National Library of Energy BETA

Sample records for lamp-post top luminaire

  1. Assessment of LED Technology in Ornamental Post-Top Luminaires. Sacramento, CA

    SciTech Connect (OSTI)

    Tuenge, J. R.; Bryan, M. M.; Bisbee, D. A.

    2011-12-01

    GATEWAY program report on a demonstration of LED ornamental post-top luminaires in a residential part of Sacramento, CA.

  2. Assessment of LED Technology in Ornamental Post-Top Luminaires (Host Site: Sacramento, CA)

    SciTech Connect (OSTI)

    Tuenge, Jason R.

    2011-12-01

    The DOE Municipal Solid-State Street Lighting Consortium has evaluated four different LED replacements for existing ornamental post-top street lights in Sacramento, California. The project team was composed of the City and its consultant, PNNL (representing the Consortium), and the Sacramento Municipal Utility District. Product selection was finalized in March 2011, yielding one complete luminaire replacement and three lamp-ballast retrofit kits. Computer simulations, field measurements, and laboratory testing were performed to compare the performance and cost-effectiveness of the LED products relative to the existing luminaire with 100 W high-pressure sodium lamp. After it was confirmed the LED products were not equivalent to HPS in terms of initial photopic illumination, the following parameters were scaled proportionally to enable equitable (albeit hypothetical) comparisons: light output, input wattage, and pricing. Four replacement scenarios were considered for each LED product, incorporating new IES guidance for mesopic multipliers and lumen maintenance extrapolation, but life cycle analysis indicated cost effectiveness was also unacceptable. Although LED efficacy and pricing continue to improve, this project serves as a timely and objective notice that LED technology may not be quite ready yet for such applications.

  3. Thermal trim for luminaire

    DOE Patents [OSTI]

    Bazydola, Sarah; Ghiu, Camil-Daniel; Harrison, Robert; Jeswani, Anil

    2013-11-19

    A luminaire with a thermal pathway to reduce the junction temperature of the luminaire's light source, and methods for so doing, are disclosed. The luminaire includes a can, a light engine, and a trim, that define a substantially continuous thermal pathway from the light engine to a surrounding environment. The can defines a can cavity and includes a can end region. The light engine is within the can cavity and includes a light source and a heat sink, including a heat sink end region, coupled thereto. The trim is at least partially disposed within the can cavity and includes a first trim end region coupled to the heat sink end region and a second trim end region coupled to the can end region. Thermal interface material may be located between: the heat sink and the trim, the trim and the can, and/or the heat sink and the light source.

  4. Next Generation Luminaires Design Competition Announces 2014...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Next Generation Luminaires Design Competition Announces 2014 Indoor Winners Next Generation Luminaires Design Competition Announces 2014 Indoor Winners September 17, 2014 - 1:53pm...

  5. Thermal trim for a luminaire

    DOE Patents [OSTI]

    Bazydola, Sarah; Ghiu, Camil-Daniel; Harrison, Robert; Jeswani, Anil

    2013-02-19

    A luminaire with a thermal pathway to reduce the junction temperature of the luminaire's light source, and methods for so doing, are disclosed. The luminaire includes a can, a light engine, and a trim, that define a substantially continuous thermal pathway from the light engine to a surrounding environment. The can defines a can cavity and includes a can end region. The light engine is within the can cavity and includes a light source and a heat sink, including a heat sink end region, coupled thereto. The trim is at least partially disposed within the can cavity and includes a first trim end region coupled to the heat sink end region and a second trim end region coupled to the can end region. Thermal interface material may be located between: the heat sink and the trim, the trim and the can, and/or the heat sink and the light source.

  6. Covered Product Category: Fluorescent Luminaires

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including fluorescent luminaires. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  7. System Reliability Model for Solid-State Lighting Luminaires...

    Energy Savers [EERE]

    System Reliability Model for Solid-State Lighting Luminaires System Reliability Model for Solid-State Lighting Luminaires Lead Performer: RTI International - Research Triangle...

  8. Covered Product Category: Industrial Luminaires (High/Low Bay...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    that for FEMP-designated luminaires fewer luminaires can be used to provide equivalent light output. Exceptions Products meeting FEMP-designated efficiency requirements or...

  9. Next Generation Luminaire (NGL) Downlight Demonstration Project...

    Broader source: Energy.gov (indexed) [DOE]

    lamps in the existing CFL downlights at St. Anthony Hospital in Gig Harbor, WA. Next Generation Luminaire (NGL) Downlight Demonstration Project: St. Anthony Hospital More Documents...

  10. Next Generation Luminaires Design Competition Announces 2013...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cree for its CPY250 canopy luminaire Louis Poulsen Lighting for its LP ICON LED pedestrian walkway fixture More information on all the winning entries is available at...

  11. Next Generation Luminaires Design Competition Announces 2015...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Outstanding for Versatility for its Olivio LED Sistema 2 LED pole-mounted pedestrian-scale luminaire. Finelite, Inc.: Awarded Outstanding for Serviceability for its...

  12. Covered Product Category: Light Fixtures (Luminaires)

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including luminaires, or light fixtures. The luminaires product category is very broad and covers a wide variety of lighting products. Both ENERGY STAR® and FEMP provide programmatic guidance for various types of luminaires. See table 2 for more information about which types of light fixtures are covered by which program (FEMP or ENERGY STAR). Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  13. Insights into accelerated aging of SSL luminaires

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Davis, J. Lynn; Lamvik, Michael; Bittle, James; Shepherd, Sarah; Yaga, Robert; Baldasaro, Nick; Solano, Eric; Bobashev, Georgiy

    2013-09-30

    Although solid-state lighting (SSL) products are often intended to have product lifetimes of 15 years or more, the rapid change in technology has created a need for accelerated life tests (ALTs) that can be performed in the span of several months. A critical element of interpreting results from any systems-level ALT is understanding of the impact of the test environment on each component. Because of its ubiquity in electronics, the use of temperature-humidity environments as potential ALTs for SSL luminaires was investigated. Results from testing of populations of three commercial 6” downlights in environments of 85oC and 85% relative humiditymore »(RH) and 75oC and 75% RH are reported. These test environments were found to accelerate lumen depreciation of the entire luminaire optical system, including LEDs, lenses, and reflectors. The effects of aging were found to depend strongly on both the optical materials that were used and the design of the luminaire; this shows that the lumen maintenance behavior of SSL luminaires must be addressed at the optical systems level. Temperature-Humidity ALTs can be a useful test in understand lumainaire depreciation provided that proper consideration is given to the different aging rates of various materials. Since the impact of the temperature-humidity environment varies among components of the optical system, uniform aging of all system components in a single test is difficult to achieve.« less

  14. Insights into accelerated aging of SSL luminaires

    SciTech Connect (OSTI)

    Davis, J. Lynn; Lamvik, Michael; Bittle, James; Shepherd, Sarah; Yaga, Robert; Baldasaro, Nick; Solano, Eric; Bobashev, Georgiy

    2013-09-30

    Although solid-state lighting (SSL) products are often intended to have product lifetimes of 15 years or more, the rapid change in technology has created a need for accelerated life tests (ALTs) that can be performed in the span of several months. A critical element of interpreting results from any systems-level ALT is understanding of the impact of the test environment on each component. Because of its ubiquity in electronics, the use of temperature-humidity environments as potential ALTs for SSL luminaires was investigated. Results from testing of populations of three commercial 6” downlights in environments of 85oC and 85% relative humidity (RH) and 75oC and 75% RH are reported. These test environments were found to accelerate lumen depreciation of the entire luminaire optical system, including LEDs, lenses, and reflectors. The effects of aging were found to depend strongly on both the optical materials that were used and the design of the luminaire; this shows that the lumen maintenance behavior of SSL luminaires must be addressed at the optical systems level. Temperature-Humidity ALTs can be a useful test in understand lumainaire depreciation provided that proper consideration is given to the different aging rates of various materials. Since the impact of the temperature-humidity environment varies among components of the optical system, uniform aging of all system components in a single test is difficult to achieve.

  15. Purchasing Energy-Efficient Suspended Fluorescent Luminaires

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance for suspended fluorescent luminaires, a product category covered by FEMP efficiency requirements. Federal laws and requirements mandate that agencies purchase ENERGY STAR-qualified or FEMP-designated products in all product categories covered by these programs and in any acquisition actions that are not specifically exempted by law.

  16. Purchasing Energy-Efficient Commercial and Industrial LED Luminaires

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance for commercial and industrial light emitting diode (LED) luminaires, a product category covered by FEMP efficiency...

  17. DOE Publishes Report on Accelerated Life Testing of SSL Luminaires...

    Energy Savers [EERE]

    (DOE) has published the findings of a new study utilizing a highly accelerated life-test method (called the "hammer test") intended to produce failures in SSL luminaires in a...

  18. Model Specification for LED Roadway Luminaires, V2.0

    Office of Energy Efficiency and Renewable Energy (EERE)

    Version 2.0 of the Model Specification for LED Roadway Luminaires is now available. Changes are substantial and include streamlined structure and formatting, new diagrams, updated references, and leveraging of LED Lighting Facts® program guidance.

  19. OLED Luminaire with Panel Integrated Drivers and Advanced Controls...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of the panels. The goal is to demonstrate a luminaire with an efficacy of 65 lmW and a luminous output of 4000 lm. Project Impact This advancement in OLED technology could lead...

  20. TEXT-ALTERNATIVE VERSION: NEXT GENERATION LUMINAIRES INDOOR JUDGING 2014

    Broader source: Energy.gov [DOE]

    Dan Blitzer, NGL Steering Committee, The Practical Lighting Workshop: Products that have been evaluated by the Next Generation Luminaires Design Competition have been vetted to a degree that no...

  1. Scalable Light Module for Low-Cost, High Efficiency LED Luminaires...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Scalable Light Module for Low-Cost, High Efficiency LED Luminaires Scalable Light Module for Low-Cost, High Efficiency LED Luminaires Lead Performer: Cree, Inc. - Durham, NC DOE...

  2. Text-Alternative Version: Successful Selection of LED Streetlight Luminaires Webcast

    Office of Energy Efficiency and Renewable Energy (EERE)

    Below is the text-alternative version of the "Successful Selection of LED Streetlight Luminaires" webcast, held March 6, 2013.

  3. Text-Alternative Version: Model Specification for LED Roadway Luminaires Webcast

    Office of Energy Efficiency and Renewable Energy (EERE)

    Below is the text-alternative version of the "Model Specification for LED Roadway Luminaires" webcast, held November 15, 2011.

  4. Demonstration Assessment of Light-Emitting Diode (LED) Post-Top...

    Office of Scientific and Technical Information (OSTI)

    Central Park in New York City A review of five post-top light-emitting diode (LED) pedestrian luminaires installed in New York City's Central Park for possible replacement to the...

  5. Covered Product Category: Industrial Luminaires (High/Low Bay)

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for Industrial Luminaires (High/Low Bay). Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  6. Ultra-Compact High-Efficiency Luminaire for General Illumination

    SciTech Connect (OSTI)

    Ted Lowes

    2012-04-08

    Cree has developed a new ultra-compact light emitting diode (LED) luminaire capable of providing high efficacy with excellent color quality that can lead to significant energy savings in todayâ??s commercial and retail applications. This success was based on an integrated development effort tailoring the LED component characteristics, optics, thermal management and driver design for the small footprint to achieve an overall system efficiency of â?¥ 70%. A new LED component was designed to provide high brightness and efficacy in a form factor that allowed for a small directional beam with a luminaire housing design able to dissipate the heat effectively using a small physical envelope. A very compact, 90% efficient driver was developed to meet the system performance while not taking away any thermal mass from the heat sink. A 91% efficient secondary optics was designed to maximize efficiency while providing a smooth beam. The reliability of the new LED component was robust under accelerated testing conditions. Luminaires were assembled integrating the novel LED component, secondary optics, heat sink and driver technology to demonstrate the system improvement. Cree has successfully completed this project by developing an ultra-compact LED luminaire that provided 380 lumens at a correlated color temperature (CCT) of 2822 K and color rendering index (CRI) of 94 with an efficacy of 94 lumens per watt (LPW) when operating at 4 W input power (steady state) with an overall system efficiency of 81%. At a higher input power of 9 Watts, the lamp provided 658 lumens at 71 LPW.

  7. Purchasing Energy-Efficient Ceiling-Mounted Fluorescent Luminaires

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance for ceiling-mounted fluorescent luminaires, a product category covered by FEMP efficiency requirements. Federal laws and requirements mandate that agencies purchase ENERGY STAR-qualified or FEMP-designated products in all product categories covered by these programs and in any acquisition actions that are not specifically exempted by law.

  8. Text-Alternative Version: SSL Luminaire Performance in the Lab: Just How Well Do They Perform?

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the SSL Luminaire Performance in the Lab: Just How Well Do They Perform webcast.

  9. Next Generation Luminaire (NGL) Downlight Demonstration Project, Hilton Columbus Downtown

    SciTech Connect (OSTI)

    Davis, R. G.; Perrin, T. E.

    2014-09-30

    At the Hilton Columbus Downtown hotel in Ohio, DOE's Better Buildings Alliance conducted a demonstration of Next Generation Luminaires-winning downlights installed in all guest rooms and suites prior to the hotel's 2012 opening. After a post-occupancy assessment, the LED downlights not only provided the aesthetic appearance and dimming functionality desired, but also provided 50% energy savings relative to a comparable CFL downlight and enabled the lighting power to be more than 20% below that allowed by code.

  10. Development of High Efficacy, Low Cost Phosphorescent Oled Lightning Luminaire

    SciTech Connect (OSTI)

    Michael Hack

    2010-07-09

    In this two year program, UDC together with Armstrong World Industries, Professor Stephen Forrest (University of Michigan) and Professor Mark Thompson (University of Southern California) planned to develop and deliver high efficiency OLED lighting luminaires as part of an integrated ceiling illumination system that exceed the Department of Energy (DOE) 2010 performance projections. Specifically the UDC team in 2010 delivered two prototype OLED ceiling illumination systems, each consisting of four individual OLED lighting panels on glass integrated into Armstrong's novel TechZone open architecture ceiling systems, at an overall system efficacy of 51 lm/W, a CRI = 85 and a projected lifetime to 70% of initial luminance to exceed 10,000 hours. This accomplishment represents a 50% increase in luminaire efficacy and a factor of two in lifetime over that outlined in the solicitation. In addition, the team has also delivered one 15cm x 15cm lighting panel fabricated on a flexible metal foil substrate, demonstrating the possibility using OLEDs in a range of form factors. During this program, our Team has pursued the commercialization of these OLED based ceiling luminaires, with a goal to launch commercial products within the next three years. We have proven that our team is ideally suited to develop these highly novel and efficient solid state lighting luminaires, having both the technical experience and commercial strategy to leverage work performed under this contract. Our calculations show that the success of our program could lead to energy savings of more than 0.5 quads or 8 MMTC (million metric tons of carbon) per year by 2016.

  11. LOW-COST LED LUMINAIRE FOR GENERAL ILLUMINATION

    SciTech Connect (OSTI)

    Lowes, Ted

    2014-07-31

    During this two-year Solid-State Lighting (SSL) Manufacturing R&D project Cree developed novel light emitting diode (LED) technologies contributing to a cost-optimized, efficient LED troffer luminaire platform emitting at ~3500K correlated color temperature (CCT) at a color rendering index (CRI) of >90. To successfully achieve program goals, Cree used a comprehensive approach to address cost reduction of the various optical, thermal and electrical subsystems in the luminaire without impacting performance. These developments built on Cree’s high- brightness, low-cost LED platforms to design a novel LED component architecture that will enable low-cost troffer luminaire designs with high total system efficacy. The project scope included cost reductions to nearly all major troffer subsystems as well as assembly costs. For example, no thermal management components were included in the troffer, owing to the optimized distribution of compact low- to mid-power LEDs. It is estimated that a significant manufacturing cost savings will result relative to Cree’s conventional troffers at the start of the project. A chief project accomplishment was the successful development of a new compact, high-efficacy LED component geometry with a broad far-field intensity distribution and even color point vs. emission angle. After further optimization and testing for production, the Cree XQ series of LEDs resulted. XQ LEDs are currently utilized in Cree’s AR series troffers, and they are being considered for use in other platforms. The XQ lens geometry influenced the independent development of Cree’s XB-E and XB-G high-voltage LEDs, which also have a broad intensity distribution at high efficacy, and are finding wide implementation in Cree’s omnidirectional A-lamps.

  12. Successful Selection of LED Streetlight Luminaires: Optimizing Illumination and Economic Performance

    Broader source: Energy.gov [DOE]

    This March 6, 2013 webcast reviewed the factors involved in successful selection of LED streetlight luminaires. Presenters Eric Haugaard of Cree Lighting and Chad Stalker of Philips Lumileds guided...

  13. Magical Mystery Devices or Not: How do LED Lamps and Luminaires Really Measure-Up?

    SciTech Connect (OSTI)

    Paget, Maria L.; McCullough, Jeffrey J.; Steward, Heidi E.

    2008-08-15

    Solid-state lighting products for general lighting applications are now gaining a market presence, and more and more people are asking, “Which of these are ‘good’ products? Do they perform as claimed? How do they compare? Light Emitting Diodes (LEDs) differ from other light sources enough to require new procedures for measuring their performance and comparing to other lighting options, so both manufacturers and buyers are facing a learning curve. The energy-efficiency community has traditionally compared light sources based on system efficacy: rated lamp lumens divided by power into the system. This doesn’t work for LEDs because there are no standard LED “lamp” packages and no lamp ratings, and because LED performance depends heavily on thermal, electrical, and optical design of complete lighting unit or ‘luminaire’. Luminaire efficacy is the preferred metric for LEDs because it measures the net light output from the luminaire divided by power into the system.

  14. UDC Teaming with Acuity to Make Commercial-Sector PHOLED Luminaire

    Broader source: Energy.gov [DOE]

    With support from DOE's Small Business Innovation Research program, Universal Display Corporation (UDC) is working with Acuity Brands Lighting to make an efficient, color-tunable luminaire for use in the commercial sector using UDC's proprietary phosphorescent OLED (PHOLED™) technology. The present project aims to adapt this technology—which increases the energy efficiency of OLEDs by as much as fourfold—to high-end commercial and institutional building applications.

  15. Bayesian probabilistic model for life prediction and fault mode classification of solid state luminaires

    SciTech Connect (OSTI)

    Lall, Pradeep [Auburn Univ., Auburn, AL (United States); Wei, Junchao [Auburn Univ., Auburn, AL (United States); Sakalaukus, Peter [Auburn Univ., Auburn, AL (United States)

    2014-06-22

    A new method has been developed for assessment of the onset of degradation in solid state luminaires to classify failure mechanisms by using metrics beyond lumen degradation that are currently used for identification of failure. Luminous Flux output, Correlated Color Temperature Data on Philips LED Lamps has been gathered under 85°C/85%RH till lamp failure. Failure modes of the test population of the lamps have been studied to understand the failure mechanisms in 85°C/85%RH accelerated test. Results indicate that the dominant failure mechanism is the discoloration of the LED encapsulant inside the lamps which is the likely cause for the luminous flux degradation and the color shift. The acquired data has been used in conjunction with Bayesian Probabilistic Models to identify luminaires with onset of degradation much prior to failure through identification of decision boundaries between lamps with accrued damage and lamps beyond the failure threshold in the feature space. In addition luminaires with different failure modes have been classified separately from healthy pristine luminaires. The ?-? plots have been used to evaluate the robustness of the proposed methodology. Results show that the predicted degradation for the lamps tracks the true degradation observed during 85°C/85%RH during accelerated life test fairly closely within the ±20% confidence bounds. Correlation of model prediction with experimental results indicates that the presented methodology allows the early identification of the onset of failure much prior to development of complete failure distributions and can be used for assessing the damage state of SSLs in fairly large deployments. It is expected that, the new prediction technique will allow the development of failure distributions without testing till L70 life for the manifestation of failure.

  16. An Integrated Solid-State LED Luminaire for General Lighting

    SciTech Connect (OSTI)

    Kevin Dowling; Fritz Morgan Ihor Lys; Mike Datta; Bernd Keller; Thomas Yuan

    2009-03-31

    A strong systems approach to designing and building practical LED-based replacement lamps is lacking. The general method of taking high-performance LEDs and marrying them to standard printed circuit boards, drivers and a heat sink has fallen short of the promise of LED lighting. In this program, a top-down assessment of requirements and a bottom-up reinvention of LED sources, electronics, optics and mechanics have resulted in the highest performance lamp possible. The team, comprised of Color Kinetics, the leaders in LED lighting and Cree, the leaders in LED devices took an approach to reinvent the package, the driver and the overall form and aesthetic of a replacement source. The challenge was to create a new benchmark in LED lighting - the resultant lamp, a PAR38 equivalent, met the light output, color, color quality and efficacy marks set out in the program as well as being dimmable, which is important for market acceptance. The approach combined the use of multiple source die, a chip-on-board approach, a very efficient driver topology, the use of both direct emission and phosphor conversion, and a unique faceted optic to avoid the losses, artifacts and hotspots of lensed approaches. The integral heat sink provided a mechanical base and airflow using a chimney-effect for use in a wide variety of locations and orientations. These research results led to a much better understanding of the system effects of component level technologies. It was clear that best-of-breed sub-system results do not necessarily result in the best end result for the complete system. In doing this work, we did not neglect the practical aspects of these systems. These were not rarified results and commercially impractical but lent themselves to eventual commercial products in the marketplace. The end result - a high performance replacement lamp - will save significant energy while providing a high-quality light source.

  17. Solution-Procesed Small-Molecule OLED Luminaire for Interior Illumination

    SciTech Connect (OSTI)

    Parker, Ian

    2012-02-29

    Prototype lighting panels and luminaires were fabricated using DuPont Displaysâ?? solution-processed small-molecule OLED technology. These lighting panels were based on a spatially-patterned, 3-color design, similar in concept to an OLED display panel, with materials chosen to maximize device efficacy. The majority of the processing steps take place in air (rather than high vacuum). Optimization of device architecture, processing and construction was undertaken, with a final prototype design of 50 cm{sup 2} being fabricated and tested. Performance of these panels reached 35 lm/W at illuminant-A. A unique feature of this technology is the ability to color tune the emission, and color temperatures ranging from 2700 to > 6,500K were attained in the final build. Significant attention was paid to low-cost fabrication techniques.

  18. Long-term Testing Results for the 2008 Installation of LED Luminaires at the I-35 West Bridge in Minneapolis

    SciTech Connect (OSTI)

    Kinzey, Bruce R.; Davis, Robert G.

    2014-09-30

    This document reports the long-term testing results from an extended GATEWAY project that was first reported in “Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting at the I-35W Bridge, in Minneapolis, MN,” August 2009. That original report presented the results of lighting the newly reconstructed I 35W Bridge using LEDs in place of conventional high-pressure sodium (HPS) roadway luminaires, comparing energy use and illuminance levels with a simulated baseline condition. That installation was an early stage implementation of LED lighting and remains one of the oldest installations in continued operation today. This document provides an update of the LED system’s performance since its installation in September 2008.

