Sample records for laughlin steel company

  1. Authorization for Remedial Action at the Former Bliss & Laughlin Steel Company Site, Buffalo, New York

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling7111A Lithologic and Monitor WellAshtabula, Ohio,

  2. Multi-echelon multi-product inventory strategy in a steel company

    E-Print Network [OSTI]

    Iocco, Juan D. (Juan Domingo)

    2009-01-01T23:59:59.000Z

    This thesis examines a distribution multi-echelon production-inventory system subject to stochastic demand in the steel industry. The sponsor company, Ternium (a South American steel producer), needs to provide short service ...

  3. Results of the radiological survey of the Excelsior Steel Ball Company, Tonawanda, New York (TNY005)

    SciTech Connect (OSTI)

    McKenzie, S.P.; Brown, K.S.

    1998-07-01T23:59:59.000Z

    At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted two radiological surveys of property belonging to the Excelsior Steel Ball Company, which is surrounded on three sides by the former site of the Linde Uranium Refinery, Tonawanda, New York. The surveys were performed in September 1997 and February 1998. The purpose of the first survey was to determine if radioactive residuals were present from previous activities at the former Linde site. The Linde Air Products Division of Union Carbide Corporation, Tonawanda, New York, had used radioactive materials at that location for work performed under government contract from 1942 through 1948. The purpose of the second survey was to collect additional biased samples from an area of the site where biased sample results showed slightly elevated levels of thorium-232.

  4. Cuttings Analysis At Fenton Hill HDR Geothermal Area (Laughlin...

    Open Energy Info (EERE)

    navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Cuttings Analysis At Fenton Hill HDR Geothermal Area (Laughlin, Et Al., 1983) Exploration Activity...

  5. Inventory management of steel plates at an oil rig construction company

    E-Print Network [OSTI]

    Tan, Chien Yung

    2006-01-01T23:59:59.000Z

    Keppel Fels produces make-to-order oil exploration rigs for the global market. Each rig requires close to 6000 metric tons of steel in the course of its production. Optimal management of this steel is very critical in this ...

  6. Rossiter-McLaughlin Observations of 55 Cnc e

    E-Print Network [OSTI]

    Lopez-Morales, Mercedes; Rodler, Florian; Dumusque, Xavier; Buchhave, Lars A; Harutyunyan, A; Hoyer, Sergio; Alonso, Roi; Gillon, Michael; Kaib, Nathan A; Latham, David W; Lovis, Christophe; Pepe, Francesco; Queloz, Didier; Raymond, Sean N; Segransan, Damien; Waldmann, Ingo P; Udry, Stephane

    2014-01-01T23:59:59.000Z

    We present Rossiter-McLaughlin observations of the transiting super-Earth 55 Cnc e collected during six transit events between January 2012 and November 2013 with HARPS and HARPS-N. We detect no radial-velocity signal above 35 cm/s (3-sigma) and confine the stellar v sin i to 0.2 +/- 0.5 km/s. The star appears to be a very slow rotator, producing a very low amplitude Rossiter-McLaughlin effect. Given such a low amplitude, the Rossiter-McLaughlin effect of 55 Cnc e is undetected in our data, and any spin-orbit angle of the system remains possible. We also performed Doppler tomography and reach a similar conclusion. Our results offer a glimpse of the capacity of future instrumentation to study low amplitude Rossiter-McLaughlin effects produced by super-Earths.

  7. LWA-0005- Deputy Secretary Decision- In the Matter of Francis M. O'Laughlin

    Broader source: Energy.gov [DOE]

    This is an appeal by complainant Francis O'Laughlin of the Initial Agency Decision by an Office of Hearings and Appeals ("OHA") Hearing Officer who found, following two days of hearings, that the...

  8. City of McLaughlin, South Dakota (Utility Company) | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovationin Urban TransportMartinsville, Virginia (Utility

  9. Truth, Ownership, and Scientific Tradition R. B. Laughlin

    E-Print Network [OSTI]

    Laughlin, Robert B.

    to break the heart. The company has entered a period of extreme financial stress. Layoffs have occurred and licensing agreements. The crisis mitigates. But the crisis has not disappeared, for the claims are false

  10. Embedded Firmware Diversity for Smart Electric Meters Stephen McLaughlin, Dmitry Podkuiko, Adam Delozier

    E-Print Network [OSTI]

    McDaniel, Patrick Drew

    Embedded Firmware Diversity for Smart Electric Meters Stephen McLaughlin, Dmitry Podkuiko, Adam}@cse.psu.edu Abstract Smart meters are now being aggressively deployed world- wide, with tens of millions of meters- niques can limit large-scale attacks on smart meters. We show how current meter designs do not possess

  11. PRECIPITATION HARDENING IN ALUMINUM ALLOY 6022 W.F. Miao and D.E. Laughlin

    E-Print Network [OSTI]

    Laughlin, David E.

    PRECIPITATION HARDENING IN ALUMINUM ALLOY 6022 W.F. Miao and D.E. Laughlin Department of Materials) (Accepted in revised form January 21, 1999) Introduction The use of aluminum alloys for automotive body behavior in aluminum alloy 6022. Experimental Procedure The composition of the 6022 alloy used

  12. The Doppler Shadow of WASP-3b: A tomographic analysis of Rossiter-McLaughlin observations

    E-Print Network [OSTI]

    Miller, G R M; Simpson, E K; Pollacco, D; Enoch, B; Gibson, N P; Queloz, D; Triaud, A H M J; Hébrard, G; Boisse, I; Moutou, C; Skillen, I

    2010-01-01T23:59:59.000Z

    Hot-Jupiter planets must form at large separations from their host stars where the temperatures are cool enough for their cores to condense. They then migrate inwards to their current observed orbital separations. Different theories of how this migration occurs lead to varying distributions of orbital eccentricity and the alignment between the rotation axis of the star and the orbital axis of the planet. The spin-orbit alignment of a transiting system is revealed via the Rossiter-McLaughlin effect, which is the anomaly present in the radial velocity measurements of the rotating star during transit due to the planet blocking some of the starlight. In this paper we aim to measure the spin-orbit alignment of the WASP-3 system via a new way of analysing the Rossiter-McLaughlin observations. We apply a new tomographic method for analysing the time variable asymmetry of stellar line profiles caused by the Rossiter-McLaughlin effect. This new method eliminates the systematic error inherent in previous methods used t...

  13. Company Name: The Timken Company Web Site: http://www.timken.com/en-us/careers/Pages/default.aspx

    E-Print Network [OSTI]

    New Hampshire, University of

    Company Name: The Timken Company Web Site: http, clean steel making, precision manufacturing, metrology, and engineered surfaces and coatings they typically recruit: Engineering Brief description of typical entry-level position: Sales Engineering, Field

  14. Discovery and Rossiter-McLaughlin Effect of Exoplanet Kepler-8b

    E-Print Network [OSTI]

    Jenkins, Jon M; Koch, David G; Marcy, Geoffrey W; Cochran, William D; Basri, Gibor; Batalha, Natalie M; Buchhave, Lars A; Brown, Tim M; Caldwell, Douglas A; Dunham, Edward W; Endl, Michael; Fischer, Debra A; Gautier, Thomas N; Geary, John C; Gilliland, Ronald L; Howell, Steve B; Isaacson, Howard; Johnson, John Asher; Latham, David W; Lissauer, Jack J; Monet, David G; Rowe, Jason F; Sasselov, Dimitar D; Welsh, William F; Howard, Andrew W; MacQueen, Phillip; Chandrasekaran, Hema; Twicken, Joseph D; Bryson, Stephen T; Quintana, Elisa V; Clarke, Bruce D; Li, Jie; Allen, Christopher; Tenenbaum, Peter; Wu, Hayley; Meibom, Soren; Klaus, Todd C; Middour, Christopher K; Cote, Miles T; McCauliff, Sean; Girouard, Forrest R; Gunter, Jay P; Wohler, Bill; Hall, Jennifer R; Ibrahim, Khadeejah; Uddin, AKM Kamal; Wu, Michael S; Bhavsar, Paresh A; Van Cleve, Jeffrey; Pletcher, David L; Dotson, Jessie A; Haas, Michael R

    2010-01-01T23:59:59.000Z

    We report the discovery and the Rossiter-McLaughlin effect of Kepler-8b, a transiting planet identified by the NASA Kepler Mission. Kepler photometry and Keck-HIRES radial velocities yield the radius and mass of the planet around this F8IV subgiant host star. The planet has a radius RP = 1.419 RJ and a mass, MP = 0.60 MJ, yielding a density of 0.26 g cm^-3, among the lowest density planets known. The orbital period is P = 3.523 days and orbital semima jor axis is 0.0483+0.0006/-0.0012 AU. The star has a large rotational v sin i of 10.5 +/- 0.7 km s^-1 and is relatively faint (V = 13.89 mag), both properties deleterious to precise Doppler measurements. The velocities are indeed noisy, with scatter of 30 m s^-1, but exhibit a period and phase consistent with the planet implied by the photometry. We securely detect the Rossiter-McLaughlin effect, confirming the planet's existence and establishing its orbit as prograde. We measure an inclination between the projected planetary orbital axis and the projected stell...

  15. People of Steel: The Support of a Town during the Homestead Strike

    E-Print Network [OSTI]

    Partida, Jason

    2013-01-01T23:59:59.000Z

    the riot between the steel strikers and the Pinkertons afterNovember 19, 1892. People of Steel 126 The position you1892, between the Carnegie Steel Company, Limited, and the

  16. IMPROVED MODELING OF THE ROSSITER-McLAUGHLIN EFFECT FOR TRANSITING EXOPLANETS

    SciTech Connect (OSTI)

    Hirano, Teruyuki; Winn, Joshua N.; Albrecht, Simon [Department of Physics, and Kavli Institute for Astrophysics and Space Research, Massachusetts Institute of Technology, Cambridge, MA 02139 (United States); Suto, Yasushi; Taruya, Atsushi [Department of Physics, University of Tokyo, Tokyo 113-0033 (Japan); Narita, Norio [National Astronomical Observatory of Japan, 2-21-1 Osawa, Mitaka, Tokyo 181-8588 (Japan); Sato, Bun'ei, E-mail: hirano@utap.phys.s.u-tokyo.ac.jp [Department of Earth and Planetary Sciences, Tokyo Institute of Technology, 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8551 (Japan)

    2011-12-01T23:59:59.000Z

    We present an improved formula for the anomalous radial velocity of the star during planetary transits due to the Rossiter-McLaughlin (RM) effect. The improvement comes from a more realistic description of the stellar absorption line profiles, taking into account stellar rotation, macroturbulence, thermal broadening, pressure broadening, and instrumental broadening. Although the formula is derived for the case in which radial velocities are measured by cross-correlation, we show through numerical simulations that the formula accurately describes the cases where the radial velocities are measured with the iodine absorption-cell technique. The formula relies on prior knowledge of the parameters describing macroturbulence, instrumental broadening, and other broadening mechanisms, but even 30% errors in those parameters do not significantly change the results in typical circumstances. We show that the new analytic formula agrees with previous ones that had been computed on a case-by-case basis via numerical simulations. Finally, as one application of the new formula, we reassess the impact of the differential rotation on the RM velocity anomaly. We show that differential rotation of a rapidly rotating star may have a significant impact on future RM observations.

  17. DISCOVERY AND ROSSITER-McLAUGHLIN EFFECT OF EXOPLANET KEPLER-8b

    SciTech Connect (OSTI)

    Jenkins, Jon M.; Caldwell, Douglas A. [SETI Institute/NASA Ames Research Center, Moffett Field, CA 94035 (United States); Borucki, William J.; Koch, David G. [NASA Ames Research Center, Moffett Field, CA 94035 (United States); Marcy, Geoffrey W.; Basri, Gibor; Isaacson, Howard [University of California Berkeley, Berkeley, CA 94720 (United States); Cochran, William D.; Endl, Michael [University of Texas, Austin, TX 78712 (United States); Welsh, William F. [San Diego State University, San Diego, CA 92182 (United States); Batalha, Natalie M. [San Jose State University, San Jose, CA 95192 (United States); Buchhave, Lars A.; Geary, John C. [Harvard-Smithsonian Center for Astrophysics, Cambridge, MA 02138 (United States); Brown, Timothy M. [Las Cumbres Observatory Global Telescope, Goleta, CA 93117 (United States); Dunham, Edward W. [Lowell Observatory, Flagstaff, AZ 86001 (United States); Fischer, Debra A. [Radcliffe Institute, Cambridge, MA (United States); Gautier, Thomas N. [Jet Propulsion Laboratory/California Institute of Technology, Pasadena, CA 91109 (United States); Gilliland, Ronald L. [Space Telescope Science Institute, Baltimore, MD 21218 (United States); Howell, Steve B. [National Optical Astronomy Observatory, Tucson, AZ 85719 (United States); Johnson, John Asher, E-mail: Jon.Jenkins@nasa.go [California Institute of Technology, Pasadena, CA 91109 (United States)

    2010-12-01T23:59:59.000Z

    We report on the discovery and the Rossiter-McLaughlin (R-M) effect of Kepler-8b, a transiting planet identified by the NASA Kepler Mission. Kepler photometry and Keck-HIRES radial velocities yield the radius and mass of the planet around this F8IV subgiant host star. The planet has a radius R{sub P} = 1.419 R{sub J} and a mass M{sub P} = 0.60 M{sub J}, yielding a density of 0.26 g cm{sup -3}, one of the lowest planetary densities known. The orbital period is P = 3.523 days and the orbital semimajor axis is 0.0483{sup +0.0006}{sub -0.0012} AU. The star has a large rotational vsin i of 10.5 {+-} 0.7 km s{sup -1} and is relatively faint (V {approx} 13.89 mag); both properties are deleterious to precise Doppler measurements. The velocities are indeed noisy, with scatter of 30 m s{sup -1}, but exhibit a period and phase that are consistent with those implied by transit photometry. We securely detect the R-M effect, confirming the planet's existence and establishing its orbit as prograde. We measure an inclination between the projected planetary orbital axis and the projected stellar rotation axis of {lambda} = -26.{sup 0}4 {+-} 10.{sup 0}1, indicating a significant inclination of the planetary orbit. R-M measurements of a large sample of transiting planets from Kepler will provide a statistically robust measure of the true distribution of spin-orbit orientations for hot Jupiters around F and early G stars.

  18. Weak turbulence and collapses in the Majda-Mc-Laughlin-Tabak equation: Fluxes in wavenumber and in amplitude space

    E-Print Network [OSTI]

    Benno Rumpf Laura Biven

    2005-03-04T23:59:59.000Z

    The turbulent energy flow of the onedimensional Majda-McLaughlin-Tabak equation is studied numerically. The system exhibits weak turbulence for weak driving forces, while weak turbulence coexists with strongly nonlinear intermittent collapses when the system is strongly driven. These two types of dynamics can be distinguished by their energy and particle fluxes. The weakly turbulent process can be characterized by fluxes in wavenumber space, while additional fluxes in amplitude space emerge in the intermittent process. The particle flux is directed from low amplitudes towards high amplitudes, and the energy flows in the opposite direction.

  19. Mr. Thomas Mahl Granite City Steel Company

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA groupTuba City, Arizona, DisposalFourth Five-Year38Report3DepartmentE-23

  20. Modelling spot and forward prices for energy companies

    E-Print Network [OSTI]

    Bhulai, Sandjai

    Modelling spot and forward prices for energy companies Dafydd Steele MSc Stochastics and Financial forward and spot prices for energy com- panies. The two main ways of modelling power prices are stochastic Mathematics dafydd.steele@edf-energy.com August 5, 2010 #12;Abstract The focus of this thesis is on modelling

  1. Investment companies

    E-Print Network [OSTI]

    Sauer, Edward F

    1961-01-01T23:59:59.000Z

    stockholder challenged the management fee paid to F. Eberstadt & Co. , Inc. , manager and distributor of Chemical Fund. The court dismissed the case on the grounds that excessive fees had not been proved. This case, however, could hardly be considered a... Tax-Exempt Bond Funds. . . . . . . . Daily Pricing of Mutual Investment Company Shares. 56 57 59 59 60 iv Management Fees. . . . . Tax-Free Exchange Funds . 61 62 V. CONCLUSIONS 63 BIBLIOGRAPHY GLOSSARY OF TERMS Balanced fund...

  2. Innovation in mature industries : recent impacts of the oil & gas and automobile technological trends on the steel industry

    E-Print Network [OSTI]

    Tivelli, Marco M. (Marco Mario), 1964-

    2004-01-01T23:59:59.000Z

    In order to survive, the steel industry has undergone traumatic changes in the last years. A thirty years old overcapacity combined with a slow growing market led to a steadily eroding profitability of steel companies, ...

  3. Competitor Analysis Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    chemical company providing the household and industrial detergent, personal care, lubricant, oilfield

  4. Consumer Products Companies Company Website Headquarters

    E-Print Network [OSTI]

    McGaughey, Alan

    . www.coach.com New York, NY Coca-Cola Company www.thecoca-colacompany.com Atlanta, GA Cole & Ashcroft L

  5. Gas Companies Program (Tennessee)

    Broader source: Energy.gov [DOE]

    The Gas Companies program is a set of rules that encourage the development of the natural gas industry in Tennessee. They empower gas companies to lay piped and extend conductors through the...

  6. Market Research Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    development - Market research for enterprise and education adoption - Plan and execute a company-wide pingMarket Research Company Description: A company focused on developing web-based graphical and future products and then develop the necessary strategies and collateral to stay on the bleeding edge

  7. QER- Comment of Southern Company

    Broader source: Energy.gov [DOE]

    Southern Company Services, Inc., as agent for Alabama Power Company, Georgia Power Company, Gulf Power Company, and Mississippi Power Company, (collectively, “Southern Companies”), are pleased to hereby provide their comments to the Department of Energy as it prepares the Quadrennial Energy Review. If there is anything else that we can do in this regard, please feel free to contact us.

  8. Capital Reporting Company Quadrennial ...

    Office of Environmental Management (EM)

    3 05-27-2014 (866) 448 - DEPO www.CapitalReportingCompany.com 2014 1 QUADRENNIAL ENERGY REVIEW STAKEHOLDER MEETING 3 PETROLEUM TRANSMISSION, STORAGE AND DISTRIBUTION ISSUES...

  9. Capital Reporting Company Quadrennial ...

    Broader source: Energy.gov (indexed) [DOE]

    (866) 448 - DEPO www.CapitalReportingCompany.com 2014 1 UNITED STATES DEPARTMENT OF ENERGY OFFICE OF ENERGY POLICY AND SYSTEMS ANALYSIS QUADRENNIAL ENERGY REVIEW STAKEHOLDER...

  10. Capital Reporting Company Quadrennial ...

    Broader source: Energy.gov (indexed) [DOE]

    - DEPO www.CapitalReportingCompany.com 2014 1 UNITED STATE OF AMERICA DEPARTMENT OF ENERGY ---: : IN RE: : : QUADRENNIAL ENERGY REVIEW : : NEW...

  11. Energy Service Companies

    Broader source: Energy.gov [DOE]

    Energy service companies (ESCOs) develop, design, build, and fund projects that save energy, reduce energy costs, decrease operations and maintenance costs at their customers' facilities.

  12. Laughlin Meeting Transcripts | A

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently Asked Questions for DOEtheInspection15Department10PM toON5LandLasting Gifts

  13. ITP Steel: Theoretical Minimum Energies to Produce Steel for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Theoretical Minimum Energies to Produce Steel for Selected Conditions, March 2000 ITP Steel: Theoretical Minimum Energies to Produce Steel for Selected Conditions, March 2000...

  14. Auto/Steel Partnership: Advanced High-Strength Steel Research...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced High-Strength Steel Research and Development AutoSteel Partnership: Advanced High-Strength Steel Research and Development 2009 DOE Hydrogen Program and Vehicle...

  15. ITP Steel: Steel Industry Marginal Opportunity Study September...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Steel Industry Marginal Opportunity Study September 2005 ITP Steel: Steel Industry Marginal Opportunity Study September 2005 steelmarginalopportunity.pdf More Documents &...

  16. Marketing Plan Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    productivity without the jitters/crash of normal energy drinks and shots. Short Project Name: Internet groups would generate the most profit? How can we cross-market/up-sell to our email database and 20K the model) Company Description: We are a rapidly growing, subscription-based, finance and technology company

  17. Public Service Companies, General Provisions (Virginia)

    Broader source: Energy.gov [DOE]

    Public Service Companies includes gas, pipeline, electric light, heat, power and water supply companies, sewer companies, telephone companies, and all persons authorized to transport passengers or...

  18. Ultrahigh carbon steels, Damascus steels, and superplasticity

    SciTech Connect (OSTI)

    Sherby, O.D. [Stanford Univ., CA (United States). Dept. of Materials Science and Engineering; Wadsworth, J. [Lawrence Livermore National Lab., CA (United States)

    1997-04-01T23:59:59.000Z

    The processing properties of ultrahigh carbon steels (UHCSs) have been studied at Stanford University over the past twenty years. These studies have shown that such steels (1 to 2.1% C) can be made superplastic at elevated temperature and can have remarkable mechanical properties at room temperature. It was the investigation of these UHCSs that eventually brought us to study the myths, magic, and metallurgy of ancient Damascus steels, which in fact, were also ultrahigh carbon steels. These steels were made in India as castings, known as wootz, possibly as far back as the time of Alexander the Great. The best swords are believed to have been forged in Persia from Indian wootz. This paper centers on recent work on superplastic UHCSs and on their relation to Damascus steels. 32 refs., 6 figs.

  19. MACHINE AND FOUNDRY COMPANY

    Office of Legacy Management (LM)

    MACHINE AND FOUNDRY COMPANY kt '- : :' ENGINEERING DIVISIOJ ---. Cl FIELD iRIP ,REP@?T ,' i;:z;zy MEETING REPORT : .I.-.-' Y ::,:I :. &, .I7 ENGINEERING REPORT- : T, ...

  20. Capital Reporting Company Quadrennial ...

    Energy Savers [EERE]

    11-2014 (866) 448 - DEPO www.CapitalReportingCompany.com 2014 1 QUADRENNIAL ENERGY REVIEW PUBLIC MEETING 10: Infrastructure Constraints Monday, August 11, 2014 New Mexico State...

  1. Capital Reporting Company Quadrennial ...

    Office of Environmental Management (EM)

    07-21-2014 (866) 448 - DEPO www.CapitalReportingCompany.com 2014 1 QUADRENNIAL ENERGY REVIEW PUBLIC MEETING 6 MONDAY, JULY 21, 2014 HELD AT: RASHID AUDITORIUM-HILLMAN CENTER...

  2. Capital Reporting Company Quadrenntial ...

    Broader source: Energy.gov (indexed) [DOE]

    Quadrenntial Energy Review 04-21-2014 (866) 448 - DEPO www.CapitalReportingCompany.com 2014 1 NEW ENGLAND REGIONAL INFRASTRUCTURE CONSTRAINTS A Public Meeting on the Quadrennial...

  3. Supporting steel

    SciTech Connect (OSTI)

    Badra, C. [International Trade Commission, Washington, DC (United States)

    1995-10-01T23:59:59.000Z

    The US Department of Energy (DOE) and the American Iron and Steel Institute (AISI) have just completed a pilot program on the technical and economic viability of direct ironmaking by a process based on bath smelting. In this process, oxygen, prereduced iron ore pellets, coal, and flux are charged into a molten slag bath containing a high percentage of carbon. The carbon removes oxygen from the iron ore and generates carbon monoxide and liquid iron. Oxygen is then injected to burn some of the carbon monoxide gas before it leaves the smelting vessel. The partially combusted gas is sued to preheat and prereduced the ore before it is injected into the bath. There are several competing cokeless ironmaking processes in various stages of development around the world. A brief comparison of these processes provides a useful perspective with which to gauge the progress and objectives of the AISI-DOE research initiative. The principal competing foreign technologies include the Corex process, DIOS, HIsmelt, and Jupiter. The advantages of the direct ironmaking process examined by AISI-DOE were not sufficiently demonstrated to justify commercialization without further research. However, enough knowledge was gained from laboratory and pilot testing to teach researchers how to optimize the direct ironmaking process and to provide the foundation for future research. Researchers now better understand issues such as the dissolution of materials, reduction mechanisms and rates, slag foaming and control, the behavior of sulfur, dust generation, and the entire question of energy efficiency--including post combustion and the role of coal/volatile matter.

  4. Mr. Frank Iannizzara Engineering Department Copperweld Steel Company

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling7 August 2008 Office7-TACi+ r*yCont'dl..,

  5. Comminuting irradiated ferritic steel

    DOE Patents [OSTI]

    Bauer, Roger E. (Kennewick, WA); Straalsund, Jerry L. (Kennewick, WA); Chin, Bryan A. (Auburn, AL)

    1985-01-01T23:59:59.000Z

    Disclosed is a method of comminuting irradiated ferritic steel by placing the steel in a solution of a compound selected from the group consisting of sulfamic acid, bisulfate, and mixtures thereof. The ferritic steel is used as cladding on nuclear fuel rods or other irradiated components.

  6. Applications and experiences with super duplex stainless steel in wet FGD scrubber systems

    SciTech Connect (OSTI)

    Francis, R.; Byrne, G.; Warburton, G.; Hebdon, S. [Weir Materials Ltd., Manchester (United Kingdom)

    1998-12-31T23:59:59.000Z

    The paper presents the properties of the author`s company`s proprietary super duplex stainless steel. Work is presented showing the development of a more realistic laboratory solution representing typical limestone slurries found in real flue gas desulfurization (FGD) systems. The importance of additions of metal ions such as Fe{sup 3+} and Mn{sup 2+} as well as partially oxidized sulfur species is demonstrated. Results are presented comparing the crevice corrosion resistance of super duplex stainless steel in these slurries with other commonly used wrought and cast stainless steels, for both simulated anthracite and lignite type slurries. Data from loop tests on the erosion resistance of a range of alloys in simulated FGD slurries is presented. The results clearly show the superior resistance of super duplex stainless steel to both crevice corrosion and erosion in FGD slurries. Finally the experiences in UK FGD systems with both cast and wrought super duplex stainless steel are presented.

  7. Methods of forming steel

    DOE Patents [OSTI]

    Branagan, Daniel J. (Iona, ID); Burch, Joseph V. (Shelley, ID)

    2001-01-01T23:59:59.000Z

    In one aspect, the invention encompasses a method of forming a steel. A metallic glass is formed and at least a portion of the glass is converted to a crystalline steel material having a nanocrystalline scale grain size. In another aspect, the invention encompasses another method of forming a steel. A molten alloy is formed and cooled the alloy at a rate which forms a metallic glass. The metallic glass is devitrified to convert the glass to a crystalline steel material having a nanocrystalline scale grain size. In yet another aspect, the invention encompasses another method of forming a steel. A first metallic glass steel substrate is provided, and a molten alloy is formed over the first metallic glass steel substrate to heat and devitrify at least some of the underlying metallic glass of the substrate.

  8. Company Level Imports Archives

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40Coal Stocks at CommercialDecadeReservesYear21Company Level Imports Company Level

  9. Analytic models of the Rossiter-McLaughlin effect for arbitrary eclipser/star size ratios and arbitrary multiline stellar spectra

    E-Print Network [OSTI]

    Baluev, Roman V

    2015-01-01T23:59:59.000Z

    We present an attempt to improve models of the Rossiter-McLaughlin effect by relaxing several restrictive assumptions. For our main model of the Doppler anomaly, we consider the entire multiline stellar spectrum rather than just a single line, use no assumptions about the shape of the lines profiles, and allow arbitrary size ratio for the star and its eclipser. However, we neglect the effect of macro-turbulence and differential rotation. We construct our model as a power series in the stellar rotation velocity, $V\\sin i$, giving a closed set of analytic formulae for up to three terms, and assuming quadratic limb-darkening law. We consider three major approaches of determining the Doppler shift: cross-correlation with a predefined template, cross-correlation with an out-of-transit stellar spectrum, and parametric modelling of the spectrum. We reveal that the Doppler anomaly has an additional first-order (in $V\\sin i$) correction term, while previous works primarily deal with only a second-order correction. Thi...

  10. Hiring Company: Chevron Oronite Technology Group, a Chevron Company

    E-Print Network [OSTI]

    Southern California, University of

    additives for fuels and lubricating oils. We are a Global company and a subsidiary of Chevron Corporation

  11. No Company Is An Island

    E-Print Network [OSTI]

    Maddox, A.

    No company is an island. Utilities and their industrial customers are discovering that collaboration can breed opportunity while isolation can lead to ruin. Inter company relationships have changed over recent years and HL&P and its customers...

  12. Benham Companies ESCO Qualification Sheet

    Broader source: Energy.gov [DOE]

    Document outlines the energy service company (ESCO) qualifications for Leidos Engineering (part of Benham Companies) in relation to the U.S. Department of Energy's (DOE) energy savings performance contracts (ESPC).

