Powered by Deep Web Technologies
Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Clean Energy Solutions Large Scale CHP and Fuel Cells Program  

Broader source: Energy.gov [DOE]

The New Jersey Economic Development Authority (EDA) is offering grants for the installation of combined heat and power (CHP) or fuel cell systems to commercial, industrial, and institutional...

2

Small Scale CHP and Fuel Cell Incentive Program (New Jersey)  

Broader source: Energy.gov [DOE]

The New Jersey Clean Energy Program (NJCEP) offers incentives for several types of small combined heat and power (CHP) and fuel cell systems that have a generating capacity of 1 MW or less and are...

3

Initial Market Assessment for Small-Scale Biomass-Based CHP  

SciTech Connect (OSTI)

The purpose of this report is to reexamine the energy generation market opportunities for biomass CHP applications smaller than 20 MW. This paper provides an overview of the benefits of and challenges for biomass CHP in terms of policy, including a discussion of the drivers behind, and constraints on, the biomass CHP market. The report provides a summary discussion of the available biomass supply types and technologies that could be used to feed the market. Two primary markets are outlined--rural/agricultural and urban--for small-scale biomass CHP, and illustrate the primary intersections of supply and demand for those markets. The paper concludes by summarizing the potential markets and suggests next steps for identifying and utilizing small-scale biomass.

Brown, E.; Mann, M.

2008-01-01T23:59:59.000Z

4

Field Scale Test and Verification of CHP System at the Ritz Carlton...  

Broader source: Energy.gov (indexed) [DOE]

resulting packaged CHP System which integrated four microturbines, a double-effect absorption chiller, two fuel gas boosters, and the control hardware and software to ensure that...

5

Large scale tracking algorithms.  

SciTech Connect (OSTI)

Low signal-to-noise data processing algorithms for improved detection, tracking, discrimination and situational threat assessment are a key research challenge. As sensor technologies progress, the number of pixels will increase signi cantly. This will result in increased resolution, which could improve object discrimination, but unfortunately, will also result in a significant increase in the number of potential targets to track. Many tracking techniques, like multi-hypothesis trackers, suffer from a combinatorial explosion as the number of potential targets increase. As the resolution increases, the phenomenology applied towards detection algorithms also changes. For low resolution sensors, "blob" tracking is the norm. For higher resolution data, additional information may be employed in the detection and classfication steps. The most challenging scenarios are those where the targets cannot be fully resolved, yet must be tracked and distinguished for neighboring closely spaced objects. Tracking vehicles in an urban environment is an example of such a challenging scenario. This report evaluates several potential tracking algorithms for large-scale tracking in an urban environment.

Hansen, Ross L.; Love, Joshua Alan; Melgaard, David Kennett; Karelitz, David B.; Pitts, Todd Alan; Zollweg, Joshua David; Anderson, Dylan Z.; Nandy, Prabal; Whitlow, Gary L.; Bender, Daniel A.; Byrne, Raymond Harry

2015-01-01T23:59:59.000Z

6

2006-2007 CHP Action Plan, Positioning CHP Value: Solutions for...  

Energy Savers [EERE]

CHP Action Plan, Positioning CHP Value: Solutions for National, Regional and Local Energy Issues, September 2006 2006-2007 CHP Action Plan, Positioning CHP Value: Solutions for...

7

CHP, Waste Heat & District Energy  

Broader source: Energy.gov (indexed) [DOE]

and Applications 25 Oct 11 Today's Electric Grid What is CHP * ASHRAE Handbook: "Combined heat and power (CHP). Simultaneous production of electrical or mechanical energy and...

8

Visualization of Large-Scale Distributed Data  

E-Print Network [OSTI]

that are now considered the "lenses" for examining large-scale data. THE LARGE-SCALE DATA VISUALIZATIONVisualization of Large-Scale Distributed Data Jason Leigh1 , Andrew Johnson1 , Luc Renambot1 representation of data and the interactive manipulation and querying of the visualization. Large-scale data

Johnson, Andrew

9

ITP Distributed Energy: CHP Project Development Handbook  

Broader source: Energy.gov (indexed) [DOE]

CHP. CHP is an efficient, clean, and reliable approach to generating power and thermal energy from a single fuel source. CHP can increase operational efficiency and decrease energy...

10

National CHP Roadmap  

Broader source: Energy.gov (indexed) [DOE]

problems. Yet we have a solution to address all of these simultaneously. Combined heat and power (CHP) can allow us to make progress in solving all of these problems. The...

11

Large-Scale Renewable Energy Guide Webinar  

Broader source: Energy.gov [DOE]

Webinar introduces the “Large Scale Renewable Energy Guide." The webinar will provide an overview of this important FEMP guide, which describes FEMP's approach to large-scale renewable energy projects and provides guidance to Federal agencies and the private sector on how to develop a common process for large-scale renewable projects.

12

Conundrum of the Large Scale Streaming  

E-Print Network [OSTI]

The etiology of the large scale peculiar velocity (large scale streaming motion) of clusters would increasingly seem more tenuous, within the context of the gravitational instability hypothesis. Are there any alternative testable models possibly accounting for such large scale streaming of clusters?

T. M. Malm

1999-09-12T23:59:59.000Z

13

ITP Industrial Distributed Energy: CHP Market Potential in the...  

Broader source: Energy.gov (indexed) [DOE]

diesel generators that are being converted to CHP. Idaho - There are a large number of potato and beet sugar processing facilities in the state that require large amounts of both...

14

HUD CHP GUIDE #1 - Questions and Answers ON CHP FOR MULTIFAMILIY...  

Broader source: Energy.gov (indexed) [DOE]

2 - FEASIBILITY SCREENING FOR CHP IN MULTIFAMILY HOUSING, May 2009 Promoting Combined Heat and Power (CHP) for Multifamily Properties, 2008 HUD Combined Heat and Power (CHP)...

15

ITP Industrial Distributed Energy: 3rd Annual National CHP Roadmap...  

Broader source: Energy.gov (indexed) [DOE]

3 rd Annual National CHP Roadmap Workshop CHP and DER for Federal Facilities EPA CHP Partnership Meeting A Combined Event for Federal Facility Managers And CHP Advocates October...

16

5th Annual CHP Roadmap Workshop Breakout Group Results, September...  

Broader source: Energy.gov (indexed) [DOE]

Heat and Power (CHP) Workshop from the following breakout groups: CHP Technologies, CHP Markets, Utility and Regulatory Issues, and CHP Education and Outreach 2004austin.pdf...

17

Combined heat and power (CHP or cogeneration) for saving energy and carbon in commercial buildings  

SciTech Connect (OSTI)

Combined Heat and Power (CHP) systems simultaneously deliver electric, thermal and mechanical energy services and thus use fuel very efficiently. Today's small-scale CHP systems already provide heat, cooling and electricity at nearly twice the fuel efficiency of heat and power based on power remote plants and onsite hot water and space heating. In this paper, the authors have refined and extended the assessments of small-scale building CHP previously done by the authors. They estimate the energy and carbon savings for existing small-scale CHP technology such as reciprocating engines and two promising new CHP technologies--microturbines and fuel cells--for commercial buildings. In 2010 the authors estimate that small-scale CHP will emit 14--65% less carbon than separate heat and power (SHP) depending on the technologies compared. They estimate that these technologies in commercial buildings could save nearly two-thirds of a quadrillion Btu's of energy and 23 million tonnes of carbon.

Kaarsberg, T.; Fiskum, R.; Romm, J.; Rosenfeld, A.; Koomey, J.; Teagan, W.P.

1998-07-01T23:59:59.000Z

18

Large Scale Energy Storage: From Nanomaterials to Large Systems  

E-Print Network [OSTI]

Large Scale Energy Storage: From Nanomaterials to Large Systems Wednesday October 26, 2011, Babbio energy storage devices. Specifically, this talk discusses 1) the challenges for grid scale of emergent technologies with ultralow costs on new energy storage materials and mechanisms. Dr. Jun Liu

Fisher, Frank

19

Modelling Danish local CHP on market conditions 1 IAEE European Conference: Modelling in Energy Economics and Policy  

E-Print Network [OSTI]

Modelling Danish local CHP on market conditions 1 6th IAEE European Conference: Modelling in Energy Economics and Policy 2 - 3 September, Zürich, Switzerland Modelling Danish local CHP on market conditions, the development of local combined heat and power (CHP) plants has been characterised by large growth throughout

20

Microfluidic Large-Scale Integration: The Evolution  

E-Print Network [OSTI]

Microfluidic Large-Scale Integration: The Evolution of Design Rules for Biological Automation, polydimethylsiloxane Abstract Microfluidic large-scale integration (mLSI) refers to the develop- ment of microfluidic, are discussed. Several microfluidic components used as building blocks to create effective, complex, and highly

Quake, Stephen R.

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Large-Scale in the United  

E-Print Network [OSTI]

Large-Scale Offshore Wind Power in the United States ASSESSMENT OF OPPORTUNITIES AND BARRIERS, including 10% post consumer waste. #12;Large-Scale Offshore Wind Power in the United States ASSESSMENT Energy, Office of Wind and Water Power Technologies for their financial and technical support

22

DLFM library tools for large scale dynamic applications.  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DLFM library tools for large scale dynamic applications DLFM library tools for large scale dynamic applications Large scale Python and other dynamic applications may spend huge...

23

HUD CHP GUIDE #2 - FEASIBILITY SCREENING FOR CHP IN MULTIFAMILY...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

(HUD's) 2002 Energy Action Plan includes an initiative to promote the use of combined heat and power (CHP) in multifamily housing. This 2009 guide "Feasibility Screening for...

24

CHP R&D Project Descriptions  

Broader source: Energy.gov [DOE]

The CHP R&D project portfolio includes advanced reciprocating engine systems (ARES), packaged CHP systems, high-value applications, fuel-flexible CHP, and demonstrations of these technologies. Project fact sheets and short project descriptions are provided below:

25

CHP - New Technologies that Work  

E-Print Network [OSTI]

Efficiency 1. Reduces fuel use and operating costs 3. Increases energy security and improves power quality 2. Produces environmental benefits CHP System Design Options BUILDING DEMAND THERMAL ELECTRICAL EXPORT or WASTE } HIGHEST... and Atmosphere ? 6-8 Points ? Materials and Resources ? Environmental Quality ? Design Excellence ? 1 Point https://www.usgbc.org/ CHP System Qualifications ?CHP system efficiency exceeds 60% ?Environmental performance exceeds comparable NG boiler...

Herweck, R.

2012-01-01T23:59:59.000Z

26

Accelerating CHP Deployment, United States Energy Association...  

Broader source: Energy.gov (indexed) [DOE]

as possible considering the diverse interests represented in the national combined heat and power (CHP) dialogue. This paper includes recommendations for accelerating CHP...

27

ANALYSIS OF CHP POTENTIAL AT FEDERAL SITES  

SciTech Connect (OSTI)

This document was prepared at the request of the U.S. Department of Energy's (DOE's) Federal Energy Management Program (FEMP) under its Technical Guidance and Assistance and Project Financing Programs. The purpose was to provide an estimate of the national potential for combined heat and power (also known as CHP; cogeneration; or cooling, heating, and power) applications at federal facilities and the associated costs and benefits including energy and emission savings. The report provides a broad overview for the U.S. Department of Energy (DOE) and other agencies on when and where CHP systems are most likely to serve the government's best interest. FEMP's mission is to reduce the cost to and environmental impact of the federal government by advancing energy efficiency and water conservation, promoting the use of renewable energy, and improving utility management decisions at federal sites. FEMP programs are driven by its customers: federal agency sites. FEMP monitors energy efficiency and renewable energy technology developments and mounts ''technology-specific'' programs to make technologies that are in strong demand by agencies more accessible. FEMP's role is often one of helping the federal government ''lead by example'' through the use of advanced energy efficiency/renewable energy (EERE) technologies in its own buildings and facilities. CHP was highlighted in the Bush Administration's National Energy Policy Report as a commercially available technology offering extraordinary benefits in terms of energy efficiencies and emission reductions. FEMP's criteria for emphasizing a technology are that it must be commercially available; be proven but underutilized; have a strong constituency and momentum; offer large energy savings and other benefits of interest to federal sites and FEMP mission; be in demand; and carry sufficient federal market potential. As discussed in the report, CHP meets all of these criteria. Executive Order 13123 directs federal facilities to use CHP when life-cycle costs indicate energy reduction goals will be met. FEMP can assist facilities to conduct this analysis. The model developed for this report estimates the magnitude of CHP that could be implemented under various performance and economic assumptions associated with different applications. This model may be useful for other energy technologies. It can be adapted to estimate the market potential in federal buildings for any energy system based on the cost and performance parameters that a user desires to assess. The model already incorporates a standard set of parameters based on available data for federal buildings including total building space, building type, energy use intensity, fuel costs, and the performance of many prime movers commonly used in CHP applications. These and other variables can be adjusted to meet user needs or updated in the future as new data become available.

HADLEY, S.W.

2002-03-11T23:59:59.000Z

28

Program Management for Large Scale Engineering Programs  

E-Print Network [OSTI]

The goal of this whitepaper is to summarize the LAI research that applies to program management. The context of most of the research discussed in this whitepaper are large-scale engineering programs, particularly in the ...

Oehmen, Josef

29

Transition from Large-Scale to Small-Scale Dynamo  

SciTech Connect (OSTI)

The dynamo equations are solved numerically with a helical forcing corresponding to the Roberts flow. In the fully turbulent regime the flow behaves as a Roberts flow on long time scales, plus turbulent fluctuations at short time scales. The dynamo onset is controlled by the long time scales of the flow, in agreement with the former Karlsruhe experimental results. The is governed by a generalized {alpha} effect, which includes both the usual {alpha} effect and turbulent diffusion, plus all higher order effects. Beyond the onset we find that this generalized {alpha} effect scales as O(Rm{sup -1}), suggesting the takeover of small-scale dynamo action. This is confirmed by simulations in which dynamo occurs even if the large-scale field is artificially suppressed.

Ponty, Y. [Universite de Nice Sophia-Antipolis, CNRS, Observatoire de la Cote d'Azur, B.P. 4229, Nice cedex 04 (France); Plunian, F. [Institut des Sciences de la Terre, CNRS, Universite Joseph Fourier, B.P. 53, 38041 Grenoble cedex 09 (France)

2011-04-15T23:59:59.000Z

30

Large-scale simulations of reionization  

SciTech Connect (OSTI)

We use cosmological simulations to explore the large-scale effects of reionization. Since reionization is a process that involves a large dynamic range--from galaxies to rare bright quasars--we need to be able to cover a significant volume of the universe in our simulation without losing the important small scale effects from galaxies. Here we have taken an approach that uses clumping factors derived from small scale simulations to approximate the radiative transfer on the sub-cell scales. Using this technique, we can cover a simulation size up to 1280h{sup -1} Mpc with 10h{sup -1} Mpc cells. This allows us to construct synthetic spectra of quasars similar to observed spectra of SDSS quasars at high redshifts and compare them to the observational data. These spectra can then be analyzed for HII region sizes, the presence of the Gunn-Peterson trough, and the Lyman-{alpha} forest.

Kohler, Katharina; /JILA, Boulder /Fermilab; Gnedin, Nickolay Y.; /Fermilab; Hamilton, Andrew J.S.; /JILA, Boulder

2005-11-01T23:59:59.000Z

31

Large scale structure of the Universe: Introduction  

E-Print Network [OSTI]

The changes of main paradigms on the structure and evolution of the Universe are reviewed. Two puzzles of the modern cosmology, the mean density of matter and the regularity of the Universe on large scales, as well as the possibility to solve these puzzles by the introduction of more complicated form of inflation, are discussed.

J. Einasto

1997-11-26T23:59:59.000Z

32

Dark Matter and Large Scale Structure  

E-Print Network [OSTI]

A review of the study of dark matter and large scale structure of the Universe at Tartu Observatory is given. Tartu astronomers have participated in this development, starting from Ernst "Opik and Grigori Kuzmin, and continuing with the present generation of astronomers. Our goal was to understand better the structure, origin and evolution of the Universe.

J. Einasto

2000-12-07T23:59:59.000Z

33

7, 1553315563, 2007 Large-scale  

E-Print Network [OSTI]

the Pacific, correlations with CO, CO2, CH4, and C2Cl4 were dif- fuse overall, but recognizable on flights out Chemistry and Physics Discussions Factors influencing the large-scale distribution of Hg in the Mexico City the Intercontinental Chemical Transport Experiment Phase B (INTEX-B) cam- paign in spring 2006. Flights were conducted

Paris-Sud XI, Université de

34

3rd Annual National CHP Roadmap Workshop CHP and DER for Federal...  

Broader source: Energy.gov (indexed) [DOE]

More Documents & Publications National CHP Roadmap: Doubling Combined Heat and Power Capacity in the United States by 2010, March 2001 CHP: Connecting the Gap between Markets...

35

RECOVERY ACT CASE STUDY CHP and district energy serve Texas A&M's 5,200-acre campus, which includes 750 buildings.  

E-Print Network [OSTI]

RECOVERY ACT CASE STUDY CHP and district energy serve Texas A&M's 5,200-acre campus, which includes in Cost Savings at Large University Recovery Act Funding Supports CHP Texas A&M University is operating a high-efficiency combined heat and power (CHP) system at its district energy campus in College Station

36

CHP RAC Handout_71614.cdr  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combined heat and power (CHP) is an efficient and clean approach to generating on-site electric power and useful thermal energy from a single fuel source. Instead of purchasing...

37

State Barriers to CHP Development  

E-Print Network [OSTI]

Every year, ACEEE collects data on regulatory policies in each state that theoretically serve to promote and discourage combined heat and power (CHP) development. In our annual State Energy Efficiency Scorecard (5), we assess the regulatory...

Chittum, A.; Kaufman, N.

2011-01-01T23:59:59.000Z

38

Materials Science and Materials Chemistry for Large Scale Electrochemi...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Science and Materials Chemistry for Large Scale Electrochemical Energy Storage: From Transportation to Electrical Grid Materials Science and Materials Chemistry for Large Scale...

39

Hybrid Parallelism for Volume Rendering at Large Scale at NERSC  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Volume Rendering at Large Scale Hybrid Parallelism for Volume Rendering at Large Scale volrend-swes.png We studied the performance and scalability characteristics of hybrid''...

40

Large-Scale PV Integration Study  

SciTech Connect (OSTI)

This research effort evaluates the impact of large-scale photovoltaic (PV) and distributed generation (DG) output on NV Energy’s electric grid system in southern Nevada. It analyzes the ability of NV Energy’s generation to accommodate increasing amounts of utility-scale PV and DG, and the resulting cost of integrating variable renewable resources. The study was jointly funded by the United States Department of Energy and NV Energy, and conducted by a project team comprised of industry experts and research scientists from Navigant Consulting Inc., Sandia National Laboratories, Pacific Northwest National Laboratory and NV Energy.

Lu, Shuai; Etingov, Pavel V.; Diao, Ruisheng; Ma, Jian; Samaan, Nader A.; Makarov, Yuri V.; Guo, Xinxin; Hafen, Ryan P.; Jin, Chunlian; Kirkham, Harold; Shlatz, Eugene; Frantzis, Lisa; McClive, Timothy; Karlson, Gregory; Acharya, Dhruv; Ellis, Abraham; Stein, Joshua; Hansen, Clifford; Chadliev, Vladimir; Smart, Michael; Salgo, Richard; Sorensen, Rahn; Allen, Barbara; Idelchik, Boris

2011-07-29T23:59:59.000Z

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Performance Assessment Report Domain CHP System  

E-Print Network [OSTI]

Performance Assessment Report for the Domain CHP System November 2005 By Burns & McDonnell Engineering #12;Domain CHP System Performance Assessment Report for the Packaged Cooling, Heating and Power

Oak Ridge National Laboratory

42

Suggested Treatment of CHP Within an EERS Context  

E-Print Network [OSTI]

Discussion Draft: Do not cite SUGGESTED TREATMENT OF CHP WITHIN AN EERS CONTEXT Anna Chittum Research Associate R. Neal Elliott, Ph.D., P.E. Associate Director for Research Dan Trombley Engineering Associate Suzanne Watson Policy... Orleans, LA, May 12-15, 2009 S CHP,ELEC = [(E CHP * H GRID ) ? (F CHP, TOTAL ? F CHP, THERMAL )] / H GRID Expressing the above equation in general form, yields: S CHP,ELEC = E CHP * [1-(F CHP, TOTAL ? F CHP, THERMAL ) / (E CHP * H GRID...

Chittum, A.; Elliott, R. N.; Trombley, D.; Watson, S.

43

1 National Roadmap Committee for Large-Scale Research Facilities the netherlands' roadmap for large-scale research facilities  

E-Print Network [OSTI]

#12;1 National Roadmap Committee for Large-Scale Research Facilities the netherlands' roadmap for large-scale research facilities #12;2 National Roadmap Committee for Large-Scale Research Facilities1 by Roselinde Supheert) #12;3 National Roadmap Committee for Large-Scale Research Facilities The Netherlands

Horn, David

44

Large-scale Intelligent Transporation Systems simulation  

SciTech Connect (OSTI)

A prototype computer system has been developed which defines a high-level architecture for a large-scale, comprehensive, scalable simulation of an Intelligent Transportation System (ITS) capable of running on massively parallel computers and distributed (networked) computer systems. The prototype includes the modelling of instrumented ``smart`` vehicles with in-vehicle navigation units capable of optimal route planning and Traffic Management Centers (TMC). The TMC has probe vehicle tracking capabilities (display position and attributes of instrumented vehicles), and can provide 2-way interaction with traffic to provide advisories and link times. Both the in-vehicle navigation module and the TMC feature detailed graphical user interfaces to support human-factors studies. The prototype has been developed on a distributed system of networked UNIX computers but is designed to run on ANL`s IBM SP-X parallel computer system for large scale problems. A novel feature of our design is that vehicles will be represented by autonomus computer processes, each with a behavior model which performs independent route selection and reacts to external traffic events much like real vehicles. With this approach, one will be able to take advantage of emerging massively parallel processor (MPP) systems.

Ewing, T.; Canfield, T.; Hannebutte, U.; Levine, D.; Tentner, A.

1995-06-01T23:59:59.000Z

45

Federal CHP Potential 1 Does your facility have CHP  

E-Print Network [OSTI]

. The Federal building types with greatest CHP potential are hospitals, industrial, and R&D facilities. Figure 1) systems provide thermal energy for buildings or processes while at the same time generating electricity extraordinary efficiency and environmental benefits. The U.S. Department of Energy's (DOE's) Federal Energy

Oak Ridge National Laboratory

46

Large Scale GSHP as Alternative Energy for American Farmers Geothermal...  

Open Energy Info (EERE)

Scale GSHP as Alternative Energy for American Farmers Geothermal Project Jump to: navigation, search Last modified on July 22, 2011. Project Title Large Scale GSHP as Alternative...

47

CHP -- A revolution in the making  

SciTech Connect (OSTI)

Liberalization, globalization, and particularly climate change are changing energy thinking. In the future, climate change will be tackled by improved energy efficiency and carbon neutral sources of energy, but much more could be done today by the more widespread use of CHP. CHP has made reasonably good progress in the UK and Europe, due to energy industry liberalization and the widespread availability of gas. But the pursuit of sustainability objectives requires government intervention into liberalized markets. While the current UK Government is a strong supporter of CHP, major opportunities to develop CHP were missed in favor of less efficient CCGT power stations over the last decade. The two critical policy issues in the UK now are the proposed tax on the business use of energy and the current reform of electricity trading arrangements. Both could impact favorably on the development of CHP. The UK CHP Association, COGEN Europe and the International Cogeneration Alliance continue to press the case for CHP.

Green, D.

1999-07-01T23:59:59.000Z

48

Theoretical Tools for Large Scale Structure  

E-Print Network [OSTI]

We review the main theoretical aspects of the structure formation paradigm which impinge upon wide angle surveys: the early universe generation of gravitational metric fluctuations from quantum noise in scalar inflaton fields; the well understood and computed linear regime of CMB anisotropy and large scale structure (LSS) generation; the weakly nonlinear regime, where higher order perturbation theory works well, and where the cosmic web picture operates, describing an interconnected LSS of clusters bridged by filaments, with membranes as the intrafilament webbing. Current CMB+LSS data favour the simplest inflation-based $\\Lambda$CDM models, with a primordial spectral index within about 5% of scale invariant and $\\Omega_\\Lambda \\approx 2/3$, similar to that inferred from SNIa observations, and with open CDM models strongly disfavoured. The attack on the nonlinear regime with a variety of N-body and gas codes is described, as are the excursion set and peak-patch semianalytic approaches to object collapse. The ingredients are mixed together in an illustrative gasdynamical simulation of dense supercluster formation.

J. R. Bond; L. Kofman; D. Pogosyan; J. Wadsley

1998-10-06T23:59:59.000Z

49

FEMP Helps Federal Facilities Develop Large-Scale Renewable Energy...  

Energy Savers [EERE]

FEMP Helps Federal Facilities Develop Large-Scale Renewable Energy Projects FEMP Helps Federal Facilities Develop Large-Scale Renewable Energy Projects August 21, 2013 - 12:00am...

50

Synchronization of coupled large-scale Boolean networks  

SciTech Connect (OSTI)

This paper investigates the complete synchronization and partial synchronization of two large-scale Boolean networks. First, the aggregation algorithm towards large-scale Boolean network is reviewed. Second, the aggregation algorithm is applied to study the complete synchronization and partial synchronization of large-scale Boolean networks. Finally, an illustrative example is presented to show the efficiency of the proposed results.

Li, Fangfei, E-mail: li-fangfei@163.com [Department of Mathematics, East China University of Science and Technology, No. 130, Meilong Road, Shanghai, Shanghai 200237 (China)] [Department of Mathematics, East China University of Science and Technology, No. 130, Meilong Road, Shanghai, Shanghai 200237 (China)

2014-03-15T23:59:59.000Z

51

CHP: Enabling Resilient Energy Infrastructure - Presentations...  

Broader source: Energy.gov (indexed) [DOE]

- Presentations from April 2013 Webinar Recognizing the benefits of combined heat and power (CHP) and its current underutilization as an energy resource in the United...

52

State Opportunities for Action: Update of States' CHP Activities...  

Broader source: Energy.gov (indexed) [DOE]

& Publications CHP: Connecting the Gap between Markets and Utility Interconnection and Tariff Practices, 2006 Challenges Facing CHP: A State-by-State Assessment (ACEEE), 2011 2008...

53

Promoting Combined Heat and Power (CHP) for Multifamily Properties...  

Broader source: Energy.gov (indexed) [DOE]

Promoting Combined Heat and Power (CHP) for Multifamily Properties, 2008 Promoting Combined Heat and Power (CHP) for Multifamily Properties, 2008 The U.S. Department of Housing and...

54

Combined Heat and Power (CHP) Resource Guide for Hospital Applications...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combined Heat and Power (CHP) Resource Guide for Hospital Applications, 2007 Combined Heat and Power (CHP) Resource Guide for Hospital Applications, 2007 The objective of this 2007...

55

Combined Heat and Power: Expanding CHP in Your State | Department...  

Broader source: Energy.gov (indexed) [DOE]

Combined Heat and Power: Expanding CHP in Your State Combined Heat and Power: Expanding CHP in Your State This presentation, given through the DOE's Technical Assitance Program...

56

National CHP Roadmap: Doubling Combined Heat and Power Capacity...  

Broader source: Energy.gov (indexed) [DOE]

National CHP Roadmap: Doubling Combined Heat and Power Capacity in the United States by 2010, March 2001 National CHP Roadmap: Doubling Combined Heat and Power Capacity in the...

57

Development of an Advanced Combined Heat and Power (CHP) System...  

Broader source: Energy.gov (indexed) [DOE]

an Advanced Combined Heat and Power (CHP) System Utilizing Off-Gas from Coke Calcination - Fact Sheet, 2011 Development of an Advanced Combined Heat and Power (CHP) System...

58

Combined Heat and Power (CHP) Integrated with Burners for Packaged...  

Broader source: Energy.gov (indexed) [DOE]

Combined Heat and Power (CHP) Integrated with Burners for Packaged Boilers Combined Heat and Power (CHP) Integrated with Burners for Packaged Boilers Providing Clean, Low-Cost,...

59

Database (Report) of U.S. CHP Installations Incorporating Thermal...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Database (Report) of U.S. CHP Installations Incorporating Thermal Energy Storage (TES) andor Turbine Inlet Cooling (TIC), 2004 Database (Report) of U.S. CHP Installations...

60

CHP: A Technical & Economic Compliance Strategy - SEE Action...  

Broader source: Energy.gov (indexed) [DOE]

CHP: A Technical & Economic Compliance Strategy - SEE Action Webinar, January 2012 CHP: A Technical & Economic Compliance Strategy - SEE Action Webinar, January 2012 This...

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Combustion Turbine CHP System for Food Processing Industry -...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combustion Turbine CHP System for Food Processing Industry - Presentation by Frito-Lay North America, June 2011 Combustion Turbine CHP System for Food Processing Industry -...

62

Integrated CHP/Advanced Reciprocating Internal Combustion Engine...  

Broader source: Energy.gov (indexed) [DOE]

With Landfill Gas, October 2002 CHP and Bioenergy Systems for Landfills and Wastewater Treatment Plants CHP and Bioenergy for Landfills and Wastewater Treatment Plants:...

63

Low-Cost Packaged CHP System with Reduced Emissions - Presentation...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Low-Cost Packaged CHP System with Reduced Emissions - Presentation by Cummins Power Generation, June 2011 Low-Cost Packaged CHP System with Reduced Emissions - Presentation by...

64

Extragalactic jets on subpc and large scales  

E-Print Network [OSTI]

Jets can be probed in their innermost regions (d~0.1 pc) through the study of the relativistically-boosted emission of blazars. On the other extreme of spatial scales, the study of structure and dynamics of extragalactic relativistic jets received renewed impulse after the discovery, made by Chandra, of bright X-ray emission from regions at distances larger than hundreds of kpc from the central engine. At both scales it is thus possible to infer some of the basic parameters of the flow (speed, density, magnetic field intensity, power). After a brief review of the available observational evidence, I discuss how the comparison between the physical quantities independently derived at the two scales can be used to shed light on the global dynamics of the jet, from the innermost regions to the hundreds of kpc scale.

F. Tavecchio

2007-08-20T23:59:59.000Z

65

Large scale prediction models and algorithms  

E-Print Network [OSTI]

Over 90% of the data available across the world has been produced over the last two years, and the trend is increasing. It has therefore become paramount to develop algorithms which are able to scale to very high dimensions. ...

Monsch, Matthieu (Matthieu Frederic)

2013-01-01T23:59:59.000Z

66

Hydranet: network support for scaling of large scale servic es  

E-Print Network [OSTI]

With the explosive growth of demand for services on the Internet, the networking infrastructure (routers 7 protocols, servers) is under considerable stress. Mechanisms are needed for current and future IP services to scale in a client transparent...

Chawla, Hamesh

1998-01-01T23:59:59.000Z

67

Large Scale Computing and Storage Requirements for Nuclear Physics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Science at NERSC HPC Requirements Reviews Requirements for Science: Target 2014 Nuclear Physics (NP) Large Scale Computing and Storage Requirements for Nuclear Physics:...

68

Advancing Cellulosic Ethanol for Large Scale Sustainable Transportation  

E-Print Network [OSTI]

Advancing Cellulosic Ethanol for Large Scale SustainableHydrogen Batteries Nuclear By Lee Lynd, Dartmouth Ethanol •Ethanol, ethyl alcohol, fermentation ethanol, or just “

Wyman, C

2007-01-01T23:59:59.000Z

69

Solving large scale polynomial convex problems on \\ell_1/nuclear ...  

E-Print Network [OSTI]

Oct 24, 2012 ... Solving large scale polynomial convex problems on \\ell_1/nuclear norm balls by randomized first-order algorithms. Aharon Ben-Tal (abental ...

Aharon Ben-Tal

2012-10-24T23:59:59.000Z

70

Large Scale GSHP as Alternative Energy for American Farmers  

Broader source: Energy.gov (indexed) [DOE]

Large Scale GSHP as Alternative Energy for American Farmers Shawn Yunsheng Xu University of Missouri May 18, 2010 This presentation does not contain any proprietary confidential,...

71

Optimization Online - Large-Scale Linear Programming Techniques ...  

E-Print Network [OSTI]

Feb 12, 2002 ... Large-Scale Linear Programming Techniques for the Design of Protein Folding Potentials. Michael Wagner (mwagner ***at*** odu.edu)

Michael Wagner

2002-02-12T23:59:59.000Z

72

CHP Technical Assistance Partnerships (CHP TAPs) | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energyon ArmedWaste andAccess toSustainableClimateSealingColdEnergyClimateCCHICAGO HOUSE CHP

73

Are CHP Systems Ready for Commercial Buildings?  

SciTech Connect (OSTI)

This paper highlights challenges associated with integration of CHP systems with existing buildings and maintaining their performance over time. The paper also identifies key research and development needs to address the challenges, so that CHP technologies can deliver the promised performance and reach their full potential market penetration.

Katipamula, Srinivas; Brambley, Michael R.; Zaltash, Abdi; Sands, Jim

2005-06-27T23:59:59.000Z

74

Large-Scale Wind Training Program  

SciTech Connect (OSTI)

Project objective is to develop a credit-bearing wind technician program and a non-credit safety training program, train faculty, and purchase/install large wind training equipment.

Porter, Richard L. [Hudson Valley Community College

2013-07-01T23:59:59.000Z

75

CHP Deployment | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy Cooperation |South42.2 (AprilBiden SaysEnergy Office FY144 1.DOE FCHP DeploymentCHP

76

Quick Start Guide: Completing Your CHP September 2013  

E-Print Network [OSTI]

Quick Start Guide: Completing Your CHP September 2013 This Laboratory Safety Manual (LSM) is your of what the Washington Department of Labor and Industries calls a "Chemical Hygiene Plan (CHP)." The CHP is required for all laboratories that use hazardous chemicals. EH&S developed much of your CHP for you

Wilcock, William

77

Large-Scale Eucalyptus Energy Farms and Power Cogeneration1  

E-Print Network [OSTI]

Large-Scale Eucalyptus Energy Farms and Power Cogeneration1 Robert C. Noronla2 The initiation of a large-scale cogeneration project, especially one that combines construction of the power generation supplemental fuel source must be sought if the cogeneration facility will consume more fuel than

Standiford, Richard B.

78

Large Scale Parameter Sweep Studies Using Distributed Matlab  

E-Print Network [OSTI]

1 Large Scale Parameter Sweep Studies Using Distributed Matlab Vikas Argod Graduate Assistant 225. The implementation is done in Matlab. The discussion extends to large scale problems of similar type using distributed matlab. Use of distributed matlab reduced computation time significantly

Bjørnstad, Ottar Nordal

79

Attack Containment Framework for Large-Scale Critical Infrastructures  

E-Print Network [OSTI]

Attack Containment Framework for Large-Scale Critical Infrastructures Hoang Nguyen Department-- We present an attack containment framework against value-changing attacks in large-scale critical structure, called attack container, which captures the trust behavior of a group of nodes and assists

Nahrstedt, Klara

80

POWER SYSTEMS STABILITY WITH LARGE-SCALE WIND POWER PENETRATION  

E-Print Network [OSTI]

of offshore wind farms, wind power fluctuations may introduce several challenges to reliable power system behaviour due to natural wind fluctuations. The rapid power fluctuations from the large scale wind farms Generation Control (AGC) system which includes large- scale wind farms for long-term stability simulation

Bak-Jensen, Birgitte

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Modeling emergent large-scale structures of barchan dune fields  

E-Print Network [OSTI]

that cannot be readily explained by examining the dynamics at the scale of single dunes, or by appealingModeling emergent large-scale structures of barchan dune fields S. Worman , A.B. Murray , R for a range of field-scale phenomena including isolated patches of dunes and heterogeneous arrangements

Claudin, Philippe

82

Large Scale Weather Control Using Nuclear Reactors  

E-Print Network [OSTI]

It is pointed out that controlled release of thermal energy from fission type nuclear reactors can be used to alter weather patterns over significantly large geographical regions. (1) Nuclear heat creates a low pressure region, which can be used to draw moist air from oceans, onto deserts. (2) Creation of low pressure zones over oceans using Nuclear heat can lead to Controlled Cyclone Creation (CCC).(3) Nuclear heat can also be used to melt glaciers and control water flow in rivers.

Moninder Singh Modgil

2002-10-02T23:59:59.000Z

83

Large Scale Weather Control Using Nuclear Reactors  

E-Print Network [OSTI]

It is pointed out that controlled release of thermal energy from fission type nuclear reactors can be used to alter weather patterns over significantly large geographical regions. (1) Nuclear heat creates a low pressure region, which can be used to draw moist air from oceans, onto deserts. (2) Creation of low pressure zones over oceans using Nuclear heat can lead to Controlled Cyclone Creation (CCC).(3) Nuclear heat can also be used to melt glaciers and control water flow in rivers.

Singh-Modgil, M

2002-01-01T23:59:59.000Z

84

Goethite Bench-scale and Large-scale Preparation Tests  

SciTech Connect (OSTI)

The Hanford Waste Treatment and Immobilization Plant (WTP) is the keystone for cleanup of high-level radioactive waste from our nation's nuclear defense program. The WTP will process high-level waste from the Hanford tanks and produce immobilized high-level waste glass for disposal at a national repository, low activity waste (LAW) glass, and liquid effluent from the vitrification off-gas scrubbers. The liquid effluent will be stabilized into a secondary waste form (e.g. grout-like material) and disposed on the Hanford site in the Integrated Disposal Facility (IDF) along with the low-activity waste glass. The major long-term environmental impact at Hanford results from technetium that volatilizes from the WTP melters and finally resides in the secondary waste. Laboratory studies have indicated that pertechnetate ({sup 99}TcO{sub 4}{sup -}) can be reduced and captured into a solid solution of {alpha}-FeOOH, goethite (Um 2010). Goethite is a stable mineral and can significantly retard the release of technetium to the environment from the IDF. The laboratory studies were conducted using reaction times of many days, which is typical of environmental subsurface reactions that were the genesis of this new process. This study was the first step in considering adaptation of the slow laboratory steps to a larger-scale and faster process that could be conducted either within the WTP or within the effluent treatment facility (ETF). Two levels of scale-up tests were conducted (25x and 400x). The largest scale-up produced slurries of Fe-rich precipitates that contained rhenium as a nonradioactive surrogate for {sup 99}Tc. The slurries were used in melter tests at Vitreous State Laboratory (VSL) to determine whether captured rhenium was less volatile in the vitrification process than rhenium in an unmodified feed. A critical step in the technetium immobilization process is to chemically reduce Tc(VII) in the pertechnetate (TcO{sub 4}{sup -}) to Tc(Iv)by reaction with the ferrous ion, Fe{sup 2+}-Fe{sup 2+} is oxidized to Fe{sup 3+} - in the presence of goethite seed particles. Rhenium does not mimic that process; it is not a strong enough reducing agent to duplicate the TcO{sub 4}{sup -}/Fe{sup 2+} redox reactions. Laboratory tests conducted in parallel with these scaled tests identified modifications to the liquid chemistry necessary to reduce ReO{sub 4}{sup -} and capture rhenium in the solids at levels similar to those achieved by Um (2010) for inclusion of Tc into goethite. By implementing these changes, Re was incorporated into Fe-rich solids for testing at VSL. The changes also changed the phase of iron that was in the slurry product: rather than forming goethite ({alpha}-FeOOH), the process produced magnetite (Fe{sub 3}O{sub 4}). Magnetite was considered by Pacific Northwest National Laboratory (PNNL) and VSL to probably be a better product to improve Re retention in the melter because it decomposes at a higher temperature than goethite (1538 C vs. 136 C). The feasibility tests at VSL were conducted using Re-rich magnetite. The tests did not indicate an improved retention of Re in the glass during vitrification, but they did indicate an improved melting rate (+60%), which could have significant impact on HLW processing. It is still to be shown whether the Re is a solid solution in the magnetite as {sup 99}Tc was determined to be in goethite.

Josephson, Gary B.; Westsik, Joseph H.

2011-10-23T23:59:59.000Z

85

Autonomie Large Scale Deployment | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTie Ltd: Scope ChangeL-01-06 AuditAugust 5,ReDevelopments |1 DOE0Large

86

Superconducting materials for large scale applications  

SciTech Connect (OSTI)

Significant improvements in the properties ofsuperconducting materials have occurred recently. These improvements arebeing incorporated into the latest generation of wires, cables, and tapesthat are being used in a broad range of prototype devices. These devicesinclude new, high field accelerator and NMR magnets, magnets for fusionpower experiments, motors, generators, and power transmission lines.These prototype magnets are joining a wide array of existing applicationsthat utilize the unique capabilities of superconducting magnets:accelerators such as the Large Hadron Collider, fusion experiments suchas ITER, 930 MHz NMR, and 4 Tesla MRI. In addition, promising newmaterials such as MgB2 have been discovered and are being studied inorder to assess their potential for new applications. In this paper, wewill review the key developments that are leading to these newapplications for superconducting materials. In some cases, the key factoris improved understanding or development of materials with significantlyimproved properties. An example of the former is the development of Nb3Snfor use in high field magnets for accelerators. In other cases, thedevelopment is being driven by the application. The aggressive effort todevelop HTS tapes is being driven primarily by the need for materialsthat can operate at temperatures of 50 K and higher. The implications ofthese two drivers for further developments will be discussed. Finally, wewill discuss the areas where further improvements are needed in order fornew applications to be realized.

Scanlan, Ronald M.; Malozemoff, Alexis P.; Larbalestier, David C.

2004-05-06T23:59:59.000Z

87

Stabilization of Large Scale Structure by Adhesive Gravitational Clustering  

E-Print Network [OSTI]

The interplay between gravitational and dispersive forces in a multi-streamed medium leads to an effect which is exposed in the present note as the genuine driving force of stabilization of large-scale structure. The conception of `adhesive gravitational clustering' is advanced to interlock the fairly well-understood epoch of formation of large-scale structure and the onset of virialization into objects that are dynamically in equilibrium with their large-scale structure environment. The classical `adhesion model' is opposed to a class of more general models traced from the physical origin of adhesion in kinetic theory.

