National Library of Energy BETA

Sample records for lead jeff jones

  1. 1 billion times brighter than the sun: Will Jeff Lab's beam lead...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    billion times brighter than the sun: Will Jeff Lab's beam lead to new discoveries? (Daily Press) External Link: http:articles.dailypress.com2011-01-17news...

  2. 1 billion times brighter than the sun: Will Jeff Lab's beam lead to new

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    discoveries? (Daily Press) | Jefferson Lab billion times brighter than the sun: Will Jeff Lab's beam lead to new discoveries? (Daily Press) External Link: http://articles.dailypress.com/2011-01-17/news/dp-nws-cp-jlab-laser-20110116_1_s... By jlab_admin on Thu, 2011-01-20 00:00

  3. Jeff Grounds

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jeff Grounds Jeff Grounds jeffgrounds-sm.jpg Jeff Grounds Facilities Manager JTGrounds@lbl.gov Phone: (510) 486-7197 Mobile: (510) 207-2273 Last edited: 2016-04-29 11:34:57

  4. Jeff Lane

    Broader source: Energy.gov [DOE]

    Jeff Lane is a former Assistant Secretary of the Office of Congressional and Intergovernmental Affairs.Jeff Lane spent almost 16 years serving in senior legislative and management positions in the...

  5. Jeff Broughton

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jeff Broughton Jeff Broughton Portrait Jeff Broughton Deputy for Operations and Systems Department Head JBroughton@lbl.gov Phone: (510) 486-5972 Fax: (510) 486-4316 1 Cyclotron Road Mail Stop 943-256 Berkeley, CA 94720 US Biographical Sketch Jeff Broughton is the NERSC Deputy for Operations and Systems Department Head, and has responsibility for acquiring, installing and operating all computational, networking and storage equipment for NERSC and the Joint Genome Institute. Current projects

  6. Jeff Porter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jeff Porter Jeff Porter R Jefferson Porter Jefferson (Jeff) R. Porter Ph.D. Data & Analytics Group National Energy Research Scientific Computing Center RJPorter@lbl.gov Phone: (510) 502-7231 Fax: (510) 486-4316 Lawrence Berkeley National Laboratory 1 Cyclotron Road Mail Stop 943-256 Berkeley, CA 94720 Biographical Sketch Jeff Porter is a member of the Data and Analytics Services team, supporting grid and distributed computing services at NERSC. Jeff earned his PhD in Nuclear Physics from UC

  7. Jeff Atherton

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    jeffrey atherton Jeff Atherton Jeff Atherton Principal Deputy Principal Associate Director NIF & Photon Science Dr. L. Jeffrey (Jeff) Atherton is the principal deputy principal associate director for the NIF & Photon Science Directorate, with management and oversight responsibility for broad aspects of the directorate. He also serves as co-manager for target fabrication. Dr. Atherton received his B.S. degree in chemical engineering from Caltech and his Ph.D. degree in chemical

  8. Jeff Candy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jeff Candy Jeff Candy FES Requirements Worksheet 1.1. Project Information - Magnetic Fusion Plasma Microturbulence Project Document Prepared By Jeff Candy Project Title Magnetic Fusion Plasma Microturbulence Project Principal Investigator Bruce Cohen Participating Organizations This project spans numerous labs and institutions worldwide. Funding Agencies DOE SC DOE NSA NSF NOAA NIH Other: 2. Project Summary & Scientific Objectives for the Next 5 Years Please give a brief description of your

  9. Jeff Horner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    horner Jeff Horner Jeff Horner Jeff Horner Project Engineer Advanced Photon Technologies NIF & Photon Science Jeffrey B. Horner is the project engineer for the High Repetition Rate Advanced Petawatt Laser System (HAPLS), now under construction at LLNL for delivery to the European Extreme Light Infrastructure Facility in the Czech Republic. HAPLS will be the world's highest average power petawatt laser system, capable of delivering energetic femtosecond laser pulses with 1015 watts of peak

  10. Jeff Wisoff

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    wisoff Jeff Wisoff Jeff Wisoff Principal Associate Director NIF & Photon Science Dr. Peter J. K. (Jeff) Wisoff, principal associate director of NIF and Photon Science, came to LLNL in the fall of 2001 as a deputy associate project manager for systems engineering at NIF. In 2003, he became the associate project manager for small optical systems on NIF, which included responsibility for the front end of the laser and laser diagnostics. Prior to assuming the role of principal associate director

  11. Jeff Broughton

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    disciplines as both an engineer and manager, including networking, computer-aided design, processor design, compilers, and operating systems. Jeff holds multiple patents. His...

  12. Jeff Chamberlain

    ScienceCinema (OSTI)

    Jeff Chamberlain

    2010-01-08

    Jeff Chamberlain, technology transfer expert at Argonne National Laboratory, speaks on the new technology Lithium-air batteries, which could potentially increase energy density by 5-10 times over lithium-ion batteries.

  13. Jeff Chamberlain

    SciTech Connect (OSTI)

    Jeff Chamberlain

    2009-09-14

    Jeff Chamberlain, technology transfer expert at Argonne National Laboratory, speaks on the new technology Lithium-air batteries, which could potentially increase energy density by 5-10 times over lithium-ion batteries.

  14. Jeff Zients | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Jeff Zients About Us Jeff Zients - Acting Director of the Office of Management and Budget Most Recent Building Momentum June 28

  15. Tommy Jones

    Broader source: Energy.gov [DOE]

    Tommy Jones is both an Aleut and Cherokee Tribe member from Jones, Oklahoma. He attended Oklahoma City University and graduated with a bachelor’s in biology and Spanish. Afterward, he went to...

  16. Employee Spotlight: Jeff Martin

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jeff Martin Jeff Martin-Going feral Two long-distance solo hikes on the breathtaking Colorado Plateau took Martin into the vicinity of Canyonlands National Park, the Glen Canyon National Recreation Area and Lake Powell martin martin martin martin martin martin martin martin martin 12 3 45 6 789 "There is not much sound down here, just the light crunch of my steps on the canyon floor's natural gravel and the occasional scrape of my pack as it touches the walls." Going feral It usually

  17. JeffPorter-ALICE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    H eavy---ion c ollider e xperiments: F ocus o n ALICE e xperiment a t t he L HC 5/26/11 1 Jeff Porter LBNL ~1995 R. Jeff Porter (LBNL) STAR ALICE P rocessing m odel f or A LICE & S TAR o n N ERSC/PDSF * Event---based p rocessing  " pleasantly p arallel" - Event = i ndependent " collision" r egistered i n d etector - Task = p rocess a n e vent c ollec0on, s et o f i ndependent j obs - Naturally d istributed: o n c luster, g rid o f c lusters ... * Data I ntensive -

  18. Donna Jones Pelkie | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Donna Jones Pelkie

  19. The Honorable Jeff Bingaman Chairman

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    , 2008 The Honorable Jeff Bingaman Chairman Committee on Energy and Natural Resources United States Senate Washington, DC 20510-6150 Dear Mr. Chairman: Thank you for your May 12,2008, letter concerning the current and projected impacts of biofuels on food and gasoline prices, among other issues. We emphatically agree with the suggestion in your press release of May 15 concerning this letter that "it's wise for folks to catch their breath and get better educated on the complexities before

  20. Guest Speaker: Jeff Thompson, PhD

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NYPD Detective Jeff Thompson will discuss how crisis negotiators have de-escalated tense situations, demonstrated empathy, built rapport and trust, and successfully influenced ...

  1. Jeff Dagle, PE Pacific Northwest National Laboratory

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    responsive demand Jeff Dagle, PE Pacific Northwest National Laboratory jeff@pnnl.gov September 16, 2014 Berkeley, CA DOE/OE Transmission Reliability R&D Load as a Resource (LaaR) Project objectives * Provide a framework to facilitate large-scale deployment of frequency responsive end-use devices * Systematically design decentralized frequency-based load control strategies for enhanced stability performance * Ensure applicability over wide range of operating conditions while accounting for

  2. Jeff Broughton Named NERSC Division Deputy for Operations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jeff Broughton Named NERSC Division Deputy for Operations Jeff Broughton Named NERSC Division Deputy for Operations August 15, 2013 broughton Jeff Broughton Jeff Broughton has been named as the new NERSC Division Deputy for Operations. The announcement was made Aug. 15 by NERSC Division Director Sudip Dosanjh. "Rather than this being a new position, the Division Deputy title is a fitting recognition of the duties and responsibilities Jeff has taken on since he joined NERSC four years

  3. Seminar Steve Jones

    ScienceCinema (OSTI)

    None

    2011-04-25

    Steve Jones de l'Université d'Utah qui était déjà au Cern auparavent parle d"observation of cold nuclear fusion and condensed matter"

  4. Jeff Chamberlain on Lithium-air batteries

    ScienceCinema (OSTI)

    Chamberlain, Jeff

    2013-04-19

    Jeff Chamberlain, technology transfer expert at Argonne National Laboratory, speaks on the new technology Lithium-air batteries, which could potentially increase energy density by 5-10 times over lithium-ion batteries. More information at http://www.anl.gov/Media_Center/News/2009/batteries090915.html

  5. Jeff Chamberlain on Lithium-air batteries

    SciTech Connect (OSTI)

    Chamberlain, Jeff

    2009-01-01

    Jeff Chamberlain, technology transfer expert at Argonne National Laboratory, speaks on the new technology Lithium-air batteries, which could potentially increase energy density by 5-10 times over lithium-ion batteries. More information at http://www.anl.gov/Media_Center/News/2009/batteries090915.html

  6. Scott Jones | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scott Jones Scott Jones is a Coordinating WriterEditor within Argonne's Business and Technical Communications group. Contact him at (630) 252-6806 or media@anl.gov....

  7. John Paul Jones

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    John Paul Jones About ESnet Our Mission The Network ESnet History Governance & Policies Career Opportunities ESnet Staff & Org Chart ESnet Leadership Administration Advanced Network Technologies Cybersecurity Infrastructure, Identity & Collaboration Network Engineering Dale Carder Paul Wefel Network Planning Operational Enhancements Office of the CTO Science Engagement Tools Team Contact Us Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638 (Inside US) 1

  8. Sandia Energy - Jeff Tsao participates in "Energy Efficiency...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tsao participates in "Energy Efficiency and the Rebound Effect" Workshop Home Solid-State Lighting News Jeff Tsao participates in "Energy Efficiency and the Rebound Effect"...

  9. #AskBerkeleyLab: Jeff Greenblatt Talks Greenhouse Gas Emissions

    SciTech Connect (OSTI)

    Greenblatt, Jeff

    2015-02-02

    We received questions from our social media audience around California's goal to dramatically reduce its greenhouse gas emissions by 2030. Berkeley Lab scientist Jeff Greenblatt answers them here.

  10. The energy manhattan project that will change everything | Jeff Chamberlain

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | TEDxNaperville - Joint Center for Energy Storage Research December 24, 2014, Videos The energy manhattan project that will change everything | Jeff Chamberlain | TEDxNaperville Jeff Chamberlain gave a TEDx talk focused on the importance of energy storage and the role JCESR is taking in the quest for better batteries

  11. Edward Jones, Lawrence Livermore National Laboratory, Outcomes...

    Energy Savers [EERE]

    Edward Jones, Lawrence Livermore National Laboratory, Outcomes of U.S.-Japan Roundtable Edward Jones, Lawrence Livermore National Laboratory, Outcomes of U.S.-Japan Roundtable...

  12. Katie Elyce Jones | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Katie Elyce Jones Katie Elyce Jones is a science writer. Contact her at media@anl.gov or (630) 252-5690

  13. QER- Comment of Jeff Cobb 1

    Broader source: Energy.gov [DOE]

    Hello, I've tried calling, but no one answers, and there is no way to leave a voicemail. I'm confused as to how public servants could have such a system. Unable to find a better email address or phone, I'm trying this one. I'm aware that the QER in New Orleans just took place this week. General Honore asked me to find out how he can become a panelist for future QERs, please. Thanks! Jeff Cobb Very few people on earth ever get to say: 'I'm doing, right now, the most important thing I could possibly be doing.' If you join the fight against climate change, that's what you'll get to say. - Bill McKibben

  14. QER- Comment of Jeff Cobb 2

    Broader source: Energy.gov [DOE]

    'm doing, right now, the most important thing I could possibly be doing.' If you join the fight against climate change, that's what you'll get to say. - Bill McKibben Louisiana Department of Wildlife & Fisheries Attn: Chris Davis Re: Louisiana Natural and Scenic Rivers System Permit Applications # 896 & 902 Dear Mr. Davis, I am writing to request a public hearing on the two permits shown above. Both of these are vital natural Louisiana scenic river resources. As such, both are enjoyed by many citizens in our extended community. The thought of allowing fresh water to be pulled out of these rivers in such large quantities to satisfy the needs of large corporate industrial projects that will pollute the water to such a degree that it can never be safely returned to the eco-system is abhorrent. According to Wilma Subra*, the early phases of production after fracking, the produced water flows to the surface mixed with flowback water. The produced water is disposed of in injection/disposal wells. The produced water contains toxic chemical contaminants: volatile organic compounds, such as benzene, ethyl benzene, toluene and xylene semi-volatile organic compound such as naphthalene, phenanthrene heavy metals such as arsenic, cadmium, chromium, lead sulfur containing compounds NORM Radioactive Radium 226, Radium 228 and Uranium 238 These are only the first permits of what will become literally, thousands, should you allow this activity. I ask you to mindfully consider the impact of thousands of hydrofracturing wells in our area, depleting water supplies at alarming rates. Thank you for your time and consideration in this matter. I look forward to hearing from you regarding public hearings on these permit requests. Additionally, I would like to request a full Environmental Impact Statement regarding the use of our scenic rivers for such activity. Sincerely, Jeff Cobb *Subra holds degrees in Microbiology/Chemistry from the University of Southwestern Louisiana, received the Mac

  15. 2013 Federal Energy and Water Management Award Winner Jeff Allen |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Jeff Allen 2013 Federal Energy and Water Management Award Winner Jeff Allen fewm13_usmc_allen_highres.pdf (1.84 MB) fewm13_usmc_allen.pdf (1.73 MB) More Documents & Publications Marine Corps Base Camp Pendleton Microsoft PowerPoint - Gough, USMC.ppt Federal Energy and Water Management Award Winners Kate Anderson, Scott Clark, Matthew Ellis, Vincent Guthrie, Mark Hunsickler

  16. Jones County, Georgia: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    in Jones County, Georgia Alterra Bioenergy LLC Places in Jones County, Georgia Gray, Georgia Macon, Georgia Retrieved from "http:en.openei.orgwindex.php?titleJonesCo...

  17. Remarks from Congressional Leaders: Senator Jeff Bingaman (2011 EFRC Summit)

    ScienceCinema (OSTI)

    Bingaman, Jeff (Senator, New Mexico)

    2012-03-14

    During the opening session of the EFRC Summit, Senator Jeff Bingaman (D-NM) explained how the EFRCs play an important role in the U.S. energy innovation ecosystem. The 2011 EFRC Summit and Forum brought together the EFRC community and science and policy leaders from universities, national laboratories, industry and government to discuss "Science for our Nation's Energy Future." In August 2009, the Office of Science established 46 Energy Frontier Research Centers. The EFRCs are collaborative research efforts intended to accelerate high-risk, high-reward fundamental research, the scientific basis for transformative energy technologies of the future. These Centers involve universities, national laboratories, nonprofit organizations, and for-profit firms, singly or in partnerships, selected by scientific peer review. They are funded at $2 to $5 million per year for a total planned DOE commitment of $777 million over the initial five-year award period, pending Congressional appropriations. These integrated, multi-investigator Centers are conducting fundamental research focusing on one or more of several ?grand challenges? and use-inspired ?basic research needs? recently identified in major strategic planning efforts by the scientific community. The purpose of the EFRCs is to integrate the talents and expertise of leading scientists in a setting designed to accelerate research that transforms the future of energy and the environment.

  18. Becca Jones-Albertus | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Becca Jones-Albertus About Us Dr. Becca Jones-Albertus - Acting Director, SunShot Initiative Dr. Becca Jones-Albertus is the Acting Director of the Solar Energy Technologies Office within the Office of Energy Efficiency and Renewable Energy, where she helps manage and balance the portfolio of research, development, demonstration, and deployment programs in achieving our national SunShot goals. Dr. Jones-Albertus has spent her career advancing solar cell materials and devices, from research and

  19. Katie Elyce Jones | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Katie Elyce Jones About Us Katie Elyce Jones - Symmetry Magazine Katie Elyce Jones writes for Symmetry Magazine, an online magazine about particle physics. Symmetry is a joint publication by Fermilab and SLAC, two of the Department of Energy's 17 National Laboratories. Most Recent How Do You Keep a Particle Inside an Accelerator? February 2

  20. Microsoft PowerPoint - 15.1130_Jeff Baker_Final Ultra-High Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    130Jeff BakerFinal Ultra-High Efficiency Commercial Buildings Microsoft PowerPoint - 15.1130Jeff BakerFinal Ultra-High Efficiency Commercial Buildings PDF icon Microsoft...

  1. Jones Splashland Pool & Spa Low Temperature Geothermal Facility...

    Open Energy Info (EERE)

    Splashland Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Jones Splashland Pool & Spa Low Temperature Geothermal Facility Facility Jones Splashland...

  2. Jeff Edlund of the NNSA Production Office Y12 Site Named 2015 Facility

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Representative of the Year | Department of Energy Jeff Edlund of the NNSA Production Office Y12 Site Named 2015 Facility Representative of the Year Jeff Edlund of the NNSA Production Office Y12 Site Named 2015 Facility Representative of the Year May 24, 2016 - 10:30am Addthis Jeff Edlund of the NNSA Production Office Y12 Site Named 2015 Facility Representative of the Year About 200 Department of Energy (DOE) federal employees are Facility Representatives (FR) who provide day-to-day oversight

  3. Oregon Senator Jeff Merkley to Visit Surprise Valley Electrification Corp. Project Site

    Broader source: Energy.gov [DOE]

    Senator Jeff Merkley of Oregon will be stopping by our ARRA Low-Temperature project, Surprise Valley Electrification Corp., this Sunday, August 28, 2011, for a brief site visit.

  4. 2012 CERTS LAAR Program Peer Review - Frequency Response Demand - Jeff Dagle, PNNL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Responsive Demand Jeff Dagle, PE Chief Electrical Engineer Advanced Power & Energy Systems Pacific Northwest National Laboratory (509) 375-3629 jeff.dagle@pnl.gov CERTS Project Meeting Berkeley, CA September 20, 2012 Acknowledgements Montana Tech University MK Donnelly DJ Turdnowski S Mattix 2 Project Objective This project is evaluating the utilization of large numbers of small loads to provide spinning reserve The specific scope of this project is comparing the ability of load to provide

  5. Microsoft Word - 05 Jones.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science on Saturday Lecture 8 February 2014 Uncovering cosmic origins: what we know, what we can know, and what limits we may face William C. Jones Princeton University Department of Physics Princeton, NJ ABSTRACT: Understanding the structure and evolution of our Universe has been a human pastime for thousands of years, but prior to the invention of crossword puzzles and fortune cookies, not much of any quantitative progress had been made. I'll discuss some of the remarkable progress that has

  6. Lawrence Jones 121 Metals Development Building,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    mpc.ameslab.gov Lawrence Jones 121 Metals Development Building, Ames, IA 50011-3020 jonesll@ameslab.gov 515-294-5236 Like high purity research-grade gadolinium. But the Materials Preparation Center at the Ames Laboratory is that scientific specialty shop where researchers can go for unmatched purity and quality in rare-earth specimens. It's also one of the few places in the world where scientists and engineers from academic institutions and industries can obtain custom-designed materials for

  7. Meet CMI Researcher Ed Jones | Critical Materials Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ed Jones CMI focus area deputy leader Ed Jones CMI researcher Ed Jones has been at Lawrence Livermore National Laboratory (LLNL) for 22 years, where his work has centered on the analysis, engineering, reliability and performance of energy, environmental, and national asset systems, including infrastructure and materials. He has developed extensive capabilities in the application of probabilistic methods and models to complex performance problems. Recent innovations have been applied to carbon

  8. Jones-Onslow EMC- Residential Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    Jones-Onslow Electric Membership Corporation offers rebates to residential members who install energy efficient heating and cooling equipment. Members can replace an existing central AC or heat...

  9. Jones County, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Datasets Community Login | Sign Up Search Page Edit with form History Jones County, Texas: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates...

  10. Jones-Onslow EMC- Residential Heating and Cooling Rebate Program

    Broader source: Energy.gov [DOE]

    Jones-Onslow Electric Membership Corporation offers rebates to residential members who install energy efficient heating and cooling equipment. Members can replace an existing central AC or heat...

  11. Champions in Science Whose Stars are Still Rising: Profile of Jeff Zira |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    U.S. DOE Office of Science (SC) Jeff Zira News News Home Featured Articles 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 Science Headlines Science Highlights Presentations & Testimony News Archives Communications and Public Affairs Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 04.29.16 Champions in Science Whose Stars are Still Rising: Profile of Jeff Zira For the run-up to the 2016 National

  12. Engineer Marshall Jones Recognized by Price Chopper | GE Global...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineer Marshall Jones Recognized by Price Chopper Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new ...

  13. Mr. Jeff Dolven President and Chief Executive Officer Skookum Contract Services

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2, 2015 Mr. Jeff Dolven President and Chief Executive Officer Skookum Contract Services P.O. Box 5359 Bremerton, Washington 98312 WEL-2015-03 Dear Mr. Dolven: The Office of Enterprise Assessments' Office of Enforcement conducted an investigation into the partial finger amputation sustained by a Skookum Contract Services (Skookum) worker on December 4, 2014, during transformer demolition at the Office of Secure Transportation's Vehicle Maintenance Facility (VMF) in Oak Ridge, Tennessee. Based on

  14. Mr. Jeff Selvey Project Manager Separations Process Research Unit Disposition Project

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Mr. Jeff Selvey Project Manager Separations Process Research Unit Disposition Project URS Energy and Construction, Inc. 2345 Nott Street East Suite 200 St. James Square Niskayuna, New York 12309 WEL-2016-02 Dear Mr. Selvey: The Office of Enterprise Assessments' Office of Enforcement conducted an investigation of the heat stress management program being implemented by URS Energy and Construction, Inc. (URS) during Deactivation and Decommissioning (D&D) work at the Department of Energy's

  15. Improved mixed oxide fuel calculations with the evaluated nuclear data library JEFF-3.2

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Noguere, G.; Bernard, D.; Blaise, P.; Bouland, O.; Leal, Luiz C.; Leconte, P.; Litaize, O.; Peneliau, Y.; Roque, B.; Santamarina, A.; et al

    2016-02-01

    In this study, an overestimation of the keff values for mixed oxide (MOX) fuels was identified with Monte Carlo (TRIPOLI-4) and deterministic (APOLLO2) calculations based on the Joint Evaluated Fission and Fusion (JEFF) evaluated nuclear data library. The overestimation becomes sizeable with Pit aging, reaching a reactivity change of Delta(p)similar or equal to+700 pcm for integral measurements carried out with MOX fuel containing a large amount of americium. This bias was observed for various critical configurations performed in the zero power reactor EOLE of the Commissariat a l'energie atomique et aux energies alternatives (CEA), Cadarache, France. The present work focusesmore » on the improvements achieved with the new 239PU and 241Am evaluated nuclear data files available in the latest version of the JEFF library (JEFF-3.2). The resolved resonance range of the plutonium evaluation was reevaluated at Oak Ridge National Laboratory (ORNL), Oak Ridge, Tennessee, with the Ski/NH code in collaboration with CEA Cadarache. The resonance parameters of the americium evaluation were obtained with the REFIT code in collaboration with the research institutes Institute for Reference Materials and Measurements aRmm, Geel, Belgium, and Institut de recherche sur les lois fondamentales de l'Univers ofio, Saclay, France.« less

  16. February 8, 2014: Prof. William C. Jones, Princeton University: Uncovering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    our Cosmic Origins: What We Know, What We Can Know, and What Limits We May Face. | Princeton Plasma Physics Lab February 8, 2014, 9:30am to 11:00am Science On Saturday MBG Auditorium February 8, 2014: Prof. William C. Jones, Princeton University: Uncovering our Cosmic Origins: What We Know, What We Can Know, and What Limits We May Face. Professor William Jones, Assistant Professor of Physics Princeton University, Department of Physics Presentation: PDF icon Presentation Abstract: PDF icon 05

  17. Jeff Greeley

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    people to move into scientific careers. How did you explore your early interest in chemical engineering? When I started my undergraduate degree at UT-Austin, I was pretty...

  18. Jeff Tsao

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management Programs Advanced Nuclear Energy Nuclear

  19. Jeff Candy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (USA). This groups of codes has produced the most ambitious turbulent-transport benchmarking exercise ever carried out in the community, and has a track-record of extensive...

  20. Cristal Jones-Harris | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Cristal Jones-Harris Albert Einstein Distinguished Educator Fellowship (AEF) Program Einstein Fellowship Home Eligibility Benefits Obligations How to Apply Key Dates Frequently Asked Questions Fellows Central Current Fellows Alumni Fellows Official AEF Logos Contact WDTS Home Current Fellows Cristal Jones-Harris Print Text Size: A A A FeedbackShare Page Cristal Jones-Harris Fellowship Placement: National Aeronautics and Space Administration Hometown: Sandy Springs, GA Cristal Jones-Harris, Ed.

  1. Spin-orbit coupled jeff=1/2 iridium moments on the geometrically frustrated fcc lattice

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cook, A. M.; Matern, S.; Hickey, C.; Aczel, A. A.; Paramekanti, A.

    2015-07-01

    Motivated by experiments on La2ZnIrO6 and La2MgIrO6, we study the magnetism of spin-orbit coupled jeff = 1/2 iridium moments on the three-dimensional geometrically-frustrated face-centered cubic lattice. The symmetry-allowed nearest-neighbor interaction includes Heisenberg, Kitaev, and symmetric off-diagonal exchange. Using Luttinger-Tisza and Monte Carlo simulations, we find a rich variety of orders, including collinear A-type antiferromagnetism, collinear stripe order with moments along the {111}-direction, and incommensurate non-coplanar spirals, and determine their magnetic ordering transition temperatures. We argue that thermodynamic data on these iridates underscore the presence of a dominant Kitaev exchange, and suggest a possible resolution to the puzzle of why La2ZnIrO6,more » but not La2MgIrO6, exhibits 'weak' ferromagnetism.« less

  2. Fine-Group Cross Section Library Based on JEFF3.1 for Nuclear Fission Applications.

    Energy Science and Technology Software Center (OSTI)

    2009-10-16

    Version 00 The NJOY-99.160 data processing system was used for the MATJEFF31.BOLIB library generation to assure the consistency with the previous generation of the VITJEFF31.BOLIB /6/ twin library, based on the same GENDF cross section data file. In particular it used a revised version of the GROUPR /7/ module, originally developed in ENEA-Bologna before the free release of an analogous GROUPR revised version with NJOY-99.161, in order to correctly deal with the non-Cartesian interpolation schemes,more » contained in 69 JEFF-3.1 evaluated nuclear data files. The TRANSX-2.15 /8/ code was then used to obtain the total (prompt + delayed) fission spectra for U-235, U-238 and Pu-239. These data, contained in the MATJEFF31.BOLIB package, are available in tabulated form as in the VITJEFF31.BOLIB library package. On the contrary the VITAMIN-B6, VITJEF22.BOLIB /9/ and MATJEF22.BOLIB /10/ similar library packages contain in tabulated form only the prompt components. MATJEFF31.BOLIB is a pseudo-problem-independent library based on the Bondarenko /11/ (f-factor) method for the treatment of neutron resonance self-shielding and temperature effects. The library contains 176 nuclides at 4 temperatures, obtained for the most part with 6 to 8 values for the background cross section. Thermal scattering cross sections were processed at all temperatures available in the JEFF-3.1 thermal scattering law data file for 6 additional bound nuclides (H-1 in light water (H-H2O), H-1 in polyethylene (H-CH2), H-1 in zirconium hydride (H-ZrH) (not contained in VITAMIN-B6, VITJEF22.BOLIB and MATJEF22.BOLIB), H-2 in heavy water (H2-D2O), C in graphite (C-GPH) and Be in beryllium metal (Be-TH)). From MATJEFF31.BOLIB it is easily possible to generate, with the use of the TRANSX code, working libraries of collapsed and self-shielded cross sections in GOXS or FIDO-ANISN format for calculations with the DOORS /12/, DANTSYS /13/ and PARTISN /14/ deterministic transport systems and the MORSE /15/ Monte

  3. Jones O. & Associates of Hampton wins Jefferson Lab's annual Small

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Disadvantaged Business Subcontractor award | Jefferson Lab Jones O. & Associates of Hampton wins Jefferson Lab's annual Small Disadvantaged Business Subcontractor award Jones O. & Associates of Hampton wins Jefferson Lab's annual Small Disadvantaged Business Subcontractor award March 21, 2001 Jones O. & Associates, LLC, of Hampton, Va., won Jefferson Lab's Outstanding Small Disadvantaged Business Subcontractor Award for fiscal year 2000. JLab Interim Director Christoph

  4. Spin-orbit driven magnetic insulating state with Jeff=1/2 character in a 4d oxide

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Calder, S.; Li, Ling; Okamoto, Satoshi; Choi, Yongseong; Mukherjee, Rupam; Haskel, Daniel; Mandrus, D.

    2015-11-30

    The unusual magnetic and electronic ground states of 5d iridates has been shown to be driven by intrinsically enhanced spin-orbit coupling (SOC). The influence of appreciable but reduced SOC in creating the manifested magnetic insulating states in 4d oxides is less clear, with one hurdle being the existence of such compounds. Here we present experimental and theoretical results on Sr4RhO6 that reveal SOC dominated behavior. Neutron measurements show the octahedra are both spatially separated and locally ideal, making the electronic ground state susceptible to alterations by SOC. Magnetic ordering is observed with a similar structure to an analogous Jeff=1/2 Mottmore » iridate. We consider the underlying role of SOC in this rhodate with density functional theory and x-ray absorption spectroscopy and find a magnetic insulating ground state with Jeff =1/2 character.The unusual magnetic and electronic ground states of 5d iridates have been shown to be driven by intrinsically enhanced spin-orbit coupling (SOC). The influence of appreciable but reduced SOC in creating the manifested magnetic insulating states in 4d oxides is less clear, with one hurdle being the existence of such compounds. Here, we present experimental and theoretical results on Sr4RhO6 that reveal SOC dominated behavior. Neutron measurements show the octahedra are both spatially separated and locally ideal, making the electronic ground state susceptible to alterations by SOC. Magnetic ordering is observed with a similar structure to an analogous Jeff=1/2 Mott iridate. We consider the underlying role of SOC in this rhodate with density functional theory and x-ray absorption spectroscopy, and find a magnetic insulating ground state with Jeff=12 character.« less

  5. FIA-15-0058 - In the Matter of Bradley P. Jones | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    8 - In the Matter of Bradley P. Jones FIA-15-0058 - In the Matter of Bradley P. Jones On November 10, 2015, OHA granted in part and denied in part a FOIA and Privacy Act Appeal filed by Bradley P. Jones from a determination issued to him by the DOE Office of the Inspector General (OIG). In the Appeal, the Appellant challenged the use of Exemptions 5, 6, 7(A), 7(C), and 7(D) and the adequacy of the search for responsive documents. OHA found that although the use of the exemptions was appropriate,

  6. Statement from Secretary Bodman on Signing of the Jones Act Waiver |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy from Secretary Bodman on Signing of the Jones Act Waiver Statement from Secretary Bodman on Signing of the Jones Act Waiver September 26, 2005 - 10:52am Addthis WASHINGTON, DC - Please find below a statement from Department of Energy Secretary Samuel W. Bodman on DHS Secretary Chertoff's decision to waive the Jones Act. This waiver will allow foreign as well as U.S. shipping vessels to transport petroleum and refined petroleum products (gasoline and diesel) until 12:01

  7. FIA-13-0054- In the Matter of Dow Jones & Company

    Broader source: Energy.gov [DOE]

    On August 19, 2013, The Office of Hearings and Appeals (OHA) granted in part and denied in all other aspects an Appeal filed by Dow Jones & Co. (the Appellant) under the FOIA of a determination...

  8. Phase diagram of power law and Lennard-Jones systems: Crystal phases

    SciTech Connect (OSTI)

    Travesset, Alex

    2014-10-28

    An extensive characterization of the low temperature phase diagram of particles interacting with power law or Lennard-Jones potentials is provided from Lattice Dynamical Theory. For power law systems, only two lattice structures are stable for certain values of the exponent (or softness) (A15, body centered cube (bcc)) and two more (face centered cubic (fcc), hexagonal close packed (hcp)) are always stable. Among them, only the fcc and bcc are equilibrium states. For Lennard-Jones systems, the equilibrium states are either hcp or fcc, with a coexistence curve in pressure and temperature that shows reentrant behavior. The hcp solid never coexists with the liquid. In all cases analyzed, for both power law and Lennard-Jones potentials, the fcc crystal has higher entropy than the hcp. The role of anharmonic terms is thoroughly analyzed and a general thermodynamic integration to account for them is proposed.

  9. Qualification of JEFF3.1.1 library for high conversion reactor calculations using the ERASME/R experiment

    SciTech Connect (OSTI)

    Vidal, J. F.; Noguere, G.; Peneliau, Y.; Santamarina, A.

    2012-07-01

    With its low CO{sub 2} production, Nuclear Energy appears to be an efficient solution to the global warming due to green-house effect. However, current LWR reactors are poor uranium users and, pending the development of Fast Neutron Reactors, alternative concepts of PWR with higher conversion ratio (HCPWR) are being studied again at CEA, first studies dating from the middle 80's. In these French designs, low moderation ratio has been performed by tightening the lattice pitch, achieving a conversion ratio of 0.8-0.9 with a MOX fuel coming from PWR UOX recycling. Theses HCPWRs are characterized by a harder neutron spectrum and the calculation uncertainties on the fundamental neutronics parameters are increased by a factor 3 regarding a standard PWR lattice, due to the major contribution of the Plutonium isotopes and of the epithermal energy range to the reaction rates. In order to reduce these uncertainties, a 3-year experimental validation program called ERASME has been performed by CEA from 1984 to 1986 in the EOLE reactor. Monte Carlo analysis of the ERASME/R experiments with the Monte Carlo code TRIPOLI4 allowed the qualification of the recommended JEFF.3.1.1 library for major neutronics parameters. K{sub eff} of the MOX under-moderated lattice is over-predicted by 440 {+-} 830 pcm (2{sigma}); the conversion ratio, indicator of the good use of uranium, is also slightly over-predicted: 2 % {+-} 4 % (2{sigma}) and the same for B4C absorber rods worth and soluble boron worth, over-predicted by 2 %, both in the 2 standard deviations range. The radial fission maps of heterogeneities (water-holes, B4C and fertile rods) are well reproduced: maximal (C-E)/E dispersion is 1.3 %, maximal power peak error is 2.7 %. The void reactivity worth is the only parameter poorly calculated with an overprediction of +12.4% {+-} 1.5%. ERASME/R analysis of MOX reactivity, void effect and spectral indexes will contribute to the reevaluation of {sup 241}Am and Plutonium isotopes nuclear

  10. LEADING WITH LEADING INDICATORS

    SciTech Connect (OSTI)

    PREVETTE, S.S.

    2005-01-27

    This paper documents Fluor Hanford's use of Leading Indicators, management leadership, and statistical methodology in order to improve safe performance of work. By applying these methods, Fluor Hanford achieved a significant reduction in injury rates in 2003 and 2004, and the improvement continues today. The integration of data, leadership, and teamwork pays off with improved safety performance and credibility with the customer. The use of Statistical Process Control, Pareto Charts, and Systems Thinking and their effect on management decisions and employee involvement are discussed. Included are practical examples of choosing leading indicators. A statistically based color coded dashboard presentation system methodology is provided. These tools, management theories and methods, coupled with involved leadership and employee efforts, directly led to significant improvements in worker safety and health, and environmental protection and restoration at one of the nation's largest nuclear cleanup sites.

  11. Employee Spotlight: Jeff Martin

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    twice as high as the previous day-crotch-deep instead of knee-deep, with plenty of chest-deep sections, or deeper yet, interspersed with rapids. In addition, the river looks...

  12. ENDF/B-VII.0, ENDF/B-VI, JEFF-3.1, AND JENDL-3.3 RESULTS FOR UNREFLECTED PLUTONIUM SOLUTIONS AND MOX LATTICES (U)

    SciTech Connect (OSTI)

    MOSTELLER, RUSSELL D.

