Sample records for light bulb turned

  1. Solar light bulb

    SciTech Connect (OSTI)

    Smith, D.A.

    1983-07-26T23:59:59.000Z

    A system for generating light directly using solar energy is provided herein. It includes a concentrator and accumulator for the sun's rays to generate a concentrated beam of visible solar radiation. A distributor shaft is provided for distributing the beam of visible solar radiation. A fork is provided in the distributor shaft to define a plurality of branch lines, each provided with a mirror at the intersection to direct the beam down the respective branch line to permit parallel fractions of the beam to be reflected off the respective mirrors and to pass down the respective branch line. A solar bulb is provided including a double walled upper bulbous portion including the inlet from the branch line and a pair of heat outlet tubes, and a double walled lower bulbous portion, the upper portion thereof being divergently reflective, with the lower portion having walls which are either transparent or translucent to provide greater light diffusion, and the space between the two walls being maintained under vacuum to provide heat insulation values. A structure is provided within the solar bulb for the absorption and radiation of the concentrated beam of visible solar radiation. Preferably structure is provided connected to the solar bulb to draw in outside air in the summer to direct it past the solar bulb and to air vent hot air produced at the solar bulb to the outside, thereby providing light with minimal heat in the summer. The same structure is operated in the winter to draw in household air to direct it past the solar bulb and to recirculate such heated air produced at the solar bulb to the house, thereby providing light and heat in the winter.

  2. Waste Toolkit A-Z Light bulbs

    E-Print Network [OSTI]

    Melham, Tom

    Waste Toolkit A-Z Light bulbs Can I recycle light bulbs? It depends what type of bulbs you have of in the normal University waste bins (landfill waste). Energy saving bulbs and fluorescent tubes are classified light bulbs? Standard filament bulbs Put in the waste bin (landfill waste) as these are not classified

  3. Comparing Light Bulbs

    Broader source: Energy.gov [DOE]

    In this exercise, students will use a light to demonstrate the difference between being energy-efficient and energy-wasteful, and learn what energy efficiency means.

  4. Wiring Switches to Light Bulbs

    E-Print Network [OSTI]

    Buckley, Stephen M

    2011-01-01T23:59:59.000Z

    Given n buttons and n bulbs so that the ith button toggles the ith bulb and at most two other bulbs, we compute the sharp lower bound on the number of bulbs that can be lit regardless of the action of the buttons.

  5. Consumer Light Bulb Changes: Briefing and Resources for Media...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Consumer Light Bulb Changes: Briefing and Resources for Media and Retailers Consumer Light Bulb Changes: Briefing and Resources for Media and Retailers This presentation provides...

  6. 100 Prisoners and A light Bulb Yisong Song

    E-Print Network [OSTI]

    Morrow, James A.

    100 Prisoners and A light Bulb Yisong Song 1. Introduction The article represent three different protocols for solving the "100 Prisoners and a Light Bulb" riddle, including the explicit computations only a light bulb with a toggle switch. The prisoner will be able to observe the current state

  7. Consumer Light Bulb Changes: Briefing and Resources for Media...

    Broader source: Energy.gov (indexed) [DOE]

    flux") - CFL: Compact Fluorescent Lamp: The curly fluorescent bulbs - LED: Light Emitting Diode: more recently emerging technology, also called "solid state lighting" as it is...

  8. How Energy-Efficient Light Bulbs Compare with Traditional Incandescent...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    used light fixtures or bulbs with models that have earned the ENERGY STAR, you can save 75 each year. Compared to traditional incandescents, energy-efficient lightbulbs...

  9. Full Spectrum Light Therapy Full spectrum light bulbs are said to not only improve mood, but also

    E-Print Network [OSTI]

    Bates, Rebecca A.

    Full Spectrum Light Therapy Full spectrum light bulbs are said to not only improve mood, but also spectrum light bulbs produce light that is seen by the human eye in a bluish-white tint. Where is full

  10. Free Energy Efficiency Kit includes CFL light bulbs,

    E-Print Network [OSTI]

    Rose, Annkatrin

    Free Energy Efficiency Kit Kit includes CFL light bulbs, spray foam, low-flow shower head, and more for discounted energy assessments. FREE HOME ENERGY EFFICIENCY SEMINAR N e w R i ver L i g ht & Pow e r a n d W! Building Science 101 Presentation BPI Certified Building Professionals will present home energy efficiency

  11. Text-Alternative Version: L Prize™: The Race for Super Efficient Light Bulbs

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the L Prize™: The Race for Super Efficient Light Bulbs webcast.

  12. THE LIGHT BULB PROBLEM 1 Ramamohan Paturi2 Sanguthevar Rajasekaran3 John Reif3

    E-Print Network [OSTI]

    Rajasekaran, Sanguthevar

    THE LIGHT BULB PROBLEM 1 Ramamohan Paturi2 Sanguthevar Rajasekaran3 John Reif3 Univ. of California Title: The Light Bulb Problem Corresponding Author: Ramamohan Paturi Department of Computer Science Mail correlational learning problem due to L. G. Valiant, 1985 and 1988: We have a sequence of n random light bulbs

  13. THE LIGHT BULB PROBLEM 1 Ramamohan Paturi2 Sanguthevar Rajasekaran3 John Reif3

    E-Print Network [OSTI]

    Rajasekaran, Sanguthevar

    THE LIGHT BULB PROBLEM 1 Ramamohan Paturi2 Sanguthevar Rajasekaran3 John Reif3 Univ. of California, San Diego Univ. of Pennsylvania Duke University 1 #12;Running Title: The Light Bulb Problem, 1985 and 1988: We have a sequence of n random light bulbs each of which is either on or off with equal

  14. Frequently Asked Questions Information on Compact Fluorescent Light Bulbs (CFLs) and Mercury

    E-Print Network [OSTI]

    Jia, Songtao

    Frequently Asked Questions Information on Compact Fluorescent Light Bulbs (CFLs) and Mercury February 2008 Why should people use CFLs? Switching from traditional light bulbs to CFLs is an effective light bulbs, last up to 10 times longer, cost little up front, and provide a quick return on investment

  15. Labeling energy cost on light bulbs lowers implicit discount rates Jihoon Min a

    E-Print Network [OSTI]

    Michalek, Jeremy J.

    Analysis Labeling energy cost on light bulbs lowers implicit discount rates Jihoon Min a , Inês L considerably. To quantify the influence of factors that drive consumer choices for light bulbs, we conducted incandescent bulbs. About half of the total lighting service (in terms of lumens) was provided by incandes

  16. THE LIGHT BULB PROBLEM 1 Ramamohan Paturi 2 Sanguthevar Rajasekaran 3 John Reif 3

    E-Print Network [OSTI]

    Reif, John H.

    THE LIGHT BULB PROBLEM 1 Ramamohan Paturi 2 Sanguthevar Rajasekaran 3 John Reif 3 Univ. of California, San Diego Univ. of Pennsylvania Duke University 1 #12; Running Title: The Light Bulb Problem, 1985 and 1988: We have a sequence of n random light bulbs each of which is either on or o# with equal

  17. DOE Requires Westinghouse to Cease Sales of Two Light Bulb Models...

    Broader source: Energy.gov (indexed) [DOE]

    against Westinghouse Lighting Corporation, the company must cease sales of two light bulb models - medium based CFL basic model 15GLOBE652 (Westinghouse product code 3800400)...

  18. Chapter 30: Quantum Physics 9. The tungsten filament in a standard light bulb can be considered a blackbody radiator.

    E-Print Network [OSTI]

    Kioussis, Nicholas

    . 1 Chapter 30: Quantum Physics 9. The tungsten filament in a standard light bulb can be considered frequency is that of infrared electromagnetic radiation, the light bulb radiates more energy in the infrared

  19. 600 New Lights Bulbs to Improve Energy Efficiency at DOE | Department...

    Broader source: Energy.gov (indexed) [DOE]

    our Washington, D.C., Forrestal North Building canopy with state of the art Light Emitting Diode (LED) fixtures. Every new bulb now uses just 23 watts instead of 205 watts....

  20. Westinghouse Pays $50,000 Civil Penalty to Resolve Light Bulb...

    Broader source: Energy.gov (indexed) [DOE]

    here. Addthis Related Articles DOE Requires Westinghouse to Cease Sales of Two Light Bulb Models and Allows Sale of Another Air-Con Agrees to Pay Civil Penalty to Resolve...

  1. Exam Stochastic Processes 2WB08 January 29, 2007 A light bulb burns for an amount of time having distribution F(), with Laplace trans-

    E-Print Network [OSTI]

    Giardinà, Cristian

    Exam Stochastic Processes 2WB08 ­ January 29, 2007 Problem 1: A light bulb burns for an amount moment µ2. When the light bulb burns out, it is immediately replaced by another light bulb which has the same life time distribution F(·), etc. Let m(t) be the mean number of replacements of light bulbs upto

  2. The Hazards of Use and Disposal of Compact Fluorescent Bulbs Compact fluorescent lights (aka. CFLs) work by exciting a phosphorous coating within the tube to emit

    E-Print Network [OSTI]

    Maroncelli, Mark

    The Hazards of Use and Disposal of Compact Fluorescent Bulbs Compact fluorescent lights (aka. CFLs the bulb to be an efficient light source. By comparison, older home thermometers contain 500 milligrams decade. HOW SHOULD I DISPOSE OF CFL'S? The presence of mercury requires that all CFL bulbs are properly

  3. L Prize™: The Race for Super Efficient Light Bulbs

    Broader source: Energy.gov [DOE]

    This September 23, 2008 webcast provided an overview of the Bright Tomorrow Lighting Prize (L Prize) technology competition. The L Prize calls for super-efficient SSL products to replace two of the...

  4. Bulb mounting of solar cell

    SciTech Connect (OSTI)

    Thompson, M.E.

    1983-04-05T23:59:59.000Z

    An energy converting assembly is provided for parasiting of light from a fluorescent light bulb utilizing a solar cell. The solar cell is mounted on a base member elongated in the dimension of elongation of the fluorescent bulb, and electrical interconnections to the cell are provided. A flexible sheet of opaque material having a flat white interior reflective surface surrounds the fluorescent bulb and reflects light emitted from the bulb back toward the bulb and the solar cell. The reflective sheet is tightly held in contact with the bottom of the bulb by adhesive, a tie strap, an external clip, or the like.

  5. Mercury Lamps Recycling Fluorescent light-tubes, compact fluorescent bulbs, mercury and sodium vapor lamps, ultraviolet and

    E-Print Network [OSTI]

    Baker, Chris I.

    Mercury Lamps Recycling Fluorescent light-tubes, compact fluorescent bulbs, mercury and sodium labeled for shipment to a recycling plant for mercury, glass and aluminum recovery. The beneficial re can be recycled infinitely without losing its purity or strength. While the primary end product

  6. Quasars Are Not Light-Bulbs: Testing Models of Quasar Lifetimes with the Observed Eddington Ratio Distribution

    E-Print Network [OSTI]

    Hopkins, Philip F

    2008-01-01T23:59:59.000Z

    We use the observed distribution of Eddington ratios as a function of supermassive black hole (BH) mass to constrain models of AGN lifetimes and lightcurves. Given the observed AGN luminosity function, a model for AGN lifetimes (time above a given luminosity) translates directly to a predicted Eddington ratio distribution. Models for self-regulated BH growth, in which feedback produces a 'blowout' decay phase after some peak luminosity (shutting down accretion) make specific predictions for the lifetimes distinct from those expected if AGN are simply gas starved (without feedback) and very different from simple phenomenological 'light bulb' models. Present observations of the Eddington ratio distribution, spanning 5 decades in Eddington ratio, 3 in BH mass, and redshifts z=0-1, agree with the predictions of self-regulated models, and rule out 'light-bulb', pure exponential, and gas starvation models at high significance. We compare the Eddington ratio distributions at fixed BH mass and fixed luminosity (both ...

  7. Quasars Are Not Light-Bulbs: Testing Models of Quasar Lifetimes with the Observed Eddington Ratio Distribution

    E-Print Network [OSTI]

    Philip F. Hopkins; Lars Hernquist

    2009-04-30T23:59:59.000Z

    We use the observed distribution of Eddington ratios as a function of supermassive black hole (BH) mass to constrain models of AGN lifetimes and lightcurves. Given the observed AGN luminosity function, a model for AGN lifetimes (time above a given luminosity) translates directly to a predicted Eddington ratio distribution. Models for self-regulated BH growth, in which feedback produces a 'blowout' decay phase after some peak luminosity (shutting down accretion) make specific predictions for the lifetimes distinct from those expected if AGN are simply gas starved (without feedback) and very different from simple phenomenological 'light bulb' models. Present observations of the Eddington ratio distribution, spanning 5 decades in Eddington ratio, 3 in BH mass, and redshifts z=0-1, agree with the predictions of self-regulated models, and rule out 'light-bulb', pure exponential, and gas starvation models at high significance. We compare the Eddington ratio distributions at fixed BH mass and fixed luminosity (both are consistent, but the latter are much less constraining). We present empirical fits to the lifetime distribution and show how the Eddington ratio distributions place tight limits on AGN lifetimes at various luminosities. We use this to constrain the shape of the typical AGN lightcurve, and provide simple analytic fits. Given independent constraints on episodic lifetimes, most local BHs must have gained their mass in no more than a couple of bright episodes, in agreement with merger-driven fueling models.

  8. GREEN LIVING Replace incandencent and halogen light bulbs with LED and CLFs

    E-Print Network [OSTI]

    Thaxton, Christopher S.

    GREEN LIVING GUIDE ENERGY TRAVEL FOOD sustain yosef WATER Replace incandencent and halogen light for your laundry RESIST THAT SWITCH! Use natural light during the day, and no lights when you are gone USE MORE THAN YOU CAN EAT, reduce your waste stream DRINK FAIR TRADE COFFEE - Check out Conrad

  9. Tired of changing light bulbs AND want to save money? Still using 100 year-old technology?

    E-Print Network [OSTI]

    Glashausser, Charles

    ?) ·Fine print: You will also reduce Global Warming pollution. Over its lifetime, a "100W" Compact will prevent global warming pollution equal to 100 to 150 gallons of gasoline AND reduce poisons like mercury bulb but lasts THIRTEEN times longer! The Compact bulb will save you $90 just in electricity cost over

  10. When to Turn Off Your Lights | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you sureReportsofDepartmentSeries |Attacksof EnergyWhen to Turn Off Your

  11. Lamp bulb with integral reflector

    DOE Patents [OSTI]

    Levin, Izrail (Silver Spring, MD); Shanks, Bruce (Gaithersburg, MD); Sumner, Thomas L. (Wheaton, MD)

    2001-01-01T23:59:59.000Z

    An improved electrodeless discharge lamp bulb includes an integral ceramic reflector as a portion of the bulb envelope. The bulb envelope further includes two pieces, a reflector portion or segment is cast quartz ceramic and a light transmissive portion is a clear fused silica. In one embodiment, the cast quartz ceramic segment includes heat sink fins or stubs providing an increased outside surface area to dissipate internal heat. In another embodiment, the quartz ceramic segment includes an outside surface fused to eliminate gas permeation by polishing.

  12. Reducing home lighting expenses

    SciTech Connect (OSTI)

    Aimone, M.A.

    1981-02-01T23:59:59.000Z

    Ways to reduce lighting expenses are summarized. These include: turning off lights when not in use; keeping fixtures and lamps clean; replacing lamps with more efficient types; using three-way bulbs; use of daylighting; buying fewer lamps and reducing lamp wattage; consider repainting rooms; replacing recessed fixtures with tracklighting; and using efficient lamps for outdoor use. (MCW)

  13. Jacketed lamp bulb envelope

    DOE Patents [OSTI]

    MacLennan, Donald A. (Gaithersburg, MD); Turner, Brian P. (Damascus, MD); Gitsevich, Aleksandr (Gaithersburg, MD); Bass, Gary K. (Mt. Airy, MD); Dolan, James T. (Frederick, MD); Kipling, Kent (Gaithersburg, MD); Kirkpatrick, Douglas A. (Great Falls, VA); Leng, Yongzhang (Damascus, MD); Levin, Izrail (Silver Spring, MD); Roy, Robert J. (Frederick, MD); Shanks, Bruce (Gaithersburg, MD); Smith, Malcolm (Alexandria, VA); Trimble, William C. (Columbia, MD); Tsai, Peter (Olney, MD)

    2001-01-01T23:59:59.000Z

    A jacketed lamp bulb envelope includes a ceramic cup having an open end and a partially closed end, the partially closed end defining an aperture, a lamp bulb positioned inside the ceramic cup abutting the aperture, and a reflective ceramic material at least partially covering a portion of the bulb not abutting the aperture. The reflective ceramic material may substantially fill an interior volume of the ceramic cup not occupied by the bulb. The ceramic cup may include a structural feature for aiding in alignment of the jacketed lamp bulb envelope in a lamp. The ceramic cup may include an external flange about a periphery thereof. One example of a jacketed lamp bulb envelope includes a ceramic cup having an open end and a closed end, a ceramic washer covering the open end of the ceramic cup, the washer defining an aperture therethrough, a lamp bulb positioned inside the ceramic cup abutting the aperture, and a reflective ceramic material filling an interior volume of the ceramic cup not occupied by the bulb. A method of packing a jacketed lamp bulb envelope of the type comprising a ceramic cup with a lamp bulb disposed therein includes the steps of filling the ceramic cup with a flowable slurry of reflective material, and applying centrifugal force to the cup to pack the reflective material therein.

  14. How to upgrade your incandescent light bulbs Many people are choosing replacements for their standard incandescent light bulbs to save money or energy, because they've heard of new LED

    E-Print Network [OSTI]

    Bystroff, Chris

    or building a new home, work wi efficient light fixture, · use occupancy or vacancy sensors, or · if you are renovating your home

  15. Energy-Saving Tips 1. Turn the radiator off when you are out.

    E-Print Network [OSTI]

    Brierley, Andrew

    the windows. 4. Turn the heating down. As well as wasting energy, having your room too hot is bad for you your mobile phone charger at the wall when you are not using it. 16. Use energy efficient light bulbs the thermostat instead of reaching for a jumper 15% wash clothes at 90C Brits waste more energy than

  16. How Many CASTLE Bulbs Would You Need To Match the Brightness of the Sun?

    E-Print Network [OSTI]

    Collar, Juan I.

    How Many CASTLE Bulbs Would You Need To Match the Brightness of the Sun? = × ? Please do all million miles), so if we were to try to build the Sun out of light bulbs, we'd need a bunch! But, how many objects: the Sun, and a CASTLE light bulb. What do we mean by "brightness?" The electromagnetic (EM

  17. Estimated Savings from Turning Off Unnecessary Lights at the Langford Architecture Center During the 1996 Christmas Holidays

    E-Print Network [OSTI]

    Soebarto, V. I.; Haberl, J. S.; Degelman, L. O.

    1997-01-01T23:59:59.000Z

    lights been left on, the building would have consumed 100 kW more electricity every hour. The total electricity savings was about 31,200 kWh over 13 days, which is equivalent to a total cost saving of $936.00. If the College continues to turn off...

  18. Ordered progression of nematogenesis from stem cells through differentiation stages in the tentacle bulb of Clytia hemisphaerica (Hydrozoa, Cnidaria)

    E-Print Network [OSTI]

    Gibson, Matt

    bulb of Clytia hemisphaerica (Hydrozoa, Cnidaria) Elsa Denker, Michaël Manuel, Lucas Leclère, Hervé Le of the tentacle bulb, a specialized swelling at the tentacle base. Analysis by a variety of light and electron-temporal characteristics are markedly more ordered. The tentacle bulb nematogenic ectoderm (TBE) was found to be polarized

  19. Dendritic processing within olfactory bulb circuits

    E-Print Network [OSTI]

    Betz, William J.

    Dendritic processing within olfactory bulb circuits Nathan E. Schoppa1 and Nathan N. Urban2 1 of the olfactory bulb. How- ever, the mechanisms by which this map is transformed into an odor code by the bulb circuitry remain unclear. Recent physiological studies in bulb slices have ident- ified several synaptic

  20. Stochastic modeling of hourly dry-bulb and wet-bulb temperatures

    SciTech Connect (OSTI)

    Kline, D.E.; Woeste, F.E.

    1984-01-01T23:59:59.000Z

    A stochastic model of hourly dry-bulb and wet-bulb temperatures was developed. The periodic variations over the course of a year were estimated by least-square approximation. A multisite Markov model was used to simulate the stochastic nature of the data. These two models were combined to simulate years of hourly dry-bulb and wet-bulb temperatures.

  1. Fooling Mother Nature: Forcing Flower Bulbs

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    Fooling Mother Nature: Forcing Flower Bulbs for Indoor Bloom by George Graine,Virginia Cooperative Bulbs for Indoor Bloom George Graine,Virginia Cooperative Extension Master Gardener, Fairfax County, VA Introduction Have you ever wondered if it is possible to enjoy the beauty of bulbs in the middle of winter

  2. (bulb) , (1) Gas(1) Gas(1) Gas(1) Gas----saturation methodsaturation methodsaturation methodsaturation method

    E-Print Network [OSTI]

    Hong, Deog Ki

    (bulb) , . . , . . 1. . (1) Gas(1Static MethodStatic Method Isoteniscope bulb U-tube . bulb U-tube bulb . bulb . U bulb . manometer . . Isoteniscope Boling Point Method . #12;2. (1) Boiling

  3. Lighting a building with a single bulb : toward a system for illumination in the 21st c.; or, A centralized illumination system for the efficient decoupling and recovery of lighting related heat

    E-Print Network [OSTI]

    Levens, Kurt Antony, 1961-

    1997-01-01T23:59:59.000Z

    Piping light represents the first tenable method for recovery and reutilization of lighting related heat. It can do this by preserving the energy generated at the lamp as radiative, departing from precedent and avoiding ...

  4. Ceramic Mugs & Dishes Incandescent Light Bulbs

    E-Print Network [OSTI]

    Yamamoto, Keith

    , MU East Rock Hall/19-B CELL PHONES - EYEGLASSES 654 Minnesota Street Room 208, copy room CVRI Helen. Zion Cancer Research Building N423 Parnassus Campus: eyeglasses "I" level, Optometry Store, MU West

  5. Type of Space Bulb Type #/House Fixture Style Greenhouse #

    E-Print Network [OSTI]

    Pawlowski, Wojtek

    Type of Space Bulb Type #/House Fixture Style Greenhouse # 1 Lu 430/Lu 400 24 White box style 2 Lu No bulbs 0 N/A Seed harvest room F32 T8/TL 841 90 bulbs VIGS Room F032 /741/ECO 60 bulbs Chamber Model Bulb

  6. Department of Energy Announces Philips Lighting North America...

    Energy Savers [EERE]

    Product Delivers on Department's Challenge to Replace Common Light Bulb with Energy-Saving Lighting Alternative Washington, D.C. - The U.S. Department of Energy today...

  7. The New York City Bulb Garden [Transforming the American Garden: 12 New Landscape Designs-Exhibitor

    E-Print Network [OSTI]

    Schwartz, Martha

    1986-01-01T23:59:59.000Z

    point of intersection. The bulbs selected for this schemefall and late fall. The bulbs have been selected for theiris designed for flexibility. Bulbs can be replaced and new

  8. Spatial assessment of net mercury emissions from the use of fluorescent bulbs

    SciTech Connect (OSTI)

    Matthew J. Eckelman; Paul T. Anastas; Julie B. Zimmerman [Yale University, New Haven, CT (United States). Department of Chemical Engineering

    2008-11-15T23:59:59.000Z

    While fluorescent lighting is an important technology for reducing electrical energy demand, mercury used in the bulbs is an ongoing concern. Using state and country level data, net emissions of mercury from the marginal use of fluorescent lightbulbs are examined for a base year of 2004 for each of the 50 United States and 130 countries. Combustion of coal for electric power generation is generally the largest source of atmospheric mercury pollution; reduction in electricity demand from the substitution of incandescent bulbs with fluorescents leads to reduced mercury emissions during the use of the bulb. This analysis considers the local mix of power sources, coal quality, thermal conversion efficiencies, distribution losses, and any mercury control technologies that might be in place. Emissions of mercury from production and end-of-life treatment of the bulbs are also considered, providing a life-cycle perspective. Net reductions in mercury over the entire life cycle range from -1.2 to 97 mg per bulb depending on the country. The consequences for atmospheric mercury emissions of several policy scenarios are also discussed. 46 refs., 4 figs., 3 tabs.

  9. The Somatotopic Organization of the Olfactory Bulb in Elasmobranchs

    E-Print Network [OSTI]

    Kajiura, Stephen

    The Somatotopic Organization of the Olfactory Bulb in Elasmobranchs Tricia L. Meredith,1, University of Colorado Denver, Anschutz Medical Campus, Aurora, Colorado 80045 ABSTRACT The olfactory bulbs-olfac- tory bulbs.'' Somatotopy could provide a preadaptation which facilitated the evolution of olfactory

  10. Cellular/Molecular Detecting Activity in Olfactory Bulb Glomeruli with

    E-Print Network [OSTI]

    Newman, Eric A.

    Cellular/Molecular Detecting Activity in Olfactory Bulb Glomeruli with Astrocyte Recording Didier, Oregon 97239 In the olfactory bulb, axons of olfactory sensory neurons (OSNs) expressing the same to examine functional compartmentalization within and between olfactory bulb glomeruli. Key words: olfactory

  11. BULB: Onion-Based Measuring of OSS Communities

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    BULB: Onion-Based Measuring of OSS Communities Terhi Kilamo1 , Timo Aaltonen1 , and Teemu J. Heinim based on scarce information. In this paper a measuring model for open source commu- nities, BULB, is introduced. BULB provides a way of collecting relevant information and relates it to the well-known onion

  12. Encoding Pheromonal Signals in the Accessory Olfactory Bulb of

    E-Print Network [OSTI]

    Fee, Michale S.

    Encoding Pheromonal Signals in the Accessory Olfactory Bulb of Behaving Mice Minmin Luo,1 * Michale single neurons in the accessory olfactory bulb, a nucleusthatprocessespheromonalsignals with sources of pheromones (4, 5). Olfactory receptor neurons project to the main olfactory bulb (MOB), whose

  13. Microwave generated plasma light source apparatus

    SciTech Connect (OSTI)

    Yoshizawa, K.; Ito, H.; Kodama, H.; Komura, H.; Minowa, Y.

    1985-02-05T23:59:59.000Z

    A microwave generated plasma light source including a microwave generator, a microwave cavity having a light reflecting member forming at least a portion of the cavity, and a member transparent to light and opaque to microwaves disposed across an opening of the cavity opposite the feeding opening through which the microwave generator is coupled. An electrodeless discharge bulb is disposed at a position in the cavity such that the cavity operates as a resonant cavity at least when the bulb is emitting light. In the bulb is encapsulated at least one discharge light emissive substance. The bulb has a shape and is sufficiently small that the bulb acts substantially as a point light source.

  14. TOMORROW: Department of Energy to Announce Philips Lighting North...

    Office of Environmental Management (EM)

    American consumers and businesses money. Philips developed a highly efficient light emitting diode (LED) bulb to meet rigorous requirements of the L Prize competition - ensuring...

  15. Chemical Dependencies of Learning in the Rabbit Olfactory Bulb: Acquisition of the Transient Spatial Pattern Chance Depends on Norepinephrine

    E-Print Network [OSTI]

    Gray, Charles M; Freeman, Walter J III; Skinner, James E

    1986-01-01T23:59:59.000Z

    of neurons in the olfactory bulb following prolonged odorforcbrain (3): Olfactory bulb. anterior olfactory nucleus.39;thc rat olfactory bulb (2): Fluorescnce histochemical.

  16. Jacob P. Brenner Design Specifications for Wet-Bulb Aspirator Apparatus

    E-Print Network [OSTI]

    Wisconsin at Madison, University of

    Jacob P. Brenner Thesis: Design Specifications for Wet-Bulb Aspirator Apparatus Project Description the concentration of water vapor in the air is the wet-bulb temperature. The wet-bulb temperature along with the dry-bulb for the testing of HVAC&R equipment. The focus of this research is on the accurate measurement of the wet-bulb

  17. Energy 101: Lighting Choices | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in your home to energy-saving incandescent, compact fluorescent lamp (CFL), or light emitting diode (LED) bulbs could save you about 50 per year. For more information on lighting...

  18. SuperBulbs Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with formSoutheastern ILSunseeker Energy Holding AG JumpSunways AGSuperBulbs Inc

  19. Physiological properties and factors affecting migration of neural precursor cells in the adult olfactory bulb

    E-Print Network [OSTI]

    Darcy, Daniel Paul

    2007-01-01T23:59:59.000Z

    neurons in the olfactory bulb." J Neurosci 26(41): 10508-in the olfactory bulb." The Journal of comparative neurologycells to the olfactory bulb." J Neurosci 21(21): 8505-13.

  20. Modeling the wet bulb globe temperature using standard meteorological measurements.

    SciTech Connect (OSTI)

    Liljegren, J. C.; Carhart, R. A.; Lawday, P.; Tschopp, S.; Sharp, R.; Decision and Information Sciences

    2008-10-01T23:59:59.000Z

    The U.S. Army has a need for continuous, accurate estimates of the wet bulb globe temperature to protect soldiers and civilian workers from heat-related injuries, including those involved in the storage and destruction of aging chemical munitions at depots across the United States. At these depots, workers must don protective clothing that increases their risk of heat-related injury. Because of the difficulty in making continuous, accurate measurements of wet bulb globe temperature outdoors, the authors have developed a model of the wet bulb globe temperature that relies only on standard meteorological data available at each storage depot for input. The model is composed of separate submodels of the natural wet bulb and globe temperatures that are based on fundamental principles of heat and mass transfer, has no site-dependent parameters, and achieves an accuracy of better than 1 C based on comparisons with wet bulb globe temperature measurements at all depots.

  1. LED lamp or bulb with remote phosphor and diffuser configuration with enhanced scattering properties

    DOE Patents [OSTI]

    Tong, Tao; Le Toquin, Ronan; Keller, Bernd; Tarsa, Eric; Youmans, Mark; Lowes, Theodore; Medendorp, Jr., Nicholas W; Van De Ven, Antony; Negley, Gerald

    2014-11-11T23:59:59.000Z

    An LED lamp or bulb is disclosed that comprises a light source, a heat sink structure and an optical cavity. The optical cavity comprises a phosphor carrier having a conversions material and arranged over an opening to the cavity. The phosphor carrier comprises a thermally conductive transparent material and is thermally coupled to the heat sink structure. An LED based light source is mounted in the optical cavity remote to the phosphor carrier with light from the light source passing through the phosphor carrier. A diffuser dome is included that is mounted over the optical cavity, with light from the optical cavity passing through the diffuser dome. The properties of the diffuser, such as geometry, scattering properties of the scattering layer, surface roughness or smoothness, and spatial distribution of the scattering layer properties may be used to control various lamp properties such as color uniformity and light intensity distribution as a function of viewing angle.

  2. Directions to Gebbie Speech-Language Hearing Clinic From the Main SU Campus: Go south on Comstock Ave (toward Manley Field House). Turn left onto Colvin St. Turn right

    E-Print Network [OSTI]

    Mather, Patrick T.

    . Turn right at the next light onto Brighton Avenue. Go to Route 11 and turn right onto Salina St. Go

  3. biosemiotics turning wild

    E-Print Network [OSTI]

    Markos, Anton

    biosemiotics turning wild essays in honour of kalevi kull on the occasion of his 60th birthday #12;Biosemiotics Turning Wild. Essays in Honour of Kalevi Kull on the Occasion of His 60th Birthday. Edited by Timo

  4. A new maintenance friendly concept for bulb type generators

    SciTech Connect (OSTI)

    Scheidl, W.

    1998-07-01T23:59:59.000Z

    Bulb type generators in the rating range up to 15 MW are in a severe competition with geared up machines which operate at much higher speed and are therefore smaller and cheaper. Up to now the conventional bulb type generator in the standard design as it is used on several rivers in Austria and many other countries was not so economic in the lower rating range. A new and maintenance friendly concept for the bulb type generator design especially for these lower rating range ended in a more economic solution and is now able to compete with the geared up machines.

  5. Right Turn on Red! | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    benefits for the country, helping us all save money by saving energy. Prior to the 1970's, some states already allowed drivers to turn right on a red light, but many others -...

  6. Why Did the LED Light Bulb Cross the Road?

    Office of Energy Efficiency and Renewable Energy (EERE)

    Could using humor as a marketing strategy make energy efficiency a bit more digestible? One Illinois grant recipient thinks it could be.

  7. A Second UV "Light Bulb" behind the SN 1006 Remnant

    E-Print Network [OSTI]

    Winkler, P F; Long, Knox S.

    1997-01-01T23:59:59.000Z

    A point X-ray source located 9 arcmin northeast of the center of SN~1006 has been spectroscopically identified as a background QSO, with a redshift of 0.335. The object is moderately bright, with magnitude V=18.3. If its ultraviolet spectrum is typical of low-z quasars, this object will be a second (after the Schweizer-Middleditch star) source to use for absorption spectroscopy of material within SN 1006. Absorption spectra provide a unique probe for unshocked ejecta within this supernova remnant, and can possibly solve the long-standing problem of "missing" iron in the remnants of Type Ia supernovae.

  8. A Second UV "Light Bulb" behind the SN 1006 Remnant

    E-Print Network [OSTI]

    P. Frank Winkler; Knox S. Long

    1997-07-22T23:59:59.000Z

    A point X-ray source located 9 arcmin northeast of the center of SN~1006 has been spectroscopically identified as a background QSO, with a redshift of 0.335. The object is moderately bright, with magnitude V=18.3. If its ultraviolet spectrum is typical of low-z quasars, this object will be a second (after the Schweizer-Middleditch star) source to use for absorption spectroscopy of material within SN 1006. Absorption spectra provide a unique probe for unshocked ejecta within this supernova remnant, and can possibly solve the long-standing problem of "missing" iron in the remnants of Type Ia supernovae.

  9. Westinghouse and Fuzhou Permitted to Restart Distribution of Light Bulb

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradley Nickell DirectorThe&Management Alert WesternProducts |

  10. How Energy-Efficient Light Bulbs Compare with Traditional Incandescents |

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently20,000 RussianBy: Thomas P. D'Agostino,GlenLearningDepartmentDistributed

  11. The History of the Light Bulb | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you sure you wantJoin us for|Idaho |EnergyTanklessThe CleanThe History ofThe

  12. The History of the Light Bulb | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreakingMayDepartmentTest for PumpingThe Facts on Gas Prices:TheTheHistory ofTheThe

  13. Concord Municipal Light Plant- Commercial Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    Concord Municipal Light Plant (CMLP) offers rebates to commercial customers for a variety of appliances, ETS heating systems, general lighting upgrades, CFL bulbs, and exit sign retrofit kits. A...

  14. Turn Hoang Nguyen

    Office of Scientific and Technical Information (OSTI)

    of polycyclic natural products by Turn Hoang Nguyen A dissertation submitted to the graduate faculty in partial fulfillment of the requirements for the degree of DOCTOR OF...

  15. High efficiency incandescent lighting

    DOE Patents [OSTI]

    Bermel, Peter; Ilic, Ognjen; Chan, Walker R.; Musabeyoglu, Ahmet; Cukierman, Aviv Ruben; Harradon, Michael Robert; Celanovic, Ivan; Soljacic, Marin

    2014-09-02T23:59:59.000Z

    Incandescent lighting structure. The structure includes a thermal emitter that can, but does not have to, include a first photonic crystal on its surface to tailor thermal emission coupled to, in a high-view-factor geometry, a second photonic filter selected to reflect infrared radiation back to the emitter while passing visible light. This structure is highly efficient as compared to standard incandescent light bulbs.