Thomas Buchert

1999-08-13T23:59:59.000Z

88

Holographic principle and large scale structure in the universe  

E-Print Network [OSTI]

A reasonable representation of large scale structure, in a closed universe so large it's nearly flat, can be developed by extending the holographic principle and assuming the bits of information describing the distribution of matter density in the universe remain in thermal equilibrium with the cosmic microwave background radiation. The analysis identifies three levels of self-similar large scale structure, corresponding to superclusters, galaxies, and star clusters, between today's observable universe and stellar systems. The self-similarity arises because, according to the virial theorem, the average gravitational potential energy per unit volume in each structural level is the same and depends only on the gravitational constant. The analysis indicates stellar systems first formed at z\\approx62, consistent with the findings of Naoz et al, and self-similar large scale structures began to appear at redshift z\\approx4. It outlines general features of development of self-similar large scale structures at redshift z<4. The analysis is consistent with observations for angular momentum of large scale structures as a function of mass, and average speed of substructures within large scale structures. The analysis also indicates relaxation times for star clusters are generally less than the age of the universe and relaxation times for more massive structures are greater than the age of the universe.

T. R. Mongan

2011-08-10T23:59:59.000Z

89

How Three Retail Buyers Source Large-Scale Solar Electricity  

Office of Energy Efficiency and Renewable Energy (EERE)

Large-scale, non-utility solar power purchase agreements (PPAs) are still a rarity despite the growing popularity of PPAs across the country. In this webinar, participants will learn more about how...

90

Platforms and real options in large-scale engineering systems  

E-Print Network [OSTI]

This thesis introduces a framework and two methodologies that enable engineering management teams to assess the value of real options in programs of large-scale, partially standardized systems implemented a few times over ...

Kalligeros, Konstantinos C., 1976-

2006-01-01T23:59:59.000Z

91

Retroreflective shadowgraph technique for large-scale flow visualization  

E-Print Network [OSTI]

for large-scale flow visualization, the simple shadow- graph can often provide the most robust solution photographed the shadowgram of a blasting-cap ex- plosion outdoors in daylight (see Fig. 6.14a of [1]). One

Settles, Gary S.

92

Surrogate modeling for large-scale black-box systems  

E-Print Network [OSTI]

This research introduces a systematic method to reduce the complexity of large-scale blackbox systems for which the governing equations are unavailable. For such systems, surrogate models are critical for many applications, ...

Liem, Rhea Patricia

2007-01-01T23:59:59.000Z

93

Large-scale simulator for global data infrastructure optimization  

E-Print Network [OSTI]

Companies depend on information systems to control their operations. During the last decade, Information Technology (IT) infrastructures have grown in scale and complexity. Any large company runs many enterprise applications ...

Herrero-López, Sergio

2012-01-01T23:59:59.000Z

94

Chemical engineers design, control and optimize large-scale chemical,  

E-Print Network [OSTI]

, Biochemical, Environmental, Petroleum Engineering and Nantoechnology. CHEMICAL&MATERIALSSCIENCE CHE OVERVIEW of Science 131 units · Chemical Engineering (Petroleum) Bachelor of Science 136 units · Chemical Engineering38 Chemical engineers design, control and optimize large-scale chemical, physicochemical

Rohs, Remo

95

Exploration of large scale manufacturing of polydimethylsiloxane (PDMS) microfluidic devices  

E-Print Network [OSTI]

Discussion of the current manufacturing process of polydimethylsiloxane (PDMS) parts and the emergence of PDMS use in biomedical microfluidic devices addresses the need to develop large scale manufacturing processes for ...

Hum, Philip W. (Philip Wing-Jung)

2006-01-01T23:59:59.000Z

96

Infrastructure for large-scale tests in marine autonomy  

E-Print Network [OSTI]

This thesis focuses on the development of infrastructure for research with large-scale autonomous marine vehicle fleets and the design of sampling trajectories for compressive sensing (CS). The newly developed infrastructure ...

Hummel, Robert A. (Robert Andrew)

2012-01-01T23:59:59.000Z

97

Data mining techniques for large-scale gene expression analysis  

E-Print Network [OSTI]

Modern computational biology is awash in large-scale data mining problems. Several high-throughput technologies have been developed that enable us, with relative ease and little expense, to evaluate the coordinated expression ...

Palmer, Nathan Patrick

2011-01-01T23:59:59.000Z

98

Implementing CHP in Louisiana: A Case Study  

E-Print Network [OSTI]

researching current Federal and Louisiana state policies that regulate the air permitting and utility regulation for CHP systems. After the appropriate air permits and qualification for grid connection are identified, the next step in the process of solving...

Kozman, T. A.; Carriere, J. L.; Lee, J.

99

Streamflow forecasting for large-scale hydrologic systems  

E-Print Network [OSTI]

STREAMFLOW FORECASTING FOR LARGE-SCALE HYDROLOGIC SYSTEMS A Thesis by HAITHAM MUNIR AWWAD Submitted to the Office of Graduate Studies of Texas AkM University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE May... 1991 Major Subject: Civil Engineering STREAMFLOW FORECASTING FOR LARGE-SCALE HYDROLOGIC SYSTEMS A Thesis by HAITHAM MUNIR AWWAD Approved as to style and content by: uan B. Valdes (Chair of Committee) alph A. Wurbs (Member) Marshall J. Mc...

Awwad, Haitham Munir

1991-01-01T23:59:59.000Z

100

Large Scale Deployment of Renewables for Electricity Generation  

E-Print Network [OSTI]

).38 The small scale of renewable energy projects multiplies the relative costs incurred through multiple administrative processes. For example, biogas plants in Germany require several parallel permit processes designed to address issues such as EU... -cellulose material. Anaerobic digestion or gasification of biomass produces gas that can be used in similar applications to natural gas. Small-scale biogas production is now a well-established technology and large-scale application is in the advanced stages...

Neuhoff, Karsten

2006-03-14T23:59:59.000Z

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Lessons from Large-Scale Renewable Energy Integration Studies: Preprint  

SciTech Connect (OSTI)

In general, large-scale integration studies in Europe and the United States find that high penetrations of renewable generation are technically feasible with operational changes and increased access to transmission. This paper describes other key findings such as the need for fast markets, large balancing areas, system flexibility, and the use of advanced forecasting.

Bird, L.; Milligan, M.

2012-06-01T23:59:59.000Z

102

Prototype Vector Machine for Large Scale Semi-Supervised Learning  

SciTech Connect (OSTI)

Practicaldataminingrarelyfalls exactlyinto the supervisedlearning scenario. Rather, the growing amount of unlabeled data poses a big challenge to large-scale semi-supervised learning (SSL). We note that the computationalintensivenessofgraph-based SSLarises largely from the manifold or graph regularization, which in turn lead to large models that are dificult to handle. To alleviate this, we proposed the prototype vector machine (PVM), a highlyscalable,graph-based algorithm for large-scale SSL. Our key innovation is the use of"prototypes vectors" for effcient approximation on both the graph-based regularizer and model representation. The choice of prototypes are grounded upon two important criteria: they not only perform effective low-rank approximation of the kernel matrix, but also span a model suffering the minimum information loss compared with the complete model. We demonstrate encouraging performance and appealing scaling properties of the PVM on a number of machine learning benchmark data sets.

Zhang, Kai; Kwok, James T.; Parvin, Bahram

2009-04-29T23:59:59.000Z

103

Toward Improved Support for Loosely Coupled Large Scale Simulation Workflows  

SciTech Connect (OSTI)

High-performance computing (HPC) workloads are increasingly leveraging loosely coupled large scale simula- tions. Unfortunately, most large-scale HPC platforms, including Cray/ALPS environments, are designed for the execution of long-running jobs based on coarse-grained launch capabilities (e.g., one MPI rank per core on all allocated compute nodes). This assumption limits capability-class workload campaigns that require large numbers of discrete or loosely coupled simulations, and where time-to-solution is an untenable pacing issue. This paper describes the challenges related to the support of fine-grained launch capabilities that are necessary for the execution of loosely coupled large scale simulations on Cray/ALPS platforms. More precisely, we present the details of an enhanced runtime system to support this use case, and report on initial results from early testing on systems at Oak Ridge National Laboratory.

Boehm, Swen [ORNL] [ORNL; Elwasif, Wael R [ORNL] [ORNL; Naughton, III, Thomas J [ORNL; Vallee, Geoffroy R [ORNL] [ORNL

2014-01-01T23:59:59.000Z

104

Research, Development and Demonstration of Micro-CHP Systems for Residential Applications - Phase I  

SciTech Connect (OSTI)

The objective of the Micro-CHP Phase I effort was to develop a conceptual design for a Micro-CHP system including: Defining market potential; Assessing proposed technology; Developing a proof-of-principle design; and Developing a commercialization strategy. TIAX LLC assembled a team to develop a Micro-CHP system that will provide electricity and heating. TIAX, the contractor and major cost-share provider, provided proven expertise in project management, prime-mover design and development, appliance development and commercialization, analysis of residential energy loads, technology assessment, and market analysis. Kohler Company, the manufacturing partner, is a highly regarded manufacturer of standby power systems and other residential products. Kohler provides a compellingly strong brand, along with the capabilities in product development, design, manufacture, distribution, sales, support, service, and marketing that only a manufacturer of Kohler's status can provide. GAMA, an association of appliance and equipment manufacturers, provided a critical understanding of appliance commercialization issues, including regulatory requirements, large-scale market acceptance issues, and commercialization strategies. The Propane Education & Research Council, a cost-share partner, provided cost share and aided in ensuring the fuel flexibility of the conceptual design. Micro-CHP systems being commercialized in Europe and Japan are generally designed to follow the household thermal load, and generate electricity opportunistically. In many cases, any excess electricity can be sold back to the grid (net metering). These products, however, are unlikely to meet the demands of the U.S. market. First, these products generally cannot provide emergency power when grid power is lost--a critical feature to market success in the U.S. Even those that can may have insufficient electric generation capacities to meet emergency needs for many U.S. homes. Second, the extent to which net metering will be available in the U.S. is unclear. Third, these products are typically not designed for use in households having forced hot-air heating, which is the dominant heating system in the U.S. The U.S. market will also require a major manufacturer that has the reputation and brand recognition, low-cost manufacturing capability, distribution, sales, and service infrastructure, and marketing power to achieve significant market size with a previously unknown and unproven product. History has proven time and time again that small-to-medium-size manufacturers do not have the resources and capabilities to achieve significant markets with such products. During the Phase I effort, the Team developed a conceptual design for a Micro-CHP system that addresses key DOE and U.S. market needs: (1) Provides emergency power adequate for critical household loads, with none of the key drawbacks associated with typical, low-cost emergency generators, such as liquid fuel storage, inability to power ''hard-wired'' loads, need to run temporary extension cords for plug loads, manual set up required, susceptibility to overload, and risk of failure due to lack of maintenance and infrequent operation; (2) Requires no special skills to install--plumbers, electricians and HVAC technicians will typically have all necessary skills; (3) Can be used with the major residential fuels in the U.S., including natural gas and propane, and can be easily adapted to fuel oil as well as emerging fuels as they become available; and (4) Significantly reduces household energy consumption and energy costs.

Robert A. Zogg

2011-03-14T23:59:59.000Z

105

The Phoenix series large scale LNG pool fire experiments.  

SciTech Connect (OSTI)

The increasing demand for natural gas could increase the number and frequency of Liquefied Natural Gas (LNG) tanker deliveries to ports across the United States. Because of the increasing number of shipments and the number of possible new facilities, concerns about the potential safety of the public and property from an accidental, and even more importantly intentional spills, have increased. While improvements have been made over the past decade in assessing hazards from LNG spills, the existing experimental data is much smaller in size and scale than many postulated large accidental and intentional spills. Since the physics and hazards from a fire change with fire size, there are concerns about the adequacy of current hazard prediction techniques for large LNG spills and fires. To address these concerns, Congress funded the Department of Energy (DOE) in 2008 to conduct a series of laboratory and large-scale LNG pool fire experiments at Sandia National Laboratories (Sandia) in Albuquerque, New Mexico. This report presents the test data and results of both sets of fire experiments. A series of five reduced-scale (gas burner) tests (yielding 27 sets of data) were conducted in 2007 and 2008 at Sandia's Thermal Test Complex (TTC) to assess flame height to fire diameter ratios as a function of nondimensional heat release rates for extrapolation to large-scale LNG fires. The large-scale LNG pool fire experiments were conducted in a 120 m diameter pond specially designed and constructed in Sandia's Area III large-scale test complex. Two fire tests of LNG spills of 21 and 81 m in diameter were conducted in 2009 to improve the understanding of flame height, smoke production, and burn rate and therefore the physics and hazards of large LNG spills and fires.

Simpson, Richard B.; Jensen, Richard Pearson; Demosthenous, Byron; Luketa, Anay Josephine; Ricks, Allen Joseph; Hightower, Marion Michael; Blanchat, Thomas K.; Helmick, Paul H.; Tieszen, Sheldon Robert; Deola, Regina Anne; Mercier, Jeffrey Alan; Suo-Anttila, Jill Marie; Miller, Timothy J.

2010-12-01T23:59:59.000Z

106

ITP Distributed Energy: The Market for CHP in Florida, August...  

Broader source: Energy.gov (indexed) [DOE]

Current US CHP Capacity Looks Impressive 0 10 20 30 40 50 60 70 80 90 100 EU 25 USA Russia China Japan India Canada Netherlands UK Finland France Denmark WADE 2006 CHP Capacity,...

107

Obstacles and Opportunity: Overcoming Barriers in Today's CHP Marketplace  

E-Print Network [OSTI]

Combined heat and power (CHP), which can offer tremendous efficiency benefits to industrial facilities around the country, continues to be viewed as a long-term efficiency opportunity. However, the high up-front cost of CHP equipment and fuel...

Chittum, A.; Kaufman, N.

2011-01-01T23:59:59.000Z

108

Large-scale simulations of complex physical systems  

SciTech Connect (OSTI)

Scientific computing has become a tool as vital as experimentation and theory for dealing with scientific challenges of the twenty-first century. Large scale simulations and modelling serve as heuristic tools in a broad problem-solving process. High-performance computing facilities make possible the first step in this process - a view of new and previously inaccessible domains in science and the building up of intuition regarding the new phenomenology. The final goal of this process is to translate this newly found intuition into better algorithms and new analytical results.In this presentation we give an outline of the research themes pursued at the Scientific Computing Laboratory of the Institute of Physics in Belgrade regarding large-scale simulations of complex classical and quantum physical systems, and present recent results obtained in the large-scale simulations of granular materials and path integrals.

Belic, A. [Scientific Computing Laboratory, Institute of Physics, Pregrevica 118, 11080 Belgrade (Serbia and Montenegro)

2007-04-23T23:59:59.000Z

109

On Local and Global Centrality in Large Scale Networks  

E-Print Network [OSTI]

Estimating influential nodes in large scale networks including but not limited to social networks, biological networks, communication networks, emerging smart grids etc. is a topic of fundamental interest. To understand influences of nodes in a network, a classical metric is centrality within which there are multiple specific instances including degree centrality, closeness centrality, betweenness centrality and more. As of today, existing algorithms to identify nodes with high centrality measures operate upon the entire (or rather global) network, resulting in high computational complexity. In this paper, we design efficient algorithms for determining the betweenness centrality in large scale networks by taking advantage of the modular topology exhibited by most of these large scale networks. Very briefly, modular topologies are those wherein the entire network appears partitioned into distinct modules (or clusters or communities), wherein nodes within the module (that likely share highly similar profiles) h...

Das, Sima

2014-01-01T23:59:59.000Z

110

Scaling self-organizing maps to model large cortical networks  

E-Print Network [OSTI]

Self-organizing computational models with specific intracortical connections can explain many functional features of visual cortex, such as topographic orientation and ocular dominance maps. However, due to their computational requirements, it is difficult to use such detailed models to study large-scale phenomena like object segmentation and binding, object recognition, tilt illusions, optic flow, and fovea periphery interaction. This paper introduces two techniques that make large simulations practical. First, a set of general linear scaling equations for the RF-LISSOM self-organizing model is derived and shown to result in quantitatively equivalent maps over a wide range of simulation sizes. This capability makes it possible to debug small simulations and then scale them up to larger simulations only when needed. The scaling equations also facilitate the comparison of biological maps and parameters between individuals and species with different brain region sizes. Second, the equations are combined into a new growing map method called GLISSOM, which dramatically reduces the memory and computational requirements of large self-organizing networks. With GLISSOM it should be possible to simulate all of human V1 at the single-column level using existing supercomputers, making detailed computational study of large-scale phenomena possible.

2004-01-01T23:59:59.000Z

111

Combined Heat and Power Systems (CHP): Capabilities (Fact Sheet)  

SciTech Connect (OSTI)

D&MT Capabilities fact sheet that describes the NREL capabilities related to combined heat and power (CHP).

Not Available

2013-07-01T23:59:59.000Z

112

Large-scale anisotropy in stably stratified rotating flows  

SciTech Connect (OSTI)

We present results from direct numerical simulations of the Boussinesq equations in the presence of rotation and/or stratification, both in the vertical direction. The runs are forced isotropically and randomly at small scales and have spatial resolutions of up to $1024^3$ grid points and Reynolds numbers of $\\approx 1000$. We first show that solutions with negative energy flux and inverse cascades develop in rotating turbulence, whether or not stratification is present. However, the purely stratified case is characterized instead by an early-time, highly anisotropic transfer to large scales with almost zero net isotropic energy flux. This is consistent with previous studies that observed the development of vertically sheared horizontal winds, although only at substantially later times. However, and unlike previous works, when sufficient scale separation is allowed between the forcing scale and the domain size, the total energy displays a perpendicular (horizontal) spectrum with power law behavior compatible with $\\sim k_\\perp^{-5/3}$, including in the absence of rotation. In this latter purely stratified case, such a spectrum is the result of a direct cascade of the energy contained in the large-scale horizontal wind, as is evidenced by a strong positive flux of energy in the parallel direction at all scales including the largest resolved scales.

Marino, Dr. Raffaele [National Center for Atmospheric Research (NCAR); Mininni, Dr. Pablo D. [Universidad de Buenos Aires, Argentina; Rosenberg, Duane L [ORNL; Pouquet, Dr. Annick [National Center for Atmospheric Research (NCAR)

2014-01-01T23:59:59.000Z

113

Suppression of large-scale perturbations by stiff solid  

E-Print Network [OSTI]

Evolution of large-scale scalar perturbations in the presence of stiff solid (solid with pressure to energy density ratio > 1/3) is studied. If the solid dominated the dynamics of the universe long enough, the perturbations could end up suppressed by as much as several orders of magnitude. To avoid too steep large-angle power spectrum of CMB, radiation must have prevailed over the solid long enough before recombination.

Vladimír Balek; Matej Škovran

2015-01-28T23:59:59.000Z

114

Suppression of large-scale perturbations by stiff solid  

E-Print Network [OSTI]

Evolution of large-scale scalar perturbations in the presence of stiff solid (solid with pressure to energy density ratio > 1/3) is studied. If the solid dominated the dynamics of the universe long enough, the perturbations could end up suppressed by as much as several orders of magnitude. To avoid too steep large-angle power spectrum of CMB, radiation must have prevailed over the solid long enough before recombination.

Balek, Vladimír

2015-01-01T23:59:59.000Z

115

Biomass DHP/ CHP benefits at local and regional level  

E-Print Network [OSTI]

Biomass DHP/ CHP ­ benefits at local and regional level Krzysztof Gierulski EC Baltic RenewableEnergy Workshop, Brussels 01.07.2002 #12;Biomass DHP/ CHP in Poland n Plan of the presentation n Promotion and dissemination of best practices (,,Promotion of conversion to biomass CHP at larger sites in PL", OPET) n

116

Integrating Renewables and CHP into the UK Electricity System  

E-Print Network [OSTI]

Integrating Renewables and CHP into the UK Electricity System Xueguang Wu, Nick Jenkins, Goran Report 13 #12;1 Integrating Renewables and CHP into the UK Electricity System Tyndall Centre Technical and Regional CHP Projections to 2010 ...............................................18 2.5 Scenarios

Watson, Andrew

117

Designing and control of a SOFC micro-CHP system  

E-Print Network [OSTI]

Designing and control of a SOFC micro-CHP system Vincenzo Liso Dissertation submitted 201X #12;Designing and control of a SOFC micro-CHP system Vincenzo Liso c Printed in Denmark by Uni my family #12;ii #12;Abstract Vincenzo Liso April 17-- 2012 Designing and control of a SOFC micro-CHP

Liso, Vincenzo

118

Molecular Cell High-Affinity Binding of Chp1 Chromodomain  

E-Print Network [OSTI]

Molecular Cell Article High-Affinity Binding of Chp1 Chromodomain to K9 Methylated Histone H3, Chp1, and siRNAs derived from centro- meric repeats. Recruitment of RITS to centromeres has been establishment. Our crystal structure of Chp1's chromodomain in complex with a trimethylated lysine 9 H3 peptide

Halazonetis, Thanos

119

Renewables and CHP Deployment in the UK January 2002  

E-Print Network [OSTI]

Renewables and CHP Deployment in the UK to 2020 Jim Watson January 2002 Tyndall Centre for Climate Change Research Working Paper 21 #12;Renewables and CHP Deployment in the UK to 2020 Jim Watson Energy....................................................................................................6 3. The Deployment of Renewables and CHP to 2020

Watson, Andrew

120

Design and Control of Household CHP Fuel Cell System  

E-Print Network [OSTI]

Design and Control of Household CHP Fuel Cell System PhD. project Dissertation Anders Risum and Control of Household CHP Fuel Cell System" Anders R. Korsgaard, M.Sc. Mechanical Engineering, e-mail: ark for micro combined heat and power (CHP) systems for local households. Several components in the PEM fuel

Berning, Torsten

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Evolving Large Scale UAV Communication System Adrian Agogino  

E-Print Network [OSTI]

Evolving Large Scale UAV Communication System Adrian Agogino UCSC at NASA Ames Mail Stop 269 Corvallis, OR 97331 Kagan.Tumer@ oregonstate.edu ABSTRACT Unmanned Aerial Vehicles (UAVs) have traditionally powered unmanned aerial vehicles (UAVs) to fly long term missions at high altitudes. This will revo

Tumer, Kagan

122

Spatial Energy Balancing in Large-scale Wireless Multihop Networks  

E-Print Network [OSTI]

Spatial Energy Balancing in Large-scale Wireless Multihop Networks Seung Jun Baek and Gustavo de is on optimizing trade-offs between the energy cost of spreading traffic and the improved spatial balance of energy. We propose a parameterized family of energy balancing strategies for grids and approximate

de Veciana, Gustavo

123

Parallel Stochastic Gradient Algorithms for Large-Scale Matrix ...  

E-Print Network [OSTI]

On large-scale matrix completion tasks, Jellyfish is orders of magnitude more efficient than ...... NNLS was written in Matlab, and some of the functions are available .... Figure 6: Low-Rank Factorization Graph on (A) Movielens1M and (B)

2013-03-21T23:59:59.000Z

124

Valueadded Mediation in LargeScale Information Systems  

E-Print Network [OSTI]

workflow, and help desks [WiederholdCC:1994]. Other services available over networks include textual, mediating services can be performed by independent entrepreneurs. 1 INTRODUCTION As information systemsValue­added Mediation in Large­Scale Information Systems Gio Wiederhold Computer Science Department

Wiederhold, Gio

125

Large Scale Mining of Molecular Fragments with Wildcards  

E-Print Network [OSTI]

Large Scale Mining of Molecular Fragments with Wildcards Heiko Hofer1 , Christian Borgelt2 a novel molecule will be active or inactive, so that future chemical tests can be focused on the most molecular fragments to discriminate between active and inactive molecules. In this paper we present two

Borgelt, Christian

126

Computer Science Colloquium Designing a Large-Scale Quantum Architecture  

E-Print Network [OSTI]

Computer Science Colloquium Designing a Large-Scale Quantum Architecture Speaker: Tzvetan Metodi of traditional architectures, to develop a model for a computationally relevant quantum system that provides on the development of balanced architectural models of organization and specialization for emerging quantum computing

127

ORNL 2013-G00021/tcc Large Scale Graphene Production  

E-Print Network [OSTI]

ORNL 2013-G00021/tcc 02.2013 Large Scale Graphene Production UT-B ID 201102606 Technology Summary Graphene is an emerging one-atom-thick carbon material which has the potential for a wide range research, graphene has quickly attained the status of a wonder nanomaterial and continued to draw

128

Materialized community ground models for large-scale earthquake simulation  

E-Print Network [OSTI]

Materialized community ground models for large-scale earthquake simulation Steven W. Schlosser to ground motion sim- ulations, in which ground model datasets are fully materi- alized into octress stored as a service techniques in which scientific computation and storage services become more tightly intertwined. 1

Shewchuk, Jonathan

129

Developing A Grid Portal For Large-scale Reservoir Studies  

E-Print Network [OSTI]

Developing A Grid Portal For Large-scale Reservoir Studies 1 Center for Computation & Technology 2 uncertainty. · Advantages of grid technology · Proposed Solution of the UCoMS Team · What is a Portal? · UCo of reservoir uncertainty... Petroleum drilling consist of many uncertainties. Main objective is to optimize

Allen, Gabrielle

130

Large Scale Simulation of Tor: Modelling a Global Passive Adversary  

E-Print Network [OSTI]

. Implementing global passive adversary attacks on currently deployed low latency anonymous networks designs have been developed which attempt to apply mixes to low latency traffic. The most widelyLarge Scale Simulation of Tor: Modelling a Global Passive Adversary Gavin O' Gorman and Stephen

Blott, Stephen

131

Seamlessly Integrating Software & Hardware Modelling for Large-Scale Systems  

E-Print Network [OSTI]

Engineering, with the math- ematical modelling approach, Modelica, to address the software/hardware integration problem. The environment and hardware components are modelled in Modelica and integrated software-hardware codesign, large-scale sys- tems, Behavior Engineering, Modelica. 1. Introduction

Zhao, Yuxiao

132

Chemical engineers design, control and optimize large-scale chemical,  

E-Print Network [OSTI]

Emphasis in Nanotechnology · ChemicalEngineering Emphasis in Petroleum Engineering · ChemicalEngineering38 Chemical engineers design, control and optimize large-scale chemical, physicochemical and electronics fields. Chemical Engineers are employed in areas as diverse as the chemical, materials, energy

Rohs, Remo

133

Chemical engineers design, control and optimize large-scale chemical,  

E-Print Network [OSTI]

· ChemicalEngineering (Nanotechnology) Bachelor of Science 131 units · ChemicalEngineering(Petroleum38 Chemical engineers design, control and optimize large-scale chemical, physicochemical and electronics fields. Chemical Engineers are employed in areas as diverse as the chemical, pharmaceutical

Rohs, Remo

134

Chemical engineers design, control and optimize large-scale chemical,  

E-Print Network [OSTI]

in Nanotechnology · ChemicalEngineering Emphasis in Petroleum Engineering · ChemicalEngineering Emphasis in Polymers38 Chemical engineers design, control and optimize large-scale chemical, physicochemical and electronics fields. Chemical Engineers are employed in areas as diverse as the chemical, pharmaceutical

Rohs, Remo

135

Achieving centimetre-scale supercollimation in a large-area  

E-Print Network [OSTI]

demonstrations, and is an important enabling step towards the creation of high-density and low-cost optical unexpected but inherent robustness with respect to short-scale disorder such as fabrication roughness-cladding. A scanning electron micrograph of the large-area PhC possessing about 109 lattice points, fabricated through

Soljaèiæ, Marin

136

Performance Health Monitoring of Large-Scale Systems  

SciTech Connect (OSTI)

This report details the progress made on the ASCR funded project Performance Health Monitoring for Large Scale Systems. A large-­?scale application may not achieve its full performance potential due to degraded performance of even a single subsystem. Detecting performance faults, isolating them, and taking remedial action is critical for the scale of systems on the horizon. PHM aims to develop techniques and tools that can be used to identify and mitigate such performance problems. We accomplish this through two main aspects. The PHM framework encompasses diagnostics, system monitoring, fault isolation, and performance evaluation capabilities that indicates when a performance fault has been detected, either due to an anomaly present in the system itself or due to contention for shared resources between concurrently executing jobs. Software components called the PHM Control system then build upon the capabilities provided by the PHM framework to mitigate degradation caused by performance problems.

Rajamony, Ram

2014-11-20T23:59:59.000Z

137

Large scale anisotropic bias from primordial non-Gaussianity  

SciTech Connect (OSTI)

In this work we study the large scale structure bias in models of anisotropic inflation. We use the Peak Background Splitting method in Excursion Set Theory to find the scale-dependent bias. We show that the amplitude of the bias is modified by a direction-dependent factor. In the specific anisotropic inflation model which we study, the scale-dependent bias vanishes at leading order when the long wavelength mode in squeezed limit is aligned with the anisotropic direction in the sky. We also extend the scale-dependent bias formulation to the general situations with primordial anisotropy. We find some selection rules indicating that some specific parts of a generic anisotropic bispectrum is picked up by the bias parameter. We argue that the anisotropic bias is mainly sourced by the angle between the anisotropic direction and the long wavelength mode in the squeezed limit.

Baghram, Shant; Firouzjahi, Hassan [School of Astronomy, Institute for Research in Fundamental Sciences (IPM), P.O. Box 19395-5531, Tehran (Iran, Islamic Republic of); Namjoo, Mohammad Hossein, E-mail: baghram@ipm.ir, E-mail: mh.namjoo@ipm.ir, E-mail: firouz@ipm.ir [School of Physics, Institute for Research in Fundamental Sciences (IPM), P.O. Box 19395-5531, Tehran (Iran, Islamic Republic of)

2013-08-01T23:59:59.000Z

138

Quantum noise in large-scale coherent nonlinear photonic circuits  

E-Print Network [OSTI]

A semiclassical simulation approach is presented for studying quantum noise in large-scale photonic circuits incorporating an ideal Kerr nonlinearity. A circuit solver is used to generate matrices defining a set of stochastic differential equations, in which the resonator field variables represent random samplings of the Wigner quasi-probability distributions. Although the semiclassical approach involves making a large-photon-number approximation, tests on one- and two-resonator circuits indicate satisfactory agreement between the semiclassical and full-quantum simulation results in the parameter regime of interest. The semiclassical model is used to simulate random errors in a large-scale circuit that contains 88 resonators and hundreds of components in total, and functions as a 4-bit ripple counter. The error rate as a function of on-state photon number is examined, and it is observed that the quantum fluctuation amplitudes do not increase as signals propagate through the circuit, an important property for scalability.

Charles Santori; Jason S. Pelc; Raymond G. Beausoleil; Nikolas Tezak; Ryan Hamerly; Hideo Mabuchi

2014-05-27T23:59:59.000Z

139

Geospatial Optimization of Siting Large-Scale Solar Projects  

SciTech Connect (OSTI)

Recent policy and economic conditions have encouraged a renewed interest in developing large-scale solar projects in the U.S. Southwest. However, siting large-scale solar projects is complex. In addition to the quality of the solar resource, solar developers must take into consideration many environmental, social, and economic factors when evaluating a potential site. This report describes a proof-of-concept, Web-based Geographical Information Systems (GIS) tool that evaluates multiple user-defined criteria in an optimization algorithm to inform discussions and decisions regarding the locations of utility-scale solar projects. Existing siting recommendations for large-scale solar projects from governmental and non-governmental organizations are not consistent with each other, are often not transparent in methods, and do not take into consideration the differing priorities of stakeholders. The siting assistance GIS tool we have developed improves upon the existing siting guidelines by being user-driven, transparent, interactive, capable of incorporating multiple criteria, and flexible. This work provides the foundation for a dynamic siting assistance tool that can greatly facilitate siting decisions among multiple stakeholders.

Macknick, J.; Quinby, T.; Caulfield, E.; Gerritsen, M.; Diffendorfer, J.; Haines, S.

2014-03-01T23:59:59.000Z

140

Primordial quantum nonequilibrium and large-scale cosmic anomalies  

E-Print Network [OSTI]

We study incomplete relaxation to quantum equilibrium at long wavelengths, during a pre-inflationary phase, as a possible explanation for the reported large-scale anomalies in the cosmic microwave background (CMB). Our scenario makes use of the de Broglie-Bohm pilot-wave formulation of quantum theory, in which the Born probability rule has a dynamical origin. The large-scale power deficit could arise from incomplete relaxation for the amplitudes of the primordial perturbations. We show, by numerical simulations for a spectator scalar field, that if the pre-inflationary era is radiation dominated then the deficit in the emerging power spectrum will have a characteristic shape (an inverse-tangent dependence on wavenumber k, with oscillations). It is found that our scenario is able to produce a power deficit in the observed region and of the observed (approximate) magnitude for an appropriate choice of cosmological parameters. We also discuss the large-scale anisotropy, which could arise from incomplete relaxation for the phases of the primordial perturbations. We present numerical simulations for phase relaxation, and we show how to define characteristic scales for amplitude and phase nonequilibrium. The extent to which the data might support our scenario is left as a question for future work. Our results suggest that we have a potentially viable model that might explain two apparently independent cosmic anomalies by means of a single mechanism.

Samuel Colin; Antony Valentini

2014-07-31T23:59:59.000Z

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Microwave backgropund anisotropies, large-scale structure and cosmological parameters  

E-Print Network [OSTI]

We review how the various large-scale data constrain cosmological parameters and, consequently, theories for the origin of large-scale structure in the Universe. We discuss the form of the power spectrum implied by the correlation data of galaxies and argue by comparing the velocity field implied by the distribution of light with the observed velocity flows that the bias parameter, $b$, is likely to be constant in the linear regime. This then allows one to estimate the density parameter, $\\Omega$, and $b$ directly from the \\underline{data} on $\\xi(r)$ and the velocity fields. We show that it is consistent with low values of $\\Omega^{0.6}/b$. We discuss the ways to normalise the optical data at $z\\sim0$ directly to the COBE (or other microwave background) data. The data on high-$z$ \\underline{galaxies} allows one to further constrain the shape of the \\underline{primordial} power spectrum at scales which are non-linear today ($< 8h^{-1}$Mpc) and we discuss the consistency of the data with inflationary models normalised to the large-scale structure observations.

A. Kashlinsky

1993-11-18T23:59:59.000Z

142

Large scale EPR correlations and cosmic gravitational waves  

E-Print Network [OSTI]

We study how quantum correlations survive at large scales in spite of their exposition to stochastic backgrounds of gravitational waves. We consider Einstein-Podolski-Rosen (EPR) correlations built up on the polarizations of photon pairs and evaluate how they are affected by the cosmic gravitational wave background (CGWB). We evaluate the quantum decoherence of the EPR correlations in terms of a reduction of the violation of the Bell inequality as written by Clauser, Horne, Shimony and Holt (CHSH). We show that this decoherence remains small and that EPR correlations can in principle survive up to the largest cosmic scales.

B. Lamine; R. Hervé; M. -T. Jaekel; A. Lambrecht; S. Reynaud

2011-05-10T23:59:59.000Z

143

Large-Scale Optimization for Bayesian Inference in Complex Systems  

SciTech Connect (OSTI)

The SAGUARO (Scalable Algorithms for Groundwater Uncertainty Analysis and Robust Optimization) Project focused on the development of scalable numerical algorithms for large-scale Bayesian inversion in complex systems that capitalize on advances in large-scale simulation-based optimization and inversion methods. The project was a collaborative effort among MIT, the University of Texas at Austin, Georgia Institute of Technology, and Sandia National Laboratories. The research was directed in three complementary areas: efficient approximations of the Hessian operator, reductions in complexity of forward simulations via stochastic spectral approximations and model reduction, and employing large-scale optimization concepts to accelerate sampling. The MIT--Sandia component of the SAGUARO Project addressed the intractability of conventional sampling methods for large-scale statistical inverse problems by devising reduced-order models that are faithful to the full-order model over a wide range of parameter values; sampling then employs the reduced model rather than the full model, resulting in very large computational savings. Results indicate little effect on the computed posterior distribution. On the other hand, in the Texas--Georgia Tech component of the project, we retain the full-order model, but exploit inverse problem structure (adjoint-based gradients and partial Hessian information of the parameter-to-observation map) to implicitly extract lower dimensional information on the posterior distribution; this greatly speeds up sampling methods, so that fewer sampling points are needed. We can think of these two approaches as ``reduce then sample'' and ``sample then reduce.'' In fact, these two approaches are complementary, and can be used in conjunction with each other. Moreover, they both exploit deterministic inverse problem structure, in the form of adjoint-based gradient and Hessian information of the underlying parameter-to-observation map, to achieve their speedups.

Willcox, Karen [MIT] [MIT; Marzouk, Youssef [MIT] [MIT

2013-11-12T23:59:59.000Z

144

Generation of large-scale winds in horizontally anisotropic convection  

E-Print Network [OSTI]

We simulate three-dimensional, horizontally periodic Rayleigh-B\\'enard convection between free-slip horizontal plates, rotating about a horizontal axis. When both the temperature difference between the plates and the rotation rate are sufficiently large, a strong horizontal wind is generated that is perpendicular to both the rotation vector and the gravity vector. The wind is turbulent, large-scale, and vertically sheared. Horizontal anisotropy, engendered here by rotation, appears necessary for such wind generation. Most of the kinetic energy of the flow resides in the wind, and the vertical turbulent heat flux is much lower on average than when there is no wind.

von Hardenberg, J; Provenzale, A; Spiegel, E A

2015-01-01T23:59:59.000Z

145

A first large-scale flood inundation forecasting model  

SciTech Connect (OSTI)

At present continental to global scale flood forecasting focusses on predicting at a point discharge, with little attention to the detail and accuracy of local scale inundation predictions. Yet, inundation is actually the variable of interest and all flood impacts are inherently local in nature. This paper proposes a first large scale flood inundation ensemble forecasting model that uses best available data and modeling approaches in data scarce areas and at continental scales. The model was built for the Lower Zambezi River in southeast Africa to demonstrate current flood inundation forecasting capabilities in large data-scarce regions. The inundation model domain has a surface area of approximately 170k km2. ECMWF meteorological data were used to force the VIC (Variable Infiltration Capacity) macro-scale hydrological model which simulated and routed daily flows to the input boundary locations of the 2-D hydrodynamic model. Efficient hydrodynamic modeling over large areas still requires model grid resolutions that are typically larger than the width of many river channels that play a key a role in flood wave propagation. We therefore employed a novel sub-grid channel scheme to describe the river network in detail whilst at the same time representing the floodplain at an appropriate and efficient scale. The modeling system was first calibrated using water levels on the main channel from the ICESat (Ice, Cloud, and land Elevation Satellite) laser altimeter and then applied to predict the February 2007 Mozambique floods. Model evaluation showed that simulated flood edge cells were within a distance of about 1 km (one model resolution) compared to an observed flood edge of the event. Our study highlights that physically plausible parameter values and satisfactory performance can be achieved at spatial scales ranging from tens to several hundreds of thousands of km2 and at model grid resolutions up to several km2. However, initial model test runs in forecast mode revealed that it is crucial to account for basin-wide hydrological response time when assessing lead time performances notwithstanding structural limitations in the hydrological model and possibly large inaccuracies in precipitation data.

Schumann, Guy J-P; Neal, Jeffrey C.; Voisin, Nathalie; Andreadis, Konstantinos M.; Pappenberger, Florian; Phanthuwongpakdee, Kay; Hall, Amanda C.; Bates, Paul D.

2013-11-04T23:59:59.000Z

146

Diffuse Gamma-Ray Emission from Large Scale Structures  

E-Print Network [OSTI]

For more than a decade now the complete origin of the diffuse gamma-ray emission background (EGRB) has been unknown. Major components like unresolved star-forming galaxies (making 10GeV. Moreover, we show that, even though the gamma-ray emission arising from structure formation shocks at galaxy clusters is below previous estimates, these large scale shocks can still give an important, and even dominant at high energies, contribution to the EGRB. Future detections of cluster gamma-ray emission would make our upper limit of the extragalactic gamma-ray emission from structure-formation process, a firm prediction, and give us deeper insight in evolution of these large scale shock.

Dobardzic, Aleksandra

2012-01-01T23:59:59.000Z

147

Sustaining Operational Efficiency of a CHP System  

SciTech Connect (OSTI)

This chapter provides background information on why sustaining operations of combined cooling, heating and power systems is important, provides the algorithms for CHP system performance monitoring and commissioning verification, and concludes with a discussion on how these algorithms can be deployed.

Katipamula, Srinivas; Brambley, Michael R.

2010-01-04T23:59:59.000Z

148

Skewness and Kurtosis in Large-Scale Cosmic Fields  

E-Print Network [OSTI]

In this paper, I present the calculation of the third and fourth moments of both the distribution function of the large--scale density and the large--scale divergence of the velocity field, $\\theta$. These calculations are made by the mean of perturbative calculations assuming Gaussian initial conditions and are expected to be valid in the linear or quasi linear regime. The moments are derived for a top--hat window function and for any cosmological parameters $\\Omega$ and $\\Lambda$. It turns out that the dependence with $\\Lambda$ is always very weak whereas the moments of the distribution function of the divergence are strongly dependent on $\\Omega$. A method to measure $\\Omega$ using the skewness of this field has already been presented by Bernardeau et al. (1993). I show here that the simultaneous measurement of the skewness and the kurtosis allows to test the validity of the gravitational instability scenario hypothesis. Indeed there is a combination of the first three moments of $\\theta$ that is almost independent of the cosmological parameters $\\Omega$ and $\\Lambda$, $${(-3^2) \\over ^2}\\approx 1.5,$$ (the value quoted is valid when the index of the power spectrum at the filtering scale is close to -1) so that any cosmic velocity field created by gravitational instabilities should verify such a property.