  19. Top studies

    SciTech Connect (OSTI)

    T. Dorigo

    2003-01-02

    The top quark, discovered in 1994 at the Tevatron, has proven a very interesting particle. Its characteristics allow both to perform stringent tests of electroweak theory, and to search for new physics through a deviation from standard model predictions for several of its peculiar properties. I will review the status of top physics and briefly describe the potential of experiments of the near future.

  20. Top-Down Suppression

    E-Print Network [OSTI]

    Rissman, JA; Zanto, TP

    2015-01-01

    cortex contribute to top-down modulation of visual2003). Neural mechanisms of top-down control during spatialC. D. , & Li, W. (2013). Top-down influences on visual

  1. Single top and top pair production

    E-Print Network [OSTI]

    Nikolaos Kidonakis

    2012-12-12

    I present results for single-top and top-pair production at the LHC and the Tevatron. Higher-order two-loop corrections are used to achieve NNLL resummation, which is then used to derive NNLO soft-gluon corrections. Results are presented for total cross sections, top transverse momentum distributions, and top rapidity distributions. All results are in excellent agreement with data from the LHC and the Tevatron. I also clarify the differences between various methods in top-pair production and their relation to exact NNLO results.

  2. Top physics at CDF

    SciTech Connect (OSTI)

    Julia Thom

    2004-06-24

    Precision studies of top quark properties are a primary goal of the Run II physics program at the Fermilab Tevatron. Marking the first stages of this program, the CDF collaboration presents recent results on top pair production cross section, single top physics and top mass, using between 109 and 200 pb{sup -1} of Run II data.

  3. Tevatron Top Results

    E-Print Network [OSTI]

    Christophe Clement

    2006-05-28

    I present the latest results from the CDF and D0 collaborations on top quark production (single top and top quark pair production) at the Tevatron proton-antiproton collider at sqrt(s) =1.96 TeV, measurements of the top quark decay properties such as the branching ratio B(t -> Wb), the W helicity in t -> Wb decays, and measurements of fundamental parameters such as the top quark charge and mass.

  4. Physics of top

    E-Print Network [OSTI]

    C. -P. Yuan

    2006-04-24

    I will briefly review the physics of top quark at high energy colliders. A new discovery of single-top event at the Fermilab Tevatron is expected. At the CERN Large Hadron Collider, detailed top quark properties can be measured and new physics ideas in which top quark plays a special role can be tested. I will also discuss a few phenomenological methods for analyzing experimental data to study top quark interactions.

  5. Tevatron top physics

    E-Print Network [OSTI]

    Jeannine Wagner-Kuhr; for the CDF; D0 Collaborations

    2009-04-15

    A summary of the most recent results on top quark physics obtained at Fermilab's Tevatron proton-antiproton collider, operating at a centre of mass energy of 1.96 TeV, is presented. Measurements of the top pair and single top quark production cross sections, the investigation of top quark decay properties, the precision measurement of the top quark mass as well as searches for physics beyond the standard model are discussed.

  6. The Dark Top

    E-Print Network [OSTI]

    David Poland; Jesse Thaler

    2008-12-08

    We present a class of composite Higgs models in which the particle that regulates the top quark contribution to the Higgs potential is also a weakly-interacting dark matter candidate. This color-neutral "dark top" is related to the standard model top quark through a large global symmetry. Because the same couplings that control the Higgs potential also determine various dark matter cross sections, the dark top scenario is quite predictive once the dark top mass and various quantum numbers are specified. We construct two concrete examples of dark top models with plausible UV completions and study their dark matter properties and LHC signatures.

  7. Top Physics at ATLAS

    E-Print Network [OSTI]

    Marcello Barisonzi

    2005-08-02

    The Large Hadron Collider LHC is a top quark factory: due to its high design luminosity, LHC will produce about 200 millions of top quarks per year of operation. The large amount of data will allow to study with great precision the properties of the top quark, most notably cross-section, mass and spin. The Top Physics Working Group has been set up at the ATLAS experiment, to evaluate the precision reach of physics measurements in the top sector, and to study the systematic effects of the ATLAS detector on such measurements. This reports give an overview of the main activities of the ATLAS Top Physics Working Group in 2004.

  8. TOP 2014: Experimental Summary

    E-Print Network [OSTI]

    Christian Schwanenberger

    2015-03-05

    A summary of the experimental results of the TOP2014 International Workshop in Cannes, France, is presented. This inspiring conference clearly showed the richness and diversity of top-quark physics research. Results cover a very broad spectrum of analyses involving studies of the strong and electroweak interactions of the top quark, high-precision measurements of intrinsic top-quark properties, developments of new tools in top-quark analyses, observations of new Standard Model processes, the interaction between the top quark and the Higgs boson and sensitive searches for new physics beyond the Standard Model.

  9. Theoretical overview on top pair production and single top production

    E-Print Network [OSTI]

    Stefan Weinzierl

    2012-01-19

    In this talk I will give an overview on theoretical aspects of top quark physics. The focus lies on top pair production and single top production.

  10. Top Quark Properties

    E-Print Network [OSTI]

    Tony M. Liss

    2012-12-03

    I review the latest results on properties of the top quark from the Tevatron and the LHC, including results measured in $t\\bar{t}$ and single-top events on the mass, width, couplings, and spin correlations.

  11. Top Quark Physics

    E-Print Network [OSTI]

    Erich W. Varnes

    2008-10-20

    A review is presented of the current experimental status of the top quark sector of the standard model. The measurements summarized include searches for electroweak single top production, the latest results on the ttbar production cross section, and searches for new physics in top quark production and decay. In addition, the recent measurement of the top quark mass to a precision of 0.7% is highlighted

  12. Top Physics at LHC

    E-Print Network [OSTI]

    M. Vander Donckt; for the CMS; ATLAS Collaborations

    2008-05-21

    The Large Hadron Collider (LHC) will provide a huge amount of top-antitop events, making the LHC a top quark factory, producing 1 tt pair per second at a luminosity of 10^33cm-2s-1. A large top quark sample will be available from the start of LHC and will play an important role in commissioning the CMS and ATLAS detectors. An overview of the top quark measurements during the first data-taking period is given.

  13. Top Threshold Physics

    E-Print Network [OSTI]

    Andre H. Hoang

    2006-04-21

    Running a future Linear Collider at the top pair threshold allows for precise measurements of the mass, the widths and the couplings of the top quark. I give a nontechnical review on recent theoretical developments and the theory status in top threshold physics concerning QCD corrections and top quark finite lifetime and electroweak effects. I also discuss threshold physics in the context of measurements of the top Yukawa coupling from $e^+e^-\\to t\\bar t H$ and of squark pair production.

  14. Top Physics at CDF

    SciTech Connect (OSTI)

    Moon, Chang-Seong

    2011-06-01

    We present the recent results of top-quark physics using up to 6 fb{sup -1} of p{bar p} collisions at a center of mass energy of {radical}s = 1.96 TeV analyzed by the CDF collaboration. Thanks to this large data sample, precision top quark measurements are now a reality at the Tevatron. Further, several new physics signals could appear in this large dataset. We will present the latest measurements of top quark intrinsic properties as well as direct searches for new physics in the top sector.

  15. Top Physics at CDF

    E-Print Network [OSTI]

    Chang-Seong Moon

    2011-07-01

    We present the recent results of top-quark physics using up to 6 fb$^{-1}$ of $p \\bar p$ collisions at a center of mass energy of $\\sqrt s$ = 1.96 TeV analyzed by the CDF collaboration. Thanks to this large data sample, precision top quark measurements are now a reality at the Tevatron. Further, several new physics signals could appear in this large dataset. We will present the latest measurements of top quark intrinsic properties as well as direct searches for new physics in the top sector.

  16. Top quark in theory

    E-Print Network [OSTI]

    Eric Laenen

    2008-09-18

    I review how the top quark is embedded in the Standard Model and some its proposed extensions, and how it manifests itself in various hadron collider signals.

  17. Top Mass and Properties

    E-Print Network [OSTI]

    Yen-Chu Chen

    2008-05-15

    The top quark was discovered in 1995. The top quark mass is now well measured at the Tevatron, with uncertainty getting below 1% of the top mass. The world average from last year was 170.9 $\\pm$ 1.8 GeV/$c^2$. The new CDF measurement is 172 $\\pm$ 1.2 (stat) $\\pm$ 1.5 (sys) GeV/$c^2$, and D0 will soon present a new measurement. The top quark mass is an important parameter in the Standard Model, and should be measured as precisely as possible. To learn more about the top quark observed and study possible new physics, other properties also should be measured. At the Tevatron, the charge of the top quark can be measured directly. Examples of other properties studied and reported in this presentation are W helicity, top decay branching ratio to b ($R_b$), searches for $t \\to H b$ and for flavor changing neutral current (FCNC). The results are all consistent with the Standard Model within current statistics. With significantly more data being collected at the Tevatron, precision measurements of the top properties are just starting.

  18. Top physics at CDF

    SciTech Connect (OSTI)

    Hughes, R.E. [Univ. of Rochester, NY (United States)

    1997-01-01

    We report on top physics results using a 100 pb{sup -1} data sample of p{bar p} collisions at {radical}s = 1.8 TeV collected with the Collider Detector at Fermilab (CDF). We have identified top signals in a variety of decay channels, and used these channels to extract a measurement of the top mass and production cross section. A subset of the data (67 pb{sup -1}) is used to determine M{sub top} = 176 {+-} 8(stat) {+-} 10(syst) and {sigma}(tt) = 7.6 {sub -2.0}{sup +2.4} pb. We present studies of the kinematics of t{bar t} events and extract the first direct measurement of V{sub tb}. Finally, we indicate prospects for future study of top physics at the Tevatron.

  19. Top Quark Properties

    E-Print Network [OSTI]

    Yvonne Peters; for the Atlas Collaboration; CDF Collaboration; CMS Collaboration; D0 Collaboration

    2011-12-02

    Since its discovery in 1995 by the CDF and D0 collaborations at the Fermilab Tevatron collider, the top quark has undergone intensive studies. Besides the Tevatron experiments, with the start of the LHC in 2010 a top quark factory started its operation. It is now possible to measure top quark properties simultaneously at four different experiments, namely ATLAS and CMS at LHC and CDF and D0 at Tevatron. Having collected thousands of top quarks each, several top quark properties have been measured precisely, while others are being measured for the first time. In this article, recent measurements of top quark properties from ATLAS, CDF, CMS and D0 are presented, using up to 5.4 fb-1 of integrated luminosity at the Tevatron and 1.1 fb^-1 at the LHC. In particular, measurements of the top quark mass, mass difference, forward backward charge asymmetry, tt - spin correlations, the ratio of branching fractions, W helicity, anomalous couplings, color flow and the search for flavor changing neutral currents are discussed.

  20. Differential top pair cross section and top anti-top plus jets Physics

    E-Print Network [OSTI]

    Malgorzata Worek

    2013-02-14

    A brief summary of the current status of the next-to-leading order QCD corrections to top quark pair production and the associated production of top anti-top with jet(s) in different configurations, i.e. with one jet, two jets and another top anti-top pair, is presented.

  1. Top Needs of Occupy Sites

    E-Print Network [OSTI]

    Baldwin, J.R.

    2012-01-01

    Individuals Occupy Sourcing Top Needs of Occupy Sites Art byand Social Media in Colombia Top Needs of Occupy Sites J.R.Baldwin collects the top needs of Occupy sites across the

  2. Top Jets at the LHC

    E-Print Network [OSTI]

    Almeida, L.G.

    2009-01-01

    Top Jets at the LHC Leandro G. Almeida, Seung J. Lee, GiladWIS/17/08-SEPT-DPP Top Jets at the LHC Leandro G. Almeidareconstructed as a single jet, a “top-jet”. The most basic “

  3. Top Quark Measurements in CMS

    E-Print Network [OSTI]

    Efe Yazgan; for the CMS Collaboration

    2014-09-12

    Measurements involving top quarks provide important tests of QCD. A selected set of top quark measurements in CMS including the strong coupling constant, top quark pole mass, constraints on parton distribution functions, top quark pair differential cross sections, ttbar+0 and >0 jet events, top quark mass studied using various kinematic variables in different phase-space regions, and alternative top quark mass measurements is presented. The evolution of expected uncertainties in future LHC runs for the standard and alternative top quark mass measurements is also presented.

  4. Physics with boosted top quarks

    E-Print Network [OSTI]

    Elin Bergeaas Kuutmann

    2014-08-29

    The production at the LHC of boosted top quarks (top quarks with a transverse momentum that greatly exceeds their rest mass) is a promising process to search for phenomena beyond the Standard Model. In this contribution several examples are discussed of new techniques to reconstruct and identify (tag) the collimated decay topology of the boosted hadronic decays of top quarks. Boosted top reconstruction techniques have been utilized in searches for new physical phenomena. An overview is given of searches by ATLAS, CDF and CMS for heavy new particles decaying into a top and an anti-top quark, vector-like quarks and supersymmetric partners to the top quark.

  5. ATLAS results on top properties

    E-Print Network [OSTI]

    F. Derue

    2014-08-26

    Recent measurements of top quark properties using $t{\\bar t}$ events produced in proton-proton collisions at the Large Hadron Collider with centre of mass energies of 7 and 8 TeV and detected by the ATLAS experiment are presented. These results include top quark mass, the top and anti-top mass difference, the electric charge, the top quark polarization and spin correlation, the $t{\\bar t}$ charge asymmetry and the search for flavour changing neutral currents.

  6. Seismic mass Top electrode

    E-Print Network [OSTI]

    Kraft, Michael

    assembly process. For the measurements of the physical dimensions of the seismic mass a micrometer was usedSeismic mass Top electrode Bottom electrode x C1 C2 Chapter 4: The Micromachined Sensing Element supplied by Druck, Ltd., Groby, Leics. The manufacturing process at Druck was still in its experimental

  7. Early Top Physics with ATLAS

    E-Print Network [OSTI]

    J. Schieck

    2009-01-12

    The ATLAS detector is one of the two multi-purpose experiments located at the Large Hadron Collider (LHC) at CERN and is expected to collect first collision data in summer 2009. Due to the large top-quark production cross-section the LHC will function as a top-quark factory allowing to measure top-quark properties even at initial luminosities. We present some recently-performed studies, focussing on measurements of the top pair and single top production cross-sections with the first fb-1 of data. The potential for the measurement of other top-quark properties like the mass will be also briefly discussed.

  8. Top Management Involvement in the Adoption of Energy Efficiency Projects

    E-Print Network [OSTI]

    Blass, Vered; Corbett, Charles J.; Delmas, Magali A; Muthulingam, Suresh

    2011-01-01

    of Recommendations Top Management * Energy Costs/Sales TopTop Management Top Management * Energy Costs/Sales TopTop Management Top Management * Energy Costs/Sales Top

  9. Top Jets at the LHC

    E-Print Network [OSTI]

    Almeida, L.G.

    2009-01-01

    Top Jets at the LHC Leandro G. Almeida, Seung J. Lee, GiladSB-08-37; WIS/17/08-SEPT-DPP Top Jets at the LHC Leandro G.p T hadronically-decaying top quarks at the Large Hadron

  10. Top Physics at the LHC

    E-Print Network [OSTI]

    P. de Jong

    2009-02-27

    The LHC will be a top quark factory. In this note, the central role of the top quark for LHC physics will be discussed, and an overview will be given of the studies of top quark properties in preparation, with an emphasis on the systematic uncertainties that will dominate most measurements.

  11. Top-ophilia Chris Quigg

    E-Print Network [OSTI]

    Quigg, Chris

    Top-ophilia Chris Quigg Theoretical Physics Department, Fermi National Accelerator Laboratory P.O. Box 500, Batavia, Illinois 60510 USA January 11, 2008 1 Room for the Top Almost from the moment, it became clear that the top quark must exist. Exactly at what mass, we couldn't say, but we knew just how

  12. Top physics results at CDF

    SciTech Connect (OSTI)

    Vickey, Trevor; /Illinois U., Urbana

    2005-05-01

    The most recent results on top quark physics at CDF are reported. Measurements of cross-section and mass are presented, and the status of single top quark production searches are discussed. The results obtained from probing various top quark properties are also presented.

  13. Top Quark Pair Production in Early CMS Data

    E-Print Network [OSTI]

    Kao, Shih-Chuan

    2011-01-01

    23 2.13 top decay . . . . . . . . . . . . .of the Top Quark . . . . . . . . . . . . . . . . . . . . .20 Top Production in Hadron

  14. Top quark physics at CDF

    E-Print Network [OSTI]

    Karolos Potamianos

    2011-12-01

    We present the recent results of top-quark physics using up to 6 fb$^{-1}$ of $p\\bar{p}$ collisions analyzed by the CDF collaboration. The large number of top quark events analyzed, of the order of several thousands, allows stringent checks of the standard model predictions. Also, the top quark is widely believed to be a window to new physics. We present the latest measurements of top quark intrinsic properties as well as direct searches for new physics in the top sector.

  15. Top quark pair production and top quark properties at CDF

    E-Print Network [OSTI]

    Chang-Seong Moon

    2014-11-01

    We present the most recent measurements of top quark pairs production and top quark properties in proton-antiproton collisions with center-of-mass energy of 1.96 TeV using CDF II detector at the Tevatron. The combination of top pair production cross section measurements and the direct measurement of top quark width are reported. The test of Standard Model predictions for top quark decaying into $b$-quarks, performed by measuring the ratio $R$ between the top quark branching fraction to $b$-quark and the branching fraction to any type of down quark is shown. The extraction of the CKM matrix element $|V_{tb}|$ from the ratio $R$ is discussed. We also present the latest measurements on the forward-backward asymmetry ($A_{FB}$) in top anti-top quark production. With the full CDF Run II data set, the measurements are performed in top anti-top decaying to final states that contain one or two charged leptons (electrons or muons). In addition, we combine the results of the leptonic forward-backward asymmetry in $t\\bar t$ system between the two final states. All the results show deviations from the next-to-leading order (NLO) standard model (SM) calculation.

  16. PAGE Cover: Top Photo

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy Bills andOrder 422.1, CONDUCT P - . . - - 4 v - r REQUESTCostPAGE Cover: Top

  17. Top-Higgs and Top-pion phenomenology in the Top Triangle Moose model

    E-Print Network [OSTI]

    R. Sekhar Chivukula; Baradhwaj Coleppa; Heather E. Logan; Adam Martin; Elizabeth H. Simmons

    2011-01-31

    We discuss the deconstructed version of a topcolor-assisted technicolor model wherein the mechanism of top quark mass generation is separated from the rest of electroweak symmetry breaking. The minimal deconstructed version of this scenario is a "triangle moose" model, where the top quark gets its mass from coupling to a top-Higgs field, while the gauge boson masses are generated from a Higgsless sector. The spectrum of the model includes scalar (top-Higgs) and pseudoscalar (top-pion) states. In this paper, we study the properties of these particles, discuss their production mechanisms and decay modes, and suggest how best to search for them at the LHC.

  18. Materials Technologies: Goals, Strategies, and Top Accomplishments...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Materials Technologies: Goals, Strategies, and Top Accomplishments (Brochure), Vehicle Technologies Program (VTP) Materials Technologies: Goals, Strategies, and Top Accomplishments...

  19. Top-antitop and Top-top Resonances in the Dilepton Channel at the CERN LHC

    E-Print Network [OSTI]

    Yang Bai; Zhenyu Han

    2009-04-12

    We perform a model-independent study for top-antitop and top-top resonances in the dilepton channel at the Large Hadtron Collider. In this channel, we can solve the kinematic system to obtain the momenta of all particles including the two neutrinos, and hence the resonance mass and spin. For discovering top-antitop resonances, the dilepton channel is competitive to the semileptonic channel because of the good resolution of lepton momentum measurement and small standard model backgrounds. Moreover, the charges of the two leptons can be identified, which makes the dilepton channel advantageous for discovering top-top resonances and for distinguishing resonance spins. We discuss and provide resolutions for difficulties associated with heavy resonances and highly boosted top quarks.

  20. Top quark mass measurements

    SciTech Connect (OSTI)

    L. Cerrito

    2004-07-16

    Preliminary results on the measurement of the top quark mass at the Tevatron Collider are presented. In the dilepton decay channel, the CDF Collaboration measures m{sub t} = 175.0{sub -16.9}{sup +17.4}(stat.){+-}8.4(syst.) GeV/c{sup 2}, using a sample of {approx} 126 pb{sup -1} of proton-antiproton collision data at {radical}s = 1.96 TeV (Run II). In the lepton plus jets channel, the CDF Collaboration measures 177.5{sub -9.4}{sup +12.7}(stat.) {+-} 7.1(syst.) GeV/c{sup 2}, using a sample of {approx} 102 pb{sup -1} at {radical}s = 1.96 TeV. The D0 Collaboration has newly applied a likelihood technique to improve the analysis of {approx} 125 pb{sup -1} of proton-antiproton collisions at {radical}s = 1.8 TeV (Run I), with the result: m{sub t} = 180.1 {+-} 3.6(stat.) {+-}3.9(syst.) GeV/c{sup 2}. The latter is combined with all the measurements based on the data collected in Run I to yield the most recent and comprehensive experimental determination of the top quark mass: m{sub t} = 178.0 {+-} 2.7(stat.) {+-} 3.3(syst.) GeV/c{sup 2}.

  1. Top physics results from CDF

    SciTech Connect (OSTI)

    Gomez, Gervasio; /Cantabria Inst. of Phys.

    2005-05-01

    The top quark is by far the most massive fundamental particle observed so far, and the study of its properties is interesting for several reasons ranging from its possible special role in electroweak symmetry breaking to its sensitivity to physics beyond the Standard Model. They present recent top physics results from CDF based on 160-320 pb{sup -1} of p{bar p} collision data at {radical}s = 1.96 TeV. The t{bar t} cross section and the top mass have been measured in different decay channels and using different methods. they have searched for evidence of single top production, setting upper limits on its production rate. Other results shown in this conference include studies of the polarization of W bosons from top decays, a search for charged Higgs decaying from top, and a search for additional heavy t' quarks.

  2. Boosted top: experimental tools overview

    E-Print Network [OSTI]

    Emanuele Usai; for the ATLAS; CMS Collaborations

    2015-01-05

    An overview of tools and methods for the reconstruction of high-boost top quark decays at the LHC is given in this report. The focus is on hadronic decays, in particular an overview of the current status of top quark taggers in physics analyses is presented. The most widely used jet substructure techniques, normally used in combination with top quark taggers, are reviewed. Special techniques to treat pileup in large cone jets are described, along with a comparison of the performance of several boosted top quark reconstruction techniques.

  3. Keynote: Some remarks on top

    E-Print Network [OSTI]

    Werner Bernreuther

    2010-08-23

    A few key issues of present and future explorations of the physics of top quarks at the Tevatron and LHC are discussed.

  4. Top Quark Properties from Top Pair Events and Decays

    E-Print Network [OSTI]

    Andrew G. Ivanov; for the CDF; Dzero Collaborations

    2008-10-19

    Over a decade since the discovery of the top quark we are still trying to unravel mysteries of the heaviest observed particle and learn more about its nature. The continuously accumulating statistics of CDF and Dzero data provide the means for measuring top quark properties with ever greater precision and the opportunity to search for signs of new physics that could be manifested through subtle deviations from the standard model in the production and decays of top quarks. In the following we present a slice of the rich program in top quark physics at the Fermilab Tevatron: measurements of the properties of top quark decays and searches for unusual phenomena in events with pair produced tops. In particular, we discuss the most recent and precise CDF and Dzero measurements of the transverse polarization of W bosons from top decays, branching ratios and searches for flavor-changing neutral current decays, decays into charged Higgs and invisible decays. These analyses correspond to integrated luminosities ranging from 0.9 to 2.7 inv. fb.

