Factory, IMSS, KEK, Oho 1-1, Tsukuba, Ibaraki 305-0801 (Japan); Penent, Francis; Lablanquie, Pascal [Universite Pierre et Marie Curie (UPMC), 11 rue Pierre et Marie Curie, 75231 Paris Cedex 05 (France); CNRS, LCPMR (UMR 7614), 11 rue Pierre et Marie Curie, 75231 Paris Cedex 05 (France); Hikosaka, Yasumasa; Shigemasa, Eiji [UVSOR Facility, Institute for Molecular Science, Okazaki 444-8585 (Japan); Eland, John H. D. [PTCL, Oxford University, South Parks Road, Oxford OX1 3QZ (United Kingdom)

2009-12-15T23:59:59.000Z

63

Applications of the Generalized DDA Formalism and the Nature of Polarized Light in Deep Oceans  

E-Print Network [OSTI]

is applied to confi rmation of irregular invisibility cloaks made from metamaterials. In the second part, radiative transfer in a coupled atmosphere-ocean system is solved to study the asymptotic nature of the polarized light in deep oceans. The rate at which...

You, Yu

2010-01-16T23:59:59.000Z

64

Investigation of a moly-oxide electrodeless discharge for lighting applications  

SciTech Connect (OSTI)

Due to the hazardous material designation of spent fluorescent bulbs on board naval vessels, the Naval Research Laboratory has been investigating alternative lighting concepts which are free of mercury. The ideal goal is an efficient, large volume source, which provides white light directly without the use of a phosphor coating. Experiments with a {mu}wave plasma reactor normally used to diamond growth at {approximately}40 Torr revealed that a combination of O{sub 2}, N{sub 2}, and a heated molybdenum puck led to intense plasma emission in the visible domain. As the reactor was not designed for lighting studies, the authors have been investigating the process in glass tubes with a re-entry geometry and RF driven coils. Results will be presented on the initial discovery, the role of moly-oxide in surface evaporation, and the favorable emission spectrum of atomic molybdenum for visible light. Initial studies of the RF system, including coil design, measured electron density, B-dot measurements, E-to-H transitions, and spectroscopic analysis of various compositions will also be discussed. Finally, the essential problem of a recycling process for the moly emitters from the glass walls back to the moderate pressure plasma using chlorine will be addressed.

Giuliani, J.L.; Meger, R.A.; Pechacek, R.E.; Hinshelwood, D.D.; Shamamian, V.; Butler, J.E.

1999-07-01T23:59:59.000Z

65

Detroit Diesel Engine Technology for Light Duty Truck Applications - DELTA Engine Update  

SciTech Connect (OSTI)

The early generation of the DELTA engine has been thoroughly tested and characterized in the virtual lab, during engine dynamometer testing, and on light duty trucks for personal transportation. This paper provides an up-to-date account of program findings. Further, the next generation engine design and future program plans will be briefly presented.

Freese, Charlie

2000-08-20T23:59:59.000Z

66

Arnold Schwarzenegger LIGHTING RESEARCH PROGRAM  

E-Print Network [OSTI]

Project Summaries ELEMENT 2: ADVANCE LIGHTING TECHNOLOGIES PROJECT 2.1 LIGHT EMITTING DIODE (LED light emitting diodes (LED) technology for general lighting applications by developing a task lamp

67

Methods for preparation of nanocrystalline rare earth phosphates for lighting applications  

SciTech Connect (OSTI)

Disclosed here are methods for the preparation of optionally activated nanocrystalline rare earth phosphates. The optionally activated nanocrystalline rare earth phosphates may be used as one or more of quantum-splitting phosphor, visible-light emitting phosphor, vacuum-UV absorbing phosphor, and UV-emitting phosphor. Also disclosed herein are discharge lamps comprising the optionally activated nanocrystalline rare earth phosphates provided by these methods.

Comanzo, Holly Ann; Manoharan, Mohan; Martins Loureiro, Sergio Paulo; Setlur, Anant Achyut; Srivastava, Alok Mani

2013-04-16T23:59:59.000Z

68

Thermophysical properties of saturated light and heavy water for advanced neutron source applications  

SciTech Connect (OSTI)

The Advanced Neutron Source is an experimental facility being developed by Oak Ridge National Laboratory. As a new nuclear fission research reactor of unprecedented flux, the Advanced Neutron Source Reactor will provide the most intense steady-state beams of neutrons in the world. The high heat fluxes generated in the reactor [303 MW(t) with an average power density of 4.5 MW/L] will be accommodated by a flow of heavy water through the core at high velocities. In support of this experimental and analytical effort, a reliable, highly accurate, and uniform source of thermodynamic and transport property correlations for saturated light and heavy water were developed. In order to attain high accuracy in the correlations, the range of these correlations was limited to the proposed Advanced Neutron Source Reactor's nominal operating conditions. The temperature and corresponding saturation pressure ranges used for light water were 20--300[degrees]C and 0.0025--8.5 MPa, respectively, while those for heavy water were 50--250[degrees]C and 0.012--3.9 MPa. Deviations between the correlation predictions and data from the various sources did not exceed 1.0%. Light water vapor density was the only exception, with an error of 1.76%. The physical property package consists of analytical correlations, SAS codes, and FORTRAN subroutines incorporating these correlations, as well as an interactive, easy-to-use program entitled QuikProp.

Crabtree, A.; Siman-Tov, M.

1993-05-01T23:59:59.000Z

69

Thermophysical properties of saturated light and heavy water for Advanced Neutron Source applications  

SciTech Connect (OSTI)

The Advanced Neutron Source is an experimental facility being developed by Oak Ridge National Laboratory. As a new nuclear fission research reactor of unprecedented flux, the Advanced Neutron Source Reactor will provide the most intense steady-state beams of neutrons in the world. The high heat fluxes generated in the reactor [303 MW(t) with an average power density of 4.5 MW/L] will be accommodated by a flow of heavy water through the core at high velocities. In support of this experimental and analytical effort, a reliable, highly accurate, and uniform source of thermodynamic and transport property correlations for saturated light and heavy water were developed. In order to attain high accuracy in the correlations, the range of these correlations was limited to the proposed Advanced Neutron Source Reactor`s nominal operating conditions. The temperature and corresponding saturation pressure ranges used for light water were 20--300{degrees}C and 0.0025--8.5 MPa, respectively, while those for heavy water were 50--250{degrees}C and 0.012--3.9 MPa. Deviations between the correlation predictions and data from the various sources did not exceed 1.0%. Light water vapor density was the only exception, with an error of 1.76%. The physical property package consists of analytical correlations, SAS codes, and FORTRAN subroutines incorporating these correlations, as well as an interactive, easy-to-use program entitled QuikProp.

Crabtree, A.; Siman-Tov, M.

1993-05-01T23:59:59.000Z

70

Phase-sensitive light : coherence theory and applications to optical imaging  

E-Print Network [OSTI]

Spontaneous parametric downconversion (SPDC) can produce pairs of entangled photons, i.e., a stream of biphotons. SPDC has been utilized in a number of optical imaging applications, such as optical coherence tomography, ...

Erkmen, Baris Ibrahim, 1980-

2008-01-01T23:59:59.000Z

71

DELTA-DIESEL ENGINE LIGHT TRUCK APPLICATION Contract DE-FC05-97OR22606 Final Report  

SciTech Connect (OSTI)

DELTA Diesel Engine Light Truck Application End of Contract Report DE-FC05-97-OR22606 EXECUTIVE SUMMARY This report is the final technical report of the Diesel Engine Light Truck Application (DELTA) program under contract DE-FC05-97-OR22606. During the course of this contract, Detroit Diesel Corporation analyzed, designed, tooled, developed and applied the ''Proof of Concept'' (Generation 0) 4.0L V-6 DELTA engine and designed the successor ''Production Technology Demonstration'' (Generation 1) 4.0L V-6 DELTA engine. The objectives of DELTA Program contract DE-FC05-97-OR22606 were to: Demonstrate production-viable diesel engine technologies, specifically intended for the North American LDT and SUV markets; Demonstrate emissions compliance with significant fuel economy advantages. With a clean sheet design, DDC produced the DELTA engine concept promising the following attributes: 30-50% improved fuel economy; Low cost; Good durability and reliability; Acceptable noise, vibration and harshness (NVH); State-of-the-art features; Even firing, 4 valves per cylinder; High pressure common rail fuel system; Electronically controlled; Turbocharged, intercooled, cooled EGR; Extremely low emissions via CLEAN Combustion{copyright} technology. To demonstrate the engine technology in the SUV market, DDC repowered a 1999 Dodge Durango with the DELTA Generation 0 engine. Fuel economy improvements were approximately 50% better than the gasoline engine replaced in the vehicle.

Hakim, Nabil Balnaves, Mike

2003-05-27T23:59:59.000Z

72

Hydrogen/Natural Gas Blends for Heavy and Light-Duty Applications  

E-Print Network [OSTI]

exhaust emissions that can be achieved relative to both diesel and natural gas alternatives. The design $ For applications that now use diesel engines $ Develop engine configurations that can replace existing diesel that minimizes the surface to volume ratio. However, care must be taken to avoid engine knock. This can require

73

Lighting Options for Homes.  

SciTech Connect (OSTI)

This report covers many aspects of various lighting options for homes. Types of light sources described include natural light, artificial light, incandescent lamps, fluorescent lamps, and high intensity discharge lamps. A light source selection guide gives the physical characteristics of these, design considerations, and common applications. Color, strategies for efficient lighting, and types of lighting are discussed. There is one section giving tips for various situations in specific rooms. Rooms and types of fixtures are shown on a matrix with watts saved by using the recommended type lighting for that room and room location. A major emphasis of this report is saving energy by utilizing the most suitable, recommended lighting option. (BN)

Baker, W.S.

1991-04-01T23:59:59.000Z

74

Vibrational spectra of light and heavy water with application to neutron cross section calculations  

SciTech Connect (OSTI)

The design of nuclear reactors and neutron moderators require a good representation of the interaction of low energy (E < 1 eV) neutrons with hydrogen and deuterium containing materials. These models are based on the dynamics of the material, represented by its vibrational spectrum. In this paper, we show calculations of the frequency spectrum for light and heavy water at room temperature using two flexible point charge potentials: SPC-MPG and TIP4P/2005f. The results are compared with experimental measurements, with emphasis on inelastic neutron scattering data. Finally, the resulting spectra are applied to calculation of neutron scattering cross sections for these materials, which were found to be a significant improvement over library data.

Damian, J. I. Marquez; Granada, J. R. [Neutron Physics Department and Instituto Balseiro, Centro Atomico Bariloche, CNEA (Argentina); Malaspina, D. C. [Department of Biomedical Engineering and Chemistry of Life Processes Institute, Northwestern University, 2145 Sheridan Road, Evanston, Illinois 60208 (United States)

2013-07-14T23:59:59.000Z

75

Application of canonical Hamiltonian formulation to nonlinear light-envelope propagations  

E-Print Network [OSTI]

The canonical equations of Hamilton of the first-order differential system is introduced and applied to the nonlinear light-envelope propagations. The approximate analytical soliton solutions of the nonlocal nonlinear Schr\\"{o}dinger equation (NNLSE) are obtained. The stability of solitons is analysed analytically in the simple way as well. For the system modeled by the NNLSE, the Hamiltonian can be expressed as the sum of the generalized kinetic energy and the generalized potential. The extreme points of the generalized potential correspond to the solitons of the NNLSE. Solitons are stable when the generalized potential has the minimum, and unstable otherwise. In addition, the rigorous proof of the equivalency between the NNLSE and the Euler-Lagrange equation is given on the premise of the response function with even symmetry.

Liang, Guo; Li, Yingbin; Ren, Zhanmei

2015-01-01T23:59:59.000Z

76

On description of quantum plasma  

E-Print Network [OSTI]

A plasma becomes quantum when the quantum nature of its particles significantly affects its macroscopic properties. To answer the question of when the collective quantum plasma effects are important, a proper description of such effects is necessary. We consider here the most common methods of description of quantum plasma, along with the related assumptions and applicability limits. In particular, we analyze in detail the hydrodynamic description of quantum plasma, as well as discuss some kinetic features of analytic properties of linear dielectric response function in quantum plasma. We point out the most important, in our view, fundamental problems occurring already in the linear approximation and requiring further investigation. (submitted to Physics-Uspekhi)

S. V. Vladimirov; Yu. O. Tyshetskiy

2011-01-21T23:59:59.000Z

77

Experimental investigation of silicon photomultipliers as compact light readout systems for gamma-ray spectroscopy applications in fusion plasmas  

SciTech Connect (OSTI)

A matrix of Silicon Photo Multipliers has been developed for light readout from a large area 1 in. × 1 in. LaBr{sub 3} crystal. The system has been characterized in the laboratory and its performance compared to that of a conventional photo multiplier tube. A pulse duration of 100 ns was achieved, which opens up to spectroscopy applications at high counting rates. The energy resolution measured using radioactive sources extrapolates to 3%–4% in the energy range E{sub ?} = 3–5 MeV, enabling gamma-ray spectroscopy measurements at good energy resolution. The results reported here are of relevance in view of the development of compact gamma-ray detectors with spectroscopy capabilities, such as an enhanced gamma-ray camera for high power fusion plasmas, where the use of photomultiplier is impeded by space limitation and sensitivity to magnetic fields.

Nocente, M., E-mail: massimo.nocente@mib.infn.it; Gorini, G. [Dipartimento di Fisica “G. Occhialini,” Università degli Studi di Milano-Bicocca, Milano (Italy); Istituto di Fisica del Plasma “P. Caldirola,” EURATOM-ENEA-CNR Association, Milano (Italy); Fazzi, A.; Lorenzoli, M.; Pirovano, C. [Dipartimento di Energia, CeSNEF, Politecnico di Milano, Milano (Italy); Istituto Nazionale di Fisica Nucleare, Sezione di Milano, Milano (Italy); Tardocchi, M. [Istituto di Fisica del Plasma “P. Caldirola,” EURATOM-ENEA-CNR Association, Milano (Italy); Cazzaniga, C.; Rebai, M. [Dipartimento di Fisica “G. Occhialini,” Università degli Studi di Milano-Bicocca, Milano (Italy); Uboldi, C.; Varoli, V. [Dipartimento di Energia, CeSNEF, Politecnico di Milano, Milano (Italy)

2014-11-15T23:59:59.000Z

78

Application Checklist Item Description Date  

E-Print Network [OSTI]

enrolled courses. Resume Please contact the Career Center for resume support. http://career.berkeley.edu/Tools/Resume

Militzer, Burkhard

79

A High Resolution, Light-Weight, Synthetic Aperture Radar for UAV Application  

SciTech Connect (OSTI)

(U) Sandia National Laboratories in collaboration with General Atomics (GA) has designed and built a high resolution, light-weight, Ku-band Synthetic Aperture Radar (SAR) known as "Lynx". Although Lynx can be operated on a wide variety of manned and unmanned platforms, its design is optimized for use on medium altitude Unmanned Aerial Vehicles (UAVS). In particular, it can be operated on the Predator, I-GNAT, and Prowler II platforms manufactured by GA. (U) The radar production weight is less than 120 lb and operates within a 3 GHz band from 15.2 GHz to 18.2 GHz with a peak output power of 320 W. Operating range is resolution and mode dependent but can exceed 45 km in adverse weather (4 mm/hr rain). Lynx has operator selectable resolution and is capable of 0.1 m resolution in spotlight mode and 0.3 m resolution in stripmap mode, over substantial depression angles (5 to 60 deg) and squint angles (broadside ±45 deg). Real-time Motion Compensation is implemented to allow high-quality image formation even during vehicle turns and other maneuvers.

Doerry, A.W.; Hensley, W.H.; Stence, J.; Tsunoda, S.I. Pace, F.; Walker, B,C.; Woodring, M.

1999-05-27T23:59:59.000Z

80

Far UV excitation of hydrogen and light emission; applications in astrophysics  

E-Print Network [OSTI]

Assuming a spherical symmetry, the extreme UV emitted by a very hot source ionizes low pressure molecular hydrogen making a transparent bubble of H II (Protons and electrons). For an increase of radius, intensity of extreme UV and temperature decrease, so that the plasma contains more and more atoms. A spherical shell, mainly of neutral atoms (H I) appears. If this shell is optically thick at Lyman frequencies of H I, it is superradiant and a competition of modes selects modes tangent to a sphere for which many atoms are excited. Thus, a shell of plasma emits, into a given direction, tangential rays showing a ring in which selected modes are brighter. While at Lyman frequencies, absorption of rays emitted by the source excites the atoms able to amplify the superradiance, a more powerful amplification of superradiance results from an induced scattering of the radial beams, which extends to feet of lines and progressively to the whole spectrum. Thermodynamics says that the brightness of radial and tangential beams tends to be equal; if the solid angle of observation is much larger for the ring than for the source, almost the whole light emitted by the source is transferred to the rings, and the source becomes invisible. Paradoxically, a glow due to incoherent scattering and impurities around the source remains visible. As the scattering decreases with the decrease of the radial intensity, the brightness of the ring decreases with radius. These characteristics are found in supernova remnant 1987A.

Jacques Moret-Bailly

2007-07-20T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Fundamental Studies and Development of III-N Visible LEDs for High-Power Solid-State Lighting Applications  

SciTech Connect (OSTI)

The goal of this program is to understand in a fundamental way the impact of strain, defects, polarization, and Stokes loss in relation to unique device structures upon the internal quantum efficiency (IQE) and efficiency droop (ED) of III-nitride (III-N) light-emitting diodes (LEDs) and to employ this understanding in the design and growth of high-efficiency LEDs capable of highly-reliable, high-current, high-power operation. This knowledge will be the basis for our advanced device epitaxial designs that lead to improved device performance. The primary approach we will employ is to exploit new scientific and engineering knowledge generated through the application of a set of unique advanced growth and characterization tools to develop new concepts in strain-, polarization-, and carrier dynamics-engineered and low-defect materials and device designs having reduced dislocations and improved carrier collection followed by efficient photon generation. We studied the effects of crystalline defect, polarizations, hole transport, electron-spillover, electron blocking layer, underlying layer below the multiplequantum- well active region, and developed high-efficiency and efficiency-droop-mitigated blue LEDs with a new LED epitaxial structures. We believe new LEDs developed in this program will make a breakthrough in the development of high-efficiency high-power visible III-N LEDs from violet to green spectral region.

Dupuis, Russell

2012-02-29T23:59:59.000Z

82

STEP Intern Job Description  

Broader source: Energy.gov [DOE]

STEP Intern Job Description, from the Tool Kit Framework: Small Town University Energy Program (STEP).

83

AWong Scholarship Description and Application_v2[2].docx 6/16/14 Anthony Wong Scholarship for Research in Sustainable Design  

E-Print Network [OSTI]

for Research in Sustainable Design Description The Department of Architecture gratefully acknowledges the gift from Anthony Wong (`76) to support student travel to present cutting-edge research in sustainable and is committed to personally presenting the work at the conference; b. demonstrate the topic in sustainable

84

Posters | Posters --721 Exploring lighting cultures  

E-Print Network [OSTI]

Posters | Posters -- 721 Exploring lighting cultures Beyond light and emotions Vincent LAGANIER 1 , Jasmine van der POL 2 1. Lighting Applications Services (LiAS), Philips Lighting, France vincent.laganier@philips.com 2

Boyer, Edmond

85

CHP R&D Project Descriptions  

Broader source: Energy.gov [DOE]

The CHP R&D project portfolio includes advanced reciprocating engine systems (ARES), packaged CHP systems, high-value applications, fuel-flexible CHP, and demonstrations of these technologies. Project fact sheets and short project descriptions are provided below:

86

Project Manager, TBD Job Description Questionnaire (JDQ)  

E-Print Network [OSTI]

Project Manager, TBD Job Description Questionnaire (JDQ) Professional Staff Instructions What with a disability in regard to job application procedures, the hiring or discharge of employees, employee Below to Certify Approval or Disapproval: Approval Disapproval ( ) ( ) TBD, Project Manager

Barrash, Warren

87

Project Description: page 1 Project Description  

E-Print Network [OSTI]

Project Description: page 1 Project Description I. Introduction: Josephson junction networks Over the past 25 years, superconducting Josephson junctions have gradually become one of the major topics standards. Our research uses Josephson junctions as model systems for problems in nonlinear and neural

Segall, Ken

88

Student Groups Student Group Description Short Description  

E-Print Network [OSTI]

Student Groups Student Group Description Short Description AHR Scholar-Architecture Scholar ART Honors - Architecture Honors H04 Honors - Allied Medical Prof Honors H05 Honors - Arts & Sciences Honors H14 Honors - Envir&Natural Resources Honors H15 Honors - Food, Agr, & Envir Sci Honors H16 Honors

89

CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.

J.F. Beesley

2005-04-21T23:59:59.000Z

90

Light-Front Holography and Gauge/Gravity Duality: The Light Meson and Baryon Spectra  

SciTech Connect (OSTI)

Starting from the bound state Hamiltonian equation of motion in QCD, we derive relativistic light-front wave equations in terms of an invariant impact variable {zeta} which measures the separation of the quark and gluonic constituents within the hadron at equal light-front time. These equations of motion in physical space-time are equivalent to the equations of motion which describe the propagation of spin-J modes in anti-de Sitter (AdS) space. Its eigenvalues give the hadronic spectrum, and its eigenmodes represent the probability amplitudes of the hadronic constituents at a given scale. An effective classical gravity description in a positive-sign dilaton background exp(+{kappa}{sup 2}z{sup 2}) is given for the phenomenologically successful soft-wall model which naturally encodes the internal structure of hadrons and their orbital angular momentum. Applications to the light meson and baryon spectrum are presented.

de Teramond, Guy F.; /Costa Rica U.; Brodsky, Stanley J.; /SLAC

2009-12-09T23:59:59.000Z

91

Investigating potential efficiency improvement for light-duty transportation applications through simulation of an organic Rankine cycle for waste-heat recovery  

SciTech Connect (OSTI)

Modern diesel engines used in light-duty transportation applications have peak brake thermal efficiencies in the range of 40-42% for high-load operation with substantially lower efficiencies at realistic road-load conditions. Thermodynamic energy and exergy analysis reveals that the largest losses from these engines are due to heat loss and combustion irreversibility. Substantial improvement in overall engine efficiency requires reducing or recovering these losses. Unfortunately, much of the heat transfer either occurs at relatively low temperatures resulting in large entropy generation (such as in the air-charge cooler), is transferred to low-exergy flow streams (such as the oil and engine coolant), or is radiated or convected directly to the environment. While there are significant opportunities for recovery from the exhaust and EGR cooler for heavy-duty applications, the potential benefits of such a strategy for light-duty applications are unknown due to transient operation, low-load operation at typical driving conditions, and the added mass of the system. We have developed an organic Rankine cycle model using GT-Suite to investigate the potential for efficiency improvement through waste-heat recovery from the exhaust and EGR cooler of a light-duty diesel engine. Results from steady-state and drive-cycle simulations are presented, and we discuss strategies to address operational difficulties associated with transient drive cycles and competition between waste-heat recovery systems, turbochargers, aftertreatment devices, and other systems for the limited thermal resources.

Edwards, Kevin Dean [ORNL; Wagner, Robert M [ORNL

2010-01-01T23:59:59.000Z

92

Mechanical Engineer Company Description  

E-Print Network [OSTI]

Mechanical Engineer Company Description Control Solutions Inc. is a small, dynamic, and rapidly. Position Description The Mechanical Engineer is responsible for all aspects associated with the mechanical enclosures, brackets, cabling assemblies among others. Systems include mechanisms, sensors, hydraulics, among

Kostic, Milivoje M.

93

Space, light, and time : prospective analysis of Circadian illumination for health-based daylighting with applications to healthcare architecture  

E-Print Network [OSTI]

Light in architecture can be studied for its objective or perceptual effects. This thesis describes an objective link between human health and architectural design. Specifically, the link between daylight and human circadian ...

Pechacek, Christopher S. (Christopher Scott)

2008-01-01T23:59:59.000Z

94

Phase-space representation of digital holographic and light field imaging with application to two-phase flows  

E-Print Network [OSTI]

In this thesis, two computational imaging techniques used for underwater research, in particular, two-phase flows measurements, are presented. The techniques under study, digital holographic imaging and light field imaging, ...

Tian, Lei, Ph. D. Massachusetts Institute of Technology

2010-01-01T23:59:59.000Z

95

Technology data characterizing lighting in commercial buildings: Application to end-use forecasting with commend 4.0  

SciTech Connect (OSTI)

End-use forecasting models typically utilize technology tradeoff curves to represent technology options available to consumers. A tradeoff curve, in general terms, is a functional form which relates efficiency to capital cost. Each end-use is modeled by a single tradeoff curve. This type of representation is satisfactory in the analysis of many policy options. On the other hand, for policies addressing individual technology options or groups of technology options, because individual technology options are accessible to the analyst, representation in such reduced form is not satisfactory. To address this and other analysis needs, the Electric Power Research Institute (EPRI) has enhanced its Commercial End-Use Planning System (COMMEND) to allow modeling of specific lighting and space conditioning (HVAC) technology options. This report characterizes the present commercial floorstock in terms of lighting technologies and develops cost-efficiency data for these lighting technologies. This report also characterizes the interactions between the lighting and space conditioning end uses in commercial buildings in the US In general, lighting energy reductions increase the heating and decrease the cooling requirements. The net change in a building`s energy requirements, however, depends on the building characteristics, operating conditions, and the climate. Lighting/HVAC interactions data were generated through computer simulations using the DOE-2 building energy analysis program.

Sezgen, A.O.; Huang, Y.J.; Atkinson, B.A.; Eto, J.H.; Koomey, J.G.

1994-05-01T23:59:59.000Z

96

Book review Light Scattering Reviews 4: Single Light Scattering and  

E-Print Network [OSTI]

-monograph on the use of space-time Green functions in the description of the diffusive radiation transport in active equation of the radiative transfer theory in the classical style of the ``Soviet'' school of radiativeBook review Light Scattering Reviews 4: Single Light Scattering and Radiative Transfer, A

97

Photonic crystal light source  

DOE Patents [OSTI]

A light source is provided by a photonic crystal having an enhanced photonic density-of-states over a band of frequencies and wherein at least one of the dielectric materials of the photonic crystal has a complex dielectric constant, thereby producing enhanced light emission at the band of frequencies when the photonic crystal is heated. The dielectric material can be a metal, such as tungsten. The spectral properties of the light source can be easily tuned by modification of the photonic crystal structure and materials. The photonic crystal light source can be heated electrically or other heating means. The light source can further include additional photonic crystals that exhibit enhanced light emission at a different band of frequencies to provide for color mixing. The photonic crystal light source may have applications in optical telecommunications, information displays, energy conversion, sensors, and other optical applications.

Fleming, James G. (Albuquerque, NM); Lin, Shawn-Yu (Albuquerque, NM); Bur, James A. (Corrales, NM)

2004-07-27T23:59:59.000Z

98

Green route synthesis of high quality CdSe quantum dots for applications in light emitting devices  

SciTech Connect (OSTI)

Investigation was made on light emitting diodes fabricated using CdSe quantum dots. CdSe quantum dots were synthesized chemically using olive oil as the capping agent, instead of toxic phosphine. Room temperature photoluminescence investigation showed sharp 1st excitonic emission peak at 568 nm. Bi-layer organic/inorganic (P3HT/CdSe) hybrid light emitting devices were fabricated by solution process. The electroluminescence study showed low turn on voltage ({approx}2.2 V) .The EL peak intensity was found to increase by increasing the operating current. - Graphical abstract: Light emitting diode was fabricated using CdSe quantum dots using olive oil as the capping agent, instead of toxic phosphine. Bi-layer organic/inorganic (P3HT/CdSe) hybrid light emitting device shows strong electroluminescence in the range 630-661 nm. Highlights: Black-Right-Pointing-Pointer CdSe Quantum dots were synthesized using olive oil as the capping agent. Black-Right-Pointing-Pointer Light emitting device was fabricated using CdSe QDs/P3HT polymer heterojunction. Black-Right-Pointing-Pointer The I-V characteristics study showed low turn on voltage at {approx}2.2 V. Black-Right-Pointing-Pointer The EL peak intensity increases with increasing the operating current.

Bera, Susnata, E-mail: susnata.bera@gmail.com [Department of Physics and Meteorology, Indian Institute of Technology Kharagpur, Kharagpur 721302 (India); Singh, Shashi B. [Department of Physics and Meteorology, Indian Institute of Technology Kharagpur, Kharagpur 721302 (India); Ray, S.K., E-mail: physkr@phy.iitkgp.ernet.in [Department of Physics and Meteorology, Indian Institute of Technology Kharagpur, Kharagpur 721302 (India)

2012-05-15T23:59:59.000Z

99

Technology Development for Light Duty High Efficient Diesel Engines...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Light Duty High Efficient Diesel Engines Technology Development for Light Duty High Efficient Diesel Engines Improve the efficiency of diesel engines for light duty applications...

100

DESCRIPTION OF ACTIVITIES AND SELECTED RESULTS FOR THE U.S. DEPARTMENT OF ENERGY S CLEAN ENERGY APPLICATION CENTERS: FISCAL YEAR 2010  

SciTech Connect (OSTI)

The U.S. Department of Energy (DOE) sponsors a set of Clean Energy Application Centers that promote the development and deployment of clean energy technologies. There are eight regional centers that provide assistance for specific areas of the country plus a separate center operated by the International District Energy Association that provides technical assistance on district energy issues and applications to the regional centers. The original focus of the centers was on combined heat and power (CHP) alone but, beginning in fiscal year 2010, their scope expanded to include district energy systems and waste heat recovery. At that time, the official name of the centers changed from CHP Regional Application Centers (RACs) to Clean Energy Application Centers, and their number was expanded to include the previously-mentioned center focusing on district energy. Oak Ridge National Laboratory (ORNL) has performed two previous studies of RAC activities. The first one examined what the RACs had done each year from the initiation of the program through fiscal year (FY) 2008 and the second one examined RAC activities for the 2009 fiscal year. The most recent study, described in this report, examines what was accomplished in fiscal year 2010, the first year since the RACs expanded their focus and changed their name to Clean Energy Application Centers.

