National Library of Energy BETA

Sample records for large industrial service

  1. Ontario's Industrial Energy Services Program 

    E-Print Network [OSTI]

    Ploeger, L. K.

    1987-01-01

    stream_source_info ESL-IE-87-09-69.pdf.txt stream_content_type text/plain stream_size 13674 Content-Encoding ISO-8859-1 stream_name ESL-IE-87-09-69.pdf.txt Content-Type text/plain; charset=ISO-8859-1 ONTARIO'S INDUSTRIAL... ENERGY SERVICES PROGRAM LINDA K. PLOEGER, GENERAL MANAGER, INDUSTRY PROGRAMS ONTARIO MINISTRY OF ENERGY TORONTO, ONTARIO, ABSTRACT The Ontario Ministry of Energy began offering its new Industrial Energy Services Program (IESP) in early 1987...

  2. DOE Seeks Industry Participation for Engineering Services to...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Seeks Industry Participation for Engineering Services to Design Next Generation Nuclear Plant DOE Seeks Industry Participation for Engineering Services to Design Next Generation...

  3. SOLAR CENTER INFORMATION Industrial Extension Service

    E-Print Network [OSTI]

    -berm insulation. The house also uses compact fluorescent lighting, a ground- coupled heat pump, and has bothSOLAR CENTER INFORMATION Industrial Extension Service College of Engineering NCSU Box 7401 active solar water heating and photovoltaic (PV) systems. The Solar House was resided in for three years

  4. Current and future industrial energy service characterizations

    SciTech Connect (OSTI)

    Krawiec, F.; Thomas, T.; Jackson, F.; Limaye, D.R.; Isser, S.; Karnofsky, K.; Davis, T.D.

    1980-10-01

    Current and future energy demands, end uses, and cost used to characterize typical applications and resultant services in the industrial sector of the United States and 15 selected states are examined. A review and evaluation of existing industrial energy data bases was undertaken to assess their potential for supporting SERI research on: (1) market suitability analysis, (2) market development, (3) end-use matching, (3) industrial applications case studies, and (4) identification of cost and performance goals for solar systems and typical information requirements for industrial energy end use. In reviewing existing industrial energy data bases, the level of detail, disaggregation, and primary sources of information were examined. The focus was on fuels and electric energy used for heat and power purchased by the manufacturing subsector and listed by 2-, 3-, and 4-digit SIC, primary fuel, and end use. Projections of state level energy prices to 1990 are developed using the energy intensity approach. The effects of federal and state industrial energy conservation programs on future industrial sector demands were assessed. Future end-use energy requirements were developed for each 4-digit SIC industry and were grouped as follows: (1) hot water, (2) steam (212 to 300/sup 0/F, each 100/sup 0/F interval from 300 to 1000/sup 0/F, and greater than 1000/sup 0/F), and (3) hot air (100/sup 0/F intervals). Volume I details the activities performed in this effort.

  5. EIS-0123: Direct Service Industry Options

    Broader source: Energy.gov [DOE]

    BPA proposes to implement one or more options to reduce load fluctuations and revenue uncertainty resulting from its electrical service to 10 aluminum smelters and its other direct service industrial customers. BPA believes these options will give BPA greater ability to plan for power needs and help to maintain its relatively strong financial position during the current period of power surplus. They also are expected to enhance BPA's ability to repay the U.S. Treasury. In turn, BPA rates to other customers would stabilize.

  6. Pricing bundles of products and services in the high-tech industry

    E-Print Network [OSTI]

    Ferrer, Juan-Carlos O., 1970-

    2002-01-01

    The High-Tech industry faces tremendous complexity in product design because of the large number of different products that can be offered and the mix of products and services that exists. Information Technology (IT) ...

  7. Energy Department Applauds Nation's First Large-Scale Industrial...

    Office of Environmental Management (EM)

    Large-Scale Industrial Carbon Capture, Storage Plant Begins Construction The 15,000 square-foot sustainably designed National Sequestration Education Center, located at Richland...

  8. Energy Department Applauds Nation's First Large-Scale Industrial...

    Broader source: Energy.gov (indexed) [DOE]

    today's groundbreaking for construction of the nation's first large-scale industrial carbon capture and storage (ICCS) facility in Decatur, Illinois. Supported by the 2009...

  9. Abandoned Uranium Mine Technical Services and Cleanup Industry...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Abandoned Uranium Mine Technical Services and Cleanup Industry Day In January 2015, the United States (U.S.) and the Anadarko Litigation Trust ("Litigation Trust") entered into a...

  10. Design Considerations for Large Industrial Cogeneration Systems 

    E-Print Network [OSTI]

    Kovacik, J. M.

    1979-01-01

    Cogeneration systems have been contributing to the profitability of many industrial plants for years. However, with the renewed interest in energy and conservation as the cornerstone of the National Energy Act, it is important that the alternatives...

  11. Process Energy Audit for Large Industries 

    E-Print Network [OSTI]

    Chari, S.

    1993-01-01

    of the auditor, process improvements would be identified. A systems approach would be used in identifying process improvement. Task 12 ? Identification of Demand Side Management Technologies A derivative of Task 12 would be the identification of DSM... will consist of results of all the tasks. Example Audits. Having discussed the general audit procedure for a comprehensive audit, the following on a few energy intensive industries such as: ? cement ? chloralkalies ? foundry ? paper manufacturing...

  12. Large Industrial Renewable Energy Purchase Program (New Brunswick)

    Broader source: Energy.gov [DOE]

    Beginning January 1, 2012 the Large Industrial Renewable Energy Purchase Program allows NB Power to purchase renewable energy generated by its largest customers at a rate of $95/MWh. This...

  13. Congress and the Financial Services Industry, 1989-2008

    E-Print Network [OSTI]

    Clifford, Matthew Philip

    2009-01-01

    This thesis explores the congressional politics of the financial services industry in the United States between 1989 and 2008. Three approaches are pursued. First, I provide a detailed account of the major legislation ...

  14. BPA Letter announcing draft contract for Direct Service Industries...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    discussion with parties to help the agency decide the amount of power that it should offer to the direct-service industries (DSIs) and the terms of such offer. BPA published a...

  15. Evolution of the financial services industry in Europe and US

    E-Print Network [OSTI]

    Boyar, Pinar

    2009-01-01

    The thesis aims to address the long lasting phenomena of evolution of financial services industry both in US and Europe. The topic has never been more emphasized since the Great Depression. The dramatic fact of cost cutting ...

  16. Patterns of innovation in service industries

    E-Print Network [OSTI]

    Wong, Regan (Regan A.)

    2007-01-01

    Over the years, scholars studying technology-based innovation have uncovered patterns of success and failure. Many of the lessons learned from these observations can serve as powerful guidelines for leaders of industry as ...

  17. Asymmetry in In-Degree and Out-Degree Distributions of Large-Scale Industrial Networks

    E-Print Network [OSTI]

    Luo, Jianxi; Whitney, Daniel E.

    2015-01-01

    Network structures in industrial pricing: the effect ofrecession? ranking U.S. industrial sectors by the Power-of-distributions of large-scale industrial networks Jianxi Luo

  18. Cool Storage Economic Feasibility Analysis for a Large Industrial Facility 

    E-Print Network [OSTI]

    Fazzolari, R.; Mascorro, J. A.; Ballard, R. H.

    1988-01-01

    of Arizona Helicopter Co. Tucson, Arizona. Tucson, Arizona. Mesa. Arizona. ABSTRACT The analysis of economic feasibility for adding a cool storage facility to shift electric demand to off-peak hours for a large industrial facility is presented. DOE-2... thermal storage at McDonnell Douglas Helicopter CO. (MDH) in Mesa, Arimna [I]. MDH is a large assembly plant consisting of eleven air conditioned buildings totalling 2,000.000 square feet of diversified activities. The site has a central chilled water...

  19. Direct Service Industries (DSI) (pbl/contracts)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HAB PacketDiesel prices continueDileep SinghLeadershipDirect Service

  20. ETHICS, HONOR, AND SERVICE IN THE PROFESSION OF INDUSTRIAL ENGINEERING

    E-Print Network [OSTI]

    ETHICS, HONOR, AND SERVICE IN THE PROFESSION OF INDUSTRIAL ENGINEERING James R. Wilson December 20, 1995 1. Introduction First I congratulate each of our graduates on their accession to the profession to society but also to uphold the honor and dignity of their profession by adhering to the highest standards

  1. A Study of Customer Service, Customer Satisfaction and Service Quality in the Logistics Function of the UK Food Processing Industry 

    E-Print Network [OSTI]

    Grant, David Bruce

    The aim of this thesis is to test the importance and sufficiency of existing constructs of customer service, customer satisfaction and service quality in the logistics function of the UK food processing industry. These ...

  2. Opportunities and Challenges for Water and Wastewater Industries to Provide Exchangeable Services

    SciTech Connect (OSTI)

    Sparn, Bethany; Hunsberger, Randolph

    2015-11-13

    Water and wastewater treatment plants and distribution systems use significant amounts of energy, around 2 - 4% of the total electricity used in the US, and their energy use is projected to increase as populations increase and regulations become more stringent. Water and wastewater systems have largely been disconnected from the electric utilities' efforts to improve energy efficiency and provide energy efficiency and provide grid services, likely because their core mission is to provide clean water and treated wastewater. Energy efficiency has slowly crept into the water and wastewater industry as the economic benefit has become more apparent, but there is still potential for significant improvement. Some of the larger, more progressive water utilities are starting to consider providing grid services; however, it remains a foreign concept to many. This report explores intrinsic mechanisms by which the water and wastewater industries can provide exchangeable services, the benefit to the parties involved, and the barriers to implementation. It also highlights relevant case studies and next steps. Although opportunities for increasing process efficiencies are certainly available, this report focuses on the exchangeable services that water and wastewater loads can provide to help maintain grid reliability, keep overall costs down, and increase the penetration of distributed renewables on the electric grid. These services have potential to provide water utilities additional value streams, using existing equipment with modest or negligible upgrade cost.

  3. A Reconfigurable Fabric for Accelerating Large-Scale Datacenter Services

    E-Print Network [OSTI]

    Hauck, Scott

    A Reconfigurable Fabric for Accelerating Large-Scale Datacenter Services Andrew Putnam, Adrian M, Doug Burger Abstract To advance datacenter capabilities beyond what commodity server designs can,632 servers and FPGAs in a production datacenter and successfully used to accelerate the ranking portion

  4. Services and the Business Models of Product Firms: An Empirical Analysis of the Software Industry

    E-Print Network [OSTI]

    Suarez, Fernando F.

    Some product firms increasingly rely on service revenues as part of their business models. One possible explanation is that they turn to services to generate additional profits when their product industries mature and ...

  5. Financing the growth of energy efficiency service industry in Shanghai

    E-Print Network [OSTI]

    Lin, Jiang; Gilligan, Donald; Zhao, Yinghua

    2005-01-01

    capacity to use to finance an energy-saving project. Becausefinance for other reasons. Industrial customers typically expected a very short payback on energyfinance industrial and commercial projects. The resistance of commercial and industrial customers to implementing energy

  6. The Analysis and Development of Large Industrial Steam Systems 

    E-Print Network [OSTI]

    Waterland, A. F.

    1980-01-01

    Chemicals, petroleum, pulp and paper, and many other industries depend heavily on extensive complex steam systems for thermal and mechanical energy delivery. Steam's versatility and desirable characteristics as both a heat transfer medium and a...

  7. Next generation solutions for the energy services industry

    E-Print Network [OSTI]

    Kumar, Satish; Kromer, Steve

    2006-01-01

    in energy prices. The energy service providers will need toUncertainties Energy Service Providers Figure 2. Theenergy projects are evaluated both on the client side as well as on the service provider

  8. Energy Management Services for the Industrial Market Segment at TVA 

    E-Print Network [OSTI]

    Hamby, R. E.; Knight, V. R.

    1984-01-01

    The Tennessee Valley Authority has provided energy management surveys (EMSs) to commercial and industrial power consumers since 1979. A significant number of EMSs have been performed to a variety of industry types and sizes. As in all developmental...

  9. Opportunities for Quick Response Product and Service Suppliers: The Wood Products Industry

    E-Print Network [OSTI]

    Opportunities for Quick Response Product and Service Suppliers: The Wood Products Industry Working University Agricultural Center #12;2 February 8, 1995 #12;3 Quick Response Products and Service Suppliers, 104 suppliers of Quick Response (EDI and Automatic Identification) products and services were surveyed

  10. Developing an energy efficiency service industry in Shanghai

    SciTech Connect (OSTI)

    Lin, Jiang; Goldman, Charles; Levine, Mark; Hopper, Nicole

    2004-02-10

    The rapid development of the Chinese economy over the past two decades has led to significant growth in China's energy consumption and greenhouse gas (GHG) emissions. Between 1980 and 2000, China's energy consumption more than doubled from 602 million to 1.3 billion tons of coal-equivalent (NBS, 2003). In 2000, China's GHG emissions were about 12% of the global total, ranked second behind only the US. According to the latest national development plan issued by the Chinese government, China's energy demand is likely to double again by 2020 (DRC, 2004), based on a quadrupling of its gross domestic product (GDP). The objectives of the national development plan imply that China needs to significantly raise the energy efficiency of its economy, i.e., cutting the energy intensity of its economy by half. Such goals are extremely ambitious, but not infeasible. China has achieved such reductions in the past, and its current overall level of energy efficiency remains far behind those observed in other developed economies. However, challenges remain whether China can put together an appropriate policy framework and the institutions needed to improve the energy efficiency of its economy under a more market-based economy today. Shanghai, located at the heart of the Yangtze River Delta, is the most dynamic economic and financial center in the booming Chinese economy. With 1% of Chinese population (13 million inhabitants), its GDP in 2000 stood at 455 billion RMB yuan (5% of the national total), with an annual growth rate of 12%--much higher than the national average. It is a major destination for foreign as well as Chinese domestic investment. In 2003, Shanghai absorbed 10% of actual foreign investment in all China (''Economist'', January 17-23, 2004). Construction in Shanghai continues at a breakneck pace, with an annual addition of approximately 200 million square foot of residential property and 100 million square foot of commercial and industrial space over the last 5 years. It is one reason that China consumed over 60% of the world's cement production in 2003 (NBS 2004). Energy consumption in Shanghai has been growing at 6-8% annually, with the growth of electricity demand at over 10% per year. Shanghai, with very limited local energy resources, relies heavily on imported coal, oil, natural gas, and electricity. While coal still constitutes over half of Shanghai's energy consumption, oil and natural gas use have been growing in importance. Shanghai is the major market for China's West to East (natural gas) Pipeline (WEP). With the input from WEP and off-shore pipelines, it is expected that natural gas consumption will grow from 250 million cubic meters in 2000 to 3000-3500 million cubic meters in 2005. In order to secure energy supply to power Shanghai's fast-growing economy, the Shanghai government has set three priorities in its energy strategy: (1) diversification of its energy structure, (2) improving its energy efficiency, and (3) developing renewable and other cleaner forms of energy. Efficiency improvements are likely to be most critical, particularly in the near future, in addressing Shanghai's energy security, especially the recent electricity shortage in Shanghai. Commercial buildings and industries consume the majority of Shanghai's, as well as China's, commercial energy. In the building sector, Shanghai has been very active implementing energy efficiency codes for commercial and residential buildings. Following a workshop on building codes implementation held at LBNL for senior Shanghai policy makers in 2001, the Shanghai government recently introduced an implementation guideline on residential building energy code compliance for the downtown area of Shanghai to commence in April, 2004, with other areas of the city to follow in 2005. A draft code for commercial buildings has been developed as well. In the industrial sector, the Shanghai government started an ambitious initiative in 2002 to induce private capital to invest in energy efficiency improvements via energy management/services companies (EMC/ESCOs). In partic

  11. Deregulation in Japanese gas industries : significance and problems of gas rate deregulation for large industrial customers

    E-Print Network [OSTI]

    Inoue, Masayuki

    1994-01-01

    In recent years, the circumstances surrounding Japanese City gas industries have been changing drastically. On one hand, as energy suppliers, natural gas which has become major fuel resource for city gas, as public utilities, ...

  12. DOE Seeks Industry Participation for Engineering Services to...

    Broader source: Energy.gov (indexed) [DOE]

    cutting-edge technology in the effort to reduce greenhouse gas emissions by enabling nuclear energy to replace fossil fuels in the petrochemical and transportation industries....

  13. In high-tech industries, large amounts of reliable, high-quality

    E-Print Network [OSTI]

    In high-tech industries, large amounts of reliable, high-quality power are critical to information processing networks--industry giant Verizon Telecommunications uses over 5.1 billion kWh annually. Because with the grid, three reciprocating engines, two absorption chillers, and a heat recovery steam generator (HRSG

  14. U.S. Energy Service Company Industry: Market Size and Project Performance from 1990-2008

    E-Print Network [OSTI]

    Larsen, Peter

    2014-01-01

    company (ESCO) industry. ” ”Energy Policy; 33:691–704.of Ratepayer-Funded Energy Efficiency in the U.S. ” LawrenceS. Rezessy and E. Vine, 2006. “Energy service companies in

  15. Marine metagenomic infrastructure services as driver for research and industrial innovation

    E-Print Network [OSTI]

    Bongo, Lars Ailo

    Marine metagenomic infrastructure services as driver for research and industrial innovation Lars-EBI) · Participants: ­ Calouste Gulbenkian Foundation (Portugal) ­ CCMAR ­ Center for Marine Sciences (Portugal;Marine Metagenomics · Marine genomics and metagenomics are rapidly expanding · Need customized data

  16. Applying Service Oriented Architecture in the Aerospace Industry Jurga Kazlauskaite, Arsalan Minhas, F. H. Vogt

    E-Print Network [OSTI]

    Turau, Volker

    1 Applying Service Oriented Architecture in the Aerospace Industry Jurga Kazlauskaite, Arsalan at SRI International in Menlo Park and as a visiting researcher at the International Computer Science in the aerospace and shipping industries. #12;2 1. Introduction As a result of mass customisation and due

  17. Hydranet: network support for scaling of large scale servic es 

    E-Print Network [OSTI]

    Chawla, Hamesh

    1998-01-01

    is based on replicating transport level service access points (TSAPS) for transparent distribution or replication of IP services. Measurements on a local testbed show that the overhead of our scheme is small. TSAP replication is widely applicable. We use...

  18. Benefit from Web services in the mobile Internet industry

    E-Print Network [OSTI]

    Ikeda, Daizo, 1974-

    2004-01-01

    Over the past five years, mobile Internet services in Japan have seen major expansion as a result of collaboration between mobile operators acting as mobile portal providers, and their complementors, namely, content ...

  19. Services-Led Industrialization in India: Assessment and Lessons

    E-Print Network [OSTI]

    Singh, Nirvikar

    2006-01-01

    Cambridge MA, pp. 188-219. Kuznets, S. (1959), Six Lecturesto services” (e.g. , Kuznets, 1959; Kaldor, 1966; Pack andwords, the environmental Kuznets curve may be flatter in

  20. Ambient RFID Services Infrastructure & RFID Deployment in Wood industry

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    a comparative study of different control systems, like Holonic Manufacturing Systems (HMS) or Product workshop and the planning system, has been developed to answer to a mass production context, that is to say of the bottleneck and the service level. To achieve to these objectives a Product information based control project

  1. Transient Analysis of Large-scale Stochastic Service Systems 

    E-Print Network [OSTI]

    Ko, Young Myoung

    2012-07-16

    accelerating parameters, thereby establishing some useful mathematical frameworks and giving insights into important characteristics and intuitions. However, some studies show significant limitations when used to approximate real service systems: (i...

  2. Industrial Plant Services Australia Pty Ltd IPS | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View NewTexas: Energy ResourcesOrder at 8, 13 (Vt. WaterInformationPlant Services Australia Pty

  3. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    Planta- tion Products and Paper Industry Council, Paper Industry, Confederationof European Paper Industries, Brussels, March 2001. CESP,

  4. Efficient Nonlinear Optimization with Rigorous Models for Large Scale Industrial Chemical Processes 

    E-Print Network [OSTI]

    Zhu, Yu

    2011-08-08

    of Department, Michael Pishko May 2011 Major Subject: Chemical Engineering iii ABSTRACT Efficient Nonlinear Optimization with Rigorous Models for Large Scale Industrial Chemical Processes. (May 2011) Yu Zhu, B.S., Zhejiang University; M.S., Zhejiang... . . . . . . . . . . . . . . . . . . . . . . . . . . 1 A. Nonlinear Optimization with Rigorous Large Scale Models 1 B. Chemical Applications of Nonlinear Optimization . . . . . 2 1. Design under Uncertainty . . . . . . . . . . . . . . . . 3 2. Optimal Operations with Steady State Models . . . . 4...

  5. 2011 SUPRI-A Industrial Advisory Committee Meeting Stanford University, Black Community Services Center

    E-Print Network [OSTI]

    Stanford University

    2011 SUPRI-A Industrial Advisory Committee Meeting Stanford University, Black Community Services Diatomite and Steam 10:15 10:30 Fractured Diatomites Have Feelings Too, Bolivia Vega 10:30 10:45 Effects of Thermal EOR Processes on Opal-A Diatomites, Cindy Ross 10:45 11:00 Steam Injection & Heat Loss Calculation

  6. 2010 SUPRI-A Industrial Advisory Committee Meeting April 22 and 23, Black Community Services Center

    E-Print Network [OSTI]

    Stanford University

    2010 SUPRI-A Industrial Advisory Committee Meeting April 22 and 23, Black Community Services Center Drainage Using Steam and Noncondensable Gases, Khalid Alnoaimi 10:30 10:45 Break 10:45 11:15 Alkali in Heterogeneous Media, Monrawee Pancharoen 11:45 12:15 Improving Steam-Assisted Gravity Drainage Using Mobility

  7. Opportunities for UPC Product and Service Suppliers: The Wood Products Industry

    E-Print Network [OSTI]

    Wu, Qinglin

    Opportunities for UPC Product and Service Suppliers: The Wood Products Industry Working Paper #4, profitability and competitiveness through point-of-sale scanning. Home center suppliers have been encouraged competitors. Accordingly, wood products suppliers have begun the process of adopting UPC capabilities to serve

  8. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    for the European Pulp and Paper Industry, Confederation ofin food and pulp and paper industry wastes, turbines tocement, and pulp and paper industries and in the control of

  9. Page Digest for Large-Scale Web Services Daniel Rocco, David Buttler, Ling Liu

    E-Print Network [OSTI]

    Liu, Ling

    Page Digest for Large-Scale Web Services Daniel Rocco, David Buttler, Ling Liu Georgia Institute, 2003 Abstract The rapid growth of the World Wide Web and the Internet has fueled interest in Web services and the Semantic Web, which are quickly becoming important parts of modern electronic commerce

  10. Asymmetry in in-degree and out-degree distributions of large-scale industrial networks

    E-Print Network [OSTI]

    Luo, Jianxi

    2015-01-01

    Many natural, physical and social networks commonly exhibit power-law degree distributions. In this paper, we discover previously unreported asymmetrical patterns in the degree distributions of incoming and outgoing links in the investigation of large-scale industrial networks, and provide interpretations. In industrial networks, nodes are firms and links are directed supplier-customer relationships. While both in- and out-degree distributions have "power law" regimes, out-degree distribution decays faster than in-degree distribution and crosses it at a consistent nodal degree. It implies that, as link degree increases, the constraints to the capacity for designing, producing and transmitting artifacts out to others grow faster than and surpasses those for acquiring, absorbing and synthesizing artifacts provided from others. We further discover that this asymmetry in decaying rates of in-degree and out-degree distributions is smaller in networks that process and transmit more decomposable artifacts, e.g. info...

  11. Proposal for the award of an industrial support contract for radiation monitoring services for LEP dismantling

    E-Print Network [OSTI]

    2000-01-01

    This document concerns the award of an Industrial Service contract for radiation monitoring services for LEP dismantling. Following a market survey carried out among 34 firms in nine Member States, a call for tenders (IT-2769/SL/LEP) was sent on 13 March 2000 to seven firms and three consortia in five Member States. By the closing date, CERN had received six tenders from three firms and three consortia in four Member States. The Finance Committee is invited to agree to the negotiation of a contract with the consortium ISS MULTISERVICE (CH), NFI (SE) and ISS GEBÄUDESERVICE (DE), the lowest technically qualified bidder, for radiation monitoring services for LEP dismantling for a total amount of 990 792 Swiss francs, not subject to revision. The firm has indicated the following distribution by country of the contract value covered by this adjudication proposal: CH-59%, DE-26%, SE-15%.

  12. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    pp. IEA, 2006b: Industrial motor systems energy efficiency:industrial energy efficiency. Presented at Energy Efficiency in Motorenergy-efficient electric motors and motor-systems. These include: (1) industrial

  13. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    and waste management that take place within industrialpolicies Waste management policies can reduce industrialWaste management policies.56 7.10 Co-benefits of industrial

  14. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    R.R. ,et al. , 2004: Eco-industrial park initiatives in theCHP plant) form an eco-industrial park that serves as an ex-

  15. Select-service hotels : a guide to understanding the lodging industry and one of its most attractive segments

    E-Print Network [OSTI]

    Berger, Brandon B. (Brandon Brooks)

    2007-01-01

    This thesis serves as a pedagogical guide to the hospitality industry, and presents a broad overview of the unique issues that arise through the development, ownership and management of select-service franchised hotels. ...

  16. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    cement and pulp and paper industries in China, and in thePulp and Paper Industry, Confederation of European Paper Industries, Brussels, March 2001. CESP, 2004: China’pulp and paper industries (GOI, 2005). There are 39.8 million SMEs in China,

  17. PROCEEDINGS OF 1976 SUMMER WORKSHOP ON AN ENERGY EXTENSION SERVICE

    E-Print Network [OSTI]

    Authors, Various

    2010-01-01

    and industrial plants with large service or domestic hot water requirements,coupled with large air condi- tioning or heat pump

  18. Invited viewpoint in Industrial Robot (2005), 32:6, p.437 The What and When of Service Robotics

    E-Print Network [OSTI]

    Bugmann, Guido

    2005-01-01

    Invited viewpoint in Industrial Robot (2005), 32:6, p.437 The What and When of Service Robotics Guido Bugmann Robotics Intelligence Laboratory School of Computing, Communications and Electronics University of Plymouth, Drake Circus, Plymouth PL4 8AA, United Kingdom Service robotics is the area

  19. U.S. Energy Service Company Industry: Market Size and Project Performance from 1990-2008

    SciTech Connect (OSTI)

    Larsen, Peter; Goldman, Charles; Satchwell, Andrew

    2012-08-21

    The U.S. energy service company (ESCO) industry is an example of a private sector business model where energy savings are delivered to customers primarily through the use of performance-based contracts. This study was conceived as a snapshot of the ESCO industry prior to the economic slowdown and the introduction of federal stimulus funding mandated by enactment of the American Recovery and Reinvestment Act of 2009 (ARRA). This study utilizes two parallel analytic approaches to characterize ESCO industry and market trends in the U.S.: (1) a ?top-down? approach involving a survey of individual ESCOs to estimate aggregate industry activity and (2) a ?bottom-up? analysis of a database of ~;;3,250 projects (representing over $8B in project investment) that reports market trends including installed EE retrofit strategies, project installation costs and savings, project payback times, and benefit-cost ratios over time. Despite the onset of a severe economic recession, the U.S. ESCO industry managed to grow at about 7percent per year between 2006 and 2008. ESCO industry revenues were about $4.1 billion in 2008 and ESCOs anticipate accelerated growth through 2011 (25percent per year). We found that 2,484 ESCO projects in our database generated ~;;$4.0 billion ($2009) in net, direct economic benefits to their customers. We estimate that the ESCO project database includes about 20percent of all U.S. ESCO market activity from 1990-2008. Assuming the net benefits per project are comparable for ESCO projects that are not included in the LBNL database, this would suggest that the ESCO industry has generated ~;;$23 billion in net direct economic benefits for customers at projects installed between 1990 and 2008. There is empirical evidence confirming that the industry is evolving by installing more comprehensive and complex measures?including onsite generation and measures to address deferred maintenance?but this evolution has significant implications for customer project economics, especially at K-12 schools. We found that the median simple payback time has increased from 1.9 to 3.2 years in private sector projects since the early-to-mid 1990s and from 5.2 to 10.5 years in public sector projects for the same time period.