F. Bernardeau

1993-12-13T23:59:59.000Z

149

Just enough inflation: power spectrum modifications at large scales  

E-Print Network [OSTI]

We show that models of `just enough' inflation, where the slow-roll evolution lasted only $50-60$ e-foldings, feature modifications of the CMB power spectrum at large angular scales. We perform a systematic and model-independent analysis of any possible non-slow-roll background evolution prior to the final stage of slow-roll inflation. We find a high degree of universality since most common backgrounds like fast-roll evolution, matter or radiation-dominance give rise to a power loss at large angular scales and a peak together with an oscillatory behaviour at scales around the value of the Hubble parameter at the beginning of slow-roll inflation. Depending on the value of the equation of state parameter, different pre-inflationary epochs lead instead to an enhancement of power at low-$\\ell$, and so seem disfavoured by recent observational hints for a lack of CMB power at $\\ell\\lesssim 40$. We also comment on the importance of initial conditions and the possibility to have multiple pre-inflationary stages.

Michele Cicoli; Sean Downes; Bhaskar Dutta; Francisco G. Pedro; Alexander Westphal

2014-07-03T23:59:59.000Z

150

Large Scale Structure in the Sloan Digital Sky Survey  

E-Print Network [OSTI]

The primary observational goals of the Sloan Digital Sky Survey are to obtain CCD imaging of 10,000 deg^2 of the north Galactic cap in five passbands, with a limiting magnitude in the r-band of 22.5, to obtain spectroscopic redshifts of 10^6 galaxies and 10^5 quasars, and to obtain similar data for three ~ 200 deg^2 stripes in the south Galactic cap, with repeated imaging to allow co-addition and variability studies in at least one of these stripes. The resulting photometric and spectroscopic galaxy datasets allow one to map the large scale structure traced by optical galaxies over a wide range of scales to unprecedented precision. Results relevant to the large scale structure of our Universe include: a flat model with a cosmological constant Omega_Lambda=0.7 provides a good description of the data; the galaxy-galaxy correlation function shows departures from a power law which are statistically significant; and galaxy clustering is a strong function of galaxy type.

M. Bernardi

2003-03-07T23:59:59.000Z

151

Fractal Approach to Large-Scale Galaxy Distribution  

E-Print Network [OSTI]

We present a review of the history and the present state of the fractal approach to the large-scale distribution of galaxies. Angular correlation function was used as a general instrument for the structure analysis. It was realized later that a normalization condition for the reduced correlation function estimator results in distorted values for both R_{hom} and fractal dimension D. Moreover, according to a theorem on projections of fractals, galaxy angular catalogues can not be used for detecting a structure with the fractal dimension D>2. For this 3-d maps are required, and indeed modern extensive redshift-based 3-d maps have revealed the ``hidden'' fractal dimension of about 2, and have confirmed superclustering at scales even up to 500 Mpc (e.g. the Sloan Great Wall). On scales, where the fractal analysis is possible in completely embedded spheres, a power--law density field has been found. The fractal dimension D =2.2 +- 0.2 was directly obtained from 3-d maps and R_{hom} has expanded from 10 Mpc to scales approaching 100 Mpc. In concordance with the 3-d map results, modern all sky galaxy counts in the interval 10^m - 15^m give a 0.44m-law which corresponds to D=2.2 within a radius of 100h^{-1}_{100} Mpc. We emphasize that the fractal mass--radius law of galaxy clustering has become a key phenomenon in observational cosmology.

Yurij Baryshev; Pekka Teerikorpi

2005-05-10T23:59:59.000Z

152

Atypical Behavior Identification in Large Scale Network Traffic  

SciTech Connect (OSTI)

Cyber analysts are faced with the daunting challenge of identifying exploits and threats within potentially billions of daily records of network traffic. Enterprise-wide cyber traffic involves hundreds of millions of distinct IP addresses and results in data sets ranging from terabytes to petabytes of raw data. Creating behavioral models and identifying trends based on those models requires data intensive architectures and techniques that can scale as data volume increases. Analysts need scalable visualization methods that foster interactive exploration of data and enable identification of behavioral anomalies. Developers must carefully consider application design, storage, processing, and display to provide usability and interactivity with large-scale data. We present an application that highlights atypical behavior in enterprise network flow records. This is accomplished by utilizing data intensive architectures to store the data, aggregation techniques to optimize data access, statistical techniques to characterize behavior, and a visual analytic environment to render the behavioral trends, highlight atypical activity, and allow for exploration.

Best, Daniel M.; Hafen, Ryan P.; Olsen, Bryan K.; Pike, William A.

2011-10-23T23:59:59.000Z

153

Laboratory-Specific-Documentation-HHN.docx CHP updated 8/21/13 Virginia Tech  

E-Print Network [OSTI]

Laboratory-Specific-Documentation-HHN.docx CHP updated 8/21/13 Virginia Tech Chemistry Department Chemical Hygiene Plan This CHP applies to rooms Current worker beginning a new task Reviewing a revised edition of the CHP 1

Crawford, T. Daniel

154

Impact of Integrating Renewables and CHP into the UK Transmission Network  

E-Print Network [OSTI]

Impact of Integrating Renewables and CHP into the UK Transmission Network Xueguang Wu, Nick Jenkins of Integrating Renewables and CHP into the UK Transmission Network Xueguang Wu, Nick Jenkins and Goran Strbac ........................................................................................................3 2.2 SCENARIOS FOR CHP

Watson, Andrew

155

Solar cycle variations of large scale flows in the Sun  

E-Print Network [OSTI]

Using data from the Michelson Doppler Imager (MDI) instrument on board the Solar and Heliospheric Observatory (SOHO), we study the large-scale velocity fields in the outer part of the solar convection zone using the ring diagram technique. We use observations from four different times to study possible temporal variations in flow velocity. We find definite changes in both the zonal and meridional components of the flows. The amplitude of the zonal flow appears to increase with solar activity and the flow pattern also shifts towards lower latitude with time.

Sarbani Basu; H. M. Antia

2000-01-17T23:59:59.000Z

156

Large-Scale Anisotropy of EGRET Gamma Ray Sources  

E-Print Network [OSTI]

In the course of its operation, the EGRET experiment detected high-energy gamma ray sources at energies above 100 MeV over the whole sky. In this communication, we search for large-scale anisotropy patterns among the catalogued EGRET sources using an expansion in spherical harmonics, accounting for EGRET's highly non-uniform exposure. We find significant excess in the quadrupole and octopole moments. This is consistent with the hypothesis that, in addition to the galactic plane, a second mid-latitude (5^{\\circ} < |b| < 30^{\\circ}) population, perhaps associated with the Gould belt, contributes to the gamma ray flux above 100 MeV.

Luis Anchordoqui; Thomas McCauley; Thomas Paul; Olaf Reimer; Diego F. Torres

2005-06-24T23:59:59.000Z

157

Robust Morphological Measures for Large-Scale Structure  

E-Print Network [OSTI]

A complete family of statistical descriptors for the morphology of large--scale structure based on Minkowski--Functionals is presented. These robust and significant measures can be used to characterize the local and global morphology of spatial patterns formed by a coverage of point sets which represent galaxy samples. Basic properties of these measures are highlighted and their relation to the `genus statistics' is discussed. Test models like a Poissonian point process and samples generated from a Voronoi--model are put into perspective.

T. Buchert

1994-12-17T23:59:59.000Z

158

Statistical analysis of large-scale structure in the Universe  

E-Print Network [OSTI]

Methods for the statistical characterization of the large-scale structure in the Universe will be the main topic of the present text. The focus is on geometrical methods, mainly Minkowski functionals and the J-function. Their relations to standard methods used in cosmology and spatial statistics and their application to cosmological datasets will be discussed. This work is not only meant as a short review for comologist, but also attempts to illustrate these morphological methods and to make them accessible to scientists from other fields. Consequently, a short introduction to the standard picture of cosmology is given.

Martin Kerscher

1999-12-15T23:59:59.000Z

159

Large-Scale Manufacturing of Nanoparticle-Based Lubrication Additives  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe10 DOEWashington,LM-04-XXXX OfficeLandLarge-Scale Manufacturing

160

Large-Scale Renewable Energy Guide | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe10 DOEWashington,LM-04-XXXX OfficeLandLarge-Scale

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Sun Also Rises: Planning for Large-Scale Solar Power  

SciTech Connect (OSTI)

Wind, solar, and other renewable energy are an important part of any present-day energy. The portion of energy they supply will certainly be increasing over the next few years. Arguably, large-scale wind power has reached technological maturity, and with more than 100 GW of capacity, ample experience exists on integrating wind systems. Solar technologies, on the other hand, are emerging, and substantial R&D investments are being made to achieve parity with retail electricity costs in the near future. As this happens, annual capacity additions of solar power will become significant.

Bebic, J.; Walling, R.; O'Brien, K.; Kroposki, B.

2009-05-01T23:59:59.000Z

162

Large-Scale Spray Releases: Additional Aerosol Test Results  

SciTech Connect (OSTI)

One of the events postulated in the hazard analysis for the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak event involves extrapolating from correlations reported in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids that behave as a Newtonian fluid. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials that will be processed in the WTP and in processing facilities across the DOE complex. To expand the data set upon which the WTP accident and safety analyses were based, an aerosol spray leak testing program was conducted by Pacific Northwest National Laboratory (PNNL). PNNL’s test program addressed two key technical areas to improve the WTP methodology (Larson and Allen 2010). The first technical area was to quantify the role of slurry particles in small breaches where slurry particles may plug the hole and prevent high-pressure sprays. The results from an effort to address this first technical area can be found in Mahoney et al. (2012a). The second technical area was to determine aerosol droplet size distribution and total droplet volume from prototypic breaches and fluids, including sprays from larger breaches and sprays of slurries for which literature data are mostly absent. To address the second technical area, the testing program collected aerosol generation data at two scales, commonly referred to as small-scale and large-scale testing. The small-scale testing and resultant data are described in Mahoney et al. (2012b), and the large-scale testing and resultant data are presented in Schonewill et al. (2012). In tests at both scales, simulants were used to mimic the relevant physical properties projected for actual WTP process streams.

Daniel, Richard C.; Gauglitz, Phillip A.; Burns, Carolyn A.; Fountain, Matthew S.; Shimskey, Rick W.; Billing, Justin M.; Bontha, Jagannadha R.; Kurath, Dean E.; Jenks, Jeromy WJ; MacFarlan, Paul J.; Mahoney, Lenna A.

2013-08-01T23:59:59.000Z

163

Workshop on Scalable Cyber-Security Challenges in Large-Scale Networks: Deployment Obstacles  

E-Print Network [OSTI]

Workshop on Scalable Cyber-Security Challenges in Large-Scale Networks: Deployment Obstacles Large, and Definitions of Cybersecurity.... 8 Conventional Wisdom is Inadequate....................................... 9 Directions in Scalable Cyber-Security in Large-Scale Networks: Deployment Obstacles." The workshop

Feigenbaum, Joan

164

Fractal large-scale structure from a stochastic scaling law model  

E-Print Network [OSTI]

A stochastic model relating the parameters of astrophysical structures to the parameters of their granular components is applied to the formation of hierarchical, large-scale structures from galaxies assumed as point-like objects. If the density profile of galaxies on a given scale is described by a power law then the stochastic model leads naturally to a mass function that is proportional to the square of the distance from an occupied point, which corresponds to a two-point correlation function that is inversely proportional to the distance. This result is consistent with observations indicating that galaxies are, on the largest scales, characterized by a fractal distribution with a dimension of order 2 and well-fit with transition to homogeneity at cosmological scales.

S. Capozziello; S. Funkhouser

2009-03-27T23:59:59.000Z

165

ORNL/TM-2001/280 Analysis of CHP Potential  

E-Print Network [OSTI]

ORNL/TM-2001/280 Analysis of CHP Potential at Federal Sites February 2002 S. W. Hadley K. L. Kline OF CHP POTENTIAL AT FEDERAL SITES S. W. Hadley K. L. Kline S. E. Livengood J. W. Van Dyke February 2002 for the U.S. DEPARTMENT OF ENERGY under contract no. DE-AC05-00OR22725 #12;Federal CHP Potential #12;Federal

Oak Ridge National Laboratory

166

MICRO-CHP System for Residential Applications  

SciTech Connect (OSTI)

This is the final report of progress under Phase I of a project to develop and commercialize a micro-CHP system for residential applications that provides electrical power, heating, and cooling for the home. This is the first phase of a three-phase effort in which the residential micro-CHP system will be designed (Phase I), developed and tested in the laboratory (Phase II); and further developed and field tested (Phase III). The project team consists of Advanced Mechanical Technology, Inc. (AMTI), responsible for system design and integration; Marathon Engine Systems, Inc. (MES), responsible for design of the engine-generator subsystem; AO Smith, responsible for design of the thermal storage and water heating subsystems; Trane, a business of American Standard Companies, responsible for design of the HVAC subsystem; and AirXchange, Inc., responsible for design of the mechanical ventilation and dehumidification subsystem.

Joseph Gerstmann

2009-01-31T23:59:59.000Z

167

Parallel Index and Query for Large Scale Data Analysis  

SciTech Connect (OSTI)

Modern scientific datasets present numerous data management and analysis challenges. State-of-the-art index and query technologies are critical for facilitating interactive exploration of large datasets, but numerous challenges remain in terms of designing a system for process- ing general scientific datasets. The system needs to be able to run on distributed multi-core platforms, efficiently utilize underlying I/O infrastructure, and scale to massive datasets. We present FastQuery, a novel software framework that address these challenges. FastQuery utilizes a state-of-the-art index and query technology (FastBit) and is designed to process mas- sive datasets on modern supercomputing platforms. We apply FastQuery to processing of a massive 50TB dataset generated by a large scale accelerator modeling code. We demonstrate the scalability of the tool to 11,520 cores. Motivated by the scientific need to search for inter- esting particles in this dataset, we use our framework to reduce search time from hours to tens of seconds.

Chou, Jerry; Wu, Kesheng; Ruebel, Oliver; Howison, Mark; Qiang, Ji; Prabhat,; Austin, Brian; Bethel, E. Wes; Ryne, Rob D.; Shoshani, Arie

2011-07-18T23:59:59.000Z

168

expanding_chp_in_your_state.doc | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

CHP in Your State Sustainable Energy Resources for Consumers (SERC) - Solar Hot Water Sustainable Energy Resources for Consumers (SERC) - GeothermalGround-Source Heat Pumps...

169

The International CHP/DHC Collaborative - Advancing Near-Term...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

International Energy Agency (IEA) has developed a scorecard of national Combined Heat and Power (CHP)District Heat and Cooling (DHC) policy efforts that takes into account three...

170

CHP: Connecting the Gap between Markets and Utility Interconnection...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Markets and Utility Interconnection and Tariff Practices, 2006 The adoption of combined heat and power (CHP) systems by American industries has made substantial strides in the...

171

Barriers to CHP with Renewable Portfolio Standards, Draft White...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

helped spur the growth of renewable energy projects, including solar, wind, and biomass power. This report aims to determine the barriers to CHP that exist within state RPS...

172

2005 CHP Action Agenda: Innovating, Advocating, and Delivering...  

Energy Savers [EERE]

Solutions, October 2005 More than five years since the CHP Challenge and Industry Roadmap was released, this document is intended to provide the situational context in which...

173

U.S. CHP Installations Incorporating Thermal Energy Storage ...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Company of Lisle, Illinois, for UT-Battelle, Oak Ridge National Laboratory. tictesdatabase.pdf More Documents & Publications Database (Report) of U.S. CHP Installations...

174

CHP Project Development Handbook (U.S. Environmental Protection...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Partnership) The mission of the U.S. Environmental Protection Agency's (EPA's) Combined Heat and Power (CHP) Partnership is to increase the use of cost-effective, environmentally...

175

CHP: Enabling Resilient Energy Infrastructure for Critical Facilities...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

policies designed to promote CHP in critical infrastructure applications. Combined Heat and Power: Enabling Resilient Energy Infrastructure for Critical Facilities (March...

176

CHP Research and Development - Presentation by Oak Ridge National...  

Broader source: Energy.gov (indexed) [DOE]

- Presentation by Oak Ridge National Laboratory, June 2011 Presentation on Combined Heat and Power (CHP) Research and Development, given by K. Dean Edwards of Oak Ridge...

177

CHP and Bioenergy Systems for Landfills and Wastewater Treatment...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Systems for Landfills and Wastewater Treatment Plants CHP and Bioenergy Systems for Landfills and Wastewater Treatment Plants There are important issues to consider when selecting...

178

CHP and Bioenergy for Landfills and Wastewater Treatment Plants...  

Broader source: Energy.gov (indexed) [DOE]

for Landfills and Wastewater Treatment Plants: Market Opportunities CHP and Bioenergy for Landfills and Wastewater Treatment Plants: Market Opportunities This document explores...

179

Modular CHP System for Utica College: Design Specification, March...  

Broader source: Energy.gov (indexed) [DOE]

install and interconnect at the College with minimal time and engineering needs. uticachp.pdf More Documents & Publications Commissioning of CHP Systems - White Paper, April...

180

CHP Education and Outreach Guide to State and Federal Government...  

Broader source: Energy.gov (indexed) [DOE]

representatives in the states and the federal government about combined heat and power (CHP). It was compiled in October 2000 and updated October 2005. chpeducationandoutreach...

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Optimization Online - Nonlinear Optimisation in CHP-Applications  

E-Print Network [OSTI]

Nov 14, 2002 ... Nonlinear Optimisation in CHP-Applications. Michael Wigbels (wim ***at*** umsicht.fhg.de) Wilhelm Althaus (alt ***at*** umsicht.fhg.de)

Michael Wigbels

2002-11-14T23:59:59.000Z

182

Opportunities for CHP at Wastewater Treatment Facilities: Market...  

Broader source: Energy.gov (indexed) [DOE]

2008 EPA CHP Partnership Update Biomass Program Perspectives on Anaerobic Digestion and Fuel Cell Integration at Biorefineries Biogas Technologies and Integration with Fuel Cells...

183

Combustion Turbine CHP System for Food Processing Industry -...  

Broader source: Energy.gov (indexed) [DOE]

power grid. The fact sheet contains performance data from the plant after one year of operation. Combustion Turbine CHP System for Food Processing Industry More Documents &...

184

Cosmological Implications of the CMB Large-scale Structure  

E-Print Network [OSTI]

WMAP and Planck may have uncovered several anomalies in the full CMB sky that could indicate possible new physics driving the growth of density fluctuations in the early Universe. These include an unusually low power at the largest scales and an apparent alignment of the quadrupole and octopole moments. In LCDM, the quadrupole and octopole moments should be statistically independent. These low probability features may simply be due to posterior selections from many such possible effects. If this is not the case, however, their combined statistical significance would be equal to the product of their individual significances. Ignoring the biasing due to posterior selection, the missing large-angle correlations would have a probability as low as ~0.1% and the low-l multipole alignment would be unlikely at the ~4.9% level; under the least favourable conditions, their simultaneous observation in the context of the standard model could then be likely at only the ~0.005% level. In this paper, we explore the possibility that these features are indeed anomalous, and show that the corresponding probability of CMB multipole alignment in the R_h=ct Universe would then be ~7-10%, depending on the number of large-scale Sachs-Wolfe induced fluctuations. Since the low power at the largest spatial scales is reproduced in this cosmology without the need to invoke cosmic variance, the overall likelihood of observing both of these features in the CMB is > 7%, much more likely than in LCDM. The key physical ingredient responsible for this difference is the existence in the former of a maximum fluctuation size at the time of recombination, which is absent in the latter because of inflation.

Fulvio Melia

2014-09-27T23:59:59.000Z

185

Inflationary tensor fossils in large-scale structure  

E-Print Network [OSTI]

Inflation models make specific predictions for a tensor-scalar-scalar three-point correlation, or bispectrum, between one gravitational-wave (tensor) mode and two density-perturbation (scalar) modes. This tensor-scalar-scalar correlation leads to a local power quadrupole, an apparent departure from statistical isotropy in our Universe, as well as characteristic four-point correlations in the current mass distribution in the Universe. So far, the predictions for these observables have been worked out only for single-clock models in which certain consistency conditions between the tensor-scalar-scalar correlation and tensor and scalar power spectra are satisfied. Here we review the requirements on inflation models for these consistency conditions to be satisfied. We then consider several examples of inflation models, such as non-attractor and solid inflation models, in which these conditions are put to the test. In solid inflation the simplest consistency conditions are already violated whilst in the non-attractor model we find that, contrary to the standard scenario, the tensor-scalar-scalar correlator probes directly relevant model-dependent information. We work out the predictions for observables in these models. For non-attractor inflation we find an apparent local quadrupolar departure from statistical isotropy in large-scale structure but that this power quadrupole decreases very rapidly at smaller scales. The consistency of the CMB quadrupole with statistical isotropy then constrains the distance scale that corresponds to the transition from the non-attractor to attractor phase of inflation to be larger than the currently observable horizon. Solid inflation predicts clustering fossils signatures in the current galaxy distribution that may be large enough to be detectable with forthcoming, and possibly even current, galaxy surveys.

Emanuela Dimastrogiovanni; Matteo Fasiello; Donghui Jeong; Marc Kamionkowski

2014-07-30T23:59:59.000Z

186

Flexible CHP System with Low NOx, CO and VOC Emissions - Fact...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Sheet, 2014 Flexible CHP System with Low NOx, CO and VOC Emissions - Fact Sheet, 2014 The Gas Technology Institute, in collaboration with Cannon Boiler Works, Integrated CHP...

187

Lateral solids dispersion coefficient in large-scale fluidized beds  

SciTech Connect (OSTI)

The design of fuel feed ports in a large-scale fluidized bed combustor depends on the fuel characteristics and lateral solids mixing. However, the reported values of the effective lateral solids dispersion coefficient (D{sub sr}) are scattered in the broad range of 0.0001-0.1 m{sup 2}/s. With the aim of predicting D{sub sr} in wider fluidized beds which is difficult to measure directly or deduce from experimental results in lab-scale facilities, a computational method is proposed. It combines the Eulerian-Granular simulation and fictitious particle tracing technique. The value of D{sub sr} is calculated based on the movement of the tracers. The effect on D{sub sr} of bed width (W) ranging from 0.4 m up to 12.8 m at different levels of superficial gas velocity (U{sub 0}) is investigated. It is found that increasing W whilst maintaining U{sub 0}, D{sub sr} initially increases markedly, then its increase rate declines, and finally it stays around a constant value. The computed values of D{sub sr} are examined quantitatively and compared with a thorough list of the measured D{sub sr} in the literature since 1980s. Agreed with the measurements performed in the pilot-scale fluidized beds, the value of D{sub sr} in wider facilities at higher fluidizing velocities is predicted to be around the order of magnitude of 0.1 m{sup 2}/s, much higher than that in lab-scale beds. Finally, the effect of D{sub sr} on the distribution of fuel particles over the cross section in fluidized beds with the specified layout of feed ports is discussed. (author)

Liu, Daoyin; Chen, Xiaoping [School of Energy and Environment, Southeast University, Nanjing 210096 (China)

2010-11-15T23:59:59.000Z

188

The XMM/Megacam-VST/VIRMOS Large Scale Structure Survey  

E-Print Network [OSTI]

The objective of the XMM-LSS Survey is to map the large scale structure of the universe, as highlighted by clusters and groups of galaxies, out to a redshift of about 1, over a single 8x8 sq.deg. area. For the first time, this will reveal the topology of the distribution of the deep potential wells and provide statistical measurements at truly cosmological distances. In addition, clusters identified via their X-ray properties will form the basis for the first uniformly-selected, multi-wavelength survey of the evolution of clusters and individual cluster galaxies as a function of redshift. The survey will also address the very important question of the QSO distribution within the cosmic web.

M. Pierre

2000-11-08T23:59:59.000Z

189

High Metallicity, Photoionised Gas in Intergalactic Large-Scale Filaments  

E-Print Network [OSTI]

We present high-resolution UV spectra of absorption-line systems toward the low-z QSO HS0624+6907 (z=0.3700). Coupled with spectroscopic galaxy redshifts, we find that many of these absorbers are integalactic gas clouds distributed within large-scale structures. The gas is cool (T0.9). STIS data reveal a cluster of 13 HI Lyman alpha lines within a 1000 km/s interval at z=0.0635. We find 10 galaxies at this redshift with impact parameters ranging from 135 h^-1 kpc to 1.37 h^-1 Mpc. We attribute the HI Lya absorptions to intragroup medium gas, possibly from a large-scale filament viewed along its long axis. Remarkably, the metallicity is near-solar, [M/H] = -0.05 +/- 0.4 (2 sigma uncertainty), yet the nearest galaxy which might pollute the IGM is at least 135 h_70^-1 kpc away. Tidal stripping from nearby galaxies appears to be the most likely origin of this highly enriched, cool gas. More than six Abell galaxy clusters are found within 4 degree of the sight line suggesting that the QSO line of sight passes near a node in the cosmic web. At z~0.077, we find absorption systems as well as galaxies at the redshift of the nearby clusters Abell 564 and Abell 559. We conclude that the sight line pierces a filament of gas and galaxies feeding into these clusters. The absorber at z_abs = 0.07573 associated with Abell 564/559 also has a high metallicity with [C/H] > -0.6, but again the closest galaxy is relatively far from the sight line (293 h^-1 kpc).

Bastien Aracil; Todd M. Tripp; David V. Bowen; Jason X. Proschaska; Hsiao-Wen Chen; Brenda L. Frye

2006-08-21T23:59:59.000Z

190

Training a Large Scale Classifier with the Quantum Adiabatic Algorithm  

E-Print Network [OSTI]

In a previous publication we proposed discrete global optimization as a method to train a strong binary classifier constructed as a thresholded sum over weak classifiers. Our motivation was to cast the training of a classifier into a format amenable to solution by the quantum adiabatic algorithm. Applying adiabatic quantum computing (AQC) promises to yield solutions that are superior to those which can be achieved with classical heuristic solvers. Interestingly we found that by using heuristic solvers to obtain approximate solutions we could already gain an advantage over the standard method AdaBoost. In this communication we generalize the baseline method to large scale classifier training. By large scale we mean that either the cardinality of the dictionary of candidate weak classifiers or the number of weak learners used in the strong classifier exceed the number of variables that can be handled effectively in a single global optimization. For such situations we propose an iterative and piecewise approach in which a subset of weak classifiers is selected in each iteration via global optimization. The strong classifier is then constructed by concatenating the subsets of weak classifiers. We show in numerical studies that the generalized method again successfully competes with AdaBoost. We also provide theoretical arguments as to why the proposed optimization method, which does not only minimize the empirical loss but also adds L0-norm regularization, is superior to versions of boosting that only minimize the empirical loss. By conducting a Quantum Monte Carlo simulation we gather evidence that the quantum adiabatic algorithm is able to handle a generic training problem efficiently.

Hartmut Neven; Vasil S. Denchev; Geordie Rose; William G. Macready

2009-12-04T23:59:59.000Z

191

Large-Angular-Scale Anisotropy in the Cosmic Background Radiation  

DOE R&D Accomplishments [OSTI]

We report the results of an extended series of airborne measurements of large-angular-scale anisotropy in the 3 K cosmic background radiation. Observations were carried out with a dual-antenna microwave radiometer operating at 33 GHz (.089 cm wavelength) flown on board a U-2 aircraft to 20 km altitude. In eleven flights, between December 1976 and May 1978, the radiometer measured differential intensity between pairs of directions distributed over most of the northern hemisphere with an rms sensitivity of 47 mK Hz{sup 1?}. The measurements how clear evidence of anisotropy that is readily interpreted as due to the solar motion relative to the sources of the radiation. The anisotropy is well fit by a first order spherical harmonic of amplitude 360{+ or -}50km sec{sup -1} toward the direction 11.2{+ or -}0.5 hours of right ascension and 19 {+ or -}8 degrees declination. A simultaneous fit to a combined hypotheses of dipole and quadrupole angular distributions places a 1 mK limit on the amplitude of most components of quadrupole anisotropy with 90% confidence. Additional analysis places a 0.5 mK limit on uncorrelated fluctuations (sky-roughness) in the 3 K background on an angular scale of the antenna beam width, about 7 degrees.

Gorenstein, M. V.; Smoot, G. F.

1980-05-00T23:59:59.000Z

192

Ferroelectric opening switches for large-scale pulsed power drivers.  

SciTech Connect (OSTI)

Fast electrical energy storage or Voltage-Driven Technology (VDT) has dominated fast, high-voltage pulsed power systems for the past six decades. Fast magnetic energy storage or Current-Driven Technology (CDT) is characterized by 10,000 X higher energy density than VDT and has a great number of other substantial advantages, but it has all but been neglected for all of these decades. The uniform explanation for neglect of CDT technology is invariably that the industry has never been able to make an effective opening switch, which is essential for the use of CDT. Most approaches to opening switches have involved plasma of one sort or another. On a large scale, gaseous plasmas have been used as a conductor to bridge the switch electrodes that provides an opening function when the current wave front propagates through to the output end of the plasma and fully magnetizes the plasma - this is called a Plasma Opening Switch (POS). Opening can be triggered in a POS using a magnetic field to push the plasma out of the A-K gap - this is called a Magnetically Controlled Plasma Opening Switch (MCPOS). On a small scale, depletion of electron plasmas in semiconductor devices is used to affect opening switch behavior, but these devices are relatively low voltage and low current compared to the hundreds of kilo-volts and tens of kilo-amperes of interest to pulsed power. This work is an investigation into an entirely new approach to opening switch technology that utilizes new materials in new ways. The new materials are Ferroelectrics and using them as an opening switch is a stark contrast to their traditional applications in optics and transducer applications. Emphasis is on use of high performance ferroelectrics with the objective of developing an opening switch that would be suitable for large scale pulsed power applications. Over the course of exploring this new ground, we have discovered new behaviors and properties of these materials that were here to fore unknown. Some of these unexpected discoveries have lead to new research directions to address challenges.

Brennecka, Geoffrey L.; Rudys, Joseph Matthew; Reed, Kim Warren; Pena, Gary Edward; Tuttle, Bruce Andrew; Glover, Steven Frank

2009-11-01T23:59:59.000Z

193

Large-Scale Data Challenges in Future Power Grids  

SciTech Connect (OSTI)

This paper describes technical challenges in supporting large-scale real-time data analysis for future power grid systems and discusses various design options to address these challenges. Even though the existing U.S. power grid has served the nation remarkably well over the last 120 years, big changes are in the horizon. The widespread deployment of renewable generation, smart grid controls, energy storage, plug-in hybrids, and new conducting materials will require fundamental changes in the operational concepts and principal components. The whole system becomes highly dynamic and needs constant adjustments based on real time data. Even though millions of sensors such as phase measurement units (PMUs) and smart meters are being widely deployed, a data layer that can support this amount of data in real time is needed. Unlike the data fabric in cloud services, the data layer for smart grids must address some unique challenges. This layer must be scalable to support millions of sensors and a large number of diverse applications and still provide real time guarantees. Moreover, the system needs to be highly reliable and highly secure because the power grid is a critical piece of infrastructure. No existing systems can satisfy all the requirements at the same time. We examine various design options. In particular, we explore the special characteristics of power grid data to meet both scalability and quality of service requirements. Our initial prototype can improve performance by orders of magnitude over existing general-purpose systems. The prototype was demonstrated with several use cases from PNNL’s FPGI and was shown to be able to integrate huge amount of data from a large number of sensors and a diverse set of applications.

Yin, Jian; Sharma, Poorva; Gorton, Ian; Akyol, Bora A.

2013-03-25T23:59:59.000Z

194

Research, Development and Demonstration of Micro-CHP System for Residential Applications  

SciTech Connect (OSTI)

ECR International and its joint venture company, Climate Energy, are at the forefront of the effort to deliver residential-scale combined heat and power (Micro-CHP) products to the USA market. Part of this substantial program is focused on the development of a new class of steam expanders that offers the potential for significantly lower costs for small-scale power generation technology. The heart of this technology is the scroll expander, a machine that has revolutionized the HVAC refrigerant compressor industry in the last 15 years. The liquid injected cogeneration (LIC) technology is at the core of the efforts described in this report, and remains an excellent option for low cost Micro-CHP systems. ECR has demonstrated in several prototype appliances that the concept for LIC can be made into a practical product. The continuing challenge is to identify economical scroll machine designs that will meet the performance and endurance requirements needed for a long life appliance application. This report describes the numerous advances made in this endeavor by ECR International. Several important advances are described in this report. Section 4 describes a marketing and economics study that integrates the technical performance of the LIC system with real-world climatic data and economic analysis to assess the practical impact that different factors have on the economic application of Micro-CHP in residential applications. Advances in the development of a working scroll steam expander are discussed in Section 5. A rigorous analytical assessment of the performance of scroll expanders, including the difficult to characterize impact of pocket to pocket flank leakage, is presented in Section 5.1. This is followed with an FEA study of the thermal and pressure induced deflections that would result from the normal operation of an advanced scroll expander. Section 6 describes the different scroll expanders and test fixtures developed during this effort. Another key technical challenge to the development of a long life LIC system is the development of a reliable and efficient steam generator. The steam generator and support equipment development is described in Section 7. Just one year ago, ECR International announced through its joint venture company, Climate Energy, that it was introducing to the USA market a new class of Micro-CHP product using the state-of-the-art Honda MCHP gas fired internal combustion (IC) engine platform. We now have installed Climate Energy Micro-CHP systems in 20 pilot demonstration sites for the 2005/2006 heating season. This breakthrough success with IC engine based systems paves the way for future advanced steam cycle Micro-CHP systems to be introduced.

Karl Mayer

2010-03-31T23:59:59.000Z

195

Biomass DHP/ CHP benefits at local and regional level  

E-Print Network [OSTI]

Biomass DHP/ CHP ­ benefits at local and regional level Krzysztof Gierulski EC Baltic RenewableEnergy Workshop, Brussels 01.07.2002 http://www.managenergy.net/conference/ren0702/gierulski.pdf #12;Biomass DHP of conversion to biomass CHP at larger sites in PL", OPET) n Technical assistance (,,Feasibility

196

Design of Heat Exchanger for Heat Recovery in CHP Systems  

E-Print Network [OSTI]

The objective of this research is to review issues related to the design of heat recovery unit in Combined Heat and Power (CHP) systems. To meet specific needs of CHP systems, configurations can be altered to affect different factors of the design...

Kozman, T. A.; Kaur, B.; Lee, J.

197

Combined Heat & Power (CHP) -A Clean Energy Solution for Industry  

E-Print Network [OSTI]

From the late 1970's to the early 1990's cogeneration or CHP saw enormous growth, especially in the process industries. By 1994, CHP provided 42 GW of electricity generation capacity -about 6 percent of the U.S. total. Three manufacturing industries...

Parks, H.; Hoffman, P.; Kurtovich, M.

198

Large-scale fabrication and assembly of carbon nanotubes via nanopelleting  

E-Print Network [OSTI]

Widespread use of carbon nanotubes is predicated on the development of robust large-scale manufacturing techniques. There remain, however, few feasible methods for the large-scale handling of aligned and geometrically ...

El Aguizy, Tarek A., 1977-

2004-01-01T23:59:59.000Z

199

Architectural Design and Complexity Analysis of Large-Scale Cortical Simulation on a Hybrid Computing Platform  

E-Print Network [OSTI]

- performance computing platform for large-scale mathematical models. Traditional computing architecture cannot hybrid computing architecture for the simulation and evaluation of large-scale associative neural memory models. The proposed architecture achieves very high computing and communication performances

Qiu, Qinru

200

Energy Department Awards $66.7 Million for Large-Scale Carbon...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

66.7 Million for Large-Scale Carbon Sequestration Project Energy Department Awards 66.7 Million for Large-Scale Carbon Sequestration Project December 18, 2007 - 4:58pm Addthis...

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

DOE Awards $126.6 Million for Two More Large-Scale Carbon Sequestratio...  

Broader source: Energy.gov (indexed) [DOE]

126.6 Million for Two More Large-Scale Carbon Sequestration Projects DOE Awards 126.6 Million for Two More Large-Scale Carbon Sequestration Projects May 6, 2008 - 11:30am Addthis...

202

PROPERTIES IMPORTANT TO MIXING FOR WTP LARGE SCALE INTEGRATED TESTING  

SciTech Connect (OSTI)

Large Scale Integrated Testing (LSIT) is being planned by Bechtel National, Inc. to address uncertainties in the full scale mixing performance of the Hanford Waste Treatment and Immobilization Plant (WTP). Testing will use simulated waste rather than actual Hanford waste. Therefore, the use of suitable simulants is critical to achieving the goals of the test program. External review boards have raised questions regarding the overall representativeness of simulants used in previous mixing tests. Accordingly, WTP requested the Savannah River National Laboratory (SRNL) to assist with development of simulants for use in LSIT. Among the first tasks assigned to SRNL was to develop a list of waste properties that matter to pulse-jet mixer (PJM) mixing of WTP tanks. This report satisfies Commitment 5.2.3.1 of the Department of Energy Implementation Plan for Defense Nuclear Facilities Safety Board Recommendation 2010-2: physical properties important to mixing and scaling. In support of waste simulant development, the following two objectives are the focus of this report: (1) Assess physical and chemical properties important to the testing and development of mixing scaling relationships; (2) Identify the governing properties and associated ranges for LSIT to achieve the Newtonian and non-Newtonian test objectives. This includes the properties to support testing of sampling and heel management systems. The test objectives for LSIT relate to transfer and pump out of solid particles, prototypic integrated operations, sparger operation, PJM controllability, vessel level/density measurement accuracy, sampling, heel management, PJM restart, design and safety margin, Computational Fluid Dynamics (CFD) Verification and Validation (V and V) and comparison, performance testing and scaling, and high temperature operation. The slurry properties that are most important to Performance Testing and Scaling depend on the test objective and rheological classification of the slurry (i.e., Newtonian or non-Newtonian). The most important properties for testing with Newtonian slurries are the Archimedes number distribution and the particle concentration. For some test objectives, the shear strength is important. In the testing to collect data for CFD V and V and CFD comparison, the liquid density and liquid viscosity are important. In the high temperature testing, the liquid density and liquid viscosity are important. The Archimedes number distribution combines effects of particle size distribution, solid-liquid density difference, and kinematic viscosity. The most important properties for testing with non-Newtonian slurries are the slurry yield stress, the slurry consistency, and the shear strength. The solid-liquid density difference and the particle size are also important. It is also important to match multiple properties within the same simulant to achieve behavior representative of the waste. Other properties such as particle shape, concentration, surface charge, and size distribution breadth, as well as slurry cohesiveness and adhesiveness, liquid pH and ionic strength also influence the simulant properties either directly or through other physical properties such as yield stress.

Koopman, D.; Martino, C.; Poirier, M.

2012-04-26T23:59:59.000Z

203

Large-Scale Spray Releases: Initial Aerosol Test Results  

SciTech Connect (OSTI)

One of the events postulated in the hazard analysis at the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak involves extrapolating from correlations reported in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids with Newtonian fluid behavior. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials that will be processed in the WTP and across processing facilities in the DOE complex. Two key technical areas were identified where testing results were needed to improve the technical basis by reducing the uncertainty due to extrapolating existing literature results. The first technical need was to quantify the role of slurry particles in small breaches where the slurry particles may plug and result in substantially reduced, or even negligible, respirable fraction formed by high-pressure sprays. The second technical need was to determine the aerosol droplet size distribution and volume from prototypic breaches and fluids, specifically including sprays from larger breaches with slurries where data from the literature are scarce. To address these technical areas, small- and large-scale test stands were constructed and operated with simulants to determine aerosol release fractions and generation rates from a range of breach sizes and geometries. The properties of the simulants represented the range of properties expected in the WTP process streams and included water, sodium salt solutions, slurries containing boehmite or gibbsite, and a hazardous chemical simulant. The effect of anti-foam agents was assessed with most of the simulants. Orifices included round holes and rectangular slots. The round holes ranged in size from 0.2 to 4.46 mm. The slots ranged from (width × length) 0.3 × 5 to 2.74 × 76.2 mm. Most slots were oriented longitudinally along the pipe, but some were oriented circumferentially. In addition, a limited number of multi-hole test pieces were tested in an attempt to assess the impact of a more complex breach. Much of the testing was conducted at pressures of 200 and 380 psi, but some tests were conducted at 100 psi. Testing the largest postulated breaches was deemed impractical because of the large size of some of the WTP equipment. The purpose of this report is to present the experimental results and analyses for the aerosol measurements obtained in the large-scale test stand. The report includes a description of the simulants used and their properties, equipment and operations, data analysis methodology, and test results. The results of tests investigating the role of slurry particles in plugging of small breaches are reported in Mahoney et al. 2012a. The results of the aerosol measurements in the small-scale test stand are reported in Mahoney et al. (2012b).

Schonewill, Philip P.; Gauglitz, Phillip A.; Bontha, Jagannadha R.; Daniel, Richard C.; Kurath, Dean E.; Adkins, Harold E.; Billing, Justin M.; Burns, Carolyn A.; Davis, James M.; Enderlin, Carl W.; Fischer, Christopher M.; Jenks, Jeromy WJ; Lukins, Craig D.; MacFarlan, Paul J.; Shutthanandan, Janani I.; Smith, Dennese M.

2012-12-01T23:59:59.000Z

204

Linearly Scaling 3D Fragment Method for Large-Scale Electronic Structure Calculations  

SciTech Connect (OSTI)

We present a new linearly scaling three-dimensional fragment (LS3DF) method for large scale ab initio electronic structure calculations. LS3DF is based on a divide-and-conquer approach, which incorporates a novel patching scheme that effectively cancels out the artificial boundary effects due to the subdivision of the system. As a consequence, the LS3DF program yields essentially the same results as direct density functional theory (DFT) calculations. The fragments of the LS3DF algorithm can be calculated separately with different groups of processors. This leads to almost perfect parallelization on tens of thousands of processors. After code optimization, we were able to achieve 35.1 Tflop/s, which is 39percent of the theoretical speed on 17,280 Cray XT4 processor cores. Our 13,824-atom ZnTeO alloy calculation runs 400 times faster than a direct DFTcalculation, even presuming that the direct DFT calculation can scale well up to 17,280 processor cores. These results demonstrate the applicability of the LS3DF method to material simulations, the advantage of using linearly scaling algorithms over conventional O(N3) methods, and the potential for petascale computation using the LS3DF method.