Schweitzer, Martin [ORNL

2011-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Thermoelectric HVAC and Thermal Comfort Enablers for Light-Duty...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Thermoelectric HVAC and Thermal Comfort Enablers for Light-Duty Vehicle Applications Thermoelectric HVAC and Thermal Comfort Enablers for Light-Duty Vehicle Applications 2012 DOE...

102

DOE Publishes GATEWAY Report on Pedestrian Friendly Outdoor Lighting...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

criteria might be, how they differ from street and area lighting applications, and how solid-state lighting can be better applied in pedestrian applications. Every outdoor...

103

Waste Description Type of Project Pounds Reduced, Reused,  

E-Print Network [OSTI]

Accelerator =1; National Synchrotron Light Source=1; Basic Energy Sciences=1) each handle 66 lbs. of hazardousWaste Description Type of Project Pounds Reduced, Reused, Recycled or Conserved in 2009 Waste Type Description Details * Alkaline batteries Recycling 200 Industrial waste $10 $0 $10 Two hundred pounds

104

Review article FUSSIM2: brief description of the simulation model  

E-Print Network [OSTI]

Review article FUSSIM2: brief description of the simulation model and application to fertigation zone, which may be harmful to crop development. A two-dimensional simulation model for the above-dimensional simulation model Résumé ­ FUSSIM2 : brève description du modèle de simulation et application aux scenari de

Paris-Sud XI, Université de

105

Efficient Light Sources Today  

E-Print Network [OSTI]

This paper reviews new lamp and lighting technology in terms of application and economic impact. Included are the latest advances in High Intensity Discharge systems, energy saving fluorescent lamps and ballasts, and the new state of the art high...

Hart, A. L.

1982-01-01T23:59:59.000Z

106

NASA Academy Program Descriptions  

E-Print Network [OSTI]

NASA Academy Program Descriptions October 2010 #12;NASA Academy Program Descriptions 2011 October 11, 2010 1/5 NASA Academy at ARC, GRC, GSFC, and MSFC Websites: Ames: http://academy.arc.nasa.gov Glenn: http://academy.grc.nasa.gov Goddard: http://academy.gsfc.nasa.gov Marshall: http://academy

Wang, Z. Jane

107

STATISTICAL DESCRIPTION OF THE  

E-Print Network [OSTI]

STATISTICAL DESCRIPTION OF THE CHIRIKOV-TAYLOR MODEL IN THE PRESENCE OF NOISE A. B. RECHESTER that the presence of noise makes the statistical description of this system unique. Theform of the diffusion, and statistical averaging, performed ana- lytically with thepath-integral method, are the same. Some

Karney, Charles

108

Energy Savings Estimates of Light Emitting Diodes in Niche Lighting...  

Office of Environmental Management (EM)

in Niche Lighting Applications Prepared for: Building Technologies Program Office of Energy Efficiency and Renewable Energy U.S. Department of Energy Prepared by: Navigant...

109

Commercial Lighting  

Broader source: Energy.gov [DOE]

Commercial lighting accounts for more than 20 percent of total commercial building energy use. The Energy Department works to reduce lighting energy use through research and deployment.

110

Dynamically coupling the non-linear Stokes equations with the Shallow Ice Approximation in glaciology: Description and first applications of the ISCAL method  

E-Print Network [OSTI]

We propose and implement a new method, called the Ice Sheet Coupled Approximation Levels (ISCAL) method, for simulation of ice sheet flow in large domains under long time-intervals. The method couples the exact, full Stokes (FS) equations with the Shallow Ice Approximation (SIA). The part of the domain where SIA is applied is determined automatically and dynamically based on estimates of the modeling error. For a three dimensional model problem where the number of degrees of freedom is comparable to a real world application, ISCAL performs almost an order of magnitude faster with a low reduction in accuracy compared to a monolithic FS. Furthermore, ISCAL is shown to be able to detect rapid dynamic changes in the flow. Three different error estimations are applied and compared. Finally, ISCAL is applied to the Greenland Ice Sheet, proving ISCAL to be a potential valuable tool for the ice sheet modeling community.

Ahlkrona, Josefin; Kirchner, Nina; Zwinger, Thomas

2015-01-01T23:59:59.000Z

111

Journey to Leadership Certificate Program Application  

Broader source: Energy.gov [DOE]

Application packet for Journey to Leadership Certificate Program Pilot course, includes description.

112

Description urse deals w  

E-Print Network [OSTI]

H Place: O Meeting Tentativ W L o L W L M L Description urse deals w g offshore r seamounts, animal ecology. Plant-animal interactions in the shallow subtidal zone. Lab & Field Work: Community analysis

113

B Plant facility description  

SciTech Connect (OSTI)

Buildings 225B, 272B, 282B, 282BA, and 294B were removed from the B Plant facility description. Minor corrections were made for tank sizes and hazardous and toxic inventories.

Chalk, S.E.

1996-10-04T23:59:59.000Z

114

The Application of Structural Materials Data From the BN-350 Fast Reactor to Life Extension of Light Water Reactors  

SciTech Connect (OSTI)

This paper describes the results of investigations of 08Cr16Ni11Mo3 (AISI 316 steel analogue) austenitic stainless steel irradiated in BN-350 breeder reactor at irradiation conditions close to that for Light Water Reactor (LWR) Internals. The pores were found in 08Cr16Ni11Mo3 steel irradiated at temperature 280 deg. C up to rather low damage 1.3 dpa and with dose rate 3.9 x 10{sup -9} dpa/s. There were obtained dose rate dependencies of yield strength, ultimate strength and ductility for 08Cr16Ni11Mo3 steel irradiated up to 7-13 dpa at 302-311 deg. C. These dependencies show a decrease in both yield strength and ultimate strength when dose rate decreases. There was observed an apparent decrease in total elongation when dose rate decreases, which was presumably connected with the pores formation in the steel at low dose rates. (authors)

Romanenko, O.G. [Nuclear Technology Safety Center, Liza Chaikina 4, Almaty 050020 (Kazakhstan); Kislitsin, S.B.; Maksimkin, O.P. [Institute of Nuclear Physics, 1 Ibragimova St., Almaty, 050032 (Kazakhstan); Shiganakov, Sh.B.; Chumakov, Ye.V. [Kazakhstan Atomic Energy Committee, Liza Chaikina 4, Almaty (Kazakhstan); Dumchev, I.V. [MAEC Kazatomprom, Aktau, 130000 (Kazakhstan)

2006-07-01T23:59:59.000Z

115

SNF AGING SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts, diagrams, drawings, lists and additional supporting information; and Appendix C is a list of procedures that will be used to operate the system.

L.L. Swanson

2005-04-06T23:59:59.000Z

116

ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

S. Roy

2004-06-24T23:59:59.000Z

117

ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this revision of the System Description Document (SDD) is to establish requirements that drive the design of the electrical power system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience are design engineers. This type of SDD leads and follows the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. This SDD follows the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to this system are obtained from ''Project Functional and Operational Requirements'' (F&OR) (Siddoway, 2003). Other requirements to support the design process have been taken from higher level requirements documents such as ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), the fire hazards analyses, and the preclosure safety analysis. The above mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canori and Leitner 2003) requirements. This SDD includes several appendices with supporting information. Appendix B lists key system charts, diagrams, drawings, and lists; and Appendix C is a list of system procedures.

M. Maniyar

2004-06-22T23:59:59.000Z

118

UV pumping of hyperfine transitions in the light elements, with application to 21-cm hydrogen and 92-cm deuterium lines from the early universe  

E-Print Network [OSTI]

We present new analytic calculations of the coupling between ultraviolet resonance photons and the population of the hyperfine states in the light elements (H, D, He3+) which include several previously neglected physical processes. Among these are the backreaction of resonant scattering on the pumping radiation, the scattering of Ly_beta photons and the effect of local departure from pure Hubble flow. The application of the new treatment to the redshifted hydrogen 21 and deuterium 92 cm lines from the high-redshift universe results in an amplitude correction of up to an order of magnitude. We further show that the standard assumption that ultraviolet pumping drives the spin temperature towards the kinetic temperature does not hold for deuterium, whose spin temperature is generally negative.

Leonid Chuzhoy; Paul R. Shapiro

2006-06-30T23:59:59.000Z

119

Applicability of daylighting computer modeling in real case studies: Comparison between measured and simulated daylight availability and lighting consumption. Building and Environment  

E-Print Network [OSTI]

this paper is published in / Une version de ce document se trouve dans : IEA (International Energy Agency) Task 21 / Annex 29: Daylight in Buildings, November 1998, 68 pp. www.nrc.ca/irc/ircpubs NRCC-42862 Subtask C: Daylighting Design Tools T21/C1-21/CAN/98-11 Applicability of Daylighting Computer Modeling in Real Case Studies: Comparison between Measured and Simulated Daylight Availability and Lighting Consumption A report of IEA SHC Task 21 / IEA ECBCS Annex 29 Daylight in Buildings Subtask C: Daylighting Design Tools Report T21/C1-21/CAN/98-11 Applicability of Daylighting Computer Modeling in Real Case Studies: Comparison between Measured and Simulated Daylight Availability and Lighting Consumption by Anca D. Galasiu * Morad R. Atif * A report of IEA SHC Task 21 / IEA ECBCS Annex 29 * National Research Council Canada, Institute for Research in Construction, Indoor Environment Research Program Subtask C: Daylighting Design Tools Report T21/C1-21/CAN/98-11 IEA Solar Heating and Cooling Programme (IEA SHC) The International Energy Agency (IEA) was established in 1974 as an autonomous agency within the framework of the Economic Cooperation and Development (OECD) to carry out a comprehensive program of energy cooperation among its 24 member countries and the Commission of the European Communities. An important part of the Agency's program involves collaboration in the research, development and demonstration of new energy technologies to reduce excessive reliance on imported oil, increase long-term energy security and reduce greenhouse gas emissions. The IEA's R&D activities are headed by the Committee on Energy Research and Technology (CERT) and supported by a small Secretariat staff, headquartered in Paris. In addition, three Working Parties are charged with monitorin...

A. D. Atif

120

Strategy Guideline: High Performance Residential Lighting  

SciTech Connect (OSTI)

The Strategy Guideline: High Performance Residential Lighting has been developed to provide a tool for the understanding and application of high performance lighting in the home. The high performance lighting strategies featured in this guide are drawn from recent advances in commercial lighting for application to typical spaces found in residential buildings. This guide offers strategies to greatly reduce lighting energy use through the application of high quality fluorescent and light emitting diode (LED) technologies. It is important to note that these strategies not only save energy in the home but also serve to satisfy the homeowner's expectations for high quality lighting.

Holton, J.

2012-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

A global approach of the representativity concept: Application on a high-conversion light water reactor MOX lattice case  

SciTech Connect (OSTI)

The development of new types of reactor and the increase in the safety specifications and requirements induce an enhancement in both nuclear data knowledge and a better understanding of the neutronic properties of the new systems. This enhancement is made possible using ad hoc critical mock-up experiments. The main difficulty is to design these experiments in order to obtain the most valuable information. Its quantification is usually made by using representativity and transposition concepts. These theories enable to extract some information about a quantity of interest (an integral parameter) on a configuration, but generally a posteriori. This paper presents a more global approach of this theory, with the idea of optimizing the representativity of a new experiment, and its transposition a priori, based on a multiparametric approach. Using a quadratic sum, we show the possibility to define a global representativity which permits to take into account several quantities of interest at the same time. The maximization of this factor gives information about all quantities of interest. An optimization method of this value in relation to technological parameters (over-clad diameter, atom concentration) is illustrated on a high-conversion light water reactor MOX lattice case. This example tackles the problematic of plutonium experiment for the plutonium aging and a solution through the optimization of both the over-clad and the plutonium content. (authors)

Santos, N. D.; Blaise, P.; Santamarina, A. [CEA, DEN/DER/SPRC Cadarache, F-13108 Saint Paul-lez-Durance (France)

2013-07-01T23:59:59.000Z

122

E-Print Network 3.0 - alingap light emitting Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: :http:www.eee.hku.hkgpang Abstract The visible light from an LED (light emitting diode) traffic light can be modulated and encoded... on the description of an audio...

123

The shape dynamics description of gravity  

E-Print Network [OSTI]

Classical gravity can be described as a relational dynamical system without ever appealing to spacetime or its geometry. This description is the so-called shape dynamics description of gravity. The existence of relational first principles from which the shape dynamics description of gravity can be derived is a motivation to consider shape dynamics (rather than GR) as the fundamental description of gravity. Adopting this point of view leads to the question: What is the role of spacetime in the shape dynamics description of gravity? This question contains many aspects: Compatibility of shape dynamics with the description of gravity in terms of spacetime geometry, the role of local Minkowski space, universality of spacetime geometry and the nature of quantum particles, which can no longer be assumed to be irreducible representations of the Poincare group. In this contribution I derive effective spacetime structures by considering how matter fluctuations evolve along with shape dynamics. This evolution reveals an "experienced spacetime geometry." This leads (in an idealized approximation) to local Minkowski space and causal relations. The small scale structure of the emergent geometric picture depends on the specific probes used to experience spacetime, which limits the applicability of effective spacetime to describe shape dynamics. I conclude with discussing the nature of quantum fluctuations (particles) in shape dynamics and how local Minkowski spacetime emerges from the evolution of quantum particles.

Tim Koslowski

2015-01-13T23:59:59.000Z

124

Student Ambassador Job description  

E-Print Network [OSTI]

Blue 1 Student Ambassador Job description Department: Student Administration and Registry Location: Varies - as advised by the UK Student Recruitment and Outreach Team Job title: Student Ambassador Responsible to: UK Student Recruitment and Outreach Team Payment and benefits: £6.42 per hour Duration

Anderson, Jim

125

Development of a body force description for compressor stability assessment  

E-Print Network [OSTI]

This thesis presents a methodology for a body force description of a compressor with particular application to compressor stability calculations. The methodology is based on extracting blade forces from an axisymmetric ...

Kiwada, George (George Ford)

2008-01-01T23:59:59.000Z

126

Description of isoscalar giant dipole resonance in nuclei  

E-Print Network [OSTI]

Applicability of the Hartree-Fock (HF) based random phase approximation (RPA) with several Skyrme effective interactions to the description of the isoscalar giant monopole (ISGMR) and the isoscalar giant dipole resonance (ISGDR) in 90Zr, 116Sn, 144...

Pochivalov, Oleksiy Grigorievich

2009-05-15T23:59:59.000Z

127

SURFACE INDUSTRIAL HVAC SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this system description document (SDD) is to establish requirements that drive the design of the surface industrial heating, ventilation, and air-conditioning (HVAC) system and its bases to allow the design effort to proceed to license application. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. The SDD follows the design with regard to the description of the system. The description that provided in this SDD reflects the current results of the design process.

M.M. Ansari

2005-04-05T23:59:59.000Z

128

Smart Lighting Controller!! Smart lighting!  

E-Print Network [OSTI]

1! Smart Lighting Controller!! #12;2! Smart lighting! No need to spend energy lighting the room if://blogs.stthomas.edu/realestate/2011/01/24/residential-real-estate-professionals-how-do-you- develop feedback! There is a connection between the output and the input! Therefore forces inputs to same voltage

Anderson, Betty Lise

129

Ab initio calculations of light-ion fusion reactions  

SciTech Connect (OSTI)

The exact treatment of nuclei starting from the constituent nucleons and the fundamental interactions among them has been a long-standing goal in nuclear physics. Above all nuclear scattering and reactions, which require the solution of the many-body quantum-mechanical problem in the continuum, represent an extraordinary theoretical as well as computational challenge for ab initio approaches. The ab initio No-Core Shell Model/Resonating-Group Method (NCSM/RGM) complements a microscopic cluster technique with the use of realistic interactions, and a microscopic and consistent description of the nucleon clusters. This approach is capable of describing simultaneously both bound and scattering states in light nuclei. Recent applications to light nuclei scattering and fusion reactions relevant to energy production in stars and Earth based fusion facilities, such as the deuterium-{sup 3}He fusion, are presented. Progress toward the inclusion of the three nucleon force into the formalism is outlined.

Hupin, G.; Quaglioni, S.; Navratil, P. [Lawrence Livermore National Laboratory, P.O. Box 808, L-414, Livermore, California 94551 (United States); TRIUMF, 4004 Wesbrook Mall, Vancouver, British Columbia, V6T 2A3 (Canada) and Lawrence Livermore National Laboratory, P. O. Box 808, L-414, Livermore, California 94551 (United States)

2012-10-20T23:59:59.000Z

130

Detailed Description of Key NIF Milestones for NNSA Description  

E-Print Network [OSTI]

1 Detailed Description of Key NIF Milestones for NNSA Short Description NIC EP Rev 4.0 Approved = Milestone Reporting Tool, which NNSA uses to support quarterly status reporting of NIC Level 1-2 milestones

131

Light-Front Holography and Non-Perturbative QCD  

SciTech Connect (OSTI)

The combination of Anti-de Sitter space (AdS) methods with light-front holography leads to a semi-classical first approximation to the spectrum and wavefunctions of meson and baryon light-quark bound states. Starting from the bound-state Hamiltonian equation of motion in QCD, we derive relativistic light-front wave equations in terms of an invariant impact variable {zeta} which measures the separation of the quark and gluonic constituents within the hadron at equal light-front time. These equations of motion in physical space-time are equivalent to the equations of motion which describe the propagation of spin-J modes in anti-de Sitter (AdS) space. Its eigenvalues give the hadronic spectrum, and its eigenmodes represent the probability distribution of the hadronic constituents at a given scale. Applications to the light meson and baryon spectra are presented. The predicted meson spectrum has a string-theory Regge form M{sup 2} = 4{kappa}{sup 2}(n + L + S = 2); i.e., the square of the eigenmass is linear in both L and n, where n counts the number of nodes of the wavefunction in the radial variable {zeta}. The space-like pion form factor is also well reproduced. One thus obtains a remarkable connection between the description of hadronic modes in AdS space and the Hamiltonian formulation of QCD in physical space-time quantized on the light-front at fixed light-front time {tau}. The model can be systematically improved by using its complete orthonormal solutions to diagonalize the full QCD light-front Hamiltonian or by applying the Lippmann-Schwinger method in order to systematically include the QCD interaction terms.

Brodsky, Stanley J.; /SLAC; de Teramond, Guy F.; /Costa Rica U.

2009-12-09T23:59:59.000Z

132

FEMP Outdoor Solid-State Lighting Intiative: Resources for Outdoor...  

Broader source: Energy.gov (indexed) [DOE]

sheet describes the Federal Energy Management Program's (FEMP) solid-state lighting (SSL) initiatives that provide information and resources for the application of SSL lighting...

133

Commercial Lighting and LED Lighting Incentives  

Broader source: Energy.gov [DOE]

Incentives for energy efficient commercial lighting equipment as well as commercial LED lighting equipment are available to businesses under the Efficiency Vermont Lighting and LED Lighting...

134

White light emitting diode as liquid crystal display backlight ; High brightness light emitting diode as liquid crystal display backlight .  

E-Print Network [OSTI]

??The discovery of high brightness (white) light emitting diode (LED) is considered as a real threat to the current lighting industry in various applications. One… (more)

Soon, Chian Myau

2007-01-01T23:59:59.000Z

135

Light-Emitting Diodes in the Solid-State Lighting Systems  

E-Print Network [OSTI]

Red and green light-emitting diodes (LEDs) had been produced for several decades before blue emitting diodes, suitable for lighting applications, were widely available. Today, we have the possibility of combining the three fundamental colours to have a bright white light. And therefore, a new form of lighting, the solid-state lighting, has now become a reality. Here we discuss LEDs and some of their applications in displays and lamps.

Sparavigna, Amelia Carolina

2014-01-01T23:59:59.000Z

136

Lighting Renovations  

Broader source: Energy.gov [DOE]

When undertaking a lighting renovation in a Federal building, daylighting is the primary renewable energy opportunity. Photovoltaics (PV) also present an excellent opportunity. While this guide...

137

Cerenkov Light  

ScienceCinema (OSTI)

The bright blue glow from nuclear reactors is Cerenkov light. Karl Slifer describes how nuclear physicists can use this phenomenon to study the nucleus of the atom.

Slifer, Karl

2014-05-22T23:59:59.000Z

138

Cerenkov Light  

SciTech Connect (OSTI)

The bright blue glow from nuclear reactors is Cerenkov light. Karl Slifer describes how nuclear physicists can use this phenomenon to study the nucleus of the atom.

Slifer, Karl

2013-06-13T23:59:59.000Z

139

Radioluminescent polymer lights  

SciTech Connect (OSTI)

The preparation of radioluminescent light sources where the tritium is located on the aryl-ring in a polymer has been demonstrated with deuterium/tritium substitution. This report discusses tests, results, and future applications of radioluminescent polymers. 10 refs. (FI)

Jensen, G.A.; Nelson, D.A.; Molton, P.M.

1990-09-01T23:59:59.000Z

140

Aerospace Applications for OLED Lighting  

Energy Savers [EERE]

2015 Boeing. All rights reserved. Export Controlled ECCN: 9E991 NLR Aerospace economics drive long development cycles and even longer product lifecycles * Development of a...

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Radioluminescent lighting technology  

SciTech Connect (OSTI)

The glow-in-the-dark stereotype that characterizes the popular image of nuclear materials is not accidental. When the French scientist, Henri Becquerel, first discovered radioactivity in 1896, he was interested in luminescence. Radioluminescence, the production of light from a mixture of energetic and passive materials, is probably the oldest practical application of the unstable nucleus. Tritium-based radioluminescent lighting, in spite of the biologically favorable character of the gaseous tritium isotope, was included in the general tightening of environmental and safety regulations. Tritium light manufacturers would have to meet two fundamental conditions: (1) The benefit clearly outweighed the risk, to the extent that even the perceived risk of a skeptical public would be overcome. (2) The need was significant enough that the customer/user would be willing and able to afford the cost of regulation that was imposed both in the manufacture, use and eventual disposal of nuclear materials. In 1981, researchers at Oak Ridge National Laboratory were investigating larger radioluminescent applications using byproduct nuclear material such as krypton-85, as well as tritium. By 1982, it appeared that large source, (100 Curies or more) tritium gas tube, lights might be useful for marking runways and drop zones for military operations and perhaps even special civilian aviation applications. The successful development of this idea depended on making the light bright enough and demonstrating that large gas tube sources could be used and maintained safely in the environment. This successful DOE program is now in the process of being completed and closed-out. Working closely with the tritium light industry, State governments and other Federal agencies, the basic program goals have been achieved. This is a detailed report of what they have learned, proven, and discovered. 91 refs., 29 figs., 5 tabs. (JF)

Not Available

1990-01-01T23:59:59.000Z

142

YUCCA MOUNTAIN SITE DESCRIPTION  

SciTech Connect (OSTI)

The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

A.M. Simmons

2004-04-16T23:59:59.000Z

143

Photon Statistics of Semiconductor Light Sources.  

E-Print Network [OSTI]

??In recent years, semiconductor light sources have become more and more interesting in terms of applications due to their high efficiency and low cost. Advanced… (more)

Aßmann, Marc

2010-01-01T23:59:59.000Z

144

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (Regular; Twelve and ledges and clean fixtures. Maintain building entrances according to conditions by removing snow and ice

Endres. William J.

145

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (9 month, part according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

146

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (9 month, full according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

147

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (9 month, full and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying

148

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (Regular; Twelve according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

149

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12-month, full according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

150

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: BUILDING MECHANIC II (Pay, parking lots, elevators, snow conditions, HVAC equipment temperature control systems, pool systems, ice

151

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN/EVENT ASSOCIATE entrances according to conditions by removing snow and ice, applying sand and salt, and removing debris

152

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12-month, full and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying

153

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12 month, part according to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere

154

Student Internship Programs Program Description  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Student Internship Programs Program Description The objective of the Laboratory's student internship programs is to provide students with opportunities for meaningful hands- on...

155

University of Chicago Description  

E-Print Network [OSTI]

? The first self-sustaining, synthetic nuclear reaction occurred in an underground racket ball court or in International House (a private entity affiliated with the University) and housing is guaranteed for students who submit their application on time. Details are available on the Housing Office website. Courses

Bristol, University of

156

Nagoya University Description  

E-Print Network [OSTI]

is a friendly, bustling industrial port city, and is the site of Toyota HQ (whose plant you can visit to watch their amazing robot workforce). Don't miss the festivals at Atsuta-jing, one of the most important Shinto for a JASSO Scholarship. Apply Once you have completed the UoB online application and been allocated a space

Bristol, University of

157

INTO Colorado State University, Academic Advisor: Short Description Position Description  

E-Print Network [OSTI]

INTO Colorado State University, Academic Advisor: Short Description Position Description INTO Colorado State University (INTO CSU) seeks one full-time, 12-month academic advisor who will advise INTO CSU students. The primary responsibility of the academic advisor is to promote and facilitate

Stephens, Graeme L.

158

APPLICATION CONSTRUCTION LEADERSHIP COURSE  

E-Print Network [OSTI]

APPLICATION CONSTRUCTION LEADERSHIP COURSE RECOMMENDATION FORM CON464 Construction Leadership: __________________________ To be considered for the Construction Leadership course submit the following: Application with description in the construction industry 5) If your GPA

Stephens, Graeme L.

159

Description of the Scenario Machine  

E-Print Network [OSTI]

We present here an updated description of the "Scenario Machine" code. This tool is used to carry out a population synthesis of binary stars. Previous version of the description can be found at http://xray.sai.msu.ru/~mystery//articles/review/contents.html

V. M. Lipunov; K. A. Postnov; M. E. Prokhorov; A. I. Bogomazov

2007-04-11T23:59:59.000Z

160

Web Page Development Company Description  

E-Print Network [OSTI]

Web Page Development Company Description: Service Provider web site Short Project Name: Research support and networking. Company Description: Website Building Company. This company drives traffic to websites through search engines, and optimizes websites over time. Short Project Name: Site Build Project

Dahl, David B.

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Solid State Lighting ECE 198 Lab Manual  

E-Print Network [OSTI]

will take the role of a consultant to either a large company, a government institution, or an academic A significant fraction of the electricity used in this country is used for lighting applications, whether countries require sources of light, there has been a significant increase in light consumption globally

Wasserman, Daniel M.

162

Energy Conversion: Solid-State Lighting  

E-Print Network [OSTI]

8 Energy Conversion: Solid-State Lighting E. Kioupakis1,2 , P. Rinke1,3 , A. Janotti1 , Q. Yan1 fraction of the world's energy resources [1]. Lighting has been one of the earliest applications. The inefficiency of existing light sources that waste most of the power they consume is the reason for this large

163

Light Computing  

E-Print Network [OSTI]

A configuration of light pulses is generated, together with emitters and receptors, that allows computing. The computing is extraordinarily high in number of flops per second, exceeding the capability of a quantum computer for a given size and coherence region. The emitters and receptors are based on the quantum diode, which can emit and detect individual photons with high accuracy.

Gordon Chalmers

2006-10-13T23:59:59.000Z

164

Metastable light induced defects in pentacene  

SciTech Connect (OSTI)

In this study we analyzed one of the environmental factors that could affect organic materials. Pentacene thin film samples were fabricated and the degradation of their electrical characteristics was measured when the devices were exposed to ultraviolet light irradiation. The results have been reported in terms of a trap density model, which provides a description of the dynamics of light induced electrically active defects in an organic semiconductor.

Liguori, R.; Aprano, S.; Rubino, A. [Department of Industrial Engineering (DIIn), University of Salerno, via Giovanni Paolo II, 132, 84084 Fisciano (Italy)

2014-02-21T23:59:59.000Z

165

LED Traffic Light as a Communications Device Grantham Pang, Thomas Kwan, Chi-Ho Chan, Hugh Liu.  

E-Print Network [OSTI]

:http://www.eee.hku.hk/~gpang Abstract The visible light from an LED (light emitting diode) traffic light can be modulated and encoded on the description of an audio information system made up of high brightness, visible light emitting diodes (LEDs messages 1. Introduction Recently, high intensity light emitting diodes for traffic signals are available

Pang, Grantham

166

Description Plants ESIS ESD FSGD  

E-Print Network [OSTI]

Ecological Site Description Plants ESIS ESD FSGD ESI Forestland ESI Rangeland Data Access > Return CHARACTERISTICS Site Type: Rangeland Site Name: Red Sandy Loam 25-32" PZ Site ID: R082AY369TX Major Land Resource

167

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION Job Title: DIRECTOR Department: CENTER faculty in developing and assessing course goals in support of program and university learning goals for online and blended learning. Provide assistance in evaluating and implementing educational technologies

Endres. William J.

168

The Description of Large Systems  

E-Print Network [OSTI]

In this paper we discuss the problems associated with the description and manipulation of large systems when their sources are not maintained as single fields. We show why and how tools that address these issues, such ...

Pitman, Kent

1984-09-01T23:59:59.000Z

169

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN/EVENT ASSOCIATE to conditions by removing snow and ice, applying sand and salt, and removing debris. Adhere to current uniform

Endres. William J.

170

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12 month/40 and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying be exercised over seasonal/temporary university employees and student assistants. QUALIFICATION REQUIREMENTS

171

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12 month and ice, applying sand and salt, and removing debris. Adhere to current department uniform policy supervision may be exercised over seasonal/temporary university employees and student assistants

172

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (12 mos and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying be exercised over seasonal/temporary university employees and student assistants. QUALIFICATION REQUIREMENTS

173

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: CUSTODIAN (9 month/20 hours and clean fixtures. Maintain building entrances according to conditions by removing snow and ice, applying be exercised over seasonal/temporary university employees and student assistants. QUALIFICATION REQUIREMENTS

174

Museum Educator Volunteer Job Description  

E-Print Network [OSTI]

Museum Educator Volunteer Job Description The Beaty Biodiversity Museum, a new museum housing UBC's rich biological collections, is dedicated to enhancing to the public. Volunteer Museum Educators play a vital role in the museum mission

Pulfrey, David L.

