Powered by Deep Web Technologies
Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

4178 IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, VOL. 60, NO. 12, DECEMBER 2012 An Inkjet-Printed Solar-Powered Wireless Beacon  

E-Print Network [OSTI]

--Active antennas, energy harvesting, flexible elec- tronics, harmonic balance, inkjet printing, solar antenna4178 IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, VOL. 60, NO. 12, DECEMBER 2012 An Inkjet, wireless beacon, wireless energy transfer, wireless identification. I. INTRODUCTION THE combination

Tentzeris, Manos

2

406 IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS, VOL. 23, NO. 8, AUGUST 2013 A Novel Frequency-Selective Power  

E-Print Network [OSTI]

406 IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS, VOL. 23, NO. 8, AUGUST 2013 A Novel Frequency.rosenberg@ieee.org). M. Salehi is with the Department of Electrical and Computer Engineering, University of Victoria, B. Bornemann is with the Department of Electrical and Computer Engi- neering, University of Victoria, B

Bornemann, Jens

3

684 IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS, VOL. 16, NO. 12, DECEMBER 2006 A 20 dBm Linear RF Power Amplifier Using  

E-Print Network [OSTI]

that the impedance transformation ratio from 50 becomes too high for output powers beyond 100 mW. The resulting power/high voltage PAs were presented using directly stacked FETs without transformers in [6684 IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS, VOL. 16, NO. 12, DECEMBER 2006 A 20 dBm Linear

Asbeck, Peter M.

4

422 IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS, VOL. 19, NO. 6, JUNE 2009 Instantaneous Microwave Frequency Measurement  

E-Print Network [OSTI]

. I. INTRODUCTION MICROWAVE receiver for radar and other electronic warfare applications require of Information and Electronic Engineering, Zhejiang University, Hangzhou 310027, China (e-mail: chihao@zju.edu.cn). J. Yao is with the Department of Information and Electronic Engineering, Zhejiang University

Yao, Jianping

5

Technology Licensing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Licensing INL contractor-owned inventions are available for licensing and commercialization by U.S. and foreign companies and organizations. The INL licenses its intellectual...

6

Improving spectrum sensing and multiuser cooperation in wireless cognitive radio networks.  

E-Print Network [OSTI]

??Nowadays wireless spectrum resource is more and more scarce because most wireless spectrum bands have been allocated to licensed users, however measurements show that many… (more)

Song, Chengqi

2010-01-01T23:59:59.000Z

7

Licensing Guide and Sample License  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of this document is to describe a "typical" DOE laboratory IP license agreement in order to provide prospective licensees with an understanding of the terms and condi- tions...

8

Sample Licensing Agreements | Partnerships | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

be modified to meet individual circumstances. Licensing Agreements Nonexclusive Patent License Exclusive Patent License Nonexclusive Copyright License Nondisclosure (NDA)...

9

Solar Contractor Licensing  

Broader source: Energy.gov [DOE]

Utah's Division of Occupational and Professional Licensing requires installers of solar energy systems to be licensed contractors. General electrical contractors carrying an S200 license are...

10

Solar Contractor Licensing  

Broader source: Energy.gov [DOE]

The California Contractors State License Board administers contractor licenses. The C-46 Solar Contractor license covers active solar water and space heating systems, solar pool heating systems,...

11

Renewable Energy Contractor Licensing  

Broader source: Energy.gov [DOE]

Oregon requires trade licenses for people installing solar energy equipment, and contractor licenses for the companies that do construction.

12

IEEE TRANSACTIONS ON WIRELESS COMMUNICATIONS, VOL. 8, NO. 1, JANUARY 2009 297 Optimal Selection of Channel Sensing Order in  

E-Print Network [OSTI]

of the prime wireless spectrum has been licensed for specific applications. However, according to recent measurements of wireless spectrum usage, the licensed spectrum is actually severely under-utilized. Thus when and where licensed users (referred to as primary users) are not active. Recently cognitive radio

Jiang, Hai

13

Broadband Wireless Cognitive Radio-I  

E-Print Network [OSTI]

spectrum usage! #12;CMPE 591 - Broadband Wireless Networks 6 Cognitive Radio "Cognitive Radio" is the key portions of the spectrum is available and detect the presence of licensed users when a user operates in a licensed band. (Spectrum Sensing) 2. Select the best available channel. (Spectrum Decision) 3. Coordinate

Tuðcu, Tuna

14

Express Licensing Program  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

License? PATENTS Non-Exclusive License Issue Fee 7,500 Annual License Fee 500 Earned Royalty on Sales 2% The fees associated with each patent offered through the Express...

15

Solar Contractor Licensing  

Broader source: Energy.gov [DOE]

Until 1994, Florida offered limited specialty licenses for residential solar hot water and pool heating, as well a general solar contractor's license. These specialty licenses have not been issued...

16

Solar Contractor Licensing  

Broader source: Energy.gov [DOE]

Nevada law requires that solar energy system installers be licensed by the Nevada State Contractors Board. Contractors may be licensed under License Classification C-37 (solar contracting for solar...

17

Solar Contractor Licensing  

Broader source: Energy.gov [DOE]

The Arizona Registrar of Contractors does not offer a general solar electric contractor license, but the state's C-11/L-11 electrical license covers solar electric installations. C-11 licenses are...

18

208 IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS, VOL. 11, NO. 5, MAY 2001 Novel Low-Cost Ultra-Wideband, Ultra-Short-Pulse  

E-Print Network [OSTI]

-to-peak and a pulse repetition rate of 10 MHz. The measured pulses have good symmetry and low ringing level. Index Terms--Ground penetrating radar, MIC, pulse generator, transmitter, ultra-wideband radar. I. INTRODUCTION ULTRA-wideband (UWB), ultra-short pulses are very at- tractive for radar and wireless

Arslan, Hüseyin

19

The impact of Wireless Sensor Networks on the society, industry and everyday life by is forecasted  

E-Print Network [OSTI]

, senso- rics, antennas, wireless communication, microwave technologies, energy harvesting, computer and generate energy, · make sensor networks self-configuring, robust and maintenance-free up to 10 years

Flener, Pierre

20

Solar Contractor Licensing  

Broader source: Energy.gov [DOE]

Hawaii offers several specialty licenses for solar contractors through Hawaii’s Department of Commerce and Consumer Affairs. The following specialty licenses are available: Solar Power Systems...

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Wave Energy Development in Oregon Licensing & Permitting Requirements  

E-Print Network [OSTI]

...............................................................................................................................................6 State Hydroelectric License

22

1128 IEEE TRANSACTIONS ON WIRELESS COMMUNICATIONS, VOL. 9, NO. 3, MARCH 2010 Optimal Multi-Channel Cooperative Sensing in  

E-Print Network [OSTI]

--Cognitive radio, spectrum sensing, throughput maximization. I. INTRODUCTION DUE to the rapid growth of wireless-utilization of licensed spectrum at a time or a location has been observed by measurements of wireless spectrum usage [1 (secondary) users can utilize the spectrum when and where the licensed (primary) users are not using it

Jiang, Hai

23

Solar Heating Contractor Licensing  

Broader source: Energy.gov [DOE]

Michigan offers a solar heating contractor specialty license to individuals who have at least three years of experience installing solar equipment under the direction of a licensed solar contractor...

24

History of wireless power transmission  

SciTech Connect (OSTI)

The history of wireless power transmission at microwave frequencies is reviewed with emphasis upon the time period starting with the post World War II efforts to use the new microwave technology developed during the war. A nationally televised demonstration of a microwave powered helicopter at the Spencer Laboratory of the Raytheon Co., in 1964 was the result of these early efforts and broadly introduced the concept of wireless power transmission to scientific and engineering communities and to the public. Subsequent development efforts centered on improving the efficiency of the interconversion of d.c. and microwave power at the ends of the system to reach a demonstrated overall d.c. to d.c. system efficiency of 54% in 1974. The response to the requirements of applications such as the Solar Power Satellite and high altitude microwave powered aircraft have changed the direction of technology development and greatly expanded the technology base. Recent and current efforts are centered on examining the use of higher frequencies than the baseline 2.45 GHz, and in reducing the system costs at 2.45 GHz. 26 refs., 14 figs.

Brown, W.C. [Microwave Power Transmission Systems, Weston, MA (United States)] [Microwave Power Transmission Systems, Weston, MA (United States)

1996-12-31T23:59:59.000Z

25

Wireless Josephson amplifier  

SciTech Connect (OSTI)

Josephson junction parametric amplifiers are playing a crucial role in the readout chain in superconducting quantum information experiments. However, their integration with current 3D cavity implementations poses the problem of transitioning between waveguide, coax cables, and planar circuits. Moreover, Josephson amplifiers require auxiliary microwave components, like directional couplers and/or hybrids, that are sources of spurious losses and impedance mismatches that limit measurement efficiency and amplifier tunability. We have developed a wireless architecture for these parametric amplifiers that eliminates superfluous microwave components and interconnects. This greatly simplifies their assembly and integration into experiments. We present an experimental realization of such a device operating in the 9–11?GHz band with about 100?MHz of amplitude gain-bandwidth product, on par with devices mounted in conventional sample holders. The simpler impedance environment presented to the amplifier also results in increased amplifier tunability.

Narla, A.; Sliwa, K. M.; Hatridge, M.; Shankar, S.; Frunzio, L.; Schoelkopf, R. J.; Devoret, M. H. [Department of Applied Physics, Yale University, New Haven, Connecticut 06511 (United States)

2014-06-09T23:59:59.000Z

26

Certificating Vehicle Public Key with Vehicle Attributes A (periodical) Licensing Routine, Against Man-in-the-Middle  

E-Print Network [OSTI]

Certificating Vehicle Public Key with Vehicle Attributes A (periodical) Licensing Routine, Against actions among vehicles in traffic by the use of wireless transceivers. Unfortunately, the wireless communication among vehicles is vulnerable to security threats that may lead to very serious safety hazards

27

License Iso. CM35  

Office of Legacy Management (LM)

of iemzaace of thie llcenee, you are required to maintain ; mcordd of ymir inventories, receipts and cranefers of refined source m- urirl. I lhlr license ia subject to...

28

Licensing Information & FAQs Social Work is a licensed profession with an entry level post-MSW license, the LGSW (Licensed  

E-Print Network [OSTI]

Licensing Information & FAQs Social Work is a licensed profession with an entry level post-MSW of the Licensing Exam Preparation Services available to MSW students? UM School of Social Work Continuing

Weber, David J.

29

Microwave detector  

DOE Patents [OSTI]

A microwave detector (10) is provided for measuring the envelope shape of a microwave pulse comprised of high-frequency oscillations. A biased ferrite (26, 28) produces a magnetization field flux that links a B-dot loop (16, 20). The magnetic field of the microwave pulse participates in the formation of the magnetization field flux. High-frequency insensitive means (18, 22) are provided for measuring electric voltage or current induced in the B-dot loop. The recorded output of the detector is proportional to the time derivative of the square of the envelope shape of the microwave pulse.

Meldner, Heiner W. (Moss Beach, CA); Cusson, Ronald Y. (Chapel Hill, NC); Johnson, Ray M. (San Ramon, CA)

1986-01-01T23:59:59.000Z

30

Microwave detector  

DOE Patents [OSTI]

A microwave detector is provided for measuring the envelope shape of a microwave pulse comprised of high-frequency oscillations. A biased ferrite produces a magnetization field flux that links a B-dot loop. The magnetic field of the microwave pulse participates in the formation of the magnetization field flux. High-frequency insensitive means are provided for measuring electric voltage or current induced in the B-dot loop. The recorded output of the detector is proportional to the time derivative of the square of the envelope shape of the microwave pulse.

Meldner, H.W.; Cusson, R.Y.; Johnson, R.M.

1985-02-08T23:59:59.000Z

31

Radioactive Materials License Commitments  

E-Print Network [OSTI]

Radioactive Materials License Commitments for The University of Texas at Austin May 2009 July 2009 in the use of radioactive materials. In July 1963, the State of Texas granted The University of Texas at Austin a broad radioactive materials license for research, development and instruction. While this means

32

NETL Partnership and Licensing Agreements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Partnerships and Licensing Options Available Technologies Partnerships and Licensing Success Stories Contact Us Cooperative Research and Development Agreement (CRADA) A CRADA...

33

Solar Hot Water Contractor Licensing  

Broader source: Energy.gov [DOE]

Arkansas offers several limited, specialty licenses for solar thermal installers under the general plumbing license. There are three specialty classifications available for solar thermal...

34

IBM Tivoli License Manager Intelligent software license  

E-Print Network [OSTI]

and software asset management, including a powerful technology capable of controlling software assets inventory and usage tracking. The second part of the document presents a technical overview of Tivoli for license management 5 Understanding software usage and inventory 6 Collecting software usage information 8

35

Licensing East Asian Resources  

E-Print Network [OSTI]

our licensing of East Asian Resources here at UCSD. y It isthe history of electronic resources and the use of licensesclick through, or even use a resource with posted terms on a

Chu, Victoria; Eggleston, Holly

2008-01-01T23:59:59.000Z

36

Microwave generator  

DOE Patents [OSTI]

A microwave generator is provided for generating microwaves substantially from virtual cathode oscillation. Electrons are emitted from a cathode and accelerated to an anode which is spaced apart from the cathode. The anode has an annular slit there through effective to form the virtual cathode. The anode is at least one range thickness relative to electrons reflecting from the virtual cathode. A magnet is provided to produce an optimum magnetic field having the field strength effective to form an annular beam from the emitted electrons in substantial alignment with the annular anode slit. The magnetic field, however, does permit the reflected electrons to axially diverge from the annular beam. The reflected electrons are absorbed by the anode in returning to the real cathode, such that substantially no reflexing electrons occur. The resulting microwaves are produced with a single dominant mode and are substantially monochromatic relative to conventional virtual cathode microwave generators. 6 figs.

Kwan, T.J.T.; Snell, C.M.

1987-03-31T23:59:59.000Z

37

Microwave furnace having microwave compatible dilatometer  

DOE Patents [OSTI]

An apparatus for measuring and monitoring a change in the dimension of a sample being heated by microwave energy is described. The apparatus comprises a microwave heating device for heating a sample by microwave energy, a microwave compatible dilatometer for measuring and monitoring a change in the dimension of the sample being heated by microwave energy without leaking microwaves out of the microwave heating device, and a temperature determination device for measuring and monitoring the temperature of the sample being heated by microwave energy.

Kimrey, Jr., Harold D. (Knoxville, TN); Janney, Mark A. (Knoxville, TN); Ferber, Mattison K. (Oak Ridge, TN)

1992-01-01T23:59:59.000Z

38

Microwave furnace having microwave compatible dilatometer  

DOE Patents [OSTI]

An apparatus for measuring and monitoring a change in the dimension of a sample being heated by microwave energy is described. The apparatus comprises a microwave heating device for heating a sample by microwave energy, a microwave compatible dilatometer for measuring and monitoring a change in the dimension of the sample being heated by microwave energy without leaking microwaves out of the microwave heating device, and a temperature determination device for measuring and monitoring the temperature of the sample being heated by microwave energy. 2 figs.

Kimrey, H.D. Jr.; Janney, M.A.; Ferber, M.K.

1992-03-24T23:59:59.000Z

39

Published in IET Microwaves, Antennas & Propagation Received on 26th November 2012  

E-Print Network [OSTI]

for wireless power transfer and localisation, energy harvesting circuits and nanocarbon-based gasPublished in IET Microwaves, Antennas & Propagation Received on 26th November 2012 Revised on 16th for the development of microwave circuits and components. Inkjet- printing technology of conductive silver

Tentzeris, Manos

40

Solar and Wind Contractor Licensing  

Broader source: Energy.gov [DOE]

All solar and wind energy installations must be performed by a contractor duly licensed by and in good standing with the Louisiana Contractors Licensing Board with a classification of "Solar Energy...

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Licensing Opportunity The Problem  

E-Print Network [OSTI]

Licensing Opportunity The Problem Small scale wind and water turbines (% and noise levels significantly reduced. All in all, the new generator increases the viability of low wind for small scale wind turbines". The Opportunity A significant body of intellectual property (IP) has been

Wirosoetisno, Djoko

42

A SIMPLIFIED ANALYSIS FOR HIGH POWER MICROWAVE BANDPASS FILTER STRUCTURES  

E-Print Network [OSTI]

and wireless diplexers. An exact analysis of the voltage/power distribution inside a filter involves the 3D is derived. This transformation is then used to relate the actual voltage distribution inside a transmissionA SIMPLIFIED ANALYSIS FOR HIGH POWER MICROWAVE BANDPASS FILTER STRUCTURES Apu Sivadas, Ming Yu

Yu, Ming

43

This article has been accepted for inclusion in a future issue of this journal. Content is final as presented, with the exception of pagination. IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES 1  

E-Print Network [OSTI]

-definition video and audio broadcasts to TV and smart phones. This paper presents a unique embedded wireless energy-harvesting and wireless transceivers. In this paper, we present a unique embedded wireless energy- harvesting prototype (E as presented, with the exception of pagination. IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES 1 E

Tentzeris, Manos

44

NONCOMMERCIAL SOFTWARE LICENSE AGREEMENT  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the Contributions and Achievements of Women |hits 21Species. | EMSL661.License

45

Energy Harvesting Wireless Communications  

E-Print Network [OSTI]

perspective what should we care about for energy efficient design of cellular/conventional wireless networks

Ulukus, Sennur

46

Intrusion detection and monitoring for wireless networks.  

SciTech Connect (OSTI)

Wireless computer networks are increasing exponentially around the world. They are being implemented in both the unlicensed radio frequency (RF) spectrum (IEEE 802.11a/b/g) and the licensed spectrum (e.g., Firetide [1] and Motorola Canopy [2]). Wireless networks operating in the unlicensed spectrum are by far the most popular wireless computer networks in existence. The open (i.e., proprietary) nature of the IEEE 802.11 protocols and the availability of ''free'' RF spectrum have encouraged many producers of enterprise and common off-the-shelf (COTS) computer networking equipment to jump into the wireless arena. Competition between these companies has driven down the price of 802.11 wireless networking equipment and has improved user experiences with such equipment. The end result has been an increased adoption of the equipment by businesses and consumers, the establishment of the Wi-Fi Alliance [3], and widespread use of the Alliance's ''Wi-Fi'' moniker to describe these networks. Consumers use 802.11 equipment at home to reduce the burden of running wires in existing construction, facilitate the sharing of broadband Internet services with roommates or neighbors, and increase their range of ''connectedness''. Private businesses and government entities (at all levels) are deploying wireless networks to reduce wiring costs, increase employee mobility, enable non-employees to access the Internet, and create an added revenue stream to their existing business models (coffee houses, airports, hotels, etc.). Municipalities (Philadelphia; San Francisco; Grand Haven, MI) are deploying wireless networks so they can bring broadband Internet access to places lacking such access; offer limited-speed broadband access to impoverished communities; offer broadband in places, such as marinas and state parks, that are passed over by traditional broadband providers; and provide themselves with higher quality, more complete network coverage for use by emergency responders and other municipal agencies. In short, these Wi-Fi networks are being deployed everywhere. Much thought has been and is being put into evaluating cost-benefit analyses of wired vs. wireless networks and issues such as how to effectively cover an office building or municipality, how to efficiently manage a large network of wireless access points (APs), and how to save money by replacing an Internet service provider (ISP) with 802.11 technology. In comparison, very little thought and money are being focused on wireless security and monitoring for security purposes.

Thomas, Eric D.; Van Randwyk, Jamie A.; Lee, Erik J.; Stephano, Amanda (Indiana University); Tabriz, Parisa (University of Illinois at Urbana-Champaign); Pelon, Kristen (Cedarville University); McCoy, Damon (University of Colorado, Boulder); Lodato, Mark (Lafayette College); Hemingway, Franklin (University of New Mexico); Custer, Ryan P.; Averin, Dimitry (Polytechnic University); Franklin, Jason (Carnegie Mellon University); Kilman, Dominique Marie

2005-11-01T23:59:59.000Z

47

Solar Hot Water Contractor Licensing  

Broader source: Energy.gov [DOE]

In order to be eligible for Maine's solar thermal rebate program, systems must be installed by licensed plumbers who have received additional certification for solar thermal systems from the North...

48

City of Madison- Contractor Licensing  

Broader source: Energy.gov [DOE]

Although the State of Wisconsin does not have any specific laws for contractors dealing with renewable energy, the City of Madison has issued rules for contractor licensing and equipment standards...

49

Solar and Wind Contractor Licensing  

Broader source: Energy.gov [DOE]

The Connecticut Department of Consumer Protection (DCP) is authorized to issue licenses for solar-thermal work, solar-electric work and wind-electric work. "Solar thermal work" is defined as "the...

50

Inkjet-Printed Nanotechnology-Enabled Zero-Power Wireless Sensor Nodes for Internet-of-Things (IoT) and  

E-Print Network [OSTI]

Interface for Sensing/Energy Harvesting/storing Nanowire Battery Multi-mode Wireless Interface for Comm. and Energy Harvesting .... .... Wireless Interface for Comm/Sensor/Power Nanowire Energy Harvest ElectronicT) and M2M Applications Manos M. Tentzeris Professor, IEEE Fellow and Distinguished Microwave Lecturer

Tentzeris, Manos

51

Wireless Urban Sensing Systems  

E-Print Network [OSTI]

enabled by personal wireless sensing devices introduces newpublic or personal servers, but also on mobile devices. For

2006-01-01T23:59:59.000Z

52

Lunar Wireless Power Transfer Feasibility Study  

SciTech Connect (OSTI)

This study examines the feasibility of a multi-kilowatt wireless radio frequency (RF) power system to transfer power between lunar base facilities. Initial analyses, show that wireless power transfer (WPT) systems can be more efficient and less expensive than traditional wired approaches for certain lunar and terrestrial applications. The study includes evaluations of the fundamental limitations of lunar WPT systems, the interrelationships of possible operational parameters, and a baseline design approach for a notionial system that could be used in the near future to power remote facilities at a lunar base. Our notional system includes state-of-the-art photovoltaics (PVs), high-efficiency microwave transmitters, low-mass large-aperture high-power transmit antennas, high-efficiency large-area rectenna receiving arrays, and reconfigurable DC combining circuitry.

Sheldon Freid, et al.

2008-06-01T23:59:59.000Z

53

Spectrum-Sensing Opportunistic Wireless Relay Networks: Outage and Diversity Performance  

E-Print Network [OSTI]

Lee Aylin Yener Wireless Communications and Networking Laboratory Electrical Engineering Department cooperatively sense the spectrum and help the designated cognitive relay node. I. INTRODUCTION The demand. Currently, the radio spectrum is regulated and the licensed spectrum bands are not "shared". On the other

Yener, Aylin

54

IEEE TRANSACTIONS ON WIRELESS COMMUNICATIONS, VOL. 10, NO. 7, JULY 2011 2135 Cooperative Spectrum Sensing in  

E-Print Network [OSTI]

sensing in the presence of PUEA. Index Terms--Cognitive radio, cooperative spectrum sensing, primary user "cognitive radio" (CR), which allows unlicensed users to access the licensed frequency bands without of the wireless system is dramatically improved. Cognitive radio generally includes four basic elements: spectrum

Yang, Eui-Hyeok

55

Microwave Radiometer (MWR) Handbook  

SciTech Connect (OSTI)

The Microwave Radiometer (MWR) provides time-series measurements of column-integrated amounts of water vapor and liquid water. The instrument itself is essentially a sensitive microwave receiver. That is, it is tuned to measure the microwave emissions of the vapor and liquid water molecules in the atmosphere at specific frequencies.

Morris, VR

2006-08-01T23:59:59.000Z

56

Microsoft Word - Licensing_Agreements_Website_2014.docx  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Licensing Process Licensing Agreements Licensing INL technologies allows a business to reproduce, manufacture, sell, or use INL-developed or owned intellectual property. INL...

57

High brightness microwave lamp  

DOE Patents [OSTI]

An electrodeless microwave discharge lamp includes a source of microwave energy, a microwave cavity, a structure configured to transmit the microwave energy from the source to the microwave cavity, a bulb disposed within the microwave cavity, the bulb including a discharge forming fill which emits light when excited by the microwave energy, and a reflector disposed within the microwave cavity, wherein the reflector defines a reflective cavity which encompasses the bulb within its volume and has an inside surface area which is sufficiently less than an inside surface area of the microwave cavity. A portion of the reflector may define a light emitting aperture which extends from a position closely spaced to the bulb to a light transmissive end of the microwave cavity. Preferably, at least a portion of the reflector is spaced from a wall of the microwave cavity. The lamp may be substantially sealed from environmental contamination. The cavity may include a dielectric material is a sufficient amount to require a reduction in the size of the cavity to support the desired resonant mode.

Kirkpatrick, Douglas A.; Dolan, James T.; MacLennan, Donald A.; Turner, Brian P.; Simpson, James E.

2003-09-09T23:59:59.000Z

58

Microwave hemorrhagic stroke detector  

DOE Patents [OSTI]

The microwave hemorrhagic stroke detector includes a low power pulsed microwave transmitter with a broad-band antenna for producing a directional beam of microwaves, an index of refraction matching cap placed over the patients head, and an array of broad-band microwave receivers with collection antennae. The system of microwave transmitter and receivers are scanned around, and can also be positioned up and down the axis of the patients head. The microwave hemorrhagic stroke detector is a completely non-invasive device designed to detect and localize blood pooling and clots or to measure blood flow within the head or body. The device is based on low power pulsed microwave technology combined with specialized antennas and tomographic methods. The system can be used for rapid, non-invasive detection of blood pooling such as occurs with hemorrhagic stroke in human or animal patients as well as for the detection of hemorrhage within a patient's body.

Haddad, Waleed S. (Dublin, CA); Trebes, James E. (Livermore, CA)

2002-01-01T23:59:59.000Z

59

Microwave hemorrhagic stroke detector  

DOE Patents [OSTI]

The microwave hemorrhagic stroke detector includes a low power pulsed microwave transmitter with a broad-band antenna for producing a directional beam of microwaves, an index of refraction matching cap placed over the patients head, and an array of broad-band microwave receivers with collection antennae. The system of microwave transmitter and receivers are scanned around, and can also be positioned up and down the axis of the patients head. The microwave hemorrhagic stroke detector is a completely non-invasive device designed to detect and localize blood pooling and clots or to measure blood flow within the head or body. The device is based on low power pulsed microwave technology combined with specialized antennas and tomographic methods. The system can be used for rapid, non-invasive detection of blood pooling such as occurs with hemorrhagic stoke in human or animal patients as well as for the detection of hemorrhage within a patient's body.

Haddad, Waleed S. (Dublin, CA); Trebes, James E. (Livermore, CA)

2007-06-05T23:59:59.000Z

60

Licensed fuel facility status report  

SciTech Connect (OSTI)

NRC is committed to the periodic publication of licensed fuel facilities inventory difference data, following agency review of the information and completion of any related NRC investigations. Information in this report includes inventory difference data for active fuel fabrication facilities possessing more than one effective kilogram of high enriched uranium, low enriched uranium, plutonium, or uranium-233.

Joy, D.; Brown, C.

1993-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

IEEE TRANSACTIONS ON WIRELESS COMMUNICATIONS, VOL. 13, NO. 9, SEPTEMBER 2014 5043 Multiuser Cognitive Relay Networks: Joint Impact  

E-Print Network [OSTI]

spectrum for the next generation wireless communication sys- tems [1]­[3]. In a cognitive radio network, the secondary user is allowed to occupy the licensed spectrum of the primary user in the underlay, overlay Terms--Cognitive radio, maximal ratio combining, mul- tiuser scheduling, relay networks. I. INTRODUCTION

Elkashlan, Maged

62

Variable frequency microwave heating apparatus  

DOE Patents [OSTI]

A variable frequency microwave heating apparatus (10) designed to allow modulation of the frequency of the microwaves introduced into a multi-mode microwave cavity (34) for testing or other selected applications. The variable frequency microwave heating apparatus (10) includes a microwave signal generator (12) and a high-power microwave amplifier (20) or a high-power microwave oscillator (14). A power supply (22) is provided for operation of the high-power microwave oscillator (14) or microwave amplifier (20). A directional coupler (24) is provided for detecting the direction and amplitude of signals incident upon and reflected from the microwave cavity (34). A first power meter (30) is provided for measuring the power delivered to the microwave furnace (32). A second power meter (26) detects the magnitude of reflected power. Reflected power is dissipated in the reflected power load (28).

Bible, Don W. (Clinton, TN); Lauf, Robert J. (Oak Ridge, TN); Johnson, Arvid C. (Lake in the Hills, IL); Thigpen, Larry T. (Angier, NC)

1999-01-01T23:59:59.000Z

63

Microwave processing of ceramics  

SciTech Connect (OSTI)

Recent work in the areas of microwave processing and joining of ceramics is briefly reviewed. Advantages and disadvantages of microwave processing as well as some of the current issues in the field are discussed. Current state and potential for future commercialization of this technology is also addressed.

Katz, J.D.

1993-04-01T23:59:59.000Z

64

Microwave processing of ceramics  

SciTech Connect (OSTI)

Recent work in the areas of microwave processing and joining of ceramics is briefly reviewed. Advantages and disadvantages of microwave processing as well as some of the current issues in the field are discussed. Current state and potential for future commercialization of this technology is also addressed.

Katz, J.D.

1993-01-01T23:59:59.000Z

65

Microwave coupler and method  

DOE Patents [OSTI]

The present invention is directed to a microwave coupler for enhancing the heating or metallurgical treatment of materials within a cold-wall, rapidly heated cavity as provided by a microwave furnace. The coupling material of the present invention is an alpha-rhombohedral-boron-derivative-structure material such as boron carbide or boron silicide which can be appropriately positioned as a susceptor within the furnace to heat other material or be in powder particulate form so that composites and structures of boron carbide such as cutting tools, grinding wheels and the like can be rapidly and efficiently formed within microwave furnaces.

Holcombe, C.E.

1984-11-29T23:59:59.000Z

66

Technology available for licensing: CURLS | Argonne National...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technology available for licensing: CURLS November 21, 2013 Tweet EmailPrint CURLS - the Containment Unidirectional Resource Loading System developed at Argonne - expands the...

67

Commercialization and Licensing | ornl.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Exclusive Patent License for ORNL Graphite Foam Technology January 28, 2010 - Light-emitting diode (LED) lamps are increasingly in demand in industrial and commercial...

68

Alumina-forming Austenitic Alloys Licensed | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technology Corporation March 13, 2013 Carpenter Technology Corporation has licensed a new alloy developed at the Oak Ridge National Laboratory. Carpenter Technology Corporation...

69

Emitron: microwave diode  

DOE Patents [OSTI]

The invention comprises a new class of device, driven by electron or other charged particle flow, for producing coherent microwaves by utilizing the interaction of electromagnetic waves with electron flow in diodes not requiring an external magnetic field. Anode and cathode surfaces are electrically charged with respect to one another by electron flow, for example caused by a Marx bank voltage source or by other charged particle flow, for example by a high energy charged particle beam. This produces an electric field which stimulates an emitted electron beam to flow in the anode-cathode region. The emitted electrons are accelerated by the electric field and coherent microwaves are produced by the three dimensional spatial and temporal interaction of the accelerated electrons with geometrically allowed microwave modes which results in the bunching of the electrons and the pumping of at least one dominant microwave mode.

Craig, G.D.; Pettibone, J.S.; Drobot, A.T.

1982-05-06T23:59:59.000Z

70

Miniaturized hand held microwave interference scanning system for NDE of dielectric armor and armor systems  

SciTech Connect (OSTI)

Inspection of ceramic-based armor has advanced through development of a microwave-based, portable, non-contact NDE system. Recently, this system was miniaturized and made wireless for maximum utility in field applications. The electronic components and functionality of the laboratory system are retained, with alternative means of position input for creation of scan images. Validation of the detection capability was recently demonstrated using specially fabricated surrogates and ballistic impact-damaged specimens. The microwave data results have been compared to data from laboratory-based microwave interferometry systems and digital x-ray imaging. The microwave interference scanning has been shown to reliably detect cracks, laminar features and material property variations. The authors present details of the system operation, descriptions of the test samples used and recent results obtained.

Schmidt, Karl F.; Little, Jack R. [Evisive, Inc., Baton Rouge, LA (United States); Ellingson, William A. [Argonne National Laboratory, Argonne, IL(United States); Meitzler, Thomas J. [US Army Research and Development Command Tank Automotive Research Development and Engineering Center, Warren, MI (United States); Green, William [US Army Research Laboratory, Aberdeen Proving Ground, MD (United States)

2011-06-23T23:59:59.000Z

71

3742 IEEE TRANSACTIONS ON GEOSCIENCE AND REMOTE SENSING, VOL. 47, NO. 11, NOVEMBER 2009 Microwave Radiometer Radio-Frequency  

E-Print Network [OSTI]

Radiometer Radio-Frequency Interference Detection Algorithms: A Comparative Study Sidharth Misra, Priscilla N is with Halliburton Energy Services, Houston, TX 77032 USA. J. R. Piepmeier is with the Microwave Instrument growth recently in satellite telecommunica- tion, in high-bandwidth point-to-point terrestrial wireless

Ruf, Christopher

72

High power microwave generator  

DOE Patents [OSTI]

A microwave generator efficiently converts the energy of an intense relativistic electron beam (REB) into a high-power microwave emission using the Smith-Purcell effect which is related to Cerenkov radiation. Feedback for efficient beam bunching and high gain is obtained by placing a cylindrical Smith-Purcell transmission grating on the axis of a toroidal resonator. High efficiency results from the use of a thin cold annular highly-magnetized REB that is closely coupled to the resonant structure.

Ekdahl, C.A.

1983-12-29T23:59:59.000Z

73

Technology Licensing | ornl.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatus TomAboutManusScience and How To License ORNL Technologies

74

Microwave Photonic Integrated Circuits for Millimeter-Wave Wireless Communications  

E-Print Network [OSTI]

transmission system," Opt. Express 20, pp. 1769- 1774 (2012) [12] M. Smit, X. Leijtens, E. Bente, J. van der Tol, H. Ambrosius, D. Robbins, M. Wale, N. Grote, M. Schell, "Generic foundry model for InP-based photonics," IET Optoelectronics, vol.5, no.5, pp...

Carpintero, G.; Balakier, K.; Yang, Z.; Guzmán, R.C.; Corradi, A.; Jimenez, A.; Kervella, G.; Fice, M.J.; Lamponi, M.; Chitoui, M.; van Dijk, F.; Renaud, C. C.; Wonfor, A.; Bente, E.A.J.M.; Penty, R.V.; White, I.H.; Seeds, A. J.

2014-05-06T23:59:59.000Z

75

Network coded wireless architecture  

E-Print Network [OSTI]

Wireless mesh networks promise cheap Internet access, easy deployment, and extended range. In their current form, however, these networks suffer from both limited throughput and low reliability; hence they cannot meet the ...

Katti, Sachin Rajsekhar

2008-01-01T23:59:59.000Z

76

High-Efficiency Harmonically-Terminated Rectifier for Wireless Powering Applications Michael Roberg, Erez Falkenstein and Zoya Popovic  

E-Print Network [OSTI]

, Erez Falkenstein and Zoya Popovic Department of Electrical, Computer and Energy Engineering, University effect on overall system efficiency. This paper presents an approach to high-efficiency microwave high-power directive wireless beaming, e.g. [I], and low-power harvesting, e.g. [2]. Other applications

Popovic, Zoya

77

1634 IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, VOL. 12, 2013 A Compact Dual-Band Rectenna Using Slot-Loaded  

E-Print Network [OSTI]

, dual-band rectenna, dual-band rectifier, energy harvesting, wireless power transmission. I bands, RF energy harvesters capable of operating in multiple bands are of great importance. Nowadays by a microwave signal of available power of 9 dBm for a load resistor of 2.2 k . Index Terms--Dipole antenna

Tentzeris, Manos

78

1610 IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, VOL. 11, 2012 MRI-Derived 3-D-Printed Breast Phantom  

E-Print Network [OSTI]

1610 IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, VOL. 11, 2012 MRI-Derived 3-D-Printed Breast--We propose a 3-D-printed breast phantom for use in preclinical experimental microwave imaging studies the proce- dure for generating the 3-D-printed breast phantom and present the measured dielectric properties

Hagness, Susan C.

79

Chapters 6 & 8 Wireless Networks  

E-Print Network [OSTI]

for sending packets between wired network and wireless host(s) in its "area" e.g., cell towers, 802.11 access protocol coordinates link access various data rates, transmission distance Elements of a wireless network

Lu, Enyue "Annie"

80

Video transmission over wireless networks  

E-Print Network [OSTI]

Compressed video bitstream transmissions over wireless networks are addressed in this work. We first consider error control and power allocation for transmitting wireless video over CDMA networks in conjunction with multiuser detection. We map a...

