National Library of Energy BETA

Sample records for lead acid nickel-metal

  1. Steps to Commercialization: Nickel Metal Hydride Batteries | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Steps to Commercialization: Nickel Metal Hydride Batteries Steps to Commercialization: Nickel Metal Hydride Batteries October 17, 2011 - 10:42am Addthis Steps to Commercialization: Nickel Metal Hydride Batteries Matthew Loveless Matthew Loveless Data Integration Specialist, Office of Public Affairs How does it work? Through licensing and collaborative work, Energy Department-sponsored research can yield great economic benefits and help bring important new products to market. The

  2. Feasibility study for the recycling of nickel metal hydride electric vehicle batteries. Final report

    SciTech Connect (OSTI)

    Sabatini, J.C.; Field, E.L.; Wu, I.C.; Cox, M.R.; Barnett, B.M.; Coleman, J.T.

    1994-01-01

    This feasibility study examined three possible recycling processes for two compositions (AB{sub 2} and AB{sub 5}) of nickel metal hydride electric vehicle batteries to determine possible rotes for recovering battery materials. Analysts examined the processes, estimated the costs for capital equipment and operation, and estimated the value of the reclaimed material. They examined the following three processes: (1) a chemical process that leached battery powders using hydrochloric acid, (2) a pyrometallurical process, and (3) a physical separation/chemical process. The economic analysis revealed that the physical separation/chemical process generated the most revenue.

  3. Sandia National Laboratories: Due Diligence on Lead Acid Battery...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Due Diligence on Lead Acid Battery Recycling March 23, 2011 Lead Acid Batteries on secondary containment pallet Lead Acid Batteries on secondary containment pallet In 2004, the US...

  4. Primer on lead-acid storage batteries

    SciTech Connect (OSTI)

    1995-09-01

    This handbook was developed to help DOE facility contractors prevent accidents caused during operation and maintenance of lead-acid storage batteries. Major types of lead-acid storage batteries are discussed as well as their operation, application, selection, maintenance, and disposal (storage, transportation, as well). Safety hazards and precautions are discussed in the section on battery maintenance. References to industry standards are included for selection, maintenance, and disposal.

  5. Lightweight, durable lead-acid batteries

    SciTech Connect (OSTI)

    Lara-Curzio, Edgar; An, Ke; Kiggans, Jr., James O.; Dudney, Nancy J.; Contescu, Cristian I.; Baker, Frederick S.; Armstrong, Beth L.

    2011-09-13

    A lightweight, durable lead-acid battery is disclosed. Alternative electrode materials and configurations are used to reduce weight, to increase material utilization and to extend service life. The electrode can include a current collector having a buffer layer in contact with the current collector and an electrochemically active material in contact with the buffer layer. In one form, the buffer layer includes a carbide, and the current collector includes carbon fibers having the buffer layer. The buffer layer can include a carbide and/or a noble metal selected from of gold, silver, tantalum, platinum, palladium and rhodium. When the electrode is to be used in a lead-acid battery, the electrochemically active material is selected from metallic lead (for a negative electrode) or lead peroxide (for a positive electrode).

  6. Lightweight, durable lead-acid batteries

    DOE Patents [OSTI]

    Lara-Curzio, Edgar; An, Ke; Kiggans, Jr., James O; Dudney, Nancy J; Contescu, Cristian I; Baker, Frederick S; Armstrong, Beth L

    2013-05-21

    A lightweight, durable lead-acid battery is disclosed. Alternative electrode materials and configurations are used to reduce weight, to increase material utilization and to extend service life. The electrode can include a current collector having a buffer layer in contact with the current collector and an electrochemically active material in contact with the buffer layer. In one form, the buffer layer includes a carbide, and the current collector includes carbon fibers having the buffer layer. The buffer layer can include a carbide and/or a noble metal selected from of gold, silver, tantalum, platinum, palladium and rhodium. When the electrode is to be used in a lead-acid battery, the electrochemically active material is selected from metallic lead (for a negative electrode) or lead peroxide (for a positive electrode).

  7. Advanced Lead Acid Battery Consortium | Open Energy Information

    Open Energy Info (EERE)

    Lead Acid Battery Consortium Jump to: navigation, search Name: Advanced Lead-Acid Battery Consortium Place: Durham, North Carolina Zip: 27713 Sector: Vehicles Product: The ALABC is...

  8. Nickel-metal hydride battery development. Final technical report

    SciTech Connect (OSTI)

    1995-06-01

    Rechargeable batteries are used as the power source for a broad range of portable equipment. Key battery selection criteria typically are weight, volume, first cost, life cycle cost, and environmental impact. Rechargeable batteries are favored from a life cycle cost and environmental impact standpoint over primary batteries. The nickel-metal hydride (Ni-MH) battery system has emerged as the battery of choice for many applications based on its superior characteristics when judged on the above criteria against other battery types. In most cases commercial Ni-MH batteries are constructed with coiled electrodes in cylindrical metal containers. Electro Energy, Inc. (EEI) has been developing a novel flat bipolar configuration of the Ni-MH system that offers weight, volume, and cost advantages when compared to cylindrical cells. The unique bipolar approach consists of fabricating individual flat wafer cells in conductive, carbon-filled, plastic face plates. The individual cells contain a nonconductive plastic border which is heat sealed around the perimeter to make a totally sealed unit cell. Multi-cell batteries are fabricated by stacking the individual wafer cells in such a way that the positive face of one cell contacts the negative face of the adjacent cell. The stack is then contained in an outer housing with end contacts. The purpose of this program was to develop, evaluate, and demonstrate the capabilities of the EEI Ni-MH battery system for consumer applications. The work was directed at the development and evaluation of the compact bipolar construction for its potential advantages of high power and energy density. Experimental investigations were performed on various nickel electrode types, hydride electrode formulations, and alternate separator materials. Studies were also directed at evaluating various oxygen recombination techniques for low pressure operation during charge and overcharge.

  9. Mathematical modeling of the nickel/metal hydride battery system

    SciTech Connect (OSTI)

    Paxton, B K

    1995-09-01

    A group of compounds referred to as metal hydrides, when used as electrode materials, is a less toxic alternative to the cadmium hydroxide electrode found in nickel/cadmium secondary battery systems. For this and other reasons, the nickel/metal hydride battery system is becoming a popular rechargeable battery for electric vehicle and consumer electronics applications. A model of this battery system is presented. Specifically the metal hydride material, LaNi{sub 5}H{sub 6}, is chosen for investigation due to the wealth of information available in the literature on this compound. The model results are compared to experiments found in the literature. Fundamental analyses as well as engineering optimizations are performed from the results of the battery model. In order to examine diffusion limitations in the nickel oxide electrode, a ``pseudo 2-D model`` is developed. This model allows for the theoretical examination of the effects of a diffusion coefficient that is a function of the state of charge of the active material. It is found using present data from the literature that diffusion in the solid phase is usually not an important limitation in the nickel oxide electrode. This finding is contrary to the conclusions reached by other authors. Although diffusion in the nickel oxide active material is treated rigorously with the pseudo 2-D model, a general methodology is presented for determining the best constant diffusion coefficient to use in a standard one-dimensional battery model. The diffusion coefficients determined by this method are shown to be able to partially capture the behavior that results from a diffusion coefficient that varies with the state of charge of the active material.

  10. Closure device for lead-acid batteries

    DOE Patents [OSTI]

    Ledjeff, Konstantin

    1983-01-01

    A closure device for lead-acid batteries includes a filter of granulated activated carbon treated to be hydrophobic combined with means for preventing explosion of emitted hydrogen and oxygen gas. The explosion prevention means includes a vertical open-end tube within the closure housing for maintaining a liquid level above side wall openings in an adjacent closed end tube. Gases vent from the battery through a nozzle directed inside the closed end tube against an impingement surface to remove acid droplets. The gases then flow through the side wall openings and the liquid level to quench any possible ignition prior to entering the activated carbon filter. A wick in the activated carbon filter conducts condensed liquid back to the closure housing to replenish the liquid level limited by the open-end tube.

  11. Sandia National Laboratories: Due Diligence on Lead Acid Battery Recycling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Due Diligence on Lead Acid Battery Recycling March 23, 2011 Lead Acid Batteries on secondary containment pallet Lead Acid Batteries on secondary containment pallet In 2004, the US Geological Survey estimated that 95% of lead in the United States is recycled, primarily from used lead acid batteries. A broader 2009 European study estimated that globally about 52% of lead is recycled, and a 2008 Asian study estimated a global recycle rate of 68%. Unfortunately, many incidents over the past decade

  12. DOE specification: Flooded-type lead-acid storage batteries

    SciTech Connect (OSTI)

    1996-08-01

    This document contains a ``fill-in-the-blanks`` guide specification for procurement of flooded-type lead-acid storage batteries, for uninterruptible power supply applications.

  13. Hydridable material for the negative electrode in a nickel-metal hydride storage battery

    DOE Patents [OSTI]

    Knosp, Bernard; Bouet, Jacques; Jordy, Christian; Mimoun, Michel; Gicquel, Daniel

    1997-01-01

    A monophase hydridable material for the negative electrode of a nickel-metal hydride storage battery with a "Lave's phase" structure of hexagonal C14 type (MgZn.sub.2) has the general formula: Zr.sub.1-x Ti.sub.x Ni.sub.a Mn.sub.b Al.sub.c Co.sub.d V.sub.e where ##EQU1##

  14. Anaerobic microbial dissolution of lead and production of organic acids

    DOE Patents [OSTI]

    Francis, A.J.; Dodge, C.; Chendrayan, K.; Quinby, H.L.

    1987-04-16

    The present invention related to an anaerobic bacterial culture of Clostridium sp. ATCC No. 53464 which solubilizes lead oxide under anaerobic conditions in coal and industrial wastes and therefore presents a method of removing lead from such wastes before they are dumped into the environment. The rat of lead dissolution during logarithmic growth of the bacteria in 40 ml medium containing 3.32 ..mu..moles of lead as lead oxide was 0.042 ..mu..moles m1/sup /-/1/ hr/sup /-/1/. Dissolution of lead oxide by the bacterial isolate is due to the production of metabolites and acidity in the culture medium. The major metabolites are acetic, butyric and lactic acid. The major metabolites are acetic, butyric and lactic acid. Clostridium sp. ATCC No. 53464 can be used in the recovery of the strategic metals from ores and wastes and also for the production of lactic acid for commercial purposes. The process yields large quantities of lactic acid as well as lead complexed in a stable form with said acids. 4 figs., 3 tabs.

  15. Anaerobic microbial dissolution of lead and production of organic acids

    DOE Patents [OSTI]

    Francis, Arokiasamy J.; Dodge, Cleveland; Chendrayan, Krishnachetty; Quinby, Helen L.

    1988-01-01

    The present invention relates to an anaerobic bacterial culture of Clostridium sp. ATCC No. 53464 which solubilizes lead oxide under anaerobic conditions in coal and industrial wastes and therefore presents a method of removing lead from such wastes before they are dumped into the environment. The rate of lead dissolution during logarithmic growth of the bacteria in 40 ml medium containing 3.32 .mu.moles of lead as lead oxide was 0.042 .mu.moles ml.sup.-1 hr.sup.-1. Dissolution of lead oxide by the bacterial isolate is due to the production of metabolites and acidity in the culture medium. The major metabolites are acetic, butyric and lactic acid. Clostridium sp. ATCC No. 53464 can be used in the recovery of strategic metals from ores and wastes and also for the production of lactic acid for commercial purposes. The process yields large quantities of lactic acid as well as lead complexed in a stable form with said acids.

  16. System for agitating the acid in a lead-acid battery

    DOE Patents [OSTI]

    Weintraub, Alvin; MacCormack, Robert S.

    1987-01-01

    A system and method for agitating the acid in a large lead-sulfuric acid storage battery of the calcium type. An air-lift is utilized to provide the agitation. The air fed to the air-lift is humidified prior to being delivered to the air-lift.

  17. Current status of environmental, health, and safety issues of nickel metal-hydride batteries for electric vehicles

    SciTech Connect (OSTI)

    Corbus, D.; Hammel, C.J.; Mark, J.

    1993-08-01

    This report identifies important environment, health, and safety issues associated with nickel metal-hydride (Ni-MH) batteries and assesses the need for further testing and analysis. Among the issues discussed are cell and battery safety, workplace health and safety, shipping requirements, and in-vehicle safety. The manufacture and recycling of Ni-MH batteries are also examined. This report also overviews the ``FH&S`` issues associated with other nickel-based electric vehicle batteries; it examines venting characteristics, toxicity of battery materials, and the status of spent batteries as a hazardous waste.

  18. Anaerobic microbial dissolution of lead and production of organic acids

    DOE Patents [OSTI]

    Francis, A.J.; Dodge, C.; Chendrayan, K.

    1986-02-28

    The present invention relates to a method of solubilizing lead, in the form of lead oxide, found in industrial wastes, before these wastes are dumped into the environment. The lead is solubilized by dissolving the lead oxide in the wastes through contact with an anaerobic bacterial culture containing the bacterium ATCC No. 53464. The solubilized lead can then be removed from the wastes by chemical separation. It could also be removed by extending the contact period with the bacterial culture. As the culture grows, the solubilized lead is removed from the wastes by bioaccumulation by the microorganism or by immobilization by a polymer-like material produced by the microorganism. At this point, the lead is then removed from the wastes when the waste material is separated from the bacterial culture. If desired, the bacterial culture could be digested at this point to yield relatively pure lead for further industrial use.

  19. Fact Sheet: Carbon-Enhanced Lead-Acid Batteries (October 2012) | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Carbon-Enhanced Lead-Acid Batteries (October 2012) Fact Sheet: Carbon-Enhanced Lead-Acid Batteries (October 2012) DOE's Energy Storage Program is funding research and testing to improve the performance and reduce the cost of lead-acid batteries. Research to understand and quantify the mechanisms responsible for the beneficial effect of carbon additions will help demonstrate the near-term feasibility of grid-scale energy storage with lead-acid batteries, and may also benefit other

  20. Fact Sheet: Carbon-Enhanced Lead-Acid Batteries (October 2012...

    Office of Environmental Management (EM)

    In 1997, researchers made two important advancements to lead-acid batteries. First, the Japan Storage Battery Company showed that adding carbon to the battery dramatically reduces ...

  1. Gas atomization processing of tin and silicon modified LaNi{sub 5} for nickel-metal hydride battery applications

    SciTech Connect (OSTI)

    Ting, J.

    1999-02-12

    Numerous researchers have studied the relevant material properties of so-called AB{sub 5} alloys for battery applications. These studies involved LaNi{sub 5} substituted alloys which were prepared using conventional cast and crush alloying techniques. While valuable to the understanding of metal hydride effects, the previous work nearly ignored the potential for alternative direct powder production methods, like high pressure gas atomization (HPGA). Thus, there is a need to understand the relationship between gas atomization processes, powder particle solidification phases, and hydrogen absorption properties of ultra fine (< 25 {micro}m) atomized powders with high surface area for enhanced battery performance. Concurrently, development of a gas atomization nozzle that is more efficient than all current designs is needed to increase the yield of ultrafine AB{sub 5} alloy powder for further processing advantage. Gas atomization processing of the AB{sub 5} alloys was demonstrated to be effective in producing ultrafine spherical powders that were resilient to hydrogen cycling for the benefit of improving corrosion resistance in battery application. These ultrafine powders benefited from the rapid solidification process by having refined solute segregation in the microstructure of the gas atomized powders which enabled a rapid anneal treatment of the powders. The author has demonstrated the ability to produce high yields of ultrafine powder efficiently and cost effectively, using the new HPGA-III technology. Thus, the potential benefits of processing AB{sub 5} alloys using the new HPGA technology could reduce manufacturing cost of nickel-metal hydride powder. In the near future, the manufacture of AB{sub 5} alloy powders could become a continuous and rapid production process. The economic benefit of an improved AB{sub 5} production process may thereby encourage the use of nickel-metal hydride rechargeable batteries in electrical vehicle applications in the foreseeable

  2. Lead-acid battery companies join forces with Argonne National Laboratory to

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    enhance battery performance | Argonne National Laboratory Lead-acid battery companies join forces with Argonne National Laboratory to enhance battery performance September 1, 2016 Tweet EmailPrint Exploring the unrealized potential of lead batteries is the goal of a new collaboration between the U.S. Department of Energy's Argonne National Laboratory and two leading lead recycling and lead battery manufacturing companies, RSR Technologies and East Penn Manufacturing. The collaboration will

  3. DOE specification: Valve-regulated type lead-acid storage batteries

    SciTech Connect (OSTI)

    1996-08-01

    This document contains a ``fill-in-the-blanks`` guide specification for procurement of sealed valve-regulated type lead-acid storage batteries, for uninterruptible power supply applications.

  4. DOE-SPEC-3018-96; Flooded-Type Lead-Acid Storage Batteries

    Broader source: Energy.gov (indexed) [DOE]

    DOE SPECIFICATION FLOODED-TYPE LEAD-ACID STORAGE BATTERIES U.S. Department of Energy FSC 6140 Washington, ... proposal &21; Appendix B: Battery system data sheets to be completed by ...

  5. Delta-aminolevulinic acid dehydratase (ALAD) polymorphism in lead exposed Bangladeshi children and its effect on urinary aminolevulinic acid (ALA)

    SciTech Connect (OSTI)

    Tasmin, Saira; Furusawa, Hana; Ahmad, Sk. Akhtar; Watanabe, Chiho

    2015-01-15

    Background and objective: Lead has long been recognized as a harmful environmental pollutant. People in developing countries like Bangladesh still have a higher risk of lead exposure. Previous research has suggested that the delta-aminolevulinic acid dehydratase (ALAD) genotype can modify lead toxicity and individual susceptibility. As children are more susceptible to lead-induced toxicity, this study investigated whether the ALAD genotype influenced urinary excretion of delta-aminolevulinic acid (U-ALA) among children exposed to environmental lead in Bangladesh. Methods: Subjects were elementary schoolchildren from a semi-urban industrialized area in Bangladesh. A total of 222 children were studied. Blood and urine were collected to determine ALAD genotypes, blood lead levels and urinary aminolevulinic acid (U-ALA). Results: The mean BPb level was 9.7 µg/dl for the study children. BPb was significantly positively correlated with hemoglobin (p<0.01). In total, allele frequency for ALAD 1 and 2 was 0.83 and 0.17 respectively. The mean U-ALA concentration was lower in ALAD1-2/2-2 carriers than ALAD1-1 carriers for boys (p=0.001). But for girls, U-ALA did not differ significantly by genotype (p=0.26). When U-ALA was compared by genotype at the same exposure level in a multiple linear regression analysis, boys who were ALAD1-2/2-2 carriers still had a lower level of U-ALA compared to ALAD1-1carriers. Conclusion: This study provides information about the influence of ALAD polymorphism and its association with U-ALA in Bangladeshi children. Our results indicate that the ALAD1-2/2-2 genotype may have a protective effect in terms of U-ALA for environmentally lead exposed boys. - Highlights: • High blood lead level for the environmentally exposed schoolchildren. • BPb was significantly correlated with U-ALA and Hb. • Effect of ALAD genotype on U-ALA is differed by sex. • Lower U-ALA in ALAD2 than ALAD1 carriers only for boys at same exposure.

  6. Electric and hybrid vehicles charge efficiency tests of ESB EV-106 lead-acid batteries

    SciTech Connect (OSTI)

    Rowlette, J.J.

