National Library of Energy BETA

Sample records for lighting automated shading

  1. A Post-Occupancy Monitored Evaluation of the Dimmable Lighting, Automated Shading, and Underfloor Air Distribution System in The New York Times Building

    E-Print Network [OSTI]

    2013-01-01

    15 4.1. LightingEvaluation of the Dimmable Lighting, Automated Shading, andcomparison EUI, kBtu/Gsf Lighting Heating Cooling Pumps/C

  2. Integrating automated shading and smart glazings with daylight controls

    E-Print Network [OSTI]

    Selkowitz, Stephen; Lee, Eleanor

    2004-01-01

    Automated Shading and Smart Glazings with Daylight Controlsdaylighting, controls, smart glazing, shading, fielddeveloping switchable “smart glazings” for over a decade and

  3. A Post-Occupancy Monitored Evaluation of the Dimmable Lighting, Automated Shading, and Underfloor Air Distribution System in The New York Times Building

    E-Print Network [OSTI]

    2013-01-01

    with an installed lighting power density of 1.3 W/ft 2 andmaximum installed lighting power density (LPD) specified byASHRAE 90.1-2001 Lighting power density 1.3 W/ft Work plane

  4. A Post-Occupancy Monitored Evaluation of the Dimmable Lighting, Automated Shading, and Underfloor Air Distribution System in The New York Times Building

    E-Print Network [OSTI]

    2013-01-01

    =5.5 (designed for single floor) Heating Sizing Heating from110°F) due to heating from floor Minimum volume set at 5% tofloor) ASHRAE 90.1-2001 Lighting Equipment (plug loads) Fans Pumps/Cooling tower Cooling Fan powered boxes Total (kWh/ft -yr) Heating

  5. Highly Insulating Residential Windows Using Smart Automated Shading...

    Broader source: Energy.gov (indexed) [DOE]

    Smart Window with integrated sensors, control logic and a motorized shade between glass panes. Image: Lawrence Berkeley National Laboratory 2 of 3 Residential Smart Window...

  6. Highly insulating Residential Windows Using Smart Automated Shading

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to utility meter, home automation, thermostat, internet data, etc Pella Windows Target MarketAudience: Initial design is focused on window manufacturers targeting residential,...

  7. Solar Census - Perfecting the Art of Automated, Remote Solar Shading Assessments (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-04-01

    To validate the work completed by Solar Census as part of the Department of Energy SunShot Incubator 8 award, NREL validated the performanec of the Solar Census Surveyor tool against the industry standard Solmetric SunEye measurements for 4 residential sites in California who experienced light to heavy shading. Using the a two one-sided test (TOST) of statistical equivalence, NREL found that the mean differences between the Solar Census and SunEye mean solar access values for Annual, Summer, and Winter readings fall within the 95% confidence intervals and the confidence intervals themselves fall within the tolerances of +/- 5 SAVs, the Solar Census calculations are statistically equivalent to the SunEye measurements.

  8. Table lamp with dynamically controlled lighting distribution and uniformly illuminated luminous shade

    DOE Patents [OSTI]

    Siminovitch, Michael J. (Pinole, CA); Page, Erik R. (Berkeley, CA)

    2002-01-01

    A double lamp table or floor lamp lighting system has a pair of compact fluorescent lamps (CFLs) or other lamps arranged vertically, i.e. one lamp above the other, with a reflective septum in between. By selectively turning on one or both of the CFLs, down lighting, up lighting, or both up and down lighting is produced. The control system can also vary the light intensity from each CFL. The reflective septum ensures that almost all the light produced by each lamp will be directed into the desired light distribution pattern which is selected and easily changed by the user. In a particular configuration, the reflective septum is bowl shaped, with the upper CFL sitting in the bowl, and a luminous shade hanging down from the bowl. The lower CFL provides both task lighting and uniform shade luminance. Planar compact fluorescent lamps, e.g. circular CFLs, particularly oriented horizontally, are preferable. CFLs provide energy efficiency. However, other types of lamps, including incandescent, halogen, and LEDs can also be used in the fixture. The lighting system may be designed for the home, hospitality, office or other environments.

  9. Daylighting and solar shading performances of an innovative automated reflective louver system

    E-Print Network [OSTI]

    Hashemi, Arman

    2014-08-07

    follows initial investigations into the design and applicability of an automated retrofitted panel thermal shutters which can also act as a sunshade and daylighting system. The system has a patented function which allows each shutter...

  10. Monitored lighting energy savings from dimmable lighting controls in The New York Times Headquarters Building

    E-Print Network [OSTI]

    Fernandes, Luis L.

    2014-01-01

    A. , D’Herdt, P. , 2008, Lighting energy savings in officesLux Europa, 11 th European Lighting Conference, Istanbul,evaluation of the dimmable lighting, automated shading, and

  11. International Symposium on Daylighting Buildings (IEA SHC TASK 31) Integrating Automated Shading and Smart Glazings with Daylight

    E-Print Network [OSTI]

    and Smart Glazings with Daylight Controls Stephen Selkowitz Eleanor Lee Lawrence Berkeley National Laboratory Keywords: daylighting, controls, smart glazing, shading, field testing, IEA31 1. INTRODUCTION Most

  12. The lightspeed automatic interactive lighting preview system

    E-Print Network [OSTI]

    Ragan-Kelley, Jonathan Millard

    2007-01-01

    We present an automated approach for high-quality preview of feature-film rendering during lighting design. Similar to previous work, we use a deep-framebuffer shaded on the GPU to achieve interactive performance. Our first ...

  13. Characterizing Shading Losses on Partially Shaded PV Systems (Presentation)

    SciTech Connect (OSTI)

    Deline, C.

    2010-09-23

    Presentation on shaded PV power loss, practical issues with modeling shaded PV, and methods of implementing partially shaded PV modeling.

  14. Image Recognition System for Automated Lighting Retrofit Assessment 

    E-Print Network [OSTI]

    Venable, K.; Bhatia, D.; Coverick, R.; Gutierrez, C.; Knight, J.; McGarry, D.; McGee, K.; Smith, Z.; Terrill, T. J.; Vanderford, B.; Weiser, R.; Wightman, K.; Rasmussen, B. P.

    2013-01-01

    .D., P.E. ESL-IE-13-05-39 Proceedings of the Thrity-Fifth Industrial Energy Technology Conference New Orleans, LA. May 21-24, 2013 After initially parsing the data, the program sends the parsed data matrix to the image processing portion... identified bulb. Following the spectral curve analysis, the report generation portion of the program receives the resulting matrix and analyzes the lighting for energy efficiency recommendations. These recommendations are then compiled into a final...

  15. Proximity signal and shade avoidance differences between early and late successional trees 

    E-Print Network [OSTI]

    Gilbert, Ian R; Jarvis, Paul G; Smith, Harry

    2001-06-14

    Competitive interactions between plants determine the success of individuals and species. In developing forests, competition for light is the predominant factor. Shade tolerators acclimate photosynthetically to low ...

  16. Photovoltaic Shading Testbed for Module-Level Power Electronics

    SciTech Connect (OSTI)

    Deline, C.; Meydbray, J.; Donovan, M.; Forrest, J.

    2012-05-01

    This document describes a repeatable test procedure that attempts to simulate shading situations, as would be experienced by typical residential rooftop photovoltaic (PV) systems. This type of shading test is particularly useful to evaluate the impact of different power conversion setups, including microinverters, DC power optimizers and string inverters, on overall system performance. The performance results are weighted based on annual estimates of shade to predict annual performance improvement. A trial run of the test procedure was conducted with a side by side comparison of a string inverter with a microinverter, both operating on identical 8kW solar arrays. Considering three different shade weighting conditions, the microinverter was found to increase production by 3.7% under light shading, 7.8% under moderate shading, and 12.3% under heavy shading, relative to the reference string inverter case. Detail is provided in this document to allow duplication of the test method at different test installations and for different power electronics devices.

  17. A Post-Occupancy Monitored Evaluation of the Dimmable Lighting, Automated Shading, and Underfloor Air Distribution System in The New York Times Building

    SciTech Connect (OSTI)

    Lee, E. S.; Fernandes, L. L.; Coffey, B.; McNeil, A.; Clear, R.; Webster, T.; Bauman, F.; Dickerhoff, D.; Heinzerling, D.; Hoyt, T.

    2013-01-01

    With aggressive goals to reduce national energy use and carbon emissions, the U.S. Department of Energy (DOE) will be looking to exemplary buildings that have already invested in new approaches to achieving the energy performance goals now needed at a national level. The New York Times Building, in New York, New York, incorporates a number of innovative technologies, systems and processes and could become model for widespread replication in new and existing buildings. A year-long monitored study was conducted to verify energy performance, assess occupant comfort and satisfaction with the indoor environment, and evaluate impact on maintenance and operations. Lessons learned were derived from the analysis; these lessons could help identify and shape policy, financial, or supporting strategies to accelerate diffusion in the commercial building market.

  18. A Post-Occupancy Monitored Evaluation of the Dimmable Lighting, Automated Shading, and Underfloor Air Distribution System in The New York Times Building

    E-Print Network [OSTI]

    2013-01-01

    Sustainable Energy Partnerships, Tarrytown, New York. Clear,Release: Average energy prices in New York – Northern NewYork Times Company. The New York State Energy Research and

  19. A Post-Occupancy Monitored Evaluation of the Dimmable Lighting, Automated Shading, and Underfloor Air Distribution System in The New York Times Building

    E-Print Network [OSTI]

    2013-01-01

    Boston, August 2–7, 2009. EnergyPlus Engineering Reference,buildings/energyplus/pdfs/engineeringreference.pdf Bauman,or from a calibrated EnergyPlus model (HVAC); and cost data

  20. A Post-Occupancy Monitored Evaluation of the Dimmable Lighting, Automated Shading, and Underfloor Air Distribution System in The New York Times Building

    E-Print Network [OSTI]

    2013-01-01

    energy savings for all three energy-efficiency measures issavings for the three innovative energy efficiency measures,savings that were attributable to each of the energy efficiency measures –

  1. A Post-Occupancy Monitored Evaluation of the Dimmable Lighting, Automated Shading, and Underfloor Air Distribution System in The New York Times Building

    E-Print Network [OSTI]

    2013-01-01

    for buildings with high churn rates where speed and cost isfor space reconfiguration or churn is included, payback time

  2. Efficient yet Accurate Models for Photovoltaic Modules with Shading Effects

    E-Print Network [OSTI]

    Tu, Tianheng

    2014-01-01

    Jiang, “Partial shading modeling of photovoltaic system withModels for Photovoltaic Modules with Shading Effects AModels for Photovoltaic Modules with Shading Effects by

  3. Partial Shade Evaluation of Distributed Power Electronics for Photovoltaic Systems: Preprint

    SciTech Connect (OSTI)

    Deline, C.; Meydbrav, J.; Donovan, M.

    2012-06-01

    Site survey data for several residential installations are provided, showing the extent and frequency of shade throughout the year. This background information is used to design a representative shading test that is conducted on two side-by-side 8-kW photovoltaic (PV) installations. One system is equipped with a standard string inverter, while the other is equipped with microinverters on each solar panel. Partial shade is applied to both systems in a comprehensive range of shading conditions, simulating one of three shade extents. Under light shading conditions, the microinverter system produced the equivalent of 4% annual performance improvement, relative to the string inverter system. Under moderate shading conditions, the microinverter system outperformed the string inverter system by 8%, and under heavy shading the microinverter increased relative performance by 12%. In all three cases, the percentage of performance loss that is recovered by the use of distributed power electronics is 40%-50%. Additionally, it was found that certain shading conditions can lead to additional losses in string inverters due to peak-power tracking errors and voltage limitations.

  4. Test Automation Test Automation

    E-Print Network [OSTI]

    Mousavi, Mohammad

    Test Automation Test Automation Mohammad Mousavi Eindhoven University of Technology, The Netherlands Software Testing 2013 Mousavi: Test Automation #12;Test Automation Outline Test Automation Mousavi: Test Automation #12;Test Automation Why? Challenges of Manual Testing Test-case design: Choosing inputs

  5. Integration of Sensors with Embedded Data Acquisition for Automation of Lighting Analysis 

    E-Print Network [OSTI]

    Terrill, T. J.; Bay, C. J.; Rasmussen, B. P.

    2014-01-01

    -Sixth Industrial Energy Technology Conference New Orleans, LA. May 20-23, 2014 Overview -Overview of Energy Assessments -Autonomous Energy Audits -Lighting Assessment Identify and Analyze Lighting Lighting Simulation ESL-IE-14-05-41 Proceedings of the Thrity...-Sixth Industrial Energy Technology Conference New Orleans, LA. May 20-23, 2014 Department of Energy Industrial Assessment Center ESL-IE-14-05-41 Proceedings of the Thrity-Sixth Industrial Energy Technology Conference New Orleans, LA. May 20-23, 2014 Energy Audit...

  6. Measured Impacts of Air Conditioner Condenser Shading 

    E-Print Network [OSTI]

    Parker, D. S.; Barkaszi, S. F.; Sonne, J. K.

    1996-01-01

    A study has been conducted by the Florida Solar Energy Center (FSEC) to examine if space cooling energy savings can be achieved from shading of residential air conditioning (AC) condenser units. The investigation consisted of before...

  7. much the shading will affect the system performance and develop designs to minimize the affects of shading.

    E-Print Network [OSTI]

    Oregon, University of

    of the system during the day is shown to illustrate the ABSTRACT Shading of photovoltaic (PV) panels canmuch the shading will affect the system performance and develop designs to minimize the affects of shading. Sun path charts have been developed that show the degree to which shading affects system

  8. Highly insulating Residential Windows Using Smart Automated Shading...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    performance of static prototype windows is within 0.03 Btuhr-ft2F (NFRC tolerance) of design specifications 09302014 2. Operational prototype that is autonomous, networked,...

  9. Highly Insulating Residential Windows Using Smart Automated Shading...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    sensormicroprocessor package that is easily installed and calibrated. Control algorithms will be developed that focus on maximum energy savings, while keeping occupants...

  10. Highly Insulating Residential Windows Using Smart Automated Shading |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (JournalvivoHigh energyHighland View school HighlandHydrogen and

  11. Highly Insulating Residential Windows Using Smart Automated Shading |

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirley Ann JacksonDepartment ofOffice ofofWindUpcomingcanGrid Integrationheat pumpJackDepartment of

  12. Integrated performance of an automated venetian blind/electric lighting system in a full-scale office environment

    SciTech Connect (OSTI)

    DiBartolomeo, D.L.; Lee, Eleanor; Selkowitz, S.E.; Vine, E.L.

    1998-02-01

    Comprehensive results are presented from a fill-scale testbed of a prototype automated venetian blind lighting system installed in two unoccupied, private offices in Oakland, California. The dynamic system balanced daylight against solar heat gains in real-time, to reduce perimeter zone energy use and to increase comfort. This limited proof-of-concept test was designed to work out practical ''bugs'' and refine design details to increase cost effectiveness and acceptability of this innovative technology for real-world applications. We present results from 14 months of tuning the system design and monitoring energy performance and control system operations. For this southeast-facing office, we found that 1-22% lighting energy savings, 13-28% cooling load reductions, and 13-28% peak cooling load reductions can be achieved by the dynamic system under clear sky and overcast conditions year round, compared to a static, partly closed blind with the same optimized daylighting control system. These energy savings increase if compared to conventional daylighting controls with manually-operated blinds. Monitored data indicated that the control system met design objectives under all weather conditions to within 10% for at least 90% of the year. A pilot human factors study indicated that some of our default control settings should be adjusted to increase user satisfaction. With these adjustments, energy savings will decrease. The final prototype design yielded a 10-year simple payback for this site. If mechanical system downsizing opportunities and qualitative improvements to worker's comfort are included, this innovative technology could be more cost effective. Marketing information for commercializing this technology is given.

  13. Automatic Adjustment of Image Sharpness in Relief Shading

    E-Print Network [OSTI]

    Giger, Christine

    Automatic Adjustment of Image Sharpness in Relief Shading Author: Marianna Serebryakova mserebry for analytical (i.e., automatic) relief shading methods. This Master thesis aims at the creation of a new method to perform automatic contrast adjustment in analytical relief shading. This is one of the core tasks of Swiss

  14. Lighting affects appearance LightSource emits photons

    E-Print Network [OSTI]

    Jacobs, David

    1 Lighting affects appearance #12;2 LightSource emits photons Photons travel in a straight line). And then some reach the eye/camera. #12;3 Reflectance Model how objects reflect light. Model light sources Algorithms for computing Shading: computing intensities within polygons Determine what light strikes what

  15. Automate avec sortie Automates et le temps

    E-Print Network [OSTI]

    Grigoras, .Romulus

    Automate avec sortie Automates et le temps Automates et l'inni Automates avec contrôle auxiliaire Généralisations Philippe Quéinnec 3 janvier 2011 1 / 26 #12;Automate avec sortie Automates et le temps Automates et l'inni Automates avec contrôle auxiliaire Plan 1 Automate avec sortie 2 Automates et le temps 3

  16. Efficient yet Accurate Models for Photovoltaic Modules with Shading Effects

    E-Print Network [OSTI]

    Tu, Tianheng

    2014-01-01

    modeling of wind and solar farms in colorado,” Renewablea series-parallel array of solar cells,” Greenbelt, MD, [4]He, Chair Mismatches between solar cells, such as shading

  17. Landscaping for Shade | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesse Bergkamp Graduate studentScienceLaboratory program LabsDesign »for Shade

  18. An hourly-based performance comparison of an integrated micro-structural perforated shading screen with standard shading systems

    E-Print Network [OSTI]

    Appelfeld, David

    2013-01-01

    energy consumption is strongly influenced by the solar gainsSolar shading is an effective strategy to reduce overheating and diffuse direct sunlight thus reducing energy consumption [

  19. SHADING CALCULATIONS FOR THE BIG DISH Jeff Cumpston1

    E-Print Network [OSTI]

    ], building the 'SG4' 500m2 Big Dish solar paraboloidal concentrator for solar-thermal to electric energy shading fraction in an array of two-axis tracking collectors. Annual shading on the SG4 dish included transport network, these losses may be reduced by closely spacing collectors within the array. Another form

  20. The VVV Templates Project. Towards an Automated Classification of VVV Light-Curves. I. Building a database of stellar variability in the near-infrared

    E-Print Network [OSTI]

    Angeloni, R; Catelan, M; Dékány, I; Gran, F; Alonso-García, J; Hempel, M; Navarrete, C; Andrews, H; Aparicio, A; Beamín, J C; Berger, C; Borissova, J; Peña, C Contreras; Cunial, A; de Grijs, R; Espinoza, N; Eyheramendy, S; Lopes, C E Ferreira; Fiaschi, M; Hajdu, G; Han, J; He?miniak, K G; Hempel, A; Hidalgo, S L; Ita, Y; Jeon, Y -B; Jordán, A; Kwon, J; Lee, J T; Martín, E L; Masetti, N; Matsunaga, N; Milone, A P; Minniti, D; Morelli, L; Murgas, F; Nagayama, T; Navarro, C; Ochner, P; Pérez, P; Pichara, K; Rojas-Arriagada, A; Roquette, J; Saito, R K; Siviero, A; Sohn, J; Sung, H -I; Tamura, M; Tata, R; Tomasella, L; Townsend, B; Whitelock, P

    2014-01-01

    Context. The Vista Variables in the V\\'ia L\\'actea (VVV) ESO Public Survey is a variability survey of the Milky Way bulge and an adjacent section of the disk carried out from 2010 on ESO Visible and Infrared Survey Telescope for Astronomy (VISTA). VVV will eventually deliver a deep near-IR atlas with photometry and positions in five passbands (ZYJHK_S) and a catalogue of 1-10 million variable point sources - mostly unknown - which require classifications. Aims. The main goal of the VVV Templates Project, that we introduce in this work, is to develop and test the machine-learning algorithms for the automated classification of the VVV light-curves. As VVV is the first massive, multi-epoch survey of stellar variability in the near-infrared, the template light-curves that are required for training the classification algorithms are not available. In the first paper of the series we describe the construction of this comprehensive database of infrared stellar variability. Methods. First we performed a systematic sea...

  1. Effect of shading by the table coral Acropora Hyacinthus on understory corals. [Acropora; Pocillopora

    SciTech Connect (OSTI)

    Stimson, J.

    1985-02-01

    Field surveys at Enewetak Atoll, Marshall Islands, show that coral density and diversity is much lower beneath Acropora table corals than in adjacent unshaded areas. Additionally, the understory community is predominantly composed of massive and encrusting species, while branching Acropora and Pocillopora predominate in unshaded areas. Results of experiments in which coral fragments were transferred to the shade of table Acropora and to adjacent unshaded areas show that shading slows the growth and leads to higher mortality of branching species, while massive and encrusting species are unaffected. Light measurements made beneath table Acropora show that illumination and irradiance values fall to levels at which most hermatypic corals do not occur. The fast-growing but fragile table Acropora are abundant in a wide variety of atoll habitats and grow rapidly to form a canopy approx. = 50 cm above the substrate. However, table Acropora also have high mortality rates, so that there is continuous production of unshaded areas. The growth and death of tables thus create local disturbances, and the resulting patchwork of recently shaded and unshaded areas may enhance coral diversity in areas of high coral cover.

  2. Laser Makes New Shade of Ultraviolet (COSMIC Log on MSNBC.com...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    cosmiclog.nbcnews.comnews201012285725603-laser-makes-new-shade-of-ultraviolet Submitted: Wednesday, December 29...

  3. Thermal and Electrical Effects of Partial Shade in Monolithic Thin-Film Photovoltaic Modules: Preprint

    SciTech Connect (OSTI)

    Silverman, Timothy J.; Deceglie, Michael G.; Sun, Xingshu; Garris, Rebekah L.; Alam, Muhammad Ashraful; Deline, Chris; Kurtz, Sarah

    2015-09-02

    Photovoltaic cells can be damaged by reverse bias stress, which arises during service when a monolithically integrated thin-film module is partially shaded. We introduce a model for describing a module's internal thermal and electrical state, which cannot normally be measured. Using this model and experimental measurements, we present several results with relevance for reliability testing and module engineering: Modules with a small breakdown voltage experience less stress than those with a large breakdown voltage, with some exceptions for modules having light-enhanced reverse breakdown. Masks leaving a small part of the masked cells illuminated can lead to very high temperature and current density compared to masks covering entire cells.

  4. Test Automation Ant JUnit Test Automation

    E-Print Network [OSTI]

    Mousavi, Mohammad

    Test Automation Ant JUnit Test Automation Mohammad Mousavi Eindhoven University of Technology, The Netherlands Software Testing 2012 Mousavi: Test Automation #12;Test Automation Ant JUnit Outline Test Automation Ant JUnit Mousavi: Test Automation #12;Test Automation Ant JUnit Why? Challenges of Manual Testing

  5. Visual Comfort Analysis of Innovative Interior and Exterior Shading Systems for Commercial Buildings using High Resolution Luminance Images

    SciTech Connect (OSTI)

    Konis, Kyle; Lee, Eleanor; Clear, Robert

    2011-01-11

    The objective of this study was to explore how calibrated high dynamic range (HDR) images (luminance maps) acquired in real world daylit environments can be used to characterize, evaluate, and compare visual comfort conditions of innovative facade shading and light-redirecting systems. Detailed (1536 x 1536 pixel) luminance maps were time-lapse acquired from two view positions in an unoccupied full scale testbed facility. These maps were analyzed using existing visual comfort metrics to quantify how innovative interior and exterior shading systems compare to conventional systems under real sun and sky conditions over a solstice-to-solstice test interval. The results provide a case study in the challenges and potential of methods of visualizing, evaluating and summarizing daily and seasonal variation of visual comfort conditions computed from large sets of image data.

  6. Measurement of light capture in solar cells from silver- and tin-plated patterned bus bars

    E-Print Network [OSTI]

    Winiarz, Christine Eve

    2007-01-01

    Bus bars on solar cells shade silicon from light. When the bus bars are patterned, they can reflect light back onto the silicon using total internal reflection. These patterned bus bars are tin plated and produce 1-2.5% ...

  7. Energy Savings Resulting from Shading Devices on Single-Family Residences in Austin, Texas 

    E-Print Network [OSTI]

    Pletzer, R. K.; Jones, J. W.; Hunn, B. D.

    1987-01-01

    Potential annual energy savings resulting from window shading devices on three prototypical Austin, Texas, single-family residences were computed in this study. Savings were calculated for interior (shades, blinds, draperies, window film, and tinted...

  8. Automation Status

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    member August 11, 2011 Automation Status ing NREL Manufacturing R&D Workshop Fuel Cell Proton Exchange Membrane (PEM) and Solid Oxide Fuel Cell (SOFC) Manufacturing Lines and test...

  9. Lighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousand CubicResourcelogo and-E C H N13,CenterCenterLighting Sign In

  10. Statistical representation of mountain shading Hydrology and Earth System Sciences, 8(6), 10451050 (2004) EGU

    E-Print Network [OSTI]

    Boyer, Edmond

    2004-01-01

    self-shaded or shaded by remote topography as functions of solar elevation and time of day. These expressions are in good agreement with results from a terrain shading model. Keywords: solar radiation, topography, surface energy balance, statistical parameterisation Introduction Solar radiation is a major

  11. Aalborg Universitet On the Impact of Partial Shading on PV Output Power

    E-Print Network [OSTI]

    Sera, Dezso

    Aalborg Universitet On the Impact of Partial Shading on PV Output Power Sera, Dezso; Baghzouz version (APA): Sera, D., & Baghzouz, Y. (2008). On the Impact of Partial Shading on PV Output Power from vbn.aau.dk on: juli 06, 2015 #12;On the Impact of Partial Shading on PV Output Power DEZSO SERA

  12. An image-based shading pipeline for 2D animation Hedlena Bezerra1

    E-Print Network [OSTI]

    de Figueiredo, Luiz Henrique

    An image-based shading pipeline for 2D animation Hedlena Bezerra1 Bruno Feij´o1 Luiz Velho2 1 PUC-based shading pipeline to give a 3D ap- pearance to a 2D character by inspecting the hand-drawn image directly interven- tion. The resulting shading pipeline can be easily applied to photorealistic and non

  13. A shading pipeline for 2D animation techniques HEDLENA BEZERRA

    E-Print Network [OSTI]

    de Figueiredo, Luiz Henrique

    A shading pipeline for 2D animation techniques HEDLENA BEZERRA 1 , LUIZ VELHO 2 , BRUNO FEIJÓ 1 1 Pura e Aplicada Figure 1: Pipeline - [D] Digitization; [T] Skeletonization; [C] Curve Extraction; [N is unknown, and the position information lacks depth. This work describes a pipeline to process 2D images

  14. Perceiving light versus material Frederick A.A. Kingdom

    E-Print Network [OSTI]

    Kingdom, Frederick A. A.

    Perceiving light versus material Frederick A.A. Kingdom McGill Vision Research, 687 Pine Av. W. Rm s t r a c t Humans rarely confuse variations in light intensity, such as shadows, shading, light sources to discriminate light from material. These cues include luminance relations, figural relations, 3D-shape, depth

  15. Impact of Fixed Exterior Shading on Daylighting: A Case Study of the David Brower Center

    E-Print Network [OSTI]

    Zelenay, Krystyna

    2011-01-01

    shading type Fixed exterior white-painted aluminum louvers on 2nd and 3rd floors, awning at ground floor, photovoltaic

  16. Partially Shaded Operation of a Grid-Tied PV System: Preprint

    SciTech Connect (OSTI)

    Deline, C.

    2009-06-01

    This paper presents background and experimental results from a single-string grid-tied PV system, operated under a variety of shading conditions.

  17. Utilization and Dissipation of Absorbed Light Energy in the Epiphytic Crassulacean Acid Metabolism Bromeliad Tillandsia Ionantha

    E-Print Network [OSTI]

    Martin, Craig E.; Tuffers, Arnd; Herppich, Werner B.; von Willert, Dieter J.

    1999-01-01

    Past studies of the ability of epiphytic Crassulacean acid metabolism bromeliads to acclimate to different light levels yield conflicting findings; some indicate that these plants are similar to shade plants whereas ...

  18. Enhancing Efficiency and Robustness of a Photovoltaic Power System under Partial Shading

    E-Print Network [OSTI]

    Pedram, Massoud

    Enhancing Efficiency and Robustness of a Photovoltaic Power System under Partial Shading Yanzhi}@usc.edu, 2 E-mail: {yhkim, naehyuck}@elpl.snu.ac.kr Abstract Photovoltaic (PV) power systems have been widely.1% to 53.3% compared with the baseline systems. Keywords Photovoltaic system, partial shading, hybrid

  19. TAKE-HOME EXP. # 7a Light Imagined as Traveling in Straight Lines

    E-Print Network [OSTI]

    Pickett, Galen T.

    TAKE-HOME EXP. # 7a Light Imagined as Traveling in Straight Lines: Sun Images in the Shade of a Tree. Our ordinary senses imply that light travels in a straight line. In fact, Isaac Newton was so convinced of light's straight-line travel that he proposed a particle model for light, saying: "Are

  20. Daylighting: Measuring the Performance of Light Shelves and Occupant-Controlled Blinds on a Dimmed Lighting Systems 

    E-Print Network [OSTI]

    Floyd, D. B.; Parker, D. S.

    1998-01-01

    , and poor shading devices (such as opaque blinds). References Floyd, D. B. and D. S. Parker. 1995. "Feld Commissioning of a Daylight-Dimming Lighting System", Proceedings of the 3d European Conference on Energy-Efficient Lighting, pp. 83- 89...

  1. Threading plasmonic nanoparticle strings with light

    E-Print Network [OSTI]

    Herrmann, Lars O.; Valev, Ventsislav K.; Tserkezis, Christos; Barnard, Jonathan S.; Kasera, Setu; Scherman, Oren A.; Aizpurua, Javier; Baumberg, Jeremy J.

    2014-07-28

    with the 805 nm laser. (c,d) Simulated spectra for 50 and 60 nm NPs formed into threads, for resonant chain lengths of six and four NPs, respectively. The grey shading depicts the FWHM of the experimentally observed resonance. The simulations show... the thread, excellent prospects exist for device application in photovoltaics, sensing and surface-enhanced Raman scattering. By further tailoring the light fields, entirely new structures can be created. For instance, using light with azimuthal angular...

  2. Effectiveness of Shading Air-Cooled Condensers of Air-Conditioning Systems 

    E-Print Network [OSTI]

    ElSherbini, A.; Maheshwari, G. P.

    2010-01-01

    of the condenser and the high ambient temperatures can be detrimental for the energy performance. The effectiveness of shading the condensing unit to mitigate this adverse impact is investigated in this paper. A limiting analysis compares the performance of several...