  16. Radiation Dose-Volume Effects and the Penile Bulb

    SciTech Connect (OSTI)

    Roach, Mack, E-mail: mroach@radonc.ucsf.ed [Department of Radiation Oncology, University of California-San Francisco, San Francisco, CA (United States); Nam, Jiho [Department of Radiation Oncology, University of North Carolina at Chapel Hill, Chapel Hill, NC (United States); Gagliardi, Giovanna [Department of Medical Physics, Karolinska University Hospital and Karolinska Institutet, Stockholm (Sweden); El Naqa, Issam; Deasy, Joseph O. [Department of Radiation Oncology, School of Medicine, Washington University in St. Louis, St. Louis, MO (United States); Marks, Lawrence B. [Department of Radiation Oncology, University of North Carolina at Chapel Hill, Chapel Hill, NC (United States)

    2010-03-01T23:59:59.000Z

    The dose, volume, and clinical outcome data for penile bulb are reviewed for patients treated with external-beam radiotherapy. Most, but not all, studies find an association between impotence and dosimetric parameters (e.g., threshold doses) and clinical factors (e.g., age, comorbid diseases). According to the data available, it is prudent to keep the mean dose to 95% of the penile bulb volume to <50 Gy. It may also be prudent to limit the D70 and D90 to 70 Gy and 50 Gy, respectively, but coverage of the planning target volume should not be compromised. It is acknowledged that the penile bulb may not be the critical component of the erectile apparatus, but it seems to be a surrogate for yet to be determined structure(s) critical for erectile function for at least some techniques.

  17. Modlisation des rythmes rapides bta et gamma du bulbe olfactif Nicolas Fourcaud-Trocm

    E-Print Network [OSTI]

    Boyer, Edmond

    Modélisation des rythmes rapides bêta et gamma du bulbe olfactif Nicolas Fourcaud-Trocmé Université mammifères, la première zone corticale traitant l'information olfactive est le bulbe olfactif (BO). Le codage anesthésié. MOTS-CLES bulbe olfactif, oscillations, bêta, gamma, modèle 1. Introduction En neurosciences, les

  18. Onion ipmPIPE -Diagnostic Pocket Series Bulb Growth Stages of Onion (Allium cepa L.)

    E-Print Network [OSTI]

    Pappu, Hanu R.

    Onion ipmPIPE - Diagnostic Pocket Series Bulb Growth Stages of Onion (Allium cepa L.) Fig 1 Fig 2 Fig 3 Fig 4 Fig 5 Fig 6 Fig 7 Fig 8 Allium Type: Fresh Market and Storage Onion Both pre- and post-bulb planting (seeds, transplants, sets). Pre-Bulb Growth Stages 1 ­ radical and flag leaf emergence (10-30 days

  19. Amlioration des plantes Production de bulbes in vitro et de novo

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Amélioration des plantes Production de bulbes in vitro et de novo à partir de tissus de tiges à bulbes, 29260 Ploudaniel; 2 Université Blaise Pascal, laboratoire de physiologie et génétique décembre 1992) Résumé — L'obtention de novo de bulbes in vitro est possible chez la tulipe dans un

  20. Behavioral/Systems/Cognitive Olfactory Bulb Gamma Oscillations Are Enhanced with

    E-Print Network [OSTI]

    Kopell, Nancy

    Behavioral/Systems/Cognitive Olfactory Bulb Gamma Oscillations Are Enhanced with Task Demands.However,thereisstillnodirectevidencethatsuchoscillationsareintrinsicallyalteredinintactsystems to aid in stimulus disambiguation. Here we show that gamma oscillatory power in the rat olfactory bulb; sensory acuity; beta oscillations; olfactory bulb; piriform (pyriform) Introduction The chemotopic

  1. Dendrodendritic Inhibition in the Olfactory Bulb Is Driven by NMDA Receptors

    E-Print Network [OSTI]

    Betz, William J.

    Dendrodendritic Inhibition in the Olfactory Bulb Is Driven by NMDA Receptors Nathan E. Schoppa,1 J synapses between mitral and granule cells in the rat olfactory bulb. In whole-cell patch-clamp recordings in bulb slices, stimulation of mitral cells elicited slowly decaying, GABAA receptor-mediated reciprocal

  2. ACTION DE L'ABLATION DES BULBES OLFACTIFS SUR LES MCANISMES DE LA REPRODUCTION

    E-Print Network [OSTI]

    Boyer, Edmond

    ACTION DE L'ABLATION DES BULBES OLFACTIFS SUR LES MÉCANISMES DE LA REPRODUCTION CHEZ LA TRUIE J. P Recheyches zoolechniques, Jouy-en-Josas (Seine et Oise). SOMMAIRE L'ablation chirurgicale des bulbes involution utérine. L'ablation totale des bulbes olfactifs semble donc perturber la décharge des hormones

  3. STABLE FREQUENCY RESPONSE TO VARYING STIMULUS INTENSITY IN A MODEL OF THE RAT OLFACTORY BULB

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    STABLE FREQUENCY RESPONSE TO VARYING STIMULUS INTENSITY IN A MODEL OF THE RAT OLFACTORY BULB Thomas Neurosciences et Systèmes sensoriels, CNRS UMR 5020, Lyon, France ABSTRACT In the rat olfactory bulb (OB), fast. Introduction The rat olfactory bulb (OB) is a rich and complex sensory processing system that shows stimulus

  4. Editorial Focus Fish Smell. Focus on "Odorant Specificity of Single Olfactory Bulb Neurons

    E-Print Network [OSTI]

    Stephens, Jacqueline

    Editorial Focus Fish Smell. Focus on "Odorant Specificity of Single Olfactory Bulb Neurons to Amino bulb, or antennal lobe. The precise nature of these odor features is yet to be determined for the most of this type in the fish, precise subclasses of olfactory bulb neurons for coding biologically significant

  5. Dendrodendritic Inhibition and Simulated Odor Responses in a Detailed Olfactory Bulb Network Model

    E-Print Network [OSTI]

    Feng, Jianfeng

    Dendrodendritic Inhibition and Simulated Odor Responses in a Detailed Olfactory Bulb Network Model responses in a detailed olfac- tory bulb network model. J Neurophysiol 90: 1921­1935, 2003. First published May 7, 2003; 10.1152/jn.00623.2002. In the olfactory bulb, both the spatial distribution

  6. Neuronal representation of odourants in the olfactory bulb of Xenopus laevis tadpoles

    E-Print Network [OSTI]

    Neuronal representation of odourants in the olfactory bulb of Xenopus laevis tadpoles Dirk Czesnik representation, olfactory bulb Abstract When an odourant enters the nose, olfactory receptor neurons (ORNs) convey information about it to the olfactory bulb (OB), where this information is processed and where

  7. Rhythm sequence through the olfactory bulb layers during the time window of a respiratory cycle

    E-Print Network [OSTI]

    Roux, Stephane

    Rhythm sequence through the olfactory bulb layers during the time window of a respiratory cycle 07, France Keywords: LFP, olfactory bulb, oscillations, rat, synchronization Abstract The mammalian olfactory bulb is characterized by prominent oscillatory activity of its local ®eld potentials. Breathing

  8. Structure of lateral inhibition in an olfactory bulb Andrew Davison, Jianfeng Feng, and David Brown

    E-Print Network [OSTI]

    Feng, Jianfeng

    Structure of lateral inhibition in an olfactory bulb model Andrew Davison, Jianfeng Feng, and David Abstract. It has been shown that mutual lateral inhibition of the projection neurones in the olfactory bulb, mediated by interneurones, serves to tune the representation of odours in the bulb and reduce the overlap

  9. THE EFFECT OF SNOWPACK WARMING ON THE STRESS BULB BELOW A SKIER Thomas Exner *

    E-Print Network [OSTI]

    Jamieson, Bruce

    THE EFFECT OF SNOWPACK WARMING ON THE STRESS BULB BELOW A SKIER Thomas Exner * Dept. of Geoscience exist to quantify or validate the temperature effect on the stress bulb below a skier. In this study we periods. Increasing temperatures of the near-surface layers altered the shape of the stress bulb, but so

  10. Linear programming applied to the ower sector: a Gladiolus bulb production case study

    E-Print Network [OSTI]

    Dragoti-Çela, Eranda

    Linear programming applied to the ¯ower sector: a Gladiolus bulb production case study Jose representative Brazilian bulb growing and trading company's decision making process, during the Gladiolus production planning activity. The pertinent LP model was focused on client's bulb requests to be attended

  11. Photoperiod Mediated Changes in Olfactory Bulb Neurogenesis and Olfactory Behavior in Male White-

    E-Print Network [OSTI]

    Nelson, Randy J.

    Photoperiod Mediated Changes in Olfactory Bulb Neurogenesis and Olfactory Behavior in Male White to long day lengths (LD) and short day lengths (SD) for 10 to 15 weeks and then examined olfactory bulb cell proliferation and survival using the thymidine analog BrdU, olfactory bulb granule cell morphology

  12. fMRI visualisation of transient activations in the rat olfactory bulb using short odour stimulations

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    fMRI visualisation of transient activations in the rat olfactory bulb using short odour in the olfactory bulb OB displays both spatial and temporal organization. The difficulty when assessing spatio of the olfactory bulb (OB). Hence, in this structure, the identity of odorants is associated with a unique spatial

  13. Calcium Influx through NMDA Receptors Directly Evokes GABA Release in Olfactory Bulb Granule Cells

    E-Print Network [OSTI]

    Strowbridge, Ben

    Calcium Influx through NMDA Receptors Directly Evokes GABA Release in Olfactory Bulb Granule Cells, Case Western Reserve University, Cleveland, Ohio 44106-4975 Recurrent inhibition in olfactory bulb on the activation of NMDA receptors. Using whole-cell recordings from rat olfactory bulb slices, we now show

  14. Influence du poids et de la densit de plantation des bulbes d'chalote sur les caractristiques de

    E-Print Network [OSTI]

    Boyer, Edmond

    Influence du poids et de la densité de plantation des bulbes d'échalote sur les caractéristiques de la récolte et la prolificité des bulbes-fils Joseph COHAT Corentin TROMEUR LN.R.A., Station damélioration de la Pomme de terre et des Plantes à bulbes, F 29207 Landerneau RÉSUMÉ Des bulbes d'échalote de

  15. Influence d'un trempage des bulbes dans une solution d'acide 2-chloro thylphosphonique (thphon) sur la

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Influence d'un trempage des bulbes dans une solution d'acide 2-chloro éthylphosphonique (éthéphon la Pomme de terre et des Plantes à bulbes, F 29207 Landerneau RÉSUMÉ Le trempage des bulbes d augmentation du pourcentage de floraison. Ceci résulte d'une diminution du nombre de bulbes qui Ethéphon

  16. Diamond turning of glass

    SciTech Connect (OSTI)

    Blackley, W.S.; Scattergood, R.O.

    1988-12-01T23:59:59.000Z

    A new research initiative will be undertaken to investigate the critical cutting depth concepts for single point diamond turning of brittle, amorphous materials. Inorganic glasses and a brittle, thermoset polymer (organic glass) are the principal candidate materials. Interrupted cutting tests similar to those done in earlier research are Ge and Si crystals will be made to obtain critical depth values as a function of machining parameters. The results will provide systematic data with which to assess machining performance on glasses and amorphous materials

  17. Electrodeless lighting RF power source development. Final report

    SciTech Connect (OSTI)

    NONE

    1996-08-30T23:59:59.000Z

    An efficient, solid state RF power source has been developed on this NICE project for exciting low power electrodeless lamp bulbs. This project takes full advantage of concurrent advances in electrodeless lamp technology. Electrodeless lamp lighting systems utilizing the sulfur based bulb type developed by Fusion Lighting, Inc., is an emerging technology which is based on generating light in a confined plasma created and sustained by RF excitation. The bulb for such a lamp is filled with a particular element and inert gas at low pressure when cold. RF power from the RF source creates a plasma within the bulb which reaches temperatures approaching those of high pressure discharge lamp plasmas. At these temperatures the plasma radiates substantial visible light with a spectrum similar to sunlight.

  18. EnergyUnited- Commercial Energy Efficient Lighting Rebate Program

    Broader source: Energy.gov [DOE]

    Commercial and industrial members who upgrade to energy-efficient light bulbs which meet EnergyUnited's standards are eligible for a prescriptive, "per unit" rebate. The cooperative will provide a...

  19. Turning fungus into fuel

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening aTurbulence may be key to "fast magneticTurn Your

  20. Estimating Wet Bulb Globe Temperature Using Standard Meteorological Measurements

    SciTech Connect (OSTI)

    Hunter, C.H.

    1999-11-18T23:59:59.000Z

    The heat stress management program at the Department of Energy''s Savannah River Site (SRS) requires implementation of protective controls on outdoor work based on observed values of wet bulb globe temperature (WBGT). To ensure continued compliance with heat stress program requirements, a computer algorithm was developed which calculates an estimate of WBGT using standard meteorological measurements. In addition, scripts were developed to generate a calculation every 15 minutes and post the results to an Intranet web site.

  1. Turning on LAMP

    SciTech Connect (OSTI)

    Bostedt, Christoph

    2014-06-30T23:59:59.000Z

    Christoph Bostedt, a senior staff scientist at SLAC's Linac Coherent Light Source X-ray laser, provides a sneak peek of a powerful new instrument, called LAMP, that is now available for experiments that probe the atomic and molecular realm. LAMP replaces and updates the first instrument at LCLS, dubbed CAMP, which will be installed at an X-ray laser in Germany.

  2. Turning on LAMP

    ScienceCinema (OSTI)

    Bostedt, Christoph

    2014-07-16T23:59:59.000Z

    Christoph Bostedt, a senior staff scientist at SLAC's Linac Coherent Light Source X-ray laser, provides a sneak peek of a powerful new instrument, called LAMP, that is now available for experiments that probe the atomic and molecular realm. LAMP replaces and updates the first instrument at LCLS, dubbed CAMP, which will be installed at an X-ray laser in Germany.

  3. Development of Diagnostic Rules for a Dry Bulb Economizer Mixed Air Loop

    E-Print Network [OSTI]

    Underwood, D.

    1990-01-01T23:59:59.000Z

    knowledge base for a two fan variable air volume (VAV) air handling unit. Rules for the mixed air loop with a dry bulb economizer are presented....

  4. Microwave-driven ultraviolet light sources

    SciTech Connect (OSTI)

    Manos, Dennis M. (Williamsburg, VA); Diggs, Jessie (Norfolk, VA); Ametepe, Joseph D. (Roanoke, VA)

    2002-01-29T23:59:59.000Z

    A microwave-driven ultraviolet (UV) light source is provided. The light source comprises an over-moded microwave cavity having at least one discharge bulb disposed within the microwave cavity. At least one magnetron probe is coupled directly to the microwave cavity.

  5. Lighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electron 9 5Let us countLighting Sign In About | Careers |

  6. University of Winnipeg Department of Theatre and Film Safe Handling of Lighting Instruments Updated: 09/2010

    E-Print Network [OSTI]

    Martin, Jeff

    . - Depending on the facility you are working in wattages may vary. Replace bulbs only of the same type the pipe and lower or hand it down to a spotter. CHANGING LAMPS: - The light must be physically unplugged to change a bulb you must wait a minimum of 5 minutes after the lamp has been on and you must use gloves

  7. Randolph EMC- Commercial and Industrial Efficient Lighting Rebate Program (North Carolina)

    Broader source: Energy.gov [DOE]

    Commercial and industrial members who upgrade to energy-efficient light bulbs which meet Randolph EMC's standards are eligible for a prescriptive incentive payment. The cooperative will provide a...

  8. Olfactory deprivation increases dopamine D2 receptor density in the rat olfactory bulb

    SciTech Connect (OSTI)

    Guthrie, K.M.; Pullara, J.M.; Marshall, J.F.; Leon, M. (University of California, Irvine (USA))

    1991-05-01T23:59:59.000Z

    Unilateral olfactory deprivation during postnatal development results in significant anatomical and neurochemical changes in the deprived olfactory bulb. Perhaps the most dramatic neurochemical change is the loss of dopaminergic expression by neurons of the glomerular region. The authors describe here the effects of early olfactory deprivation on other elements of the bulb dopaminergic system, namely the dopamine receptors of the olfactory bulb. Rat pups had a single naris occluded on postnatal day 2 (PN2). On PN20 or PN60, animals were sacrificed and the bulbs were examined for catecholamine levels or D2 and D1 dopamine receptor binding. Receptor densities were quantified by in vitro autoradiography using the tritiated antagonists spiperone (D2) and SCH23390 (D1). Dopamine uptake sites were similarly examined using tritiated mazindol. No significant specific labeling of D1 or mazindol sites was observed in the olfactory bulbs of control or experimental animals at either age. Normal animals displayed prominent labeling of D2 sites in the glomerular and nerve layers. After 60 days of deprivation, deprived bulbs exhibited an average increase in D2 receptor density of 32%. As determined by Scatchard analysis, the mean values for Kd and Bmax were 0.134 nM and 293 fmol/mg protein in normal bulbs, and 0.136 nM and 403 fmol/mg protein in deprived bulbs. The results suggest that, as in the neostriatum, dopamine depletion in the olfactory bulb leads to an upregulation of D2 receptor sites. This change may represent an attempt by the system to adapt neurochemically to reduced dopaminergic activity and thereby maintain bulb function.

  9. Influence des conditions de conservation des bulbes d'chalote (Allium cepa L. var. aggregatum) sur leur

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Influence des conditions de conservation des bulbes d'échalote (Allium cepa L. var. aggregatum) sur leur levée Joseph COHAT LN.R.A., Station d'Amélioration de la Pomme de terre & des Plantes à bulbes, F 29207 Landerneau RÉSUMÉ Les bulbes d'échalote de Jersey (type demi-longue) sont dormants au moment de la

  10. A Bit About Bulbs Night temperatures are cool, the air is almost crisp. The vegetable harvest is tapering

    E-Print Network [OSTI]

    New Hampshire, University of

    A Bit About Bulbs Night temperatures are cool, the air is almost crisp. The vegetable harvest! There is always something to do, and right now is the time to plant spring-flowering bulbs. Whether your preference is for naturalized or formal bulb plantings, on a small or large scale, keep kinds and colors

  11. Impairment of Neurogensis in the Olfactory Bulb of Transgenic Mice Overexpressing Human Wildtype Alpha Synuclein Under the Thy-1 Promoter

    E-Print Network [OSTI]

    Allman, John M.

    Impairment of Neurogensis in the Olfactory Bulb of Transgenic Mice Overexpressing Human Wildtype, cortex and olfactory bulb (Rockenstein et al., 2002). These mice demonstrate early and progressive motor by olfactory ensheathing glia, and eventually reach the olfactory bulb (Gritti et al., 2002). Recent studies

  12. Dynamical Mechanisms of Odor Processing in Olfactory Bulb Mitral Cells Daniel B. Rubin and Thomas A. Cleland

    E-Print Network [OSTI]

    Cleland, Thomas A.

    Dynamical Mechanisms of Odor Processing in Olfactory Bulb Mitral Cells Daniel B. Rubin and Thomas A- nisms of odor processing in olfactory bulb mitral cells. J Neuro- physiol 96: 555­568, 2006. First, conductance-based compartmental model of olfactory bulb mitral cells that exhibits the complex dynamical

  13. Stability of fast oscillations in mammalian olfactory bulb: experiment and modeling Nicolas Fourcaud-Trocmea,b,c,d,

    E-Print Network [OSTI]

    Voegtlin, Thomas

    Stability of fast oscillations in mammalian olfactory bulb: experiment and modeling Nicolas Cortex, Vandoeuvre-les-Nancy, F-54506, France Abstract In the rat olfactory bulb (OB), fast oscillations observed stability of the oscillatory regimes. Keywords: olfactory bulb, beta oscillations, gamma

  14. Odor vapor pressure and quality modulate local field potential oscillatory patterns in the olfactory bulb of the

    E-Print Network [OSTI]

    Roux, Stephane

    in the olfactory bulb of the anesthetized rat Tristan Cenier,1 Corine Amat,1 Philippe Litaudon,1 Samuel Garcia,1 potentials, molecular features, olfactory bulb, oscillations, respiratory cycle Abstract A central question-temporal pattern of activation in the olfactory bulb (OB), in both glomerular and mitral cell layers. Mitral

  15. Tune Evaluation From Phased BPM Turn-By-Turn Data

    E-Print Network [OSTI]

    Alexahin, Y; Marsh, W

    2012-01-01T23:59:59.000Z

    In fast ramping synchrotrons like the Fermilab Booster the conventional methods of betatron tune evaluation from the turn-by-turn data may not work due to rapid changes of the tunes (sometimes in a course of a few dozens of turns) and a high level of noise. We propose a technique based on phasing of signals from a large number of BPMs which significantly increases the signal to noise ratio. Implementation of the method in the Fermilab Booster control system is described and some measurement results are presented.

  16. Tune Evaluation From Phased BPM Turn-By-Turn Data

    SciTech Connect (OSTI)

    Alexahin, Y.; Gianfelice-Wendt, E.; Marsh, W.; /Fermilab

    2010-05-18T23:59:59.000Z

    In fast ramping synchrotrons like the Fermilab Booster the conventional methods of betatron tune evaluation from the turn-by-turn data may not work due to rapid changes of the tunes (sometimes in a course of a few dozens of turns) and a high level of noise. We propose a technique based on phasing of signals from a large number of BPMs which significantly increases the signal to noise ratio. Implementation of the method in the Fermilab Booster control system is described and some measurement results are presented.

  17. Odor recognition and segmentation by coupled olfactory bulb and cortical networks

    E-Print Network [OSTI]

    Li, Z; Li, Zhaoping; Hertz, John

    1999-01-01T23:59:59.000Z

    We present a model of a coupled system of the olfactory bulb and cortex. Odor inputs to the epithelium are transformed to oscillatory bulbar activities. The cortex recognizes the odor by resonating to the bulbar oscillating pattern when the amplitude and phase patterns from the bulb match an odor memory stored in the intracortical synapses. We assume a cortical structure which transforms the odor information in the oscillatory pattern to a slow DC feedback signal to the bulb. This feedback suppresses the bulbar response to the pre-existing odor, allowing subsequent odor objects to be segmented out for recognition.

  18. Inverted lVIicroscope DIAPHOT-TMD

    E-Print Network [OSTI]

    Kleinfeld, David

    lamp bulb to be used is 12V- 50W. Do not use 12V-l00W halogen lamp bulb. If the lamp bulb of over the lamp is being lighted. o Exchanging the lamp bulb and fuse Before replacing the lamp bulb or fuse, turn as of replacement, do not touch. the lamp bulb with bare hands, immediately after putting out the lamp. 2 Dirt

  19. LACKEY, PAUL E. An Investigation of Bridge Deck Overhang Falsework Systems Installed onto Bulb Tee Girders. (Under the direction of Dr. Emmett Sumner.)

    E-Print Network [OSTI]

    Bulb Tee Girders. (Under the direction of Dr. Emmett Sumner.) Bulb Tee girders provide a practical moments of inertia to withstand the massive moments created in the spans. A bulb tee girder possesses the thin top flange of an exterior bulb tee girder in the bridge deck overhang falsework system to fail

  20. A critical period for activity-dependent synaptic development during olfactory bulb adult neurogenesis

    E-Print Network [OSTI]

    Kelsch, Wolfgang

    New neurons integrate in large numbers into the mature olfactory bulb circuit throughout life. The factors controlling the synaptic development of adult-born neurons and their connectivity remain essentially unknown. We ...

  1. 2.44a0005 Physiology of the Main Olfactory Bulb Matthew Ennis1

    E-Print Network [OSTI]

    Hayar, Abdallah

    -inhibition 27 2.44.6.4.2 Lateral inhibition 27 2.44.6.4.3 Role of Ca2þ influx through NMDA receptors and voltage.44.8 Neurophysiology of Primary Olfactory Cortical Inputs to Main Olfactory Bulb 29 2.44.9 Oscillations and Synchrony in Main Olfactory Bulb 29 2.44.9.1 Oscillations 29 2.44.9.1.1 Theta rhythm 30 2.44.9.1.2 Gamma rhythm 30 2

  2. Interrelationships between air velocity and natural wet-bulb thermometer response

    E-Print Network [OSTI]

    Jones, Nathan Glenn

    1983-01-01T23:59:59.000Z

    INTERRELATIONSHIPS BETWEEN AIR VFLOCITY ANO NATURAL WET-BULB THERMOMETER RESPONSE A Thesis by NATHAN GLENN JONES Submitted to the Graduate Colleqe of Texas ASM University i n partial fulfillment of the requirement for the degree of MASTER... OF SCIENCE AUGUST 1983 Major Subject: Industrial Hygiene INTERRELATIONSHIPS BETWEEN AIR VELOCITY AND NATURAL WET-BULB THERMOMETER RESPONSE A Thesis by NATHAN GLENN JONES Approved as to style an content by: airman o ommittee er Member ~~' A~ Member...

  3. Magnet Coil Shorted Turn Detector

    SciTech Connect (OSTI)

    Dinkel, J.A.; Biggs, J.E.

    1994-03-01T23:59:59.000Z

    The Magnet Coil Shorted Turn Detector has been developed to facilitate the location of shorted turns in magnet coils. Finding these shorted turns is necessary to determine failure modes that are a necessary step in developing future production techniques. Up to this point, coils with shorted turns had the insulation burned off without the fault having been located. This disassembly process destroyed any chance of being able to find the fault. In order to maintain a flux balance in a coupled system such as a magnet coil, the current in a shorted turn must be opposed to the incident current. If the direction of the current in each conductor can be measured relative to the incident current, then the exact location of the short can be determined. In this device, an AC voltage is applied to the magnet under test. A small hand held B-dot pickup coil monitors the magnetic field produced by current in the individual magnet conductors. The relative phase of this pickup coil voltage is compared to a reference signal derived from the input current to detect a current reversal as the B-dot pickup coil is swept over the conductors of the coil under test. This technique however, is limited to only those conductors that are accessible to the hand held probe.

  4. Turning greenhouse gases into gold

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening aTurbulence may be key to "fast magneticTurn YourTurning

  5. Diamond turning machine controller implementation

    SciTech Connect (OSTI)

    Garrard, K.P.; Taylor, L.W.; Knight, B.F.; Fornaro, R.J.

    1988-12-01T23:59:59.000Z

    The standard controller for a Pnuemo ASG 2500 Diamond Turning Machine, an Allen Bradley 8200, has been replaced with a custom high-performance design. This controller consists of four major components. Axis position feedback information is provided by a Zygo Axiom 2/20 laser interferometer with 0.1 micro-inch resolution. Hardware interface logic couples the computers digital and analog I/O channels to the diamond turning machine`s analog motor controllers, the laser interferometer, and other machine status and control information. It also provides front panel switches for operator override of the computer controller and implement the emergency stop sequence. The remaining two components, the control computer hardware and software, are discussed in detail below.

  6. Diamond turning of thermoplastic polymers

    SciTech Connect (OSTI)

    Smith, E.; Scattergood, R.O.

    1988-12-01T23:59:59.000Z

    Single point diamond turning studies were made using a series of thermoplastic polymers with different glass transition temperatures. Variations in surface morphology and surface roughness were observed as a function of cutting speed. Lower glass transition temperatures facilitate smoother surface cuts and better surface finish. This can be attributed to the frictional heating that occurs during machining. Because of the very low glass transition temperatures in polymeric compared to inorganic glasses, the precision machining response can be very speed sensitive.

  7. TurningPoint Evaluation Results

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergyTransportation WorkDecember 28, 2004 PartTurning on the Fan

  8. The average (mean) of a set of n numbers y1, y2, , yn is yave = y = y =

    E-Print Network [OSTI]

    Feldman, Joel

    . Example 2 Example 3 If you plug, for example, a light bulb into a socket and turn it on, the light bulb at which the voltage is zero If the light bulb has resistance R ohms, this causes, by Ohm's law, a current of I(t) = 1 R V (t) (amps) to flow through the light bulb. The current I is the number of units

  9. System and method for monitoring wet bulb temperature in a flue gas stream

    SciTech Connect (OSTI)

    Glover, R.L.; Bland, V.V.

    1990-01-02T23:59:59.000Z

    This patent describes in a system for monitoring wet bulb temperature in a flue gas stream means for extracting a sample of the gas from the flue, means for heating the sample to maintain the sample at substantially the same temperature as the gas in the flue, a sensor for measuring the wet bulb temperature of the sample, a reservoir of liquid, a liquid absorbent wick surrounding the sensor and extending into the liquid in the reservoir, and means for maintaining the liquid in the reservoir at a substantially constant level.

  10. Essays on Environmental and Resource Economics

    E-Print Network [OSTI]

    Toledo, Chantal Nathalie

    2013-01-01T23:59:59.000Z

    Light Bulb Offer (UC BerkeleyBetween Light Bulbs . . . . . . . . . . . . . . . . .Reasons for the Light Bulb Choice, ILB (left) or LED (right)

  11. Consumer Light Bulb Changes: Briefing and Resources for Media and Retailers

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'sEnergyTexas1.SpaceFluor Federal ServicesDepartment ofDepartment of|

  12. Westinghouse Pays $50,000 Civil Penalty to Resolve Light Bulb Efficiency

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradley Nickell DirectorThe&Management Alert Western

  13. What Light Bulbs Do You Use in Your Home? | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradley Nickell DirectorThe&Management AlertWhatOnOn

  14. Buying the Perfect Energy-Efficient Light Bulb in 5 Easy Steps | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube platformBuilding Removal Ongoing atGreenhouse GasesRespond to

  15. A Winning Light Bulb With the Potential to Save the Nation Billions |

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you sure you wantJoin us for|IdahotheWhatProposed - FINALAA Tale of

  16. DOE Requires Westinghouse to Cease Sales of Two Light Bulb Models and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"WaveInteractions and PolicyCybersecurity ThreatsViolatingAllows Sale of

  17. DOE Withdraws the Energy Star Label from 34 Compact Fluorescent Light Bulbs

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"WaveInteractionsMaterials | DepartmentEnergy Will Not| Department

  18. Bulbs for Winter Bloom The trees have all dropped their leaves and our gardens are covered by a blanket of snow. It is too

    E-Print Network [OSTI]

    New Hampshire, University of

    Bulbs for Winter Bloom The trees have all dropped their leaves and our gardens are covered into an inside garden. Paperwhite Narcissus and Amaryllis bulbs both produce beautiful flowers. They are easy bulbs to grow inside a house. Paperwhites come in two colors, white and yellow. They are extremely easy

  19. Instructions for Corning Model 220 pH Meter The electrode tip is a fragile glass bulb. Be careful or you will break it with a

    E-Print Network [OSTI]

    Cross, George

    Instructions for Corning Model 220 pH Meter The electrode tip is a fragile glass bulb. Be careful a polymer body electrode can create sufficient internal pressure to "explode" the glass bulb. When of cotton in the plastic electrode cover sleeve, add pH 7 buffer, and insert the electrode bulb

  20. UNH Cooperative Extension Info Line Question of the Week Q. What should I do with the Amaryllis bulb I just received?

    E-Print Network [OSTI]

    New Hampshire, University of

    bulb I just received? A. Few flowers give greater satisfaction than the spectacular amaryllis. Amaryllis are available from September to March as dormant bulbs ready for planting. They can be purchased as bulbs or as pre packaged units complete with pots and potting medium. Shortly after planting one or two

  1. Plant Disease Note 2004 | Iris Yellow Spot Virus in Onion Bulb and Seed Crops in Washington Overview Current Issue Past Issues Search PD Search APS Journals

    E-Print Network [OSTI]

    Pappu, Hanu R.

    Plant Disease Note 2004 | Iris Yellow Spot Virus in Onion Bulb and Seed Crops in Washington Yellow Spot Virus in Onion Bulb and Seed Crops in Washington. L. J. du Toit, Washington State University of the NP gene. In August 2003, symptoms of IYSV infection were observed in two onion bulb crops, each

  2. Light and Plants Plants use light to photosynthesize. Name two places that light can come from

    E-Print Network [OSTI]

    Koptur, Suzanne

    Light and Plants Plants use light to photosynthesize. Name two places that light can come from: 1 (CO2, a gas) from the air and turn it into SUGARS (food). This process is powered by energy from light plants) for energy. Photosynthetically Active Radiation (PAR) is a combination of red light and blue

  3. 60 Years Since Nuclear Turned on the Lights

    Broader source: Energy.gov [DOE]

    On the 60th anniversary of the world’s first nuclear power plant to produce electricity, Assistant Secretary for Nuclear Energy Peter Lyons discusses the Energy Department's and the Administration's commitment to promoting a nuclear renaissance in the United States.

  4. Turning off the lights: How dark is dark matter?

    SciTech Connect (OSTI)

    McDermott, Samuel D.; Yu Haibo; Zurek, Kathryn M. [Michigan Center for Theoretical Physics, Department of Physics, University of Michigan, Ann Arbor, Michigan 48109 (United States)

    2011-03-15T23:59:59.000Z

    We consider current observational constraints on the electromagnetic charge of dark matter. The velocity dependence of the scattering cross section through the photon gives rise to qualitatively different constraints than standard dark matter scattering through massive force carriers. In particular, recombination epoch observations of dark matter density perturbations require that {epsilon}, the ratio of the dark matter to electronic charge, is less than 10{sup -6} for m{sub X}=1 GeV, rising to {epsilon}<10{sup -4} for m{sub X}=10 TeV. Though naively one would expect that dark matter carrying a charge well below this constraint could still give rise to large scattering in current direct detection experiments, we show that charged dark matter particles that could be detected with upcoming experiments are expected to be evacuated from the Galactic disk by the Galactic magnetic fields and supernova shock waves and hence will not give rise to a signal. Thus dark matter with a small charge is likely not a source of a signal in current or upcoming dark matter direct detection experiments.

  5. When to Turn Off Your Lights | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015ofDepartment of EnergyThe U.S. Department ofFebruary 27, 2015What

  6. When to Turn Off Your Lights | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your DensityEnergy U.S.-China Electric VehicleCenters | Department ofofto Purchase Premium Efficiency

  7. Energy-Efficient Lighting The typical American family spends more

    E-Print Network [OSTI]

    Energy-Efficient Lighting The typical American family spends more than $1,500 a year on household their energy efficiency is taken into account. CFLs last 8­10 times longer than standard incandescent bulbs energy bills--and many households spend considerably more. Costs could climb even higher in the future

  8. Volunteer Potato Density Influences Critical Time of Weed Removal in Bulb Onion

    E-Print Network [OSTI]

    Sims, Gerald K.

    Volunteer Potato Density Influences Critical Time of Weed Removal in Bulb Onion Martin M. Williams II, Corey V. Ransom, and W. Mack Thompson* Volunteer potato is highly competitive with onion and few control tactics are effective for removing this weed from an onion crop. Both volunteer potato density

  9. Lighting affects appearance LightSource emits photons

    E-Print Network [OSTI]

    Jacobs, David

    1 Lighting affects appearance #12;2 LightSource emits photons Photons travel in a straight line). And then some reach the eye/camera. #12;3 Basic fact: Light is linear Double intensity of sources, double photons reaching eye. Turn on two lights, and photons reaching eye are same as sum of number when each

  10. Some cultural practices affecting bulb rot, plant and floral development, and seed yield of the White Grano onion

    E-Print Network [OSTI]

    Enzie, Joseph Vincent

    1955-01-01T23:59:59.000Z

    L IBRARY A&IW COLLEGE OF TEXAS SOME CULTURAL PRACTICES AFFECTING BULB ROT, PLANT AND FLORAL DEVELOPMENT, AND SEED YIELD OF THE WHITE GRANO ONION A Dissertation By JOSEPH V. ENZIE Submitted to the Graduate School of the Agricultural... and Mechanical College of Texas in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY May 1955 Major Subject: Horticulture SOME CULTURAL PRACTICES AFFECTING BULB ROT, PLANT AND FLORAL DEVELOPMENT, AND SEED YIELD OF THE WHITE GRANO...