    1981-01-15

    Charge efficiencies were determined for ESB EV-106 lead-acid batteries by measurements made under widely differing conditions of temperature, charge procedure, and battery age. The measurements were used to optimize charge procedures and to evaluate the concept of a modified, coulometric state-of-charge indicator. Charge efficiency determinations were made by measuring gassing rates and oxygen fractions. A novel, positive displacement gas flow meter which proved to be both simple and highly accurate is described and illustrated.

  7. DOE-SPEC-3019-96; Valve-Regulated Type Lead-Acid Storage Batteries

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    9-96 August 1996 DOE SPECIFICATION VALVE-REGULATED TYPE LEAD-ACID STORAGE BATTERIES U.S. Department of Energy FSC 6140 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of

  8. Reliability of valve-regulated lead-acid batteries for stationary applications.

    SciTech Connect (OSTI)

    De Anda, Mindi Farber; Butler, Paul Charles; Miller, Jennifer L; Moseley, Patrick T.

    2004-03-01

    A survey has been carried out to quantify the performance and life of over 700,000 valve-regulated lead-acid (VRLA) cells, which have been or are being used in stationary applications across the United States. The findings derived from this study have not identified any fundamental flaws of VRLA battery technology. There is evidence that some cell designs are more successful in float duty than others. A significant number of the VRLA cells covered by the survey were found to have provided satisfactory performance.

  9. AVTA: 2010 Honda Civic HEV with Experimental Ultra Lead Acid Battery Testing Results

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The following reports describe results of testing done on a 2010 Civic hybrid electric vehicle with an advanced experimental ultra-lead acid battery, an experimental vehicle not for sale. The baseline performance testing provides a point of comparison for the other test results. Taken together, these reports give an overall view of how this vehicle functions under extensive testing. This research was conducted by Idaho National Laboratory.

  10. Field Operations Program Chevrolet S-10 (Lead-Acid) Accelerated Reliability Testing - Final Report

    SciTech Connect (OSTI)

    J. Francfort; J. Argueta; M. Wehrey; D. Karner; L. Tyree

    1999-07-01

    This report summarizes the Accelerated Reliability testing of five lead-acid battery-equipped Chevrolet S-10 electric vehicles by the US Department of Energy's Field Operations Program and the Program's testing partners, Electric Transportation Applications (ETA) and Southern California Edison (SCE). ETA and SCE operated the S-10s with the goal of placing 25,000 miles on each vehicle within 1 year, providing an accelerated life-cycle analysis. The testing was performed according to established and published test procedures. The S-10s' average ranges were highest during summer months; changes in ambient temperature from night to day and from season-to-season impacted range by as much as 10 miles. Drivers also noted that excessive use of power during acceleration also had a dramatic effect on vehicle range. The spirited performance of the S-10s created a great temptation to inexperienced electric vehicle drivers to ''have a good time'' and to fully utilize the S-10's acceleration capability. The price of injudicious use of power is greatly reduced range and a long-term reduction in battery life. The range using full-power accelerations followed by rapid deceleration in city driving has been 20 miles or less.

  11. Epidemiological-environemental study of lead acid battery workers. III. Chronic effects of sulfuric acid on the respiratory system and teeth

    SciTech Connect (OSTI)

    Gamble, J.; Jones, W.; Hancock, J.; Meckstroth, R.L.

    1984-10-01

    The effects of long-term exposure to sulfuric acid mist on the teeth and respiratory system were studied in 248 workers in five plants manufacturing lead acid batteries. The prevalence of cough, phlegm, dyspnea, and wheezing as determined by questionnaire were not associated with estimates of cumulative acid exposure. There was only one case of irregular opacities seen on the chest radiographs. There was no statistically significant association of reduced FEV/sub 1/ peak flow, FEF/sub 50/, and FEF/sub 75/ with acid exposure although the higher exposed group had lower mean values. FVC in the high exposure group showed a statistically significant reductioon compared to the low exposure group but there was no significant association when exposure was analyzed as a continuous variable. The ratio of observed to expected prevalence of teeth etching and erosion was about four times greater in the high acid-exposure group. The earliest case of etching occured after 4 months exposure to an estimated average exposure of 0.23 mg/m/sup 3/ sulfuric acid.

  12. Acid sphingomyelinase (aSMase) deficiency leads to abnormal microglia behavior and disturbed retinal function

    SciTech Connect (OSTI)

    Dannhausen, Katharina; Karlstetter, Marcus; Caramoy, Albert; Volz, Cornelia; Jägle, Herbert; Liebisch, Gerhard; Utermöhlen, Olaf; Langmann, Thomas

    2015-08-21

    Mutations in the acid sphingomyelinase (aSMase) coding gene sphingomyelin phosphodiesterase 1 (SMPD1) cause Niemann-Pick disease (NPD) type A and B. Sphingomyelin storage in cells of the mononuclear phagocyte system cause hepatosplenomegaly and severe neurodegeneration in the brain of NPD patients. However, the effects of aSMase deficiency on retinal structure and microglial behavior have not been addressed in detail yet. Here, we demonstrate that retinas of aSMase{sup −/−} mice did not display overt neuronal degeneration but showed significantly reduced scotopic and photopic responses in electroretinography. In vivo fundus imaging of aSMase{sup −/−} mice showed many hyperreflective spots and staining for the retinal microglia marker Iba1 revealed massive proliferation of retinal microglia that had significantly enlarged somata. Nile red staining detected prominent phospholipid inclusions in microglia and lipid analysis showed significantly increased sphingomyelin levels in retinas of aSMase{sup −/−} mice. In conclusion, the aSMase-deficient mouse is the first example in which microglial lipid inclusions are directly related to a loss of retinal function. - Highlights: • aSMase-deficient mice show impaired retinal function and reactive microgliosis. • aSMase-deficient microglia express pro-inflammatory transcripts. • aSMase-deficient microglia proliferate and have increased cell body size. • In vivo imaging shows hyperreflective spots in the fundus of aSMase-deficient mice. • aSMase-deficient microglia accumulate sphingolipid-rich intracellular deposits.

  13. Research, development, and demonstration of lead-acid batteries for electric-vehicle propulsion. Annual report, 1980

    SciTech Connect (OSTI)

    Not Available

    1981-03-01

    The first development effort in improving lead-acid batteries fore electric vehicles was the improvement of electric vehicle batteries using flat pasted positive plates and the second was for a tubular long life positive plate. The investigation of 32 component variables based on a flat pasted positive plate configuration is described. The experiment tested 96 - six volt batteries for characterization at 0, 25, and 40/sup 0/C and for cycle life capability at the 3 hour discharge rate with a one cycle, to 80% DOD, per day regime. Four positive paste formulations were selected. Two commercially available microporous separators were used in conjunction with a layer of 0.076 mm thick glass mat. Two concentrations of battery grade sulfuric acid were included in the test to determine if an increase in concentration would improve the battery capacity sufficient to offset the added weight of the more concentrated solution. Two construction variations, 23 plate elements with outside negative plates and 23 plate elements with outside positive plates, were included. The second development effort was an experiment designed to study the relationship of 32 component variables based on a tubular positive plate configuration. 96-six volt batteries were tested at various discharge rates at 0, 25, and 40/sup 0/C along with cycle life testing at 80% DOD of the 3 hour rate. 75 batteries remain on cycle life testing with 17 batteries having in excess of 365 life cycles. Preliminary conclusions indicate: the tubular positive plate is far more capable of withstanding deep cycles than is the flat pasted plate; as presently designed 40 Whr/kg can not be achieved, since 37.7 Whr/kg was the best tubular data obtained; electrolyte circulation is impaired due to the tight element fit in the container; and a redesign is required to reduce the battery weight which will improve the Whr/kg value. This redesign is complete and new molds have been ordered.

  14. Steps to Commercialization: Nickel Metal Hydride Batteries |...

    Broader source: Energy.gov (indexed) [DOE]

    funds cutting-edge research on a broad range of topics ranging from advanced battery construction to the modeling of industrial processes and supercomputer simulation of...

  15. LEADING WITH LEADING INDICATORS

    SciTech Connect (OSTI)

    PREVETTE, S.S.

    2005-01-27

    This paper documents Fluor Hanford's use of Leading Indicators, management leadership, and statistical methodology in order to improve safe performance of work. By applying these methods, Fluor Hanford achieved a significant reduction in injury rates in 2003 and 2004, and the improvement continues today. The integration of data, leadership, and teamwork pays off with improved safety performance and credibility with the customer. The use of Statistical Process Control, Pareto Charts, and Systems Thinking and their effect on management decisions and employee involvement are discussed. Included are practical examples of choosing leading indicators. A statistically based color coded dashboard presentation system methodology is provided. These tools, management theories and methods, coupled with involved leadership and employee efforts, directly led to significant improvements in worker safety and health, and environmental protection and restoration at one of the nation's largest nuclear cleanup sites.

  16. Fetal and neonatal exposure to nicotine leads to augmented hepatic and circulating triglycerides in adult male offspring due to increased expression of fatty acid synthase

    SciTech Connect (OSTI)

    Ma, Noelle; Nicholson, Catherine J.; Wong, Michael; Holloway, Alison C.; Hardy, Daniel B.

    2014-02-15

    While nicotine replacement therapy is assumed to be a safer alternative to smoking during pregnancy, the long-term consequences for the offspring remain elusive. Animal studies now suggest that maternal nicotine exposure during perinatal life leads to a wide range of adverse outcomes for the offspring including increased adiposity. The focus of this study was to investigate if nicotine exposure during pregnancy and lactation leads to alterations in hepatic triglyceride synthesis. Female Wistar rats were randomly assigned to receive daily subcutaneous injections of saline (vehicle) or nicotine bitartrate (1 mg/kg/day) for two weeks prior to mating until weaning. At postnatal day 180 (PND 180), nicotine exposed offspring exhibited significantly elevated levels of circulating and hepatic triglycerides in the male offspring. This was concomitant with increased expression of fatty acid synthase (FAS), the critical hepatic enzyme in de novo triglyceride synthesis. Given that FAS is regulated by the nuclear receptor Liver X receptor (LXR?), we measured LXR? expression in both control and nicotine-exposed offspring. Nicotine exposure during pregnancy and lactation led to an increase in hepatic LXR? protein expression and enriched binding to the putative LXRE element on the FAS promoter in PND 180 male offspring. This was also associated with significantly enhanced acetylation of histone H3 [K9,14] surrounding the FAS promoter, a hallmark of chromatin activation. Collectively, these findings suggest that nicotine exposure during pregnancy and lactation leads to an increase in circulating and hepatic triglycerides long-term via changes in the transcriptional and epigenetic regulation of the hepatic lipogenic pathway. - Highlights: Our data reveals the links nicotine exposure in utero and long-term hypertriglyceridemia. It is due to nicotine-induced augmented expression of hepatic FAS and LXR? activity. Moreover, this involves nicotine-induced enhanced acetylation of

  17. Standard operating procedure for the laboratory analysis of lead in paint, bulk dust, and soil by ultrasonic, acid digestion and inductively coupled plasma emission spectrometric measurement

    SciTech Connect (OSTI)

    Grohse, P.M.; Gutknecht, W.F.; Luk, K.K.; Wilson, B.M.; Van Hise, C.C.

    1997-09-01

    The details and performance of a simplified extraction procedure and analysis for three media are provided. Paint, bulk dust, and soil are collected using standard or referenced methods. Up to 0.25 g of paint, bulk dust, or soil weighted out and placed in a 50-mL centrifuge tube. Five mL of 25% (v/v) nitric acid is added and the sample is ultrasonicated for 30 minutes.

  18. Dissolution of lead paint in aqueous solutions

    SciTech Connect (OSTI)

    Barnes, G.L.; Davis, A.P.

    1996-07-01

    An analysis of the rate and extent of lead leaching from a lead-based paint was completed. At low-solution pH, dissolution was rapid and approached 80% of the total lead. Residual lead can be estimated based on the predicted solubility of lead carbonate and basic lead carbonate. Release of lead from the paint was slower than that from pure basic lead carbonate due to inhibition by the paint matrix. Although the dissolved concentration of lead in solution at neutral/high pH was low, the paint binder was apparently destroyed at these pH values, releasing colloidal lead pigment particles. The presence of ethylenediaminetetraacetic acid (EDTA) and nitrilotriacetic acid (NTA) enhanced both the rate and degree of lead dissolution, while benzoic acid had a minimal effect.

  19. Stabilization of Nickel Metal Catalysts for Aqueous Processing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    over a range of temperatures from 200C to 450C. However, these catalysts lose activity over time and must be replenished with new supports to continue facilitating the...

  20. Soluble Lead Flow Battery: Soluble Lead Flow Battery Technology

    SciTech Connect (OSTI)

    2010-09-01

    GRIDS Project: General Atomics is developing a flow battery technology based on chemistry similar to that used in the traditional lead-acid battery found in nearly every car on the road today. Flow batteries store energy in chemicals that are held in tanks outside the battery. When the energy is needed, the chemicals are pumped through the battery. Using the same basic chemistry as a traditional battery but storing its energy outside of the cell allows for the use of very low cost materials. The goal is to develop a system that is far more durable than today’s lead-acid batteries, can be scaled to deliver megawatts of power, and which lowers the cost of energy storage below $100 per kilowatt hour.

  1. Getting the Lead Out

    DOE R&D Accomplishments [OSTI]

    Gibson, Kerry

    2011-04-08

    Discarded electronics no longer pose an environmental hazard from lead solder thanks to a lead-free alternative developed at the Ames Laboratory.

  2. VOLUMETRIC LEAD ASSAY

    SciTech Connect (OSTI)

    M.A. Ebadian, Ph.D.; S.K. Dua; David Roelant; Sachin Kumar

    2001-01-01

    This report describes a system for handling and radioassay of lead, consisting of a robot, a conveyor, and a gamma spectrometer. The report also presents a cost-benefit analysis of options: radioassay and recycling lead vs. disposal as waste.

  3. Lead carbonate scintillator materials

    DOE Patents [OSTI]

    Derenzo, Stephen E.; Moses, William W.

    1991-01-01

    Improved radiation detectors containing lead carbonate or basic lead carbonate as the scintillator element are disclosed. Both of these scintillators have been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to other known scintillator materials. The radiation detectors disclosed are favorably suited for use in general purpose detection and in medical uses.

  4. lead paint chart

    Office of Environmental Management (EM)

    1930 Assume Lead Will WX Disturb Paint? No Yes Will WX Disturb More than 2 ft 2 . per Room? Yes HUD Housing or Using HUD ? Yes More than 50ugm 3 ? No LSW & HUD Rule 35.900 **...

  5. Lead carbonate scintillator materials

    DOE Patents [OSTI]

    Derenzo, S.E.; Moses, W.W.

    1991-05-14

    Improved radiation detectors containing lead carbonate or basic lead carbonate as the scintillator element are disclosed. Both of these scintillators have been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to other known scintillator materials. The radiation detectors disclosed are favorably suited for use in general purpose detection and in medical uses. 3 figures.

  6. Energy and environmental impacts of electric vehicle battery production and recycling

    SciTech Connect (OSTI)

    Gaines, L.; Singh, M.

    1995-12-31

    Electric vehicle batteries use energy and generate environmental residuals when they are produced and recycled. This study estimates, for 4 selected battery types (advanced lead-acid, sodium-sulfur, nickel-cadmium, and nickel-metal hydride), the impacts of production and recycling of the materials used in electric vehicle batteries. These impacts are compared, with special attention to the locations of the emissions. It is found that the choice among batteries for electric vehicles involves tradeoffs among impacts. For example, although the nickel-cadmium and nickel-metal hydride batteries are similar, energy requirements for production of the cadmium electrodes may be higher than those for the metal hydride electrodes, but the latter may be more difficult to recycle.

  7. LEAD SEVERING CONTRIVANCE

    DOE Patents [OSTI]

    Widmaier, W.

    1958-04-01

    A means for breaking an electrical circuit within an electronic tube during the process of manufacture is described. Frequently such circuits must be employed for gettering or vapor coating purposes, however, since an external pair of corector pins having no use after manufacture, is undesirable, this invention permits the use of existing leads to form a temporary circuit during manufacture, and severing it thereafter. One portion of the temporary circuit, made from a springy material such as tungsten, is spot welded to a fusable member. To cut the circuit an external radiant heat source melts the fusable member, allowing the tensed tungsten spring to contract and break the circuit. This inexpensive arrangement is particularly useful when the tube has a great many external leads crowded into the tube base.

  8. Generating Energy Efficiency Project Leads and Allocating Leads to

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Contractors | Department of Energy Energy Efficiency Project Leads and Allocating Leads to Contractors Generating Energy Efficiency Project Leads and Allocating Leads to Contractors Better Buildings Residential Network Peer Exchange Call Series: Generating Energy Efficiency Project Leads and Allocating Leads to Contractors, Call Slides and Discussion Summary, February 26, 2015. Call Slides and Discussion Summary (2.1 MB) More Documents & Publications Unique Fee-for-Service Revenues Think

  9. Generating Energy Efficiency Project Leads and Allocating Leads...

    Energy Savers [EERE]

    Generating Energy Efficiency Project Leads and Allocating Leads to Contractors Better Buildings Residential Network Peer Exchange Call Series: Generating Energy Efficiency Project ...

  10. Home refinishing, lead paint, and infant blood lead levels

    SciTech Connect (OSTI)

    Rabinowitz, M.; Leviton, A.; Bellinger, D.

    1985-04-01

    The blood lead levels of 249 infants were measured semi-annually from birth to two years of age; the home paint was sampled and any recent home refinishing activity recorded. Mean blood lead from birth to age 2 years did not vary systematically with age but did correlate significantly with the amount of lead in the indoor paint. Refinishing activity in homes with high lead paint was associated with elevations of blood lead averaging 69 per cent.

  11. Breakthrough: Lead-free Solder

    ScienceCinema (OSTI)

    Anderson, Iver

    2013-03-01

    Ames Laboratory senior metallurgist Iver Anderson explains the importance of lead-free solder in taking hazardous lead out of the environment by eliminating it from discarded computers and electronics that wind up in landfills. Anderson led a team that developed a tin-silver-copper replacement for traditional lead-tin solder that has been adopted by more than 50 companies worldwide.

  12. Lead-based paint assessment

    SciTech Connect (OSTI)

    Lorie, C.; Cowdery, J.W.

    1994-12-31

    In 1977, The US consumer product safety commission banned the use of lead-based paint (LBP) in all industries, except the maritime industry which still has certain privileged uses. Unfortunately for property and building owners, the ban did not come soon enough. In response to this heightened awareness, several environmental market sectors addressing the issues have emerged. These include: residential; soil; commercial; water; and structures. The first and most important step in addressing the concerns posed by the existence of lead based contamination is to quantify the amount of lead-based product, to determine the location of the lead based product and the extent, if any, of lead based contamination, and to make recommendations for the remediation or abatement of the lead product and resultant contamination. In narrowing the focus of these issues, this paper discusses lead-based paint assessment; preparing and organizing the assessment, the regulatory considerations, assessment methodology, and presentation of results.

  13. Method Of Charging Maintenance-Free Nickel Metal Hydride Storage Cells

    DOE Patents [OSTI]

    Berlureau, Thierry; Liska, Jean-Louis

    1999-11-16

    A method of charging an industrial maintenance-free Ni-MH storage cell, the method comprising in combination a first stage at a constant current I.sub.1 lying in the range I.sub.c /10 to I.sub.c /2, and a second stage at a constant current I.sub.2 lying in the range I.sub.c /50 to I.sub.c /10, the changeover from the first stage to the second stage taking place when the time derivative of the temperature reaches a threshold value which varies as a function of the temperature at the time of the changeover.

