National Library of Energy BETA

Sample records for left hand corner

  1. Selective Synthesis of "Left-Handed" or "Right-Handed" Chemicals |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Ames Laboratory Selective Synthesis of "Left-Handed" or "Right-Handed" Chemicals A new series of catalysts is able to selectively make "left-handed" or "right-handed" nitrogen-containing compounds known as amines. Left-handed and right-handed molecules contain the same components, but are mirror images of each other. Researchers were able to take strings of nitrogen-containing molecules and make five-, six- and seven-membered rings with

  2. Coffin v. Left Hand Ditch Co., 6 Colo. 443 (1882) | Open Energy...

    Open Energy Info (EERE)

    v. Left Hand Ditch Co., 6 Colo. 443 (1882) Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal CaseHearing: Coffin v. Left Hand Ditch Co., 6 Colo. 443...

  3. Quasi-phase-matching of the dual-band nonlinear left-handed metamaterial

    SciTech Connect (OSTI)

    Liu, Yahong Song, Kun; Gu, Shuai; Liu, Zhaojun; Guo, Lei; Zhao, Xiaopeng; Zhou, Xin

    2014-11-17

    We demonstrate a type of nonlinear meta-atom creating a dual-band nonlinear left-handed metamaterial (DNLHM). The DNLHM operates at two distinct left-handed frequency bands where there is an interval of one octave between the two center frequencies. Under the illumination of a high-power signal at the first left-handed frequency band corresponding to fundamental frequency (FF), second-harmonic generation (SHG) is observed at the second left-handed band. This means that our DNLHM supports backward-propagating waves both at FF and second-harmonic (SH) frequency. We also experimentally demonstrate quasi-phase-matching configurations for the backward SHG. This fancy parametric process can significantly transmits the SH generated by an incident FF wave.

  4. Search for W'->tb resonances with left- and right-handed couplings to fermions

    SciTech Connect (OSTI)

    Abazov, Victor Mukhamedovich; Abbott, Braden Keim; Acharya, Bannanje Sripath; Adams, Mark Raymond; Adams, Todd; Alexeev, Guennadi D.; Alkhazov, Georgiy D.; Alton, Andrew K.; Alverson, George O.; Alves, Gilvan Augusto; Ancu, Lucian Stefan; /Nijmegen U. /Fermilab

    2011-01-01

    We present a search for the production of a heavy gauge boson, W{prime}, that decays to third-generation quarks, by the D0 Collaboration in p{bar p} collisions at {radical}s = 1.96 TeV. We set 95% confidence level upper limits on the production cross section times branching fraction. For the first time, we set limits for arbitrary combinations of left- and right-handed couplings of the W{prime} boson to fermions. For couplings with the same strength as the standard model W boson, we set the following limits for M(W{prime}) > m({nu}{sub R}): M(W{prime}) > 863 GeV for purely left-handed couplings, M(W{prime}) > 885 GeV for purely right-handed couplings, and M(W{prime}) > 916 GeV if both left- and right-handed couplings are present. The limit for right-handed couplings improves for M(W{prime}) < m({nu}{sub R}) to M(W{prime}) > 890 GeV.

  5. Nonlinear coupling of left and right handed circularly polarized dispersive Alfvén wave

    SciTech Connect (OSTI)

    Sharma, R. P. Sharma, Swati Gaur, Nidhi

    2014-07-15

    The nonlinear phenomena are of prominent interests in understanding the particle acceleration and transportation in the interplanetary space. The ponderomotive nonlinearity causing the filamentation of the parallel propagating circularly polarized dispersive Alfvén wave having a finite frequency may be one of the mechanisms that contribute to the heating of the plasmas. The contribution will be different of the left (L) handed mode, the right (R) handed mode, and the mix mode. The contribution also depends upon the finite frequency of the circularly polarized waves. In the present paper, we have investigated the effect of the nonlinear coupling of the L and R circularly polarized dispersive Alfvén wave on the localized structures formation and the respective power spectra. The dynamical equations are derived in the presence of the ponderomotive nonlinearity of the L and R pumps and then studied semi-analytically as well as numerically. The ponderomotive nonlinearity accounts for the nonlinear coupling between both the modes. In the presence of the adiabatic response of the density fluctuations, the nonlinear dynamical equations satisfy the modified nonlinear Schrödinger equation. The equations thus obtained are solved in solar wind regime to study the coupling effect on localization and the power spectra. The effect of coupling is also studied on Faraday rotation and ellipticity of the wave caused due to the difference in the localization of the left and the right modes with the distance of propagation.

  6. Core shroud corner joints

    DOE Patents [OSTI]

    Gilmore, Charles B.; Forsyth, David R.

    2013-09-10

    A core shroud is provided, which includes a number of planar members, a number of unitary corners, and a number of subassemblies each comprising a combination of the planar members and the unitary corners. Each unitary corner comprises a unitary extrusion including a first planar portion and a second planar portion disposed perpendicularly with respect to the first planar portion. At least one of the subassemblies comprises a plurality of the unitary corners disposed side-by-side in an alternating opposing relationship. A plurality of the subassemblies can be combined to form a quarter perimeter segment of the core shroud. Four quarter perimeter segments join together to form the core shroud.

  7. A 3D chiral metal-organic framework based on left-handed helices containing 3-amino-1 H-1,2,4-triazole ligand

    SciTech Connect (OSTI)

    Liu, Bing; Yang, Tian-Yi; Feng, Hui-Jun; Zhang, Zong-Hui; Xu, Ling

    2015-10-15

    A chiral metal-organic framework, [Cu(atr)(OH)]·0.5H{sub 2}O·0.5en (1) (Hatr=3-amino-1 H-1,2,4-triazole, en=ethylenediamine), was constructed via diffusion reaction of the achiral Hatr ligand and CuSO{sub 4} as starting materials. Compound 1 crystallizes in the chiral space group P3{sub 2}21 and features a porous metal-organic framework with 44.1% solvent-accessible volume fabricated by left-handed helices with a pitch height of l{sub p}=10.442 Å. Six helices gather around in a cycle forming a large honeycomb channel with a 6.58 Å inner diameter. Cu(II) center and atr{sup ‒} ligand regarded as 3-connected nodes, compound 1 can be simplified to a 3-c uninodal (4.12{sup 2}) (qtz-h) topological network. A gradual decreasing in the magnetic moment depending on temperature decreasing indicates an antiferromagnetic interaction in 1. The powder XRD confirms the bulk sample is a single crystal pure phase, and the thermogravimetric analysis shows the thermal stability of 1 is up to ca. 240 °C. - Highlights: • The present 3D chiral MOF is built from achiral Hatr ligand. • Six left-handed helices gather into a honeycomb channel in chiral sp P3{sub 2}21. • Compound 1 shows a 3-c uninodal (4.12{sup 2}) or qtz-h topological network. • Compound 1 indicates an antiferromagnetic interaction.

  8. Focusing corner cube

    DOE Patents [OSTI]

    Monjes, J.A.

    1985-09-12

    This invention retortreflects and focuses a beam of light. The invention comprises a modified corner cube reflector wherein one reflective surface is planar, a second reflective surface is spherical, and the third reflective surface may be planar or convex cylindrical.

  9. The rare crystallographic structure of d(CGCGCG){sub 2}: The natural spermidine molecule bound to the minor groove of left-handed Z-DNA d(CGCGCG){sub 2} at 10 {sup o}C

    SciTech Connect (OSTI)

    Ohishi, Hirofumi . E-mail: ohishi@gly.oups.ac.jp; Tozuka, Yoshitaka; Da-Yang, Zhou; Ishida, Toshimasa; Nakatani, Kazuhiko

    2007-06-22

    Several crystal structure analyses of complexes of synthetic polyamine compounds, including N {sup 1}-(2-(2-aminoethylamino))ethyl)ethane-1,2-diamine PA(222) and N {sup 1}-(2-(2-(2-aminoethylamino)ethylamino)ethyl)ethane-1,2-diamine PA(2222), and left-handed Z-DNA d(CGCGCG){sub 2} have been reported. However, until now, there have been no examples of naturally occurring polyamines bound to the minor groove of the left-handed Z-DNA of d(CGCGCG){sub 2} molecule. We have found that spermidine, a natural polyamine, is connected to the minor groove of left-handed Z-DNA of d(CGCGCG){sub 2} molecule in a crystalline complex grown at 10 {sup o}C. The electron density of the DNA molecule was clear enough to determine that the spermidine was connected in the minor groove of two symmetry related molecules of left-handed Z-DNA d(CGCGCG){sub 2}. This is the first example that a spermidine molecule can form a bridge conformation between two symmetry related molecules of left-handed Z-DNA d(CGCGCG){sub 2} in the minor groove.

  10. Stoney Corners Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    Stoney Corners Wind Farm Jump to: navigation, search Name Stoney Corners Wind Farm Facility Stoney Corners Wind Farm Sector Wind energy Facility Type Commercial Scale Wind Facility...

  11. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Corner Fact Sheets Hydrogen Fusion ITER Project US ITER Progress US ITER Participants More Project Background Creating a Star - The Global ITER Partnership Features and Highlights Central Solenoid Fabrication: A Photo Reportage [ITER Newsline, July 18, 2016] Shooting selected pellets into the plasma [ITER Newsline, June 13, 2016] Winding completed on first central solenoid module [ITER Newsline, Arpril 11, 2016] Fusion diagnostics heat up across the US [US ITER, October 22, 2015] Preparing a

  12. Magnetohydrodynamic (MHD) channel corner seal

    DOE Patents [OSTI]

    Spurrier, Francis R.

    1980-01-01

    A corner seal for an MHD duct includes a compressible portion which contacts the duct walls and an insulating portion which contacts the electrodes, sidewall bars and insulators. The compressible portion may be a pneumatic or hydraulic gasket or an open-cell foam rubber. The insulating portion is segmented into a plurality of pieces of the same thickness as the electrodes, insulators and sidewall bars and aligned therewith, the pieces aligned with the insulator being of a different size from the pieces aligned with the electrodes and sidewall bars to create a stepped configuration along the corners of the MHD channel.

  13. Corner-cutting mining assembly

    DOE Patents [OSTI]

    Bradley, John A.

    1983-01-01

    A mining assembly includes a primary rotary cutter mounted on one end of a support shaft and four secondary rotary cutters carried on the same support shaft and positioned behind the primary cutters for cutting corners in the hole cut by the latter.

  14. Corner-cutting mining assembly

    DOE Patents [OSTI]

    Bradley, J.A.

    1981-07-01

    This invention resulted from a contract with the United States Department of Energy and relates to a mining tool. More particularly, the invention relates to an assembly capable of drilling a hole having a square cross-sectional shape with radiused corners. In mining operations in which conventional auger-type drills are used to form a series of parallel, cylindrical holes in a coal seam, a large amount of coal remains in place in the seam because the shape of the holes leaves thick webs between the holes. A higher percentage of coal can be mined from a seam by a means capable of drilling holes having a substantially square cross section. It is an object of this invention to provide an improved mining apparatus by means of which the amount of coal recovered from a seam deposit can be increased. Another object of the invention is to provide a drilling assembly which cuts corners in a hole having a circular cross section. These objects and other advantages are attained by a preferred embodiment of the invention.

  15. Federal Utility Partnership Working Group Seminar: Chairman's Corner |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Seminar: Chairman's Corner Federal Utility Partnership Working Group Seminar: Chairman's Corner Presentation covers the Federal Utility Partnership Working Group Seminar: Chairman's Corner from May 22, 2013. fupwg_spring13_mcandrew.pdf (309.16 KB) More Documents & Publications Federal Utility Partnership Working Group Meeting Chairman's Corner Federal Utility Partnership Working Group Meeting: Chairman's Corner FUPWG Spring 2013 Report and Presentations

  16. Director's Corner | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Director's Corner A National Treasure: NETL's Advanced Materials Research As one of the Energy Department's national laboratories, the National Energy Technology Laboratory (NETL) has a distinguished history of conducting complex and fruitful research for cleaner and more efficient fossil energy innovations. There is an additional national treasure that developed as a central part of that quest: expertise in the discovery, development, and deployment of sophisticated new materials. Some of those

  17. Internships Give Nuclear Technician Students Hands-on Experience...

    Energy Savers [EERE]

    Give Nuclear Technician Students Hands-on Experience Internships Give Nuclear Technician Students Hands-on Experience August 9, 2012 - 2:23pm Addthis Brandalin Barnes, left, is a ...

  18. Federal Utility Partnership Working Group Meeting Chairman's Corner |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Meeting Chairman's Corner Federal Utility Partnership Working Group Meeting Chairman's Corner Presentation-given at the Fall 2012 Federal Utility Partnership Working Group (FUPWG) meeting-lists key utility program projects and upcoming utility energy service contract (UESC) training. Download the Federal Utility Partnership Working Group Meeting Chairman's Corner presentation. (134.21 KB) More Documents & Publications Federal Utility Partnership Working Group

  19. Power plant emissions verified remotely at Four Corners sites

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Power plant emissions verified remotely Power plant emissions verified remotely at Four Corners sites The study is the first to show that space-based techniques can successfully verify international regulations on fossil energy emissions. May 19, 2014 The Four Corners coal-fired power plant, near Farmington, N.M. is a major source of pollutants, with measurements confirmed by Los Alamos National Laboratory researchers. The Four Corners coal-fired power plant, near Farmington, N.M. is a major

  20. Four Corners International LLC FCI | Open Energy Information

    Open Energy Info (EERE)

    clients about finding and implementing new technologies with a view to achieving sustainability of resources at a global level. References: Four Corners International LLC...

  1. New analyses reveal higher Four Corners methane emissions than...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environment Department's San Juan monitoring site, close to two coal-fired power plants. Los Alamos National Laboratory equipment measuring Four Corners area power plant emissions. ...

  2. ARM: X-Band Scanning ARM Cloud Radar (W-SACR) Corner Reflector...

    Office of Scientific and Technical Information (OSTI)

    W-SACR) Corner Reflector Raster Scan Title: ARM: X-Band Scanning ARM Cloud Radar (W-SACR) Corner Reflector Raster Scan X-Band Scanning ARM Cloud Radar (W-SACR) Corner Reflector ...

  3. ARM: Ka-Band Scanning ARM Cloud Radar (KASACR) Corner Reflector...

    Office of Scientific and Technical Information (OSTI)

    Title: ARM: Ka-Band Scanning ARM Cloud Radar (KASACR) Corner Reflector Calibration Ka-Band Scanning ARM Cloud Radar (KASACR) Corner Reflector Calibration Authors: Dan Nelson ; ...

  4. Mines in the Four Corners anticipate growth

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2008-02-15

    Productive mines in the southwest deplete reserves, while the government drags its heels on new power projects. Production in Arizona and New Mexico has fallen 18% over the last four years to 34.1 million tons. With Chevron Mining's McKinley mine rapidly depleting its reserves the industry will continue to contract. In the last three years at least three large mines in the Four Corners have terminated operations. Three others remain captive operations: BHP Billiton's San Juan Underground and Navajo Surface operations and Peabody Energy's Kayenta surface mine. In 2006 the Black Mesa mine stopped producing coal. These four mines are isolated from the national railways. Peabody's new El Segundo surface mine near Grants, NM is increasing production. If the planned $3 billion Desert Rock coal-fired power plant is built this will present a new market for the Navajo mine. The article gives details about the state of the aforementioned mines and of the new King II coal mine on the northern periphery of the San Juan basin and discusses the state of plans for the Desert Rock Energy Project. 5 photos.

  5. College Corner, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    article is a stub. You can help OpenEI by expanding it. College Corner is a village in Butler County and Preble County, Ohio. It falls under Ohio's 8th congressional...

  6. Four Corners methane hotspot points to coal-related sources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Methane hotspot points to coal-related sources Four Corners methane hotspot points to coal-related sources Methane is very efficient at trapping heat in the atmosphere and, like ...

  7. Power plant emissions verified remotely at Four Corners sites

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    May 19, 2014 The Four Corners coal-fired power plant, near Farmington, N.M. is a major source of pollutants, with measurements confirmed by Los Alamos National Laboratory ...

  8. Searching for the corner seismic moment in worldwide data

    SciTech Connect (OSTI)

    Felgueiras, Miguel; Santos, Rui; Martins, João Paulo

    2015-12-31

    In this paper the existence of the corner frequency value for the seismic moment distribution is investigated, analysing worldwide data. Pareto based distributions, usually considered as the most suitable to this type of data, are fitted to the most recent data, available in a global earthquake catalog. Despite the undeniable finite nature of the seismic moment data, we conclude that no corner frequency can be established considering the available data set.

  9. LX-17 Corner-Turning and Reactive Flow Failure

    SciTech Connect (OSTI)

    Souers, P C; Andreski, H; Cook III, C F; Garza, R; Pastrone, R; Phillips, D; Roeske, F; Vitello, P; Molitoris, J

    2004-03-11

    We have performed a series of highly-instrumented experiments examining corner-turning of detonation. A TATB booster is inset 15 mm into LX-17 (92.5% TATB, 7.5% kel-F) so that the detonation must turn a right angle around an air well. An optical pin located at the edge of the TATB gives the start time of the corner-turn. The breakout time on the side and back edges is measured with streak cameras. Three high-resolution X-ray images were taken on each experiment to examine the details of the detonation. We have concluded that the detonation cannot turn the corner and subsequently fails, but the shock wave continues to propagate in the unreacted explosive, leaving behind a dead zone. The detonation front farther out from the corner slowly turns and eventually reaches the air well edge 180{sup o} from its original direction. The dead zone is stable and persists 7.7 {micro}s after the corner-turn, although it has drifted into the original air well area. Our regular reactive flow computer models sometimes show temporary failure but they recover quickly and are unable to model the dead zones. We present a failure model that cuts off the reaction rate below certain detonation velocities and reproduces the qualitative features of the corner-turning failure.

  10. Selective Synthesis of "Left-Handed" or "Right-Handed" Chemicals...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Most other catalysts produce a mixture of both enantiomers. Researchers studied hafnium, titanium and zirconium (Group 4) containing catalysts and found the zirconium catalysts to ...

  11. ASD All Hands Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Schmerge SPEAR3 AD All Hands Meeting November 24, 2009 1 SPEAR3 Accelerator Division All Hands Meeting John Schmerge John Schmerge SPEAR3 AD All Hands Meeting November 24, 2009 2 Outline * Organization - SSRL - AD - SPEAR3 Accelerator Division * Electrical Systems Support * Service Level Agreements * System Managers * Safety - WPC - Recent Accidents - Lessons Learned * Accelerator Projects - 0-1 year - 1-5 year - > 5 year John Schmerge SPEAR3 AD All Hands Meeting November 24, 2009 3 Photon

  12. Corner heating in rectangular solid oxide electrochemical cell generators

    DOE Patents [OSTI]

    Reichner, Philip

    1989-01-01

    Disclosed is an improvement in a solid oxide electrochemical cell generator 1 having a rectangular design with four sides that meet at corners, and containing multiplicity of electrically connected fuel cells 11, where a fuel gas is passed over one side of said cells and an oxygen containing gas is passed into said cells, and said fuel is burned to form heat, electricity, and an exhaust gas. The improvement comprises passing the exhaust gases over the multiplicity of cells 11 in such a way that more of the heat in said exhaust gases flows at the corners of the generator, such as through channels 19.

  13. The Sandia Hand Features

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sandia National Laboratories, in collaboration with Stanford University and Lunar, has developed The Sandia Hand for the DARPA-sponsored Autonomous Robotic Manipulation (ARM) ...

  14. Left Coast Electric Formerly Left Coast Conversions | Open Energy...

    Open Energy Info (EERE)

    Services Product: California-based company that provides services and products for electric cars. References: Left Coast Electric (Formerly Left Coast Conversions)1 This...

  15. ARM: Ka-Band Scanning ARM Cloud Radar (KASACR) Corner Reflector...

    Office of Scientific and Technical Information (OSTI)

    Title: ARM: Ka-Band Scanning ARM Cloud Radar (KASACR) Corner Reflector Raster Scan Ka-Band Scanning ARM Cloud Radar (KASACR) Corner Reflector Raster Scan Authors: Dan Nelson ; ...

  16. Cube-corner reflectors with interference dielectric coating

    SciTech Connect (OSTI)

    Sokolov, A L; Murashkin, V V; Akent'ev, A S; Karaseva, E A

    2013-09-30

    The cube-corner reflectors (CCRs) with a special interference dielectric coating intended for ring retroreflector systems of space vehicles with uniaxial orientation are considered. The diffraction patterns of radiation reflected from the CCRs with different face coatings are studied. It is shown that the choice of the angle between the faces, the size and the coating of CCR faces allow essential variation in the diffraction pattern, thereby providing its optimisation for solving different navigation problems. (nanogradient dielectric coatings and metamaterials)

  17. AUTOMATIC HAND COUNTER

    DOE Patents [OSTI]

    Mann J.R.; Wainwright, A.E.