  20. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    specified in the ‘Energy Technology List’ during the yearenergy consumers in the chemical industry, and list examples of technology

  1. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    disposal routes, several countries have set incen- tives to promote the use of various wastes in industrial processes in direct

  2. Estimating Demand Response Market Potential Among Large Commercialand Industrial Customers:A Scoping Study

    SciTech Connect (OSTI)

    Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan,Bernie; Cappers, Peter

    2007-01-01

    Demand response is increasingly recognized as an essentialingredient to well functioning electricity markets. This growingconsensus was formalized in the Energy Policy Act of 2005 (EPACT), whichestablished demand response as an official policy of the U.S. government,and directed states (and their electric utilities) to considerimplementing demand response, with a particular focus on "price-based"mechanisms. The resulting deliberations, along with a variety of stateand regional demand response initiatives, are raising important policyquestions: for example, How much demand response is enough? How much isavailable? From what sources? At what cost? The purpose of this scopingstudy is to examine analytical techniques and data sources to supportdemand response market assessments that can, in turn, answer the secondand third of these questions. We focus on demand response for large(>350 kW), commercial and industrial (C&I) customers, althoughmany of the concepts could equally be applied to similar programs andtariffs for small commercial and residential customers.

  3. Electronic copy available at: http://ssrn.com/abstract=2014754 Joshua M. Pearce, "Industrial Symbiosis for Very Large Scale Photovoltaic

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Symbiosis for Very Large Scale Photovoltaic Manufacturing", Renewable Energy 33, pp. 11011108, 2008. http://dx.doi.org/10.1016/j.renene.2007.07.002 Industrial Symbiosis of Very Large Scale Photovoltaic Manufacturing. Solar photovoltaic (PV) cells offer a technically sustainable solution to the projected enormous future

  4. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    of its electricity requirements in the USA (US DOE, 2002)USA, where motor-driven systems account for 63% of industrial electricity

  5. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    increased use of biomass and energy efficiency improvements,Moreira, J. , 2006: Global biomass energy potential. Journal1971–2004 Notes 1) Biomass energy included 2) Industrial

  6. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    of Industrial Electrical Switchgear and Control Gear in the6 from use in electrical switchgear and magnesium processinggas insulated electrical switchgear, during the production

  7. KEITH SCHAEFER brings more than 25 years of leadership experience to his position of Chairman, City Paper Box, an international manufacturer of paper products serving the food service industry. Throughout his career, he has held a

    E-Print Network [OSTI]

    Sibille, Etienne

    Paper Box, an international manufacturer of paper products serving the food service industry. Throughout

  8. A ranking and exploration service based on large-scale usage data

    SciTech Connect (OSTI)

    Bollen, Johan [Los Alamos National Laboratory; Van De Sompel, Herbert L [Los Alamos National Laboratory; Balakireva, Lyudmila L [Los Alamos National Laboratory; Chute, Ryan M [Los Alamos National Laboratory

    2008-01-01

    This poster presents the architecture and user interface of a prototype service that was designed to allow end-users to explore the s tructure of science and perform assessments of scholarly impact on the basis of large-scale usage data. The underlying usage data set was constructed by the NIESUR project which collected 1 billion usage events from a wide range of publishers, aggregators and institutional consortia.

  9. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    options for combined heat and power in Canada. Office ofpolicies to promote combined heat and power in US industry.conversions, such as combined heat and power and coke ovens,

  10. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    iron and steel production. IEA Greenhouse Gas R&D Programme,tempera- ture range. IEA/Caddet, Sittard, The Netherlands.industry. Cheltenham, UK, IEA Greenhouse Gas R&D Programme,

  11. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    developing countries, like India, adoption of efficient electricitydeveloping countries the sugar in- dustry uses bagasse and the edible oils industry uses byproduct wastes to generate steam and/or electricity (

  12. Proceedings of the 2009 Industrial Engineering Research Conference Developing a Curriculum in Service Systems Engineering

    E-Print Network [OSTI]

    Onder, Nilufer

    Proceedings of the 2009 Industrial Engineering Research Conference Developing a Curriculum slowly to this change. Although some Industrial Engineering (IE) undergraduate programs have added community has responded slowly to this change. Although some Industrial Engineering undergraduate programs

  13. Industry

    SciTech Connect (OSTI)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of industrial mitigation for sustainable development is discussed in Section 7.7. Section 7.8 discusses the sector's vulnerability to climate change and options for adaptation. A number of policies have been designed either to encourage voluntary GHG emission reductions from the industrial sector or to mandate such reductions. Section 7.9 describes these policies and the experience gained to date. Co-benefits of reducing GHG emissions from the industrial sector are discussed in Section 7.10. Development of new technology is key to the cost-effective control of industrial GHG emissions. Section 7.11 discusses research, development, deployment and diffusion in the industrial sector and Section 7.12, the long-term (post-2030) technologies for GHG emissions reduction from the industrial sector. Section 7.13 summarizes gaps in knowledge.

  14. Pricing and licensing of software products and services : a study on industry trends

    E-Print Network [OSTI]

    Nayak, Shivashis

    2006-01-01

    The software product business reached the $150 billion mark at the end of 2005. The pricing and licensing of new products, maintenance services, services and service maintenance have become an important strategy to deliver ...

  15. ISSUANCE 2015-12-17: Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards for Small, Large, and Very Large Air-Cooled Commercial Package Air Conditioning and Heating Equipment and Commercial Warm Air Furnaces

    Office of Energy Efficiency and Renewable Energy (EERE)

    Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards for Small, Large, and Very Large Air-Cooled Commercial Package Air Conditioning and Heating Equipment and Commercial Warm Air Furnaces, Supplemental Notice of Proposed Rulemaking

  16. ISSUANCE 2015-12-17: Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards for Small, Large, and Very Large Air-Cooled Commercial Package Air Conditioning and Heating Equipment and Commercial Warm Air Furnaces

    Office of Energy Efficiency and Renewable Energy (EERE)

    Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards for Small, Large, and Very Large Air-Cooled Commercial Package Air Conditioning and Heating Equipment and Commercial Warm Air Furnaces

  17. Supply chain risk management : (redefining the audit function within a large industrial company)

    E-Print Network [OSTI]

    Fike, Randy L. (Randy Lynn)

    2005-01-01

    As supply chains become more sophisticated, difficulties with their operation can become more complex as well. An organization must ensure the flow of goods and services end- to-end across the supply chain at the promised ...

  18. Employment Forecasts for Ohio's Primary Metals Manufacturing and Administrative and Support Services Industries

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    that are outperforming the industry average. Additional research shows that the industry is reactive to manufacturingEmployment Forecasts for Ohio's Primary Metals Manufacturing and Administrative and Support, the primary metals manufacturing industry (NAICS 331000) employment in Ohio is forecasted to decline by 21

  19. Benefits of Multi-day Industrial Center Assessments for Large Energy-Intensive Facilities 

    E-Print Network [OSTI]

    Heffington, W.M.; Eggebrecht, J.A.

    2003-01-01

    of information resources and tools, technical assistance, and by demonstrating new technologies (U.S. Department of Energy 2003A). The IAC program and showcase demonstrations are part of a suite of Best Practices available to plants. The DOE-sponsored IAC... of energy efficiency, renewable energy, environmental benefits and productivity (U.S. Department of Energy 2003A). DOE sponsors showcases in partnership with industry and state IOF efforts, and the IAC at Texas A&M University (TAMU) has participated...

  20. HPC-Colony: Services and Interfaces to Aupport Systems With Very Large Numbers of Processors

    SciTech Connect (OSTI)

    Jones, T; Kale, L; Moreira, J; Mendes, C; Chakravorty, S; Tauferner, A; Inglett, T

    2007-01-31

    The HPC-Colony Project, a collaboration with Lawrence Livermore National Laboratory, the University of Illinois at Urbana-Champaign and IBM, is focused on services and interfaces for very large numbers of processors. Advances in parallel systems in the last decade have delivered phenomenal progress in the overall capability available to a single parallel application. Several systems with peak capability of over 100TF are already available and systems are expected to exceed 1PF within a few years. Despite these impressive advances in peak performance capability, the sustained performance of these systems continues to fall as a percentage of the peak capability. Initial analysis suggests that key architectural bottlenecks (in hardware and software) are responsible for the lower sustained performance and some architectural change of direction may be necessary to address the declining sustained performance. In this proposal we focus on addressing software architectural bottlenecks, in the areas of operating system and runtime systems. While the trend towards larger processor counts benefits application developers through more processing power, it also challenges application developers to harness ever-increasing numbers of processors for productive work. Much of the burden falls to operating systems and runtime systems that were originally designed for much smaller processor counts. Under the Colony project, we are researching and developing system software to enable general purpose operating and runtime systems for tens of thousands of processors. Difficulties in achieving a balanced partitioning and dynamically scheduling workloads can limit scaling for complex problems on large machines. Scientific simulations that span components of large machines require common operating system services, such as process scheduling, event notification, and job management to scale to large machines. Today, application programmers must explicitly manage these resources. We address scaling issues and porting issues by delegating resource management tasks to a sophisticated parallel OS. Our definition of ''managing resources'' includes balancing CPU time, network utilization, and memory usage across the entire machine. We believe a consistent environment that provides newly necessary technology (such as fault tolerance) will also provide important efficiencies in system administration. The primary objective of the Colony Project is to develop technologies that enable application scientists to easily scale applications to computing platforms comprised of tens of thousands to hundreds of thousands of compute cores. This will be accomplished by addressing several problem areas that are known to be key factors when scaling applications to tens of thousands of processors. First, by providing a smart runtime system to quickly and dynamically make cpu and memory and interconnect resource management adjustments, we remove the burden of achieving applications that are highly tuned and load-balanced for a particular execution instance (i.e. a particular input datasets and machine platform combination). Second, by providing a full complement of system services including the entire Linux system call set, we ease the challenge of developing portable applications since lightweight kernels frequently incorporate only a small subset of the POSIX calls prevalent in typical large scientific applications. Third, by providing fundamental changes to the Linux kernel that reduce variability in context switch times and provide for parallel-aware scheduling across the entire machine, we remove the negative impact of synchronizing collectives on bulk-synchronous applications. Fourth, by providing fault tolerance mechanisms that utilize our unique migration abilities in conjunction with in-memory techniques for minimal overhead, we eliminate the necessity for costly frequent application-driven check-points. Our research utilizes full implementations of these technologies on systems consisting of tens of thousands of processors.

  1. Estimating Demand Response Market Potential Among Large Commercial and Industrial Customers: A Scoping Study

    E-Print Network [OSTI]

    Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan, Bernie; Cappers, Peter

    2007-01-01

    3–6 percent of non-residential peak demand, can be viewed as3–6 percent of non-residential peak demand, can be viewed asto large, non-residential customers with peak demand greater

  2. Large-Scale Longitudinal Analysis of SOAP-Based and RESTful Web Services Wei Jiang1,2, Dongwon Lee3, Songlin Hu1

    E-Print Network [OSTI]

    Lee, Dongwon

    Large-Scale Longitudinal Analysis of SOAP-Based and RESTful Web Services Wei Jiang1,2, Dongwon Lee3,husonglin}@ict.ac.cn, dongwon@psu.edu Abstract--While the usage of web services has increased explosively in recent years, very few studies examined the characteristics of web services using large-scale real data for a long period

  3. A cross-industry analysis and framework of aftermarket products and services

    E-Print Network [OSTI]

    Englezos, Petros

    2006-01-01

    This thesis looks at how supply chains of Aftermarket Products and Services are structured. The study includes an overall examination of the Aftermarket Function, as well as an overview and examination of Aftermarket Supply ...

  4. An analysis of reverse logistics technology and service for hi-tech industry

    E-Print Network [OSTI]

    Li, Jinfan, 1976-

    2004-01-01

    This thesis provides a method for hi-tech companies to evaluate reverse logistic software and services. To clarify what is reverse logistics, the definition and features of reverse logistics are first introduced. The reasons ...

  5. Evolution of the U.S. Energy Service Company Industry: Market Size and Project Performance from 1990-2008

    SciTech Connect (OSTI)

    Larsen, Peter; Goldman, Charles A.; Satchwell, Andrew

    2012-05-08

    The U.S. energy service company (ESCO) industry is an example of a private sector business model where energy savings are delivered to customers primarily through the use of performance-based contracts. This study was conceived as a snapshot of the ESCO industry prior to the economic slowdown and the introduction of federal stimulus funding mandated by enactment of the American Recovery and Reinvestment Act of 2009 (ARRA). This study utilizes two parallel analytic approaches to characterize ESCO industry and market trends in the U.S.: (1) a “top-down” approach involving a survey of individual ESCOs to estimate aggregate industry activity and (2) a “bottom-up” analysis of a database of -3,265 projects (representing over $8B in project investment) that reports market trends including installed EE retrofit strategies, project installation costs and savings, project payback times, and benefit-cost ratios over time. Despite the onset of an economic recession, the U.S. ESCO industry managed to grow at about 7% per year between 2006 and 2008. ESCO industry revenues are relatively small compared to total U.S. energy expenditures (about $4.1 billion in 2008), but ESCOs anticipated accelerated growth through 2011 (25% per year). We found that 2,484 ESCO projects in our database generated -$4.0 billion ($2009) in net, direct economic benefits to their customers. We estimate that the ESCO project database includes about 20% of all U.S. ESCO market activity from 1990-2008. Assuming the net benefits per project are comparable for ESCO projects that are not included in the LBNL database, this would suggest that the ESCO industry has generated -$23 billion in net direct economic benefits for customers at projects installed between 1990 and 2008. We found that nearly 85% of all public and institutional projects met or exceeded the guaranteed level of savings. We estimated that a typical ESCO project generated $1.5 dollars of direct benefits for every dollar of customer investment. There is empirical evidence confirming that the industry is responding to customer demand by installing more comprehensive and complex measures—including onsite generation and measures to address deferred maintenance—but this evolution has significant implications for customer project economics, especially at K-12 schools. We found that the median simple payback time has increased from 1.9 to 3.2 years in private sector projects since the early-to-mid 1990s and from 5.2 to 10.5 years in public sector projects for the same time period.

  6. USDA Forest Service Gen. Tech. Rep. PSW-GTR-181. 2002. 71 Modeling the Delivery of Large Wood to

    E-Print Network [OSTI]

    USDA Forest Service Gen. Tech. Rep. PSW-GTR-181. 2002. 71 Modeling the Delivery of Large Wood forest structure and predict the delivery of wood to over 55 stream kilometers in a 28-square kilometer = 0.45). The model predicted that 83 percent of wood delivered to streams originated within 20 meters

  7. Abstract This research investigates the requirements for proactive service delivery for heavy industrial equipment

    E-Print Network [OSTI]

    Hsu, Cheng

    Abstract ­ This research investigates the requirements for proactive service delivery for heavy agreements in the field. The observer-participant method was used to develop and test the model with manufacturers of gas turbines, jet engines, and locomotives. The reference model organizes the requirements

  8. Large

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousand CubicResourcelogo and mastheadLakeLanguage of a fly provesLarge

  9. Cost of Service and Rate Design Issues Affecting Industrial Customers in Retail Rate Proceedings 

    E-Print Network [OSTI]

    Stover, C. N. Jr.

    1986-01-01

    stream_source_info ESL-IE-86-06-21.pdf.txt stream_content_type text/plain stream_size 27248 Content-Encoding ISO-8859-1 stream_name ESL-IE-86-06-21.pdf.txt Content-Type text/plain; charset=ISO-8859-1 COST OF SERVICE.... They include: (1) the determination of revenue requirements for the utility, (2) the allocation of revenue requirements to individual customer classes, and (3) the allocation of revenue requirements to individual customers within a class. If energy costs...

  10. Aiding the Detection of Fake Accounts in Large Scale Social Online Services Michael Sirivianos

    E-Print Network [OSTI]

    Yang, Xiaowei

    Rank designated as most likely to be fake, actually warranted suspension. On the other hand, with Tuenti's current The surge in popularity of online social network- ing (OSN) services such as Facebook, Twitter, Digg, Linked or compromised Facebook accounts were on sale during February 2010 [7]. Fake (Sybil) OSN accounts can be used

  11. Analysis of Energy Use in Building Services of the Industrial Sector in California: A Literature Review and a Preliminary Characterization

    E-Print Network [OSTI]

    Akbari, H.

    2008-01-01

    Organic Industrial Agricultural Plastics and Synthetics Drugs Soaps, detergents, toilet paper Paints,

  12. Current and future industrial energy service characterizations. Volume III. Energy data on 15 selected states' manufacturing subsector

    SciTech Connect (OSTI)

    Krawiec, F.; Thomas, T.; Jackson, F.; Limaye, D.R.; Isser, S.; Karnofsky, K.; Davis, T.D.

    1980-11-01

    An examination is made of the current and future energy demands, and uses, and cost to characterize typical applications and resulting services in the US and industrial sectors of 15 selected states. Volume III presents tables containing data on selected states' manufacturing subsector energy consumption, functional uses, and cost in 1974 and 1976. Alabama, California, Illinois, Indiana, Louisiana, Michigan, Missouri, New Jersey, New York, Ohio, Oregon, Pennsylvania, Texas, West Virginia, and Wisconsin were chosen as having the greatest potential for replacing conventional fuel with solar energy. Basic data on the quantities, cost, and types of fuel and electric energy purchased by industr for heat and power were obtained from the 1974 and 1976 Annual Survey of Manufacturers. The specific indutrial energy servic cracteristics developed for each selected state include. 1974 and 1976 manufacturing subsector fuels and electricity consumption by 2-, 3-, and 4-digit SIC and primary fuel (quantity and relative share); 1974 and 1976 manufacturing subsector fuel consumption by 2-, 3-, and 4-digit SIC and primary fuel (quantity and relative share); 1974 and 1976 manufacturing subsector average cost of purchsed fuels and electricity per million Btu by 2-, 3-, and 4-digit SIC and primary fuel (in 1976 dollars); 1974 and 1976 manufacturing subsector fuels and electric energy intensity by 2-, 3-, and 4-digit SIC and primary fuel (in 1976 dollars); manufacturing subsector average annual growth rates of (1) fuels and electricity consumption, (2) fuels and electric energy intensity, and (3) average cost of purchased fuels and electricity (1974 to 1976). Data are compiled on purchased fuels, distillate fuel oil, residual ful oil, coal, coal, and breeze, and natural gas. (MCW)

  13. Industry Economist

    Broader source: Energy.gov [DOE]

    A successful candidate in this position will report to the Manager of Load Forecasting and Analysis of the Customer Services Organization. He/she serves as an industry economist engaged in load...

  14. A Reconfigurable Fabric for Accelerating Large-Scale Datacenter Services Andrew Putnam Adrian M. Caulfield Eric S. Chung Derek Chiou1

    E-Print Network [OSTI]

    Hauck, Scott

    A Reconfigurable Fabric for Accelerating Large-Scale Datacenter Services Andrew Putnam Adrian M Microsoft Abstract Datacenter workloads demand high computational capabili- ties, flexibility, power limitations, has severe implications for datacenter operators, who have traditionally relied on consistent

  15. Modelling Large Pathways: A Hybrid Agent-Based Discrete Event Simulation Tool for Emergency Medical Services Improvement

    E-Print Network [OSTI]

    Oakley, Jeremy

    -Based Ambulance Service model on Geographical Information System. 3. To develop a Discrete Event Simulation model services. The incorporation of geographical information systems (GIS) can provide precise data Services Improvement Anastasia Anagnostou and Simon Taylor School of Information Systems, Computing

  16. Evolution of the U.S. Energy Service Company Industry: Market Size and Project Performance from 1990-2008

    E-Print Network [OSTI]

    Goldman, Charles A.

    2013-01-01

    Energy Efficiency and Renewable Energy Energy Information Administration energy service company energy savings performance contract heating, ventilation, air conditioning

  17. Energy Intensity Indicators: Industrial Source Energy Consumption

    Office of Energy Efficiency and Renewable Energy (EERE)

    The industrial sector comprises manufacturing and other nonmanufacturing industries not included in transportation or services. Manufacturing includes 18 industry sectors, generally defined at the...

  18. Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDidDevelopment Top Scientific Impact SinceService and Repair

  19. Evolution of the U.S. Energy Service Company Industry: Market Size and Project Performance from 1990-2008

    E-Print Network [OSTI]

    Goldman, Charles A.

    2013-01-01

    Service Companies operations and maintenance (DOE Office of)payback times, and operation and maintenance (O&M) savings.construction, operation and maintenance of savings, ability

  20. Owner-Drivers in the Tro-Tro Industry: A Look at Jitney Service Provision in Accra, Ghana

    E-Print Network [OSTI]

    Clayborne, Dontraneil Donte

    2012-01-01

    Department of Geography and Resource Development, Universityrooted in geography and natural resources or were structuralResources/Presentations/UrbanTransp ortServices-Accra.pdf. __________. Geography,

  1. Perspectives on the satellite services industry : analysis of challenges and opportunities in the market, policy and regulatory environments

    E-Print Network [OSTI]

    Torres-Padilla, Juan Pablo

    2005-01-01

    This thesis focuses on Space Communications and combines engineering, economics, market, and policy analyses to identify challenges and opportunities in the industry that are beyond the scope of any one isolated discipline. ...

  2. 36 IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, VOL. 35, NO. 1, JANUARY/FEBRUARY 1999 Multilevel Converters for Large Electric Drives

    E-Print Network [OSTI]

    Tolbert, Leon M.

    . Multilevel converters: 1) can generate near- sinusoidal voltages with only fundamental frequency switching; 2 Converters for Large Electric Drives Leon M. Tolbert, Senior Member, IEEE, Fang Zheng Peng, Senior Member multilevel con- verters as an application for high-power and/or high-voltage electric motor drives

  3. The University of Texas at Austin Enhancing Large Software Purchases Office of the Chief Information Officer Written By: Information Technology Services

    E-Print Network [OSTI]

    Patzek, Tadeusz W.

    The University of Texas at Austin Enhancing Large Software Purchases Office of the Chief for the implementation of UTS 140 at The University of Texas at Austin. Information Technology Services (ITS) strongly benefit not only the university, but all UT System components and other public agencies in Texas. #12

  4. A Case Study on In-situ Rejuvenation of Degraded Insulation on Industrial Piping in Hot Service 

    E-Print Network [OSTI]

    Williams, J.

    2015-01-01

    Orleans, LA. June 2-4, 2015 -2- Presentation Overview • The problem – The physics of wet insulation • The solution – The physics of flexible aerogel blanket material • An example – A case study • Summary and conclusions ESL-IE-15-06-35 Proceedings... of the Thrity-Seventh Industrial Energy Technology Conference New Orleans, LA. June 2-4, 2015 -3- • It usually starts with damaged jacketing, which leads to… • Water ingress, which leads to… • Excessive heat loss /gain… – Water-absorbent insulation materials...

  5. Whitacre College of Engineering Industrial Engineering Department

    E-Print Network [OSTI]

    Gelfond, Michael

    Whitacre College of Engineering Industrial Engineering Department Department Chair and Professor of Industrial Engineering. The Industrial Engineering Department at Texas Tech University has a distinguished industrial engineering education and provide appropriate service to the department, university

  6. Proposal for the award of an industrial services contract for site surveillance and guarding operations during the dismantling of LEP and the LHC installation phase

    E-Print Network [OSTI]

    2000-01-01

    This document concerns the award of an Industrial Services contract for site surveillance and guarding operations during the dismantling of LEP and the LHC installation phase. A call for tenders (IT-2860/ST) was sent on 15 May 2000 to 13 firms in four Member States. By the closing date, CERN had received four tenders from three firms and one consortium in two Member States. The Finance Committee is invited to agree to the negotiation of a contract with the firm SECURITAS (DE), the lowest bidder, for site surveillance and guarding operations during the dismantling of LEP and the LHC installation phase one, ending 30 September 2002, for a total amount of 4 787 434 Swiss francs, not subject to revision.

  7. The Role of Demand Response in Default Service Pricing

    SciTech Connect (OSTI)

    Barbose, Galen; Goldman, Charles; Neenan, Bernie

    2006-04-15

    In designing default service for competitive retail markets, demand response has been an afterthought at best. But that may be changing, as states that initiated customer choice in the past five to seven years reach an important juncture in retail market design and consider an RTP-type default service for large commercial and industrial customers. The authors describe the experience to date with RTP as a default service, focusing on its role as an instrument for cultivating price-responsive demand. (author)

  8. Industrial Permit

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industrial Permit Industrial Permit The Industrial Permit authorizes the Laboratory to discharge point-source effluents under the National Pollutant Discharge Elimination System....

  9. U.S. Department of Agriculture Forest Service | Southern Region

    E-Print Network [OSTI]

    Service (USFS) · National Park Service (NPS) · US Army Corps of Engineers (USACE) · Conservation Service process. · Private stakeholders · Industry stakeholders · Municipal stakeholders Identify priority areas

  10. Biomedical | Chemical & Biomolecular | Civil & Environmental | Electrical & Computer | Industrial | Mechanical | Petroleum Careers in Industrial Engineering

    E-Print Network [OSTI]

    Glowinski, Roland

    | Mechanical | Petroleum Careers in Industrial Engineering Manufacturing, service and retail industries hire a significant number of industrial engineers. Specific industries include automobile manufacturers, electronics to the US Bureau of Labor Statistics, the 2012 average annual wage for industrial engineers is $82

  11. Utility and Industrial Partnerships 

    E-Print Network [OSTI]

    Sashihara, T. F.

    1989-01-01

    In the past decade, many external forces have shocked both utilities and their large industrial customers into seeking more effective ways of coping and surviving. One such way is to develop mutually beneficial partnerships optimizing the use...

  12. Energy use and CO2 emissions of China’s industrial sector from a global perspective

    SciTech Connect (OSTI)

    Zhou, Sheng; Kyle, G. Page; Yu, Sha; Clarke, Leon E.; Eom, Jiyong; Luckow, Patrick W.; Chaturvedi, Vaibhav; Zhang, Xiliang; Edmonds, James A.