  3. Impacts of Shading and Glazing Combinations on Residential Energy Use in a Hot Dry Climate

    SciTech Connect (OSTI)

    Farrar-Nagy, S.; Anderson, R.; Hancock, C.E. (National Renewable Energy Laboratory); Reeves, P. (Partnership for Resource Conservation)

    2000-08-25

    A residential building in Tucson, Arizona, was studied to evaluate opportunities for reducing cooling energy use in a hot dry climate. The reduction of solar heat gain was strongly influenced by spectrally selective windows, architectural shading, and site shading from adjacent buildings. The study emphasized accurately modeling these features to account for effects on the energy load. Building performance was modeled using a detailed hourly energy simulation tool and was measured while unoccupied for a period of 12 days. Model inputs included direct measurements of the net air exchange rate, surface reflectance, and window transmittance. Model results showed good agreement with the direct measurements of cooling loads and air-conditioning energy use. A parametric study of annual energy use is presented showing the impacts of glazing type, architectural shading, site shading, and building orientation. It is important to understand these interactions to optimize energy savings in community-scale housing developments.

  4. Development and Validation of a Computer Model for Energy-Efficient Shaded Fenestration Design 

    E-Print Network [OSTI]

    Oh, Kie Whan

    2000-01-01

    transfer through an unshaded window at any orientation. A computerized simulation model, called the Shaded Fenestration Design (SFD) model, was developed that is capable of calculating the amount of solar radiation for a clear day as well as calculating...

  5. A Real-Time Procedural Shading System for Programmable Graphics Hardware

    E-Print Network [OSTI]

    Stanford University

    A Real-Time Procedural Shading System for Programmable Graphics Hardware Kekoa Proudfoot£ Stanford University Abstract Real-time graphics hardware is becoming programmable, but this programmable hardware one computation frequency. Internally, our system virtualizes limited hardware resources to allow

  6. Photovoltaic Shading Testbed for Module-Level Power Electronics: 2014 Update

    SciTech Connect (OSTI)

    Deline, C.; Meydbray, J.; Donovan, M.

    2014-08-01

    The 2012 NREL report 'Photovoltaic Shading Testbed for Module-Level Power Electronics' provides a standard methodology for estimating the performance benefit of distributed power electronics under partial shading conditions. Since the release of the report, experiments have been conducted for a number of products and for different system configurations. Drawing from these experiences, updates to the test and analysis methods are recommended. Proposed changes in data processing have the benefit of reducing the sensitivity to measurement errors and weather variability, as well as bringing the updated performance score in line with measured and simulated values of the shade recovery benefit of distributed PV power electronics. Also, due to the emergence of new technologies including sub-module embedded power electronics, the shading method has been extended to include power electronics that operate at a finer granularity than the module level. An update to the method is proposed to account for these emerging technologies that respond to shading differently than module-level devices. The partial shading test remains a repeatable test procedure that attempts to simulate shading situations as would be experienced by typical residential or commercial rooftop photovoltaic (PV) systems. Performance data for multiple products tested using this method are discussed, based on equipment from Enphase, Solar Edge, Maxim Integrated and SMA. In general, the annual recovery of shading losses from the module-level electronics evaluated is 25-35%, with the major difference between different trials being related to the number of parallel strings in the test installation rather than differences between the equipment tested.

  7. Multiplex automated genome engineering

    DOE Patents [OSTI]

    Church, George M; Wang, Harris H; Isaacs, Farren J

    2013-10-29

    The present invention relates to automated methods of introducing multiple nucleic acid sequences into one or more target cells.

  8. Joint Genome Institute's Automation Approach and History

    E-Print Network [OSTI]

    Roberts, Simon

    2006-01-01

    Joint Genome Institute’s Automation Approach and Historythroughput environment; – automation does not necessarilyissues “Islands of Automation” – modular instruments with

  9. TWO SIMPLE TOOLS FOR DESIGN OF FIXED SHADES

    E-Print Network [OSTI]

    Nawrocki, Dave

    2013-01-01

    Chart: Climate and Building Data The Passive Solar Group atPassive solar and conservation retrofits are planned for a light industrial building

  10. Strategies for Restoring Native Riparian Understory Plants Along the Sacramento River: Timing, Shade, Non-Native Control, and Planting Method

    E-Print Network [OSTI]

    Moore, Prairie L.; Holl, Karen D.; Wood, David M.

    2011-01-01

    riparian restoration on the Sacramento River. San Franciscoforest on the middle Sacramento River [Masters]. Chico (CA):Understory Plants Along the Sacramento River: Timing, Shade,

  11. An Automation System for Optimizing a Supply Chain Network Design under the Influence of Demand Uncertainty

    E-Print Network [OSTI]

    Polany, Rany

    2012-01-01

    Automation . . . . . . . . . . . . . . . . . . . . . . iii 3Automation . . . . . . . . . . . . . . . . . . . . . . 5Dashboard/Cockpit Automation . . . . . . . . . . . . .

  12. A LEO-Based Solar-Shade System to Mitigate Global Warming

    E-Print Network [OSTI]

    Rahul Suresh; Andrew Meulenberg

    2015-04-20

    The development of a Low-Earth-Orbit (LEO) based solar-shade system, as part of a technically- and financially-viable multipurpose system to provide long-term solutions to global warming and the energy crisis is discussed. The proposed solar-shade and power system would be enabled by the development of a previously-proposed less-expensive, environment-friendly, space-elevator system to lift mass into space. The solar shades, even during their early deployment and growth in LEO, would provide benefits such as reduction of space-debris and depletion of the Van Allen radiation belts.The Terrestrial temperature profile has been approximated for each latitudinal zone with a one-dimensional model. A shade ring at an altitude of 2000-4000 km, consisting of thin-film mega panels totaling up to 4% of the earths surface area (to block ~1% of insolation), is proposed. The effects of such near-polar rings on the global temperature pattern has been examined using the simple model. Specific emphasis has been laid on this effect in the Polar Regions. One such proposed ring could reduce the peak summer temperature of the Polar Regions (80-90 degree latitude) by almost 3K. The tilting of the solar-shades, to reduce their cooling effect at the poles and to increase it in the near-polar regions, is recommended.

  13. Copyright (c) Cem Kaner, Automated Testing. 1 Software Test Automation:Software Test Automation

    E-Print Network [OSTI]

    Copyright (c) Cem Kaner, Automated Testing. 1 Software Test Automation:Software Test Automation: A RealA Real--World ProblemWorld Problem Cem Kaner, Ph.D., J.D. #12;Copyright (c) Cem Kaner, Automated Testing. 2 This TalkThis Talk The most widely used class of automated testing tools leads senior software

  14. Architectures of Test Automation 1 High Volume Test AutomationHigh Volume Test Automation

    E-Print Network [OSTI]

    Architectures of Test Automation 1 High Volume Test AutomationHigh Volume Test Automation Cem Kaner Institute of Technology October 2003 #12;Architectures of Test Automation 2 Acknowledgements developed a course on test automation architecture, and in the Los Altos Workshops on Software Testing

  15. High Volume Test Automation 1 High Volume Test AutomationHigh Volume Test Automation

    E-Print Network [OSTI]

    High Volume Test Automation 1 High Volume Test AutomationHigh Volume Test Automation Keynote Automation 2 AcknowledgementsAcknowledgements · Many of the ideas in this presentation were initially jointly developed with Doug Hoffman,as we developed a course on test automation architecture, and in the Los Altos

  16. Summary In shaded environments, minimizing dark respi-ration during growth could be an important aspect of maintain-

    E-Print Network [OSTI]

    Machado, Jose-Luis

    Summary In shaded environments, minimizing dark respi- ration during growth could be an important aspect of maintain- ing a positive whole-plant net carbon balance. Changes with plant size in both (Kraus et al. 1989, Tjoelker et al. 1999a). In deeply shaded environments, dark respiration is likely

  17. Automated Demand Response and Commissioning

    E-Print Network [OSTI]

    Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Bourassa, Norman

    2005-01-01

    Fully-Automated Demand Response Test in Large Facilities14in DR systems. Demand Response using HVAC in Commercialof Fully Automated Demand Response in Large Facilities”

  18. Metamerism-based shading illusion Daisuke Miyazaki, Takafumi Saneshige, Masashi Baba, Ryo Furukawa, Masahito Aoyama, Shinsaku

    E-Print Network [OSTI]

    Tokyo, University of

    oil painting as if it is a 3D object with plausible shading. 1 Introduction The phenomenon where two, printing, and advertising industries. This pa- per rebels against such common sense, and fully brings out. Bala et al. [9] used a CMYK printer to create watermarks using metamerism. They used two types of inks

  19. Effects of Shade on Blue Oak and Coast Live Oak Regeneration in California Annual Grasslands1

    E-Print Network [OSTI]

    Effects of Shade on Blue Oak and Coast Live Oak Regeneration in California Annual Grasslands1 manipulation. A split-plot, multifactorial experi ment was designed to test whether blue oak (Quercus douglasii herbaceous vegetation was not manipulated. Even under conditions of prolonged, severe drought, blue oaks

  20. SOLAR HEAT GAIN THROUGH FENESTRATION SYSTEMS CONTAINING SHADING: SUMMARY OF PROCEDURES FOR

    E-Print Network [OSTI]

    SOLAR HEAT GAIN THROUGH FENESTRATION SYSTEMS CONTAINING SHADING: SUMMARY OF PROCEDURES that with a drastic simplifying assumption these methods can be used to calculate system solar-optical properties and solar heat gain coefficients for arbitrary glazing systems, while requiring limited data about

  1. SOLAR HEAT GAIN THROUGH FENESTRATION SYSTEMS CONTAINING SHADING: PROCEDURES FOR ESTIMATING

    E-Print Network [OSTI]

    SOLAR HEAT GAIN THROUGH FENESTRATION SYSTEMS CONTAINING SHADING: PROCEDURES FOR ESTIMATING that with a drastic simplifying assumption these methods can be used to calculate system solar-optical properties and solar heat gain coefficients for arbitrary glazing systems, while requiring limited data about

  2. New MS-Windows-Based Educational Software for Teaching the Sunpath Diagram and Shading Mask Protractor 

    E-Print Network [OSTI]

    Oh, J. K. W.; Haberl, J. S.

    1996-01-01

    software package that includes a tutorial on how the sunpath and shading mask protrotractor are constructed. protractor which represents the hemispherical view that one could obtained if a photo could be taken with a fisheye-lens camera that is facing...

  3. Exposing Photo Manipulation from Shading and Shadows Eric Kee, Columbia University

    E-Print Network [OSTI]

    Bucci, David J.

    Exposing Photo Manipulation from Shading and Shadows Eric Kee, Columbia University James F. O to find a solution provides evidence of photo tampering. Categories and Subject Descriptors: I.2--Miscellaneous Additional Key Words and Phrases: Image forensics, photo manipulation, image manipulation, forgery detection

  4. A LEO-Based Solar-Shade System to Mitigate Global Warming

    E-Print Network [OSTI]

    Suresh, Rahul

    2015-01-01

    The development of a Low-Earth-Orbit (LEO) based solar-shade system, as part of a technically- and financially-viable multipurpose system to provide long-term solutions to global warming and the energy crisis is discussed. The proposed solar-shade and power system would be enabled by the development of a previously-proposed less-expensive, environment-friendly, space-elevator system to lift mass into space. The solar shades, even during their early deployment and growth in LEO, would provide benefits such as reduction of space-debris and depletion of the Van Allen radiation belts.The Terrestrial temperature profile has been approximated for each latitudinal zone with a one-dimensional model. A shade ring at an altitude of 2000-4000 km, consisting of thin-film mega panels totaling up to 4% of the earths surface area (to block ~1% of insolation), is proposed. The effects of such near-polar rings on the global temperature pattern has been examined using the simple model. Specific emphasis has been laid on this e...

  5. RF test bench automation Description

    E-Print Network [OSTI]

    Dobigeon, Nicolas

    RF test bench automation Description: Callisto would like to implement automated RF test bench. Three RF test benches have to be studied and automated: LNA noise temperature test bench LNA gain phase of the test benches and an implementation of the automation phase. Tasks: Noise temperature

  6. Automation of Feynman Diagram Evaluation

    E-Print Network [OSTI]

    M. Tentyukov; J. Fleischer

    1998-02-04

    A C-program DIANA (DIagram ANAlyser) for the automation of Feynman diagram evaluations is presented.

  7. Preprint version, final version at http://ieeexplore.ieee.org/ 2015 IEEE Int. Conf. on Robotics & Automation, Seattle, WA, USA Design, Identification and Experimental Testing of a Light-weight

    E-Print Network [OSTI]

    interaction tasks. In [7], a light-weight industrial arm is attached to a small-size helicopter, under

  8. Automation of Diagrammatic Reasoning 

    E-Print Network [OSTI]

    Jamnik, Mateja; Bundy, Alan; Green, Ian

    1997-01-01

    Theorems in automated theorem proving are usually proved by logical formal proofs. However, there is a subset of problems which humans can prove in a different way by the use of geometric operations on diagrams, so called diagrammatic proofs...

  9. Automated Lattice Perturbation Theory

    SciTech Connect (OSTI)

    Monahan, Christopher

    2014-11-01

    I review recent developments in automated lattice perturbation theory. Starting with an overview of lattice perturbation theory, I focus on the three automation packages currently "on the market": HiPPy/HPsrc, Pastor and PhySyCAl. I highlight some recent applications of these methods, particularly in B physics. In the final section I briefly discuss the related, but distinct, approach of numerical stochastic perturbation theory.

  10. Automated Continuous Commissioning of Commercial Buildings

    E-Print Network [OSTI]

    Bailey, Trevor

    2013-01-01

    Engineers BACnet: Building Automation and Control Networksprotocol for building automation and control networks. It iscommunication of building automation and control systems for

  11. Development of Building Automation and Control Systems

    E-Print Network [OSTI]

    Yang, Yang; Zhu, Qi; Maasoumy, Mehdi; Sangiovanni-Vincentelli, Alberto

    2012-01-01

    A design flow for building automation and control systems,’’Development of Building Automation and Control Systems Yanga design flow for building automation systems that focuses

  12. Development of Building Automation and Control Systems

    E-Print Network [OSTI]

    Yang, Yang; Zhu, Qi; Maasoumy, Mehdi; Sangiovanni-Vincentelli, Alberto

    2012-01-01

    A design flow for building automation and control systems,’’Development of Building Automation and Control Systems Yangdesign of the build- ing automation system (including the

  13. NREL: Technology Deployment - Remote Shading Tool Has Potential to Reduce

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines lightGeospatial ToolkitSMARTS -Being Replicated AcrossSolar Soft Costs by

  14. Psychophysical evaluations of modulated color rendering for energy performance of LED-based architectural lighting

    E-Print Network [OSTI]

    Thompson, Maria do Rosário

    2007-01-01

    This thesis is focused on the visual perception evaluation of colors within an environment of a highly automated lighting control strategy. Digitally controlled lighting systems equipped with light emitting diodes, LEDs, ...

  15. Deep multi-frequency radio observations of the SHADES fields and the nature of the faint radio populaton 

    E-Print Network [OSTI]

    Ibar, Eduardo

    2009-01-01

    The two SCUBA HAlf-Degree Extragalactic Survey (SHADES) fields are amongst the richest places in the sky in terms of multi-wavelength coverage. They comprise an eastern section of the Lockman Hole (LH) and the central ...

  16. The Feasibility of Shading the Greenhouse with Dust Clouds at the Stable Lunar Lagrange Points

    E-Print Network [OSTI]

    Curtis Struck

    2007-01-25

    There are many indications that anthropogenic global warming poses a serious threat to our civilization and its ecological support systems. Ideally this problem will be overcome by reducing greenhouse gas emissions. Various space-based methods, including large-scale solar shades, diffusers or atmospheric pollutants, have been considered to reduce the solar constant (input flux) and the warming in case emissions reductions are not achieved in a timely way. Here it is pointed out that proposed technologies for near-Earth orbiting comet deflection, suggest a different kind of space-based solar shade. This shade would be made up of micron-sized dust particles derived from comet fragments or lunar mining, and positioned in orbits near the triangular Lagrange points of the Earth-Moon system. Solar radiation pressure can render such orbits unstable, but a class of nearly resonant, and long-lived orbits is shown to exist, though the phase space volume of such orbits depends on dust grain size. Advantages and disadvantages of this scheme relative to others are considered.

  17. Honeywell Demonstrates Automated Demand Response Benefits for...

    Office of Environmental Management (EM)

    Honeywell Demonstrates Automated Demand Response Benefits for Utility, Commercial, and Industrial Customers Honeywell Demonstrates Automated Demand Response Benefits for Utility,...

  18. Automated Transportation Logistics and Analysis System (ATLAS...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Packaging and Transportation Automated Transportation Logistics and Analysis System (ATLAS) Automated Transportation Logistics and Analysis System (ATLAS) The Department of...

  19. Automated gas chromatography

    DOE Patents [OSTI]

    Mowry, Curtis D. (Albuquerque, NM); Blair, Dianna S. (Albuquerque, NM); Rodacy, Philip J. (Albuquerque, NM); Reber, Stephen D. (Corrales, NM)

    1999-01-01

    An apparatus and process for the continuous, near real-time monitoring of low-level concentrations of organic compounds in a liquid, and, more particularly, a water stream. A small liquid volume of flow from a liquid process stream containing organic compounds is diverted by an automated process to a heated vaporization capillary where the liquid volume is vaporized to a gas that flows to an automated gas chromatograph separation column to chromatographically separate the organic compounds. Organic compounds are detected and the information transmitted to a control system for use in process control. Concentrations of organic compounds less than one part per million are detected in less than one minute.

  20. Automation of Capacity Bidding with an Aggregator Using Open Automated Demand Response

    E-Print Network [OSTI]

    Kiliccote, Sila

    2011-01-01

    Protocol for Building Automation and Control  Networks.  Protocol for Building Automation and Control  Networks, Protocol for building Automation and Controls Networks.   

  1. Automation of Capacity Bidding with an Aggregator Using Open Automated Demand Response

    E-Print Network [OSTI]

    Kiliccote, Sila

    2011-01-01

    Protocol for Building Automation and Control  Networks.  Protocol for Building Automation and Control  Networks, Demand Response Automation Server  Demand Response Research 

  2. Automated gas chromatography

    DOE Patents [OSTI]

    Mowry, C.D.; Blair, D.S.; Rodacy, P.J.; Reber, S.D.

    1999-07-13

    An apparatus and process for the continuous, near real-time monitoring of low-level concentrations of organic compounds in a liquid, and, more particularly, a water stream. A small liquid volume of flow from a liquid process stream containing organic compounds is diverted by an automated process to a heated vaporization capillary where the liquid volume is vaporized to a gas that flows to an automated gas chromatograph separation column to chromatographically separate the organic compounds. Organic compounds are detected and the information transmitted to a control system for use in process control. Concentrations of organic compounds less than one part per million are detected in less than one minute. 7 figs.

  3. Automated macromolecular crystallization screening

    DOE Patents [OSTI]

    Segelke, Brent W.; Rupp, Bernhard; Krupka, Heike I.

    2005-03-01

    An automated macromolecular crystallization screening system wherein a multiplicity of reagent mixes are produced. A multiplicity of analysis plates is produced utilizing the reagent mixes combined with a sample. The analysis plates are incubated to promote growth of crystals. Images of the crystals are made. The images are analyzed with regard to suitability of the crystals for analysis by x-ray crystallography. A design of reagent mixes is produced based upon the expected suitability of the crystals for analysis by x-ray crystallography. A second multiplicity of mixes of the reagent components is produced utilizing the design and a second multiplicity of reagent mixes is used for a second round of automated macromolecular crystallization screening. In one embodiment the multiplicity of reagent mixes are produced by a random selection of reagent components.

  4. Analytically calculating shading in regular arrays of sun-pointing collectors

    SciTech Connect (OSTI)

    Meller, Yosef

    2010-11-15

    A method is presented for deriving an algorithm for analytically calculating shading of sun-pointing solar collectors by other identical collectors in the field. The method is particularly suited to regularly-spaced collectors, with convex aperture shapes. Using this method, an algorithm suitable for circular-aperture collectors is derived. The algorithm is validated against results obtained using an existing algorithm, and an example for usage of the algorithm as a tool for validating assumptions of an existing algorithm is presented. (author)

  5. Energy Stability: How to Continually move your schools to a deeper shade of green 

    E-Print Network [OSTI]

    Corbitt, C.

    2014-01-01

    to continually move your schools to a deeper shade of green ESL-KT-14-11-16 CATEE 2014: Clean Air Through Efficiency Conference, Dallas, Texas Nov. 18-20 Is there a difference between achieving energy savings and sustaining energy savings? And if so, what... are these differences? ESL-KT-14-11-16 CATEE 2014: Clean Air Through Efficiency Conference, Dallas, Texas Nov. 18-20 Questions we should ask about Energy Sustainability Why do we want to tackle it? What are the obstacles that we will face? How can we overcome them? ESL...

  6. New Educational Software for Teaching the Sunpath Diagram and Shading Mask Protractor 

    E-Print Network [OSTI]

    Oh, J.; Haberl, J. S.

    1997-01-01

    , Department of Architecture, Texas A&M University, College Station, Texas ABSTRACT The well-known versions of the sunpath diagrams that appear in the AIA's Architectural Graphics Standards are based on the equidistant sky dome projections and use a shading... for the facade in which the window is being analyzed, and placed on top of the sunpath diagram to determine if a point centered at the base of the window is exposed to direct sunlight. Teaching this process to architects and engineers is tedious and error...

  7. Automated Job Hazards Analysis

    Broader source: Energy.gov [DOE]

    AJHA Program - The Automated Job Hazard Analysis (AJHA) computer program is part of an enhanced work planning process employed at the Department of Energy's Hanford worksite. The AJHA system is routinely used to performed evaluations for medium and high risk work, and in the development of corrective maintenance work packages at the site. The tool is designed to ensure that workers are fully involved in identifying the hazards, requirements, and controls associated with tasks.

  8. Methodology for Prototyping Increased Levels of Automation

    E-Print Network [OSTI]

    Valasek, John

    Methodology for Prototyping Increased Levels of Automation for Spacecraft Rendezvous Functions of automation than previous NASA vehicles, due to program requirements for automation, including Automated Ren authority between humans and computers (i.e. automation) as a prime driver for cost, safety, and mission

  9. The effects of manger shades and manger sprinklers on heat-stressed lactating Holstein dairy cattle in Texas 

    E-Print Network [OSTI]

    Fourdraine, Windi Anne

    1991-01-01

    THE EFFECTS OF MANGER SHADES AND MANGER SPRINKLERS ON HEAT-STRESSED LACTATING HOLSTEIN DAIRY CATTLE IN TEXAS A Thesis by WINDI ANNE FOURDRAINE Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment... of the requirements for the degree of MASTER OF SCIENCE May 1991 Major Subject: Dairy Science THE EFFECTS OF MANGER SHADES AND MANGER SPRINKLERS ON HEAT-STRESSED LACTATING HOLSTEIN DAIRY CATTLE IN TEXAS A Thesis by WINDI ANNE FOURDRAINE Approved as to style...

  10. Enhanced Software for Displaying Orthographic, Stereographic, Gnomic and Cylindrical Projections of the Sunpath Diagram and Shading Mask Protractor 

    E-Print Network [OSTI]

    Oh, K. W.; Haberl, J. S.; Degelman, L. O.

    2000-01-01

    -path diagram and shading mask protractor are well known graphic formats that have traditionally been used by architects and engineers to analyze whether or not a solar shading device will block direct sunlight on a given point in the plane of an exterior... (Schnieders et al. 1997), AWNSHADE (McCluney 1995), SOLAR-2 (Sheu 1986), SUNPATH (McCluney 1995), and SUNSPEC (McCluney 1995) programs. OPAQUE (Abouella and Milne 1990), developed by the Department of Architecture at UCLA, draws a detailed wall or roof...

  11. Installation and Commissioning Automated Demand Response Systems

    E-Print Network [OSTI]

    Kiliccote, Sila; Global Energy Partners; Pacific Gas and Electric Company

    2008-01-01

    Protocol for Building Automation and Control Networks.EPRI), and C&C Building Automation, Inc. PG&E directlyLBNL hired C&C Building Automation to start transferring

  12. Light-Light Scattering

    E-Print Network [OSTI]

    Naohiro Kanda

    2011-06-03

    For a long time, it is believed that the light by light scattering is described properly by the Lagrangian density obtained by Heisenberg and Euler. Here, we present a new calculation which is based on the modern field theory technique. It is found that the light-light scattering is completely different from the old expression. The reason is basically due to the unphysical condition (gauge condition) which was employed by the QED calcualtion of Karplus and Neumann. The correct cross section of light-light scattering at low energy of $(\\frac{\\omega}{m} \\ll 1)$ can be written as $ \\displaystyle{\\frac{d\\sigma}{d\\Omega}=\\frac{1}{(6\\pi)^2}\\frac{\\alpha^4} {(2\\omega)^2}(3+2\\cos^2\\theta +\\cos^4\\theta)}$.

  13. Automated fiber pigtailing machine

    DOE Patents [OSTI]

    Strand, O.T.; Lowry, M.E.

    1999-01-05

    The Automated Fiber Pigtailing Machine (AFPM) aligns and attaches optical fibers to optoelectronic (OE) devices such as laser diodes, photodiodes, and waveguide devices without operator intervention. The so-called pigtailing process is completed with sub-micron accuracies in less than 3 minutes. The AFPM operates unattended for one hour, is modular in design and is compatible with a mass production manufacturing environment. This machine can be used to build components which are used in military aircraft navigation systems, computer systems, communications systems and in the construction of diagnostics and experimental systems. 26 figs.

  14. Automated fiber pigtailing machine

    DOE Patents [OSTI]

    Strand, Oliver T. (Castro Valley, CA); Lowry, Mark E. (Castro Valley, CA)

    1999-01-01

    The Automated Fiber Pigtailing Machine (AFPM) aligns and attaches optical fibers to optoelectonic (OE) devices such as laser diodes, photodiodes, and waveguide devices without operator intervention. The so-called pigtailing process is completed with sub-micron accuracies in less than 3 minutes. The AFPM operates unattended for one hour, is modular in design and is compatible with a mass production manufacturing environment. This machine can be used to build components which are used in military aircraft navigation systems, computer systems, communications systems and in the construction of diagnostics and experimental systems.

  15. Installation and Commissioning Automated Demand Response Systems

    E-Print Network [OSTI]

    Kiliccote, Sila; Global Energy Partners; Pacific Gas and Electric Company

    2008-01-01

    their partnership in demand response automation research andand Techniques for Demand Response. LBNL Report 59975. Mayof Fully Automated Demand Response in Large Facilities.

  16. Morphological and Ultrastructural Studies of Plant Cuticular Membranes. I. Sun and Shade Leaves of Quercus velutina (Fagaceae)

    E-Print Network [OSTI]

    Osborn, Jeffrey M.; Taylor, Thomas N.

    1990-12-01

    wax. Both the adaxial and abaxial epidermises have the same basic fine structure in sun and shade leaves with respect to the outer periclinal cell wall and overlying CM. The cell wall is lamellate and the CM is composed of a two-zoned, reticulate...

  17. Capital Cost-Aware Design and Partial Shading-Aware Architecture Optimization of a Reconfigurable Photovoltaic System

    E-Print Network [OSTI]

    Pedram, Massoud

    Capital Cost-Aware Design and Partial Shading-Aware Architecture Optimization of a Reconfigurable, increase the capital cost of the PV system. In this paper, we group a number of PV cells into a PV macro-cell is the result of a trade-off between the decreased PV system capital cost and enhanced PV system performance

  18. How cellulose-based leaf toughness and lamina density contribute to long leaf lifespans of shade-tolerant species

    E-Print Network [OSTI]

    Kitajima, Kaoru

    How cellulose-based leaf toughness and lamina density contribute to long leaf lifespans of shade-8137.2012.04203.x Key words: anti-herbivory defence, cellulose, herbivory, lamina density, leaf lifespan, leaf, a recently recognized indicator of material strength per unit mass, was linearly correlated with cellulose

  19. To appear in IEEE Trans. On CAD 1 Abstract--Partial shading is a serious obstacle to the effective

    E-Print Network [OSTI]

    Pedram, Massoud

    utilization of photovoltaic (PV) systems since it can result in a significant degradation in the PV system of a large-scale PV system comprised of 3 PV modules with 60 PV cells per module. Index Terms--Photovoltaic system, partial shading, photovoltaic module reconfiguration, dynamic programming. I. INTRODUCTION UE

  20. Making the best of the worst of times: traits underlying combined shade and drought tolerance of Ruscus aculeatus

    E-Print Network [OSTI]

    Sack, Lawren

    woodland areas of the Mediterranean Basin and southern Europe. The combined drought and shade tolerance on a detailed trait survey for Ruscus aculeatus L. and Ruscus microglossum Bertol., focusing on gas exchange, low shoot hydraulic conductance, low cuticular conductance, and substantial water storage tissue

  1. Robust automated knowledge capture.

    SciTech Connect (OSTI)

    Stevens-Adams, Susan Marie; Abbott, Robert G.; Forsythe, James Chris; Trumbo, Michael Christopher Stefan; Haass, Michael Joseph; Hendrickson, Stacey M. Langfitt

    2011-10-01

    This report summarizes research conducted through the Sandia National Laboratories Robust Automated Knowledge Capture Laboratory Directed Research and Development project. The objective of this project was to advance scientific understanding of the influence of individual cognitive attributes on decision making. The project has developed a quantitative model known as RumRunner that has proven effective in predicting the propensity of an individual to shift strategies on the basis of task and experience related parameters. Three separate studies are described which have validated the basic RumRunner model. This work provides a basis for better understanding human decision making in high consequent national security applications, and in particular, the individual characteristics that underlie adaptive thinking.

  2. (No) Security in Automation!?

    E-Print Network [OSTI]

    Lüders, S

    2008-01-01

    Modern Information Technologies like Ethernet, TCP/IP, web server or FTP are nowadays increas-ingly used in distributed control and automation systems. Thus, information from the factory floor is now directly available at the management level (From Shop-Floor to Top-Floor) and can be ma-nipulated from there. Despite the benefits coming with this (r)evolution, new vulnerabilities are in-herited, too: worms and viruses spread within seconds via Ethernet and attackers are becoming interested in control systems. Unfortunately, control systems lack the standard security features that usual office PCs have. This contribution will elaborate on these problems, discuss the vulnerabilities of modern control systems and present international initiatives for mitigation.

  3. Effect of smoke on subcanopy shaded light, canopy temperature, and carbon dioxide uptake in an Amazon rainforest

    E-Print Network [OSTI]

    Doughty, C. E.; Flanner, M. G.; Goulden, M. L.

    2010-01-01

    1997), Measuring and modeling carbon dioxide and water vaportechnique for evalu- ating carbon dioxide exchange rates ofof ecosystem?scale carbon dioxide, water vapor, and energy

  4. Communication in automation, including networking and wireless

    E-Print Network [OSTI]

    Antsaklis, Panos

    Communication in automation, including networking and wireless Nicholas Kottenstette and Panos J and networking in automation is given. Digital communication fundamentals are reviewed and networked control are presented. 1 Introduction 1.1 Why communication is necessary in automated systems Automated systems use

  5. Automating Personalized Battery Management on Smartphones

    E-Print Network [OSTI]

    Falaki, Mohamamd Hossein

    2012-01-01

    3 Automating Battery Management . . . . . . .122 Battery Goal Setting UI . . . . . . . . . . . . . . .Power and Battery Management . . . . . . . . . . . . . . .