  11. Use of diamond-turned mirrors for synchrotron radiation (SR)

    SciTech Connect (OSTI)

    Howells, M.R.; Takacs, P.Z.

    1981-01-01T23:59:59.000Z

    The diamond turning technique has great interest for users of synchrotron radiation because of its ability to produce surfaces of arbitrary shape. It also has the advantage of being well adapted to producing metal optics. These are of interest because they lend themselves to water cooling and hence represent one approach to the problem of high synchrotron radiation power loadings on optical surfaces. The optical figure produced by diamond turning is generally adequate for synchrotron radiation applications. The main difficulty centers around the question of smoothness. Diamond turned surfaces must receive a final polish after machining before they are sufficiently smooth for use with ultra-violet or x-ray radiation. The manufacturing stages can be carried out by various groups in the optics industry and the National Synchrotron Light Source has procured a considerable number of mirrors and is having them polished for use on the vuv storage ring. At the time of writing one mirror has been completed and evaluated and we give the results for this and discuss the indications for the future. The important measurement of the r.m.s. height of the surface roughness has given a value of 3 +- 0.9A using total integrated scatter of visible light at normal incidence.

  12. Identifying Lights with their Switches Jayadev Misra

    E-Print Network [OSTI]

    Misra, Jayadev

    Identifying Lights with their Switches Jayadev Misra 09/07/2012 Problem Description Given are N switches and N lights where each switch controls exactly one light and each light is controlled by exactly of selecting some number of switches and turning them on, and, presumably, noting the lights that come

  13. Collaborative Unit Construction in Korean: Pivot Turns

    E-Print Network [OSTI]

    Ju, Hee

    2011-01-01T23:59:59.000Z

    A. (1996). Practices in the construction of turns: the ‘TCU’Scheutz, H. (2005). Pivot constructions in spoken German. InM. (2000). The construction of units in conversational talk.

  14. ONION (Allium cepa, 47 cultivars) B.K. Schroeder, Washington State University (WSU), Pullman, Enterobacter bulb decay; Enterobacter cloacae WA 99164; T.D. Waters, WSU Franklin Co. Extension, Pasco WA

    E-Print Network [OSTI]

    Schroeder, Brenda K.

    , Enterobacter bulb decay; Enterobacter cloacae WA 99164; T.D. Waters, WSU Franklin Co. Extension, Pasco WA 99301 in storage in Washington State, 2008-2009. An onion bulb storage trial was completed to survey 47 storage to Enterobacter cloacae, causal agent of Enterobacter bulb decay. Seeds of each cultivar were planted near Pasco

  15. ONION (Allium cepa, 55 cultivars) B.K. Schroeder, Washington State University (WSU), Pullman, Enterobacter bulb decay; Enterobacter cloacae WA 99164; T. Waters, WSU Franklin Co. Extension, Pasco WA

    E-Print Network [OSTI]

    Schroeder, Brenda K.

    , Enterobacter bulb decay; Enterobacter cloacae WA 99164; T. Waters, WSU Franklin Co. Extension, Pasco WA 99301 for resistance to Enterobacter cloacae in storage, 2007-2008. An onion bulb storage trial was completed to survey for resistance to Enterobacter cloacae, causal agent of Enterobacter bulb decay. Seeds of each cultivar were

  16. HEADLAND TURNING CONTROL METHOD SIMULATION OF AUTONOMOUS

    E-Print Network [OSTI]

    Nagasaka et al., 2004). This method could minimize the headland space but makes steering controlHEADLAND TURNING CONTROL METHOD SIMULATION OF AUTONOMOUS AGRICULTRUAL MACHINE BASED ON IMPROVED PURE PURSUIT MODEL Peichen Huang1 , Xiwen Luo 2,* , Zhigang Zhang 3 Key Laboratory of Key Technology

  17. Turning waste into energy beats landfilling

    E-Print Network [OSTI]

    Columbia University

    Turning waste into energy beats landfilling By Christopher Hume The Hamilton Spectator (Nov 16, the fact remains that dumping garbage in a landfill site is far more environmentally destructive, damaging wrong with that picture: it describes landfill, where spontaneous combustion occurs regularly

  18. The Buck Institute Turned to Geothermal

    E-Print Network [OSTI]

    The Buck Institute Turned to Geothermal Heating and Cooling for Significant Savings on Energy with the goal of sustaining the healthy years of life... #12;Geothermal Exchange #12;§ Cooling Tower: One. Other Challenges to the Original Central Plant: #12;The geothermal well field replaces the cooling tower

  19. Mechanical & Aerospace Engineering Turning Ideas into Reality

    E-Print Network [OSTI]

    Mottram, Nigel

    Mechanical & Aerospace Engineering Turning Ideas into Reality EnErgy Environ m Ent HEaltH mat Overview The Courses Mechanical Engineering (MEng / BEng) Mechanical Engineering With International Study (MEng / BEng) Aero-Mechanical Engineering (MEng / BEng) E N T r y F A Q S A p p l y i n g C a m p u

  20. Mechanical Engineering Turning Ideas into Reality

    E-Print Network [OSTI]

    Mottram, Nigel

    Mechanical Engineering Turning Ideas into Reality EnErgy Environ m Ent HEaltH matEria ls transpo rt u r s e s ? Home The Department Overview The Courses Mechanical Engineering (MEng / BEng) Mechanical Engineering With International Study (MEng / BEng) Aero-Mechanical Engineering (MEng / BEng) #12;tHE DEpartm

  1. "Table HC12.13 Lighting Usage Indicators by Midwest Census Region...

    U.S. Energy Information Administration (EIA) Indexed Site

    Central","West North Central" "Total U.S. Housing Units",111.1,25.6,17.7,7.9 "Indoor Lights Turned On During Summer" "Number of Lights Turned On" "Between 1 and 4 Hours per...

  2. "Table HC11.13 Lighting Usage Indicators by Northeast Census...

    U.S. Energy Information Administration (EIA) Indexed Site

    Atlantic","New England" "Total U.S. Housing Units",111.1,20.6,15.1,5.5 "Indoor Lights Turned On During Summer" "Number of Lights Turned On" "Between 1 and 4 Hours per...

  3. "Table HC14.13 Lighting Usage Indicators by West Census Region...

    U.S. Energy Information Administration (EIA) Indexed Site

    icators",,,"Mountain","Pacific" "Total U.S. Housing Units",111.1,24.2,7.6,16.6 "Indoor Lights Turned On During Summer" "Number of Lights Turned On" "Between 1 and 4 Hours per...

  4. "Table HC13.13 Lighting Usage Indicators by South Census Region...

    U.S. Energy Information Administration (EIA) Indexed Site

    South Central" "Total U.S. Housing Units",111.1,40.7,21.7,6.9,12.1 "Indoor Lights Turned On During Summer" "Number of Lights Turned On" "Between 1 and 4 Hours per...

  5. "Table HC10.13 Lighting Usage Indicators by U.S. Census Region...

    U.S. Energy Information Administration (EIA) Indexed Site

    ,"Midwest","South","West" "Total U.S. Housing Units",111.1,20.6,25.6,40.7,24.2 "Indoor Lights Turned On During Summer" "Number of Lights Turned On" "Between 1 and 4 Hours per...

  6. Changes in neurotransmitter levels and proinflammatory cytokine mRNA expressions in the mice olfactory bulb following nanoparticle exposure

    SciTech Connect (OSTI)

    Tin-Tin-Win-Shwe [National Institute for Environmental Studies, 16-2 Onogawa, Tsukuba, Ibaraki 305-8506 (Japan)], E-mail: tin.tin.win.shwe@nies.go.jp; Mitsushima, Dai [Department of Physiology, Yokohama City University Graduate School of Medicine, 3-9 Fukuura, Kanazawaku, Yokohama 236-0004 (Japan); Yamamoto, Shoji; Fukushima, Atsushi [National Institute for Environmental Studies, 16-2 Onogawa, Tsukuba, Ibaraki 305-8506 (Japan); Funabashi, Toshiya [Department of Physiology, Yokohama City University Graduate School of Medicine, 3-9 Fukuura, Kanazawaku, Yokohama 236-0004 (Japan); Kobayashi, Takahiro; Fujimaki, Hidekazu [National Institute for Environmental Studies, 16-2 Onogawa, Tsukuba, Ibaraki 305-8506 (Japan)

    2008-01-15T23:59:59.000Z

    Recently, there have been increasing reports that nano-sized component of particulate matter can reach the brain and may be associated with neurodegenerative diseases. Previously, our laboratory has studied the effect of intranasal instillation of nano-sized carbon black (CB) (14 nm and 95 nm) on brain cytokine and chemokine mRNA expressions and found that 14-nm CB increased IL-1{beta}, TNF-{alpha}, CCL2 and CCL3 mRNA expressions in the olfactory bulb, not in the hippocampus of mice. To investigate the effect of a single administration of nanoparticles on neurotransmitters and proinflammatory cytokines in a mouse olfactory bulb, we performed in vivo microdialysis and real-time PCR methods. Ten-week-old male BALB/c mice were implanted with guide cannula in the right olfactory bulb and, 1 week later, were instilled vehicle or CB (14 nm, 250 {mu}g) intranasally. Six hours after the nanoparticle instillation, the mice were intraperitoneally injected with normal saline or 50 {mu}g of bacteria cell wall component lipoteichoic acid (LTA), which may potentiate CB-induced neurologic effect. Extracellular glutamate and glycine levels were significantly increased in the olfactory bulb of CB-instilled mice when compared with vehicle-instilled control mice. Moreover, we found that LTA further increased glutamate and glycine levels. However, no alteration of taurine and GABA levels was observed in the olfactory bulb of the same mice. We also detected immunological changes in the olfactory bulb 11 h after vehicle or CB instillation and found that IL-1{beta} mRNA expression was significantly increased in CB- and LTA-treated mice when compared with control group. However, TNF-{alpha} mRNA expression was increased significantly in CB- and saline-treated mice when compared with control group. These findings suggest that nanoparticle CB may modulate the extracellular amino acid neurotransmitter levels and proinflammatory cytokine IL-1 {beta} mRNA expressions synergistically with LTA in the mice olfactory bulb.

  7. Measurement of tool forces in diamond turning

    SciTech Connect (OSTI)

    Drescher, J.; Dow, T.A.

    1988-12-01T23:59:59.000Z

    A dynamometer has been designed and built to measure forces in diamond turning. The design includes a 3-component, piezoelectric transducer. Initial experiments with this dynamometer system included verification of its predicted dynamic characteristics as well as a detailed study of cutting parameters. Many cutting experiments have been conducted on OFHC Copper and 6061-T6 Aluminum. Tests have involved investigation of velocity effects, and the effects of depth and feedrate on tool forces. Velocity has been determined to have negligible effects between 4 and 21 m/s. Forces generally increase with increasing depth of cut. Increasing feedrate does not necessarily lead to higher forces. Results suggest that a simple model may not be sufficient to describe the forces produced in the diamond turning process.

  8. ARM - VAP Product - 10rlprofdep1turn

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadap DocumentationProductsmwravg DocumentationProductstoacessrlprofdep1turn Documentation Data

  9. ARM - VAP Product - 10rlprofmr1turn

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadap DocumentationProductsmwravg DocumentationProductstoacessrlprofdep1turn Documentation

  10. Estimated Savings from Turning Off Unnecessary Electrical Loads During Unoccupied Periods at the Langford Architecture Center

    E-Print Network [OSTI]

    Soebarto, V. I.; Haberl, J. S.; Degelman, L. O.

    1996-01-01T23:59:59.000Z

    in those studios during unoccupied hours. Turning off the lights on the third and fourth floor studios would reduce the electricity cost by $4,757 per year and the associated heating and cooling costs by an additional $583 for a total savings of $5...

  11. Ecosystem Component Characterization "Things don't turn up in this world until somebody turns them up."

    E-Print Network [OSTI]

    Pitt, Robert E.

    CHAPTER 6 Ecosystem Component Characterization "Things don't turn up in this world until somebody turns them up." James A. Garfield CONTENTS Overview

  12. Illinois Turning Landfill Trash into Future Cash

    Broader source: Energy.gov [DOE]

    Will County, Illinois officials yesterday formally broke ground on a new $7 million project (that includes $1 million of Energy Efficiency Conservation Block Grant funds) to turn methane gas from the Prairie View Landfill into electricity in a partnership with Waste Management. Will County will receive revenue from the sale of the gas created from decomposing garbage which will be harnessed and converted to generate 4.8 megawatts of green electrical power and used to power up to 8,000 homes. The future revenue generated from the sale of the gas and the sale of the electricity could reach $1 million annually.

  13. Turning Grass into Gas for Less

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron Spin Transition in2,EHSS A-Zand Analysis UtilitiesTurbulenceTurning

  14. Solar Decathlon Turns Ten | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreakingMayDepartment of Energy Ready,SmartEnergy Opening Ceremony andTurns

  15. DOE Turns 25 | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA groupTubahq.na.gov Office of theNuclearNanotechnologies HighAnnounces PlansTurns

  16. Turn Motors Off When Not in Use

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOriginEducationVideoStrategic|IndustrialCenterMarch 4; RSVP byof Energy TurbinesTurn Motors

  17. ARM - VAP Product - 10srlprofmr1turn

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa-Anomalous Radiative AbsorptionARMsrlprofmr1turn Documentation Data Management Facility

  18. Evaluation of machining dispersions for turning process

    E-Print Network [OSTI]

    Arnaud Lefebvre; Valery Wolff

    2008-03-03T23:59:59.000Z

    In this article we propose to extend the model of simulation of dispersions in turning based on the geometrical specifications. Our study is articulated around two trends of development: the first trend relates to the geometrical model. The geometrical model suggested must allow a follow-up of the geometry of the part during the simulation of machining. It is thus a question of carrying out a systematic treatment of the whole dimensioning and tolerancing process while being based on the principles of the \\DeltaL method. We also planned to integrate this type of specification in the model of simulation of machining suggested. It is more generally a question of extending the traditional model for better taking into account the multi axis specification of coaxiality and perpendicularity on the turned workpieces. The second trend of our study relates to the widening of the field of application of the model. We propose to extend the field of application of the model by taking into account the modifications of several parameters of the manufacturing process plans, likely to involve variations of dispersions.

  19. Visualization of nitric oxide production in the mouse main olfactory bulb by a cell-trappable copper(II) fluorescent probe

    E-Print Network [OSTI]

    McQuade, Lindsey E.

    We report the visualization of NO production using fluorescence in tissue slices of the mouse main olfactory bulb. This discovery was possible through the use of a novel, cell-trappable probe for intracellular nitric oxide ...

  20. Ecological and molecular investigation of wheat bulb fly (Delia coarctata, Fallén, Diptera: Anthomyiidae) for the advancement of population monitoring and control methodologies 

    E-Print Network [OSTI]

    Rogers, Craig David

    2012-06-22T23:59:59.000Z

    Wheat bulb fly (WBF) (Delia coarctata, Fallén, Diptera: Anthomyiidae) is a pest of commercial importance in cereal crops. Control is dependent on organophosphates some of which are restricted in the UK, while current ...

  1. Superposed Coherent and Squeezed Light

    E-Print Network [OSTI]

    Fesseha Kassahun

    2012-01-18T23:59:59.000Z

    We first calculate the mean photon number and quadrature variance of superposed coherent and squeezed light, following a procedure of analysis based on combining the Hamiltonians and using the usual definition for the quadrature variance of superposed light beams. This procedure of analysis leads to physically unjustifiable mean photon number of the coherent light and quadrature variance of the superposed light. We then determine both of these properties employing a procedure of analysis based on superposing the Q functions and applying a slightly modified definition for the quadrature variance of a pair of superposed light beams. We find the expected mean photon number of the coherent light and the quadrature variance of the superposed light. Moreover, the quadrature squeezing of the superposed output light turns out to be equal to that of the superposed cavity light.

  2. The effect of a synthetic cytokinin, 6-benzylaminopurine, and light quality on Ficus benjamina under low light intensities

    E-Print Network [OSTI]

    Meadows, Sylvia Elise

    1979-01-01T23:59:59.000Z

    that 1, 100 ft-c of tungsten light would give a higher dry weight gain than 1, 000 ft-c fluorescent, 1, 100 ft-c fluorescent plus tungsten, or 1, 800 ft-c of fluorescent plus tungsten plus mercury. In beans Leiser et. al, found that tungsten gave a... higher dry weight gain than fluorescent plus tungsten plus mercury or fluorescent plus mercury, or fluor scent alone (23). Incandescent bulbs are high in infrared irradiation compared to fluorescent light sources, and it has been found that infrared 1r...

  3. Predictive factors for erectile dysfunction in men with prostate cancer after brachytherapy: Is dose to the penile bulb important?

    SciTech Connect (OSTI)

    Macdonald, A. Graham [Department of Radiation Oncology, Vancouver Cancer Centre, BC Cancer Agency, Vancouver, BC (Canada)]. E-mail: gmacdonald@easynet.co.uk; Keyes, Mira [Department of Radiation Oncology, Vancouver Cancer Centre, BC Cancer Agency, Vancouver, BC (Canada); Kruk, Alexandra [Department of Radiation Therapy, Vancouver Cancer Centre, BC Cancer Agency, Vancouver, BC (Canada); Duncan, Graeme [Department of Radiation Oncology, Vancouver Cancer Centre, BC Cancer Agency, Vancouver, BC (Canada); Moravan, Veronika [Population and Preventive Oncology, BC Cancer Agency, Vancouver, BC (Canada); Morris, W. James [Department of Radiation Oncology, Vancouver Cancer Centre, BC Cancer Agency, Vancouver, BC (Canada)

    2005-09-01T23:59:59.000Z

    Purpose: To determine predictive factors for postimplant erectile dysfunction (ED) in a cohort of patients, according to prospectively collected data; specifically, to assess the impact of penile bulb volume and D50 and D95 (dose covering 50% and 95% of the penile bulb volume, respectively) on ED. Methods and Materials: Three hundred forty-two patients were identified who were potent before implant and who had at least 2 years' follow-up. Patient, tumor, treatment, and dosimetric data were collected on all patients. Postimplant ED was defined according to both physician-documented and patient-documented outcome data. Binary logistic regression analysis was used to create multivariable models of predictors for ED at 1, 2, and 3 years after implant. Results: Physician-documented rates of ED were 57%, 48%, and 38% at 1, 2, and 3 years after implant, respectively. Patient-documented rates of ED were 70% and 66% at 1 and 2 years, respectively. Multivariable analyses revealed age and degree of preimplant erectile function to be consistently significant predictors of ED. Use of hormones was significant at the 1-year physician-documented ED endpoint but not thereafter, in keeping with the time course of testosterone recovery. Penile bulb volume, D50, and D95 were not found to be predictive for ED at any time point, in contrast to previous studies. In addition, planning ultrasound target volume, number of needles, and institutional case sequence number were significant predictors of ED at various time points, consistent with a traumatic etiology of ED. Conclusions: We found no evidence to support penile bulb dosimetry as an independent predictive factor for ED after implant, using physician-documented or patient-documented outcomes.

  4. Efficient photoassociation with a slowly-turned-on and rapidly-turned-off laser field

    SciTech Connect (OSTI)

    Zhang Wei; Huang Yin; Xie Ting; Wang Gaoren; Cong Shulin [School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian 116024 (China)

    2010-12-15T23:59:59.000Z

    We present a theoretical scheme used for investigating the formation of ultracold molecules via photoassociation with a slowly-turned-on and rapidly-turned-off (STRT) laser pulse, with Cs{sub 2} as an example. As compared with an unshaped laser pulse, this kind of shaped laser pulse has a prominent advantage by which we can prevent the associated molecules from returning to the initial scattering state. Numerical calculations show that an efficient photoassociation can be realized with the STRT laser pulse, which is available in the current experiment as an optical tool.

  5. Metacapacitors for LED Lighting: Metacapacitors

    SciTech Connect (OSTI)

    None

    2010-09-02T23:59:59.000Z

    ADEPT Project: The CUNY Energy Institute is developing less expensive, more efficient, smaller, and longer-lasting power converters for energy-efficient LED lights. LEDs produce light more efficiently than incandescent lights and last significantly longer than compact fluorescent bulbs, but they require more sophisticated power converter technology, which increases their cost. LEDs need more sophisticated converters because they require a different type of power (low voltage direct current, or DC) than what's generally supplied by power outlets. The CUNY Energy Institute is developing sophisticated power converters for LEDs that contain capacitors made from new, nanoscale materials. Capacitors are electrical components that are used to store energy. CUNY's unique capacitors are configured with advanced power circuits to more efficiently control and convert power to the LED lighting source. They also eliminate the need for large magnetic components, instead relying on networks of capacitors that can be easily printed on plastic substrate. CUNY's prototype LED power converter already meets DOE's 2020 projections for the energy efficiency of LED power converters.

  6. Turning Algae into Energy in New Mexico

    SciTech Connect (OSTI)

    Sayre, Richard; Olivares, Jose; Lammers, Peter

    2013-07-29T23:59:59.000Z

    Los Alamos National Laboratory, as part of the New Mexico Consortium - comprised of New Mexico's major research universities, the Lab, and key industry partners - is conducting research into using algae as a feed stock for a renewable source of fuels, and other products. There are hundreds of thousands of different algae species on Earth. They account for approximately half of the net photosynthesis on the planet, yet they have not been used in any kind of a large scale by humanity, with just a few exceptions. And yet, the biomass is easy to transform into useful products, including fuels, and they contain many other natural products that have high value. In this video Los Alamos and New Mexico State University scientists outline the opportunities and challenges of using science to turn algae into energy.

  7. Turning Algae into Energy in New Mexico

    ScienceCinema (OSTI)

    Sayre, Richard; Olivares, Jose; Lammers, Peter

    2014-06-24T23:59:59.000Z

    Los Alamos National Laboratory, as part of the New Mexico Consortium - comprised of New Mexico's major research universities, the Lab, and key industry partners - is conducting research into using algae as a feed stock for a renewable source of fuels, and other products. There are hundreds of thousands of different algae species on Earth. They account for approximately half of the net photosynthesis on the planet, yet they have not been used in any kind of a large scale by humanity, with just a few exceptions. And yet, the biomass is easy to transform into useful products, including fuels, and they contain many other natural products that have high value. In this video Los Alamos and New Mexico State University scientists outline the opportunities and challenges of using science to turn algae into energy.

  8. Electrodeposited coatings for diamond turning applications

    SciTech Connect (OSTI)

    Mayer, A.; Bramlett, R.D.; Day, R.D. (Los Alamos National Lab., NM (USA)); Evans, C.J.; Polvani, R.S. (National Inst. of Standards and Technology, Gaithersburg, MD (USA))

    1991-01-01T23:59:59.000Z

    Electrodeposited coatings are attractive for precision machining operations because thick coatings can be economically applied, with good adhesion, to a variety of substrates. Approximately 20 pure metals and a large number of alloys can be deposited from aqueous solutions. Fused salt and organic solvent electrolytes can be used to lengthen the list of metals that can be electrodeposited. However, both the choice of the metallic coating and the control of the plating process are critical for success in precision finishing of electrodeposited coatings. Some preliminary results at the National Institute of Standards and Technology and at the Lawrence Livermore National Laboratory suggest that electrodeposited nickel-phosphorus alloys are excellent coatings for single point diamond turning from the standpoint of material properties and low tool wear. Electrodeposited aluminum and aluminum alloy coatings also merit consideration for precision finishing where weight is an important factor. 10 refs., 6 figs.

  9. "Turn-Key" Open Source Software Solutions for Energy Management...

    Energy Savers [EERE]

    "Turn-Key" Open Source Software Solutions for Energy Management of Small to Medium Sized Buildings (DE-FOA-0000822) "Turn-Key" Open Source Software Solutions for Energy Management...

  10. WHEN THE BLUE-GREEN WATERS TURN RED

    E-Print Network [OSTI]

    WHEN THE BLUE-GREEN WATERS TURN RED Historical Flooding in Havasu Creek, Arizona U.S. GEOLOGICAL OF RECLAMATION #12;WHEN THE BLUE-GREEN WATERS TURN RED Historical Flooding in Havasu Creek, Arizona By THEODORE S

  11. Turning Waste Into Fuel: How the INEOS Biorefinery Is Changing...

    Office of Environmental Management (EM)

    Turning Waste Into Fuel: How the INEOS Biorefinery Is Changing the Clean Energy Game Turning Waste Into Fuel: How the INEOS Biorefinery Is Changing the Clean Energy Game February...

  12. Turn Your Key, Be Idle Free | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Turn Your Key, Be Idle Free Turn Your Key, Be Idle Free April 13, 2010 - 7:30am Addthis Shannon Brescher Shea Communications Manager, Clean Cities Program What activity wastes...

  13. High voltage ignition of high pressure microwave powered UV light sources

    SciTech Connect (OSTI)

    Frank, J.D.; Cekic, M.; Wood, C.H. [Fusion U.V. Curing Systems Corp., Gaithersburg, MD (United States)

    1997-12-31T23:59:59.000Z

    Industrial microwave powered (electrodeless) light sources have been limited to quiescent pressures of {approximately}300 Torr of buffer gas and metal-halide fills. The predominant reason for such restrictions has been the inability to microwave ignite the plasma due to the collisionality of higher pressure fills and/or the electronegativity of halide bulb chemistries. Commercially interesting bulb fills require electric fields for ionization that are often large multiples of the breakdown voltage for air. Many auxiliary ignition methods are evaluated for efficiency and practicality before the choice of a high-voltage system with a retractable external electrode. The scheme utilizes a high voltage pulse power supply and a novel field emission source. Acting together they create localized condition of pressure reduction and high free electron density. This allows the normal microwave fields to drive this small region into avalanche, ignite the bulb, and heat the plasma to its operating point (T{sub e} {approx} 0.5 eV). This process is currently being used in a new generation of lamps, which are using multi-atmospheric excimer laser chemistries and pressure and constituent enhanced metal-halide systems. At the present time, production prototypes produce over 900 W of radiation in a 30 nm band, centered at 308 nm. Similarly, these prototypes when loaded with metal-halide bulb fills produce over 1 kW of radiation in 30 nm wide bands, centered about the wavelength of interest.

  14. Modeling the Capacity of Left-Turn and Through Movement Considering Left-Turn Blockage and Spillback at Signalized Intersection with Short Left-Turn Bay

    E-Print Network [OSTI]

    Cho, Kyoung Min

    2010-10-12T23:59:59.000Z

    of grade separation that can do as much as signals do (Roess, Prassas, and McShane, 2004). Left-turns are the most difficult and complex procedures to deal with at a signalized intersection. There are several different ways of left- turns. Different... of the intersection according to several elements such as left-turning and opposing volume related to traffic operation(Roess et al., 2004). Roger et al. suggested general guidelines for selecting more suitable left-turn sequence in each intersection with various...

  15. Evaluation of Blue Confirmation Lights on Red Light Running at Signalized Intersections in Lawrence, Kansas: A Case Study

    E-Print Network [OSTI]

    Boakye, Kwaku Frimpong

    2014-08-31T23:59:59.000Z

    of Lawrence installed confirmation lights at six left-turn approaches of two signalized intersections (treatment sites) where RLR was prevalent. This study was conducted to evaluate the effectiveness of the confirmation lights. RLR violation data were...

  16. Contouring Variability of the Penile Bulb on CT Images: Quantitative Assessment Using a Generalized Concordance Index

    SciTech Connect (OSTI)

    Carillo, Viviana [Department of Medical Physics, San Raffaele Scientific Institute, Milano (Italy)] [Department of Medical Physics, San Raffaele Scientific Institute, Milano (Italy); Cozzarini, Cesare [Department of Radiotherapy, San Raffaele Scientific Institute, Milano (Italy)] [Department of Radiotherapy, San Raffaele Scientific Institute, Milano (Italy); Perna, Lucia; Calandra, Mauro [Department of Medical Physics, San Raffaele Scientific Institute, Milano (Italy)] [Department of Medical Physics, San Raffaele Scientific Institute, Milano (Italy); Gianolini, Stefano [Medical Software Solutions GmbH, Hagendorn (Switzerland)] [Medical Software Solutions GmbH, Hagendorn (Switzerland); Rancati, Tiziana [Prostate Cancer Program, IRCCS National Institute of Cancer, Milano (Italy)] [Prostate Cancer Program, IRCCS National Institute of Cancer, Milano (Italy); Spinelli, Antonello Enrico [Department of Medical Physics, San Raffaele Scientific Institute, Milano (Italy)] [Department of Medical Physics, San Raffaele Scientific Institute, Milano (Italy); Vavassori, Vittorio [Department of Radiotherapy, Cliniche Gavazzeni Humanitas, Bergamo (Italy)] [Department of Radiotherapy, Cliniche Gavazzeni Humanitas, Bergamo (Italy); Villa, Sergio [Department of Radiotherapy 1, IRCCS National Institute of Cancer, Milano (Italy)] [Department of Radiotherapy 1, IRCCS National Institute of Cancer, Milano (Italy); Valdagni, Riccardo [Prostate Cancer Program, IRCCS National Institute of Cancer, Milano (Italy) [Prostate Cancer Program, IRCCS National Institute of Cancer, Milano (Italy); Department of Radiotherapy 1, IRCCS National Institute of Cancer, Milano (Italy); Fiorino, Claudio, E-mail: fiorino.claudio@hsr.it [Department of Medical Physics, San Raffaele Scientific Institute, Milano (Italy)] [Department of Medical Physics, San Raffaele Scientific Institute, Milano (Italy)

    2012-11-01T23:59:59.000Z

    Purpose: Within a multicenter study (DUE-01) focused on the search of predictors of erectile dysfunction and urinary toxicity after radiotherapy for prostate cancer, a dummy run exercise on penile bulb (PB) contouring on computed tomography (CT) images was carried out. The aim of this study was to quantitatively assess interobserver contouring variability by the application of the generalized DICE index. Methods and Materials: Fifteen physicians from different Institutes drew the PB on CT images of 10 patients. The spread of DICE values was used to objectively select those observers who significantly disagreed with the others. The analyses were performed with a dedicated module in the VODCA software package. Results: DICE values were found to significantly change among observers and patients. The mean DICE value was 0.67, ranging between 0.43 and 0.80. The statistics of DICE coefficients identified 4 of 15 observers who systematically showed a value below the average (p value range, 0.013 - 0.059): Mean DICE values were 0.62 for the 4 'bad' observers compared to 0.69 of the 11 'good' observers. For all bad observers, the main cause of the disagreement was identified. Average DICE values were significantly worse from the average in 2 of 10 patients (0.60 vs. 0.70, p < 0.05) because of the limited visibility of the PB. Excluding the bad observers and the 'bad' patients,' the mean DICE value increased from 0.67 to 0.70; interobserver variability, expressed in terms of standard deviation of DICE spread, was also reduced. Conclusions: The obtained values of DICE around 0.7 shows an acceptable agreement, considered the small dimension of the PB. Additional strategies to improve this agreement are under consideration and include an additional tutorial of the so-called bad observers with a recontouring procedure, or the recontouring by a single observer of the PB for all patients included in the DUE-01 study.

  17. Turning on the Fan and Turning off the A/C | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergyTransportation WorkDecember 28, 2004 PartTurning on the Fan

  18. Marvell NanoLab Member login Lab Manual Contents MercuryWeb Berkeley Microlab Chapter 4.34

    E-Print Network [OSTI]

    Healy, Kevin Edward

    irradiates ultraviolet (UV) light by means of an electrodeless, sealed bulb. High voltage DC power is converted to microwave energy by two magnetrons, which in turn produce a high-temperature plasma inside the bulb. This plasma then re-radiates the energy in the form of infrared, visible, and ultraviolet

  19. Automatic Mechetronic Wheel Light Device

    DOE Patents [OSTI]

    Khan, Mohammed John Fitzgerald (Silver Spring, MD)

    2004-09-14T23:59:59.000Z

    A wheel lighting device for illuminating a wheel of a vehicle to increase safety and enhance aesthetics. The device produces the appearance of a "ring of light" on a vehicle's wheels as the vehicle moves. The "ring of light" can automatically change in color and/or brightness according to a vehicle's speed, acceleration, jerk, selection of transmission gears, and/or engine speed. The device provides auxiliary indicator lights by producing light in conjunction with a vehicle's turn signals, hazard lights, alarm systems, and etc. The device comprises a combination of mechanical and electronic components and can be placed on the outer or inner surface of a wheel or made integral to a wheel or wheel cover. The device can be configured for all vehicle types, and is electrically powered by a vehicle's electrical system and/or battery.

  20. Local prediction of turning points of oscillating time series

    E-Print Network [OSTI]

    D. Kugiumtzis

    2008-08-06T23:59:59.000Z

    For oscillating time series, the prediction is often focused on the turning points. In order to predict the turning point magnitudes and times it is proposed to form the state space reconstruction only from the turning points and modify the local (nearest neighbor) model accordingly. The model on turning points gives optimal prediction at a lower dimensional state space than the optimal local model applied directly on the oscillating time series and is thus computationally more efficient. Monte Carlo simulations on different oscillating nonlinear systems showed that it gives better predictions of turning points and this is confirmed also for the time series of annual sunspots and total stress in a plastic deformation experiment.

  1. Smart lighting: New Roles for Light

    E-Print Network [OSTI]

    Salama, Khaled

    Smart lighting: New Roles for Light in the Solid State Lighting World Robert F. Karlicek, Jr. Director, Smart Lighting Engineering Research Center Professor, Electrical, Systems and Computer Lighting · What is Smart Lighting · Technology Barriers to Smart Lighting · Visible Light Communications

  2. Commercial Lighting

    Broader source: Energy.gov [DOE]

    Commercial lighting accounts for more than 20 percent of total commercial building energy use. The Energy Department works to reduce lighting energy use through research and deployment.

  3. Turning Back Time: The Application of Predictive Technology to Big Data 1 Turning Back Time: The Application of Predictive

    E-Print Network [OSTI]

    Oard, Doug

    " to lower the cost of discovery in litigation [1]. This technology aims to reduce costs in a number of legal effective it can be in reducing litigation costs. For example that it is a very expensive technology usefulTurning Back Time: The Application of Predictive Technology to Big Data 1 Turning Back Time

  4. Determination of the 1%, 2.5%, and 5% occurrences of extreme dew-point temperatures and mean coincident dry-bulb temperatures

    SciTech Connect (OSTI)

    Colliver, D.G.; Zhang, H.; Gates, R.; Priddy, T. [Univ. of Kentucky, Lexington, KY (United States)

    1995-12-31T23:59:59.000Z

    The purpose of ASHRAE Research Project RP-754 was to find the outdoor design occurrences of extreme dew-point temperature and the corresponding mean coincident dry-bulb temperature for a large number of locations in North America. Thirty years of data (1961--1990) were used for 239 US locations, and the last 30 years of hourly data available (typically 1960--1989) were used for 143 Canadian locations. Tables are given that present the 1%, 2.5%, and 5% extreme summertime occurrences of dew-point temperatures and corresponding values of humidity ratios and the mean coincident dry-bulb (MCDB) temperature for the period of record. A map that shows the general geographical trends for the spatial distribution of the design dew-point values is also presented. Comparisons are provided between interpolation techniques to fill missing data, different weather data sets, and methods of calculating different definitions of extreme design and mean coincident data. Results are also reported of a comparison to evaluate the difference in humidity ratios between that calculated from the extreme design dry-bulb temperature and mean coincident wet-bulb temperature, versus that calculated from the extreme design dew-point temperature and the MCDB. It was found that the method of extreme dew point with MCDB had a higher humidity ratio that was on the average (for the 1% case and the 239 US locations) 0.00564 lb/lb larger than the humidity ratio found with the other method.