    1963-06-11

    An automatic, personnel-operated, alpha-particle hand monitor is described which functions as a qualitative instrument to indicate to the person using it whether his hands are cold'' or hot.'' The monitor is activated by a push button and includes several capacitor-triggered thyratron tubes. Upon release of the push button, the monitor starts the counting of the radiation present on the hands of the person. If the count of the radiation exceeds a predetermined level within a predetermined time, then a capacitor will trigger a first thyratron tube to light a hot'' lamp. If, however, the count is below such level during this time period, another capacitor will fire a second thyratron to light a safe'' lamp. (AEC)

  18. Hands-On Exercises

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NERSC » Hands-On Exercises Hands-On Exercises The following commands are to be run from a Linux, UNIX, BSD, or Mac OSX command prompt. You can do the same functions from a GUI or third-party application, but the procedure will be application-dependent. mymachine% - commands typed at your local machine prompt hopper% - commands to be typed at the hopper command prompt Connecting to NERSC SSH to hopper.nersc.gov mymachine% ssh -l <username> -Y -A hopper.nersc.gov Look around on Hopper

  19. Hands-On Exercises

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NERSC » Hands-On Exercises Hands-On Exercises The following commands are to be run from a Linux, UNIX, BSD, or Mac OSX command prompt. You can do the same functions from a GUI or third-party application, but the procedure will be application-dependent. mymachine% - commands typed at your local machine prompt hopper% - commands to be typed at the hopper command prompt Connecting to NERSC SSH to hopper.nersc.gov mymachine% ssh -l <username> -Y -A hopper.nersc.gov Look around on Hopper

  20. Hands-On Exercises

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NERSC » Hands-On Exercises Hands-On Exercises The following commands are to be run from a Linux, UNIX, BSD, or Mac OSX command prompt. You can do the same functions from a GUI or third-party application, but the procedure will be application-dependent. mymachine% - commands typed at your local machine prompt hopper% - commands to be typed at the hopper command prompt Connecting to NERSC SSH to hopper.nersc.gov mymachine% ssh -l <username> -Y -A hopper.nersc.gov Look around on Hopper

  1. THIS PAGE INTENTIONALLY LEFT BLANK

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    THIS PAGE INTENTIONALLY LEFT BLANK i U.S. DEPARTMENT OF ENERGY CRITICAL MATERIALS STRATEGY DECEMBER 2011 ii THIS PAGE INTENTIONALLY LEFT BLANK iii TABLE OF CONTENTS FOREWORD ........................................................................................................................................................... 1 ACKNOWLEDGEMENTS .......................................................................................................................................... 2 EXECUTIVE

  2. Electrically powered hand tool

    DOE Patents [OSTI]

    Myers, Kurt S.; Reed, Teddy R.

    2007-01-16

    An electrically powered hand tool is described and which includes a three phase electrical motor having a plurality of poles; an electrical motor drive electrically coupled with the three phase electrical motor; and a source of electrical power which is converted to greater than about 208 volts three-phase and which is electrically coupled with the electrical motor drive.

  3. Federal Utility Partnership Working Group Seminar: Chairman's Corner

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Chairman's Corner May 22, 2013 David McAndrew Utility Project Lead DOE FEMP 2 Welcome To San Francisco  Thank you to PG&E for hosting the 2013 Spring FUPWG Seminar!  Special thanks to Chris Gillis and Matt Bergh  Welcome Webinar Participants!  The first half of todays meeting is available via webinar  Webinar participants are encouraged to send questions and feedback to me at David.McAndrew@ee.doe.gov or Susan Courtney at scourtney@energetics.com  Thanks to the Steering

  4. Federal-Tribal Partnership on Climate Change Action Rounds Corner, Shifts

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Into High Gear at 2013 Tribal Nations Conference | Department of Energy Federal-Tribal Partnership on Climate Change Action Rounds Corner, Shifts Into High Gear at 2013 Tribal Nations Conference Federal-Tribal Partnership on Climate Change Action Rounds Corner, Shifts Into High Gear at 2013 Tribal Nations Conference November 19, 2013 - 5:12pm Addthis Federal-Tribal Partnership on Climate Change Action Rounds Corner, Shifts Into High Gear at 2013 Tribal Nations Conference David F. Conrad

  5. Method for protecting chip corners in wet chemical etching of wafers

    DOE Patents [OSTI]

    Hui, W.C.

    1994-02-15

    The present invention is a corner protection mask design that protects chip corners from undercutting during anisotropic etching of wafers. The corner protection masks abut the chip corner point and extend laterally from segments along one or both corner sides of the corner point, forming lateral extensions. The protection mask then extends from the lateral extensions, parallel to the direction of the corner side of the chip and parallel to scribe lines, thus conserving wafer space. Unmasked bomb regions strategically formed in the protection mask facilitate the break-up of the protection mask during etching. Corner protection masks are useful for chip patterns with deep grooves and either large or small chip mask areas. Auxiliary protection masks form nested concentric frames that etch from the center outward are useful for small chip mask patterns. The protection masks also form self-aligning chip mask areas. The present invention is advantageous for etching wafers with thin film windows, microfine and micromechanical structures, and for forming chip structures more elaborate than presently possible. 63 figures.

  6. Method for protecting chip corners in wet chemical etching of wafers

    DOE Patents [OSTI]

    Hui, Wing C.

    1994-01-01

    The present invention is a corner protection mask design that protects chip corners from undercutting during anisotropic etching of wafers. The corner protection masks abut the chip corner point and extend laterally from segments along one or both corner sides of the corner point, forming lateral extensions. The protection mask then extends from the lateral extensions, parallel to the direction of the corner side of the chip and parallel to scribe lines, thus conserving wafer space. Unmasked bomb regions strategically formed in the protection mask facilitate the break-up of the protection mask during etching. Corner protection masks are useful for chip patterns with deep grooves and either large or small chip mask areas. Auxiliary protection masks form nested concentric frames that etch from the center outward are useful for small chip mask patterns. The protection masks also form self-aligning chip mask areas. The present invention is advantageous for etching wafers with thin film windows, microfine and micromechanical structures, and for forming chip structures more elaborate than presently possible.

  7. ORNL researcher developing robotic hand

    ScienceCinema (OSTI)

    Dr.Lonnie Love

    2010-01-08

    Oak Ridge National Lab is literally giving the robotics industry a hand. One scientist there is currently working on a fluid powered hand that will help everyone from amputees to the military.

  8. HandsFree TLCMS

    Energy Science and Technology Software Center (OSTI)

    2004-07-30

    The HandsFreeTLCMS software is able to - control an x,y,z stage connected to the computer via USB interface - automatically form and maintain the liquid junction between a TLC plate and the sampling probe of a TLC/MS surface sampler unit - automatically accomplish multiple-lane scans over a TLC plate making able to sample the whole surface by a pre-defined, reproducible, automated method - analyze mass spectrometric data collected during the surface scans and make datafilesmore » those contain x,y coordinates of surface spots (collected during the surface scans) and the corresponding mass signal intensities (integrated over a pre-defined m/z range) at those spots to produce 3-dimensional plots later in external graphic programs. - produce and save greyscale or color 2D pictures where X and Y axises of the picture correspond to the horizontal (x) and vertical (y) range of the scanned surface area and the color of a pixel is determined by the corresponding mass signal intensities (integrated over a pre-defined m/z range) at that X,Y spot« less

  9. All Hands 2015 | Photosynthetic Antenna Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 All Hands 2015 Our sixth annual All Hands meeting from June 22-24th, 2015

  10. Matching a statistical pressure snake to a four-sided polygon and estimating the polygon corners.

    SciTech Connect (OSTI)

    Schaub, Hanspeter; Wilson, Chris C.

    2004-05-01

    Given a video image source, a statistical pressure snake is able to track a color target in real time. This report presents an algorithm that exploits the one-dimensional nature of the visual snake target outline. If the target resembles a four-sided polygon, then the four polygon sides are identified by mapping all image snake point coordinates into Hough space where lines become points. After establishing that four dominant lines are present in snake contour, the polygon corner points are estimated. The computation burden of this algorithm is of the N logN type. The advantage of this method is that it can provide real-time target corner estimates, even if the corners themselves might be occluded.

  11. Hand held explosives detection system

    DOE Patents [OSTI]

    Conrad, Frank J.

    1992-01-01

    The present invention is directed to a sensitive hand-held explosives detection device capable of detecting the presence of extremely low quantities of high explosives molecules, and which is applicable to sampling vapors from personnel, baggage, cargo, etc., as part of an explosives detection system.

  12. LX-17 and ufTATB Data for Corner-Turning, Failure and Detonation

    SciTech Connect (OSTI)

    Souers, P C; Lauderbach, L; Garza, R; Vitello, P; Hare, D E

    2010-02-03

    Data is presented for the size (diameter) effect for ambient and cold confined LX-17, unconfined ambient LX-17, and confined ambient ultrafine TATB. Ambient, cold and hot double cylinder corner-turning data for LX-17, PBX 9502 and ufTATB is presented. Transverse air gap crossing in ambient LX-17 is studied with time delays given for detonations that cross.

  13. All Hands 2014 | Photosynthetic Antenna Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 All Hands 2014 A look at the 5th annual PARC All Hands Meeting at Washington University in St. Louis

  14. Four Corners Wind Resource Center Webinar: Building Utility-Scale Wind: Permitting and Regulation Lessons for County Decision-Makers

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Four Corners Wind Resource Center will host this webinar exploring lessons learned in the permitting of utility-scale wind projects and the development of ordinances and regulations for...

  15. Four Corners Wind Resource Center Webinar: Recent Developments in Western Energy Markets, the EIM, and the Integration of Wind Energy

    Broader source: Energy.gov [DOE]

    Utilities and electric balancing authorities in the Four Corners states may now choose to join the Energy Imbalance Market (EIM), buying and selling energy on a 5-minute basis. The EIM should...

  16. Mixed dark matter in left-right symmetric models

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Berlin, Asher; Fox, Patrick J.; Hooper, Dan; Mohlabeng, Gopolang

    2016-06-08

    Motivated by the recently reported diboson and dijet excesses in Run 1 data at ATLAS and CMS, we explore models of mixed dark matter in left-right symmetric theories. In this study, we calculate the relic abundance and the elastic scattering cross section with nuclei for a number of dark matter candidates that appear within the fermionic multiplets of left-right symmetric models. In contrast to the case of pure multiplets, WIMP-nucleon scattering proceeds at tree-level, and hence the projected reach of future direct detection experiments such as LUX-ZEPLIN and XENON1T will cover large regions of parameter space for TeV-scale thermal darkmore » matter. Decays of the heavy charged W(') boson to particles in the dark sector can potentially shift the right-handed gauge coupling to larger values when fixed to the rate of the Run 1 excesses, moving towards the theoretically attractive scenario, gR = gL. Furthermore, this region of parameter space may be probed by future collider searches for new Higgs bosons or electroweak fermions.« less

  17. Left-Right Symmetry: From the LHC to Neutrinoless Double Beta Decay

    SciTech Connect (OSTI)

    Tello, Vladimir [SISSA, Trieste (Italy); Nemevsek, Miha [ICTP, Trieste (Italy); Jozef Stefan Institute, Ljubljana (Slovenia); Nesti, Fabrizio [Universita di Ferrara, Ferrara (Italy); Senjanovic, Goran [ICTP, Trieste (Italy); Vissani, Francesco [LNGS, INFN, Assergi (Italy)

    2011-04-15

    The Large Hadron Collider has the potential to probe the scale of left-right symmetry restoration and the associated lepton number violation. Moreover, it offers the hope of measuring the right-handed leptonic mixing matrix. We show how this, together with constraints from lepton flavor violating processes, can be used to make predictions for neutrinoless double beta decay. We illustrate this connection in the case of the type-II seesaw.

  18. Susan Murabana - Astronomer, Global Hands On Universe

    ScienceCinema (OSTI)

    Murabana, Susan

    2013-05-29

    Susan Murabana is working to bring astronomy education to Africa through Global Hands-On Universe, a program founded by Berkeley Lab astronomer Carl Pennypacker.

  19. Swipe Left, Power Down: Using Interactive Media to Instill Behavior...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Swipe Left, Power Down: Using Interactive Media to Instill Behavior Change (301) Swipe Left, Power Down: Using Interactive Media to Instill Behavior Change (301) June 9

  20. Left-Wing Extremism: The Current Threat

    SciTech Connect (OSTI)

    Karl A. Seger

    2001-04-30

    Left-wing extremism is ''alive and well'' both in the US and internationally. Although the current domestic terrorist threat within the U. S. is focused on right-wing extremists, left-wing extremists are also active and have several objectives. Leftist extremists also pose an espionage threat to U.S. interests. While the threat to the U.S. government from leftist extremists has decreased in the past decade, it has not disappeared. There are individuals and organizations within the U.S. who maintain the same ideology that resulted in the growth of left-wing terrorism in this country in the 1970s and 1980s. Some of the leaders from that era are still communicating from Cuba with their followers in the U.S., and new leaders and groups are emerging.

  1. 2016 JCAP All-Hands Meeting - JCAP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2016 JCAP All-Hands Meeting 2016 JCAP All-Hands Meeting Tue, Mar 22, 2016 12:00pm 12:00 Thu, Mar 24, 2016 12:00pm 12:00 Asilomar Conference Grounds 800 Asilomar Avenue Pacific Grove, CA 93950 United States JCAP All-Hands Meeting is a required annual event for all JCAP members. It is for JCAP personnel only. For more information, please contact Tiffany Kimoto. June 16 Research Opportunities in Photochemistry, Solar Energy & Advanced X-ray Methods (Stanford, CA)

  2. Webinar: Hands-on Energy Literacy

    Broader source: Energy.gov [DOE]

    As part of the Will Steger Foundation's Climate and Energy Literacy Webinar Series, this webinar will include presentations by two leading energy literacy and STEM education experts, including examples of hands-on classroom activities related to renewable energy.

  3. Intelligent, self-contained robotic hand

    DOE Patents [OSTI]

    Krutik, Vitaliy; Doo, Burt; Townsend, William T.; Hauptman, Traveler; Crowell, Adam; Zenowich, Brian; Lawson, John

    2007-01-30

    A robotic device has a base and at least one finger having at least two links that are connected in series on rotary joints with at least two degrees of freedom. A brushless motor and an associated controller are located at each joint to produce a rotational movement of a link. Wires for electrical power and communication serially connect the controllers in a distributed control network. A network operating controller coordinates the operation of the network, including power distribution. At least one, but more typically two to five, wires interconnect all the controllers through one or more joints. Motor sensors and external world sensors monitor operating parameters of the robotic hand. The electrical signal output of the sensors can be input anywhere on the distributed control network. V-grooves on the robotic hand locate objects precisely and assist in gripping. The hand is sealed, immersible and has electrical connections through the rotary joints for anodizing in a single dunk without masking. In various forms, this intelligent, self-contained, dexterous hand, or combinations of such hands, can perform a wide variety of object gripping and manipulating tasks, as well as locomotion and combinations of locomotion and gripping.

  4. Computational Fluid Dynamics Modeling of the Bonneville Project: Tailrace Spill Patterns for Low Flows and Corner Collector Smolt Egress

    SciTech Connect (OSTI)

    Rakowski, Cynthia L.; Serkowski, John A.; Richmond, Marshall C.; Perkins, William A.

    2010-12-01

    In 2003, an extension of the existing ice and trash sluiceway was added at Bonneville Powerhouse 2 (B2). This extension started at the existing corner collector for the ice and trash sluiceway adjacent to Bonneville Powerhouse 2 and the new sluiceway was extended to the downstream end of Cascade Island. The sluiceway was designed to improve juvenile salmon survival by bypassing turbine passage at B2, and placing these smolt in downstream flowing water minimizing their exposure to fish and avian predators. In this study, a previously developed computational fluid dynamics model was modified and used to characterized tailrace hydraulics and sluiceway egress conditions for low total river flows and low levels of spillway flow. STAR-CD v4.10 was used for seven scenarios of low total river flow and low spill discharges. The simulation results were specifically examined to look at tailrace hydraulics at 5 ft below the tailwater elevation, and streamlines used to compare streamline pathways for streamlines originating in the corner collector outfall and adjacent to the outfall. These streamlines indicated that for all higher spill percentage cases (25% and greater) that streamlines from the corner collector did not approach the shoreline at the downstream end of Bradford Island. For the cases with much larger spill percentages, the streamlines from the corner collector were mid-channel or closer to the Washington shore as they moved downstream. Although at 25% spill at 75 kcfs total river, the total spill volume was sufficient to "cushion" the flow from the corner collector from the Bradford Island shore, areas of recirculation were modeled in the spillway tailrace. However, at the lowest flows and spill percentages, the streamlines from the B2 corner collector pass very close to the Bradford Island shore. In addition, the very flow velocity flows and large areas of recirculation greatly increase potential predator exposure of the spillway passed smolt. If there is

  5. Hand-held multiple system gas chromatograph

    DOE Patents [OSTI]

    Yu, Conrad M.

    2001-01-01

    A multiple parallel hand-held gas chromatograph (GC) system which includes several independent GCs. Each independent GC has its own injector, separation column, detector and oven and the GCs are mounted in a light weight hand-held assembly. Each GC operates independently and simultaneously. Because of different coatings in different separation columns, different retention times for the same gas will be measured. Thus, for a GC system with multiple parallel GCs, the system can measure, in a short period, different retention times and provide a cross-reference in the determination of the measured gas and to become a two-dimensional system for direct field use.

  6. Cohesive zone finite element analysis of crack initiation from a butt joint’s interface corner

    SciTech Connect (OSTI)

    Reedy, E. D.

    2014-09-06

    The Cohesive zone (CZ) fracture analysis techniques are used to predict the initiation of crack growth from the interface corner of an adhesively bonded butt joint. In this plane strain analysis, a thin linear elastic adhesive layer is sandwiched between rigid adherends. There is no preexisting crack in the problem analyzed, and the focus is on how the shape of the traction–separation (T–U) relationship affects the predicted joint strength. Unlike the case of a preexisting interfacial crack, the calculated results clearly indicate that the predicted joint strength depends on the shape of the T–U relationship. Most of the calculations used a rectangular T–U relationship whose shape (aspect ratio) is defined by two parameters: the interfacial strength σ* and the work of separation/unit area Γ. The principal finding of this study is that for a specified adhesive layer thickness, there is any number of σ*, Γ combinations that generate the same predicted joint strength. For each combination there is a corresponding CZ length. We developed an approximate CZ-like elasticity solution to show how such combinations arise and their connection with the CZ length.

  7. Cohesive zone finite element analysis of crack initiation from a butt joint’s interface corner

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Reedy, E. D.

    2014-09-06

    The Cohesive zone (CZ) fracture analysis techniques are used to predict the initiation of crack growth from the interface corner of an adhesively bonded butt joint. In this plane strain analysis, a thin linear elastic adhesive layer is sandwiched between rigid adherends. There is no preexisting crack in the problem analyzed, and the focus is on how the shape of the traction–separation (T–U) relationship affects the predicted joint strength. Unlike the case of a preexisting interfacial crack, the calculated results clearly indicate that the predicted joint strength depends on the shape of the T–U relationship. Most of the calculations usedmore » a rectangular T–U relationship whose shape (aspect ratio) is defined by two parameters: the interfacial strength σ* and the work of separation/unit area Γ. The principal finding of this study is that for a specified adhesive layer thickness, there is any number of σ*, Γ combinations that generate the same predicted joint strength. For each combination there is a corresponding CZ length. We developed an approximate CZ-like elasticity solution to show how such combinations arise and their connection with the CZ length.« less

  8. Air Gaps, Size Effect, and Corner-Turning in Ambient LX-17

    SciTech Connect (OSTI)

    Souers, P C; Hernandez, A; Cabacungan, C; Fried, L; Garza, R; Glaesemann, K; Lauderbach, L; Liao, S; Vitello, P

    2008-02-05

    Various ambient measurements are presented for LX-17. The size (diameter) effect has been measured with copper and Lucite confinement, where the failure radii are 4.0 and 6.5 mm, respectively. The air well corner-turn has been measured with an LX-07 booster, and the dead-zone results are comparable to the previous TATB-boosted work. Four double cylinders have been fired, and dead zones appear in all cases. The steel-backed samples are faster than the Lucite-backed samples by 0.6 {micro}s. Bare LX-07 and LX-17 of 12.7 mm-radius were fired with air gaps. Long acceptor regions were used to truly determine if detonation occurred or not. The LX-07 crossed at 10 mm with a slight time delay. Steady state LX-17 crossed at 3.5 mm gap but failed to cross at 4.0 mm. LX-17 with a 12.7 mm run after the booster crossed a 1.5 mm gap but failed to cross 2.5 mm. Timing delays were measured where the detonation crossed the gaps. The Tarantula model is introduced as embedded in 0 reactive flow JWL++ and Linked Cheetah V4, mostly at 4 zones/mm. Tarantula has four pressure regions: off, initiation, failure and detonation. The physical basis of the input parameters is considered.