Wang, Lin-Wang; Lee, Byounghak; Shan, Hongzhang; Zhao, Zhengji; Meza, Juan; Strohmaier, Erich; Bailey, David H.

2008-07-01T23:59:59.000Z

205

Supporting Large-scale Continuous Stream Datacenters via Pub/Sub Middleware and Adaptive Transport Protocols  

E-Print Network [OSTI]

Supporting Large-scale Continuous Stream Datacenters via Pub/Sub Middleware and Adaptive Transport {mahesh, ken}@cs.cornell.edu Abstract Large-scale datacenters that handle continuous data streams require constitutes a promising area of research to address the challenges of these types of large-scale datacenters

Schmidt, Douglas C.

206

Influence of Western North Pacific Tropical Cyclones on Their Large-Scale Environment  

E-Print Network [OSTI]

water vapor, and sea surface tem- perature (SST)] on an index of TC activity [accumulated cyclone energyInfluence of Western North Pacific Tropical Cyclones on Their Large-Scale Environment ADAM H. SOBEL) tropical cyclones (TCs) on their large-scale environment by lag regressing various large-scale climate

Sobel, Adam

207

CHP Deployment Program: AMO Technical Assistance Overview  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: Top FiveDepartment of Energy BuildingsBuriedJune 28,EnergyDecemberCHP

208

Combined Heat and Power (CHP) Technology Development  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomenthe HouseStudents2.2 Documentation and ApprovalThe4,Department ofThisThe CHP John

209

CHP Emissions Reduction Estimator | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpenWendeGuo FengBoulder, CO)Burundi: EnergyCECG Maine,CHP Emissions

210

Fuel Cell Power Model for CHP and CHHP Economics and Performance Analysis (Presentation)  

SciTech Connect (OSTI)

This presentation describes the fuel cell power model for CHP and CHHP economics and performance analysis.

Steward, D.; Penev, M.

2010-03-30T23:59:59.000Z

211

MODELING THE DIFFUSION OF MICRO-CHP IN A RESIDENTIAL AREA  

E-Print Network [OSTI]

i MODELING THE DIFFUSION OF MICRO-CHP IN A RESIDENTIAL AREA by Christian Chemaly A thesis submitted OF MICRO-CHP IN A RESIDENTIAL AREA by Christian Chemaly A thesis presented on the diffusion of micro-CHP shows that micro-CHP will not reach 50% of the market in less than 20 years. Furthermore it analyses

212

CHP and CHPsim: A Language and Simulator for Fine-Grain Distributed Computation  

E-Print Network [OSTI]

1 CHP and CHPsim: A Language and Simulator for Fine-Grain Distributed Computation Alain J. Martin Abstract--This paper describes a complete and stable version of CHP and the simulator CHPsim. CHP partial versions of the language are already widely used, but CHP has never been presented as a complete

Martin, Alain

213

Giant radio galaxies - II. Tracers of large-scale structure  

E-Print Network [OSTI]

We have carried out optical spectroscopy with the Anglo-Australian Telescope for 24,726 objects surrounding a sample of 19 Giant Radio Galaxies (GRGs) selected to have redshifts in the range 0.05 to 0.15 and projected linear sizes from 0.8 to 3.2 Mpc. Such radio galaxies are ideal candidates to study the Warm-Hot Intergalactic Medium (WHIM) because their radio lobes extend beyond the ISM and halos of their host galaxies, and into the tenuous IGM. We were able to measure redshifts for 9,076 galaxies. Radio imaging of each GRG, including high-sensitivity, wideband radio observations from the Australia Telescope Compact Array for 12 GRGs and host optical spectra (presented in a previous paper, Malarecki et al. 2013), is used in conjunction with the surrounding galaxy redshifts to trace large-scale structure. We find that the mean galaxy number overdensity in volumes of ~700 Mpc$^3$ near the GRG host galaxies is ~70 indicating an overdense but non-virialized environment. A Fourier component analysis is used to qu...

Malarecki, J M; Saripalli, L; Staveley-Smith, L; Subrahmanyan, R

2015-01-01T23:59:59.000Z

214

Classical Control of Large-Scale Quantum Computers  

E-Print Network [OSTI]

The accelerated development of quantum technology has reached a pivotal point. Early in 2014, several results were published demonstrating that several experimental technologies are now accurate enough to satisfy the requirements of fault-tolerant, error corrected quantum computation. While there are many technological and experimental issues that still need to be solved, the ability of experimental systems to now have error rates low enough to satisfy the fault-tolerant threshold for several error correction models is a tremendous milestone. Consequently, it is now a good time for the computer science and classical engineering community to examine the {\\em classical} problems associated with compiling quantum algorithms and implementing them on future quantum hardware. In this paper, we will review the basic operational rules of a topological quantum computing architecture and outline one of the most important classical problems that need to be solved; the decoding of error correction data for a large-scale quantum computer. We will endeavour to present these problems independently from the underlying physics as much of this work can be effectively solved by non-experts in quantum information or quantum mechanics.

Simon J. Devitt

2014-05-20T23:59:59.000Z

215

Testing Inflation with Large Scale Structure: Connecting Hopes with Reality  

E-Print Network [OSTI]

The statistics of primordial curvature fluctuations are our window into the period of inflation, where these fluctuations were generated. To date, the cosmic microwave background has been the dominant source of information about these perturbations. Large scale structure is however from where drastic improvements should originate. In this paper, we explain the theoretical motivations for pursuing such measurements and the challenges that lie ahead. In particular, we discuss and identify theoretical targets regarding the measurement of primordial non-Gaussianity. We argue that when quantified in terms of the local (equilateral) template amplitude $f_{\\rm NL}^{\\rm loc}$ ($f_{\\rm NL}^{\\rm eq}$), natural target levels of sensitivity are $\\Delta f_{\\rm NL}^{\\rm loc, eq.} \\simeq 1$. We highlight that such levels are within reach of future surveys by measuring 2-, 3- and 4-point statistics of the galaxy spatial distribution. This paper summarizes a workshop held at CITA (University of Toronto) on October 23-24, 2014.

Marcelo Alvarez; Tobias Baldauf; J. Richard Bond; Neal Dalal; Roland de Putter; Olivier Doré; Daniel Green; Chris Hirata; Zhiqi Huang; Dragan Huterer; Donghui Jeong; Matthew C. Johnson; Elisabeth Krause; Marilena Loverde; Joel Meyers; P. Daniel Meerburg; Leonardo Senatore; Sarah Shandera; Eva Silverstein; Anže Slosar; Kendrick Smith; Matias Zaldarriaga; Valentin Assassi; Jonathan Braden; Amir Hajian; Takeshi Kobayashi; George Stein; Alexander van Engelen

2014-12-15T23:59:59.000Z

216

Decoherence Rates in Large Scale Quantum Computers and Macroscopic Systems  

E-Print Network [OSTI]

Markovian regime decoherence effects in quantum computers are studied in terms of the fidelity for the situation where the number of qubits N becomes large. A general expression giving the decoherence time scale in terms of Markovian relaxation elements and expectation values of products of system fluctuation operators is obtained, which could also be applied to study decoherence in other macroscopic systems such as Bose condensates and superconductors. A standard circuit model quantum computer involving three-state lambda system ionic qubits is considered, with qubits localised around well-separated positions via trapping potentials. The centre of mass vibrations of the qubits act as a reservoir. Coherent one and two qubit gating processes are controlled by time dependent localised classical electromagnetic fields that address specific qubits, the two qubit gating processes being facilitated by a cavity mode ancilla, which permits state interchange between qubits. With a suitable choice of parameters, it is found that the decoherence time can be made essentially independent of N.

B J Dalton

2005-07-25T23:59:59.000Z

217

CHP Integrated with Burners for Packaged Boilers  

SciTech Connect (OSTI)

The objective of this project was to engineer, design, fabricate, and field demonstrate a Boiler Burner Energy System Technology (BBEST) that integrates a low-cost, clean burning, gas-fired simple-cycle (unrecuperated) 100 kWe (net) microturbine (SCMT) with a new ultra low-NOx gas-fired burner (ULNB) into one compact Combined Heat and Power (CHP) product that can be retrofit on new and existing industrial and commercial boilers in place of conventional burners. The Scope of Work for this project was segmented into two principal phases: (Phase I) Hardware development, assembly and pre-test and (Phase II) Field installation and demonstration testing. Phase I was divided into five technical tasks (Task 2 to 6). These tasks covered the engineering, design, fabrication, testing and optimization of each key component of the CHP system principally, ULNB, SCMT, assembly BBEST CHP package, and integrated controls. Phase I work culminated with the laboratory testing of the completed BBEST assembly prior to shipment for field installation and demonstration. Phase II consisted of two remaining technical tasks (Task 7 and 8), which focused on the installation, startup, and field verification tests at a pre-selected industrial plant to document performance and attainment of all project objectives. Technical direction and administration was under the management of CMCE, Inc. Altex Technologies Corporation lead the design, assembly and testing of the system. Field demonstration was supported by Leva Energy, the commercialization firm founded by executives at CMCE and Altex. Leva Energy has applied for patent protection on the BBEST process under the trade name of Power Burner and holds the license for the burner currently used in the product. The commercial term Power Burner is used throughout this report to refer to the BBEST technology proposed for this project. The project was co-funded by the California Energy Commission and the Southern California Gas Company (SCG), a division of Sempra Energy. These match funds were provided via concurrent contracts and investments available via CMCE, Altex, and Leva Energy The project attained all its objectives and is considered a success. CMCE secured the support of GI&E from Italy to supply 100 kW Turbec T-100 microturbines for the project. One was purchased by the project’s subcontractor, Altex, and a second spare was purchased by CMCE under this project. The microturbines were then modified to convert from their original recuperated design to a simple cycle configuration. Replacement low-NOx silo combustors were designed and bench tested in order to achieve compliance with the California Air Resources Board (CARB) 2007 emission limits for NOx and CO when in CHP operation. The converted microturbine was then mated with a low NOx burner provided by Altex via an integration section that allowed flow control and heat recovery to minimize combustion blower requirements; manage burner turndown; and recover waste heat. A new fully integrated control system was designed and developed that allowed one-touch system operation in all three available modes of operation: (1) CHP with both microturbine and burner firing for boiler heat input greater than 2 MMBtu/hr; (2) burner head only (BHO) when the microturbine is under service; and (3) microturbine only when boiler heat input requirements fall below 2 MMBtu/hr. This capability resulted in a burner turndown performance of nearly 10/1, a key advantage for this technology over conventional low NOx burners. Key components were then assembled into a cabinet with additional support systems for generator cooling and fuel supply. System checkout and performance tests were performed in the laboratory. The assembled system and its support equipment were then shipped and installed at a host facility where final performance tests were conducted following efforts to secure fabrication, air, and operating permits. The installed power burner is now in commercial operation and has achieved all the performance goals.

Castaldini, Carlo; Darby, Eric

2013-09-30T23:59:59.000Z

218

Advanced I/O for large-scale scientific applications.  

SciTech Connect (OSTI)

As scientific simulations scale to use petascale machines and beyond, the data volumes generated pose a dual problem. First, with increasing machine sizes, the careful tuning of IO routines becomes more and more important to keep the time spent in IO acceptable. It is not uncommon, for instance, to have 20% of an application's runtime spent performing IO in a 'tuned' system. Careful management of the IO routines can move that to 5% or even less in some cases. Second, the data volumes are so large, on the order of 10s to 100s of TB, that trying to discover the scientifically valid contributions requires assistance at runtime to both organize and annotate the data. Waiting for offline processing is not feasible due both to the impact on the IO system and the time required. To reduce this load and improve the ability of scientists to use the large amounts of data being produced, new techniques for data management are required. First, there is a need for techniques for efficient movement of data from the compute space to storage. These techniques should understand the underlying system infrastructure and adapt to changing system conditions. Technologies include aggregation networks, data staging nodes for a closer parity to the IO subsystem, and autonomic IO routines that can detect system bottlenecks and choose different approaches, such as splitting the output into multiple targets, staggering output processes. Such methods must be end-to-end, meaning that even with properly managed asynchronous techniques, it is still essential to properly manage the later synchronous interaction with the storage system to maintain acceptable performance. Second, for the data being generated, annotations and other metadata must be incorporated to help the scientist understand output data for the simulation run as a whole, to select data and data features without concern for what files or other storage technologies were employed. All of these features should be attained while maintaining a simple deployment for the science code and eliminating the need for allocation of additional computational resources.

Klasky, Scott (Oak Ridge National Laboratory, Oak Ridge, TN); Schwan, Karsten (Georgia Institute of Technology, Atlanta, GA); Oldfield, Ron A.; Lofstead, Gerald F., II (Georgia Institute of Technology, Atlanta, GA)

2010-01-01T23:59:59.000Z

219

Large Scale Computing and Storage Requirements for Nuclear Physics Research  

SciTech Connect (OSTI)

IThe National Energy Research Scientific Computing Center (NERSC) is the primary computing center for the DOE Office of Science, serving approximately 4,000 users and hosting some 550 projects that involve nearly 700 codes for a wide variety of scientific disciplines. In addition to large-scale computing resources NERSC provides critical staff support and expertise to help scientists make the most efficient use of these resources to advance the scientific mission of the Office of Science. In May 2011, NERSC, DOE’s Office of Advanced Scientific Computing Research (ASCR) and DOE’s Office of Nuclear Physics (NP) held a workshop to characterize HPC requirements for NP research over the next three to five years. The effort is part of NERSC’s continuing involvement in anticipating future user needs and deploying necessary resources to meet these demands. The workshop revealed several key requirements, in addition to achieving its goal of characterizing NP computing. The key requirements include: 1. Larger allocations of computational resources at NERSC; 2. Visualization and analytics support; and 3. Support at NERSC for the unique needs of experimental nuclear physicists. This report expands upon these key points and adds others. The results are based upon representative samples, called “case studies,” of the needs of science teams within NP. The case studies were prepared by NP workshop participants and contain a summary of science goals, methods of solution, current and future computing requirements, and special software and support needs. Participants were also asked to describe their strategy for computing in the highly parallel, “multi-core” environment that is expected to dominate HPC architectures over the next few years. The report also includes a section with NERSC responses to the workshop findings. NERSC has many initiatives already underway that address key workshop findings and all of the action items are aligned with NERSC strategic plans.

Gerber, Richard A.; Wasserman, Harvey J.

2012-03-02T23:59:59.000Z

220

Market Assessment of Biomass Gasification and Combustion Technology for Small- and Medium-Scale Applications  

SciTech Connect (OSTI)

This report provides a market assessment of gasification and direct combustion technologies that use wood and agricultural resources to generate heat, power, or combined heat and power (CHP) for small- to medium-scale applications. It contains a brief overview of wood and agricultural resources in the U.S.; a description and discussion of gasification and combustion conversion technologies that utilize solid biomass to generate heat, power, and CHP; an assessment of the commercial status of gasification and combustion technologies; a summary of gasification and combustion system economics; a discussion of the market potential for small- to medium-scale gasification and combustion systems; and an inventory of direct combustion system suppliers and gasification technology companies. The report indicates that while direct combustion and close-coupled gasification boiler systems used to generate heat, power, or CHP are commercially available from a number of manufacturers, two-stage gasification systems are largely in development, with a number of technologies currently in demonstration. The report also cites the need for a searchable, comprehensive database of operating combustion and gasification systems that generate heat, power, or CHP built in the U.S., as well as a national assessment of the market potential for the systems.

Peterson, D.; Haase, S.

2009-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

An Energy-Efficient Framework for Large-Scale Parallel Storage Systems  

E-Print Network [OSTI]

An Energy-Efficient Framework for Large-Scale Parallel Storage Systems Ziliang Zong, Matt Briggs-scale and energy-efficient parallel storage systems. To validate the efficiency of the proposed framework, a buffer that this new framework can significantly improves the energy efficiency of large-scale parallel storage systems

Qin, Xiao

222

Large Scale Computing and Storage Requirements for High Energy Physics  

SciTech Connect (OSTI)

The National Energy Research Scientific Computing Center (NERSC) is the leading scientific computing facility for the Department of Energy's Office of Science, providing high-performance computing (HPC) resources to more than 3,000 researchers working on about 400 projects. NERSC provides large-scale computing resources and, crucially, the support and expertise needed for scientists to make effective use of them. In November 2009, NERSC, DOE's Office of Advanced Scientific Computing Research (ASCR), and DOE's Office of High Energy Physics (HEP) held a workshop to characterize the HPC resources needed at NERSC to support HEP research through the next three to five years. The effort is part of NERSC's legacy of anticipating users needs and deploying resources to meet those demands. The workshop revealed several key points, in addition to achieving its goal of collecting and characterizing computing requirements. The chief findings: (1) Science teams need access to a significant increase in computational resources to meet their research goals; (2) Research teams need to be able to read, write, transfer, store online, archive, analyze, and share huge volumes of data; (3) Science teams need guidance and support to implement their codes on future architectures; and (4) Projects need predictable, rapid turnaround of their computational jobs to meet mission-critical time constraints. This report expands upon these key points and includes others. It also presents a number of case studies as representative of the research conducted within HEP. Workshop participants were asked to codify their requirements in this case study format, summarizing their science goals, methods of solution, current and three-to-five year computing requirements, and software and support needs. Participants were also asked to describe their strategy for computing in the highly parallel, multi-core environment that is expected to dominate HPC architectures over the next few years. The report includes a section that describes efforts already underway or planned at NERSC that address requirements collected at the workshop. NERSC has many initiatives in progress that address key workshop findings and are aligned with NERSC's strategic plans.

Gerber, Richard A.; Wasserman, Harvey

2010-11-24T23:59:59.000Z

223

Energy Efficiency Improvement and Cost Saving Opportunities for the Vehicle Assembly Industry: An ENERGY STAR Guide for Energy and Plant Managers  

E-Print Network [OSTI]

1998b). Distributed Small-scale CHP on a Large ManufacturingCADDET). (1998). Free CHP Saves Energy for VehicleCombined heat and power (CHP) CHP combined with absorption

Galitsky, Christina

2008-01-01T23:59:59.000Z

224

CHP at Post Street in Downtown Seattle  

SciTech Connect (OSTI)

The Post Street project had four (4), 7.960 MW, Solar Taurus-70-10801S natural gas combustion turbines. Each turbine equipped with a 40,000 lb/hr heat recovery steam generator (HRSG). The dual-fuel HRSGs was capable of generating steam using gas turbine exhaust heat or surplus electric power. The generation capacity was nominally rated at 29.2 MW. The project as proposed had a fuel rate chargeable to power of 4,900 - 5,880 Btu/kWh dependent on time of year. The CHP plant, when operating at 29.2 MW, can recycle turbine exhaust into supply 145 kpph of steam to SSC per hour. The actual SSC steam loads will vary based on weather, building occupation, plus additions / reductions of customer load served. SSC produces up to 80 kpph of steam from a biomass boiler, which is currently base loaded all year.

Gent, Stan

2012-04-12T23:59:59.000Z

225

The Role of Incentives in Promoting CHP Development  

E-Print Network [OSTI]

implementation than the presence of financial incentives for CHP, which suggests that getting regulatory and market conditions right may be more important than providing incentives. This finding could also apply to many other facets of energy efficiency policy....

Kaufman, N.; Elliot, R. N.

2010-01-01T23:59:59.000Z

226

ITP Industrial Distributed Energy: HUD CHP GUIDE #2 - FEASIBILITY...  

Broader source: Energy.gov (indexed) [DOE]

HUD CHP GUIDE 2: FEASIBILITY SCREENING FOR COMBINED HEAT AND POWER IN MULTIFAMILY HOUSING Prepared for U.S. Department of Housing and Urban Development by U.S. Department of...

227

Activation of 200 MW refusegenerated CHP upward regulation effect...  

Open Energy Info (EERE)

ineLabel":"","visitedicon":"" Display map Period Jul 2009 Dec 2010 References EU Smart Grid Projects Map1 Overview Waste CHP plants can be used in the electricity market for...

228

Activation of 200 MW refusegenerated CHP upward regulation effect...  

Open Energy Info (EERE)

CHP plants can be used in the electricity market for upward regulation by bypassing the steam turbine. The technical design for this purpose must ensure that factors such as...

229

CHP: It's Time for Combined Heat and Power  

E-Print Network [OSTI]

and export 16. Creates local jobs for installation, operation and maintenance 17. Supports competitive electricity market structure General Conclusion It is very much in the PUBLIC interest to support CHP distributed energy… even if the private incentives... of use Electricity Electricity Heat Heat Combined Heat and Power Conventional Generation Building Load Power Plant fuel (66 units of remote energy) Boiler fuel (34 units of on-site energy) CHP fuel (x units of on-site energy) Losses Losses 20 29 20...

Herweck, R.

230

Turbo King: Framework for Large-Scale Internet Delay Measurements  

E-Print Network [OSTI]

servers (which is called cache pollution) and requires large traffic overhead when deployed in large consuming half the bandwidth needed by King and reducing the impact of cache pollution by several orders building an all-to-all delay matrix between approximately 220, 000 BGP prefixes advertised in the Internet

Loguinov, Dmitri

231

Parallel I/O Software Infrastructure for Large-Scale Systems  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Parallel IO Software Infrastructure for Large-Scale Systems | Tags: Math & Computer Science Choudhary.png An illustration of how MPI---IO file domain alignment works to...

232

A Topological Framework for the Interactive Exploration of Large Scale Turbulent Combustion  

E-Print Network [OSTI]

comparison of terascale combustion simulation data. Mathe-premixed hydrogen ?ames. Combustion and Flame, [7] J. L.of Large Scale Turbulent Combustion Peer-Timo Bremer 1 ,

Bremer, Peer-Timo

2010-01-01T23:59:59.000Z

233

Performance Engineering: Understanding and Improving the Performance of Large-Scale Codes  

E-Print Network [OSTI]

An API for Runtime Code Patching,” Journal of Highof the Conference on Code Generation and Optimization,Performance of Large-Scale Codes David H. Bailey 1 , Robert

2008-01-01T23:59:59.000Z

234

The Impact of the CMB on Large-Scale Structure  

E-Print Network [OSTI]

The COBE detection of microwave anisotropies provides the best way of fixing the amplitude of cosmological fluctuations on the largest scales. We discuss the impact of this new, precise normalization and give fitting formulae for the horizon-crossing amplitude as a function of \\Omega_0 and n for both open and flat cosmologies. We also discuss the relevant normalization (\\sigma_8) at galaxy-clustering scales. Already it is clear that the inferred \\sigma_8 can be unnaccepatably high for some of the simplest inflationary models, although many minor variants give an adequate fit. Generic topological defect models appear to fare rather badly, and it is unclear whether minor variants or improved calculations will help much. The detection and mapping of structure in the CMB anisotropy spectrum on smaller scales in the near future will enable us to achieve much stronger constraints on models.

Martin White; Douglas Scott

1996-01-30T23:59:59.000Z

235

On scale and magnitude of pressure build-up induced by large-scale geologic storage of CO2  

E-Print Network [OSTI]

activities, such as oil production. Large-scale pressureannual volume of world oil production and the pore volumem 3 . In 2006, the world oil production was 4.3 km 3 (73.46

Zhou, Q.

2012-01-01T23:59:59.000Z

236

Large-Scale Syntactic Processing: Parsing the Web  

E-Print Network [OSTI]

; improve the efficiency of the parser through various methods of chart pruning; use self, processing tens of sentences per second. For web-scale text processing, we aimed to make the parser an order of magnitude faster still. The c&c parser is one of only very few parsers currently available which has

Copestake, Ann

237

On the Evolution of Thermonuclear Flames on Large Scales  

E-Print Network [OSTI]

The thermonuclear explosion of a massive white dwarf in a Type Ia supernova explosion is characterized by vastly disparate spatial and temporal scales. The extreme dynamic range inherent to the problem prevents the use of direct numerical simulation and forces modelers to resort to subgrid models to describe physical processes taking place on unresolved scales. We consider the evolution of a model thermonuclear flame in a constant gravitational field on a periodic domain. The gravitational acceleration is aligned with the overall direction of the flame propagation, making the flame surface subject to the Rayleigh-Taylor instability. The flame evolution is followed through an extended initial transient phase well into the steady-state regime. The properties of the evolution of flame surface are examined. We confirm the form of the governing equation of the evolution suggested by Khokhlov (1995). The mechanism of vorticity production and the interaction between vortices and the flame surface are discussed. The results of our investigation provide the bases for revising and extending previous subgrid-scale model.

Ju Zhang; O. E. Bronson Messer; Alexei M. Khokhlov; Tomasz Plewa

2006-10-05T23:59:59.000Z

238

SPIDER: A Balloon-borne Large-scale CMB Polarimeter  

E-Print Network [OSTI]

Spider is a balloon-borne experiment that will measure the polarization of the Cosmic Microwave Background over a large fraction of a sky at 1 degree resolution. Six monochromatic refracting millimeter-wave telescopes with large arrays of antenna-coupled transition-edge superconducting bolometers will provide system sensitivities of 4.2 and 3.1 micro K_cmb rt s at 100 and 150 GHz, respectively. A rotating half-wave plate will modulate the polarization sensitivity of each telescope, controlling systematics. Bolometer arrays operating at 225 GHz and 275 GHz will allow removal of polarized galactic foregrounds. In a 2-6 day first flight from Alice Springs, Australia in 2010, Spider will map 50% of the sky to a depth necessary to improve our knowledge of the reionization optical depth by a large factor.

B. P. Crill; P. A. R. Ade; E. S. Battistelli; S. Benton; R. Bihary; J. J. Bock; J. R. Bond; J. Brevik; S. Bryan; C. R. Contaldi; O. Dore; M. Farhang; L. Fissel; S. R. Golwala; M. Halpern; G. Hilton; W. Holmes; V. V. Hristov; K. Irwin; W. C. Jones; C. L. Kuo; A. E. Lange; C. Lawrie; C. J. MacTavish; T. G. Martin; P. Mason; T. E. Montroy; C. B. Netterfield; E. Pascale; D. Riley; J. E. Ruhl; M. C. Runyan; A. Trangsrud; C. Tucker; A. Turner; M. Viero; D. Wiebe

2008-07-09T23:59:59.000Z

239

Improved Bounds for Large Scale Capacitated Arc Routing Problem  

E-Print Network [OSTI]

ply a modified Iterated Local Search procedure to Capacitated Vehicle .... enter and leave the set S, in such a way that at least 2k(S) ? |?R(S)| times an ...... algorithm clearly outperformed, in terms of solution quality, those that dealt with large.

2011-09-29T23:59:59.000Z

240

Including Variability in Large-Scale Cluster Power Models  

E-Print Network [OSTI]

, mobile (laptop), desktop, and server processor spac- es, reflecting energy-efficient server.rivoire@sonoma.edu University of CA, Santa Cruz3 eka@soe.ucsc.edu Abstract--Studying the energy efficiency of large five-node clusters using embedded, laptop, desktop, and server processors. The variation is manifested

Rivoire, Suzanne

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

How Regulatory Policy Impacts Large Scale Cogeneration Facilities  

E-Print Network [OSTI]

.e states have set prices to be paid by the utilities to alternative energy suppliers, others have left the deter.ination of prices largely to negotiations between suppliers and the utilities. Until recently California had been an exa.ple of the for...

Smith, A. J. Jr.

242

Large-Scale Malaria Treatment in the Private Sector: A Case Study of the Cambodian Experience  

E-Print Network [OSTI]

in 1993 to address child survival (safe water and diarrhea treatment), HIV/AIDS, ma- lariaLarge-Scale Malaria Treatment in the Private Sector: A Case Study of the Cambodian Experience #12;#12;Large-Scale Malaria Treatment in the Private Sector: A Case Study of the Cambodian Experience #12

Klein, Ophir

243

Impacts of Large-Scale Wind Generators Penetration on the Voltage Stability of Power Systems  

E-Print Network [OSTI]

development of wind energy tech- nology and the current world-wide status of grid-connected as well as standImpacts of Large-Scale Wind Generators Penetration on the Voltage Stability of Power Systems M. J systems and their dynamic behaviours to identify critical issues that limit the large-scale integration

Pota, Himanshu Roy

244

ORNL/TM-2011/455 Large Scale Duty Cycle (LSDC) Project  

E-Print Network [OSTI]

ORNL/TM-2011/455 Large Scale Duty Cycle (LSDC) Project: Tractive Energy Analysis Methodology and Results from Long-Haul Truck Drive Cycle Evaluations May 2011 Prepared by Tim LaClair #12;#12;ORNL/TM-2011/455 Energy and Transportation Science Division LARGE SCALE DUTY CYCLE (LSDC) PROJECT: TRACTIVE ENERGY

245

Optimal Selection of AC Cables for Large Scale Offshore Wind Farms  

E-Print Network [OSTI]

Optimal Selection of AC Cables for Large Scale Offshore Wind Farms Peng Hou, Weihao Hu, Zhe Chen@et.aau.dk, whu@iet.aau.dk, zch@iet.aau.dk Abstract--The investment of large scale offshore wind farms is high the operational requirements of the offshore wind farms and the connected power systems. In this paper, a new cost

Hu, Weihao

246

Autonomous and Energy-Aware Management of Large-Scale Cloud Infrastructures  

E-Print Network [OSTI]

Autonomous and Energy-Aware Management of Large-Scale Cloud Infrastructures Eugen Feller Advisor.e. self-organization and healing); (3) energy-awareness. However, existing open-source cloud management, and energy-aware resource management frameworks for large-scale cloud infrastructures. Particularly, a novel

Paris-Sud XI, Université de

247

LARGE-SCALE MOVEMENT PATTERNS OF MALE LOGGERHEAD SEA TURTLES (CARETTA CARETTA)  

E-Print Network [OSTI]

LARGE-SCALE MOVEMENT PATTERNS OF MALE LOGGERHEAD SEA TURTLES (CARETTA CARETTA) IN SHARK BAY Management Title of Thesis: Large-Scale Movement Patterns of Male Loggerhead Sea Turtles (Caretta caretta) in Shark Bay, Australia Report No. 524 Examining Committee: Chair: Christine Gruman Master of Resource

248

SEQUENCING TECHNOLOGIES Microdroplet-based PCR enrichment for large-scale  

E-Print Network [OSTI]

SEQUENCING TECHNOLOGIES Microdroplet-based PCR enrichment for large-scale targeted sequencing.1126/science.1181498) Genome sequencing for large-scale population-based studies requires technologies generated in this study is expected to be a useful resource for examining the molecular characteristics

Rosenberg, Noah

249

Harvesting Clean Energy How California Can Deploy Large-Scale Renewable  

E-Print Network [OSTI]

Harvesting Clean Energy How California Can Deploy Large-Scale Renewable Energy Projects Harvesting Clean Energy: How California Can Deploy Large-Scale Renewable Energy Projects on Appropriate acres of impaired lands in the Westlands Water District in the Central Valley may soon have

Kammen, Daniel M.

250

Large Scale Wind Turbine Siting Map Report NJ Department of Environmental Protection  

E-Print Network [OSTI]

Large Scale Wind Turbine Siting Map Report NJ Department of Environmental Protection September 8 Jersey Department of Environmental Protection's (NJDEP) "Large Scale Wind Turbine Siting Map Management rules to address the development and permitting of wind turbines in the coastal zone

Holberton, Rebecca L.

251

Room-temperature stationary sodium-ion batteries for large-scale electric energy storage  

E-Print Network [OSTI]

energy and utility applications, such as pump hydro, compressed air, y-wheel and electrochemicalRoom-temperature stationary sodium-ion batteries for large-scale electric energy storage Huilin Pan attention particularly in large- scale electric energy storage applications for renewable energy and smart

Wang, Wei Hua

252

Evaluating the Potential for Large-Scale Biodiesel Deployments in a Global Context  

E-Print Network [OSTI]

Evaluating the Potential for Large-Scale Biodiesel Deployments in a Global Context by Matthew Johnston. All rights reserved. #12;#12;Evaluating the Potential for Large-Scale Biodiesel Deployments on the subject of biodiesel, but I can only hope she takes comfort knowing now much I appreciate everything she

Wisconsin at Madison, University of

253

U.S. Energy Infrastructure Investment: Large-Scale Integrated Smart Grid  

E-Print Network [OSTI]

U.S. Energy Infrastructure Investment: Large-Scale Integrated Smart Grid Solutions with High: LargeScale Integrated Smart Grid Solutions with High Penetration of Renewable Resources, Dispersed- ing electricity grid. Much attention is being given to smart grid development in the U.S. and around

254

A Study of the Coverage of Large-scale Sensor Benyuan Liu  

E-Print Network [OSTI]

networks. I. INTRODUCTION Advances in micro-sensor and communication technologies have made it possibleA Study of the Coverage of Large-scale Sensor Networks Benyuan Liu Department of Computer Science study the coverage properties of large-scale sensor networks. Three coverage measures are defined

Liu, Benyuan

255

A Topological Framework for the Interactive Exploration of Large Scale Turbulent Combustion  

E-Print Network [OSTI]

A Topological Framework for the Interactive Exploration of Large Scale Turbulent Combustion Peer a new topological framework for the analysis of large scale, time-varying, turbulent combustion consumption thresh- olds for an entire time-dependent combustion simulation. By computing augmented merge

Knowles, David William

256

Evaluation of Segmentation Techniques for Inventory Management in Large Scale Multi-Item Inventory Systems1  

E-Print Network [OSTI]

1 Evaluation of Segmentation Techniques for Inventory Management in Large Scale Multi-Item Inventory Systems1 Manuel D. Rossetti2 , Ph. D., P. E. Department of Industrial Engineering University of their inventory policies in a large-scale multi-item inventory system. Conventional inventory segmentation

Rossetti, Manuel D.

257

Towards Automatic Incorporation of Search engines into a Large-Scale Metasearch Engine  

E-Print Network [OSTI]

Towards Automatic Incorporation of Search engines into a Large-Scale Metasearch Engine Zonghuan Wu. of Computer Science Univ. of Illinois at Chicago yu@cs.uic.edu Abstract A metasearch engine supports unified access to multiple component search engines. To build a very large-scale metasearch engine that can

Meng, Weiyi

258

Large-Scale Integration of Deferrable Demand and Renewable Energy Sources  

E-Print Network [OSTI]

1 Large-Scale Integration of Deferrable Demand and Renewable Energy Sources Anthony Papavasiliou. In order to accurately assess the impacts of renewable energy integration and demand response integration model for assessing the impacts of the large-scale integration of renewable energy sources

Oren, Shmuel S.

259

Introduction Large-scale circulation Clouds Conclusions European temperature extremes in CMIP5  

E-Print Network [OSTI]

Introduction Large-scale circulation Clouds Conclusions European temperature extremes in CMIP5 extremes in CMIP5 EUCLIPSE ­ May 2012 ­ Paris #12;Introduction Large-scale circulation Clouds Conclusions Introduction Objectives European temperature extremes: understand model biases & uncertainties under future

Ribes, Aurélien

260

QA-Pagelet: Data Preparation Techniques for Large-Scale Data Analysis of the Deep Web  

E-Print Network [OSTI]

QA-Pagelet: Data Preparation Techniques for Large-Scale Data Analysis of the Deep Web James the QA-Pagelet as a fundamental data preparation technique for large-scale data analysis of the Deep Web-Pagelets from the Deep Web. Two unique features of the Thor framework are 1) the novel page clustering

Caverlee, James

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

QA-Pagelet: Data Preparation Techniques for Large Scale Data Analysis of the Deep Web  

E-Print Network [OSTI]

1 QA-Pagelet: Data Preparation Techniques for Large Scale Data Analysis of the Deep Web James data preparation technique for large scale data analysis of the Deep Web. To support QA the Deep Web. Two unique features of the Thor framework are (1) the novel page clustering for grouping

Liu, Ling

262

Large-scale well aligned carbon nitride nanotube films: Low temperature growth and electron field emission  

E-Print Network [OSTI]

Large-scale well aligned carbon nitride nanotube films: Low temperature growth and electron field emission Dingyong Zhong, Shuang Liu, Guangyu Zhang, and E. G. Wanga) State Key Laboratory for Surface Received 2 January 2001; accepted for publication 13 March 2001 Large-scale well aligned carbon nitride

Zhang, Guangyu

263

3rd Annual National CHP Roadmap Workshop CHP and DER for Federal Facilities  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from theDepartment(October-December 2013Lamps;5SUMMARIES | Department of10EPA CHP

264

Large Scale Structure of the Universe: Current Problems  

E-Print Network [OSTI]

The mean power spectrum of galaxies is compared with theoretical models. Possibilities to explain the observed power spectrum are discussed. Superclusters and voids form a quasi-regular lattice of mean cell size 120 Mpc; the main axis of the lattice is directed toward the supergalactic Y coordinate. Principal conclusions are that on scales around 100 Mpc the Universe is neither homogeneous nor isotropic and that some of the presently accepted cosmological paradigms need revision if the available observational data represent a fair sample of the Universe.

J. Einasto

1999-09-26T23:59:59.000Z

265

Non-Stationary Random Process for Large-Scale Failure and Recovery of Power Distributions  

E-Print Network [OSTI]

A key objective of the smart grid is to improve reliability of utility services to end users. This requires strengthening resilience of distribution networks that lie at the edge of the grid. However, distribution networks are exposed to external disturbances such as hurricanes and snow storms where electricity service to customers is disrupted repeatedly. External disturbances cause large-scale power failures that are neither well-understood, nor formulated rigorously, nor studied systematically. This work studies resilience of power distribution networks to large-scale disturbances in three aspects. First, a non-stationary random process is derived to characterize an entire life cycle of large-scale failure and recovery. Second, resilience is defined based on the non-stationary random process. Close form analytical expressions are derived under specific large-scale failure scenarios. Third, the non-stationary model and the resilience metric are applied to a real life example of large-scale disruptions due t...

Wei, Yun; Galvan, Floyd; Couvillon, Stephen; Orellana, George; Momoh, James

2012-01-01T23:59:59.000Z

266

Probing the imprint of interacting dark energy on very large scales  

E-Print Network [OSTI]

The observed galaxy power spectrum acquires relativistic corrections from lightcone effects, and these corrections grow on very large scales. Future galaxy surveys in optical, infrared and radio bands will probe increasingly large wavelength modes and reach higher redshifts. In order to exploit the new data on large scales, an accurate analysis requires inclusion of the relativistic effects. This is especially the case for primordial non-Gaussianity and for extending tests of dark energy models to horizon scales. Here we investigate the latter, focusing on models where the dark energy interacts non-gravitationally with dark matter. Interaction in the dark sector can also lead to large-scale deviations in the power spectrum. If the relativistic effects are ignored, the imprint of interacting dark energy will be incorrectly identified and thus lead to a bias in constraints on interacting dark energy on very large scales.

Duniya, Didam; Maartens, Roy

2015-01-01T23:59:59.000Z

267

Impacts of Increasing Natural Gas Fueled CHP from 20 to 35 Percent...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Impacts of Increasing Natural Gas Fueled CHP from 20 to 35 Percent of Total Electricity Production in Texas, April 2011 Impacts of Increasing Natural Gas Fueled CHP from 20 to 35...

268

Data Collection and Analyses of the CHP System at Eastern Maine...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Data Collection and Analyses of the CHP System at Eastern Maine Medical Center - Final Report, June 2008 Data Collection and Analyses of the CHP System at Eastern Maine Medical...

269

A Preliminary Study on Designing Combined Heat and Power (CHP) System for the University Environment  

E-Print Network [OSTI]

Combined heat and power (CHP) systems are an evolving technology that is at the front of the energy conservation movement. With the reduction in energy consumption and green house gas emissions, CHP systems are improving the efficiency of power...

Kozman, T. A.; Reynolds, C. M.; Lee, J.

2008-01-01T23:59:59.000Z

270

The Center for Health Policy (CHP) works with institutional partners at the local, state,  

E-Print Network [OSTI]

Mission The Center for Health Policy (CHP) works with institutional partners at the local, state into effective policies. The CHP sees research as an integral component of its mission. Center faculty engage

Grishok, Alla

271

Cryogenic Control Architecture for Large-Scale Quantum Computing  

E-Print Network [OSTI]

Solid-state qubits have recently advanced to the level that enables them, in-principle, to be scaled-up into fault-tolerant quantum computers. As these physical qubits continue to advance, meeting the challenge of realising a quantum machine will also require the engineering of new classical hardware and control architectures with complexity far beyond the systems used in today's few-qubit experiments. Here, we report a micro-architecture for controlling and reading out qubits during the execution of a quantum algorithm such as an error correcting code. We demonstrate the basic principles of this architecture in a configuration that distributes components of the control system across different temperature stages of a dilution refrigerator, as determined by the available cooling power. The combined setup includes a cryogenic field-programmable gate array (FPGA) controlling a switching matrix at 20 millikelvin which, in turn, manipulates a semiconductor qubit.

J. M. Hornibrook; J. I. Colless; I. D. Conway Lamb; S. J. Pauka; H. Lu; A. C. Gossard; J. D. Watson; G. C. Gardner; S. Fallahi; M. J. Manfra; D. J. Reilly

2014-09-08T23:59:59.000Z

272

Large Scales - Long Times: Adding High Energy Resolution to SANS  

E-Print Network [OSTI]

The Neutron Spin Echo (NSE) variant MIEZE (Modulation of IntEnsity by Zero Effort), where all beam manipulations are performed before the sample position, offers the possibility to perform low background SANS measurements in strong magnetic fields and depolarising samples. However, MIEZE is sensitive to differences \\DeltaL in the length of neutron flight paths through the instrument and the sample. In this article, we discuss the major influence of \\DeltaL on contrast reduction of MIEZE measurements and its minimisation. Finally we present a design case for enhancing a small-angle neutron scattering (SANS) instrument at the planned European Spallation Source (ESS) in Lund, Sweden, using a combination of MIEZE and other TOF options, such as TISANE offering time windows from ns to minutes. The proposed instrument allows studying fluctuations in depolarizing samples, samples exposed to strong magnetic fields, and spin-incoherently scattering samples in a straightforward way up to time scales of \\mus at momentum ...