  5. Diamond turning of Si and Ge single crystals

    SciTech Connect (OSTI)

    Blake, P.; Scattergood, R.O.

    1988-12-01T23:59:59.000Z

    Single-point diamond turning studies have been completed on Si and Ge crystals. A new process model was developed for diamond turning which is based on a critical depth of cut for plastic flow-to-brittle fracture transitions. This concept, when combined with the actual machining geometry for single-point turning, predicts that {open_quotes}ductile{close_quotes} machining is a combined action of plasticity and fracture. Interrupted cutting experiments also provide a meant to directly measure the critical depth parameter for given machining conditions.

  6. Observation of diamond turned OFHC copper using Scanning Tunneling Microscopy

    SciTech Connect (OSTI)

    Grigg, D.A.; Russell, P.E.; Dow, T.A.

    1988-12-01T23:59:59.000Z

    Diamond turned OFHC copper samples have been observed within the past few months using the Scanning Tunneling Microscope. Initial results have shown evidence of artifacts which may be used to better understand the diamond turning process. The STM`s high resolution capability and three dimensional data representation allows observation and study of surface features unobtainable with conventional profilometry systems. Also, the STM offers a better quantitative means by which to analyze surface structures than the SEM. This paper discusses findings on several diamond turned OFHC copper samples having different cutting conditions. Each sample has been cross referenced using STM and SEM.

  7. Electroless nickel: an important coating for diamond turning applications

    SciTech Connect (OSTI)

    Dini, J.W.

    1980-09-24T23:59:59.000Z

    Diamond turning is the use of a single-point diamond tool on a precision lathe under very precisely controlled machine and environmental conditions to fabricate finished components. With a machine presently available at LLNL a part accuracy between 0.05 and 1.0 ..mu..m (2 and 40 millionths of an inch) is obtainable. Coatings offer significant advantages for diamond turning applications inasmuch as they can be applied to lightweight substrates such as aluminum or beryllium. One of the most used coatings for diamond turning applications is electroless nickel. Purpose of this paper is to document case histories of such applications and suggest areas for future work.

  8. Breaking the symmetries of the bulb model in two-dimensional self-induced supernova neutrino flavor conversions

    E-Print Network [OSTI]

    Mirizzi, Alessandro

    2015-01-01T23:59:59.000Z

    Self-induced flavor conversions of supernova (SN) neutrinos have been characterized in the spherically symmetric "bulb model", reducing the neutrino evolution to a one dimensional problem along a radial direction. We lift this assumption, presenting a two-dimensional model where neutrinos are launched from a spherical neutrino-sphere with many zenithal angles and two azimuthal angles. We also assume that self-induced conversions are not suppressed by large matter effects. In this situation we find that self-interacting neutrinos spontaneously break axial and spherical symmetries. As a result the flavor content and the lepton number of the neutrino gas would acquire seizable direction-dependent variations, breaking the coherent behavior found in the spherically symmetric case. This finding would suggest that the previous results of the self-induced flavor evolution obtained in one-dimensional models should be critically re-examined.

  9. Instrument uncertainty effect on calculation of absolute humidity using dewpoint, wet-bulb, and relative humidity sensors

    SciTech Connect (OSTI)

    Slayzak, S.J.; Ryan, J.P.

    1998-04-01T23:59:59.000Z

    As part of the US Department of Energy`s Advanced Desiccant Technology Program, the National Renewable Energy Laboratory (NREL) is characterizing the state-of-the-art in desiccant dehumidifiers, the key component of desiccant cooling systems. The experimental data will provide industry and end users with independent performance evaluation and help researchers assess the energy savings potential of the technology. Accurate determination of humidity ratio is critical to this work and an understanding of the capabilities of the available instrumentation is central to its proper application. This paper compares the minimum theoretical random error in humidity ratio calculation for three common measurement methods to give a sense of the relative maximum accuracy possible for each method assuming systematic errors can be made negligible. A series of experiments conducted also illustrate the capabilities of relative humidity sensors as compared to dewpoint sensors in measuring the grain depression of desiccant dehumidifiers. These tests support the results of the uncertainty analysis. At generally available instrument accuracies, uncertainty in calculated humidity ratio for dewpoint sensors is determined to be constant at approximately 2%. Wet-bulb sensors range between 2% and 6% above 10 g/kg (4%--15% below), and relative humidity sensors vary between 4% above 90% rh and 15% at 20% rh. Below 20% rh, uncertainty for rh sensors increases dramatically. Highest currently attainable accuracies bring dewpoint instruments down to 1% uncertainty, wet bulb to a range of 1%--3% above 10 g/kg (1.5%--8% below), and rh sensors between 1% and 5%.

  10. The aesthetic turn in the face of nihilism 

    E-Print Network [OSTI]

    Craig, Benjamin Taylor

    2008-10-10T23:59:59.000Z

    This thesis outlines one's overcoming of nihilism by consulting two figures, Martin Heidegger and John Dewey. Each thinker holds a pivotal role for art, such that, a turn to the aesthetic allows the individual to overcome this nihilistic age. I...

  11. Energy Efficiency Through Lighting Upgrades

    SciTech Connect (OSTI)

    Kara Berst; Maria Howeth

    2010-06-01T23:59:59.000Z

    Lighting upgrades including neon to LED, incandescent to CFL's and T-12 to T-8 and T-5's were completed through this grant. A total of 16 Chickasaw nation facilities decreased their carbon footprint because of these grant funds. Calculations used were based on comparing the energy usage from the previous year�¢����s average and the current energy usage. For facilities without a full year's set of energy bills, the month after installation was compared to the same month from the previous year. Overall, the effect the lighting change-outs had for the gaming centers and casinos far exceeded expectations. For the Madill Gaming Center; both an interior and exterior upgrade was performed which resulted in a 31% decrease in energy consumption. This same reduction was seen in every facility that participated in the grant. Just by simply changing out light bulbs to newer energy efficient equivalents, a decrease in energy usage can be achieved and this was validated by the return on investment seen at Chickasaw Nation facilities. Along with the technical project tasks were awareness sessions presented at Chickasaw Head Starts. The positive message of environmental stewardship was passed down to head start students and passed along to Chickasaw employees. Excitement was created in those that learned what they could do to help reduce their energy bills and many followed through and took the idea home. For a fairy low cost, the general public can also use this technique to lower their energy consumption both at home and at work. Although the idea behind the project was somewhat simple, true benefits have been gained through environmental awareness and reductions of energy costs.

  12. Estimate of federal relighting potential and demand for efficient lighting products

    SciTech Connect (OSTI)

    Shankle, S.A.; Dirks, J.A.; Elliott, D.B.; Richman, E.E.; Grover, S.E.

    1993-11-01T23:59:59.000Z

    The increasing level of electric utility rebates for energy-efficient lighting retrofits has recently prompted concern over the adequacy of the market supply of energy-efficient lighting products (Energy User News 1991). In support of the U.S. Department of Energy`s Federal Energy Management Program, Pacific Northwest Laboratory (PNL) has developed an estimate of the total potential for energy-efficient lighting retrofits in federally owned buildings. This estimate can be used to address the issue of the impact of federal relighting projects on the supply of energy-efficient lighting products. The estimate was developed in 1992, using 1991 data. Any investments in energy-efficient lighting products that occurred in 1992 will reduce the potential estimated here. This analysis proceeds by estimating the existing stock of lighting fixtures in federally owned buildings. The lighting technology screening matrix is then used to determine the minimum life-cycle cost retrofit for each type of existing lighting fixture. Estimates of the existing stock are developed for (1) four types of fluorescent lighting fixtures (2-, 3-, and 4-lamp, F40 4-foot fixtures, and 2-lamp, F96 8-foot fixtures, all with standard magnetic ballasts); (2) one type of incandescent fixture (a 75-watt single bulb fixture); and (3) one type of exit sign (containing two 20-watt incandescent bulbs). Estimates of the existing stock of lighting fixtures in federally owned buildings, estimates of the total potential demand for energy-efficient lighting products if all cost-effective retrofits were undertaken immediately, and total potential annual energy savings (in MWh and dollars), the total investment required to obtain the energy savings and the present value of the efficiency investment, are presented.

  13. Light Properties Light travels at the speed of light `c'

    E-Print Network [OSTI]

    Mojzsis, Stephen J.

    LIGHT!! #12;Light Properties Light travels at the speed of light `c' C = 3 x 108 m/s Or 190,000 miles/second!! Light could travel around the world about 8 times in one second #12;What is light?? Light is a "wave packet" A photon is a "light particle" #12;Electromagnetic Radiation and You Light is sometimes

  14. Portable lamp with dynamically controlled lighting distribution

    DOE Patents [OSTI]

    Siminovitch, Michael J. (Pinole, CA); Page, Erik R. (Berkeley, CA)

    2001-01-01T23:59:59.000Z

    A double lamp table or floor lamp lighting system has a pair of compact fluorescent lamps (CFLs) arranged vertically with a reflective septum in between. By selectively turning on one or both of the CFLs, down lighting, up lighting, or both up and down lighting is produced. The control system can also vary the light intensity from each CFL. The reflective septum insures that almost all the light produced by each lamp will be directed into the desired light distribution pattern which is selected and easily changed by the user. Planar compact fluorescent lamps, e.g. circular CFLs, particularly oriented horizontally, are preferable. CFLs provide energy efficiency. The lighting system may be designed for the home, hospitality, office or other environments.

  15. Basic Research Needs for Solid-State Lighting. Report of the Basic Energy Sciences Workshop on Solid-State Lighting, May 22-24, 2006

    SciTech Connect (OSTI)

    Phillips, J. M.; Burrows, P. E.; Davis, R. F.; Simmons, J. A.; Malliaras, G. G.; So, F.; Misewich, J.A.; Nurmikko, A. V.; Smith, D. L.; Tsao, J. Y.; Kung, H.; Crawford, M. H.; Coltrin, M. E.; Fitzsimmons, T. J.; Kini, A.; Ashton, C.; Herndon, B.; Kitts, S.; Shapard, L.; Brittenham, P. W.; Vittitow, M. P.

    2006-05-24T23:59:59.000Z

    The workshop participants enthusiastically concluded that the time is ripe for new fundamental science to beget a revolution in lighting technology. SSL sources based on organic and inorganic materials have reached a level of efficiency where it is possible to envision their use for general illumination. The research areas articulated in this report are targeted to enable disruptive advances in SSL performance and realization of this dream. Broad penetration of SSL technology into the mass lighting market, accompanied by vast savings in energy usage, requires nothing less. These new ?good ideas? will be represented not by light bulbs, but by an entirely new lighting technology for the 21st century and a bright, energy-efficient future indeed.

  16. Smart Lighting Controller!! Smart lighting!

    E-Print Network [OSTI]

    Anderson, Betty Lise

    1! Smart Lighting Controller!! #12;2! Smart lighting! No need to spend energy lighting the room if://blogs.stthomas.edu/realestate/2011/01/24/residential-real-estate-professionals-how-do-you- develop feedback! There is a connection between the output and the input! Therefore forces inputs to same voltage

  17. New Lighting Fixtures: Combining Creativity and Style with Energy Efficiency

    SciTech Connect (OSTI)

    Gordon, Kelly L.; Foster, Rebecca; McGowan, Terry

    2004-10-01T23:59:59.000Z

    This article for a building trade magazine describes a national design competition for energy efficient lighting sponsored by the U.S. Department of Energy, the American Lighting Association, and the Consortium for Energy Efficiency, with winners announced at ALA's Annual Conference May 14, 2004, in Tucson. The Lighting for Tomorrow competition was the first national lighting fixture design competition focusing on energy-efficient residential lighting. The competition invited fixture manufacturers and designers to come up with beautiful, functional lighting fixtures that also happen to be energy efficient. Fixtures were required to use a ''dedicated'' energy-efficient light source, such as a pin-based fluorescent lamp that cannot be replaced with a screw-in incandescent bulb. Fixtures also had to meet a minimum energy efficiency level that eliminated use of incandescent and halogen lamps, leaving the door open only to fluorescent sources and LEDs. More than 150 paper designs were submitted in the first phase of the competition, in 2003. Of those, 24 finalists were invited to submit working prototypes in 2004, and the winners were announced in May. The Grand Prize of $10,000 went to American Fluorescent of Waukegan, Illinois, for its ''Salem'' chandelier. Some winning fixtures are already available through Lowe's Home Improvement Centers.

  18. MATH 56A SPRING 2008 STOCHASTIC PROCESSES

    E-Print Network [OSTI]

    Igusa, Kiyoshi

    that it starts at the end of the previous process). I used the example of a light bulb. You put a light bulb replaced by a new bulb. Each bulb is independent of the previous one. Some numbers associated considered three kinds of light bulbs: (1) The guaranteed light bulb which will last exactly 1000 hours. (2

  19. MATH 56A SPRING 2008 STOCHASTIC PROCESSES

    E-Print Network [OSTI]

    Igusa, Kiyoshi

    at the end of the previous process). I used the example of a light bulb. You put a light bulb into a socket by a new bulb. Each bulb is independent of the previous one. Some numbers associated to this process are kinds of light bulbs: (1) The guaranteed light bulb which will last exactly 1000 hours. (2) The Poisson

  20. STAT 472 F14 Chapter 4 Homework.pdf

    E-Print Network [OSTI]

    Owner

    2014-09-30T23:59:59.000Z

    Sep 30, 2014 ... The hotel has 10,000 light bulbs. The light bulbs are all new. If a replacement bulb burns out, it too will be replaced with a new bulb. You are ...

  1. Copyright 2009 IBM Global Business Services Turning Green into Gold

    E-Print Network [OSTI]

    Copyright 2009 IBM Global Business Services 1 Turning Green into Gold Are Supply Chain Cost: In a market characterized by volatile energy costs and other rising supply chain costs, cost containment IBM survey, a majority of Supply Chain Executives identified cost containment as a continuing

  2. Being Interactive oogle's popularity has turned link analysis

    E-Print Network [OSTI]

    Being Interactive Deep Web Structure G oogle's popularity has turned link analysis into a major the user has specialized information needs. DeepWeb Our current understanding of Web structure is based the so-called surface Web, which consists, loosely speaking, of interlinked HTML pages. The deep Web

  3. Microbes turn mud into electricity By Paula Hartman Cohen

    E-Print Network [OSTI]

    Lovley, Derek

    compounds, such as toluene, to electricity. Lovley says this suggests that some Geobacters can be usedMicrobes turn mud into electricity By Paula Hartman Cohen News Office staff microorganisms can transform organic matter commonly found at the bottom of the ocean into electrical energy

  4. Compost 101Turn this year's trash into next year's treasure

    E-Print Network [OSTI]

    Hutcheon, James M.

    Compost 101Turn this year's trash into next year's treasure Filling and Maintaining Compost Georgia://ceps.georgiasouthern.edu/garden This brochure is funded in part by a grant from a Museums for America Grant. Types of Composting Bins To fill your compost bin, alternate brown and green materials. Keep in mind that the ideal ratio is three

  5. 1. Recycle all bottles and cans 2. Recycle all personal electronics

    E-Print Network [OSTI]

    Howitt, Ivan

    as possible ENERGY CONSERVATION 6. Turn off the lights when not in use 7. Turn off your computer when. They provide air filters 24. Use energy efficient light bulbs 25. Buy supplies locally 26. Select efficient reusable grocery bags when shopping 4. Buy things with recycled material in them 5. Reduce waste as much

  6. Cerenkov Light

    ScienceCinema (OSTI)

    Slifer, Karl

    2014-05-22T23:59:59.000Z

    The bright blue glow from nuclear reactors is Cerenkov light. Karl Slifer describes how nuclear physicists can use this phenomenon to study the nucleus of the atom.

  7. Cerenkov Light

    SciTech Connect (OSTI)

    Slifer, Karl

    2013-06-13T23:59:59.000Z

    The bright blue glow from nuclear reactors is Cerenkov light. Karl Slifer describes how nuclear physicists can use this phenomenon to study the nucleus of the atom.

  8. Lighting Renovations

    Broader source: Energy.gov [DOE]

    When undertaking a lighting renovation in a Federal building, daylighting is the primary renewable energy opportunity. Photovoltaics (PV) also present an excellent opportunity. While this guide...

  9. There Is No Correlation Between Erectile Dysfunction and Dose to Penile Bulb and Neurovascular Bundles Following Real-Time Low-Dose-Rate Prostate Brachytherapy

    SciTech Connect (OSTI)

    Solan, Amy N. [Department of Radiation Oncology, Mount Sinai School of Medicine, New York, NY (United States)], E-mail: amy.solan@mountsinai.org; Cesaretti, Jamie A. [Department of Radiation Oncology, Mount Sinai School of Medicine, New York, NY (United States); Stone, Nelson N. [Department of Urology, Mount Sinai School of Medicine, New York, NY (United States); Stock, Richard G. [Department of Radiation Oncology, Mount Sinai School of Medicine, New York, NY (United States)

    2009-04-01T23:59:59.000Z

    Purpose: We evaluated the relationship between the onset of erectile dysfunction and dose to the penile bulb and neurovascular bundles (NVBs) after real-time ultrasound-guided prostate brachytherapy. Methods and Materials: One hundred forty-seven patients who underwent prostate brachytherapy met the following eligibility criteria: (1) treatment with {sup 125}I brachytherapy to a prescribed dose of 160 Gy with or without hormones without supplemental external beam radiation therapy, (2) identification as potent before the time of implantation based on a score of 2 or higher on the physician-assigned Mount Sinai Erectile Function Score and a score of 16 or higher on the abbreviated International Index of Erectile Function patient assessment, and (3) minimum follow-up of 12 months. Median follow-up was 25.7 months (range, 12-47 months). Results: The 3-year actuarial rate of impotence was 23% (34 of 147 patients). An additional 43% of potent patients (49 of 113 patients) were using a potency aid at last follow-up. The penile bulb volume receiving 100% of the prescription dose (V{sub 100}) ranged from 0-0.05 cc (median, 0 cc), with a dose to the hottest 5% (D{sub 5}) range of 12.5-97.9 Gy (median, 40.8 Gy). There was no correlation between penile bulb D{sub 5} or V{sub 100} and postimplantation impotency on actuarial analysis. For the combined right and left NVB structures, V{sub 100} range was 0.3-5.1 cc (median, 1.8 cc), and V{sub 150} range was 0-1.5 cc (median, 0.31 cc). There was no association between NVB V{sub 100} or V{sub 150} and postimplantation impotency on actuarial analysis. Conclusion: Penile bulb doses are low after real-time ultrasound-guided prostate brachytherapy. We found no correlation between dose to either the penile bulb or NVBs and the development of postimplantation impotency.

  10. Analysis of the influence of tool dynamics in diamond turning

    SciTech Connect (OSTI)

    Fawcett, S.C.; Luttrell, D.E.; Keltie, R.F.

    1988-12-01T23:59:59.000Z

    This report describes the progress in defining the role of machine and interface dynamics on the surface finish in diamond turning. It contains a review of literature from conventional and diamond machining processes relating tool dynamics, material interactions and tool wear to surface finish. Data from experimental measurements of tool/work piece interface dynamics are presented as well as machine dynamics for the DTM at the Center.

  11. Math 3339 Fall 2012 Name: Please, write clearly and justify all your steps, to get proper credit for your work. No notes, books

    E-Print Network [OSTI]

    Labate, Demetrio

    light bulbs, 3 are defective. The bulbs are selected at random and tested, one at a time, until the third defective bulb is found. Compute the probability that the third defective bulb is: (i) the third bulb tested; (ii) the fifth bulb tested; (iii) the tenth bulb tested. #12;(3)[8 Pts] A survey

  12. Hybrid Solar Lighting Provides Energy Savings and Reduces Waste Heat

    SciTech Connect (OSTI)

    Lapsa, Melissa Voss [ORNL; Maxey, L Curt [ORNL; Earl, Dennis Duncan [ORNL; Beshears, David L [ORNL; Ward, Christina D [ORNL; Parks, James Edgar [ORNL

    2006-01-01T23:59:59.000Z

    ABSTRACT Artificial lighting is the largest component of electricity use in commercial U.S. buildings. Hybrid solar lighting (HSL) provides an exciting new means of reducing energy consumption while also delivering significant ancillary benefits associated with natural lighting in buildings. As more than half of all federal facilities are in the Sunbelt region (defined as having an average direct solar radiation of greater than 4 kWh/m2/day) and as more than half of all square footage available in federal buildings is also in the Sunbelt, HSL is an excellent technology fit for federal facilities. The HSL technology uses a rooftop, 4-ft-wide dish and secondary mirror that track the sun throughout the day (Fig. 1). The collector system focuses the sunlight onto 127 optical fibers. The fibers serve as flexible light pipes and are connected to hybrid light fixtures that have special diffusion rods that spread out the light in all directions. One collector powers about eight hybrid light fixtures-which can illuminate about 1,000 square feet. The system tracks at 0.1 accuracy, required by the two-mirror geometry to keep the focused beam on the fiber bundle. When sunlight is plentiful, the optical fibers in the luminaires provide all or most of the light needed in an area. During times of little or no sunlight, a sensor controls the intensity of the artificial lamps to maintain a desired illumination level. Unlike conventional electric lamps, the natural light produces little to no waste heat and is cool to the touch. This is because the system's solar collector removes the infrared light-the part of the spectrum that generates a lot of the heat in conventional bulbs-from the sunlight.

  13. Consistent perturbative light front formulation of Yang-Mills theories

    SciTech Connect (OSTI)

    Morara, M.; Soldati, R. [Dipartimento di Fisica 'A. Righi', Universita di Bologna (Italy); McCartor, G. [Department of Physics, SMU, Dallas, Texas (United States)

    1999-11-22T23:59:59.000Z

    It is shown how to obtain the consistent light front form quantization of a non-Abelian pure Yang-Mills theory (gluondynamics) in the framework of the standard perturbative approach. After a short review of the previous attempts in the light cone gauge A{sub -}=0, it is explained how the difficulties can be overcome after turning to the anti light cone gauge A{sub +}=0. In particular, the generating functional of the renormalized Green's functions turns out to be the same as in the conventional instant form approach, leading to the Mandelstam-Leibbrandt prescription for the free gluon propagator.

  14. TurningPoint Evaluation Results | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic2Uranium Transferon theTedRegion | Department ofAugust 14,Turning on the Fan

  15. Turn Motors Off When Not in Use | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreakingMayDepartmentTest forTechnologiesTribal UtilityFebruary 12,Turkish-U.S.Turn

  16. Light Computing

    E-Print Network [OSTI]

    Gordon Chalmers

    2006-10-13T23:59:59.000Z

    A configuration of light pulses is generated, together with emitters and receptors, that allows computing. The computing is extraordinarily high in number of flops per second, exceeding the capability of a quantum computer for a given size and coherence region. The emitters and receptors are based on the quantum diode, which can emit and detect individual photons with high accuracy.

  17. Residential Lighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Technical squestionnairesquestionnaires AgreementLighting

  18. A Her X-1 Turn-On: Using the pulse profile to probe the outer edge of an accretion disk

    E-Print Network [OSTI]

    M. Kuster; J. Wilms; R. Staubert; P. Risse; W. A. Heindl; R. Rothschild; N. I. Shakura; K. A. Postnov

    2002-03-13T23:59:59.000Z

    The X-ray binary pulsar Her X-1 shows a wide variety of long and short term variabilities in the X-ray light curve. The 35 d variability of the source is interpreted as the influence of a warped, inclined, and twisted accretion disk periodically covering the line of sight to the central neutron star. In 1997 September we observed the ``turn-on'' of a 35 d cycle with the Rossi X-ray Timing Explorer (RXTE). Spectral analysis reveals that during early phases of the turn-on the overall spectrum is composed of X-rays scattered into the line of sight plus heavily absorbed X-rays. This interpretation is consistent with the variation of the pulse profile observed at the same time. The overall shape of the pulse profile is not changing, but towards earlier phases of the turn-on the pulse signature is steadily ``washed out''. This behavior can be understood as an influence of scattering and absorption due to the presence of the accretion disk rim. Using a Monte Carlo code we simulate the influence of both processes on a time variable, beamed emission characteristic, similar to the pulse profile of Her X-1. By comparing the results of the simulation with the observed profiles we determine the amount of scattered radiation, absorbed radiation, and the size of the scattering region.

  19. Guidelines for left-turn bays at unsignalized access locations on arterial roadways

    E-Print Network [OSTI]

    Hawley, Patrick Emmett

    1994-01-01T23:59:59.000Z

    It has long been recognized that effective access management along arterial streets can alleviate traffic congestion. A major goal within access management is to limit the speed differential between turning and through vehicles. Left-turn bays...

  20. Lighting Inventory Lighting Theatre and Drama

    E-Print Network [OSTI]

    Indiana University

    Lighting Inventory Lighting Theatre and Drama Description Totals R.Halls Wells- Metz Light ERS ETC SourceFour 25 25 50 degree ERS Strand Lighting 64 14 24 12 14 36 degree ERS ETC Source Four 15 15 36 degree ERS Strand Lighting 124 60 58 2 4 26 degree ERS ETC SourceFour 2 2 26 degree ERS Strand

  1. Development and Use of a Feedback Control System in Introducing Biotechnology Students to

    E-Print Network [OSTI]

    Allen, Gale

    departments at MSU Mankato. The air temperature near a small light bulb was controlled while the variables on the performance of the control loop. The air temperature near the bulb was monitored with a thermocouple producing conditioning amplifier Light bulb voltage driver Thermocouple and 12V automobile light bulb Light Bulb Driver

  2. Using the Oxygen Plasma Machine 1. Turn on the O2 (g) valve on the wall.

    E-Print Network [OSTI]

    Using the Oxygen Plasma Machine 1. Turn on the O2 (g) valve on the wall. 2. Turn on the O2 inlet valve on the front of the machine just a tiny-bit ­ O2 should now be leaking through the black, chamber-right of the machine), just the Red Power Switch. 6. Turn off the O2 valve on the chamber door. At the same time, turn

  3. Turn Scanning 133 From: Methods in Molecular Biology, vol. 168: Protein Structure, Stability, and Folding

    E-Print Network [OSTI]

    Ponder, Jay

    Turn Scanning 133 133 From: Methods in Molecular Biology, vol. 168: Protein Structure, Stability, and Folding Edited by: K. P. Murphy © Humana Press Inc., Totowa, NJ 7 Turn Scanning: Experimental extended structures. Here we present the use of turn scanning as an experimental method for assessing

  4. LED Lighting Basics

    Broader source: Energy.gov [DOE]

    Light-Emitting diodes (LEDs) efficiently produce light in a fundamentally different way than any legacy or traditional source of light.

  5. Light Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electron 9 5Let us count theLienertLift Forces in a Light

  6. Breaking the light speed barrier

    E-Print Network [OSTI]

    O. I. Chashchina; Z. K. Silagadze

    2012-10-09T23:59:59.000Z

    As it is well known, classical special relativity allows the existence of three different kinds of particles: bradyons, luxons and tachyons. Bradyons have non-zero mass and hence always travel slower than light. Luxons are particles with zero mass, like the photon, and they always travel with invariant velocity. Tachyons are hypothetical superluminal particles that always move faster than light. The existence of bradyons and luxons is firmly established, while the tachyons were never reliably observed. In quantum field theory, the appearance of tachyonic degrees of freedom indicates vacuum instability rather than a real existence of the faster-than-light particles. However, recent controversial claims of the OPERA experiment about superluminal neutrinos triggered a renewed interest in superluminal particles. Driven by a striking analogy of the old Frenkel-Kontorova model of a dislocation dynamics to the theory of relativity, we conjecture in this note a remarkable possibility of existence of the fourth type of particles, elvisebrions, which can be superluminal. The characteristic feature of elvisebrions, distinguishing them from tachyons, is that they are outside the realm of special relativity and their energy remains finite (or may even turn to zero) when the elvisebrion velocity approaches the light velocity.

  7. Two-photon decay of light scalars: a comparison of tetraquark and quarkonium assignments

    E-Print Network [OSTI]

    Francesco Giacosa

    2009-03-31T23:59:59.000Z

    Two-photon decays of light scalar mesons are discussed within the quarkonium and tetraquark asignements: in both cases the decay rate of the sigma resonances turns out to be smaller than 1 keV.

  8. LCLS - The X-ray Laser Has Turned On

    SciTech Connect (OSTI)

    Bergmann, Uwe (Linac Coherent Light Source) [Linac Coherent Light Source

    2010-11-03T23:59:59.000Z

    On April 10, 2009 the Linac Coherent Light Source (LCLS), the world's first hard x-ray free electron laser, was brought to lasing. Producing an x-ray beam with over a billion times higher peak brightness that then most powerful existing syncrotron sources, it marked the beginning of a new era of science. The LCLS pulses arrive at a rate of 60 - 120 Hz in an energy range from 480 eV to 10 keV, with pulse lengths as short as a few fs to about 300 fs. Since October 2009, users have been performing experiments at the LCLS, and currently three of the six planned instruments are available. Although we stand only at the beginning of LCLS science, there is no doubt about the strong sense of early excitement.

  9. Sustainable Office Lighting Options

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Sustainable Office Lighting Options Task Lighting: Task lighting is a localized method of lighting a workspace so that additional, unnecessary lighting is eliminated, decreasing energy usage and costs. Illumination levels in the targeted work areas are higher with task lighting than with the ambient levels

  10. EPI-FLUORESCENCE ATTACHMENT f o r I n v e r t e d M i c r o s c o p e D I A P H O T -T M D

    E-Print Network [OSTI]

    Kleinfeld, David

    . In exchanging the lamp bulb, do not touch the glass part of the lamp bulb with bare hands. Dust, dirt or finger marks on the bulb surface should be wiped with alcohol. For attaching the mercury lamp bulb to the socket, take note of the polarity of the bulb. Before lighting the lamp, confirm that the lamp bulb

  11. Career Zone Green Impact The Green Impact Team would like to welcome you to your new role in the Career Zone and invite you to

    E-Print Network [OSTI]

    Mumby, Peter J.

    -sided paper at our new scrap-paper collection points 2. Energy use ­ lighting, PCs Target: All staff turning to light bulbs, the A-Z Waste Guide is here to fulfil your every need. For example, batteries should to increase heat efficiency 4. Food waste ­ esp. Teabags! Target: Create a composting scheme Target: Put all

  12. High Efficiency, Illumination Quality OLEDs for Lighting

    SciTech Connect (OSTI)

    Joseph Shiang; James Cella; Kelly Chichak; Anil Duggal; Kevin Janora; Chris Heller; Gautam Parthasarathy; Jeffery Youmans; Joseph Shiang

    2008-03-31T23:59:59.000Z

    The goal of the program was to demonstrate a 45 lumen per watt white light device based upon the use of multiple emission colors through the use of solution processing. This performance level is a dramatic extension of the team's previous 15 LPW large area illumination device. The fundamental material system was based upon commercial polymer materials. The team was largely able to achieve these goals, and was able to deliver to DOE a 90 lumen illumination source that had an average performance of 34 LPW a 1000 cd/m{sup 2} with peak performances near 40LPW. The average color temperature is 3200K and the calculated CRI 85. The device operated at a brightness of approximately 1000cd/m{sup 2}. The use of multiple emission colors particularly red and blue, provided additional degrees of design flexibility in achieving white light, but also required the use of a multilayered structure to separate the different recombination zones and prevent interconversion of blue emission to red emission. The use of commercial materials had the advantage that improvements by the chemical manufacturers in charge transport efficiency, operating life and material purity could be rapidly incorporated without the expenditure of additional effort. The program was designed to take maximum advantage of the known characteristics of these material and proceeded in seven steps. (1) Identify the most promising materials, (2) assemble them into multi-layer structures to control excitation and transport within the OLED, (3) identify materials development needs that would optimize performance within multilayer structures, (4) build a prototype that demonstrates the potential entitlement of the novel multilayer OLED architecture (5) integrate all of the developments to find the single best materials set to implement the novel multilayer architecture, (6) further optimize the best materials set, (7) make a large area high illumination quality white OLED. A photo of the final deliverable is shown. In 2003, a large area, OLED based illumination source was demonstrated that could provide light with a quality, quantity, and efficiency on par with what can be achieved with traditional light sources. The demonstration source was made by tiling together 16 separate 6-inch x 6-inch blue-emitting OLEDs. The efficiency, total lumen output, and lifetime of the OLED based illumination source were the same as what would be achieved with an 80 watt incandescent bulb. The devices had an average efficacy of 15 LPW and used solution-processed OLEDs. The individual 6-inch x 6-inch devices incorporated three technology strategies developed specifically for OLED lighting -- downconversion for white light generation, scattering for outcoupling efficiency enhancement, and a scalable monolithic series architecture to enable large area devices. The downconversion approach consists of optically coupling a blue-emitting OLED to a set of luminescent layers. The layers are chosen to absorb the blue OLED emission and then luminescence with high efficiency at longer wavelengths. The composition and number of layers are chosen so that the unabsorbed blue emission and the longer wavelength re-emission combine to make white light. A downconversion approach has the advantage of allowing a wide variety of colors to be made from a limited set of blue emitters. In addition, one does not have to carefully tune the emission wavelength of the individual electro-luminescent species within the OLED device in order to achieve white light. The downconversion architecture used to develop the 15LPW large area light source consisted of a polymer-based blue-emitting OLED and three downconversion layers. Two of the layers utilized perylene based dyes from BASF AG of Germany with high quantum efficiency (>98%) and one of the layers consisted of inorganic phosphor particles (Y(Gd)AG:Ce) with a quantum efficiency of {approx}85%. By independently varying the optical density of the downconversion layers, the overall emission spectrum could be adjusted to maximize performance for lighting (e.g. blackbody temp

  13. Energy Efficiency and Conservation Block Grant Program

    Broader source: Energy.gov (indexed) [DOE]

    approximately 277 conventional60-watt light bulbs in tribal homes with 13-watt Light Emitting Diode (LED) bulbs; * Replacement of approximately 18 40-watt conventional fluorescent...

  14. CX-004575: Categorical Exclusion Determination | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    approximately 277 conventional 60-watt light bulbs in tribal homes with 13-watt Light Emitting Diode (LED) bulbs; ? Replacement of approximately 18 40-watt conventional fluorescent...