  9. Potential for Photovoltaic Solar Installation in Non-Irrigated Corners of Center Pivot Irrigation Fields in the State of Colorado

    SciTech Connect (OSTI)

    Roberts, B.

    2011-07-01

    The State of Colorado expressed an interest in assessing the potential for photovoltaic (PV) solar installations on non-irrigated corners of center-pivot irrigation (CPI) fields throughout the state. Using aerial imagery and irrigated land data available from the Colorado Water Conservation Board, an assessment of potentially suitable sites was produced. Productivity estimates were calculated from that assessment. The total area of non-irrigated corners of CPI fields in Colorado was estimated to be 314,674 acres, which could yield 223,418 acres of installed PV panels assuming 71% coverage in triangular plots. The total potential annual electricity production for the state was estimated to be 56,821 gigawatt hours (GWH), with an average of 1.3 GWH per available plot.

  10. Los Alamos offers participants hands-on experience with renewable...

    Office of Scientific and Technical Information (OSTI)

    Los Alamos offers participants hands-on experience with renewable energy technology Citation Details In-Document Search Title: Los Alamos offers participants hands-on experience...

  11. Hand County, South Dakota: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Climate Zone Number 6 Climate Zone Subtype A. Places in Hand County, South Dakota Miller, South Dakota Northwest Hand, South Dakota Ree Heights, South Dakota St. Lawrence,...

  12. Method and system for detecting polygon boundaries of structures in images as particle tracks through fields of corners and pixel gradients

    DOE Patents [OSTI]

    Paglieroni, David W.; Manay, Siddharth

    2011-12-20

    A stochastic method and system for detecting polygon structures in images, by detecting a set of best matching corners of predetermined acuteness .alpha. of a polygon model from a set of similarity scores based on GDM features of corners, and tracking polygon boundaries as particle tracks using a sequential Monte Carlo approach. The tracking involves initializing polygon boundary tracking by selecting pairs of corners from the set of best matching corners to define a first side of a corresponding polygon boundary; tracking all intermediate sides of the polygon boundaries using a particle filter, and terminating polygon boundary tracking by determining the last side of the tracked polygon boundaries to close the polygon boundaries. The particle tracks are then blended to determine polygon matches, which may be made available, such as to a user, for ranking and inspection.

  13. Preliminary Neutronics Analysis of the ITER Toroidal Interferometer and Polarimeter Diagnostic Corner Cube Retroreflectors

    SciTech Connect (OSTI)

    Tresemer, K. R.

    2015-07-01

    ITER is an international project under construction in France that will demonstrate nuclear fusion at a power plant-relevant scale. The Toroidal Interferometer and Polarimeter (TIP) Diagnostic will be used to measure the plasma electron line density along 5 laser-beam chords. This line-averaged density measurement will be input to the ITER feedback-control system. The TIP is considered the primary diagnostic for these measurements, which are needed for basic ITER machine control. Therefore, system reliability & accuracy is a critical element in TIP’s design. There are two major challenges to the reliability of the TIP system. First is the survivability and performance of in-vessel optics and second is maintaining optical alignment over long optical paths and large vessel movements. Both of these issues greatly depend on minimizing the overall distortion due to neutron & gamma heating of the Corner Cube Retroreflectors (CCRs). These are small optical mirrors embedded in five first wall locations around the vacuum vessel, corresponding to certain plasma tangency radii. During the development of the design and location of these CCRs, several iterations of neutronics analyses were performed to determine and minimize the total distortion due to nuclear heating of the CCRs. The CCR corresponding to TIP Channel 2 was chosen for analysis as a good middle-road case, being an average distance from the plasma (of the five channels) and having moderate neutron shielding from its blanket shield housing. Results show that Channel 2 meets the requirements of the TIP Diagnostic, but barely. These results suggest other CCRs might be at risk of exceeding thermal deformation due to nuclear heating.

  14. Turning the Corner on Hanford Tank Waste Cleanup-From Safe Storage to Closure

    SciTech Connect (OSTI)

    Boston, H. L.; Cruz, E. J.; Coleman, S. J.

    2002-02-25

    The U.S. Department of Energy (DOE), Office of River Protection (ORP) is leading the River Protection Project (RPP) which is responsible for the disposition of 204,000 cubic meters (54 million gallons) of high-level radioactive waste that have accumulated in large underground tanks at the Hanford Site since 1944. ORP continues to make good progress on improving the capability to treat Hanford tank waste. Design of the waste vitrification facilities is proceeding well and construction will begin within the next year. Progress is also being made in reducing risk to the worker and the environment from the waste currently stored in the tank farms. Removal of liquids from single-shell tanks (SSTs) is on schedule and we will begin removing solids (salt cake) from a tank (241-U-107) in 2002. There is a sound technical foundation for the waste vitrification facilities. These initial facilities will be capable of treating (vitrifying) the bulk of Hanford tank waste and are the corners tone of the clean-up strategy. ORP recognizes that as the near-term work is performed, it is vital that there be an equally strong and defensible plan for completing the mission. ORP is proceeding on a three-pronged approach for moving the mission forward. First, ORP will continue to work aggressively to complete the waste vitrification facilities. ORP intends to provide the most capable and robust facilities to maximize the amount of waste treated by these initial facilities by 2028 (regulatory commitment for completion of waste treatment). Second, and in parallel with completing the waste vitrification facilities, ORP is beginning to consider how best to match the hazard of the waste to the disposal strategy. The final piece of our strategy is to continue to move forward with actions to reduce risk in the tank farms and complete cleanup.

  15. Air Gaps, Size Effect, and Corner-Turning in Ambient LX-17

    SciTech Connect (OSTI)

    Souers, P C; Hernandez, A; Cabacungen, C; Fried, L; Garza, R; Glaesemann, K; Lauderbach, L; Liao, S; Vitello, P

    2007-05-30

    Various ambient measurements are presented for LX-17. The size (diameter) effect has been measured with copper and Lucite confinement, where the failure radii are 4.0 and 6.5 mm, respectively. The air well corner-turn has been measured with an LX-07 booster, and the dead-zone results are comparable to the previous TATB-boosted work. Four double cylinders have been fired, and dead zones appear in all cases. The steel-backed samples are faster than the Lucite-backed samples by 0.6 {micro}s. Bare LX-07 and LX-17 of 12.7 mm-radius were fired with air gaps. Long acceptor regions were used to truly determine if detonation occurred or not. The LX-07 crossed at 10 mm with a slight time delay. Steady state LX-17 crossed at 3.5 mm gap but failed to cross at 4.0 mm. LX-17 with a 12.7 mm run after the booster crossed a 1.5 mm gap but failed to cross 2.5 mm. Timing delays were measured where the detonation crossed the gaps. The Tarantula model is introduced as embedded in the Linked Cheetah V4.0 reactive flow code at 4 zones/mm. Tarantula has four pressure regions: off, initiation, failure and detonation. A report card of 25 tests run with the same settings on LX-17 is shown, possibly the most extensive simultaneous calibration yet tried with an explosive. The physical basis of some of the input parameters is considered.

  16. Hand portable thin-layer chromatography system

    DOE Patents [OSTI]

    Haas, Jeffrey S.; Kelly, Fredrick R.; Bushman, John F.; Wiefel, Michael H.; Jensen, Wayne A.

    2000-01-01

    A hand portable, field-deployable thin-layer chromatography (TLC) unit and a hand portable, battery-operated unit for development, illumination, and data acquisition of the TLC plates contain many miniaturized features that permit a large number of samples to be processed efficiently. The TLC unit includes a solvent tank, a holder for TLC plates, and a variety of tool chambers for storing TLC plates, solvent, and pipettes. After processing in the TLC unit, a TLC plate is positioned in a collapsible illumination box, where the box and a CCD camera are optically aligned for optimal pixel resolution of the CCD images of the TLC plate. The TLC system includes an improved development chamber for chemical development of TLC plates that prevents solvent overflow.

  17. Tools Hands-on Judit Gimenez

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tools Hands-on Judit Gimenez judit@bsc.es NERSC - Berkeley, August 2016 www.bsc.es Getting a trace with Extrae 3 Extrae features Parallel programming models - MPI, OpenMP(*), pthreads, OmpSs, CUDA, OpenCL, Java, Python... Platforms - Intel, Cray, BlueGene,, Fujitsu Sparc, Xeon Phi,, ARM, Android... Performance Counters - Using PAPI Link to source code - Callstack at MPI routines - OpenMP outlined routines - Selected user functions (Dyninst) Periodic sampling User events (Extrae API) No need to

  18. Effects of the shape of the foil corners on the irradiation performance of U10Mo alloy based monolithic mini-plates

    SciTech Connect (OSTI)

    Ozaltun, Hakan; Medvedev, Pavel G

    2015-06-01

    Monolithic plate-type fuel is a fuel form being developed for high performance research and test reactors to minimize the use of enriched material. These fuel elements are comprised of a high density, low enrichment, U-Mo alloy based fuel foil, sandwiched between Zirconium liners and encapsulated in Aluminum cladding. The use of a high density fuel in a foil form presents a number of fabrication and operational concerns, such as: foil centering, flatness of the foil, fuel thickness variation, geometrical tilting, foil corner shape etc. To benchmark this new design, effects of various geometrical and operational variables on irradiation performance have been evaluated. As a part of these series of sensitivity studies, the shape of the foil corners were studied. To understand the effects of the corner shapes of the foil on thermo-mechanical performance of the plates, a behavioral model was developed for a selected plate from RERTR-12 experiments (Plate L1P785). Both fabrication and irradiation processes were simulated. Once the thermo-mechanical behavior the plate is understood for the nominal case, the simulations were repeated for two additional corner shapes to observe the changes in temperature, displacement and stress-strain fields. The results from the fabrication simulations indicated that the foil corners do not alter the post-fabrication stress-strain magnitudes. Furthermore, the irradiation simulations revealed that post-fabrication stresses of the foil would be relieved very quickly in operation. While, foils with chamfered and filleted corners yielded stresses with comparable magnitudes, they are slightly lower in magnitudes, and provided a more favorable mechanical response compared with the foil with sharp corners.

  19. 2,"Four Corners","Coal","Arizona Public Service Co",1540

    U.S. Energy Information Administration (EIA) Indexed Site

    Mexico" ,"Plant","Primary energy source","Operating company","Net summer capacity (MW)" 1,"San Juan","Coal","Public Service Co of NM",1684 2,"Four Corners","Coal","Arizona Public Service Co",1540 3,"Hobbs Generating Station","Natural gas","CAMS NM LLC",567.9 4,"Luna Energy Facility","Natural gas","Public Service Co of NM",559

  20. WWSmoblieHand.jpg | OSTI, US Dept of Energy Office of Scientific and

    Office of Scientific and Technical Information (OSTI)

    Technical Information WWSmoblieHand

  1. Figure 4 (left).jpg | OSTI, US Dept of Energy Office of Scientific and

    Office of Scientific and Technical Information (OSTI)

    Technical Information 4 (left).jpg

  2. Intelligent hand-portable proliferation sensing system

    SciTech Connect (OSTI)

    Dieckman, S.L.; Bostrom, G.A.; Waterfield, L.G.; Jendrzejczyk, J.A.; Ahuja, S.; Raptis, A.C.

    1997-08-01

    Argonne National Laboratory, with support from DOE`s Office of Nonproliferation and National Security, is currently developing an intelligent hand-portable sensor system. This system is designed specifically to support the intelligence community with the task of in-field sensing of nuclear proliferation and related activities. Based upon pulsed laser photo-ionization time-of-flight mass spectrometry technology, this novel sensing system is capable of quickly providing a molecular or atomic analysis of specimens. The system is capable of analyzing virtually any gas phase molecule, or molecule that can be induced into the gas phase by (for example) sample heating. This system has the unique advantages of providing unprecedented portability, excellent sensitivity, tremendous fieldability, and a high performance/cost ratio. The system will be capable of operating in a highly automated manner for on-site inspections, and easily modified for other applications such as perimeter monitoring aboard a plane or drone. The paper describes the sensing system.

  3. Climate change in the four corners and adjacent regions: Implications for environmental restoration and land-use planning

    SciTech Connect (OSTI)

    Waugh, W.J.

    1995-09-01

    This document contains the workshop proceedings on Climate Change in the Four Corners and Adjacent Regions: Implications for Environmental Restoration and Land-Use Planning which took place September 12-14, 1994 in Grand Junction, Colorado. The workshop addressed three ways we can use paleoenvironmental data to gain a better understanding of climate change and its effects. (1) To serve as a retrospective baseline for interpreting past and projecting future climate-induced environmental change, (2) To differentiate the influences of climate and humans on past environmental change, and (3) To improve ecosystem management and restoration practices in the future. The papers presented at this workshop contained information on the following subjects: Paleoclimatic data from the Pleistocene and Holocene epochs, climate change and past cultures, and ecological resources and environmental restoration. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  4. NNSA conducts hands-on radiation medical training in Taiwan ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    hands-on radiation medical training in Taiwan | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing...

  5. 2016 CIG (Computational Infrastructure for Geodynamics) All Hands...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2016 CIG (Computational Infrastructure for Geodynamics) All Hands Meeting Start Date: Jun 17 2016 (All day) to Jun 24 2016 (All day) Location: UC Davis Event Website: https:...

  6. Hand-Held Analyzer Quickly Detects Buried Human Remains - Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hand-Held Analyzer Quickly Detects Buried Human Remains Oak Ridge National Laboratory ... and auditory cues to quickly alert investigators to the presence of buried human remains. ...

  7. Search for heavy neutrinos and W bosons with right-handed couplings in proton-proton collisions at $\\sqrt{s} = 8$ TeV

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Khachatryan, Vardan

    2014-11-26

    A search for heavy, right-handed neutrinos, N? (?=e,?), and right-handed WR bosons, which arise in the left-right symmetric extensions of the standard model, has been performed by the CMS experiment. The search was based on a sample of two lepton plus two jet events collected in protonproton collisions at a center-of-mass energy of 8TeV corresponding to an integrated luminosity of 19.7 fb?1. For models with strict left-right symmetry, and assuming only one N? flavor contributes significantly to the WR decay width, the region in the two-dimensional (MWR,MN?) mass plane excluded at a 95 % confidence level extends to approximately MWR=3.0TeVmoreand covers a large range of neutrino masses below the WR boson mass, depending on the value of MWR. This search significantly extends the (MWR,MN?) exclusion region beyond previous results.less

  8. 2014 LM All-Hands Training | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2014 LM All-Hands Training 2014 LM All-Hands Training October 15, 2014 - 11:41am Addthis What does this project do? Goal 5. Sustain management excellence. The U.S. Department of Energy (DOE) Office of Legacy Management (LM) 2014 All-Hands Training was held the week of July 28, 2014, in Albuquerque, New Mexico. The week included presentations from LM staff and managers, a trip to the National Museum of Nuclear Science & History, teamwork and personal development training, as well as site

  9. Lending a Hand | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lending a Hand Lending a Hand Y-12 volunteers at the Shelter Animal Rescue Group spent time bathing and grooming dogs. SARG is dedicated to giving animals from the Oak Ridge Animal Shelter a second chance at life. Each year, employees nominate projects for the Y-12 Day of Volunteering. Employees volunteer to lend a hand and Y-12 provides support. In 2012, more than 1,100 employees, their family members and other volunteers worked on 60 projects, marking the largest turnout in the 10 years of

  10. Aberrant Left Inferior Bronchial Artery Originating from the Left Gastric Artery in a Patient with Acute Massive Hemoptysis

    SciTech Connect (OSTI)

    Jiang, Sen Sun, Xi-Wen Yu, Dong Jie, Bing

    2013-10-15

    Massive hemoptysis is a life-threatening condition, and the major source of bleeding in this condition is the bronchial circulation. Bronchial artery embolization is a safe and effective treatment for controlling hemoptysis. However, the sites of origin of the bronchial arteries (BAs) have numerous anatomical variations, which can result in a technical challenge to identify a bleeding artery. We present a rare case of a left inferior BA that originated from the left gastric artery in a patient with recurrent massive hemoptysis caused by bronchiectasis. The aberrant BA was embolized, and hemoptysis has been controlled for 8 months.

  11. All Hands 2016 Poster Submissions | Photosynthetic Antenna Research...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    year's All Hands Meeting on June 21-22, 2016, please fill out the webform below to reserve your space by JUNE 1. If you have any questions, please contact Erin Plut for more info. ...

  12. All Hands 2016 Speakers | Photosynthetic Antenna Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hands Meeting on June 21-22, 2016, please fill out the webform below to reserve your space by JUNE 1. If you have any questions, please contact Kaslina Love Mosley for more info. ...

  13. Hands-on environmental stewardship deepens Erica Garcia, civil engineer,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    experience Hands-on environmental stewardship deepens student experience Hands-on environmental stewardship deepens Erica Garcia, civil engineer, experience Civil engineer undergraduate spends time in the field sampling water quality for the Lab. July 17, 2012 image description Erica Garcia, an undergraduate student, draws from her past while working on water quality with the Lab's Environmental Protection group. She currently assists with National Pollutant Discharge Elimination System

  14. Internships Help Future Energy Leaders Gain Hands-On Experience |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Internships Help Future Energy Leaders Gain Hands-On Experience Internships Help Future Energy Leaders Gain Hands-On Experience August 23, 2013 - 10:19am Addthis EM Office of External Affairs Acting Communications Director Dave Borak talks with EM intern Valerie Edwards. | Photo courtesy of the Energy Department. EM Office of External Affairs Acting Communications Director Dave Borak talks with EM intern Valerie Edwards. | Photo courtesy of the Energy Department. Rebecca

  15. Left-handed properties of manganite-perovskites La{sub 1-x}Sr{sub x}MnO{sub 3} at various dopant concentrations

    SciTech Connect (OSTI)

    Belozorov, D. P.; Girich, A. A.; Tarapov, S. I.; Pogorily, A. M.; Tovstolytkin, A. I.; Belous, A. G.; Solopan, S. A.

    2014-03-15

    The experimental study of Double Negative (DNG) state of electromagnetic wave propagating in lanthanum manganite-perovskites doped with strontium La{sub 1-x}Sr{sub x}MnO{sub 3} is provided firstly below individual Curie temperatures (in ferromagnetic metal state (FM) for La{sub 1-x}Sr{sub x}MnO{sub 3}). Various dopant concentrations are considered for ceramic specimens: x = 0.15;??0.225;??0.3;??0.45;??0.6. It is shown that dependence of the DNG-peak intensity on dopant concentration is sharply non-monotone with maximum at the dopant concentrations x = 0.225 0.3. This behaviour follows the change of Curie temperature with increase of dopant concentration in such substances. The obtained dependence of DNG peak intensity supports the opinion concerning the role of disorder in highly doped manganite-perovskite magnetic ceramics under study.

  16. Innovative tailgate support for heavy ground: 11 left longwall panel, Cyprus Shoshone Mine

    SciTech Connect (OSTI)

    Woomer, C.C.; Stewart, C.

    1995-11-01

    Cyprus Shoshone Mines uses the longwall method to extract a deep, thick, pitching coal seam in the Hanna Basin of South Central Wyoming. The immediate, and main roof rock consists of weak, thinly-bedded, silty mudstones with weak, interbedded fine-to medium-grained sandstone. Tailgate ground control has been a critical factor impacting productivity at the mine. A gateroad condition mapping program for the 11 left longwall gateroads indicated potentially severe ground control problems for the tailgate. It was predicted that the existing, secondary support pattern of wood cribs would not provide adequate support capacity. Longwall coordinators and engineers made the decision to use a low density, pumpable cement known to the industry as Tekseal{trademark}, to provide the system required. A 200 psi ultimate strength mix was decided on to provide the required load capacity. The existing cribs were formed with 1-in. by 6-in. boards and brattice cloth to provide the containment. To overcome the access limitations, three boreholes were drilled from the surface to the tailgate on 2,000-ft centers. A mobile pumping station was established on the surface and the Tekseal{trademark} was pumped 900-ft. down the boreholes through a 1.5-in. steep pipe, then as much as 1,800-ft. along the tailgate entry through 1.25-in. miner spray hose. The materials required for the Tekseal{trademark} supports could all be carried into the construction locations by hand. As a direct result of incorporating relatively new methods of pumping high yield, low density, cementitious grout, the Shoshone Mine reduced downtime due to tailgate ground control problems by approximately 70% in comparison with previous longwall panels. The longwall set three monthly production records while mining the 11 left longwall under the deepest cover, steepest pitch, and most extreme ground control conditions ever encountered at the mine.