  5. Status of the top quark: Top production cross section and top properties

    SciTech Connect (OSTI)

    Boisvert, V.; /Rochester U.

    2006-08-01

    This report describes the latest cross section and property measurements associated with the top quark at the Tevatron Run II. The largest data sample used is 760 pb{sup -1} of integrated luminosity. Due to its large mass, the top quark might be involved in the process of electroweak symmetry breaking, making it a useful probe for signs of new physics.

  6. Googling the Top Two: Information Search in California’s Top Two Primary

    E-Print Network [OSTI]

    Sinclair, Betsy; Wray, Michael

    2015-01-01

    more as a consequence of the top two primary. ReferencesAssessing California’s Top-Two Primary and RedistrictingGoogling the Top Two: Information Search in California’s Top

  7. SW New Mexico Oil Well Formation Tops

    SciTech Connect (OSTI)

    Shari Kelley

    2015-10-21

    Rock formation top picks from oil wells from southwestern New Mexico from scout cards and other sources. There are differing formation tops interpretations for some wells, so for those wells duplicate formation top data are presented in this file.

  8. The Top Two: Too Soon to Tell

    E-Print Network [OSTI]

    Valentine, Zabrae

    2015-01-01

    The Top Two: Too Soon to Tell Zabrae Valentine Until just aRedistricting Commission, no Top Two, no loosening of thefirm conclusions until the Top Two has had time to take

  9. Top quark physics expectations at the LHC

    E-Print Network [OSTI]

    Gaponenko, Andrei; ATLAS Collaboration; CMS Collaboration

    2008-01-01

    Physics Analysis Summary TOP 08 005. ATLAS Collaboration,Note 2006/013. E. W. Varnes, Top Physics plenary talk, thismass in the ATLAS cuts based top mass analysis with 1fb ?1

  10. Introduction: The California Top Two Primary

    E-Print Network [OSTI]

    Sinclair, Betsy

    2015-01-01

    with the adoption of the top two primary, and we lookIntroduction: The California Top Two Primary Betsy Sinclairfrequently asserted that the “top-two” would produce more

  11. The Top Two Runoff – An Assessment

    E-Print Network [OSTI]

    Quinn, Tony

    2015-01-01

    The Top Two Runoff – An Assessment Tony Quinn The mosts new open primary and Top Two general election is that allvery real impact of the new Top Two runoff – legislators who

  12. Dark decay of Top quark

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kong, Kyoungchui [Kansas; Lee, Hye-Sung [W&M, JLAB; Park, Myeonhun [Tokyo

    2014-04-01

    We suggest top quark decays as a venue to search for light dark force carriers. Top quark is the heaviest particle in the standard model whose decays are relatively poorly measured, allowing sufficient room for exotic decay modes from new physics. A very light (GeV scale) dark gauge boson (Z') is a recently highlighted hypothetical particle that can address some astrophysical anomalies as well as the 3.6 ? deviation in the muon g-2 measurement. We present and study a possible scenario that top quark decays as t ? b W + Z's. This is the same as the dominant top quark decay (t ? b W) accompanied by one or multiple dark force carriers. The Z' can be easily boosted, and it can decay into highly collimated leptons (lepton-jet) with large branching ratio. We discuss the implications for the Large Hadron Collider experiments including the analysis based on the lepton-jets.

  13. The Top Mathematics Florin Diacu

    E-Print Network [OSTI]

    Diacu, Florin

    top award, the Fields Medal, bears the name of a Canadian. In 1896, the Swedish inventor Al- fred, the inventor of dynamite, loved chemistry and physics. Literature was his great passion; in spite of a busy

  14. Top-quark production measurements

    E-Print Network [OSTI]

    Markus Cristinziani

    2015-11-13

    Recent measurements of top-quark production at hadron colliders are reviewed. The inclusive top-quark pair production is determined at four centre-of-mass energies at Tevatron and LHC with experimental uncertainties that are close to the uncertainties in theoretical calculations at next-to-next-to-leading order in QCD. Several differential measurements are performed and compared to simulation. Production of single top quarks is studied in the three different production channels. Top-quark pair production with neutral and charged vector bosons has been observed by the LHC experiments. Finally, production of additional heavy flavour quark pairs ($b\\bar{b}$, $t\\bar{t}$) is studied or searched for.

  15. Unvented, Conditioned Attics - Building America Top Innovation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Unvented, Conditioned Attics - Building America Top Innovation Unvented, Conditioned Attics - Building America Top Innovation This photo shows an attic that is conditioned...

  16. LANL named 2010 top corporate volunteer organization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2010 top corporate volunteer organization LANL named 2010 top corporate volunteer organization The Laboratory ranked ahead of dozens of other qualifying companies with 10,000 or...

  17. Basement Insulation Systems - Building America Top Innovation...

    Office of Environmental Management (EM)

    Basement Insulation Systems - Building America Top Innovation Basement Insulation Systems - Building America Top Innovation This photo shows a framed basement wall with insulation...

  18. Uncovering the single top: observation of electroweak top quark production

    SciTech Connect (OSTI)

    Benitez, Jorge Armando; /Michigan State U.

    2009-08-01

    The top quark is generally produced in quark and anti-quark pairs. However, the Standard Model also predicts the production of only one top quark which is mediated by the electroweak interaction, known as 'Single Top'. Single Top quark production is important because it provides a unique and direct way to measure the CKM matrix element V{sub tb}, and can be used to explore physics possibilities beyond the Standard Model predictions. This dissertation presents the results of the observation of Single Top using 2.3 fb{sup -1} of Data collected with the D0 detector at the Fermilab Tevatron collider. The analysis includes the Single Top muon+jets and electron+jets final states and employs Boosted Decision Tress as a method to separate the signal from the background. The resulting Single Top cross section measurement is: (1) {sigma}(p{bar p} {yields} tb + X, tqb + X) = 3.74{sub -0.74}{sup +0.95} pb, where the errors include both statistical and systematic uncertainties. The probability to measure a cross section at this value or higher in the absence of signal is p = 1.9 x 10{sup -6}. This corresponds to a standard deviation Gaussian equivalence of 4.6. When combining this result with two other analysis methods, the resulting cross section measurement is: (2) {sigma}(p{bar p} {yields} tb + X, tqb + X) = 3.94 {+-} 0.88 pb, and the corresponding measurement significance is 5.0 standard deviations.

  19. Tomorrow's cities -the lamp-posts watching every move1 by Jane Wakefield for BBC News2

    E-Print Network [OSTI]

    South Bohemia, University of

    traffic speeds. According to European Commission statistics, children under11 12 make more journeys the city council is looking to upgrade its23 streetlights to more energy-efficient LED lights - likely and shows a variety of data from air pollution,33 crime statistics, weather and even a happiness index

  20. Exploration of versatile clamping mechanism and brace system for table attachment to lamp posts and poles in urban settings

    E-Print Network [OSTI]

    Macomber, Bryan A

    2012-01-01

    The goal of this thesis is to explore potential designs for a table that attaches to poles and street signs outside food trucks. A convenient placement of tables could greatly facilitate and improve the eating experience ...

  1. Dark decay of Top quark

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kong, Kyoungchui; Lee, Hye-Sung; Park, Myeonhun

    We suggest top quark decays as a venue to search for light dark force carriers. Top quark is the heaviest particle in the standard model whose decays are relatively poorly measured, allowing sufficient room for exotic decay modes from new physics. A very light (GeV scale) dark gauge boson (Z') is a recently highlighted hypothetical particle that can address some astrophysical anomalies as well as the 3.6 ? deviation in the muon g-2 measurement. We present and study a possible scenario that top quark decays as t ? b W + Z's. This is the same as the dominant topmore »quark decay (t ? b W) accompanied by one or multiple dark force carriers. The Z' can be easily boosted, and it can decay into highly collimated leptons (lepton-jet) with large branching ratio. We discuss the implications for the Large Hadron Collider experiments including the analysis based on the lepton-jets.« less

  2. Top Quark Production at the Tevatron Collider

    E-Print Network [OSTI]

    Liang Li

    2011-07-21

    Top quark physics has been a rich testing ground for the standard model since the top quark discovery in 1995. The large mass of top quark suggests that it could play a special role in searches for new phenomena. In this paper I provide an overview of recent top quark production cross section measurements from both CDF and D0 collaborations and also some new physics searches done in the top quark sector.

  3. FSP Index Top Performing Schools http://www.academicanalytics.com/TopSchools/TopSchools.aspx 1 of 3 2/12/2008 5:13 PM

    E-Print Network [OSTI]

    Tesanovic, Zlatko

    FSP Index Top Performing Schools http://www.academicanalytics.com/TopSchools/TopSchools.aspx 1 of 3 2/12/2008 5:13 PM Tuesday, February 12, 2008 | 5:13 PM EST FSP Index Top Performing Schools 2006 University of Iowa Brown University #12;FSP Index Top Performing Schools http://www.academicanalytics.com/TopSchools/TopSchools

  4. Top Quark: discovery, present and future Galtieri, The Top Quark, PDG 50th

    E-Print Network [OSTI]

    Galtieri, Lina

    1 Top Quark: discovery, present and future Galtieri, The Top Quark, PDG 50th Anniversary. September 23-2006 #12;Chasing the Top Quark 2 Gell-Mann, Zweig uds quarks postulated ('64) GIM mechanism at FNAL 1984 PDG partial listing top should exist Searches at Tristan, PETRA, SPPS, SLC : top not found

  5. Top 100 historical figures of Wikipedia 1 Top 100 historical figures of Wikipedia

    E-Print Network [OSTI]

    Shepelyansky, Dima

    Top 100 historical figures of Wikipedia 1 Top 100 historical figures of Wikipedia The top 100 papers. In the statistical respects this top 100 list is of differs from the historical, cultural grounds of those approaches they have overlap of about 43 percent with the top 100 list of Hart

  6. Top-Working Pecan Trees. 

    E-Print Network [OSTI]

    Kyle, E. J.

    1916-01-01

    - ducing satisfactory crops of nuts. 2. When plantings of named varieties have not proven a com- mercial success in certain sections; 3. When a person who understands propagating the pecan desires to plant seed where the trees are to stand and top...

  7. Top-Quark Physics Results From LHC

    E-Print Network [OSTI]

    Luca Fiorini

    2012-01-30

    The top-quark is a fundamental element of the physics program at the Large Hadron Collider (LHC). We review the current status of the top-quark measurements performed by ATLAS and CMS experiments in pp collisions at sqrt(s)=7 TeV by presenting the recent results of the top-quark production rates, top mass measurements and additional top quark properties. We will also describe the recent searches for physics beyond the Standard Model in the top-quark sector.

  8. Recent Top Properties Measurements at CDF

    E-Print Network [OSTI]

    Giorgio Chiarelli

    2014-10-09

    We present the most recent CDF results in the measurements of the decay and production vertex of the top-quark. New results on forward-backward asymmetry in top-antitop events are presented. Also, recent measurements of the branching fractions of top-quark are discussed. Finally, measurements in single top events, where top-quark is produced through electroweak processes, are presented. Despite the much larger number of top events collected at the LHC, due to the symmetric initial state and the better signal-to-background ratio in specific channels, some results will be lasting heritage of the Tevatron.

  9. Top quark studies at hadron colliders

    SciTech Connect (OSTI)

    Sinervo, P.K. [Univ. of Toronto, Ontario (Canada)

    1997-01-01

    The techniques used to study top quarks at hadron colliders are presented. The analyses that discovered the top quark are described, with emphasis on the techniques used to tag b quark jets in candidate events. The most recent measurements of top quark properties by the CDF and DO Collaborations are reviewed, including the top quark cross section, mass, branching fractions, and production properties. Future top quark studies at hadron colliders are discussed, and predictions for event yields and uncertainties in the measurements of top quark properties are presented.

  10. Top partner probes of extended Higgs sectors

    E-Print Network [OSTI]

    Kearney, John

    Natural theories of the weak scale often include fermionic partners of the top quark. If the electroweak symmetry breaking sector contains scalars beyond a single Higgs doublet, then top partners can have sizable branching ...

  11. Top 10 FAQs | Department of Energy

    Energy Savers [EERE]

    Top 10 FAQs Top 10 FAQs Is my project eligible for a DOE loan guarantee? The Department considers project applications that have been submitted in compliance with an open...

  12. Top quark physics at the LHC

    E-Print Network [OSTI]

    Werner Bernreuther

    2008-05-09

    The physics perspectives of the production and decay of single top quarks and top quark pairs at the CERN Large Hadron Collider (LHC) are reviewed from a phenomenological point of view.

  13. Top quark physics expectations at the LHC

    E-Print Network [OSTI]

    Gaponenko, Andrei; ATLAS Collaboration; CMS Collaboration

    2008-01-01

    Science, O?ce of High Energy Physics, of the U.S. Department05CH11231. References CMS Physics Analysis Summary TOP 08Note 2006/013. E. W. Varnes, Top Physics plenary talk, this

  14. Theory of top quark production and decay

    SciTech Connect (OSTI)

    Kuehn, J.H. [Universitaet Karlsruhe (Germany)

    1997-01-01

    Direct and indirect information on the top quark mass and its decay modes is reviewed. The theory of top production in hadron- and electron-positron-colliders is presented.

  15. Top Quark Production at the LHC

    E-Print Network [OSTI]

    Francesco Spanò; for the ATLAS; CMS collaborations

    2011-12-16

    Top quark production in proton proton collisions at the Large Hadron Collider (LHC) is reviewed using data collected by the ATLAS and CMS detectors. Most recent results on searches for new physics related to top quark production mechanism are included.

  16. Single Top production at CMS

    E-Print Network [OSTI]

    Thomas Speer

    2011-10-11

    A first measurement of the cross section of single top quark production in the t channel in pp collision at sqrt(s)=7 TeV is presented. The measurement is performed on a data sample corresponding to an integrated luminosity of 35.9 pb^-1 recorded at the LHC with the CMS detector. Leptonic decay channels with an electron or a muon in the final state are considered. After a selection optimized for the t-channel mode, two different and complementary analyses have been performed. Both analyses confirm the Tevatron's observation of single top, and their combination measures a cross section of sigma = 83.6 +/- 29.8(stat.+syst.) +/- 3.3 (lumi.) pb, which is consistent with the Standard Model prediction.

  17. Top decays in extended models

    SciTech Connect (OSTI)

    Gaitan, R.; Miranda, O. G.; Cabral-Rosetti, L. G.

    2009-04-20

    Top quark decays are interesting as a mean to test the Standard Model (SM) predictions. The Cabbibo-Kobayashi-Maskawa (CKM)-suppressed process t{yields}cWW, and the rare decays t{yields}cZ, t{yields}H{sup 0}+c, and t{yields}c{gamma} an excellent window to probe the predictions of theories beyond the SM. We evaluate the flavor changing neutral currents (FCNC) decay t{yields}H{sup 0}+c in the context of Alternative Left-Right symmetric Models (ALRM) with extra isosinglet heavy fermions; the FCNC decays may place at tree level and are only supressed by the mixing between ordinary top and charm quarks. We also comment on the decay process t{yields}c+{gamma}, which involves radiative corrections.

  18. Materials Technologies: Goals, Strategies, and Top Accomplishments

    SciTech Connect (OSTI)

    2010-08-02

    Fact sheet describing the goals, strategies, and top accomplishments of the Materials Technologies subprogram of the Vehicle Technologies Program.

  19. Top quark Physics at the Tevatron

    E-Print Network [OSTI]

    Yvonne Peters; for the CDF; D0 Collaborations

    2012-01-06

    When the heaviest elementary particle known today, the top quark, was discovered in 1995 by the CDF and D0 collaborations at the Fermilab Tevatron collider, a large program to study this particle in details has started. In this article, an overview of the status of top quark physics at the Tevatron is presented. In particular, recent results on top quark production, properties and searches using top quarks are discussed.

  20. Top Tips for Accessing Oxford's Information Resources

    E-Print Network [OSTI]

    Oxford, University of

    Top Tips for Accessing Oxford's Information Resources And How Brasenose College Library Fits In #12, electronic journals and books Top Tip 1: Attend the Bodleian induction sessions for your subject #12;Oxford ­ departmental, faculty, college Top Tip 2: Explore smaller libraries ­ www

  1. Top quark measurement in the CDF

    E-Print Network [OSTI]

    Hyun Su Lee; for the CDF Collaboration

    2009-05-28

    We present recent top physics results in the CDF including updates of top mass, \\ttbar cross section, single top search, forward-backward asymmetry, and the differential cross section of \\ttbar. Most of measurements utilize close to the integrated luminosity of 3 fb$^{-1}$.

  2. Top quark physics expectations at the LHC

    E-Print Network [OSTI]

    Andrei Gaponenko; for the ATLAS Collaboration; for the CMS Collaboration

    2008-10-22

    The top quark will be produced copiously at the LHC. This will make both detailed physics studies and the use of top quark decays for detector calibration possible. This talk reviews plans and prospects for top physics activities in the ATLAS and CMS experiments.

  3. Top Tips for Accessing Oxford's Information Resources

    E-Print Network [OSTI]

    Oxford, University of

    Top Tips for Accessing Oxford's Information Resources And How Brasenose College Library Fits In #12, electronic journals and books Top Tip 1: Attend the induction session in your departmental library #12;Oxford ­ departmental, faculty, college Top Tip 2: Explore smaller libraries ­ www

  4. Top Mass Measurements at the Tevatron

    E-Print Network [OSTI]

    M. H. L. S. Wang

    2009-04-02

    We present the latest measurements of the top quark mass from the Tevatron. The different top decay channels and measurement techniques used for these results are also described. The world average of the top quark mass based on some of these new results combined with previous results is mtop=172.6+-1.4 GeV.

  5. Evaluation of repeated electrowetting on three different fluoropolymer top coatings

    E-Print Network [OSTI]

    Koo, B; Kim, CJ

    2013-01-01

    across the fluoropolymer top coating (calculated) divided bydifferent fluoropolymer top coatings Bonhye Koo 1,3 andpopular fluoropolymer top coatings: Teflon, FluoroPel and

  6. Building America Top Innovations Hall of Fame Profile - Building...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Top Innovations Hall of Fame Profile - Building America's Top Innovations Propel the Home Building Industry toward Higher Performance Building America Top...

  7. Top Management Involvement in the Adoption of Energy Efficiency Projects

    E-Print Network [OSTI]

    Blass, Vered; Corbett, Charles J.; Delmas, Magali A; Muthulingam, Suresh

    2011-01-01

    S. J. 1993. Selling Issues to Top Management. Academy ofD. 1992. Diversification Posture and Top Management Teamas A Reflection of Its Top Managers. Academy of Management

  8. Building America Top Innovations Hall of Fame Profile - Building...

    Energy Savers [EERE]

    Top Innovations Hall of Fame Profile - Building America's Top Innovations Propel the Home Building Industry toward Higher Performance Building America Top Innovations Hall of Fame...

  9. The "top player problem" Here are two solutions of the "top player" problem,

    E-Print Network [OSTI]

    Sussmann, Hector

    The "top player problem" Here are two solutions of the "top player" problem, IMPORTANT REMARK that every tournament has a top player. For this purpose, it suffices to prove that (*) For every natural number n, and every tournament t with n play- ers, t has a top player. (If we use T(t) for "t

  10. Top physics at LHC with ttbar events

    E-Print Network [OSTI]

    F. Hubaut

    2006-05-10

    The new CERN proton-proton collider, the LHC, is about to start in 2007 its data taking. Millions of top quarks will be available out of these data, allowing to perform a wide range of precision measurements and searches for new physics. An overview of the planned top physics program accessible with ttbar events is given for the ATLAS and CMS experiments. A particular emphasis is put on the precision measurements of the top mass, top polarization and searches for new physics in top production and decay.

  11. Top Quark Physics at the Tevatron

    E-Print Network [OSTI]

    Frederic Deliot; Douglas Glenzinski

    2011-10-10

    We review the field of top-quark physics with an emphasis on experimental techniques. The role of the top quark in the Standard Model of particle physics is summarized and the basic phenomenology of top-quark production and decay is introduced. We discuss how contributions from physics beyond the Standard Model could affect top-quark properties or event samples. The many measurements made at the Fermilab Tevatron, which test the Standard Model predictions or probe for direct evidence of new physics using the top-quark event samples, are reviewed here.

  12. Top Quark Forward-Backward Asymmetry

    E-Print Network [OSTI]

    Kingman Cheung; Wai-Yee Keung; Tzu-Chiang Yuan

    2009-11-17

    The recent forward-backward asymmetry recorded by the CDF Collaboration for the top and anti-top quark pair production indicates more than $2\\sigma$ deviation from the Standard Model prediction, while its total production cross section remains consistent. We propose a $W'$ boson that couples to down and top quarks. We identify the parameter space that can give rise a large enough forward-backward asymmetry without producing too many top and anti-top quark pairs. Other models presented erstwhile in the literature that can produce such effects are also discussed.

  13. Top Quark Studies at D0

    E-Print Network [OSTI]

    R. Y. Peters

    2014-08-10

    Years after its discovery in 1995 by CDF and D0, the top quark still undergoes intense investigations at the Tevatron. Using up to the full Run~II data sample, new measurements of top quark production and properties by the D0 Collaboration are presented. In particular, the first observation of single top quark s-channel production, the measurement of differential ttbar distributions, forward-backward ttbar asymmetry, a new measurement of the top quark mass, and a measurement of the top quark charge are discussed.

  14. Top Quark Mass Measurements at the Tevatron

    E-Print Network [OSTI]

    Zhenyu Ye; for CDF; D0 collaborations

    2011-07-22

    We report the latest results on the top-quark mass and on the top-antitop mass difference from the CDF and D0 collaborations using data collected at the Fermilab Tevatron $p\\bar{p}$ collider at $\\sqrt{s}=1.96$ TeV. We discuss general issues in top-quark mass measurements and present new results from direct measurements and from top-pair production cross-section. We also report new results on the top-antitop mass difference.

  15. Top transport in electroweak baryogenesis

    E-Print Network [OSTI]

    Lars Fromme; Stephan J. Huber

    2006-05-09

    In non-supersymmetric models of electroweak baryogenesis the top quark plays a crucial role. Its CP-violating source term can be calculated in the WKB approximation. We point out how to resolve certain discrepancies between computations starting from the Dirac equation and the Schwinger--Keldysh formalism. We also improve on the transport equations, keeping the W-scatterings at finite rate. We apply these results to a model with one Higgs doublet, augmented by dimension-6 operators, where our refinements lead to an increase in the baryon asymmetry by a factor of up to about 5.

  16. MHD Integrated Topping Cycle Project

    SciTech Connect (OSTI)

    Not Available

    1992-07-01

    This eighteenth quarterly technical progress report of the MHD Integrated Topping cycle Project presents the accomplishments during the period November 1, 1991 to January 31, 1992. The precombustor is fully assembled. Manufacturing of all slagging stage components has been completed. All cooling panels were welded in place and the panel/shell gap was filled with RTV. Final combustor assembly is in progress. The low pressure cooling subsystem (LPCS) was delivered to the CDIF. Second stage brazing issues were resolved. The construction of the two anode power cabinets was completed.