  15. Product Quality Assurance for Off-Grid Lighting in Africa

    SciTech Connect (OSTI)

    World Bank; Mills, Evan; Mills, Evan

    2008-07-13T23:59:59.000Z

    Although the emergence of markets for high efficiency off-grid lighting technologies holds promise, realizing the potential of this opportunity on a long-term, sustainable basis requires careful attention to issues of product quality, consumer protection, and the potential for significant 'market spoiling', in anticipation of increases of sales of low cost, low performance off-grid lighting products. The goal of the Lighting Africa quality assurance workshop was to articulate strategies to mitigate the dangers of market spoiling and to explore ways to protect consumers from misleading advertising for sales of inferior, off-grid lighting products in the context of Lighting Africa's overarching objective to support the industry in developing a robust off-grid lighting market in Africa. The workshop resulted in the identification of two strategic approaches for meeting Lighting Africa quality assurance programmatic needs. The first strategy is intended to meet a short-term programmatic need for quality associated with requests for lighting products by bulk procurement agents, such as in a World Bank-financed project. The development of procurement specifications and test procedures that could be used in a quality/usability screening method in order to provide guidance for forthcoming large volume purchases emerged as the best solution to meet this need. Such approaches are used in World Bank-financed solar home systems (SHSs) projects in Bangladesh, Sri Lanka, and China, among others. However, unlike the SHSs which have multiple balance-of-system (BOS) components warranting the need for an array of specifications for individual components, stand alone lighting systems require specifications that are amenable to individual light points. To test this approach, Lighting Africa elected to use the technical specifications issued by the Photovoltaic Global Approval Program for solar lanterns that use CFL bulbs (PVRS11A) as the basis of qualifying such products. A contract has been competitively awarded to the Global Approval Program for Photovoltaics (PV GAP) under the Lighting Africa Program to select and test ten solar lantern product models. Lantern selection will be determined based on a number of criteria, among them, the ability to provide a daily duty cycle of at least 3 hours of light, the number of days of autonomy of battery, the volume of sales (especially in Africa), and whether or not the manufacturing facility is ISO 9000 certified. Those that are confirmed as meeting the specifications may be eligible to receive a PVGAP quality seal. The work is being carried out in partnership with the Photovoltaic and Wind Quality Test Center in Beijing, China and TUV Rhineland in Koeln, Germany. As off-grid LED-based stand-alone lighting products is in a nascent stage of development compared to CFL-based lanterns, Lighting Africa will support the development of a 'Quality Screening' approach to selecting LED lighting, in order not to delay consumers benefiting from such advances. The screening methodology could be used by procurement agencies to qualify LED lighting products for bulk or programmatic procurements. The main elements of this work comprises of developing a procurement specification and test procedure for undertaking a 'quick' quality/usability screening to be used for procuring LED lights and to test up to 30 LED-based lights to screen products that meet the requirement. The second strategy is intended to meet a longer-term need associated with creating a self-sustaining product quality assurance program that will effectively protect the African consumer, prevent significant market spoiling, adapt with expected technological advancements over the long-term--in other words, give consumers the ability to detect quality products and the information needed to find products that meet their specific needs from among the myriad of lighting products that become available commercially. Workshop discussions and the discussions evolving from the workshop led the Lighting Africa team to opt for an approach similar to that of th

  16. Predictions of flow and heat transfer in sharp 180-deg turns of gas turbine coolant channels with and without turning vanes

    SciTech Connect (OSTI)

    Bonhoff, B.; Leusch, J.; Johnson, B.V.

    1999-07-01T23:59:59.000Z

    A numerical study was conducted to determine the effects of turning vanes on the flow characteristics, the pressure drop and the heat transfer distribution in the turn region of two-legged, coolant passages for application to cooling gas turbine blades. The channels consisted of two straight, square-sectioned legs connected by a 180-deg. turn, with an inner radius of 0.15 hydraulic diameters. The ribs were square-sectioned with a height of 0.1 D{sub h}, staggered between leading and trailing side and at an angle of 45-deg. to the flow. Three different configurations of the coolant channel were investigated: with smooth walls, with ribs on two walls and no vane and with ribs on two walls and a 180-deg guide vane in the turn. For all calculations, the Reynolds number at the inlet was Re{sub D} = 100,000, the fluid was water and buoyancy effects were neglected. The simulations were made for rotation numbers, Ro = 0.0 and 0.15. The flow and heat transfer simulations were made with the FLUENT structured code. Based on the results of several previous studies, the differential-Reynolds-Stress turbulence model with wall functions was used. The highest heat transfer in the turn was obtained for both the rotating and non-rotating cases with the ribbed channel without the guide vane. The pressure loss was also higher without the vane. Due to the staggering of the ribs, secondary flow and heat transfer in the turn was higher on the side of the channel where the last rib at the entrance reaches further into the turn. With increasing rotation number, the secondary flow and heat transfer increased on the leading side of the turn. For the configuration with a 180-deg. vane, the mass flux at the outer side of the vane increased with increasing rotation number.

  17. Off-grid energy services for the poor: Introducing LED lighting in the Millennium Villages Project in Malawi

    E-Print Network [OSTI]

    Modi, Vijay

    ) powered by batteries, which are in turn charged by grid electricity or small solar panels, have emerged 2009 Keywords: Solar Lighting Development a b s t r a c t Lanterns that use light-emitting diodes (LEDs as a cost-competitive alternative to kerosene and other fuel-based lighting technologies, offering brighter

  18. Efficiency of static core turn-off in a system-on-a-chip with variation

    DOE Patents [OSTI]

    Cher, Chen-Yong; Coteus, Paul W; Gara, Alan; Kursun, Eren; Paulsen, David P; Schuelke, Brian A; Sheets, II, John E; Tian, Shurong

    2013-10-29T23:59:59.000Z

    A processor-implemented method for improving efficiency of a static core turn-off in a multi-core processor with variation, the method comprising: conducting via a simulation a turn-off analysis of the multi-core processor at the multi-core processor's design stage, wherein the turn-off analysis of the multi-core processor at the multi-core processor's design stage includes a first output corresponding to a first multi-core processor core to turn off; conducting a turn-off analysis of the multi-core processor at the multi-core processor's testing stage, wherein the turn-off analysis of the multi-core processor at the multi-core processor's testing stage includes a second output corresponding to a second multi-core processor core to turn off; comparing the first output and the second output to determine if the first output is referring to the same core to turn off as the second output; outputting a third output corresponding to the first multi-core processor core if the first output and the second output are both referring to the same core to turn off.

  19. Microsoft Word - PR-24-13-BPA-turns-science-educators-visions...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BPA turns science educators' visions into reality with grants From purchasing energy robotic kits to providing funds for the construction of small scale hydropower generators,...

  20. DOE Will Dispose of 34 Metric Tons of Plutonium by Turning it...

    National Nuclear Security Administration (NNSA)

    Will Dispose of 34 Metric Tons of Plutonium by Turning it into Fuel for Civilian Reactors | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People...

  1. Danny Byrd Controlling Lights with PWM and Motion Detectors

    E-Print Network [OSTI]

    Kachroo, Pushkin

    been used to save power by turning off a light when no motion is detected for many decades now. Just a machine that will taper down the power consumption as time goes by, saving energy by the second to shine will slowly slowed, saving energy in the meantime. Though it will not be a huge save in energy

  2. Lighting Options for Homes.

    SciTech Connect (OSTI)

    Baker, W.S.

    1991-04-01T23:59:59.000Z

    This report covers many aspects of various lighting options for homes. Types of light sources described include natural light, artificial light, incandescent lamps, fluorescent lamps, and high intensity discharge lamps. A light source selection guide gives the physical characteristics of these, design considerations, and common applications. Color, strategies for efficient lighting, and types of lighting are discussed. There is one section giving tips for various situations in specific rooms. Rooms and types of fixtures are shown on a matrix with watts saved by using the recommended type lighting for that room and room location. A major emphasis of this report is saving energy by utilizing the most suitable, recommended lighting option. (BN)

  3. Mobile lighting apparatus

    DOE Patents [OSTI]

    Roe, George Michael; Klebanoff, Leonard Elliott; Rea, Gerald W; Drake, Robert A; Johnson, Terry A; Wingert, Steven John; Damberger, Thomas A; Skradski, Thomas J; Radley, Christopher James; Oros, James M; Schuttinger, Paul G; Grupp, David J; Prey, Stephen Carl

    2013-05-14T23:59:59.000Z

    A mobile lighting apparatus includes a portable frame such as a moveable trailer or skid having a light tower thereon. The light tower is moveable from a stowed position to a deployed position. A hydrogen-powered fuel cell is located on the portable frame to provide electrical power to an array of the energy efficient lights located on the light tower.

  4. Light disappears rapidly (exponentially)

    E-Print Network [OSTI]

    Kudela, Raphael M.

    #12;#12;#12;#12;Light disappears rapidly (exponentially) with depth At the same time, the color of the light shifts #12;#12;#12;#12;· Euphotic zone ­ plentiful light ­ 0-100 m (about) · Dysphotic zone ­ very, very little light ­ 100-1000 m (about) · Aphotic zone ­ no light ­ below 1000 m #12;Sunlight in Water

  5. Turning “on” and “off” nucleation and growth: Microwave assisted synthesis of CdS clusters and nanoparticles

    SciTech Connect (OSTI)

    Ferrer, Edmy; Nater, Sariann; Rivera, Daniel; Colon, Jean Marie; Zayas, Francisco; Gonzalez, Miguel [Chemical Imaging Center, Department of Chemistry, The University of Puerto Rico at Mayaguez, Mayaguez, PR 00680 (United States)] [Chemical Imaging Center, Department of Chemistry, The University of Puerto Rico at Mayaguez, Mayaguez, PR 00680 (United States); Castro, Miguel E., E-mail: miguel.castro2@upr.edu [Chemical Imaging Center, Department of Chemistry, The University of Puerto Rico at Mayaguez, Mayaguez, PR 00680 (United States)

    2012-11-15T23:59:59.000Z

    Graphical abstract: Display Omitted Highlights: ? Cadmium acetate and DMSO were employed as ion precursors. ? New approach to controlled CdS nanoparticle synthesis. ? CdS clusters and nanoparticles synthesis achieved using microwave irradiation. ? Microwave irradiation turns on and off nanoparticle growth. ? The formation of clusters, embryos and nanoparticles studied with optical spectroscopy. -- Abstract: We report here on the formation of CdS NP from the microwave assisted reaction of Cd(CH{sub 3}CO{sub 2}){sub 2} with dimethylsulfoxide (DMSO). DMSO serves as the solvent and a controlled source of sulfide ions to form (CdS){sub 1?n?5} clusters at the early stages of the process. The clusters grow into CdS nanoparticles, with diameters that range from 1.6 nm up to over 250 nm, with microwave heating. The time dependence of the onset of light absorption and absorbance are consistent with a concurrent nucleation and growth processes. The formation of clusters and nuclei and their subsequent reactions is controlled by turning on and off the energy supply consistent with an energy barrier to the formation of CdS nanostructures.

  6. New Light Sources for Tomorrow's Lighting Designs

    E-Print Network [OSTI]

    Krailo, D. A.

    can ever be saved on that monthly energy bill. During the past several years, many new light sources have been developed and introduced. These product introductions have not been limited to anyone lamp type, but instead may be found in fila ment..., fluorescent and high intensity discharge lamp families. Man , ufacturers of light sources have two basic goals for new product development. These goals are high efficiency lighting and improved colo'r rendering properties. High efficiency lighting may take...

  7. EK101 Engineering Light Smart Lighting

    E-Print Network [OSTI]

    Bifano, Thomas

    EK101 Engineering Light Smart Lighting Homework for 9/10 1. Make an estimate (using if the patent is granted.) 3. What is a lumen? A lux? How are the two related? How would you use a lux meter, (Lux, Lumens/m2) Luminous Flux: Perceivable light power from a source, (Lumens) Use the lux meter

  8. Specific light in sculpture

    E-Print Network [OSTI]

    Powell, John William

    1989-01-01T23:59:59.000Z

    Specific light is defined as light from artificial or altered natural sources. The use and manipulation of light in three dimensional sculptural work is discussed in an historic and contemporary context. The author's work ...

  9. mexico city at the turn of the twentieth century I Speak of the City

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    mexico city at the turn of the twentieth century I Speak of the City m a u r i c i o t e n o r i o of History The University of Chicago In this dazzling multidisciplinary tour of Mexico City, Mauricio Tenorio epidemiology to poetry, this book challenges the conventional wisdom about both Mexico City and the turn

  10. A Reconfigurable Motor for Experimental Emulation of Stator Winding Inter-Turn and Broken Bar Faults

    E-Print Network [OSTI]

    Povinelli, Richard J.

    A Reconfigurable Motor for Experimental Emulation of Stator Winding Inter-Turn and Broken Bar emulation of stator winding inter-turn and broken rotor bar faults, are presented in this paper such as stator windings or rotor bars when acquiring data from a knWi dinL lar Bearit faulty machine for fault

  11. CAPACITY AT SIGNALIZED INTERSECTION APPROACH WITH A SHORT RIGHT-TURN LANE

    E-Print Network [OSTI]

    Tian, Zong Z.

    blockage to the short right-turn lane. The proposed model provides enhancements to the current Highway to the short-lane section, the capacity of the approach is reduced. The current HCM procedure wouldCAPACITY AT SIGNALIZED INTERSECTION APPROACH WITH A SHORT RIGHT-TURN LANE Zong Z. Tian Associate

  12. Haptic Models of an Automotive Turn-Signal Switch: Identification and Playback Results

    E-Print Network [OSTI]

    Hollerbach, John M.

    Haptic Models of an Automotive Turn-Signal Switch: Identification and Playback Results Mark B of virtual environments. This paper addresses the problem of modeling the feel of an automotive turn- signal would require accurate models of the primary automotive controls, including the steering wheel, gear

  13. "MINE YOUR OWN BUSINESS": USING PROCESS MINING TO TURN BIG DATA INTO REAL VALUE

    E-Print Network [OSTI]

    van der Aalst, Wil

    "MINE YOUR OWN BUSINESS": USING PROCESS MINING TO TURN BIG DATA INTO REAL VALUE Van der Aalst, Wil is to turn event data into valuable insights. Only process mining techniques directly relate event data-oriented analysis techniques (e.g., data mining and machines learning) typically focus on simple classification

  14. Light Duty Combustion Research: Advanced Light-Duty Combustion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Light Duty Combustion Research: Advanced Light-Duty Combustion Experiments Light Duty Combustion Research: Advanced Light-Duty Combustion Experiments 2009 DOE Hydrogen Program and...

  15. Demonstration Assessment of Light Emitting Diode (LED) Residential Downlights and Undercabinet Lights in the Lane County Tour of Homes, Eugene, Oregon

    SciTech Connect (OSTI)

    Ton, My K.; Richman, Eric E.; Gilbride, Theresa L.

    2008-11-10T23:59:59.000Z

    In August 2008 the Pacific Northwest National Laboratory (PNNL) conducted a light emitting diode (LED) residential lighting demonstration project for the U.S. Department of Energy (DOE), Office of Building Technologies, as part of DOE’s Solid State Lighting (SSL) Technology Demonstration Gateway Program. Two lighting technologies, an LED replacement for downlight lamps (bulbs) and an LED undercabinet lighting fixture, were tested in the demonstration which was conducted in two homes built for the 2008 Tour of Homes in Eugene, Oregon. The homes were built by the Lane County Home Builders Association (HBA), and Future B Homes. The Energy Trust of Oregon (ETO) also participated in the demonstration project. The LED downlight product, the LR6, made by Cree LED Lighting Solutions acts as a screw-in replacement for incandescent and halogen bulbs in recessed can downlights. The second product tested is Phillips/Color Kinetics’ eW® Profile Powercore undercabinet fixture designed to mount under kitchen cabinets to illuminate the countertop and backsplash surfaces. Quantitative and qualitative measurements of light performance and electrical power usage were taken at each site before and after initially installed halogen and incandescent lamps were replaced with the LED products. Energy savings and simple paybacks were also calculated and builders who toured the homes were surveyed for their responses to the LED products. The LED downlight product drew 12 Watts of power, cutting energy use by 82% compared to the 65W incandescent lamp and by 84% compared to the 75W halogen lamp. The LED undercabinet fixture drew 10 watts, cutting energy use by 83% to 90% compared to the halogen product, which was tested at two power settings: a low power 60W setting and a high power 105W setting. The LED downlight consistently provided more light than the halogen and incandescent lamps in horizontal measurements at counter height and floor level. It also outperformed in vertical illuminance measurements taken on the walls, indicating better lateral dispersion of the light. The undercabinet fixture’s light output was midway between the low and high power halogen undercabinet fixture light outputs (35.8 foot candle versus 13.4 fc and 53.4 fc) but it produced a more uniform light (max/min ratio of 7.0 versus 10.8). The color correlated temperature (CCT, the blue or yellowness) of the LED light correlated well with the halogen and incandescent lights (2675 K vs 2700 K). The color rendering of the LED downlight also correlated well at 92 CRI compared to 100 CRI for the halogen and incandescent lamps. The LED undercabinet fixture had measures of 2880 K CCT and 71 CRI compared to the 2700 K and 100 CRI scores for the halogen undercabinet fixture. Builders who toured the homes were surveyed; they gave the LED downlight high marks for brightness, said the undercabinet improved shadows and glare and said both products improved overall visibility, home appearance, and home value. Paybacks on the LED downlight ranged from 7.6 years (assuming electricity cost of 11 c/kWh) to 13.5 years (at 5C/kWh). Paybacks on the LED undercabinet fixture in a new home ranged from 4.4 years (11c/kWh electricity) to 7.6 years (5c/kWh) based on product costs of $95 per LED downlight and $140 per LED undercabinet fixture at 3 hrs per day of usage for the downlight and 2 hrs per day for the undercabinet lighting.

  16. Exciting White Lighting

    Broader source: Energy.gov [DOE]

    Windows that emit light and are more energy efficient? Universal Display’s PHOLED technology enables windows that have transparent light-emitting diodes in them.

  17. ILD 12 Name: _____________________ Working out what a model implies: Images

    E-Print Network [OSTI]

    Maryland at College Park, University of

    . If you know the rays all come from a single light bulb, where would you guess that the bulb is located of the bulb. Where would you guess the bulb is located? What could be behind the screen? Situation 3: You now have a converging lens. A light bulb is positioned a distance larger than the focal length to the left

  18. PFP Emergency Lighting Study

    SciTech Connect (OSTI)

    BUSCH, M.S.

    2000-02-02T23:59:59.000Z

    NFPA 101, section 5-9 mandates that, where required by building classification, all designated emergency egress routes be provided with adequate emergency lighting in the event of a normal lighting outage. Emergency lighting is to be arranged so that egress routes are illuminated to an average of 1.0 footcandle with a minimum at any point of 0.1 footcandle, as measured at floor level. These levels are permitted to drop to 60% of their original value over the required 90 minute emergency lighting duration after a power outage. The Plutonium Finishing Plant (PFP) has two designations for battery powered egress lights ''Emergency Lights'' are those battery powered lights required by NFPA 101 to provide lighting along officially designated egress routes in those buildings meeting the correct occupancy requirements. Emergency Lights are maintained on a monthly basis by procedure ZSR-12N-001. ''Backup Lights'' are battery powered lights not required by NFPA, but installed in areas where additional light may be needed. The Backup Light locations were identified by PFP Safety and Engineering based on several factors. (1) General occupancy and type of work in the area. Areas occupied briefly during a shiftly surveillance do not require backup lighting while a room occupied fairly frequently or for significant lengths of time will need one or two Backup lights to provide general illumination of the egress points. (2) Complexity of the egress routes. Office spaces with a standard hallway/room configuration will not require Backup Lights while a large room with several subdivisions or irregularly placed rooms, doors, and equipment will require Backup Lights to make egress safer. (3) Reasonable balance between the safety benefits of additional lighting and the man-hours/exposure required for periodic light maintenance. In some plant areas such as building 236-Z, the additional maintenance time and risk of contamination do not warrant having Backup Lights installed in all rooms. Sufficient light for egress is provided by existing lights located in the hallways.

  19. Fish Passage Through a Simulated Horizontal Bulb Turbine Pressure Regime: A Supplement to"Laboratory Studies of the Effects of Pressure and Dissolved Gas Supersaturation on Turbine-Passed Fish"

    SciTech Connect (OSTI)

    Abernethy, Cary S. (BATTELLE (PACIFIC NW LAB)); Amidan, Brett G. (BATTELLE (PACIFIC NW LAB)); Cada, G F. (ORNL)

    2003-07-31T23:59:59.000Z

    Migratory and resident fish in the Columbia River Basin are exposed to stresses associated with hydroelectric power production, including pressure changes during turbine passage. The responses of fall chinook salmon and bluegill sunfish to rapid pressure change was investigated at the Pacific Northwest National Laboratory. Previous test series evaluated the effects of passage through a vertical Kaplan turbine under the"worst case" pressure conditions and under less severe conditions where pressure changes were minimized. For this series of tests, pressure changes were modified to simulate passage through a horizontal bulb turbine, commonly installed at low head dams. The results were compared to results from previous test series. Migratory and resident fish in the Columbia River Basin are exposed to stresses associated with hydroelectric power production, including pressure changes during turbine passage. The responses of fall chinook salmon and bluegill sunfish to rapid pressure change was investigated at the Pacific Northwest National Laboratory. Previous test series evaluated the effects of passage through a vertical Kaplan turbine under the"worst case" pressure conditions and under less severe conditions where pressure changes were minimized. For this series of tests, pressure changes were modified to simulate passage through a horizontal bulb turbine, commonly installed at low head dams. The results were compared to results from previous test series. Both fish species were acclimated for 16-22 hours at either surface (101 kPa; 1 atm) or 30 ft (191 kPa; 1.9 atm) of pressure in a hyperbaric chamber before exposure to a pressure scenario simulating passage through a horizontal bulb turbine. The simulation was as follows: gradual pressure increase to about 2 atm of pressure, followed by a sudden (0.4 second) decrease in pressure to either 0.7 or 0.95 atm, followed by gradual return to 1 atm (surface water pressure). Following the exposure, fish were held at surface pressure for a 48-hour post exposure observation period. No fall chinook salmon died during or after exposure to the horizontal bulb turbine passage pressures, and no injuries were observed during the 48-hour post exposure observation period. As with the previous test series, it cannot be determined whether fall chinook salmon acclimated to the greater water pressure during the pretest holding period. For bluegill sunfish exposed to the horizontal bulb turbine turbine-passage pressures, only one fish died and injuries were less severe and less common than for bluegills subjected to either the"worst case" pressure or modified Kaplan turbine pressure conditions in previous tests. Injury rates for bluegills were higher at 0.7 atm nadir than for the 0.95 atm nadir. However, injuries were limited to minor internal hemorrhaging. Bluegills did not suffer swim bladder rupture in any tested scenarios. Tests indicated that for most of the cross-sectional area of a horizontal bulb turbine, pressure changes occurring during turbine passage are not harmful to fall chinook salmon and only minimally harmful to bluegill. However, some areas within a horizontal bulb turbine may have extreme pressure conditions that would be harmful to fish. These scenarios were not tested because they represent a small cross-sectional area of the turbine compared to the centerline pressures scenarios used in these tests.

  20. Lighting and Daylight Harvesting

    E-Print Network [OSTI]

    Bos, J.

    2011-01-01T23:59:59.000Z

    exposing us to the latest products and technologies. Daylight Harvesting A system of controlling the direction and the quantity of light both natural and artificial within a given space. This implies: Control of fenestration in terms of size..., transmission and direction. Control of reflected light within a space. Control of electric light in terms of delivery and amount Daylight harvesting systems are typically designed to maintain a minimum recommended light level. This light level...

  1. EK101 Engineering Light Project: Evaluate Residential Lighting

    E-Print Network [OSTI]

    Bifano, Thomas

    EK101 Engineering Light Project: Evaluate Residential Lighting Compare technical and economic characteristics of three sources of residential light. Two teams of four complete the same project Engineering Light Project: Evaluate Residential Lighting Project Assignment: Evaluate current options

  2. Investigation of a moly-oxide electrodeless discharge for lighting applications

    SciTech Connect (OSTI)

    Giuliani, J.L.; Meger, R.A.; Pechacek, R.E.; Hinshelwood, D.D.; Shamamian, V.; Butler, J.E.

    1999-07-01T23:59:59.000Z

    Due to the hazardous material designation of spent fluorescent bulbs on board naval vessels, the Naval Research Laboratory has been investigating alternative lighting concepts which are free of mercury. The ideal goal is an efficient, large volume source, which provides white light directly without the use of a phosphor coating. Experiments with a {mu}wave plasma reactor normally used to diamond growth at {approximately}40 Torr revealed that a combination of O{sub 2}, N{sub 2}, and a heated molybdenum puck led to intense plasma emission in the visible domain. As the reactor was not designed for lighting studies, the authors have been investigating the process in glass tubes with a re-entry geometry and RF driven coils. Results will be presented on the initial discovery, the role of moly-oxide in surface evaporation, and the favorable emission spectrum of atomic molybdenum for visible light. Initial studies of the RF system, including coil design, measured electron density, B-dot measurements, E-to-H transitions, and spectroscopic analysis of various compositions will also be discussed. Finally, the essential problem of a recycling process for the moly emitters from the glass walls back to the moderate pressure plasma using chlorine will be addressed.

  3. Turning Waste Heat into Power: Ener-G-Rotors and the Entrepreneurial...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Waste Heat into Power: Ener-G-Rotors and the Entrepreneurial Mentorship Program Turning Waste Heat into Power: Ener-G-Rotors and the Entrepreneurial Mentorship Program March 16,...

  4. Deficiencies of Lighting Codes and Ordinances in Controlling Light Pollution from Parking Lot Lighting Installations

    E-Print Network [OSTI]

    Royal, Emily

    2012-05-31T23:59:59.000Z

    The purpose of this research was to identify the main causes of light pollution from parking lot electric lighting installations and highlight the deficiencies of lighting ordinances in preventing light pollution. Using an industry-accepted lighting...

  5. Busting Arbitration Myths

    E-Print Network [OSTI]

    Drahozal, Christopher R.

    2008-04-01T23:59:59.000Z

    of the Hindenburg contributed to the 1937 disaster (the skin was painted with layers of aluminum powder and iron oxide?which, when combined in proper proportions, make thermite); whether you save energy by leaving a light bulb on, rather than turning it off when...

  6. Getting the dirt on mud MHERST (AP) -There's something shocking going on in

    E-Print Network [OSTI]

    Lovley, Derek

    an electrical conductor that works like a battery. That's where the microorganisms, called geobacters, come in of microscopic organisms are turning it into electricity. And University of Massachusetts microbiologist Derek squeeze enough electricity created by the muddy microbes to power a light bulb or handheld calculator

  7. DRIVING SAFETY Summer time in the south and that means the potential for afternoon thunderstorms. Listed below are the

    E-Print Network [OSTI]

    Li, X. Rong

    periodically to ensure no bulbs are burned out. · Replace windshield wiper blades; they're not effective. · Use windshield wipers and headlights, not parking lights. · Use defroster if the inside windows fog up that the vehicle behind doesn't crash in to you. · Turn your headlights on low beam and use your windshield wipers

  8. OpenGL Lighting 13. OpenGL Lighting

    E-Print Network [OSTI]

    McDowell, Perry

    OpenGL Lighting 13. OpenGL Lighting · Overview of Lighting in OpenGL In order for lighting to have an effect in OpenGL, two things are required: A light An object to be lit Lights can be set to any color determine how they reflect the light which hits them. The color(s) of an object is determined

  9. Adaptive Street Lighting Controls

    Broader source: Energy.gov [DOE]

    This two-part DOE Municipal Solid-State Street Lighting Consortium webinar focused on LED street lighting equipped with adaptive control components. In Part I, presenters Amy Olay of the City of...

  10. Sandia National Laboratories: Lighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lighting Solid-State Lighting Science EFRC On November 11, 2010, in Welcome History of Incandescence History of LEDs Grand Challenges Our EFRC SSLS-EFRC Contacts News Publications...

  11. Light emitting device comprising phosphorescent materials for white light generation

    DOE Patents [OSTI]

    Thompson, Mark E.; Dapkus, P. Daniel

    2014-07-22T23:59:59.000Z

    The present invention relates to phosphors for energy downconversion of high energy light to generate a broadband light spectrum, which emit light of different emission wavelengths.

  12. Randolph EMC- Agricultural Efficient Lighting Rebate Program (North Carolina)

    Broader source: Energy.gov [DOE]

    Agricultural members of Randolph EMC (REMC) who upgrade to energy-efficient CFL bulbs in agricultural facilities are eligible for an incentive to help cover the initial cost of installation. The...

  13. Advanced Demand Responsive Lighting

    E-Print Network [OSTI]

    Advanced Demand Responsive Lighting Host: Francis Rubinstein Demand Response Research Center demand responsive lighting systems ­ Importance of dimming ­ New wireless controls technologies · Advanced Demand Responsive Lighting (commenced March 2007) #12;Objectives · Provide up-to-date information

  14. Light Rail Transit Strengthening

    E-Print Network [OSTI]

    Minnesota, University of

    Light Rail Transit Improving mobility Easing congestion Strengthening our communities Central Corridor Communicating to the Public During Major Construction May 25, 2011 #12;2 Light Rail Transit;Light Rail Transit Central Corridor Route and Stations 3 · 18 new stations · 9.8 miles of new double

  15. Diagnosis of Stator Winding Inter-Turn Shorts in Induction Motors Fed by PWM-Inverter Drive

    E-Print Network [OSTI]

    Povinelli, Richard J.

    Diagnosis of Stator Winding Inter-Turn Shorts in Induction Motors Fed by PWM-Inverter Drive Systems Abstract---An effective technique for diagnosis of stator winding inter-turn shorts in induction motors fed diagnostics, on-line condition monitoring, stator winding inter-turn shorts, time series, space vector

  16. The effect of weaving maneuvers on operation of a free right-turn lane at ramp terminals 

    E-Print Network [OSTI]

    Park, Minchul

    2006-04-12T23:59:59.000Z

    -turn vehicles on a departure leg. If the ramp terminal is closely followed by the next downstream intersection, weaving maneuvers will occur since some vehicles make a right turn at the ramp terminal and make a left turn at the downstream intersection...

  17. The effect of weaving maneuvers on operation of a free right-turn lane at ramp terminals

    E-Print Network [OSTI]

    Park, Minchul

    2006-04-12T23:59:59.000Z

    -turn vehicles on a departure leg. If the ramp terminal is closely followed by the next downstream intersection, weaving maneuvers will occur since some vehicles make a right turn at the ramp terminal and make a left turn at the downstream intersection...

  18. THE INFLUENCE OF INELASTIC NEUTRINO REACTIONS WITH LIGHT NUCLEI ON THE STANDING ACCRETION SHOCK INSTABILITY IN CORE-COLLAPSE SUPERNOVAE

    SciTech Connect (OSTI)

    Furusawa, Shun; Nagakura, Hiroki; Yamada, Shoichi [Advanced Research Institute for Science and Engineering, Waseda University, 3-4-1, Okubo, Shinjuku, Tokyo 169-8555 (Japan); Sumiyoshi, Kohsuke, E-mail: furusawa@heap.phys.waseda.ac.jp [Numazu College of Technology, Ooka 3600, Numazu, Shizuoka 410-8501 (Japan)

    2013-09-01T23:59:59.000Z

    We perform numerical experiments to investigate the influence of inelastic neutrino reactions with light nuclei on the standing accretion shock instability (SASI). The time evolution of shock waves is calculated with a simple light-bulb approximation for the neutrino transport and a multi-nuclei equation of state. The neutrino absorptions and inelastic interactions with deuterons, tritons, helions, and alpha particles are taken into account in the hydrodynamical simulations. In addition, the effects of ordinary charged-current interactions with nucleons is addressed in the simulations. Axial symmetry is assumed but no equatorial symmetry is imposed. We show that the heating rates of deuterons reach as high as {approx}10% of those of nucleons around the bottom of the gain region. On the other hand, alpha particles are heated near the shock wave, which is important when the shock wave expands and the density and temperature of matter become low. It is also found that the models with heating by light nuclei evolve differently in the non-linear phase of SASI than do models that lack heating by light nuclei. This result is because matter in the gain region has a varying density and temperature and therefore sub-regions appear that are locally rich in deuterons and alpha particles. Although the light nuclei are never dominant heating sources and they work favorably for shock revival in some cases and unfavorably in other cases, they are non-negligible and warrant further investigation.

  19. Scaling Up: Kilolumen Solid-State Lighting Exceeding 100 LPW via Remote Phosphor

    SciTech Connect (OSTI)

    Waqidi Falicoff

    2008-09-15T23:59:59.000Z

    This thirty-month project was successful in attaining its ambitious objectives of demonstrating a radically novel 'remote-phosphor' LED light source that can out-perform conventional conformal coated phosphor LED sources. Numerous technical challenges were met with innovative techniques and optical configurations. This product development program for a new generation of solid-state light sources has attained unprecedented luminosity (over 1 kilo-lumen) and efficacy (based on the criterion lumens per 100mw radiant blue). LPI has successfully demonstrated its proprietary technology for optical synthesis of large uniform sources out of the light output of an array of separated LEDs. Numerous multiple blue LEDs illuminate single a phosphor patch. By separating the LEDs from the phosphor, the phosphor and LEDs operate cooler and with higher efficiency over a wide range of operating conditions (from startup to steady state). Other benefits of the system include: better source uniformity, more types of phosphor can be used (chemical interaction and high temperatures are no longer an issue), and the phosphor can be made up from a pre-manufactured sheet (thereby lowering cost and complexity of phosphor deposition). Several laboratory prototypes were built and operated at the expected high performance level. The project fully explored two types of remote phosphor system: transmissive and reflective. The first was found to be well suited for a replacement for A19 type incandescent bulbs, as it was able to replicate the beam pattern of a traditional filament bulb. The second type has the advantages that it is pre-collimate source that has an adjustable color temperature. The project was divided in two phases: Phase I explored a transmissive design and Phase II of the project developed reflective architectures. Additionally, in Phase II the design of a spherical emitting transmissive remote phosphor bulb was developed that is suitable for replacement of A19 and similar light bulbs. In Phase II several new reflective remote phosphor systems were developed and patents applied for. This research included the development of reflective systems in which the short-pass filter operated at a nominal incidence angle of 15{sup o}, a major advancement of this technology. Another goal of the project was to show that it is possible to align multiple optics to multiple LEDs (spaced apart for better thermal management) to within an accuracy in the z-direction of 10 microns or less. This goal was achieved. A further goal was to show it is possible to combine and homogenize the output from multiple LEDs without any flux loss or significant increase in etendue. This goal also was achieved. The following color-coded computer drawing of the Phase 2 reflective remote phosphor prototype gives an idea of the accuracy challenges encountered in such an assembly. The actual setup has less functional clarity due to the numerous items of auxiliary equipment involved. Not only did 10 degrees of freedoms alignment have to be supplied to the LEDs and component prisms as well, but there were also micro-titrating glue dispensers and vacuum hoses. The project also utilized a recently introduced high-index glass, available in small customized prisms. This prototype also embodies a significant advance in thin-film design, by which an unprecedented 98% single-pass efficiency was attained over a 30 degree range of incidence angle (Patents Pending). Such high efficiency is especially important since it applies to the blue light going to the phosphor and then again to the phosphor's light, so that the 'system' efficiency associated with short-pass filter was 95.5%. Other losses have to be kept equally small, towards which a new type of ultra-clear injection-moldable acrylic was discovered and used to make ultra-transparent CPC optics. Several transmissive remote phosphor prototypes were manufactured that could replace screw-in type incandescent bulbs. The CRI of the white light from these prototypes varied from 55 to 93. The system efficiency achieved was between 27 to 29.5

  20. Light extraction from organic light-emitting diodes for lighting applications by sand-blasting

    E-Print Network [OSTI]

    Light extraction from organic light-emitting diodes for lighting applications by sand@ust.hk Abstract: Light extraction from organic light-emitting diodes (OLEDs) by scattering the light is one of the effective methods for large-area lighting applications. In this paper, we present a very simple and cost

  1. Photonic crystal light source

    DOE Patents [OSTI]

    Fleming, James G. (Albuquerque, NM); Lin, Shawn-Yu (Albuquerque, NM); Bur, James A. (Corrales, NM)

    2004-07-27T23:59:59.000Z

    A light source is provided by a photonic crystal having an enhanced photonic density-of-states over a band of frequencies and wherein at least one of the dielectric materials of the photonic crystal has a complex dielectric constant, thereby producing enhanced light emission at the band of frequencies when the photonic crystal is heated. The dielectric material can be a metal, such as tungsten. The spectral properties of the light source can be easily tuned by modification of the photonic crystal structure and materials. The photonic crystal light source can be heated electrically or other heating means. The light source can further include additional photonic crystals that exhibit enhanced light emission at a different band of frequencies to provide for color mixing. The photonic crystal light source may have applications in optical telecommunications, information displays, energy conversion, sensors, and other optical applications.