175

Windows and lighting program  

SciTech Connect (OSTI)

More than 30% of all energy use in buildings is attributable to two sources: windows and lighting. Together they account for annual consumer energy expenditures of more than $50 billion. Each affects not only energy use by other major building systems, but also comfort and productivity -- factors that influence building economics far more than does direct energy consumption alone. Windows play a unique role in the building envelope, physically separating the conditioned space from the world outside without sacrificing vital visual contact. Throughout the indoor environment, lighting systems facilitate a variety of tasks associated with a wide range of visual requirements while defining the luminous qualities of the indoor environment. Windows and lighting are thus essential components of any comprehensive building science program. Despite important achievements in reducing building energy consumption over the past decade, significant additional savings are still possible. These will come from two complementary strategies: (1) improve building designs so that they effectively apply existing technologies and extend the market penetration of these technologies; and (2) develop advanced technologies that increase the savings potential of each application. Both the Windows and Daylighting Group and the Lighting System Research Group have made substantial contributions in each of these areas, and continue to do so through the ongoing research summarized here. 23 refs., 16 figs.

Not Available

1990-06-01T23:59:59.000Z

176

Strong blue and white photoluminescence emission of BaZrO{sub 3} undoped and lanthanide doped phosphor for light emitting diodes application  

SciTech Connect (OSTI)

In this paper, we report the obtained strong broadband blue photoluminescence (PL) emission centered at 427 nm for undoped BaZrO{sub 3} observed after 266 nm excitation of submicron crystals prepared by hydrothermal/calcinations method. This emission is enhanced with the introduction of Tm{sup 3+} ions and is stronger than the characteristic PL blue emission of such lanthanide. The proposed mechanism of relaxation for host lattice emission is based on the presence of oxygen vacancies produced during the synthesis process and the charge compensation due to the difference in the electron valence between dopant and substituted ion in the host. Brilliant white light emission with a color coordinate of (x=0.29, y=0.32) was observed by combining the blue PL emission from the host with the green and red PL emission from Tb{sup 3+} and Eu{sup 3+} ions, respectively. The color coordinate can be tuned by changing the ratio between blue, green and red band by changing the concentration of lanthanides. - Graphical abstract: Strong blue emission from undoped BaZrO{sub 3} phosphor and white light emission by doping with Tb{sup 3+} (green) and Eu{sup 3+} (red) after 266 nm excitation. Highlights: Black-Right-Pointing-Pointer Blue emission from BaZrO{sub 3} phosphor. Black-Right-Pointing-Pointer Blue emission enhanced with Tm{sup 3+}. Black-Right-Pointing-Pointer White light from BaZrO{sup 3+} phosphor.

Romero, V.H. [Centro de Investigaciones en Optica, A. P. 1-948, Leon Gto., 37160 (Mexico)] [Centro de Investigaciones en Optica, A. P. 1-948, Leon Gto., 37160 (Mexico); De la Rosa, E., E-mail: elder@cio.mx [Centro de Investigaciones en Optica, A. P. 1-948, Leon Gto., 37160 (Mexico); Salas, P. [Centro de Fisica Aplicada y Tecnologia Avanzada, Universidad Nacional Autonoma de Mexico, A.P. 1-1010, Queretaro, Qro. 76000 (Mexico)] [Centro de Fisica Aplicada y Tecnologia Avanzada, Universidad Nacional Autonoma de Mexico, A.P. 1-1010, Queretaro, Qro. 76000 (Mexico); Velazquez-Salazar, J.J. [Department of Physics and Astronomy, The University of Texas at San Antonio One UTSA Circle, San Antonio TX 78249 (United States)] [Department of Physics and Astronomy, The University of Texas at San Antonio One UTSA Circle, San Antonio TX 78249 (United States)

2012-12-15T23:59:59.000Z

177

Grant Application Package CFDA Number  

E-Print Network [OSTI]

Grant Application Package CFDA Number: Opportunity Title: Offering Agency: Agency Contact: Opportunity Open Date: Opportunity Close Date: CFDA Description: Opportunity Number: Competition ID

Talley, Lynne D.

178

Light Source  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 LawrenceEfeedstocks and the climateLife a Light

179

Light' Darkness  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 LawrenceEfeedstocks and the climateLifeLight to

180

Residential Lighting  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared atEffectquestionnairesU.S. EnergyEnergy EfficiencyLighting

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Nonequilibrium lighting plasmas  

SciTech Connect (OSTI)

In this paper the science of a variety of devices employing nonequilibrium lighting plasmas is reviewed. The devices include the fluorescent lamp, the low-pressure sodium lamp, the neon sign, ultraviolet lamps, glow indicators, and a variety of devices used by spectroscopists, such as the hollow cathode light source. The plasma conditions in representative commercial devices are described. Recent research on the electron gas, the role of heavy particles, spatial and temporal inhomogeneities, and new electrodeless excitation schemes is reviewed. Areas of future activity are expected to be in new applications of high-frequency electronics to commercial devices, new laser-based diagnostics of plasma conditions, and more sophisticated models requiring more reliable and extensive rate coefficient data.

Dakin, J.T. (GE Lighting, Nela Park, Cleveland, OH (US))

1991-12-01T23:59:59.000Z

182

Light Water Reactor Sustainability  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

3 Light Water Reactor Sustainability Program ACCOMPLISHMENTS REPORT 2013 Accomplishments Report | Light Water Reactor Sustainability 2 T he mission of the Light Water Reactor...

183

Light Water Reactor Sustainability  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

4 Light Water Reactor Sustainability ACCOMPLISHMENTS REPORT 2014 Accomplishments Report | Light Water Reactor Sustainability 2 T he mission of the Light Water Reactor...

184

Scope and Description Laboratory Robotics and Automation seeks to  

E-Print Network [OSTI]

#12;Scope and Description Laboratory Robotics and Automation seeks to communicate developments and information about the automation of the laboratory. Application areas generally include analytical peripherals, and other robotics developments that may have an impact on laboratory automation. In the area

Kostic, Milivoje M.

185

Technical descriptions of ten irrigation technologies for conserving energy  

SciTech Connect (OSTI)

Technical description of ten technologies which were researched to save energy in irrigated agriculture are presented. These technologies are: well design and development ground water supply system optimization, column and pump redesign, variable-speed pumping, pipe network optimization, reduced-pressure center-pivot systems, low-energy precision application, automated gated-pipe system, computerized irrigation scheduling, and instrumented irrigation scheduling. (MHR)

Harrer, B.J.; Wilfert, G.L.

1983-05-01T23:59:59.000Z

186

Detaled description of spontaneous emission  

E-Print Network [OSTI]

The wave side of wave-photon duality, describing light as an electromagnetic field (EMF), is used in this article. EMF of spontaneous light emission (SE) of laser excited atom is calculated from first principles for the first time. This calculation is done using simple method of atomic quantum electrodynamics. EMF of SE is calculated also for three types of polyatomic light sources excited by laser. It is shown that light radiated by such sources can be coherent, which explains recent experiments on SE of laser excited atoms. Small sources of SE can be superradiant, which also conforms to experiment. Thus SE is shown not to be a random event itself. Random properties of natural light are simply explained as a result of thermal excitation randomness without additional hypotheses. EMF of SE is described by simple complex functions but not real ones.

Marat Guryev

2012-11-29T23:59:59.000Z

187

AdS/QCD and Light Front Holography: A New Approximation to QCD  

SciTech Connect (OSTI)

The combination of Anti-de Sitter space (AdS) methods with light-front holography leads to a semi-classical first approximation to the spectrum and wavefunctions of meson and baryon light-quark bound states. Starting from the bound-state Hamiltonian equation of motion in QCD, we derive relativistic light-front wave equations in terms of an invariant impact variable {zeta} which measures the separation of the quark and gluonic constituents within the hadron at equal light-front time. These equations of motion in physical space-time are equivalent to the equations of motion which describe the propagation of spin-J modes in anti-de Sitter (AdS) space. Its eigenvalues give the hadronic spectrum, and its eigenmodes represent the probability distribution of the hadronic constituents at a given scale. Applications to the light meson and baryon spectra are presented. The predicted meson spectrum has a string-theory Regge form M{sup 2} = 4{kappa}{sup 2}(n+L+S/2); i.e., the square of the eigenmass is linear in both L and n, where n counts the number of nodes of the wavefunction in the radial variable {zeta}. The space-like pion form factor is also well reproduced. One thus obtains a remarkable connection between the description of hadronic modes in AdS space and the Hamiltonian formulation of QCD in physical space-time quantized on the light-front at fixed light-front time {tau}. The model can be systematically improved by using its complete orthonormal solutions to diagonalize the full QCD light-front Hamiltonian or by applying the Lippmann-Schwinger method in order to systematically include the QCD interaction terms.

Brodsky, Stanley J.; de Teramond, Guy

2010-02-15T23:59:59.000Z

188

Energy Savings Potential of Solid-State Lighting in General Illuminati...  

Broader source: Energy.gov (indexed) [DOE]

PROGRAM Energy Savings Potential of Solid-State Lighting in General Illumination Applications January 2012 Prepared for: Solid-State Lighting Program Building Technologies Program...

189

artificial light-harvesting complex: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

world have been striving to develop artificial light-harvesting antenna model systems for energy and other light-driven biochemical applications. Among the various approaches...

190

Advances in Lighting  

E-Print Network [OSTI]

colour rendition. The quartz-halogen incandescent lam s operate at higher temperatures, and have a somewhat higher efficacy, but they are rarely used except for special applicati ns. 3-2 High Intensity Discharge Lamps. Mercury is the grandfather... of the H.I.D. lamps. Its blue-green light, has been used almost exclusively for streetlighti and, often with colour-improving phospho it is still being used in industrial and commercial applications. Reactor-type ballasted mercury lamps can now...

Tumber, A. J.

1981-01-01T23:59:59.000Z

191

Light front Casimir effect at finite temperature  

E-Print Network [OSTI]

The correct description of the standard Casimir effect for periodic boundary conditions via light front formalism implies in these conditions imposed at fixed Minkowski times [Almeida {\\it et al.} Phys. Rev. {\\bf D 87}, 065028 (2013); Chabysheva and Hiller, Phys. Rev. {\\bf D 88}, 085006 (2013)] instead of fixed light front times. The unphysical nature of this latter condition is manifested in the vacuum part by no regularization yielding a finite Casimir energy density [Lenz and Steinbacher, Phys. Rev. {\\bf D 67}, 045010 (2003)]. In the present paper, we extend this discussion and analyze the problem of the light front quantization with simultaneous presence of a thermal bath and boundary conditions. Considering both the oblique light front as well as Dirac light front coordinates, we show that the imposition of periodic boundary conditions at fixed Minkowski times recovers the expected behaviors for the energy density and Casimir entropy. We also investigate how the unphysical nature of the periodic boundary...

Rodrigues, P L M; Alves, Danilo T; Alves, Van Sérgio; Silva, Charles R

2015-01-01T23:59:59.000Z

192

A fast-switching light-writable and electric-erasable negative photoelectrochromic cell based on Prussian blue films  

E-Print Network [OSTI]

glazing in response to illumina- tion, with promising applications in smart windows, sunglasses and light

Demir, Hilmi Volkan

193

Non-equilibrium quantum systems: Divergence between global and local descriptions  

E-Print Network [OSTI]

Even photosynthesis -- the most basic natural phenomenon underlying Life on Earth -- involves the non-trivial processing of excitations at the pico- and femtosecond scales during light-harvesting. The desire to understand such natural phenomena, as well as interpret the output from ultrafast experimental probes, creates an urgent need for accurate quantitative theories of open quantum systems. However it is unclear how best to generalize the well-established assumptions of an isolated system, particularly under non-equilibrium conditions. Here we compare two popular approaches: a description in terms of a direct product of the states of each individual system (i.e. a local approach) versus the use of new states resulting from diagonalizing the whole Hamiltonian (i.e. a global approach). We show that their equivalence fails when the system is open, in particular under the experimentally ubiquitous condition of a temperature gradient. By solving for the steady-state populations and calculating the heat flux as a test observable, we uncover stark differences between the formulations. This divergence highlights the need to establish rigorous ranges of applicability for such methods in modeling nanoscale transfer phenomena -- including during the light-harvesting process in photosynthesis.

Pedro D. Manrique; Ferney Rodriguez; Luis Quiroga; Neil F. Johnson

2015-02-24T23:59:59.000Z

194

Sustainable Office Lighting Options  

E-Print Network [OSTI]

Sustainable Office Lighting Options Task Lighting: Task lighting is a localized method of lighting a workspace so that additional, unnecessary lighting is eliminated, decreasing energy usage and costs. Illumination levels in the targeted work areas are higher with task lighting than with the ambient levels

Massachusetts at Amherst, University of

195

Controls for Solid-State Lighting  

SciTech Connect (OSTI)

This study predicts new hybrid lighting applications for LEDs. In hybrid lighting, LEDs provide a low-energy 'standby' light level while another, more powerful, efficient light source provides light for occupied periods. Lighting controls will allow the two light sources to work together through an appropriate control strategy, typically motion-sensing. There are no technical barriers preventing the use of low through high CRI LEDs for standby lighting in many interior and exterior applications today. The total luminous efficacy of LED systems could be raised by increasing the electrical efficiency of LED drivers to the maximum practically achievable level (94%). This would increase system luminous efficacy by 20-25%. The expected market volumes for many types of LEDs should justify the evolution of new LED drivers that use highly efficient ICs and reduce parts count by means of ASICs. Reducing their electronics parts count by offloading discrete components onto integrated circuits (IC) will allow manufacturers to reduce the cost of LED driver electronics. LED luminaire manufacturers will increasingly integrate the LED driver and thermal management directly in the LED fixture. LED luminaires of the future will likely have no need for separable lamp and ballast because the equipment life of all the LED luminaire components will all be about the same (50,000 hours). The controls and communications techniques used for communicating with conventional light sources, such as dimmable fluorescent lighting, are appropriate for LED illumination for energy management purposes. DALI has been used to control LED systems in new applications and the emerging ZigBee protocol could be used for LEDs as well. Major lighting companies are already moving in this direction. The most significant finding is that there is a significant opportunity to use LEDs today for standby lighting purposes. Conventional lighting systems can be made more efficient still by using LEDs to provide a low-energy standby state when lower light levels are acceptable.

Rubinstein, Francis

2007-06-22T23:59:59.000Z

196

Sustainable Internet Architecture PROJECT DESCRIPTION  

E-Print Network [OSTI]

Sustainable Internet Architecture PROJECT DESCRIPTION 1 Introduction The Internet currently plays that the problems in the current Internet architecture stem from its lack of sustainability which impedes future de of challenges. Numerous research studies on a new Internet architecture (e.g., [16, 37, 48, 54, 55]) have

Kuzmanovic, Aleksandar

197

Project Description July 13, 2006  

E-Print Network [OSTI]

Project Description July 13, 2006 1 Results from Prior NSF Support The Department of Physics. The grant period started May 1, 1995 with a duration of twenty-four months. In this project video technology' learning of the fundamental ideas of Newtonian mechanics. With the use of low-cost video cameras

Gilfoyle, Jerry

198

Project Description Executive Summary Report  

E-Print Network [OSTI]

$Total Project Cost: 1,000,000Auxillary Enterprises Balances $ 9,400,000Revenue Financing System Bonds $ 1Project Description Executive Summary Report Project Information Project Budget Project Funding 302-680 Parking Structure Phase I This project consists of a 750 space parking garage of approximately 251

O'Toole, Alice J.

199

RF test bench automation Description  

E-Print Network [OSTI]

RF test bench automation Description: Callisto would like to implement automated RF test bench. Three RF test benches have to be studied and automated: LNA noise temperature test bench LNA gain phase of the test benches and an implementation of the automation phase. Tasks: Noise temperature

Dobigeon, Nicolas

200

THE UNIVERSITY OF CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

1 THE UNIVERSITY OF ROCHESTER CLASSIFICATION DESCRIPTION TITLE: Web Specialist and Analyst DATE: 01 ­ Advancement Service and provide assistance in the development and management of web-based assets, direct solicitations support ­ webpages for print and e-mail marketing support, web development, Share

Portman, Douglas

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

ARCHITECTURE PROGRAMS AND COURSE DESCRIPTIONS  

E-Print Network [OSTI]

2009­2010 ARCHITECTURE PROGRAMS AND COURSE DESCRIPTIONS UNIVERSITY OF MICHIGAN #12;© 2008, degree options, and courses for the UM architecture program. This document is available for download from the Taubman College website at http://www.TaubmanCollege. umich.edu/architecture/bulletin/. If you

Kamat, Vineet R.

202

Westinghouse Lighting: Order (2010-CE-09/1001)  

Broader source: Energy.gov [DOE]

DOE ordered Westinghouse Lighting Corporation to pay a $50,000 civil penalty after finding Westinghouse Lighting had failed to certify that certain models of general service flourescent and incandescent reflector lamps comply with the applicable energy conservation standards.

203

White light emitting diode as liquid crystal display backlight  

E-Print Network [OSTI]

The discovery of high brightness (white) light emitting diode (LED) is considered as a real threat to the current lighting industry in various applications. One of the most promising sectors would be using white LED to ...

Soon, Chian Myau

2007-01-01T23:59:59.000Z

204

High Mg-content wurtzite MgZnO alloys and their application in deep-ultraviolet light-emitters pumped by accelerated electrons  

SciTech Connect (OSTI)

High Mg-content single-phase wurtzite MgZnO alloys with a bandgap of 4.35?eV have been obtained on sapphire substrate by introducing a composition-gradient Mg{sub x}Zn{sub 1?x}O buffer layer. By employing the accelerated electrons obtained in a solid-state structure as an excitation source, an emission at around 285?nm, which is originated from the near-band-edge emission of the Mg{sub 0.51}Zn{sub 0.49}O active layer, has been observed. The results reported in this paper may provide a promising route to high performance deep-ultraviolet light-emitting devices by bypassing the challenging doping issues of wide bandgap semiconductors.

Ni, Pei-Nan [State Key Laboratory of Luminescence and Applications, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Shan, Chong-Xin, E-mail: shancx@ciomp.ac.cn, E-mail: shendz@ciomp.ac.cn; Li, Bing-Hui; Shen, De-Zhen, E-mail: shancx@ciomp.ac.cn, E-mail: shendz@ciomp.ac.cn [State Key Laboratory of Luminescence and Applications, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033 (China)

2014-01-20T23:59:59.000Z

205

Thermally activated delayed fluorescence from {sup 3}n?* to {sup 1}n?* up-conversion and its application to organic light-emitting diodes  

SciTech Connect (OSTI)

Intense n?* fluorescence from a nitrogen-rich heterocyclic compound, 2,5,8-tris(4-fluoro-3-methylphenyl)-1,3,4,6,7,9,9b-heptaazaphenalene (HAP-3MF), is demonstrated. The overlap-forbidden nature of the n?* transition and the higher energy of the {sup 3}??* state than the {sup 3}n?* one lead to a small energy difference between the lowest singlet (S{sub 1}) and triplet (T{sub 1}) excited states of HAP-3MF. Green-emitting HAP-3MF has a moderate photoluminescence quantum yield of 0.26 in both toluene and doped film. However, an organic light-emitting diode containing HAP-3MF achieved a high external quantum efficiency of 6.0%, indicating that HAP-3MF harvests singlet excitons through a thermally activated T{sub 1} ? S{sub 1} pathway in the electroluminescent process.

Li, Jie; Zhang, Qisheng; Nomura, Hiroko [Department of Chemistry and Biochemistry, and Center for Organic Photonics and Electronics Research (OPERA), Kyushu University, 744 Motooka, Nishi, Fukuoka 819-0395 (Japan); Miyazaki, Hiroshi [Department of Chemistry and Biochemistry, and Center for Organic Photonics and Electronics Research (OPERA), Kyushu University, 744 Motooka, Nishi, Fukuoka 819-0395 (Japan); Functional Materials Laboratory, Nippon Steel and Sumikin Chemical Co., Ltd, 46–80 Nakabaru, Sakinohama, Tobata, Kitakyushu, Fukuoka 804–8503 (Japan); Adachi, Chihaya, E-mail: adachi@cstf.kyushu-u.ac.jp [Department of Chemistry and Biochemistry, and Center for Organic Photonics and Electronics Research (OPERA), Kyushu University, 744 Motooka, Nishi, Fukuoka 819-0395 (Japan); International Institute for Carbon Neutral Energy Research (WPI-I2CNER), Kyushu University, 744 Motooka, Nishi, Fukuoka 819-0395 (Japan)

2014-07-07T23:59:59.000Z

206

Inversion by metalorganic chemical vapor deposition from N- to Ga-polar gallium nitride and its application to multiple quantum well light-emitting diodes  

SciTech Connect (OSTI)

We demonstrate a metalorganic chemical vapor deposition growth approach for inverting N-polar to Ga-polar GaN by using a thin inversion layer grown with high Mg flux. The introduction of this inversion layer allowed us to grow p-GaN films on N-polar GaN thin film. We have studied the dependence of hole concentration, surface morphology, and degree of polarity inversion for the inverted Ga-polar surface on the thickness of the inversion layer. We then use this approach to grow a light emitting diode structure which has the MQW active region grown on the advantageous N-polar surface and the p-layer grown on the inverted Ga-polar surface.

Hosalli, A. M.; Van Den Broeck, D. M.; Bedair, S. M. [Department of Electrical and Computer Engineering, NCSU, Raleigh, North Carolina 27695 (United States)] [Department of Electrical and Computer Engineering, NCSU, Raleigh, North Carolina 27695 (United States); Bharrat, D.; El-Masry, N. A. [Department of Material Science and Engineering, NCSU, Raleigh, North Carolina 27695 (United States)] [Department of Material Science and Engineering, NCSU, Raleigh, North Carolina 27695 (United States)

2013-12-02T23:59:59.000Z

207

Approximation of lateral distribution of atmospheric Cherenkov light at different observation levels for different primary particles. Applications for cosmic ray studies  

E-Print Network [OSTI]

This work summarizes the results presented at 29th International Cosmic Ray Conference in Pune India. Generally the aim of this work is to obtain the lateral distribution of the atmospheric Cherenkov light in extensive air showers produced by different primary particles in wide energy range and at several observation levels and to fit the obtained lateral distributions. Using one large detector and partially modified CORSIKA code version are obtained the lateral distributions of Cherenkov light flux densities at several observation levels for different particle primaries precisely at 536 g/cm2 Chacaltaya, 700 g/cm2 Moussala and 875 g/cm2 Kartalska field observation levels for hadronic primaries and gamma quanta in the energy range 1011 eV-1016 eV. On the basis of the solution of over-determined inverse problem the approximation of these distributions is obtained. The same model function for all the primaries is used and for the different observation levels. The different model parameters for the different primaries and levels are obtained. The approximations are compared with polynomial approximation obtained with different method. Both approximations are used for detector efficiency estimation for the different experiments in preparation and estimation of the accuracy of the reconstruction techniques. At the same time inclined showers up to 30 degrees zenith angle are studied at Chacaltaya observation level. The obtained lateral distributions of vertical showers are compared with vertical showers model and the previously obtained approximation. This permits to adjust the reconstruction strategy and to study the model parameters behavior.

Alexander Mishev; Strashimir Mavrodiev; Jordan Stamenov

2005-11-30T23:59:59.000Z

208

The X-ray Power Density Spectrum of the Seyfert 2 Galaxy NGC 4945: Analysis and Application of the Method of Light Curve Simulations  

SciTech Connect (OSTI)

The study of the power density spectrum (PDS) of fluctuations in the X-ray flux from active galactic nuclei (AGN) complements spectral studies in giving us a view into the processes operating in accreting compact objects. An important line of investigation is the comparison of the PDS from AGN with those from galactic black hole binaries; a related area of focus is the scaling relation between time scales for the variability and the black hole mass. The PDS of AGN is traditionally modeled using segments of power laws joined together at so-called break frequencies; associations of the break time scales, i.e., the inverses of the break frequencies, with time scales of physical processes thought to operate in these sources are then sought. I analyze the Method of Light Curve Simulations that is commonly used to characterize the PDS in AGN with a view to making the method as sensitive as possible to the shape of the PDS. I identify several weaknesses in the current implementation of the method and propose alternatives that can substitute for some of the key steps in the method. I focus on the complications introduced by uneven sampling in the light curve, the development of a fit statistic that is better matched to the distributions of power in the PDS, and the statistical evaluation of the fit between the observed data and the model for the PDS. Using archival data on one AGN, NGC 3516, I validate my changes against previously reported results. I also report new results on the PDS in NGC 4945, a Seyfert 2 galaxy with a well-determined black hole mass. This source provides an opportunity to investigate whether the PDS of Seyfert 1 and Seyfert 2 galaxies differ. It is also an attractive object for placement on the black hole mass-break time scale relation. Unfortunately, with the available data on NGC 4945, significant uncertainties on the break frequency in its PDS remain.

Mueller, Martin; /SLAC

2010-12-16T23:59:59.000Z

209

Description  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phasesData FilesShape, Density, and Morphologyusing TD-DFT. |

210

Position Description Report Run Date Aug 28 2013 2:46PM  

E-Print Network [OSTI]

of analysis, design, implementation, testing, and integration of applications supported by EAISPosition Description Report Run Date Aug 28 2013 2:46PM Position Number: TBD Dept: IET APPLICATION DEVELOPMENT - 061419 Position: APPLICATION DEVELOPER Approved Payroll Title Code: TBD Approved Payroll Title

California at Davis, University of

211

Web Tourist Route Description Tool   

E-Print Network [OSTI]

This paper presents an application built for the Gazetteer for Scotland (GfS). The application exploits the fact that the GfS has a large and reliable source of data for Scotland that can be distributed geographically. ...

Terzis, Panagiotis

2010-11-24T23:59:59.000Z

212

Bandgap tailoring of in-situ nitrogen-doped TiO{sub 2} sputtered films intended for electrophotocatalytic applications under solar light  

SciTech Connect (OSTI)

We report on a reactive RF-sputtering process permitting the in-situ nitrogen doping of TiO{sub 2} films in order to shift their photoactivity from UV to visible range. By carefully controlling the relative nitrogen-to-argon mass flow rate ratio (within the 0%–25% range) in the sputter deposition chamber, TiO{sub 2}:N films were grown with nitrogen contents ranging from 0 to 6.2 at. %, as determined by high-resolution X-ray spectroscopy measurements. A systematic investigation of the crystalline structure of the TiO{sub 2}:N films, as a function of their N content, revealed that low N contents (0.2–0.3 at. %) induce crystallization in the rutile phase while higher N contents (?1.4 at. %) were accompanied with the recovery of the anatase structure with an average crystallite size of ?35?nm. By using both UV-Vis absorption and spectroscopic ellipsometry measurements, we were able to quantitatively determine the bandgap (E{sub g}) variation of the TiO{sub 2}:N films as a function of their N content. Thus, we have demonstrated that the E{sub g} of the TiO{sub 2}:N films effectively narrows from 3.2?eV down to a value as low as ?2.3?eV for the optimal N doping concentration of 3.4 at. % (higher N incorporation does not translate into further red shifting of the TiO{sub 2}:N films' E{sub g}). The photoactivity of the TiO{sub 2}:N films under visible light was confirmed through electro-photocatalytic decomposition of chlortetracycline (CTC, an emerging water pollutant) under standard 1.5AM solar radiation. Thus, CTC degradation efficiencies of up to 98% were achieved with 2 hours process cycles under simulated solar light. Moreover, the electro-photocatalytic performance of the TiO{sub 2}:N films is shown to be directly correlated to their optoelectronic properties (namely their bandgap narrowing).

Delegan, N.; El Khakani, M. A., E-mail: elkhakani@emt.inrs.ca [Institut National de la Recherche Scientifique, Centre Énergie, Matériaux et Télécommunications, 1650, Boulevard Lionel-Boulet, Varennes, Québec J3X-1S2 (Canada); Daghrir, R.; Drogui, P. [Institut National de la Recherche Scientifique, Centre Eau, Terre et Environnement, 490 Rue de la Couronne, Québec G1K-9A9 (Canada)

2014-10-21T23:59:59.000Z

213

GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION.  

SciTech Connect (OSTI)

THE DEPARTMENT OF ENERGY ORDER 5400.1, GENERAL ENVIRONMENTAL PROTECTION PROGRAM, REQUIRES THE DEVELOPMENT AND IMPLEMENTATION OF A GROUNDWATER PROTECTION PROGRAM. THE BNL GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION PROVIDES AN OVERVIEW OF HOW THE LABORATORY ENSURES THAT PLANS FOR GROUNDWATER PROTECTION, MONITORING, AND RESTORATION ARE FULLY DEFINED, INTEGRATED, AND MANAGED IN A COST EFFECTIVE MANNER THAT IS CONSISTENT WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

PAQUETTE,D.E.; BENNETT,D.B.; DORSCH,W.R.; GOODE,G.A.; LEE,R.J.; KLAUS,K.; HOWE,R.F.; GEIGER,K.

2002-05-31T23:59:59.000Z

214

Mobile lighting apparatus  

DOE Patents [OSTI]

A mobile lighting apparatus includes a portable frame such as a moveable trailer or skid having a light tower thereon. The light tower is moveable from a stowed position to a deployed position. A hydrogen-powered fuel cell is located on the portable frame to provide electrical power to an array of the energy efficient lights located on the light tower.

Roe, George Michael; Klebanoff, Leonard Elliott; Rea, Gerald W; Drake, Robert A; Johnson, Terry A; Wingert, Steven John; Damberger, Thomas A; Skradski, Thomas J; Radley, Christopher James; Oros, James M; Schuttinger, Paul G; Grupp, David J; Prey, Stephen Carl

2013-05-14T23:59:59.000Z

215

Characterizing Ion Profiles in Dynamic Junction Light-Emitting...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

advantage in applications such as light-emitting devices, transistors, and electrochromic devices, among others. Evidence suggests that the profiles of ions and...