  17. Table-top job analysis

    SciTech Connect (OSTI)

    Not Available

    1994-12-01

    The purpose of this Handbook is to establish general training program guidelines for training personnel in developing training for operation, maintenance, and technical support personnel at Department of Energy (DOE) nuclear facilities. TTJA is not the only method of job analysis; however, when conducted properly TTJA can be cost effective, efficient, and self-validating, and represents an effective method of defining job requirements. The table-top job analysis is suggested in the DOE Training Accreditation Program manuals as an acceptable alternative to traditional methods of analyzing job requirements. DOE 5480-20A strongly endorses and recommends it as the preferred method for analyzing jobs for positions addressed by the Order.

  18. Top Innovative Science of 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired Solar FuelTechnologyTel:FebruaryEIA's Today8 Things You Didn't » Top

  19. Top Science News of 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired Solar FuelTechnologyTel:FebruaryEIA's Today8 Things You Didn'tTop

  20. Top Ten Innovations of 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired Solar FuelTechnologyTel:FebruaryEIA's Today8 Things You Didn'tTop

  1. MHD Integrated Topping Cycle Project

    SciTech Connect (OSTI)

    Not Available

    1992-03-01

    The Magnetohydrodynamics (MHD) Integrated Topping Cycle (ITC) Project represents the culmination of the proof-of-concept (POC) development stage in the US Department of Energy (DOE) program to advance MHD technology to early commercial development stage utility power applications. The project is a joint effort, combining the skills of three topping cycle component developers: TRW, Avco/TDS, and Westinghouse. TRW, the prime contractor and system integrator, is responsible for the 50 thermal megawatt (50 MW{sub t}) slagging coal combustion subsystem. Avco/TDS is responsible for the MHD channel subsystem (nozzle, channel, diffuser, and power conditioning circuits), and Westinghouse is responsible for the current consolidation subsystem. The ITC Project will advance the state-of-the-art in MHD power systems with the design, construction, and integrated testing of 50 MW{sub t} power train components which are prototypical of the equipment that will be used in an early commercial scale MHD utility retrofit. Long duration testing of the integrated power train at the Component Development and Integration Facility (CDIF) in Butte, Montana will be performed, so that by the early 1990's, an engineering data base on the reliability, availability, maintainability and performance of the system will be available to allow scaleup of the prototypical designs to the next development level. This Sixteenth Quarterly Technical Progress Report covers the period May 1, 1991 to July 31, 1991.

  2. MHD Integrated Topping Cycle Project

    SciTech Connect (OSTI)

    Not Available

    1992-01-01

    The overall objective of the project is to design and construct prototypical hardware for an integrated MHD topping cycle, and conduct long duration proof-of-concept tests of integrated system at the US DOE Component Development and Integration Facility in Butte, Montana. The results of the long duration tests will augment the existing engineering design data base on MHD power train reliability, availability, maintainability, and performance, and will serve as a basis for scaling up the topping cycle design to the next level of development, an early commercial scale power plant retrofit. The components of the MHD power train to be designed, fabricated, and tested include: A slagging coal combustor with a rated capacity of 50 MW thermal input, capable of operation with an Eastern (Illinois {number sign}6) or Western (Montana Rosebud) coal, a segmented supersonic nozzle, a supersonic MHD channel capable of generating at least 1.5 MW of electrical power, a segmented supersonic diffuser section to interface the channel with existing facility quench and exhaust systems, a complete set of current control circuits for local diagonal current control along the channel, and a set of current consolidation circuits to interface the channel with the existing facility inverter.

  3. Top polarisation measurement and anomalous $Wtb$ coupling

    E-Print Network [OSTI]

    Arun Prasath; Rohini M. Godbole; Saurabh D. Rindani

    2014-12-09

    Kinematical distributions of the decay products of the top quark carry information on the polarisation of the top as well as on any possible new physics in the decay of the top quark. We construct observables in the form of asymmetries in the kinematical distributions to probe their effects. Charged-lepton angular distributions in the decay are insensitive to anomalous couplings and are a sensitive measure of top polarisation. However, these are difficult to measure in the case of highly boosted top quarks as compared to energy distributions of decay products. These are then sensitive, in general, to both top polarisation and top anomalous couplings. We compare various asymmetries for their sensitivities to the polarisation of the top quark as well as to possible new physics in the $Wtb$ vertex, paying special attention to the case of highly boosted top quarks. We perform a $\\chi ^2$- analysis to determine the regions in the polarisation of the top quark and the couplings of the $Wtb$ vertex constrained by different combinations of the asymmetries.

  4. NEXT GENERATION LUMINAIRES INDOOR JUDGING 2014

    Broader source: Energy.gov [DOE]

    View this behind-the-scenes look at the 2014 NGL judging event where entries were evaluated by a panel of judges drawn from the architectural lighting community in an intensive three-step process...

  5. Top quark mass measurements at CDF

    SciTech Connect (OSTI)

    Brubaker, Erik; /Chicago U., EFI

    2006-05-01

    The mass of the top quark M{sub top} is interesting both as a fundamental parameter of the standard model and as an important input to precision electroweak tests. The Collider Detector at Fermilab (CDF) has a robust program of top quark mass analyses, including the most precise single measurement, M{sub top} = 173.4 {+-} 2.8 GeV/c{sup 2}, using 680 pb{sup -1} of p{bar p} collision data. A combination of current results from CDF gives M{sub top} = 172.0 {+-} 2.7 GeV/c{sup 2}, surpassing the stated goal of 3 GeV/c{sup 2} precision using 2 fb{sup -1} of data. Finally, a combination with current D0 results gives a world average top quark mass of 172.5 {+-} 2.3 GeV/c{sup 2}.

  6. TOP500 Supercomputers for June 2005

    SciTech Connect (OSTI)

    Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack; Simon, Horst D.

    2005-06-22

    25th Edition of TOP500 List of World's Fastest Supercomputers Released: DOE/L LNL BlueGene/L and IBM gain Top Positions MANNHEIM, Germany; KNOXVILLE, Tenn.; BERKELEY, Calif. In what has become a closely watched event in the world of high-performance computing, the 25th edition of the TOP500 list of the world's fastest supercomputers was released today (June 22, 2005) at the 20th International Supercomputing Conference (ISC2005) in Heidelberg Germany.

  7. TOP500 Supercomputers for June 2004

    SciTech Connect (OSTI)

    Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack; Simon, Horst D.

    2004-06-23

    23rd Edition of TOP500 List of World's Fastest Supercomputers Released: Japan's Earth Simulator Enters Third Year in Top Position MANNHEIM, Germany; KNOXVILLE, Tenn.;&BERKELEY, Calif. In what has become a closely watched event in the world of high-performance computing, the 23rd edition of the TOP500 list of the world's fastest supercomputers was released today (June 23, 2004) at the International Supercomputer Conference in Heidelberg, Germany.

  8. TOP500 Supercomputers for November 2004

    SciTech Connect (OSTI)

    Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack; Simon, Horst D.

    2004-11-08

    24th Edition of TOP500 List of World's Fastest Supercomputers Released: DOE/IBM BlueGene/L and NASA/SGI's Columbia gain Top Positions MANNHEIM, Germany; KNOXVILLE, Tenn.; BERKELEY, Calif. In what has become a closely watched event in the world of high-performance computing, the 24th edition of the TOP500 list of the worlds fastest supercomputers was released today (November 8, 2004) at the SC2004 Conference in Pittsburgh, Pa.

  9. Top for economics Rank Business School

    E-Print Network [OSTI]

    Lin, Xiaodong

    Top for economics Rank Business School 1 University of Chicago: Booth Rutgers Business School of Strathclyde Business School University of Pretoria, Gibs IMD 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 Top/WHU Beisheim Tsinghua University/Insead Top for international business Rank Business School 1 2 3 4 5 6 7 8 9

  10. Top quark properties at the Tevatron

    E-Print Network [OSTI]

    Andreas Werner Jung

    2014-12-12

    Recent measurements of top-quark properties at the Tevatron, including top quark production asymmetries and properties, are presented. Latest updates of measurements of top quark production asymmetries include the measurement of the $t\\bar{t}$ production asymmetry by D0 employing the full Run II data set, in the lepton + jets and dilepton decay channel. Within their uncertainties the results from all these measurements agree with their respective Standard Model expectation.

  11. MHD Integrated Topping Cycle Project

    SciTech Connect (OSTI)

    Not Available

    1992-07-01

    This seventeenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period August 1, 1991 to October 31, 1991. Manufacturing of the prototypical combustor pressure shell has been completed including leak, proof, and assembly fit checking. Manufacturing of forty-five cooling panels was also completed including leak, proof, and flow testing. All precombustor internal components (combustion can baffle and swirl box) were received and checked, and integration of the components was initiated. A decision was made regarding the primary and backup designs for the 1A4 channel. The assembly of the channel related prototypical hardware continued. The cathode wall electrical wiring is now complete. The mechanical design of the diffuser has been completed.

  12. Top Quark Production Asymmetries AFBt and AFBl

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Berger, Edmond L.; Cao, Qing-Hong; Chen, Chuan-Ren; Yu, Jiang-Hao; Zhang, Hao

    2012-02-14

    A large forward-backward asymmetry is seen in both the top quark rapidity distribution AFBt and in the rapidity distribution of charged leptons AFBl from top quarks produced at the Tevatron. We study the kinematic and dynamic aspects of the relationship of the two observables arising from the spin correlation between the charged lepton and the top quark with different polarization states. We emphasize the value of both measurements, and we conclude that a new physics model which produces more right-handed than left-handed top quarks is favored by the present data.

  13. New Physics in Top at Tevatron

    E-Print Network [OSTI]

    Amnon Harel; for the CDF Collaboration; for the D0 Collaboration

    2011-09-18

    I report on direct and indirect searches for new physics in top events from the CDF and D0 Collaborations at the Fermilab Tevatron Collider.

  14. Press Pass - Press Release - Single top quark

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Higgs." Discovering the single top quark production presents challenges similar to the Higgs boson search in the need to extract an extremely small signal from a very large...

  15. Unvented, Conditioned Crawlspaces - Building America Top Innovation...

    Broader source: Energy.gov (indexed) [DOE]

    the interior of a framed crawlspace with insulation installed. This Top Innovation profile highlights Building America research into the benefits of closed, conditioned crawlspaces...

  16. Top quark physics in hadron collisions

    E-Print Network [OSTI]

    Wolfgang Wagner

    2007-08-03

    The top quark is the heaviest elementary particle observed to date. Its large mass makes the top quark an ideal laboratory to test predictions of perturbation theory concerning heavy quark production at hadron colliders. The top quark is also a powerful probe for new phenomena beyond the Standard Model of particle physics. In addition, the top quark mass is a crucial parameter for scrutinizing the Standard Model in electroweak precision tests and for predicting the mass of the yet unobserved Higgs boson. Ten years after the discovery of the top quark at the Fermilab Tevatron top quark physics has entered an era where detailed measurements of top quark properties are undertaken. In this review article an introduction to the phenomenology of top quark production in hadron collisions is given, the lessons learned in Tevatron Run I are summarized, and first Run II results are discussed. A brief outlook to the possibilities of top quark research a the Large Hadron Collider, currently under construction at CERN, is included.

  17. Top Quark Physics at the CDF Experiment

    E-Print Network [OSTI]

    Bernd Stelzer; for the CDF Collaboration

    2010-07-21

    Fermilab's Tevatron accelerator is recently performing at record luminosities that enables a program systematically addressing the physics of top quarks. The CDF collaboration has analyzed up to 5/fb of proton anti-proton collisions from the Tevatron at a center of mass energy of 1.96 TeV. The large datasets available allow to push top quark measurements to higher and higher precision and have lead to the recent observation of electroweak single top quark production at the Tevatron. This article reviews recent results on top quark physics from the CDF experiment.

  18. Top Six Areawide Contract Provisions Forgotten

    Broader source: Energy.gov (indexed) [DOE]

    TOP SIX AREAWIDE CONTRACT PROVISIONS FORGOTTEN LINDA L. COLLINS Hosted by: FEDERAL UTILITY PARTNERSHIP WORKING GROUP SEMINAR November 5-6, 2014 Cape Canaveral. Florida ONE * Term...

  19. Top Quark Production Asymmetries AFBt and AFBl

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Berger, Edmond L.; Cao, Qing-Hong; Chen, Chuan-Ren; Yu, Jiang-Hao; Zhang, Hao

    2012-02-01

    A large forward-backward asymmetry is seen in both the top quark rapidity distribution AFBt and in the rapidity distribution of charged leptons AFBl from top quarks produced at the Tevatron. We study the kinematic and dynamic aspects of the relationship of the two observables arising from the spin correlation between the charged lepton and the top quark with different polarization states. We emphasize the value of both measurements, and we conclude that a new physics model which produces more right-handed than left-handed top quarks is favored by the present data.

  20. Jet substructures of boosted polarized top quarks

    E-Print Network [OSTI]

    Yoshio Kitadono; Hsiang-nan Li

    2014-09-05

    We study jet substructures of a boosted polarized top quark, which undergoes the semileptonic decay $t\\to b\\ell\

  1. Supercomputing Challenge top winners: Los Alamos schools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    schools Cole Kendrick won the top prize for his research project, "Computer Simulation of Dark Matter Effects on Galaxy Rotation". April 26, 2011 Cole Kendrick Cole Kendrick...

  2. Mesa Top Photovoltaic Array (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-07-01

    Fact sheet overview of the Mesa Top Photovoltaic Array project implemented by the Department of Energy Golden Office and National Renewable Energy Laboratory.

  3. NNLL threshold resummation for top-pair and single-top production

    E-Print Network [OSTI]

    Nikolaos Kidonakis

    2012-12-17

    I discuss threshold resummation at NNLL accuracy in the standard moment-space approach in perturbative QCD for top-pair and single-top production. For top quark pair production I present new approximate NNLO results for the total cross section and for the top quark transverse momentum and rapidity distributions at 8 TeV LHC energy. I discuss the accuracy of the soft-gluon approximation and show that the NLO and NNLO approximate results from resummation are practically indistinguishable from exact NLO and partial NNLO results. For single top production I present new approximate NNLO results for the total cross sections in all three channels at the LHC and also for the top quark transverse momentum distributions in t-channel production and in top-quark associated production with a W boson. For both ttbar and single-top production the agreement of theoretical results with LHC and Tevatron data is excellent.

  4. PoS(TOP2006)026 Top properties within the SM

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    PoS(TOP2006)026 Top properties within the SM Bernardo Resende CPPM, CNRS/IN2P3 - Univ. Méditerranée, Marseille, France E-mail: resende@cppm.in2p3.fr The high number of top quarks which Workshop on Top Quark Physics January 12-15, 2006 Coimbra, Portugal ¡ On behalf of the CMS and ATLAS

  5. CDF/PUB/TOP/CDFR/11033 Updated Measurement of the Single Top Quark Production Cross1

    E-Print Network [OSTI]

    Quigg, Chris

    CDF/PUB/TOP/CDFR/11033 Updated Measurement of the Single Top Quark Production Cross1 Section in the form of a reconstructed jet.30 The first CDF measurement of electroweak single top quark production 1 URL http://www-cdf.fnal.gov5 (Dated: May 9, 2014)6 Abstract An updated measurement

  6. Tools for top physics at D0

    E-Print Network [OSTI]

    Amnon Harel

    2008-07-24

    Top quark measurements rely on the jet energy calibration and often on b-quark identification. We discuss these and other tools and how they apply to top quark analyses at D0. In particular some of the nuances that result from D0's data driven approach to these issues are presented.

  7. Top quark property measurements at the LHC

    E-Print Network [OSTI]

    Richard Hawkings

    2014-10-29

    Measurements of top quark properties performed at the Large Hadron Collider are reviewed, with a particular emphasis on top-pair charge asymmetries, spin correlations and polarization measurements performed by the ATLAS and CMS collaborations. The measurements are generally in good agreement with predictions from next-to-leading-order QCD calculations, and no deviations from Standard Model expectations have been seen.

  8. Odd Top Partners at the LHC

    E-Print Network [OSTI]

    Archana Anandakrishnan; Jack H. Collins; Marco Farina; Eric Kuflik; Maxim Perelstein

    2015-06-16

    LHC searches for fermionic top partners $T$ focus on three decay topologies: $T\\to bW$, $T\\to tZ$, and $T\\to th$. However, top partners may carry new conserved quantum numbers that forbid these decays. The simplest possibility is a conserved parity, under which the top partner is odd and all SM states are even. In this case, decays of top partners may involve new particle-odd scalars, leading to signal topologies more commonly associated with supersymmetry, either with or without R-parity conservation. We study a simplified model in which this possibility is realized, and estimate the bounds on the top partner mass in this model implied by LHC searches for supersymmetry. We find that the bounds can be significantly weaker than in the conventional top partner decay scenario. For example, if the new parity is exact, a 500 GeV top partner is allowed as long as the lightest parity-odd scalar mass is between 325 and 500 GeV. The lower allowed top partner mass reduces the need for fine-tuning in the Higgs mass parameter, compared to the conventional decay scenario. We also present an explicit model, the Oddest Little Higgs, which exhibits this phenomenology.

  9. The Top Quark - 2006 and Beyond

    E-Print Network [OSTI]

    John Womersley

    2006-04-04

    We know there is new physics at the electroweak scale, but we don't know what it is. Right now, the top quark is our only window on to this physics. In almost all models of electroweak symmetry breaking, top either couples strongly to new particles or its properties are modified in some way. Top is being studied in detail at the Fermilab Tevatron. Its production cross section has been measured in a variety of channels; its mass has been determined to better than 2%, and can be used to constrain the mass of the Higgs. Top quark decays have been tested and non-standard production mechanisms searched for. Single top production probes the electroweak properties of top, and has not yet been observed; searches are now closing in on this process and it should be seen soon. So far, all of the top quark's properties are consistent with the Standard Model. However, the data still to come at the Tevatron will increase the precision of all these measurements, and the enormous statistics available at the LHC will open up new possibilities such as observation of spin correlations and perhaps even CP violation in the top sector.

  10. Simulation of Top Oil Temperature for Transformers

    E-Print Network [OSTI]

    Simulation of Top Oil Temperature for Transformers Masters Thesis and Final Project Report Power of Mines Georgia Tech · Illinois · Iowa State · Texas A&M · Washington State · Wisconsin Simulation of Top-Oil for the PSERC project "On-Line Peak Loading of Substation Distribution Transformers Through Accurate Temperature

  11. CP violation in top-quark physics

    E-Print Network [OSTI]

    German Valencia

    2010-07-27

    In this talk I review how to search for CP violation in top-quark pair production and decay using T-odd correlations. I discuss two examples which illustrate many of the relevant features: CP violation in a heavy neutral Higgs boson; and CP violating anomalous top-quark couplings. I present some numerical results for the LHC and some for the Tevatron.

  12. TOP500 Supercomputers for June 2002

    SciTech Connect (OSTI)

    Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack; Simon, Horst D.

    2002-06-20

    19th Edition of TOP500 List of World's Fastest Supercomputers Released MANNHEIM, Germany; KNOXVILLE, Tenn.;&BERKELEY, Calif. In what has become a much-anticipated event in the world of high-performance computing, the 19th edition of the TOP500 list of the worlds fastest supercomputers was released today (June 20, 2002). The recently installed Earth Simulator supercomputer at the Earth Simulator Center in Yokohama, Japan, is as expected the clear new number 1. Its performance of 35.86 Tflop/s (trillions of calculations per second) running the Linpack benchmark is almost five times higher than the performance of the now No.2 IBM ASCI White system at Lawrence Livermore National Laboratory (7.2 Tflop/s). This powerful leap frogging to the top by a system so much faster than the previous top system is unparalleled in the history of the TOP500.

  13. Top-of-Rail lubricant

    SciTech Connect (OSTI)

    Alzoubi, M. F.; Fenske, G. R.; Erck, R. A.; Boparai, A. S.

    2000-07-14

    Analysis of the volatile and semivolatile fractions collected after use of the TOR lubricant indicated that other than contaminants in the collection laboratory, no compounds on the EPA's Target Compound Lists (Tables 2 and 5) were detected in these fractions. The data of these qualitative analyses, given in the various tables in the text, indicate only the relative amounts of the tentatively identified compounds. The authors recommend that quantitative analysis be performed on the volatile and semivolatile fractions to allow confirmation of the tentatively identified compounds and to obtain absolute amounts of the detected compounds. Additionally, the semivolatile fraction should be analyzed by liquid chromatography/mass spectrometry to identify compounds that are not chromatographable under the temperature program used for determination of semivolatile compounds. Introducing the top-of-rail (TOR) lubricant into the wheel/rail interface results in a reduction of almost 60% of lateral friction force over the forces encountered under dry conditions. This reveals good potential for energy savings, as well as wear reduction, for railroad companies. In TOR lubrication, an increase in the angle of attack and axle load results in increased lateral friction and rate of lubricant consumption. The most efficient TOR lubricant quantity to be used in the wheel/rail interface must be calculated precisely according to the number of cars, axle loads, train speed, and angle of attack.

  14. MHD Integrated Topping Cycle Project

    SciTech Connect (OSTI)

    Not Available

    1992-02-01

    This fourteenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period November 1, 1990 to January 31, 1991. Testing of the High Pressure Cooling Subsystem electrical isolator was completed. The PEEK material successfully passed the high temperature, high pressure duration tests (50 hours). The Combustion Subsystem drawings were CADAM released. The procurement process is in progress. An equipment specification and RFP were prepared for the new Low Pressure Cooling System (LPCS) and released for quotation. Work has been conducted on confirmation tests leading to final gas-side designs and studies to assist in channel fabrication.The final cathode gas-side design and the proposed gas-side designs of the anode and sidewall are presented. Anode confirmation tests and related analyses of anode wear mechanisms used in the selection of the proposed anode design are presented. Sidewall confirmation tests, which were used to select the proposed gas-side design, were conducted. The design for the full scale CDIF system was completed. A test program was initiated to investigate the practicality of using Avco current controls for current consolidation in the power takeoff (PTO) regions and to determine the cause of past current consolidation failures. Another important activity was the installation of 1A4-style coupons in the 1A1 channel. A description of the coupons and their location with 1A1 channel is presented herein.

  15. CDF/TOP/DOC/6265 Version 1.1

    E-Print Network [OSTI]

    CDF/TOP/DOC/6265 Version 1.1 January 14, 2003 Description of data samples for Top and Electroweak a complete description of the high p T electron and muon data samples which will be used for Top from the Top Group Data page http://www-cdf.fnal.gov/internal/physics/top/topdata/newtopdata.html 1

  16. Tevatron Top-Quark Combinations and World Top-Quark Mass Combination

    E-Print Network [OSTI]

    Reinhild Yvonne Peters; on behalf of the ATLAS; CDF; CMS; D0 collaborations

    2014-11-04

    Almost 20 years after its discovery, the top quark is still an interesting particle, undergoing precise investigation of its properties. For many years, the Tevatron proton antiproton collider at Fermilab was the only place to study top quarks in detail, while with the recent start of the LHC proton proton collider a top quark factory has opened. An important ingredient for the full understanding of the top quark is the combination of measurements from the individual experiments. In particular, the Tevaton combinations of single top-quark cross sections, the ttbar production cross section, the W helicity in top-quark decays as well as the Tevatron and the world combination of the top-quark mass are discussed.