Zhao, Shengjie

2005-08-29T23:59:59.000Z

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Anomalous Microwave Emission  

E-Print Network [OSTI]

Improved knowledge of diffuse Galactic emission is important to maximize the scientific return from scheduled CMB anisotropy missions. Cross-correlation of microwave maps with maps of the far-IR dust continuum show a ubiquitous microwave emission component whose spatial distribution is traced by far-IR dust emission. The spectral index of this emission, beta_{radio} = -2.2 (+0.5 -0.7) is suggestive of free-free emission but does not preclude other candidates. Comparison of H-alpha and microwave results show that both data sets have positive correlations with the far-IR dust emission. Microwave data, however, are consistently brighter than can be explained solely from free-free emission traced by H-alpha. This ``anomalous'' microwave emission can be explained as electric dipole radiation from small spinning dust grains. The anomalous component at 53 GHz is 2.5 times as bright as the free-free emission traced by H-alpha, providing an approximate normalization for models with significant spinning dust emission.

A. Kogut

1999-02-22T23:59:59.000Z

82

Microwave and Radio Frequency Workshop  

Broader source: Energy.gov [DOE]

At the Microwave and Radio Frequency Workshop (held in Long Beach, CA, on July 25, 2012), academic and industry experts discussed the existing and emerging electrotechnologies – such as microwave ...

83

IEEE TRANSACTIONS ON WIRELESS COMMUNICATIONS, VOL. 12, NO. 10, OCTOBER 2013 5223 Spectrum Sharing Single-Carrier in the Presence of  

E-Print Network [OSTI]

- carrier transmission, spectrum sharing. I. INTRODUCTION COGNITIVE RADIO (CR) network with spectrum- sharing, where the secondary user (SU) is able to share the same radio medium licensed to the primary userIEEE TRANSACTIONS ON WIRELESS COMMUNICATIONS, VOL. 12, NO. 10, OCTOBER 2013 5223 Spectrum Sharing

Elkashlan, Maged

84

Reconfigurable Wireless Interface for Networking Sensors (ReWINS)  

E-Print Network [OSTI]

, Rajit Gadh {harish, bsp, gadh}@wireless.ucla.edu Wireless Internet for the Mobile Enterprise Consortium

California at Los Angeles, University of

85

NASA Partners License Nanotube Technology for Commercial Use...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

prnewswire.comnews-releasesnasa-partners-license-nanotube-technology-for-commercial-use-149724205.html Submitted: Tuesday, May...

86

Variable frequency microwave furnace system  

DOE Patents [OSTI]

A variable frequency microwave furnace system (10) designed to allow modulation of the frequency of the microwaves introduced into a furnace cavity (34) for testing or other selected applications. The variable frequency microwave furnace system (10) includes a microwave signal generator (12) or microwave voltage-controlled oscillator (14) for generating a low-power microwave signal for input to the microwave furnace. A first amplifier (18) may be provided to amplify the magnitude of the signal output from the microwave signal generator (12) or the microwave voltage-controlled oscillator (14). A second amplifier (20) is provided for processing the signal output by the first amplifier (18). The second amplifier (20) outputs the microwave signal input to the furnace cavity (34). In the preferred embodiment, the second amplifier (20) is a traveling-wave tube (TWT). A power supply (22) is provided for operation of the second amplifier (20). A directional coupler (24) is provided for detecting the direction of a signal and further directing the signal depending on the detected direction. A first power meter (30) is provided for measuring the power delivered to the microwave furnace (32). A second power meter (26) detects the magnitude of reflected power. Reflected power is dissipated in the reflected power load (28).

Bible, Don W. (Clinton, TN); Lauf, Robert J. (Oak Ridge, TN)

1994-01-01T23:59:59.000Z

87

Variable frequency microwave furnace system  

DOE Patents [OSTI]

A variable frequency microwave furnace system designed to allow modulation of the frequency of the microwaves introduced into a furnace cavity for testing or other selected applications. The variable frequency microwave furnace system includes a microwave signal generator or microwave voltage-controlled oscillator for generating a low-power microwave signal for input to the microwave furnace. A first amplifier may be provided to amplify the magnitude of the signal output from the microwave signal generator or the microwave voltage-controlled oscillator. A second amplifier is provided for processing the signal output by the first amplifier. The second amplifier outputs the microwave signal input to the furnace cavity. In the preferred embodiment, the second amplifier is a traveling-wave tube (TWT). A power supply is provided for operation of the second amplifier. A directional coupler is provided for detecting the direction of a signal and further directing the signal depending on the detected direction. A first power meter is provided for measuring the power delivered to the microwave furnace. A second power meter detects the magnitude of reflected power. Reflected power is dissipated in the reflected power load. 5 figs.

Bible, D.W.; Lauf, R.J.

1994-06-14T23:59:59.000Z

88

Local microwave background radiation  

E-Print Network [OSTI]

An inquiry on a possible local origin for the Microwave Background Radiation is made. Thermal MBR photons are contained in a system called {\\it magnetic bottle} which is due to Earth magnetic field and solar wind particles, mostly electrons. Observational tests are anticipated.

Domingos Soares

2014-11-13T23:59:59.000Z

89

Non -commercial License 1. INTENT/PURPOSE  

E-Print Network [OSTI]

licensee to commercialize the software or any derivative work of the software. 8. FEE/ROYALTY Licensee pays no royalty for non-commercial license Licensee and any third parties must enter a new agreement

Barthe, Loïc

90

City of Dubuque- Solar Thermal Licensing Requirement  

Broader source: Energy.gov [DOE]

The City of Dubuque requires a Solar Thermal License in order for a person to install a solar thermal project on a home or business. The requirement does not apply to solar photovoltaics. The...

91

Argument licensing and agreement in Zulu  

E-Print Network [OSTI]

In this thesis, I examine some core grammatical phenomena - case licensing, agreement, the EPP - through the lens of the Bantu language Zulu. Zulu has a number of remarkable and puzzling properties whose analysis affords ...

Halpert, Claire

2012-01-01T23:59:59.000Z

92

Insecurity of Wireless Networks  

SciTech Connect (OSTI)

Wireless is a powerful core technology enabling our global digital infrastructure. Wi-Fi networks are susceptible to attacks on Wired Equivalency Privacy, Wi-Fi Protected Access (WPA), and WPA2. These attack signatures can be profiled into a system that defends against such attacks on the basis of their inherent characteristics. Wi-Fi is the standard protocol for wireless networks used extensively in US critical infrastructures. Since the Wired Equivalency Privacy (WEP) security protocol was broken, the Wi-Fi Protected Access (WPA) protocol has been considered the secure alternative compatible with hardware developed for WEP. However, in November 2008, researchers developed an attack on WPA, allowing forgery of Address Resolution Protocol (ARP) packets. Subsequent enhancements have enabled ARP poisoning, cryptosystem denial of service, and man-in-the-middle attacks. Open source systems and methods (OSSM) have long been used to secure networks against such attacks. This article reviews OSSMs and the results of experimental attacks on WPA. These experiments re-created current attacks in a laboratory setting, recording both wired and wireless traffic. The article discusses methods of intrusion detection and prevention in the context of cyber physical protection of critical Internet infrastructure. The basis for this research is a specialized (and undoubtedly incomplete) taxonomy of Wi-Fi attacks and their adaptations to existing countermeasures and protocol revisions. Ultimately, this article aims to provide a clearer picture of how and why wireless protection protocols and encryption must achieve a more scientific basis for detecting and preventing such attacks.

Sheldon, Frederick T [ORNL; Weber, John Mark [Dynetics, Inc.; Yoo, Seong-Moo [University of Alabama, Huntsville; Pan, W. David [University of Alabama, Huntsville

2012-01-01T23:59:59.000Z

93

Analysis of microwave leaky modes propagating through laser plasma filaments column waveguide  

SciTech Connect (OSTI)

A plasma column waveguide formed by a bundle of closely spaced plasma filaments induced by the propagation of ultrafast laser pulses in air and revived by a longer infrared laser pulse is shown to support microwave radiation. We consider values of both the plasma electron density and microwave frequency for which the refractive index of plasma is lower than the refractive index of air; therefore, a leaky plasma waveguide can be realized in extremely high frequency band. The guiding mechanism does not require high conductance of the plasma and can be easily excited by using commercial femtosecond laser sources. A theoretical study of leaky mode characteristics of isotropic and homogeneous plasma column waveguides is investigated with several values of plasma and waveguide structure parameters. The microwave transmission loss was found to be mainly caused by the microwave leakage through the air-plasma interface and is weakly dependent on the plasma absorption. In spite of losses of microwaves caused by leakage and plasma absorption, it is shown to be much lower than both that accompanying to surface waves attaching to single conducting plasma wire and the free space propagation over distances in the order of the filament length, which opens exciting perspectives for short distance point to point wireless transmission of pulsed-modulated microwaves.

Alshershby, Mostafa; Hao Zuoqiang; Lin Jingquan [School of Science, Changchun University of Science and Technology, Changchun 130022 (China)

2012-12-15T23:59:59.000Z

94

920 IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, VOL. 62, NO. 4, APRIL 2014 Field Distribution Models of Spiral Coil for  

E-Print Network [OSTI]

920 IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, VOL. 62, NO. 4, APRIL 2014 Field of implant that has a much smaller size provides a means to find the optimal location and angle to harvest maximum energy. The analysis method for near-field wireless power transmission can be utilized

Chiao, Jung-Chih

95

684 IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, VOL. 57, NO. 3, MARCH 2009 Synthesis Design of Ultra-Wideband Bandpass Filters  

E-Print Network [OSTI]

and fabricated to confirm the theoretical predictions. Index Terms--Bandpass filter, equal-ripple response academic and industrial areas toward ultra-wideband technology. As a key component in the ultra-wideband wireless communication sys- tems, microwave bandpass filters with high performance, com- pact size, and low

Leung, Ka-Cheong

96

ANTENNAS AND WIRELESS PROPAGATION LETTERS, VOL. X, NO. X, JANUARY 2013 1 MRI-derived 3D-printed breast phantom for  

E-Print Network [OSTI]

ANTENNAS AND WIRELESS PROPAGATION LETTERS, VOL. X, NO. X, JANUARY 2013 1 MRI-derived 3D-printed--We propose a 3D-printed breast phantom for use in pre-clinical experimental microwave imaging studies the procedure for generating the 3D-printed breast phantom and present the measured dielectric properties

Van Veen, Barry D.

97

License for the Konrad Deep Geological Repository  

SciTech Connect (OSTI)

Deep geological disposal of long-lived radioactive waste is currently considered a major challenge. Until present, only three deep geological disposal facilities have worldwide been operated: the Asse experimental repository (1967-1978) and the Morsleben repository (1971-1998) in Germany as well as the Waste Isolation Pilot Plant (WIPP) in the USA (1999 to present). Recently, the licensing procedure for the fourth such facility, the German Konrad repository, ended with a positive ''Planfeststellung'' (plan approval). With its plan approval decision, the licensing authority, the Ministry of the Environment of the state of Lower Saxony, approved the single license needed pursuant to German law to construct, operate, and later close down this facility.

Biurrun, E.; Hartje, B.

2003-02-24T23:59:59.000Z

98

Kirkland gets license in hot Philippines area  

SciTech Connect (OSTI)

This paper reports that Kirkland As, Oslo, has received a geophysical survey and exploration contract (GSEC) in a sizzling exploration and development theater off the Philippines. The license covers about 6,000 sq miles of undisputed waters, with depths mostly less than 300 ft, and lies in the Reed Bank area off Northwest Palawan Island, where several major oil and gas strikes have been made recently. Kirkland has 1 year in which to carry out its seismic work commitment. The terms of the GSEC then give an option to drill one well in a 6 month period. Once the results have been analyzed, the company can either drill another well or enter into a service contract for the license. Kirkland has a 65% share in the license, with the remainder split between Philippine companies Philodrill Corp., Beguet Mining Corp. subsidiary Petrofields, and Seafront Resources Corp. The Philippines is one of Kirkland's main areas of activity, the Kirkland Commercial Manager Ralph Baxter.

Kirkland, A.S.

1992-08-03T23:59:59.000Z

99

Display Size Wireless LAN  

E-Print Network [OSTI]

.) - Security sofware ­ESET Smart Security. No Reuse PC with English OS for this time. PC PC Code Image Brand PC PC Code Image Brand Model F008 Panasonic CF-W2 Pentium733 M 1.10GHz 256MB 40GB 12.1 inch 1.0kg System Memory HDD Display Size Weight OS Accessory LAN Wireless LAN Remarks PC PC Code Image Brand

Katsumoto, Shingo

100

R&K Cyber Solutions licenses ORNL malware detection technology...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

R&K Cyber Solutions licenses ORNL malware detection technology R&K Cyber Solutions LLC has licensed Hyperion, a cyber security technology from the Department of Energy's Oak Ridge...

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Wireless LAN E001 Fujitsu  

E-Print Network [OSTI]

PC Code Image Brand Model 1 / 5 #12; CPU System Memory HDD Display Size Weight OS Accessory LAN Wireless LAN Remarks PC PC Code Image Brand Model E008 EPSON Endeavor NT331 Celeron M1.40GHz LAN Wireless LAN Remarks PC PC Code Image Brand Model E019 EPSON Endeavor NT331 Celeron M1.40GHz

Katsumoto, Shingo

102

Wireless LAN G001 Panasonic  

E-Print Network [OSTI]

Office MicrosoftOffice OSPC PC PC Code Image Brand Model All Reuse Note PC contain these software LAN Wireless LAN Remarks PC PC Code Image Brand Model G007 Panasonic CF-R7 Core2 Duo U7700 1 Accessory LAN Wireless LAN Remarks PC PC Code Image Brand Model G015 NEC Versa PC- VJ14MEFUW Celeron M

Katsumoto, Shingo

103

Proactive mobile wireless networks : an infrastructureless wireless network architecture for delay-sensitive applications  

E-Print Network [OSTI]

Infrastructureless wireless networks are an important class of wireless networks that is best suited for scenarios where there is temporary and localized telecommunication demand. Such networks consist of wireless devices ...

Dai, Lillian Lei, 1978-

2008-01-01T23:59:59.000Z

104

Microwave hematoma detector  

DOE Patents [OSTI]

The Microwave Hematoma Detector is a non-invasive device designed to detect and localize blood pooling and clots near the outer surface of the body. While being geared towards finding sub-dural and epi-dural hematomas, the device can be used to detect blood pooling anywhere near the surface of the body. Modified versions of the device can also detect pneumothorax, organ hemorrhage, atherosclerotic plaque in the carotid arteries, evaluate perfusion (blood flow) at or near the body surface, body tissue damage at or near the surface (especially for burn assessment) and be used in a number of NDE applications. The device is based on low power pulsed microwave technology combined with a specialized antenna, signal processing/recognition algorithms and a disposable cap worn by the patient which will facilitate accurate mapping of the brain and proper function of the instrument. The invention may be used for rapid, non-invasive detection of sub-dural or epi-dural hematoma in human or animal patients, detection of hemorrhage within approximately 5 cm of the outer surface anywhere on a patient's body.

Haddad, Waleed S. (Dublin, CA); Trebes, James E. (Livermore, CA); Matthews, Dennis L. (Moss Beach, CA)

2001-01-01T23:59:59.000Z

105

Patent Licensing to Bertrand Competitors Benny Moldovanuy  

E-Print Network [OSTI]

Patent Licensing to Bertrand Competitors¤ Benny Moldovanuy and Aner Selaz April 18, 2001 Abstract A cost-reducing process innovation protected by a patent is sold to one of several ...rms engaged to patent races frameworks. An auction where the lowest bidder gets the patent is shown to be e¢cient. ¤ We

Franz, Sven Oliver

106

SUMMARY OF AVC/H.264 LICENSE TERMS1 The AVC Patent Portfolio License is divided into two principal parts (see Diagram): (a)  

E-Print Network [OSTI]

SUMMARY OF AVC/H.264 LICENSE TERMS1 The AVC Patent Portfolio License is divided into two principal and may not be relied upon for any purpose. The AVC Patent Portfolio License provides the actual terms of license on which users may rely. 2 Sections 2.1 and 2.6 of the AVC Patent Portfolio License 3 Sections 2

Rodriguez, Carlos

107

Wireless device monitoring methods, wireless device monitoring systems, and articles of manufacture  

DOE Patents [OSTI]

Wireless device monitoring methods, wireless device monitoring systems, and articles of manufacture are described. According to one embodiment, a wireless device monitoring method includes accessing device configuration information of a wireless device present at a secure area, wherein the device configuration information comprises information regarding a configuration of the wireless device, accessing stored information corresponding to the wireless device, wherein the stored information comprises information regarding the configuration of the wireless device, comparing the device configuration information with the stored information, and indicating the wireless device as one of authorized and unauthorized for presence at the secure area using the comparing.

McCown, Steven H. (Rigby, ID); Derr, Kurt W. (Idaho Falls, ID); Rohde, Kenneth W. (Idaho Falls, ID)

2012-05-08T23:59:59.000Z

108

Wireless passive radiation sensor  

DOE Patents [OSTI]

A novel measurement technique is employed using surface acoustic wave (SAW) devices, passive RF, and radiation-sensitive films to provide a wireless passive radiation sensor that requires no batteries, outside wiring, or regular maintenance. The sensor is small (<1 cm.sup.2), physically robust, and will operate unattended for decades. In addition, the sensor can be insensitive to measurement position and read distance due to a novel self-referencing technique eliminating the need to measure absolute responses that are dependent on RF transmitter location and power.

Pfeifer, Kent B; Rumpf, Arthur N; Yelton, William G; Limmer, Steven J

2013-12-03T23:59:59.000Z

109

Licensing plan for UMTRA project disposal sites. Final [report  

SciTech Connect (OSTI)

The Uranium Mill Tailings Remedial Action (UMTRA) Project Office developed a plan to define UMTRA Project licensing program objectives and establish a process enabling the DOE to document completion of remedial actions in compliance with 40 CFR 1 92 and the requirements of the NRC general license. This document supersedes the January 1987 Project Licensing Plan (DOE, 1987). The plan summarizes the legislative and regulatory basis for licensing, identifies participating agencies and their roles and responsibilities, defines key activities and milestones in the licensing process, and details the coordination of these activities. This plan provides an overview of the UMTRA Project from the end of remedial actions through the NRC`s acceptance of a disposal site under the general license. The licensing process integrates large phases of the UMTRA Project. Other programmatic UMTRA Project documents listed in Section 6.0 provide supporting information.

Not Available

1993-09-01T23:59:59.000Z

110

Gigatron microwave amplifier  

DOE Patents [OSTI]

An electron tube for achieving high power at high frequency with high efficiency, including an input coupler, a ribbon-shaped electron beam and a traveling wave output coupler. The input coupler is a lumped constant resonant circuit that modulates a field emitter array cathode at microwave frequency. A bunched ribbon electron beam is emitted from the cathode in periodic bursts at the desired frequency. The beam has a ribbon configuration to eliminate limitations inherent in round beam devices. The traveling wave coupler efficiently extracts energy from the electron beam, and includes a waveguide with a slot therethrough for receiving the electron beam. The ribbon beam is tilted at an angle with respect to the traveling wave coupler so that the electron beam couples in-phase with the traveling wave in the waveguide. The traveling wave coupler thus extracts energy from the electron beam over the entire width of the beam.

McIntyre, Peter M. (611 Montclair, College Station, TX 77840)

1993-01-01T23:59:59.000Z

111

Gigatron microwave amplifier  

DOE Patents [OSTI]

An electron tube for achieving high power at high frequency with high efficiency is described, including an input coupler, a ribbon-shaped electron beam and a traveling wave output coupler. The input coupler is a lumped constant resonant circuit that modulates a field emitter array cathode at microwave frequency. A bunched ribbon electron beam is emitted from the cathode in periodic bursts at the desired frequency. The beam has a ribbon configuration to eliminate limitations inherent in round beam devices. The traveling wave coupler efficiently extracts energy from the electron beam, and includes a waveguide with a slot there through for receiving the electron beam. The ribbon beam is tilted at an angle with respect to the traveling wave coupler so that the electron beam couples in-phase with the traveling wave in the waveguide. The traveling wave coupler thus extracts energy from the electron beam over the entire width of the beam.

McIntyre, P.M.

1993-07-13T23:59:59.000Z

112

Cosmic Microwave Background Polarization  

E-Print Network [OSTI]

Cosmic microwave background (CMB) anisotropy is our richest source of cosmological information; the standard cosmological model was largely established thanks to study of the temperature anisotropies. By the end of the decade, the Planck satellite will close this important chapter and move us deeper into the new frontier of polarization measurements. Numerous ground--based and balloon--borne experiments are already forging into this new territory. Besides providing new and independent information on the primordial density perturbations and cosmological parameters, polarization measurements offer the potential to detect primordial gravity waves, constrain dark energy and measure the neutrino mass scale. A vigorous experimental program is underway worldwide and heading towards a new satellite mission dedicated to CMB polarization.

James G. Bartlett

2006-04-18T23:59:59.000Z

113

Microwave Regenerated DPF for Auxiliary Power Units and Diesel...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Microwave Regenerated DPF for Auxiliary Power Units and Diesel Hybrid Vehicles Microwave Regenerated DPF for Auxiliary Power Units and Diesel Hybrid Vehicles Microwave regeneration...

114

Wireless Power Transfer  

SciTech Connect (OSTI)

Wireless Power Transfer is an innovative approach using magnetic resonance coupling of air core transformers designed for today's growing plug-in electric vehicle market. This technology can provide a convenient, safe and flexible means to charge electric vehicles under stationary and dynamic conditions. Plug-in Electric Vehicles (PEV) are burdened by the need for cable and plug charger, galvanic isolation of the on-board electronics, bulk and cost of this charger and the large energy storage system (ESS) packs needed. With a system where you have to physically plug in there are a number of occasions where the owner could very well forget to charge the vehicle. For stationary applications (like charging of a PHEV at home), ORNL's innovative wireless power transfer technology adds a convenience factor compared to actually plugging in which will mean that the vehicle will have a full charge every morning. Electric vehicle charging must be safe, compact and efficient in order to be convenient for customers. By reconfiguring the transformer and altering the resonance frequency, energy is transferred to the battery with lower energy losses and with fewer demands on the primary circuit by the rest of the transformer system. The ORNL discovery shows that sufficient power for the battery can be transferred from the primary to secondary circuits without significant energy losses if the operating frequency is set at 50% to 95% of the resonance frequency of the circuit. The electrical power is then transmitted to the chargeable battery, which is electrically coupled to the secondary circuit through the air core transformer. Some advantages include: Reduced energy losses during transfer of energy to the battery; A charge potential that is relatively unaffected by up to 25% misalignment of vehicle; and Other receiving components draw less power from the primary circuit. These advantages allow wireless power technology applications to expand at the workplace and beyond as the demand for EV rises. For vehicles that operate over a fixed route such as busses and shuttle vehicles, Wireless Power Transfer (WPT) means that a smaller battery pack can be used. In the traditional system, the battery pack is designed to accommodate the needs of the entire route or shift. With WPT the battery can be downsized because it can be charged when the vehicle stops on its route (a rental car shuttle bus, for example, can charge when it waits in the terminal and again when it waits at the rental car place. Thus the battery only needs enough charge to get to the next stop. This decrease in battery size means significant cost savings to electrify the vehicle. This technology enables efficient "opportunity charging stations" for predefined routes and planned stops reducing down time. Charging can occur in minutes. This improvement also eliminates the harmful emissions that occur in garages while buses are at idle during charging. In larger cities, dynamic charging offers an even greater impact utilizing existing infrastructure. As vehicles travel along busy freeways and interstate systems, wireless charging can occur while the vehicle is in motion. With this technology a vehicle essentially has unlimited electric range while using a relatively small battery pack. In-motion charging stations use vehicle sensors to alert the driver. Traveling at normal speeds, sensors establish in-motion charging. WPT transmit pads sequentially energize to the negotiated power level based on vehicle speed and its requested charging energy. Lower power when vehicle speed is slow and much higher power for faster moving vehicles. Vehicle to Infrastructure communications (V2I) coordinates WPT charging level according to on-board battery pack state-of-charge. V2I activates the roadway transmit pads placing them in standby mode and negotiates charging fee based on prevailing grid rate and vehicle energy demand. Dynamic charging would allow electricity to supply a very large fraction of the energy for the transportation sector and reduce greatly petroleum consump

None

2013-07-22T23:59:59.000Z

115

Wireless Power Transfer  

ScienceCinema (OSTI)

Wireless Power Transfer is an innovative approach using magnetic resonance coupling of air core transformers designed for today's growing plug-in electric vehicle market. This technology can provide a convenient, safe and flexible means to charge electric vehicles under stationary and dynamic conditions. Plug-in Electric Vehicles (PEV) are burdened by the need for cable and plug charger, galvanic isolation of the on-board electronics, bulk and cost of this charger and the large energy storage system (ESS) packs needed. With a system where you have to physically plug in there are a number of occasions where the owner could very well forget to charge the vehicle. For stationary applications (like charging of a PHEV at home), ORNL's innovative wireless power transfer technology adds a convenience factor compared to actually plugging in which will mean that the vehicle will have a full charge every morning. Electric vehicle charging must be safe, compact and efficient in order to be convenient for customers. By reconfiguring the transformer and altering the resonance frequency, energy is transferred to the battery with lower energy losses and with fewer demands on the primary circuit by the rest of the transformer system. The ORNL discovery shows that sufficient power for the battery can be transferred from the primary to secondary circuits without significant energy losses if the operating frequency is set at 50% to 95% of the resonance frequency of the circuit. The electrical power is then transmitted to the chargeable battery, which is electrically coupled to the secondary circuit through the air core transformer. Some advantages include: Reduced energy losses during transfer of energy to the battery; A charge potential that is relatively unaffected by up to 25% misalignment of vehicle; and Other receiving components draw less power from the primary circuit. These advantages allow wireless power technology applications to expand at the workplace and beyond as the demand for EV rises. For vehicles that operate over a fixed route such as busses and shuttle vehicles, Wireless Power Transfer (WPT) means that a smaller battery pack can be used. In the traditional system, the battery pack is designed to accommodate the needs of the entire route or shift. With WPT the battery can be downsized because it can be charged when the vehicle stops on its route (a rental car shuttle bus, for example, can charge when it waits in the terminal and again when it waits at the rental car place. Thus the battery only needs enough charge to get to the next stop. This decrease in battery size means significant cost savings to electrify the vehicle. This technology enables efficient "opportunity charging stations" for predefined routes and planned stops reducing down time. Charging can occur in minutes. This improvement also eliminates the harmful emissions that occur in garages while buses are at idle during charging. In larger cities, dynamic charging offers an even greater impact utilizing existing infrastructure. As vehicles travel along busy freeways and interstate systems, wireless charging can occur while the vehicle is in motion. With this technology a vehicle essentially has unlimited electric range while using a relatively small battery pack. In-motion charging stations use vehicle sensors to alert the driver. Traveling at normal speeds, sensors establish in-motion charging. WPT transmit pads sequentially energize to the negotiated power level based on vehicle speed and its requested charging energy. Lower power when vehicle speed is slow and much higher power for faster moving vehicles. Vehicle to Infrastructure communications (V2I) coordinates WPT charging level according to on-board battery pack state-of-charge. V2I activates the roadway transmit pads placing them in standby mode and negotiates charging fee based on prevailing grid rate and vehicle energy demand. Dynamic charging would allow electricity to supply a very large fraction of the energy for the transportation sector and reduce greatly petroleum consump

None

2013-11-19T23:59:59.000Z

116

E-Print Network 3.0 - ad-hoc wireless sensor Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in wireless sensor networks The rapid progress of wireless communication and embedded micro-sensing MEMS... technologies has made wireless sensor networks possible. A wireless...

117

NRC antitrust licensing actions, 1978--1996  

SciTech Connect (OSTI)

NUREG-0447, Antitrust Review of Nuclear Power Plants, was published in May 1978 and includes a compilation and discussion of U.S. Nuclear Regulatory Commission (NRC) proceedings and activity involving the NRC`s competitive review program through February 1978, NUREG-0447 is an update of an earlier discussion of the NRC`s antitrust review of nuclear power plants, NR-AIG-001, The US Nuclear Regulatory Commission`s Antitrust Review of Nuclear Power Plants: The Conditioning of Licenses, which reviewed the Commission`s antitrust review function from its inception in December 1970 through April 1976. This report summarizes the support provided to NRC staff in updating the compilation of the NRC`s antitrust licensing review activities for commercial nuclear power plants that have occurred since February 1978. 4 refs., 4 tabs.

Mayer, S.J.; Simpson, J.J.

1997-09-01T23:59:59.000Z

118

Embracing interference in wireless systems  

E-Print Network [OSTI]

The wireless medium is a shared resource. If nearby devices transmit at the same time, their signals interfere, resulting in a collision. In traditional networks, collisions cause the loss of the transmitted information. ...

Gollakota, Shyamnath (Shyamnath Venkata Satyasrisai)

2013-01-01T23:59:59.000Z

119

Universal Wireless Event Monitoring System  

E-Print Network [OSTI]

of remote query sensor systems have been investigated and various products have been developed for sensing different applications like water leakage, temperature, pressure, gas, diaper wetting etc [2-7]. The wireless link in these systems which is needed...-9]. One of the means of remote query sensing is the direct measurement of impedance of antenna which is wirelessly connected to the sensor. By measuring the impedance of the antenna using instrument like Impedance analyzer or network analyzer, the exact...

Yambem, Lamyanba

2012-10-19T23:59:59.000Z

120

Communications device identification methods, communications methods, wireless communications readers, wireless communications systems, and articles of manufacture  

DOE Patents [OSTI]

Communications device identification methods, communications methods, wireless communications readers, wireless communications systems, and articles of manufacture are described. In one aspect, a communications device identification method includes providing identification information regarding a group of wireless identification devices within a wireless communications range of a reader, using the provided identification information, selecting one of a plurality of different search procedures for identifying unidentified ones of the wireless identification devices within the wireless communications range, and identifying at least some of the unidentified ones of the wireless identification devices using the selected one of the search procedures.

Steele, Kerry D [Kennewick, WA; Anderson, Gordon A [Benton City, WA; Gilbert, Ronald W [Morgan Hill, CA

2011-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Energy and quality scalable wireless communication  

E-Print Network [OSTI]

Nodes for emerging, high-density wireless networks will face the dual challenges of continuous, multi-year operation under diverse and challenging operating conditions. The wireless communication subsystem, a substantial ...

Min, Rex K. (Rex Kee), 1976-

2003-01-01T23:59:59.000Z

122

Wireless, automated monitoring for potential landslide hazards  

E-Print Network [OSTI]

This thesis describes research efforts toward the development of a wireless sensor node, which can be employed in durable and expandable wireless sensor networks for remote monitoring of soil conditions in areas conducive to slope stability failures...

Garich, Evan Andrew

2007-09-17T23:59:59.000Z

123

A miniature, implantable wireless neural stimulation system  

E-Print Network [OSTI]

In this thesis, I present the design of a wireless neural stimulation system. The system consists of an external transmitter, controllable through a computer interface, and a miniature, implantable wireless receiver and ...

Arfin, Scott K. (Scott Kenneth)

2006-01-01T23:59:59.000Z

124

Wireless device monitoring systems and monitoring devices, and associated methods  

DOE Patents [OSTI]

Wireless device monitoring systems and monitoring devices include a communications module for receiving wireless communications of a wireless device. Processing circuitry is coupled with the communications module and configured to process the wireless communications to determine whether the wireless device is authorized or unauthorized to be present at the monitored area based on identification information of the wireless device. Methods of monitoring for the presence and identity of wireless devices are also provided.

McCown, Steven H; Derr, Kurt W; Rohde, Kenneth W

2014-05-27T23:59:59.000Z

125

Transformative Learning Experiences of Oklahoma Child Care Licensing Specialists.  

E-Print Network [OSTI]

??The purpose of this study was to understand and describe the transformational educational experiences of Oklahoma child care licensing workers who are currently or were… (more)

Averill, Sherry Gale

2006-01-01T23:59:59.000Z

126

Y-12 cleaning technology licensed by Knoxville engineering firm...  

National Nuclear Security Administration (NNSA)

cleaning technology licensed by Knoxville engineering firm | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile...

127

ORNL's Alumina-forming Austenitic Alloys Licensed to Carpenter...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technology Corporation November 30, 2010 Carpenter Technology Corporation has licensed a new alloy developed at the Oak Ridge National Laboratory. Carpenter Technology Corporation...

128

Microsoft Word - Technical Safety and Licensing Issues _Final...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

event is neither necessary nor desirable in implementing the safety design philosophy of the NGNP and modular HTRs. The strategy to license this approach with the...

129

SLAC All Access: Vacuum Microwave Device Department  

ScienceCinema (OSTI)

The Vacuum Microwave Device Department (VMDD) builds the devices that make SLAC's particle accelerators go. These devices, called klystrons, generate intense waves of microwave energy that rocket subatomic particles up to nearly the speed of light.

Haase, Andy

2014-06-13T23:59:59.000Z

130

Ignition methods and apparatus using microwave energy  

DOE Patents [OSTI]

An ignition apparatus for a combustor includes a microwave energy source that emits microwave energy into the combustor at a frequency within a resonant response of the combustor, the combustor functioning as a resonant cavity for the microwave energy so that a plasma is produced that ignites a combustible mixture therein. The plasma preferably is a non-contact plasma produced in free space within the resonant cavity spaced away from with the cavity wall structure and spaced from the microwave emitter.

DeFreitas, Dennis Michael (Oxford, NY); Migliori, Albert (Santa Fe, NM)

1997-01-01T23:59:59.000Z

131

Microwavable thermal energy storage material  

DOE Patents [OSTI]

A microwavable thermal energy storage material is provided which includes a mixture of a phase change material and silica, and a carbon black additive in the form of a conformable dry powder of phase change material/silica/carbon black, or solid pellets, films, fibers, moldings or strands of phase change material/high density polyethylene/ethylene-vinyl acetate/silica/carbon black which allows the phase change material to be rapidly heated in a microwave oven. The carbon black additive, which is preferably an electrically conductive carbon black, may be added in low concentrations of from 0.5 to 15% by weight, and may be used to tailor the heating times of the phase change material as desired. The microwavable thermal energy storage material can be used in food serving applications such as tableware items or pizza warmers, and in medical wraps and garments.

Salyer, Ival O. (Dayton, OH)

1998-09-08T23:59:59.000Z

132

Microwavable thermal energy storage material  

DOE Patents [OSTI]

A microwavable thermal energy storage material is provided which includes a mixture of a phase change material and silica, and a carbon black additive in the form of a conformable dry powder of phase change material/silica/carbon black, or solid pellets, films, fibers, moldings or strands of phase change material/high density polyethylene/ethylene vinyl acetate/silica/carbon black which allows the phase change material to be rapidly heated in a microwave oven. The carbon black additive, which is preferably an electrically conductive carbon black, may be added in low concentrations of from 0.5 to 15% by weight, and may be used to tailor the heating times of the phase change material as desired. The microwavable thermal energy storage material can be used in food serving applications such as tableware items or pizza warmers, and in medical wraps and garments. 3 figs.

Salyer, I.O.

1998-09-08T23:59:59.000Z

133

Broadband patterned magnetic microwave absorber  

SciTech Connect (OSTI)

It is a tough task to greatly improve the working bandwidth for the traditional flat microwave absorbers because of the restriction of available material parameters. In this work, a simple patterning method is proposed to drastically broaden the absorption bandwidth of a conventional magnetic absorber. As a demonstration, an ultra-broadband microwave absorber with more than 90% absorption in the frequency range of 4–40 GHz is designed and experimentally realized, which has a thin thickness of 3.7?mm and a light weight equivalent to a 2-mm-thick flat absorber. In such a patterned absorber, the broadband strong absorption is mainly originated from the simultaneous incorporation of multiple ?/4 resonances and edge diffraction effects. This work provides a facile route to greatly extend the microwave absorption bandwidth for the currently available absorbing materials.

Li, Wei; Wu, Tianlong; Wang, Wei; Guan, Jianguo, E-mail: guanjg@whut.edu.cn [State Key Lab of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070 (China); Zhai, Pengcheng [School of Science, Wuhan University of Technology, Wuhan 430070 (China)

2014-07-28T23:59:59.000Z

134

Vehicles - ORNL inverter licensed ... | ornl.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500IIVasudha Patri MechanicalofVehicles - ORNL inverter licensed

135

NRC Licensing Strategy Development for the NGNP  

SciTech Connect (OSTI)

The Next Generation Nuclear Plant (NGNP) project will provide the basis for commercialization of a new generation of advanced nuclear plants that utilize hightemperature gas-cooled reactor (HTGR) technology. The inherently safe HTGR design characteristics can be utilized to supply high-temperature process heat, co-generated electricity, and/or hydrogen for a number of industrial applications (e.g., petrochemical processes). Completion of the NGNP will result in a facility that demonstrates the safety and economics of the design, the commercial industrial potential of the technology, and the viability of the licensing strategy.