  13. A steel trap | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    physical and chemical interactions in metallic elements, such as the irradiated ODS steels used in this study. The APT work revealed clear images of the nanoclusters for...

  14. JournalofNuclear Materials 85 & 86(1979)57-64 0 North-HollandPublishingCompany

    E-Print Network [OSTI]

    Abdou, Mohamed

    JournalofNuclear Materials 85 & 86(1979)57-64 0 North-HollandPublishingCompany A COMPARATIVE STUDY OF THE PERFORMANCE AND ECONOMICS OF ADVANCED AND CONVENTIONAL STRUCTURAL MATERIALS IN FUSION SYSTEMS* M. A. ABDOU, Z material on tokamak reactor economics was investigated and a comparative study of stainless steel

  15. Regional companies eye growth

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Scienceand Requirements Recently Approved JustificationBio-Inspired PowerRegional companies eye

  16. Use of explosives to demolish multistory steel frame buildings

    E-Print Network [OSTI]

    Landry, Charles Vernon

    1988-01-01T23:59:59.000Z

    of Explosives Engineers. The articles dealt with the state-of-the-art, covering many peripheral subjects of the use of explosives to demolish steel framed multistory buildings. The most extensive literature available on controlled demolition techniques... with the exception of several articles presented to the Annual Proceedings of the Society of Explosives Engineers and a few U. S. government studies on the use of explosives. In depth interviews were conducted with controlled explosive demolition companies...

  17. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    Photovoltaics Spain S L REPS Renewable Energies and Photovoltaics Spain S L REPS Spain Solar Spanish solar project developer The firm is a subsidiary of Norwegian energy company...

  18. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    significantly better heating efficiency than conventional coiled wire elements A O Smith A O Smith Wisconsin Efficiency Solar Wisconsin based based company that makes both...

  19. Kansas Certified Development Companies (Kansas)

    Broader source: Energy.gov [DOE]

    Kansas Certified Development Companies (CDC) assist businesses by developing loan packages that meet the financial need of a project. These packages often contain multiple sources of project...

  20. Regulations For Gas Companies (Tennessee)

    Broader source: Energy.gov [DOE]

    The Regulations for Gas Companies, implemented by the Tennessee Regulatory Authority (Authority) outline the standards for metering, distribution and electricity generation for utilities using gas....

  1. Aditya A. Shah Deere & Company,

    E-Print Network [OSTI]

    Aditya A. Shah Deere & Company, Dubuque, IA 52001 e-mail: shahadityaa@johndeere.com Christiaan J. J 30332 e-mail: chris.paredis@me.gatech.edu Roger Burkhart Deere & Company, Moline, IL 61265 e it to an example of a hydraulic log splitter. Based on this initial example, we discuss two advantages

  2. Ris-R-1244(EN) Tool Steels

    E-Print Network [OSTI]

    -resistant steels 18 5.5 Hot-work steels 18 5.6 Cold-work steels 19 5.7 High-speed steels (HSSs) 20 Appendix 1 and chromium) furthermore some steel types contains cobalt, which respectively raises the temperature at which.1 Water-hardening steels 17 5.2 Low-alloy special purpose steels 17 5.3 Mould steels 18 5.4 Shock

  3. Clean steels for fusion

    SciTech Connect (OSTI)

    Gelles, D.S.

    1995-03-01T23:59:59.000Z

    Fusion energy production has an inherent advantage over fission: a fuel supply with reduced long term radioactivity. One of the leading candidate materials for structural applications in a fusion reactor is a tungsten stabilized 9% chromium Martensitic steel. This alloy class is being considered because it offers the opportunity to maintain that advantage in the reactor structure as well as provide good high temperature strength and radiation induced swelling and embrittlement resistance. However, calculations indicate that to obtain acceptable radioactivity levels within 500 years after service, clean steel will be required because the niobium impurity levels must be kept below about 2 appm and nickel, molybdenum, nitrogen, copper, and aluminum must be intentionally restricted. International efforts are addressing the problems of clean steel production. Recently, a 5,000 kg heat was vacuum induction melted in Japan using high purity commercial raw materials giving niobium levels less than 0.7 appm. This paper reviews the need for reduced long term radioactivity, defines the advantageous properties of the tungsten stabilized Martensitic steel class, and describes the international efforts to produce acceptable clean steels.

  4. Continuous steel production and apparatus

    DOE Patents [OSTI]

    Peaslee, Kent D. (Rolla, MO); Peter, Jorg J. (McMinnville, OR); Robertson, David G. C. (Rolla, MO); Thomas, Brian G. (Champaign, IL); Zhang, Lifeng (Trondheim, NO)

    2009-11-17T23:59:59.000Z

    A process for continuous refining of steel via multiple distinct reaction vessels for melting, oxidation, reduction, and refining for delivery of steel continuously to, for example, a tundish of a continuous caster system, and associated apparatus.

  5. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    HF ReEnergy has focused its most recent efforts on the desire to create grid quality electricity from landfill waste The company also plans to focus on making existing coal plants...

  6. A variety of opportunities exist for geology graduates in the private and public sectors and in education. Petroleum companies, petroleum service companies, mining companies,

    E-Print Network [OSTI]

    and in education. Petroleum companies, petroleum service companies, mining companies, power companies, computer software companies, and entrepreneurs hire geologists for exploration, development, mining, production, hydrologist, mining geologist, oceanographer, production geologist, researcher, resource evaluator

  7. A variety of opportunities exist for geology graduates in the private and public sectors and in education. Petroleum companies, petroleum service companies, mining companies,

    E-Print Network [OSTI]

    and in education. Petroleum companies, petroleum service companies, mining companies, power companies, computer software companies, and entrepreneurs hire geologists for exploration, development, mining, production geologist, geologist, geophysicist, hydrologist, mining geologist, oceanographer, production geologist

  8. New Business Opportunity Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    report and analysis Company Description: A billion dollar, middle market private equity firm. We just trading and transaction comps from relevant databases. Assist in valuing new deals and marking to market organization of radiant heating

  9. energy company opens American branch

    E-Print Network [OSTI]

    Lin, C.-Y. Cynthia

    in clean-energy investment and delivering unique projects and innovative products and servicesenergy company opens American branch in West Sacramento Substainible energy for sustainable energy supply. Ecostream markets such things as solar roof panel installations and other long

  10. How companies can leverage crowdsourcing

    E-Print Network [OSTI]

    Cheung, Sunny

    2012-01-01T23:59:59.000Z

    Crowdsourcing is an increasingly popular phenomenon where companies solicit the help of the public in helping accomplish some of the activities commonly performed by employees or contractors. These activities can range ...

  11. The valuation of construction companies

    E-Print Network [OSTI]

    Sassine, Edmond, 1980-

    2004-01-01T23:59:59.000Z

    The main objective of this thesis is to study the valuation of construction companies in mergers and acquisitions. The thesis is divided into three main parts; Mergers and Acquisitions, Valuation, and a Case Study. Mergers ...

  12. Deere & Company Energy Management Program 

    E-Print Network [OSTI]

    Darby, D. F.

    1981-01-01T23:59:59.000Z

    An overview of the Deere & Company Energy Management Program is discussed. A review is made of seven key elements which have contributed to the success of the program. Installed projects and established programs are identified and discussed...

  13. Reaustenitisation from Bainite in Steels

    E-Print Network [OSTI]

    Takahashi, Manabu

    1993-03-16T23:59:59.000Z

    .7 APPLICATIONS . . . 1.7.1 Ferrite-Martensite dual phase steels 1.7.2 Steels containing some retained austenite 1.7.3 Welding of steels . . . . . . . . . . 1.7.4 Initial austenite grain size . . . . . . . 1.8 TRANSFORMATION FROM AUSTENITE 1.8.1 Widmanstiitten... is important in the production of dual phase steels which have a final microstructure of ferrite and about 20% martensite. These steels have a good combination of strength and uniform ductility, and find applications in the automobile industry. When a fully...

  14. Eastern Kodak Company

    SciTech Connect (OSTI)

    Y.S. Tyan

    2009-06-30T23:59:59.000Z

    Lighting consumes more than 20% of electricity generated in the United States. Solid state lighting relies upon either inorganic or organic light-emitting diodes (OLEDs). OLED devices because of their thinness, fast response, excellent color, and efficiency could become the technology of choice for future lighting applications, provided progress is made to increase power efficiency and device lifetime and to develop cost-effective manufacturing processes. As a first step in this process, Eastman Kodak Company has demonstrated an OLED device architecture having an efficacy over 50 lm/W that exceeds the specifications of DOE Energy Star Program Requirements for Solid State Lighting. The project included work designed to optimize an OLED device, based on a stacked-OLED structure, with performance parameters of: low voltage; improved light extraction efficiency; improved internal quantum efficiency; and acceptable lifetime. The stated goal for the end of the project was delivery of an OLED device architecture, suitable for development into successful commercial products, having over 50 lum/W power efficiency and 10,000 hours lifetime at 1000 cd/m{sup 2}. During the project, Kodak developed and tested a tandem hybrid IES device made with a fluorescent blue emitter, a phosphorescent yellow emitter, and a phosphorescent red emitter in a stacked structure. The challenge was to find low voltage materials that do not absorb excessive amounts of emitted light when the extraction enhancement structure is applied. Because an extraction enhancement structure forces the emitted light to travel several times through the OLED layers before it is emitted, it exacerbates the absorption loss. A variety of ETL and HTL materials was investigated for application in the low voltage SSL device structure. Several of the materials were found to successfully yield low operating device voltages without incurring excessive absorption loss when the extraction enhancement structure was applied. An internal extraction layer comprises two essential components: a light extraction element (LEE) that does the actual extraction of emitted light and a light coupling layer (LCL) that allows the emitted light to interact with the extraction element. Modeling results show that the optical index of the LCL needs to be high, preferably higher than that of the organic layers with an n value of {approx}1.8. In addition, since the OLED structure needs to be built on top of it the LCL needs to be physically and chemically benign. As the project concluded, our focus was on the tandem hybrid device, which proved to be the more efficient architecture. Cost-efficient device fabrication will provide the next challenges with this device architecture in order to allow this architecture to be commercialized.

  15. Testing of the 3M Company ACCR Conductor

    SciTech Connect (OSTI)

    Stovall, J.P.; RIzy, D.T.; Kisner, R.A.; Deve, H.E. (3M Comp.)

    2010-09-15T23:59:59.000Z

    The 3M Company has developed a high-temperature low-sag conductor referred to as Aluminum- Conductor Composite-Reinforced or ACCR. The conductor uses an aluminum metal matrix material to replace the steel in conventional conductors so the core has a lower density and higher conductivity. The objective of this work is to accelerate the commercial acceptance by electric utilities of these new conductor designs by testing four representative conductor classes in controlled conditions. Overhead transmission lines use bare aluminum conductor strands wrapped around a steel core strands to transmit electricity. The typical cable is referred to as aluminum-conductor steel-reinforced (ACSR). The outer strands are aluminum, chosen for its conductivity, low weight, and low cost. The center strand is of steel for the strength required to support the weight without stretching the aluminum due to its ductility. The power density of a transmission corridor has been directly increased by increasing the voltage level. Transmission voltages have increased from 115-kV to 765- kV over the past 80 years. In the United States, further increasing the voltage level is not feasible at this point in time, so in order to further increase the power density of a transmission corridor, conductor designs that increase the current carrying capability have been examined. One of the key limiting factors in the design of a transmission line is the conductor sag which determines the clearance of the conductor above ground or underlying structures needed for electrical safety. Increasing the current carrying capability of a conductor increases the joule heating in the conductor which increases the conductor sag. A conductor designed for high-temperature and lowsag operation requires an engineered modification of the conductor materials. To make an advanced cable, the 3M Company solution has been the development of a composite conductor consisting of Nextel ceramic fibers to replace the steel core and an aluminum-zirconium alloy to improve the outer strands. The result is a cable that can carry more current than steelaluminum lines without sagging as much at higher temperatures. A unique facility called the Powerline Conductor Accelerated Testing (PCAT) Facility was built at ORNL for testing overhead conductors. The PCAT has been uniquely designed for testing overhead bare transmission line conductors at high currents and temperatures after they have been installed and tensioned to the manufacturer's specifications. The ability to operate a transmission line conductor in this manner does not exist elsewhere in the United States. Four classes of ACCR cable designed by 3M have been successfully test at ORNL – small, medium, large and small/compact. Based on these and other manufacturer tests, the 3M Company has successfully introduced the ACCR into the commercial market and has completed over twenty installations for utility companies.

  16. Natural gas annual 1993 supplement: Company profiles

    SciTech Connect (OSTI)

    Not Available

    1995-02-01T23:59:59.000Z

    The Natural Gas Annual provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. This report, the Natural Gas Annual 1993 Supplement: Company Profiles, presents a detailed profile of 45 selected companies in the natural gas industry. The purpose of this report is to show the movement of natural gas through the various States served by the companies profiled. The companies in this report are interstate pipeline companies or local distribution companies (LDC`s). Interstate pipeline companies acquire gas supplies from company owned production, purchases from producers, and receipts for transportation for account of others. Pipeline systems, service area maps, company supply and disposition data are presented.

  17. Process for dezincing galvanized steel

    DOE Patents [OSTI]

    Morgan, William A. (Hamilton, CA); Dudek, Frederick J. (Arlington Heights, IL); Daniels, Edward J. (Oak Lawn, IL)

    1998-01-01T23:59:59.000Z

    A process for removing zinc from galvanized steel. The galvanized steel is immersed in an electrolyte containing at least about 15% by weight of sodium or potassium hydroxide and having a temperature of at least about 75.degree. C. and the zinc is galvanically corroded from the surface of the galvanized steel. The material serving as the cathode is principally a material having a standard electrode potential which is intermediate of the standard electrode potentials of zinc and cadmium in the electrochemical series. The corrosion rate may be accelerated by (i) increasing the number density of corrosion sites in the galvanized steel by mechanically abrading or deforming the galvanized steel, (ii) heating the galvanized steel to form an alloy of zinc on the surface of the galvanized steel, (iii) mixing the galvanized steel with a material having a standard electrode potential which is intermediate of the standard electrode potentials of zinc and cadmium in the electrochemical series, or (iv) moving the galvanized steel relative to itself and to the electrolyte while immersed in the electrolyte.

  18. Sandia National Laboratories: stainless steel

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    stainless steel Sandia-California Partners with Japanese National Institute of Advanced Industrial Science and Technology (AIST) in Hydrogen-Materials Research On July 26, 2013, in...

  19. Process for dezincing galvanized steel

    DOE Patents [OSTI]

    Morgan, W.A.; Dudek, F.J.; Daniels, E.J.

    1998-07-14T23:59:59.000Z

    A process is described for removing zinc from galvanized steel. The galvanized steel is immersed in an electrolyte containing at least about 15% by weight of sodium or potassium hydroxide and having a temperature of at least about 75 C and the zinc is galvanically corroded from the surface of the galvanized steel. The material serving as the cathode is principally a material having a standard electrode potential which is intermediate of the standard electrode potentials of zinc and cadmium in the electrochemical series. The corrosion rate may be accelerated by (1) increasing the number density of corrosion sites in the galvanized steel by mechanically abrading or deforming the galvanized steel, (2) heating the galvanized steel to form an alloy of zinc on the surface of the galvanized steel, (3) mixing the galvanized steel with a material having a standard electrode potential which is intermediate of the standard electrode potentials of zinc and cadmium in the electrochemical series, or (4) moving the galvanized steel relative to itself and to the electrolyte while immersed in the electrolyte. 1 fig.

  20. Spider Silk: Sronger than Steel? Nature's Supermaterial

    E-Print Network [OSTI]

    Powers, Alexander

    2013-01-01T23:59:59.000Z

    spider silk were as thick as a steel beam, it would be verysized and much heavier steel. In fact, it would take aboutstrength comparable to that of steel, about 1.5 gigapascals,

  1. Imagining Chivalry: Charles V's Suits of Steel

    E-Print Network [OSTI]

    Machado, Erin Jeannine

    2012-01-01T23:59:59.000Z

    Mail, German, 15 th century. Steel and brass. MetropolitanI. , Innsbruck, ca. 1512-14. Steel, gilded silver, velvet,Elector of Saxony, ca. 1555. Steel, copper alloy (brass),

  2. Oil and Gas Company Oil and Gas Company Address Place Zip Website

    Open Energy Info (EERE)

    Dhahran Saudi Arabia http www saudiaramco com en home html Saudi Aramco Mobile Refinery Company SAMREF Saudi Aramco Mobile Refinery Company SAMREF P O Box Yanbu S audi...

  3. Reed-Joseph International Company

    E-Print Network [OSTI]

    is offering field downloadable GPS/VHF logging collars and Solar Powered GPS/VHF backpack loggers for birds of battery powered and solar powered PTTs in a wide range of sizes, exclusively for birds. We will startReed-Joseph International Company 55 YEARS OF EXCELLENCE IN BIRD AND WILDLIFE CONTROL THE U

  4. IBM Software Lincoln Trust Company

    E-Print Network [OSTI]

    into account several "lessons learned" from the company's past pre-divestiture past. A process improve- ment team had existed several years prior, but was decommissioned due to lack of meaningful automation, there were also lessons from the past that needed to be integrated into the new program. Prior attempts

  5. Energy Management at Deere & Company 

    E-Print Network [OSTI]

    Boyd, M. P.

    1979-01-01T23:59:59.000Z

    Deere & Company appreciates the opportunity to discuss energy management and conservation with you. Energy is a topic that will occupy our thoughts for many years to come and certainly will be in the forefront in the near future. It is a subject...

  6. Natural gas annual 1992: Supplement: Company profiles

    SciTech Connect (OSTI)

    Not Available

    1994-01-01T23:59:59.000Z

    The data for the Natural Gas Annual 1991 Supplement : Company Profiles are taken from Form EIA-176, (open quotes) Annual Report of Natural and Supplemental Gas Supply and Disposition (close quotes). Other sources include industry literature and corporate annual reports to shareholders. The companies appearing in this report are major interstate natural gas pipeline companies, large distribution companies, or combination companies with both pipeline and distribution operations. The report contains profiles of 45 corporate families. The profiles describe briefly each company, where it operates, and any important issues that the company faces. The purpose of this report is to show the movement of natural gas through the various States served by the 45 large companies profiled.

  7. Designing for cost In an aerospace company

    E-Print Network [OSTI]

    Hammar, Elizabeth (Elizabeth Deming)

    2014-01-01T23:59:59.000Z

    Companies take different approaches, and achieve different degrees of implementation, in designing products for cost. This thesis discusses Target Costing and its application at The Boeing Company. Target Costing is a ...

  8. Southern Company: DOE Smart Grid RFI Addressing Policy and Logistical...

    Broader source: Energy.gov (indexed) [DOE]

    Southern Company: DOE Smart Grid RFI Addressing Policy and Logistical Challenges Southern Company: DOE Smart Grid RFI Addressing Policy and Logistical Challenges Southern Company:...

  9. LETTER TO SUCCESSFUL COMPANY OR ESCO | Department of Energy

    Office of Environmental Management (EM)

    SUCCESSFUL COMPANY OR ESCO LETTER TO SUCCESSFUL COMPANY OR ESCO Document features a letter template and sample to help Federal agencies inform an energy services company (ESCO)...

  10. LETTER TO UNSUCCESSFUL COMPANY OR ESCO | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    UNSUCCESSFUL COMPANY OR ESCO LETTER TO UNSUCCESSFUL COMPANY OR ESCO Document features a letter template and sample to help Federal agencies inform energy service companies (ESCOs)...

  11. Nevada Geothermal Power Company, Inc. (Blue Mountain) | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nevada Geothermal Power Company, Inc. (Blue Mountain) Nevada Geothermal Power Company, Inc. (Blue Mountain) Nevada Geothermal Power Company, Inc. (Blue Mountain) Nevada Geothermal...

  12. Switch to duplex stainless steels

    SciTech Connect (OSTI)

    Quik, J.M.A.; Geudeke, M.

    1994-11-01T23:59:59.000Z

    Duplex stainless steels contain approximately equal proportions of ferrite and austenite. These stainless steels have become an established material of construction in the chemical process industries (CPI). Duplexes offer benefits over austenitic stainless steels and carbon steels because of their higher strength, and good toughness and ductility, in combination with equivalent resistance to general corrosion, as well as better resistance to localized corrosion and stress corrosion cracking. Additionally, duplex materials have thermal-conductivity and thermal-expansion coefficients similar to those of ferritic materials, are tough at low (sub-zero) temperatures, and have a high resistance to erosion and abrasion. In some of the highly corrosive environments encountered in the CPI, the super duplex stainless steels offer cost-effective options not possible with the standard austenitic stainless steels. The initial applications were almost exclusively as heat exchanger tubing in water-cooled service. In recent times, duplex stainless steels have been used in the oil, gas, and chemical industries. Examples include service in sweet and mildly sour corrosive environments, on offshore platforms where weight savings can be realized, and as a replacement for standard austenitic stainless steel in chemical-processing plants.

  13. Duplex Stainless Steels Margaret Gorog

    E-Print Network [OSTI]

    Das, Suman

    , substituted for 6% mo SS in bleach plant Hyper DSS, Offshore oil applications Super, Hyper ­ Corrosion11/14/2014 1 Duplex Stainless Steels Margaret Gorog Federal Way, WA Pulp and Paper Corrosion for suction rolls Duplex Stainless Steel · Improved corrosion and more importantly, stress corrosion cracking

  14. Energy Audit Helps Small Company Stay Competitive

    Broader source: Energy.gov [DOE]

    The recommended improvements are saving the West Linn Paper Company in Oregon an annual cost of about $380,000.

  15. UNDERSTANDING OUR COMPANY AN IBM PROSPECTUS

    E-Print Network [OSTI]

    a company or planned venture so that individuals can make informed decisions. Fully understanding the future lay in consolidation, and chose to bulk up. And then some companies just concluded that their core confidence in IBM's future. We have done much in recent years to transform our company. In a number

  16. ENERGY SERVICES COMPANIES SUMMARY OF RESPONSES

    E-Print Network [OSTI]

    a survey of the Energy Services Companies doing business in California. An Energy Services Company (ESCO. In addition, an ESCO frequently guarantees that the project's energy cost savings will be adequate to payCALIFORNIA ENERGY COMMISSION SUMMARY OF ENERGY SERVICES COMPANIES SUMMARY OF RESPONSES STAFFREPORT

  17. ESPC ENABLE Energy Service Companies

    Broader source: Energy.gov [DOE]

    Energy Savings Performance Contract (ESPC) ENABLE projects use General Services Administration (GSA) Federal Supply Schedule 84, SIN 246-53 to select a qualified energy service company (ESCO). The ESCO is required to go through a two-step qualification process to become an eligible ESPC ENABLE or Schedule 84 service provider. The two-step process includes first, becoming Department of Energy (DOE)- qualified and second, being awarded a contract under the GSA Schedule.

  18. Illinois Company Implementing Solar Energy

    Office of Energy Efficiency and Renewable Energy (EERE)

    J.F. Family Limited Partnership has been awarded $191,000 through the Recovery Act toward the use of solar energy at its Lakefront Parkway property in Edwardsville, Ill., which is the company headquarters for J.F. Electric Inc. The funding will be used to install a 75-kW solar photovoltaic system on the building’s roof, creating electricity on-site and creating or saving a total of 14 jobs.

  19. Long-term stability of spotted regions and the activity-induced Rossiter-McLaughlin effect on V889 Herculis. A synergy of photometry, radial velocity measurements, and Doppler imaging

    E-Print Network [OSTI]

    Huber, K F; Czesla, S; Schmitt, J H M M; Esposito, M; Ilyin, I; González-Pérez, J N

    2009-01-01T23:59:59.000Z

    The young active G-dwarf star V889 Herculis (HD 171488) shows pronounced spots in Doppler images as well as large variations in photometry and radial velocity (RV) measurements. However, the lifetime and evolution of its active regions are not well known. We study the existence and stability of active regions on the star's surface using complementary data and methods. Furthermore, we analyze the correlation of spot-induced RV variations and Doppler images. Photometry and high-resolution spectroscopy are used to examine stellar activity. A CLEAN-like Doppler Imaging (DI) algorithm is used to derive surface reconstructions. We study high-precision RV curves to determine their modulation due to stellar activity in analogy to the Rossiter-McLaughlin effect. To this end we develop a measure for the shift of a line's center and compare it to RV measurements. We show that large spotted regions exist on V889 Her for more than one year remaining similar in their large scale structure and position. This applies to seve...

  20. Development of Stronger and More Reliable Cast Austenitic Stainless Steels (H-Series) Based on Scientific and Design Methodology

    SciTech Connect (OSTI)

    Pankiw, Roman I; Muralidharan, G. (Murali); Sikka, Vinod K.

    2006-06-30T23:59:59.000Z

    The goal of this project was to increase the high-temperature strength of the H-Series of cast austenitic stainless steels by 50% and the upper use temperature by 86 to 140 degrees fahrenheit (30 to 60 degrees celsius). Meeting this goal is expected to result in energy savings of 35 trillion Btu/year by 2020 and energy cost savings of approximately $230 million/year. The higher-strength H-Series cast stainless steels (HK and HP type) have applications for the production of ethylene in the chemical industry, for radiant burner tubes and transfer rolls for secondary processing of steel in the steel industry, and for many applications in the heat treating industry, including radiant burner tubes. The project was led by Duraloy Technologies, Inc., with research participation by Oak Ridge National Laboratory (ORNL) and industrial participation by a diverse group of companies.

  1. 2169 steel waveform experiments.

    SciTech Connect (OSTI)

    Furnish, Michael David; Alexander, C. Scott; Reinhart, William Dodd; Brown, Justin L.

    2012-11-01T23:59:59.000Z

    In support of LLNL efforts to develop multiscale models of a variety of materials, we have performed a set of eight gas gun impact experiments on 2169 steel (21% Cr, 6% Ni, 9% Mn, balance predominantly Fe). These experiments provided carefully controlled shock, reshock and release velocimetry data, with initial shock stresses ranging from 10 to 50 GPa (particle velocities from 0.25 to 1.05 km/s). Both windowed and free-surface measurements were included in this experiment set to increase the utility of the data set, as were samples ranging in thickness from 1 to 5 mm. Target physical phenomena included the elastic/plastic transition (Hugoniot elastic limit), the Hugoniot, any phase transition phenomena, and the release path (windowed and free-surface). The Hugoniot was found to be nearly linear, with no indications of the Fe - phase transition. Releases were non-hysteretic, and relatively consistent between 3- and 5-mm-thick samples (the 3 mm samples giving slightly lower wavespeeds on release). Reshock tests with explosively welded impactors produced clean results; those with glue bonds showed transient releases prior to the arrival of the reshock, reducing their usefulness for deriving strength information. The free-surface samples, which were steps on a single piece of steel, showed lower wavespeeds for thin (1 mm) samples than for thicker (2 or 4 mm) samples. A configuration used for the last three shots allows release information to be determined from these free surface samples. The sample strength appears to increase with stress from ~1 GPa to ~ 3 GPa over this range, consistent with other recent work but about 40% above the Steinberg model.

  2. ITP Steel: Energy Use in the U.S. Steel Industry: An Historical...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Use in the U.S. Steel Industry: An Historical Perspective and Future Opportunities, September 2000 ITP Steel: Energy Use in the U.S. Steel Industry: An Historical...

  3. Climate VISION: Private Sector Initiatives: Iron and Steel: Resources...

    Office of Scientific and Technical Information (OSTI)

    Industry Associations American Iron and Steel Institute For over a century, North American steel producers have worked as partners and members of the American Iron and Steel...

  4. THE DEVELOPMENT OF MICROSTRUCTURE IN DUPLEX STAINLESS STEEL WELDS

    E-Print Network [OSTI]

    Cambridge, University of

    THE DEVELOPMENT OF MICROSTRUCTURE IN DUPLEX STAINLESS STEEL WELDS by Naseem Issa Abdallah Haddad;The Development of Microstructure in Duplex Stainless Steel Welds Abstract Duplex stainless steels

  5. Auto/Steel Partnership: AHSS Stamping, Strain Rate Characterization...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AHSS Stamping, Strain Rate Characterization, Sheet Steel Fatigue, AHSS Joining AutoSteel Partnership: AHSS Stamping, Strain Rate Characterization, Sheet Steel Fatigue, AHSS...

  6. Nonlinear seismic response analysis of steel-concrete composite frames

    E-Print Network [OSTI]

    Barbato, Michele

    2008-01-01T23:59:59.000Z

    formulation of nonlinear steel- concrete composite beam ele-Behaviour of Composite Steel and Concrete Struc- turalE. (2001). “Analysis of steel-concrete composite frames with

  7. Deere & Company Energy Management Program

    E-Print Network [OSTI]

    Darby, D. F.

    1981-01-01T23:59:59.000Z

    for evaluating each unit's ene~gy savings techniques. Two more key elements merit attention. These are "energy ethic" and "feedback". The people that comprise a company can enhance a conservation program if they are convinced it is for their good as well... vital but "good business" as well. Meet Lester! One of our factories has had an an:i mated movie produced which ~eatures a polar bear: hero. He represents the central theme of an ene~gy conservation awareness program. The program con~ tinues...

