National Library of Energy BETA

Sample records for led streetlight luminaires

  1. Successful Selection of LED Streetlight Luminaires: Optimizing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Optimizing Illumination and Economic Performance Successful Selection of LED Streetlight Luminaires: Optimizing Illumination and Economic Performance This March 6, 2013 ...

  2. Successful Selection of LED Streetlight Luminaires: Optimizing Illumination

    Energy Savers [EERE]

    and Economic Performance | Department of Energy Successful Selection of LED Streetlight Luminaires: Optimizing Illumination and Economic Performance Successful Selection of LED Streetlight Luminaires: Optimizing Illumination and Economic Performance This March 6, 2013 webcast reviewed the factors involved in successful selection of LED streetlight luminaires. Presenters Eric Haugaard of Cree Lighting and Chad Stalker of Philips Lumileds guided participants through the modeling of a typical

  3. Text-Alternative Version: Successful Selection of LED Streetlight Luminaires Webcast

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the "Successful Selection of LED Streetlight Luminaires" webcast, held March 6, 2013.

  4. DOE Publishes GATEWAY Report on Portland's LED Streetlight Conversion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Portland's LED Streetlight Conversion DOE Publishes GATEWAY Report on Portland's LED Streetlight Conversion October 5, 2015 - 11:08am Addthis The U.S. Department of Energy has ...

  5. Maintenance Practices for LED Streetlights | Department of Energy

    Office of Environmental Management (EM)

    Information Resources » Webcasts » Maintenance Practices for LED Streetlights Maintenance Practices for LED Streetlights This April 14, 2014 webinar answered important questions about the maintenance and reliability of LED streetlights, and how to take these issues into account when planning and preparing for a transition to LED street lighting. Presenters Glenn Cooper of the City of Boston, Stephen Crume of the City of Seattle, and Patrick Batte of the City of Las Vegas discussed actual field

  6. Report 23: Photometric Testing of White Tunable LED Luminaires...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Report 23: Photometric Testing of White Tunable LED Luminaires Report 23: Photometric Testing of White Tunable LED Luminaires PDF icon caliper23white-tunable-led-luminaires.pdf ...

  7. LED Luminaire Lifetime: Recommendations For Testing and Reporting...

    Energy Savers [EERE]

    LED Luminaire Lifetime: Recommendations For Testing and Reporting LED Luminaire Lifetime: Recommendations For Testing and Reporting PDF icon LED Luminaire Lifetime: September 2014 ...

  8. LED LUMINAIRE LIFETIME: Recommendations for Testing and Reporting |

    Energy Savers [EERE]

    Department of Energy LUMINAIRE LIFETIME: Recommendations for Testing and Reporting LED LUMINAIRE LIFETIME: Recommendations for Testing and Reporting 2011 Solid-State Lighting Product Quality Initiative PDF icon led_luminaire-lifetime-guide_june2011.pdf More Documents & Publications System Reliability Model for Solid-State Lighting Luminaires LED Luminaire Lifetime: Recommendations For Testing and Reporting System Reliability Model for Solid-State Lighting Luminaires

  9. Text-Alternative Version: Maintenance Practices for LED Streetlights |

    Energy Savers [EERE]

    Department of Energy Maintenance Practices for LED Streetlights Text-Alternative Version: Maintenance Practices for LED Streetlights Bruce Kinzey:So again, I want to welcome everyone to another MSSLC webinar. And we have a great one lined up today. At this point everyone is familiar with the fact that the solid-state street lighting is being installed by the thousands, hundreds of thousands in fact, around the country. I think everyone's also pretty familiar with the kinds of energy savings

  10. The City of Los Angeles LED Streetlight Program | Department of Energy

    Energy Savers [EERE]

    Videos » The City of Los Angeles LED Streetlight Program The City of Los Angeles LED Streetlight Program View the video about the Los Angeles LED streetlight program, featuring an interview with City of Los Angeles Bureau of Street Lighting Director, Ed Ebrahimian. View the text-alternative version.

  11. Report 23: Photometric Testing of White Tunable LED Luminaires | Department

    Energy Savers [EERE]

    of Energy 3: Photometric Testing of White Tunable LED Luminaires Report 23: Photometric Testing of White Tunable LED Luminaires PDF icon caliper_23_white-tunable-led-luminaires.pdf More Documents & Publications September 2015 Postings January 2016 POSTINGS 2015 SSL TECHNOLOGY DEVELOPMENT WORKSHOP PRESENTATIONS - Day 2

  12. Upgrading Troffer Luminaires to LED

    SciTech Connect (OSTI)

    none,

    2014-01-31

    Solid-state lighting technology fact sheet providing guidance on the various factors to consider when deciding on an LED upgrade for a fluorescent troffer system.

  13. Reporting LED Luminaire Product Performance

    SciTech Connect (OSTI)

    2008-12-01

    This brochure on LED product performance is an outcome of a joint DOE-NGLIA effort to assure and improve the quality of SSL products.

  14. Model Specification for LED Roadway Luminaires | Department of Energy

    Energy Savers [EERE]

    Research & Development » Technology Application R&D » Municipal Consortium » Resources » Model Specification for LED Roadway Luminaires Model Specification for LED Roadway Luminaires The DOE Municipal Solid-State Street Lighting Consortium's Model Specification for LED Roadway Luminaires enables cities, utilities, and other state and local agencies to assemble effective bid documents for LED street lighting products. The original version of the Model Specification for LED Roadway

  15. Purchasing Energy-Efficient Commercial and Industrial LED Luminaires |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Commercial and Industrial LED Luminaires Purchasing Energy-Efficient Commercial and Industrial LED Luminaires The Federal Energy Management Program (FEMP) provides acquisition guidance for commercial and industrial light emitting diode (LED) luminaires, a product category covered by FEMP efficiency requirements. Federal laws and requirements mandate that agencies purchase ENERGY STAR-qualified or FEMP-designated products in all product categories covered by these

  16. Model Specification for LED Roadway Luminaires Webcast | Department of

    Energy Savers [EERE]

    Energy Webcasts » Model Specification for LED Roadway Luminaires Webcast Model Specification for LED Roadway Luminaires Webcast This November 15, 2011 webcast presented information about the Model Specification for LED Roadway Luminaires developed by DOE's Municipal Solid-State Street Lighting Consortium. During the webcast, Jason Tuenge of Pacific Northwest National Laboratory provided an overview of the model specification and explained how it can be customized to meet the particular

  17. Low-Cost LED Luminaire for General Illumination

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    paulfini@cree.com CREE SBTC Low-Cost LED Luminaire for General Illumination 2014 Building ... end date: 73114 Key Milestones 1. White LED with custom primary optic providing 95% ...

  18. Model Specification for LED Roadway Luminaires, V2.0

    Broader source: Energy.gov [DOE]

    Version 2.0 of the Model Specification for LED Roadway Luminaires is now available. Changes are substantial and include streamlined structure and formatting, new diagrams, updated references, and leveraging of LED Lighting Facts® program guidance.

  19. LED Luminaire Lifetime: Recommendations for Testing and Reporting

    Energy Savers [EERE]

    LED LUMINAIRE LIFETIME: RECOMMENDATIONS FOR TESTING AND REPORTING SOLID-STATE LIGHTING PRODUCT QUALITY INITIATIVE THIRD EDITION SEPTEMBER 2014 Next Generation Lighting Industry Alliance LED Systems Reliability Consortium i TABLE OF CONTENTS Acknowledgements.................................................................................................................................................................................... ii 1 Introduction and summary

  20. High Efficiency Driving Electronics for General Illumination LED Luminaires

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Technical Report) | SciTech Connect High Efficiency Driving Electronics for General Illumination LED Luminaires Citation Details In-Document Search Title: High Efficiency Driving Electronics for General Illumination LED Luminaires New generation of standalone LED driver platforms developed, which are more efficient These LED Drivers are more efficient (≥90%), smaller in size ( 0.15 in3/watt), lower in cost ( 12 cents/watt in high volumes in millions of units). And these products are very

  1. High Efficiency Driving Electronics for General Illumination LED Luminaires

    Office of Scientific and Technical Information (OSTI)

    (Technical Report) | SciTech Connect SciTech Connect Search Results Technical Report: High Efficiency Driving Electronics for General Illumination LED Luminaires Citation Details In-Document Search Title: High Efficiency Driving Electronics for General Illumination LED Luminaires New generation of standalone LED driver platforms developed, which are more efficient These LED Drivers are more efficient (≥90%), smaller in size ( 0.15 in3/watt), lower in cost ( 12 cents/watt in high volumes in

  2. Scalable Light Module for Low-Cost, High Efficiency LED Luminaires...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Scalable Light Module for Low-Cost, High Efficiency LED Luminaires Scalable Light Module for Low-Cost, High Efficiency LED Luminaires Lead Performer: Cree, Inc. - Durham, NC DOE ...

  3. Small Area Array-Based LED Luminaire Design

    SciTech Connect (OSTI)

    Thomas Yuan

    2008-01-09

    This report contains a summary of technical achievements during a three-year project to demonstrate high efficiency LED luminaire designs based on small area array-based gallium nitride diodes. Novel GaN-based LED array designs are described, specifically addressing the thermal, optical, electrical and mechanical requirements for the incorporation of such arrays into viable solid-state LED luminaires. This work resulted in the demonstration of an integrated luminaire prototype of 1000 lumens cool white light output with reflector shaped beams and efficacy of 89.4 lm/W at CCT of 6000oK and CRI of 73; and performance of 903 lumens warm white light output with reflector shaped beams and efficacy of 63.0 lm/W at CCT of 2800oK and CRI of 82. In addition, up to 1275 lumens cool white light output at 114.2 lm/W and 1156 lumens warm white light output at 76.5 lm/W were achieved if the reflector was not used. The success to integrate small area array-based LED designs and address thermal, optical, electrical and mechanical requirements was clearly achieved in these luminaire prototypes with outstanding performance and high efficiency.

  4. Text-Alternative Version: Model Specification for LED Roadway Luminaires Webcast

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the "Model Specification for LED Roadway Luminaires" webcast, held November 15, 2011.

  5. Assessment of LED Technology in Ornamental Post-Top Luminaires. Sacramento, CA

    SciTech Connect (OSTI)

    Tuenge, J. R.; Bryan, M. M.; Bisbee, D. A.

    2011-12-01

    GATEWAY program report on a demonstration of LED ornamental post-top luminaires in a residential part of Sacramento, CA.

  6. LOW-COST LED LUMINAIRE FOR GENERAL ILLUMINATION

    SciTech Connect (OSTI)

    Lowes, Ted

    2014-07-31

    During this two-year Solid-State Lighting (SSL) Manufacturing R&D project Cree developed novel light emitting diode (LED) technologies contributing to a cost-optimized, efficient LED troffer luminaire platform emitting at ~3500K correlated color temperature (CCT) at a color rendering index (CRI) of >90. To successfully achieve program goals, Cree used a comprehensive approach to address cost reduction of the various optical, thermal and electrical subsystems in the luminaire without impacting performance. These developments built on Cree’s high- brightness, low-cost LED platforms to design a novel LED component architecture that will enable low-cost troffer luminaire designs with high total system efficacy. The project scope included cost reductions to nearly all major troffer subsystems as well as assembly costs. For example, no thermal management components were included in the troffer, owing to the optimized distribution of compact low- to mid-power LEDs. It is estimated that a significant manufacturing cost savings will result relative to Cree’s conventional troffers at the start of the project. A chief project accomplishment was the successful development of a new compact, high-efficacy LED component geometry with a broad far-field intensity distribution and even color point vs. emission angle. After further optimization and testing for production, the Cree XQ series of LEDs resulted. XQ LEDs are currently utilized in Cree’s AR series troffers, and they are being considered for use in other platforms. The XQ lens geometry influenced the independent development of Cree’s XB-E and XB-G high-voltage LEDs, which also have a broad intensity distribution at high efficacy, and are finding wide implementation in Cree’s omnidirectional A-lamps.

  7. National Consortium Supports Cities in Evaluating LED Streetlights

    SciTech Connect (OSTI)

    2013-09-30

    Fact sheet that introduces Municipal Solid-State Street Lighting Consortium, a group of municipalities, utilities, and energy efficiency organizations who are interested in making investments in LED street and area lighting.

  8. DOE Publishes CALiPER Snapshot Report on Indoor LED Luminaires

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy's CALiPER program has released a Snapshot Report on indoor LED luminaires, which utilizes the LED Lighting Facts® program's extensive product database to help industry...

  9. DOE Publishes CALiPER Report on the Photometric Testing of White-Tunable LED Luminaires

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy's CALiPER program has released Report 23: Photometric Testing of White-Tunable LED Luminaires, which is the first in a planned series of investigations on color...

  10. Scalable Light Module for Low-Cost, High Efficiency LED Luminaires |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Scalable Light Module for Low-Cost, High Efficiency LED Luminaires Scalable Light Module for Low-Cost, High Efficiency LED Luminaires Lead Performer: Cree, Inc. - Durham, NC DOE Total Funding: $2,349,704 Cost Share: $2,349,704 Project Term: 8/1/2013 - 7/31/2015 Funding Opportunity: SSL Manufacturing R&D Funding Opportunity Announcement (FOA) DE-FOA-000079 Project Objective This project plans to develop a versatile, low-cost, low profile LED light-module architecture

  11. Magical Mystery Devices or Not: How do LED Lamps and Luminaires Really Measure-Up?

    SciTech Connect (OSTI)

    Paget, Maria L.; McCullough, Jeffrey J.; Steward, Heidi E.

    2008-08-15

    Solid-state lighting products for general lighting applications are now gaining a market presence, and more and more people are asking, “Which of these are ‘good’ products? Do they perform as claimed? How do they compare? Light Emitting Diodes (LEDs) differ from other light sources enough to require new procedures for measuring their performance and comparing to other lighting options, so both manufacturers and buyers are facing a learning curve. The energy-efficiency community has traditionally compared light sources based on system efficacy: rated lamp lumens divided by power into the system. This doesn’t work for LEDs because there are no standard LED “lamp” packages and no lamp ratings, and because LED performance depends heavily on thermal, electrical, and optical design of complete lighting unit or ‘luminaire’. Luminaire efficacy is the preferred metric for LEDs because it measures the net light output from the luminaire divided by power into the system.

  12. CALiPER Snapshot Report: Indoor LED Luminaires

    SciTech Connect (OSTI)

    2014-04-01

    Snapshot reports use data from DOE's LED Lighting Facts product list to compare the LED performance to standard technologies, and are designed to help lighting retailers, distributors, designers, utilities, energy efficiency program sponsors, and other stakeholders understand the current state of the LED market and its trajectory.

  13. An Integrated Solid-State LED Luminaire for General Lighting

    SciTech Connect (OSTI)

    Kevin Dowling; Fritz Morgan Ihor Lys; Mike Datta; Bernd Keller; Thomas Yuan

    2009-03-31

    A strong systems approach to designing and building practical LED-based replacement lamps is lacking. The general method of taking high-performance LEDs and marrying them to standard printed circuit boards, drivers and a heat sink has fallen short of the promise of LED lighting. In this program, a top-down assessment of requirements and a bottom-up reinvention of LED sources, electronics, optics and mechanics have resulted in the highest performance lamp possible. The team, comprised of Color Kinetics, the leaders in LED lighting and Cree, the leaders in LED devices took an approach to reinvent the package, the driver and the overall form and aesthetic of a replacement source. The challenge was to create a new benchmark in LED lighting - the resultant lamp, a PAR38 equivalent, met the light output, color, color quality and efficacy marks set out in the program as well as being dimmable, which is important for market acceptance. The approach combined the use of multiple source die, a chip-on-board approach, a very efficient driver topology, the use of both direct emission and phosphor conversion, and a unique faceted optic to avoid the losses, artifacts and hotspots of lensed approaches. The integral heat sink provided a mechanical base and airflow using a chimney-effect for use in a wide variety of locations and orientations. These research results led to a much better understanding of the system effects of component level technologies. It was clear that best-of-breed sub-system results do not necessarily result in the best end result for the complete system. In doing this work, we did not neglect the practical aspects of these systems. These were not rarified results and commercially impractical but lent themselves to eventual commercial products in the marketplace. The end result - a high performance replacement lamp - will save significant energy while providing a high-quality light source.

  14. Scalable Light Module for Low-Cost, High Efficiency LED Luminaires

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Award #DE-EE0006264 Paul Fini, paul_fini@cree.com CREE, Inc. Scalable Light Module for Low-Cost, High Efficiency LED Luminaires 2015 Building Technologies Office Peer Review 2 Project Summary Timeline: Start date: 8/1/13 Planned end date: 7/31/15 Key Milestones: 1. LED efficacy of >150 LPW at 25°C, 35 A/cm 2 , 3000K CCT, >90CRI [Met by 7/31/14 due date] 2. Identify two or more viable candidate manufacturing processes [Met by 7/31/14 due date] 3. Achieve net Light Module optical efficiency

  15. Assessment of LED Technology in Ornamental Post-Top Luminaires (Host Site: Sacramento, CA)

    SciTech Connect (OSTI)

    Tuenge, Jason R.

    2011-12-01

    The DOE Municipal Solid-State Street Lighting Consortium has evaluated four different LED replacements for existing ornamental post-top street lights in Sacramento, California. The project team was composed of the City and its consultant, PNNL (representing the Consortium), and the Sacramento Municipal Utility District. Product selection was finalized in March 2011, yielding one complete luminaire replacement and three lamp-ballast retrofit kits. Computer simulations, field measurements, and laboratory testing were performed to compare the performance and cost-effectiveness of the LED products relative to the existing luminaire with 100 W high-pressure sodium lamp. After it was confirmed the LED products were not equivalent to HPS in terms of initial photopic illumination, the following parameters were scaled proportionally to enable equitable (albeit hypothetical) comparisons: light output, input wattage, and pricing. Four replacement scenarios were considered for each LED product, incorporating new IES guidance for mesopic multipliers and lumen maintenance extrapolation, but life cycle analysis indicated cost effectiveness was also unacceptable. Although LED efficacy and pricing continue to improve, this project serves as a timely and objective notice that LED technology may not be quite ready yet for such applications.

  16. DOE Publishes GATEWAY Report on Portland’s LED Streetlight Conversion

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy has released a GATEWAY report on the experiences of the City of Portland, OR, in converting its street lighting from high-pressure sodium to LED. Such largescale...

  17. Demonstration Assessment of Light Emitting Diode (LED) Street Lighting,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Final Report | Department of Energy Demonstration Assessment of Light Emitting Diode (LED) Street Lighting, Final Report Demonstration Assessment of Light Emitting Diode (LED) Street Lighting, Final Report This report summarizes an LED street lighting assessment project conducted to study the applicability of LED luminaires in a street lighting application. PDF icon emerging_tech_report_led_streetlighting.pdf More Documents & Publications Effective White Light Options for Parking Area

  18. Retrofitting the Streetlights in Boise, Idaho

    ScienceCinema (OSTI)

    Young, Clay; Oliver, LeAnn; Bieter, David; Johnson, Michael; Oldemeyer, Neal

    2013-05-29

    Boise, Idaho is using an energy efficiency grant to retrofit hundreds of streetlights throughout the downtown area with energy-efficient LED bulbs, which will save money and improve safety and local quality of life.

  19. Retrofitting the Streetlights in Boise, Idaho

    Broader source: Energy.gov [DOE]

    Boise, Idaho is using an energy efficiency grant to retrofit hundreds of streetlights throughout the downtown area with energy-efficient LED bulbs, which will save money and improve safety and...

  20. Long-term Testing Results for the 2008 Installation of LED Luminaires at the I-35 West Bridge in Minneapolis

    SciTech Connect (OSTI)

    Kinzey, Bruce R.; Davis, Robert G.

    2014-09-30

    This document reports the long-term testing results from an extended GATEWAY project that was first reported in “Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting at the I-35W Bridge, in Minneapolis, MN,” August 2009. That original report presented the results of lighting the newly reconstructed I 35W Bridge using LEDs in place of conventional high-pressure sodium (HPS) roadway luminaires, comparing energy use and illuminance levels with a simulated baseline condition. That installation was an early stage implementation of LED lighting and remains one of the oldest installations in continued operation today. This document provides an update of the LED system’s performance since its installation in September 2008.

  1. Demonstration of LED Street Lighting in Kansas City, MO Kinzey...

    Office of Scientific and Technical Information (OSTI)

    Street Lighting in Kansas City, MO Kinzey, Bruce R.; Royer, Michael P.; Hadjian, M.; Kauffman, Rick LED streetlighting; field illuminance measurement LED streetlighting; field...

  2. Next Generation Luminaire (NGL) Downlight Demonstration Project...

    Energy Savers [EERE]

    The U.S. DOE conducts demonstration projects documenting the performance of LED luminaires relative to conventional technologies to increase market adoption of energy-efficient LED ...

  3. Energy Department Announces Winners of Next Generation Luminaires...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Serviceability for its M36 LED My White color-tuning luminaire, and Outstanding for Versatility for its Olivio LED Sistema 2 pole-mounted pedestrian-scale luminaire. ...

  4. RTI International Develops SSL Luminaire Reliability Model | Department of

    Energy Savers [EERE]

    Energy R&D Highlights » RTI International Develops SSL Luminaire Reliability Model RTI International Develops SSL Luminaire Reliability Model Photo of LED luminaires and individual LEDs mounted on heat sinks in test chamber" as alt text. With the help of DOE funding, RTI International is developing and validating accelerated life testing (ALT) methodologies and a reliability model for predicting the lifetime of integrated solid-state lighting luminaires. Since data is essential to

  5. Energy Efficiency of LEDs

    Broader source: Energy.gov [DOE]

    This fact sheet discusses the current state of the LED market and discusses package efficacy, luminaire efficacy, and application efficacy.

  6. Next Generation Luminaires Design Competition Announces 2014...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in Class for its Slot 2 & 4 LED-Direct and Bi-Direct family of surface mounted and pendant linear luminaires. More information on all the winning entries is available at http:...

  7. Next Generation Luminaire (NGL) Downlight Demonstration Project: St.

    Energy Savers [EERE]

    Anthony's Hospital | Department of Energy Luminaire (NGL) Downlight Demonstration Project: St. Anthony's Hospital Next Generation Luminaire (NGL) Downlight Demonstration Project: St. Anthony's Hospital The U.S. DOE conducts demonstration projects documenting the performance of LED luminaires relative to conventional technologies to increase market adoption of energy-efficient LED systems and to stimulate ongoing product development. These demonstration projects evaluate various aspects of

  8. Demonstration of LED Street Lighting in Kansas City, MO

    SciTech Connect (OSTI)

    Kinzey, Bruce R.; Royer, Michael P.; Hadjian, M.; Kauffman, Rick

    2013-06-10

    Nine different streetlighting products were installed on various streets in Kansas City, Missouri during February, 2011, to evaluate their performance relative to the incumbent high-pressure sodium (HPS) lighting. The applications investigated included 100 W, 150 W, 250 W, and 400 W HPS installations. Initial measurements and comparisons included power, illuminance, and luminance; sample illuminance readings have continued at each of the nine locations at roughly 1,000-hour operating intervals since then. All of the LED products consumed less power than their HPS counterparts—with a mean difference of 39% and a range of 31% to 51%—but they also emitted 31% fewer lumens, on average. The net result is just a 15% increase in mean efficacy. Applying the city’s stringent light loss factors to the initial measured data meant that five of the LED products (and two of the HPS luminaires) were predicted to eventually fail to meet the specified mean illuminance over their lifetimes; however, the specified light loss levels are not expected to be reached by the LED products until some distant future date (between 12 and 30 years after installation according to manufacturer specification sheet estimates). The practical value of designing streetlighting systems to meet illumination requirements more than 15 years in the future is questioned. Numerous sources of variation in field measurements are noted throughout the report, particularly seasonal influences such as ambient temperature and foliage that are evident in the time-series illuminance data.

  9. Next Generation Luminaires Design Competition Announces 2014 Indoor Winners

    Broader source: Energy.gov [DOE]

    Winners in the Indoor category of the sixth annual Next Generation LuminairesTM Design Competition were announced today at The LED Show in Los Angeles. Sponsored by DOE, the Illuminating...

  10. Thermal trim for luminaire

    DOE Patents [OSTI]

    Bazydola, Sarah; Ghiu, Camil-Daniel; Harrison, Robert; Jeswani, Anil

    2013-11-19

    A luminaire with a thermal pathway to reduce the junction temperature of the luminaire's light source, and methods for so doing, are disclosed. The luminaire includes a can, a light engine, and a trim, that define a substantially continuous thermal pathway from the light engine to a surrounding environment. The can defines a can cavity and includes a can end region. The light engine is within the can cavity and includes a light source and a heat sink, including a heat sink end region, coupled thereto. The trim is at least partially disposed within the can cavity and includes a first trim end region coupled to the heat sink end region and a second trim end region coupled to the can end region. Thermal interface material may be located between: the heat sink and the trim, the trim and the can, and/or the heat sink and the light source.

  11. A Practical Primer to LED Technology | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A Practical Primer to LED Technology A Practical Primer to LED Technology PDF icon A Practical Primer to LED Technology More Documents & Publications LED LUMINAIRE LIFETIME: ...

  12. Insights into accelerated aging of SSL luminaires

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Davis, J. Lynn; Lamvik, Michael; Bittle, James; Shepherd, Sarah; Yaga, Robert; Baldasaro, Nick; Solano, Eric; Bobashev, Georgiy

    2013-09-30

    Although solid-state lighting (SSL) products are often intended to have product lifetimes of 15 years or more, the rapid change in technology has created a need for accelerated life tests (ALTs) that can be performed in the span of several months. A critical element of interpreting results from any systems-level ALT is understanding of the impact of the test environment on each component. Because of its ubiquity in electronics, the use of temperature-humidity environments as potential ALTs for SSL luminaires was investigated. Results from testing of populations of three commercial 6” downlights in environments of 85oC and 85% relative humiditymore » (RH) and 75oC and 75% RH are reported. These test environments were found to accelerate lumen depreciation of the entire luminaire optical system, including LEDs, lenses, and reflectors. The effects of aging were found to depend strongly on both the optical materials that were used and the design of the luminaire; this shows that the lumen maintenance behavior of SSL luminaires must be addressed at the optical systems level. Temperature-Humidity ALTs can be a useful test in understand lumainaire depreciation provided that proper consideration is given to the different aging rates of various materials. Since the impact of the temperature-humidity environment varies among components of the optical system, uniform aging of all system components in a single test is difficult to achieve.« less

  13. Insights into accelerated aging of SSL luminaires

    SciTech Connect (OSTI)

    Davis, J. Lynn; Lamvik, Michael; Bittle, James; Shepherd, Sarah; Yaga, Robert; Baldasaro, Nick; Solano, Eric; Bobashev, Georgiy

    2013-09-30

    Although solid-state lighting (SSL) products are often intended to have product lifetimes of 15 years or more, the rapid change in technology has created a need for accelerated life tests (ALTs) that can be performed in the span of several months. A critical element of interpreting results from any systems-level ALT is understanding of the impact of the test environment on each component. Because of its ubiquity in electronics, the use of temperature-humidity environments as potential ALTs for SSL luminaires was investigated. Results from testing of populations of three commercial 6 downlights in environments of 85oC and 85% relative humidity (RH) and 75oC and 75% RH are reported. These test environments were found to accelerate lumen depreciation of the entire luminaire optical system, including LEDs, lenses, and reflectors. The effects of aging were found to depend strongly on both the optical materials that were used and the design of the luminaire; this shows that the lumen maintenance behavior of SSL luminaires must be addressed at the optical systems level. Temperature-Humidity ALTs can be a useful test in understand lumainaire depreciation provided that proper consideration is given to the different aging rates of various materials. Since the impact of the temperature-humidity environment varies among components of the optical system, uniform aging of all system components in a single test is difficult to achieve.

  14. GATEWAY Demonstrations: LED Street Lighting

    SciTech Connect (OSTI)

    Cook, Tyson; Shackelford, Jordan; Pang, Terrance Pang

    2008-12-01

    This report summarizes an assessment project conducted to study the performance of light emitting diode (LED) luminaires in a street lighting application in San Francisco, CA.

  15. Dutch Company Powers Streetlights With Living Plants; Will Your...

    Open Energy Info (EERE)

    Dutch Company Powers Streetlights With Living Plants; Will Your Cell Phone Be Next? Home > Groups > OpenEI Community Central Dc's picture Submitted by Dc(266) Contributor 16...

  16. Next Generation Luminaires Design Competition Announces 2013...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Next Generation Luminaires Design Competition Announces 2013 Outdoor Winners Next Generation Luminaires Design Competition Announces 2013 Outdoor Winners February 27, 2014 -...

  17. Next Generation Luminaires Design Competition Announces 2015...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Next Generation Luminaires Design Competition Announces 2015 Winners Next Generation Luminaires Design Competition Announces 2015 Winners May 5, 2015 - 2:17pm Addthis Winners in ...

  18. SPECIFYING LED COLOR-TUNABLE PRODUCTS | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SPECIFYING LED COLOR-TUNABLE PRODUCTS SPECIFYING LED COLOR-TUNABLE PRODUCTS Specifying LED color-tunable luminaires is dependent on being able to make accurate comparisons between ...