  14. One Vaccine Leads to Another

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy One Thing Leads to Another: How NETL Research Saves Lives One Thing Leads to Another: How NETL Research Saves Lives August 8, 2013 - 10:57am Addthis One Thing Leads to Another: How NETL Research Saves Lives Learn More The coronary stent was developed as part of NETL's Technology Transfer program. NETL's technology portfolio contains a broad range of innovations that have resulted from research in areas such as carbon capture and sequestration, mercury capture, fuel cells, sensors and

  15. High temperature superconductor current leads

    DOE Patents [OSTI]

    Hull, John R.; Poeppel, Roger B.

    1995-01-01

    An electrical lead having one end for connection to an apparatus in a cryogenic environment and the other end for connection to an apparatus outside the cryogenic environment. The electrical lead includes a high temperature superconductor wire and an electrically conductive material distributed therein, where the conductive material is present at the one end of the lead at a concentration in the range of from 0 to about 3% by volume, and at the other end of the lead at a concentration of less than about 20% by volume. Various embodiments are shown for groups of high temperature superconductor wires and sheaths.

  16. High temperature superconductor current leads

    DOE Patents [OSTI]

    Hull, J.R.; Poeppel, R.B.

    1995-06-20

    An electrical lead is disclosed having one end for connection to an apparatus in a cryogenic environment and the other end for connection to an apparatus outside the cryogenic environment. The electrical lead includes a high temperature superconductor wire and an electrically conductive material distributed therein, where the conductive material is present at the one end of the lead at a concentration in the range of from 0 to about 3% by volume, and at the other end of the lead at a concentration of less than about 20% by volume. Various embodiments are shown for groups of high temperature superconductor wires and sheaths. 9 figs.

  17. One Vaccine Leads to Another

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    One Vaccine Leads to Another Print Diphtheria is a potentially lethal respiratory disease that is fairly well controlled by vaccines discovered early last century. These vaccines...

  18. Lead-free primary explosives

    DOE Patents [OSTI]

    Huynh, My Hang V.

    2010-06-22

    Lead-free primary explosives of the formula (cat).sub.Y[M.sup.II(T).sub.X(H.sub.2O).sub.6-X].sub.Z, where T is 5-nitrotetrazolate, and syntheses thereof are described. Substantially stoichiometric equivalents of the reactants lead to high yields of pure compositions thereby avoiding dangerous purification steps.

  19. NATIONAL LEAD COMPANY OF OHIO

    Office of Legacy Management (LM)

    8 Radiatlon Dept. 3 Water Treatment Plant (Far W&or Spnphs Only) NILHhS-1?6 (RFV lO... 8 Radiation Dept. 3 Water Treotmnt Plant (Fw Wkr bnplos Only) NATIONAL. LEAD ...

  20. One Vaccine Leads to Another

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    One Vaccine Leads to Another One Vaccine Leads to Another Print Friday, 24 May 2013 11:19 Diphtheria is a potentially lethal respiratory disease that is fairly well controlled by vaccines discovered early last century. These vaccines have been extremely effective; studies on one vaccine in particular, the nontoxic form of the diphtheria toxin (DT), have informed other vaccines. Recently, researchers at Novartis GNF solved several structures of a nontoxic DT using data obtained at ALS Beamline

  1. Industrial lead paint removal specifications

    SciTech Connect (OSTI)

    Stone, R.C.

    1997-06-01

    The purpose of this paper is to inform the reader as to some of the pertinent rules and regulations promulgated by the Environmental Protection Agency (EPA) and the Occupational Safety and Health Administration (OSHA) that may effect an industrial lead paint removal project. The paper discusses a recommended schedule of procedures and preparations to be followed by the lead paint removal specification writer when analyzing the possible impact of the project on the environment, the public and workers. Implications of the Clean Air Act, the Clean Water Act and the Resource Conservation and Recovery Act (RCRA) along with hazardous waste handling, manifesting, transporting and disposal procedures are discussed with special emphasis placed as to their impact on the writer and the facility owner. As the rules and regulations are highly complex, the writer has attempted to explain the methodology currently being used in state-of-the-art industrial lead abatement specifications.

  2. Leading the Charge: Christine Klein

    Office of Energy Efficiency and Renewable Energy (EERE)

    Change doesn’t happen on its own. It’s led by dedicated and passionate people who are committed to empowering Indian Country to energize future generations. Leading the Charge is a regular Office of Indian Energy newsletter feature spotlighting the movers and shakers in energy development on tribal lands. In this issue, we talk to Christine Klein, an adopted Haida who is leading efforts to help Alaska Native villages address their energy challenges in her role as Vice President and Chief Operating Officer of the Calista Corporation.

  3. Batteries called primary source of lead, cadmium in municipal waste

    SciTech Connect (OSTI)

    Not Available

    1989-04-01

    The US Environmental Protection Agency reports that lead-acid batteries, such as those used in automobiles, and rechargeable nickel-cadmium batteries used in consumer electronics equipment, are the primary sources of lead and cadmium in municipal trash and garbage. A report prepared for EPA analyzed existing data from 1970 to 1986 and made projections to the year 2000. Lead-acid batteries continue to constitute a major source of lead in garbage even though 80 percent of them are now recycled. As a result, EPA is calling for additional recycling of batteries. This study is an important step in implementing EPA's strategy for helping states and cities achieve the national goal of recycling and reducing 25 percent of all municipal garbage by 1992. The findings on batteries are the result of a study conducted for EPA because of concern over the levels of lead and cadmium found n ash (residue) from municipal waste incinerators. Lead and cadmium are two metals of particular concern in the solid waste stream. The metals can contaminate soil and groundwater when landfilled. They also may be found in some incinerator emissions.

  4. NATIONAL LEAD COMPANY OF OHIO

    Office of Legacy Management (LM)

    t-t AL- 1. + T fi r,y* t ,.- . NATIONAL LEAD COMPANY OF OHIO Ofll i iy Ci)wp HEALTH AND SAFETY DIVISION - ANALYTICAL DEPT. ANALYTICAL DATA SHEET U-G b ;33y jl:tL G c-w &3(y I...

  5. One Vaccine Leads to Another

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    One Vaccine Leads to Another Print Diphtheria is a potentially lethal respiratory disease that is fairly well controlled by vaccines discovered early last century. These vaccines have been extremely effective; studies on one vaccine in particular, the nontoxic form of the diphtheria toxin (DT), have informed other vaccines. Recently, researchers at Novartis GNF solved several structures of a nontoxic DT using data obtained at ALS Beamline 5.0.3, resolving a long-standing scientific puzzle and

  6. NATIONAL LEAD COMPANY OF OHIO

    Office of Legacy Management (LM)

    ~y-f-hjLo-- yy; 4: j ).,Ic +- NATIONAL LEAD COMPANY OF OHIO s _ HEALTH AND SAFETY DIVISION - ANALYTICAL DEPT. . ANALYTICAL DATA SHEET o-0 1. H. NO. TRIAL, HYGIENE AND RADIATION DEPT. AMPLE Nti.1. //- 6:itEC TEDI it/;/L 5 .,- -..-- -- -.._-. -. I --- --- 1 ANALYTICA .OATE RECeiVEDi mri /-2-v& 3 Li >,a. HCJ _-..k.-*..- -.v._ 1 NO. DISTRIBUTION OF COPIES 1 Analytlcal Labwatwy (RECORD COPP) 2 Industrial Hygiene 8 Radlation Dept. . 3' Water Treatment Plant (Far Water Smmplos Only)' t' , /,' 30

  7. Hydroxycarboxylic acids and salts

    SciTech Connect (OSTI)

    Kiely, Donald E; Hash, Kirk R; Kramer-Presta, Kylie; Smith, Tyler N

    2015-02-24

    Compositions which inhibit corrosion and alter the physical properties of concrete (admixtures) are prepared from salt mixtures of hydroxycarboxylic acids, carboxylic acids, and nitric acid. The salt mixtures are prepared by neutralizing acid product mixtures from the oxidation of polyols using nitric acid and oxygen as the oxidizing agents. Nitric acid is removed from the hydroxycarboxylic acids by evaporation and diffusion dialysis.

  8. What is lead-based paint

    SciTech Connect (OSTI)

    Vernon, L.S.

    1994-03-01

    The number of variety of lead-abatement regulations and requirements make it difficult and confusing to identify and properly respond to dangerous levels of lead in every situation. Definitions of lead-based paint'' and three test methods for lead detection are described to help determine when and how to test for the presence of lead.

  9. NATIONAL LEAD COMPANY OF OHIO

    Office of Legacy Management (LM)

    t-t AL- 1. + T fi r,y* t ,.- . NATIONAL LEAD COMPANY OF OHIO Of~~l=l i iy Ci)wp HEALTH AND SAFETY DIVISION - ANALYTICAL DEPT. ANALYTICAL DATA SHEET U-G b ;33y jl:tL G c-w &3(/y I 53 .3 Y5 .y j.os-- ! stz77y t3r1: my I CLvru' f<? 3;/ ' > j!OS ! I I I 1 P-/) ' If I , m 6.3 Lg- /&IL -q-&.+&L, /I a V Q/);: /(Lx 3L- NO. DISTRIBUTION OF COPIES 1 Analytical Laboratory (RECORD COPY) 2 Industrial Hygiene 8 Radiation Dept. Plnnt NLO-HbS-736 IREV. lo/:m4/601 - -_.-__- - ---

  10. Multi-lead heat sink

    DOE Patents [OSTI]

    Roose, L.D.

    1982-08-25

    The disclosure relates to a heat sink used to protect integrated circuits from the heat resulting from soldering them to circuit boards. A tubular housing contains a slidable member which engages somewhat inwardly extending connecting rods, each of which is rotatably attached at one end to the bottom of the housing. The other end of each rod is fastened to an expandable coil spring loop. As the member is pushed downward in the housing, its bottom edge engages and forces outward the connecting rods, thereby expanding the spring so that it will fit over an integrated circuit. After the device is in place, the member is slid upward and the spring contracts about the leads of the integrated circuit. Soldering is now conducted and the spring absorbs excess heat therefrom to protect the integrated circuit. The placement steps are repeated in reverse order to remove the heat sink for use again.

  11. Multi-lead heat sink

    DOE Patents [OSTI]

    Roose, L.D.

    1984-07-03

    The disclosure relates to a heat sink used to protect integrated circuits from the heat resulting from soldering them to circuit boards. A tubular housing contains a slidable member which engages somewhat inwardly extending connecting rods, each of which is rotatably attached at one end to the bottom of the housing. The other end of each rod is fastened to an expandable coil spring loop. As the member is pushed downward in the housing, its bottom edge engages and forces outward the connecting rods, thereby expanding the spring so that it will fit over an integrated circuit. After the device is in place, the member is slid upward and the spring contracts about the leads of the integrated circuit. Soldering is now conducted and the spring absorbs excess heat therefrom to protect the integrated circuit. The placement steps are repeated in reverse order to remove the heat sink for use again. 4 figs.

  12. Multi-lead heat sink

    DOE Patents [OSTI]

    Roose, Lars D.

    1984-01-01

    The disclosure relates to a heat sink used to protect integrated circuits from the heat resulting from soldering them to circuit boards. A tubular housing contains a slidable member which engages somewhat inwardly extending connecting rods, each of which is rotatably attached at one end to the bottom of the housing. The other end of each rod is fastened to an expandable coil spring loop. As the member is pushed downward in the housing, its bottom edge engages and forces outward the connecting rods, thereby expanding the spring so that it will fit over an integrated circuit. After the device is in place, the member is slid upward and the spring contracts about the leads of the integrated circuit. Soldering is now conducted and the spring absorbs excess heat therefrom to protect the integrated circuit. The placement steps are repeated in reverse order to remove the heat sink for use again.

  13. Low Emissions Asian Development (LEAD) Program - Bangladesh ...

    Open Energy Info (EERE)

    Low Emissions Asian Development (LEAD) Program - Bangladesh Redirect page Jump to: navigation, search REDIRECT Low Emissions Asian Development (LEAD) Program Retrieved from...

  14. Lead phosphate glass compositions for optical components

    DOE Patents [OSTI]

    Sales, Brian C.; Boatner, Lynn A.

    1987-01-01

    A lead phosphate glass to which has been added indium oxide or scandium oe to improve chemical durability and provide a lead phosphate glass with good optical properties.

  15. David Skinner Named NERSC Strategic Partnerships Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    David Skinner Named NERSC Strategic Partnerships Lead David Skinner Named NERSC Strategic Partnerships Lead January 24, 2014 Contact: Linda Vu, +1 510 495 2402, lvu@lbl.gov...

  16. Downregulation of Cinnamyl Alcohol Dehydrogenase (CAD) Leads...

    Office of Scientific and Technical Information (OSTI)

    (CAD) Leads to Improved Saccharification Efficiency in Switchgrass Citation Details In-Document Search Title: Downregulation of Cinnamyl Alcohol Dehydrogenase (CAD) Leads ...

  17. Distributed Generation Lead-by-Example Resources

    Broader source: Energy.gov [DOE]

    State governments can lead by example by promoting renewable energy programs and policies. Efforts to lead by example include using renewable energy resources (including alternative fuel for...

  18. Heavy Isotopes Lead Materials Management Organization (LMMO)...

    Office of Scientific and Technical Information (OSTI)

    Heavy Isotopes Lead Materials Management Organization (LMMO) Update Citation Details In-Document Search Title: Heavy Isotopes Lead Materials Management Organization (LMMO) Update ...

  19. Cities Leading through Energy Analysis and Planning

    Broader source: Energy.gov [DOE]

    The Cities Leading through Energy Analysis and Planning (Cities-LEAP) project delivers standardized, localized energy data and analysis that enables cities to lead clean energy innovation and...

  20. Isotopic generator for bismuth-212 and lead-212 from radium

    DOE Patents [OSTI]

    Atcher, Robert W.; Friedman, Arnold M.; Hines, John

    1987-01-01

    A method and apparatus for providing radionuclides of bismuth-212 and lead-212. Thorium-228 and carrier solution starting material is input to a radiologically contained portion of an isotopic generator system, and radium-224 is separated from thorium-228 which is retained by a strongly basic anion exchange column. The separated radium-224 is transferred to an accessible, strongly acidic cationic exchange column. The cationic column retains the radium-224, and natural radioactive decay generates bismuth-212 and lead-212. The cationic exchange column can also be separated from the contained portion of the system and utilized without the extraordinary safety measures necessary in the contained portion. Furthermore, the cationic exchange column provides over a relatively long time period the short lived lead-212 and bismuth-212 radionuclides which are useful for a variety of medical therapies.

  1. Results from the Cooler and Lead Tests

    SciTech Connect (OSTI)

    Green, Michael A

    2010-06-10

    The report presents the results of testing MICE spectrometer magnet current leads on a test apparatus that combines both the copper leads and the high temperature superconducting (HTS) leads with a single Cryomech PT415 cooler and liquid helium tank. The current is carried through the copper leads from 300 K to the top of the HTS leads. The current is then carried through the HTS leads to a feed-through from the vacuum space to the inside of a liquid helium tank. The experiment allows one to measure the performance of both cooler stages along with the performance of the leads. While the leads were powered we measured the voltage drops through the copper leads, through the HTS leads, through spliced to the feed-through, through the feed-through and through the low-temperature superconducting loop that connects one lead to the other. Measurements were made using the leads that were used in spectrometer magnet 1A and spectrometer magnet 2A. These are the same leads that were used for Superbend and Venus magnets at LBNL. The IL/A for these leads was 5.2 x 10{sup 6} m{sup -1}. The leads turned out to be too long. The same measurements were made using the leads that were installed in magnet 2B. The magnet 2B leads had an IL/A of 3.3 x 10{sup 6} A m{sup -1}. This report discusses the cooler performance and the measured electrical performance of the lead circuit that contains the copper leads and the superconducting leads. All of the HTS leads that were installed in magnet 2B were current tested using this apparatus.

  2. Thermal Stability of Acetohydroxamic Acid/Nitric Acid Solutions

    SciTech Connect (OSTI)

    Rudisill, T.S.

    2002-03-13

    The transmutation of transuranic actinides and long-lived fission products in spent commercial nuclear reactor fuel has been proposed as one element of the Advanced Accelerator Applications Program. Preparation of targets for irradiation in an accelerator-driven subcritical reactor would involve dissolution of the fuel and separation of uranium, technetium, and iodine from the transuranic actinides and other fission products. The UREX solvent extraction process is being developed to reject and isolate the transuranic actinides in the acid waste stream by scrubbing with acetohydroxamic acid (AHA). To ensure that a runaway reaction will not occur between nitric acid and AHA, an analogue of hydroxyl amine, thermal stability tests were performed to identify if any processing conditions could lead to a runaway reaction.

  3. High-temperature superconducting current leads

    SciTech Connect (OSTI)

    Niemann, R.C.

    1995-03-01

    Use of high-temperature superconductors (HTSs) for current leads to deliver power to devices at liquid helium temperature can reduce refrigeration requirements to values significantly below those achievable with conventional leads. HTS leads are now near commercial realization. Argonne National Laboratory (ANL) has developed a sinter-forge process to fabricate current leads from bismuth-based superconductors. The current-carrying capacity of these leads is five times better than that of HTS leads made by a conventional fabrication process. ANL along with Superconductivity, Inc., has developed a 1500 ampere current lead for an existing superconducting magnetic energy storage (SMES) device. With Babcock & Wilcox Company, Argonne is creating 16-kiloampere leads for use in a 0.5 MWh SMES. In a third project Argonne performed characterization testing of a existing, proprietary conduction-cooled lead being developed by Zer Res Corp.

  4. University Competition Leads to Geothermal Breakthroughs

    Broader source: Energy.gov [DOE]

    Learn how students are leading groundbreaking research to help expand the development of America's vast geothermal energy resources.

  5. Prabhat Steps In as DAS Group Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Prabhat Steps In as DAS Group Lead Prabhat Steps In as DAS Group Lead September 1, 2014 prabhat Prabhat has been named Group Lead of the Data and Analytics Services (DAS) Group at the Department of Energy's National Energy Research Scientific Computing Center (NERSC). The DAS group helps NERSC's users address data and analytics challenges arising from the increasing size and complexity of data from simulations and experiments. As the DAS Group Lead, Prabhat will play a key role in developing and

  6. Clean Lead Facility (CLF) Inventory System

    Energy Science and Technology Software Center (OSTI)

    1995-07-13

    The CLF Inventory System records shipments of clean or nonradioactive contaminated lead stored at the CLF. The Inventory System provides reports and inventory information to Facility operators. Annual, quarterly, monthly, and current inventory reports may be printed. Profile reports of each shipment of lead may also be printed for verification and documentation of lead transactions.

  7. Tracing the transport of anthropogenic lead in the atmosphere and in soils using isotopic ratios

    SciTech Connect (OSTI)

    Erel, Y.; Veron, A.; Halicz, L.