  8. Broin Companies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof Energy Future of CSP: ChallengesEnergyEnergyBroin Companies

  9. Wyrulec Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells, Wisconsin: EnergyWyandanch, New York:State ParksWyrulec Company Jump to:

  10. Benjamin Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2,AUDIT REPORT Americium/CuriumAguaBBBWind LtdFengliBenjamin Company Jump

  11. Iron and Steel Energy Intensities

    U.S. Energy Information Administration (EIA) Indexed Site

    If you are having trouble, call 202-586-8800 for help. Home > >Energy Users > Energy Efficiency Page > Iron and Steel Energy Intensities First Use of Energy Blue Bullet First Use...

  12. Great Lakes Steel -- PCI facility

    SciTech Connect (OSTI)

    Eichinger, F.T. [BMH Claudius Peters AG, Buxtehude (Germany); Dake, S.H.; Wagner, E.D.; Brown, G.S. [Raytheon Engineers and Constructors, Pittsburgh, PA (United States)

    1997-12-31T23:59:59.000Z

    This paper discusses the planning, design, and start-up of the 90 tph PCI facility for National Steel`s Great Lakes Steel Division in River Rouge, MI. This project is owned and operated by Edison Energy Services, and was implemented on a fast-track basis by Raytheon Engineers and Constructors, Babcock Material Handling, and Babcock and Wilcox. This paper presents important process issues, basic design criteria, an the challenges of engineering and building a state-of-the-art PCI facility in two existing plants. Pulverized coal is prepared at the River Rouge Power Plant of Detroit Edison, is pneumatically conveyed 6,000 feet to a storage silo at Great Lakes Steel, and is injected into three blast furnaces.

  13. Overlay welding irradiated stainless steel

    SciTech Connect (OSTI)

    Kanne, W.R.; Chandler, G.T.; Nelson, D.Z.; Franco-Ferreira, E.A.

    1993-08-01T23:59:59.000Z

    An overlay technique developed for welding irradiated stainless steel may be important for repair or modification of fusion reactor materials. Helium, present due to n,{alpha} reactions, is known to cause cracking using conventional welding methods. Stainless steel impregnated with 3 to 220 appm helium by decay of tritium was used to develop a welding process that could be used for repair. The result was a gas metal arc weld overlay technique with low-heat input and low-penetration into the helium-containing material. Extensive metallurgical and mechanical testing of this technique demonstrated substantial reduction of helium embrittlement damage. The overlay technique was applied to irradiated 304 stainless steel containing 10 appm helium. Surface cracking, present in conventional welds made on the same steel at lower helium concentrations, was eliminated. Underbead cracking, although greater than for tritium charged and aged material, was minimal compared to conventional welding methods.

  14. Welding tritium aged stainless steel

    SciTech Connect (OSTI)

    Kanne, W.R. Jr.

    1993-04-01T23:59:59.000Z

    Stainless steels exposed to tritium become unweldable by conventional methods due to He buildup within the metal matrix. With longer service lives expected for new weapon systems, and service life extensions of older systems, methods for welding/repair on tritium-exposed material will become important. Results are reported that indicate that both solid-state resistance welding and low-heat gas metal arc overlay welding are promising methods for repair or modification of tritium-aged stainless steel.

  15. High productivity injection practices at Rouge Steel

    SciTech Connect (OSTI)

    Barker, D.H.; Hegler, G.L.; Falls, C.E. [Rouge Steel Co., Dearborn, MI (United States)

    1995-12-01T23:59:59.000Z

    Rouge Steel Company, located in Dearborn, Michigan, operates two blast furnaces. The smaller of the pair, ``B`` Furnace, has a hearth diameter of 20 feet and 12 tuyeres. It has averaged 2,290 NTHM (net ton of hot metal) per day of 8.2 NTHM per 100 cubic feet of working volume. ``C`` Furnace has a hearth diameter of 29 feet and 20 tuyeres. Both of these furnaces are single tap hole furnaces. Prior to its reline in 1991, ``C`` Furnace was producing at a rate of 3,300 NTHM/day or about 6.25 NTHM/100 cfwv. In November, 1994 it averaged 5,106 NTHM/day or 9.6 NTHM/100 cfwv. This paper discusses how the current production rates were achieved. Also, the areas that needed to be addressed as production increased will be described. These areas include casthouse arrangement and workload, hot metal ladle capacity, slag pot capacity and charging capability. Coupled with the high blast temperature capability, the furnace was provided with a new natural gas injection system that injected the gas through the blowpipes and a natural gas injection system to enrich the stove gas. Following the furnace reline, natural gas has been used in three ways: tuyere level control; combination injection; and stove gas enrichment. Coke consumption rate has also decreased per NTHM.

  16. New Mexico Gas Company- Commercial Efficiency Programs

    Broader source: Energy.gov [DOE]

    The New Mexico Gas Company Commercial Energy Efficiency programs provide energy savings for businesses using natural gas for cooking and water heating. Prescriptive incentives for specified...

  17. Panasonic Corporation Energy Company formerly Matsushita Battery...

    Open Energy Info (EERE)

    to: navigation, search Name: Panasonic Corporation Energy Company (formerly Matsushita Battery Industrial Co) Place: Moriguchi, Osaka, Japan Zip: 570-8511 Product: Producer of...

  18. Colonial Pipeline Company Timothy C. Felt

    Broader source: Energy.gov (indexed) [DOE]

    that are critically important to our nation's economy. History In 1961, a handful of energy companies came together to build what was then the single largest privately funded...

  19. POWER PURCHASE AGREEMENT DELMARVA POWER & LIGHT COMPANY

    E-Print Network [OSTI]

    Firestone, Jeremy

    POWER PURCHASE AGREEMENT between DELMARVA POWER & LIGHT COMPANY ("Buyer") and BLUEWATER WIND 3.5 Energy Forecasts, Scheduling and Balancing.......................................... 39 3

  20. MENTOR MEET New Student/Company Information

    E-Print Network [OSTI]

    MENTOR MEET New Student/Company Information Venture Connection Mentor Meet Info ________ Mentoring ________ Funding ________ NEXT STEPS - Office use Mentor: Actions Who By Date Other

  1. Enforcement Letter, Westinghouse Savannah River Company - November...

    Broader source: Energy.gov (indexed) [DOE]

    Savannah River Site On November 14, 2003, the U.S. Department of Energy (DOE) issued a nuclear safety Enforcement Letter to Westinghouse Savannah River Company related to...

  2. Saturation in ``nonmagnetic'' stainless steel C. Weber and J. Fajansa)

    E-Print Network [OSTI]

    Fajans, Joel

    Saturation in ``nonmagnetic'' stainless steel C. Weber and J. Fajansa) Department of Physics July 1998 Scientific equipment often uses ``nonmagnetic'' stainless steel, relying on the steel's nonmagnetic behavior to leave external magnetic fields unaltered. However, stainless steel's permeability can

  3. STEEL STRUCTURES FOR BUILDING IN CHINA PROF. HE MINGXUAN

    E-Print Network [OSTI]

    Cambridge, University of

    STEEL STRUCTURES FOR BUILDING IN CHINA PROF. HE MINGXUAN VICE-PRESIDENT OF CHINA STEEL CONSTRUCTION SOCIETY CHIEF ENGINEER OF BAOSTEEL CONSTRUCTION CO., LTD JULY 6, 2012 LONDON #12;1. STEEL AND STEEL STRUCTURES IN CHINA 2. SOME PROJECTS OF STEEL STRUCTURES FOR HIGH- RISE BUILDINGS IN CHINA #12;STEEL

  4. STUDENT STEEL BRIDGE COMPETITION The mission of the Student Steel Bridge Competition (SSBC) is to supplement

    E-Print Network [OSTI]

    Duchowski, Andrew T.

    1 STUDENT STEEL BRIDGE COMPETITION 2012 RULES #12;2 MISSION The mission of the Student Steel Bridge in a steel structure that meets client specifications and optimizes performance and economy. The SSBC are stimulated to innovate, practice professionalism, and use structural steel efficiently. WELCOME ASCE and AISC

  5. B Allison Adams, BSBA `91 Caspers Company

    E-Print Network [OSTI]

    Wu, Dapeng Oliver

    Jeremy Foley UF Athletic Association B Kristen Foley Nielsen B Dr. James R. Follain Nelson A. Rockefeller Acquisition Center B Darin Cook, BS `87 Infinite Energy B Kyle Cooper, BSBA `05 Orlando Predators B James Columbia Timber Company B Katie Davis James Moore & Company B Stuart Davis, BSAc '80, MAcc `81 Titan

  6. Company number 5857955 Wellcome Trust Finance plc

    E-Print Network [OSTI]

    Rambaut, Andrew

    Company number 5857955 Wellcome Trust Finance plc Annual Report and Financial Statements Year ended 30 September 2012 #12;Company number 5857955 Wellcome Trust Finance plc Contents Page Directors Trust Finance plc Directors' Report for the year ended 30 September 2012 Report of the Directors

  7. Company number 5857955 Wellcome Trust Finance plc

    E-Print Network [OSTI]

    Rambaut, Andrew

    Company number 5857955 Wellcome Trust Finance plc Annual Report and Financial Statements Year ended 30 September 2013 #12;Company number 5857955 Wellcome Trust Finance plc Contents Page Directors Trust Finance plc Directors' Report For the year ended 30 September 2013 Report of the Directors

  8. Researching Careers, Industries, and Companies Tracie Thomas

    E-Print Network [OSTI]

    Shull, Kenneth R.

    /Industry ­ Increased certainty when selecting an internship ­ Demonstrates a sincere interest in working this internship?" "I have always been interested in working in Finance, and Ford Motor Company is a well-know company" OR " I am very interested in working for a top-3 automaker in the US especially since Ford

  9. Survey of Companies in Machine Health Monitoring and Maintenance Company Capability Software Application Modeling Technique

    E-Print Network [OSTI]

    Huang, Samuel H.

    software · Paper · Food · Steel · Petrochemical industries NO MODELING AssetPoint www.tabware.com · Data acquisition and open systems storage · Enterprise Asset Management Tabware (CMMS application) · Petrochemical

  10. STEEL: RECENT PUBLICATIONS HAMPSON, G. J., STEEL, R. J., BURGESS,

    E-Print Network [OSTI]

    Yang, Zong-Liang

    , eds., Atlas of Deepwater Outcrops, American Assoc. Petrol. Geol. Studies in Geology 56 YOSHIDA, S of Deepwater Outcrops, American Assoc. Petrol. Geol. Studies in Geology 56 MCLAURIN, B. & STEEL, R. J. (2006 on an Eocene shelf margin, Central Basin, Spitsbergen. Bull. Am. Assoc. Petrol. Geol. 90, 1451-72. #12;

  11. Tennessee Small Business Investment Company Credit Act (Tennessee)

    Broader source: Energy.gov [DOE]

    The Tennessee Small Business Company Credit Act offers $120 million in gross premiums tax credits to insurance companies that invest in companies certified by the State of Tennessee as TNInvestcos....

  12. Sun Life Assurance Company of Canada is a member of the Sun Life Financial group of companies. 2005 Sun Life Assurance Company of Canada. All rights reserved.

    E-Print Network [OSTI]

    Mullins, Dyche

    JL 5/26/09 Sun Life Assurance Company of Canada is a member of the Sun Life Financial group of companies. © 2005 Sun Life Assurance Company of Canada. All rights reserved. Sun Life Financial and the globe symbol are registered trademarks of Sun Life Assurance Company of Canada. SLPC 5302 07/02 H I G H

  13. Superplastic deformation in two microduplex stainless steels

    SciTech Connect (OSTI)

    Lesuer, D.R.; Nieh, T.G.; Syn, C.K. [Lawrence Livermore National Lab., CA (United States); Taleff, E.M. [Texas Univ., Austin, TX (United States)

    1996-09-01T23:59:59.000Z

    The deformation behavior and mechanisms of superplastic flow in two microduplex stainless steels (SuperDux64 and Nitronic 19D) were studied at {similar_to}0.7T{sub m}. The two steels differed in initial grain size by a factor of 3. Both steels exhibited solute-drag-controlled grain boundary sliding in a high temperature {gamma}+{delta} phase field. In a lower temperature {gamma}+{sigma} phase field, the fine-grained steel ({bar L}=5{mu}m) exhibited climb-controlled grain boundary sliding and the coarser- grained steel ({bar L}=15{mu}m) exhibited solute-drag-controlled slip creep.

  14. Simonis Sa7; and Steel. Company Occu?atisnal Exposure to Radioactive Eust

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling7 AugustAFRICAN3u ;;;::Sampling atpff!' ;-g / (.

  15. 60 Years of duplex stainless steel applications

    SciTech Connect (OSTI)

    Olsson, J.; Liljas, M. [Avesta Sheffield AB, Avesta (Sweden)

    1994-12-31T23:59:59.000Z

    In this paper the history of wrought duplex stainless steel development and applications is described. Ferritic-austenitic stainless steels were introduced only a few decades after stainless steels were developed. The paper gives details from the first duplex stainless steels in the 1930`s to the super duplex stainless steel development during the 1980`s. During the years much effort has been devoted to production and welding metallurgy as well as corrosion research of the duplex stainless steels. Therefore, duplex stainless steels are to-day established in a wide product range. Numerous important applications are exemplified. In most cases the selection of a duplex steel has been a result of the combination high strength excellent corrosion resistance. In the pulp and paper industry the most interesting use is as vessel material in digesters. For chemical process industry, the duplex steels are currently used in heat exchangers. The largest application of duplex steels exists in the oil and gas/offshore industry. Hundreds of kms of pipelines are installed and are still being installed. An increased use of duplex steels is foreseen in areas where the strength is of prime importance.

  16. Private Company Uses EERE-Supported Chemistry Model to Substantially...

    Office of Environmental Management (EM)

    Private Company Uses EERE-Supported Chemistry Model to Substantially Improve Combustion Engine Simulation Software Private Company Uses EERE-Supported Chemistry Model to...

  17. Vermont Wind Measurement Company Still Strong | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Vermont Wind Measurement Company Still Strong Vermont Wind Measurement Company Still Strong April 9, 2010 - 3:16pm Addthis NRG's new building utilizes solar power, but their...

  18. Regulation of Gas, Electric, and Water Companies (Maryland)

    Broader source: Energy.gov [DOE]

    The Public Service Commission is responsible for regulating gas, electric, and water companies in the state. This legislation contains provisions for such companies, addressing planning and siting...

  19. National Interest Security Company NISC Formerly Technology Management...

    Open Energy Info (EERE)

    National Interest Security Company NISC Formerly Technology Management Services TMS Inc Jump to: navigation, search Name: National Interest Security Company (NISC) (Formerly...

  20. Sandia National Laboratories: UOP-a Honeywell Company

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    UOP-a Honeywell Company ECIS and UOP (a Honewell Company): CSTs Clean Radioactive Waste in Fukushima and Worldwide On February 14, 2013, in Energy, Materials Science, Nuclear...

  1. Dow Chemical Company: Assessment Leads to Steam System Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dow Chemical Company: Assessment Leads to Steam System Energy Savings in a Petrochemical Plant Dow Chemical Company: Assessment Leads to Steam System Energy Savings in a...

  2. Sandia National Laboratories: Ocean Renewable Power Company TidGen®...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Company TidGen turbine High-Fidelity Hydrostructural Analysis of Ocean Renewable Power Company's (ORPC's) TidGen Turbine On March 19, 2014, in Computational Modeling &...

  3. New Mexico Gas Company- Residential Efficiency Programs

    Broader source: Energy.gov [DOE]

    The New Mexico Gas Company provides incentives for energy saving measures and improvements to residential homes. Rebates are available for adding insulation and for homes which attain Energy Star...

  4. Deere and Company Energy Management Program

    E-Print Network [OSTI]

    Boyd, P. M.

    1980-01-01T23:59:59.000Z

    An overview of the Deere & Company energy management program is discussed. A review is made of seven key elements which have contributed to the success of the program. Installed projects and established programs are identified and discussed...

  5. Fall 2012 FUPWG Meeting Welcome: Southern Company

    Broader source: Energy.gov [DOE]

    Presentation—given at the Fall 2012 Federal Utility Partnership Working Group (FUPWG) meeting—covers the Southern Company's retail service territory, financials, customers and sales, power generation, U.S. military projects, and more.

  6. CompanieswithPNNLRoots All of these companies

    E-Print Network [OSTI]

    Devary Communications ­ 1995 Directed Technologies Drilling, Inc. ­ 1992 Ebasco, (Foster Wheeler Toro Prepaid, Inc., now Coinstar) ­ 1997 New Horizon Technologies, Inc. ­ 1995 Nortec (formerlyCompanieswithPNNLRoots All of these companies have received foundational technology and

  7. Deere and Company Energy Management Program 

    E-Print Network [OSTI]

    Boyd, P. M.

    1980-01-01T23:59:59.000Z

    An overview of the Deere & Company energy management program is discussed. A review is made of seven key elements which have contributed to the success of the program. Installed projects and established programs are identified and discussed...

  8. A virtual company concept for reservoir management

    SciTech Connect (OSTI)

    Martin, F.D. [Dave Martin and Associates, Inc. (United States); Kendall, R.P.; Whitney, E.M. [Los Alamos National Lab., NM (United States)

    1998-12-31T23:59:59.000Z

    This paper describes how reservoir management problems were pursued with a virtual company concept via the Internet and World Wide Web. The focus of the paper is on the implementation of virtual asset management teams that were assembled with small independent oil companies. The paper highlights the mechanics of how the virtual team transferred data and interpretations, evaluated geological models of complex reservoirs, and used results of simulation studies to analyze various reservoir management strategies.

  9. An analysis of the bank holding company

    E-Print Network [OSTI]

    Facka, David William

    1969-01-01T23:59:59.000Z

    company exercises more supervision over the investments of each affiliate bank than over any of the other affiliate bank's activities. This service improves the flow of information, thus increasing the productivity of investments . Many of the services...) the conven- ience, needs, and welfare of the communities and the area concerned; and (5) whether or not the effect of such acquisition or merger or consolidation would be to expand the size or extent of the bank holding company system involved beyond...

  10. Development of Stronger and More Reliable Cast Austenitic Stainless Steels (H-Series) Based on Scientific Design Methodology

    SciTech Connect (OSTI)

    Muralidharan, G.; Sikka, V.K.; Pankiw, R.I.

    2006-04-15T23:59:59.000Z

    The goal of this program was to increase the high-temperature strength of the H-Series of cast austenitic stainless steels by 50% and upper use temperature by 86 to 140 F (30 to 60 C). Meeting this goal is expected to result in energy savings of 38 trillion Btu/year by 2020 and energy cost savings of $185 million/year. The higher strength H-Series of cast stainless steels (HK and HP type) have applications for the production of ethylene in the chemical industry, for radiant burner tubes and transfer rolls for secondary processing of steel in the steel industry, and for many applications in the heat-treating industry. The project was led by Duraloy Technologies, Inc. with research participation by the Oak Ridge National Laboratory (ORNL) and industrial participation by a diverse group of companies. Energy Industries of Ohio (EIO) was also a partner in this project. Each team partner had well-defined roles. Duraloy Technologies led the team by identifying the base alloys that were to be improved from this research. Duraloy Technologies also provided an extensive creep data base on current alloys, provided creep-tested specimens of certain commercial alloys, and carried out centrifugal casting and component fabrication of newly designed alloys. Nucor Steel was the first partner company that installed the radiant burner tube assembly in their heat-treating furnace. Other steel companies participated in project review meetings and are currently working with Duraloy Technologies to obtain components of the new alloys. EIO is promoting the enhanced performance of the newly designed alloys to Ohio-based companies. The Timken Company is one of the Ohio companies being promoted by EIO. The project management and coordination plan is shown in Fig. 1.1. A related project at University of Texas-Arlington (UT-A) is described in Development of Semi-Stochastic Algorithm for Optimizing Alloy Composition of High-Temperature Austenitic Stainless Steels (H-Series) for Desired Mechanical and Corrosion Properties (ORNL/TM-2005/81/R1). The final report on another related project at the University of Tennessee by George Pharr, Easo George, and Michael Santella has been published as Development of Combinatorial Methods for Alloy Design and Optimization (ORNL/TM-2005-133). The goal of the project was to increase the high-temperature strength by 50% and upper use temperature by 86 to 140 F (30 to 60 C) of H-Series of cast austenitic stainless steels. Meeting such a goal is expected to result in energy savings of 38 trillion Btu/year by 2020 and energy cost savings of $185 million/year. The goal of the project was achieved by using the alloy design methods developed at ORNL, based on precise microcharacterization and identification of critical microstructure/properties relationships and combining them with the modern computational science-based tools that calculate phases, phase fractions, and phase compositions based on alloy compositions. The combined approach of microcharacterization of phases and computational phase prediction would permit rapid improvement of the current alloy composition of an alloy and provide the long-term benefit of customizing alloys within grades for specific applications. The project was appropriate for the domestic industry because the current H-Series alloys have reached their limits both in high-temperature-strength properties and in upper use temperature. The desire of Duraloy's industrial customers to improve process efficiency, while reducing cost, requires that the current alloys be taken to the next level of strength and that the upper use temperature limit be increased. This project addressed a specific topic from the subject call: to develop materials for manufacturing processes that will increase high-temperature strength, fatigue resistance, corrosion, and wear resistance. The outcome of the project would benefit manufacturing processes in the chemical, steel, and heat-treating industries.

  11. Steel project fact sheet: Steel reheating for further processing

    SciTech Connect (OSTI)

    NONE

    1998-04-01T23:59:59.000Z

    Steel reheating is an energy-intensive process requiring uniform temperature distribution within reheating furnaces. Historically, recuperators have ben used to preheat combustion air, thereby conserving energy. More recent innovations include oxygen enrichment and the use of regenerative burners, which provide higher preheat air temperatures than recuperators. These processes have limitations such as equipment deterioration, decreasing energy efficiency over time, high maintenance costs, and increased NO{sub x} emissions with increased air preheat temperature, unless special equipment is used. Praxair, Inc., supplier of oxygen and other industrial gases to the steel industry, proposes to introduce an innovative oxy-fuel burner technology (using 100% oxygen) to the steel reheating industry. Oxy-fuel combustion reduces or eliminates nitrogen in combustion air and substantially reduces waste heat carried out with flue gas. Based on technology currently used in the glass, hazardous waste, and aluminum industries, Praxair has developed and patented low temperature, oxy-fuel burners that can be used in high temperature industrial furnaces where temperature uniformity is critical and extremely low NO{sub x} emissions are desired. The technical goal of the project is to demonstrate the use of oxy-fuel burners in a slab reheat furnace while reducing energy consumption by 45% and NO{sub x} emissions by 90% within the converted furnace zones. Successful implementation of this technology also will eliminate the need to periodically replace recuperators and install NO{sub x} removal equipment.

  12. Use of a new microporous insulation in a sub car at Acme Steel

    SciTech Connect (OSTI)

    Harvey, H.; Gamble, F.C.; MacKenzie, I.B.

    1996-12-31T23:59:59.000Z

    Acme Steel Co. is a small integrated steel company headquartered in Riverdale IL., with its blast furnace and coke plant operations located in the city of Chicago. Rail transportation between the two plants is by Conrail with two crews assigned exclusively to Acme. The torpedo cars used for this service are specially reinforced, with 36 in. wheels and additional braking capability for safety on public rail tracks. Over a seven month period, microporous insulating panels 0.28 in. thick in No. 49 sub ladle saved an average 24 degrees in the iron on arrival at the BOF compared to the average for the rest of the fleet. The microporous insulation replaced 0.25 in. of compressed fiber panel.

  13. Parallel Processing Letters fc World Scientific Publishing Company

    E-Print Network [OSTI]

    Calheiros, Rodrigo N.

    World Scientific Publishing Company http://ejournals.wspc.com.sg/ppl/ppl.shtml SCHEDULING AND MANAGEMENT

  14. Duplex stainless steel: From specialty to commodity

    SciTech Connect (OSTI)

    Quick, J.M.A.; Geudeke, M. [Shell Internationale Petroleum Mij. B.V., The Hague (Netherlands)

    1994-12-31T23:59:59.000Z

    Important applications of duplex stainless steel in the oil and chemical industry date from the seventies. Duplex stainless steel is attractive because it combines high mechanical strength, about the same as for carbon steel, and good corrosion resistance particularly against chloride stress corrosion cracking up to about 100 C. This paper highlights a number of examples that are typical for the potential as well as the problems associated with this type of material.

  15. Repassivation of 13% Cr steel dependent on brine pH

    SciTech Connect (OSTI)

    Skogsberg, J.W.; Walker, M.L.

    2000-02-01T23:59:59.000Z

    A joint laboratory project, involving an oil production and oil well service company, investigated repassivation of martensitic 13% Cr steel. The rate at which this alloy is repassivated after losing its protective passive oxide layer to hydrochloric acid (HCI) depended on the pH of the spent acid returns. Test samples of 13% Cr cut from oilfield tubing were subjected to a fluid sequence of (1) initial brine, (2) HCI, (3) spent acid, and (4) final brine. In 9 days, the samples regained their passive oxide layers. When spent acid was taken out of the fluid sequence, the samples regained passive oxide layers in 3 days.

  16. Improving the toughness of ultrahigh strength steel

    E-Print Network [OSTI]

    Soto, Koji

    2002-01-01T23:59:59.000Z

    of the low-alloy steels used in aerospace applications. Thisalloys of each category and their compositions are shown in Table 1.1 with their Aerospace

  17. HYDROGEN EMBRITTLEMENT IN LOW CARBON STEEL

    E-Print Network [OSTI]

    Rafiq A. Siddiqui; Sabah A. Abdul-wahab; Tasneem Pervez; Sayyad Z. Qamar

    Many metals and alloys absorb hydrogen and diffusion of hydrogen under certain conditions can seriously weaken and produces embrittlement in steel. Hydrogen embrittlement is a type of metal deterioration that is related to stress corrosion cracking. Although steels are well known for their susceptibility to hydrogen embrittlement, the mechanism of transportation of hydrogen is not very clear in low carbon steels. Standard tensile steel specimens were hydrogenated from 1 to 5 hours and deformed by cold worked to 50%,60%,70 % 80 % and were investigated for mechanical properties.

  18. MICROSTRUCTURE AND PROPERTIES OF DUAL PHASE STEELS CONTAINING FINE PRECIPITATES

    E-Print Network [OSTI]

    Gau, J.S.

    2014-01-01T23:59:59.000Z

    and Properties of Dual-Phase Steels, R. A. Kot and J. W.of Niobium Microalloyed Dual- Phase Steel, MetallurgicalAND PROPERTIES OF DUAL PHASE STEELS CONTAINING FINE

  19. FERRITE STRUCTURE AND MECHANICAL PROPERTIES OF LOW ALLOY DUPLEX STEELS

    E-Print Network [OSTI]

    Hoel, R.H.

    2013-01-01T23:59:59.000Z

    and Properties of Dual-Phase Steels, R. A. Kot and J. W.Formable HSLA and Dual Phase Steels, A. T. Davenport, ed. ,Formable HSLA and Dual Phase Steels, A. T. Davenport, ed. ,

  20. Mag-Foot: a steel bridge inspection robot

    E-Print Network [OSTI]

    Asada, Harry

    A legged robot that moves across a steel structure is developed for steel bridge inspection. Powerful permanent magnets imbedded in each foot allow the robot to hang from a steel ceiling powerlessly. Although the magnets ...

  1. Blast damage mitigation of steel structures from near- contact charges

    E-Print Network [OSTI]

    Wolfson, Janet Crumrine

    2008-01-01T23:59:59.000Z

    Depth 6.5 in. 6.5 in. 3 in. .625 in. 1.5 in. Material SteelSteelAluminum Steel Polyurethane Weight 472 lb 472 lb 73 lb 45 lb

  2. PROTON INDUCED SWELLING IN TYPE 316 STAINLESS STEEL

    E-Print Network [OSTI]

    Srivastava, A.K.

    2010-01-01T23:59:59.000Z

    an Austenitic Stainless Steel, USAEC Report ORNL-4580, Oakin Austenitic Stainless Steel, Ref. 5, p. 142. D. I. R.Irradiated 304 Stainless Steel, Ref. 5, p. 499. Table 1.

  3. CRAD, Nuclear Facility Construction - Structural Steel, May 29...

    Broader source: Energy.gov (indexed) [DOE]

    Steel, May 29, 2009 CRAD, Nuclear Facility Construction - Structural Steel, May 29, 2009 May 29, 2009 Nuclear Facility Construction - Structural Steel (HSS CRAD 64-16, Rev. 0) This...