  17. Investigating SANS/CWE Top 25 Programming Errors. 1 Investigating the SANS/CWE Top 25 Programming Errors List

    E-Print Network [OSTI]

    Hamlen, Kevin W.

    Investigating SANS/CWE Top 25 Programming Errors. 1 Investigating the SANS/CWE Top 25 Programming Errors List Running Title: Investigating SANS/CWE Top 25 Programming Errors. Investigating the SANS;Investigating SANS/CWE Top 25 Programming Errors. 2 Investigating the SANS/CWE Top 25 Programming Errors List

  18. Top Quark Physics at the LHC

    E-Print Network [OSTI]

    Jorgen D'hondt

    2007-07-10

    The Large Hadron Collider (LHC) is expected to provide proton-proton collisions at a centre-of-mass energy of 14 TeV, yielding millions of of top quark events. The top-physics potential of the two general purpose experiments, ATLAS and CMS, is discussed according to state-of-the-art simulation of both physics and detectors. An overview is given of the most important results with emphasis on the expected improvements in our understanding of physics connected to the top quark.

  19. Why the Top Two Primary Fails California Voters

    E-Print Network [OSTI]

    Maviglio, Steven

    2015-01-01

    Why the Top Two Primary Fails California Voters Steven14, the proponents of the Top Two primary made some boldto voters. They said the Top Two would “reduce gridlock,” “

  20. Top Incomes in the Long Run of History

    E-Print Network [OSTI]

    Atkinson, Anthony B.; Piketty, Thomas; Saez, Emmanuel

    2012-01-01

    A. B. and T. Piketty eds. Top Incomes over the TwentiethPress. Atkinson, Anthony B. (2010) “Top incomes in a rapidlyA. B. and T. Piketty eds. Top Incomes over the Twentieth

  1. California’s Top Two Primary and the Business Agenda

    E-Print Network [OSTI]

    McGhee, Eric

    2015-01-01

    Quinn, Tony. 2013. The “Top Two” System: Working Like ItAssessing California’s Top-Two Primary and RedistrictingCalifornia’s Top Two Primary and the Business Agenda Eric

  2. Top 10 plant pathogenic bacteria in molecular plant pathology.

    E-Print Network [OSTI]

    2012-01-01

    Foster, G.D. (2012) The top 10 fungal pathogens in molecularBLACKWELL PUBLISHING LTD Top 10 plant pathogenic bacteriaC. and Foster, G.D. (2011) Top 10 plant viruses in molecular

  3. Is California's Top Two Primary Bad for Women Candidates?

    E-Print Network [OSTI]

    Merrill, Katie

    2015-01-01

    to assess the impact of the Top Two over the next two orIs California’s Top Two Primary Bad for Women Candidates?Katie Merrill Since the Top Two was first used in the

  4. Voter Behavior in California’s Top Two Primary

    E-Print Network [OSTI]

    Nagler, Jonathan

    2015-01-01

    simply need time to adapt. The Top Two was a radical changelonger-term effect of the Top Two. References Alvarez, R.915–930. Donovan, Todd. 2012. “The Top Two Primary: What Can

  5. Top quark mass and properties at the Tevatron

    E-Print Network [OSTI]

    J. -F. Arguin; for the CDF; D0 Collaborations

    2005-07-29

    We present recent analyses of top quark properties performed at Run II of the Tevatron. Measurements of the top quark mass, branching ratios and W boson helicity inside top quark decays are covered.

  6. Smoking in top-grossing US movies 2014

    E-Print Network [OSTI]

    Polansky, Jonathan R; Titus, Kori; Atayeva, Renata; Glantz, Stanton A PhD

    2015-01-01

    Smoking in top?grossing US movies Jonathan R. PolanskyApril 23, 2015 Smoking in top?grossing US movies: 2014 | 2about 20 percent of all top?grossing films. Tobacco presence

  7. Press Pass - Press Release - Single Top

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DZero finds evidence of rare single top quark; Observation marks a step closer to finding Higgs boson Batavia, Ill.--Scientists of the DZero collaboration at the Department of...

  8. Selling Energy Conservation Projects to Top Management 

    E-Print Network [OSTI]

    Jonsson, K. A.

    1983-01-01

    A guide to presenting proposals on Energy Conservation Projects by plant engineers to their top level management, in order to get approval for Energy Conservation Projects. Through the author's past experience he ascertained that many Energy...

  9. Vapor Retarder Classification - Building America Top Innovation...

    Broader source: Energy.gov (indexed) [DOE]

    vapor retarder classification. Air-tight and well-insulated homes have little or no tolerance for drying if they get wet; moisture control is critical. This Top Innovation profile...

  10. Buried and Encapsulated Ducts - Building America Top Innovation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Buried and Encapsulated Ducts - Building America Top Innovation Buried and Encapsulated Ducts - Building America Top Innovation photo of worker blowing insulation on ducts in an...

  11. The Business Case for Fuel Cells 2011: Energizing America's Top...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Business Case for Fuel Cells 2011: Energizing America's Top Companies The Business Case for Fuel Cells 2011: Energizing America's Top Companies This report profiles a select...

  12. Water Management Guide - Building America Top Innovation | Department...

    Energy Savers [EERE]

    Water Management Guide - Building America Top Innovation Water Management Guide - Building America Top Innovation Cover of the EEBA Water Management Guide. As energy codes and...

  13. Tankless Gas Water Heater Performance - Building America Top...

    Energy Savers [EERE]

    Tankless Gas Water Heater Performance - Building America Top Innovation Tankless Gas Water Heater Performance - Building America Top Innovation This photo shows a hot water heater...

  14. HVAC Cabinet Air Leakage Test Method - Building America Top Innovation...

    Energy Savers [EERE]

    HVAC Cabinet Air Leakage Test Method - Building America Top Innovation HVAC Cabinet Air Leakage Test Method - Building America Top Innovation While HVAC installers have improved...

  15. Social Media and Messages that Matter - Top Tips and Tools |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Messages that Matter - Top Tips and Tools Social Media and Messages that Matter - Top Tips and Tools Better Buildings Residential Network Peer Exchange Call Series: Social...

  16. Building America Top Innovations Hall of Fame Profile - Building...

    Energy Savers [EERE]

    Top Innovations Hall of Fame Profile - Building Energy Optimization Analysis Method (BEopt) Building America Top Innovations Hall of Fame Profile - Building Energy Optimization...

  17. Advanced Framing Systems and Packages - Building America Top...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Framing Systems and Packages - Building America Top Innovation Advanced Framing Systems and Packages - Building America Top Innovation This photo shows advanced framing...

  18. Unvented Crawlspace Code Adoption - Building America Top Innovation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Unvented Crawlspace Code Adoption - Building America Top Innovation Unvented Crawlspace Code Adoption - Building America Top Innovation Photo of an unvented and insulated...

  19. JLab Recognizes Security Firm as Top Small Business Subcontractor...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Recognizes Security Firm as Top Small Business Subcontractor for 2009 Small Business Mike Dallas, Jefferson Lab's chief operating officer, presents Nicole Stuart, Top Guard...

  20. TOP 10 VULNERABILITIES OF CONTROL SYSTEMS AND THEIR ASSOCIATED...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TOP 10 VULNERABILITIES OF CONTROL SYSTEMS AND THEIR ASSOCIATED MITIGATIONS TOP 10 VULNERABILITIES OF CONTROL SYSTEMS AND THEIR ASSOCIATED MITIGATIONS This document provides...

  1. Next Generation Advanced Framing - Building America Top Innovation...

    Energy Savers [EERE]

    Next Generation Advanced Framing - Building America Top Innovation Next Generation Advanced Framing - Building America Top Innovation This photo shows advanced framing on a rim...

  2. Top 10 Vulnerabilities of Control Systems and Their Associated...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Top 10 Vulnerabilities of Control Systems and Their Associated Migitations (2006) Top 10 Vulnerabilities of Control Systems and Their Associated Migitations (2006) This document...

  3. Building Science-Based Climate Maps - Building America Top Innovation...

    Energy Savers [EERE]

    Building Science-Based Climate Maps - Building America Top Innovation Building Science-Based Climate Maps - Building America Top Innovation Photo showing climate zone maps based on...

  4. High-Efficiency Window Air Conditioners - Building America Top...

    Energy Savers [EERE]

    Efficiency Window Air Conditioners - Building America Top Innovation High-Efficiency Window Air Conditioners - Building America Top Innovation This photo shows a window air...

  5. DOE Announces Webinars on Top Solar Tools, Building Energy Optimizatio...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Top Solar Tools, Building Energy Optimization Tool Training, and More DOE Announces Webinars on Top Solar Tools, Building Energy Optimization Tool Training, and More May 8, 2014 -...

  6. Quality Management System Guidelines - Building America Top Innovation...

    Energy Savers [EERE]

    Quality Management System Guidelines - Building America Top Innovation Quality Management System Guidelines - Building America Top Innovation Effec guid-quality-mgnt.png The...

  7. Deputy Energy Secretary Sherwood-Randall Highlights a Top Budget...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Deputy Energy Secretary Sherwood-Randall Highlights a Top Budget Priority in Texas Deputy Energy Secretary Sherwood-Randall Highlights a Top Budget Priority in Texas February 3,...

  8. Tools for top physics at CDF

    SciTech Connect (OSTI)

    Palencia, E.; /Fermilab

    2008-07-01

    The authors describe here the different tools used for top physics analysis in the CDF Collaboration. In particular, they discuss how the jet energy scale, lepton identification, b tagging algorithms and the neural networks help to improve the signal to background ratio of the top sample in some cases and to reduce the dominant uncertainties in other. Results using each one of these tools are also presented.

  9. Single top quark production at D0

    E-Print Network [OSTI]

    Reinhard Schwienhorst; for the D0 collaboration

    2011-09-13

    Updates of electroweak single top quark production measurements by the D0 collaboration are presented using 5.4fb^-1 of proton-antiproton collision data from the Tevatron at Fermilab. Measurements of the t-channel, s-channel and combined single top quark production cross section are presented, including an updated lower limit on the CKM matrix element |V_tb|. Also reported are results from searches for gluon-quark flavor-changing neutral currents and W' boson production.

  10. Top-quark transverse-momentum distributions in t-channel single-top production

    E-Print Network [OSTI]

    Nikolaos Kidonakis

    2013-06-15

    I present approximate next-to-next-to-leading-order (NNLO) top-quark transverse momentum, pT, distributions in t-channel single-top production. These distributions are derived from next-to-next-to-leading-logarithm (NNLL) soft-gluon resummation. Theoretical results for the single top as well as the single antitop pT distributions are shown for LHC and Tevatron energies.

  11. CDF/PUB/TOP/PUBLIC/10793 Measurement of Single Top Quark Production

    E-Print Network [OSTI]

    Quigg, Chris

    CDF/PUB/TOP/PUBLIC/10793 Measurement of Single Top Quark Production in 7.5 fb-1 of CDF Data Using a measurement of single top quark production in lepton plus jets final state using 7.5 fb-1 of p¯p collision. We measure a cross section of 3.04+0.57 -0.53pb (stat+syst) and set a lower limit |Vtb| > 0

  12. CDF/PUB/TOP/PUBLIC/10793 Measurement of Single Top Quark Production

    E-Print Network [OSTI]

    Quigg, Chris

    CDF/PUB/TOP/PUBLIC/10793 Measurement of Single Top Quark Production in 7.5 fb-1 of CDF Data Using a measurement of single top quark production in lepton plus jets final state using 7.5 fb-1 of p¯p collision. We measure a cross section of 3.04+0.57 -0.53pb (stat. + syst.) and set a lower limit |Vtb| > 0

  13. A combined top-down and down-top search method for determining

    E-Print Network [OSTI]

    Ta Van Tu

    2014-11-04

    in top-down search methods, for example, in cases when the MOLP problem has only one efficient point or only low dimensional efficient faces. In addition, the ...

  14. Top Quark Properties in Little Higgs Models

    SciTech Connect (OSTI)

    Berger, C.F.; /SLAC; Perelstein, M.; /Cornell U., CIHEP; Petriello, F.; /Wisconsin U., Madison

    2005-12-08

    Identifying the mechanism which breaks electroweak symmetry and generates fermion masses is one of the main physics goals for both the LHC and the ILC. Studies of the top quark have the potential to illuminate this issue; since it is the heaviest of the Standard Model (SM) fermions, the top is expected to couple strongly to the symmetry-breaking sector. Consequently, the structure of that sector can have significant, potentially observable effects on the properties of the top. for example, it is well known that the vector and axial t{bar t}Z form factors receive large corrections (of order 5-10%) in certain models of dynamical electroweak symmetry breaking [1]. At future colliders such as the LHC and the ILC, we will be able to pursue a program of precision top physics, similar to the program studying the Z at LEP and SLC. In this manuscript, they study the corrections to the top quark properties in ''Little Higgs'' models of electroweak symmetry breaking [2], and compare the expected deviations from the SM predictions with expected sensitivities of experiments at the LHC and the ILC. In the Little Higgs models, electroweak symmetry is driven by the radiative effects from the top sector, including the SM-like top and its heavy counterpart, a TeV-scale ''heavy top'' T. Probing this structure experimentally is quite difficult. While the LHC should be able to discover the T quark, its potential for studying its couplings is limited [3,4]. Direct production of the T will likely be beyond the kinematic reach of the ILC. However, we will show below that the corrections to the gauge couplings of the SM top, induced by its mixing with the T, will be observable at the ILC throughout the parameter range consistent with naturalness. Measuring these corrections will provide a unique window on the top sector of the Little Higgs. Many Little Higgs models have been proposed in the literature. We will consider two examples in this study, the ''Littlest Higgs'' model [5], and its variation incorporating T parity [6].

  15. Vehicle Technologies Program: Goals, Strategies, and Top Accomplishments (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-12-01

    Fact sheet describes the Vehicle Technologies Program and its goals, strategies and top accomplishments.

  16. TOP QUARK PHYSICS AT THE NLC CARL R. SCHMIDT

    E-Print Network [OSTI]

    Schmidt, Carl

    TOP QUARK PHYSICS AT THE NLC CARL R. SCHMIDT Santa Cruz Institute for Particle Physics University) is an excellent tool for studying the properties of the top quark. In this talk I review some of the theory of top, is an ideal tool for studying the properties of the top quark. The event environment in e + e \\Gamma

  17. top 3 winners receive one of the following

    E-Print Network [OSTI]

    Rock, Chris

    top 3 winners receive one of the following: · iPad® · GoPro® Camera · Mountain Bike TOP 20 AT THE COMMONS FOR THE REMAINDER OF THE SEMESTER! TOP THAT AT TEXAS TECH! Sauce It, Stack It, Slice It. Any Way Pizza Contest TOP THAT! CREATIVE PIZZA CONTEST ENTRY FORM JUDGING CRITERIA: Among all qualified entries

  18. Top Physics at the Tevatron Cecilia E. Gerber

    E-Print Network [OSTI]

    Gerber, Cecilia E.

    Top Physics at the Tevatron Cecilia E. Gerber University of Illinois-Chicago 2008 Linear Collider · Motivation Introduction to top production and decay· Introduction to top production and decay · Studies of Top quark pair production and decay properties ­ Is the SM correct? ­ Model-dependent searches

  19. Top Mass Measurements with the D0 Detector

    E-Print Network [OSTI]

    Daniel Boline

    2015-01-18

    I present recent results related to the measurement of the top quark mass, using $p\\bar{p}$ collisions recorded with the D{\\O}Detector at the Tevatron. The results are: A direct measurement of the mass difference between top and anti-top quarks, Measurement of the top quark mass in the lepton+jets channel and in the dilepton channel.

  20. Top-percentile traffic routing problem by Dynamic Programming

    E-Print Network [OSTI]

    Grothey, Andreas

    Top-percentile traffic routing problem by Dynamic Programming Andreas Grothey, Xinan Yang School according to top-percentile pricing. We call this problem the Top-percentile Traffic Routing Problem (Tp problem, which is hard to solve due to the integer variables introduced by top-percentile pricing. Several

  1. Top Quark Physics at the ILC: Methods and Meanings

    E-Print Network [OSTI]

    Zack Sullivan

    2009-03-06

    The physics case for studying top-quark physics at the International Linear Collider is well established. This summary places in context the top-quark physics goals, examines the current state-of-the art in understanding of the top-quark mass, and identifies some areas in which the study of the top-quark mass enhances our understanding of new techniques.

  2. Materials Technologies: Goals, Strategies, and Top Accomplishments (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-08-01

    Document details the goals, strategies, and top accomplishments of DOE's Materials Technologies subprogram.

  3. Beef customer satisfaction: factors affecting consumer evaluations of clod, top round, and top sirloin steaks 

    E-Print Network [OSTI]

    Goodson, Kyla Judene

    2000-01-01

    by either USDA grade or marinade. Flavor Like was the sensory trait most closely related to customer satisfaction of clod and top round steaks. Top sirloin steaks were evaluated by a different population of consumers in Chicago. One half of the consumers...

  4. Top polarization as a probe of new physics

    E-Print Network [OSTI]

    Rohini M Godbole; Saurabh D Rindani; Kumar Rao; Ritesh K Singh

    2010-04-16

    We investigate the effects of new physics scenarios containing a high mass vector resonance on top pair production at the LHC, using the polarization of the produced top. In particular we use kinematic distributions of the secondary lepton coming from top decay, which depends on top polarization, as it has been shown that the angular distribution of the decay lepton is insensitive to the anomalous tbW vertex and hence is a pure probe of new physics in top quark production. Spin sensitive variables involving the decay lepton are used to probe top polarization. Some sensitivity is found for the new couplings of the top.

  5. High-order threshold corrections for top-pair and single-top production

    E-Print Network [OSTI]

    Nikolaos Kidonakis

    2015-09-25

    I present results for high-order corrections from threshold resummation to cross sections and differential distributions in top-antitop pair production and in single-top production. I show aN$^3$LO results for the total $t{\\bar t}$ cross section as well as for the top-quark transverse momentum ($p_T$) and rapidity distributions, and the top-quark forward-backward asymmetry in $t{\\bar t}$ production. I compare with the most recent Tevatron and LHC data, including at 13 TeV. I also present aNNLO results for cross sections and $p_T$ distributions in $t$-channel, $s$-channel, and $tW$-channel single-top production.

  6. Physics Beyond the Single Top Quark Observation

    SciTech Connect (OSTI)

    Heinson, A.P.; Collaboration, for the DZero

    2010-10-01

    In March 2009, the D0 Collaboration first observed the electroweak production of single top quarks at 5{sigma} significance. We measured the cross section for the combined s-channel and t-channel production modes, and set a lower limit on the CKM matrix element |V{sub tb}|. Since then, we have used the same dataset to measure the t-channel production mode independently, the combined cross section in the hadronically-decaying tau lepton final state, and the width and lifetime of the top quark, and we have set upper limits on contributions from anomalous flavor-changing neutral currents. This paper describes these new measurements, as presented at the 3rd International Workshop on Top Quark Physics, held in Brugge, Belgium, May 31-June 4, 2010.

  7. CDF/TOP/DOC/6548 Version 1.1

    E-Print Network [OSTI]

    CDF/TOP/DOC/6548 Version 1.1 July 1, 2003 Description of data samples for Top Group for Summer 2003 T electron and muon data sam- ples which will be used for Top group analysis results for Summer 2003 conferences. Up-to-date information on these samples is available from the Top Group Data page http://www-cdf.fnal.gov/internal/physics/top

  8. Recent Results of Top Quark Physics from the Tevatron

    E-Print Network [OSTI]

    R. Y. Peters; on behalf of the D0; CDF collaborations

    2015-07-09

    Twenty years after its discovery in 1995 by the CDF and D0 collaborations at the Tevatron proton-antiproton collider at Fermilab, the top quark still undergoes intensive studies at the Tevatron and the LHC at CERN. In this article, recent top quark physics results from CDF and D0 are reported. In particular, measurements of single top quark and double top quark production, the ttbar forward-backward asymmetry and the top quark mass are discussed.

  9. TOP-COP: Mining TOP-K Strongly Correlated Pairs in Large Databases MSIS Department, Rutgers University

    E-Print Network [OSTI]

    Xiong, Hui

    TOP-COP: Mining TOP-K Strongly Correlated Pairs in Large Databases Hui Xiong MSIS Department. To this end, we propose an alterna- tive task: mining the top-k strongly correlated pairs. In this paper, we an efficient algorithm, called TOP-COP to exploit this prop- erty to effectively prune many pairs even without

  10. A measurement of the top quark's charge

    SciTech Connect (OSTI)

    Unalan, Zeynep Gunay; /Michigan State U.

    2007-11-01

    The top quark was discovered in 1995 at the Fermilab National Accelerator Laboratory (Fermilab). One way to confirm if the observed top quark is really the top quark posited in the Standard Model (SM) is to measure its electric charge. In the Standard Model the top quark is the isospin partner of the bottom quark and is expected to have a charge of +2/3. However, an alternative 'exotic' model has been proposed with a fourth generation exotic quark that has the same characteristics, such as mass, as our observed top but with a charge of -4/3. This thesis presents the first CDF measurement of the top quark's charge via its decay products, a W boson and a bottom quark, using {approx} 1 fb{sup -1} of data. The data were collected by the CDF detector from proton anti-proton (p{bar p}) collisions at {radical}s = 1.96 TeV at Fermilab. We classify events depending on the charges of the bottom quark and associated W boson and count the number of events which appear 'SM-like' or 'exotic-like' with a SM-like event decaying as t {yields} W{sup +}b and an exotic event as t {yields} W{sup -}b. We find the p-value under the Standard Model hypothesis to be 0:35 which is consistent with the Standard Model. We exclude the exotic quark hypothesis at an 81% confidence level, for which we have chosen a priori that the probability of incorrectly rejecting the SM would be 1%. The calculated Bayes Factor (BF) is 2 x Ln(BF)=8.54 which is interpreted as the data strongly favors the Standard Model over the exotic quark hypothesis.

  11. TOP500 Supercomputers for November 2003

    SciTech Connect (OSTI)

    Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack; Simon, Horst D.

    2003-11-16

    22nd Edition of TOP500 List of World s Fastest Supercomputers Released MANNHEIM, Germany; KNOXVILLE, Tenn.; BERKELEY, Calif. In what has become a much-anticipated event in the world of high-performance computing, the 22nd edition of the TOP500 list of the worlds fastest supercomputers was released today (November 16, 2003). The Earth Simulator supercomputer retains the number one position with its Linpack benchmark performance of 35.86 Tflop/s (''teraflops'' or trillions of calculations per second). It was built by NEC and installed last year at the Earth Simulator Center in Yokohama, Japan.

  12. Variational generalization of free relativistic top

    E-Print Network [OSTI]

    Roman Matsyuk

    2014-07-25

    We prove that well known first-order (in spin, momentum, and space-time coordinates) equations of motion of relativistic top are equivalent to the third-order equations of Mathisson on the surface of the Mathisson-Pirani auxiliary constraint. We then consider these third-order equations in flat space-time with constant spin 4-vector and invent a Lagrange function for them. Allowing physical interpretation to be applied to the complete set of extremals yields a whole spectrum of spin-dependent effective 'proper mass' of the relativistic top.