    1997-11-01

    The isotopic composition of lead in aerosols and soils in Israel is used to characterize the sources of anthropogenic lead in the region, to ascertain the isotopic composition of natural, rock-derived lead in specific areas, and to determine rates of anthropogenic lead migration in soils. The isotopic composition of lead currently emitted from cars in Israel ({sup 206}Pb/{sup 207}Pb = 1.115 {+-} 2) is controlled by alkyl-lead produced in France and Germany. In addition to petrol-lead, two more sources of anthropogenic lead can be detected in sampled aerosols; the first one has low concentrations of lead ({approximately} ng/m{sup 3}) and {sup 206}Pb/{sup 207}Pb {approximately} 1.157, and is most likely lead, emitted in Turkey, that traveled across the eastern Mediterranean basin; the second type of aerosols contains a mixture of lead emitted in several countries including Turkey, Greece, and Ukraine ({sup 206}Pb/{sup 207}Pb value of 1.155-1.160; [Pb] {approximately}20-30 ng/m{sup 3}). Anthropogenic lead is more accessible for acid leaching than natural lead, therefore, it is more labile in the soil. The isotopic composition of lead in the acid-leached fraction of near-road soil profiles records the history of alkyl-lead emission in the country. Based on changes in the isotopic composition of lead with soil depth, it is estimated that anthropogenic lead migrates into the soil at approximately 0.5 cm/y. A soil profile from a relatively remote area is less contaminated by anthropogenic lead and displays a different distribution of lead isotopic values with depth. The isotopic composition of lead suggests that natural lead in soils developed on carbonate bedrock is derived from clays, either from the rock-residue (the clay fraction in the carbonate bedrock), or from airborne clay, but not from lead released from the carbonate fraction in the rock. 44 refs., 6 figs., 2 tabs.

  8. Acid distribution in phosphoric acid fuel cells

    SciTech Connect (OSTI)

    Okae, I.; Seya, A.; Umemoto, M.

    1996-12-31

    Electrolyte acid distribution among each component of a cell is determined by capillary force when the cell is not in operation, but the distribution under the current load conditions had not been clear so far. Since the loss of electrolyte acid during operation is inevitable, it is necessary to store enough amount of acid in every cell. But it must be under the level of which the acid disturbs the diffusion of reactive gases. Accordingly to know the actual acid distribution during operation in a cell is very important. In this report, we carried out experiments to clarify the distribution using small single cells.

  9. Reproductive toxicity of low-level lead exposure in men

    SciTech Connect (OSTI)

    Telisman, Spomenka Colak, Bozo; Pizent, Alica; Jurasovic, Jasna; Cvitkovic, Petar

    2007-10-15

    Parameters of semen quality, seminal plasma indicators of secretory function of the prostate and seminal vesicles, sex hormones in serum, and biomarkers of lead, cadmium, copper, zinc, and selenium body burden were measured in 240 Croatian men 19-52 years of age. The subjects had no occupational exposure to metals and no known other reasons suspected of influencing male reproductive function or metal metabolism. After adjusting for age, smoking, alcohol, blood cadmium, and serum copper, zinc, and selenium by multiple regression, significant (P<0.05) associations of blood lead (BPb), {delta}-aminolevulinic acid dehydratase (ALAD), and/or erythrocyte protoporphyrin (EP) with reproductive parameters indicated a lead-related increase in immature sperm concentration, in percentages of pathologic sperm, wide sperm, round sperm, and short sperm, in serum levels of testosterone and estradiol, and a decrease in seminal plasma zinc and in serum prolactin. These reproductive effects were observed at low-level lead exposure (BPb median 49 {mu}g/L, range 11-149 {mu}g/L in the 240 subjects) common for general populations worldwide. The observed significant synergistic effect of BPb and blood cadmium on increasing serum testosterone, and additive effect of a decrease in serum selenium on increasing serum testosterone, may have implications on the initiation and development of prostate cancer because testosterone augments the progress of prostate cancer in its early stages.

  10. Apparatus and methods for purifying lead

    DOE Patents [OSTI]

    Tunison, Harmon M.

    2016-01-12

    Disclosed is an exemplary method of purifying lead which includes the steps of placing lead and a fluoride salt blend in a container; forming a first fluid of molten lead at a first temperature; forming a second fluid of the molten fluoride salt blend at a second temperature higher than the first temperature; mixing the first fluid and the second fluid together; separating the two fluids; solidifying the molten fluoride salt blend at a temperature above a melting point of the lead; and removing the molten lead from the container. In certain exemplary methods the molten lead is removed from the container by decanting. In still other exemplary methods the molten salt blend is a Lewis base fluoride eutectic salt blend, and in yet other exemplary methods the molten salt blend contains sodium fluoride, lithium fluoride, and potassium fluoride.

  11. David Skinner Named NERSC Strategic Partnerships Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    David Skinner Named NERSC Strategic Partnerships Lead David Skinner Named NERSC Strategic Partnerships Lead January 24, 2014 Contact: Linda Vu, +1 510 495 2402, lvu@lbl.gov XBD201102-00089.jpg David Skinner This month, the National Energy Research Scientific Computing Center (NERSC) created a new position-Strategic Partnerships Lead, to identify new science communities that can benefit from NERSC resources. David Skinner, former head of NERSC's Outreach Software and Programming Group (OSP), has

  12. Compatibility of PETN with lead azide

    SciTech Connect (OSTI)

    Hurd, R.; Fronabarger, J.W.; Johnson, R.; Fleming, W.

    1983-01-01

    The compatibility of PETN with lead azide at elevated temperatures has been investigated. Ramped and isothermal DSC methods were used to obtain energies of activation at temperatures above the melting point of PETN. Mixtures were found to show exothermic activity at lower temperatures than pure PETN. High Pressure Liquid Chromatography was used to follow the decomposition of PETN and PETN/lead azide mixtures at temperatures below the melting point. Reaction below 120/sup 0/C appeared minimal, while at higher temperatures, both PETN and PETN/lead azide mixtures showed degradation. A PETN/lead azide sample exploded at or near the melting point of PETN.

  13. Hazen Named Storage Systems Group Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hazen Named Storage Systems Group Lead Hazen Named Storage Systems Group Lead May 10, 2016 Damian Hazen Damian Hazen Damian Hazen, who has been with NERSC since 2001, has been named group lead for the Storage Systems Group. Hazen has been acting lead since last October, taking over for Jason Hick, who recently left NERSC to take a position at Los Alamos National Laboratory. During his time at NERSC, Hazen has worked primarily in the Storage Systems Group as an administrator and programmer for

  14. LEAD SUBSTITUTION AND ELIMINATION STUDY, PART II

    SciTech Connect (OSTI)

    T. MARTINEZ; M. COURNOYER

    2001-01-01

    Within the Nuclear Materials Technology Division of Los Alamos National Laboratory, lead is used as shielding for a variety of operations, including actinide chemistry, weapons production, radiochemistry, and analytical chemistry. In this study, waste minimization issues associated with replacing lead shielding with non-hazardous materials are addressed. These include institutional program available to support this effort, the hazards and accompanying controls grouped with lead shielding, operations that use lead bricks and how this effects the selection of the substitute. Life cycle management issues are also examined. As a final step, an approach to get buy-in from both technical and budget minded employees is presented.

  15. Property:LeadAgency | Open Energy Information

    Open Energy Info (EERE)

    Subproperties This property has the following 1 subproperty: R RAPIDRoadmap9-FD-k Pages using the property "LeadAgency" Showing 25 pages using this property. (previous...

  16. Facilities Electrician & Lead Electrician | Princeton Plasma...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    performing electrical work: Electrician10 years; and LEAD Electrician15 years of experience required 2. Thorough understanding of the National Electric Code. 3. Demonstrated ...

  17. Construction Branch Electrician & Lead Electrician | Princeton...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Construction Branch Electrician & Lead Electrician Department: Engineering Supervisor(s): ... devices, and assist with the construction and repair of facilities on the PPPL campus. ...

  18. Drop In Fuels: Where the Road Leads

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Algal Oil 8 Biomass-based Diesel: Biodiesel-ester Standalone Renewable Diesel ... 3 OC(CH 2 ) 7 CHCH(CH 2 ) 7 CH 3 O Biodiesel or Fatty Acid Methyl Ester (FAME) CH 3 ...

  19. Managing lead-based paint abatement wastes

    SciTech Connect (OSTI)

    Steele, N.L.C.

    1994-12-31

    Renovation, remodeling, demolition, and surface preparation for painting, in addition to specified lead abatement, are all activities that have the potential to produce hazardous wastes if a property was painted with lead-based paint. Lead-based paint was used on residential structures until 1978, when most residential uses were banned by the Consumer Products Safety Council. Prior to the 1950s, paints for residential uses may have contained up to 50% lead by weight. Today, commercial and military paints may still contain lead and can be used on non-residential structures. The lead content of residential paints is limited to 0.06% lead (by weight) in the dried film. This paper provides an overview of some of the information needed to properly manage lead-based paint abatement wastes. The issues covered in this paper include waste classification, generator status, treatment, and land disposal restrictions. The author assumes that the reader is familiar with the provision of the Health and Safety Code and the California Code of Regulations that pertain to generation and management of hazardous wastes. Citations provided herein do not constitute an exhaustive list of all the regulations with which a generator of hazardous waste must comply.

  20. Distributed electrical leads for thermionic converter

    DOE Patents [OSTI]

    Fitzpatrick, Gary O.; Britt, Edward J.

    1979-01-01

    In a thermionic converter, means are provided for coupling an electrical lead to at least one of the electrodes thereof. The means include a bus bar and a plurality of distributed leads coupled to the bus bar each of which penetrates through one electrode and are then coupled to the other electrode of the converter in spaced apart relation.

  1. Fan-fold shielded electrical leads

    DOE Patents [OSTI]

    Rohatgi, Rajeev R.; Cowan, Thomas E.

    1996-01-01

    Fan-folded electrical leads made from copper cladded Kapton, for example, with the copper cladding on one side serving as a ground plane and the copper cladding on the other side being etched to form the leads. The Kapton is fan folded with the leads located at the bottom of the fan-folds. Electrical connections are made by partially opening the folds of the fan and soldering, for example, the connections directly to the ground plane and/or the lead. The fan folded arrangement produces a number of advantages, such as electrically shielding the leads from the environment, is totally non-magnetic, and has a very low thermal conductivity, while being easy to fabricate.

  2. Fan-fold shielded electrical leads

    DOE Patents [OSTI]

    Rohatgi, R.R.; Cowan, T.E.

    1996-06-11

    Disclosed are fan-folded electrical leads made from copper cladded Kapton, for example, with the copper cladding on one side serving as a ground plane and the copper cladding on the other side being etched to form the leads. The Kapton is fan folded with the leads located at the bottom of the fan-folds. Electrical connections are made by partially opening the folds of the fan and soldering, for example, the connections directly to the ground plane and/or the lead. The fan folded arrangement produces a number of advantages, such as electrically shielding the leads from the environment, is totally non-magnetic, and has a very low thermal conductivity, while being easy to fabricate. 3 figs.

  3. Cryogenic Current Lead Analysis Model Program

    Energy Science and Technology Software Center (OSTI)

    1992-01-01

    CCLAMP was developed to provide a tool for tha analysis of superconducting or normal current leads used to supply electricity from a warm interface (usually room temperature) to a device at cryogenic temperatures. It determines the heat leak to the cryogenic connection and the mass flow of the cryogen (typically helium) for the lead and installation modelled. It may be used to thermally optimize a lead design for a particular application. The user provides relevantmore » geometry details to model the electrical (length, diameter, superconducting length) and heat exchanger design of the lead (heat transfer coefficient, heat transfer area). It has a transient analysis capability so that lead transients such as cool down, current ramping, flow disruptions, and control simulations can be performed.« less

  4. Lead Coolant Test Facility Development Workshop

    SciTech Connect (OSTI)

    Paul A. Demkowicz

    2005-06-01

    A workshop was held at the Idaho National Laboratory on May 25, 2005, to discuss the development of a next generation lead or lead-alloy coolant test facility. Attendees included representatives from the Generation IV lead-cooled fast reactor (LFR) program, Advanced Fuel Cycle Initiative, and several universities. Several participants gave presentations on coolant technology, existing experimental facilities for lead and lead-alloy research, the current LFR design concept, and a design by Argonne National Laboratory for an integral heavy liquid metal test facility. Discussions were focused on the critical research and development requirements for deployment of an LFR demonstration test reactor, the experimental scope of the proposed coolant test facility, a review of the Argonne National Laboratory test facility design, and a brief assessment of the necessary path forward and schedule for the initial stages of this development project. This report provides a summary of the presentations and roundtable discussions.

  5. Method for measuring lead concentrations in blood

    DOE Patents [OSTI]

    Nogar, Nicholas S.

    2001-01-01

    Method for measuring lead concentrations in blood. The present invention includes the use of resonant laser ablation to analyze .ltoreq.1 .mu.L (or equivalent mass) samples of blood for lead content. A typical finger prick, for example, yields about 10 .mu.L. Solid samples may also readily be analyzed by resonant laser ablation. The sample is placed on a lead-free, electrically conducting substrate and irradiated with a single, focused laser beam which simultaneously vaporizes, atomizes, and resonantly ionizes an analyte of interest in a sample. The ions are then sorted, collected and detected using a mass spectrometer.

  6. The risk of lead toxicity in homes with lead paint hazard

    SciTech Connect (OSTI)

    Schwartz, J.; Levin, R. )

    1991-02-01

    While lead paint has long been known to be a major source of lead poisoning, only a few small epidemiologic studies have attempted to assess directly the relative risk of lead poisoning due to the presence of lead paint. Using data from over 200,000 screening tests of children in the city of Chicago performed between 1976 and 1980, the relative risks can be quantified for children living in a major urban area. Lead paint was found to be a significant predictor of the probability of a child having lead toxicity. As expected, the reduction in leaded gasoline sales during the period reduced mean blood lead levels and increased the percentage of lead toxic children whose toxicity could be attributed to paint lead. Poisson regression models indicated that with the elimination of leaded gasoline, the relative risk of lead toxicity given lead paint exposure was 5.70 (95% CI, 4.13-7.86) during the winter and fall. The relative risk rose to 12.81 (95% CI, 7.33-22.4) in the spring and 15.8 (95% CI, 8.90-28.1) in the summer, probably due to increased exposure to window wells.

  7. Lead Hero Limited | Open Energy Information

    Open Energy Info (EERE)

    Hero Limited Jump to: navigation, search Name: Lead Hero Limited Place: China Product: China-based company that holds a 100% interest in XiAn Lv Jing and a 15.05% interest in...

  8. INEEL Lead Recycling in a Moratorium Environment

    SciTech Connect (OSTI)

    Kooda, K. E.; Galloway, K.; McCray, C. W.; Aitken, D. W.

    2003-02-26

    Since 1999, the Idaho National Engineering and Environmental Laboratory (INEEL) Lead Project successfully recycled over 700,000 pounds of excess INEEL lead to the private sector. On February 14, 2000, the Secretary of Energy, Bill Richardson, formalized the January 12, 2000, moratorium on recycling radioactive scrap metal that prevented the unrestricted release of recycled scrap metals to the private sector. This moratorium created significant problems for the INEEL lead recycling program and associated plans; however, through the cooperative efforts of the INEEL and Idaho State University as well as innovative planning and creative thinking the recycling issues were resolved. This collaboration has recycled over 160,000 pounds of excess lead to Idaho State University with a cost savings of over $.5M.

  9. INEEL Lead Recycling in a Moratorium Environment

    SciTech Connect (OSTI)

    Kooda, Kevin Evan; Mc Cray, Casey William; Aitken, Darren William; Galloway, Kelly

    2003-02-01

    Since 1999, the Idaho National Engineering and Environmental Laboratory (INEEL) Lead Project successfully recycled over 700,000 pounds of excess INEEL lead to the private sector. On February 14, 2000, the Secretary of Energy, Bill Richardson, formalized the January 12, 2000, moratorium on recycling radioactive scrap metal that prevented the unrestricted release of recycled scrap metals to the private sector. This moratorium created significant problems for the INEEL lead recycling program and associated plans; however, through the cooperative efforts of the INEEL and Idaho State University as well as innovative planning and creative thinking the recycling issues were resolved. This collaboration has recycled over 160,000 pounds of excess lead to Idaho State University with a cost savings of over $.5M.

  10. Replica amplification of nucleic acid arrays

    DOE Patents [OSTI]

    Church, George M.; Mitra, Robi D.

    2010-08-31

    Disclosed are improved methods of making and using immobilized arrays of nucleic acids, particularly methods for producing replicas of such arrays. Included are methods for producing high density arrays of nucleic acids and replicas of such arrays, as well as methods for preserving the resolution of arrays through rounds of replication. Also included are methods which take advantage of the availability of replicas of arrays for increased sensitivity in detection of sequences on arrays. Improved methods of sequencing nucleic acids immobilized on arrays utilizing single copies of arrays and methods taking further advantage of the availability of replicas of arrays are disclosed. The improvements lead to higher fidelity and longer read lengths of sequences immobilized on arrays. Methods are also disclosed which improve the efficiency of multiplex PCR using arrays of immobilized nucleic acids.

  11. Corrosion by liquid lead and lead-bismuth: experimental results review and analysis

    SciTech Connect (OSTI)

    Zhang, Jinsuo

    2008-01-01

    Liquid metal technologies for liquid lead and lead-bismuth alloy are under wide investigation and development for advanced nuclear energy systems and waste transmutation systems. Material corrosion is one of the main issues studied a lot recently in the development of the liquid metal technology. This study reviews corrosion by liquid lead and lead bismuth, including the corrosion mechanisms, corrosion inhibitor and the formation of the protective oxide layer. The available experimental data are analyzed by using a corrosion model in which the oxidation and scale removal are coupled. Based on the model, long-term behaviors of steels in liquid lead and lead-bismuth are predictable. This report provides information for the selection of structural materials for typical nuclear reactor coolant systems when selecting liquid lead or lead bismuth as heat transfer media.

  12. Measurement of the production of neighbouring jets in lead-lead...

    Office of Scientific and Technical Information (OSTI)

    Measurement of the production of neighbouring jets in lead-lead collisions at sNN2.76 TeV with the ATLAS detector Citation Details In-Document Search Title: Measurement of the...

  13. NERSC seeks Computational Systems Group Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    seeks Computational Systems Group Lead NERSC seeks Computational Systems Group Lead January 6, 2011 by Katie Antypas Note: This position is now closed. The Computational Systems Group provides production support and advanced development for the supercomputer systems at NERSC. Manage the Computational Systems Group (CSG) which provides production support and advanced development for the supercomputer systems at NERSC (National Energy Research Scientific Computing Center). These systems, which

  14. Nick Wright Named Advanced Technologies Group Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nick Wright Named Advanced Technologies Group Lead Nick Wright Named Advanced Technologies Group Lead February 4, 2013 Nick Nick Wright has been named head of the National Energy Research Scientific Computing Center's (NERSC) Advanced Technologies Group (ATG), which focuses on understanding the requirements of current and emerging applications to make choices in hardware design and programming models that best serve the science needs of NERSC users. ATG specializes in benchmarking, system

  15. Zerkle to lead LANL's Information Technology organization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Zerkle to lead Information Technology organization Zerkle to lead LANL's Information Technology organization Information Technology is responsible for departmental computing, software and software applications, and computing networks and infrastructure. March 14, 2011 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to

  16. Fatty acid analogs

    DOE Patents [OSTI]

    Elmaleh, David R.; Livni, Eli

    1985-01-01

    In one aspect, a radioactively labeled analog of a fatty acid which is capable of being taken up by mammalian tissue and which exhibits an in vivo beta-oxidation rate below that with a corresponding radioactively labeled fatty acid.

  17. Mixed Acid Oxidation

    SciTech Connect (OSTI)

    Pierce, R.A.