Mark R. Holbrook; Trevor Cook

2008-09-01T23:59:59.000Z

136

Property:FERC License | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revisionEnvReviewNonInvasiveExploration Jump to: navigation,ExplorationPermitAgency-DrillingEzfeedflagFERC License

137

Microwave assisted centrifuge and related methods  

DOE Patents [OSTI]

Centrifuge samples may be exposed to microwave energy to heat the samples during centrifugation and to promote separation of the different components or constituents of the samples using a centrifuge device configured for generating microwave energy and directing the microwave energy at a sample located in the centrifuge.

Meikrantz, David H. (Idaho Falls, ID) [Idaho Falls, ID

2010-08-17T23:59:59.000Z

138

Microwave treatment of vulcanized rubber  

DOE Patents [OSTI]

A process and resulting product is provided in which a vulcanized solid particulate, such as vulcanized crumb rubber, has select chemical bonds broken by microwave radiation. The direct application of microwaves in combination with uniform heating of the crumb rubber renders the treated crumb rubber more suitable for use in new rubber formulations. As a result, larger particle sizes and/or loading levels of the treated crumb rubber can be used in new rubber mixtures to produce recycled composite products with good properties.

Wicks, George G. (Aiken, SC); Schulz, Rebecca L. (Aiken, SC); Clark, David E. (Gainesville, FL); Folz, Diane C. (Gainesville, FL)

2002-07-16T23:59:59.000Z

139

Microsoft Word - 10-18178_LicenseStructure_final _3_.docx  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

singlemultiple license(s); and multi-module license duration). Other related topics (See Section 1.7) may be addressed in future papers. 1.5 Statement of Issues The issues...

140

Licensing Support Network: An Electronic Discovery System  

SciTech Connect (OSTI)

The necessary authorization for the U. S. Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM) to submit a License Application (LA) is contingent upon the policy process defined in the Nuclear Waste Policy Act, as amended (NWPA), with some steps yet to occur. In spite of this uncertainty, the DOE must take prudent and appropriate action now, and over the next several years, to prepare for submittal of an application and to facilitate the U. S. Nuclear Regulatory Commission (NRC) review of this application, if the Yucca Mountain site is recommended and approved for repository development. One of these steps the DOE has taken involves working with the NRC's Advisory Review Panel to develop Licensing Support Network (LSN) requirements and guidelines. The NRC has made a prototype of the LSN web page available at www.LSNNET.gov. The OCRWM part of the LSN currently has an indefinite life cycle and may need to remain in existence until the repository is closed, which could be as long as 325 years.

Gil, A. V.; Jensen, D.; McKinnon, B.

2002-02-26T23:59:59.000Z

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Supercomputers Take a Cue From Microwave Ovens  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

many different licenses for different applications," says Shalf. "Just as the consumer electronics chip designers choose a set of processor characteristics appropriate to the...

142

The B & W Owners` Group Generic License Renewal Program  

SciTech Connect (OSTI)

Since the late 1970s, the Babcock & Wilcox (B & W) Owners Group (BWOG) has sponsored significant activities that address technical, economic, and licensing issues to ensure that the B & W nuclear steam supply system (NSSS) power plants operate until the end of their current plant licensed life and to preserve the license renewal option. It should be no surprise that the BWOG decided in late 1992 to aggressively pursue a license renewal effort. This effort, the Generic License Renewal Program (GLRP), has over the past 18 months contributed significantly to the industry`s license renewal initiative. The GLRP was established as a project with a full-time management organization within the BWOG structure. Its primary objective was the development and demonstration of an integrated plant assessment (IPA) process that would meet the requirements of the License Renewal Rule, published by the US Nuclear Regulatory Commission (NRC) in December 1991. The BWOG consists of five utilities with plants of very similar design, operation, and age. The owners, along with technical support from B & W Nuclear Technologies, created a highly capable and effective team to address the elements of the license renewal rule. This paper presents the BWOG strategy from the beginning of the program, the accomplishments to date, and the current role of the BWOG GLRP.

Gill, R.L. Jr.

1994-12-31T23:59:59.000Z

143

Cognitive Single Carrier Systems: Joint Impact of Multiple Licensed Transceivers  

E-Print Network [OSTI]

Cognitive Single Carrier Systems: Joint Impact of Multiple Licensed Transceivers Kyeong Jin Kim of interference from multiple licensed transceivers on cognitive underlay single carrier systems is examined, and 3) interference power from the primary transmitters. For this cognitive underlay single carrier

Elkashlan, Maged

144

Technology Available for Licensing Office of Technology Management  

E-Print Network [OSTI]

Technology Available for Licensing Office of Technology Management The Pennsylvania State University 113 Technology Center, University Park, PA 16802 814.865.6277 phone; 814.865.3591 fax Contact: Matthew D. Smith Sr. Technology Licensing Officer The Pennsylvania State University Phone: (814) 863

Lee, Dongwon

145

IT Operational Oversight Committee Round #4: Software Licensing Strategies Team  

E-Print Network [OSTI]

, University Development Office Cliff Johnston* , Professor of Soil Chemistry, College of Agriculture Julie license purchasing and management. The team evaluated software purchasing and licensing information from a variety of sources that included data from central purchasing (i.e., SRM), credit card purchases (not

146

Patent License for OpenSSL 1. Definitions  

E-Print Network [OSTI]

Patent License for OpenSSL 1. Definitions 1.1 "Licensor" means Phillip Rogaway. orOne Shields Avenue, Davis, CA 95616-8562. 1.2 "Licensed Patents" means any patent that claims priority to United States Patent Application No. 09/918,615 entitled "Method and Apparatus for Facilitating Efficient

Rogaway, Phillip

147

Adhesive bonding using variable frequency microwave energy  

DOE Patents [OSTI]

Methods of facilitating the adhesive bonding of various components with variable frequency microwave energy are disclosed. The time required to cure a polymeric adhesive is decreased by placing components to be bonded via the adhesive in a microwave heating apparatus having a multimode cavity and irradiated with microwaves of varying frequencies. Methods of uniformly heating various articles having conductive fibers disposed therein are provided. Microwave energy may be selectively oriented to enter an edge portion of an article having conductive fibers therein. An edge portion of an article having conductive fibers therein may be selectively shielded from microwave energy.

Lauf, Robert J. (Oak Ridge, TN); McMillan, April D. (Knoxville, TN); Paulauskas, Felix L. (Oak Ridge, TN); Fathi, Zakaryae (Cary, NC); Wei, Jianghua (Raleigh, NC)

1998-01-01T23:59:59.000Z

148

Adhesive bonding using variable frequency microwave energy  

DOE Patents [OSTI]

Methods of facilitating the adhesive bonding of various components with variable frequency microwave energy are disclosed. The time required to cure a polymeric adhesive is decreased by placing components to be bonded via the adhesive in a microwave heating apparatus having a multimode cavity and irradiated with microwaves of varying frequencies. Methods of uniformly heating various articles having conductive fibers disposed therein are provided. Microwave energy may be selectively oriented to enter an edge portion of an article having conductive fibers therein. An edge portion of an article having conductive fibers therein may be selectively shielded from microwave energy. 26 figs.

Lauf, R.J.; McMillan, A.D.; Paulauskas, F.L.; Fathi, Z.; Wei, J.

1998-09-08T23:59:59.000Z

149

Adhesive bonding using variable frequency microwave energy  

DOE Patents [OSTI]

Methods of facilitating the adhesive bonding of various components with variable frequency microwave energy are disclosed. The time required to cure a polymeric adhesive is decreased by placing components to be bonded via the adhesive in a microwave heating apparatus having a multimode cavity and irradiated with microwaves of varying frequencies. Methods of uniformly heating various articles having conductive fibers disposed therein are provided. Microwave energy may be selectively oriented to enter an edge portion of an article having conductive fibers therein. An edge portion of an article having conductive fibers therein may be selectively shielded from microwave energy. 26 figs.

Lauf, R.J.; McMillan, A.D.; Paulauskas, F.L.; Fathi, Z.; Wei, J.

1998-08-25T23:59:59.000Z

150

Scanning tip microwave near field microscope  

DOE Patents [OSTI]

A microwave near field microscope has a novel microwave probe structure wherein the probing field of evanescent radiation is emitted from a sharpened metal tip instead of an aperture or gap. This sharpened tip, which is electrically and mechanically connected to a central electrode, extends through and beyond an aperture in an endwall of a microwave resonating device such as a microwave cavity resonator or a microwave stripline resonator. Since the field intensity at the tip increases as the tip sharpens, the total energy which is radiated from the tip and absorbed by the sample increases as the tip sharpens. The result is improved spatial resolution without sacrificing sensitivity.

Xiang, Xiao-Dong (Alameda, CA); Schultz, Peter G. (Oakland, CA); Wei, Tao (Albany, CA)

1998-01-01T23:59:59.000Z

151

WIRELESS FOR A NUCLEAR FACILITY  

SciTech Connect (OSTI)

The introduction of wireless technology into a government site where nuclear material is processed and stored brings new meaning to the term ''harsh environment''. At SRNL, we are attempting to address not only the harsh RF and harsh physical environment common to industrial facilities, but also the ''harsh'' regulatory environment necessitated by the nature of the business at our site. We will discuss our concepts, processes, and expected outcomes in our attempts to surmount the roadblocks and reap the benefits of wireless in our ''factory''.

Shull, D; Joe Cordaro, J

2007-03-28T23:59:59.000Z

152

MATLAB muliplatform research license: Numeric computation, advanced graphics and visualization, and a high-level programming  

E-Print Network [OSTI]

MATLAB muliplatform research license: Numeric computation, advanced graphics and visualization license allows research and includes the following: Feature # of users MATLAB 7 Simulink 6 Control System

Dawson, Jeff W.

153

Exclusive License: AGMT-XXXX U.S. DEPARTMENT OF ENERGY NATIONAL...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for the computation of any royalty fees payable under this License, and shall render to LICENSOR annually, within thirty days of the anniversary date of this License, an...

154

Non-Power Reactor Operator Licensing Examiner Standards. Revision 1  

SciTech Connect (OSTI)

The Non-Power Reactor Operator Licensing Examiner Standards provide policy and guidance to NRC examiners and establish the procedures and practices for examining and licensing of applicants for NRC operator licenses pursuant to Part 55 of Title 10 of the Code of Federal Regulations (10 CFR 55). They are intended to assist NRC examiners and facility licensees to understand the examination process better and to provide for equitable and consistent administration of examinations to all applicants by NRC examiners. These standards are not a substitute for the operator licensing regulations and are subject to revision or other internal operator examination licensing policy changes. As appropriate, these standards will be revised periodically to accommodate comments and reflect new information or experience.

NONE

1995-06-01T23:59:59.000Z

155

Microwave sintering of boron carbide  

DOE Patents [OSTI]

A method for forming boron carbide into a particular shape and densifying the green boron carbide shape. Boron carbide in powder form is pressed into a green shape and then sintered, using a microwave oven, to obtain a dense boron carbide body. Densities of greater than 95% of theoretical density have been obtained. 1 tab.

Blake, R.D.; Katz, J.D.; Petrovic, J.J.; Sheinberg, H.

1988-06-10T23:59:59.000Z

156

Controlled zone microwave plasma system  

DOE Patents [OSTI]

An apparatus and method for initiating a process gas plasma. A conductive plate having a plurality of conductive fingers is positioned in a microwave applicator. An arc forms between the conductive fingers to initiate the formation of a plasma. A transport mechanism may convey process materials through the plasma. A spray port may be provided to expel processed materials.

Ripley, Edward B. (Knoxville, TN); Seals, Roland D. (Oak Ridge, TN); Morrell, Jonathan S. (Knoxville, TN)

2009-10-20T23:59:59.000Z

157

6, 54275456, 2006 Passive microwave  

E-Print Network [OSTI]

ACPD 6, 5427­5456, 2006 Passive microwave 3-D polarization effects from rainy clouds A. Battaglia radiometers A. Battaglia 1 , C. Simmer 1 , and H. Czekala 2 1 Meteorological Institute, University of Bonn April 2006 ­ Published: 27 June 2006 Correspondence to: A. Battaglia (batta@uni-bonn.de) 5427 #12;ACPD 6

Boyer, Edmond

158

Document: P1289 Category: Computing Technologies License Status: Available for licensing Texas Industry Cluster: Information and Computer Technology  

E-Print Network [OSTI]

controls · Interactive systems, such as bio-electrical prosthetics interfaces and real-time translationalInventors Document: P1289 Category: Computing Technologies License Status: Available for licensing By rethinking the design of an analog integrator, the system allows for processing of analog signals without

Lightsey, Glenn

159

Physical layer-aware wireless link layer protocols  

E-Print Network [OSTI]

With wireless devices becoming ubiquitous, the problem of designing high performance and reliable wireless networks is of great importance today. Wireless links are characterized by a rapidly varying channel, requiring ...

Vutukuru, Mythili

2010-01-01T23:59:59.000Z

160

Green Radio Communications in a Heterogeneous Wireless Medium  

E-Print Network [OSTI]

1 Green Radio Communications in a Heterogeneous Wireless Medium Muhammad Ismail and Weihua Zhuang wireless communication networks. Such energy efficient solutions are referred to as green communication efficient wireless communication networks, due to environmental, financial, and quality

Zhuang, Weihua

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Wireless@Virginia Tech Telecommunications  

E-Print Network [OSTI]

Wireless@Virginia Tech SWIM VLSI for Telecommunications The Institute for Critical Technology Whittemore Hall Bradley Department of Electrical and Computer Engineering Virginia Tech Blacksburg, VA 24061 units Power-line communications for vehicles, ships and airplanes Power conditioning circuits for energy

Beex, A. A. "Louis"

162

Energy efficiency in wireless networks  

E-Print Network [OSTI]

technique is to use power saving mode, which allows a node to power off its wireless network interface (or enter a doze state) to reduce energy consumption. The other is to use a technique that suitably varies transmission power to reduce energy consumption...

Jung, Eun-Sun

2005-11-01T23:59:59.000Z

163

SAFSTOR and License Renewal: Making Them Coexist  

SciTech Connect (OSTI)

The Indian Point Energy Center is located on the eastern shore of the Hudson River in the town of Buchanan, New York. It lies approximately thirty miles north of New York City, and thus, holds the distinction of being the closest nuclear facility to a major metropolitan area. Units 1 and 2 were constructed and operated by Consolidated Edison and Unit 3 was owned and operated by the New York State Power Authority. All three units are now owned and operated by Entergy Nuclear- Northeast. Indian Point Unit 1 was powered by a pressurized water reactor which operated with an authorized maximum steady state power level of 615 thermal megawatts until October 31, 1974. On June 19, 1980, the Commission issued an order revoking authority to operate the facility. Although 244 spent fuel assemblies were successfully shipped offsite to a spent fuel reprocessing facility, 160 assemblies remain in the Unit 1 spent fuel pool awaiting relocation to dry cask storage. Units 2 and 3 are also pressurized water reactors which each produce slightly in excess of 1,000 MWe. Since 1974, Unit 1 has been maintained in a Safe Store Mode (SAFSTOR). For the purposes of this document, the term 'SAFSTOR' is intended to mean 'Custodial SAFSTOR' as described in section 2.4.3 of NUREG 0586 (Final Generic Environmental Impact Statement on Decommissioning of Nuclear Facilities (GEIS) as follows: 'Custodial SAFSTOR requires a minimum cleanup and decontamination effort initially, followed by a period of continuing care with the active protection systems (principally the ventilation system) kept in service throughout the storage period. Full-time onsite surveillance by operating and security forces is required to carry out radiation monitoring, to maintain the equipment, and to prevent accidental or deliberate intrusion into the facility and the subsequent exposure to radiation or the disposal of radioactivity beyond the confines of the facility'. The decision to enter SAFSTOR was based upon the immediate proximity of Unit 1 to the operating units and the fact that a number of Unit 1 systems are shared with Unit 2. Over the past few decades, additional Unit 1 space (primarily within the turbine building) has been cleaned out and is being used to support the operating Units. The original plan to maintain Unit 1 in a SAFSTOR condition until it could be safely dismantled along with Unit 2 at the end of the Unit 2 operating license in 2012, requires some level of re-thinking now that Units 2 and 3 are applying for renewal of their licenses with the desire to continue operation until the 2033 time frame. The remainder of this paper summarizes the inspections and assessments undertaken by Entergy to investigate and document the condition of Indian Point Unit 1 and the resulting steps taken to assure that it would not pose a threat to the license extension efforts being under taken by Units 2 and 3. In conclusion: the Entergy Indian Point management team has systematically undertaken an effort to ensure the Unit 1 SAFSTOR condition and has implemented programs and procedural controls which will assure that it will continue to be safely maintained and will not impact the continued safe operation of Units 2 and 3 during their license renewal period.

Henries, William PE [TLG Services, Inc. - An Entergy Company, 148 New Milford Road East, Bridgewater, CT06752 (United States)

2008-01-15T23:59:59.000Z

164

Prototype system brings advantages of wireless technology to...  

National Nuclear Security Administration (NNSA)

Advantages of wireless, compared to a wired system, include lower cost, greater reliability and freedom of movement. Read more. Prototype system brings advantages of wireless...

165

Electromagnetic Interference in Wireless Communications: Behavioral-Level Simulation  

E-Print Network [OSTI]

Electromagnetic Interference in Wireless Communications: Behavioral-Level Simulation Approach in electromagnetic interference (EMI) modeling and simulation for modern and future wireless communication systems

Loyka, Sergey

166

ISA Approves Standard for Wireless Automation in Process Control...  

Energy Savers [EERE]

approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. ISA...

167

SoftCast: One Video to Serve All Wireless Receivers  

E-Print Network [OSTI]

The main challenge in wireless video multicast is to scalably serve multiple receivers who have different channel characteristics. Current wireless transmission schemes, however, cannot support smooth degradation. Specifically, ...

Katabi, Dina

2009-02-07T23:59:59.000Z

168

Vehicle Technologies Office Merit Review 2014: Wireless Charging...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Wireless Charging Vehicle Technologies Office Merit Review 2014: Wireless Charging Presentation given by Oak Ridge National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program...

169

EM's Laboratory Supports Testing Wireless Technology in Secure...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

wireless transmitter, alarms and a backup power source. SRNL contracted with General Dynamics to develop components for the ultra-secure short range wireless network. During the...

170

Wireless technology collects real-time information from oil and...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Wireless technology collects real-time information from oil and gas wells Wireless technology collects real-time information from oil and gas wells The patented system delivers...

171

CCEC Seminar Wireless Sensors for SemiconductorWireless Sensors for Semiconductor  

E-Print Network [OSTI]

CCEC Seminar Wireless Sensors for SemiconductorWireless Sensors for Semiconductor Manufacturing perhaps. In this talk, we describe our efforts in developing a new class of wireless sensors for use in semiconductor manufacturing. These sensors are fully self-contained with on board power, communications

Akhmedov, Azer

172

Power Sources for Wireless Sensor Abstract. Wireless sensor networks are poised to become a very significant  

E-Print Network [OSTI]

Power Sources for Wireless Sensor Networks Abstract. Wireless sensor networks are poised to become a very significant enabling technology in many sectors. Already a few very low power wireless sensor environment, alternative power sources must be employed. This paper reviews many potential power sources

Frechette, Luc G.

173

52 IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS, VOL. 21, NO. 1, JANUARY 2011 Instantaneous Microwave Frequency Measurement  

E-Print Network [OSTI]

photonics. I. INTRODUCTION F OR modern radar and other electronic warfare (EW) ap- plications a large bandwidth [1]. As the conventional electronic tech- niques are thought to be slow, limited@site.uottawa.ca). H. Chi and X. Zhang are with the Department of Information Science and Electronic Engineering

Yao, Jianping

174

Microwave assisted hard rock cutting  

DOE Patents [OSTI]

An apparatus for the sequential fracturing and cutting of subsurface volume of hard rock (102) in the strata (101) of a mining environment (100) by subjecting the volume of rock to a beam (25) of microwave energy to fracture the subsurface volume of rock by differential expansion; and , then bringing the cutting edge (52) of a piece of conventional mining machinery (50) into contact with the fractured rock (102).

Lindroth, David P. (Apple Valley, MN); Morrell, Roger J. (Bloomington, MN); Blair, James R. (Inver Grove Heights, MN)

1991-01-01T23:59:59.000Z

175

Note: Cryogenic coaxial microwave filters  

SciTech Connect (OSTI)

The careful filtering of microwave electromagnetic radiation is critical for controlling the electromagnetic environment for experiments in solid-state quantum information processing and quantum metrology at millikelvin temperatures. We describe the design and fabrication of a coaxial filter assembly and demonstrate that its performance is in excellent agreement with theoretical modelling. We further perform an indicative test of the operation of the filters by making current-voltage measurements of small, underdamped Josephson junctions at 15 mK.

Tancredi, G.; Meeson, P. J. [Department of Physics, Royal Holloway, University of London, Egham TW20 0EX (United Kingdom)] [Department of Physics, Royal Holloway, University of London, Egham TW20 0EX (United Kingdom); Schmidlin, S. [Department of Physics, Royal Holloway, University of London, Egham TW20 0EX (United Kingdom) [Department of Physics, Royal Holloway, University of London, Egham TW20 0EX (United Kingdom); National Physical Laboratory, Hampton Road, Teddington TW11 0LW (United Kingdom)

2014-02-15T23:59:59.000Z

176

Wireless System Considerations When Implementing NERC Critical...  

Broader source: Energy.gov (indexed) [DOE]

American Electric Reliability Corporation (NERC) Critical Infrastructure Protection (CIP) Standards (CIP-002 through CIP-009). The increased use of wireless technologies and...

177

Wireless Demand Response Controls for HVAC Systems  

E-Print Network [OSTI]

Response Controls for HVAC Systems Clifford Federspiel,tests. Figure 5: Specific HVAC electric power consumptioncontrol, demand response, HVAC, wireless Executive Summary

Federspiel, Clifford

2010-01-01T23:59:59.000Z

178

Resource management in heterogeneous wireless sensor networks  

E-Print Network [OSTI]

A. , 2002: Joint scheduling and power control for wirelesstransmit power control while scheduling wireless nodes ina control packet which contains the scheduling information

Regini, Edoardo

2009-01-01T23:59:59.000Z

179

Process for microwave sintering boron carbide  

DOE Patents [OSTI]

A method of microwave sintering boron carbide comprises leaching boron carbide powder with an aqueous solution of nitric acid to form a leached boron carbide powder. The leached boron carbide powder is coated with a glassy carbon precursor to form a coated boron carbide powder. The coated boron carbide powder is consolidated in an enclosure of boron nitride particles coated with a layer of glassy carbon within a container for microwave heating to form an enclosed coated boron carbide powder. The enclosed coated boron carbide powder is sintered within the container for microwave heating with microwave energy.

Holcombe, C.E.; Morrow, M.S.

1993-10-12T23:59:59.000Z

180

Process for microwave sintering boron carbide  

DOE Patents [OSTI]

A method of microwave sintering boron carbide comprises leaching boron carbide powder with an aqueous solution of nitric acid to form a leached boron carbide powder. The leached boron carbide powder is coated with a glassy carbon precursor to form a coated boron carbide powder. The coated boron carbide powder is consolidated in an enclosure of boron nitride particles coated with a layer of glassy carbon within a container for microwave heating to form an enclosed coated boron carbide powder. The enclosed coated boron carbide powder is sintered within the container for microwave heating with microwave energy.

Holcombe, Cressie E. (440 Sugarwood Dr., Knoxville, TN 37922); Morrow, Marvin S. (Rte. #3, Box 113, Kingston, TN 37763)

1993-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Technology available for license: Charging of liquid energy storage...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technology available for license: Charging of liquid energy storage media through radiolysis (ANL-IN-14-036) January 23, 2015 Tweet EmailPrint This technology utilizes radiolysis...

182

Scheduling Heterogeneous Wireless Systems for Efficient Spectrum Access  

E-Print Network [OSTI]

Radio approach for usage of the Virtual Unlicensed Spectrum (CORVUS) system exploits unoccupied licensed

Bao, Lichun; Liao, Shenghui

2010-01-01T23:59:59.000Z

183

E-Print Network 3.0 - adapting wireless technology Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

possible. A wireless sensor network normally comes a large area... in wireless sensor networks The rapid progress of wireless communication and embedded micro-sensing MEMS... ....

184

A Study of Energy-efficient Routing Supporting Coordinated Sleep Scheduling in Wireless Ad Hoc Networks.  

E-Print Network [OSTI]

??A wireless ad hoc network is a collection of wireless computing devices that self-configure to form a network independently of any fixed infrastructure. Many wireless… (more)

Lou, Chong

2015-01-01T23:59:59.000Z

185

INTERNAL HAZARDS ANALYSIS FOR LICENSE APPLICATION  

SciTech Connect (OSTI)

The purpose of this internal hazards analysis is to identify and document the internal hazards and potential initiating events associated with preclosure operations of the repository at Yucca Mountain. Internal hazards are those hazards presented by the operation of the facility and by its associated processes that can potentially lead to a radioactive release or cause a radiological hazard. In contrast to external hazards, internal hazards do not involve natural phenomena and external man-made hazards. This internal hazards analysis was performed in support of the preclosure safety analysis and the License Application for the Yucca Mountain Project. The methodology for this analysis provides a systematic means to identify internal hazards and potential initiating events that may result in a radiological hazard or radiological release during the repository preclosure period. These hazards are documented in tables of potential internal hazards and potential initiating events (Section 6.6) for input to the repository event sequence categorization process. The results of this analysis will undergo further screening and analysis based on the criteria that apply to the performance of event sequence analyses for the repository preclosure period. The evolving design of the repository will be re-evaluated periodically to ensure that internal hazards that have not been previously evaluated are identified.

R.J. Garrett

2005-02-17T23:59:59.000Z

186

Document: P1312 Category: Nanotechnology, Physical Science Applications License Status: Available for licensing Texas Industry Cluster: Energy  

E-Print Network [OSTI]

: Available for licensing Texas Industry Cluster: Energy Scalable methods of producing three-dimensional nanocomposites for energy, semiconductor, and advanced manufacturing applications Problem Currently, the production of nanoparticles and nanostructured films is difficult, because nanoparticles are hard to produce

Lightsey, Glenn

187

Wireless Network Capacity Management: A Real Options Approach  

E-Print Network [OSTI]

capacity, market price of risk, investment timing option 1 Introduction Wireless networks are now regarded

Forsyth, Peter A.

188

Wireless Sensor Networks for Structural Health Monitoring by Sukun Kim  

E-Print Network [OSTI]

Wireless Sensor Networks (WSN). The project is targeting a deployment on the Golden Gate Bridge. Ambient

California at Berkeley, University of

189

Student MAC Wireless Setup Guide Page 1 of 3  

E-Print Network [OSTI]

authentication occurs for an account with Administrator rights. Step 5. The student-curtin wireless network to the Curtin Wireless network: Wireless network names There are two wireless networks operating at Curtin University. One is available for staff and the other for students. When you configure your network connection

190

Staff MAC Wireless Setup Guide Page 1 of 3  

E-Print Network [OSTI]

for an account with Administrator rights. Step 5. The staff-curtin wireless network is now connected as indicated to the Curtin Wireless network: Wireless network names There are two wireless networks operating at Curtin University. One is available for staff and the other for students. When you configure your network connection

191

Wireless Industrial Monitoring and Control using a Smart Sensor Platform  

E-Print Network [OSTI]

. Prabhu and Rajit Gadh Wireless Internet for the Mobile Enterprise Consortium University of California

California at Los Angeles, University of

192

WIRELESS SENSORS EMBEDDED IN CONCRETE Amal Abbadi  

E-Print Network [OSTI]

WIRELESS SENSORS EMBEDDED IN CONCRETE Amal Abbadi 1 Phd Student, IRCICA, IEMN, Université Lille1 antennas with concrete are investigated at 860MHz. Simulations for different cases (different concrete are presented. KEYWORDS : Wireless sensor networks, concrete attenuation, embedded antenna, concrete

Paris-Sud XI, Université de

193

TESLA'S VISION OF THE WIRELESS GLOBAL COMMUNICATIONS  

E-Print Network [OSTI]

TESLA'S VISION OF THE WIRELESS GLOBAL COMMUNICATIONS Ljiljana Trajkovi Communication Networks;January 17, 2005 UBC Ljiljana Trajkovic, Simon Fraser University 2 Road map Tesla in 1890's First wireless;January 17, 2005 UBC Ljiljana Trajkovic, Simon Fraser University 4 Alternate currents Tesla left Edison

Trajkovic, Ljiljana

194

Wireless Sensor Networks Lecture 1: Introduction  

E-Print Network [OSTI]

Ptr, Vanderbilt #12;2009 ­© Matt Welsh Harvard University 10 Solar panels for charging car battery (used by Free Harvard University 4 Wireless Technologies Comparison Data rate Complexity/power/cost CC1000 Bluetooth 802 University 5 Wireless Technologies Comparison Type Data rate Transmit pwr Range (approx) Cost 802.11b 11

Maróti, Miklós

195

Monitoring Energy Consumption In Wireless Sensor Networks  

E-Print Network [OSTI]

Monitoring Energy Consumption In Wireless Sensor Networks Matthias Witt, Christoph Weyer, it may impair the ability of the sensor network to function. Therefore, minimizing energy consumption energy consumption in both standby and active modes is the basis of wireless networks. Energy preserving

Turau, Volker

196

a Wireless Sensor Network for Environmental Monitoring  

E-Print Network [OSTI]

transmitters #12;Sample sensors: #12;Sample sensors: PAR: Photosynthetically Active (solar) Radiation sensora Wireless Sensor Network for Environmental Monitoring a Wireless Sensor Network for Environmental technology: a truly self configurable, low-cost, maintenance-free, ad-hoc sensor network (not based on Zig

Gburzynski, Pawel

197

SECURITY FOR WIRELESS NETWORKS AND DEVICES  

E-Print Network [OSTI]

connections. Users of handheld devices such as personal digital assis tants (PDAs) and cell phones can synMarch 2003 SECURITY FOR WIRELESS NETWORKS AND DEVICES Shirley Radack, Editor, Computer Security organizations and users have found that wireless communications and devices are convenient, flexible, and easy

198

Manual authentication for wireless devices Christian Gehrmann  

E-Print Network [OSTI]

is to examine how these services might best be achieved for personal wireless-enabled devices. Using the terminology of Stajano [12], the problem is that of securely `imprinting' a personal device. That is, suppose a user has two wireless-enabled devices, e.g. a mobile phone and a Personal Digital Assistant (PDA

Mitchell, Chris

199

Microwave-triggered laser switch  

DOE Patents [OSTI]

A high-repetition rate switch is described for delivering short duration, high-powered electrical pulses from a pulsed-charged dc power supply. The present invention utilizes a microwave-generating device such as a magnetron that is capable of producing high-power pulses at high-pulse repetition rates and fast-pulse risetimes for long periods with high reliability. The rail-gap electrodes provide a large surface area that reduces induction effects and minimizes electrode erosion. Additionally, breakdown is initiated in a continuous geometric fashion that also increases operating lifetime of the device.

Piltch, M.S.

1982-05-19T23:59:59.000Z

200

Microwave-triggered laser switch  

DOE Patents [OSTI]

A high-repetition rate switch for delivering short duration, high-power electrical pulses from a pulsed-charged dc power supply. The present invention utilizes a microwave-generating device such as a magnetron that is capable of producing high-power pulses at high-pulse repetition rates and fast-pulse risetimes for long periods with high reliability. The rail-gap electrodes provide a large surface area that reduces induction effects and minimizes electrode erosion. Additionally, breakdown is initiated in a continuous geometric fashion that also increases operating lifetime of the device.

Piltch, Martin S. (Los Alamos, NM)

1984-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Microwave-enhanced chemical processes  

DOE Patents [OSTI]

A process is disclosed for the disposal of toxic wastes including chlorinated hydrocarbons, comprising, establishing a bed of non-metallic particulates having a high dielectric loss factor. Intimate contact of the particulates and the toxic wastes at a temperature in excess of about 400 C in the presence of microwave radiation for a time sufficient breaks the hydrocarbon chlorine bonds. Detoxification values in excess of 80 are provided and further detoxification of the bed is followed by additional disposal of toxic wastes. 1 figure.

Varma, R.

1990-06-19T23:59:59.000Z

202

Microwave Meals in a Hurry.  

E-Print Network [OSTI]

of time to prepare complete meals. Select dishes that are family favorites and use tested recipes . Learning to adapt recipes for microwave cooking comes. later with experience. In general, advance meal planning is the key to getting the most out.... For example, whole carrots stay hot longer than sliced carrots. Cooking and then serving food in the same dish extends holding time. So does wrapping or cov ering the food in plastic wrap or foil, or covering it with a lid. Cook foods with a long holding...

Haggard, Marilyn A.

1981-01-01T23:59:59.000Z

203

Microwave drying of ferric oxide pellets  

SciTech Connect (OSTI)

The application of microwave energy for the drying of ferric oxide pellets has been investigated and evaluated. It is shown that the microwave drying rates are much higher than those observed in the conventional process. Also there is some potential for improved quality of the product. As a stand-alone technology it is unlikely that microwave drying would be economical for pellets due to the low cost of conventional fuels. However, based on an understanding of the drying mechanisms in the conventional process and in the microwave process, it is shown that microwave-assisted drying offers considerable potential. In this hybrid process, the advantages of the two drying techniques are combined to provide an improved drying process.

Pickles, C.A.; Xia, D.K. [Queens` Univ., Kingston, Ontario (Canada). Dept. of Materials and Metallurgical Engineering

1997-12-31T23:59:59.000Z

204

Electrodeless lamp energized by microwave energy  

SciTech Connect (OSTI)

This patent describes an electrodeless lamp. It comprises: a microwave cavity; a source of microwaves in communication with the cavity; a lamp envelope containing a plasma-forming medium mounted within the microwave cavity; a gas manifold for feeding gas to at least one gas passageway for directing a stream of gas to the outer surface of the envelope; a gas leak passageway leading from the gas manifold; a conductive mesh assembly for retaining microwaves within the cavity and permitting light to be emitted from the cavity. The assembly including gas flow blocking means for preventing the flow of gas through the gas leak passageway when the screen is in place in the lamp; and means for shutting off the source of microwaves when the gas pressure in the manifold drops below a predetermined value.

Ervin, R.M.; Perret, J.

1990-01-16T23:59:59.000Z

205

Microwave generated plasma light source apparatus  

SciTech Connect (OSTI)

A microwave generated plasma light source including a microwave generator, a microwave cavity having a light reflecting member forming at least a portion of the cavity, and a member transparent to light and opaque to microwaves disposed across an opening of the cavity opposite the feeding opening through which the microwave generator is coupled. An electrodeless discharge bulb is disposed at a position in the cavity such that the cavity operates as a resonant cavity at least when the bulb is emitting light. In the bulb is encapsulated at least one discharge light emissive substance. The bulb has a shape and is sufficiently small that the bulb acts substantially as a point light source.

Yoshizawa, K.; Ito, H.; Kodama, H.; Komura, H.; Minowa, Y.

1985-02-05T23:59:59.000Z

206

Tandem microwave waste remediation and decontamination system  

DOE Patents [OSTI]

The invention discloses a tandem microwave system consisting of a primary chamber in which microwave energy is used for the controlled combustion of materials. A second chamber is used to further treat the off-gases from the primary chamber by passage through a susceptor matrix subjected to additional microwave energy. The direct microwave radiation and elevated temperatures provide for significant reductions in the qualitative and quantitative emissions of the treated off gases. The tandem microwave system can be utilized for disinfecting wastes, sterilizing materials, and/or modifying the form of wastes to solidify organic or inorganic materials. The simple design allows on-site treatment of waste by small volume waste generators.

Wicks, George G. (North Aiken, SC); Clark, David E. (Gainesville, FL); Schulz, Rebecca L. (Gainesville, FL)

1999-01-01T23:59:59.000Z

207

Microwave processing for carbide ceramics  

SciTech Connect (OSTI)

The US Bureau of Mines (USBM) has developed a process for synthesizing carbide ceramics in a microwave-induced plasma (MIP). For example, the process forms tungsten carbide with only 0.04% free carbon impurity at an average particle size of 0.05 {mu}m. Starting materials are tungsten oxide, carbon, and carbon monoxide. Commercial methods to produce tungsten carbide require heating to 1,500 C for up to 7 hours. Using the USBM method, tungsten carbide can be produced in approximately 10 minutes using a 30 kW, 915 mHz microwave unit. The reaction is carried out in a short-circuited waveguide to create a standing wave. Reactants rest on a carbon pedestal inside a closed zirconia crucible filled with carbon monoxide. The crucible is place at a field maximum within the waveguide. The waveguide was filled with helium to protect the waveguide. A procedure for producing carbide on a larger scale is described. Other ceramic compounds have been produced using this method, including silicon carbide and titanium carbide.