  17. Left-right spin asymmetry in ? N? ? h ?

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Gamberg, Leonard; Kang, Zhong -Bo; Metz, Andreas; Pitonyak, Daniel; Prokudin, Alexei

    2014-10-01

    We consider the inclusive production of hadrons in lepton-nucleon scattering. For a transversely polarized nucleon this reaction shows a left-right azimuthal asymmetry, which we compute in twist-3 collinear factorization at leading order in perturbation theory. All non-perturbative parton correlators of the calculation are fixed through information from other hard processes. Our results for the left-right asymmetry agree in sign with recent data for charged pion production from the HERMES Collaboration and from Jefferson Lab. However, the magnitude of the computed asymmetries tends to be larger than the data. Potential reasons for this outcome are identified. We also give predictions formorefuture experiments and highlight in particular the unique opportunities at an Electron Ion Collider.less

  18. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cabling and conductor fabrication are now underway in New Hampshire and Florida for the niobium-tin wire produced in the US. All of this fabrication effort is in preparation for ...

  19. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cryogenic deuterium machine gun corrals edgy plasma Cryogenic deuterium machine gun corrals edgy plasma -Agatha Bardoel Published May 3, 2012 Cryogenic deuterium machine gun Internal image of the three-barrel repeating pneumatic deuterium pellet injector used on DIII-D for pellet ELM pacing experiments. Photo: US ITER/ORNL Using a cryogenic deuterium pellet injector installed on the DIII-D tokamak operated for the Department of Energy Office of Science by General Atomics in San Diego, ORNL

  20. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mitigating plasma disruptions in ITER Mitigating plasma disruptions in ITER Using large cryogenic pellets, US ITER advances new fusion technology -Lynne Degitz Published September 18, 2014 A three-barrel pellet injector developed at Oak Ridge National Laboratory for the ITER disruption mitigation system. Photo: US ITER/ORNL. A three-barrel pellet injector developed at Oak Ridge National Laboratory for the ITER disruption mitigation system. Photo: US ITER/ORNL The international ITER fusion

  1. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Jacob's Room at US ITER Fusion Comes to the Secret City Published June 20, 2011 The ... Over 1000 visitors toured the exhibits and learned more about fusion, ITER progress, and ...

  2. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    US ITER preps for high performance plasma heating US ITER preps for high performance plasma heating New test results and innovations advance ion cyclotron high power transmission ...

  3. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    fabrication of early delivery components for ITER advances US fabrication of early delivery components for ITER advances Delivery of tokamak cooling water system drain tanks will ...

  4. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Schedule Concerns Delay ITER's Go-Ahead Science Magazine, November 27, 2009 ITER council delays project Physics Today, November 20, 2009 ITER Blueprints Near Completion, But ...

  5. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fact Sheets Fact Sheets Hydrogen Fusion ITER Project US ITER Progress US ITER Participants US ITER Participants Pin Map US ITER Hardware: Central Solenoid (CS) Tokamak Cooling ...

  6. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Subscribe to the US ITER Newsletter Need an Expert? Media are welcome to contact Mark Uhran for assistance in reaching an appropriate US ITER expert. US ITER staff members are also ...

  7. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Neutronics at Wisconsin, ORNL advances ITER shielding and international collaboration "Neutronics" at Wisconsin, ORNL advances ITER shielding and international collaboration ...

  8. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Life-size Mock-Up Helps R&D Staff Get a Feel for the Scale of ITER Life-size Mock-Up Helps R&D Staff Get a Feel for the Scale of ITER -Agatha Bardoel Published October 7, 2011 A ...

  9. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building the heartbeat of ITER Building the heartbeat of ITER US ITER prepares for the fabrication of the international fusion reactor's central solenoid -Lynne Degitz Published ...

  10. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Photo: US ITER. The first part of the central solenoid winding station is a de-spooler, shown here unwinding material for the mock-up coil. Photo: US ITER . At the heart of the ...

  11. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    This visualization demonstrates how the ITER reactor will create a burning plasma. ... Tokamak Complex- April 2012 An overview of construction progress for the ITER tokmak ...

  12. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    US ITER ships 30,000 pounds of magnet system hardware to Europe US ITER ships 30,000 pounds of magnet system hardware to Europe An 800-meter length of sample toroidal field ...

  13. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    US ITER Major Vendors, Project Director to Speak at FPA Annual Meeting US ITER Major Vendors, Project Director to Speak at FPA Annual Meeting in December Published September 28, ...

  14. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Videos US ITER Moving Forward US ITER Moving Forward (2012) Ned Sauthoff and Susan McGinnis - Fusion Reaction Energy for the Future (2011) Ned Sauthoff and Susan McGinnis - Fusion ...

  15. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    US ITER is building one of the world's largest and most powerful electromagnets to energize the ITER tokamak, a device that confines plasma in the shape of a doughnut. The 13 meter ...

  16. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Neutron Science Division, November 22, 2006 US ITER Project Completes Management Team ORNL News Release, August 17, 2006 US ITER Project Office, a partnership of Princeton ...

  17. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    advantages for US ITER engineers Desktop additive printers are changing the engineering design process 3D printing yields advantages for US ITER engineers Desktop additive ...

  18. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Testing Central Solenoid Structural Integrity Key steps forward for US ITER magnet efforts ... vessel will be used in testing methods for sealing and insulating ITER magnet modules. ...

  19. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Service, January 4, 2007 Head of US ITER project named IEEE Fellow ORNL News ... Power IBM press release, July 2, 2007 ITER Selects ANSYS Solutions for Design of ...

  20. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Division Management in Place at US ITER New Division Management in Place at US ITER Published September 20, 2011 After an extensive international search, US ITER selected John ...

  1. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    develop high-performance steel for ITER The Oak Ridger, November 2, 2008 Can ... News Sentinel, July 29, 2008 Fund ITER Now EnergyBiz Magazine, July 21, 2008 ...

  2. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    test bed ring will load ITER transmission lines with up to 6 megawatts New test bed ring will load ITER transmission lines with up to 6 megawatts -Agatha Bardoel Published April ...

  3. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Jacob's Room at US ITER In Jacob's Room at US ITER College Student Models, Simulates and Designs a Cooling Subsystem for the ITER Tokamak -Agatha Bardoel Published June 24, 2011 ...

  4. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Bardoel Published February 22, 2012 US ITER Toridal Field Coil Conductor US ITER toroidal field coil conductor production requires miles of niobium-tin superconducting wire. ...

  5. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Procurement Arrangement Signed for Low Field Side Reflectometer Diagnostic -Agatha Bardoel Published June 21, 2012 US ITER Project Manger Ned Sauthoff and ITER Director-General ...

  6. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    India DA Project Director Visits US ITER Project Office India DA Project Director Visits US ITER Project Office Published Janaury 5, 2012 India DA Project Director Visits US ITER ...

  7. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    UT Magnet Lab Advances US ITER and Next Generation of Engineers, Scientists UT Magnet Lab Advances US ITER and Next Generation of Engineers, Scientists -Agatha Bardoel Published ...

  8. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    To produce the pellets, researchers developed a twin-screw extruder which shapes a ... needed to supply a few seconds of fuel pellets at a time, but the ITER tokamak will ...

  9. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    reactor will be fed a fuel of frozen pellets of deuterium-tritium, fired into the ... The pellets are made of deuterium and tritium, isotopes of hydrogen that are frozen at 11 ...

  10. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for fueling, using 5.3 mm pellets; the other is for controlling the density at the edge of the plasma boundary by injecting relatively small pellets to produce small edge ...

  11. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Massive gas injection quickly injects gases such as neon or argon into the plasma. Shattered pellet injection uses wine cork-sized cryogenic pellets, mostly of neon and deuterium, ...

  12. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A port plug integration proposal developed with the US ITER diagnostics team has helped the international ITER collaboration arrive at a clever solution for safely housing all of ...

  13. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Central solenoid insert coil confirms conductor readiness for ITER Central solenoid insert coil confirms conductor readiness for ITER Central solenoid insert coil confirms conductor readiness for ITER -Lynne Degitz Published August 13, 2015 The insert coil being lowered into the test facility at Naka, Japan. The insert coil being lowered into the test facility at Naka, Japan. Photo: JAEA In another step towards building the ITER fusion reactor, the US ITER team worked with international partners

  14. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ITER pump design benefits from testing at ORNL Spallation Neutron Source cryogenic facility ITER pump design benefits from testing at ORNL Spallation Neutron Source cryogenic facility ITER pump design benefits from testing at ORNL Spallation Neutron Source cryogenic facility -Lynne Degitz Published August 4, 2015 Robert Duckworth oversaw the testing of the 9-foot tall ITER cryoviscous compress pump prototype at the Spallation Neutron Source cryogenic test facility. Photo: US ITER/ORNL. Robert

  15. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    US delivers multiple "firsts" for ITER site US delivers multiple "firsts" for ITER site Conductor for toroidal field magnets, drain tanks and electrical components are being delivered to Europe for installation at the ITER site -Lynne Degitz March 19, 2015 Conductor for toroidal field magnets A close-up view of toroidal field production conductor. The conductor delivered in January is approximately 800 meters in length. Photo: US ITER As the international ITER magnetic fusion

  16. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fusion diagnostics heat up across the US Fusion diagnostics heat up across the US Teams are developing tools to monitor and control ITER plasma -Lynne Degitz October 22, 2015 ITER, the world's largest tokamak now under construction in France, will have over 60 diagnostic systems installed to enable plasma control, optimize plasma performance, and support machine protection¬. Princeton Plasma Physics Laboratory and Oak Ridge National Laboratory, in collaboration with industry and universities,

  17. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building the Heartbeat of ITER Building the Heartbeat of ITER Preparing a unique fabrication line for the central solenoid modules -Lynne Degitz September 14, 2015 A partial view of the General Atomics module fabrication line, with two winding station tables visible behind a yellow rail. Photo: GA A partial view of the General Atomics module fabrication line, with two winding station tables visible behind a yellow rail. Photo: GA With winding of the first production module for ITER's central

  18. Hand held phase-shifting diffraction Moire interferometer

    DOE Patents [OSTI]

    Deason, V.A.; Ward, M.B.

    1994-09-20

    An interferometer is described in which a coherent beam of light is generated within a remote case and transmitted to a hand held unit tethered to said remote case, said hand held unit having optical elements for directing a pair of mutually coherent collimated laser beams at a diffraction grating. Data from the secondary or diffracted beams are then transmitted to a separate video and data acquisition system for recording and analysis for load induced deformation or for identification purposes. Means are also provided for shifting the phase of one incident beam relative to the other incident beam and being controlled from within said remote case. 4 figs.

  19. Hand held phase-shifting diffraction moire interferometer

    DOE Patents [OSTI]

    Deason, Vance A.; Ward, Michael B.

    1994-01-01

    An interferometer in which a coherent beam of light is generated within a remote case and transmitted to a hand held unit tethered to said remote case, said hand held unit having optical elements for directing a pair of mutually coherent collimated laser beams at a diffraction grating. Data from the secondary or diffracted beams are then transmitted to a separate video and data acquisition system for recording and analysis for load induced deformation or for identification purposes. Means are also provided for shifting the phase of one incident beam relative to the other incident beam and being controlled from within said remote case.

  20. Reconciling BICEP2 and Planck results with right-handed Dirac neutrinos in the fundamental representation of grand unified E{sub 6}

    SciTech Connect (OSTI)

    Anchordoqui, Luis A.; Goldberg, Haim; Huang, Xing; Vlcek, Brian J.

    2014-06-17

    The tensor-to-scalar ratio (r=0.20{sub −0.05}{sup +0.07}) inferred from the excess B-mode power observed by the Background Imaging of Cosmic Extragalactic Polarization (BICEP2) experiment is almost twice as large as the 95% CL upper limits derived from temperature measurements of the WMAP (r<0.13) and Planck (r<0.11) space missions. Very recently, it was suggested that additional relativistic degrees of freedom beyond the three active neutrinos and photons can help to relieve this tension: the data favor an effective number of light neutrino species N{sub eff}=3.86±0.25. Since the BICEP2 ratio implies the energy scale of inflation (V{sub ∗}{sup 1/4}∼2×10{sup 16} GeV) is comparable to the grand unification scale, in this paper we investigate whether we can accommodate the required N{sub eff} with three right-handed (partners of the left-handed standard model) neutrinos living in the fundamental representation of a grand unified exceptional E{sub 6} group. We show that the superweak interactions of these Dirac states (through their coupling to a TeV-scale Z{sup ′} gauge boson) lead to decoupling of right-handed neutrino just above the QCD cross over transition: 175 MeV≲T{sub ν{sub R}{sup dec}}≲250 MeV. For decoupling in this transition region, the contribution of the three right-handed neutrinos to N{sub eff} is suppressed by heating of the left-handed neutrinos (and photons). Consistency (within 1σ) with the favored N{sub eff} is achieved for 4.5 TeV

  1. Tribal Energy Projects Benefit from Hands-On Technical Support

    Broader source: Energy.gov [DOE]

    This fall the Office of Indian Energy has provided various Tribes and Alaska Native Villages with unbiased on-site technical support on potential energy projects, as well as hands-on assistance implementing solutions to a wide range of energy and environmental challenges.

  2. Arkansas Students Get Their Hands Dirty in Solar Panel Project

    Broader source: Energy.gov [DOE]

    Wallie Shaw remembers where he got the idea to do a hands-on solar panel project for his Jobs for America’s Graduates (JAG) students, a school-to-work transition program focused on helping at-risk youth graduate from high school.

  3. Experimental observation of left polarized wave absorption near electron cyclotron resonance frequency in helicon antenna produced plasma

    SciTech Connect (OSTI)

    Barada, Kshitish K.; Chattopadhyay, P. K.; Ghosh, J.; Kumar, Sunil; Saxena, Y. C.

    2013-01-15

    Asymmetry in density peaks on either side of an m = +1 half helical antenna is observed both in terms of peak position and its magnitude with respect to magnetic field variation in a linear helicon plasma device [Barada et al., Rev. Sci. Instrum. 83, 063501 (2012)]. The plasma is produced by powering the m = +1 half helical antenna with a 2.5 kW, 13.56 MHz radio frequency source. During low magnetic field (B < 100 G) operation, plasma density peaks are observed at critical magnetic fields on either side of the antenna. However, the density peaks occurred at different critical magnetic fields on both sides of antenna. Depending upon the direction of the magnetic field, in the m = +1 propagation side, the main density peak has been observed around 30 G of magnetic field. On this side, the density peak around 5 G corresponding to electron cyclotron resonance (ECR) is not very pronounced, whereas in the m = -1 propagation side, very pronounced ECR peak has been observed around 5 G. Another prominent density peak around 12 G has also been observed in m = -1 side. However, no peak has been observed around 30 G on this m = -1 side. This asymmetry in the results on both sides is explained on the basis of polarization reversal of left hand polarized waves to right hand polarized waves and vice versa in a bounded plasma system. The density peaking phenomena are likely to be caused by obliquely propagating helicon waves at the resonance cone boundary.

  4. User interface for a tele-operated robotic hand system

    SciTech Connect (OSTI)

    Crawford, Anthony L

    2015-03-24

    Disclosed here is a user interface for a robotic hand. The user interface anchors a user's palm in a relatively stationary position and determines various angles of interest necessary for a user's finger to achieve a specific fingertip location. The user interface additionally conducts a calibration procedure to determine the user's applicable physiological dimensions. The user interface uses the applicable physiological dimensions and the specific fingertip location, and treats the user's finger as a two link three degree-of-freedom serial linkage in order to determine the angles of interest. The user interface communicates the angles of interest to a gripping-type end effector which closely mimics the range of motion and proportions of a human hand. The user interface requires minimal contact with the operator and provides distinct advantages in terms of available dexterity, work space flexibility, and adaptability to different users.

  5. Hand and shoe monitor using air ionization probes

    DOE Patents [OSTI]

    Fergus, Richard W.

    1981-01-01

    A hand and shoe radiation monitor is provided which includes a probe support body defining a plurality of cells, within each cell there being an ionization probe. The support body provides structural strength for protecting the ionization probes from force applied to the support body during a radiation monitoring event. There is also provided a fast response time amplifier circuit for the output from the ionization probes.

  6. Hadoop Hands-On Exercises Lawrence Berkeley National Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hadoop Hands-On Exercises Lawrence Berkeley National Lab Oct 2011 We will ... Training accounts/User Agreement forms Test access to carver HDFS commands Monitoring Run the word count example Simple streaming with Unix commands Streaming with simple scripts Streaming "Census" example Pig Examples Additional Exercises 2 Instructions http://tinyurl.com/nerschadoopoct 3 Login and Environment ssh [username]@carver.nersc.gov echo $SHELL - should be bash 4 Remote Participants Visit:

  7. Hand held data collection and monitoring system for nuclear facilities

    DOE Patents [OSTI]

    Brayton, D.D.; Scharold, P.G.; Thornton, M.W.; Marquez, D.L.

    1999-01-26

    Apparatus and method is disclosed for a data collection and monitoring system that utilizes a pen based hand held computer unit which has contained therein interaction software that allows the user to review maintenance procedures, collect data, compare data with historical trends and safety limits, and input new information at various collection sites. The system has a means to allow automatic transfer of the collected data to a main computer data base for further review, reporting, and distribution purposes and uploading updated collection and maintenance procedures. The hand held computer has a running to-do list so sample collection and other general tasks, such as housekeeping are automatically scheduled for timely completion. A done list helps users to keep track of all completed tasks. The built-in check list assures that work process will meet the applicable processes and procedures. Users can hand write comments or drawings with an electronic pen that allows the users to directly interface information on the screen. 15 figs.

  8. Hand held data collection and monitoring system for nuclear facilities

    DOE Patents [OSTI]

    Brayton, Darryl D.; Scharold, Paul G.; Thornton, Michael W.; Marquez, Diana L.

    1999-01-01

    Apparatus and method is disclosed for a data collection and monitoring system that utilizes a pen based hand held computer unit which has contained therein interaction software that allows the user to review maintenance procedures, collect data, compare data with historical trends and safety limits, and input new information at various collection sites. The system has a means to allow automatic transfer of the collected data to a main computer data base for further review, reporting, and distribution purposes and uploading updated collection and maintenance procedures. The hand held computer has a running to-do list so sample collection and other general tasks, such as housekeeping are automatically scheduled for timely completion. A done list helps users to keep track of all completed tasks. The built-in check list assures that work process will meet the applicable processes and procedures. Users can hand write comments or drawings with an electronic pen that allows the users to directly interface information on the screen.

  9. Transjugular Intrahepatic Porto-Systemic Shunt Placement in a Patient with Left-Lateral Split-Liver Transplant and Mesenterico-Left Portal Vein by Pass Placement

    SciTech Connect (OSTI)

    Miraglia, Roberto Maruzzelli, Luigi; Luca, Angelo

    2011-12-15

    This is a report of a successful placement of a transjugular intrahepatic porto-systemic shunt in a young patient with previous left-lateral, split-liver transplant and mesenterico-left portal vein by pass placement after posttransplant extrahepatic portal vein thrombosis.

  10. Extending the eigCG algorithm to nonsymmetric Lanczos for linear systems with multiple right-hand sides

    SciTech Connect (OSTI)

    Abdel-Rehim, A M; Stathopoulos, Andreas; Orginos, Kostas

    2014-08-01

    The technique that was used to build the EigCG algorithm for sparse symmetric linear systems is extended to the nonsymmetric case using the BiCG algorithm. We show that, similarly to the symmetric case, we can build an algorithm that is capable of computing a few smallest magnitude eigenvalues and their corresponding left and right eigenvectors of a nonsymmetric matrix using only a small window of the BiCG residuals while simultaneously solving a linear system with that matrix. For a system with multiple right-hand sides, we give an algorithm that computes incrementally more eigenvalues while solving the first few systems and then uses the computed eigenvectors to deflate BiCGStab for the remaining systems. Our experiments on various test problems, including Lattice QCD, show the remarkable ability of EigBiCG to compute spectral approximations with accuracy comparable to that of the unrestarted, nonsymmetric Lanczos. Furthermore, our incremental EigBiCG followed by appropriately restarted and deflated BiCGStab provides a competitive method for systems with multiple right-hand sides.

  11. Hand-held portable microarray reader for biodetection

    DOE Patents [OSTI]

    Thompson, Deanna Lynn; Coleman, Matthew A; Lane, Stephen M; Matthews, Dennis L; Albala, Joanna; Wachsmann-Hogiu, Sebastian

    2013-04-23

    A hand-held portable microarray reader for biodetection includes a microarray reader engineered to be small enough for portable applications. The invention includes a high-powered light-emitting diode that emits excitation light, an excitation filter positioned to receive the excitation light, a slide, a slide holder assembly for positioning the slide to receive the excitation light from the excitation filter, an emission filter positioned to receive the excitation light from the slide, a lens positioned to receive the excitation light from the emission filter, and a CCD camera positioned to receive the excitation light from the lens.

  12. Evaluation of Steelhead Kelt Passage into the Bonneville Dam Second Powerhouse Corner Collector Prior to the Juvenile Migration Seasons, 2007 and 2008

    SciTech Connect (OSTI)

    Weiland, Mark A.; Kim, Jina; Nagy, William T.; Johnson, Gary E.