    1999-10-26

    Several non-thermal processes have been developed to destroy organic waste compounds using chemicals with high oxidation potentials. These efforts have focused on developing technologies that work at low temperatures, relative to incineration, to overcome many of the regulatory issues associated with obtaining permits for waste incinerators. One such technique with great flexibility is mixed acid oxidation. Mixed acid oxidation, developed at the Savannah River Site, uses a mixture of an oxidant (nitric acid) and a carrier acid (phosphoric acid). The carrier acid acts as a non-volatile holding medium for the somewhat volatile oxidant. The combination of acids allows appreciable amounts of the concentrated oxidant to remain in the carrier acid well above the oxidant''s normal boiling point.

  18. PRODUCTION OF TRIFLUOROACETIC ACID

    DOE Patents [OSTI]

    Haworth, W.N.; Stacey, M.

    1949-07-19

    A method is given for the production of improved yields of trifluoroacetic acid. The compound is prepared by oxidizing m-aminobenzotrifluoride with an alkali metal or alkaline earth metal permanganate at a temperature in the range of 80 deg C to 100 deg C while dissolved ln a mixture of water with glacial acetic acid and/or trifluoroacetic acid. Preferably a mixture of water and trifluoroacetic acid ls used as the solvent.

  19. Plant fatty acid hydroxylases

    DOE Patents [OSTI]

    Somerville, Chris; Broun, Pierre; van de Loo, Frank

    2001-01-01

    This invention relates to plant fatty acyl hydroxylases. Methods to use conserved amino acid or nucleotide sequences to obtain plant fatty acyl hydroxylases are described. Also described is the use of cDNA clones encoding a plant hydroxylase to produce a family of hydroxylated fatty acids in transgenic plants. In addition, the use of genes encoding fatty acid hydroxylases or desaturases to alter the level of lipid fatty acid unsaturation in transgenic plants is described.

  20. Cleavage of nucleic acids

    DOE Patents [OSTI]

    Prudent, James R.; Hall, Jeff G.; Lyamichev, Victor I.; Brow, Mary Ann D.; Dahlberg, James E.

    2000-01-01

    The present invention relates to means for the detection and characterization of nucleic acid sequences, as well as variations in nucleic acid sequences. The present invention also relates to methods for forming a nucleic acid cleavage structure on a target sequence and cleaving the nucleic acid cleavage structure in a site-specific manner. The structure-specific nuclease activity of a variety of enzymes is used to cleave the target-dependent cleavage structure, thereby indicating the presence of specific nucleic acid sequences or specific variations thereof.

  1. Cleavage of nucleic acids

    DOE Patents [OSTI]

    Prudent, James R.; Hall, Jeff G.; Lyamichev, Victor L.; Brow, Mary Ann D.; Dahlberg, James E.

    2007-12-11

    The present invention relates to means for the detection and characterization of nucleic acid sequences, as well as variations in nucleic acid sequences. The present invention also relates to methods for forming a nucleic acid cleavage structure on a target sequence and cleaving the nucleic acid cleavage structure in a site-specific manner. The structure-specific nuclease activity of a variety of enzymes is used to cleave the target-dependent cleavage structure, thereby indicating the presence of specific nucleic acid sequences or specific variations thereof.

  2. Nucleic acid detection assays

    DOE Patents [OSTI]

    Prudent, James R.; Hall, Jeff G.; Lyamichev, Victor I.; Brow, Mary Ann; Dahlberg, James E.

    2005-04-05

    The present invention relates to means for the detection and characterization of nucleic acid sequences, as well as variations in nucleic acid sequences. The present invention also relates to methods for forming a nucleic acid cleavage structure on a target sequence and cleaving the nucleic acid cleavage structure in a site-specific manner. The structure-specific nuclease activity of a variety of enzymes is used to cleave the target-dependent cleavage structure, thereby indicating the presence of specific nucleic acid sequences or specific variations thereof.

  3. Nucleic acid detection compositions

    DOE Patents [OSTI]

    Prudent, James R.; Hall, Jeff G.; Lyamichev, Victor I.; Brow, Mary Ann; Dahlberg, James L.

    2008-08-05

    The present invention relates to means for the detection and characterization of nucleic acid sequences, as well as variations in nucleic acid sequences. The present invention also relates to methods for forming a nucleic acid cleavage structure on a target sequence and cleaving the nucleic acid cleavage structure in a site-specific manner. The structure-specific nuclease activity of a variety of enzymes is used to cleave the target-dependent cleavage structure, thereby indicating the presence of specific nucleic acid sequences or specific variations thereof.

  4. Cleavage of nucleic acids

    DOE Patents [OSTI]

    Prudent, James R.; Hall, Jeff G.; Lyamichev, Victor I.; Brow; Mary Ann D.; Dahlberg, James E.

    2010-11-09

    The present invention relates to means for the detection and characterization of nucleic acid sequences, as well as variations in nucleic acid sequences. The present invention also relates to methods for forming a nucleic acid cleavage structure on a target sequence and cleaving the nucleic acid cleavage structure in a site-specific manner. The structure-specific nuclease activity of a variety of enzymes is used to cleave the target-dependent cleavage structure, thereby indicating the presence of specific nucleic acid sequences or specific variations thereof.

  5. A Study of Lead-Acid Battery Efficiency Near Top-of-Charge

    Office of Scientific and Technical Information (OSTI)

    details of charge efficiency versus state of charge for the specific battery under test. ... details of charge efficiency versus state of charge for the specific battery under test. ...

  6. A study of lead-acid battery efficiency near top-of-charge and...

    Office of Scientific and Technical Information (OSTI)

    Resource Relation: Conference: 25. photovoltaic solar energy conference, Washington, DC ... Country of Publication: United States Language: English Subject: 14 SOLAR ENERGY; 25 ...

  7. DOE-HDBK-1084-95; Primer on Lead-Acid Storage Batteries

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of work sponsored by an agency of the United States Government. ... Effects of Discharge Rate and Temperature on Capacity and ... dangerous and can cause serious illness and death. ...

  8. Nucleic acid detection kits

    DOE Patents [OSTI]

    Hall, Jeff G.; Lyamichev, Victor I.; Mast, Andrea L.; Brow, Mary Ann; Kwiatkowski, Robert W.; Vavra, Stephanie H.

    2005-03-29

    The present invention relates to means for the detection and characterization of nucleic acid sequences, as well as variations in nucleic acid sequences. The present invention also relates to methods for forming a nucleic acid cleavage structure on a target sequence and cleaving the nucleic acid cleavage structure in a site-specific manner. The structure-specific nuclease activity of a variety of enzymes is used to cleave the target-dependent cleavage structure, thereby indicating the presence of specific nucleic acid sequences or specific variations thereof. The present invention further relates to methods and devices for the separation of nucleic acid molecules based on charge. The present invention also provides methods for the detection of non-target cleavage products via the formation of a complete and activated protein binding region. The invention further provides sensitive and specific methods for the detection of nucleic acid from various viruses in a sample.

  9. Lead-induced stress corrosion cracking of Alloy 600 and 690 in high temperature water

    SciTech Connect (OSTI)

    Sakai, T.; Senjuh, T.; Aoki, K.; Shigemitsu, T.; Kishi, Y.

    1992-12-31

    Lead is one of the potential contributing impurities to the degradation of PWR steam generator tubing. Recent laboratory testing has shown that lead is a corrosive material for Alloy 600 steam generator tubing. However, it is still unknown how lead influences the corrosion of steam generator tubing, including the effect of lead concentration, solution pH, stress level and material characteristics. In this study, two kinds of experiments were performed. One was to investigate the thin film characteristic and selectively dissolved base metal elements of Alloy 600MA in high temperature solutions of different lead concentrations and pH. The other investigated the dependency of degradation of Alloy 600MA and Alloy 690TT on lead concentration and stress level in mild acidic environment, at 340{degrees}C for 2500 hrs. It was firstly demonstrated that lead-enhanced selective dissolution of nickel from alloy base metal, as a result of electrochemical reaction between lead and nickel, might cause the initiation and propagation of corrosion. Secondly, we showed that Alloy 690TT, generally very corrosion resistant material, also suffered from Pb-induced corrosion. The difference of the lead-induced stress corrosion morphology of Alloy 600MA and Alloy 690TT was also clarified.

  10. Properly engineer lead paint removal projects

    SciTech Connect (OSTI)

    Kaelin, A.B.

    1996-01-01

    Deciding how to mitigate the hazards during lead paint removal is complex and requires consideration of many variables. Assessment of public health risk, environmental impact, and emissions potential of the operations must be considered. Additionally, the removal technique, containment system, and monitoring criteria must be developed. This article presents an integrated approach to identifying lead hazards, assessing risks to workers, the environment, and the public, developing the appropriate maintenance strategy, and selecting paint removal and containment systems. Also considered are guidelines for selecting a third party to design the overall project. This approach is based on a decision path that provides criteria for project assessment in an orderly fashion. The design of lead paint management projects in industrial applications requires consideration of the variables shown in the decision path.

  11. Protocol, Qualification Standard for the Site Lead Program -...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Qualification Standard for the Site Lead Program - May 2011 Protocol, Qualification Standard for the Site Lead Program - May 2011 May 2011 Qualification Standard for the Site Lead...

  12. L I NATIONAL' LEAD COMPANY OF OHIO

    Office of Legacy Management (LM)

    L I NATIONAL' LEAD COMPANY OF OHIO tJw HEALTH AND SAFETY DI"ISION - ANALITICIL DEPT. ANALYTICAL DATA SHEET _I . . NATIONAL LEAD COMPANY O F OHIO HEALTH AND SAFETY DIY1SION - ANALYTICAL DEPT. ANALYTICAL DATA SHEET NATIONA-i LEn' D COMPANY OF OHIO HEALTH AND SAFETY Dl"lSlDN - m4ALITICAL DEPT. ANALYTICAL DATA SHEET NO. I DlSTRlBUTlON OF COPIES I I A,w,lytlc.al Loboratorr (RBCORD COPI) 2 Induswlol Hvalen. B Rodhtlon Dept. 3 1 Water Trsotmmt Plant c=.z w&w hnp,., Only, - . _. NATIONAL

  13. Process for the preparation of lactic acid and glyceric acid

    DOE Patents [OSTI]

    Jackson, James E [Haslett, MI; Miller, Dennis J [Okemos, MI; Marincean, Simona [Dewitt, MI

    2008-12-02

    Hexose and pentose monosaccharides are degraded to lactic acid and glyceric acid in an aqueous solution in the presence of an excess of a strongly anionic exchange resin, such as AMBERLITE IRN78 and AMBERLITE IRA400. The glyceric acid and lactic acid can be separated from the aqueous solution. Lactic acid and glyceric acid are staple articles of commerce.

  14. Coordination chemistry of two heavy metals: I, Ligand preferences in lead(II) complexation, toward the development of therapeutic agents for lead poisoning: II, Plutonium solubility and speciation relevant to the environment

    SciTech Connect (OSTI)

    Neu, M.P.

    1993-11-01

    The coordination chemistry and solution behavior of the toxic ions lead(II) and plutonium(IV, V, VI) have been investigated. The ligand pK{sub a}s and ligand-lead(II) stability constants of one hydroxamic acid and four thiohydroaxamic acids were determined. Solution thermodynamic results indicate that thiohydroxamic acids are more acidic and slightly better lead chelators than hydroxamates, e.g., N-methylthioaceto-hydroxamic acid, pK{sub a} = 5.94, log{beta}{sub 120} = 10.92; acetohydroxamic acid, pK{sub a} = 9.34, log{beta}{sub l20} = 9.52. The syntheses of lead complexes of two bulky hydroxamate ligands are presented. The X-ray crystal structures show the lead hydroxamates are di-bridged dimers with irregular five-coordinate geometry about the metal atom and a stereochemically active lone pair of electrons. Molecular orbital calculations of a lead hydroxamate and a highly symmetric pseudo octahedral lead complex were performed. The thermodynamic stability of plutonium(IV) complexes of the siderophore, desferrioxamine B (DFO), and two octadentate derivatives of DFO were investigated using competition spectrophotometric titrations. The stability constant measured for the plutonium(IV) complex of DFO-methylterephthalamide is log{beta}{sub 110} = 41.7. The solubility limited speciation of {sup 242}Pu as a function of time in near neutral carbonate solution was measured. Individual solutions of plutonium in a single oxidation state were added to individual solutions at pH = 6.0, T = 30.0, 1.93 mM dissolved carbonate, and sampled over intervals up to 150 days. Plutonium solubility was measured, and speciation was investigated using laser photoacoustic spectroscopy and chemical methods.

  15. Microorganisms for producing organic acids

    SciTech Connect (OSTI)

    Pfleger, Brian Frederick; Begemann, Matthew Brett

    2014-09-30

    Organic acid-producing microorganisms and methods of using same. The organic acid-producing microorganisms comprise modifications that reduce or ablate AcsA activity or AcsA homolog activity. The modifications increase tolerance of the microorganisms to such organic acids as 3-hydroxypropionic acid, acrylic acid, propionic acid, lactic acid, and others. Further modifications to the microorganisms increase production of such organic acids as 3-hydroxypropionic acid, lactate, and others. Methods of producing such organic acids as 3-hydroxypropionic acid, lactate, and others with the modified microorganisms are provided. Methods of using acsA or homologs thereof as counter-selectable markers are also provided.

  16. Worker lead exposures during renovation of homes with lead-based paint

    SciTech Connect (OSTI)

    Sussell, A.; Gittleman, J.; Singal, M.

    1998-11-01

    The authors evaluated lead exposures among full-time home renovators and part-time volunteers working primarily in pre-1960 homes with lead-based paint. Potentially hazardous lead exposures were measured during two tasks: exterior dry scraping and wet scraping. Maximum exposures were 120 and 63 {micro}g/m{sup 3}, respectively. Exposures during other tasks, including general repair, weatherization, exterior scraping/painting, window replacement, demolition, and plumbing, were low, as were all 13 full-shift personal exposures. Blood lead levels for full-time workers ranged up to 17.5 {micro}g/dl, with a GM of 5.2 {micro}g/dl; the GM for volunteers was 3.2 {micro}g/dl. All of the paint samples collected from work surfaces had detectable amounts of lead, with 65% of the work surfaces tested having an average lead concentration of >0.5%.

  17. Lead-203 as a label for radioimaging

    DOE Patents [OSTI]

    Srivastava, Suresh C.; Meinken, George E.

    1990-02-06

    A radiopharmaceutical composition comprising a radioactive isotope of lead (Pb-203) in combination with a pharmaceutical or an antibody or antibody fragment and a bifunctional chelating agent. These compositions are especially useful in the imaging and diagnosis of tumors and tumor metastases.

  18. Archaeological Lead Findings in the Ukraine

    SciTech Connect (OSTI)

    Danevich, F. A.; Kobychev, V. V.; Kropivyansky, B. N.; Mokina, V. M.; Nagorny, S. S.; Nikolaiko, A. S.; Poda, D. V.; Tretyak, V. I.; Kim, S. K.; Kim, H. J.; Kostezh, A. B.; Laubenstein, M.; Nisi, S.; Voronov, S. A.

    2007-03-28

    In June-August 2006 an expedition with the aim to look for low-radioactive archaeological lead at the bottom of the Black Sea, near the Crimean peninsula (Ukraine) was organised by a Korean-Ukrainian collaboration. The first samples with {approx}0.2 tons of total mass were found at a depth of 28 m among the relics of an ancient Greek ship. Their age has been dated to the first century B.C. This lead was used as ballast in the keel of the ship. The element composition of the samples was measured by means of X-ray fluorescence and ICP-MS analyses. The first preliminary limits on the 210Pb contamination of the samples are less than a few hundreds mBq/kg. The measurements were performed using gamma spectroscopy with HPGe-detectors and alpha spectroscopy with commercial {alpha}-detectors. Measurements of 40K, Th/U in the lead samples were undertaken in Kiev and in the underground laboratories of the Laboratori Nazionali del Gran Sasso (LNGS, Italy). If it was found to be radio-clean this lead could be used as high efficiency shield for ultra low-level detectors, and as raw material for growing radio-pure scintillation crystals such as PbMoO4 or PbWO4 for the search for rare processes.

  19. Hanford Leads the Way for Greener Classrooms

    Broader source: Energy.gov [DOE]

    EM’s Richland Operations Office and contractor Mission Support Alliance (MSA) are leading the way to greener classrooms by developing a totally paperless class at the HAMMER Federal Training Facility at the Hanford site. MSA manages HAMMER on behalf of EM.

  20. Lead-203 as a label for radioimaging

    DOE Patents [OSTI]

    Srivastava, Suresh C.; Meinken, George E.

    1990-01-01

    A radiopharmaceutical composition comprising a radioactive isotope of lead (Pb-203) in combination with a pharmaceutical or an antibody or antibody fragment and a bifunctional chelating agent. These compositions are especially useful in the imaging and diagnosis of tumors and tumor metastases.

  1. Recovery of organic acids

    DOE Patents [OSTI]

    Verser, Dan W. (Menlo Park, CA); Eggeman, Timothy J. (Lakewood, CO)

    2011-11-01

    A method is disclosed for the recovery of an organic acid from a dilute salt solution in which the cation of the salt forms an insoluble carbonate salt. A tertiary amine and CO.sub.2 are introduced to the solution to form the insoluble carbonate salt and a complex between the acid and an amine. A water immiscible solvent, such as an alcohol, is added to extract the acid/amine complex from the dilute salt solution to a reaction phase. The reaction phase is continuously dried and a product between the acid and the solvent, such as an ester, is formed.

  2. Reversible Acid Gas Capture

    ScienceCinema (OSTI)

    Dave Heldebrant

    2012-12-31

    Pacific Northwest National Laboratory scientist David Heldebrant demonstrates how a new process called reversible acid gas capture works to pull carbon dioxide out of power plant emissions.

  3. Recovery of organic acids

    DOE Patents [OSTI]

    Verser, Dan W. (Golden, CO); Eggeman, Timothy J. (Lakewood, CO)

    2009-10-13

    A method is disclosed for the recovery of an organic acid from a dilute salt solution in which the cation of the salt forms an insoluble carbonate salt. A tertiary amine and CO.sub.2 are introduced to the solution to form the insoluble carbonate salt and a complex between the acid and an amine. A water immiscible solvent, such as an alcohol, is added to extract the acid/amine complex from the dilute salt solution to a reaction phase. The reaction phase is continuously dried and a product between the acid and the solvent, such as an ester, is formed.

  4. Lead magnesium niobate actuator for micropositioning

    DOE Patents [OSTI]

    Swift, C.D.; Bergum, J.W.

    1994-10-25

    An improved lead magnesium niobate actuator is disclosed comprising a cylindrical lead magnesium niobate crystal stack mounted in a cylindrical casing wherein a bias means, such as one or more belleville washers, is located between one end of the crystal stack and a partially closed end of the casing; and adjustment means are provided which bear against the opposite end of the crystal stack, whereby an adjustable compressive force is constantly applied against the crystal stack, whether the crystal stack is actuated in an extended position, or is in an unactuated contracted position. In a preferred embodiment, cooling ports are provided for the circulation of coolant in the actuator to cool the crystal stack, and provision is made for removal and replacement of the crystal stack without disconnecting the actuator from the external device being actuated. 3 figs.

  5. Lead magnesium niobate actuator for micropositioning

    SciTech Connect (OSTI)

    Swift, Charles D.; Bergum, John W.