  13. Top Quark Spin Correlations at the Tevatron

    SciTech Connect (OSTI)

    Head, Tim; /Manchester U.

    2010-07-01

    Recent measurements of the correlation between the spin of the top and the spin of the anti-top quark produced in proton anti-proton scattering at a center of mass energy of {radical}s = 1.96 Tev by the CDF and D0 collaborations are discussed. using up to 4.3 fb{sup -1} of data taken with the CDF and D0 detectors the spin correlation parameter C, the degree to which the spins are correlated, is measured in dileptonic and semileptonic final states. The measurements are found to be in agreement with Standard Model predictions.

  14. Building a Better Boosted Top Tagger

    E-Print Network [OSTI]

    Andrew J. Larkoski; Ian Moult; Duff Neill

    2015-02-22

    Distinguishing hadronically decaying boosted top quarks from massive QCD jets is an important challenge at the Large Hadron Collider. In this paper we use the power counting method to study jet substructure observables designed for top tagging, and gain insight into their performance. We introduce a powerful new family of discriminants formed from the energy correlation functions which outperform the widely used N-subjettiness. These observables take a highly non-trivial form, demonstrating the importance of a systematic approach to their construction.

  15. Single Top Production at the Tevatron

    E-Print Network [OSTI]

    A. Gresele

    2006-05-13

    We report on a search for Standard Model t-channel ans s-channel single top quark production in p-pbar collisions at a center of mass energy of 1.96 TeV. We use a data sample corresponding to 0.7 fb-1 recorded by the upgraded Collider Detector at Fermilab (CDFII) and a data sample corresponding to 370 pb-1 recorded by D0. Both CDF and D0 find no significant evidence for electroweak top quark production and set upper limits at the 95 % confidence level on the production cross section

  16. Effective Field Theory for Top Quark Physics

    E-Print Network [OSTI]

    Cen Zhang; Scott Willenbrock

    2010-08-18

    Physics beyond the standard model can affect top-quark physics indirectly. We describe the effective field theory approach to describing such physics, and contrast it with the vertex-function approach that has been pursued previously. We argue that the effective field theory approach has many fundamental advantages and is also simpler.

  17. TOP VALUEIN THE NATION --Kiplinger's Personal Finance

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    TOP VALUEIN THE NATION --Kiplinger's Personal Finance and The Princeton Review HOW TO FINANCE YOUR's public -- a price that says value. Many students look for ways to finance their cost of attendance. Binghamton can assist you with understanding financing options including student and parent loans

  18. SPA's Top 10 Summer Research Salary

    E-Print Network [OSTI]

    Kroll, Kristen L.

    09/08 SPA's Top 10 Summer Research Salary 1. Faculty with academic year appointments may expend is called Summer Research Salary (SRS) and it's charged to sponsored funds during the months June, July will be required to certify the salaries charged to these projects via a Personnel Activity Report (PAR or ePAR). 3

  19. Rigid Top Plate Electronics Feed-through

    E-Print Network [OSTI]

    Sample SupportRod Vessel Head Rigid Top Plate Electronics Feed-through Aluminum Standard Ultrasonic measurement assembly. For seismic frequencies, strains are measured on both the sample and aluminum standard and exchange of pore fluids independent of confining pressure. #12;1. Ends flat and parallel (length should = 2

  20. Spectrum generating algebra of the symmetric top

    E-Print Network [OSTI]

    R. Bijker; A. Leviatan

    1997-08-28

    We consider an algebraic treatment of a three-body system. We develop the formalism for a system of three identical objects and show that it provides a simultaneous description of the vibrational and rotational excitations of an oblate symmetric top.

  1. Measurement of Top-Quark Polarization in t-channel Single-Top Production

    E-Print Network [OSTI]

    Matthias Komm; for the CMS Collaboration

    2014-11-29

    The measurement of the top quark polarization, sensitive to the electroweak coupling structure, in t-channel single-top production is presented. Events are analyzed corresponding to an integrated luminosity of approximately $20~\\mathrm{fb^{-1}}$ recorded with the CMS detector during pp collisions at $\\sqrt{s}=8~\\mathrm{TeV}$. By requiring one isolated lepton (muon or electron), two jets, and missing transverse energy, an angular asymmetry, sensitive to the polarization of the top quark, is reconstructed in the top-quark rest frame. The corresponding angular asymmetry at parton level is inferred from data in a phase space with enhanced single-top t-channel candidates through unfolding. Remaining background contributions are estimated through a ML-fit and subtracted. A polarization of $P_{t}=0.82\\pm0.12\\mathrm{~(stat.)}\\pm0.32\\mathrm{~(syst.)}$ is measured assuming a spin-analyzing power of the charged lepton stemming from the top decay of $100\\%$.

  2. Top Incomes in the Long Run of History

    E-Print Network [OSTI]

    Atkinson, Anthony B.; Piketty, Thomas; Saez, Emmanuel

    2012-01-01

    in top income shares in Finland,” Atkinson, A. B. and T.Singapore Argentina Sweden Finland Norway Share of top 0.1U/L-shaped),1900- 2006 Sweden Finland Norway Spain Portugal

  3. Energy profile of b-jet for boosted top quarks

    E-Print Network [OSTI]

    Yoshio Kitadono

    2014-09-05

    We analyse the semileptonic decay of a polarised top-quark with a large velocity based on the perturbative QCD factorisation framework. Thanks to the factorisation and the spin decomposition, the production part and the decay part can be factorised and the spin dependence is introduced in the decay part. The decay part is converted to the top-jet function which describes the distribution of jet observables and the spin is translated to the helicity of the boosted top. Using this top-jet function, the energy profile of b-jet is investigated and it is turned out that the sub-jet energy for the helicity-minus top is accumulated faster than that for the helicity-plus top. This behaviour for the boosted top can be understood with the negative spin-analysing-power of b-quark in the polarised-top decay.

  4. Building America Top Innovations 2013 Profile - Zero Energy-Ready...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Top Innovations 2013 Profile - Zero Energy-Ready Single-Family Homes Building America Top Innovations 2013 Profile - Zero Energy-Ready Single-Family Homes Many...

  5. Top Quark Properties at the TeVatron

    E-Print Network [OSTI]

    Yvonne Peters for the CDF; D0 Collaborations

    2011-03-29

    Discovered in 1995 by CDF and D0 at the Fermilab Tevatron collider, the top quark remains interesting to test the Standard Model. Having collected more than 7 fb$^{-1}$ of integrated luminosity with both experiments until today, several top quark properties have been measured with increasing precision, while other properties have been investigated for the first time. In this article recent measurements of top quark properties from CDF and D0 are presented, using between 1 fb$^{-1}$ and 4.8 fb$^{-1}$ of data. In particular, the measurement of the top quark mass, the top quark width, the top antitop mass difference, a check of the electric charge of the top quark, measurements of the top antitop quark spin correlation and W helicity as well as a search for charged Higgs bosons are discussed.

  6. Top 3 Takeaways from the Deputy Energy Secretary's Beijing Speech...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Top 3 Takeaways from the Deputy Energy Secretary's Beijing Speech Top 3 Takeaways from the Deputy Energy Secretary's Beijing Speech April 14, 2015 - 12:27pm Addthis Deputy Energy...

  7. The 'America's Next Top Energy Innovator' Challenge Begins Today...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The 'America's Next Top Energy Innovator' Challenge Begins Today The 'America's Next Top Energy Innovator' Challenge Begins Today May 2, 2011 - 12:02pm Addthis Lasers used for...

  8. Building America Top Innovations 2013 Profile - Zero Energy-Ready...

    Energy Savers [EERE]

    Top Innovations 2013 Profile - Zero Energy-Ready Single-Family Homes Building America Top Innovations 2013 Profile - Zero Energy-Ready Single-Family Homes Many Building America...

  9. NETL's New Supercomputer Ranks Among the World's Top 100 | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Computer for Energy and the Environment (HPCEE) is not only on the TOP500 list as one of the top 100 supercomputers in the world--currently ranked at 55--but it is...

  10. NERSC's Hopper is Among World's Top 10 Fastest Computers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hopper Among World's Top 10 Fastest Computers Hopper Among World's Top 10 Fastest Computers One of only 10 Petaflops Systems Worldwide June 17, 2011 | Tags: Hopper, NERSC Linda Vu,...

  11. Measurement of the top quark pair production cross section in...

    Office of Scientific and Technical Information (OSTI)

    Measurement of the top quark pair production cross section in proton-proton collisions at sqrts13 TeV Citation Details In-Document Search Title: Measurement of the top quark...

  12. TOP500 Supercomputers for June 2003

    SciTech Connect (OSTI)

    Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack; Simon, Horst D.

    2003-06-23

    21st Edition of TOP500 List of World's Fastest Supercomputers Released MANNHEIM, Germany; KNOXVILLE, Tenn.;&BERKELEY, Calif. In what has become a much-anticipated event in the world of high-performance computing, the 21st edition of the TOP500 list of the world's fastest supercomputers was released today (June 23, 2003). The Earth Simulator supercomputer built by NEC and installed last year at the Earth Simulator Center in Yokohama, Japan, with its Linpack benchmark performance of 35.86 Tflop/s (teraflops or trillions of calculations per second), retains the number one position. The number 2 position is held by the re-measured ASCI Q system at Los Alamos National Laboratory. With 13.88 Tflop/s, it is the second system ever to exceed the 10 Tflop/smark. ASCIQ was built by Hewlett-Packard and is based on the AlphaServerSC computer system.

  13. TOP500 Supercomputers for November 2002

    SciTech Connect (OSTI)

    Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack; Simon, Horst D.

    2002-11-15

    20th Edition of TOP500 List of World's Fastest Supercomputers Released MANNHEIM, Germany; KNOXVILLE, Tenn.;&BERKELEY, Calif. In what has become a much-anticipated event in the world of high-performance computing, the 20th edition of the TOP500 list of the world's fastest supercomputers was released today (November 15, 2002). The Earth Simulator supercomputer installed earlier this year at the Earth Simulator Center in Yokohama, Japan, is with its Linpack benchmark performance of 35.86 Tflop/s (trillions of calculations per second) retains the number one position. The No.2 and No.3 positions are held by two new, identical ASCI Q systems at Los Alamos National Laboratory (7.73Tflop/s each). These systems are built by Hewlett-Packard and based on the Alpha Server SC computer system.

  14. The heavy top quark and supersymmetry

    SciTech Connect (OSTI)

    Hall, L.J. [Lawrence Berkeley Lab., CA (United States); [Univ. of California, Berkeley, CA (United States)

    1997-01-01

    Three aspects of supersymmetric theories are discussed: electroweak symmetry breaking, the issues of flavor, and gauge unification. The heavy top quark plays an important, sometimes dominant, role in each case. Additional symmetries lead to extensions of the Standard Model which can provide an understanding for many of the outstanding problems of particle physics. A broken supersymmetric extension of spacetime allows electroweak symmetry breaking to follow from the dynamics of the heavy top quark; an extension of isospin provides a constrained framework for understanding the pattern of quark and lepton masses; and a grand unified extension of the Standard Model gauge group provides an elegant understanding of the gauge quantum numbers of the components of a generation. Experimental signatures for each of these additional symmetries are discussed.

  15. Top Quark Production Measurements at ATLAS

    E-Print Network [OSTI]

    Robert Calkins; for the ATLAS Collaboration

    2011-10-05

    An overview of top quark production measurements using the ATLAS detector at the LHC is presented. Using 35 pb^-1 of data, we measured the ttbar cross-section in the lepton+jets channel to 13% precision and set limits on the cross-section for the all hadronic decay channel. The measurement in the dilepton channel was performed using 0.70 fb^-1 of data and was combined with the lepton+jets channel result for our most precise ttbar cross-section measurement of \\sigma(ttbar+X) =176 +- 5(stat) +13 -10 (syst) +-7(lumi). Single top production was also measured in the t-channel using 0.70 fb^-1 of data.

  16. Top 10 Problems on Massive Stars

    E-Print Network [OSTI]

    Cassio Barbosa; Donald Figer

    2005-10-18

    We have asked a number of researchers to compile their lists of the top 10 problems in the field of massive stars. This paper is a compilation of these lists. We attempted to survey observers and theorists and those studying all evolutionary stages in the lives of massive stars. Each list reflects the proposer's personal point of view, but hopefully, this compilation will motivate new young astronomers and begin a new series of discussion.

  17. Algebraic model of an oblate top

    E-Print Network [OSTI]

    R. Bijker; A. Leviatan

    1996-12-13

    We consider an algebraic treatment of a three-body system. In particular, we develop the formalism for a system of three identical objects and discuss an application to nonstrange baryon resonances which are interpreted as vibrational and rotational excitations of an oblate symmetric top. We derive closed expressions for a set of elementary form factors that appear in the calculation of both electromagnetic, strong and weak couplings of baryons.

  18. Painleve VI, Rigid Tops and Reflection Equation

    E-Print Network [OSTI]

    A. Levin; M. Olshanetsky; A. Zotov

    2006-06-01

    We show that the Painlev{\\'e} VI equation has an equivalent form of the non-autonomous Zhukovsky-Volterra gyrostat. This system is a generalization of the Euler top in $C^3$ and include the additional constant gyrostat momentum. The quantization of its autonomous version is achieved by the reflection equation. The corresponding quadratic algebra generalizes the Sklyanin algebra. As by product we define integrable XYZ spin chain on a finite lattice with new boundary conditions.

  19. Rare top quark decays in extended models

    SciTech Connect (OSTI)

    Gaitan, R.; Miranda, O. G.; Cabral-Rosetti, L. G.

    2006-09-25

    Flavor changing neutral currents (FCNC) decays t {yields} H0 + c, t {yields} Z + c, and H0 {yields} t + c-bar are discussed in the context of Alternative Left-Right symmetric Models (ALRM) with extra isosinglet heavy fermions where FCNC decays may take place at tree-level and are only suppressed by the mixing between ordinary top and charm quarks, which is poorly constraint by current experimental values. The non-manifest case is also briefly discussed.

  20. Review of recent top-quark LHC combinations

    E-Print Network [OSTI]

    Giorgio Cortiana; on behalf of the ATLAS; CMS collaborations within the TOPLHCWG

    2014-11-27

    A review of recent combinations of top-quark measurements performed at the LHC, by the ATLAS and CMS collaborations, is provided. The typical uncertainty categorisations, and their assumed correlation patterns are presented, together with the results of the combinations of the top-quark pair and single top-quark production cross sections, the top-quark mass, as well as of the $W$ boson polarisation and the charge asymmetry in $t\\bar t$ events.

  1. China Has Become a Top Global Warship Builder

    E-Print Network [OSTI]

    COLLINS, Gabe

    2013-01-01

    China builds its nuclear submarines) is a top candidate dueneeded to build nuclear submarines capable of surviv- ing in

  2. Announcing the "Top 10" List of Green Utility Leaders

    Office of Energy Efficiency and Renewable Energy (EERE)

    Find out if your utility made the National Renewable Energy Laboratory's list of top green power programs.

  3. TOP500 Sublist for November 2001

    SciTech Connect (OSTI)

    Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack J.; Simon,Horst D.

    2001-11-09

    18th Edition of TOP500 List of World's Fastest Supercomputers Released MANNHEIM, GERMANY; KNOXVILLE, TENN.; BERKELEY, CALIF. In what has become a much-anticipated event in the world of high-performance computing, the 18th edition of the TOP500 list of the world's fastest supercomputers was released today (November 9, 2001). The latest edition of the twice-yearly ranking finds IBM as the leader in the field, with 32 percent in terms of installed systems and 37 percent in terms of total performance of all the installed systems. In a surprise move Hewlett-Packard captured the second place with 30 percent of the systems. Most of these systems are smaller in size and as a consequence HP's share of installed performance is smaller with 15 percent. This is still enough for second place in this category. SGI, Cray and Sun follow in the number of TOP500 systems with 41 (8 percent), 39 (8 percent), and 31 (6 percent) respectively. In the category of installed performance Cray Inc. keeps the third position with 11 percent ahead of SGI (8 percent) and Compaq (8 percent).

  4. Top quark physics at the Tevatron

    SciTech Connect (OSTI)

    Antonio Sidoti

    2004-03-17

    After the successful Run I of the Tevatron (1992-1996),with the top quark discovery, both CDF and D0 experiments were extensively upgraded to meet the challenges of the Tevatron Run II collider. The energy of p{bar p} collisions at the Tevatron was increased from {radical}s = 1.8 TeV to {radical}s = 1.96 TeV. t{bar t} production cross section is expected to increase by a factor of {approx} 30%. Major upgrades in the Tevatron accelerator chain will increase the Run II instantaneous luminosity: the goal is to achieve L = 5 - 20 x 10{sup 31} cm{sup 2}s{sup -1} while the highest luminosity reached up to now (September 2003) is 5.2 x 10{sup 31} cm{sup 2} s{sup -1}. In this paper we will present the top quark properties measured by both CDF and D0 with the first physics-quality data collected during the Run II (March 2002-January 2003). First we will review t{bar t} cross section measurements in the various decay channels; then top quark mass measurements will be presented.

  5. A MEASUREMENT OF THE TOP QUARK'S CHARGE Zeynep Gunay Unalan

    E-Print Network [OSTI]

    Quigg, Chris

    advisor Kirsten Tollefson for her guidance, explaining to me the detector and trigger system and truly to confirm if the observed top quark is really the top quark posited in the Standard Model (SM) is to measure its electric charge. In the Standard Model the top quark is the isospin partner of the bottom quark

  6. TOP-K Correlation Computation Hui Xiong, Wenjun Zhou

    E-Print Network [OSTI]

    Xiong, Hui

    TOP-K Correlation Computation Hui Xiong, Wenjun Zhou Management Science and Information Systems, in this paper, we propose an alternative task: finding the top-k strongly correlated pairs. Conse- quently, we algorithm, called TOP-COP to exploit this property to effectively prune many pairs even without computing

  7. Top-down facilitation of visual recognition , K. S. Kassam*

    E-Print Network [OSTI]

    Schacter, Daniel

    Top-down facilitation of visual recognition M. Bar* , K. S. Kassam*§ , A. S. Ghuman*§¶ , J. Boshyan gradually promote the role of top-down processing in recognition, but how such facilitation is triggered object recognition by initiating top-down processes projected from orbitofrontal to visual cortex

  8. Top-kkk Preferences in High Dimensions Duke University

    E-Print Network [OSTI]

    Agarwal, Pankaj K.

    Top-kkk Preferences in High Dimensions Albert Yu Duke University syu@cs.duke.edu Pankaj K. Agarwal applications, users are interested only in a small num- ber (say, k) of "top" objects from a large set on preference top-k queries [9, 12, 13, 23, 38]. Motivated by applications in business analysis, Vlachou et al

  9. On Top-k Recommendation using Social Networks Xiwang Yang

    E-Print Network [OSTI]

    Liu, Yong

    On Top-k Recommendation using Social Networks Xiwang Yang , Harald Steck ,Yang Guo and Yong Liu). Social network based top-k recommendation, which recom- mends to a user a small number of items at a time, is not well studied. In this paper, we conduct a comprehensive study on improving the accuracy of top

  10. Certified Computer Algebra on top of an Interactive Theorem Prover

    E-Print Network [OSTI]

    Wiedijk, Freek

    Certified Computer Algebra on top of an Interactive Theorem Prover Cezary Kaliszyk and Freek, the Netherlands Abstract. We present a prototype of a computer algebra system that is built on top of a proof performed by the computer algebra system. Although our system is built on top of a proof assistant, we

  11. Certified Computer Algebra on top of an Interactive Theorem Prover

    E-Print Network [OSTI]

    Wiedijk, Freek

    Certified Computer Algebra on top of an Interactive Theorem Prover Abstract. We present a prototype of a computer algebra system that is built on top of a proof a computer algebra system on top of a proof assistant. For our prototype we chose the LCF-style theorem

  12. Searches for New Physics in Top Decays at D0

    SciTech Connect (OSTI)

    Pleier, Marc-Andre; /Brookhaven

    2011-08-01

    The Tevatron proton-antiproton collider at Fermilab with its centre of mass energy of 1.96 TeV allows for pair production of top quarks and the study of top quark decay properties. This report reflects the current status of measurements of the W boson helicity in top quark decays and the ratio of top quark branching fractions as well as searches for neutral current top quark decays and pair production of fourth generation t' quarks, performed by the D0 Collaboration utilising datasets of up to 5.4 fb{sup -1}.

  13. Collider Detector at Fermilab (CDF): Data from the Top Group's Top Quark Research

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    The Collider Detector at Fermilab (CDF) is a Tevatron experiment at Fermilab. The Tevatron, a powerful particle accelerator, accelerates protons and antiprotons close to the speed of light, and then makes them collide head-on inside the CDF detector. The CDF detector is used to study the products of such collisions. The CDF Physics Group at Fermilab is organized into six working groups, each with a specific focus. The Top group studies the properties of the top quark, the heaviest known fundamental particle. Their public web page makes data and numerous figures available from both CDF Runs I and II.

  14. Resonance Searches with an Updated Top Tagger

    E-Print Network [OSTI]

    Gregor Kasieczka; Tilman Plehn; Torben Schell; Thomas Strebler; Gavin P. Salam

    2015-03-19

    The performance of top taggers, for example in resonance searches, can be significantly enhanced through an increased set of variables, with a special focus on final-state radiation. We study the production and the decay of a heavy gauge boson in the upcoming LHC run. For constant signal efficiency, the multivariate analysis achieves an increased background rejection by up to a factor 30 compared to our previous tagger. Based on this study and the documentation in the Appendix we release a new HEPTopTagger2 for the upcoming LHC run. It now includes an optimal choice of the size of the fat jet, N-subjettiness, and different modes of Qjets.

  15. Search for top and bottom squarks

    SciTech Connect (OSTI)

    C. Rott

    2003-10-15

    Searches for the lightest scalar top quark {bar t}{sub 1} and scalar bottom quark {bar b}{sub 1} performed at LEP2 with a center-of-mass energy of up to {radical}s = 209 GeV and at Tevatron using data collected at {radical}s = 1.8 TeV during Run I and at {radical}s = 1.96 TeV during Run II, are discussed. Different possible decay modes were considered and no evidence for any such signal was observed. Exclusion limits were extracted.

  16. WIPP Receives Top Mine Safety Award

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAboutXuRod Hunt (208) 386-52542 12 BONNEVILLE POWERStillTop Mine

  17. Top 10 science stories of the year

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired Solar FuelTechnologyTel:FebruaryEIA's Today InTools AboutDepartmentTop

  18. Top 10 - DOE Directives, Delegations, and Requirements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDidDevelopment TopMetathesisSedimentsTechnologies | BlandineTools

  19. GreenTops | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar2-0057-EA Jump to:ofEniaElectricHydro ElectricGreen St.GreenTops Jump to:

  20. Top Crop Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EISTJThin Film Solar TechnologiesCFR 1201EnergyInformation ToolsTop

  1. Building America Top Innovations | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirley Ann JacksonDepartment|Marketing, LLC |EnergycurrentlyJuneEnergy This| Department ofTop

  2. Diesel prices top $4 per gallon

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNatural Gas UsageDiesel pricesDiesel prices top $4 per

  3. Top Partners and Higgs Boson Production

    E-Print Network [OSTI]

    Chien-Yi Chen; S. Dawson; I. M. Lewis

    2014-11-04

    The Higgs boson is produced at the LHC through gluon fusion at roughly the Standard Model rate. New colored fermions, which can contribute to $gg\\rightarrow h$, must have vector-like interactions in order not to be in conflict with the experimentally measured rate. We examine the size of the corrections to single and double Higgs production from heavy vector-like fermions in $SU(2)_L$ singlets and doublets and search for regions of parameter space where double Higgs production is enhanced relative to the Standard Model prediction. We compare production rates and distributions for double Higgs production from gluon fusion using an exact calculation, the low energy theorem (LET), where the top quark and the heavy vector-like fermions are taken to be infinitely massive, and an effective theory (EFT) where top mass effects are included exactly and the effects of the heavy fermions are included to ${\\cal O}(1/M^2_X)$. Unlike the LET, the EFT gives an extremely accurate description of the kinematic distributions for double Higgs production.