  6. Home Network Technologies and Automating Demand Response

    SciTech Connect (OSTI)

    McParland, Charles

    2009-12-01

    Over the past several years, interest in large-scale control of peak energy demand and total consumption has increased. While motivated by a number of factors, this interest has primarily been spurred on the demand side by the increasing cost of energy and, on the supply side by the limited ability of utilities to build sufficient electricity generation capacity to meet unrestrained future demand. To address peak electricity use Demand Response (DR) systems are being proposed to motivate reductions in electricity use through the use of price incentives. DR systems are also be design to shift or curtail energy demand at critical times when the generation, transmission, and distribution systems (i.e. the 'grid') are threatened with instabilities. To be effectively deployed on a large-scale, these proposed DR systems need to be automated. Automation will require robust and efficient data communications infrastructures across geographically dispersed markets. The present availability of widespread Internet connectivity and inexpensive, reliable computing hardware combined with the growing confidence in the capabilities of distributed, application-level communications protocols suggests that now is the time for designing and deploying practical systems. Centralized computer systems that are capable of providing continuous signals to automate customers reduction of power demand, are known as Demand Response Automation Servers (DRAS). The deployment of prototype DRAS systems has already begun - with most initial deployments targeting large commercial and industrial (C & I) customers. An examination of the current overall energy consumption by economic sector shows that the C & I market is responsible for roughly half of all energy consumption in the US. On a per customer basis, large C & I customers clearly have the most to offer - and to gain - by participating in DR programs to reduce peak demand. And, by concentrating on a small number of relatively sophisticated energy consumers, it has been possible to improve the DR 'state of the art' with a manageable commitment of technical resources on both the utility and consumer side. Although numerous C & I DR applications of a DRAS infrastructure are still in either prototype or early production phases, these early attempts at automating DR have been notably successful for both utilities and C & I customers. Several factors have strongly contributed to this success and will be discussed below. These successes have motivated utilities and regulators to look closely at how DR programs can be expanded to encompass the remaining (roughly) half of the state's energy load - the light commercial and, in numerical terms, the more important residential customer market. This survey examines technical issues facing the implementation of automated DR in the residential environment. In particular, we will look at the potential role of home automation networks in implementing wide-scale DR systems that communicate directly to individual residences.

  7. Automated Part Tracking and Metrology Applied to a Manufacturing Process 

    E-Print Network [OSTI]

    Morelli, F.; Halbert, T.; Hignight, M.; Kell, Z.; Lacy, J.; Rasmussen, B. P.

    2013-01-01

    , and increased productivity. This paper presents a case study in enhancing manufacturing operational processes through automated part tracking and metrology. The facility transforms metal powder into precision-hardened, tungsten carbide drill parts on a large..., the initial investment and recurring costs need to be as low as possible. Visual tracking may prove challenging in light of the gray powder used to produce the tungsten-carbide parts. Direct line of sight may also prove difficult when the part carts...

  8. Automating component reuse and adaptation

    E-Print Network [OSTI]

    Alexander, Perry; Morel, B.

    2004-09-01

    framework for automating specification-based component retrieval and adaptation that has been successfully applied to synthesis of software for embedded and digital signal processing systems. Using specifications to abstractly represent implementations...

  9. Automated Assembly Using Feature Localization

    E-Print Network [OSTI]

    Gordon, Steven Jeffrey

    1986-12-01

    Automated assembly of mechanical devices is studies by researching methods of operating assembly equipment in a variable manner; that is, systems which may be configured to perform many different assembly operations ...

  10. Aspects of automation mode confusion

    E-Print Network [OSTI]

    Wheeler, Paul H. (Paul Harrison)

    2007-01-01

    Complex systems such as commercial aircraft are difficult for operators to manage. Designers, intending to simplify the interface between the operator and the system, have introduced automation to assist the operator. In ...

  11. Participation through Automation: Fully Automated Critical Peak Pricing in Commercial Buildings

    E-Print Network [OSTI]

    Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Kiliccote, Sila; Linkugel, Eric

    2006-01-01

    Figure 2. Demand Response Automation Server and BuildingII system to notify the Automation Server of an up comingoccurs day-ahead). 2. The Automation Server posts two pieces

  12. Linking Continuous Energy Management and Open Automated Demand Response

    E-Print Network [OSTI]

    Piette, Mary Ann

    2009-01-01

    Protocol for Building Automation and Control Networks.existing open building automation and control networkingare in use by the Building Automation and Controls Network (

  13. Open Automated Demand Response for Small Commerical Buildings

    E-Print Network [OSTI]

    Dudley, June Han

    2009-01-01

    of Fully Automated Demand  Response in Large Facilities.  Fully Automated Demand Response Tests in Large Facilities.  Open Automated  Demand Response Communication Standards: 

  14. Simplified programming and control of automated radiosynthesizers through unit operations

    E-Print Network [OSTI]

    Claggett, SB; Quinn, KM; Lazari, M; Moore, MD; van Dam, RM

    2013-01-01

    et al. : Simplified programming and control of automatedRM: A new paradigm for programming and controlling automatedOpen Access Simplified programming and control of automated

  15. Automated search for supernovae

    SciTech Connect (OSTI)

    Kare, J.T.

    1984-11-15

    This thesis describes the design, development, and testing of a search system for supernovae, based on the use of current computer and detector technology. This search uses a computer-controlled telescope and charge coupled device (CCD) detector to collect images of hundreds of galaxies per night of observation, and a dedicated minicomputer to process these images in real time. The system is now collecting test images of up to several hundred fields per night, with a sensitivity corresponding to a limiting magnitude (visual) of 17. At full speed and sensitivity, the search will examine some 6000 galaxies every three nights, with a limiting magnitude of 18 or fainter, yielding roughly two supernovae per week (assuming one supernova per galaxy per 50 years) at 5 to 50 percent of maximum light. An additional 500 nearby galaxies will be searched every night, to locate about 10 supernovae per year at one or two percent of maximum light, within hours of the initial explosion.

  16. Smart Lighting Controller!! Smart lighting!

    E-Print Network [OSTI]

    Anderson, Betty Lise

    'll build the circuit! We'll use an LED to represent the room lights! #12;4! Block diagram! Battery! Rail! #12;23! LED: light-emitting diode! Diode conducts current in only one direction! When current flows1! Smart Lighting Controller!! #12;2! Smart lighting! No need to spend energy lighting the room if

  17. Automation in image cytometry : continuous HCS and kinetic image cytometry

    E-Print Network [OSTI]

    Charlot, David J.

    2012-01-01

    OF CALIFORNIA, SAN DIEGO Automation in Image Cytometry:xiv Abstract of Dissertation Automation in Image Cytometry:

  18. Automated Demand Response Opportunities in Wastewater Treatment Facilities

    E-Print Network [OSTI]

    Thompson, Lisa

    2008-01-01

    Interoperable Automated Demand Response Infrastructure,study of automated demand response in wastewater treatmentopportunities for demand response control strategies in

  19. Linking Continuous Energy Management and Open Automated Demand Response

    E-Print Network [OSTI]

    Piette, Mary Ann

    2009-01-01

    Linking Continuous Energy Management and Open AutomatedKeywords: Continuous Energy Management, Automated Demandlinking continuous energy management and continuous

  20. Automated hybridization/imaging device for fluorescent multiplex DNA sequencing

    DOE Patents [OSTI]

    Weiss, Robert B. (Salt Lake City, UT); Kimball, Alvin W. (Salt Lake City, UT); Gesteland, Raymond F. (Salt Lake City, UT); Ferguson, F. Mark (Salt Lake City, UT); Dunn, Diane M. (West Valley City, UT); Di Sera, Leonard J. (Salt Lake City, UT); Cherry, Joshua L. (Salt Lake City, UT)

    1995-01-01

    A method is disclosed for automated multiplex sequencing of DNA with an integrated automated imaging hybridization chamber system. This system comprises an hybridization chamber device for mounting a membrane containing size-fractionated multiplex sequencing reaction products, apparatus for fluid delivery to the chamber device, imaging apparatus for light delivery to the membrane and image recording of fluorescence emanating from the membrane while in the chamber device, and programmable controller apparatus for controlling operation of the system. The multiplex reaction products are hybridized with a probe, then an enzyme (such as alkaline phosphatase) is bound to a binding moiety on the probe, and a fluorogenic substrate (such as a benzothiazole derivative) is introduced into the chamber device by the fluid delivery apparatus. The enzyme converts the fluorogenic substrate into a fluorescent product which, when illuminated in the chamber device with a beam of light from the imaging apparatus, excites fluorescence of the fluorescent product to produce a pattern of hybridization. The pattern of hybridization is imaged by a CCD camera component of the imaging apparatus to obtain a series of digital signals. These signals are converted by the controller apparatus into a string of nucleotides corresponding to the nucleotide sequence an automated sequence reader. The method and apparatus are also applicable to other membrane-based applications such as colony and plaque hybridization and Southern, Northern, and Western blots.

  1. Automated Data Quality Analysis Research and Development 

    E-Print Network [OSTI]

    Sweeney, J., Jr.; Haberl, J. S.

    2002-01-01

    The Automated Data Quality process development is an effort to automate the analysis and monitoring of the Energy Systems Lab's (ESL) polling and energy data process. Polling status refers to basic telecommunication line states, quality of data...

  2. The Automation Of Proof By Mathematical Induction 

    E-Print Network [OSTI]

    Bundy, Alan

    This paper is a chapter of the Handbook of Automated Reasoning edited by Voronkov and Robinson. It describes techniques for automated reasoning in theories containing rules of mathematical induction. Firstly, inductive reasoning is defined and its...

  3. Disciplined agility for process control & automation

    E-Print Network [OSTI]

    Tibazarwa, Augustine

    2009-01-01

    Process automation vendors must consider agility as a basis to gain a competitive edge in innovation. Process Automation systems can impact the operating cost of manufacturing equipment, the safe control of large quantities ...

  4. Automation of Termination: Abstracting CCG through MWG Automation of Termination: Abstracting Calling

    E-Print Network [OSTI]

    Ayala-Rincón, Mauricio

    Automation of Termination: Abstracting CCG through MWG Automation of Termination: Abstracting.Ayala-Rinc´on & C.A.Munoz IX Semin´ario Informal(, mas Formal!) November 29, 2013 1 / 32 #12;Automation science. While classical results state the undecidability of various termination problems, automated

  5. TJ Automation | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EISTJ Automation Jump to: navigation, search Name TJ Automation Facility

  6. Automated Purge Valve Joseph Edward Farrell, III.

    E-Print Network [OSTI]

    Wood, Stephen L.

    Automated Purge Valve by Joseph Edward Farrell, III. Bachelor of Science Marine Engineering the undersigned committee hereby approve the attached thesis Automated Purge Valve by Joseph Edward Farrell, III.D. Department Head Department of Marine and Environmental Systems #12;iii Abstract Title: Automated Purge Valve

  7. Advances in Chromatography, Mass Spectrometry & Lab Automation

    E-Print Network [OSTI]

    Vertes, Akos

    #12;Advances in Chromatography, Mass Spectrometry & Lab Automation 2 Publisher's Note Kevin Davies&EN Media Group 4 Top Ten Chromatography, Mass Spectrometry, and Lab Automation Papers APPLICATION NOTES 10&EN Supplement of 2015: "Advances in Chromatography, Mass Spectrometry, and Lab Automation." This supplement

  8. Workload State Classification With Automation During Simulated

    E-Print Network [OSTI]

    Kaber, David B.

    Workload State Classification With Automation During Simulated Air Traffic Control David B. Kaber to dynamically apply automation to information pro- cessing functions in aviation systems. This research examined manual control or 1 of 4 different forms of automation. Traffic volume was either low (3 aircraft

  9. INTRODUCTION Sophisticated automation is becoming ubiq-

    E-Print Network [OSTI]

    Lee, John D.

    INTRODUCTION Sophisticated automation is becoming ubiq- uitous, appearing in work environments- tion retrieval. Automation is technology that actively selects data, transforms information, makes. On the one hand, people may trust automation even when it is not appro- priate. Pilots, trusting the ability

  10. Comparison lamps automation CTIO 60 inches CHIRON

    E-Print Network [OSTI]

    Tokovinin, Andrei A.

    Comparison lamps automation CTIO 60 inches CHIRON CHI60HF5.2 La Serena, March 16, 2011 #12;Table)...............................................................................12 CTIO 60 inches Chiron / Comparison lamps automation, CHI60HF5.2 2 #12;Introduction The present document is just a brief summary of the work done automating the 60 inches chiron comparison lamps

  11. Comparison lamps automation CTIO 60 inches Echelle

    E-Print Network [OSTI]

    Tokovinin, Andrei A.

    Comparison lamps automation CTIO 60 inches Echelle ECH60S5.1 La Serena, December 09, 2009 #12)...............................................................................12 CTIO 60 inches Echelle / Comparison lamps automation, ECH60S5.1 2 #12;Introduction The present document is just a brief summary of the work done automating the 60 inches echelle comparison lamps

  12. A DISTRIBUTED AUTOMATION SYSTEM FOR ELECTROPHYSICAL INSTALLATIONS

    E-Print Network [OSTI]

    Kozak, Victor R.

    A DISTRIBUTED AUTOMATION SYSTEM FOR ELECTROPHYSICAL INSTALLATIONS V.R. Kozak Budker Institute There was designed a set of devices for automation systems of physical installations. On this basis approach. KEY WORDS Automation, systems, applications, CANBUS, embedded, controller. 1. Introduction Budker

  13. CHANGES IN SHADE, COLOR, AND PATTERN IN FISHES, AND THEIR BEARING ON THE PROBLEMS OF ADAPTATION

    E-Print Network [OSTI]

    . . . . . . . . . . . . . . . . . . . . . . , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184 Black and white background, artificial. . . . . . . . . . . . . . . . . . . .. . . . . . . 191 Colored background, artificial Experiments (B), light from above relatively stronger than normal. . . . . . . . . . . . . . . . 212 Vision

  14. Real time automated inspection

    DOE Patents [OSTI]

    Fant, K.M.; Fundakowski, R.A.; Levitt, T.S.; Overland, J.E.; Suresh, B.R.; Ulrich, F.W.

    1985-05-21

    A method and apparatus are described relating to the real time automatic detection and classification of characteristic type surface imperfections occurring on the surfaces of material of interest such as moving hot metal slabs produced by a continuous steel caster. A data camera transversely scans continuous lines of such a surface to sense light intensities of scanned pixels and generates corresponding voltage values. The voltage values are converted to corresponding digital values to form a digital image of the surface which is subsequently processed to form an edge-enhanced image having scan lines characterized by intervals corresponding to the edges of the image. The edge-enhanced image is thresholded to segment out the edges and objects formed by the edges by interval matching and bin tracking. Features of the objects are derived and such features are utilized to classify the objects into characteristic type surface imperfections. 43 figs.

  15. Automated Quantitative Histomorphometry in Osteoarthritis

    E-Print Network [OSTI]

    Integrator System was designed and developed using standard methods of Object Oriented Analysis and DesignAutomated Quantitative Histomorphometry in Osteoarthritis Eigil Mølvig Jensen Supervised by Bjarne;Technical University of Denmark Informatics and Mathematical Modelling Building 321, DK-2800 Kongens Lyngby

  16. A Decentralized Agent-Based Platform for Automated Trade and its Simulation

    E-Print Network [OSTI]

    Polani, Daniel

    . An extended model of this is presented in MarketSpace (Eriksson et al. [3]). We believe this automated retail markets. Namely, we want to shed light on price developments and the power of seller strategies of di#27 platform is applied to the distributed computation of a multi-agent simulation in a market scenario

  17. Open Automated Demand Response Technologies for Dynamic Pricing and Smart Grid

    E-Print Network [OSTI]

    Ghatikar, Girish

    2010-01-01

    Protocol for Building Automation and Control Networks. ”existing open building automation and control networkingbuildings using open communications and automation

  18. Light Properties Light travels at the speed of light `c'

    E-Print Network [OSTI]

    Mojzsis, Stephen J.

    LIGHT!! #12;Light Properties Light travels at the speed of light `c' C = 3 x 108 m/s Or 190,000 miles/second!! Light could travel around the world about 8 times in one second #12;What is light?? Light is a "wave packet" A photon is a "light particle" #12;Electromagnetic Radiation and You Light is sometimes

  19. Impact of Fixed Exterior Shading on Daylighting: A Case Study of the David Brower Center

    E-Print Network [OSTI]

    Zelenay, Krystyna

    2011-01-01

    lighting for work. Applied Ergonomics, 37(4), 461-466. doi:in Buildings. ” Applied Ergonomics, 3(4), 206-215. 29.in Occupational Ergonomics and Safety I: Proceedings of the

  20. Automated nutrient analyses in seawater

    SciTech Connect (OSTI)

    Whitledge, T.E.; Malloy, S.C.; Patton, C.J.; Wirick, C.D.

    1981-02-01

    This manual was assembled for use as a guide for analyzing the nutrient content of seawater samples collected in the marine coastal zone of the Northeast United States and the Bering Sea. Some modifications (changes in dilution or sample pump tube sizes) may be necessary to achieve optimum measurements in very pronounced oligotrophic, eutrophic or brackish areas. Information is presented under the following section headings: theory and mechanics of automated analysis; continuous flow system description; operation of autoanalyzer system; cookbook of current nutrient methods; automated analyzer and data analysis software; computer interfacing and hardware modifications; and trouble shooting. The three appendixes are entitled: references and additional reading; manifold components and chemicals; and software listings. (JGB)

  1. Automation of Capacity Bidding with an Aggregator Using Open Automated Demand Response

    E-Print Network [OSTI]

    Kiliccote, Sila

    2011-01-01

    and industrial facilities.   The long?term vision is to embed the  automation Industrial/Agricultural/Water End?Use Energy Efficiency  Renewable Energy Technologies  Transportation  The Automation 

  2. Automation of Capacity Bidding with an Aggregator Using Open Automated Demand Response

    E-Print Network [OSTI]

    Kiliccote, Sila

    2011-01-01

    program, demand  response aggregator, demand response  vii WITH AN AGGREGATOR USING OPEN AUTOMATED DEMAND RESPONSE ThisWith an Aggregator Using Open Automated Demand Response is 

  3. Powder handling for automated fuel processing

    SciTech Connect (OSTI)

    Frederickson, J.R.; Eschenbaum, R.C.; Goldmann, L.H.

    1989-04-09

    Installation of the Secure Automated Fabrication (SAF) line has been completed. It is located in the Fuel Cycle Plant (FCP) at the Department of Energy's (DOE) Hanford site near Richland, Washington. The SAF line was designed to fabricate advanced reactor fuel pellets and assemble fuel pins by automated, remote operation. This paper describes powder handling equipment and techniques utilized for automated powder processing and powder conditioning systems in this line. 9 figs.

  4. The effects of level of automation and adaptive automation on human performance, situation awareness and workload in a

    E-Print Network [OSTI]

    Kaber, David B.

    The effects of level of automation and adaptive automation on human performance, situation., 4731 East Forest Peak, Marietta, GA 30066, USA Keywords: Level of automation (LOA); adaptive automation of automation (LOAs) for maintaining operator involvement in complex systems control and facilitating situation

  5. Automating Datacenter Operations Using Machine Learning

    E-Print Network [OSTI]

    Bodik, Peter

    2010-01-01

    4 Fingerprinting the Datacenter: Automated Classification of6.2.2 Trusting SML in Datacenter Operations . . . . . .in the datacenter under study. . . . . . . . . . . . . ROC

  6. Safety Analysis Of Automated Highway Systems

    E-Print Network [OSTI]

    Leveson, Nancy G.

    1997-01-01

    Lee. Towards an automated fmea assis- tant. In Applicationsmodes and effects analysis (FMEA) is employed to determineof multiple failures. ) FMEA was developed Potential Part

  7. Automated Surface Observing System: Standby Power Options

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    contained group of sensors and data gathering equipment that produces an automated weather observation * Weather observations support aviation, climate data, non government...

  8. Automated High Throughput Drug Target Crystallography

    SciTech Connect (OSTI)

    Rupp, B

    2005-02-18

    The molecular structures of drug target proteins and receptors form the basis for 'rational' or structure guided drug design. The majority of target structures are experimentally determined by protein X-ray crystallography, which as evolved into a highly automated, high throughput drug discovery and screening tool. Process automation has accelerated tasks from parallel protein expression, fully automated crystallization, and rapid data collection to highly efficient structure determination methods. A thoroughly designed automation technology platform supported by a powerful informatics infrastructure forms the basis for optimal workflow implementation and the data mining and analysis tools to generate new leads from experimental protein drug target structures.

  9. REMOTE LABORATORIES IN AUTOMATION: AIP-PRIMECA RAO ARI PLATFORM Remote Laboratories in Automation

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    for thorough trainings in industrial We thank our sponsors : Schneider Electric which provided the automationREMOTE LABORATORIES IN AUTOMATION: AIP-PRIMECA RAO ARI PLATFORM Remote Laboratories in Automation of resources and competencies about industrial topics for many universities in Rhône-Alpes french Region. Due

  10. Architectures of Test Automation Copyright Cem Kaner, 2000. All rights reserved. 1 Architectures of Test Automation

    E-Print Network [OSTI]

    Architectures of Test Automation Copyright © Cem Kaner, 2000. All rights reserved. 1 Architectures of Test Automation Copyright © August, 2000 Cem Kaner, kaner@kaner.com Acknowledgement Many of the ideas in this presentation were jointly developed with Doug Hoffman, in a course that we taught together on test automation

  11. Chan. Automated Composer of Style Sensitive Music AUTOMATED COMPOSER OF STYLE SENSITIVE MUSIC

    E-Print Network [OSTI]

    Rubinstein, Benjamin

    Chan. Automated Composer of Style Sensitive Music AUTOMATED COMPOSER OF STYLE SENSITIVE MUSIC: Although much effort has been devoted to automating music composition through a variety of algorithms and methods, the resulting works seldom imitate musical style. This paper draws on existing ideas to propose

  12. Cerenkov Light

    ScienceCinema (OSTI)

    Slifer, Karl

    2014-05-22

    The bright blue glow from nuclear reactors is Cerenkov light. Karl Slifer describes how nuclear physicists can use this phenomenon to study the nucleus of the atom.

  13. Cerenkov Light

    SciTech Connect (OSTI)

    Slifer, Karl

    2013-06-13

    The bright blue glow from nuclear reactors is Cerenkov light. Karl Slifer describes how nuclear physicists can use this phenomenon to study the nucleus of the atom.

  14. Lighting Renovations

    Broader source: Energy.gov [DOE]

    When undertaking a lighting renovation in a Federal building, daylighting is the primary renewable energy opportunity. Photovoltaics (PV) also present an excellent opportunity. While this guide...

  15. Open Automated Demand Response for Small Commerical Buildings

    E-Print Network [OSTI]

    Dudley, June Han

    2009-01-01

    Protocol for Building  Automation and Control Networks.  to small buildings owners to enable automation of DR.   7.0for small buildings owners to  enable automation of DR can 

  16. Automated Critical Peak Pricing Field Tests: Program Description and Results

    E-Print Network [OSTI]

    Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila; Xu, Peng

    2006-01-01

    Jose Espudo C&C Building Automation: Mark Johnson and ThomasAssistance from Building Automation and Controls CompaniesSyserco, Yamas and C&C Building Automation. LBNL met with

  17. Automated audiometry using Apple iOS-based application technology

    E-Print Network [OSTI]

    Foulad, A; Bui, P; Djalilian, H

    2013-01-01

    Automated Audiometry Using Apple iOS-Based ApplicationAutomated Audiometry Using Apple iOS-Based Applicationthe feasibility of an Apple iOS-based automated hearing

  18. Human-automation interaction for lunar landing aimpoint redesignation

    E-Print Network [OSTI]

    Needham, Jennifer M

    2008-01-01

    Human-automation interactions are a critical area of research in systems with modem automation. The decision-making portion of tasks presents a special challenge for human-automation interactions because of the many factors ...

  19. Open Automated Demand Response for Small Commerical Buildings

    SciTech Connect (OSTI)

    Dudley, June Han; Piette, Mary Ann; Koch, Ed; Hennage, Dan

    2009-05-01

    This report characterizes small commercial buildings by market segments, systems and end-uses; develops a framework for identifying demand response (DR) enabling technologies and communication means; and reports on the design and development of a low-cost OpenADR enabling technology that delivers demand reductions as a percentage of the total predicted building peak electric demand. The results show that small offices, restaurants and retail buildings are the major contributors making up over one third of the small commercial peak demand. The majority of the small commercial buildings in California are located in southern inland areas and the central valley. Single-zone packaged units with manual and programmable thermostat controls make up the majority of heating ventilation and air conditioning (HVAC) systems for small commercial buildings with less than 200 kW peak electric demand. Fluorescent tubes with magnetic ballast and manual controls dominate this customer group's lighting systems. There are various ways, each with its pros and cons for a particular application, to communicate with these systems and three methods to enable automated DR in small commercial buildings using the Open Automated Demand Response (or OpenADR) communications infrastructure. Development of DR strategies must consider building characteristics, such as weather sensitivity and load variability, as well as system design (i.e. under-sizing, under-lighting, over-sizing, etc). Finally, field tests show that requesting demand reductions as a percentage of the total building predicted peak electric demand is feasible using the OpenADR infrastructure.

  20. Automated fuel pin loading system

    DOE Patents [OSTI]

    Christiansen, David W. (Kennewick, WA); Brown, William F. (West Richland, WA); Steffen, Jim M. (Richland, WA)

    1985-01-01

    An automated loading system for nuclear reactor fuel elements utilizes a gravity feed conveyor which permits individual fuel pins to roll along a constrained path perpendicular to their respective lengths. The individual lengths of fuel cladding are directed onto movable transports, where they are aligned coaxially with the axes of associated handling equipment at appropriate production stations. Each fuel pin can be reciprocated axially and/or rotated about its axis as required during handling steps. The fuel pins are inserted as a batch prior to welding of end caps by one of two disclosed welding systems.

  1. DOLFIN: Automated finite element computing

    E-Print Network [OSTI]

    Logg, Anders; Wells, G N

    2009-02-25

    , and in particular the C++ Technical Report 1 (TR1) std::tr1::shared ptr and Boost boost:shared ptr (DOLFIN currently uses boost:shared ptr since this is better supported by SWIG than is std::tr1::shared ptr). In managing data sharing, this solution has reduced... . DOLFIN: Automated Finite Element Computing · 7 3. DESIGN CONSIDERATIONS The successful development of DOLFIN has been driven by two keys factors. The first is striving for technical innovation. Examples of this include the use of a form compiler...

  2. Test for Modeling Windows in DOE 2.1E for Comparing the Window Library with the Shading Coefficient Method for a Single-Family Residence in Texas 

    E-Print Network [OSTI]

    Kim, S.; Haberl, J. S.

    2008-07-18

    This study examines the difference of the window simulation test between the Shading Coefficient (SC) and the Window Library (WL) Methods on DOE 2.1E of the 2000 IECC (International Energy Conservation Code) for single-family residences in Texas...

  3. ISA Approves Standard for Wireless Automation in Process Control...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official...

  4. Multiplex automated genome engineering Church, George M; Wang...

    Office of Scientific and Technical Information (OSTI)

    Multiplex automated genome engineering Church, George M; Wang, Harris H; Isaacs, Farren J The present invention relates to automated methods of introducing multiple nucleic acid...

  5. Small- and Medium-Size Building Automation and Control System...

    Energy Savers [EERE]

    Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Emerging...

  6. Reference Model for Control and Automation Systems in Electrical...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Model for Control and Automation Systems in Electrical Power (October 2005) Reference Model for Control and Automation Systems in Electrical Power (October 2005) Modern...

  7. Open Automated Demand Response Dynamic Pricing Technologies and Demonstration

    E-Print Network [OSTI]

    Ghatikar, Girish

    2010-01-01

    Goodin. 2009. “Open Automated Demand Response Communicationsin Demand Response for Wholesale Ancillary Services. ” InOpen Automated Demand Response Demonstration Project. LBNL-

  8. Open Automated Demand Response Communications Specification (Version 1.0)

    E-Print Network [OSTI]

    Piette, Mary Ann

    2009-01-01

    and Techniques for Demand Response. May 2007. LBNL-59975.to facilitate automating  demand response actions at the Interoperable Automated Demand Response Infrastructure,

  9. Results and commissioning issues from an automated demand response pilot

    E-Print Network [OSTI]

    Piette, Mary Ann; Watson, Dave; Sezgen, Osman; Motegi, Naoya

    2004-01-01

    of Fully Automated Demand Response in Large Facilities"Management and Demand Response in Commercial Buildings", L Band Commissioning Issues from an Automated Demand Response.

  10. V-132: IBM Tivoli System Automation Application Manager Multiple...

    Broader source: Energy.gov (indexed) [DOE]

    IBM has acknowledged multiple vulnerabilities in IBM Tivoli System Automation Application Manager PLATFORM: The vulnerabilities are reported in IBM Tivoli System Automation...

  11. V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities July 29, 2013...

  12. Building America Expert Meeting: Minutes from Automated Home...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Minutes from Automated Home Energy Management System Building America Expert Meeting: Minutes from Automated Home Energy Management System These meeting minutes are from the U.S....

  13. Global health response more accurate with automated influenza...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Global health response more accurate with automated influenza surveillance Global health response more accurate with automated influenza surveillance Public health officials will...

  14. QER- Comment of Iviti Lighting Limited

    Broader source: Energy.gov [DOE]

    Sir/Madam, I am not a stakeholder but I think I could help with information that may add to the discussion for the Quadrennial Energy Review. It may appear just like any sales pitch but have a read through, please. Our Company, Iviti Lighting has developed Real Time Demand Grid Monitoring technology which we call 'Automated Demand Response' (ADR). The invention, design, testing and manufacturing is all U.K. based.

  15. Patterns for Refinement Automation Alexei Iliasov1

    E-Print Network [OSTI]

    Southampton, University of

    Patterns for Refinement Automation Alexei Iliasov1 , Elena Troubitsyna2 , Linas Laibinis2 in rigorous modelling and design by increasing automation of development steps. We introduce a notion establishes a basis for building a tool that would support formal system development via pattern reuse

  16. Partial Revelation Automated Mechanism Design Nathanael Hyafil

    E-Print Network [OSTI]

    Boutilier, Craig

    Partial Revelation Automated Mechanism Design Nathana¨el Hyafil Department of Computer Science mechanism design settings, optimal general-purpose mechanisms are not known. Thus the automated design techniques for au- tomated mechanism design (AMD) require the revelation of full utility information from

  17. Automated Filament Finding and Selection from Cryo

    E-Print Network [OSTI]

    Illinois at Urbana-Champaign, University of

    Automated Filament Finding and Selection from Cryo Electron Micrographs Y. Zhu, B. Carragher, and C N Mathews Urbana, IL 61801 techreports@itg.uiuc.edu http://www.itg.uiuc.edu #12;AUTOMATED FILAMENT and selecting filamentous structures from images of this kind. Images are acquired in defocus pairs; a near

  18. Demand Response and Open Automated Demand Response

    E-Print Network [OSTI]

    LBNL-3047E Demand Response and Open Automated Demand Response Opportunities for Data Centers G described in this report was coordinated by the Demand Response Research Center and funded by the California. Demand Response and Open Automated Demand Response Opportunities for Data Centers. California Energy

  19. Automated evaluation of generalized topographic maps

    E-Print Network [OSTI]

    in their production lines. Map generalization inevitably changes certain aspects (accuracy, com- pleteness, etcAutomated evaluation of generalized topographic maps -- supported by formalization and data of the author. #12;AUTOMATED EVALUATION OF GENERALIZED TOPOGRAPHIC MAPS -- SUPPORTED BY FORMALIZATION AND DATA

  20. PeopleSoft HR ECR Automation Process

    E-Print Network [OSTI]

    Huang, Jianyu

    Term Disability with Pay ECR Search Page To process a Short Term Disability using the automated ECR. 2. Enter the Effective Date of the Short Term Disability. This is the Effective DatePeopleSoft HR ECR Automation Process Short Term Disability with Pay May 2011 #12;Processing a Short

  1. Development and evaluation of an automated reflectance microscope system for the petrographic characterization of bituminous coals

    SciTech Connect (OSTI)

    Hoover, D. S.; Davis, A.