    2013-07-10

    The industrial sector has accounted for more than 50% of China’s final energy consumption in the past 30 years. Understanding the future emissions and emissions mitigation opportunities depends on proper characterization of the present-day industrial energy use, as well as industrial demand drivers and technological opportunities in the future. Traditionally, however, integrated assessment research has handled the industrial sector of China in a highly aggregate form. In this study, we develop a technologically detailed, service-oriented representation of 11 industrial subsectors in China, and analyze a suite of scenarios of future industrial demand growth. We find that, due to anticipated saturation of China’s per-capita demands of basic industrial goods, industrial energy demand and CO2 emissions approach a plateau between 2030 and 2040, then decrease gradually. Still, without emissions mitigation policies, the industrial sector remains heavily reliant on coal, and therefore emissions-intensive. With carbon prices, we observe some degree of industrial sector electrification, deployment of CCS at large industrial point sources of CO2 emissions at low carbon prices, an increase in the share of CHP systems at industrial facilities. These technological responses amount to reductions of industrial emissions (including indirect emission from electricity) are of 24% in 2050 and 66% in 2095.

  13. Regional Service Plan South Plains Region 

    E-Print Network [OSTI]

    South Plains Association of Governments

    2010-10-27

    as follows: Adult Day Activity and Health Center Lubbock Bethphage Mission South Lubbock Farwell Convalescent Center Farwell Goodwill Industries of Lubbock Lubbock Hockley County Senior Citizens? Center Levelland Special....3% +1,638,202 16.0% 15.4% 9.9% In FY2005, Citibus carried a total of 3,779,325 passengers; due in large part to high gasoline prices, FY2006 ridership increased in all services with the exception of the Texas Tech University system. The ridership...

  14. Industrial Fuel Flexibility Workshop

    SciTech Connect (OSTI)

    none,

    2006-09-01

    On September 28, 2006, in Washington, DC, ITP and Booz Allen Hamilton conducted a fuel flexibility workshop with attendance from various stakeholder groups. Workshop participants included representatives from the petrochemical, refining, food and beverage, steel and metals, pulp and paper, cement and glass manufacturing industries; as well as representatives from industrial boiler manufacturers, technology providers, energy and waste service providers, the federal government and national laboratories, and developers and financiers.

  15. Industrial Relations

    E-Print Network [OSTI]

    Ulman, Lloyd

    1987-01-01

    S. Tannenbaum. Madison: Industrial 1955. The Rise of the N ai a Working Paper 8733 INDUSTRIAL RELATIONS L l o y d UlmanEconomic Theory and Doctrine INDUSTRIAL RELATIONS Two great

  16. Industrial Engineering Industrial Advisory Board

    E-Print Network [OSTI]

    Gelfond, Michael

    Industrial Engineering Industrial Advisory Board (IAB) #12;PURPOSE: The Texas Tech University - Industrial Engineering Industrial Ad- visory Board (IAB) is an association of professionals with a com- mon goal - promoting and developing the Texas Tech Department of Industrial Engineering and its students

  17. The Potential for Increased Atmospheric CO2 Emissions and Accelerated Consumption of Deep Geologic CO2 Storage Resources Resulting from the Large-Scale Deployment of a CCS-Enabled Unconventional Fossil Fuels Industry in the U.S.

    SciTech Connect (OSTI)

    Dooley, James J.; Dahowski, Robert T.; Davidson, Casie L.

    2009-11-02

    Desires to enhance the energy security of the United States have spurred significant interest in the development of abundant domestic heavy hydrocarbon resources including oil shale and coal to produce unconventional liquid fuels to supplement conventional oil supplies. However, the production processes for these unconventional fossil fuels create large quantities of carbon dioxide (CO2) and this remains one of the key arguments against such development. Carbon dioxide capture and storage (CCS) technologies could reduce these emissions and preliminary analysis of regional CO2 storage capacity in locations where such facilities might be sited within the U.S. indicates that there appears to be sufficient storage capacity, primarily in deep saline formations, to accommodate the CO2 from these industries. Nevertheless, even assuming wide-scale availability of cost-effective CO2 capture and geologic storage resources, the emergence of a domestic U.S. oil shale or coal-to-liquids (CTL) industry would be responsible for significant increases in CO2 emissions to the atmosphere. The authors present modeling results of two future hypothetical climate policy scenarios that indicate that the oil shale production facilities required to produce 3MMB/d from the Eocene Green River Formation of the western U.S. using an in situ retorting process would result in net emissions to the atmosphere of between 3000-7000 MtCO2, in addition to storing potentially 900-5000 MtCO2 in regional deep geologic formations via CCS in the period up to 2050. A similarly sized, but geographically more dispersed domestic CTL industry could result in 4000-5000 MtCO2 emitted to the atmosphere in addition to potentially 21,000-22,000 MtCO2 stored in regional deep geologic formations over the same period. While this analysis shows that there is likely adequate CO2 storage capacity in the regions where these technologies are likely to deploy, the reliance by these industries on large-scale CCS could result in an accelerated rate of utilization of the nation’s CO2 storage resource, leaving less high-quality storage capacity for other carbon-producing industries including electric power generation.

  18. Impact of Industrial Electric Rate Structure on Load Management - A Utility Viewpoint 

    E-Print Network [OSTI]

    Richardson, J. A.

    1984-01-01

    A few years ago our response to an inquiry regarding availability of electric service for a large industrial load was something like: 'Let us put this into our production model to determine whether we will have adequate generating capacity to commit...

  19. Uranium industry annual 1996

    SciTech Connect (OSTI)

    1997-04-01

    The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs.

  20. AUTOMOTIVE INDUSTRY ANALYSIS Submitted by Team A

    E-Print Network [OSTI]

    AUTOMOTIVE INDUSTRY ANALYSIS Submitted by Team A Donald Bradley Morgan Bruns Adam Fleming Jay Ling on the automotive industry, specifically, large-scale manufacturers of automobiles. The automotive industry of the automotive industry. This is followed by an analysis of the industry's structural characteristics using

  1. SymposiumandIndustrialAffiliatesProgramLightinAction Industrial Affiliates Program

    E-Print Network [OSTI]

    Van Stryland, Eric

    SymposiumandIndustrialAffiliatesProgramLightinAction #12;Industrial Affiliates Program Friday, 8 Session I Abstract: Recently Additive Manufacturing (AM) has been hailed as the "third industrial revolution" by Economist magazine [April -2012]. Precision of the product manufactured by AM largely depends

  2. Industrial Assessment Center Awards: Recognizing Excellence in...

    Energy Savers [EERE]

    the deployment of their global commercial and industrial energy-efficiency services in Europe. He has been very active in training, software tool development and assessment...

  3. Industrial Rates and Demand-Side Management Programs 

    E-Print Network [OSTI]

    Kasprowicz, L. M.; House, R.

    1993-01-01

    The industrial sector in Texas is large and energy intensive. Industrial sales constitute a major portion of total sales for several utilities in Texas. Industrial demand-side management (DSM) can be used by utilities to provide industrial customers...

  4. Energy Technical Assistance: Industrial Processes Program 

    E-Print Network [OSTI]

    McClure, J. D.

    1980-01-01

    The Energy Technical Assistance Division of Texas Engineering Extension Service (TEEX) has implemented an energy conservation program to assist small industry in using energy more efficiently. This full time service, an outgrowth of the Texas A...

  5. Large Customers (DR Sellers)

    SciTech Connect (OSTI)

    Kiliccot, Sila

    2011-10-25

    State of the large customers for demand response integration of solar and wind into electric grid; openADR; CAISO; DR as a pseudo generation; commercial and industrial DR strategies; California regulations

  6. Semantic Web Service Architecture --Evolving Web Service Standards toward the Semantic Web

    E-Print Network [OSTI]

    Staab, Steffen

    community the adoption of their schemes into industry (quasi-)standards for Web services is far from trivialCoverpage Semantic Web Service Architecture -- Evolving Web Service Standards toward the Semantic services has been recognized and widely accepted by industry and academic research. However, the two worlds

  7. Network Structures in Industrial Pricing: The Effect of Emergent Roles in Tokyo Supplier-Chain Hierarchies

    E-Print Network [OSTI]

    Nakano, Tsutomu; White, Douglas R.

    2007-01-01

    Scale Network of a Tokyo Industrial District: Small-World,Sabel. 1984. The Second Industrial Divide: Possibilities forthe large-scale regional industrial cluster of Tokyo (Nakano

  8. OTHER INDUSTRIES

    Office of Energy Efficiency and Renewable Energy (EERE)

    AMO funded research results in novel technologies in diverse industries beyond the most energy intensive ones within the U.S. Manufacturing sector. These technologies offer quantifiable energy...

  9. Review of U.S. ESCO industry market trends: An empirical analysis of project data

    SciTech Connect (OSTI)

    Goldman, Charles A.; Hopper, Nicole C.; Osborn, Julie G.; Singer, Terry E.

    2003-03-01

    This article summarizes a comprehensive empirical analysis of U.S. Energy Service Company (ESCO) industry trends and performance. We employ two parallel analytical approaches: a comprehensive survey of firms to estimate total industry size and a database of {approx}1500 ESCO projects, from which we report target markets and typical project characteristics, energy savings and customer economics. We estimate that industry investment for energy-efficiency related services reached US $2 billion in 2000 following a decade of strong growth. ESCO activity is concentrated in states with high economic activity and strong policy support. Typical projects save 150-200 MJ/m2/year and are cost-effective with median benefit/cost ratios of 1.6 and 2.1 for institutional and private sector projects. The median simple payback time is 7 years among institutional customers; 3 years is typical in the private sector. Reliance on DSM incentives has decreased since 1995. Preliminary evidence suggests that state enabling policies have boosted the industry in medium-sized states. ESCOs have proven resilient in the face of restructuring and will probably shift toward selling ''energy solutions,'' with energy efficiency part of a package. We conclude that a private sector energy-efficiency services industry that targets large commercial and industrial customers is viable and self-sustaining with appropriate policy support both financial and non-financial.

  10. Energy Savings in Industrial Buildings 

    E-Print Network [OSTI]

    Zhou, A.; Tutterow, V.; Harris, J.

    2009-01-01

    The industrial sector accounts for more than one-third of total energy use in the United States and emits 28.7 percent of the country’s greenhouse gases. Energy use in the industrial sector is largely for steam and process heating systems...

  11. Why industry demand-side management programs should be self-directed

    SciTech Connect (OSTI)

    Pritchett, T.; Moody, L. ); Brubaker, M. )

    1993-11-01

    U.S. industry believes in DSM. But it does not believe in the way DSM is being implemented, with its emphasis on mandatory utility surcharge/rebate programs. Self-directed industrial DSM programs would be better for industry - and for utilities as well. Industrial demand-side management, as it is currently practiced, relies heavily on command-and-control-style programs. The authors believe that all parties would benefit if utilities and state public service commissions encouraged the implementation of [open quotes]self-directed[close quotes] industrial DSM programs as an alternative to these mandatory surcharge/rebate-type programs. Here the authors outline industrial experience with existing demand-side management programs, and offer alternative approaches for DSM in large manufacturing facilities. Self-directed industrial programs have numerous advantages over mandatory utility-funded and sponsored DSM programs. Self-directed programs allow an industrial facility to use its own funds to meet its own specific goals, whether they are set on the basis of demand reduction, energy use reduction, spending levels for DSM and environmental activities, or some combination of these or other readily measurable criteria. This flexibility fosters a higher level of cost effectiveness, a more focused and effective approach for optimizing energy usage, larger emission reductions per dollar of expenditure, and more competitive industrial electric rates.

  12. California Employment Growth and Office, Industrial, and Retail Markets, 1990

    E-Print Network [OSTI]

    Kroll, Cynthia; Tamura, Dina

    1990-01-01

    Office, Industrial, and Retail Markets, 1990 HE Californiastate's major office and retail markets. Services employmentstate's major office and retail markets." Like manufacturing

  13. Attracting "Green Industry": An Economic Development Approach for the City of Los Angeles

    E-Print Network [OSTI]

    Laurie Kaye

    2006-01-01

    green industry through the development of business parks.industries will fuel demand for green goods and service providers who may also locate within the business park.parks, have been demonstrated over the past two decades. The environmental industry

  14. Commoditization of the third party logistics industry

    E-Print Network [OSTI]

    Manatayev, Yerlan Yergalievich, 1980-

    2004-01-01

    Third party logistics companies in the US emerged in the 1980s and have been providing valuable service for companies willing to outsource logistics. Since then the industry has been growing substantially both in terms ...

  15. Identifying Opportunities for Industrial Energy Conservation 

    E-Print Network [OSTI]

    Hoffman, A. R.

    1981-01-01

    The Energy Productivity Center of the Mellon Institute is engaged in a 2-year study to identify opportunities for improved U.S. industrial energy productivity. A distinguishing feature is the focus on energy services provided when fuels are consumed...

  16. Industrial Waste Heat Recovery Using Heat Pipes 

    E-Print Network [OSTI]

    Ruch, M. A.

    1981-01-01

    For almost a decade now, heat pipes with secondary finned surfaces have been utilized in counter flow heat exchangers to recover sensible energy from industrial exhaust gases. Over 3,000 such heat exchangers are now in service, recovering...

  17. Efficient Bayesian sampling inspection for industrial processes

    E-Print Network [OSTI]

    Little, John

    Efficient Bayesian sampling inspection for industrial processes based on transformed spatio of complex industrial systems subject to degradation effects, such as corrosion, is important for safety, inspection, Bayesian, minima. 1 #12;1 Introduction Many large industrial systems including pipes, vessels

  18. Check Heat Transfer Services; Industrial Technologies Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the result of: * Low air:fuel ratios * Improper fuel preparation * Malfunctioning burners * Oxidation of heat transfer surfaces in high temperature applications * Corrosive...

  19. MFR PAPER 1065 The food service industry

    E-Print Network [OSTI]

    .,upported bJ naltonal ad\\ertl\\lng to gain entn intl) the re- tatl market \\l oreo\\t.:r. there are pre,- e\\aluated the producl.~ SURVEY RESULTS The fO"~1\\\\lng 1\\ an anal},i ... of the ...une} re"'pon,e, \\\\hlloh highlight

  20. Magnetech Industrial Services | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OFAMERICA'SHeavyAgency (IRENA) JumpLiterature Review HomeM-7MHKMaglev

  1. Identification and definition of unbundled electric generation and transmission services

    SciTech Connect (OSTI)

    Kirby, B.; Hirst, E.; Vancoevering, J.

    1995-03-01

    State and federal regulators, private and public utilities, large and small customers, power brokers and marketers, and others are engaged in major debates about the future structure of the electric industry. Although the outcomes are far from certain, it seems clear that customers will have much greater choices about the electric services they purchase and from whom they buy these services. This report examines the ``ancillary`` services that are today buried within the typical vertically integrated utility. These ancillary services support and make possible the provision of the basic services of generating capacity, energy supply, and power delivery. These ancillary services include: Management of generating units; reserve generating capacity to follow variations in customer loads, to provide capacity and energy when generating units or transmission lines suddenly fall, to maintain electric-system stability, and to provide local-area security; transmission-system monitoring and control; replacement of real power and energy losses; reactive-power management and voltage regulation; transmission reserves; repair and maintenance of the transmission network; metering, billing, and communications; and assurance of appropriate levels of power quality. Our focus in this report, the first output from a larger Oak Ridge National Laboratory project, is on identification and definition of these services. Later work in this project will examine more closely the costs and pricing options for each service.

  2. University Services Management Services

    E-Print Network [OSTI]

    into a consolidated data-center and server support team that lowered support costs and reduced or eliminated is that the University be known as much for its service and business innovation as for its high quality research innovative services to assist the units we serve to achieve their goals in a manner consistent with the world

  3. Service Science: Design for Scaling and Transformation

    E-Print Network [OSTI]

    Hsu, Cheng

    -led revolution which is not just post-Industrial Revolution, but also poising Knowledge Economy for furtherService Science: Design for Scaling and Transformation Cheng K. Hsu Professor of Industrial? Is a service-led revolution reality or gimmick? Each question and answer becomes a chapter of the book, which

  4. An Energy Services Initiative 

    E-Print Network [OSTI]

    Beasley, R. C.; Tipton, J. K.; Ehmer, R. C.

    1996-01-01

    The parent company of a large electric utility has launched a new unregulated subsidiary that provides a portfolio of value-added, beyond-the-meter energy services. These services are designed to meet the specific needs of customers and to better...

  5. Student Services Student Services

    E-Print Network [OSTI]

    /Pacific American awareness and education. Resources include: · Academic support programs · Connections with community · Educational and cultural programs/resources · Student organization support · Student leadership in collaboration that maximizes the use of resources and services across the Division, across campus

  6. MIT and Automotive Industries MIT Industry Brief

    E-Print Network [OSTI]

    Herr, Hugh

    MIT and Automotive Industries MIT Industry Brief MIT's Industrial Liaison Program (ILP) can bring@ilp.mit.edu, or visit http://ilp.mit.edu. MIT and Automotive Industries The Massachusetts Institute of Technology (MIT) is a leading center of research and education on topics important to the automotive industry and its suppliers

  7. Industry @ ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDid you notHeat Pumps Heat Pumpsfacility doe logoInIndustry @ ALS

  8. Industrial Permit

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy,ImpactScientific andIndividualEvent Sign InIndustrial

  9. Industrial Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy,ImpactScientific andIndividualEvent SignIndustrial Users -

  10. Industry Economists

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNatural GasEIA lowerslong4,Guide toHighHowIndustry

  11. Deregulation-restructuring: Evidence for individual industries

    SciTech Connect (OSTI)

    Costello, K.W.; Graniere, R.J.

    1997-05-01

    Several studies have measured the effects of regulation on a particular industry. These studies range widely in sophistication, from simple observation (comparison) of pre-transformation and post-transformation actual industry performance to econometric analysis that attempt to separate the effects of deregulation from other factors in explaining changes in an industry`s performance. The major problem with observation studies is that they are unable to measure the effect of one particular event, such as deregulation, on an industry`s performance. For example, at the same time that the United Kingdom privatized its electric power industry, it also radically restructured the industry to encourage competition and instituted a price-cap mechanism to regulate the prices of transmission, distribution, and bundled retail services. Subsequent to these changes in 1991, real prices for most UK electricity customers have fallen. It is not certain however, which of these factors was most important or even contributed to the decline in price. In any event, one must be cautious in interpreting the results of studies that attempt to measure the effect of deregulation per se for a specific industry. This report highlights major outcomes for five industries undergoing deregulation or major regulatory and restructuring reforms. These include the natural gas, transportation, UK electric power, financial, and telecommunications industries. Particular attention was given to the historical development of events in the telecommunications industry.

  12. Product and Service Directory 2004 Issue

    SciTech Connect (OSTI)

    Agnihotri, N.K.

    2003-12-01

    This annual November-December issue of the Nuclear Plant Journal serves as directory of information resources on products and services related to the nuclear power industry. The directory consists of over 3,000 products and services submitted by over 300 suppliers worldwide during October and November 2003. The issue is divided into 4 main areas: Products and Services, Corporate Capabilities, and Suppliers.

  13. Introduction Actual Industrial Problems

    E-Print Network [OSTI]

    Nigam, Nilima

    Introduction Actual Industrial Problems What's needed? Is there really interesting mathematics in Industry? Can mathematicians contribute to society, and do we want to...? Nilima Nigam Department Mathematics in Industry #12;Introduction Actual Industrial Problems What's needed? Some controversial

  14. Mechanical & Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Mechanical & Industrial Engineering 1 Welcome MIE Industrial Advisory Board October 15, 2010 #12;Mechanical & Industrial Engineering 2 MIE Dorothy Adams Undergraduate/Graduate Secretary David Schmidt Associate Professor & Graduate Program Director #12;Mechanical & Industrial Engineering 3 MIE James Rinderle

  15. Waste Heat-to-Power in Small Scale Industry Using Scroll Expander...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to recover waste heat that is exhausted in various manufacturing industries, including food processing. A large portion of unrecovered industrial waste heat is considered to be...

  16. INDUSTRY TRENDS AND PRACTICES The banking industry has become increasingly more complex in

    E-Print Network [OSTI]

    Kühn, Reimer

    and settlement, (6) agency services, (7) asset management, and (8) retail brokerage. The factors loadings and k273 INDUSTRY TRENDS AND PRACTICES The banking industry has become increasingly more complex views presented in this paper are those of the authors and do not necessarily represent models

  17. Industrial Approaches to Reducing Energy Costs in a Restructuring Electric Industry 

    E-Print Network [OSTI]

    Lowe, E. T.

    1995-01-01

    . Although many electricity providers will offer their services in a restructure U.S. electricity market, it is not clear which pow r producers industrial customers wil1 buy from. James Rouse, associate director of energy policy for Praxair, Inc., thinks... the Seventeenth Industrial Energy Technology Conference, Houston, TX, April 5-6, 1995 choices we will have will force [utilities 'J rates down" (1). Electric Industry Restructuring in the United Kingdom The open access system for electricity being implemented...

  18. Engineering Industrial & Systems

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Industrial Engineering Department of Industrial & Systems Engineering Leslie Monplaisir, Ph powerful tool sets used in industry today. -Brent Gillett, BSIE 2007 Advanced Planning Engineer at BMW I is available at: http://ise.wayne.edu/bs-industrial/index What is Industrial Engineering? The industrial

  19. Industrial Engineering (IE) is concerned with the design, analysis and implementation of any production or service system with the goal of improving its quality and productivity. The system could be a manufacturing plant, a transportation or a distributio

    E-Print Network [OSTI]

    Bustamante, Fabián E.

    and Analysis IEMS 385: Introduction to Health Systems Management RESEARCH AREAS Financial Engineering Healthcare Engineering Humanitarian Logistics Social and Organizational Networks Optimization Learn More 5, Engineers for a Sustainable World, Design for America, Formula SAE, Institute of Industrial Engineers

  20. INDUSTRIAL ENGINEERING Industrial engineering is concerned

    E-Print Network [OSTI]

    INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. Industrial engineers design and run the factories and systems

  1. INDUSTRIAL ENGINEERING Industrial engineering is concerned

    E-Print Network [OSTI]

    INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. The focus of industrial engineering is on process improvement

  2. Industry Profile

    Broader source: Energy.gov [DOE]

    Combined heat and power (CHP)—sometimes referred to as cogeneration—involves the sequential process of producing and utilizing electricity and thermal energy from a single fuel. CHP is widely recognized to save energy and costs, while reducing carbon dioxide (CO2) and other pollutants. CHP is a realistic, near-term option for large energy efficiency improvements and significant CO2 reductions.

  3. Selling green power in California: Product, industry, and market trends

    SciTech Connect (OSTI)

    Wiser, R.H.; Pickle, S.J.

    1998-05-01

    As one of the first US stages to open its doors to retail electric competition, California offers an important opportunity to assess the effectiveness of green power marketing as a mechanism for supporting renewable energy. This report is an interim assessment of key green power product, industry, and market trends in California. The report identifies and analyzes: the potential size of the green power market in California; the companies participating in the green power market; the green power products being offered and their prices; the impact of the green market on renewable generators and the environment; and the influence of several public policies and non-governmental programs on the market for green power. Data used in this paper have been collected, in large part, from surveys and interviews with green power marketers that took place between December 1997 and April 1998. There remain legitimate concerns over the viability of green power marketing to support significant quantities of renewable energy and provide large environmental gains, and it is far too early to assess the overall strength of customer demand for renewable energy. A critical finding of this report is that, because of the high cost of acquiring and servicing residential customers and the low utility default service price, green power marketing affords new energy service providers one of the only viable entrees to California`s residential marketplace.

  4. Composition of Engineering Web Services with Distributed Data Flows and Computations

    E-Print Network [OSTI]

    Stanford University

    1 Composition of Engineering Web Services with Distributed Data Flows and Computations David Liu1 when integrating large engineering software services. Keywords Engineering web services; service, the computing environment is evolving toward an interconnected web of autonomous services, both inside

  5. Exposing strategic assets to create new competencies: The case of technological acquisition in the waste management industry in Europe and North America

    E-Print Network [OSTI]

    Delmas, MA

    1999-01-01

    1991), Hazardous Waste Management Services and AssociatedPollution Control and Waste Management Industry Directory.Acquisition in the Waste Management Industry in Europe and

  6. Demand Side Dispatching, Part 2: An Industrial Application 

    E-Print Network [OSTI]

    Nath, R.; Cerget, D. A.; Henderson, E. T.

    1993-01-01

    As part of their Demand Side Management programs, electric utility companies often offer Time of Use (TOU) or other incentive rates to large industrial clients. Such rates offer potential money saving opportunities to industrial clients...

  7. Meeting State Carbon Emission Requirements through Industrial Energy Efficiency: The Southern California Gas Company’s Industrial End User Program

    SciTech Connect (OSTI)

    2010-06-25

    This case study describes the Southern California Gas Company’s Industrial End User program that helps large industrial customers increase energy efficiency and reduce energy use and GHG emissions.

  8. Meeting State Carbon Emission Requirements through Industrial Energy Efficiency: The Southern California Gas Company’s Industrial End User Program

    Broader source: Energy.gov [DOE]

    This case study describes the Southern California Gas Company’s Industrial End User program, which helps large industrial customers increase energy efficiency and reduce energy use and greenhouse gas emissions.

  9. Energy Efficiency Services Sector: Workforce Size and Expectations for Growth

    E-Print Network [OSTI]

    Goldman, Charles

    2010-01-01

    of Labor Statistics. Energy Efficiency Services Sector:of Energy Engineers 2009a. “Energy Independence and MarketTrends: AEE Survey of the Energy Industry 2009. ” http://

  10. The changing structure of the electric power industry: Selected issues, 1998

    SciTech Connect (OSTI)

    NONE

    1998-07-01

    More than 3,000 electric utilities in the United States provide electricity to sustain the Nation`s economic growth and promote the well-being of its inhabitants. At the end of 1996, the net generating capability of the electric power industry stood at more than 776,000 megawatts. Sales to ultimate consumers in 1996 exceeded 3.1 trillion kilowatthours at a total cost of more than $210 billion. In addition, the industry added over 9 million new customers during the period from 1990 through 1996. The above statistics provide an indication of the size of the electric power industry. Propelled by events of the recent past, the industry is currently in the midst of changing from a vertically integrated and regulated monopoly to a functionally unbundled industry with a competitive market for power generation. Advances in power generation technology, perceived inefficiencies in the industry, large variations in regional electricity prices, and the trend to competitive markets in other regulated industries have all contributed to the transition. Industry changes brought on by this movement are ongoing, and the industry will remain in a transitional state for the next few years or more. During the transition, many issues are being examined, evaluated, and debated. This report focuses on three of them: how wholesale and retail prices have changed since 1990; the power and ability of independent system operators (ISOs) to provide transmission services on a nondiscriminatory basis; and how issues that affect consumer choice, including stranded costs and the determination of retail prices, may be handled either by the US Congress or by State legislatures.

  11. Indigenous Services Services for Students

    E-Print Network [OSTI]

    Sinnamon, Gordon J.