  4. Top marine predators track Lagrangian coherent structures

    E-Print Network [OSTI]

    E. Tew Kai; V. Rossi; J. Sudre; H. Weimerskirch; C. Lopez; E. Hernandez-Garcia; F. Marsac; V. Garcon

    2009-04-13

    Meso- and submesoscales (fronts, eddies, filaments) in surface ocean flow have a crucial influence on marine ecosystems. Their dynamics partly control the foraging behaviour and the displacement of marine top predators (tuna, birds, turtles, and cetaceans). In this work we focus on the role of submesoscale structures in the Mozambique Channel on the distribution of a marine predator, the Great Frigatebird. Using a newly developed dynamical concept, namely the Finite-Size Lyapunov Exponent (FSLE), we have identified Lagrangian coherent structures (LCSs) present in the surface flow in the Channel over a 2-month observation period (August and September 2003). By comparing seabirds' satellite positions with LCSs locations, we demonstrate that frigatebirds track precisely these structures in the Mozambique Channel, providing the first evidence that a top predator is able to track these FSLE ridges to locate food patches. After comparing bird positions during long and short trips, and different parts of these trips, we propose several hypotheses to understand how frigatebirds can follow these LCSs. The birds might use visual and/or olfactory cues and/or atmospheric current changes over the structures to move along these biological corridors. The birds being often associated to tuna schools around foraging areas, a thorough comprehension of their foraging behaviour and movement during the breeding season is crucial not only to seabirds' ecology but also to an appropriate ecosystemic approach of fisheries in the Channel.

  5. Top-quark mass measurements: Alternative techniques (LHC + Tevatron)

    E-Print Network [OSTI]

    Stefanie Adomeit

    2014-11-28

    Measurements of the top-quark mass employing alternative techniques are presented, performed by the D0 and CDF collaborations at the Tevatron as well as the ATLAS and CMS experiments at the LHC. The alternative methods presented include measurements using the lifetime of $B$-hadrons, the transverse momentum of charged leptons and the endpoints of kinematic distributions in top quark anti-quark pair ($t\\bar{t}$) final states. The extraction of the top-quark pole mass from the $t\\bar{t}$ production cross-section and the normalized differential $t\\bar{t}$ + 1-jet cross-section are discussed as well as the top-quark mass extraction using fixed-order QCD predictions at detector level. Finally, a measurement of the top-quark mass using events enhanced in single top t-channel production is presented.

  6. Top quark mass measurements at the D0 experiment

    E-Print Network [OSTI]

    Alexander Grohsjean

    2009-05-30

    The most recent measurements of the top quark mass at the D0 experiment are summarized. Different techniques and final states are used and the top quark mass is determined to be mtop=172.8+-1.6(stat+syst)GeV/c^2. In addition, a new, indirect measurement comparing the measured cross section to theoretical calculations is discussed. Both, the direct and the indirect measurement of the top quark mass are in good agreement.

  7. Measurements of Electroweak Top Production at the LHC

    E-Print Network [OSTI]

    Aniello Spiezia for the ATLAS; CMS Collaborations

    2012-12-03

    The production of a single top quark at LHC may occur through charged-current electroweak interactions, i.e. via three different processes: the s-channel exchange of a virtual W boson, the t-channel exchange of a virtual W boson and the associated production of a top quark and a W boson (tW). In this paper a review of the measurements of the single-top production made both at ATLAS and CMS will be shown.

  8. Jet Dipolarity: Top Tagging with Color Flow

    SciTech Connect (OSTI)

    Hook, Anson; Jankowiak, Martin; /SLAC /Stanford U., Phys. Dept.; Wacker, Jay G.; /SLAC

    2011-08-12

    A new jet observable, dipolarity, is introduced that can distinguish whether a pair of subjets arises from a color singlet source. This observable is incorporated into the HEPTopTagger and is shown to improve discrimination between top jets and QCD jets for moderate to high p{sub T}. The impressive resolution of the ATLAS and CMS detectors means that a typical QCD jet at the LHC deposits energy in {Omicron}(10-100) calorimeter cells. Such fine-grained calorimetry allows for jets to be studied in much greater detail than previously, with sophisticated versions of current techniques making it possible to measure more than just the bulk properties of jets (e.g. event jet multiplicities or jet masses). One goal of the LHC is to employ these techniques to extend the amount of information available from each jet, allowing for a broader probe of the properties of QCD. The past several years have seen significant progress in developing such jet substructure techniques. A number of general purpose tools have been developed, including: (i) top-tagging algorithms designed for use at both lower and higher p{sub T} as well as (ii) jet grooming techniques such as filtering, pruning, and trimming, which are designed to improve jet mass resolution. Jet substructure techniques have also been studied in the context of specific particle searches, where they have been shown to substantially extend the reach of traditional search techniques in a wide variety of scenarios, including for example boosted Higgses, neutral spin-one resonances, searches for supersymmetry, and many others. Despite these many successes, however, there is every reason to expect that there remains room for refinement of jet substructure techniques.

  9. Vision Machine & Fabrication Corp. Named Top Small Business Subcontrac...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vision Machine & Fabrication Corp. Named Top Small Business Subcontractor at Jefferson Lab for FY 2014 NEWPORT NEWS, VA, Sept. 10, 2015 - Jefferson Science Associates, the...

  10. TOP AND HIGGS PHYSICS AT THE HADRON COLLIDERS

    SciTech Connect (OSTI)

    Jabeen, Shabnam

    2013-10-20

    This review summarizes the recent results for top quark and Higgs boson measurements from experiments at Tevatron, a proton–antiproton collider at a center-of-mass energy of ? s =1 . 96 TeV, and the Large Hadron Collider, a proton–proton collider at a center- of-mass energy of ? s = 7 TeV. These results include the discovery of a Higgs-like boson and measurement of its various properties, and measurements in the top quark sector, e.g. top quark mass, spin, charge asymmetry and production of single top quark.

  11. Top 10 Vulnerabilities of Control Systems and Their Associated...

    Broader source: Energy.gov (indexed) [DOE]

    and Theif Associated Mitigations (2006) More Documents & Publications Introduction SCADA Security for Managers and Operators TOP 10 VULNERABILITIES OF CONTROL SYSTEMS AND...

  12. Secretary Chu Announces Second Round of "America's Next Top Energy...

    Energy Savers [EERE]

    Secretary Chu Announces Second Round of "America's Next Top Energy Innovator" on One Year Anniversary of the White House Startup America Initiative Secretary Chu Announces Second...

  13. Jefferson Lab Recognizes Top Small Business Subcontractor for...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Recognizes Top Small Business Subcontractor for 2008 groundbreaking D.G.S. President Ruth Seeley and her husband, Don, vice president and project manager, received the 2008...

  14. Building America Top Innovations Hall of Fame Profile ? Integration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    are essential to realizing the promise of high-performance homes. BUILDING AMERICA TOP INNOVATIONS HALL OF FAME PROFILE INNOVATIONS CATEGORY: 1. Advanced Technologies and...

  15. Northwest public utilities, BPA top five-year energy savings...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Northwest-public-utilities-BPA-top-five-year-energy-savings-target Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects &...

  16. NREL: News - NREL Staff Recognized for Top Innovations as Lab...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Release NR-2015 NREL Staff Recognized for Top Innovations as Lab Celebrates Record Patent Year DOE EERE Assistant Secretary David Danielson highlights "innovation culture" of...

  17. Valuing Green in the Appraisal Process - Building America Top...

    Energy Savers [EERE]

    America Top Innovation Real estate appraisers have historically faced challenges with green and energy efficient homes, both in identifying comparables and in supporting...

  18. Building America Solution Center - Building America Top Innovation...

    Energy Savers [EERE]

    America Top Innovation SCimagemale.jpg The Building America Solution Center is a Web-based tool connecting users to fast, free, and expert building science and energy...

  19. Building America Top Innovations 2014 Profile: HVAC Cabinet Air...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building Science Solutions Optimized Comfort Solutions HVAC Cabinet Air Leakage Test Method (top left) Building America teams evaluated several testing methods to identify...

  20. Dynamical electroweak symmetry breaking and the top quark

    SciTech Connect (OSTI)

    Chivukula, R.S. [Boston Univ., MA (United States)

    1997-01-01

    In this talk, I discuss theories of dynamical electroweak symmetry breaking, with emphasis on the implications of a heavy top quark on the weak interaction {rho} parameter.

  1. Secretary Chu Announces Second Round of "America's Next Top Energy...

    Broader source: Energy.gov (indexed) [DOE]

    of "America's Next Top Energy Innovator," a program that allows startup companies to license groundbreaking technologies developed by DOE's 17 national laboratories for 1,000...

  2. NREL's Bobi Garrett Named Top Industry Executive | Awards and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and partnerships at the Energy Department's National Renewable Energy Laboratory (NREL), was recognized by the Denver Business Journal as one of the region's top female...

  3. Sequoia ranked third in TOP500 list | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    according to the industry-standard Top500 list. Sequoia, which recently completed its transition to classified computing in support of NNSA's Stockpile Stewardship Program,...

  4. Vehicle Technologies Program: Goals, Strategies, and Top Accomplishmen...

    Office of Environmental Management (EM)

    Program (VTP) vtpgoals-strategies-accomp.pdf More Documents & Publications Advanced Combustion Engine R&D: Goals, Strategies, and Top Accomplishments Materials Technologies:...

  5. Large Higgs energy region in Higgs associated top pair production...

    Office of Scientific and Technical Information (OSTI)

    Large Higgs energy region in Higgs associated top pair production at the Linear Collider Citation Details In-Document Search Title: Large Higgs energy region in Higgs associated...

  6. Building America Top Innovations 2012: Advanced Framing Systems and Packages

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This Building America Top Innovations profile describes Building America research showing advanced 2x6, 24-inch on-center framing, single top plates, open headers, and 2-stud corners reduced board feet of lumber by more than 1,000 feet, cut energy use by 13%, and cut material and labor costs by more than $1,000 on a typical home.

  7. Processing Top N and Bottom N Queries Michael J. Carey

    E-Print Network [OSTI]

    Kemper, Alfons

    DBMS, which does not have built-in support for top N and bottom N queries, will end up wasting work.e., one without integrated support for top N and bottom N queries, would end up wasting work. We then show goal is to evaluate such queries with as little wasted work as possible. That is, if a query asks

  8. Mesa Top Photovoltaic Array SyStem SpecificationS

    E-Print Network [OSTI]

    electricity that array will provide: 7% environmental impact Annual carbon offset: 2.4 million pounds of CO2Mesa Top Photovoltaic Array SyStem SpecificationS System size: 750 kW (DC, estimated) Characteristics: Single axis tracker photovoltaics, ground mounted Annual output: 1,200 MWh Location: Top of South

  9. Top Polarization in Stop Production at the LHC

    E-Print Network [OSTI]

    G. Belanger; R. M. Godbole; L. Hartgring; I. Niessen

    2012-12-14

    We survey the expected polarization of the top produced in the decay of a scalar top quark, $\\tilde t \\rightarrow {\\tilde t}\\chi_i^0, i =1-2$. The phenomenology is quite interesting, since the expected polarization depends both on the mixing in the stop and neutralino sectors and on the mass differences between the stop and the neutralino. We find that a mixed stop behaves almost like a right-handed stop due to the larger hypercharge that enters the stop/top/gaugino coupling and that these polarisation effects disappear, when $m_{\\tilde t_1} \\approx m_t+m_{\\tilde\\chi^0_i}$. After a discussion on the expected top polarization from the decay of a scalar top quark, we focus on the interplay of polarization and kinematics at the LHC. We discuss different probes of the top polarization in terms of lab-frame observables. We find that these observables faithfully reflect the polarization of the parent top-quark, but also have a non-trivial dependence on the kinematics of the stop production and decay process. In addition, we illustrate the effect of top polarization on the energy and transverse momentum of the decay lepton in the laboratory frame. Our results show that both spectra are softened substantially in case of a negatively polarized top, particularly for a large mass difference between the stop and the neutralino. Thus, the search strategies, and the conclusions that can be drawn from them, depends not just on the mass difference $m_{\\tilde t} - m_{\\tilde\\chi_{i}^{0}}$ due to the usual kinematic effects but also on the effects of top polarization on the decay kinematics the extent of which depends in turn on the said mass difference.

  10. Tracking down hyper-boosted top quarks

    E-Print Network [OSTI]

    Larkoski, Andrew J; Selvaggi, Michele

    2015-01-01

    The identification of hadronically decaying heavy states, such as vector bosons, the Higgs, or the top quark, produced with large transverse boosts has been and will continue to be a central focus of the jet physics program at the Large Hadron Collider (LHC). At a future hadron collider working at an order-of-magnitude larger energy than the LHC, these heavy states would be easily produced with transverse boosts of several TeV. At these energies, their decay products will be separated by angular scales comparable to individual calorimeter cells, making the current jet substructure identification techniques for hadronic decay modes not directly employable. In addition, at the high energy and luminosity projected at a future hadron collider, there will be numerous sources for contamination including initial- and final-state radiation, underlying event, or pile-up which must be mitigated. We propose a simple strategy to tag such "hyper-boosted" objects that defines jets with radii that scale inversely proportion...

  11. Playing Tag with ANN: Boosted Top Identification with Pattern Recognition

    E-Print Network [OSTI]

    Leandro G. Almeida; Mihailo Backovic; Mathieu Cliche; Seung J. Lee; Maxim Perelstein

    2015-01-23

    Many searches for physics beyond the Standard Model at the Large Hadron Collider (LHC) rely on top tagging algorithms, which discriminate between boosted hadronic top quarks and the much more common jets initiated by light quarks and gluons. We note that the hadronic calorimeter (HCAL) effectively takes a "digital image" of each jet, with pixel intensities given by energy deposits in individual HCAL cells. Viewed in this way, top tagging becomes a canonical pattern recognition problem. With this motivation, we present a novel top tagging algorithm based on an Artificial Neural Network (ANN), one of the most popular approaches to pattern recognition. The ANN is trained on a large sample of boosted tops and light quark/gluon jets, and is then applied to independent test samples. The ANN tagger demonstrated excellent performance in a Monte Carlo study: for example, for jets with p_T in the 1100-1200 GeV range, 60% top-tag efficiency can be achieved with a 4% mis-tag rate. We discuss the physical features of the jets identified by the ANN tagger as the most important for classification, as well as correlations between the ANN tagger and some of the familiar top-tagging observables and algorithms.

  12. High Quality Down Lighting Luminaire with 73% Overall System Efficiency

    SciTech Connect (OSTI)

    Robert Harrison; Steven C. Allen; Joseph Bernier; Robert Harrison

    2010-08-31

    This report summarizes work to develop a high flux, high efficiency LED-based downlight at OSRAM SYLVANIA under US Department of Energy contract DE-FC26-08NT01582. A new high power LED and electronic driver were developed for these downlights. The LED achieved 100 lumens per watt efficacy and 1700 lumen flux output at a correlated color temperature of 3500K. The driver had 90% electrical conversion efficiency while maintaining excellent power quality with power factor >0.99, and total harmonic distortion <10%. Two styles of downlights using the LED and driver were shown to exceed the project targets for steady-state luminous efficacy and flux of 70 lumens per watt and 1300 lumens, respectively. Compared to similar existing downlights using compact fluorescent or LED sources, these downlights had much higher efficacy at nearly the same luminous flux.

  13. CALiPER Snapshot Report: Indoor LED Luminaires

    SciTech Connect (OSTI)

    2014-04-01

    Snapshot reports use data from DOE's LED Lighting Facts product list to compare the LED performance to standard technologies, and are designed to help lighting retailers, distributors, designers, utilities, energy efficiency program sponsors, and other stakeholders understand the current state of the LED market and its trajectory.

  14. Energy Department Announces Winners of Next Generation Luminaires...

    Energy Savers [EERE]

    for indoor and outdoor lighting during the LIGHTFAIR International trade show in New York. The competition, sponsored by the Energy Department, the Illuminating...

  15. UDC Develops Prototype High-Efficiency OLED Undercabinet Luminaire

    Broader source: Energy.gov [DOE]

    Universal Display Corporation (UDC) has demonstrated the real-world application of a novel lighting technology by developing two pre-prototype OLED undercabinet lighting systems that exceed 420 total lumens at an efficacy of more than 55 lm/W, with an estimated lifetime (LT70) in excess of 10,000 hours, and a color rendering index (CRI) greater than 85.

  16. LED Luminaire Lifetime: Recommendations For Testing and Reporting |

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematics AndBeryllium Disease | Department of0 Inspection BEFORE THE3, 2011:Kenneth G.KristenMarket

  17. Model Specification for LED Roadway Luminaires | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURING OFFICESpecialAPPENDIX F Wetlandsof Energy Model Repair SpecificationsLED

  18. Next Generation Luminaires Design Competition Announces 2014 Indoor Winners

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy Bills and Reduce Carbon PollutionZealand JoinsJune 1,ofInverter Next(BETO)|

  19. OLED Luminaire with Panel Integrated Drivers and Advanced Controls |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy Bills and ReduceNovember 2014Marketing2014) |D D O O E E / / H H G G

  20. Covered Product Category: Fluorescent Luminaires | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based Fuels|ProgramsLakeDepartmentEnergyEnterprise Servers

  1. Covered Product Category: Industrial Luminaires (High/Low Bay) | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based Fuels|ProgramsLakeDepartmentEnergyEnterprise ServersHot Foodof

  2. Covered Product Category: Light Fixtures (Luminaires) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based Fuels|ProgramsLakeDepartmentEnergyEnterprise ServersHot

  3. Covered Product Category: Suspended Fluorescent Luminaires | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based| Department of Energy Whole-Home Gas Tankless Water HeatersRoom

  4. System Reliability Model for Solid-State Lighting Luminaires | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing ToolInternational Affairs, Before theFebruary 1,7/109 Historical Perspectiveof Energy

  5. Next Generation Luminaire (NGL) Downlight Demonstration Project: St.

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nAand DOEDepartmentNew Jersey isDepartment ofInstitute * www.ofAnthony's

  6. Next Generation Luminaires Design Competition Announces 2013 Outdoor

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nAand DOEDepartmentNew Jersey isDepartment ofInstitute *

  7. Energy Department Announces Winners of Next Generation Luminaires(tm)

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n cEnergy (AZ,LocalEfficiencyCellulosic|Award Competition |Solid-State

  8. High Efficiency Driving Electronics for General Illumination LED Luminaires

    Office of Scientific and Technical Information (OSTI)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfate Reducing(Journal Article)lasers (Journal Article) |different|(Journal(Conference) |

  9. Low-Cost LED Luminaire for General Illumination

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURING OFFICE INDUSTRIALU.S.Leadership onProton Conductivity Lowpaul_fini@cree.com CREE

  10. Luminaires for Advanced Lighting in Education | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURING OFFICE INDUSTRIALU.S.LeadershipLumileds R&D Impacts Summary Lumileds

  11. DOE Publishes Report on Accelerated Life Testing of SSL Luminaires |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based| Department ofRefrigeratorsDepartment ofHeatDepartment ofDepartment of

  12. High-Performance OLED Panel and Luminaire | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing ProgramsDepartmentHigh-EfficiencyPatrick Hughesby

  13. System Reliability Model for Solid-State Lighting Luminaires | Department

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OF APPLICABLEStatutory Authority SustainX IncSheet),RenewableSweetSuccessof

  14. Report 23: Photometric Testing of White Tunable LED Luminaires | Department

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergyInterestedReplacement-2-A Wholesale Power Rate Schedule Replacement-2-AReplyDepartmentof

  15. RTI International Develops SSL Luminaire Reliability Model | Department of

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergyInterested PartiesBuildingBudget ||Department ofRequest forTools | DepartmentEnergy

  16. Next Generation Luminaires Design Competition Announces 2015 Winners |

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergyInterested Parties -DepartmentAvailable forSite | Department ofNewsletters

  17. LED LUMINAIRE LIFETIME: Recommendations for Testing and Reporting |

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergyInterested Parties - WAPA PublicLED ADOPTION REPORT LED ADOPTION REPORT PDF

  18. LED Luminaire Lifetime: Recommendations for Testing and Reporting

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergyInterested Parties - WAPA PublicLED ADOPTION REPORT LED ADOPTION REPORT PDFLED Lights

  19. High Efficiency Driving Electronics for General Illumination LED Luminaires

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (Journalvivo Low-DoseOptionsthroughput spectrometer forInnovationand

  20. Top quark production and properties at the Tevatron

    SciTech Connect (OSTI)

    Fiedler, Frank; /Munich U.

    2005-06-01

    The precise measurement of top quark production and properties is one of the primary goals of the Tevatron during Run II. The total t{bar t} production cross-section has been measured in a large variety of decay channels and using different selection criteria. Results from differential cross-section measurements and searches for new physics in t{bar t} production and top quark decays are available. Electroweak production of single top quarks has been searched for. The results from all these analyses, using typically 200 pb{sup -1} of data, are presented.

  1. Search for New Physics in Rare Top Decays

    E-Print Network [OSTI]

    Pratishruti Saha

    2014-11-27

    Top physics provides a fertile ground for new-physics searches. At present, most top observables appear to be in good agreement with the respective Standard Model predictions. However, in the case of decay modes that are suppressed in the Standard Model, new-physics contributions of comparable magnitude may exist and yet go unnoticed because their impact on the total decay width is small. Hence it is interesting to probe rare top decays. This analysis focuses on the decay $t \\to b \\bar b c$. Useful observables are identified and prospects for measuring new-physics parameters are examined.

  2. Probing top flavour-changing neutral couplings at TESLA

    E-Print Network [OSTI]

    J. A. Aguilar-Saavedra; T. Riemann

    2001-02-20

    We present a comprehensive analysis of the sensitivity of the TESLA e+ e- collider to top flavour-changing neutral couplings to the Z boson and photon. We study single top production and top decay processes, and we consider the cases without beam polarization, with only e- polarization and with e- and e+ polarization. We show that the use of the latter substantially enhances the sensitivity to discover or bound these vertices, and for some of the couplings the expected LHC limits could be improved by factors 2-14 for equal running times.