    1980-10-01

    The development of automated coal petrographic techniques will lessen the demands on skilled personnel to do routine work. This project is concerned with the development and successful testing of an instrument which will meet these needs. The fundamental differences in reflectance of the three primary maceral groups should enable their differentiation in an automated-reflectance frequency histogram (reflectogram). Consequently, reflected light photometry was chosen as the method for automating coal petrographic analysis. Three generations of an automated system (called Rapid Scan Versions I, II and III) were developed and evaluated for petrographic analysis. Their basic design was that of a reflected-light microscope photometer with an automatic stage, interfaced with a minicomputer. The hardware elements used in the Rapid Scan Version I limited the system's flexibility and presented problems with signal digitization and measurement precision. Rapid Scan Version II was designed to incorporate a new microscope photometer and computer system. A digital stepping stage was incorporated into the Rapid Scan Version III system. The precision of reflectance determination of this system was found to be +- 0.02 percent reflectance. The limiting factor in quantitative interpretation of Rapid Scan reflectograms is the resolution of reflectance populations of the individual maceral groups. Statistical testing indicated that reflectograms were highly reproducible, and a new computer program, PETAN, was written to interpret the curves for vitrinite reflectance parameters ad petrographic.

  2. Automated Fresnel lens tester system

    SciTech Connect (OSTI)

    Phipps, G.S.

    1981-07-01

    An automated data collection system controlled by a desktop computer has been developed for testing Fresnel concentrators (lenses) intended for solar energy applications. The system maps the two-dimensional irradiance pattern (image) formed in a plane parallel to the lens, whereas the lens and detector assembly track the sun. A point detector silicon diode (0.5-mm-dia active area) measures the irradiance at each point of an operator-defined rectilinear grid of data positions. Comparison with a second detector measuring solar insolation levels results in solar concentration ratios over the image plane. Summation of image plane energies allows calculation of lens efficiencies for various solar cell sizes. Various graphical plots of concentration ratio data help to visualize energy distribution patterns.

  3. The Gesture Pendant: A Self-illuminating, Wearable, Infrared Computer Vision System for Home Automation Control and Medical Monitoring

    E-Print Network [OSTI]

    Starner, Thad E.

    such as home entertainment equipment and the room light- ing can be controlled with simple movementsThe Gesture Pendant: A Self-illuminating, Wearable, Infrared Computer Vision System for Home of home automation systems via hand gestures. This solu- tion has many advantages over traditional home

  4. Automated soil respiration measurements: new information, opportunities and challenges

    E-Print Network [OSTI]

    Vargas, R.; Carbone, M. S.

    2008-01-01

    information, opportunities, and challenges Automated Soil Respiration Workshop – a Terrestrial Ecosystem

  5. Fueling Robot Automates Hydrogen Hose Reliability Testing (Fact Sheet)

    SciTech Connect (OSTI)

    Harrison, K.

    2014-01-01

    Automated robot mimics fueling action to test hydrogen hoses for durability in real-world conditions.

  6. Linking Continuous Energy Management and Open Automated Demand Response

    E-Print Network [OSTI]

    Piette, Mary Ann

    2009-01-01

    building automation and control networking protocols to facilitate integration of utility/ISO information systems

  7. Lighting in the Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    by your library lights E Kilowatt-hours consumed by your library lights F Annual cost of operating your library lights H Current lighting index for your library ...

  8. Light's Darkness

    ScienceCinema (OSTI)

    Padgett, Miles [University of Glasgow, Glasgow, Scotland

    2010-01-08

    Optical vortices and orbital angular momentum are currently topical subjects in the optics literature. Although seemingly esoteric, they are, in fact, the generic state of light and arise whenever three or more plane waves interfere. To be observed by eye the light must be monochromatic. Laser speckle is one such example, where the optical energy circulates around each black spot, giving a local orbital angular momentum. This talk with report three on-going studies. First, when considering a volume of interfering waves, the laser specs map out threads of complete darkness embedded in the light. Do these threads form loops? Links? Or even knots? Second, when looking through a rapidly spinning window, the image of the world on the other side is rotated: true or false? Finally, the entanglement of orbital angular momentum states means measuring how the angular position of one photons sets the angular momentum of another: is this an angular version of the EPR (Einstein, Podolsky, and Rosen) paradox?

  9. 2008 ICNS Conference, 5-7 May 2008 Automated Tool for Task Analysis of NextGen Automation

    E-Print Network [OSTI]

    2008 ICNS Conference, 5-7 May 2008 1 Automated Tool for Task Analysis of NextGen Automation Lance describes the emergence of a new class of tools to automate the evaluation of procedures and training, will require the rapid addition of new functions in the automation found on the flightdeck of commercial

  10. AUTOMATIC MAPPING FROM ULTRA-LIGHT UAV IMAGERY Christoph Strecha a,b

    E-Print Network [OSTI]

    Fua, Pascal

    AUTOMATIC MAPPING FROM ULTRA-LIGHT UAV IMAGERY Christoph Strecha a,b , Olivier Küng a,b and Pascal.kueng@pix4d.com) KEY WORDS: UAV, mapping, ortho-image, DSM, Structure and Motion ABSTRACT: This paper presents an affordable, fully automated and accurate mapping solutions based on ultra-light UAV imagery

  11. Automated intrusion recovery for web applications

    E-Print Network [OSTI]

    Chandra, Ramesh, Ph. D. Massachusetts Institute of Technology

    2013-01-01

    In this dissertation, we develop recovery techniques for web applications and demonstrate that automated recovery from intrusions and user mistakes is practical as well as effective. Web applications play a critical role ...

  12. Improved Usability of Aviation Automation Through Direct

    E-Print Network [OSTI]

    Kaber, David B.

    Improved Usability of Aviation Automation Through Direct Manipulation and Graphical User Interface Design David B. Kaber and Jennifer M. Riley Department of Industrial Engineering North Carolina State University Kheng-Wooi Tan Department of Industrial Engineering Mississippi State University Problems

  13. Design of an automated cocktail mixing experience

    E-Print Network [OSTI]

    Aguirre, Alejandro, S.B. Massachusetts Institute of Technology

    2013-01-01

    This thesis describes the design concept development of an automated cocktail mixing device and user interface that is capable of dispensing a variety of alcoholic and non-alcoholic ingredients to produce a myriad of drink ...

  14. Proof Planning for Automating Hardware Verification 

    E-Print Network [OSTI]

    Cantu-Ortiz, Francisco Javier

    In this thesis we investigate the applicability of proof planning to automate the verification of hardware systems. Proof planning is a meta-level reasoning technique which captures patterns of proof common to a family of theorems. It contributes...

  15. Automation, Energy Conservation and Common Sense 

    E-Print Network [OSTI]

    Hester, D.

    1981-01-01

    and contains 5 million square feet of administration office and research laboratory space. An Engineering study to investigate an automated computer controlled energy management system has been completed. The study objectives were to identify system parameters...

  16. Shared Authority Concerns in Automated Driving Applications

    E-Print Network [OSTI]

    Cummings, M.L.

    2014-05-13

    Given the move toward driverless cars, which includes the more short-term goal of driving assistance, what the appropriate shared authority and interaction paradigms should be between human drivers and the automation remains ...

  17. Types of Lights Types of Lights

    E-Print Network [OSTI]

    1 Types of Lights Types of Lights q So far we have studied point lights ­ Radiate in all direc7ons q Other lights ­ Direc7onal lights (posi7on-independent) ­ Spotlights #12;2 Direc1onal Lights q Shine in a single, uniform direc7on q All rays

  18. AUTOMATED, HIGHLY ACCURATE VERIFICATION OF RELAP5-3D

    SciTech Connect (OSTI)

    George L Mesina; David Aumiller; Francis Buschman

    2014-07-01

    Computer programs that analyze light water reactor safety solve complex systems of governing, closure and special process equations to model the underlying physics. In addition, these programs incorporate many other features and are quite large. RELAP5-3D[1] has over 300,000 lines of coding for physics, input, output, data management, user-interaction, and post-processing. For software quality assurance, the code must be verified and validated before being released to users. Verification ensures that a program is built right by checking that it meets its design specifications. Recently, there has been an increased importance on the development of automated verification processes that compare coding against its documented algorithms and equations and compares its calculations against analytical solutions and the method of manufactured solutions[2]. For the first time, the ability exists to ensure that the data transfer operations associated with timestep advancement/repeating and writing/reading a solution to a file have no unintended consequences. To ensure that the code performs as intended over its extensive list of applications, an automated and highly accurate verification method has been modified and applied to RELAP5-3D. Furthermore, mathematical analysis of the adequacy of the checks used in the comparisons is provided.

  19. Light Computing

    E-Print Network [OSTI]

    Gordon Chalmers

    2006-10-13

    A configuration of light pulses is generated, together with emitters and receptors, that allows computing. The computing is extraordinarily high in number of flops per second, exceeding the capability of a quantum computer for a given size and coherence region. The emitters and receptors are based on the quantum diode, which can emit and detect individual photons with high accuracy.

  20. Sun Safety Is Made in the Shade Watch the clock. Avoid the sun as much as possible between 10:00 a.m. and 3:00 p.m.

    E-Print Network [OSTI]

    Sun Safety Is Made in the Shade Watch the clock. Avoid the sun as much as possible between 10:00 a.S. Department of Agriculture, and the County Commissioners Courts of Texas Cooperating Sun Safety Is Made in the Shade Watch the clock. Avoid the sun as much as possible between 10:00 a.m. and 3:00 p.m. Use sunblock

  1. Automating Oceanography: A Robotic Surface Sensor Platform Combining Flexibility and Low-cost

    E-Print Network [OSTI]

    Mairs, Bryant

    2015-01-01

    sea-air interactions. In Robotics and Automation, 2005. ICRAemission monitoring. In Robotics and Automation (ICRA), 2010using a profiling sonar. In Robotics and Automation (ICRA),

  2. Findings from Seven Years of Field Performance Data for Automated Demand Response in Commercial Buildings

    E-Print Network [OSTI]

    Kiliccote, Sila

    2010-01-01

    In cases where a building automation system is notyears. Automation guarantees that each building is operatedstreamline automation by providing guidance on DR building

  3. Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings

    E-Print Network [OSTI]

    Piette, Mary Ann

    2010-01-01

    such as CEC, EPRI, Building Automation Control Network (is the lack of automation of building systems. Most DRresponse, automation, commercial, industrial buildings, peak

  4. Automated Critical Peak Pricing Field Tests: 2006 Pilot Program Description and Results

    E-Print Network [OSTI]

    Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila

    2007-01-01

    and industrial facilities), further developing the DR Automation of industrial process control systems for  automation.  of  industrial process control  systems for automation.  

  5. Explorations of Space-Charge Limits in Parallel-Plate Diodes and Associated Techniques for Automation

    E-Print Network [OSTI]

    Ragan-Kelley, Benjamin

    2013-01-01

    and Associated Techniques for Automation by Benjamin Ragan-and Associated Techniques for Automation Copyright 2013 byand Associated Techniques for Automation by Benjamin Ragan-

  6. Demonstration of Datacenter Automation Software and Hardware (DASH) at the California Franchise Tax Board

    E-Print Network [OSTI]

    Bell, Geoffrey C.

    2010-01-01

    of Datacenter Automation Software and Hardware (DASH) at theof Datacenter Automation Software and Hardware (DASH) at theprotocol for building automation and control networks. It is

  7. Analysis of Open Automated Demand Response Deployments in California and Guidelines to Transition to Industry Standards

    E-Print Network [OSTI]

    Ghatikar, Girish

    2014-01-01

    to  Automated  Demand   Response  and  the  OpenADR  ®  Automated  Demand  Response  Program.   https://Data  for  Automated  Demand  Response  in  Commercial  

  8. Open Automated Demand Response Technologies for Dynamic Pricing and Smart Grid

    E-Print Network [OSTI]

    Ghatikar, Girish

    2010-01-01

    for Automated Demand Response in Commercial Buildings. ” In2010. “Open Automated Demand Response Dynamic Pricing2009. “Open Automated Demand Response Communications

  9. Analysis of Open Automated Demand Response Deployments in California and Guidelines to Transition to Industry Standards

    E-Print Network [OSTI]

    Ghatikar, Girish

    2014-01-01

    to  Automated  Demand   Response  and  the  OpenADR  ®  Automated  Demand  Response  Program.   https://2009a.   Open  Automated  Demand  Response  Communications  

  10. Northwest Open Automated Demand Response Technology Demonstration Project

    SciTech Connect (OSTI)

    Kiliccote, Sila; Piette, Mary Ann; Dudley, Junqiao

    2010-03-17

    The Lawrence Berkeley National Laboratory (LBNL) Demand Response Research Center (DRRC) demonstrated and evaluated open automated demand response (OpenADR) communication infrastructure to reduce winter morning and summer afternoon peak electricity demand in commercial buildings the Seattle area. LBNL performed this demonstration for the Bonneville Power Administration (BPA) in the Seattle City Light (SCL) service territory at five sites: Seattle Municipal Tower, Seattle University, McKinstry, and two Target stores. This report describes the process and results of the demonstration. OpenADR is an information exchange model that uses a client-server architecture to automate demand-response (DR) programs. These field tests evaluated the feasibility of deploying fully automated DR during both winter and summer peak periods. DR savings were evaluated for several building systems and control strategies. This project studied DR during hot summer afternoons and cold winter mornings, both periods when electricity demand is typically high. This is the DRRC project team's first experience using automation for year-round DR resources and evaluating the flexibility of commercial buildings end-use loads to participate in DR in dual-peaking climates. The lessons learned contribute to understanding end-use loads that are suitable for dispatch at different times of the year. The project was funded by BPA and SCL. BPA is a U.S. Department of Energy agency headquartered in Portland, Oregon and serving the Pacific Northwest. BPA operates an electricity transmission system and markets wholesale electrical power at cost from federal dams, one non-federal nuclear plant, and other non-federal hydroelectric and wind energy generation facilities. Created by the citizens of Seattle in 1902, SCL is the second-largest municipal utility in America. SCL purchases approximately 40% of its electricity and the majority of its transmission from BPA through a preference contract. SCL also provides ancillary services within its own balancing authority. The relationship between BPA and SCL creates a unique opportunity to create DR programs that address both BPA's and SCL's markets simultaneously. Although simultaneously addressing both market could significantly increase the value of DR programs for BPA, SCL, and the end user, establishing program parameters that maximize this value is challenging because of complex contractual arrangements and the absence of a central Independent System Operator or Regional Transmission Organization in the northwest.

  11. Automated Parallel Capillary Electrophoretic System

    DOE Patents [OSTI]

    Li, Qingbo (State College, PA); Kane, Thomas E. (State College, PA); Liu, Changsheng (State College, PA); Sonnenschein, Bernard (Brooklyn, NY); Sharer, Michael V. (Tyrone, PA); Kernan, John R. (Loganton, PA)

    2000-02-22

    An automated electrophoretic system is disclosed. The system employs a capillary cartridge having a plurality of capillary tubes. The cartridge has a first array of capillary ends projecting from one side of a plate. The first array of capillary ends are spaced apart in substantially the same manner as the wells of a microtitre tray of standard size. This allows one to simultaneously perform capillary electrophoresis on samples present in each of the wells of the tray. The system includes a stacked, dual carousel arrangement to eliminate cross-contamination resulting from reuse of the same buffer tray on consecutive executions from electrophoresis. The system also has a gel delivery module containing a gel syringe/a stepper motor or a high pressure chamber with a pump to quickly and uniformly deliver gel through the capillary tubes. The system further includes a multi-wavelength beam generator to generate a laser beam which produces a beam with a wide range of wavelengths. An off-line capillary reconditioner thoroughly cleans a capillary cartridge to enable simultaneous execution of electrophoresis with another capillary cartridge. The streamlined nature of the off-line capillary reconditioner offers the advantage of increased system throughput with a minimal increase in system cost.

  12. MASS: An automated accountability system

    SciTech Connect (OSTI)

    Erkkila, B.H.; Kelso, F.

    1994-08-01

    All Department of Energy contractors who manage accountable quantities of nuclear materials are required to implement an accountability system that tracks, and records the activities associated with those materials. At Los Alamos, the automated accountability system allows data entry on computer terminals and data base updating as soon as the entry is made. It is also able to generate all required reports in a timely Fashion. Over the last several years, the hardware and software have been upgraded to provide the users with all the capability needed to manage a large variety of operations with a wide variety of nuclear materials. Enhancements to the system are implemented as the needs of the users are identified. The system has grown with the expanded needs of the user; and has survived several years of changing operations and activity. The user community served by this system includes processing, materials control and accountability, and nuclear material management personnel. In addition to serving the local users, the accountability system supports the national data base (NMMSS). This paper contains a discussion of several details of the system design and operation. After several years of successful operation, this system provides an operating example of how computer systems can be used to manage a very dynamic data management problem.

  13. Findings from Seven Years of Field Performance Data for Automated Demand Response in Commercial Buildings

    SciTech Connect (OSTI)

    Kiliccote, Sila; Piette, Mary Ann; Mathieu, Johanna; Parrish, Kristen

    2010-05-14

    California is a leader in automating demand response (DR) to promote low-cost, consistent, and predictable electric grid management tools. Over 250 commercial and industrial facilities in California participate in fully-automated programs providing over 60 MW of peak DR savings. This paper presents a summary of Open Automated DR (OpenADR) implementation by each of the investor-owned utilities in California. It provides a summary of participation, DR strategies and incentives. Commercial buildings can reduce peak demand from 5 to 15percent with an average of 13percent. Industrial facilities shed much higher loads. For buildings with multi-year savings we evaluate their load variability and shed variability. We provide a summary of control strategies deployed, along with costs to install automation. We report on how the electric DR control strategies perform over many years of events. We benchmark the peak demand of this sample of buildings against their past baselines to understand the differences in building performance over the years. This is done with peak demand intensities and load factors. The paper also describes the importance of these data in helping to understand possible techniques to reach net zero energy using peak day dynamic control capabilities in commercial buildings. We present an example in which the electric load shape changed as a result of a lighting retrofit.

  14. Appendix III to OMB Circular No. A-130 -Security of Federal Automated Information Resources

    E-Print Network [OSTI]

    Appendix III to OMB Circular No. A-130 - Security of Federal Automated Information Resources A automated information security programs; assigns Federal agency responsibilities for the security of automated information; and links agency automated information security programs and agency management

  15. Automated Continuous Commissioning of Commercial Buildings

    E-Print Network [OSTI]

    Bailey, Trevor

    2013-01-01

    areas in BLDG26. The lighting power density (W/m2) used forthe Drill hall. The lighting power density (W/m2) used for

  16. Residential Lighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMassR&D100Nationalquestionnaires 0 Averagequestionnaires 7tniLighting Sign In

  17. LED Lighting Basics

    Broader source: Energy.gov [DOE]

    Light-Emitting diodes (LEDs) efficiently produce light in a fundamentally different way than any legacy or traditional source of light.

  18. Automated imaging system for single molecules

    DOE Patents [OSTI]

    Schwartz, David Charles; Runnheim, Rodney; Forrest, Daniel

    2012-09-18

    There is provided a high throughput automated single molecule image collection and processing system that requires minimal initial user input. The unique features embodied in the present disclosure allow automated collection and initial processing of optical images of single molecules and their assemblies. Correct focus may be automatically maintained while images are collected. Uneven illumination in fluorescence microscopy is accounted for, and an overall robust imaging operation is provided yielding individual images prepared for further processing in external systems. Embodiments described herein are useful in studies of any macromolecules such as DNA, RNA, peptides and proteins. The automated image collection and processing system and method of same may be implemented and deployed over a computer network, and may be ergonomically optimized to facilitate user interaction.

  19. INSTRUMENTATION OF VIDEO GAME SOFTWARE TO SUPPORT AUTOMATED CONTENT ANALYSES

    E-Print Network [OSTI]

    Katchabaw, Michael James

    INSTRUMENTATION OF VIDEO GAME SOFTWARE TO SUPPORT AUTOMATED CONTENT ANALYSES T. Bullen and M, automated content analysis, software instrumentation, Unreal Engine. ABSTRACT Content analysis of video content analyses for video games through the use of software instrumentation. By properly instrumenting

  20. Automated Battery Swap and Recharge to Enable Persistent UAV Missions

    E-Print Network [OSTI]

    Toksoz, Tuna

    This paper introduces a hardware platform for automated battery changing and charging for multiple UAV agents. The automated station holds a bu er of 8 batteries in a novel dual-drum structure that enables a "hot" battery ...

  1. NEW INDUSTRIAL AUTOMATION LABORATORY & COURSES ECET TECHONOLOGY PROGRAM ADVANCEMENT

    E-Print Network [OSTI]

    Allen, Gale

    Paper #16 NEW INDUSTRIAL AUTOMATION LABORATORY & COURSES ECET TECHONOLOGY PROGRAM ADVANCEMENT Gale, Engineering and Technology. A new industrial automation laboratory was recently assembled and seven stations Minnesota state funding, industry contributions, and curriculum planning efforts resulted in a significant

  2. Decision support systems for automated terminal area air traffic control

    E-Print Network [OSTI]

    Pararas, John Demetrios

    1982-01-01

    This work studies the automation of the terminal area Air Traffic Management and Control (ATM/C) system. The ATM/C decision-making process is analyzed and broken down into a number of "automation functions". Each of these ...

  3. Automation of Nested Matrix and Derivative Operations Robert Kalaba

    E-Print Network [OSTI]

    Tesfatsion, Leigh

    Automation of Nested Matrix and Derivative Operations Robert Kalaba Departments of Electrical of special functions a=x, b=y, c = ab, (4) a=log(c), z=a+d. #12;Automation of Matrix Derivative Operations

  4. U.S. Customs and Border Protection (CBP) Announces Automation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Customs and Border Protection (CBP) Announces Automation of Form I-94 ArrivalDeparture Record U.S. Customs and Border Protection (CBP) will begin automation of the I-94 records on...

  5. Automated Demand Response Strategies and Commissioning Commercial Building Controls

    E-Print Network [OSTI]

    Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila; Linkugel, Eric

    2006-01-01

    4 9 . Piette et at Automated Demand Response Strategies andDynamic Controls for Demand Response in New and ExistingFully Automated Demand Response Tests in Large Facilities"

  6. Automated Synthesis of Mechanical Vibration Absorbers Using Genetic Programming

    E-Print Network [OSTI]

    Hu, Jianjun

    Automated Synthesis of Mechanical Vibration Absorbers Using Genetic Programming Jianjun Hu Program an automated methodology for open-ended synthesis of mechanical vibration absorbers based on genetic, 48824 Ronald Rosenberg Department of Mechanical Engineering, Michigan State University, East Lansing, MI

  7. Analysis of Open Automated Demand Response Deployments in California

    E-Print Network [OSTI]

    LBNL-6560E Analysis of Open Automated Demand Response Deployments in California and Guidelines The work described in this report was coordinated by the Demand Response Research. #12; #12;Abstract This report reviews the Open Automated Demand Response

  8. Automated Sorting of Transuranic Waste

    SciTech Connect (OSTI)

    Shurtliff, Rodney Marvin

    2001-03-01

    The HANDSS-55 Transuranic Waste Sorting Module is designed to sort out items found in 55-gallon drums of waste as determined by an operator. Innovative imaging techniques coupled with fast linear motor-based motion systems and a flexible end-effector system allow the operator to remove items from the waste stream by a touch of the finger. When all desired items are removed from the waste stream, the remaining objects are automatically moved to a repackaging port for removal from the glovebox/cell. The Transuranic Waste Sorting Module consists of 1) a high accuracy XYZ Stereo Measurement and Imaging system, 2) a vibrating/tilting sorting table, 3) an XY Deployment System, 4) a ZR Deployment System, 5) several user-selectable end-effectors, 6) a waste bag opening system, 7) control and instrumentation, 8) a noncompliant waste load-out area, and 9) a Human/Machine Interface (HMI). The system is modular in design to accommodate database management tools, additional load-out ports, and other enhancements. Manually sorting the contents of a 55-gallon drum takes about one day per drum. The HANDSS-55 Waste Sorting Module is designed to significantly increase the throughput of this sorting process by automating those functions that are strenuous and tiresome for an operator to perform. The Waste Sorting Module uses the inherent ability of an operator to identify the items that need to be segregated from the waste stream and then, under computer control, picks that item out of the waste and deposits it in the appropriate location. The operator identifies the object by locating the visual image on a large color display and touches the image on the display with his finger. The computer then determines the location of the object, and performing a highspeed image analysis determines its size and orientation, so that a robotic gripper can be deployed to pick it up. Following operator verification by voice or function key, the object is deposited into a specified location.

  9. ISA Approves Standard for Wireless Automation in Process Control...

    Broader source: Energy.gov (indexed) [DOE]

    for Wireless Automation in Process Control Applications More Documents & Publications Wireless System Considerations When Implementing NERC Critical Infrastructure Protection...

  10. Northwest Open Automated Demand Response Technology Demonstration Project

    E-Print Network [OSTI]

    Kiliccote, Sila

    2010-01-01

    Report 2009. Open Automated Demand Response Communicationsand Techniques for Demand Response. California Energyand S. Kiliccote. Estimating Demand Response Load Impacts:

  11. Automation-considered Logic of Authentication and Key Distribution

    E-Print Network [OSTI]

    Kwon, Taekyoung

    methods are focused on the automation-based model checking that relies on building a finite modelAutomation-considered Logic of Authentication and Key Distribution Taekyoung Kwon1 and Seongan Lim2 Abstract. This paper presents an automation-considered logic of au- thentication for reasoning about

  12. Designing and Building a Negotiating Automated Sarit Kraus \\Lambda

    E-Print Network [OSTI]

    Kraus, Sarit

    Designing and Building a Negotiating Automated Agent Sarit Kraus \\Lambda Department of Mathematics developed a general structure for a Negotiating Automated Agent that consists of five modules: a Prime than human players. Key Words: Automated Negotiations, Multi­Agent Environment, Game Playing, Local

  13. Formal Theory Building Using Automated Reasoning Tools Applied Logic Laboratory

    E-Print Network [OSTI]

    Kamps, Jaap

    Formal Theory Building Using Automated Reasoning Tools Jaap Kamps Applied Logic Laboratory-order logic and existing automated rea- soning tools for formal theory building, and illustrates, automated reasoning provides some valuable tools for this endeavor. This paper discusses the use of first

  14. AUTOMATED REGRESSION TESTING AND VERIFICATION OF COMPLEX CODE

    E-Print Network [OSTI]

    Roychoudhury, Abhik

    AUTOMATED REGRESSION TESTING AND VERIFICATION OF COMPLEX CODE CHANGES DOCTORAL THESIS MARCEL B¨OHME NATIONAL UNIVERSITY OF SINGAPORE 2014 #12;AUTOMATED REGRESSION TESTING AND VERIFICATION OF COMPLEX CODE : Automated Regression Testing and Verification of Complex Code Changes Abstract How can we check software

  15. TOWARD AUTOMATED DESIGN OF INDUSTRIAL-STRENGTH ANALOG CIRCUITS

    E-Print Network [OSTI]

    Fernandez, Thomas

    Chapter 8 TOWARD AUTOMATED DESIGN OF INDUSTRIAL-STRENGTH ANALOG CIRCUITS BY MEANS OF GENETIC be extended to deliver industrial-strength automated design of analog circuits, but two countervailing factors been previously established that genetic programming can be used as an automated invention machine

  16. Trust Model for Security Automation Data 1.0 (TMSAD)

    E-Print Network [OSTI]

    Trust Model for Security Automation Data 1.0 (TMSAD) HaroldBooth AdamHalbardier NIST Interagency Report 7802 #12;NIST Interagency Report 7802 Trust Model for Security Automation Data 1.0 (TMSAD) Harold FOR SECURITY AUTOMATION DATA 1.0 (TMSAD) iii Reports on Computer Systems Technology The Information Technology

  17. Evaluation Criteria for Human-Automation Performance Birsen Donmez

    E-Print Network [OSTI]

    Cummings, Mary "Missy"

    Evaluation Criteria for Human-Automation Performance Metrics Birsen Donmez MIT Dept. of Aero(617)252-1512 missyc@mit.edu ABSTRACT Previous research has identified broad metric classes for human- automation. INTRODUCTION Human-automation teams are common in many domains, such as military operations, process control

  18. The Automation of Sound Reasoning and Successful Proof Finding

    E-Print Network [OSTI]

    Fitelson, Branden

    709 44 The Automation of Sound Reasoning and Successful Proof Finding LARRY WOS AND BRANDEN scientist naturally envisioned the automation of sound rea- soning ­ reasoning in which conclusions, and find proofs. But can such logical reasoning be fully automated? Can a single computer program

  19. ITL BULLETIN FOR JANUARY 2012 ADVANCING SECURITY AUTOMATION AND STANDARDIZATION

    E-Print Network [OSTI]

    ITL BULLETIN FOR JANUARY 2012 ADVANCING SECURITY AUTOMATION AND STANDARDIZATION: REVISED TECHNICAL SPECIFICATIONS ISSUED FOR THE SECURITY CONTENT AUTOMATION PROTOCOL (SCAP) Shirley Radack, Editor Computer.S. Department of Commerce The Security Content Automation Protocol (SCAP) is a suite of specifications

  20. Improving Home Automation by Discovering Regularly Occurring Device Usage Patterns

    E-Print Network [OSTI]

    Holder, Lawrence B.

    Improving Home Automation by Discovering Regularly Occurring Device Usage Patterns Edwin O in an environment can be mined to discover significant patterns, which an intelligent agent could use to automate of two prediction algorithms, thus demonstrating multiple uses for a home automation system. Finally, we

  1. INTRODUCTION Recent research on human-automation inter-

    E-Print Network [OSTI]

    Kaber, David B.