    STUDENT SERVICES Indigenous Services Services for Students with Disabilities Learning Skills Distance Studies Continuing Studies Student Success CentreLEARNING SERVICES TEACH ING& DEVELOPM E NTCENTRE collaborative and student- focused efforts make a difference. John Doerksen Vice-Provost (Academic Programs

  12. Engineering Service Products: The Case of Mass-Customizing Service Agreements for Heavy Equipment

    E-Print Network [OSTI]

    Hsu, Cheng

    Technology and Management, 2005. 1 #12;ABSTRACT Service agreements are one-of-a-kind, and commit the service pronounced in the Information Technology (IT) industry and the IT-based non-manufacturing service sector they need. We submit that the mass customization model of manufacturing can help solve the problem; however

  13. TRACK Internet Service 3.1 Introduction

    E-Print Network [OSTI]

    Froude, Lizzie

    Chapter 3 TRACK Internet Service 3.1 Introduction In chapter 1 the idea of a TRACK Internet Service single computer may be infeasible. An Internet Service has been developed to address these issues of data storage and computer CPU. The Internet Service has been used to help with the large amount of data

  14. Effective Transfer of Industrial Energy Conservation Technologies 

    E-Print Network [OSTI]

    Clement, M.; Vallario, R. W.

    1983-01-01

    Voluntary participation in industrial energy conservation programs resulted in savings of approximately 1 million barrels of oil equivalent per day in the U.S. during 1981. These energy savings accrued largely from the ...

  15. Industrial ecology Prosperity Game{trademark}

    SciTech Connect (OSTI)

    Beck, D.; Boyack, K.; Berman, M.

    1998-03-01

    Industrial ecology (IE) is an emerging scientific field that views industrial activities and the environment as an interactive whole. The IE approach simultaneously optimizes activities with respect to cost, performance, and environmental impact. Industrial Ecology provides a dynamic systems-based framework that enables management of human activity on a sustainable basis by: minimizing energy and materials usage; insuring acceptable quality of life for people; minimizing the ecological impact of human activity to levels that natural systems can sustain; and maintaining the economic viability of systems for industry, trade and commerce. Industrial ecology applies systems science to industrial systems, defining the system boundary to incorporate the natural world. Its overall goal is to optimize industrial activities within the constraints imposed by ecological viability, globally and locally. In this context, Industrial systems applies not just to private sector manufacturing and services but also to government operations, including provision of infrastructure. Sandia conducted its seventeenth Prosperity Game{trademark} on May 23--25, 1997, at the Hyatt Dulles Hotel in Herndon, Virginia. The primary sponsors of the event were Sandia National Laboratories and Los Alamos National Laboratory, who were interested in using the format of a Prosperity Game to address some of the issues surrounding Industrial Ecology. Honorary game sponsors were: The National Science Foundation; the Committee on Environmental Improvement, American Chemical Society; the Industrial and Engineering Chemistry Division, American Chemical Society; the US EPA--The Smart Growth Network, Office of Policy Development; and the US DOE-Center of Excellence for Sustainable Development.

  16. Standards Development and Deployment of a Comprehensive, Integrated, Open-standard Monitoring and Equipment Control Networking Protocol Infrastructure for Effective Facility Energy Management of a Large-scale Industrial Site in Alberta, Canada 

    E-Print Network [OSTI]

    Bernstein, R.

    2014-01-01

    Integration (FMSI) Responsibilities • Building Automation System Panel Integration • Design, Maintain, and Supply BMS Panels • Building Management System • User interface • Common dashboard look and feel • Database management and maintenance • BMS software... Suncor Building Management System Standards Development and Deployment of a Comprehensive, Integrated, Open-standard Monitoring and Equipment Control Networking Protocol Infrastructure for Effective Facility Energy Management of a Large...

  17. Identifying Water Savings in Industrial Operations 

    E-Print Network [OSTI]

    Theising, T.

    2015-01-01

    Solutions, L.L.C. Identifying Water Savings in Industrial Operations IETC June 4, 2015 Tom Theising, C.E.M., C.D.S.M. (979) 709-6389 tom.theising@yahoo.com ESL-IE-15-06-23a Proceedings of the Thrity-Seventh Industrial Energy Technology Conference New... Orleans, LA. June 2-4, 2015 SES Sustainable Energy Solutions, L.L.C. Energy Optimization Services: • Energy Efficiency Evaluation • Energy Management Program Development • Energy Maintenance Best Practices Energy Reliability Services: • Identify solutions...

  18. Mechanical, Industrial & Manufacturing

    E-Print Network [OSTI]

    Balasubramanian, Ravi

    Mechanical, Industrial & Manufacturing Engineering (MIME) COLLEGE OF ENGINEERING FY2013 Oregon graduate degrees (MS, MEng, PhD) in mechanical engineering, industrial engineering, and materials science. We offer bachelor's degrees in mechanical, industrial, manufacturing, and energy systems engineering

  19. Chemicals Industry Vision

    SciTech Connect (OSTI)

    none,

    1996-12-01

    Chemical industry leaders articulated a long-term vision for the industry, its markets, and its technology in the groundbreaking 1996 document Technology Vision 2020 - The U.S. Chemical Industry. (PDF 310 KB).

  20. Industrial and Systems engineering

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Industrial and Systems engineering COLLEGE of ENGINEERING DepartmentofIndustrialandSystemsEngineering EDGE Engineering Entrepreneur Certificate Program is a great addition to an industrial and systems to expert clinical recommendations. engineering.wayne.edu/isefaculty Industrial and systems engineering

  1. Electric Utility Industry Update

    Broader source: Energy.gov [DOE]

    Presentation—given at the April 2012 Federal Utility Partnership Working Group (FUPWG) meeting—covers significant electric industry trends and industry priorities with federal customers.

  2. Uranium industry annual 1997

    SciTech Connect (OSTI)

    NONE

    1998-04-01

    This report provides statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing.

  3. Industry Analysis February 2013

    E-Print Network [OSTI]

    Fletcher, Robin

    -Industries · Biodiesel ­ Biofuel ­ Alternate fuels ­ Green fuels ­ Renewable fuels/energy ­ Green energy ­ Green) · Business Source Complete - Company, market, industry news and articles · CBCA and Canadian Newsstand

  4. Chemical Industry Corrosion Management

    SciTech Connect (OSTI)

    2003-02-01

    Improved Corrosion Management Could Provide Significant Cost and Energy Savings for the Chemical Industry. In the chemical industry, corrosion is often responsible for significant shutdown and maintenance costs.

  5. The state of the energy service company today

    SciTech Connect (OSTI)

    Mozzo, M.A. Jr.

    1998-10-01

    Energy service companies have been around for several years. Every year, experts predict their demise. The traditional energy service company (ESCo), whose work utilizes utility rebates, will probably be long gone as rebates disappear. The new energy service company will arise in this industry. This new company will be one that can provide a vast menu of services to their customers. These services can include, but are not necessarily limited to, the following: (1) corporate energy management services, (2) natural gas transportation services, (3) electrical deregulation services, (4) energy engineering services, (5) economics and forecasting, and (6) project financing. The new energy service company must have the engineering, financial, and managerial resources and skills to provide these services. It must also have the ability to recognize the needs of a changing industry and adapt to these changes in order to survive and ultimately provide a benefit to society.

  6. Utilizing Industrial Engineers to Implement "Lean Enterprise" at Company A

    E-Print Network [OSTI]

    Stein, Jean D'Ann

    2012-12-14

    in the implementation of continuous improvement and lean thinking. This skillset has recently allowed IEs to work outside their normal realm of manufacturing, and focus on areas more closely related to service organizations. At Company A, Industrial Engineers...

  7. CAREER SERVICES University of Pennsylvania

    E-Print Network [OSTI]

    Plotkin, Joshua B.

    , Deloitte, Deutsche Bank, Diamond Management & Technology Consultants, DreamWorks Animation, Google Inc industries in which graduates accepted positions continue to be consulting, manufacturing (a 4% decrease), technology (a 2% increase) and financial services. The overall average salary of the employed respondents

  8. Mechanical & Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Mechanical & Industrial Engineering 1 Welcome MIE Industrial Advisory Board May 5th, 2011 #12;Mechanical & Industrial Engineering 2 IAB 2010-2011 · David K. Anderson ­ Alden Research Laboratory, Inc went on for three weeks Mechanical & Industrial Engineering 6 #12;Reza Shahbazian Yassar Mechanical

  9. INDUSTRIAL ENGINEERING GRADUATE PROGRAMS

    E-Print Network [OSTI]

    Gelfond, Michael

    INDUSTRIAL ENGINEERING GRADUATE PROGRAMS The Master of Science in Industrial Engineering (M Systems and Engineering (M.S.M.S.E.), the Doctor of Philosophy in Industrial Engineering, and the Doctor of Philosophy in Systems and Engineering Management programs prepare competent industrial engineers

  10. Industry Analysis October 2010

    E-Print Network [OSTI]

    Abolmaesumi, Purang

    Industry and Company research ­ they build on each other #12;Industry Studies Standard & Poor's Net of competitors Standard & Poor's NetAdvantage - See 'Industry Surveys' under the "Quick Links" #12;Where Common technologies are there industry standards, platforms manufacturing processes, outsourcing? #12

  11. MINING VENTILATION CONTROL: A NEW INDUSTRIAL CASE FOR WIRELESS AUTOMATION

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    MINING VENTILATION CONTROL: A NEW INDUSTRIAL CASE FOR WIRELESS AUTOMATION E. Witrant1, A. D- scribe a new industrial case on wireless automation, for a large scale system with high environmental- provements. Indeed, one of the first objectives of mod- ern mining industry is to fulfill ecological

  12. SmartOpt: An Industrial Strength Framework for Logic Synthesis

    E-Print Network [OSTI]

    Mishchenko, Alan

    SmartOpt: An Industrial Strength Framework for Logic Synthesis Stephen Jang, Dennis Wu, Mark Jarvin are not representative of modern industrial FPGAs. This paper presents a framework (SmartOpt) for mapping complex FPGA the LUT count and performance of large industrial circuits described in HDL. Xilinx Synthesis Technology

  13. IndustrialEngineering361 BreakthroughsinQuality

    E-Print Network [OSTI]

    Vardeman, Stephen B.

    1 ......... IndustrialEngineering361 SixSigma BreakthroughsinQuality Trent Lewis Kim Martin Matt, is total business focus on servicing customers. With Six sigma as the enabler, we intend to meet that standard." - GE 1999 Annual Report Six Sigma So, what is six sigma? The Greek letter Sigma, , is used

  14. Designing a service science discipline with discipline

    E-Print Network [OSTI]

    Glushko, Robert J.

    in what IBM began to call, in late 2004, service science, management and engineering--or simply SSME. 3 in information and computing technol- ogy, industrial engineering, business strategy, eco- nomics, lawDesigning a service science discipline with discipline & R. J. Glushko This paper relates our

  15. Web Service Engineering with DIWE Engin Kirda

    E-Print Network [OSTI]

    Kruegel, Christopher

    Web Service Engineering with DIWE Engin Kirda£ , Clemens Kerer£ , Christopher Kruegel� and Roman 93106, USA chris@cs.ucsb.edu Abstract A Web service is frequently defined as browser-less ac- cess to content on a Web site. The industry's focus to date has been on providing easy-to-use low-level libraries

  16. Large Scale GSHP as Alternative Energy for American Farmers Geothermal...

    Open Energy Info (EERE)

    technologies, and remove the farming business risk associated with fluctuating fuel prices. PI Xu has many years experience in large scale GSHP for commercial and industrial...

  17. Composting Large Animal Carcasses 

    E-Print Network [OSTI]

    Auvermann, Brent W.; Mukhtar, Saqib; Heflin, Kevin

    2006-10-31

    and Kevin Heflin* Livestock producers and large-animal veterinar- ians face a growing problem in rural Texas?what to do with dead animals. Rendering services are getting more expensive and harder to come by, and just leav- ing carcasses to predators... set up a polyethylene tank to hold water and rig it with a float valve so that it stays ?topped off? and ready. If one of your stock tanks stays wet year-round, you can simply lay a suction line with a foot valve into the middle of the pond...

  18. Industry Professional | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View NewTexas: Energy ResourcesOrder at 8, 13 (Vt. WaterInformationPlant ServicesIndustry

  19. Volumetric Hedging in Electricity Procurement Department of Industrial Engineering

    E-Print Network [OSTI]

    Oren, Shmuel S.

    Volumetric Hedging in Electricity Procurement Yumi Oum Department of Industrial Engineering electricity service at regulated prices in restructured electricity markets, face price and quantity risk. We in the electricity industry has put high price risk on market partici- pants, particularly on load serving entities

  20. The Role of Demand Response in Default Service Pricing

    SciTech Connect (OSTI)

    Barbose, Galen; Goldman, Charles; Neenan, Bernie

    2005-11-09

    Dynamic retail pricing, especially real-time pricing (RTP), has been widely heralded as a panacea for providing much-needed demand response in electricity markets. However, in designing default service for competitive retail markets, demand response has been an afterthought, and in some cases not given any weight at all. But that may be changing, as states that initiated customer choice in the past 5-7 years reach an important juncture in retail market design. Most states with retail choice established an initial transitional period during which utilities were required to offer a default or standard offer generation service, often at a capped or otherwise administratively-determined rate. Many retail choice states have reached the end of their transitional period, and several have adopted or are actively considering an RTP-type default service for large commercial and industrial (C&I) customers. In most cases, the primary reason for adopting RTP as the default service has been to advance policy objectives related to the development of competitive retail markets. However, if attention is paid in its design and implementation, default RTP service can also provide a solid foundation for developing price responsive demand, creating an important link between wholesale and retail market transactions. This article, which draws from a lengthier report, describes experience to date with RTP as a default service, focusing on its role as an instrument for cultivating price responsive demand.1 As of summer 2005, default service RTP was in place or approved for future implementation in five U.S. states: New Jersey, Maryland, Pennsylvania, New York, and Illinois. For each of these states, we conducted a detailed review of the regulatory proceedings leading to adoption of default RTP and interviewed regulatory staff and utilities in these states, as well as eight competitive retail suppliers active in these markets.

  1. The Industrial Electrification Program 

    E-Print Network [OSTI]

    Harry, I. L.

    1982-01-01

    EPRI's role as the research organization of the electric power industry, in coordination with potential user industries, is to 1) define the viability of candidate electrification technologies by monitoring the state-of-the-art and continuously...

  2. INDUSTRIAL ENGINEER APPRENTICE OPPORTUNITY

    E-Print Network [OSTI]

    Pohl, Karsten

    INDUSTRIAL ENGINEER APPRENTICE OPPORTUNITY SUMMER 2013 Industrial Engineering COOP Student needed-Fri, for summer 2013. Student must be enrolled in BS Engineering program. (Preferably completed 2-3 yrs

  3. Geothermal Industry Partnership Opportunities

    Broader source: Energy.gov [DOE]

    Here you'll find links to information about partnership opportunities and programs for the geothermal industry.

  4. Industry Analysis January 2012

    E-Print Network [OSTI]

    Abolmaesumi, Purang

    ;8 Conference Board E-Library ­ Canadian industries, economic trends & forecasts ­ national, provincial1 CHEE 906 Industry Analysis January 2012 Constance Adamson, Stauffer Library adamsonc for both Industry and Company research ­ they build on each other #12;3 Where are they? · Library website

  5. Industrial Optimization Compact Course

    E-Print Network [OSTI]

    Kirches, Christian

    Industrial Optimization Compact Course and Challenge Workshop Optimization plays a crucial role in designing and conducting industrial processes. The potential gains range from saving valuable resources over makers from industry and academia to initiate new projects and to foster new structured collaborations

  6. Mechanical & Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Mechanical & Industrial Engineering Mario A. Rotea Professor and Department Head #12;2Mechanical & Industrial Engineering Outline · Undergraduate Degree Programs · Graduate Degree Programs · The Faculty · The Research · Summary #12;3Mechanical & Industrial Engineering Undergraduate Programs ­ BSME & BSIE 0 20 40 60

  7. Photovoltaics industry profile

    SciTech Connect (OSTI)

    1980-10-01

    A description of the status of the US photovoltaics industry is given. Principal end-user industries are identified, domestic and foreign market trends are discussed, and industry-organized and US government-organized trade promotion events are listed. Trade associations and trade journals are listed, and a photovoltaic product manufacturers list is included. (WHK)

  8. INDUSTRIAL RELATIONS 1. Agreements with Industry

    E-Print Network [OSTI]

    of the New Hampshire Industrial Research Center (NHIRC), a cooperative project of the New Hampshire Department of Resources and Economic Development (DRED), the University of New Hampshire (UNH), and Dartmouth

  9. Industrial policy and the Indian electronics industry

    E-Print Network [OSTI]

    Love, Robert (Robert Eric)

    2008-01-01

    Recently, production within India's Electronics sector amounted to a low $12 billion when compared to the global output of $1400 billion. The slow growth in the local industry is often judged to be the result of late ...

  10. Industrial Dojo Program Fosters Industrial Internet Development...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dojo,' Contributes to Open Source to Foster Continued Development of the Industrial Internet Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new...

  11. Industry`s turnaround looks real

    SciTech Connect (OSTI)

    NONE

    1997-08-01

    The paper discusses the industry outlook for North American gas and oil industries. In a robust Canada, land sales are setting records, drilling is up, and output is rising beyond last year`s 21% growth. A perception among US operators that wellhead prices will remain stable is translating to increased spending. The USA, Canada, Mexico, Cuba are evaluated separately, with brief evaluations of Greenland, Guatemala, Belize, and Costa Rico. Data are presented on drilling activities.

  12. INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take of industries including consulting, technology development, software, supply chain manufacturing, engineering

  13. AVLIS industrial access program

    SciTech Connect (OSTI)

    Not Available

    1984-11-15

    This document deals with the procurements planned for the construction of an Atomic Vapor Laser Isotope Separation (AVLIS) production plant. Several large-scale AVLIS facilities have already been built and tested; a full-scale engineering demonstration facility is currently under construction. The experience gained from these projects provides the procurement basis for the production plant construction and operation. In this document, the status of the AVLIS process procurement is presented from two viewpoints. The AVLIS Production Plant Work Breakdown Structure is referenced at the level of the items to be procured. The availability of suppliers for the items at this level is discussed. In addition, the work that will result from the AVLIS enrichment plant project is broken down by general procurement categories (construction, mechanical equipment, etc.) and the current AVLIS suppliers are listed according to these categories. A large number of companies in all categories are currently providing AVLIS equipment for the Full-Scale Demonstration Facility in Livermore, California. These companies form an existing and expanding supplier network for the AVLIS program. Finally, this document examines the relationship between the AVLIS construction project/operational facility and established commercial suppliers. The goal is to utilize existing industrial capability to meet the needs of the project in a competitive procurement situation. As a result, costs and procurement risks are both reduced because the products provided come from within the AVLIS suppliers' experience base. At the same time, suppliers can benefit by the potential to participate in AVLIS technology spin-off markets. 35 figures.

  14. Energy Industry Days- Performance Contracting- Sacramento, CA

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy is hosting several Energy Industry Day events to promote and publicize opportunities for small businesses seeking to meet DOE support requirements. Opportunities will be available for attendees to learn of potential partnerships with prime and subcontracting companies. These Energy Industry Day events would both support the agency's commitment to DOE's "Small Business First Policy" and would provide dedicated sessions that introduce Energy Service Companies (ESCOs) and other prime contract holders with small business.

  15. Argentina`s nuclear industry

    SciTech Connect (OSTI)

    NONE

    1988-02-01

    Argentina occupies a somewhat unusual position among the world`s nuclear nations, in that, while possessing a rather diverse nuclear industry, it has managed to remain largely outside the system of international controls, and is not a signatory of the Nuclear Non-Proliferation Treaty. Argentina currently has two operating reactors, Atucha Unit 1 (335-MWe PHWR) and Embalse (600-MWe CANDU), with another under unit, Atucha Unit 2 (698-MWe PHWR) under construction. Commercial nuclear development is primarily under the control of the Comision Nacional de Energia Atomica (CNEA), which also manages a modest uranium production industry. Fuel cycle facilities, notably an enrichment plant at Pilcaniyeu and a pilot reprocessing plant at Ezeiza, are under development.

  16. IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS 1 The Impact of Temperature on Outdoor

    E-Print Network [OSTI]

    Roedig, Utz

    support new areas such as industrial process automation and control applications. There are a large number sensor networks for industrial process automation and control applications in outdoor May 31, 2009 DRAFTIEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS 1 The Impact of Temperature on Outdoor Industrial WSN

  17. Feasibility Study for Introduction of Alternatives to Fixed Industrial Gauging Devices Utilizing Radioisotopes

    E-Print Network [OSTI]

    for a range of sensors used in process industries. In particular, the paper industry is a large user and performance information on systems, and interviewing personnel involved with the paper industry, sensor are widely used in the paper industry for this purpose · multiple manufacturers of basis weight gauges exist

  18. Closed-Loop Energy Management Control of Large Industrial Facilities 

    E-Print Network [OSTI]

    Childress, R. L.

    2002-01-01

    providing steam to the process. A Sell Advisor calculates Make-Buy decisions based on real-time electrical prices, fuel prices and boiler loads. Condensing turbines are coordinated with closed-loop control to provide the lowest energy cost to the plant. When...

  19. Breakthrough Large-Scale Industrial Project Begins Carbon Capture...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    one of the company's steam methane reformers using a gas-separation technology called "vacuum swing adsorption." After compression and drying, the CO2 purity is greater than 97...

  20. Large-Scale Industrial Carbon Capture, Storage Plant Begins Constructi...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    from biologic fermentation, a significant feature of the project is its "negative carbon footprint," meaning that the sequestration results in a net reduction of...

  1. Energy Department Applauds Nation's First Large-Scale Industrial Carbon

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy A plug-inPPL EnergyPlus,DepartmentFederalJuly 8,toDepartment ofin STEMCapture and

  2. LARGE INDUSTRIAL FACILITIES BY STATE | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nAand DOE Safety Standards Implementation JulyTheKEY07-97# . L I172

  3. Breakthrough Large-Scale Industrial Project Begins Carbon Capture and

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p a l De pEnergy Industrialof Energy 7:30PM PDT

  4. Large-Scale Industrial CCS Projects Selected for Continued Testing |

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergyInterested Parties - WAPA PublicLED ADOPTION REPORTLand and Facility Use Policy2014)

  5. Large-Scale Industrial Carbon Capture, Storage Plant Begins Construction |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousand CubicResourcelogo and mastheadLakeLanguage

  6. Midwest Industrial Energy Efficiency Handbook

    SciTech Connect (OSTI)

    2010-06-25

    This Industrial Technologies Program handbook connects industry with the various energy efficiency resources available in the midwest.

  7. Services for business River House, 5357 High Street, Kingston upon Thames KT11LQ

    E-Print Network [OSTI]

    Matthews, Adrian

    is an independent provider of consultancy services to the oil refining, petrochemical and process industries knowledge by reviewing current practice and implementing new working practices, processes and systems

  8. Towards Identifying Root Causes of Faults in Service-Based Applications

    E-Print Network [OSTI]

    Dustdar, Schahram

    - vided by suppliers, customers or other members of service value networks. In many industries alternative (and incompatible) implementations to co-exist. Additionally, and particularly for younger

  9. Making Industry Part of the Climate Solution

    SciTech Connect (OSTI)

    Lapsa, Melissa Voss; Brown, Dr. Marilyn Ann; Jackson, Roderick K; Cox, Matthew; Cortes, Rodrigo; Deitchman, Benjamin H

    2011-06-01

    Improving the energy efficiency of industry is essential for maintaining the viability of domestic manufacturing, especially in a world economy where production is shifting to low-cost, less regulated developing countries. Numerous studies have shown the potential for significant cost-effective energy-savings in U.S. industries, but the realization of this potential is hindered by regulatory, information, workforce, and financial obstacles. This report evaluates seven federal policy options aimed at improving the energy efficiency of industry, grounded in an understanding of industrial decision-making and the barriers to efficiency improvements. Detailed analysis employs the Georgia Institute of Technology's version of the National Energy Modeling System and spreadsheet calculations, generating a series of benefit/cost metrics spanning private and public costs and energy bill savings, as well as air pollution benefits and the social cost of carbon. Two of the policies would address regulatory hurdles (Output-Based Emissions Standards and a federal Energy Portfolio Standard with Combined Heat and Power); three would help to fill information gaps and workforce training needs (the Superior Energy Performance program, Implementation Support Services, and a Small Firm Energy Management program); and two would tackle financial barriers (Tax Lien Financing and Energy-Efficient Industrial Motor Rebates). The social benefit-cost ratios of these policies appear to be highly favorable based on a range of plausible assumptions. Each of the seven policy options has an appropriate federal role, broad applicability across industries, utilizes readily available technologies, and all are administratively feasible.

  10. CASL - Industry Council

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Member round Robin Discussion and New Action items Organization Senior Leadership Technical Leadership Outreach Board of Directors Industry Council Science Council One-Roof Culture...

  11. CASL - Industry Council Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2014 March 17, 2015 Upcoming Meeting Information Organization Senior Leadership Technical Leadership Outreach Board of Directors Industry Council Science Council One-Roof Culture...

  12. Presentations for Industry

    Broader source: Energy.gov [DOE]

    Learn energy-saving strategies from leading manufacturing companies and energy experts. The presentations are organized below by topic area. In addition, industrial energy managers, utilities, and...

  13. About Industrial Distributed Energy

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office's (AMO's) Industrial Distributed Energy activities build on the success of predecessor DOE programs on distributed energy and combined heat and power (CHP) while...

  14. A Generalized Method for Estimation of Industrial Energy Savings from Capital and Behavioral Programs 

    E-Print Network [OSTI]

    Luneski, R. D.

    2011-01-01

    In 2005, NEEA engaged the food processing industry in the Northwest with a behavior based program called Continuous Energy Improvement (CEI). Industrial energy efficiency programs have historically been limited to large capital projects because...

  15. Transmission Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transmission Services BPA Clarifications on the DSO216 1 Document updated on 2242015 at 3:29:25 PM B O N N E V I L L E P O W E R A D M I N I S T R A T I O N BPA Clarifications on...

  16. Web Service Search: Who, When, What, and How Jianguo Lu1

    E-Print Network [OSTI]

    Yu, Yijun

    - 1 - Web Service Search: Who, When, What, and How Jianguo Lu1 , Yijun Yu2 1 School of Computer.yu@open.ac.uk Abstract: Web service search is an important problem in service oriented architecture that has attracted widespread attention from academia as well as industry. Web service searching can be performed by various

  17. Reliable Web Service Publication and Discovery through Model-Based Testing

    E-Print Network [OSTI]

    Simons, Anthony J. H.

    1 #12;Reliable Web Service Publication and Discovery through Model-Based Testing and Verification-party Web services are becoming key factors to the adoption of service oriented computing in industrial for consumers to build confidence on third-party Web services. In this paper we propose modelling the behaviour

  18. Current Directions in Freight and Logistics Industry

    E-Print Network [OSTI]

    Minnesota, University of

    Current Directions in Freight and Logistics Industry CTS Freight and Logistics Symposium November- the-box #12;Perspective Be sure to look-up from time-to-time #12;Why Discuss Freight and Logistics....Large Part of the Economy Logistics Cost As A Percent of GDP ­ 10% Source: CSCMP State of Logistics 2007 #12

  19. Product and Service directory - 2007 issue

    SciTech Connect (OSTI)

    Agnihotri, Newal

    2006-11-15

    The focus of the November-December issue each year is to provide an up to date product and services directory. The Directory is a source of informaiton on resources for over 3,000 products and services related to the nuclear power industry. The information included was submitted by approximately 300 suppliers worldwide during October-November 2006. The section includes listings of available current products and services with the names of the related supliers. Items listed in the Directory are related to the nuclear power industry only. Therefore the words 'nuclear' or 'nuclear power' have been dropped from the indexing terms that aid in organizing the information presented. Each suppliers listing in the suppliers section includes complete contact information. The Corporate Capabiliites section lists products and services of organizations in one central location.