Tolley, W.K.; Church, R.H. [Bureau of Mines, Salt Lake City, UT (United States). Salt Lake City Research Center

1995-08-01T23:59:59.000Z

208

Microwave sintering of nanocrystalline ceramics  

SciTech Connect (OSTI)

A single-mode cavity microwave furnace, operating in the TE{sub 103} mode at 2.45 GHz, has been set up at the Naval Research Laboratory (NRL) and is currently being used to investigate sintering of nanocrystalline ceramics. This presentation will discuss the apparatus used and the results obtained to date. The high purity Al{sub 2}O{sub 3} and TiO{sub 2} nanocrystalline powders were prepared by the sol-gel method. These powders were first uniaxially pressed to 14 MPa, CIP`ed to various pressures > 420 MPa and finally sectioned into wafers. The density of the green wafers was 30 to 38% TD. The wafers were heated in the microwave furnace for up to three hours at temperatures {<=} 1720{degrees}C. The temperature of the workpiece was monitored using an optical pyrometer. Final densities up to 80% TD have been obtained to date for Al{sub 2}O{sub 3} and up to 52% TD for TiO{sub 2}. Work is ongoing to characterize the sintered compacts, optimize the casketing for this furnace, and lay the groundwork for new studies using a 35 GHz gyrotron and quasioptical gyrotron tunable from 85 to 120 GHz.

Bruce, R.W. [United States Naval Academy, Annapolis, MD (United States); Rayne, R.; Chow, G.M. [Naval Research Lab., Washington, DC (United States)] [and others

1995-12-31T23:59:59.000Z

209

License Stewardship Approach to Commercial Nuclear Power Plant Decommissioning  

SciTech Connect (OSTI)

The paper explores both the conceptual approach to decommissioning commercial nuclear facilities using a license stewardship approach as well as the first commercial application of this approach. The license stewardship approach involves a decommissioning company taking control of a site and the 10 CFR 50 License in order to complete the work utilizing the established trust fund. In conclusion: The license stewardship approach is a novel way to approach the decommissioning of a retired nuclear power plant that offers several key advantages to all parties. For the owner and regulators, it provides assurance that the station will be decommissioned in a safe, timely manner. Ratepayers are assured that the work will be completed for the price they already have paid, with the decommissioning contractor assuming the financial risk of decommissioning. The contractor gains control of the assets and liabilities, the license, and the decommissioning fund. This enables the decommissioning contractor to control their work and eliminates redundant layers of management, while bringing more focus on achieving the desired end state - a restored site. (authors)

Daly, P.T.; Hlopak, W.J. [Commercial Services Group, EnergySolutions 1009 Commerce Park, Oak Ridge, TN (United States)

2008-07-01T23:59:59.000Z

210

EM threat analysis for wireless systems.  

SciTech Connect (OSTI)

Modern digital radio systems are complex and must be carefully designed, especially when expected to operate in harsh propagation environments. The ability to accurately predict the effects of propagation on wireless radio performance could lead to more efficient radio designs as well as the ability to perform vulnerability analyses before and after system deployment. In this report, the authors--experts in electromagnetic (EM) modeling and wireless communication theory--describe the construction of a simulation environment that is capable of quantifying the effects of wireless propagation on the performance of digital communication.

Burkholder, R. J. (Ohio State University Electroscience Laboratory); Mariano, Robert J.; Schniter, P. (Ohio State University Electroscience Laboratory); Gupta, I. J. (Ohio State University Electroscience Laboratory)

2006-06-01T23:59:59.000Z

211

Low density inorganic foams fabricated using microwaves  

SciTech Connect (OSTI)

The objective of our work was to determine if high temperature foams could be made using microwave heating; and if so, to investigate some of their properties. Several foams were made and their compressive strengths, tensile strengths and densities were determined. Foams were made of glass, metal-glass, glass-fiber, metal-glass-fiber, and fly ash. The microwave source used was a Litton model 1521 microwave oven which operated at 2.45 GHz and had an output of 700 watts.

Meek, T.T.; Blake, R.D.; Gregory, T.G.

1985-01-01T23:59:59.000Z

212

Radioisotope thermoelectric generator licensed hardware package and certification tests  

SciTech Connect (OSTI)

This paper presents the Licensed Hardware package and the Certification Test portions of the Radioisitope Themoelectric Generator Transportation System. This package has been designed to meet those portions of the {ital Code} {ital of} {ital Federal} {ital Regulations} (10 CFR 71) relating to ``Type B`` shipments of radioactive materials. The licensed hardware is now in the U. S. Department of Energy licensing process that certifies the packaging`s integrity under accident conditions. The detailed information for the anticipated license is presented in the safety analysis report for packaging, which is now in process and undergoing necessary reviews. As part of the licensing process, a full-size Certification Test Article unit, which has modifications slightly different than the Licensed Hardware or production shipping units, is used for testing. Dimensional checks of the Certification Test Article were made at the manufacturing facility. Leak testing and drop testing were done at the 300 Area of the U.S. Department of Energy`s Hanford Site near Richland, Washington. The hardware includes independent double containments to prevent the environmental spread of {sup 238}Pu, impact limiting devices to protect portions of the package from impacts, and thermal insulation to protect the seal areas from excess heat during accident conditions. The package also features electronic feed-throughs to monitor the Radioisotope Thermoelectric Generator`s temperature inside the containment during the shipment cycle. This package is designed to safely dissipate the typical 4,500 thermal watts produced in the largest Radioisotope Thermoelectric Generators. The package also contains provisions to ensure leak tightness when radioactive materials, such as a Radioisotope Thermoelectric Generator for the Cassini Mission, planned for 1997 by the National Aeronautics and Space Administration, are being prepared for shipment. (Abstract Truncated)

Goldmann, L.H.; Averette, H.S. [Westinghouse Hanford Company, P.O. Box 1970, M/S R3-86 or N1-32, Richland, Washington 99352 (United States)

1995-01-20T23:59:59.000Z

213

Chiral-field microwave antennas (Chiral microwave near fields for far-field radiation)  

E-Print Network [OSTI]

In a single-element structure we obtain a radiation pattern with a squint due to chiral microwave near fields originated from a magnetostatic-mode ferrite disk. At the magnetostatic resonances, one has strong subwavelength localization of energy of microwave radiation. Magnetostatic oscillations in a thin ferrite disk are characterized by unique topological properties: the Poynting-vector vortices and the field helicity. The chiral-topology near fields allow obtaining unique phase structure distribution for far-field microwave radiation.

Kamenetskii, E O; Shavit, R

2015-01-01T23:59:59.000Z

214

Gauging the cosmic microwave background  

E-Print Network [OSTI]

We provide a new derivation of the anisotropies of the cosmic microwave background (CMB), and find an exact expression that can be readily expanded perturbatively. Close attention is paid to gauge issues, with the motivation to examine the effect of super-Hubble modes on the CMB. We calculate a transfer function that encodes the behaviour of the dipole, and examine its long-wavelength behaviour. We show that contributions to the dipole from adiabatic super-Hubble modes are strongly suppressed, even in the presence of a cosmological constant, contrary to claims in the literature. We also introduce a naturally defined CMB monopole, which exhibits closely analogous long-wavelength behaviour. We discuss the geometrical origin of this super-Hubble suppression, pointing out that it is a simple reflection of adiabaticity, and hence argue that it will occur regardless of the matter content.

J. P. Zibin; Douglas Scott

2008-12-21T23:59:59.000Z

215

Planar slot coupled microwave hybrid  

DOE Patents [OSTI]

A symmetrical 180.degree. microwave hybrid is constructed by opening a slot line in a ground plane below a conducting strip disposed on a dielectric substrate, creating a slot coupled conductor. Difference signals propagating on the slot coupled conductor are isolated on the slot line leaving sum signals to propagate on the microstrip. The difference signal is coupled from the slot line onto a second microstrip line for transmission to a desired location. The microstrip branches in a symmetrical fashion to provide the input/output ports of the 180.degree. hybrid. The symmetry of the device provides for balance and isolation between sum and difference signals, and provides an advantageous balance between the power handling capabilities and the bandwidth of the device.

Petter, Jeffrey K. (Williston, VT)

1991-01-01T23:59:59.000Z

216

E-Print Network 3.0 - assessment south microwave Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Process Christopher Marion Supervisor: Prof Kristian Waters Summary: microwaves) Optimization of the microwave pre-treatment process Assess the effect of the microwave pre......

217

Licensed reactor nuclear safety criteria applicable to DOE reactors  

SciTech Connect (OSTI)

This document is a compilation and source list of nuclear safety criteria that the Nuclear Regulatory Commission (NRC) applies to licensed reactors; it can be used by DOE and DOE contractors to identify NRC criteria to be evaluated for application to the DOE reactors under their cognizance. The criteria listed are those that are applied to the areas of nuclear safety addressed in the safety analysis report of a licensed reactor. They are derived from federal regulations, USNRC regulatory guides, Standard Review Plan (SRP) branch technical positions and appendices, and industry codes and standards.

Not Available

1993-11-01T23:59:59.000Z

218

The use for frequency-consequence curves in future reactor licensing  

E-Print Network [OSTI]

The licensing of nuclear power plants has focused until now on Light Water Reactors and has not incorporated systematically insights and benefits from Probabilistic Risk Assessment (PRA). With the goal of making the licensing ...

Debesse, Laurène

2007-01-01T23:59:59.000Z

219

Airborne wireless communication systems, airborne communication methods, and communication methods  

DOE Patents [OSTI]

An airborne wireless communication system includes circuitry configured to access information describing a configuration of a terrestrial wireless communication base station that has become disabled. The terrestrial base station is configured to implement wireless communication between wireless devices located within a geographical area and a network when the terrestrial base station is not disabled. The circuitry is further configured, based on the information, to configure the airborne station to have the configuration of the terrestrial base station. An airborne communication method includes answering a 911 call from a terrestrial cellular wireless phone using an airborne wireless communication system.

Deaton, Juan D. (Menan, ID); Schmitt, Michael J. (Idaho Falls, ID); Jones, Warren F. (Idaho Falls, ID)

2011-12-13T23:59:59.000Z

220

Modulated microwave microscopy and probes used therewith  

DOE Patents [OSTI]

A microwave microscope including a probe tip electrode vertically positionable over a sample and projecting downwardly from the end of a cantilever. A transmission line connecting the tip electrode to the electronic control system extends along the cantilever and is separated from a ground plane at the bottom of the cantilever by a dielectric layer. The probe tip may be vertically tapped near or at the sample surface at a low frequency and the microwave signal reflected from the tip/sample interaction is demodulated at the low frequency. Alternatively, a low-frequency electrical signal is also a non-linear electrical element associated with the probe tip to non-linearly interact with the applied microwave signal and the reflected non-linear microwave signal is detected at the low frequency. The non-linear element may be semiconductor junction formed near the apex of the probe tip or be an FET formed at the base of a semiconducting tip.

Lai, Keji; Kelly, Michael; Shen, Zhi-Xun

2012-09-11T23:59:59.000Z

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Continuous, real time microwave plasma element sensor  

DOE Patents [OSTI]

Microwave-induced plasma is described for continuous, real time trace element monitoring under harsh and variable conditions. The sensor includes a source of high power microwave energy and a shorted waveguide made of a microwave conductive, refractory material communicating with the source of the microwave energy to generate a plasma. The high power waveguide is constructed to be robust in a hot, hostile environment. It includes an aperture for the passage of gases to be analyzed and a spectrometer is connected to receive light from the plasma. Provision is made for real time in situ calibration. The spectrometer disperses the light, which is then analyzed by a computer. The sensor is capable of making continuous, real time quantitative measurements of desired elements, such as the heavy metals lead and mercury. 3 figs.

Woskov, P.P.; Smatlak, D.L.; Cohn, D.R.; Wittle, J.K.; Titus, C.H.; Surma, J.E.

1995-12-26T23:59:59.000Z

222

Cleanup of Nuclear Licensed Facility 57  

SciTech Connect (OSTI)

This summary describes the operations to clean up the equipment of the Nuclear Licensed Facility 57 (NLF 57). Due to the diversity of the research and development work carried out on the reprocessing of spent fuel in it, this installation is emblematic of many of the technical and organizational issues liable to be encountered in the final closure of nuclear facilities. The French atomic energy commission's center at Fontenay aux Roses (CEA-FAR) was created in 1946 to house pile ZOE. Laboratories for fuel cycle research were installed in existing buildings at the site. Work was later concentrated on spent fuel reprocessing, in a pilot workshop referred to as the 'Usine Pu'. In the early sixties, after the dismantling of these first generation facilities, a radiochemistry laboratory dedicated to research and development work on reprocessing was constructed, designated Building 18. During the same decade, more buildings were added: Building 54, storehouses and offices, Building 91, a hall and laboratories for chemical engineering research on natural and depleted uranium. Together, these three building constitute NLF 57. Building 18 architecture featured four similar modules. Each module had three levels: a sub-level consisting of technical galleries and rooms for the liquid effluent tanks, a ground floor and roof space in which the ventilation was installed. Offices, change rooms, four laboratories and a hall were situated on the ground floor. The shielded lines were installed in the laboratories and the halls. Construction of the building took place between 1959 and 1962, and its commissioning began in 1961. The research and development programs performed in NLF 57 related to studies of the reprocessing of spent fuel, including dry methods and the Purex process, techniques for the treatment of waste (vitrification, alpha waste decontamination, etc.) as well as studies and production of transuranic elements for industry and research. In addition to this work, the necessary methods of analysis for monitoring it were also developed. The research and development program finally ended on 30 June 1995. The NLF 57 cleanup program was intended to reduce the nuclear and conventional hazards and minimize the quantities of HLW and MLW during the subsequent dismantling work. To facilitate the organization of the cleanup work, it was divided into categories by type: - treatment and removal of nuclear material, - removal of radioactive sources, - treatment and removal of aqueous liquid waste, - treatment and removal of organic effluents, - treatment and removal of solid waste, - pumping out of the PETRUS tank, - flushing and decontamination of the tanks, - cleanup of Buildings 18 and 91/54. To estimate the cost of the operations and to monitor the progress of the work, an indicator system was put in place based on work units representative of the operation. The values of the work units were periodically updated on the basis of experience feedback. The cleanup progress is now 92% complete (06/12/31): - treatment and removal of nuclear material: 100%, - removal of radioactive sources: 100%, - treatment and removal of aqueous liquid waste: 64%, - treatment and removal of organic effluents: 87%, - treatment and removal of solid waste: 99%, - pumping out of the PETRUS tank: 69%, - flushing and decontamination of tank: 75%, - section cleaning of Buildings 18 and 91/: 90%. The DRSN/SAFAR is the delegated Project Owner for cleanup and dismantling operations. It is also the prime contractor for the cleanup and dismantling operations. SAFAR itself is responsible for operations relating to the CEA activity and those with technical risks (Removal of nuclear materials, Removal of radioactive sources, Pumping out plutonium and transuranic contaminated solvent and Flushing and decontamination of tanks and pipes). All other operations are sub-contracted to specialist companies. The NLF57 cleanup program as executed is capable of attaining activity levels compatible with a future dismantling operation using known and mastered techniques and producing a

Jeanjacques, Michel; Bremond, Marie Pierre; Marchand, Carole; Poyau, Cecile; Viallefont, Cecile; Gautier, Laurent; Masure, Frederic [Commissariat a l'Energie Atomique, Direction de l'Energie Nucleaire, Direction deleguee des Activites Nucleaires de Saclay, Departement des Reacteurs et des Services Nucleaires, Service d'Assainissement de Fontenay Aux Roses: 18, route du Panorama, BP6, 92265 Fontenay aux Roses Cedex (France)

2008-01-15T23:59:59.000Z

223

Routing in heterogeneous wireless ad hoc networks  

E-Print Network [OSTI]

Wireless ad hoc networks are used in several applications ranging from infrastructure monitoring to providing Internet connectivity to remote locations. A common assumption about these networks is that the devices that ...

Cheekiralla, Sivaram M. S. L., 1980-

2008-01-01T23:59:59.000Z

224

Epidemic Propagation In Overlaid Wireless Networks  

SciTech Connect (OSTI)

Witb tbe emergence of computer worms tbat can spread over air interfaces, wireless ad boc and sensor networks can be vulnerable to node compromises even if the deployed network is not connected to the backbone. Depending on the physical topology of the wireless network, even a single infected node can compromise the whole network. In this work, epidemic (e.g., worm) propagation in a static wireless network is studied, where a number of inCected mobile nodes are injected over the existing network. It is shown that the epidemic spread threshold and size depend on the physical topology of the underlying static wireless network as well as the mobility model employed by the infected mobile nodes. More specifically, results show that in a Cully-connected static wirelessnctwork targeted attacks are more effective, wbereas Cor a random topology random attacks can be sufficient to compromise the whole network.

Yanmaz, Evsen [Los Alamos National Laboratory

2008-01-01T23:59:59.000Z

225

Transmission Power Management for Wireless Health Applications  

E-Print Network [OSTI]

channel and energy efficient topology design for wirelessChris Blondia Design of Energy Efficient Topologies forEnergy-Efficient Signal Processing in Wearable Embedded Systems: An Optimal Feature Selection Approach,” 2012 International Symposium on Low Power Electronics and Design,

Amini, Navid

2012-01-01T23:59:59.000Z

226

Iterative Collision Resolution in Wireless Networks  

E-Print Network [OSTI]

With the growing popularity of smart phones and tablets, development of multimedia applications is on the rise. Speedy transmission of this massive amount information is already pushing the limits of the capacity of wireless networks...

Stuckman, Katherine Christine

2013-03-29T23:59:59.000Z

227

Virtual infrastructure for wireless ad hoc networks  

E-Print Network [OSTI]

One of the most significant challenges introduced by ad hoc networks is coping with the unpredictable deployment, uncertain reliability, and erratic communication exhibited by emerging wireless networks and devices. The ...

Gilbert, Seth, 1976-

2007-01-01T23:59:59.000Z

228

Interference management in wireless cellular networks   

E-Print Network [OSTI]

In wireless networks, there is an ever-increasing demand for higher system throughputs, along with growing expectation for all users to be available to multimedia and Internet services. This is especially difficult to ...

Burchardt, Harald Peter

2013-07-01T23:59:59.000Z

229

Modeling and design of compact microwave components and systems for wireless communications and power transmission  

E-Print Network [OSTI]

-band. Measured insertion loss (IL) K-band loop is under 0.4dB. The K- and W-band antenna array measured broadside gains are 23.6dB at 24.125GHz and 25dB at 76.5GHz with return loss under 9.54dB from 24 to 24.4GHz and 12 dB from 75.1 to 77.3GHz, respectively. Also...

Zepeda, Paola

2004-09-30T23:59:59.000Z

230

Guidelines for preparing and reviewing applications for the licensing of non-power reactors: Standard review plan and acceptance criteria. NUREG - 1537, Part 2  

SciTech Connect (OSTI)

NUREG - 1537, Part 2 gives guidance on the conduct of licensing action reviews to NRC staff who review non-power reactor licensing applications. These licensing actions include construction permits and initial operating licenses, license renewals, amendments, conversions from highly enriched uranium to low-enriched uranium, decommissioning, and license termination.

NONE

1996-02-01T23:59:59.000Z

231

Quantum Illumination at the Microwave Wavelengths  

E-Print Network [OSTI]

Quantum illumination is a quantum-optical sensing technique in which an entangled source is exploited to improve the detection of a low-reflectivity object that is immersed in a bright thermal background. Here we describe and analyze a system for applying this technique at microwave frequencies, a more appropriate spectral region for target detection than the optical, due to the naturally-occurring bright thermal background in the microwave regime. We use an electro-optomechanical converter to entangle microwave signal and optical idler fields, with the former being sent to probe the target region and the latter being retained at the source. The microwave radiation collected from the target region is then phase conjugated and upconverted into an optical field that is combined with the retained idler in a joint-detection quantum measurement. The error probability of this microwave quantum-illumination system, or quantum radar, is shown to be superior to that of any classical microwave radar of equal transmitted energy.

Shabir Barzanjeh; Saikat Guha; Christian Weedbrook; David Vitali; Jeffrey H. Shapiro; Stefano Pirandola

2015-01-31T23:59:59.000Z

232

Choosing intellectual protection: imitation, patent strength and licensing  

E-Print Network [OSTI]

Choosing intellectual protection: imitation, patent strength and licensing David Encaoua and Yassine Lefouili March 22, 2006 (revised version) Abstract Patents are probabilistic rights. We set up a multi-stage model in which choosing between patent and trade secrecy is a¤ected by three parameters

Paris-Sud XI, Université de

233

New and Emerging Energy Efficient Wireless Protocols New and Emerging Energy Efficient Wireless  

E-Print Network [OSTI]

New and Emerging Energy Efficient Wireless Protocols 1 of 12 New and Emerging Energy Efficient energy efficient wireless protocols. The benefits of each protocol are given, and then the different ways of conserving energy are compared. Key Words- Energy efficient protocols, energy efficiency, energy aware, low

Jain, Raj

234

Low Frequency Wireless Communications Technology  

SciTech Connect (OSTI)

The purpose of this project was to demonstrate Nxegen's real-time wireless electricity monitoring and load management technologies in selected commercial, industrial, and municipal end user facilities. The purpose of which is to demonstrate the ability for Nxegen's technology to collect real-time electricity data to a central location (Nxegen's Network Operation Center "NOC"), aggregate customer load profiles into portfolios of profiles, and be able to dispatch load curtailment commands from the NOC to individual customer loads to demonstrate the ability to integrate demand resources into the overall electric utility system for the purpose of; (1) improving overall system reliability, (2) reducing wholesale electric generation prices (locational marginal prices "LMP"), and (3) reducing congestion costs in energy constrained areas (southwest Connecticut).

Bartone, Erik J; Carbone, John F

2004-01-27T23:59:59.000Z

235

Implementing a wireless base station for a sensor network  

E-Print Network [OSTI]

Using wireless sensor networks for monitoring infrastructure is a new trend in civil engineering. Compared with traditional ways to monitor infrastructure, wireless sensor networks are cheap, safe, and compact. However, ...

Song, Heewon, 1977-

2004-01-01T23:59:59.000Z

236

Direct Information Exchange in Wireless Networks: A Coding Perspective  

E-Print Network [OSTI]

the problem and reduce the stress on the wireless networks. One strategy to reduce the strain on the wireless networks is to utilize cooperative communication. The purpose of this thesis is to provide more efficient and reliable solutions for direct...

Ozgul, Damla

2011-10-21T23:59:59.000Z

237

Design & implementation of a wireless sensor prototyping kit  

E-Print Network [OSTI]

In recent years, wireless sensor networks (WSN) has become an active area of research among computer scientists. In this work, JONA, a prototyping kit for wireless sensors, will be described. The intention of this kit is ...

Hope, Jamison Roger

2005-01-01T23:59:59.000Z

238

ENERGY EFFICIENCY AND SECURITY FOR MULTIHOP WIRELESS NETWORKS  

E-Print Network [OSTI]

ENERGY EFFICIENCY AND SECURITY FOR MULTIHOP WIRELESS NETWORKS BY MATTHEW JEFFERSON MILLER B over wireless channels demands confidentiality and integrity. In the energy efficiency domain that marginal gains in battery energy density necessitate energy efficient protocols. In the security realm

Vaidya, Nitin

239

Enhancing spectrum utilization through cooperation and cognition in wireless systems  

E-Print Network [OSTI]

We have seen a proliferation of wireless technologies and devices in recent years. The resulting explosion of wireless demand has put immense pressure on available spectrum. Improving spectrum utilization is therefore ...

Rahul, Hariharan Shankar, 1975-

2013-01-01T23:59:59.000Z

240

THE FUTURE OF THE WIRELESS ART by Nikola Tesla  

E-Print Network [OSTI]

THE FUTURE OF THE WIRELESS ART by Nikola Tesla WIRELESS TELEGRAPHY & TELEPHONY By Walter W. Massie & Charles R. Underhill, 1908, pp. 67-71. Mr. Nikola Tesla, in a recent interview by the authors

Cetiner, Bedri A.

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Dynamic channel allocation in satellite and wireless networks  

E-Print Network [OSTI]

The objective of this thesis is to understand how to utilize wireless channels in a fair and efficient manner within a multi-users communication environment. We start by exploring the allocation of a single wireless downlink ...

Sun, Jun, 1975-

2007-01-01T23:59:59.000Z

242

On-Demand Based Wireless Resources Trading for Green Communications  

E-Print Network [OSTI]

The purpose of Green Communications is to reduce the energy consumption of the communication system as much as possible without compromising the quality of service (QoS) for users. An effective approach for Green Wireless Communications is On-Demand strategy, which scales power consumption with the volume and location of user demand. Applying the On-Demand Communications model, we propose a novel scheme -- Wireless Resource Trading, which characterizes the trading relationship among different wireless resources for a given number of performance metrics. According to wireless resource trading relationship, different wireless resources can be consumed for the same set of performance metrics. Therefore, to minimize the energy consumption for given performance metrics, we can trade the other type of wireless resources for the energy resource under the demanded performance metrics. Based on the wireless resource trading relationship, we derive the optimal energy-bandwidth and energy-time wireless resource trading ...

Cheng, Wenchi; Zhang, Hailin; Wang, Qiang

2011-01-01T23:59:59.000Z

243

Radio frequency circuits for wireless receiver front-ends  

E-Print Network [OSTI]

The beginning of the 21st century sees great development and demands on wireless communication technologies. Wireless technologies, either based on a cable replacement or on a networked environment, penetrate our daily life more rapidly than ever...

Xin, Chunyu

2005-11-01T23:59:59.000Z

244

X-by-wireless: a novel approach to vehicle control  

E-Print Network [OSTI]

As the cost of wireless devices approaches zero, it becomes more feasible to replace wires with wireless communication. Vehicle wiring harnesses are traditionally wired to communicate both power and information simultaneously, resulting in separate...

Hoelscher, David Louis

2009-05-15T23:59:59.000Z

245

Competition and bargaining in wireless networks with spectrum leasing  

E-Print Network [OSTI]

which have bought a license, giving them the exclusive right to use a fixed part of the radio spectrum a license which gives it the right to use spectrum, while the MVNO is a Secondary Operator (SO), which leases a fraction of the spectrum licensed to the PO. The SO is assumed to have deployed a new technology

Paris-Sud XI, Université de

246

Document: L1334 | Category: Physical Science, Materials License Status: Available for licensing || Texas Industry Cluster: Biotechnology and Life Sciences  

E-Print Network [OSTI]

for licensing || Texas Industry Cluster: Biotechnology and Life Sciences Nanocomposite membranes for energy. These markets include hydrogen production, medical devices, advanced materials, and drug delivery. Development Engineering, The University of Texas at Austin OTC Contact Brian Cummings, Associate Director, Life Sciences

Lightsey, Glenn

247

Power business Turning wireless power research into a top business  

E-Print Network [OSTI]

to replace conventional slip rings in the turbines with its wireless technology. "The challenge with wind-generation

Auckland, University of

248

Wireless Critical Process Control in oil and gas refinery plants  

E-Print Network [OSTI]

Wireless Critical Process Control in oil and gas refinery plants Stefano Savazzi1, Sergio Guardiano control in in- dustrial plants and oil/gas refineries. In contrast to wireline communication, wireless of an oil refinery is illustrated in Fig. 1: typical locations of wireless devices used for re- mote control

Savazzi, Stefano

249

Efficient Hybrid Key Agreement Protocol for Wireless Ad Hoc Networks  

E-Print Network [OSTI]

Efficient Hybrid Key Agreement Protocol for Wireless Ad Hoc Networks Xiang-Yang Li Yu Wang Ophir important aspects in ad-hoc wireless networks. To ensure the security, several cryptography protocols must efficient when applied to wireless ad-hoc networks. In this paper, we propose a key agreement protocol

Wang, Yu

250

Brief Contributions________________________________________________________________________________ Topology Control of Ad Hoc Wireless  

E-Print Network [OSTI]

________________________________________________________________________________ Topology Control of Ad Hoc Wireless Networks for Energy Efficiency Maggie X. Cheng, Member, IEEE, Mihaela, Yinfeng Xu, and Ding-Zhu Du Abstract--In ad hoc wireless networks, to compute the transmission power-complete problem. In this paper, we consider the approximated solutions for the MENC problem in ad hoc wireless

Wang, Lusheng

251

Topology Reconstruction and Characterisation of Wireless Ad Hoc Networks  

E-Print Network [OSTI]

Topology Reconstruction and Characterisation of Wireless Ad Hoc Networks Jon Arnold, Nigel Bean.sorell@adelaide.edu.au Abstract-- Wireless ad hoc networks provide a useful commu- nications infrastructure for the mobile Hoc Protocols, 802.11, Monitoring, Template Fitting, NS-2. I. INTRODUCTION Wireless Ad Hoc Networks

Roughan, Matthew

252

Information Commons Help Desk Internet / Connectivity Wireless Access  

E-Print Network [OSTI]

Information Commons Help Desk Internet / Connectivity » Wireless Access ID #1912 Connecting in the Username and Password fields.5. Info Commons Help Desk - Connecting to the UofT wireless netwo... http://help on this entry Info Commons Help Desk - Connecting to the UofT wireless netwo... http://help

Boonstra, Rudy

253

University of Maryland Baltimore (UMB) Wireless Security Standard  

E-Print Network [OSTI]

on building switch · All Access Points within the building to be contained in wireless VLAN Standard(sUniversity of Maryland Baltimore (UMB) Wireless Security Standard Effective Date: 04/14/03 Purpose This standard establishes a framework for ensuring that wireless networking technologies deployed within

Weber, David J.

254

Wireless  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

competitive exercises for national and international customers. And we support cybersecurity and control systems programs for the departments of Homeland Security, Energy and...

255

Regulators Experiences in Licensing and Inspection of Dry Cask Storage Facilities  

SciTech Connect (OSTI)

The United States Nuclear Regulatory Commission (NRC), through the combination of a rigorous licensing and inspection program, ensures the safety and security of dry cask storage. NRC authorizes the storage of spent fuel at an independent spent fuel storage installation (ISFSI) under two licensing options: site-specific licensing and general licensing. In July 1986, the NRC issued the first site-specific license to the Surry Nuclear Power Plant in Virginia authorizing the interim storage of spent fuel in a dry storage cask configuration. Today, there are over 30 ISFSIs currently licensed by the NRC with over 700 loaded dry casks. Current projections identify over 50 ISFSIs by the year 2010. No releases of spent fuel dry storage cask contents or other significant safety problems from the storage systems in use today have been reported. This paper discusses the NRC licensing and inspection experiences. (authors)

Baggett, S.; Brach, E.W. [Spent Fuel Project Office, U.S. Nuclear Regulatory Commission, Washington, DC 20555 (United States)

2006-07-01T23:59:59.000Z

256

Investing in the Energy Future: An Industry Guide to Licensing Technologies at the National Renewable Energy Laboratory (NREL) (Brochure)  

SciTech Connect (OSTI)

Provides an overview of NREL's licensing opportunities and processes, and commercialization programs.

Not Available

2010-09-01T23:59:59.000Z

257

Global estimation of precipitation using opaque microwave bands  

E-Print Network [OSTI]

This thesis describes the use of opaque microwave bands for global estimation of precipitation rate. An algorithm was developed for estimating instantaneous precipitation rate for the Advanced Microwave Sounding Unit (AMSU) ...

Chen, Frederick Wey-Min, 1975-

2004-01-01T23:59:59.000Z

258

Microwave vs. Electric Kettle: Which Appliance Is in Hot Water...  

Energy Savers [EERE]

Microwave vs. Electric Kettle: Which Appliance Is in Hot Water in EnergyFaceoff Round 4? Microwave vs. Electric Kettle: Which Appliance Is in Hot Water in EnergyFaceoff Round 4?...

259

Microwave off-gas treatment apparatus and process  

DOE Patents [OSTI]

The invention discloses a microwave off-gas system in which microwave energy is used to treat gaseous waste. A treatment chamber is used to remediate off-gases from an emission source by passing the off-gases through a susceptor matrix, the matrix being exposed to microwave radiation. The microwave radiation and elevated temperatures within the combustion chamber provide for significant reductions in the qualitative and quantitative emissions of the gas waste stream.

Schulz, Rebecca L. (Aiken, SC); Clark, David E. (Gainesville, FL); Wicks, George G. (North Aiken, SC)

2003-01-01T23:59:59.000Z

260

Red Hat Directory Server product licensing requirements have been changed,  

E-Print Network [OSTI]

information in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material. Warranty A copy of the specific warranty terms applicable to your Hewlett-Packard product and replacement parts can be obtained from your local Sales and Service Office. U.S. Government License Proprietary computer software. Valid license from HP required for possession, use or copying.

Hp-ux I V

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Completion of decommissioning: Monitoring for site release and license termination  

SciTech Connect (OSTI)

To request termination of a license upon completion of dismantling or decommissioning activities, documenting any residual radioactivity to show that the levels are environmentally acceptable will be necessary. When the regulators approve the decommissioning plan, they establish what the release criteria for the decommissioned site will be at the time of the site release and license termination. The criteria are numeric guidelines for direct radiation in soils and on surfaces. If the regulatory body finds that the measured on-site values are below the guidelines, the site will be acceptable for unrestricted release (no radiological controls or future use). If areas are found above those values, more decontamination or cleanup of these areas may be required unless the regulatory body grants an exemption.

Boing, L.E.

1997-08-01T23:59:59.000Z

262

Microwave accelerator E-beam pumped laser  

DOE Patents [OSTI]

A device and method for pumping gaseous lasers by means of a microwave accelerator. The microwave accelerator produces a relativistic electron beam which is applied along the longitudinal axis of the laser through an electron beam window. The incident points of the electron beam on the electron beam window are varied by deflection coils to enhance the cooling characteristics of the foil. A thyratron is used to reliably modulate the microwave accelerator to produce electron beam pulses which excite the laser medium to produce laser pulse repetition frequencies not previously obtainable. An aerodynamic window is also disclosed which eliminates foil heating problems, as well as a magnetic bottle for reducing laser cavity length and pressures while maintaining efficient energy deposition.

Brau, Charles A. (Los Alamos, NM); Stein, William E. (Los Alamos, NM); Rockwood, Stephen D. (Los Alamos, NM)

1980-01-01T23:59:59.000Z

263

Apparatus for microwave heat treatment of manufactured components  

DOE Patents [OSTI]

An apparatus for heat treating manufactured components using microwave energy and microwave susceptor material. Heat treating medium such as eutectic salts may be employed. A fluidized bed introduces process gases which may include carburizing or nitriding gases. The process may be operated in a batch mode or continuous process mode. A microwave heating probe may be used to restart a frozen eutectic salt bath.

Babcock & Wilcox Technical Services Y-12, LLC (Oak Ridge, TN)

2008-04-15T23:59:59.000Z

264

Methods for microwave heat treatment of manufactured components  

DOE Patents [OSTI]

An apparatus for heat treating manufactured components using microwave energy and microwave susceptor material. Heat treating medium such as eutectic salts may be employed. A fluidized bed introduces process gases which may include carburizing or nitriding gases. The process may be operated in a batch mode or continuous process mode. A microwave heating probe may be used to restart a frozen eutectic salt bath.

Ripley, Edward B. (Knoxville, TN)

2010-08-03T23:59:59.000Z

265

Race to license new MTBE and TAME routes heats up  

SciTech Connect (OSTI)

With refineries and petrochemical manufacturers continuing to gear up production of oxygenates for use in reformulated fuels, new routes to methyl tert-butyl ether (MTBE) and tert-amyl methyl ether (TAME) are clearly hot items in the licensing market. And probably nowhere has the competition become as intense as in offerings for skeletal isomerization technologies to boost ethers production from fluid catalytic cracking and steam cracking.

Rotman, D.