216

amyloidogenic light chain: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Page Topic Index 21 Side-chain functionalized luminescent polymers for organic light-emitting diode applications. Open Access Theses and Dissertations Summary: ??This thesis aims...

217

Detroit Public Lighting Department- Commercial and Industrial Energy Wise Program  

Broader source: Energy.gov [DOE]

The Detroit Public Lighting Department (PLD) offers commercial and industrial customers rebates for energy efficient equipment. Specific rebate amounts, equipment requirements, and applications are...

218

COLLOQUIUM: CASL: Consortium for Advanced Simulation of Light...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

light water reactors (LWRs). This environment, designated the Virtual Environment for Reactor Applications (VERA), incorporates science-based models, state-of-the-art numerical...

219

EK101 Engineering Light Smart Lighting  

E-Print Network [OSTI]

EK101 Engineering Light Smart Lighting Homework for 9/10 1. Make an estimate (using if the patent is granted.) 3. What is a lumen? A lux? How are the two related? How would you use a lux meter, (Lux, Lumens/m2) Luminous Flux: Perceivable light power from a source, (Lumens) Use the lux meter

Bifano, Thomas

220

ORIGINAL ARTICLE Approximate Truth and Descriptive Nesting  

E-Print Network [OSTI]

ORIGINAL ARTICLE Approximate Truth and Descriptive Nesting Jeffrey Alan Barrett Received: 7 July. This paper presents a notion of local probable approximate truth in terms of descriptive nesting relations

Barrett, Jeffrey A.

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Specific light in sculpture  

E-Print Network [OSTI]

Specific light is defined as light from artificial or altered natural sources. The use and manipulation of light in three dimensional sculptural work is discussed in an historic and contemporary context. The author's work ...

Powell, John William

1989-01-01T23:59:59.000Z

222

Trial Demonstration of Area Lighting Retrofit  

Broader source: Energy.gov [DOE]

LED Area Lighting Retrofit: Yuma Border Patrol Along the Yuma Sector Border Patrol Area in Yuma, Arizona, the GATEWAY program conducted a trial demonstration in which the incumbent quartz metal halide area lighting was replaced with LED at three pole locations. The LED system was found to equal or better the incumbent system in terms of both illuminance and uniformity, and an advanced optical system and lower pole height improved the illuminance uniformity, reduced stray light, and increased projected energy and maintenance cost savings. This high luminous flux and high temperature application is not unique and similar applications can benefit from the findings of this installation.

223

Nanoengineering for solid-state lighting.  

SciTech Connect (OSTI)

This report summarizes results from a 3-year Laboratory Directed Research and Development project performed in collaboration with researchers at Rensselaer Polytechnic Institute. Our collaborative effort was supported by Sandia's National Institute for Nanoengineering and focused on the study and application of nanoscience and nanoengineering concepts to improve the efficiency of semiconductor light-emitting diodes for solid-state lighting applications. The project explored LED efficiency advances with two primary thrusts: (1) the study of nanoscale InGaN materials properties, particularly nanoscale crystalline defects, and their impact on internal quantum efficiency, and (2) nanoscale engineering of dielectric and metal materials and integration with LED heterostructures for enhanced light extraction efficiency.

Schubert, E. Fred (Rensselaer Polytechnic Institute,Troy, NY); Koleske, Daniel David; Wetzel, Christian (Rensselaer Polytechnic Institute,Troy, NY); Lee, Stephen Roger; Missert, Nancy A.; Lin, Shawn-Yu (Rensselaer Polytechnic Institute,Troy, NY); Crawford, Mary Hagerott; Fischer, Arthur Joseph

2009-09-01T23:59:59.000Z

224

Senior Mechanical Engineer Company Description  

E-Print Network [OSTI]

programs, such as ProE Mechanism, when applicable. · Perform static, dynamic, vibration, thermal, and other Analysis) and/or other process tools when applicable. · Lead projects and work and coordinate work and in a team environment on a variety of products. If you feel you meet these requirements, please forward your

Kostic, Milivoje M.

225

Descriptive Model of Generic WAMS  

SciTech Connect (OSTI)

The Department of Energy’s (DOE) Transmission Reliability Program is supporting the research, deployment, and demonstration of various wide area measurement system (WAMS) technologies to enhance the reliability of the Nation’s electrical power grid. Pacific Northwest National Laboratory (PNNL) was tasked by the DOE National SCADA Test Bed Program to conduct a study of WAMS security. This report represents achievement of the milestone to develop a generic WAMS model description that will provide a basis for the security analysis planned in the next phase of this study.

Hauer, John F.; DeSteese, John G.

2007-06-01T23:59:59.000Z

226

Description of CBECS Building Types  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 633 622 56623 4623 42YearDelaware Natural2Description

227

Theoretical descriptions of compound-nuclear reactions: open problems & challenges  

E-Print Network [OSTI]

Compound-nuclear processes play an important role for nuclear physics applications and are crucial for our understanding of the nuclear many-body problem. Despite intensive interest in this area, some of the available theoretical developments have not yet been fully tested and implemented. We revisit the general theory of compound-nuclear reactions, discuss descriptions of pre-equilibrium reactions, and consider extensions that are needed in order to get cross section information from indirect measurements.

Brett V. Carlson; Jutta E. Escher; Mahir S. Hussein

2014-03-04T23:59:59.000Z

228

Monitored Geologic Repository Project Description Document  

SciTech Connect (OSTI)

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (CRWMS M&O 2000b) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) engineering design basis in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The engineering design basis documented in the PDD is to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the engineering design basis from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the engineering design basis captured in the SDDs and the design requirements captured in U.S. Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M&O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 2-1, the MGR Architecture (Section 4.1),the Engineering Design Bases (Section 5), and the Controlled Project Assumptions (Section 6).

P. Curry

2000-06-01T23:59:59.000Z

229

Monitored Geologic Repository Project Description Document  

SciTech Connect (OSTI)

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the Yucca Mountain Site Characterization Project Requirements Document (YMP RD) (YMP 2001a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M&O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).

P. Curry

2001-06-26T23:59:59.000Z

230

Monitored Geologic Repository Project Description Document  

SciTech Connect (OSTI)

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (YMP 2000a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).

P. M. Curry

2001-01-30T23:59:59.000Z

231

THE FABRICATION AND ANALYSIS OF QUANTUM-DOT THIN FILM LIGHT EMITTING DIODES FOR USE IN DISPLAYS TECHNOLOGIES.  

E-Print Network [OSTI]

??The quantum dot has many applications, one of which is the light emitting diode. Quantum dot light emitting diodes were fabricated for their use in… (more)

Pickering, Shawn

2011-01-01T23:59:59.000Z

232

Integrated Project Management System description  

SciTech Connect (OSTI)

The Integrated Program Management System (IPMS) Description is a ``working`` document that describes the work processes of the Uranium Mill Tailings Remedial Action Project Office (UMTRA) and IPMS Group. This document has undergone many revisions since the UMTRA Project began; this revision not only updates the work processes but more clearly explains the relationships between the Project Office, contractors, and other participants. The work process flow style has been revised to better describe Project work and the relationships of participants. For each work process, more background and guidance on ``why`` and ``what is expected`` is given. For example, a description of activity data sheets has been added in the work organization and the Project performance and reporting processes, as well as additional detail about the federal budget process and funding management and improved flow charts and explanations of cost and schedule management. A chapter has been added describing the Cost Reduction/Productivity Improvement Program. The Change Control Board (CCB) procedures (Appendix A) have been updated. Project critical issues meeting (PCIM) procedures have been added as Appendix B. Budget risk assessment meeting procedures have been added as Appendix C. These appendices are written to act as stand-alone documentation for each process. As the procedures are improved and updated, the documentation can be updated separately.

NONE

1994-09-01T23:59:59.000Z

233

Advanced Lighting Program Development (BG9702800) Final Report  

SciTech Connect (OSTI)

The report presents a long-range plan for a broad-based, coordinated research, development and market transformation program for reducing the lighting energy intensities in commercial and residential buildings in California without compromising lighting quality. An effective program to advance lighting energy efficiency in California must be based on an understanding that lighting is a mature field and the lighting industry has developed many specialized products that meet a wide variety of light needs for different building types. Above all else, the lighting field is diverse and there are applications for a wide range of lighting products, systems, and strategies. Given the range of existing lighting solutions, an effective energy efficient lighting research portfolio must be broad-based and diverse to match the diversity of the lighting market itself. The belief that there is one solution--a magic bullet, such as a better lamp, for example--that will propel lighting efficiency across all uses to new heights is, in the authors' opinion, an illusion. A multi-path program is the only effective means to raising lighting efficiency across all lighting applications in all building types. This report presents a list of 27 lighting technologies and concepts (key activities) that could form the basis of a coordinated research and market transformation plan for significantly reducing lighting energy intensities in California buildings. The total 27 key activities into seven broad classes as follows: Light sources; Ballasts; Luminaires; Lighting Controls; Lighting Systems in Buildings; Human Factors and Education. Each of the above technology classes is discussed in terms of background, key activities, and the energy savings potential for the state. The report concludes that there are many possibilities for targeted research, development, and market transformation activities across all sectors of the building lighting industry. A concerted investment by the state to foster efficiency improvements in lighting systems in commercial and residential buildings would have a major positive impact on energy use and environmental quality in California.

Rubinstein, Francis; Johnson, Steve

1998-02-01T23:59:59.000Z

234

Solid-state lighting technology perspective.  

SciTech Connect (OSTI)

Solid-State Lighting (SSL) uses inorganic light-emitting diodes (LEDs) and organic light-emitting diodes (OLEDs) to convert electricity into light for illumination. SSL has the potential for enormous energy savings and accompanying environmental benefits if its promise of 50% (or greater) energy efficiencies can be achieved. This report provides a broad summary of the technologies that underlie SSL. The applications for SSL and potential impact on U.S. and world-wide energy consumption, and impact on the human visual experience are discussed. The properties of visible light and different technical metrics to characterize its properties are summarized. The many factors contributing to the capital and operating costs for SSL and traditional lighting sources (incandescent, fluorescent, and high-intensity discharge lamps) are discussed, with extrapolations for future SSL goals. The technologies underlying LEDs and OLEDs are also described, including current and possible alternative future technologies and some of the present limitations.

Tsao, Jeffrey Yeenien; Coltrin, Michael Elliott

2006-08-01T23:59:59.000Z

235

Many exterior entry and walkway lights in residential and commercial  

E-Print Network [OSTI]

Many exterior entry and walkway lights in residential and commercial applications use incandescent combines cutting-edge LED technology with an occupancy sensor and incandescent lighting to reduce operating costs below those of incandescent lamps and CFL fixtures. The low wattage LED light turns on at dusk

236

Fuel Economy of Vehicles Made in 2004 Description of the sample  

E-Print Network [OSTI]

Fuel Economy of Vehicles Made in 2004 Description of the sample: A random sample of 36 cars and light trucks was obtained from all the vehicle models made in 2004. The combined fuel economy estimate the vehicles got 22 MPG or less. There was a good deal of variability in the fuel economy of the 36 cars

Carriquiry, Alicia

237

Description The SPCM-AQR is a self-contained module  

E-Print Network [OSTI]

that exceeds 35% at 630 nm. The photodiode is both thermoelectrically cooled and temperature controlledDescription The SPCM-AQR is a self-contained module which detects single photons of light over, ensuring stabilized performance despite changes in the ambient temperature. The SPCM-AQR module utilizes

Saffman, Mark

238

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

support for MTRI programs focused on the application of programming and geospatial analysis to solving governmental and societal needs through sponsored research. The ability to connect geospatial models research projects. Understand geospatial and remote sensing concepts that enable appropriate integration

239

EXAMINATION OF THE FEASIBILITY FOR DEMONSTRATION AND USE OF RADIOLUMINESCENT LIGHTS FOR ALASKAN REMOTE RUNWAY LIGHTING  

SciTech Connect (OSTI)

This report examines the feasibility of radioluminescent light applications for rural Alaskan airports. The work presented in this report covers four tasks: State of the Art Evaluation of Radioluminescent Lights, Environmental, Radiological, and Regulatory Evaluations, Engineering Evaluations, and Demonstration Plan Development.

Jensen, G.; Perrigo, L.; Leonard, L.; Hegdal, L

1984-01-01T23:59:59.000Z

240

Lighting and Daylight Harvesting  

E-Print Network [OSTI]

exposing us to the latest products and technologies. Daylight Harvesting A system of controlling the direction and the quantity of light both natural and artificial within a given space. This implies: Control of fenestration in terms of size..., transmission and direction. Control of reflected light within a space. Control of electric light in terms of delivery and amount Daylight harvesting systems are typically designed to maintain a minimum recommended light level. This light level...

Bos, J.

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Light scattering with oxide nanocrystallite aggregates for dye-  

E-Print Network [OSTI]

Light scattering with oxide nanocrystallite aggregates for dye- sensitized solar cell application 4://spiedl.org/terms #12;Light scattering with oxide nanocrystallite aggregates for dye-sensitized solar cell application used for a photoelectrode in a dye-sensitized solar cell, the aggregates can be designed to generate

Cao, Guozhong

242

Position Description Report Run Date Aug 28 2013 10:03AM  

E-Print Network [OSTI]

developer in all phases of analysis, design, implementation, testing, and integration of cloud applicationsPosition Description Report Run Date Aug 28 2013 10:03AM Position Number: 02015821 Dept: IET APPLICATION DEVELOPMENT - 061419 Position: SENIOR CLOUD INTEGRATION LEAD Approved Payroll Title Code: 7289

California at Davis, University of

243

Demand Responsive Lighting: A Scoping Study  

SciTech Connect (OSTI)

The objective of this scoping study is: (1) to identify current market drivers and technology trends that can improve the demand responsiveness of commercial building lighting systems and (2) to quantify the energy, demand and environmental benefits of implementing lighting demand response and energy-saving controls strategies Statewide. Lighting systems in California commercial buildings consume 30 GWh. Lighting systems in commercial buildings often waste energy and unnecessarily stress the electrical grid because lighting controls, especially dimming, are not widely used. But dimmable lighting equipment, especially the dimming ballast, costs more than non-dimming lighting and is expensive to retrofit into existing buildings because of the cost of adding control wiring. Advances in lighting industry capabilities coupled with the pervasiveness of the Internet and wireless technologies have led to new opportunities to realize significant energy saving and reliable demand reduction using intelligent lighting controls. Manufacturers are starting to produce electronic equipment--lighting-application specific controllers (LAS controllers)--that are wirelessly accessible and can control dimmable or multilevel lighting systems obeying different industry-accepted protocols. Some companies make controllers that are inexpensive to install in existing buildings and allow the power consumed by bi-level lighting circuits to be selectively reduced during demand response curtailments. By intelligently limiting the demand from bi-level lighting in California commercial buildings, the utilities would now have an enormous 1 GW demand shed capability at hand. By adding occupancy and light sensors to the remotely controllable lighting circuits, automatic controls could harvest an additional 1 BkWh/yr savings above and beyond the savings that have already been achieved. The lighting industry's adoption of DALI as the principal wired digital control protocol for dimming ballasts and increased awareness of the need to standardize on emerging wireless technologies are evidence of this transformation. In addition to increased standardization of digital control protocols controller capabilities, the lighting industry has improved the performance of dimming lighting systems over the last two years. The system efficacy of today's current dimming ballasts is approaching that of non-dimming program start ballasts. The study finds that the benefits of applying digital controls technologies to California's unique commercial buildings market are enormous. If California were to embark on an concerted 20 year program to improve the demand responsiveness and energy efficiency of commercial building lighting systems, the State could avoid adding generation capacity, improve the elasticity of the grid, save Californians billion of dollars in avoided energy charges and significantly reduce greenhouse gas emissions.

Rubinstein, Francis; Kiliccote, Sila

2007-01-03T23:59:59.000Z

244

Light-front chiral effective field theory  

SciTech Connect (OSTI)

We propose a general framework to calculate the nonperturbative structure of relativistic bound state systems. The state vector of the bound state is calculated in the covariant formulation of light-front dynamics. In this scheme, the state vector is defined on the light front of general position {omega} {center_dot} x = 0, where {omega} is an arbitrary light-like four-vector. This enables a strict control of any violation of rotational invariance. The state vector is then decomposed in Fock components. Our formalism is applied to the description of the nucleon properties at low energy, in chiral perturbation theory. We also show that the use of a recently proposed regularization scheme, the so-called Taylor-Lagrange regularization scheme, is very adequate in order to treat divergences in this nonperturbative framework.

Mathiot, J.-F. [Laboratoire de Physique Corpusculaire (France)] [Laboratoire de Physique Corpusculaire (France); Tsirova, N. A., E-mail: ntsirova@ssu.samara.ru [Samara State University (Russian Federation)

2013-11-15T23:59:59.000Z

245

Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER  

E-Print Network [OSTI]

Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER Subject Description Monday AND INSURANCE 242 ACTUARIAL SCIENCE 243 TRANSPORTATION AND PUBLIC UTILITIES 244 CLASSICS 250 COMMUNICATION ARTS Reporting #12;Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER Subject Description Monday

Wisconsin at Madison, University of

246

Light front Casimir effect at finite temperature  

E-Print Network [OSTI]

The correct description of the standard Casimir effect for periodic boundary conditions via light front formalism implies in these conditions imposed at fixed Minkowski times [Almeida {\\it et al.} Phys. Rev. {\\bf D 87}, 065028 (2013); Chabysheva and Hiller, Phys. Rev. {\\bf D 88}, 085006 (2013)] instead of fixed light front times. The unphysical nature of this latter condition is manifested in the vacuum part by no regularization yielding a finite Casimir energy density [Lenz and Steinbacher, Phys. Rev. {\\bf D 67}, 045010 (2003)]. In the present paper, we extend this discussion and analyze the problem of the light front quantization with simultaneous presence of a thermal bath and boundary conditions. Considering both the oblique light front as well as Dirac light front coordinates, we show that the imposition of periodic boundary conditions at fixed Minkowski times recovers the expected behaviors for the energy density and Casimir entropy. We also investigate how the unphysical nature of the periodic boundary conditions imposed at fixed light front times manifests in the thermal part of the energy and entropy, showing that in the classical limit the Casimir entropy decreases linearly with the temperature (not becoming independent of the temperature as expected), and also that the Kirchhoff theorem is not respected.

P. L. M. Rodrigues; Silvana Perez; Danilo T. Alves; Van Sérgio Alves; Charles R. Silva

2015-01-06T23:59:59.000Z

247

Metallic halide lights and lighting systems. (Latest citations from the US Patent Bibliographic file with exemplary claims). Published Search  

SciTech Connect (OSTI)

The bibliography contains citations of selected patents concerning the design and operation of metallic halide lights and lighting systems. High pressure, high intensity, and low wattage discharge lamps are described. Citations discuss power sources, lamp life, lamp control circuits, thermal switches, and heat reflective coatings. Applications in sport stadium lighting, vehicle headlights, and crop-lighting are included. (Contains a minimum of 170 citations and includes a subject term index and title list.)

Not Available

1994-11-01T23:59:59.000Z

248

Machinist Pipeline/Apprentice Program Program Description  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Machinist PipelineApprentice Program Program Description The Machinist Pipeline Program was created by the Prototype Fabrication Division to fill a critical need for skilled...

249

Electricity Delivery and Energy Reliability PROGRAM DESCRIPTION  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

32 Electricity Delivery and Energy Reliability PROGRAM DESCRIPTION The Office of Electricity Delivery and Energy Reliability (OE) leads national efforts to modernize the electric...

250

Phenomenological description of bidirectional surface reflection  

E-Print Network [OSTI]

Phenomenological description of bidirectional surface reflection Jan J. Koenderink and Andrea J satellites). In some cases one has (usually approximate, phenomenological) models, but in most cases one

O'Brien, James F.

251

Home energy rating systems: Program descriptions  

SciTech Connect (OSTI)

This report contains the descriptions of home energy rating and labelling programs (HERS) that were surveyed in January 1986 as part of a national evaluation of HERS.

Vine, E.; Barnes, B.K.; Ritschard, R.

1987-02-01T23:59:59.000Z

252

Assistant Director, Prospect Management Description  

E-Print Network [OSTI]

and to the Prospect Management Data Wranglers to assist their efforts in improving the quality of Prospect Management Management · Enter and monitor prospect assignments and new prospect records requests. · Monitor data quality of all functions and systems related to prospect management, including software applications, industry

Portman, Douglas

253

Kyler Nelson Light Timer  

E-Print Network [OSTI]

designated by the user, the Arduino board will dim the light to save energy. The user designates the time instance, the light is dimmed using pulse width modulation (PWM) in the Arduino's pin number 11

Kachroo, Pushkin

254

Why is there lighting in Title 24? 1. Brief history  

E-Print Network [OSTI]

OTHER CRITICAL LEGISLATION LEGISLATION DESCRIPTION Global Warming Solutions Act (AB 32, 2006) Reduce greenhouse gas emissions to 1990 levels by 2020. Huffman Bill (AB 1109, 2007) Reduce lighting energy consumption by more than 50% from 2007 residential levels and 25% from 2007 commercial levels by 2018

California at Davis, University of

255

The Joy of Description Logics  

E-Print Network [OSTI]

· Algorithms for subsumption · Example applications to IR/NLP and Semantic Web · Frontiers for research #12-of has.Spot #12;Motivations and History LDWDS Dog Large has.(Spot Dark) LDWDS(x) (Dog(x) ^ Large(x)) ^ (y.has(x,y) ^ (Spot(y) ^ Dark(y)) Large Dog with a Dark Spot (LDWDS) DWS Dog has.Spot DWS(x) Dog

Sanner, Scott

256

AIRPORT LIGHTING Session Highlights  

E-Print Network [OSTI]

AIRPORT LIGHTING Session Highlights In May 2002, the Airport Technical Assistance Program, also known as AirTAP, sponsored three airport-lighting training sessions at different locations in Minnesota information on airport lighting and navigational aid equipment selection, funding, maintenance, and operation

Minnesota, University of

257

Advanced Demand Responsive Lighting  

E-Print Network [OSTI]

Advanced Demand Responsive Lighting Host: Francis Rubinstein Demand Response Research Center demand responsive lighting systems ­ Importance of dimming ­ New wireless controls technologies · Advanced Demand Responsive Lighting (commenced March 2007) #12;Objectives · Provide up-to-date information

258

Light emitting device comprising phosphorescent materials for white light generation  

DOE Patents [OSTI]

The present invention relates to phosphors for energy downconversion of high energy light to generate a broadband light spectrum, which emit light of different emission wavelengths.

Thompson, Mark E.; Dapkus, P. Daniel

2014-07-22T23:59:59.000Z

259

Light Duty Combustion Research: Advanced Light-Duty Combustion...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combustion Research: Advanced Light-Duty Combustion Experiments Light Duty Combustion Research: Advanced Light-Duty Combustion Experiments 2009 DOE Hydrogen Program and Vehicle...

260

Description and application of the AERIN Code at LLNL  

SciTech Connect (OSTI)

The AERIN code was written at the Lawrence Livermore National Laboratory in 1976 to compute the organ burdens and absorbed dose resulting from a chronic or acute inhalation of transuranic isotopes. The code was revised in 1982 to reflect the concepts of ICRP-30. This paper will describe the AERIN code and how it has been used at LLNL to study more than 80 cases of internal deposition and obtain estimates of internal dose. A comparison with the computed values of the committed organ dose is made with ICRP-30 values. The benefits of using the code are described. 3 refs., 3 figs., 6 tabs.

King, W.C.

1986-01-02T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Applicable EPA Regulations and Description Website | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300Algoil JumpAltergyExperimentsInformationAnuvuCommission |Information

262

WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED,  

E-Print Network [OSTI]

Fuel oil and Turkey Based Biofuel Energy Rocovery 12,000 Industrial Waste $30,000 $500 $29,500 1500WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED, REUSED, RECYCLED OR CONSERVED IN 2006 WASTE TYPE DESCRIPTION DETAILS * Aerosol Can Disposal System Recycling 528 66 pounds of hazardous waste per unit $7

263

DESCRIPTIVE TEXT SEA WATER INORGANIC CARBON DATABASE  

E-Print Network [OSTI]

DESCRIPTIVE TEXT SEA WATER INORGANIC CARBON DATABASE for the CARBON DIOXIDE INFORMATION OF OCEANOGRAPHY (SIO) I. GENERAL DESCRIPTION The database consists of tables presenting oceanic inorganic carbon, titration (total) alkalinity (database abbreviation: "ALK"), and the 13 C / 12 C isotopic ratio

264

STUDENT LABOR POSITION DESCRIPTION Forestry Department  

E-Print Network [OSTI]

approved STUDENT LABOR POSITION DESCRIPTION Forestry Department Most Recently Updated 10/17/00 Position Title: Student Forestry Aid Must work 10 hrs/wk. I. Grade Level: 1­3 (includes full-time, summer and other holiday labor positions) II. Description: A. The following are the essential duties for a Forestry

Baltisberger, Jay H.

265

Internship Description Title: Stellar Solutions Engineering Internship  

E-Print Network [OSTI]

Internship Description Title: Stellar Solutions ­ Engineering Internship Job Description: The internship will be held at the Stellar National Reconnaissance Office in Washington, DC. Tasks will require a background in intelligence, and familiar with all-source analysis. This internship is flexible throughout

Virginia Tech

266

CHAPTER 5. PLASMA DESCRIPTIONS I: KINETIC, TWO-FLUID 1 Plasma Descriptions I  

E-Print Network [OSTI]

CHAPTER 5. PLASMA DESCRIPTIONS I: KINETIC, TWO-FLUID 1 Chapter 5 Plasma Descriptions I: Kinetic, Two-Fluid Descriptions of plasmas are obtained from extensions of the kinetic theory of gases of charged particles in the plasma, and because the electric and magnetic fields in the plasma must

Callen, James D.

267

WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED,  

E-Print Network [OSTI]

to the manufacturer . Replaced with energy efficient light emitting diode (LED) signs. Project reduced risk of tritium

268

CASK/MSC/WP PREPARATION SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this system description document (SDD) is to establish requirements that drive the design of the Cask/MSC/WP preparation system and their bases to allow the design effort to proceed to license application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design, as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience and users are design engineers. This type of SDD both leads and trails the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. This SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. This SDD addresses the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]) requirements. Additional PRD requirements may be cited, as applicable, to drive the design of specific aspects of the system, with justifications provided in the basis. Functional and operational requirements applicable to this system are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]) document. Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (BSC 2004 [DIRS 171599]) and the preclosure safety analyses.

S. Drummond

2005-04-12T23:59:59.000Z

269

SMART LIGHTING SYSTEMS ULTIMATE LIGHTING The Smart Lighting  

E-Print Network [OSTI]

Integration (Holistic Integrated Design) · Sensors as important as LEDs · Interconnected systems (human, building, grid) · Artistic Design Freedom · Lighting is Health, Entertainment, Information and Illumination Cost at any brightness · Chip level integrated electronics THE ERC RESEARCH COVERS THE ENTIRE SUPPLY

Linhardt, Robert J.

270

Indoor Lighting Overview Page 5-1 2008 Nonresidential Compliance Manual August 2009  

E-Print Network [OSTI]

Compliance Manual August 2009 5.1 Overview The primary mechanism for regulating indoor lighting energy under building's energy consumption, including lighting power, meets the energy budget. The performance approach lighting applications. Indoor lighting is one of the single largest consumers of energy (kilowatt

271

New Light Sources for Tomorrow's Lighting Designs  

E-Print Network [OSTI]

, pioneered for headlam~for the automotive industry, has led to the development of halo en capsule lamps for general lighting. The original90-watt family PAR 38 lamps using tungsten halogen capsules produces the sa amount of useful light in the beam as a I... quartz PAR lamps with similar benefi . Each of these tungsten halogen capsule PAR wattages are av ilable in narrow spot, spot, and flood beam patterns. The most recent developments in the PAR halogen psule family include two entirely new lamp designs...

Krailo, D. A.

272

National Synchrotron Light Source  

ScienceCinema (OSTI)

A tour of Brookhaven's National Synchrotron Light Source (NSLS), hosted by Associate Laboratory Director for Light Sources, Stephen Dierker. The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviolet, and x-ray light for basic and applied research in physics, chemistry, medicine, geophysics, environmental, and materials sciences.

BNL

2009-09-01T23:59:59.000Z

273

LED Lighting Retrofit  

E-Print Network [OSTI]

? Municipal Street Lighting Consortium ? American Public Power Association (APPA) ? Demonstration in Energy Efficiency Development (DEED) ? Source of funding and database of completed LED roadway projects 6 Rules of the Road ESL-KT-11-11-57 CATEE 2011..., 2011 ? 9 Solar-Assisted LED Case Study LaQuinta Hotel, Cedar Park, Texas ? Utilizes 18 - ActiveLED Solar-Assisted Parking Lot Lights ? Utilizes ?power management? to extend battery life while handling light output ? Reduces load which reduces PV...

Shaw-Meadow, N.

2011-01-01T23:59:59.000Z

274

High efficiency incandescent lighting  

DOE Patents [OSTI]

Incandescent lighting structure. The structure includes a thermal emitter that can, but does not have to, include a first photonic crystal on its surface to tailor thermal emission coupled to, in a high-view-factor geometry, a second photonic filter selected to reflect infrared radiation back to the emitter while passing visible light. This structure is highly efficient as compared to standard incandescent light bulbs.

Bermel, Peter; Ilic, Ognjen; Chan, Walker R.; Musabeyoglu, Ahmet; Cukierman, Aviv Ruben; Harradon, Michael Robert; Celanovic, Ivan; Soljacic, Marin

2014-09-02T23:59:59.000Z

275

National Forest Inventory Description of attributes  

E-Print Network [OSTI]

National Forest Inventory Description of attributes Woodland_S: Woodland source (a) NFI base map have been mapped in accordance with the NFI mapping rules. National Forest Inventory #12;(f) 2010 AP

276

Creation of Computer Animation from Story Descriptions  

E-Print Network [OSTI]

This report describes a computer system that creates simple computer animation in response to high-level, vague, and incomplete descriptions of films. It makes its films by collecting and evaluating suggestions from ...