    2007-02-09

    Previous studies have indicated that ENDF/B-VII preliminary releases {beta}-2 and {beta}-3, predecessors to the recent initial release of ENDF/B-VII.0, produce significantly better overall agreement with criticality benchmarks than does ENDF/B-VI. However, one of those studies also suggests that improvements still may be needed for thermal plutonium cross sections. The current study substantiates that concern by examining criticality benchmarks for unreflected spheres of plutonium-nitrate solutions and for slightly and heavily borated mixed-oxide (MOX) lattices. Results are presented for the JEFF-3.1 and JENDL-3.3 nuclear data libraries as well as ENDF/B-VII.0 and ENDF/B-VI. It is shown that ENDF/B-VII.0 tends to overpredict reactivity for thermal plutonium benchmarks over at least a portion of the thermal range. In addition, it is found that additional benchmark data are needed for the deep thermal range.

  13. Richard Gerber! NERSC Senior Science Advisor! User Services Group Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Services Group Lead NUG Webinar January 2014 --- 1 --- January 9 , 2 014 Agenda * Edison C onfigura6on f or A Y 2 014 * Alloca6on Y ear R ollover I ssues * Project D irectories p er P roject * NUG 2 014 U ser G roup M ee6ng * Automa6c I /O P rofiling f or Y our C ode * Give / T ake U 6lity f or S haring F iles * NUG Q ueue C ommiRee U pdate * User Survey Needs Your Input * Open D iscussion --- 2 --- Edison Update --- 3 --- Jeff B roughton NERSC D eputy f or O pera6ons Systems D epartment H

  14. Evolution of competing magnetic order in the Jeff=1/2 insulating state of Sr2Ir1-xRuxO4

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Calder, Stuart A.; Kim, Jong-Woo; Cao, Guixin; Cantoni, Claudia; May, Andrew F; Cao, Huibo B.; Aczel, Adam A.; Matsuda, Masaaki; Choi, Yongseong; Haskel, Daniel; et al

    2015-10-27

    We investigate the magnetic properties of the series Sr2Ir1-xRuxO4 with neutron, resonant x-ray and magnetization measurements. The results indicate an evolution and coexistence of magnetic structures via a spin flop transition from ab-plane to c-axis collinear order as the 5d Ir4+ ions are replaced with an increasing concentration of 4d Ru4+ ions. The magnetic structures within the ordered regime of the phase diagram (x<0.3) are reported. Despite the changes in magnetic structure no alteration of the Jeff=1/2 ground state is observed. This behavior of Sr2Ir1-xRuxO4 is consistent with electronic phase separation and diverges from a standard scenario of hole doping.more » The role of lattice alterations with doping on the magnetic and insulating behavior is considered. Our results presented here provide insight into the magnetic insulating states in strong spin-orbit coupled materials and the role perturbations play in altering the behavior.« less

  15. Determination of anharmonic free energy contributions: Low temperature phases of the Lennard-Jones system

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Calero, C.; Knorowski, C.; Travesset, A.

    2016-03-22

    We investigate a general method to calculate the free energy of crystalline solids by considering the harmonic approximation and quasistatically switching the anharmonic contribution. The advantage of this method is that the harmonic approximation provides an already very accurate estimate of the free energy, and therefore the anharmonic term is numerically very small and can be determined to high accuracy. We further show that the anharmonic contribution to the free energy satisfies a number of exact inequalities that place constraints on its magnitude and allows approximate but fast and accurate estimates. The method is implemented into a readily available generalmore » software by combining the code HOODLT (Highly Optimized Object Oriented Dynamic Lattice Theory) for the harmonic part and the molecular dynamics (MD) simulation package HOOMD-blue for the anharmonic part. We use the method to calculate the low temperature phase diagram for Lennard-Jones particles. We demonstrate that hcp is the equilibrium phase at low temperature and pressure and obtain the coexistence curve with the fcc phase, which exhibits reentrant behavior. Furthermore, several implications of the method are discussed.« less

  16. Effect of confinement on the solid-liquid coexistence of Lennard-Jones Fluid

    SciTech Connect (OSTI)

    Das, Chandan K.; Singh, Jayant K.

    2013-11-07

    The solid-liquid coexistence of a Lennard-Jones fluid confined in slit pores of variable pore size, H, is studied using molecular dynamics simulations. Three-stage pseudo-supercritical transformation path of Grochola [J. Chem. Phys. 120(5), 2122 (2004)] and multiple histogram reweighting are employed for the confined system, for various pore sizes ranging from 20 to 5 molecular diameters, to compute the solid-liquid coexistence. The Gibbs free energy difference is evaluated using thermodynamic integration method by connecting solid-liquid phases under confinement via one or more intermediate states without any first order phase transition among them. Thermodynamic melting temperature is found to oscillate with wall separation, which is in agreement with the behavior seen for kinetic melting temperature evaluated in an earlier study. However, thermodynamic melting temperature for almost all wall separations is higher than the bulk case, which is contrary to the behavior seen for the kinetic melting temperature. The oscillation founds to decay at around H = 12, and beyond that pore size dependency of the shift in melting point is well represented by the Gibbs-Thompson equation.

  17. Microsoft PowerPoint - SWL NERC status june 2009.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sandra Spence * SPA Gary Cox * SWD Sherman Jones * NWD Karl Bryan * MVD Jeff Artman 5 COE Status of NERC Compliance * Current Level of USACE compliance varies per District. ...

  18. Renzo Tomellini, EC Directorate General for Research and innovation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ...Animateurs: Jeff Skeer, DOE Office of Policy and International Affairs and Renzo Tomellini, EC Directorate General for Research and Innovation Edward Jones, Lawrence Livermore ...

  19. Many Voices Working for the Community

    Office of Environmental Management (EM)

    Management (OREM) and ORSSAB DDFO Jeff Crane (for Connie Jones), Environmental ... can be made to accommodate the group. Mr. Crane - Regarding the May budget workshop, EPA ...

  20. Many Voices Working for the Community

    Office of Environmental Management (EM)

    Environment and Conservation (TDEC) Jeff Crane (for Connie Jones), Environmental ... Exact dates for the workshop will be provided to the board when established. Mr. Crane - ...

  1. Intense X-rays expose tiny flaws in 3-D printed titanium that can lead to

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    breakage over time | Argonne National Laboratory Intense X-rays expose tiny flaws in 3-D printed titanium that can lead to breakage over time By Katie Elyce Jones * March 4, 2016 Tweet EmailPrint Titanium is strong but light - a desirable property among metals. In the twentieth century, titanium was used in military aircraft and equipment and commercial jets. Today, we find this tough and flexible metal all around us - in sports gear, tools, surgical and dental implants, prosthetics,

  2. High-accuracy calculations of sixteen collision integrals for Lennard-Jones (12–6) gases and their interpolation to parameterize neon, argon, and krypton

    SciTech Connect (OSTI)

    Kim, Sun Ung; Monroe, Charles W.

    2014-09-15

    The inverse problem of parameterizing intermolecular potentials given macroscopic transport and thermodynamic data is addressed. Procedures are developed to create arbitrary-precision algorithms for transport collision integrals, using the Lennard-Jones (12–6) potential as an example. Interpolation formulas are produced that compute these collision integrals to four-digit accuracy over the reduced-temperature range 0.3≤T{sup ⁎}≤400, allowing very fast computation. Lennard-Jones parameters for neon, argon, and krypton are determined by simultaneously fitting the observed temperature dependences of their viscosities and second virial coefficients—one of the first times that a thermodynamic and a dynamic property have been used simultaneously for Lennard-Jones parameterization. In addition to matching viscosities and second virial coefficients within the bounds of experimental error, the determined Lennard-Jones parameters are also found to predict the thermal conductivity and self-diffusion coefficient accurately, supporting the value of the Lennard-Jones (12–6) potential for noble-gas transport-property correlation.

  3. Jeff Chamberlain | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    his PhD in Physical Chemistry from the Georgia Institute of Technology. Topics Energy, Energy usage, Energy storage, Batteries Education Physical Chemistry, Ph.D., Georgia...

  4. In Conversation with Jeff Neaton

    ScienceCinema (OSTI)

    Jeff Neaton

    2010-09-01

    Jan. 22, 2010: Host Alice Egan of Berkeley Lab's Materials Sciences Division interviews scientists about their lives and work in language everyone can understand. Her guest Berkeley Lab's MIke Crommie.

  5. Neutronics qualification of the Jules Horowitz reactor fuel by interpretation of the VALMONT experimental program - Transposition of the uncertainties on the reactivity of JHR with JEF2.2 and JEFF3.1.1

    SciTech Connect (OSTI)

    Leray, O.; Hudelot, J. P.; Antony, M.; Doederlein, C.; Santamarina, A.; Bernard, D.; Vaglio-Gaudard, C.

    2011-07-01

    -dedicated interpretation tool: PIMS. The effect of energy meshes and evaluations put forward the JEFF3.1.1/SHEM scheme that leads to a better calculation of the reactivity effect of VALMONT samples. Then, in order to quantify the impact of the uncertainties linked to the basic nuclear data, their propagation from the cross section measurement to the final computational result was analysed in a rigorous way by using a nuclear data re-estimation method based on Gauss-Newton iterations. This study concludes that the prior uncertainties due to nuclear data (uranium, aluminium, beryllium and water) on the reactivity of the Begin Of Cycle (BOC) for the JHR core reach 1217 pcm at 2{sigma}. Now, the uppermost uncertainty on the JHR reactivity is due to aluminium. (authors)

  6. A density functional theory study of magneto-electric Jones birefringence of noble gases, furan homologues, and mono-substituted benzenes

    SciTech Connect (OSTI)

    Fahleson, Tobias; Norman, Patrick; Coriani, Sonia; Rizzo, Antonio; Rikken, Geert L. J. A.

    2013-11-21

    We report on the results of a systematic ab initio study of the Jones birefringence of noble gases, of furan homologues, and of monosubstituted benzenes, in the gas phase, with the aim of analyzing the behavior and the trends within a list of systems of varying size and complexity, and of identifying candidates for a combined experimental/theoretical study of the effect. We resort here to analytic linear and nonlinear response functions in the framework of time-dependent density functional theory. A correlation is made between the observable (the Jones constant) and the atomic radius for noble gases, or the permanent electric dipole and a structure/chemical reactivity descriptor as the para Hammett constant for substituted benzenes.

  7. Getting the Lead Out

    DOE R&D Accomplishments [OSTI]

    Gibson, Kerry

    2011-04-08

    Discarded electronics no longer pose an environmental hazard from lead solder thanks to a lead-free alternative developed at the Ames Laboratory.

  8. Robert H. Jones Jr.

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... defines HLW as: "the highly radioactive waste material resulting from the reprocessing of spent nuclear fuel, including liquid waste produced directly in reprocessing and any solid ...

  9. John Paul Jones

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Opportunities ESnet Staff & Org Chart Administration Advanced Network Technologies Cybersecurity Infrastructure, Identity & Collaboration Network Engineering Office of the CTO...

  10. Strength of semiconductors, metals, and ceramics evaluated by a microscopic cleavage model with Morse-type and Lennard-Jones-type interaction

    SciTech Connect (OSTI)

    Hess, Peter

    2014-08-07

    An improved microscopic cleavage model, based on a Morse-type and Lennard-Jones-type interaction instead of the previously employed half-sine function, is used to determine the maximum cleavage strength for the brittle materials diamond, tungsten, molybdenum, silicon, GaAs, silica, and graphite. The results of both interaction potentials are in much better agreement with the theoretical strength values obtained by ab initio calculations for diamond, tungsten, molybdenum, and silicon than the previous model. Reasonable estimates of the intrinsic strength are presented for GaAs, silica, and graphite, where first principles values are not available.

  11. VOLUMETRIC LEAD ASSAY

    SciTech Connect (OSTI)

    M.A. Ebadian, Ph.D.; S.K. Dua; David Roelant; Sachin Kumar

    2001-01-01

    This report describes a system for handling and radioassay of lead, consisting of a robot, a conveyor, and a gamma spectrometer. The report also presents a cost-benefit analysis of options: radioassay and recycling lead vs. disposal as waste.

  12. Highly anisotropic exchange interactions of jeff=12 iridium moments on the fcc lattice in La2BIrO6 (B=Mg,Zn)

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Aczel, A. A.; Cook, A. M.; Williams, T. J.; Calder, S.; Christianson, A. D.; Cao, G. -X.; Mandrus, D.; Kim, Yong-Baek; Paramekanti, A.

    2016-06-20

    Here we have performed inelastic neutron scattering (INS) experiments to investigate the magnetic excitations in the weakly distorted face-centered-cubic (fcc) iridate double perovskites Lamore » $_2$ZnIrO$_6$ and La$_2$MgIrO$_6$, which are characterized by A-type antiferromagnetic ground states. The powder inelastic neutron scattering data on these geometrically frustrated $$j_{\\rm eff}=1/2$$ Mott insulators provide clear evidence for gapped spin wave excitations with very weak dispersion. The INS results and thermodynamic data on these materials can be reproduced by conventional Heisenberg-Ising models with significant uniaxial Ising anisotropy and sizeable second-neighbor ferromagnetic interactions. Such a uniaxial Ising exchange interaction is symmetry-forbidden on the ideal fcc lattice, so that it can only arise from the weak crystal distortions away from the ideal fcc limit. This may suggest that even weak distortions in $$j_{\\rm eff}=1/2$$ Mott insulators might lead to strong exchange anisotropies. More tantalizingly, however, we find an alternative viable explanation of the INS results in terms of spin models with a dominant Kitaev interaction. In contrast to the uniaxial Ising exchange, the highly-directional Kitaev interaction is a type of exchange anisotropy which is symmetry-allowed even on the ideal fcc lattice. The Kitaev model has a magnon gap induced by quantum order-by-disorder, while weak anisotropies of the Kitaev couplings generated by the symmetry-lowering due to lattice distortions can pin the order and enhance the magnon gap. In conclusion, our findings highlight how even conventional magnetic orders in heavy transition metal oxides may be driven by highly-directional exchange interactions rooted in strong spin-orbit coupling.« less

  13. Lead carbonate scintillator materials

    DOE Patents [OSTI]

    Derenzo, Stephen E.; Moses, William W.

    1991-01-01

    Improved radiation detectors containing lead carbonate or basic lead carbonate as the scintillator element are disclosed. Both of these scintillators have been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to other known scintillator materials. The radiation detectors disclosed are favorably suited for use in general purpose detection and in medical uses.

  14. lead paint chart

    Office of Environmental Management (EM)

    1930 Assume Lead Will WX Disturb Paint? No Yes Will WX Disturb More than 2 ft 2 . per Room? Yes HUD Housing or Using HUD ? Yes More than 50ugm 3 ? No LSW & HUD Rule 35.900 **...

  15. Lead carbonate scintillator materials

    DOE Patents [OSTI]

    Derenzo, S.E.; Moses, W.W.

    1991-05-14

    Improved radiation detectors containing lead carbonate or basic lead carbonate as the scintillator element are disclosed. Both of these scintillators have been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to other known scintillator materials. The radiation detectors disclosed are favorably suited for use in general purpose detection and in medical uses. 3 figures.

  16. Microsoft Word - Jeff_Miller_IACT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Miller Argonne National Laboratory Chemical Sciences and Engineering Division 9700 S. Cass Ave, Building 200 Argonne, IL 60429-4837 Phone: (630) 252-1928 E-mail: millerjt@anl.gov...

  17. Jeff Griffin, Ph. D. Associate Laboratory Director

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jay Tilden Associate Administrator and Deputy Under Secretary for Counterterrorism and Counterproliferation Our Leadership Since April 2016, Mr. Tilden has served as the Associate Administrator for Counterterrorism and Counterproliferation with responsibility in preparing for, responding to, and successfully resolving nuclear and radiological accidents and incidents worldwide. The mission scope includes providing expertise, technically informed policy recommendations required to advance U.S.

  18. Jeff Chamberlain, External Integration Officer | JCESR

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chamberlain conducted industrial research at several companies, notably Cabot Microelectronics, Nalco Company and Angus Chemical (owned by The Dow Chemical Company). He...

  19. Slide 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jon Engel (UNC) N Astro Dan Kasen (UCB), Tomasz Plewa (FSU) Expt: Heavy Ions Jeff Porter (LBNL) Expt: MENP Richard Jones (UConn) Nuclear Data Alejandro Sonzogni (BNL) N Accel....

  20. Secretary's Award of Excellence | Department of Energy

    Office of Environmental Management (EM)

    Award of Excellence Secretary's Award of Excellence (from left to right) Daniel Poneman; Chad Henderson; Jeff Pitman; Marc Jones; Daniel Lehman; Ingrid Kolb (from left to right) Daniel Poneman; Chad Henderson; Jeff Pitman; Marc Jones; Daniel Lehman; Ingrid Kolb Presented to: The Office of Science's Physical Sciences Facility (PSF) Project For demonstrating exceptional results in completing this complex $224 million project. The Pacific Northwest National Laboratory (PNNL) was facing the loss of

  1. LEAD SEVERING CONTRIVANCE

    DOE Patents [OSTI]

    Widmaier, W.

    1958-04-01

    A means for breaking an electrical circuit within an electronic tube during the process of manufacture is described. Frequently such circuits must be employed for gettering or vapor coating purposes, however, since an external pair of corector pins having no use after manufacture, is undesirable, this invention permits the use of existing leads to form a temporary circuit during manufacture, and severing it thereafter. One portion of the temporary circuit, made from a springy material such as tungsten, is spot welded to a fusable member. To cut the circuit an external radiant heat source melts the fusable member, allowing the tensed tungsten spring to contract and break the circuit. This inexpensive arrangement is particularly useful when the tube has a great many external leads crowded into the tube base.

  2. Generating Energy Efficiency Project Leads and Allocating Leads to

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Contractors | Department of Energy Energy Efficiency Project Leads and Allocating Leads to Contractors Generating Energy Efficiency Project Leads and Allocating Leads to Contractors Better Buildings Residential Network Peer Exchange Call Series: Generating Energy Efficiency Project Leads and Allocating Leads to Contractors, Call Slides and Discussion Summary, February 26, 2015. Call Slides and Discussion Summary (2.1 MB) More Documents & Publications Unique Fee-for-Service Revenues Think

  3. Generating Energy Efficiency Project Leads and Allocating Leads...

    Energy Savers [EERE]

    Generating Energy Efficiency Project Leads and Allocating Leads to Contractors Better Buildings Residential Network Peer Exchange Call Series: Generating Energy Efficiency Project ...

  4. A Qualitative Comparison of the C-Ring Test and the Jones Test as Standard Practice Test Methods for Studying Stress Corrosion Cracking in Ferritic Steels

    SciTech Connect (OSTI)

    Thomson, Jeffery K; Pawel, Steven J

    2015-01-01

    Creep-strength-enhanced-ferritic (CSEF) steels have been widely implemented as water wall alloy materials in the coal-fired power industry for many years. The stress corrosion cracking (SCC) behavior of this class of materials is currently of significant interest to the industry due to recent failures. To better understand the test methods used to characterize SCC behavior in the laboratory, three representative CSEF alloys (T23, T24, and T92) were subjected to two SCC test protocols: the Jones Test set forth in DIN 50915, and the C-ring SCC test set forth in ASTM G38-01. Samples were tested in either the as-received (normalized + tempered) condition or in the normalized condition (quenched from 1065 C). Samples were exposed to aerated water in one test case and de-aerated water in a second test case for a period of 7 days at 200 C. It was found that for both test protocols, the normalized condition with aerated water led to severe cracking for all three alloys, whereas no evidence of cracking was found for the other conditions.

  5. Home refinishing, lead paint, and infant blood lead levels

    SciTech Connect (OSTI)

    Rabinowitz, M.; Leviton, A.; Bellinger, D.

    1985-04-01

    The blood lead levels of 249 infants were measured semi-annually from birth to two years of age; the home paint was sampled and any recent home refinishing activity recorded. Mean blood lead from birth to age 2 years did not vary systematically with age but did correlate significantly with the amount of lead in the indoor paint. Refinishing activity in homes with high lead paint was associated with elevations of blood lead averaging 69 per cent.

  6. Sean Jones | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    of Energy Presentation given at the 2007 Diesel Engine-Efficiency & Emissions Research Conference (DEER 2007). 13-16 August, 2007, Detroit, Michigan. Sponsored by the U.S. Department of Energy's (DOE) Office of FreedomCAR and Vehicle Technologies (OFCVT). deer07_blau.pdf (1.73 MB) More Documents & Publications Vehicle Technologies Office: 2014 Fuel and Lubricant Technologies R&D Annual Progress Report Vehicle Technologies Office Merit Review 2015: Development of High Power

  7. Breakthrough: Lead-free Solder

    ScienceCinema (OSTI)

    Anderson, Iver

    2013-03-01

    Ames Laboratory senior metallurgist Iver Anderson explains the importance of lead-free solder in taking hazardous lead out of the environment by eliminating it from discarded computers and electronics that wind up in landfills. Anderson led a team that developed a tin-silver-copper replacement for traditional lead-tin solder that has been adopted by more than 50 companies worldwide.

  8. Lead-based paint assessment

    SciTech Connect (OSTI)

    Lorie, C.; Cowdery, J.W.

    1994-12-31

    In 1977, The US consumer product safety commission banned the use of lead-based paint (LBP) in all industries, except the maritime industry which still has certain privileged uses. Unfortunately for property and building owners, the ban did not come soon enough. In response to this heightened awareness, several environmental market sectors addressing the issues have emerged. These include: residential; soil; commercial; water; and structures. The first and most important step in addressing the concerns posed by the existence of lead based contamination is to quantify the amount of lead-based product, to determine the location of the lead based product and the extent, if any, of lead based contamination, and to make recommendations for the remediation or abatement of the lead product and resultant contamination. In narrowing the focus of these issues, this paper discusses lead-based paint assessment; preparing and organizing the assessment, the regulatory considerations, assessment methodology, and presentation of results.

  9. One Vaccine Leads to Another

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy One Thing Leads to Another: How NETL Research Saves Lives One Thing Leads to Another: How NETL Research Saves Lives August 8, 2013 - 10:57am Addthis One Thing Leads to Another: How NETL Research Saves Lives Learn More The coronary stent was developed as part of NETL's Technology Transfer program. NETL's technology portfolio contains a broad range of innovations that have resulted from research in areas such as carbon capture and sequestration, mercury capture, fuel cells, sensors and

  10. One Vaccine Leads to Another

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    One Vaccine Leads to Another Print Diphtheria is a potentially lethal respiratory disease that is fairly well controlled by vaccines discovered early last century. These vaccines...

  11. High temperature superconductor current leads

    DOE Patents [OSTI]

    Hull, John R.; Poeppel, Roger B.

    1995-01-01

    An electrical lead having one end for connection to an apparatus in a cryogenic environment and the other end for connection to an apparatus outside the cryogenic environment. The electrical lead includes a high temperature superconductor wire and an electrically conductive material distributed therein, where the conductive material is present at the one end of the lead at a concentration in the range of from 0 to about 3% by volume, and at the other end of the lead at a concentration of less than about 20% by volume. Various embodiments are shown for groups of high temperature superconductor wires and sheaths.

  12. High temperature superconductor current leads

    DOE Patents [OSTI]

    Hull, J.R.; Poeppel, R.B.

    1995-06-20

    An electrical lead is disclosed having one end for connection to an apparatus in a cryogenic environment and the other end for connection to an apparatus outside the cryogenic environment. The electrical lead includes a high temperature superconductor wire and an electrically conductive material distributed therein, where the conductive material is present at the one end of the lead at a concentration in the range of from 0 to about 3% by volume, and at the other end of the lead at a concentration of less than about 20% by volume. Various embodiments are shown for groups of high temperature superconductor wires and sheaths. 9 figs.

  13. Lead-free primary explosives

    DOE Patents [OSTI]

    Huynh, My Hang V.

    2010-06-22

    Lead-free primary explosives of the formula (cat).sub.Y[M.sup.II(T).sub.X(H.sub.2O).sub.6-X].sub.Z, where T is 5-nitrotetrazolate, and syntheses thereof are described. Substantially stoichiometric equivalents of the reactants lead to high yields of pure compositions thereby avoiding dangerous purification steps.

  14. NATIONAL LEAD COMPANY OF OHIO

    Office of Legacy Management (LM)

    8 Radiatlon Dept. 3 Water Treatment Plant (Far W&or Spnphs Only) NILHhS-1?6 (RFV lO... 8 Radiation Dept. 3 Water Treotmnt Plant (Fw Wkr bnplos Only) NATIONAL. LEAD ...

  15. One Vaccine Leads to Another

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    One Vaccine Leads to Another One Vaccine Leads to Another Print Friday, 24 May 2013 11:19 Diphtheria is a potentially lethal respiratory disease that is fairly well controlled by vaccines discovered early last century. These vaccines have been extremely effective; studies on one vaccine in particular, the nontoxic form of the diphtheria toxin (DT), have informed other vaccines. Recently, researchers at Novartis GNF solved several structures of a nontoxic DT using data obtained at ALS Beamline

  16. Industrial lead paint removal specifications

    SciTech Connect (OSTI)

    Stone, R.C.

    1997-06-01

    The purpose of this paper is to inform the reader as to some of the pertinent rules and regulations promulgated by the Environmental Protection Agency (EPA) and the Occupational Safety and Health Administration (OSHA) that may effect an industrial lead paint removal project. The paper discusses a recommended schedule of procedures and preparations to be followed by the lead paint removal specification writer when analyzing the possible impact of the project on the environment, the public and workers. Implications of the Clean Air Act, the Clean Water Act and the Resource Conservation and Recovery Act (RCRA) along with hazardous waste handling, manifesting, transporting and disposal procedures are discussed with special emphasis placed as to their impact on the writer and the facility owner. As the rules and regulations are highly complex, the writer has attempted to explain the methodology currently being used in state-of-the-art industrial lead abatement specifications.

  17. Leading the Charge: Christine Klein

    Office of Energy Efficiency and Renewable Energy (EERE)

    Change doesn’t happen on its own. It’s led by dedicated and passionate people who are committed to empowering Indian Country to energize future generations. Leading the Charge is a regular Office of Indian Energy newsletter feature spotlighting the movers and shakers in energy development on tribal lands. In this issue, we talk to Christine Klein, an adopted Haida who is leading efforts to help Alaska Native villages address their energy challenges in her role as Vice President and Chief Operating Officer of the Calista Corporation.

  18. NATIONAL LEAD COMPANY OF OHIO

    Office of Legacy Management (LM)

    t-t AL- 1. + T fi r,y* t ,.- . NATIONAL LEAD COMPANY OF OHIO Ofll i iy Ci)wp HEALTH AND SAFETY DIVISION - ANALYTICAL DEPT. ANALYTICAL DATA SHEET U-G b ;33y jl:tL G c-w &3(y I...

  19. Soluble Lead Flow Battery: Soluble Lead Flow Battery Technology

    SciTech Connect (OSTI)

    2010-09-01

    GRIDS Project: General Atomics is developing a flow battery technology based on chemistry similar to that used in the traditional lead-acid battery found in nearly every car on the road today. Flow batteries store energy in chemicals that are held in tanks outside the battery. When the energy is needed, the chemicals are pumped through the battery. Using the same basic chemistry as a traditional battery but storing its energy outside of the cell allows for the use of very low cost materials. The goal is to develop a system that is far more durable than today’s lead-acid batteries, can be scaled to deliver megawatts of power, and which lowers the cost of energy storage below $100 per kilowatt hour.

  20. One Vaccine Leads to Another

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    One Vaccine Leads to Another Print Diphtheria is a potentially lethal respiratory disease that is fairly well controlled by vaccines discovered early last century. These vaccines have been extremely effective; studies on one vaccine in particular, the nontoxic form of the diphtheria toxin (DT), have informed other vaccines. Recently, researchers at Novartis GNF solved several structures of a nontoxic DT using data obtained at ALS Beamline 5.0.3, resolving a long-standing scientific puzzle and

  1. NATIONAL LEAD COMPANY OF OHIO

    Office of Legacy Management (LM)

    ~y-f-hjLo-- yy; 4: j ).,Ic +- NATIONAL LEAD COMPANY OF OHIO s _ HEALTH AND SAFETY DIVISION - ANALYTICAL DEPT. . ANALYTICAL DATA SHEET o-0 1. H. NO. TRIAL, HYGIENE AND RADIATION DEPT. AMPLE Nti.1. //- 6:itEC TEDI it/;/L 5 .,- -..-- -- -.._-. -. I --- --- 1 ANALYTICA .OATE RECeiVEDi mri /-2-v& 3 Li >,a. HCJ _-..k.-*..- -.v._ 1 NO. DISTRIBUTION OF COPIES 1 Analytlcal Labwatwy (RECORD COPP) 2 Industrial Hygiene 8 Radlation Dept. . 3' Water Treatment Plant (Far Water Smmplos Only)' t' , /,' 30

  2. What is lead-based paint

    SciTech Connect (OSTI)

    Vernon, L.S.

    1994-03-01

    The number of variety of lead-abatement regulations and requirements make it difficult and confusing to identify and properly respond to dangerous levels of lead in every situation. Definitions of lead-based paint'' and three test methods for lead detection are described to help determine when and how to test for the presence of lead.

  3. NATIONAL LEAD COMPANY OF OHIO

    Office of Legacy Management (LM)

    t-t AL- 1. + T fi r,y* t ,.- . NATIONAL LEAD COMPANY OF OHIO Of~~l=l i iy Ci)wp HEALTH AND SAFETY DIVISION - ANALYTICAL DEPT. ANALYTICAL DATA SHEET U-G b ;33y jl:tL G c-w &3(/y I 53 .3 Y5 .y j.os-- ! stz77y t3r1: my I CLvru' f<? 3;/ ' > j!OS ! I I I 1 P-/) ' If I , m 6.3 Lg- /&IL -q-&.+&L, /I a V Q/);: /(Lx 3L- NO. DISTRIBUTION OF COPIES 1 Analytical Laboratory (RECORD COPY) 2 Industrial Hygiene 8 Radiation Dept. Plnnt NLO-HbS-736 IREV. lo/:m4/601 - -_.-__- - ---

  4. Multi-lead heat sink

    DOE Patents [OSTI]

    Roose, L.D.

    1982-08-25

    The disclosure relates to a heat sink used to protect integrated circuits from the heat resulting from soldering them to circuit boards. A tubular housing contains a slidable member which engages somewhat inwardly extending connecting rods, each of which is rotatably attached at one end to the bottom of the housing. The other end of each rod is fastened to an expandable coil spring loop. As the member is pushed downward in the housing, its bottom edge engages and forces outward the connecting rods, thereby expanding the spring so that it will fit over an integrated circuit. After the device is in place, the member is slid upward and the spring contracts about the leads of the integrated circuit. Soldering is now conducted and the spring absorbs excess heat therefrom to protect the integrated circuit. The placement steps are repeated in reverse order to remove the heat sink for use again.

  5. Multi-lead heat sink

    DOE Patents [OSTI]

    Roose, L.D.

    1984-07-03

    The disclosure relates to a heat sink used to protect integrated circuits from the heat resulting from soldering them to circuit boards. A tubular housing contains a slidable member which engages somewhat inwardly extending connecting rods, each of which is rotatably attached at one end to the bottom of the housing. The other end of each rod is fastened to an expandable coil spring loop. As the member is pushed downward in the housing, its bottom edge engages and forces outward the connecting rods, thereby expanding the spring so that it will fit over an integrated circuit. After the device is in place, the member is slid upward and the spring contracts about the leads of the integrated circuit. Soldering is now conducted and the spring absorbs excess heat therefrom to protect the integrated circuit. The placement steps are repeated in reverse order to remove the heat sink for use again. 4 figs.

  6. Multi-lead heat sink

    DOE Patents [OSTI]

    Roose, Lars D.

    1984-01-01

    The disclosure relates to a heat sink used to protect integrated circuits from the heat resulting from soldering them to circuit boards. A tubular housing contains a slidable member which engages somewhat inwardly extending connecting rods, each of which is rotatably attached at one end to the bottom of the housing. The other end of each rod is fastened to an expandable coil spring loop. As the member is pushed downward in the housing, its bottom edge engages and forces outward the connecting rods, thereby expanding the spring so that it will fit over an integrated circuit. After the device is in place, the member is slid upward and the spring contracts about the leads of the integrated circuit. Soldering is now conducted and the spring absorbs excess heat therefrom to protect the integrated circuit. The placement steps are repeated in reverse order to remove the heat sink for use again.

  7. Lead phosphate glass compositions for optical components

    DOE Patents [OSTI]

    Sales, Brian C.; Boatner, Lynn A.

    1987-01-01

    A lead phosphate glass to which has been added indium oxide or scandium oe to improve chemical durability and provide a lead phosphate glass with good optical properties.

  8. David Skinner Named NERSC Strategic Partnerships Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    David Skinner Named NERSC Strategic Partnerships Lead David Skinner Named NERSC Strategic Partnerships Lead January 24, 2014 Contact: Linda Vu, +1 510 495 2402, lvu@lbl.gov...

  9. Downregulation of Cinnamyl Alcohol Dehydrogenase (CAD) Leads...

    Office of Scientific and Technical Information (OSTI)

    (CAD) Leads to Improved Saccharification Efficiency in Switchgrass Citation Details In-Document Search Title: Downregulation of Cinnamyl Alcohol Dehydrogenase (CAD) Leads ...

  10. Distributed Generation Lead-by-Example Resources

    Broader source: Energy.gov [DOE]

    State governments can lead by example by promoting renewable energy programs and policies. Efforts to lead by example include using renewable energy resources (including alternative fuel for...

  11. Heavy Isotopes Lead Materials Management Organization (LMMO)...

    Office of Scientific and Technical Information (OSTI)

    Heavy Isotopes Lead Materials Management Organization (LMMO) Update Citation Details In-Document Search Title: Heavy Isotopes Lead Materials Management Organization (LMMO) Update ...

  12. Low Emissions Asian Development (LEAD) Program - Bangladesh ...

    Open Energy Info (EERE)

    Low Emissions Asian Development (LEAD) Program - Bangladesh Redirect page Jump to: navigation, search REDIRECT Low Emissions Asian Development (LEAD) Program Retrieved from...

  13. Cities Leading through Energy Analysis and Planning

    Broader source: Energy.gov [DOE]

    The Cities Leading through Energy Analysis and Planning (Cities-LEAP) project delivers standardized, localized energy data and analysis that enables cities to lead clean energy innovation and...

  14. Dissolution of lead paint in aqueous solutions

    SciTech Connect (OSTI)

    Barnes, G.L.; Davis, A.P.

    1996-07-01

    An analysis of the rate and extent of lead leaching from a lead-based paint was completed. At low-solution pH, dissolution was rapid and approached 80% of the total lead. Residual lead can be estimated based on the predicted solubility of lead carbonate and basic lead carbonate. Release of lead from the paint was slower than that from pure basic lead carbonate due to inhibition by the paint matrix. Although the dissolved concentration of lead in solution at neutral/high pH was low, the paint binder was apparently destroyed at these pH values, releasing colloidal lead pigment particles. The presence of ethylenediaminetetraacetic acid (EDTA) and nitrilotriacetic acid (NTA) enhanced both the rate and degree of lead dissolution, while benzoic acid had a minimal effect.

  15. Sandia National Laboratories: Jeff Brinker elected a Fellow of...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for his innovative technologies in advanced materials and who has pioneered the field of sol-gel processing. His nanoparticle technologies, engineering marvels, have a broad range...

  16. Mr. Jeff Dolven President and Chief Executive Officer Skookum...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (WSHP) in the areas of management and worker roles and responsibilities, processes for hazard identification and mitigation, employee training, injury reporting, and recordkeeping. ...

  17. Jeff Neaton > DirectorTheory of Nanostructured Materials Facility...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    properties of materials with good accuracy from scratch, i.e., through solution of the quantum mechanics of a system of interacting electrons in a field of nuclei. In recent...

  18. Jeff Broughton Named NERSC Division Deputy for Operations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NERSC Division Deputy for Operations. The announcement was made Aug. 15 by NERSC Division Director Sudip Dosanjh. "Rather than this being a new position, the Division Deputy title...

  19. Jeff Koplow Awarded SunShot Innovation Fellowship

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Awarded SunShot Innovation Fellowship - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management Programs

  20. Oregon Senator Jeff Merkley to Visit Surprise Valley Electrification...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Following completion and flow testing of the wells, SVEC plans to size and design power plant appropriate for the geothermal resource. This project is one of the first of its...

  1. Nazim Bharmal Anthony Slingo Jeff Settle Gary Robinson Helen...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the TOA radiances every 15 min from Geostationary Earth Radiation Budget (GERB). * Edwards-Slingo RT code used to calculate consistent flux components. * Or, use measurements...

  2. A Little Can of Sunshine: Don Hillebrand and Jeff Chamberlain...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chamberlain is the leader of the laboratory-wide Energy Storage Initiative at Argonne National Laboratory, which is developing solutions for both electric cars and the power grid....

  3. Jeff Lab director plans retirement (Daily Press) | Jefferson...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    he planned to retire, pending the hiring of a new director. Leemann is a native of Switzerland who came to the U.S. in 1970 for a position at the Lawrence Berkeley Lab in...