Brandl, G; Häußler, W; Mühlbauer, S; Böni, P

2011-01-01T23:59:59.000Z

273

Large-Scale Molecular Dynamics Simulations for Highly Parallel Infrastructures  

E-Print Network [OSTI]

Computational chemistry allows researchers to experiment in sillico: by running a computer simulations of a biological or chemical processes of interest. Molecular dynamics with molecular mechanics model of interactions simulates N-body problem of atoms$-$it computes movements of atoms according to Newtonian physics and empirical descriptions of atomic electrostatic interactions. These simulations require high performance computing resources, as evaluations within each step are computationally demanding and billions of steps are needed to reach interesting timescales. Current methods decompose the spatial domain of the problem and calculate on parallel/distributed infrastructures. Even the methods with the highest strong scaling hit the limit at half a million cores: they are not able to cut the time to result if provided with more processors. At the dawn of exascale computing with massively parallel computational resources, we want to increase the level of parallelism by incorporating parallel-in-time comput...

Pazúriková, Jana

2014-01-01T23:59:59.000Z

274

Large Scale Computing and Storage Requirements for High Energy Physics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 CERN 73-11Large areaLargefor High Energy

275

Large-Scale Multiplexed Quantitative Discovery Proteomics Enabled by the  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 CERN 73-11Large areaLargefor HighDepartment

276

CHP Fuel Cell Durability Demonstration - Final Report  

SciTech Connect (OSTI)

Plug Power has managed a demonstration project that has tested multiple units of its high-temperature, PEM fuel cell system in micro-combined heat and power (?-CHP) applications in California. The specific objective of the demonstration project was to substantiate the durability of GenSys Blue, and, thereby, verify its technology and commercial readiness for the marketplace. In the demonstration project, Plug Power, in partnership with the National Fuel Cell Research Center (NFCRC) at the University of California, Irvine (UCI), and Sempra, will execute two major tasks: • Task 1: Internal durability/reliability fleet testing. Six GenSys Blue units will be built and will undergo an internal test regimen to estimate failure rates. This task was modified to include 3 GenSys Blue units installed in a lab at UCI. • Task 2: External customer testing. Combined heat and power units will be installed and tested in real-world residential and/or light commercial end user locations in California.

Petrecky, James; Ashley, Christopher J

2014-07-21T23:59:59.000Z

277

Feasibility of Large-Scale Ocean CO2 Sequestration  

SciTech Connect (OSTI)

Scientific knowledge of natural clathrate hydrates has grown enormously over the past decade, with spectacular new findings of large exposures of complex hydrates on the sea floor, the development of new tools for examining the solid phase in situ, significant progress in modeling natural hydrate systems, and the discovery of exotic hydrates associated with sea floor venting of liquid CO{sub 2}. Major unresolved questions remain about the role of hydrates in response to climate change today, and correlations between the hydrate reservoir of Earth and the stable isotopic evidence of massive hydrate dissociation in the geologic past. The examination of hydrates as a possible energy resource is proceeding apace for the subpermafrost accumulations in the Arctic, but serious questions remain about the viability of marine hydrates as an economic resource. New and energetic explorations by nations such as India and China are quickly uncovering large hydrate findings on their continental shelves. In this report we detail research carried out in the period October 1, 2007 through September 30, 2008. The primary body of work is contained in a formal publication attached as Appendix 1 to this report. In brief we have surveyed the recent literature with respect to the natural occurrence of clathrate hydrates (with a special emphasis on methane hydrates), the tools used to investigate them and their potential as a new source of natural gas for energy production.

Peter Brewer

2008-08-31T23:59:59.000Z

278

Edit paper Methods for Large Scale Hydraulic Fracture Monitoring  

E-Print Network [OSTI]

In this paper we propose computationally efficient and robust methods for estimating the moment tensor and location of micro-seismic event(s) for large search volumes. Our contribution is two-fold. First, we propose a novel joint-complexity measure, namely the sum of nuclear norms which while imposing sparsity on the number of fractures (locations) over a large spatial volume, also captures the rank-1 nature of the induced wavefield pattern. This wavefield pattern is modeled as the outer-product of the source signature with the amplitude pattern across the receivers from a seismic source. A rank-1 factorization of the estimated wavefield pattern at each location can therefore be used to estimate the seismic moment tensor using the knowledge of the array geometry. In contrast to existing work this approach allows us to drop any other assumption on the source signature. Second, we exploit the recently proposed first-order incremental projection algorithms for a fast and efficient implementation of the resulting...

Ely, Gregory

2013-01-01T23:59:59.000Z

279

Monitoring and Commissioning Verification Algorithms for CHP Systems  

SciTech Connect (OSTI)

This document provides the algorithms for CHP system performance monitoring and commissioning verification (CxV). It starts by presenting system-level and component-level performance metrics, followed by descriptions of algorithms for performance monitoring and commissioning verification, using the metric presented earlier. Verification of commissioning is accomplished essentially by comparing actual measured performance to benchmarks for performance provided by the system integrator and/or component manufacturers. The results of these comparisons are then automatically interpreted to provide conclusions regarding whether the CHP system and its components have been properly commissioned and where problems are found, guidance is provided for corrections. A discussion of uncertainty handling is then provided, which is followed by a description of how simulations models can be used to generate data for testing the algorithms. A model is described for simulating a CHP system consisting of a micro-turbine, an exhaust-gas heat recovery unit that produces hot water, a absorption chiller and a cooling tower. The process for using this model for generating data for testing the algorithms for a selected set of faults is described. The next section applies the algorithms developed to CHP laboratory and field data to illustrate their use. The report then concludes with a discussion of the need for laboratory testing of the algorithms on a physical CHP systems and identification of the recommended next steps.

Brambley, Michael R.; Katipamula, Srinivas; Jiang, Wei

2008-03-31T23:59:59.000Z

280

chp/pcor center for health policy/ center for primary care  

E-Print Network [OSTI]

chp/pcor center for health policy/ center for primary care and outcomes research center overview historicalhighlights 6 Education 12 research 20 Impact 24 outreach 28 Supportingchp/pcor 30 people chp/pcor mission investigators. outreach Over the past decade, CHP/PCOR has pro- duced 25 newsletters, organized nearly 300

Ford, James

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Formal Verification of CHP Specifications with CADP Illustration on an Asynchronous Network-on-Chip  

E-Print Network [OSTI]

Formal Verification of CHP Specifications with CADP Illustration on an Asynchronous Network in the high-level language CHP, by using model checking techniques provided by the CADP toolbox. Our proposal is based on an automatic translation from CHP into LOTOS, the process algebra used in CADP. A translator

Joseph Fourier Grenoble-I, Université

282

ICEPT Working Paper Comparison of Fuel Cell and Combustion Micro-CHP under Future Residential  

E-Print Network [OSTI]

ICEPT Working Paper Comparison of Fuel Cell and Combustion Micro-CHP under Future Residential and Combustion Micro-CHP under Future Residential Energy Demand Scenarios A.D. Hawkes2 and M.A. Leach Centre heat and power (micro-CHP) - a technology to provide heat and some electricity to individual

283

Formal Verification of CHP Specifications with CADP, Illustration on an Asynchronous Network-on-Chip  

E-Print Network [OSTI]

Formal Verification of CHP Specifications with CADP, Illustration on an Asynchronous Network of the Presentation · Introduction · Translation from CHP to LOTOS · CADP toolbox overview · Verification of ANOC Context & Objective process calculus CHP Petri nets process calculus LOTOS (CEA/Leti) translation

Joseph Fourier Grenoble-I, Université

284

Design and evaluation of large scale pultruded fiberglass tubular structures  

SciTech Connect (OSTI)

Large solid wood structures have been used in structural applications such as utility poles and marine pilings for a long time. A pultruded fiberglass reinforced polymer composite utility pole has been designed by the Composite Power Corporation of Las Vegas, Nevada which meets or exceeds the wood pole strength standards. This type of pole has many advantages over traditional wood, metal or concrete poles including: lighter weight, easier to climb and service, better dielectric and fire resistance properties, and it is more environmentally sound than treated wood poles. Utility crossarms, other attachments, and climbing devices are secured to grooves which run the entire length of the pole so there is no need to drill holes or wear spiked boots which would compromise the strength of the pole. Bending and torsion experiments have been conducted to determine if the present design meets the strength requirements of a forty foot Class one wood pole. Initial results of the composite pole tests showed a 17 percent advantage in bending strength, a 449 percent advantage in strength due to a vertical load applied to a crossarm, and a 43 percent advantage in twisting strength. Plans for further material characterization experiments and detailed stress and failure analysis are discussed.

O`Toole, B.J. [Univ. of Nevada, Las Vegas, NV (United States). Mechanical Engineering Department

1994-12-31T23:59:59.000Z

285

Method for large-scale fabrication of atomic-scale structures on material surfaces using surface vacancies  

DOE Patents [OSTI]

A method for forming atomic-scale structures on a surface of a substrate on a large-scale includes creating a predetermined amount of surface vacancies on the surface of the substrate by removing an amount of atoms on the surface of the material corresponding to the predetermined amount of the surface vacancies. Once the surface vacancies have been created, atoms of a desired structure material are deposited on the surface of the substrate to enable the surface vacancies and the atoms of the structure material to interact. The interaction causes the atoms of the structure material to form the atomic-scale structures.

Lim, Chong Wee (Urbana, IL); Ohmori, Kenji (Urbana, IL); Petrov, Ivan Georgiev (Champaign, IL); Greene, Joseph E. (Champaign, IL)

2004-07-13T23:59:59.000Z

286

MMR: A Platform for Large-Scale Forensic Computing Vassil Roussev, Liqiang Wang, Golden G. Richard III, Lodovico Marziale  

E-Print Network [OSTI]

ii MMR: A Platform for Large-Scale Forensic Computing Vassil Roussev, Liqiang Wang, Golden G-SCALE FORENSIC COMPUTING Middleware Support for MapReduce Processing Abstract The timely processing of large-scale digital forensic targets demands the empoyment of large-scale distributed resources, as well

Richard III, Golden G.

287

Sector Profiles of Significant Large CHP Markets, March 2004 | Department  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage » SearchEnergyDepartment of Energy Moniz: WhatM-1 Section J Appendix Mof

288

The role of large-scale, extratropical dynamics in climate change  

SciTech Connect (OSTI)

The climate modeling community has focused recently on improving our understanding of certain processes, such as cloud feedbacks and ocean circulation, that are deemed critical to climate-change prediction. Although attention to such processes is warranted, emphasis on these areas has diminished a general appreciation of the role played by the large-scale dynamics of the extratropical atmosphere. Lack of interest in extratropical dynamics may reflect the assumption that these dynamical processes are a non-problem as far as climate modeling is concerned, since general circulation models (GCMs) calculate motions on this scale from first principles. Nevertheless, serious shortcomings in our ability to understand and simulate large-scale dynamics exist. Partly due to a paucity of standard GCM diagnostic calculations of large-scale motions and their transports of heat, momentum, potential vorticity, and moisture, a comprehensive understanding of the role of large-scale dynamics in GCM climate simulations has not been developed. Uncertainties remain in our understanding and simulation of large-scale extratropical dynamics and their interaction with other climatic processes, such as cloud feedbacks, large-scale ocean circulation, moist convection, air-sea interaction and land-surface processes. To address some of these issues, the 17th Stanstead Seminar was convened at Bishop`s University in Lennoxville, Quebec. The purpose of the Seminar was to promote discussion of the role of large-scale extratropical dynamics in global climate change. Abstracts of the talks are included in this volume. On the basis of these talks, several key issues emerged concerning large-scale extratropical dynamics and their climatic role. Individual records are indexed separately for the database.

Shepherd, T.G. [ed.

1994-02-01T23:59:59.000Z

289

CHP REGIONAL APPLICATION CENTERS: ACTIVITIES AND SELECTED RESULTS  

SciTech Connect (OSTI)

Between 2001 and 2005, the U.S. Department of Energy (DOE) created a set of eight Regional Application Centers (RACs) to facilitate the development and deployment of Combined Heat and Power (CHP) technologies. By utilizing the thermal energy that is normally wasted when electricity is produced at central generating stations, Combined Heat and Power installations can save substantial amounts of energy compared to more traditional technologies. In addition, the location of CHP facilities at or near the point of consumption greatly reduces or eliminates electric transmission and distribution losses. The regional nature of the RACs allows each one to design and provide services that are most relevant to the specific economic and market conditions in its particular geographic area. Between them, the eight RACs provide services to all 50 states and the District of Columbia. Through the end of the federal 2009 fiscal year (FY 2009), the primary focus of the RACs was on providing CHP-related information to targeted markets, encouraging the creation and adoption of public policies and incentives favorable to CHP, and providing CHP users and prospective users with technical assistance and support on specific projects. Beginning with the 2010 fiscal year, the focus of the regional centers broadened to include district energy and waste heat recovery and these entities became formally known as Clean Energy Application Centers, as required by the Energy Independence and Security Act (EISA) of 2007. In 2007, ORNL led a cooperative effort to establish metrics to quantify the RACs accomplishments. That effort began with the development of a detailed logic model describing RAC operations and outcomes, which provided a basis for identifying important activities and accomplishments to track. A data collection spreadsheet soliciting information on those activities for FY 2008 and all previous years of RAC operations was developed and sent to the RACs in the summer of 2008. This represents the first systematic attempt at RAC program measurement in a manner consistent with approaches used for other efforts funded by DOE's Industrial Technologies Program (ITP). In addition, data on CHP installations and associated effects were collected for the same years from a state-by-state database maintained for DOE by ICF international. A report documenting the findings of that study was produced in September, 2009. The purpose of the current report is to present the findings from a new study of RAC activities and accomplishments which examined what the Centers did in FY 2009, the last year in which they concentrated exclusively on CHP technologies. This study focused on identifying and describing RAC activities and was not designed to measure how those efforts influenced CHP installations or other outcomes.

Schweitzer, Martin [ORNL

2010-08-01T23:59:59.000Z

290

Islanded house operation using a micro CHP Albert Molderink, Vincent Bakker, Johann L. Hurink, Gerard J.M. Smit  

E-Print Network [OSTI]

1 Islanded house operation using a micro CHP Albert Molderink, Vincent Bakker, Johann L. Hurink, The Netherlands email: a.molderink@utwente.nl Abstract-- The µCHP is expected as the successor of the conventional. A µCHP appliance saves money and reduces greenhouse gas emission. An additional functionality of the µCHP

Al Hanbali, Ahmad

291

Network Integration of CHP or It's the Network, Stupid! Dr Gareth P. Harrison and Dr A. Robin Wallace  

E-Print Network [OSTI]

Network Integration of CHP or It's the Network, Stupid! Dr Gareth P. Harrison and Dr A. Robin. The European Union CHP Directive requires EU member states to have at least 18% CHP by 2012 and the UK target, CHP is mainly connected to medium or low voltage electrical distribution networks as distributed

Harrison, Gareth

292

Census: Location-Aware Membership Management for Large-Scale Distributed Systems  

E-Print Network [OSTI]

We present Census, a platform for building large-scale distributed applications. Census provides a membership service and a multicast mechanism. The membership service provides every node with a consistent view of the ...

Cowling, James Alexander

293

Modeling and Analysis of Large-Scale On-Chip Interconnects  

E-Print Network [OSTI]

in computer aided design areas. This dissertation presents new methodologies for addressing the above two important challenging issues for large scale on-chip interconnect modeling and analysis: In the past, the standard statistical circuit modeling techniques...

Feng, Zhuo

2010-07-14T23:59:59.000Z

294

E-Print Network 3.0 - air reveals large-scale Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Reduce PS,1,1,0,Pa, surface... 12;LargeScale Data Analytics beyond MapReduce Text Mining in the Biosciences Cleansing ... Source: Swedish Institute of Computer Science,...

295

Large-Scale Identification of Single-Feature Polymorphisms in Complex Genomes  

E-Print Network [OSTI]

Large-Scale Identification of Single-Feature Polymorphisms in Complex Genomes Justin O. Borevitz,1 hybridization can be combined with bulk segregant analysis to quickly map mutations. The extension

Kihara, Daisuke

296

Programmable window : a large-scale transparent electronic display using SPD film  

E-Print Network [OSTI]

This research demonstrates that Suspended Particle Device (SPD) film is a viable option for the development of large-scale transparent display systems. The thesis analyzes the SPD film from an architectural display application ...

Ramos, Martin (Ramos Rizo-Patron)

2004-01-01T23:59:59.000Z

297

LARGE SCALE PERMEABILITY TEST OF THE GRANITE IN THE STRIPA MINE AND THERMAL CONDUCTIVITY TEST  

E-Print Network [OSTI]

No.2 LARGE SCALE PERMEABILITY TEST OF THE GRANITE' IN THEMINE AND, THERMAL CONDUCTIVITY TEST Lars Lundstrom and HakanSUMMARY REPORT Background TEST SITE Layout of test places

Lundstrom, L.

2011-01-01T23:59:59.000Z

298

Chemical engineers design, control and optimize large-scale chemical, physicochemical and  

E-Print Network [OSTI]

, Biochemical, Environmental, Petroleum Engineering and Nantoechnology. CHEMICAL&MATERIALSSCIENCE CHE OVERVIEW of Science 131 units · Chemical Engineering (Petroleum) Bachelor of Science 136 units · Chemical Engineering38 Chemical engineers design, control and optimize large-scale chemical, physicochemical

Rohs, Remo

299

The Association of Large-Scale Climate Variability and Teleconnections on Wind Energy Resource  

E-Print Network [OSTI]

The Association of Large-Scale Climate Variability and Teleconnections on Wind Energy Resource over on Wind Energy Resource over Europe and its Intermittency Pascal Kriesche* and Adam Schlosser* Abstract

300

Large scale oceanic circulation and fluxes of freshwater, heat, nutrients and oxygen  

E-Print Network [OSTI]

A new, global inversion is used to estimate the large scale oceanic circulation based on the World Ocean Circulation Experiment and Java Australia Dynamic Experiment hydrographic data. A linear inverse "box" model is used ...

Ganachaud, Alexandre Similien, 1970-

2000-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

A Warm-Start Approach for Large-Scale Stochastic Linear Programs  

E-Print Network [OSTI]

Aug 29, 2006 ... A Warm-Start Approach for Large-Scale Stochastic Linear Programs ... so that it can be seen as a structure-exploiting initial point generator.

Marco Colombo

2006-08-29T23:59:59.000Z

302

Membraneless hydrogen bromine laminar flow battery for large-scale energy storage  

E-Print Network [OSTI]

Electrochemical energy storage systems have been considered for a range of potential large-scale energy storage applications. These applications vary widely, both in the order of magnitude of energy storage that is required ...

Braff, William Allan

2014-01-01T23:59:59.000Z

303

Potential Climatic Impacts and Reliability of Very Large-Scale Wind Farms  

E-Print Network [OSTI]

Meeting future world energy needs while addressing climate change requires large-scale deployment of low or zero greenhouse gas (GHG) emission technologies such as wind energy. The widespread availability of wind power has ...

Wang, Chien

304

Solar Power in the Desert: Are the current large-scale solar developments really improving California’s environment?  

E-Print Network [OSTI]

large scale solar developments in California will impactpoorly placed solar arrays in California leads to the losslarge-scale solar developments really improving California’s

Allen, Michael F.; McHughen, Alan

2011-01-01T23:59:59.000Z

305

Environmental geophysics deals with issues ranging from local-scale fluid-rock changes to large-scale climatic  

E-Print Network [OSTI]

Environmental geophysics deals with issues ranging from local-scale fluid-rock changes to large and quarries, military bases, oil and gas fields, petroleum refineries, etc. Many derelict sites such as crankcase oils), mine spoils, and other inorganic pollutants. Accidental spills or poor disposal practice

Meju, Max

306

Large-scale biomass plantings in Minnesota: Scale-up and demonstration projects in perspective  

SciTech Connect (OSTI)

Scale-up projects are an important step toward demonstration and commercialization of woody biomass because simply planting extensive acreage of hybrid poplar will not develop markets. Project objectives are to document the cost to plant and establish, and effort needed to monitor and maintain woody biomass on agricultural land. Conversion technologies and alternative end-uses are examined in a larger framework in order to afford researchers and industrial partners information necessary to develop supply and demand on a local or regional scale. Likely to be determined are risk factors of crop failure and differences between establishment of research plots and agricultural scale field work. Production economics are only one consideration in understanding demonstration and scale-up. Others are environmental, marketing, industrial, and agricultural in nature. Markets for energy crops are only beginning to develop. Although information collected as a result of planting up to 5000 acres of hybrid poplar in central Minnesota will not necessarily be transferable to other areas of the country, a national perspective will come from development of regional markets for woody and herbaceous crops. Several feedstocks, with alternative markets in different regions will eventually comprise the entire picture of biofuels feedstock market development. Current projects offer opportunities to learn about the complexity and requirements that will move biomass from research and development to actual market development. These markets may include energy and other end-uses such as fiber.

Kroll, T. [Minnesota Univ., St. Paul, MN (United States). Forestry Div.; Downing, M. [Oak Ridge National Lab., TN (United States)

1995-09-01T23:59:59.000Z

307

Domain Controlled Architecture A New Approach for Large Scale Software Integrated Automotive Systems  

E-Print Network [OSTI]

Domain Controlled Architecture A New Approach for Large Scale Software Integrated Automotive Scale Software Integration, LSSI, Automotive Real Time, Multi-core, Many-core, Embedded Automo- tive mobility domain. The automotive in- dustry is confronted with a rising system complexity and several

Kühnhauser, Winfried

308

Large-Scale Analysis of Individual and Task Differences in Search Result Page Examination Strategies  

E-Print Network [OSTI]

Large-Scale Analysis of Individual and Task Differences in Search Result Page Examination users examine results which are similar to those observed in small-scale studies. Our findings have differences on search result page examination strategies is important in develop- ing improved search engines

Dumais, Susan

309

Actual trends of decentralized CHP integration -- The Californian investment subsidy system and its implication for the energy efficiency directive (Aktuelle Trends in der dezentralen KWK Technologie Integration -- Das kalifornische Fordermodell und dessen Implikation fur die Endenergieeffizienzrichtlinie)  

E-Print Network [OSTI]

http://www.epa.gov/chp/project_resources/calculator.htmVerbrennungsmotoren. Quelle: Midwest CHP Application Center,Mikroturbinen. Quelle: Midwest CHP Application Center, 2003

Stadler, Michael; Lipman, Tim; Marnay, Chris

2008-01-01T23:59:59.000Z

310

The use of combined heat and power (CHP) to reduce greenhouse gas emissions  

SciTech Connect (OSTI)

Cogeneration or Combined Heat and Power (CHP) is the sequential production of electric power and thermal energy. It is a more efficient way of providing electricity and process heat than producing them independently. Average overall efficiencies can range from 70% to more than 80%. CHP decisions often present an opportunity to switch to a cleaner fuel. CHP systems are an attractive opportunity to save money, increase overall efficiency, reduce net emissions, and improve environmental performance. Climate Wise, a US Environmental Protection Agency (US EPA) program helping industrial Partners turn energy efficiency and pollution prevention into a corporate asset, has increased awareness of CHP by providing implementation and savings information, providing peer exchange opportunities for its Partners, and recognizing the achievements of Partners that have implemented CHP at their facilities. This paper profiles Climate Wise Partners that have invested in CHP systems, including describing how CHP is used in their facilities and the resulting cost and emission reductions.

Asrael, J.; Milmoe, P.H.; Haydel, J.

1999-07-01T23:59:59.000Z

311

Nuclear EMP simulation for large-scale urban environments. FDTD for electrically large problems.  

SciTech Connect (OSTI)

In case of a terrorist nuclear attack in a metropolitan area, EMP measurement could provide: (1) a prompt confirmation of the nature of the explosion (chemical or nuclear) for emergency response; and (2) and characterization parameters of the device (reaction history, yield) for technical forensics. However, urban environment could affect the fidelity of the prompt EMP measurement (as well as all other types of prompt measurement): (1) Nuclear EMP wavefront would no longer be coherent, due to incoherent production, attenuation, and propagation of gamma and electrons; and (2) EMP propagation from source region outward would undergo complicated transmission, reflection, and diffraction processes. EMP simulation for electrically-large urban environment: (1) Coupled MCNP/FDTD (Finite-difference time domain Maxwell solver) approach; and (2) FDTD tends to be limited to problems that are not 'too' large compared to the wavelengths of interest because of numerical dispersion and anisotropy. We use a higher-order low-dispersion, isotropic FDTD algorithm for EMP propagation.

Smith, William S. [Los Alamos National Laboratory; Bull, Jeffrey S. [Los Alamos National Laboratory; Wilcox, Trevor [Los Alamos National Laboratory; Bos, Randall J. [Los Alamos National Laboratory; Shao, Xuan-Min [Los Alamos National Laboratory; Goorley, John T. [Los Alamos National Laboratory; Costigan, Keeley R. [Los Alamos National Laboratory

2012-08-13T23:59:59.000Z

312

A full-scale approximation of covariance functions for large spatial data sets  

E-Print Network [OSTI]

A full-scale approximation of covariance functions for large spatial data sets Huiyan Sang in spatial statistics but face tremendous computational challenges for very large data sets. The model fitting and spatial prediction of such models typically require O(n3 ) operations for a data set of size n

Huang, Jianhua

313

Facility Location under Demand Uncertainty: Response to a Large-scale Bioterror Attack  

E-Print Network [OSTI]

Facility Location under Demand Uncertainty: Response to a Large-scale Bioterror Attack Abstract In the event of a catastrophic bio-terror attack, major urban centers need to effi- ciently distribute large of a hypothetical anthrax attack in Los Angeles County. Keywords: Capacitated facility location, distance

Dessouky, Maged

314

Wind effects on large-scale buildings and structures : field measurements, wind tunnel tests and numerical prediction.  

E-Print Network [OSTI]

??Modern large-scale buildings and structures, such as super tall buildings and large roof structures, are usually constructed with innovative structural systems and high strength materials;… (more)

Fu, Jiyang (???)

2007-01-01T23:59:59.000Z

315

Measuring and tuning energy efficiency on large scale high performance computing platforms.  

SciTech Connect (OSTI)

Recognition of the importance of power in the field of High Performance Computing, whether it be as an obstacle, expense or design consideration, has never been greater and more pervasive. While research has been conducted on many related aspects, there is a stark absence of work focused on large scale High Performance Computing. Part of the reason is the lack of measurement capability currently available on small or large platforms. Typically, research is conducted using coarse methods of measurement such as inserting a power meter between the power source and the platform, or fine grained measurements using custom instrumented boards (with obvious limitations in scale). To collect the measurements necessary to analyze real scientific computing applications at large scale, an in-situ measurement capability must exist on a large scale capability class platform. In response to this challenge, we exploit the unique power measurement capabilities of the Cray XT architecture to gain an understanding of power use and the effects of tuning. We apply these capabilities at the operating system level by deterministically halting cores when idle. At the application level, we gain an understanding of the power requirements of a range of important DOE/NNSA production scientific computing applications running at large scale (thousands of nodes), while simultaneously collecting current and voltage measurements on the hosting nodes. We examine the effects of both CPU and network bandwidth tuning and demonstrate energy savings opportunities of up to 39% with little or no impact on run-time performance. Capturing scale effects in our experimental results was key. Our results provide strong evidence that next generation large-scale platforms should not only approach CPU frequency scaling differently, but could also benefit from the capability to tune other platform components, such as the network, to achieve energy efficient performance.

Laros, James H., III

2011-08-01T23:59:59.000Z

316

A Systematic Approach to the Design of a Large Scale Detritiation System for Controlled Thermonuclear Fusion Experiments  

E-Print Network [OSTI]

A Systematic Approach to the Design of a Large Scale Detritiation System for Controlled Thermonuclear Fusion Experiments

317

A membrane-free lithium/polysulfide semi-liquid battery for large-scale energy storage  

E-Print Network [OSTI]

A membrane-free lithium/polysulfide semi-liquid battery for large-scale energy storage Yuan Yang,a Guangyuan Zhengb and Yi Cui*ac Large-scale energy storage represents a key challenge for renewable energy develop a new lithium/ polysulfide (Li/PS) semi-liquid battery for large-scale energy storage

Cui, Yi

318

The IR-resummed Effective Field Theory of Large Scale Structures  

E-Print Network [OSTI]

We present a new method to resum the effect of large scale motions in the Effective Field Theory of Large Scale Structures. Because the linear power spectrum in $\\Lambda$CDM is not scale free the effects of the large scale flows are enhanced. Although previous EFT calculations of the equal-time density power spectrum at one and two loops showed a remarkable agreement with numerical results, they also showed a 2% residual which appeared related to the BAO oscillations. We show that this was indeed the case, explain the physical origin and show how a Lagrangian based calculation removes this differences. We propose a simple method to upgrade existing Eulerian calculations to effectively make them Lagrangian and compare the new results with existing fits to numerical simulations. Our new two-loop results agrees with numerical results up to $k\\sim 0.6 h/$Mpc to within 1% with no oscillatory residuals. We also compute power spectra involving momentum which is significantly more affected by the large scale flows. We show how keeping track of these velocities significantly enhances the UV reach of the momentum power spectrum in addition to removing the BAO related residuals. We compute predictions for the real space correlation function around the BAO scale and investigate its sensitivity to the EFT parameters and the details of the resummation technique.

Leonardo Senatore; Matias Zaldarriaga

2014-04-23T23:59:59.000Z

319

Inflation that runs naturally: Gravitational waves and suppression of power at large and small scales  

E-Print Network [OSTI]

We point out three correlated predictions of the axion monodromy inflation model: large amplitude of gravitational waves, suppression of power on horizon scales and on scales relevant for the formation of dwarf galaxies. While these predictions are likely generic to models with oscillations in the inflaton potential, the axion monodromy model naturally accommodates the required running spectral index through Planck-scale corrections to the inflaton potential. Applying this model to a combined data set of Planck, ACT, SPT, and WMAP low-$\\ell$ polarization cosmic microwave background (CMB) data, we find a best-fit tensor-to-scalar ratio $r_{0.05} = 0.07^{+0.05}_{-0.04}$ due to gravitational waves, which may have been observed by the BICEP2 experiment. Despite the contribution of gravitational waves, the total power on large scales (CMB power spectrum at low multipoles) is lower than the standard $\\Lambda$CDM cosmology with a power-law spectrum of initial perturbations and no gravitational waves, thus mitigating some of the tension on large scales. There is also a reduction in the matter power spectrum of 20-30\\% at scales corresponding to $k = 10~{\\rm Mpc}^{-1}$, which are relevant for dwarf galaxy formation. This will alleviate some of the unsolved small-scale structure problems in the standard $\\Lambda$CDM cosmology.

Quinn E. Minor; Manoj Kaplinghat

2014-11-03T23:59:59.000Z

320

What Will the Neighbors Think? Building Large-Scale Science Projects Around the World  

ScienceCinema (OSTI)

Public participation is an essential ingredient for turning the International Linear Collider into a reality. Wherever the proposed particle accelerator is sited in the world, its neighbors -- in any country -- will have something to say about hosting a 35-kilometer-long collider in their backyards. When it comes to building large-scale physics projects, almost every laboratory has a story to tell. Three case studies from Japan, Germany and the US will be presented to examine how community relations are handled in different parts of the world. How do particle physics laboratories interact with their local communities? How do neighbors react to building large-scale projects in each region? How can the lessons learned from past experiences help in building the next big project? These and other questions will be discussed to engage the audience in an active dialogue about how a large-scale project like the ILC can be a good neighbor.

Craig Jones, Christian Mrotzek, Nobu Toge and Doug Sarno

2010-01-08T23:59:59.000Z

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Theory of large-scale turbulent transport of chemically active pollutants  

SciTech Connect (OSTI)

This paper shows that ordered Turing structures may be produced in the large-scale turbulent mixing of chemically active pollutants as a result of statistical instability of the spatially homogeneous state. Threshold values are obtained for the variance of a random non-Gaussian velocity field, beyond which this statistical instability is realized even in two-component systems with quadratically nonlinear kinetics. The possibility for the formation of large-scale spatially non-homogeneous concentration distributions of chemically active pollutants by this mechanism is examined.

Chefranov, S.G.

1986-01-01T23:59:59.000Z

322

Observation of femtosecond laser-induced nanostructure-covered large scale waves on metals  

SciTech Connect (OSTI)

Following femtosecond (fs) laser pulse irradiation, we produce a type of periodic surface structure with a period tens of times greater than the laser wavelength and densely covered by an iterating pattern that consists of stripes of nanostructures and microscale cellular structures. The morphology of this large scale wave pattern crucially depends on laser fluence and the number of laser pulses, but not on the laser wavelength. Our study suggests that this large scale wave is initiated by fs laser induced surface unevenness followed by periodically distributed nonuniform surface heating from fs pulse irradiation.

Hwang, Taek Yong; Guo Chunlei [Institute of Optics, University of Rochester, Rochester, New York 14627 (United States)

2011-04-15T23:59:59.000Z

323

Diffuse Pionic Gamma-Ray Emission from Large Scale Structures in the FERMI Era  

E-Print Network [OSTI]

For more than a decade now the complete origin of the diffuse gamma-ray emission background (EGRB) has been unknown. Major components like unresolved star-forming galaxies (making SFCR gamma-ray emission are weak (above the observed EGRB) in some case, in others, some of our models can provide a good fit to the observed EGRB. More importantly, we show that these large-scale shocks could still give an important contribution to the EGRB, especially at high energies. Future detections of cluster gamma-ray emission would help place tighter constraints on our models and give us a better insight into large-scale shocks forming around them.

Aleksandra Dobardzic; Tijana Prodanovic

2014-04-08T23:59:59.000Z

324

CHP Supported with Energy Efficiency Measures -- A Winning and Environmentally Sound Solution in Finland  

E-Print Network [OSTI]

CHP Supported with Energy Efficiency Measures - a Winning and Environmentally Sound Solution in Finland Erkki Hannunkari, IVO Technology Centre In the European Union Energy Progranunes, one of the most significant measures in reducing carbon... dioxides and other emissions is to build additional CHP teclmology. TIris will be implemented with measures to raise the energy efficiency. CHP technology is exceptionally widely used in Finland. At industrial sites, it accounts for more than in any...

Hannunkari, E.

325

Load control in low voltage level of the electricity grid using CHP appliances  

E-Print Network [OSTI]

1 Load control in low voltage level of the electricity grid using µCHP appliances M.G.C. Bosman, V.g.c.bosman@utwente.nl Abstract--The introduction of µCHP (Combined Heat and Power) appliances and other means of distributed on the transformers and, thus, on the grid. In this work we study the influence of introducing µCHP appliances

Al Hanbali, Ahmad

326

IEEE TRANSACTIONS ON POWER SYSTEMS 1 Large-Scale Integration of Deferrable  

E-Print Network [OSTI]

. In order to accurately assess the impacts of renewable energy integration and demand response integration--We present a stochastic unit commitment model for assessing the impacts of the large-scale integration to accu- rately assess the impact of demand response integration on re- Manuscript received May 15, 2012

Oren, Shmuel S.

327

The impact of large scale biomass production on ozone air pollution in Joost B. Beltman a  

E-Print Network [OSTI]

The impact of large scale biomass production on ozone air pollution in Europe Joost B. Beltman a , Carlijn Hendriks a , Markus Tum b , Martijn Schaap a,* a TNO, Department of Climate, Air by up to 25% and 40%. Air pollution mitigation strategies should consider land use management. a r t i

Utrecht, Universiteit

328

Interaction of Turbomachinery Components in Large-scale Unsteady Computations of Jet Engines  

E-Print Network [OSTI]

Interaction of Turbomachinery Components in Large-scale Unsteady Computations of Jet Engines Georgi on the turbomachinery compu- tation and, in particular, on the physics of interaction of different turbomachinery will be discussed for these multi-component turbomachinery simulations. The compressor and turbine of a modern

Alonso, Juan J.

329

Identification of Market Power in Large-Scale Electric Energy Markets Bernard C. Lesieutre  

E-Print Network [OSTI]

Identification of Market Power in Large-Scale Electric Energy Markets Bernard C. Lesieutre Hyung and competitive operation of centrally- dispatched electricity markets. Traditional measures for market power demand and reserve requirements, a centrally-dispatched electricity market provides a transparent

330

Polymeric Electro-optic Modulators: From Chromophore Design to Integration with Semiconductor Very Large Scale Integration  

E-Print Network [OSTI]

Polymeric Electro-optic Modulators: From Chromophore Design to Integration with Semiconductor Very Large Scale Integration Electronics and Silica Fiber Optics L. Dalton, A. Harper, A. Ren, F. Wang, G California, Los Angeles, California 90089-1661 Chromophores with optimized second-order optical nonlinearity

331

Analysis and Management of Heterogeneous User Mobility in Large-scale Downlink Systems  

E-Print Network [OSTI]

Analysis and Management of Heterogeneous User Mobility in Large-scale Downlink Systems Axel M¨uller§, Emil Bj¨ornson§, Romain Couillet, and M´erouane Debbah§ Intel Mobile Communications, Sophia Antipolis, France ACCESS Linnaeus Centre, Signal Processing Lab, KTH Royal Institute of Technology, Sweden

Paris-Sud XI, Université de

332

Development and Deployment of a Large-Scale Flower Recognition Mobile App  

E-Print Network [OSTI]

engine and re- lies on computer vision recognition technology. The mobile phone app is available freeDevelopment and Deployment of a Large-Scale Flower Recognition Mobile App Anelia Angelova NEC Labs- eration of user generated content, especially from mobile de- vices, there is a need to develop

333

A Programming Model for Context-Aware Applications in Large-Scale Pervasive Systems  

E-Print Network [OSTI]

.g. pervasive health-care, city traffic monitoring, environmental monitoring, smart grids). These large- scale, and smart grids. These systems differ significantly from conventional context-aware systems, which focus. Examples of such trends are pervasive health-care, city traffic scheduling, environmental monitoring

Dustdar, Schahram

334

THE PREV AIR SYSTEM, AN OPERATIONAL SYSTEM FOR LARGE SCALE AIR QUALITY FORECASTS OVER EUROPE; APPLICATIONS  

E-Print Network [OSTI]

THE PREV AIR SYSTEM, AN OPERATIONAL SYSTEM FOR LARGE SCALE AIR QUALITY FORECASTS OVER EUROPE Author ABSTRACT Since Summer 2003, the PREV'AIR system has been delivering through the Internet1 daily air quality forecasts over Europe. This is the visible part of a wider collaborative project

Paris-Sud XI, Université de

335

Seven League Boots: A New Metaphor for Augmented Locomotion through Moderately Large Scale Immersive Virtual Environments  

E-Print Network [OSTI]

Seven League Boots: A New Metaphor for Augmented Locomotion through Moderately Large Scale boots. The key characteristic of this method is that it involves determining a user's intended direction virtual hallway, participants overwhelmingly preferred the seven league boots method to the other methods

Interrante, Victoria

336

Realistic Large Scale ad hoc Animal Monitoring Bartosz Wietrzyk, Milena Radenkovic  

E-Print Network [OSTI]

Realistic Large Scale ad hoc Animal Monitoring Bartosz Wietrzyk, Milena Radenkovic School for profitability of animal production as well as welfare of animals and farmers. In this paper we define requirements for such monitoring on the basis of questionnaires distributed to potential users and processing

Aickelin, Uwe

337

Large-scale hierarchical optimization for online advertising and wind farm planning  

E-Print Network [OSTI]

Large-scale hierarchical optimization for online advertising and wind farm planning Konstantin Konstantin Salomatin #12;Keywords: online advertising, sponsored search, wind energy, layout optimization (particularly, spon- sored search) and wind farm turbine-layout planning. Whereas very different in specifics

Eskenazi, Maxine

338

Distinct large-scale turbulent-laminar states in transitional pipe flow  

E-Print Network [OSTI]

Distinct large-scale turbulent-laminar states in transitional pipe flow David Moxey1 and Dwight) When fluid flows through a channel, pipe, or duct, there are two basic forms of motion: smooth laminar numerical computations in pipes of variable lengths up to 125 diameters to investigate the nature of transi

Barkley, Dwight

339

China's changing landscape during the 1990s: Large-scale land transformations estimated with satellite data  

E-Print Network [OSTI]

China's changing landscape during the 1990s: Large-scale land transformations estimated January 2005. [1] Land-cover changes in China are being powered by demand for food for its growing increased by 2.99 million hectares and urban areas increased by 0.82 million hectares. In northern China

340

A Scalable Model for Energy Load Balancing in Large-scale Sensor Networks  

E-Print Network [OSTI]

A Scalable Model for Energy Load Balancing in Large-scale Sensor Networks Seung Jun Baek we consider how one might achieve more balanced energy burdens across the network by spreading sinks change their locations to balance the energy burdens incurred accross the network nodes [1

de Veciana, Gustavo

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

AnKLe: Detecting Attacks in Large Scale Systems via Information Emmanuelle Anceaume  

E-Print Network [OSTI]

AnKLe: Detecting Attacks in Large Scale Systems via Information Divergence Emmanuelle Anceaume. To address this issue, we propose AnKLe (for Attack-tolerant eNhanced Kullback- Leibler divergence Estimator), a novel algorithm for estimating the KL divergence of an observed stream compared to the expected one. AnKLe

Paris-Sud XI, Université de

342

AnKLe: Detecting Attacks in Large Scale Systems via Information Divergence  

E-Print Network [OSTI]

AnKLe: Detecting Attacks in Large Scale Systems via Information Divergence Emmanuelle Anceaume. To address this issue, we propose AnKLe (for Attack-tolerant eNhanced Kullback-Leibler di- vergence Estimator), a novel algorithm for estimating the KL divergence of an observed stream compared to the expected one. AnKLe

Boyer, Edmond

343

Funding for Large-Scale Sustainable Energy Projects Combining Expert Opinions to Support Decisions  

E-Print Network [OSTI]

Funding for Large-Scale Sustainable Energy Projects Combining Expert Opinions to Support Decisions for a sustainable energy future? Three teams, UMass, Harvard, and FEEM (Fondazione Eni Enrico Mattei), share a goal technologies to fund for optimal success for a sustainable energy future. Progress and Results · Created models

Mountziaris, T. J.