    2009-09-01

    This report documents the results of a steelhead kelt passage study conducted by the PNNL for the U.S. Army Corps of Engineers at Bonneville Dam in early spring 2007 and 2008. At the Second Powerhouse, a surface flow outlet called the corner collector (B2CC) may be an effective non-turbine passage route for steelhead kelt moving downstream in early spring before the main juvenile emigration season. The goal of this project was to inform management decisions regarding B2CC operations by estimating the number of kelt using the B2CC for downstream passage at Bonneville Dam prior to the juvenile spring migration season. We performed a hydroacoustic study from March 2 to April 10, 2007 and from March 13 to April 15, 2008.

  13. Search for heavy neutrinos and W bosons with right-handed couplings in proton–proton collisions at √s = 8 TeV

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Khachatryan, Vardan

    2014-11-26

    A search for heavy, right-handed neutrinos, Nℓ (ℓ=e,μ), and right-handed WR bosons, which arise in the left-right symmetric extensions of the standard model, has been performed by the CMS experiment. The search was based on a sample of two lepton plus two jet events collected in proton–proton collisions at a center-of-mass energy of 8TeV corresponding to an integrated luminosity of 19.7 fb–1. For models with strict left-right symmetry, and assuming only one Nℓ flavor contributes significantly to the WR decay width, the region in the two-dimensional (MWR,MNℓ) mass plane excluded at a 95% confidence level extends to approximately MWR =more » 3.0TeV and covers a large range of neutrino masses below the WR boson mass, depending on the value of MWR. This search significantly extends the (MWR, MNℓ) exclusion region beyond previous results.« less

  14. Ultratrace detector for hand-held gas chromatography

    DOE Patents [OSTI]

    Andresen, Brian D.; Miller, Fred S.

    1999-01-01

    An ultratrace detector system for hand-held gas chromatography having high sensitivity, for example, to emissions generated during production of weapons, biological compounds, drugs, etc. The detector system is insensitive to water, air, helium, argon, oxygen, and C0.sub.2. The detector system is basically composed of a hand-held capillary gas chromatography (GC), an insulated heated redox-chamber, a detection chamber, and a vapor trap. For example, the detector system may use gas phase redox reactions and spectral absorption of mercury vapor. The gas chromatograph initially separates compounds that percolate through a bed of heated mercuric oxide (HgO) in a silica--or other metal--aerogel material which acts as an insulator. Compounds easily oxidized by HgO liberate atomic mercury that subsequently pass through a detection chamber which includes a detector cell, such as quartz, that is illuminated with a 254 nm ultra-violet (UV) mercury discharge lamp which generates the exact mercury absorption bands that are used to detect the liberated mercury atoms. Atomic mercury strongly absorbs 254 nm energy is therefore a specific signal for reducing compounds eluting from the capillary GC, whereafter the atomic mercury is trapped for example, in a silicon-aerogel trap.

  15. Swipe Left, Power Down: Using Interactive Media to Instill Behavior Change

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (301) | Department of Energy Swipe Left, Power Down: Using Interactive Media to Instill Behavior Change (301) Swipe Left, Power Down: Using Interactive Media to Instill Behavior Change (301) Better Buildings Residential Network Peer Exchange Call Series: Swipe Left, Power Down: Using Interactive Media to Instill Behavior Change (301), call slides and discussion summary. Call Slides and Discussion Summary (2.54 MB) More Documents & Publications Using Mobile Applications to Generate

  16. xLPR Hands-on workshop. (Conference) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    xLPR Hands-on workshop. Citation Details In-Document Search Title: xLPR Hands-on workshop. You are accessing a document from the Department of Energy's (DOE) SciTech Connect. ...

  17. DOE Zero Energy Ready Home Case Study: Hammer and Hand, Pumpkin...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hammer and Hand, Pumpkin Ridge Passive House, North Plains, OR DOE Zero Energy Ready Home Case Study: Hammer and Hand, Pumpkin Ridge Passive House, North Plains, OR Case study of a ...

  18. Developing hands-on ergonomics lessons for youth

    SciTech Connect (OSTI)

    Bennett, C; Alexandre, M; Jacobs, K

    2006-02-22

    By the time students are ready to enter the workforce they have been exposed to up to 20 years of ergonomics risk factors. As technology evolves, it provides more opportunities for intensive repetitive motion and with computers, cell phones, personal digital assistants (PDAs), and electronic games. The average student engages in fewer active physical activities, sit stationary in mismatched furniture in schools for hours and carry heavy backpacks. While long-term effects remain to be identified, increasingly ergonomists and others concerned with musculoskeletal health and wellness, see a need for early ergonomics education. This interactive session provides a hands-on approach to introducing ergonomics to students. Although different approaches may effectively introduce ergonomics at even early stages of development, this program was designed for youth at the middle to high school age. Attendees will participate in four activities designed to introduce ergonomics at an experiential level. The modules focus on grip strength, effective breathing, optimizing your chair, and backpack safety. The workshop will include presentation and worksheets designed for use by teachers with minimal ergonomics training. Feedback from the participants will be sought for further refining the usability and safety of the training package.

  19. Systems Analysis Programs for Hands-On Integrated Reliability Evaluations.

    Energy Science and Technology Software Center (OSTI)

    2014-08-01

    Version 00 The U.S. Nuclear Regulatory Commission (NRC) has developed a powerful personal computer (PC) software application for performing probabilistic risk assessments (PRAs), called Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) Version 8. Using SAPHIRE 8 on a PC, an analyst can perform a PRA for any complex system, facility, or process. Regarding nuclear power plants, SAPHIRE can be used to model a plant's response to initiating events, quantify associated core damage frequencies,more » and identify important contributors to core damage (Level 1 PRA). It can also be used to evaluate containment failure and release models for severe accident conditions, given that core damage has occurred (Level 2 PRA). It can be used for a PRA assuming that the reactor is at full power, at low power, or at shutdown conditions. Furthermore, it can be used to analyze both internal and external initiating events, and it has special features for transforming models built for internal event analysis to models for external event analysis. It can also be used in a limited manner to quantify risk for release consequences to both the public and the environment (Level 3 PRA). For all of these models, SAPHIRE can evaluate the uncertainty inherent in the probabilistic models. SAPHIRE has evolved with advances in computer technology.« less

  20. Portable Hand-Held Electrochemical Sensor for the Transuranics

    SciTech Connect (OSTI)

    Dale D. Russell, William B. Knowlton, Ph.D.; Russel Hertzog, Ph.D

    2005-11-25

    sensitive detector for uranium. Millimeter scale electrodes, operated by a hand-held instrument assembled in this lab and operated in the voltammetric mode, were transported to the DOE-Nevada test site (Las Vegas, NV) where field detection and quantitation of plutonium, uranium, and a mixture of these two elements was also demonstrated. Several probe designs were prepared, built and tested including probes with movable protective windows. A miniature, battery powered potentiostat was designed, built and demonstrated for use in a hand-held field portable instrument. This work was performed largely by undergraduates who gained valuable research experience, and many of them have continued on to graduate schools. In addition, they all gained exposure to and appreciation for national security research, in particular non-proliferation research. Four graduate students participated and one earned the MS degree on this project.

  1. Hands-on lessons in ergonomics for youth

    SciTech Connect (OSTI)

    Bennett, C; Alexandre, M; Jacobs, K

    2005-09-29

    Ergonomics risk factors apply to everybody. Numerous adults have experienced disabling injuries related to use of computers and other forms of technology. Now children are using technology even more than adults. Increasingly ergonomics risk factors are being recognized as present in the world of children. Outreach to schools and the surrounding community by employers may help protect the future work force. A growing body of researchers believe that children can benefit from the early introduction of ergonomics awareness and preventative measures. While individual representatives of the educational system may embrace the concept of introducing ergonomics into the classroom, a number of barriers can prevent implementation of integrated programs. Some of the barriers to introducing ergonomics in schools have been absence of a tie to educational standards, the existing demands on teaching hours, and the absence of easily executable lesson plans. Ergonomics is rarely included in teacher training and professional ergonomics expertise is needed for the development of a class-based program. As part of Strategic Vision plan for 2025, a National Laboratory identified community outreach and the future workforces as key areas for initiatives. A series of hands-on interactive modules have been developed by professional ergonomics specialists. They are being tested with elementary, middle and high school students. Where possible, the content has been tied to the educational standards in the State of California in the USA. Currently the modules include grip strength, effective breathing, optimal keyboard and mouse positions, optimizing chairs, posture and movement, backpack safety and safe lifting. Each module takes the students through a related activity or experience. An individual worksheet asks them questions about the experience and guides them to consider implications in their activities of daily living. A module on hearing is under development. The goal is to have a

  2. USER INTERFACE FOR A TELE-OPERATED ROBOTIC HAND SYSTEM - Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    This Technology Technology Marketing Summary A user interface for the teleoperation of a robotic hand. The user interface conducts a calibration procedure to determine a user's...

  3. Personnel Security Corner - PERSEC Corner | Department of Energy

    Office of Environmental Management (EM)

    If you have not yet registered for access to this information, please complete our Registration form. If you have already registered, please click here and enter your credentials ...

  4. Extending a hand: Argonne Hispanic Latino Club mentors Chicago-area

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    students | Argonne National Laboratory From left: Michael Kaminski, Argonne materials engineer and Hispanic Latino Club President, and Argonne Lab Director Peter Littlewood guide Humphrey Middle School students in the creation of a PowerPoint presentation following the tour. Credit: Mark Lopez/Argonne National Laboratory. (Click image to enlarge) From left: Michael Kaminski, Argonne materials engineer and Hispanic Latino Club President, and Argonne Lab Director Peter Littlewood guide

  5. Petrophysical corner - calculating water cut

    SciTech Connect (OSTI)

    Elphick, R.Y. )

    1990-02-01

    The problem of determining the amount of water cut that can be expected from a well is discussed in conjunction with a program for making this calculation. The program was written for Amiga, Apple Macintosh, and MS DOS personal computers and source code for the program is provided.

  6. Media Corner - News Archive: 2010

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 News Archive: 2010 Catching up with Ned Sauthoff, ITER, and the Prince of Monaco [Knoxville News Sentinel, November 30, 2010] Foundation Stone for ITER [Knoxville News Sentinel, November 25, 2010] Engineer Gary Johnson helping expand future of fusion [Evansville Courier & Press, October 16, 2010] Support contracts for US ITER [Knoxville News Sentinel, August 21, 2010] ITER construction -- can you dig it? [Knoxville News Sentinel, August 8, 2010] New Director Shakes Up Management of Fusion

  7. Media Corner - News Archive: 2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 News Archive: 2011 US ITER News UT Magnet Lab Advances US ITER and Next Generation of Engineers, Scientists [US ITER, December 29, 2011] Space elevators and smart machines: Life in the year 2100 [CNN, December 16, 2011] In Era of Constrained Budgets, Basic Research Remains Critical for Nation's Prosperity [Inside Science, November 29, 2011] US jacketing line takes shape at Tallahassee Airport [ITER Newsline, November 4, 2011] From "Snowballs in Hell" to "Burping the Baby,"

  8. Media Corner - News Archive: 2012

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 News Archive: 2012 US ITER News A landmark decree authorizes ITER construction [ITER Newsline, November 12, 2012] Nuclear fusion, JET and ITER: Your questions answered [The Engineer, November 5, 2012] Thom Mason talks about US ITER: 'When you're running a project, you've got to go full steam ahead' [Knoxville News Sentinel, July 16, 2012] New Jersey firm creates jobs and vital components for world-leading experiment[Princeton Plasma Physics Laboratory, July 10, 2012] New procurement

  9. Media Corner - News Archive: 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 News Archive: 2013 US ITER News Final design review for central solenoid [ITER Newsline, December 4, 2013] Another step towards powering the ITER facility [ITER Newsline, October 15, 2013] Powering the future: What will fuel the next thousand years? [CBS News, August 26, 2013] Armed and ready to identify leaks [ITER Newsline, May 6, 2013] A symphony of particles [ITER Newsline, February 4, 2013] Robustness of ITER's solenoid conductor confirmed [ITER Newsline, February 4, 2013

  10. Media Corner - News Archive: 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 News Archive: 2014 US ITER News First highly exceptional load sails to ITER [ITER Newsline, November 17, 2014] Second delivery of components to ITER [ITER Newsline, September 18, 2014] Disruption mitigation team reviews progress [ITER Newsline, September 19, 2014] ITER receives first plant components [World Nuclear News, September 5, 2014] High voltage surge arrestors are the first components delivered to ITER [ITER Newsline, September 4, 2014] Foundation in place for ITER tokamak [World

  11. DOE Tour of Zero: Pumpkin Ridge Passive House by Hammer and Hand |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Pumpkin Ridge Passive House by Hammer and Hand DOE Tour of Zero: Pumpkin Ridge Passive House by Hammer and Hand 1 of 10 Hammer and Hand built this 3,599-square-foot home near Portland, Oregon, to the performance criteria of the U.S. Department of Energy Zero Energy Ready Home (ZERH) program. 2 of 10 This high-performance two-story home has been certified to the criteria of the DOE's Zero Energy Ready Home program, the Passive House Institute U.S., and the Pacific

  12. Right/left assignment in drift chambers and proportional multiwire chambers (PWC's) using induced signals

    DOE Patents [OSTI]

    Walenta, Albert H.

    1979-01-01

    Improved multiwire chamber having means for resolving the left/right ambiguity in the location of an ionizing event. The chamber includes a plurality of spaced parallel anode wires positioned between spaced planar cathodes. Associated with each of the anode wires are a pair of localizing wires, one positioned on either side of the anode wire. The localizing wires are connected to a differential amplifier whose output polarity is determined by whether the ionizing event occurs to the right or left of the anode wire.

  13. xLPR Hands-on workshop. (Conference) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    DOE Contract Number: AC04-94AL85000 Resource Type: Conference Resource Relation: Conference: Proposed for presentation at the xLPR hands-on meeting held March 12-13, 2015 in ...

  14. Standard's Guide to Learning Middle School Hands-On Science Elective...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Guide to Learning Middle School Hands-On Science Elective Class Student: Grade: Date: Math B Proficiency Levels PP P A Collect, organize, analyze, and graph (e.g., line plots,...

  15. ALCF Theta ESP Hands-On Workshop | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALCF Theta ESP Hands-On Workshop August 16 - 19, 2016 Argonne Leadership Computing Facility In this workshop, developers from the ALCF's Theta Early Science Program (ESP) projects will have access to the new Theta supercomputer to work on porting, benchmarking, and optimizing their applications. The event will include two half-days of instruction from Intel and Cray on their development and systems software. The remainder of workshop time will be unstructured hands-on work. Days 1 & 2 |

  16. Charter school on Sandia's doorstep gives students hands-on experience in

    National Nuclear Security Administration (NNSA)

    STEM | National Nuclear Security Administration | (NNSA) Charter school on Sandia's doorstep gives students hands-on experience in STEM Wednesday, December 30, 2015 - 9:35am NNSA Blog A math project at the school included cake baking. The approach to education is interdisciplinary, pulling subjects like algebra, physics, and language arts into a single, hands-on assignment. Technology Leadership High School, a public charter located close to Sandia National Laboratories and technology-based

  17. New Nuclear Energy Awards Give Students Hands-On Research Experience |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Nuclear Energy Awards Give Students Hands-On Research Experience New Nuclear Energy Awards Give Students Hands-On Research Experience September 28, 2012 - 9:33am Addthis Bojan Petrovic, a senior researcher at Georgia Institute of Technology, will lead an IRP team in developing a high-power light water reactor design with inherent safety features. | Photo courtesy of Georgia Institute of Technology Bojan Petrovic, a senior researcher at Georgia Institute of Technology,

  18. Percutaneous fenestration of aortic dissection: Salvage of an ischemic solitary left kidney

    SciTech Connect (OSTI)

    Park, Jae Hyung; Chung, Jin Wook; Cho, Yoon Koo; Kim, Sun Ho; Ahn, Hyuk; Oh, Byung Hee

    1997-03-15

    The false channel of a type III aortic dissection caused acute renal ischemia by compression of the origin of the left renal artery in a patient with status post-right nephrectomy. To relieve the ischemia and restore renal function, percutaneous balloon fenestration was performed successfully.

  19. Advanced dexterous manipulation for IED defeat : report on the feasibility of using the ShadowHand for remote operations.

    SciTech Connect (OSTI)

    Anderson, Robert J.

    2011-01-01

    Improvised Explosive Device (IED) defeat (IEDD) operations can involve intricate operations that exceed the current capabilities of the grippers on board current bombsquad robots. The Shadow Dexterous Hand from the Shadow Robot Company or 'ShadowHand' for short (www.shadowrobot.com) is the first commercially available robot hand that realistically replicates the motion, degrees-of-freedom and dimensions of a human hand (Figure 1). In this study we evaluate the potential for the ShadowHand to perform potential IED defeat tasks on a mobile platform.

  20. Left-right spin asymmetry in ℓN↑→hX

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Gamberg, Leonard; Kang, Zhong -Bo; Metz, Andreas; Pitonyak, Daniel; Prokudin, Alexei

    2014-10-09

    In this study, we consider the inclusive production of hadrons in lepton-nucleon scattering. For a transversely polarized nucleon this reaction shows a left-right azimuthal asymmetry, which we compute in twist-3 collinear factorization at leading order in perturbation theory. All non-perturbative parton correlators of the calculation are fixed through information from other hard processes. Our results for the left-right asymmetry agree in sign with recent data for charged pion production from the HERMES Collaboration and from Jefferson Lab. However, the magnitude of the computed asymmetries tends to be larger than the data. Potential reasons for this outcome are identified. We alsomore » give predictions for future experiments and highlight in particular the unique opportunities at an Electron Ion Collider.« less

  1. Left-right spin asymmetry in ? N? ? h ?

    SciTech Connect (OSTI)

    Gamberg, Leonard; Kang, Zhong -Bo; Metz, Andreas; Pitonyak, Daniel; Prokudin, Alexei

    2014-10-01

    We consider the inclusive production of hadrons in lepton-nucleon scattering. For a transversely polarized nucleon this reaction shows a left-right azimuthal asymmetry, which we compute in twist-3 collinear factorization at leading order in perturbation theory. All non-perturbative parton correlators of the calculation are fixed through information from other hard processes. Our results for the left-right asymmetry agree in sign with recent data for charged pion production from the HERMES Collaboration and from Jefferson Lab. However, the magnitude of the computed asymmetries tends to be larger than the data. Potential reasons for this outcome are identified. We also give predictions for future experiments and highlight in particular the unique opportunities at an Electron Ion Collider.

  2. Rare top quark decays in Alternative Left-Right Symmetric Models

    SciTech Connect (OSTI)

    Gaitan, R.; Miranda, O. G.; Cabral-Rosetti, L. G.

    2007-06-19

    We evaluate the flavor changing neutral currents (FCNC) decay t {yields} H0 + c in the context of Alternative Left-Right symmetric Models (ALRM) with extra isosinglet heavy fermions; the FCNC decays may place at tree level and are only supressed by the mixing between ordinary top and charm quarks. We also comment on the decay process t {yields} c + {gamma}, which involves radiative corrections.

  3. Right-Handed Neutrinos and the 2 TeV $W'$ Boson

    SciTech Connect (OSTI)

    Coloma, Pilar; Dobrescu, Bogdan A.; Lopez-Pavon, Jacobo

    2015-12-30

    The CMS e+e-jj events of invariant mass near 2 TeV are consistent with a W' boson decaying into an electron and a right-handed neutrino whose TeV-scale mass is of the Dirac type. We show that the Dirac partner of the right-handed electron-neutrino can be the right-handed tau-neutrino. Furthermore, a prediction of this model is that the sum of the τ+e+jj and τ-e-jj signal cross sections equals twice that for e+e-jj. The Standard Model neutrinos acquire Majorana masses and mixings compatible with neutrino oscillation data.

  4. On the damping of right hand circularly polarized waves in spin quantum plasmas

    SciTech Connect (OSTI)

    Iqbal, Z.; Hussain, A.; Murtaza, G.; Ali, M.

    2014-12-15

    General dispersion relation for the right hand circularly polarized waves has been derived using non-relativistic spin quantum kinetic theory. Employing the derived dispersion relation, temporal and spatial damping of the right hand circularly polarized waves are studied for both the degenerate and non-degenerate plasma regimes for two different frequency domains: (i) k{sub ?}v?(?+?{sub ce}),(?+?{sub cg}) and (ii) k{sub ?}v?(?+?{sub ce}),(?+?{sub cg}). Comparison of the cold and hot plasma regimes shows that the right hand circularly polarized wave with spin-effects exists for larger k-values as compared to the spinless case, before it damps completely. It is also found that the spin-effects can significantly influence the phase and group velocities of the whistler waves in both the degenerate and non-degenerate regimes. The results obtained are also analyzed graphically for some laboratory parameters to demonstrate the physical significance of the present work.

  5. Evaluation of Hand Lay-Up and Resin Transfer Molding in Composite Wind Turbine Blade Manufacturing

    SciTech Connect (OSTI)

    CAIRNS,DOUGLAS S.; SHRAMSTAD,JON D.