    INTRODUCTION Recent research on human-automation inter- action theory (Endsley & Kaber, 1999 decisions about what complex system functions to automate, and to what extent, in advance of implementation and as part of the systems de- sign process. This work has relevance to adap- tive automation. Adaptive

  2. Designing Automation to Reduce Operator Errors Nancy G. Leveson

    E-Print Network [OSTI]

    Leveson, Nancy

    Designing Automation to Reduce Operator Errors Nancy G. Leveson Computer Science and Engineering University of Washington Everett Palmer NASA Ames Research Center Introduction Advanced automation has been of mode­related problems [SW95]. After studying accidents and incidents in the new, highly automated

  3. Remote-Controlled Home Automation Systems with Different Network Technologies

    E-Print Network [OSTI]

    Davies, John N.

    Remote-Controlled Home Automation Systems with Different Network Technologies Armando Roy Delgado into the potential for remote controlled operation of home automation systems. It considers problems, 2002) which certainly requires a careful study before developing any suitable Home Automation System

  4. Automated FMEA based diagnostic symptom generation. Neal Snooke1,

    E-Print Network [OSTI]

    Snooke, Neal

    Automated FMEA based diagnostic symptom generation. Neal Snooke1, , Chris Price Department the model based simulation used to produce an automated Failure Modes and Effect Analysis (FMEA to automate the production of a FMEA report, and the paper also considers the relationship between FMEA

  5. Liquidity-Sensitive Automated Market Makers via Homogeneous Risk Measures

    E-Print Network [OSTI]

    stream of research in au- tomated market making is the design of liquidity-sensitive automated marketLiquidity-Sensitive Automated Market Makers via Homogeneous Risk Measures Abraham Othman and Tuomas. Automated market makers are algorithmic agents that pro- vide liquidity in electronic markets. A recent

  6. EMBEDDED SW DESIGN SPACE EXPLORATION AND AUTOMATION USING

    E-Print Network [OSTI]

    Wagner, Flávio Rech

    EMBEDDED SW DESIGN SPACE EXPLORATION AND AUTOMATION USING UML-BASED TOOLS FLÁVIO R. WAGNER, carro}@inf.ufrgs.br Abstract: This tutorial discusses design space exploration and software automation and allow design space exploration together with software automation. Key words: Embedded Software, Design

  7. Field Demonstration of Automated Demand Response for Both Winter and

    E-Print Network [OSTI]

    LBNL-6216E Field Demonstration of Automated Demand Response for Both Winter and Summer Events;1 Field Demonstration of Automated Demand Response for Both Winter and Summer Events in Large Buildings of a series of field test of automated demand response systems in large buildings in the Pacific Northwest

  8. A Survey of Automated Web Service Composition Methods

    E-Print Network [OSTI]

    integration of heterogeneous systems. In particular, such languages as Universal Description, Discovery in an identical means. Therefore, building composite Web services with an automated or semi- automated tool process adaption and cross-enterprise integration provide the means for automated Web services composition

  9. Sandia Energy - (Lighting and) Solid-State Lighting: Science...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Lighting and) Solid-State Lighting: Science, Technology, Economic Perspectives Home Energy Research EFRCs Solid-State Lighting Science EFRC (Lighting and) Solid-State Lighting:...

  10. Sustainable Office Lighting Options

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Sustainable Office Lighting Options Task Lighting: Task lighting is a localized method of lighting a workspace so that additional, unnecessary lighting is eliminated, decreasing energy usage and costs. Illumination levels in the targeted work areas are higher with task lighting than with the ambient levels

  11. Copyright Cem Kaner. Automated Testing Page 1 Improving the Maintainability of Automated Test Suites

    E-Print Network [OSTI]

    are spread by tool vendors, by executives who don't understand testing, and even by testers and test managers paper "Test Automation Snake Oil."3 1 Parts of this paper were published in Kaner, C., "Pitfalls

  12. Assessment of the Potential to Achieve very Low Energy Use in Public Buildings in China with Advanced Window and Shading Systems

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Lee, Eleanor; Pang, Xiufeng; McNeil, Andrew; Hoffmann, Sabine; Thanachareonkit, Anothai; Li, Zhengrong; Ding, Yong

    2015-05-29

    As rapid growth in the construction industry continues to occur in China, the increased demand for a higher standard living is driving significant growth in energy use and demand across the country. Building codes and standards have been implemented to head off this trend, tightening prescriptive requirements for fenestration component measures using methods similar to the U.S. model energy code American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) 90.1. The objective of this study is to (a) provide an overview of applicable code requirements and current efforts within China to enable characterization and comparison of window and shading products,more »and (b) quantify the load reduction and energy savings potential of several key advanced window and shading systems, given the divergent views on how space conditioning requirements will be met in the future. System-level heating and cooling loads and energy use performance were evaluated for a code-compliant large office building using the EnergyPlus building energy simulation program. Commercially-available, highly-insulating, low-emittance windows were found to produce 24%–66% lower perimeter zone HVAC electricity use compared to the mandated energy-efficiency standard in force (GB 50189-2005) in cold climates like Beijing. Low-e windows with operable exterior shading produced up to 30%–80% reductions in perimeter zone HVAC electricity use in Beijing and 18%–38% reductions in Shanghai compared to the standard. The economic context of China is unique since the cost of labor and materials for the building industry is so low. Broad deployment of these commercially available technologies with the proper supporting infrastructure for design, specification, and verification in the field would enable significant reductions in energy use and greenhouse gas emissions in the near term.« less

  13. Layered Argumentation For Fuzzy Automation Controllers

    E-Print Network [OSTI]

    Governatori, Guido

    is known to be linear to the size of the knowledge base. LAS theories can also be mapped into RTL with counters, registers, and timers) can be successfully used to manage modern automation systems. The main are particularly important if we want to control critical systems, such as nuclear power stations, 100 ton

  14. Automated geographic information fusion and ontology alignment

    E-Print Network [OSTI]

    Duckham, Matt

    geographic information fusion system is semantic heterogeneity, where the concepts and categories usedAutomated geographic information fusion and ontology alignment Matt Duckham1 and Mike Worboys2 1@spatial.maine.edu 1 Introduction Geographic information fusion is the process of integrating geographic infor- mation

  15. Organizing Digital Libraries by Automated Text Categorization

    E-Print Network [OSTI]

    Rauber,Andreas

    Classification Scheme. When it was proclaimed that the Library contained all books, the first impression was oneOrganizing Digital Libraries by Automated Text Categorization Henri Avancini1 , Andreas Rauber2, that is of direct concern to organizing digital libraries. We exemplify this class of applications by discussing

  16. FARM of the FUTURE AUTOMATED REFUELING

    E-Print Network [OSTI]

    Nourbakhsh, Illah

    to minimize waste and runoff. Assists in precision pest management Farm robots can be key components manageable. Enables plant-level management Life cycle monitoring also allows farm robots to customize. This maximizes the quality (and selling price) of farm produce. In the fully-automated Farm of the Future

  17. Automated structure solution with the PHENIX suite

    SciTech Connect (OSTI)

    Terwilliger, Thomas C [Los Alamos National Laboratory; Zwart, Peter H [LBNL; Afonine, Pavel V [LBNL; Grosse - Kunstleve, Ralf W [LBNL

    2008-01-01

    Significant time and effort are often required to solve and complete a macromolecular crystal structure. The development of automated computational methods for the analysis, solution, and completion of crystallographic structures has the potential to produce minimally biased models in a short time without the need for manual intervention. The PHENIX software suite is a highly automated system for macromolecular structure determination that can rapidly arrive at an initial partial model of a structure without significant human intervention, given moderate resolution, and good quality data. This achievement has been made possible by the development of new algorithms for structure determination, maximum-likelihood molecular replacement (PHASER), heavy-atom search (HySS), template- and pattern-based automated model-building (RESOLVE, TEXTAL), automated macromolecular refinement (phenix. refine), and iterative model-building, density modification and refinement that can operate at moderate resolution (RESOLVE, AutoBuild). These algorithms are based on a highly integrated and comprehensive set of crystallographic libraries that have been built and made available to the community. The algorithms are tightly linked and made easily accessible to users through the PHENIX Wizards and the PHENIX GUI.

  18. Automated MAD and MIR structure solution

    SciTech Connect (OSTI)

    Terwilliger, Thomas C., E-mail: terwilliger@lanl.gov [Structural Biology Group, Mail Stop M888, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Berendzen, Joel [Biophysics Group, Mail Stop D454, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Structural Biology Group, Mail Stop M888, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    1999-04-01

    A fully automated procedure for solving MIR and MAD structures has been developed using a scoring scheme to convert the structure-solution process into an optimization problem. Obtaining an electron-density map from X-ray diffraction data can be difficult and time-consuming even after the data have been collected, largely because MIR and MAD structure determinations currently require many subjective evaluations of the qualities of trial heavy-atom partial structures before a correct heavy-atom solution is obtained. A set of criteria for evaluating the quality of heavy-atom partial solutions in macromolecular crystallography have been developed. These have allowed the conversion of the crystal structure-solution process into an optimization problem and have allowed its automation. The SOLVE software has been used to solve MAD data sets with as many as 52 selenium sites in the asymmetric unit. The automated structure-solution process developed is a major step towards the fully automated structure-determination, model-building and refinement procedure which is needed for genomic scale structure determinations.

  19. Automated Structure Solution with the PHENIX Suite

    SciTech Connect (OSTI)

    Zwart, Peter H.; Zwart, Peter H.; Afonine, Pavel; Grosse-Kunstleve, Ralf W.; Hung, Li-Wei; Ioerger, Tom R.; McCoy, A.J.; McKee, Eric; Moriarty, Nigel; Read, Randy J.; Sacchettini, James C.; Sauter, Nicholas K.; Storoni, L.C.; Terwilliger, Tomas C.; Adams, Paul D.

    2008-06-09

    Significant time and effort are often required to solve and complete a macromolecular crystal structure. The development of automated computational methods for the analysis, solution and completion of crystallographic structures has the potential to produce minimally biased models in a short time without the need for manual intervention. The PHENIX software suite is a highly automated system for macromolecular structure determination that can rapidly arrive at an initial partial model of a structure without significant human intervention, given moderate resolution and good quality data. This achievement has been made possible by the development of new algorithms for structure determination, maximum-likelihood molecular replacement (PHASER), heavy-atom search (HySS), template and pattern-based automated model-building (RESOLVE, TEXTAL), automated macromolecular refinement (phenix.refine), and iterative model-building, density modification and refinement that can operate at moderate resolution (RESOLVE, AutoBuild). These algorithms are based on a highly integrated and comprehensive set of crystallographic libraries that have been built and made available to the community. The algorithms are tightly linked and made easily accessible to users through the PHENIX Wizards and the PHENIX GUI.

  20. Automated Storage Reclamation Using Temporal Importance Annotations

    E-Print Network [OSTI]

    Gehani, Ashish

    Automated Storage Reclamation Using Temporal Importance Annotations Surendar Chandra, Ashish.edu Abstract This work focuses on scenarios that require the storage of large amounts of data. Such sys- tems require the ability to either continuously increase the storage space or reclaim space by deleting

  1. Automated Testing with Targeted Event Sequence Generation

    E-Print Network [OSTI]

    Møller, Anders

    Engineering]: Testing and Debugging General Terms Languages, Verification Keywords Symbolic execution; test heavy but may have complex user interaction patterns. One popular technique is black-box random testingAutomated Testing with Targeted Event Sequence Generation Casper S. Jensen , Aarhus University

  2. Confluence of Term Rewriting: Theory and Automation

    E-Print Network [OSTI]

    Middeldorp, Aart

    its theory and its automation. Term rewrite systems are a model of computation in which terms of the requirements for the degree of Doctor of Philosophy advisor: Univ.-Prof. Dr. Aart Middeldorp Innsbruck, 3 (1016683) bertram.felgenhauer@uibk.ac.at 3 February 2015 advisor: Univ.-Prof. Dr. Aart Middeldorp #12

  3. Applications of Automated Mechanism Design Vincent Conitzer

    E-Print Network [OSTI]

    Applications of Automated Mechanism Design Vincent Conitzer Computer Science Department Carnegie University Pittsburgh, PA 15213 Abstract Mechanism design is the art of designing the rules of the game so mechanism design (AMD) [5]. In that paper and in other work, we studied its worst-case com- plexity [5, 6, 7

  4. Classified Automated Information System Security Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1994-07-15

    To establish uniform requirements, policies, responsibilities, and procedures for the development and implementation of a Department of Energy (DOE) Classified Computer Security Program to ensure the security of classified information in automated data processing (ADP) systems. Cancels DOE O 5637.1. Canceled by DOE O 471.2.

  5. Software Engineering and Automated Deduction Willem Visser

    E-Print Network [OSTI]

    Borgs, Christian

    consider some of the current and future trends in software engineering and the type of advances it maySoftware Engineering and Automated Deduction Willem Visser Stellenbosch University Stellenbosch a range of engineering challenges. How do we cap- ture the expected behavior of the software? How can we

  6. Medial Techniques for Automating Finite Element Analysis

    E-Print Network [OSTI]

    Whitton, Mary C.

    Medial Techniques for Automating Finite Element Analysis by Jessica Renee Crawford Crouch Analysis. (Under the direction of Stephen M. Pizer.) Finite element analysis provides a principled method the simulation of tissue deformation. The drawback to using finite element analysis for imaging problems

  7. Automating Energy Optimization with Features Norbert Siegmund

    E-Print Network [OSTI]

    Apel, Sven

    Automating Energy Optimization with Features Norbert Siegmund University of Magdeburg Magdeburg, Germany nsiegmun@ovgu.de Marko Rosenmüller University of Magdeburg Magdeburg, Germany rosenmue@ovgu.de Sven Apel University of Passau Passau, Germany apel@uni-passau.de ABSTRACT Mobile devices such as cell

  8. Automated Fuel Dispensing System Form Instructions

    E-Print Network [OSTI]

    Marques, Oge

    Automated Fuel Dispensing System Form Instructions If additional forms are necessary to provide(s) are hired and will be obtaining fuel, an Add Driver Form MUST be submitted for entry into the web database and/or diesel fuel to operate. Note: When a new vehicle, golf cart (gasoline), etc., is placed

  9. Solid State Lighting Program (Falcon)

    SciTech Connect (OSTI)

    Meeks, Steven

    2012-06-30

    Over the past two years, KLA-Tencor and partners successfully developed and deployed software and hardware tools that increase product yield for High Brightness LED (HBLED) manufacturing and reduce product development and factory ramp times. This report summarizes our development effort and details of how the results of the Solid State Light Program (Falcon) have started to help HBLED manufacturers optimize process control by enabling them to flag and correct identified killer defect conditions at any point of origin in the process manufacturing flow. This constitutes a quantum leap in yield management over current practice. Current practice consists of die dispositioning which is just rejection of bad die at end of process based upon probe tests, loosely assisted by optical in-line monitoring for gross process deficiencies. For the first time, and as a result of our Solid State Lighting Program, our LED manufacturing partners have obtained the software and hardware tools that optimize individual process steps to control killer defects at the point in the processes where they originate. Products developed during our two year program enable optimized inspection strategies for many product lines to minimize cost and maximize yield. The Solid State Lighting Program was structured in three phases: i) the development of advanced imaging modes that achieve clear separation between LED defect types, improves signal to noise and scan rates, and minimizes nuisance defects for both front end and back end inspection tools, ii) the creation of defect source analysis (DSA) software that connect the defect maps from back-end and front-end HBLED manufacturing tools to permit the automatic overlay and traceability of defects between tools and process steps, suppress nuisance defects, and identify the origin of killer defects with process step and conditions, and iii) working with partners (Philips Lumileds) on product wafers, obtain a detailed statistical correlation of automated defect and DSA map overlay to failed die identified using end product probe test results. Results from our two year effort have led to “automated end-to-end defect detection” with full defect traceability and the ability to unambiguously correlate device killer defects to optically detected features and their point of origin within the process. Success of the program can be measured by yield improvements at our partner’s facilities and new product orders.

  10. Automation of Capacity Bidding with an Aggregator Using Open Automated Demand Response

    SciTech Connect (OSTI)

    Kiliccote, Sila; Piette, Mary Ann

    2008-10-01

    This report summarizes San Diego Gas& Electric Company?s collaboration with the Demand Response Research Center to develop and test automation capability for the Capacity Bidding Program in 2007. The report describes the Open Automated Demand Response architecture, summarizes the history of technology development and pilot studies. It also outlines the Capacity Bidding Program and technology being used by an aggregator that participated in this demand response program. Due to delays, the program was not fully operational for summer 2007. However, a test event on October 3, 2007, showed that the project successfully achieved the objective to develop and demonstrate how an open, Web?based interoperable automated notification system for capacity bidding can be used by aggregators for demand response. The system was effective in initiating a fully automated demand response shed at the aggregated sites. This project also demonstrated how aggregators can integrate their demand response automation systems with San Diego Gas& Electric Company?s Demand Response Automation Server and capacity bidding program.

  11. I-94 Automation CBP has announced it will begin an automated system for issuance of Form I-94 at SEA and AIR Ports of

    E-Print Network [OSTI]

    I-94 Automation CBP has announced it will begin an automated system for issuance of Form I-94. The implementation of this automated system will take place over four weeks according to the schedule posted

  12. Installation and Commissioning Automated Demand Response Systems

    SciTech Connect (OSTI)

    Global Energy Partners; Pacific Gas and Electric Company; Kiliccote, Sila; Kiliccote, Sila; Piette, Mary Ann; Wikler, Greg; Prijyanonda, Joe; Chiu, Albert

    2008-04-21

    Demand Response (DR) can be defined as actions taken to reduce electric loads when contingencies, such as emergencies and congestion, occur that threaten supply-demand balance, or market conditions raise supply costs. California utilities have offered price and reliability DR based programs to customers to help reduce electric peak demand. The lack of knowledge about the DR programs and how to develop and implement DR control strategies is a barrier to participation in DR programs, as is the lack of automation of DR systems. Most DR activities are manual and require people to first receive notifications, and then act on the information to execute DR strategies. Levels of automation in DR can be defined as follows. Manual Demand Response involves a labor-intensive approach such as manually turning off or changing comfort set points at each equipment switch or controller. Semi-Automated Demand Response involves a pre-programmed demand response strategy initiated by a person via centralized control system. Fully-Automated Demand Response does not involve human intervention, but is initiated at a home, building, or facility through receipt of an external communications signal. The receipt of the external signal initiates pre-programmed demand response strategies. We refer to this as Auto-DR (Piette et. al. 2005). Auto-DR for commercial and industrial facilities can be defined as fully automated DR initiated by a signal from a utility or other appropriate entity and that provides fully-automated connectivity to customer end-use control strategies. One important concept in Auto-DR is that a homeowner or facility manager should be able to 'opt out' or 'override' a DR event if the event comes at time when the reduction in end-use services is not desirable. Therefore, Auto-DR is not handing over total control of the equipment or the facility to the utility but simply allowing the utility to pass on grid related information which then triggers facility defined and programmed strategies if convenient to the facility. From 2003 through 2006 Lawrence Berkeley National Laboratory (LBNL) and the Demand Response Research Center (DRRC) developed and tested a series of demand response automation communications technologies known as Automated Demand Response (Auto-DR). In 2007, LBNL worked with three investor-owned utilities to commercialize and implement Auto-DR programs in their territories. This paper summarizes the history of technology development for Auto-DR, and describes the DR technologies and control strategies utilized at many of the facilities. It outlines early experience in commercializing Auto-DR systems within PG&E DR programs, including the steps to configure the automation technology. The paper also describes the DR sheds derived using three different baseline methodologies. Emphasis is given to the lessons learned from installation and commissioning of Auto-DR systems, with a detailed description of the technical coordination roles and responsibilities, and costs.

  13. Lighting Options for Homes.

    SciTech Connect (OSTI)

    Baker, W.S.

    1991-04-01

    This report covers many aspects of various lighting options for homes. Types of light sources described include natural light, artificial light, incandescent lamps, fluorescent lamps, and high intensity discharge lamps. A light source selection guide gives the physical characteristics of these, design considerations, and common applications. Color, strategies for efficient lighting, and types of lighting are discussed. There is one section giving tips for various situations in specific rooms. Rooms and types of fixtures are shown on a matrix with watts saved by using the recommended type lighting for that room and room location. A major emphasis of this report is saving energy by utilizing the most suitable, recommended lighting option. (BN)

  14. Mobile lighting apparatus

    DOE Patents [OSTI]

    Roe, George Michael; Klebanoff, Leonard Elliott; Rea, Gerald W; Drake, Robert A; Johnson, Terry A; Wingert, Steven John; Damberger, Thomas A; Skradski, Thomas J; Radley, Christopher James; Oros, James M; Schuttinger, Paul G; Grupp, David J; Prey, Stephen Carl

    2013-05-14

    A mobile lighting apparatus includes a portable frame such as a moveable trailer or skid having a light tower thereon. The light tower is moveable from a stowed position to a deployed position. A hydrogen-powered fuel cell is located on the portable frame to provide electrical power to an array of the energy efficient lights located on the light tower.

  15. Saturn facility oil transfer automation system

    SciTech Connect (OSTI)

    Joseph, Nathan R.; Thomas, Rayburn Dean; Lewis, Barbara Ann; Malagon, Hector M.

    2014-02-01

    The Saturn accelerator, owned by Sandia National Laboratories, has been in operation since the early 1980s and still has many of the original systems. A critical legacy system is the oil transfer system which transfers 250,000 gallons of transformer oil from outside storage tanks to the Saturn facility. The oil transfer system was iden- ti ed for upgrade to current technology standards. Using the existing valves, pumps, and relay controls, the system was automated using the National Instruments cRIO FGPA platform. Engineered safety practices, including a failure mode e ects analysis, were used to develop error handling requirements. The uniqueness of the Saturn Oil Automated Transfer System (SOATS) is in the graphical user interface. The SOATS uses an HTML interface to communicate to the cRIO, creating a platform independent control system. The SOATS was commissioned in April 2013.

  16. The Automated Palomar 60-Inch Telescope

    E-Print Network [OSTI]

    S. Bradley Cenko; Derek B. Fox; Dae-Sik Moon; Fiona A. Harrison; S. R. Kulkarni; John R. Henning; C. Dani Guzman; Marco Bonati; Roger M. Smith; Robert P. Thicksten; Michael W. Doyle; Hal L. Petrie; Avishay Gal-Yam; Alicia M. Soderberg; Nathaniel L. Anagnostou; Anastasia C. Laity

    2006-08-15

    We have converted the Palomar 60-inch telescope (P60) from a classical night assistant-operated telescope to a fully robotic facility. The automated system, which has been operational since September 2004, is designed for moderately fast (t <~ 3 minutes) and sustained (R <~ 23 mag) observations of gamma-ray burst afterglows and other transient events. Routine queue-scheduled observations can be interrupted in response to electronic notification of transient events. An automated pipeline reduces data in real-time, which is then stored on a searchable web-based archive for ease of distribution. We describe here the design requirements, hardware and software upgrades, and lessons learned from roboticization. We present an overview of the current system performance as well as plans for future upgrades.

  17. Automated diagnostic kiosk for diagnosing diseases

    DOE Patents [OSTI]

    Regan, John Frederick; Birch, James Michael

    2014-02-11

    An automated and autonomous diagnostic apparatus that is capable of dispensing collection vials and collections kits to users interesting in collecting a biological sample and submitting their collected sample contained within a collection vial into the apparatus for automated diagnostic services. The user communicates with the apparatus through a touch-screen monitor. A user is able to enter personnel information into the apparatus including medical history, insurance information, co-payment, and answer a series of questions regarding their illness, which is used to determine the assay most likely to yield a positive result. Remotely-located physicians can communicate with users of the apparatus using video tele-medicine and request specific assays to be performed. The apparatus archives submitted samples for additional testing. Users may receive their assay results electronically. Users may allow the uploading of their diagnoses into a central databank for disease surveillance purposes.

  18. Northwest Open Automated Demand Response Technology Demonstration Project

    SciTech Connect (OSTI)

    Kiliccote, Sila; Dudley, Junqiao Han; Piette, Mary Ann

    2009-08-01

    Lawrence Berkeley National Laboratory (LBNL) and the Demand Response Research Center (DRRC) performed a technology demonstration and evaluation for Bonneville Power Administration (BPA) in Seattle City Light's (SCL) service territory. This report summarizes the process and results of deploying open automated demand response (OpenADR) in Seattle area with winter morning peaking commercial buildings. The field tests were designed to evaluate the feasibility of deploying fully automated demand response (DR) in four to six sites in the winter and the savings from various building systems. The project started in November of 2008 and lasted 6 months. The methodology for the study included site recruitment, control strategy development, automation system deployment and enhancements, and evaluation of sites participation in DR test events. LBNL subcontracted McKinstry and Akuacom for this project. McKinstry assisted with recruitment, site survey collection, strategy development and overall participant and control vendor management. Akuacom established a new server and enhanced its operations to allow for scheduling winter morning day-of and day-ahead events. Each site signed a Memorandum of Agreement with SCL. SCL offered each site $3,000 for agreeing to participate in the study and an additional $1,000 for each event they participated. Each facility and their control vendor worked with LBNL and McKinstry to select and implement control strategies for DR and developed their automation based on the existing Internet connectivity and building control system. Once the DR strategies were programmed, McKinstry commissioned them before actual test events. McKinstry worked with LBNL to identify control points that can be archived at each facility. For each site LBNL collected meter data and trend logs from the energy management and control system. The communication system allowed the sites to receive day-ahead as well as day-of DR test event signals. Measurement of DR was conducted using three different baseline models for estimation peak load reductions. One was three-in-ten baseline, which is based on the site electricity consumption from 7 am to 10 am for the three days with the highest consumption of the previous ten business days. The second model, the LBNL outside air temperature (OAT) regression baseline model, is based on OAT data and site electricity consumption from the previous ten days, adjusted using weather regressions from the fifteen-minute electric load data during each DR test event for each site. A third baseline that simply averages the available load data was used for sites less with less than 10 days of historical meter data. The evaluation also included surveying sites regarding any problems or issues that arose during the DR test events. Question covered occupant comfort, control issues and other potential problems.

  19. Automated assistance for detecting malicious code

    SciTech Connect (OSTI)

    Crawford, R.; Kerchen, P.; Levitt, K.; Olsson, R.; Archer, M.; Casillas, M. [Univ. of California, Davis, CA (US). Dept. of Computer Science

    1993-06-18

    This paper gives an update on the continuing work on the Malicious Code Testbed (MCT). The MCT is a semi-automated tool, operating in a simulated, cleanroom environment, that is capable of detecting many types of malicious code, such as viruses, Trojan horses, and time/logic bombs. The MCT allows security analysts to check a program before installation, thereby avoiding any damage a malicious program might inflict.

  20. An advanced power distribution automation model system

    SciTech Connect (OSTI)

    Niwa, Shigeharu; Kanoi, Minoru; Nishijima, Kazuo; Hayami, Mitsuo

    1995-12-31

    An advanced power distribution automation (APDA) model system has been developed on the present basis of the automated distribution systems in Japan, which have been used for remote switching operations and for urgent supply restorations during faults. The increased use of electronic apparatuses sensitive to supply interruption requires very high supply reliability, and the final developed system is expected to be useful for this purpose. The developed model system adopts pole circuit breakers and remote termination units connected through 64kbps optical fibers to the computer of the automated system in the control center. Immediate switching operations for supply restorations during faults are possible through the restoration procedures, prepared beforehand, by the computer and by fast telecommunications using optical fibers. So, protection by the feeder circuit breaker in the substation can be avoided, which would otherwise cause the blackout of the whole distribution line. The test results show the effectiveness of model the system: successful fault locations and reconfiguration for supply restoration including separation of the fault sections (without blackout for the ground faults and with a short period (within 1 s) of blackout for the short-circuit faults).

  1. Practical image based lighting 

    E-Print Network [OSTI]

    Lee, Jaemin

    2003-01-01

    information is lighting. Image based lighting that is developed to recover illumination information of the real world from photographs has recently been popular in computer graphics. In this thesis we present a practical image based lighting method. Our...

  2. Light in the city

    E-Print Network [OSTI]

    Srinivasan, Kavita, 1976-

    2002-01-01

    This thesis focuses on enhancing the awareness of light for the pedestrian,and using light as a way of revealing the structure of the city and its relation to the cosmos. It proposes that aesthetic qualities of light inform ...

  3. Advances in Lighting 

    E-Print Network [OSTI]

    Tumber, A. J.

    1981-01-01

    Increasing electricity costs have made a significant impact on lighting. The Illuminating Engineering society (I.E.S.) and the lighting industry are producing new standards, procedures and products to make lighting more appropriate and energy...

  4. Natural lighting and skylights 

    E-Print Network [OSTI]

    Evans, Benjamin Hampton

    1961-01-01

    There are many physiological and psychological factors which enter into the proper design of space for human occupancy. One of these elements is light. Both natural light and manufactured light are basic tools with which any designer must work...

  5. Specific light in sculpture

    E-Print Network [OSTI]

    Powell, John William

    1989-01-01

    Specific light is defined as light from artificial or altered natural sources. The use and manipulation of light in three dimensional sculptural work is discussed in an historic and contemporary context. The author's work ...

  6. Advanced Demand Responsive Lighting

    E-Print Network [OSTI]

    Advanced Demand Responsive Lighting Host: Francis Rubinstein Demand Response Research Center demand responsive lighting systems ­ Importance of dimming ­ New wireless controls technologies · Advanced Demand Responsive Lighting (commenced March 2007) #12;Objectives · Provide up-to-date information

  7. Field Demonstration of Automated Demand Response for Both Winter and Summer Events in Large Buildings in the Pacific Northwest

    E-Print Network [OSTI]

    Piette, Mary Ann

    2014-01-01

    of fully automated demand response in large facilities,2009). Open Automated Demand Response CommunicationsOpen Automated Demand Response Technology Demonstration

  8. A DISTRIBUTED INTELLIGENT AUTOMATED DEMAND RESPONSE BUILDING MANAGEMENT SYSTEM

    SciTech Connect (OSTI)

    Auslander, David; Culler, David; Wright, Paul; Lu, Yan; Piette, Mary

    2013-12-30

    The goal of the 2.5 year Distributed Intelligent Automated Demand Response (DIADR) project was to reduce peak electricity load of Sutardja Dai Hall at UC Berkeley by 30% while maintaining a healthy, comfortable, and productive environment for the occupants. We sought to bring together both central and distributed control to provide “deep” demand response1 at the appliance level of the building as well as typical lighting and HVAC applications. This project brought together Siemens Corporate Research and Siemens Building Technology (the building has a Siemens Apogee Building Automation System (BAS)), Lawrence Berkeley National Laboratory (leveraging their Open Automated Demand Response (openADR), Auto-­Demand Response, and building modeling expertise), and UC Berkeley (related demand response research including distributed wireless control, and grid-­to-­building gateway development). Sutardja Dai Hall houses the Center for Information Technology Research in the Interest of Society (CITRIS), which fosters collaboration among industry and faculty and students of four UC campuses (Berkeley, Davis, Merced, and Santa Cruz). The 141,000 square foot building, occupied in 2009, includes typical office spaces and a nanofabrication laboratory. Heating is provided by a district heating system (steam from campus as a byproduct of the campus cogeneration plant); cooling is provided by one of two chillers: a more typical electric centrifugal compressor chiller designed for the cool months (Nov-­ March) and a steam absorption chiller for use in the warm months (April-­October). Lighting in the open office areas is provided by direct-­indirect luminaries with Building Management System-­based scheduling for open areas, and occupancy sensors for private office areas. For the purposes of this project, we focused on the office portion of the building. Annual energy consumption is approximately 8053 MWh; the office portion is estimated as 1924 MWh. The maximum peak load during the study period was 1175 kW. Several new tools facilitated this work, such as the Smart Energy Box, the distributed load controller or Energy Information Gateway, the web-­based DR controller (dubbed the Central Load-­Shed Coordinator or CLSC), and the Demand Response Capacity Assessment & Operation Assistance Tool (DRCAOT). In addition, an innovative data aggregator called sMAP (simple Measurement and Actuation Profile) allowed data from different sources collected in a compact form and facilitated detailed analysis of the building systems operation. A smart phone application (RAP or Rapid Audit Protocol) facilitated an inventory of the building’s plug loads. Carbon dioxide sensors located in conference rooms and classrooms allowed demand controlled ventilation. The extensive submetering and nimble access to this data provided great insight into the details of the building operation as well as quick diagnostics and analyses of tests. For example, students discovered a short-­cycling chiller, a stuck damper, and a leaking cooling coil in the first field tests. For our final field tests, we were able to see how each zone was affected by the DR strategies (e.g., the offices on the 7th floor grew very warm quickly) and fine-­tune the strategies accordingly.