  19. Municipal Consortium Releases Updated Model Specification for LED Roadway

    Energy Savers [EERE]

    Luminaires | Department of Energy for LED Roadway Luminaires Municipal Consortium Releases Updated Model Specification for LED Roadway Luminaires July 10, 2014 - 10:23am Addthis The U.S. Department of Energy's Municipal Solid-State Street Lighting Consortium (MSSLC) has released the first updated version of its Model Specification for LED Roadway Luminaires. A "living document" that's updated as needed to reflect changes in technologies and associated standards, and to incorporate

  20. Ultra-Compact High-Efficiency Luminaire for General Illumination

    SciTech Connect (OSTI)

    Ted Lowes

    2012-04-08

    Cree has developed a new ultra-compact light emitting diode (LED) luminaire capable of providing high efficacy with excellent color quality that can lead to significant energy savings in today??s commercial and retail applications. This success was based on an integrated development effort tailoring the LED component characteristics, optics, thermal management and driver design for the small footprint to achieve an overall system efficiency of ? 70%. A new LED component was designed to provide high brightness and efficacy in a form factor that allowed for a small directional beam with a luminaire housing design able to dissipate the heat effectively using a small physical envelope. A very compact, 90% efficient driver was developed to meet the system performance while not taking away any thermal mass from the heat sink. A 91% efficient secondary optics was designed to maximize efficiency while providing a smooth beam. The reliability of the new LED component was robust under accelerated testing conditions. Luminaires were assembled integrating the novel LED component, secondary optics, heat sink and driver technology to demonstrate the system improvement. Cree has successfully completed this project by developing an ultra-compact LED luminaire that provided 380 lumens at a correlated color temperature (CCT) of 2822 K and color rendering index (CRI) of 94 with an efficacy of 94 lumens per watt (LPW) when operating at 4 W input power (steady state) with an overall system efficiency of 81%. At a higher input power of 9 Watts, the lamp provided 658 lumens at 71 LPW.

  1. System Reliability for LED-Based Products

    SciTech Connect (OSTI)

    Davis, J Lynn; Mills, Karmann; Lamvik, Michael; Yaga, Robert; Shepherd, Sarah D; Bittle, James; Baldasaro, Nick; Solano, Eric; Bobashev, Georgiy; Johnson, Cortina; Evans, Amy

    2014-04-07

    Results from accelerated life tests (ALT) on mass-produced commercially available 6” downlights are reported along with results from commercial LEDs. The luminaires capture many of the design features found in modern luminaires. In general, a systems perspective is required to understand the reliability of these devices since LED failure is rare. In contrast, components such as drivers, lenses, and reflector are more likely to impact luminaire reliability than LEDs.

  2. Energy Efficiency of LEDs

    SciTech Connect (OSTI)

    2013-03-01

    Solid-state lighting program technology fact sheet on energy efficiency of LEDs, characterizing the current state of the market and discussing package efficacy, luminaire efficacy, and application efficacy.

  3. CONTROLLING LED COLOR-TUNABLE PRODUCTS | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CONTROLLING LED COLOR-TUNABLE PRODUCTS CONTROLLING LED COLOR-TUNABLE PRODUCTS photo of a conference room. Controlling color-tunable luminaires can be challenging for specifiers,...

  4. LED Performance Under Tough Conditions

    Broader source: Energy.gov [DOE]

    December 2015 LD+A magazine article entitled "LED Performance Under Tough Conditions" discussing three Dept of Energy GATEWAY applications that show how LED luminaires respond to rigorous outdoor environments.

  5. DOE Announces Webinars on Maintenance Practices for LED Streetlights...

    Broader source: Energy.gov (indexed) [DOE]

    ... Learn how to join the webinar. Past Webinars April 2: Live Webinar on Renewable Energy Project Development and Finance Framework: The Five-Step Process Webinar Sponsors: EERE's ...

  6. Thermal trim for a luminaire

    DOE Patents [OSTI]

    Bazydola, Sarah; Ghiu, Camil-Daniel; Harrison, Robert; Jeswani, Anil

    2013-02-19

    A luminaire with a thermal pathway to reduce the junction temperature of the luminaire's light source, and methods for so doing, are disclosed. The luminaire includes a can, a light engine, and a trim, that define a substantially continuous thermal pathway from the light engine to a surrounding environment. The can defines a can cavity and includes a can end region. The light engine is within the can cavity and includes a light source and a heat sink, including a heat sink end region, coupled thereto. The trim is at least partially disposed within the can cavity and includes a first trim end region coupled to the heat sink end region and a second trim end region coupled to the can end region. Thermal interface material may be located between: the heat sink and the trim, the trim and the can, and/or the heat sink and the light source.

  7. EECBG Success Story: Shining Energy-Saving LEDs on Utah Starry Nights

    Broader source: Energy.gov [DOE]

    Thanks to an Energy Efficiency and Conservation Block Grant (EECBG), Utah is replacing streetlights with efficient LEDs across 14 rural communities. About 2,500 streetlights will be replaced and could save the town 20% to 50% on electricity bills. Learn more.

  8. SSL Luminaire Performance in the Lab: Just How Well Do They Perform? |

    Energy Savers [EERE]

    Department of Energy SSL Luminaire Performance in the Lab: Just How Well Do They Perform? SSL Luminaire Performance in the Lab: Just How Well Do They Perform? On December 13, 2007, Mia Paget, Pacific Northwest National Laboratory, gave an overview of the Commercially Available LED Product Evaluation and Reporting (CALiPER) Program, test procedures for SSL products, and recent test results. CALiPER provides objective product performance information, helping buyers and specifiers have

  9. Covered Product Category: Fluorescent Luminaires

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including fluorescent luminaires. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  10. Application Assessment of Bi-Level LED Parking Lot Lighting

    SciTech Connect (OSTI)

    Johnson, Megan; Cook, Tyson; Shackelford, Jordan; Pang, Terrance

    2009-02-01

    This report summarizes an assessment project conducted to evaluate light-emitting diode (LED) luminaires with bi-level operation in an outdoor parking lot application.

  11. Next Generation Luminaire (NGL) Downlight Demonstration Project, Hilton Columbus Downtown

    SciTech Connect (OSTI)

    Davis, R. G.; Perrin, T. E.

    2014-09-30

    At the Hilton Columbus Downtown hotel in Ohio, DOE's Better Buildings Alliance conducted a demonstration of Next Generation Luminaires-winning downlights installed in all guest rooms and suites prior to the hotel's 2012 opening. After a post-occupancy assessment, the LED downlights not only provided the aesthetic appearance and dimming functionality desired, but also provided 50% energy savings relative to a comparable CFL downlight and enabled the lighting power to be more than 20% below that allowed by code.

  12. UNDERSTANDING LED COLOR-TUNABLE PRODUCTS

    Broader source: Energy.gov [DOE]

    LED luminaires with the ability to deliver varying light color have been on the architectural lighting market since the early days of LED lighting, but improved efficacy, colors, controls, and...

  13. Demonstration Assessment of Light-Emitting Diode (LED) Post-Top Lighting at Central Park in New York City

    SciTech Connect (OSTI)

    Myer, Michael; Goettel, Russell T.; Kinzey, Bruce R.

    2012-09-30

    A review of five post-top light-emitting diode (LED) pedestrian luminaires installed in New York City's Central Park for possible replacement to the existing metal halide post-top luminaire. This report reviews the energy savings potential and lighting delivered by the LED post-top luminaires.

  14. LED COLOR-TUNABLE PRODUCTS | Department of Energy

    Office of Environmental Management (EM)

    CALiPER Testing » Application Reports » LED COLOR-TUNABLE PRODUCTS LED COLOR-TUNABLE PRODUCTS UNDERSTANDING, LED Color-Tunable Products SPECIFYING, LED Color-Tunable Products CONTROLLING, LED Color-Tunable Products TESTING, LED Color-Tunable Products Color-tunable LED luminaires are a nascent and growing product category. Beyond the inherent energy efficiency of LEDs, these luminaires offer other potential benefits including improved health and well-being, increased productivity, enhanced mood

  15. OLED Luminaire with Panel Integrated Drivers and Advanced Controls...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OLED Luminaire with Panel Integrated Drivers and Advanced Controls OLED Luminaire with Panel Integrated Drivers and Advanced Controls Lead Performer: Acuity Brands Lighting - ...

  16. Covered Product Category: Fluorescent Luminaires | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fluorescent Luminaires Covered Product Category: Fluorescent Luminaires The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for fluorescent luminaires. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law. Meeting Energy Efficiency Requirements for Fluorescent Luminaires Federal purchases must meet or exceed the minimum

  17. Covered Product Category: Light Fixtures (Luminaires) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Light Fixtures (Luminaires) Covered Product Category: Light Fixtures (Luminaires) The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for light fixtures or luminaires. The luminaires product category is very broad and covers a wide variety of lighting products. Both ENERGY STAR and FEMP provide programmatic guidance for various types of luminaires. See Table 2 for more information about which types of light fixtures are

  18. Scalable Light Module for Low-Cost, High-Efficiency Light- Emitting Diode Luminaires

    SciTech Connect (OSTI)

    Tarsa, Eric

    2015-08-31

    During this two-year program Cree developed a scalable, modular optical architecture for low-cost, high-efficacy light emitting diode (LED) luminaires. Stated simply, the goal of this architecture was to efficiently and cost-effectively convey light from LEDs (point sources) to broad luminaire surfaces (area sources). By simultaneously developing warm-white LED components and low-cost, scalable optical elements, a high system optical efficiency resulted. To meet program goals, Cree evaluated novel approaches to improve LED component efficacy at high color quality while not sacrificing LED optical efficiency relative to conventional packages. Meanwhile, efficiently coupling light from LEDs into modular optical elements, followed by optimally distributing and extracting this light, were challenges that were addressed via novel optical design coupled with frequent experimental evaluations. Minimizing luminaire bill of materials and assembly costs were two guiding principles for all design work, in the effort to achieve luminaires with significantly lower normalized cost ($/klm) than existing LED fixtures. Chief project accomplishments included the achievement of >150 lm/W warm-white LEDs having primary optics compatible with low-cost modular optical elements. In addition, a prototype Light Module optical efficiency of over 90% was measured, demonstrating the potential of this scalable architecture for ultra-high-efficacy LED luminaires. Since the project ended, Cree has continued to evaluate optical element fabrication and assembly methods in an effort to rapidly transfer this scalable, cost-effective technology to Cree production development groups. The Light Module concept is likely to make a strong contribution to the development of new cost-effective, high-efficacy luminaries, thereby accelerating widespread adoption of energy-saving SSL in the U.S.

  19. Covered Product Category: Light Fixtures (Luminaires)

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including luminaires, or light fixtures. The luminaires product category is very broad and covers a wide variety of lighting products. Both ENERGY STAR® and FEMP provide programmatic guidance for various types of luminaires. See table 2 for more information about which types of light fixtures are covered by which program (FEMP or ENERGY STAR). Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  20. LED Outdoor Area Lighting Fact Sheet

    SciTech Connect (OSTI)

    2008-06-01

    This fact sheet reviews the major design and specification concerns for outdoor area lighting, and discusses the potential for LED luminaires to save energy while providing high quality lighting for outdoor areas.

  1. SPECIFYING LED COLOR-TUNABLE PRODUCTS

    Broader source: Energy.gov [DOE]

    Specifying LED color-tunable luminaires is dependent on being able to make accurate comparisons between products. Yet reporting performance values for color-tunable products is much more...

  2. Demonstration Assessment of Light-Emitting Diode (LED) Area Lights for a Commercial Garage

    SciTech Connect (OSTI)

    2008-11-01

    This U.S. Department of Energy GATEWAY Demonstration project studied the applicability of light-emitting diode (LED) luminaires for commercial parking garage applications.

  3. DOE Announces Webinars on Maintenance Practices for LED Streetlights, LED Color Stability, and More

    Broader source: Energy.gov [DOE]

    EERE offers webinars to the public on a range of subjects, from adopting the latest energy efficiency and renewable energy technologies to training for the clean energy workforce. View this week's webinars.

  4. Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting on Residential and Commercial Streets in Palo Alto, CA

    SciTech Connect (OSTI)

    Myer, Michael; Kinzey, Bruce R.; Tam, Christine

    2010-06-24

    This report is part of a GATEWAY demonstration that replaced existing HPS streetlights with two different types of LED products and one induction product. Energy savings ranged from 6% to 44%.

  5. NOVEL TECHNOLOGIES DEVELOPED BY CREE LOWER THE COST OF HIGH-PERFORMANCE LED TROFFERS ON THE MARKET

    Broader source: Energy.gov [DOE]

    Cree used a comprehensive approach to reduce the costs of various optical, thermal, and electrical subsystems without impacting performance, resulting in an LED troffer luminaire platform emitting...

  6. Demonstration Assessment of LED Roadway Lighting: Philadelphia, PA

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Technical Report) | SciTech Connect Demonstration Assessment of LED Roadway Lighting: Philadelphia, PA Citation Details In-Document Search Title: Demonstration Assessment of LED Roadway Lighting: Philadelphia, PA For this demonstration assessment, 10 different groups of LED luminaires were installed at three sites in Philadelphia, PA. Each of the three sites represented a different set of conditions, most importantly with regard to the incumbent HPS luminaires, which were nominally 100 W,

  7. Next Generation Luminaires: Recognizing Innovative, Energy-Efficient Commercial Lighting Luminaires

    SciTech Connect (OSTI)

    2013-04-01

    Fact sheet that describes the Next Generation Luminaires SSL lighting design competition, which recognizes excellence in technical innovation and design of high-quality, energy-efficient commercial lighting, both indoor and outdoor.

  8. LED Market Adoption: Status and Trends

    Energy Savers [EERE]

    (lmW) 67 60 CCT (K) 3000 3500 L 70 (hours) 28,000 36,000 Price (unit) 23 30 18 LED Linear Fixtures 19 T12 26% T8 67% T5 7% LED Lamp <1% LED Luminaire <1% 2012 T12 17% T8 72%...

  9. Financing Guidance for LED Street Lighting Programs | Department of Energy

    Office of Environmental Management (EM)

    Financing Guidance for LED Street Lighting Programs Financing Guidance for LED Street Lighting Programs photo of an urban roadway at night lined with LED streetlights. Financing an LED street lighting replacement program can present a hurdle for many system owners, even if the planned transition offers very favorable economics. Replacing the existing system requires a significant budget, particularly as the scope of the program increases. Cities such as Los Angeles and Seattle have invested many

  10. Solid State Lighting LED Product Development and Manufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... The FY17 milestone remains a good target for luminaires. The typical price of a 3,500 lumen 2'x4' LED troffer at 100 lmW is currently about 90-95 per unit, however work is ...

  11. Integrated LED-based luminare for general lighting

    DOE Patents [OSTI]

    Dowling, Kevin J.; Lys, Ihor A.; Roberge, Brian; Williamson, Ryan C.; Roberts, Ron; Datta, Michael; Mollnow, Tomas; Morgan, Frederick M.

    2013-03-05

    Lighting apparatus and methods employing LED light sources are described. The LED light sources are integrated with other components in the form of a luminaire or other general purpose lighting structure. Some of the lighting structures are formed as Parabolic Aluminum Reflector (PAR) luminaires, allowing them to be inserted into conventional sockets. The lighting structures display beneficial operating characteristics, such as efficient operation, high thermal dissipation, high output, and good color mixing.

  12. Purchasing Energy-Efficient Ceiling-Mounted Fluorescent Luminaires |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Ceiling-Mounted Fluorescent Luminaires Purchasing Energy-Efficient Ceiling-Mounted Fluorescent Luminaires The Federal Energy Management Program (FEMP) provides acquisition guidance for ceiling-mounted fluorescent luminaires, a product category covered by FEMP efficiency requirements. Federal laws and requirements mandate that agencies purchase ENERGY STAR-qualified or FEMP-designated products in all product categories covered by these programs and in any acquisition

  13. Covered Product Category: Industrial Luminaires (High/Low Bay) | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Industrial Luminaires (High/Low Bay) Covered Product Category: Industrial Luminaires (High/Low Bay) The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for Industrial Luminaires (High/Low Bay). Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law. Meeting Energy Efficiency Requirements for Industrial

  14. NEXT GENERATION LUMINAIRES INDOOR JUDGING 2014 | Department of Energy

    Energy Savers [EERE]

    NEXT GENERATION LUMINAIRES INDOOR JUDGING 2014 NEXT GENERATION LUMINAIRES INDOOR JUDGING 2014 View this behind-the-scenes look at the 2014 NGL judging event where entries were evaluated by a panel of judges drawn from the architectural lighting community in an intensive three-step process that combined the judges' personal evaluations with objective measures of luminaire performance. View the text-alternative version Solid-State Lighting Home About the Solid-State Lighting Program Research &

  15. Luminaires for Advanced Lighting in Education | Department of Energy

    Energy Savers [EERE]

    Luminaires for Advanced Lighting in Education Luminaires for Advanced Lighting in Education Lead Performer: RTI International - Research Triangle Park, NC Partners: Finelite, Inc. - Union City, CA DOE Total Funding: $450,000 Cost Share: $150,000 Project Term: 7/1/15 - 12/31/16 Funding Opportunity: SSL R&D Funding Opportunity Announcement (FOA) (DE-FOA-0001171) Project Objective This project will develop and demonstrate the advantages of the novel luminaire designs that comprise the

  16. Demonstration Assessment of Light Emitting Diode (LED) Street Lighting, Phase III Continuation

    SciTech Connect (OSTI)

    Cook, Tyson; Shackelford, Jordan; Johnson, Megan; Pang, Terrance

    2008-11-01

    This report summarizes the third phase of an LED street lighting assessment project in Oakland, California, conducted to study the applicability of LED luminaires in a street lighting application.

  17. System Reliability Model for Solid-State Lighting Luminaires...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Project Impact The primary objectives of the proposed work will be to develop and validate ... for predicting the lifetime of integrated solid-state lighting (SSL) luminaires. ...

  18. LED system performance in a trial installation - one year later: Yuma border patrol, Yuma, Arizona

    SciTech Connect (OSTI)

    Wilkerson, Andrea M.; Davis, Robert G.

    2015-04-01

    The Yuma Sector Border Patrol Area is a high temperature and high solar radiation environment, providing an opportunity for the U.S. Department of Energy (DOE) to study thermal effects on outdoor light-emitting diode (LED) luminaires outside of the testing laboratory. Six LED luminaires were installed on three poles on the U.S.- Mexico border in February 2014 as part of a trial installation, which was detailed in a prior GATEWAY report.1 The initial trial installation was intended as a short - term test of six luminaires installed on three poles before proceeding with the complete installation of over 400 luminaires. Unexpected delays in the full installation have prevented the detailed evaluations initially planned, but the six installed LED luminaires continue to be monitored, and over the past year illuminance measurements were recorded initially in February 2014 and again in September 2014 at about 2500 hours of operation and in March 2015 at about 5000 hours of operation.

  19. Secretary Moniz Applauds Detroit's LED Street Lighting Upgrades |

    Energy Savers [EERE]

    Department of Energy Secretary Moniz Applauds Detroit's LED Street Lighting Upgrades Secretary Moniz Applauds Detroit's LED Street Lighting Upgrades June 16, 2014 - 10:46am Addthis Secretary of Energy Ernest Moniz visited Detroit on May 22, 2014, to mark the city's progress installing energy-efficient LED streetlights in an update of its largely broken public lighting system, speaking at the Detroit Area Pre-College Engineering Program. Like so many cities across the country, Detroit is

  20. Bayesian probabilistic model for life prediction and fault mode classification of solid state luminaires

    SciTech Connect (OSTI)

    Lall, Pradeep [Auburn Univ., Auburn, AL (United States); Wei, Junchao [Auburn Univ., Auburn, AL (United States); Sakalaukus, Peter [Auburn Univ., Auburn, AL (United States)

    2014-06-22

    A new method has been developed for assessment of the onset of degradation in solid state luminaires to classify failure mechanisms by using metrics beyond lumen degradation that are currently used for identification of failure. Luminous Flux output, Correlated Color Temperature Data on Philips LED Lamps has been gathered under 85C/85%RH till lamp failure. Failure modes of the test population of the lamps have been studied to understand the failure mechanisms in 85C/85%RH accelerated test. Results indicate that the dominant failure mechanism is the discoloration of the LED encapsulant inside the lamps which is the likely cause for the luminous flux degradation and the color shift. The acquired data has been used in conjunction with Bayesian Probabilistic Models to identify luminaires with onset of degradation much prior to failure through identification of decision boundaries between lamps with accrued damage and lamps beyond the failure threshold in the feature space. In addition luminaires with different failure modes have been classified separately from healthy pristine luminaires. The ?-? plots have been used to evaluate the robustness of the proposed methodology. Results show that the predicted degradation for the lamps tracks the true degradation observed during 85C/85%RH during accelerated life test fairly closely within the 20% confidence bounds. Correlation of model prediction with experimental results indicates that the presented methodology allows the early identification of the onset of failure much prior to development of complete failure distributions and can be used for assessing the damage state of SSLs in fairly large deployments. It is expected that, the new prediction technique will allow the development of failure distributions without testing till L70 life for the manifestation of failure.

  1. Demonstration Assessment of LED Roadway Lighting: Philadelphia, PA

    SciTech Connect (OSTI)

    Royer, Michael P.; Tuenge, Jason R.; Poplawski, Michael E.

    2012-09-01

    For this demonstration assessment, 10 different groups of LED luminaires were installed at three sites in Philadelphia, PA. Each of the three sites represented a different set of conditions, most importantly with regard to the incumbent HPS luminaires, which were nominally 100 W, 150 W, and 250 W. The performance of each product was evaluated based on manufacturer data, illuminance calculations, field measurements of illuminance, and the subjective impressions of both regular and expert observers.

  2. Print-based Manufacturing of Integrated, Low Cost, High Performance SSL Luminaires

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Print-based Manufacturing of Integrated, Low Cost, High Performance SSL Luminaires 2015 Building Technologies Office Peer Review Sridhar R. Nimma, sridharrnimma@eaton.com EATON Corporation Project Summary Timeline: Start date: 9/15/2013 Planned end date: 12/31/2015 Key Milestones 1. Increase LED Fixture Lifetime; 6/15/2014 2. Decrease cost of LED Fixture; 12/15/2015 Budget: * Budget: $4,937,345 / 50% Cost Share * Budget Period 1 complete Budget period DOE Eaton 1 $ 1,072,691 $ 1,072,690 2 $

  3. Municipal Consortium LED Street Lighting Workshop Presentations and

    Energy Savers [EERE]

    Materials-Dallas, TX | Department of Energy Dallas, TX Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Dallas, TX This page provides links to the presentations given at the DOE Municipal Solid-State Street Lighting Consortium Workshop held in Dallas March 15-16, 2012. Presentations and Materials Workshop Agenda ONCOR LED Streetlight Pilot & Technical Evaluation Update Michael Navarro, ONCOR Reading, Understanding, and Applying the LM-80 Standard Chad

  4. LED Lighting in a Performing Arts Building

    SciTech Connect (OSTI)

    Miller, N. J.; Kaye, S. M.; Coleman, P. M.; Wilkerson, A. M.; Perrin, T. E.; Sullivan, G. P.

    2014-07-31

    At the University of Florida in Gainesville, the DOE Solid-State Lighting GATEWAY program evaluated LED architectural and theatrical lighting in four academic/performance-related spaces within the Nadine McGuire Theatre + Dance Pavilion. Due to a wise choice of products and luminaire light distributions, the change brought significant quality improvements including improved controllability and color.

  5. TEXT-ALTERNATIVE VERSION: NEXT GENERATION LUMINAIRES INDOOR JUDGING 2014

    Broader source: Energy.gov [DOE]

    Dan Blitzer, NGL Steering Committee, The Practical Lighting Workshop: Products that have been evaluated by the Next Generation Luminaires Design Competition have been vetted to a degree that no...

  6. Next Generation Luminaires Design Competition Announces 2013 Outdoor Winners

    Broader source: Energy.gov [DOE]

    The 2013 winners in the outdoor category of the Next Generation Luminaires Solid-State Lighting Design Competition were announced at the Strategies in Light conference in Santa Clara, CA.

  7. Next Generation Luminaires Design Competition Announces 2015 Winners

    Broader source: Energy.gov [DOE]

    Winners in the Indoor and Outdoor categories of the seventh annual Next Generation LuminairesTM Design Competition were announced today at LIGHTFAIR® International in New York. Sponsored by DOE,...

  8. EECBG Success Story: Solar LED Light Pilot Project Illuminates the Way in Alabama

    Broader source: Energy.gov [DOE]

    A strip of new solar-powered LED streetlights in Boaz, Alabama were installed with grant funds from the Alabama Department of Economic and Community Affairs and $221,900 from the Energy Department through the Energy Efficiency and Conservation Block Grant (EECBG) program. Learn more.

  9. System Reliability Model for Solid-State Lighting Luminaires | Department

    Energy Savers [EERE]

    of Energy System Reliability Model for Solid-State Lighting Luminaires System Reliability Model for Solid-State Lighting Luminaires Lead Performer: RTI International - Research Triangle Park, NC Partners: Auburn University - Auburn, AL DOE Total Funding: $2,848,942 Cost Share: $712,234 Project Term: 9/16/2011 - 9/30/2016 Funding Opportunity: Solid State Lighting Core Technology Funding Opportunity Announcement (DE-FOA- 0000329) Project Objective The primary objectives of the proposed work

  10. Demonstration Assessment of LED Roadway Lighting: NE Cully Boulevard Portland, OR

    SciTech Connect (OSTI)

    Royer, Michael P.; Poplawski, Michael E.; Tuenge, Jason R.

    2012-06-29

    A new roadway lighting demonstration project was initiated in late 2010, which was planned in conjunction with other upgrades to NE Cully Boulevard, a residential collector road in the northeast area of Portland, OR. With the NE Cully Boulevard project, the Portland Bureau of Transportation hoped to demonstrate different light source technologies and different luminaires side-by-side. This report documents the initial performance of six different newly installed luminaires, including three LED products, one induction product, one ceramic metal halide product, and one high-pressure sodium (HPS) product that represented the baseline solution. It includes reported, calculated, and measured performance; evaluates the economic feasibility of each of the alternative luminaires; and documents user feedback collected from a group of local Illuminating Engineering Society (IES) members that toured the site. This report does not contain any long-term performance evaluations or laboratory measurements of luminaire performance. Although not all of the installed products performed equally, the alternative luminaires generally offered higher efficacy, more appropriate luminous intensity distributions, and favorable color quality when compared to the baseline HPS luminaire. However, some products did not provide sufficient illumination to all areas—vehicular drive lanes, bicycle lanes, and sidewalks—or would likely fail to meet design criteria over the life of the installation due to expected depreciation in lumen output. While the overall performance of the alternative luminaires was generally better than the baseline HPS luminaire, cost remains a significant barrier to widespread adoption. Based on the cost of the small quantity of luminaires purchased for this demonstration, the shortest calculated payback period for one of the alternative luminaire types was 17.3 years. The luminaire prices were notably higher than typical prices for currently available luminaires purchased in larger quantities. At prices that are more typical, the payback would be less than 10 years. In addition to the demonstration luminaires, a networked control system was installed for additional evaluation and demonstration purposes. The capability of control system to measure luminaire input power was explored in this study. A more exhaustive demonstration and evaluation of the control system will be the subject of future GATEWAY report(s).

  11. UNDERSTANDING LED COLOR-TUNABLE PRODUCTS | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    UNDERSTANDING LED COLOR-TUNABLE PRODUCTS UNDERSTANDING LED COLOR-TUNABLE PRODUCTS LED luminaires with the ability to deliver varying light color have been on the architectural lighting market since the early days of LED lighting, but improved efficacy, colors, controls, and capabilities have brought them greater acclaim and expanded the range of potential applications. There are three basic categories of color-tunable products: Dim-to-warm These products, also referred to as warm dim, blackbody

  12. REA Refrigerated Display Case LED Lighting Performance Specification |

    Energy Savers [EERE]

    Department of Energy REA Refrigerated Display Case LED Lighting Performance Specification REA Refrigerated Display Case LED Lighting Performance Specification A Retailer Energy Alliances (REA) Project PDF icon rea_refrig_display_spec.pdf More Documents & Publications CBEA LED Site Lighting Specification - Version 1.3, Released 2/15/2012 Model Specification for LED Roadway Luminaires, V2.0 CBEA High-Efficiency Parking Structure Lighting Specification

  13. Demonstration of LED Street Lighting in Kansas City, MO (Technical Report)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | SciTech Connect Demonstration of LED Street Lighting in Kansas City, MO Citation Details In-Document Search Title: Demonstration of LED Street Lighting in Kansas City, MO Nine different streetlighting products were installed on various streets in Kansas City, Missouri during February, 2011, to evaluate their performance relative to the incumbent high-pressure sodium (HPS) lighting. The applications investigated included 100 W, 150 W, 250 W, and 400 W HPS installations. Initial measurements

  14. Covered Product Category: Industrial Luminaires (High/Low Bay)

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for Industrial Luminaires (High/Low Bay). Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  15. DOE Publishes Report on Accelerated Life Testing of SSL Luminaires

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) has published the findings of a new study utilizing a highly accelerated life-test method (called the "hammer test") intended to produce failures in SSL luminaires in a reasonable test period, with the goal

  16. CALiPER Application Summary Report 15. LED Floodlights

    SciTech Connect (OSTI)

    none,

    2012-05-01

    This report analyzes the independently tested performance of 10 LED floodlights purchased between August and December 2011. The group included a wide range of products, both physically and in performance characteristics, which mirrors the nearly indefinite range of conventional luminaires designated as floodlights.