1993-01-06T23:59:59.000Z

266

Document: P1332 Category: Physical Sciences, Chemical/Materials License Status: Available for licensing Texas Industry Cluster: Petroleum Refining & Chemical Products  

E-Print Network [OSTI]

for licensing Texas Industry Cluster: Petroleum Refining & Chemical Products Lower-cost fuel cells ProblemInventors Document: P1332 Category: Physical Sciences, Chemical/Materials License Status: Available effective strategies government can pursue for cutting air emissions, responding to climate change, reducing

Lightsey, Glenn

267

Licensed reactor nuclear safety criteria applicable to DOE reactors  

SciTech Connect (OSTI)

The Department of Energy (DOE) Order DOE 5480.6, Safety of Department of Energy-Owned Nuclear Reactors, establishes reactor safety requirements to assure that reactors are sited, designed, constructed, modified, operated, maintained, and decommissioned in a manner that adequately protects health and safety and is in accordance with uniform standards, guides, and codes which are consistent with those applied to comparable licensed reactors. This document identifies nuclear safety criteria applied to NRC (Nuclear Regulatory Commission) licensed reactors. The titles of the chapters and sections of USNRC Regulatory Guide 1.70, Standard Format and Content of Safety Analysis Reports for Nuclear Power Plants, Rev. 3, are used as the format for compiling the NRC criteria applied to the various areas of nuclear safety addressed in a safety analysis report for a nuclear reactor. In each section the criteria are compiled in four groups: (1) Code of Federal Regulations, (2) US NRC Regulatory Guides, SRP Branch Technical Positions and Appendices, (3) Codes and Standards, and (4) Supplemental Information. The degree of application of these criteria to a DOE-owned reactor, consistent with their application to comparable licensed reactors, must be determined by the DOE and DOE contractor.

Not Available

1991-04-01T23:59:59.000Z

268

Wireless Demand Response Controls for HVAC Systems  

SciTech Connect (OSTI)

The objectives of this scoping study were to develop and test control software and wireless hardware that could enable closed-loop, zone-temperature-based demand response in buildings that have either pneumatic controls or legacy digital controls that cannot be used as part of a demand response automation system. We designed a SOAP client that is compatible with the Demand Response Automation Server (DRAS) being used by the IOUs in California for their CPP program, design the DR control software, investigated the use of cellular routers for connecting to the DRAS, and tested the wireless DR system with an emulator running a calibrated model of a working building. The results show that the wireless DR system can shed approximately 1.5 Watts per design CFM on the design day in a hot, inland climate in California while keeping temperatures within the limits of ASHRAE Standard 55: Thermal Environmental Conditions for Human Occupancy.

Federspiel, Clifford

2009-06-30T23:59:59.000Z

269

Microwave joining of SiC  

SciTech Connect (OSTI)

The purpose of this work is to optimize the properties of SiC-SiC joints made using microwave energy. The current focus is on identification of the most effective joining methods for scale-up to large tube assemblies, including joining using SiC produced in situ from chemical precursors. During FY 1996, a new microwave applicator was designed, fabricated and tested that provides the capability for vacuum baking of the specimens and insulation and for processing under inert environment. This applicator was used to join continuous fiber-reinforced (CFCC) SiC/SiC composites using a polymer precursor to form a SiC interlayer in situ.

Silberglitt, R.; Ahmad, I.; Tian, Y.L. [FM Technologies, Inc., Fairfax, VA (United States)] [and others

1997-04-01T23:59:59.000Z

270

ULTRA SECURE HIGH RELIABILITY WIRELESS RADIATION MONITOR  

SciTech Connect (OSTI)

Radiation monitoring in nuclear facilities is essential to safe operation of the equipment as well as protecting personnel. In specific, typical air monitoring of radioactive gases or particulate involves complex systems of valves, pumps, piping and electronics. The challenge is to measure a representative sample in areas that are radioactively contaminated. Running cables and piping to these locations is very expensive due to the containment requirements. Penetration into and out of an airborne or containment area is complex and costly. The process rooms are built with thick rebar-enforced concrete walls with glove box containment chambers inside. Figure 1 shows high temperature radiation resistance cabling entering the top of a typical glove box. In some case, the entire processing area must be contained in a 'hot cell' where the only access into the chamber is via manipulators. An example is shown in Figure 2. A short range wireless network provides an ideal communication link for transmitting the data from the radiation sensor to a 'clean area', or area absent of any radiation fields or radioactive contamination. Radiation monitoring systems that protect personnel and equipment must meet stringent codes and standards due to the consequences of failure. At first glance a wired system would seem more desirable. Concerns with wireless communication include latency, jamming, spoofing, man in the middle attacks, and hacking. The Department of Energy's Savannah River National Laboratory (SRNL) has developed a prototype wireless radiation air monitoring system that address many of the concerns with wireless and allows quick deployment in radiation and contamination areas. It is stand alone and only requires a standard 120 VAC, 60 Hz power source. It is designed to be mounted or portable. The wireless link uses a National Security Agency (NSA) Suite B compliant wireless network from Fortress Technologies that is considered robust enough to be used for classified data transmission in place of NSA Type 1 devices.

Cordaro, J.; Shull, D.; Farrar, M.; Reeves, G.

2011-08-03T23:59:59.000Z

271

Wireless Infrastructure for Performing Monitoring, Diagnostics, and Control HVAC and Other Energy-Using Systems in Small Commercial Buildings  

SciTech Connect (OSTI)

This project focused on developing a low-cost wireless infrastructure for monitoring, diagnosing, and controlling building systems and equipment. End users receive information via the Internet and need only a web browser and Internet connection. The system used wireless communications for: (1) collecting data centrally on site from many wireless sensors installed on building equipment, (2) transmitting control signals to actuators and (3) transmitting data to an offsite network operations center where it is processed and made available to clients on the Web (see Figure 1). Although this wireless infrastructure can be applied to any building system, it was tested on two representative applications: (1) monitoring and diagnostics for packaged rooftop HVAC units used widely on small commercial buildings and (2) continuous diagnosis and control of scheduling errors such as lights and equipment left on during unoccupied hours. This project developed a generic infrastructure for performance monitoring, diagnostics, and control, applicable to a broad range of building systems and equipment, but targeted specifically to small to medium commercial buildings (an underserved market segment). The proposed solution is based on two wireless technologies. The first, wireless telemetry, is used for cell phones and paging and is reliable and widely available. This risk proved to be easily managed during the project. The second technology is on-site wireless communication for acquiring data from sensors and transmitting control signals. The technology must enable communication with many nodes, overcome physical obstructions, operate in environments with other electrical equipment, support operation with on-board power (instead of line power) for some applications, operate at low transmission power in license-free radio bands, and be low cost. We proposed wireless mesh networking to meet these needs. This technology is relatively new and has been applied only in research and tests. This proved to be a major challenge for the project and was ultimately abandoned in favor of a directly wired solution for collecting sensor data at the building. The primary reason for this was the relatively short ranges at which we were able to effectively place the sensor nodes from the central receiving unit. Several different mesh technologies were attempted with similar results. Two hardware devices were created during the original performance period of the project. The first device, the WEB-MC, is a master control unit that has two radios, a CPU, memory, and serves as the central communications device for the WEB-MC System (Currently called the 'BEST Wireless HVAC Maintenance System' as a tentative commercial product name). The WEB-MC communicates with the local mesh network system via one of its antennas. Communication with the mesh network enables the WEB-MC to configure the network, send/receive data from individual motes, and serves as the primary mechanism for collecting sensor data at remote locations. The second antenna enables the WEB-MC to connect to a cellular network ('Long-Haul Communications') to transfer data to and from the NorthWrite Network Operations Center (NOC). A third 'all-in-one' hardware solution was created after the project was extended (Phase 2) and additional resources were provided. The project team leveraged a project funded by the State of Washington to develop a hardware solution that integrated the functionality of the original two devices. The primary reason for this approach was to eliminate the mesh network technical difficulties that severely limited the functionality of the original hardware approach. There were five separate software developments required to deliver the functionality needed for this project. These include the Data Server (or Network Operations Center), Web Application, Diagnostic Software, WEB-MC Embedded Software, Mote Embedded Software. Each of these developments was necessarily dependent on the others. This resulted in a challenging management task - requiring high bandwidth communications among

Patrick O'Neill

2009-06-30T23:59:59.000Z

272

International Conference on Microwave and High Frequency Heating Nottingham, UK, September 2013 Scaling Up Reactors for Microwave-Assisted  

E-Print Network [OSTI]

2013 316 Scaling Up Reactors for Microwave-Assisted Chemistry via ANN Optimization Andrew O. Holmesa by demonstrating that a particular microwave reactor can be designed with the help of computer optimization optimization technique to a microwave reactor. This technique is used here to optimize the geometry of a system

Yakovlev, Vadim

273

Consort: NodeConsort: Node--constrainedconstrained Opportunistic Routing in WirelessOpportunistic Routing in Wireless  

E-Print Network [OSTI]

on Mobile Computing, 2003. K. W. Choi, W. S. Jeon, and D. G. Jeong, "Efficient Load-Aware Routing Scheme. Sankar and Z. Liu, "Maximum Lifetime Routing in Wireless Ad- hoc Networks," IEEE INFOCOM'04. P. P. Pham

Xue, Guoliang

274

Tags, wireless communication systems, tag communication methods, and wireless communications methods  

DOE Patents [OSTI]

Tags, wireless communication systems, tag communication methods, and wireless communications methods are described. In one aspect, a tag includes a plurality of antennas configured to receive a plurality of first wireless communication signals comprising data from a reader, a plurality of rectifying circuits coupled with. respective individual ones of the antennas and configured to provide rectified signals corresponding to the first wireless communication signals, wherein the rectified signals are combined to produce a composite signal, an adaptive reference circuit configured to vary a reference signal responsive to the composite signal, a comparator coupled with the adaptive reference circuit and the rectifying circuits and configured to compare the composite signal with respect to the reference signal and to output the data responsive to the comparison, and processing circuitry configured to receive the data from the comparator and to process the data.

Scott; Jeff W. (Pasco, WA), Pratt; Richard M. (Richland, WA)

2006-09-12T23:59:59.000Z

275

Optimized ECR plasma apparatus with varied microwave window thickness  

DOE Patents [OSTI]

The present invention describes a technique to control the radial profile of microwave power in an ECR plasma discharge. In order to provide for a uniform plasma density to a specimen, uniform energy absorption by the plasma is desired. By controlling the radial profile of the microwave power transmitted through the microwave window of a reactor, the profile of the transmitted energy to the plasma can be controlled in order to have uniform energy absorption by the plasma. An advantage of controlling the profile using the window transmission characteristics is that variations to the radial profile of microwave power can be made without changing the microwave coupler or reactor design. 9 figs.

Berry, L.A.

1995-11-14T23:59:59.000Z

276

Preliminary separation of galactic and cosmic microwave emission for the COBE Differential Microwave Radiometer  

SciTech Connect (OSTI)

Preliminary models of microwave emission from the Milky Way Galaxy based on COBE and other data are constructed for the purpose of distinguishing cosmic and Galactic signals. Differential Microwave Radiometer (DMR) maps, with the modeled Galactic emission removed, are fitted for a quadrupole distribution. Autocorrelation functions for individual Galactic components are presented. When Galactic emission is removed from the DMR data, the residual fluctuations are virtually unaffected, and therefore they are not dominated by any known Galactic emission component. 42 refs.

Bennet, C.L.; Smoot, G.F.; Hinshaw, G.; Wright, E.L.; Kogut, A.; De Amici, G.; Meyer, S.S.; Weiss, R.; Wilkinson, D.T.; Gulkis, S. (NASA, Goddard Space Flight Center, Greenbelt, MD (United States) Lawrence Berkeley Laboratory, CA (United States) California, University, Berkeley (United States) Universities Space Research Association, Boulder, CO (United States) California, University, Los Angeles (United States) MIT, Cambridge, MA (United States) Princeton University, NJ (United States) JPL, Pasadena, Ca (United States))

1992-09-01T23:59:59.000Z

277

Policy #3310 Allowance for Usage of Personal Mobile Devices and Wireless Service for University Business 1 OLD DOMINION UNIVERSITY  

E-Print Network [OSTI]

with a wireless service allowance must maintain an active wireless service contract for the life of the allowance

278

Microwave Sensors Active and David G. Long  

E-Print Network [OSTI]

waves up through high energy gamma waves. Microwaves extend over an important part of the elec be classified as either passive (radiometers) or active (radars). Each sensor class provides unique insight instruments can be divided into two broad classes: pas- sive, known as radiometers, and active, known

Long, David G.

279

Farinon microwave end of life cycle  

SciTech Connect (OSTI)

This engineering report evaluates alternatives for the replacement of the Farinon microwave radio system. The system is beyond its expected life cycle and has decreasing maintainability. Principal applications supported by the Farinon system are two electrical utility monitor and control systems, the Integrated Transfer Trip System (ITTS), and the Supervisory Control and Data Acquisition (SCADA) system.

Poe, R.C.

1996-06-24T23:59:59.000Z

280

MICROWAVE PHOTOREACTOR FOR PHOTOCHEMICAL SYNTHESIS Milan Hajeka  

E-Print Network [OSTI]

and a IR pyrometer or fiber optic thermometer (Nortech), according to Figure 1. A round part (200 mm of the reaction mixture is monitored by the IR pyrometer or fiber optic thermometer. The MW photoreactor has been scientific discipline and microwave (MW) irradiation represents a new way to increase the efficiency of many

Cirkva, Vladimir

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Environmental assessment: South microwave communication facilities  

SciTech Connect (OSTI)

Western Area Power Administration (Western) is proposing to construct, operate, and maintain eight microwave repeater stations in southwestern Colorado, southeastern Utah, and northern Arizona, in order to meet the minimum fade criteria established by the Western Systems Coordinating Council (WSCC) for the operation and protection of electric power systems. The proposed microwave facilities would increase the reliability of communication. This environmental assessment (EA) describes the existing environmental conditions and the impacts from construction of the eight microwave communication facilities. The EA was prepared in compliance with the National Environmental Policy Act of 1969, the Council on Environmental Quality Regulations (40 CFR 1500-1508), and the Department of Energy Guidelines (52 FR 47662, December 15, 1987). The proposed project would consist of constructing eight microwave facilities, each of which would include a self-supported lattice tower, an equipment building, a propane tank, distribution lines to provide electric power to the sites, and access roads to the sites. The facilities would be constructed in San Miguel and Montezuma Counties in Colorado, San Juan County, Utah, and Navajo, Apache, Coconino, and Yavapai Counties in Arizona. 20 refs., 2 figs., 2 tabs.

Not Available

1989-06-01T23:59:59.000Z

282

Planar controlled zone microwave plasma system  

DOE Patents [OSTI]

An apparatus and method for initiating a process gas plasma. A conductive plate having a plurality of conductive fingers is positioned in a microwave applicator. An arc forms between the conductive fingers to initiate the formation of a plasma. A transport mechanism may convey process materials through the plasma. A spray port may be provided to expel processed materials.

Ripley, Edward B. (Knoxville, TN); Seals, Roland D. (Oak Ridge, TN); Morrell, Jonathan S. (Knoxvlle, TN)

2011-10-04T23:59:59.000Z

283

Guidelines for preparing and reviewing applications for the licensing of non-power reactors: Format and Content. NUREG-1537, Part 1  

SciTech Connect (OSTI)

NUREG - 1537, Part 1 gives guidance to non-power reactor licensees and applicants on the format and content of applications to the Nuclear Regulatory Commission for licensing actions. These licensing actions include construction permits and initial operating licenses, license renewals, amendments, conversions from highly enriched uranium to low-enriched uranium, decommissioning, and license termination.

NONE

1996-02-01T23:59:59.000Z

284

E-Print Network 3.0 - ad hoc wireless Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

wireless Search Powered by Explorit Topic List Advanced Search Sample search results for: ad hoc wireless Page: << < 1 2 3 4 5 > >> 1 Sum-of-Sinusoid channel models for wireless...

285

Ubiquitous communications for wireless personal area networks in a heterogeneous environment   

E-Print Network [OSTI]

The widespread use of wireless technologies has led to a tremendous development in wireless communication systems. Currently, an individual mobile user may carry multiple personal devices with multiple wireless interfaces, ...

Ma, Junkang

2010-06-28T23:59:59.000Z

286

Multiagent coordination in microgrids via wireless networks  

E-Print Network [OSTI]

The future smart grid is expected to be an integration of intelligent microgrids featured by localized electricity generation, storage, and consumption. Wireless communication is a promising means to facilitate pervasive microgrid monitoring and control at a high flexibility and low deployment cost

Hao Liang; Atef Abdrabou

287

Applications of Industrial Wireless Sensor Milan Erdelj  

E-Print Network [OSTI]

...................................... 10 1.3.2.2 Hazard ........................................ 10 1.3.2.3 Security manuscript, published in "Industrial Wireless Sensor Networks: Applications, Protocols, and Standards CRC the problems of air, water (together with waste water) pollution, but covers the production material pollution

Paris-Sud XI, Université de

288

Software Update Recovery for Wireless Sensor Networks  

E-Print Network [OSTI]

mechanism that uses loss-of- control to provide high-reliability, low energy, software updates, includingSoftware Update Recovery for Wireless Sensor Networks Stephen Brown1 and Cormac J. Sreenan2 1 Laboratory, University College Cork, Ireland Abstract. Updating software over the network is important

Sreenan, Cormac J.

289

Wireless networks and mobile Ivan Stojmenovic  

E-Print Network [OSTI]

medium #12;Nikola Tesla 1856-1943 · The Serbian-American inventor, electrical engineer, and scientist for long distance transfers · Polyphase motors to use the current · Built the world's first hydroelectric plant at Niagara Falls 1895 #12;Nikola Tesla's inventions · Radio/wireless transmission · US Supreme

Stojmenovic, Ivan

290

TESLA'S VISION OF THE WIRELESS GLOBAL COMMUNICATIONS  

E-Print Network [OSTI]

, at an AIEE meeting in New York, Tesla presented a lecture entitled "A New System of Alternate Current MotorsTESLA'S VISION OF THE WIRELESS GLOBAL COMMUNICATIONS Ljiljana Trajkovi Communication Networks;March 12, 2004 Kwantlen College Ljiljana Trajkovic, Simon Fraser University 2 Road map Tesla in 1890's

Trajkovic, Ljiljana

291

Radioactive Target Detection Using Wireless Sensor Network  

E-Print Network [OSTI]

. By using the physical law for nuclear radiation isotopes, this chapter proposes a statistical method for wireless sensor network data to detect and locate a hidden nuclear target in a large study area. The method shown that the proposed method is effective and efficient in detection and location of the nuclear

Zhang, Tonglin

292

Energy Cooperation in Energy Harvesting Wireless Communications  

E-Print Network [OSTI]

Energy Cooperation in Energy Harvesting Wireless Communications Berk Gurakan1 , Omur Ozel1 , Jing node, a relay node and a destination node where the source and the relay can harvest energy from the nature. Energy required for communication arrives (is harvested) at the transmitter and an unlimited

Ulukus, Sennur

293

Wireless LAN Security April 24, 2007  

E-Print Network [OSTI]

, and in the carelessness and ignorance that exists at the user and corporate IT level. Cracking methods have become much more sophisticated and innovative with wireless. Cracking has become much easier and more accessible in that proprietary company information is exposed and now there could exist a link from one company to the other

Gao, Jie

294

Communication in automation, including networking and wireless  

E-Print Network [OSTI]

Communication in automation, including networking and wireless Nicholas Kottenstette and Panos J and networking in automation is given. Digital communication fundamentals are reviewed and networked control are presented. 1 Introduction 1.1 Why communication is necessary in automated systems Automated systems use

Antsaklis, Panos

295

Multiagent Coordination in Microgrids via Wireless Networks  

E-Print Network [OSTI]

is indispensable to incorporate more distributed energy resource (DER) units, such as the distributed generation load (or generator) or islanded as a self-sustained power system, which significantly simplifies by localized elec- tricity generation, storage, and consumption. Wireless communication is a promising means

Shen, Xuemin "Sherman"

296

Partially Controlled Deployment Strategies for Wireless Sensors  

E-Print Network [OSTI]

be formed and used in several application scenarios: smart home environ- ments, intrusion detection a certain set of grid-like strategies that reflect the (one- or two-dimensional) symmetry of the region years. By con- necting tiny, smart sensor nodes by means of wireless transceivers, large WSNs Part

Santi, Paolo

297

Wireless Link Scheduling under Physical Interference Model  

E-Print Network [OSTI]

approximation algorithms for link scheduling with or without power control. Index Terms--Link schedulingWireless Link Scheduling under Physical Interference Model Peng-Jun Wan, Ophir Frieder, Xiaohua Jia: jia@cs.cityu.edu.hk, csfyao@cityu.edu.hk Abstract--Link scheduling is a fundamental problem in multi

Jia, Xiaohua

298

Graphene-enabled Wireless Communication Networks  

E-Print Network [OSTI]

Graphene-enabled Wireless Communication Networks at the Nanoscale 1 Ignacio Llatser Nanonetworking;Graphene Honeycomb lattice of carbon atoms 2-dimensional material Discovered by A. K. Geim and K. S. Novoselov 9 Graphene G. Liu, W. Stillman, S. Rumyantsev, Q. Shao, M. Shur, A. A. Balandin, "Low

Politècnica de Catalunya, Universitat

299

Green Wireless Cognition: Future Efficient Spectrum Sharing  

E-Print Network [OSTI]

Underwater Vehicles The project aims to develop an unmanned fully autonomous under water vehicles (UWV Spectrum Wireless Sensor in Underwater Networks * Bell's Law of Computer Classes formulated by Gordon Bell the challenges of underwater communications by an integration of sensor and multihop networks. Human

Shihada, Basem

300

E-Print Network 3.0 - ag license number Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Note: If both crab... , this vessel may not receive this license by transfer. Enter the name, ADF&G vessel registration number, USCG... documentation number, and the...

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

E-Print Network 3.0 - assisted license application Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

A copy of the business license issued by the state in which the Cooperative is registered... Application for Rockfish CQ Page 1 of 6 Revised: 02022010 OMB Control ......

302

Procurement of a fully licensed radioisotope thermoelectric generator transportation system  

SciTech Connect (OSTI)

A fully licensed transportation system for Radioisotope Thermoelectric Generators and Light-Weight Radioisotope Heater Units is currently being designed and built. The system will comply with all applicable U.S. Department of Transportation regulations without the use of a DOE Alternative.'' The U.S. Department of Transportation has special double containment'' requirements for plutonium. The system packaging uses a doubly contained bell jar'' concept. A refrigerated trailer is used for cooling the high-heat payloads. The same packaging is used for both high- and low-heat payloads. The system is scheduled to be available for use by mid-1992.

Adkins, H.E.; Bearden, T.E. (Westinghouse Hanford Company, P.O. Box 1970, N1-42, Richland, Washington 99352 (US))

1991-01-01T23:59:59.000Z

303

Procurement of a fully licensed radioisotope thermoelectric generator transportation system  

SciTech Connect (OSTI)

A fully licensed transportation system for Radioisotope Thermoelectric Generators and Light-Weight Radioisotope Heater Units is currently being designed and built. The system will comply with all applicable US Department of Transportation regulations without the use of a DOE Alternative.'' The US Department of Transportation has special double containment'' requirements for plutonium. The system packaging uses a doubly contained bell jar'' concept. A refrigerated trailer is used for cooling the high-heat payloads. The same packaging is used for both high- and low-heat payloads. The system is scheduled to be available for use by mid-1992. 4 refs., 4 figs., 2 tabs.

Adkins, H.E.; Bearden, T.E.

1990-10-01T23:59:59.000Z

304

LicenseAcquisitionIPI.pdf | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietipDepartmentJuneWhenJuly 28, 2010ofLicenseAcquisitionIPI.pdf More

305

Technology available for license: Charging of liquid energy storage media  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatus TomAboutManusScience and How To License ORNLTechnology

306

Apparatus and method for microwave processing of materials  

DOE Patents [OSTI]

Disclosed is a variable frequency microwave heating apparatus designed to allow modulation of the frequency of the microwaves introduced into a furnace cavity for testing or other selected applications. The variable frequency heating apparatus is used in the method of the present invention to monitor the resonant processing frequency within the furnace cavity depending upon the material, including the state thereof, from which the workpiece is fabricated. The variable frequency microwave heating apparatus includes a microwave signal generator and a high-power microwave amplifier or a microwave voltage-controlled oscillator. A power supply is provided for operation of the high-power microwave oscillator or microwave amplifier. A directional coupler is provided for detecting the direction and amplitude of signals incident upon and reflected from the microwave cavity. A first power meter is provided for measuring the power delivered to the microwave furnace. A second power meter detects the magnitude of reflected power. Reflected power is dissipated in the reflected power load. 10 figs.

Johnson, A.C.; Lauf, R.J.; Bible, D.W.; Markunas, R.J.

1996-05-28T23:59:59.000Z

307

Apparatus and method for microwave processing of materials  

DOE Patents [OSTI]

A variable frequency microwave heating apparatus (10) designed to allow modulation of the frequency of the microwaves introduced into a furnace cavity (34) for testing or other selected applications. The variable frequency heating apparatus (10) is used in the method of the present invention to monitor the resonant processing frequency within the furnace cavity (34) depending upon the material, including the state thereof, from which the workpiece (36) is fabricated. The variable frequency microwave heating apparatus (10) includes a microwave signal generator (12) and a high-power microwave amplifier (20) or a microwave voltage-controlled oscillator (14). A power supply (22) is provided for operation of the high-power microwave oscillator (14) or microwave amplifier (20). A directional coupler (24) is provided for detecting the direction and amplitude of signals incident upon and reflected from the microwave cavity (34). A first power meter (30) is provided for measuring the power delivered to the microwave furnace (32). A second power meter (26) detects the magnitude of reflected power. Reflected power is dissipated in the reflected power load (28).

Johnson, Arvid C. (Lake in the Hills, IL); Lauf, Robert J. (Oak Ridge, TN); Bible, Don W. (Clinton, TN); Markunas, Robert J. (Chapel Hill, NC)

1996-01-01T23:59:59.000Z

308

Final Scientific Report - Wireless and Sensing Solutions Advancing Industrial Efficiency  

SciTech Connect (OSTI)

The project team's goal for the Wireless and Sensing Solution Advancing Industrial Efficiency award (DE-FC36-04GO14002) was to develop, demonstrate, and test a number of leading edge technologies that could enable the emergence of wireless sensor and sampling systems for the industrial market space. This effort combined initiatives in advanced sensor development, configurable sampling and deployment platforms, and robust wireless communications to address critical obstacles in enabling enhanced industrial efficiency.

Budampati, Rama; McBrady, Adam; Nusseibeh, Fouad

2009-09-28T23:59:59.000Z

309

Microsoft Word - Wireless Automation World for OE FINAL.doc  

Broader source: Energy.gov (indexed) [DOE]

Automation World Features New White Paper on Wireless Security, Interviews Authors April 16, 2009 The April 2009 issue of Automation World magazine features the white paper...

310

Planning Wireless Networks with Demand Uncertainty using Robust ...  

E-Print Network [OSTI]

Abstract An optimal planning of future wireless networks is fundamental to satisfy rising traffic ..... COST 231. Urban micro cell measurements and building data.

2011-03-04T23:59:59.000Z

311

Power and spectrum efficient communications in wireless ad hoc networks  

E-Print Network [OSTI]

Ephremides, “Joint Scheduling and Power Control for WirelessOptimal Power Control, Scheduling, and Routing in UWBDistributed Joint Scheduling and Power Control Algorithm for

Qu, Qi

2008-01-01T23:59:59.000Z

312

Wireless Plug-in Electric Vehicle (PEV) Charging  

Broader source: Energy.gov (indexed) [DOE]

(contd.) * Wireless power transfer using magnetic resonance coupling of air core transformer. - Power converter to regulate and drive resonant coil system - Simple uncontrolled...

313

Nonlinear multiferroic phase shifters for microwave frequencies  

SciTech Connect (OSTI)

A nonlinear microwave phase shifter based on a planar multiferroic composite has been studied. The multiferroic structure is fabricated in the form of a bilayer consisting of yttrium iron garnet and barium strontium titanate. The principle of operation of the device is based on the linear and nonlinear control of the phase shift of the hybrid spin-electromagnetic waves propagating in the bilayer. The linear control is realized with magnetic and electric fields. The nonlinear control is provided by the input power of microwave signal. The device showed a nonlinear phase shift up to 250°, electric field induced phase shift up to 330°, and magnetic field induced phase shift of more than 180°.

Ustinov, Alexey B.; Kalinikos, Boris A. [Department of Physical Electronics and Technology, St. Petersburg Electrotechnical University, St. Petersburg 197376 (Russian Federation); Srinivasan, G. [Department of Physics, Oakland University, Rochester, Michigan 48309 (United States)

2014-02-03T23:59:59.000Z

314

Hybrid Microwave-Cavity Heat Engine  

E-Print Network [OSTI]

We propose and analyze the use of hybrid microwave cavities as quantum heat engines. A possible realization consists of two macroscopically separated quantum dot conductors coupled capacitively to the fundamental mode of a microwave cavity. We demonstrate that an electrical current can be induced in one conductor through cavity-mediated processes by heating up the other conductor. The heat engine can reach Carnot efficiency with optimal conversion of heat to work. When the system delivers the maximum power, the efficiency can be a large fraction of the Carnot efficiency. The heat engine functions even with moderate electronic relaxation and dephasing in the quantum dots. We provide detailed estimates for the electrical current and output power using realistic parameters.

Christian Bergenfeldt; Peter Samuelsson; Björn Sothmann; Christian Flindt; Markus Büttiker

2014-02-27T23:59:59.000Z

315

Aging management of nuclear power plant containments for license renewal  

SciTech Connect (OSTI)

In 1990, the Nuclear Management and Resources Council (NUMARC), now the Nuclear Energy Institute (NEI), submitted for NRC review, the industry reports (IRs), NUMARC Report 90-01 and NUMARC Report 90-10, addressing aging management issues associated with PWR containments and BWR containments for license renewal, respectively. In 1996, the Commission amended 10 CFR 50.55a to promulgate requirements for inservice inspection of containment structures. This rule amendment incorporates by reference the 1992 Edition with the 1992 Addenda of Subsections IWE and IWL of the ASME Code addressing the inservice inspection of metal containments/liners and concrete containments, respectively. The purpose of this report is to reconcile the technical information and agreements resulting from the NUMARC IR reviews which are generally described in NUREG-1557 and the inservice inspection requirements of subsections IWE and IWL as promulgated in {section}50.55a for license renewal consideration. This report concludes that Subsections IWE and IWL as endorsed in {section}50.55a are generally consistent with the technical agreements reached during the IR reviews. Specific exceptions are identified and additional evaluations and augmented inspections for renewal are recommended.

Liu, W.C.; Kuo, P.T.; Lee, S.S.

1997-09-01T23:59:59.000Z

316

Sodium fast reactor safety and licensing research plan. Volume I.  

SciTech Connect (OSTI)

This report proposes potential research priorities for the Department of Energy (DOE) with the intent of improving the licensability of the Sodium Fast Reactor (SFR). In support of this project, five panels were tasked with identifying potential safety-related gaps in available information, data, and models needed to support the licensing of a SFR. The areas examined were sodium technology, accident sequences and initiators, source term characterization, codes and methods, and fuels and materials. It is the intent of this report to utilize a structured and transparent process that incorporates feedback from all interested stakeholders to suggest future funding priorities for the SFR research and development. While numerous gaps were identified, two cross-cutting gaps related to knowledge preservation were agreed upon by all panels and should be addressed in the near future. The first gap is a need to re-evaluate the current procedures for removing the Applied Technology designation from old documents. The second cross-cutting gap is the need for a robust Knowledge Management and Preservation system in all SFR research areas. Closure of these and the other identified gaps will require both a reprioritization of funding within DOE as well as a re-evaluation of existing bureaucratic procedures within the DOE associated with Applied Technology and Knowledge Management.

Sofu, Tanju (Argonne National Laboratory, Argonne, IL); LaChance, Jeffrey L.; Bari, R. (Brokhaven National Laboratory Upton, NY); Wigeland, Roald (Idaho National Laboratory, Idaho Falls, ID); Denman, Matthew R.; Flanagan, George F. (Oak Ridge National Laboratory, Oak Ridge, TN)

2012-05-01T23:59:59.000Z

317

Cosmic Microwave Background: Past, Future, and Present  

E-Print Network [OSTI]

I explain the origin and evolution of anisotropies in the Cosmic Microwave Background (CMB) and argue that upcoming experiments will measure cosmological and fundamental parameters very accurately. Most of the paper focuses on present data, which strongly suggest that the universe is flat. Several arguments are given to prove that present data sets are not contaminated by systematics. New techniques to compare different experiments visually are introduced. These are illustrated for two years of the MSAM and Python experiments.

Scott Dodelson

1999-12-22T23:59:59.000Z

318

ARM - Measurement - Microwave narrowband brightness temperature  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUC : XDCResearch Relatedcontent ARM Data DiscoverygovMeasurementsMicrowave

319

Quantum and Wave Dynamical Chaos in Superconducting Microwave Billiards  

E-Print Network [OSTI]

Experiments with superconducting microwave cavities have been performed in our laboratory for more than two decades. The purpose of the present article is to recapitulate some of the highlights achieved. We briefly review (i) results obtained with flat, cylindrical microwave resonators, so-called microwave billiards, concerning the universal fluctuation properties of the eigenvalues of classically chaotic systems with no, a threefold and a broken symmetry; (ii) summarize our findings concerning the wave-dynamical chaos in three-dimensional microwave cavities; (iii) present a new approach for the understanding of the phenomenon of dynamical tunneling which was developed on the basis of experiments that were performed recently with unprecedented precision, and finally, (iv) give an insight into an ongoing project, where we investigate universal properties of (artificial) graphene with superconducting microwave photonic crystals that are enclosed in a microwave resonator, i.e., so-called Dirac billiards.

B. Dietz; A. Richter

2015-04-16T23:59:59.000Z

320

Quantum and Wave Dynamical Chaos in Superconducting Microwave Billiards  

E-Print Network [OSTI]

Experiments with superconducting microwave cavities have been performed in our laboratory for more than two decades. The purpose of the present article is to recapitulate some of the highlights achieved. We briefly review (i) results obtained with flat, cylindrical microwave resonators, so-called microwave billiards, concerning the universal fluctuation properties of the eigenvalues of classically chaotic systems with no, a threefold and a broken symmetry; (ii) summarize our findings concerning the wave-dynamical chaos in three-dimensional microwave cavities; (iii) present a new approach for the understanding of the phenomenon of dynamical tunneling which was developed on the basis of experiments that were performed recently with unprecedented precision, and finally, (iv) give an insight into an ongoing project, where we investigate universal properties of (artificial) graphene with superconducting microwave photonic crystals that are enclosed in a microwave resonator, i.e., so-called Dirac billiards.

B. Dietz; A. Richter

2015-04-17T23:59:59.000Z

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Decentralized licensing of complementary patents: Comparing the royalty, ...xed-fee and  

E-Print Network [OSTI]

Decentralized licensing of complementary patents: Comparing the royalty, ...xed-fee and two-unit royalty and two-part tari¤ regimes, and compare their performances in terms of licensing revenue, price increased steeply (Bekkers et al., 2002; Simcoe, 2005), thereby rais- ing a royalty stacking problem, also

Paris-Sud XI, Université de

322

Albert Einstein College of Medicine Amendment to Non-human Use of Radioactive Material License  

E-Print Network [OSTI]

RSO-2 Rev.0 Albert Einstein College of Medicine Amendment to Non-human Use of Radioactive Material License INSTRUCTIONS: If you wish to make changes to your license to use radioactive material please exposure; Glove box: Mechanical pipettes: Fume hood: Absorbent liner & Tray Shielding: Lead: Lucite: GM

Emmons, Scott

323

Comparative analysis of LMFBR licensing in the United States and other countries - notably France. Final report  

SciTech Connect (OSTI)

This report presents an analysis of LMFBR licensing in the United States. It approaches this question broadly, examining first the system in the United States with the various sectors of the nuclear power economy, and the experience of that system in LWR licensing. It then examines the nature of LMFBR safety licensing questions - to the degree that they differ from those of LWR's - and surveys the experience of the United States and other countries in LMFBR safety licensing. Special attention is devoted to the case of France because of the technical leadership which the French program has provided, and because of the apparent efficiency with which French licensing is performed. The French licensing system and LWR licensing experience are examined, and conclusions drawn regarding the reasons for their effectiveness. Finally, a general comparison of the United States and foreign licensing systems is performed, proposals offered during the recent past for changes in the United States system are examined, and possibilities for future changes are suggested.

Golay, M.W.; Castillo, M.