Kahn, Kenneth Michael

1979-08-01T23:59:59.000Z

277

COURSE TITLES COURSE DESCRIPTIONS Organizational Behavior &  

E-Print Network [OSTI]

COURSE TITLES COURSE DESCRIPTIONS MGT 5371 Organizational Behavior & Organizational Design Examines management of individual, interpersonal, group and intergroup relations, organizational design and experiential learning to accelerate their development as authentic leaders. MGT 5373 Opportunity Creation

Rock, Chris

278

Building English Explanations from Function Descriptions  

E-Print Network [OSTI]

An explanatory component is an important ingredient in any complex AI system. A simple generative scheme to build descriptive phrases from Lisp function calls can produce respectable explanations if explanation generators ...

Roberts, Bruce

279

Total Light Management  

Broader source: Energy.gov [DOE]

Presentation covers total light management, and is given at the Spring 2010 Federal Utility Partnership Working Group (FUPWG) meeting in Providence, Rhode Island.

280

Lighting Technology Panel  

Broader source: Energy.gov [DOE]

Presentation covers the Lighting Technology Panel for the Federal Utility Partnership Working Group (FUPWG) meeting, held on November 18-19, 2009. 

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Comparing Light Bulbs  

Broader source: Energy.gov [DOE]

In this exercise, students will use a light to demonstrate the difference between being energy-efficient and energy-wasteful, and learn what energy efficiency means.

282

Solid-State Lighting  

Broader source: Energy.gov (indexed) [DOE]

research and design. Quality LED luminaires require program designed to successfully move solid-state lighting precise design of several components -LED arrays, electronic into the...

283

Don de MR H. BREUIL DESCRIPTION  

E-Print Network [OSTI]

Don de MR H. BREUIL DESCRIPTION D UN SQUELETTE HUMAIN PHEHISTOHIOUE U ['COU Y BUT A ANTHY, près de O R R A Z ET Cio ITUT 3GIE 1U05 · . · r.6o. #12;DESCRIPTION · r SQUELETTE HUMAIN PR�HISTORIQUE à l'époque litcuslre. Voilà 1rs quelques renseignements qu'on m'a communiqués à ce sujet : En

Boyer, Edmond

284

Making More Light with Less Energy  

SciTech Connect (OSTI)

Representing the Center for Energy Efficient Materials (CEEM), this document is one of the entries in the Ten Hundred and One Word Challenge. As part of the challenge, the 46 Energy Frontier Research Centers were invited to represent their science in images, cartoons, photos, words and original paintings, but any descriptions or words could only use the 1000 most commonly used words in the English language, with the addition of one word important to each of the EFRCs and the mission of DOE: energy. The mission of the CEEM is to discover and develop materials that control the interactions among light, electricity, and heat at the nanoscale for improved solar energy conversion, solid-state lighting, and conversion of heat into electricity.

Kuritzky, Leah; Jewell, Jason

2013-07-18T23:59:59.000Z

285

NRC Construction Light Source Flicker: What We  

E-Print Network [OSTI]

NRC Construction Light Source Flicker: What We Need to Know, and Why You Should Care NRC Construction Jennifer A. Veitch, Ph.D. (c) 2013, National Research Council Canada #12;NRC Construction Handbook: Reference & Application (9th Ed.), 2000, p. 3-20 #12;NRC Construction Flicker Effects 1

California at Davis, University of

286

Entangled Light Emission From a Diode  

SciTech Connect (OSTI)

Electrically-driven entangled photon generation is demonstrated for the first time using a single semiconductor quantum dot embedded in a light emitting diode structure. The entanglement fidelity is shown to be of sufficient quality for applications such as quantum key distribution.

Stevenson, R. M.; Shields, A. J. [Toshiba Research Europe Limited, 208 Cambridge Science Park, Cambridge CB4 0GZ (United Kingdom); Salter, C. L. [Toshiba Research Europe Limited, 208 Cambridge Science Park, Cambridge CB4 0GZ (United Kingdom); Cavendish Laboratory, University of Cambridge, JJ Thomson Avenue, Cambridge CB3 0HE (United Kingdom); Farrer, I.; Nicoll, C. A.; Ritchie, D. A. [Cavendish Laboratory, University of Cambridge, JJ Thomson Avenue, Cambridge CB3 0HE (United Kingdom)

2011-12-23T23:59:59.000Z

287

Multiwaveguide implantable probe for light delivery to sets of distributed brain targets  

E-Print Network [OSTI]

Optical fibers are commonly inserted into living tissues such as the brain in order to deliver light to deep targets for neuroscientific and neuroengineering applications such as optogenetics, in which light is used to ...

Zorzos, Anthony Nicholas

288

Energy Savings Potential of Solid-State Lighting in General Illuminati...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

of Solid-State Lighting in General Illumination Applications - Report A U.S. DOE SSL report on Energy Savings Potential of Solid-State Lighting in General Illumination...

289

Energy Savings Potential of Solid-State Lighting in General Illuminati...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

of Solid-State Lighting in General Illumination Applications - Factsheet A U.S. DOE SSL fact sheet on Energy Savings Potential of Solid-State Lighting in General Illumination...

290

Light extraction in individual GaN nanowires on Si for LEDs  

E-Print Network [OSTI]

GaN-based nanowires hold great promise for solid state lighting applications because of their waveguiding properties and the ability to grow nonpolar GaN nanowire-based heterostructures, which could lead to increased light ...

Zhou, Xiang

291

Fabrication and optimization of light emitting devices with core-shell quantum dots  

E-Print Network [OSTI]

Quantum dot light emitting devices (QD-LEDs) are promising options for the next generation of solid state lighting, color displays, and other optoelectronic applications. Overcoating quantum dots (QDs) -- semiconducting ...

Song, Katherine Wei

2013-01-01T23:59:59.000Z

292

Materials for solid state lighting  

SciTech Connect (OSTI)

Dramatic improvement in the efficiency of inorganic and organic light emitting diodes (LEDs and OLEDs) within the last decade has made these devices viable future energy efficient replacements for current light sources. However, both technologies must overcome major technical barriers, requiring significant advances in material science, before this goal can be achieved. Attention will be given to each technology associated with the following major areas of material research: (1) material synthesis, (2) process development, (3) device and defect physics, and (4) packaging. The discussion on material synthesis will emphasize the need for further development of component materials, including substrates and electrodes, necessary for improving device performance. The process technology associated with the LEDs and OLEDs is very different, but in both cases it is one factor limiting device performance. Improvements in process control and methodology are expected to lead to additional benefits of higher yield, greater reliability and lower costs. Since reliability and performance are critical to these devices, an understanding of the basic physics of the devices and device failure mechanisms is necessary to effectively improve the product. The discussion will highlight some of the more basic material science problems remaining to be solved. In addition, consideration will be given to packaging technology and the need for the development of novel materials and geometries to increase the efficiencies and reliability of the devices. The discussion will emphasize the performance criteria necessary to meet lighting applications, in order to illustrate the gap between current status and market expectations for future product.

Johnson, S.G.; Simmons, J.A.

2002-03-26T23:59:59.000Z

293

Broadband light-emitting diode  

DOE Patents [OSTI]

A broadband light-emitting diode. The broadband light-emitting diode (LED) comprises a plurality of III-V compound semiconductor layers grown on a semiconductor substrate, with the semiconductor layers including a pair of cladding layers sandwiched about a strained-quantum-well active region having a plurality of different energy bandgaps for generating light in a wavelength range of about 1.3-2 .mu.m. In one embodiment of the present invention, the active region may comprise a first-grown quantum-well layer and a last-grown quantum-well layer that are oppositely strained; whereas in another embodiment of the invention, the active region is formed from a short-period superlattice structure (i.e. a pseudo alloy) comprising alternating thin layers of InGaAs and InGaAlAs. The use a short-period superlattice structure for the active region allows different layers within the active region to be simply and accurately grown by repetitively opening and closing one or more shutters in an MBE growth apparatus to repetitively switch between different growth states therein. The broadband LED may be formed as either a surface-emitting LED or as an edge-emitting LED for use in applications such as chemical sensing, fiber optic gyroscopes, wavelength-division-multiplexed (WDM) fiber-optic data links, and WDM fiber-optic sensor networks for automobiles and aircraft.

Fritz, Ian J. (Albuquerque, NM); Klem, John F. (Sandia Park, NM); Hafich, Michael J. (Albuquerque, NM)

1998-01-01T23:59:59.000Z

294

Broadband light-emitting diode  

DOE Patents [OSTI]

A broadband light-emitting diode is disclosed. The broadband light-emitting diode (LED) comprises a plurality of III-V compound semiconductor layers grown on a semiconductor substrate, with the semiconductor layers including a pair of cladding layers sandwiched about a strained-quantum-well active region having a plurality of different energy bandgaps for generating light in a wavelength range of about 1.3--2 {micro}m. In one embodiment of the present invention, the active region may comprise a first-grown quantum-well layer and a last-grown quantum-well layer that are oppositely strained; whereas in another embodiment of the invention, the active region is formed from a short-period superlattice structure (i.e. a pseudo alloy) comprising alternating thin layers of InGaAs and InGaAlAs. The use a short-period superlattice structure for the active region allows different layers within the active region to be simply and accurately grown by repetitively opening and closing one or more shutters in an MBE growth apparatus to repetitively switch between different growth states therein. The broadband LED may be formed as either a surface-emitting LED or as an edge-emitting LED for use in applications such as chemical sensing, fiber optic gyroscopes, wavelength-divisionmultiplexed (WDM) fiber-optic data links, and WDM fiber-optic sensor networks for automobiles and aircraft. 10 figs.

Fritz, I.J.; Klem, J.F.; Hafich, M.J.

1998-07-14T23:59:59.000Z

295

OpenGL Lighting 13. OpenGL Lighting  

E-Print Network [OSTI]

OpenGL Lighting 13. OpenGL Lighting · Overview of Lighting in OpenGL In order for lighting to have an effect in OpenGL, two things are required: A light An object to be lit Lights can be set to any color determine how they reflect the light which hits them. The color(s) of an object is determined

McDowell, Perry

296

Demonstration Assessment of Light-Emitting Diode (LED) Street Lighting Host Site: Lija Loop, Portland, Oregon  

SciTech Connect (OSTI)

This report describes the process and results of a demonstration of solid-state lighting (SSL) technology in a residential street lighting application, under the U.S. Department of Energy GATEWAY Solid-State Lighting Technology Demonstration Program. In this project, eight 100W (nominal) high-pressure sodium cobra head fixtures were replaced with a like number of LED street light luminaires manufactured by Leotek, Inc. The Leotek product achieved an estimated payback in the Lija Loop installation of about 20 years for replacement scenarios and a much shorter 7.6 years for new installations. Much of the associated energy savings (55%) supporting these payback periods, however, were achieved by reducing average horizontal photopic illuminance a similar amount (53%). Examined from a different perspective, the measured performance suggests that the Leotek product is at approximate parity with the HPS cobra head in terms of average delivered photopic illumination for a given power consumption. HPS comprises the second most efficacious street lighting technology available, exceeded only by low pressure sodium (LPS). LPS technology is not considered suitable for most street lighting applications due to its monochromatic spectral output and poor color rendering ability; therefore, this LED product is performing at an efficiency level comparable to its primary competition in this application.

Kinzey, Bruce R.; Myer, Michael

2009-11-01T23:59:59.000Z

297

Light intensity compressor  

DOE Patents [OSTI]

In a system for recording images having vastly differing light intensities over the face of the image, a light intensity compressor is provided that utilizes the properties of twisted nematic liquid crystals to compress the image intensity. A photoconductor or photodiode material that is responsive to the wavelength of radiation being recorded is placed adjacent a layer of twisted nematic liquid crystal material. An electric potential applied to a pair of electrodes that are disposed outside of the liquid crystal/photoconductor arrangement to provide an electric field in the vicinity of the liquid crystal material. The electrodes are substantially transparent to the form of radiation being recorded. A pair of crossed polarizers are provided on opposite sides of the liquid crystal. The front polarizer linearly polarizes the light, while the back polarizer cooperates with the front polarizer and the liquid crystal material to compress the intensity of a viewed scene. Light incident upon the intensity compressor activates the photoconductor in proportion to the intensity of the light, thereby varying the field applied to the liquid crystal. The increased field causes the liquid crystal to have less of a twisting effect on the incident linearly polarized light, which will cause an increased percentage of the light to be absorbed by the back polarizer. The intensity of an image may be compressed by forming an image on the light intensity compressor.

Rushford, Michael C. (Livermore, CA)

1990-01-01T23:59:59.000Z

298

Splayed mirror light pipes  

SciTech Connect (OSTI)

An expression is given for the transmission of the rectangular-section mirror light pipe. The expression is used to model throughputs for simulated solar conditions over a calender year. It is found that the splaying of a mirror light pipe results in a significant increase in throughputs particularly in winter months. (author)

Swift, P.D. [School of Physical Sciences, Dublin City University, Dublin 9 (Ireland)

2010-02-15T23:59:59.000Z

299

Explosively pumped laser light  

DOE Patents [OSTI]

A single shot laser pumped by detonation of an explosive in a shell casing. The shock wave from detonation of the explosive causes a rare gas to luminesce. The high intensity light from the gas enters a lasing medium, which thereafter outputs a pulse of laser light to disable optical sensors and personnel.

Piltch, Martin S. (Los Alamos, NM); Michelotti, Roy A. (Los Alamos, NM)

1991-01-01T23:59:59.000Z

300

Reducing home lighting expenses  

SciTech Connect (OSTI)

Ways to reduce lighting expenses are summarized. These include: turning off lights when not in use; keeping fixtures and lamps clean; replacing lamps with more efficient types; using three-way bulbs; use of daylighting; buying fewer lamps and reducing lamp wattage; consider repainting rooms; replacing recessed fixtures with tracklighting; and using efficient lamps for outdoor use. (MCW)

Aimone, M.A.

1981-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

advanced applications singapore: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

. . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

302

advanced application examples: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

. . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

303

advanced accelerator applications: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

. . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

304

advanced applications kyoto: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

. . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

305

International Energy Science Course Application for Doctoral Program  

E-Print Network [OSTI]

International Energy Science Course Application for Doctoral Program Graduate School of Energy STATUS IN DETAIL (description of current job or studies, etc.) CONTACT INFORMATION (address for contact

Takada, Shoji

306

SSL Selections Descriptions v6.xls  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Transparent Conductive Hole Injection Electrode for Organic Light-Emitting Diode (OLED) SSL. This project seeks to develop a cost-effective replacement for...

307

Probing Emissions of Military Cargo Aircraft: Description of...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Emissions of Military Cargo Aircraft: Description of a Joint Field Measurement Strategic Environmental Research and Probing Emissions of Military Cargo Aircraft: Description of a...

308

Westinghouse Lighting: Proposed Penalty (2010-CE-09/1001)  

Broader source: Energy.gov [DOE]

DOE alleged in a Notice of Proposed Civil Penalty that Westinghouse Lighting Corporation failed to certify various flourescent and incandescent reflector lamps as compliant with the applicable energy conservation standards.

309

QLEDs for displays and solid-state lighting  

E-Print Network [OSTI]

The mainstream commercialization of colloidal quantum dots (QDs) for light-emitting applications has begun: Sony televisions emitting QD-enhanced colors are now on sale. The bright and uniquely size-tunable colors of ...

Supran, Geoffrey James Sasaji

310

Chemical Agent Induced Reduction of Skin Light Scattering  

E-Print Network [OSTI]

scattering with the potential to increase the efficacy of light based imaging and therapeutic applications. Three hypotheses have been suggested for the clearing mechanism: index of refraction matching between clearing agent and collagen, tissue dehydration...

Hirshburg, Jason M.

2011-02-22T23:59:59.000Z

311

Lighting affects appearance LightSource emits photons  

E-Print Network [OSTI]

1 Lighting affects appearance #12;2 LightSource emits photons Photons travel in a straight line). And then some reach the eye/camera. #12;3 Reflectance Model how objects reflect light. Model light sources Algorithms for computing Shading: computing intensities within polygons Determine what light strikes what

Jacobs, David

312

Geodesic Active Regions Using Non-parametric Statistical Regional Description and Their  

E-Print Network [OSTI]

Geodesic Active Regions Using Non-parametric Statistical Regional Description and Their Application {mhg,afrangi}@unizar.es Abstract. The inclusion of statistical region-based information in the Geodesic for the segmentation of brain aneurysms in CTA data with the Geodesic Active Regions model. 1 Introduction Brain

Frangi, Alejandro

313

Structure functions for light nuclei  

SciTech Connect (OSTI)

We discuss the nuclear EMC effect with particular emphasis on recent data for light nuclei including 2H, 3He, 4He, 9Be, 12C and 14N. In order to verify the consistency of available data, we calculate the \\chi^2 deviation between different data sets. We find a good agreement between the results from the NMC, SLAC E139, and HERMES experiments. However, our analysis indicates an overall normalization offset of about 2% in the data from the recent JLab E03-103 experiment with respect to previous data for nuclei heavier than 3He. We also discuss the extraction of the neutron/proton structure function ratio F2n/F2p from the nuclear ratios 3He/2H and 2H/1H. Our analysis shows that the E03-103 data on 3He/2H require a renormalization of about 3% in order to be consistent with the F2n/F2p ratio obtained from the NMC experiment. After such a renormalization, the 3He data from the E03-103 data and HERMES experiments are in a good agreement. Finally, we present a detailed comparison between data and model calculations, which include a description of the nuclear binding, Fermi motion and off-shell corrections to the structure functions of bound proton and neutron, as well as the nuclear pion and shadowing corrections. Overall, a good agreement with the available data for all nuclei is obtained.

S.A. Kulagin, R. Petti

2010-11-01T23:59:59.000Z

314

The light-emitting diode (LED) is an fairly new kind of light source found currently in  

E-Print Network [OSTI]

this technology an ideal replacement for less efficient incandescent light sources, particularly in applications elevator lighting has the potential to achieve 25 percent greater efficiency than current incandescent ILLUMINATION LEVELS SIMILAR TO THOSE OF INCANDESCENT FIXTURES WHILE CUTTING ENERGY USE 45 PERCENT. ELEVATOR

315

Energy Star Lighting Verification Program (Program for the Evaluation and Analysis of Residential Lighting)  

SciTech Connect (OSTI)

The Program for the Evaluation and Analysis of Residential Lighting (PEARL) is a watchdog program. It was created in response to complaints received by utility program managers about the performance of certain Energy Star lighting products being promoted within their service territories and the lack of a self-policing mechanism within the lighting industry that would ensure the reliability of these products and their compliance with ENERGY STAR specifications. To remedy these problems, PEARL purchases and tests products that are available to the consumers in the marketplace. The Lighting Research Center (LRC) tests the selected products against the corresponding Energy Star specifications. This report includes the experimental procedure and data results of Cycle Three of PEARL program during the period of October 2002 to April 2003, along with the description of apparatus used, equipment calibration process, experimental methodology, and research findings from the testing. The products tested are 20 models of screw-based compact fluorescent lamps (CFL) of various types and various wattages made or marketed by 12 different manufacturers, and ten models of residential lighting fixtures from eight different manufacturers.

Conan O'Rourke; Yutao Zhou

2006-03-01T23:59:59.000Z

316

Effects of droplet fluctuations on the scattering of neutrons and light by microemulsions  

E-Print Network [OSTI]

Beginning from the first neutron spin-echo study of the shape fluctuations of microemulsion droplets [J.S. Huang, S.T. Milner, B. Farago, and D. Richter, Phys. Rev. Lett. 59, 2600 (1987)] these experiments are incorrectly interpreted in the literature. This is due to an inappropriate account for the fluctuations and the erroneous application of the original theory to the experiments (see [V. Lisy and B. Brutovsky, Czech. J. Phys. 50, 239 (2000)]). In the presented work both these shortcomings are corrected. We develop the theory of static and dynamic light and neutron scattering from droplet microemulsions. The fluids inside and out of the droplets are separated by a surfactant layer of arbitrary thickness. The scattering functions consistently take into account thermal fluctuations of the shapes of such double-layered spheres to the second order in the changes of their radius. The relaxation times and correlation functions of the fluctuations are found within the Helfrich's theory of interfacial elasticity. The theory is applied to the quantitative description of small-angle neutron scattering, neutron spin-echo spectroscopy and dynamic light scattering experiments. Basic characteristics of the microemulsions, extracted from the fits to the experimental data, significantly differ from those determined in the original works. We include into the consideration the viscosity of the surface layer and give its estimation for the octane-C10E5- water microemulsion.

V. Lisy; B. Brutovsky

2000-10-26T23:59:59.000Z

317

Green Light Pulse Oximeter  

DOE Patents [OSTI]

A reflectance pulse oximeter that determines oxygen saturation of hemoglobin using two sources of electromagnetic radiation in the green optical region, which provides the maximum reflectance pulsation spectrum. The use of green light allows placement of an oximetry probe at central body sites (e.g., wrist, thigh, abdomen, forehead, scalp, and back). Preferably, the two green light sources alternately emit light at 560 nm and 577 nm, respectively, which gives the biggest difference in hemoglobin extinction coefficients between deoxyhemoglobin, RHb, and oxyhemoglobin, HbO.sub.2.

Scharf, John Edward (Oldsmar, FL)

1998-11-03T23:59:59.000Z

318

White light velocity interferometer  

DOE Patents [OSTI]

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s.

Erskine, David J. (Oakland, CA)

1997-01-01T23:59:59.000Z

319

White light velocity interferometer  

DOE Patents [OSTI]

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

Erskine, D.J.

1997-06-24T23:59:59.000Z

320

White light velocity interferometer  

DOE Patents [OSTI]

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s.

Erskine, David J. (Oakland, CA)

1999-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

White light velocity interferometer  

DOE Patents [OSTI]

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

Erskine, D.J.

1999-06-08T23:59:59.000Z

322

Lakeview Light and Power- Commercial Lighting Rebate Program  

Broader source: Energy.gov [DOE]

Lakeview Light and Power offers a commercial lighting rebate program. Rebates apply to the installation of energy efficient lighting retrofits in non-residential buildings. The rebate program is...

323

E-Print Network 3.0 - advanced uv light Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

vapour lamp. We propose and demonstrate charge management using a deep UV light emitting diode (LED... sufficient for LISA applications. We have directly observed the LED ......

324

Energy Recovered Light Source Technology at TJNAF | U.S. DOE...  

Office of Science (SC) Website

Energy Recovered Light Source Technology at TJNAF Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Applications of Nuclear Science...

325

Text-Alternative Version: CALiPER Series 21 on LED Linear Lamps and Troffer Lighting  

Broader source: Energy.gov [DOE]

Following is a text version of a video about CALiPER Application Report Series 21 on LED Linear Lamps and Troffer Lighting.

326

Light Collection in Liquid Noble Gases  

SciTech Connect (OSTI)

Liquid noble gases are increasingly used as active detector materials in particle and nuclear physics. Applications include calorimeters and neutrino oscillation experiments as well as searches for neutrinoless double beta decay, direct dark matter, muon electron conversion, and the neutron electric dipole moment. One of the great advantages of liquid noble gases is their copious production of ultraviolet scintillation light, which contains information about event energy and particle type. I will review the scintillation properties of the various liquid noble gases and the means used to collect their scintillation light, including recent advances in photomultiplier technology and wavelength shifters.

McKinsey, Dan [Yale University

2013-05-29T23:59:59.000Z

327

Description of the RDCDS Meteorological Component  

SciTech Connect (OSTI)

This report provides a detailed description of the Rapidly Deployable Chemical Defense System (RDCDS) Meteorological Component. The Meteorological Component includes four surface meteorological stations, miniSODAR, laptop computers, and communications equipment. This report describes the equipment that is used, explains the operation of the network, and gives instructions for setting up the Component and replacing defective parts. A detailed description of operation and use of the individual sensors, including the data loggers is not covered in the current document, and the interested reader should refer to the manufacturer’s documentation.

Pekour, Mikhail S.; Berg, Larry K.

2007-10-01T23:59:59.000Z

328

Caterpillar Light Truck Clean Diesel Program  

SciTech Connect (OSTI)

In 1998, light trucks accounted for over 48% of new vehicle sales in the U.S. and well over half the new Light Duty vehicle fuel consumption. The Light Truck Clean Diesel (LTCD) program seeks to introduce large numbers of advanced technology diesel engines in light-duty trucks that would improve their fuel economy (mpg) by at least 50% and reduce our nation's dependence on foreign oil. Incorporating diesel engines in this application represents a high-risk technical and economic challenge. To meet the challenge, a government-industry partnership (Department of Energy, diesel engine manufacturers, and the automotive original equipment manufacturers) is applying joint resources to meet specific goals that will provide benefits to the nation. [1] Caterpillar initially teamed with Ford Motor Company on a 5 year program (1997-2002) to develop prototype vehicles that demonstrate a 50% fuel economy improvement over the current 1997 gasoline powered light truck vehicle in this class while complying with EPA's Tier II emissions regulations. The light truck vehicle selected for the demonstration is a 1999 Ford F150 SuperCab. To meet the goals of the program, the 4.6 L V-8 gasoline engine in this vehicle will be replaced by an advanced compression ignition direct injection (CIDI) engine. Key elements of the Caterpillar LTCD program plan to develop the advanced CIDI engine are presented in this paper.

Robert L. Miller; Kevin P. Duffy; Michael A. Flinn; Steve A. Faulkner; Mike A. Graham

1999-04-26T23:59:59.000Z

329

Light Vector Mesons  

E-Print Network [OSTI]

This article reviews the current status of experimental results obtained in the measurement of light vector mesons produced in proton-proton and heavy ion collisions at different energies. The review is focused on two phenomena related to the light vector mesons; the modification of the spectral shape in search of Chiral symmetry restoration and suppression of the meson production in heavy ion collisions. The experimental results show that the spectral shape of light vector mesons are modified compared to the parameters measured in vacuum. The nature and the magnitude of the modification depends on the energy density of the media in which they are produced. The suppression patterns of light vector mesons are different from the measurements of other mesons and baryons. The mechanisms responsible for the suppression of the mesons are not yet understood. Systematic comparison of existing experimental results points to the missing data which may help to resolve the problem.

Alexander Milov

2008-12-21T23:59:59.000Z

330

National Synchrotron Light Source  

ScienceCinema (OSTI)

A tour of Brookhaven's National Synchrotron Light Source (NSLS). The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviole

None

2010-01-08T23:59:59.000Z

331

Natural lighting and skylights  

E-Print Network [OSTI]

outlined herein, the feasibility of using scale models for studying skylights is also an established fact. The method of analysis by models can be a valuable tool to any designer who is concerned about day-lighting....

Evans, Benjamin Hampton

1961-01-01T23:59:59.000Z

332

Reading Municipal Light Department- Business Lighting Rebate Program  

Broader source: Energy.gov [DOE]

Reading Municipal Light Department (RMLD) offers incentives for non-residential customers to install energy efficient lights and sensors in existing facilities. In addition to rebates for the...

333

Types of Lighting in Commercial Buildings - Lighting Characteristics  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

of a light source's accuracy in rendering different colors when compared to a reference light source. The highest attainable CRI is 100. Lamps with CRIs above 70 are...

334

Columbia Water and Light- HVAC and Lighting Efficiency Rebates  

Broader source: Energy.gov [DOE]

Columbia Water and Light (CWL) offers rebates to its commercial and industrial customers for the purchase of high efficiency HVAC installations and efficient lighting. Incentives for certain...

335

Induction Lighting: An Old Lighting Technology Made New Again...  

Broader source: Energy.gov (indexed) [DOE]

around the same time that his rival, Thomas Edison, was working to improve the incandescent light bulb. In the early 1990s, several major lighting manufacturers introduced...

336

Peninsula Light Company- Commercial Efficient Lighting Rebate Program  

Broader source: Energy.gov [DOE]

Peninsula Light Company (PLC) offers a rebate program for commercial customers who wish to upgrade to energy efficient lighting. Participating customers must be served by PLC commercial service....

337

Solid state lighting component  

DOE Patents [OSTI]

An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

Yuan, Thomas; Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald

2010-10-26T23:59:59.000Z

338

Solid state lighting component  

DOE Patents [OSTI]

An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald; Yuan, Thomas

2012-07-10T23:59:59.000Z

339

The Integrated Classroom Lighting System (ICLS) is designed for use in general-purpose classrooms at the K-12 through university level. Further, ICLS has applications in a wide range of conference rooms and  

E-Print Network [OSTI]

cartons improves installation times and reduces jobsite waste. Use and Care Manual Every classroom warranty, we will provide a single source warranty on all ICLS electronic and interconnection components energy usage and light output · ICLS is available with 0.77, 0.88, and 1.18 ballast factor electronic

340

Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER  

E-Print Network [OSTI]

Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER Subject Description Monday, July AND INSURANCE 242 ACTUARIAL SCIENCE 243 TRANSPORTATION AND PUBLIC UTILITIES 244 CLASSICS 250 COMMUNICATION ARTS;Subject Description CURRICULAR SUBJECT LISTING BY SUBJECT NUMBER Subject Description Monday, July 14, 2014

Wisconsin at Madison, University of

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Standard-C hydrogen monitoring system, system design description  

SciTech Connect (OSTI)

Standard-C cabinet arrangement system design description for the Standard Hydrogen Monitoring System.

Schneider, T.C., Westinghouse Hanford

1996-08-29T23:59:59.000Z

342

Light and Energy -Daylight measurements  

E-Print Network [OSTI]

Light and Energy - Daylight measurements #12;Light and Energy - Daylight measurements Authors: Jens;3 Title Light and Energy Subtitle Daylight measurements Authors Jens Christoffersen, Ásta Logadóttir ........................................................................................................ 5 Daylight quantity

343

Energy Conservation in Industrial Lighting  

E-Print Network [OSTI]

In order to reduce energy use in lighting Union Carbide recently issued drastically reduced new lighting level standards. A computerized lighting cost program was also developed. Using this program a number of additional energy saving techniques...