  17. LEDs for Interior Office Applications Webcast | Department of Energy

    Energy Savers [EERE]

    LEDs for Interior Office Applications Webcast LEDs for Interior Office Applications Webcast In this March 18, 2010 webcast, Jason Tuenge and Michael Myer of Pacific Northwest National Laboratory described the performance and economic considerations of replacing either 4' T8 lamps or entire troffer-type luminaires with LED products. The webcast also compared manufacturer performance claims about these types of products against test results from DOE's CALiPER program. View presentation slides (PDF

  18. TESTING LED COLOR-TUNABLE PRODUCTS | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TESTING LED COLOR-TUNABLE PRODUCTS TESTING LED COLOR-TUNABLE PRODUCTS Cover of CALiPER Report 23. New product capabilities and performance variables require new test methods to be developed, which is important for industry because accurate, repeatable, standardized test methods enable accurate comparisons. Measuring and reporting performance of LED color-tunable luminaires poses a new challenge, since the range of possibilities is near limitless. With variable spectral power distribution (i.e.,

  19. Demonstration Assessment of Light-Emitting Diode (LED) Post-Top Lighting at

    Office of Scientific and Technical Information (OSTI)

    Central Park in New York City (Technical Report) | SciTech Connect (LED) Post-Top Lighting at Central Park in New York City Citation Details In-Document Search Title: Demonstration Assessment of Light-Emitting Diode (LED) Post-Top Lighting at Central Park in New York City A review of five post-top light-emitting diode (LED) pedestrian luminaires installed in New York City's Central Park for possible replacement to the existing metal halide post-top luminaire. This report reviews the energy

  20. Low-Cost Light-Emitting Diode Luminaire for General Illumination...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low-Cost Light-Emitting Diode Luminaire for General Illumination Presenter: Paul Fini, CREE Santa Barbara Technology Center This project is demonstrating an efficient...

  1. Text-Alternative Version: SSL Luminaire Performance in the Lab: Just How Well Do They Perform?

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the SSL Luminaire Performance in the Lab: Just How Well Do They Perform webcast.

  2. Evaluation of Metal Halide, Plasma, and LED Lighting Technologies for a Hydrogen Fuel Cell Mobile Light (H 2 LT)

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Miller, L. B.; Donohoe, S. P.; Jones, M. H.; White, W. A.; Klebanoff, L. E.; Velinsky, S. A.

    2015-04-22

    This article reports on the testing and comparison of a prototype hydrogen fuel cell light tower (H2LT) and a conventional diesel-powered metal halide light trailer for use in road maintenance and construction activities. The prototype was originally outfitted with plasma lights and then with light-emitting diode (LED) luminaires. Light output and distribution, lighting energy efficiency (i.e., efficacy), power source thermal efficiency, and fuel costs are compared. The metal halide luminaires have 2.2 and 3.1 times more light output than the plasma and LED luminaires, respectively, but they require more power/lumen to provide that output. The LED luminaires have 1.6 timesmore » better light efficacy than either the metal halide or plasma luminaires. The light uniformity ratios produced by the plasma and LED towers are acceptable. The fuel cell thermal efficiency at the power required to operate the plasma lights is 48%, significantly higher than the diesel generator efficiency of 23% when operating the metal halide lights. Due to the increased efficiency of the fuel cell and the LED lighting, the fuel cost per lumen-hour of the H2LT is 62% of the metal halide diesel light tower assuming a kilogram of hydrogen is twice the cost of a gallon of diesel fuel.« less

  3. Technical Feasibility Assessment of LED Roadway Lighting on the Golden Gate Bridge

    SciTech Connect (OSTI)

    Tuenge, Jason R.

    2012-09-01

    Subsequent to preliminary investigations by the Golden Gate Bridge Highway & Transportation District (GGB), in coordination with Pacific Gas & Electric (PG&E), the GATEWAY Demonstration program was asked to evaluate the technical feasibility of replacing existing roadway lighting on the bridge with products utilizing LED technology. GGB and PG&E also indicated interest in induction (i.e., electrodeless fluorescent) technology, since both light source types feature rated lifetimes significantly exceeding those of the existing high-pressure sodium (HPS) and low-pressure sodium (LPS) products. The goal of the study was to identify any solutions which would reduce energy use and maintenance without compromising the quantity or quality of existing illumination. Products used for roadway lighting on the historic bridge must be installed within the existing amber-lensed shoebox-style luminaire housings. It was determined that induction technology does not appear to represent a viable alternative for the roadway luminaires in this application; any energy savings would be attributable to a reduction in light levels. Although no suitable LED retrofit kits were identified for installation within existing luminaire housings, several complete LED luminaires were found to offer energy savings of 6-18%, suggesting custom LED retrofit kits could be developed to match or exceed the performance of the existing shoeboxes. Luminaires utilizing ceramic metal halide (CMH) were also evaluated, and some were found to offer 28% energy savings, but these products might actually increase maintenance due to the shorter rated lamp life. Plasma technology was evaluated, as well, but no suitable products were identified. Analysis provided in this report was completed in May 2012. Although LED technologies are expected to become increasingly viable over time, and product mock-ups may reveal near-term solutions, some options not currently considered by GGB may ultimately merit evaluation. For example, it would be preferable in terms of performance to simply replace existing luminaires (some of which may already be nearing end of life) with fully-integrated LED or CMH luminaires rather than replacing internal components. Among other benefits, this would allow reputable manufacturers to offer standard warranties for their products. Similarly, the amber lenses might be reformulated such that they do not render white light sources in a greenish cast, thereby allowing the use of off-the-shelf LED or CMH products. Last, it should be noted that the existing amber-lensed shoeboxes bear no daytime resemblance to the LPS luminaires originally used to light the roadway.

  4. WhiteOptics' Low-Cost Reflector Composite Boosts LED Fixture Efficiency

    Broader source: Energy.gov [DOE]

    With the help of DOE funding, WhiteOptics has developed a composite coating that can be used to improve efficiency in backlit, indirect, and cavity-mixing LED luminaire designs by maximizing light reflection and output. The highly diffuse coating, which is based on a novel high-reflectance particle technology, allows for uniform distribution of light without exaggerating the point-source nature of the LEDs, and is intended to offer an overall system cost-improving solution for LED optics.

  5. Evaluation of Metal Halide, Plasma, and LED Lighting Technologies for a Hydrogen Fuel Cell Mobile Light (H 2 LT)

    SciTech Connect (OSTI)

    Miller, L. B.; Donohoe, S. P.; Jones, M. H.; White, W. A.; Klebanoff, L. E.; Velinsky, S. A.

    2015-04-22

    This article reports on the testing and comparison of a prototype hydrogen fuel cell light tower (H2LT) and a conventional diesel-powered metal halide light trailer for use in road maintenance and construction activities. The prototype was originally outfitted with plasma lights and then with light-emitting diode (LED) luminaires. Light output and distribution, lighting energy efficiency (i.e., efficacy), power source thermal efficiency, and fuel costs are compared. The metal halide luminaires have 2.2 and 3.1 times more light output than the plasma and LED luminaires, respectively, but they require more power/lumen to provide that output. The LED luminaires have 1.6 times better light efficacy than either the metal halide or plasma luminaires. The light uniformity ratios produced by the plasma and LED towers are acceptable. The fuel cell thermal efficiency at the power required to operate the plasma lights is 48%, significantly higher than the diesel generator efficiency of 23% when operating the metal halide lights. Due to the increased efficiency of the fuel cell and the LED lighting, the fuel cost per lumen-hour of the H2LT is 62% of the metal halide diesel light tower assuming a kilogram of hydrogen is twice the cost of a gallon of diesel fuel.

  6. EECBG Success Story: Shining Energy-Saving LEDs on Utah Starry...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    About 2,500 streetlights will be replaced and could save the town 20% to 50% on electricity bills. Learn more. Addthis Related Articles A worker installs energy-saving streetlights ...

  7. LED Chips and Packaging for 120 LPW SSL Component

    SciTech Connect (OSTI)

    Ibbetson, James

    2009-12-28

    Cree has developed a new, high-efficiency, low-cost, light emitting diode (LED) lamp module that should be capable of replacing standard, halogen, fluorescent and metal halide lamps based on the total cost of ownership. White LEDs are produced by combining one or more saturated color LEDs with a phosphor or other light down-converting media to achieve white broad-band illumination. This two year project addressed LED chip and package efficiency improvements to establish a technology platform suitable for low-cost, high-efficiency commercial luminaires. Novel photonic-crystal LEDs were developed to improve the light extraction efficiency of blue GaN-based LEDs compared to the baseline technology. Improved packaging designs that reduced down-conversion and absorption related light losses, led to a higher overall LED efficiency. Specifically, blue LEDs were demonstrated with light output nearing 600 mW and an external quantum efficiency greater than 60 percent (using 1 mm2 chips at an operating current of 350 mA). The results were achieved using a novel, production capable photonic-crystal LED fabrication process. These LEDs formed the basis for a multi-chip white lamp module prototype, which provided 510 lumens light output at a correlated color temperature (CCT) of 3875 K and an operating current of 350 mA per 1mm2 chip. The overall conversion efficiency at 4100 K improved to ~ 65%. The resulting efficacy is 112 lumens per watt (LPW) a 33% improvement over the start of the project. In addition, a proof-of-concept luminaire was demonstrated that provided a flux of 1700 lumens at a 3842 K CCT.

  8. LED Lightbulbs

    Broader source: Energy.gov [DOE]

    All of these lightbulbs meet the new energy standards that take effect from 20122014. These LED bulbs use about 75%80% less energy than traditional bulbs.

  9. New GATEWAY Report Monitors LED System Performance in a High-Temperature

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Environment | Department of Energy GATEWAY Report Monitors LED System Performance in a High-Temperature Environment New GATEWAY Report Monitors LED System Performance in a High-Temperature Environment May 11, 2015 - 4:31pm Addthis The U.S. Department of Energy has released a follow-up GATEWAY report on LED system performance at the Yuma (Arizona) Sector Border Patrol Area. Six LED luminaires - installed on three poles as part of a trial installation detailed in a prior GATEWAY report -

  10. LED Update

    SciTech Connect (OSTI)

    Johnson, Mark L.; Gordon, Kelly L.

    2006-09-01

    This article, which will appear in RESIDENTIAL LIGHTING MAGAZINE, interviews PNNL's Kelly Gordon and presents the interview in question and answer format. The topic is a light emitting diode (LED) lighting also known as solid state lighting. Solid state lighting will be a new category in an energy efficient lighting fixture design competition called Lighting for Tomorrow sponsored by the US Department of Energy Emerging Technologies Office, the American Institute for Lighting, and the Consortium for Energy Efficiency. LED technology has been around since the ’60s, but it has been used mostly for indicator lights on electronics equipment. The big breakthrough was the development in the 1990s of blue LEDs which can be combined with the red and green LEDs that already existed to make white light. LEDs produce 25 to 40 lumens of light per watt of energy used, almost as much as a CFL (50 lumens per watt) and much more efficient than incandescent sources, which are around 15 lumens per watt. They are much longer lived and practical in harsh environments unsuitable for incandescent lighting. They are ready for niche applications now, like under-counter lighting and may be practical for additional applications as technological challenges are worked out and the technology is advancing in leaps and bounds.

  11. LED lamp

    SciTech Connect (OSTI)

    Galvez, Miguel; Grossman, Kenneth; Betts, David

    2013-11-12

    There is herein described a lamp for providing white light comprising a plurality of light sources positioned on a substrate. Each of said light sources comprises a blue light emitting diode (LED) and a dome that substantially covers said LED. A first portion of said blue light from said LEDs is transmitted through said domes and a second portion of said blue light is converted into a red light by a first phosphor contained in said domes. A cover is disposed over all of said light sources that transmits at least a portion of said red and blue light emitted by said light sources. The cover contains a second phosphor that emits a yellow light in response to said blue light. The red, blue and yellow light combining to form the white light and the white light having a color rendering index (CRI) of at least about 80.

  12. Demonstration Assessment of Light Emitting Diode (LED) Commercial Garage Lights In the Providence Portland Medical Center, Portland, Oregon

    SciTech Connect (OSTI)

    Ton, My K.; Richman, Eric E.; Gilbride, Theresa L.

    2008-11-11

    This U.S. Department of Energy GATEWAY Demonstration project studied the applicability of light-emitting diode (LED) luminaires for commercial parking garage applications. High-pressure sodium (HPS) area luminaires were replaced with new LED area luminaires. The project was supported under the U.S. Department of Energy (DOE) Solid State Lighting Program. Other participants in the demonstration project included Providence Portland Medical Center in Portland, Oregon, the Energy Trust of Oregon, and Lighting Sciences Group (LSG) Inc. Pacific Northwest National Laboratory (PNNL) conducted the measurements and analysis of the results. PNNL manages GATEWAY demonstrations for DOE and represents their perspective in the conduct of the work. Quantitative and qualitative measurements of light and electrical power were taken at the site for both HPS and LED light sources. Economic costs were estimated and garage users’ responses to the new light sources were gauged with a survey. Six LED luminaires were installed in the below-ground parking level A, replacing six existing 150W HPS lamps spread out over two rows of parking spaces. Illuminance measurements were taken at floor level approximately every 4 ft on a 60-ft x 40-ft grid to measure light output of these LED luminaires which were termed the “Version 1” luminaires. PNNL conducted power measurements of the circuit in the garage to which the 6 luminaires were connected and determined that they drew an average of 82 W per lamp. An improved LED luminaire, Version 2, was installed in Level B of the parking garage. Illuminance measurements were not made of this second luminaire on site due to higher traffic conditions, but photometric measurements of this lamp and Version 1 were made in an independent testing laboratory and power usage for Version 2 was also measured. Version 1 was found to produce 3600 lumens and Version 2 was found to produce 4700 lumens of light and to consume 78 Watts. Maximum and minimum light levels were measured for the HPS and LED Version 1 luminaires and projected for the Version 2 luminaires. Maximum light levels were 23.51 foot candles, 20.54 fc, and 26.7 fc respectively and minimum light levels were 1.49 fc, 1.45 fc, and 1.88 fc. These results indicate very similar or even slightly higher light levels produced by the LED lamps, despite the higher lumen output of the HPS lamp. The LED lamps provide higher luminaire efficacy because all of the light is directed down and out. None of it is “lost” in the fixture. Also the HPS luminaire had poorly designed optics and a plastic covering that tended to get dirty and cracked, further decreasing the realized light output.[is this an accurate way to say this?] Consumer perceptions of the Version 2 LED were collected via a written survey form given to maintenance and security personnel. More than half felt the LED luminaires provided more light than the HPS lamps and a majority expressed a preference for the new lamps when viewing the relamped area through a security camera. Respondents commented that the LED luminaires were less glary, created less shadows, had a positive impact on visibility, and improved the overall appearance of the area. PNNL conducted an economic analysis and found that the Version 1 lamp produced annual energy savings of 955 kWh and energy cost savings of $76.39 per lamp at electricity rates of 6.5 cents per kWh and $105.03 at 11 cents per kWh. PNNL found that the Version 2 lamp produced annual energy savings of 991 kWh and energy cost savings of $79.26 per lamp at electricity rates of 6.5 cents per kWh and $108.98 at 11 cents per kWh. PNNL also calculated simple payback and found that Version 1 showed paybacks of 5.4 yrs at 6.5c/kWh and 4.1 yrs at 11c/kWh while Version 2 showed paybacks of 5.2 yrs at 6.5c/kWh and 3.9 yrs at 11c/kWh.

  13. CONTROLLING LED COLOR-TUNABLE PRODUCTS

    Broader source: Energy.gov [DOE]

    Controlling color-tunable luminaires can be challenging for specifiers, since different manufacturers use different approaches. Some manufacturers provide proprietary control devices, which often...

  14. DOE Publishes Report on Accelerated Life Testing of SSL Luminaires...

    Broader source: Energy.gov (indexed) [DOE]

    of which were attributed to solder-joint fatigue, and the other two to board-level corrosion. The findings reinforce the belief that LEDs in lighting systems are highly...

  15. Demonstration Assessment of Light-Emitting Diode (LED) Post-Top Lighting at

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Central Park in New York City (Technical Report) | SciTech Connect Demonstration Assessment of Light-Emitting Diode (LED) Post-Top Lighting at Central Park in New York City Citation Details In-Document Search Title: Demonstration Assessment of Light-Emitting Diode (LED) Post-Top Lighting at Central Park in New York City A review of five post-top light-emitting diode (LED) pedestrian luminaires installed in New York City's Central Park for possible replacement to the existing metal halide

  16. Materials and Designs for High-Efficacy LED Light Engines | Department of

    Energy Savers [EERE]

    Energy and Designs for High-Efficacy LED Light Engines Materials and Designs for High-Efficacy LED Light Engines Lead Performer: Cree, Inc. - Durham, NC DOE Total Funding: $1,499,971 Cost Share: $374,993 Project Term: 7/1/15 - 6/30/17 Funding Opportunity: SSL R&D Funding Opportunity Announcement (FOA) (DE-FOA-0001171) Project Objective This project will focus on developing high-efficacy, cost-effective LED light engines for next-generation luminaires. The goal is to incorporate novel

  17. CALiPER Report 21.2. Linear (T8) LED Lamp Performance in Five Types of Recessed Troffers

    SciTech Connect (OSTI)

    2014-05-01

    Although lensed troffers are numerous, there are many other types of optical systems as well. This report looks at the performance of three linear (T8) LED lamps—chosen primarily based on their luminous intensity distributions (narrow, medium, and wide beam angles)—as well as a benchmark fluorescent lamp in five different troffer types. Also included are the results of a subjective evaluation. Results show that linear (T8) LED lamps can improve luminaire efficiency in K12-lensed and parabolic-louvered troffers, effect little change in volumetric and high-performance diffuse-lensed type luminaires, but reduce efficiency in recessed indirect troffers. These changes can be accompanied by visual appearance and visual comfort consequences, especially when LED lamps with clear lenses and narrow distributions are installed. Linear (T8) LED lamps with diffuse apertures exhibited wider beam angles, performed more similarly to fluorescent lamps, and received better ratings from observers. Guidance is provided on which luminaires are the best candidates for retrofitting with linear (T8) LED lamps.

  18. UDC Teaming with Acuity to Make Commercial-Sector PHOLED Luminaire

    Broader source: Energy.gov [DOE]

    With support from DOE's Small Business Innovation Research program, Universal Display Corporation (UDC) is working with Acuity Brands Lighting to make an efficient, color-tunable luminaire for use in the commercial sector using UDC's proprietary phosphorescent OLED (PHOLED™) technology. The present project aims to adapt this technology—which increases the energy efficiency of OLEDs by as much as fourfold—to high-end commercial and institutional building applications.

  19. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    Demonstration of LED Street Lighting in Kansas City MO Kinzey Bruce R Royer Michael P Hadjian M Kauffman Rick LED streetlighting field illuminance measurement LED streetlighting...

  20. New Rules Help Pocahontas Brighten Streets | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    The City of Pocahontas, Iowa swill replace sodium streetlights with LED fixtures. | File photo The City of Pocahontas, Iowa swill replace sodium streetlights with LED fixtures. |...

  1. DOE CALiPER Program, Report 21.2: Linear (T8) LED Lamp Performance in Five Types of Recessed Troffers

    SciTech Connect (OSTI)

    Miller, Naomi J.; Perrin, Tess E.; Royer, Michael P.; Wilkerson, Andrea M.; Beeson, Tracy A.

    2014-05-20

    Although lensed troffers are numerous, there are many other types of optical systems as well. This report looked at the performance of three linear (T8) LED lamps chosen primarily based on their luminous intensity distributions (narrow, medium, and wide beam angles) as well as a benchmark fluorescent lamp in five different troffer types. Also included are the results of a subjective evaluation. Results show that linear (T8) LED lamps can improve luminaire efficiency in K12-lensed and parabolic-louvered troffers, effect little change in volumetric and high-performance diffuse-lensed type luminaires, but reduce efficiency in recessed indirect troffers. These changes can be accompanied by visual appearance and visual comfort consequences, especially when LED lamps with clear lenses and narrow distributions are installed. Linear (T8) LED lamps with diffuse apertures exhibited wider beam angles, performed more similarly to fluorescent lamps, and received better ratings from observers. Guidance is provided on which luminaires are the best candidates for retrofitting with linear (T8) LED lamps.

  2. Solution-Procesed Small-Molecule OLED Luminaire for Interior Illumination

    SciTech Connect (OSTI)

    Parker, Ian

    2012-02-29

    Prototype lighting panels and luminaires were fabricated using DuPont Displays?? solution-processed small-molecule OLED technology. These lighting panels were based on a spatially-patterned, 3-color design, similar in concept to an OLED display panel, with materials chosen to maximize device efficacy. The majority of the processing steps take place in air (rather than high vacuum). Optimization of device architecture, processing and construction was undertaken, with a final prototype design of 50 cm{sup 2} being fabricated and tested. Performance of these panels reached 35 lm/W at illuminant-A. A unique feature of this technology is the ability to color tune the emission, and color temperatures ranging from 2700 to > 6,500K were attained in the final build. Significant attention was paid to low-cost fabrication techniques.

  3. Demonstration Assessment of Light Emitting Diode (LED) Walkway Lighting at the Federal Aviation Administration William J. Hughes Technical Center, in Atlantic City, New Jersey

    SciTech Connect (OSTI)

    Kinzey, Bruce R.; Myer, Michael

    2008-03-18

    This report documents the results of a collaborative project to demonstrate a solid state lighting (SSL) general illumination product in an outdoor area walkway application. In the project, six light-emitting diode (LED) luminaires were installed to replace six existing high pressure sodium (HPS) luminaires mounted on 14-foot poles on a set of exterior walkways and stairs at the Federal Aviation Administration (FAA) William J. Hughes Technical Center in Atlantic City, New Jersey, during December, 2007. The effort was a U.S. Department of Energy (DOE) SSL Technology Gateway Demonstration that involved a collaborative teaming agreement between DOE, FAA and Ruud Lighting (and their wholly owned division, Beta LED). Pre- and post-installation power and illumination measurements were taken and used in calculations of energy savings and related economic payback, while personnel impacted by the new lights were provided questionnaires to gauge their perceptions and feedback. The SSL product demonstrated energy savings of over 25% while maintaining illuminance levels and improving illuminance uniformity. PNNL's economic analysis yielded a variety of potential payback results depending on the assumptions used. In the best case, replacing HPS with the LED luminaire can yield a payback as low as 3 years. The new lamps were quite popular with the affected personnel, who gave the lighting an average score of 4.46 out of 5 for improvement.

  4. LED Frequently Asked Questions

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    as a general light source. As more LED lighting products are introduced on the market, ... Are LEDs ready for general lighting? The number of white-light LED products available on ...

  5. LED Lightbulbs | Department of Energy

    Energy Savers [EERE]

    File LED lightbulbs - EPS file.

  6. LED Color Characteristics

    SciTech Connect (OSTI)

    2012-01-01

    Color quality is an important consideration when evaluating LED-based products for general illumination. This fact sheet reviews the basics regarding light and color and summarizes the most important color issues related to white-light LED systems.

  7. Cree LED Lighting Solutions Formerly LED Lighting Fixtures LLF...

    Open Energy Info (EERE)

    LED Lighting Solutions Formerly LED Lighting Fixtures LLF Jump to: navigation, search Name: Cree LED Lighting Solutions (Formerly LED Lighting Fixtures (LLF)) Place: Morrisville,...

  8. Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting at the I-35W Bridge, Minneapolis, MN

    SciTech Connect (OSTI)

    Kinzey, Bruce R.; Myer, Michael

    2009-08-31

    This report describes the process and results of a demonstration of solid-state lighting (SSL) technology conducted in 2009 at the recently reconstructed I-35W bridge in Minneapolis, MN. The project was supported under the U.S. Department of Energy (DOE) Solid-State Lighting GATEWAY Technology Demonstration Program. Other participants in the demonstration project included the Minnesota Department of Transportation (Mn/DOT), Federal Highways Administration (FHWA), and BetaLED™ (a division of Ruud Lighting). Pacific Northwest National Laboratory (PNNL) conducted the measurements and analysis of the results. DOE has implemented a three-year evaluation of the LED luminaires in this installation in order to develop new longitudinal field data on LED performance in a challenging, real-world environment. This document provides information through the initial phase of the I-35W bridge project, up to and including the opening of the bridge to the public and the initial feedback received on the LED lighting installation from bridge users. Initial findings of the evaluation are favorable, with minimum energy savings level of 13% for the LED installation relative to the simulated base case using 250W high-pressure sodium (HPS) fixtures. The LEDs had an average illuminance level of 0.91 foot candles compared to 1.29 fc for the HPS lamps. The LED luminaires cost $38,000 more than HPS lamps, yielding a lengthy payback period, however the bridge contractor had offered to include the LED luminaires as part of the construction package at no additional cost. One potentially significant benefit of the LEDs in this installation is avoiding rolling lane closures on the heavily-traveled interstate bridge for the purpose of relamping the HPS fixtures. Rolling lane closures involve multiple crew members and various maintenance and safety vehicles, diversion of traffic, as well as related administrative tasks (e.g., approvals, scheduling, etc.). Mn/DOT records show an average cost of relamping fixtures along interstate roadways of between $130-150 per pole. The previous bridge saw a lamp mortality rate of approximately 50% every two years, though the new bridge was designed to minimize many of the vibration issues. A voluntary Web-based feedback survey of nearly 500 self-described bridge users showed strong preference for the LED lighting - positive comments outnumbered negative ones by about five-to-one.

  9. Establishing LED Equivalency

    SciTech Connect (OSTI)

    2011-10-01

    Solid-state lighting program technology fact sheet that provides guidance for comparing products based on LED or other light source technologies.

  10. General Service LED Lamps

    SciTech Connect (OSTI)

    2012-04-01

    Solid-state lighting program technology fact sheet that compares general service incandescent lamps—i.e., light bulbs—to LED and CFL alternatives.

  11. Recessed LED Downlights

    SciTech Connect (OSTI)

    2012-05-01

    Solid-state lighting program technology fact sheet that briefly discusses different LED product types and their performance relative to downlights utilizing traditional lamps.

  12. LED Color Stability

    SciTech Connect (OSTI)

    2014-03-01

    DOE Solid-State Lighting program technology fact sheet that addresses key questions about color stability and color shift in LED lighting applications.

  13. LED MR16 Lamps

    SciTech Connect (OSTI)

    2012-07-01

    Solid-state lighting program technology fact sheet that describes the performance of LED MR16 lamps and discusses electronic compatibility concerns.

  14. Prediction of Lumen Output and Chromaticity Shift in LEDs Using Kalman Filter and Extended Kalman Filter Based Models

    SciTech Connect (OSTI)

    Lall, Pradeep; Wei, Junchao; Davis, J Lynn

    2014-06-24

    Abstract Solid-state lighting (SSL) luminaires containing light emitting diodes (LEDs) have the potential of seeing excessive temperatures when being transported across country or being stored in non-climate controlled warehouses. They are also being used in outdoor applications in desert environments that see little or no humidity but will experience extremely high temperatures during the day. This makes it important to increase our understanding of what effects high temperature exposure for a prolonged period of time will have on the usability and survivability of these devices. Traditional light sources burn out at end-of-life. For an incandescent bulb, the lamp life is defined by B50 life. However, the LEDs have no filament to burn. The LEDs continually degrade and the light output decreases eventually below useful levels causing failure. Presently, the TM-21 test standard is used to predict the L70 life of LEDs from LM-80 test data. Several failure mechanisms may be active in a LED at a single time causing lumen depreciation. The underlying TM-21 Model may not capture the failure physics in presence of multiple failure mechanisms. Correlation of lumen maintenance with underlying physics of degradation at system-level is needed. In this paper, Kalman Filter (KF) and Extended Kalman Filters (EKF) have been used to develop a 70-percent Lumen Maintenance Life Prediction Model for LEDs used in SSL luminaires. Ten-thousand hour LM-80 test data for various LEDs have been used for model development. System state at each future time has been computed based on the state space at preceding time step, system dynamics matrix, control vector, control matrix, measurement matrix, measured vector, process noise and measurement noise. The future state of the lumen depreciation has been estimated based on a second order Kalman Filter model and a Bayesian Framework. Life prediction of L70 life for the LEDs used in SSL luminaires from KF and EKF based models have been compared with the TM-21 model predictions and experimental data.

  15. Demonstration Assessment of Light-Emitting Diode (LED) Parking Lot Lighting in Leavenworth, KS

    SciTech Connect (OSTI)

    Myer, Michael; Kinzey, Bruce R.; Curry, Ku'uipo

    2011-05-06

    This report describes the process and results of a demonstration of solid-state lighting (SSL) technology in a commercial parking lot lighting application, under the U.S. Department of Energy (DOE) Solid-State Lighting Technology GATEWAY Demonstration Program. The parking lot is for customers and employees of a Walmart Supercenter in Leavenworth, Kansas and this installation represents the first use of the LED Parking Lot Performance Specification developed by the DOE’s Commercial Building Energy Alliance. The application is a parking lot covering more than a half million square feet, lighted primarily by light-emitting diodes (LEDs). Metal halide wall packs were installed along the building facade. This site is new construction, so the installed baseline(s) were hypothetical designs. It was acknowledged early on that deviating from Walmart’s typical design would reduce the illuminance on the site. Walmart primarily uses 1000W pulse-start metal halide (PMH) lamps. In order to provide a comparison between both typical design and a design using conventional luminaires providing a lower illuminance, a 400W PMH design was also considered. As mentioned already, the illuminance would be reduced by shifting from the PMH system to the LED system. The Illuminating Engineering Society of North America (IES) provides recommended minimum illuminance values for parking lots. All designs exceeded the recommended illuminance values in IES RP-20, some by a wider margin than others. Energy savings from installing the LED system compared to the different PMH systems varied. Compared to the 1000W PMH system, the LED system would save 63 percent of the energy. However, this corresponds to a 68 percent reduction in illuminance as well. In comparison to the 400W PMH system, the LED system would save 44 percent of the energy and provide similar minimum illuminance values at the time of relamping. The LED system cost more than either of the PMH systems when comparing initial costs. However, when the life-cycle costs from energy and maintenance were factored into the scenario, the LED system had lower costs at the end of a 10-year analysis period. The LED system had a 6.1 year payback compared to the 1000W PMH system and a 7.5 year payback versus the 400W PMH system. The costs reflect high initial cost for the LED luminaire, plus more luminaires and (subsequently) more poles for the LED system. The other major issue affecting cost effectiveness was that Leavenworth, Kansas has very low electricity costs. The melded rate for this site was $0.056 per kWh for electricity. However, if the national electricity rate of $0.1022/kWh was used the payback would change to between four and five years for the LED system. This demonstration met the GATEWAY requirements of saving energy, matching or improving illumination, and being cost effective. The project also demonstrated that the Commercial Building Energy Alliance (CBEA) specification works in practice. Walmart appreciated having an entire site lighted by LEDs to gain more experience with the technology. Walmart is reviewing the results of the demonstration as they consider their entire real estate portfolio.