  4. Results from the Cooler and Lead Tests

    SciTech Connect (OSTI)

    Green, Michael A

    2010-06-10

    The report presents the results of testing MICE spectrometer magnet current leads on a test apparatus that combines both the copper leads and the high temperature superconducting (HTS) leads with a single Cryomech PT415 cooler and liquid helium tank. The current is carried through the copper leads from 300 K to the top of the HTS leads. The current is then carried through the HTS leads to a feed-through from the vacuum space to the inside of a liquid helium tank. The experiment allows one to measure the performance of both cooler stages along with the performance of the leads. While the leads were powered we measured the voltage drops through the copper leads, through the HTS leads, through spliced to the feed-through, through the feed-through and through the low-temperature superconducting loop that connects one lead to the other. Measurements were made using the leads that were used in spectrometer magnet 1A and spectrometer magnet 2A. These are the same leads that were used for Superbend and Venus magnets at LBNL. The IL/A for these leads was 5.2 x 10{sup 6} m{sup -1}. The leads turned out to be too long. The same measurements were made using the leads that were installed in magnet 2B. The magnet 2B leads had an IL/A of 3.3 x 10{sup 6} A m{sup -1}. This report discusses the cooler performance and the measured electrical performance of the lead circuit that contains the copper leads and the superconducting leads. All of the HTS leads that were installed in magnet 2B were current tested using this apparatus.

  5. High-temperature superconducting current leads

    SciTech Connect (OSTI)

    Niemann, R.C.

    1995-03-01

    Use of high-temperature superconductors (HTSs) for current leads to deliver power to devices at liquid helium temperature can reduce refrigeration requirements to values significantly below those achievable with conventional leads. HTS leads are now near commercial realization. Argonne National Laboratory (ANL) has developed a sinter-forge process to fabricate current leads from bismuth-based superconductors. The current-carrying capacity of these leads is five times better than that of HTS leads made by a conventional fabrication process. ANL along with Superconductivity, Inc., has developed a 1500 ampere current lead for an existing superconducting magnetic energy storage (SMES) device. With Babcock & Wilcox Company, Argonne is creating 16-kiloampere leads for use in a 0.5 MWh SMES. In a third project Argonne performed characterization testing of a existing, proprietary conduction-cooled lead being developed by Zer Res Corp.

  6. University Competition Leads to Geothermal Breakthroughs

    Broader source: Energy.gov [DOE]

    Learn how students are leading groundbreaking research to help expand the development of America's vast geothermal energy resources.

  7. Prabhat Steps In as DAS Group Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Prabhat Steps In as DAS Group Lead Prabhat Steps In as DAS Group Lead September 1, 2014 prabhat Prabhat has been named Group Lead of the Data and Analytics Services (DAS) Group at the Department of Energy's National Energy Research Scientific Computing Center (NERSC). The DAS group helps NERSC's users address data and analytics challenges arising from the increasing size and complexity of data from simulations and experiments. As the DAS Group Lead, Prabhat will play a key role in developing and

  8. Clean Lead Facility (CLF) Inventory System

    Energy Science and Technology Software Center (OSTI)

    1995-07-13

    The CLF Inventory System records shipments of clean or nonradioactive contaminated lead stored at the CLF. The Inventory System provides reports and inventory information to Facility operators. Annual, quarterly, monthly, and current inventory reports may be printed. Profile reports of each shipment of lead may also be printed for verification and documentation of lead transactions.

  9. Apparatus and methods for purifying lead

    DOE Patents [OSTI]

    Tunison, Harmon M.

    2016-01-12

    Disclosed is an exemplary method of purifying lead which includes the steps of placing lead and a fluoride salt blend in a container; forming a first fluid of molten lead at a first temperature; forming a second fluid of the molten fluoride salt blend at a second temperature higher than the first temperature; mixing the first fluid and the second fluid together; separating the two fluids; solidifying the molten fluoride salt blend at a temperature above a melting point of the lead; and removing the molten lead from the container. In certain exemplary methods the molten lead is removed from the container by decanting. In still other exemplary methods the molten salt blend is a Lewis base fluoride eutectic salt blend, and in yet other exemplary methods the molten salt blend contains sodium fluoride, lithium fluoride, and potassium fluoride.

  10. David Skinner Named NERSC Strategic Partnerships Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    David Skinner Named NERSC Strategic Partnerships Lead David Skinner Named NERSC Strategic Partnerships Lead January 24, 2014 Contact: Linda Vu, +1 510 495 2402, lvu@lbl.gov XBD201102-00089.jpg David Skinner This month, the National Energy Research Scientific Computing Center (NERSC) created a new position-Strategic Partnerships Lead, to identify new science communities that can benefit from NERSC resources. David Skinner, former head of NERSC's Outreach Software and Programming Group (OSP), has

  11. Wayne Jones | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    He entered Federal Civil Service as a Department of Defense (DoD) Information Technology ... Wayne is a certified DoD Chief Information Officer and Acquisition Program Manager for ...

  12. Property:LeadAgency | Open Energy Information

    Open Energy Info (EERE)

    Subproperties This property has the following 1 subproperty: R RAPIDRoadmap9-FD-k Pages using the property "LeadAgency" Showing 25 pages using this property. (previous...

  13. Facilities Electrician & Lead Electrician | Princeton Plasma...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    performing electrical work: Electrician10 years; and LEAD Electrician15 years of experience required 2. Thorough understanding of the National Electric Code. 3. Demonstrated ...

  14. Construction Branch Electrician & Lead Electrician | Princeton...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Construction Branch Electrician & Lead Electrician Department: Engineering Supervisor(s): ... devices, and assist with the construction and repair of facilities on the PPPL campus. ...

  15. Hazen Named Storage Systems Group Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hazen Named Storage Systems Group Lead Hazen Named Storage Systems Group Lead May 10, 2016 Damian Hazen Damian Hazen Damian Hazen, who has been with NERSC since 2001, has been named group lead for the Storage Systems Group. Hazen has been acting lead since last October, taking over for Jason Hick, who recently left NERSC to take a position at Los Alamos National Laboratory. During his time at NERSC, Hazen has worked primarily in the Storage Systems Group as an administrator and programmer for

  16. Compatibility of PETN with lead azide

    SciTech Connect (OSTI)

    Hurd, R.; Fronabarger, J.W.; Johnson, R.; Fleming, W.

    1983-01-01

    The compatibility of PETN with lead azide at elevated temperatures has been investigated. Ramped and isothermal DSC methods were used to obtain energies of activation at temperatures above the melting point of PETN. Mixtures were found to show exothermic activity at lower temperatures than pure PETN. High Pressure Liquid Chromatography was used to follow the decomposition of PETN and PETN/lead azide mixtures at temperatures below the melting point. Reaction below 120/sup 0/C appeared minimal, while at higher temperatures, both PETN and PETN/lead azide mixtures showed degradation. A PETN/lead azide sample exploded at or near the melting point of PETN.

  17. LEAD SUBSTITUTION AND ELIMINATION STUDY, PART II

    SciTech Connect (OSTI)

    T. MARTINEZ; M. COURNOYER

    2001-01-01

    Within the Nuclear Materials Technology Division of Los Alamos National Laboratory, lead is used as shielding for a variety of operations, including actinide chemistry, weapons production, radiochemistry, and analytical chemistry. In this study, waste minimization issues associated with replacing lead shielding with non-hazardous materials are addressed. These include institutional program available to support this effort, the hazards and accompanying controls grouped with lead shielding, operations that use lead bricks and how this effects the selection of the substitute. Life cycle management issues are also examined. As a final step, an approach to get buy-in from both technical and budget minded employees is presented.

  18. SBA recognizes Pantex as a leader | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    Back row from left, Frances Tillery, Barbara Smith, Teresa Albus, Jeff Gillmore, Tammi ... can contract," said Compliance team lead Barbara Smith. Read more on the Pantex website. ...

  19. Managing lead-based paint abatement wastes

    SciTech Connect (OSTI)

    Steele, N.L.C.

    1994-12-31

    Renovation, remodeling, demolition, and surface preparation for painting, in addition to specified lead abatement, are all activities that have the potential to produce hazardous wastes if a property was painted with lead-based paint. Lead-based paint was used on residential structures until 1978, when most residential uses were banned by the Consumer Products Safety Council. Prior to the 1950s, paints for residential uses may have contained up to 50% lead by weight. Today, commercial and military paints may still contain lead and can be used on non-residential structures. The lead content of residential paints is limited to 0.06% lead (by weight) in the dried film. This paper provides an overview of some of the information needed to properly manage lead-based paint abatement wastes. The issues covered in this paper include waste classification, generator status, treatment, and land disposal restrictions. The author assumes that the reader is familiar with the provision of the Health and Safety Code and the California Code of Regulations that pertain to generation and management of hazardous wastes. Citations provided herein do not constitute an exhaustive list of all the regulations with which a generator of hazardous waste must comply.

  20. Distributed electrical leads for thermionic converter

    DOE Patents [OSTI]

    Fitzpatrick, Gary O.; Britt, Edward J.

    1979-01-01

    In a thermionic converter, means are provided for coupling an electrical lead to at least one of the electrodes thereof. The means include a bus bar and a plurality of distributed leads coupled to the bus bar each of which penetrates through one electrode and are then coupled to the other electrode of the converter in spaced apart relation.

  1. Fan-fold shielded electrical leads

    DOE Patents [OSTI]

    Rohatgi, Rajeev R.; Cowan, Thomas E.

    1996-01-01

    Fan-folded electrical leads made from copper cladded Kapton, for example, with the copper cladding on one side serving as a ground plane and the copper cladding on the other side being etched to form the leads. The Kapton is fan folded with the leads located at the bottom of the fan-folds. Electrical connections are made by partially opening the folds of the fan and soldering, for example, the connections directly to the ground plane and/or the lead. The fan folded arrangement produces a number of advantages, such as electrically shielding the leads from the environment, is totally non-magnetic, and has a very low thermal conductivity, while being easy to fabricate.

  2. Fan-fold shielded electrical leads

    DOE Patents [OSTI]

    Rohatgi, R.R.; Cowan, T.E.

    1996-06-11

    Disclosed are fan-folded electrical leads made from copper cladded Kapton, for example, with the copper cladding on one side serving as a ground plane and the copper cladding on the other side being etched to form the leads. The Kapton is fan folded with the leads located at the bottom of the fan-folds. Electrical connections are made by partially opening the folds of the fan and soldering, for example, the connections directly to the ground plane and/or the lead. The fan folded arrangement produces a number of advantages, such as electrically shielding the leads from the environment, is totally non-magnetic, and has a very low thermal conductivity, while being easy to fabricate. 3 figs.

  3. Cryogenic Current Lead Analysis Model Program

    Energy Science and Technology Software Center (OSTI)

    1992-01-01

    CCLAMP was developed to provide a tool for tha analysis of superconducting or normal current leads used to supply electricity from a warm interface (usually room temperature) to a device at cryogenic temperatures. It determines the heat leak to the cryogenic connection and the mass flow of the cryogen (typically helium) for the lead and installation modelled. It may be used to thermally optimize a lead design for a particular application. The user provides relevantmore » geometry details to model the electrical (length, diameter, superconducting length) and heat exchanger design of the lead (heat transfer coefficient, heat transfer area). It has a transient analysis capability so that lead transients such as cool down, current ramping, flow disruptions, and control simulations can be performed.« less

  4. Lead Coolant Test Facility Development Workshop

    SciTech Connect (OSTI)

    Paul A. Demkowicz

    2005-06-01

    A workshop was held at the Idaho National Laboratory on May 25, 2005, to discuss the development of a next generation lead or lead-alloy coolant test facility. Attendees included representatives from the Generation IV lead-cooled fast reactor (LFR) program, Advanced Fuel Cycle Initiative, and several universities. Several participants gave presentations on coolant technology, existing experimental facilities for lead and lead-alloy research, the current LFR design concept, and a design by Argonne National Laboratory for an integral heavy liquid metal test facility. Discussions were focused on the critical research and development requirements for deployment of an LFR demonstration test reactor, the experimental scope of the proposed coolant test facility, a review of the Argonne National Laboratory test facility design, and a brief assessment of the necessary path forward and schedule for the initial stages of this development project. This report provides a summary of the presentations and roundtable discussions.

  5. Method for measuring lead concentrations in blood

    DOE Patents [OSTI]

    Nogar, Nicholas S.

    2001-01-01

    Method for measuring lead concentrations in blood. The present invention includes the use of resonant laser ablation to analyze .ltoreq.1 .mu.L (or equivalent mass) samples of blood for lead content. A typical finger prick, for example, yields about 10 .mu.L. Solid samples may also readily be analyzed by resonant laser ablation. The sample is placed on a lead-free, electrically conducting substrate and irradiated with a single, focused laser beam which simultaneously vaporizes, atomizes, and resonantly ionizes an analyte of interest in a sample. The ions are then sorted, collected and detected using a mass spectrometer.

  6. The risk of lead toxicity in homes with lead paint hazard

    SciTech Connect (OSTI)

    Schwartz, J.; Levin, R. )

    1991-02-01

    While lead paint has long been known to be a major source of lead poisoning, only a few small epidemiologic studies have attempted to assess directly the relative risk of lead poisoning due to the presence of lead paint. Using data from over 200,000 screening tests of children in the city of Chicago performed between 1976 and 1980, the relative risks can be quantified for children living in a major urban area. Lead paint was found to be a significant predictor of the probability of a child having lead toxicity. As expected, the reduction in leaded gasoline sales during the period reduced mean blood lead levels and increased the percentage of lead toxic children whose toxicity could be attributed to paint lead. Poisson regression models indicated that with the elimination of leaded gasoline, the relative risk of lead toxicity given lead paint exposure was 5.70 (95% CI, 4.13-7.86) during the winter and fall. The relative risk rose to 12.81 (95% CI, 7.33-22.4) in the spring and 15.8 (95% CI, 8.90-28.1) in the summer, probably due to increased exposure to window wells.

  7. Lightweight, durable lead-acid batteries

    DOE Patents [OSTI]

    Lara-Curzio, Edgar; An, Ke; Kiggans, Jr., James O; Dudney, Nancy J; Contescu, Cristian I; Baker, Frederick S; Armstrong, Beth L

    2013-05-21

    A lightweight, durable lead-acid battery is disclosed. Alternative electrode materials and configurations are used to reduce weight, to increase material utilization and to extend service life. The electrode can include a current collector having a buffer layer in contact with the current collector and an electrochemically active material in contact with the buffer layer. In one form, the buffer layer includes a carbide, and the current collector includes carbon fibers having the buffer layer. The buffer layer can include a carbide and/or a noble metal selected from of gold, silver, tantalum, platinum, palladium and rhodium. When the electrode is to be used in a lead-acid battery, the electrochemically active material is selected from metallic lead (for a negative electrode) or lead peroxide (for a positive electrode).

  8. Lightweight, durable lead-acid batteries

    SciTech Connect (OSTI)

    Lara-Curzio, Edgar; An, Ke; Kiggans, Jr., James O.; Dudney, Nancy J.; Contescu, Cristian I.; Baker, Frederick S.; Armstrong, Beth L.

    2011-09-13

    A lightweight, durable lead-acid battery is disclosed. Alternative electrode materials and configurations are used to reduce weight, to increase material utilization and to extend service life. The electrode can include a current collector having a buffer layer in contact with the current collector and an electrochemically active material in contact with the buffer layer. In one form, the buffer layer includes a carbide, and the current collector includes carbon fibers having the buffer layer. The buffer layer can include a carbide and/or a noble metal selected from of gold, silver, tantalum, platinum, palladium and rhodium. When the electrode is to be used in a lead-acid battery, the electrochemically active material is selected from metallic lead (for a negative electrode) or lead peroxide (for a positive electrode).

  9. Lead Hero Limited | Open Energy Information

    Open Energy Info (EERE)

    Hero Limited Jump to: navigation, search Name: Lead Hero Limited Place: China Product: China-based company that holds a 100% interest in XiAn Lv Jing and a 15.05% interest in...

  10. INEEL Lead Recycling in a Moratorium Environment

    SciTech Connect (OSTI)

    Kooda, K. E.; Galloway, K.; McCray, C. W.; Aitken, D. W.

    2003-02-26

    Since 1999, the Idaho National Engineering and Environmental Laboratory (INEEL) Lead Project successfully recycled over 700,000 pounds of excess INEEL lead to the private sector. On February 14, 2000, the Secretary of Energy, Bill Richardson, formalized the January 12, 2000, moratorium on recycling radioactive scrap metal that prevented the unrestricted release of recycled scrap metals to the private sector. This moratorium created significant problems for the INEEL lead recycling program and associated plans; however, through the cooperative efforts of the INEEL and Idaho State University as well as innovative planning and creative thinking the recycling issues were resolved. This collaboration has recycled over 160,000 pounds of excess lead to Idaho State University with a cost savings of over $.5M.

  11. INEEL Lead Recycling in a Moratorium Environment

    SciTech Connect (OSTI)

    Kooda, Kevin Evan; Mc Cray, Casey William; Aitken, Darren William; Galloway, Kelly

    2003-02-01

    Since 1999, the Idaho National Engineering and Environmental Laboratory (INEEL) Lead Project successfully recycled over 700,000 pounds of excess INEEL lead to the private sector. On February 14, 2000, the Secretary of Energy, Bill Richardson, formalized the January 12, 2000, moratorium on recycling radioactive scrap metal that prevented the unrestricted release of recycled scrap metals to the private sector. This moratorium created significant problems for the INEEL lead recycling program and associated plans; however, through the cooperative efforts of the INEEL and Idaho State University as well as innovative planning and creative thinking the recycling issues were resolved. This collaboration has recycled over 160,000 pounds of excess lead to Idaho State University with a cost savings of over $.5M.

  12. Measurement of the production of neighbouring jets in lead-lead...

    Office of Scientific and Technical Information (OSTI)

    Measurement of the production of neighbouring jets in lead-lead collisions at sNN2.76 TeV with the ATLAS detector Citation Details In-Document Search Title: Measurement of the...

  13. Corrosion by liquid lead and lead-bismuth: experimental results review and analysis

    SciTech Connect (OSTI)

    Zhang, Jinsuo

    2008-01-01

    Liquid metal technologies for liquid lead and lead-bismuth alloy are under wide investigation and development for advanced nuclear energy systems and waste transmutation systems. Material corrosion is one of the main issues studied a lot recently in the development of the liquid metal technology. This study reviews corrosion by liquid lead and lead bismuth, including the corrosion mechanisms, corrosion inhibitor and the formation of the protective oxide layer. The available experimental data are analyzed by using a corrosion model in which the oxidation and scale removal are coupled. Based on the model, long-term behaviors of steels in liquid lead and lead-bismuth are predictable. This report provides information for the selection of structural materials for typical nuclear reactor coolant systems when selecting liquid lead or lead bismuth as heat transfer media.

  14. NERSC seeks Computational Systems Group Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    seeks Computational Systems Group Lead NERSC seeks Computational Systems Group Lead January 6, 2011 by Katie Antypas Note: This position is now closed. The Computational Systems Group provides production support and advanced development for the supercomputer systems at NERSC. Manage the Computational Systems Group (CSG) which provides production support and advanced development for the supercomputer systems at NERSC (National Energy Research Scientific Computing Center). These systems, which

  15. Nick Wright Named Advanced Technologies Group Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nick Wright Named Advanced Technologies Group Lead Nick Wright Named Advanced Technologies Group Lead February 4, 2013 Nick Nick Wright has been named head of the National Energy Research Scientific Computing Center's (NERSC) Advanced Technologies Group (ATG), which focuses on understanding the requirements of current and emerging applications to make choices in hardware design and programming models that best serve the science needs of NERSC users. ATG specializes in benchmarking, system

  16. Zerkle to lead LANL's Information Technology organization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Zerkle to lead Information Technology organization Zerkle to lead LANL's Information Technology organization Information Technology is responsible for departmental computing, software and software applications, and computing networks and infrastructure. March 14, 2011 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to

  17. Primer on lead-acid storage batteries

    SciTech Connect (OSTI)

    1995-09-01

    This handbook was developed to help DOE facility contractors prevent accidents caused during operation and maintenance of lead-acid storage batteries. Major types of lead-acid storage batteries are discussed as well as their operation, application, selection, maintenance, and disposal (storage, transportation, as well). Safety hazards and precautions are discussed in the section on battery maintenance. References to industry standards are included for selection, maintenance, and disposal.

  18. Properly engineer lead paint removal projects

    SciTech Connect (OSTI)

    Kaelin, A.B.

    1996-01-01

    Deciding how to mitigate the hazards during lead paint removal is complex and requires consideration of many variables. Assessment of public health risk, environmental impact, and emissions potential of the operations must be considered. Additionally, the removal technique, containment system, and monitoring criteria must be developed. This article presents an integrated approach to identifying lead hazards, assessing risks to workers, the environment, and the public, developing the appropriate maintenance strategy, and selecting paint removal and containment systems. Also considered are guidelines for selecting a third party to design the overall project. This approach is based on a decision path that provides criteria for project assessment in an orderly fashion. The design of lead paint management projects in industrial applications requires consideration of the variables shown in the decision path.

  19. Protocol, Qualification Standard for the Site Lead Program -...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Qualification Standard for the Site Lead Program - May 2011 Protocol, Qualification Standard for the Site Lead Program - May 2011 May 2011 Qualification Standard for the Site Lead...

  20. Sandia National Laboratories: Due Diligence on Lead Acid Battery...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Due Diligence on Lead Acid Battery Recycling March 23, 2011 Lead Acid Batteries on secondary containment pallet Lead Acid Batteries on secondary containment pallet In 2004, the US...

  1. L I NATIONAL' LEAD COMPANY OF OHIO

    Office of Legacy Management (LM)

    L I NATIONAL' LEAD COMPANY OF OHIO tJw HEALTH AND SAFETY DI"ISION - ANALITICIL DEPT. ANALYTICAL DATA SHEET _I . . NATIONAL LEAD COMPANY O F OHIO HEALTH AND SAFETY DIY1SION - ANALYTICAL DEPT. ANALYTICAL DATA SHEET NATIONA-i LEn' D COMPANY OF OHIO HEALTH AND SAFETY Dl"lSlDN - m4ALITICAL DEPT. ANALYTICAL DATA SHEET NO. I DlSTRlBUTlON OF COPIES I I A,w,lytlc.al Loboratorr (RBCORD COPI) 2 Induswlol Hvalen. B Rodhtlon Dept. 3 1 Water Trsotmmt Plant c=.z w&w hnp,., Only, - . _. NATIONAL

  2. Worker lead exposures during renovation of homes with lead-based paint

    SciTech Connect (OSTI)

    Sussell, A.; Gittleman, J.; Singal, M.

    1998-11-01

    The authors evaluated lead exposures among full-time home renovators and part-time volunteers working primarily in pre-1960 homes with lead-based paint. Potentially hazardous lead exposures were measured during two tasks: exterior dry scraping and wet scraping. Maximum exposures were 120 and 63 {micro}g/m{sup 3}, respectively. Exposures during other tasks, including general repair, weatherization, exterior scraping/painting, window replacement, demolition, and plumbing, were low, as were all 13 full-shift personal exposures. Blood lead levels for full-time workers ranged up to 17.5 {micro}g/dl, with a GM of 5.2 {micro}g/dl; the GM for volunteers was 3.2 {micro}g/dl. All of the paint samples collected from work surfaces had detectable amounts of lead, with 65% of the work surfaces tested having an average lead concentration of >0.5%.

  3. Lead-203 as a label for radioimaging

    DOE Patents [OSTI]

    Srivastava, Suresh C.; Meinken, George E.

    1990-02-06

    A radiopharmaceutical composition comprising a radioactive isotope of lead (Pb-203) in combination with a pharmaceutical or an antibody or antibody fragment and a bifunctional chelating agent. These compositions are especially useful in the imaging and diagnosis of tumors and tumor metastases.

  4. Hanford Leads the Way for Greener Classrooms

    Broader source: Energy.gov [DOE]

    EM’s Richland Operations Office and contractor Mission Support Alliance (MSA) are leading the way to greener classrooms by developing a totally paperless class at the HAMMER Federal Training Facility at the Hanford site. MSA manages HAMMER on behalf of EM.

  5. Lead-203 as a label for radioimaging

    DOE Patents [OSTI]

    Srivastava, Suresh C.; Meinken, George E.

    1990-01-01

    A radiopharmaceutical composition comprising a radioactive isotope of lead (Pb-203) in combination with a pharmaceutical or an antibody or antibody fragment and a bifunctional chelating agent. These compositions are especially useful in the imaging and diagnosis of tumors and tumor metastases.

  6. Archaeological Lead Findings in the Ukraine

    SciTech Connect (OSTI)

    Danevich, F. A.; Kobychev, V. V.; Kropivyansky, B. N.; Mokina, V. M.; Nagorny, S. S.; Nikolaiko, A. S.; Poda, D. V.; Tretyak, V. I.; Kim, S. K.; Kim, H. J.; Kostezh, A. B.; Laubenstein, M.; Nisi, S.; Voronov, S. A.

    2007-03-28

    In June-August 2006 an expedition with the aim to look for low-radioactive archaeological lead at the bottom of the Black Sea, near the Crimean peninsula (Ukraine) was organised by a Korean-Ukrainian collaboration. The first samples with {approx}0.2 tons of total mass were found at a depth of 28 m among the relics of an ancient Greek ship. Their age has been dated to the first century B.C. This lead was used as ballast in the keel of the ship. The element composition of the samples was measured by means of X-ray fluorescence and ICP-MS analyses. The first preliminary limits on the 210Pb contamination of the samples are less than a few hundreds mBq/kg. The measurements were performed using gamma spectroscopy with HPGe-detectors and alpha spectroscopy with commercial {alpha}-detectors. Measurements of 40K, Th/U in the lead samples were undertaken in Kiev and in the underground laboratories of the Laboratori Nazionali del Gran Sasso (LNGS, Italy). If it was found to be radio-clean this lead could be used as high efficiency shield for ultra low-level detectors, and as raw material for growing radio-pure scintillation crystals such as PbMoO4 or PbWO4 for the search for rare processes.

  7. Lead magnesium niobate actuator for micropositioning

    DOE Patents [OSTI]

    Swift, C.D.; Bergum, J.W.

    1994-10-25

    An improved lead magnesium niobate actuator is disclosed comprising a cylindrical lead magnesium niobate crystal stack mounted in a cylindrical casing wherein a bias means, such as one or more belleville washers, is located between one end of the crystal stack and a partially closed end of the casing; and adjustment means are provided which bear against the opposite end of the crystal stack, whereby an adjustable compressive force is constantly applied against the crystal stack, whether the crystal stack is actuated in an extended position, or is in an unactuated contracted position. In a preferred embodiment, cooling ports are provided for the circulation of coolant in the actuator to cool the crystal stack, and provision is made for removal and replacement of the crystal stack without disconnecting the actuator from the external device being actuated. 3 figs.

  8. Lead magnesium niobate actuator for micropositioning

    SciTech Connect (OSTI)

    Swift, Charles D.; Bergum, John W.

    1994-01-01

    An improved lead magnesium niobate actuator is disclosed comprising a cylindrical lead magnesium niobate crystal stack mounted in a cylindrical casing wherein a bias means, such as one or more belleville washers, is located between one end of the crystal stack and a partially closed end of the casing; and adjustment means are provided which bear against the opposite end of the crystal stack, whereby an adjustable compressive force is constantly applied against the crystal stack, whether the crystal stack is actuated in an extended position, or is in an unactuated contracted position. In a preferred embodiment, cooling ports are provided for the circulation of coolant in the actuator to cool the crystal stack, and provision is made for removal and replacement of the crystal stack without disconnecting the actuator from the external device being actuated.

  9. Fermilab | Science | Particle Accelerators | Leading Accelerator Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Leading Accelerator Technology photo From blueprint to construction, Fermilab scientists and engineers develop particle accelerators to produce beams to take particle physics to the next level, collaborating with scientists and laboratories around the world to help build these complex machines. Researchers build accelerators to be efficient and robust along every step of the particle beam's path, from the time it's born to its termination on target. The machines themselves must be efficient,

  10. Leading By Example | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    By Example Leading By Example November 3, 2011 - 3:08pm Addthis New cool roofs installed on the Energy Department’s headquarters building in Washington DC in November, 2010. | Image credit Quentin Kruger, Energy Department New cool roofs installed on the Energy Department's headquarters building in Washington DC in November, 2010. | Image credit Quentin Kruger, Energy Department Brian Costlow Director, Office of Administration Brian Costlow has won several awards for his work recently,

  11. Leading manufacturers in the Better Buildings

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Leading manufacturers in the Better Buildings, Better Plants Program are taking on bold commitments to improve energy efficiency across their operations. Building on President Obama's Better Buildings Initiative and the Administration's broader efforts to double energy productivity by 2030, the U.S. Department of Energy (DOE) works with manufacturers to set corporate-wide energy reduction goals, improve energy management, and track and report their progress. The industrial sector accounts for

  12. Asset Recovery of Hazardous Materials Beneficial Reuse of Radiologically Encumbered Lead Stocks ''Getting the Lead Out''

    SciTech Connect (OSTI)

    LLOYD, E.R.

    2003-01-23

    Underutilized and surplus lead stocks and leaded components are a common legacy environmental problem across much of the Department of Energy (DOE) Complex. While seeking to dispose of these items through its Environmental Management Program, DOE operational programs continue to pursue contemporary mission requirements such as managing and/or storing radioactive isotopes that require lead materials for shielding. This paradox was identified in late 1999 when DOES policies for managing scrap metal were assessed. In January 2000, the Secretary of Energy directed the National Center of Excellence for Materials Recycle (NMR) to develop and implement a comprehensive lead reuse program for all of DOE. Fluor Hanford, contractor for DOE Richland Operations, subsequently contacted NMR to pilot lead reclamation and reuse at the Hanford Site, This relationship resulted in the development of a beneficial reuse pathway for lead reclaimed from spent fuel transport railcars being stored at Hanford. The 1.3 million pounds of lead in the railcars is considered radiologically encumbered due to its prior use. Further, the material was considered a mixed Resource Conservation and Recovery Act (RCRA) low-level radioactive waste that would require expensive storage or macro encapsulation to meet land disposal restrictions prior to burial. Working closely with Flour Hanford and the Office of Air, Water, and Radiation (EH-412), NMR developed a directed reuse pathway for this and other radiologically encumbered lead When derived supplemental release limits were used, the lead recovered from these railcars became eligible for reuse in shielding products to support DOE and commercial nuclear industry operations. Using this disposition pathway has saved Hanford one third of the cost of disposing of the lead and the cost of acquiring additional lead for nuclear shielding applications. Furthermore, the environmental costs associated with mining and producing new lead for shielding products and

  13. Lead Slowing Down Spectrometer Status Report

    SciTech Connect (OSTI)

    Warren, Glen A.; Anderson, Kevin K.; Bonebrake, Eric; Casella, Andrew M.; Danon, Yaron; Devlin, M.; Gavron, Victor A.; Haight, R. C.; Imel, G. R.; Kulisek, Jonathan A.; O'Donnell, J. M.; Weltz, Adam

    2012-06-07

    This report documents the progress that has been completed in the first half of FY2012 in the MPACT-funded Lead Slowing Down Spectrometer project. Significant progress has been made on the algorithm development. We have an improve understanding of the experimental responses in LSDS for fuel-related material. The calibration of the ultra-depleted uranium foils was completed, but the results are inconsistent from measurement to measurement. Future work includes developing a conceptual model of an LSDS system to assay plutonium in used fuel, improving agreement between simulations and measurement, design of a thorium fission chamber, and evaluation of additional detector techniques.

  14. Novel lead-iron phosphate glass

    DOE Patents [OSTI]

    Boatner, Lynn A.; Sales, Brian C.

    1989-01-01

    The invention described and claimed in the specification relates to the discovery that effective addition of Fe.sub.2 O.sub.3 to a lead phosphate glass results in a glass having enhanced chemical durability and physical stability, and consists essentially of the glass resulting from melting a mixture consisting essentially of, in weight percent, 40-66 percent PbO, 30-55 percent P.sub.2 O.sub.5 and an effective concentration up to 12 percent Fe.sub.2 O.sub.3.

  15. Novel lead-iron phosphate glass

    DOE Patents [OSTI]

    Boatner, L.A.; Sales, B.C.

    1989-07-11

    The invention described and claimed in the specification relates to the discovery that effective addition of Fe[sub 2]O[sub 3] to a lead phosphate glass results in a glass having enhanced chemical durability and physical stability, and consists essentially of the glass resulting from melting a mixture consisting essentially of, in weight percent, 40--66 percent PbO, 30--55 percent P[sub 2]O[sub 5] and an effective concentration up to 12 percent Fe[sub 2]O[sub 3].

  16. Non-lead hollow point bullet

    DOE Patents [OSTI]

    Vaughn, Norman L.; Lowden, Richard A.

    2003-04-15

    The non-lead hollow point bullet of the instant invention comprises a mixed construction slug further comprising, a monolithic metal insert having a tapered (preferred conical) hollow point tip and a tapered (preferred conical) tail protrusion, and an unsintered powdered metal composite core in tandem alignment with the insert. The core has a hollow tapered (preferred conical) cavity tip portion coupled with the tapered (preferred conical) tail protrusion on the insert. An open tip jacket envelops at least a portion of the insert and the core. The jacket is swaged at the open tip.

  17. (Lead-lithium corrosion and chemistry)

    SciTech Connect (OSTI)

    Tortorelli, P.F.

    1990-09-21

    The traveler participated in the 1990 European Workshop on Lead-Lithium Corrosion and Chemistry. Main areas of emphasis in the European liquid metal (exclusively Pb-17 at. % Li) program are now on deposition effects and corrosion-resistant surface product layers that can also serve as barriers to tritium permeation and insulators. Dr. Tortorelli also visited Harwell Laboratory to discuss innovative methods of corrosion analysis. He attended the 16th Symposium on Fusion Technology in London and the initial meeting of the Program Committee for the Second International Symposium on Fusion Nuclear Technology, which will be held in June 1991. He toured the JET facilities as part of the SOFT program.

  18. Closure device for lead-acid batteries

    DOE Patents [OSTI]

    Ledjeff, Konstantin

    1983-01-01

    A closure device for lead-acid batteries includes a filter of granulated activated carbon treated to be hydrophobic combined with means for preventing explosion of emitted hydrogen and oxygen gas. The explosion prevention means includes a vertical open-end tube within the closure housing for maintaining a liquid level above side wall openings in an adjacent closed end tube. Gases vent from the battery through a nozzle directed inside the closed end tube against an impingement surface to remove acid droplets. The gases then flow through the side wall openings and the liquid level to quench any possible ignition prior to entering the activated carbon filter. A wick in the activated carbon filter conducts condensed liquid back to the closure housing to replenish the liquid level limited by the open-end tube.

  19. Lead paint abatement -- A technological review

    SciTech Connect (OSTI)

    Draper, A.C. III; Kapuscik, D.

    1994-12-31

    Abatement of lead from various surfaces proves to be a rapidly developing industry. Removal techniques and effectiveness varies greatly with varying substrates (wood, concrete, steel, etc.) and surface configurations including interior/exterior considerations, habitability and anticipated retrofit. Numerous technologies advances, and/or adaptations of long accepted removal techniques have recently emerged. Some of the more commonly used removal procedures including vacuum blasting, chemical stripping, scarifiers, grinders, sanders, etc. will be reviewed. Specific emphasis will be placed upon mode of application, positive and negative environmental aspects, and varying emissions generated. Personnel sampling data will be discussed with respect to associated personal protective equipment impact to derive the most cost productive environmentally conscious alternatives.

  20. Jay Srinivasan! Group Lead, Computational Systems!

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Group Lead, Computational Systems! NUG - Feb 2015 Computational Systems Update NERSC - 2014 --- 2 --- Sponsored C ompute S ystems Carver, P DSF, J GI, K BASE, H EP 8 x F DR I B /global/ scratch 4 PB /project 5 PB /home 250 TB 45 P B s tored, 2 40 P B capacity, 4 0 y ears o f community d ata HPSS 48 GB/s 2.2 P B L ocal Scratch 70 GB/s 6.4 P B L ocal Scratch 140 GB/s 80 GB/s 2 x 10 Gb 1 x 100 Gb Science D ata N etwork Vis & A naly?cs, D ata T ransfer N odes, Adv. A rch., S cience G ateways 80

  1. Lead Slowing Down Spectrometer Research Plans

    SciTech Connect (OSTI)

    Warren, Glen A.; Kulisek, Jonathan A.; Gavron, Victor; Danon, Yaron; Weltz, Adam; Harris, Jason; Stewart, T.

    2013-03-22

    The MPACT-funded Lead Slowing Down Spectrometry (LSDS) project has been evaluating the feasibility of using LSDS techniques to assay fissile isotopes in used nuclear fuel assemblies. The approach has the potential to provide considerable improvement in the assay of fissile isotopic masses in fuel assemblies compared to other non-destructive techniques in a direct and independent manner. The LSDS collaborations suggests that the next step to in empirically testing the feasibility is to conduct measurements on fresh fuel assemblies to understand investigate self-attenuation and fresh mixed-oxide (MOX) fuel rodlets so we may betterto understand extraction of masses for 235U and 239Pu. While progressing toward these goals, the collaboration also strongly suggests the continued development of enabling technology such as detector development and algorithm development, thatwhich could provide significant performance benefits.