Meharg, E.

1979-01-01T23:59:59.000Z

344

Lighting and the Bottom Line  

E-Print Network [OSTI]

A discussion of the cost of light and how it relates to the cost of people. The new Illuminating Engineering Society recommended method of determining lighting levels will be explained. Also several ways of providing good lighting to increase...

Christensen, M.

1981-01-01T23:59:59.000Z

345

Optimization of a two stage light-gas gun  

E-Print Network [OSTI]

. DISCUSSION OF EXPERIMENTS 4. 1 General 4. 2 Description of the Texas A8M Light-Gas Gun. 4. 3 Parametric Tests. 4. 4 Optimization Tests. 4. 5 Experimental Error. V. CONCLUSION REFERENCES. APPENDIX A The Texas A&M Light-Gas Gun Facility. APPENDIX B... to accelerate down the launch tube. Figures (1) and (2) illustrate the components of the gun and the steps in a typical launch cycle. Many factors influence gun performance but these may be grouped into two main categories. First are those dealing with gun...

Rynearson, Richard James

1972-01-01T23:59:59.000Z

346

Light diffusing fiber optic chamber  

DOE Patents [OSTI]

A light diffusion system for transmitting light to a target area. The light is transmitted in a direction from a proximal end to a distal end by an optical fiber. A diffusing chamber is operatively connected to the optical fiber for transmitting the light from the proximal end to the distal end and transmitting said light to said target area. A plug is operatively connected to the diffusing chamber for increasing the light that is transmitted to the target area.

Maitland, Duncan J. (Lafayette, CA)

2002-01-01T23:59:59.000Z

347

QCD and Light-Front Holography  

SciTech Connect (OSTI)

The soft-wall AdS/QCD model, modified by a positive-sign dilaton metric, leads to a remarkable one-parameter description of nonperturbative hadron dynamics. The model predicts a zero-mass pion for zero-mass quarks and a Regge spectrum of linear trajectories with the same slope in the leading orbital angular momentum L of hadrons and the radial quantum number N. Light-Front Holography maps the amplitudes which are functions of the fifth dimension variable z of anti-de Sitter space to a corresponding hadron theory quantized on the light front. The resulting Lorentz-invariant relativistic light-front wave equations are functions of an invariant impact variable {zeta} which measures the separation of the quark and gluonic constituents within the hadron at equal light-front time. The result is to a semi-classical frame-independent first approximation to the spectra and light-front wavefunctions of meson and baryon light-quark bound states, which in turn predict the behavior of the pion and nucleon form factors. The theory implements chiral symmetry in a novel way: the effects of chiral symmetry breaking increase as one goes toward large interquark separation, consistent with spectroscopic data, and the the hadron eigenstates generally have components with different orbital angular momentum; e.g., the proton eigenstate in AdS/QCD with massless quarks has L = 0 and L = 1 light-front Fock components with equal probability. The soft-wall model also predicts the form of the non-perturbative effective coupling {alpha}{sub s}{sup AdS} (Q) and its {beta}-function which agrees with the effective coupling {alpha}{sub g1} extracted from the Bjorken sum rule. The AdS/QCD model can be systematically improved by using its complete orthonormal solutions to diagonalize the full QCD light-front Hamiltonian or by applying the Lippmann-Schwinger method in order to systematically include the QCD interaction terms. A new perspective on quark and gluon condensates is also reviewed.

Brodsky, Stanley J.; /SLAC /Southern Denmark U., CP3-Origins; de Teramond, Guy F.; /Costa Rica U.; ,

2010-10-27T23:59:59.000Z

348

Microscopic description of octupole shape-phase transitions in light actinides and rare-earth nuclei  

E-Print Network [OSTI]

A systematic analysis of low-lying quadrupole and octupole collective states is presented, based on the microscopic energy density functional framework. By mapping the deformation constrained self-consistent axially symmetric mean-field energy surfaces onto the equivalent Hamiltonian of the $sdf$ interacting boson model (IBM), that is, onto the energy expectation value in the boson condensate state, the Hamiltonian parameters are determined. The study is based on the global relativistic energy density functional DD-PC1. The resulting IBM Hamiltonian is used to calculate excitation spectra and transition rates for the positive- and negative-parity collective states in four isotopic chains characteristic for two regions of octupole deformation and collectivity: Th, Ra, Sm and Ba. Consistent with the empirical trend, the microscopic calculation based on the systematics of $\\beta_{2}$-$\\beta_{3}$ energy maps, the resulting low-lying negative-parity bands and transition rates show evidence of a shape transition between stable octupole deformation and octupole vibrations characteristic for $\\beta_{3}$-soft potentials.

K. Nomura; D. Vretenar; T. Niksic; Bing-Nan Lu

2014-02-25T23:59:59.000Z

349

July 18, 2012 Using QECBs for Street Lighting Upgrades  

E-Print Network [OSTI]

lighting technologies (e.g. light-emitting diodes, induction lighting) can reduce street light energy

350

MATLAB Quick Guide Name Description Example  

E-Print Network [OSTI]

MATLAB Quick Guide Symbol/ Command Name Description Example help help Help menu for any command or symbol in MATLAB Help : Help sum % comment MATLAB comment symbol; MATLAB will skip any line beginning for multiplication a = 5 * 5 ; / divide Symbol for division b = 5 / 1 ; ; semi-colon (1) Tells MATLAB to suppress

Smith-Konter, Bridget

351

WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED,  

E-Print Network [OSTI]

DESCRIPTION DETAILS * Radioactive Waste Source Reduction 1,500 Radioactive Waste $6,000 $2,500 $6,000 Waste Yard Sorting Table surveying to sort clean waste from radioactive waste Radioactive Emissions Emission lives. Radioactive Waste generated through wet chemistry Waste Minimization 30 Mixed waste / Liquid

352

Network architecture functional description and design  

SciTech Connect (OSTI)

This report provides a top level functional description and design for the development and implementation of the central network to support the next generation of SNL, Albuquerque supercomputer in a UNIX{reg sign} environment. It describes the network functions and provides an architecture and topology.

Stans, L.; Bencoe, M.; Brown, D.; Kelly, S.; Pierson, L.; Schaldach, C.

1989-05-25T23:59:59.000Z

353

COMMUNITY ADVISOR JOB DESCRIPTION General Statement  

E-Print Network [OSTI]

COMMUNITY ADVISOR JOB DESCRIPTION General Statement Community Advisors are members for their area and the Head Resident. Community Advisors are responsible for meeting the needs of their woodframe is beyond a Community Advisor's level of comfort and competence and refer students to as many resources

Royer, Dana

354

Resident Advisor Position Description Occupational Summary  

E-Print Network [OSTI]

Resident Advisor Position Description Occupational Summary The Resident Advisor (RA) is assigned and Residence Hall policies. The Resident Advisor provides programming based on an assessment of the community and individual needs. The responsibilities of the Resident Advisor position are implemented under the supervision

Bogaerts, Steven

355

Community Advisor Position Description Occupational Summary  

E-Print Network [OSTI]

Community Advisor Position Description Occupational Summary The Community Advisor (CA) is a full success; personal growth; and responsible citizenship. Terms of Appointment The Community Advisor position Monday, May 12, 2014 (5:00pm). Eligibility The Community Advisor must be a full-time student

Bogaerts, Steven

356

FACULTY OF ENGINEERING MODULE DESCRIPTION FORM  

E-Print Network [OSTI]

FACULTY OF ENGINEERING MODULE DESCRIPTION FORM CODE CL508/906 Site Investigation & Risk Assessment-86017-578-2 CIRIA C557 Remedial engineering for closed landfill sites D L Barry, I M Summersgill, R G Gregory et al Module Registrar: Dr P Sentenac Taught To (Course): Civil Engineering Other Lecturers Involved: Credit

Mottram, Nigel

357

EGGN 100 -INTRODUCTION TO ENGINEERING COURSE DESCRIPTION  

E-Print Network [OSTI]

Engineering design project - Continued Week 13 Field Trip to an Engineering site Project reviews, demosEGGN 100 - INTRODUCTION TO ENGINEERING COURSE DESCRIPTION Introduction to engineering disciplines and their sub-fields, basic tools used in engineering practice, hands-on engineering projects. COURSE OBJECTIVE

de Lijser, Peter

358

Sustainable Energy Scheme Mentor Job description  

E-Print Network [OSTI]

1 Sustainable Energy Scheme Mentor Job description Department: Student Administration and Registry and agreement between the Sustainable Energy Scheme Mentor and the UK Student Recruitment and Outreach Team Sustainable Energy Scheme · To participate in both on and off campus mentoring activities throughout

Anderson, Jim

359

Fall 2013 Course Descriptions: For Education Majors  

E-Print Network [OSTI]

will examine how and why pre-modern people distinguished themselves from their neighbors, as Greek/Roman vs, science, and technology. 115 Pre-Modern Course Descriptions: 12053 HIST 115 01 Us vs. Them Constructing Identities in the Pre -Modern World TR 03:05 pm-04:20 pm Buchberger MYBK 302 How we define who we are

Young, Paul Thomas

360

Interns for Indiana (IFI) Project descriptions  

E-Print Network [OSTI]

with the company after graduation, which allows him to work on cutting edge projects, aid in company growthInterns for Indiana (IFI) Projects Project descriptions: · Software development, database design analysis Past student project Development of animated graphics for web portal and product demos -Kevin

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Towards A Mathematical Services Description Olga Caprotti  

E-Print Network [OSTI]

Towards A Mathematical Services Description Language Olga Caprotti Wolfgang Schreiner Research Introduction In the recent years, mathematical software systems, i.e., computer algebra systems like Maple. There are numerous examples in the literature of scien- ti#12;c software needing access to computer algebra methods

362

RECENTER -ADVERSITY INTO TRANSFORMATION Course Description  

E-Print Network [OSTI]

Center" delivers power tools and real time strategies for creating performance transformation ­ no matter what and practical system for transforming your communication skills from the inside and outside. · Use real timeRECENTER - ADVERSITY INTO TRANSFORMATION Course Description: Knowing how to use adversity

Coles, William A.

363

EES 110: Earth Systems Course Description  

E-Print Network [OSTI]

of energy come from? The course includes laboratory exercises that cover map reading skills, rockEES 110: Earth Systems Course Description: This course examines some of the basic processes (held during normal laboratory meeting times): 1. Rocks & Minerals of Upstate SC: A chance to explore

364

Automatic TLI recognition system, general description  

SciTech Connect (OSTI)

This report is a general description of an automatic target recognition system developed at the Idaho National Engineering Laboratory for the Department of Energy. A user`s manual is a separate volume, Automatic TLI Recognition System, User`s Guide, and a programmer`s manual is Automatic TLI Recognition System, Programmer`s Guide. This system was designed as an automatic target recognition system for fast screening of large amounts of multi-sensor image data, based on low-cost parallel processors. This system naturally incorporates image data fusion, and it gives uncertainty estimates. It is relatively low cost, compact, and transportable. The software is easily enhanced to expand the system`s capabilities, and the hardware is easily expandable to increase the system`s speed. In addition to its primary function as a trainable target recognition system, this is also a versatile, general-purpose tool for image manipulation and analysis, which can be either keyboard-driven or script-driven. This report includes descriptions of three variants of the computer hardware, a description of the mathematical basis if the training process, and a description with examples of the system capabilities.

Lassahn, G.D.

1997-02-01T23:59:59.000Z

365

STUDENT LABOR POSITION DESCRIPTION Forestry Department  

E-Print Network [OSTI]

approved STUDENT LABOR POSITION DESCRIPTION Forestry Department Most Recently Updated 10/17/00 Position Title: Student Forestry Technician Must work 10 hrs/wk. or 15 hrs/wk (depending on grade). I. The following are the essential duties for a Forestry Technician in the Forestry Department: 1. Supervise other

Baltisberger, Jay H.

366

The Genetive and Ablative of Description  

E-Print Network [OSTI]

had not yet become a com­ mon descriptive case. The statistics for the nouns in Cicero are based on Merguet; those in Tacitus, on Gerber and Greef, Abl. Gen, Abl. Gen. Abl. Gen in in in in in in earlyearlyCfcc--Cic­ Tac­ Tac Latin ero ero itus...

Cressman, Edmund Dresser

1911-06-01T23:59:59.000Z

367

Business Development Associate -1493 Job Description  

E-Print Network [OSTI]

Business Development Associate - 1493 Job Description: BioTechnique is a contract manufacturing our Business Development efforts. This will offer a start-up environment, with hands-on opportunities with business development in our consulting, software and investments departments. These new graduates

Evans, Paul G.

368

Business of Fashion Concentration & Minor -Newark Description  

E-Print Network [OSTI]

Business of Fashion Concentration & Minor - Newark Description The Business of Fashion program was designed to bridge the gap between creativity and business acumen. It is for artistic individuals who want to solidify their understanding of business, as well as for business students who want to learn how to apply

Lin, Xiaodong

369

WARREN RESIDENTIAL LIFE RESIDENT ASSISTANT POSITION DESCRIPTION  

E-Print Network [OSTI]

WARREN RESIDENTIAL LIFE RESIDENT ASSISTANT POSITION DESCRIPTION The position of Resident Assistant for students living within the Warren College residential community. Resident Assistant's (RA's) are principle members of the Warren Residential Life staff. In accordance with the University of California's Personnel

Russell, Lynn

370

WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED,  

E-Print Network [OSTI]

WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED, REUSED, RECYCLED OR CONSERVED IN 2004 WASTE TYPE Brake Cleaner Recycling System Mercury Utility Devices Substitution 60 Hazardous Waste $1,750 $2,500 $1 of one PCB spill and clean-up event. Organic Solvents Substitution 678 Hazardous Waste $1,355 $36,500 $26

371

The Ideal Transformer Description and Circuit Symbol  

E-Print Network [OSTI]

The Ideal Transformer Description and Circuit Symbol As with all the other circuit elements, there is a physical transformer commonly used in circuits whose behavior can be discussed in great detail. However, in many cases the practical transformer can be adequately approximated by the "ideal transformer," which

King, Roger

372

DESCRIPTION OF ACCIDENT MSU DRIVERS SIGNATURE  

E-Print Network [OSTI]

DESCRIPTION OF ACCIDENT MSU DRIVERS SIGNATURE Signature 2-9-108, MCA (Statutory Coverage, in lieu-90-(4-20). CERTIFICATE OF INSURANCE X Weather Conditions: ACCIDENT INFORMATION Location: Date: - - 20 Time: : .M. Driver and Risk Management ~ 1160 Research Drive Bozeman, MT 59718 ~ (406) 994-2711 Accident Form #12;OTHER

Dyer, Bill

373

Position Description Website and Video Coordinator  

E-Print Network [OSTI]

, feature content that supports the School's mission and employs best practices (i.e. chunking content, short pages, bulleted list, etc.); follow best practices with search engine optimization; creating clearPosition Description Website and Video Coordinator School of Global Environmental Sustainability

Barnes, Elizabeth A.

374

System design description cone penetrometer system  

SciTech Connect (OSTI)

The system design description documents in detail the design of the cone penetrometer system. The systems includes the cone penetrometer physical package, raman spectroscopy package and moisture sensor package. Information pertinent to the system design, development, fabrication and testing is provided.

Seda, R.Y., Westinghouse Hanford

1996-08-12T23:59:59.000Z

375

Efficiency Maine Residential Lighting Program  

Broader source: Energy.gov [DOE]

Efficiency Maine's Residential Lighting Program works directly with retailers and manufacturers to encourage residential customers to purchase energy-efficient lighting. Rebate amounts average $1...

376

Low Energy Description of Quantum Gravity and Complementarity  

E-Print Network [OSTI]

We consider a framework in which low energy dynamics of quantum gravity is described preserving locality, and yet taking into account the effects that are not captured by the naive global spacetime picture, e.g. those associated with black hole complementarity. Our framework employs a "special relativistic" description of gravity; specifically, gravity is treated as a force measured by the observer tied to the coordinate system associated with a freely falling local Lorentz frame. We identify, in simple cases, regions of spacetime in which low energy local descriptions are applicable as viewed from the freely falling frame; in particular, we identify a surface called the gravitational observer horizon on which the local proper acceleration measured in the observer's coordinates becomes the cutoff (string) scale. This allows for separating between the "low-energy" local physics and "trans-Planckian" intrinsically quantum gravitational (stringy) physics, and allows for developing physical pictures of the origins of various effects. We explore the structure of the Hilbert space in which the proposed scheme is realized in a simple manner, and classify its elements according to certain horizons they possess. We also discuss implications of our framework on the firewall problem. We conjecture that the complementarity picture may persist due to properties of trans-Planckian physics.

Yasunori Nomura; Jaime Varela; Sean J. Weinberg

2014-05-10T23:59:59.000Z

377

Big Crunch-based omnidirectional light concentrators  

E-Print Network [OSTI]

Omnidirectional light concentration remains an unsolved problem despite such important practical applications as design of efficient mobile photovoltaic cells. Optical black hole designs developed recently offer partial solution to this problem. However, even these solutions are not truly omnidirectional since they do not exhibit a horizon, and at large enough incidence angles light may be trapped into quasi-stationary orbits around such imperfect optical black holes. Here we propose and realize experimentally another gravity-inspired design of a broadband omnidirectional light concentrator based on the cosmological Big Crunch solutions. By mimicking the Big Crunch spacetime via corresponding effective optical metric we make sure that every photon world line terminates in a single point.

Igor I. Smolyaninov; Yu-Ju Hung

2014-05-16T23:59:59.000Z

378

Procedure to Measure Indoor Lighting Energy Performance  

SciTech Connect (OSTI)

This document provides standard definitions of performance metrics and methods to determine them for the energy performance of building interior lighting systems. It can be used for existing buildings and for proposed buildings. The primary users for whom these documents are intended are building energy analysts and technicians who design, install, and operate data acquisition systems, and who analyze and report building energy performance data. Typical results from the use of this procedure are the monthly and annual energy used for lighting, energy savings from occupancy or daylighting controls, and the percent of the total building energy use that is used by the lighting system. The document is not specifically intended for retrofit applications. However, it does complement Measurement and Verification protocols that do not provide detailed performance metrics or measurement procedures.

Deru, M.; Blair, N.; Torcellini, P.

2005-10-01T23:59:59.000Z

379

Instructions and Data Form for Local Authority Having Jurisdiction to Submit Adjustments to Default Outdoor Lighting Zones  

E-Print Network [OSTI]

Outdoor Lighting Zones Adjustments to Default Outdoor Lighting Zones A local Authority Having Jurisdiction (AHJ) may officially adopt changes to the default Outdoor Lighting Zone designation of an area the proposed change. For example, the AHJ may determine areas where Outdoor Lighting Zone 4 is applicable

380

Journal of Light Emitting Diodes Vol 2 N0 1, April 2010 1 Abstract--Semiconductor nanocrystal quantum dots (NQD)  

E-Print Network [OSTI]

Journal of Light Emitting Diodes Vol 2 N0 1, April 2010 1 Abstract-- Semiconductor nanocrystal convertors integrated on light-emitting diodes (LEDs). The use of nonradiative energy transfer, also known-LEDs for lighting applications. Index Terms-- Förster resonance energy transfer, light emitting diode, nanocrystal

Demir, Hilmi Volkan

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Lighting affects appearance LightSource emits photons  

E-Print Network [OSTI]

1 Lighting affects appearance #12;2 LightSource emits photons Photons travel in a straight line). And then some reach the eye/camera. #12;3 Basic fact: Light is linear Double intensity of sources, double photons reaching eye. Turn on two lights, and photons reaching eye are same as sum of number when each

Jacobs, David

382

ECE 466: LED Lighting Systems -Incandescent lightings rise and  

E-Print Network [OSTI]

versus cost - Power Electronic Drives for CFL and LED light sources to achieve dimmable operation - Basic electric AC and DC circuits at Sophomore level or equivalents Absolutes Lighting System Requirements index as a metric of a light source - Power Electronic Energy sources driving light sources in a compact

Schumacher, Russ

383

Lighting and Surfaces 11.1 Introduction to Lighting  

E-Print Network [OSTI]

-object-at-a-time. "Intrinsic" light is the light emitted by the object itself, such as the glow from a TV screen, a light-emitting diode, or a star. "Ambient" light is an illumination that seems to come from all sides. In the real

Boyd, John P.

384

Sandia National Laboratories: White Light Creation Architectures  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

TechnologiesWhite Light Creation Architectures White Light Creation Architectures Overview of SSL White Light Creation Architectures The entire spectral range of visible light can...

385

Quantum field theoretical description for the reflectivity of graphene  

E-Print Network [OSTI]

We derive the polarization tensor of graphene at nonzero temperature in (2+1)-dimensional space-time. The obtained tensor coincides with the previously known one at all Matsubara frequencies, but, in contrast to it, admits analytic continuation to the real frequency axis satisfying all physical requirements. Using the obtained representation for the polarization tensor, we develope quantum field theoretical description for the reflectivity of graphene. The analytic asymptotic expressions for the reflection coefficients and reflectivities at low and high frequencies are derived for both independent polarizations of the electromagnetic field. The dependencies of reflectivities on the frequency and angle of incidence are investigated. Numerical computations using the exact expressions for the polarization tensor are performed and application regions for the analytic asymptotic results are determined.

Bordag, M; Mostepanenko, V M; Petrov, V M

2015-01-01T23:59:59.000Z

386

Pupillary efficient lighting system  

DOE Patents [OSTI]

A lighting system having at least two independent lighting subsystems each with a different ratio of scotopic illumination to photopic illumination. The radiant energy in the visible region of the spectrum of the lighting subsystems can be adjusted relative to each other so that the total scotopic illumination of the combined system and the total photopic illumination of the combined system can be varied independently. The dilation or contraction of the pupil of an eye is controlled by the level of scotopic illumination and because the scotopic and photopic illumination can be separately controlled, the system allows the pupil size to be varied independently of the level of photopic illumination. Hence, the vision process can be improved for a given level of photopic illumination.

Berman, Samuel M. (San Francisco, CA); Jewett, Don L. (Mill Valley, CA)

1991-01-01T23:59:59.000Z

387

Light harvesting arrays  

DOE Patents [OSTI]

A light harvesting array useful for the manufacture of devices such as solar cells comprises: (a) a first substrate comprising a first electrode; and (b) a layer of light harvesting rods electrically coupled to the first electrode, each of the light harvesting rods comprising a polymer of Formula I: X.sup.1.paren open-st.X.sup.m+1).sub.m (I) wherein m is at least 1, and may be from two, three or four to 20 or more; X.sup.1 is a charge separation group (and preferably a porphyrinic macrocycle, which may be one ligand of a double-decker sandwich compound) having an excited-state of energy equal to or lower than that of X.sup.2, and X.sup.2 through X.sup.m+1 are chromophores (and again are preferably porphyrinic macrocycles).

Lindsey, Jonathan S. (Raleigh, NC)

2002-01-01T23:59:59.000Z

388

Light emitting ceramic device  

DOE Patents [OSTI]

A light-emitting ceramic based panel, hereafter termed "electroceramescent" panel, is herein claimed. The electroceramescent panel is formed on a substrate providing mechanical support as well as serving as the base electrode for the device. One or more semiconductive ceramic layers directly overlay the substrate, and electrical conductivity and ionic diffusion are controlled. Light emitting regions overlay the semiconductive ceramic layers, and said regions consist sequentially of a layer of a ceramic insulation layer and an electroluminescent layer, comprised of doped phosphors or the equivalent. One or more conductive top electrode layers having optically transmissive areas overlay the light emitting regions, and a multi-layered top barrier cover comprising one or more optically transmissive non-combustible insulation layers overlay said top electrode regions.

Valentine, Paul; Edwards, Doreen D.; Walker, Jr., William John; Slack, Lyle H.; Brown, Wayne Douglas; Osborne, Cathy; Norton, Michael; Begley, Richard

2010-05-18T23:59:59.000Z

389

Basal application of systemic insecticides to cotton plants  

E-Print Network [OSTI]

should be conducted to perfect an alternative technique for anointing the brushes with the insecticide formulation. Two possible alternatives are suggested for consideration. A. Meter the insecticide into the hub of each brush through a hollow drive.... INTRODUCTION II. REVIEW OF LITERATURE III. METHODS AND MATERIALS Design Description of Applicator Members Rotary brush applicator Stationary brush applicator Lateral spray applicator Description of the Test, Mixture Laboratory Evaluation Procedure...

Reeves, Beverly Gray

1965-01-01T23:59:59.000Z

390

Image description. Cover Image End of image description. NATIONAL CENTER FOR EDUCATION STATISTICS  

E-Print Network [OSTI]

a context for examining the data they submitted to IPEDS. Our goal is to produce a report that is useful University 2 #12;Image description. Bar chart with 10 groups with 2 items per group.Y scale titled Percent

Mohaghegh, Shahab

391

Energy Star Lighting Verification Program (Program for the Evaluation and Analysis of Residential Lighting)  

SciTech Connect (OSTI)

The Program for the Evaluation and Analysis of Residential Lighting (PEARL) is a watchdog program. It was created in response to complaints received by utility program managers about the performance of certain Energy Star lighting products being promoted within their service territories and the lack of a self-policing mechanism within the lighting industry that would ensure the reliability of these products and their compliance with ENERGY STAR specifications. To remedy these problems, PEARL purchases and tests products that are available to the consumers in the marketplace. The Lighting Research Center (LRC) tests the selected products against the corresponding Energy Star specifications. This report includes the experimental procedure and data results of Cycle Three and Cycle Four of PEARL program during the period of April 2003 to October 2003, along with the description of apparatus used, equipment calibration process, experimental methodology, and research findings from the testing. The parameter tested for Cycle three is lumen maintenance at 40% rated life, and parameters tested for Cycle Four are all parameters required in Energy Star specifications except lumen maintenance at 40% rated life.

Conan O'Rourke; Yutao Zhou

2006-03-01T23:59:59.000Z

392

Real-time Lighting System for Large Group Interaction Joshua Randall  

E-Print Network [OSTI]

Real-time Lighting System for Large Group Interaction Joshua Randall Massachusetts Institute of Technology May 2002 Abstract Lighting systems have historically been controlled by an individual or small group of human operators working together in real-time. Applications for real-time lighting control

393

Combining Global and Local Virtual Lights for Detailed Glossy Illumination Tomas Davidovic  

E-Print Network [OSTI]

approach Figure 1: Comparison of our approach with Virtual Spherical Lights (VSLs). Left: VSLs fail of these algorithms in design applications. Recently, virtual spherical lights [Hasan et al. 2009] were introducedCombining Global and Local Virtual Lights for Detailed Glossy Illumination Tom´as Davidovic

Bala, Kavita

394

Understanding the Mechanism of Highly Efficient Nanoparticle-Mediated Conversion of Light to Steam  

E-Print Network [OSTI]

Conversion of Light to Steam Nathaniel J. Hogan,1 Alexander Urban,2 Alberto Pimpinelli,3 Ciceron Ayala in the application of light-harvesting nanoparticles as efficient producers of solar steam. With broad the mechanism whereby such particles convert light into usable steam is a crucial step. Much debate has centered

395

MANDATORY MEASURES INDOOR LIGHTING CONTROLS  

E-Print Network [OSTI]

MANDATORY MEASURES INDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.1) #12;SECTION 4 MANDATORY LIGHTING CONTROLS 1. 130.1 (a) Area Controls: Manual controls that control lighting in each area separately 2. 130.1 (b) Multi-level Controls: Allow occupants to choose the appropriate light level for each

California at Davis, University of

396

MANDATORY MEASURES INDOOR LIGHTING CONTROLS  

E-Print Network [OSTI]

MANDATORY MEASURES INDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.1) #12;SECTION 3 MANDATORY LIGHTING CONTROLS 1. 130.1 (a) Area Controls: Manual controls that control lighting in each area separately 2. 130.1 (b) Multi-level Controls: "Dimmability." Allow occupants to choose the appropriate light

California at Davis, University of

397

LIGHTING 101 1. Common terminology  

E-Print Network [OSTI]

SECTION 3 LIGHTING 101 1. Common terminology 2. Sources & luminaires 3. Controls #12;SECTION 3SECTION 3 DISCUSSION: COMMON LIGHTING TERMINOLOGY 1. What are the definitions of the following lighting terms? 2. Do you use these terms in professional practice? 3. What other lighting terminology do you use

California at Davis, University of

398

MANDATORY MEASURES INDOOR LIGHTING CONTROLS  

E-Print Network [OSTI]

MANDATORY MEASURES INDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.1) #12;SECTION 5 MANDATORY LIGHTING CONTROLS 1. Area Controls: Manual controls that control lighting in each area separately 2. Multi-level Controls: Allow occupants to choose the appropriate light level for each area 3. Shut

California at Davis, University of

399

LIGHTING 101 1. Common terminology  

E-Print Network [OSTI]

LIGHTING 101 1. Common terminology 2. Sources and luminaires 3. Controls #12;SECTION 2 DISCUSSION: COMMON LIGHTING TERMINOLOGY 1. What are the definitions of the following lighting terms? 2. Do you use these terms in professional practice? 3. What other lighting terminology do you use on the job? SLIDE 14

California at Davis, University of

400

Extreme Ultraviolet Light Chris Cosio  

E-Print Network [OSTI]

Prospectus Extreme Ultraviolet Light Chris Cosio #12;The field of extreme ultraviolet light (XUV to the way XUV interacts with object, XUV properties are difficult to observe. Extreme ultraviolet light is absorbed by all objects it comes in contact with. Furthermore, extreme ultraviolet light also has low

Hart, Gus

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Structure functions for light nuclei  

SciTech Connect (OSTI)

We discuss the nuclear EMC effect with particular emphasis on recent data for light nuclei including {sup 2}H, {sup 3}He, {sup 4}He, {sup 9}Be, {sup 12}C, and {sup 14}N. In order to verify the consistency of available data, we calculate the {chi}{sup 2} deviation between different data sets. We find a good agreement between the results from the NMC, SLAC E139, and HERMES experiments. However, our analysis indicates an overall normalization offset of about 2% in the data from the recent JLab E03-103 experiment with respect to previous data for nuclei heavier than {sup 3}He. We also discuss the extraction of the neutron/proton structure function ratio F{sub 2}{sup n}/F{sub 2}{sup p} from the nuclear ratios {sup 3}He/{sup 2}H and {sup 2}H/{sup 1}H. Our analysis shows that the E03-103 data on {sup 3}He/{sup 2}H require a renormalization of about 3% in order to be consistent with the F{sub 2}{sup n}/F{sub 2}{sup p} ratio obtained from the NMC experiment. After such a renormalization, the {sup 3}He data from the E03-103 and HERMES experiments are in a good agreement. Finally, we present a detailed comparison between data and model calculations, which include a description of the nuclear binding, Fermi motion, and off-shell corrections to the structure functions of bound proton and neutron, as well as the nuclear pion and shadowing corrections. Overall, a good agreement with the available data for all nuclei is obtained.