  16. LED Frequently Asked Questions

    SciTech Connect (OSTI)

    2011-05-01

    Solid-state lighting program technology fact sheet that provides an overview of what retailers, energy efficiency advocates, and consumers need to know to make informed LED buying decisions.

  17. LED Directional Lamps

    SciTech Connect (OSTI)

    2012-11-01

    Solid-state lighting program technology fact sheet that provides an overview of the current performance of LED PAR-, BR-, R-, and AR-shaped lamps, which were all investigated by CALiPER in 2012.

  18. Optical Safety of LEDs

    SciTech Connect (OSTI)

    none,

    2013-06-01

    Solid-state lighting program technology fact sheet that clarifies the issue of LED lighting safety for the human eye and takes a look at current standards for photobiological safety.

  19. high-power LEDs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    high-power LEDs - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced Nuclear

  20. EATON PURSUES PRINT-BASED MANUFACTURING OF INTEGRATED, LOW-COST, HIGH-PERFORMANCE SSL LUMINAIRES

    Broader source: Energy.gov [DOE]

    With the help of DOE funding, Eaton is using manufacturing process innovation to develop a way to place the LED package, chip, or chip array directly on a fixture or heat sink in order to improve...

  1. LEDS | OpenEI Community

    Open Energy Info (EERE)

    LEDS Home Graham7781's picture Submitted by Graham7781(2017) Super contributor 16 November, 2012 - 11:23 LEDS the focus of Monday's 10 a.m. Town Hall Meeting LEDS Town Hall meeting...

  2. LED Basics | Department of Energy

    Office of Environmental Management (EM)

    SSL Basics » LED Basics LED Basics Unlike incandescent lamps, LEDs are not inherently white light sources. Instead, LEDs emit nearly monochromatic light, making them highly efficient for colored light applications such as traffic lights and exit signs. However, to be used as a general light source, white light is needed. White light can be achieved with LEDs in three ways: Phosphor conversion, in which a phosphor is used on or near the LED to convert the colored light to white light RGB

  3. Advanced Leds | Open Energy Information

    Open Energy Info (EERE)

    Place: Coventry, England, United Kingdom Zip: CV5 6SP Product: Advanced Leds develops LED technology for outdoor lighting, including street lighting applications. Coordinates:...

  4. LEd:JCD

    Office of Legacy Management (LM)

    LEd:JCD TO- 54 k-sour R3scsrck Fouadatlon 0f$..&+0is$tlstituta of TecGJlow Tecmolocy Csilter 10 Zest 35th Stmet ', c!xk3go lo, I3.Umie Atteqtion: MC. R. c. Barrall Gentlemen: Reference is wada to (a) your appUcetio0 of 3awe~ q,' 1959, rrqlacst~alirpn~tonori~200gsr;ls~hi~4~ched oranlm, (b) our a-q.4 of Z'ebmazy 6, lYS9, ke<wthg eddi- tiona1 'L+lmrQdiEp ia 'Support of your applJcatloD, (c) ycxu.r telqr3a of Eqtember 29, 1959, reque5tlng reneval of ~cense sm-49 -vc+biTt cksnga. Since'va kaem

  5. LED Lighting | Department of Energy

    Energy Savers [EERE]

    Electricity & Fuel » Lighting » LED Lighting LED Lighting LED Lighting The light-emitting diode (LED) is one of today's most energy-efficient and rapidly-developing lighting technologies. Quality LED light bulbs last longer, are more durable, and offer comparable or better light quality than other types of lighting. Check out the top 8 things you didn't know about LEDs to learn more. Energy Savings LED is a highly energy efficient lighting technology, and has the potential to fundamentally

  6. LED Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electricity & Fuel » Lighting » LED Lighting LED Lighting LED Lighting The light-emitting diode (LED) is one of today's most energy-efficient and rapidly-developing lighting technologies. Quality LED light bulbs last longer, are more durable, and offer comparable or better light quality than other types of lighting. Check out the top 8 things you didn't know about LEDs to learn more. Energy Savings LED is a highly energy efficient lighting technology, and has the potential to fundamentally

  7. Using LEDs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Using LEDs Using LEDs With their unique design and performance characteristics-such as directional light emission, compact profile, superior optical control, energy efficiency, breakage resistance, reduced maintenance, and long life-LEDs are well suited to a variety of lighting applications. LED products are most competitive in applications where these performance characteristics outweigh their first-cost disadvantages. Although LED products are finding success in a growing number of

  8. LED Lighting | Department of Energy

    Office of Environmental Management (EM)

    comparable or better light quality than other types of lighting. Check out the top 8 things you didn't know about LEDs to learn more. Energy Savings LED is a highly energy...

  9. LED Lighting Facts®

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LED Lighting Facts 2014 Building Technologies Office Peer Review Marc Ledbetter, ... retailers, distributors, lighting designers, specifiers and energy efficiency programs. ...

  10. LED Green Power Inc | Open Energy Information

    Open Energy Info (EERE)

    LED Green Power Inc Jump to: navigation, search Name: LED Green Power Inc Place: Santa Cruz, California Zip: 95060 Product: LED fixture and cartridge manufacturer. References: LED...

  11. LED Roundtable Reports | Department of Energy

    Energy Savers [EERE]

    LED Roundtable Reports LED Roundtable Reports PDF icon 2015 LED Core Technology Roundtable Report.pdf PDF icon 2015 LED Product Development and Manufacturing Roundtable Report.pdf...

  12. LED Roundtable Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LED Roundtable Reports LED Roundtable Reports PDF icon 2015 LED Core Technology Roundtable Report.pdf PDF icon 2015 LED Product Development and Manufacturing Roundtable Report.pdf ...

  13. Demonstration Assessment of Light-Emitting Diode (LED) Street Lighting Host Site: Lija Loop, Portland, Oregon

    SciTech Connect (OSTI)

    Kinzey, Bruce R.; Myer, Michael

    2009-11-01

    This report describes the process and results of a demonstration of solid-state lighting (SSL) technology in a residential street lighting application, under the U.S. Department of Energy GATEWAY Solid-State Lighting Technology Demonstration Program. In this project, eight 100W (nominal) high-pressure sodium cobra head fixtures were replaced with a like number of LED street light luminaires manufactured by Leotek, Inc. The Leotek product achieved an estimated payback in the Lija Loop installation of about 20 years for replacement scenarios and a much shorter 7.6 years for new installations. Much of the associated energy savings (55%) supporting these payback periods, however, were achieved by reducing average horizontal photopic illuminance a similar amount (53%). Examined from a different perspective, the measured performance suggests that the Leotek product is at approximate parity with the HPS cobra head in terms of average delivered photopic illumination for a given power consumption. HPS comprises the second most efficacious street lighting technology available, exceeded only by low pressure sodium (LPS). LPS technology is not considered suitable for most street lighting applications due to its monochromatic spectral output and poor color rendering ability; therefore, this LED product is performing at an efficiency level comparable to its primary competition in this application.

  14. LED Record Efficacy and Brightness

    Broader source: Energy.gov [DOE]

    Designed for general lighting applications such as street, industrial, and parking garage lighting, the Cree XLamp® power LED sets new records for LED brightness and efficacy, up to 85 lm/W at 350 mA. The XLamp utilizes Cree's performance breakthrough EZBright™ LED chip; both products include technology that was developed in part with R&D funding support from DOE.

  15. Employee-Led Safety Committees

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Employee-Led Safety Committees 5 Mentoring and Outreach * CHPRC utilizes members of ... Allocation of Resources * Recognition - Establish a recognition budget * Mentoring & ...

  16. Demonstration of LED Street Lighting

    SciTech Connect (OSTI)

    Kinzey, B. R.; Royer, M. P.; Hadjian, M.; Kauffman, R.

    2013-06-01

    GATEWAY program and Municipal Solid-State Street Lighting Consortium report on a demonstration of LED street lighting in Kansas City, MO.

  17. LED

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced Nuclear Energy Nuclear

  18. Metacapacitors for LED Lighting: Metacapacitors

    SciTech Connect (OSTI)

    2010-09-02

    ADEPT Project: The CUNY Energy Institute is developing less expensive, more efficient, smaller, and longer-lasting power converters for energy-efficient LED lights. LEDs produce light more efficiently than incandescent lights and last significantly longer than compact fluorescent bulbs, but they require more sophisticated power converter technology, which increases their cost. LEDs need more sophisticated converters because they require a different type of power (low voltage direct current, or DC) than what's generally supplied by power outlets. The CUNY Energy Institute is developing sophisticated power converters for LEDs that contain capacitors made from new, nanoscale materials. Capacitors are electrical components that are used to store energy. CUNY's unique capacitors are configured with advanced power circuits to more efficiently control and convert power to the LED lighting source. They also eliminate the need for large magnetic components, instead relying on networks of capacitors that can be easily printed on plastic substrate. CUNY's prototype LED power converter already meets DOE's 2020 projections for the energy efficiency of LED power converters.

  19. Kingsun Optoelectronics Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Kingsun Optoelectronics Co Ltd Place: Dongguan, Guangdong Province, China Product: A LED lighting product manufacturer and maker of LED streetlights and other LED light...

  20. LED Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    focusing light in ways that are useful in homes and commercial settings. The light-emitting diode (LED) is one of today's most energy-efficient and rapidly-developing lighting...

  1. LED Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    are directional, focusing light in ways that are useful in homes and commercial settings. The light-emitting diode (LED) is one of today's most energy-efficient and...

  2. Performance of T12 and T8 Fluorescent Lamps and Troffers and LED Linear Replacement Lamps CALiPER Benchmark Report

    SciTech Connect (OSTI)

    Myer, Michael; Paget, Maria L.; Lingard, Robert D.

    2009-01-16

    The Department of Energy (DOE) Commercially Available LED Product Evaluation and Reporting (CALiPER) Program was established in 2006 to investigate the performance of light-emitting diode (LED) based luminaires and replacement lamps. To help users better compare LED products with conventional lighting technologies, CALiPER has also performed benchmark research and testing of traditional (i.e., non-LED) lamps and fixtures. This benchmark report addresses standard 4-foot fluorescent lamps (i.e., T12 and T8) and the 2-foot by 4-foot recessed troffers in which they are commonly used. This report also examines available LED replacements for T12 and T8 fluorescent lamps, and their application in fluorescent troffers. The construction and operation of linear fluorescent lamps and troffers are discussed, as well as fluorescent lamp and fixture performance, based on manufacturer data and CALiPER benchmark testing. In addition, the report describes LED replacements for linear fluorescent lamps, and compares their bare lamp and in situ performance with fluorescent benchmarks on a range of standard lighting measures, including power usage, light output and distribution, efficacy, correlated color temperature, and the color rendering index. Potential performance and application issues indicated by CALiPER testing results are also examined.

  3. Demonstration Assessment of LED Roadway Lighting: Philadelphia...

    Office of Scientific and Technical Information (OSTI)

    LED Roadway Lighting: Philadelphia, PA Royer, Michael P.; Tuenge, Jason R.; Poplawski, Michael E. Roadway Lighting; Solid-state lighting; LED lighting; SSL; LED; GATEWAY Roadway...

  4. LED Frequently Asked Questions | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Frequently Asked Questions LED Frequently Asked Questions EERE Solid-State Lighting LED Factsheet PDF icon ledbasics.pdf More Documents & Publications LED Frequently Asked ...

  5. LED Directional Lamps | Department of Energy

    Energy Savers [EERE]

    Directional Lamps LED Directional Lamps BTP EERE Solid-State Lighting Program PDF icon led_directional_lamps.pdf More Documents & Publications Energy Savings Estimates of Light Emitting Diodes Recessed LED Downlights General Service LED Lamps

  6. General Service LED Lamps | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    General Service LED Lamps General Service LED Lamps A U.S. DOE SSL technology fact sheet that compares general service LED light bulbs with incandescent and CFL bulbs. PDF icon led_general-service-lamps.pdf More Documents & Publications LED Directional Lamps Emerging Lighting Technology LED T8 Replacement Lamps

  7. Multicolor, High Efficiency, Nanotextured LEDs

    SciTech Connect (OSTI)

    Jung Han; Arto Nurmikko

    2011-09-30

    We report on research results in this project which synergize advanced material science approaches with fundamental optical physics concepts pertaining to light-matter interaction, with the goal of solving seminal problems for the development of very high performance light emitting diodes (LEDs) in the blue and green for Solid State Lighting applications. Accomplishments in the duration of the contract period include (i) heteroepitaxy of nitrogen-polar LEDs on sapphire, (ii) heteroepitaxy of semipolar (11{bar 2}2) green LEDs on sapphire, (iii) synthesis of quantum-dot loaded nanoporous GaN that emits white light without phosphor conversion, (iv) demonstration of the highest quality semipolar (11{bar 2}2) GaN on sapphire using orientation-controlled epitaxy, (v) synthesis of nanoscale GaN and InGaN medium, and (vi) development of a novel liftoff process for manufacturing GaN thin-film vertical LEDs. The body of results is presented in this report shows how a solid foundation has been laid, with several noticeable accomplishments, for innovative research, consistent with the stated milestones.

  8. SSL Postings, January 22, 2015

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    environments. To learn more about how this type of environment affects LED lumen and color maintenance, luminaire efficacy, and luminaire component lifetimes, DOE's GATEWAY...

  9. LED lamp color control system and method

    SciTech Connect (OSTI)

    Gaines, James; Clauberg, Bernd; Van Erp, Josephus A.M.

    2013-02-05

    An LED lamp color control system and method including an LED lamp having an LED controller 58; and a plurality of LED channels 60 operably connected to the LED controller 58, each of the plurality of LED channels 60 having a channel switch 62 in series with at least one shunted LED circuit 83, the shunted LED circuit 83 having a shunt switch 68 in parallel with an LED source 80. The LED controller 58 determines whether the LED source 80 is in a feedback controllable range, stores measured optical flux for the LED source 80 when the LED source 80 is in the feedback controllable range, and bypasses storing the measured optical flux when the LED source 80 is not in the feedback controllable range.

  10. LED lamp power management system and method

    SciTech Connect (OSTI)

    Gaines, James; Clauberg, Bernd; Van Erp, Josephus A. M.

    2013-03-19

    An LED lamp power management system and method including an LED lamp having an LED controller 58; a plurality of LED channels 60 operably connected to the LED controller 58, each of the plurality of LED channels 60 having a channel switch 62 in series with at least one shunted LED circuit 83, the shunted LED circuit 83 having a shunt switch 68 in parallel with an LED source 80. The LED controller 58 reduces power loss in one of the channel switch 62 and the shunt switch 68 when LED lamp electronics power loss (P.sub.loss) exceeds an LED lamp electronics power loss limit (P.sub.lim); and each of the channel switches 62 receives a channel switch control signal 63 from the LED controller 58 and each of the shunt switches 68 receives a shunt switch control signal 69 from the LED controller 58.

  11. LedEngin Inc | Open Energy Information

    Open Energy Info (EERE)

    LedEngin Inc Jump to: navigation, search Name: LedEngin, Inc Place: Santa Clara, California Zip: 95054 Product: Developer of Light Emitting Diode (LED) technology for medical and...

  12. LED MR16 Lamps | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    report provides detailed analysis of LED MR16 lamp performance, covering basic performance ... Application Summary Report 22: LED MR16 Lamps An initial sample of 27 LED MR16 lamps and 8 ...

  13. LED MR16 Lamps | Department of Energy

    Energy Savers [EERE]

    LED MR16 Lamps LED MR16 Lamps A U.S. DOE Solid-State Lighting Program technology fact sheet on LED MR16 lamps. PDF icon led_mr16-lamps.pdf More Documents & Publications Report 22.1: Photoelectric Performance of LED MR16 Lamps Caliper Retail Lamps Study 3.1: Dimming, Flicker, and Power Quality Characteristics of LED A Lamps Snapshot: MR16 Lamps

  14. LED Lighting Facts | Department of Energy

    Office of Environmental Management (EM)

    LED Lighting Facts LED Lighting Facts LED lighting facts - A Program of the U.S. DOE DOE's LED Lighting Facts® program showcases LED products for general illumination from manufacturers who commit to testing products and reporting performance results according to industry standards. For lighting buyers, designers, and energy efficiency programs, the program provides information essential to evaluating SSL products. Central to the program is the LED Lighting Facts label, which presents

  15. LED Lighting Forecast | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Publications Market Studies LED Lighting Forecast LED Lighting Forecast The DOE report Energy Savings Forecast of Solid-State Lighting in General Illumination Applications ...

  16. Federally Led Accident Investigation Reports | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Federally Led Accident Investigation Reports Federally Led Accident Investigation Reports Includes Pre-March 2011 Type A Reports June 1, 1999 Type A Accident Investigation Board...

  17. Philadelphia International Airport Apron Lighting: LED System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Philadelphia International Airport Apron Lighting: LED System Performance in a Trial Installation Philadelphia International Airport Apron Lighting: LED System Performance in a ...

  18. Municipal Consortium LED Street Lighting Workshop Presentations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Boston, MA Municipal Consortium LED Street Lighting Workshop Presentations and ... U.S. Department of Energy Boston's LED Street Lighting Initiative Joanne Massaro, ...

  19. LED Frequently Asked Questions | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    document provides answers to LED frequently asked questions for plant-wide improvements, such as "Are LEDs ready for general lighting?" PDF icon LED Frequently Asked Questions (May 2011) More Documents & Publications LED Frequently Asked Questions Lighting Designer Roundtable on Solid-State Lighting SSL R&D Multi-Year Program Plan

  20. DOE ZERH Webinar: LED Lighting Efficiency

    Broader source: Energy.gov [DOE]

    Description: LED lighting offers efficiency and performance benefits we've never seen in traditional lighting technologies. Commercial buildings have seen rapid growth in LED deployment, and in the...

  1. Updating the LED Life Cycle Assessment

    Energy Savers [EERE]

    Part 2: LED Manufacturing and Performance 7 Goal of the New Study Review new literature on the life- cycle assessment of LED products. Determine if newer A-19 products...

  2. SemiLEDs | Open Energy Information

    Open Energy Info (EERE)

    SemiLEDs Place: Boise, Idaho Zip: 83702 Product: US-based LED chip maker with Asia manufacturing operations. Coordinates: 43.60698, -116.193409 Show Map Loading map......

  3. LED Solutions for the Dark Hours

    Energy Savers [EERE]

    technologies 5 LEDs for Street and Roadway Lighting Portland, OR Philadelphia, PA New York, NY Kansas City, MO 6 Boston Las Vegas Seattle Number of LED Replacements to Date (4...

  4. LEDs for Street Lighting—Here Today

    SciTech Connect (OSTI)

    2013-11-29

    Fact sheet that provides a brief overview of the viability of LED street lighting in municipalities and highlights case studies of two cities—Los Angeles and Seattle—that have invested in LED street lighting.

  5. Municipal Consortium LED Street Lighting Workshop Presentations...

    Energy Savers [EERE]

    Los Angeles, CA Municipal Consortium LED Street Lighting Workshop Presentations and ... Lighting L.M. Seventynine: Who Is He and What Does He Have to Do with LED Street Lighting? ...

  6. LED Roadway Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Roadway Lighting LED Roadway Lighting PDF icon I-35 Bridge Report, Phase II PDF icon I-35 ... GATEWAY Testing Results for I-35W Bridge Webinar LED Performance Under Tough Conditions

  7. LED Lighting: Just the Facts, Please!

    Broader source: Energy.gov [DOE]

    Now there's another arsenal in the toolbox to help consumers find LED lights they can trust: the Lighting Facts™ label.

  8. LED Watch: The Outlook for OLEDs

    Broader source: Energy.gov [DOE]

    December 2014 LED Watch: The Outlook for OLEDs James Brodrick, U.S. Department of Energy LD+A Magazine

  9. LED Lighting in a Performing Arts Center

    SciTech Connect (OSTI)

    Wilkerson, A. M.; Abell, T. C.; T., E. Perrin

    2015-07-31

    GATEWAY demonstration report of LED wall washer retrofit lighting at the University of Maryland Clarice Smith Performing Arts Center.

  10. LED North America - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LED North America Oak Ridge National Laboratory Success Story Details Partner Location Agreement Type Publication Date LED North America Oak Ridge, TN License July 2, 2013 Summary LED North America (LEDNA), founded in 2008, is a company located in Oak Ridge, Tennessee that produces LED alternatives for commercial lighting for applications such as roadways, parking lots, parking garages, and indoor high bay applications. The company is located in Oak Ridge at an incubator facility for the Oak

  11. LED ADOPTION REPORT | Department of Energy

    Energy Savers [EERE]

    Publications » Market Studies » LED ADOPTION REPORT LED ADOPTION REPORT LED ADOPTION REPORT The DOE report, Adoption of Light-Emitting Diodes in Common Lighting Applications, is the latest in a series analyzing markets where LEDs compete with traditional lighting sources. Report: Adoption of Light-Emitting Diodes in Common Lighting Applications Report Summary Full Infographic The new report reveals a wealth of insights into promising pathways for SSL technology development, providing estimates

  12. LED Lighting Basics | Department of Energy

    Office of Environmental Management (EM)

    LED Lighting Basics LED Lighting Basics August 16, 2013 - 10:07am Addthis Light-Emitting diodes (LEDs) efficiently produce light in a fundamentally different way than any legacy or traditional source of light. LEDs are compound semiconductor devices that produce light when an appropriate electrical current is applied. Applying electrical current causes electrons to flow from the positive side of a diode structure to the negative side causing a chain of complex interactions at an atomic level

  13. LED Essentials - Technology, Applications, Advantages, Disadvantages |

    Energy Savers [EERE]

    Department of Energy Essentials - Technology, Applications, Advantages, Disadvantages LED Essentials - Technology, Applications, Advantages, Disadvantages On October 11, 2007, Kevin Dowling, VP of Innovation for Philips Solid-State Lighting Solutions, presented a broad introduction to LED technology, and discussed the technology status, advantages and disadvantages, current applications, future potential, and evolving path of LED technology from indicator lights to general illumination. View

  14. Dual LED/incandescent security fixture

    DOE Patents [OSTI]

    Gauna, Kevin Wayne

    2005-06-21

    A dual LED and incandescent security lighting system uses a hybrid approach to LED illumination. It combines an ambient LED illuminator with a standard incandescent lamp on a motion control sensor. The LED illuminator will activate with the onset of darkness (daylight control) and typically remain on during the course of the night ("always on"). The LED illumination, typically amber, is sufficient to provide low to moderate level lighting coverage to the wall and ground area adjacent to and under the fixture. The incandescent lamp is integrated with a motion control circuit and sensor. When movement in the field of view is detected (after darkness), the incandescent lamp is switched on, providing an increased level of illumination to the area. Instead of an "always on" LED illuminator, the LEDs may also be switched off when the incandescent lamp is switched on.

  15. EECBG Success Story: Out with the Old, In with the New: New Hampshire...

    Broader source: Energy.gov (indexed) [DOE]

    throughout the town. | File photo EECBG Success Story: Small Nebraska Town Welcomes LEDs and Energy Savings Fort Fairfield's new energy efficient streetlights. | Photo courtesy...

  16. Civilight | Open Energy Information

    Open Energy Info (EERE)

    search Name: Civilight Place: Shenzhen, Guangdong Province, China Zip: 518108 Product: LED light bulb and streetlight maker. References: Civilight1 This article is a stub. You...

  17. EECBG Success Story: Lighting Retrofit Improving Visibility, Saving Energy

    Broader source: Energy.gov [DOE]

    Muscatine, Iowa is replacing 300 high-pressure sodium cobra head streetlights with LED fixtures, thanks to an Energy Efficiency and Conservation Block Grant. Learn more.

  18. Municipal Consortium LED Street Lighting Workshop Presentations...

    Energy Savers [EERE]

    Dallas, TX Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Dallas, TX This page provides links to the presentations given at the DOE Municipal ...

  19. LEDS Events Calendar | Open Energy Information

    Open Energy Info (EERE)

    Page Edit History LEDS Events Calendar (Redirected from CLEAN Calendar) Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports...

  20. LEDS Events Calendar | Open Energy Information

    Open Energy Info (EERE)

    Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History LEDS Events Calendar Jump to: navigation, search Home | About | Inventory | Partnerships |...

  1. Demonstration Assessment of LED Parking Structure Lighting

    SciTech Connect (OSTI)

    Kinzey, B. R.; Myer, M. A.

    2013-03-01

    GATEWAY program report on a demonstration of LED parking structure lighting at the U.S. Dept. of Labor headquarters in Washington, DC.

  2. Solid State Lighting LED Manufacturing Roundtable Summary

    SciTech Connect (OSTI)

    none,

    2010-03-31

    Summary of a meeting of LED experts to develop proposed priority tasks for the Manufacturing R&D initiative, including task descriptions, discussion points, recommendations, and presentation highlights.

  3. A Practical Primer to LED Technology

    Energy Savers [EERE]

    ssl.energy.gov 2011 LED Transformations, LLC 60 Acknowledgements Support for the development and presentation of this educational seminar was provided by the US Department of...

  4. Category:LEDS Toolkit | Open Energy Information

    Open Energy Info (EERE)

    meant to support the creation and implementation of a Low Emission Development Strategy. Pages in category "LEDS Toolkit" The following 14 pages are in this category, out of...

  5. LED Outdoor Area Lighting Fact Sheet

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Outdoor Area Lighting LED technology is rapidly becoming competitive with high-intensity discharge light sources for outdoor area lighting. This document reviews the major design ...

  6. Commercial Lighting and LED Lighting Incentives | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Schools Institutional Savings Category Lighting Lighting ControlsSensors Other EE LED Lighting Maximum Rebate Up to 100% of cost; incentives that exceed 5,000 should be...

  7. LED Lighting Facts Snapshot: Indoor Ambient Lighting

    SciTech Connect (OSTI)

    2013-04-01

    LED Lighting Facts Snapshot reports reveal how today's products really perform, drawing on analysis of verified performance data from the program's online product list.

  8. CALiPER Retail Lamps Study RRL3.2 Lumen and Chromaticity Maintenance of LED A lamps Operated in Steady-State Conditions

    SciTech Connect (OSTI)

    Royer, Michael P.; McCullough, Jeffrey J.; Tucker, Joseph C.

    2014-12-01

    The lumen depreciation and color shift of 17 different A lamps (15 LED, 1 CFL, 1 halogen) was monitored in the automated long-term test apparatus (ALTA) for more than 7,500 hours. Ten samples of each lamp model were tested, with measurements recorded on a weekly basis. The lamps were operated continuously at an ambient temperature of 45°C (-1°C). Importantly, the steady-state test conditions were not optimized for inducing catastrophic failure for any of the lamp technologies—to which thermal cycling is a strong contributor— and are not typical of normal use patterns—which usually include off periods where the lamp cools down. Further, the test conditions differ from those used in standardized long-term test methods (i.e., IES LM-80, IES LM-84), so the results should not be directly compared. On the other hand, the test conditions are similar to those used by ENERGY STAR (when elevated temperature testing is called for). Likewise, the conditions and assumptions used by manufacturers to generated lifetime claims may vary; the CALiPER long-term data is informative, but cannot necessarily be used to discredit manufacturer claims. The test method used for this investigation should be interpreted as one more focused on the long-term effects of elevated temperature operation, at an ambient temperature that is not uncommon in luminaires. On average, the lumen maintenance of the LED lamps monitored in the ALTA was better than benchmark lamps, but there was considerable variation from lamp model to lamp model. While three lamp models had average lumen maintenance above 99% at the end of the study period, two products had average lumen maintenance below 65%, constituting a parametric failure. These two products, along with a third, also exhibited substantial color shift, another form of parametric failure. While none of the LED lamps exhibited catastrophic failure—and all of the benchmarks did—the early degradation of performance is concerning, especially with a new technology trying to build a reputation with consumers. Beyond the observed parametric failures nearly half of the products failed to meet early-life thresholds for lumen maintenance, which were borrowed from ENERGY STAR specifications. That is, the lumen maintenance was sufficiently low at 6,000 hours that seven of the products are unlikely to have lumen maintenance above 70% at their rated lifetime (which was usually 25,000 hours). Given the methods used for this investigation—most notably continuous operation—the results should not be interpreted as indicative of a lamp’s performance in a typical environment. Likewise, these results are not directly relatable to manufacturer lifetime claims. This report is best used to understand the variation in LED product performance, compare the robustness of LED lamps and benchmark conventional lamps, and understand the characteristics of lumen and chromaticity change. A key takeaway is that the long-term performance of LED lamps can vary greatly from model to model (i.e., the technology is not homogenous), although the lamp-to-lamp consistency within a given model is relatively good. Further, operation of LED lamps in an enclosed luminaire (or otherwise in high ambient temperatures), can induce parametric failure of LEDs much earlier than their rated lifetime; manufacturer warnings about such conditions should be followed if performance degradation is unacceptable.