1981-09-30T23:59:59.000Z

324

University of Rochester Model Non-Exclusive Patent License revised 11-08-2013  

E-Print Network [OSTI]

University of Rochester Model Non-Exclusive Patent License revised 11-08-2013 DRAFT DATED__________ FOR DISCUSSION PURPOSES ONLY NON EXCLUSIVE PATENT LICENSE AGREEMENT This agreement (hereinafter "Agreement, University is the owner by assignment of the Patent Rights as defined below. 1.2 University desires

325

Profit Neutrality in Licensing: The Boundary Between Antitrust Law and Patent Law  

E-Print Network [OSTI]

Profit Neutrality in Licensing: The Boundary Between Antitrust Law and Patent Law Stephen M. Maurer a century, courts and commentators have struggled to find principles that reconcile patent and antitrust law, especially as to patent licensing. We interpret case law and commentary to arrive at three unifying

Sadoulet, Elisabeth

326

ON LICENSING AND DIFFUSION OF CLEAN TECHNOLOGIES IN Idrissa G.-O. SIBAILLY  

E-Print Network [OSTI]

ON LICENSING AND DIFFUSION OF CLEAN TECHNOLOGIES IN OLIGOPOLY Idrissa G.-O. SIBAILLY November 2013:chantal.poujouly@polytechnique.edu hal-00911453,version1-16Dec2013 #12;On licensing and diffusion of clean technologies in oligopoly Idrissa G.-O. SIBAILLY This version: November 30, 2013. Abstract Clean technologies implemented

Boyer, Edmond

327

Issues in microwave power systems engineering  

SciTech Connect (OSTI)

The key issues in microwave power system engineering are beam safety, frequency allocation, and affordability. These major issues are presented, discussed, and suggestions for resolving them are offered. The issue of beam safety can be captured in the phrase ``Fear of Frying.`` Can a properly engineered beamed power safety system allay the public perception of microwave radiation dangers? Openness, visibility, and education may be keys to resolving this issue satisfactorily. ``Not in my Spectrum`` is a phrase that is frequently encountered in connection with the issue of where can the microwave power beam frequency be located. International cooperation may provide a part of the solution to this issue. ``Wow, that much?`` is a phrase encountered when dealing with the issue of economic affordability of large beamed power systems. A phased engineering approach for multiple uses even during construction is presented to aid in garnering revenue during the system build phase. Also, dual mode dc-RF converters are encouraged for bi-directional power flow utility and economies of scale in production.

Dickinson, R.M. [California Inst. of Tech., Pasadena, CA (United States). Jet Propulsion Lab.

1996-12-31T23:59:59.000Z

328

Joining of thermoplastic substrates by microwaves  

DOE Patents [OSTI]

A method for joining two or more items having surfaces of thermoplastic material includes the steps of depositing an electrically-conductive material upon the thermoplastic surface of at least one of the items, and then placing the other of the two items adjacent the one item so that the deposited material is in intimate contact with the surfaces of both the one and the other items. The deposited material and the thermoplastic surfaces contacted thereby are then exposed to microwave radiation so that the thermoplastic surfaces in contact with the deposited material melt, and then pressure is applied to the two items so that the melted thermoplastic surfaces fuse to one another. Upon discontinuance of the exposure to the microwave energy, and after permitting the thermoplastic surfaces to cool from the melted condition, the two items are joined together by the fused thermoplastic surfaces. The deposited material has a thickness which is preferably no greater than a skin depth, .delta..sub.s, which is related to the frequency of the microwave radiation and characteristics of the deposited material in accordance with an equation.

Paulauskas, Felix L. (Oak Ridge, TN); Meek, Thomas T. (Knoxville, TN)

1997-01-01T23:59:59.000Z

329

E-Print Network 3.0 - argon microwave plasma Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Vortex Stabilization of Microwave PlasmaMicrowave... Plasma a b 2 1 3 5 4 6 7 1- quartz tube of microwave plasma torch; 2 -original tangential gas feeder; 3... Numerical Simulation...

330

Wireless energy transfer between anisotropic metamaterials shells  

SciTech Connect (OSTI)

The behavior of strongly coupled Radial Photonic Crystals shells is investigated as a potential alternative to transfer electromagnetic energy wirelessly. These sub-wavelength resonant microstructures, which are based on anisotropic metamaterials, can produce efficient coupling phenomena due to their high quality factor. A configuration of selected constitutive parameters (permittivity and permeability) is analyzed in terms of its resonant characteristics. The coupling to loss ratio between two coupled resonators is calculated as a function of distance, the maximum (in excess of 300) is obtained when the shells are separated by three times their radius. Under practical conditions an 83% of maximum power transfer has been also estimated. -- Highlights: •Anisotropic metamaterial shells exhibit high quality factors and sub-wavelength size. •Exchange of electromagnetic energy between shells with high efficiency is analyzed. •Strong coupling is supported with high wireless transfer efficiency. •End-to-end energy transfer efficiencies higher than 83% can be predicted.

Díaz-Rubio, Ana; Carbonell, Jorge; Sánchez-Dehesa, José, E-mail: jsdehesa@upv.es

2014-06-15T23:59:59.000Z

331

Analyzing Options for Airborne Emergency Wireless Communications  

SciTech Connect (OSTI)

In the event of large-scale natural or manmade catastrophic events, access to reliable and enduring commercial communication systems is critical. Hurricane Katrina provided a recent example of the need to ensure communications during a national emergency. To ensure that communication demands are met during these critical times, Idaho National Laboratory (INL) under the guidance of United States Strategic Command has studied infrastructure issues, concerns, and vulnerabilities associated with an airborne wireless communications capability. Such a capability could provide emergency wireless communications until public/commercial nodes can be systematically restored. This report focuses on the airborne cellular restoration concept; analyzing basic infrastructure requirements; identifying related infrastructure issues, concerns, and vulnerabilities and offers recommended solutions.

Michael Schmitt; Juan Deaton; Curt Papke; Shane Cherry

2008-03-01T23:59:59.000Z

332

MARGINAL EXPENSE OIL WELL WIRELESS SURVEILLANCE MEOWS  

SciTech Connect (OSTI)

A marginal expense oil well wireless surveillance system to monitor system performance and production from rod-pumped wells in real time from wells operated by Vaquero Energy in the Edison Field, Main Area of Kern County in California has been successfully designed and field tested. The surveillance system includes a proprietary flow sensor, a programmable transmitting unit, a base receiver and receiving antenna, and a base station computer equipped with software to interpret the data. First, the system design is presented. Second, field data obtained from three wells is shown. Results of the study show that an effective, cost competitive, real-time wireless surveillance system can be introduced to oil fields across the United States and the world.

Mason M. Medizade; John R. Ridgely; Donald G. Nelson

2004-11-01T23:59:59.000Z

333

Wireless boundary monitor system and method  

DOE Patents [OSTI]

A wireless boundary monitor system used to monitor the integrity of a boundary surrounding an area uses at least two housings having at least one transmitting means for emitting ultrasonic pressure waves to a medium. Each of the housings has a plurality of receiving means for sensing the pressure waves in the medium. The transmitting means and the receiving means of each housing are aimable and communicably linked. At least one of the housings is equipped with a local alarm means for emitting a first alarm indication whereby, when the pressure waves propagating from a transmitting means to a receiving means are sufficiently blocked by an object a local alarm means or a remote alarm means or a combination thereof emit respective alarm indications. The system may be reset either manually or automatically. This wireless boundary monitor system has useful applications in both indoor and outdoor environments.

Haynes, Howard D. (Knoxville, TN); Ayers, Curtis W. (Kingston, TN)

1997-01-01T23:59:59.000Z

334

Wireless boundary monitor system and method  

DOE Patents [OSTI]

A wireless boundary monitor system used to monitor the integrity of a boundary surrounding an area uses at least two housings having at least one transmitting means for emitting ultrasonic pressure waves to a medium. Each of the housings has a plurality of receiving means for sensing the pressure waves in the medium. The transmitting means and the receiving means of each housing are aimable and communicably linked. At least one of the housings is equipped with a local alarm means for emitting a first alarm indication whereby, when the pressure waves propagating from a transmitting means to a receiving means are sufficiently blocked by an object a local alarm means or a remote alarm means or a combination thereof emit respective alarm indications. The system may be reset either manually or automatically. This wireless boundary monitor system has useful applications in both indoor and outdoor environments. 4 figs.

Haynes, H.D.; Ayers, C.W.

1997-12-09T23:59:59.000Z

335

Microwave-Assisted Ignition for Improved Internal Combustion Engine Efficiency  

E-Print Network [OSTI]

J. B. (1988) Internal Combustion Engine Fundamentals.novel microwave internal combustion engine ignition source,in the Internal Combustion Engine." SAE Technical Paper

DeFilippo, Anthony Cesar

2013-01-01T23:59:59.000Z

336

Hydrogen recovery from extraterrestrial materials using microwave energy  

SciTech Connect (OSTI)

The feasibility of recovering hydrogen from extraterrestrial materials (lunar and Martian soils, asteroids) using microwave energy is presented. Reasons for harvesting and origins and locations of hydrogen are reviewed. Problems of hydrogen recovery are discussed in terms of hydrogen release characteristics and microwave coupling to insulating materials. From results of studies of hydrogen diffusivities (oxides, glasses) and tritium release (oxides) as well as studies of microwave coupling to ilmenite, alkali basalt and ceramic oxides it is concluded that using microwave energy in hydrogen recovery from extraterrestrial materials could be the basis for a workable process.

Tucker, D.S.; Vaniman, D.T.; Anderson, J.L.; Clinard, F.W. Jr.; Feber, R.C. Jr.; Frost, H.M.; Meek, T.T.; Wallace, T.C.

1984-01-01T23:59:59.000Z

337

Method and apparatus for thickness measurement using microwaves  

DOE Patents [OSTI]

The method for measuring the thickness of a material which transmits a detectable amount of microwave radiation includes irradiating the material with coherent microwave radiation tuned over a frequency range. Reflected microwave radiation is detected, the reflected radiation having maxima and minima over the frequency range as a result of coherent interference of microwaves reflected from reflecting surfaces of the material. The thickness of the material is determined from the period of the maxima and minima along with knowledge of the index of refraction of the material.

Woskov, Paul (Bedford, MA) [Bedford, MA; Lamar, David A. (West Richland, WA) [West Richland, WA

2001-01-01T23:59:59.000Z

338

advanced microwave circuits: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

transition of photons in circuit quantum electrodynamics electrodynamics QED , superconduct- ing qubits are coupled with microwave photons in a trans- mission line and a...

339

Microwave-Assisted Ignition for Improved Internal Combustion Engine Efficiency  

E-Print Network [OSTI]

of Emissions from HCCI Engines using a Consistent 3-Zoneof Microwave Plasma Combustion Engine (Part I: Concept ofPlasma Combustion Engine (Part II: Engine Performance of

DeFilippo, Anthony Cesar

2013-01-01T23:59:59.000Z

340

Wireless Networks A Cross-layer Perspective  

E-Print Network [OSTI]

214BC Great wall built by Shih Huang-Ti Fire towers to serve as alarms 500km (Great Wall to Hsien-yang) in 2 hours Transmission bandwidth 10-4 bits/s #12;A Brief History of Wireless Claude Chappe and the semaphore Played a key role in french revolution A tower for every 20km from Lille to Paris in 1792 Part

Libre de Bruxelles, Université

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Hierarchical implementation of a wireless communications system  

E-Print Network [OSTI]

Implementafion Method. 1. 3 Literature Survey. 2 9 11 II TRANSCEIVER SYSTEM-LEVEL DESIGN AND MODELING. . . . . . 15 2. 1 2. 2 2. 3 2. 4 The Personal Communications System. System Specifications . 15 19 Wireless Communicafions Channel Description... 366 IX EXPER~AL RESULTS . 372 9. 1 9. 2 9. 3 9. 4 9. 5 9. 6 9. 7 9. 8 9. 9 Testing Strategy Convolutional Encoder . 64-Ary Modulator . Long-Code Sequence Generator and Spreader . . . . . . . . . . . . . . . . I and Q Channel Sequence...

Mayhugh, Terry L

2012-06-07T23:59:59.000Z

342

E-Print Network 3.0 - advanced microwave scanning Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

measurements. Near-field microwave reflectometer... -field microwave probe and signal processing section. This automated scanning 12;platform is easy to use... scanning...

343

E-Print Network 3.0 - active microwave medium Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

MA: Artech House, 1981... . 41 F. Ulaby, R. Moore, and A. K. Fung, Microwave Remote Sensing: Active and Passive, vol. 3. Norwood... Sat Passive Microwave Polarimetric...

344

E-Print Network 3.0 - analogue microwave photonics Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Engineering ; Materials Science 6 Abstract--A novel approach to generating a frequency-tunable microwave or sub-terahertz wave based on time-delayed Summary: , microwave...

345

E-Print Network 3.0 - aura microwave limb Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

measured by the Aura Microwave Limb Sounder (MLS) version 2... of the greenhouse effect. Nature, 342, 758-761. Read, W. G., and Coauthors, 2007: Aura Microwave Limb...

346

SWAP Project: Beyond the State of the Art on Harvested Energy-Powered Wireless Sensors  

E-Print Network [OSTI]

-efficient paradigm of wireless sensor networks with the self-sustainable capabilities of harvesting systems. SWAP

Rossi, Michele

347

Energy Efficiency of Symmetric Key Cryptographic Algorithms in Wireless Sensor Networks  

E-Print Network [OSTI]

Energy Efficiency of Symmetric Key Cryptographic Algorithms in Wireless Sensor Networks Xueying-- In this paper, we examine the energy efficiency of symmetric key cryptographic algorithms applied in wireless energy efficiency with a level of security suitable for wireless sensor networks. Keywords - wireless

Heys, Howard

348

AP1000{sup R} licensing and deployment in the United States  

SciTech Connect (OSTI)

In recent years, both domestic and foreign utilities have turned to the standardized Westinghouse AP1000 plant design in satisfying their near - and long-term - sustainable energy needs. As direct support to these actions, licensing the AP1000 design has played a significant role by providing one of the fundamental bases in clearing regulatory hurdles leading to the start of new plant construction. Within the U.S. alone, Westinghouse AP1000 licensing activities have reached unprecedented milestones with the approvals of both AP1000 Design Certification and Southern Company's combined construction permit and operating license (COL) application directly supporting the construction of two new nuclear plants in Georgia. Further COL application approvals are immediately pending for an additional two AP1000 plants in South Carolina. And, across the U.S. nuclear industry spectrum, there are 10 other COL applications under regulatory review representing some 16 new plants at 10 sites. In total, these actions represent the first wave of new plant licensing under the regulatory approval process since 1978. Fundamental to the Nuclear Regulatory Commission's AP1000 Design Certification is the formal recognition of the AP1000 passive safety design through regulatory acceptance rulemaking. Through recognition and deployment of the AP1000 Design Certification, the utility licensee / operator of this reactor design are now offered an opportunity to use a simplified 'one-step' combined license process, thereby managing substantial back-end construction schedule risk from regulatory and intervention delays. Application of this regulatory philosophy represents both acceptance and encouragement of standardized reactor designs like the AP1000. With the recent AP1000 Design Certification and utility COL acceptances, the fundamental licensing processes of this philosophy have successfully proven the attainment of significant milestones with the next stage licensing actions directed towards deployment. AP1000 Design Certification and COL deployment, and management of the plant construction in accordance with the conditions within these approvals, remain as significant site and corporate responsibilities. These licensing-construction integrated activities must now focus on identifying and resolving 'as-built' departures from the standardized design as assessed against the certified AP1000 technical and licensing basis. Within this paper, significant aspects of the AP1000 U.S. licensing will be discussed, including identifying systems and processes used in ensuring compliance while deploying the standardized design. Critical licensing steps, licensing deployment actions as plant construction progresses and defining the road forward to a successful completion of licensing actions will be addressed. (authors)

Jordan, R. P.; Russ, P. A.; Filiak, P. P.; Castiglione, L. L. [Westinghouse Electric Company LLC, 1000 Westinghouse Drive, Cranberry Township, PA 16066 (United States)

2012-07-01T23:59:59.000Z

349

Solar-aware Routing in Wireless Sensor Networks  

E-Print Network [OSTI]

Solar-aware Routing in Wireless Sensor Networks Thiemo Voigt, Hartmut Ritter and Jochen Schiller energy sources such as solar power may provide unlimited energy resources to a changing subset these nodes is appealing. In this paper, we present solar-aware routing, a rout- ing protocol for wireless

350

Dynamic Malware Attack in Energy-Constrained Mobile Wireless Networks  

E-Print Network [OSTI]

Dynamic Malware Attack in Energy-Constrained Mobile Wireless Networks M.H.R. Khouzani, Saswati Sarkar Abstract Large scale proliferation of wireless technologies are dependent on developing reliable to the spread of self-replicating malicious codes known as malware. The malware can be used to initiate

Sarkar, Saswati

351

Stimulating Cooperative Diversity in Wireless Ad Hoc Networks through Pricing  

E-Print Network [OSTI]

Stimulating Cooperative Diversity in Wireless Ad Hoc Networks through Pricing Naveen Shastry in commercial wireless ad hoc networks. For the relay, cooperation represents both a real cost of energy a pricing game that stimulates cooperation via reimbursements to the relay. Specifically, given the price

Adve, Raviraj

352

Sustainability of Self-Configuring Wireless Sensor Bozena Kaminska  

E-Print Network [OSTI]

Sustainability of Self-Configuring Wireless Sensor Networks Bozena Kaminska Simon Fraser University monitoring and security. Those applications impose requirements for sustained, reliable, and fault-tolerant operation. We introduce a new ad-hoc wireless architecture in which forwarding is based on associativity

Gburzynski, Pawel

353

Security Schemes for Wireless Sensor Networks with Mobile Sink  

E-Print Network [OSTI]

........................ 35 10 Wireless sensor network with mobile sinks and sensor nodes using two separate key pools for key pre-distribution ......................................... 39 11 (a) Direct key discovery, (b) Indirect key discovery through interrmedi... Protocol parameter values .......................................................................... 108 1 CHAPTER I INTRODUCTION Mobility is exploited in the field of wireless sensor network [1], [2], [3], [4] to circum- vent multi...

Rasheed, Amar Adnan

2011-08-08T23:59:59.000Z

354

Approximate Minimum-Energy Multicasting in Wireless Ad Hoc Networks  

E-Print Network [OSTI]

and a set of destination nodes, the problem is to build a minimum-energy multicast tree for the requestApproximate Minimum-Energy Multicasting in Wireless Ad Hoc Networks Weifa Liang, Senior Member, IEEE Abstract--A wireless ad hoc network consists of mobile nodes that are equipped with energy

Liang, Weifa

355

A Realistic Power Consumption Model for Wireless Sensor Network Devices  

E-Print Network [OSTI]

. Recent analyses of WSN energy efficiency have been widely based on a sensor node power consumption model1 A Realistic Power Consumption Model for Wireless Sensor Network Devices Qin Wang, Mark Hempstead}@eecs.harvard.edu Abstract-- A realistic power consumption model of wireless communication subsystems typically used in many

Hempstead, Mark

356

Power Management for Wireless Sensor Networks Based on Energy Budgets  

E-Print Network [OSTI]

Power Management for Wireless Sensor Networks Based on Energy Budgets Christian Renner Institute with wireless sensor networks powered by energy-harvesting supplies. We introduce the concept of an energy budget, the amount of energy available to a sensor node for a given period of time. The presented tools

Turau, Volker

357

Energy Efficiency of Encryption Schemes Applied to Wireless Sensor Networks  

E-Print Network [OSTI]

Energy Efficiency of Encryption Schemes Applied to Wireless Sensor Networks Xueying Zhang, Howard M (ICC 2010), Cape Town, South Africa, May 2010, and "Energy Efficiency of Symmetric Key Cryptographic In this paper, we focus on the energy efficiency of secure communication in wireless sensor networks (WSNs). Our

Heys, Howard

358

QoS Support in Multimedia Wireless Environments  

E-Print Network [OSTI]

. Second, new wireless devices such as cellular phones, PDAs, laptops are emerging to assist people population. Fourth, new hardware opportunities are appearing such as multi-frequency energyS-aware and energy-efficient solutions. · The topic of resource management in wireless networks is also very broad

Xue, Yuan

359

Energy Consumption in Coded Queues for Wireless Information Exchange  

E-Print Network [OSTI]

Energy Consumption in Coded Queues for Wireless Information Exchange Jasper Goseling, Richard J customers. We use this relation to ob- tain bounds on the energy consumption in a wireless information, for example, from the observations in [3] that using network coding can reduce the energy consumption

Boucherie, Richard J.

360

Energy-Efficient Capacity Optimization in Wireless Networks  

E-Print Network [OSTI]

Energy-Efficient Capacity Optimization in Wireless Networks Lu Liu, Xianghui Cao, Yu Cheng, Lili Du capacity in the most energy-efficient manner over a general large-scale wireless network, say, a multi numerical results demonstrate the energy efficiency improvement by the proposed energy-efficient

Wang, Yu

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Multihop Wireless Networks: What's Wrong With Min Hopcount?  

E-Print Network [OSTI]

is bimodal ­ Links are either "good", or "bad" · All "good" links are equivalent ­ Sufficient condition for success · What about wireless? #12;Indoor Wireless Network 5th floor 6th floor 802.11b radios (fixed tx

362

Utility Maximization for Delay Constrained QoS in Wireless  

E-Print Network [OSTI]

Utility Maximization for Delay Constrained QoS in Wireless I-Hong Hou CSL and Department of CS of utility maxi- mization for clients with delay based QoS requirements in wireless networks. We adopt that the utility of a client is a function of the timely throughput it obtains. We treat the timely throughput

363

Handover Performance of HVAC Duct Based Indoor Wireless Networks  

E-Print Network [OSTI]

Handover Performance of HVAC Duct Based Indoor Wireless Networks A. E. Xhafa, P. Sonthikorn, and O in indoor wireless net- works (IWN) that use heating, ventilation, and air conditioning (HVAC) ducts.e., new call blocking and handover dropping probabilities, of an IWN that uses HVAC ducts are up to 6

Stancil, Daniel D.

364

Network Electricity Use Associated with Wireless Personal Digital Assistants  

E-Print Network [OSTI]

Network Electricity Use Associated with Wireless Personal Digital Assistants Jonathan Koomey1 the widely cited claim that the network electricity use associated with a wireless personal digital assistant PDA is equal to the electricity consumed by a refrigerator. It compiles estimates of the data flows

Kammen, Daniel M.

365

Voice Quality Evaluation for Wireless Transmission with ROHC (extended version  

E-Print Network [OSTI]

(reduction in header and total packet size), the voice quality, and the delay jitter. Importantly, we employ1 Voice Quality Evaluation for Wireless Transmission with ROHC (extended version and software code encoded voice with ROHC over a wireless link. We first present a tutorial on voice quality evaluation. We

Reisslein, Martin

366

An Integrated System Simulation Approach for Wireless Networked Control Systems  

E-Print Network [OSTI]

Vanderbilt University Nashville, TN, USA Abstract--Cyber-Physical Systems (CPS), such as networked control wireless networks. Accurate modeling of these communication networks is essential in the design and verification of CPS. Controller design needs to take into ac- count the wireless channel characteristics (e

Koutsoukos, Xenofon D.

367

ABHINAV MURALI ACES-205,Multimedia Wireless Networks Lab  

E-Print Network [OSTI]

(GSM) networks Linearly Polarized Micro strip Stacked Patch Antenna for GPS · Designed and fabricated a linearlyABHINAV MURALI ACES-205,Multimedia Wireless Networks Lab Department of Electrical Engineering) EXPERIENCE Multimedia Wireless Networks Lab, IIT Kanpur July,2012 - Present Project Associate · Currently

Jagannatham, Aditya K.

368

Periodic Constraint-Based Control Using Dynamic Wireless Sensor Scheduling  

E-Print Network [OSTI]

Periodic Constraint-Based Control Using Dynamic Wireless Sensor Scheduling James Weimer, Jos´e Ara´ujo, Aitor Hernandez and Karl Henrik Johansson Abstract-- Constraint-based control over wireless sensor net- works (WSNs) require control strategies that achieve a desired closed-loop system performance while

Johansson, Karl Henrik

369

Graphene-enabled Wireless Communication for Massive Multicore Architectures  

E-Print Network [OSTI]

Graphene-enabled Wireless Communication for Massive Multicore Architectures Sergi Abadal, Eduard. This goal is feasible by using graphene-based planar antennas, which can radiate signals at the Terahertz, this is the first work that discusses the utilization of graphene-enabled wireless communication for massive

Cabellos-Aparicio, Albert

370

Graphene-enabled Wireless Networks-on-Chip (Invited Paper)  

E-Print Network [OSTI]

Graphene-enabled Wireless Networks-on-Chip (Invited Paper) Ignacio Llatser, Sergi Abadal, Albert,abadal,amestres,acabello}@ac.upc.edu, eduard.alarcon@upc.edu Abstract--Graphene-enabled Wireless Communications (GWC) advocate for the use of graphene-based plasmonic antennas, or graphennas, which take advantage of the plasmonic properties

Politècnica de Catalunya, Universitat

371

Syncob: Collaborative Time Synchronization in Wireless Sensor Networks  

E-Print Network [OSTI]

an independent power sup- ply like a battery and use methods of energy harvesting like solar cells. To control the limited energy resources efficiently, wireless sensor networks typically undergo pe- riodic sleep-cycles to save energy. To collaborate for a common application, wireless sensor nodes have to be pre- cisely

Beigl, Michael

372

Energy Harvesting in Wireless Communications Communicating with Energy  

E-Print Network [OSTI]

Energy Harvesting in Wireless Communications Communicating with Energy Harvesting Transmitters Tech, utilizing strain Wireless networking with energy harvesting nodes: · Green, self-sufficient nodes, · Extended network lifetime, · Smaller nodes with smaller batteries, · Very limited and varying energy

Smith, Adam D.

373

Dynamic Resource Provisioning for Energy Efficiency in Wireless Access Networks  

E-Print Network [OSTI]

of controlling how much of the network infrastructure is actually needed and which parts can be temporarily. Considering that most of the energy in wireless access networks is consumed in the radio part, a dynamic the two most common wireless access technologies, namely cellular and WLAN. Main features of the proposed

Wichmann, Felix

374

Sensor network based vehicle classification and license plate identification system  

SciTech Connect (OSTI)

Typically, for energy efficiency and scalability purposes, sensor networks have been used in the context of environmental and traffic monitoring applications in which operations at the sensor level are not computationally intensive. But increasingly, sensor network applications require data and compute intensive sensors such video cameras and microphones. In this paper, we describe the design and implementation of two such systems: a vehicle classifier based on acoustic signals and a license plate identification system using a camera. The systems are implemented in an energy-efficient manner to the extent possible using commercially available hardware, the Mica motes and the Stargate platform. Our experience in designing these systems leads us to consider an alternate more flexible, modular, low-power mote architecture that uses a combination of FPGAs, specialized embedded processing units and sensor data acquisition systems.

Frigo, Janette Rose [Los Alamos National Laboratory; Brennan, Sean M [Los Alamos National Laboratory; Rosten, Edward J [Los Alamos National Laboratory; Raby, Eric Y [Los Alamos National Laboratory; Kulathumani, Vinod K [WEST VIRGINIA UNIV.

2009-01-01T23:59:59.000Z

375

International Conference on Microwave and High Frequency Heating Nottingham, UK, September 2013 Underwater Microwave Ignition of  

E-Print Network [OSTI]

-cost operation [4, 5]. Thermite reaction as a self-propagated, high-temperature synthesis (SHS) process, Localized microwave heating, underwater ignition, combustion. INTRODUCTION Self-propagated thermite reactions between metal-oxide and metals typically burn at high flame temperatures, and require high

Jerby, Eli

376

WILEY WIRELESS COMMUNICATIONS AND MOBILE COMPUTING 1 Cognitive Engine Implementation for Wireless  

E-Print Network [OSTI]

radio spectrum [1]­[4]. Cognitive radios encompass all the reconfigurable attributes of a conventional radio systems [2]. Much current cognitive radio development is focused on providing dynamic spectrum access solutions [3], [4], [7], where unlicensed transmissions operate across licensed spectrum while

Kansas, University of

377

Flexible network wireless transceiver and flexible network telemetry transceiver  

DOE Patents [OSTI]

A transceiver for facilitating two-way wireless communication between a baseband application and other nodes in a wireless network, wherein the transceiver provides baseband communication networking and necessary configuration and control functions along with transmitter, receiver, and antenna functions to enable the wireless communication. More specifically, the transceiver provides a long-range wireless duplex communication node or channel between the baseband application, which is associated with a mobile or fixed space, air, water, or ground vehicle or other platform, and other nodes in the wireless network or grid. The transceiver broadly comprises a communication processor; a flexible telemetry transceiver including a receiver and a transmitter; a power conversion and regulation mechanism; a diplexer; and a phased array antenna system, wherein these various components and certain subcomponents thereof may be separately enclosed and distributable relative to the other components and subcomponents.

Brown, Kenneth D. (Grain Valley, MO)

2008-08-05T23:59:59.000Z

378

Microwaves and particle accelerators: a fundamental link  

SciTech Connect (OSTI)

John Cockcroft's splitting of the atom and Ernest Lawrence's invention of the cyclotron in the first half of the twentieth century ushered in the grand era of ever higher energy particle accelerators to probe deeper into matter. It also forged a link, bonding scientific discovery with technological innovation that continues today in the twenty first century. The development of radar and high power vacuum electronics, especially microwave power tubes like the magnetrons and the klystrons in the pre-second world war era, was instrumental in the rapid development of circular and linear charged particle accelerators in the second half of the twentieth century. We had harnessed the powerful microwave radio-frequency sources from few tens of MHz to up to 90 GHz spanning L-band to W-band frequencies. Simultaneously in the second half of the twentieth century, lasers began to offer very first opportunities of controlling charged particles at smaller resolutions on the scale of wavelengths of visible light. We also witnessed in this period the emergence of the photon and neutron sciences driven by accelerators built-by-design producing tailored and ultra-bright pulses of bright photons and neutrons to probe structure and function of matter from aggregate to individual molecular and atomic scales in unexplored territories in material and life sciences. As we enter the twenty first century, the race for ever higher energies, brightness and luminosity to probe atto-metric and atto-second domains of the ultra-small structures and ultra-fast processes continues. These developments depend crucially on yet further advancements in the production and control of high power and high frequency microwaves and light sources, often intricately coupled in their operation to the high energy beams themselves. We give a glimpse of the recent developments and innovations in the electromagnetic production and control of charged particle beams in the service of science and society. (author)

Chattopadhyay, Swapan [Universities of Lancaster, Liverpool and Manchester and Cockcroft Institute, Cheshire (United Kingdom)

2011-07-01T23:59:59.000Z

379

Broadband microwave burst produced by electron beams  

E-Print Network [OSTI]

Theoretical and experimental study of fast electron beams attracts a lot of attention in the astrophysics and laboratory. In the case of solar flares the problem of reliable beam detection and diagnostics is of exceptional importance. This paper explores the fact that the electron beams moving oblique to the magnetic field or along the field with some angular scatter around the beam propagation direction can generate microwave continuum bursts via gyrosynchrotron mechanism. The characteristics of the microwave bursts produced by beams differ from those in case of isotropic or loss-cone distributions, which suggests a new tool for quantitative diagnostics of the beams in the solar corona. To demonstrate the potentiality of this tool, we analyze here a radio burst occurred during an impulsive flare 1B/M6.7 on 10 March 2001 (AR 9368, N27W42). Based on detailed analysis of the spectral, temporal, and spatial relationships, we obtained firm evidence that the microwave continuum burst is produced by electron beams. For the first time we developed and applied a new forward fitting algorithm based on exact gyrosynchrotron formulae and employing both the total power and polarization measurements to solve the inverse problem of the beam diagnostics. We found that the burst is generated by a oblique beam in a region of reasonably strong magnetic field ($\\sim 200-300$ G) and the burst is observed at a quasi-transverse viewing angle. We found that the life time of the emitting electrons in the radio source is relatively short, $\\tau_l \\approx 0.5$ s, consistent with a single reflection of the electrons from a magnetic mirror at the foot point with the stronger magnetic field. We discuss the implications of these findings for the electron acceleration in flares and for beam diagnostics.

A. T. Altyntsev; G. D. Fleishman; G. -L. Huang; V. F. Melnikov

2007-12-16T23:59:59.000Z

380

Microwave sintering of single plate-shaped articles  

DOE Patents [OSTI]

Apparatus and method are disclosed for high temperature sintering of plate-shaped articles of alumina, magnesia, silica, yttria, zirconia, and mixtures thereof using microwave radiation. An article is placed within a sintering structure located within a sintering container which is placed in a microwave cavity for heating. The rates at which heating and cooling take place is controlled. 2 figs.

Katz, J.D.; Blake, R.D.

1995-07-11T23:59:59.000Z

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Noise properties of mutually sustained microwave-optoelectronic oscillator pair  

E-Print Network [OSTI]

Noise properties of mutually sustained microwave-optoelectronic oscillator pair E. Shumakher and G microwave-optoelectronic oscillator pair are described. The two oscillators have different spectral purities and exhibits low phase noise and highly suppressed spurious modes. Optoelectronic oscillators are employed

Eisenstein, Gadi

382

Tailoring The Microwave Permittivity And Permeability Of Composite Materials  

E-Print Network [OSTI]

1 Tailoring The Microwave Permittivity And Permeability Of Composite Materials Kenneth M. Bober/Lowell, Lowell, MA 01854 ABSTRACT The microwave permittivity( r ) and permeability( r ) of composite materials. Polynomials are also used for the ferrite composites because it was determined that the MG theory was unable

Massachusetts at Lowell, University of

383

Microwave sintering of sol-gel derived abrasive grain  

DOE Patents [OSTI]

A method is provided for making microwave-sintered, free flowing alpha alumina-based ceramic abrasive grain, under conditions effective to couple microwaves with calcined alpha alumina-based abrasive gain precursor and sinter it at a temperature of at least about 1150.degree. C.

Plovnick, Ross (St. Louis Park, MN); Celikkaya, Ahmet (Woodbury, MN); Blake, Rodger D. (Tuscon, AZ)

1997-01-01T23:59:59.000Z

384

MICROWAVE-BASED NDE OF FRP-JACKETED CONCRETE STRUCTURES  

E-Print Network [OSTI]

MICROWAVE-BASED NDE OF FRP-JACKETED CONCRETE STRUCTURES Yoo Jin Kim, Franco De Flaviis University are presented in this paper. KEY WORDS: Microwave, Non-Destructive Evaluation (NDE), FRP Jacket, Imaging Technol not be visually observed. Various nondestructive evaluation (NDE) techniques have been studied to detect cracks

De Flaviis, Franco

385

Improving performance of transmission control protocol (TCP) over mobile wireless networks  

E-Print Network [OSTI]

) August 1996 Major Subject: Computer Science ABSTRACT Improving Performance of Transmission Control Protocol (TCP) over Mobile Wireless Networks. (August 1996) Bikram Singli Balrshi, B. Tech. , Delhi Institute of Technology Chair of Advisory.... Explicit Bad State Notification (EBSN) . d. EBSN in Local-Area Wireless Networks . D. Results and Discussion 1. Wide-Area Wireless Networks . 2. Local-Area Wireless Networks SEAMLESS COMMUNICATION IN MOBILE WIRELESS NETWORKS A. Summary of Previous...

Bakshi, Bikram Singh

1996-01-01T23:59:59.000Z

386

Selected applications of microwave radiometric techniques  

E-Print Network [OSTI]

Measurements at 31. 4 GHz of an Oil Film on a Water Surface 75 80 93 96 97 114 122 126 127 132 LIST OF FIGURES ~Fi ure ~Pa e III-1 Laboratory measurements of the dielectric properties of moist sand 24 III-2 III-3 III-4 Effects of increasing.... Based on the characteristic of all bodies to radiate electromagnetic energy at a rate depen- dent upon their temperature, surface structure, and elec- tromagnetic properties, the microwave radiometer provides an all-weather, day-night means...

Jean, Buford Randall

1971-01-01T23:59:59.000Z

387

Microwave photonics with Josephson junction arrays  

E-Print Network [OSTI]

We introduce an architecture for a photonic crystal in the microwave regime based on superconducting transmission lines interrupted by Josephson junctions. A study of the scattering properties of a single junction in the line shows that the junction behaves as a perfect mirror when the photon frequency matches the Josephson plasma frequency. We generalize our calculations to periodic arrangements of junctions, demonstrating that they can be used for tunable band engineering, forming what we call a quantum circuit crystal. As a relevant application, we discuss the creation of stationary entanglement between two superconducting qubits interacting through a disordered media.

Zueco, David; Solano, Enrique; García-Ripoll, Juan José

2011-01-01T23:59:59.000Z

388

New physics from the Cosmic Microwave Background  

E-Print Network [OSTI]

I review the present status of the Cosmic Microwave Background, with some emphasis on the current and future implications for particle physics. Conclusions are: gravitational instability in a dark matter dominated universe grew today's structure; the Universe remained neutral until z<~50; the CMB power spectrum peaks at 150<~l<~350; the large-scale structure of spacetime appears to be simple; something like inflation is something like proven; we will learn a great deal about cosmology, astrophysics and particle physics from MAP and Planck.