  2. LOFT lead rod test results evaluation. [PWR

    SciTech Connect (OSTI)

    Driskell, W.B.; Tolman, E.L.

    1980-07-30

    The purpose for evaluating the LOFT Lead Rod Test (simulations of large break, loss-of-coolant accidents) data was to determine; (a) if the centerline thermocouple and fuel rod elongation sensor data show indications of the collapsed fuel rod cladding, (b) the capability of the FRAP-T5 computer code to accurately predict cladding collapse, and (c) if cladding surface thermocouples enhance fuel rod cooling. With consideration to unresolved questions on data integrity, it was concluded that: the fuel rod centerline thermocouple and elongation sensor data do show indications of the fuel rod cladding collapse; the FRAP-T5 code conservatively predicts cladding collapse; and there is an indication that cladding surface thermocouples are enhancing fuel rod cooling.

  3. Sandia National Laboratories: Due Diligence on Lead Acid Battery Recycling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Due Diligence on Lead Acid Battery Recycling March 23, 2011 Lead Acid Batteries on secondary containment pallet Lead Acid Batteries on secondary containment pallet In 2004, the US Geological Survey estimated that 95% of lead in the United States is recycled, primarily from used lead acid batteries. A broader 2009 European study estimated that globally about 52% of lead is recycled, and a 2008 Asian study estimated a global recycle rate of 68%. Unfortunately, many incidents over the past decade

  4. Alternative Fuels Data Center: San Diego Leads in Promoting EVs

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    San Diego Leads in Promoting EVs to someone by E-mail Share Alternative Fuels Data Center: San Diego Leads in Promoting EVs on Facebook Tweet about Alternative Fuels Data Center: San Diego Leads in Promoting EVs on Twitter Bookmark Alternative Fuels Data Center: San Diego Leads in Promoting EVs on Google Bookmark Alternative Fuels Data Center: San Diego Leads in Promoting EVs on Delicious Rank Alternative Fuels Data Center: San Diego Leads in Promoting EVs on Digg Find More places to share

  5. Energy Efficiency Lead-by-Example Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lead-by-Example Resources Energy Efficiency Lead-by-Example Resources State and local governments can lead by example by promoting energy efficiency programs and policies for public facilities, equipment, and government operations. Find energy efficiency lead-by-example resources below. DOE Resource Federal Energy Management Program Publications. Other Resources Environmental Protection Agency: Lead by Example in Government Operations ACEEE's Lead By Example Initiatives National Governors

  6. Fuel Cell Expert Dr. Sanjiv Malhotra to Lead Energy Department...

    Energy Savers [EERE]

    Expert Dr. Sanjiv Malhotra to Lead Energy Department's Clean Energy Investment Center Fuel Cell Expert Dr. Sanjiv Malhotra to Lead Energy Department's Clean Energy Investment ...

  7. Advanced Lead Acid Battery Consortium | Open Energy Information

    Open Energy Info (EERE)

    Lead Acid Battery Consortium Jump to: navigation, search Name: Advanced Lead-Acid Battery Consortium Place: Durham, North Carolina Zip: 27713 Sector: Vehicles Product: The ALABC is...

  8. Lead Hexacyanoferrate(II) Tetrahydrate: Crystal Structure, FTIR...

    Office of Scientific and Technical Information (OSTI)

    Lead Hexacyanoferrate(II) Tetrahydrate: Crystal Structure, FTIR Spectroscopy and Thermal Decomposition Studies Citation Details In-Document Search Title: Lead Hexacyanoferrate(II) ...

  9. New Superconducting Magnet Will Lead to Next Generation of Wind...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Superconducting Magnet Will Lead to Next Generation of Wind Turbine Generators New Superconducting Magnet Will Lead to Next Generation of Wind Turbine Generators September 12, 2014 ...

  10. SEEWEC Consortium lead partner Ghent University | Open Energy...

    Open Energy Info (EERE)

    SEEWEC Consortium lead partner Ghent University Jump to: navigation, search Name: SEEWEC Consortium lead partner Ghent University Address: Sint Pietersnieuwstraat 41 Place: Gent...

  11. Low Emission Asian Development (LEAD) Program | Open Energy Informatio...

    Open Energy Info (EERE)

    Low Emission Asian Development (LEAD) Program Redirect page Jump to: navigation, search REDIRECT Low Emissions Asian Development (LEAD) Program Retrieved from "http:...

  12. Volunteers Leading Technology, A Case Study: Chewonki Renewable...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Volunteers Leading Technology, A Case Study: Chewonki Renewable Hydrogen Project Volunteers Leading Technology, A Case Study: Chewonki Renewable Hydrogen Project This presentation ...

  13. Fractionated Radiation Exposure of Rat Spinal Cords Leads to...

    Office of Scientific and Technical Information (OSTI)

    Fractionated Radiation Exposure of Rat Spinal Cords Leads to Latent Neuro-Inflammation in ... of Rat Spinal Cords Leads to Latent Neuro-Inflammation in Brain, Cognitive Deficits, ...

  14. Solar Decathlon 2015: Nation's Leading Sustainable Home Design...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar Decathlon 2015: Nation's Leading Sustainable Home Design Competition on the Horizon Solar Decathlon 2015: Nation's Leading Sustainable Home Design Competition on the Horizon...

  15. Bush Administration Plays Leading Role in Studying and Addressing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bush Administration Plays Leading Role in Studying and Addressing Global Climate Change Bush Administration Plays Leading Role in Studying and Addressing Global Climate Change...

  16. Ultrasound in lead-bismuth eutectic

    SciTech Connect (OSTI)

    Dierckx, M.; Van Dyck, D.

    2011-07-01

    The Belgian Nuclear Research Centre (SCK.CEN) is in the process of designing MYRRHA, a new multi-purpose irradiation facility to replace the ageing BR2. MYRRHA is a fast spectrum reactor cooled with lead-bismuth eutectic (LBE). As liquid metal is opaque to visual light, ultrasonic measurement techniques are selected to fulfill essential tasks that, according to our assessment, will be demanded by licensing authorities, in particular: fuel assembly identification and localization of a lost fuel assembly. To that end, a considerable research effort at SCK.CEN is devoted to study ultrasonic propagation in LBE. As ultrasonic experiments in LBE are elaborate and expensive to set up, we are particularly interested in to what extent experiments in water can be extrapolated to LBE - one of the main focuses of this article. We describe and present results of a first experiment with this goal which shows that the signal to noise ratio is better in LBE and that we even see small diffuse reflections up to 40 deg. off normal. On the other hand, we do not see internal reflections in stainless steel objects in LBE which we do in water. Therefore, we conclude that experiments in water can be used to validate algorithms for LBE on the condition that they do not rely on internal reflections. We also present solutions to tackle the essential tasks: fuel assembly identification and lost object localization. The requirements for the ultrasonic equipment implementing these solutions are also discussed. (authors)

  17. Get the lead out! removing lead-based paint on hydro plant structures

    SciTech Connect (OSTI)

    Johnson, M.L.

    1996-05-01

    This article describes a hydroblasting technology used to remove lead-based surface coatings from the steel associated with the flood gates at the Wirtz Dam. Using this technology and an advanced moisture-cured urethane coating, the Lower Colorado River Authority was able to save more than $250,000 in materials, labor, and waste disposal costs.

  18. Microsoft Word - Final Lead Assembly SA.doc

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... of European Fabrication of Lead MOX Assemblies. ...... 20 Table 4. Comparison of Human Health ...

  19. Building Standards Lead-by-Example Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standards Lead-by-Example Resources Building Standards Lead-by-Example Resources State and local governments can lead by example by promoting energy efficiency programs and policies for public facilities, equipment, and government operations. Find building standards lead-by-example resources below. DOE Resource National Best Practices Manual For Building High Performance Schools. Other Resource Roadmap to Green Government Buildings

  20. MULTI-TUBE POWER LEADS TOWER FOR BEPCII IR MAGNETS.

    SciTech Connect (OSTI)

    JIA,L.X.; ZHANG,X.B.; WANG,L.; WANG,T.H.; YAO,Z.L.

    2004-05-11

    A power lead tower containing the multi-tube power leads is designed and under fabrication for the superconducting IR quadrupole magnets in the Beijing Electron Position Collider Upgrade (BEPCII). The lead tower consists of six pairs of gas-cooled leads for seven superconducting coils at various operating currents. The power lead is designed in a modular fashion, which can be easily applied to suit different operating current. The end copper block of the tube lead has a large cold mass that provide a large time constant in case of cooling flow interruption. A novel cryogenic electrical isolator is used for the leads.

  1. Engineer Russ Feder leads development of diagnostic tools for...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineer Russ Feder leads development of diagnostic tools for US ITER as physicist Dave ... Feder leads PPPL's development of all diagnostic tools for US ITER, which manages U.S. ...

  2. Zarb Appointed to Lead the Federal Energy Administration | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) Zarb Appointed to Lead the Federal Energy Administration Zarb Appointed to Lead the Federal Energy Administration Washington, DC President Ford appoints Frank Zarb to be the first Administrator of the newly created Federal Energy Agency

  3. PNNL Breakthrough Leads to Less Foreign Oil, More American Jobs...

    Energy Savers [EERE]

    PNNL Breakthrough Leads to Less Foreign Oil, More American Jobs PNNL Breakthrough Leads to Less Foreign Oil, More American Jobs October 17, 2011 - 2:50pm Addthis A highly efficient ...

  4. DOE ZERH Second Leading Builder Round Table Meeting Report |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE ZERH Second Leading Builder Round Table Meeting Report On October 23rd-24th, 2014, the ZERH program held its Second Leading Production Builder Round Table Meeting in Suwanee, ...

  5. Energy Department to Lead Workshop on Tribal Renewable Energy...

    Office of Environmental Management (EM)

    Lead Workshop on Tribal Renewable Energy Development in Oklahoma Energy Department to Lead Workshop on Tribal Renewable Energy Development in Oklahoma June 1, 2015 - 9:50am Addthis ...

  6. Fatal pediatric poisoning from leaded paint--Wisconsin, 1990

    SciTech Connect (OSTI)

    Not Available

    1991-03-29

    Although fatal lead poisoning among children occurs rarely in the United States, it represents a medical and public health emergency. This report summarizes the investigation of a child who died from poisoning associated with ingestion of lead-based paint.

  7. Anaerobic microbial dissolution of lead and production of organic acids

    DOE Patents [OSTI]

    Francis, A.J.; Dodge, C.; Chendrayan, K.

    1986-02-28

    The present invention relates to a method of solubilizing lead, in the form of lead oxide, found in industrial wastes, before these wastes are dumped into the environment. The lead is solubilized by dissolving the lead oxide in the wastes through contact with an anaerobic bacterial culture containing the bacterium ATCC No. 53464. The solubilized lead can then be removed from the wastes by chemical separation. It could also be removed by extending the contact period with the bacterial culture. As the culture grows, the solubilized lead is removed from the wastes by bioaccumulation by the microorganism or by immobilization by a polymer-like material produced by the microorganism. At this point, the lead is then removed from the wastes when the waste material is separated from the bacterial culture. If desired, the bacterial culture could be digested at this point to yield relatively pure lead for further industrial use.

  8. GE leads the way in photonics research | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GE continues leading role in photonics industry - from LED to digital x-ray Click to email ... GE continues leading role in photonics industry - from LED to digital x-ray Danielle ...

  9. Crystal structure and compressibility of lead dioxide up to 140...

    Office of Scientific and Technical Information (OSTI)

    Crystal structure and compressibility of lead dioxide up to 140 GPa Citation Details In-Document Search Title: Crystal structure and compressibility of lead dioxide up to 140 GPa ...

  10. Getting the lead out: Citizen involvement in the Williamsburg Bridge lead paint removal project

    SciTech Connect (OSTI)

    Forker, T.R.

    1997-08-01

    This paper examines the process and results of citizen involvement in developing new environmental control and compliance procedures used by the New York City Department of Transportation (NYC DOT) for lead paint removal on the Williamsburg Bridge and other structures. As a case study of the effects of public involvement in environmental decision-making, the study identifies and discusses the factors that produced failures or successes in satisfying the citizen`s concerns about health risks and the effectiveness of the selected pollution control technology.

  11. Alternative Fuels Data Center: Smoky Mountains Leads the Way in

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Implementing Alternative Fuels Smoky Mountains Leads the Way in Implementing Alternative Fuels to someone by E-mail Share Alternative Fuels Data Center: Smoky Mountains Leads the Way in Implementing Alternative Fuels on Facebook Tweet about Alternative Fuels Data Center: Smoky Mountains Leads the Way in Implementing Alternative Fuels on Twitter Bookmark Alternative Fuels Data Center: Smoky Mountains Leads the Way in Implementing Alternative Fuels on Google Bookmark Alternative Fuels Data

  12. Retrofit Program Lead-by-Example Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Retrofit Program Lead-by-Example Resources Retrofit Program Lead-by-Example Resources State and local governments can lead by example by promoting energy efficiency programs and policies for public facilities, equipment, and government operations. Find retrofit program lead-by-example resources below. Local Government Climate and Energy Strategy Series: Energy Efficiency in Local Government Operations: A Guide to Developing and Implementing Greenhouse Gas Reduction Programs ACEEE: Comprehensive

  13. Procurement Standards Lead-by-Example Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Procurement Standards Lead-by-Example Resources Procurement Standards Lead-by-Example Resources State and local governments can lead by example by promoting energy efficiency programs and policies for public facilities, equipment, and government operations. Find procurement standards lead-by-example resources below. DOE Resource Energy-Efficient Product Procurement. Other Resources ENERGY STAR®: All Certified Products New York State Energy Research and Development Authority: Procurement

  14. 2015 Leading Builder Round Table Report | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Leading Builder Round Table Report 2015 Leading Builder Round Table Report The nation is on the cusp of a dramatic movement to zero energy ready homes. This includes statewide codes, large developments, and a growing amount of commitment to the DOE Zero Energy Ready Home program. Much of this progress can be attributed to a small contingent of our nation's leading builders who are demonstrating the technical, cost, and design feasibility for this level of excellence At the 2015 Leading Builder

  15. Cities Leading Through Energy Analysis and Planning Infographic |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Cities Leading Through Energy Analysis and Planning Infographic Cities Leading Through Energy Analysis and Planning Infographic The Cities Leading through Energy Analysis and Planning (Cities-LEAP) project delivers standardized, localized energy data and analysis that enables cities to lead clean energy innovation and integrate strategic energy analysis into decision making. Two Cities-LEAP infographics catalog the programs and tools currently supporting local

  16. NNSA Leads Conference on Nonproliferation Research and Development |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration | (NNSA) Leads Conference on Nonproliferation Research and Development December 04, 2008 WASHINGTON, D.C. -- The National Nuclear Security Administration (NNSA) concluded a conference showcasing the leading edge nuclear nonproliferation research being conducted at premier universities and by industry experts. The University and Industry Technical Interchange (UITI) included over 75 presentations by leading researchers to showcase nuclear detection

  17. Lab Breakthrough: Lead-free Solder | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lead-free Solder Lab Breakthrough: Lead-free Solder May 24, 2012 - 10:45am Addthis Iver Anderson, senior metallurgist at Ames Laboratory, explains the importance of lead-free solder in taking hazardous lead out of the environment by eliminating it from discarded computers and electronics that wind up in landfills. Anderson led a team that developed a tin-silver-copper replacement for traditional lead-tin solder that has been adopted by more than 50 companies worldwide. View the entire Lab

  18. Lead contamination in the Mallard (Anas platyrhynchos) in Italy

    SciTech Connect (OSTI)

    Tirelli, E.; Maestrini, N.; Govoni, S.; Catelli, E.

    1996-05-01

    The main cause of lead poisoning in waterfowl is due to ingestion of spent lead shot in areas of high hunting pressure . Italian literature on this subject is very scarce and the few available studies concern episodic cases. to contribute to the assessment of the impact of lead shot in waterfowl in Italy, systematic research has been carried out on shorebirds caught for ringing in Tiscany and are continuing on dabbling and diving ducks by checking the presence of lead in blood samples and lead shot in the gizzard. This study targets the mallard duck. 17 refs., 1 fig., 1 tab.

  19. Microsoft Word - 2009O-03SystemCriteria.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Rick Jansons BOARD MEMBERS: Local Business Harold Heacock Labor/Work Force Mike Keizer Thomas Carpenter Susan Leckband Jeff Luke Rebecca Holland Local Environment Gene Van Liew Local Government Maynard Plahuta Pam Larsen Rick Jansons Rob Davis Julie Jones Richard Leitz Bob Parks Tribal Government Russell Jim Gabriel Bohnee Public Health Margery Swint University Doug Mercer Gene Schreckhise Public-at-Large Norma Jean Germond Keith Smith Bob Parazin Bob Suyama Regional Environ- ment/Citizen Todd

  20. Summary of First AEO2014 Electricity Working Group Meeting

    U.S. Energy Information Administration (EIA) Indexed Site

    9, 2013 MEMORANDUM FOR: John Conti Assistant Administrator for Energy Analysis Alan Beamon Office Director Office of Electricity, Coal, Nuclear, and Renewables Analysis Paul Holtberg Team Leader Analysis Integration Team FROM: Electricity Analysis Team SUBJECT: Summary of First AEO 2014 Electricity Working Group Meeting held on July 24, 2013 ATTENDEES: Diefenderfer, Jim Aniti, Lori Milton, Carrie Jones, Jeff Martin, Laura Bredehoeft, Gwendolyn Eynon, Bob Leff, Mike Mellish, Mike Kearney, Diane

  1. Energy Secretary Bodman Leads US Delegation to International Energy Agency

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ministerial | Department of Energy Leads US Delegation to International Energy Agency Ministerial Energy Secretary Bodman Leads US Delegation to International Energy Agency Ministerial May 2, 2005 - 12:41pm Addthis PARIS, FRANCE -- Secretary of Energy Samuel W. Bodman this week is leading the U.S. Delegation to the Ministerial Meeting of the International Energy Agency (IEA), being held in Paris. Secretary Bodman will emphasize three principles at the IEA Ministerial -- that energy security

  2. Reversible and irreversible ion migration processes in lead halide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    perovskites for photovoltaics | MIT-Harvard Center for Excitonics Reversible and irreversible ion migration processes in lead halide perovskites for photovoltaics March 9, 2016 at 4:30 PM/36-462 Eric Hoke Stanford University, Draper Laboratory hoke-eric Lead hybrid perovskites are a promising family of photovoltaic absorber materials that have achieved power conversion efficiencies of over 20%. Lead halide perovskites are ionic materials with a low lattice energy which are unusual properties

  3. EERE Success Story- Hydropower Fellowship Program Leading Students to

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industry Careers | Department of Energy Hydropower Fellowship Program Leading Students to Industry Careers EERE Success Story- Hydropower Fellowship Program Leading Students to Industry Careers April 20, 2016 - 12:15pm Addthis EERE Success Story— Hydropower Fellowship Program Leading Students to Industry Careers The Hydro Research Foundation's (HRF) Hydro Fellowship Program allowed outstanding up-and-coming student fellows to conduct hydropower-related research-all made possible by a

  4. Kjiersten Fagnan Appointed NERSC/JGI Engagement Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Kjiersten Fagnan Named NERSC/JGI Engagement Lead Kjiersten Fagnan Appointed NERSC/JGI Engagement Lead September 1, 2014 fagnan.jpg Kjiersten Fagnan has been named the NERSC/JGI Engagement Lead for Joint Genome Institute (JGI) computational and data analysis efforts carried out at the Department of Energy's (DOE) National Energy Research Scientific Computing Center (NERSC). Fagnan, who holds a Ph.D. in Applied Mathematics from the University of Washington, started at NERSC as a petascale postdoc

  5. Bush Administration Plays Leading Role in Studying and Addressing Global

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Climate Change | Department of Energy Plays Leading Role in Studying and Addressing Global Climate Change Bush Administration Plays Leading Role in Studying and Addressing Global Climate Change February 27, 2007 - 3:49pm Addthis Washington, DC - Continuing to take the lead in addressing global climate change, Energy Secretary Samuel Bodman, Environmental Protection Agency (EPA) Administrator Stephen Johnson, and National Oceanic and Atmospheric Administration (NOAA) Administrator Vice

  6. Sec. Herrington Leads Delegation in Response to Chernobyl Accident...

    National Nuclear Security Administration (NNSA)

    Photo Gallery Jobs Apply for Our Jobs Our Jobs Working at NNSA Blog Home About Us Our History NNSA Timeline Sec. Herrington Leads Delegation in Response to ... Sec....

  7. Combined Heat and Power System Enables 100% Reliability at Leading...

    Office of Environmental Management (EM)

    - Case Study, 2013 Combined Heat and Power System Enables 100% Reliability at Leading ... uninterrupted energy services to TECO customers in the event of a prolonged grid outage. ...

  8. Lasing in robust cesium lead halide perovskite nanowires (Journal...

    Office of Scientific and Technical Information (OSTI)

    Title: Lasing in robust cesium lead halide perovskite nanowires Authors: Eaton, Samuel W. ; Lai, Minliang ; Gibson, Natalie A. ; Wong, Andrew B. ; Dou, Letian ; Ma, Jie ; Wang, ...

  9. EM Leads Successful Workshop Supporting Fukushima Cleanup | Department...

    Broader source: Energy.gov (indexed) [DOE]

    officials leading the cleanup of the Fukushima Daiichi Nuclear Power Plant site and surrounding area, this time addressing priorities identified by Japan's government agencies. ...

  10. West Africa Emerges as Leading Region in Africa for Renewable...

    Open Energy Info (EERE)

    West Africa Emerges as Leading Region in Africa for Renewable Energy and Energy Efficiency Home > Groups > Clean and Renewable Energy Dc's picture Submitted by Dc(266) Contributor...

  11. Solar Test Facility Upgrades Complete, Leading to Better Sandia...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Test Facility Upgrades Complete, Leading to Better Sandia Capabilities to Support Power ... Applications National Solar Thermal Test Facility Nuclear Energy Systems ...

  12. Establishment of the Heavy Isotopes Lead Materials Management...

    Office of Scientific and Technical Information (OSTI)

    Materials Management Organization (LMMO) Citation Details In-Document Search Title: Establishment of the Heavy Isotopes Lead Materials Management Organization (LMMO) Authors: ...

  13. Moderate Doping Leads to High Performance of Semiconductor/Insulator...

    Office of Scientific and Technical Information (OSTI)

    Title: Moderate Doping Leads to High Performance of SemiconductorInsulator Polymer Blend Transistors Authors: Lu, Guanghao ; Blakesley, James ; Himmelberger, Scott ; Pingel, ...

  14. Mainzer taps Gendron, Ehli to lead Power and Corporate Strategy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mainzer-taps-Gendron-Ehli-to-lead-Power-and-Corporate-Strategy Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects & Initiatives...

  15. Method of manufacturing lead electrodes for storage cells

    DOE Patents [OSTI]

    Jonville, P.; Stoehr, H.; Beccu, K.D.

    1975-09-23

    A method of manufacturing electrodes for lead storage batteries is described. Molten lead or lead alloy is deposited on a felt of glass fibers by spraying in a molten state to fill the space between the fibers of the felt to form an electrically conductive zone defining electrode contacts. A mass of powdered lead-based material is introduced into the felt by filtration for subsequently producing an active electrode mass by at least one electrochemical transformation. The felt is then cut into individual electrodes. (auth)

  16. Nano Design Works: Industry's contact for emerging tech, leading...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Works: Industry's contact for emerging tech, leading tools, and experts Argonne's Nano Design Works gives companies and entrepreneurs the solutions that enable technological ...

  17. Research Led by Sandia Reveals Leading-Edge Erosion Significantly...

    Broader source: Energy.gov (indexed) [DOE]

    Laboratories revealed that leading-edge erosion on wind turbine blades can have a detrimental effect on wind turbine aerodynamic performance within the second year of operation. ...

  18. Indonesia-Low Emissions Asian Development (LEAD) Program | Open...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  19. Thailand-Low Emissions Asian Development (LEAD) Program | Open...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  20. Philippines-Low Emissions Asian Development (LEAD) Program |...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  1. Papua New Guinea-Low Emissions Asian Development (LEAD) Program...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  2. India-Low Emissions Asian Development (LEAD) Program | Open Energy...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  3. Cambodia-Low Emissions Asian Development (LEAD) Program | Open...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  4. Bangladesh-Low Emissions Asian Development (LEAD) Program | Open...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  5. Vietnam-Low Emissions Asian Development (LEAD) Program | Open...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  6. Malaysia-Low Emissions Asian Development (LEAD) Program | Open...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  7. Nepal-Low Emissions Asian Development (LEAD) Program | Open Energy...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  8. Laos-Low Emissions Asian Development (LEAD) Program | Open Energy...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  9. Surface Plasmon Instability Leading to Emission of Radiation...

    Office of Scientific and Technical Information (OSTI)

    Title: Surface Plasmon Instability Leading to Emission of Radiation. Abstract not provided. Authors: Gumbs, Godfrey ; Iurov, Andrii ; Huang, Danhong ; Pan, Wei Publication Date: ...

  10. Lead Research and Development Activity for High Temperature,...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Temperature, Low Relative Humidity Membrane Program Lead Research and Development Activity for High Temperature, Low Relative Humidity Membrane Program A presentation to the High ...

  11. Ames Laboratory to Lead New Research Effort to Address Shortages...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ames Laboratory to Lead New Research Effort to Address Shortages in Rare Earth and Other ... These critical materials, including many rare earth elements, are essential for ...

  12. Testing your home for lead in paint, dust, and soil

    SciTech Connect (OSTI)

    1998-10-01

    This publication is for anyone who is considering having a home or residence tested for lead in paint, dust, or soil by a professional. It explains the technical aspects of lead testing without overwhelming the reader. The first section tells why you would test for lead, the approaches for testing for lead, and what information you will get from each approach. The second section answers specific questions about how paint, soil, and dust sampling are conducted by the professional in your home. Finally, the last section answers other questions about testing, including questions about home test kits and testing of water and ceramics.

  13. Westinghouse Selects Bill Keeley To Lead Strategic Planning and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    TRU Solutions LLC (WTS) has appointed Bill Keeley to lead the integrated functions of Strategic Planning and Communication at the Waste Isolation Pilot Plant (WIPP). WTS is the...

  14. Robert C. Seamans, Jr. Appointed to Lead Nuclear Weapons Program...

    National Nuclear Security Administration (NNSA)

    C. Seamans, Jr. Appointed to Lead Nuclear Weapons Program | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile...

  15. Solar Decathlon 2015: Nation's Leading Sustainable Home Design...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Decathlon 2015: Nation's Leading Sustainable Home Design Competition on the Horizon Solar ... Richard King Richard King Director, Solar Decathlon KEY FACTS 2015 Solar Decathlon to kick ...

  16. Deputy Secretary of Energy Reviews Leading Nuclear Counterterrorism...

    National Nuclear Security Administration (NNSA)

    Deputy Secretary of Energy Reviews Leading Nuclear Counterterrorism Assets at Andrews Air Force Base September 09, 2009 WASHINGTON, D.C. - Deputy Secretary of Energy Daniel Poneman ...

  17. Fatigue of extracted lead zirconate titanate multilayer actuators...

    Office of Scientific and Technical Information (OSTI)

    Testing of large prototype lead zirconate titanate (PZT) stacks presents substantial technical challenges to electronic testing systems, so an alternative approach that uses ...

  18. University Teams Lead Innovative Solar Research Projects | Department...

    Office of Environmental Management (EM)

    University Teams Lead Innovative Solar Research Projects August 28, 2012 - 2:55pm Addthis A concentrating solar power system in Albuquerque, New Mexico. | Photo by Randy Montoya...

  19. NNSA Computers Lead Global List | National Nuclear Security Administra...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Computers Lead Global List | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering...

  20. DOE specification: Flooded-type lead-acid storage batteries

    SciTech Connect (OSTI)

    1996-08-01

    This document contains a ``fill-in-the-blanks`` guide specification for procurement of flooded-type lead-acid storage batteries, for uninterruptible power supply applications.

  1. Y-12 leads the way in specialized machining

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    leads the way in specialized machining The original nine major buildings at Y-12, five "Alpha" buildings and four "Beta" buildings were originally built to house calutrons to...

  2. NREL Names New Executives to Lead Bioenergy, Bioscience and Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Names New Executives to Lead Bioenergy, Bioscience and Energy Systems Integration Facility ... NREL has named Tom Foust, a nine-year NREL veteran, as its National Bioenergy Center ...

  3. Data, Feedback, & Awareness Lead to Big Energy Savings

    Broader source: Energy.gov (indexed) [DOE]

    Data, Feedback, & Awareness Lead to Big Energy Savings The Navy Region Southwest Metro San ... organized energy awareness program centered on energy data gathering and distribution. ...

  4. Vapor cooled current lead for cryogenic electrical equipment

    DOE Patents [OSTI]

    Vansant, James H.

    1983-01-01

    Apparatus and method are provided for conducting electric current to cryogenic electrical equipment devices. A combination of inner and outer tubes together form a plurality of hollow composite tubes housed in a sheath. Top and bottom block mounting means are fitted to hold the composite tubes and are affixed to the ends of the sheath. This combination forms a current lead. The current lead is attached to a cryogenic device housing a fluid coolant which moves through the current lead, cooling the current lead as the fluid travels.

  5. Ames Laboratory to lead new consortium to advance refrigeration...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory to lead new consortium to advance refrigeration technology Ames Laboratory will ... friendly and energy-efficient refrigeration technologies, sponsored by DOE's ...

  6. Johney Green to Lead NREL Mechanical and Thermal Systems Engineering...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Johney Green to Lead NREL Mechanical and Thermal Systems Engineering Research August 11, 2016 Photo of Johney Green Photo of Johney Green The Energy Department's National Renewable ...

  7. NREL Highlights Leading Utility Green Power Programs - News Releases...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL Highlights Leading Utility Green Power Programs March 4, 2004 Golden, Colo. - The U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) today released ...

  8. NREL Ranks Leading Utility Green Power Programs - News Releases...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL Ranks Leading Utility Green Power Programs Pricing programs give consumers clean power choices April 3, 2007 The U.S. Department of Energy's (DOE) National Renewable Energy ...

  9. Johney Green to Lead NREL Mechanical and Thermal Systems Engineering...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Johney Green to Lead NREL Mechanical and Thermal Systems Engineering Research August 11, 2016 The Energy Department's National Renewable Energy Laboratory (NREL) has named Dr. ...

  10. An Insoluble Titanium-Lead Anode for Sulfate Electrolytes

    SciTech Connect (OSTI)

    Ferdman, Alla

    2005-05-11

    The project is devoted to the development of novel insoluble anodes for copper electrowinning and electrolytic manganese dioxide (EMD) production. The anodes are made of titanium-lead composite material produced by techniques of powder metallurgy, compaction of titanium powder, sintering and subsequent lead infiltration. The titanium-lead anode combines beneficial electrochemical behavior of a lead anode with high mechanical properties and corrosion resistance of a titanium anode. In the titanium-lead anode, the titanium stabilizes the lead, preventing it from spalling, and the lead sheathes the titanium, protecting it from passivation. Interconnections between manufacturing process, structure, composition and properties of the titanium-lead composite material were investigated. The material containing 20-30 vol.% of lead had optimal combination of mechanical and electrochemical properties. Optimal process parameters to manufacture the anodes were identified. Prototypes having optimized composition and structure were produced for testing in operating conditions of copper electrowinning and EMD production. Bench-scale, mini-pilot scale and pilot scale tests were performed. The test anodes were of both a plate design and a flow-through cylindrical design. The cylindrical anodes were composed of cylinders containing titanium inner rods and fitting over titanium-lead bushings. The cylindrical design allows the electrolyte to flow through the anode, which enhances diffusion of the electrolyte reactants. The cylindrical anodes demonstrate higher mass transport capabilities and increased electrical efficiency compared to the plate anodes. Copper electrowinning represents the primary target market for the titanium-lead anode. A full-size cylindrical anode performance in copper electrowinning conditions was monitored over a year. The test anode to cathode voltage was stable in the 1.8 to 2.0 volt range. Copper cathode morphology was very smooth and uniform. There was no

  11. Water supplier copes with lead paint removal regs

    SciTech Connect (OSTI)

    Becker, C.E. ); Lovejoy, D.R.; Bryck, J.L.; Rockensies, W.H.

    1993-12-01

    This article examines new paint removal methods that minimize releasing of paints containing lead to the environment and lead free coating systems for tank corrosion protection used in the Village of Freeport in Long Island, New York. The topics of the article include coating failures, removal tools and methods, paint and application methods.

  12. Method for fabricating fan-fold shielded electrical leads

    DOE Patents [OSTI]

    Rohatgi, Rajeev R.; Cowan, Thomas E.

    1994-01-01

    Fan-folded electrical leads made from copper cladded Kapton, for example, with the copper cladding on one side serving as a ground plane and the copper cladding on the other side being etched to form the leads. The Kapton is fan folded with the leads located at the bottom of the fan-folds. Electrical connections are made by partially opening the folds of the fan and soldering, for example, the connections directly to the ground plane and/or the lead. The fan folded arrangement produces a number of advantages, such as electrically shielding the leads from the environment, is totally non-magnetic, and has a very low thermal conductivity, while being easy to fabricate.

  13. Method for fabricating fan-fold shielded electrical leads

    DOE Patents [OSTI]

    Rohatgi, R.R.; Cowan, T.E.

    1994-12-27

    Fan-folded electrical leads made from copper cladded Kapton, for example, with the copper cladding on one side serving as a ground plane and the copper cladding on the other side being etched to form the leads. The Kapton is fan folded with the leads located at the bottom of the fan-folds. Electrical connections are made by partially opening the folds of the fan and soldering, for example, the connections directly to the ground plane and/or the lead. The fan folded arrangement produces a number of advantages, such as electrically shielding the leads from the environment, is totally non-magnetic, and has a very low thermal conductivity, while being easy to fabricate. 3 figures.

  14. A new XRF method for measuring lead in paint

    SciTech Connect (OSTI)

    Grodzins, L.; Parsons, C.; Sackett, D.; Shefsky, S.; Tannian, B.

    1995-12-31

    The traditional field testing method for lead paint is the use of x-ray fluorescence, where the K shell fluorescence x-rays of lead (at 73 and 75 MeV) are measured. Although the K shell method can suffer from substrate effects and hence low sensitivity around the action level of 1 mg/cm{sup 2} of lead, it has been the industry choice because the effects of the overlying paint matrix on the K-shell x-rays are negligible. L shell x-rays of lead, at L{sub {alpha}} = 10.5 keV and L{sub {beta}} = 12.6 keV, provide much greater sensitivity and are free of substrate effects, but corrections for the absorption of the L-shell x-rays by the overlying non-lead paint matrix must be made. Such corrections were thought to be impossible without knowledge of the composition and thickness of the overlying paint matrix. NITON has developed a new method that makes it possible to use L-shell x-rays to accurately and quickly determine the absolute concentration of lead in buried lead paint (in mg/cm{sup 2}) without knowledge of the composition or thickness of the layers overlying the lead. The invention makes use of the fact that the ratio of the mass attenuation coefficients for the L{sub {alpha}} at 10.5 keV to the L{sub {beta}} at 12.6 keV is effectively independent of the elemental composition of paint layers. The new method also gives a measure of the depth of the lead beneath the surface. Theory and confirming experimental data will be presented. The authors will describe the NITON XL, a portable XRF device which uses the invention to give the lead concentration and its depth beneath the surface of paint.

  15. SU-E-P-09: Radiation Transmission Measurements and Evaluation of Diagnostic Lead-Based and Lead-Free Aprons

    SciTech Connect (OSTI)

    Syh, J

    2014-06-01

    Purpose: This study was conducted to ensure that various lead shield apron manufacturers provided accurate attenuation factors regardless of whether the apron was made of lead-based or lead-free equivalent material. Methods: A calibrated ionization survey meter was placed at chest height and 36 cm horizontally away from a solid water phantom on a simulator couch. Measurements were done with or without apron. Radiation field was set to 24cmx24cm with the phantom at 100cm source-to-surface distance. Irradiation time was set for 1 minute at voltages of 60, 80, 100 and 120 kVp. Current was set at 6mA. Results: Between 60 kVp and 120 kVp, the transmission through 0.50 mm of lead-based apron was between 1.0% and 6.5% with a mean value of 3.2% and a standard deviation (s.d.) of 1.4%. The transmissions through the 0.50 mm lead-free aprons were 1.0 % to 12.0% with a mean value of 6.1% and s.d. of 2.6%. At 120 kVp, the transmission value was 6.5% for 0.50 mm lead-based apron and 11.1% to 12.0% for 0.50 mm lead-free aprons. The radiation transmissions at 80 kVp, measured in two different 0.5 mm lead-free aprons, were 4.3% each. However, only 1.4% transmission was found through the lead-based apron. Overall, the radiation transmitted through the lead-based apron was 1/3 transmission of lead-free at 80kVp, and half value of lead-free aprons at 100 and 120 kVp. Conclusion: Even though lead-based and lead-free aprons all claimed to have the same lead equivalent thickness, the transmission might not be the same. The precaution was needed to exercise diligence in quality assurance program to assure adequate protection to staff who wear it during diagnostic procedures. The requirement for aprons not only should be in certain thickness to meet state regulation but also to keep reasonably achievable low exposure with the accurate labeling from manufacturers.