344

Studying the energy efficiency of large-scale computer systems requires models of the relationship  

E-Print Network [OSTI]

Abstract Studying the energy efficiency of large-scale computer systems requires models-node clusters using embedded, laptop, desktop, and server processors. These results demonstrate the need usage and power consumption. Therefore, a substantial body of literature models system-level power

Rivoire, Suzanne

345

Chimera: Large-Scale Classification using Machine Learning, Rules, and Crowdsourcing  

E-Print Network [OSTI]

Chimera: Large-Scale Classification using Machine Learning, Rules, and Crowdsourcing Chong Sun1 has been published on how this is done in practice. In this paper we describe Chimera, our solution solutions cease to work. We describe how Chimera employs a combination of learning, rules (created by in

Doan, AnHai

346

Water Consumption Footprint and Land Requirements of Large-Scale Alternative  

E-Print Network [OSTI]

the lifecycle green and blue water consumption footprints of producing: MD from conventional crude oil; Fischer on crude oil and the greenhouse gas intensity of transportation. However, the water and land resourceWater Consumption Footprint and Land Requirements of Large-Scale Alternative Diesel and Jet Fuel

347

Large Scale Distribution of Stochastic Control Algorithms for Gas Storage Constantinos Makassikis, Stephane Vialle  

E-Print Network [OSTI]

Large Scale Distribution of Stochastic Control Algorithms for Gas Storage Valuation Constantinos algorithm which is applied to gas storage valuation, and presents its experimental performances on two PC achieved in the field of gas storage valuation (see [2, 3] for example). As a result, many different price

Vialle, Stéphane

348

Critical Perspectives on Large-Scale Distributed Applications and Production Grids  

E-Print Network [OSTI]

not progressed in phase. Progress in the next phase and generation of distributed applications will require that can seamlessly utilize distributed infrastructures in an extensible and scalable fashion. We believeCritical Perspectives on Large-Scale Distributed Applications and Production Grids Shantenu Jha1

Weissman, Jon

349

Prioritization of fish assemblages with a view to conservation and restoration on a large scale European  

E-Print Network [OSTI]

Prioritization of fish assemblages with a view to conservation and restoration on a large scale The hierarchical organization of important sites for the conservation or the restoration of fish communities, we developed a methodology, which is easy to implement in different locations. Based on the fish

Paris-Sud XI, Université de

350

Mining Induced Seismicity -Monitoring of a Large Scale Salt Cavern Collapse  

E-Print Network [OSTI]

Mining Induced Seismicity - Monitoring of a Large Scale Salt Cavern Collapse E. Klein* (Ineris), I in the Lorraine salt basin (France). To monitor the cavern collapse, a multi-parameter system featuring high of the roof cavern, with no ground surface movement detected. The high microseismic regime of the cavern has

Paris-Sud XI, Université de

351

Challenges and Opportunities in Large-Scale Deployment of Automated Energy Consumption  

E-Print Network [OSTI]

to the locational marginal price (LMP) at that bus. We show that a key challenge in large- scale deployment of ECS, locational marginal price. I. INTRODUCTION Real-time and time-of-use electricity pricing models can- edge among users on how to respond to time-varying prices and the lack of effective home automation

Mohsenian-Rad, Hamed

352

Imprinted large-scale high density polymer nanopillars for organic solar cells  

E-Print Network [OSTI]

Imprinted large-scale high density polymer nanopillars for organic solar cells Mukti Aryal used to make bulk heterojunction solar cells by depositing PCBM on top of the pillars. Imprinting provides a way to precisely control the interdigitized heterojunction morphology, leading to improved solar

Gao, Jinming

353

Discovering Pictorial Brand Associations from Large-Scale Online Image Data Disney Research Pittsburgh  

E-Print Network [OSTI]

Discovering Pictorial Brand Associations from Large-Scale Online Image Data Gunhee Kim Disney concepts associated with brands, and (ii) localizing the re- gions of brand in images. For experiments we collect about five millions of images of 48 brands crawled from five popu- lar online photo sharing sites

Xing, Eric P.

354

Recent advances in large scale image search Herve Jegou, Matthijs Douze, and Cordelia Schmid  

E-Print Network [OSTI]

Recent advances in large scale image search Herve Jegou, Matthijs Douze, and Cordelia Schmid INRIA search. State-of-the-art methods build on the bag-of-features image rep- resentation. We first analyze bag-of-features in the framework of approx- imate nearest neighbor search. This shows the sub

Paris-Sud XI, Université de

355

Microfluidic very large scale integration (mVLSI) with integrated micromechanical valves{  

E-Print Network [OSTI]

Microfluidic very large scale integration (mVLSI) with integrated micromechanical valves{ Ismail40258k Microfluidic chips with a high density of control elements are required to improve device and accessible high-density microfluidic chips, we have fabricated a monolithic PDMS valve architecture

Quake, Stephen R.

356

Asymptotically Optimal Transmission Policies for Large-Scale Low-Power Wireless Sensor Networks  

E-Print Network [OSTI]

Asymptotically Optimal Transmission Policies for Large-Scale Low-Power Wireless Sensor Networks. The objective is to devise joint routing, power control and transmission scheduling policies in order to gather formulate the problem as maximizing the utility of transmissions subject to explicit fairness constraints

Starobinski, David

357

Effects of large-scale distribution of wind energy in and around Europe  

E-Print Network [OSTI]

Effects of large-scale distribution of wind energy in and around Europe Gregor Giebel Niels Gylling energy in Europe? · Distribution of wind energy all over Europe leads to smoothing of the wind power energy can easily supply up to ~20% of the European demand. At this stage, · Less than 13% of the wind

358

@scale: Insights from a Large, Long-Lived Appliance Stephen Dawson-Haggerty  

E-Print Network [OSTI]

Design, Measurement, Performance Keywords Energy, Audit, Building, Power, Wireless, Sensor Network 1@scale: Insights from a Large, Long-Lived Appliance Energy WSN Stephen Dawson-Haggerty , Steven Lanzisera , Jay Taneja , Richard Brown , and David Culler Computer Science Division Environmental Energy

Culler, David E.

359

INORGANIC NANOPARTICLES AS PHASE-CHANGE MATERIALS FOR LARGE-SCALE THERMAL ENERGY STORAGE  

E-Print Network [OSTI]

INORGANIC NANOPARTICLES AS PHASE-CHANGE MATERIALS FOR LARGE- SCALE THERMAL ENERGY STORAGE Miroslaw storage performance. The expected immediate outcome of this effort is the demonstration of high-energy generation at high efficiency could revolutionize the development of solar energy. Nanoparticle-based phase

Pennycook, Steve

360

An Integrated Docking Pipeline for the Prediction of Large-Scale Protein-Protein Interactions  

E-Print Network [OSTI]

An Integrated Docking Pipeline for the Prediction of Large-Scale Protein-Protein Interactions Xin. In this study, we developed a protein-protein docking pipeline (PPDP) that integrates a variety of state studies. In this study, we developed a protein-protein docking pipeline by integrat

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

An analysis and validation pipeline for large-scale RNAi-based screens  

E-Print Network [OSTI]

An analysis and validation pipeline for large-scale RNAi-based screens Michael Plank1 , Guang Hu2 pipeline to prioritize these candidates incorporating effect sizes, functional enrichment analysis associated with oxidative stress resistance, as a proof-of-concept of our pipeline we demonstrate

de Magalhães, João Pedro

362

Energy Evaluation of PMCMTP for Large-Scale Wireless Sensor Networks  

E-Print Network [OSTI]

slots inside each Personal Area Network (PAN)), · Energy balancing and saving to prolong networkEnergy Evaluation of PMCMTP for Large-Scale Wireless Sensor Networks Jamila Ben Slimane, Ye-Qiong Song, Anis Koub^aa§¶ and Mounir Frikha Sup'Com-MEDIATRON, City of Communication Technologies, 2083

Paris-Sud XI, Université de

363

Large Scale Volume Rendering in Immersive Environments with Direct Manipulation Widgets  

E-Print Network [OSTI]

Large Scale Volume Rendering in Immersive Environments with Direct Manipulation Widgets Master's Thesis Proposal Joe Michael Kniss May 15, 2001 1 Introduction 1.1 Thesis Statement Parallel rendering exploration. 1.2 Motivation Direct volume rendering has proven to be an important visualization tool

Kniss, Joe Michael

364

Parallel Implementation of a Large-Scale 3-D Air Pollution Model  

E-Print Network [OSTI]

Parallel Implementation of a Large-Scale 3-D Air Pollution Model Tzvetan Ostromsky1 and Zahari-4000 Roskilde, Denmark, zz@dmu.dk; http://www.dmu.dk/AtmosphericEnvironment Abstract. Air pollution and analyzed. Keywords: air pollution model, system of PDE's, parallel algorithm, shared memory computer

Ostromsky, Tzvetan

365

Optimization and Large Scale Learning Optimization lies at the heart of almost every machine  

E-Print Network [OSTI]

Optimization and Large Scale Learning Optimization lies at the heart of almost every machine these facets requires optimization techniques tailored to not only respect them but to ag- gressively exploit by looking at the recent book [1] (MIT Press, 2011), or at the follow- ing workshops: (i) "Optimization

366

Categorised Ethical Guidelines for Large Scale Mobile HCI Donald McMillan  

E-Print Network [OSTI]

University of Glasgow, UK matthew.chalmers@glasgow.ac.uk ABSTRACT The recent rise in large scale trials of community con- sensus can leave researchers unsure as to how to run a study which meets their ethical in Greenfield's Everyware book [18]. High-level guidelines such as `do no harm' and `default to harmlessness

Chalmers, Matthew

367

Structure and dynamics of glass formers: Predictability at large length scales Ludovic Berthier*  

E-Print Network [OSTI]

Structure and dynamics of glass formers: Predictability at large length scales Ludovic Berthier formers has been related to their static structure using the concept of dynamic propensity. We reexamine dynamical relaxation 2­11 , but their structure, as measured by two-point correlation functions, appears

Berthier, Ludovic

368

Advanced modeling of large-scale oxy-fuel combustion processes  

E-Print Network [OSTI]

Advanced modeling of large-scale oxy-fuel combustion processes Chungen Yin Department of Energy Technology, Aalborg University, DK-9220 Aalborg, Denmark, chy@et.aau.dk Introduction Oxy-fuel combustion simulations of various oxy- fuel combustion processes and experimental validation. Result · A new weighted

Yin, Chungen

369

Fluid computation of the performanceenergy trade-off in large scale Markov models  

E-Print Network [OSTI]

total energy consumption should be chosen. H priority job SLA: 6.5s 90% L priority job SLA: 8s 80Fluid computation of the performance­energy trade-off in large scale Markov models Anton Stefanek to deal with is that of running costs such as energy consumption versus the availability and re- sponse

Imperial College, London

370

Bridging the Gap Between Commissioning Measures and Large Scale Retrofits in Existing Buildings  

E-Print Network [OSTI]

installed in the building to reach the same goal. The purpose of the investigations presented here is to find energy-saving measures which economically fall between the retro-commissioning measures which typically have very short paybacks and the large scale...

Bynum, J.; Jones, A.; Claridge, D. E.

371

FS2You: Peer-Assisted Semi-Persistent Online Storage at a Large Scale  

E-Print Network [OSTI]

Inc. Abstract--It has been widely acknowledged that online storage systems within the "cloud a group. Such online storage services are typically provided by dedicated servers, either in content as an extensive measurement study at a large scale to demonstrate the effectiveness of our design, using real

Wu, Dekai

372

Does the Budget Surplus Justify Large-Scale Tax Cuts?: Updates and Extensions  

E-Print Network [OSTI]

Does the Budget Surplus Justify Large-Scale Tax Cuts?: Updates and Extensions Alan J. Auerbach agreed should not be used for tax cuts. All of the remaining "on-budget" surplus was due to implausible of the on-budget surplus was due to accumulations in government trust funds for medicare and pensions, which

Sadoulet, Elisabeth

373

False Discovery Control in Large-Scale Spatial Multiple Wenguang Sun  

E-Print Network [OSTI]

is one of the six criteria pollutants regulated by the US EPA under the Clean Air Act and has been linkedFalse Discovery Control in Large-Scale Spatial Multiple Testing Wenguang Sun University of Southern and computational framework for false discovery control in multiple testing of spatial signals. We consider both

Cai, T. Tony

374

Page Digest for Large-Scale Web Services Daniel Rocco, David Buttler, Ling Liu  

E-Print Network [OSTI]

Page Digest for Large-Scale Web Services Daniel Rocco, David Buttler, Ling Liu Georgia Institute this storage and processing efficiently. In this paper, we introduce Page Digest, a mechanism for efficient storage and processing of Web documents. The Page Digest design encourages a clean separation

Rocco, Daniel

375

A TWO-STAGE APPROACH TO SOLVING LARGE-SCALE OPTIMAL POWER FLOWS  

E-Print Network [OSTI]

A TWO-STAGE APPROACH TO SOLVING LARGE-SCALE OPTIMAL POWER FLOWS *F e l i x F. Wu George Gross James problem is formulated as an unconstrained minimization problem using penalty functions and i s solved ] and Sasson and Merrill [ 3 ] . The s i z e and t h e extensive amount of computation involved i n solving t h

Gross, George

376

ON THE ROLE OF THE LARGE-SCALE MAGNETIC RECONNECTION IN THE CORONAL HEATING  

E-Print Network [OSTI]

emerging active region. We demonstrate that the effects of remote heating can be seen at significantON THE ROLE OF THE LARGE-SCALE MAGNETIC RECONNECTION IN THE CORONAL HEATING Alexei A. Pevtsov(1 changes in the magnetic connectivity, may play a role in coronal heating. To demonstrate the validity

Pevtsov, Alexei A.

377

Time series modeling and large scale global solar radiation forecasting from geostationary satellites data  

E-Print Network [OSTI]

1 Time series modeling and large scale global solar radiation forecasting from geostationary global solar radiation. In this paper, we use geostationary satellites data to generate 2-D time series of solar radiation for the next hour. The results presented in this paper relate to a particular territory

Paris-Sud XI, Université de

378

Sticky Traps for Large Scale House Fly (Diptera: Muscidae) Trapping in New York Poultry Facilities1  

E-Print Network [OSTI]

Sticky Traps for Large Scale House Fly (Diptera: Muscidae) Trapping in New York Poultry Facilities1 traps were evaluated under field conditions in two commercial high-rise, caged-layer poultry facilities-layerpoultry facilities. One side of each poultry facil- ity received traps with 1.2 m of exposed adhesive,whereas traps

Kaufman, Phillip E.

379

Large-Scale Patent Classification with Min-Max Modular Support Vector Machines  

E-Print Network [OSTI]

Large-Scale Patent Classification with Min-Max Modular Support Vector Machines Xiao-Lei Chu, Chao Ma, Jing Li, Bao-Liang Lu Senior Member, IEEE, Masao Utiyama, and Hitoshi Isahara Abstract-- Patent-world patent classification typically exceeds one million, and this number increases every year. An effective

Lu, Bao-Liang

380

Comparative Analysis of Balanced Winnow and SVM in Large Scale Patent Categorization  

E-Print Network [OSTI]

Comparative Analysis of Balanced Winnow and SVM in Large Scale Patent Categorization Katrien Beuls techniques, a collection of 1.2 million patent applications is used to build a classifier that is able). Contrary to SVM, Balanced Winnow is frequently applied in today's patent categorization systems. Results

Steels, Luc

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

ScriptGard: Automatic Context-Sensitive Sanitization for Large-Scale Legacy Web Applications  

E-Print Network [OSTI]

ScriptGard: Automatic Context-Sensitive Sanitization for Large-Scale Legacy Web Applications@microsoft.com ABSTRACT We empirically analyzed sanitizer use in a shipping web ap- plication with over 400,000 lines of code and over 23,244 methods, the largest empirical analysis of sanitizer use of which we are aware

Livshits, Ben

382

Invited Applications Paper Detecting Large-Scale System Problems by Mining Console Logs  

E-Print Network [OSTI]

. Researchers and operators have been using all kinds of mon- itoring data, from the simplest numerical metrics Problems by Mining Console Logs part operator, and charged with fixing the problem-- are usuallyInvited Applications Paper Detecting Large-Scale System Problems by Mining Console Logs Wei Xu xuw

Xu, Wei

383

Parameter identification in large-scale models for oil and gas production  

E-Print Network [OSTI]

Parameter identification in large-scale models for oil and gas production Jorn F.M. Van Doren: Models used for model-based (long-term) operations as monitoring, control and optimization of oil and gas information to the identification problem. These options are illustrated with examples taken from oil and gas

Van den Hof, Paul

384

STATISTICAL METHODS FOR RELATING TEMPERATURE EXTREMES TO LARGE-SCALE METEOROLOGICAL PATTERNS  

E-Print Network [OSTI]

1 STATISTICAL METHODS FOR RELATING TEMPERATURE EXTREMES TO LARGE-SCALE METEOROLOGICAL PATTERNS Rick Extreme Value Analysis: Block Maxima (3) Conditional Extreme Value Analysis: Peaks over Threshold (4) Application to California Temperature Extremes (5) Remaining Work #12;3 #12;4 #12;5 (1) Introduction

Katz, Richard

385

Large Scale Structures a Gradient Lines: the case of the Trkal Flow  

E-Print Network [OSTI]

A specific asymptotic expansion at large Reynolds numbers (R)for the long wavelength perturbation of a non stationary anisotropic helical solution of the force less Navier-Stokes equations (Trkal solutions) is effectively constructed of the Beltrami type terms through multi scaling analysis. The asymptotic procedure is proved to be valid for one specific value of the scaling parameter,namely for the square root of the Reynolds number (R).As a result large scale structures arise as gradient lines of the energy determined by the initial conditions for two anisotropic Beltrami flows of the same helicity.The same intitial conditions determine the boundaries of the vortex-velocity tubes, containing both streamlines and vortex lines

Libin, Alexander S

2010-01-01T23:59:59.000Z

386

Large Scale Structures a Gradient Lines: the case of the Trkal Flow  

E-Print Network [OSTI]

A specific asymptotic expansion at large Reynolds numbers (R)for the long wavelength perturbation of a non stationary anisotropic helical solution of the force less Navier-Stokes equations (Trkal solutions) is effectively constructed of the Beltrami type terms through multi scaling analysis. The asymptotic procedure is proved to be valid for one specific value of the scaling parameter,namely for the square root of the Reynolds number (R).As a result large scale structures arise as gradient lines of the energy determined by the initial conditions for two anisotropic Beltrami flows of the same helicity.The same intitial conditions determine the boundaries of the vortex-velocity tubes, containing both streamlines and vortex lines

Alexander S. Libin

2010-07-13T23:59:59.000Z

387

Optimization of large-scale heterogeneous system-of-systems models.  

SciTech Connect (OSTI)

Decision makers increasingly rely on large-scale computational models to simulate and analyze complex man-made systems. For example, computational models of national infrastructures are being used to inform government policy, assess economic and national security risks, evaluate infrastructure interdependencies, and plan for the growth and evolution of infrastructure capabilities. A major challenge for decision makers is the analysis of national-scale models that are composed of interacting systems: effective integration of system models is difficult, there are many parameters to analyze in these systems, and fundamental modeling uncertainties complicate analysis. This project is developing optimization methods to effectively represent and analyze large-scale heterogeneous system of systems (HSoS) models, which have emerged as a promising approach for describing such complex man-made systems. These optimization methods enable decision makers to predict future system behavior, manage system risk, assess tradeoffs between system criteria, and identify critical modeling uncertainties.

Parekh, Ojas; Watson, Jean-Paul; Phillips, Cynthia Ann; Siirola, John; Swiler, Laura Painton; Hough, Patricia Diane (Sandia National Laboratories, Livermore, CA); Lee, Herbert K. H. (University of California, Santa Cruz, Santa Cruz, CA); Hart, William Eugene; Gray, Genetha Anne (Sandia National Laboratories, Livermore, CA); Woodruff, David L. (University of California, Davis, Davis, CA)

2012-01-01T23:59:59.000Z

388

A subspace, interior, and conjugate gradient method for large-scale bound-constrained minimization problems  

SciTech Connect (OSTI)

A subspace adaptation of the Coleman-Li trust region and interior method is proposed for solving large-scale bound-constrained minimization problems. This method can be implemented with either sparse Cholesky factorization or conjugate gradient computation. Under reasonable conditions the convergence properties of this subspace trust region method are as strong as those of its full-space version. Computational performance on various large test problems is reported; advantages of the approach are demonstrated. The experience indicates that the proposed method represents an efficient way to solve large bound-constrained minimization problems.

Branch, M.A.; Coleman, T.F.; Li, Y.

1999-09-01T23:59:59.000Z

389

Hydraulic characterization of aquifers by thermal response testing: Validation by large-scale tank and field experiments  

E-Print Network [OSTI]

Hydraulic characterization of aquifers by thermal response testing: Validation by large-scale tank by application to a well-controlled, large-scale tank experiment with 9 m length, 6 m width, and 4.5 m depth, and by data interpretation from a field-scale test. The tank experiment imitates an advection-influenced TRT

Cirpka, Olaf Arie

390

ITP Industrial Distributed Energy: CHP GUIDE #1 - Q & A ON COMBINED...  

Broader source: Energy.gov (indexed) [DOE]

CHP systems can combust propane, fuel oil, hydrogen, landfill or anaerobic digester gas--providing a hedge against rising natural gas costs. * Improved Indoor Air Quality...

391

The Future of the Local Large Scale Structure: the roles of Dark Matter and Dark Energy  

E-Print Network [OSTI]

We study the distinct effects of Dark Matter and Dark Energy on the future evolution of nearby large scale structures using constrained N-body simulations. We contrast a model of Cold Dark Matter and a Cosmological Constant (LCDM) with an Open CDM (OCDM) model with the same matter density Omega_m =0.3 and the same Hubble constant h=0.7. Already by the time the scale factor increased by a factor of 6 (29 Gyr from now in LCDM; 78 Gyr from now in OCDM) the comoving position of the Local Group is frozen. Well before that epoch the two most massive members of the Local Group, the Milky Way and Andromeda, will merge. However, as the expansion rates of the scale factor in the two models are different, the Local Group will be receding in physical coordinates from Virgo exponentially in a LCDM model and at a roughly constant velocity in an OCDM model. More generally, in comoving coordinates the future large scale structure will look like a sharpened image of the present structure: the skeleton of the cosmic web will remain the same, but clusters will be more `isolated' and the filaments will become thinner. This implies that the long-term fate of large scale structure as seen in comoving coordinates is determined primarily by the matter density. We conclude that although the LCDM model is accelerating at present due to its Dark Energy component while the OCDM model is non accelerating, their large scale structure in the future will look very similar in comoving coordinates.

Yehuda Hoffman; Ofer Lahav; Gustavo Yepes; Yaniv Dover

2007-10-10T23:59:59.000Z

392

Inflation that runs naturally: Gravitational waves and suppression of power at large and small scales  

E-Print Network [OSTI]

We point out three correlated predictions of the axion monodromy inflation model: large amplitude of gravitational waves, suppression of power on horizon scales and on scales relevant for the formation of dwarf galaxies. While these predictions are likely generic to models with oscillations in the inflaton potential, the axion monodromy model naturally accommodates the required running spectral index through Planck-scale corrections to the inflaton potential. Applying this model to a combined data set of Planck, ACT, SPT, and WMAP low-$\\ell$ polarization cosmic microwave background (CMB) data, we find a best-fit tensor-to-scalar ratio $r_{0.05} = 0.07^{+0.05}_{-0.04}$ due to gravitational waves, which may have been observed by the BICEP2 experiment. Despite the contribution of gravitational waves, the total power on large scales (CMB power spectrum at low multipoles) is lower than the standard $\\Lambda$CDM cosmology with a power-law spectrum of initial perturbations and no gravitational waves, thus mitigating some of the tension on large scales. There is also a reduction in the matter power spectrum of 20-30\\% at scales corresponding to $k = 10~{\\rm Mpc}^{-1}$, which are relevant for dwarf galaxy formation. This will alleviate some of the unsolved small-scale structure problems in the standard $\\Lambda$CDM cosmology. The inferred matter power spectrum is also found to be consistent with recent Lyman-$\\alpha$ forest data, which is in tension with the Planck-favored $\\Lambda$CDM model with power-law primordial power spectrum.

Quinn E. Minor; Manoj Kaplinghat

2015-03-08T23:59:59.000Z

393

Survey of Climate Conditions for Demonstration of a Large Scale of Solar Energy Heating in Xi'an  

E-Print Network [OSTI]

-scale solar energy heating applications in urban residential buildings. In this paper, Xi'an's geographical situation and climate conditions are fully analyzed. The survey on solar energy resources, and the feasibility of solar energy heating on a large scale...

Li, A.; Liu, Y.

2006-01-01T23:59:59.000Z

394

NSF SCALE-UP GRANT ANNUAL REPORT 1998 The goal of the Student Centered Activities for Large Enrollment University Physics (SCALE-  

E-Print Network [OSTI]

NSF SCALE-UP GRANT ANNUAL REPORT 1998 Summary The goal of the Student Centered Activities for Large Enrollment University Physics (SCALE- UP) is to create and study an introductory calculus-based physics student group. The SCALE-UP curriculum is different from other integrated research-based introductory

Saul, Jeffery M.

395

Approaching the exa-scale: a real-world evaluation of rendering extremely large data sets  

SciTech Connect (OSTI)

Extremely large scale analysis is becoming increasingly important as supercomputers and their simulations move from petascale to exascale. The lack of dedicated hardware acceleration for rendering on today's supercomputing platforms motivates our detailed evaluation of the possibility of interactive rendering on the supercomputer. In order to facilitate our understanding of rendering on the supercomputing platform, we focus on scalability of rendering algorithms and architecture envisioned for exascale datasets. To understand tradeoffs for dealing with extremely large datasets, we compare three different rendering algorithms for large polygonal data: software based ray tracing, software based rasterization and hardware accelerated rasterization. We present a case study of strong and weak scaling of rendering extremely large data on both GPU and CPU based parallel supercomputers using Para View, a parallel visualization tool. Wc use three different data sets: two synthetic and one from a scientific application. At an extreme scale, algorithmic rendering choices make a difference and should be considered while approaching exascale computing, visualization, and analysis. We find software based ray-tracing offers a viable approach for scalable rendering of the projected future massive data sizes.

Patchett, John M [Los Alamos National Laboratory; Ahrens, James P [Los Alamos National Laboratory; Lo, Li - Ta [Los Alamos National Laboratory; Browniee, Carson S [Los Alamos National Laboratory; Mitchell, Christopher J [Los Alamos National Laboratory; Hansen, Chuck [UNIV OF UTAH

2010-10-15T23:59:59.000Z

396

Thermodynamic Modeling and Analysis of the Ratio of Heat to Power Based on a Conceptual CHP System  

E-Print Network [OSTI]

The CHP system not only produces electrical energy, but also produces thermal energy. An extensive analysis of the CHP market reveals that one of the most important engineering characteristics is flexibility. A variable heat-to-power ratio has...

Liu, Z.; Li, X.; Liu, Z.

2006-01-01T23:59:59.000Z

397

8/29/07BCB 444/544 F07 ISU Dobbs #5 -Dynamic Programming 1 Chp 3-Sequence Alignment  

E-Print Network [OSTI]

8/29/07BCB 444/544 F07 ISU Dobbs #5 - Dynamic Programming 1 #12;Chp 3- Sequence Alignment SECTION II SEQUENCE ALIGNMENT Xiong: Chp 3 Pairwise Sequence Alignmentq g · Evolutionary Basis · Sequence

Schürmann, Michael

398

Large-Scale Parallel Finite Element Analysis of the Stress Singular Problems  

SciTech Connect (OSTI)

In this paper, the convergence behavior of large-scale parallel finite element method for the stress singular problems was investigated. The convergence behavior of iterative solvers depends on the efficiency of the pre-conditioners. However, efficiency of pre-conditioners may be influenced by the domain decomposition that is necessary for parallel FEM. In this study the following results were obtained: Conjugate gradient method without preconditioning and the diagonal scaling preconditioned conjugate gradient method were not influenced by the domain decomposition as expected. symmetric successive over relaxation method preconditioned conjugate gradient method converged 6% faster as maximum if the stress singular area was contained in one sub-domain. (authors)

Noriyuki Kushida; Hiroshi Okuda; Genki Yagawa [University of Tokyo (Japan)

2002-07-01T23:59:59.000Z

399

Final Report: Large-Scale Optimization for Bayesian Inference in Complex Systems  

SciTech Connect (OSTI)

The SAGUARO (Scalable Algorithms for Groundwater Uncertainty Analysis and Robust Optimiza- tion) Project focuses on the development of scalable numerical algorithms for large-scale Bayesian inversion in complex systems that capitalize on advances in large-scale simulation-based optimiza- tion and inversion methods. Our research is directed in three complementary areas: efficient approximations of the Hessian operator, reductions in complexity of forward simulations via stochastic spectral approximations and model reduction, and employing large-scale optimization concepts to accelerate sampling. Our efforts are integrated in the context of a challenging testbed problem that considers subsurface reacting flow and transport. The MIT component of the SAGUARO Project addresses the intractability of conventional sampling methods for large-scale statistical inverse problems by devising reduced-order models that are faithful to the full-order model over a wide range of parameter values; sampling then employs the reduced model rather than the full model, resulting in very large computational savings. Results indicate little effect on the computed posterior distribution. On the other hand, in the Texas-Georgia Tech component of the project, we retain the full-order model, but exploit inverse problem structure (adjoint-based gradients and partial Hessian information of the parameter-to- observation map) to implicitly extract lower dimensional information on the posterior distribution; this greatly speeds up sampling methods, so that fewer sampling points are needed. We can think of these two approaches as "reduce then sample" and "sample then reduce." In fact, these two approaches are complementary, and can be used in conjunction with each other. Moreover, they both exploit deterministic inverse problem structure, in the form of adjoint-based gradient and Hessian information of the underlying parameter-to-observation map, to achieve their speedups.

Ghattas, Omar [The University of Texas at Austin] [The University of Texas at Austin

2013-10-15T23:59:59.000Z

400

On scale and magnitude of pressure build-up induced by large-scale geologic storage of CO2  

SciTech Connect (OSTI)

The scale and magnitude of pressure perturbation and brine migration induced by geologic carbon sequestration is discussed assuming a full-scale deployment scenario in which enough CO{sub 2} is captured and stored to make relevant contributions to global climate change mitigation. In this scenario, the volumetric rates and cumulative volumes of CO{sub 2} injection would be comparable to or higher than those related to existing deep-subsurface injection and extraction activities, such as oil production. Large-scale pressure build-up in response to the injection may limit the dynamic storage capacity of suitable formations, because over-pressurization may fracture the caprock, may drive CO{sub 2}/brine leakage through localized pathways, and may cause induced seismicity. On the other hand, laterally extensive sedimentary basins may be less affected by such limitations because (i) local pressure effects are moderated by pressure propagation and brine displacement into regions far away from the CO{sub 2} storage domain; and (ii) diffuse and/or localized brine migration into overlying and underlying formations allows for pressure bleed-off in the vertical direction. A quick analytical estimate of the extent of pressure build-up induced by industrial-scale CO{sub 2} storage projects is presented. Also discussed are pressure perturbation and attenuation effects simulated for two representative sedimentary basins in the USA: the laterally extensive Illinois Basin and the partially compartmentalized southern San Joaquin Basin in California. These studies show that the limiting effect of pressure build-up on dynamic storage capacity is not as significant as suggested by Ehlig-Economides and Economides, who considered closed systems without any attenuation effects.

Zhou, Q.; Birkholzer, J. T.

2011-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

ITP Industrial Distributed Energy: Combined Heat & Power Multifamily Performance Program-- Sea Park East 150 kW CHP System  

Broader source: Energy.gov [DOE]

Overview of Sea Park East 150 kilowatt (kW) Combined Heat and Power (CHP) System in Brooklyn, New York

402

A New Large-Number Coincidence and a Scaling Law for the Cosmological Constant  

E-Print Network [OSTI]

An ensemble of pure numbers of order near 10^122 is produced naturally from the fundamental parameters of modern cosmology. This new large-number coincidence problem is resolved by demonstrating implicit physical connections that follow from the standard cosmological model. However, the occurrence of the new large-number coincidence combined with the known coincidence among pure numbers of order near 10^40 poses a distinct problem that is resolved with a scaling law for the cosmological constant that was originally proposed by Zel'dovich.

Scott Funkhouser

2008-03-16T23:59:59.000Z

403

Large-scale Ocean-based or Geothermal Power Plants by Thermoelectric Effects  

E-Print Network [OSTI]

Heat resources of small temperature difference are easily accessible, free and unlimited on earth. Thermoelectric effects provide the technology for converting these heat resources directly into electricity. We present designs of electricity generators based on thermoelectric effects and using heat resources of small temperature difference, e.g., ocean water at different depths and geothermal sources, and conclude that large-scale power plants based on thermoelectric effects are feasible and economically competitive. The key observation is that the power factor of thermoelectric materials, unlike the figure of merit, can be improved by orders of magnitude upon laminating good conductors and good thermoelectric materials. The predicted large-scale power plants based on thermoelectric effects, if validated, will have a global economic and social impact for its scalability, and the renewability, free and unlimited supply of heat resources of small temperature difference on earth.

Liu, Liping

2012-01-01T23:59:59.000Z

404

Molecular Dynamics Simulations from SNL's Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS)  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

LAMMPS (http://lammps.sandia.gov/index.html) stands for Large-scale Atomic/Molecular Massively Parallel Simulator and is a code that can be used to model atoms or, as the LAMMPS website says, as a parallel particle simulator at the atomic, meso, or continuum scale. This Sandia-based website provides a long list of animations from large simulations. These were created using different visualization packages to read LAMMPS output, and each one provides the name of the PI and a brief description of the work done or visualization package used. See also the static images produced from simulations at http://lammps.sandia.gov/pictures.html The foundation paper for LAMMPS is: S. Plimpton, Fast Parallel Algorithms for Short-Range Molecular Dynamics, J Comp Phys, 117, 1-19 (1995), but the website also lists other papers describing contributions to LAMMPS over the years.

Plimpton, Steve; Thompson, Aidan; Crozier, Paul

405

A PRACTICAL ONTOLOGY FOR THE LARGE-SCALE MODELING OF SCHOLARLY ARTIFACTS AND THEIR USAGE  

SciTech Connect (OSTI)

The large-scale analysis of scholarly artifact usage is constrained primarily by current practices in usage data archiving, privacy issues concerned with the dissemination of usage data, and the lack of a practical ontology for modeling the usage domain. As a remedy to the third constraint, this article presents a scholarly ontology that was engineered to represent those classes for which large-scale bibliographic and usage data exists, supports usage research, and whose instantiation is scalable to the order of 50 million articles along with their associated artifacts (e.g. authors and journals) and an accompanying 1 billion usage events. The real world instantiation of the presented abstract ontology is a semantic network model of the scholarly community which lends the scholarly process to statistical analysis and computational support. They present the ontology, discuss its instantiation, and provide some example inference rules for calculating various scholarly artifact metrics.

RODRIGUEZ, MARKO A. [Los Alamos National Laboratory; BOLLEN, JOHAN [Los Alamos National Laboratory; VAN DE SOMPEL, HERBERT [Los Alamos National Laboratory

2007-01-30T23:59:59.000Z

406

Fractal Holography: a geometric re-interpretation of cosmological large scale structure  

E-Print Network [OSTI]

The fractal dimension of large-scale galaxy clustering has been demonstrated to be roughly $D_F \\sim 2$ from a wide range of redshift surveys. If correct, this statistic is of interest for two main reasons: fractal scaling is an implicit representation of information content, and also the value itself is a geometric signature of area. It is proposed that the fractal distribution of galaxies may thus be interpreted as a signature of holography (``fractal holography''), providing more support for current theories of holographic cosmologies. Implications for entropy bounds are addressed. In particular, because of spatial scale invariance in the matter distribution, it is shown that violations of the spherical entropy bound can be removed. This holographic condition instead becomes a rigid constraint on the nature of the matter density and distribution in the Universe. Inclusion of a dark matter distribution is also discussed, based on theoretical considerations of possible universal CDM density profiles.

J. R. Mureika

2007-05-17T23:59:59.000Z

407

A ranking and exploration service based on large-scale usage data  

SciTech Connect (OSTI)

This poster presents the architecture and user interface of a prototype service that was designed to allow end-users to explore the s tructure of science and perform assessments of scholarly impact on the basis of large-scale usage data. The underlying usage data set was constructed by the NIESUR project which collected 1 billion usage events from a wide range of publishers, aggregators and institutional consortia.

Bollen, Johan [Los Alamos National Laboratory; Van De Sompel, Herbert L [Los Alamos National Laboratory; Balakireva, Lyudmila L [Los Alamos National Laboratory; Chute, Ryan M [Los Alamos National Laboratory

2008-01-01T23:59:59.000Z

408

A Climatology of Tropical Anvil and Its Relationship to the Large-Scale Circulation  

E-Print Network [OSTI]

This research was sponsored by the ARM-DOE Grant DE-FG02-06ER64174. viii TABLE OF CONTENTS Page ABSTRACT??????.???????????????????..??? iii DEDICATION... the climate feedback obtained from doubled CO 2 experiments with different parameterizations of large-scale clouds and moist convection by using the Goddard Institute for Space Studies (GISS) GCM. They showed that the presence of optically thick anvil...

Li, Wei

2011-02-22T23:59:59.000Z

409

Report number ex. Ris-R-1234(EN) 1 Local CHP Plants between the Natural Gas and  

E-Print Network [OSTI]

Report number ex. Risø-R-1234(EN) 1 Local CHP Plants between the Natural Gas and Electricity combined heat and power (CHP) plants in Denmark constitute an important part of the national energy significantly to the electricity production. CHP is, together with the wind power, the almost exclusive

410

Experimental study and modeling of degradation phenomena in HTPEM fuel cell stacks for use in CHP systems  

E-Print Network [OSTI]

Experimental study and modeling of degradation phenomena in HTPEM fuel cell stacks for use in CHP://www.iet.aau.dk ­ * Corresponding author: mpn@iet.aau.dk Abstract: Degradation phenomena in HTPEM fuel cells for use in CHP systems monitored during experiments. Introduction Fuel cell based combined heat and power production (CHP) systems

Berning, Torsten

411

Evidence for separate substrate binding sites for hydrogen peroxide and cumene hydroperoxide (CHP) in the oxidation of ethanol by catalase  

SciTech Connect (OSTI)

The oxidation of ethanol by purified bovine liver catalase (Sigma, C-40) can be supported by H/sub 2/O/sub 2/ or by CHP. The time course of the H/sub 2/O/sub 2/ supported reaction (using glucose/glucose oxidase as the H/sub 2/O/sub 2/ source) was linear for at least one hr, whereas the rate of acetaldehyde formation in the CHP (4.2 mM) supported reaction decreased with time. When catalase was exposed o CHP for 5 min before the addition of ethanol, the rate of CHP supported ethanol oxidation was reduced by more than 90% compared to incubations where the addition of ethanol preceded that of CHP. In the CHP inhibited state, the peroxidative activity of catalase was not restored by further addition of CHP or ethanol; however, addition of fresh catalase yielded its expected activity. Significantly, the CHP inhibited enzyme was equally effective as the untreated enzyme in catalyzing (a) the oxidation of ethanol in the presence H/sub 2/O/sub 2/ supported peroxidative activity as well as catalytic activity by CHP inhibited catalase points to separate binding sites for H/sub 2/O/sub 2/ and CHP in this reaction. Alternatively, CHP may bind adjacent to a common peroxide active site, thereby sterically impeding the binding of CHP - but not of H/sub 2/O/sub 2/ - to this active site.

DeMaster, E.G.; Nagasawa,ss H.T.

1986-03-01T23:59:59.000Z

412

EFFECT OF H2 PRODUCED THROUGH STEAM-METHANE REFORMING ON CHP PLANT EFFICIENCY  

E-Print Network [OSTI]

1 EFFECT OF H2 PRODUCED THROUGH STEAM-METHANE REFORMING ON CHP PLANT EFFICIENCY O. Le Corre1 , C for a CHP plant based on spark ignition engine running under lean conditions. An overall auto combustion engine. The potential benefits of using H2 in spark ignition (SI) engines may be listed as follows

Paris-Sud XI, Université de

413

Filename: FVB Invo2 Forced 121061.CHP Probe Array Type: MG_U74Av2  

E-Print Network [OSTI]

121061.CHP Probe Array Type: MG_U74Av2 Algorithm: Statistical Probe Pair Thr: 8 Controls: Antisense.13 ______________________________________________________________________ ______________________________________________________________________ Filename: FVB Invo2 Forced 121062.CHP Probe Array Type: MG_U74Av2 Algorithm: Statistical Probe Pair Thr: 8

Betz, William J.

414

Institute for Renewable Energy Ltd Preparation of a pilot biogas CHP plant integrated with  

E-Print Network [OSTI]

Institute for Renewable Energy Ltd Poland 1 Preparation of a pilot biogas CHP plant integrated on the preparation phase for a pilot investment in Koczala, Northern Poland, relating to an agricultural biogas CHP production and utilisation of agricultural biogas the project focused on BAT obtainable from various European

415

Studying large-scale structure with the 2dF Galaxy Redshift Survey  

E-Print Network [OSTI]

The 2dF Galaxy Redshift Survey is the first to observe more than 100,000 redshifts. This allows precise measurements of many of the key statistics of galaxy clustering, in particular redshift-space distortions and the large-scale power spectrum. This paper presents the current 2dFGRS results in these areas. Redshift-space distortions are detected with a high degree of significance, confirming the detailed Kaiser distortion from large-scale infall velocities, and measuring the distortion parameter beta equiv Omega_m^{0.6}/b = 0.43 +- 0.07. The power spectrum is measured to 0.02 h Mpc^{-1}, and is well fitted by a CDM model with Omega_m h = 0.20 +- 0.03 and a baryon fraction of 0.15 +- 0.07. A joint analysis with CMB data requires Omega_m = 0.29 +- 0.05, assuming scalar fluctuations, but no priors on other parameters. Two methods are used to determine the large-scale bias parameter: an internal bispectrum analysis yields b = 1.04 +- 0.11, in very good agreement with the b = 1.10 +- 0.08 obtained from a joint 2dFGRS+CMB analysis, again assuming scalar fluctuations. These figures refer to galaxies of approximate luminosity 2L^*; luminosity dependence of clustering is detected at high significance, and is well described by b/b^* = 0.85 + 0.15(L/L^*).