  2. Beam-turning magnet design and test for the Recirculating Linear Accelerator

    SciTech Connect (OSTI)

    Crow, J.T. (Sandia National Labs., Albuquerque, NM (United States)); Platt, R.C. (Science Applications International Corp., San Diego, CA (United States))

    1991-01-01T23:59:59.000Z

    We have designed and tested a system for applying a ramped vertical magnetic field for turning the electron beam in the IFR Recirculating Linear Accelerator. The field is highly uniform over two Gaussian beam radii, and can be adjusted for a large radial gradient for increased energy bandwidth. The system includes shielding of the current-carrying rods to protect the pulser from REB induced fields and to reduce the effect of REB images on the beam transport to negligible levels. The system has been tested on the IBEX accelerator with > 95% peak current transport and > 90% charge transport through a 90{degree} turn. 2 refs., 6 figs.

  3. Foundations and Light Compass Foundations and Light Compass

    E-Print Network [OSTI]

    Wong, Jennifer L.

    Foundations and Light Compass Case Study Foundations and Light Compass Case Study Jennifer L. WongQuantitative Sensor--centric Designcentric Design Light CompassLight Compass ­­ Models and Abstractions Contaminant Transport Marine Microorganisms Ecosystems, Biocomplexity What is a Light Compass?What is a Light

  4. Lighting and Surfaces 11.1 Introduction to Lighting

    E-Print Network [OSTI]

    Boyd, John P.

    Chapter 11 Lighting and Surfaces 11.1 Introduction to Lighting Three-dimensional surfaces can react to light, and how computer graphics simulates this. There are three species of light (or "illumination models"): 1. Intrinsic (self-emitting) 2. Ambient light (sometimes called "diffuse light") 3

  5. Arnold Schwarzenegger LIGHTING RESEARCH PROGRAM

    E-Print Network [OSTI]

    Project Summaries ELEMENT 2: ADVANCE LIGHTING TECHNOLOGIES PROJECT 2.1 LIGHT EMITTING DIODE (LED light emitting diodes (LED) technology for general lighting applications by developing a task lamp

  6. Solid-state lighting : the III-V Epi Killer App.

    SciTech Connect (OSTI)

    Tsao, Jeffrey Yeenien

    2010-06-01T23:59:59.000Z

    Throughout its history, lighting technology has made tremendous progress: the efficiency with which power is converted into usable light has increased 2.8 orders of magnitude over three centuries. This progress has, in turn, fueled large increases in the consumption of light and productivity of human society. In this talk, we review an emerging new technology, solid-state lighting: its frontier performance potential; the underlying advances in physics and materials that might enable this performance potential; the resulting energy consumption and human productivity benefits; and the impact on worldwide III-V epi manufacture.

  7. Penile bulb dose and impotence after three-dimensional conformal radiotherapy for prostate cancer on RTOG 9406: Findings from a prospective, multi-institutional, phase I/II dose-escalation study

    SciTech Connect (OSTI)

    Roach, Mack [University of California San Francisco, San Francisco, CA (United States)]. E-mail: roach@radonc17.ucsf.edu; Winter, Kathryn [Radiation Therapy Oncology Group, Philadelphia, PA (United States); Michalski, Jeffrey M. [Washington University, St. Louis, MO (United States); Cox, James D. [3D Quality Assurance Center at Washington University St. Louis, MO (United States); Purdy, James A. [University of Texas M.D. Anderson Cancer Center, Houston, TX (United States); Bosch, Walter [University of Texas M.D. Anderson Cancer Center, Houston, TX (United States); Lin Xiao [University of Texas M.D. Anderson Cancer Center, Houston, TX (United States); Shipley, William S. [Massachusetts General Hospital, Boston MA (United States)

    2004-12-01T23:59:59.000Z

    Purpose: To assess the relationship between the dose to the bulb of the penis and the risk of impotence in men treated on Radiation Therapy Oncology Group (RTOG) 9406. Methods and materials: Men enrolled on a Phase I/II dose-escalation study, RTOG 9406, who were reported to be potent at entry and evaluable (n = 158) were selected for inclusion. Follow-up evaluations were scheduled every 3, 4, and 6 months for the first, second, and the third through fifth years, then annually. At each follow-up visit an assessment of potency status was made. Penile structures were defined by a single observer blinded to the potency status, using Web-based, on-line software. The dosimetry for penile structures was calculated at the Quality Assurance Center at Washington University and provided to RTOG Statistical Headquarters to determine whether there was a relationship between dose and impotence. Results: Patients whose median penile dose was {>=}52.5 Gy had a greater risk of impotence compared with those receiving <52.5 Gy (p = 0.039). In a multivariate analysis neither age, the dose to the prostate, nor the use of hormonal therapy correlated with the risk of impotence. Conclusions: Dose to the bulb of the penis seems to be associated with the risk of radiation-induced impotence.

  8. Corrections to Thomas-Fermi densities at turning points and beyond

    E-Print Network [OSTI]

    Raphael F. Ribeiro; Donghyung Lee; Attila Cangi; Peter Elliott; Kieron Burke

    2015-02-25T23:59:59.000Z

    Uniform semiclassical approximations for the number and kinetic-energy densities are derived for many non-interacting fermions in one-dimensional potentials with two turning points. The resulting simple, closed-form expressions contain the leading corrections to Thomas-Fermi theory, involve neither sums nor derivatives, are spatially uniform approximations, and are exceedingly accurate.

  9. A Study on Crosstalk Analysis in Aggregative Transmission Lines with Turning Vias Tapobrata Bandyopadhyay1

    E-Print Network [OSTI]

    Swaminathan, Madhavan

    A Study on Crosstalk Analysis in Aggregative Transmission Lines with Turning Vias Tapobrata and signal integrity in high-speed signal channels is extremely important. Transmission lines and vias transmission lines (4 mil width) of different lengths arranged in bundles. The eight transmission line bundles

  10. The dynamic cusp aurora on 30 November 1997: response to southward turning of the IMF

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    The dynamic cusp aurora on 30 November 1997: response to southward turning of the IMF P. E a Accepted: 26 January 1999 Abstract. We document the detailed dynamics of the dayside aurora in the $1200®cation of both the red (630.0 nm) and green (557.7 nm) line emissions in the cusp aurora near 1200 MLT and $100

  11. Turning The Web Into An Effective Knowledge Repository INESC-ID / IST

    E-Print Network [OSTI]

    Ferreira, Paulo

    . This includes safely preserving static and dynamic content as well as performing stor- age managementTurning The Web Into An Effective Knowledge Repository Luis Veiga INESC-ID / IST Rua Alves Redol, 9 management, web proxy, detecting distributed cycles, distributed garbage collection. Abstract: To fulfill

  12. ON THE BIDIRECTIONALITY OF THE JWKB CONNECTION FORMULA AT A LINEAR TURNING POINT

    E-Print Network [OSTI]

    Silverstone, Harris J.

    ON THE BIDIRECTIONALITY OF THE JWKB CONNECTION FORMULA AT A LINEAR TURNING POINT Hujun SHENa1) connection formula is demonstrated by a simple numerical example constructed from a linear potential and a box. Keywords: JWKB; Connection formula; Borel sum; Asymptotic expansion; Tunneling; Jeffreys

  13. Wind Energy in Indian Country: Turning to Wind for the Seventh Generation

    E-Print Network [OSTI]

    Kammen, Daniel M.

    Wind Energy in Indian Country: Turning to Wind for the Seventh Generation by Andrew D. Mills: ___________________________________________ Jane Stahlhut Date #12;Wind Energy in Indian Country A.D. Mills Abstract - ii - Abstract Utility-scale wind projects are increasingly being developed in rural areas of the United States. In the West

  14. DOCUMENTS TO BE TURNED IN AT THE SAME TIME AS ELECTRONIC THESIS/DISSERTATION

    E-Print Network [OSTI]

    Jacobs, Laurence J.

    DOCUMENTS TO BE TURNED IN AT THE SAME TIME AS ELECTRONIC THESIS/DISSERTATION In addition to the submission of an acceptably formatted electronic thesis or dissertation (ETD), the following documents must in order for you to graduate in a given semester. Deadlines may be found at http://www.grad.gatech.edu/theses-dissertations

  15. Mimicry of Sharp Turning Behaviours in a Robotic Fish* Jindong Liu Huosheng Hu

    E-Print Network [OSTI]

    Hu, Huosheng

    Mimicry of Sharp Turning Behaviours in a Robotic Fish* Jindong Liu Huosheng Hu Department is supported by London Aquarium Ltd. Abstract - In nature, fish has astonishing swimming ability after thousands years of evolution. To realise fish-like swimming behaviours by a robotic system poses tremendous

  16. Aortic Valve Turning Over a New Leaf(let) in Endothelial Phenotypic Heterogeneity

    E-Print Network [OSTI]

    Simmons, Craig A.

    Aortic Valve Turning Over a New Leaf(let) in Endothelial Phenotypic Heterogeneity Peter F. Davies, Anthony G. Passerini, Craig A. Simmons A ortic valve diseases are debilitating cardiovascular disorders the longevity of replacement valves and to improve tissue engineered substitutes,1 the underlying mech- anisms

  17. MAGNETOSPHERIC RESPONSE TIMES FOLLOWING SOUTHWARD IMF TURNINGS N. E. Turner and D. N. Baker

    E-Print Network [OSTI]

    California at Berkeley, University of

    . Introduction Southward turnings of the IMF are known to initi- ate the transfer of energy from the solar wind, University of Colorado Boulder, CO T. I. Pulkkinen Finnish Meteorological Institute Helsinki, Finland H. J:2 minutes after the solar wind change reached the magnetopause and continued to recon g- ure forabout 13 min

  18. Road salt turning Twin Cities lakes into dead seas By JOSEPHINE MARCOTTY, Star Tribune

    E-Print Network [OSTI]

    Minnesota, University of

    Road salt turning Twin Cities lakes into dead seas By JOSEPHINE MARCOTTY, Star Tribune March 23 in lakes and streams around the Twin Cities -- road salt. The fish, bugs and other wildlife that live, a primary ingredient in salt, and what it will take to keep urban waters healthy. But the far more difficult

  19. Turning Relational DBMS into Nested Relational DBMS GeneticXchange, Inc

    E-Print Network [OSTI]

    Wong, Limsoon

    Turning Relational DBMS into Nested Relational DBMS Jing Chen GeneticXchange, Inc chenjing previously been described [24, 23], the details of its interface to relational DBMS and other sources have never been published. In this paper, we describe the Kleisli's interface to relational DBMS

  20. Managing Chaos: Models of Turn-taking in Character-multichild Interactions

    E-Print Network [OSTI]

    Hochberg, Michael

    . ACM 978-1-4503-2129-7/13/12 ...$15.00. . exchanges are also desirable when humans talk with virtual-child interaction. 1. INTRODUCTION Turn-taking is an essential mechanism in human language interactions [19]. Our, an animated or robotic character has one overarching goal: to make play effective and fun. The character must

  1. Supplement to: Evidence of a possible turning point in solar UV-B over

    E-Print Network [OSTI]

    Meskhidze, Nicholas

    Supplement to: Evidence of a possible turning point in solar UV-B over Canada, Europe and Japan C Observatory Lindenberg, German Meteorological Service, Germany [7] Climate Change Unit, Finnish Meteorological to ground-based AOD changes at 320nm at Thessaloniki (upper panel) and Lindenberg (lower panel). #12;Figure

  2. Abstract. Free-floating space manipulator systems have spacecraft actuators turned off and exhibit nonholonomic be-

    E-Print Network [OSTI]

    Papadopoulos, Evangelos

    Abstract. Free-floating space manipulator systems have spacecraft actuators turned off and exhibit a specific system design so that the system is made controllable and linearizable by prolongations. Agrawal- Kostas Nanos is with the Dept. of Mechanical Engineering, National Technical University of Athens, Greece

  3. National Synchrotron Light Source

    ScienceCinema (OSTI)

    BNL

    2009-09-01T23:59:59.000Z

    A tour of Brookhaven's National Synchrotron Light Source (NSLS), hosted by Associate Laboratory Director for Light Sources, Stephen Dierker. The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviolet, and x-ray light for basic and applied research in physics, chemistry, medicine, geophysics, environmental, and materials sciences.

  4. LED Lighting Retrofit

    E-Print Network [OSTI]

    Shaw-Meadow, N.

    2011-01-01T23:59:59.000Z

    ? Municipal Street Lighting Consortium ? American Public Power Association (APPA) ? Demonstration in Energy Efficiency Development (DEED) ? Source of funding and database of completed LED roadway projects 6 Rules of the Road ESL-KT-11-11-57 CATEE 2011..., 2011 ? 9 Solar-Assisted LED Case Study LaQuinta Hotel, Cedar Park, Texas ? Utilizes 18 - ActiveLED Solar-Assisted Parking Lot Lights ? Utilizes ?power management? to extend battery life while handling light output ? Reduces load which reduces PV...

  5. Edmund G. Brown Jr. LIGHTING CALIFORNIA'S FUTURE

    E-Print Network [OSTI]

    Edmund G. Brown Jr. Governor LIGHTING CALIFORNIA'S FUTURE: SMART LIGHT-EMITTING DIODE LIGHTING's Future: Smart LightEmitting Diode Lighting in Residential Fans. California Energy Commission, PIER

  6. Total Light Management

    Broader source: Energy.gov [DOE]

    Presentation covers total light management, and is given at the Spring 2010 Federal Utility Partnership Working Group (FUPWG) meeting in Providence, Rhode Island.

  7. Lighting Technology Panel

    Broader source: Energy.gov [DOE]

    Presentation covers the Lighting Technology Panel for the Federal Utility Partnership Working Group (FUPWG) meeting, held on November 18-19, 2009. 

  8. Hybrid Solar Lighting

    SciTech Connect (OSTI)

    Maxey, L Curt [ORNL

    2008-01-01T23:59:59.000Z

    Hybrid solar lighting systems focus highly concentrated sunlight into a fiber optic bundle to provide sunlight in rooms without windows or conventional skylights.

  9. Solid-State Lighting

    Broader source: Energy.gov (indexed) [DOE]

    into the market. On the market side, DOE works closely with drivers, heat sinks, and optics. LEDs must be carefully energy efficiency program partners, lighting professionals,...

  10. A new equation of state with light nuclei and their weak interactions in core-collapse supernova simulations

    SciTech Connect (OSTI)

    Furusawa, Shun; Yamada, Shoichi [Waseda University, 3-4-1, Okubo, Shinjuku, Tokyo 169-8555 (Japan); Nagakura, Hiroki [Yukawa Institute for Theoretical Physics, Kyoto University, Oiwake-cho, Kitashirakawa, Sakyo-ku, Kyoto, 606-8502 (Japan); Sumiyoshi, Kohsuke [Numazu College of Technology, Ooka 3600, Numazu, Shizuoka 410-8501 (Japan); Suzuki, Hideyuki [Faculty of Science and Technology, Tokyo University of Science, Yamazaki 2641, Noda, Chiba 278-8510 (Japan)

    2014-05-02T23:59:59.000Z

    We perform numerical experiments to investigate the influence of inelastic neutrino reactions with light nuclei on the standing accretion shock instability. The time evolutions of shock waves are calculated with a simple light-bulb approximation for the neutrino transport and a multi-nuclei equation of state. The neutrino absorptions and inelastic interactions with deuterons, tritons, helions and alpha particles are taken into account in the hydrodynamical simulations in addition to the ordinary charged-current interactions with nucleons. Axial symmetry is assumed but no equatorial symmetry is imposed. We show that the heating rates of deuterons reach as high as ? 10% of those of nucleons around the bottom of the gain region. On the other hands, alpha particles heat the matter near the shock wave, which is important when the shock wave expands and density and temperature of matter become low. It is also found that the models with heating by light nuclei have different evolutions from those without it in non-linear evolution phase. The matter in the gain region has various densities and temperatures and there appear regions that are locally rich in deuterons and alpha particles. These results indicate that the inelastic reactions of light nuclei, especially deuterons, should be incorporated in the simulations of core-collapse supernovae.

  11. Thermal Issues Associated with the Lighting Systems, Electronics Racks, and Pre-Amplifier Modules in the National Ignition System

    SciTech Connect (OSTI)

    A. C. Owen; J. D. Bernardin; K. L. Lam

    1998-08-01T23:59:59.000Z

    This report summarizes an investigation of the thermal issues related to the National Ignition Facility. The influence of heat sources such as lighting fixtures, electronics racks, and pre-amplifier modules (PAMs) on the operational performance of the laser guide beam tubes and optical alignment hardware in the NE laser bays were investigated with experiments and numerical models. In particular, empirical heat transfer data was used to establish representative and meaningful boundary conditions and also serve as bench marks for computational fluid dynamics (CFD) models. Numerical models, constructed with a commercial CFD code, were developed to investigate the extent of thermal plumes and radiation heat transfer from the heat sources. From these studies, several design modifications were recommended including reducing the size of all fluorescent lights in the NIF laser bays to single 32 W bulb fixtures, maintaining minimum separation distances between light fixtures/electronics racks and beam transport hardware, adding motion sensors in areas of the laser bay to control light fixture operation during maintenance procedures, properly cooling all electronics racks with air-water heat exchangers with heat losses greater than 25 W/rack to the M1 laser bay, ensuring that the electronics racks are not overcooked and thus maintain their surface temperatures to within a few degrees centigrade of the mean air temperature, and insulating the electronic bays and optical support structures on the PAMs.

  12. Explosively pumped laser light

    DOE Patents [OSTI]

    Piltch, Martin S. (Los Alamos, NM); Michelotti, Roy A. (Los Alamos, NM)

    1991-01-01T23:59:59.000Z

    A single shot laser pumped by detonation of an explosive in a shell casing. The shock wave from detonation of the explosive causes a rare gas to luminesce. The high intensity light from the gas enters a lasing medium, which thereafter outputs a pulse of laser light to disable optical sensors and personnel.

  13. Light intensity compressor

    DOE Patents [OSTI]

    Rushford, Michael C. (Livermore, CA)

    1990-01-01T23:59:59.000Z

    In a system for recording images having vastly differing light intensities over the face of the image, a light intensity compressor is provided that utilizes the properties of twisted nematic liquid crystals to compress the image intensity. A photoconductor or photodiode material that is responsive to the wavelength of radiation being recorded is placed adjacent a layer of twisted nematic liquid crystal material. An electric potential applied to a pair of electrodes that are disposed outside of the liquid crystal/photoconductor arrangement to provide an electric field in the vicinity of the liquid crystal material. The electrodes are substantially transparent to the form of radiation being recorded. A pair of crossed polarizers are provided on opposite sides of the liquid crystal. The front polarizer linearly polarizes the light, while the back polarizer cooperates with the front polarizer and the liquid crystal material to compress the intensity of a viewed scene. Light incident upon the intensity compressor activates the photoconductor in proportion to the intensity of the light, thereby varying the field applied to the liquid crystal. The increased field causes the liquid crystal to have less of a twisting effect on the incident linearly polarized light, which will cause an increased percentage of the light to be absorbed by the back polarizer. The intensity of an image may be compressed by forming an image on the light intensity compressor.

  14. Lighting affects appearance LightSource emits photons

    E-Print Network [OSTI]

    Jacobs, David

    1 Lighting affects appearance #12;2 LightSource emits photons Photons travel in a straight line). And then some reach the eye/camera. #12;3 Reflectance Model how objects reflect light. Model light sources Algorithms for computing Shading: computing intensities within polygons Determine what light strikes what

  15. VIRTUAL LIGHT: DIGITALLY-GENERATED LIGHTING FOR VIDEO CONFERENCING APPLICATIONS

    E-Print Network [OSTI]

    Fisher, Kathleen

    VIRTUAL LIGHT: DIGITALLY-GENERATED LIGHTING FOR VIDEO CONFERENCING APPLICATIONS Andrea Basso method to improve the lighting conditions of a real scene or video sequence. In particular we concentrate on modifying real light sources intensities and inserting virtual lights into a real scene viewed from a fixed

  16. Electroless vs electrodeposited Ni-P alloys for diamond turning applications

    SciTech Connect (OSTI)

    Dini, J.W.

    1991-07-01T23:59:59.000Z

    Electrolytes nickel deposits with greater than 10% phosphorous have been widely used for diamond turning applications such as fabrications of large optics and other high precision parts. Although the coatings have worked well, they are not without their drawbacks. Porosity and nodule formation have been problems as well as the difficulty of obtaining deposits greater than about 75 {mu}m. In recent years much effort has been directed at the investigating electrodeposition of Ni-P alloys in an attempt to avoid these problems. The purpose of this paper is to compare diamond turning results for both electroless and electrodeposited alloys and speculate about the future uses of electrodeposited Ni-P for precision finishing applications. 16 refs., 7 figs.

  17. Turning a negative into a positive: Researchers find promising use for excessive nitrate

    E-Print Network [OSTI]

    Wythe, Kathy

    2009-01-01T23:59:59.000Z

    Dr. Cristine Morgan, Texas AgriLife Research soil scientist, takes soil cores for nitrate analysis before the drip irrigation system was installed. Story by Kathy Wythe Turning a negative into a positive Researchers fi nd promising use... for excessive nitrate For 30 years, farmers in northwest central Texas have known that high level of nitrates in irrigation water from the Seymour Aquifer is a problem. Now, with research conducted by Texas AgriLife Research scientists, that problem may...

  18. Draft!07"18"2011! 1 Turning the Tide on Outages1

    E-Print Network [OSTI]

    Amin, S. Massoud

    !programs!of!replacement,!rehabilitation!and!new!investment!in!the! U.S.!infrastructure.! ! Focusing!on!the!electric!power!sector,!the!power!outages!whether!the!carrying!capacity!or!safety!margin!will!exist! to!support!anticipated!demand!is!in!question.! ! To!assess!impacts!using!actual!electric!power!outage! Draft!07"18"2011! 1 Turning the Tide on Outages1 What are the true costs of implementing

  19. Turning Waste Heat into Power: Ener-G-Rotors and the Entrepreneurial Mentorship Program

    Broader source: Energy.gov [DOE]

    If you’ve ever driven by an industrial plant, you’ve probably noticed big white plumes rising from the tops of the facilities. While it might look like smoke or pollution at first glance, most of the time those white plumes are comprised of steam and heat, or what Ener-G-Rotors CEO Michael Newell calls waste heat. Mike and the researchers of Ener-G-Rotors are finding ways to use this escaped steam and turn it into energy.

  20. Turning a negative into a positive: Researchers find promising use for excessive nitrate 

    E-Print Network [OSTI]

    Wythe, Kathy

    2009-01-01T23:59:59.000Z

    for excessive nitrate For 30 years, farmers in northwest central Texas have known that high level of nitrates in irrigation water from the Seymour Aquifer is a problem. Now, with research conducted by Texas AgriLife Research scientists, that problem may... turn into a benefit. Nitrate is the most common chemical con- taminant in groundwater. For the Seymour, a shallow aquifer underlying about 300,000 acres in 20 counties, more than 50 percent of groundwater nitrate measurements exceed the federal...

  1. Studies of optimal track-fitting techniques for the DarkLight experiment

    E-Print Network [OSTI]

    Balakrishnan, Purnima Parvathy

    2013-01-01T23:59:59.000Z

    The DarkLight experiment is searching for a dark force carrier, the A' boson, and hopes to measure its mass with a resolution of approximately 1 MeV/c 2 . This mass calculation requires precise reconstruction to turn data, ...

  2. Permitted Oxygen Abundances and the Temperature Scale of Metal-Poor Turn-Off Stars

    E-Print Network [OSTI]

    J. Melendez; N. G. Shchukina; I. E. Vasiljeva; I. Ramirez

    2006-01-12T23:59:59.000Z

    We use high quality VLT/UVES published data of the permitted OI triplet and FeII lines to determine oxygen and iron abundances in unevolved (dwarfs, turn-off, subgiants) metal-poor halo stars. The calculations have been performed both in LTE and NLTE, employing effective temperatures obtained with the new infrared flux method (IRFM) temperature scale by Ramirez & Melendez, and surface gravities from Hipparcos parallaxes and theoretical isochrones. A new list of accurate transition probabilities for FeII lines, tied to the absolute scale defined by laboratory measurements, has been used. We find a plateau in the oxygen-to-iron ratio over more than two orders of magnitude in iron abundance (-3.2 < [Fe/H] < -0.7), with a mean [O/Fe] = 0.5 dex (sigma = 0.1 dex), independent of metallicity, temperature and surface gravity. According to the new IRFM Teff scale, the temperatures of turn-off halo stars strongly depend on metallicity, a result that is in excellent qualitative and quantitative agreement with stellar evolution calculations, which predict that the Teff of the turn-off at [Fe/H] = -3 is about 600-700 K higher than that at [Fe/H] = -1.

  3. Lakeview Light and Power- Commercial Lighting Rebate Program

    Broader source: Energy.gov [DOE]

    Lakeview Light and Power offers a commercial lighting rebate program. Rebates apply to the installation of energy efficient lighting retrofits in non-residential buildings. The rebate program is...

  4. Green Light Pulse Oximeter

    DOE Patents [OSTI]

    Scharf, John Edward (Oldsmar, FL)

    1998-11-03T23:59:59.000Z

    A reflectance pulse oximeter that determines oxygen saturation of hemoglobin using two sources of electromagnetic radiation in the green optical region, which provides the maximum reflectance pulsation spectrum. The use of green light allows placement of an oximetry probe at central body sites (e.g., wrist, thigh, abdomen, forehead, scalp, and back). Preferably, the two green light sources alternately emit light at 560 nm and 577 nm, respectively, which gives the biggest difference in hemoglobin extinction coefficients between deoxyhemoglobin, RHb, and oxyhemoglobin, HbO.sub.2.

  5. White light velocity interferometer

    DOE Patents [OSTI]

    Erskine, D.J.

    1999-06-08T23:59:59.000Z

    The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

  6. Sandia Energy - (Lighting and) Solid-State Lighting: Science...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on the third and upcoming revolution (illumination). Topics cover the basics of light-emitting diode (LED) operation; a 200-year history of lighting technology; the importance of...

  7. Sandia National Laboratories: (Lighting and) Solid-State Lighting...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on the third and upcoming revolution (illumination). Topics cover the basics of light-emitting diode (LED) operation; a 200-year history of lighting technology; the importance of...

  8. Columbia Water and Light- HVAC and Lighting Efficiency Rebates

    Broader source: Energy.gov [DOE]

    Columbia Water and Light (CWL) offers rebates to its commercial and industrial customers for the purchase of high efficiency HVAC installations and efficient lighting. Incentives for certain...

  9. Reading Municipal Light Department- Business Lighting Rebate Program

    Broader source: Energy.gov [DOE]

    Reading Municipal Light Department (RMLD) offers incentives for non-residential customers to install energy efficient lights and sensors in existing facilities. In addition to rebates for the...

  10. Peninsula Light Company- Commercial Efficient Lighting Rebate Program

    Broader source: Energy.gov [DOE]

    Peninsula Light Company (PLC) offers a rebate program for commercial customers who wish to upgrade to energy efficient lighting. Participating customers must be served by PLC commercial service....

  11. Light Duty Combustion Research: Advanced Light-Duty Combustion...

    Broader source: Energy.gov (indexed) [DOE]

    duty Diesel Combustion Research Advanced Light-Duty Combustion Experiments Paul Miles Sandia National Laboratories Light-Duty Combustion Modeling Rolf Reitz University of Wisconsin...

  12. Efficient Light Sources Today

    E-Print Network [OSTI]

    Hart, A. L.

    1982-01-01T23:59:59.000Z

    This paper reviews new lamp and lighting technology in terms of application and economic impact. Included are the latest advances in High Intensity Discharge systems, energy saving fluorescent lamps and ballasts, and the new state of the art high...

  13. Natural lighting and skylights

    E-Print Network [OSTI]

    Evans, Benjamin Hampton

    1961-01-01T23:59:59.000Z

    outlined herein, the feasibility of using scale models for studying skylights is also an established fact. The method of analysis by models can be a valuable tool to any designer who is concerned about day-lighting....

  14. National Synchrotron Light Source

    ScienceCinema (OSTI)

    None

    2010-01-08T23:59:59.000Z

    A tour of Brookhaven's National Synchrotron Light Source (NSLS). The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviole

  15. Light Vector Mesons

    E-Print Network [OSTI]

    Alexander Milov

    2008-12-21T23:59:59.000Z

    This article reviews the current status of experimental results obtained in the measurement of light vector mesons produced in proton-proton and heavy ion collisions at different energies. The review is focused on two phenomena related to the light vector mesons; the modification of the spectral shape in search of Chiral symmetry restoration and suppression of the meson production in heavy ion collisions. The experimental results show that the spectral shape of light vector mesons are modified compared to the parameters measured in vacuum. The nature and the magnitude of the modification depends on the energy density of the media in which they are produced. The suppression patterns of light vector mesons are different from the measurements of other mesons and baryons. The mechanisms responsible for the suppression of the mesons are not yet understood. Systematic comparison of existing experimental results points to the missing data which may help to resolve the problem.

  16. Light and Energy -Daylight measurements

    E-Print Network [OSTI]

    Light and Energy - Daylight measurements #12;Light and Energy - Daylight measurements Authors: Jens;3 Title Light and Energy Subtitle Daylight measurements Authors Jens Christoffersen, Ásta Logadóttir ........................................................................................................ 5 Daylight quantity

  17. Light as a Healing Mechanism

    E-Print Network [OSTI]

    Lingampalli, Nithya

    2013-01-01T23:59:59.000Z

    S. (1991). Meridians conduct light. Moskow: Raum and Zeit.the bod’ys absorption of light. Explore, 9(2), doi: https://01). The healing use of light and color. Health Care Design

  18. Solid state lighting component

    DOE Patents [OSTI]

    Yuan, Thomas; Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald

    2010-10-26T23:59:59.000Z

    An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

  19. Solid state lighting component

    DOE Patents [OSTI]

    Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald; Yuan, Thomas

    2012-07-10T23:59:59.000Z

    An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

  20. A Highly Selective Turn-On Colorimetric, Red Fluorescent Sensor for Detecting Mobile Zinc in Living Cells

    E-Print Network [OSTI]

    Du, Pingwu

    We describe ZRL1, a turn-on colorimetric and red fluorescent zinc ion sensor. The Zn2+-promoted ring opening of the rhodamine spirolactam ring in ZRL1 evokes a 220-fold fluorescence turn-on response. In aqueous media, ZRL1 ...

  1. July 18, 2012 Using QECBs for Street Lighting Upgrades

    E-Print Network [OSTI]

    lighting technologies (e.g. light-emitting diodes, induction lighting) can reduce street light energy

  2. Light-extraction enhancement in GaN-based light-emitting diodes using grade-refractive-index amorphous titanium oxide films with porous structures

    SciTech Connect (OSTI)

    Liu, D.-S.; Lin, T.-W.; Huang, B.-W.; Juang, F.-S.; Lei, P.-H. [Institute of Electro-Optical and Materials Science, National Formosa University, Huwei 63201, Taiwan (China); Hu, C.-Z. [Chilin Technology Co. Ltd., Tainan County 71758, Taiwan (China)

    2009-04-06T23:59:59.000Z

    Amorphous titanium oxide (a-TiO{sub x}:OH) films prepared by plasma-enhanced chemical-vapor deposition at 200 and 25 deg. C are in turn deposited onto the GaN-based light-emitting diode (LED) to enhance the associated light extraction efficiency. The refractive index, porosity, and photocatalytic effect of the deposited films are correlated strongly with the deposition temperatures. The efficiency is enhanced by a factor of {approx}1.31 over that of the uncoated LEDs and exhibited an excellent photocatalytic property after an external UV light irradiation. The increase in the light extraction is related to the reduction in the Fresnel transmission loss and the enhancement of the light scattering into the escape cone by using the graded-refractive-index a-TiO{sub x}:OH film with porous structures.

  3. Analysis of Minimum Efficiency Performance Standards for Residential General Service Lighting in Chile

    SciTech Connect (OSTI)

    Letschert, Virginie E.; McNeil, Michael A.; Leiva Ibanez, Francisco Humberto; Ruiz, Ana Maria; Pavon, Mariana; Hall, Stephen

    2011-06-01T23:59:59.000Z

    Minimum Efficiency Performance Standards (MEPS) have been chosen as part of Chile's national energy efficiency action plan. As a first MEPS, the Ministry of Energy has decided to focus on a regulation for lighting that would ban the sale of inefficient bulbs, effectively phasing out the use of incandescent lamps. Following major economies such as the US (EISA, 2007) , the EU (Ecodesign, 2009) and Australia (AS/NZS, 2008) who planned a phase out based on minimum efficacy requirements, the Ministry of Energy has undertaken the impact analysis of a MEPS on the residential lighting sector. Fundacion Chile (FC) and Lawrence Berkeley National Laboratory (LBNL) collaborated with the Ministry of Energy and the National Energy Efficiency Program (Programa Pais de Eficiencia Energetica, or PPEE) in order to produce a techno-economic analysis of this future policy measure. LBNL has developed for CLASP (CLASP, 2007) a spreadsheet tool called the Policy Analysis Modeling System (PAMS) that allows for evaluation of costs and benefits at the consumer level but also a wide range of impacts at the national level, such as energy savings, net present value of savings, greenhouse gas (CO2) emission reductions and avoided capacity generation due to a specific policy. Because historically Chile has followed European schemes in energy efficiency programs (test procedures, labelling program definitions), we take the Ecodesign commission regulation No 244/2009 as a starting point when defining our phase out program, which means a tiered phase out based on minimum efficacy per lumen category. The following data were collected in order to perform the techno-economic analysis: (1) Retail prices, efficiency and wattage category in the current market, (2) Usage data (hours of lamp use per day), and (3) Stock data, penetration of efficient lamps in the market. Using these data, PAMS calculates the costs and benefits of efficiency standards from two distinct but related perspectives: (1) The Life-Cycle Cost (LCC) calculation examines costs and benefits from the perspective of the individual household; and (2) The National Perspective projects the total national costs and benefits including both financial benefits, and energy savings and environmental benefits. The national perspective calculations are called the National Energy Savings (NES) and the Net Present Value (NPV) calculations. PAMS also calculate total emission mitigation and avoided generation capacity. This paper describes the data and methodology used in PAMS and presents the results of the proposed phase out of incandescent bulbs in Chile.

  4. Design and Predictive Control of a Net Zero Energy Home

    E-Print Network [OSTI]

    Morelli, F.; Abbarno, N.; Boese, E.; Bullock, J.; Carter, B.; Edwards, R.; Lapite, O.; Mann, D.; Mulvihill, C.; Purcell, E.; Stein, M. IV; Rasmussen, B. P.

    2013-01-01T23:59:59.000Z

    the same amount of light as traditional incandescent bulbs with less energy. Incandescent bulbs are inherently inefficient as most of the energy they consume goes towards heat generation. Compact fluorescent (CFL) and light emitting diode (LED) bulbs... as heat [1]. Compact fluorescent lamps (CFLs) and Light Emitting Diodes (LEDs) were analyzed in comparison with incandescent lamps. To determine the most energy efficient bulb, energy consumption for each type of bulb is needed. To do this, the amount...

  5. The effects of a fast-turning trajectory in multiple-field inflation

    E-Print Network [OSTI]

    Maciej Konieczka; Raquel H. Ribeiro; Krzysztof Turzynski

    2014-08-27T23:59:59.000Z

    The latest results from PLANCK impose strong constraints on features in the spectrum of the curvature perturbations from inflation. We analyse the possibility of particle production induced by sharp turns of the trajectory in field space in inflation models with multiple fields. Although the evolution of the background fields can be altered by particle production, we find rather modest changes in the power spectrum even for the most extreme case in which the entire kinetic energy of the scalar fields is converted into particles.