  4. Laughlin, Nevada: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOf Kilauea Volcano,Lakefront Tow Tank JumpLatvia: Energy Resources Jump

  5. Overview: STEEL Auto/Steel Partnership | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of Contamination in ManyDepartmentOutreachDepartment ofProgram |Department ofAuto/Steel

  6. ITP Steel: Steel Industry Energy Bandwidth Study October 2004

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet),Energy Petroleum Technology Vision 2020 ITPandSteel Industry

  7. ITP Steel: Steel Industry Marginal Opportunity Study September 2005 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet),Energy Petroleum Technology Vision 2020 ITPandSteel

  8. ITP Steel: Theoretical Minimum Energies to Produce Steel for Selected

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet),Energy Petroleum Technology Vision 2020 ITPandSteelConditions,

  9. annealed stainless steels: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Summary: of stainless steel container materials is a potential problem for long-term radioactive waste storage-to-failure of relevant stainless steels in the annealed...

  10. BACKGROUND GLOBAL STEEL OVERCAPACITY and OIL COUNTRY TUBULAR...

    Broader source: Energy.gov (indexed) [DOE]

    surging-steel-imports Strong trade enforcement is especially critical in the market for oil country tubular goods (OCTG), the pipe and steel products used for energy exploration....

  11. advanced bar steels: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    This thesis is devoted to the numerical investigation of mechanical behavior of Dual phase (DP) steels. Such grade of advanced high strength steels (AHSS) is favorable to the...

  12. Friction Stir Spot Welding of Advanced High Strength Steels II...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Steels II Friction Stir Spot Welding of Advanced High Strength Steels II 2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer...

  13. Development of Steel Fastener Nano-Ceramic Coatings for Corrosion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Steel Fastener Nano-Ceramic Coatings for Corrosion Protection of Magnesium Parts (AMD-704) Development of Steel Fastener Nano-Ceramic Coatings for Corrosion Protection of Magnesium...

  14. Climate VISION: Private Sector Initiatives: Iron and Steel: GHG...

    Office of Scientific and Technical Information (OSTI)

    GHG Inventory Protocols Principles for a Steel Industry Methodology for Reporting Carbon-Related Energy Sources and Raw Materials (PDF 48 KB) Download Acrobat Reader Steel Industry...

  15. Monitoring of Fracture Cri0cal Steel Bridges

    E-Print Network [OSTI]

    Minnesota, University of

    #12;Monitoring of Fracture Cri0cal Steel Bridges: Acous0c Emission Sensors system on other fracture cri0cal steel bridges #12;Project Impact #12;Thank

  16. alloy tool steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of weldments of a high strength low alloy(HSLA) steel in a simulated seawater environment. This steel, designated HSLA80, was developed by the United ... Needham, William...

  17. Property:CompanyType | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroupPerfectenergyInformationProjectAffiliated CompaniesCompanyType Jump

  18. Oman Oil Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRoseConcernsCompany Oil and Gas CompanyOklahoma/WindOkpilakIIOmahaOman

  19. Method for welding chromium molybdenum steels

    DOE Patents [OSTI]

    Sikka, Vinod K. (Clinton, TN)

    1986-01-01T23:59:59.000Z

    Chromium-molybdenum steels exhibit a weakening after welding in an area adjacent to the weld. This invention is an improved method for welding to eliminate the weakness by subjecting normalized steel to a partial temper prior to welding and subsequently fully tempering the welded article for optimum strength and ductility.

  20. A recycling process for dezincing steel scrap

    SciTech Connect (OSTI)

    Dudek, F.J.; Daniels, E.J. (Argonne National Lab., IL (United States)); Morgan, W.A.; Kellner, A.W.; Harrison, J. (Metal Recovery Industries, Inc., Hamilton, ON (Canada))

    1992-01-01T23:59:59.000Z

    In response to the several-fold increase in consumption of galvanized steel in the last decade and the problems associated with refurnacing larger quantities of galvanized steel scrap, a process is being developed to separate and recover the steel and zinc from galvanized ferrous scrap. The zinc is dissolved from the scrap in hot caustic using anodic assistance and is electrowon as dendritic powder. The process is effective for zinc, lead, aluminum, and cadmium removal on loose and baled scrap and on all types of galvanized steel. The process has been pilot tested for batch treatment of 1,000 tons of mostly baled scrap. A pilot plant to continuously treat loose scrap is under construction. Use of degalvanized steel scrap decreases raw materials and environmental compliance costs to steel- and iron-makers, may enable integrated steel producers to recycle furnace dusts to the sinter plant, and may enable EAF production of flat products without use of DRI or pig iron. Recycling the components of galvanized steel scrap saves primary energy, decreases zinc imports, and adds value to the scrap.

  1. A recycling process for dezincing steel scrap

    SciTech Connect (OSTI)

    Dudek, F.J.; Daniels, E.J. [Argonne National Lab., IL (United States); Morgan, W.A.; Kellner, A.W.; Harrison, J. [Metal Recovery Industries, Inc., Hamilton, ON (Canada)

    1992-08-01T23:59:59.000Z

    In response to the several-fold increase in consumption of galvanized steel in the last decade and the problems associated with refurnacing larger quantities of galvanized steel scrap, a process is being developed to separate and recover the steel and zinc from galvanized ferrous scrap. The zinc is dissolved from the scrap in hot caustic using anodic assistance and is electrowon as dendritic powder. The process is effective for zinc, lead, aluminum, and cadmium removal on loose and baled scrap and on all types of galvanized steel. The process has been pilot tested for batch treatment of 1,000 tons of mostly baled scrap. A pilot plant to continuously treat loose scrap is under construction. Use of degalvanized steel scrap decreases raw materials and environmental compliance costs to steel- and iron-makers, may enable integrated steel producers to recycle furnace dusts to the sinter plant, and may enable EAF production of flat products without use of DRI or pig iron. Recycling the components of galvanized steel scrap saves primary energy, decreases zinc imports, and adds value to the scrap.

  2. Interaction between stainless steel and plutonium metal

    SciTech Connect (OSTI)

    Dunwoody, John T [Los Alamos National Laboratory; Mason, Richard E [Los Alamos National Laboratory; Freibert, Franz J [Los Alamos National Laboratory; Willson, Stephen P [Los Alamos National Laboratory; Veirs, Douglas K [Los Alamos National Laboratory; Worl, Laura A [Los Alamos National Laboratory; Archuleta, Alonso [Los Alamos National Laboratory; Conger, Donald J [Los Alamos National Laboratory

    2010-01-01T23:59:59.000Z

    Long-term storage of excess plutonium is of great concern in the U.S. as well as abroad. The current accepted configuration involves intimate contact between the stored material and an iron-bearing container such as stainless steel. While many safety scenario studies have been conducted and used in the acceptance of stainless steel containers, little information is available on the physical interaction at elevated temperatures between certain forms of stored material and the container itself. The bulk of the safety studies has focused on the ability of a package to keep the primary stainless steel containment below the plutonium-iron eutectic temperature of approximately 410 C. However, the interactions of plutonium metal with stainless steel have been of continuing interest. This paper reports on a scoping study investigating the interaction between stainless steel and plutonium metal in a pseudo diffusion couple at temperatures above the eutectic melt-point.

  3. Hydrogen Technology Park DTE Energy -Company Overview

    E-Print Network [OSTI]

    Gas Production Detroit Edison Power Generation Energy Services* Energy Trading Biomass Energy Coal billion · 2.6 million customers · 11,000 MW of generation · 600 BCF natural gas delivery · 11,000 employees #12;3 Diversified Energy and Energy Technology Company * Energy Services: Coal Based Fuels

  4. Search Business News, Stocks, Funds, Companies

    E-Print Network [OSTI]

    Yaghi, Omar M.

    To capture the carbon dioxide generated by coal plants, chemical companies like Dow Chemical Co. and energy in Business » Search All NYTimes.com Energy & Environment WORLD U.S. N.Y. / REGION BUSINESS TECHNOLOGY SCIENCE's Revival May Combat Climate Change Build a Better Carbon Trap and ... And Now, Climate Bill's Supporters

  5. Grid Reliability- An Electric Utility Company's Perspective

    Broader source: Energy.gov [DOE]

    Presentation—given at the Federal Utility Partnership Working Group (FUPWG) Fall 2008 meeting—covers Southern Company's business continuity, North American Electric Reliability Corporation (NERC) cybersecurity, and homeland security as well as physical recovery after a major outage, and five questions to ask your local utility.

  6. AD CONTENT CHECK LIST: o Company logo

    E-Print Network [OSTI]

    Zakharov, Vladimir

    AD CONTENT CHECK LIST: o Company logo o Address o Contact Info: Phone, web site, and/or e-mail o that will perfectly reflect your image! Acceptable Formats For Logos/Graphics/Photos High-Res (300 dpi) PDF, EPS

  7. Portland General Electric Company Pilot Evaluation and

    E-Print Network [OSTI]

    . The purposes of this pilot were to measure the load impact of turning off water heaters during peak hours, test customer acceptance of remote control of their water heater, determine the company's capability to control) was installed in each participant's home. Water heaters were shut off remotely (curtailed), using the paging

  8. Aeroseal, LLC a JMD, Inc Company

    E-Print Network [OSTI]

    Aeroseal, LLC a JMD, Inc Company 6838 Ellicott Drive East Syracuse, NY 13057 www.aeroseal.com Seal the Savings! May 26, 2011 Brady Peeks Northwest test procedure using an Aeroseal SmartSeal system. The total leakage of the duct system to the outside

  9. Automated Steel Cleanliness Analysis Tool (ASCAT)

    SciTech Connect (OSTI)

    Gary Casuccio (RJ Lee Group); Michael Potter (RJ Lee Group); Fred Schwerer (RJ Lee Group); Dr. Richard J. Fruehan (Carnegie Mellon University); Dr. Scott Story (US Steel)

    2005-12-30T23:59:59.000Z

    The objective of this study was to develop the Automated Steel Cleanliness Analysis Tool (ASCATTM) to permit steelmakers to evaluate the quality of the steel through the analysis of individual inclusions. By characterizing individual inclusions, determinations can be made as to the cleanliness of the steel. Understanding the complicating effects of inclusions in the steelmaking process and on the resulting properties of steel allows the steel producer to increase throughput, better control the process, reduce remelts, and improve the quality of the product. The ASCAT (Figure 1) is a steel-smart inclusion analysis tool developed around a customized next-generation computer controlled scanning electron microscopy (NG-CCSEM) hardware platform that permits acquisition of inclusion size and composition data at a rate never before possible in SEM-based instruments. With built-in customized ''intelligent'' software, the inclusion data is automatically sorted into clusters representing different inclusion types to define the characteristics of a particular heat (Figure 2). The ASCAT represents an innovative new tool for the collection of statistically meaningful data on inclusions, and provides a means of understanding the complicated effects of inclusions in the steel making process and on the resulting properties of steel. Research conducted by RJLG with AISI (American Iron and Steel Institute) and SMA (Steel Manufactures of America) members indicates that the ASCAT has application in high-grade bar, sheet, plate, tin products, pipes, SBQ, tire cord, welding rod, and specialty steels and alloys where control of inclusions, whether natural or engineered, are crucial to their specification for a given end-use. Example applications include castability of calcium treated steel; interstitial free (IF) degasser grade slag conditioning practice; tundish clogging and erosion minimization; degasser circulation and optimization; quality assessment/steel cleanliness; slab, billet or bloom disposition; and alloy development. Additional benefits of ASCAT include the identification of inclusions that tend to clog nozzles or interact with refractory materials. Several papers outlining the benefits of the ASCAT have been presented and published in the literature. The paper entitled ''Inclusion Analysis to Predict Casting Behavior'' was awarded the American Iron and Steel Institute (AISI) Medal in 2004 for special merit and importance to the steel industry. The ASCAT represents a quantum leap in inclusion analysis and will allow steel producers to evaluate the quality of steel and implement appropriate process improvements. In terms of performance, the ASCAT (1) allows for accurate classification of inclusions by chemistry and morphological parameters, (2) can characterize hundreds of inclusions within minutes, (3) is easy to use (does not require experts), (4) is robust, and (5) has excellent image quality for conventional SEM investigations (e.g., the ASCAT can be utilized as a dual use instrument). In summary, the ASCAT will significantly advance the tools of the industry and addresses an urgent and broadly recognized need of the steel industry. Commercialization of the ASCAT will focus on (1) a sales strategy that leverages our Industry Partners; (2) use of ''technical selling'' through papers and seminars; (3) leveraging RJ Lee Group's consulting services, and packaging of the product with a extensive consulting and training program; (4) partnering with established SEM distributors; (5) establishing relationships with professional organizations associated with the steel industry; and (6) an individualized plant by plant direct sales program.

  10. Operational improvements at Jewell Coal and Coke Company`s non-recovery ovens

    SciTech Connect (OSTI)

    Ellis, C.E.; Pruitt, C.W.

    1995-12-01T23:59:59.000Z

    Operational improvements at Jewell Coal and Coke Company over the past five years includes safety and environmental concerns, product quality, equipment availability, manpower utilization, and productivity. These improvements with Jewell`s unique process has allowed Jewell Coal and Coke Company to be a consistent, high quality coke producer. The paper briefly explains Jewell`s unique ovens, their operating mode, improved process control, their maintenance management program, and their increase in productivity.

  11. Biomass Company Sets Up Shop in High School Lab | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Biomass Company Sets Up Shop in High School Lab Biomass Company Sets Up Shop in High School Lab March 30, 2010 - 2:45pm Addthis Stephen Graff Former Writer & editor for Energy...

  12. SEP Success Story: Green Launching Pad Taps Six More Companies...

    Office of Environmental Management (EM)

    Green Launching Pad Taps Six More Companies for Take-off SEP Success Story: Green Launching Pad Taps Six More Companies for Take-off April 29, 2011 - 9:58am Addthis Yesterday, U.S....

  13. Geothermal Business on the Rise for Kansas Company | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Business on the Rise for Kansas Company Geothermal Business on the Rise for Kansas Company April 16, 2010 - 4:43pm Addthis Paul Lester Communications Specialist, Office of Energy...

  14. Special Provisions Affecting Gas, Water, or Pipeline Companies (South Carolina)

    Broader source: Energy.gov [DOE]

    This legislation confers the rights and privileges of telegraph and telephone companies (S.C. Code 58-9) on pipeline and water companies, and contains several additional provisions pertaining to...

  15. Corporate Energy Management: A Survey of Large Manufacturing Companies

    E-Print Network [OSTI]

    Norland, D. L.; Lind, L.

    Corporate practices regarding energy management vary substantially from one company to another. Some companies pay close attention to energy use throughout the corporation while others pay scant attention. This paper first describes what we call...

  16. SunShot Incubator Awardee Helps Companies Offer Discount Solar...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SunShot Incubator Awardee Helps Companies Offer Discount Solar as Employee Perk SunShot Incubator Awardee Helps Companies Offer Discount Solar as Employee Perk March 31, 2015 -...

  17. Matching Gift Companies LEHIGH UNIVERSITY 1 3M Corporation

    E-Print Network [OSTI]

    Gilchrist, James F.

    Corporation Foundation The Eaton Charitable Fund Electroline Corporation Eli Lilly and Company FoundationMatching Gift Companies LEHIGH UNIVERSITY 1 3M Corporation Abbott Laboratories Accenture Foundation Technologies, Inc. Air Products Air Products Foundation Albemarle Corporation Alcoa Foundation Alliance Capital

  18. Intern experience at URS Company: an internship report

    E-Print Network [OSTI]

    Elkarmi, Fawwaz, 1950-

    2013-03-13T23:59:59.000Z

    This report describes the author's internship experience with URS Company - Dallas, Texas, from May 1980 to May 1981. The internship company is a consulting engineering firm engaged in providing professional services...

  19. Optimal capital structure of deep sea foreign freight transportation companies

    E-Print Network [OSTI]

    Georgiadis, Vasilis

    2014-01-01T23:59:59.000Z

    This thesis aims to understand the optimal leverage range for shipping companies (maritime foreign freight transportation companies - SIC 4412), through data analysis. This study confirms that in a traditional industry ...

  20. Current Size and Remaining Market Potential of the U.S. Energy Service Company Industry

    E-Print Network [OSTI]

    Stuart, Elizabeth

    2014-01-01T23:59:59.000Z

    disadvantage compared to solar companies that are verticallydisadvantage compared to solar companies that are verticallysolar leasing models with no upfront costs). These companies

  1. Evaluation and redesign of a company's distribution network

    E-Print Network [OSTI]

    Burgos Fuentes, Sergio Armando

    2004-11-15T23:59:59.000Z

    EVALUATION AND REDESIGN OF A COMPANY?S DISTRIBUTION NETWORK A Record of Study by SERGIO ARMANDO BURGOS FUENTES Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements... for the degree of DOCTOR OF ENGINEERING August 2004 Major Subject: Engineering College of Engineering EVALUATION AND REDESIGN OF A COMPANY?S DISTRIBUTION NETWORK A Record of Study by SERGIO ARMANDO BURGOS FUENTES Approved...

  2. Pacific Gas and Electric Company_14-36-NG_3422

    Broader source: Energy.gov (indexed) [DOE]

    ) PACIFIC GAS AND ELECTRIC COMPANY ) DOCKET NO. 14-36-NG ) ORDER GRANTING BLANKET AUTHORIZATION TO IMPORT NATURAL GAS FROM...

  3. Evaluation and redesign of a company's distribution network 

    E-Print Network [OSTI]

    Burgos Fuentes, Sergio Armando

    2004-11-15T23:59:59.000Z

    EVALUATION AND REDESIGN OF A COMPANY?S DISTRIBUTION NETWORK A Record of Study by SERGIO ARMANDO BURGOS FUENTES Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements... for the degree of DOCTOR OF ENGINEERING August 2004 Major Subject: Engineering College of Engineering EVALUATION AND REDESIGN OF A COMPANY?S DISTRIBUTION NETWORK A Record of Study by SERGIO ARMANDO BURGOS FUENTES Approved...

  4. Software Quality Modeling Experiences at an Oil Company Constanza Lampasona &

    E-Print Network [OSTI]

    Basili, Victor R.

    Software Quality Modeling Experiences at an Oil Company Constanza Lampasona & Jens Heidrich by Ecopetrol, a Colombian oil and gas company. The general approach taken is illustrated and excerpts from is to become one of the 30 most important companies in the oil and gas domain by 2020. IT plays an important

  5. Company Name: Oracle Web Site: www.oracle.com

    E-Print Network [OSTI]

    New Hampshire, University of

    , current product ownership, current and future technology plans and targeted areas of opportunity To viewCompany Name: Oracle Web Site: www.oracle.com Industry: Technology Brief Company Overview: Oracle company. With more than 370,000 customers including 100 of the Fortune 100 in more than 145 countries

  6. Dutch Wholesale Company Highway 57 North Elnora, IN 47529

    E-Print Network [OSTI]

    2011 Dutch Wholesale Company Highway 57 North · Elnora, IN 47529 TOLL FREE: (800) 472-9178 · FAX States only. J enclosed is a check payable to Dutch Wholesale Company J J please send payment with your! Thank You! Dutch Wholesale Company Highway 57 North Elnora, IN 47529 Phone: (800) 472-9178 Fax: (812

  7. Kharisma Jaya Gemilang (KJG), an Indonesian company part-

    E-Print Network [OSTI]

    companies based in Asia, Africa, and South America. We are also engaged in timber trade policy initiativesKharisma Jaya Gemilang (KJG), an Indonesian company part- nering with TTAP received the Tropical verification through a variety of site visits of companies engaged in the process. Rachel But- ler, Head

  8. A Start-up company to start your career

    E-Print Network [OSTI]

    A Start-up company to start your career Professional Development Seminar March 6, 2013 #12;What is a start-up company? · Small, just started · Typically 1-5 years old · Often no products, no sales · Developing something totally new · May, or may not be a market #12;What is a start-up company? · Funding

  9. Research Investments in Large Indian Software Companies Pankaj Jalote

    E-Print Network [OSTI]

    Jalote, Pankaj

    of the company can use to improve the business. Research is typically not a business or a profit center to bring out newer products in the market place. But why does a service company need investment in researchResearch Investments in Large Indian Software Companies Pankaj Jalote Professor, Department

  10. THE STRUCTURE OF PATENT AUTHORSHIP NETWORKS IN JAPANESE MANUFACTURING COMPANIES

    E-Print Network [OSTI]

    Thawonmas, Ruck

    THE STRUCTURE OF PATENT AUTHORSHIP NETWORKS IN JAPANESE MANUFACTURING COMPANIES Kohei Tsuda, Frank of these strategies is the creation of patents, which help eliminate or contain competition. Companies seek to learn the research strategies of their competitors. At the same time, all companies try to hide their own strategies

  11. Analysis of Strategies of Companies under Carbon Constraint: Relationship between Profit Structure of Companies and Carbon/Fuel Price Uncertainty

    E-Print Network [OSTI]

    Hashimoto, Susumu

    This paper examines the relationship between future carbon prices and the expected profit of companies by case studies with model companies. As the future carbon price will vary significantly in accordance with the political ...

  12. Meeting State Carbon Emission Requirements through Industrial Energy Efficiency: The Southern California Gas Company’s Industrial End User Program

    Broader source: Energy.gov [DOE]

    This case study describes the Southern California Gas Company’s Industrial End User program, which helps large industrial customers increase energy efficiency and reduce energy use and greenhouse gas emissions.

  13. Foreign Energy Company Competitiveness: Background information

    SciTech Connect (OSTI)

    Weimar, M.R.; Freund, K.A.; Roop, J.M.

    1994-10-01T23:59:59.000Z

    This report provides background information to the report Energy Company Competitiveness: Little to Do With Subsidies (DOE 1994). The main body of this publication consists of data uncovered during the course of research on this DOE report. This data pertains to major government energy policies in each country studied. This report also provides a summary of the DOE report. In October 1993, the Office of Energy Intelligence, US Department of Energy (formerly the Office of Foreign Intelligence), requested that Pacific Northwest Laboratory prepare a report addressing policies and actions used by foreign governments to enhance the competitiveness of their energy firms. Pacific Northwest Laboratory prepared the report Energy Company Competitiveness Little to Do With Subsidies (DOE 1994), which provided the analysis requested by DOE. An appendix was also prepared, which provided extensive background documentation to the analysis. Because of the length of the appendix, Pacific Northwest Laboratory decided to publish this information separately, as contained in this report.

  14. Microstructural characterization in dissimilar friction stir welding between 304 stainless steel and st37 steel

    SciTech Connect (OSTI)

    Jafarzadegan, M. [Department of Materials Eng., Tarbiat Modares University, P.O. Box: 14115-143, Tehran (Iran, Islamic Republic of) [Department of Materials Eng., Tarbiat Modares University, P.O. Box: 14115-143, Tehran (Iran, Islamic Republic of); State Key Laboratory of Advanced Welding Production Technology, School of Materials Science and Eng., Harbin Institute of Technology, P.O. Box: 150001, Harbin (China); Feng, A.H. [State Key Laboratory of Advanced Welding Production Technology, School of Materials Science and Eng., Harbin Institute of Technology, P.O. Box: 150001, Harbin (China)] [State Key Laboratory of Advanced Welding Production Technology, School of Materials Science and Eng., Harbin Institute of Technology, P.O. Box: 150001, Harbin (China); Abdollah-zadeh, A., E-mail: zadeh@modares.ac.ir [Department of Materials Eng., Tarbiat Modares University, P.O. Box: 14115-143, Tehran (Iran, Islamic Republic of); Saeid, T. [Advanced Materials Research Center, Sahand University of Technology, P.O. Box: 51335-1996, Tabriz (Iran, Islamic Republic of)] [Advanced Materials Research Center, Sahand University of Technology, P.O. Box: 51335-1996, Tabriz (Iran, Islamic Republic of); Shen, J. [State Key Laboratory of Advanced Welding Production Technology, School of Materials Science and Eng., Harbin Institute of Technology, P.O. Box: 150001, Harbin (China)] [State Key Laboratory of Advanced Welding Production Technology, School of Materials Science and Eng., Harbin Institute of Technology, P.O. Box: 150001, Harbin (China); Assadi, H. [Department of Materials Eng., Tarbiat Modares University, P.O. Box: 14115-143, Tehran (Iran, Islamic Republic of)] [Department of Materials Eng., Tarbiat Modares University, P.O. Box: 14115-143, Tehran (Iran, Islamic Republic of)

    2012-12-15T23:59:59.000Z

    In the present study, 3 mm-thick plates of 304 stainless steel and st37 steel were welded together by friction stir welding at a welding speed of 50 mm/min and tool rotational speed of 400 and 800 rpm. X-ray diffraction test was carried out to study the phases which might be formed in the welds. Metallographic examinations, and tensile and microhardness tests were used to analyze the microstructure and mechanical properties of the joint. Four different zones were found in the weld area except the base metals. In the stir zone of the 304 stainless steel, a refined grain structure with some features of dynamic recrystallization was evidenced. A thermomechanically-affected zone was characterized on the 304 steel side with features of dynamic recovery. In the other side of the stir zone, the hot deformation of the st37 steel in the austenite region produced small austenite grains and these grains transformed to fine ferrite and pearlite and some products of displacive transformations such as Widmanstatten ferrite and martensite by cooling the material after friction stir welding. The heat-affected zone in the st37 steel side showed partially and fully refined microstructures like fusion welding processes. The recrystallization in the 304 steel and the transformations in the st37 steel enhanced the hardness of the weld area and therefore, improved the tensile properties of the joint. - Highlights: Black-Right-Pointing-Pointer FSW produced sound welds between st37 low carbon steel and 304 stainless steel. Black-Right-Pointing-Pointer The SZ of the st37 steel contained some products of allotropic transformation. Black-Right-Pointing-Pointer The material in the SZ of the 304 steel showed features of dynamic recrystallization. Black-Right-Pointing-Pointer The finer microstructure in the SZ increased the hardness and tensile strength.

  15. Status of Tampa Electric Company IGCC Project

    SciTech Connect (OSTI)

    Jenkins, S.D.

    1992-01-01T23:59:59.000Z

    Tampa Electric Company will utilize Integrated Gasification Combined Cycle technology for its new Polk Power Station Unit [number sign]1. The project is partially funded under the Department of Energy Clean Coal Technology Program Round III. This paper describes the technology to be used, process details, demonstration of a new hot gas clean-up system, and the schedule, leading to commercial operation in July 1996.

  16. Status of Tampa Electric Company IGCC Project

    SciTech Connect (OSTI)

    Jenkins, S.D.

    1992-10-01T23:59:59.000Z

    Tampa Electric Company will utilize Integrated Gasification Combined Cycle technology for its new Polk Power Station Unit {number_sign}1. The project is partially funded under the Department of Energy Clean Coal Technology Program Round III. This paper describes the technology to be used, process details, demonstration of a new hot gas clean-up system, and the schedule, leading to commercial operation in July 1996.

  17. Company Template (Fixed Support) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsNovember 13, 2014 BuildingEnergy EfficiencyPast ProjectsCommunityCompany Template

  18. Mechanical properties and microstructures of dual phase steels containing silicon, aluminum and molybdenum

    E-Print Network [OSTI]

    Neill, Thomas John O'

    2011-01-01T23:59:59.000Z

    AND MICROSTRUCTURES OF DUAL PHASE STEELS CONTAINING SILICON,and Microstructures of Dual Phase Steels Containing Silicon,microstructures of selected dual-phase steels in which the

  19. EFFECTS OF MORPHOLOGY ON THE MECHANICAL BEHAVIOR OF DUAL PHASE Fe/Si/C STEELS

    E-Print Network [OSTI]

    Kim, N.J.

    2012-01-01T23:59:59.000Z

    and ductility in dual phase steels. However, it seems thatmechanical behavior of dual phase steels. ACKNOWLEDGEMENTSL INTRODUCTION Dual phase steels whose structures consist of

  20. THE EROSION BEHAVIOR OF STEEL AS A FUNCTION OF MICROSTRUCTURE ON SOLID PARTICLE EROSION

    E-Print Network [OSTI]

    Levy, Alan V.

    2013-01-01T23:59:59.000Z

    of the spheroidized 1075 steel by rolling prior to erosionAbrasive Wear Resistance of Steels. A Review, ~Jear, FIGUREelectron micrographs of 1075 steel in the coarse pearlite,

  1. Beam Energy Scaling on Ion-Induced Electron Yield from K+ Impact on Stainless Steel

    E-Print Network [OSTI]

    2006-01-01T23:59:59.000Z

    K + Impact on Stainless Steel Michel Kireeff Covo Lawrence+ ions hit the stainless steel target with energy up to 400energies hitting stainless steel target obtained from

  2. Testing and analysis of structural steel columns subjected to blast loads

    E-Print Network [OSTI]

    Stewart, Lauren K.

    2010-01-01T23:59:59.000Z

    Blast Simulator Testing of Steel Columns and Components. ”Testing of Structural Steel Columns. ” 8 th Internationaland Analysis of Structural Steel Columns Subjected to Blast

  3. A direct displacement-based design of low-rise seismic resistant steel moment frames

    E-Print Network [OSTI]

    Harris, John L.