  9. Solving the 'Green Gap' in LED Technology

    Broader source: Energy.gov [DOE]

    One long-standing high-priority research area for DOE is to increase the efficiency of deep green LEDs. Although most products today use phosphor conversion (PC) to produce white light from a blue LED, having a good green source could lead to color-mixed white sources that would avoid the losses associated with the PC approach.

  10. Today LED Holiday Lights, Tomorrow the World?

    SciTech Connect (OSTI)

    Gordon, Kelly L.

    2004-12-20

    This article for The APEM Advantage, the quarterly newsletter of the Association of Professional Energy Managers (APEM) describes the recent increase in the popularity of light emitting diode (LED) lighting and compares LED light output with that of incandescent and compact fluorescent lighting.

  11. 100 LPW 800 Lm Warm White LED

    SciTech Connect (OSTI)

    Decai Sun

    2010-10-31

    An illumination grade warm white (WW) LED, having correlated color temperature (CCT) between 2800 K and 3500K and capable of producing 800 lm output at 100 lm/W, has been developed in this program. The high power WW LED is an ideal source for use as replacement for incandescent, and Halogen reflector and general purpose lamps of similar lumen value. Over the two year period, we have made following accomplishments: developed a high power warm white LED product and made over 50% improvements in light output and efficacy. The new high power WW LED product is a die on ceramic surface mountable LED package. It has four 1x1 mm{sup 2} InGaN pump dice flip chip attached to a ceramic submount in 2x2 array, covered by warm white phosphor ceramic platelets called Lumiramic™ and an overmolded silicone lens encapsulating the LED array. The performance goal was achieved through breakthroughs in following key areas: (1) High efficiency pump LED development through pump LED active region design and epi growth quality improvement (funded by internal programs). (2) Increase in injection efficiency (IE) represented by reduction in forward voltage (V{sub f}) through the improvement of the silver-based p-contact and a reduction in spreading resistance. The injection efficiency was increased from 80% at the start of the program to 96% at the end of the program at 700 mA/mm{sup 2}. (3) Improvement in thermal design as represented by reduction in thermal resistance from junction to case, through improvement of the die to submount connection in the thin film flip chip (TFFC) LED and choosing the submount material of high thermal conductivity. A thermal resistance of 1.72 K/W was demonstrated for the high power LED package. (4) Improvement in extraction efficiency from the LED package through improvement of InGaN die level and package level optical extraction efficiency improvement. (5) Improvement in phosphor system efficiency by improving the lumen equivalent (LE) and phosphor package efficiency (PPE) through improvement in phosphor-package interactions. Another achievement in the development of the phosphor integration technology is the demonstration of tight color control. The high power WW LED product developed has been proven to have good reliability. The manufacturing of the product will be done in Philips Lumileds’ LUXEON Rebel production line which has produced billions of high power LEDs. The first high power WW LED product will be released to the market in 2011.

  12. High Performance Green LEDs by Homoepitaxial

    SciTech Connect (OSTI)

    Wetzel, Christian; Schubert, E Fred

    2009-11-22

    This work's objective was the development of processes to double or triple the light output power from green and deep green (525 - 555 nm) AlGaInN light emitting diode (LED) dies within 3 years in reference to the Lumileds Luxeon II. The project paid particular effort to all aspects of the internal generation efficiency of light. LEDs in this spectral region show the highest potential for significant performance boosts and enable the realization of phosphor-free white LEDs comprised by red-green-blue LED modules. Such modules will perform at and outperform the efficacy target projections for white-light LED systems in the Department of Energy's accelerated roadmap of the SSL initiative.

  13. White LED with High Package Extraction Efficiency

    SciTech Connect (OSTI)

    Yi Zheng; Matthew Stough

    2008-09-30

    The goal of this project is to develop a high efficiency phosphor converting (white) Light Emitting Diode (pcLED) 1-Watt package through an increase in package extraction efficiency. A transparent/translucent monolithic phosphor is proposed to replace the powdered phosphor to reduce the scattering caused by phosphor particles. Additionally, a multi-layer thin film selectively reflecting filter is proposed between blue LED die and phosphor layer to recover inward yellow emission. At the end of the project we expect to recycle approximately 50% of the unrecovered backward light in current package construction, and develop a pcLED device with 80 lm/W{sub e} using our technology improvements and commercially available chip/package source. The success of the project will benefit luminous efficacy of white LEDs by increasing package extraction efficiency. In most phosphor-converting white LEDs, the white color is obtained by combining a blue LED die (or chip) with a powdered phosphor layer. The phosphor partially absorbs the blue light from the LED die and converts it into a broad green-yellow emission. The mixture of the transmitted blue light and green-yellow light emerging gives white light. There are two major drawbacks for current pcLEDs in terms of package extraction efficiency. The first is light scattering caused by phosphor particles. When the blue photons from the chip strike the phosphor particles, some blue light will be scattered by phosphor particles. Converted yellow emission photons are also scattered. A portion of scattered light is in the backward direction toward the die. The amount of this backward light varies and depends in part on the particle size of phosphors. The other drawback is that yellow emission from phosphor powders is isotropic. Although some backward light can be recovered by the reflector in current LED packages, there is still a portion of backward light that will be absorbed inside the package and further converted to heat. Heat generated in the package may cause a deterioration of encapsulant materials, affecting the performance of both the LED die and phosphor, leading to a decrease in the luminous efficacy over lifetime. Recent studies from research groups at Rensselaer Polytechnic Institute found that, under the condition to obtain a white light, about 40% of the light is transmitted outward of the phosphor layer and 60% of the light is reflected inward.1,2 It is claimed that using scattered photon extraction (SPE) technique, luminous efficacy is increased by 60%. In this project, a transparent/translucent monolithic phosphor was used to replace the powdered phosphor layer. In the normal pcLED package, the powdered phosphor is mixed with silicone either to be deposited on the top of LED die forming a chip level conversion (CLC) white LED or to be casted in the package forming a volume conversion white LED. In the monolithic phosphors there are no phosphor powder/silicone interfaces so it can reduce the light scattering caused by phosphor particles. Additionally, a multi-layer thin film selectively reflecting filter is inserted in the white LED package between the blue LED die and phosphor layer. It will selectively transmit the blue light from the LED die and reflect the phosphor's yellow inward emission outward. The two technologies try to recover backward light to the outward direction in the pcLED package thereby improving the package extraction efficiency.

  14. High Power UV LED Industrial Curing Systems

    SciTech Connect (OSTI)

    Karlicek, Robert, F., Jr; Sargent, Robert

    2012-05-14

    UV curing is a green technology that is largely underutilized because UV radiation sources like Hg Lamps are unreliable and difficult to use. High Power UV LEDs are now efficient enough to replace Hg Lamps, and offer significantly improved performance relative to Hg Lamps. In this study, a modular, scalable high power UV LED curing system was designed and tested, performing well in industrial coating evaluations. In order to achieve mechanical form factors similar to commercial Hg Lamp systems, a new patent pending design was employed enabling high irradiance at long working distances. While high power UV LEDs are currently only available at longer UVA wavelengths, rapid progress on UVC LEDs and the development of new formulations designed specifically for use with UV LED sources will converge to drive more rapid adoption of UV curing technology. An assessment of the environmental impact of replacing Hg Lamp systems with UV LED systems was performed. Since UV curing is used in only a small portion of the industrial printing, painting and coating markets, the ease of use of UV LED systems should increase the use of UV curing technology. Even a small penetration of the significant number of industrial applications still using oven curing and drying will lead to significant reductions in energy consumption and reductions in the emission of green house gases and solvent emissions.

  15. Decisions that led to Y-12

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Decisions that led to Y-12 Last week we saw the political and organizational changes that led up to the Manhattan Project being created on August 13, 1942. The S-1 Executive Committee created two sites initially, Site X in Tennessee and Site Y in New Mexico. While this was happening the technical and scientific experimentation was already well estab- lished. As early as 1929, Ernest O. Lawrence had invented the cyclotron, a mass spectrom-eter machine that led to the Calutrons (named so for the

  16. Getting Ready for LEDs: LED Lighting Video Series Explains the Basics

    Broader source: Energy.gov [DOE]

    A new video series from ElectricTV.net explains the changes and opportunities offered by LED lighting.

  17. LEDs Ready for Takeoff at Louisiana Airport

    Broader source: Energy.gov [DOE]

    About 250 lights along the busy taxiway at Hammond Northshore Regional Airport are being replaced with light-emitting diodes (LEDs) with funds from an Energy Efficiency and Conservation Block Grant (EECBG) from the U.S. Department of Energy.

  18. DOE Hosts LED Industry Standards Workshop

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy hosted an LED Industry Standards Workshop on March 1, 2006 in Washington, D.C. The Workshop provided a forum to encourage greater cooperation and coordination among...

  19. Text-Alternative Version LED Lighting Forecast

    Broader source: Energy.gov [DOE]

    The DOE report Energy Savings Forecast of Solid-State Lighting in General Illumination Applications estimates the energy savings of LED white-light sources over the analysis period of 2013 to 2030....

  20. LED Color Stability: 10 Important Questions

    Broader source: Energy.gov [DOE]

    This April 15, 2014 webinar examined the causes of color shift, and took a look at existing metrics used to describe color shift/color stability in LED lighting. The lumen maintenance lifetime of...

  1. LEDS Toolkit and Framework | Open Energy Information

    Open Energy Info (EERE)

    User Interface: Website, Desktop Application Website: en.openei.orgappsLEDS Cost: Free UN Region: Central Asia, Eastern Asia, South-Eastern Asia, "Pacific" is not in the list...

  2. SunLed Technologies | Open Energy Information

    Open Energy Info (EERE)

    Product: Hyderabad-based end-to-end energy efficient lighting solution provider and ESCO focused on LEDs and solar power. Coordinates: 17.6726, 77.5971 Show Map Loading...

  3. Demonstration Assessment of LED Freezer Case Lighting

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Demonstration Assessment of Light-Emitting Diode (LED) Freezer Case Lighting Host Site: Albertsons Grocery, Eugene, Oregon Final Report prepared in support of the U.S. DOE Solid State Lighting Technology Demonstration GATEWAY Program Study Participants: Pacific Northwest National Laboratory U.S. Department of Energy LED Power, Inc. Aztec Energy Partners PECI, Inc. Eugene Water and Electric Board October 2009 Prepared for the U.S. Department of Energy by Pacific Northwest National Laboratory

  4. LED PAR38 Lamps | Department of Energy

    Energy Savers [EERE]

    PAR38 Lamps LED PAR38 Lamps The following CALiPER reports provide detailed analysis of LED PAR38 lamp performance, covering basic performance characteristics as well as subjective evaluation of beam, shadow, and color quality. Pending reports will offer analysis on flicker, dimming and power quality characteristics; stress testing; and lumen and chromaticity maintenance. These reports are intended to educate the industry on market trends, potential issues, and important areas for improvement.

  5. Testimonials - Partnerships in LED Lighting - Philips Lumileds

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lighting, LLC | Department of Energy LED Lighting - Philips Lumileds Lighting, LLC Testimonials - Partnerships in LED Lighting - Philips Lumileds Lighting, LLC Addthis Text Version The words "Office of Energy Efficiency & Renewable Energy, U.S. Department of Energy, EERE Partnership Testimonials," appear on the screen, followed by "Sunil Thomas, General Manager of San Jose Manufacturing Site, Philips Lumileds Lighting, LLC" and footage of a man sitting in a showcase

  6. LED Product Development and Manufacturing R&D Roundtable Summary...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LED Product Development and Manufacturing R&D Roundtable Summary LED Product Development and Manufacturing R&D Roundtable Summary PDF icon LED Product Dev and Mfg Roundtable ...

  7. LEDS GP Success Story: Fostering Coordinated LEDS Support in Kenya (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-03-01

    The LEDS Global Partnership (LEDS GP) strives to advance climate-resilient, low-emission development through catalyzing collaboration, information exchange, and action on the ground. The Government of Kenya is a key LEDS GP member and offers an inspiring example of how LEDS GP is having an impact globally. The 2012 LEDS Collaboration in Action workshop in London provided an interactive space for members to share experiences on cross-ministerial LEDS leadership and to learn about concrete development impacts of LEDS around the world. Inspired by these stories, the Kenya's Ministry of State for Planning, National Development and Vision 2030 (MPND) began to collaborate closely with the Ministry of Environment and Mineral Resources to create strong links between climate change action and development in the country, culminating in the integration of Kenya's National Climate Change Action Plan and the country's Medium Term Development Plan.

  8. It's 2015: Should All Your Sockets be Filled with LEDs?

    Energy Savers [EERE]

    - mid-power LEDs on PCb used in 2x4 troffers 4 LED Modules and Light Engines GE Infusion Philips Fortimo Osram PrevaLED 5 LEDs: A New Light Source for Everything * Outdoor...

  9. Memorandum of Decision: Withdrawal of LED Lighting Waiver | Department...

    Office of Environmental Management (EM)

    LED Lighting Waiver Memorandum of Decision: Withdrawal of LED Lighting Waiver novemberdecisionwithdraw More Documents & Publications Nationwide Nonavailability Waiver: November...

  10. Pittsburgh LED Street Lighting Research Project Performance Criteria

    Broader source: Energy.gov [DOE]

    A Pittsburgh LED Street Lighting Research Project document on Technical and Aesthetic Performance for Business District LED Lighting.

  11. Next-Generation LED Package Architectures Enabled by Thermally...

    Energy Savers [EERE]

    LED Package Architectures Enabled by Thermally Conductive Transparent Encapsulants Next-Generation LED Package Architectures Enabled by Thermally Conductive Transparent ...

  12. Adoption of Light-Emitting Diodes in Common Lighting Applications

    SciTech Connect (OSTI)

    Yamada, Mary; Chwastyk, Dan

    2013-05-01

    Report estimating LED energy savings in nine applications where LEDs compete with traditional lighting sources such as incandescent, halogen, high-pressure sodium, and certain types of fluorescent. The analysis includes indoor lamp, indoor luminaire, and outdoor luminaire applications.

  13. DOE Publishes GATEWAY Report on Exterior Lighting at Princeton...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Replacing seven high-pressure sodium (HPS) luminaires with LED luminaires along a pedestrian walkway in 2008 allowed the school to test the new LED technology in a small-scale ...

  14. DOE Publishes CALiPER Report on the Photometric Testing of White...

    Office of Environmental Management (EM)

    Photometric Testing of White-Tunable LED Luminaires DOE Publishes CALiPER Report on the Photometric Testing of White-Tunable LED Luminaires September 24, 2015 - 4:22pm Addthis The ...

  15. Municipal Consortium Releases Updated Model Specification for...

    Energy Savers [EERE]

    for LED Roadway Luminaires Municipal Consortium Releases Updated Model Specification for LED Roadway Luminaires July 10, 2014 - 10:23am Addthis The U.S. Department of Energy's ...

  16. LED structure with enhanced mirror reflectivity

    SciTech Connect (OSTI)

    Bergmann, Michael; Donofrio, Matthew; Heikman, Sten; Schneider, Kevin S; Haberern, Kevin W; Edmond, John A

    2014-04-01

    Embodiments of the present invention are generally related to LED chips having improved overall emission by reducing the light-absorbing effects of barrier layers adjacent mirror contacts. In one embodiment, a LED chip comprises one or more LEDs, with each LED having an active region, a first contact under the active region having a highly reflective mirror, and a barrier layer adjacent the mirror. The barrier layer is smaller than the mirror such that it does not extend beyond the periphery of the mirror. In another possible embodiment, an insulator is further provided, with the insulator adjacent the barrier layer and adjacent portions of the mirror not contacted by the active region or by the barrier layer. In yet another embodiment, a second contact is provided on the active region. In a further embodiment, the barrier layer is smaller than the mirror such that the periphery of the mirror is at least 40% free of the barrier layer, and the second contact is below the first contact and accessible from the bottom of the chip.

  17. LED ADOPTION REPORT | Department of Energy

    Energy Savers [EERE]

    ADOPTION REPORT LED ADOPTION REPORT PDF icon Report: Adoption of Light-Emitting Diodes in Common Lighting Applications PDF icon Report Summary PDF icon Full Infographic More Documents & Publications Energy Savings Forecast of Solid-State Lighting in General Illumination Applications 2015 SSL TECHNOLOGY DEVELOPMENT WORKSHOP PRESENTATIONS - Day 1 Energy Savings Estimates of Light Emitting Diodes

  18. Sustainable LED Fluorescent Light Replacement Technology

    SciTech Connect (OSTI)

    2011-06-30

    Ilumisys and the National Center for Manufacturing Sciences (NCMS) partnered on a three-year project awarded by the United States (U.S.) Department of Energy (DOE), to quantify the impacts of LED lamps, incandescent lamps and fluorescent benchmark lamps over a product lifecycle – i.e. to develop a sustainable design and manufacturing strategy that addresses product manufacturing, use, recycling and disposal scenarios for LED-based lighting. Based on the knowledge gained from extensive product tear-down studies of fluorescent and screw-in lighting products, lifecycle assessment tools, and accelerated lifecycle testing protocols, an interactive Sustainable LED Design Guide has been developed to aid architectural and lighting designers and engineers in making design decisions that consider three important environmental impacts (greenhouse gas emissions, energy use and mercury emission) across all phases of the life of an LED lighting product. Critical information developed for the lifecycle analysis and product feature comparisons is the useful life of the lighting product as well as its performance. The Design Guide is available at www.ncms.org, and was developed based on operational and durability testing of a variety of lighting products including power consumption, light output, and useful life of a lamp in order to allow a more realistic comparison of lamp designs. This report describes the main project tasks, results and innovative features of the lifecycle assessment (LCA)-based design tools, and the key considerations driving the sustainable design of LED lighting systems. The Design Guide incorporates the following three novel features for efficiently evaluating LED lighting features in value-chains: • Bill-of-Materials (BOM) Builder – Designers may import process data for each component and supply functional data for the product, including power, consumption, lumen output and expected useful life. • Environmental Impact Review – Designs are comparable across lifecycle phases, subsystems, and environmental impact category, and can be normalized to a userdefined functional unit. • Drill-down Review – These provide an indepth look at individual lamp designs with the ability to review across subsystem or lifecycle phase.

  19. Final decisions that led to Y-12

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    decisions that led to Y-12 As we have seen earlier in this series, Ernest O. Lawrence and his University of California Radiation Lab in Berkeley was the center for research using cyclotrons to separate uranium 235 from natural uranium in machines referred to as Calutrons. These newly designed machines were named for CALifornia University CycloTRONS. While the use of mass spectrometry had been known and used since 1918, this application on the scale Lawrence was proposing was going way beyond

  20. Development of Production PVD-AIN Buffer Layer System and Processes to Reduce Epitaxy Costs and Increase LED Efficiency

    SciTech Connect (OSTI)

    Cerio, Frank

    2013-09-14

    The DOE has set aggressive goals for solid state lighting (SSL) adoption, which require manufacturing and quality improvements for virtually all process steps leading to an LED luminaire product. The goals pertinent to this proposed project are to reduce the cost and improve the quality of the epitaxial growth processes used to build LED structures. The objectives outlined in this proposal focus on achieving cost reduction and performance improvements over state-of-the-art, using technologies that are low in cost and amenable to high efficiency manufacturing. The objectives of the outlined proposal focus on cost reductions in epitaxial growth by reducing epitaxy layer thickness and hetero-epitaxial strain, and by enabling the use of larger, less expensive silicon substrates and would be accomplished through the introduction of a high productivity reactive sputtering system and an effective sputtered aluminum-nitride (AlN) buffer/nucleation layer process. Success of the proposed project could enable efficient adoption of GaN on-silicon (GaN/Si) epitaxial technology on 150mm silicon substrates. The reduction in epitaxy cost per cm{sup 2} using 150mm GaN-on-Si technology derives from (1) a reduction in cost of ownership and increase in throughput for the buffer deposition process via the elimination of MOCVD buffer layers and other throughput and CoO enhancements, (2) improvement in brightness through reductions in defect density, (3) reduction in substrate cost through the replacement of sapphire with silicon, and (4) reduction in non-ESD yield loss through reductions in wafer bow and temperature variation. The adoption of 150mm GaN/Si processing will also facilitate significant cost reductions in subsequent wafer fabrication manufacturing costs. There were three phases to this project. These three phases overlap in order to aggressively facilitate a commercially available production GaN/Si capability. In Phase I of the project, the repeatability of the performance was analyzed and improvements implemented to the Veeco PVD-AlN prototype system to establish a specification and baseline PVD-AlN films on sapphire and in parallel the evaluation of PVD AlN on silicon substrates began. In Phase II of the project a Beta tool based on a scaled-up process module capable of depositing uniform films on batches of 4”or 6” diameter substrates in a production worthy operation was developed and qualified. In Phase III, the means to increase the throughput of the PVD-AlN system was evaluated and focused primarily on minimizing the impact of the substrate heating and cooling times that dominated the overall cycle time.

  1. Challenges in LED Research and Development | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LED Research and Development Challenges in LED Research and Development View the video about LED lighting technology, where it is headed, and the DOE's role in its continued R&D

  2. A Statistical Method Analyzing LED Lumen Depreciation and Projecting LED Life

    SciTech Connect (OSTI)

    Qiao, Hong; Pulsipher, Trenton C.; Hathaway, John E.; Richman, Eric E.; Radkov, Emil

    2010-05-30

    There is a strong need for a method to represent the potential life of LED products as a critical part of design decisions including cost-effectiveness analysis. The IES LM-80 test method is in place to collect lumen depreciation data but it does not provide for estimation of future long term depreciation. Separate estimation methods are being considered (TM-21) and this paper describes the analysis of a series of LED degradation models and subsequent development of an estimation method. The work involves analysis of a set of engineering models to determine their applicability and define a structure for their use in LED lumen output life based on a lumen output level such as the L70 metric. The analysis has provided valuable information on methods effectively estimating LED life time, and impacts of measurement uncertainties, test duration, interval and other test conditions on selecting degradation models and LED life time projection. A set of guidelines are recommended to estimate LED life from data obtained using the current LM-80 test method.

  3. LEDS Collaboration in Action Workshop Attendee List | Open Energy...

    Open Energy Info (EERE)

    LEDS Collaboration in Action Workshop Attendee List (Redirected from LEDS Collaboration in Action Workshop Participating Countries) Jump to: navigation, search Low Emission...

  4. Color Maintenance of LEDs in Laboratory and Field Applications...

    Office of Scientific and Technical Information (OSTI)

    for parametric failure of LED products has largely been focused on lumen maintenance. ... Subject: Light-emitting diode (LED), color shift, color stability, color maintenance, ...

  5. Exterior LED Lighting Projects at Princeton University | Department...

    Energy Savers [EERE]

    Exterior LED Lighting Projects at Princeton University Exterior LED Lighting Projects at Princeton University 2015gatewayprinceton-exterior.pdf gatewayprinceton-exteriorbrief.p...

  6. Demonstration of LED Street Lighting in Kansas City, MO (Technical...

    Office of Scientific and Technical Information (OSTI)

    Report: Demonstration of LED Street Lighting in Kansas City, MO Citation Details In-Document Search Title: Demonstration of LED Street Lighting in Kansas City, MO Nine different ...

  7. Technical Feasibility Assessment of LED Roadway Lighting on the...

    Office of Scientific and Technical Information (OSTI)

    of LED Roadway Lighting on the Golden Gate Bridge Citation Details In-Document Search Title: Technical Feasibility Assessment of LED Roadway Lighting on the Golden Gate ...

  8. Guanquan Shandong Photoelectric Technology aka United LED Corporation...

    Open Energy Info (EERE)

    Guanquan Shandong Photoelectric Technology aka United LED Corporation Jump to: navigation, search Name: Guanquan (Shandong) Photoelectric Technology (aka United LED Corporation)...

  9. Demonstration Assessment of Light-Emitting Diode (LED) Freezer...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Demonstration Assessment of Light-Emitting Diode (LED) Freezer Case Lighting Demonstration Assessment of Light-Emitting Diode (LED) Freezer Case Lighting This document is a report ...

  10. REA Refrigerated Display Case LED Lighting Performance Specification...

    Office of Environmental Management (EM)

    REA Refrigerated Display Case LED Lighting Performance Specification REA Refrigerated Display Case LED Lighting Performance Specification A Retailer Energy Alliances (REA) Project ...

  11. Member Case Studies: LED Street Lighting Programs in Algona ...

    Energy Savers [EERE]

    Member Case Studies: LED Street Lighting Programs in Algona (IA), Asheville (NC), and Boston (MA) Member Case Studies: LED Street Lighting Programs in Algona (IA), Asheville (NC), ...

  12. New GATEWAY Report Monitors LED System Performance in a High...

    Office of Environmental Management (EM)

    GATEWAY Report Monitors LED System Performance in a High-Temperature Environment New GATEWAY Report Monitors LED System Performance in a High-Temperature Environment May 11, 2015 - ...

  13. Energy Department Announces New University-Led Projects to Create...

    Office of Environmental Management (EM)

    University-Led Projects to Create More Efficient, Lower Cost Concentrating Solar Power Systems Energy Department Announces New University-Led Projects to Create More Efficient, ...

  14. Demonstration Assessment of Light Emitting Diode (LED) Street...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Demonstration Assessment of Light Emitting Diode (LED) Street Lighting, Final Report Demonstration Assessment of Light Emitting Diode (LED) Street Lighting, Final Report This ...

  15. High Impact Technology HQ - Results - LED Troffer, Cove (linear...

    Energy Savers [EERE]

    HQ - Results - LED Troffer, Cove (linear) and Downlight Retrofit Kits: Princeton Icahn Laboratory High Impact Technology HQ - Results - LED Troffer, Cove (linear) and Downlight ...

  16. NETL-Led Laboratory-Industry-Academia Collaboration Is Accelerating...

    Office of Environmental Management (EM)

    NETL-Led Laboratory-Industry-Academia Collaboration Is Accelerating Carbon-Capture Technologies NETL-Led Laboratory-Industry-Academia Collaboration Is Accelerating Carbon-Capture ...

  17. LED Efficacy: What America Stands to Gain | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Efficacy: What America Stands to Gain LED Efficacy: What America Stands to Gain PDF icon LED Efficacy-What America Stands to Gain November 2015.pdf

  18. New DOE Report Estimates LED Savings in Common Lighting Applications...

    Broader source: Energy.gov (indexed) [DOE]

    of LED penetration in 10 lighting applications, as well as the potential energy savings if each of these applications had switched completely to the best available LED ...

  19. LED Provides Effective and Efficient Parking Area Lighting at...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LED Provides Effective and Efficient Parking Area Lighting at the NAVFAC Engineering Service Center LED Provides Effective and Efficient Parking Area Lighting at the NAVFAC ...

  20. Consortium Led by University of California, Berkeley Awarded...

    National Nuclear Security Administration (NNSA)

    Consortium Led by University of California, Berkeley Awarded 25M NNSA Grant for Nuclear ... Home Library Press Releases Consortium Led by University of California, Berkeley ... ...

  1. LEDs Go Ivy League: Princeton's Dillon Gymnasium | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    View the video about LED lighting in Dillon Gymnasium, a focal point of sports and recreation at Princeton since 1947. William Evans discusses measurable benefits of LED lighting ...

  2. Solid State Lighting LED Core Technology R&D Roundtable

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The document should be referenced as: DOE SSL Program, "Solid State Lighting LED Core Technology R&D Roundtable," November 2015. Authors Monica Hansen LED Lighting Advisors Nnamnor ...

  3. Analysis Led Intake Port Development | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Led Intake Port Development Analysis Led Intake Port Development 2005 Diesel Engine Emissions Reduction (DEER) Conference Presentations and Posters PDF icon 2005deerfuchinoue.pdf ...

  4. (Expired) Nationwide Limited Public Interest Waiver for LED Lighting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Limited Public Interest Waiver for LED Lighting and HVAC Units: February 11, 2010 (Expired) Nationwide Limited Public Interest Waiver for LED Lighting and HVAC Units: February ...

  5. Which LED Lighting Products Would You Consider Trying?

    Broader source: Energy.gov [DOE]

    Which LED lighting products would you consider trying? Or, if you're already using LEDs, what do you think of them?

  6. Technical Feasibility Assessment of LED Roadway Lighting on the...

    Office of Scientific and Technical Information (OSTI)

    Technical Feasibility Assessment of LED Roadway Lighting on the Golden Gate Bridge Tuenge, Jason R. LED; induction; ceramic metal halide; plasma; roadway lighting; Golden Gate...

  7. New and Underutilized Technology: High Bay LED Lighting

    Broader source: Energy.gov [DOE]

    The following information outlines key deployment considerations for high bay LED lighting within the Federal sector.

  8. Text-Alternative Version: LED Essentials- Technology, Applications, Advantages, Disadvantages

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the LED Essentials - Technology, Applications, Advantages, Disadvantages webcast.