    2000-06-01

    The majority of the wind turbine blade industry currently uses low cost hand lay-up manufacturing techniques to process composite blades. While there are benefits to the hand lay-up process, drawbacks inherent to this process along with advantages of other techniques suggest that better manufacturing alternatives may be available. Resin Transfer Molding (RTM) was identified as a processing alternative and shows promise in addressing the shortcomings of hand lay-up. This report details a comparison of the RTM process to hand lay-up of composite wind turbine blade structures. Several lay-up schedules and critical turbine blade structures were chosen for comparison of their properties resulting from RTM and hand lay-up processing. The geometries investigated were flat plate, thin and thick flanged T-stiffener, I-beam, and root connection joint. It was found that the manufacturing process played an important role in laminate thickness, fiber volume, and weight for the geometries investigated. RTM was found to reduce thickness and weight and increase fiber volumes for all substructures. RTM resulted in tighter material transition radii and eliminated the need for most secondary bonding operations. These results would significantly reduce the weight of wind turbine blades. Hand lay-up was consistently slower in fabrication times for the structures investigated. A comparison of mechanical properties showed no significant differences after employing fiber volume normalization techniques to account for geometry differences resulting from varying fiber volumes. The current root specimen design does not show significant mechanical property differences according to process and exceeds all static and fatigue requirements.

  6. Idle hands: New and improved IdleBox tool to aid in reduction of idling |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Argonne National Laboratory Idle hands: New and improved IdleBox tool to aid in reduction of idling Mississippi State University EcoCAR 3 team members help conduct an IdleBox campaign at New Hope Middle School in Columbus, Mississippi. Mississippi State University EcoCAR 3 team members help conduct an IdleBox campaign at New Hope Middle School in Columbus, Mississippi. Idle hands: New and improved IdleBox tool to aid in reduction of idling By Scott Jones * July 25, 2016 Tweet EmailPrint The

  7. Hands-On Session 6: Monolayer Boron Nitride BerkeleyGW Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hands-On Lessons in Clean Energy Hands-On Lessons in Clean Energy December 24, 2013 - 9:40am Addthis Sixth graders compare emissions from a candle—invisible until they hold a mirror close to the flame and watch carbon blacken its surface. The same mirror grows steamy but clear when held up to the water vapor piping out of the tea kettle. Sharon Cosgrove, of the Energy Department’s Geothermal Technologies Office, talks with the students about energy options: burning hydrocarbons to boil

  8. Students Learn about Wind Power First-Hand through Wind for Schools Program

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Learn about Wind Power First-Hand through Wind for Schools Program Students Learn about Wind Power First-Hand through Wind for Schools Program February 18, 2011 - 3:48pm Addthis JMU student Greg Miller shows Northumberland students how the blades of a wind turbine work | courtesy of Virginia Center for Wind Energy JMU student Greg Miller shows Northumberland students how the blades of a wind turbine work | courtesy of Virginia Center for Wind Energy April Saylor April

  9. Experience hands-on Halloween science Oct. 28 at Bradbury Science Museum

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Experience hands-on Halloween science Experience hands-on Halloween science Oct. 28 at Bradbury Science Museum Are you ready for some spooky science? Then climb into your costume and head on over to the Bradbury Science Museum for "High-Tech Halloween!" October 24, 2011 Bradbury Science Museum Bradbury Science Museum Contact Steve Sandoval Communications Office (505) 665-9206 Email LOS ALAMOS, New Mexico, October 24, 2011-Are you ready for some spooky science? Then climb into your

  10. EERE Success Story-Oglala Lakota College gets Hands-On Training for

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Off-Grid Solar | Department of Energy Oglala Lakota College gets Hands-On Training for Off-Grid Solar EERE Success Story-Oglala Lakota College gets Hands-On Training for Off-Grid Solar July 13, 2013 - 4:58pm Addthis Students and instructors at Oglala Lakota College designed, connected and built a mobile solar energy system over the course of two days. | Photo courtesy of Oglala Lakota College. Students and instructors at Oglala Lakota College designed, connected and built a mobile solar

  11. Through the Looking Glass: The Art and Science of Hand-Polishing Precision Optics

    Broader source: Energy.gov [DOE]

    Peter Thelin is a one-of-a-kind optics specialist at Lawrence Livermore National Laboratory. From telescopes to lasers, he is one of the last people on the planet who can polish precision optics by hand. He even contributed to the preservation of the statue of David.

  12. Signatures for Right-Handed Neutrinos at the Large Hadron Collider

    SciTech Connect (OSTI)

    Huitu, Katri; Rai, Santosh Kumar; Khalil, Shaaban; Okada, Hiroshi

    2008-10-31

    We explore possible signatures for right-handed neutrinos in a TeV scale B-L extension of the standard model at the Large Hadron Collider. The studied four lepton signal has a tiny standard model background. We find the signal experimentally accessible at the LHC for the considered parameter regions.

  13. Visualization of Fiber Structurein the Left and Right Ventricleof a Human Heart

    SciTech Connect (OSTI)

    Rohmer, Damien; Sitek, Arkadiusz; Gullberg, Grant T.

    2006-07-12

    The human heart is composed of a helical network of musclefibers. Anisotropic least squares filtering followed by fiber trackingtechniques were applied to Diffusion Tensor Magnetic Resonance Imaging(DTMRI) data of the excised human heart. The fiber configuration wasvisualized by using thin tubes to increase 3-dimensional visualperception of the complex structure. All visualizations were performedusing the high-quality ray-tracing software POV-Ray. The fibers are shownwithin the left and right ventricles. Both ventricles exhibit similarfiber architecture and some bundles of fibers are shown linking right andleft ventricles on the posterior region of the heart.

  14. Molecular Biology for the Environment: an EC-US hands-on Course in Environmental Biotechnology

    SciTech Connect (OSTI)

    Victor de Lorenzo; Juan Luis Ramos; Jerome Kukor; Gerben J. Zylstra

    2004-02-15

    One of the central goals of this activity is to bring together young scientists (at the late Ph.D. or early postdoctoral stages of their careers) in a forum that should result in future collaborations. The course is designed to give scientists hands-on experience in modern, up-to-date biotechnological methods at the interface between molecular biology and environmental biotechnology for the analysis of microorganisms and their activities with regard to the remediation of pollutants in the environment.

  15. PPPL lends General Electric a hand in developing an advanced power switch |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Princeton Plasma Physics Lab PPPL lends General Electric a hand in developing an advanced power switch By John Greenwald August 28, 2014 Tweet Widget Google Plus One Share on Facebook Laboratory test of a liquid-metal cathode. (Photo by General Electric Co.) Laboratory test of a liquid-metal cathode. Scientists at the U.S. Department of Energy's (DOE) Princeton Plasma Physics Laboratory (PPPL) are assisting General Electric Co. in developing an electrical switch that could help lower utility

  16. PPPL lends General Electric a hand in developing an advanced power switch |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Princeton Plasma Physics Lab lends General Electric a hand in developing an advanced power switch By John Greenwald August 28, 2014 Tweet Widget Google Plus One Share on Facebook Laboratory test of a liquid-metal cathode. (Photo by General Electric Co. ) Laboratory test of a liquid-metal cathode. Scientists at the U.S. Department of Energy's (DOE) Princeton Plasma Physics Laboratory (PPPL) are assisting General Electric Co. in developing an electrical switch that could help lower utility

  17. 11th LANSCE School on Neutron Scattering | Hands-On Experiments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    sample picture Hands-on Experiments Students will have an opportunity to participate in experimental set-up and data-analysis of various exemplary neutron experiments in the areas of materials at the mesoscale. They will use several instruments utlizing different neutron scattering and complementary techniques. Featured Instruments (tentative) HIPPO: Texture Studies SPEAR: Study of nanoparticle assemblies with neutron reflectometry LQD: Self-Assembled Structures NPDF: Study of nanostructured

  18. Right-handed neutrino production rate at T>160 GeV

    SciTech Connect (OSTI)

    Ghisoiu, I.; Laine, M.

    2014-12-16

    The production rate of right-handed neutrinos from a Standard Model plasma at a temperature above a hundred GeV has previously been evaluated up to NLO in Standard Model couplings (g∼2/3) in relativistic (M∼πT) and non-relativistic regimes (M≫πT), and up to LO in an ultrarelativistic regime (M≲gT). The last result necessitates an all-orders resummation of the loop expansion, accounting for multiple soft scatterings of the nearly light-like particles participating in 1↔2 reactions. In this paper we suggest how the regimes can be interpolated into a result applicable for any right-handed neutrino mass and at all temperatures above 160 GeV. The results can also be used for determining the lepton number washout rate in models containing right-handed neutrinos. Numerical results are given in a tabulated form permitting for their incorporation into leptogenesis codes. We note that due to effects from soft Higgs bosons there is a narrow intermediate regime around M∼g{sup 1/2}T in which our interpolation is phenomenological and a more precise study would be welcome.

  19. Right-handed neutrino production rate at T>160 GeV

    SciTech Connect (OSTI)

    Ghisoiu, I.; Laine, M. E-mail: laine@itp.unibe.ch

    2014-12-01

    The production rate of right-handed neutrinos from a Standard Model plasma at a temperature above a hundred GeV has previously been evaluated up to NLO in Standard Model couplings (g ? 2/3) in relativistic (M ? ?T) and non-relativistic regimes (M >> ?T), and up to LO in an ultrarelativistic regime (M ?< gT). The last result necessitates an all-orders resummation of the loop expansion, accounting for multiple soft scatterings of the nearly light-like particles participating in 1 ? 2 reactions. In this paper we suggest how the regimes can be interpolated into a result applicable for any right-handed neutrino mass and at all temperatures above 160GeV. The results can also be used for determining the lepton number washout rate in models containing right-handed neutrinos. Numerical results are given in a tabulated form permitting for their incorporation into leptogenesis codes. We note that due to effects from soft Higgs bosons there is a narrow intermediate regime around (M?g{sup 1/2}T in which our interpolation is phenomenological and a more precise study would be welcome.

  20. Non-thermal production of minimal dark matter via right-handed neutrino decay

    SciTech Connect (OSTI)

    Aoki, Mayumi; Toma, Takashi; Vicente, Avelino

    2015-09-29

    Minimal Dark Matter (MDM) stands as one of the simplest dark matter scenarios. In MDM models, annihilation and co-annihilation processes among the members of the MDM multiplet are usually very efficient, pushing the dark matter mass above O(10) TeV in order to reproduce the observed dark matter relic density. Motivated by this little drawback, in this paper we consider an extension of the MDM scenario by three right-handed neutrinos. Two specific choices for the MDM multiplet are studied: a fermionic SU(2){sub L} quintuplet and a scalar SU(2){sub L} septuplet. The lightest right-handed neutrino, with tiny Yukawa couplings, never reaches thermal equilibrium in the early universe and is produced by freeze-in. This creates a link between dark matter and neutrino physics: dark matter can be non-thermally produced by the decay of the lightest right-handed neutrino after freeze-out, allowing to lower significantly the dark matter mass. We discuss the phenomenology of the non-thermally produced MDM and, taking into account significant Sommerfeld corrections, we find that the dark matter mass must have some specific values in order not to be in conflict with the current bounds from gamma-ray observations.

  1. Automated tracking and grasping of a moving object with a robotic hand-eye system

    SciTech Connect (OSTI)

    Allen, P.K.; Timcenko, A.; Yoshimi, B.; Michelman, P. . Dept. of Computer Science)

    1993-04-01

    Most robotic grasping tasks assume a stationary or fixed object. In this paper, the authors explore the requirements for tracking and grasping a moving object. The focus of the work is to achieve a high level of interaction between a real-time vision system capable of tracking moving objects in 3-D and a robot arm with gripper that can be used to pick up a moving object. There is an interest in exploring the interplay of hand--eye coordination for dynamic grasping takes such as grasping of parts on a moving conveyor system, assembly of articulated parts, or for grasping from a mobile robotic system. Coordination between an organisms sensing modalities and motor control system is a hallmark of intelligent behavior, and they are pursuing the goal of building an integrated sensing and actuation system that can operate in dynamic as opposed to static environments. The system they have built addresses three distinct problems in robotic hand--eye coordination for grasping moving objects: fast computation of 3-D motion parameters from vision, predictive control of a moving robotic arm to track a moving object, and interception and grasping. The system is able to operate at approximately human arm movement rates, and experimental results in which a moving model train is tracked is presented, stably grasped, and picked up by the system. The algorithms they have developed that relate sensing to actuation are quite general and applicable to a variety of complex robotic tasks that require visual feedback for arm and hand control.

  2. {mu}-{tau} symmetry, sterile right-handed neutrinos, and leptogenesis

    SciTech Connect (OSTI)

    Riazuddin [National Centre for Physics, Quaid-i-Azam University, Islamabad (Pakistan)

    2008-01-01

    Leptogenesis is studied in a seesaw model with {mu}-{tau} symmetry for SU{sub L}(2)-singlet right-handed neutrinos. It is shown that lepton asymmetry is not zero and is given by the square of the solar neutrino mass difference and can be of the right order of magnitude. Further it involves the same Majorana phase which appears in the neutrinoless double {beta}-decay. In this framework one of the right-handed seesaw partners of light neutrinos can be made massless. This can be identified with a sterile neutrino, once it acquires a tiny mass ({approx_equal}1 eV) when {mu}-{tau} symmetry is broken in the right-handed neutrino sector. The above mentioned sterile neutrino together with another one can be identified to explain the MiniBooNE and LSND results. The light 5x5 neutrino mass matrix is completely fixed if CP is conserved and so is the effective mass for neutrinoless double {beta}-decay.

  3. Rare top quark and Higgs boson decays in alternative left-right symmetric models

    SciTech Connect (OSTI)

    Gaitan, R.; Miranda, O.G.; Cabral-Rosetti, L.G.

    2005-08-01

    Top quark and Higgs boson decays induced by flavor-changing neutral currents (FCNC) are very much suppressed in the standard model. Their detection in colliders such as the Large Hadron Collider, Next Linear Collider, or Tevatron would be a signal of new physics. We evaluate the FCNC decays t{yields}H{sup 0}+c, t{yields}Z+c, and H{sup 0}{yields}t+c in the context of alternative left-right symmetric models with extra isosinglet heavy fermions; in this case, FCNC decays occur at tree level, and they are suppressed only by the mixing between ordinary top and charm quarks, which is poorly constrained by current experimental values. This provides the possibility for future colliders either to detect new physics or to improve present bounds on the parameters of the model.

  4. Intrahepatic Left to Right Portoportal Venous Collateral Vascular Formation in Patients Undergoing Right Portal Vein Ligation

    SciTech Connect (OSTI)

    Lienden, K. P. van; Hoekstra, L. T.; Bennink, R. J.; Gulik, T. M. van

    2013-12-15

    Purpose: We investigated intrahepatic vascular changes in patients undergoing right portal vein ligation (PVL) or portal vein embolization (PVE) in conjunction with the ensuing hypertrophic response and function of the left liver lobe. Methods: Between December 2008 and October 2011, 7 patients underwent right PVL and 14 patients PVE. Computed tomographic (CT) volumetry to assess future remnant liver (FRL) and functional hepatobiliary scintigraphy were performed in all patients before and 3 weeks after portal vein occlusion. In 18 patients an intraoperative portography was performed to assess perfusion through the occluded portal branches. Results: In all patients after initially successful PVL, reperfused portal veins were observed on CT scan 3 weeks after portal occlusion. This was confirmed in all cases during intraoperative portography. Intrahepatic portoportal collaterals were identified in all patients in the PVL group and in one patient in the PVE group. In all other PVE patients, complete occlusion of the embolized portal branches was observed on CT scan and on intraoperative portography. The median increase of FRL volume after PVE was 41.6 % (range 10-305 %), and after PVL was only 8.1 % (range 0-102 %) (p = 0.179). There were no differences in FRL function between both groups. Conclusion: Preoperative PVE and PVL are both methods to induce hypertrophy of the FRL in anticipation of major liver resection. Compared to PVE, PVL seems less efficient in inducing hypertrophy of the nonoccluded left lobe. This could be caused by the formation of intrahepatic portoportal neocollateral vessels, through which the ligated portal branches are reperfused within 3 weeks.

  5. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) Quality Assurance Manual

    SciTech Connect (OSTI)

    C. L. Smith; R. Nims; K. J. Kvarfordt; C. Wharton

    2008-08-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) is a software application developed for performing a complete probabilistic risk assessment using a personal computer running the Microsoft Windows operating system. SAPHIRE is primarily funded by the U.S. Nuclear Regulatory Commission (NRC). The role of the INL in this project is that of software developer and tester. This development takes place using formal software development procedures and is subject to quality assurance (QA) processes. The purpose of this document is to describe how the SAPHIRE software QA is performed for Version 6 and 7, what constitutes its parts, and limitations of those processes.

  6. Environmental applications of hand-held photography taken from the space shuttle

    SciTech Connect (OSTI)

    Muehlberger, W.R.

    1996-07-01

    Astronauts have been taking photographs of earth since 1965, years before unmanned satellites began systematic coverage. The trained eye of an intelligent observer permits the rapid identification of a feature or an anomaly so that it can be the central focus of the photograph, rather than one of an endless stream of information from an unmanned satellite through which the interpreter has to sort and pick. This paper describes some of the environmental uses of hand-held photography since the launch of the first Space Shuttle in April, 1981.

  7. Weak Interaction Models with New Quarks and Right-handed Currents

    DOE R&D Accomplishments [OSTI]

    Wilczek, F. A.; Zee, A.; Kingsley, R. L.; Treiman, S. B.

    1975-06-01

    We discuss various weak interaction issues for a general class of models within the SU(2) x U(1) gauge theory framework, with special emphasis on the effects of right-handed, charged currents and of quarks bearing new quantum numbers. In particular we consider the restrictions on model building which are imposed by the small KL - KS mass difference and by the .I = = rule; and we classify various possibilities for neutral current interactions and, in the case of heavy mesons with new quantum numbers, various possibilities for mixing effects analogous to KL - KS mixing.

  8. Kilovoltage cone-beam CT imaging dose during breast radiotherapy: A dose comparison between a left and right breast setup

    SciTech Connect (OSTI)

    Quinn, Alexandra; Holloway, Lois; Begg, Jarrad; Nelson, Vinod; Metcalfe, Peter

    2014-07-01

    The purpose of this study was to investigate the delivered dose from a kilovoltage cone-beam computed tomography (kV-CBCT) acquired in breast treatment position for a left and right breast setup. The dose was measured with thermoluminescent dosimeters positioned within a female anthropomorphic phantom at organ locations. Imaging was performed on an Elekta Synergy XVI system with the phantom setup on a breast board. The image protocol involved 120 kVp, 140 mAs, and a 270 arc rotation clockwise 0 to 270 for the left breast setup and 270 to 180 for the right breast setup (maximum arc rotations possible). The dose delivered to the left breast, right breast, and heart was 5.1 mGy, 3.9 mGy, and 4.0 mGy for the left breast setup kV-CBCT, and 6.4 mGy, 6.0 mGy, and 4.8 mGy for the right breast setup kV-CBCT, respectively. The rotation arc of the kV-CBCT influenced the dose delivered, with the right breast setup kV-CBCT found to deliver a dose of up to 4 mGy or 105% higher to the treated breast?s surface in comparison with the left breast setup. This is attributed to the kV-CBCT source being more proximal to the anterior of the phantom for a right breast setup, whereas the source is more proximal to the posterior of the patient for a left-side scan.

  9. Algorithms for a hand-held miniature x-ray fluorescence analytical instrument

    SciTech Connect (OSTI)

    Elam, W.T.; Newman, D.; Ziemba, F.

    1998-12-31

    The purpose of this joint program was to provide technical assistance with the development of a Miniature X-ray Fluorescence (XRF) Analytical Instrument. This new XRF instrument is designed to overcome the weaknesses of spectrometers commercially available at the present time. Currently available XRF spectrometers (for a complete list see reference 1) convert spectral information to sample composition using the influence coefficients technique or the fundamental parameters method. They require either a standard sample with composition relatively close to the unknown or a detailed knowledge of the sample matrix. They also require a highly-trained operator and the results often depend on the capabilities of the operator. In addition, almost all existing field-portable, hand-held instruments use radioactive sources for excitation. Regulatory limits on such sources restrict them such that they can only provide relatively weak excitation. This limits all current hand-held XRF instruments to poor detection limits and/or long data collection times, in addition to the licensing requirements and disposal problems for radioactive sources. The new XRF instrument was developed jointly by Quantrad Sensor, Inc., the Naval Research Laboratory (NRL), and the Department of Energy (DOE). This report describes the analysis algorithms developed by NRL for the new instrument and the software which embodies them.

  10. Bound on Z{sup '} mass from CDMS II in the dark left-right gauge model II

    SciTech Connect (OSTI)

    Khalil, Shaaban; Lee, Hye-Sung; Ma, Ernest

    2010-03-01

    With the recent possible signal of dark matter from the CDMS II experiment, the Z{sup '} mass of a new version of the dark left-right gauge model (DLRM II) is predicted to be at around a TeV. As such, it has an excellent discovery prognosis at the operating Large Hadron Collider.