    2006-01-01T23:59:59.000Z

    The Bending Resistance of Steel Beams. ” J. Struct. Div. ,in the Design of Steel Structures. ” Engineering715- American Institute of Steel Construction (AISC) (2001).

  4. Cyclic behavior and design of steel columns subjected to large drift

    E-Print Network [OSTI]

    Newell, James David

    2008-01-01T23:59:59.000Z

    The Bending Resistance of Steel Beams,” Journal of the2007). “Bolted Flange Plate Steel Moment Connections forSeismic Upgrade of a 15-Story Steel Moment Frame Building –

  5. Lightweight Steel Solutions for Automotive Industry

    SciTech Connect (OSTI)

    Lee, Hong Woo; Kim, Gyosung; Park, Sung Ho [Technical Research Laboratories, POSCO, 699, Gumho-dong, Gwangyang-si, Jeonnam, 545-090 (Korea, Republic of)

    2010-06-15T23:59:59.000Z

    Recently, improvement in fuel efficiency and safety has become the biggest issue in worldwide automotive industry. Although the regulation of environment and safety has been tightened up more and more, the majority of vehicle bodies are still manufactured from stamped steel components. This means that the optimized steel solutions enable to demonstrate its ability to reduce body weight with high crashworthiness performance instead of expensive light weight materials such as Al, Mg and composites. To provide the innovative steel solutions for automotive industry, POSCO has developed AHSS and its application technologies, which is directly connected to EVI activities. EVI is a technical cooperation program with customer covering all stages of new car project from design to mass production. Integrated light weight solutions through new forming technologies such as TWB, hydroforming and HPF are continuously developed and provided for EVI activities. This paper will discuss the detailed status of these technologies especially light weight steel solutions based on innovative technologies.

  6. Case hardenable nickel-cobalt steel

    DOE Patents [OSTI]

    Qian, Yana (Sunnyvale, CA); Olson, Gregory B. (Evanston, IL)

    2012-04-17T23:59:59.000Z

    An advanced secondary hardening carburized Ni--Co steel achieves an improved case hardness of about 68-69 Rc together with nominal core hardness of about 50 Rc.

  7. Light Steel Framing: Improving the Integral Design 

    E-Print Network [OSTI]

    Amundarain, Aitor; Torero, Jose L; Usmani, Asif; Al-Remal, Ahmad M

    2006-09-11T23:59:59.000Z

    Light Steel Framing has been extensively used in cold climate countries due to its good thermal and structural behaviour. Improved thermal behaviour results in positive environmental impact essential for sustainable ...

  8. Transformation Strain and Crystallographic Texture in Steels

    E-Print Network [OSTI]

    Kundu, Saurabh

    Transformation Strain and Crystallographic Texture in Steels By Saurabh Kundu Darwin College, Cambridge University of Cambridge Department of Materials Science and Metallurgy Pembroke Street, Cambridge CB2 3QZ A dissertation submitted for the degree... , Crystallographic tex- ture of stress-affected bainite, Proceedings of the Royal Society of London A, (submitted). Saurabh Kundu March, 2007 ii Acknowledgments I am grateful to the EPSRC, UK and TATA STEEL, India for funding this project. I would also like to thank...

  9. Microstructural studies of advanced austenitic steels

    SciTech Connect (OSTI)

    Todd, J. A.; Ren, Jyh-Ching [University of Southern California, Los Angeles, CA (USA). Dept. of Materials Science

    1989-11-15T23:59:59.000Z

    This report presents the first complete microstructural and analytical electron microscopy study of Alloy AX5, one of a series of advanced austenitic steels developed by Maziasz and co-workers at Oak Ridge National Laboratory, for their potential application as reheater and superheater materials in power plants that will reach the end of their design lives in the 1990's. The advanced steels are modified with carbide forming elements such as titanium, niobium and vanadium. When combined with optimized thermo-mechanical treatments, the advanced steels exhibit significantly improved creep rupture properties compared to commercially available 316 stainless steels, 17--14 Cu--Mo and 800 H steels. The importance of microstructure in controlling these improvements has been demonstrated for selected alloys, using stress relaxation testing as an accelerated test method. The microstructural features responsible for the improved creep strengths have been identified by studying the thermal aging kinetics of one of the 16Ni--14Cr advanced steels, Alloy AX5, in both the solution annealed and the solution annealed plus cold worked conditions. Time-temperature-precipitation diagrams have been developed for the temperature range 600 C to 900 C and for times from 1 h to 3000 h. 226 refs., 88 figs., 10 tabs.

  10. Development of Steel Foam Materials and Structures

    SciTech Connect (OSTI)

    Kenneth Kremer; Anthony Liszkiewicz; James Adkins

    2004-10-20T23:59:59.000Z

    In the past few years there has been a growing interest in lightweight metal foams. Demands for weight reduction, improved fuel efficiency, and increased passenger safety in automobiles now has manufacturers seriously considering the use of metal foams, in contrast to a few years ago, when the same materials would have been ruled out for technical or economical reasons. The objective of this program was to advance the development and use of steel foam materials, by demonstrating the advantages of these novel lightweight materials in selected generic applications. Progress was made in defining materials and process parameters; characterization of physical and mechanical properties; and fabrication and testing of generic steel foam-filled shapes with compositions from 2.5 wt.% to 0.7 wt.% carbon. A means of producing steel foam shapes with uniform long range porosity levels of 50 to 60 percent was demonstrated and verified with NDE methods. Steel foam integrated beams, cylinders and plates were mechanically tested and demonstrated advantages in bend stiffness, bend resistance, and crush energy absorption. Methods of joining by welding, adhesive bonding, and mechanical fastening were investigated. It is important to keep in mind that steel foam is a conventional material in an unconventional form. A substantial amount of physical and mechanical properties are presented throughout the report and in a properties database at the end of the report to support designer's in applying steel foam in unconventional ways.

  11. Irradiation Assisted Grain Boundary Segregation in Steels

    SciTech Connect (OSTI)

    Lu, Zheng; Faulkner, Roy G. [IPTME, Loughborough University, Loughborough, Leics (United Kingdom)

    2008-07-01T23:59:59.000Z

    The understanding of radiation-induced grain boundary segregation (RIS) has considerably improved over the past decade. New models have been introduced and much effort has been devoted to obtaining comprehensive information on segregation from the literature. Analytical techniques have also improved so that chemical analysis of layers 1 nm thick is almost routine. This invited paper will review the major methods used currently for RIS prediction: namely, Rate Theory, Inverse Kirkendall, and Solute Drag approaches. A summary is made of the available data on phosphorus RIS in reactor pressure vessel (RPV) steels. This will be discussed in the light of the predictions of the various models in an effort to show which models are the most reliable and easy to use for forecasting P segregation behaviour in steels. A consequence of RIS in RPV steels is a radiation induced shift in the ductile to brittle transition temperature (DBTT). It will be shown how it is possible to relate radiation-induced P segregation levels to DBTT shift. Examples of this exercise will be given for RPV steels and for ferritic steels being considered for first wall fusion applications. Cr RIS in high alloy stainless steels and associated irradiation-assisted stress corrosion cracking (IASCC) will be briefly discussed. (authors)

  12. Nickel-free duplex stainless steels

    SciTech Connect (OSTI)

    Wang, J.; Uggowitzer, P.J.; Magdowski, R.; Speidel, M.O. [ETH-Zentrum, Zurich (Switzerland). Inst. of Metallurgy] [ETH-Zentrum, Zurich (Switzerland). Inst. of Metallurgy

    1998-12-04T23:59:59.000Z

    It is well known that nitrogen-alloying in steel produces a variety of exceptional properties such as high strength, high ductility and, eventually, resistance to stress corrosion cracking. High-nitrogen steels (HNS), therefore, have recently been developed to enhance the strength and corrosion resistance of stainless steels. However, due to a low solubility of nitrogen in a liquid steel under atmospheric pressure, the production of such high-nitrogen alloys needs high-pressure facilities that cause an extra cost. A possible route of developing high-nitrogen alloys under atmospheric pressure is to choose a duplex microstructure, where the amount of austenite and ferrite phase is nearly equal. A much lower nitrogen content is needed to maintain a 50% austenite phase compared with the necessary addition of nitrogen to reach a 100% austenitic microstructure. In addition, duplex stainless steels (DSS) with 40--60% ferrite can significantly improve the SCC-resistance. The objective of this work was to develop a new group of nickel-free, high strength and corrosion resistant DSS. Nickel was completely replaced by nitrogen in order to enhance SCC resistance and reduce the alloying element cost. The microstructure, mechanical properties, corrosion resistance and cost analysis of new alloys are investigated in comparison with some commercial stainless steels.

  13. Onsite recycling of electric arc furnace dust: The Jorgensen Steel Facility

    SciTech Connect (OSTI)

    Licis, I.J. [Environmental Protection Agency, Cincinnati, OH (United States); Bermark, R.C. [Washington State Dept. of Ecology, Olympia, WA (United States)

    1995-10-01T23:59:59.000Z

    The steel-making industry produces a large amount of Electric Arc Furnace (EAF) dust as part of normal production. This waste is listed as KO61, defined as {open_quotes}emission control dust/sludge from the primary production of steel in electric arc furnaces{close_quotes} under 40 CFR 261.32. A glass making technology called Ek Glassification{trademark} (hereafter called {open_quotes}the Process{close_quotes}) has been developed by Roger B. Ek and Associates, Inc. (hereafter called {open_quotes}the Developer{close_quotes}) to recycle EAF dust and convert it, along with other byproducts of the steel-making industry, into marketable commodities. This Process was evaluated under the Waste Reduction Innovative Technology Evaluation (WRITE) Program. The project was designed and conducted in cooperation with the Washington State Department of Environmental Quality, the Process Developer and the host test site, the Earle M. Jorgensen (EMJ) Steel Company of Seattle, Washington. Test personnel for EPA were supplied by SAIC Inc., on contract to EPA. The overall objectives of the project were to conduct a pilot scale evaluation of the Process, investigate if toxic metals are leached from the products (such as colored glass and glass-ceramics; ceramic glazes, colorants, and fillers; roofing granules and sand-blasting grit; and materials for Portland cement production). Three glass recipes (Glass I, II, and III) were designed by the developer for potential use at EMJ. The EPA portion was focused on determining the toxic metals concentrations of the Glass II recipe, evaluating the P2 impact of using this Process in comparison to traditional methods of waste treatment and disposal, and assessing the economics of both.

  14. Oil and Gas Company Oil and Gas Company Address Place Zip Website

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRoseConcernsCompany Oil and Gas Company Address Place Zip Website Abu

  15. Pennsylvania company prepares year-end review

    SciTech Connect (OSTI)

    Not Available

    1990-04-12T23:59:59.000Z

    Equitable Resources, Inc., in Pittsburgh, Pennsylvania, reports that consolidated income for calendar year 1989 was $50.9 million, or $2.43 per share, up from 1988's $47.1 million, or $2.27 per share. The difference was primarily due to a general increase in retail rates which became effective in January 1989 for distribution customers in the state. A December 1989 settlement of a pipeline subsidiary's rate increase also added to the increase. The rate increase had been in effect since 1986, but the full effect had been reserved pending the outcome of regulatory proceedings, the company stated.

  16. Maan Development Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant Jump to:LandownersLuther, Oklahoma:EnergyECO AugerMaan Development Company Jump to:

  17. First Hydro Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating A PotentialJumpGermanFife Energy Park at MethilGlobalFirstFirst Hydro Company

  18. Western Ethanol Company LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown ofNationwideWTED JumpHills, NewWestbrook, Minnesota:Western Ethanol Company LLC

  19. Category:MHK Companies | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model, click here. Category:Conceptual ModelLists for Companies" TheLists

  20. Shanghai TL Chemical Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries Pvt Ltd JumpInformationScottsOklahoma:SevinShamilTL Chemical Company Jump to:

  1. Shenzhen Chuangyin Industrial Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries Pvt LtdShawangunk, New York: Energy ResourcesShelton,Chuangyin Industrial Company

  2. Evans Capacitor Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOEHazelPennsylvania: Energy Resources(RECP) inEuricoOpenCompany Jump to:

  3. Green Hydrogen Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2,AUDIT REPORTEnergyFarms A SUKHydrogen Company Jump to: navigation, search

  4. Hydroenergy Company Ltd | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2,AUDIT REPORTEnergyFarms AHefeiHydroenergy Company Ltd Jump to: navigation,

  5. Xinjiang Wind Energy Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2,AUDITCaliforniaWeifang SwisselectronicXian Jieli ElectricHuitongCompany

  6. Wellsboro Electric Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTri GlobalJump to: navigation,Goff, 2002)Wellington Middle SchoolCompany

  7. Winslow Management Company LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTriWildcat 1 Wind Project Jump to:WilsonIIa extension679°,Manitoba:Company

  8. Property:Affiliated Companies | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroupPerfectenergyInformationProjectAffiliated Companies Jump to:

  9. Property:CompanyOwnership | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroupPerfectenergyInformationProjectAffiliated Companies

  10. OpenEI Community - Utility Companies

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRoseConcernsCompany Oil and GasOff thedriving

  11. Ovonic Battery Company Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRoseConcernsCompany OilInformationPre-TaxShelf Lands

  12. Phasor Energy Company Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRoseConcernsCompanyPCNInformation USPerseus| Open EnergyU.S. DOEII

  13. Phoenix Canada Oil Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRoseConcernsCompanyPCNInformationLumileds Lighting Co Jump to:Phoenix

  14. Corsicana Chemical Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovationinConcentratingEnergyCoosa ValleyCorsicana Chemical Company Jump

  15. DMS Company Ltd | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovationinConcentratingEnergyCoosaPageEnergyDLC+VIT4IP CountryDMS Company

  16. Woodward Governor Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells, Wisconsin: Energy ResourcesWoods County,NewWoodward Governor Company Jump

  17. Center Ethanol Company LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovation inOpenadd: China Datang CorporationCenter Ethanol Company LLC Jump

  18. Narayanpur Power Company Ltd | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |JilinLu anMicrogreenMoonNASA/AmesNSNanotectureNarayanpur Power Company

  19. Ocean Energy Company LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer PlantMunhall,Missouri: EnergyExcellence SeedNunn,andOasys WaterCity, New Jersey:OceanCompany

  20. BP Energy Company (Washington) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty EditCalifornia: EnergyAvignon, France: Energy ResourcesBurleyBLMUSFWSBP Energy Company

  1. Diablo Research Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOE Facility DatabaseMichigan:Dewey-Humboldt, Arizona:Research Company Place:

  2. Tecumseh Products Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries PvtStratosolar Jump to:HoldingsTechint Spa JumpTVC Jump to:TecogenProducts Company

  3. The Social Carbon Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries PvtStratosolarTharaldson Ethanol LLC Jump to:UncertaintySocial Carbon Company Jump

  4. JM E3 Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup | OpenHunanInformation sourceInvensysIsland GasItronJM E3 Company

  5. The Timken Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with formSoutheasternInformationPolicyREDD+ Book JumpTimken Company Jump to:

  6. Ameren Illinois Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTriWildcat Place:Alvan Blanch GreenAmeren Illinois Company Jump to:

  7. Chevron Hydrogen Company LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty EditCalifornia:PowerCER.png El CER es unaChelmsford,VolcanicChevron Hydrogen Company

  8. Community Management Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty EditCalifornia:PowerCER.png ElColumbia, NorthCommunity Management Company Jump to:

  9. Nevis Engine Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer PlantMunhall, Pennsylvania: EnergyEnergyPPCR)Nevis Engine Company Jump to: navigation,

  10. Utility Companies | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit withTianlin BaxinUmwelt Management AGUser page EditUsinasource HistoryCompanies

  11. Wisconsin River Power Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit withTianlinPapers Home Kyoung's pictureWindManitoba,Wisconsin River Power Company

  12. United Oil Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown of Ladoga, IndianaTurtleCooperative Place: Beaver Dam,PopulationOil Company

  13. AgriFuel Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2,AUDITCaliforniaWeifangwikiAgoura Hills, California:AgriFuel Company Jump

  14. High Mn austenitic stainless steel

    DOE Patents [OSTI]

    Yamamoto, Yukinori (Oak Ridge, TN) [Oak Ridge, TN; Santella, Michael L (Knoxville, TN) [Knoxville, TN; Brady, Michael P (Oak Ridge, TN) [Oak Ridge, TN; Maziasz, Philip J (Oak Ridge, TN) [Oak Ridge, TN; Liu, Chain-tsuan (Knoxville, TN) [Knoxville, TN

    2010-07-13T23:59:59.000Z

    An austenitic stainless steel alloy includes, in weight percent: >4 to 15 Mn; 8 to 15 Ni; 14 to 16 Cr; 2.4 to 3 Al; 0.4 to 1 total of at least one of Nb and Ta; 0.05 to 0.2 C; 0.01 to 0.02 B; no more than 0.3 of combined Ti+V; up to 3 Mo; up to 3 Co; up to 1W; up to 3 Cu; up to 1 Si; up to 0.05 P; up to 1 total of at least one of Y, La, Ce, Hf, and Zr; less than 0.05 N; and base Fe, wherein the weight percent Fe is greater than the weight percent Ni, and wherein the alloy forms an external continuous scale including alumina, nanometer scale sized particles distributed throughout the microstructure, the particles including at least one of NbC and TaC, and a stable essentially single phase FCC austenitic matrix microstructure that is essentially delta-ferrite-free and essentially BCC-phase-free.

  15. Development of Next Generation Heating System for Scale Free Steel Reheating

    SciTech Connect (OSTI)

    Dr. Arvind C. Thekdi

    2006-09-26T23:59:59.000Z

    Teh report describes methods of reheating of steel billets and slabs for hot rolling or forging without forming steel scale.

  16. Group Retirement Services are provided by Sun Life Assurance Company of Canada, a member of the Sun Life Financial group of Sun Life Assurance Company of Canada, 2011.

    E-Print Network [OSTI]

    Northern British Columbia, University of

    Group Retirement Services are provided by Sun Life Assurance Company of Canada, a member of the Sun Life Financial group of companies. © Sun Life Assurance Company of Canada, 2011. McLean Budden name

  17. Dislocation substructure in fatigued duplex stainless steel

    SciTech Connect (OSTI)

    Polak, J. (Ecole Centrale de Lille, Villeneuve d'Ascq (France). Lab. de Mecanique de Lille Inst. of Physical Metallurgy, Brno (Czechoslovakia). Academy of Sciences); Degallaix, S. (Ecole Centrale de Lille, Villeneuve d'Ascq (France). Lab. de Mecanique de Lille); Kruml, T. (Inst. of Physical Metallurgy, Brno (Czechoslovakia). Academy of Sciences)

    1993-12-15T23:59:59.000Z

    Cyclic plastic straining of crystalline materials results in the formation of specific dislocation structures. Considerable progress in mapping and understanding internal dislocation structures has been achieved by studying single crystal behavior: however, most structural materials have a polycrystalline structure and investigations of polycrystals in comparison to single crystal behavior of simple metals prove to be very useful in understanding more complex materials. There are some classes of materials, however, with complicated structure which do not have a direct equivalent in single crystalline form. Moreover, the specific dimensions and shapes of individual crystallites play an important role both in the cyclic stress-strain response of these materials and in the formation of their interior structure in cyclic straining. Austenitic-ferritic duplex stainless steel, which is a kind of a natural composite, is a material of this type. The widespread interest in the application of duplex steels is caused by approximately doubled mechanical properties and equal corrosion properties, when compared with classical austenitic stainless steels. Fatigue resistance of these steels as well as the surface damage evolution in cyclic straining have been studied; however, much less is known about the internal substructure development in cyclic straining. In this study the dislocation arrangement in ferritic and austenitic grains of the austenitic-ferritic duplex steel alloyed with nitrogen and cyclically strained with two strain amplitudes, is reported and compared to the dislocation arrangement found in single and polycrystals of austenitic and ferritic materials of a similar composition and with the surface relief produced in cyclic plastic straining.

  18. Laminar inclusions of duplex stainless steels

    SciTech Connect (OSTI)

    Hudson, M.E. [Fluor Daniel Canada Inc., Calgary, Alberta (Canada)

    1993-12-31T23:59:59.000Z

    Duplex Stainless Steel have been utilized in the offshore petrochemical industries for over twenty years. The steels are normally manufactured to produce a 50:50 duplex austenitic and ferritic microstructure. The microstructure yields the benefits of high strength, corrosion resistance and low thermal expansion. While constructing a high pressure header box for an air cooled heat exchanger, linear indications were observed along the weld preparation faces. These laminations were parallel to the plate surfaces, reminiscent to oxide inclusions found in carbon steel plates manufactured 20 years ago. Concern over premature failure at the highly stressed corner joints resulted in the rejection of the plates. A metallurgical investigation followed. From scanning electron microscopy and energy dispersive x-ray, the indications were shown to be rich in Cr, Mn and Si. The inclusions occurred during steel manufacturing and were most likely due to incorrect removal of oxides at the top of the ingot and/or the exclusion of a secondary remelting process. New plates were ordered with tighter production controls on steel processing. The plates were ultrasonically inspected prior to fabrication and no further problems were discovered.

  19. Electrodynamics in Iron and Steel

    E-Print Network [OSTI]

    John Paul Wallace

    2009-06-03T23:59:59.000Z

    In order to calculate the reflected EM fields at low amplitudes in iron and steel, more must be understood about the nature of long wavelength excitations in these metals. A bulk piece of iron is a very complex material with microstructure, a split band structure, magnetic domains and crystallographic textures that affect domain orientation. Probing iron and other bulk ferromagnetic materials with weak reflected and transmitted inductive low frequency fields is an easy operation to perform but the responses are difficult to interpret because of the complexity and variety of the structures affected by the fields. First starting with a simple single coil induction measurement and classical EM calculation to show the error is grossly under estimating the measured response. Extending this experiment to measuring the transmission of the induced fields allows the extraction of three dispersion curves which define these internal fields. One dispersion curve yielded an exceedingly small effective mass of 1.8 10^{-39}kg (1.3 10^{-9} m_e) for those spin waves. There is a second distinct dispersion curve more representative of the density function of a zero momentum bound state rather than a propagating wave. The third dispersion curve describes a magneto-elastic coupling to a very long wave length propagating mode. These experiments taken together display the characteristics of a high temperature Bose-Einstein like condensation that can be initiated by pumping two different states. A weak time dependent field drives the formation of coupled J=0 spin wave pairs with the reduced effective mass reflecting the increased size of the coherent state. These field can dominate induction measurements well past the Curie temperature.

  20. austenitic steel tp: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut,...

  1. afa stainless steels: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut,...

  2. austenitic steels reaction: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut,...

  3. a 285 steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut, Claude 46...

  4. aisi steel vliyanie: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut, Claude 203 Flexural...

  5. aisi 316l steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut, Claude 238 Flexural...

  6. activation austenitic steels: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut,...

  7. austenitic stainless steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut,...

  8. aisi h13 steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut, Claude 209 Flexural...

  9. austenitic steels approche: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut,...

  10. alloy steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut, Claude 357 Flexural...

  11. alloy steel weldment: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut, Claude 370 Flexural...

  12. austenitic steels wirkung: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut,...

  13. aisi-304 stainless steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut,...

  14. area stainless steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut,...

  15. austenitic steel aisi: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut,...

  16. austenitic steels final: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut,...

  17. algeciras spain steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut, Claude 311 Flexural...

  18. activation ferritic steels: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut,...

  19. activation ferritic steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut,...

  20. aged stainless steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut,...

  1. austenitic stainless steels: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut,...

  2. austenitic steel irradiated: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut,...

  3. alloy steel exposed: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut, Claude 434 Flexural...

  4. aisi52100 hardened steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut, Claude 324 Flexural...

  5. austenitic steel type: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut, Claude 120 Flexural...

  6. austenite stainless steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut,...

  7. austenitic steels amorcage: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut,...

  8. austenitic steels: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut,...

  9. alloy steel primary: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut, Claude First Page Previous Page...

  10. austenitic steels irradiated: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut,...

  11. austentic stainless steels: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made Sammut,...

  12. Climate VISION: Private Sector Initiatives: Iron and Steel: Results

    Office of Scientific and Technical Information (OSTI)

    and the Energy Information Agency website for updates. Read the U.S. Steel Industry Energy Efficiency Fact Sheet (PDF 83 KB) Download Acrobat Reader Read Steel Is The New...

  13. Transformation induced plasticity assisted steels: stress or strain affected martensitic

    E-Print Network [OSTI]

    Cambridge, University of

    Transformation induced plasticity assisted steels: stress or strain affected martensitic transformation? S. Chatterjee and H. K. D. H. Bhadeshia* Transformation induced plasticity (TRIP) assisted steels contain a small quantity of carbon enriched retained austenite, which transforms into martensite during

  14. First Structural Steel Erected at NSLS-II

    ScienceCinema (OSTI)

    None

    2010-01-08T23:59:59.000Z

    Ten steel columns were incorporated into the ever-growing framework for the National Synchrotron Light Source II last week, the first structural steel erected for the future 400,000-square-foot facility.

  15. advanced ferritic steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    behavior of ferrite and dual phase steels Engineering Websites Summary: and dual phase steels C.F. Kuang a,n , J. Li b , S.G. Zhang a , J. Wang b , H.F. Liu b , A.A....

  16. alloy ferritic steels: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    behavior of ferrite and dual phase steels Engineering Websites Summary: and dual phase steels C.F. Kuang a,n , J. Li b , S.G. Zhang a , J. Wang b , H.F. Liu b , A.A....

  17. advanced ferritic steels: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    behavior of ferrite and dual phase steels Engineering Websites Summary: and dual phase steels C.F. Kuang a,n , J. Li b , S.G. Zhang a , J. Wang b , H.F. Liu b , A.A....

  18. Friction Stir Spot Welding of Advanced High Strength Steels ...

    Energy Savers [EERE]

    Stir Spot Welding of Advanced High Strength Steels (AHSS) Friction Stir Spot Welding of Advanced High Strength Steels (AHSS) Presentation from the U.S. DOE Office of Vehicle...

  19. Structural Reliability of Bridges Elevated with Steel Pedestals

    E-Print Network [OSTI]

    Bisadi, Vahid 1980-

    2012-09-19T23:59:59.000Z

    seismic regions using statistical tests. Then, to provide a general framework, which can be applied to all bridges that are elevated with steel pedestals, this dissertation develops probabilistic capacity and demand models for steel pedestals considering...

  20. Cartwright on Causality: Methods, Metaphysics, and Modularity Daniel Steel

    E-Print Network [OSTI]

    Steel, Daniel

    Cartwright on Causality: Methods, Metaphysics, and Modularity Daniel Steel Department of Philosophy 503 S Kedzie Hall Michigan State University East Lansing, MI 48824-1032 USA Email: steel@msu.edu #12

  1. G odel's legacy in set theory John R. Steel

    E-Print Network [OSTI]

    Koellner, Peter

    GË? odel's legacy in set theory John R. Steel University of California, Berkeley August 2006 1 #12 generalizes the theory of L, has been developed. (Silver, Kunen, Mitchell, Dodd, Jensen, Martin, Steel, Woodin

  2. Must a Bayesian Accept the Likelihood Principle? Daniel Steel

    E-Print Network [OSTI]

    Fitelson, Branden

    Must a Bayesian Accept the Likelihood Principle? Daniel Steel Department of Philosophy 503 S. Kedzie Hall Michigan State University East Lansing, MI 48824-1032 Email: steel@msu.edu #12;1 1

  3. Inductive Rules, Background Knowledge, and Skepticism Daniel Steel

    E-Print Network [OSTI]

    Steel, Daniel

    Inductive Rules, Background Knowledge, and Skepticism Daniel Steel Department of Philosophy 503 S. Kedzie Hall Michigan State University East Lansing, MI 48823-1032 Email: steel@msu.edu #12;Abstract

  4. Environmental assessment for the granting of US Navy easements near Pearl Harbor and Waikele Gulch Oahu, Hawaii to Hawaiian Electric Company, Inc. Final report

    SciTech Connect (OSTI)

    Luersen, P.; Wiley, M.; Hart, J.; Kanehiro, C.; Soloway, M.

    1994-09-23T23:59:59.000Z

    This document was prepared pursuant to the National Environmental Policy Act (NEPA: and Navy regulations (OPNAVINST 5090.1B)). The document addresses environmental impacts from the proposed granting of three easements to the Hawaiian Electric Company, Inc. (HECO) for the use of Navy property near Waikele Gulch, Pearl City and the Waiau Power Plant. HECO`s proposed Waiau-CIP, Part 2, Project requires installation, operation, and maintenance of steel transmission line poles and associated equipment on three Navy parcels crossed by the 7.8 mile project. Health risks from exposure to the electric and magnetic fields of 138-kV transmission lines are discussed.