  9. LED T8 Replacement Lamps | Department of Energy

    Energy Savers [EERE]

    LED T8 Replacement Lamps LED T8 Replacement Lamps This documents provides an overview of LED T8 replacement lamps and helps define a reasonable minimum performance level for the purpose of plant-wide improvement. PDF icon LED T8 Replacement Lamps (April 2010) More Documents & Publications Emerging Lighting Technology General Service LED Lamps Guiding Market Introduction of High-Performance SSL Products

  10. LED R&D | Department of Energy

    Office of Environmental Management (EM)

    LED R&D LED R&D DOE-funded LED R&D projects tackle the science and technology challenges that stand in the way of achieving SSL Program targets for LED efficacy, performance, and cost. All project selections align with the priorities and targets detailed in the SSL R&D Plan, updated annually with industry input. Learn more about R&D challenges to accelerate LED technology advances. View details about the current LED R&D projects below. Novel Transparent Phosphor

  11. EERE News | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    April 10, 2014 DOE Announces Webinars on Maintenance Practices for LED Streetlights, LED Color Stability, and More EERE offers webinars to the public on a range of subjects, from...

  12. File:(131112) Presentacion LAC LEDs.pdf | Open Energy Information

    Open Energy Info (EERE)

    (131112) Presentacion LAC LEDs.pdf Jump to: navigation, search File File history File usage File:(131112) Presentacion LAC LEDs.pdf Size of this preview: 800 600 pixels. Go to...

  13. MOF Coating a Promising Path to White LEDs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MOF Coating a Promising Path to White LEDs MOF Coating a Promising Path to White LEDs Print Friday, 27 February 2015 17:11 Hu et al. designed a new yellow phosphor with high...

  14. Demonstration Assessment of Light-Emitting Diode (LED) Parking...

    Office of Scientific and Technical Information (OSTI)

    Diode (LED) Parking Lot Lighting at T.J.Maxx in Manchester, NH Phase I A report describing the process and results of replacing existing parking lot lighting, looking at a LED ...

  15. DOE Publishes GATEWAY Report on LED Lighting in a Performing...

    Energy Savers [EERE]

    LED Lighting in a Performing Arts Setting DOE Publishes GATEWAY Report on LED Lighting in a Performing Arts Setting August 6, 2014 - 2:46pm Addthis The U.S. Department of Energy ...

  16. To Bridge LEDs' Green Gap, Scientists Think Small

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    gap," a portion of the spectrum where LED efficiency plunges, simulations at the U.S. ... Instead, most white lighting today comes from blue LED light passed through a phosphor, a ...

  17. CALiPER Application Summary Report 19. LED Linear Pendants

    SciTech Connect (OSTI)

    none,

    2012-10-01

    Report 19 reviews the independently tested performance of nine LED linear pendants and also evaluates a collection of 11 linear pendant products available in both an LED and fluorescent version.

  18. Team Led by Argonne National Lab Selected as DOE's Batteries...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Team Led by Argonne National Lab Selected as DOE's Batteries and Energy Storage Hub On ... to announce that a multi-partner team led by Argonne National Laboratory has been ...

  19. EECBG Success Story: Solar LED Light Pilot Project Illuminates...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar LED Light Pilot Project Illuminates the Way in Alabama EECBG Success Story: Solar LED Light Pilot Project Illuminates the Way in Alabama September 12, 2012 - 2:15pm Addthis ...

  20. Reducing LED Costs Through Innovation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reducing LED Costs Through Innovation Reducing LED Costs Through Innovation November 19, 2013 - 3:49pm Addthis A combination solid-state laser turret cutter and stamping machine ...

  1. Color Maintenance of LEDs in Laboratory and Field Applications...

    Office of Scientific and Technical Information (OSTI)

    GATEWAY program report on color shift data of LED lamps used in real-world applications as well as LED products monitored by the CALiPER program in a lab environment. Authors: ...

  2. LED Traffic Lights Get Buy American Stamp | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    over the past two years. Red. Yellow. Green. What LED traffic signals don't say: Made in USA. That is changing. Dialight Corporation, an LED lighting manufacturer with U.S....

  3. Text-Alternative Version: Challenges in LED Research and Development

    Broader source: Energy.gov [DOE]

    Narrator: LEDs have made remarkable progress in the past decade and gained a strong foothold in the US marketplace. In 2012, LED lighting saved an estimated 71 trillion BTUs, equivalent to annual...

  4. List of LED Exit Signs Incentives | Open Energy Information

    Open Energy Info (EERE)

    upgrades Water Heaters Whole House Fans LED Exit Signs CHPCogeneration Biomass Photovoltaics Yes Energy Optimization (Electric) - Commercial Efficiency Program...

  5. Text-Alternative Version: Evaluating LED Street Lighting Solutions

    Office of Energy Efficiency and Renewable Energy (EERE)

    Below is the text-alternative version of the Evaluating LED Street Lighting Solutions webcast, held July 20, 2010.

  6. Demonstration of Light-Emitting Diode (LED) Retrofit Lamps

    SciTech Connect (OSTI)

    Miller, N.

    2011-09-01

    GATEWAY program report on a demonstration of LED retrofit lamps at the Jordan Schnitzer Museum of art in Eugene, OR

  7. Text-Alternative Version: LED Replacements for Linear Fluorescent Lamps

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the "LED Replacements for Linear Fluorescent Lamps" webcast, held June 20, 2011.

  8. Text-Alternative Version: LEDs for Interior Office Applications

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the LEDs for Interior Office Applications webcast, held March 18, 2010.

  9. LED Parking Lot Lighting Working Group Fact Sheet

    SciTech Connect (OSTI)

    2008-10-01

    This fact sheet describes the Retailer Energy Alliance LED Parking Lot Lighting Working Group and its Technology Procurement Project.

  10. Simple Modular LED Cost Model | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tools » Simple Modular LED Cost Model Simple Modular LED Cost Model The LED Cost Model, developed by the DOE Cost Modeling Working Group, provides a simplified method for analyzing the manufacturing costs of an LED package. The model focuses on the major cost elements and includes preliminary raw data and manufacturing process flow, which provide a starting point and can be customized by the user to model different processes, materials, and equipment. The tool enables those involved in the

  11. DOE Publishes Technical Brief Clarifying Misconceptions about Safety of LED

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lighting | Department of Energy Technical Brief Clarifying Misconceptions about Safety of LED Lighting DOE Publishes Technical Brief Clarifying Misconceptions about Safety of LED Lighting October 22, 2014 - 12:00pm Addthis The spectral emission of LEDs is a frequent subject of concern, so to set the record straight, the U.S. Department of Energy has published a technical brief entitled True Colors: LEDs and the Relationship Between CCT, CRI, Optical Safety, Material Degradation, and

  12. High Impact Technology HQ - Results - LED Troffer, Cove (linear) and

    Energy Savers [EERE]

    Downlight Retrofit Kits: Princeton Icahn Laboratory | Department of Energy HQ - Results - LED Troffer, Cove (linear) and Downlight Retrofit Kits: Princeton Icahn Laboratory High Impact Technology HQ - Results - LED Troffer, Cove (linear) and Downlight Retrofit Kits: Princeton Icahn Laboratory PDF icon LED Troffer, Cove (linear) and Downlight Retrofit Kits: Princeton Icahn Laboratory More Documents & Publications DOE Booth Presentations From Grainger Show 2015 Downloads Exterior LED

  13. Study: Environmental Benefits of LEDs Greater Than CFLs | Department of

    Energy Savers [EERE]

    Energy Study: Environmental Benefits of LEDs Greater Than CFLs Study: Environmental Benefits of LEDs Greater Than CFLs December 9, 2013 - 4:13pm Addthis A three-part Energy Department-funded study indicates LEDs are more environmentally friendly than compact fluorescent and incandescent lights. | Energy Department graphic A three-part Energy Department-funded study indicates LEDs are more environmentally friendly than compact fluorescent and incandescent lights. | Energy Department graphic

  14. Considerations When Comparing LED and Conventional Lighting | Department of

    Office of Environmental Management (EM)

    Energy Using LEDs » Considerations When Comparing LED and Conventional Lighting Considerations When Comparing LED and Conventional Lighting When comparing LED lighting performance to conventional lighting, buyers will want to consider energy efficiency, operating life and lumen depreciation, light output/distribution, color quality, color shift, dimmability, and expected lifetime. Energy efficiency The final energy efficiency of any lighting system depends on more than the efficacy of the

  15. Philadelphia International Airport Apron Lighting: LED System Performance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in a Trial Installation | Department of Energy Philadelphia International Airport Apron Lighting: LED System Performance in a Trial Installation Philadelphia International Airport Apron Lighting: LED System Performance in a Trial Installation PDF icon 2015_gateway_philadelphia-airport.pdf PDF icon gateway_philadelphia-airport_brief.pdf More Documents & Publications LED Performance Under Tough Conditions December 2015 Postings 2015 ARTICLES

  16. LEDs Go Ivy League: Princeton University and DOE GATEWAY Demonstrations |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Princeton University and DOE GATEWAY Demonstrations LEDs Go Ivy League: Princeton University and DOE GATEWAY Demonstrations View the video about LED lighting at Princeton University, which has dramatically reduced energy costs in a number of installations around campus. William Evans, electrical engineer, describes the uses, benefits, and progress of LED lighting at Princeton

  17. DOE Publishes Report on Color Stability of LED Lighting Products

    Broader source: Energy.gov [DOE]

    DOE has published a new GATEWAY report on color maintenance of LEDs in laboratory and field applications, summarizing color shift data of LED lamps used in real-world applications as well as LED products monitored by the CALiPER program in a lab

  18. LEDs Go Ivy League: Princeton University and DOE GATEWAY Demonstrations |

    Energy Savers [EERE]

    Department of Energy Princeton University and DOE GATEWAY Demonstrations LEDs Go Ivy League: Princeton University and DOE GATEWAY Demonstrations View the video about LED lighting at Princeton University, which has dramatically reduced energy costs in a number of installations around campus. William Evans, electrical engineer, describes the uses, benefits, and progress of LED lighting at Princeton

  19. To Bridge LEDs' Green Gap, Scientists Think Small

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    To Bridge LEDs' Green Gap, Scientists Think Small To Bridge LEDs' Green Gap, Scientists Think Small Nanostructures Half a DNA Strand-Wide Show Promise for Efficient LEDs April 4, 2014 Contact: Margie Wylie, mwylie@lbl.gov, +1 510 486 7421 Nanostructures half the breadth of a DNA strand could improve the efficiency of light emitting diodes (LEDs), especially in the "green gap," a portion of the spectrum where LED efficiency plunges, simulations at the U.S. Department of Energy's

  20. LED Performance Specification Series: T8 Replacement Lamps

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Photo credit: PNNL LED T8 replacements may contain dozens of high power LEDs or hundreds of 5mm LEDs behind a clear or frosted lens, all in a medium bi-pin T8 lamp package. Table 1. CALiPER Test Results for 4-foot LED T8 Replacements with Fluorescent Benchmarks Performance Characteristics LED T8 Replacements Fluorescent Benchmarks Range (12 lamps tested) Average Mfr. Data (75 lamps) CALiPER (2 fxtures tested) Initial Lamp Light Output (lm) 345 - 1,579 1,111 2,778 3,091 Initial 2-Lamp System

  1. LED Linear Lamps and Troffer Lighting | Department of Energy

    Energy Savers [EERE]

    Linear Lamps and Troffer Lighting LED Linear Lamps and Troffer Lighting View the video about CALiPER Series 21 on LED Linear Lamps and Troffer Lighting. The CALiPER program performed a series of investigations on linear LED lamps. Each report in the series covers the performance of up to 31 linear LED lamps, which were purchased in late 2012 or 2013. The first report focuses on bare lamp performance of LED T8 replacement lamps and subsequent reports examine performance in various troffers, as

  2. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    Efficiency Driving Electronics for General Illumination LED Luminaires Upadhyay Anand ENERGY CONSERVATION CONSUMPTION AND UTILIZATION New generation of standalone LED driver...

  3. High Efficiency Driving Electronics for General Illumination...

    Office of Scientific and Technical Information (OSTI)

    Driving Electronics for General Illumination LED Luminaires Upadhyay, Anand 32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION New generation of standalone LED driver platforms...

  4. Promising Technology: Parking Lot Light-Emitting Diodes with Controls

    Broader source: Energy.gov [DOE]

    LEDs offer several advantages over conventional high intensity discharge (HID) luminaires. LEDs have longer life times, reduced maintenance and operating costs, superior color rendition, and lower energy consumption.

  5. DOE Publishes GATEWAY Report on High-Mast Lighting at Philadelphia...

    Office of Environmental Management (EM)

    on a trial installation of LED apron lighting at Philadelphia International Airport (PHL). ... An evaluation of an initial trial installation of three LED luminaires was conducted in ...

  6. Technology Fact Sheets | Department of Energy

    Office of Environmental Management (EM)

    SSL Applications Upgrading Troffer Luminaires to LED Provides guidance on the various factors to consider when deciding on an LED upgrade for a fluorescent troffer system. (4 ...

  7. Cree Sets New Benchmarks for LED Efficacy and Brightness

    Broader source: Energy.gov [DOE]

    Cree has successfully created a cool white LED prototype that delivers 107 lm/W at 350mA. This achievement builds on the Cree EZBright® LED chip platform, developed in part with prior funding support from DOE. Cree made the prototype LED under their DOE project focused on developing LED chips incorporating photonic crystal elements for improved light extraction and novel package technology for higher down-conversion efficiency compared to conventional LEDs. Based on a 1 millimeter-square chip, the new prototype LED produces white light with a CCT of 5500K and a CRI of 73. Integration of four of these prototype LEDs can produce luminous flux of more than 450 lumens.

  8. (Expired) Nationwide Limited Public Interest Waiver for LED Lighting and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    HVAC Units: February 11, 2010 | Department of Energy (Expired) Nationwide Limited Public Interest Waiver for LED Lighting and HVAC Units: February 11, 2010 (Expired) Nationwide Limited Public Interest Waiver for LED Lighting and HVAC Units: February 11, 2010 PDF icon nationwide_nonavailability_waiver_02-11-2010 More Documents & Publications Nationwide Categorical Waiver Nationwide Nonavailability Waiver: February 11, 2010 (Please note, the waiver for LED traffic signals has been

  9. Reducing LED Costs Through Innovation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reducing LED Costs Through Innovation Reducing LED Costs Through Innovation November 27, 2013 - 12:00am Addthis Jim Brodrick, Lighting Program Manager A Wisconsin-based company is developing an innovative way to reduce manufacturing costs of light-emitting diodes (LEDs). With help from a $2.4 million Energy Department research grant that is matched dollar-for-dollar by the company, researchers at Eaton Corporation in Menomonee Falls, Wisconsin, are creating a manufacturing process that not only

  10. Color Maintenance of LEDs in Laboratory and Field Applications (Technical

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Report) | SciTech Connect Color Maintenance of LEDs in Laboratory and Field Applications Citation Details In-Document Search Title: Color Maintenance of LEDs in Laboratory and Field Applications Synopsis: To date, consideration for parametric failure of LED products has largely been focused on lumen maintenance. However, color shift is a cause of early failure for some products, and is especially important to consider in certain applications, like museums, where visual appearance is

  11. Energy Department Announces New Investments in University-Led Nuclear

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Innovation | Department of Energy in University-Led Nuclear Energy Innovation Energy Department Announces New Investments in University-Led Nuclear Energy Innovation September 27, 2012 - 11:07am Addthis WASHINGTON - As part of the Obama Administration's all-of-the-above energy strategy to deploy every available source of American energy and ensure the U.S. remains competitive globally, the Energy Department announced today more than $13 million in new investments for university-led

  12. Considering LEDs for Street and Area Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Resources » Videos » Considering LEDs for Street and Area Lighting Considering LEDs for Street and Area Lighting View Jim Brodrick's keynote video from the September 2009 IES Street and Area Lighting Conference in Philadelphia. View the text-alternative version. Solid-State Lighting Home About the Solid-State Lighting Program Research & Development SSL Basics Using LEDs Information Resources Conferences & Meetings Presentations Publications Webcasts Videos Tools

  13. DOE Publishes GATEWAY Report on Successful LED Wall Washer Retrofit |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Successful LED Wall Washer Retrofit DOE Publishes GATEWAY Report on Successful LED Wall Washer Retrofit August 5, 2015 - 1:00pm Addthis The U.S. Department of Energy has released a report on a GATEWAY demonstration, in which maintenance and energy costs were significantly reduced while retaining the quality of light when LED modules replaced 87 halogen lamps in existing wall washers at the University of Maryland's (UMD) Clarice Smith Performing Arts Center. The project

  14. Dimming LEDs: What You Need to Know | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Resources » Webcasts » Dimming LEDs: What You Need to Know Dimming LEDs: What You Need to Know This December 10, 2012 webcast presented information on the challenges and opportunities facing users trying to dim LED light sources today, reviewing the major types of deployed dimming technologies and equipment and some of the factors that lead to performance problems and incompatibilities. Michael Poplawski of Pacific Northwest National Laboratory walked through examples of what can

  15. Reducing LED Costs Through Innovation | Department of Energy

    Energy Savers [EERE]

    LED Costs Through Innovation Reducing LED Costs Through Innovation November 19, 2013 - 3:49pm Addthis A combination solid-state laser turret cutter and stamping machine cuts a thin steel plate that will be formed into lighting fixture housing. Wisconsin-based Eaton Corporation is developing a new manufacturing process that streamlines LED fixture designs. | Photo courtesy of Eaton Corporation A combination solid-state laser turret cutter and stamping machine cuts a thin steel plate that will be

  16. LED Replacements for Linear Fluorescent Lamps Webcast | Department of

    Energy Savers [EERE]

    Energy Replacements for Linear Fluorescent Lamps Webcast LED Replacements for Linear Fluorescent Lamps Webcast In this June 20, 2011 webcast on LED products marketed as replacements for linear fluorescent lamps, Jason Tuenge of the Pacific Northwest National Laboratory (PNNL) discussed current Lighting Facts-listed products as well as products evaluated in the latest CALiPER reports. Eric Richman, also of PNNL, reported on a recently completed GATEWAY demonstration project, in which LED and

  17. LED Street Lighting Conversion Workshop Presentations | Department of

    Energy Savers [EERE]

    Energy Research & Development » Technology Application R&D » Municipal Consortium » News & Events » LED Street Lighting Conversion Workshop Presentations LED Street Lighting Conversion Workshop Presentations This page provides links to the presentations given at the National League of Cities Mobile Workshop, LED Street Lighting Conversion: Saving Your Community Money, While Improving Public Safety, held November 13, 2013, in Seattle, WA. Presentations and Materials State of

  18. LEDs Go Ivy League: Princeton's Dillon Gymnasium | Department of Energy

    Energy Savers [EERE]

    Princeton's Dillon Gymnasium LEDs Go Ivy League: Princeton's Dillon Gymnasium View the video about LED lighting in Dillon Gymnasium, a focal point of sports and recreation at Princeton since 1947. William Evans discusses measurable benefits of LED lighting in the gym and describes the challenges of the installation, which included the need for a custom interface so the lighting controls would operate within in the Lutron Ecosystem

  19. NETL-Led Laboratory-Industry-Academia Collaboration Is Accelerating

    Office of Environmental Management (EM)

    Carbon-Capture Technologies | Department of Energy NETL-Led Laboratory-Industry-Academia Collaboration Is Accelerating Carbon-Capture Technologies NETL-Led Laboratory-Industry-Academia Collaboration Is Accelerating Carbon-Capture Technologies April 2, 2014 - 9:31am Addthis NETL-Led Laboratory-Industry-Academia Collaboration Is Accelerating Carbon-Capture Technologies Check out NETL's latest video on CCSI. In 2011, the Office of Fossil Energy's National Energy Technology Laboratory (NETL)

  20. LEDS Collaboration in Action Workshop Biography | Open Energy...

    Open Energy Info (EERE)

    LEDS Collaboration in Action Workshop Biography Jump to: navigation, search Low Emission Development Strategies Global Partnership Advancing climate-resilient, low-emission...

  1. LEDS Collaboration in Action Workshop Open Space Sessions | Open...

    Open Energy Info (EERE)

    LEDS Collaboration in Action Workshop Open Space Sessions Jump to: navigation, search Low Emission Development Strategies Global Partnership Advancing climate-resilient,...

  2. LEDS Collaboration in Action Workshop Links | Open Energy Information

    Open Energy Info (EERE)

    LEDS Collaboration in Action Workshop Links Jump to: navigation, search Low Emission Development Strategies Global Partnership Advancing climate-resilient, low-emission development...

  3. LEDS Collaboration in Action Workshop Accommodations | Open Energy...

    Open Energy Info (EERE)

    LEDS Collaboration in Action Workshop Accommodations Jump to: navigation, search Low Emission Development Strategies Global Partnership Advancing climate-resilient, low-emission...

  4. LEDS Collaboration in Action Workshop Agenda | Open Energy Information

    Open Energy Info (EERE)

    LEDS Collaboration in Action Workshop Agenda Jump to: navigation, search Low Emission Development Strategies Global Partnership Advancing climate-resilient, low-emission...

  5. LEDS Collaboration in Action Workshop Participant Pack | Open...

    Open Energy Info (EERE)

    LEDS Collaboration in Action Workshop Participant Pack Jump to: navigation, search Low Emission Development Strategies Global Partnership Advancing climate-resilient, low-emission...

  6. Color Maintenance of LEDs in Laboratory and Field Applications...

    Office of Scientific and Technical Information (OSTI)

    Royer, Michael P.; Tuttle, Ralph; Rosenfeld, Scott M.; Miller, Naomi J. Light-emitting diode (LED), color shift, color stability, color maintenance, warranty Light-emitting...

  7. Color Maintenance of LEDs in Laboratory and Field Applications...

    Office of Scientific and Technical Information (OSTI)

    Country of Publication: United States Language: English Subject: LED, ssl, solid-state, lighting, GATEWAY, CALiPER, report, color, shift, maintenance Word Cloud More Like This Full ...

  8. Demonstration Assessment of Light-Emitting Diode (LED) Street...

    Office of Scientific and Technical Information (OSTI)

    Street Lighting Host Site: Lija Loop, Portland, Oregon Citation Details In-Document Search Title: Demonstration Assessment of Light-Emitting Diode (LED) Street Lighting Host Site: ...

  9. Demonstration Assessment of Light-Emitting Diode (LED) Parking...

    Office of Scientific and Technical Information (OSTI)

    Diode (LED) Parking Lot Lighting in Leavenworth, KS This report describes the process and results of a demonstration of solid-state lighting (SSL) technology in a ...

  10. LED Site Lighting in the Commercial Building Sector: Opportunities...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Site Lighting in the Commercial Building Sector: Opportunities, Challenges, and the CBEA Performance Specification LED Site Lighting in the Commercial Building Sector: ...

  11. Nationwide Limited Public Interest Waiver for LED and HVAC Units...

    Broader source: Energy.gov (indexed) [DOE]

    Nationwide Nonavailability Waiver: February 11, 2010 (Please note, the waiver for LED traffic signals has been withdrawn effective December 1, 2010) Nationwide...

  12. IADB/UNDP LEDS Community of Practice | Open Energy Information

    Open Energy Info (EERE)

    to communicate different methods for preparation of LED strategies including: The involvement of sectors and stakeholders Updating GHG inventories Preparation and analysis of...

  13. Secretary Chu Announces Funding for 71 University-Led Nuclear...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Secretary Chu Announces Funding for 71 University-Led Nuclear Research and Development Projects WASHINGTON, DC U.S. Energy Secretary Steven Chu today announced the selection of ...

  14. LED Lighting Facts/CALiPER Snapshot. Outdoor Ambient Lighting

    SciTech Connect (OSTI)

    2013-07-01

    Snapshot reports reveal how today's products really perform, drawing on analysis of verified performance data from the LED Lighting Facts program's online product list.

  15. LEDS Collaboration in Action Workshop Contact Us | Open Energy...

    Open Energy Info (EERE)

    LEDS Collaboration in Action Workshop Contact Us Jump to: navigation, search Low Emission Development Strategies Global Partnership Advancing climate-resilient, low-emission...

  16. High Bandgap Phosphide Approaches for LED Applications - Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A new approach to fabricating high-efficiency Amber LEDs National Renewable Energy Laboratory Contact NREL About This Technology Publications: PDF Document Publication AlInP Green ...

  17. Adopting LED Technology: What Federal Facility Managers Need to Know

    Broader source: Energy.gov [DOE]

    This document describes the presentation slides for the "Adopting LED Technology: What Federal Facility Managers Need to Know" webinar that took place on September 11, 2014.

  18. Study: Environmental Benefits of LEDs Greater Than CFLs | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to date. The study - which evaluated not only the use but also the manufacturing, transport, and disposal of LED, CFL, and incandescent lamps throughout each product...

  19. LED Lights for All Occasions | Department of Energy

    Office of Environmental Management (EM)

    Lights for All Occasions LED Lights for All Occasions November 15, 2012 - 1:15pm Addthis With such a variety of lights available, LEDs are a perfect choice for holiday lighting. | Photo courtesy of ©iStockphoto.com/Birzio With such a variety of lights available, LEDs are a perfect choice for holiday lighting. | Photo courtesy of ©iStockphoto.com/Birzio Elizabeth Spencer Communicator, National Renewable Energy Laboratory What does this mean for me? Energy-efficient LED lights can be used to

  20. Lighting for Health: LEDs in the New Age of Illumination

    SciTech Connect (OSTI)

    2014-05-01

    DOE Solid-State Lighting program technology fact sheet that provides background on current science and considerations related to LED light and health.

  1. Have You Used LED Light Strings? | Department of Energy

    Office of Environmental Management (EM)

    Used LED Light Strings? Have You Used LED Light Strings? December 3, 2009 - 7:30am Addthis This week, you read about LED holiday light strings, which can use 90% less energy than regular incandescent light strings. You may even be able to save on the initial costs with rebates from stores or your utility; check to find out what's being offered in your area. Have you used LED light strings? Tell us what you think of them. Each Thursday, you have the chance to share your thoughts on a question

  2. #AskEnergySaver: LED Lights | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LED Lights #AskEnergySaver: LED Lights April 24, 2014 - 6:00pm Addthis LED lights are six to seven times more energy efficient than conventional incandescent lights, cut energy use by more than 80 percent and can last more than 25 times longer. | Photo courtesy of Dennis Schroeder, NREL. LED lights are six to seven times more energy efficient than conventional incandescent lights, cut energy use by more than 80 percent and can last more than 25 times longer. | Photo courtesy of Dennis Schroeder,

  3. Appraisers Project Plan: Wireless Controls and Retrofit LED Lighting Demonstration

    Broader source: Energy.gov [DOE]

    Appraisers Project Plan: Wireless Controls and Retrofit LED Lighting Demonstration Measurement and Verification Report This report details the measurement and verification tools and methods used to evaluate the effectiveness of wireless lighting controls and LED lighting at the Appraisers Building, a federal office building in San Francisco, CA.

  4. Low Cost Lithography Tool for High Brightness LED Manufacturing

    SciTech Connect (OSTI)

    Andrew Hawryluk; Emily True

    2012-06-30

    The objective of this activity was to address the need for improved manufacturing tools for LEDs. Improvements include lower cost (both capital equipment cost reductions and cost-ofownership reductions), better automation and better yields. To meet the DOE objective of $1- 2/kilolumen, it will be necessary to develop these highly automated manufacturing tools. Lithography is used extensively in the fabrication of high-brightness LEDs, but the tools used to date are not scalable to high-volume manufacturing. This activity addressed the LED lithography process. During R&D and low volume manufacturing, most LED companies use contact-printers. However, several industries have shown that these printers are incompatible with high volume manufacturing and the LED industry needs to evolve to projection steppers. The need for projection lithography tools for LED manufacturing is identified in the Solid State Lighting Manufacturing Roadmap Draft, June 2009. The Roadmap states that Projection tools are needed by 2011. This work will modify a stepper, originally designed for semiconductor manufacturing, for use in LED manufacturing. This work addresses improvements to yield, material handling, automation and throughput for LED manufacturing while reducing the capital equipment cost.

  5. Weatherization and Intergovernmental Program Success Stories...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    energy. Learn more. August 27, 2010 New LED lighting fixtures (right) emit a whiter light than existing high-pressure sodium cobra head streetlights (left) and don't spill...

  6. University of Nevada Las Vegas LED Display Engineering

    SciTech Connect (OSTI)

    2010-08-31

    The primary objective of this part of the project is to develop and implement a method that compensates for the inefficiency of the green LED. The proposed engineering solution which will be the backbone of this project will be to use RGBW combination in every pixel to save energy. Two different RGBW geometrical pixel configurations will be implemented and compared against traditional LED configurations. These configurations will be analyzed for energy efficiency while keeping the quality of the display the same. Cost of the addition of white LEDs to displays along with energy cost savings will be presented and analyzed.

  7. Optimized Phosphors for Warm White LED Light Engines

    SciTech Connect (OSTI)

    Setlur, Anant; Brewster, Megan; Garcia, Florencio; Hill, M. Christine; Lyons, Robert; Murphy, James; Stecher, Tom; Stoklosa, Stan; Weaver, Stan; Happek, Uwe; Aesram, Danny; Deshpande, Anirudha

    2012-07-30

    The objective of this program is to develop phosphor systems and LED light engines that have steady-state LED efficacies (using LEDs with a 60% wall-plug efficiency) of 105–120 lm/W with correlated color temperatures (CCT) ~3000 K, color rendering indices (CRI) >85, <0.003 distance from the blackbody curve (dbb), and <2% loss in phosphor efficiency under high temperature, high humidity conditions. In order to reach these goals, this involves the composition and processing optimization of phosphors previously developed by GE in combination with light engine package modification.