  11. Relationship between occupational exposure to lead and local arterial stiffness and left ventricular diastolic function in individuals with arterial hypertension

    SciTech Connect (OSTI)

    Poreba, Rafal; Gac, Pawel; Poreba, Malgorzata; Antonowicz-Juchniewicz, Jolanta; Andrzejak, Ryszard

    2011-08-01

    Relationship between occupational exposure to lead and frequency of complications in persons with arterial hypertension has been poorly investigated. This study aimed at evaluation of the relationship between occupational exposure to lead and manifestation of an increased local arterial stiffness and left ventricular diastolic dysfunction. The studies included 105 men (mean age: 44.47 {+-} 9.12 years) with arterial hypertension, treated with hypotensive drugs: group I - men occupationally exposed to lead (n = 53), and group II - men not exposed to lead (n = 52). In echocardiographic examination, the left ventricular diastolic dysfunction was diagnosed significantly more frequently in group I than in group II. In eTracking examination mean values of stiffness parameter ({beta}), augmentation index (AI) and one-point pulse wave velocity (PWV-{beta}) were significantly higher and mean values of arterial compliance (AC) were significantly lower in group I than in group II. The logistic regression showed that in the group of persons with arterial hypertension occupationally exposed to lead a more advanced age, higher blood lead concentration and higher mean values of augmentation index represent independent risk factors of left ventricular diastolic dysfunction. The multifactorial regression showed that amongst persons with arterial hypertension occupationally exposed to lead higher blood zinc protoporphyrin concentration, a more advanced age and higher value of body mass index (BMI) represent independent risk factors of an increased local arterial stiffness. In summary, we should note that in the group of persons with arterial hypertension occupationally exposed to lead the study has demonstrated a significantly more frequent manifestation of left ventricular diastolic dysfunction and an increase in local arterial stiffness. - Highlights: > Amongst persons with AH exposed to Pb higher ZnPP represent independent risk factor of increased local arterial stiffness

  12. Fermilab Today | Director's Corner Archive | 2009

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the last decades. In high energy physics both the Pontificia Universidad Catlica del Peru (PUCP) and the Universidad Nacional de Ingeniera (UNI) have groups working at...

  13. Fermilab Today | Director's Corner Archive | 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for management and performance, and Melanie Kenderdine, executive director for energy policy and systems analysis. During our meeting, Secretary Moniz elaborated on several of...

  14. Fermilab Today | Director's Corner Archive | 2015

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    What makes LBNFDUNE different? The key differences are the model and the scale for international partnership. The historic model was for the host laboratory - Fermilab - to make...

  15. Stoney Corners II (REpower) | Open Energy Information

    Open Energy Info (EERE)

    Developer Heritage Sustainable Energy Energy Purchaser Traverse City Light & PowerDetroit Edison Location McBain MI Coordinates 44.209, -85.275 Show Map Loading map......

  16. Fermilab Today | Director's Corner Archive | 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    strength of this key partnership. On Thursday I spoke at a meeting of the Secretary of Energy Advisory Board held at Argonne National Laboratory. SEAB, as it's known, is a...

  17. Fermilab Today | Director's Corner Archive | 2010

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    today and in the future, the plans for future global facilities and their governance were greatly enriched by Bill Brinkmans and Rolf Heuers participation. We are...

  18. Fermilab Today | Director's Corner Archive | 2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    put to the test. Fortunately the fire in the access shaft at Soudan has been controlled; emergency personnel have been down to the bottom level of the mine and re-established...

  19. Fermilab Today | Director's Corner Archive | 2012

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    yesterday with DOE's granting of CD-1 approval to the first phase of LBNE. But in order to meet our long-term scientific goals, we must also develop clear long-term goals for...

  20. CT-Guided Interventions Using a Free-Hand, Optical Tracking System: Initial Clinical Experience

    SciTech Connect (OSTI)

    Schubert, Tilman Jacob, Augustinus L.; Pansini, Michele; Liu, David; Gutzeit, Andreas; Kos, Sebastian

    2013-08-01

    PurposeThe present study was designed to evaluate the geometrical accuracy and clinical applicability of a new, free-hand, CT-guided, optical navigation system.MethodsFifteen procedures in 14 consecutive patients were retrospectively analyzed. The navigation system was applied for interventional procedures on small target lesions, in cases with long needle paths, narrow access windows, or when an out-of-plane access was expected. Mean lesion volume was 27.9 ml, and mean distance to target measured was 107.5 mm. Eleven of 15 needle trajectories were planned as out-of-plane approaches regarding the axial CT plane.ResultsNinety-one percent of the biopsies were diagnostic. All therapeutic interventions were technically successful. Targeting precision was high with a mean distance of the needle tip from planned target of 1.98 mm. Mean intervention time was 1:12 h. A statistically significant correlation between angular needle deviation and intervention time (p = 0.007), respiratory movement of the target (p = 0.008), and body mass index (p = 0.02) was detected. None of the evaluated parameters correlated significantly with the distance from the needle tip to the planned target.ConclusionsThe application of a navigation system for complex CT-guided procedures provided safe and effective targeting within a reasonable intervention time in our series.

  1. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) Data Loading Manual

    SciTech Connect (OSTI)

    C. L. Smith; K. J. Kvarfordt; S. T. Wood

    2008-08-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) is a software application developed for performing a complete probabilistic risk assessment (PRA) using a personal computer. SAPHIRE is primarily funded by the U.S. Nuclear Regulatory Commission (NRC) and developed by the Idaho National Laboratory. This report is intended to assist the user to enter PRA data into the SAPHIRE program using the built-in MAR-D ASCII-text file data transfer process. Towards this end, a small sample database is constructed and utilized for demonstration. Where applicable, the discussion includes how the data processes for loading the sample database relate to the actual processes used to load a larger PRA models. The procedures described herein were developed for use with SAPHIRE Version 6.0 and Version 7.0. In general, the data transfer procedures for version 6 and 7 are the same, but where deviations exist, the differences are noted. The guidance specified in this document will allow a user to have sufficient knowledge to both understand the data format used by SAPHIRE and to carry out the transfer of data between different PRA projects.

  2. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) Data Loading Manual

    SciTech Connect (OSTI)

    C. L. Smith; K. J. Kvarfordt; S. T. Wood

    2006-07-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) is a software application developed for performing a complete probabilistic risk assessment (PRA) using a personal computer. SAPHIRE is primarily funded by the U.S. Nuclear Regulatory Commission (NRC) and developed by the Idaho National Laboratory. This report is intended to assist the user to enter PRA data into the SAPHIRE program using the built-in MAR-D ASCII-text file data transfer process. Towards this end, a small sample database is constructed and utilized for demonstration. Where applicable, the discussion includes how the data processes for loading the sample database relate to the actual processes used to load a larger PRA models. The procedures described herein were developed for use with SAPHIRE Version 6.0 and Version 7.0. In general, the data transfer procedures for version 6 and 7 are the same, but where deviations exist, the differences are noted. The guidance specified in this document will allow a user to have sufficient knowledge to both understand the data format used by SAPHIRE and to carry out the transfer of data between different PRA projects.

  3. Flavor changing neutral currents in the 3-3-1 model with right-handed neutrinos

    SciTech Connect (OSTI)

    Benavides, Richard H.; Giraldo, Yithsbey; Ponce, William A.

    2009-12-01

    Flavor changing neutral currents coming from a new nonuniversal neutral gauge boson and from the nonunitary quark mixing matrix for the SU(3){sub c} x SU(3){sub L} x U(1){sub X} model with right-handed neutrinos are studied. By imposing as experimental constraints the measured values of the 3x3 quark mixing matrix, the neutral meson mixing, and bounds and measured values for direct flavor changing neutral current processes, the largest mixing of the known quarks with the exotic ones can be established, with new sources of flavor changing neutral currents being identified. Our main result is that for a |V{sub tb}| value smaller than 1, large rates of rare top decays such as t{yields}c{gamma}, t{yields}cZ, and t{yields}cg (where g stands for the gluon field) are obtained; but if |V{sub tb}|{approx}1 the model can survive present experimental limits only if the mass of the new neutral gauge bosons becomes larger that 10 TeV.

  4. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) GEM Manual

    SciTech Connect (OSTI)

    C. L. Smith; J. Schroeder; S. T. Beck

    2008-08-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) is a software application developed for performing a complete probabilistic risk assessment (PRA) using a personal computer running the Microsoft Windows? operating system. SAPHIRE is primarily funded by the U.S. Nuclear Regulatory Commission (NRC) and developed by the Idaho National Laboratory (INL). The INL's primary role in this project is that of software developer and tester. Using the SAPHIRE analysis engine and relational database is a complementary program called GEM. GEM has been designed to simplify using existing PRA analysis for activities such as the NRC’s Accident Sequence Precursor program. In this report, the theoretical framework behind GEM-type calculations are discussed in addition to providing guidance and examples for performing evaluations when using the GEM software. As part of this analysis framework, the two types of GEM analysis are outlined, specifically initiating event (where an initiator occurs) and condition (where a component is failed for some length of time) assessments.

  5. NONLINEAR FORCE PROFILE USED TO INCREASE THE PERFORMANCE OF A HAPTIC USER INTERFACE FOR TELEOPERATING A ROBOTIC HAND

    SciTech Connect (OSTI)

    Anthony L. Crawford

    2012-07-01

    MODIFIED PAPER TITLE AND ABSTRACT DUE TO SLIGHTLY MODIFIED SCOPE: TITLE: Nonlinear Force Profile Used to Increase the Performance of a Haptic User Interface for Teleoperating a Robotic Hand Natural movements and force feedback are important elements in using teleoperated equipment if complex and speedy manipulation tasks are to be accomplished in hazardous environments, such as hot cells, glove boxes, decommissioning, explosives disarmament, and space. The research associated with this paper hypothesizes that a user interface and complementary radiation compatible robotic hand that integrates the human hand’s anthropometric properties, speed capability, nonlinear strength profile, reduction of active degrees of freedom during the transition from manipulation to grasping, and just noticeable difference force sensation characteristics will enhance a user’s teleoperation performance. The main contribution of this research is in that a system that concisely integrates all these factors has yet to be developed and furthermore has yet to be applied to a hazardous environment as those referenced above. In fact, the most prominent slave manipulator teleoperation technology in use today is based on a design patented in 1945 (Patent 2632574) [1]. The robotic hand/user interface systems of similar function as the one being developed in this research limit their design input requirements in the best case to only complementing the hand’s anthropometric properties, speed capability, and linearly scaled force application relationship (e.g. robotic force is a constant, 4 times that of the user). In this paper a nonlinear relationship between the force experienced between the user interface and the robotic hand was devised based on property differences of manipulation and grasping activities as they pertain to the human hand. The results show that such a relationship when subjected to a manipulation task and grasping task produces increased performance compared to the

  6. The cardiac dose-sparing benefits of deep inspiration breath-hold in left breast irradiation: a systematic review

    SciTech Connect (OSTI)

    Smyth, Lloyd M; Knight, Kellie A; Aarons, Yolanda K; Wasiak, Jason

    2015-03-15

    Despite technical advancements in breast radiation therapy, cardiac structures are still subject to significant levels of irradiation. As the use of adjuvant radiation therapy after breast-conserving surgery continues to improve survival for early breast cancer patients, the associated radiation-induced cardiac toxicities become increasingly relevant. Our primary aim was to evaluate the cardiac-sparing benefits of the deep inspiration breath-hold (DIBH) technique. An electronic literature search of the PubMed database from 1966 to July 2014 was used to identify articles published in English relating to the dosimetric benefits of DIBH. Studies comparing the mean heart dose of DIBH and free breathing treatment plans for left breast cancer patients were eligible to be included in the review. Studies evaluating the reproducibility and stability of the DIBH technique were also reviewed. Ten studies provided data on the benefits of DIBH during left breast irradiation. From these studies, DIBH reduced the mean heart dose by up to 3.4 Gy when compared to a free breathing approach. Four studies reported that the DIBH technique was stable and reproducible on a daily basis. According to current estimates of the excess cardiac toxicity associated with radiation therapy, a 3.4 Gy reduction in mean heart dose is equivalent to a 13.6% reduction in the projected increase in risk of heart disease. DIBH is a reproducible and stable technique for left breast irradiation showing significant promise in reducing the late cardiac toxicities associated with radiation therapy.

  7. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) Code Reference Manual

    SciTech Connect (OSTI)

    C. L. Smith; K. J. Kvarfordt; S. T. Wood

    2008-08-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) is a software application developed for performing a complete probabilistic risk assessment (PRA) using a personal computer. SAPHIRE is funded by the U.S. Nuclear Regulatory Commission (NRC) and developed by the Idaho National Laboratory (INL). The INL's primary role in this project is that of software developer. However, the INL also plays an important role in technology transfer by interfacing and supporting SAPHIRE users comprised of a wide range of PRA practitioners from the NRC, national laboratories, the private sector, and foreign countries. SAPHIRE can be used to model a complex systems response to initiating events, quantify associated damage outcome frequencies, and identify important contributors to this damage (Level 1 PRA) and to analyze containment performance during a severe accident and quantify radioactive releases (Level 2 PRA). It can be used for a PRA evaluating a variety of operating conditions, for example, for a nuclear reactor at full power, low power, or at shutdown conditions. Furthermore, SAPHIRE can be used to analyze both internal and external initiating events and has special features for transforming models built for internal event analysis to models for external event analysis. It can also be used in a limited manner to quantify risk in terms of release consequences to both the public and the environment (Level 3 PRA). SAPHIRE includes a separate module called the Graphical Evaluation Module (GEM). GEM provides a highly specialized user interface with SAPHIRE that automates SAPHIRE process steps for evaluating operational events at commercial nuclear power plants. Using GEM, an analyst can estimate the risk associated with operational events in a very efficient and expeditious manner. This reference guide will introduce the SAPHIRE Version 7.0 software. A brief discussion of the purpose and history of the software is included along with general

  8. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) Code Reference Manual

    SciTech Connect (OSTI)

    C. L. Smith; K. J. Kvarfordt; S. T. Wood

    2006-07-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) is a software application developed for performing a complete probabilistic risk assessment (PRA) using a personal computer. SAPHIRE is funded by the U.S. Nuclear Regulatory Commission (NRC) and developed by the Idaho National Laboratory (INL). The INL's primary role in this project is that of software developer. However, the INL also plays an important role in technology transfer by interfacing and supporting SAPHIRE users comprised of a wide range of PRA practitioners from the NRC, national laboratories, the private sector, and foreign countries. SAPHIRE can be used to model a complex systems response to initiating events, quantify associated damage outcome frequencies, and identify important contributors to this damage (Level 1 PRA) and to analyze containment performance during a severe accident and quantify radioactive releases (Level 2 PRA). It can be used for a PRA evaluating a variety of operating conditions, for example, for a nuclear reactor at full power, low power, or at shutdown conditions. Furthermore, SAPHIRE can be used to analyze both internal and external initiating events and has special features for ansforming models built for internal event analysis to models for external event analysis. It can also be used in a limited manner to quantify risk in terms of release consequences to both the public and the environment (Level 3 PRA). SAPHIRE includes a separate module called the Graphical Evaluation Module (GEM). GEM provides a highly specialized user interface with SAPHIRE that automates SAPHIRE process steps for evaluating operational events at commercial nuclear power plants. Using GEM, an analyst can estimate the risk associated with operational events in a very efficient and expeditious manner. This reference guide will introduce the SAPHIRE Version 7.0 software. A brief discussion of the purpose and history of the software is included along with general

  9. SU-E-J-33: Cardiac Movement in Deep Inspiration Breath-Hold for Left-Breast Cancer Radiotherapy

    SciTech Connect (OSTI)

    Kim, M; Lee, S; Suh, T

    2014-06-01

    Purpose: The present study was designed to investigate the displacement of heart using Deep Inspiration Breath Hold (DIBH) CT data compared to free-breathing (FB) CT data and radiation exposure to heart. Methods: Treatment planning was performed on the computed tomography (CT) datasets of 20 patients who had received lumpectomy treatments. Heart, lung and both breasts were outlined. The prescribed dose was 50 Gy divided into 28 fractions. The dose distributions in all the plans were required to fulfill the International Commission on Radiation Units and Measurement specifications that include 100% coverage of the CTV with ? 95% of the prescribed dose and that the volume inside the CTV receiving > 107% of the prescribed dose should be minimized. Displacement of heart was measured by calculating the distance between center of heart and left breast. For the evaluation of radiation dose to heart, minimum, maximum and mean dose to heart were calculated. Results: The maximum and minimum left-right (LR) displacements of heart were 8.9 mm and 3 mm, respectively. The heart moved > 4 mm in the LR direction in 17 of the 20 patients. The distances between the heart and left breast ranged from 8.0217.68 mm (mean, 12.23 mm) and 7.8512.98 mm (mean, 8.97 mm) with DIBH CT and FB CT, respectively. The maximum doses to the heart were 3115 cGy and 4652 cGy for the DIBH and FB CT dataset, respectively. Conclusion: The present study has demonstrated that the DIBH technique could help to reduce the risk of radiation dose-induced cardiac toxicity by using movement of cardiac; away from radiation field. The DIBH technique could be used in an actual treatment room for a few minutes and could effectively reduce the cardiac dose when used with a sub-device or image acquisition standard to maintain consistent respiratory motion.

  10. Synthesis and crystal structure of a new open-framework iron phosphate (NH{sub 4}){sub 4}Fe{sub 3}(OH){sub 2}F{sub 2}[H{sub 3}(PO{sub 4}){sub 4}]: Novel linear trimer of corner-sharing Fe(III) octahedra

    SciTech Connect (OSTI)

    Mi, Jin-Xiao; Wang, Cheng-Xin; Chen, Ning; Li, Rong; Pan, Yuanming

    2010-12-15

    A new iron phosphate (NH{sub 4}){sub 4}Fe{sub 3}(OH){sub 2}F{sub 2}[H{sub 3}(PO{sub 4}){sub 4}] has been synthesized hydrothermally at HF concentrations from 0.5 to 1.2 mL. Single-crystal X-ray diffraction analysis reveals its three-dimensional open-framework structure (monoclinic, space group P2{sub 1}/n (No. 14), a=6.2614(13) A, b=9.844(2) A, c=14.271(3) A, {beta}=92.11(1){sup o}, V=879.0(3) A{sup 3}). This structure is built from isolated linear trimers of corner-sharing Fe(III) octahedra, which are linked by (PO{sub 4}) groups to form ten-membered-ring channels along [1 0 0]. This isolated, linear trimer of corner-sharing Fe(III) octahedra, [(FeO{sub 4}){sub 3}(OH){sub 2}F{sub 2}], is new and adds to the diverse linkages of Fe polyhedra as secondary building units in iron phosphates. The trivalent iron at octahedral sites for the title compound has been confirmed by synchrotron Fe K-edge XANES spectra and magnetic measurements. Magnetic measurements also show that this compound exhibit a strong antiferromagnetic exchange below T{sub N}=17 K, consistent with superexchange interactions expected for the linear trimer of ferric octahedra with the Fe-F-Fe angle of 132.5{sup o}. -- Graphical abstract: The three-dimensional open-framework structure of (NH{sub 4}){sub 4}Fe{sub 3}(OH){sub 2}F{sub 2}[H{sub 3}(PO{sub 4}){sub 4}] is built from a novel isolated, linear (FeO{sub 4}){sub 3}(OH){sub 2}F{sub 2} trimer of corner-sharing Fe(III) octahedra linked by PO{sub 4} tetrahedra. Display Omitted

  11. Monitoring ABC-assisted deep inspiration breath hold for left-sided breast radiotherapy with an optical tracking system

    SciTech Connect (OSTI)

    Mittauer, Kathryn E.; Deraniyagala, Rohan; Li, Jonathan G.; Lu, Bo; Liu, Chihray; Samant, Sanjiv S.; Lightsey, Judith L.; Yan, Guanghua

    2015-01-15

    Purpose: Recent knowledge on the effects of cardiac toxicity warrants greater precision for left-sided breast radiotherapy. Different breath-hold (BH) maneuvers (abdominal vs thoracic breathing) can lead to chest wall positional variations, even though the patient’s tidal volume remains consistent. This study aims to investigate the feasibility of using optical tracking for real-time quality control of active breathing coordinator (ABC)-assisted deep inspiration BH (DIBH). Methods: An in-house optical tracking system (OTS) was used to monitor ABC-assisted DIBH. The stability and localization accuracy of the OTS were assessed with a ball-bearing phantom. Seven patients with left-sided breast cancer were included. A free-breathing (FB) computed tomography (CT) scan and an ABC-assisted BH CT scan were acquired for each patient. The OTS tracked an infrared (IR) marker affixed over the patient’s xiphoid process to measure the positional variation of each individual BH. Using the BH within which the CT scan was performed as the reference, the authors quantified intra- and interfraction BH variations for each patient. To estimate the dosimetric impact of BH variations, the authors studied the positional correlation between the marker and the left breast using the FB CT and BH CT scans. The positional variations of 860 BHs as measured by the OTS were retrospectively incorporated into the original treatment plans to evaluate their dosimetric impact on breast and cardiac organs [heart and left anterior descending (LAD) artery]. Results: The stability and localization accuracy of the OTS was within 0.2 mm along each direction. The mean intrafraction variation among treatment BHs was less than 2.8 mm in all directions. Up to 12.6 mm anteroposterior undershoot, where the patient’s chest wall displacement of a BH is less than that of a reference BH, was observed with averages of 4.4, 3.6, and 0.1 mm in the anteroposterior, craniocaudal, and mediolateral directions

  12. Septal myocardial perfusion imaging with thallium-201 in the diagnosis of proximal left anterior descending coronary artery disease

    SciTech Connect (OSTI)

    Pichard, A.D.; Wiener, I.; Martinez, E.; Horowitz, S.; Patterson, R.; Meller, J.; Goldsmith, S.J.; Gorlin, R.; Herman, M.V.