  20. Product and Service directory - 2005 issue

    SciTech Connect (OSTI)

    Agnihotri, Newal

    2004-11-15

    The focus of the November-December issue each year is to provide an up to date product and services directory. The Directory is a source of informaiton on resources for over 3,000 products and services related to the nuclear power industry. The information included was submitted by approximately 300 suppliers worldwide during October-November 2004. The section includes listings of available current products and services with the names of the related supliers. Items listed in the Directory are related to the nuclear power industry only. Therefore the words 'nuclear' or 'nuclear power' have been dropped from the indexing terms that aid in organizing the information presented. Each suppliers listing in the suppliers section includes complete contact information. The Corporate Capabiliites section lists products and services of organizations in one central location.

  1. Product and Service directory - 2008 issue

    SciTech Connect (OSTI)

    Agnihotri, Newal

    2007-11-15

    The focus of the November-December issue each year is to provide an up to date product and services directory. The Directory is a source of informaiton on resources for over 3,000 products and services related to the nuclear power industry. The information included was submitted by approximately 300 suppliers worldwide during October-November 2007. The section includes listings of available current products and services with the names of the related supliers. Items listed in the Directory are related to the nuclear power industry only. Therefore the words 'nuclear' or 'nuclear power' have been dropped from the indexing terms that aid in organizing the information presented. Each suppliers listing in the suppliers section includes complete contact information. The Corporate Capabiliites section lists products and services of organizations in one central location.

  2. Product and Service directory - 2009 issue

    SciTech Connect (OSTI)

    Agnihotri, Newal

    2008-11-15

    The focus of the November-December issue each year is to provide an up to date product and services directory. The Directory is a source of informaiton on resources for over 3,000 products and services related to the nuclear power industry. The information included was submitted by approximately 300 suppliers worldwide during October-November 2008. The section includes listings of available current products and services with the names of the related supliers. Items listed in the Directory are related to the nuclear power industry only. Therefore the words 'nuclear' or 'nuclear power' have been dropped from the indexing terms that aid in organizing the information presented. Each suppliers listing in the suppliers section includes complete contact information. The Corporate Capabiliites section lists products and services of organizations in one central location.

  3. Product and Service directory - 2006 issue

    SciTech Connect (OSTI)

    Agnihotri, Newal

    2005-11-15

    The focus of the November-December issue each year is to provide an up to date product and services directory. The Directory is a source of informaiton on resources for over 3,000 products and services related to the nuclear power industry. The information included was submitted by approximately 300 suppliers worldwide during October-November 2005. The section includes listings of available current products and services with the names of the related supliers. Items listed in the Directory are related to the nuclear power industry only. Therefore the words 'nuclear' or 'nuclear power' have been dropped from the indexing terms that aid in organizing the information presented. Each suppliers listing in the suppliers section includes complete contact information. The Corporate Capabiliites section lists products and services of organizations in one central location.

  4. NGV industry infrastructure

    SciTech Connect (OSTI)

    Not Available

    1984-12-01

    Current natural gas vehicle (NGV) technology faces a number of problems that must be overcome before vehicles powered by compressed natural gas become accepted in the US. Among these impediments are regulatory uncertainties, codes, standards and the NGV industry infrastructure itself. The marketing/supply infrastructure necessary to support the NGV industry is described.

  5. and Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    45 Mechanical and Industrial Engineering 220 Engineering Lab Degrees: Bachelor of Science in Mechanical Engineering Bachelor of Science in Industrial Engineering Contact: James R. Rinderle, Undergraduate Program Director Office: 207C Engineering Lab Building Phone: (413) 545-2505 Head of Department

  6. Optimizing Process Loads in Industrial Cogeneration Energy Systems 

    E-Print Network [OSTI]

    Ahner, D. J.; Babson, P. E.

    1995-01-01

    W OPTIMIZING PROCESS LOADS IN INDUSTRIAL COGENERAnON ENERGY SYSTEMS DJ. Ahner Manager, Generation Technology Power Tecbnologies, Inc. Schenectady, New York ABSTRACT Optimum dispatcb of energy supply systems can result in large savings... and industrial cogeneration are extended to solving this trigeneration problem where the optimum dispatch of the final load devices (i.e. compressors, fans, pumps, etc.) are an integral part of the total energy system optimization. An example industrial...

  7. Posted 3/2/13 Medline Industries Industrial Engineer

    E-Print Network [OSTI]

    Heller, Barbara

    Posted 3/2/13 Medline Industries ­ Industrial Engineer Medline Industries, Inc. has an immediate opening for an Industrial Engineer for our SPT Division located in Waukegan, IL. We are seeking a hard-working, detail-oriented professional with experience in industrial engineering and lean manufacturing within

  8. INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take · Industrial and Systems Engineering Bachelor of Science 128 units · Industrial and Systems Engineering

  9. INDUSTRIAL & SYSTEMS Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL & SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in todays global marketplace. The Industrial and Systems engineers task is to take limited Industrial and Systems Engineering Bachelor of Science 128 units Industrial and Systems Engineering

  10. INDUSTRIAL&SYSTEMS Industrial and Systems engineers use

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take · Industrial and Systems Engineering Bachelor of Science 128 units · Industrial and Systems Engineering

  11. Marketing Plan for Transmission Planning Services

    E-Print Network [OSTI]

    Tu, Linh

    2006-12-15

    in the non-consulting side of the firm, the following are services provided on the consulting side, still known as Consultation Company: ? Cogeneration services ? Energy facilities planning ? Energy supply management ? Transmission ? Utility formation... Consultation Company?s competitive advantage in the electrical industry is their experience and expertise in the energy market. The company has been working with companies and individuals to help plan, develop and build power plants for over twenty years...

  12. Multi-echelon inventory optimization for an oil services company

    E-Print Network [OSTI]

    Chalapong, Michael

    2011-01-01

    In the oilfield services industry, healthy margins and the criticality of product availability have often over shadowed the need for operational efficiency. Although those factors have not changed, the emergence of stronger ...

  13. Optimization of service parts planning for InFocus

    E-Print Network [OSTI]

    Ni, Yang, M. Eng. Massachusetts Institute of Technology

    2006-01-01

    A common problem faced by many industry companies, including InFocus, is that they are holding excess inventories and incurring unnecessary inventory holding costs yet are not able to achieve their expected customer service ...

  14. UNIVERSITY OF WASHINGTON FACULTY COUNCIL ON UNIVERSITY FACILITIES AND SERVICES

    E-Print Network [OSTI]

    Van Volkenburgh, Elizabeth

    Cheney, Director, Facilities Services, Maintenance and Alterations; Theresa Doherty, Assistant Vice and Industrial Ultrasound, Polar Science and Logistics (Arctic research at the UW APL is "the best in the country

  15. IT Services' Service Level Agreement TECHNICAL SUPPORT

    E-Print Network [OSTI]

    Hamburger, Peter

    IT Services' Service Level Agreement TECHNICAL SUPPORT and HARDWARE/SOFTWARE/NETWORK MAINTENANCE This service level agreement (SLA) describes the computer services provided by Walb Union Operations into the university services card system's database by Union Operations. Walb Union Operations creates university

  16. INFORMATION TECHNOLOGY SERVICES CRM Self Service Training

    E-Print Network [OSTI]

    INFORMATION TECHNOLOGY SERVICES CRM Self Service Training Adding a Case Service Management Technology Services | its.fsu.edu | 2 #12;4. Select a Case Type 5. Select a Category that describes | Information Technology Services | its.fsu.edu | 3 #12;

  17. Thinking outside the TBox multiparty service matchmaking as information retrieval 

    E-Print Network [OSTI]

    Lambert, David James

    2010-01-01

    Service oriented computing is crucial to a large and growing number of computational undertakings. Central to its approach are the open and network-accessible services provided by many different organisations, and which ...

  18. Mining ventilation control: a new industrial case for wireless automation

    E-Print Network [OSTI]

    Johansson, Karl Henrik

    - lated to motor system energy [2] (p.19). Another inter- esting figure is given in [3] whereMining ventilation control: a new industrial case for wireless automation E. Witrant1, A. D, 2008 Abstract This paper describes a new industrial case on wireless automation, for a large scale

  19. Industrial Energy Procurement Contracts 

    E-Print Network [OSTI]

    Thompson, P.; Cooney, K.

    2000-01-01

    suppliers: from the commodity broker to the full range energy services provider. But these contracts are not the same old preordained "service agreements" -where all the real risks were already allocated by the PUC in the terms and conditions section... first decide on which supplier they would prefer to deal with on the basis of customer service, types of customers, ability to meet firm power needs, financial solvency etc. Only after identifying a short list of "qualified suppliers" does the firm...

  20. The Homopolar Generator as a Pulsed Industrial Power Supply 

    E-Print Network [OSTI]

    Weldon, J. M.; Weldon, W. F.

    1979-01-01

    power supply for numerous industrial applications such as large metal cross section pulsed resistance welding, pulsed billet heating for subsequent hot working processes, pulsed heating for localized forging processes, and magnetic metal forming. Each...

  1. Industrial Energy Efficiency Technical Review Guidelines and Best Practices 

    E-Print Network [OSTI]

    Dalziel, N.

    2013-01-01

    . Methodology and Scope of Research: 1. Empirical analysis of reported energy savings at the application, reviewed (contracted), measurement and verification (M&V) and evaluation stages for multiple large or industrial incentive programs. a. Assess impact...

  2. Best Practices: The Engineering Approach For Industrial Boilers 

    E-Print Network [OSTI]

    Blake, N. R.

    2001-01-01

    A plant's boilers represent a large capital investment, as well as a crucial portion of overall plant operations, regardless of the industry our customers are in. It is important to have systems and procedures in place to protect this investment...

  3. Bootstrapping a Sustainable North American PEM Fuel Cell Industry...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (PEM) fuel cell industry may be at a critical juncture. A large-scale market for automotive fuel cells appears to be several years away and in any case will require a...

  4. Industrial and Commercial Heat Pump Applications in the United States 

    E-Print Network [OSTI]

    Niess, R. C.

    1986-01-01

    The energy crisis of 1973 accelerated the development of large-scale heat pumps in the United States. Since that time, the commercial, institutional, and industrial applications of heat pumps for waste heat recovery ...

  5. CASL - Industry Council

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and end-users of CASL products. Members represent owneroperators of nuclear plants, fuel vendors, design engineering companies, engineering service providers, and...

  6. Creating Value Wood Products Industry

    E-Print Network [OSTI]

    1 Creating Value for the Wood Products Industry Creating Value for the Wood Products Industry for the Wood Products Industry The forest industry contributes more than 50 percent of the total value of all assistance to the primary and value-added processing wood products industries in Louisiana. Since its

  7. Industrial process surveillance system

    DOE Patents [OSTI]

    Gross, K.C.; Wegerich, S.W.; Singer, R.M.; Mott, J.E.

    1998-06-09

    A system and method are disclosed for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy. 96 figs.

  8. Industrial Process Surveillance System

    DOE Patents [OSTI]

    Gross, Kenneth C. (Bolingbrook, IL); Wegerich, Stephan W (Glendale Heights, IL); Singer, Ralph M. (Naperville, IL); Mott, Jack E. (Idaho Falls, ID)

    2001-01-30

    A system and method for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy.

  9. Industrial process surveillance system

    DOE Patents [OSTI]

    Gross, Kenneth C. (Bolingbrook, IL); Wegerich, Stephan W. (Glendale Heights, IL); Singer, Ralph M. (Naperville, IL); Mott, Jack E. (Idaho Falls, ID)

    1998-01-01

    A system and method for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy.

  10. Low-income energy policy in a restructuring electricity industry: an assessment of federal options

    SciTech Connect (OSTI)

    Baxter, L.W.

    1997-07-01

    This report identifies both the low-income energy services historically provided in the electricity industry and those services that may be affected by industry restructuring. It identifies policies that are being proposed or could be developed to address low- income electricity services in a restructured industry. It discusses potential federal policy options and identifies key policy and implementation issues that arise when considering these potential federal initiatives. To understand recent policy development at the state level, we reviewed restructuring proposals from eight states and the accompanying testimony and comments filed in restructuring proceedings in these states.

  11. Broadening Industry Governance to Include Nonproliferation

    SciTech Connect (OSTI)

    Hund, Gretchen; Seward, Amy M.

    2008-11-11

    As industry is the first line of defense in detecting and thwarting illicit trade networks, the engagement of the private sector is critical to any government effort to strengthen existing mechanisms to protect goods and services throughout the supply chain. This study builds on previous PNNL work to continue to evaluate means for greater industry engagement to complement and strengthen existing governmental efforts to detect and stem the trade of illicit goods and to protect and secure goods that could be used in making a weapon of mass destruction. Specifically, the study evaluates the concept of Industry Self Regulation, defined as a systematic voluntary program undertaken by an industry or by individual companies to anticipate, implement, supplement, or substitute for regulatory requirements in a given field, generally through the adoption of best practices. Through a series of interviews with companies with a past history of non-compliance, trade associations and NGOs, the authors identify gaps in the existing regulatory infrastructure, drivers for a self regulation approach and the form such an approach might take, as well as obstacles to be overcome. The authors conclude that it is at the intersection of industry, government, and security that—through collaborative means—the effectiveness of the international nonproliferation system—can be most effectively strengthened to the mutual benefit of both government and the private sector. Industry has a critical stake in the success of this regime, and has the potential to act as an integrating force that brings together the existing mechanisms of the global nonproliferation regime: export controls, physical protection, and safeguards. The authors conclude that industry compliance is not enough; rather, nonproliferation must become a central tenant of a company’s corporate culture and be viewed as an integral component of corporate social responsibility (CSR).

  12. Fleet Services Fleet Services Facility

    E-Print Network [OSTI]

    Beex, A. A. "Louis"

    · 287 rental vehicles: economy, hybrid, standard and large cars, mini and 12 passenger and cargo vans, pickup trucks, buses, and police cars. · 2 buses with drivers: 20 passenger and 44passenger · 10

  13. Oklahoma Industrial Energy Management Program 

    E-Print Network [OSTI]

    Turner, W. C.; Webb, R. E.; Phillips, J. M.; Viljoen, T. A.

    1979-01-01

    series of tuition free Industrial Energy Management Conferences (over 20 given to date involving many Oklahoma industries). 2. A free energy newsletter entitled "Energy Channel" mailed to all participating Oklahoma industries. 3. A series of Energy...

  14. Innovative Energy Efficient Industrial Ventilation 

    E-Print Network [OSTI]

    Litomisky, A.

    2005-01-01

    This paper was written to describe an innovative “on-demand” industrial ventilation system for woodworking, metalworking, food processing, pharmaceutical, chemical, and other industries. Having analyzed existing industrial ventilation in 130...

  15. Caraustar Industries Energy Assessment

    SciTech Connect (OSTI)

    2010-06-25

    This plant-wide assessment case study is about commissioned energy assessments by the U.S. Department of Energy Industrial Technologies Program at two of Caraustar's recycled paperboard mills.

  16. Industrial Decision Making 

    E-Print Network [OSTI]

    Elliott, R. N.; McKinney, V.; Shipley, A.

    2008-01-01

    Domestic industrial investment has declined due to unfavorable energy prices, and external markets. Investment behavior has changed over the past few years, and will continue due to high labor costs, tight markets and an unstable U.S. economy...

  17. Industrial Assessment Center

    SciTech Connect (OSTI)

    J. Kelly Kissock; Becky Blust

    2007-04-17

    The University of Dayton (UD) performed energy assessments, trained students and supported USDOE objectives. In particular, the UD Industrial Assessment Center (IAC) performed 96 industrial energy assessment days for mid-sized manufacturers. The average identified and implemented savings on each assessment were $261,080 per year and $54,790 per year. The assessments served as direct training in industrial energy efficiency for 16 UD IAC students. The assessments also served as a mechanism for the UD IAC to understand manufacturing energy use and improve upon the science of manufacturing energy efficiency. Specific research results were published in 16 conference proceedings and journals, disseminated in 22 additional invited lectures, and shared with the industrial energy community through the UD IAC website.

  18. BTU Accounting for Industry 

    E-Print Network [OSTI]

    Redd, R. O.

    1979-01-01

    Today, as never before, American industry needs to identify and control their most critical resources. One of these is energy. In 1973 and again in 1976, the American public and business was confronted with critical energy supply problems. As a...

  19. AI Industrial Engineering 

    E-Print Network [OSTI]

    Unknown

    2011-08-17

    This paper describes the California Energy Commission’s (Commission) energy policies and programs that save energy and money for California’s manufacturing and food processing industries to help retain businesses in-state and reduce greenhouse gases...

  20. Uranium Industry Annual, 1992

    SciTech Connect (OSTI)

    Not Available

    1993-10-28

    The Uranium Industry Annual provides current statistical data on the US uranium industry for the Congress, Federal and State agencies, the uranium and electric utility industries, and the public. The feature article, ``Decommissioning of US Conventional Uranium Production Centers,`` is included. Data on uranium raw materials activities including exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities including domestic uranium purchases, commitments by utilities, procurement arrangements, uranium imports under purchase contracts and exports, deliveries to enrichment suppliers, inventories, secondary market activities, utility market requirements, and uranium for sale by domestic suppliers are presented in Chapter 2.

  1. Load Management for Industry 

    E-Print Network [OSTI]

    Konsevick, W. J., Jr.

    1982-01-01

    categories: Thermal Energy Storage, Communication and Load Control, Interconnection and Operation of Power Systems, and Selective Load Promotions. The endeavors of the utility industry and Ohio Edison Company in three of the four categories are described...

  2. Industrial energy use indices 

    E-Print Network [OSTI]

    Hanegan, Andrew Aaron

    2009-05-15

    Energy use index (EUI) is an important measure of energy use which normalizes energy use by dividing by building area. Energy use indices and associated coefficients of variation are computed for major industry categories ...

  3. Industrial energy use indices 

    E-Print Network [OSTI]

    Hanegan, Andrew Aaron

    2008-10-10

    Energy use index (EUI) is an important measure of energy use which normalizes energy use by dividing by building area. Energy use indices and associated coefficients of variation are computed for major industry categories ...

  4. Animal Industries Building 

    E-Print Network [OSTI]

    Unknown

    2011-08-17

    Plant managers around the world are interested in improving the energy efficiency of their facilities while both growing and modernizing their manufacturing capabilities. Emerging industrial technologies, both at the ...

  5. Animal Industries Building 

    E-Print Network [OSTI]

    Unknown

    2011-08-17

    Industrial steam users recognize the need to reduce system cost in order to remain internationally competitive. Steam systems are a key utility that influence cost significantly, and represent a high value opportunity ...

  6. Steel Industry Profile

    Broader source: Energy.gov [DOE]

    The steel industry is critical to the U.S. economy. Steel is the material of choice for many elements of manufacturing, construction, transportation, and various consumer products. Traditionally...

  7. Demand Response Providing Ancillary Services

    E-Print Network [OSTI]

    1 Demand Response Providing Ancillary Services: A Comparison of Opportunities and Challenges in US to operate (likely price takers) ­ Statistical reliability (property of large aggregations of small resources size based on Mid-Atlantic Reserve Zone #12;Market Rules: Resource Size Min. Size (MW) Aggregation

  8. ISTUM PC: industrial sector technology use model for the IBM-PC

    SciTech Connect (OSTI)

    Roop, J.M.; Kaplan, D.T.

    1984-09-01

    A project to improve and enhance the Industrial Sector Technology Use Model (ISTUM) was originated in the summer of 1983. The project had dix identifiable objectives: update the data base; improve run-time efficiency; revise the reference base case; conduct case studies; provide technical and promotional seminars; and organize a service bureau. This interim report describes which of these objectives have been met and which tasks remain to be completed. The most dramatic achievement has been in the area of run-time efficiency. From a model that required a large proportion of the total resources of a mainframe computer and a great deal of effort to operate, the current version of the model (ISTUM-PC) runs on an IBM Personal Computer. The reorganization required for the model to run on a PC has additional advantages: the modular programs are somewhat easier to understand and the data base is more accessible and easier to use. A simple description of the logic of the model is given in this report. To generate the necessary funds for completion of the model, a multiclient project is proposed. This project will extend the industry coverage to all the industrial sectors, including the construction of process flow models for chemicals and petroleum refining. The project will also calibrate this model to historical data and construct a base case and alternative scenarios. The model will be delivered to clients and training provided. 2 references, 4 figures, 3 tables.

  9. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout /Two0 - 19PortalStatusUserUserHome Contact User Services

  10. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout /Two0 - 19PortalStatusUserUserHome Contact UserServices

  11. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout /Two0 - 19PortalStatusUserUserHome ContactUser Services

  12. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With WIPPfinalUnexpectedofWykoW03: DatatheServices Print The User

  13. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With WIPPfinalUnexpectedofWykoW03: DatatheServices Print The UserUser

  14. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With WIPPfinalUnexpectedofWykoW03: DatatheServices Print The

  15. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With WIPPfinalUnexpectedofWykoW03: DatatheServices Print TheUser

  16. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With WIPPfinalUnexpectedofWykoW03: DatatheServices Print TheUserUser

  17. Service Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home PageMonthly","10/2015"4,"Ames5 Tables July 1996 Energy Information Administration Office of Coal, Nuclear,DecadeYearby the(Dollars1.840YearDecade Year-0Feet)Service

  18. Understanding Sectoral Labor Market Dynamics: An Equilibrium Analysis of the Oil and Gas Field Services

    E-Print Network [OSTI]

    Sadoulet, Elisabeth

    Understanding Sectoral Labor Market Dynamics: An Equilibrium Analysis of the Oil and Gas Field examines the response of employment and wages in the US oil and gas ...eld services industry to changes the dynamic response of wages and employment in the U.S. Oil and Gas Field Services (OGFS) industry to changes

  19. Load Participation in Ancillary Services Workshop

    Broader source: Energy.gov [DOE]

    The Load Participation in Ancillary Services Workshop was held October 25-26, 2011, in Washington, DC. This U.S. Department of Energy workshop was attended by members of the electric power industry, researchers, and policy makers. The results of the workshop informed the Demand Response and Energy Storage Study.

  20. REAL-TIME DATA SERVICES MANAGEMENT TRANSPORTATION

    E-Print Network [OSTI]

    Fisher, Kathleen

    Digital Signage · Automate software delivery · Manage power/heat consumption · Predictive service · Demand response Industrial Equipment1 2 3 4 5 6 CONNECTED MEDICAL DEVICES Medical asset status management ASSET MANAGEMENT Agriculture · Oil flow · Well pressure · Status of pump · Remote Maintenance

  1. Demand Response and Ancillary Services September 2008

    E-Print Network [OSTI]

    Demand Response and Ancillary Services September 2008 #12;© 2008 EnerNOC, Inc. All Rights Reserved programs The purpose of this presentation is to offer insight into the mechanics of demand response and industrial demand response resources across North America in both regulated and restructured markets As of 6

  2. Superior Energy Performance Industrial Facility Best Practice...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industrial Facility Best Practice Scorecard Superior Energy Performance Industrial Facility Best Practice Scorecard Superior Energy Performance logo Industrial facilities seeking...

  3. Microsoft Word - Johnston.IOS.Network Communication as a Service...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    system communication be based on a service-oriented capability. Keywords. Energy Sciences Network (ESnet), networks for large-scale science, network planning, networks...

  4. Next generation solutions for the energy services industry

    E-Print Network [OSTI]

    Kumar, Satish; Kromer, Steve

    2006-01-01

    architecture, engineering, construction, and facilities-management) through- out the project life cycle,

  5. Services-Led Industrialization in India: Assessment and Lessons

    E-Print Network [OSTI]

    Singh, Nirvikar

    2006-01-01

    components (e.g. , software testing in the overall processin addition to the software testing component of software

  6. Next generation solutions for the energy services industry

    E-Print Network [OSTI]

    Kumar, Satish; Kromer, Steve

    2006-01-01

    Figure 4 shows electricity rates and emissions factors (theoffer the cheapest electricity rates vs. lowest emissionscents/kWh) Figure 4. Electricity Rates and Emission Factors

  7. Effective Motivation during Recessions in the IT Client Services Industry

    E-Print Network [OSTI]

    Wootton, Paul

    2005-12-16

    The role of a manager in an organization is to get work done through his or her employees. A good manager must be able to motivate his or her employees in order to perform his or her own job function. Thus, it is important ...

  8. Moorhead Public Service Utility - Commercial and Industrial Energy...

    Broader source: Energy.gov (indexed) [DOE]

    Fans: 25 - 45 Window Film: 0.40square foot Compressed Air: Varies Computer Network Power Management: 15 per PC Occupancy Sensors for Document Stations: 25 Lighting: Varies...

  9. Next generation solutions for the energy services industry

    E-Print Network [OSTI]

    Kumar, Satish; Kromer, Steve

    2006-01-01

    the E-marketplace. Electronic Power Exchange Monitoring,at one of the many “Power Exchanges”, and the interest rate

  10. Developing an energy efficiency service industry in Shanghai

    E-Print Network [OSTI]

    Lin, Jiang; Goldman, Charles; Levine, Mark; Hopper, Nicole

    2004-01-01

    National Laboratory. IPMVP, International Performanceand Verification Protocol (IPMVP), National Association ofstandards, such as the IPMVP, and represents the interests

  11. Financing the growth of energy efficiency service industry in Shanghai

    E-Print Network [OSTI]

    Lin, Jiang; Gilligan, Donald; Zhao, Yinghua

    2005-01-01

    Berkeley, California. IPMVP, International PerformanceFactors The development of the IPMVP In the early 1990s, theVerification Protocol (IPMVP, available at www.ipmvp.org),

  12. Knowledge Transfer Partnerships Williams Industrial Services Ltd & Queen's University Belfast

    E-Print Network [OSTI]

    Paxton, Anthony T.

    of biogas plant Use of QUESTOR laboratories for sample analysis Company Quote "Through the Knowledge reductions in energy footprint while maintaining treatment performance. Key Benefits Results of sludge

  13. Environmental Program Services Industry Day List Of Attendees

    National Nuclear Security Administration (NNSA)

    Inc. Keith Tucker 480-363-4439 5 S.M. Stoller Corp. Geoff Asmus 303-546-4344 6 North Wind R. Jade Siddoway 208-569-2825 7 Golder Associates Nicole DeNovio 425-883-0777 8...