  8. MOF Coating a Promising Path to White LEDs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MOF Coating a Promising Path to White LEDs MOF Coating a Promising Path to White LEDs Print Friday, 27 February 2015 17:11 Hu et al. designed a new yellow phosphor with high quantum yield by immobilizing a preslected chromophore into the rigid framework of a metal-organic framework (MOF); the structure was determined at Beamline 11.3.1. Coating a blue light-emitting diode (LED) with this compound readily generates white light with high luminous efficacy. The new yellow phosphor demonstrates

  9. Wisconsin LED Plant Benefits from Recovery Act | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Stephen Graff Former Writer & editor for Energy Empowers, EERE What does this mean for me? LED lights emit more light, have a longer life and provide anywhere from 50 to 70 percent in energy savings. Rudd Lighting has seen a boost from cities tapping Recovery Act funds and seeking energy efficient lighting that will reduce costs. The BetalLED facility, which produced hundreds of thousands of LED products last year, employs about 600 people, and for every job in the plant, eight to 10 more

  10. EECBG Success Story: LEDs Ready for Takeoff at Louisiana Airport

    Broader source: Energy.gov [DOE]

    About 250 lights along the taxiway at Hammond Northshore Regional Airport in Louisiana are being replaced with light-emitting diodes (LEDs) with funds from an Energy Efficiency and Conservation Block Grant (EECBG). Learn more.

  11. Stage 1: Organizing the LEDS Process | Open Energy Information

    Open Energy Info (EERE)

    public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development...

  12. Identify roles and responsibilities for LEDS process | Open Energy...

    Open Energy Info (EERE)

    public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development...

  13. Text-Alternative Version: LED Color Stability Webinar

    Broader source: Energy.gov [DOE]

    Michael Royer: All right, welcome ladies and gentleman. I'm Michael Royer of Pacific Northwest National Laboratory, and I'd like to welcome you to today's webinar on LED Color Stability, Ten...

  14. LEDS Collaboration in Action Workshop | Open Energy Information

    Open Energy Info (EERE)

    on LEDS globally. The workshop goals were to: Convene low emissions development and low carbon growth decision-makers Promote South-South and North-South collaboration and...

  15. DOE Publishes Fact Sheet on LED Lighting and Health

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy has published a fact sheet that looks at what's known—and not known—about the effects of lighting on human health, with specific reference to LEDs. Entitled Lighting...

  16. Laboratory Evaluation of LED T8 Replacement Lamp Products

    SciTech Connect (OSTI)

    Richman, Eric E.; Kinzey, Bruce R.; Miller, Naomi J.

    2011-05-23

    A report on a lab setting analysis involving LED lamps intended to directly replace T8 fluorescent lamps (4') showing light output, power, and economic comparisons with other fluorescent options.

  17. Demonstration Assessment of Light-Emitting Diode (LED) Accent...

    Office of Scientific and Technical Information (OSTI)

    Accent Lighting at the Field Museum in Chicago, IL Citation Details In-Document Search Title: Demonstration Assessment of Light-Emitting Diode (LED) Accent Lighting at the Field ...

  18. Demonstration Assessment of Light-Emitting Diode (LED) Roadway...

    Office of Scientific and Technical Information (OSTI)

    Roadway Lighting at the I-35W Bridge, Minneapolis, MN Citation Details In-Document Search Title: Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting at the ...

  19. Parking Savings Through LED Project for Iowa City | Department...

    Broader source: Energy.gov (indexed) [DOE]

    grant and rebate from utility. City to save 66,000 annually with energy efficient LED lights in parking garages. Project will reduce energy usage by 1.4 million kWh...

  20. New DOE Report Estimates LED Savings in Common Lighting Applications

    Office of Energy Efficiency and Renewable Energy (EERE)

    The U.S. Department of Energy (DOE) has released its latest report in a series analyzing markets where LEDs compete with traditional lighting sources. The new report, Adoption of Light-Emitting...

  1. Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting

    SciTech Connect (OSTI)

    Kinzey, B. R.; Myer, M. A.

    2009-11-01

    A U.S. Department of Energy Solid-State Lighting Gateway Report on a Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting in Lija Loop, Portland, Oregon.

  2. Advances in Chip Technology, Packaging Enable White LED Breakthroughs

    Broader source: Energy.gov [DOE]

    Significant advances in chip technology have enabled Cree, Inc.'s Santa Barbara Technology Center to demonstrate white LEDs with record efficacies as high as 74 lumens per watt - on par with...

  3. LED Lighting on the National Mall | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    "Using energy-efficient LED light bulbs is an important way Americans can save money by saving energy," said Secretary Chu. "Investing in an American economy that is built to ...

  4. EECBG Success Story: Small Nebraska Town Welcomes LEDs and Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Welcomes LEDs and Energy Savings EECBG Success Story: Small Town Using Wind Power to Offset Electricity Costs EECBG Success Story: Out with the Old, In with the New: New...

  5. Better than CFL? Dimmable LED Downlights in Hospitality Facilities Webinar

    Broader source: Energy.gov [DOE]

    LEDs represent less than 1% of the installed base of U.S. downlights, which in 2012 numbered about 700 million. In hospitality facilities, past efforts to reduce lighting energy use have mainly...

  6. Article Published on LED Lumen Maintenance and Light Loss Factors

    Broader source: Energy.gov [DOE]

    An article has been published in LEUKOS: The Journal of the Illuminating Engineering Society of North America (IES) that may be of interest to the solid-state lighting community. Entitled "Lumen Maintenance and Light Loss Factors: Consequences of Current Design Practices for LEDs," the article was written by Michael Royer of Pacific Northwest National Laboratory and discusses complications related to the lamp lumen depreciation (LLD) light loss factor and LEDs.

  7. Demonstration Assessment of Light-Emitting Diode (LED) Freezer Case

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lighting | Department of Energy Demonstration Assessment of Light-Emitting Diode (LED) Freezer Case Lighting Demonstration Assessment of Light-Emitting Diode (LED) Freezer Case Lighting This document is a report of observations and results obtained from a lighting demonstration project conducted under a U.S. Department of Energy program. The program supports demonstrations of high-performance solid-state lighting (SSL) products in order to develop empirical data and experience with

  8. White LED Benchmark of 65 Lumens Per Watt Achieved

    Broader source: Energy.gov [DOE]

    Novel chip design and the balance of multiple interrelated design parameters have enabled Cree, Inc.'s Santa Barbara Technology Center to demonstrate white LEDs with efficacies greater than 65 lumens per watt at 350 mA. The results are particularly significant because they were achieved with a pre-production prototype chip using the same package used in Cree's commercially available XLamp® 7090 high power LED, rather than a laboratory device.

  9. Color Maintenance of LEDs in Laboratory and Field Applications (Technical

    Office of Scientific and Technical Information (OSTI)

    Report) | SciTech Connect Synopsis: To date, consideration for parametric failure of LED products has largely been focused on lumen maintenance. However, color shift is a cause of early failure for some products, and is especially important to consider in certain applications, like museums, where visual appearance is critical. Example data collected by the GATEWAY program for LED lamps installed in museums shows that many have changed color beyond a reasonable tolerance well before their

  10. Gravitational waves found, black-hole models led the way

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Gravitational waves found, black-hole models led the way Gravitational waves found, black-hole models led the way Gravitational waves were predicted by Einstein's theory of general relativity in 1916, and now, almost exactly 100 years later, the faint ripples across space-time have been found. February 11, 2016 A simulation of two merging black holes, creating gravitational waves. Photo courtesy of LIGO. A simulation of two merging black holes, creating gravitational waves. Photo courtesy of

  11. Municipal Consortium LED Street Lighting Workshop Presentations and

    Energy Savers [EERE]

    Materials-Boston, MA | Department of Energy Boston, MA Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Boston, MA This page provides links to the presentations given at the DOE Municipal Solid-State Street Lighting Consortium Workshop held in Boston August 2-3, 2012. Workshop Agenda DOE Municipal Solid-State Street Lighting Consortium James Brodrick, U.S. Department of Energy Boston's LED Street Lighting Initiative Joanne Massaro, Glenn Cooper, Matthew Mayrl,

  12. Next-Generation LED Package Architectures Enabled by Thermally Conductive

    Energy Savers [EERE]

    Transparent Encapsulants | Department of Energy LED Package Architectures Enabled by Thermally Conductive Transparent Encapsulants Next-Generation LED Package Architectures Enabled by Thermally Conductive Transparent Encapsulants Lead Performer: Momentive Performance Materials Quartz, Inc. DOE Total Funding: $1,497,255 Cost Share: $512,700 Project Term: 10/1/2014 - 3/31/2016 Funding Opportunity: SSL R&D Funding Opportunity Announcement (FOA) (DE-FOA-0000973) Project Objective This

  13. Keeping Pace with LED Lighting Trends | Department of Energy

    Energy Savers [EERE]

    Keeping Pace with LED Lighting Trends Keeping Pace with LED Lighting Trends October 23, 2013 - 10:41am Addthis This year's SSL Market Introduction Workshop will take place in Portland, Oregon. | Photo courtesy of Travel Portland This year's SSL Market Introduction Workshop will take place in Portland, Oregon. | Photo courtesy of Travel Portland Jim Brodrick Jim Brodrick Lighting Program Manager Rapid advances in solid-state lighting (SSL) technology are reducing the cost, improving the

  14. Lighting Retrofit Improving Visibility, Saving Energy | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Retrofit Improving Visibility, Saving Energy Lighting Retrofit Improving Visibility, Saving Energy August 27, 2010 - 10:05am Addthis New LED lighting fixtures (right) emit a whiter light than existing high-pressure sodium cobra head streetlights (left) and don't spill light onto nearby houses. | Photos courtesy of the City of Muscatine New LED lighting fixtures (right) emit a whiter light than existing high-pressure sodium cobra head streetlights (left) and don't spill light onto

  15. New Rules Help Pocahontas Brighten Streets | Department of Energy

    Office of Environmental Management (EM)

    Rules Help Pocahontas Brighten Streets New Rules Help Pocahontas Brighten Streets October 21, 2010 - 10:00am Addthis The City of Pocahontas, Iowa swill replace sodium streetlights with LED fixtures. | File photo The City of Pocahontas, Iowa swill replace sodium streetlights with LED fixtures. | File photo Maya Payne Smart Former Writer for Energy Empowers, EERE What are the key facts? Pocahontas, Iowa was awarded a Recovery Act grant of more than $81,000. The city will replace 266 high-pressure

  16. Lifetime and Reliability | Department of Energy

    Energy Savers [EERE]

    Lifetime and Reliability Lifetime and Reliability A DOE Solid-State Lighting Program technology fact sheet on lifetime, reliability, and failure as related to LED-based products. PDF icon life-reliability_fact-sheet.pdf More Documents & Publications LED LUMINAIRE LIFETIME: Recommendations for Testing and Reporting LED Luminaire Lifetime: Recommendations For Testing and Reporting System Reliability Model for Solid-State Lighting Luminaires

  17. Highly Efficient Small Form Factor LED Retrofit Lamp

    SciTech Connect (OSTI)

    Steven Allen; Fred Palmer; Ming Li

    2011-09-11

    This report summarizes work to develop a high efficiency LED-based MR16 lamp downlight at OSRAM SYLVANIA under US Department of Energy contract DE-EE0000611. A new multichip LED package, electronic driver, and reflector optic were developed for these lamps. At steady-state, the lamp luminous flux was 409 lumens (lm), luminous efficacy of 87 lumens per watt (LPW), CRI (Ra) of 87, and R9 of 85 at a correlated color temperature (CCT) of 3285K. The LED alone achieved 120 lumens per watt efficacy and 600 lumen flux output at 25 C. The driver had 90% electrical conversion efficiency while maintaining excellent power quality with power factor >0.90 at a power of only 5 watts. Compared to similar existing MR16 lamps using LED sources, these lamps had much higher efficacy and color quality. The objective of this work was to demonstrate a LED-based MR16 retrofit lamp for replacement of 35W halogen MR16 lamps having (1) luminous flux of 500 lumens, (2) luminous efficacy of 100 lumens per watt, (3) beam angle less than 40{sup o} and center beam candlepower of at least 1000 candelas, and (4) excellent color quality.

  18. LED Lighting: Applying Lessons Learned from the CFL Experience

    SciTech Connect (OSTI)

    McCullough, Jeffrey J.; Gilbride, Theresa L.; Gordon, Kelly L.; Ledbetter, Marc R.; Sandahl, Linda J.; Ton, My K.

    2008-08-20

    Light emitting diode (LED) technology has emerged as an exciting new lighting alternative with the potential for significant energy savings. There is concern, however, that white light LEDs for general illumination could take a long, bumpy course similar to another energy-efficient lighting technology – compact fluorescent lights (CFLs). Recognizing the significant potential energy-efficient lighting has to reduce U.S. energy consumption, Congress mandated in the Energy Policy Act of 2005 that the U.S. Department of Energy (DOE) develop Solid State Lighting (SSL) through a Next Generation Lighting Initiative. DOE’s first step was to analyze the market introduction of compact fluorescent lighting to determine what lessons could be learned to smooth the introduction of SSL in the United States (Sandahl et al. 2006). This paper summarizes applicable lessons learned from the market introduction of CFLs and describe how DOE and others are applying those lessons to speed the development and market introduction of energy-efficient LED lighting for general illumination applications. A description of the current state of LED technology and compares LEDs to incandescent, fluorescent, and halogen lights is also provided.

  19. Purchasing Energy-Efficient Suspended Fluorescent Luminaires...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    with linear fluorescent lamps that are used in commercial and institutional buildings. ... lease agreements; acquisitions made using purchase cards; and solicitations for offers. ...

  20. Covered Product Category: Suspended Fluorescent Luminaires |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    product is available to meet the functional requirements, or that no such product is life cycle cost effective for the specific application. Design and Installation Tips:...

  1. High-Performance OLED Panel and Luminaire

    Broader source: Energy.gov [DOE]

    Lead Performer: OLEDWorks, LLC – Rochester, NYPartners: Acuity Brands Lighting – Berkeley, CADOE Total Funding: $1,376,999Cost Share: $458,999Project Term: 10/1/2014 - 3/31/2016Funding Opportunity:...

  2. Tests gauge LED sensors for fuel-dye measurements

    SciTech Connect (OSTI)

    Ozanich, Richard M.; Lucke, Richard B.; Melville, Angela M.; Wright, Bob W.

    2009-10-19

    The goal of this work was to develop a low cost, robust sensor to allow direct measurement of Solvent Red 164 dye concentration in off-road fuel at refineries and fuel terminals. Optical absorption sensors based on light emitting diodes (LEDs) are rugged, low-cost, have low power consumption, and can be designed to be intrinsically safe.LED-based systems have been used in a variety of chemical detection applications including heavy metals, pH, CO2, and O2. The approach for this work was to develop a sensor that could be mounted on a pipeline sight glass, precluding the need for direct contact of the sensor with the fuel. Below is described the design and testing of three different LED/photodiode sensors utilizing reflectance spectrometry for the measurement of dye concentration.

  3. Save Money with LED Holiday Light Strings | Department of Energy

    Energy Savers [EERE]

    Money with LED Holiday Light Strings Save Money with LED Holiday Light Strings December 1, 2009 - 11:19am Addthis Allison Casey Senior Communicator, NREL It's hard to believe, but the holidays are in full swing and many of you are starting to decorate your homes. Those of you who started around Halloween are probably feeling pretty smart because you got your decorating done while the weather was nice. I see you there, snacking on your Thanksgiving leftovers, laughing at me shivering in the cold

  4. LED Holiday Lights: Festive, Safe, and Efficient! | Department of Energy

    Office of Environmental Management (EM)

    LED Holiday Lights: Festive, Safe, and Efficient! LED Holiday Lights: Festive, Safe, and Efficient! December 2, 2010 - 4:34pm Addthis Andy Oare Andy Oare Former New Media Strategist, Office of Public Affairs Ed. Note cross posted from the Energy Savers Blog. Written by Allison Casey This week brings a day that many people look forward to all year -- and I'm not talking about Thanksgiving, or Black Friday. I'm talking about that magical day when it's finally okay to drag the dusty boxes from the

  5. LED Holiday Lights: Festive, Safe, and Efficient! | Department of Energy

    Office of Environmental Management (EM)

    LED Holiday Lights: Festive, Safe, and Efficient! LED Holiday Lights: Festive, Safe, and Efficient! November 23, 2010 - 6:30am Addthis Allison Casey Senior Communicator, NREL This week brings a day that many people look forward to all year-and I'm not talking about Thanksgiving, or Black Friday. I'm talking about that magical day when it's finally okay to drag the dusty boxes from the basement or attic, to lovingly sort and display your decorations, to untangle your light strings and set up the

  6. DOE SSL Postings, December 8, 2015, issue

    Energy Savers [EERE]

    and light pollution and increasing safety. After reviewing many alternative products and approaches, PHL selected an LED luminaire for a trial installation in the apron area at...

  7. DOE Announces Selections from Solid-State Lighting Product Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    market application with fully defined price, efficacy, and other performance ... Recipient: Color Kinetics Incorporated Title: An Integrated Solid-State LED Luminaire for ...

  8. Promising Technology: High Bay Light-Emitting Diodes

    Broader source: Energy.gov [DOE]

    High bay LEDs offer several advantages over conventional high intensity discharge (HID) luminaires including longer lifetimes, reduced maintenance costs, and lower energy consumption.

  9. DOE Publishes GATEWAY Report on Exterior Lighting at Princeton...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and day to replace 252 metal halide parking garage luminaires that only operated after dark showed that the inherent controllability of LEDs provides opportunities for multiple...

  10. Small Nebraska Town Welcomes LEDs and Energy Savings

    Broader source: Energy.gov [DOE]

    Tecumseh’s town historic town square is home to the city hall, courthouse, post office, and during the summer months—a farmers market. Now, this historic square, built in the 1850’s, is about to become home to something new: LED lights.

  11. Ultratech Develops an Improved Lithography Tool for LED Wafer Manufacturing

    Broader source: Energy.gov [DOE]

    Ultratech modified an existing lithography tool used for semiconductor manufacturing to better meet the cost and performance targets of the high-brightness LED manufacturing industry. The goal was to make the equipment compatible with the wide range of substrate diameters and thicknesses prevalent in the industry while reducing the capital cost and the overall cost of ownership (COO).

  12. EM-Led Radiological Incident Response Program Receives Honors

    Broader source: Energy.gov [DOE]

    A program led by EM’s Carlsbad Field Office (CBFO) that coordinates analytical capabilities throughout DOE for response to potential national radiological incidents recently received recognition for the best-in-track poster at a waste management conference earlier this year.

  13. 130 LPW 1000 Lm Warm White LED for Illumination

    SciTech Connect (OSTI)

    Soer, Wouter

    2012-06-14

    An illumination-grade warm-white LED, having correlated color temperature (CCT) between 2700 and 3500 K and capable of producing 1000 lm output at over 130 lm/W at room temperature, has been developed in this program. The high-power warm-white LED is an ideal source for use in indoor and outdoor lighting applications. Over the two year period, we have made the following accomplishments: • Developed a low-cost high-power white LED package and commercialized a series of products with CCT ranging from 2700 to 5700 K under the product name LUXEON M; • Demonstrated a record efficacy of 124.8 lm/W at a flux of 1023 lm, CCT of 3435 K and color rendering index (CRI) over 80 at room temperature in the productized package; • Demonstrated a record efficacy of 133.1 lm/W at a flux of 1015 lm, CCT of 3475 K and CRI over 80 at room temperature in an R&D package. The new high-power LED package is a die-on-ceramic surface mountable LED package. It has four 2 mm2 InGaN pump dice, flip-chip attached to a ceramic submount in a 2x2 array configuration. The submount design utilizes a design approach that combines a high-thermal- conductivity ceramic core for die attach and a low-cost and low-thermal-conductivity ceramic frame for mechanical support and as optical lens carrier. The LED package has a thermal resistance of less than 1.25 K/W. The white LED fabrication also adopts a new batch level (instead of die-by-die) phosphor deposition process with precision layer thickness and composition control, which provides not only tight color control, but also low cost. The efficacy performance goal was achieved through the progress in following key areas: (1) high-efficiency royal blue pump LED development through active region design and epitaxial growth quality improvement (funded by internal programs); (2) improvement in extraction efficiency from the LED package through improvement of InGaN-die-level and package-level optical extraction efficiency; and (3) improvement in phosphor system efficiency by improving the lumen equivalent (LE) and phosphor package efficiency (PPE) through improvement in phosphor-package interactions. The high-power warm-white LED product developed has been proven to have good reliability through extensive reliability tests. The new kilo-lumen package has been commercialized under the product name LUXEON M. As of the end of the program, the LUXEON M product has been released in the following CCT/CRI combinations: 3000K/70, 4000K/70, 5000K/70, 5700K/70, 2700K/80, 3000K/80 and 4000K/80. LM-80 tests for the products with CCTs of 4000 K and higher have reached 8500 hours, and per IESNA TM-21-11 have established an L70 lumen maintenance value of >51,000 hours at A drive current and up to 120 °C board temperature.

  14. OSRAM SYLVANIA Develops High-Efficiency LED Troffer Replacement

    Broader source: Energy.gov [DOE]

    With the help of DOE funding, OSRAM SYLVANIA is developing a high-efficiency LED 2'x2' troffer replacement that is expected to be commercially available in the spring of 2012 and to be cost-competitive with existing troffers of that size. It is projected to have a light output of up to 4,000 lumens, an efficacy of more than 100 lm/W, and a CCT of 3500K.

  15. Solid State Lighting LED Product Development and Manufacturing Roundtable Summary

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    October 8, 2014 Washington, D.C. Prepared For: U.S. Department of Energy Prepared By: LED Lighting Advisors Navigant Consulting, Inc. SB Consulting SSLS, Inc. December 8, 2014 i DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government, nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any warranty, express or implied, or assumes

  16. KLA-Tencor's Inspection Tool Reduces LED Manufacturing Costs

    Broader source: Energy.gov [DOE]

    With the help of DOE funding, KLA-Tencor is developing an improved inspection tool for LED manufacturing that promises to significantly increase overall process yields and minimize expensive waste. The power of the inspection tool lies in optical detection techniques coupled with defect source analysis software to statistically correlate front-end geometric anomalies in the substrate to killer defects on the back end of the manufacturing line, which give rise to an undesirable or unusable end product.

  17. Department of Defense led Institutes for Manufacturing Innovation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Adele Ratcliff Director, DoD Manufacturing Technology Program DOE and DOD Multi-topic Workshop Fort Worth, TX October 8 and 9, 2014 0 Department of Defense led Institutes for Manufacturing Innovation OSD Manufacturing Technology Office October 08, 2014 1 Creating an Innovation Ecosystem * A CEO: "can't predict when or where innovation happens." But - we do know key characteristics: * Close proximity is key * Design, make, learn cycle - must be quick * Ecosystem needs all aspects of

  18. Municipal Consortium LED Street Lighting Workshop Presentations and

    Energy Savers [EERE]

    Materials-Los Angeles, CA | Department of Energy Los Angeles, CA Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA This page provides links to the presentations given at the DOE Municipal Solid-State Street Lighting Consortium Workshop held in Los Angeles April 19-20, 2012. Presentations and Materials Workshop Agenda City of Los Angeles: Changing Our Glow for Efficiency Ed Ebrahimian, City of Los Angeles Bureau of Street Lighting L.M. Seventynine:

  19. Webcast: Evaluating LED Street Lighting Solutions | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    In this July 20, 2010 webcast, Edward Smalley of Seattle City Light provided an update on DOE Municipal Solid-State Street Lighting Consortium activities. The webcast also presented perspectives from members who are involved with implementing LED street lighting evaluations, including Tod Rosinbum of the City of Portland, Oregon, John Walter of National Grid, and Amy Olay of the City of San Jose, California. View presentation slides Introduction (PDF 984 KB) Edward Smalley, DOE Municipal

  20. Report 22.1: Photoelectric Performance of LED MR16 Lamps | Department of

    Energy Savers [EERE]

    Energy 2.1: Photoelectric Performance of LED MR16 Lamps Report 22.1: Photoelectric Performance of LED MR16 Lamps PDF icon caliper_22-1_mr16.pdf More Documents & Publications LED MR16 Lamps Caliper Retail Lamps Study 3.1: Dimming, Flicker, and Power Quality Characteristics of LED A Lamps LED Directional

  1. CALiPER Report 21.1. Linear (T8) Lamps in a 2x4 K12-Lensed Troffer

    SciTech Connect (OSTI)

    2014-04-01

    This report focuses on the performance of the same 31 linear LED lamps operated in a typical troffer with a K12 prismatic lens. In general, luminaire efficacy is strongly dictated by lamp efficacy, but the optical system of the luminaire substantially reduces the differences between the luminous intensity distributions of the lamps. While the distributions in the luminaire are similar, the differences remain large enough that workplane illuminance uniformity may be reduced if linear LED lamps with a narrow distribution are used. At the same time, linear LED lamps with a narrower distribution result in slightly higher luminaire efficiency.

  2. Application Summary Report 22: LED MR16 Lamps

    SciTech Connect (OSTI)

    Royer, Michael P.

    2014-07-23

    This report analyzes the independently tested photometric performance of 27 LED MR16 lamps. It describes initial performance based on light output, efficacy, distribution, color quality, electrical characteristics, and form factor, with comparisons to a selection of benchmark halogen MR16s and ENERGY STAR qualification thresholds. Three types of products were targeted. First, CALiPER sought 3000 K lamps with the highest rated lumen output (i.e., at least 500 lm) or a claim of equivalency to a 50 W halogen MR16 or higher. The test results indicate that while the initial performance of LED MR16s has improved across the board, market-available products still do not produce the lumen output and center beam intensity of typical 50 W halogen MR16 lamps. In fact, most of the 18 lamps in this category had lower lumen output and center beam intensity than a typical 35 W halogen MR16 lamp. Second, CALiPER sought lamps with a CRI of 90 or greater. Only four manufacturers were identified with a product in this category. CALiPER testing confirmed the performance of these lamps, which are a good option for applications where high color fidelity is needed. A vast majority of the LED MR16 lamps have a CRI in the low 80s; this is generally acceptable for ambient lighting, but may not always be acceptable for focal lighting. For typical LED packages, there is a fundamental tradeoff between CRI and efficacy, but the lamps in the high-CRI group in this report still offer comparable performance to the rest of the Series 22 products in other performance areas. Finally, CALiPER sought lamps with a narrow distribution, denoted as a beam angle less than 15°. Five such lamps were purchased. Notably, no lamp was identified as having high lumen output (500 lumens or greater), high CRI (90 or greater), a narrow distribution (15° or less), and an efficacy greater than 60 lm/W. This would be an important achievement for LED MR16s especially if output could reach approximately 700 800 lumens, or the approximate equivalent of a 50 W halogen MR16 lamp. Many factors beyond photometric performance should be considered during specification. For example, performance over time, transformer and dimmer compatibility, and total system performance are all critical to a successful installation. Subsequent CALiPER reports will investigate more complex issues.

  3. LED Lighting Facts® Program Supports Accuracy in SSL Product Information

    SciTech Connect (OSTI)

    2013-09-30

    Fact sheet that provides a summary of LED Lighting Facts, a program to assure that LED lighting is accurately represented in the marketplace, illustrated by the LED Lighting Facts label to disclose product performance data.

  4. High Efficacy Green LEDs by Polarization Controlled MOVPE

    SciTech Connect (OSTI)

    Wetzel, Christian

    2013-03-31

    Amazing performance in GaInN/GaN based LEDs has become possible by advanced epitaxial growth on a wide variety of substrates over the last decade. An immediate push towards product development and worldwide competition for market share have effectively reduced production cost and generated substantial primary energy savings on a worldwide scale. At all times of the development, this economic pressure forced very fundamental decisions that would shape huge industrial investment. One of those major aspects is the choice of epitaxial growth substrate. The natural questions are to what extend a decision for a certain substrate will limit the ultimate performance and to what extent, the choice of a currently more expensive substrate such as native GaN could overcome any of the remaining performance limitations. Therefore, this project has set out to explore what performance characteristic could be achieved under the utilization of bulk GaN substrate. Our work was guided by the hypotheses that line defects such as threading dislocations in the active region should be avoided and the huge piezoelectric polarization needs to be attenuated if not turned off for higher performing LEDs, particularly in the longer wavelength green and deep green portions of the visible spectrum. At their relatively lower performance level, deep green LEDs are a stronger indicator of relative performance improvements and seem particular sensitive to the challenges at hand. The project therefore made use of recently developed non-polar and semipolar bulk GaN substrates that were made available at Kyma Technologies by crystallographic cuts from thick polar growth of GaN. This approach naturally leads to rather small pieces of substrates, cm along the long side while mm along the short one. Small size and limited volume of sample material therefore set the limits of the ensuing development work. During the course of the project we achieved green and deep green LEDs in all those crystal growth orientations: polar c-plane, non- polar a-plane, non-polar m-plane, and semipolar planes. The active region in those structures shows dramatically reduced densities of threading dislocations unless the wavelength was extended as far as 510 nm and beyond. With the appearance of such defects, the light output power dropped precipitously supporting the necessity to avoid any and all of such defects to reach the active region. Further aspects of the non-polar growth orientation proved extremely promising for the development of such structures. Chief among them is our success to achieve extremely uniform quantum wells in these various crystal orientations that prove devoid of any alloy fluctuation beyond the theoretical limit of a binominal distribution. This became very Rensselaer Wetzel DE?EE0000627 3 directly apparent in highly advanced atom probe tomography performed in collaboration at Northwestern University. Furthermore, under reduced or absence of piezoelectric polarization, green emitters in those growth geometries exhibit an unsurpassed wavelength stability over very wide excitation and drive current ranges. Such a performance had not been possible in any polar c-plane growth and now places green LEDs in terms of wavelength stability up par with typical 450 nm blue emitters. The project also incorporated enabling opportunities in the development of micro and nano- patterned substrate technologies. Originally developped as a means to enhance generated light extraction we have demonstrated that the method of nano-patterning, in contrast to micro- patterning also results in a substantial reduction of threading dislocation generation. In green LEDs, we thereby see equal contributions of enhanced light extraction and reduced defect generation to a threefold enhancement of the green light output power. These results have opened entirely new approaches for future rapid and low cost epitaxial material development by avoidance of thick defect accommodation layers. All methods developed within this project have meanwhile widely been publicized by the members o

  5. Feedback-Controlled LED Photobioreactor for Photophysiological Studies of Cyanobacteria

    SciTech Connect (OSTI)

    Melnicki, Matthew R.; Pinchuk, Grigoriy E.; Hill, Eric A.; Kucek, Leo A.; Stolyar, Sergey; Fredrickson, Jim K.; Konopka, Allan; Beliaev, Alex S.