  16. Anaerobic microbial dissolution of lead and production of organic acids

    DOE Patents [OSTI]

    Francis, A.J.; Dodge, C.; Chendrayan, K.; Quinby, H.L.

    1987-04-16

    The present invention related to an anaerobic bacterial culture of Clostridium sp. ATCC No. 53464 which solubilizes lead oxide under anaerobic conditions in coal and industrial wastes and therefore presents a method of removing lead from such wastes before they are dumped into the environment. The rat of lead dissolution during logarithmic growth of the bacteria in 40 ml medium containing 3.32 ..mu..moles of lead as lead oxide was 0.042 ..mu..moles m1/sup /-/1/ hr/sup /-/1/. Dissolution of lead oxide by the bacterial isolate is due to the production of metabolites and acidity in the culture medium. The major metabolites are acetic, butyric and lactic acid. The major metabolites are acetic, butyric and lactic acid. Clostridium sp. ATCC No. 53464 can be used in the recovery of the strategic metals from ores and wastes and also for the production of lactic acid for commercial purposes. The process yields large quantities of lactic acid as well as lead complexed in a stable form with said acids. 4 figs., 3 tabs.

  17. Anaerobic microbial dissolution of lead and production of organic acids

    DOE Patents [OSTI]

    Francis, Arokiasamy J.; Dodge, Cleveland; Chendrayan, Krishnachetty; Quinby, Helen L.

    1988-01-01

    The present invention relates to an anaerobic bacterial culture of Clostridium sp. ATCC No. 53464 which solubilizes lead oxide under anaerobic conditions in coal and industrial wastes and therefore presents a method of removing lead from such wastes before they are dumped into the environment. The rate of lead dissolution during logarithmic growth of the bacteria in 40 ml medium containing 3.32 .mu.moles of lead as lead oxide was 0.042 .mu.moles ml.sup.-1 hr.sup.-1. Dissolution of lead oxide by the bacterial isolate is due to the production of metabolites and acidity in the culture medium. The major metabolites are acetic, butyric and lactic acid. Clostridium sp. ATCC No. 53464 can be used in the recovery of strategic metals from ores and wastes and also for the production of lactic acid for commercial purposes. The process yields large quantities of lactic acid as well as lead complexed in a stable form with said acids.

  18. Numerical Model for Conduction-Cooled Current Lead Heat Loads

    SciTech Connect (OSTI)

    White, M.J.; Wang, X.L.; Brueck, H.D.; /DESY

    2011-06-10

    Current leads are utilized to deliver electrical power from a room temperature junction mounted on the vacuum vessel to a superconducting magnet located within the vacuum space of a cryostat. There are many types of current leads used at laboratories throughout the world; however, conduction-cooled current leads are often chosen for their simplicity and reliability. Conduction-cooled leads have the advantage of using common materials, have no superconducting/normal state transition, and have no boil-off vapor to collect. This paper presents a numerical model for conduction-cooled current lead heat loads. This model takes into account varying material and fluid thermal properties, varying thicknesses along the length of the lead, heat transfer in the circumferential and longitudinal directions, electrical power dissipation, and the effect of thermal intercepts. The model is validated by comparing the numerical model results to ideal cases where analytical equations are valid. In addition, the XFEL (X-Ray Free Electron Laser) prototype current leads are modeled and compared to the experimental results from testing at DESY's XFEL Magnet Test Stand (XMTS) and Cryomodule Test Bench (CMTB).

  19. OSTIblog Posts by Jeff Given | OSTI, US Dept of Energy, Office...

    Office of Scientific and Technical Information (OSTI)

    technology (IT) infrastructure up to the task of performing 40 million human ... to consistently reliable web-based services available at full capacity to our end users. ...

  20. Jian-Rong (Jeff) Li | Center for Gas SeparationsRelevant to Clean...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Postdoc in Chemistry, Miami University and Texas A&M University EFRC research: Metal-organic ... Hong-Cai Highly porous metal-organic framework sustained with 12-connected nanoscopic ...

  1. Jeff Edlund of the NNSA Production Office Y12 Site Named 2015...

    Office of Environmental Management (EM)

    He is responsible for operational oversight of the Y12 Site's Enriched Uranium Chemical Processing, Machining, and Analytical Chemistry Operations. Mr. Edlund received a plaque and ...

  2. Microsoft PowerPoint - 15.1130_Jeff Baker_Final Ultra-High Efficiency...

    Energy Savers [EERE]

    Energy Standard - World-Class Performance at Affordable Cost * Accelerated Delivery at Lower Cost and Risk to Accelerated Delivery at Lower Cost and Risk to the Government -...

  3. Microsoft Word - DOE Meeting May 6 2016 Jeff Gust Comments.docx

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... As a MISO member, MidAmerican believes RTO-wide planning and cost allocation of projects (such as the MVPs noted above) are important components of building the necessary ...

  4. OSTIblog Posts by Jeff Given | OSTI, US Dept of Energy Office...

    Office of Scientific and Technical Information (OSTI)

    The IT Infrastructure Behind OSTI's Mission Published on Dec 04, 2015 OSTI's new data center enclosure OSTI's new data center enclosure For the Office of Scientific and Technical ...

  5. $16M funding shortfall for Jeff Lab has ripple effect ( Inside Business) |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Answering Your Fuel Efficiency Questions #AskEnergySaver: Answering Your Fuel Efficiency Questions May 11, 2015 - 2:52pm Q&A Have questions about vehicle efficiency? Submit them here and our expert will answer them next week! Ask Us Now Addthis Now's your chance to ask Energy Department experts your questions about saving energy. This month, we're answering your questions about vehicle fuel efficiency. | Photo courtesy of ©iStockphoto.com/eyecrave Now's your chance to ask

  6. OSTIblog Posts by Jeff Given | OSTI, US Dept of Energy Office...

    Office of Scientific and Technical Information (OSTI)

    At OSTI, we take pride in delivering high-availability systems, which translates to consistently reliable web-based services available at full capacity to our end users. We work to ...

  7. Zinc halogen battery electrolyte composition with lead additive

    DOE Patents [OSTI]

    Henriksen, Gary L.

    1981-01-01

    This disclosure relates to a zinc halogen battery electrolyte composition containing an additive providing improved zinc-on-zinc recyclability. The improved electrolyte composition involves the use of a lead additive to inhibit undesirable irregular plating and reduce nodular or dendritic growth on the electrode surface. The lead-containing electrolyte composition of the present invention appears to influence not only the morphology of the base plate zinc, but also the morphology of the zinc-on-zinc replate. In addition, such lead-containing electrolyte compositions appear to reduce hydrogen formation.

  8. Department of Energy Recognizes Six Leading Organizations for Helping the

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. 'Go Green' | Department of Energy Six Leading Organizations for Helping the U.S. 'Go Green' Department of Energy Recognizes Six Leading Organizations for Helping the U.S. 'Go Green' October 22, 2007 - 3:21pm Addthis 2007 National Green Power Supplier Award Winners WASHINGTON, DC - The U.S. Department of Energy (DOE) will recognize six leading organizations at the Seventh Annual Green Power Leadership Awards tonight in Philadelphia for advancing the development and use of "green

  9. Biographical sketch - Anne Jones | Center for Bio-Inspired Solar...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Biological Inorganic Chemistry, Chemical Reviews, Dalton Transactions, Physical Chemistry Chemical Physics, Electrochemistry Communications, Journal of Electroanalytical Chemistry...

  10. Jones County, North Carolina: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    North Carolina: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 35.0306293, -77.3324425 Show Map Loading map... "minzoom":false,"mappingservice...

  11. Anne Jones | Center for Bio-Inspired Solar Fuel Production

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Anne Harrington Deputy Administrator for Defense Nuclear Nonproliferation Anne Harrington Anne Harrington was sworn in as Deputy Administrator for Defense Nuclear Nonproliferation for the National Nuclear Security Administration in October 2010. Previously, Ms. Harrington was the Director of the U.S. National Academy of Sciences Committee on International Security and Arms Control (CISAC) a position she held from March 2005 to October 2010. While at CISAC, she managed several key studies on a

  12. Jones County, Iowa: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Junction, Iowa Martelle, Iowa Monticello, Iowa Morley, Iowa Olin, Iowa Onslow, Iowa Oxford Junction, Iowa Wyoming, Iowa Retrieved from "http:en.openei.orgw...

  13. Jones-Onslow Elec Member Corp | Open Energy Information

    Open Energy Info (EERE)

    56,736 2,076 24,111 4,679 10,879 107,097 61,415 2008-07 8,471 79,614 56,654 1,971 22,607 4,668 10,442 102,221 61,322 2008-06 6,356 61,755 56,244 1,774 20,036 4,651 8,130 81,791...

  14. INTRODUCTION TO SCINTILLATION LIGHT IN LIQUID ARGON Ben Jones, MIT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Department of Energy INTERACTIVE: Energy Intensity and Carbon Intensity by the Numbers INTERACTIVE: Energy Intensity and Carbon Intensity by the Numbers February 19, 2016 - 11:53am Addthis Daniel Wood Daniel Wood Data Visualization and Cartographic Specialist, Office of Public Affairs Watch our CO2 drop dramatically compared to other countries in this interactive Curious about the total amount of carbon we emit into the atmosphere? Compare countries from around the globe using this tool. If

  15. Microsoft PowerPoint - NTPAHWG_Jones [Compatibility Mode]

    Office of Environmental Management (EM)

    FY-2014 Results - and Their Importance Alex R. Larzelere Federal Program Manager, Modeling and Simulation Energy Innovation Hub Office of Nuclear Energy U.S. Department of Energy December 10, 2014 2 Understanding Complex Physical Processes Well Understood Initial Conditions Well Characterized Effects Limited Theoretical and Experimental Insight Into Physical Processes Level of Insight Observation are Limited Due to Conditions Being - Too Short or Too Long Time & Length Scales - Too Hazardous

  16. Achieve Widespread Grid Price Parity Rebecca Jones-Albertus

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    are shown. Finally, a scenario for the technological progress needed to reach even lower electricity costs, in order to enable even greater PV deployment beyond the 2020...

  17. Microsoft PowerPoint - NTPAHWG_Jones [Compatibility Mode

    Office of Environmental Management (EM)

    More economical More user-oriented Easier to maintain and update ESRI ArcGIS recommended as tool development platform Analyze alternative routing criteria ...

  18. Poyneer, L A; Bauman, B; Cornelissen, S; Jones, S; Macintosh...

    Office of Scientific and Technical Information (OSTI)

    ACTUATORS; ALGORITHMS; CALIBRATION; CLOSED-LOOP CONTROL; MIRRORS; MITIGATION; OPTICS We briefly review the development history of the Gemini Planet Imager's 4K Boston...

  19. President Obama to Honor Nation's Leading Scientists and Innovators...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    President Obama to Honor Nation's Leading Scientists and Innovators January 22, 2016 - 10:59am Addthis Original content from Whitehouse.gov The White House announced the latest ...

  20. NATIONAL LEAD COMPANY OF OHIO HEALTH AND SAFETY DIVISION - ANALYTICAL...

    Office of Legacy Management (LM)

    J &' fi -35-24 saps RUSH NATIONAL LEAD COMPANY OF OHIO HEALTH AND SAFETY DIVISION - ANALYTICAL DEPT. ANALYTICAL DATA SHEET ULO-n&s-736 (REV. 8u591 -----" . . . , -.-.-- ....

  1. Leading Edge Erosion Phase II Wind Tunnel Test Begins

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Wind tunnel testing is commencing for the second phase of the leading edge erosion project, which is a collaboration between Texas A&M, UC Davis, and Sandia. During the 2012 fiscal ...

  2. Method and apparatus for diagnosis of lead toxicity

    DOE Patents [OSTI]

    Rosen, John F.; Slatkin, Daniel N.; Wielopolski, Lucian

    1989-01-01

    Improved methods and apparatus for in vivo measurement of the skeletal lead burden of a patient and for diagnosis of lead toxicity are disclosed. The apparatus comprises an x-ray tube emitting soft low energy x-rays from a silver anode, a polarizer for polarizing the emitted x-rays, and a detector for detecting photons fluoresced from atoms in the patient's tibia upon irradiation by the polarized x-rays. The fluoresced photons are spectrally analyzed to determine their energy distribution. Peaks indicating the presence of lead are identified if the patient has relatively high bone lead content. The data may be compared to data recorded with respect to a similar test performed on patients having also had the conventional EDTA chelation tests performed thereon in order to correlate the test results with respect to a particular patient to the conventionally accepted EDTA chelation test.

  3. Lab Discovery: Water Leads to Chemical that "Gunks Up" Biofuels...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lab Discovery: Water Leads to Chemical that "Gunks Up" Biofuels Production November 20, 2014 - 12:16pm Addthis In this episode of 90 Seconds of Discovery, Catalysis Scientist ...

  4. Leading the Charge: Jana Ganion Advances Blue Lake Rancheria...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... We just received initial Notice of Proposed Award for a 500-kW ground-mounted solar array with a grid storage battery system, controlled with leading-edge microgrid technology. If ...

  5. WPN 08-6: Interim Lead-Safe Weatherization Guidance

    Broader source: Energy.gov [DOE]

    To provide additional guidance for an LSW component of a health and safety plan. This guidance builds on the foundation provided in WPN 02-6, Weatherization Activities and Federal Lead Based Paint Regulations.

  6. Eliot Feibush leads new Princeton consortium to visualize Big...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Eliot Feibush leads new Princeton consortium to visualize Big Data By John Greenwald April 22, 2015 Tweet Widget Google Plus One Share on Facebook Eliot Feibush (Photo by Elle ...

  7. Eliot Feibush leads new Princeton consortium to visualize Big...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Eliot Feibush leads new Princeton consortium to visualize Big Data By John Greenwald April 20, 2015 Tweet Widget Google Plus One Share on Facebook Eliot Feibush (Photo by Elle ...

  8. Researchers Achieve Breakthrough in Solving Leading Cause of Gearbox Failures

    Broader source: Energy.gov [DOE]

    Accomplishing a significant milestone, researchers from the U.S. Department of Energy’s Argonne National Laboratory have successfully replicated the leading cause of wind turbine gearbox failures,...

  9. The Source of Airborne Lead: Recycling Pb-Contaminated Soils

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    correspondingly 2,3. Despite this dramatic improvement in both exposure risk and body burden of Pb, the sources and health threat of the low levels of lead in our...

  10. Department of Energy Recognizes Six Leading Organizations for...

    Energy Savers [EERE]

    October 22, 2007 - 3:21pm Addthis 2007 National Green Power Supplier Award Winners WASHINGTON, DC - The U.S. Department of Energy (DOE) will recognize six leading organizations at ...

  11. Updating about reductions of air and blood lead concentrations in Turin, Italy, following reductions in the lead content of gasoline

    SciTech Connect (OSTI)

    Bono, R.; Pignata, C.; Gilli, G.

    1995-07-01

    Considering its well known toxicity and the chronic human exposure to lead, international lawmakers enforced some directives or laws calling for the reduction of lead content in gasoline. All of these legislative acts aimed to reduce health risks for the general population. The aim of this study was to consider the effectiveness of these laws on air lead levels and consequently on blood lead levels in a randomly selected urban Italian population. In particular, these markers were analyzed over the course of several years, corresponding to the periods just before and after enforcements of the reductions of lead in petrol. Data presented point out some considerations: (1) enforcement of legislative measures concerning the reduction of lead in petrol has reduced atmospheric levels of lead. This result demonstrates a major environmental success in primary prevention efforts. (2) This success is clear especially considering that the actual Pb-B levels can be extended to the urbanized populations. Pb-B levels were consistently higher for drinkers, for older adults and for males. The mean of Pb-B level for the present urbanized population is higher than the U.S. overall population (6.4 vs 3 {mu}g/dl). This difference can be also explained considering the different historical period of enforcement of the restriction laws. 10 refs., 3 figs., 3 tabs.

  12. Volunteers Leading Technology, A Case Study: Chewonki Renewable Hydrogen

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Project | Department of Energy Volunteers Leading Technology, A Case Study: Chewonki Renewable Hydrogen Project Volunteers Leading Technology, A Case Study: Chewonki Renewable Hydrogen Project This presentation by Paul Faulstich focuses on the Chewonki Renewable Hydrogen Project. education_presentation_faulstich.pdf (586.19 KB) More Documents & Publications EIS-0073: Final Environmental Impact Statement EIS-0063: Final Environmental Impact Statement EIS-0063: Draft Environmental Impact

  13. Leads | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Leads Human Subjects Protection Program (HSPP) HSPP Home About For Researchers For IRB Managers / Administrators For IRB Members For Institutional Officials For Prospective Human Subjects Leads Annual Reports Institutional Review Boards (IRBs) Education and Resources Regulations and Requirements Glossary Abbreviations Contact BER Home Contact Information Human Subjects Protection Program U.S. Department of Energy SC-23/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 About

  14. DOE-Idaho Leads Regional Combined Federal Campaign

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE NEWS RELEASE DOE-Idaho Leads Regional Combined Federal Campaign FOR IMMEDIATE RELEASE December 5, 2007 Media Contact: Brad Bugger, (208) 526-8484 The U.S. Department of Energy's Idaho Operations Office is once again leading the regional Combined Federal Campaign, which is the only sanctioned charitable campaign for all federal employees. Idaho Operations Office staff evaluates applications from local non-profit organizations who want to be included in the Combined Federal Campaign, to make

  15. WIPP's Mine Rescue Teams Lead Competition | Department of Energy

    Office of Environmental Management (EM)

    WIPP's Mine Rescue Teams Lead Competition WIPP's Mine Rescue Teams Lead Competition July 30, 2013 - 12:00pm Addthis WIPP’s mine rescue team members, back row from left, are NWP President and Project Manager Farok Sharif; Heath Fowler; Manny Marquez; Mat Ridgway; Gary Kessler; Curtis Sanders, III; Jim Pierce; Tony Mihelic; Joe Baca; Justin Bailey; Ty Zimmerly; Fabian Carrasco; Chauncey Ortega; Nico Dominguez; and CBFO Manager Joe Franco. In front are Richard West, team trainer; and Ann

  16. Lead-free Thin Film Piezoelectric Devices - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vehicles and Fuels Vehicles and Fuels Find More Like This Return to Search Lead-free Thin Film Piezoelectric Devices Lawrence Berkeley National Laboratory Contact LBL About This Technology Technology Marketing SummaryIn a breakthrough discovery, Ramamoorthy Ramesh, Robert Zeches, and their research team at Berkeley Lab have developed a technology for lead-free piezoelectric materials using thin-film bismuth ferrite. In addition to being less hazardous to human health and the environment, the

  17. Secretaries Chu and Salazar Lead Administration Team Offering Federal

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Scientific and Technological Support to BP Engineers | Department of Energy Lead Administration Team Offering Federal Scientific and Technological Support to BP Engineers Secretaries Chu and Salazar Lead Administration Team Offering Federal Scientific and Technological Support to BP Engineers May 12, 2010 - 12:00am Addthis HOUSTON, TX -- At the request of the President, Secretary Chu and Secretary Salazar traveled to Houston today to participate in meetings with DOE and national lab staff,

  18. Richard Gerber Named New NERSC User Services Group Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Richard Gerber New NERSC User Services Group Lead Richard Gerber Named New NERSC User Services Group Lead December 12, 2013 RichardGerber.jpg Richard Gerber Richard Gerber has been named leader of the NERSC User Services Group (USG), effective immediately. He takes over for Katie Antypas, who was appointed head of the NERSC Services Department in September. In his new role, Gerber will be responsible for managing a group that works to increase the scientific productivity of NERSC's 4,700 users.

  19. Weerts to lead Physical Sciences and Engineering directorate | Argonne

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Laboratory Weerts to lead Physical Sciences and Engineering directorate By Lynn Tefft Hoff * August 10, 2015 Tweet EmailPrint Hendrik (Harry) Joseph Weerts has been named the associate laboratory director for the Physical Sciences and Engineering (PSE) directorate at the U.S. Department of Energy's Argonne National Laboratory. Weerts has served in the role on an interim basis since May 2014. As part of Argonne's senior management team, Weerts will lead the PSE directorate and its

  20. Solar Decathlon 2015: Nation's Leading Sustainable Home Design

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Competition on the Horizon | Department of Energy Decathlon 2015: Nation's Leading Sustainable Home Design Competition on the Horizon Solar Decathlon 2015: Nation's Leading Sustainable Home Design Competition on the Horizon July 13, 2015 - 2:15pm Addthis The New York City College of Technology is weatherproofing its house, called DURA, at a Brooklyn Navy Yard construction site. | Photo courtesy of New York City College of Technology. The New York City College of Technology is weatherproofing

  1. EM Selects Ralph Holland to Lead Consolidated Business Center | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Selects Ralph Holland to Lead Consolidated Business Center EM Selects Ralph Holland to Lead Consolidated Business Center August 10, 2015 - 2:00pm Addthis Ralph Holland, Environmental Management Consolidated Business Center Ralph Holland, Environmental Management Consolidated Business Center WASHINGTON, D.C. - EM has named Ralph Holland director of the Environmental Management Consolidated Business Center (EMCBC) in Cincinnati. Holland has served in various contracting, supervisory,

  2. Energy recovery experiment could lead way to new accelerators | Jefferson

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab recovery experiment could lead way to new accelerators One of four BE magnets Corey Butler, mechanical designer; (left to right) Alex Bogacz, CASA staff scientist and experiment co-spokesman; and Robby Hicks, mechanical engineer, stand with one of the four BE magnets and a section of vacuum chamber built by the Machine Shop specifically for the Energy Recovery experiment. Energy recovery experiment could lead way to new accelerators March 6, 2003 Jefferson Lab physicists will soon begin

  3. President Obama to Honor Nation's Leading Scientists and Innovators |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy President Obama to Honor Nation's Leading Scientists and Innovators President Obama to Honor Nation's Leading Scientists and Innovators January 22, 2016 - 10:59am Addthis Original content from Whitehouse.gov The White House announced the latest recipients of the National Medal of Science and National Medal of Technology and Innovation-our Nation's highest honors for achievement and leadership in advancing the fields of science and technology. The new awardees will

  4. Institute for Advanced Composites Helping America Lead on Clean Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing | Department of Energy Institute for Advanced Composites Helping America Lead on Clean Energy Manufacturing Institute for Advanced Composites Helping America Lead on Clean Energy Manufacturing June 18, 2015 - 4:28pm Addthis Assistant Secretary for Energy Efficiency and Renewable Energy Dr. David Danielson speaks during the launch of the Institute for Advanced Composites Manufacturing Innovation in Knoxville, Tennessee. | Photo courtesy of Oak Ridge National Laboratory.

  5. Inspiration from world-class scientists leads Patricia Langan to

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    nanoscience Inspiration from world-class scientists leads student to nanoscience Inspiration from world-class scientists leads Patricia Langan to nanoscience Graduate research assistant discovered her passion while interning as an undergraduate student in the Bioscience Division. August 1, 2012 Patricia Langan Patricia Langan has been a student for five years now. After graduating with a B.S in Molecular, Cell and Developmental Biology from the University of California, Santa Cruz, she

  6. 2016 Leading Rater Round Table Report | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Leading Rater Round Table Report 2016 Leading Rater Round Table Report A dramatic movement to zero energy ready homes is just beginning. This includes statewide codes, large developments, and a growing commitment to the DOE Zero Energy Ready Home program. Continued progress will rely on an increasing number of Home Energy Rating System (HERS) raters effectively bringing the business case, technical solutions, and verification services for Zero Energy Ready Home to our nation's builders. At this

  7. A Minority Serving Institution Leads the Way in Better Buildings |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy A Minority Serving Institution Leads the Way in Better Buildings A Minority Serving Institution Leads the Way in Better Buildings July 5, 2012 - 6:06pm Addthis Secretary Chu visits Delaware State University to commemorate the school's efforts with the Better Buildings Initiative. Secretary Chu visits Delaware State University to commemorate the school's efforts with the Better Buildings Initiative. Dot Harris Dot Harris Director, Office of Economic Impact and Diversity

  8. Questions about how plants die leads to climate change answers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Questions about how plants die leads to climate change answers Questions about how plants die leads to climate change answers Understanding mechanisms of mortality will provide important input to future climate forecasts. March 12, 2012 Tree in the desert The scientists' goal is to provide basic insights into questions such as how plants die, especially during drought. While the question of plant mortality is easy to conceptualize, it is difficult to study because of the spatial and temporal

  9. United States Regains Lead with World's Fastest Supercomputer |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Regains Lead with World's Fastest Supercomputer United States Regains Lead with World's Fastest Supercomputer June 18, 2012 - 2:02pm Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON - Energy Secretary Steven Chu today announced that a supercomputer called Sequoia at Lawrence Livermore National Laboratory (LLNL) in Livermore, California, received the rank of the world's most powerful computing system. The Top500 list, which annually ranks the world's fastest

  10. Lead Research and Development Activity for High Temperature, Low Relative

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Humidity Membrane Program | Department of Energy Lead Research and Development Activity for High Temperature, Low Relative Humidity Membrane Program Lead Research and Development Activity for High Temperature, Low Relative Humidity Membrane Program A presentation to the High Temperature Membranes Working Group meeting, May 19, 2006. fenton.pdf (448.4 KB) More Documents & Publications Discussion Overview In Plane Conductivity Testing, BekkTech LLC Progress and Status on Through-Plane

  11. Leading Edge Technology in Diesel Emissions Control | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Leading Edge Technology in Diesel Emissions Control Leading Edge Technology in Diesel Emissions Control Poster presented at the 16th Directions in Engine-Efficiency and Emissions Research (DEER) Conference in Detroit, MI, September 27-30, 2010. p-02_roberts.pdf (193.56 KB) More Documents & Publications NO2 Management in Diesel Exhaust System Experimental Evaluation of DOC Performance Using Secondary Fuel Injection Low Temperature Catalyst for Fuel Injection System

  12. Leading the Charge: Chairman Vig Champions Progress, Sustainability |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Chairman Vig Champions Progress, Sustainability Leading the Charge: Chairman Vig Champions Progress, Sustainability October 20, 2014 - 5:00pm Addthis A photo of Chairman Vig. Change doesn't happen on its own. It's led by dedicated and passionate people who are committed to empowering Indian Country to energize future generations. Leading the Charge is a regular feature spotlighting the movers and shakers in energy on tribal lands. This issue we had the opportunity to

  13. Leading the Nation in Clean Energy Deployment | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Leading the Nation in Clean Energy Deployment Leading the Nation in Clean Energy Deployment This document summarizes key efforts and projects that are part of the DOE/NREL Integrated Deployment effort to integrated energy efficiency and renewable energy technologies in cities, states, island locations, and communities around the world. id_overview.pdf (569.07 KB) More Documents & Publications A Tale of Two Cities: Greensburg Rebuilds as a National Model for Green Communities (Fact Sheet)

  14. Imagine Tomorrow: Student Competition Leads to Innovative Biofuel Ideas |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Imagine Tomorrow: Student Competition Leads to Innovative Biofuel Ideas Imagine Tomorrow: Student Competition Leads to Innovative Biofuel Ideas May 28, 2014 - 9:20am Addthis Watch the video above to learn more about the Imagine Tomorrow competition. Leslie Ovard Bioenergy Policy Specialist, Bioenergy Technologies Office Can you imagine if solar panels could be used to grow algae for fuel? Or if your morning coffee could not only get your day started, but also serve as a

  15. Lab Breakthrough: Fusion Research Leads to Antiterrorism Device |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Fusion Research Leads to Antiterrorism Device Lab Breakthrough: Fusion Research Leads to Antiterrorism Device June 26, 2012 - 12:17pm Addthis Researchers at the Princeton Plasma Physics Laboratory developed an antiterrorism device that can detect and identify sources of dangerous radiation that could be used in a dirty bomb. See the other Lab Breakthrough videos on the YouTube playlist. Michael Hess Michael Hess Former Digital Communications Specialist, Office of Public

  16. Cooperative Catalyst leads to Transformative Results | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cooperative Catalyst leads to Transformative Results Capitalizing on the concept that everything proceeds faster with a little cooperation, researchers showed how designing cooperation into solid catalysts leads to enormous benefits.Catalysts attached to a porous solid support are preferred industrially because they are easier to separate from liquid products and reuse. But, these bound catalysts typically do not perform as well and probing their interiors to figure out how to improve them has

  17. Glass composition development for stabilization of lead based paints

    SciTech Connect (OSTI)

    Marra, J.C.

    1996-10-01

    Exposure to lead can lead to adverse health affects including permanent damage to the central nervous system. Common means of exposure to lead are from ingestion of lead paint chips or breathing of dust from deteriorating painted surfaces. The U.S. Army has over 101 million square feet of buildings dating to World War II or earlier. Many of these structures were built before the 1978 ban on lead based paints. The U.S. Army Corps of Engineers CERL is developing technologies to remove and stabilize lead containing organic coatings. Promising results have been achieved using a patented flame spray process that utilizes a glass frit to stabilize the hazardous constituents. When the glass frit is sprayed onto the paint containing substrate, differences in thermal expansion coefficients between the frit and the paint results in spalling of the paint from the substrate surface. The removed fragments are then collected and remelted to stabilize the hazardous constituents and allow for disposal as non-hazardous waste. Similar successful results using a patented process involving microwave technology for paint removal have also been achieved. In this process, the painted surface is coated with a microwave coupling compound that when exposed to microwave energy results in the spalling of the hazardous paint from the surface. The fragments can again be accumulated and remelted for stabilization and disposal.

  18. MERCURY AND LEAD SAMPLING AT MINNESOTA POWER'S BOSWELL ENERGY CENTER

    SciTech Connect (OSTI)

    Dennis L. Laudal

    2000-08-01

    At the request of the Minnesota Power, Inc., the Energy & Environmental Research Center (EERC) sampled for lead at the stack (or duct directly leading to the stack) for three units at the Boswell Energy Center. All sampling was done in triplicate using U.S. Environmental Protection Agency (EPA) Method 12, with sampling procedures following EPA Methods 1 through 4. During the test program, lead sampling was done using EPA Method 12 in the duct at the outlet of the baghouse serving Unit 2 and the duct at the outlet of the wet particulate scrubber serving Unit 3. For Unit 4, lead sampling was done at the stack. The specific objective for the project was to determine the concentration of lead in the flue gas being emitted into the atmosphere from the Boswell Energy Center. The test program was performed during the period of May 8 through 11, 2000. This report presents the test data, sample calculations, and results, and a discussion of the lead sampling performed at the Boswell Energy Center. The detailed test data and test results, raw test data, process data, laboratory reports, and equipment calibration records are provided in Appendices A, B, and C.

  19. Vitrification of lead-based paint using thermal spray

    SciTech Connect (OSTI)

    Kumar, A.; Covey, S.W.; Lattimore, J.L.; Boy, J.H.

    1996-12-31

    Lead-based paint (LBP) primers have been used to protect steel structures from corrosion. Abrasive blasting is currently used to remove old LBP. During abrasive blasting a containment structure is required to keep the hazardous lead dust from contaminating air, soil, or water. A thermal spray vitrification (TSV) process to remove LBP was developed. Dried glass powder is melted in the high temperature flame of the thermal spray torch. When the glass strikes the substrate it is molten and reacts with the paint on the substrate. The organic components of the paint are pyrolyzed, while the lead ions are trapped on the surface of glass. The quenching stresses in the glass cause the glass to crack and spall off the substrate. The crumbled glass fragments can be collected and remelted, immobilizing the lead ions within the glass network, thereby preventing leaching. The resulting glass can be disposed of as non-hazardous waste. The process is dust-free, eliminating the need for containment. The volume of residue waste is less than for abrasive blasting and is nonhazardous. The concept and techniques of using the thermal spray vitrification process for the removal and the containment of lead from a section of a bridge containing lead-based paint have been successfully demonstrated.

  20. Lead in human blood from children living in Campania, Italy

    SciTech Connect (OSTI)

    Amodio-Cocchieri, R.; Arnese, A.; Prospero, E.; Roncioni, A.

    1996-03-01

    Blood lead (PbB) levels were determined in children living Campania (in Naples and in a rural zone in the district of Caserta). Atmospheric lead (PbA) concentration in these considered areas was monitored for 1 yr (1993-1994). The children tested were questioned about common sources of lead, other than atmospheric relating to their living and dietary habits. The PbB levels in children living in Naples were at the 50th percentile, 18.8 {mu}g/dl in males and 13.7 {mu}g/dl in females; in children living in the rural area the median PbB levels were 8.9{mu}g/dl in males, and 9.9 {mu}g/dl in females. The annual mean values of atmospheres lead were 1.15 {plus_minus} 0.24 {mu}g/dl in Naples and 0.23 {plus_minus} 0.07 {mu}g/dl in the rural area. Significant and congruent mean differences between urban and rural sites were found in children`s blood and concurrent air lead. Considering the PbB level of 10 {mu}g/dl as the maximum level that is not associated any known adverse effect in children, the Neapolitan group can be considered at risk of chronic intoxication by lead. 18 refs., 3 figs., 4 tabs.

  1. Batteries called primary source of lead, cadmium in municipal waste

    SciTech Connect (OSTI)

    Not Available

    1989-04-01

    The US Environmental Protection Agency reports that lead-acid batteries, such as those used in automobiles, and rechargeable nickel-cadmium batteries used in consumer electronics equipment, are the primary sources of lead and cadmium in municipal trash and garbage. A report prepared for EPA analyzed existing data from 1970 to 1986 and made projections to the year 2000. Lead-acid batteries continue to constitute a major source of lead in garbage even though 80 percent of them are now recycled. As a result, EPA is calling for additional recycling of batteries. This study is an important step in implementing EPA's strategy for helping states and cities achieve the national goal of recycling and reducing 25 percent of all municipal garbage by 1992. The findings on batteries are the result of a study conducted for EPA because of concern over the levels of lead and cadmium found n ash (residue) from municipal waste incinerators. Lead and cadmium are two metals of particular concern in the solid waste stream. The metals can contaminate soil and groundwater when landfilled. They also may be found in some incinerator emissions.

  2. Energy-conserving, pollution-free extraction process for the recovery of lead from lead sulfide concentrates. Final report

    SciTech Connect (OSTI)

    Rao, Y.K.

    1981-09-01

    Research concerned with the development of a new process for the extraction of lead from lead sulfide concentrates is described. The process consists of smelting lead sulfide concentrates with lime and carbon to produce liquid lead. The sulfur in the concentrates is tied up as solid calcium sulfide residue which can be further processed to regenerate lime. No sulfur oxides are generated during the process. The off-gases consist of CO and CO/sub 2/. Coke, coal, coal-char or lignite-char may be used as reducing agents. The reduction process can be catalyzed to an appreciable degree by the addition of small concentrations of catalysts. For the most part, these catalytic substances are either pure or mixed alkali-metal salts. The present process can be applied for extracting zinc from zinc sulfide concentrates and also for the recovery of copper and nickel from their respective sulfide concentrates.

  3. Energy-conserving, pollution-free extraction process for the recovery of lead from lead sulfide concentrates. Final report

    SciTech Connect (OSTI)

    Rao, Y.K.

    1981-09-01

    Research concerned with the development of a new process for the extraction of lead from lead sulfide concentrates is described. The process consists of smelting lead sulfide concentrates with lime and carbon to produce liquid lead. The sulfur in the concentrates is tied up as solid calcium sulfide residue which can be further processed to regenerate lime. No sulfur oxides are generated during the process. The off-gas consist of CO and CO/sub 2/. Coke, coal, coal-char or lignite-char may be used as reducing agents. The reduction process can be catalyzed to an appreciable degree by the addition of small concentrations of catalysts. For the most part, these catalytic substances are either pure or mixed alkali-metal salts. The present process can be applied for extracting zinc from zinc sulfide concentrates and also for the recovery of copper and nickel from their respective sulfide concentrates.

  4. Better Buildings Residential Network Peer Exchange Call Series: Generating Energy Efficiency Project Leads and Allocating Leads to Contractors

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Generating Energy Efficiency Project Leads and Allocating Leads to Contractors Call Slides and Discussion Summary February 26, 2015 Call Participants  Build It Green  City of Chula Vista  City of Philadelphia  Civic Works/Retrofit Baltimore  Clean Energy Durham  Clean Energy Works  Community Office for Resource Efficiency  Dr. Energy Saver  Efficiency Maine  Efficiency Nova Scotia  Energy Efficiency Specialists, LLC  Energy Pioneer Solutions  Greater

  5. Isotopic generator for bismuth-212 and lead-212 from radium

    DOE Patents [OSTI]

    Atcher, Robert W.; Friedman, Arnold M.; Hines, John

    1987-01-01

    A method and apparatus for providing radionuclides of bismuth-212 and lead-212. Thorium-228 and carrier solution starting material is input to a radiologically contained portion of an isotopic generator system, and radium-224 is separated from thorium-228 which is retained by a strongly basic anion exchange column. The separated radium-224 is transferred to an accessible, strongly acidic cationic exchange column. The cationic column retains the radium-224, and natural radioactive decay generates bismuth-212 and lead-212. The cationic exchange column can also be separated from the contained portion of the system and utilized without the extraordinary safety measures necessary in the contained portion. Furthermore, the cationic exchange column provides over a relatively long time period the short lived lead-212 and bismuth-212 radionuclides which are useful for a variety of medical therapies.