Kulagin, S. A. [Institute for Nuclear Research of the Russian Academy of Sciences, 117312 Moscow (Russian Federation); Petti, R. [Department of Physics and Astronomy, University of South Carolina, Columbia, South Carolina 29208 (United States)

2010-11-15T23:59:59.000Z

402

Light sources based on semiconductor current filaments  

DOE Patents [OSTI]

The present invention provides a new type of semiconductor light source that can produce a high peak power output and is not injection, e-beam, or optically pumped. The present invention is capable of producing high quality coherent or incoherent optical emission. The present invention is based on current filaments, unlike conventional semiconductor lasers that are based on p-n junctions. The present invention provides a light source formed by an electron-hole plasma inside a current filament. The electron-hole plasma can be several hundred microns in diameter and several centimeters long. A current filament can be initiated optically or with an e-beam, but can be pumped electrically across a large insulating region. A current filament can be produced in high gain photoconductive semiconductor switches. The light source provided by the present invention has a potentially large volume and therefore a potentially large energy per pulse or peak power available from a single (coherent) semiconductor laser. Like other semiconductor lasers, these light sources will emit radiation at the wavelength near the bandgap energy (for GaAs 875 nm or near infra red). Immediate potential applications of the present invention include high energy, short pulse, compact, low cost lasers and other incoherent light sources.

Zutavern, Fred J. (Albuquerque, NM); Loubriel, Guillermo M. (Albuquerque, NM); Buttram, Malcolm T. (Sandia Park, NM); Mar, Alan (Albuquerque, NM); Helgeson, Wesley D. (Albuquerque, NM); O'Malley, Martin W. (Edgewood, NM); Hjalmarson, Harold P. (Albuquerque, NM); Baca, Albert G. (Albuquerque, NM); Chow, Weng W. (Cedar Crest, NM); Vawter, G. Allen (Albuquerque, NM)

2003-01-01T23:59:59.000Z

403

Variable Light-Cone Theory of Gravity  

E-Print Network [OSTI]

We show how to reformulate Variable Speed of Light Theories (VSLT) in a covariant fashion as Variable Light-Cone Theories (VLCT) by introducing two vierbein bundles each associated with a distinct metric. The basic gravitational action relates to one bundle while matter propagates relative to the other in a conventional way. The variability of the speed of light is represented by the variability of the matter light-cone relative to the gravitational light-cone. The two bundles are related locally by an element M, of SL(4,R). The dynamics of the field M is that of a SL(4,R)-sigma model gauged with respect to local (orthochronous) Lorentz transformations on each of the bundles. Only the ``massless'' version of the model with a single new coupling, F, that has the same dimensions as Newton's constant $G_N$, is considered in this paper. When F vanishes the theory reduces to standard General Relativity. We verify that the modified Bianchi identities of the model are consistent with the standard conservation law for the matter energy-momentum tensor in its own background metric. The implications of the model for some simple applications are examined, the Newtonian limit, the flat FRW universe and the spherically symmetric static solution.

I. T. Drummond

1999-08-20T23:59:59.000Z

404

1993 baseline solid waste management system description  

SciTech Connect (OSTI)

Pacific Northwest Laboratory has prepared this report under the direction of Westinghouse Hanford Company. The report provides an integrated description of the system planned for managing Hanford`s solid low-level waste, low-level mixed waste, transuranic waste, and transuranic mixed waste. The primary purpose of this document is to illustrate a collective view of the key functions planned at the Hanford Site to handle existing waste inventories, as well as solid wastes that will be generated in the future. By viewing this system as a whole rather than as individual projects, key facility interactions and requirements are identified and a better understanding of the overall system may be gained. The system is described so as to form a basis for modeling the system at various levels of detail. Model results provide insight into issues such as facility capacity requirements, alternative system operating strategies, and impacts of system changes (ie., startup dates). This description of the planned Hanford solid waste processing system: defines a baseline system configuration; identifies the entering waste streams to be managed within the system; identifies basic system functions and waste flows; and highlights system constraints. This system description will evolve and be revised as issues are resolved, planning decisions are made, additional data are collected, and assumptions are tested and changed. Out of necessity, this document will also be revised and updated so that a documented system description, which reflects current system planning, is always available for use by engineers and managers. It does not provide any results generated from the many alternatives that will be modeled in the course of analyzing solid waste disposal options; such results will be provided in separate documents.

Armacost, L.L.; Fowler, R.A.; Konynenbelt, H.S.

1994-02-01T23:59:59.000Z

405

Inductive Corrections of Action Descriptions Marcello Balduccini  

E-Print Network [OSTI]

description AD is a set of dynamic laws and state constraints1 . A recorded history up to step cT, Hc, its head holds. 1. h(L, T) s law(W), head(W, L), prec h(W, T). % If the preconditions hold and the action occurred, the head holds at the next step. 2. h(L, T + 1) d law(W), head(W, L), prec h(W, T

Zhang, Yuanlin

406

Property:Technology Description | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: EnergyPotentialUrbanUtilityScalePVCapacity Jump to: navigation,WebsiteRenewableBiofuelTechnology Description

407

Petroglyphs, Lighting, and Magnetism  

E-Print Network [OSTI]

1950 Electricity and Magnetism: Theory and Applications.I Petroglyphs, Lightning, and Magnetism | Walker Figure 8.I Petroglyphs, Lightning, and Magnetism | Walker Figure IL

Walker, Merle F

2007-01-01T23:59:59.000Z

408

Light Duty Efficient, Clean Combustion  

SciTech Connect (OSTI)

Cummins has successfully completed the Light Duty Efficient Clean Combustion (LDECC) cooperative program with DoE. This program was established in 2007 in support of the Department of Energy's Vehicles Technologies Advanced Combustion and Emissions Control initiative to remove critical barriers to the commercialization of advanced, high efficiency, emissions compliant internal combustion (IC) engines for light duty vehicles. Work in this area expanded the fundamental knowledge of engine combustion to new regimes and advanced the knowledge of fuel requirements for these diesel engines to realize their full potential. All of the following objectives were met with fuel efficiency improvement targets exceeded: (1) Improve light duty vehicle (5000 lb. test weight) fuel efficiency by 10.5% over today's state-of-the-art diesel engine on the FTP city drive cycle; (2) Develop and design an advanced combustion system plus aftertreatment system that synergistically meets Tier 2 Bin 5 NOx and PM emissions standards while demonstrating the efficiency improvements; (3) Maintain power density comparable to that of current conventional engines for the applicable vehicle class; and (4) Evaluate different fuel components and ensure combustion system compatibility with commercially available biofuels. Key accomplishments include: (1) A 25% improvement in fuel efficiency was achieved with the advanced LDECC engine equipped with a novel SCR aftertreatment system compared to the 10.5% target; (2) An 11% improvement in fuel efficiency was achieved with the advanced LDECC engine and no NOx aftertreamtent system; (3) Tier 2 Bin 5 and SFTP II emissions regulations were met with the advanced LDECC engine equipped with a novel SCR aftertreatment system; (4) Tier 2 Bin 5 emissions regulations were met with the advanced LDECC engine and no NOx aftertreatment, but SFTP II emissions regulations were not met for the US06 test cycle - Additional technical barriers exist for the no NOx aftertreatment engine; (5) Emissions and efficiency targets were reached with the use of biodiesel. A variety of biofuel feedstocks (soy, rapeseed, etc.) was investigated; (6) The advanced LDECC engine with low temperature combustion was compatible with commercially available biofuels as evaluated by engine performance testing and not durability testing; (7) The advanced LDECC engine equipped with a novel SCR aftertreatment system is the engine system architecture that is being further developed by the Cummins product development organization. Cost reduction and system robustness activities have been identified for future deployment; (8) The new engine and aftertreatment component technologies are being developed by the Cummins Component Business units (e.g. fuel system, turbomachinery, aftertreatment, electronics, etc.) to ensure commercial viability and deployment; (9) Cummins has demonstrated that the technologies developed for this program are scalable across the complete light duty engine product offerings (2.8L to 6.7L engines); and (10) Key subsystems developed include - sequential two stage turbo, combustions system for low temperature combustion, novel SCR aftertreatment system with feedback control, and high pressure common rail fuel system. An important element of the success of this project was leveraging Cummins engine component technologies. Innovation in component technology coupled with system integration is enabling Cummins to move forward with the development of high efficiency clean diesel products with a long term goal of reaching a 40% improvement in thermal efficiency for the engine plus aftertreatment system. The 40% improvement is in-line with the current light duty vehicle efficiency targets set by the 2010 DoE Vehicle Technologies MYPP and supported through co-operative projects such as the Cummins Advanced Technology Powertrains for Light-Duty Vehicles (ATP-LD) started in 2010.

Donald Stanton

2010-12-31T23:59:59.000Z

409

Light Duty Efficient, Clean Combustion  

SciTech Connect (OSTI)

Cummins has successfully completed the Light Duty Efficient Clean Combustion (LDECC) cooperative program with DoE. This program was established in 2007 in support of the Department of Energy’s Vehicles Technologies Advanced Combustion and Emissions Control initiative to remove critical barriers to the commercialization of advanced, high efficiency, emissions compliant internal combustion (IC) engines for light duty vehicles. Work in this area expanded the fundamental knowledge of engine combustion to new regimes and advanced the knowledge of fuel requirements for these diesel engines to realize their full potential. All of the following objectives were met with fuel efficiency improvement targets exceeded: 1. Improve light duty vehicle (5000 lb. test weight) fuel efficiency by 10.5% over today’s state-ofthe- art diesel engine on the FTP city drive cycle 2. Develop & design an advanced combustion system plus aftertreatment system that synergistically meets Tier 2 Bin 5 NOx and PM emissions standards while demonstrating the efficiency improvements. 3. Maintain power density comparable to that of current conventional engines for the applicable vehicle class. 4. Evaluate different fuel components and ensure combustion system compatibility with commercially available biofuels. Key accomplishments include: ? A 25% improvement in fuel efficiency was achieved with the advanced LDECC engine equipped with a novel SCR aftertreatment system compared to the 10.5% target ? An 11% improvement in fuel efficiency was achieved with the advanced LDECC engine and no NOx aftertreamtent system ? Tier 2 Bin 5 and SFTP II emissions regulations were met with the advanced LDECC engine equipped with a novel SCR aftertreatment system ? Tier 2 Bin 5 emissions regulations were met with the advanced LDECC engine and no NOx aftertreatment, but SFTP II emissions regulations were not met for the US06 test cycle – Additional technical barriers exist for the no NOx aftertreatment engine ? Emissions and efficiency targets were reached with the use of biodiesel. A variety of biofuel feedstocks (soy, rapeseed, etc.) was investigated. ? The advanced LDECC engine with low temperature combustion was compatible with commercially available biofuels as evaluated by engine performance testing and not durability testing. ? The advanced LDECC engine equipped with a novel SCR aftertreatment system is the engine system architecture that is being further developed by the Cummins product development organization. Cost reduction and system robustness activities have been identified for future deployment. ? The new engine and aftertreatment component technologies are being developed by the Cummins Component Business units (e.g. fuel system, turbomachinery, aftertreatment, electronics, etc.) to ensure commercial viability and deployment ? Cummins has demonstrated that the technologies developed for this program are scalable across the complete light duty engine product offerings (2.8L to 6.7L engines) ? Key subsystems developed include – sequential two stage turbo, combustions system for low temperature combustion, novel SCR aftertreatment system with feedback control, and high pressure common rail fuel system An important element of the success of this project was leveraging Cummins engine component technologies. Innovation in component technology coupled with system integration is enabling Cummins to move forward with the development of high efficiency clean diesel products with a long term goal of reaching a 40% improvement in thermal efficiency for the engine plus aftertreatment system. The 40% improvement is in-line with the current light duty vehicle efficiency targets set by the 2010 DoE Vehicle Technologies MYPP and supported through co-operative projects such as the Cummins Advanced Technology Powertrains for Light- Duty Vehicles (ATP-LD) started in 2010.

Stanton, Donald W

2011-06-03T23:59:59.000Z

410

Sweetness and light   

E-Print Network [OSTI]

1. Sweetness and Light. A novel. Judi lives in a nice, clean house with her seventeen year old stepson, who won’t talk to her in anything but monosyllables. His father, Nelson, and she are struggling to relate to each ...

Craig, Katie

2014-07-03T23:59:59.000Z

411

Design of globally optimal multiple description scalar quantizers  

E-Print Network [OSTI]

This thesis investigates the design of globally optimal multiple description scalar quantizers. The design of multiple description scalar quantizers is formulated as a combinatorial optimization problem due to the index assignment issue. The first...

Desilva, Buveneka Kanishka

2012-06-07T23:59:59.000Z

412

SY101 in situ viscometer instrument system design description  

SciTech Connect (OSTI)

This documents the design and description of the in situ viscometer, developed for the hydrogen mitigation project.

Pearce, K.L.; Stokes, T.I.; Vagelatos, N.

1994-08-18T23:59:59.000Z

413

STEP Energy Coach and Technical Consultant Job Descriptions  

Broader source: Energy.gov [DOE]

STEP Energy Coach and Technical Consultant Job Descriptions, from the Tool Kit Framework: Small Town University Energy Program (STEP).

414

SYLLABUS CH317 Descriptive Inorganic Chemistry  

E-Print Network [OSTI]

. The course has been organized into three modules: 1) Basic skills and the scientific method; 2) Energy. The course does not require students to have extensive prior laboratory experience. As part of the course that include plastics and textiles, and from the formation of low-energy LED light sources to porous materials

415

Incremental Machine Descriptions for GCC Sameera Deshpande Uday P. Khedker  

E-Print Network [OSTI]

Incremental Machine Descriptions for GCC Sameera Deshpande Uday P. Khedker Indian Institute of Technology, Bombay {sameera,uday}@cse.iitb.ac.in Abstract The mechanism of providing machine descriptions a GCC port exists. However, this mechanism is quite ad hoc and the machine descriptions are dif- ficult

Khedker, Uday

416

Light cone matrix product  

SciTech Connect (OSTI)

We show how to combine the light-cone and matrix product algorithms to simulate quantum systems far from equilibrium for long times. For the case of the XXZ spin chain at {Delta} = 0.5, we simulate to a time of {approx} 22.5. While part of the long simulation time is due to the use of the light-cone method, we also describe a modification of the infinite time-evolving bond decimation algorithm with improved numerical stability, and we describe how to incorporate symmetry into this algorithm. While statistical sampling error means that we are not yet able to make a definite statement, the behavior of the simulation at long times indicates the appearance of either 'revivals' in the order parameter as predicted by Hastings and Levitov (e-print arXiv:0806.4283) or of a distinct shoulder in the decay of the order parameter.

Hastings, Matthew B [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

417

OLEDS FOR GENERAL LIGHTING  

SciTech Connect (OSTI)

The goal of this program was to reduce the long term technical risks that were keeping the lighting industry from embracing and developing organic light-emitting diode (OLED) technology for general illumination. The specific goal was to develop OLEDs for lighting to the point where it was possible to demonstrate a large area white light panel with brightness and light quality comparable to a fluorescence source and with an efficacy comparable to that of an incandescent source. it was recognized that achieving this would require significant advances in three area: (1) the improvement of white light quality for illumination, (2) the improvement of OLED energy efficiency at high brightness, and (3) the development of cost-effective large area fabrication techniques. The program was organized such that, each year, a ''deliverable'' device would be fabricated which demonstrated progress in one or more of the three critical research areas. In the first year (2001), effort concentrated on developing an OLED capable of generating high illumination-quality white light. Ultimately, a down-conversion method where a blue OLED was coupled with various down-conversion layers was chosen. Various color and scattering models were developed to aid in material development and device optimization. The first year utilized this approach to deliver a 1 inch x 1 inch OLED with higher illumination-quality than available fluorescent sources. A picture of this device is shown and performance metrics are listed. To their knowledge, this was the first demonstration of true illumination-quality light from an OLED. During the second year, effort concentrated on developing a scalable approach to large area devices. A novel device architecture consisting of dividing the device area into smaller elements that are monolithically connected in series was developed. In the course of this development, it was realized that, in addition to being scalable, this approach made the device tolerant to the most common OLED defect--electrical shorts. This architecture enabled the fabrication of a 6 inch x 6 inch OLED deliverable for 2002. A picture of this deliverable is shown and the performance metrics are listed. At the time, this was the highest efficiency, highest lumen output illumination-quality OLED in existence. The third year effort concentrated on improving the fabrication yield of the 6 inch x 6 inch devices and improving the underlying blue device efficiency. An efficiency breakthrough was achieved through the invention of a new device structure such that now 15 lumen per watt devices could be fabricated. A 2 feet x 2 feet OLED panel consisting of sixteen 6 inch x 6 inch high efficiency devices tiled together was then fabricated. Pictures of this panel are shown with performance metrics listed. This panel met all project objectives and was the final deliverable for the project. It is now the highest efficiency, highest lumen output, illumination-quality OLED in existence.

Anil Duggal; Don Foust; Chris Heller; Bill Nealon; Larry Turner; Joe Shiang; Nick Baynes; Tim Butler; Nalin Patel

2004-02-29T23:59:59.000Z

418

Fusion pumped light source  

DOE Patents [OSTI]

Apparatus is provided for generating energy in the form of light radiation. A fusion reactor is provided for generating a long, or continuous, pulse of high-energy neutrons. The neutron flux is coupled directly with the lasing medium. The lasing medium includes a first component selected from Group O of the periodic table of the elements and having a high inelastic scattering cross section. Gamma radiation from the inelastic scattering reactions interacts with the first component to excite the first component, which decays by photon emission at a first output wavelength. The first output wavelength may be shifted to a second output wavelength using a second liquid component responsive to the first output wavelength. The light outputs may be converted to a coherent laser output by incorporating conventional optics adjacent the laser medium.

Pappas, Daniel S. (Los Alamos, NM)

1989-01-01T23:59:59.000Z

419

Turbo-Charged Lighting Design  

E-Print Network [OSTI]

TURBO-CHARGED LIGHTING DESIGN William H. Clark II Design Engineer O'Connell Robertson & Assoc Austin/ Texas ABSTRACT The task of the lighting designer has become very complex, involving thousands of choices for fixture types and hundreds...

Clark, W. H. II

420

Faster than Light Quantum Communication  

E-Print Network [OSTI]

Faster than light communication might be possible using the collapse of the quantum wave-function without any accompanying paradoxes.

A. Y. Shiekh

2008-04-05T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Webinar: Fuel Cell Mobile Lighting  

Broader source: Energy.gov [DOE]

Video recording of the Fuel Cell Technologies Office webinar, Fuel Cell Mobile Lighting, originally presented on November 13, 2012.

422

Photodetector with enhanced light absorption  

DOE Patents [OSTI]

A photodetector including a light transmissive electrically conducting layer having a textured surface with a semiconductor body thereon. This layer traps incident light thereby enhancing the absorption of light by the semiconductor body. A photodetector comprising a textured light transmissive electrically conducting layer of SnO.sub.2 and a body of hydrogenated amorphous silicon has a conversion efficiency about fifty percent greater than that of comparative cells. The invention also includes a method of fabricating the photodetector of the invention.

Kane, James (Lawrenceville, NJ)

1985-01-01T23:59:59.000Z

423

E-Print Network 3.0 - alkynylaluminum reagents application Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and to conform to label descriptions when stored and used Summary: system is certified to ISO 9001. Pierce makes no claim of suitability for use in applications regulated......

424

Multi-fluid Modeling of Transient a Case Study in the Generation and Guiding of Light  

E-Print Network [OSTI]

Multi-fluid Modeling of Transient Plasmas: a Case Study in the Generation and Guiding of Light, B.H.P. Multi-fluid Modeling of Transient Plasmas: a Case Study in the Generation and Guid- ing . . . . . . . . . . . . . . . . . . . . . . . . 37 2.3.1 The multi-fluid description in PLASIMO . . . . . . . . . . . . . . . . 38 iii #12;iv

Eindhoven, Technische Universiteit

425

Plasmonic light yield enhancement of a liquid scintillator  

SciTech Connect (OSTI)

We demonstrate modifications to the light yield properties of an organic liquid scintillator due to the localization of the tertiary fluorophore component to the surface of Ag-core silica-shell nanoparticles. We attribute this enhancement to the near-field interaction of Ag nanoparticle plasmons with these fluor molecules. The scintillation light yield enhancement is shown to be equal to the fluorescence enhancement within measurement uncertainties. With a suitable choice of plasmon energy and scintillation fluor, this effect may be used to engineer scintillators with enhanced light yields for radiation detection applications.

Bignell, Lindsey J.; Jackson, Timothy W. [Australian Nuclear Science and Technology Organisation, Lucas Heights, New South Wales 2234 (Australia)] [Australian Nuclear Science and Technology Organisation, Lucas Heights, New South Wales 2234 (Australia); Mume, Eskender [Australian Nuclear Science and Technology Organisation, Lucas Heights, New South Wales 2234 (Australia) [Australian Nuclear Science and Technology Organisation, Lucas Heights, New South Wales 2234 (Australia); Center of Excellence in Anti-matter Matter Studies, Research School of Physics and Engineering, The Australian National University, Canberra (Australia); Lee, George P. [Department of Materials Engineering, Monash University, Melbourne (Australia)] [Department of Materials Engineering, Monash University, Melbourne (Australia)

2013-05-27T23:59:59.000Z

426

MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS  

E-Print Network [OSTI]

MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.2) #12;SECTION level of each multi-tier garage. · General lighting must have occupant sensing controls with at least one control step between 20% and 50% of design lighting power · No more than 500 watts of rated

California at Davis, University of

427

MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS  

E-Print Network [OSTI]

MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.2) #12;SECTION 5 Additions and Alterations Any alteration that increases the connected lighting load must meet all No measures required OUTDOOR LIGHTING11/20/2014 #12;SECTION 5 BACKLIGHT, UPLIGHT, AND GLARE (BUG) RATINGS

California at Davis, University of

428

MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS  

E-Print Network [OSTI]

MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.2) #12;SECTION performance in relation to lighting trespass, sky glow, and high angle brightness. This is necessary in order to reduce light pollution, which has a negative effect on wildlife and the surrounding environments

California at Davis, University of

429

Arnold Schwarzenegger, LIGHTING RESEARCH PROGRAM  

E-Print Network [OSTI]

;#12;Prepared By: Lighting Research Center Andrew Bierman, Project Lead Troy, New York 12180 Managed ByArnold Schwarzenegger, Governor LIGHTING RESEARCH PROGRAM PROJECT 3.2 ENERGY EFFICIENT LOAD- SHEDDING LIGHTING TECHNOLOGY Prepared For: California Energy Commission Public Interest Energy Research

430

STATE OF CALIFORNIA RESIDENTIAL LIGHTING  

E-Print Network [OSTI]

STATE OF CALIFORNIA RESIDENTIAL LIGHTING CEC-CF-6R-LTG-01 (Revised 08/09) CALIFORNIA ENERGY COMMISSION INSTALLATION CERTIFICATE CF-6R-LTG-01 Residential Lighting (Page 1 of 6) Site Address: Enforcement Agency: Permit Number: 2008 Residential Compliance Forms August 2009 1. Kitchen Lighting Does project

431

Job Description Job Title: Software Development Engineer  

E-Print Network [OSTI]

Tec's backend databases and applications on the cloud. · Working with the product development team, suppliers Manager, from time to time. Qualifications and Education Requirements Mandatory: A Bachelor's degree

Simmons, Craig A.

432

Pedestrian Friendly Outdoor Lighting  

SciTech Connect (OSTI)

This GATEWAY report discusses the problems of pedestrian lighting that occur with all technologies with a focus on the unique optical options and opportunities offered by LEDs through the findings from two pedestrian-focused projects, one at Stanford University in California, and one at the Chautauqua Institution in upstate New York. Incorporating user feedback this report reviews the tradeoffs that must be weighed among visual comfort, color, visibility, efficacy and other factors to stimulate discussion among specifiers, users, energy specialists, and in industry in hopes that new approaches, metrics, and standards can be developed to support pedestrian-focused communities, while reducing energy use.

Miller, Naomi J.; Koltai, Rita; McGowan, Terry

2013-12-31T23:59:59.000Z

433

Lights, Conformational Change... Action!  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 LawrenceEfeedstocksHomesLighting the

434

Lighting | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Powerstories on climateJuno Beach,October,Lighthouse Solar Jump to:Lighting Jump

435

DOE Solid-State Lighting in Higher Ed Facilities  

SciTech Connect (OSTI)

The focus of the workshop was on higher education facilities because college and university campuses are an important market for lighting products and they use almost every kind of luminaire on the market. This workshop was seen as a chance for SSL manufacturers large and small to get the inside scoop from a group of people that specify, pay for, install, use, maintain, and dispose of lighting systems for nearly every type of application. Workshop attendees explored the barriers to SSL adoption, the applications where SSL products could work better than existing technologies, and where SSL luminaires are currently falling short. This report summarizes the Workshop activities and presentation highlights.

Miller, Naomi J.; Curry, Ku'Uipo J.

2010-07-20T23:59:59.000Z

436

Plasma-based EUV light source  

DOE Patents [OSTI]

Various mechanisms are provided relating to plasma-based light source that may be used for lithography as well as other applications. For example, a device is disclosed for producing extreme ultraviolet (EUV) light based on a sheared plasma flow. The device can produce a plasma pinch that can last several orders of magnitude longer than what is typically sustained in a Z-pinch, thus enabling the device to provide more power output than what has been hitherto predicted in theory or attained in practice. Such power output may be used in a lithography system for manufacturing integrated circuits, enabling the use of EUV wavelengths on the order of about 13.5 nm. Lastly, the process of manufacturing such a plasma pinch is discussed, where the process includes providing a sheared flow of plasma in order to stabilize it for long periods of time.

Shumlak, Uri (Seattle, WA); Golingo, Raymond (Seattle, WA); Nelson, Brian A. (Mountlake Terrace, WA)

2010-11-02T23:59:59.000Z

437

Mobility chains analysis of technologies for passenger cars and light duty vehicles fueled with biofuels : application of the Greet model to project the role of biomass in America's energy future (RBAEF) project.  

SciTech Connect (OSTI)

The Role of Biomass in America's Energy Future (RBAEF) is a multi-institution, multiple-sponsor research project. The primary focus of the project is to analyze and assess the potential of transportation fuels derived from cellulosic biomass in the years 2015 to 2030. For this project, researchers at Dartmouth College and Princeton University designed and simulated an advanced fermentation process to produce fuel ethanol/protein, a thermochemical process to produce Fischer-Tropsch diesel (FTD) and dimethyl ether (DME), and a combined heat and power plant to co-produce steam and electricity using the ASPEN Plus{trademark} model. With support from the U.S. Department of Energy (DOE), Argonne National Laboratory (ANL) conducted, for the RBAEF project, a mobility chains or well-to-wheels (WTW) analysis using the Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model developed at ANL. The mobility chains analysis was intended to estimate the energy consumption and emissions associated with the use of different production biofuels in light-duty vehicle technologies.

Wu, M.; Wu, Y.; Wang, M; Energy Systems

2008-01-31T23:59:59.000Z

438

Ecological Consequences of Artificial Night Lighting  

E-Print Network [OSTI]

of Artificial Night Lighting Catherine Rich and Travisof artificial night lighting. This book provides editedage of modern urban lighting was ushered in. Coincidentally,

Piselli, Kathy

2006-01-01T23:59:59.000Z

439

LIGHTING CONTROLS: SURVEY OF MARKET POTENTIAL  

E-Print Network [OSTI]

REFERENCES Task Report to Lighting Systems Research,Berkeley Laboratory, "Lighting Control System Market1980). Task Report to Lighting Systems Research, Lawrence

Verderber, R.R.

2010-01-01T23:59:59.000Z

440

Demand Responsive Lighting: A Scoping Study  

E-Print Network [OSTI]

3 3.0 Previous Experience with Demand Responsive Lighting11 4.3. Prevalence of Lighting13 4.4. Impact of Title 24 on Lighting

Rubinstein, Francis; Kiliccote, Sila

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Municipal Consortium LED Street Lighting Workshop Presentations...  

Broader source: Energy.gov (indexed) [DOE]

A Rational View of LM-79 Reports, IES Files, and Product Variation Gary Steinberg, GE Lighting Solutions Solid-State Street Lighting: Calculating Light Loss Factors Dana Beckwith,...

442

Municipal Consortium LED Street Lighting Workshop Presentations...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

National Association of Energy Services Companies Calculating Light Loss Factors for Solid-State Lighting Systems Chad Stalker, Philips Lumileds Lighting Intro to MSSLC's...

443

Sandia National Laboratories: Light Creation Materials  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

TechnologiesLight Creation Materials Light Creation Materials Overview of SSL Light Creation Materials Different families of inorganic semiconductor materials can...

444

Photon echo studies of photosynthetic light harvesting  

E-Print Network [OSTI]

of the B800-B820 light-harvesting complex. Proc Natl Acadphotosynthetic light harvesting Elizabeth L. Read Æ Hohjaitransfer events in light harvesting. Here, we outline the

Read, Elizabeth L.; Lee, Hohjai; Fleming, Graham R.