  5. QER- Comment of Pacific Gas and Electric Company

    Broader source: Energy.gov [DOE]

    PG&E is committed to protecting our customers' privacy. To learn more, please visit http://www.pge.com/about/company/privacy/customer/

  6. Asset Score Webinar Slides: Energy Efficiency Services Companies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Score Webinar Slides: Energy Efficiency Services Companies The Asset Score is a free, web-based software tool developed by DOE and the Pacific Northwest National Laboratory...

  7. Thirteen Major Companies Join Energy Department's Workplace Charging...

    Energy Savers [EERE]

    electric vehicles is expanding dramatically, giving drivers more options to save money on gasoline while reducing carbon pollution," said Secretary Chu. "These 13 companies are...

  8. Campbell Soup Company: Harmonizing Processes and Empowering Workers

    E-Print Network [OSTI]

    Ross, Jeanne W.

    2008-06-01T23:59:59.000Z

    In 2007 Campbell Soup Company was implementing Project Harmony: a multi-year effort to implement SAP and create more standardized and integrated business processes across

  9. Model Energy Service Company Pre-Qualification Contract

    Broader source: Energy.gov [DOE]

    This page contains information and documents for creating a contract between an Energy Service Company and a state energy office (or other entity managing a performance contracting program).

  10. US Energy Service Company Industry: History and Business Models

    Broader source: Energy.gov (indexed) [DOE]

    Energy Service Company Industry: History and Business Models Don Gilligan President, NAESCO May 6, 2011 Overview of Presentation * US ESCO industry evolution: Five phases *...

  11. Dutch Company Powers Streetlights With Living Plants; Will Your...

    Open Energy Info (EERE)

    Dutch Company Powers Streetlights With Living Plants; Will Your Cell Phone Be Next? Home > Groups > OpenEI Community Central Dc's picture Submitted by Dc(266) Contributor 16...

  12. Gas Companies Operating Within the State of Connecticut (Connecticut)

    Broader source: Energy.gov [DOE]

    These regulations apply a broad definition of “gas company”, which includes any person or entity involved in the manufacture or transportation of gas within Connecticut. The regulations set...

  13. Geothermal: Sponsored by OSTI -- ESMERALDA ENERGY COMPANY FINAL...

    Office of Scientific and Technical Information (OSTI)

    ESMERALDA ENERGY COMPANY FINAL SCIENTIFIC TECHNICAL REPORT, January 2008, EMIGRANT SLIMHOLE DRILLING PROJECT, DOE GRED III (DE-FC36-04GO14339) Geothermal Technologies Legacy...

  14. AEP Public Service Company of Oklahoma- Residential Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    The Public Service Company of Oklahoma (PSO), an electric utility, encourages residential energy efficiency under a variety of incentive programs. General rebates for HVAC equipment, appliances and...

  15. Sandia National Laboratories: Public Service Company of New Mexico

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Public Service Company of New Mexico Electric Car Challenge Sparks Students' STEM Interest On January 9, 2015, in Energy, Energy Storage, News, News & Events, Partnership,...

  16. New Energy Dept., Berkeley Lab Report on Energy Service Company...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Lawrence Berkeley National Laboratory today released a new report on the market size, trends and growth projections for America's energy service company (ESCO)...

  17. Laclede Gas Company- Residential High Efficiency Heating Rebate Program

    Broader source: Energy.gov [DOE]

    Laclede Gas Company offers various rebates to residential customers for investing in energy efficient equipment and appliances. Residential customers can qualify for rebates on boilers, furnaces,...

  18. Peninsula Light Company- Commercial Efficient Lighting Rebate Program

    Broader source: Energy.gov [DOE]

    Peninsula Light Company (PLC) offers a rebate program for commercial customers who wish to upgrade to energy efficient lighting. Participating customers must be served by PLC commercial service....

  19. Peninsula Light Company- Residential Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    Peninsula Light Company offers a rebate program for residential customers who want to install energy efficient products in homes. Rebates are provided for window replacements, water heaters, heat...

  20. Joint Maintenance Status Report of Potomac Electric Power Company...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    amd PJM Interconnection, LLC Docket No. EO-05-01: Potomac Electric Power Company ("Pepco") and PJM Interconnection, L.L.C. ("PJM") hereby jointly submit this Maintenance...

  1. EECBG Success Story: Seven Cities and a Utility Company Team...

    Broader source: Energy.gov (indexed) [DOE]

    management software company OPOWER to help nearly 100,000 residents reduce their home energy consumption. The program, which was made possible in part by Energy Efficiency and...

  2. Enhanced Inclusion Removal from Steel in the Tundish

    SciTech Connect (OSTI)

    R. C. Bradt; M.A.R. Sharif

    2009-09-25T23:59:59.000Z

    The objective of this project was to develop an effective chemical filtering system for significantly reducing the content of inclusion particles in the steel melts exiting the tundish for continuous casting. This project combined a multi-process approach that aimed to make significant progress towards an "inclusion free" steel by incorporating several interdependent concepts to reduce the content of inclusions in the molten steel exiting the tundish for the caster. The goal is to produce "cleaner" steel.

  3. The anisotropic fatigue behaviour of forged steel ETIENNE PESSARDa

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    . This variation has been reported as being 35% for 42CrMo4 steel [7] and 15% for a duplex stainless steel [4] From in the matrix. For instance, Mateo and Lütjering [3-4] showed that for a duplex stainless steel and an aluminium(°)/D(0°) Mateo Duplex Stainless Steel Yield Stress= 610MPa Lütjering Al 7475 Yield Stress= 450MPa

  4. Auto/Steel Partnership: Hydroforming Materials and Lubricant...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lightweight Rear Chassis Structures Future Generation Passenger Compartment AutoSteel Partnership: Hydroforming Materials and Lubricant Lightweight Rear Chassis Structures...

  5. Iron and steel industry process model

    SciTech Connect (OSTI)

    Sparrow, F.T.; Pilati, D.; Dougherty, T.; McBreen, E.; Juang, L.L.

    1980-01-01T23:59:59.000Z

    The iron and steel industry process model depicts expected energy-consumption characteristics of the iron and steel industry and ancillary industries for the next 25 years by means of a process model of the major steps in steelmaking, from ore mining and scrap recycling to the final finishing of carbon, alloy, and stainless steel into steel products such as structural steel, slabs, plates, tubes, and bars. Two plant types are modeled: fully integrated mills and mini-mills. User-determined inputs into the model are as follows: projected energy and materials prices; projected costs of capacity expansion and replacement; energy-conserving options, both operating modes and investments; the internal rate of return required on investment; and projected demand for finished steel. Nominal input choices in the model for the inputs listed above are as follows: National Academy of Sciences Committee on Nuclear and Alternative Energy Systems Demand Panel nominal energy-price projections for oil, gas, distillates, residuals, and electricity and 1975 actual prices for materials; actual 1975 costs; new technologies added; 15% after taxes; and 1975 actual demand with 1.5%/y growth. The model reproduces the base-year (1975) actual performance of the industry; then, given the above nominal input choices, it projects modes of operation and capacity expansion that minimize the cost of meeting the given final demands for each of 5 years, each year being the midpoint of a 5-year interval. The output of the model includes the following: total energy use and intensity (Btu/ton) by type, by process, and by time period; energy conservation options chosen; utilization rates for existing capacity; capital-investment decisions for capacity expansion.

  6. Corrosion of carbon steels, stainless steels, and titanium in aqueous lithium bromide solution

    SciTech Connect (OSTI)

    Guinon, J.L.; Garcia-Anton, J.; Perez-Herranz, V. (Univ. Politecnica de Valencia (Spain). Dept. de Ingenieria Quimica y Nuclear); Lacoste, G. (ENSIGC, Toulouse (France))

    1994-03-01T23:59:59.000Z

    Effects of lithium bromide (LiBr) concentration, pH, temperature, exposure time, and the action of some inhibitors on corrosion of several carbon (C) steels, stainless steels (SS), and a titanium (Ti) alloy were studied. Corrosion rates were determined by the polarization resistance method and compared to rates determined by weight-loss measurements. Pitting potentials (E[sub p]) were evaluated in neutral LiBr solution and with different inhibitors. Pit density and average pit depth depended on the metal tested, with lowest values for Ti, the next lowest values for type 316 SS (UNS S31600), and the highest values for UNS G41350 tempered steel.

  7. CE 4990 -Construction Scheduling Week 1: Steel Frame Project

    E-Print Network [OSTI]

    Mukherjee, Amlan

    CE 4990 - Construction Scheduling Week 1: Steel Frame Project Fall 2011 January 13, 2012 Introduction You are a construction manager for a project to build a steel frame for an office building1 of 964 pre-fabricated structural steel members will be used in the construction. The standard bay size

  8. Model coupling friction and adhesion for steel-concrete interfaces

    E-Print Network [OSTI]

    Boyer, Edmond

    Model coupling friction and adhesion for steel- concrete interfaces Michel Raous Laboratoire de: In this paper the interface behaviour between steel and concrete, during pull out tests, is numerically a variable friction coefficient in order to simulate the behaviour of the steel-concrete interface during

  9. Water Modeling of Steel Flow, Air Entrainment and Filtration

    E-Print Network [OSTI]

    Beckermann, Christoph

    Water Modeling of Steel Flow, Air Entrainment and Filtration Christoph Beckermann Associate Beckermann, C., "Water Modeling of Steel Flow, Air Entrainment and Filtration," in Proceedings of the 46th, 1992. #12;Abstract This paper presents an analysis of water modeling of steel pouring to study (1) air

  10. 1D subsurface electromagnetic fields excited by energized steel casing

    E-Print Network [OSTI]

    Torres-Verdín, Carlos

    1D subsurface electromagnetic fields excited by energized steel casing Wei Yang1 , Carlos Torres the possibility of enabling steel-cased wells as galvanic sources to detect and quantify spatial variations of electrical conductivity in the subsurface. The study assumes a vertical steel-cased well that penetrates

  11. Reuse of steel and aluminium without melting

    E-Print Network [OSTI]

    Cooper, Daniel

    2014-01-07T23:59:59.000Z

    -of-life metal components that could be reused for each product, the catalogue formed the basis of a set of semi-structured interviews with industrial experts. The results suggest that approximately 30% of steel and aluminium used in current products could... Allwood J.M., Cullen J.M., Cooper D.R., Milford R.L., Patel A.C.H., Carruth M.A., McBrien M., 2010. Conserving our metal energy: avoiding melting steel and aluminium scrap to save energy and carbon. University of Cambridge, ISBN 978-0-903428-30-9 Allwood...

  12. Carbon Diffusion Across Dissimilar Steel Welds

    E-Print Network [OSTI]

    Race, Julia Margaret

    1992-12-08T23:59:59.000Z

    CrMo 0.056 0.40 0.77 0.010 0.012 1.11 0.44 0.035 0.015 lCr1MolV 0.13 0.23 0.50 0.033 0.055 0.41 0.58 0.25 0.252 2 4 Table 1.2: Typical compositions of the commonly used high strength low alloy steels. 1.3.2 High Cr ferritie steels Increasing...

  13. The Signifance of Retained Austenite in Steels

    E-Print Network [OSTI]

    Bhadeshia, H K D H

    1980-02-05T23:59:59.000Z

    . Introduction 90 2. Experimental Method and Techniques 91 3. Results and Discussion 92 4. Summary 94 VIII. An Analysis o£ the Mechanical Properties and Microstructure o£ a High-Silicon Dual-Phase Steel 1. Introduction 2. De£ormation Models 3. Experimental... £ects such that the extent o£ twinning was the greatest when adjacent martensite units had twin-related lattices. The thermodynamics o£ dislocated martensites have been briefly examined, The inhomogeneous de£ormation behaviour o£ dual-phase steels has been analysed in terms...

  14. Interim storage cask (ISC), a concrete and steel dry storage cask

    SciTech Connect (OSTI)

    Grenier, R.M.; Koploy, M.A. [General Atomics, San Diego, CA (United States)

    1995-12-31T23:59:59.000Z

    General Atomics (GA) has designed and is currently fabricating the Interim Storage Cask (ISC) for Westinghouse Hanford Company (WHC). The ISC is a dry storage cask that will safely store a Core Component Container (CCC) with Fast Flux Test Facility (FFTF) spent fuel assemblies or fuel pin containers for a period of up to 50 years at the US Department of Energy (DOE) Hanford site. The cask may also be used to transfer the fuel to different areas within the Hanford site. The ISC is designed to stringent criteria from both 10CFR71 and 10CFR72 for safe storage and on-site transportation of FFTF spent fuel and fuel pin containers. The cask design uses a combination of steel and concrete materials to achieve a cost-effective means of storing spent fuel. The casks will be extensively tested before use to verify that the design and construction meet the design requirements.

  15. The Davey Tree Expert Company Davey Foundation Arbor Grant Program

    E-Print Network [OSTI]

    of intent explaining future plans and financial need must be attached. Grades do not have to be fromThe Davey Tree Expert Company Davey Foundation Arbor Grant Program Purpose To provide financial Administrator, Education and Training Services The Davey Tree Expert Company 1500 North Mantua Street Kent, Ohio

  16. Faculty of MANAGEMENT Alberta Oil & Gas Company1

    E-Print Network [OSTI]

    Nakayama, Marvin K.

    Faculty of MANAGEMENT Alberta Oil & Gas Company1 Daphne Jackson, operations manager for Alberta Oil & Gas Company (AOGC) hangs up the phone in her home. Her boss, Will Russell, has phoned from Calgary's interest in the Waptaman oil field. Ordinarily, Will would lead such negotiations himself, but he has been

  17. The Boeing Company Project Fuel Tank Design Project Recap

    E-Print Network [OSTI]

    Demirel, Melik C.

    which consist of a 15o double angle displacement, 10 to 12 oscillations per minute oscillation frequencyThe Boeing Company Project Fuel Tank Design Project Recap The Boeing Company came to the Pennsylvania State University with a project for the mitigation of fuel slosh by utilizing different baffle

  18. Internet Security Systems, an IBM Company Threat Insight Monthly

    E-Print Network [OSTI]

    Internet Security Systems, an IBM Company X-Force ® Threat Insight Monthly www . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Contents www.iss.netwww.iss.net Internet Security Systems, an IBM Company X-Force Threat Insight Monthly April 2007 #12;X-Force® Threat Insight Monthly > April 2007 www.iss.netwww.iss.net About

  19. The Cost of Power Disturbances to Industrial & Digital Economy Companies

    E-Print Network [OSTI]

    Schrijver, Karel

    's Consortium for Electric Infrastructure for a Digital Society (CEIDS) By 1001 Fourier Drive, Suite 200 MadisonThe Cost of Power Disturbances to Industrial & Digital Economy Companies Submitted to: EPRI To Client #12;The Cost of Power Disturbances to Industrial & Digital Economy Companies Confidential

  20. Vet’s company installing solar across Massachusetts

    Broader source: Energy.gov [DOE]

    Dan Leary, a U.S. Army veteran, is president of Nexamp Inc., a clean energy company that specializes in solar installation. Dan founded the company in 2006 and has witnessed its impressive growth from six employees to 65 and counting as of July 2010.

  1. Company name PhiloMetron, Inc. Contact name Carl Edman

    E-Print Network [OSTI]

    Wang, Deli

    description of your company PhiloMetron is a technology incubator with a primary focus on wireless "smart band-aids". We are located in Sorrento Valley. Our first spinout company, Corventis, is focused on at-home heart failure and arrhymia markets. Our current platform derives and expands from this core physiological

  2. The corrosion of some stainless steels in a marine mud

    SciTech Connect (OSTI)

    Francis, R.; Byrne, G. [Weir Materials and Foundries Park Works, Manchester (United Kingdom); Campbell, H.S. [Univ. of Surrey (United Kingdom). Dept. of Materials Science and Engineering

    1999-11-01T23:59:59.000Z

    The report presents the results for three alloys: carbon steel, 316L stainless steel and a proprietary super duplex stainless steel (UNS S32760), exposed in a marine mud off the south coast of England for 5 years. Analysis of the mud showed it to be very aggressive using a corrosion index developed at the University of Manchester. Carbon steel showed a typical corrosion rate for microbial attack with pits up to 0.64mm deep. The 316L stainless steel had extensive broad, shallow attack with a few, deeper pits. The Z100 parent pipe and weldments showed no evidence of corrosion attack.

  3. The state of the energy service company today

    SciTech Connect (OSTI)

    Mozzo, M.A. Jr.

    1998-10-01T23:59:59.000Z

    Energy service companies have been around for several years. Every year, experts predict their demise. The traditional energy service company (ESCo), whose work utilizes utility rebates, will probably be long gone as rebates disappear. The new energy service company will arise in this industry. This new company will be one that can provide a vast menu of services to their customers. These services can include, but are not necessarily limited to, the following: (1) corporate energy management services, (2) natural gas transportation services, (3) electrical deregulation services, (4) energy engineering services, (5) economics and forecasting, and (6) project financing. The new energy service company must have the engineering, financial, and managerial resources and skills to provide these services. It must also have the ability to recognize the needs of a changing industry and adapt to these changes in order to survive and ultimately provide a benefit to society.

  4. Microstructural Evolution in Power Plant Steels

    E-Print Network [OSTI]

    Cambridge, University of

    energy of the steam is converted to electrical energy by a system of turbines and a generator. Figure 2 temperature as possible. Progress in power-plant alloy design has allowed T1 to be increased from 370 C Steels Pump Cooling water Cooling water Electrical output Condenser Reheat Coal Boiler Superheater Ash HP

  5. Extraordinary Ductility in Albearing TRIP Steel

    E-Print Network [OSTI]

    Cambridge, University of

    .K. Abstract An iron­based alloy system has been developed which exhibits impressive combina- tions of tensile is research in progress on the stronger steels in order to enhance ductility and assess other engineering cooling transformation (DeCooman, 2004; Jacques, 2004; Matsumura et al., 1987a,b; Sakuma et al., 1991

  6. Selection of Processes for Welding Steel Rails

    E-Print Network [OSTI]

    Eagar, Thomas W.

    ...._ _) Selection of Processes for Welding Steel Rails by N.S. Tsai* and T.W. Eagar* ABSTRACT 421 The advantages and limitations ofseveral conventional and prospective rail welding processes are reviewed with emphasis on the heat input rate, on joint preparation, on post weld grinding and on resultant metallurgical

  7. Weldment for austenitic stainless steel and method

    DOE Patents [OSTI]

    Bagnall, Christopher (Hempfield, PA); McBride, Marvin A. (Hempfield, PA)

    1985-01-01T23:59:59.000Z

    For making defect-free welds for joining two austenitic stainless steel mers, using gas tungsten-arc welding, a thin foil-like iron member is placed between the two steel members to be joined, prior to making the weld, with the foil-like iron member having a higher melting point than the stainless steel members. When the weld is formed, there results a weld nugget comprising melted and then solidified portions of the joined members with small portions of the foil-like iron member projecting into the solidified weld nugget. The portions of the weld nugget proximate the small portions of the foil-like iron member which project into the weld nugget are relatively rich in iron. This causes these iron-rich nugget portions to display substantial delta ferrite during solidification of the weld nugget which eliminates weld defects which could otherwise occur. This is especially useful for joining austenitic steel members which, when just below the solidus temperature, include at most only a very minor proportion of delta ferrite.

  8. The Steel Market Today And Tomorrow

    E-Print Network [OSTI]

    Eagar, Thomas W.

    a liability as a benefit. Mature Industry Many observers suggest that the metals industry is based on old straddled the traditional metals industries, as well as the newer "high technol- ogy'' industries, the claim problems have been solved." For example, the scrap rate for the steel industry is extremely low, esp~ dally

  9. Must we use ferritic steel in TBM?

    SciTech Connect (OSTI)

    Salavy, Jean-Francois; Boccaccini, Lorenzo V.; Chaudhuri, Paritosh; Cho, Seungyon; Enoeda, Mikio; Giancarli, Luciano; Kurtz, Richard J.; Luo, Tian Y.; Rao, K. Bhanu Sankara; Wong, Clement

    2010-12-13T23:59:59.000Z

    Mock-ups of DEMO breeding blankets, called Test Blanket Modules (TBMs), inserted and tested in ITER in dedicated equatorial ports directly facing the plasma, are expected to provide the first experimental answers on the necessary performance of the corresponding DEMO breeding blankets. Several DEMO breeding blanket designs have been studied and assessed in the last 20 years. At present, after considering various coolant and breeder combinations, all the TBM concepts proposed by the seven ITER Parties use Reduced-Activation Ferritic/Martensitic (RAFM) steel as the structural material. In order to perform valuable tests in ITER, the TBMs are expected to use the same structural material as corresponding DEMO blankets. However, due to the fact that this family of steels is ferromagnetic, their presence in the ITER vacuum vessel will create perturbations of the ITER magnetic fields that could reduce the quality of the plasma confinement during H-mode. As a consequence, a legitimate question has been raised on the necessity of using RAFM steel for TBMs structural material in ITER. By giving a short description of the main TBM testing objectives in ITER and assessing the consequences of not using such a material, this paper gives a comprehensive answer to this question. According to the working group author of the study, the use of RAFM steel as structural material for TBM is judged mandatory.

  10. Energy Flow Models for the Steel Industry

    E-Print Network [OSTI]

    Hyman, B.; Andersen, J. P.

    Energy patterns in the U. S. steel industry are examined using several models. First is an end-use model based on data in the 1994 Manufacturing Energy Consumption Survey (MECS). Then a seven-step process model is presented and material flow through...

  11. Transformation texture of allotriomorphic ferrite in steel

    E-Print Network [OSTI]

    Cambridge, University of

    Transformation texture of allotriomorphic ferrite in steel D. W. Kim1 , R. S. Qin1 and H. K. D. H into that of the product is mathematically defined. This is not the case when the ferrite forms by a reconstructive mechanism. The allotriomorphic ferrite nucleates heterogeneously at austenite grain boundaries, and although

  12. Avoid stainless steel failures in FGD systems

    SciTech Connect (OSTI)

    Mills, J.P.; Schillmoller, C.M.

    1995-11-01T23:59:59.000Z

    Preventing pitting and localized corrosion is the key to success where low maintenance and high reliability are rime considerations in flue-gas desulfurization (FGD) designs. Knowing when to use a stainless steel, and when not to, is crucial. Operating parameters and environmental factors greatly affect alloy performance, especially pH, temperature, and chloride and oxygen levels. Failures of stainless steels can be avoided by understanding their limits in light of these variables. This article will focus on the capabilities of Types 316L, 317L, 317LM, 317LMN, 904L, and 6% Mo stainless steels and their applications, as well as provide details on unique combination of mechanical properties and corrosion resistance of the 22% Cr duplex and 25% Cr super-duplex stainless steels in acid chloride systems. Guidelines will be presented on methods to prevent intergranular corrosion, stress corrosion cracking, and pitting and crevice corrosion, and what process steps can be taken to assure reasonable performance of marginal alloy selections. Emphasis will be on the lime/limestone wet scrubbing process and the quencher/absorber.

  13. Modelling of Simultaneous Transformations in Steels

    E-Print Network [OSTI]

    Cambridge, University of

    submitted for the degree of Doctor of Philosophy Department of Materials Science and Metallurgy Univesity of Professor H. K. D. H. Bhadeshia in the Department of Materi- als Science and Metallurgy, University in the proceedings of the conference on New Development on Metallurgy and Applications of High Strength Steels

  14. Modelling Precipitation of Carbides in Martensitic Steels

    E-Print Network [OSTI]

    Cambridge, University of

    of Materials Science and Metallurgy, University of Cambridge, between October 2000 and November 2003. Except facilities in the Department of Materials Science and Metallurgy at the University of Cambridge. I would like of the physical metallurgy of secondary hardening steels and the phenomena of hydrogen embrittlement and hydrogen

  15. Mechanical Behavior and Microstructural Development of Low-Carbon Steel and Microcomposite Steel Reinforcement Bars Deformed under Quasi-Static and Dynamic Shear Loading

    E-Print Network [OSTI]

    2009-01-01T23:59:59.000Z

    pp. 66–77. 44. G. Krauss: Steels: Processing, Structure, andConf. Super High Strength Steels, AIM, Rome, Italy, 2005,cation for Epoxy-Coated Steel Reinforcing Bars,’’ Annual

  16. Crack stability analysis of low alloy steel primary coolant pipe

    SciTech Connect (OSTI)

    Tanaka, T.; Kameyama, M. [Kansai Electric Power Company, Osaka (Japan); Urabe, Y. [Mitsubishi Heavy Industries, Ltd., Takasago (Japan)] [and others

    1997-04-01T23:59:59.000Z

    At present, cast duplex stainless steel has been used for the primary coolant piping of PWRs in Japan and joints of dissimilar material have been applied for welding to reactor vessels and steam generators. For the primary coolant piping of the next APWR plants, application of low alloy steel that results in designing main loops with the same material is being studied. It means that there is no need to weld low alloy steel with stainless steel and that makes it possible to reduce the welding length. Attenuation of Ultra Sonic Wave Intensity is lower for low alloy steel than for stainless steel and they have advantageous inspection characteristics. In addition to that, the thermal expansion rate is smaller for low alloy steel than for stainless steel. In consideration of the above features of low alloy steel, the overall reliability of primary coolant piping is expected to be improved. Therefore, for the evaluation of crack stability of low alloy steel piping to be applied for primary loops, elastic-plastic future mechanics analysis was performed by means of a three-dimensioned FEM. The evaluation results for the low alloy steel pipings show that cracks will not grow into unstable fractures under maximum design load conditions, even when such a circumferential crack is assumed to be 6 times the size of the wall thickness.

  17. LBNL/ Adopt Fall Protection Program 2010 Here is the Company Letter Certification Template to address if your company has

    E-Print Network [OSTI]

    Eisen, Michael

    LBNL/ Adopt Fall Protection Program 2010 Here is the Company Letter Certification Template to address if your company has decided to work under LBNL fall protection program. See attached Chapter 30 protection matrix. All fall protection equipment will be inspected before work begins by LBNL SME of fall

  18. Position: Polymer Chemist Company: ExxonMobil Research and Engineering Company, a wholly owned subsidiary of Exxon Mobil

    E-Print Network [OSTI]

    Alpay, S. Pamir

    candidate will apply his or her knowledge to improve existing olefin-based products and develop new ones productive collaborations internally and with outside research organizations, and grow new science areas. JobPosition: Polymer Chemist Company: ExxonMobil Research and Engineering Company, a wholly owned

  19. Decontamination and decarburization of stainless and carbon steel by melt refining

    SciTech Connect (OSTI)

    Mizia, R.E.; Worcester, S.A.; Twidwell, L.G.; Webber, D.; Paolini, D.J.; Weldon, T.A.

    1996-09-05T23:59:59.000Z

    With many nuclear reactors and facilities being decommissioned in the next ten to twenty years the concern for handling and storing Radioactive Scrap Metal (RSM) is growing. Upon direction of the DOE Office of Environmental Restoration and Waste Management, Lockheed Idaho Technology Company (LITCO) is developing technologies for the conditioning of spent fuels and high-level wastes for interim storage and repository acceptance, including the recycling of Radioactive Scrap Metals (RSM) for beneficial reuse with the DOE complex. In February 1993, Montana Tech of the University of Montana was contracted to develop and demonstrate technologies for the decontamination of stainless steel RSM. The general objectives of the Montana Tech research program included conducting a literature survey, performing laboratory scale melt refining experiments to optimize decontaminating slag compositions, performing an analysis of preferred melting techniques, coordinating pilot scale and commercial scale demonstrations, and producing sufficient quantities of surrogate-containing material for all of the laboratory, pilot and commercial scale test programs. Later on, the program was expanded to include decontamination of carbon steel RSM. Each research program has been completed, and results are presented in this report.

  20. Energy service company opportunities get hotter

    SciTech Connect (OSTI)

    Barrett, L.B. [Barrett Consulting Associates, Inc., Colorado Springs, CO (United States)

    1995-08-01T23:59:59.000Z

    An option of growing interest to utilities and their customers is the energy service company or ESCO. It typically provides or coordinates several energy services including performing energy audits or analyses, designing and engineering of retrofit projects, managing the installation of more efficient equipment, and maintaining systems for optimal performance. Perhaps the key distinguishing feature of an ESCO is financing that allows the customer to avoid or reduce first costs and pay for the energy services through savings on electric and fuel bills. By paying for the energy services through savings on energy bills, the arrangement becomes a performance contract. It is difficult to find a major utility in North America that is not considering establishing or working with an ESCO. Many have made that commitment and many more are likely to do so. From the perspective of the facility owner, the increased presence of ESCOs will present some challenges in determining the best option, but the rewards for selecting an ESCO of high quality and reliability should be worth it. A facility manager considering a contract with an ESCO that is not a utility subsidiary should call their local utility for comparative information. A facility manager considering a contract with an ESCO that is a utility subsidiary should be aware that other organizations may be able to provide equivalent services.

  1. Energy service companies -- The sky's the limit

    SciTech Connect (OSTI)

    Fraser, M.; Montross, C.