  6. HUD lead-based-paint abatement demonstration (FHA)

    SciTech Connect (OSTI)

    Not Available

    1991-08-01

    The toxic effects of lead on human beings, and particularly on young children, have been known for many years. Amendments to the Lead-Based Paint Poisoning Prevention Act (LPPPA) in 1987 and 1988 required the U.S. Department of Housing and Urban Development (HUD) to undertake a lead-based paint abatement demonstration program. The overall objective of the demonstration was to 'utilize a sufficient number of abatement methods in a sufficient number of areas and circumstances to demonstrate their relative cost-effectiveness...' One component of the demonstration was conducted in HUD-owned, vacant, single-family properties and was completed in the fall of 1990. A public housing component is expected to be completed in 1991. The report describes the objectives, research design, experience and findings of the completed component, which is generally known as the FHA demonstration, named after the Federal Housing Administration, which held title to the houses.

  7. Methods for measuring lead concentrations in paint films

    SciTech Connect (OSTI)

    McKnight, M.E.; Byrd, W.E.; Roberts, W.E.; Lagergren, E.S.

    1989-12-01

    Recent legislation required the U.S. Department of Housing and Urban Development (HUD) to establish procedures to abate lead-based paint in existing HUD-assisted housing. The legislation also required HUD to assess the accuracy, precision, reliability, and safety of methods for measuring lead content of paint films and to investigate the availability of testers and samplers. The National Institute of Standards and Technology was requested to carry out the assessment. With regard to accuracy and precision of field measurements, it was concluded that: chemical spot tests when carried out by an experienced analytical chemistry technician can detect the presence of lead in paint films having concentrations in excess of 1 mg/sq cm about 90% of the time; the estimate of the precision of a field measurement procedure using lead-specific portable X-ray fluorescence (XRF) analyzers for lead concentrations near 1 mg/sq cm is + or - 0.6 mg/sq cm and the estimate of the bias is 0.2 mg/sq cm; this results in a 95% confidence interval of + or - 1.4 mg/sq cm; and based upon very preliminary measurements using the latest version of the spectrum analyzer portable XRF, the 95% confidence interval for field measurements is estimated to be + or - 0.5 mg/sq cm. In addition to field methods, standard laboratory procedures can be used to measure the lead content of paint samples to within a few percent of the quantity present over a wide range extending from less than 0.1 to over 10 mg/sq cm. Sample collection and sample dissolution procedures were also investigated.

  8. Nation Leads Wind Energy Production and Innovation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nation Leads Wind Energy Production and Innovation Nation Leads Wind Energy Production and Innovation May 11, 2016 - 12:19pm Addthis Letter from the Wind Program Director This spring edition of the Wind Program Newsletter comes at the juncture of two important events for the wind industry: the 1-year anniversary of the U.S. Department of Energy Wind Program's historic Wind Vision Report and the start of American Wind Energy Association (AWEA) WINDPOWER 2016. We have quite a bit to celebrate this

  9. Research Leads to Improved Fuel Yields from Smaller Antenna Algae |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Research Leads to Improved Fuel Yields from Smaller Antenna Algae Research Leads to Improved Fuel Yields from Smaller Antenna Algae May 13, 2014 - 12:06pm Addthis Tasios Melis (center) shows plates with tla3 algae and its parent strain to Katie Randolph (left) and Sunita Satyapal during a site visit to his lab at the University of California, Berkeley. Tasios Melis (center) shows plates with tla3 algae and its parent strain to Katie Randolph (left) and Sunita Satyapal

  10. Fundamental studies and new applications of hybrid lead halide perovskites*

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | MIT-Harvard Center for Excitonics Fundamental studies and new applications of hybrid lead halide perovskites* November 10, 2015 at 4:30pm/Duboc Room: 4-331 Riccardo Comin University of Toronto comin-1 In recent years light-harvesting devices based on a new class of organometallic lead iodide perovskites (CH3NH3PbI3) were demonstrated to exhibit power conversion efficiencies beyond 20%, rapidly approaching the performance of commercial silicon-based modules. Besides photovoltaics, important

  11. GE leads the way in photonics research | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GE continues leading role in photonics industry - from LED to digital x-ray Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) GE continues leading role in photonics industry - from LED to digital x-ray Danielle Merfeld, Ph.D. 2015.07.27 Vice President Joseph Biden joined New York Gov. Andrew Cuomo in Rochester, New York

  12. INFOGRAPHIC: Better Buildings Leading to Big Energy Savings | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Better Buildings Leading to Big Energy Savings INFOGRAPHIC: Better Buildings Leading to Big Energy Savings May 11, 2016 - 12:35pm Addthis Better Buildings partners have saved more than $1.3 billion on energy costs. Our new infographic explains how Better Buildings works and why it’s important. | Graphic by <a href="/node/1332956">Carly Wilkins</a>, Energy Department Better Buildings partners have saved more than $1.3 billion on energy costs. Our new

  13. Comparison of leading parallel NAS file systems on commodity hardware

    SciTech Connect (OSTI)

    Hedges, R; Fitzgerald, K; Gary, M; Stearman, D M

    2010-11-08

    High performance computing has experienced tremendous gains in system performance over the past 20 years. Unfortunately other system capabilities, such as file I/O, have not grown commensurately. In this activity, we present the results of our tests of two leading file systems (GPFS and Lustre) on the same physical hardware. This hardware is the standard commodity storage solution in use at LLNL and, while much smaller in size, is intended to enable us to learn about differences between the two systems in terms of performance, ease of use and resilience. This work represents the first hardware consistent study of the two leading file systems that the authors are aware of.

  14. Saturation of the leading spike growth in backward Raman amplifiers

    SciTech Connect (OSTI)

    Malkin, V. M.; Fisch, N. J.; Toroker, Z.

    2014-09-15

    Backward Raman amplification of laser pulses in plasmas can produce nearly relativistic unfocused output intensities and multi-exawatt powers in compact devices. The largest achievable intensity depends on which of major competitive processes set this limit. It is shown here that the relativistic electron nonlinearity can cause saturation of the leading amplified spike intensity before filamentation instabilities develop. A simple analytical model for the saturation, which supports numerical simulations, is suggested. The upper limit for the leading output spike unfocused intensity is calculated.

  15. Cities Leading through Energy Analysis and Planning | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Us » Initiatives & Projects » Cities Leading through Energy Analysis and Planning Cities Leading through Energy Analysis and Planning Find energy use data for your city! Find energy use data for your city! Read more View this infographic to learn more about the Cities-LEAP report. View this infographic to learn more about the Cities-LEAP report. Read more Cities-LEAP analysis reveals energy focus for 20 cities. Cities-LEAP analysis reveals energy focus for 20 cities. Read more The Cities

  16. National Labs Leading Charge on Building Better Batteries | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Labs Leading Charge on Building Better Batteries National Labs Leading Charge on Building Better Batteries September 26, 2011 - 12:36pm Addthis Berkeley Lab researchers have designed a new anode -- a key component of lithium ion batteries -- made from a "tailored polymer" (pictured above at right in purple). It has a greater capacity to store energy since it can conduct electricity itself rather than using a polymer binder (such as PVDF, pictured above at left in brown) in

  17. DOE Leads National Research Program in Gas Hydrates

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy today told Congress the agency is leading a nationwide program in search of naturally occurring natural gas hydrates - a potentially significant storehouse of methane--with far reaching implications for the environment and the nation's future energy supplies.

  18. Reproductive toxicity of low-level lead exposure in men

    SciTech Connect (OSTI)

    Telisman, Spomenka Colak, Bozo; Pizent, Alica; Jurasovic, Jasna; Cvitkovic, Petar

    2007-10-15

    Parameters of semen quality, seminal plasma indicators of secretory function of the prostate and seminal vesicles, sex hormones in serum, and biomarkers of lead, cadmium, copper, zinc, and selenium body burden were measured in 240 Croatian men 19-52 years of age. The subjects had no occupational exposure to metals and no known other reasons suspected of influencing male reproductive function or metal metabolism. After adjusting for age, smoking, alcohol, blood cadmium, and serum copper, zinc, and selenium by multiple regression, significant (P<0.05) associations of blood lead (BPb), {delta}-aminolevulinic acid dehydratase (ALAD), and/or erythrocyte protoporphyrin (EP) with reproductive parameters indicated a lead-related increase in immature sperm concentration, in percentages of pathologic sperm, wide sperm, round sperm, and short sperm, in serum levels of testosterone and estradiol, and a decrease in seminal plasma zinc and in serum prolactin. These reproductive effects were observed at low-level lead exposure (BPb median 49 {mu}g/L, range 11-149 {mu}g/L in the 240 subjects) common for general populations worldwide. The observed significant synergistic effect of BPb and blood cadmium on increasing serum testosterone, and additive effect of a decrease in serum selenium on increasing serum testosterone, may have implications on the initiation and development of prostate cancer because testosterone augments the progress of prostate cancer in its early stages.

  19. Next-to-leading order predictions for WW + jet production

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Campbell, John M.; Miller, David J.; Robens, Tania

    2015-07-28

    In this study we report on a next-to-leading order calculation of WW + jet production at hadron colliders, with subsequent leptonic decays of the W bosons included. The calculation of the one-loop contributions is performed using generalized unitarity methods in order to derive analytic expressions for the relevant amplitudes. These amplitudes have been implemented in the parton-level Monte Carlo generator mcfm, which we use to provide a complete next-to-leading order calculation. Predictions for total cross sections, as well as differential distributions for several key observables, are computed both for the LHC operating at 14 TeV as well as for amore » possible future 100 TeV proton-proton collider.« less

  20. Next-to-leading order predictions for WW + jet production

    SciTech Connect (OSTI)

    Campbell, John M.; Miller, David J.; Robens, Tania

    2015-07-28

    In this study we report on a next-to-leading order calculation of WW + jet production at hadron colliders, with subsequent leptonic decays of the W bosons included. The calculation of the one-loop contributions is performed using generalized unitarity methods in order to derive analytic expressions for the relevant amplitudes. These amplitudes have been implemented in the parton-level Monte Carlo generator mcfm, which we use to provide a complete next-to-leading order calculation. Predictions for total cross sections, as well as differential distributions for several key observables, are computed both for the LHC operating at 14 TeV as well as for a possible future 100 TeV proton-proton collider.

  1. An alternative to removing lead-based paint: Overcoating

    SciTech Connect (OSTI)

    Vernon, L.S.

    1996-02-01

    The case of repairing a municipal water tank coated with lead-based paint (LBP) is used to illustrate some of the benefits of overcoating, a possible alternative to removing failing paint. The paper discusses data regarding performance of the waterborne acrylic used in the case study, briefly reviews revisions to specifications for the coating`s use, and offers some costs by which to compare use of a waterborne encapsulant such as that used in the case study with either removal and recoating or use of a solvent-borne encapsulant. A surface-tolerant, water-based, corrosion-resistant acrylic was selected to overcoat the LBP. By cleaning and overcoating the existing adherent LBP using the acrylic coating, chances of lead exposure to workers and the public were reduced. Eliminating abrasive blasting and the need for full containment saved about $80,000 to $100,000.

  2. Entropically stabilized local dipole formation in lead chalcogenides.

    SciTech Connect (OSTI)

    Bozin, E. S.; Malliakas, C. D.; Souvatzis, P.; Proffen, T.; Spaldin, N. A.; Kanatzidis, M. G.; Billinge, S. J. L.; Materials Science Division; Brookhaven Nat. Lab.; Northwestern Univ.; Los Alamos Nat. Lab.; ETH, Zurich; Columbia Univ.

    2010-12-17

    We report the observation of local structural dipoles that emerge from an undistorted ground state on warming, in contrast to conventional structural phase transitions in which distortions emerge on cooling. Using experimental and theoretical probes of the local structure, we demonstrate this behavior in binary lead chalcogenides, which were believed to adopt the ideal, undistorted rock-salt structure at all temperatures. The behavior is consistent with a simple thermodynamic model in which the emerging dipoles are stabilized in the disordered state at high temperature due to the extra configurational entropy despite the fact that the undistorted structure has lower internal energy. Our findings shed light on the anomalous electronic and thermoelectric properties of the lead chalcogenides. Similar searches may show that the phenomenon is more widespread.

  3. Lead and cadmium concentrations in livestock bred in Campania, Italy

    SciTech Connect (OSTI)

    Amodio-Cocchieri, R.; Fiore, P.

    1987-09-01

    Among the various aspects of environmental pollution, special attention must be directed to heavy metals, which show a remarkable tendency to accumulate in tissues and organs of animals and humans. Particularly, lead and cadmium are of great concern when one considers that the variety of their uses has increased their level in the environment and that they have been identified as the causes of several clinical problems. Since heavy metals may be used as indicators of industrial contamination, the Italian Ministry of Health started a research program concerning the lead and cadmium levels in meat, cow's milk and eggs produce by Italian livestock and in well water, and in local and industrial feeds tuffs employed in their breeding. This is the object of the present study carried out in the Campania province.

  4. NREL Technique Leads to Improved Perovskite Solar Cells - News Releases |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL NREL Technique Leads to Improved Perovskite Solar Cells August 1, 2016 Photo shows a man looking at a handful of solar cells made of perovskite. NREL researcher Mengjin Yang examines hybrid perovskite solar cells in his lab. (Photo by Dennis Schroeder / NREL) Scientists at the Energy Department's National Renewable Energy Laboratory (NREL), in collaboration with researchers at Shanghai Jiao Tong University (SJTU), devised a method to improve perovskite solar cells, making them more

  5. Huizenga leads safety of spent fuel management, radioactive waste

    National Nuclear Security Administration (NNSA)

    management meeting in Vienna | National Nuclear Security Administration | (NNSA) Huizenga leads safety of spent fuel management, radioactive waste management meeting in Vienna Tuesday, May 26, 2015 - 12:10pm NNSA Blog David Huizenga, NNSA's Principal Assistant Deputy Administrator for Defense Nuclear Nonproliferation, recently served as president of the Fifth Review Meeting of the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management at the

  6. Materials Physics and Applications Division Lead | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) Materials Physics and Applications Division Lead Antoinette Taylor Toni Taylor November 2009 Los Alamos National Laboratory Fellow Six Los Alamos scientists have been designated 2009 Los Alamos National Laboratory Fellows in recognition of sustained, outstanding scientific contributions and exceptional promise for continued professional achievement. The title of Fellow is bestowed on only about 2 percent of the Laboratory's current technical staff. The new

  7. Greg Wilson to Lead National Center for Photovoltaics - News Releases |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Greg Stewart About Us Greg Stewart - SLAC National Accelerator Laboratory Greg Stewart is a graphic designer for SLAC National Accelerator Laboratory, one of the Department of Energy's 17 National Laboratories. Most Recent Three Ways to Bust Ghostly Dark Matter March 30 NREL

    Greg Wilson to Lead National Center for Photovoltaics November 11, 2011 Photo of Dr. Gregory M. Wilson Dr. Gregory M. Wilson has been named director of the National Center for Photovoltaics at NREL. Dr. Gregory M.

  8. NNSA labs continue to lead national solar power evaluation effort |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration | (NNSA) labs continue to lead national solar power evaluation effort Friday, June 3, 2016 - 9:37am NNSA's laboratories have unique capabilities in modeling, simulation, performance prediction, and system design because of their vital role in the nuclear security enterprise. These capabilities have perfectly enabled NNSA's Sandia National Laboratories to help make solar technology a powerful part of the future for U.S. industry. Sandia recently won a

  9. Leading the Charge: Akwesasne Housing Authority Director Retha Herne |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Charge: Akwesasne Housing Authority Director Retha Herne Leading the Charge: Akwesasne Housing Authority Director Retha Herne October 28, 2015 - 9:02am Addthis Energy-efficient homes in AHA’s Sunrise Acres Complex include such features as rooftop solar domestic hot water. Photo from Akwesasne Housing Authority. Energy-efficient homes in AHA's Sunrise Acres Complex include such features as rooftop solar domestic hot water. Photo from Akwesasne Housing Authority.

  10. Novel Nanoparticle Production Method Could Lead to Better Lights, Lenses,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solar Cells Nanoparticle Production Method Could Lead to Better Lights, Lenses, Solar Cells - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization

  11. Lester to lead ORISE's scientific and technical peer review program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lester to lead ORISE's scientific and technical peer review program FOR IMMEDIATE RELEASE June 14, 2010 FY10-42 OAK RIDGE, Tenn.-Oak Ridge Associated Universities has appointed Tony Lester as director of the Oak Ridge Institute for Science and Education's program focused on scientific peer review. Lester has been serving in this role in an acting capacity since September 2009. Tony Lester Tony Lester In his role, Lester manages a research peer review capability that coordinates the use of

  12. Director Arvizu Named Leading Hispanic in Science and Technology - News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Releases | NREL Director Arvizu Named Leading Hispanic in Science and Technology Organization Promoting Technology Careers Awards Arvizu Highest Honor October 13, 2008 Dan Arvizu, who has served as director of the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) since 2005, was inducted into the Hispanic Engineer National Achievement Awards Conference (HENAAC) Hall of Fame at a ceremony in Houston, Texas on Saturday. The Hall of Fame's purpose is to

  13. Method of making a non-lead hollow point bullet

    DOE Patents [OSTI]

    Vaughn, Norman L.; Lowden, Richard A.

    2003-10-07

    The method of making a non-lead hollow point bullet has the steps of a) compressing an unsintered powdered metal composite core into a jacket, b) punching a hollow cavity tip portion into the core, c) seating an insert, the insert having a hollow point tip and a tail protrusion, on top of the core such that the tail protrusion couples with the hollow cavity tip portion, and d) swaging the open tip of the jacket.

  14. Non-lead, environmentally safe projectiles and explosives containers

    DOE Patents [OSTI]

    Lowden, Richard A.; McCoig, Thomas M.; Dooley, Joseph B.; Smith, Cyrus M.

    2001-01-16

    A solid object having controlled frangibility, such as a bullet or a container for explosives, is made by combining two different metals in proportions calculated to achieve a desired density, without using lead. A wetting material is deposited on the base constituent which is made of a relative dense, hard material. The wetting material enhances the wettability of the base constituent with the binder constituent, which is lighter and softer than the base constituent.

  15. Eliot Feibush leads new Princeton consortium to visualize Big Data |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Princeton Plasma Physics Lab Eliot Feibush leads new Princeton consortium to visualize Big Data By John Greenwald April 22, 2015 Tweet Widget Google Plus One Share on Facebook Eliot Feibush (Photo by Elle Starkman/PPPL Office of Communications) Eliot Feibush Gallery: Cross section of a tokamak plasma with red and blue colors showing direction and structure of plasma flow. (Photo by PPPL) Cross section of a tokamak plasma with red and blue colors showing direction and structure of plasma

  16. Non-lead environmentally safe projectiles and explosive container

    DOE Patents [OSTI]

    Lowden, Richard A.; McCoig, Thomas M.; Dooley, Joseph B.; Smith, Cyrus M.

    1999-06-15

    A solid object having controlled frangibility, such as a bullet or a container for explosives, is made by combining two different metals in proportions calculated to achieve a desired density, without using lead. A wetting material is deposited on the base constituent which is made of a relative dense, hard material. The wetting material enhances the wettability of the base constituent with the binder constituent, which is lighter and softer than the base constituent.

  17. New Director to lead Technology Development and Commercialization division

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | Argonne National Laboratory New Director to lead Technology Development and Commercialization division April 2, 2015 Tweet EmailPrint Suresh Sunderrajan has been appointed Director of Argonne's Technology Development and Commercialization Division (TDC), effective April 20. Sunderrajan comes to Argonne from United Technologies Corporation, where he served as Director of Innovation Business Development (IBD), the Corporate IP monetization organization. He was responsible for patent and

  18. SunShot to Lead Sessions at Solar Power International

    Office of Energy Efficiency and Renewable Energy (EERE)

    The SunShot Initiative is leading a number of educational and informational sessions at the 2016 Solar Power International conference from September 12-15 in Las Vegas. Join us as we delve into upcoming funding programs, highlight our current awardees and their innovative projects, and discuss some of the most important trends in the solar industry. See all of SunShot's events below.

  19. Non-lead environmentally safe projectiles and explosive container

    DOE Patents [OSTI]

    Lowden, R.A.; McCoig, T.M.; Dooley, J.B.; Smith, C.M.

    1999-06-15

    A solid object having controlled frangibility, such as a bullet or a container for explosives, is made by combining two different metals in proportions calculated to achieve a desired density, without using lead. A wetting material is deposited on the base constituent which is made of a relative dense, hard material. The wetting material enhances the wettability of the base constituent with the binder constituent, which is lighter and softer than the base constituent. 10 figs.

  20. Solar Test Facility Upgrades Complete, Leading to Better Sandia

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capabilities to Support Power Industry Test Facility Upgrades Complete, Leading to Better Sandia Capabilities to Support Power Industry - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power

  1. Leading the Charge: Harold Frank | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Harold Frank Leading the Charge: Harold Frank June 22, 2012 - 5:11pm Addthis Harold "Gus" Frank, Forest County Potawatomi Community Chairman and 2012 White House "Champion of Change". Photo from Potawatomi Traveling Times Harold "Gus" Frank, Forest County Potawatomi Community Chairman and 2012 White House "Champion of Change". Photo from Potawatomi Traveling Times Solar panels on the rooftop of the Forest County Potawatomi Tribe's administration building

  2. Leading the Charge: Jana Ganion Advances Blue Lake Rancheria's Climate

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Action Agenda | Department of Energy Jana Ganion Advances Blue Lake Rancheria's Climate Action Agenda Leading the Charge: Jana Ganion Advances Blue Lake Rancheria's Climate Action Agenda February 27, 2015 - 10:38am Addthis Jana Ganion is the Energy Director for the Blue Lake Rancheria. Jana Ganion is the Energy Director for the Blue Lake Rancheria. Change doesn't happen on its own. It's led by dedicated and passionate people who are committed to empowering Indian Country to energize future

  3. Leading the Charge: Jim Manion | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Jim Manion Leading the Charge: Jim Manion February 23, 2012 - 5:23pm Addthis Jim Manion, Confederated Tribes of the Warm Springs Reservation of Oregon Jim Manion, Confederated Tribes of the Warm Springs Reservation of Oregon What are the greatest energy development opportunities for Indian Country? Bring power to communities within Indian Country that currently don't have energy Create needed jobs that offer tribal members opportunities to earn incomes sufficient to support their families

  4. Leading the Charge: Tribal Women in Power | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tribal Women in Power Leading the Charge: Tribal Women in Power October 22, 2012 - 4:19pm Addthis Andrea Alexander, Makah Tribe in Neah Bay (Washington)/Affiliated Tribes of Northwest Indians Andrea Alexander, Makah Tribe in Neah Bay (Washington)/Affiliated Tribes of Northwest Indians Kathy Mayo, Eagle Village in Upper Yukon (Alaska)/Tanana Chiefs Conference Kathy Mayo, Eagle Village in Upper Yukon (Alaska)/Tanana Chiefs Conference Tara Hess-McGeown, Washoe Tribe of Nevada and

  5. NREL Leads Energy Systems Integration, Continuum Magazine: Issue 4 (Book)

    SciTech Connect (OSTI)

    Not Available

    2013-04-01

    Continuum Magazine showcases NREL's latest and most impactful clean energy innovations. This issue, 'NREL Leads Energy Systems Integration' explores the discipline of energy systems integration, in particular the role of the laboratory's new, one-of-a-kind Energy System Integration Facility. NREL scientists, engineers, and analysts deeply understand the fundamental science and technologies underpinning major energy producing and consuming systems, as well as the transmission infrastructure and communications and data networks required to integrate energy systems at all scales.

  6. Leading twist nuclear shadowing phenomena in hard processes with nuclei

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    L. Franfurt; Guzey, V.; Strikman, M.

    2012-01-08

    We present and discuss the theory and phenomenology of the leading twist theory of nuclear shadowing which is based on the combination of the generalization of Gribov-Glauber theory, QCD factorization theorems, and HERA QCD analysis of diffraction in lepton-proton deep inelastic scattering (DIS). We apply this technique for the analysis of a wide range of hard processes with nuclei-inclusive DIS on deuterons, medium-range and heavy nuclei, coherent and incoherent diffractive DIS with nuclei, and hard diffraction in proton-nucleus scattering - and make predictions for the effect of nuclear shadowing in the corresponding sea quark and gluon parton distributions. We alsomore » analyze the role of the leading twist nuclear shadowing in generalized parton distributions in nuclei and certain characteristics of final states in nuclear DIS. We discuss the limits of applicability of the leading twist approximation for small x scattering off nuclei and the onset of the black disk regime and methods of detecting it. It will be possible to check many of our predictions in the near future in the studies of the ultraperipheral collisions at the Large Hadron Collider (LHC). Further checks will be possible in pA collisions at the LHC and forward hadron production at Relativistic Heavy Ion Collider (RHIC). As a result, detailed tests will be possible at an Electon-Ion Collider (EIC) in USA and at the Large Hadron-Electron Collider (LHeC) at CERN.« less

  7. Maxima of two random walks: Universal statistics of lead changes

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ben-Naim, E.; Krapivsky, P. L.; Randon-Furling, J.

    2016-04-18

    In this study, we investigate statistics of lead changes of the maxima of two discrete-time random walks in one dimension. We show that the average number of lead changes grows asmore » $${\\pi }^{-1}\\mathrm{ln}t$$ in the long-time limit. We present theoretical and numerical evidence that this asymptotic behavior is universal. Specifically, this behavior is independent of the jump distribution: the same asymptotic underlies standard Brownian motion and symmetric Lévy flights. We also show that the probability to have at most n lead changes behaves as $${t}^{-1/4}{(\\mathrm{ln}t)}^{n}$$ for Brownian motion and as $${t}^{-\\beta (\\mu )}{(\\mathrm{ln}t)}^{n}$$ for symmetric Lévy flights with index μ. The decay exponent $$\\beta \\equiv \\beta (\\mu )$$ varies continuously with the Lévy index when $$0\\lt \\mu \\lt 2$$, and remains constant $$\\beta =1/4$$ for $$\\mu \\gt 2$$.« less

  8. Leading twist nuclear shadowing phenomena in hard processes with nuclei

    SciTech Connect (OSTI)

    Leonid Frankfurt, Vadim Guzey, Mark Strikman

    2012-03-01

    We present and discuss the theory and phenomenology of the leading twist theory of nuclear shadowing which is based on the combination of the generalization of Gribov-Glauber theory, QCD factorization theorems, and HERA QCD analysis of diffraction in lepton-proton deep inelastic scattering (DIS). We apply this technique for the analysis of a wide range of hard processes with nuclei-inclusive DIS on deuterons, medium-range and heavy nuclei, coherent and incoherent diffractive DIS with nuclei, and hard diffraction in proton-nucleus scattering - and make predictions for the effect of nuclear shadowing in the corresponding sea quark and gluon parton distributions. We also analyze the role of the leading twist nuclear shadowing in generalized parton distributions in nuclei and certain characteristics of final states in nuclear DIS. We discuss the limits of applicability of the leading twist approximation for small x scattering off nuclei and the onset of the black disk regime and methods of detecting it. It will be possible to check many of our predictions in the near future in the studies of the ultraperipheral collisions at the Large Hadron Collider (LHC). Further checks will be possible in pA collisions at the LHC and forward hadron production at Relativistic Heavy Ion Collider (RHIC). Detailed tests will be possible at an Electon-Ion Collider (EIC) in USA and at the Large Hadron-Electron Collider (LHeC) at CERN.

  9. MOX Lead Assembly Fabrication at the Savannah River Site

    SciTech Connect (OSTI)

    Geddes, R.L.; Spiker, D.L.; Poon, A.P.

    1997-12-01

    The U. S. Department of Energy (DOE) announced its intent to prepare an Environmental Impact Statement (EIS) under the National Environmental Policy Act (NEPA) on the disposition of the nations weapon-usable surplus plutonium.This EIS is tiered from the Storage and Disposition of Weapons-Usable Fissile Material Programmatic Environmental Impact Statement issued in December 1996,and the associated Record of Decision issued on January, 1997. The EIS will examine reasonable alternatives and potential environmental impacts for the proposed siting, construction, and operation of three types of facilities for plutonium disposition. The three types of facilities are: a pit disassembly and conversion facility, a facility to immobilize surplus plutonium in a glass or ceramic form for disposition, and a facility to fabricate plutonium oxide into mixed oxide (MOX) fuel.As an integral part of the surplus plutonium program, Oak Ridge National Laboratory (ORNL) was tasked by the DOE Office of Fissile Material Disposition(MD) as the technical lead to organize and evaluate existing facilities in the DOE complex which may meet MD`s need for a domestic MOX fuel fabrication demonstration facility. The Lead Assembly (LA) facility is to produce 1 MT of usable test fuel per year for three years. The Savannah River Site (SRS) as the only operating plutonium processing site in the DOE complex, proposes two options to carry out the fabrication of MOX fuel lead test assemblies: an all Category I facility option and a combined Category I and non-Category I facilities option.

  10. HUD`s lead-based paint activities

    SciTech Connect (OSTI)

    Morony, R.

    1994-12-31

    Title X of Public Law 102-550 is a major piece of legislation for the Department having to do with lead-based paint. It changes the way the Department is going to be doing all of its work with lead-based paint in all areas except public housing. It is a mandate from Congress for a great deal of change. It is going to cause revisions in the regulations. Title X authorizes a grant program to State and local governments for the abatement of lead-based paint in low income, privately owned housing. This is an area that has not gotten attention from the Federal government before. The first series of grants have been awarded, some $46 million, to six States, three cities, and one county. The grantees have been selected for $91 million that will go to 19 winners. They received 63 applications, again from State and local governments, again for privately owned housing. There is a third grant series in this fiscal year. The applications for the $142 million are due July 5, 1994. Again, HUD is looking at privately owned housing. This is not housing that is, in most cases, federally assisted in any way.

  11. USE OF CHEMICAL INVENTORY ACCURACY MEASUREMENTS AS LEADING INDICATORS

    SciTech Connect (OSTI)

    Kuntamukkula, M.

    2011-02-10

    Chemical safety and lifecycle management (CSLM) is a process that involves managing chemicals and chemical information from the moment someone begins to order a chemical and lasts through final disposition(1). Central to CSLM is tracking data associated with chemicals which, for the purposes of this paper, is termed the chemical inventory. Examples of data that could be tracked include chemical identity, location, quantity, date procured, container type, and physical state. The reason why so much data is tracked is that the chemical inventory supports many functions. These functions include emergency management, which depends upon the data to more effectively plan for, and respond to, chemical accidents; environmental management that uses inventory information to aid in the generation of various federally-mandated and other regulatory reports; and chemical management that uses the information to increase the efficiency and safety with which chemicals are stored and utilized. All of the benefits of having an inventory are predicated upon having an inventory that is reasonably accurate. Because of the importance of ensuring one's chemical inventory is accurate, many have become concerned about measuring inventory accuracy. But beyond providing a measure of confidence in information gleaned from the inventory, does the inventory accuracy measurement provide any additional function? The answer is 'Yes'. It provides valuable information that can be used as a leading indicator to gauge the health of a chemical management system. In this paper, we will discuss: what properties make leading indicators effective, how chemical inventories can be used as a leading indicator, how chemical inventory accuracy can be measured, what levels of accuracies should realistically be expected in a healthy system, and what a subpar inventory accuracy measurement portends.

  12. Polonium problem in lead-bismuth flow target

    SciTech Connect (OSTI)

    Pankratov, D.V.; Yefimov, E.I.; Bugreev, M.I.

    1996-06-01

    Alpha-active polonium nuclides Po198 - Po210 are formed in a lead-bismuth target as results of reactions Bi{sup 209}(n,{gamma})Bi{sup 210} {yields} Po{sup 210}, Bi{sup 209}(p,xn)Po{sup 210} {yields} Po{sup 210 {minus} x} (x = 1-12), Pb{sup 208}({alpha},xn) {yields} Po{sup 210 {minus} x + 2} (x = 2-14). The most important nuclides are Po-210 (T{sub {1/2}}=138.4 day), Po-209 (T{sub {1/2}}=102 years) and Po-208 (T{sub {1/2}}=2.9 years). Polonium activity of the circuit for SINQ - conditions is about 15,000 Ci after 1-year operation. Polonium radiation hazard is connected with its output from the coolant and formation of aerosol and surface alpha-activity after the circuit break-down for repair works or in accidents. One of the important issues of polonium removal system creation is containing and storing polonium removed. Its storage in solidified alkaline is not expedient because of secondary neutron formation as a result of ({alpha},n) - reaction on oxygen and sodium nucleus. The estimations carried out demonstrated that by polonium concentration {approx} 100 Ci/l neutron current on the container surface can reach {approx} 10{sup 4}n/(cm{sup 2}s). Concentration and storage of polonium in solidified lead-bisumth seems the most convenient. The calculations demonstrated that in a 100 l container 50,000 Ci of polonium can be stored (as much as 3 times more than 1-year polonium product in SINQ-conditions) under temperature in the container less than melting point of lead bismuth (the wall temperature is about 100{degrees}C).

  13. NREL Names Mark Davis to Lead Biosciences Center | Bioenergy | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL Names Mark Davis to Lead Biosciences Center June 24, 2016 Dr. Mark Davis is the new director of the Biosciences Center at the Energy Department's National Renewable Energy Laboratory (NREL). "Mark has been serving in this capacity for almost a year, and we are very excited to now have him in this position formally," said Adam Bratis, NREL's associate lab director for BioEnergy Science and Technology. The Biosciences Center is under the umbrella of the BioEnergy Science and

  14. Richard Gerber! Acting NERSC User Services Group Lead Edison Overview

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Acting NERSC User Services Group Lead Edison Overview --- 1 --- October 1 0, 2 013 Edison Addresses NERSC's Workload Needs 2 Characteris3c Descrip3on Comment Processor Intel I vy B ridge 2 .6 G Hz Fast, c u>ng---edge, c ommodity processor Node Dual---socket, 6 4 G B 1 866 M Hz m emory Large m emory p er n ode Excellent m emory b andwidth Interconnect Cray A ries, d ragonfly t opology Excellent l atency & b andwidth Excellent s caling AdapQve r ouQng e ases c ongesQon Storage 6.48 PB 140 G

  15. ESnet Internship Leads to Book Chapter on Energy Efficiency for

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Datacenters, Networks Internship Leads to Book Chapter on Energy Efficiency for Datacenters, Networks News & Publications ESnet News Media & Press Publications and Presentations Galleries ESnet Awards and Honors Contact Us Media Jon Bashor, jbashor@lbl.gov, +1 510 486 5849 or Media@es.net Technical Assistance: 1 800-33-ESnet (Inside the US) 1 800-333-7638 (Inside the US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site

  16. Dr. Dave Moody to Lead the Carlsbad Field Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ws U.S. Department of Energy Carlsbad Field Office Waste Isolation Pilot Plant P.O. Box 3090 Carlsbad, New Mexico 88221 DOENews For Immediate Release Dr. Dave Moody to lead the Carlsbad Field Office CARLSBAD, N.M., December 12, 2005 - The U.S. Department of Energy (DOE) announced today that long-time Los Alamos National Laboratory (LANL) scientist Dr. Dave Moody will be the new manager of the Carlsbad Field Office (CBFO). Moody began work December 12, filling the position that was previously

  17. Jefferson Lab is a world-leading laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jefferson Lab is a world-leading laboratory funded by the U.S. Department of Energy's Office of Science. The lab is devoted to the study of the building blocks of matter that make up 98 percent of our visible universe. Scientists from across the nation and around the world use the lab's facilities to probe the nucleus of the atom. Below: Magnets (red) focus electron beams as they speed to three experimental halls Front Cover: JLab nuclear physicists discuss particle structure equations Back

  18. Alkali-lead-iron phosphate glass and associated method

    DOE Patents [OSTI]

    Boatner, L.A.; Sales, B.C.; Franco, S.C.S.

    1994-03-29

    A glass composition and method of preparation utilizes a mixture consisting of phosphorus oxide within the range of about 40 to 49 molar percent, lead oxide within the range of about 10 to 25 molar percent, iron oxide within the range of about 10 to 17 molar percent and an alkali oxide within the range of about 23 to 30 molar percent. The glass resulting from the melting and subsequent solidifying of the mixture possesses a high degree of durability and a coefficient of thermal expansion as high as that of any of a number of metals. Such features render this glass highly desirable in glass-to-metal seal applications. 6 figures.