Douglas Scott

1999-11-17T23:59:59.000Z

389

Cosmic Microwave Background Tests of Inflation  

E-Print Network [OSTI]

Inflation provides a unified paradigm for understanding the isotropy of the cosmic microwave background (CMB), the flatness problem, and the origin of large-scale structure. Although the physics responsible for inflation is not yet well understood, slow-roll inflation generically makes several predictions: a flat Universe, primordial adiabatic density perturbations, and a stochastic gravity-wave background. Inflation further predicts specific relations between the amplitudes and shapes of the spectrum of density perturbations and gravity waves. There are now excellent prospects for testing precisely these predictions with forthcoming CMB temperature and polarization maps. Here I discuss these new CMB tests of inflation.

Marc Kamionkowski

1998-03-14T23:59:59.000Z

390

ARM - Field Campaign - Microwave Radiometer Profiler Evaluation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD) by Microtops Atmospheric Optical Depth (AOD) by Microtops ARM Data DiscoverygovCampaignsMicrowave

391

Ground-based Microwave Cloud Tomography  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFun with Big Sky LearningGetGraphene's 3DRise |EnergyVehiclesMeasurementMicrowave

392

A Taxonomy of Wireless Micro-Sensor Network Models Sameer Tilak Nael B. Abu-Ghazaleh Wendi Heinzelman  

E-Print Network [OSTI]

A Taxonomy of Wireless Micro-Sensor Network Models £ Sameer Tilak Nael B. Abu-Ghazaleh Wendi wireless networks. This paper examines this emerging field to clas- sify wireless micro-sensor networks to classify wireless micro-sensor networks. In partic- ular, we classify the aspects of wireless micro

Han, Richard Y.

393

Atomic Safety and Licensing Board Panel Biennial Report, Fiscal Years 1993--1994. Volume 6  

SciTech Connect (OSTI)

In Fiscal Year 1993, the Atomic Safety and Licensing Board Panel (``the Panel``) handled 30 proceedings. In Fiscal Year 1994, the Panel handled 36 proceedings. The cases addressed issues in the construction, operation, and maintenance of commercial nuclear power reactors and other activities requiring a license form the Nuclear Regulatory Commission. This report sets out the Panel`s caseload during the year and summarizes, highlight, and analyzes how the wide- ranging issues raised in those proceedings were addressed by the Panel`s judges and licensing boards.

NONE

1995-08-01T23:59:59.000Z

394

Manipulating microwaves with magnetic-dipolar-mode vortices  

SciTech Connect (OSTI)

There has been a surge of interest in the subwavelength confinement of electromagnetic fields. It is well known that, in optics, subwavelength confinement can be obtained from surface plasmon (quasielectrostatic) oscillations. In this article, we propose to realize subwavelength confinement in microwaves by using dipolar-mode (quasimagnetostatic) magnon oscillations in ferrite particles. Our studies of interactions between microwave electromagnetic fields and small ferrite particles with magnetic-dipolar-mode (MDM) oscillations show strong localization of electromagnetic energy. MDM oscillations in a ferrite disk are at the origin of topological singularities resulting in Poynting vector vortices and symmetry breakings of the microwave near fields. We show that new subwavelength microwave structures can be realized based on a system of interacting MDM ferrite disks. Wave propagation of electromagnetic signals in such structures is characterized by topological phase variations. Interactions of microwave fields with an MDM ferrite disk and MDM-disk arrays open a perspective for creating engineered electromagnetic fields with unique symmetry properties.

Kamenetskii, E. O.; Sigalov, M.; Shavit, R. [Department of Electrical and Computer Engineering, Ben Gurion University of the Negev, IL-84 105 Beer Sheva (Israel)

2010-05-15T23:59:59.000Z

395

Mobile system for microwave removal of concrete surfaces  

DOE Patents [OSTI]

A method and apparatus are disclosed for the microwave removal of contaminated concrete surfaces. The apparatus comprises a housing adapted to pass over a support surface. The housing includes a waveguide for directing microwave energy to the surface at an angle maximizing absorption of microwave energy by the surface. The apparatus is further provided with a source of microwave energy operably associated with the waveguide, wherein the microwave energy has a frequency of between about 10.6 GHz and about 24 GHz and acts to remove the uppermost layer from the surface. The apparatus further includes a debris containment assembly comprising a vacuum assembly operably associated with the housing. The vacuum assembly is adapted to remove debris from the area adjacent the surface. 7 figs.

White, T.L.; Bigelow, T.S.; Schaich, C.R.; Foster, D. Jr.

1997-06-03T23:59:59.000Z

396

Mobile system for microwave removal of concrete surfaces  

DOE Patents [OSTI]

A method and apparatus for the microwave removal of contaminated concrete surfaces. The apparatus comprises a housing adapted to pass over a support surface. The housing includes a waveguide for directing microwave energy to the surface at an angle maximizing absorption of microwave energy by the surface. The apparatus is further provided with a source of microwave energy operably associated with the waveguide, wherein the microwave energy has a frequency of between about 10.6 GHz and about 24 GHz and acts to remove the uppermost layer from the surface. The apparatus further includes a debris containment assembly comprising a vacuum assembly operably associated with the housing. The vacuum assembly is adapted to remove debris from the area adjacent the surface.

White, Terry L. (Oak Ridge, TN); Bigelow, Timothy S. (Knoxville, TN); Schaich, Charles R. (Lenoir City, TN); Foster, Jr., Don (Knoxville, TN)

1997-01-01T23:59:59.000Z

397

Wireless zoned particulate matter filter regeneration control system  

DOE Patents [OSTI]

An assembly includes a particulate matter (PM) filter that comprises an upstream end for receiving exhaust gas, a downstream end and multiple zones. An absorbing layer absorbs microwave energy in one of N frequency ranges and is arranged with the upstream end. N is an integer. A frequency selective filter has M frequency selective segments and receives microwave energy in the N frequency ranges. M is an integer. One of the M frequency selective segments permits passage of the microwave energy in one of the N frequency ranges and does not permit passage of microwave energy in the other of the N frequency ranges.

Gonze, Eugene V [Pinckney, MI; Kirby, Kevin W [Calabasas Hills, CA; Phelps, Amanda [Malibu, CA

2011-10-04T23:59:59.000Z

398

Microwaves, hyperthermia, and human leukocyte function  

SciTech Connect (OSTI)

The objective of this study is to determine whether exposure to microwaves (2450 MHz) affects the function of human leukocytes in the resting state and during antigenic or mitogenic challenge. This publication is a summary report of the construction and calibration of a waveguide exposure facility for in vitro irradiation of human leukocytes. Calorimetric determinations of specific absorption rates (SAR) were made using heating curves measured with a microwave transparent Vitek 101 Electrothermia Monitor. The correlation between SAR and forward power was highly significant (r=0.95). At a forward power of 0.55 W the average SAR was approximately 33 mW/ml. However, inhomogeneity and significant resonance absorption were noted in the dual vial waveguide exposure facility. A 30-point measurement of SAR distribution revealed that the SAR at any of the measured points could range between 0.12- and 3.94-fold of the average SAR within the given vial. Measurements indicated that this variability in SAR values did not create significant thermal gradients within the vials when external agitation was applied.

Roberts, N.J. Jr; Lu, S.; Michaelson, S.M.

1981-05-01T23:59:59.000Z

399

Pattern formation and propagation during microwave breakdown  

SciTech Connect (OSTI)

During microwave breakdown at atmospheric pressure, a sharp plasma front forms and propagates toward the microwave source at high velocities. Experiments show that the plasma front may exhibit a complex dynamical structure or pattern composed of plasma filaments aligned with the wave electric field and apparently moving toward the source. In this paper, we present a model of the pattern formation and propagation under conditions close to recent experiments. Maxwell's equations are solved together with plasma fluid equations in two dimensions to describe the space and time evolution of the wave field and plasma density. The simulation results are in excellent agreement with the experimental observations. The model provides a physical interpretation of the pattern formation and dynamics in terms of ionization-diffusion and absorption-reflection mechanisms. The simulations allow a good qualitative and quantitative understanding of different features such as plasma front velocity, spacing between filaments, maximum plasma density in the filaments, and influence of the discharge parameters on the development of well-defined filamentary plasma arrays or more diffuse plasma fronts.

Chaudhury, Bhaskar [Laboratoire Plasma et Conversion d'Energie (LAPLACE), INPT, UPS, Universite de Toulouse, 118 route de Narbonne, F-31062 Toulouse Cedex 9 (France); Boeuf, Jean-Pierre [Laboratoire Plasma et Conversion d'Energie (LAPLACE), INPT, UPS, Universite de Toulouse, 118 route de Narbonne, F-31062 Toulouse Cedex 9 (France); LAPLACE, CNRS, F-31062 Toulouse (France); Zhu, Guo Qiang [Laboratoire Plasma et Conversion d'Energie (LAPLACE), INPT, UPS, Universite de Toulouse, 118 route de Narbonne, F-31062 Toulouse Cedex 9 (France); Northwestern Polytechnique University, Xi'an 710072 (China)

2010-12-15T23:59:59.000Z

400

Passive wireless sensing tags NASA inflatable structures.  

SciTech Connect (OSTI)

This report gives a description of several types of wireless, unpowered remote sensors. Surface acoustic wave (SAW) devices were coupled with conventional sensors to create entirely new types of sensors. These sensors report physically measurable data in the same manner as the conventional sensors, but they do it remotely and without any local power source. The sensors are measured remotely using a radar-like interrogation device, and the sensors and their related communication electronics draw all of the power needed for communicating from the radar pulse. The report covers only a description of prototype sensors and not of the manufacturing requirements of these devices.

Brocato, Robert Wesley

2006-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Atomic Energy and Radioactive Substances: Licensing and Regulation of Sites: The Nuclear Installations Regulations, 1962   

E-Print Network [OSTI]

These regulations, made by the Minister of Power and the Secretary of State for Scotland acting jointly, prescribe for the purpose of subsection (1)(b) of section one of the Nuclear Installations (Licensing and Insurance) Act, 1959, certain classes...

Wood, Richard; Maclay, John. S.

1962-01-01T23:59:59.000Z

402

Better Lucky Than Rich? Welfare Analysis of Automobile License Allocations in Beijing and Shanghai  

E-Print Network [OSTI]

Better Lucky Than Rich? Welfare Analysis of Automobile License Allocations in Beijing and Shanghai externalities from automobile use than a uniform price auction, the advantage is offset by the significant automobile sales in China grew from 2.4 millio

Schweik, Charles M.

403

Licensing and Deployment of Advanced Reactors Andrew C. Kadak, Ph.D.  

E-Print Network [OSTI]

of advanced reactors of the type proposed for Generation IV will require a new strategy for licensing since many of the proposed Generation IV technologies include concepts such as high temperature gas

404

NSNFP Activities in Support of Repository Licensing for Disposal of DOE SNF  

SciTech Connect (OSTI)

The U.S. Department of Energy (DOE) Office of Civilian Radioactive Waste Management is in the process of preparing the Yucca Mountain license application for submission to the Nuclear Regulatory Commission as the nation’s first geologic repository for spent nuclear fuel (SNF) and high-level waste. Because the DOE SNF will be part of the license application, there are various components of the license application that will require information relative to the DOE SNF. The National Spent Nuclear Fuel Program (NSNFP) is the organization that directs the research, development, and testing of treatment, shipment, and disposal technologies for all DOE SNF. This report documents the work activities conducted by the NSNFP and discusses the relationship between these NSNFP technical activities and the license application. A number of the NSNFP activities were performed to provide risk insights and understanding of DOE SNF disposal as well as to prepare for anticipated questions from the regulatory agency.

Henry H. Loo; Brett W.. Carlsen; Sheryl L. Morton; Larry L. Taylor; Gregg W. Wachs

2004-09-01T23:59:59.000Z

405

Pricing and licensing of software products and services : a study on industry trends  

E-Print Network [OSTI]

The software product business reached the $150 billion mark at the end of 2005. The pricing and licensing of new products, maintenance services, services and service maintenance have become an important strategy to deliver ...

Nayak, Shivashis

2006-01-01T23:59:59.000Z

406

Microsoft PowerPoint - Module 4 - HTGR Licensing - final.ppt...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

t i i ti d i * Complements traditional deterministic design approach and defense-in-depth philosophy to increase use of risk insights in design and licensing g g g decisions to the...

407

Burnup Credit Approach Used in the Yucca Mountain License Application  

SciTech Connect (OSTI)

The United States Department of Energy has submitted a license application (LA) for construction authorization of a deep geologic repository at Yucca Mountain, Nevada. The license application is currently under review by the United States Nuclear Regulatory Commission (NRC). This paper will describe the methodology and approach used in the LA to address the issue of criticality and the role of burnup credit during the postclosure period. The most significant and effective measures for prevention of criticality in the repository include multiple redundant barriers that act to isolate fissionable material from water (which can act as a moderator, corrosive agent, and transporter of fissile material); inherent geometry of waste package internals and waste forms; presence of fixed neutron absorbers in waste package internals; and fuel burnup for commercial spent nuclear fuel. A probabilistic approach has been used to screen criticality from the total system performance assessment. Within the probabilistic approach, criticality is considered an event, and the total probability of a criticality event occurring within 10,000 years of disposal is calculated and compared against the regulatory criterion. The total probability of criticality includes contributions associated with both internal (within waste packages) and external (external to waste packages) criticality for each of the initiating events that could lead to waste package breach. The occurrence of and conditions necessary for criticality in the repository have been thoroughly evaluated using a comprehensive range of parameter distributions. A simplified design-basis modeling approach has been used to evaluate the probability of criticality by using numerous significant and conservative assumptions. Burnup credit is used only for evaluations of in-package configurations and uses a combination of conservative and bounding modeling approximations to ensure conservatism. This paper will review the NRC regulatory criteria relevant to postclosure criticality, explain the role of criticality within the overall repository performance assessment, describe the strategy for preventing criticality via design features and waste form properties, and discuss the numerous considerations relevant to criticality and burnup credit for spent nuclear fuel disposed of in a geologic repository, with emphasis on the burnup credit approach and analyses.

Scaglione, John M [ORNL] [ORNL; Wagner, John C [ORNL] [ORNL

2010-01-01T23:59:59.000Z

408

Model and Analytic Processes for Export License Assessments  

SciTech Connect (OSTI)

This paper represents the Department of Energy Office of Nonproliferation Research and Development (NA-22) Simulations, Algorithms and Modeling (SAM) Program's first effort to identify and frame analytical methods and tools to aid export control professionals in effectively predicting proliferation intent; a complex, multi-step and multi-agency process. The report focuses on analytical modeling methodologies that alone, or combined, may improve the proliferation export control license approval process. It is a follow-up to an earlier paper describing information sources and environments related to international nuclear technology transfer. This report describes the decision criteria used to evaluate modeling techniques and tools to determine which approaches will be investigated during the final 2 years of the project. The report also details the motivation for why new modeling techniques and tools are needed. The analytical modeling methodologies will enable analysts to evaluate the information environment for relevance to detecting proliferation intent, with specific focus on assessing risks associated with transferring dual-use technologies. Dual-use technologies can be used in both weapons and commercial enterprises. A decision-framework was developed to evaluate which of the different analytical modeling methodologies would be most appropriate conditional on the uniqueness of the approach, data availability, laboratory capabilities, relevance to NA-22 and Office of Arms Control and Nonproliferation (NA-24) research needs and the impact if successful. Modeling methodologies were divided into whether they could help micro-level assessments (e.g., help improve individual license assessments) or macro-level assessment. Macro-level assessment focuses on suppliers, technology, consumers, economies, and proliferation context. Macro-level assessment technologies scored higher in the area of uniqueness because less work has been done at the macro level. An approach to developing testable hypotheses for the macro-level assessment methodologies is provided. The outcome of this works suggests that we should develop a Bayes Net for micro-level analysis and continue to focus on Bayes Net, System Dynamics and Economic Input/Output models for assessing macro-level problems. Simultaneously, we need to develop metrics for assessing intent in export control, including the risks and consequences associated with all aspects of export control.

Thompson, Sandra E.; Whitney, Paul D.; Weimar, Mark R.; Wood, Thomas W.; Daly, Don S.; Brothers, Alan J.; Sanfilippo, Antonio P.; Cook, Diane; Holder, Larry

2011-09-29T23:59:59.000Z

409

ARM: Microwave Radiometer data (MWR Profiles - QME), water vapor, temp, cloud liquid water, precip water retrievals  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Microwave Radiometer data (MWR Profiles - QME), water vapor, temp, cloud liquid water, precip water retrievals

Cadeddu, Maria

410

Analysis and control of the thermal runaway of ceramic slab under microwave heating  

E-Print Network [OSTI]

Analysis and control of the thermal runaway of ceramic slab under microwave heating Changjun Liu of the dielectrics during microwave heating, in which there is a big jump of the steady-state temperature while the applied microwave power varies slightly. It hinders engineers in the applications of microwave heating

Sheen, Dongwoo

411

Ultrafast Microwave Hydrothermal Synthesis of BiFeO3 Nanoplates Riad Nechache,  

E-Print Network [OSTI]

hydrothermal processes while requiring significantly less time and energy. In addition, we show that microwaveUltrafast Microwave Hydrothermal Synthesis of BiFeO3 Nanoplates Shun Li, Riad Nechache,§ Ivan and very rapid (1­2 min) microwave-assisted hydrothermal approach. We show that the microwave treatment

412

A hierarchical structure of neural network implemented for the recognition of automobile license plate number  

E-Print Network [OSTI]

A HIERARCHICAL STRUCTURE OF NEURAL NETWORK IMPLEMENTED FOR THE RECOGNITION OF AUTOMOBILE LICENSE PLATE NURSER A Thesis by JOONGHO CHANG Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfdlment... of the requirements for the degree of MASTER OF SCIENCE August 1994 Major Subject: Electrical Engineering A HIERARCHICAL STRUCTURE OF NEURAL NETWORK IMPLEMENTED FOR THE RECOGNITION OF AUTOMOBILE LICENSE PLATE NUMBER A Thesis by JOONGHO CHANG Submitted...

Chang, Joongho

1994-01-01T23:59:59.000Z

413

Proceedings: Decommissioning--License Termination Plans and Final Site Release Workshop  

SciTech Connect (OSTI)

This report presents the proceedings of an EPRI workshop dealing with the subject of decommissioning license termination and final site release. The workshop was the ninth in a series designed to aid utility personnel in assessing technologies for decommissioning nuclear power plants. It focused on specific aspects of license termination activities and final site release as they relate to nuclear plant decommissioning. The information presented will help utilities control decommissioning costs by selecting the best practices and technologies

None

2004-03-01T23:59:59.000Z

414

Portable microwave instrument for non-destructive evaluation of structural characteristics  

DOE Patents [OSTI]

A portable microwave instrument for evaluating characteristics of a structural member includes a source of microwave energy, a transmitter coupled to the source of microwave energy for transmitting a microwave signal at the structural member, and a receiver positioned on the same side of the structural member as the transmitter and being disposed to receive a microwave signal reflected by the structural member. A phase angle difference is determined between the transmitted microwave signal and the received microwave signal using a signal splitter and a balanced mixer. The difference in phase angle varies in accordance with differences in size, shape and locations of constituent materials within the structural member.

Bible, Don W. (Clinton, TN); Crutcher, Richard I. (Knoxville, TN); Sohns, Carl W. (Oak Ridge, TN); Maddox, Stephen R. (Loudon, TN)

1995-01-01T23:59:59.000Z

415

Portable microwave instrument for non-destructive evaluation of structural characteristics  

DOE Patents [OSTI]

A portable microwave instrument for evaluating characteristics of a structural member includes a source of microwave energy, a transmitter coupled to the source of microwave energy for transmitting a microwave signal at the structural member, and a receiver positioned on the same side of the structural member as the transmitter and being disposed to receive a microwave signal reflected by the structural member. A phase angle difference is determined between the transmitted microwave signal and the received microwave signal using a signal splitter and a balanced mixer. The difference in phase angle varies in accordance with differences in size, shape and locations of constituent materials within the structural member. 6 figures.

Bible, D.W.; Crutcher, R.I.; Sohns, C.W.; Maddox, S.R.

1995-01-24T23:59:59.000Z

416

1st Workshop on Dependability Issues in Wireless Ad Hoc Networks and Sensor Networks (DIWANS'04), Florence, Italy, Fault Tolerant Communication Topologies for Wireless Ad Hoc Networks  

E-Print Network [OSTI]

1st Workshop on Dependability Issues in Wireless Ad Hoc Networks and Sensor Networks (DIWANS'04), Florence, Italy, June 2004 Fault Tolerant Communication Topologies for Wireless Ad Hoc Networks Bernd, distributed algorithms, failure locality 1 Introduction Wireless sensor networks, mobile ad hoc networks

417

Sodium fast reactor safety and licensing research plan. Volume II.  

SciTech Connect (OSTI)

Expert panels comprised of subject matter experts identified at the U.S. National Laboratories (SNL, ANL, INL, ORNL, LBL, and BNL), universities (University of Wisconsin and Ohio State University), international agencies (IRSN, CEA, JAEA, KAERI, and JRC-IE) and private consultation companies (Radiation Effects Consulting) were assembled to perform a gap analysis for sodium fast reactor licensing. Expert-opinion elicitation was performed to qualitatively assess the current state of sodium fast reactor technologies. Five independent gap analyses were performed resulting in the following topical reports: (1) Accident Initiators and Sequences (i.e., Initiators/Sequences Technology Gap Analysis), (2) Sodium Technology Phenomena (i.e., Advanced Burner Reactor Sodium Technology Gap Analysis), (3) Fuels and Materials (i.e., Sodium Fast Reactor Fuels and Materials: Research Needs), (4) Source Term Characterization (i.e., Advanced Sodium Fast Reactor Accident Source Terms: Research Needs), and (5) Computer Codes and Models (i.e., Sodium Fast Reactor Gaps Analysis of Computer Codes and Models for Accident Analysis and Reactor Safety). Volume II of the Sodium Research Plan consolidates the five gap analysis reports produced by each expert panel, wherein the importance of the identified phenomena and necessities of further experimental research and code development were addressed. The findings from these five reports comprised the basis for the analysis in Sodium Fast Reactor Research Plan Volume I.

Ludewig, H. (Brokhaven National Laboratory, Upton, NY); Powers, D. A.; Hewson, John C.; LaChance, Jeffrey L.; Wright, A. (Argonne National Laboratory, Argonne, IL); Phillips, J.; Zeyen, R. (Institute for Energy Petten, Saint-Paul-lez-Durance, France); Clement, B. (IRSN/DPAM.SEMIC Bt 702, Saint-Paul-lez-Durance, France); Garner, Frank (Radiation Effects Consulting, Richland, WA); Walters, Leon (Advanced Reactor Concepts, Los Alamos, NM); Wright, Steve; Ott, Larry J. (Oak Ridge National Laboratory, Oak Ridge, TN); Suo-Anttila, Ahti Jorma; Denning, Richard (Ohio State University, Columbus, OH); Ohshima, Hiroyuki (Japan Atomic Energy Agency, Ibaraki, Japan); Ohno, S. (Japan Atomic Energy Agency, Ibaraki, Japan); Miyhara, S. (Japan Atomic Energy Agency, Ibaraki, Japan); Yacout, Abdellatif (Argonne National Laboratory, Argonne, IL); Farmer, M. (Argonne National Laboratory, Argonne, IL); Wade, D. (Argonne National Laboratory, Argonne, IL); Grandy, C. (Argonne National Laboratory, Argonne, IL); Schmidt, R.; Cahalen, J. (Argonne National Laboratory, Argonne, IL); Olivier, Tara Jean; Budnitz, R. (Lawrence Berkeley National Laboratory, Berkeley, CA); Tobita, Yoshiharu (Japan Atomic Energy Agency, Ibaraki, Japan); Serre, Frederic (Centre d'%C3%94etudes nucl%C3%94eaires de Cadarache, Cea, France); Natesan, Ken (Argonne National Laboratory, Argonne, IL); Carbajo, Juan J. (Oak Ridge National Laboratory, Oak Ridge, TN); Jeong, Hae-Yong (Korea Atomic Energy Research Institute, Daejeon, Korea); Wigeland, Roald (Idaho National Laboratory, Idaho Falls, ID); Corradini, Michael (University of Wisconsin-Madison, Madison, WI); Thomas, Justin (Argonne National Laboratory, Argonne, IL); Wei, Tom (Argonne National Laboratory, Argonne, IL); Sofu, Tanju (Argonne National Laboratory, Argonne, IL); Flanagan, George F. (Oak Ridge National Laboratory, Oak Ridge, TN); Bari, R. (Brokhaven National Laboratory, Upton, NY); Porter D. (Idaho National Laboratory, Idaho Falls, ID); Lambert, J. (Argonne National Laboratory, Argonne, IL); Hayes, S. (Idaho National Laboratory, Idaho Falls, ID); Sackett, J. (Idaho National Laboratory, Idaho Falls, ID); Denman, Matthew R.

2012-05-01T23:59:59.000Z

418

Electrical detection of microwave assisted magnetization reversal by spin pumping  

SciTech Connect (OSTI)

Microwave assisted magnetization reversal has been investigated in a bilayer system of Pt/ferromagnet by detecting a change in the polarity of the spin pumping signal. The reversal process is studied in two material systems, Pt/CoFeB and Pt/NiFe, for different aspect ratios. The onset of the switching behavior is indicated by a sharp transition in the spin pumping voltage. At a threshold value of the external field, the switching process changes from partial to full reversal with increasing microwave power. The proposed method provides a simple way to detect microwave assisted magnetization reversal.

Rao, Siddharth; Subhra Mukherjee, Sankha; Elyasi, Mehrdad; Singh Bhatia, Charanjit; Yang, Hyunsoo, E-mail: eleyang@nus.edu.sg [Department of Electrical and Computer Engineering and NUSNNI, National University of Singapore, Singapore 117576 (Singapore)

2014-03-24T23:59:59.000Z

419

Method and apparatus for component separation using microwave energy  

DOE Patents [OSTI]

A method for separating and recovering components includes the steps of providing at least a first component bonded to a second component by a microwave absorbent adhesive bonding material at a bonding area to form an assembly, the bonding material disposed between the components. Microwave energy is directly and selectively applied to the assembly so that substantially only the bonding material absorbs the microwave energy until the bonding material is at a debonding state. A separation force is applied while the bonding material is at the debonding state to permit disengaging and recovering the components. In addition, an apparatus for practicing the method includes holders for the components.

Morrow, Marvin S. (Kingston, TN); Schechter, Donald E. (Ten Mile, TN); Calhoun, Jr., Clyde L. (Knoxville, TN)

2001-04-03T23:59:59.000Z

420

2D microwave imaging reflectometer electronics  

SciTech Connect (OSTI)

A 2D microwave imaging reflectometer system has been developed to visualize electron density fluctuations on the DIII-D tokamak. Simultaneously illuminated at four probe frequencies, large aperture optics image reflections from four density-dependent cutoff surfaces in the plasma over an extended region of the DIII-D plasma. Localized density fluctuations in the vicinity of the plasma cutoff surfaces modulate the plasma reflections, yielding a 2D image of electron density fluctuations. Details are presented of the receiver down conversion electronics that generate the in-phase (I) and quadrature (Q) reflectometer signals from which 2D density fluctuation data are obtained. Also presented are details on the control system and backplane used to manage the electronics as well as an introduction to the computer based control program.

Spear, A. G.; Domier, C. W., E-mail: cwdomier@ucdavis.edu; Hu, X.; Muscatello, C. M.; Ren, X.; Luhmann, N. C. [Electrical and Computer Engineering, University of California, Davis, California 95616 (United States); Tobias, B. J. [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543 (United States)

2014-11-15T23:59:59.000Z

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Quantum chaotic scattering in microwave resonators  

SciTech Connect (OSTI)

In a frequency range where a microwave resonator simulates a chaotic quantum billiard, we have measured moduli and phases of reflection and transmission amplitudes in the regimes of both isolated and of weakly overlapping resonances and for resonators with and without time-reversal invariance. Statistical measures for S-matrix fluctuations were determined from the data and compared with extant and/or newly derived theoretical results obtained from the random-matrix approach to quantum chaotic scattering. The latter contained a small number of fit parameters. The large data sets taken made it possible to test the theoretical expressions with unprecedented accuracy. The theory is confirmed by both a goodness-of-fit-test and the agreement of predicted values for those statistical measures that were not used for the fits, with the data.

Dietz, B.; Miski-Oglu, M.; Schaefer, F. [Institut fuer Kernphysik, Technische Universitaet Darmstadt, D-64289 Darmstadt (Germany); Friedrich, T. [Institut fuer Kernphysik, Technische Universitaet Darmstadt, D-64289 Darmstadt (Germany); GSI Helmholzzentrum fuer Schwerionenforschung GmbH, D-64291 Darmstadt (Germany); Harney, H. L.; Weidenmueller, H. A. [Max-Planck-Institut fuer Kernphysik, D-69029 Heidelberg (Germany); Richter, A. [Institut fuer Kernphysik, Technische Universitaet Darmstadt, D-64289 Darmstadt (Germany); ECT, Villa Tambosi, I-38100 Villazzano (Trento) (Italy)

2010-03-15T23:59:59.000Z

422

Anisotropies in the Cosmic Microwave Background: Theory  

E-Print Network [OSTI]

Anisotropies in the Cosmic Microwave Background (CMB) contain a wealth of information about the past history of the universe and the present values of cosmological parameters. I ouline some of the theoretical advances of the last few years. In particular, I emphasize that for a wide class of cosmological models, theorists can accurately calculate the spectrum to better than a percent. The specturm of anisotropies today is directly related to the pattern of inhomogeneities present at the time of recombination. This recognition leads to a powerful argument that will enable us to distinguish inflationary models from other models of structure formation. If the inflationary models turn out to be correct, the free parameters in these models will be determined to unprecedented accuracy by the upcoming satellite missions.

Scott Dodelson

1997-02-14T23:59:59.000Z

423

The Cosmic Microwave Background and Particle Physics  

E-Print Network [OSTI]

In forthcoming years, connections between cosmology and particle physics will be made increasingly important with the advent of a new generation of cosmic microwave background (CMB) experiments. Here, we review a number of these links. Our primary focus is on new CMB tests of inflation. We explain how the inflationary predictions for the geometry of the Universe and primordial density perturbations will be tested by CMB temperature fluctuations, and how the gravitational waves predicted by inflation can be pursued with the CMB polarization. The CMB signatures of topological defects and primordial magnetic fields from cosmological phase transitions are also discussed. Furthermore, we review current and future CMB constraints on various types of dark matter (e.g. massive neutrinos, weakly interacting massive particles, axions, vacuum energy), decaying particles, the baryon asymmetry of the Universe, ultra-high-energy cosmic rays, exotic cosmological topologies, and other new physics.

Marc Kamionkowski; Arthur Kosowsky

1999-04-09T23:59:59.000Z

424

Compact microwave ion source for industrial applications  

SciTech Connect (OSTI)

A 2.45 GHz microwave ion source for ion implanters has many good properties for industrial application, such as easy maintenance and long lifetime, and it should be compact for budget and space. But, it has a dc current supply for the solenoid and a rf generator for plasma generation. Usually, they are located on high voltage platform because they are electrically connected with beam extraction power supply. Using permanent magnet solenoid and multi-layer dc break, high voltage deck and high voltage isolation transformer can be eliminated, and the dose rate on targets can be controlled by pulse duty control with semiconductor high voltage switch. Because the beam optics does not change, beam transfer components, such as focusing elements and beam shutter, can be eliminated. It has shown the good performances in budget and space for industrial applications of ion beams.

Cho, Yong-Sub; Kim, Dae-Il; Kim, Han-Sung; Seol, Kyung-Tae; Kwon, Hyeok-Jung; Hong, In-Seok [Proton Engineering Frontier Project, Korea Atomic Energy Research Institute, Daejeon 305-353 (Korea, Republic of)

2012-02-15T23:59:59.000Z

425

Microwave-Regenerated Diesel Exhaust Particulate Filter  

SciTech Connect (OSTI)

Development of a microwave-regenerated particulate filter system has evolved from bench scale work to actual diesel engine experimentation. The filter system was initially evaluated on a stationary mounted 1.2-L diesel engine and was able to remove a significant amount of carbon particles from the exhaust. The ability of the microwave energy to regenerate or clean the filter was also demonstrated on this engine under idle conditions. Based on the 1.2-L experiments, improvements to the filter design and materials were implemented and the system was re-evaluated on a vehicle equipped with a 7.3-L diesel engine. The 7.3-L engine was selected to achieve heavy filter loading in a relatively short period of time. The purpose of these experiments was to evaluate filter-loading capacity, power requirements for regeneration, and filter regeneration efficiency. A more detailed evaluation of the filter was performed on a stationary mounted 1.9-L diesel engine. The effect of exhaust flow rate, loading, transients, and regeneration on filter efficiency was evaluated with this setup. In addition, gaseous exhaust emissions were investigated with and without an oxidation catalyst on the filter cartridge during loading and regeneration. (SAE Paper SAE-2001-01-0903 © 2001 SAE International. This paper is published on this website with permission from SAE International. As a user of this website, you are permitted to view this paper on-line, download this pdf file and print one copy of this paper at no cost for your use only. The downloaded pdf file and printout of this SAE paper may not be copied, distributed or forwarded to others or for the use of others.)

Nixdorf, Richard D. (Industrial Ceramic Solution, LLC); Green, Johney Boyd; Story, John M.; Wagner, Robert M. (Oak Ridge National Laboratory)

2001-03-05T23:59:59.000Z

426

Self-Triggered Control over Wireless Sensor and Actuator Networks  

E-Print Network [OSTI]

. Following this trend, several vendors are introducing devices that communicate over low-power wireless and the §National Science Foun- dation award 0834771. adjust heating, ventilation and air conditioning (HVAC

Johansson, Karl Henrik

427

Low Power Filtering Techniques for Wideband and Wireless Applications  

E-Print Network [OSTI]

This dissertation presents design and implementation of continuous time analog filters for two specific applications: wideband analog systems such as disk drive channel and low-power wireless applications. Specific focus has been techniques...

Gambhir, Manisha

2010-10-12T23:59:59.000Z

428

Link Quality Metrics in Large Scale Indoor Wireless Sensor Networks  

E-Print Network [OSTI]

^ut ´energ´etique de cette estimation et de ses cons´equences sur la stabilit´e des routes construites sur (WSN) 1 Introduction Much research has considered the problem of characterizing wireless links

Boyer, Edmond

429

Path-Loss Characteristics of Urban Wireless Channels  

E-Print Network [OSTI]

Wireless channel data was collected in Cambridge, Massachusetts for diverse propagation environments over distances ranging from tens of meters to several kilometers using mobile 2.4-GHz transmitters and receivers. The ...

Herring, Keith T.

430

Energy-efficient wireless sensors : fewer bits, Moore MEMS  

E-Print Network [OSTI]

Adoption of wireless sensor network (WSN) technology could enable improved efficiency across a variety of industries that include building management, agriculture, transportation, and health care. Most of the technical ...

Chen, Fred (Fred Fu-Chin)

2011-01-01T23:59:59.000Z

431

Wireless Electricity Metering of Miscellaneous and Electronic Devices in Buildings  

E-Print Network [OSTI]

Wireless Electricity Metering of Miscellaneous and Electronic Devices in Buildings, University of California, Berkeley, USA Abstract- Miscellaneous and electronic devices hundreds of miscellaneous and electronic devices where metered for several months

Culler, David E.

432

Robust message routing for mobile (wireless) ad hoc networks.  

SciTech Connect (OSTI)

This report describes the results of research targeting improvements in the robustness of message transport in wireless ad hoc networks. The first section of the report provides an analysis of throughput and latency in the wireless medium access control (MAC) layer and relates the analysis to the commonly used 802.11 protocol. The second section describes enhancements made to several existing models of wireless MAC and ad hoc routing protocols; the models were used in support of the work described in the following section. The third section of the report presents a lightweight transport layer protocol that is superior to TCP for use in wireless networks. In addition, it introduces techniques that improve the performance of any ad hoc source routing protocol. The fourth section presents a novel, highly scalable ad hoc routing protocol that is based on geographic principles but requires no localization hardware.

Goldsby, Michael E.; Johnson, Michael M.; Kilman, Dominique Marie (Sandia National Laboratories, Albuquerque, NM); Bierbaum, Neal Robert; Chen, Helen Y.; Ammerlahn, Heidi R.; Tsang, Rose P.; Nicol, David M. (University of Illinois, Urbana, IL)

2004-01-01T23:59:59.000Z

433

Improved Wireless Performance from Mode Scattering in Ventilation Ducts  

E-Print Network [OSTI]

as an in-building wireless infrastructure, prior work has developed an empirical model of the power loss duct systems. Specifically, they found that the power loss due to a signal that passes through multiple

Stancil, Daniel D.