  9. Light Duty Combustion Research: Advanced Light-Duty Combustion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Light Duty Combustion Research: Advanced Light-Duty Combustion Experiments Light Duty Combustion Research: Advanced Light-Duty Combustion Experiments 2009 DOE Hydrogen Program and...

  10. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    are also under consideration. Outside the DOE, the Environmental Protection Agency's Green Lights program promotes energy-efficient lighting as a means to reducing...

  11. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Motivation and Computation of Lighting Measures Floorspace by Lighting Equipment Configuration As described in Appendix A, for each building b, the CBECS data set has the total...

  12. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    more comprehensive understanding of commercial lighting and the potential for lighting energy savings. Steps to build on this analysis can be taken in many directions. One...

  13. Leavenworth Tree Lighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Join HERO for our annual Leavenworth Tree Lighting Ceremony & Shopping SATURDAY DECEMBER 12, 2015 Leavenworth Christmas Lighting Festival Visitors return year after year for some...

  14. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    light by passing electricity through mercury vapor, which causes the fluorescent coating to glow or fluoresce. High-Efficiency Ballast (HEB): A lighting conservation feature...

  15. Exciting White Lighting

    Broader source: Energy.gov [DOE]

    Windows that emit light and are more energy efficient? Universal Display’s PHOLED technology enables windows that have transparent light-emitting diodes in them.

  16. Automated genome mining of ribosomal peptide natural products

    SciTech Connect (OSTI)

    Mohimani, Hosein; Kersten, Roland; Liu, Wei; Wang, Mingxun; Purvine, Samuel O.; Wu, Si; Brewer, Heather M.; Pasa-Tolic, Ljiljana; Bandeira, Nuno; Moore, Bradley S.; Pevzner, Pavel A.; Dorrestein, Pieter C.

    2014-07-31

    Ribosomally synthesized and posttranslationally modified peptides (RiPPs), especially from microbial sources, are a large group of bioactive natural products that are a promising source of new (bio)chemistry and bioactivity (1). In light of exponentially increasing microbial genome databases and improved mass spectrometry (MS)-based metabolomic platforms, there is a need for computational tools that connect natural product genotypes predicted from microbial genome sequences with their corresponding chemotypes from metabolomic datasets. Here, we introduce RiPPquest, a tandem mass spectrometry database search tool for identification of microbial RiPPs and apply it for lanthipeptide discovery. RiPPquest uses genomics to limit search space to the vicinity of RiPP biosynthetic genes and proteomics to analyze extensive peptide modifications and compute p-values of peptide-spectrum matches (PSMs). We highlight RiPPquest by connection of multiple RiPPs from extracts of Streptomyces to their gene clusters and by the discovery of a new class III lanthipeptide, informatipeptin, from Streptomyces viridochromogenes DSM 40736 as the first natural product to be identified in an automated fashion by genome mining. The presented tool is available at cy-clo.ucsd.edu.

  17. A Distributed Facilities Automation System For IBM Buildings 

    E-Print Network [OSTI]

    Houle, W. D. Sr.

    1985-01-01

    and to provide the plant oper ator with data to allow more effi cient operations. The most widely used program, General Purpose Automation Executive (GPAX), uses the IBM Series/1 to provide moni toring, optimization, and control for facilities automation... FACILITIES AUTOMATION SYSTEM FOR IBM BUILDINGS Walter D. Houle, Sr. IBM Corporation Atlanta, Georgia INTRODUCTION Automatic building control systems have rapidly evolved from time-based on-off energy management controllers to distributed...

  18. A procedural language for automated analog circuit design 

    E-Print Network [OSTI]

    Macaluso, Edmond Roy

    1984-01-01

    new design system for the automated design of analog integrated circuits is presented. This system provides completely automated layout from a multilevel circuit description. The circuit description may include instances of fixed geomet- ric... Hierarchical Layout Description Languages for IC Design Summary Scope of Thesis Overview of Remainder of Thesis 1 2 4 5 6 g 11 14 15 16 II AUTOMATED ANALOG CIRCUIT DESIGN 18 2. 1 2. 2 2. 3 2. 4 Analog Design Requirements A Prototype System...

  19. Lighting Controls | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Controls Lighting Controls Use lighting controls to automatically turn lights on and off as needed, and save energy. | Photo courtesy of iStockphoto.comMaliketh. Use lighting...

  20. Automated Home Energy Management (AHEM) Standing Technical Committee...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Home Energy Management (AHEM) Standing Technical Committee Strategic Plan - February 2012 Automated Home Energy Management (AHEM) Standing Technical Committee Strategic Plan -...

  1. The present invention relates to automated methods of introducing...

    Office of Scientific and Technical Information (OSTI)

    The present invention relates to automated methods of introducing multiple nucleic acid sequences into one or more target cells. Citation Details In-Document Search Title: The...

  2. Direct versus Facility Centric Load Control for Automated Demand Response

    E-Print Network [OSTI]

    Piette, Mary Ann

    2010-01-01

    Interoperable Automated Demand Response Infrastructure.and Techniques for Demand Response. LBNL Report 59975. Mayand Communications for Demand Response and Energy Efficiency

  3. Proceedings of the IEEE International Conference on Mechatronics & Automation

    E-Print Network [OSTI]

    Cavusoglu, Cenk

    Proceedings of the IEEE International Conference on Mechatronics & Automation Niagara Falls, Canada - Recent developments in the field of robotics, smart materials, micro actuators and mechatronics have

  4. Reference Model for Control and Automation Systems in Electrical...

    Office of Environmental Management (EM)

    Reference Model for Control and Automation Systems in Electrical Power Version 1.2 October 12, 2005 Prepared by: Sandia National Laboratories' Center for SCADA Security Jason...

  5. Automating the CAD/CAE Dimensional Reduction Process

    E-Print Network [OSTI]

    Suresh, Krishnan

    Automating the CAD/CAE Dimensional Reduction Process Dr. Krishnan Suresh Department of Mechanical - CAD General Terms Algorithms, Design, Theory. Keywords CAD, CAE, medial axis transforms, dimensional

  6. Linking Continuous Energy Management and Open Automated Demand Response

    E-Print Network [OSTI]

    Piette, Mary Ann

    2009-01-01

    A. Barat, D. Watson. Demand Response Spinning ReserveOpen Automated Demand Response Communication Standards:Dynamic Controls for Demand Response in a New Commercial

  7. V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple...

    Broader source: Energy.gov (indexed) [DOE]

    IBM has acknowledged a weakness and multiple vulnerabilities in IBM Tivoli System Automation for Multiplatforms, which can be exploited by malicious, local users to disclose...

  8. AFID: an automated approach to collecting software faults

    E-Print Network [OSTI]

    Edwards, Alex; Tucker, Sean; Demsky, Brian

    2010-01-01

    of the 7th European Software Engineering Conference/7th ACMSymposium on Foundations of Software Engineering, pp. 253–Conference on Automated Software Engineering, pp. 433–436 (

  9. From Validation to Automated Repair & Beyond with Constraint Solving

    E-Print Network [OSTI]

    Samimi, Hesam

    2013-01-01

    HTML GenerationRepair: Automated Repair of HTML Generation Errors in PHPrenderings of our invalid HTML page in Google Chrome 13.0 (

  10. Pedestrian Friendly Outdoor Lighting

    SciTech Connect (OSTI)

    Miller, N. J.; Koltai, R. N.; McGowan, T. K.

    2013-12-01

    The GATEWAY program followed two pedestrian-scale lighting projects that required multiple mockups – one at Stanford University in California and the other at Chautauqua Institution in upstate New York. The report provides insight into pedestrian lighting criteria, how they differ from street and area lighting criteria, and how solid-state lighting can be better applied in pedestrian applications.

  11. Automated Critical Peak Pricing Field Tests: 2006 Pilot Program Description and Results

    E-Print Network [OSTI]

    Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila

    2007-01-01

    and Mark Lott  C&C Building Automation:   Mark Johnson and Commission meetings  Building Automation 2006 Conference (see Appendix  A).  C&C Building Automation 9  was the firm 

  12. Robotics and Manufacturing Automation Laboratory of the MMRI http://robotics.mcmaster.ca

    E-Print Network [OSTI]

    Bone, Gary

    Robotics and Manufacturing Automation Laboratory of the MMRI http://robotics.mcmaster.ca Powered Chan and Matthew Lahey Robotics and Manufacturing Automation Laboratory, McMaster Manufacturing Research Institute (MMRI). The 14th International Conference on Flexible Automation and Intelligent

  13. MODELING REAL-TIME HUMAN-AUTOMATION COLLABORATIVE SCHEDULING OF UNMANNED VEHICLES

    E-Print Network [OSTI]

    Cummings, Mary "Missy"

    MODELING REAL-TIME HUMAN-AUTOMATION COLLABORATIVE SCHEDULING OF UNMANNED VEHICLES by ANDREW S, Humans and Automation Laboratory Certified by;3 MODELING REAL-TIME HUMAN-AUTOMATION COLLABORATIVE SCHEDULING OF UNMANNED VEHICLES by Andrew S. Clare

  14. Methodology for prototyping increased levels of automation for spacecraft rendezvous functions 

    E-Print Network [OSTI]

    Hart, Jeremy Jay

    2009-05-15

    The Crew Exploration Vehicle (CEV) necessitates higher levels of automation than previous NASA vehicles due to program requirements for automation, including Automated Rendezvous and Docking (AR&D). Studies of spacecraft development often point...

  15. Effects of an Advanced Reactor’s Design, Use of Automation, and Mission on Human Operators

    SciTech Connect (OSTI)

    Jeffrey C. Joe; Johanna H. Oxstrand

    2014-06-01

    The roles, functions, and tasks of the human operator in existing light water nuclear power plants (NPPs) are based on sound nuclear and human factors engineering (HFE) principles, are well defined by the plant’s conduct of operations, and have been validated by years of operating experience. However, advanced NPPs whose engineering designs differ from existing light-water reactors (LWRs) will impose changes on the roles, functions, and tasks of the human operators. The plans to increase the use of automation, reduce staffing levels, and add to the mission of these advanced NPPs will also affect the operator’s roles, functions, and tasks. We assert that these factors, which do not appear to have received a lot of attention by the design engineers of advanced NPPs relative to the attention given to conceptual design of these reactors, can have significant risk implications for the operators and overall plant safety if not mitigated appropriately. This paper presents a high-level analysis of a specific advanced NPP and how its engineered design, its plan to use greater levels of automation, and its expanded mission have risk significant implications on operator performance and overall plant safety.

  16. Monitoring peak power and cooling energy savings of shade trees and white surfaces in the Sacramento Municipal Utility District (SMUD) service area: Project design and preliminary results

    SciTech Connect (OSTI)

    Akbari, H.; Bretz, S.; Hanford, J.; Rosenfeld, A.; Sailor, D.; Taha, H. [Lawrence Berkeley Lab., CA (United States); Bos, W. [Sacramento Municipal Utility District, CA (United States)

    1992-12-01

    Urban areas in warm climates create summer heat islands of daily average intensity of 3--5{degrees}C, adding to discomfort and increasing air-conditioning loads. Two important factors contributing to urban heat islands are reductions in albedo (lower overall city reflectance) and loss of vegetation (less evapotranspiration). Reducing summer heat islands by planting vegetation (shade trees) and increasing surface albedos, saves cooling energy, allows down-sizing of air conditioners, lowers air-conditioning peak demand, and reduces the emission of CO{sub 2} and other pollutants from electric power plants. The focus of this multi-year project, jointly sponsored by SMUD and the California Institute for Energy Efficiency (CIEE), was to measure the direct cooling effects of trees and white surfaces (mainly roofs) in a few buildings in Sacramento. The first-year project was to design the experiment and obtain base case data. We also obtained limited post retrofit data for some sites. This report provides an overview of the project activities during the first year at six sites. The measurement period for some of the sites was limited to September and October, which are transitional cooling months in Sacramento and hence the interpretation of results only apply to this period. In one house, recoating the dark roof with a high-albedo coating rendered air conditioning unnecessary for the month of September (possible savings of up to 10 kWh per day and 2 kW of non-coincidental peak power). Savings of 50% relative to an identical base case bungalow were achieved when a school bungalow`s roof and southeast wall were coated with a high-albedo coating during the same period. Our measured data for the vegetation sites do not indicate conclusive results because shade trees were small and the cooling period was almost over. We need to collect more data over a longer cooling season in order to demonstrate savings conclusively.

  17. Automated fluid analysis apparatus and techniques

    DOE Patents [OSTI]

    Szecsody, James E.

    2004-03-16

    An automated device that couples a pair of differently sized sample loops with a syringe pump and a source of degassed water. A fluid sample is mounted at an inlet port and delivered to the sample loops. A selected sample from the sample loops is diluted in the syringe pump with the degassed water and fed to a flow through detector for analysis. The sample inlet is also directly connected to the syringe pump to selectively perform analysis without dilution. The device is airtight and used to detect oxygen-sensitive species, such as dithionite in groundwater following a remedial injection to treat soil contamination.

  18. Automation of one-loop QCD corrections

    E-Print Network [OSTI]

    Valentin Hirschi; Rikkert Frederix; Stefano Frixione; Maria Vittoria Garzelli; Fabio Maltoni; Roberto Pittau

    2013-05-14

    We present the complete automation of the computation of one-loop QCD corrections, including UV renormalization, to an arbitrary scattering process in the Standard Model. This is achieved by embedding the OPP integrand reduction technique, as implemented in CutTools, into the MadGraph framework. By interfacing the tool so constructed, which we dub MadLoop, with MadFKS, the fully automatic computation of any infrared-safe observable at the next-to-leading order in QCD is attained. We demonstrate the flexibility and the reach of our method by calculating the production rates for a variety of processes at the 7 TeV LHC.

  19. Energy Automation Systems Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, AlabamaETEC GmbH JumpEllenville, NewLtd EIL JumpAutomation Systems Inc Jump to:

  20. Solar Automation Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-Enhancing Capacity forSilicium deEnergy Information North|SolaireAutomation Inc

  1. Ditec Automation Group | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar2-0057-EA Jump to: navigation,DepartmentCalculator JumpDitec Automation Group

  2. Automated Price and Demand Response Demonstration for Large Customers in New York City using OpenADR

    E-Print Network [OSTI]

    Kim, Joyce Jihyun

    2014-01-01

    2009. Open Automated Demand Response Communications2010. Open Automated Demand Response Technologies forenergy efficiency and demand response: Framework concepts

  3. Participation through Automation: Fully Automated Critical PeakPricing in Commercial Buildings

    SciTech Connect (OSTI)

    Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Kiliccote,Sila; Linkugel, Eric

    2006-06-20

    California electric utilities have been exploring the use of dynamic critical peak prices (CPP) and other demand response programs to help reduce peaks in customer electric loads. CPP is a tariff design to promote demand response. Levels of automation in DR can be defined as follows: Manual Demand Response involves a potentially labor-intensive approach such as manually turning off or changing comfort set points at each equipment switch or controller. Semi-Automated Demand Response involves a pre-programmed demand response strategy initiated by a person via centralized control system. Fully Automated Demand Response does not involve human intervention, but is initiated at a home, building, or facility through receipt of an external communications signal. The receipt of the external signal initiates pre-programmed demand response strategies. They refer to this as Auto-DR. This paper describes the development, testing, and results from automated CPP (Auto-CPP) as part of a utility project in California. The paper presents the project description and test methodology. This is followed by a discussion of Auto-DR strategies used in the field test buildings. They present a sample Auto-CPP load shape case study, and a selection of the Auto-CPP response data from September 29, 2005. If all twelve sites reached their maximum saving simultaneously, a total of approximately 2 MW of DR is available from these twelve sites that represent about two million ft{sup 2}. The average DR was about half that value, at about 1 MW. These savings translate to about 0.5 to 1.0 W/ft{sup 2} of demand reduction. They are continuing field demonstrations and economic evaluations to pursue increasing penetrations of automated DR that has demonstrated ability to provide a valuable DR resource for California.

  4. Demonstration of Datacenter Automation Software and Hardware (DASH) at the California Franchise Tax Board

    E-Print Network [OSTI]

    Bell, Geoffrey C.

    2010-01-01

    2009. Demonstration of Datacenter Automation Software andDemonstration of Datacenter Automation Software andand tested while other datacenter cooling best practices

  5. IFC BIM-Based Methodology for Semi-Automated Building Energy Performance Simulation

    E-Print Network [OSTI]

    Bazjanac, Vladimir

    2008-01-01

    of performing building energy performance simulation andto semi-automate building energy performance simulation andfor Semi-Automated Building Energy Performance Simulation

  6. Design and Implementation of an Open, Interoperable Automated Demand Response Infrastructure

    E-Print Network [OSTI]

    Piette, Mary Ann; Kiliccote, Sila; Ghatikar, Girish

    2008-01-01

    of Fully Automated Demand Response in Large Facilities. CEC-Fully Automated Demand Response Tests in Large Facilities.Management and Demand Response in Commercial Building. ,

  7. Demand Response and Open Automated Demand Response Opportunities for Data Centers

    E-Print Network [OSTI]

    Mares, K.C.

    2010-01-01

    Standardized Automated Demand Response Signals. Presented atand Automated Demand Response in Industrial RefrigeratedActions for Industrial Demand Response in California. LBNL-

  8. Opportunities for Energy Efficiency and Automated Demand Response in Industrial Refrigerated Warehouses in California

    E-Print Network [OSTI]

    Lekov, Alex

    2009-01-01

    your Power. (2008). "Demand Response Programs." RetrievedS. (2008). Automated Demand Response Results from Multi-Yearusing Open Automated Demand Response, California Energy

  9. Findings from Seven Years of Field Performance Data for Automated Demand Response in Commercial Buildings

    E-Print Network [OSTI]

    Kiliccote, Sila

    2010-01-01

    Open Automated Demand Response Demonstration Project” LBNL-2009a). “Open Automated Demand Response Communications inand Actions for Industrial Demand Response in California. ”

  10. Automated MEMS-based Drosophila embryo injection system for high-throughput RNAi screens

    E-Print Network [OSTI]

    Scott, Matthew

    Automated MEMS-based Drosophila embryo injection system for high-throughput RNAi screens Stefan developed an automated system based on microelectromechanical systems (MEMS) injectors for reliable mass

  11. Automated Text Classification in the DMOZ Lachlan Henderson

    E-Print Network [OSTI]

    Sanner, Scott

    Automated Text Classification in the DMOZ Hierarchy Lachlan Henderson November 6, 2009 Abstract The growth in the availability of on-line digital text documents has prompted considerable interest in Information Retrieval and Text Classification. Automation of the management of this wealth of textual data

  12. Automating Inspection and Documentation of Remote Building Construction

    E-Print Network [OSTI]

    Goldberg, Ken

    construction sites. Index Terms-- automation, construction, networked robots, pan-tilt-zoom camera, panoramic of the construction process over time to reduce travel costs and human risk. Recent developments in wireless1 Automating Inspection and Documentation of Remote Building Construction using a Robotic Camera

  13. MINING VENTILATION CONTROL: A NEW INDUSTRIAL CASE FOR WIRELESS AUTOMATION

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    MINING VENTILATION CONTROL: A NEW INDUSTRIAL CASE FOR WIRELESS AUTOMATION E. Witrant1, A. D- scribe a new industrial case on wireless automation, for a large scale system with high environmental- provements. Indeed, one of the first objectives of mod- ern mining industry is to fulfill ecological

  14. TEMPORAL PERFORMANCE EVALUATION OF CONTROL ARCHITECTURE IN AUTOMATION

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    TEMPORAL PERFORMANCE EVALUATION OF CONTROL ARCHITECTURE IN AUTOMATION SYSTEMS Pascal Meunier, Bruno, France pascal.meunier@lurpa.ens-cachan.fr (Pascal Meunier) Abstract The performances of automation are the merger of a hardware structure ­ industrial computers and logic controllers connected to networks

  15. Variability in Automated Responses of Commercial Buildings and Industrial

    E-Print Network [OSTI]

    LBNL-5129E Variability in Automated Responses of Commercial Buildings and Industrial Facilities;Variability in Automated Responses of Commercial Buildings and Industrial Facilities to Dynamic Electricity consumption of commercial buildings and industrial facilities (C&I facilities) during Demand Response (DR

  16. Mining ventilation control: a new industrial case for wireless automation

    E-Print Network [OSTI]

    Johansson, Karl Henrik

    - lated to motor system energy [2] (p.19). Another inter- esting figure is given in [3] whereMining ventilation control: a new industrial case for wireless automation E. Witrant1, A. D, 2008 Abstract This paper describes a new industrial case on wireless automation, for a large scale

  17. SCDBR: An Automated Reasoner for Database (Extended Abstract)

    E-Print Network [OSTI]

    Bertossi, Leopoldo

    . In general, theories of action and change, such as the specification of the evolution of a database, includeSCDBR: An Automated Reasoner for Database Updates (Extended Abstract) Leopoldo Bertossi, Marcelo In this paper we describe SCDBR, a system that automates reasoning with specifications of database updates

  18. Using personal computers for enhanced presence detection in building automation

    E-Print Network [OSTI]

    Delbruck, Tobi

    .ini.unizh.ch/~tobi Effective building automation depends on reliable sensors, but the usual passive infrared (PIR) sensorsUsing personal computers for enhanced presence detection in building automation Tobi Delbrück, Andi are blind to occupants who do not move around and are not personalized. We improve building intelligence

  19. Automated protocol selection for energy efficient WSN applications

    E-Print Network [OSTI]

    Atkinson, Robert C

    Automated protocol selection for energy efficient WSN applications C. Shen, S. Harte, E. Popovici the implementation of different protocols for different topology and appli- cation scenarios to optimise the overall Heterogeneous Automated Wireless Sensor (THAWS), embedding a reactive routing protocol, an energy

  20. Using GUI Ripping for Automated Testing of Android Applications

    E-Print Network [OSTI]

    Memon, Atif M.

    Using GUI Ripping for Automated Testing of Android Applications Domenico Amalfitano, Anna Rita Park, Maryland, USA atif@cs.umd.edu ABSTRACT We present AndroidRipper, an automated technique that tests Android apps via their Graphical User Interface (GUI). AndroidRipper is based on a user

  1. The Dependency Pair Framework: Combining Techniques for Automated Termination Proofs #

    E-Print Network [OSTI]

    Ábrahám, Erika

    The Dependency Pair Framework: Combining Techniques for Automated Termination Proofs # J of the most powerful techniques for automated termination proofs of term rewrite systems. Up to now of new methods for termination analy­ sis. To demonstrate this, we present several new techniques within

  2. Design and Control of a Fully Automated Vehicle door 

    E-Print Network [OSTI]

    Hong, Kyung-Min

    2010-07-14

    The objective of the research was to develop a fully automated vehicle car door that can detect any object obstructing its path during operation. A fully automated door concept has not yet been implemented in the car industry. The door, operated via...

  3. A Universal Automated Information System for Science and Technology

    E-Print Network [OSTI]

    Andrews, Peter B.

    A Universal Automated Information System for Science and Technology Peter B. Andrews Carnegie, applied sci- ence, and technology. Just as those searching for information on the web today tend to regard are likely to think of them as comprising a Universal Automated Information System for Science and Technology

  4. A Universal Automated Information System for Science and Technology

    E-Print Network [OSTI]

    Andrews, Peter B.

    A Universal Automated Information System for Science and Technology Peter B. Andrews Carnegie of mathematics, science, applied sci- ence, and technology. Just as those searching for information on the web of a Universal Automated Information System for Science and Technology having at least the following features

  5. Economic plantwide control: Automated controlled variable selection for

    E-Print Network [OSTI]

    Skogestad, Sigurd

    Economic plantwide control: Automated controlled variable selection for a reactor an optimal control structure for a complete chemical plant based on steady state plant economics, also known as economic plantwide control. In this work, we automated a key step of this procedure, which is the selection

  6. Automated analysis and interpretation of long-term

    E-Print Network [OSTI]

    Maher, Robert C.

    Automated analysis and interpretation of long-term soundscape audio recordings Robert C. Maher Electrical and Computer Engineering Montana State University - Bozeman #12;Outline · Introduction · Long · Interpretation and presentation is difficult due to extreme length of the data · What is needed: ­ Automated

  7. Exploring Shape Grammar Optimization as a Tool for Automated Design 

    E-Print Network [OSTI]

    Cazamias, Jordan A

    2013-09-24

    SHAPE GRAMMAR OPTIMIZATION AS A TOOL FOR AUTOMATED DESIGN An Undergraduate Research Scholars Thesis by JORDAN ALEXANDER CAZAMIAS Submitted to Honors and Undergraduate Research Texas A&M University in partial fulfillment... REFERENCES ............................................................................................................................. 23 1 ABSTRACT Exploring Shape Grammar Optimization as a Tool for Automated Design. (May 2014) Jordan...

  8. AUTOMATION OF ENERGY DEMAND FORECASTING Sanzad Siddique, B.S.

    E-Print Network [OSTI]

    Povinelli, Richard J.

    AUTOMATION OF ENERGY DEMAND FORECASTING by Sanzad Siddique, B.S. A Thesis submitted to the Faculty OF ENERGY DEMAND FORECASTING Sanzad Siddique, B.S. Marquette University, 2013 Automation of energy demand of the energy demand forecasting are achieved by integrating nonlinear transformations within the models

  9. Fast Automated Demand Response to Enable the Integration of Renewable

    E-Print Network [OSTI]

    LBNL-5555E Fast Automated Demand Response to Enable the Integration of Renewable Resources David S The work described in this report was coordinated by the Demand Response Research Center and funded ABSTRACT This study examines how fast automated demand response (AutoDR) can help mitigate grid balancing

  10. AUTOMATED LANDING SITE EVALUATION FOR SEMI-AUTONOMOUS

    E-Print Network [OSTI]

    Kochersberger, Kevin

    AUTOMATED LANDING SITE EVALUATION FOR SEMI-AUTONOMOUS UNMANNED AERIAL VEHICLES Dylan Klomparens for a vertical-takeoff-and- landing (VTOL) semi-autonomous unmanned aerial vehicle (UAV) from point cloud data Evaluation © 2008, Dylan Klomparens #12;AUTOMATED LANDING SITE EVALUATION FOR SEMI-AUTONOMOUS UNMANNED AERIAL

  11. Building Project Model Support for Automated Labor Monitoring

    E-Print Network [OSTI]

    Sacks, Rafael

    that full integration of automated data monitoring systems with building project models BPM is an effectiveBuilding Project Model Support for Automated Labor Monitoring R. Sacks1 ; R. Navon2 ; and E ADC , offers a solution to the problem. Integration with a computerized building project model BPM

  12. Optimization of Automated Float Glass Lines Byungsoo Na, Shabbir Ahmed

    E-Print Network [OSTI]

    Ahmed, Shabbir

    Optimization of Automated Float Glass Lines Byungsoo Na, Shabbir Ahmed , George Nemhauser and Joel flat glass products being manufactured on float glass lines. New technologies are allowing float glass manufacturers to increase the level of automation in their plants, but the question of how to effectively use

  13. Making your Building Smarter : The Retrofit Challenge 

    E-Print Network [OSTI]

    Brady, N.

    2012-01-01

    integration environments - need to merge/operate with BMS and legacy systems ?Implemented technologies are optimised for their own application - can compete or interfere with each other or lead to a non overall optimised environment ?Building Sensor... Smart Building ?Gotchas? Examples ? Emergency lighting signs in front of the PIRs ?Missing meeting room automated door closers to avoid triggering PIR?s on walk by ? Automated window shading system reacting to background radiation levels...

  14. Tips: Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tips: Lighting Tips: Lighting Lighting choices save you money. Energy-efficient light bulbs are available in a wide variety of sizes and shapes. Lighting choices save you money....

  15. Development and evaluation of fully automated demand response in large facilities

    SciTech Connect (OSTI)

    Piette, Mary Ann; Sezgen, Osman; Watson, David S.; Motegi, Naoya; Shockman, Christine; ten Hope, Laurie

    2004-03-30

    This report describes the results of a research project to develop and evaluate the performance of new Automated Demand Response (Auto-DR) hardware and software technology in large facilities. Demand Response (DR) is a set of activities to reduce or shift electricity use to improve electric grid reliability, manage electricity costs, and ensure that customers receive signals that encourage load reduction during times when the electric grid is near its capacity. The two main drivers for widespread demand responsiveness are the prevention of future electricity crises and the reduction of electricity prices. Additional goals for price responsiveness include equity through cost of service pricing, and customer control of electricity usage and bills. The technology developed and evaluated in this report could be used to support numerous forms of DR programs and tariffs. For the purpose of this report, we have defined three levels of Demand Response automation. Manual Demand Response involves manually turning off lights or equipment; this can be a labor-intensive approach. Semi-Automated Response involves the use of building energy management control systems for load shedding, where a preprogrammed load shedding strategy is initiated by facilities staff. Fully-Automated Demand Response is initiated at a building or facility through receipt of an external communications signal--facility staff set up a pre-programmed load shedding strategy which is automatically initiated by the system without the need for human intervention. We have defined this approach to be Auto-DR. An important concept in Auto-DR is that a facility manager is able to ''opt out'' or ''override'' an individual DR event if it occurs at a time when the reduction in end-use services is not desirable. This project sought to improve the feasibility and nature of Auto-DR strategies in large facilities. The research focused on technology development, testing, characterization, and evaluation relating to Auto-DR. This evaluation also included the related decisionmaking perspectives of the facility owners and managers. Another goal of this project was to develop and test a real-time signal for automated demand response that provided a common communication infrastructure for diverse facilities. The six facilities recruited for this project were selected from the facilities that received CEC funds for new DR technology during California's 2000-2001 electricity crises (AB970 and SB-5X).