  6. Modified Extraction Scheme for the CERN PS Multi-Turn Extraction

    E-Print Network [OSTI]

    Gilardoni, S; Hernalsteens, C; Lachaize, A; Métral, G

    2012-01-01T23:59:59.000Z

    High-activation of the extraction magnetic septum of the CERN PS machine was observed due to the losses of the continuous beam extracted via the Multi-Turn Extraction (MTE) method. A possible mitigation measure consists of using an existing electrostatic septum, located upstream of the extraction magnetic septum, to deflect the beam. This would highly decrease the beam losses, and hence the induced activation, during the rise time of the MTE kickers due to the reduced thickness of the electrostatic septum with respect to the magnetic one. The layout of this new extraction will be described in detail and the results of beam measurements presented.

  7. Surface finish measurements of diamond-turned electroless-nickel-plated mirrors

    SciTech Connect (OSTI)

    Taylor, J.S.; Syn, C.K.; Saito, T.T.; Donaldson, R.R.

    1986-09-01T23:59:59.000Z

    Surface roughness data are presented for a matrix of diamond-turned electroless nickel samples having a combination of six phosphorus contents and four heat treatments. Roughness measurements were conducted with commercial optical and stylus profilers (WYKO and Talystep). The results are discussed in terms of the material composition and heat treatment, plus other factors having an observed influence on the surface roughness. For the optimum material properties, full-length (665..mu..m) 20x WYKO scans yielded values of better than 10 A rms after correction for instrument roll-off.

  8. Surface finish measurements of diamond-turned electroless-nickel-plated mirrors

    SciTech Connect (OSTI)

    Taylor, J.S.; Syn, C.K.; Saito, T.T.; Donaldson, R.R.

    1985-08-16T23:59:59.000Z

    Surface roughness data are presented for a matrix of diamond-turned electroless-nickel samples having a combination of six phosphorous contents and four heat treatments. Roughness measurements were conducted with commercial optical and stylus profilometers (Wyko and Talystep). The results are discussed in terms of the material composition and heat treatment, plus other factors having an observed influence on the surface roughness. For the optimum material properties, full-length (665 ..mu..m) restored 20X Wyko scans yielded values of better than 10A rms.

  9. Uncle Sam Turns to SAM for Solar Modeling | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO Overview OCHCOSystems Analysis Success|Sustainable EnergyMotorUncle Sam Turns to SAM for

  10. Turn Down the Temp, But Don't Let Your Pipes Freeze! | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergyTransportation WorkDecember 28, 2004 Part IIIDepartmentTurn

  11. Turning the Manhattan Project into a National Park | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreakingMayDepartmentTest forTechnologiesTribal UtilityFebruaryTurning on the Fan

  12. Sandia National Laboratories: White Light Creation Architectures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Light Creation Architectures White Light Creation Architectures Overview of SSL White Light Creation Architectures The entire spectral range of visible light can be...

  13. Sandia National Laboratories: Lighting Developments to 2030

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ClimateLighting Developments to 2030 Lighting Developments to 2030 videobanner Lighting Technologies, Costs, and Energy Demand: Global Developments to 2030 V iew Slides: Lighting...

  14. Interior Light Level Measurements Appendix F -Interior Light Level Measurements

    E-Print Network [OSTI]

    Appendix F ­ Interior Light Level Measurements #12;F.1 Appendix F - Interior Light Level. A potential concern is that a lower VT glazing may increase electric lighting use to compensate for lost qualify and quantify a representative loss of daylighting, and therefore electric lighting use

  15. Quasi light fields: extending the light field to coherent radiation

    E-Print Network [OSTI]

    Wornell, Gregory W.

    Quasi light fields: extending the light field to coherent radiation Anthony Accardi1,2 and Gregory light field, and for coherent radiation using electromagnetic field theory. We present a model of coherent image formation that strikes a balance between the utility of the light field

  16. Smart Lighting: A Second Wave in Solid State Lighting?

    E-Print Network [OSTI]

    Salama, Khaled

    Smart Lighting: A Second Wave in Solid State Lighting? OIDA Conference on Green Photonics Bob Karlicek Director, Smart Lighting Engineering Research Center Rensselaer Polytechnic Institute June 2010 #12;2 Outline · The First Wave of Solid State Lighting · Complex Dynamics in the Supply Chain · What

  17. Strobe Light Testing and Kokanee Population Monitoring : Dworshak Dam Impacts Assessment and Fisheries Investigation Project, 97-99 : annual Progress Report for 1998.

    SciTech Connect (OSTI)

    Maiolie, Melo A.; Harryman, Bill; Ament, William J.

    1999-12-01T23:59:59.000Z

    We tested the response of kokanee Oncorhynchus nerka to strobe lights. Testing was conducted on wild, free-ranging fish in their natural environment (i.e., the pelagic region of two large Idaho lakes). Split-beam hydroacoustics were used to record the distance kokanee moved away from the lights as well as the density of kokanee in the area near the lights. In control tests, where the strobe lights were lowered into the lake but kept turned off, kokanee remained within a few meters of the lights. Once the lights began flashing, kokanee quickly moved away from the light source. Kokanee were found to move an average of 30 to 136 m away from the lights in waters with Secchi transparencies from 2.8 to 17.5 m (p=0.00 to p=0.04). Kokanee densities near the lights were significantly lower (p=0.00 to p=0.07) when the lights were turned on than in control samples with no lights flashing. Flash rates of 300, 360, and 450 flashes/min elicited strong avoidance responses from the fish. Kokanee remained at least 24 m away from the lights during our longest test that lasted for 5 h 50 min. Kokanee appeared to be responding to flashes that were well less than 0.00016 lux above background lighting.

  18. Discrete magic angle turning system, apparatus, and process for in situ magnetic resonance spectroscopy and imaging

    DOE Patents [OSTI]

    Hu, Jian Zhi (Richland, WA); Sears, Jr., Jesse A. (Kennewick, WA); Hoyt, David W. (Richland, WA); Wind, Robert A. (Kennewick, WA)

    2009-05-19T23:59:59.000Z

    Described are a "Discrete Magic Angle Turning" (DMAT) system, devices, and processes that combine advantages of both magic angle turning (MAT) and magic angle hopping (MAH) suitable, e.g., for in situ magnetic resonance spectroscopy and/or imaging. In an exemplary system, device, and process, samples are rotated in a clockwise direction followed by an anticlockwise direction of exactly the same amount. Rotation proceeds through an angle that is typically greater than about 240 degrees but less than or equal to about 360 degrees at constant speed for a time applicable to the evolution dimension. Back and forth rotation can be synchronized and repeated with a special radio frequency (RF) pulse sequence to produce an isotropic-anisotropic shift 2D correlation spectrum. The design permits tubes to be inserted into the sample container without introducing plumbing interferences, further allowing control over such conditions as temperature, pressure, flow conditions, and feed compositions, thus permitting true in-situ investigations to be carried out.

  19. SNS 2.1K Cold Box Turn-down Studies

    SciTech Connect (OSTI)

    F. Casagrande; P.A. Gurd; D.R. Hatfield; M.P. Howell; W.H. Strong; D. Arenius; J. Creel; V. Ganni; P. Knudsen

    2006-06-26T23:59:59.000Z

    The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory is nearing completion. The cold section of the Linac consists of 81 superconducting radio frequency cavities cooled to 2.1K by a 2400 watt cryogenic refrigeration system. The 2.1K cold box consists of four stages of centrifugal compressors with LN2-cooled variable speed electric motors and magnetic bearings. The cryogenic system successfully supported the Linac beam commissioning at both 4.2K and 2.1K and has been fully operational since June 2005. This paper describes the control principles utilized and the experimental results obtained for the SNS cold compressors turn-down capability to about 30% of the design flow, and possible limitation of the frequency dependent power factor of the cold compressor electric motors, which was measured for the first time during commissioning. These results helped to support the operation of the Linac over a very broad and stable cold compressor operating flow range (refrigeration capacity) and pressure. This in turn helped to optimize the cryogenic system operating parameters, minimizing the utilities and improving the system reliability and availability.

  20. Sneaky light stop

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Eifert, Till; Nachman, Benjamin

    2015-04-01T23:59:59.000Z

    A light supersymmetric top quark partner (stop) with a mass nearly degenerate with that of the standard model (SM) top quark can evade direct searches. The precise measurement of SM top properties such as the cross-section has been suggested to give a handle for this ‘stealth stop’ scenario. We present an estimate of the potential impact a light stop may have on top quark mass measurements. The results indicate that certain light stop models may induce a bias of up to a few GeV, and that this effect can hide the shift in, and hence sensitivity from, cross-section measurements. Duemore »to the different initial states, the size of the bias is slightly different between the LHC and the Tevatron. The studies make some simplifying assumptions for the top quark measurement technique, and are based on truth-level samples.« less

  1. Pupillary efficient lighting system

    DOE Patents [OSTI]

    Berman, Samuel M. (San Francisco, CA); Jewett, Don L. (Mill Valley, CA)

    1991-01-01T23:59:59.000Z

    A lighting system having at least two independent lighting subsystems each with a different ratio of scotopic illumination to photopic illumination. The radiant energy in the visible region of the spectrum of the lighting subsystems can be adjusted relative to each other so that the total scotopic illumination of the combined system and the total photopic illumination of the combined system can be varied independently. The dilation or contraction of the pupil of an eye is controlled by the level of scotopic illumination and because the scotopic and photopic illumination can be separately controlled, the system allows the pupil size to be varied independently of the level of photopic illumination. Hence, the vision process can be improved for a given level of photopic illumination.

  2. Light emitting ceramic device

    DOE Patents [OSTI]

    Valentine, Paul; Edwards, Doreen D.; Walker, Jr., William John; Slack, Lyle H.; Brown, Wayne Douglas; Osborne, Cathy; Norton, Michael; Begley, Richard

    2010-05-18T23:59:59.000Z

    A light-emitting ceramic based panel, hereafter termed "electroceramescent" panel, is herein claimed. The electroceramescent panel is formed on a substrate providing mechanical support as well as serving as the base electrode for the device. One or more semiconductive ceramic layers directly overlay the substrate, and electrical conductivity and ionic diffusion are controlled. Light emitting regions overlay the semiconductive ceramic layers, and said regions consist sequentially of a layer of a ceramic insulation layer and an electroluminescent layer, comprised of doped phosphors or the equivalent. One or more conductive top electrode layers having optically transmissive areas overlay the light emitting regions, and a multi-layered top barrier cover comprising one or more optically transmissive non-combustible insulation layers overlay said top electrode regions.

  3. Light harvesting arrays

    DOE Patents [OSTI]

    Lindsey, Jonathan S. (Raleigh, NC)

    2002-01-01T23:59:59.000Z

    A light harvesting array useful for the manufacture of devices such as solar cells comprises: (a) a first substrate comprising a first electrode; and (b) a layer of light harvesting rods electrically coupled to the first electrode, each of the light harvesting rods comprising a polymer of Formula I: X.sup.1.paren open-st.X.sup.m+1).sub.m (I) wherein m is at least 1, and may be from two, three or four to 20 or more; X.sup.1 is a charge separation group (and preferably a porphyrinic macrocycle, which may be one ligand of a double-decker sandwich compound) having an excited-state of energy equal to or lower than that of X.sup.2, and X.sup.2 through X.sup.m+1 are chromophores (and again are preferably porphyrinic macrocycles).

  4. MANDATORY MEASURES INDOOR LIGHTING CONTROLS

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES INDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.1) #12;SECTION 4 MANDATORY LIGHTING CONTROLS 1. 130.1 (a) Area Controls: Manual controls that control lighting in each area separately 2. 130.1 (b) Multi-level Controls: Allow occupants to choose the appropriate light level for each

  5. MANDATORY MEASURES INDOOR LIGHTING CONTROLS

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES INDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.1) #12;SECTION 3 MANDATORY LIGHTING CONTROLS 1. 130.1 (a) Area Controls: Manual controls that control lighting in each area separately 2. 130.1 (b) Multi-level Controls: "Dimmability." Allow occupants to choose the appropriate light

  6. MANDATORY MEASURES INDOOR LIGHTING CONTROLS

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES INDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.1) #12;SECTION 5 MANDATORY LIGHTING CONTROLS 1. Area Controls: Manual controls that control lighting in each area separately 2. Multi-level Controls: Allow occupants to choose the appropriate light level for each area 3. Shut

  7. LIGHTING 101 1. Common terminology

    E-Print Network [OSTI]

    California at Davis, University of

    SECTION 3 LIGHTING 101 1. Common terminology 2. Sources & luminaires 3. Controls #12;SECTION 3SECTION 3 DISCUSSION: COMMON LIGHTING TERMINOLOGY 1. What are the definitions of the following lighting terms? 2. Do you use these terms in professional practice? 3. What other lighting terminology do you use

  8. LIGHTING 101 1. Common terminology

    E-Print Network [OSTI]

    California at Davis, University of

    LIGHTING 101 1. Common terminology 2. Sources and luminaires 3. Controls #12;SECTION 2 DISCUSSION: COMMON LIGHTING TERMINOLOGY 1. What are the definitions of the following lighting terms? 2. Do you use these terms in professional practice? 3. What other lighting terminology do you use on the job? SLIDE 14

  9. Radioluminescent lighting technology

    SciTech Connect (OSTI)

    Not Available

    1990-01-01T23:59:59.000Z

    The glow-in-the-dark stereotype that characterizes the popular image of nuclear materials is not accidental. When the French scientist, Henri Becquerel, first discovered radioactivity in 1896, he was interested in luminescence. Radioluminescence, the production of light from a mixture of energetic and passive materials, is probably the oldest practical application of the unstable nucleus. Tritium-based radioluminescent lighting, in spite of the biologically favorable character of the gaseous tritium isotope, was included in the general tightening of environmental and safety regulations. Tritium light manufacturers would have to meet two fundamental conditions: (1) The benefit clearly outweighed the risk, to the extent that even the perceived risk of a skeptical public would be overcome. (2) The need was significant enough that the customer/user would be willing and able to afford the cost of regulation that was imposed both in the manufacture, use and eventual disposal of nuclear materials. In 1981, researchers at Oak Ridge National Laboratory were investigating larger radioluminescent applications using byproduct nuclear material such as krypton-85, as well as tritium. By 1982, it appeared that large source, (100 Curies or more) tritium gas tube, lights might be useful for marking runways and drop zones for military operations and perhaps even special civilian aviation applications. The successful development of this idea depended on making the light bright enough and demonstrating that large gas tube sources could be used and maintained safely in the environment. This successful DOE program is now in the process of being completed and closed-out. Working closely with the tritium light industry, State governments and other Federal agencies, the basic program goals have been achieved. This is a detailed report of what they have learned, proven, and discovered. 91 refs., 29 figs., 5 tabs. (JF)

  10. CX-006564: Categorical Exclusion Determination | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    3) retrofit outdoor lighting, traffic signals, and lighted street signs with light emitting diode bulbs and replace indoor light fixtures in the Esther Snyder Community Center...

  11. U.S. Department of Energy NEPA Categorical Exclusion Determination...

    Broader source: Energy.gov (indexed) [DOE]

    3) retrofit outdoor lighting, traffic signals, and lighted street signs with light emitting diode bulbs and replace indoor light fixtures in the Esther Snyder Community Center...

  12. CX-004962: Categorical Exclusion Determination | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    halide light fixtures in the City Hall and Community Center parking lots with light-emitting diode (LED) light fixtures; and 3) replace incandescent light bulbs on traffic...

  13. Wesley C. Salmon You awaken to the soundofyour alarmclock; you getoutofbed to turn itoff. Causal

    E-Print Network [OSTI]

    Fitelson, Branden

    in virtu- ally everythmg anyone does, day in and day out, year in and year out. Down the street, causing a bunch of lights to go on. At the city morgue, a forensic pathologist tries to figure out what life exist out there beyond the confines of our solar system. So what's the big problem?We all

  14. Windows and lighting program

    SciTech Connect (OSTI)

    Not Available

    1990-06-01T23:59:59.000Z

    More than 30% of all energy use in buildings is attributable to two sources: windows and lighting. Together they account for annual consumer energy expenditures of more than $50 billion. Each affects not only energy use by other major building systems, but also comfort and productivity -- factors that influence building economics far more than does direct energy consumption alone. Windows play a unique role in the building envelope, physically separating the conditioned space from the world outside without sacrificing vital visual contact. Throughout the indoor environment, lighting systems facilitate a variety of tasks associated with a wide range of visual requirements while defining the luminous qualities of the indoor environment. Windows and lighting are thus essential components of any comprehensive building science program. Despite important achievements in reducing building energy consumption over the past decade, significant additional savings are still possible. These will come from two complementary strategies: (1) improve building designs so that they effectively apply existing technologies and extend the market penetration of these technologies; and (2) develop advanced technologies that increase the savings potential of each application. Both the Windows and Daylighting Group and the Lighting System Research Group have made substantial contributions in each of these areas, and continue to do so through the ongoing research summarized here. 23 refs., 16 figs.

  15. AIRPORT LIGHTING Session Highlights

    E-Print Network [OSTI]

    Minnesota, University of

    Administration advisory circulars, available online at www.faa.gov or by mail at the following address: Federal Aviation Administration, Airports 800 Independence Ave. S.W. Washington, D.C. 20591 To qualify for federal AND NAVIGATIONAL AIDS A complete list of federal regulations for airfield lighting is located in Federal Aviation

  16. Tokyo Street Lights

    E-Print Network [OSTI]

    Hacker, Randi; Tsutsui, William

    2008-03-12T23:59:59.000Z

    that you have only 17, no 16, no 15 seconds left to get to the other side before the light changes and the impatient American drivers put the pedal to the metal and it's road kill time. Talk about stress! In Tokyo, crossing the street is a leisurely...

  17. Sweetness and light 

    E-Print Network [OSTI]

    Craig, Katie

    2014-07-03T23:59:59.000Z

    1. Sweetness and Light. A novel. Judi lives in a nice, clean house with her seventeen year old stepson, who won’t talk to her in anything but monosyllables. His father, Nelson, and she are struggling to relate to each ...

  18. Design of diamond turned holograms by the nonlinear conjugate gradients method Colin Dankwart, Claas Falldorf and Jurgen Jahns

    E-Print Network [OSTI]

    Jahns, Jürgen

    Design of diamond turned holograms by the nonlinear conjugate gradients method Colin Dankwart investigate a different optimization approach, the nonlinear conjugate gradients (NCG) method. The NGC method design algorithm, based on the generalized projections method (GPM) [?] was established, taking

  19. Turn-on fluorescence in tetraphenylethylene-based metal-organic frameworks: An alternative to aggregation-induced emission

    E-Print Network [OSTI]

    Shustova, Natalia B.

    Coordinative immobilization of functionalized tetraphenylethylene within rigid porous metal–organic frameworks (MOFs) turns on fluorescence in the typically non-emissive tetraphenylethylene core. The matrix coordination-induced ...

  20. Design of an 8 GeV h transport and multi-turn injection system

    SciTech Connect (OSTI)

    Johnson, D.E.; /Fermilab

    2006-08-01T23:59:59.000Z

    An 8 GeV superconducting linear accelerator (SCL) has been proposed as a single stage H{sup -} injector into the Main Injector (MI) synchrotron. This could be a multi-use facility which would, among other things, support a 2 MW Neutrino program at Fermi National Accelerator Lab (FNAL) [1,2,3,4]. This paper describes a solution for a transport line which is capable of low loss transmission of an H{sup -} beam from the linac to the MI, transverse and momentum collimation, and provides for flexible matching into the MI lattice. The required modifications to the MI accelerator complex to accommodate the transfer line and multi-turn injection utilizing carbon foil stripping (and/or potentially laser stripping) and the injection layout are discussed.

  1. PC and monitor night status: Power management enabling and manual turn-off

    SciTech Connect (OSTI)

    Nordman, Bruce; Meier, Alan; Piette, Mary Ann

    1998-07-30T23:59:59.000Z

    While office equipment accounts for about 7 percent of commercial building energy use, this reflects considerable energy savings from the use of automatic power management. Most of these savings were gained through the use of low-power modes that meet the criteria of the U.S. EPA's Energy Star program. Despite this success, there are large amounts of additional savings that could be gained if all equipment capable of power management use were enabled and functioning. A considerable portion of equipment is not enabled for power management at all, enabled only partially, or is enabled but prevented from functioning. Additional savings could be gained if more equipment were turned off at night manually. We compiled results from 17 studies from the office equipment literature addressing PCs and monitors. Some factors important for annual energy use, such as power levels, have been documented elsewhere and are not covered. We review methods for estimating office equipment use patterns and energy use, and present findings on night status--power management and manual turn-off rates. In early studies, PC power management was often found to function in 25 percent or less of the Energy Star compliant units (10 percent of all PCs). However, recent assessments have found higher rates, and we estimate that for Energy Star models, 35 percent of PC CPUs and 65 percent of PC monitors are enabled for power management. While the data lack statistical rigor, they can be used to estimate the magnitude of current and potential power management savings, which we did for major types of office equipment. The data also make clear that the topic of enabling rates, and the factors which influence them, deserve greater scrutiny.

  2. REDUCTIONS WITHOUT REGRET: AVOIDING WRONG TURNS, ROACH MOTELS, AND BOX CANYONS

    SciTech Connect (OSTI)

    Swegle, J.; Tincher, D.

    2013-09-11T23:59:59.000Z

    This is the third of three papers (in addition to an introductory summary) aimed at providing a framework for evaluating future reductions or modifications of the U.S. nuclear force, first by considering previous instances in which nuclear-force capabilities were eliminated; second by looking forward into at least the foreseeable future at the features of global and regional deterrence (recognizing that new weapon systems currently projected will have expected lifetimes stretching beyond our ability to predict the future); and third by providing examples of past or possible undesirable outcomes in the shaping of the future nuclear force, as well as some closing thoughts for the future. In this paper, we provide one example each of our judgments on what constitutes a box canyon, a roach motel, and a wrong turn: ? Wrong Turn: The Reliable Replacement Warhead ? Roach Motel: SRAM T vs the B61 ? A Possible Box Canyon: A Low-Yield Version of the W76 SLBM Warhead Recognizing that new nuclear missions or weapons are not demanded by current circumstances ? a development path that yields future capabilities similar to those of today, which are adequate if not always ideal, and a broader national-security strategy that supports nonproliferation and arms control by reducing the role for, and numbers, of nuclear weapons ? we briefly consider alternate, less desirable futures, and their possible effect on the complex problem of regional deterrence. In this regard, we discuss the issues posed by, and possible responses to, three example regional deterrence challenges: in-country defensive use of nuclear weapons by an adversary; reassurance of U.S. allies with limited strategic depth threatened by an emergent nuclear power; and extraterritorial, non-strategic offensive use of nuclear weapons by an adversary in support of limited military objectives against a U.S. ally.

  3. Hybrid optics for the visible produced by bulk casting of sol-gel glass using diamond-turned molds

    SciTech Connect (OSTI)

    Bernacki, B.E.; Miller, A.C.; Maxey, L.C.; Cunningham, J.P. [Oak Ridge National Lab., TN (United States); Moreshead, W.V.; Nogues, J.L.R. [Geltech Inc., Alachua, FL (United States)

    1995-07-01T23:59:59.000Z

    Recent combinations of diffractive and refractive functions in the same optical component allow designers additional opportunities to make systems more compact and enhance performance. This paper describes a research program for fabricating hybrid refractive/diffractive components from diamond-turned molds using the bulk casting of sol-gel silica glass. The authors use the complementary dispersive nature of refractive and diffractive optics to render two-color correction in a single hybrid optical element. Since diamond turning has matured as a deterministic manufacturing technology, techniques previously suitable only in the infrared are now being applied to components used at visible wavelengths. Thus, the marriage of diamond turning and sol-gel processes offers a cost-effective method for producing highly customized and specialized optical components in high quality silica glass. With the sol-gel casting method of replication, diamond-turned mold costs can be shared over many pieces. Diamond turning takes advantage of all of the available degrees of freedom in a single hybrid optical element: aspheric surface to eliminate spherical aberration, kinoform surface for control of primary chromatic aberration, and the flexibility to place the kinoform on non-planar surfaces for maximum design flexibility. The authors discuss the critical issues involved in designing the hybrid element, single point diamond-turning the mold, and fabrication in glass using the sol-gel process.

  4. Transformations in Lighting: The Ninth Annual Solid-State Lighting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in DOE's "Transformations in Lighting" Solid-State Lighting (SSL) R&D Workshop. DOE SSL Portfolio Manager James Brodrick kicked off Day 1 by observing that although LED...

  5. Sample Exam 2 Phys 121 Number 6 Spring 2013 1. Identical 2.0-C charges are located on the vertices of a square with sides that are 2.0 m in length. Determine the electric potential

    E-Print Network [OSTI]

    Janow, Rich

    conductor is A) B) R C) R D) 3R E) 9R 16. Light bulb A is rated at 60 W and light bulb B is rated at 100 W. Both are designed to operate at 110 V. Which statement is correct? A) The 60 W bulb has a greater resistance and greater current than the 100 W bulb. B) The 60 W bulb has a greater resistance and smaller

  6. Electroluminescence property of organic light emitting diode (OLED)

    SciTech Connect (OSTI)

    Özdemir, Orhan; Kavak, Pelin; Saatci, A. Evrim; Gökdemir, F. P?nar; Menda, U. Deneb; Can, Nursel; Kutlu, Kubilay [Y?ld?z Technical University, Department of Physics, Esenler, Istanbul (Turkey); Tekin, Emine; Pravadal?, Selin [National Metrology Inst?tute of Turkey (TUB?TAK-UME), Kocaeli (Turkey)

    2013-12-16T23:59:59.000Z

    Transport properties of electrons and holes were investigated not only in a anthracene-containing poly(p-phenylene-ethynylene)- alt - poly(p-phenylene-vinylene) (PPE-PPV) polymer (AnE-PVstat) light emitting diodes (OLED) but also in an ITO/Ag/polymer/Ag electron and ITO/PEDOT:PSS/polymer/Au hole only devices. Mobility of injected carriers followed the Poole-Frenkel type conduction mechanism and distinguished in the frequency range due to the difference of transit times in admittance measurement. Beginning of light output took place at the turn-on voltage (or flat band voltage), 1.8 V, which was the difference of energy band gap of polymer and two barrier offsets between metals and polymer.

  7. Light cone matrix product

    SciTech Connect (OSTI)

    Hastings, Matthew B [Los Alamos National Laboratory

    2009-01-01T23:59:59.000Z

    We show how to combine the light-cone and matrix product algorithms to simulate quantum systems far from equilibrium for long times. For the case of the XXZ spin chain at {Delta} = 0.5, we simulate to a time of {approx} 22.5. While part of the long simulation time is due to the use of the light-cone method, we also describe a modification of the infinite time-evolving bond decimation algorithm with improved numerical stability, and we describe how to incorporate symmetry into this algorithm. While statistical sampling error means that we are not yet able to make a definite statement, the behavior of the simulation at long times indicates the appearance of either 'revivals' in the order parameter as predicted by Hastings and Levitov (e-print arXiv:0806.4283) or of a distinct shoulder in the decay of the order parameter.

  8. Nonequilibrium lighting plasmas

    SciTech Connect (OSTI)

    Dakin, J.T. (GE Lighting, Nela Park, Cleveland, OH (US))

    1991-12-01T23:59:59.000Z

    In this paper the science of a variety of devices employing nonequilibrium lighting plasmas is reviewed. The devices include the fluorescent lamp, the low-pressure sodium lamp, the neon sign, ultraviolet lamps, glow indicators, and a variety of devices used by spectroscopists, such as the hollow cathode light source. The plasma conditions in representative commercial devices are described. Recent research on the electron gas, the role of heavy particles, spatial and temporal inhomogeneities, and new electrodeless excitation schemes is reviewed. Areas of future activity are expected to be in new applications of high-frequency electronics to commercial devices, new laser-based diagnostics of plasma conditions, and more sophisticated models requiring more reliable and extensive rate coefficient data.

  9. The Advanced Light Source

    SciTech Connect (OSTI)

    Jackson, A.

    1991-05-01T23:59:59.000Z

    The Advanced Light Source (ALS), a national user facility currently under construction at the Lawrence Berkeley Laboratory (LBL), is a third-generation synchrotron light source designed to produce extremely bright beams of synchrotron radiation in the energy range from a few eV to 10 keV. The design is based on a 1--1.9-GeV electron storage ring (optimized at 1.5 GeV), and utilizes special magnets, known as undulators and wigglers (collectively referred to as insertion devices), to generate the radiation. The facility is scheduled to begin operating in April 1993. In this paper we describe the progress in the design, construction, and commissioning of the accelerator systems, insertion devices, and beamlines. Companion presentations at this conference give more detail of specific components in the ALS, and describe the activities towards establishing an exciting user program. 3 figs., 2 tabs.

  10. Scattering Of Light Nuclei

    SciTech Connect (OSTI)

    Quaglioni, S; Navratil, P; Roth, R

    2009-12-15T23:59:59.000Z

    The exact treatment of nuclei starting from the constituent nucleons and the fundamental interactions among them has been a long-standing goal in nuclear physics. Above all nuclear scattering and reactions, which require the solution of the many-body quantum-mechanical problem in the continuum, represent an extraordinary theoretical as well as computational challenge for ab initio approaches.We present a new ab initio many-body approach which derives from the combination of the ab initio no-core shell model with the resonating-group method [4]. By complementing a microscopic cluster technique with the use of realistic interactions, and a microscopic and consistent description of the nucleon clusters, this approach is capable of describing simultaneously both bound and scattering states in light nuclei. We will discuss applications to neutron and proton scattering on sand light p-shell nuclei using realistic nucleon-nucleon potentials, and outline the progress toward the treatment of more complex reactions.

  11. Fusion pumped light source

    DOE Patents [OSTI]

    Pappas, Daniel S. (Los Alamos, NM)

    1989-01-01T23:59:59.000Z

    Apparatus is provided for generating energy in the form of light radiation. A fusion reactor is provided for generating a long, or continuous, pulse of high-energy neutrons. The neutron flux is coupled directly with the lasing medium. The lasing medium includes a first component selected from Group O of the periodic table of the elements and having a high inelastic scattering cross section. Gamma radiation from the inelastic scattering reactions interacts with the first component to excite the first component, which decays by photon emission at a first output wavelength. The first output wavelength may be shifted to a second output wavelength using a second liquid component responsive to the first output wavelength. The light outputs may be converted to a coherent laser output by incorporating conventional optics adjacent the laser medium.

  12. Turbo-Charged Lighting Design

    E-Print Network [OSTI]

    Clark, W. H. II

    TURBO-CHARGED LIGHTING DESIGN William H. Clark II Design Engineer O'Connell Robertson & Assoc Austin/ Texas ABSTRACT The task of the lighting designer has become very complex, involving thousands of choices for fixture types and hundreds...

  13. Local heat transfer distribution in a two-pass trapezoidal channel with a 180 [degree] turn via transient liquid crystal technique

    E-Print Network [OSTI]

    Endley, Saurabh

    1996-01-01T23:59:59.000Z

    cross section. Attention is focused on the effect of the 180' turn on the local heat transfer distributions on the interior surfaces of the various walls at the turn, under turbulent flow conditions. Transient heat transfer experiments, using...

  14. Energymaster Desiccant System Application to Light Commercial Buildings

    E-Print Network [OSTI]

    Blanpied, M. C.; Coellner, J. A.; Macintosh, D. S.

    1987-01-01T23:59:59.000Z

    in representative cities are: New Orleans 72 - 80F Chicago 50 - 76F Cas Vegas 53 - 68F The fact that wet bulbs remain in a narrow band at high levels means the air conditioninq loads are high and continuous over the coollnq season. In addition humid climates...

  15. Webinar: Fuel Cell Mobile Lighting

    Broader source: Energy.gov [DOE]

    Video recording of the Fuel Cell Technologies Office webinar, Fuel Cell Mobile Lighting, originally presented on November 13, 2012.

  16. Faster than Light Quantum Communication

    E-Print Network [OSTI]

    A. Y. Shiekh

    2008-04-05T23:59:59.000Z

    Faster than light communication might be possible using the collapse of the quantum wave-function without any accompanying paradoxes.

  17. Table lamp with dynamically controlled lighting distribution and uniformly illuminated luminous shade

    DOE Patents [OSTI]

    Siminovitch, Michael J. (Pinole, CA); Page, Erik R. (Berkeley, CA)

    2002-01-01T23:59:59.000Z

    A double lamp table or floor lamp lighting system has a pair of compact fluorescent lamps (CFLs) or other lamps arranged vertically, i.e. one lamp above the other, with a reflective septum in between. By selectively turning on one or both of the CFLs, down lighting, up lighting, or both up and down lighting is produced. The control system can also vary the light intensity from each CFL. The reflective septum ensures that almost all the light produced by each lamp will be directed into the desired light distribution pattern which is selected and easily changed by the user. In a particular configuration, the reflective septum is bowl shaped, with the upper CFL sitting in the bowl, and a luminous shade hanging down from the bowl. The lower CFL provides both task lighting and uniform shade luminance. Planar compact fluorescent lamps, e.g. circular CFLs, particularly oriented horizontally, are preferable. CFLs provide energy efficiency. However, other types of lamps, including incandescent, halogen, and LEDs can also be used in the fixture. The lighting system may be designed for the home, hospitality, office or other environments.

  18. MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.2) #12;SECTION level of each multi-tier garage. · General lighting must have occupant sensing controls with at least one control step between 20% and 50% of design lighting power · No more than 500 watts of rated

  19. MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.2) #12;SECTION 5 Additions and Alterations Any alteration that increases the connected lighting load must meet all No measures required OUTDOOR LIGHTING11/20/2014 #12;SECTION 5 BACKLIGHT, UPLIGHT, AND GLARE (BUG) RATINGS

  20. STATE OF CALIFORNIA RESIDENTIAL LIGHTING

    E-Print Network [OSTI]

    STATE OF CALIFORNIA RESIDENTIAL LIGHTING CEC-CF-6R-LTG-01 (Revised 08/09) CALIFORNIA ENERGY COMMISSION INSTALLATION CERTIFICATE CF-6R-LTG-01 Residential Lighting (Page 1 of 6) Site Address: Enforcement Agency: Permit Number: 2008 Residential Compliance Forms August 2009 1. Kitchen Lighting Does project

  1. Arnold Schwarzenegger, LIGHTING RESEARCH PROGRAM

    E-Print Network [OSTI]

    ;#12;Prepared By: Lighting Research Center Andrew Bierman, Project Lead Troy, New York 12180 Managed ByArnold Schwarzenegger, Governor LIGHTING RESEARCH PROGRAM PROJECT 3.2 ENERGY EFFICIENT LOAD- SHEDDING LIGHTING TECHNOLOGY Prepared For: California Energy Commission Public Interest Energy Research

  2. Slow-light solitons revisited

    E-Print Network [OSTI]

    A. V. Rybin; I. P. Vadeiko; A. R. Bishop

    2006-08-16T23:59:59.000Z

    We investigate propagation of slow-light solitons in atomic media described by the nonlinear $\\Lambda$-model. Under a physical assumption, appropriate to the slow light propagation, we reduce the $\\Lambda$-scheme to a simplified nonlinear model, which is also relevant to 2D dilatonic gravity. Exact solutions describing various regimes of stopping slow-light solitons can then be readily derived.

  3. DOE/LX/07-0326&D1 Secondary Document DMSA C-337-04 Solid Waste...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    cans, light bulbs and starters, a light bulb end, and a tube of polyvinyl chloride (PVC) glue. Since the RCRA wastes were radiologically contaminated and were removed from PCB...