  19. Alkali-lead-iron phosphate glass and associated method

    DOE Patents [OSTI]

    Boatner, Lynn A.; Sales, Brian C.; Franco, Sofia C. S.

    1994-01-01

    A glass composition and method of preparation utilizes a mixture consisting of phosphorus oxide within the range of about 40 to 49 molar percent, lead oxide within the range of about 10 to 25 molar percent, iron oxide within the range of about 10 to 17 molar percent and an alkali oxide within the range of about 23 to 30 molar percent. The glass resulting from the melting and subsequent solidifying of the mixture possesses a high degree of durability and a coefficient of thermal expansion as high as that of any of a number of metals. Such features render this glass highly desirable in glass-to-metal seal applications.

  20. Collisions of deformable cells lead to collective migration

    SciTech Connect (OSTI)

    Löber, Jakob; Ziebert, Falko; Aranson, Igor S.

    2015-03-17

    Collective migration of eukaryotic cells plays a fundamental role in tissue growth, wound healing and immune response. The motion, arising spontaneously or in response to chemical and mechanical stimuli, is also important for understanding life-threatening pathologies, such as cancer and metastasis formation. We present a phase-field model to describe the movement of many self-organized, interacting cells. The model takes into account the main mechanisms of cell motility – acto-myosin dynamics, as well as substrate-mediated and cell-cell adhesion. It predicts that collective cell migration emerges spontaneously as a result of inelastic collisions between neighboring cells: collisions lead to a mutual alignment of the cell velocities and to the formation of coherently-moving multi-cellular clusters. Small cell-to-cell adhesion, in turn, reduces the propensity for large-scale collective migration, while higher adhesion leads to the formation of moving bands. Our study provides valuable insight into biological processes associated with collective cell motility.

  1. Survey of mercury, cadmium and lead content of household batteries

    SciTech Connect (OSTI)

    Recknagel, Sebastian; Radant, Hendrik; Kohlmeyer, Regina

    2014-01-15

    Highlights: • A well selected sample of 146 batteries was analysed for its heavy metals content. • A comparison was made between heavy metals contents in batteries in 2006 and 2011. • No significant change after implementation of the new EU Batteries Directive. • Severe differences in heavy metal contents were found in different battery-types. - Abstract: The objective of this work was to provide updated information on the development of the potential impact of heavy metal containing batteries on municipal waste and battery recycling processes following transposition of the new EU Batteries Directive 2006/66/EC. A representative sample of 146 different types of commercially available dry and button cells as well as lithium-ion accumulators for mobile phones were analysed for their mercury (Hg)-, cadmium (Cd)- and lead (Pb)-contents. The methods used for preparing the cells and analysing the heavy metals Hg, Cd, and Pb were either developed during a former study or newly developed. Several batteries contained higher mass fractions of mercury or cadmium than the EU limits. Only half of the batteries with mercury and/or lead fractions above the marking thresholds were labelled. Alkaline–manganese mono-cells and Li-ion accumulators, on average, contained the lowest heavy metal concentrations, while zinc–carbon batteries, on average, contained the highest levels.

  2. Collisions of deformable cells lead to collective migration

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Löber, Jakob; Ziebert, Falko; Aranson, Igor S.

    2015-03-17

    Collective migration of eukaryotic cells plays a fundamental role in tissue growth, wound healing and immune response. The motion, arising spontaneously or in response to chemical and mechanical stimuli, is also important for understanding life-threatening pathologies, such as cancer and metastasis formation. We present a phase-field model to describe the movement of many self-organized, interacting cells. The model takes into account the main mechanisms of cell motility – acto-myosin dynamics, as well as substrate-mediated and cell-cell adhesion. It predicts that collective cell migration emerges spontaneously as a result of inelastic collisions between neighboring cells: collisions lead to a mutual alignmentmore » of the cell velocities and to the formation of coherently-moving multi-cellular clusters. Small cell-to-cell adhesion, in turn, reduces the propensity for large-scale collective migration, while higher adhesion leads to the formation of moving bands. Our study provides valuable insight into biological processes associated with collective cell motility.« less

  3. Medium Power Lead Alloy Fast Reactor Balance of Plant Options

    SciTech Connect (OSTI)

    Vaclav Dosta; Pavel Hejzlar; Neil E. Todreas; Jacopo Buongiorno

    2004-09-01

    Proper selection of the power conversion cycle is a very important step in the design of a nuclear reactor. Due to the higher core outlet temperature (~550°C) compared to that of light water reactors (~300°C), a wide portfolio of power cycles is available for the lead alloy fast reactor (LFR). Comparison of the following cycles for the LFR was performed: superheated steam (direct and indirect), supercritical steam, helium Brayton, and supercritical CO2 (S-CO2) recompression. Heat transfer from primary to secondary coolant was first analyzed and then the steam generators or heat exchangers were designed. The direct generation of steam in the lead alloy coolant was also evaluated. The resulting temperatures of the secondary fluids are in the range of 530-545°C, dictated by the fixed space available for the heat exchangers in the reactor vessel. For the direct steam generation situation, the temperature is 312°C. Optimization of each power cycle was carried out, yielding net plant efficiency of around 40% for the superheated steam cycle while the supercritical steam and S-CO2 cycles achieved net plant efficiency of 41%. The cycles were then compared based on their net plant efficiency and potential for low capital cost. The superheated steam cycle is a very good candidate cycle given its reasonably high net plant efficiency and ease of implementation based on the extensive knowledge and operating experience with this cycle. Although the supercritical steam cycle net plant efficiency is slightly better than that of the superheated steam cycle, its high complexity and high pressure result in higher capital cost, negatively affecting plant economics. The helium Brayton cycle achieves low net plant efficiency due to the low lead alloy core outlet temperature, and therefore, even though it is a simpler cycle than the steam cycles, its performance is mediocre in this application. The prime candidate, however, appears to be the S-CO2 recompression cycle, because it

  4. An evaluation of worker lead exposures and cleaning effectiveness during removal of deteriorated lead-based paint

    SciTech Connect (OSTI)

    Sussell, A.; Wild, D.; Ashley, K.; Hart, C.

    1999-03-01

    The authors evaluated worker lead exposures and cleaning effectiveness during initial cleanup of 19th-century buildings with highly deteriorated lead-based paint. Eighteen rooms of similar size and condition in two university-owned buildings were selected for a pilot project to compare three methods for removing loose paint, paint chips, and dust. The methods used were: dry scraping followed by dry sweeping (no engineering or work practice controls); wet scraping and high-efficiency particulate air (HEPA) vacuuming; and the latter method with the addition of a portable HEPA-filtered exhaust fan in the room providing about 40 air changes per hour. The final step for all methods was wet-mopping once with tri-sodium phosphate solution. During a single day 18 rooms were cleaned; each of three two-person work crews cleaned six room, two with each method. Air and surface samples were collected before, during, and after cleaning. All of the methods were potentially hazardous to workers: 44% of the method-based exposures and one of five full-shift exposures exceeded the OSHA PEL.

  5. Symmetries and multiferroic properties of novel room-temperature magnetoelectrics: Lead iron tantalate – lead zirconate titanate (PFT/PZT)

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Sanchez, Dilsom A.; Ortega, N.; Kumar, Ashok; Roque-Malherbe, R.; Polanco, R.; Scott, J. F.; Katiyar, Ram S.

    2011-12-01

    Mixing 60-70% lead zirconate titanate with 40-30% lead iron tantalate produces a single-phase, low-loss, room-temperature multiferroic with magnetoelectric coupling: (PbZr₀.₅₃Ti₀.₄₇O₃) (1-x)- (PbFe₀.₅Ta₀.₅O₃)x. The present study combines x-ray scattering, magnetic and polarization hysteresis in both phases, plus a second-order dielectric divergence (to epsilon = 6000 at 475 K for 0.4 PFT; to 4000 at 520 K for 0.3 PFT) for an unambiguous assignment as a C2v-C4v (Pmm2-P4mm) transition. The material exhibits square saturated magnetic hysteresis loops with 0.1 emu/g at 295 K and saturation polarization Pr = 25 μC/cm², which actually increases (to 40 μC/cm²) in the high-T tetragonal phase, representingmore » an exciting new room temperature oxide multiferroic to compete with BiFeO₃. Additional transitions at high temperatures (cubic at T>1300 K) and low temperatures (rhombohedral or monoclinic at T<250 K) are found. These are the lowest-loss room-temperature multiferroics known, which is a great advantage for magnetoelectric devices.« less

  6. Richard Gerber! NERSC Senior Science Advisor! NERSC Training Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Training Lead NERSC Overview --- 1 --- NERSC N ew U ser T raining September 10, 2013 --- 2 --- The m ission o f t he N a.onal E nergy Research S cien.fic C ompu.ng C enter (NERSC) i s t o a ccelerate s cien.fic discovery a t t he D OE O ffice o f S cience through h igh p erformance c ompu.ng and d ata a nalysis. National Energy Research Scientific Computing Center (NERSC) * NERSC i s a n a:onal s upercomputer c enter f unded b y the U.S. Department of Energy Office of Science (SC) - Supports S C

  7. Random lasing in organo-lead halide perovskite microcrystal networks

    SciTech Connect (OSTI)

    Dhanker, R.; Brigeman, A. N.; Giebink, N. C.; Larsen, A. V.; Stewart, R. J.; Asbury, J. B.

    2014-10-13

    We report optically pumped random lasing in planar methylammonium lead iodide perovskite microcrystal networks that form spontaneously from spin coating. Low thresholds (<200??J/cm{sup 2}) and narrow linewidths (???100??m and spatially overlap with one another, resulting in chaotic pulse-to-pulse intensity fluctuations due to gain competition. These results demonstrate this class of hybrid organic-inorganic perovskite as a platform to study random lasing with well-defined, low-level disorder, and support the potential of these materials for use in semiconductor laser applications.

  8. Compatibility of structural materials with liquid bismuth, lead, and mercury

    SciTech Connect (OSTI)

    Weeks, J.R.

    1996-06-01

    During the 1950s and 1960s, a substantial program existed at Brookhaven National Laboratory as part of the Liquid Metal Fuel reactor program on the compatibility of bismuth, lead, and their alloys with structural materials. Subsequently, compatibility investigations of mercury with structural materials were performed in support of development of Rankine cycle mercury turbines for nuclear applications. The present talk will review present understanding of the corrosion/mass-transfer reactions of structural materials with these liquid metal coolants. Topics to be discussed include the basic solubility relationships of iron, chromium, nickel, and refractory metals in these liquid metals, the results of inhibition studies, the role of oxygen on the corrosion processes, and specialized topics such as cavitation-corrosion and liquid metal embrittlement. Emphasis will be placed on utilizing the understanding gained in this earlier work on the development of heavy liquid metal targets in spallation neutron sources.

  9. Atomic vapor laser isotope separation of lead-210 isotope

    DOE Patents [OSTI]

    Scheibner, Karl F.; Haynam, Christopher A.; Johnson, Michael A.; Worden, Earl F.

    1999-01-01

    An isotopically selective laser process and apparatus for removal of Pb-210 from natural lead that involves a one-photon near-resonant, two-photon resonant excitation of one or more Rydberg levels, followed by field ionization and then electrostatic extraction. The wavelength to the near-resonant intermediate state is counter propagated with respect to the second wavelength required to populate the final Rydberg state. This scheme takes advantage of the large first excited state cross section, and only modest laser fluences are required. The non-resonant process helps to avoid two problems: first, stimulated Raman Gain due to the nearby F=3/2 hyperfine component of Pb-207 and, second, direct absorption of the first transition process light by Pb-207.

  10. Atomic vapor laser isotope separation of lead-210 isotope

    DOE Patents [OSTI]

    Scheibner, K.F.; Haynam, C.A.; Johnson, M.A.; Worden, E.F.

    1999-08-31

    An isotopically selective laser process and apparatus for removal of Pb-210 from natural lead that involves a one-photon near-resonant, two-photon resonant excitation of one or more Rydberg levels, followed by field ionization and then electrostatic extraction. The wavelength to the near-resonant intermediate state is counter propagated with respect to the second wavelength required to populate the final Rydberg state. This scheme takes advantage of the large first excited state cross section, and only modest laser fluences are required. The non-resonant process helps to avoid two problems: first, stimulated Raman Gain due to the nearby F=3/2 hyperfine component of Pb-207 and, second, direct absorption of the first transition process light by Pb-207. 5 figs.

  11. Optical properties and structure of beryllium lead silicate glasses

    SciTech Connect (OSTI)

    Zhidkov, I. S.; Zatsepin, A. F.; Cholakh, S. O.; Kuznetsova, Yu. A.

    2014-10-21

    Luminescence and optical properties and structural features of (BeO){sub x}(PbO⋅SiO{sub 2}){sub 1−x} glasses (x = 0 ÷ 0.3) are investigated by means of optical absorption and photoluminescence spectroscopy and X-ray diffraction. The regularities of the formation of the optical absorption edge and static disorder are studied. It is shown that the optical absorption and luminescence are determined by transitions between localized states of lead ions. The impact of beryllium oxide on optical and luminescence properties and electronic structure of bands tails is discussed. The presence of two different concentration ranges with various short-range order structure and band tails nature has been established.

  12. Volunteers Leading Technology, A Case Study: Chewonki Renewable Hydrogen Project

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    l j l l i j Volunteers Leading Technology A Case Study: Chewonk Renewab e Hydrogen Pro ect Pau Fau st ch, Pro ect Manager � j i � li � i � l � l � Agenda Pro ect Overv ew Accomp shments Fund ng Vo unteer Labor Acknow edgements What's Next j � i l i i i i � i lly i i fi i l i l Di i i i i � i i i l i i i l i i i i i i l l i Pro ect Overview: Goals St mu ate and support ex st ng Ma ne bus nesses, Create strateg ca mportant connect ons among rms nvo ved n the Renewab e Energy and

  13. The lead-glass electromagnetic calorimeter for the SELEX experiment

    SciTech Connect (OSTI)

    M. Y. Balatz et al.

    2004-07-19

    A large-acceptance, highly segmented electromagnetic lead glass calorimeter for Experiment E781 (SELEX) at Fermi National Acceleration Laboratory was designed and built. This detector has been used to reconstruct photons and electrons with energies ranging from few GeV up to 500 GeV in the collisions of the 650 GeV {Sigma}{sup -} hyperons and {pi}{sup -} mesons with the target nucleons. The design, calibration and performance of the calorimeter are described. Energy resolution and position resolution are assessed using both calibration electron beams and {pi}{sup 0} mesons reconstructed in 650 GeV hadron-hadron interactions. The performance of the calorimeter in selecting resonant states that involve photons is demonstrated.

  14. Lightning arrestor connector lead magnesium niobate qualification pellet test procedures.

    SciTech Connect (OSTI)

    Tuohig, W.; Mahoney, Patrick A.; Tuttle, Bruce Andrew; Wheeler, Jill Susanne

    2009-02-01

    Enhanced knowledge preservation for DOE DP technical component activities has recently received much attention. As part of this recent knowledge preservation effort, improved documentation of the sample preparation and electrical testing procedures for lead magnesium niobate--lead titanate (PMN/PT) qualification pellets was completed. The qualification pellets are fabricated from the same parent powders used to produce PMN/PT lightning arrestor connector (LAC) granules at HWF&T. In our report, the procedures for fired pellet surface preparation, electrode deposition, electrical testing and data recording are described. The dielectric measurements described in our report are an information only test. Technical reasons for selecting the electrode material, electrode size and geometry are presented. The electrical testing is based on measuring the dielectric constant and dissipation factor of the pellet during cooling from 280 C to 220 C. The most important data are the temperature for which the peak dielectric constant occurs (Curie Point temperature) and the peak dielectric constant magnitude. We determined that the peak dielectric constant for our procedure would be that measured at 1 kHz at the Curie Point. Both the peak dielectric constant and the Curie point parameters provide semi-quantitative information concerning the chemical and microstructural homogeneity of the parent material used for the production of PMN/PT granules for LACs. Finally, we have proposed flag limits for the dielectric data for the pellets. Specifically, if the temperature of the peak dielectric constant falls outside the range of 250 C {+-} 30 C we propose that a flag limit be imposed that will initiate communication between production agency and design agency personnel. If the peak dielectric constant measured falls outside the range 25,000 {+-} 10,000 we also propose that a flag limit be imposed.

  15. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lighting Strong Permanent Magnets with Reduced Rare Earth Content Improving Reuse & Recycling Eric Peterson (INL), Lead Ed Jones (LLNL), Deputy Transformative Extraction &...

  16. USE OF LEAD SHIELDING Nevada National Security Site Waste Acceptance Criteria (NNSSWAC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    USE OF LEAD SHIELDING Nevada National Security Site Waste Acceptance Criteria (NNSSWAC) Container ID: Waste profile: NOTE: If dose rate is < 5 mrem/hr at 30 cm from the standard waste package, lead shielding is unacceptable. Dose rate of loaded waste package without lead shielding: mrem/hr @ 30 cm (attach calculations) Describe lead shielding: Basis for demonstrating lead is not excessive (attached calculations, e.g. Microshield analysis, or attach dose rate survey): Maximum lead shielded

  17. Fond du Lac Band Leads Climate Resilience Efforts on Lake Superior...

    Energy Savers [EERE]

    Fond du Lac Band Leads Climate Resilience Efforts on Lake Superior Chippewa Indian Reservation Fond du Lac Band Leads Climate Resilience Efforts on Lake Superior Chippewa Indian ...

  18. Gas turbine CHP leads Italy`s energy drive

    SciTech Connect (OSTI)

    Jeffs, E.

    1995-11-01

    When Italy abandoned its nuclear power program, it was the signal for the electricity market to open to industrial CHP and independent power production. This move raised energy efficiency and cut pollution, as a prelude to the privatization of the electric utility system. The Privatization of ENEL, the National Electricity Authority, is expected to happen next year, but not before a significant component of independent power generation is already in place. ENEL itself was only created in 1963 and some of the former power companies have reemerged as the leading IPP`s. Although combined cycle and IPP capacity is only 5000 MW, it is expected to increase to 15,000 MW by the year 2000. In abandoning nuclear power, Italy may have given up on an unquestionably clean thermal energy source, but an intensive drive into private power with combined cycle, repowering, and industrial CHP schemes is achieving some worthwhile improvements in energy efficiency, and a cleaner environment than what went before. 3 figs., 1 tab.

  19. Status of experiments leading to a small recirculator

    SciTech Connect (OSTI)

    Sangster, C.T.; Barnard, J.J.; Cianciolo, T.V.

    1998-01-16

    A heavy ion linear induction accelerator is considered to be the leading driver candidate for an Inertial Fusion Energy reactor. To deliver a space-charge-dominated beam at the appropriate energy (several GeV), such an accelerator would be several kilometers in length. Since total length has a strong influence on accelerator cost, we are considering the potential advantages and practical implementation of a recirculating induction accelerator. To address the critical scientific and technical challenges of a recirculating space-charge-dominated heavy ion beam, we have begun to develop the elements of a scaled ``small recirculator``. An operating recirculator must demonstrate full beam control including multi-lap operation, beam insertion/extraction, acceleration and pulse compression. At present, experiments have been conducted using a 2mA, 80keV K{sup +} beam transported through a 45{degree} bend; experiments on a 90{degree} bend with five induction modulators will begin soon. This paper briefly summarizes the recirculator specifications and operational features and reports the latest experimental data as well as the developmental status of beam diagnostics.

  20. Hydrogen diffusion in Lead Zirconate Titanate and Barium Titanate

    SciTech Connect (OSTI)

    Alvine, Kyle J.; Vijayakumar, M.; Bowden, Mark E.; Schemer-Kohrn, Alan L.; Pitman, Stan G.

    2012-08-28

    Hydrogen is a potential clean-burning, next-generation fuel for vehicle and stationary power. Unfortunately, hydrogen is also well known to have serious materials compatibility issues in metals, polymers, and ceramics. Piezoelectric actuator materials proposed for low-cost, high efficiency high-pressure hydrogen internal combustion engines (HICE) are known to degrade rapidly in hydrogen. This limits their potential use and poses challenges for HICE. Hydrogen-induced degradation of piezoelectrics is also an issue for low-pressure hydrogen passivation in ferroelectric random access memory. Currently, there is a lack of data in the literature on hydrogen species diffusion in piezoelectrics in the temperature range appropriate for the HICE as charged via a gaseous route. We present 1HNMR quantification of the local hydrogen species diffusion within lead zirconate titanate and barium titanate on samples charged by exposure to high-pressure gaseous hydrogen ?32?MPa. Results are discussed in context of theoretically predicted interstitial hydrogen lattice sites and aqueous charging experiments from existing literature.

  1. Energy Data Management Lead-by-Example Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Data Management Lead-by-Example Resources Energy Data Management Lead-by-Example Resources State and local governments can lead by example by promoting energy efficiency programs and policies for public facilities, equipment, and government operations. Find energy data management lead-by-example resources below. State and Local Solution Center: Energy Data Management and Evaluation

  2. Big River mine tailings Superfund site lead exposure study, Jefferson City, Missouri. Final report

    SciTech Connect (OSTI)

    Murgueytio, A.M.; Clardy, S.A.; Sterling, D.A.; Shadel, B.N.; Clements, B.W.

    1998-08-01

    The purpose of this study was to determine if living close to the Big River Mine Tailings Superfund site increased blood lead levels of resident children and what contribution mining waste had to any increase. The results of this study indicated that blood lead levels were a product of exposure to lead mining waste, lead-based paint, and other sources. Because the only substantial difference between the study and control areas, in terms of exposure to lead, was the presence of lead mining, mining waste is the reasonable explanation for the difference between the blood lead levels in the two communities.

  3. Lead Slowing Down Spectrometer FY2013 Annual Report

    SciTech Connect (OSTI)

    Warren, Glen A.; Kulisek, Jonathan A.; Gavron, Victor A.; Danon, Yaron; Weltz, Adam; Harris, Jason; Stewart, T.

    2013-10-29

    Executive Summary The Lead Slowing Down Spectrometry (LSDS) project, funded by the Materials Protection And Control Technology campaign, has been evaluating the feasibility of using LSDS techniques to assay fissile isotopes in used nuclear fuel assemblies. The approach has the potential to provide considerable improvement in the assay of fissile isotopic masses in fuel assemblies compared to other non-destructive techniques in a direct and independent manner. This report is a high level summary of the progress completed in FY2013. This progress included: • Fabrication of a 4He scintillator detector to detect fast neutrons in the LSDS operating environment. Testing of the detector will be conducted in FY2014. • Design of a large area 232Th fission chamber. • Analysis using the Los Alamos National Laboratory perturbation model estimated the required number of neutrons for an LSDS measurement to be 10 to the 16th source neutrons. • Application of the algorithms developed at Pacific Northwest National Laboratory to LSDS measurement data of various fissile samples conducted in 2012. The results concluded that the 235U could be measured to 2.7% and the 239Pu could be measured to 6.3%. Significant effort is yet needed to demonstrate the applicability of these algorithms for used-fuel assemblies, but the results reported here are encouraging in demonstrating that we are making progress toward that goal. • Development and cost-analysis of a research plan for the next critical demonstration measurements. The plan suggests measurements on fresh fuel sub assemblies as a means to experimentally test self-attenuation and the use of fresh mixed-oxide fuel as a means to test simultaneous measurement of 235U and 239Pu.

  4. Lead-acid battery companies join forces with Argonne National Laboratory to

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    enhance battery performance | Argonne National Laboratory Lead-acid battery companies join forces with Argonne National Laboratory to enhance battery performance September 1, 2016 Tweet EmailPrint Exploring the unrealized potential of lead batteries is the goal of a new collaboration between the U.S. Department of Energy's Argonne National Laboratory and two leading lead recycling and lead battery manufacturing companies, RSR Technologies and East Penn Manufacturing. The collaboration will

  5. Achieving dust lead clearance standards after lead hazard control projects: An evaluation of the HUD-recommended cleaning procedure and an abbreviated alternative

    SciTech Connect (OSTI)

    Dixon, S. ); Tohn, E. ); Rupp, R. ); Clark, S. . Dept. of Environmental Health)

    1999-05-01

    The US Department of Housing and Urban Development's (HUD's) Guidelines for the Evaluation and Control of Lead-Based Paint Hazards in Housing strongly recommend that after lead hazard control interventions all walls, ceiling, floors, and other horizontal surfaces be cleaned using a three-step process to reduce lead-contaminated dust and debris. The three steps are: an initial vacuuming using a machine equipped with a high-efficiency particulate air (HEPA) filter (HEPA vacuum), wet wash with a lead cleaner, and a final HEPA vacuum. This study evaluated the effectiveness of two cleaning protocols: (1) the HUD-recommended three-step procedure, and (2) an abbreviated two-step cleaning procedure that omits the final HEPA vacuum. Cleaning procedures were evaluated in 27 dwelling units that had undergone significant lead hazard control interventions likely to produce lead dust. Dust lead samples were collected on floors and in window sills and troughs prior to the lead control hazard intervention, after the wet wash step of the cleaning procedure, and after completion of the second HEPA vacuuming. The results of the study demonstrate that dust lead surface loading on smooth and cleanable surfaces following the three-step and two-step cleaning procedures can achieve 1995 federal guidance dust clearance levels and levels substantially lower. Although the dust lead clearance rates before and after the second HEPA vacuum were the same, the time saved by omitting the second HEPA is small relative to the other elements of the cleaning process.

  6. KNN–NTK composite lead-free piezoelectric ceramic

    SciTech Connect (OSTI)

    Matsuoka, T. Kozuka, H.; Kitamura, K.; Yamada, H.; Kurahashi, T.; Yamazaki, M.; Ohbayashi, K.

    2014-10-21

    A (K,Na)NbO₃-based lead-free piezoelectric ceramic was successfully densified. It exhibited an enhanced electromechanical coupling factor of kₚ=0.52, a piezoelectric constant d₃₃=252 pC/N, and a frequency constant Nₚ=3170 Hz m because of the incorporation of an elaborate secondary phase composed primarily of KTiNbO₅. The ceramic's nominal composition was 0.92K₀.₄₂Na₀.₄₄Ca₀.₀₄Li₀.₀₂Nb₀.₈₅O₃–0.047K₀.₈₅Ti₀.₈₅Nb₁.₁₅O₅–0.023BaZrO₃ –0.0017Co₃O₄–0.002Fe₂O₃–0.005ZnO, abbreviated herein as KNN–NTK composite. The KNN–NTK ceramic exhibited a dense microstructure with few microvoids which significantly degraded its piezoelectric properties. Elemental maps recorded using transmission electron microscopy with energy-dispersive X-ray spectroscopy (TEM–EDS) revealed regions of high concentrations of Co and Zn inside the NTK phase. In addition, X-ray diffraction patterns confirmed that a small portion of the NTK phase was converted into K₂(Ti,Nb,Co,Zn)₆O₁₃ or CoZnTiO₄ by a possible reaction between Co and Zn solutes and the NTK phase during a programmed sintering schedule. TEM studies also clarified a distortion around the KNN/NTK interfaces. Such an NTK phase filled voids between KNN particles, resulting in an improved chemical stability of the KNN ceramic. The manufacturing process was subsequently scaled to 100 kg per batch for granulated ceramic powder using a spray-drying technique. The properties of the KNN–NTK composite ceramic produced using the scaled-up method were confirmed to be identical to those of the ceramic prepared by conventional solid-state reaction sintering. Consequently, slight changes in the NTK phase composition and the distortion around the KNN/NTK interfaces affected the KNN–NTK composite ceramic's piezoelectric characteristics.

  7. Optimized Battery-Type Reactor Primary System Design Utilizing Lead

    SciTech Connect (OSTI)

    Yu, Yong H.; Son, Hyoung M.; Lee, Il S.; Suh, Kune Y.

    2006-07-01

    A number of small and medium size reactors are being developed worldwide as well as large electricity generation reactors for co-generation, district heating or desalination. The Seoul National University has started to develop 23 MWth BORIS (Battery Optimized Reactor Integral System) as a multi-purpose reactor. BORIS is an integral-type optimized fast reactor with an ultra long life core. BORIS is being designed to meet the Generation IV nuclear energy system goals of sustainability, safety, reliability and economics. Major features of BORIS include 20 consecutive years of operation without refueling; elimination of an intermediate heat transport loop and main coolant pump; open core without individual subassemblies; inherent negative reactivity feedback; and inherent load following capability. Its one mission is to provide incremental electricity generation to match the needs of developing nations and especially remote communities without major electrical grid connections. BORIS consists of a reactor module, heat exchanger, coolant module, guard vessel, reactor vessel auxiliary cooling system (RVACS), secondary system, containment and the seismic isolation. BORIS is designed to generate 10 MWe with the resulting thermal efficiency of 45 %. BORIS uses lead as the primary system coolant because of the inherent safety of the material. BORIS is coupled with a supercritical carbon dioxide Brayton cycle as the secondary system to gain a high cycle efficiency in the range of 45 %. The reference core consists of 757 fuel rods without assembly with an active core height of 0.8 m. The BORIS core consists of single enrichment zone composed of a Pu-MA (minor actinides)-U-N fuel and a ferritic-martensitic stainless steel clad. This study is intended to set up appropriate reactor vessel geometry by performing thermal hydraulic analysis on RVACS using computational fluid dynamics codes; to examine the liquid metal coolant behavior along the subchannels; to find out whether the

  8. Effects of Relativity Lead to"Warp Speed" Computations

    SciTech Connect (OSTI)

    Vay, J.-L.

    2007-11-01

    A scientist at Lawrence Berkeley National Laboratory has discovered that a previously unnoticed consequence of Einstein's special theory of relativity can lead to speedup of computer calculations by orders of magnitude when applied to the computer modeling of a certain class of physical systems. This new finding offers the possibility of tackling some problems in a much shorter time and with far more precision than was possible before, as well as studying some configurations in every detail for the first time. The basis of Einstein's theory is the principle of relativity, which states that the laws of physics are the same for all observers, whether the 'observer' is a turtle 'racing' with a rabbit, or a beam of particles moving at near light speed. From the invariance of the laws of physics, one may be tempted to infer that the complexity of a system is independent of the motion of the observer, and consequently, a computer simulation will require the same number of mathematical operations, independently of the reference frame that is used for the calculation. Length contraction and time dilation are well known consequences of the special theory of relativity which lead to very counterintuitive effects. An alien observing human activity through a telescope in a spaceship traveling in the Vicinity of the earth near the speed of light would see everything flattened in the direction of propagation of its spaceship (for him, the earth would have the shape of a pancake), while all motions on earth would appear extremely slow, slowed almost to a standstill. Conversely, a space scientist observing the alien through a telescope based on earth would see a flattened alien almost to a standstill in a flattened spaceship. Meanwhile, an astronaut sitting in a spaceship moving at some lower velocity than the alien spaceship with regard to earth might see both the alien spaceship and the earth flattened in the same proportion and the motion unfolding in each of them at the same

  9. TEC/WG Tribal Topic Group

    Office of Environmental Management (EM)

    April 4, 2005 - Phoenix, AZ Group Chair: Jay Jones (DOE/OCRWM) Tribal Topic Group Members Present: Nancy Bennett (UNM/ATRI), Kevin Blackwell (DOT/FRA), Kristen Ellis (DOE/CI), Ed Gonzales (ELG), Elizabeth Helvey (BSC), Jeff Hepting (Pueblo of Acoma), Robert Holden (NCAI), Judith Holm (DOE/OCRWM), Dan King (Oneida Nation), Gary Lanthrum (DOE/OCRWM), Bob Lupton (DOE/ORD/IR), Corinne Macaluso (DOE/OCRWM), Ellen Ott (DOE/GC), Jennifer Patric (BAH), Stanley Paytiamo (Pueblo of Acoma), Wilda Portner

  10. A survey of spatially distributed exterior dust lead loadings in New York City

    SciTech Connect (OSTI)

    Caravanos, Jack; Weiss, Arlene L.; Blaise, Marc J.; Jaeger, Rudolph J. . E-mail: jaegerr@envmed.com

    2006-02-15

    This work documents ambient lead dust deposition values (lead loading) for the boroughs of New York City in 2003-2004. Currently, no regulatory standards exist for exterior concentrations of lead in settled dust. This is in contrast to the clearance and risk assessment standards that exist for interior residential dust. The reported potential for neurobehavioral toxicity and adverse cognitive development in children due to lead exposure prompts public health concerns about undocumented lead sources. Such sources may include settled dust of outdoor origin. Dust sampling throughout the five boroughs of NYC was done from the top horizontal portion of pedestrian traffic control signals (PTCS) at selected street intersections along main thoroughfares. The data (n=214 samples) show that lead in dust varies within each borough with Brooklyn having the highest median concentration (730{mu}g/ft{sup 2}), followed in descending order by Staten Island (452{mu}g/ft{sup 2}), the Bronx (382{mu}g/ft{sup 2}), Queens (198{mu}g/ft{sup 2}) and finally, Manhattan (175{mu}g/ft{sup 2}). When compared to the HUD/EPA indoor lead in dust standard of 40{mu}g/ft{sup 2}, our data show that this value is exceeded in 86% of the samples taken. An effort was made to determine the source of the lead in the dust atop of the PTCS. The lead in the dust and the yellow signage paint (which contains lead) were compared using isotopic ratio analysis. Results showed that the lead-based paint chip samples from intact signage did not isotopically match the dust wipe samples taken from the same surface. We know that exterior dust containing lead contributes to interior dust lead loading. Therefore, settled leaded dust in the outdoor environment poses a risk for lead exposure to children living in urban areas, namely, areas with elevated childhood blood lead levels and background lead dust levels from a variety of unidentified sources.

  11. Energy Tricks Lead to Cost-Saving Treats | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tricks Lead to Cost-Saving Treats Energy Tricks Lead to Cost-Saving Treats October 29, ... Want to save more energy? Learn more tips and tricks to ward off energy waste as ...

  12. Scale Up of Novel, Low-Cost Carbon Fibers Leading to High-Volume...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Scale Up of Novel, Low-Cost Carbon Fibers Leading to High-Volume Commercial Launch Scale Up of Novel, Low-Cost Carbon Fibers Leading to High-Volume Commercial Launch The Dow ...

  13. DOE-Funded Research on Bacterial Enzyme Could Lead to Cheaper...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE-Funded Research on Bacterial Enzyme Could Lead to Cheaper Biofuel DOE-Funded Research on Bacterial Enzyme Could Lead to Cheaper Biofuel May 28, 2014 - 12:24pm Addthis A ...

  14. The impact of atmospheric aerosols on trace metal chemistry in open ocean surface seawater 3. Lead

    SciTech Connect (OSTI)

    Maring, H.B.; Duce, R.A. )

    1990-04-15

    Atmospheric aerosols collected at Enewetak Atoll in the tropical North Pacific were exposed to seawater in laboratory experiments to assess the impact of atmospheric aerosols on lead chemistry in surface seawater. The net atmospheric flux of soluble lead to the ocean is between 16 and 32 pmol cm{sup {minus}2}/yr at Enewetak. The stable lead isotopic composition of soluble aerosol lead indicates that it is of anthropogenic origin. Anthropogenic aerosol lead from Central and North America appears to be less soluble and/or to dissolve less rapidly than that from Asia. Dissolved organic matter and possibly lower pH appear to increase the nonaluminosilicate aerosol lead solubility and/or dissolution rate. The isotopic composition of lead in air, seawater and dry deposition suggests that after deposition in the ocean, nonaluminosilicate particulate lead can be reinjected into the atmosphere during sea salt aerosol production.

  15. George Neil Named to Lead JLab's Free-Electron Laser Program...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    George Neil Named to Lead JLab's Free-Electron Laser Program George Neil Named to Lead JLab's Free-Electron Laser Program NEWPORT NEWS, Va., Feb.15, 2008 - Dr. George Neil has been ...

  16. Property:NEPA LeadAgencyDocNumber | Open Energy Information

    Open Energy Info (EERE)

    LeadAgencyDocNumber Jump to: navigation, search Property Name NEPA LeadAgencyDocNumber Property Type String This is a property of type String. Pages using the property "NEPA...

  17. Tracing the transport of anthropogenic lead in the atmosphere and in soils using isotopic ratios

    SciTech Connect (OSTI)

    Erel, Y.; Veron, A.; Halicz, L.