  16. Deficiencies of Lighting Codes and Ordinances in Controlling Light Pollution from Parking Lot Lighting Installations

    E-Print Network [OSTI]

    Royal, Emily

    2012-05-31

    The purpose of this research was to identify the main causes of light pollution from parking lot electric lighting installations and highlight the deficiencies of lighting ordinances in preventing light pollution. Using an industry-accepted lighting...

  17. OpenGL Lighting 13. OpenGL Lighting

    E-Print Network [OSTI]

    McDowell, Perry

    OpenGL Lighting 13. OpenGL Lighting · Overview of Lighting in OpenGL In order for lighting to have an effect in OpenGL, two things are required: A light An object to be lit Lights can be set to any color determine how they reflect the light which hits them. The color(s) of an object is determined

  18. CONNECTED LIGHTING SYSTEMS MEETING

    Office of Energy Efficiency and Renewable Energy (EERE)

    There is a lot of buzz today about the Internet of Things and the convergence of intelligent controllable light sources, communication networks, sensors, and data exchange in future lighting...

  19. Fast Light, Fast Neutrinos?

    E-Print Network [OSTI]

    Kevin Cahill

    2011-10-10

    In certain media, light has been observed with group velocities faster than the speed of light. The recent OPERA report of superluminal 17 GeV neutrinos may describe a similar phenomenon.

  20. Kyler Nelson Light Timer

    E-Print Network [OSTI]

    Kachroo, Pushkin

    designated by the user, the Arduino board will dim the light to save energy. The user designates the time instance, the light is dimmed using pulse width modulation (PWM) in the Arduino's pin number 11

  1. Automatic lighting controls demonstration

    SciTech Connect (OSTI)

    Rubinstein, F.; Verderber, R.

    1990-03-01

    The purpose of this work was to demonstrate, in a real building situation, the energy and peak demand reduction capabilities of an electronically ballasted lighting control system that can utilize all types of control strategies to efficiently manage lighting. The project has demonstrated that a state-of-the-art electronically ballasted dimmable lighting system can reduce energy and lighting demand by as least 50% using various combinations of control strategies. By reducing light levels over circulation areas (tuning) and reducing after hours light levels to accommodate the less stringent lighting demands of the cleaning crew (scheduling), lighting energy consumption on weekdays was reduced an average of 54% relative to the initial condition. 10 refs., 14 figs., 3 tabs.

  2. Lighting and Daylight Harvesting 

    E-Print Network [OSTI]

    Bos, J.

    2011-01-01

    in 1992 to serve the lighting design needs of the architectural and interior design communities. With over fifty years of combined experience, our areas of expertise range from architectural and theatrical lighting to custom fixture design. Bos... Lighting Design We are active members of the International Association of Lighting Designers, the American Institute of Architects, the Illuminating Engineering Society, International Dark Skies Association and the United States Green Building Council...

  3. LED Lighting Retrofit 

    E-Print Network [OSTI]

    Shaw-Meadow, N.

    2011-01-01

    kWh is the one that never gets used? ?Dedicated to making environmentally responsible products? Ringdale Introduction LED Roadway Lighting Better Light, Fewer Watts. Period. Nathan Shaw-Meadow LED Lighting Specialist Ringdale ActiveLED ESL.../exponential efficiency growth often deters investment today 7 Challenges to Implementation ESL-KT-11-11-57 CATEE 2011, Dallas, Texas, Nov. 7 ? 9, 2011 ? Municipal Street Light Case Study 8 ? Replaced 400W High Pressure Sodium fixtures with 52W Active...

  4. Light emitting device comprising phosphorescent materials for white light generation

    DOE Patents [OSTI]

    Thompson, Mark E.; Dapkus, P. Daniel

    2014-07-22

    The present invention relates to phosphors for energy downconversion of high energy light to generate a broadband light spectrum, which emit light of different emission wavelengths.

  5. And the Oscar for Sustainable Mobile Lighting Goes to.... Lighting...

    Energy Savers [EERE]

    And the Oscar for Sustainable Mobile Lighting Goes to.... Lighting Up Operations with Hydrogen and Fuel Cell Technology And the Oscar for Sustainable Mobile Lighting Goes to.......

  6. The Automated Bicron Tester: Automated electronic instrument diagnostic, testing, and alignment system with records generation

    SciTech Connect (OSTI)

    Rao, G.S.; Maddox, S.R.; Turner, G.W.; Vandermolen, R.I.

    1995-11-01

    The Bicron Surveyor MX is a portable radiation monitoring instrument used by the Office of Radiation Protection at Oak Ridge National Laboratory. This instrument must be calibrated in order to assure reliable operation. A manual calibration procedure was developed, but it was time consuming and repetitive. Therefore, an automated tester station that would allow the technicians to calibrate the instruments faster and more reliably was developed. With the automated tester station, calibration records and accountability could be generated and maintained automatically. This allows the technicians to concentrate on repairing defective units. The Automated Bicron Tester consists of an operator interface, an analog board, and a digital controller board. The panel is the user interface that allows the technician to communicate with the tester. The analog board has an analog-to-digital converter (ADC) that converts the signals from the instrument into digital data that the tester can manipulate. The digital controller board contains the circuitry to perform the test and to communicate the results to the host personal computer (PC). The tester station is connected to the unit under test through a special test harness that attaches to a header on the Bicron. The tester sends pulse trains to the Bicron and measures the resulting meter output. This is done to determine if the unit is functioning properly. The testers are connected to the host PC through an RS-485 serial line. The host PC polls all the tester stations that are connected to it and collects data from those that have completed a calibration. It logs these data and stores the record in a format ready for export to the Maintenance, Accountability, Jobs, and Inventory Control (MAJIC) database. It also prints a report. The programs for the Automated Bicron Tester and the host are written in the C language.

  7. Identifying Requirements for Effective Human-Automation Teamwork

    SciTech Connect (OSTI)

    Jeffrey C. Joe; John O'Hara; Heather D. Medema; Johanna H. Oxstrand

    2014-06-01

    Previous studies have shown that poorly designed human-automation collaboration, such as poorly designed communication protocols, often leads to problems for the human operators, such as: lack of vigilance, complacency, and loss of skills. These problems often lead to suboptimal system performance. To address this situation, a considerable amount of research has been conducted to improve human-automation collaboration and to make automation function better as a “team player.” Much of this research is based on an understanding of what it means to be a good team player from the perspective of a human team. However, the research is often based on a simplified view of human teams and teamwork. In this study, we sought to better understand the capabilities and limitations of automation from the standpoint of human teams. We first examined human teams to identify the principles for effective teamwork. We next reviewed the research on integrating automation agents and human agents into mixed agent teams to identify the limitations of automation agents to conform to teamwork principles. This research resulted in insights that can lead to more effective human-automation collaboration by enabling a more realistic set of requirements to be developed based on the strengths and limitations of all agents.

  8. Automated behavioural fingerprinting of C. elegans mutants

    E-Print Network [OSTI]

    Brown, André E X

    2013-01-01

    Rapid advances in genetics, genomics, and imaging have given insight into the molecular and cellular basis of behaviour in a variety of model organisms with unprecedented detail and scope. It is increasingly routine to isolate behavioural mutants, clone and characterise mutant genes, and discern the molecular and neural basis for a behavioural phenotype. Conversely, reverse genetic approaches have made it possible to straightforwardly identify genes of interest in whole-genome sequences and generate mutants that can be subjected to phenotypic analysis. In this latter approach, it is the phenotyping that presents the major bottleneck; when it comes to connecting phenotype to genotype in freely behaving animals, analysis of behaviour itself remains superficial and time consuming. However, many proof-of-principle studies of automated behavioural analysis over the last decade have poised the field on the verge of exciting developments that promise to begin closing this gap. In the broadest sense, our goal in this...

  9. Automated interferometric alignment system for paraboloidal mirrors

    DOE Patents [OSTI]

    Maxey, L. Curtis (Powell, TN)

    1993-01-01

    A method is described for a systematic method of interpreting interference fringes obtained by using a corner cube retroreflector as an alignment aid when aigning a paraboloid to a spherical wavefront. This is applicable to any general case where such alignment is required, but is specifically applicable in the case of aligning an autocollimating test using a diverging beam wavefront. In addition, the method provides information which can be systematically interpreted such that independent information about pitch, yaw and focus errors can be obtained. Thus, the system lends itself readily to automation. Finally, although the method is developed specifically for paraboloids, it can be seen to be applicable to a variety of other aspheric optics when applied in combination with a wavefront corrector that produces a wavefront which, when reflected from the correctly aligned aspheric surface will produce a collimated wavefront like that obtained from the paraboloid when it is correctly aligned to a spherical wavefront.

  10. Automated interferometric alignment system for paraboloidal mirrors

    DOE Patents [OSTI]

    Maxey, L.C.

    1993-09-28

    A method is described for a systematic method of interpreting interference fringes obtained by using a corner cube retroreflector as an alignment aid when aligning a paraboloid to a spherical wavefront. This is applicable to any general case where such alignment is required, but is specifically applicable in the case of aligning an autocollimating test using a diverging beam wavefront. In addition, the method provides information which can be systematically interpreted such that independent information about pitch, yaw and focus errors can be obtained. Thus, the system lends itself readily to automation. Finally, although the method is developed specifically for paraboloids, it can be seen to be applicable to a variety of other aspheric optics when applied in combination with a wavefront corrector that produces a wavefront which, when reflected from the correctly aligned aspheric surface will produce a collimated wavefront like that obtained from the paraboloid when it is correctly aligned to a spherical wavefront. 14 figures.

  11. An automated neutron monitor maintenance system

    SciTech Connect (OSTI)

    Moore, F.S.; Griffin, J.C.; Odell, D.M.C.

    1996-09-01

    Neutron detectors are commonly used by the nuclear materials processing industry to monitor fissile materials in process vessels and tanks. The proper functioning of these neutron monitors must be periodically evaluated. We have developed and placed in routine use a PC-based multichannel analyzer (MCA) system for on-line BF3 and He-3 gas-filled detector function testing. The automated system: 1) acquires spectral data from the monitor system, 2) analyzes the spectrum to determine the detector`s functionality, 3) makes suggestions for maintenance or repair, as required, and 4) saves the spectrum and results to disk for review. The operator interface has been designed to be user-friendly and to minimize the training requirements of the user. The system may also be easily customized for various applications

  12. Building automation systems (BAS) are concerned with control and monitoring of buildings, while aiming to

    E-Print Network [OSTI]

    Clausen, Michael

    Building automation systems (BAS) are concerned with control and monitoring of buildings, while operating and energy costs Realization and Experiences with a Low-Cost Building Automation Security Testbed for Educational Purposes BUILDING AUTOMATION SYSTEMS Building automation systems dearth the aspect of security

  13. Test Automation with TTCN-3 -State of the Art and a Future Perspective

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Test Automation with TTCN-3 - State of the Art and a Future Perspective Ina Schieferdecker TU.schieferdecker@fokus.fraunhofer.de Abstract. Test automation encompasses all activities to automate various steps in the overall testing process including automation of test management, test generation, or test execution. The standardized

  14. Between automation and exploration: SAS graphing techniques for visualization of survey data

    E-Print Network [OSTI]

    Yu, Alex

    Between automation and exploration: SAS graphing techniques for visualization of survey data Chong of survey data. There is always a tension between automation and exploration. Automation is a common to automate the graphing processes via SAS/Macros and SAS/Graph. However, hidden patterns of the data may

  15. American Institute of Aeronautics and Astronautics Automation Bias in Intelligent Time Critical Decision

    E-Print Network [OSTI]

    Cummings, Mary "Missy"

    American Institute of Aeronautics and Astronautics 1 Automation Bias in Intelligent Time Critical levels of automation can be introduced by intelligent decision support systems, from fully automated, where the operator is completely left out of the decision process, to minimal levels of automation

  16. The State of the Art in Automation of Earthmoving Sanjiv Singh

    E-Print Network [OSTI]

    Singh, Sanjiv

    The State of the Art in Automation of Earthmoving Sanjiv Singh System Scientist Robotics Institute automation of earthmoving machines, such as backhoes, loaders, and dozers, reflects a larger movement automated systems reported in the literature, can be classified. Key Words: automation, earthmoving

  17. A Simple Application of Fuzzy Arithmetic to Automate the Alignment of a Crystal in Channeling Experiments

    E-Print Network [OSTI]

    Ruiz-Sanchez, F J; Crespo-Sosa, A

    1999-01-01

    A Simple Application of Fuzzy Arithmetic to Automate the Alignment of a Crystal in Channeling Experiments

  18. An Automated System for Converting App Inventor Apps to Java Interface For Creating and Managing Projects

    E-Print Network [OSTI]

    Gray, Jeffrey G.

    An Automated System for Converting App Inventor Apps to Java Interface For Creating and Managing of Computer Science Graphical Environment For Creating Layouts MIT App Inventor An Automated System for Converting App Inventor Apps to JavaAn Automated System for Converting App Inventor Apps to JavaAn Automated

  19. Automated Critical Peak Pricing Field Tests: Program Descriptionand Results

    SciTech Connect (OSTI)

    Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila; Xu, Peng

    2006-04-06

    California utilities have been exploring the use of critical peak prices (CPP) to help reduce needle peaks in customer end-use loads. CPP is a form of price-responsive demand response (DR). Recent experience has shown that customers have limited knowledge of how to operate their facilities in order to reduce their electricity costs under CPP (Quantum 2004). While the lack of knowledge about how to develop and implement DR control strategies is a barrier to participation in DR programs like CPP, another barrier is the lack of automation of DR systems. During 2003 and 2004, the PIER Demand Response Research Center (DRRC) conducted a series of tests of fully automated electric demand response (Auto-DR) at 18 facilities. Overall, the average of the site-specific average coincident demand reductions was 8% from a variety of building types and facilities. Many electricity customers have suggested that automation will help them institutionalize their electric demand savings and improve their overall response and DR repeatability. This report focuses on and discusses the specific results of the Automated Critical Peak Pricing (Auto-CPP, a specific type of Auto-DR) tests that took place during 2005, which build on the automated demand response (Auto-DR) research conducted through PIER and the DRRC in 2003 and 2004. The long-term goal of this project is to understand the technical opportunities of automating demand response and to remove technical and market impediments to large-scale implementation of automated demand response (Auto-DR) in buildings and industry. A second goal of this research is to understand and identify best practices for DR strategies and opportunities. The specific objectives of the Automated Critical Peak Pricing test were as follows: (1) Demonstrate how an automated notification system for critical peak pricing can be used in large commercial facilities for demand response (DR). (2) Evaluate effectiveness of such a system. (3) Determine how customers will respond to this form of automation for CPP. (4) Evaluate what type of DR shifting and shedding strategies can be automated. (5) Explore how automation of control strategies can increase participation rates and DR saving levels with CPP. (6) Identify optimal demand response control strategies. (7) Determine occupant and tenant response.

  20. Lighting Design | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Design Lighting Design Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of...

  1. Architecture Concepts and Technical Issues for an Open,Interoperable Automated Demand Response Infrastructure

    SciTech Connect (OSTI)

    Koch, Ed; Piette, Mary Ann

    2007-10-01

    This paper presents the technical and architectural issues associated with automating Demand Response (DR) programs. The paper focuses on a description of the Demand Response Automation Server (DRAS), which is the main component used to automate the interactions between the Utilities and their customers for DR programs. Use cases are presented that show the role of the DRAS in automating various aspects of DR programs. This paper also describes the various technical aspects of the DRAS including its interfaces and major modes of operation. This includes how the DRAS supports automating such Utility/Customer interactions as automated DR bidding, automated DR event handling, and finally real-time pricing.

  2. Light extraction from organic light-emitting diodes for lighting applications by sand-blasting

    E-Print Network [OSTI]

    Light extraction from organic light-emitting diodes for lighting applications by sand@ust.hk Abstract: Light extraction from organic light-emitting diodes (OLEDs) by scattering the light is one of the effective methods for large-area lighting applications. In this paper, we present a very simple and cost

  3. Induction Lighting: An Old Lighting Technology Made New Again

    Broader source: Energy.gov [DOE]

    Induction lighting is one of the best kept secrets in energy-efficient lighting. Simply stated, induction lighting is essentially a fluorescent light without electrodes or filaments, the items that...

  4. Lighting the Night: Technology, Urban Life and the Evolution of Street Lighting [Light in Place

    E-Print Network [OSTI]

    Holden, Alfred

    1992-01-01

    Electrical 16. "Highway Lighting by So­ dium Vapor Lamps,"Possibilities of Street: Lighting Improve­ ments," TheLaunches Broad Street Lighting Promotion Campaign," The

  5. ECE 466: LED Lighting Systems -Incandescent lightings rise and

    E-Print Network [OSTI]

    Connors, Daniel A.

    ECE 466: LED Lighting Systems - Incandescent lightings rise and demise via government policy - Alternative Fluorescent light sources and compact fluorescent lights (CFL) to incandescents - Alternative LED light sources - Color index as well as Watts to Lumens efficiency available from all three light sources

  6. Lighting and Surfaces 11.1 Introduction to Lighting

    E-Print Network [OSTI]

    Boyd, John P.

    Chapter 11 Lighting and Surfaces 11.1 Introduction to Lighting Three-dimensional surfaces can react to light, and how computer graphics simulates this. There are three species of light (or "illumination models"): 1. Intrinsic (self-emitting) 2. Ambient light (sometimes called "diffuse light") 3

  7. Creating new operational concepts for global automated ATM systems

    E-Print Network [OSTI]

    Simpson, R. W.

    1995-01-01

    With the availability of new CNS technologies (Communications, Navigation and Guidance, Surveillance) as described by the ICAO FANS agreement and the potential of new tools for Automation at the ATC controller's console, ...

  8. Architecture for an Automated Management Instrumentation of Component Based

    E-Print Network [OSTI]

    Architecture for an Automated Management Instrumentation of Component Based Applications Rainer management cannot provide this kind of user­oriented information. At present, only instrumentation techniques are suited to provide the required information. On the other hand instrumentation techniques cause

  9. Architecture for an Automated Management Instrumentation of Component Based

    E-Print Network [OSTI]

    Architecture for an Automated Management Instrumentation of Component Based Applications Rainer management cannot provide this kind of user-oriented information. At present, only instrumentation techniques are suited to provide the required information. On the other hand instrumentation techniques cause

  10. Human-automation collaborative RRT for UAV mission path planning

    E-Print Network [OSTI]

    Caves, Américo De Jesús (Caves Corral)

    2010-01-01

    Future envisioned Unmanned Aerial Vehicle (UAV) missions will be carried out in dynamic and complex environments. Human-automation collaboration will be required in order to distribute the increased mission workload that ...

  11. Automated construction technologies : analyses and future development strategies

    E-Print Network [OSTI]

    Hoang, Han (Han Mai)

    2005-01-01

    Substandard productivity and the lack of skilled workers in the construction industry have led major corporations all over the world aiming to produce various types of automated construction technologies. During the process, ...

  12. Design and implementation of an automated battery management platform

    E-Print Network [OSTI]

    Toksoz, Tuna

    2012-01-01

    This thesis describes the design and the implementation of the hardware platform for automated battery management with battery changing/charging capability for autonomous UAV missions with persistency requirement that ...

  13. HEADLINE: DOE Pursues Automation in West Virginia Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of a Smart Grid. So, what exactly does this Smart Grid distribution automation system look like? As always, interoperability is a factor. First, it's vital for a utility to...

  14. Creating Automated Interactive Video Playback for Studies of Animal Communications 

    E-Print Network [OSTI]

    Butkowski, Trisha

    2010-01-16

    -time animations with video tracking software. This method may be used to conduct interactive playback experiments. To demonstrate this method, a prototype was created and used to conduct automated mating choice trials on female swordtail fish. The results...

  15. Automating journey fare calculation for transport for London

    E-Print Network [OSTI]

    Maciejewski, Joshua J. (Joshua John)

    2008-01-01

    This thesis develops a method to automate journey fare calculation for Transport for London. Today, fares for every possible origin-destination station pair within the London Underground are prepared manually based on the ...

  16. Automated Discovery of Functional Generality of Human Gene Expression Programs

    E-Print Network [OSTI]

    Williams, Brian C.

    ,2 , Robin D. Dowell1 , Tommi S. Jaakkola1 , David K. Gifford1,3* 1 Department of Computer Science: Gerber GK, Dowell RD, Jaakkola TS, Gifford DK (2007) Automated discovery of functional generality

  17. Proceedings of the IEEE International Conference on Mechatronics & Automation

    E-Print Network [OSTI]

    Krovi, Venkat

    Proceedings of the IEEE International Conference on Mechatronics & Automation Niagara Falls, Canada research methodologies that have revolutionized the mechatronics domain. In particular, this work the process of design, analysis, and validation of various electromechanical and mechatronic systems

  18. Automating Spoken Dialogue Systems Mona Singh,1,2

    E-Print Network [OSTI]

    Automating Spoken Dialogue Systems Mona Singh,1,2 James Barnett,2 Munindar P. Singh1 1 Department construction [6]. Mona Singh and James Barnett are supported by the National Institute of Standards

  19. Radioanalytical Chemistry for Automated Nuclear Waste Process Monitoring

    SciTech Connect (OSTI)

    Jay W. Grate; Timothy A. DeVol

    2006-07-20

    The objectives of our research were to develop the first automated radiochemical process analyzer including sample pretreatment methodoology, and to initiate work on new detection approaches, especially using modified diode detectors.

  20. Evaluation Criteria for Human-Automation Performance Metrics

    E-Print Network [OSTI]

    Pina, Patricia Elena

    Previous research has identified broad metric classes for human-automation performance to facilitate metric selection, as well as understanding and comparison of research results. However, there is still lack of an objective ...

  1. Automated Metadata Construction To Support Portable Building Applications

    E-Print Network [OSTI]

    Weimer, Westley

    ; Sensor Metadata; Portable Building Applications; Metadata Normalization 1. INTRODUCTION While advancesAutomated Metadata Construction To Support Portable Building Applications Arka A. Bhattacharya UC in buildings with digital control systems [23] comprised of wired sensor networks. These sensors have scant

  2. Design Automation for Microfluidics-Based KRISHNENDU CHAKRABARTY

    E-Print Network [OSTI]

    Chakrabarty, Krishnendu

    Design Automation for Microfluidics-Based Biochips KRISHNENDU CHAKRABARTY Duke University and JUN ZENG Coventor, Inc. Advances in microfluidics technology offer exciting possibilities in the realm, implantable drug delivery devices, and environmental toxicity monitoring. Microfluidics-based biochips

  3. Human-Machine Interface in Building Automation Systems 

    E-Print Network [OSTI]

    Sobczak, N. L.

    1981-01-01

    problem between the non-computer knowledgeable operator and the computer based Building Automation System. One of the solutions to this problem is the design and implementation of a human machine interface which educates the operator to utilize the system...

  4. Summary of the 2006 Automated Demand Response Pilot 

    E-Print Network [OSTI]

    Piette, M.; Kiliccote, S.

    2007-01-01

    This paper discusses the specific concept for, design of, and results from a pilot program to automate demand response with critical peak pricing. California utilities have been exploring the use of critical peak pricing (CPP) to help reduce peak...

  5. Assessing the performance of human-automation collaborative planning systems

    E-Print Network [OSTI]

    Ryan, Jason C. (Jason Christopher)

    2011-01-01

    Planning and Resource Allocation (P/RA) Human Supervisory Control (HSC) systems utilize the capabilities of both human operators and automated planning algorithms to schedule tasks for complex systems. In these systems, ...

  6. Market Maker V Automated Order Book Markets: UK Evidence 

    E-Print Network [OSTI]

    Creswell, Phil

    2003-01-01

    The London Stock Exchange operates two separate trading platforms for UK equities: an automated limit order book (SETS) and a multiple dealer market (SEAQ). This paper examines the relative efficiency of the different ...

  7. Automated Inclusive Design Heuristics Generation with Graph Mining 

    E-Print Network [OSTI]

    Sangelkar, Shraddha Chandrakant

    2013-08-01

    from existing inclusive products. Formalization results show that, the rate of rule generation decreases as more products are added to the dataset. The automated method is particularly helpful in the developmental stages of graph mining applications...

  8. Characterization of Gulf of Mexico Clay Using Automated Triaxial Testing 

    E-Print Network [OSTI]

    Murali, Madhuri

    2012-02-14

    . This thesis presents the results of SHANSEP triaxial testing performed on undisturbed samples of Gulf of Mexico clay. Background information is given about the clay, the sampling program and the laboratory testing program. The GEOTAC Truepath automated stress...

  9. Experiments in Automating Hardware Verification using Inductive Proof Planning 

    E-Print Network [OSTI]

    Cantu, Francisco; Bundy, Alan; Smaill, Alan; Basin, David

    1996-01-01

    We present a new approach to automating the verification of hardware designs based on planning techniques. A database of methods is developed that combines tactics, which construct proofs, using specifications of their ...

  10. Automated Home Energy Management Standing Technical Committee Presentation

    Broader source: Energy.gov [DOE]

    This presentation outlines the goals of the Automated Home Energy Management Standing Technical Committee, as presented at the Building America Spring 2012 Stakeholder meeting on February 29, 2012, in Austin, Texas.

  11. Sandia Energy - Light Creation Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Light Creation Materials Home Energy Research EFRCs Solid-State Lighting Science EFRC Overview Light Creation Materials Light Creation MaterialsAlyssa Christy2015-03-26T16:28:52+00...

  12. Arnold Schwarzenegger LIGHTING RESEARCH PROGRAM

    E-Print Network [OSTI]

    Project Summaries ELEMENT 2: ADVANCE LIGHTING TECHNOLOGIES PROJECT 2.1 LIGHT EMITTING DIODE (LED light emitting diodes (LED) technology for general lighting applications by developing a task lamp

  13. Automation, Robotics & Mechatronics Laboratory The Automation Robotics & Mechatronics (ARM) Lab is located at 1022 Furnas Hall on the North Campus of the University

    E-Print Network [OSTI]

    Krovi, Venkat

    Automation, Robotics & Mechatronics Laboratory The Automation Robotics & Mechatronics (ARM) Lab location and enter the Building marked 39 (Furnas Hall) in the map above and take the elevator to the 10th

  14. Demand Response and Open Automated Demand Response Opportunities for Data Centers

    SciTech Connect (OSTI)

    Ghatikar, Girish; Piette, Mary Ann; Fujita, Sydny; McKane, Aimee; Dudley, Junqiao Han; Radspieler, Anthony; Mares, K.C.; Shroyer, Dave

    2009-12-30

    This study examines data center characteristics, loads, control systems, and technologies to identify demand response (DR) and automated DR (Open Auto-DR) opportunities and challenges. The study was performed in collaboration with technology experts, industrial partners, and data center facility managers and existing research on commercial and industrial DR was collected and analyzed. The results suggest that data centers, with significant and rapidly growing energy use, have significant DR potential. Because data centers are highly automated, they are excellent candidates for Open Auto-DR. 'Non-mission-critical' data centers are the most likely candidates for early adoption of DR. Data center site infrastructure DR strategies have been well studied for other commercial buildings; however, DR strategies for information technology (IT) infrastructure have not been studied extensively. The largest opportunity for DR or load reduction in data centers is in the use of virtualization to reduce IT equipment energy use, which correspondingly reduces facility cooling loads. DR strategies could also be deployed for data center lighting, and heating, ventilation, and air conditioning. Additional studies and demonstrations are needed to quantify benefits to data centers of participating in DR and to address concerns about DR's possible impact on data center performance or quality of service and equipment life span.

  15. Automated Demand Response Opportunities in Wastewater Treatment Facilities

    SciTech Connect (OSTI)

    Thompson, Lisa; Song, Katherine; Lekov, Alex; McKane, Aimee

    2008-11-19

    Wastewater treatment is an energy intensive process which, together with water treatment, comprises about three percent of U.S. annual energy use. Yet, since wastewater treatment facilities are often peripheral to major electricity-using industries, they are frequently an overlooked area for automated demand response opportunities. Demand response is a set of actions taken to reduce electric loads when contingencies, such as emergencies or congestion, occur that threaten supply-demand balance, and/or market conditions occur that raise electric supply costs. Demand response programs are designed to improve the reliability of the electric grid and to lower the use of electricity during peak times to reduce the total system costs. Open automated demand response is a set of continuous, open communication signals and systems provided over the Internet to allow facilities to automate their demand response activities without the need for manual actions. Automated demand response strategies can be implemented as an enhanced use of upgraded equipment and facility control strategies installed as energy efficiency measures. Conversely, installation of controls to support automated demand response may result in improved energy efficiency through real-time access to operational data. This paper argues that the implementation of energy efficiency opportunities in wastewater treatment facilities creates a base for achieving successful demand reductions. This paper characterizes energy use and the state of demand response readiness in wastewater treatment facilities and outlines automated demand response opportunities.

  16. High efficiency incandescent lighting

    DOE Patents [OSTI]

    Bermel, Peter; Ilic, Ognjen; Chan, Walker R.; Musabeyoglu, Ahmet; Cukierman, Aviv Ruben; Harradon, Michael Robert; Celanovic, Ivan; Soljacic, Marin

    2014-09-02

    Incandescent lighting structure. The structure includes a thermal emitter that can, but does not have to, include a first photonic crystal on its surface to tailor thermal emission coupled to, in a high-view-factor geometry, a second photonic filter selected to reflect infrared radiation back to the emitter while passing visible light. This structure is highly efficient as compared to standard incandescent light bulbs.

  17. National Synchrotron Light Source

    ScienceCinema (OSTI)

    BNL

    2009-09-01

    A tour of Brookhaven's National Synchrotron Light Source (NSLS), hosted by Associate Laboratory Director for Light Sources, Stephen Dierker. The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviolet, and x-ray light for basic and applied research in physics, chemistry, medicine, geophysics, environmental, and materials sciences.

  18. Faster Than Light?

    E-Print Network [OSTI]

    Robert Geroch

    2010-05-10

    It is argued that special relativity remains a viable physical theory even when there is permitted signals traveling faster than light.

  19. Comparing Light Bulbs

    Office of Energy Efficiency and Renewable Energy (EERE)

    In this exercise, students will use a light to demonstrate the difference between being energy-efficient and energy-wasteful, and learn what energy efficiency means.

  20. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Illuminance Assignments for CBECS Building Activity Categories Illuminance ranges were adopted from the 1987 Illuminating Engineering Society (IES) Lighting Handbook. The IES...

  1. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    from the engineering literature, based on CBECS building activity.) 4. Efficacy: an energy efficiency measure. Technically, the amount of light produced per unit of energy...

  2. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    (CEC), March 1990. Advanced Lighting Technologies Application Guidelines (ALTAG), Building and Appliance Efficiency Office. 3. Dubin, F.S., Mindell, H.L., and Bloome, S., 1976....

  3. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    energy are presented in this section. Statistics are presented by subgroups based on building characteristics, and by subgroups based on lighting equipment. The three sets of...

  4. Follicular unit extraction hair transplant automation: Options in overcoming challenges of the latest technology in hair restoration with the goal of avoiding the line scar

    E-Print Network [OSTI]

    Rashid, Rashid M; Bicknell, Lindsay T Morgan

    2012-01-01

    extraction hair transplant automation: Options in overcomingis also required [ 4 ]. Automation of various steps of FUEFor example, with automation, increased harvest numbers are

  5. Automated high pressure cell for pressure jump x-ray diffraction

    SciTech Connect (OSTI)

    Brooks, Nicholas J.; Gauthe, Beatrice L. L. E.; Templer, Richard H.; Ces, Oscar; Seddon, John M.; Terrill, Nick J.; Rogers, Sarah E.