    1998-07-01T23:59:59.000Z

    The term ESCO has a different meaning to different people. Increasingly, the term is used in its broadest sense to describe any company providing services related to a customer's energy acquisition and use. Previously, the term ESCO was synonymous with contractors who installed new equipment that was paid for by the energy cost savings that resulted. As a result of competition, restructuring and de-regulation of the electricity and gas sectors, the range of firms offering energy services now includes: local utilities using services to retain customers, remote utilities offering services to customers outside their franchise as a door opener to future commodity sales, local and remote utilities who see services as a more lucrative growth opportunity than commodities or transportation of the commodity, facility managers taking advantage of outsourcing trends and using energy management to reduce costs, power marketers, power brokers, aggregators combining energy analysis to segment their customers with processes to identify potential conservation and load management opportunities, cogeneration developers, and agents who help their customers navigate the uncharted waters of the deregulated energy business. This paper will review the impact of the broader definition of ESCOs with a view toward forecasting future trends in the industry including consideration of the fact that the term, energy service, may, itself, be too narrow a definition for a successful business of industry.

  2. Appraisal Seattle, Renton and Southern Railway Company

    E-Print Network [OSTI]

    Fletcher, John H.

    1913-01-01T23:59:59.000Z

    r e a s o n a b l y co r r ec t . * however , your e n g i n e e r was den i ed a c c e s s t o t h e company 's r e c o r d s , thus making the work doubly ha rd , and i m p o s s i b l e i n some p a r t i c u l a r s t o s e c u r e d e f i n i... a l u a t i o n t h e r e o f . Now, T h e r e f o r e , Be i t r e s o l v e d by t h e C i t y o f S e a t t l e as f o l l o w s ; S e c t i o n 1. T h a t t h e Boa rd of P u b l i c Works be and i t h e r e b y i s a u t h o r i z e d and d...

  3. Design for implementation : redesigning a planning process in a multinational company

    E-Print Network [OSTI]

    Azrielant, Liron

    2011-01-01T23:59:59.000Z

    As a consumer-packaged-goods company dealing with multiple suppliers, "Company X" (the company's real name has been disguised) has a clear need for an accurate raw material forecast. The current planning process has not ...

  4. ARCO Chemical Company Research and Engineering Center, "The Meadows" [The Inhabited Landscape: An Exhibition

    E-Print Network [OSTI]

    Ltd., Hanna/Olin

    1988-01-01T23:59:59.000Z

    D ARCO Chemical Company Research and Engineering C e n t eA R C O Chemical Company Research and Engineering Center, "A ARCO Chemical Company Research and Engineering Center, " T

  5. Microscale investigation of the corrosion performances of low-carbon and stainless steels in highly alkaline concretes

    E-Print Network [OSTI]

    Itty, Pierre-Adrien

    2012-01-01T23:59:59.000Z

    FILM FORMED ON DUPLEX STAINLESS STEEL IN HIGHLY ALKALINEouter-layer. On duplex stainless steel (UNS S32101), theto corrosion. Finally, duplex stainless steels contain both

  6. Performance of steel-polymer and ceramic-polymer layered composites and concrete under high strain rate loadings

    E-Print Network [OSTI]

    Samiee, Ahsan

    2010-01-01T23:59:59.000Z

    Performance of Steel-Polyurea Bi-layers Subjected to Impul-Performance of Steel-Polymer-Steel Sandwich Structures Sub- jected to Impulsive

  7. Fabrication procedure effects on fatigue resistance of rib -to-deck welded joints of steel orthotropic bridge decks

    E-Print Network [OSTI]

    Sim, Hyoung-Bo

    2010-01-01T23:59:59.000Z

    details of orthotropic steel deck. ” Proc. , Internationalnew approaches to fatigue evaluation of steel bridges. ”International Journal of Steel Structures, KSSC, Vol. 6, No.

  8. Micromechanisms of ductile fracturing of DH-36 steel plates under impulsive loads and influence of polyurea reinforcing

    E-Print Network [OSTI]

    Amini, M. R.; Nemat-Nasser, S.

    2010-01-01T23:59:59.000Z

    of ductile fracturing of DH-36 steel plates under impulsiveductile fracturing of DH-36 steel plates subjected to blast-microstructure of the deformed steel samples also revealed

  9. Thinking globally - acting locally an energy company`s response to land stewardship

    SciTech Connect (OSTI)

    McIntyre, D. [Sasaki Associates, Inc., Watertown, MA (United States)

    1995-12-01T23:59:59.000Z

    This paper explores the application of contemporary land use planning principles in the Kingdom of Saudi Aramco, the world`s largest oil company, relative to Company-controlled land located in the Eastern Province of the Kingdom. The Eastern Province is the world`s most productive hydrocarbon resource. The Province has witnessed extraordinary industrialization over 25 years due to the exploitation of the oil resource. Saudi Aramco commissioned the planning study to set a course of action which fully considers the consequences such development may have on the social, economic and environmental characteristics of the metropolitan area. In addition to existing developed areas, the study area encompasses a unique desert environment including salts flats, native vegetation, habitat for migrating wildlife and extraordinary geologic formations overlying an important water resource. A Master Plan established a framework of land use, open space, transportation and infrastructure to guide the development of the region over the next 25 years. The Plan emphasizes the redevelopment of industrialized areas for other uses leveraging capital investment to improve quality of the built environment and establishes institutional mechanisms necessary to fully achieve implementation. The study is innovative because (1) a global energy company assumes a leadership role in stewarding its land resource, (2) incorporates contemporary land use planning techniques within a context where such planning is absent, (3) emphasizes redevelopment of industrialized areas, where historically development has simply been directed to the next available undeveloped site, and (4) applies the principles of sustainable land use planning by responding to cultural influences, strengthening local economies and preserving important natural assets. The study establishes a precendent for {open_quotes}corporate environmentalism{close_quotes}and offers a model approach to land use planning in the developing world.

  10. Waste treatment and metal recovery at the Robbins Company

    SciTech Connect (OSTI)

    Clark, P.

    1990-05-01T23:59:59.000Z

    The Robbins Company, of Attleboro, Massachusetts, a medium-sized jewelry manufacturing and plating company, installed a new wastewater treatment and metal recovery system, which forms a closed-loop, completed in February, 1988. The company now generates very small quantities of hazardous wastes non-contact cooling water from the annealing furnaces, and intends to complete it`s water conservation program by installing one or more chillers on the furnaces. Since 1986, chemical usage has dropped 81.8%, hazardous waste generation 89% and water usage by 47.7%, generating an annual savings of over $71,000.

  11. Tampa Electric Company`s Polk Power Station Integrated Gasification Combined Cycle Project

    SciTech Connect (OSTI)

    Jenkins, S.D.; Shafer, J.R.

    1994-12-31T23:59:59.000Z

    Tampa Electric Company (TEC) is in the construction phase for the new Polk Power Station, Unit {number_sign}1. This will be the first unit at a new site and will use Integrated Gasification Combined Cycle (IGCC) technology for power generation. The unit will utilize oxygen-blown entrained-flow coal gasification, along with combined cycle technology, to provide nominal net 26OMW of generation. As part of the environmental features of this process, the sulfur species in the coal will be recovered as a commercial grade sulfuric acid by-product. The sulfur will be removed from the synthesis gas utilizing a cold gas clean-up system (CGCU).

  12. Broadening the Statistical Search for Metal Price Super Cycles to Steel and Related Metals

    E-Print Network [OSTI]

    Broadening the Statistical Search for Metal Price Super Cycles to Steel and Related Metals of industrial development and urbanization: steel, pig iron, and molybdenum (a key ingredient in many steel's (2008) econometric search for super cycles in metals prices to our `steel group', defined here as steel

  13. U.S. Energy Service Company Industry: Market Size and Project Performance from 1990-2008

    E-Print Network [OSTI]

    Larsen, Peter

    2014-01-01T23:59:59.000Z

    of the U.S. Energy Service Company Industry: Market Size andTitle: U.S. Energy Service Company Industry: Market Size and

  14. Incidence of Negative Appendectomy: Experience From a Company Hospital in Nigeria

    E-Print Network [OSTI]

    Osime, O C; Ajayi, P A

    2005-01-01T23:59:59.000Z

    From a Company Hospital in Nigeria OC Osime, FMCS, FICSHospital Benin City, Nigeria ABSTRACT Objective: The aim ofin a company hospital in Nigeria. Background: Appendicitis

  15. Interim activities report. [Westinghouse Savannah River Company

    SciTech Connect (OSTI)

    Majzlik, E.H. Jr.

    1992-01-01T23:59:59.000Z

    Several developments have occurred since the 32nd WANTO Meeting that effect the status of the Savannah River Site. A request to restart K-Reactor was issued after nearly three years of intensive engineering analysis, procedure revisions and enhanced operator training to upgrade all aspects of reactor operation. In early December 1991, the Westinghouse Savannah River Company requested permission from DOE to start the K-Reactor. In mid-December the DOE and the Defense Nuclear Facility Safety Board concurred with readiness to operate and a Federal Circuit Court of Appeals ruled against a lawsuit to delay restart until a cooling tower is completed. The K-Reactor was restarted and has been in an evaluation and testing mode. Full power operation at thirty percent of maximum capacity is projected for March 1992 after which actual tritium generation will begin. Operation will continue until October when the cooling tower will be tied into the reactor cooling system. In conjunction with the restart of K-Reactor, the P-Reactor has been placed in permanent shutdown status and the L-Reactor has been placed in warm stand-by. In another reactor related situation, the DOE will delay the decision on construction of the New Production Reactor (NPR) until 1993. The choice of reactor type and location of the NPR will be integrated into the overall programmatic decision on Reconfiguration of the Weapons Complex. Finally, construction of the Replacement Tritium Facility (RTF) was resumed in December 1991 after several months stoppage for evaluation and revision of project funding procedures.

  16. Steel Creek fish: L-Lake/Steel Creek Biological Monitoring Program, January 1986--December 1987

    SciTech Connect (OSTI)

    Paller, M.H.; Heuer, J.H.; Kissick, L.A.

    1988-03-01T23:59:59.000Z

    Fish samples were collected from Steel Creek during 1986 and 1987 following the impoundment of the headwaters of the stream to form L-Lake, a cooling reservoir for L-Reactor which began operating late in 1985. Electrofishing and ichthyoplankton sample stations were located throughout the creek. Fykenetting sample stations were located in the creek mouth and just above the Steel Creek swamp. Larval fish and fish eggs were collected with 0.5 m plankton nets. Multivariate analysis of the electrofishing data suggested that the fish assemblages in Steel Creek exhibited structural differences associated with proximity to L-Lake, and habitat gradients of current velocity, depth, and canopy cover. The Steel Creek corridor, a lotic reach beginning at the base of the L-Lake embankment was dominated by stream species and bluegill. The delta/swamp, formed where Steel Creek enters the Savannah River floodplain, was dominated by fishes characteristic of slow flowing waters and heavily vegetated habitats. The large channel draining the swamp supported many of the species found in the swamp plus riverine and anadromous forms.

  17. Steel Creek fish, L-Lake/Steel Creek Biological Monitoring Program, January 1986--December 1991

    SciTech Connect (OSTI)

    Sayers, R.E. Jr.; Mealing, H.G. III [Normandeau Associates, Inc., New Ellenton, SC (United States)

    1992-04-01T23:59:59.000Z

    The Savannah River Site (SRS) encompasses 300 sq mi of the Atlantic Coastal plain in west-central South Carolina. The Savannah River forms the western boundary of the site. Five major tributaries of the Savannah River -- Upper Three Runs Creek, Four Mile Creek, Pen Branch, Steel Creek, and Lower Three Runs Creek -- drain the site. All but Upper Three Runs Creek receive, or in the past received, thermal effluents from nuclear production reactors. In 1985, L Lake, a 400-hectare cooling reservoir, was built on the upper reaches of Steel Creek to receive effluent from the restart of L-Reactor, and protect the lower reaches from thermal impacts. The lake has an average width of approximately 600 m and extends along the Steel Creek valley approximately 7000 m from the dam to the headwaters. Water level is maintained at a normal pool elevation of 58 m above mean sea level by overflow into a vertical intake tower that has multilevel discharge gates. The intake tower is connected to a horizontal conduit that passes through the dam and releases water into Steel Creek. The Steel Creek Biological Monitoring Program was designed to meet environmental regulatory requirements associated with the restart of L-Reactor and complements the Biological Monitoring Program for L Lake. This extensive program was implemented to address portions of Section 316(a) of the Clean Water Act. The Department of Energy (DOE) must demonstrate that the operation of L-Reactor will not significantly alter the established aquatic ecosystems.

  18. Microstructure/property relationships in dissimilar welds between duplex stainless steels and carbon steels

    SciTech Connect (OSTI)

    Barnhouse, E.J. [Weirton Steel Corp., WV (United States); Lippold, J.C. [Ohio State Univ., Columbus, OH (United States)

    1998-12-01T23:59:59.000Z

    The metallurgical characteristics, toughness and corrosion resistance of dissimilar welds between duplex stainless steel Alloy 2205 and carbon steel A36 have been evaluated. Both duplex stainless steel ER2209 and Ni-based Alloy 625 filler metals were used to join this combination using a multipass, gas tungsten arc welding (GTAW) process. Defect-free welds were made with each filler metal. The toughness of both the 625 and 2209 deposits were acceptable, regardless of heat input. A narrow martensitic region with high hardness was observed along the A36/2209 fusion boundary. A similar region was not observed in welds made with the 625 filler metal. The corrosion resistance of the welds made with 2209 filler metal improved with increasing heat input, probably due to higher levels of austenite and reduced chromium nitride precipitation. Welds made with 625 exhibited severe attack in the root pass, while the bulk of the weld was resistant. This investigation has shown that both filler metals can be used to joint carbon steel to duplex stainless steels, but that special precautions may be necessary in corrosive environments.

  19. Phase Transformation in Cast Superaustenitic Stainless Steels

    SciTech Connect (OSTI)

    Nathaniel Steven Lee Phillips

    2006-12-12T23:59:59.000Z

    Superaustenitic stainless steels constitute a group of Fe-based alloys that are compositionally balanced to have a purely austenitic matrix and exhibit favorable pitting and crevice corrosion resistant properties and mechanical strength. However, intermetallic precipitates such as sigma and Laves can form during casting or exposure to high-temperature processing, which degrade the corrosion and mechanical properties of the material. The goal of this study was to accurately characterize the solid-solid phase transformations seen in cast superaustenitic stainless steels. Heat treatments were performed to understand the time and temperature ranges for intermetallic phase formations in alloys CN3MN and CK3MCuN. Microstructures were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy and wavelength dispersive spectroscopy (EDS, WDS). The equilibrium microstructures, composed primarily of sigma and Laves within purely austenitic matrices, showed slow transformation kinetics. Factors that determine the extent of transformation, including diffusion, nucleation, and growth, are discussed.

  20. Metallurgical evaluation of recycled stainless steel

    SciTech Connect (OSTI)

    Imrich, K.J.

    1997-01-22T23:59:59.000Z

    Recycled Type 304 stainless steel from both Carolina Metals Inc. (CMI) and Manufacturing Science Corporation (MSC) met all the requirements of ASTM A-240 required by Procurement Specification G-SPP-K-00005 Rev. 4. Mechanical strength and corrosion resistance of the material are adequate for service as burial boxes, overpacks, and drums. Inclusion content of both manufacturer`s material was high, resulting in a corresponding decrease in the corrosion resistance. Therefore, an evaluation of the service conditions should be performed before this material is approved for other applications. These heats of stainless steel are not suitable for fabricating DWPF glass canisters because the inclusion and carbon contents are high. However, MSC has recently installed a vacuum induction furnace capable of producing L grade material with a low inclusion content. Material produced from this furnace should be suitable for canister material if appropriate care is taken during the melting/casting process.

  1. Modelling Precipitation of Carbides in Martensitic Steels

    E-Print Network [OSTI]

    Yamasaki, Shingo

    is greater than the yield stress of many commercial steels. II Sulfide stress corrosion cracking (SSCC) There were cases in which joints of pipes used in oil wells ruptured only a few days after the commencement of operation [45, 46]. These accidents were... -composition IG Intergranular fracture MVC Microvoid coalescence rupture MTDATA Metallurgical and Thermochemical Databank PC Pre-stressed concrete QC Quasi-cleavage fracture SSCC Sulfide stress corrosion cracking TEM Transmission electron microscope TMCP...

  2. Strategy Guideline: Transitioning HVAC Companies to Whole House Performance Contractors

    SciTech Connect (OSTI)

    Burdick, A.

    2012-05-01T23:59:59.000Z

    This report describes the findings from research IBACOS conducted related to heating, ventilation, and air conditioning (HVAC) companies who have made the decision to transition to whole house performance contracting (WHPC).

  3. VEE-0021- In the Matter of Jacobs Oil Company

    Broader source: Energy.gov [DOE]

    On August 16, 1996 Jacobs Oil Company (Jacobs) of Dysart, Pennsylvania filed an Application for Exception with the Office of Hearings and Appeals (OHA) of the Department of Energy (DOE). In its...

  4. LEE-0152- In the Matter of Sound Oil Company

    Broader source: Energy.gov [DOE]

    On August 16, 1994, Sound Oil Company (Sound) of Seattle Washington, filed an Application for Exception with the Office of Hearings and Appeals of the Department of Energy. In its Application,...

  5. VEE-0039- In the Matter of Froman Oil Company

    Broader source: Energy.gov [DOE]

    On February 11, 1997, Froman Oil Company (Froman) filed an Application for Exception with the Office of Hearings and Appeals of the Department of Energy. In its Application, Froman requests that it...

  6. VEE-0035- In the Matter of Rice Oil Company, Inc.

    Broader source: Energy.gov [DOE]

    On October 22, 1996, Rice Oil Company, Inc. (Rice) of Greenfield, Massachusetts filed an Application for Exception with the Office of Hearings and Appeals (OHA) of the Department of Energy (DOE)....

  7. VEE-0064- In the Matter of Belcourt Oil Company

    Broader source: Energy.gov [DOE]

    On July 23, 1999, Belcourt Oil Company (Belcourt) of Belcourt, North Dakota filed an Application for Exception with the Office of Hearings and Appeals (OHA) of the Department of Energy (DOE). In...

  8. VEE-0030- In the Matter of Lee Oil Company

    Broader source: Energy.gov [DOE]

    On July 19, 1996, Lee Oil Company (Lee), located in Greensboro, North Carolina, filed an Application for Exception with the Office of Hearings and Appeals (OHA) of the Department of Energy. In its...

  9. VEE-0028- In the Matter of Laney Oil Company, Inc.

    Broader source: Energy.gov [DOE]

    On June 18, 1996, the Laney Oil Company, Inc., (Laney Oil) of Monroe, North Carolina, filed an Application for Exception with the Office of Hearings and Appeals of the Department of Energy. In its...

  10. Microsoft Word - PSEG Companies Comments in OE Docket No RRTT...

    Broader source: Energy.gov (indexed) [DOE]

    In addition, PSE&G shares a critical interface with New York City. PSEG Power is a wholesale energy supply company that integrates its generation asset operations with its...

  11. Minnesota Company 3M Awarded $3 Million by Energy Department...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of 3 million to 3M Company in St. Paul, Minnesota, to lower the cost of advanced fuel cell systems by developing cost-effective, durable, and highly efficient fuel cell...

  12. Fast Company covers "Just Your Typical New Mexico Image Recognition...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Not) just your typical Lab spin off Fast Company covers "Just Your Typical New Mexico Image Recognition Startup Spun Off From A Government Lab" Far from Silicon Valley, Descartes...

  13. VEE-0076- In the Matter of Green Mountain Energy Company

    Broader source: Energy.gov [DOE]

    On August 23, 2000, the Green Mountain Energy Company (Green Mountain) of Austin, Texas, filed an Application for Exception with the Office of Hearings and Appeals of the Department of Energy (DOE)...

  14. Inventory management in a pharmaceutical company : minimizing discard practices

    E-Print Network [OSTI]

    Wang, Xiaojun, M. Eng. Massachusetts Institute of Technology

    2010-01-01T23:59:59.000Z

    Pharmaceutical company SPM has over 400 cases of inventory discards over the past five years which constitute a significant operating cost. Due to the complexity and randomness of each case, the root causes that result in ...

  15. Kentucky Utilities Company- Commercial Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    Kentucky Utilities Company (KU) offers rebates to all commercial customers who pay a DSM charge on monthly bills. Rebates are available on lighting measures, sensors, air conditioners, heat pumps,...

  16. Engineering & Science Careers Fair Booth Company Recruiting in

    E-Print Network [OSTI]

    Hickman, Mark

    Sciences, Geography, Geology, Statistics 24 Northrop Consulting Engineers Civil, Electrical and Electronic and Electronic, Mechanical 40 ITL Engineering Chemical and Process, Electrical and Electronic, MechanicalEngineering & Science Careers Fair Booth Company Recruiting in 1 Abley Transportation Consultants

  17. Intermountain Gas Company (IGC)- Gas Heating Rebate Program

    Broader source: Energy.gov [DOE]

    The Intermountain Gas Company's (IGC) Gas Heating Rebate Program offers customers a $200 per unit rebate when they convert to a high efficiency natural gas furnace that replaces a heating system...

  18. Utilizing Industrial Engineers to Implement "Lean Enterprise" at Company A

    E-Print Network [OSTI]

    Stein, Jean D'Ann

    2012-12-14T23:59:59.000Z

    in the implementation of continuous improvement and lean thinking. This skillset has recently allowed IEs to work outside their normal realm of manufacturing, and focus on areas more closely related to service organizations. At Company A, Industrial Engineers...

  19. Do Small Companies Care About Energy Savings?: A Case Study 

    E-Print Network [OSTI]

    Agrawal, S.; Jensen, R.

    1998-01-01T23:59:59.000Z

    DO SMALL COMPANIES CARE ABOUT ENERGY SAVINGS?: A CASE STUDY Sanjay Agrawal Assistant Director Richard Jensen Director Industrial Assessment Center Department of Engineering Hofstra University, Hempstead, NY 11549 ABSTRACT Often times small...

  20. Patent Litigation for High Technology and Life Sciences Companies

    E-Print Network [OSTI]

    Shamos, Michael I.

    Patent Litigation for High Technology and Life Sciences Companies #12;© 2005 Fenwick & West LLP Corporate (emerging growth, financings, securities, mergers & acquisitions) n Intellectual Property (patent, copyright, licensing, trademark) n Litigation (patent and other IP, securities, antitrust, employment

  1. VES-0071- In the Matter of Mississippi Power Company

    Broader source: Energy.gov [DOE]

    On May 1, 2000, the Mississippi Power Company, of Gulfport, Mississippi (Mississippi Power), filed with the Office of Hearings and Appeals (OHA) of the Department of Energy an Application for...

  2. Interactive Energy Management Tool (IEMT) for Arkansas Companies

    E-Print Network [OSTI]

    Pidugu, S. B.; Menhart, S.; Midturi, S.

    2005-01-01T23:59:59.000Z

    To benefit small and medium industries located in Arkansas, the Engineering Technology Department at the University of Arkansas at Little Rock (UALR) is currently developing an Interactive Energy Management Tool (IEMT) for Arkansas Companies...

  3. VEE-0032- In the Matter of Thomas Oil Company

    Broader source: Energy.gov [DOE]

    On September 13, 1996, Thomas Oil Company (Thomas Oil) filed an Application for Exception with the Office of Hearings and Appeals (OHA) of the Department of Energy (DOE). In its application, Thomas...

  4. Metropolitan Edison Company SEF Loans (FirstEnergy Territory)

    Broader source: Energy.gov [DOE]

    FirstEnergy (formerly GPU) established the Metropolitan Edison Company Sustainable Energy Fund in 2000 with an initial contribution of $5.7 million. The fund later received an additional...

  5. AEP Texas Central Company- SMART Source Solar PV Rebate Program

    Broader source: Energy.gov [DOE]

    American Electric Power Texas Central Company (AEP-TCC) offers rebates to customers that install photovoltaic (PV) systems on homes or other buildings. Customers of all rate classes are eligible to...

  6. AEP Texas North Company- SMART Source Solar PV Rebate Program

    Broader source: Energy.gov [DOE]

    American Electric Power Texas North Company (AEP-TNC) offers rebates to customers that install photovoltaic (PV) systems on homes or other buildings. Customers of all rate classes (e.g.,...

  7. A classification of carbon footprint methods used by companies

    E-Print Network [OSTI]

    Andrews, Suzanne L. D. (Suzanne Lois Denise)

    2009-01-01T23:59:59.000Z

    The percent increase in greenhouse gas (GHG) concentration in the atmosphere can be harmful to the environment. There is no single preferred method for measuring GHG output. How can a company classify and choose an appropriate ...

  8. atomic power company: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CiteSeer Summary: INTRODUCTION BlackLight Power, Inc. (the Company), a Delaware corporation based in its 53,000 sq. ft. headquarters in Cranbury, New Jersey, believes it has...

  9. VEE-0043- In the Matter of Greenville Automatic Gas Company

    Broader source: Energy.gov [DOE]

    On March 11, 1997, Greenville Automatic Gas Company (Greenville) filed an Application for Exception with the Office of Hearings and Appeals (OHA) of the Department of Energy (DOE). In its...

  10. Internship in Toulouse FRANCE / Girona SPAIN / Nottingham UK The Company

    E-Print Network [OSTI]

    Rostock, Universität

    Internship in Toulouse FRANCE / Girona SPAIN / Nottingham UK The Company Stipje is an organisation. We have offices in the United Kingdom, France and Spain and have students working with us from almost

  11. VBR-0002- In the Matter of Westinghouse Savannah River Company

    Broader source: Energy.gov [DOE]

    This supplemental order concerns a Motion for Reconsideration (Case No. VBR-0002) filed by Westinghouse Savannah River Company (WSRC) on November 12, 1999. The reconsideration motion relates to an...

  12. LWZ-0031- In the Matter of Westinghouse Hanford Company

    Broader source: Energy.gov [DOE]

    This determination will consider a Motion to Dismiss filed by Westinghouse Hanford Company (WHC) on April 5, 1994. In its Motion, WHC seeks the dismissal of the underlying complaint and hearing...

  13. Otter Tail Power Company- Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    Otter Tail Power Company offers incentives to all of its customers to install energy efficient equipment in their homes or facilities. Rebates are available for high-efficiency electric heating...

  14. Otter Tail Power Company- Residential Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    Otter Tail Power Company offers incentives to all residential customers in South Dakota to install energy efficient equipment in residences. Rebates are available for geothermal and air source heat...

  15. Otter Tail Power Company- Commercial Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    Otter Tail Power Company offers incentives to all of its commercial customers in South Dakota to install energy efficient equipment in eligible facilities. Rebates are available for geothermal and...

  16. Otter Tail Power Company- Residential Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    Otter Tail Power Company Rebate Program offers rebates to qualifying residential customers for the installation of high-efficiency equipment upgrades. See the program web site for applicability and...

  17. VEE-0066- In the Matter of Taylor Oil Company

    Broader source: Energy.gov [DOE]

    On July 30, 1999, Taylor Oil Company (Taylor) of Somerville, New Jersey filed an Application for Exception with the Office of Hearings and Appeals (OHA) of the Department of Energy (DOE). In its...

  18. Otter Tail Power Company- Dollar Smart Financing Program

    Broader source: Energy.gov [DOE]

    Otter Tail Power Company's Dollar Smart Financing Program offers loans of $150 - $40,000 to residential and business customers. Customers who have satisfactory 12-month payment histories with Otter...

  19. Otter Tail Power Company- Dollar Smart Financing Program

    Broader source: Energy.gov [DOE]

    Otter Tail Power Company's Dollar Smart Financing Program offers $150 - $40,000 loans to its residential and business customers. Customers who have satisfactory 12-month payment histories with...

  20. Answer of Potomac Electric Power Company and PJM lnterconnection...

    Broader source: Energy.gov (indexed) [DOE]

    ("FERC" or "Commission"), 18 C.F.R. 385.213, Potomac Electric Power Company ("Pepco") and PJM Interconnection, L.L.C. ("PJM") hereby answer the Motion of Robert G....

  1. Potomac Electric Power Company's Motion for Leave to Answer and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    18 C.F.R. 385.212 and 385.213 (2005), Potomac Electric Power Company ("Pepco") hereby (i) moves for leave to answer and (ii) answers certain of the comments and...

  2. Potomac Electric Power Company's Motion to Intervene and Comment...

    Broader source: Energy.gov (indexed) [DOE]

    18 C.F.R. 385.211 and 385.214 (2004), Potomac Electric Power Company ("Pepco") hereby moves to intervene in the above-captioned proceeding and supports the August...

  3. Cast Stainless Steel Ferrite and Grain Structure

    SciTech Connect (OSTI)

    Ruud, Clayton O.; Ramuhalli, Pradeep; Meyer, Ryan M.; Mathews, Royce; Diaz, Aaron A.; Anderson, Michael T.