  14. Residential Building Industry Consulting Services | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EIS Report UrlNM-bRenewable Energy RFPsLtdEnergyResidential Building

  15. Moorhead Public Service Utility - Commercial and Industrial Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nAand DOE SafetyofDepartment.EfficiencyDepartmentDepartmentInMoon Choe -

  16. EDF Industrial Power Services (TX), LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePower VenturesInformation9)askDouble Oak,DurraNRELECOsponsible Jump to:EDF

  17. US Energy Service Company Industry: History and Business Models |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCEDInstallers/ContractorsPhotovoltaicsStateofEnergyof Energy ElectrochemicalUSDepartment of

  18. DOE Seeks Industry Participation for Engineering Services to Design Next

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy A plug-in electric vehicle10nominateEnergyThis memoEnergyRegulations

  19. Mechanical and Industrial Engineering Industry Advisory Board University of Massachusetts Amherst

    E-Print Network [OSTI]

    Mountziaris, T. J.

    9/13/2007 Mechanical and Industrial Engineering Industry Advisory Board University of Massachusetts Amherst Department of Mechanical and Industrial Engineering About the Mechanical and Industrial Engineering Industry Advisory Board The purpose of the Mechanical and Industrial Engineering Industry Advisory

  20. INFORMATION TECHNOLOGY SERVICES CRM Self Service Training

    E-Print Network [OSTI]

    INFORMATION TECHNOLOGY SERVICES CRM Self Service Training Editing a Case Service Management showing the case details Florida State University | Information Technology Services | its.fsu.edu | 2 #12 the Notes and Attachments tab. A new window will open Florida State University | Information Technology

  1. WEB servicesWEB services Samuel Tardieu

    E-Print Network [OSTI]

    Tardieu, Samuel

    WEB servicesWEB services Samuel Tardieu École Nationale Supérieure des Télécommunications sam@enst.fr #12;ConceptsConcepts Web services are a new breed of Web application. They are self-contained, self-describing, modular applications that can be published, located, and invoked across the Web. Web services perform

  2. 1 Industrial Electron Accelerators type ILU for Industrial Technologies

    E-Print Network [OSTI]

    1 Industrial Electron Accelerators type ILU for Industrial Technologies The present work describes industrial electron accelerators of the ILU family. Their main parameters, design, principle of action the pulse linear accelerators type ILU are developed and supplied to the industry. The ILU machines

  3. industrial & systems Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 industrial & systems Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take to introduce the philosophy, subject matter, aims, goals, and techniques of industrial and systems engineering

  4. industrial & systems Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 industrial & systems Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take s e n G i n e e r i n G ( i s e ) ISE 105 Introduction to Industrial and Systems Engineering (2, Fa

  5. MIT and Building/Construction & Related Industries MIT Industry Brief

    E-Print Network [OSTI]

    Kastner, Marc A.

    MIT and Building/Construction & Related Industries MIT Industry Brief MIT's Industrial Liaison-617-253-2691, e-mail us at liaison@ilp.mit.edu, or visit http://ilp.mit.edu. MIT and Building and education on topics important to build- ing, construction, and related areas and industries such as

  6. Building America Webinar: Opportunities in Large Data Collection and Analysis

    Broader source: Energy.gov [DOE]

    The webinar focused on specific Building America projects that are looking to gather and analyze large bodies of data on new and existing homes, and will feature opportunities for industry to collaborate with researchers to gather and analyze valuable data.

  7. Wildlife Services 

    E-Print Network [OSTI]

    Texas Wildlife Services

    2007-05-23

    in large numbers may damage property and cause human health problems. ? Protecting crops, timber, rangeland and other natural resources from the damage caused by gophers, prairie dogs, feral hogs, raccoons, rabbits, coyotes, grackles, beavers and other... wildlife. When building dams, beavers may cause flooding of timber and pastureland and the loss of trees and field crops. Feral hogs damage field crops, pastures and riparian habitat by their feeding, trampling and rooting activities. ? Protecting livestock...

  8. Engineering & Technology News | Industrial News Buzz Flexible electronics could help put Arrhythmic hearts back on rhythm

    E-Print Network [OSTI]

    Rogers, John A.

    Engineering & Technology News | Industrial News Buzz Flexible electronics could help put Arrhythmic hearts back on rhythm Home Engineering Store Products & Services Engineering Forum CAD Forum Engineering Design Data Engineering News Engineering Calculators Newsletter Register Advertise Feedback GD&T Training

  9. A real options approach to manage flexible contracts in the telecommunication networking industry

    E-Print Network [OSTI]

    Tay, Ee Learn, 1968-

    2004-01-01

    One of the biggest challenges facing Original Equipment Manufacturers (OEMs) and Electronic Manufacturing Services (EMS) providers in the telecommunication networking industry is to predict the spending patterns of the ...

  10. U. S. Industrial Energy Consumption and Conservation: Past and Future Perspectives 

    E-Print Network [OSTI]

    Ganeriwal, R; Ross, M. H.

    1980-01-01

    This paper examines U.S. industrial energy consumption and conservation potentials by defining the concept of energy service which, in turn, leads to more precise consideration of various aspects of conservation. It is seen that there are a number...

  11. Improving Cooling System Immunity Supply Voltage Sags in Petroleum and Chemical Industries 

    E-Print Network [OSTI]

    Dorr, D. S.

    2000-01-01

    Electrical service faults and voltage discontinuities are of growing concern in process industries where individual sensitive equipment or controls can disrupt the entire plant. In fact, just a minor variation in power for a fraction of a second can...

  12. UAIEE and Industrial Assessment Centers

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    55-62011| Industrial Assessment Centers * Started in 1976 * Currently 26 Centers across the US * Almost...

  13. A Multimedia Workflow-Based Collaborative Engineering Environment for Oil & Gas Industry

    E-Print Network [OSTI]

    Barbosa, Alberto

    A Multimedia Workflow-Based Collaborative Engineering Environment for Oil & Gas Industry Ismael H the control and execution of large and complex industrial projects in oil and gas industry. The environment governmental oil & gas company. The necessity of collaboration is especially acute in the field of computer

  14. Volumetric Hedging in Electricity Procurement Department of Industrial Engineering

    E-Print Network [OSTI]

    Volumetric Hedging in Electricity Procurement Yumi Oum Department of Industrial Engineering electricity service at regulated prices in restructured electricity markets, face price and quantity risk. We address the hedging problem of such a risk averse LSE. Exploiting the correlation between consumption

  15. Want to Learn Simple Industrial Energy Efficiency Tips?

    E-Print Network [OSTI]

    Want to Learn Simple Industrial Energy Efficiency Tips? Attend a free workshop put can reduce energy usage. This program is valuable to all manufacturing segments. Friday, June 23, 2006 8 a.m. ­ 12 noon Xcel Energy's Technical Services Bldg 550 15th St - Denver, CO 80202 Conference

  16. Solar industrial process heat

    SciTech Connect (OSTI)

    Lumsdaine, E.

    1981-04-01

    The aim of the assessment reported is to candidly examine the contribution that solar industrial process heat (SIPH) is realistically able to make in the near and long-term energy futures of the United States. The performance history of government and privately funded SIPH demonstration programs, 15 of which are briefly summarized, and the present status of SIPH technology are discussed. The technical and performance characteristics of solar industrial process heat plants and equipment are reviewed, as well as evaluating how the operating experience of over a dozen SIPH demonstration projects is influencing institutional acceptance and economoc projections. Implications for domestic energy policy and international implications are briefly discussed. (LEW)

  17. Industrial Heat Recovery - 1982 

    E-Print Network [OSTI]

    Csathy, D.

    1982-01-01

    Industrial Research HTFS Re search Programme HTFS/1S/R19, "Dryout and Flow in Horizontal and Horizontal Hairpin Tubes". 6 l\\rnerican Boiler I1anufacturers Assoc iation, "Lexicon, Boiler & Auxiliary Eauinment", 7 G:t=iffith P., book of I:eat senow N... RECOVERY - 1982 by Denis Csathy, Deltak Corn,oration, !1inneapolis, 11N Two years ago I summarized 20 years of ex perience on Industrial Heat Recovery for the Energy-source Technology Conference and Exhibition held in New Orleans, Louisiana. l...

  18. Richard Gerber! NERSC User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMassR&D100Nationalquestionnaires 0serialIndustrialSenior ScienceUser Services

  19. Evaluating Sites for Industrial Cogeneration in Chicago 

    E-Print Network [OSTI]

    Fowler, G. L.; Baugher, A. H.

    1982-01-01

    constant base-load thermal energy re quirements are the core of urban industrial cogen eration systems. Thermal energy demand is the primary consideration, as cogenerators may nego tiate buy-sell arrangements with the electric util ity to match... food products; printing, publishing, and allied products; chemicals; rubber and plas ics; and primary fabricated metals. Approximately 4 percent of the census tracts in Chicago (403 of 867) had at least one large base-load primary thermal user; 15...

  20. Heat Pump Application- An Industrial Case Study 

    E-Print Network [OSTI]

    Shukla, D.; Umoh, R.

    1990-01-01

    stream_source_info ESL-IE-90-06-17.pdf.txt stream_content_type text/plain stream_size 18112 Content-Encoding ISO-8859-1 stream_name ESL-IE-90-06-17.pdf.txt Content-Type text/plain; charset=ISO-8859-1 HEAT PUMP... APPLICATION- AN INDUSTRIAL CASE STUDY Deepak Shukla, Ph.D. Sr. Process Engineer TENSA services, Inc. Houston, Texas ABSTRACT The economics of heat pumping across a distillation column is usually dependent on the amount of additional compressor work...

  1. The Impact of Information Technology in Nigeria's Banking Industry

    E-Print Network [OSTI]

    Oluwatolani, Oluwagbemi; Philip, Achimugu

    2011-01-01

    Today, information technology (IT) has become a key element in economic development and a backbone of knowledge-based economies in terms of operations, quality delivery of services and productivity of services. Therefore, taking advantage of information technologies (IT) is an increasing challenge for developing countries. There is now growing evidence that Knowledge-driven innovation is a decisive factor in the competitiveness of nations, industries, organizations and firms. Organizations like the banking sector have benefited substantially from e-banking, which is one among the IT applications for strengthening the competitiveness. This paper presents the current trend in the application of IT in the banking industries in Nigeria and gives an insight into how quality banking has been enhanced via IT. The paper further reveals that the deployment of IT facilities in the Nigerian Banking industry has brought about fundamental changes in the content and quality of banking business in the country. This analysis...

  2. Automotive Turbocharging: Industrial Requirements and Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Turbocharging: Industrial Requirements and Technology Developments Automotive Turbocharging: Industrial Requirements and Technology Developments Significant improvements in...

  3. Development of A New Class of Fe-3Cr-W(V)Ferritic Steels for Industrial Process Applications

    SciTech Connect (OSTI)

    Sikka, V.J.; Jawad, M.H. (Nooter Corp.)

    2005-06-15

    The project, 'Development of a New Class of Fe-Cr-W(V) Ferritic Steels for Industrial Process Applications', was a Cooperative Research and Development Agreement (CRADA) between Oak Ridge National Laboratory (ORNL) and Nooter Corporation. This project dealt with improving the materials performance and fabrication for the hydrotreating reactor vessels, heat recovery systems, and other components for the petroleum and chemical industries. The petroleum and chemical industries use reactor vessels that can approach the ship weights of approximately 300 tons with vessel wall thicknesses of 3 to 8 in. These vessels are typically fabricated from Fe-Cr-Mo steels with chromium ranging from 1.25 to 12% and molybdenum from 1 to 2%. Steels in this composition have great advantages of high thermal conductivity, low thermal expansion, low cost, and properties obtainable by heat treatment. With all of the advantages of Fe-Cr-Mo steels, several issues are faced in design and fabrication of vessels and related components. These issues include the following: (1) low strength properties of current alloys require thicker sections; (2) increased thickness causes heat-treatment issues related to nonuniformity across the thickness and thus not achieving the optimum properties; (3) fracture toughness (ductile-to-brittle transition ) is a critical safety issue for these vessels, and it is affected in thick sections due to nonuniformity of microstructure; (4) PWHT needed after welding and makes fabrication more time-consuming with increased cost; and (5) PWHT needed after welding also limits any modifications of the large vessels in service. The goal of this project was to reduce the weight of large-pressure vessel components (ranging from 100 to 300 tons) by approximately 25% and reduce fabrication cost and improve in-service modification feasibility through development of Fe-3Cr-W(V) steels with combination of nearly a 50% higher strength, a lower DBTT and a higher upper-shelf energy, ease of heat treating, and a strong potential for not requiring PWHT.

  4. ORGANIZATION CHART UNIVERSITY SERVICES

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    Materials Mgmt Safety & Health Training Industrial Hygiene Medical Surveillance Fire & Life Safety Workers

  5. Ancillary Services Provided from DER

    SciTech Connect (OSTI)

    Campbell, J.B.

    2005-12-21

    Distributed energy resources (DER) are quickly making their way to industry primarily as backup generation. They are effective at starting and then producing full-load power within a few seconds. The distribution system is aging and transmission system development has not kept up with the growth in load and generation. The nation's transmission system is stressed with heavy power flows over long distances, and many areas are experiencing problems in providing the power quality needed to satisfy customers. Thus, a new market for DER is beginning to emerge. DER can alleviate the burden on the distribution system by providing ancillary services while providing a cost adjustment for the DER owner. This report describes 10 types of ancillary services that distributed generation (DG) can provide to the distribution system. Of these 10 services the feasibility, control strategy, effectiveness, and cost benefits are all analyzed as in the context of a future utility-power market. In this market, services will be provided at a local level that will benefit the customer, the distribution utility, and the transmission company.

  6. Industrial Retrofits are Possible 

    E-Print Network [OSTI]

    Stobart, E. W.

    1990-01-01

    industries and our surveys to date have shown savings of 6% in electricity and 11% in natural gas. Over the first two years of the program, individual plants have or are intending to implement more than half of the energy analysis recommendations....

  7. for Industry Manufacturing

    E-Print Network [OSTI]

    helps to reduce risk and accelerate the development and deployment of innovative energy-efficient Energy Research Nation's broadest portfolio of energy generation and efficiency programs ScienceA National Resource for Industry Manufacturing Demonstration Facility #12;As the nation's premier

  8. Industry Partners Panel

    Broader source: Energy.gov [DOE]

    Industry Panel presenters include: Michael G. Andrew, Director - Academic and Technical Programs, Advanced Products and Materials, Johnson Controls Power Solutions Michael A. Fetcenko, Vice President and Managing Director, BASF Battery Materials – Ovonic, BASF Corporation Adam Kahn, Founder and CEO, AKHAN Technologies, Inc. Stephen E. Zimmer, Executive Director, United States Council for Automotive Research (USCAR)

  9. A methdology for baselining the energy use at large campus utility plants for the purpose of measuring energy savings from energy conservation retrofits 

    E-Print Network [OSTI]

    Beasley, Rodney Craig

    1999-01-01

    The development of the energy services industry and the implementation of energy savings retrofits by energy services companies has increased the focus on the performance of energy saving retrofits. Energy savings measurement, though not an exact...

  10. Maintaining a competitive geothermal industry

    SciTech Connect (OSTI)

    Zodiaco, V.P.

    1996-04-10

    I come to this geothermal business with over 30 years of experience in the power generation industry. I have earned my spurs (so to speak) in the electric utility, nuclear power, coal and the gas-fired cogeneration power businesses. I have been employed by Oxbow Power for the past seven years and for the past 18 months I have been based in Reno and responsible for the operation, maintenance and management of Oxbow`s domestic power projects which include three geothermal and two gas-fired facilities. The Oxbow Power Group (consisting principally of Oxbow Power Corporation, Oxbow Geothermal Corporation, Oxbow Power of Beowawe, Oxbow Power International and Oxbow Power Services, Inc.) is based in West Palm Beach, Florida, and has regional offices in Reno, Hong Kong and Manila to support on-line geothermal projects in Nevada, other domestic power projects and a geothermal plant under construction in the Philippines. Oxbow Power employs approximately 30 professionals in the development and management of power projects and over 100 supervisors and technicians in the operation and maintenance of power facilities. Current ownership in independent power projects total 340 MW in the United States and 47 MW under construction in the Philippines. Oxbow is currently negotiating additional projects in several Asian and Central American countries.

  11. Industrial Use of Fish Oils UNITED STATES DEPART MENT OF THE INTERIOR

    E-Print Network [OSTI]

    Industrial Use of Fish Oils UNITED STATES DEPART MENT OF THE INTERIOR FISH AND WILDLIFE SERVICE BUREAU OF COMMERCIAL FISHERIES #12;Industrial Use of Fish Oils UNITED STATES DEPART MENT OF THE INTERIOR 16 IIndustrial Use of Fish Oils INTRODUCTION The world's waters annually produce a tremendous harwst

  12. Initial Placement of BS Chemical Engineers, `00-01 Industry 55.9%

    E-Print Network [OSTI]

    Haile, Sossina M.

    Initial Placement of BS Chemical Engineers, `00-01 Industry 55.9% Other 1.8% Graduate.8% Initial placement of Chemical Engineering Graduates, Academic Year `00-'01, AIChE Career Services Department #12;Breakdown of Industrial Employment for BS Chemical Engineers Chemical 23.3% Fuels 15

  13. BLM and Forest Service Consider Large-Scale Geothermal Leasing...

    Office of Environmental Management (EM)

    Environmental Impact Statement (PEIS) for geothermal leasing in the West, including Alaska. The draft PEIS considers all public lands and national forests with geothermal...

  14. Challenges for Growing Engineering Services within a Large Construction Company

    E-Print Network [OSTI]

    Olivares, R. Omar

    2008-12-19

    . Within KPE the traditional disciplines involved in designing a power plant are present: civil, structural, mechanical, electrical, and instrument & controls. KPE partners with other “builders” within the company to work on design-build for power plants... also indicating their value for the client. 5. Producing a “cost paranoia proposal”, one that focuses exclusively on trying to prove that this solution is the cheapest, no matter what the numbers may look like. The reality is that if you cannot...

  15. Formal Verification of Robot Movements -a Case Study on Home Service Robot SHR100

    E-Print Network [OSTI]

    Formal Verification of Robot Movements - a Case Study on Home Service Robot SHR100 Moonzoo Kim, Kyo of Technology Suwon, South Korea twinclee@samsung.com Abstract-- Home service robots have received much atten- tion from both academia and industry because home service robots have wide range of potential

  16. Diffusion Welding of Alloys for Molten Salt Service - Status Report

    SciTech Connect (OSTI)

    Denis Clark; Ronald Mizia

    2012-05-01

    The present work is concerned with heat exchanger development for molten salt service, including the proposed molten salt reactor (MSR), a homogeneous reactor in which the fuel is dissolved in a circulating fluid of molten salt. It is an outgrowth of recent work done under the Next Generation Nuclear Plant (NGNP) program; what the two reactor systems have in common is an inherently safe nuclear plant with a high outlet temperature that is useful for process heat as well as more conventional generation The NGNP program was tasked with investigating the application of a new generation of nuclear power plants to a variety of energy needs. One baseline reactor design for this program is a high temperature, gas-cooled reactor (HTGR), which provides many options for energy use. These might include the conventional Rankine cycle (steam turbine) generation of electricity, but also other methods: for example, Brayton cycle (gas turbine) electrical generation, and the direct use of the high temperatures characteristic of HTGR output for process heat in the chemical industry. Such process heat is currently generated by burning fossil fuels, and is a major contributor to the carbon footprint of the chemical and petrochemical industries. The HTGR, based on graphite fuel elements, can produce very high output temperatures; ideally, temperatures of 900 C or even greater, which has significant energy advantages. Such temperatures are, of course, at the frontiers of materials limitations, at the upper end of the performance envelope of the metallic materials for which robust construction codes exist, and within the realm of ceramic materials, the fabrication and joining of which, on the scale of large energy systems, are at an earlier stage of development. A considerable amount of work was done in the diffusion welding of materials of interest for HTGR service with alloys such as 617 and 800H. The MSR output temperature is also materials limited, and is projected at about 700 C. (RR E) A different set of alloys, such as Alloy N and 242, are needed to handle molten salts at this temperature. The diffusion welding development work described here builds on techniques developed during the NGNP work, as applied to these alloys. There is also the matter of dissimilar metal welding, since alloys suitable for salt service are generally not suited for service in gaseous oxidizing environments, and vice versa, and welding is required for the Class I boundaries in these systems, as identified in the relevant ASME codes.

  17. Diffusion Welding of Alloys for Molten Salt Service - Status Report

    SciTech Connect (OSTI)

    Denis Clark; Ronald Mizia; Piyush Sabharwall

    2012-09-01

    The present work is concerned with heat exchanger development for molten salt service, including the proposed molten salt reactor (MSR), a homogeneous reactor in which the fuel is dissolved in a circulating fluid of molten salt. It is an outgrowth of recent work done under the Next Generation Nuclear Plant (NGNP) program; what the two reactor systems have in common is an inherently safe nuclear plant with a high outlet temperature that is useful for process heat as well as more conventional generation The NGNP program was tasked with investigating the application of a new generation of nuclear power plants to a variety of energy needs. One baseline reactor design for this program is a high temperature, gas-cooled reactor (HTGR), which provides many options for energy use. These might include the conventional Rankine cycle (steam turbine) generation of electricity, but also other methods: for example, Brayton cycle (gas turbine) electrical generation, and the direct use of the high temperatures characteristic of HTGR output for process heat in the chemical industry. Such process heat is currently generated by burning fossil fuels, and is a major contributor to the carbon footprint of the chemical and petrochemical industries. The HTGR, based on graphite fuel elements, can produce very high output temperatures; ideally, temperatures of 900 °C or even greater, which has significant energy advantages. Such temperatures are, of course, at the frontiers of materials limitations, at the upper end of the performance envelope of the metallic materials for which robust construction codes exist, and within the realm of ceramic materials, the fabrication and joining of which, on the scale of large energy systems, are at an earlier stage of development. A considerable amount of work was done in the diffusion welding of materials of interest for HTGR service with alloys such as 617 and 800H. The MSR output temperature is also materials limited, and is projected at about 700 °C. (RR E) A different set of alloys, such as Alloy N and 242, are needed to handle molten salts at this temperature. The diffusion welding development work described here builds on techniques developed during the NGNP work, as applied to these alloys. There is also the matter of dissimilar metal welding, since alloys suitable for salt service are generally not suited for service in gaseous oxidizing environments, and vice versa, and welding is required for the Class I boundaries in these systems, as identified in the relevant ASME codes.

  18. Policy modeling for industrial energy use

    SciTech Connect (OSTI)

    Worrell, Ernst; Park, Hi-Chun; Lee, Sang-Gon; Jung, Yonghun; Kato, Hiroyuki; Ramesohl, Stephan; Boyd, Gale; Eichhammer, Wolfgang; Nyboer, John; Jaccard, Mark; Nordqvist, Joakim; Boyd, Christopher; Klee, Howard; Anglani, Norma; Biermans, Gijs

    2003-03-01

    The international workshop on Policy Modeling for Industrial Energy Use was jointly organized by EETA (Professional Network for Engineering Economic Technology Analysis) and INEDIS (International Network for Energy Demand Analysis in the Industrial Sector). The workshop has helped to layout the needs and challenges to include policy more explicitly in energy-efficiency modeling. The current state-of-the-art models have a proven track record in forecasting future trends under conditions similar to those faced in the recent past. However, the future of energy policy in a climate-restrained world is likely to demand different and additional services to be provided by energy modelers. In this workshop some of the international models used to make energy consumption forecasts have been discussed as well as innovations to enable the modeling of policy scenarios. This was followed by the discussion of future challenges, new insights in the data needed to determine the inputs into energy model s, and methods to incorporate decision making and policy in the models. Based on the discussion the workshop participants came to the following conclusions and recommendations: Current energy models are already complex, and it is already difficult to collect the model inputs. Hence, new approaches should be transparent and not lead to extremely complex models that try to ''do everything''. The model structure will be determined by the questions that need to be answered. A good understanding of the decision making framework of policy makers and clear communication on the needs are essential to make any future energy modeling effort successful. There is a need to better understand the effects of policy on future energy use, emissions and the economy. To allow the inclusion of policy instruments in models, evaluation of programs and instruments is essential, and need to be included in the policy instrument design. Increased efforts are needed to better understand the effects of innovative (no n-monetary) policy instruments through evaluation and to develop approaches to model both conventional and innovative policies. The explicit modeling of barriers and decision making in the models seems a promising way to enable modeling of conventional and innovative policies. A modular modeling approach is essential to not only provide transparency, but also to use the available resources most effectively and efficiently. Many large models have been developed in the past, but have been abandoned after only brief periods of use. A development path based on modular building blocks needs the establishment of a flexible but uniform modeling framework. The leadership of international agencies and organizations is essential in the establishment of such a framework. A preference is given for ''softlinks'' between different modules and models, to increase transparency and reduce complexity. There is a strong need to improve the efficiency of data collection and interpretation efforts to produce reliable model inputs. The workshop participants support the need for the establishment of an (in-)formal exchanges of information, as well as modeling approaches. The development of an informal network of research institutes and universities to help build a common dataset and exchange ideas on specific areas is proposed. Starting with an exchange of students would be a relative low-cost way to start such collaboration. It would be essential to focus on specific topics. It is also essential to maintain means of regular exchange of ideas between researchers in the different focus points.

  19. Western University Rehabilitation Services

    E-Print Network [OSTI]

    Lennard, William N.

    1 Western University Rehabilitation Services Transitional Accommodation Program Western by Rehabilitation Services and is updated at frequent intervals in order to: 1. confirm progression toward treatment information is held in the strictest confidence within Rehabilitation Services. Only capabilities

  20. Personal Services Agreements Waivers

    E-Print Network [OSTI]

    capital construction and controlled maintenance contracts. Type of Service 1. Construction Consultants limitations. 3. Building and Ground Services: Include floor finishing, roofing maintenance, welding operations. CSM does not have staff qualified to perform these specialized services, or does not have

  1. Essays in the industrial organization of the pharmaceutical industry

    E-Print Network [OSTI]

    Shapiro, Bradley T. (Bradley Thomas)

    2014-01-01

    This dissertation comprises of three chapters, each exploring different issues in the industrial organization of the pharmaceutical industry. In the first chapter, I study the effects of television advertising of antidepressants ...

  2. MIT and the Building/Construction Industries MIT Industry Brief

    E-Print Network [OSTI]

    Herr, Hugh

    /construction and related industries such as: · Building, infrastructure · Materials, energy · Architecture, design · Smart technologies, sensor systems · Housing, urban development/planning, real estate Following are brief structures, materials, industrialized building systems, energy and lighting in buildings, air quality control

  3. Innovative New Industrial Technologies: An Industry/DOE Joint Endeavor 

    E-Print Network [OSTI]

    Gross, T. J.

    1986-01-01

    The Department of Energy’s Office of Industrial Programs supports research and development leading to improved energy efficiency and greater overall productivity in the industrial sector. Its basic strategy is a program of cost-shared R...