    1994-01-01

    An improved lead magnesium niobate actuator is disclosed comprising a cylindrical lead magnesium niobate crystal stack mounted in a cylindrical casing wherein a bias means, such as one or more belleville washers, is located between one end of the crystal stack and a partially closed end of the casing; and adjustment means are provided which bear against the opposite end of the crystal stack, whereby an adjustable compressive force is constantly applied against the crystal stack, whether the crystal stack is actuated in an extended position, or is in an unactuated contracted position. In a preferred embodiment, cooling ports are provided for the circulation of coolant in the actuator to cool the crystal stack, and provision is made for removal and replacement of the crystal stack without disconnecting the actuator from the external device being actuated.

  6. Leading By Example | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    By Example Leading By Example November 3, 2011 - 3:08pm Addthis New cool roofs installed on the Energy Department’s headquarters building in Washington DC in November, 2010. | Image credit Quentin Kruger, Energy Department New cool roofs installed on the Energy Department's headquarters building in Washington DC in November, 2010. | Image credit Quentin Kruger, Energy Department Brian Costlow Director, Office of Administration Brian Costlow has won several awards for his work recently,

  7. Leading manufacturers in the Better Buildings

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Leading manufacturers in the Better Buildings, Better Plants Program are taking on bold commitments to improve energy efficiency across their operations. Building on President Obama's Better Buildings Initiative and the Administration's broader efforts to double energy productivity by 2030, the U.S. Department of Energy (DOE) works with manufacturers to set corporate-wide energy reduction goals, improve energy management, and track and report their progress. The industrial sector accounts for

  8. Fermilab | Science | Particle Accelerators | Leading Accelerator Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Leading Accelerator Technology photo From blueprint to construction, Fermilab scientists and engineers develop particle accelerators to produce beams to take particle physics to the next level, collaborating with scientists and laboratories around the world to help build these complex machines. Researchers build accelerators to be efficient and robust along every step of the particle beam's path, from the time it's born to its termination on target. The machines themselves must be efficient,

  9. Asset Recovery of Hazardous Materials Beneficial Reuse of Radiologically Encumbered Lead Stocks ''Getting the Lead Out''

    SciTech Connect (OSTI)

    LLOYD, E.R.

    2003-01-23

    Underutilized and surplus lead stocks and leaded components are a common legacy environmental problem across much of the Department of Energy (DOE) Complex. While seeking to dispose of these items through its Environmental Management Program, DOE operational programs continue to pursue contemporary mission requirements such as managing and/or storing radioactive isotopes that require lead materials for shielding. This paradox was identified in late 1999 when DOES policies for managing scrap metal were assessed. In January 2000, the Secretary of Energy directed the National Center of Excellence for Materials Recycle (NMR) to develop and implement a comprehensive lead reuse program for all of DOE. Fluor Hanford, contractor for DOE Richland Operations, subsequently contacted NMR to pilot lead reclamation and reuse at the Hanford Site, This relationship resulted in the development of a beneficial reuse pathway for lead reclaimed from spent fuel transport railcars being stored at Hanford. The 1.3 million pounds of lead in the railcars is considered radiologically encumbered due to its prior use. Further, the material was considered a mixed Resource Conservation and Recovery Act (RCRA) low-level radioactive waste that would require expensive storage or macro encapsulation to meet land disposal restrictions prior to burial. Working closely with Flour Hanford and the Office of Air, Water, and Radiation (EH-412), NMR developed a directed reuse pathway for this and other radiologically encumbered lead When derived supplemental release limits were used, the lead recovered from these railcars became eligible for reuse in shielding products to support DOE and commercial nuclear industry operations. Using this disposition pathway has saved Hanford one third of the cost of disposing of the lead and the cost of acquiring additional lead for nuclear shielding applications. Furthermore, the environmental costs associated with mining and producing new lead for shielding products and

  10. Mutant fatty acid desaturase

    DOE Patents [OSTI]

    Shanklin, John; Cahoon, Edgar B.

    2004-02-03

    The present invention relates to a method for producing mutants of a fatty acid desaturase having a substantially increased activity towards fatty acid substrates with chains containing fewer than 18 carbons relative to an unmutagenized precursor desaturase having an 18 carbon atom chain length substrate specificity. The method involves inducing one or more mutations in the nucleic acid sequence encoding the precursor desaturase, transforming the mutated sequence into an unsaturated fatty acid auxotroph cell such as MH13 E. coli, culturing the cells in the absence of supplemental unsaturated fatty acids, thereby selecting for recipient cells which have received and which express a mutant fatty acid desaturase with an elevated specificity for fatty acid substrates having chain lengths of less than 18 carbon atoms. A variety of mutants having 16 or fewer carbon atom chain length substrate specificities are produced by this method. Mutant desaturases produced by this method can be introduced via expression vectors into prokaryotic and eukaryotic cells and can also be used in the production of transgenic plants which may be used to produce specific fatty acid products.

  11. Comparison of advanced battery technologies for electric vehicles

    SciTech Connect (OSTI)

    Dickinson, B.E.; Lalk, T.R.; Swan, D.H.

    1993-12-31

    Battery technologies of different chemistries, manufacture and geometry were evaluated as candidates for use in Electric Vehicles (EV). The candidate batteries that were evaluated include four single cell and seven multi-cell modules representing four technologies: Lead-Acid, Nickel-Cadmium, Nickel-Metal Hydride and Zinc-Bromide. A standard set of testing procedures for electric vehicle batteries, based on industry accepted testing procedures, and any tests which were specific to individual battery types were used in the evaluations. The batteries were evaluated by conducting performance tests, and by subjecting them to cyclical loading, using a computer controlled charge--discharge cycler, to simulate typical EV driving cycles. Criteria for comparison of batteries were: performance, projected vehicle range, cost, and applicability to various types of EVs. The four battery technologies have individual strengths and weaknesses and each is suited to fill a particular application. None of the batteries tested can fill every EV application.

  12. Novel lead-iron phosphate glass

    DOE Patents [OSTI]

    Boatner, Lynn A.; Sales, Brian C.

    1989-01-01

    The invention described and claimed in the specification relates to the discovery that effective addition of Fe.sub.2 O.sub.3 to a lead phosphate glass results in a glass having enhanced chemical durability and physical stability, and consists essentially of the glass resulting from melting a mixture consisting essentially of, in weight percent, 40-66 percent PbO, 30-55 percent P.sub.2 O.sub.5 and an effective concentration up to 12 percent Fe.sub.2 O.sub.3.

  13. Novel lead-iron phosphate glass

    DOE Patents [OSTI]

    Boatner, L.A.; Sales, B.C.

    1989-07-11

    The invention described and claimed in the specification relates to the discovery that effective addition of Fe[sub 2]O[sub 3] to a lead phosphate glass results in a glass having enhanced chemical durability and physical stability, and consists essentially of the glass resulting from melting a mixture consisting essentially of, in weight percent, 40--66 percent PbO, 30--55 percent P[sub 2]O[sub 5] and an effective concentration up to 12 percent Fe[sub 2]O[sub 3].

  14. Non-lead hollow point bullet

    DOE Patents [OSTI]

    Vaughn, Norman L.; Lowden, Richard A.

    2003-04-15

    The non-lead hollow point bullet of the instant invention comprises a mixed construction slug further comprising, a monolithic metal insert having a tapered (preferred conical) hollow point tip and a tapered (preferred conical) tail protrusion, and an unsintered powdered metal composite core in tandem alignment with the insert. The core has a hollow tapered (preferred conical) cavity tip portion coupled with the tapered (preferred conical) tail protrusion on the insert. An open tip jacket envelops at least a portion of the insert and the core. The jacket is swaged at the open tip.

  15. Lead Slowing Down Spectrometer Status Report

    SciTech Connect (OSTI)

    Warren, Glen A.; Anderson, Kevin K.; Bonebrake, Eric; Casella, Andrew M.; Danon, Yaron; Devlin, M.; Gavron, Victor A.; Haight, R. C.; Imel, G. R.; Kulisek, Jonathan A.; O'Donnell, J. M.; Weltz, Adam

    2012-06-07

    This report documents the progress that has been completed in the first half of FY2012 in the MPACT-funded Lead Slowing Down Spectrometer project. Significant progress has been made on the algorithm development. We have an improve understanding of the experimental responses in LSDS for fuel-related material. The calibration of the ultra-depleted uranium foils was completed, but the results are inconsistent from measurement to measurement. Future work includes developing a conceptual model of an LSDS system to assay plutonium in used fuel, improving agreement between simulations and measurement, design of a thorium fission chamber, and evaluation of additional detector techniques.

  16. (Lead-lithium corrosion and chemistry)

    SciTech Connect (OSTI)

    Tortorelli, P.F.

    1990-09-21

    The traveler participated in the 1990 European Workshop on Lead-Lithium Corrosion and Chemistry. Main areas of emphasis in the European liquid metal (exclusively Pb-17 at. % Li) program are now on deposition effects and corrosion-resistant surface product layers that can also serve as barriers to tritium permeation and insulators. Dr. Tortorelli also visited Harwell Laboratory to discuss innovative methods of corrosion analysis. He attended the 16th Symposium on Fusion Technology in London and the initial meeting of the Program Committee for the Second International Symposium on Fusion Nuclear Technology, which will be held in June 1991. He toured the JET facilities as part of the SOFT program.

  17. Nonaqueous solution synthesis process for preparing oxide powders of lead zirconate titanate and related materials

    DOE Patents [OSTI]

    Voigt, James A.; Sipola, Diana L.; Tuttle, Bruce A.; Anderson, Mark T.

    1999-01-01

    A process for producing powders of perovskite-type compounds which comprises mixing a metal alkoxide solution with a lead acetate solution to form a homogeneous, clear metal solution, adding an oxalic acid/n-propanol solution to this metal solution to form an easily filterable, free-flowing precursor powder and then calcining this powder. This process provides fine perovskite-phase powders with ferroelectric properties which are particularly useful in a variety of electronic applications.

  18. Nonaqueous solution synthesis process for preparing oxide powders of lead zirconate titanate and related materials

    DOE Patents [OSTI]

    Voigt, J.A.; Sipola, D.L.; Tuttle, B.A.; Anderson, M.T.

    1999-06-01

    A process is disclosed for producing powders of perovskite-type compounds which comprises mixing a metal alkoxide solution with a lead acetate solution to form a homogeneous, clear metal solution, adding an oxalic acid/n-propanol solution to this metal solution to form an easily filterable, free-flowing precursor powder and then calcining this powder. This process provides fine perovskite-phase powders with ferroelectric properties which are particularly useful in a variety of electronic applications. 4 figs.

  19. SEPARATION OF POLONIUM, PROTACTINIUM OR MIXTURES THEREOF IN AQUEOUS SOLUTION FROM BISMUTH, LEAD, ZIRCONIUM AND/OR COLUMBIUM VALUES

    DOE Patents [OSTI]

    Van Winkle, Q.; Kraus, K.A.

    1959-10-27

    A process is presented for separating polonium, protactinium, or mixtures thereof in aqueous solution from bismuth, zirconium, lead, and niobium values contained in the solution. The method comprises providing hydrochloric acid in the solution in a concentration of at least 5N. contacting the aqueous solution with a substantially waterimmiscible organic solvent such as diisopropyl ketone, and separating the aqueous phase containing the bismuth, zirconium, lead, and niobium from the organic extract phase containing the polonium, protactinium, or mixture thereof.

  20. New Solid Polymer Electrolytes Based on Phosphotungstic Acid | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Solid Polymer Electrolytes Based on Phosphotungstic Acid New Solid Polymer Electrolytes Based on Phosphotungstic Acid A presentation to the High Temperature Membranes Working Group meeting, May 19, 2006. linkous.pdf (2.43 MB) More Documents & Publications Lead Research and Development Activity for High Temperature, Low Relative Humidity Membrane Program Membrane Performance and Durability Overview for Automotive Fuel Cell Applications High Temperature Membrane Working Group,

  1. Lead paint abatement -- A technological review

    SciTech Connect (OSTI)

    Draper, A.C. III; Kapuscik, D.

    1994-12-31

    Abatement of lead from various surfaces proves to be a rapidly developing industry. Removal techniques and effectiveness varies greatly with varying substrates (wood, concrete, steel, etc.) and surface configurations including interior/exterior considerations, habitability and anticipated retrofit. Numerous technologies advances, and/or adaptations of long accepted removal techniques have recently emerged. Some of the more commonly used removal procedures including vacuum blasting, chemical stripping, scarifiers, grinders, sanders, etc. will be reviewed. Specific emphasis will be placed upon mode of application, positive and negative environmental aspects, and varying emissions generated. Personnel sampling data will be discussed with respect to associated personal protective equipment impact to derive the most cost productive environmentally conscious alternatives.

  2. Lead Slowing Down Spectrometer Research Plans

    SciTech Connect (OSTI)

    Warren, Glen A.; Kulisek, Jonathan A.; Gavron, Victor; Danon, Yaron; Weltz, Adam; Harris, Jason; Stewart, T.

    2013-03-22

    The MPACT-funded Lead Slowing Down Spectrometry (LSDS) project has been evaluating the feasibility of using LSDS techniques to assay fissile isotopes in used nuclear fuel assemblies. The approach has the potential to provide considerable improvement in the assay of fissile isotopic masses in fuel assemblies compared to other non-destructive techniques in a direct and independent manner. The LSDS collaborations suggests that the next step to in empirically testing the feasibility is to conduct measurements on fresh fuel assemblies to understand investigate self-attenuation and fresh mixed-oxide (MOX) fuel rodlets so we may betterto understand extraction of masses for 235U and 239Pu. While progressing toward these goals, the collaboration also strongly suggests the continued development of enabling technology such as detector development and algorithm development, thatwhich could provide significant performance benefits.

  3. LOFT lead rod test results evaluation. [PWR

    SciTech Connect (OSTI)

    Driskell, W.B.; Tolman, E.L.

    1980-07-30

    The purpose for evaluating the LOFT Lead Rod Test (simulations of large break, loss-of-coolant accidents) data was to determine; (a) if the centerline thermocouple and fuel rod elongation sensor data show indications of the collapsed fuel rod cladding, (b) the capability of the FRAP-T5 computer code to accurately predict cladding collapse, and (c) if cladding surface thermocouples enhance fuel rod cooling. With consideration to unresolved questions on data integrity, it was concluded that: the fuel rod centerline thermocouple and elongation sensor data do show indications of the fuel rod cladding collapse; the FRAP-T5 code conservatively predicts cladding collapse; and there is an indication that cladding surface thermocouples are enhancing fuel rod cooling.

  4. Jay Srinivasan! Group Lead, Computational Systems!

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Group Lead, Computational Systems! NUG - Feb 2015 Computational Systems Update NERSC - 2014 --- 2 --- Sponsored C ompute S ystems Carver, P DSF, J GI, K BASE, H EP 8 x F DR I B /global/ scratch 4 PB /project 5 PB /home 250 TB 45 P B s tored, 2 40 P B capacity, 4 0 y ears o f community d ata HPSS 48 GB/s 2.2 P B L ocal Scratch 70 GB/s 6.4 P B L ocal Scratch 140 GB/s 80 GB/s 2 x 10 Gb 1 x 100 Gb Science D ata N etwork Vis & A naly?cs, D ata T ransfer N odes, Adv. A rch., S cience G ateways 80

  5. Energy Efficiency Lead-by-Example Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lead-by-Example Resources Energy Efficiency Lead-by-Example Resources State and local governments can lead by example by promoting energy efficiency programs and policies for public facilities, equipment, and government operations. Find energy efficiency lead-by-example resources below. DOE Resource Federal Energy Management Program Publications. Other Resources Environmental Protection Agency: Lead by Example in Government Operations ACEEE's Lead By Example Initiatives National Governors

  6. Alternative Fuels Data Center: San Diego Leads in Promoting EVs

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    San Diego Leads in Promoting EVs to someone by E-mail Share Alternative Fuels Data Center: San Diego Leads in Promoting EVs on Facebook Tweet about Alternative Fuels Data Center: San Diego Leads in Promoting EVs on Twitter Bookmark Alternative Fuels Data Center: San Diego Leads in Promoting EVs on Google Bookmark Alternative Fuels Data Center: San Diego Leads in Promoting EVs on Delicious Rank Alternative Fuels Data Center: San Diego Leads in Promoting EVs on Digg Find More places to share

  7. Water-enhanced solubility of carboxylic acids in organic solvents and its applications to extraction processes

    SciTech Connect (OSTI)

    Starr, J.N.; King, C.J.

    1991-11-01

    The solubilities of carboxylic acids in certain organic solvents increase remarkably with an increasing amount of water in the organic phase. This phenomenon leads to a novel extract regeneration process in which the co-extracted water is selectively removed from an extract, and the carboxylic acid precipitates. This approach is potentially advantageous compared to other regeneration processes because it removes a minor component of the extract in order to achieve a large recovery of acid from the extract. Carboxylic acids of interest include adipic acid, fumaric acid, and succinic acid because of their low to moderate solubilities in organic solvents. Solvents were screened for an increase in acid solubility with increased water concentration in the organic phase. Most Lewis-base solvents were found to exhibit this increased solubility phenomena. Solvents that have a carbonyl functional group showed a very large increase in acid solubility. 71 refs., 52 figs., 38 tabs.

  8. Method for isolating nucleic acids

    SciTech Connect (OSTI)

    Hurt, Jr., Richard Ashley; Elias, Dwayne A.

    2015-09-29

    The current disclosure provides methods and kits for isolating nucleic acid from an environmental sample. The current methods and compositions further provide methods for isolating nucleic acids by reducing adsorption of nucleic acids by charged ions and particles within an environmental sample. The methods of the current disclosure provide methods for isolating nucleic acids by releasing adsorbed nucleic acids from charged particles during the nucleic acid isolation process. The current disclosure facilitates the isolation of nucleic acids of sufficient quality and quantity to enable one of ordinary skill in the art to utilize or analyze the isolated nucleic acids for a wide variety of applications including, sequencing or species population analysis.

  9. New Superconducting Magnet Will Lead to Next Generation of Wind...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Superconducting Magnet Will Lead to Next Generation of Wind Turbine Generators New Superconducting Magnet Will Lead to Next Generation of Wind Turbine Generators September 12, 2014 ...

  10. SEEWEC Consortium lead partner Ghent University | Open Energy...

    Open Energy Info (EERE)

    SEEWEC Consortium lead partner Ghent University Jump to: navigation, search Name: SEEWEC Consortium lead partner Ghent University Address: Sint Pietersnieuwstraat 41 Place: Gent...

  11. Low Emission Asian Development (LEAD) Program | Open Energy Informatio...

    Open Energy Info (EERE)

    Low Emission Asian Development (LEAD) Program Redirect page Jump to: navigation, search REDIRECT Low Emissions Asian Development (LEAD) Program Retrieved from "http:...

  12. Volunteers Leading Technology, A Case Study: Chewonki Renewable...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Volunteers Leading Technology, A Case Study: Chewonki Renewable Hydrogen Project Volunteers Leading Technology, A Case Study: Chewonki Renewable Hydrogen Project This presentation ...

  13. Fuel Cell Expert Dr. Sanjiv Malhotra to Lead Energy Department...

    Energy Savers [EERE]

    Expert Dr. Sanjiv Malhotra to Lead Energy Department's Clean Energy Investment Center Fuel Cell Expert Dr. Sanjiv Malhotra to Lead Energy Department's Clean Energy Investment ...