    2010-06-15

    A high pressure cell for small and wide-angle x-ray diffraction measurements of soft condensed matter samples has been developed, incorporating a fully automated pressure generating network. The system allows both static and pressure jump measurements in the range of 0.1-500 MPa. Pressure jumps can be performed as quickly as 5 ms, both with increasing and decreasing pressures. Pressure is generated by a motorized high pressure pump, and the system is controlled remotely via a graphical user interface to allow operation by a broad user base, many of whom may have little previous experience of high pressure technology. Samples are loaded through a dedicated port allowing the x-ray windows to remain in place throughout an experiment; this facilitates accurate subtraction of background scattering. The system has been designed specifically for use at beamline I22 at the Diamond Light Source, United Kingdom, and has been fully integrated with the I22 beamline control systems.

  6. AUTOMATED BATCH CHARACTERIZATION OF ICF SHELLS WITH VISION-ENABLED OPTICAL MICROSCOPE SYSTEM

    SciTech Connect (OSTI)

    HUANG,H; STEPHENS,R.B; HILL,D.W; LYON,C; NIKROO,A; STEINMAN,D.A

    2003-06-01

    OAK-B135 Inertial Confinement Fusion (ICF) shells are mesoscale objects with nano-scale dimensional and nano-surface finish requirements. Currently, the shell dimensions are measured by white-light interferometry and an image analysis method. These two methods complement each other and give a rather complete data set on a single shell. The process is, however, labor intensive. They have developed an automation routine to fully characterize a shell in one shot and perform unattended batch measurements. The method is useful to the ICF program both for production screening and for full characterization. It also has potential for Inertial Fusion Energy (IFE) power plant where half a million shells need to be processed daily.

  7. Xu, W., et al. (accepted). A cognitive engineering approach for examining pilot-automation interaction in automated flight decks. To appear in Proceedings of the

    E-Print Network [OSTI]

    Kaber, David B.

    Xu, W., et al. (accepted). A cognitive engineering approach for examining pilot- automation interaction in automated flight decks. To appear in Proceedings of the 49th Annual Meeting of the Human To conduct a work domain analysis (WDA) of pilot-automation interaction (PAI) using the abstraction hierarchy

  8. 1070-9932/152015IEEE JUNE 2015 IEEE ROBOTICS & AUTOMATION MAGAZINE 77 he integrating role that is sought by automation in

    E-Print Network [OSTI]

    Reveliotis, Spiridon "Spyros"

    1070-9932/15©2015IEEE JUNE 2015 IEEE ROBOTICS & AUTOMATION MAGAZINE 77 T he integrating role that is sought by automation in many contemporary applications frequently can be abstracted to the need by them. Automation as a Resource-Allocation Function: A Set of Motivating Applications When it comes

  9. Edmund G. Brown Jr. LIGHTING CALIFORNIA'S FUTURE

    E-Print Network [OSTI]

    Edmund G. Brown Jr. Governor LIGHTING CALIFORNIA'S FUTURE: SMART LIGHT-EMITTING DIODE LIGHTING's Future: Smart LightEmitting Diode Lighting in Residential Fans. California Energy Commission, PIER

  10. International Journal of Industrial Ergonomics 36 (2006) 511526 A dynamic model of interaction between reliance on automation and

    E-Print Network [OSTI]

    Lee, John D.

    2006-01-01

    between reliance on automation and cooperation in multi-operator multi-automation situations Ji Gaoa elements of automation. The success of such multi-operator multi-automation systems depends not only on individual operator's appropriate use of automation, but also on cooperation between operators. Inappropriate

  11. ENVIRONMENTAL DESIGN CONSULTANTS + LIGHTING DESIGNERS | atelierten.com Sustainable Design

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    ) with DOA energy recovery with 4-pipe VAV & 2nd chilled water heat exchanger 2. Provide hydronic r · Understanding annual sky cover conditions informs design decisions for shading strategies, glazing types

  12. Chip breaking system for automated machine tool

    DOE Patents [OSTI]

    Arehart, Theodore A. (Clinton, TN); Carey, Donald O. (Oak Ridge, TN)

    1987-01-01

    The invention is a rotary selectively directional valve assembly for use in an automated turret lathe for directing a stream of high pressure liquid machining coolant to the interface of a machine tool and workpiece for breaking up ribbon-shaped chips during the formation thereof so as to inhibit scratching or other marring of the machined surfaces by these ribbon-shaped chips. The valve assembly is provided by a manifold arrangement having a plurality of circumferentially spaced apart ports each coupled to a machine tool. The manifold is rotatable with the turret when the turret is positioned for alignment of a machine tool in a machining relationship with the workpiece. The manifold is connected to a non-rotational header having a single passageway therethrough which conveys the high pressure coolant to only the port in the manifold which is in registry with the tool disposed in a working relationship with the workpiece. To position the machine tools the turret is rotated and one of the tools is placed in a material-removing relationship of the workpiece. The passageway in the header and one of the ports in the manifold arrangement are then automatically aligned to supply the machining coolant to the machine tool workpiece interface for breaking up of the chips as well as cooling the tool and workpiece during the machining operation.

  13. Automated Search for new Quantum Experiments

    E-Print Network [OSTI]

    Mario Krenn; Mehul Malik; Robert Fickler; Radek Lapkiewicz; Anton Zeilinger

    2015-09-09

    Quantum mechanics predicts a number of at first sight counterintuitive phenomena. It is therefore a question whether our intuition is the best way to find new experiments. Here we report the development of the computer algorithm Melvin which is able to find new experimental implementations for the creation and manipulation of complex quantum states. And indeed, the discovered experiments extensively use unfamiliar and asymmetric techniques which are challenging to understand intuitively. The results range from the first implementation of a high-dimensional Greenberger-Horne-Zeilinger (GHZ) state, to a vast variety of experiments for asymmetrically entangled quantum states - a feature that can only exist when both the number of involved parties and dimensions is larger than 2. Additionally, new types of high-dimensional transformations are found that perform cyclic operations. Melvin autonomously learns from solutions for simpler systems, which significantly speeds up the discovery rate of more complex experiments. The ability to automate the design of a quantum experiment can be applied to many quantum systems and allows the physical realization of quantum states previously thought of only on paper.

  14. Automation Enhancement of Multilayer Laue Lenses

    SciTech Connect (OSTI)

    Lauer K. R.; Conley R.

    2010-12-01

    X-ray optics fabrication at Brookhaven National Laboratory has been facilitated by a new, state of the art magnetron sputtering physical deposition system. With its nine magnetron sputtering cathodes and substrate carrier that moves on a linear rail via a UHV brushless linear servo motor, the system is capable of accurately depositing the many thousands of layers necessary for multilayer Laue lenses. I have engineered a versatile and automated control program from scratch for the base system and many subsystems. Its main features include a custom scripting language, a fully customizable graphical user interface, wireless and remote control, and a terminal-based interface. This control system has already been successfully used in the creation of many types of x-ray optics, including several thousand layer multilayer Laue lenses.Before reaching the point at which a deposition can be run, stencil-like masks for the sputtering cathodes must be created to ensure the proper distribution of sputtered atoms. Quality of multilayer Laue lenses can also be difficult to measure, given the size of the thin film layers. I employ my knowledge of software and algorithms to further ease these previously painstaking processes with custom programs. Additionally, I will give an overview of an x-ray optic simulator package I helped develop during the summer of 2010. In the interest of keeping my software free and open, I have worked mostly with the multiplatform Python and the PyQt application framework, utilizing C and C++ where necessary.

  15. Developing Automated Methods of Waste Sorting

    SciTech Connect (OSTI)

    Shurtliff, Rodney Marvin

    2002-08-01

    The U.S. Department of Energy (DOE) analyzed the need complex-wide for remote and automated technologies as they relate to the treatment and disposal of mixed wastes. This analysis revealed that several DOE sites need the capability to open drums containing waste, visually inspect and sort the contents, and finally repackage the containers that are acceptable at a waste disposal facility such as the Waste Isolation Pilot Plant (WIPP) in New Mexico. Conditioning contaminated waste so that it is compatible with the WIPP criteria for storage is an arduous task whether the waste is contact handled (waste having radioactivity levels below 200 mrem/hr) or remote handled. Currently, WIPP non-compliant items are removed from the waste stream manually, at a rate of about one 55-gallon drum per day. Issues relating to contamination-based health hazards as well as repetitive motion health hazards are steering industry towards a more user-friendly, method of conditioning or sorting waste.

  16. Automated Design Space Exploration with Aspen

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Spafford, Kyle L.; Vetter, Jeffrey S.

    2015-01-01

    Architects and applications scientists often use performance models to explore a multidimensional design space of architectural characteristics, algorithm designs, and application parameters. With traditional performance modeling tools, these explorations forced users to first develop a performance model and then repeatedly evaluate and analyze the model manually. These manual investigations proved laborious and error prone. More importantly, the complexity of this traditional process often forced users to simplify their investigations. To address this challenge of design space exploration, we extend our Aspen (Abstract Scalable Performance Engineering Notation) language with three new language constructs: user-defined resources, parameter ranges, and a collection ofmore »costs in the abstract machine model. Then, we use these constructs to enable automated design space exploration via a nonlinear optimization solver. We show how four interesting classes of design space exploration scenarios can be derived from Aspen models and formulated as pure nonlinear programs. The analysis tools are demonstrated using examples based on Aspen models for a three-dimensional Fast Fourier Transform, the CoMD molecular dynamics proxy application, and the DARPA Streaming Sensor Challenge Problem. Our results show that this approach can compose and solve arbitrary performance modeling questions quickly and rigorously when compared to the traditional manual approach.« less

  17. Explosively pumped laser light

    DOE Patents [OSTI]

    Piltch, Martin S. (Los Alamos, NM); Michelotti, Roy A. (Los Alamos, NM)

    1991-01-01

    A single shot laser pumped by detonation of an explosive in a shell casing. The shock wave from detonation of the explosive causes a rare gas to luminesce. The high intensity light from the gas enters a lasing medium, which thereafter outputs a pulse of laser light to disable optical sensors and personnel.

  18. Light intensity compressor

    DOE Patents [OSTI]

    Rushford, Michael C. (Livermore, CA)

    1990-01-01

    In a system for recording images having vastly differing light intensities over the face of the image, a light intensity compressor is provided that utilizes the properties of twisted nematic liquid crystals to compress the image intensity. A photoconductor or photodiode material that is responsive to the wavelength of radiation being recorded is placed adjacent a layer of twisted nematic liquid crystal material. An electric potential applied to a pair of electrodes that are disposed outside of the liquid crystal/photoconductor arrangement to provide an electric field in the vicinity of the liquid crystal material. The electrodes are substantially transparent to the form of radiation being recorded. A pair of crossed polarizers are provided on opposite sides of the liquid crystal. The front polarizer linearly polarizes the light, while the back polarizer cooperates with the front polarizer and the liquid crystal material to compress the intensity of a viewed scene. Light incident upon the intensity compressor activates the photoconductor in proportion to the intensity of the light, thereby varying the field applied to the liquid crystal. The increased field causes the liquid crystal to have less of a twisting effect on the incident linearly polarized light, which will cause an increased percentage of the light to be absorbed by the back polarizer. The intensity of an image may be compressed by forming an image on the light intensity compressor.

  19. VIRTUAL LIGHT: DIGITALLY-GENERATED LIGHTING FOR VIDEO CONFERENCING APPLICATIONS

    E-Print Network [OSTI]

    Greenberg, Albert

    VIRTUAL LIGHT: DIGITALLY-GENERATED LIGHTING FOR VIDEO CONFERENCING APPLICATIONS Andrea Basso method to improve the lighting conditions of a real scene or video sequence. In particular we concentrate on modifying real light sources intensities and inserting virtual lights into a real scene viewed from a fixed

  20. LightBox -Exploring Interaction Modalities with Colored Light

    E-Print Network [OSTI]

    of light to very subtle animations, transitions and dimmed lighting effects. Implementation LightBox is housed in an aluminum suitcase measuring 48x38x25cm. The lid of the suitcase contains a panel of 12x12 Design. Figure 1. An animated lighting sequence visualized on the hi-power LEDs of LightBox #12

  1. Indoor positioning algorithm using light-emitting diode visible light

    E-Print Network [OSTI]

    Kavehrad, Mohsen

    Indoor positioning algorithm using light- emitting diode visible light communications Zhou Zhou of Use: http://spiedl.org/terms #12;Indoor positioning algorithm using light-emitting diode visible light. This paper proposes a novel indoor positioning algorithm using visible light communications (VLC

  2. Automated Cache Performance Analysis And Optimization

    SciTech Connect (OSTI)

    Mohror, Kathryn

    2013-12-23

    While there is no lack of performance counter tools for coarse-grained measurement of cache activity, there is a critical lack of tools for relating data layout to cache behavior to application performance. Generally, any nontrivial optimizations are either not done at all, or are done ”by hand” requiring significant time and expertise. To the best of our knowledge no tool available to users measures the latency of memory reference instructions for partic- ular addresses and makes this information available to users in an easy-to-use and intuitive way. In this project, we worked to enable the Open|SpeedShop performance analysis tool to gather memory reference latency information for specific instructions and memory ad- dresses, and to gather and display this information in an easy-to-use and intuitive way to aid performance analysts in identifying problematic data structures in their codes. This tool was primarily designed for use in the supercomputer domain as well as grid, cluster, cloud-based parallel e-commerce, and engineering systems and middleware. Ultimately, we envision a tool to automate optimization of application cache layout and utilization in the Open|SpeedShop performance analysis tool. To commercialize this soft- ware, we worked to develop core capabilities for gathering enhanced memory usage per- formance data from applications and create and apply novel methods for automatic data structure layout optimizations, tailoring the overall approach to support existing supercom- puter and cluster programming models and constraints. In this Phase I project, we focused on infrastructure necessary to gather performance data and present it in an intuitive way to users. With the advent of enhanced Precise Event-Based Sampling (PEBS) counters on recent Intel processor architectures and equivalent technology on AMD processors, we are now in a position to access memory reference information for particular addresses. Prior to the introduction of PEBS counters, cache behavior could only be measured reliably in the ag- gregate across tens or hundreds of thousands of instructions. With the newest iteration of PEBS technology, cache events can be tied to a tuple of instruction pointer, target address (for both loads and stores), memory hierarchy, and observed latency. With this information we can now begin asking questions regarding the efficiency of not only regions of code, but how these regions interact with particular data structures and how these interactions evolve over time. In the short term, this information will be vital for performance analysts understanding and optimizing the behavior of their codes for the memory hierarchy. In the future, we can begin to ask how data layouts might be changed to improve performance and, for a particular application, what the theoretical optimal performance might be. The overall benefit to be produced by this effort was a commercial quality easy-to- use and scalable performance tool that will allow both beginner and experienced parallel programmers to automatically tune their applications for optimal cache usage. Effective use of such a tool can literally save weeks of performance tuning effort. Easy to use. With the proposed innovations, finding and fixing memory performance issues would be more automated and hide most to all of the performance engineer exper- tise ”under the hood” of the Open|SpeedShop performance tool. One of the biggest public benefits from the proposed innovations is that it makes performance analysis more usable to a larger group of application developers. Intuitive reporting of results. The Open|SpeedShop performance analysis tool has a rich set of intuitive, yet detailed reports for presenting performance results to application developers. Our goal was to leverage this existing technology to present the results from our memory performance addition to Open|SpeedShop. Suitable for experts as well as novices. Application performance is getting more difficult to measure as the hardware platforms they run on become more complicated. This makes life dif

  3. Effect Of False Alarm Rate On Pilot Use And Trust Of Automation Under Conditions Of Simulated High Risk

    E-Print Network [OSTI]

    Cafarelli, Deborah

    2010-11-05

    An experimental study was conducted to investigate the relationships between automation false alarm rate, human trust in automation, and human use of automation, specifically under conditions of simulated high risk. The ...

  4. Market transformation lessons learned from an automated demand response test in the Summer and Fall of 2003

    E-Print Network [OSTI]

    Shockman, Christine; Piette, Mary Ann; ten Hope, Laurie

    2004-01-01

    of Fully Automated Demand Response in Large Facilities”Learned from an Automated Demand Response Test in the SummerLearned from an Automated Demand Response Test in the Summer

  5. Sloan Digital Sky Survey photometric telescope automation and observing software

    SciTech Connect (OSTI)

    Eric H. Neilsen, Jr. et al.

    2002-10-16

    The photometric telescope (PT) provides observations necessary for the photometric calibration of the Sloan Digital Sky Survey (SDSS). Because the attention of the observing staff is occupied by the operation of the 2.5 meter telescope which takes the survey data proper, the PT must reliably take data with little supervision. In this paper we describe the PT's observing program, MOP, which automates most tasks necessary for observing. MOP's automated target selection is closely modeled on the actions a human observer might take, and is built upon a user interface that can be (and has been) used for manual operation. This results in an interface that makes it easy for an observer to track the activities of the automating procedures and intervene with minimum disturbance when necessary. MOP selects targets from the same list of standard star and calibration fields presented to the user, and chooses standard star fields covering ranges of airmass, color, and time necessary to monitor atmospheric extinction and produce a photometric solution. The software determines when additional standard star fields are unnecessary, and selects survey calibration fields according to availability and priority. Other automated features of MOP, such as maintaining the focus and keeping a night log, are also built around still functional manual interfaces, allowing the observer to be as active in observing as desired; MOP's automated features may be used as tools for manual observing, ignored entirely, or allowed to run the telescope with minimal supervision when taking routine data.

  6. Framework for Human-Automation Collaboration: Conclusions from Four Studies

    SciTech Connect (OSTI)

    Johanna Oxstrand; Katya L. Le Blanc; John O'Hara; Jeffrey C. Joe; April M. Whaley; Heather Medema

    2013-11-01

    The Human Automation Collaboration (HAC) research project is investigating how advanced technologies that are planned for Advanced Small Modular Reactors (AdvSMR) will affect the performance and the reliability of the plant from a human factors and human performance perspective. The HAC research effort investigates the consequences of allocating functions between the operators and automated systems. More specifically, the research team is addressing how to best design the collaboration between the operators and the automated systems in a manner that has the greatest positive impact on overall plant performance and reliability. Oxstrand et al. (2013 - March) describes the efforts conducted by the researchers to identify the research needs for HAC. The research team reviewed the literature on HAC, developed a model of HAC, and identified gaps in the existing knowledge of human-automation collaboration. As described in Oxstrand et al. (2013 – June), the team then prioritized the research topics identified based on the specific needs in the context of AdvSMR. The prioritization was based on two sources of input: 1) The preliminary functions and tasks, and 2) The model of HAC. As a result, three analytical studies were planned and conduced; 1) Models of Teamwork, 2) Standardized HAC Performance Measurement Battery, and 3) Initiators and Triggering Conditions for Adaptive Automation. Additionally, one field study was also conducted at Idaho Falls Power.

  7. Open Automated Demand Response Communications Specification (Version 1.0)

    SciTech Connect (OSTI)

    Piette, Mary Ann; Ghatikar, Girish; Kiliccote, Sila; Koch, Ed; Hennage, Dan; Palensky, Peter; McParland, Charles

    2009-02-28

    The development of the Open Automated Demand Response Communications Specification, also known as OpenADR or Open Auto-DR, began in 2002 following the California electricity crisis. The work has been carried out by the Demand Response Research Center (DRRC), which is managed by Lawrence Berkeley National Laboratory. This specification describes an open standards-based communications data model designed to facilitate sending and receiving demand response price and reliability signals from a utility or Independent System Operator to electric customers. OpenADR is one element of the Smart Grid information and communications technologies that are being developed to improve optimization between electric supply and demand. The intention of the open automated demand response communications data model is to provide interoperable signals to building and industrial control systems that are preprogrammed to take action based on a demand response signal, enabling a demand response event to be fully automated, with no manual intervention. The OpenADR specification is a flexible infrastructure to facilitate common information exchange between the utility or Independent System Operator and end-use participants. The concept of an open specification is intended to allow anyone to implement the signaling systems, the automation server or the automation clients.

  8. Automated Proactive Techniques for Commissioning Air-Handling Units

    SciTech Connect (OSTI)

    Katipamula, Srinivas ); Brambley, Michael R. ); Luskay, Larry

    2003-08-30

    Many buildings today use sophisticated building automation systems (BASs) to manage a wide and varied range of building systems. Although the capabilities of the BASs seem to have increased over time, many buildings still are not properly commissioned, operated or maintained. Lack of or improper commissioning, the inability of the building operators to grasp the complex controls, and lack of proper maintenance leads to inefficient operations and reduced lifetimes of the equipment. If regularly scheduled manual maintenance or re-commissioning practices are adopted, they can be expensive and time consuming. Automated proactive commissioning and diagnostic technologies address two of the main barriers to commissioning: cost and schedules. Automated proactive continuous commissioning tools can reduce both the cost and time associated with commissioning, as well as enhance the persistence of commissioning fixes. In the long run, automation even offers the potential for automatically correcting problems by reconfiguring controls or changing control algorithms dynamically. This paper will discuss procedures and processes that can be used to automate and continuously commission the economizer operation and outdoor-air ventilation systems of an air-handling unit.

  9. White light velocity interferometer

    DOE Patents [OSTI]

    Erskine, D.J.

    1999-06-08

    The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

  10. Green Light Pulse Oximeter

    DOE Patents [OSTI]

    Scharf, John Edward (Oldsmar, FL)

    1998-11-03

    A reflectance pulse oximeter that determines oxygen saturation of hemoglobin using two sources of electromagnetic radiation in the green optical region, which provides the maximum reflectance pulsation spectrum. The use of green light allows placement of an oximetry probe at central body sites (e.g., wrist, thigh, abdomen, forehead, scalp, and back). Preferably, the two green light sources alternately emit light at 560 nm and 577 nm, respectively, which gives the biggest difference in hemoglobin extinction coefficients between deoxyhemoglobin, RHb, and oxyhemoglobin, HbO.sub.2.

  11. Lakeview Light and Power- Commercial Lighting Rebate Program

    Broader source: Energy.gov [DOE]

    Lakeview Light and Power offers a commercial lighting rebate program. Rebates apply to the installation of energy efficient lighting retrofits in non-residential buildings. The rebate program is...

  12. Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting

    SciTech Connect (OSTI)

    None

    2009-11-01

    A U.S. Department of Energy Solid-State Lighting Gateway Report on a Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting in Lija Loop, Portland, Oregon.

  13. Columbia Water & Light- HVAC and Lighting Efficiency Rebates

    Broader source: Energy.gov [DOE]

    Columbia Water & Light (CWL) offers rebates to its commercial and industrial customers for the purchase of high efficiency HVAC installations and efficient lighting. Incentives for certain...

  14. Peninsula Light Company- Commercial Efficient Lighting Rebate Program

    Broader source: Energy.gov [DOE]

    Peninsula Light Company (PLC) offers a rebate program for commercial customers who wish to upgrade to energy efficient lighting. Participating customers must be served by PLC commercial service....

  15. Light Vector Mesons

    E-Print Network [OSTI]

    Alexander Milov

    2008-12-21

    This article reviews the current status of experimental results obtained in the measurement of light vector mesons produced in proton-proton and heavy ion collisions at different energies. The review is focused on two phenomena related to the light vector mesons; the modification of the spectral shape in search of Chiral symmetry restoration and suppression of the meson production in heavy ion collisions. The experimental results show that the spectral shape of light vector mesons are modified compared to the parameters measured in vacuum. The nature and the magnitude of the modification depends on the energy density of the media in which they are produced. The suppression patterns of light vector mesons are different from the measurements of other mesons and baryons. The mechanisms responsible for the suppression of the mesons are not yet understood. Systematic comparison of existing experimental results points to the missing data which may help to resolve the problem.

  16. lighting in the library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    lamp produces about 1750 lumens. Footcandle: a lumen of light distributed over a 1-square-foot (0.09-square-meter) area. Ideal Illumination: the minimum number of footcandles...

  17. Solid State Lighting Reliability

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solid State Lighting Reliability 2015Building Technologies Office Peer Review Lynn Davis, PhD RTI International ldavis@rti.org --- 919-316-3325 Project Summary Timeline: Start...

  18. The Facts of Light

    E-Print Network [OSTI]

    Horn, Berthold K.P.

    This is a random collection of facts about radiant and luminous energy. Some of this information may be useful in the design of photo-diode image sensors, in the set-up of lighting for television microscopes and the ...

  19. National Synchrotron Light Source

    ScienceCinema (OSTI)

    None

    2010-01-08

    A tour of Brookhaven's National Synchrotron Light Source (NSLS). The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviole

  20. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    5.2 152.6 160.5 54.6 Assembly Health Care Lodging Office 0 20 40 60 80 100 120 140 160 180 Energy Information Administration Energy Consumption Series: Lighting in Commercial...

  1. Solid state lighting component

    DOE Patents [OSTI]

    Yuan, Thomas; Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald

    2010-10-26

    An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

  2. Solid state lighting component

    DOE Patents [OSTI]

    Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald; Yuan, Thomas

    2012-07-10

    An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

  3. Analyzing the effects of dynamic task allocation on human-automation system performance

    E-Print Network [OSTI]

    Johnson, Aaron William

    2015-01-01

    Modem complex aerospace systems employ flight deck automation to increase the efficiency and safety of systems while reducing operator workload. However, too much automation can lead to overtrust, complacency, and a decrease ...

  4. ETM (Distribution Network Automation on 10 kV cable line stations...

    Open Energy Info (EERE)

    ETM (Distribution Network Automation on 10 kV cable line stations) (Smart Grid Project) Jump to: navigation, search Project Name ETM (Distribution Network Automation on 10 kV cable...

  5. For a Worldwide Leading Industrial Automation Company, we are looking for : Embedded Software Development Engineer

    E-Print Network [OSTI]

    Segatti, Antonio

    For a Worldwide Leading Industrial Automation Company, we are looking for : Embedded Software that will developing complex solutions in the framework of the industrial automation and takes full responsibility

  6. The First International Workshop on Automation of Software Test Department of Computing

    E-Print Network [OSTI]

    Zhu, Hong

    The First International Workshop on Automation of Software Test Hong Zhu Department of Computing, Experimentation, Languages, Management, Measurement. Keywords Software test, Software automation, Test case and environments, Component integration test. 1 MOTIVATION Software testing is indispensable for all software

  7. VoICE: A semi-automated pipeline for standardizing vocal analysis across models

    E-Print Network [OSTI]

    Burkett, ZD; Day, NF; Peñagarikano, O; Geschwind, DH; White, SA

    2015-01-01

    al. VoICE: A semi-automated pipeline for standardizing vocalVoICE: A semi-automated pipeline for standardizing vocalwe designed an analysis pipeline into which any type of

  8. In vivo robotics: the automation of neuroscience and other intact-system biological fields

    E-Print Network [OSTI]

    Forest, Craig R.

    Robotic and automation technologies have played a huge role in in vitro biological science, having proved critical for scientific endeavors such as genome sequencing and high-throughput screening. Robotic and automation ...

  9. Use of Building Automation System Trend Data for Inputs Generation in Bottom-Up Simulation Calibration 

    E-Print Network [OSTI]

    Zibin, N. F.; Zmeureanu, R. G.; Love, J. A.

    2013-01-01

    for analysis and use in simulation is very large. This paper explores automating the process of generating inputs from Building Automation System (BAS) trend data for use in building simulation software. A proof-of-concept prototype called the Automatic...

  10. ,The Impact of Human-Automation Collaboration in Decentralized Multiple Unmanned Vehicle Control

    E-Print Network [OSTI]

    Cummings, M.L.

    2012-01-01

    For future systems that require one or a small team of operators to supervise a network of automated agents, automated planners are critical since they are faster than humans for path planning and resource allocation in ...

  11. Driverless dreams : technological narratives and the shape of the automated car

    E-Print Network [OSTI]

    Stayton, Erik Lee

    2015-01-01

    In this work Erik Stayton examines dominant and alternative paradigms of ground vehicle automation, and concludes that current and imagined automation technology is far more hybrid than is often recognized, presenting ...

  12. Technology maturity analysis for assessing capacity and schedule risk of future automation projects

    E-Print Network [OSTI]

    Frackleton, Conor J

    2014-01-01

    The need to improve risk assessment methods for automation projects within United States manufacturers exists due to a shift toward increased in factory automation stemming from industry pressure to reduce manufacturing ...

  13. Development and Demonstration of the Open Automated Demand Response Standard for the Residential Sector

    E-Print Network [OSTI]

    Herter, Karen

    2014-01-01

    of the Open Automated Demand Response Standard for theOpen Automated Demand Response (OpenADR) Price Schedule Time3.3.2. General Electric Demand Response Module Figure 7. GE’

  14. Automated ground maintenance and health management for autonomous unmanned aerial vehicles

    E-Print Network [OSTI]

    Dale, Daniel R., M. Eng. Massachusetts Institute of Technology

    2007-01-01

    Automated ground maintenance is a necessity for multi-UAV systems. Without such automation, these systems will become more of a burden than a benefit as human operators struggle to contend with maintenance operations for ...

  15. Design of an automated sorting and orienting machine for electronic pins

    E-Print Network [OSTI]

    Chang, Michelle Sueway

    2012-01-01

    At the power electronics manufacturer SynQor, the printed circuit board (PCB) assembly line is fully automated with the exception of the step which inserts electronic pins into the PCBs. Past attempts to automate this ...

  16. Measuring journey time reliability in London using automated data collection systems

    E-Print Network [OSTI]

    Schil, Mickaël (Mickaël René Jerôme)

    2012-01-01

    Service reliability is critical for both users and operators of transit systems. The rapid spread of Automated Data Collection Systems, such as Automated Fare Collection (AFC) and Automatic Vehicle Location (AVL), provides ...

  17. Light and Plants Plants use light to photosynthesize. Name two places that light can come from

    E-Print Network [OSTI]

    Koptur, Suzanne

    Light and Plants Plants use light to photosynthesize. Name two places that light can come from: 1 (CO2, a gas) from the air and turn it into SUGARS (food). This process is powered by energy from light plants) for energy. Photosynthetically Active Radiation (PAR) is a combination of red light and blue

  18. LED Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    focusing light in ways that are useful in homes and commercial settings. The light-emitting diode (LED) is one of today's most energy-efficient and rapidly-developing lighting...

  19. Energy Conservation in Industrial Lighting 

    E-Print Network [OSTI]

    Meharg, E.

    1979-01-01

    were identified. Savings in power and cost were quantified for typical examples as follows: Task lighting, high light source efficacy, high luminaire mounting height, efficient luminaires, surroundings painted a light color, regular luminaire cleaning...

  20. Higher order light propagation volumes

    E-Print Network [OSTI]

    Martin, Timothy Ly; Martin, Timothy Ly

    2012-01-01

    1.1 Introduction . . . . . . . . . 1.2 Light Propagation4.1.1 Injection of Virtual Point Lights and Geometryof the Stanford bunny, lit by an area light, rendered using