J. A. Peacock; M. Colless; I. Baldry; C. Baugh; J. Bland-Hawthorn; T. J. Bridges; R. Cannon; S. Cole; C. A. Collins; W. Couch; G. B. Dalton; R. De Propris; S. P. Driver; G. Efstathiou; R. S. Ellis; C. S. Frenk; K. Glazebrook; C. A. Jackson; O. Lahav; I. J. Lewis; S. Lumsden; S. J. Maddox; D. Madgwick; P. Norberg; W. Percival; B. A. Peterson; W. J. Sutherland; K. Taylor

2002-05-28T23:59:59.000Z

416

Evidence of Early Enrichment of the Galactic Disk by Large-Scale Winds  

E-Print Network [OSTI]

Large-scale homogeneous surveys of Galactic stars may indicate that the elemental abundance gradient evolves with cosmic time, a phenomenon that was not foreseen in existing models of Galactic chemical evolution (GCE). If the phenomenon is confirmed in future studies, we show that this effect, at least in part, is due to large-scale winds that once enriched the disk. These set up the steep abundance gradient in the inner disk (R <14 kpc). At the close of the wind phase, chemical enrichment through accretion of metal-poor material from the halo onto the disk gradually reduced the metallicity of the inner region, whereas a slow increase in the metallicity proceeded beyond the solar circle. Our "wind+infall" model accounts for flattening of the abundance gradient in the inner disk, in good agreement with observations. Accordingly, we propose that enrichment by large-scale winds is a crucial factor for chemical evolution in the disk. We anticipate that rapid flattening of the abundance gradient is the hallmark...

Tsujimoto, T; Freeman, K C

2010-01-01T23:59:59.000Z

417

A Metascalable Computing Framework for Large Spatiotemporal-Scale Atomistic Simulations  

SciTech Connect (OSTI)

A metascalable (or 'design once, scale on new architectures') parallel computing framework has been developed for large spatiotemporal-scale atomistic simulations of materials based on spatiotemporal data locality principles, which is expected to scale on emerging multipetaflops architectures. The framework consists of: (1) an embedded divide-and-conquer (EDC) algorithmic framework based on spatial locality to design linear-scaling algorithms for high complexity problems; (2) a space-time-ensemble parallel (STEP) approach based on temporal locality to predict long-time dynamics, while introducing multiple parallelization axes; and (3) a tunable hierarchical cellular decomposition (HCD) parallelization framework to map these O(N) algorithms onto a multicore cluster based on hybrid implementation combining message passing and critical section-free multithreading. The EDC-STEP-HCD framework exposes maximal concurrency and data locality, thereby achieving: (1) inter-node parallel efficiency well over 0.95 for 218 billion-atom molecular-dynamics and 1.68 trillion electronic-degrees-of-freedom quantum-mechanical simulations on 212,992 IBM BlueGene/L processors (superscalability); (2) high intra-node, multithreading parallel efficiency (nanoscalability); and (3) nearly perfect time/ensemble parallel efficiency (eon-scalability). The spatiotemporal scale covered by MD simulation on a sustained petaflops computer per day (i.e. petaflops {center_dot} day of computing) is estimated as NT = 2.14 (e.g. N = 2.14 million atoms for T = 1 microseconds).

Nomura, K; Seymour, R; Wang, W; Kalia, R; Nakano, A; Vashishta, P; Shimojo, F; Yang, L H

2009-02-17T23:59:59.000Z

418

Electronic copy available at: http://ssrn.com/abstract=2014754 Joshua M. Pearce, "Industrial Symbiosis for Very Large Scale Photovoltaic  

E-Print Network [OSTI]

Symbiosis for Very Large Scale Photovoltaic Manufacturing", Renewable Energy 33, pp. 11011108, 2008. http://dx.doi.org/10.1016/j.renene.2007.07.002 Industrial Symbiosis of Very Large Scale Photovoltaic Manufacturing. Solar photovoltaic (PV) cells offer a technically sustainable solution to the projected enormous future

Paris-Sud XI, Université de

419

Forest landscape models, a tool for understanding the effect of the large-scale and long-term landscape processes  

E-Print Network [OSTI]

Editorial Forest landscape models, a tool for understanding the effect of the large-scale and long-term landscape processes Forest landscape models have become important tools for understanding large-scale and long-term landscape (spatial) processes such as climate change, fire, windthrow, seed dispersal, insect

He, Hong S.

420

Production cost and air emissions impacts of coal cycling in power systems with large-scale wind penetration  

E-Print Network [OSTI]

Production cost and air emissions impacts of coal cycling in power systems with large-scale wind emissions impacts of coal cycling in power systems with large-scale wind penetration David Luke Oates, and SO2 emissions as well as for the profitability of coal plants, as calculated by our dispatch model

Jaramillo, Paulina

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

CONSTRUCTION AND CALIBRATION OF A LARGE-SCALE MICRO-SIMULATION MODEL OF THE SALT LAKE AREA  

E-Print Network [OSTI]

CONSTRUCTION AND CALIBRATION OF A LARGE-SCALE MICRO-SIMULATION MODEL OF THE SALT LAKE AREA H. Rakha-scale network using a microscopic simulation model. The requirements of a validated microscopic model for large of Intelligent Transportation System (ITS) applications. Typically, microscopic simulation models have been

Rakha, Hesham A.

422

Recent Developments in CHP Policy in the United States  

E-Print Network [OSTI]

28, 2013) 3. Environmental Protection Agency Combined Heat and Power Partnership. 2012. ?Basic Information.? Fact Sheet. http://www.epa.gov/chp/basic/index.html. (March 29, 2013) 4. Oak Ridge National Laboratory. 2008. ?Combined Heat and Power...://www.whitehouse.gov/the- press-office/2012/08/30/executive-order- accelerating-investment-industrial-energy- efficiency. (March 25, 2013) 6. SEE Action. 2013. ?Upcoming Events.? http://www1.eere.energy.gov/seeaction/events.ht ml. (March 28, 2013) 7. Seryak, John. 2012...

Farley, K.; Chittum, A.

2013-01-01T23:59:59.000Z

423

New CHP Technical Assistance Partnerships Launched | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the Contributions andDataNational Library of1,Department of Energy BookPhysicsNew CHP

424

Modular CHP System for Utica College: Design Specification, March 2007 |  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office0-72.pdfGeorgeDoesn't32Department of Energy Modular CHP System for Utica College:

425

Clean Hydrogen Producers Ltd CHP | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORT Americium/CuriumSunways JVGroupChoice Electric CoProducers Ltd CHP

426

Review of CHP Technologies, October 1999 | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l LPROJECTS IN RENEWABLEOperated inFebruary 26, 2009 Special InquiryCHP

427

2008 EPA CHP Partnership Update | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: Top Five EERE Blog Posts of 2014 Year inDepartment ofPresentationsEPA CHP

428

LARGE-SCALE HYDROGEN PRODUCTION FROM NUCLEAR ENERGY USING HIGH TEMPERATURE ELECTROLYSIS  

SciTech Connect (OSTI)

Hydrogen can be produced from water splitting with relatively high efficiency using high-temperature electrolysis. This technology makes use of solid-oxide cells, running in the electrolysis mode to produce hydrogen from steam, while consuming electricity and high-temperature process heat. When coupled to an advanced high temperature nuclear reactor, the overall thermal-to-hydrogen efficiency for high-temperature electrolysis can be as high as 50%, which is about double the overall efficiency of conventional low-temperature electrolysis. Current large-scale hydrogen production is based almost exclusively on steam reforming of methane, a method that consumes a precious fossil fuel while emitting carbon dioxide to the atmosphere. Demand for hydrogen is increasing rapidly for refining of increasingly low-grade petroleum resources, such as the Athabasca oil sands and for ammonia-based fertilizer production. Large quantities of hydrogen are also required for carbon-efficient conversion of biomass to liquid fuels. With supplemental nuclear hydrogen, almost all of the carbon in the biomass can be converted to liquid fuels in a nearly carbon-neutral fashion. Ultimately, hydrogen may be employed as a direct transportation fuel in a “hydrogen economy.” The large quantity of hydrogen that would be required for this concept should be produced without consuming fossil fuels or emitting greenhouse gases. An overview of the high-temperature electrolysis technology will be presented, including basic theory, modeling, and experimental activities. Modeling activities include both computational fluid dynamics and large-scale systems analysis. We have also demonstrated high-temperature electrolysis in our laboratory at the 15 kW scale, achieving a hydrogen production rate in excess of 5500 L/hr.

James E. O'Brien

2010-08-01T23:59:59.000Z

429

Does your facility have CHP potential? Ideal sites will fit the following profile, but sites meeting only a few of these  

E-Print Network [OSTI]

Does your facility have CHP potential? Ideal sites will fit the following profile, but sites meeting only a few of these characteristics may also have a cost-effective CHP opportunity: high upgrades are planned. CHP Potential at Federal Sites Combined heat and power (CHP) systems provide thermal

Oak Ridge National Laboratory

430

LCV-Gas utilization in CHP plants with dual-fuel engines  

SciTech Connect (OSTI)

The utilization of LCV-gases has been increased during the last years, especially in decentralized CHP plants from local power and heat distributors or industry works. Compared with the standard natural gas delivered by the main grid LCV gases are cheaper, wherefore it is possible to decrease energy costs. LCV gases are coming from local natural gas fields or a wide range of technical origins (e. g. steel production, gasification processes, biological processes). Therefore the composition of LCV gases could differ. The basis of this gases are normally methane or combinations of hydrogen and carbon monoxide together with quite large quantities of inert gases. The utilization of LCV gases in internal combustion engines requires high demands on the engine technique and the engine control system. A lot of items must to be considered when designing engines for every special purpose, especially in comparison to utilization of standard natural gas. The combustion system of dual-fuel engines as developed by B+V Industrietechnik GmbH (formerly Blohm + Voss Industrie GmbH) offers a lot of advantages for the utilization of LCV gases. There are two basic possibilities to supply the gases to the engine, one on low pressure level and the other one on high pressure level. The energy content of the pilot fuel injection is much higher than the corresponding value of a spark ignition system. Thus, gases with very low lower heating values and high contents of inert gases can be inflamed stable without problems. This engine type allows a LCV gas utilization with high electrical and thermal efficiencies. As an example for the utilization of a LCV gas the CHP engine plant for Hoogovens Ijmuiden in Holland, one of the largest European steel production companies, is presented.

Mohr, H.

1998-07-01T23:59:59.000Z

431

Large-scale functional models of visual cortex for remote sensing  

SciTech Connect (OSTI)

Neuroscience has revealed many properties of neurons and of the functional organization of visual cortex that are believed to be essential to human vision, but are missing in standard artificial neural networks. Equally important may be the sheer scale of visual cortex requiring {approx}1 petaflop of computation. In a year, the retina delivers {approx}1 petapixel to the brain, leading to massively large opportunities for learning at many levels of the cortical system. We describe work at Los Alamos National Laboratory (LANL) to develop large-scale functional models of visual cortex on LANL's Roadrunner petaflop supercomputer. An initial run of a simple region VI code achieved 1.144 petaflops during trials at the IBM facility in Poughkeepsie, NY (June 2008). Here, we present criteria for assessing when a set of learned local representations is 'complete' along with general criteria for assessing computer vision models based on their projected scaling behavior. Finally, we extend one class of biologically-inspired learning models to problems of remote sensing imagery.

Brumby, Steven P [Los Alamos National Laboratory; Kenyon, Garrett [Los Alamos National Laboratory; Rasmussen, Craig E [Los Alamos National Laboratory; Swaminarayan, Sriram [Los Alamos National Laboratory; Bettencourt, Luis [Los Alamos National Laboratory; Landecker, Will [PORTLAND STATE UNIV.

2009-01-01T23:59:59.000Z

432

Nonlinear Seismic Correlation Analysis of the JNES/NUPEC Large-Scale Piping System Tests.  

SciTech Connect (OSTI)

The Japan Nuclear Energy Safety Organization/Nuclear Power Engineering Corporation (JNES/NUPEC) large-scale piping test program has provided valuable new test data on high level seismic elasto-plastic behavior and failure modes for typical nuclear power plant piping systems. The component and piping system tests demonstrated the strain ratcheting behavior that is expected to occur when a pressurized pipe is subjected to cyclic seismic loading. Under a collaboration agreement between the US and Japan on seismic issues, the US Nuclear Regulatory Commission (NRC)/Brookhaven National Laboratory (BNL) performed a correlation analysis of the large-scale piping system tests using derailed state-of-the-art nonlinear finite element models. Techniques are introduced to develop material models that can closely match the test data. The shaking table motions are examined. The analytical results are assessed in terms of the overall system responses and the strain ratcheting behavior at an elbow. The paper concludes with the insights about the accuracy of the analytical methods for use in performance assessments of highly nonlinear piping systems under large seismic motions.

Nie,J.; DeGrassi, G.; Hofmayer, C.; Ali, S.

2008-06-01T23:59:59.000Z

433

Large-Scale Structure in the ROSAT North Ecliptic Pole Survey  

E-Print Network [OSTI]

We have used the ROSAT All-Sky Survey around the North Ecliptic Pole to construct a complete sample of galaxy clusters. The deep and contiguous nature of the survey affords us the opportunity to examine large-scale structure in the Universe on scales of hundreds of megaparsecs. We have identified over 99% of the 446 X-ray sources in the survey area. The cluster sample consists of 65 objects with redshifts approaching unity. Surprisingly, some 20% of the clusters exists in a wall-like structure at z=0.088 spanning the entire 9 deg x 9 deg survey region. This is a very significant extension of both the membership and the spatial extent to a known supercluster in this location.

Christopher R. Mullis

1999-12-14T23:59:59.000Z

434

Viscoplasticity and large-scale chain relaxation in glassy-polymeric strain hardening  

E-Print Network [OSTI]

A simple theory for glassy polymeric mechanical response which accounts for large scale chain relaxation is presented. It captures the crossover from perfect-plastic response to strong strain hardening as the degree of polymerization $N$ increases, without invoking entanglements. By relating hardening to interactions on the scale of monomers and chain segments, we correctly predict its magnitude. Strain activated relaxation arising from the need to maintain constant chain contour length reduces the $N$ dependence of the characteristic relaxation time by a factor $\\sim \\dot\\epsilon N$ during active deformation at strain rate $\\dot\\epsilon$. This prediction is consistent with results from recent experiments and simulations, and we suggest how it may be further tested experimentally.

Robert S. Hoy; Corey S. O'Hern

2010-08-06T23:59:59.000Z

435

Large-scale dynamic compaction demonstration using WIPP salt: Fielding and preliminary results  

SciTech Connect (OSTI)

Reconsolidation of crushed rock salt is a phenomenon of great interest to programs studying isolation of hazardous materials in natural salt geologic settings. Of particular interest is the potential for disaggregated salt to be restored to nearly an impermeable state. For example, reconsolidated crushed salt is proposed as a major shaft seal component for the Waste Isolation Pilot Plant (WIPP) Project. The concept for a permanent shaft seal component of the WIPP repository is to densely compact crushed salt in the four shafts; an effective seal will then be developed as the surrounding salt creeps into the shafts, further consolidating the crushed salt. Fundamental information on placement density and permeability is required to ensure attainment of the design function. The work reported here is the first large-scale compaction demonstration to provide information on initial salt properties applicable to design, construction, and performance expectations. The shaft seals must function for 10,000 years. Over this period a crushed salt mass will become less permeable as it is compressed by creep closure of salt surrounding the shaft. These facts preclude the possibility of conducting a full-scale, real-time field test. Because permanent seals taking advantage of salt reconsolidation have never been constructed, performance measurements have not been made on an appropriately large scale. An understanding of potential construction methods, achievable initial density and permeability, and performance of reconsolidated salt over time is required for seal design and performance assessment. This report discusses fielding and operations of a nearly full-scale dynamic compaction of mine-run WIPP salt, and presents preliminary density and in situ (in place) gas permeability results.

Ahrens, E.H.; Hansen, F.D. [Sandia National Labs., Albuquerque, NM (United States). Nuclear Waste Technology Repository Isolation Systems

1995-10-01T23:59:59.000Z

436

Introduction Large scale structure of the Earth Small scale structure Dynamics and evolution Conclusions and outlook Structure, dynamics and evolution of the core-mantle  

E-Print Network [OSTI]

Introduction Large scale structure of the Earth Small scale structure Dynamics and evolution Conclusions and outlook Structure, dynamics and evolution of the core-mantle boundary region Stéphane Labrosse École normale supérieure de Lyon Institut universitaire de France 14 mai 2012 1 / 63 Structure, dynamics

437

Materials Science and Materials Chemistry for Large Scale Electrochemical Energy Storage: From Transportation to Electrical Grid  

SciTech Connect (OSTI)

Large-scale electrical energy storage has become more important than ever for reducing fossil energy consumption in transportation and for the widespread deployment of intermittent renewable energy in electric grid. However, significant challenges exist for its applications. Here, the status and challenges are reviewed from the perspective of materials science and materials chemistry in electrochemical energy storage technologies, such as Li-ion batteries, sodium (sulfur and metal halide) batteries, Pb-acid battery, redox flow batteries, and supercapacitors. Perspectives and approaches are introduced for emerging battery designs and new chemistry combinations to reduce the cost of energy storage devices.

Liu, Jun; Zhang, Jiguang; Yang, Zhenguo; Lemmon, John P.; Imhoff, Carl H.; Graff, Gordon L.; Li, Liyu; Hu, Jian Z.; Wang, Chong M.; Xiao, Jie; Xia, Guanguang; Viswanathan, Vilayanur V.; Baskaran, Suresh; Sprenkle, Vincent L.; Li, Xiaolin; Shao, Yuyan; Schwenzer, Birgit

2013-02-15T23:59:59.000Z

438

Large-Scale Structure Formation in the Quasi-linear Regime  

E-Print Network [OSTI]

The understanding of the large-scale structure formation requires the resolution of coupled nonlinear equations describing the cosmic density and velocity fields. This is a complicated problem that, for the last decade, has been essentially addressed with N-body simulations. There is however a regime, the so-called quasi-linear regime, for which the relative density fluctuations are on average below unity. It is then possible to apply Perturbation Theory techniques where the perturbation expansions are made with respect to the initial fluctuations. I review here the major results that have been obtained in this regime.

F. Bernardeau

1996-07-02T23:59:59.000Z

439

A model for red blood cells in simulations of large-scale blood flows  

E-Print Network [OSTI]

Red blood cells (RBCs) are an essential component of blood. A method to include the particulate nature of blood is introduced here with the goal of studying circulation in large-scale realistic vessels. The method uses a combination of the Lattice Boltzmann method (LBM) to account for the plasma motion, and a modified Molecular Dynamics scheme for the cellular motion. Numerical results illustrate the quality of the model in reproducing known rheological properties of blood as much as revealing the effect of RBC structuring on the wall shear stress, with consequences on the development of cardiovascular diseases.

Simone Melchionna

2011-07-25T23:59:59.000Z

440

Femtosecond laser-induced asymmetric large scale waves on gold surfaces  

SciTech Connect (OSTI)

With femtosecond (fs) pulse irradiation, we investigate the morphological evolution of a unique type of fs laser-induced periodic surface structure, called nanostructure-covered large scale waves (NC-LSWs), covered by iterating stripe patterns of nanostructures and microstructures with a period of tens of microns. By monitoring the morphological profile of NC-LSWs following fs laser heating of Au, we show that the NC-LSWs are highly asymmetrically formed and propagate on a gold surface. We believe that the selective laser ablation of Au surface and the subsequent mass transfer of liquid Au following nonuniform energy deposition result in the asymmetric NC-LSW propagation on metals.

Yong Hwang, Taek; Guo, Chunlei [Institute of Optics, University of Rochester, Rochester, New York 14627 (United States)

2012-07-09T23:59:59.000Z

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

The Feasibility of Building Large Scale Optical Switches Using a Novel MZI-SOA Hybrid Approach  

E-Print Network [OSTI]

presents a schematic of the loop control plane. The switch is mounted on a thermo-electric cooler and operates at 20ºC. Lensed fibres are used to couple light in and out the chip, with a coupling loss of 8dB. A central scheduler (Stanford Research Systems... The Feasibility of Building Large Scale Optical Switches Using a Novel MZI-SOA Hybrid Approach Q. Cheng, J. L. Wei, A. Wonfor, R.V. Penty and I.H. White Centre for Photonic Systems, Electrical Division, Department of Engineering, University...

Cheng, Q.; Wei, J. L.; Wonfor, A.; Penty, R. V.; White, I. H.

2014-01-01T23:59:59.000Z

442

THE APM CLUSTER SURVEY: CLUSTER DETECTION AND LARGE-SCALE STRUCTURE  

E-Print Network [OSTI]

The APM Cluster Survey was based on a modification of Abell's original classification scheme for galaxy clusters. Here we discuss the results of an investigation of the stability of the statistical properties of the cluster catalogue to changes in the selection parameters. For a poor choice of selection parameters we find clear indications of line-of-sight clusters, but there is a wide range of input parameters for which the statistical properties of the catalogue are stable. We conclude that clusters selected in this way are indeed useful as tracers of large-scale structure.

G. B. Dalton

1995-05-17T23:59:59.000Z

443

Large-Scale Field Study of Landfill Covers at Sandia National Laboratories  

SciTech Connect (OSTI)

A large-scale field demonstration comparing final landfill cover designs has been constructed and is currently being monitored at Sandia National Laboratories in Albuquerque, New Mexico. Two conventional designs (a RCRA Subtitle `D' Soil Cover and a RCRA Subtitle `C' Compacted Clay Cover) were constructed side-by-side with four alternative cover test plots designed for dry environments. The demonstration is intended to evaluate the various cover designs based on their respective water balance performance, ease and reliability of construction, and cost. This paper presents an overview of the ongoing demonstration.

Dwyer, S.F.

1998-09-01T23:59:59.000Z

444

Large-Scale Production of Marine Microalgae for Fuel and Feeds  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe10 DOEWashington,LM-04-XXXX OfficeLandLarge-Scale Manufacturing

445

Large Scale Modular Quantum Computer Architecture with Atomic Memory and Photonic Interconnects  

E-Print Network [OSTI]

The practical construction of scalable quantum computer hardware capable of executing non-trivial quantum algorithms will require the juxtaposition of different types of quantum systems. We analyze a modular ion trap quantum computer architecture with a hierarchy of interactions that can scale to very large numbers of qubits. Local entangling quantum gates between qubit memories within a single register are accomplished using natural interactions between the qubits, and entanglement between separate registers is completed via a probabilistic photonic interface between qubits in different registers, even over large distances. We show that this architecture can be made fault-tolerant, and demonstrate its viability for fault-tolerant execution of modest size quantum circuits.

C. Monroe; R. Raussendorf; A. Ruthven; K. R. Brown; P. Maunz; L. -M. Duan; J. Kim

2013-07-02T23:59:59.000Z

446

Large scale dynamics of the Persistent Turning Walker model of fish behavior  

E-Print Network [OSTI]

This paper considers a new model of individual displacement, based on fish motion, the so-called Persistent Turning Walker (PTW) model, which involves an Ornstein-Uhlenbeck process on the curvature of the particle trajectory. The goal is to show that its large time and space scale dynamics is of diffusive type, and to provide an analytic expression of the diffusion coefficient. Two methods are investigated. In the first one, we compute the large time asymptotics of the variance of the individual stochastic trajectories. The second method is based on a diffusion approximation of the kinetic formulation of these stochastic trajectories. The kinetic model is a Fokker-Planck type equation posed in an extended phase-space involving the curvature among the kinetic variables. We show that both methods lead to the same value of the diffusion constant. We present some numerical simulations to illustrate the theoretical results.

Pierre Degond; Sébastien Motsch

2007-10-26T23:59:59.000Z

447

Reducing cosmological small scale structure via a large dark matter-neutrino interaction: constraints and consequences  

E-Print Network [OSTI]

Cold dark matter explains a wide range of data on cosmological scales. However, there has been a steady accumulation of evidence for discrepancies between simulations and observations at scales smaller than galaxy clusters. Solutions to these small scale structure problems may indicate that simulations need to improve how they include feedback from baryonic matter, or may imply that dark matter properties differ from the standard cold, noninteracting scenario. One promising way to affect structure formation on small scales is a relatively strong coupling of dark matter to neutrinos. We construct an experimentally viable, simple, renormalizable, model with new interactions between neutrinos and dark matter. We show that addressing the small scale structure problems requires dark matter with a mass that is tens of MeV, and a present-day density determined by an initial particle-antiparticle asymmetry in the dark sector. Generating a sufficiently large dark matter-neutrino coupling requires a new heavy neutrino with a mass around 100 MeV. The heavy neutrino is mostly sterile but has a substantial $\\tau$ neutrino component, while the three nearly massless neutrinos are partly sterile. We provide the first discussion of how such dark matter-neutrino interactions affect neutrino (especially $\\tau$ neutrino) phenomenology. This model can be tested by future astrophysical, particle physics, and neutrino oscillation data. A feature in the neutrino energy spectrum and flavor content from a future nearby supernova would provide strong evidence of neutrino-dark matter interactions. Promising signatures include anomalous matter effects in neutrino oscillations due to nonstandard interactions and a component of the $\\tau$ neutrino with mass around 100 MeV.

Bridget Bertoni; Seyda Ipek; David McKeen; Ann E. Nelson

2014-12-09T23:59:59.000Z

448

Connecting the Physical Properties of Galaxies with the Overdensity and Tidal Shear of the Large-Scale Environment  

E-Print Network [OSTI]

We have examined the correlations between the large-scale environment of galaxies and their physical properties, using a sample of 28,354 nearby galaxies drawn from the Sloan Digital Sky Survey, and the large-scale tidal field reconstructed in real space from the 2Mass Redshift Survey and smoothed over a radius of $\\sim 6 h^{-1}$Mpc. The large-scale environment is expressed in terms of the overdensity, the ellipticity of the shear and the type of the large-scale structure. The physical properties analyzed include $r$-band absolute magnitude $M_{^{0.1}r}$, stellar mass $M_\\ast$, $g-r$ colour, concentration parameter $R_{90}/R_{50}$ and surface stellar mass density $\\mu_\\ast$. Both luminosity and stellar mass are found to be statistically linked to the large-scale environment, regardless of how the environment is quantified. More luminous (massive) galaxies reside preferentially in the regions with higher densities, lower ellipticities and halo-like structures. At fixed luminosity, the large-scale overdensity depends strongly on parameters related to the recent star formation history, that is colour and D(4000), but is almost independent of the structural parameters $R_{90}/R_{50}$ and $\\mu_\\ast$. All the physical properties are statistically linked to the shear of the large-scale environment even when the large-scale density is constrained to a narrow range. This statistical link has been found to be most significant in the quasi-linear regions where the large-scale density approximates to an order of unity, but no longer significant in highly nonlinear regimes with $\\delta_{\\rm LS}\\gg 1$.

Jounghun Lee; Cheng Li

2008-03-12T23:59:59.000Z

449

Large Scale Ice Water Path and 3-D Ice Water Content  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Cloud ice water concentration is one of the most important, yet poorly observed, cloud properties. Developing physical parameterizations used in general circulation models through single-column modeling is one of the key foci of the ARM program. In addition to the vertical profiles of temperature, water vapor and condensed water at the model grids, large-scale horizontal advective tendencies of these variables are also required as forcing terms in the single-column models. Observed horizontal advection of condensed water has not been available because the radar/lidar/radiometer observations at the ARM site are single-point measurement, therefore, do not provide horizontal distribution of condensed water. The intention of this product is to provide large-scale distribution of cloud ice water by merging available surface and satellite measurements. The satellite cloud ice water algorithm uses ARM ground-based measurements as baseline, produces datasets for 3-D cloud ice water distributions in a 10 deg x 10 deg area near ARM site. The approach of the study is to expand a (surface) point measurement to an (satellite) areal measurement. That is, this study takes the advantage of the high quality cloud measurements at the point of ARM site. We use the cloud characteristics derived from the point measurement to guide/constrain satellite retrieval, then use the satellite algorithm to derive the cloud ice water distributions within an area, i.e., 10 deg x 10 deg centered at ARM site.

Liu, Guosheng

450

Testing of Large-Scale ICV Glasses with Hanford LAW Simulant  

SciTech Connect (OSTI)

Preliminary glass compositions for immobilizing Hanford low-activity waste (LAW) by the in-container vitrification (ICV) process were initially fabricated at crucible- and engineering-scale, including simulants and actual (radioactive) LAW. Glasses were characterized for vapor hydration test (VHT) and product consistency test (PCT) responses and crystallinity (both quenched and slow-cooled samples). Selected glasses were tested for toxicity characteristic leach procedure (TCLP) responses, viscosity, and electrical conductivity. This testing showed that glasses with LAW loading of 20 mass% can be made readily and meet all product constraints by a far margin. Glasses with over 22 mass% Na2O can be made to meet all other product quality and process constraints. Large-scale testing was performed at the AMEC, Geomelt Division facility in Richland. Three tests were conducted using simulated LAW with increasing loadings of 12, 17, and 20 mass% Na2O. Glass samples were taken from the test products in a manner to represent the full expected range of product performance. These samples were characterized for composition, density, crystalline and non-crystalline phase assemblage, and durability using the VHT, PCT, and TCLP tests. The results, presented in this report, show that the AMEC ICV product with meets all waste form requirements with a large margin. These results provide strong evidence that the Hanford LAW can be successfully vitrified by the ICV technology and can meet all the constraints related to product quality. The economic feasibility of the ICV technology can be further enhanced by subsequent optimization.

Hrma, Pavel R.; Kim, Dong-Sang; Vienna, John D.; Matyas, Josef; Smith, Donald E.; Schweiger, Michael J.; Yeager, John D.

2005-03-01T23:59:59.000Z

451

Parallel supercomputing: Advanced methods, algorithms, and software for large-scale linear and nonlinear problems  

SciTech Connect (OSTI)

The program outlined here is directed to research on methods, algorithms, and software for distributed parallel supercomputers. Of particular interest are finite element methods and finite difference methods together with sparse iterative solution schemes for scientific and engineering computations of very large-scale systems. Both linear and nonlinear problems will be investigated. In the nonlinear case, applications with bifurcation to multiple solutions will be considered using continuation strategies. The parallelizable numerical methods of particular interest are a family of partitioning schemes embracing domain decomposition, element-by-element strategies, and multi-level techniques. The methods will be further developed incorporating parallel iterative solution algorithms with associated preconditioners in parallel computer software. The schemes will be implemented on distributed memory parallel architectures such as the CRAY MPP, Intel Paragon, the NCUBE3, and the Connection Machine. We will also consider other new architectures such as the Kendall-Square (KSQ) and proposed machines such as the TERA. The applications will focus on large-scale three-dimensional nonlinear flow and reservoir problems with strong convective transport contributions. These are legitimate grand challenge class computational fluid dynamics (CFD) problems of significant practical interest to DOE. The methods developed and algorithms will, however, be of wider interest.

Carey, G.F.; Young, D.M.

1993-12-31T23:59:59.000Z

452

Primordial Magnetic Field Effects on the CMB and Large Scale Structure  

E-Print Network [OSTI]

Magnetic fields are everywhere in nature and they play an important role in every astronomical environment which involves the formation of plasma and currents. It is natural therefore to suppose that magnetic fields could be present in the turbulent high temperature environment of the big bang. Such a primordial magnetic field (PMF) would be expected to manifest itself in the cosmic microwave background (CMB) temperature and polarization anisotropies, and also in the formation of large- scale structure. In this review we summarize the theoretical framework which we have developed to calculate the PMF power spectrum to high precision. Using this formulation, we summarize calculations of the effects of a PMF which take accurate quantitative account of the time evolution of the cut off scale. We review the constructed numerical program, which is without approximation, and an improvement over the approach used in a number of previous works for studying the effect of the PMF on the cosmological perturbations. We demonstrate how the PMF is an important cosmological physical process on small scales. We also summarize the current constraints on the PMF amplitude $B_\\lambda$ and the power spectral index $n_B$ which have been deduced from the available CMB observational data by using our computational framework.

Dai G. Yamazaki; Kiyotomo Ichiki; Toshitaka Kajino; Grant J. Mathew

2011-12-21T23:59:59.000Z

453

Combined Climate and Carbon-Cycle Effects of Large-Scale Deforestation  

SciTech Connect (OSTI)

The prevention of deforestation and promotion of afforestation have often been cited as strategies to slow global warming. Deforestation releases CO{sub 2} to the atmosphere, which exerts a warming influence on Earth's climate. However, biophysical effects of deforestation, which include changes in land surface albedo, evapotranspiration, and cloud cover also affect climate. Here we present results from several large-scale deforestation experiments performed with a three-dimensional coupled global carbon-cycle and climate model. These are the first such simulations performed using a fully three-dimensional model representing physical and biogeochemical interactions among land, atmosphere, and ocean. We find that global-scale deforestation has a net cooling influence on Earth's climate, since the warming carbon-cycle effects of deforestation are overwhelmed by the net cooling associated with changes in albedo and evapotranspiration. Latitude-specific deforestation experiments indicate that afforestation projects in the tropics would be clearly beneficial in mitigating global-scale warming, but would be counterproductive if implemented at high latitudes and would offer only marginal benefits in temperate regions. While these results question the efficacy of mid- and high-latitude afforestation projects for climate mitigation, forests remain environmentally valuable resources for many reasons unrelated to climate.

Bala, G; Caldeira, K; Wickett, M; Phillips, T J; Lobell, D B; Delire, C; Mirin, A

2006-10-17T23:59:59.000Z

454

A state, characteristics, and perspectives of the Czech combined heating and power (CHP) systems  

SciTech Connect (OSTI)

The combined production of electricity and heat is a significant method for saving primary energy sources like fossil fuels, as well as reducing the production of CO{sub 2} and its emission to the atmosphere. The paper discusses the total efficiency of combined heat and power generation (CHP), comparing various types of CHP plants. The paper then describes the situation in the Czech Republic with regard to their centralized heat supply. The author concludes that there is no simple way to rebuild the Czech CHP systems, and that it would be better to start construction on more modern plants. He lists several starting principles to follow in the planning and design stage.

Kadrnozka, J. [Technical Univ. of Brno (Czech Republic)

1994-12-31T23:59:59.000Z

455

Calculation of large scale relative permeabilities from stochastic properties of the permeability field and fluid properties  

SciTech Connect (OSTI)

The paper describes the method and presents preliminary results for the calculation of homogenized relative permeabilities using stochastic properties of the permeability field. In heterogeneous media, the spreading of an injected fluid is mainly sue to the permeability heterogeneity and viscosity fingering. At large scale, when the heterogeneous medium is replaced by a homogeneous one, we need to introduce a homogenized (or pseudo) relative permeability to obtain the same spreading. Generally, is derived by using fine-grid numerical simulations (Kyte and Berry). However, this operation is time consuming and cannot be performed for all the meshes of the reservoir. We propose an alternate method which uses the information given by the stochastic properties of the field without any numerical simulation. The method is based on recent developments on homogenized transport equations (the {open_quotes}MHD{close_quotes} equation, Lenormand SPE 30797). The MHD equation accounts for the three basic mechanisms of spreading of the injected fluid: (1) Dispersive spreading due to small scale randomness, characterized by a macrodispersion coefficient D. (2) Convective spreading due to large scale heterogeneities (layers) characterized by a heterogeneity factor H. (3) Viscous fingering characterized by an apparent viscosity ration M. In the paper, we first derive the parameters D and H as functions of variance and correlation length of the permeability field. The results are shown to be in good agreement with fine-grid simulations. The are then derived a function of D, H and M. The main result is that this approach lead to a time dependent . Finally, the calculated are compared to the values derived by history matching using fine-grid numerical simulations.

Lenormand, R.; Thiele, M.R. [Institut Francais du Petrole, Rueil Malmaison (France)

1997-08-01T23:59:59.000Z

456

FY results for the Los Alamos large scale demonstration and deployment project  

SciTech Connect (OSTI)

The Los Alamos Large Scale Demonstration and Deployment Project (LSDDP) in support of the US Department of Energy (DOE) Deactivation and Decommissioning Focus Area (DDFA) is identifying and demonstrating technologies to reduce the cost and risk of management of transuranic element contaminated large metal objects, i.e. gloveboxes. DOE must dispose of hundreds of gloveboxes from Rocky Flats, Los Alamos and other DOE sites. Current practices for removal, decontamination and size reduction of large metal objects translates to a DOE system-wide cost in excess of $800 million, without disposal costs. In FY99 and FY00 the Los Alamos LSDDP performed several demonstrations on cost/risk savings technologies. Commercial air pallets were demonstrated for movement and positioning of the oversized crates in neutron counting equipment. The air pallets are able to cost effectively address the complete waste management inventory, whereas the baseline wheeled carts could address only 25% of the inventory with higher manpower costs. A gamma interrogation radiography technology was demonstrated to support characterization of the crates. The technology was developed for radiography of trucks for identification of contraband. The radiographs were extremely useful in guiding the selection and method for opening very large crated metal objects. The cost of the radiography was small and the operating benefit is high. Another demonstration compared a Blade Cutting Plunger and reciprocating saw for removal of glovebox legs and appurtenances. The cost comparison showed that the Blade Cutting Plunger costs were comparable, and a significant safety advantage was reported. A second radiography demonstration was conducted evaluation of a technology based on WIPP-type x-ray characterization of large boxes. This technology provides considerable detail of the contents of the crates. The technology identified details as small as the fasteners in the crates, an unpunctured aerosol can, and a vessel containing liquids. The cost of this technology is higher than the gamma interrogation technique, but the detail provided is much greater.

Stallings, E.; McFee, J. [and others

2000-11-01T23:59:59.000Z

457

Properties of liquid clusters in large-scale molecular dynamics nucleation simulations  

SciTech Connect (OSTI)

We have performed large-scale Lennard-Jones molecular dynamics simulations of homogeneous vapor-to-liquid nucleation, with 10{sup 9} atoms. This large number allows us to resolve extremely low nucleation rates, and also provides excellent statistics for cluster properties over a wide range of cluster sizes. The nucleation rates, cluster growth rates, and size distributions are presented in Diemand et al. [J. Chem. Phys. 139, 74309 (2013)], while this paper analyses the properties of the clusters. We explore the cluster temperatures, density profiles, potential energies, and shapes. A thorough understanding of the properties of the clusters is crucial to the formulation of nucleation models. Significant latent heat is retained by stable clusters, by as much as ?kT = 0.1? for clusters with size i = 100. We find that the clusters deviate remarkably from spherical—with ellipsoidal axis ratios for critical cluster sizes typically within b/c = 0.7 ± 0.05 and a/c = 0.5 ± 0.05. We examine cluster spin angular momentum, and find that it plays a negligible role in the cluster dynamics. The interfaces of large, stable clusters are thinner than planar equilibrium interfaces by 10%?30%. At the critical cluster size, the cluster central densities are between 5% and 30% lower than the bulk liquid expectations. These lower densities imply larger-than-expected surface areas, which increase the energy cost to form a surface, which lowers nucleation rates.

Angélil, Raymond; Diemand, Jürg [Institute for Theoretical Physics, University of Zurich, 8057 Zurich (Switzerland)] [Institute for Theoretical Physics, University of Zurich, 8057 Zurich (Switzerland); Tanaka, Kyoko K.; Tanaka, Hidekazu [Institute of Low Temperature Science, Hokkaido University, Sapporo 060-0819 (Japan)] [Institute of Low Temperature Science, Hokkaido University, Sapporo 060-0819 (Japan)

2014-02-21T23:59:59.000Z

458

Lessons from a Large-Scale Assessment: Results from Conceptual Inventories  

E-Print Network [OSTI]

We report the conceptual inventory results of a large-scale assessment project at a large university. We studied an attempt at introducing materials and instructional methods informed by physics education research (PER-informed materials) into a department where most instruction has been traditional and a significant number of faculty are hesitant, ambivalent or even resistant about the introduction of such reforms. The changes were made in the laboratories and recitation sections of the introductory classes, both calculus-based and algebra-based, introducing PER-informed materials and training the teaching assistants in student-centered instructional methods. In addition to the results found in the large lecture classes, we present the results of a small PER-informed, inquiry-based, laboratory-based class that has been taught as a special section of the algebra-based course for about 10 years. The assessment reported in this paper was done using available PER-developed assessment instruments. The results of ...

Thacker, Beth; Pattillo, Dave; West, Keith

2013-01-01T23:59:59.000Z

459

NGC 2207/IC 2163: A GRAZING ENCOUNTER WITH LARGE-SCALE SHOCKS  

SciTech Connect (OSTI)

Radio continuum, Spitzer infrared, optical, and XMM-Newton X-ray and ultraviolet observations (UVW1 and UVM2) are used to study large-scale shock fronts, young star complexes, and the galactic nuclei in the interacting galaxies NGC 2207/IC 2163. There are two types of large-scale shock fronts in this galaxy pair. The large-scale shock front along the rim of the ocular oval in IC 2163 has produced vigorous star formation in a dusty environment, bright in the Spitzer 8 {mu}m and 24 {mu}m images. In the outer part of the companion side of NGC 2207, a large-scale front attributed to halo scraping is particularly bright in the {lambda}6 cm and {lambda}20 cm radio continuum but not in any tracers of recent star formation (H{alpha}, 8 {mu}m, 24 {mu}m, or ultraviolet emission) or in X-rays. This radio-continuum front may be from compression of the halo magnetic field on the back side of NGC 2207, between the two galaxies. The X-ray emission sets an upper limit to the gas density in the halo. Values of the flux density ratio S{sub {nu}}(8 {mu}m)/S{sub {nu}}(6 cm) of prominent, kiloparsec-size, Spitzer/IRAC star-forming clumps in NGC 2207/IC 2163 are compared with those of giant radio H II regions in M81. For the bright clumps in NGC 2207, the mean value of this ratio is the same as for the M81 H II regions, whereas for the bright clumps on the rim of the IC 2163 ocular oval, the mean value is nearly a factor of two greater. Possible explanations for this are discussed. The galaxy pair has global values of the ratios of infrared-to-radio continuum flux density in the Spitzer 8 {mu}m, 24 {mu}m, and 70 {mu}m bands, and the IRAS FIR significantly below the medians/means for large samples of galaxies. Feature i, a mini-starburst on an outer arm of NGC 2207 on its anti-companion side, is the most luminous 8 {mu}m, 24 {mu}m, 70 {mu}m, radio continuum, and H{alpha} source in the galaxy pair. We find evidence that a radio supernova was present in the core of feature i in 2001. X-ray emission is detected from the nucleus of NGC 2207 and from nine discrete sources whose X-ray luminosities make them possible candidates for Ultraluminous X-ray sources. One of these corresponds with the Type Ib SN 1999ec, which is also bright in the ultraviolet, and another may be a radio supernova or a background quasar. The X-ray luminosity of the NGC 2207 nucleus is log L{sub 0.3-10.0keV} = 40.6 erg s{sup -1}, which, together with its X-ray spectrum, suggests that this is a highly absorbed, low-luminosity, active galactic nucleus.