  14. Lead Hexacyanoferrate(II) Tetrahydrate: Crystal Structure, FTIR...

    Office of Scientific and Technical Information (OSTI)

    Lead Hexacyanoferrate(II) Tetrahydrate: Crystal Structure, FTIR Spectroscopy and Thermal Decomposition Studies Citation Details In-Document Search Title: Lead Hexacyanoferrate(II) ...

  15. Bush Administration Plays Leading Role in Studying and Addressing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bush Administration Plays Leading Role in Studying and Addressing Global Climate Change Bush Administration Plays Leading Role in Studying and Addressing Global Climate Change...

  16. Fractionated Radiation Exposure of Rat Spinal Cords Leads to...

    Office of Scientific and Technical Information (OSTI)

    Fractionated Radiation Exposure of Rat Spinal Cords Leads to Latent Neuro-Inflammation in ... of Rat Spinal Cords Leads to Latent Neuro-Inflammation in Brain, Cognitive Deficits, ...

  17. Solar Decathlon 2015: Nation's Leading Sustainable Home Design...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar Decathlon 2015: Nation's Leading Sustainable Home Design Competition on the Horizon Solar Decathlon 2015: Nation's Leading Sustainable Home Design Competition on the Horizon...

  18. Acid mine drainage: Balancing environmental protection and mining realities

    SciTech Connect (OSTI)

    Sturgill, B.J. Jr.; Poland, K.B.

    1995-12-31

    A major environmental concern leading to the enactment of the Surface Mining Control and Reclamation Act of 1977 (SMCRA) was the degradation of streams and waterways from discharges of acid mine drainage (AMD) resulting from coal mining operations. Although SMCRA and its regulatory scheme contains specific provisions addressing the drainage of acidic water from mine sites, as do various other agencies statutes and regulations, AMD from active and abandoned mines remains a major environmental problem in the Appalachian region. The formation of acidic water during coal mining operations is pervasive and some believe impossible to prevent.

  19. Isotopic generator for bismuth-212 and lead-212 based on radium

    DOE Patents [OSTI]

    Hines, J.J.; Atcher, R.W.; Friedman, A.M.

    1985-01-30

    Disclosed are method and apparatus for providing radionuclides of bismuth-212 and lead-212. Thorium-228 and carrier solution starting material is input to a radiologically contained portion of an isotopic generator system, and radium-224 is separated from thorium-228 which is retained by a strongly basic anion exchange column. The separated radium-224 is transferred to an accessible, strongly acidic cationic exchange column. The cationic column retains the radium-224, and natural radioactive decay generates bismuth-212 and lead-212. The cationic exchange column can also be separated from the contained portion of the system and utilized without the extraordinary safety measures necessary in the contained portion. Furthermore, the cationic exchange column provides over a relatively long time period the short lived lead-212 and bismuth-212 radionuclides which are useful for a variety of medical therapies.

  20. Ultrasound in lead-bismuth eutectic

    SciTech Connect (OSTI)

    Dierckx, M.; Van Dyck, D.

    2011-07-01

    The Belgian Nuclear Research Centre (SCK.CEN) is in the process of designing MYRRHA, a new multi-purpose irradiation facility to replace the ageing BR2. MYRRHA is a fast spectrum reactor cooled with lead-bismuth eutectic (LBE). As liquid metal is opaque to visual light, ultrasonic measurement techniques are selected to fulfill essential tasks that, according to our assessment, will be demanded by licensing authorities, in particular: fuel assembly identification and localization of a lost fuel assembly. To that end, a considerable research effort at SCK.CEN is devoted to study ultrasonic propagation in LBE. As ultrasonic experiments in LBE are elaborate and expensive to set up, we are particularly interested in to what extent experiments in water can be extrapolated to LBE - one of the main focuses of this article. We describe and present results of a first experiment with this goal which shows that the signal to noise ratio is better in LBE and that we even see small diffuse reflections up to 40 deg. off normal. On the other hand, we do not see internal reflections in stainless steel objects in LBE which we do in water. Therefore, we conclude that experiments in water can be used to validate algorithms for LBE on the condition that they do not rely on internal reflections. We also present solutions to tackle the essential tasks: fuel assembly identification and lost object localization. The requirements for the ultrasonic equipment implementing these solutions are also discussed. (authors)

  1. Optical high acidity sensor

    DOE Patents [OSTI]

    Jorgensen, B.S.; Nekimken, H.L.; Carey, W.P.; O`Rourke, P.E.

    1997-07-22

    An apparatus and method for determining acid concentrations in solutions having acid concentrations of from about 0.1 Molar to about 16 Molar is disclosed. The apparatus includes a chamber for interrogation of the sample solution, a fiber optic light source for passing light transversely through the chamber, a fiber optic collector for receiving the collimated light after transmission through the chamber, a coating of an acid resistant polymeric composition upon at least one fiber end or lens, the polymeric composition in contact with the sample solution within the chamber and having a detectable response to acid concentrations within the range of from about 0.1 Molar to about 16 Molar, a measurer for the response of the polymeric composition in contact with the sample solution, and a comparer of the measured response to predetermined standards whereby the acid molarity of the sample solution within the chamber can be determined. Preferably, a first lens is attached to the end of the fiber optic light source, the first lens adapted to collimate light from the fiber optic light source, and a second lens is attached to the end of the fiber optic collector for focusing the collimated light after transmission through the chamber. 10 figs.

  2. Optical high acidity sensor

    DOE Patents [OSTI]

    Jorgensen, Betty S.; Nekimken, Howard L.; Carey, W. Patrick; O'Rourke, Patrick E.

    1997-01-01

    An apparatus and method for determining acid concentrations in solutions having acid concentrations of from about 0.1 Molar to about 16 Molar is disclosed. The apparatus includes a chamber for interrogation of the sample solution, a fiber optic light source for passing light transversely through the chamber, a fiber optic collector for receiving the collimated light after transmission through the chamber, a coating of an acid resistant polymeric composition upon at least one fiber end or lens, the polymeric composition in contact with the sample solution within the chamber and having a detectable response to acid concentrations within the range of from about 0.1 Molar to about 16 Molar, a measurer for the response of the polymeric composition in contact with the sample solution, and, a comparer of the measured response to predetermined standards whereby the acid molarity of the sample solution within the chamber can be determined. Preferably, a first lens is attached to the end of the fiber optic light source, the first lens adapted to collimate light from the fiber optic light source, and a second lens is attached to the end of the fiber optic collector for focusing the collimated light after transmission through the chamber.

  3. Get the lead out! removing lead-based paint on hydro plant structures

    SciTech Connect (OSTI)

    Johnson, M.L.

    1996-05-01

    This article describes a hydroblasting technology used to remove lead-based surface coatings from the steel associated with the flood gates at the Wirtz Dam. Using this technology and an advanced moisture-cured urethane coating, the Lower Colorado River Authority was able to save more than $250,000 in materials, labor, and waste disposal costs.

  4. Building Standards Lead-by-Example Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standards Lead-by-Example Resources Building Standards Lead-by-Example Resources State and local governments can lead by example by promoting energy efficiency programs and policies for public facilities, equipment, and government operations. Find building standards lead-by-example resources below. DOE Resource National Best Practices Manual For Building High Performance Schools. Other Resource Roadmap to Green Government Buildings

  5. Microsoft Word - Final Lead Assembly SA.doc

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... of European Fabrication of Lead MOX Assemblies. ...... 20 Table 4. Comparison of Human Health ...

  6. MULTI-TUBE POWER LEADS TOWER FOR BEPCII IR MAGNETS.

    SciTech Connect (OSTI)

    JIA,L.X.; ZHANG,X.B.; WANG,L.; WANG,T.H.; YAO,Z.L.

    2004-05-11

    A power lead tower containing the multi-tube power leads is designed and under fabrication for the superconducting IR quadrupole magnets in the Beijing Electron Position Collider Upgrade (BEPCII). The lead tower consists of six pairs of gas-cooled leads for seven superconducting coils at various operating currents. The power lead is designed in a modular fashion, which can be easily applied to suit different operating current. The end copper block of the tube lead has a large cold mass that provide a large time constant in case of cooling flow interruption. A novel cryogenic electrical isolator is used for the leads.

  7. Plant fatty acid hydroxylase

    DOE Patents [OSTI]

    Somerville, Chris; van de Loo, Frank

    2000-01-01

    The present invention relates to the identification of nucleic acid sequences and constructs, and methods related thereto, and the use of these sequences and constructs to produce genetically modified plants for the purpose of altering the composition of plant oils, waxes and related compounds.

  8. Synthesis of acid addition salt of delta-aminolevulinic acid from 5-bromo levulinic acid esters

    DOE Patents [OSTI]

    Moens, Luc

    2003-06-24

    A process of preparing an acid addition salt of delta-aminolevulinc acid comprising: a) dissolving a lower alkyl 5-bromolevulinate and hexamethylenetetramine in a solvent selected from the group consisting of water, ethyl acetate, chloroform, acetone, ethanol, tetrahydrofuran and acetonitrile, to form a quaternary ammonium salt of the lower alkyl 5-bromolevulinate; and b) hydrolyzing the quaternary ammonium salt with an inorganic acid to form an acid addition salt of delta-aminolevulinic acid.

  9. Stress response of lead-exposed rainbow trout (Oncorhynchus mykiss) during swimming performance and hypoxia challenges

    SciTech Connect (OSTI)

    Phillips, K.A. |; Caldwell, C.A.; Sandheinrich, M.B.

    1995-12-31

    Contaminants often invoke a stress response in aquatic organisms, and may compromise their capacity to respond to secondary stressors. This may reduce growth, reproduction and survival. The authors objectives were to assess the effects of lead and secondary stressors on hematology and blood chemistry of rainbow trout. After a 7 to 8-week aqueous exposure to Pb(100{micro}g/L), rainbow trout were challenged with forced swimming or hypoxia. Lead significantly reduced concentrations of 5-aminolevulinic acid dehydratase (ALAD), but not other constituents in the blood. Lead did not affect the swimming endurance of the fish. Hematocrit, mean cell hemoglobin content, and mean cell volume were significantly lower in Pb-exposed trout following the swimming challenge. Although hypoxia resulted in increased hematocrit and plasma glucose concentrations, there were no significant differences between the Pb and control groups. Hypoxia did not affect plasma chloride concentrations, although concentrations increased in Pb-exposed trout. There was no difference in lactic acid concentrations between Pb-exposed and control fish after forced swimming or hypoxia.

  10. EFFECTS OF NITRIC ACID ON CRITICALITY SAFETY ANALYSIS

    SciTech Connect (OSTI)

    Williamson, B.

    2011-08-18

    As nitric acid molarity is increased, there are two competing phenomena affecting the reactivity of the system. First, there is interaction between each of the 10 wells in the basket-like insert. As the molarity of the nitric acid solution is increased (it moves from 100% water to 100% HNO{sub 3}), the hydrogen atom density decreases by about 80%. However, it remains a relatively efficient moderator. The moderating ratio of nitric acid is about 90% that of water. As the media between the wells is changed from 100% water to 100% nitric acid, the density of the media increases by 50%. A higher density typically leads to a better reflector. However, when the macroscopic scattering cross sections are considered, nitric acid is a much worse reflector than water. The effectiveness of nitric acid as a reflector is about 40% that of water. Since the media between the wells become a worse reflector and still remains an effective moderator, interaction between the wells increases. This phenomenon will cause reactivity to increase as nitric acid molarity increases. The seond phenomenon is due to the moderating ratio changing in the high concentration fissile-nitric acid solution in the 10 wells. Since the wells contain relatively small volumes of high concentration solutions, a small decrease in moderating power has a large effect on reactivity. This is due to the fact that neutrons are more likely to escape the high concentration fissile solution before causing another fission event. The result of this phenomenon is that as nitric acid molarity increases, reactivity decreases. Recent studies have shown that the second phenomenon is indeed the dominating force in determining reactivity changes in relation to nitric acid molarity changes. When considering the system as a whole, as nitric acid molarity increases, reactivity decreases.

  11. Fatty acid-producing hosts

    DOE Patents [OSTI]

    Pfleger, Brian F; Lennen, Rebecca M

    2013-12-31

    Described are hosts for overproducing a fatty acid product such as a fatty acid. The hosts include an exogenous nucleic acid encoding a thioesterase and, optionally, an exogenous nucleic acid encoding an acetyl-CoA carboxylase, wherein an acyl-CoA synthetase in the hosts are functionally delected. The hosts prefereably include the nucleic acid encoding the thioesterase at an intermediate copy number. The hosts are preferably recominantly stable and growth-competent at 37.degree. C. Methods of producing a fatty acid product comprising culturing such hosts at 37.degree. C. are also described.

  12. Acid diffusion through polyaniline membranes

    SciTech Connect (OSTI)

    Su, T.M.; Huang, S.C.; Conklin, J.A.

    1995-12-01

    Polyaniline membranes in the undoped (base) and doped (acid) forms are studied for their utility as pervaporation membranes. The separation of water from mixtures of propionic acid, acetic acid and formic acid have been demonstrated from various feed compositions. Doped polyaniline displays an enhanced selectivity of water over these organic acids as compared with undoped polyaniline. For as-cast polyaniline membranes a diffusion coefficient (D) on the order of 10{sup -9} cm{sup 2}/sec has been determined for the flux of protons through the membranes using hydrochloric acid.

  13. Evaluation of lead/carbon devices for utility applications : a study for the DOE Energy Storage Program.

    SciTech Connect (OSTI)

    Walmet, Paula S.

    2009-06-01

    This report describes the results of a three-phase project that evaluated lead-based energy storage technologies for utility-scale applications and developed carbon materials to improve the performance of lead-based energy storage technologies. In Phase I, lead/carbon asymmetric capacitors were compared to other technologies that used the same or similar materials. At the end of Phase I (in 2005) it was found that lead/carbon asymmetric capacitors were not yet fully developed and optimized (cost/performance) to be a viable option for utility-scale applications. It was, however, determined that adding carbon to the negative electrode of a standard lead-acid battery showed promise for performance improvements that could be beneficial for use in utility-scale applications. In Phase II various carbon types were developed and evaluated in lead-acid batteries. Overall it was found that mesoporous activated carbon at low loadings and graphite at high loadings gave the best cycle performance in shallow PSoC cycling. Phase III studied cost/performance benefits for a specific utility application (frequency regulation) and the full details of this analysis are included as an appendix to this report.

  14. DOE ZERH Second Leading Builder Round Table Meeting Report |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE ZERH Second Leading Builder Round Table Meeting Report On October 23rd-24th, 2014, the ZERH program held its Second Leading Production Builder Round Table Meeting in Suwanee, ...

  15. Energy Department to Lead Workshop on Tribal Renewable Energy...

    Office of Environmental Management (EM)

    Lead Workshop on Tribal Renewable Energy Development in Oklahoma Energy Department to Lead Workshop on Tribal Renewable Energy Development in Oklahoma June 1, 2015 - 9:50am Addthis ...

  16. Fatal pediatric poisoning from leaded paint--Wisconsin, 1990

    SciTech Connect (OSTI)

    Not Available

    1991-03-29

    Although fatal lead poisoning among children occurs rarely in the United States, it represents a medical and public health emergency. This report summarizes the investigation of a child who died from poisoning associated with ingestion of lead-based paint.

  17. Engineer Russ Feder leads development of diagnostic tools for...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineer Russ Feder leads development of diagnostic tools for US ITER as physicist Dave ... Feder leads PPPL's development of all diagnostic tools for US ITER, which manages U.S. ...

  18. Zarb Appointed to Lead the Federal Energy Administration | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) Zarb Appointed to Lead the Federal Energy Administration Zarb Appointed to Lead the Federal Energy Administration Washington, DC President Ford appoints Frank Zarb to be the first Administrator of the newly created Federal Energy Agency

  19. PNNL Breakthrough Leads to Less Foreign Oil, More American Jobs...

    Energy Savers [EERE]

    PNNL Breakthrough Leads to Less Foreign Oil, More American Jobs PNNL Breakthrough Leads to Less Foreign Oil, More American Jobs October 17, 2011 - 2:50pm Addthis A highly efficient ...

  20. Crystal structure and compressibility of lead dioxide up to 140...

    Office of Scientific and Technical Information (OSTI)

    Crystal structure and compressibility of lead dioxide up to 140 GPa Citation Details In-Document Search Title: Crystal structure and compressibility of lead dioxide up to 140 GPa ...

  1. GE leads the way in photonics research | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GE continues leading role in photonics industry - from LED to digital x-ray Click to email ... GE continues leading role in photonics industry - from LED to digital x-ray Danielle ...

  2. Getting the lead out: Citizen involvement in the Williamsburg Bridge lead paint removal project

    SciTech Connect (OSTI)

    Forker, T.R.

    1997-08-01

    This paper examines the process and results of citizen involvement in developing new environmental control and compliance procedures used by the New York City Department of Transportation (NYC DOT) for lead paint removal on the Williamsburg Bridge and other structures. As a case study of the effects of public involvement in environmental decision-making, the study identifies and discusses the factors that produced failures or successes in satisfying the citizen`s concerns about health risks and the effectiveness of the selected pollution control technology.

  3. Alternative Fuels Data Center: Smoky Mountains Leads the Way in

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Implementing Alternative Fuels Smoky Mountains Leads the Way in Implementing Alternative Fuels to someone by E-mail Share Alternative Fuels Data Center: Smoky Mountains Leads the Way in Implementing Alternative Fuels on Facebook Tweet about Alternative Fuels Data Center: Smoky Mountains Leads the Way in Implementing Alternative Fuels on Twitter Bookmark Alternative Fuels Data Center: Smoky Mountains Leads the Way in Implementing Alternative Fuels on Google Bookmark Alternative Fuels Data

  4. Retrofit Program Lead-by-Example Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Retrofit Program Lead-by-Example Resources Retrofit Program Lead-by-Example Resources State and local governments can lead by example by promoting energy efficiency programs and policies for public facilities, equipment, and government operations. Find retrofit program lead-by-example resources below. Local Government Climate and Energy Strategy Series: Energy Efficiency in Local Government Operations: A Guide to Developing and Implementing Greenhouse Gas Reduction Programs ACEEE: Comprehensive

  5. Cities Leading Through Energy Analysis and Planning Infographic |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Cities Leading Through Energy Analysis and Planning Infographic Cities Leading Through Energy Analysis and Planning Infographic The Cities Leading through Energy Analysis and Planning (Cities-LEAP) project delivers standardized, localized energy data and analysis that enables cities to lead clean energy innovation and integrate strategic energy analysis into decision making. Two Cities-LEAP infographics catalog the programs and tools currently supporting local

  6. 2015 Leading Builder Round Table Report | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Leading Builder Round Table Report 2015 Leading Builder Round Table Report The nation is on the cusp of a dramatic movement to zero energy ready homes. This includes statewide codes, large developments, and a growing amount of commitment to the DOE Zero Energy Ready Home program. Much of this progress can be attributed to a small contingent of our nation's leading builders who are demonstrating the technical, cost, and design feasibility for this level of excellence At the 2015 Leading Builder

  7. Procurement Standards Lead-by-Example Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Procurement Standards Lead-by-Example Resources Procurement Standards Lead-by-Example Resources State and local governments can lead by example by promoting energy efficiency programs and policies for public facilities, equipment, and government operations. Find procurement standards lead-by-example resources below. DOE Resource Energy-Efficient Product Procurement. Other Resources ENERGY STAR®: All Certified Products New York State Energy Research and Development Authority: Procurement

  8. NNSA Leads Conference on Nonproliferation Research and Development |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration | (NNSA) Leads Conference on Nonproliferation Research and Development December 04, 2008 WASHINGTON, D.C. -- The National Nuclear Security Administration (NNSA) concluded a conference showcasing the leading edge nuclear nonproliferation research being conducted at premier universities and by industry experts. The University and Industry Technical Interchange (UITI) included over 75 presentations by leading researchers to showcase nuclear detection

  9. Lubrication with boric acid additives

    DOE Patents [OSTI]

    Erdemir, Ali

    2000-01-01

    Self-lubricating resin compositions including a boric acid additive and a synthetic polymer including those thermoset materials.