    2012-09-01T23:59:59.000Z

    In-service inspection requirements dictate that piping welds in the primary pressure boundary of light-water reactors be subject to a volumetric examination based on the rules contained within the American Society of Mechanical Engineers Boiler and Pressure Vessel Code, Section XI. The purpose of the inspection is the reliable detection and accurate sizing of service-induced degradation and/or material flaws introduced during fabrication. The volumetric inspection is usually carried out using ultrasonic testing (UT) methods. However, the varied metallurgical macrostructures and microstructures of cast austenitic stainless steel piping and fittings, including statically cast stainless steel and centrifugally cast stainless steel (CCSS), introduce significant variations in the propagation and attenuation of ultrasonic energy. These variations complicate interpretation of the UT responses and may compromise the reliability of UT inspection. A review of the literature indicated that a correlation may exist between the microstructure and the delta ferrite content of the casting alloy. This paper discusses the results of a recent study where the goal was to determine if a correlation existed between measured and/or calculated ferrite content and grain structure in CCSS pipe.

  4. Integrating Steel Production with Mineral Carbon Sequestration

    SciTech Connect (OSTI)

    Klaus Lackner; Paul Doby; Tuncel Yegulalp; Samuel Krevor; Christopher Graves

    2008-05-01T23:59:59.000Z

    The objectives of the project were (i) to develop a combination iron oxide production and carbon sequestration plant that will use serpentine ores as the source of iron and the extraction tailings as the storage element for CO2 disposal, (ii) the identification of locations within the US where this process may be implemented and (iii) to create a standardized process to characterize the serpentine deposits in terms of carbon disposal capacity and iron and steel production capacity. The first objective was not accomplished. The research failed to identify a technique to accelerate direct aqueous mineral carbonation, the limiting step in the integration of steel production and carbon sequestration. Objective (ii) was accomplished. It was found that the sequestration potential of the ultramafic resource surfaces in the US and Puerto Rico is approximately 4,647 Gt of CO2 or over 500 years of current US production of CO2. Lastly, a computer model was developed to investigate the impact of various system parameters (recoveries and efficiencies and capacities of different system components) and serpentinite quality as well as incorporation of CO2 from sources outside the steel industry.

  5. Dimensional variability of production steel castings

    SciTech Connect (OSTI)

    Peters, F.E.; Risteu, J.W.; Vaupel, W.G.; DeMeter, E.C.; Voigt, R.C.

    1994-12-31T23:59:59.000Z

    Work is ongoing to characterize the dimensional variability of steel casting features. Data are being collected from castings produced at representative Steel Founders` Society of America foundries. Initial results based on more than 12,500 production casting feature measurements are presented for carbon and low alloy steel castings produced in green sand, no-bake, and shell molds. A comprehensive database of casting, pattern, and feature variables has been developed so that the influence of the variables on dimensional variability can be determined. Measurement system analysis is conducted to insure that large measurement error is not reported as dimensional variability. Results indicate that the dimensional variability of production casting features is less than indicated in current US (SFSA) and international (ISO) standards. Feature length, casting weight, parting line and molding process all strongly influence dimensional variability. Corresponding pattern measurements indicate that the actual shrinkage amount for casting features varies considerably. This variation in shrinkage will strongly influence the ability of the foundry to satisfy customer dimensional requirements.

  6. EAF steel producers and the K061 dilemma

    SciTech Connect (OSTI)

    Prichard, L.C.

    1995-12-31T23:59:59.000Z

    The scrap based steel producers in the United States generate an estimated 650,000 tons of electric arc furnace (EAF) dust annually which is classified as hazardous waste, K061. These scrap based producers commonly referred to as mini-mills represented 39% of the steel produced in 1994. Based upon the EAF plants being installed or planned today, it is a reasonable projection to anticipate 50% of the steel produced in the United States will be by EAF`S. Using a straight line projection of percent of steel produced to tonnage of EAF dust generated, this will result in 833,000 tons of dust being generated upon the completion of these new EAF producing plants, presumably by the year 2000. Because the United States is a capitalistic economy, a steel producer is in business to make a profit therefore dust management becomes a very important variable in the cost of making steel.

  7. The performance of duplex stainless steels in chemical environments

    SciTech Connect (OSTI)

    Francis, R. [Weir Materials Ltd., Manchester (United Kingdom). Park Works

    1994-12-31T23:59:59.000Z

    The process industries have used 300 series stainless steels for many years where the corrosion resistance of carbon steel is inadequate. Where stainless steels have proved inadequate there has been a tendency to utilize high nickel alloys, with a greatly increased cost. The present paper reviews the different grades of duplex stainless steel and shows how their superior corrosion and stress corrosion cracking resistance, plus their high strength, can be utilized to provide cost effective alternatives to the high nickel alloys. The use of alternative design codes to take advantages of the properties of duplex alloys is discussed. Data is presented to show the resistance of duplex stainless steels to a variety of chemical environments. The use of duplex stainless steels and the reason for their selection in a number of applications is reviewed.

  8. Vertical integration in the beef cattle industry: Harris Ranch Company

    E-Print Network [OSTI]

    Pedretti Fernandez, Carlos Luis

    1990-01-01T23:59:59.000Z

    to 350 Ib in a 6 mo period (McNeill, 1985). Ranch mana ement. The ranching operation is organized around three company-owned ranches, plus several leased pastures and ranches. Each company- owned ranch is operated by only one person. The availability... of ranches to lease, marketing necessities, and grass condition determines the usage of pastures and the placement of cattle. One ranch supervisor oversees the entire operation and coordinates the work of each of the ranch foremen. The ranch foreman...

  9. The Role of Marketing at Duke Power Company

    E-Print Network [OSTI]

    Paules, W. R. Jr.

    POLICY Because their use of computerized and solid-state equipment is increasing, our industrial customers are sensitive not only to the quantity of electricity -- but also the quality. Last year, Duke Power implemented a power system disturbance...THE ROLE OF MARKETING AT DUKE POWER COMPANY W. ROGER PAULES, JR., P. E. Industrial Marketing Specialist Duke Power Company Charlotte, North Carolina ABSTRACT This paper examines the changes that have taken place in Duke Power's marketing...

  10. Drugs offshore: companies stepping up fight against hidden adversary

    SciTech Connect (OSTI)

    Redden, J.

    1986-01-01T23:59:59.000Z

    Oil companies worldwide are effectively fighting a growing nemesis, drug and alcohol abuse on offshore installations. It is estimated that companies are losing millions of dollars in lost productivity, accidents, and thefts caused by on-the-job use of illegal drugs. Some of the measures being employed to combat the use of such drugs, e.g., tight control, better communications, diversions for employees, and the use of sniffer dogs, are discussed.

  11. Safety analysis report for packaging (onsite) steel drum

    SciTech Connect (OSTI)

    McCormick, W.A.

    1998-09-29T23:59:59.000Z

    This Safety Analysis Report for Packaging (SARP) provides the analyses and evaluations necessary to demonstrate that the steel drum packaging system meets the transportation safety requirements of HNF-PRO-154, Responsibilities and Procedures for all Hazardous Material Shipments, for an onsite packaging containing Type B quantities of solid and liquid radioactive materials. The basic component of the steel drum packaging system is the 208 L (55-gal) steel drum.

  12. Characterization of thermal aging of duplex stainless steel by SQUID

    SciTech Connect (OSTI)

    Isobe, Y.; Kamimura, A.; Aoki, K.; Nakayasu, F. [Nuclear Fuel Industries, Ltd., Osaka (Japan)

    1995-08-01T23:59:59.000Z

    Thermal aging is a growing concern for long-term-aged duplex stainless steel piping in nuclear power plants. Superconducting QUantum Interference Device (SQUID) was used for the detection of thermal aging of SUS329 rolled duplex stainless steel and SCS16 cast duplex stainless steel. It was found that the SQUID output signal pattern in the presence of AC magnetic field applied to the specimen was sensitive to the changes in electromagnetic properties due to thermal aging.

  13. Energy Saving Melting and Revert Reduction Technology (Energy-SMARRT): Clean Steel Casting Production

    SciTech Connect (OSTI)

    Kuyucak, Selcuk [CanmetMATERIALS; Li, Delin [CanmetMATERIALS

    2013-12-31T23:59:59.000Z

    Inclusions in steel castings can cause rework, scrap, poor machining, and reduced casting performance, which can obviously result in excess energy consumption. Significant progress in understanding inclusion source, formation and control has been made. Inclusions can be defined as non-metallic materials such as refractory, sand, slag, or coatings, embedded in a metallic matrix. This research project has focused on the mold filling aspects to examine the effects of pouring methods and gating designs on the steel casting cleanliness through water modeling, computer modeling, and melting/casting experiments. Early in the research project, comprehensive studies of bottom-pouring water modeling and low-alloy steel casting experiments were completed. The extent of air entrainment in bottom-poured large castings was demonstrated by water modeling. Current gating systems are designed to prevent air aspiration. However, air entrainment is equally harmful and no prevention measures are in current practice. In this study, new basin designs included a basin dam, submerged nozzle, and nozzle extension. The entrained air and inclusions from the gating system were significantly reduced using the new basin method. Near the end of the project, there has been close collaboration with Wescast Industries Inc., a company manufacturing automotive exhaust components. Both computer modeling using Magma software and melting/casting experiments on thin wall turbo-housing stainless steel castings were completed in this short period of time. Six gating designs were created, including the current gating on the pattern, non-pressurized, partially pressurized, naturally pressurized, naturally pressurized without filter, and radial choke gating without filter, for Magma modeling. The melt filling velocity and temperature were determined from the modeling. Based on the simulation results, three gating designs were chosen for further melting and casting experiments on the same casting pattern using the lip pouring method. It was observed again that gating designs greatly influenced the melt filling velocity and the number of inclusion defects. The radial choked gating showed improvements in casting cleanliness and yield over the other gatings, even though no mold filters were used in the gating system.

  14. automotive sheet steels: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and 90, elongated Paris-Sud XI, Universit de 88 Spot weldability of TRIP assisted steels with high carbon and aluminium contents Materials Science Websites Summary:...

  15. ITP Steel: Hydrogen and Nitrogen Control in Ladle and Casting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydrogen and Nitrogen Control in Ladle and Casting Operations ITP Steel: Hydrogen and Nitrogen Control in Ladle and Casting Operations castingops.pdf More Documents & Publications...

  16. Climate VISION: Private Sector Initiatives: Iron and Steel: GHG...

    Office of Scientific and Technical Information (OSTI)

    chemicals, forest products (such as paper and wood products), glass, metal casting, petroleum and coal products, and steel. As soon as the current briefs are available, we...

  17. analog stainless steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (more) Naraghi, Reza 2009-01-01 2 Quantification of phase transformation in stainless steel 301LN sheets MIT - DSpace Summary: This thesis investigates the large deformation...

  18. arc stainless steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (more) Naraghi, Reza 2009-01-01 2 Quantification of phase transformation in stainless steel 301LN sheets MIT - DSpace Summary: This thesis investigates the large deformation...

  19. Friction Stir Spot Welding of Advanced High Strength Steels ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    does not contain any proprietary or confidential information Friction Stir Spot Welding of Advanced High Strength Steels (AHSS) (13056 ORNL, 13055 PNNL) Friction Stir Spot...

  20. Production design for plate products in the steel industry

    E-Print Network [OSTI]

    Sanjeeb Dash

    2007-04-05T23:59:59.000Z

    Apr 5, 2007 ... Abstract: We describe an optimization tool for a multistage production process for rectangular steel plates. The problem we solve yields a ...

  1. activation martensitic steels: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    modeling and experimental study of brittle fracture in tempered martensitic steels for thermonuclear fusion applications. Open Access Theses and Dissertations Summary: ??In this...

  2. activation martensitic steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    modeling and experimental study of brittle fracture in tempered martensitic steels for thermonuclear fusion applications. Open Access Theses and Dissertations Summary: ??In this...

  3. New Austenitic Stainless Steels for Exhaust Components (Agreement...

    Energy Savers [EERE]

    Documents & Publications CF8C PLus: A New Cast Stainless Steel for High-Temperature Diesel Exhaust Components Vehicle Technologies Office Merit Review 2014: Materials for...

  4. Blast damage mitigation of steel structures from near- contact charges

    E-Print Network [OSTI]

    Wolfson, Janet Crumrine

    2008-01-01T23:59:59.000Z

    OF CALIFORNIA, SAN DIEGO Blast Damage Mitigation of Steel35  Damage Levels Observed in LaboratoryFigure 3.34: Progression of damage for a Ballistic Loading

  5. a537 carbon steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    T300: C strength 4340 steel, carbon-carbon composite, and Carbon-Silicon Carbide composite were tested to examine materials. MATERIALS AND DESIRED DATA Carbon-Carbon...

  6. Strain Rate Characterization of Advanced High Strength Steels

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    design factor - New materials do not have design history available for conventional automotive materials (e.g. mild steel) - This lack of knowledge is compensated by...

  7. Auto/Steel Partnership: Fatigue of AHSS Strain Rate Characterization...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fatigue of AHSS Strain Rate Characterization AutoSteel Partnership: Fatigue of AHSS Strain Rate Characterization 2009 DOE Hydrogen Program and Vehicle Technologies Program Annual...

  8. alloyed stainless steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Paris-Sud XI, Universit de 3 Standard test methods for pitting and crevice corrosion resistance of stainless steels and related alloys by use of ferric Chloride solution...

  9. alloy steels etudes: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    y-dend rites. (Note: primary y Cambridge, University of 2 Estimation of Atmospheric Corrosion of High-Strength, Low-Alloy Steels Engineering Websites Summary: Estimation of...

  10. alloy coated steels: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    y-dend rites. (Note: primary y Cambridge, University of 2 Estimation of Atmospheric Corrosion of High-Strength, Low-Alloy Steels Engineering Websites Summary: Estimation of...

  11. alloy steel transition: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    y-dend rites. (Note: primary y Cambridge, University of 2 Estimation of Atmospheric Corrosion of High-Strength, Low-Alloy Steels Engineering Websites Summary: Estimation of...

  12. alloy coated steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    y-dend rites. (Note: primary y Cambridge, University of 2 Estimation of Atmospheric Corrosion of High-Strength, Low-Alloy Steels Engineering Websites Summary: Estimation of...

  13. alloys stainless steel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Paris-Sud XI, Universit de 3 Standard test methods for pitting and crevice corrosion resistance of stainless steels and related alloys by use of ferric Chloride solution...

  14. ITP Steel: Energy and Environmental Profile fo the U.S. Iron...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy and Environmental Profile fo the U.S. Iron and Steel Industry ITP Steel: Energy and Environmental Profile fo the U.S. Iron and Steel Industry steelprofile.pdf More...

  15. CARBON ATOM DISTRIBUTION IN A DUAL PHASE STEEL: AN ATOM PROBE STUDY

    E-Print Network [OSTI]

    Barnard, S.J.

    2014-01-01T23:59:59.000Z

    ATOM DISTRIBUTION IN A DUAL PHASE STEEL: AN ATOM PROBE STUDY~4720 1 U.S.A. IntroductioE. Dual Phase steels are currentlymartensite-austenite dual phase steel, although the results

  16. MICROSTRUCTURE AND MECHANICAL PROPERTIES OF 0.1C STEEL WITH Nb

    E-Print Network [OSTI]

    Gau, Jing-Sheng

    2014-01-01T23:59:59.000Z

    and Properties of Dual-Phase Steels, R. A. Kot and J. W.and Prooerties of Dual-Phase Steels, R. A. Kot and J. W.Prooerties of Vanadium Dual Phase Steel and Cold Pressing

  17. DESIGN OF DUAL PHASE Fe/Mn/C STEEL FOR LOW TEMPERATURE APPLICATION

    E-Print Network [OSTI]

    Kim, Nack-Joon

    2013-01-01T23:59:59.000Z

    and Properties of Dual- Phase Steels, R. A. Kot and J. \\4.and Properties of Dual Phase Steels, R. A. Kot and J. W. ~Formable HSLA and Dual- Phase Steels, A. T. Davenport, ed. ,

  18. A MOSSBAUER STUDY OF AUSTENITE STABILITY AND IMPACT FRACTURE IN Fe - 6 Ni STEEL

    E-Print Network [OSTI]

    Fultz, Brent

    2011-01-01T23:59:59.000Z

    IMPACT FRACTURE IN Fe-6Ni STEEL Brent Thomas Fultz Materialscommercial cryogenic alloy steel was studied with regard toThe Experiments Fe-6Ni-lMn steel plate was received from the

  19. THE EFFECT OF SILICON ON THE ENVIRONMENTAL CRACKING BEHAVIOR OF A HIGH STRENGTH STEEL

    E-Print Network [OSTI]

    Cedeno, M.H.C.

    2010-01-01T23:59:59.000Z

    Low-Alloy, High-Strength Steel, Advanced Research ProjectsTests of High Strength Steels, BISRA Report September 1971.Cracking in High Strength Steels and in Titanium and

  20. WELDABILITY OF GRAIN-REFINED Fe-12Ni-0.25Ti STEEL FOR CRYOGENIC APPLICATIONS

    E-Print Network [OSTI]

    Morris Jr., J.W.

    2013-01-01T23:59:59.000Z

    of the Cryogenic Nickel Steels, WRC Bull, 205, May, 1975.REFINED Fe-12Ni-0.25Ti STEEL FOR CRYOGENIC APPLICATIONS D.E.REFINED Fe-12Ni-0.25Ti STEEL FOR CRYOGENIC APPLICATIONS D.

  1. Effect of polyurea on dynamic response and fracture resistance of steel plates under impulsive loads

    E-Print Network [OSTI]

    Amini, Mahmoud Reza

    2007-01-01T23:59:59.000Z

    on the dynamic response of steel plates, 2006 SEM AnnualPenetration protection of steel plates with polyurea layer,the post-failure motion of steel plates subjected to blast

  2. Propagating Waves Recorded in the Steel, Moment-Frame Factor Building During Earthquakes

    E-Print Network [OSTI]

    Kohler, Monica; Heaton, Thomas H.; Samuel C. Bradford

    2007-01-01T23:59:59.000Z

    studies of damage to tall steel moment-frame buildings inan instrumented 15-story steel- frame building, EarthquakePropagating Waves in the Steel, Moment-Frame Factor Building

  3. DESIGN OF DUAL PHASE Fe/Mn/C STEEL FOR LOW TEMPERATURE APPLICATION

    E-Print Network [OSTI]

    Kim, Nack-Joon

    2013-01-01T23:59:59.000Z

    and Properties of Dual- Phase Steels, R. A. Kot and J. \\4.Properties of Dual Phase Steels, R. A. Kot and J. W. ~lorrisand Hardenability in Steels, Symp. ASt~. ~. Garvey, Trans.

  4. Identification, Model Updating, and Response Prediction of an Instrumented 15-Story Steel-Frame Building

    E-Print Network [OSTI]

    Skolnik, Derek; Lei, Ying; Yu, Eunjong; Wallace, J W

    2006-01-01T23:59:59.000Z

    A. , 1998. Ductile Design of Steel Structure, McGraw Hill,monitoring of the steel-frame UCLA Factor Building,an Instrumented 15-Story Steel-Frame Building Derek Skolnik,

  5. MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AISI 4340 STEEL MODIFIED WITH ALUMINUM AND SILICON

    E-Print Network [OSTI]

    Bhat, M.S.

    2010-01-01T23:59:59.000Z

    1968), G, Thomas. Iron and Steel Int, 46. 451 (1973), G,Containing High-Strength Steels, Cobalt Monograph Series, A.Strength Structural j Steels," ASTM Spec, Tech, PubL 498,

  6. Performance-Based Seismic Demand Assessment of Concentrically Braced Steel Frame Buildings

    E-Print Network [OSTI]

    Chen, Chui-Hsin

    2010-01-01T23:59:59.000Z

    and Ductility Factors for Steel Frames De- signed According1980), Inelastic Buckling of Steel Struts Under Cyclic LoadBS 5950: Structural use of steel work in building. Part1

  7. Post-Acquisition Integration: The Cultural Side of the Ferguson Paper Company, Inc. Acquisition of Seastrand Oil Company, Inc.

    E-Print Network [OSTI]

    Beadleston, Scott K.

    2008-12-19T23:59:59.000Z

    Paper Company, Inc.’s post-acquisition integration efficiency and effectiveness. Research indicated employees’ expectations (e.g., level of integration and synergy level) are difficult to gauge. Employees and integration leaders agreed on the most...

  8. THE USE OF MICROSTRUCTURE CONTROL TO TOUGHEN FERRITIC STEELS FOR CRYOGENIC USE. II. Fe-Mn STEELS

    E-Print Network [OSTI]

    Hwang, S.K.

    2010-01-01T23:59:59.000Z

    steels in current use at LNG temperatures and below containtemperature to below LNG temperature. The resulting alloysis suitable for use to below LNG temperature in the grain-

  9. U.S. Energy Service Company Industry: Market Size and Project Performance from 1990-2008

    E-Print Network [OSTI]

    Larsen, Peter

    2014-01-01T23:59:59.000Z

    verification ESCO energy service company ESPC energy savingstrends in the ESCO industry, administrators of ESPC programs

  10. The Use of Standard Forms by a Small to Mid-Size Consulting Company

    E-Print Network [OSTI]

    Cotter, Erik

    2009-05-15T23:59:59.000Z

    ..…………………………………………………………………………………………….9 Consulting Company A Interviews…………..………………………………………………………………………..….16 Consulting Company A Case Studies…..…………………………………………………..………………………………19 Case Study 1: City A Agreement……………….………………….………………………………………………20 Case Study 2: Company B AGC... are recommended by major engineering companies and public works associations (AWWA Construction Contract Administration). In September 2007 a set of documents called “ConsensusDOCS” were published with the intention of replacing EJCDC and AIA as the defining...

  11. Feasibility analysis of recycling radioactive scrap steel

    SciTech Connect (OSTI)

    Nichols, F. [Manufacturing Sciences Corp., Woodland, WA (United States); Balhiser, B. [MSE, Inc., Butte, MT (United States); Cignetti, N. [Cignetti Associates, North Canton, OH (United States)] [and others

    1995-09-01T23:59:59.000Z

    The purpose of this study is to: (1) establish a conceptual design that integrates commercial steel mill technology with radioactive scrap metal (RSM) processing to produce carbon and stainless steel sheet and plate at a grade suitable for fabricating into radioactive waste containers; (2) determine the economic feasibility of building a micro-mill in the Western US to process 30,000 tons of RSM per year from both DOE and the nuclear utilities; and (3) provide recommendations for implementation. For purposes of defining the project, it is divided into phases: economic feasibility and conceptual design; preliminary design; detail design; construction; and operation. This study comprises the bulk of Phase 1. It is divided into four sections. Section 1 provides the reader with a complete overview extracting pertinent data, recommendations and conclusions from the remainder of the report. Section 2 defines the variables that impact the design requirements. These data form the baseline to create a preliminary conceptual design that is technically sound, economically viable, and capitalizes on economies of scale. Priorities governing the design activities are: (1) minimizing worker exposure to radionuclide hazards, (2) maximizing worker safety, (3) minimizing environmental contamination, (4) minimizing secondary wastes, and (5) establishing engineering controls to insure that the plant will be granted a license in the state selected for operation. Section 3 provides details of the preliminary conceptual design that was selected. The cost of project construction is estimated and the personnel needed to support the steel-making operation and radiological and environmental control are identified. Section 4 identifies the operational costs and supports the economic feasibility analysis. A detailed discussion of the resulting conclusions and recommendations is included in this section.

  12. Concrete Company Aims Higher for More Wind Energy

    Broader source: Energy.gov [DOE]

    Today, most steel towers that support utility-scale turbines stand about 80 meters tall, but the Tindall Corporation wants to go higher using precast concrete to raise turbines over 100 meters in height to capture stronger, steadier winds - and more energy.

  13. SOLID STATE JOINING OF MAGNESIUM TO STEEL

    SciTech Connect (OSTI)

    Jana, Saumyadeep; Hovanski, Yuri; Pilli, Siva Prasad; Field, David P.; Yu, Hao; Pan, Tsung-Yu; Santella, M. L.

    2012-06-04T23:59:59.000Z

    Friction stir welding and ultrasonic welding techniques were applied to join automotive magnesium alloys to steel sheet. The effect of tooling and process parameters on the post-weld microstructure, texture and mechanical properties was investigated. Static and dynamic loading were utilized to investigate the joint strength of both cast and wrought magnesium alloys including their susceptibility and degradation under corrosive media. The conditions required to produce joint strengths in excess of 75% of the base metal strength were determined, and the effects of surface coatings, tooling and weld parameters on weld properties are presented.

  14. Method for machining steel with diamond tools

    DOE Patents [OSTI]

    Casstevens, J.M.

    1984-01-01T23:59:59.000Z

    The present invention is directed to a method for machine optical quality finishes and contour accuracies of workpieces of carbon-containing metals such as steel with diamond tooling. The wear rate of the diamond tooling is significantly reduced by saturating the atmosphere at the interface of the workpiece and the diamond tool with a gaseous hydrocarbon during the machining operation. The presence of the gaseous hydrocarbon effectively eliminates the deterioration of the diamond tool by inhibiting or preventing the conversion of the diamond carbon to graphite carbon at the point of contact between the cutting tool and the workpiece.

  15. Method for machining steel with diamond tools

    DOE Patents [OSTI]

    Casstevens, John M. (Greenville, TX)

    1986-01-01T23:59:59.000Z

    The present invention is directed to a method for machining optical quality inishes and contour accuracies of workpieces of carbon-containing metals such as steel with diamond tooling. The wear rate of the diamond tooling is significantly reduced by saturating the atmosphere at the interface of the workpiece and the diamond tool with a gaseous hydrocarbon during the machining operation. The presence of the gaseous hydrocarbon effectively eliminates the deterioration of the diamond tool by inhibiting or preventing the conversion of the diamond carbon to graphite carbon at the point of contact between the cutting tool and the workpiece.

  16. Heavy-Section Steel Irradiation Program

    SciTech Connect (OSTI)

    Rosseel, T.M.

    2000-04-01T23:59:59.000Z

    Maintaining the integrity of the reactor pressure vessel (RPV) in a light-water-cooled nuclear power plant is crucial in preventing and controlling severe accidents that have the potential for major contamination release. Because the RPV is the only key safety-related component of the plant for which a redundant backup system does not exist, it is imperative to fully understand the degree of irradiation-induced degradation of the RPV's fracture resistance that occurs during service. For this reason, the Heavy-Section Steel Irradiation (HSSI) Program has been established.

  17. Gas Atomization of Stainless Steel - Slow Motion

    SciTech Connect (OSTI)

    None

    2011-01-01T23:59:59.000Z

    Stainless steel liquid atomized by supersonic argon gas into a spray of droplets at ~1800ºC. Atomization of metal requires high pressure gas and specialized chambers for cooling and collecting the powders without contamination. The critical step for morphological control is the impingement of the gas on the melt stream. The video is a black and white high speed video of a liquid metal stream being atomized by high pressure gas. This material was atomized at the Ames Laboratory's Materials Preparation Center http://www.mpc.ameslab.gov

  18. Automated inspection of hot steel slabs

    DOE Patents [OSTI]

    Martin, Ronald J. (Burnsville, MN)

    1985-01-01T23:59:59.000Z

    The disclosure relates to a real time digital image enhancement system for performing the image enhancement segmentation processing required for a real time automated system for detecting and classifying surface imperfections in hot steel slabs. The system provides for simultaneous execution of edge detection processing and intensity threshold processing in parallel on the same image data produced by a sensor device such as a scanning camera. The results of each process are utilized to validate the results of the other process and a resulting image is generated that contains only corresponding segmentation that is produced by both processes.

  19. Automated inspection of hot steel slabs

    DOE Patents [OSTI]

    Martin, R.J.

    1985-12-24T23:59:59.000Z

    The disclosure relates to a real time digital image enhancement system for performing the image enhancement segmentation processing required for a real time automated system for detecting and classifying surface imperfections in hot steel slabs. The system provides for simultaneous execution of edge detection processing and intensity threshold processing in parallel on the same image data produced by a sensor device such as a scanning camera. The results of each process are utilized to validate the results of the other process and a resulting image is generated that contains only corresponding segmentation that is produced by both processes. 5 figs.

  20. Microstructure of Super-duplex Stainless Steels

    E-Print Network [OSTI]

    Sharafi, Shahriar

    1993-12-07T23:59:59.000Z

    .1 Introduction 24 3.2 The Fe-Cr-Ni System . . . . . . . . . . . . 25 3.3 The Alloying Elements in Duplex Stainless Steels 33 3.4 Chromium and Nickel Equivalents . . . . . . . 42 3.5 The Effect of Creq/Nieq Ratio on Equilibrium Volume Fraction of Austenite 43 3... / Austenite Balance 6.1 Introduction . 6.2 Thermodynamic Calculations . . . . . 6.3 Equilibrium Isothermal Heat Treatments 6.4 Effect of Ferrite/ Austenite Balance on Hardness 6.5 Equilibrium Partitioning of Alloying Elements 6.6 Precipitation of Cr2N 6...