Kaufman, Michele [Department of Physics, Ohio State University, 191 West Woodruff Ave, Columbus, OH 43210 (United States); Grupe, Dirk [Department of Astronomy and Astrophysics, Pennsylvania State University, 525 Davey Lab, University Park, PA 16802 (United States); Elmegreen, Bruce G. [IBM Research Division, T. J. Watson Research Center, P.O. Box 218, Yorktown Heights, NY 10598 (United States); Elmegreen, Debra M. [Department of Physics and Astronomy, Vassar College, 124 Raymond Ave., Poughkeepsie, NY 12604 (United States); Struck, Curtis [Department of Physics and Astronomy, Iowa State University, Ames, IA 50011 (United States); Brinks, Elias, E-mail: rallis.1@osu.edu, E-mail: dxg35@psu.edu, E-mail: bge@us.ibm.com, E-mail: elmegreen@vassar.edu, E-mail: curt@iastate.edu, E-mail: E.Brinks@herts.ac.uk [Centre for Astrophysics Research, University of Hertfordshire, College Lane, Hatfield AL10 9AB (United Kingdom)

2012-11-01T23:59:59.000Z

460

Analysis of long-term flows resulting from large-scale sodium-water reactions in an LMFBR secondary system  

SciTech Connect (OSTI)

Leaks in LMFBR steam generators cannot entirely be prevented; thus the steam generators and the intermediate heat transport system (IHTS) of an LMFBR must be designed to withstand the effects of the leaks. A large-scale leak which might result from a sudden break of a steam generator tube, and the resulting sodium-water reaction (SWR) can generate large pressure pulses that propagate through the IHTS and exert large forces on the piping supports. This paper discusses computer programs for analyzing long-term flow and thermal effects in an LMFBR secondary system resulting from large-scale steam generator leaks, and the status of the development of the codes.

Shin, Y.W.; Chung, H.; Choi, U.S.; Wiedermann, A.H.; Ockert, C.E.

1984-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Carbon emissions reduction potential in the US chemicals and pulp and paper industries by applying CHP technologies  

SciTech Connect (OSTI)

The chemical and the pulp/paper industries combined provide 55% of CHP generation in the US industry. Yet, significant potential for new CHP capacities exists in both industries. From the present steam consumption data, the authors estimate about 50 GW of additional technical potential for CHP in both industries. The reduced carbon emissions will be equivalent to 44% of the present carbon emissions in these industries. They find that most of the carbon emissions reductions can be achieved at negative costs. Depending on the assumptions used in calculations, the economic potential of CHP in these industries can be significantly lower, and carbon emissions mitigation costs can be much higher. Using sensitivity analyses, they determine that the largest effect on the CHP estimate have the assumptions in the costs of CHP technology, in the assumed discount rates, in improvements in efficiency of CHP technologies, and in the CHP equipment depreciation periods. Changes in fuel and electricity prices and the growth in the industries' steam demand have less of an effect. They conclude that the lowest carbon mitigation costs are achieved with the CHP facility is operated by the utility and when industrial company that owns the CHP unit can sell extra electricity and steam to the open wholesale market. Based on the results of the analyses they discuss policy implications.

Khrushch, M.; Worrell, E.; Price, L.; Martin, N.; Einstein, D.

1999-07-01T23:59:59.000Z

462

Application and Mode Establishment of Asset-backed Securitization in Existing Large-scale Public Building Retrofit Financing in China  

E-Print Network [OSTI]

Statistical data for 2005 show that electrical consumption of large-scale public buildings occupying 5 percent of total residential construction area equals 50 percent of the total residential electrical consumption in Beijing. It is necessary...

Sun, J.; Wu, Y.; Dai, Z.; Hao, Y.

2006-01-01T23:59:59.000Z

463

Agile project dynamics : a strategic project management approach to the study of large-scale software development using system dynamics  

E-Print Network [OSTI]

Large-scale software engineering organizations have traditionally used plan-driven, heavyweight, waterfall-style approaches for the planning, execution, and monitoring of software development efforts. This approach often ...

Glaiel, Firas (Firas S.)

2012-01-01T23:59:59.000Z

464

Solar Power in the Desert: Are the current large-scale solar developments really improving California’s environment?  

E-Print Network [OSTI]

D EVELOPMENT I SSUES Solar Power in the Desert: Are the2 Most of the large-scale solar power projects utilize largethat will be affected by solar power facilities. There are

Allen, Michael F.; McHughen, Alan

2011-01-01T23:59:59.000Z

465

current encounters a large island (main islands of Palau) basin-scale currents are driven by winds  

E-Print Network [OSTI]

Summary · current encounters a large island (main islands of Palau) · basin-scale currents are driven by winds · strong boundary currents like Gulf Stream · Palau has a boundary current · current

Johnston, Shaun

466

Unified Architecture for Large-Scale Attested Metering Michael LeMay, George Gross, Carl A. Gunter, Sanjam Garg  

E-Print Network [OSTI]

Unified Architecture for Large-Scale Attested Metering Michael LeMay, George Gross, Carl A. Gunter, Sanjam Garg University of Illinois Urbana-Champaign {mdlemay2,gross,cgunter,sanjamg}@uiuc.edu Abstract We

Gross, George

467

The Association of Large-Scale Climate Variability and Teleconnections on Wind Energy Resource over Europe and its Intermittency  

E-Print Network [OSTI]

In times of increasing importance of wind power in the world’s energy mix, this study focuses on a better understanding of the influences of large-scale climate variability on wind power resource over Europe. The impact ...

Kriesche, Pascal

468

Large-scale eddies and their role in entrainment in turbulent jets and wakes Jimmy Philip and Ivan Marusic  

E-Print Network [OSTI]

Large-scale eddies and their role in entrainment in turbulent jets and wakes Jimmy Philip and Ivan jets and wakes Jimmy Philipa) and Ivan Marusicb) Department of Mechanical Engineering, University

Marusic, Ivan

469

Impact of Potential Large-Scale Irrigation on the West African Monsoon and Its Dependence on Location of Irrigated Area  

E-Print Network [OSTI]

This study investigates the impact of potential large-scale irrigation on the West African monsoon using the Massachusetts Institute of Technology regional climate model (MRCM). A new irrigation module is implemented to ...

Im, Eun-Soon

470

The Role of the state in large-scale hydropower development perspectives from Chile, Ecuador, and Perú  

E-Print Network [OSTI]

In recent years, governments in South America have turned to large-scale hydropower as a cost-effective way to improve livelihoods while addressing the energy 'trilemma': ensuring that future energy technologies provide ...

Zambrano-Barragán, Patricio Xavier

2012-01-01T23:59:59.000Z

471

Protein Engineering vol.8 no. 11 pp.1177-1187, 1995 Large-scale expression, purification and characterization of small  

E-Print Network [OSTI]

Protein Engineering vol.8 no. 11 pp.1177-1187, 1995 Large-scale expression, purification and characterization of small fragments of thrombomodulin: the roles of the sixth domain and of methionine 388

Komives, Elizabeth A.

472

Model As-of Right Zoning Ordinance or Bylaw: Allowing Use of Large-Scale Solar Energy Facilities  

Broader source: Energy.gov [DOE]

Note: This model ordinance was designed to provide guidance to local governments seeking to develop siting rules for large-scale, ground-mounted solar (250 kW and above). While it was developed as...

473

Re-evaluation of the 1995 Hanford Large Scale Drum Fire Test Results  

SciTech Connect (OSTI)

A large-scale drum performance test was conducted at the Hanford Site in June 1995, in which over one hundred (100) 55-gal drums in each of two storage configurations were subjected to severe fuel pool fires. The two storage configurations in the test were pallet storage and rack storage. The description and results of the large-scale drum test at the Hanford Site were reported in WHC-SD-WM-TRP-246, ''Solid Waste Drum Array Fire Performance,'' Rev. 0, 1995. This was one of the main references used to develop the analytical methodology to predict drum failures in WHC-SD-SQA-ANAL-501, 'Fire Protection Guide for Waste Drum Storage Array,'' September 1996. Three drum failure modes were observed from the test reported in WHC-SD-WM-TRP-246. They consisted of seal failure, lid warping, and catastrophic lid ejection. There was no discernible failure criterion that distinguished one failure mode from another. Hence, all three failure modes were treated equally for the purpose of determining the number of failed drums. General observations from the results of the test are as follows: {lg_bullet} Trash expulsion was negligible. {lg_bullet} Flame impingement was identified as the main cause for failure. {lg_bullet} The range of drum temperatures at failure was 600 C to 800 C. This is above the yield strength temperature for steel, approximately 540 C (1,000 F). {lg_bullet} The critical heat flux required for failure is above 45 kW/m{sup 2}. {lg_bullet} Fire propagation from one drum to the next was not observed. The statistical evaluation of the test results using, for example, the student's t-distribution, will demonstrate that the failure criteria for TRU waste drums currently employed at nuclear facilities are very conservative relative to the large-scale test results. Hence, the safety analysis utilizing the general criteria described in the five bullets above will lead to a technically robust and defensible product that bounds the potential consequences from postulated fires in TRU waste facilities, the means of storage in which are the Type A, 55-gal drums.

Yang, J M

2007-05-02T23:59:59.000Z

474

IEEE TRANSACTIONS ON POWER SYSTEMS, VOL. 29, NO. 1, JANUARY 2014 489 Large-Scale Integration of Deferrable  

E-Print Network [OSTI]

-scale integration of these resources. In order to accurately assess the impacts of renewable energy integration of the large-scale integration of renewable energy sources and deferrable demand in power systems in terms assess the impact of demand response integration on re- serve requirements and operating costs in cases

Oren, Shmuel S.

475

A Power Provision and Capping Architecture for Large Scale Systems Yongpeng Liu, Hong Zhu, Kai Lu and Yongyan Liu  

E-Print Network [OSTI]

.e. the K com- puter, reaches 12.659 MW, which equals the power usage of a middle scale city. In 2006, US. Dollars. This is about 1.5% of the total U.S. electricity consumption or the output of about 15 typical architecture of power provision and capping to control the power consumption of large scale clusters

Zhu, Hong

476

A Management Tool for Analyzing CHP Natural Gas Liquids Recovery System  

E-Print Network [OSTI]

The objective of this research is to develop a management tool for analyzing combined heat and power (CHP) natural gas liquids (NGL) recovery systems. The methodology is developed around the central ideas of product recovery, possible recovery...

Olsen, C.; Kozman, T. A.; Lee, J.

2008-01-01T23:59:59.000Z

477

Bayesian reconstruction of the cosmological large-scale structure: methodology, inverse algorithms and numerical optimization  

E-Print Network [OSTI]

We address the inverse problem of cosmic large-scale structure reconstruction from a Bayesian perspective. For a linear data model, a number of known and novel reconstruction schemes, which differ in terms of the underlying signal prior, data likelihood, and numerical inverse extra-regularization schemes are derived and classified. The Bayesian methodology presented in this paper tries to unify and extend the following methods: Wiener-filtering, Tikhonov regularization, Ridge regression, Maximum Entropy, and inverse regularization techniques. The inverse techniques considered here are the asymptotic regularization, the Jacobi, Steepest Descent, Newton-Raphson, Landweber-Fridman, and both linear and non-linear Krylov methods based on Fletcher-Reeves, Polak-Ribiere, and Hestenes-Stiefel Conjugate Gradients. The structures of the up-to-date highest-performing algorithms are presented, based on an operator scheme, which permits one to exploit the power of fast Fourier transforms. Using such an implementation of t...

Kitaura, F S

2007-01-01T23:59:59.000Z

478

Optimized multi-site local orbitals in the large-scale DFT program CONQUEST  

E-Print Network [OSTI]

We introduce numerical optimization of multi-site support functions in the linear-scaling DFT code CONQUEST. Multi-site support functions, which are linear combinations of pseudo-atomic orbitals on a target atom and those neighbours within a cutoff, have been recently proposed to reduce the number of support functions to the minimal basis while keeping the accuracy of a large basis [J. Chem. Theory Comput., 2014, 10, 4813]. The coefficients were determined by using the local filter diagonalization (LFD) method [Phys. Rev. B, 2009, 80, 205104]. We analyse the effect of numerical optimization of the coefficients produced by the LFD method. Tests on crystalline silicon, a benzene molecule and hydrated DNA systems show that the optimization improves the accuracy of the multi-site support functions with small cutoffs. It is also confirmed that the optimization guarantees the variational energy minimizations with multi-site support functions.

Nakata, Ayako; Miyazaki, Tsuyoshi

2015-01-01T23:59:59.000Z

479

Distortive Effects of Initial-Based Name Disambiguation on Measurements of Large-Scale Coauthorship Networks  

E-Print Network [OSTI]

Scholars have often relied on name initials to resolve name ambiguities in large-scale coauthorship network research. This approach bears the risk of incorrectly merging or splitting author identities. The use of initial-based disambiguation has been justified by the assumption that such errors would not affect research findings too much. This paper tests this assumption by analyzing coauthorship networks from five academic fields - biology, computer science, nanoscience, neuroscience, and physics - and an interdisciplinary journal, PNAS. Name instances in datasets of this study were disambiguated based on heuristics gained from previous algorithmic disambiguation solutions. We use disambiguated data as a proxy of ground-truth to test the performance of three types of initial-based disambiguation. Our results show that initial-based disambiguation can misrepresent statistical properties of coauthorship networks: it deflates the number of unique authors, number of component, average shortest paths, clustering ...

Kim, Jinseok

2015-01-01T23:59:59.000Z

480

Using MPI File Caching to Improve Parallel Write Performance for Large-Scale Scientific Applications  

SciTech Connect (OSTI)

Typical large-scale scientific applications periodically write checkpoint files to save the computational state throughout execution. Existing parallel file systems improve such write-only I/O patterns through the use of clientside file caching and write-behind strategies. In distributed environments where files are rarely accessed by more than one client concurrently, file caching has achieved significant success; however, in parallel applications where multiple clients manipulate a shared file, cache coherence control can serialize I/O. We have designed a thread based caching layer for the MPI I/O library, which adds a portable caching system closer to user applications so more information about the application's I/O patterns is available for better coherence control. We demonstrate the impact of our caching solution on parallel write performance with a comprehensive evaluation that includes a set of widely used I/O benchmarks and production application I/O kernels.

Liao, Wei-keng [Northwestern University, Evanston; Ching, Avery [Northwestern University, Evanston; Coloma, Kenin [Northwestern University, Evanston; Nisar, Arifa [Northwestern University, Evanston; Choudhary, Alok [Northwestern University, Evanston; Chen, Jackie [Sandia National Laboratories (SNL); Sankaran, Ramanan [ORNL; Klasky, Scott A [ORNL

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "large scale chp" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Using MPI file caching to improve parallel write performance for large-scale scientific applications  

SciTech Connect (OSTI)

Typical large-scale scientific applications periodically write checkpoint files to save the computational state throughout execution. Existing parallel file systems improve such write-only I/O patterns through the use of client-side file caching and write-behind strategies. In distributed environments where files are rarely accessed by more than one client concurrently, file caching has achieved significant success; however, in parallel applications where multiple clients manipulate a shared file, cache coherence control can serialize I/O. We have designed a thread based caching layer for the MPI I/O library, which adds a portable caching system closer to user applications so more information about the application's I/O patterns is available for better coherence control. We demonstrate the impact of our caching solution on parallel write performance with a comprehensive evaluation that includes a set of widely used I/O benchmarks and production application I/O kernels.

Sankaran, Ramanan [ORNL; Liao, Wei-Keng [ORNL; Chen, Jacqueline H [Sandia National Laboratories (SNL); Klasky, Scott A [ORNL; Choudhary, Alok [Northwestern University, Evanston

2007-01-01T23:59:59.000Z

482

Overview of large scale experiments performed within the LBB project in the Czech Republic  

SciTech Connect (OSTI)

During several recent years NRI Rez has been performing the LBB analyses of safety significant primary circuit pipings of NPPs in Czech and Slovak Republics. The analyses covered the NPPs with reactors WWER 440 Type 230 and 213 and WWER 1000 Type 320. Within the relevant LBB projects undertaken with the aim to prove the fulfilling of the requirements of LBB, a series of large scale experiments were performed. The goal of these experiments was to verify the properties of the components selected, and to prove the quality and/or conservatism of assessments used in the LBB-analyses. In this poster, a brief overview of experiments performed in Czech Republic under guidance of NRI Rez is presented.

Kadecka, P.; Lauerova, D. [Nuclear Research Institute, Rez (Czechoslovakia)

1997-04-01T23:59:59.000Z

483

Large scale test simulations using the Virtual Environment for Test Optimization (VETO)  

SciTech Connect (OSTI)

The Virtual Environment for Test Optimization (VETO) is a set of simulation tools under development at Sandia to enable test engineers to do computer simulations of tests. The tool set utilizes analysis codes and test information to optimize design parameters and to provide an accurate model of the test environment which aides in the maximization of test performance, training, and safety. Previous VETO effort has included the development of two structural dynamics simulation modules that provide design and optimization tools for modal and vibration testing. These modules have allowed test engineers to model and simulate complex laboratory testing, to evaluate dynamic response behavior, and to investigate system testability. Further development of the VETO tool set will address the accurate modeling of large scale field test environments at Sandia. These field test environments provide weapon system certification capabilities and have different simulation requirements than those of laboratory testing.

Klenke, S.E.; Heffelfinger, S.R.; Bell, H.J.; Shierling, C.L.

1997-10-01T23:59:59.000Z

484

Large scale flows in the solar interior: Effect of asymmetry in peak profiles  

E-Print Network [OSTI]

Ring diagram analysis can be used to study large scale velocity fields in the outer part of the solar convection zone. All previous works assume that the peak profiles in the solar oscillation power spectrum are symmetric. However, it has now been demonstrated that the peaks are not symmetric. In this work we study how the explicit use of asymmetric peak profiles in ring-diagram analysis influences the estimated velocity fields. We find that the use of asymmetric profiles leads to significant improvement in the fits, but the estimated velocity fields are not substantially different from those obtained using a symmetric profile to fit the peaks. The resulting velocity fields are compared with those obtained by other investigators.

Sarbani Basu; H. M. Antia

1999-06-15T23:59:59.000Z

485

Infrared spectroscopy of large scale single layer graphene on self assembled organic monolayer  

SciTech Connect (OSTI)

We study the effect of self-assembled monolayer (SAM) organic molecule substrate on large scale single layer graphene using infrared transmission measurement on Graphene/SAM/SiO{sub 2}/Si composite samples. From the Drude weight of the chemically inert CH{sub 3}-SAM, the electron-donating NH{sub 2}-SAM, and the SAM-less graphene, we determine the carrier density doped into graphene by the three sources—the SiO{sub 2} substrate, the gas-adsorption, and the functional group of the SAM's—separately. The SAM-treatment leads to the low carrier density N???4?×?10{sup 11}?cm{sup ?2} by blocking the dominant SiO{sub 2}- driven doping. The carrier scattering increases by the SAM-treatment rather than decreases. However, the transport mobility is nevertheless improved due to the reduced carrier doping.

Woo Kim, Nak; Youn Kim, Joo; Lee, Chul; Choi, E. J., E-mail: echoi@uos.ac.kr [Department of Physics, University of Seoul, Seoul 130-743 (Korea, Republic of); Jin Kim, Sang; Hee Hong, Byung [Department of Chemistry, Seoul National University, Seoul 151-742 (Korea, Republic of)

2014-01-27T23:59:59.000Z

486

Large Scale Structure in the Local Universe: The 2MASS Galaxy Catalog  

E-Print Network [OSTI]

Using twin ground-based telescopes, the Two Micron All Sky Survey (2MASS) scanned both equatorial hemi- spheres, detecting more than 500 million stars and resolving more than 1.5 million galaxies in the near-infrared (1 - 2.2 microns) bands. The Extended Source "Galaxy" Catalog (XSC) embodies both photometric and astrometric whole sky uniformity, revealing large scale structures in the local Universe and extending our view into the Milky Way's dust-obscured "Zone of Avoidance." The XSC represents a uniquely unbiased sample of "normal" galaxies, particularly sensitive to the underlying, dominant, stellar mass component of galaxies. The basic properties of the XSC, including photometric sensitivity, source counts, and spatial distribution are presented here. We illustrate the spatial clustering properties, ranging from interacting galaxies to groups and clusters, and finally to the largest "cosmic web" of superclusters spanning the sky.

Thomas Jarrett

2004-05-04T23:59:59.000Z

487

Detection of the effect of cosmological large-scale structure on the orientation of galaxies  

E-Print Network [OSTI]

Galaxies are not distributed randomly throughout space but are instead arranged in an intricate "cosmic web" of filaments and walls surrounding bubble-like voids. There is still no compelling observational evidence of a link between the structure of the cosmic web and how galaxies form within it. However, such a connection is expected on the basis of our understanding of the origin of galaxy angular momentum: disk galaxies should be highly inclined relative to the plane defined by the large-scale structure surrounding them. Using the two largest galaxy redshift surveys currently in existence (2dFGRS and SDSS) we show at the 99.7% confident level that these alignments do indeed exist: spiral galaxies located on the shells of the largest cosmic voids have rotation axes that lie preferentially on the void surface.

Ignacio Trujillo; Conrado Carretero; Santiago G. Patiri

2006-02-20T23:59:59.000Z

488

PATHWAYS OF LARGE-SCALE MAGNETIC COUPLINGS BETWEEN SOLAR CORONAL EVENTS  

SciTech Connect (OSTI)

The high-cadence, comprehensive view of the solar corona by SDO/AIA shows many events that are widely separated in space while occurring close together in time. In some cases, sets of coronal events are evidently causally related, while in many other instances indirect evidence can be found. We present case studies to highlight a variety of coupling processes involved in coronal events. We find that physical linkages between events do occur, but concur with earlier studies that these couplings appear to be crucial to understanding the initiation of major eruptive or explosive phenomena relatively infrequently. We note that the post-eruption reconfiguration timescale of the large-scale corona, estimated from the extreme-ultraviolet afterglow, is on average longer than the mean time between coronal mass ejections (CMEs), so that many CMEs originate from a corona that is still adjusting from a previous event. We argue that the coronal field is intrinsically global: current systems build up over days to months, the relaxation after eruptions continues over many hours, and evolving connections easily span much of a hemisphere. This needs to be reflected in our modeling of the connections from the solar surface into the heliosphere to properly model the solar wind, its perturbations, and the generation and propagation of solar energetic particles. However, the large-scale field cannot be constructed reliably by currently available observational resources. We assess the potential of high-quality observations from beyond Earth's perspective and advanced global modeling to understand the couplings between coronal events in the context of CMEs and solar energetic particle events.

Schrijver, Carolus J.; Title, Alan M.; DeRosa, Marc L. [Lockheed Martin Advanced Technology Center, 3251 Hanover Street, Palo Alto, CA 94304 (United States); Yeates, Anthony R. [Department of Mathematical Sciences, Durham University, Science Laboratories, South Road, Durham DH1 3LE (United Kingdom)

2013-08-20T23:59:59.000Z

489

NESC-VII: Fracture Mechanics Analyses of WPS Experiments on Large-scale Cruciform Specimen  

SciTech Connect (OSTI)

This paper describes numerical analyses performed to simulate warm pre-stress (WPS) experiments conducted with large-scale cruciform specimens within the Network for Evaluation of Structural Components (NESC-VII) project. NESC-VII is a European cooperative action in support of WPS application in reactor pressure vessel (RPV) integrity assessment. The project aims in evaluation of the influence of WPS when assessing the structural integrity of RPVs. Advanced fracture mechanics models will be developed and performed to validate experiments concerning the effect of different WPS scenarios on RPV components. The Oak Ridge National Laboratory (ORNL), USA contributes to the Work Package-2 (Analyses of WPS experiments) within the NESCVII network. A series of WPS type experiments on large-scale cruciform specimens have been conducted at CEA Saclay, France, within the framework of NESC VII project. This paper first describes NESC-VII feasibility test analyses conducted at ORNL. Very good agreement was achieved between AREVA NP SAS and ORNL. Further analyses were conducted to evaluate the NESC-VII WPS tests conducted under Load-Cool-Transient- Fracture (LCTF) and Load-Cool-Fracture (LCF) conditions. This objective of this work is to provide a definitive quantification of WPS effects when assessing the structural integrity of reactor pressure vessels. This information will be utilized to further validate, refine, and improve the WPS models that are being used in probabilistic fracture mechanics computer codes now in use by the NRC staff in their effort to develop risk-informed updates to Title 10 of the U.S. Code of Federal Regulations (CFR), Part 50, Appendix G.

Yin, Shengjun [ORNL; Williams, Paul T [ORNL; Bass, Bennett Richard [ORNL

2011-01-01T23:59:59.000Z

490

Survey and analysis of selected jointly owned large-scale electric utility storage projects  

SciTech Connect (OSTI)

The objective of this study was to examine and document the issues surrounding the curtailment in commercialization of large-scale electric storage projects. It was sensed that if these issues could be uncovered, then efforts might be directed toward clearing away these barriers and allowing these technologies to penetrate the market to their maximum potential. Joint-ownership of these projects was seen as a possible solution to overcoming the major barriers, particularly economic barriers, of commercializaton. Therefore, discussions with partners involved in four pumped storage projects took place to identify the difficulties and advantages of joint-ownership agreements. The four plants surveyed included Yards Creek (Public Service Electric and Gas and Jersey Central Power and Light); Seneca (Pennsylvania Electric and Cleveland Electric Illuminating Company); Ludington (Consumers Power and Detroit Edison, and Bath County (Virginia Electric Power Company and Allegheny Power System, Inc.). Also investigated were several pumped storage projects which were never completed. These included Blue Ridge (American Electric Power); Cornwall (Consolidated Edison); Davis (Allegheny Power System, Inc.) and Kttatiny Mountain (General Public Utilities). Institutional, regulatory, technical, environmental, economic, and special issues at each project were investgated, and the conclusions relative to each issue are presented. The major barriers preventing the growth of energy storage are the high cost of these systems in times of extremely high cost of capital, diminishing load growth and regulatory influences which will not allow the building of large-scale storage systems due to environmental objections or other reasons. However, the future for energy storage looks viable despite difficult economic times for the utility industry. Joint-ownership can ease some of the economic hardships for utilites which demonstrate a need for energy storage.

Not Available

1982-05-01T23:59:59.000Z

491

Environmental Impacts From the Installation and Operation of Large-scale Solar Power Plants  

SciTech Connect (OSTI)

Large-scale solar power plants are being developed at a rapid rate, and are setting up to use thousands or millions of acres of land globally. The environmental issues related to the installation and operation phases of such facilities have not, so far, been addressed comprehensively in the literature. Here we identify and appraise 32 impacts from these phases, under the themes of land use intensity, human health and well-being, plant and animal life, geohydrological resources, and climate change. Our appraisals assume that electricity generated by new solar power facilities will displace electricity from traditional U.S. generation technologies. Altogether we find 22 of the considered 32 impacts to be beneficial. Of the remaining 10 impacts, 4 are neutral, and 6 require further research before they can be appraised. None of the impacts are negative relative to traditional power generation. We rank the impacts in terms of priority, and find all the high-priority impacts to be beneficial. In quantitative terms, large-scale solar power plants occupy the same or less land per kW h than coal power plant life cycles. Removal of forests to make space for solar power causes CO{sub 2} emissions as high as 36 g CO{sub 2} kW h{sup -1}, which is a significant contribution to the life cycle CO{sub 2} emissions of solar power, but is still low compared to CO{sub 2} emissions from coal-based electricity that are about 1100 g CO{sub 2} kW h{sup -1}.

Fthenakis, V.; Turney, Damon

2011-04-23T23:59:59.000Z

492

LUCI: A facility at DUSEL for large-scale experimental study of geologic carbon sequestration  

SciTech Connect (OSTI)

LUCI, the Laboratory for Underground CO{sub 2} Investigations, is an experimental facility being planned for the DUSEL underground laboratory in South Dakota, USA. It is designed to study vertical flow of CO{sub 2} in porous media over length scales representative of leakage scenarios in geologic carbon sequestration. The plan for LUCI is a set of three vertical column pressure vessels, each of which is {approx}500 m long and {approx}1 m in diameter. The vessels will be filled with brine and sand or sedimentary rock. Each vessel will have an inner column to simulate a well for deployment of down-hole logging tools. The experiments are configured to simulate CO{sub 2} leakage by releasing CO{sub 2} into the bottoms of the columns. The scale of the LUCI facility will permit measurements to study CO{sub 2} flow over pressure and temperature variations that span supercritical to subcritical gas conditions. It will enable observation or inference of a variety of relevant processes such as buoyancy-driven flow in porous media, Joule-Thomson cooling, thermal exchange, viscous fingering, residual trapping, and CO{sub 2} dissolution. Experiments are also planned for reactive flow of CO{sub 2} and acidified brines in caprock sediments and well cements, and for CO{sub 2}-enhanced methanogenesis in organic-rich shales. A comprehensive suite of geophysical logging instruments will be deployed to monitor experimental conditions as well as provide data to quantify vertical resolution of sensor technologies. The experimental observations from LUCI will generate fundamental new understanding of the processes governing CO{sub 2} trapping and vertical migration, and will provide valuable data to calibrate and validate large-scale model simulations.

Peters, C. A.; Dobson, P.F.; Oldenburg, C.M.; Wang, J. S. Y.; Onstott, T.C.; Scherer, G.W.; Freifeld, B.M.; Ramakrishnan, T.S.; Stabinski, E.L.; Liang, K.; Verma, S.

2010-10-01T23:59:59.000Z

493

Dynamics of large-scale solar-wind streams obtained by the double superposed epoch analysis  

E-Print Network [OSTI]

Using the OMNI data for period 1976-2000 we investigate the temporal profiles of 20 plasma and field parameters in the disturbed large-scale types of solar wind (SW): CIR, ICME (both MC and Ejecta) and Sheath as well as the interplanetary shock (IS). To take into account the different durations of SW types, we use the double superposed epoch analysis (DSEA) method: re-scaling the duration of the interval for all types in such a manner that, respectively, beginning and end for all intervals of selected type coincide. As the analyzed SW types can interact with each other and change parameters as a result of such interaction, we investigate separately 8 sequences of SW types: (1) CIR, (2) IS/CIR, (3) Ejecta, (4) Sheath/Ejecta, (5) IS/Sheath/Ejecta, (6) MC, (7) Sheath/MC, and (8) IS/Sheath/MC. The main conclusion is that the behavior of parameters in Sheath and in CIR are very similar both qualitatively and quantitatively. Both the high-speed stream (HSS) and the fast ICME play a role of pistons which push the pl...

Yermolaev, Yu I; Nikolaeva, N S; Yermolaev, M Yu

2015-01-01T23:59:59.000Z

494

Constraints on the Diverse Progenitors of GRBs from the Large-Scale Environments  

E-Print Network [OSTI]

The pursuit of the progenitors of short duration-hard spectrum gamma-ray bursts (SHBs) draws strongly upon similar quests for the origin of supernovae (SNe) and long duration-soft spectrum GRBs(LSBs). Indeed the notion that, in the absence of smoking guns, the progenitors of cosmic explosions betray their identities both on the global and local scale, motivates the study of SHB redshifts, host galaxies, and locations with respect to hosts. To this end, we suggest both a historical and emergent physical analogy of GRBs with SNe: long-soft GRBs are to core-collapsed supernovae as short-hard GRBs are to Type Ia supernovae ("LSB:CC::SHB:Ia''). Still, the SHB progenitor pursuit is just beginning and we caution that while there are some substantive differences between observations of LSBs and SHBs on large-scales, particularly in host demographics, neither the offset nor the redshift distributions of SHBs are statistically inconsistent with those of LSBs.

J. S. Bloom; J. X. Prochaska

2006-02-02T23:59:59.000Z

495

Collaborative Visualization for Large-Scale Accelerator Electromagnetic Modeling (Final Report)  

SciTech Connect (OSTI)

This report contains the comprehensive summary of the work performed on the SBIR Phase II, Collaborative Visualization for Large-Scale Accelerator Electromagnetic Modeling at Kitware Inc. in collaboration with Stanford Linear Accelerator Center (SLAC). The goal of the work was to develop collaborative visualization tools for large-scale data as illustrated in the figure below. The solutions we proposed address the typical problems faced by geographicallyand organizationally-separated research and engineering teams, who produce large data (either through simulation or experimental measurement) and wish to work together to analyze and understand their data. Because the data is large, we expect that it cannot be easily transported to each team member's work site, and that the visualization server must reside near the data. Further, we also expect that each work site has heterogeneous resources: some with large computing clients, tiled (or large) displays and high bandwidth; others sites as simple as a team member on a laptop computer. Our solution is based on the open-source, widely used ParaView large-data visualization application. We extended this tool to support multiple collaborative clients who may locally visualize data, and then periodically rejoin and synchronize with the group to discuss their findings. Options for managing session control, adding annotation, and defining the visualization pipeline, among others, were incorporated. We also developed and deployed a Web visualization framework based on ParaView that enables the Web browser to act as a participating client in a collaborative session. The ParaView Web Visualization framework leverages various Web technologies including WebGL, JavaScript, Java and Flash to enable interactive 3D visualization over the web using ParaView as the visualization server. We steered the development of this technology by teaming with the SLAC National Accelerator Laboratory. SLAC has a computationally-intensive problem important to the nations scientific progress as described shortly. Further, SLAC researchers routinely generate massive amounts of data, and frequently collaborate with other researchers located around the world. Thus SLAC is an ideal teammate through which to develop, test and deploy this technology. The nature of the datasets generated by simulations performed at SLAC presented unique visualization challenges especially when dealing with higher-order elements that were addressed during this Phase II. During this Phase II, we have developed a strong platform for collaborative visualization based on ParaView. We have developed and deployed a ParaView Web Visualization framework that can be used for effective collaboration over the Web. Collaborating and visualizing over the Web presents the community with unique opportunities for sharing and accessing visualization and HPC resources that hitherto with either inaccessible or difficult to use. The technology we developed in here will alleviate both these issues as it becomes widely deployed and adopted.

William J. Schroeder

2011-11-13T23:59:59.000Z

496

HEATMAP©CHP - The International Standard for Modeling Combined Heat and Power Systems  

E-Print Network [OSTI]

-CHP--central controlling program ? HEATMAP/AutoCAD Interface program ? HEATCALC--distribution network analysis program ? RELCOST-economic analysis program ? DOE-2 Plant Module-eentral plant. thermal storage and energy cost simulation program 114 ESL-IE-00... a comprehensive simuJation of proposed and existing combined heat and power (CHP) plant and system applications, The software model provides a fully integrated analysis of central power production plants that are linked to district energy...

Bloomquist, R. G.; O'Brien, R. G.

497

Spatial, temporal, and hybrid decompositions for large-scale vehicle routing with time windows  

SciTech Connect (OSTI)

This paper studies the use of decomposition techniques to quickly find high-quality solutions to large-scale vehicle routing problems with time windows. It considers an adaptive decomposition scheme which iteratively decouples a routing problem based on the current solution. Earlier work considered vehicle-based decompositions that partitions the vehicles across the subproblems. The subproblems can then be optimized independently and merged easily. This paper argues that vehicle-based decompositions, although very effective on various problem classes also have limitations. In particular, they do not accommodate temporal decompositions and may produce spatial decompositions that are not focused enough. This paper then proposes customer-based decompositions which generalize vehicle-based decouplings and allows for focused spatial and temporal decompositions. Experimental results on class R2 of the extended Solomon benchmarks demonstrates the benefits of the customer-based adaptive decomposition scheme and its spatial, temporal, and hybrid instantiations. In particular, they show that customer-based decompositions bring significant benefits over large neighborhood search in contrast to vehicle-based decompositions.

Bent, Russell W [Los Alamos National Laboratory

2010-01-01T23:59:59.000Z

498

Status of the large-scale dark-matter axion search  

SciTech Connect (OSTI)

If axions constitute the dark matter of our galactic halo they can be detected by their conversion into monochromatic microwave photons in a high-Q microwave cavity permeated by a strong magnetic field. A large-scale experiment is under construction at LLNL to search for halo axions in the mass range 1.3 - 13 {mu}eV, where axions may constitute closure density of the universe. The search builds upon two pilot efforts at BNL and the University of Florida in the late 1980`s, and represents a large improvement in power sensitivity ({approximately}50) both due to the increase in magnetic volume (B{sup 2}V = 14 T{sup 2}m{sup 3}), and anticipated total noise temperature (T{sub n} {approximately}3K). This search will also mark the first use of multiple power-combined cavities to extend the mass range accessible by this technique. Data will be analyzed in two parallel streams. In the first, the resolution of the power spectrum will be sufficient to resolve the expected width of the overall axion line, {approximately}{bigcirc} (1kHz). In the second, the resolution will be {bigcirc}(O.01-1 Hz) to look for extremely narrow substructure reflecting the primordial phase-space of the axions during infall. This experiment will be the first to have the required sensitivity to detect axions, for plausible axion models.

Van Bibber, K.; Hagmann, C.; Stoeffl, W. [Lawrence Livermore National Lab., CA (United States); Daw, E.; Rosenberg, L. [Massachusetts Institute of Technology, Cambridge, MA (United States). Dept. of Physics; Sikivie, P.; Sullivan, N.; Tanner, D. [Univ. of Florida, Gainesville, FL (United States). Dept. of Physics; Moltz, D.; Tighe, R. [Lawrence Berkeley Lab., CA (United States)] [and others

1994-09-01T23:59:59.000Z

499

The Large Scale Cosmic-Ray Anisotropy as Observed with Milagro  

E-Print Network [OSTI]

Results are presented of a harmonic analysis of the large scale cosmic-ray anisotropy as observed by the Milagro observatory. We show a two-dimensional display of the sidereal anisotropy projections in right ascension generated by the fitting of three harmonics to 18 separate declination bands. The Milagro observatory is a water Cherenkov detector located in the Jemez mountains near Los Alamos, New Mexico. With a high duty cycle and large field-of-view, Milagro is an excellent instrument for measuring this anisotropy with high sensitivity at TeV energies. The analysis is conducted using a seven year data sample consisting of more than 95 billion events. We observe an anisotropy with a magnitude around 0.1% for cosmic rays with a median energy of 6 TeV. The dominant feature is a deficit region of depth (-2.85 +/- 0.06 stat. +/- 0.08 syst.)x10^(-3) in the direction of the Galactic North Pole with a range in declination of -10 to 45 degrees and 150 to 225 degrees in right ascension. We observe a steady increase ...

Abdo, A A; Aune, T; Berley, D; Casanova, S; Chen, C; Dingus, B L; Ellsworth, R W; Fleysher, L; Fleysher, R; González, M M; Goodman, J A; Hoffman, C M; Hopper, B; Hüntemeyer, P H; Kolterman, B E; Lansdell, C P; Linnemann, J T; McEnery, J E; Mincer, A I; Némethy, P; Noyes, D; Ryan, J M; Parkinson, P M Saz; Shoup, A; Sinnis, G; Smith, A J; Sullivan, G W; Vasileiou, V; Walker, G P; Williams, D A; Yodh, G B

2008-01-01T23:59:59.000Z

500

The Large Scale Cosmic-Ray Anisotropy as Observed with Milagro  

E-Print Network [OSTI]

Results are presented of a harmonic analysis of the large scale cosmic-ray anisotropy as observed by the Milagro observatory. We show a two-dimensional display of the sidereal anisotropy pro jections in right ascension generated by the fitting of three harmonics to 18 separate declination bands. The Milagro observatory is a water Cherenkov detector located in the Jemez mountains near Los Alamos, New Mexico. With a high duty cycle and large field-of-view, Milagro is an excellent instrument for measuring this anisotropy with high sensitivity at TeV energies. The analysis is conducted using a seven year data sample consisting of more than 95 billion events, the largest such data set in existence. We observe an anisotropy with a magnitude around 0.1% for cosmic rays with a median energy of 6 TeV. The dominant feature is a deficit region of depth (2.49 +/- 0.02 stat. +/- 0.09 sys.)x10^(-3) in the direction of the Galactic North Pole centered at 189 degrees right ascension. We observe a steady increase in the magnitude of the signal over seven years.

A. A. Abdo; B. T. Allen; T. Aune; D. Berley; S. Casanova; C. Chen; B. L. Dingus; R. W. Ellsworth; L. Fleysher; R. Fleysher; M. M. Gonzalez; J. A. Goodman; C. M. Hoffman; B. Hopper; P. H. Hüntemeyer; B. E. Kolterman; C. P. Lansdell; J. T. Linnemann; J. E. McEnery; A. I. Mincer; P. Nemethy; D. Noyes; J. Pretz; J. M. Ryan; P. M. Saz Parkinson; A. Shoup; G. Sinnis; A. J. Smith; G. W. Sullivan; V. Vasileiou; G. P. Walker; D. A. Williams; G. B. Yodh

2009-04-20T23:59:59.000Z