2009-01-01T23:59:59.000Z

445

Sandia National Laboratories: Light Creation Materials  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

EFRCOverviewLight Creation Materials Light Creation Materials Overview of SSL Light Creation Materials Different families of inorganic semiconductor materials can contribute to...

446

Collective phase description of oscillatory convection  

SciTech Connect (OSTI)

We formulate a theory for the collective phase description of oscillatory convection in Hele-Shaw cells. It enables us to describe the dynamics of the oscillatory convection by a single degree of freedom which we call the collective phase. The theory can be considered as a phase reduction method for limit-cycle solutions in infinite-dimensional dynamical systems, namely, stable time-periodic solutions to partial differential equations, representing the oscillatory convection. We derive the phase sensitivity function, which quantifies the phase response of the oscillatory convection to weak perturbations applied at each spatial point, and analyze the phase synchronization between two weakly coupled Hele-Shaw cells exhibiting oscillatory convection on the basis of the derived phase equations.

Kawamura, Yoji, E-mail: ykawamura@jamstec.go.jp [Institute for Research on Earth Evolution, Japan Agency for Marine-Earth Science and Technology, Yokohama 236-0001 (Japan)] [Institute for Research on Earth Evolution, Japan Agency for Marine-Earth Science and Technology, Yokohama 236-0001 (Japan); Nakao, Hiroya [Department of Mechanical and Environmental Informatics, Tokyo Institute of Technology, Tokyo 152-8552 (Japan)] [Department of Mechanical and Environmental Informatics, Tokyo Institute of Technology, Tokyo 152-8552 (Japan)

2013-12-15T23:59:59.000Z

447

Wigner-function description of EPR experiment  

E-Print Network [OSTI]

We provide a detailed description of the EPR paradox (in the Bohm version) for a two qubit-state in the discrete Wigner function formalism. We compare the probability distributions for two qubit relevant to simultaneously-measurable observables (computed from the Wigner function) with the probability distributions representing two perfectly-correlated classic particles in a discrete phase-space. We write in both cases the updating formulae after a measure, thus obtaining a mathematical definition of \\textit{classic collapse} and \\textit{quantum collapse}. We study, with the EPR experiment, the joint probability distributions of Alice's and Bob's qubit before and after the measure, analyzing the non-local effects. In particular, we give a more precise definition of locality, which we call m-locality: we show that quantum systems may violate this kind of locality, thus preserving, in an EPR-like argument, the completeness of Quantum Mechanics.

Riccardo Franco

2007-01-12T23:59:59.000Z

448

Applications of Continuum Shell Model  

E-Print Network [OSTI]

The nuclear many-body problem at the limits of stability is considered in the framework of the Continuum Shell Model that allows a unified description of intrinsic structure and reactions. Technical details behind the method are highlighted and practical applications combining the reaction and structure pictures are presented.

Alexander Volya

2006-05-16T23:59:59.000Z

449

The solid state lighting initiative: An industry/DOE collaborativeeffort  

SciTech Connect (OSTI)

A new era of technology is emerging in lighting. It is being propelled by the dramatic improvements in performance of solid state light sources. These sources offer an entirely new array of design aspects not achievable with current light sources. At the same time, their performance characteristics continue to improve and are expected to eclipse those of the most common light sources within the near future. High efficiency is one of these performance attributes motivating the Department of Energy (DOE) to work with the manufacturers of this new technology to create a program plan sufficiently comprehensive to support an industry-driven Solid State Lighting Initiative before Congress. The purpose of the initiative is to educate Congress about the potential of this technology to reduce the electric lighting load within the United States and, consequently, to realize the associated environmental benefits. The initiative will solicit congressional support to accelerate the development of solid state technology through investment in the research and development necessary to overcome the technical barriers that currently limit the products to niche markets. While there are multiple technologies being developed as solid state light sources, the two technologies which hold the most promise for application to general illumination are Light Emitting Diodes (LEDs) and Organic Light Emitting Diodes (OLEDs). The form of these sources can be quite different from current sources, allowing exciting new design uses for the products. Being diffuse sources, OLEDs are much lower in intensity per unit area than LEDs. The manufacturing process for OLEDs lends itself to shapes that can be formed to different geometries, making possible luminous panels or flexible luminous materials. Conversely, LEDs are very intense point sources which can be integrated into a small space to create an intense source or used separately for less focused applications. Both OLED and LED sources are expected to be thinner than other comparable sources; this thinness offers additional design opportunities.

Johnson, Steve

2000-10-01T23:59:59.000Z

450

Environmental Compliance and Protection Program Description Oak Ridge, Tennessee  

SciTech Connect (OSTI)

The objective of the Environmental Compliance and Protection (EC and P) Program Description (PD) is to establish minimum environmental compliance requirements and natural resources protection goals for the Bechtel Jacobs Company LLC (BJC) Oak Ridge Environmental Management Cleanup Contract (EMCC) Contract Number DE-AC05-98OR22700-M198. This PD establishes the work practices necessary to ensure protection of the environment during the performance of EMCC work activities on the US Department of Energy's (DOE's) Oak Ridge Reservation (ORR) in Oak Ridge, Tennessee, by BJC employees and subcontractor personnel. Both BJC and subcontractor personnel are required to implement this PD. A majority of the decontamination and demolition (D and D) activities and media (e.g., soil and groundwater) remediation response actions at DOE sites on the ORR are conducted under the authority of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). CERCLA activities are governed by individual CERCLA decision documents (e.g., Record of Decision [ROD] or Action Memorandum) and according to requirements stated in the Federal Facility Agreement for the Oak Ridge Reservation (DOE 1992). Applicable or relevant and appropriate requirements (ARARs) for the selected remedy are the requirements for environmental remediation responses (e.g., removal actions and remedial actions) conducted under CERCLA.

Bechtel Jacobs

2009-02-26T23:59:59.000Z

451

Light modulating device  

DOE Patents [OSTI]

In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity.

Rauh, R. David (Newton, MA); Goldner, Ronald B. (Lexington, MA)

1989-01-01T23:59:59.000Z

452

Light modulating device  

DOE Patents [OSTI]

In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity are disclosed. 1 fig.

Rauh, R.D.; Goldner, R.B.

1989-12-26T23:59:59.000Z

453

Energy and lighting  

SciTech Connect (OSTI)

Advances in research for new types of lighting with increased efficacies (lumens/watt) are discussed in the following areas: (1) high-frequency, solid-state ballasts, (2) isotopic enhancement of mercury isotopes, (3) magnetic augmentation, (4) electrodeless, ultra-high frequency, (5) tuned phosphors, (6) two-photon phosphors, (7) heat mirrors, and (3) advanced control circuits to take advantage of daylight and occupancy. As of 1985, improvements in efficacy have been accomplished on an economic basis to save energy for (1) high-frequency ballasts (25%), (2) isotopic enhancement (5%), and (8) advanced control circuits (up to 50%). Most of these advances depend on a deeper understanding of the weakly ionized plasma as a radiating and diffusing medium. 3 figures, 4 tables.

Berman, S.

1985-01-01T23:59:59.000Z

454

Cost effective lighting  

SciTech Connect (OSTI)

Long-life replacement lamps for the incandescent lamp have been evaluated with regard to their cost effectiveness. The replacements include the use of energy buttons that extend lamp life as well as an adaptive fluorescent circline lamp that will fit into existing incandescent lamp sockets. The initial, operating, and replacement costs for one million lumen-hours are determined for each lamp system. We find the most important lighting cost component is the operating cost. Using lamps that are less efficient or devices that cause lamps to operate less efficiently are not cost-effective. The adaptive fluorescent circline lamp, even at an initial cost of $15.00, is the most cost effective source of illumination compared to the incandescent lamp and lamp systems examined. 3 refs., 6 tabs.

Morse, O.; Verderber, R.

1987-07-01T23:59:59.000Z

455

Creative and Constructive Play with Light  

E-Print Network [OSTI]

children identify objects with these properties. Predict what materials light will pass through. Use paint and mixing light. Mixing paint creates a muddy brown or black. Mixing light creates white light

456

A STATE VARIABLE DESCRIPTION OF THE RHIC RF CONTROL LOOPS.  

SciTech Connect (OSTI)

The beam transfer function changes during the RHIC ramp. The response of the RF control loops changes as a result. A state-variable description of the beam and the RF control loops was developed. This description was used to generate a set of feedback matrices that keeps the response of the RF control loops constant during the ramp. This paper describes the state-variable description and its use in determining the K matrices.

SCHULTHEISS,C.; BRENNAN,J.M.

2002-06-02T23:59:59.000Z

457

Probing light polarization with the quantum Chernoff bound  

SciTech Connect (OSTI)

We recall the framework of a consistent quantum description of polarization of light. Accordingly, the degree of polarization of a two-mode state {rho} of the quantum radiation field can be defined as a distance of a related state {rho}{sub b} to the convex set of all SU(2)-invariant two-mode states. We explore a distance-type polarization measure in terms of the quantum Chernoff bound and derive its explicit expression. A comparison between the Chernoff and Bures degrees of polarization leads to interesting conclusions for some particular states chosen as illustrative examples.

Ghiu, Iulia; Marian, Tudor A. [Centre for Advanced Quantum Physics, Department of Physics, University of Bucharest, P.O. Box MG-11, R-077125 Bucharest-Magurele (Romania); Bjoerk, Gunnar [School of Information and Communication Technology, Royal Institute of Technology (KTH), Electrum 229, SE-164 40 Kista (Sweden); Marian, Paulina [Centre for Advanced Quantum Physics, Department of Physics, University of Bucharest, P.O. Box MG-11, R-077125 Bucharest-Magurele (Romania); Department of Chemistry, University of Bucharest, Boulevard Regina Elisabeta 4-12, R-030018 Bucharest (Romania)

2010-08-15T23:59:59.000Z

458

4.2: Design of an Improved Pixel for a Polysilicon Active Matrix Organic Light Emitting Diode Display  

E-Print Network [OSTI]

4.2: Design of an Improved Pixel for a Polysilicon Active Matrix Organic Light Emitting Diode active matrix organic light emitting diode (AMOLED) pixel with high pixel to pixel luminance uniformity such as organic light emitting diodes (OLEDs) are presently of great interest due to their potential application

459

Embodied Energy and Off-Grid Lighting  

E-Print Network [OSTI]

as a point of comparison with LED lighting product embodieda fairer comparison between off- grid LED lighting and other

Alstone, Peter

2012-01-01T23:59:59.000Z

460

Overcoming Common Pitfalls: Energy Efficient Lighting Projects...  

Broader source: Energy.gov (indexed) [DOE]

Overcoming Common Pitfalls: Energy Efficient Lighting Projects Overcoming Common Pitfalls: Energy Efficient Lighting Projects Transcript Presentation More Documents & Publications...

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Bell tests with photon-entanglement: LHV models and critical efficiencies at the light of Wigner-PDC optics  

E-Print Network [OSTI]

Within the Wigner-PDC picture of photon entanglement, detection "errors" are not independent (though they may look, on average), nor can they be controlled by means of a technological improvement on the detectors. Those two elements make possible the interpretation of experimental evidence without the need to exclude local realism: for that reason, we propose the abandonment of the usual (photon, particle-based) description of (PDC-generated) light states, in favour of an also quantum, but field-theoretical description (QED), a description that finds a one-to-one equivalent in the Wigner-PDC approach we have advocated in recent posts.

Rodriguez, David

2011-01-01T23:59:59.000Z

462

Bell tests with photon-entanglement: LHV models and critical efficiencies at the light of Wigner-PDC optics  

E-Print Network [OSTI]

Within the Wigner-PDC picture of photon entanglement, detection "errors" are not independent (though they may look, on average), nor can they be controlled by means of a technological improvement on the detectors. Those two elements make possible the interpretation of experimental evidence without the need to exclude local realism: for that reason, we propose the abandonment of the usual (photon, particle-based) description of (PDC-generated) light states, in favour of an also quantum, but field-theoretical description (QED), a description that finds a one-to-one equivalent in the Wigner-PDC approach we have advocated in recent posts.

David Rodriguez

2011-12-15T23:59:59.000Z

463

Laser remote sensing of backscattered light from a target sample  

DOE Patents [OSTI]

A laser remote sensing apparatus comprises a laser to provide collimated excitation light at a wavelength; a sensing optic, comprising at least one optical element having a front receiving surface to focus the received excitation light onto a back surface comprising a target sample and wherein the target sample emits a return light signal that is recollimated by the front receiving surface; a telescope for collecting the recollimated return light signal from the sensing optic; and a detector for detecting and spectrally resolving the return light signal. The back surface further can comprise a substrate that absorbs the target sample from an environment. For example the substrate can be a SERS substrate comprising a roughened metal surface. The return light signal can be a surface-enhanced Raman signal or laser-induced fluorescence signal. For fluorescence applications, the return signal can be enhanced by about 10.sup.5, solely due to recollimation of the fluorescence return signal. For SERS applications, the return signal can be enhanced by 10.sup.9 or more, due both to recollimation and to structuring of the SERS substrate so that the incident laser and Raman scattered fields are in resonance with the surface plasmons of the SERS substrate.

Sweatt, William C. (Albuquerque, NM); Williams, John D. (Albuquerque, NM)

2008-02-26T23:59:59.000Z

464

Solid State Lighting Program  

SciTech Connect (OSTI)

The project had two main tasks: One addressed the materials and device development and it was carried out at Boston University. The second addressed the theory and simulation of materials and devices and it was carried out at Science Application International Corporation (SAIC). Each task had a number of sub-tasks which are described in the following table. Progress in these tasks is described in this section.

Theodore D. Moustakas

2007-11-30T23:59:59.000Z

465

Automatic Mechetronic Wheel Light Device  

DOE Patents [OSTI]

A wheel lighting device for illuminating a wheel of a vehicle to increase safety and enhance aesthetics. The device produces the appearance of a "ring of light" on a vehicle's wheels as the vehicle moves. The "ring of light" can automatically change in color and/or brightness according to a vehicle's speed, acceleration, jerk, selection of transmission gears, and/or engine speed. The device provides auxiliary indicator lights by producing light in conjunction with a vehicle's turn signals, hazard lights, alarm systems, and etc. The device comprises a combination of mechanical and electronic components and can be placed on the outer or inner surface of a wheel or made integral to a wheel or wheel cover. The device can be configured for all vehicle types, and is electrically powered by a vehicle's electrical system and/or battery.

Khan, Mohammed John Fitzgerald (Silver Spring, MD)

2004-09-14T23:59:59.000Z

466

assurance program description: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

workforce at LANL. DataImpacts LANL Funding: These Postdocs are paid from programmatic funding within 2 Program Description Queen's University Computer Technologies and...

467

STEP Energy Coach and Technical Consultant Job Descriptions ...  

Energy Savers [EERE]

Consultant Job Descriptions.pdf More Documents & Publications Technical Consultant RFP Tool Kit Framework: Small Town University Energy Program (STEP) Technical Consultant...

468

E-Print Network 3.0 - approximation descriptions microscopiques...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

de l'approximation locale. Ce calcul est entirement... :lpmmc.grenoble.cnrs.frspip.php?article404 Description : Les polaritons de cavit sont des quasiparticules hybrides...

469

June 1998Program Description Windows and Daylighting Group  

E-Print Network [OSTI]

June 1998Program Description THERM 2.0 Windows and Daylighting Group Building Technologies, and Dariush Arasteh Windows and Daylighting Group Building Technologies Department Environmental Energy

470

Community College Institute (CCI) Program Description The Community...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Community College Institute (CCI) Program Description The Community College Internship (CCI) program seeks to encourage community college students to enter technical careers...

471

New Mexico Hydrogen Fuels Challenge Program Description The New...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

New Mexico Hydrogen Fuels Challenge Program Description The New Mexico Hydrogen Fuels Challenge is an event that provides a hands-on opportunity for middle school students (grades...

472

Sowmya Sampath Motivation and Project Description  

E-Print Network [OSTI]

as a REST API Bing Social No Yes No No Threadsy Yes (separately) Yes No No Facebook to Twitter Yes Yes and Twitter with a single click. Publishes an web service API that helps further integrations with otherComments() -publishAPI() - ... #12; Configuration and Initial Settings OneSocial Application is created in Facebook

Pollett, Chris

473

Course Description Grid Computing, NGSSC, 2p  

E-Print Network [OSTI]

: Application projects, software development projects, political and administrative aspects on grids, emerging grid standards (OGSA/OGSI), etc. ­ Foundations in algorithm and software development for grids. · Grid issues. ­ Sample grid middleware packages, software tools, and problem solv- ing environments for grids

Elmroth, Erik

474

AHTR Refueling Systems and Process Description  

SciTech Connect (OSTI)

The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt–cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy’s Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published [1], and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the levels of maturity of the various SSCs to provide guidance for future technology developments. The conceptual design information presented in this report is very preliminary in nature. Significant uncertainty remains about several aspects of the process and even the radiation and mechanical performance of plate-type coated-particle fuel.

Varma, V.K.; Holcomb, D.E.; Bradley, E.C.; Zaharia, N.M.; Cooper, E.J.

2012-07-15T23:59:59.000Z

475

AHTR Refueling Systems and Process Description  

SciTech Connect (OSTI)

The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt-cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy's Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the levels of maturity of the various SSCs to provide guidance for future technology developments. The conceptual design information presented in this report is very preliminary in nature. Significant uncertainty remains about several aspects of the process and even the radiation and mechanical performance of plate-type coated-particle fuel.

Varma, Venugopal Koikal [ORNL; Holcomb, David Eugene [ORNL; Bradley, Eric Craig [ORNL; Zaharia, Nathaniel M [ORNL; Cooper, Eliott J [ORNL

2012-07-01T23:59:59.000Z

476

applications thin film: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Nikolay 27 Solvent-enhanced dye diffusion in polymer thin films for polymer light-emitting diode application Engineering Websites Summary: Solvent-enhanced dye diffusion in...

477

Application for Presidential Permit OE Docket No. PP-059 Central...  

Broader source: Energy.gov (indexed) [DOE]

transmission facilities at the U.S. - Mexico Border Application for Presidential Permit OE Docket No. PP-59 Central Power and Light Company (CPL) More Documents &...

478

Utility lighting summit proves illuminating  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Utility-lighting-summit-proves-illuminating Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects & Initiatives Expand Projects...

479

Photonic crystal light emitting diode.  

E-Print Network [OSTI]

?? This master's thesis describe electromagnetic simulations of a gallium antimonide (GaSb) light emitting diode, LED. A problem for such devices is that most of… (more)

Leirset, Erlend

2010-01-01T23:59:59.000Z

480

Linac Coherent Light Source Overview  

ScienceCinema (OSTI)

Take an animated tour of the Linac Coherent Light Source (LCLS). Follow the laser pulse from the injector gun all the way through to the Far Experimental Hall.

None

2013-05-29T23:59:59.000Z

Note: This page contains sample records for the topic "lighting description applicability" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Light Water Reactor Sustainability Newsletter  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and nuclear waste disposal. Dr. Corradini has extensive research experience in the phenomenology of beyond design basis Meet the New LWRS Program Pathway Lead accidents in light...

482

LED Lighting Off the Grid  

Energy Savers [EERE]

D. & Kammen, D. M. Decentralized energy systems for clean electricity access. Nature Climate Change accepted, in press, (2015). Off-Grid Status Quo : Fuel Based Lighting...

483

Pedestrian-Friendly Nighttime Lighting  

Broader source: Energy.gov [DOE]

This November 19, 2013 webinar presented issues and considerations related to pedestrian-friendly nighttime lighting, such as color rendering, safety, and adaptation. When it comes to outdoor...

484

Light Water Reactor Sustainability Newsletter  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

hydraulics software RELAP-7 (which is under development in the Light Water Reactor Sustainability LWRS Program). A novel interaction between the probabilistic part (i.e., RAVEN)...

485

Light Water Reactor Sustainability Newsletter  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

30-35, August 2012. Clayton, D. A. and M. S. Hileman, 2012, Light Water Reactor Sustainability Non-Destructive Evaluation for Concrete Research and Development Roadmap, ORNLTM-...

486

Linac Coherent Light Source Overview  

Broader source: Energy.gov [DOE]

Take an animated tour of the Linac Coherent Light Source (LCLS). Follow the laser pulse from the injector gun all the way through to the Far Experimental Hall.

487

Lighting with Paint FABIO PELLACINI  

E-Print Network [OSTI]

Lighting with Paint FABIO PELLACINI Dartmouth College and FRANK BATTAGLIA, R. KEITH MORLEY, animation, rendering, optimization, painting ACM Reference Format: Pellacini, F., Battaglia, F., Morley, R

Pellacini, Fabio

488

Light Emission of Argon Discharges: Importance of Heavy Particle Processes  

SciTech Connect (OSTI)

Simulation studies on argon glow discharges established between flat disc electrodes, at pressure x electrode separation (pd) of 45 Pa cm are reported, with special attention to heavy-particle processes including excitation-induced light emission. The discharges are investigated through self-consistent hybrid modelling, consisting of a fluid description for components near local hydrodynamic equilibrium (slow electrons and ions), and Monte Carlo treatment of energetic electrons and heavy particles (ions and neutral atoms). The light emission profiles are analyzed for a wide range of operating conditions. The numerical results for the relative intensities and the shapes of the negative glow (created by electron impact excitation) and the cathode glow (created by heavy particle impact excitation) are in good agreement with experimental data obtained by Maric et al.

Hartmann, Peter [Research Institute for Solid State Physics and Optics, Hungarian Academy of Sciences, POB 49, H-1525 Budapest (Hungary)

2004-12-01T23:59:59.000Z

489

Controlling Light to Make the Most Energy From the Sun  

SciTech Connect (OSTI)

Representing the Light-Material Interactions in Energy Conversion (LMI), this document is one of the entries in the Ten Hundred and One Word Challenge. As part of the challenge, the 46 Energy Frontier Research Centers were invited to represent their science in images, cartoons, photos, words and original paintings, but any descriptions or words could only use the 1000 most commonly used words in the English language, with the addition of one word important to each of the EFRCs and the mission of DOE energy. The mission of LMI to tailor the morphology, complex dielectric structure, and electronic properties of matter so as to sculpt the flow of sunlight and heat, enabling light conversion to electrical and chemical energy with unprecedented efficiency.

Callahan, Dennis; Corcoran, Chris; Eisler, Carissa; Flowers, Cris; Goodman, Matt; Hofmann, Carrie; Sadtler, Bryce

2013-07-18T23:59:59.000Z

490

Photonic Crystals: Enhancing the Light Output of Scintillation Based Detectors  

E-Print Network [OSTI]

A scintillator is a material which emits light when excited by ionizing radiation. Such materials are used in a diverse range of applications; From high energy particle physics experiments, X-ray security, to nuclear cameras or positron emission tomography. Future high-energy physics (HEP) experiments as well as next generation medical imaging applications are more and more pushing towards better scintillation characteristics. One of the problems in heavy scintillating materials is related to their high index of refraction. As a consequence, most of the scintillation light produced in the bulk material is trapped inside the crystal due to total internal reflection. The same problem also occurs with light emitting diodes (LEDs) and has for a long time been considered as a limiting factor for their overall efficiency. Recent developments in the area of nanophotonics were showing now that those limitations can be overcome by introducing a photonic crystal (PhC) slab at the outcoupling surface of the substrate. P...

Knapitsch, Arno Richard

491

Ceramic corrosion/erosion project description  

SciTech Connect (OSTI)

As a part of the United States Department of Energy's High Temperature Turbine Technology Program, the Morgantown Energy Technology Center is participating in a Ceramics Corrosion/Erosion Materials Study. Objective is to create a technology base for ceramic materials which could be used by stationary gas power turbines operating with a high-temperature, coal-derived, low-Btu gas products of combustion environment. Two facilities are designed and installed to burn a varying low-Btu coal-derived gas in a controlled manner. This report contains the objectives and testing philosophy as well as the operating, specimen handling, and emergency procedures for the facilities. The facilities were checked out in August/September 1980. Testing is scheduled to begin in late 1980 with completion of 1000 hours of ceramic materials exposure to be completed by early 1981. Most of the enclosed is an update of two METC Information Releases (IR), i.e., IR 442 (1979) Test Plan for Ceramic Corrosion/Erosion Project, and IR 817 (1980) Ceramic Corrosion/Erosion Project Description.

Nakaishi, C.V.; Carpenter, L.K.

1981-02-01T23:59:59.000Z

492

Theoretical descriptions of neutron emission in fission  

SciTech Connect (OSTI)

Brief descriptions are given of the observables in neutron emission in fission together with early theoretical representations of two of these observables, namely, the prompt fission neutron spectrum N(E) and the average prompt neutron multiplicity {bar {nu}}{sub p}. This is followed by summaries, together with examples, of modern approaches to the calculation of these two quantities. Here, emphasis is placed upon the predictability and accuracy of the new approaches. In particular, the dependencies of N(E) and {bar {nu}}{sub p} upon the fissioning nucleus and its excitation energy are discussed. Then, recent work in multiple-chance fission and other recent work involving new measurements are presented and discussed. Following this, some properties of fission fragments are mentioned that must be better known and better understood in order to calculate N(E) and {bar {nu}}{sub p} with higher accuracy than is currently possible. In conclusion, some measurements are recommended for the purpose of benchmarking simultaneous calculations of neutron emission and gamma emission in fission. 32 refs., 26 figs.

Madland, D.G.

1990-01-01T23:59:59.000Z

493

Transmutation Fuel Campaign Description and Status  

SciTech Connect (OSTI)

This report contains a technical summary package in response to a Level 2 milestone in the transmutation fuel campaign (TFC) management work-package calling for input to the Secretarial decision. At present, the form of the Secretarial decision package is not fully defined, and it is not clear exactly what will be required from the TFC as a final input. However, it is anticipated that a series oftechnical and programmatic documents will need to be provided in support of a wider encompassing document on GNEP technology development activities. The TFC technical leadership team provides this report as initial input to the secretarial decision package which is being developed by the Technical Integration Office (TIO) in support of Secretarial decision. This report contains a summary of the TFC execution plan with a work breakdown structure, highlevel schedule, major milestones, and summary description of critical activities in support of campaign objectives. Supporting documents referenced in this report but provided under separate cover include: • An updated review of the state-of-the art for transmutation fuel development activities considering national as well as international fuel research and development testing activities. • A definition of the Technology Readiness Level (TRL) used to systematically define and execute the transmutation fuel development activities.

Jon Carmack; Kemal O. Pasamehmetoglu

2008-01-01T23:59:59.000Z

494

Symplectic map description of Halley's comet dynamics  

E-Print Network [OSTI]

The main features of 1P/Halley chaotic dynamics can be described by a two dimensional symplectic map. Using Mel'nikov integral we semi-analytically determine such a map for 1P/Halley taking into account gravitational interactions from the Sun and the eight planets. We determine the Solar system kick function ie the energy transfer to 1P/Halley along one passage through the Solar system. Our procedure allows to compute for each planet its contribution to the Solar system kick function which appears to be the sum of the Keplerian potential of the planet and of a rotating circular gravitational dipole potential due to the Sun movement around Solar system barycenter. We test the robustness of the symplectic Halley map by directly integrating Newton's equations over $\\sim 2.4\\cdot 10^4$ yr around Y2K and by reconstructing the Solar system kick function. Our results show that the Halley map with fixed parameters gives a reliable description of comet dynamics on time scales of $10^4$ yr while on a larger scales the parameters of the map are slowly changing due to slow oscillations of orbital momentum.

G. Rollin; P. Haag; J. Lages

2015-02-02T23:59:59.000Z

495

Broadband dye-sensitized upconversion of near-infrared light  

E-Print Network [OSTI]

Broadband dye-sensitized upconversion of near-infrared light Wenqiang Zou1 , Cindy Visser1-junction solar cell. However, the practical applicability of the most efficient known upconversion materials by the dye-sensitized nanoparticles is dramatically enhanced (by a factor of 3,300) as a result of increased

496

Probing the Type Ia environment with Light Echoes  

E-Print Network [OSTI]

In general, Light Echoes (LE) are beautiful, rather academical and therefore unavoidably useless phenomena. In some cases, however, they can give interesting information about the environment surrounding the exploding star. After giving a brief introduction to the subject, I describe its application to the case of Type Ia Supernovae and discuss the implications for progenitors and their location within the host galaxies.

F. Patat

2004-11-19T23:59:59.000Z

497

STABILITY PROPERTIES OF LIGHT PROPAGATING IN FIBER OPTICS  

E-Print Network [OSTI]

STABILITY PROPERTIES OF LIGHT PROPAGATING IN FIBER OPTICS ST´EPHANE LAFORTUNE Summary The study is crucial in applications such as lasers and optical fibers. In this proposal I will focus on a model of fiber optics: the Manakov system. This system consists of two differential equations, that is two

Kasman, Alex

498

Shining Light in Dark Places: Understanding the Tor Network  

E-Print Network [OSTI]

Shining Light in Dark Places: Understanding the Tor Network Damon McCoy1 , Kevin Bauer1 , Dirk-used? (3) Who is using Tor? To sample the results, we show that web traffic makes up the ma- jority latency and high throughput, it is ideal for interac- tive applications such as web browsing, file sharing

499

EK101 Engineering Light Project: Evaluate Residential Lighting  

E-Print Network [OSTI]

for residential lighting (LED, Compact Fluorescent, Incandescent). Develop a plan of experiments to be conducted, CF, and Incandescent bulbs for the past ten years. (try the wayback time machine if other sources fail). Discuss the key challenges associated with a transition from incandescent lighting

Bifano, Thomas

500

Nittany Lights Landscape Lighting Sept. 28-30, 2012  

E-Print Network [OSTI]

Nittany Lights ­ Landscape Lighting Workshop Sept. 28-30, 2012 Penn State Campus - University Park with a lecture at the Palmer Art Museum to be provided by internationally known architectural/landscape artist get a chance to think beyond budgets, maintenance, codes, etc and get back to the fun creative side