    2013-04-09

    A custom photobioreactor (PBR) was designed to enable automatic light adjustments using computerized feedback control. A black anodized aluminum enclosure, constructed to surround the borosilicate reactor vessel, prevents the transmission of ambient light and serves as a mount for arrays of light-emitting diodes (LEDs). The high-output LEDs provide narrow-band light of either 630 or 680 nm for preferential excitation of the cyanobacterial light-harvesting pigments, phycobilin or chlorophyll a, respectively. Custom developed software BioLume provides automatic control of optical properties and a computer feedback loop can automatically adjust the incident irradiance as necessary to maintain a fixed transmitted light through the culture, based on user-determined set points. This feedback control serves to compensate for culture dynamics which have optical effects, (e.g., changing cell density, pigment adaptations) and thus can determine the appropriate light conditions for physiological comparisons or to cultivate light-sensitive strains, without prior analyses. The LED PBR may also be controlled as a turbidostat, using a feedback loop to continuously adjust the rate of media-dilution based on the transmitted light measurements, with a fast and precise response. This cultivation system gains further merit as a high-performance analytical device, using non-invasive tools (e.g., dissolved gas sensors, online mass spectrometry) to automate real-time measurements, thus permitting unsupervised experiments to search for optimal growth conditions, to monitor physiological responses to perturbations, as well as to quantitate photophysiological parameters using an in situ light-saturation response routine.

  6. Use of Occupancy Sensors in LED Parking Lot and Garage Applications...

    Office of Scientific and Technical Information (OSTI)

    Experiences Kinzey, Bruce R.; Myer, Michael; Royer, Michael P.; Sullivan, Greg P. LED lighting; parking lot lighting; occupancy sensors LED lighting; parking lot lighting;...

  7. Shenzhen Bang Bell Electronics Co Ltd BBE LED | Open Energy Informatio...

    Open Energy Info (EERE)

    Bang Bell Electronics Co Ltd BBE LED Jump to: navigation, search Name: Shenzhen Bang-Bell Electronics Co Ltd (BBE LED) Place: Shenzhen, Guangdong Province, China Zip: 518110...

  8. Secretary Chu Announces $38 Million for 42 University-Led Nuclear...

    Office of Environmental Management (EM)

    8 Million for 42 University-Led Nuclear Research and Development Projects Secretary Chu Announces 38 Million for 42 University-Led Nuclear Research and Development Projects May ...

  9. LED Site Lighting in the Commercial Building Sector: Opportunities, Challenges, and the CBEA Performance Specification

    Broader source: Energy.gov [DOE]

    This March 26, 2009 webcast presented information about the Commercial Building Energy Alliances' (CBEA) efforts to explore the viability of LED site lighting in commercial parking lots. LED...

  10. 2009 Voluntary Protection Programs Participants' Association (VPPPA) Presentaton: Employee Led Safety Committees

    Broader source: Energy.gov [DOE]

    2009 Voluntary Protection Programs Participants' Association (VPPPA) Presentaton: Employee Led Safety Committees

  11. Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting

    Office of Scientific and Technical Information (OSTI)

    Products Part 2: LED Manufacturing and Performance (Technical Report) | SciTech Connect Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products Part 2: LED Manufacturing and Performance Citation Details In-Document Search Title: Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products Part 2: LED Manufacturing and Performance Part 2 of the project (this report) uses the conclusions from Part 1 as a point of departure to focus on two

  12. Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting

    Office of Scientific and Technical Information (OSTI)

    Products, Part 3: LED Environmental Testing (Technical Report) | SciTech Connect Technical Report: Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products, Part 3: LED Environmental Testing Citation Details In-Document Search Title: Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products, Part 3: LED Environmental Testing This report covers the third part of a larger U.S. Department of Energy (DOE) project to assess the life-cycle

  13. Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting

    Office of Scientific and Technical Information (OSTI)

    Products, Part 3: LED Environmental Testing (Technical Report) | SciTech Connect Technical Report: Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products, Part 3: LED Environmental Testing Citation Details In-Document Search Title: Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products, Part 3: LED Environmental Testing × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's

  14. Report 20.3: Stress Testing of LED PAR38 Lamps | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0.3: Stress Testing of LED PAR38 Lamps Report 20.3: Stress Testing of LED PAR38 Lamps PDF icon Report 20.3: Stress Testing of LED PAR38 Lamps More Documents & Publications Report 20.4: Lumen and Chromaticity Maintenance of LED PAR38 Lamps Retail Lamps Study 3.2: Lumen and Chromaticity Maintenance of LED A Lamps Operated in Steady-State Conditions February 2015 Postings

  15. Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Products Part 2: LED Manufacturing and Performance (Technical Report) | SciTech Connect Technical Report: Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products Part 2: LED Manufacturing and Performance Citation Details In-Document Search Title: Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products Part 2: LED Manufacturing and Performance Part 2 of the project (this report) uses the conclusions from Part 1 as a point of departure to

  16. Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Products, Part 3: LED Environmental Testing (Technical Report) | SciTech Connect Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products, Part 3: LED Environmental Testing Citation Details In-Document Search Title: Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products, Part 3: LED Environmental Testing This report covers the third part of a larger U.S. Department of Energy (DOE) project to assess the life-cycle environmental and

  17. NGL Downlight Demonstration Project: Alston & Bird, LLP, Law Offices |

    Energy Savers [EERE]

    Department of Energy NGL Downlight Demonstration Project: Alston & Bird, LLP, Law Offices NGL Downlight Demonstration Project: Alston & Bird, LLP, Law Offices As of 2012, the U.S. Department of Energy (DOE) estimates 700 million downlight luminaires were installed in residential and commercial buildings; light-emitting diode (LED) luminaires represent less than 1% of this installed base. Downlight luminaires using conventional incandescent, halogen, and compact fluorescent lamps have

  18. Zimbabwe-Terms of Reference for Future LEDS | Open Energy Information

    Open Energy Info (EERE)

    (Redirected from CDKN-Zimbabwe-Terms of Reference for Future LEDS) Jump to: navigation, search Name Zimbabwe-Terms of Reference for Future LEDS AgencyCompany Organization Climate...

  19. DOE Publishes CALiPER Snapshot Report on LED A Lamps

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE's CALiPER program has released a Snapshot Report on LED A lamps, which utilizes the LED Lighting Facts program's extensive product database to help industry stakeholders understand the current state and trajectory of the market for that class

  20. File:(2010)2 full paper with cover LEDS FINAL (2).pdf | Open...

    Open Energy Info (EERE)

    (2010)2 full paper with cover LEDS FINAL (2).pdf Jump to: navigation, search File File history File usage File:(2010)2 full paper with cover LEDS FINAL (2).pdf Size of this...

  1. DOE Publishes Technical Brief Clarifying Misconceptions about Safety of LED Lighting

    Broader source: Energy.gov [DOE]

    The spectral emission of LEDs is a frequent subject of concern, so to set the record straight, the U.S. Department of Energy has published a technical brief entitled True Colors: LEDs and the...

  2. DOE Publishes CALiPER Snapshot Report on LED Outdoor Area Lighting

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy’s CALiPER program has released a Snapshot Report on LED outdoor area lighting. Based on LED Lighting Facts® data through the second quarter of 2014, the report focuses...

  3. Mexico-EC-LEDS in the Agriculture Sector | Open Energy Information

    Open Energy Info (EERE)

    EC-LEDS in the Agriculture Sector Jump to: navigation, search Name Mexico-EC-LEDS in the Agriculture Sector AgencyCompany Organization United States Department of Agriculture,...

  4. Text-Alternative Version: CALiPER Series 21 on LED Linear Lamps...

    Energy Savers [EERE]

    Information Resources Videos Text-Alternative Version: CALiPER Series 21 on LED Linear Lamps and Troffer Lighting Text-Alternative Version: CALiPER Series 21 on LED Linear ...

  5. DOE Publishes CALiPER Report on Chromaticity Shift Modes of LED...

    Office of Environmental Management (EM)

    CALiPER Report on Chromaticity Shift Modes of LED PAR38 Lamps DOE Publishes CALiPER Report on Chromaticity Shift Modes of LED PAR38 Lamps March 23, 2016 - 11:33am Addthis The U.S. ...

  6. Team led by PPPL's Chang receives DOE 2015 INCITE award totaling...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Team led by PPPL's Chang receives DOE 2015 INCITE award totaling 270 million core hours to ... Center for Edge Physics Simulation (EPSI), led by C.S. Chang, a physicist at the U.S. ...

  7. Improved InGaN LED System Efficacy and Cost via Droop Reduction...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Improved InGaN LED System Efficacy and Cost via Droop Reduction Improved InGaN LED System Efficacy and Cost via Droop Reduction Lead Performer: Lumileds, LLC - San Jose, CA DOE ...

  8. DOE Publishes CALiPER Snapshot Report on LED MR16 Lamps | Department...

    Energy Savers [EERE]

    Snapshot Report on LED MR16 Lamps DOE Publishes CALiPER Snapshot Report on LED MR16 Lamps March 5, 2014 - 4:23pm Addthis The U.S. Department of Energy's CALiPER program has ...

  9. Hydrogen Storage Lab PI Workshop: HyMARC and NREL-Led Characterization...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lab PI Workshop: HyMARC and NREL-Led Characterization Effort Hydrogen Storage Lab PI Workshop: HyMARC and NREL-Led Characterization Effort The National Renewable Energy Laboratory ...

  10. Report 20.5: Chromaticity Shift Modes of LED PAR38 Lamps Operated...

    Energy Savers [EERE]

    5: Chromaticity Shift Modes of LED PAR38 Lamps Operated in Steady-State Conditions Report 20.5: Chromaticity Shift Modes of LED PAR38 Lamps Operated in Steady-State Conditions PDF ...

  11. Secretary Chu Announces $38 Million for 42 University-Led Nuclear...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    42 University-Led Nuclear Research and Development Projects Washington, D.C. - U.S. Secretary of Energy Steven Chu today announced the selection of 42 university-led research and ...

  12. Unique PPPL-led workshop assesses research crucial to the success...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Unique PPPL-led workshop assesses research crucial to the success of ITER By John ... The PPPL-led workshop brought together some 35 theorists and experimentalists from the ...

  13. Webinar: The L Prize-Winning LED A19 Replacement-What Commercial...

    Energy Savers [EERE]

    The L Prize-Winning LED A19 Replacement-What Commercial Building OwnersOperators Can Expect in 2012 Webinar: The L Prize-Winning LED A19 Replacement-What Commercial Building ...

  14. DOE Publishes GATEWAY Report on High-Luminous-Flux LED Lighting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High-Luminous-Flux LED Lighting in a High-Temperature Environment DOE Publishes GATEWAY Report on High-Luminous-Flux LED Lighting in a High-Temperature Environment December 17, ...

  15. How City-Led Efficiency Efforts Can Support State Climate and...

    Energy Savers [EERE]

    City-Led Efficiency Efforts Can Support State Climate and Energy Planning How City-Led Efficiency Efforts Can Support State Climate and Energy Planning Provides states and their ...

  16. Two PPPL-led teams win increased supercomputing time to study...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Two PPPL-led teams win increased supercomputing time to study conditions inside fusion ... Researchers led by scientists at the U.S. Department of Energy's (DOE) Princeton Plasma ...

  17. Intel Led OpenMP Training Session at NERSC This Wednesday March...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Led OpenMP Training Session at NERSC This Wednesday March 25 Intel Led OpenMP Training Session at NERSC This Wednesday March 25 March 24, 2015 by Katie Antypas This Wednesday, ...

  18. Sandia-Developed LED Pulser Delivers Laser-Like Performance at...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LED Pulser Delivers Laser-Like Performance at Fraction of the Cost - Sandia Energy Energy ... Twitter Google + Vimeo GovDelivery SlideShare Sandia-Developed LED Pulser Delivers ...

  19. DOE ARM SP2 Deployment at Boston College_Aerodyne led Coated...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SP2 Deployment at Boston College-Aerodyne- Led Coated Black Carbon Study (BC4) Final ... DOESC-ARM-15-068 SP2 Deployment at Boston College- Aerodyne-Led Coated Black Carbon Study ...

  20. PPPL-led researchers seek to demonstrate a novel design for a...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PPPL-led researchers seek to demonstrate a novel design for a key diagnostic tool for ITER ... Researchers at DIII-D will be led by UCLA in testing the monostatic prototype on the ...

  1. Los Alamos-led consortium works to enhance fuel cell technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Los Alamos-led consortium works to enhance fuel cell technology Los Alamos-led consortium works to enhance fuel cell technology Los Alamos National Laboratory is leading a ...

  2. DOE Publishes Revised Report on Dimming LEDs with Phase-Cut Dimmers

    Broader source: Energy.gov [DOE]

    DOE has revised its October 2013 report, Dimming LEDs with Phase-Cut Dimmers: The Specifier's Process for Maximizing Success, to include updated information about the installation of LED lighting...

  3. Report 20.4: Lumen and Chromaticity Maintenance of LED PAR38 Lamps |

    Energy Savers [EERE]

    Department of Energy 4: Lumen and Chromaticity Maintenance of LED PAR38 Lamps Report 20.4: Lumen and Chromaticity Maintenance of LED PAR38 Lamps PDF icon Report 20.4: Lumen and Chromaticity Maintenance

  4. Vietnam-EC-LEDS in the Agriculture Sector | Open Energy Information

    Open Energy Info (EERE)

    Sector Climate, Land Focus Area Agriculture, Economic Development, Greenhouse Gas, Land Use Topics Adaptation, Implementation, Low emission development planning, -LEDS,...

  5. Costa Rica-EC-LEDS in the Agriculture Sector | Open Energy Information

    Open Energy Info (EERE)

    Sector Climate, Land Focus Area Agriculture, Economic Development, Greenhouse Gas, Land Use Topics Adaptation, Implementation, Low emission development planning, -LEDS,...

  6. Kenya-EC-LEDS in the Agriculture Sector | Open Energy Information

    Open Energy Info (EERE)

    Sector Climate, Land Focus Area Agriculture, Economic Development, Greenhouse Gas, Land Use Topics Adaptation, Implementation, Low emission development planning, -LEDS,...

  7. Demonstration of LED Retrofit Lamps at the Smithsonian Art Museum, Washington, DC

    SciTech Connect (OSTI)

    Miller, N. J.; Rosenfeld, S. M.

    2012-06-01

    GATEWAY program report on a demonstration of LED retrofit lamps at the Smithsonian American Art Museum in Washington, DC.

  8. CALiPER Benchmark Report: Performance of Halogen Incandescent MR16 Lamps and LED Replacement

    SciTech Connect (OSTI)

    Paget, M. L.; Lingard, R. D.; Myer, M. A.

    2008-11-01

    This benchmark report addresses the halogen MR16 lamp and its commercially available light-emitting diode (LED) replacements.

  9. Use of Occupancy Sensors in LED Parking Lot and Garage Applications: Early Experiences

    SciTech Connect (OSTI)

    Kinzey, B. R.; Myer, M. A.; Royer, M. P.; Sullivan, G. P.

    2012-10-01

    Final GATEWAY program report on the early experiences of using occupancy sensors in LED parking lot and garage applications.

  10. Technical Feasibility Assessment of LED Roadway Lighting on the Golden Gate Bridge

    SciTech Connect (OSTI)

    Tuenge, J. R.

    2012-09-01

    GATEWAY program report on the technical feasibility of LED roadway lighting on the Golden Gate Bridge in San Francisco, CA.

  11. WEBINAR: LED LIGHTING IN A PERFORMING ARTS BUILDING | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    WEBINAR: LED LIGHTING IN A PERFORMING ARTS BUILDING WEBINAR: LED LIGHTING IN A PERFORMING ARTS BUILDING Can LEDs render skin tones and makeup accurately in a dressing room? Can they provide the vertical footcandles in a studio to make dancers' bodies visible, or deliver acting studio lighting to bring out facial expressions and body movements? Can LEDs deliver adequate flicker-free light in the Scene Shop, where students are using saws and other construction tools? And, can they compete with

  12. Report 20.5: Chromaticity Shift Modes of LED PAR38 Lamps Operated in

    Energy Savers [EERE]

    Steady-State Conditions | Department of Energy 5: Chromaticity Shift Modes of LED PAR38 Lamps Operated in Steady-State Conditions Report 20.5: Chromaticity Shift Modes of LED PAR38 Lamps Operated in Steady-State Conditions PDF icon Report 20.5: Chromaticity Shift Modes of LED PAR38 Lamps Operated in Steady-State Conditions More Documents & Publications Report 20.4: Lumen and Chromaticity Maintenance of LED PAR38 Lamps Retail Lamps Study 3.2: Lumen and Chromaticity Maintenance of LED A

  13. Researchers Say They've Solved the Mystery of LED Lighting "Droop"

    Broader source: Energy.gov [DOE]

    Despite being cool, ultra-efficient and long lasting, the light-emitting diode (LED) faces a problem called “efficiency droop.” New findings from simulations carried out at the National Energy Research Scientific Computer Center (NERSC) have unearthed droop’s elusive cause, researchers say, paving the way for wider LED use. An illustration of nitride-based LEDs.| Courtesy of the National Energy Research Scientific Computing Center.

  14. Secretary Chu Announces $38 Million for 42 University-Led Nuclear Research

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Development Projects | Department of Energy 8 Million for 42 University-Led Nuclear Research and Development Projects Secretary Chu Announces $38 Million for 42 University-Led Nuclear Research and Development Projects May 20, 2010 - 12:00am Addthis Washington, D.C. - U.S. Secretary of Energy Steven Chu today announced the selection of 42 university-led research and development projects for awards totaling $38 million. These projects, funded over three to four years through the

  15. Philips Lumileds Achieves 139 lm/W in a Neutral White LED

    Broader source: Energy.gov [DOE]

    Philips Lumileds' LUXEON Rebel LED can now deliver 139 lm/W in a neutral white LED. The top bin LED, developed with a single InGaN die and phosphor conversion, shows high-performance characteristics up to 139 lm/W and 138 lumens at 350 mA, with a forward voltage of 2.83 V. The CCT of the device is 5385K and the CRI is 70.

  16. Department of Energy Announces $17 Million to Bolster University-Led

    Energy Savers [EERE]

    Nuclear Energy Research and Development | Department of Energy $17 Million to Bolster University-Led Nuclear Energy Research and Development Department of Energy Announces $17 Million to Bolster University-Led Nuclear Energy Research and Development September 21, 2011 - 1:39pm Addthis Washington, D.C. - The U.S. Department of Energy today announced that $17 million in research grants will be awarded to 23 university-led teams aimed at strengthening the robust research and development

  17. Solar LED Light Pilot Project Illuminates the Way in Alabama | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy LED Light Pilot Project Illuminates the Way in Alabama Solar LED Light Pilot Project Illuminates the Way in Alabama September 12, 2012 - 2:15pm Addthis Boaz, Alabama Mayor Tim Walker, along with state representatives and community leaders, cut the ribbon for the state's solar LED light pilot project. | Photo courtesy of Lionel Green, Sand Mountain Reporter. Boaz, Alabama Mayor Tim Walker, along with state representatives and community leaders, cut the ribbon for the state's solar

  18. DOE Science Showcase - Light-emitting Diode (LED) Lighting Research | OSTI,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    US Dept of Energy, Office of Scientific and Technical Information Light-emitting Diode (LED) Lighting Research Light-emitting diode (LED) lighting is a type of solid-state lighting that uses a semiconductor to convert electricity to light. LED lighting products are beginning to appear in a wide variety of home, business, and industrial products such as holiday lighting, replacement bulbs for incandescent lamps, street lighting, outdoor area lighting and indoor ambient lighting. Over the past

  19. Text-Alternative Version: CALiPER Series 21 on LED Linear Lamps and Troffer

    Energy Savers [EERE]

    Lighting | Department of Energy Information Resources » Videos » Text-Alternative Version: CALiPER Series 21 on LED Linear Lamps and Troffer Lighting Text-Alternative Version: CALiPER Series 21 on LED Linear Lamps and Troffer Lighting Following is a text version of a video about CALiPER Application Report Series 21 on LED Linear Lamps and Troffer Lighting. Tracy Beeson, Lighting Engineer, Pacific Northwest National Laboratory: Fluorescent troffers are widely used in office spaces, meeting

  20. Secretary Chu Announces $38 Million for 42 University-Led Nuclear Research

    Energy Savers [EERE]

    and Development Projects | Department of Energy $38 Million for 42 University-Led Nuclear Research and Development Projects Secretary Chu Announces $38 Million for 42 University-Led Nuclear Research and Development Projects May 20, 2010 - 12:05pm Addthis WASHINGTON, D.C. - U.S. Secretary of Energy Steven Chu today announced the selection of 42 university-led research and development projects for awards totaling $38 million. These projects, funded over three to four years through the

  1. Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting

    Energy Savers [EERE]

    Products | Department of Energy Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products This March 28, 2013 webcast reviewed DOE's recently completed three-part study of the life-cycle energy and environmental impacts of LED lighting products relative to incandescent and CFL alternatives. The reports for Parts 1 and 2 were published in February 2012 and June 2012, respectively,

  2. How City-Led Efficiency Efforts Can Support State Climate and Energy

    Energy Savers [EERE]

    Planning | Department of Energy City-Led Efficiency Efforts Can Support State Climate and Energy Planning How City-Led Efficiency Efforts Can Support State Climate and Energy Planning Provides states and their stakeholders with a short synopsis for what it would look like to include city-led energy efficiency efforts in their climate and energy plans, including current activity at the national and state levels, best practices, energy savings examples, cost-effectiveness, EM&V and DOE

  3. Member Case Studies: LED Street Lighting Programs in Algona (IA), Asheville

    Energy Savers [EERE]

    (NC), and Boston (MA) | Department of Energy Member Case Studies: LED Street Lighting Programs in Algona (IA), Asheville (NC), and Boston (MA) Member Case Studies: LED Street Lighting Programs in Algona (IA), Asheville (NC), and Boston (MA) This May 8, 2013 webcast featured presentations from DOE Municipal Solid-State Street Lighting Consortium member cities about their experiences with LED street lighting. Presenters John Bilsten of Algona (IA) Municipal Utilities, Maggie Ullman of the City

  4. LED Provides Effective and Efficient Parking Area Lighting at the NAVFAC

    Office of Environmental Management (EM)

    Engineering Service Center | Department of Energy LED Provides Effective and Efficient Parking Area Lighting at the NAVFAC Engineering Service Center LED Provides Effective and Efficient Parking Area Lighting at the NAVFAC Engineering Service Center Document details new lighting technology that reduces energy consumption and reduces maintenance, while providing effective illumination. PDF icon led_parking_lights_navfac.pdf More Documents & Publications Effective White Light Options for

  5. Text-Alternative Version: MSSLC Member Case Studies- LED Street Lighting Programs Webinar

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the "MSSLC Member Case Studies - LED Street Lighting Programs" webcast, held May 8, 2013.

  6. Zimbabwe-Terms of Reference for Future LEDS | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name Zimbabwe-Terms of Reference for Future LEDS AgencyCompany Organization Climate and Development Knowledge Network (CDKN), United Kingdom...

  7. 2015 DOE SSL R&D Workshop LED Topic Table Questions to Consider

    Broader source: Energy.gov [DOE]

    This document was distributed during the LED Topic Table portion of the DOE SSL R&D Workshop and aimed to prompt discussion on the following topics:

  8. Demonstration Assessment of LED Roadway Lighting: NE Cully Blvd., Portland, OR

    SciTech Connect (OSTI)

    Royer, M. P.; Poplawski, M. E.; Tuenge, J. R.

    2012-08-01

    GATEWAY program report on a demonstration of LED roadway lighting on NE Cully Boulevard in Portland, OR, a residential collector road.

  9. Text-Alternative Version: LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR®

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR® webcast.

  10. Text Alternative Version: Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the "Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products" webcast, held March 28, 2013.

  11. LED Linear Lamps and Troffer Lighting: CALiPER Report Series 21 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Videos » LED Linear Lamps and Troffer Lighting: CALiPER Report Series 21 LED Linear Lamps and Troffer Lighting: CALiPER Report Series 21 View the video about CALiPER Report Series 21 on LED Linear Lamps and Troffer Lighting, featuring interviews with Tracy Beeson and Naomi Miller of Pacific Northwest National Laboratory. View the text-alternative version. Solid-State Lighting Home About the Solid-State Lighting Program Research & Development SSL Basics Using LEDs

  12. DOE-Led Research Team Makes Significant Rare Earth Discovery | Department

    Energy Savers [EERE]

    of Energy DOE-Led Research Team Makes Significant Rare Earth Discovery DOE-Led Research Team Makes Significant Rare Earth Discovery January 15, 2016 - 9:45am Addthis DOE-Led Research Team Makes Significant Rare Earth Discovery A team of researchers led by experts from the Department of Energy (DOE) has found that rare earth elements (REEs) can be removed from two U.S. coal byproduct materials through an ion-exchange process. This discovery could potentially expand the U.S. domestic resource

  13. LED Linear Lamps and Troffer Lighting: CALiPER Report Series 21

    SciTech Connect (OSTI)

    Beeson, Tracy; Miller, Naomi

    2014-06-17

    Video about CALiPER Report Series 21 on LED Linear Lamps and Troffer Lighting, featuring interviews with Tracy Beeson and Naomi Miller of Pacific Northwest National Laboratory.

  14. LED Linear Lamps and Troffer Lighting: CALiPER Report Series 21

    ScienceCinema (OSTI)

    Beeson, Tracy; Miller, Naomi

    2014-06-23

    Video about CALiPER Report Series 21 on LED Linear Lamps and Troffer Lighting, featuring interviews with Tracy Beeson and Naomi Miller of Pacific Northwest National Laboratory.

  15. CALiPER Benchmark Report: Performance of Incandescent A Type and Decorative Lamps and LED Replacements

    SciTech Connect (OSTI)

    Lingard, R. D.; Myer, M. A.; Paget, M. L.

    2008-11-01

    This benchmark report addresses common omnidirectional incandescent lamps - A-type and small decorative, candelabra-type lamps - and their commercially available light-emitting diode (LED) replacements.

  16. Bottom Up and Country Led: A New Framework for Climate Action...

    Open Energy Info (EERE)

    transition strategically to low-carbon economic development while bolstering their resilience to the effects of climate change." References "Bottom Up and Country Led: A New...

  17. DOE Publishes CALiPER Report on Lumen and Chromaticity Maintenance of LED

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PAR38 Lamps | Department of Energy Lumen and Chromaticity Maintenance of LED PAR38 Lamps DOE Publishes CALiPER Report on Lumen and Chromaticity Maintenance of LED PAR38 Lamps February 11, 2015 - 2:54pm Addthis The U.S. Department of Energy's CALiPER program has released Report 20.4, which is part of a series of investigations on LED PAR38 lamps. Report 20.4 focuses on lumen maintenance, chromaticity maintenance, and catastrophic failure in 32 of the Series 20 LED PAR38 lamps and eight

  18. DOE Publishes CALiPER Report on the Photoelectric Performance of LED MR16

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lamps | Department of Energy the Photoelectric Performance of LED MR16 Lamps DOE Publishes CALiPER Report on the Photoelectric Performance of LED MR16 Lamps September 11, 2015 - 4:10pm Addthis The U.S. Department of Energy's CALiPER program has released Report 22.1, which is part of a series of investigations on LED MR16 lamps. Report 22 investigated the photometric performance of 27 LED MR16 lamps compared to benchmark halogens. Report 22.1 examines the photoelectric performance of that

  19. Text-Alternative Version: CALiPER Report Series 20 on LED PAR38 Lamps |

    Energy Savers [EERE]

    Department of Energy Text-Alternative Version: CALiPER Report Series 20 on LED PAR38 Lamps Text-Alternative Version: CALiPER Report Series 20 on LED PAR38 Lamps Michael Royer, Lighting Engineer, Pacific Northwest National Laboratory: The CALiPER program looks at typical LED lamp performance attributes. As we've gone through the progression of reports, we've really seen that a lot of times we're coming to the same conclusions-- that based on basic performance, LED products, at least some of

  20. Salazar, Chu to Flip Switch on Energy-Efficient LED Lights on National Mall

    Energy Savers [EERE]

    | Department of Energy Salazar, Chu to Flip Switch on Energy-Efficient LED Lights on National Mall Salazar, Chu to Flip Switch on Energy-Efficient LED Lights on National Mall January 30, 2012 - 11:02am Addthis WASHINGTON, D.C.-Today, Secretary of the Interior Ken Salazar and Secretary of Energy Steven Chu will participate in a lighting ceremony featuring the newly-installed LED lights on the National Mall. Illuminating the Mall from 3rd to 15th Streets, the LED technology is expected to