    1997-11-01

    The isotopic composition of lead in aerosols and soils in Israel is used to characterize the sources of anthropogenic lead in the region, to ascertain the isotopic composition of natural, rock-derived lead in specific areas, and to determine rates of anthropogenic lead migration in soils. The isotopic composition of lead currently emitted from cars in Israel ({sup 206}Pb/{sup 207}Pb = 1.115 {+-} 2) is controlled by alkyl-lead produced in France and Germany. In addition to petrol-lead, two more sources of anthropogenic lead can be detected in sampled aerosols; the first one has low concentrations of lead ({approximately} ng/m{sup 3}) and {sup 206}Pb/{sup 207}Pb {approximately} 1.157, and is most likely lead, emitted in Turkey, that traveled across the eastern Mediterranean basin; the second type of aerosols contains a mixture of lead emitted in several countries including Turkey, Greece, and Ukraine ({sup 206}Pb/{sup 207}Pb value of 1.155-1.160; [Pb] {approximately}20-30 ng/m{sup 3}). Anthropogenic lead is more accessible for acid leaching than natural lead, therefore, it is more labile in the soil. The isotopic composition of lead in the acid-leached fraction of near-road soil profiles records the history of alkyl-lead emission in the country. Based on changes in the isotopic composition of lead with soil depth, it is estimated that anthropogenic lead migrates into the soil at approximately 0.5 cm/y. A soil profile from a relatively remote area is less contaminated by anthropogenic lead and displays a different distribution of lead isotopic values with depth. The isotopic composition of lead suggests that natural lead in soils developed on carbonate bedrock is derived from clays, either from the rock-residue (the clay fraction in the carbonate bedrock), or from airborne clay, but not from lead released from the carbonate fraction in the rock. 44 refs., 6 figs., 2 tabs.

  18. Operations and Maintenance Lead-by-Example Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Operations and Maintenance Lead-by-Example Resources Operations and Maintenance Lead-by-Example Resources State and local governments can lead by example by promoting energy efficiency programs and policies for public facilities, equipment, and government operations. Find operations and maintenance lead-by-example resources below. DOE Resource Operations and Maintenance Best Practices: A Guide to Achieving Operational Efficiency Other Resource School Operations and Maintenance: Best Practices

  19. DOE ZERH Second Leading Builder Round Table Meeting Report | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Second Leading Builder Round Table Meeting Report DOE ZERH Second Leading Builder Round Table Meeting Report On October 23rd-24th, 2014, the ZERH program held its Second Leading Production Builder Round Table Meeting in Suwanee, GA. The purpose was to provide top executives from leading builders with a forum to share business and technical lessons learned, identify a list of common challenges delivering DOE ZERHs, and identify new solutions to bring back to their individual

  20. HUD lead-based-paint abatement demonstration (FHA). Volume 1. Appendices a-h

    SciTech Connect (OSTI)

    Not Available

    1991-08-01

    The document is Volume 1 of the two-volume appendices accompanying 'The HUD Lead-Based Paint Abatement Demonstration' report. The document contains contract documents; management and work plan narrative in support of HUD 441.1-baseline plan; research design of the lead based paint abatement demonstration; field detection of lead; quality assurance plan of detection of lead; and different forms used in recording data.

  1. Characterization of leaded fuel needs and use Task 2 topical report

    SciTech Connect (OSTI)

    Not Available

    1985-02-01

    This topical report is structured around the Statement-of-Work for the DOE/EPA IAG. This includes a discussion of the users of leaded fuel, valve recession and octane, alternatives to leaded fuel and geographical distribution of leaded fuel sales.

  2. An evaluation of the effectiveness of lead paint hazard reduction when conducted by homeowners and landlords

    SciTech Connect (OSTI)

    Etre, L.A.; Reynolds, S.J.; Burmeister, L.F.; Whitten, P.S.; Gergely, R.

    1999-08-01

    This research project was conducted in collaboration with the Iowa Department of Public Health to evaluate whether property owners who follow recommended procedures for lead-based paint removal/repair can do the work safely and effectively. This study included 29 homes where a lead-based paint hazard had been identified and lead-based paint was removed or repaired (hazard reduction). Exposure evaluation included pre-project surface dust wipe sampling, air monitoring during lead-based paint removal, post-project surface dust wipe sampling, and pre- and post-project blood samples from adult study participants. The comparison of surface dust wipe samples taken before and after lead paint hazard reduction was used to evaluate the effectiveness of lead paint hazard reduction. The lead loadings on window sill surfaces in the work area were significantly lower after completion of the project, and the lead-based paint removal did not contaminate the adjoining living area. The proportion of homes with surface dust lead loading exceeding Department of Housing and Urban Development (HUD) clearance standard was 73% pre-project and 38% post-project. Personal airborne exposures during lead removal activities reinforce the need to respiratory protection and good hygiene. There was no difference in adult pre-/post-blood levels, indicating that participants die remove lead in a safe manner with respect to their own exposures. The results indicate that hazard reduction can be done effectively when recommended procedures for the removal of lead-based paint are followed.

  3. Interpretation of 3D void measurements with Tripoli4.6/JEFF3.1.1 Monte Carlo code

    SciTech Connect (OSTI)

    Blaise, P.; Colomba, A.

    2012-07-01

    The present work details the first analysis of the 3D void phase conducted during the EPICURE/UM17x17/7% mixed UOX/MOX configuration. This configuration is composed of a homogeneous central 17x17 MOX-7% assembly, surrounded by portions of 17x17 1102 assemblies with guide-tubes. The void bubble is modelled by a small waterproof 5x5 fuel pin parallelepiped box of 11 cm height, placed in the centre of the MOX assembly. This bubble, initially placed at the core mid-plane, is then moved in different axial positions to study the evolution in the core of the axial perturbation. Then, to simulate the growing of this bubble in order to understand the effects of increased void fraction along the fuel pin, 3 and 5 bubbles have been stacked axially, from the core mid-plane. The C/E comparison obtained with the Monte Carlo code Tripoli4 for both radial and axial fission rate distributions, and in particular the reproduction of the very important flux gradients at the void/water interfaces, changing as the bubble is displaced along the z-axis are very satisfactory. It demonstrates both the capability of the code and its library to reproduce this kind of situation, as the very good quality of the experimental results, confirming the UM-17x17 as an excellent experimental benchmark for 3D code validation. This work has been performed within the frame of the V and V program for the future APOLL03 deterministic code of CEA starting in 2012, and its V and V benchmarking database. (authors)

  4. A case report of lead paint poisoning during renovation of a Victorian farmhouse

    SciTech Connect (OSTI)

    Marino, P.E.; Landrigan, P.J.; Graef, J.; Nussbaum, A.; Bayan, G.; Boch, K.; Boch, S. )

    1990-10-01

    We describe a series of four cases of childhood lead poisoning and two cases of adult lead toxicity in a professional family exposed to lead dust and fume during renovation of a rural farmhouse. Initial blood lead levels in the children ranged from 2.70 to 4.20 microM/L (56 to 87 microns/dl) and all four required chelation therapy. Lead-based paint poisoning, a well recognized entity among young children in poor, urban neighborhoods, is not confined exclusively to such areas.

  5. Cost of lead-based-paint abatement in public housing. Volume 2. Appendix C-F

    SciTech Connect (OSTI)

    Not Available

    1986-07-01

    This study provides data on lead incidence and the estimated costs of abating lead hazards in public housing at several possible threshold levels of lead concentration in applied paint. The data were collected at a sample of family projects by cooperating Lead Paint Poisoning Prevention Programs using data collection forms designed for the study. National estimates are provided based on the assumption that the construction year of a dwelling or building is the only characteristic related to lead incidence. The estimates are provided for all family dwelling units, defined as those of two-bedrooms or larger; for all buildings in family projects; and for site-wide facilities in family projects.

  6. Cost of lead-based-paint abatement in public housing. Volume 1

    SciTech Connect (OSTI)

    Wallace, J.E.

    1986-07-01

    This study provides data on lead incidence and the estimated costs of abating lead hazards in public housing at several possible threshold levels of lead concentration in applied paint. The data were collected at a sample of family projects by cooperating Lead Paint Poisoning Prevention Programs using data collection forms designed for the study. National estimates are provided based on the assumption that the construction year of a dwelling or building is the only characteristic related to lead incidence. The estimates are provided for all family dwelling units, defined as those of two-bedrooms or larger; for all buildings in family projects; and for site-wide facilities in family projects.

  7. Lead induced stress corrosion cracking of Alloy 690 in high temperature water

    SciTech Connect (OSTI)

    Chung, K.K.; Lim, J.K.; Moriya, Shinichi; Watanabe, Yutaka; Shoji, Tetsuo

    1995-12-31

    Recent investigations of cracked steam generator tubes at nuclear power plants concluded that lead significantly contributed to cracking the Alloy 600 materials. In order to investigate the stress corrosion cracking (SCC) behavior of Alloy 690, slow strain rate tests (SSRT) and anodic polarization measurements were performed. The SSRTs were conducted in a lead-chloride solution (PbCl{sub 2}) and in a chloride but lead free solution (NaCl) at pH of 3 and 4.5 at 288 C. The anodic polarization measurements were carried out at 30 C using the same solutions as in SSRT. The SSRT results showed that Alloy 690 was susceptible to SCC in both solutions. In the lead chloride solution, cracking had slight dependence on lead concentration and pH. Cracking tend to increase with a higher lead concentration and a lower pH and was mainly intergranular and was to be a few tens to hundreds micrometers in length. In the chloride only solution, cracking was similar to the lead induced SCC. The results of anodic polarization measurement and electron probe micro analysis (EPMA) helped to understand lead induced SCC. Lead was a stronger active corrosive element but had a minor affect on cracking susceptibility of the alloy. While, chloride was quite different from lead effect to SCC. A possible mechanism of lead induced SCC of Alloy 690 was also discussed based on the test results.

  8. Validation of a 20-year forecast of US childhood lead poisoning: Updated prospects for 2010

    SciTech Connect (OSTI)

    Jacobs, David E. . E-mail: dejacobs@starpower.net; Nevin, Rick

    2006-11-15

    We forecast childhood lead poisoning and residential lead paint hazard prevalence for 1990-2010, based on a previously unvalidated model that combines national blood lead data with three different housing data sets. The housing data sets, which describe trends in housing demolition, rehabilitation, window replacement, and lead paint, are the American Housing Survey, the Residential Energy Consumption Survey, and the National Lead Paint Survey. Blood lead data are principally from the National Health and Nutrition Examination Survey. New data now make it possible to validate the midpoint of the forecast time period. For the year 2000, the model predicted 23.3 million pre-1960 housing units with lead paint hazards, compared to an empirical HUD estimate of 20.6 million units. Further, the model predicted 498,000 children with elevated blood lead levels (EBL) in 2000, compared to a CDC empirical estimate of 434,000. The model predictions were well within 95% confidence intervals of empirical estimates for both residential lead paint hazard and blood lead outcome measures. The model shows that window replacement explains a large part of the dramatic reduction in lead poisoning that occurred from 1990 to 2000. Here, the construction of the model is described and updated through 2010 using new data. Further declines in childhood lead poisoning are achievable, but the goal of eliminating children's blood lead levels {>=}10 {mu}g/dL by 2010 is unlikely to be achieved without additional action. A window replacement policy will yield multiple benefits of lead poisoning prevention, increased home energy efficiency, decreased power plant emissions, improved housing affordability, and other previously unrecognized benefits. Finally, combining housing and health data could be applied to forecasting other housing-related diseases and injuries.

  9. Lead-based paint and lead-containing materials: The impact of recent EPA and OSHA regulations on maintenance and construction

    SciTech Connect (OSTI)

    Staker, R.D.; Scheffius, F.R.

    1998-07-01

    Over the past several years a number of new federal environmental, health, and safety regulations have been established which address various types of lead containing materials such as lead used in solder and lead-based paint. The regulations pertain to the use, removal, disposal, and handling of lead-containing materials during maintenance activities, renovation activities, and new construction. This paper will present a review of these new regulations, the impact on and applicability to maintenance and construction activities, and the risks to human health and environment. Examples will be used to illustrate the concepts discussed. This paper should be of particular interest to electric power senior managers, plant managers, environmental managers, and environmental staff.

  10. One Thing Leads to Another: How NETL Research Saves Lives | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy One Thing Leads to Another: How NETL Research Saves Lives One Thing Leads to Another: How NETL Research Saves Lives August 8, 2013 - 10:57am Addthis One Thing Leads to Another: How NETL Research Saves Lives Learn More The coronary stent was developed as part of NETL's Technology Transfer program. NETL's technology portfolio contains a broad range of innovations that have resulted from research in areas such as carbon capture and sequestration, mercury capture, fuel cells, sensors and

  11. Tom D'Agostino to Lead NNSA's Defense Programs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tom D'Agostino to Lead NNSA's Defense Programs Tom D'Agostino to Lead NNSA's Defense Programs March 1, 2006 - 12:26pm Addthis WASHINGTON , DC - Secretary of Energy Samuel W. Bodman today announced that Thomas P. D'Agostino has been sworn in as Deputy Administrator for Defense Programs in the Department of Energy's (DOE) National Nuclear Security Administration (NNSA). Deputy Administrator D'Agostino will lead NNSA's weapons programs, which maintain the reliability of our nation's nuclear weapons

  12. Research Led by Sandia Reveals Leading-Edge Erosion Significantly Reduces

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Wind Turbine Performance | Department of Energy Research Led by Sandia Reveals Leading-Edge Erosion Significantly Reduces Wind Turbine Performance Research Led by Sandia Reveals Leading-Edge Erosion Significantly Reduces Wind Turbine Performance January 6, 2014 - 10:00am Addthis This is an excerpt from the Fourth Quarter 2013 edition of the Wind Program R&D Newsletter. Research conducted by the U.S. Department of Energy's Sandia National Laboratories revealed that leading-edge erosion on

  13. Data, Feedback, and Awareness Lead to Big Energy Savings | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Data, Feedback, and Awareness Lead to Big Energy Savings Data, Feedback, and Awareness Lead to Big Energy Savings Data, Feedback, and Awareness Lead to Big Energy Savings Fact sheet describes how the Navy Region Southwest Metro San Diego Area (NRSMSD) regional energy management team achieved significant energy savings at the Naval Base Coronado, Naval Base San Diego, and Naval Base Point Loma. The NRSMSD organized an energy awareness program centered on energy data gathering and

  14. Local Solar: Commonalities between Communities that Lead their State in Installed PV

    SciTech Connect (OSTI)

    Day, Megan; Doris, Elizabeth

    2015-12-14

    This poster presents the results of an analysis that identifies commonalities between communities that lead their U.S. states in solar capacity.

  15. John. F. O'Leary Appointed to Lead Federal Energy Administration...

    National Nuclear Security Administration (NNSA)

    John. F. O'Leary Appointed to Lead Federal Energy Administration | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the...

  16. Spotlight on Rutland County, Vermont: How Local Ties Lead to Local Wins

    Broader source: Energy.gov [DOE]

    Spotlight on Rutland County, Vermont: How Local Ties Lead to Local Wins, as posted on the U.S. Department of Energy's Better Buildings Neighborhood Program website.

  17. Fact Sheet: Carbon-Enhanced Lead-Acid Batteries (October 2012) | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Carbon-Enhanced Lead-Acid Batteries (October 2012) Fact Sheet: Carbon-Enhanced Lead-Acid Batteries (October 2012) DOE's Energy Storage Program is funding research and testing to improve the performance and reduce the cost of lead-acid batteries. Research to understand and quantify the mechanisms responsible for the beneficial effect of carbon additions will help demonstrate the near-term feasibility of grid-scale energy storage with lead-acid batteries, and may also benefit other

  18. Fact Sheet: Carbon-Enhanced Lead-Acid Batteries (October 2012...

    Office of Environmental Management (EM)

    In 1997, researchers made two important advancements to lead-acid batteries. First, the Japan Storage Battery Company showed that adding carbon to the battery dramatically reduces ...

  19. Lead-induced stress corrosion cracking of Alloy 600 and 690 in high temperature water

    SciTech Connect (OSTI)

    Sakai, T.; Senjuh, T.; Aoki, K.; Shigemitsu, T.; Kishi, Y.

    1992-12-31

    Lead is one of the potential contributing impurities to the degradation of PWR steam generator tubing. Recent laboratory testing has shown that lead is a corrosive material for Alloy 600 steam generator tubing. However, it is still unknown how lead influences the corrosion of steam generator tubing, including the effect of lead concentration, solution pH, stress level and material characteristics. In this study, two kinds of experiments were performed. One was to investigate the thin film characteristic and selectively dissolved base metal elements of Alloy 600MA in high temperature solutions of different lead concentrations and pH. The other investigated the dependency of degradation of Alloy 600MA and Alloy 690TT on lead concentration and stress level in mild acidic environment, at 340{degrees}C for 2500 hrs. It was firstly demonstrated that lead-enhanced selective dissolution of nickel from alloy base metal, as a result of electrochemical reaction between lead and nickel, might cause the initiation and propagation of corrosion. Secondly, we showed that Alloy 690TT, generally very corrosion resistant material, also suffered from Pb-induced corrosion. The difference of the lead-induced stress corrosion morphology of Alloy 600MA and Alloy 690TT was also clarified.

  20. Energy Wrap-Up: Charging Students To Take the Lead in Energy Innovation

    Broader source: Energy.gov [DOE]

    Students, academics and entrepreneurs came together at Stanford University to discuss how the next generation can lead the way in creating the next big breakthroughs in sustainable energy.

  1. Algal Biology Toolbox Workshop Brings Lead Experts to Inform Algae-Based

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Biofuel Strategy | Department of Energy Algal Biology Toolbox Workshop Brings Lead Experts to Inform Algae-Based Biofuel Strategy Algal Biology Toolbox Workshop Brings Lead Experts to Inform Algae-Based Biofuel Strategy May 23, 2016 - 11:15am Addthis Algal Biology Toolbox Workshop Brings Lead Experts to Inform Algae-Based Biofuel Strategy The U.S. Department of Energy's (DOE's) Bioenergy Technologies Office (BETO) is hosting a two-day workshop gathering lead experts in the field of algal

  2. Reexamination of Lead(II) Coordination Preferences in Sulfur-Rich Sites:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Implications for a Critical Mechanism of Lead Poisoning Reexamination of Lead(II) Coordination Preferences in Sulfur-Rich Sites: Implications for a Critical Mechanism of Lead Poisoning T.-C. Weng, & J.E. Penner-Hahn, University of Michigan J.S. Magyar & H.A. Godwin, Northwestern University Lead poisoning can damage the brain and nervous system and is particularly dangerous for young children who are still developing. It is estimated that ~2.2% of all U.S. children aged 1-5 years

  3. Multiple lead seal assembly for a liquid-metal-cooled fast-breeder nuclear reactor

    DOE Patents [OSTI]

    Hutter, Ernest; Pardini, John A.

    1977-03-15

    A reusable multiple lead seal assembly provides leak-free passage of stainless-steel-clad instrument leads through the cover on the primary tank of a liquid-metal-cooled fast-breeder nuclear reactor. The seal isolates radioactive argon cover gas and sodium vapor within the primary tank from the exterior atmosphere and permits reuse of the assembly and the stainless-steel-clad instrument leads. Leads are placed in flutes in a seal body, and a seal shell is then placed around the seal body. Circumferential channels in the body and inner surface of the shell are contiguous and together form a conduit which intersects each of the flutes, placing them in communication with a port through the wall of the seal shell. Liquid silicone rubber sealant is injected into the flutes through the port and conduit; the sealant fills the space in the flutes not occupied by the leads themselves and dries to a rubbery hardness. A nut, threaded onto a portion of the seal body not covered by the seal shell, jacks the body out of the shell and shears the sealant without damage to the body, shell, or leads. The leads may then be removed from the body. The sheared sealant is cleaned from the body, leads, and shell and the assembly may then be reused with the same or different leads.

  4. What Caused the Lead burn-out in Spectrometer Magnet 2B

    SciTech Connect (OSTI)

    Green, Michael A

    2010-11-29

    The spectrometer solenoids are supposed to be the first magnets installed in the MICE Cooling Channel. The results of the test of Spectrometer Magnet 2B are reported in a previous MICE Note. Magnet 2B was tested with all five coils connected in series. The magnet failed because a lead to coil M2 failed before it could be trained to its full design current of 275 A. First, this report describes the condition of the magnet when the lead failure occurred. The lead that failed was between the cold mass feed-through and the heavy lead that connected to coil M2 and the quench protection diodes. It is believed that the lead failed because the minimum propagation zone (MPZ) length was too short. The quench was probably triggered by lead motion in the field external to the magnet center coil. The effect of heat transfer on quench propagation and MPZ length is discussed. The MPZ length is compared for a number of cases that apply to the spectrometer solenoid 2B as built and as it has been repaired. The required heat transfer coefficient for cryogenic stability and the quench propagation velocity along the leads are compared for various parts of the Magnet leads inside the cold mass cryostat. The effect of the insulation on leads on heat transfer is and stability is discussed.

  5. U.S. Energy Secretary Chu to Lead Delegation to IAEA 54th Annual...

    Office of Environmental Management (EM)

    MEDIA ADVISORY: Secretary Chu to Lead Delegation to IAEA General Conference in Vienna, CSLF Ministerial in Beijing Secretary Bodman Addresses IAEA General Conference in Vienna ...

  6. Thermal spray vitrification process for the removal of lead oxide contained in organic paints

    SciTech Connect (OSTI)

    Karthikeyan, J.; Chen, J.; Bancke, G.A.; Herman, H.; Berndt, C.C.; Breslin, V.T.

    1995-12-31

    The US Environmental Protection Agency (US-EPA) regulations have necessitated the removal and containment of toxic lead from lead oxide containing paints. The Thermal Spray Vitrification Process (TSVP) is a novel technique in which a glass powder of appropriate composition is flame sprayed onto the painted surface to achieve removal and vitrification of the lead. Two different glass systems, i.e., alkali silicate and ferrous silicate, were chosen for detailed study. Appropriate amounts of raw materials were mixed, fused, quenched, ground and sieved to obtain the spray quality powders. Grit blasted mild steel coupons were used as test substrates for the spray parameter optimization studies; while those coupons with lead oxide containing organic paint were used for the lead removal experiments. The powders and deposits were investigated using Microtrac particle size analysis (for powders), optical microscopy, XRD and SEM. The remnant lead in the panel was measured using a specially prepared X-Ray Fluorescence (XRF) system. The lead leach rate was recorded as per US-EPA approved Toxicity Characteristic Leaching Procedure (TCLP). The results of this study have shown that lead oxide can be successfully removed form the paint by flame spraying a maximum of three layers of glass onto the painted surface. It is possible to obtain much higher lead removal rate with ferrous silicate glass as compared to alkali silicate glass is much higher than the ferrous silicate glass. The in situ vitrification has not been completely optimized; however, the lead containing glass coating can be remelted in situ or on site to enhance the vitrification of the lead which had been absorbed in the glass coating.

  7. Sex-based differences in gene expression in hippocampus following postnatal lead exposure

    SciTech Connect (OSTI)

    Schneider, J.S. Anderson, D.W.; Sonnenahalli, H.; Vadigepalli, R.

    2011-10-15

    The influence of sex as an effect modifier of childhood lead poisoning has received little systematic attention. Considering the paucity of information available concerning the interactive effects of lead and sex on the brain, the current study examined the interactive effects of lead and sex on gene expression patterns in the hippocampus, a structure involved in learning and memory. Male or female rats were fed either 1500 ppm lead-containing chow or control chow for 30 days beginning at weaning.Blood lead levels were 26.7 {+-} 2.1 {mu}g/dl and 27.1 {+-} 1.7 {mu}g/dl for females and males, respectively. The expression of 175 unique genes was differentially regulated between control male and female rats. A total of 167 unique genes were differentially expressed in response to lead in either males or females. Lead exposure had a significant effect without a significant difference between male and female responses in 77 of these genes. In another set of 71 genes, there were significant differences in male vs. female response. A third set of 30 genes was differentially expressed in opposite directions in males vs. females, with the majority of genes expressed at a lower level in females than in males. Highly differentially expressed genes in males and females following lead exposure were associated with diverse biological pathways and functions. These results show that a brief exposure to lead produced significant changes in expression of a variety of genes in the hippocampus and that the response of the brain to a given lead exposure may vary depending on sex. - Highlights: > Postnatal lead exposure has a significant effect on hippocampal gene expression patterns. > At least one set of genes was affected in opposite directions in males and females. > Differentially expressed genes were associated with diverse biological pathways.

  8. BNL Building 650 lead decontamination and treatment feasibility study. Final report

    SciTech Connect (OSTI)

    Kalb, P.D.; Cowgill, M.G.; Milian, L.W.

    1995-10-01

    Lead has been used extensively at Brookhaven National Laboratory (BNL) for radiation shielding in numerous reactor, accelerator and other research programs. A large inventory of excess lead (estimated at 410,000 kg) in many shapes and sizes is currently being stored. Due to it`s toxicity, lead and soluble lead compounds are considered hazardous waste by the Environmental Protection Agency. Through use at BNL, some of the lead has become radioactive, either by contamination of the surface or through activation by neutrons or deuterons. This study was conducted at BNL`s Environmental and Waste Technology Center for the BNL Safety and Environmental Protection Division to evaluate feasibility of various treatment options for excess lead currently being stored. The objectives of this effort included investigating potential treatment methods by conducting a review of the literature, developing a means of screening lead waste to determine the radioactive characteristics, examining the feasibility of chemical and physical decontamination technologies, and demonstrating BNL polyethylene macro-encapsulation as a means of treating hazardous or mixed waste lead for disposal. A review and evaluation of the literature indicated that a number of physical and chemical methods are available for decontamination of lead. Many of these techniques have been applied for this purpose with varying degrees of success. Methods that apply mechanical techniques are more appropriate for lead bricks and sheet which contain large smooth surfaces amenable to physical abrasion. Lead wool, turnings, and small irregularly shaped pieces would be treated more effectively by chemical decontamination techniques. Either dry abrasion or wet chemical methods result in production of a secondary mixed waste stream that requires treatment prior to disposal.

  9. Logistics for the implementation of lead-free solders on electronic assemblies

    SciTech Connect (OSTI)

    Vianco, P.T.; Artaki, I.

    1993-12-31

    The prospects of legislative and regulatory action aimed at taxing, restricting or banning lead-bearing materials from manufactured products has prompted the electronics community to examine the implementation of lead-free solders to replace currently used lead-containing alloys in the manufacture of electronic devices and assemblies. The logistics for changing the well established ``tin-lead solder technology`` require not only the selection of new compositions but also the qualification of different surface finishes and manufacturing processes. The meniscometer/wetting balance technique was used to evaluate the wettability of several candidate lead-free solders as well as to establish windows on processing parameters so as to facilitate prototype manufacturing. Electroplated and electroless 100Sn coatings, as well as organic preservatives, were also examined as potential alternative finishes for device leads and terminations as well as circuit board conductor surfaces to replace traditional tin-lead layers. Sandia National Laboratories and AT&T have implemented a program to qualify the manufacturing feasibility of surface mount prototype circuit boards using several commercial lead-free solders by infrared reflow technology.

  10. Investigation of lead as a cause of stress corrosion cracking at support plate intersections

    SciTech Connect (OSTI)

    Miglin, B.P.; Sarver, J.M. . Research Center)

    1991-06-01

    A laboratory program was conducted to study the extent of lead- assisted corrosion of nuclear steam generator tubing. C-rings were made from six conditions of Alloy 600 and one condition of Alloy 690 tubing. The C-rings were loaded beyond yield. The specimens were placed either in the liquid or vapor of 12 lead-containing environments and a nonleaded control. Most of the test specimens were exposed to two, 2000-hour periods at 324{degree}C (615{degree}F). The specimens were all visually and partly destructively examined. The environmental severities were ranked by the number of specimens that initiated cracks and also on depth of attack observed on a heat of Alloy 600. The corrosion severities were correlated with computer-code-calculated 324{degree}C chemistries. Also the corrosion was correlated with a 324{degree}C Pourbaix diagram. Speculation regarding reaction paths included both a soluble lead reaction and a metallic lead reaction. The soluble lead reaction is more supportable by the results. The speculated metallic lead reaction is less likely. However, a metallic lead mechanism may explain the observed enhanced attack in the vapor phase. Several recommendations were made. The major recommendation was to perform a heated crevice test to verify that soluble lead can concentrate in a crevice and result in corrosive damage to nuclear steam generator tubing. 24 refs., 3 figs.

  11. The remediation of lead contaminated soils using solvent extraction chelation techniques. Final report

    SciTech Connect (OSTI)

    Price, M.; Hanson, A.T.; Rudd, B.; Pickins, D.; Krause, K.

    1998-08-01

    This report describes preliminary work leading to the development of an innovative technology for treating a mixed waste problem at Los Alamos National Laboratory (LANL). The specific problem being addressed by this research is the result of research activity at the Meson Physics Facility (LAMPH). The LAMPH facility conducts high energy neutron research. Lead BB`s were placed in containers and used as shielding during experiments.This lead was stored in piles on the ground when it was not in use, and it sometimes sat for extended periods of time, perhaps as long as 20 years. The lead was mobilized overtime, and contaminated the underlying soil. Because of the neutron bombardment, a portion of the lead {sup 207}Pb became radioactive {sup 210}Pb, and the lead became both a listed waste and radioactive, which classified it as a mixed waste. The contaminated soil has been removed from the site and placed in drums for storage until a suitable treatment technology can be identified. The contents of the barrels consists of a mixture of lead contaminated soil and lead BB`s.

  12. In situ vitrification and removal of lead-based paint for steel structures

    SciTech Connect (OSTI)

    Covey, S.; Lattimore, L.; Kumar, A.

    1995-12-31

    The feasibility of in-situ vitrification of lead oxide contained in red lead based organic coatings was investigated. The removal of organic lead-based primers and paints has been achieved by a flame spray process that uses a glass/ceramic compound designed for high lead solubility and resistance to devitrification. The glass/ceramic compounds were prepared by fusing, fritting, and ball milling to produce the desired powder. The result powder was collected and used to flame spray previously prepared samples containing a commonly used red lead primer. Oxyacetylene flame spray technology was used to apply the glass compound to the steel substrate. The resulting glass waste was collected and analyzed for lead content using Energy Dispersive Spectroscopy (EDS) and X-Ray Diffraction analysis. The lead cation leachability rates were determined by the US Environmental Protection Agency (EPA) approved Toxicity Characteristic Leaching Procedure (TCLP). The designer glass waste form that exhibited the best results was a borosilicate glass with iron oxide additions. The iron silicate glass waste form leached approximately 1 ppm of lead during the TCLP, far below the current 5 ppm limit for hazardous waste.

  13. WPN 09-6: Lead Safe Weatherization (LSW) Additional Materials and Information

    Broader source: Energy.gov [DOE]

    To provide clarification and additional information to grantees as they implement WPN 08-6, Interim Lead-Safe Weatherization Guidance. This guidance augments, but does not replace, WPN 08-6 and builds on the foundation provided in WPN 02-6, Weatherization Activities and Federal Lead Based Paint Regulations.

  14. ASTM sampling methods and analytical validation for lead in paint, dust, soil, and air

    SciTech Connect (OSTI)

    Ashley, K.; Schlecht, P.C.; Song, R.; Feng, A.; DeWalt, G.; McKnight, M.E.

    1996-12-31

    ASTM Subcommittee E06.23 on Abatement/Mitigation of Lead Hazards has developed a number of standards that are concerned with the sampling of leas in environmental media, namely paint, dust, soil and airborne particulate. An ASTM practice for the collection of airborne particulate lead in the workplace has been published. New ASTM standards for the collection of dry paint film samples, surface soil samples, and surface dust wipe samples for subsequent lead analysis have also been promulgated. Other draft standards pertinent to lead sampling are under development. The ASTM standards concerned with lead sample collection are accompanied by separate sample preparation standard practices and a standard analysis method. Sample preparation and analytical methods have been evaluated by interlaboratory testing; such analyses may be used to assess the efficacy of sampling protocols.

  15. Serum immunoglobulin, complement C3, and salivary IgA levels in lead workers

    SciTech Connect (OSTI)

    Ewers, U.; Stiller-Winkler, R.; Idel, H.

    1982-12-01

    Sera of 72 lead workers and of 53 reference subjects were examined for levels of immunoglobulins IgM, IgG, and IgA, and complement C3 by radial immunodiffusion. Salivary IgA levels were determined in 33 lead workers and 40 reference subjects. On the average the lead workers had lower serum complement C3 and immunoglobulin levels, as well as lower salivary IgA levels, than the reference subjects. A significant negative correlation was found between blood lead concentrations (PbB) and the serum levels of complement C3 and IgG in the group of lead workers, as well as in the total population examined. However, a significant positive correlation was observed between PbB and serum IgA in the group of lead workers. The results obtained in this study are discussed in relation to numerous reports in the literature showing that lead exerts adverse effects on the immune system in animals.

  16. Kohl: A lead-hazardous eye makeup from the third world to the first world

    SciTech Connect (OSTI)

    Parry, C.; Eaton, J. )

    1991-08-01

    Kohl is a widely used traditional cosmetic. It is mainly worn around the eyes in Asia, Africa, and the Middle East. It may be a pervasive source of lead poisoning in those areas and among individuals from those areas who have immigrated to developed nations. Samples of kohl were purchased in Morocco, Mauritania, Great Britain, and the United States. Some of these samples originated from Pakistan, India, and Saudi Arabia. Kohl is widely believed to consist of antimony, but analysis consistently revealed only trace amounts of antimony. Nine of the twenty-two samples tested contained less than 0.6% lead; however, seven samples had lead levels in excess of 50%. The remainder ranged from 3.31 to 37.3%. Third-world-manufactured kohls were purchased in the United States and Britain, suggesting that this hazard is no longer confined to the third world. Those kohls that contained lead were sold in violation of laws on lead in cosmetics in both of these nations. Third-world physicians and health care workers appear to be unaware of possible lead uptake from unsuspected traditionally used items. Physicians in developed nations with patients from Asia, the Middle East, and North Africa need to factor in the possibility of past or present lead intake from unorthodox sources such as kohl.

  17. RHIC 12x150A current lead temperature controller: design and implementation

    SciTech Connect (OSTI)

    Mi, C.; Seberg, S.; Ganetis, Hamdi, K.; Louie, W.; Heppner, G.; Jamilkowski, J.; Bruno, D.; DiLieto, A.; Sirio, C.; Tuozzolo, J.; Sandberg, J.; Unger, K.

    2011-03-28

    There are 60 12 x 150A current leads distributed in six RHIC service buildings; each lead delivers power supply current from room temperature to cryogenic temperature in RHIC. Due to the humid environment, condensation occurs frequently and ice forms quickly during operation, especially during an extensive storage period. These conditions generate warnings and alarms to which personnel must respond and establish temporary solutions to keep the machine operating. In here, we designed a temperature control system to avoid such situations. This paper discusses its design, implementation, and some results. There are six service buildings in the RHIC complex; each building has two valve boxes that transfer room-temperature current cables from the power supplies into superconducting leads, and then transport them into the RHIC tunnel. In there, the transition between the room-temperature lead into superconducting lead is critical and essential; smooth running during the physics store is crucial for the machine's continuing operation. One of the problems that often occurred previously was the icing of these current leads that could result in a potential leakage current onto ground, thereby preventing a continuous supply of physics store. Fig. 1 illustrates a typical example on a power lead. Among the modifications of the design of the valve box, we list below the new requirements for designing the temperature controller to prevent icing occurring: (1) Remotely control, monitor, and record each current lead's temperature in real time. Prevent icing or overheating of a power lead. (2) Include a temperature alarm for the high/low level threshold. In this paper we discuss the design, implementation, upgrades to, and operation of this new system.

  18. Assessment of lead contamination in Bahrain environment. I. Analysis of household paint

    SciTech Connect (OSTI)

    Madany, I.M.; Ali, S.M.; Akhter, M.S.

    1987-01-01

    The analysis of lead in household paint collected from various old buildings in Bahrain is reported. The atomic absorption spectrophotometric method, both flame and flameless (graphite furnace) techniques, were used for the analysis. The concentrations of lead in paint were found in the range 200 to 5700 mg/kg, which are low compared to the limit of 0.5% in UK and 0.06% in USA. Nevertheless, these are hazardous. Recommendations are reported in order to avoid paint containing lead. 17 references, 1 table.

  19. Corrosion and degradation of a polyurethane/Co-Ni-Cr-Mo pacemaker lead

    SciTech Connect (OSTI)

    Sung, P.; Fraker, A.C.

    1987-12-01

    An investigation to study changes in the metal surfaces and the polyurethane insulation of heart pacemaker leads under controlled in vitro conditions was conducted. A polyurethane (Pellethane 2363-80A)/Co-Ni-Cr-Mo (MP35N) wire lead was exposed in Hanks' physiological saline solution for 14 months and then analyzed using scanning electron microscopy, x-ray energy dispersive analysis, and small angle x-ray scattering. Results showed that some leakage of solution into the lead had occurred and changes were present on both the metal and the polyurethane surfaces.

  20. Progress in Recycling Elemental Lead for Reuse of Radiologically-Contaminated within the Nuclear Industry

    SciTech Connect (OSTI)

    Reno, C.

    2003-02-26

    Duratek successfully demonstrated a process for reusing contaminated lead as a shielding material for radioactive waste containers. This process offers the Department of Energy (DOE) and commercial utilities a cost-effective strategy for reusing a material that would otherwise require costly disposal as a mixed waste. During the past year, GTS-Duratek Inc. approximately 500,000 pounds of contaminated and potentially contaminated lead into shielding (bricks) and shielded steel containers. The lead originated from the DOE facilities including INEEL, Hanford, Argonne, Los Alamos, Berkeley and Sandia.