  4. Energy Blog | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    light bulbs can drive up electricity bills and drain homeowners' wallets. With that in mind, government officials in the east Texas city of Longview established a light bulb swap...

  5. Sandia National Laboratories: efficient LED lighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Partnership, Research & Capabilities, Solid-State Lighting Solid state lighting (SSL), which uses light-emitting diodes (LEDs), has the potential to be 10 times more energy...

  6. Sandia National Laboratories: Light Creation Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    TechnologiesLight Creation Materials Light Creation Materials Overview of SSL Light Creation Materials Different families of inorganic semiconductor materials can...

  7. Ecological Consequences of Artificial Night Lighting

    E-Print Network [OSTI]

    Piselli, Kathy

    2006-01-01T23:59:59.000Z

    of Artificial Night Lighting Catherine Rich and Travisof artificial night lighting. This book provides editedage of modern urban lighting was ushered in. Coincidentally,

  8. Sandia National Laboratories: Solid-State Lighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lighting Developments to 2030 On July 30, 2012, in Lighting Technologies, Costs, and Energy Demand: Global Developments to 2030 View Slides: Lighting Technologies, Costs, and...

  9. LIGHTING CONTROLS: SURVEY OF MARKET POTENTIAL

    E-Print Network [OSTI]

    Verderber, R.R.

    2010-01-01T23:59:59.000Z

    REFERENCES Task Report to Lighting Systems Research,Berkeley Laboratory, "Lighting Control System Market1980). Task Report to Lighting Systems Research, Lawrence

  10. Demand Responsive Lighting: A Scoping Study

    E-Print Network [OSTI]

    Rubinstein, Francis; Kiliccote, Sila

    2007-01-01T23:59:59.000Z

    3 3.0 Previous Experience with Demand Responsive Lighting11 4.3. Prevalence of Lighting13 4.4. Impact of Title 24 on Lighting

  11. Municipal Consortium LED Street Lighting Workshop Presentations...

    Broader source: Energy.gov (indexed) [DOE]

    A Rational View of LM-79 Reports, IES Files, and Product Variation Gary Steinberg, GE Lighting Solutions Solid-State Street Lighting: Calculating Light Loss Factors Dana Beckwith,...

  12. Municipal Consortium LED Street Lighting Workshop Presentations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    National Association of Energy Services Companies Calculating Light Loss Factors for Solid-State Lighting Systems Chad Stalker, Philips Lumileds Lighting Intro to MSSLC's...

  13. Light propagation and Imaging in Indefinite Metamaterials

    E-Print Network [OSTI]

    Yao, Jie

    2010-01-01T23:59:59.000Z

    photolithography by polarized light,” Applied PhysicsZhang, “Imaging visible light using anisotropic metamaterialcross-sectional review of the light propagation of TE mode (

  14. Advances in Lighting

    E-Print Network [OSTI]

    Tumber, A. J.

    1981-01-01T23:59:59.000Z

    colour rendition. The quartz-halogen incandescent lam s operate at higher temperatures, and have a somewhat higher efficacy, but they are rarely used except for special applicati ns. 3-2 High Intensity Discharge Lamps. Mercury is the grandfather... of the H.I.D. lamps. Its blue-green light, has been used almost exclusively for streetlighti and, often with colour-improving phospho it is still being used in industrial and commercial applications. Reactor-type ballasted mercury lamps can now...

  15. Pedestrian Friendly Outdoor Lighting

    SciTech Connect (OSTI)

    Miller, Naomi J.; Koltai, Rita; McGowan, Terry

    2013-12-31T23:59:59.000Z

    This GATEWAY report discusses the problems of pedestrian lighting that occur with all technologies with a focus on the unique optical options and opportunities offered by LEDs through the findings from two pedestrian-focused projects, one at Stanford University in California, and one at the Chautauqua Institution in upstate New York. Incorporating user feedback this report reviews the tradeoffs that must be weighed among visual comfort, color, visibility, efficacy and other factors to stimulate discussion among specifiers, users, energy specialists, and in industry in hopes that new approaches, metrics, and standards can be developed to support pedestrian-focused communities, while reducing energy use.

  16. Lighting Test Facilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electron 9 5Let us countLighting Sign In About

  17. Lighting | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |Jilin ZhongdiantouLichuan City Yujiang River ValleyLighting

  18. Turning point temperature and competition between relativistic and ponderomotive effects in self-focusing of laser beam in plasma

    SciTech Connect (OSTI)

    Bokaei, B.; Niknam, A. R. [Laser and Plasma Research Institute, Shahid Beheshti University, G.C., Tehran (Iran, Islamic Republic of)] [Laser and Plasma Research Institute, Shahid Beheshti University, G.C., Tehran (Iran, Islamic Republic of); Jafari Milani, M. R. [Plasma Physics Research School, Tehran (Iran, Islamic Republic of)] [Plasma Physics Research School, Tehran (Iran, Islamic Republic of)

    2013-10-15T23:59:59.000Z

    The propagation characters of Gaussian laser beam in collisionless plasma are investigated by considering the ponderomotive and relativistic nonlinearities. The second-order differential equation of dimensionless beam width parameter is solved numerically, taking into account the effect of electron temperature. The results show that the ponderomotive force does not facilitate the relativistic self-focusing in all intensity ranges. In fact, there exists a certain intensity value that, if below this value, the ponderomotive nonlinearity can contribute to the relativistic self-focusing, or obstruct it, if above. It is also indicated that there is a temperature interval in which self-focusing can occur, while the beam diverges outside of this region. In addition, the results represent the existence of a “turning point temperature” in the mentioned interval that the self-focusing has the strongest power. The value of the turning point is dependent on laser intensity in which higher intensities result in higher turning point.

  19. Probing the outer edge of an accretion disk: A Her X-1 turn-on observed with RXTE

    E-Print Network [OSTI]

    M. Kuster; J. Wilms; R. Staubert; W. A. Heindl; R. E. Rothschild; N. I. Shakura; K. A. Postnov

    2005-07-08T23:59:59.000Z

    We present the analysis of Rossi X-ray Timing Explorer (RXTE) observations of the turn-on phase of a 35 day cycle of the X-ray binary Her X-1. During the early phases of the turn-on, the energy spectrum is composed of X-rays scattered into the line of sight plus heavily absorbed X-rays. The energy spectra in the 3-17 keV range can be described by a partial covering model, where one of the components is influenced by photoelectric absorption and Thomson scattering in cold material plus an iron emission line at 6.5 keV. In this paper we show the evolution of spectral parameters as well as the evolution of the pulse profile during the turn-on. We describe this evolution using Monte Carlo simulations which self-consistently describe the evolution of the X-ray pulse profile and of the energy spectrum.

  20. SUPERNOVA LIGHT CURVES POWERED BY FALLBACK ACCRETION

    SciTech Connect (OSTI)

    Dexter, Jason; Kasen, Daniel, E-mail: jdexter@berkeley.edu [Departments of Physics and Astronomy, University of California, Berkeley, CA 94720 (United States)

    2013-07-20T23:59:59.000Z

    Some fraction of the material ejected in a core collapse supernova explosion may remain bound to the compact remnant, and eventually turn around and fall back. We show that the late time ({approx}>days) power potentially associated with the accretion of this 'fallback' material could significantly affect the optical light curve, in some cases producing super-luminous or otherwise peculiar supernovae. We use spherically symmetric hydrodynamical models to estimate the accretion rate at late times for a range of progenitor masses and radii and explosion energies. The accretion rate onto the proto-neutron star or black hole decreases as M-dot {proportional_to}t{sup -5/3} at late times, but its normalization can be significantly enhanced at low explosion energies, in very massive stars, or if a strong reverse shock wave forms at the helium/hydrogen interface in the progenitor. If the resulting super-Eddington accretion drives an outflow which thermalizes in the outgoing ejecta, the supernova debris will be re-energized at a time when photons can diffuse out efficiently. The resulting light curves are different and more diverse than previous fallback supernova models which ignored the input of accretion power and produced short-lived, dim transients. The possible outcomes when fallback accretion power is significant include super-luminous ({approx}> 10{sup 44} erg s{sup -1}) Type II events of both short and long durations, as well as luminous Type I events from compact stars that may have experienced significant mass loss. Accretion power may unbind the remaining infalling material, causing a sudden decrease in the brightness of some long duration Type II events. This scenario may be relevant for explaining some of the recently discovered classes of peculiar and rare supernovae.

  1. Full phosphorescent white-light organic light-emitting diodes with improved color stability and efficiency by fine tuning primary emission contributions

    SciTech Connect (OSTI)

    Hua, Wang, E-mail: wmsu2008@sinano.ac.cn, E-mail: wanghua001@tyut.edu.cn; Du, Xiaogang [Key Laboratory of Interface Science and Engineering in Advanced Materials, Taiyuan University of Technology, Ministry of Education, Taiyuan 030024 (China) [Key Laboratory of Interface Science and Engineering in Advanced Materials, Taiyuan University of Technology, Ministry of Education, Taiyuan 030024 (China); Research Center of Advanced Materials Science and Technology, Taiyuan University of Technology, Taiyuan 030024 (China); Su, Wenming, E-mail: wmsu2008@sinano.ac.cn, E-mail: wanghua001@tyut.edu.cn; Zhang, Dongyu [Printable Electronics Research Centre, Suzhou Institute of Nano-Tech and Nano-Bionics, CAS, suzhou 215123 (China)] [Printable Electronics Research Centre, Suzhou Institute of Nano-Tech and Nano-Bionics, CAS, suzhou 215123 (China); Lin, Wenjing [Key Laboratory of Interface Science and Engineering in Advanced Materials, Taiyuan University of Technology, Ministry of Education, Taiyuan 030024 (China) [Key Laboratory of Interface Science and Engineering in Advanced Materials, Taiyuan University of Technology, Ministry of Education, Taiyuan 030024 (China); Research Center of Advanced Materials Science and Technology, Taiyuan University of Technology, Taiyuan 030024 (China); Printable Electronics Research Centre, Suzhou Institute of Nano-Tech and Nano-Bionics, CAS, suzhou 215123 (China)

    2014-02-15T23:59:59.000Z

    In this paper, a novel type of white-light organic light emitting diode (OLED) with high color stability was reported, in which the yellow-light emission layer of (4,4{sup ?}-N,N{sup ?}-dicarbazole)biphenyl (CBP) : tris(2-phenylquinoline-C2,N{sup ?})iridium(III) (Ir(2-phq){sub 3}) was sandwiched by double blue-light emission layers of 1,1-bis-[(di-4-tolylamino)pheny1]cyclohexane (TAPC) : bis[4,6-(di-fluorophenyl)-pyridinato-N,C2{sup ?}]picolinate (FIrpic) and tris[3-(3-pyridyl)mesityl]borane (3TPYMB):FIrpic. And, it exhibited the maximum current efficiency of 33.1 cd/A, the turn-on voltage at about 3 V and the maximum luminance in excess of 20000 cd/m{sup 2}. More important, it realized very stable white-light emission, and its CIE(x, y) coordinates only shift from (0.34, 0.37) to (0.33, 0.37) as applied voltage increased from 5 V to 12 V. It is believed that the new scheme in emission layer of white-light OLED can fine tune the contribution of primary emission with applied voltage changed, resulting in high quality white-light OLED.

  2. what goes here? Beverages

    E-Print Network [OSTI]

    de Lijser, Peter

    · Chemicals · Solvents (gas,antifreeze) · Fluorescent light tubes & bulbs · Lubricants & motor oil · Oil

  3. Posters | Posters --721 Exploring lighting cultures

    E-Print Network [OSTI]

    Boyer, Edmond

    Posters | Posters -- 721 Exploring lighting cultures Beyond light and emotions Vincent LAGANIER 1 , Jasmine van der POL 2 1. Lighting Applications Services (LiAS), Philips Lighting, France vincent.laganier@philips.com 2

  4. LIGHTING CONTROLS: SURVEY OF MARKET POTENTIAL

    E-Print Network [OSTI]

    Verderber, R.R.

    2010-01-01T23:59:59.000Z

    Floors Floor Area Lighting Power Density Light Output Lampenergy den- sity and power density for lighting to 3.5 kWh/Lighting Level (Lumens/Watt) (Footcandles) Power Density (

  5. Low-Pressure Sodium Lighting Basics

    Broader source: Energy.gov [DOE]

    Low-pressure sodium lighting provides more energy-efficient outdoor lighting than high-intensity discharge lighting, but it has very poor color rendition. Typical applications include highway and security lighting, where color is not important.

  6. Radioluminescent lighting for Alaskan runway lighting and marking

    SciTech Connect (OSTI)

    Jensen, G.A.; Leonard, L.E.

    1985-03-01T23:59:59.000Z

    Alaska and other far northern areas have special logistical, environmental, and economic problems that make radioluminescent (RL) lighting applications, especially in the area of airport lighting, an attractive alternative to electrical systems and flare pots. Tests and demonstrations of prototype systems conducted in Alaska over the past two years have proved the basic technological worth of RL airport lighting systems for civilian and military use. If regulatory issues and other factors identified during these tests can be favorably resolved and if the system and its components can be refined through production engineering, attractive applications for RL airfield lighting systems in Alaska and other remote locations could result.

  7. Energy Savings Estimates of Light Emitting Diodes in Niche Lighting...

    Office of Environmental Management (EM)

    in Niche Lighting Applications Prepared for: Building Technologies Program Office of Energy Efficiency and Renewable Energy U.S. Department of Energy Prepared by: Navigant...

  8. Embodied Energy and Off-Grid Lighting

    E-Print Network [OSTI]

    Alstone, Peter

    2012-01-01T23:59:59.000Z

    as a point of comparison with LED lighting product embodieda fairer comparison between off- grid LED lighting and other

  9. Northeast Energy Efficiency Partnerships: Advanced Lighting Controls...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Northeast Energy Efficiency Partnerships: Advanced Lighting Controls - 2015 Peer Review Northeast Energy Efficiency Partnerships: Advanced Lighting Controls - 2015 Peer Review...

  10. Overcoming Common Pitfalls: Energy Efficient Lighting Projects...

    Broader source: Energy.gov (indexed) [DOE]

    Overcoming Common Pitfalls: Energy Efficient Lighting Projects Overcoming Common Pitfalls: Energy Efficient Lighting Projects Transcript Presentation More Documents & Publications...

  11. Light Meson Distribution Amplitudes

    E-Print Network [OSTI]

    R. Arthur; P. A. Boyle; D. Brömmel; M. A. Donnellan; J. M. Flynn; A. Jüttner; H. Pedroso de Lima; T. D. Rae; C. T. Sachrajda; B. Samways

    2010-11-12T23:59:59.000Z

    We calculated the first two moments of the light-cone distribution amplitudes for the pseudoscalar mesons ($\\pi$ and $K$) and the longitudinally polarised vector mesons ($\\rho$, $K^*$ and $\\phi$) as part of the UKQCD and RBC collaborations' $N_f=2+1$ domain-wall fermion phenomenology programme. These quantities were obtained with a good precision and, in particular, the expected effects of $SU(3)$-flavour symmetry breaking were observed. Operators were renormalised non-perturbatively and extrapolations to the physical point were made, guided by leading order chiral perturbation theory. The main results presented are for two volumes, $16^3\\times 32$ and $24^3\\times 64$, with a common lattice spacing. Preliminary results for a lattice with a finer lattice spacing, $32^3\\times64$, are discussed and a first look is taken at the use of twisted boundary conditions to extract distribution amplitudes.

  12. Light modulating device

    DOE Patents [OSTI]

    Rauh, R.D.; Goldner, R.B.

    1989-12-26T23:59:59.000Z

    In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity are disclosed. 1 fig.

  13. Energy and lighting

    SciTech Connect (OSTI)

    Berman, S.

    1985-01-01T23:59:59.000Z

    Advances in research for new types of lighting with increased efficacies (lumens/watt) are discussed in the following areas: (1) high-frequency, solid-state ballasts, (2) isotopic enhancement of mercury isotopes, (3) magnetic augmentation, (4) electrodeless, ultra-high frequency, (5) tuned phosphors, (6) two-photon phosphors, (7) heat mirrors, and (3) advanced control circuits to take advantage of daylight and occupancy. As of 1985, improvements in efficacy have been accomplished on an economic basis to save energy for (1) high-frequency ballasts (25%), (2) isotopic enhancement (5%), and (8) advanced control circuits (up to 50%). Most of these advances depend on a deeper understanding of the weakly ionized plasma as a radiating and diffusing medium. 3 figures, 4 tables.

  14. Light modulating device

    DOE Patents [OSTI]

    Rauh, R. David (Newton, MA); Goldner, Ronald B. (Lexington, MA)

    1989-01-01T23:59:59.000Z

    In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity.

  15. Ultrafast Magnetic Light

    E-Print Network [OSTI]

    Makarov, Sergey V; Krasnok, Alexander E; Belov, Pavel A

    2015-01-01T23:59:59.000Z

    We propose a novel concept for efficient dynamic tuning of optical properties of a high refractive index subwavelength nanoparticle with a magnetic Mie-type resonance by means of femtosecond laser radiation. This concept is based on ultrafast generation of electron-hole plasma within such nanoparticle, drastically changing its transient dielectric permittivity. This allows to manipulate by both electric and magnetic nanoparticle responses, resulting in dramatic changes of its extinction cross section and scattering diagram. Specifically, we demonstrate the effect of ultrafast switching-on a Huygens source in the vicinity of the magnetic dipole resonance. This approach enables to design ultrafast and compact optical switchers and modulators based on the "ultrafast magnetic light" concept.

  16. CX-000135: Categorical Exclusion Determination | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    involve changing the Tribe's street lights from incandescent bulbs to LED (light-emitting diode) lighting fixtures. DOCUMENT(S) AVAILABLE FOR DOWNLOAD CX-000135.pdf More...

  17. CX-004779: Categorical Exclusion Determination | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    (i.e., install compact and linear fluorescent light bulbs and ballasts, light emitting diode emergency and exit signs lighting, occupancy sensors, andor appliances) and...

  18. Data:7f0c8183-5b88-4bd5-857a-e29d0c8a9ddf | Open Energy Information

    Open Energy Info (EERE)

    20100501 End date if known: Rate name: SECURITY LIGHTING SERVICES: 400W Mercury Vapor Bulb Sector: Lighting Description: Dusk till Dawn Lighting Service Source or reference:...

  19. Data:7262b279-e32b-4a52-9d7f-9cf28788ca1e | Open Energy Information

    Open Energy Info (EERE)

    20100501 End date if known: Rate name: SECURITY LIGHTING SERVICES: 175w Mercury Vapor Bulb Sector: Lighting Description: Dusk till Dawn Lighting Service Source or reference:...

  20. On The Use of Eddy Current Brakes as Tunable, Fast Turn-On Viscous Dampers For Haptic Rendering

    E-Print Network [OSTI]

    Hayward, Vincent

    On The Use of Eddy Current Brakes as Tunable, Fast Turn-On Viscous Dampers For Haptic Rendering, linear dampers for haptic rendering using a prototype haptic device outfitted with eddy current brakes discuss the results from haptic experiments for rendering viscosity, virtual walls and virtual friction

  1. Initial results using Eddy Current Brakes as Fast Turn-on, Programmable Physical Dampers for Haptic Rendering

    E-Print Network [OSTI]

    Hayward, Vincent

    Initial results using Eddy Current Brakes as Fast Turn-on, Programmable Physical Dampers for Haptic Machines McGill University, Montr´eal, Qu´ebec, Canada ABSTRACT We demonstrate the use of eddy current propose an alternate method to create damping in a haptic interface that uses eddy current brakes. 2 EDDY

  2. Wind turbines convert the kinetic energy in moving air into rotational energy, which in turn is converted

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Wind turbines convert the kinetic energy in moving air into rotational energy, which in turn is converted to electricity. Since wind speeds vary from month to month and second to second, the amount of electricity wind can make varies constantly. Sometimes a wind turbine will make no power at all

  3. The Earth Institute, Columbia University12 annual donor report 2010 13 at the turn of the century, world leaders

    E-Print Network [OSTI]

    The Earth Institute, Columbia University12 annual donor report 2010 13 at the turn of the century-General Ban Ki-moon at the Earth Institute's State of the Planet Conference in March 2010. "They of humanity are at stake." The Millennium Villages project, a partnership between the Earth Institute

  4. Lubrication and Tool-wear in the Turning of Hard Powdered Metals By: Edward Chow and Anastasia Linuwih

    E-Print Network [OSTI]

    Demirel, Melik C.

    Lubrication and Tool-wear in the Turning of Hard Powdered Metals By: Edward Chow and Anastasia Linuwih Background A current target and need in the auto industry is to achieve improved tool life in machining powered metal valve seats for an engine block. The tools required are specialized and expensive

  5. County looks at turning waste ash into money Two companies using grant to investigate ways to recycle incinerator byproduct

    E-Print Network [OSTI]

    Columbia University

    in York County generates about 160,000 tons of ash per year, and attempts to dispose of it have caused Technology Inc. will seek to use the ash in synthetic stones called Brixx, which also re-use coal wasteCounty looks at turning waste ash into money Two companies using grant to investigate ways

  6. Journal of Materials Processing Technology 189 (2007) 192198 Modelling of surface finish and tool flank wear in turning

    E-Print Network [OSTI]

    Ozel, Tugrul

    2007-01-01T23:59:59.000Z

    flank wear in turning of AISI D2 steel with ceramic wiper inserts Tugrul ¨Ozela,, Yigit Karpata, Lu (60 HRC) using ceramic wiper (multi-radii) design inserts. Multiple linear regression models. Experimental results indicate that surface roughness Ra values as low as 0.18­0.20 m are attainable with wiper

  7. VII Pillars Of Productivity Seven practices characterize highly productive companies turning them into 'digital organizations.' IT is the catalyst,

    E-Print Network [OSTI]

    VII Pillars Of Productivity Seven practices characterize highly productive companies turning them's productivity growth, more than any other economic statistic, that determines our living standards. If productivity grows at 1% per year, living standards will double every 70 years. If productivity grows at 3% per

  8. Motifs in Protein SequencesMotifs in Protein Sequences Examples: Helix-Turn-Helix, Zinc-finger,

    E-Print Network [OSTI]

    Narasimhan, Giri

    -finger, Homeobox domain, Hairpin-beta motif, Calcium-binding motif, Beta-alpha-beta motif, Coiled-coil motifs. Examples: Helix-Turn-Helix, Zinc-finger, Homeobox domain, Hairpin-beta motif, Calcium-binding motif, Beta-alpha-beta minimum energy configuration? Unfolded Molten Globule State Folded Native State Rapid (

  9. anticorrelation light yield: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for Light Engineering Websites Summary: Smart lighting: New Roles for Light in the Solid State Lighting World Robert F. Karlicek, Jr as the largest supplier of LED Lighting...

  10. LED Lighting Off the Grid

    Energy Savers [EERE]

    D. & Kammen, D. M. Decentralized energy systems for clean electricity access. Nature Climate Change accepted, in press, (2015). Off-Grid Status Quo : Fuel Based Lighting...

  11. Pedestrian-Friendly Nighttime Lighting

    Broader source: Energy.gov [DOE]

    This November 19, 2013 webinar presented issues and considerations related to pedestrian-friendly nighttime lighting, such as color rendering, safety, and adaptation. When it comes to outdoor...

  12. Linac Coherent Light Source Overview

    Broader source: Energy.gov [DOE]

    Take an animated tour of the Linac Coherent Light Source (LCLS). Follow the laser pulse from the injector gun all the way through to the Far Experimental Hall.

  13. Linac Coherent Light Source Overview

    SciTech Connect (OSTI)

    None

    2010-01-01T23:59:59.000Z

    Take an animated tour of the Linac Coherent Light Source (LCLS). Follow the laser pulse from the injector gun all the way through to the Far Experimental Hall.

  14. Utility lighting summit proves illuminating

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Utility-lighting-summit-proves-illuminating Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects & Initiatives Expand Projects...

  15. Linac Coherent Light Source Overview

    ScienceCinema (OSTI)

    None

    2013-05-29T23:59:59.000Z

    Take an animated tour of the Linac Coherent Light Source (LCLS). Follow the laser pulse from the injector gun all the way through to the Far Experimental Hall.

  16. Lighting with Paint FABIO PELLACINI

    E-Print Network [OSTI]

    Pellacini, Fabio

    Lighting with Paint FABIO PELLACINI Dartmouth College and FRANK BATTAGLIA, R. KEITH MORLEY, animation, rendering, optimization, painting ACM Reference Format: Pellacini, F., Battaglia, F., Morley, R

  17. Arnold Schwarzenegger LIGHTING RESEARCH PROGRAM

    E-Print Network [OSTI]

    Institute; David Shiller, Environmental Protection Agency. Program Advisory Committee: Ron Lewis Corporation; Don Aumann, California Lighting Technology Center; Holly Larsen, Larsen Communications

  18. Light-by-Light Scattering Effect in Light-Cone Supergraphs

    E-Print Network [OSTI]

    Renata Kallosh; Pierre Ramond

    2010-06-24T23:59:59.000Z

    We give a relatively simple explanation of the light-cone supergraph prediction for the UV properties of the maximally supersymmetric theories. It is based on the existence of a dynamical supersymmetry which is not manifest in the light-cone supergraphs. It suggests that N=4 supersymmetric Yang-Mills theory is UV finite and N=8 supergravity is UV finite at least until 7 loops whereas the $n$-point amplitudes have no UV divergences at least until $L=n+3$. Here we show that this prediction can be deduced from the properties of light-cone supergraphs analogous to the light-by-light scattering effect in QED. A technical aspect of the argument relies on the observation that the dynamical supersymmetry action is, in fact, a compensating field-dependent gauge transformation required for the retaining the light-cone gauge condition $A_+=0$.

  19. Office lighting is down, but office equipment swallows the energy savings

    SciTech Connect (OSTI)

    Kear, E.

    1995-12-01T23:59:59.000Z

    During the energy crises of the 1970s, commercial/office space lighting was an easy target for energy conservation. The first energy conservation measures consisted of turning off the lights when the building was closed for business, but this was not easy for some since many newer buildings were designed without convenient light switches or, for that matter, any switches. Alternative lighting technologies were quickly placed into service; they provided energy savings but usually at a loss of quality and quantity (such as the low-pressure sodium lamps). When the energy crises were over, lighting energy use rose again, but not to its pre-crises level: everyone had at least learned to turn out the lights at night. Eventually, improved lighting fixtures and lamps were developed, T-8s for example, which provide increased quality and quantity with decreased energy use, and now generally less energy is used to illuminate office and commercial spaces. So, since less energy is used for lighting, why is energy use in the commercial sector growing? One answer is the current explosion in the application of electronic office equipment technologies. Energy consumption by `information` equipment in the commercial segment, including large computer systems, has tripled in the last 10 years and could easily double in the next 10. While there are no driving crises as in the 1970s, there are still some lessons to be learned from lighting, such as: (1) Teaching everyone to turn off his/her PC when it`s not in use. This won`t ruin the hard drive, but it might make the computer last longer and it will save energy. (2) Encouraging the development of energy saving features, including Energy Star compliance. Fortunately, this is not too difficult, and is consistent with existing trends in the industry. (3) Teaching people to buy and use the energy-saving features. This could be harder than one might think, since some Energy Star-compliant devices still have a few `bugs.`

  20. OLED lighting devices having multi element light extraction and luminescence conversion layer

    DOE Patents [OSTI]

    Krummacher, Benjamin Claus (Regensburg, DE); Antoniadis, Homer (Mountain View, CA)

    2010-11-16T23:59:59.000Z

    An apparatus such as a light source has a multi element light extraction and luminescence conversion layer disposed over a transparent layer of the light source and on the exterior of said light source. The multi-element light extraction and luminescence conversion layer includes a plurality of light extraction elements and a plurality of luminescence conversion elements. The light extraction elements diffuses the light from the light source while luminescence conversion elements absorbs a first spectrum of light from said light source and emits a second spectrum of light.

  1. Device structure for OLED light device having multi element light extraction and luminescence conversion layer

    DOE Patents [OSTI]

    Antoniadis; Homer (Mountain View, CA), Krummacher; Benjamin Claus (Regensburg, DE)

    2008-01-22T23:59:59.000Z

    An apparatus such as a light source has a multi-element light extraction and luminescence conversion layer disposed over a transparent layer of the light source and on the exterior of said light source. The multi-element light extraction and luminescence conversion layer includes a plurality of light extraction elements and a plurality of luminescence conversion elements. The light extraction elements diffuses the light from the light source while luminescence conversion elements absorbs a first spectrum of light from said light source and emits a second spectrum of light.

  2. 2011MEDIA KIT 170,000college-educated, affluent alumni turn to the award-winning Colorado State

    E-Print Network [OSTI]

    2011MEDIA KIT #12;170,000college-educated, affluent alumni turn to the award-winning Colorado State Colorado's valuable peaks WINTER 2007-2008 M A G A Z I N E Cancer and TB research Peace Corps origins Denver Center High-Country Help Twittering Coach WINTER 2010-2011 M A G A Z I N E Departments 3 VIEW FROM

  3. Shielding analysis for the 300 area light water reactor spent nuclear fuel within a modified multi-canister overpack canister in a modified multi-canister overpack cask

    SciTech Connect (OSTI)

    Gedeon, S.R.

    1997-04-11T23:59:59.000Z

    Spent light water reactor fuel is to be moved out of the 324 Building. It is anticipated that intact fuel assemblies will be loaded in a modified Multi-Canister Overpack Canister, which in turn will be placed in an Overpack Transportation Cask. An estimate of gamma ray dose rates from a transportation cask is desired.

  4. Induction Lighting: An Old Lighting Technology Made New Again...

    Broader source: Energy.gov (indexed) [DOE]

    25 years if operated 10 hours a day. The technology, however, is far from new. Nikola Tesla demonstrated induction lighting in the late 1890s around the same time that his rival,...

  5. Using QECBs for Street Lighting Upgrades: Lighting the Way to...

    Broader source: Energy.gov (indexed) [DOE]

    Summarizes how the City of San Diego leveraged 13.1 million in qualified energy conservation bonds to increase the size of a street lighting upgrade project. Author: Lawrence...

  6. Quasi light fields: Extending the light field to coherent radiation

    E-Print Network [OSTI]

    Accardi, Anthony J.

    Imaging technologies such as dynamic viewpoint generation are engineered for incoherent radiation using the traditional light field, and for coherent radiation using electromagnetic field theory. We present a model of ...

  7. 46th Street Pilot Street Lighting Project

    E-Print Network [OSTI]

    Minnesota, University of

    Street to 48th Street) as standard high-pressure sodium (HPS) lighting comparison corridor #12;The over time #12;Initial Lighting Comparison #12;Lighting Project Location #12;Street Light Layout 3046th Street Pilot Street Lighting Project A Joint Venture: Hennepin County & City of Minneapolis

  8. Projection screen having reduced ambient light scattering

    DOE Patents [OSTI]

    Sweatt, William C. (Albuquerque, NM)

    2010-05-11T23:59:59.000Z

    An apparatus and method for improving the contrast between incident projected light and ambient light reflected from a projection screen are described. The efficiency of the projection screen for reflection of the projected light remains high, while permitting the projection screen to be utilized in a brightly lighted room. Light power requirements from the projection system utilized may be reduced.

  9. Inorganic volumetric light source excited by ultraviolet light

    DOE Patents [OSTI]

    Reed, S.; Walko, R.J.; Ashley, C.S.; Brinker, C.J.

    1994-04-26T23:59:59.000Z

    The invention relates to a composition for the volumetric generation of radiation. The composition comprises a porous substrate loaded with a component capable of emitting radiation upon interaction with an exciting radiation. Preferably, the composition is an aerogel substrate loaded with a component, e.g., a phosphor, capable of interacting with exciting radiation of a first energy, e.g., ultraviolet light, to produce radiation of a second energy, e.g., visible light. 4 figures.

  10. Saturable absorption and 'slow light'

    E-Print Network [OSTI]

    Adrian C Selden

    2006-03-25T23:59:59.000Z

    Quantitative evaluation of some recent 'slow light' experiments based on coherent population oscillations (CPO) shows that they can be more simply interpreted as saturable absorption phenomena. Therefore they do not provide an unambiguous demonstration of 'slow light'. Indeed a limiting condition on the spectral bandwidth is not generally satisfied, such that the requirements for burning a narrow spectral hole in the homogeneously broadened absorption line are not met. Some definitive tests of 'slow light' phenomena are suggested, derived from analysis of phase shift and pulse delay for a saturable absorber

  11. Next Generation Light Source Workshops

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Next Generation Light Source Workshops A series of workshops will be held in late August with the goal of refining the scientific drivers for the facility and translating the...

  12. Columbia Water & Light- Solar Rebates

    Broader source: Energy.gov [DOE]

    Columbia Water & Light electric customers are eligible for a $400 rebate for the purchase of a new solar water heater. To apply for this rebate, a customer submits a pre-approval application to...

  13. Arnold Schwarzenegger LIGHTING RESEARCH PROGRAM

    E-Print Network [OSTI]

    ; James Bryan, Arden Realty; Peter Ngai, Peerless; David Malman, Architectural Lighting Design; Ron Lewis) ; Terry McGowan, ALA; Adriana Valencia (CPUC alternate). Program Advisory Committee: Ron Lewis; Holly Larsen, Larsen Communications. Please cite this repor

  14. Arnold Schwarzenegger LIGHTING RESEARCH PROGRAM

    E-Print Network [OSTI]

    Design Group; Bill Daiber, WFD Associates. Program Advisory Committee: Ron Lewis, Department of Energy Buchan, Sacramento Municipal Utility District. Editorial assistance: Holly Larsen, Larsen Communications Lighting Technology Center; Holly Larsen, Larsen Communications. Please cite

  15. Arnold Schwarzenegger LIGHTING RESEARCH PROGRAM

    E-Print Network [OSTI]

    the contribution of the below individuals: Program Advisory Committee: Ron Lewis, Department of Energy; Jerry Mills Lighting Technology Center; Holly Larsen, Larsen Communications. Please cite this report as follows

  16. Light Duty Vehicle CNG Tanks

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Light Duty Vehicle CNG Tanks Dane A. Boysen, PhD Program Director Advanced Research Projects Agency-Energy, US DOE dane.boysen@doe.gov Fiber Reinforced Polymer Composite...

  17. Novel phosphors for solid state lighting

    E-Print Network [OSTI]

    Furman, Joshua D

    2010-11-16T23:59:59.000Z

    Solid state white light emitting diode lighting devices outperform conventional light sources in terms of lifetime, durability, and lumens per watt. However, the capital contribution is still to high to encourage widespread adoption. Furthermore...

  18. Toward ZnO Light Emitting Diode

    E-Print Network [OSTI]

    Liu, Jianlin

    2008-01-01T23:59:59.000Z

    applications such as light emitting diodes (LEDs) and laser009 "Toward ZnO Light Emitting Diode" Jianlin Liu July 2008Title: “Toward ZnO Light Emitting Diode” Sponsor: UC Energy

  19. CAMPUS INFRASTRUCTURE & SERVICES CIS-Standard-Lighting

    E-Print Network [OSTI]

    Viglas, Anastasios

    ...........................................................................................................5 5.6 Light fittings and lux performance requirements for various University space types.....5 5...........................................................................12 5.8 EXTERIOR LIGHTING.......................................................................................................12 5.8.2 Exterior Light Poles, Fixings and Wiring

  20. EECBG Success Story: Lighting Retrofit Improving Visibility,...

    Broader source: Energy.gov (indexed) [DOE]

    New LED lighting fixtures (right) emit a whiter light than existing high-pressure sodium cobra head streetlights (left) and don't spill light onto nearby houses. | Photos courtesy...