  10. Carboxylic acid sorption regeneration process

    DOE Patents [OSTI]

    King, C.J.; Poole, L.J.

    1995-05-02

    Carboxylic acids are sorbed from aqueous feedstocks into an organic liquid phase or onto a solid adsorbent. The acids are freed from the sorbent phase by treating it with aqueous alkylamine thus forming an alkylammonium carboxylate which is dewatered and decomposed to the desired carboxylic acid and the alkylamine. 10 figs.

  11. Carboxylic acid sorption regeneration process

    DOE Patents [OSTI]

    King, C. Judson; Poole, Loree J.

    1995-01-01

    Carboxylic acids are sorbed from aqueous feedstocks into an organic liquid phase or onto a solid adsorbent. The acids are freed from the sorbent phase by treating it with aqueous alkylamine thus forming an alkylammonium carboxylate which is dewatered and decomposed to the desired carboxylic acid and the alkylamine.

  12. Pantothenic acid biosynthesis in zymomonas

    DOE Patents [OSTI]

    Tao, Luan; Tomb, Jean-Francois; Viitanen, Paul V.

    2014-07-01

    Zymomonas is unable to synthesize pantothenic acid and requires this essential vitamin in growth medium. Zymomonas strains transformed with an operon for expression of 2-dehydropantoate reductase and aspartate 1-decarboxylase were able to grow in medium lacking pantothenic acid. These strains may be used for ethanol production without pantothenic acid supplementation in seed culture and fermentation media.

  13. Lab Breakthrough: Lead-free Solder | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lead-free Solder Lab Breakthrough: Lead-free Solder May 24, 2012 - 10:45am Addthis Iver Anderson, senior metallurgist at Ames Laboratory, explains the importance of lead-free solder in taking hazardous lead out of the environment by eliminating it from discarded computers and electronics that wind up in landfills. Anderson led a team that developed a tin-silver-copper replacement for traditional lead-tin solder that has been adopted by more than 50 companies worldwide. View the entire Lab

  14. Lead contamination in the Mallard (Anas platyrhynchos) in Italy

    SciTech Connect (OSTI)

    Tirelli, E.; Maestrini, N.; Govoni, S.; Catelli, E.

    1996-05-01

    The main cause of lead poisoning in waterfowl is due to ingestion of spent lead shot in areas of high hunting pressure . Italian literature on this subject is very scarce and the few available studies concern episodic cases. to contribute to the assessment of the impact of lead shot in waterfowl in Italy, systematic research has been carried out on shorebirds caught for ringing in Tiscany and are continuing on dabbling and diving ducks by checking the presence of lead in blood samples and lead shot in the gizzard. This study targets the mallard duck. 17 refs., 1 fig., 1 tab.

  15. Composition for nucleic acid sequencing

    DOE Patents [OSTI]

    Korlach, Jonas; Webb, Watt W.; Levene, Michael; Turner, Stephen; Craighead, Harold G.; Foquet, Mathieu

    2008-08-26

    The present invention is directed to a method of sequencing a target nucleic acid molecule having a plurality of bases. In its principle, the temporal order of base additions during the polymerization reaction is measured on a molecule of nucleic acid, i.e. the activity of a nucleic acid polymerizing enzyme on the template nucleic acid molecule to be sequenced is followed in real time. The sequence is deduced by identifying which base is being incorporated into the growing complementary strand of the target nucleic acid by the catalytic activity of the nucleic acid polymerizing enzyme at each step in the sequence of base additions. A polymerase on the target nucleic acid molecule complex is provided in a position suitable to move along the target nucleic acid molecule and extend the oligonucleotide primer at an active site. A plurality of labelled types of nucleotide analogs are provided proximate to the active site, with each distinguishable type of nucleotide analog being complementary to a different nucleotide in the target nucleic acid sequence. The growing nucleic acid strand is extended by using the polymerase to add a nucleotide analog to the nucleic acid strand at the active site, where the nucleotide analog being added is complementary to the nucleotide of the target nucleic acid at the active site. The nucleotide analog added to the oligonucleotide primer as a result of the polymerizing step is identified. The steps of providing labelled nucleotide analogs, polymerizing the growing nucleic acid strand, and identifying the added nucleotide analog are repeated so that the nucleic acid strand is further extended and the sequence of the target nucleic acid is determined.

  16. Invasive cleavage of nucleic acids

    DOE Patents [OSTI]

    Prudent, James R.; Hall, Jeff G.; Lyamichev, Victor I.; Brow, Mary Ann D.; Dahlberg, James E.

    2002-01-01

    The present invention relates to means for the detection and characterization of nucleic acid sequences, as well as variations in nucleic acid sequences. The present invention also relates to methods for forming a nucleic acid cleavage structure on a target sequence and cleaving the nucleic acid cleavage structure in a site-specific manner. The structure-specific nuclease activity of a variety of enzymes is used to cleave the target-dependent cleavage structure, thereby indicating the presence of specific nucleic acid sequences or specific variations thereof.

  17. Invasive cleavage of nucleic acids

    DOE Patents [OSTI]

    Prudent, James R.; Hall, Jeff G.; Lyamichev, Victor I.; Brow, Mary Ann D.; Dahlberg, James E.

    1999-01-01

    The present invention relates to means for the detection and characterization of nucleic acid sequences, as well as variations in nucleic acid sequences. The present invention also relates to methods for forming a nucleic acid cleavage structure on a target sequence and cleaving the nucleic acid cleavage structure in a site-specific manner. The structure-specific nuclease activity of a variety of enzymes is used to cleave the target-dependent cleavage structure, thereby indicating the presence of specific nucleic acid sequences or specific variations thereof.

  18. Telomere length in children environmentally exposed to low-to-moderate levels of lead

    SciTech Connect (OSTI)

    Pawlas, Natalia; Płachetka, Anna; Kozłowska, Agnieszka; Broberg, Karin; Kasperczyk, Sławomir

    2015-09-01

    Shorter relative telomere length in peripheral blood is a risk marker for some types of cancers and cardiovascular diseases. Several environmental hazards appear to shorten telomeres, and this shortening may predispose individuals to disease. The aim of the present cross-sectional study was to assess the effect of environmental exposure to lead on relative telomere length (rTL) in children. A cohort of 99 8-year-old children was enrolled from 2007–2010. Blood lead concentrations (B-Pb) were measured by graphite furnace atomic absorption spectrometry, and blood rTL was measured by quantitative PCR. The geometric mean of B-Pb was 3.28 μg/dl (range: 0.90–14.2), and the geometric mean of rTL was 1.08 (range: 0.49–2.09). B-Pb was significantly inversely associated with rTL in the children (r{sub S} = − 0.25, p = 0.013; in further analyses both log-transformed-univariate regression analysis β = − 0.13, p = 0.026, and R{sup 2}adj 4%; and β = − 0.12, p = 0.056 when adjusting for mothers' smoking during pregnancy, Apgar score, mother's and father's ages at delivery, sex and mother's education, R{sup 2}adj 12%, p = 0.011). The effect of lead remained significant in children without prenatal tobacco exposure (N = 87, r{sub S} = − 0.24, p = 0.024; in further analyses, β = − 0.13, p = 0.029, and R{sup 2}adj 4%). rTL was not affected by sex, the concentrations of other elements in the blood (i.e., cadmium and selenium concentrations), or oxidative injury parameters (total antioxidant status, 8-hydroxydeoxyguanosine and thiobarbituric acid-reactive substances). Lead exposure in childhood appears to be associated with shorter telomeres, which might contribute to diseases, such as cardiovascular disease. The inverse association between blood lead level and the telomeres in children emphasizes the importance of further reducing lead levels in the environment. - Highlights: • This cross-sectional study analyzes the association between environmental lead exposure

  19. Synthesis of amino acids

    DOE Patents [OSTI]

    Davis, J.W. Jr.

    1979-09-21

    A method is described for synthesizing amino acids preceding through novel intermediates of the formulas: R/sub 1/R/sub 2/C(OSOC1)CN, R/sub 1/R/sub 2/C(C1)CN and (R/sub 1/R/sub 2/C(CN)O)/sub 2/SO wherein R/sub 1/ and R/sub 2/ are each selected from hydrogen and monovalent hydrocarbon radicals of 1 to 10 carbon atoms. The use of these intermediates allows the synthesis steps to be exothermic and results in an overall synthesis method which is faster than the synthesis methods of the prior art.

  20. Nucleic Acid Detection Methods

    DOE Patents [OSTI]

    Smith, Cassandra L.; Yaar, Ron; Szafranski, Przemyslaw; Cantor, Charles R.

    1998-05-19

    The invention relates to methods for rapidly determining the sequence and/or length a target sequence. The target sequence may be a series of known or unknown repeat sequences which are hybridized to an array of probes. The hybridized array is digested with a single-strand nuclease and free 3'-hydroxyl groups extended with a nucleic acid polymerase. Nuclease cleaved heteroduplexes can be easily distinguish from nuclease uncleaved heteroduplexes by differential labeling. Probes and target can be differentially labeled with detectable labels. Matched target can be detected by cleaving resulting loops from the hybridized target and creating free 3-hydroxyl groups. These groups are recognized and extended by polymerases added into the reaction system which also adds or releases one label into solution. Analysis of the resulting products using either solid phase or solution. These methods can be used to detect characteristic nucleic acid sequences, to determine target sequence and to screen for genetic defects and disorders. Assays can be conducted on solid surfaces allowing for multiple reactions to be conducted in parallel and, if desired, automated.

  1. Nucleic acid detection methods

    DOE Patents [OSTI]

    Smith, C.L.; Yaar, R.; Szafranski, P.; Cantor, C.R.

    1998-05-19

    The invention relates to methods for rapidly determining the sequence and/or length a target sequence. The target sequence may be a series of known or unknown repeat sequences which are hybridized to an array of probes. The hybridized array is digested with a single-strand nuclease and free 3{prime}-hydroxyl groups extended with a nucleic acid polymerase. Nuclease cleaved heteroduplexes can be easily distinguish from nuclease uncleaved heteroduplexes by differential labeling. Probes and target can be differentially labeled with detectable labels. Matched target can be detected by cleaving resulting loops from the hybridized target and creating free 3-hydroxyl groups. These groups are recognized and extended by polymerases added into the reaction system which also adds or releases one label into solution. Analysis of the resulting products using either solid phase or solution. These methods can be used to detect characteristic nucleic acid sequences, to determine target sequence and to screen for genetic defects and disorders. Assays can be conducted on solid surfaces allowing for multiple reactions to be conducted in parallel and, if desired, automated. 18 figs.

  2. Ozone and acid rain

    SciTech Connect (OSTI)

    Not Available

    1987-10-09

    The roles of ozone and other oxidizing agents are discussed. The major polluting emissions are SO/sub 2/, NO, and volatile organic chemicals. In the usual ambient concentrations, these substances are relatively harmless. However, when SO/sub 2/ and NO are oxidized, they are converted into more acid, more toxic, substances. Oxidants, including OH, H/sub 2/O/sub 2/, HO/sub 2/, and organic peroxides, arise out of complex photochemistry that involves the ozone, the nitrogen oxides, and volatile organic chemicals. Were SO/sub 2/ the only pollutant, most of it would escape unchanged to the western Atlantic Ocean where it would be so diluted as to have no effect. At present about 35 percent of the SO/sub 2/ produced in the United States leaves the continent. In contrast, because of higher rates of reaction with oxidants, most of the NO is converted into nitric acid and deposited on land. The nitrogen oxides are involved in the production of ozone, some of which is naturally present. But particularly in urban settings where concentrations of NO/sub x/ are elevated and volatile organic chemicals such as those in gasoline are present, ozone concentrations may rise to levels deleterious to health. The Environmental Protection Agency has set standards for levels not to be exceeded, but nearly half of urban communities are not in compliance. The NO/sub x/ involved in the formation of urban ozone comes mostly from vehicular emissions.

  3. Reversible and irreversible ion migration processes in lead halide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    perovskites for photovoltaics | MIT-Harvard Center for Excitonics Reversible and irreversible ion migration processes in lead halide perovskites for photovoltaics March 9, 2016 at 4:30 PM/36-462 Eric Hoke Stanford University, Draper Laboratory hoke-eric Lead hybrid perovskites are a promising family of photovoltaic absorber materials that have achieved power conversion efficiencies of over 20%. Lead halide perovskites are ionic materials with a low lattice energy which are unusual properties

  4. Energy Secretary Bodman Leads US Delegation to International Energy Agency

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ministerial | Department of Energy Leads US Delegation to International Energy Agency Ministerial Energy Secretary Bodman Leads US Delegation to International Energy Agency Ministerial May 2, 2005 - 12:41pm Addthis PARIS, FRANCE -- Secretary of Energy Samuel W. Bodman this week is leading the U.S. Delegation to the Ministerial Meeting of the International Energy Agency (IEA), being held in Paris. Secretary Bodman will emphasize three principles at the IEA Ministerial -- that energy security

  5. Bush Administration Plays Leading Role in Studying and Addressing Global

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Climate Change | Department of Energy Plays Leading Role in Studying and Addressing Global Climate Change Bush Administration Plays Leading Role in Studying and Addressing Global Climate Change February 27, 2007 - 3:49pm Addthis Washington, DC - Continuing to take the lead in addressing global climate change, Energy Secretary Samuel Bodman, Environmental Protection Agency (EPA) Administrator Stephen Johnson, and National Oceanic and Atmospheric Administration (NOAA) Administrator Vice

  6. EERE Success Story- Hydropower Fellowship Program Leading Students to

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industry Careers | Department of Energy Hydropower Fellowship Program Leading Students to Industry Careers EERE Success Story- Hydropower Fellowship Program Leading Students to Industry Careers April 20, 2016 - 12:15pm Addthis EERE Success Story— Hydropower Fellowship Program Leading Students to Industry Careers The Hydro Research Foundation's (HRF) Hydro Fellowship Program allowed outstanding up-and-coming student fellows to conduct hydropower-related research-all made possible by a

  7. Kjiersten Fagnan Appointed NERSC/JGI Engagement Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Kjiersten Fagnan Named NERSC/JGI Engagement Lead Kjiersten Fagnan Appointed NERSC/JGI Engagement Lead September 1, 2014 fagnan.jpg Kjiersten Fagnan has been named the NERSC/JGI Engagement Lead for Joint Genome Institute (JGI) computational and data analysis efforts carried out at the Department of Energy's (DOE) National Energy Research Scientific Computing Center (NERSC). Fagnan, who holds a Ph.D. in Applied Mathematics from the University of Washington, started at NERSC as a petascale postdoc

  8. NNSA Computers Lead Global List | National Nuclear Security Administra...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Computers Lead Global List | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering...

  9. Deputy Secretary of Energy Reviews Leading Nuclear Counterterrorism...

    National Nuclear Security Administration (NNSA)

    Deputy Secretary of Energy Reviews Leading Nuclear Counterterrorism Assets at Andrews Air Force Base September 09, 2009 WASHINGTON, D.C. - Deputy Secretary of Energy Daniel Poneman ...

  10. Fatigue of extracted lead zirconate titanate multilayer actuators...

    Office of Scientific and Technical Information (OSTI)

    Testing of large prototype lead zirconate titanate (PZT) stacks presents substantial technical challenges to electronic testing systems, so an alternative approach that uses ...

  11. Mainzer taps Gendron, Ehli to lead Power and Corporate Strategy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mainzer-taps-Gendron-Ehli-to-lead-Power-and-Corporate-Strategy Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects & Initiatives...

  12. Method of manufacturing lead electrodes for storage cells

    DOE Patents [OSTI]

    Jonville, P.; Stoehr, H.; Beccu, K.D.

    1975-09-23

    A method of manufacturing electrodes for lead storage batteries is described. Molten lead or lead alloy is deposited on a felt of glass fibers by spraying in a molten state to fill the space between the fibers of the felt to form an electrically conductive zone defining electrode contacts. A mass of powdered lead-based material is introduced into the felt by filtration for subsequently producing an active electrode mass by at least one electrochemical transformation. The felt is then cut into individual electrodes. (auth)

  13. Nano Design Works: Industry's contact for emerging tech, leading...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Works: Industry's contact for emerging tech, leading tools, and experts Argonne's Nano Design Works gives companies and entrepreneurs the solutions that enable technological ...

  14. Research Led by Sandia Reveals Leading-Edge Erosion Significantly...

    Broader source: Energy.gov (indexed) [DOE]

    Laboratories revealed that leading-edge erosion on wind turbine blades can have a detrimental effect on wind turbine aerodynamic performance within the second year of operation. ...

  15. Indonesia-Low Emissions Asian Development (LEAD) Program | Open...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  16. Thailand-Low Emissions Asian Development (LEAD) Program | Open...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  17. Philippines-Low Emissions Asian Development (LEAD) Program |...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  18. Papua New Guinea-Low Emissions Asian Development (LEAD) Program...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  19. India-Low Emissions Asian Development (LEAD) Program | Open Energy...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  20. Cambodia-Low Emissions Asian Development (LEAD) Program | Open...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  1. Bangladesh-Low Emissions Asian Development (LEAD) Program | Open...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  2. Vietnam-Low Emissions Asian Development (LEAD) Program | Open...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  3. Malaysia-Low Emissions Asian Development (LEAD) Program | Open...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  4. Nepal-Low Emissions Asian Development (LEAD) Program | Open Energy...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  5. Laos-Low Emissions Asian Development (LEAD) Program | Open Energy...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  6. Surface Plasmon Instability Leading to Emission of Radiation...

    Office of Scientific and Technical Information (OSTI)

    Title: Surface Plasmon Instability Leading to Emission of Radiation. Abstract not provided. Authors: Gumbs, Godfrey ; Iurov, Andrii ; Huang, Danhong ; Pan, Wei Publication Date: ...

  7. Lead Research and Development Activity for High Temperature,...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Temperature, Low Relative Humidity Membrane Program Lead Research and Development Activity for High Temperature, Low Relative Humidity Membrane Program A presentation to the High ...

  8. Ames Laboratory to Lead New Research Effort to Address Shortages...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ames Laboratory to Lead New Research Effort to Address Shortages in Rare Earth and Other ... These critical materials, including many rare earth elements, are essential for ...

  9. Testing your home for lead in paint, dust, and soil

    SciTech Connect (OSTI)

    1998-10-01

    This publication is for anyone who is considering having a home or residence tested for lead in paint, dust, or soil by a professional. It explains the technical aspects of lead testing without overwhelming the reader. The first section tells why you would test for lead, the approaches for testing for lead, and what information you will get from each approach. The second section answers specific questions about how paint, soil, and dust sampling are conducted by the professional in your home. Finally, the last section answers other questions about testing, including questions about home test kits and testing of water and ceramics.

  10. Sec. Herrington Leads Delegation in Response to Chernobyl Accident...

    National Nuclear Security Administration (NNSA)

    Photo Gallery Jobs Apply for Our Jobs Our Jobs Working at NNSA Blog Home About Us Our History NNSA Timeline Sec. Herrington Leads Delegation in Response to ... Sec....