434

Wireless Sensor Network for Monitoring of Historic Structures under Rehabilitation  

E-Print Network [OSTI]

The use of a wireless sensor network (WSN) to monitor an historic structure under rehabilitation is the focus of this research. To thoroughly investigate the issue, two main objectives are addressed: the development of a reliable WSN tailored...

Samuels, Julie Marie

2012-02-14T23:59:59.000Z

435

Cell Breathing in Wireless LANs: Algorithms and Evaluation  

E-Print Network [OSTI]

, IEEE Computer Society, Mohammad T. Hajiaghayi, Kamal Jain, Member, IEEE, Sayyed Vahab Mirrokni, Lili Qiu, Member, IEEE, and Amin Saberi Abstract--Wireless LAN administrators often have to deal

Qiu, Lili

436

Cell Breathing in Wireless LANs: Algorithms and Evaluation  

E-Print Network [OSTI]

Cell Breathing in Wireless LANs: Algorithms and Evaluation Paramvir Bahl Mohammad T. Hajiaghayi Kamal Jain Vahab Mirrokni Lili Qiu Amin Saberi Microsoft Research CMU Microsoft Research MIT UT Austin

Hajiaghayi, Mohammad

437

Challenges and Solutions for Intrusion Detection in Wireless Mesh Networks  

E-Print Network [OSTI]

The problem of intrusion detection in wireless mesh networks (WMN) is challenging, primarily because of lack of single vantage points where traffic can be analyzed and the limited resources available to participating nodes. Although the problem has...

Hassanzadeh, Amin

2014-05-03T23:59:59.000Z

438

Wireless power transmission utilizing a phased array of Tesla coils  

E-Print Network [OSTI]

This thesis discusses the theory and design of coupled resonant systems and how they can be linked in a phased array for the wireless transmission of electrical power. A detailed derivation of their operational theory is ...

Stark, Joseph C. (Joseph Charles), 1980-

2004-01-01T23:59:59.000Z

439

Adaptive primary side control for a wireless power transfer optimization  

E-Print Network [OSTI]

A resonant inductive wireless power transfer system, consisting of a primary (transmitter) circuit and secondary (receiver) circuit, was designed and implemented. This document also contains a novel indirect feedback method ...

Bogoda, Thilani Imanthika Dissanayake

2012-01-01T23:59:59.000Z

440

SoftCast: Clean-slate Scalable Wireless Video  

E-Print Network [OSTI]

Video broadcast and mobile video challenge the conventional wireless design. In broadcast and mobile scenarios the bit rate supported by the channel differs across receivers and varies quickly over time. The conventional ...

Jakubczak, Szymon

2011-02-15T23:59:59.000Z

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Analyzing video compression for transporting over wireless fading channels  

E-Print Network [OSTI]

Wireless video communication is becoming increasingly popular these days with new applications such as TV on mobile and video phones. Commercial success of these applications requires superior video quality at the receiver. So it is imperative...

Kannan, Karthik

2006-10-30T23:59:59.000Z

442

On delay-sensitive communication over wireless systems  

E-Print Network [OSTI]

consider a number of objectives. 1. Develop an integrated methodology for the analysis of wireless systems that support delay-sensitive applications based, in part, on large deviation theory. 2. Use this methodology to identify fundamental performance...

Liu, Lingjia

2009-05-15T23:59:59.000Z

443

A Distributed Wearable, Wireless Sensor System for Evaluating Professional  

E-Print Network [OSTI]

This paper introduces a compact, wireless, wearable system that measures signals indicative of forces, torques and other descriptive and evaluative features that the human body undergoes during bursts of extreme physical ...

Lapinski, Michael Tomasz

444

DEVELOPMENT OFA WIRELESS ACTIVE SYSTEM FOR TPS STRUCTURAL HEALTH MONITORING  

E-Print Network [OSTI]

TPS damage. Several essential aspects are being studied: (a) development of high temperature aspects are being studied: (a) development of high temperature piezoelectric wafer active sensor (HTDEVELOPMENT OFA WIRELESS ACTIVE SYSTEM FOR TPS STRUCTURAL HEALTH MONITORING Victor Giurgiutiu1

Giurgiutiu, Victor

445

Self-configuration, -optimisation and -healing in wireless networks  

E-Print Network [OSTI]

into wireless access networks are (i) to effectuate substantial operational and capital expenditure (O/CAPEX and illustrates the expected gains in terms of O/CAPEX reductions and perform- ance enhancement. An overview

446

Explicit congestion indication for TCP over wireless networks  

E-Print Network [OSTI]

Transmission control protocol (TCP), the widely used transport protocol in the Internet, assumes that packet losses are because of congestion. Wireless networks have higher error rates than wired networks; TCP misinterprets the error losses...

Shishir

2012-06-07T23:59:59.000Z

447

Low Power Adaptive Equaliser Architectures for Wireless LMMSE Receivers   

E-Print Network [OSTI]

Power consumption requires critical consideration during system design for portable wireless communication devices as it has a direct influence on the battery weight and volume required for operation. Wideband Code ...

Tennant, Mark P

2007-01-01T23:59:59.000Z

448

Physiological Sensor System for a wireless tactile display  

E-Print Network [OSTI]

This research focuses on the development of a wearable Physiological Sensor System (PSS) that can be used with a wireless tactile control unit to monitor the physiological status of a mobile user. Two physiological variables, ...

Deo, Nikhila

2005-01-01T23:59:59.000Z

449

Municipal wireless mesh networks as a competitive broadband delivery platform  

E-Print Network [OSTI]

Recently there has been a growing interest in deploying Wireless Mesh Networks by municipalities. This interest stems from the desire to provide broadband connectivity to users lacking access to broadband alternatives. The ...

Hassan-Ali, Mudhafar

2007-01-01T23:59:59.000Z

450

Optimal Classifier Based Spectrum Sensing in Cognitive Radio Wireless Systems  

E-Print Network [OSTI]

Optimal Classifier Based Spectrum Sensing in Cognitive Radio Wireless Systems Siddharth Sharma tolerance. General Terms Algorithms, Theory, Reliability. Keywords Cognitive Radio; Cooperative Spectrum Cognitive radio (CR) networks have been proposed as a revolutionary breakthrough to enhance spectrum

Jagannatham, Aditya K.

451

Integration of wireless sensor networks in environmental monitoring cyber infrastructure  

E-Print Network [OSTI]

Integration of wireless sensor networks in environmental monitoring cyber infrastructure Jue Yang Ã? to revolutionize many science and engineering domains. We present a novel environmental monitoring system collection, management, visualization, dissemination, and exchange, conforming to the new Sensor Web

Huang, Yan

452

A comparative study of Rayleigh fading wireless channel simulators  

E-Print Network [OSTI]

Computer simulation is now increasingly being used for design and performance evaluation of communication systems. When simulating a mobile wireless channel for communication systems, it is usually assumed that the fading process is a random variate...

Sathini Ramaswamy, Vishnu Raghavan

2006-04-12T23:59:59.000Z

453

Method for curing polymers using variable-frequency microwave heating  

DOE Patents [OSTI]

A method for curing polymers incorporating a variable frequency microwave furnace system designed to allow modulation of the frequency of the microwaves introduced into a furnace cavity is disclosed. By varying the frequency of the microwave signal, non-uniformities within the cavity are minimized, thereby achieving a more uniform cure throughout the workpiece. A directional coupler is provided for detecting the direction of a signal and further directing the signal depending on the detected direction. A first power meter is provided for measuring the power delivered to the microwave furnace. A second power meter detects the magnitude of reflected power. The furnace cavity may be adapted to be used to cure materials defining a continuous sheet or which require compressive forces during curing. 15 figs.

Lauf, R.J.; Bible, D.W.; Paulauskas, F.L.

1998-02-24T23:59:59.000Z

454

Method for curing polymers using variable-frequency microwave heating  

DOE Patents [OSTI]

A method for curing polymers (11) incorporating a variable frequency microwave furnace system (10) designed to allow modulation of the frequency of the microwaves introduced into a furnace cavity (34). By varying the frequency of the microwave signal, non-uniformities within the cavity (34) are minimized, thereby achieving a more uniform cure throughout the workpiece (36). A directional coupler (24) is provided for detecting the direction of a signal and further directing the signal depending on the detected direction. A first power meter (30) is provided for measuring the power delivered to the microwave furnace (32). A second power meter (26) detects the magnitude of reflected power. The furnace cavity (34) may be adapted to be used to cure materials defining a continuous sheet or which require compressive forces during curing.

Lauf, Robert J. (Oak Ridge, TN); Bible, Don W. (Clinton, TN); Paulauskas, Felix L. (Oak Ridge, TN)

1998-01-01T23:59:59.000Z

455

Slotted Ground Structures and Their Applications to Various Microwave Components  

E-Print Network [OSTI]

(LPF) using slotted ground structure (SGS) with dumbbell shape is designed and measured to validate its theories. By using SGS techniques presented in this thesis, some other RF/microwave components such as a periodic structure, ultra-wideband bandpass...

Jung, Dong

2010-01-16T23:59:59.000Z

456

Temperature Modeling for Reaction Development in Microwave-Assisted Chemistry  

E-Print Network [OSTI]

made to evaluate and classify the effects of microwave irradiation. While it is commonly acknowledged energy, such as materials processing and food technologies, one can observe an expanding use

Yakovlev, Vadim

457

Analytical scanning evanescent microwave microscope and control stage  

DOE Patents [OSTI]

A scanning evanescent microwave microscope (SEMM) that uses near-field evanescent electromagnetic waves to probe sample properties is disclosed. The SEMM is capable of high resolution imaging and quantitative measurements of the electrical properties of the sample. The SEMM has the ability to map dielectric constant, loss tangent, conductivity, electrical impedance, and other electrical parameters of materials. Such properties are then used to provide distance control over a wide range, from to microns to nanometers, over dielectric and conductive samples for a scanned evanescent microwave probe, which enable quantitative non-contact and submicron spatial resolution topographic and electrical impedance profiling of dielectric, nonlinear dielectric and conductive materials. The invention also allows quantitative estimation of microwave impedance using signals obtained by the scanned evanescent microwave probe and quasistatic approximation modeling. The SEMM can be used to measure electrical properties of both dielectric and electrically conducting materials.

Xiang, Xiao-Dong; Gao, Chen; Duewer, Fred; Yang, Hai Tao; Lu, Yalin

2013-01-22T23:59:59.000Z

458

Virtual cathode microwave generator having annular anode slit  

DOE Patents [OSTI]

A microwave generator is provided for generating microwaves substantially from virtual cathode oscillation. Electrons are emitted from a cathode and accelerated to an anode which is spaced apart from the cathode. The anode has an annular slit therethrough effective to form the virtual cathode. The anode is at least one range thickness relative to electrons reflecting from the virtual cathode. A magnet is provided to produce an optimum magnetic field having the field strength effective to form an annular beam from the emitted electrons in substantial alignment with the annular anode slit. The magnetic field, however, does permit the reflected electrons to axially diverge from the annular beam. The reflected electrons are absorbed by the anode in returning to the real cathode, such that substantially no reflexing electrons occur. The resulting microwaves are produced with a single dominant mode and are substantially monochromatic relative to conventional virtual cathode microwave generators.

Kwan, Thomas J. T. (Los Alamos, NM); Snell, Charles M. (Los Alamos, NM)

1988-01-01T23:59:59.000Z

459

Design and Analysis of Opportunistic MAC Protocols for Cognitive Radio Wireless Networks  

E-Print Network [OSTI]

utilization in cognitive-radio based DSA networks. There are M licensed channels. The ON and OFF states of PUs operating at difierent licensed channels are unsynchronized. : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 68 22 The ON/OFF channel...

Su, Hang

2012-02-14T23:59:59.000Z

460

Wireless Sensors and Networks for Advanced Energy Management  

SciTech Connect (OSTI)

Numerous national studies and working groups have identified low-cost, very low-power wireless sensors and networks as a critical enabling technology for increasing energy efficiency, reducing waste, and optimizing processes. Research areas for developing such sensor and network platforms include microsensor arrays, ultra-low power electronics and signal conditioning, data/control transceivers, and robust wireless networks. A review of some of the research in the following areas will be discussed: (1) Low-cost, flexible multi-sensor array platforms (CO{sub 2}, NO{sub x}, CO, humidity, NH{sub 3}, O{sub 2}, occupancy, etc.) that enable energy and emission reductions in applications such as buildings and manufacturing; (2) Modeling investments (energy usage and savings to drive capital investment decisions) and estimated uptime improvements through pervasive gathering of equipment and process health data and its effects on energy; (3) Robust, self-configuring wireless sensor networks for energy management; and (4) Quality-of-service for secure and reliable data transmission from widely distributed sensors. Wireless communications is poised to support technical innovations in the industrial community, with widespread use of wireless sensors forecasted to improve manufacturing production and energy efficiency and reduce emissions. Progress being made in wireless system components, as described in this paper, is helping bring these projected improvements to reality.

Hardy, J.E.

2005-05-06T23:59:59.000Z

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Inspection of the Department`s export licensing process for dual-use and munitions commodities  

SciTech Connect (OSTI)

The purpose of our inspection was to review the Department of Energy`s (Energy) export licensing process for dual-use and military (munitions) commodities subject to nuclear nonproliferation controls. Specifically, we reviewed Energy`s authorities, procedures, and policies pertaining to the export licensing process and examined procedures for safeguarding data transmitted between Energy and other agencies involved in the export licensing process. We also reviewed Energy`s role as a member of the Subgroup on Nuclear Export Coordination. Our review of the sample of 60 export cases did not find evidence to lead us to believe that Energy`s recommendations for these cases were inappropriate or incorrect. We identified, however, problems regarding management systems associated with the export license review process. We found that without documentation supporting export licensing decisions by the Export Control Operations Division (ECOD), we could not determine whether ECOD analysts considered all required criteria in their review of export cases referred to Energy. For example, we found that the ECOD did not retain records documenting the bases for its advice, recommendations, or decisions regarding its reviews of export license cases or revisions to lists of controlled commodities and, therefore, was not in compliance with certain provisions of the Export Administration Act, as amended, and Energy records management directives. Additionally, we found that the degree of compliance by Energy with the export licensing review criteria contained in the Export Administration Regulations and the Nuclear Non-Proliferation Act of 1978 could not be determined because ECOD did not retain records documenting the bases for its advice and recommendations on export cases.

Not Available

1993-08-10T23:59:59.000Z

462

IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS, VOL. 15, NO. 10, OCTOBER 2005 615 Improved Testing of the Magnetic-Field  

E-Print Network [OSTI]

of the Young Scientist Award Program (LG/TUBA-GEBIP/2002-1-12), by the Scientific and Technical Research. The authors are with the Department of Electrical and Electronics En- gineering, Bilkent University, Ankara R

Gürel, Levent

463

486 IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS, VOL. 17, NO. 7, JULY 2007 Estimation of Roughness-Induced Power Absorption  

E-Print Network [OSTI]

it to predict the roughness effect on power loss. Index Terms--Power absorption, power spectral density (PSD significant additional power loss that can be detrimental for insertion loss limited designs. We recently interconnect surfaces and use it to estimate corresponding roughness-induced power loss. The 2-D PSD

Tsang, Leung

464

518 IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS, VOL. 23, NO. 10, OCTOBER 2013 Designing the Width of Substrate  

E-Print Network [OSTI]

, 2013. Date of publication August 30, 2013; date of current version October 03, 2013. This work are with the Department of Electrical and Computer Engineering, University of Victoria, Victoria, BC V8W 3P6, Canada (e

Bornemann, Jens

465

Microwave and millimeter-wave rectifying circuit arrays and ultra-wideband antennas for wireless power transmission and communications  

E-Print Network [OSTI]

transmission have been developed. Unlike the traditional rectifying circuit using a single diode, dual diodes are used to double the DC output voltage with the same circuit layout dimensions. The rectenna components are then combined to form rectenna arrays...

Ren, Yu-Jiun

2009-05-15T23:59:59.000Z

466

Microwave Metamaterial Applications using Complementary Split Ring Resonators and High Gain Rectifying Reflectarray for Wireless Power Transmission  

E-Print Network [OSTI]

. ..................................................................................... 50 Fig. 28. (a) Half-wave rectifier with capacitor and (b) its waveforms ............................ 52 Fig. 29. Diode current-voltage characteristic curves with the incident fundamental and diode junction voltage waveforms... and 1930?s. In the 1950?s, the development of high power and efficiency micrwave tube by Raytheon Company [18] opened the modern WPT era. The first rectenna was invented in the 1960?s by combining a half-wave dipole antenna and a single diode by W...

Ahn, Chi Hyung

2011-10-21T23:59:59.000Z

467

Microwave mode shifting antenna system for regenerating particulate filters  

DOE Patents [OSTI]

A regeneration system comprises a particulate matter (PM) filter including a microwave energy absorbing surface, and an antenna system comprising N antennas and an antenna driver module that sequentially drives the antenna system in a plurality of transverse modes of the antenna system to heat selected portions of the microwave absorbing surface to regenerate the PM filter, where N is an integer greater than one. The transverse modes may include transverse electric (TE) and/or transverse magnetic (TM) modes.

Gonze, Eugene V [Pinckney, MI; Kirby, Kevin W [Calabasas Hills, CA; Phelps, Amanda [Malibu, CA; Gregoire, Daniel J [Thousand Oaks, CA

2011-04-26T23:59:59.000Z

468

Mathematical and experimental modelling of heat pump assisted microwave drying  

SciTech Connect (OSTI)

Drying is one of the most energy intensive operations in industry and agriculture. In the quest to increase drying efficiency and product quality, new technologies and methods are constantly being sought. Of these technologies, heat pump assisted drying and microwave drying have proved to be the most promising contenders. In order to achieve a better understanding and provide a computer design tool for heat pump assisted convective and microwave drying, both mathematical modelling and experimental investigations of heat pump assisted microwave dryers have been undertaken in this study. A mathematical model has been developed to predict the steady-state performance of a heat pump assisted continuous microwave dryer, with emphasis on the simulation of heat and mass transfer processes in the evaporator and drying chamber. The model is intend to serve as a design tool in the study of heat pump dryers. To achieve the optimum design, the influences of the key design and operating parameters, as well as the comparison of different drying configurations, have been examined. Based on investigation results, several methods have been proposed to improve the performance of heat pump assisted microwave drying, such as the use of a recuperator. To validate the above mathematical model, extensive drying tests using foam rubber as the test material have been conducted on a prototype heat pump assisted microwave dryer. The prototype heat pump input power was 5 kW with a maximum microwave input power of 10 kW. The experimental performance data confirmed the veracity of the simulation model. The experimental results on drying test materials indicate that with careful design heat pump assisted microwave drying is comparable to convective drying in energy consumption while with a much higher drying speed.

Xiguo Jia (Univ. of Queensland (Australia))

1993-01-01T23:59:59.000Z

469

Proposal for an Optomechanical Microwave Sensor at the Subphoton Level  

E-Print Network [OSTI]

Because of their low energy content, microwave signals at the single-photon level are extremely challenging to measure. Guided by recent progress in single-photon optomechanics and hybrid optomechanical systems, we propose a multimode optomechanical transducer that can detect intensities significantly below the single-photon level via adiabatic transfer of the microwave signal to the optical frequency domain where the measurement is then performed. The influence of intrinsic quantum and thermal fluctuations is also discussed.

Keye Zhang; Francesco Bariani; Ying Dong; Weiping Zhang; Pierre Meystre

2015-03-17T23:59:59.000Z

470

Optomechanical microwave sensor at the sub-photon level  

E-Print Network [OSTI]

Due to their low energy content microwave signals at the single-photon level are extremely challenging to measure. Guided by recent progress in single-photon optomechanics and hybrid optomechanical systems, we propose a multimode optomechanical transducer that can detect intensities significantly below the single-photon level via adiabatic transfer of the microwave signal to the optical frequency domain where the measurement is then performed. The influence of intrinsic quantum and thermal fluctuations is also discussed.

Keye Zhang; Francesco Bariani; Ying Dong; Weiping Zhang; Pierre Meystre

2014-09-30T23:59:59.000Z

471

Injection locking of laser diodes for microwave signal generation  

E-Print Network [OSTI]

INJECTION LOCKING OF LASER DIODES FOR MICROWAVE SIGNAL GENERATION A Thesis by BEN-MOU YU Submitted to the Graduate College of Texas ARM University in partial fulfillment. of the requirement. for the degree of MASTER OF SCIENCE August 1987... Major Subject: Electrical Engineering INJECTION LOCKING OF LASER DIODES FOR MICROWAVE SIGNAL GENERATION A Thesis BEN. -MOU YU Approved as to style and content by: Taylor, Henry . (E. E. ) (Chairman of Committee) Chang, Kai (E. E. ) (Member) 0...

Yu, Ben-Mou

2012-06-07T23:59:59.000Z

472

Fuel gas production by microwave plasma in liquid  

SciTech Connect (OSTI)

We propose to apply plasma in liquid to replace gas-phase plasma because we expect much higher reaction rates for the chemical deposition of plasma in liquid than for chemical vapor deposition. A reactor for producing microwave plasma in a liquid could produce plasma in hydrocarbon liquids and waste oils. Generated gases consist of up to 81% hydrogen by volume. We confirmed that fuel gases such as methane and ethylene can be produced by microwave plasma in liquid.

Nomura, Shinfuku; Toyota, Hiromichi; Tawara, Michinaga; Yamashita, Hiroshi; Matsumoto, Kenya [Graduate School of Science and Engineering, Ehime University, 3 Bunkyo-cho, Matsuyama, Ehime 790-8577 (Japan); Shikoku Industry and Technology Promotion Center, 2-5 Marunouchi, Takamatsu, Kagawa 760-0033 (Japan)

2006-06-05T23:59:59.000Z

473

Impact of Fading Wireless Channel on The Performance of Game Theoretic Power Control Algorithms for CDMA Wireless Data  

E-Print Network [OSTI]

for CDMA Wireless Data Mohammad Hayajneh United Arab Emirates University P.O.Box 17555, Al Ain , UAE chaouki@ece.unm.edu Walid Ibrahim United Arab Emirates University P.O.Box 17555, Al Ain , UAE walidibr

474

Method and device for microwave sintering large ceramic articles  

DOE Patents [OSTI]

A microwave sintering system and method are provided for extremely uniform sintering of large and/or irregular shaped ceramic articles at microwave frequencies of at least 28 GHz in the hundreds of kilowatts power range in an untuned cavity. A 28 GHz, 200 kw gyrotron with variable power output is used as the microwave source connected to an untuned microwave cavity formed of an electrically conductive housing through an overmoded waveguide arrangement which acts in conjunction with a mode promoter within the cavity to achieve unexpected field uniformity. The part to be sintered is placed in the cavity and supported on a removable high temperature table in a central location within the cavity. The part is surrounded by a microwave transparent bulk insulating material to reduce thermal heat loss at the part surfaces and maintain more uniform temperature. The cavity may be operated at a high vacuum to aid in preventing arcing. The system allows controlled increased heating rates of greater than 200.degree. C./min to provide rapid heating of a ceramic part to a selected sintering temperature where it is maintained by regulating the microwave power applied to the part. As a result of rapid heating, the extent of non-isothermal processes such as segregation of impurities to the grain boundaries are minimized and exaggerated grain growth is reduced, thereby strengthening the mechanical properties of the ceramic part being sintered.

Kimrey, Jr., Harold D. (Knoxville, TN)

1990-01-01T23:59:59.000Z

475

Microwave processing of ceramic oxide filaments. Annual report, FY1997  

SciTech Connect (OSTI)

The objective of the microwave filament processing project is to develop microwave techniques to manufacture continuous ceramic oxide filaments. Microwave processing uses the volumetric absorption of microwave power in oxide filament tows to drive off process solvents, to burn out organic binders, and to sinter the dried fibers to produce flexible, high-strength ceramic filaments. The technical goal is to advance filament processing technology by microwave heating more rapidly with less energy and at a lower cost than conventional processing, but with the same quality as conventional processing. The manufacturing goal is to collaborate with the 3M Company, a US manufacturer of ceramic oxide filaments, to evaluate the technology using a prototype filament system and to transfer the microwave technology to the 3M Company. Continuous ceramic filaments are a principal component in many advanced high temperature materials like continuous fiber ceramic composites (CFCC) and woven ceramic textiles. The use of continuous ceramic filaments in CFCC radiant burners, gas turbines, waste incineration, and hot gas filters in U.S. industry and power generation is estimated to save at least 2.16 quad/yr by year 2010 with energy cost savings of at least $8.1 billion. By year 2010, continuous ceramic filaments and CFCC`s have the potential to abate pollution emissions by 917,000 tons annually of nitrous oxide and 118 million tons annually of carbon dioxide (DOE Report OR-2002, February, 1994).

Vogt, G.J.

1998-12-31T23:59:59.000Z

476

The Persistence of Economic Factors in Shaping Regulation and Environmental Performance: The Limits of Regulation and Social License Pressures  

E-Print Network [OSTI]

license. That is, economic incentives drive the choice ofa company has strong economic incentives to buy new trucks.$/mile. While the similar economic incentives applied to all

Thornton, Dorothy; Kagan, Robert; Gunningham, Neil

2007-01-01T23:59:59.000Z

477

Energy efficiency in wireless communication systems  

DOE Patents [OSTI]

Wireless communication systems and methods utilize one or more remote terminals, one or more base terminals, and a communication channel between the remote terminal(s) and base terminal(s). The remote terminal applies a direct sequence spreading code to a data signal at a spreading factor to provide a direct sequence spread spectrum (DSSS) signal. The DSSS signal is transmitted over the communication channel to the base terminal which can be configured to despread the received DSSS signal by a spreading factor matching the spreading factor utilized to spread the data signal. The remote terminal and base terminal can dynamically vary the matching spreading factors to adjust the data rate based on an estimation of operating quality over time between the remote terminal and base terminal such that the amount of data being transmitted is substantially maximized while providing a specified quality of service.

Caffrey, Michael Paul; Palmer, Joseph McRae

2012-12-11T23:59:59.000Z

478

-MAC: An Energy-Efficient Medium Access Control for Wireless Sensor Networks  

E-Print Network [OSTI]

-MAC: An Energy-Efficient Medium Access Control for Wireless Sensor Networks Andre Barroso, Utz: ¡ a.barroso u.roedig c.sreenan¢ @cs.ucc.ie Abstract-- For the long-term deployment of wireless sensor

Roedig, Utz

479

Rehabilitation engineers help people with disabilities with wireless technology LATEST NEWS  

E-Print Network [OSTI]

Information Technology Management & Policy Sciences RELATED LINKS - Economic Development News - GTRI Annual two parallel goals: (1) to develop new and innovative ways of applying mobile wireless technologiesRehabilitation engineers help people with disabilities with wireless technology SEARCH LATEST NEWS

480

Delay Analysis of Maximum Weight Scheduling in Wireless Ad Hoc Networks  

E-Print Network [OSTI]

This paper studies delay properties of the well-known maximum weight scheduling algorithm in wireless ad hoc networks. We consider wireless networks with either one-hop or multihop flows. Specifically, this paper shows ...

Modiano, Eytan H.

Note: This page contains sample records for the topic "licensed wireless microwave" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Health Monitoring of Drive Connected Three-Phase Induction Motors ----- From Wired Towards Wireless Sensor Networks  

E-Print Network [OSTI]

5.7: Wireless sensor installation photo (a) accelerometer (5.7 Wireless sensor installation photo (a) accelerometer (b)set up (a) Photo (b) Diagram (b) Sensor: Three vibration

Xue, Xin

2009-01-01T23:59:59.000Z

482

A functional approach for studying technological progress : extension to wireless telecommunications technology  

E-Print Network [OSTI]

This thesis attempts to study the technological progress of wireless technology and the wireless industry throughout history, using high-level, non-device specific performance metrics. Such metrics are developed by following ...

Amaya, Mario A

2008-01-01T23:59:59.000Z

483

Improving packet delivery efficiency using multi-radio diversity in wireless LANs  

E-Print Network [OSTI]

Data transmissions in Wireless Local Area Networks (WLANs) often suffer from bit errors that arise from the notoriously complex and time-varying signal propagation characteristics of the wireless medium. A number of physical ...

Miu, Allen Ka Lun, 1977-

2006-01-01T23:59:59.000Z

484

DAMAGE DETECTION METHODS ON WIND TURBINE BLADE TESTING WITH WIRED AND WIRELESS ACCELEROMETER SENSORS  

E-Print Network [OSTI]

DAMAGE DETECTION METHODS ON WIND TURBINE BLADE TESTING WITH WIRED AND WIRELESS ACCELEROMETER turbine blade. We compare the data collected from the wireless sensors against wired sensors for nonstationary blade excitations. KEYWORDS : Structural Health Monitoring, Damage Detection, Wind Turbine

Paris-Sud XI, Université de

485

Circuits and systems for efficient portable-to-portable wireless charging  

E-Print Network [OSTI]

In today's world of ever-increasing low-power portable electronics, from implants to wireless accessories, powering these devices efficiently and conveniently is an escalating issue. The proposed solution is to wirelessly ...

Jin, Rui, M. Eng. Massachusetts Institute of Technology

2014-01-01T23:59:59.000Z

486

VIDEO TRANSCODING GATEWAY FOR WIRELESS VIDEO ACCESS Zhijun Lei, Nicolas D. Georganas  

E-Print Network [OSTI]

-000 - VIDEO TRANSCODING GATEWAY FOR WIRELESS VIDEO ACCESS Zhijun Lei, Nicolas D. Georganas several typical video transcoding architectures and major applications of video transcoding. We identify issues involved in access video streams through handheld devices and wireless networks. To handle

Ottawa, University of

487

E-Print Network 3.0 - airborne emergency wireless Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

networks. The main source of diversity is the existence of multiple paths in wireless networks... decided to use the gap model proposed in 13 to model the airborne wireless...

488

Achieving Queue-Length Stability Through Maximal Scheduling in Wireless Networks  

E-Print Network [OSTI]

stability region; however, these scheduling strategies also require centralized control. Although [5], [6Achieving Queue-Length Stability Through Maximal Scheduling in Wireless Networks Prasanna Chaporkar through distributed scheduling in wireless networks. We consider a simple, local information based

Sarkar, Saswati

489

Power Control and Transmission Scheduling for Network Utility Maximization in Wireless Networks  

E-Print Network [OSTI]

Power Control and Transmission Scheduling for Network Utility Maximization in Wireless Networks Min power control and transmis- sion scheduling problem in wireless networks with average power constraints. Index Terms--Network utility maximization, power control, transmission scheduling, column generation I

Sharma, Vinod

490

LDPC code-based bandwidth efficient coding schemes for wireless communications  

E-Print Network [OSTI]

This dissertation deals with the design of bandwidth-efficient coding schemes with Low-Density Parity-Check (LDPC) for reliable wireless communications. Code design for wireless channels roughly falls into three categories: (1) when channel state...

Sankar, Hari

2009-06-02T23:59:59.000Z

491

MAC layer power management schemes for efficient energy- delay tradeoffs in wireless local area networks  

E-Print Network [OSTI]

G. De Micheli, “Energy Efficient Design of Portable WirelessSimunic, “Energy Efficient System Design and Utilization”

Sarkar, Mahasweta

2006-01-01T23:59:59.000Z

492

ApplicationSpecific Protocol Architectures for Wireless Networks Wendi Beth Heinzelman  

E-Print Network [OSTI]

for the degree of Doctor of Philosophy Abstract In recent years, advances in energy­efficient design and wireless

Heinzelman, Wendi

493

Addressing the Energy-Delay Tradeoff in Wireless Networks with Load-Proportional Energy Usage  

E-Print Network [OSTI]

. The protocol aspects of the energy efficient design of wireless networks focuses on a number of topics

Sikdar, Biplab

494

Protecting a University's Wireless Data Network with the WPA and VPN Security Solutions  

E-Print Network [OSTI]

.11i standard as a security solution will require a major change in the wireless network elements and wireless terminals due to the cryptographic overhead of AES. Gast, M. S. (2002). 802.11 Wireless Networks: The Definitive Guide. Sebastopol, CA..., IN: Cisco Press. Gast, M. S. (2002). 802.11 Wireless Networks: The Definitive Guide. Sebastopol, CA: O?Reilly & Associates, Inc. Gordon, L. A., Loeb, M. P., Lucyshyn, W., & Richardson, R. (2006). CSI/FBI Computer Crime and Security Survey...

Saksupakul, Rattanachai

2007-05-18T23:59:59.000Z

495

Design and Optimization of Monitoring and Feedback Systems in Wireless Health  

E-Print Network [OSTI]

a number of standard personal devices such as cell phones,small wireless devices such as personal digital assistants (

Rofouei, Mahsan

2012-01-01T23:59:59.000Z

496

EV Charging Through Wireless Power Transfer: Analysis of Efficiency Optimization and Technology Trends  

SciTech Connect (OSTI)

This paper is aimed at reviewing the technology trends for wireless power transfer (WPT) for electric vehicles (EV). It also analyzes the factors affecting its efficiency and describes the techniques currently used for its optimization. The review of the technology trends encompasses both stationary and moving vehicle charging systems. The study of the stationary vehicle charging technology is based on current implementations and on-going developments at WiTricity and Oak Ridge National Lab (ORNL). The moving vehicle charging technology is primarily described through the results achieved by the Korean Advanced Institute of Technology (KAIST) along with on-going efforts at Stanford University. The factors affecting the efficiency are determined through the analysis of the equivalent circuit of magnetic resonant coupling. The air gap between both transmitting and receiving coils along with the magnetic field distribution and the relative impedance mismatch between the related circuits are the primary factors affecting the WPT efficiency. Currently the industry is looking at an air gap of 25 cm or below. To control the magnetic field distribution, Kaist has recently developed the Shaped Magnetic Field In Resonance (SMFIR) technology that uses conveniently shaped ferrite material to provide low reluctance path. The efficiency can be further increased by means of impedance matching. As a result, Delphi's implementation of the WiTricity's technology exhibits a WPT efficiency above 90% for stationary charging while KAIST has demonstrated a maximum efficiency of 83% for moving vehicle with its On Line Vehicle (OLEV) project. This study is restricted to near-field applications (short and mid-range) and does not address long-range technology such as microwave power transfer that has low efficiency as it is based on radiating electromagnetic waves. This paper exemplifies Delphi's work in powertrain electrification as part of its innovation for the real world program geared toward a safer, greener and more connected driving. Moreover, it draws from and adds to Dr. Andrew Brown Jr.'s SAE books 'Active Safety and the Mobility Industry', 'Connectivity and Mobility Industry', and 'Green Technologies and the Mobility Industry'. Magnetic resonant coupling is the foundation of modern wireless power transfer. Its efficiency can be controlled through impedance matching and magnetic field shaping. Current implementations use one or both of these control methods and enable both stationary and mobile charging with typical efficiency within the 80% and 90% range for an air gap up to 25 cm.

Miller, John M [ORNL; Rakouth, Heri [Delphi Automotive Systems, USA; Suh, In-Soo [Korea Advanced Institute of Science and Technology

2012-01-01T23:59:59.000Z

497

Clique-Based Randomized Multiple Access for Energy-Efficient Wireless Ad Hoc Networks  

E-Print Network [OSTI]

Clique-Based Randomized Multiple Access for Energy-Efficient Wireless Ad Hoc Networks Paul G protocol design for wireless ad hoc networks is between proactive and reactive coor- dination, where describe Clique-Based Randomized Multiple Access (CRMA), a distributed MAC protocol for wireless ad hoc

498

Report on a Working Session on Security in Wireless Ad Hoc Networks  

E-Print Network [OSTI]

Report on a Working Session on Security in Wireless Ad Hoc Networks Levente Butty´an Jean organized a working session de- voted to the topic of security in wireless ad hoc networks. This event took setting. Securing wireless ad hoc networks is particularly diffi- cult for many reasons including

Chen, Yuanzhu Peter

499

A New MAC Scheme Supporting Voice/Data Traffic in Wireless Ad Hoc Networks  

E-Print Network [OSTI]

A New MAC Scheme Supporting Voice/Data Traffic in Wireless Ad Hoc Networks Ping Wang, Member, IEEE, Hai Jiang, Member, IEEE, and Weihua Zhuang, Fellow, IEEE Abstract--In wireless ad hoc networks information exchanges among the nodes. Index Terms--Wireless ad hoc networks, medium access control, fairness

Jiang, Hai

500

Topology Control for Fault-Tolerant Communication in Wireless Ad Hoc Networks  

E-Print Network [OSTI]

Topology Control for Fault-Tolerant Communication in Wireless Ad Hoc Networks Bernd Thallner-generation wireless ad hoc networks, which are increasingly being considered also for critical application domains in a fully distributed ("ad hoc") manner. Increasingly, wireless ad hoc networks are also being considered