    1981-07-01

    The use of myocardial perfusion imaging (MPI) to identify obstructive coronary disease of the left anterior descending coronary artery proximal to the first septal perforator (prox LAD) was studied in 60 patients. Perfusion of the septum and anteroapical areas with thallium-201 injected during exercise was compared to results of coronary arteriography. Septal MPI defect was found in 92.3% of patients with obstruction of the proximal LAD, 27.7% of patients with obstruction of LAD distal to first septal perforator, 0% in patients with obstructions involving right or circumflex arteries, and in 10.5% of patients without coronary disease. Anteroapical MPI defects were found with similar frequency in the three groups with obstructive coronary disease. Septal MPI defect had a sensitivity of 92.3% and specificity of 85.4% in the diagnosis of proximal LAD disease. Normal septal perfusion with thallium-201 virtually excluded proximal LAD disease.

  13. Precise measurement of the left-right cross section asymmetry in Z boson production by electron-positron collisions

    SciTech Connect (OSTI)

    Frey, R.E.; SLD Collaboration

    1994-03-01

    A precise measurement of the left-right cross section asymmetry (A{sub LR}) for Z boson production by e{sup +}e{sup {minus}} collisions has been attained at the Slac Linear Collider with the SLD detector. We describe this measurement for the 1993 data run, emphasizing the significant improvements in polarized beam operation which took place for this run, where the luminosity-weighted electron beam polarization averaged 62.6 {plus_minus} 1.2 %. Preliminary 1993 results for A{sub LR} are presented. When combined with the (less precise) 1992 result, the preliminary result for the effective weak mixing angle is sin{sup 2} {theta}{sub W {sup eff}} = 0.2290 {plus_minus} 0.0010.

  14. HIA 2015 DOE Zero Energy Ready Home Case Study: Hammer and Hand, Pumpkin Ridge Passive House, North Plains, OR

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hammer and Hand Pumpkin Ridge Passive House North Plains, OR DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced

  15. Quantitative modeling of the accuracy in registering preoperative patient-specific anatomic models into left atrial cardiac ablation procedures

    SciTech Connect (OSTI)

    Rettmann, Maryam E. Holmes, David R.; Camp, Jon J.; Cameron, Bruce M.; Robb, Richard A.; Kwartowitz, David M.; Gunawan, Mia; Johnson, Susan B.; Packer, Douglas L.; Dalegrave, Charles; Kolasa, Mark W.

    2014-02-15

    Purpose: In cardiac ablation therapy, accurate anatomic guidance is necessary to create effective tissue lesions for elimination of left atrial fibrillation. While fluoroscopy, ultrasound, and electroanatomic maps are important guidance tools, they lack information regarding detailed patient anatomy which can be obtained from high resolution imaging techniques. For this reason, there has been significant effort in incorporating detailed, patient-specific models generated from preoperative imaging datasets into the procedure. Both clinical and animal studies have investigated registration and targeting accuracy when using preoperative models; however, the effect of various error sources on registration accuracy has not been quantitatively evaluated. Methods: Data from phantom, canine, and patient studies are used to model and evaluate registration accuracy. In the phantom studies, data are collected using a magnetically tracked catheter on a static phantom model. Monte Carlo simulation studies were run to evaluate both baseline errors as well as the effect of different sources of error that would be present in a dynamicin vivo setting. Error is simulated by varying the variance parameters on the landmark fiducial, physical target, and surface point locations in the phantom simulation studies. In vivo validation studies were undertaken in six canines in which metal clips were placed in the left atrium to serve as ground truth points. A small clinical evaluation was completed in three patients. Landmark-based and combined landmark and surface-based registration algorithms were evaluated in all studies. In the phantom and canine studies, both target registration error and point-to-surface error are used to assess accuracy. In the patient studies, no ground truth is available and registration accuracy is quantified using point-to-surface error only. Results: The phantom simulation studies demonstrated that combined landmark and surface-based registration improved

  16. Type B Accident Investigation Board Report of the Savannah River Site Hand Injury at the Salt Waste Processing Facility on October 6, 2009

    Office of Energy Efficiency and Renewable Energy (EERE)

    This report documents the results of the Type B Accident Investigation Board (Board) investigation of the October 6, 2009, hand injury at the Department of Energy (DOE) Savannah River Site (SRS) Salt Waste Processing Facility construction site.

  17. MO-E-18C-02: Hands-On Monte Carlo Project Assignment as a Method to Teach Radiation Physics

    SciTech Connect (OSTI)

    Pater, P; Vallieres, M; Seuntjens, J

    2014-06-15

    Purpose: To present a hands-on project on Monte Carlo methods (MC) recently added to the curriculum and to discuss the students' appreciation. Methods: Since 2012, a 1.5 hour lecture dedicated to MC fundamentals follows the detailed presentation of photon and electron interactions. Students also program all sampling steps (interaction length and type, scattering angle, energy deposit) of a MC photon transport code. A handout structured in a step-by-step fashion guides student in conducting consistency checks. For extra points, students can code a fully working MC simulation, that simulates a dose distribution for 50 keV photons. A kerma approximation to dose deposition is assumed. A survey was conducted to which 10 out of the 14 attending students responded. It compared MC knowledge prior to and after the project, questioned the usefulness of radiation physics teaching through MC and surveyed possible project improvements. Results: According to the survey, 76% of students had no or a basic knowledge of MC methods before the class and 65% estimate to have a good to very good understanding of MC methods after attending the class. 80% of students feel that the MC project helped them significantly to understand simulations of dose distributions. On average, students dedicated 12.5 hours to the project and appreciated the balance between hand-holding and questions/implications. Conclusion: A lecture on MC methods with a hands-on MC programming project requiring about 14 hours was added to the graduate study curriculum since 2012. MC methods produce “gold standard” dose distributions and slowly enter routine clinical work and a fundamental understanding of MC methods should be a requirement for future students. Overall, the lecture and project helped students relate crosssections to dose depositions and presented numerical sampling methods behind the simulation of these dose distributions. Research funding from governments of Canada and Quebec. PP acknowledges

  18. Rescuing Those Left Behind. Recovering and Characterizing Underdigested Membrane and Hydrophobic Proteins To Enhance Proteome Measurement Depth

    SciTech Connect (OSTI)

    Giannone, Richard J.; Wurch, Louie L.; Podar, Mircea; Hettich, Robert L.

    2015-07-21

    The marine archaeon Nanoarchaeum equitans is dependent on direct physical contact with its host, the hyperthermophile Ignicoccus hospitalis. This interaction is thought to be membrane-associated, involving a myriad of membrane-anchored proteins; proteomic efforts to better characterize this difficult to analyze interface are paramount to uncovering the mechanism of their association. By extending multienzyme digestion strategies that use sample filtration to recover underdigested proteins for reprocessing/consecutive proteolytic digestion, we applied chymotrypsin to redigest the proteinaceous material left over after initial proteolysis with trypsin of sodium dodecyl sulfate (SDS)-extracted I. hospitalis-N. equitansproteins. We show that proteins with increased hydrophobic character, including membrane proteins with multiple transmembrane helices, are enriched and recovered in the underdigested fraction. Chymotryptic reprocessing provided significant sequence coverage gains in both soluble and hydrophobic proteins alike, with the latter benefiting more so in terms of membrane protein representation. These gains were despite a large proportion of high-quality peptide spectra remaining unassigned in the underdigested fraction suggesting high levels of protein modification on these often surface-exposed proteins. Importantly, these gains were achieved without applying extensive fractionation strategies usually required for thorough characterization of membrane-associated proteins and were facilitated by the generation of a distinct, complementary set of peptides that aid in both the identification and quantitation of this important, under-represented class of proteins.

  19. Rescuing Those Left Behind: Recovering and Characterizing Underdigested Membrane and Hydrophobic Proteins To Enhance Proteome Measurement Depth

    SciTech Connect (OSTI)

    Giannone, Richard J.; Wurch, Louie L.; Podar, Mircea; Hettich, Robert L.

    2015-06-25

    The marine archaeon Nanoarchaeum equitans is dependent on direct physical contact with its host, the hyperthermophile Ignicoccus hospitalis. It is thought that this interaction is membrane-associated, involving a myriad of membrane-anchored proteins; proteomic efforts to better characterize this difficult to analyze interface are paramount to uncovering the mechanism of their association. By extending multienzyme digestion strategies that use sample filtration to recover underdigested proteins for reprocessing/consecutive proteolytic digestion, we applied chymotrypsin to redigest the proteinaceous material left over after initial proteolysis with trypsin of sodium dodecyl sulfate (SDS)-extracted I. hospitalis-N. equitansproteins. We show that proteins with increased hydrophobic character, including membrane proteins with multiple transmembrane helices, are enriched and recovered in the underdigested fraction. Chymotryptic reprocessing provided significant sequence coverage gains in both soluble and hydrophobic proteins alike, with the latter benefiting more so in terms of membrane protein representation. Moreover, these gains were despite a large proportion of high-quality peptide spectra remaining unassigned in the underdigested fraction suggesting high levels of protein modification on these often surface-exposed proteins. Importantly, these gains were achieved without applying extensive fractionation strategies usually required for thorough characterization of membrane-associated proteins and were facilitated by the generation of a distinct, complementary set of peptides that aid in both the identification and quantitation of this important, under-represented class of proteins.

  20. Rescuing Those Left Behind: Recovering and Characterizing Underdigested Membrane and Hydrophobic Proteins To Enhance Proteome Measurement Depth

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Giannone, Richard J.; Wurch, Louie L.; Podar, Mircea; Hettich, Robert L.

    2015-06-25

    The marine archaeon Nanoarchaeum equitans is dependent on direct physical contact with its host, the hyperthermophile Ignicoccus hospitalis. It is thought that this interaction is membrane-associated, involving a myriad of membrane-anchored proteins; proteomic efforts to better characterize this difficult to analyze interface are paramount to uncovering the mechanism of their association. By extending multienzyme digestion strategies that use sample filtration to recover underdigested proteins for reprocessing/consecutive proteolytic digestion, we applied chymotrypsin to redigest the proteinaceous material left over after initial proteolysis with trypsin of sodium dodecyl sulfate (SDS)-extracted I. hospitalis-N. equitansproteins. We show that proteins with increased hydrophobic character, includingmore » membrane proteins with multiple transmembrane helices, are enriched and recovered in the underdigested fraction. Chymotryptic reprocessing provided significant sequence coverage gains in both soluble and hydrophobic proteins alike, with the latter benefiting more so in terms of membrane protein representation. Moreover, these gains were despite a large proportion of high-quality peptide spectra remaining unassigned in the underdigested fraction suggesting high levels of protein modification on these often surface-exposed proteins. Importantly, these gains were achieved without applying extensive fractionation strategies usually required for thorough characterization of membrane-associated proteins and were facilitated by the generation of a distinct, complementary set of peptides that aid in both the identification and quantitation of this important, under-represented class of proteins.« less

  1. SHIELDING AND DETECTOR RESPONSE CALCULATIONS PERTAINING TO CATEGORY 1 QUANTITIES OF PLUTONIUM AND HAND-HELD PLASTIC SCINTILLATORS

    SciTech Connect (OSTI)

    Couture, A.

    2013-06-07

    Nuclear facilities sometimes use hand-held plastic scintillator detectors to detect attempts to divert special nuclear material in situations where portal monitors are impractical. MCNP calculations have been performed to determine the neutron and gamma radiation field arising from a Category I quantity of weapons-grade plutonium in various shielding configurations. The shields considered were composed of combinations of lead and high-density polyethylene such that the mass of the plutonium plus shield was 22.7 kilograms. Monte-Carlo techniques were also used to determine the detector response to each of the shielding configurations. The detector response calculations were verified using field measurements of high-, medium-, and low- energy gamma-ray sources as well as a Cf-252 neutron source.

  2. US-ROK Action Sheet 34: Safeguards Application of a Hand-held Mechanically Cooled Germanium Spectrometer

    SciTech Connect (OSTI)

    Dreyer, J.; Burks, M.; Ham, Y.; Kwak, S.

    2015-10-20

    This report summarizes results of Action Sheet 34 - for the cooperative efforts on the field testing and evaluation of a high-resolution, hand-held, gamma-ray spectrometer, known as SPG (Spectroscopic Planar Germanium), for safeguards application such as short notice inspections, UF6 analysis, enrichment determination, and other potential applications. The Spectroscopic Planar Germanium (SPG) has been demonstrated IAEA Physical Inventory Verification (PIV) in South Korea. This field test was a success and the feedback provided by KINAC, IAEA, and national laboratory staff was used to direct efforts to improve the instrument this year. Key points in this report include measurement results from PIV, analysis of spectra with commercially available Ortec U235 and PC-FRAM, and completion of tripod and tungsten collimator and integration of user feedback.

  3. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) Version 5.0: Data loading manual. Volume 10

    SciTech Connect (OSTI)

    VanHorn, R.L.; Wolfram, L.M.; Fowler, R.D.; Beck, S.T.; Smith, C.L.

    1995-04-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) suite of programs can be used to organize and standardize in an electronic format information from probabilistic risk assessments or individual plant examinations. The Models and Results Database (MAR-D) program of the SAPHIRE suite serves as the repository for probabilistic risk assessment and individual plant examination data and information. This report demonstrates by examples the common electronic and manual methods used to load these types of data. It is not a stand alone document but references documents that contribute information relative to the data loading process. This document provides a more detailed discussion and instructions for using SAPHIRE 5.0 only when enough information on a specific topic is not provided by another available source.

  4. A comparative analysis of 3D conformal deep inspiratorybreath hold and free-breathing intensity-modulated radiation therapy for left-sided breast cancer

    SciTech Connect (OSTI)

    Reardon, Kelli A.; Read, Paul W.; Morris, Monica M.; Reardon, Michael A.; Geesey, Constance; Wijesooriya, Krishni

    2013-07-01

    Patients undergoing radiation for left-sided breast cancer have increased rates of coronary artery disease. Free-breathing intensity-modulated radiation therapy (FB-IMRT) and 3-dimensional conformal deep inspiratorybreath hold (3D-DIBH) reduce cardiac irradiation. The purpose of this study is to compare the dose to organs at risk in FB-IMRT vs 3D-DIBH for patients with left-sided breast cancer. Ten patients with left-sided breast cancer had 2 computed tomography scans: free breathing and voluntary DIBH. Optimization of the IMRT plan was performed on the free-breathing scan using 6 noncoplanar tangential beams. The 3D-DIBH plan was optimized on the DIBH scan and used standard tangents. Mean volumes of the heart, the left anterior descending coronary artery (LAD), the total lung, and the right breast receiving 5% to 95% (5% increments) of the prescription dose were calculated. Mean volumes of the heart and the LAD were lower (p<0.05) in 3D-DIBH for volumes receiving 5% to 80% of the prescription dose for the heart and 5% for the LAD. Mean dose to the LAD and heart were lower in 3D-DIBH (p?0.01). Mean volumes of the total lung were lower in FB-IMRT for dose levels 20% to 75% (p<0.05), but mean dose was not different. Mean volumes of the right breast were not different for any dose; however, mean dose was lower for 3D-DIBH (p = 0.04). 3D-DIBH is an alternative approach to FB-IMRT that provides a clinically equivalent treatment for patients with left-sided breast cancer while sparing organs at risk with increased ease of implementation.

  5. Miles Hand Grenade

    DOE Patents [OSTI]

    Harrington, John J.; Buttz, James H.; Maish, Alex B.; Page, Ray R.; Metcalf, Herbert E.

    2005-11-15

    A simulated grenade for MILES-type simulations generates a unique RF signal and a unique audio signal. A detector utilizes the time between receipt of the RF signal and the slower-traveling audio signal to determine the distance between the detector and the simulated grenade.

  6. Hands-On Exercises

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    files you copied to SCRATCH above. hopper% cd SCRATCHtutorialsJGI-Intro hopper% cd hello hopper% make You will see the commands used to compile and link the code. To see the...

  7. Hands-On Exercises

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SSH to hopper.nersc.gov mymachine% ssh -l -Y -A hopper.nersc.gov Look around on ... Copy a file to NERSC from your local machine mymachine% scp @hopper.n...

  8. 2016 All Hands Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... You may park in any yellow permit space in the lot outside ... disembark at the Big Bend station and walk south along Big ... Hall (J-9) 110. Stix International House (F-6) 111. Tau ...

  9. TU-F-17A-06: Motion Stability and Dosimetric Impact of Spirometer-Based DIBH-RT of Left-Sided Breast Cancer

    SciTech Connect (OSTI)

    McKenzie, E; Yang, W; Burnison, M; Mirhadi, A; Hakimian, B; Stephen, S; Robert, R; Yue, Y; Sandler, H; Fraass, B

    2014-06-15

    Purpose: Patients undergoing radiotherapy (RT) for left-sided breast cancer have increased risk of coronary artery disease. Deep Inhalation Breath Hold assisted RT (DIBH-RT) is shown to increase the geometric separation of the target area and heart, reducing cardiac radiation dose. The purposes of this study are to use Cine MV portal images to determine the stability of spirometer-guided DIBH-RT and examine the dosimetric cardiopulmonary impact of this technique. Methods: Twenty consecutive patients with left-sided breast cancer were recruited to the IRB-approved study. Free-breathing (FB) and DIBH-CT's were acquired at simulation. Rigid registration of the FB-CT and DIBH-CT was performed using primarily breast tissue. Treatment plans were created for each FB-CT and DIBH-CT using identical paired tangent fields with field-in-field or electronic compensation techniques. Dosimetric evaluation included mean and maximum (Dmax) doses for the left anterior descending artery (LAD), mean heart dose, and left lung V20. Cine MV portal images were acquired for medial and lateral fields during treatment. Analysis of Cine images involved chest wall segmentation using an algorithm developed in-house. Intra- and inter-fractional chest wall motion were determined through affine registration to the first frame of each Cine. Results: Dose to each cardiac structure evaluated was significantly (p<0.001) reduced with the DIBH plans. Mean heart dose decreased from 2.9(0.96.6) to 1.6(0.65.3) Gy; mean LAD dose from 16.6(343.6) to 7.4(1.732.7) Gy; and LAD Dmax from 35.4 (6.153) to 18.4(2.551.2) Gy. No statistically significant reduction was found for the left lung V20. Average AP and SI median chest wall motion (intrafractional) was 0.1 (SD=0.9) and 0.5 (SD=1.1) mm, respectively. Average AP inter-fractional chest wall motion was 2.0 (SD=1.4) mm. Conclusion: Spirometer-based DIBH treatments of the left breast are reproducible both inter- and intra-fractionally, and provide a

  10. Four dimensional hybrid ultrasound and optoacoustic imaging via passive element optical excitation in a hand-held probe

    SciTech Connect (OSTI)

    Fehm, Thomas Felix; Razansky, Daniel; Den-Ben, Xos Lus

    2014-10-27

    Ultrasonography and optoacoustic imaging share powerful advantages related to the natural aptitude for real-time image rendering with high resolution, the hand-held operation, and lack of ionizing radiation. The two methods also possess very different yet highly complementary advantages of the mechanical and optical contrast in living tissues. Nonetheless, efficient integration of these modalities remains challenging owing to the fundamental differences in the underlying physical contrast, optimal signal acquisition, and image reconstruction approaches. We report on a method for hybrid acquisition and reconstruction of three-dimensional pulse-echo ultrasound and optoacoustic images in real time based on passive ultrasound generation with an optical absorber, thus avoiding the hardware complexity of active ultrasound generation. In this way, complete hybrid datasets are generated with a single laser interrogation pulse, resulting in simultaneous rendering of ultrasound and optoacoustic images at an unprecedented rate of 10 volumetric frames per second. Performance is subsequently showcased in phantom experiments and in-vivo measurements from a healthy human volunteer, confirming general clinical applicability of the method.