  4. Transforming the Oil Industry into the Energy Industry

    E-Print Network [OSTI]

    Sperling, Daniel; Yeh, Sonia

    2009-01-01

    Transforming the Oil Industry into the Energy Industry BYculprit. It consumes half the oil used in the world andconsuming two thirds of the oil and causing about one third

  5. IBM Global Technology Services Server Services

    E-Print Network [OSTI]

    ServerTM, Power SystemsTM, pSeries®, #12;2 PowerVMTM, PowerHATM, System StorageTM disk systems, System p®, System x® and other IBM selected products with the option to purchase as a ServicePac® including: IBM Implementation Services for Power Systems-- AIX V6.1 remote implementation IBM Implementation Services for Power

  6. GENERAL SERVICES ADMINISTRATION PUBLIC BUILDINGS SERVICE

    E-Print Network [OSTI]

    (Wax, cleansers, cloths, etc.) 7. CONTRACT SERVICES (Window washing, waste and snow removal) B. HEATING a share of building support/common areas such as elevator lobbies, building corridors, and floor service areas. Floor service areas typically include restrooms, janitor rooms, telephone closets, electrical

  7. Impact of an Export Subsidy on the Domestic Cotton Industry

    E-Print Network [OSTI]

    Wohlgenant, Michael K.

    1986-01-01

    was implemented to reduce large surpluses. In 1984, the PIK program was discontinued, but participating produc ers were required to reduce their acreage base and devote a portion of the planted acreage to conservation uses (USDA,1984). Trends in market prices... large surpluses and large treasury costs anticipated with the current target price-loan rate program. The following sections examine likely effects of export subsidies for the domestic cotton industry. A MODEL OF THE IMPACT OF AN EXPORT SUBSITY...

  8. Fitness for service applications in LNG plants

    SciTech Connect (OSTI)

    Bagnoli, D.L.; Polk, C.J.; Yin, H.; Gordon, J.R.

    1995-12-31

    Fitness-for-service assessments can provide information regarding operational reliability of equipment. However, to be meaningful, such assessments require an analytical procedure to determine the ability of engineering structures to tolerate the presence of weld flaws. In recent years, there has been a significant interest in this technology by the refining and petrochemical industries for predicting and avoiding fracture in pressurized components. Most applications have covered pressure vessel and piping where carbon and low alloy steels are the traditional materials of construction. More recently, fitness for service questions have developed for equipment with highly ductile materials such as aluminum alloys. In order to handle these questions ductile tearing resistance must be considered and R curve methods are required. In this paper examples are cited where fitness for service assessments were required for an aluminum heat exchanger in LNG service. Suitable R curve data were developed in order to establish flaw tolerance following UT inspections of this equipment.

  9. APPLIED STOCHASTIC MODELS IN BUSINESS AND INDUSTRY Appl. Stochastic Models Bus. Ind., 2006; 22:297311

    E-Print Network [OSTI]

    Shen, Haipeng

    APPLIED STOCHASTIC MODELS IN BUSINESS AND INDUSTRY Appl. Stochastic Models Bus. Ind., 2006; 22 Non-parametric modelling of time-varying customer service times at a bank call centre Haipeng Shen1 are interested in modelling the time-varying pattern of average customer service times at a bank call centre

  10. Business Services | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    products and services that support the lab's overall mission. Managing the lab's vendor process is the Procurement & Services department. The department is dedicated to the...

  11. ORISE: Health physics services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Health physics services Nuclear power plant The Oak Ridge Institute for Science and Education (ORISE) offers comprehensive health physics services in a number of technical areas...

  12. Natural gas industry directory

    SciTech Connect (OSTI)

    1999-11-01

    This directory has information on the following: associations and organizations; exploration and production; gas compression; gas processors; gathering and transmission companies; liquefied natural gas; local distribution companies; marketing firms; regulatory agencies; service companies; suppliers and manufacturers; and regional buyer`s guide.

  13. Coal industry annual 1997

    SciTech Connect (OSTI)

    1998-12-01

    Coal Industry Annual 1997 provides comprehensive information about US coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves. US Coal production for 1997 and previous years is based on the annual survey EIA-7A, Coal Production Report. This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report includes a national total coal consumption for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. 14 figs., 145 tabs.

  14. Electrotechnologies in Process Industries 

    E-Print Network [OSTI]

    Amarnath, K. R.

    1989-01-01

    applications of innovative electrotechnologies in these sectors. APPLICATIONS Electricity is predominantly used in three ways in process industries: 1. Motor Drives 2. Process Heating 3. Electrochemical Processes Motor drives are mainly used in prime..., infrared, and ultraviolet heating have found a variety of applications, and more are under development. ElectrOChemical processes for separation and synthesis (such as Chlor-Alkali production) are significant users of electricity. New processes...

  15. Industrial energy savers

    SciTech Connect (OSTI)

    Not Available

    1986-01-01

    This is a series of technical bulletins developed as a quick reference to various energy-saving technologies. Each bulletin provides information on economics, benefits, and applications. Topics are chiller optimization and energy-efficient chillers, evaporative cooling, economizer cycles, thermal energy storage for cooling systems, boiler room energy conservation, cogeneration, industrial heat pumps, steam trap maintenance, energy-efficient motors, and variable speed drive motors.

  16. Industrial Analytics Corporation

    SciTech Connect (OSTI)

    Industrial Analytics Corporation

    2004-01-30

    The lost foam casting process is sensitive to the properties of the EPS patterns used for the casting operation. In this project Industrial Analytics Corporation (IAC) has developed a new low voltage x-ray instrument for x-ray radiography of very low mass EPS patterns. IAC has also developed a transmitted visible light method for characterizing the properties of EPS patterns. The systems developed are also applicable to other low density materials including graphite foams.

  17. Industrial Technical Assistance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURING OFFICE INDUSTRIAL TECHNICAL ASSISTANCE Supports the deployment of energy efficient

  18. Industrial Equipment Impacts Infrastructure

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergy HeadquartersFuelBConservation StandardsEnergy In2008DepartmentIndustrial

  19. The impact of government policies on industrial evolution : the case of China's automotive industry

    E-Print Network [OSTI]

    Luo, Jianxi

    2006-01-01

    Governmental industrial policies have great influence on industrial performances and development trajectories. The infant industry theory has been the dominating theoretical foundation of the industrial policies in developing ...

  20. Clustering in the biotechnology industry

    E-Print Network [OSTI]

    Schoenberg, Frederic P

    2006-01-01

    the world to attract high-technology industry. The mostare attempts to create high-technology industrial clusters,institutes because high-technology firms frequently spin-off

  1. Shale Play Industry Transportation Challenges,

    E-Print Network [OSTI]

    Minnesota, University of

    Demand and Supply Factors ­Gas and Oil Commodity Pricing ­Finite Demand ­Rapid · It is three related, but yet independent industries: ­Fracture Sand Industry ­Oil ­ High volume commodi-es flows in and out of shale plays · Sand In....Oil

  2. Oklahoma Industrial Energy Management Program 

    E-Print Network [OSTI]

    Estes, C. B.; Turner, W. C.

    1980-01-01

    this, the Oklahoma Department of Energy designed a program to acquaint Oklahoma industry with the potential savings available through energy management and some basic techniques. The program is, entitled "Oklahoma Industrial Energy Management Program...

  3. Industrial Heat Pump Design Options 

    E-Print Network [OSTI]

    Gilbert, J. S.

    1985-01-01

    There are numerous industries that can incorporate heat pumps into their operations to save energy costs and payoff the investment in well under two years. Many of these industries can cut energy costs associated with evaporation by over 75...

  4. Empirical essays in industrial organization

    E-Print Network [OSTI]

    Chiou, Lesley C

    2005-01-01

    In this dissertation, I present three empirical essays that encompass topics in industrial organization. The first essay examines the degree of competition and spatial differentiation in the retail industry by exploiting ...

  5. Texas Industries of the Future 

    E-Print Network [OSTI]

    Ferland, K.

    2002-01-01

    The purpose of the Texas Industries of the Future program is to facilitate the development, demonstration and adoption of advanced technologies and adoption of best practices that reduce industrial energy usage, emissions, and associated costs...

  6. Forest Products Industry Technology Roadmap

    SciTech Connect (OSTI)

    none,

    2010-04-01

    This document describes the forest products industry's research and development priorities. The original technology roadmap published by the industry in 1999 and was most recently updated in April 2010.

  7. CEMI Industrial Efficiency (text version)

    Broader source: Energy.gov [DOE]

    Below is the text version for the Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video.  

  8. China's Nuclear Industry After Fukushima

    E-Print Network [OSTI]

    YUAN, Jingdong

    2013-01-01

    continue to pursue nuclear expansion as part of an energythe rapid expansion of China’s nuclear industry requires a

  9. Design Editorial Industrial Research Contributions

    E-Print Network [OSTI]

    Papalambros, Panos

    Journal of Mechanical Design Editorial Industrial Research Contributions Would authors working in industry be welcome contributors to JMD? The answer is an emphatic "yes, indeed!" but the reality is that authors from industry are a small minority relative to authors from academia. There are some real reasons

  10. Industry/University Cooperative Research

    E-Print Network [OSTI]

    Mease, Kenneth D.

    Industry/University Cooperative Research Center (I/UCRCs) Funded by the National Science Foundation capacity by developing long-term partnerships among industry, academe, and government. Leverage NSF funds with industry to support and train the next generation workforce within a global context. Mission: 1 #12;The I

  11. Public and Institutional Markets for ESCO Services: ComparingPrograms, Practices and Prformance

    SciTech Connect (OSTI)

    Hopper, Nicole; Goldman, Charles; McWilliams, Jennifer; Birr,Dave; Stoughton McMordie, Kate

    2005-03-01

    Throughout the U.S. energy services company (ESCO) industry's history, public and institutional sector customers have provided the greatest opportunities for ESCOs to develop projects. Generally speaking, these facilities are large, possess aging infrastructure, and have limited capital budgets for improvements. The convergence of these factors with strong enabling policy support makes performance contracting an attractive and viable option for these customers. Yet despite these shared characteristics and drivers, there is surprising variety of experience among public/institutional customers and projects. This collaborative study examines the public/institutional markets in detail by comparing the overarching models and project performance in the federal government and the ''MUSH'' markets municipal agencies (state/local government), universities/colleges, K-12 schools,and hospitals that have traditionally played host to much of the ESCO industry's activity. Results are drawn from a database of 1634 completed projects held in partnership by the National Association of Energy Services Companies and Lawrence Berkeley National Laboratory (the NAESCO/LBNL database), including 129 federal Super Energy Savings Performance Contracts (ESPC) provided by the Federal Energy Management Program (FEMP) (Strajnic and Nealon 2003). Project data results are supplemented by interviews with ESCOs.

  12. Controlling NOx emission from industrial sources

    SciTech Connect (OSTI)

    Srivastava, R.K.; Nueffer, W.; Grano, D.; Khan, S.; Staudt, J.E.; Jozewicz, W.

    2005-07-01

    A number of regulatory actions focused on reducing NOx emissions from stationary combustion sources have been taken in the United States in the last decade. These actions include the Acid Rain NOx regulations, the Ozone Transport Commission's NOx Budget Program, and the NOx SIP Call rulemakings. In addition to these regulations, the recent Interstate Air Quality Rulemaking proposal and other bills in the Congress are focusing on additional reductions of NOx. Industrial combustion sources accounted for about 18016 of NOx emissions in the United States in 2000 and constituted the second largest emitting source category within stationary sources, only behind electric utility sources. Based on these data, reduction of NOx emissions from industrial combustion sources is an important consideration in efforts undertaken to address the environmental concerns associated with NOx. This paper discusses primary and secondary NOx control technologies applicable to various major categories of industrial sources. The sources considered in this paper include large boilers, furnaces and fired heaters, combustion turbines, large IC engines, and cement kilns. For each source category considered in this paper, primary NOx controls are discussed first, followed by a discussion of secondary NOx controls.

  13. Power Services, Direct Service Industries letter to the region, May 29, 2009

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass mapSpeedingProgram Guidelines This document w w w.pv - te ch.orgPower PlantRates

  14. Mining Industry Profile | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    utilities, the primary metals industry, non-metallic minerals industry (glass, cement, lime), and the construction industry. Employment Mining operations are often the leading...

  15. Green Industrial Policy: Trade and Theory

    E-Print Network [OSTI]

    Karp, Larry; Stevenson, Megan

    2012-01-01

    Chang, H. -J. (2006): “Industrial policy in East Asia -foreign in- vestment and industrial policy for developing409. Lin, J. (2010): “Industrial policy comes out of the

  16. Industrial Energy Efficiency and Climate Change Mitigation

    E-Print Network [OSTI]

    Worrell, Ernst

    2009-01-01

    Stimulating R&D of industrial energy-efficient technology;Turnover, Retrofit and Industrial Energy Efficiency. Energyprograms perform at improving industrial energy efficiency.

  17. The Industrial Transformation of Subarctic Canada

    E-Print Network [OSTI]

    Mathoor, Vineeth

    2011-01-01

    the pace and impact of industrial transformation in theReview: The Industrial Transformation of Subarctic Canada ByIndia Piper, Liza. The Industrial Transformation of

  18. Electronic waste disassembly with industrial waste heat

    E-Print Network [OSTI]

    2013-01-01

    and for e?ective use of industrial exhaust heat is describedto scale up the process to industrial production levels.Waste Disassembly with Industrial Waste Heat Mengjun

  19. Setting the Standard for Industrial Energy Efficiency

    E-Print Network [OSTI]

    McKane, Aimee; Williams, Robert; Perry, Wayne; Li, Tienan

    2008-01-01

    IEA) 7 July 2006 Industrial motor systems energy efficiency:of energy-efficient equipment in industrial motor systems isin industrial energy efficiency, especially motor, steam,

  20. Industrial Energy Efficiency: Designing Effective State Programs...

    Office of Environmental Management (EM)

    Energy Efficiency: Designing Effective State Programs for the Industrial Sector Industrial Energy Efficiency: Designing Effective State Programs for the Industrial Sector This...

  1. INFORMATIONQUALITYEVALUATIONFORGRID INFORMATION SERVICES

    E-Print Network [OSTI]

    Pallis, George

    INFORMATIONQUALITYEVALUATIONFORGRID INFORMATION SERVICES Wei Xing, Oscar Corcho, Carole Goble@cs.ucy.ac.cy Abstract The quality of the information provided by information services deployed in the EGEE production query by different information services can be different. Developers of these services and of other

  2. Web Services Distributed

    E-Print Network [OSTI]

    Cook, William R.

    1 Web Services versus Distributed Objects William R. Cook, Janel Barfield University of Texas at Austin 2 How many times have you heard... 3 "Web Services suck..." ? 4 "WS are a bad version Objects 10 to 100 times faster than Web Services 7 Test Case Call a remote service that returns an integer

  3. STUDENT HEALTH MEDICAL SERVICES

    E-Print Network [OSTI]

    Huang, Haiying

    Ver 2.0 09/2012 ANNEX H STUDENT HEALTH & MEDICAL SERVICES #12;Ver 2.0 09/2012 H-i APPROVAL & IMPLEMENTATION Annex H Student Health & Medical Services This emergency management plan is hereby approved. ______________________________ ________________________ Robert Blum Date Director of Health Services Marie Bannister Date Director of Mental Health Services

  4. Animal Industries - 10 

    E-Print Network [OSTI]

    Unknown

    2006-06-02

    Concentrated animal feeding operations such as cattle feedlots and dairies produce a large amount of manure, cattle biomass (CB), which may lead to land, water, and air pollution if waste handling systems and storage and ...

  5. Animal Industries - 4 

    E-Print Network [OSTI]

    Unknown

    2006-06-02

    An experimental study on flooding with steam and water in a large diameter vertical tube was conducted. This research has been performed to provide a better prediction of flooding in a pressurized water reactor (PWR) ...

  6. Large displacement spherical joint

    DOE Patents [OSTI]

    Bieg, Lothar F. (Albuquerque, NM); Benavides, Gilbert L. (Albuquerque, NM)

    2002-01-01

    A new class of spherical joints has a very large accessible full cone angle, a property which is beneficial for a wide range of applications. Despite the large cone angles, these joints move freely without singularities.

  7. The Web Services Vision Definition of Web Services

    E-Print Network [OSTI]

    Cheverst, Keith

    1 The Web Services Vision Overview Definition of Web Services Key concepts Difference from traditional web model Context Service-oriented architecture Distributed computing Overview Microsoft .NET vision Web Services Difference from traditional web model Context Service-oriented architecture

  8. Coal Industry Annual 1995

    SciTech Connect (OSTI)

    1996-10-01

    This report presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 21 million short tons for 1995.

  9. Recent developments: Industry briefs

    SciTech Connect (OSTI)

    1990-04-01

    Recent nuclear industry briefs are presented. These briefs include: Soviet Union to build Iran nuclear plant; Dension announces cuts in Elliot Lake production; Soviet environmental study delays Rostov startup; Cogema closes two mines; Namibian sanctions lifted by USA and Canada; US Energy and Kennecott restructors joint venture; Australians reelect Hawke; China to buy Soviet nuclear plant; Olympic Dam`s first sale of concentrates to USA; Uranevz buys one-third of Cogema`s Rabbit Lake operations; East and West Germany forming joint nuclear law; and Nova Scotia extends uranium exploration plan.

  10. Coal industry annual 1996

    SciTech Connect (OSTI)

    1997-11-01

    This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States.This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 24 million short tons for 1996. 14 figs., 145 tabs.

  11. Recent developments: Industry briefs

    SciTech Connect (OSTI)

    NONE

    1990-08-01

    Recent nuclear industry briefs are presented. These briefs include: Japan completes test plant for laser enrichment, Saskatchewan reveals buyer percentages; West German utilities to take over East German Utilities; Mexico studying construction of 20 new nuclear plants; Cogema signs reprocessing contracts for 15 West German reactors; DOE`s FY91 incentive price predicted; West Germany decommissions sale uranium processing plant; Argentina`s Atucha-2 may be closed or sold; West Germany to buy Nukem plant for plutonium storage; and Saskatchewan revises uranium royalty system.

  12. Recent developments: Industry briefs

    SciTech Connect (OSTI)

    NONE

    1990-12-01

    Recent nuclear industry briefs are presented. These briefs include: uranium mine closures; all Ontario new reactor plans halted; B & W and GA form MHTGR fuel joint venture; Namibia seeks uranium sales in Japan; Minatco purchases remainder of Wolly Project; CGE agrees to relinquish control of Framatome; Oregon voter keep Trojan Nuclear Plant open; Soviets invited to Foratom meeting; court overrules NRC in licensing and training issues; Glencar exploration injoint venture with Hungarian mine; Soviet Union and Argentina to cooperate in breeder program; and German loads revive Atucha-2.

  13. Carbon Emissions: Chemicals Industry

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)Decade Year-0ProvedDecade2,948California (MillionThousandChemicals Industry

  14. Carbon Emissions: Food Industry

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)Decade Year-0ProvedDecade2,948California (MillionThousandChemicals IndustryFood

  15. Carbon Emissions: Paper Industry

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)Decade Year-0ProvedDecade2,948California (MillionThousandChemicalsPaper Industry

  16. Systems and Industry Analyses

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With LivermoreSustainable Landmimic keySystemssystems and industry

  17. Industrial Energy Efficiency

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nA Guide toIMPROVEMENT OFBarriers to Industrial Energy Efficiency Report to

  18. OE Requests Comments on Potential Creation of a Reserve of Large...

    Broader source: Energy.gov (indexed) [DOE]

    bulk power system. Large power transformers (LPTs), which are a critical component of the power grid, are a concern because transformer failures can interrupt electricity service...

  19. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsofProgram: Report AppendicesAVideo »Services ServicesServices ServicesServices

  20. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsofProgram: Report AppendicesAVideo »Services ServicesServicesServices Services

  1. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsofProgram: Report AppendicesAVideo »Services ServicesServicesServicesServices

  2. Energy Industry Days- Performance Contracting- San Diego, CA

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy is hosting several Energy Industry Day events to promote and publicize opportunities for small businesses seeking to meet DOE support requirements. Opportunities will be available for attendees to learn of potential partnerships with prime and subcontracting companies. These Energy Industry Day events would both support the agency's commitment to DOE's "Small Business First Policy" and would provide dedicated sessions that introduce Energy Service Companies (ESCOs) and other prime contract holders with small business.

  3. Consulting Services Featured Companies

    E-Print Network [OSTI]

    Park, Byungwoo

    industry. These featured patents are promising in the global intellectual property marketplace. Scientist Profile Scientists who have been involved in the energy industry are interviewed by REGI to share in the renewable energy industry. Home » Key Scientific Articles The effect of a blocking layer on the photovoltaic

  4. Services Breakout: Expressiveness Challenges

    E-Print Network [OSTI]

    Polz, Martin

    industry standards? a) What to accomplish? b) How? 5. Address specific DAML+OIL challenges for DAML. · Make sure SSDL is compatible with industry standards. Actions: · Analyze requirements: impact Action Items #12;4. How do we align "DAML-S" with emerging industry standards? a) What to accomplish? b

  5. The Role of Demand Response in Default Service Pricing

    SciTech Connect (OSTI)

    Barbose, Galen; Goldman, Chuck; Neenan, Bernie

    2006-03-10

    Dynamic retail electricity pricing, especially real-time pricing (RTP), has been widely heralded as a panacea for providing much-needed demand response in electricity markets. However, in designing default service for competitive retail markets, demand response often appears to be an afterthought. But that may be changing as states that initiated customer choice in the past 5-7 years reach an important juncture in retail market design. Most states with retail choice established an initial transitional period, during which utilities were required to offer a default or ''standard offer'' generation service, often at a capped or otherwise administratively-determined rate. Many retail choice states have reached, or are nearing, the end of their transitional period and several states have adopted an RTP-type default service for large commercial and industrial (C&I) customers. Are these initiatives motivated by the desire to induce greater demand response, or is RTP being called upon to serve a different role in competitive markets? Surprisingly, we found that in most cases, the primary reason for adopting RTP as the default service was not to encourage demand response, but rather to advance policy objectives related to the development of competitive retail markets. However, we also find that, if efforts are made in its design and implementation, default RTP service can also provide a solid foundation for developing price responsive demand, creating an important link between wholesale and retail market transactions. This paper, which draws from a lengthier report, describes the experience to date with default RTP in the U.S., identifying findings related to its actual and potential role as an instrument for cultivating price responsive demand [1]. For each of the five states currently with default RTP, we conducted a detailed review of the regulatory proceedings leading to its adoption. To further understand the intentions and expectations of those involved in its design and implementation, we also interviewed regulatory staff and utilities in each state, as well as eight of the most prominent competitive retail suppliers operating in these markets which, together, comprised about 60-65% of competitive C&I sales in the U.S. in 2004 [2].

  6. Energy Conservation Projects to Benefit the Railroad Industry

    SciTech Connect (OSTI)

    Clifford Mirman; Promod Vohra

    2009-12-31

    The Energy Conservation Projects to benefit the railroad industry using the Norfolk Southern Company as a model for the railroad industry has five unique tasks which are in areas of importance within the rail industry, and specifically in the area of energy conservation. The NIU Engineering and Technology research team looked at five significant areas in which research and development work can provide unique solutions to the railroad industry in energy the conservation. (1) Alternate Fuels - An examination of various blends of bio-based diesel fuels for the railroad industry, using Norfolk Southern as a model for the industry. The team determined that bio-diesel fuel is a suitable alternative to using straight diesel fuel, however, the cost and availability across the country varies to a great extent. (2) Utilization of fuel cells for locomotive power systems - While the application of the fuel cell has been successfully demonstrated in the passenger car, this is a very advanced topic for the railroad industry. There are many safety and power issues that the research team examined. (3) Thermal and emission reduction for current large scale diesel engines - The current locomotive system generates large amount of heat through engine cooling and heat dissipation when the traction motors are used to decelerate the train. The research team evaluated thermal management systems to efficiently deal with large thermal loads developed by the operating engines. (4) Use of Composite and Exotic Replacement Materials - Research team redesigned various components using new materials, coatings, and processes to provide the needed protection. Through design, analysis, and testing, new parts that can withstand the hostile environments were developed. (5) Tribology Applications - Identification of tribology issues in the Railroad industry which play a significant role in the improvement of energy usage. Research team analyzed and developed solutions which resulted in friction modification to improve energy efficiency.

  7. Process Industries Division CALL FOR PAPERS

    E-Print Network [OSTI]

    Müller, Norbert

    Process Industries Division CALL FOR PAPERS The Process Industries Division of ASME is sponsoring a series of sessions on issues facing Process industries, such as Heat Exchangers Performance, Compression Technology, Water Purification / Treatment Technologies, Low Temperature Industrial Applications, etc

  8. Productivity benefits of industrial energy efficiency measures

    E-Print Network [OSTI]

    Worrell, Ernst

    2011-01-01

    installations in the paper industry. In: Proceedings 1995in the pulp and paper industry, food processing, industrialIndustry Number of case studies Food manufacturing Building materials Steel manufacturing Paper

  9. printed on recycled paper INDUSTRIAL ASSESSMENT CENTER

    E-Print Network [OSTI]

    printed on recycled paper INDUSTRIAL ASSESSMENT CENTER ENERGY EFFICIENCY, POLLUTION PREVENTION, AND PRODUCTIVITY IMPROVEMENT ASSISTANCE FOR INDUSTRY A U.S. DEPARTMENT OF ENERGY SPONSORED PROGRAM INDUSTRIAL STATE UNIVERSITY Industrial Assessment Center Department of Mechanical Engineering Fort Collins

  10. industrial & systems (ISE) Industrial and Systems engineers use engineering and business principles

    E-Print Network [OSTI]

    Rohs, Remo

    74 industrial & systems (ISE) Industrial and Systems engineers use engineering and business to help companies compete in today's global marketplace. The Industrial and Systems engineer's task. Programs Available · Industrial and Systems Engineering Bachelor of Science 128 units · Industrial

  11. industrial & systems (ISE) Industrial and Systems Engineers use engineering and business prin-

    E-Print Network [OSTI]

    Rohs, Remo

    70 industrial & systems (ISE) Industrial and Systems Engineers use engineering and business prin to help companies compete in today's global marketplace. The Industrial and Systems Engineer's task Available · Industrial and Systems Engineering Bachelor of Science 129 units · Industrial and Systems

  12. industrial & systems (ISE) Industrial and Systems Engineers use engineering and business principles

    E-Print Network [OSTI]

    Rohs, Remo

    70 industrial & systems (ISE) Industrial and Systems Engineers use engineering and business systems to help companies compete in today's global marketplace. The Industrial and Systems Engineer. Programs Available · Industrial and Systems Engineering Bachelor of Science 129 units · Industrial

  13. ITP Chemicals: Industrial Feedstock Flexibility Workshop Results...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industrial Feedstock Flexibility Workshop Results, December 2009 ITP Chemicals: Industrial Feedstock Flexibility Workshop Results, December 2009 feedstockworkshopreport.pdf More...

  14. Guiding Principles for Successfully Implementing Industrial Energy...

    Office of Environmental Management (EM)

    Guiding Principles for Successfully Implementing Industrial Energy Assessment Recommendations Guiding Principles for Successfully Implementing Industrial Energy Assessment...

  15. ITP Industrial Materials: Development and Commercialization of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industrial Materials: Development and Commercialization of Alternative Carbon Fiber Precursors and Conversion Technologies ITP Industrial Materials: Development and...

  16. Midstate Electric Cooperative - Commercial and Industrial Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commercial and Industrial Energy Efficiency Rebate Program Midstate Electric Cooperative - Commercial and Industrial Energy Efficiency Rebate Program < Back Eligibility Commercial...

  17. Academic-Industry Collaboration (AIC) - Synchrophasor Engineering...

    Energy Savers [EERE]

    Academic-Industry Collaboration (AIC) - Synchrophasor Engineering Education Program: Information Exchange Webinar (March 6, 2014) Academic-Industry Collaboration (AIC) -...

  18. Colorado State University Industrial Assessment Center Saves...

    Energy Savers [EERE]

    Industrial Assessment Center Saves Manufacturers Money and Trains the Next Generation of Engineers Colorado State University Industrial Assessment Center Saves...

  19. Southeast Electronic Book of Industrial Resources

    SciTech Connect (OSTI)

    2010-06-25

    This Industrial Technologies Program handbook connects industry with the various energy efficiency resources available in the midwest.

  20. Advanced Manufacturing Office (Formerly Industrial Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing Office (Formerly Industrial Technologies Program) Advanced Manufacturing Office (Formerly Industrial Technologies Program) Presented at the NREL Hydrogen and Fuel...

  1. The Industrialization of Thermoelectric Power Generation Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Industrialization of Thermoelectric Power Generation Technology The Industrialization of Thermoelectric Power Generation Technology Presents module and system requirements for...

  2. EMPLOYEE BENEFIT SERVICE Signature Service Oil Change

    E-Print Network [OSTI]

    New Mexico, University of

    UNM Staff EMPLOYEE BENEFIT SERVICE Jiffy Lube Signature Service Oil Change Fast - No Appointment We change your oil with up to 5 quarts of major brand motor oil We install a new oil fi We visually inspect. ASE training programs · Jiffy Lube uses top quality products that meet or exceed vehicle warranty

  3. Finance & Administrative Services Office of Accounting Services

    E-Print Network [OSTI]

    Harms, Kyle E.

    Finance & Administrative Services Office of Accounting Services Payroll 204 Thomas Boyd Hall when there is any change to their bank and/or bank account(s) that affects their direct deposit to disbursing funds from their account. Employees with a qualifying hardship, or students whose salary is funded

  4. Vortical and industrial interactions

    SciTech Connect (OSTI)

    Barr, P.K. [Sandia National Labs., Livermore, CA (United States). Combustion Research Facility

    1995-05-01

    A vortex-dynamics-based model has been developed and used to study the importance of flame extinction by fluid dynamic strain that occurs in a pulse combustor. Results show that flame extinction by fluid dynamic stretch, which occurs during injection of the fresh charge, ensures the correct phase relation between the energy release and the resonant pressure wave. This phasing is required by Rayleigh`s criterion for stable combustion-driven oscillations. However, this model also showed that the vortex dynamics technique is not at a stage where design engineers can use it as a predictive tool, just as they would use experimental testing. This is in part because pulse combustor designs being developed today use three-dimensional geometries and complex operating conditions, whereas the vortex model simulates processes occurring only in the combustion chamber, and ignores the rest of the pulse combustor unit. Also, the model assumes two-dimensional flow, a simple combustor geometry, and premixed combustion. A successful in-house manufacturing design code must be able to perform a complete design study reliably, quickly and easily, and on computers that are readily available to industry. Instead, the insight gained from the vortex dynamics model is being incorporated into a computational tool to assist in pulse combustor design. This tool will be used by industrial engineers to design pulse combustors for specific applications. The design tool combines submodels for acoustics, injection and combustion, producing a pulse combustor model that dynamically couples the processes in the combustion chamber to the acoustic waves.

  5. INDUST: An Industrial Data Base 

    E-Print Network [OSTI]

    Wilfert, G. L.; Moore, N. L.

    1987-01-01

    the latest EIA pro visional estimate of energy consumption (in trillion Btu) for 1985. The EIA reports fuel consumption according to five categories: electricity, fuel oil, natural gas, coal and coke, and other fuels. As Figure 2 shows, natural gas... for the U.S. Department of Energy (DOE), has used INDUST in assessing industrial equipment and technology research for DOE's Office of Industrial Programs. Battelle has also used INDUST in some of its con tract research relating to industrial technology...

  6. Running Large Scale Jobs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    try on their large scale applications on Hopper for better performance. Try different compilers and compiler options The available compilers on Hopper are PGI, Cray, Intel, GNU,...

  7. Delivering telecommunications services in local markets : a case study outlining implementation challenges

    E-Print Network [OSTI]

    Aubry, Ronan

    2010-01-01

    In numerous industries, the competitive landscape significantly evolved in the last few decades. From local organizations serving local customers with a portfolio of products and services adapted and dedicated to the ...

  8. Towards a Composition Framework for E-/M-Services Zakaria Maamar

    E-Print Network [OSTI]

    Sheng, Michael

    vacation can access a tourism site and specify their needs in terms of favourite airliner, accommodation with other E-services in order to achieve high-level busi- ness processes. In the tourism industry, several

  9. Tobacco and the Movie Industry

    E-Print Network [OSTI]

    Charlesworth, Annemarie MA.; Glantz, Stanton A. Ph.D.

    2006-01-01

    General. Master settlement agreement. 1998. Available at:industry signed the Master Settlement Agreement with state2 years, the Master Settlement Agreement had little short-

  10. Industrial Feedstock Flexibility Workshop Results

    SciTech Connect (OSTI)

    Ozokwelu, Dickson; Margolis, Nancy; Justiniano, Mauricio; Monfort, Joe; Brueske, Sabine; Sabouni, Ridah

    2009-08-01

    This report (PDF 649 KB) summarizes the results of the 2009 Industrial Feedstock Flexibility Workshop, which took place in Atlanta, GA on August 19-20, 2009.

  11. FAQS Reference Guide – Industrial Hygiene

    Broader source: Energy.gov [DOE]

    This reference guide addresses the competency statements in the November 2007 edition of DOE-STD-1138-2007, Industrial Hygiene Functional Area Qualification Standard.

  12. Common Industrial Lighting Upgrade Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    is used to regulate the ongoing electricity provided to the lamp. COMMON INDUSTRIAL LIGHTING UPGRADE TECHNOLOGIES Due to the phase-out of the incandescent bulb and magnetic...

  13. Industrial energy management and utilization

    SciTech Connect (OSTI)

    Witte, L.C.; Schmidt, P.S.; Brown, D.

    1986-01-01

    This text covers the principles of industrial energy conservation and energy conservation applications, with emphasis on the energy-intensive industries. Topics covered include energy consumption, alternative energy sources, elements of energy audits, economic investment analysis, management of energy conservation programs, boilers and fired heaters, steam and condensate systems, classification and fouling of heat exchangers, heat transfer augmentation, waste heat sources, heat recovery equipment, properties and characteristics of insulation, energy conservation in industrial buildings, cogeneration, power circuit components and energy conversion devices, electrical energy conservation. A review of the fundamentals of fluid mechanics, heat transfer, and thermodynamics, as well as examples, problems, and case studies from specific industries are included.

  14. Industrial Partnerships | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    30, 2010 - Through new collaborations totaling 6.2 million, ORNL and American industry will tackle some of the most critical challenges facing lithium ion battery production....

  15. China's Nuclear Industry After Fukushima

    E-Print Network [OSTI]

    YUAN, Jingdong

    2013-01-01

    s Nuclear Industry After Fukushima Jingdong YUAN SummaryT he March 2011 Fukushima nuclear accident has had aand speedy responses to Fukushima-like and other unexpected

  16. Development of a New Class of Fe-3Cr-W(V)Ferritic STeels for Industrial Process Applications

    SciTech Connect (OSTI)

    Jawad, M.

    2005-03-31

    The project described in this report dealt with improving the materials performance and fabrication for hydrotreating reactor vessels, heat recovery systems, and other components for the petroleum and chemical industries. The petroleum and chemical industries use reactor vessels that can approach ship weights of approximately 300 tons with vessel wall thicknesses of 3-8 in. These vessels are typically fabricated from Fe-Cr-Mo steels with chromium ranging from 1.25 to 12% and molybdenum from 1 to 2%. Steels in this composition range have great advantages of high thermal conductivity, low thermal expansion, low cost, and good properties obtainable by heat treatment. With all of the advantages of Fe-Cr-Mo steels, several issues are faced in design and fabrication of vessels and related components. These issues include the following: 1. The low strengths of current alloys require thicker sections. 2. Increased thickness causes heat-treatment issues related to nonuniformity across the thickness and thus a failure to achieve optimum properties. 3. Fracture toughness (ductile-to-brittle transition) is a critical safety issue for these vessels, especially in thick sections because of the nonuniformity of the microstructure. 4. The postweld heat treatment (PWHT) needed after welding makes fabrication more timeconsuming with increased cost. 5. PWHT needed after welding also limits any modifications of the large vessels in service. The goal of this project was to reduce the weight of large-pressure-vessel components (ranging from 100 to 300 tons) by approximately 25%, reduce fabrication cost, and improve in-service modification feasibility through development of Fe-3Cr-W(V) steels with a combination of nearly a 50% higher strength, a lower ductile-brittle transition temperature (DBTT), a higher upper-shelf energy, ease of heat treating, and a strong potential for not requiring PWHT.

  17. Coiled tubing - Operations and services

    SciTech Connect (OSTI)

    Blount, C.G. )

    1993-05-01

    Perhaps the most exciting area of coil tubing technology in the oil and gas industry is the development and testing of specialized tools for improving existing operations or meeting the requirements of new applications and techniques. A new generation of surface equipment and downhole tools will greatly expand through-tubing well servicing utility. This paper provides descriptions of current peripheral devices for concentric well work. It also includes a look at what's needed to meet future challenges and advance this technology. It specifically discusses various forms of fishing tools, power tongs used for bring drill stem, orienting tools for drilling, downhole adjustment tools, steering tools, well casing materials, perforation tools, and various other support equipment.

  18. Flight hardware development for a space-based robotic assembly and servicing testbed

    E-Print Network [OSTI]

    McCarthy, Bryan Patrick

    2014-01-01

    Robotic assembly and servicing missions in space are becoming increasingly attractive for their potential to expand space capabilities and save money. Future missions may construct large systems on-orbit, service existing ...

  19. Web services @ MIT

    E-Print Network [OSTI]

    Tyagi, Sapna DevendraSingh, 1978-

    2004-01-01

    There are several useful web services developed at MIT by students, faculty and researchers. However, they are scattered all over MIT. Most people at MIT are unaware of the availability of these web services and hence they ...

  20. Commercial Aircraft Corporation of China (Comac) attempts to break the Airbus-Boeing duopoly, will it succeed? : an industry analysis framework applied

    E-Print Network [OSTI]

    Fuentes, Jose L., S.M. Massachusetts Institute of Technology

    2011-01-01

    Using an industry analysis framework, this thesis analyzes whether the recently established Commercial Aircraft Corporation of China (Comac) is likely to break the Boeing-Airbus duopoly in the industry of large commercial ...

  1. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsofProgram: Report AppendicesAVideo »Services Services IntegratedServicesServices

  2. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsofProgram: Report AppendicesAVideo »Services ServicesServices Services The

  3. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsofProgram: Report AppendicesAVideo »Services ServicesServices Services

  4. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsofProgram: Report AppendicesAVideo »Services ServicesServicesServices

  5. Industrial process heat case studies. [PROSYS/ECONMAT code

    SciTech Connect (OSTI)

    Hooker, D.W.; May, E.K.; West, R.E.

    1980-05-01

    Commercially available solar collectors have the potential to provide a large fraction of the energy consumed for industrial process heat (IPH). Detailed case studies of individual industrial plants are required in order to make an accurate assessment of the technical and economic feasibility of applications. This report documents the results of seven such case studies. The objectives of the case study program are to determine the near-term feasibility of solar IPH in selected industries, identify energy conservation measures, identify conditions of IPH systems that affect solar applications, test SERI's IPH analysis software (PROSYS/ECONOMAT), disseminate information to the industrial community, and provide inputs to the SERI research program. The detailed results from the case studies are presented. Although few near-term, economical solar applications were found, the conditions that would enhance the opportunities for solar IPH applications are identified.

  6. Measuring industrial energy efficiency: Physical volume versus economic value

    SciTech Connect (OSTI)

    Freeman, S.L.; Niefer, M.J.; Roop, J.M.

    1996-12-01

    This report examines several different measures of industrial output for use in constructing estimates of industrial energy efficiency and discusses some reasons for differences between the measures. Estimates of volume-based measures of output, as well as 3 value-based measures of output (value of production, value of shipments, and value added), are evaluated for 15 separate 4-digit industries. Volatility, simple growth rate, and trend growth rate estimates are made for each industry and each measure of output. Correlations are made between the volume- and value-based measures of output. Historical energy use data are collected for 5 of the industries for making energy- intensity estimates. Growth rates in energy use, energy intensity, and correlations between volume- and value-based measures of energy intensity are computed. There is large variability in growth trend estimates both long term and from year to year. While there is a high correlation between volume- and value-based measures of output for a few industries, typically the correlation is low, and this is exacerbated for estimates of energy intensity. Analysis revealed reasons for these low correlations. It appears that substantial work must be done before reliable measures of trends in the energy efficiency of industry can be accurately characterized.

  7. Library Services Strategic Plan

    E-Print Network [OSTI]

    Applebaum, David

    1 Library Services Strategic Plan 2013 - 2016 Contents 1. Overview 2. Mission Statements 3. Vision provided by Library Services will be integral to the College's success; therefore this strategic plan defines a vision of how the service will contribute to the achievement of the King's strategic plan over

  8. Mail Services User's Guide

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-10-03

    This Guide provides information on using Department of Energy (DOE) mail services in accordance with U.S. Postal Service, General Services Administration (GSA), and DOE regulations. Cancels DOE M 573.1-1. Canceled by DOE N 251.89.

  9. FOOD SERVICE Professional Organizations

    E-Print Network [OSTI]

    Acton, Scott

    FOOD SERVICE Professional Organizations: National Association of College and University Food National Association of College and University Food Services (NACUFS) conference NACUFS Mid-Atlantic Region of Colleges and University Food Services e-newsletter Social Media: National Association of College

  10. High Power UV LED Industrial Curing Systems

    SciTech Connect (OSTI)

    Karlicek, Robert, F., Jr; Sargent, Robert

    2012-05-14

    UV curing is a green technology that is largely underutilized because UV radiation sources like Hg Lamps are unreliable and difficult to use. High Power UV LEDs are now efficient enough to replace Hg Lamps, and offer significantly improved performance relative to Hg Lamps. In this study, a modular, scalable high power UV LED curing system was designed and tested, performing well in industrial coating evaluations. In order to achieve mechanical form factors similar to commercial Hg Lamp systems, a new patent pending design was employed enabling high irradiance at long working distances. While high power UV LEDs are currently only available at longer UVA wavelengths, rapid progress on UVC LEDs and the development of new formulations designed specifically for use with UV LED sources will converge to drive more rapid adoption of UV curing technology. An assessment of the environmental impact of replacing Hg Lamp systems with UV LED systems was performed. Since UV curing is used in only a small portion of the industrial printing, painting and coating markets, the ease of use of UV LED systems should increase the use of UV curing technology. Even a small penetration of the significant number of industrial applications still using oven curing and drying will lead to significant reductions in energy consumption and reductions in the emission of green house gases and solvent emissions.

  11. Ancillary services market in California

    E-Print Network [OSTI]

    Gomez, Tomas; Marnay, Chris; Siddiqui, Afzal; Liew, Lucy; Khavkin, Mark

    1999-01-01

    on the Operation of the Ancillary Services Markets of theOperator (CAISO). 1999. Ancillary Service Market RedesignMethodology for AGC Ancillary Services Markets. Paper

  12. Gas Turbines Increase the Energy Efficiency of Industrial Processes 

    E-Print Network [OSTI]

    Banchik, I. N.; Bohannan, W. R.; Stork, K.; McGovern, L. J.

    1981-01-01

    It is a well known fact that the gas turbine in a combined cycle has a higher inherent Carnot efficiency than the steam cycle which has been more generally accepted by industry. Unlike steam turbines, gas turbines do not require large boiler feed...

  13. Knowledge-Intensive Work in the Oil and Gas Industry

    E-Print Network [OSTI]

    Knowledge-Intensive Work in the Oil and Gas Industry: A Case Study Thesis for the degree collaborative work practices within a large international oil and gas company (OGC). The work is founded empirical findings, we argue that in knowledge-intensive, interdisciplinary work such as oil and gas

  14. The Clinch Bend Regional Industrial Site and economic development opportunities

    SciTech Connect (OSTI)

    1995-12-31

    This effort focuses initially on the Clinch Bend site. Other sites and developable tracts of land are identified with the assistance of communities in proximity to Oak Ridge, the State of Tennessee, and others, and compared with the projected site requirements for large industrial facilities.

  15. Sewerage service charges 

    E-Print Network [OSTI]

    Wright, Samuel Robert

    1946-01-01

    of Sewerage Revenues to Water Revenues in 192 Texas Cities. ? ? ? ? ? ? ? ? ? ? ? ? ? 56 X. Population Equivalents of Some Industrial Wastes. . . . 71 XI. Population Equivalents of Some Industrial Wastes. . . . 72 XII. Population Equivalents of Some... be severely criticized, yet they often think it quite proper to take the waste products from the industry, transport them away, purify them, and dispose of them at the taxpayers' expense* Many cities have fixed their tax rates at the maximum permitted...

  16. Career Choices: Industry vs. Academia

    E-Print Network [OSTI]

    Rohs, Remo

    Career Choices: Industry vs. Academia Yan Liu Assistant Professor Computer Science Department, IBM TJ Watson Research Center · Now, USC #12;1) What career path did you consider most during your Ph industry, and where can one make the most impact? · Best virtues in all jobs ­ Hardworking ­ Good attitude

  17. on technology transfer, industry research +

    E-Print Network [OSTI]

    Cafarella, Michael J.

    on technology transfer, industry research + economic development annual report U N I V E R S I T Y and resources available at the University of Michigan as showcased in this year's Annual Report on Technology Transfer, Industry Research, and Economic Development. At the heart of the University's contributions

  18. Industrial Wastes as a Fuel 

    E-Print Network [OSTI]

    Richardson, G.; Hendrix, W.

    1980-01-01

    available for coal since it was at one time a major industrial fuel and is still used extensively for electric power generation. However, combustion data for other fuels such as wood and solid materials typically generated as industrial wastes can only...

  19. Industrial energy management and utilization

    SciTech Connect (OSTI)

    Witte, L.C.; Schmidt, P.S.; Brown, D.R.

    1988-01-01

    This book presents a study of the technical, economic and management principles of effective energy use. The authors report on: energy consumption, conservation, and resources. They present an analysis of thermal-fluid systems. Energy conservation in combustion systems. Heat exchangers, heat recovery, energy conservation in industrial buildings, and industrial cogeneration are discussed.

  20. Product Service Codes Description: Product Service Codes used...

    Broader source: Energy.gov (indexed) [DOE]

    V301 RELOCATION SERVICES 273 5,828,484 R423 INTELLIGENCE SERVICES 7 5,744,939 R706 LOGISTICS SUPPORT SERVICES 11 5,536,000 S201 CUSTODIAL JANITORIAL SERVICES 5 4,401,160 D304...

  1. Generation of Web Service Descriptions and Web Service

    E-Print Network [OSTI]

    Generation of Web Service Descriptions and Web Service Module Implementation for Concept University of Science and Technology Software Systems Institute (STS) #12;Abstract Nowadays web services in order to initiate the communication. A web services endpoint communication interface utilizes

  2. ENROLLMENT SERVICES Exceptional Service and Solutions

    E-Print Network [OSTI]

    Media Improved service and interaction with students and parents via Facebook and Twitter. #12 individual's actual cost of varying credit loads and housing plans · No user logon required · Available

  3. Hierarchical Nanoceramics for Industrial Process Sensors

    SciTech Connect (OSTI)

    Ruud, James, A.; Brosnan, Kristen, H.; Striker, Todd; Ramaswamy, Vidya; Aceto, Steven, C.; Gao, Yan; Willson, Patrick, D.; Manoharan, Mohan; Armstrong, Eric, N., Wachsman, Eric, D.; Kao, Chi-Chang

    2011-07-15

    This project developed a robust, tunable, hierarchical nanoceramics materials platform for industrial process sensors in harsh-environments. Control of material structure at multiple length scales from nano to macro increased the sensing response of the materials to combustion gases. These materials operated at relatively high temperatures, enabling detection close to the source of combustion. It is anticipated that these materials can form the basis for a new class of sensors enabling widespread use of efficient combustion processes with closed loop feedback control in the energy-intensive industries. The first phase of the project focused on materials selection and process development, leading to hierarchical nanoceramics that were evaluated for sensing performance. The second phase focused on optimizing the materials processes and microstructures, followed by validation of performance of a prototype sensor in a laboratory combustion environment. The objectives of this project were achieved by: (1) synthesizing and optimizing hierarchical nanostructures; (2) synthesizing and optimizing sensing nanomaterials; (3) integrating sensing functionality into hierarchical nanostructures; (4) demonstrating material performance in a sensing element; and (5) validating material performance in a simulated service environment. The project developed hierarchical nanoceramic electrodes for mixed potential zirconia gas sensors with increased surface area and demonstrated tailored electrocatalytic activity operable at high temperatures enabling detection of products of combustion such as NOx close to the source of combustion. Methods were developed for synthesis of hierarchical nanostructures with high, stable surface area, integrated catalytic functionality within the structures for gas sensing, and demonstrated materials performance in harsh lab and combustion gas environments.

  4. Trade and the governance of ecosystem services Richard B. Norgaard, Ling Jin

    E-Print Network [OSTI]

    in production, or production externalities generally, because trade separates consumption from production with an industrial good and a rural good. Industrial good production results in pollution that affects the provision of ecosystem services and thereby the production of the rural good. The assignment of ecosystem rights

  5. Advanced engineering design as practiced today from the view point of the CERN Industrial Liaison Officer

    E-Print Network [OSTI]

    Barone, Michele

    2012-01-01

    After an introduction about CERN, a brief description of the Large Hadron Collider(LHC) it is reviewed. Pros and cons of a few advanced engineering design cases are taken in consideration together with the involvement of the European Industry. The conclusion is that the LHC project has been an important driving force for Innovation in European Industry.

  6. The impact of additives found in industrial formulations of TCE on the wettability of sandstone

    E-Print Network [OSTI]

    Sheffield, University of

    The impact of additives found in industrial formulations of TCE on the wettability of sandstone) that are often encountered in industrial solvent formulations. Wettability assessments were made on sandstone wetting preference of sandstone which frequently resulted in neutral wetting conditions. The large volume

  7. Pattern Alteration: Large Abdomen 

    E-Print Network [OSTI]

    2006-08-04

    A large abdomen causes the hemline on a skirt to hike in front and pulls the side seam forward. This publication gives instructions on altering patterns for a basic skirt and pants....

  8. Service settings for an aging society : a community ordering principle

    E-Print Network [OSTI]

    Nelson, Gaius Grant

    1987-01-01

    Current facility models used in the design of housing and service settings for older people encourage the development of urban, large scale, age-segregated institutional environments. Research has either unwittingly or ...

  9. NIST Measurement Services: cw Laser Power and Energy

    E-Print Network [OSTI]

    . As an agency of the U.S. Commerce Department's Technology Administration, NIST conducts basic and appliedNIST Measurement Services: cw Laser Power and Energy Calibrations at NIST NIST Special Publication and Technology was established in 1988 by Congress to "assist industry in the development of technology

  10. www.noaa.gov/climate Proposed Climate Service in NOAA

    E-Print Network [OSTI]

    domestic product depends on accurate weather and climate information. Concerns from business, industry and information about climate that helps people make informed decisions in their lives, businesses, September 2010 Climate Service Example: Construction NOAA provides air-freezing data to the home building

  11. Clemson University Cooperative Extension Service Reportto the People

    E-Print Network [OSTI]

    Stuart, Steven J.

    , stimulated our local economy by: keeping people at work by educating and certifying workers in the food service, forestry and agriculture industries. keeping costs and waste down by teaching property owners: Vegetable Gardening, Organic Gardening, Making Compost and Mulch, Herb Gardening, Growing Blueberries, Figs

  12. Evolving trend of consolidation in the banking industry : strategies of Mitsubishi UJF Financial Group

    E-Print Network [OSTI]

    Kogure, Takeshi

    2006-01-01

    Consolidation in the financial industry has progressed rapidly in many countries. In the United States, large financial corporations, such as Citigroup and JP Morgan Chase, formed complex financial groups and conglomerate ...

  13. Waterfront views : defining a new planning process for Brooklyn's post-industrial waterfronts

    E-Print Network [OSTI]

    Grassi, Carrie

    2006-01-01

    The study of waterfront planning largely focuses on the physical reconnection of the post-industrial, downtown waterfront with the spatial fabric of the city. Attention is given to the need for clarity of regulations, ...

  14. An investigation of a professional development program using industry partnerships and student achievement 

    E-Print Network [OSTI]

    Sullivan, Helen Grace

    2008-10-10

    This investigation examined the impact on student achievement of teachers who participated in a professional development program using industry partnerships. One treatment and one non-treatment school in a large urban school district served...

  15. Demand Side Dispatching, Part 1: A Novel Approach for Industrial Load Shaping Applications 

    E-Print Network [OSTI]

    Kumana, J. D.; Nath, R.

    1993-01-01

    In order to develop effective Demand Side Management (DSM) programs, it is important to properly understand the cogeneration capabilities of large industrial customers. Projecting historical trends may be simple and convenient, but can lead...

  16. Characterization of the U.S. Industrial/Commercial Boiler Population- Final Report, May 2005

    Broader source: Energy.gov [DOE]

    The U.S. industrial and commercial sectors consume large quantities of energy. Much of this energy is used in boilers to generate steam and hot water. This 2005 report characterizes the boilers in...

  17. Form 1410 FR.13 Instructions Internal Service Providers: Registration

    E-Print Network [OSTI]

    new customers, anticipated large reduction in customers, new products/services, and/or reduced Service Providers (ISPs) are required to complete an ISP Registration form when initially registering $100,000 annually), GC-Recharge Center > $100k (sponsored activity to $100,000 annually), or Cost

  18. UNDERGRADUATE DEGREES Industrial and Systems Engineering

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    UNDERGRADUATE DEGREES Industrial and Systems Engineering The Bachelor's Degree in Industrial, consulting at amusement parks, analyzing systems, and beyond. SYSTEMS ScIENcE AND INDUSTRIAl ENGINEERING of Engineering in Industrial Engineering (MEng IE) equips graduates to be effective in industry and provides

  19. Industrial Symbiosis and the Greening of the Industry in the UK: The Case of the National Industrial Symbiosis Programme 

    E-Print Network [OSTI]

    Albertini, Vivian

    2011-08-23

    Industrial Symbiosis is part of the emerging field of Industrial Ecology, a discipline that looks at natural ecosystems as models for the development of new industrial systems. As part of the recent efforts towards environmental sustainability, many...

  20. The industrial ecology of the iron casting industry

    E-Print Network [OSTI]

    Jones, Alissa J. (Alissa Jean)

    2007-01-01

    Metal casting is an energy and materials intensive manufacturing process, which is an important U.S. industry. This study analyzes iron casting, in particular, for possible improvements that will result in greater efficiencies ...