  3. Top-down modulation of hippocampal encoding activity as measured by high-resolution functional MRI

    E-Print Network [OSTI]

    2013-01-01

    D'Esposito, M. (2005). Top- down enhancement and suppressionformation – are modulated by top-down in?uences. Earlyunderstanding of the effects of top-down goal states on MTL

  4. California's Top Two Primary and the Challenge of Making Real Change

    E-Print Network [OSTI]

    Cornu, Sharon

    2015-01-01

    California’s Top Two Primary and the Challenge of MakingIt’s how I feel about the Top Two: it’s not going to improveor your productivity. The Top Two is reform of our political

  5. Why Voters May Have Failed to Reward Proximate Candidates in the 2012 Top Two Primary

    E-Print Network [OSTI]

    Ahler, Douglas; Citrin, Jack; Lenz, Gabriel S

    2015-01-01

    and Gabriel S. Lenz. 2014. “Do Top-Two Primaries ImproveTest of California’s 2012 Top-Two Primary. ” Bafumi, Joseph,Assessing California’s Top-Two Primary and Redistricting

  6. Top of Mind in Task-Based Environments and Choice Under Risk

    E-Print Network [OSTI]

    Zaidi, Farhan

    2010-01-01

    biases that influence what is top of mind for consumers inZinman. “Getting to the Top of Mind: How Reminders IncreaseTop of Mind in Task-Based Environments and Choice Under Risk

  7. Top-Down Influences on Local Networks: Basic Theory with Experimental Implications

    E-Print Network [OSTI]

    Srinivasan, Ramesh; Thorpe, Samuel; Nunez, Paul L

    2013-01-01

    lations and synchrony in top-down processing. Nat. Rev.functional coupling during top- down processing in a workingstate visual evoked potentials Top-down influences on local

  8. Top-down modification of bottom-up processes: selective grazing reduces macroalgal nitrogen uptake

    E-Print Network [OSTI]

    Bracken, MES; Stachowicz, J J

    2007-01-01

    flow and clear plastic tops to maximize light penetration.RC, Kohrs DG, Alberte RS (1996) Top-down im- pact through aSer Published January 25 Top-down modification of bottom-up

  9. The Top-Two, Take Two: Did Changing the Rules Change the Game in Statewide Contests?

    E-Print Network [OSTI]

    Kousser, Thad

    2015-01-01

    Assessing California’s Top-Two Primary and RedistrictingThe Top-Two, Take Two: Did Changing the Rules Change therules implemented by California’s top-two system change the

  10. Terascale Optimal PDE Simulations (TOPS) Center

    SciTech Connect (OSTI)

    Professor Olof B. Widlund

    2007-07-09

    Our work has focused on the development and analysis of domain decomposition algorithms for a variety of problems arising in continuum mechanics modeling. In particular, we have extended and analyzed FETI-DP and BDDC algorithms; these iterative solvers were first introduced and studied by Charbel Farhat and his collaborators, see [11, 45, 12], and by Clark Dohrmann of SANDIA, Albuquerque, see [43, 2, 1], respectively. These two closely related families of methods are of particular interest since they are used more extensively than other iterative substructuring methods to solve very large and difficult problems. Thus, the FETI algorithms are part of the SALINAS system developed by the SANDIA National Laboratories for very large scale computations, and as already noted, BDDC was first developed by a SANDIA scientist, Dr. Clark Dohrmann. The FETI algorithms are also making inroads in commercial engineering software systems. We also note that the analysis of these algorithms poses very real mathematical challenges. The success in developing this theory has, in several instances, led to significant improvements in the performance of these algorithms. A very desirable feature of these iterative substructuring and other domain decomposition algorithms is that they respect the memory hierarchy of modern parallel and distributed computing systems, which is essential for approaching peak floating point performance. The development of improved methods, together with more powerful computer systems, is making it possible to carry out simulations in three dimensions, with quite high resolution, relatively easily. This work is supported by high quality software systems, such as Argonne's PETSc library, which facilitates code development as well as the access to a variety of parallel and distributed computer systems. The success in finding scalable and robust domain decomposition algorithms for very large number of processors and very large finite element problems is, e.g., illustrated in [24, 25, 26]. This work is based on [29, 31]. Our work over these five and half years has, in our opinion, helped advance the knowledge of domain decomposition methods significantly. We see these methods as providing valuable alternatives to other iterative methods, in particular, those based on multi-grid. In our opinion, our accomplishments also match the goals of the TOPS project quite closely.

  11. USDOE Top-of-Rail Lubricant Project

    SciTech Connect (OSTI)

    Mohumad F. Alzoubi; George R. Fenske; Robert A. Erck; Amrit S. Boparai

    2002-02-01

    Lubrication of wheel/rail systems has been recognized for the last two decades as a very important issue for railroads. Energy savings and less friction and wear can be realized if a lubricant can be used at the wheel/rail interface. On the other hand, adverse influences are seen in operating and wear conditions if improper or excessive lubrication is used. Also, inefficiencies in lubrication need to be avoided for economic and environmental reasons. The top-of-rail (TOR) lubricant concept was developed by Texaco Corporation to lubricate wheels and rails effectively and efficiently. Tranergy Corporation has been developing its SENTRAEN 2000{trademark} lubrication system for the last ten years, and this revolutionary new high-tech on-board rail lubrication system promises to dramatically improve the energy efficiency, performance, safety, and track environment of railroads. The system is fully computer-controlled and ensures that all of the lubricant is consumed as the end of the train passes. Lubricant quantity dispensed is a function of grade, speed, curve, and axle load. Tranergy also has its LA4000{trademark} wheel and rail simulator, a lubrication and traction testing apparatus. The primary task of this project was collecting and analyzing the volatile and semivolatile compounds produced as the lubricant was used. The volatile organic compounds were collected by Carbotrap cartridges and analyzed by adsorption and gas chromatography/mass spectrometry (GC/MS). The semivolatile fraction was obtained by collecting liquid that dripped from the test wheel. The collected material was also analyzed by GC/MS. Both of these analyses were qualitative. The results indicated that in the volatile fraction, the only compounds on the Environmental Protection Agency's (EPA) Superfund List of Analytes detected were contaminants either in the room air or from other potential contamination sources in the laboratory. Similarly, in the semivolatile fraction none of the detected compounds are on the EPA's Superfund List of Analytes. The major compound in the semivolatile fraction is 1,2-propanediol, which was also found as the major component of the TOR lubricant before testing. Other compounds found in trace quantities either were present in the TOR lubricant or were small fragments from the polymeric component of the TOR lubricant. The second task for Argonne in this project was to investigate the effects of axle load, angle of attack, and quantity of lubricant on lateral friction forces, as well as the consumption time of the TOR lubricant. The second task was to collect and qualitatively identify any volatile and semivolatile compounds produced upon use of the TOR lubricant.

  12. Cotton response to over-the-top trifloxysulfuron sodium applications 

    E-Print Network [OSTI]

    Hoffman, Steven Matthew,1978-

    2003-01-01

    Envoke® (common name: trifloxysulfuron sodium), is a new sulfonylurea herbicide developed by Syngenta for over-the-top application to cotton. A two-year study was conducted with concurrent field and greenhouse experiments ...

  13. Building America Top Innovations 2012: Tankless Gas Water Heater Performance

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This Building America Top Innovations profile describes Building America field testing that shed light on how real-world water usage affects energy saving estimates of high-efficiency water heating systems.

  14. Building America Top Innovations 2012: EEBA Water Management Guide

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This Building America Top Innovations profile describes the DOE-sponsored Water Management Guide, which identifies durability issues and solutions for high-performance homes. The Water Management Guide has sold 15,000 copies since its first printing.

  15. Precision Top-Quark Mass Measurement at CDF

    E-Print Network [OSTI]

    Gomez-Ceballos, Guillelmo

    We present a precision measurement of the top-quark mass using the full sample of Tevatron ?s=1.96??TeV proton-antiproton collisions collected by the CDF II detector, corresponding to an integrated luminosity of ...

  16. Topping Turbines: Adding New Life to Older Plants 

    E-Print Network [OSTI]

    Cadrecha, M.

    1984-01-01

    An existing power plant can be repowered at a modest investment cost through a topping turbine installation. Essentially, this consists of replacing the existing old, low pressure boilers with new, high pressure boilers and adding a new, high...

  17. Top 100 Oil and Gas Fields of 2009

    Gasoline and Diesel Fuel Update (EIA)

    Top 100 Oil and Gas Fields of 2009 Introduction This supplement to the Energy Information Administration's summary of U.S. Crude Oil, Natural Gas, and Natural Gas Liquids Proved...

  18. Emmett receives top national award from Women in Nuclear | ornl...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ron Walli Communications 865.576.0226 Emmett receives top national award from Women in Nuclear ORNL retired researcher Peggy Emmett is the recipient of the 2014 U.S. Women in...

  19. Prof. Robinson named as an emerging top scientist in Materials...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Prof. Robinson named as an emerging top scientist in Materials Chemistry April 23rd, 2014 MSE Professor and emc2 faculty member, Richard Robinson, has been selected by the...

  20. Building America Top Innovations 2012: Unvented, Conditioned Crawlspaces

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This Building America Top Innovations profile describes Building America research which influenced code requirements by demonstrating that unvented, conditioned crawlspaces use 15% to 18% less energy for heating and cooling while reducing humidity over 20% in humid climates.

  1. Photoproduction of top in peripheral heavy ion collisions

    E-Print Network [OSTI]

    Spencer R. Klein; Joakim Nystrand; Ramona Vogt

    2001-07-09

    In relativistic heavy ion collisions, top quarks can be produced by photon-gluon fusion when a photon from the Weizs\\"acker-Williams virtual photon field of one nucleus interacts with a gluon in the other nucleus. Photoproduction with heavy ions at the Large Hadron Collider (LHC) will be the first accessible non-hadronic top production channel. We calculate the $t \\bar t$ photoproduction cross sections, pair mass and top quark rapidity distributions in peripheral heavy ion collisions. The cross sections are sensitive to the top quark charge and the large-$Q^2$ gluon distribution in the nucleus. We find a cross section of 94 pb in calcium-calcium collisions, leading to 190 pairs in a one month ($10^6$ sec) LHC run. We also find $p$Pb and $p$Ca cross sections of 5.8 and 3.4 pb respectively, resulting in 6 and 34 $t\\bar t$ pairs per month.

  2. Report of the 2005 Snowmass Top/QCD Working Group

    SciTech Connect (OSTI)

    Juste, A.; /Fermilab; Kiyo, Y.; /Aachen, Tech. Hochsch.; Petriello, F.; /Wisconsin U., Madison /Fermilab; Teubner, T.; /Liverpool U., Dept. Math.; Agashe, K.; Batra, P.; Baur, U.; Berger, C.F.; Cembranos, J.A.R.; Gehrmann-De Ridder, A.; Gehrmann, T.; Glover, E.W.N.; Godfrey, S.; Hoang, A.; Perelstein, M.; Sullivan, Z.; Tait, T.; Zhu, S.; /Johns

    2006-01-17

    This report discusses several topics in both top quark physics and QCD at an International Linear Collider (ILC). Issues such as measurements at the t tbar threshold, including both theoretical and machine requirements, and the determination of electroweak top quark couplings are reviewed. New results concerning the potential of a 500 GeV e+e collider for measuring Wtb couplings and the top quark Yukawa coupling are presented. The status of higher order QCD corrections to jet production cross sections, heavy quark form factors, and longitudinal gauge boson scattering, needed for percent-level studies at the ILC, are reviewed. A new study of the measurement of the hadronic structure of the photon at a gamma gamma collider is presented. The effects on top quark properties from several models of new physics, including composite models, Little Higgs theories, and CPT violation, are studied.

  3. A World's Top-10 X-ray Crystal Structure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A World's Top-10 X-ray Crystal Structure October 7, 2014 Bookmark and Share Philip Coppens An x-ray crystal structure solved by Philip Coppens has been chosen as one of the world's...

  4. Measurement of Single-top Quark Production with ATLAS Data

    E-Print Network [OSTI]

    J. L. Holzbauer; for the ATLAS Collaboration

    2011-11-14

    Single-top production processes have been studied using 0.7 fb-1 of data from 7 TeV center-of-mass energy proton-proton collisions collected with the ATLAS detector at the LHC. Single-top is electroweak top production and the standard model includes three production modes. Each contains a Wtb vertex, allowing the possibility of a direct measurement of the CKM matrix element |Vtb|. Single-top could also be sensitive to new physics, such as flavor changing neutral currents or heavy W' bosons. Using cut-based selections, a limit of production and production. For the t-channel measurement, both cut-based and neural network analyses are performed and the cross-section is measured to be 90 +32 -22 pb, where 65 +28 -19 pb is expected according to standard model.

  5. A table-top femtosecond time-resolved soft x-ray transient absorption spectrometer

    E-Print Network [OSTI]

    Loh, Zhi-Heng

    2008-01-01

    polytetrafluoroethylene (PTFE), has an internal diameter ofgas cell consists of a PTFE cylindrical top and a stainlesssteel base. The PTFE top has 150 ? m or 200 ? m diameter

  6. Advanced Combustion Engine R&D: Goals, Strategies, and Top Accomplishm...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Engine R&D: Goals, Strategies, and Top Accomplishments Advanced Combustion Engine R&D: Goals, Strategies, and Top Accomplishments advcombustiongoals.pdf More Documents &...

  7. Social Media and Messages That Matter: Top Tips and Tools Peer...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Social Media and Messages That Matter: Top Tips and Tools Peer Exchange Call Social Media and Messages That Matter: Top Tips and Tools Peer Exchange Call July 9...

  8. Single-top hadroproduction in association with a W boson

    E-Print Network [OSTI]

    S. Frixione; E. Laenen; P. Motylinski; B. Webber; C. D. White

    2008-05-20

    We present the calculation of the Wt single-top production channel to next-to-leading order in QCD, interfaced with parton showers within the MC@NLO formalism. This channel provides a complementary way of investigating the properties of the Wtb vertex, with respect to the s- and t-channels. We pay special attention to the separation of this process from top quark pair production.

  9. A new scoring function for top-down spectral deconvolution

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kou, Qiang; Wu, Si; Liu, Xiaowen

    2014-12-18

    Background: Top-down mass spectrometry plays an important role in intact protein identification and characterization. Top-down mass spectra are more complex than bottom-up mass spectra because they often contain many isotopomer envelopes from highly charged ions, which may overlap with one another. As a result, spectral deconvolution, which converts a complex top-down mass spectrum into a monoisotopic mass list, is a key step in top-down spectral interpretation. Results: In this paper, we propose a new scoring function, L-score, for evaluating isotopomer envelopes. By combining L-score with MS-Deconv, a new software tool, MS-Deconv+, was developed for top-down spectral deconvolution. Experimental results showedmore »that MS-Deconv+ outperformed existing software tools in top-down spectral deconvolution. Conclusions: L-score shows high discriminative ability in identification of isotopomer envelopes. Using L-score, MS-Deconv+ reports many correct monoisotopic masses missed by other software tools, which are valuable for proteoform identification and characterization.« less

  10. A new scoring function for top-down spectral deconvolution

    SciTech Connect (OSTI)

    Kou, Qiang [Indiana Univ.-Purdue Univ. Indianapolis, Indianapolis, IN (United States); Wu, Si [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Liu, Xiaowen [Indiana Univ. School of Medicine, Indianapolis, IN (United States)

    2014-12-18

    Background: Top-down mass spectrometry plays an important role in intact protein identification and characterization. Top-down mass spectra are more complex than bottom-up mass spectra because they often contain many isotopomer envelopes from highly charged ions, which may overlap with one another. As a result, spectral deconvolution, which converts a complex top-down mass spectrum into a monoisotopic mass list, is a key step in top-down spectral interpretation. Results: In this paper, we propose a new scoring function, L-score, for evaluating isotopomer envelopes. By combining L-score with MS-Deconv, a new software tool, MS-Deconv+, was developed for top-down spectral deconvolution. Experimental results showed that MS-Deconv+ outperformed existing software tools in top-down spectral deconvolution. Conclusions: L-score shows high discriminative ability in identification of isotopomer envelopes. Using L-score, MS-Deconv+ reports many correct monoisotopic masses missed by other software tools, which are valuable for proteoform identification and characterization.

  11. Observation of the top quark with the DO detector

    SciTech Connect (OSTI)

    Hadley, N.J. [Univ. of Maryland, College Park, MD (United States)

    1997-01-01

    The DO Collaboration reports on the observation of the top quark in p{bar p} collisions at {radical}s = 1.8 TeV at the Fermilab Tevatron. We measure the top quark mass to be 199{sub -21}{sup -19}(stat){sub -21}{sup +14}(syst.) GeV/c{sup 2} and its production cross section to be 6.4 {+-}2.2 pb. Our result is based on approximately 50 pb{sup -1} of data. We observe 17 events with an expected background of 3.8 {+-} 0.6 events. The probability of an upward fluctuation of the background to produce the observed signal is 2 x 10{sup -6} (equivalent to 4.6 standard deviations). The kinematic properties of the events are consistent with top quark decay, and the distribution of events across the seven decay channels is consistent with the Standard Model top quark branching fractions. We describe the analysis that led to the observation of the top quark as well as the properties of the top quark events.

  12. Prognostication of prostate cancer based on TOP2A protein and gene assessment: TOP2A in prostate cancer

    E-Print Network [OSTI]

    2013-01-01

    E, Ring M, Sheils O, Loftus B, O'Leary J: Topoisomerase II-?C, Magee H, Loftus B, O'Leary JJ, Sheils O: Low-Level TOP2A

  13. CDF/PHYS/TOP/PUBLIC/10776 Search for top+jet resonances in tt+jet(s) at CDF.

    E-Print Network [OSTI]

    Quigg, Chris

    CDF CDF/PHYS/TOP/PUBLIC/10776 Search for top+jet resonances in t¯t+jet(s) at CDF. The CDF to a resonance in the ¯t/t+jet system of t¯t+extra jet events. We use events with exactly one lepton, missing transverse energy and at least five jets in data with an integrated luminosity of 8.7 fb-1 . We find the data

  14. Top quark physics at the Tevatron results and prospects

    SciTech Connect (OSTI)

    K. Sliwa

    2002-10-16

    The methodology of CDF and D0 top quark analyses and their underlying assumptions are summarized. The CDF and D0 top mass averages, obtained from measurements in several channels and based on about 100 pb{sup -1} of data from p{bar p} collisions at {radical}s = 1.8 TeV collected by each experiment in Run-I, are: M{sub t} = 176.1 {+-} 4.0(stat) {+-} 5.1(syst) GeV/c{sup 2} and M{sub t} = 172.1 {+-} 5.2(stat) {+-} 4.9(syst) Gev/C{sup 2}, respectively. The combined Tevatron measurement of the top quark mass is M{sub t} = 174.3 {+-} 3.2(stat) {+-} 4.0(syst) GeV/c{sup 2}. The CDF measurement of the t{bar t} cross section (assuming M{sub t} = 175 GeV/c{sup 2}) is {sigma}{sub tt} = 6.5 {+-} {sub 1.4}{sup 1.6} pb, and the D0 value (assuming M{sub t} = 172.1 GeV/c{sup 2}) is {sigma}{sub tt} = 5.9 {+-} 1.7 pb. In anticipation of much larger statistics, prospects for top physics in Tevatron Run-II are summarized. The fact that top quark analyses are among the best windows to physics beyond the Standard Model is emphasized.

  15. Top quark mass measurement using the template method at CDF

    SciTech Connect (OSTI)

    Aaltonen, T; Alvarez Gonzalez, B; Amerio, S; Amidei, D; Anastassov, A; Annovi, A; Antos, J; Apollinari, G; Appel, J A; Apresyan, A; Arisawa, T

    2011-06-03

    We present a measurement of the top quark mass in the lepton+jets and dilepton channels of tt? decays using the template method. The data sample corresponds to an integrated luminosity of 5.6 fb-1 of pp? collisions at Tevatron with ?s = 1.96 TeV, collected with the CDF II detector. The measurement is performed by constructing templates of three kinematic variables in the lepton+jets and two kinematic variables in the dilepton channel. The variables are two reconstructed top quark masses from different jets-to-quarks combinations and the invariant mass of two jets from the W decay in the lepton+jets channel, and a reconstructed top quark mass and mT2, a variable related to the transverse mass in events with two missing particles, in the dilepton channel. The simultaneous fit of the templates from signal and background events in the lepton+jets and dilepton channels to the data yields a measured top quark mass of Mtop = 172.1±1.1 (stat)±0.9 (syst) GeV/c2.

  16. Top quark induced effective potential in a composite Higgs model

    E-Print Network [OSTI]

    Maarten Golterman; Yigal Shamir

    2015-05-13

    We consider non-perturbative aspects of a composite Higgs model that serves as a prototype for physics beyond the Standard Model, in which a new strongly interacting sector undergoes chiral symmetry breaking, and generates the Higgs particle as a pseudo Nambu-Goldstone boson. In addition, the top quark couples linearly to baryons of the new strong sector, thereby becoming partially composite. We study the dynamics leading to the top quark Yukawa coupling as well as the top quark contribution to the effective potential for the Higgs, obtaining expressions for these couplings in terms of baryonic correlation functions in the underlying strongly interacting theory. We then show that a large-N limit exists in which the top quark contribution to the Higgs effective potential overcomes that of the weak gauge bosons, inducing electroweak symmetry breaking. The same large-N limit also suggests that the baryons that couple to the top quark may be relatively light. This composite Higgs model, and similar ones, can be studied on the lattice with the methods developed for lattice QCD.

  17. A top quark mass measurement using a matrix element method

    SciTech Connect (OSTI)

    Linacre, Jacob Thomas; /Oxford U.

    2010-02-01

    A measurement of the mass of the top quark is presented, using top-antitop pair (t{bar t}) candidate events for the lepton+jets decay channel. The measurement makes use of Tevatron p{bar p} collision data at centre-of-mass energy {radical}s = 1.96 TeV, collected at the CDF detector. The top quark mass is measured by employing an unbinned maximum likelihood method where the event probability density functions are calculated using signal (t{bar t}) and background (W+jets) matrix elements, as well as a set of parameterised jet-to-parton mapping functions. The likelihood function is maximised with respect to the top quark mass, the fraction of signal events, and a correction to the jet energy scale (JES) of the calorimeter jets. The simultaneous measurement of the JES correction ({Delta}{sub JES}) provides an in situ jet energy calibration based on the known mass of the hadronically decaying W boson. Using 578 lepton+jets candidate events corresponding to 3.2 fb{sup -1} of integrated luminosity, the top quark mass is measured to be m{sub t} = 172.4 {+-} 1.4 (stat+{Delta}{sub JES}) {+-} 1.3 (syst) GeV=c{sup 2}, one of the most precise single measurements to date.

  18. Fuel Technologies: Goals, Strategies, and Top Accomplishments; Vehicle Technologies Program (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-04-01

    Fact sheet describes the top accomplishments, goals, and strategies of DOE's Fuel Technologies sub program.

  19. Materials Technologies: Goals, Strategies, and Top Accomplishments (Brochure), Vehicle Technologies Program (VTP)

    Broader source: Energy.gov [DOE]

    Document details the goals, strategies, and top accomplishments of DOE's Materials Technologies subprogram.

  20. Top Five Service Recommendations February 2013 1 IT Service Management Board

    E-Print Network [OSTI]

    Queitsch, Christine

    Top Five Service Recommendations February 2013 1 IT Service Management Board Top Five Service Kelli Trosvig in autumn 2012. The SMB was charged with creating, by February 2013, a "top five list presented to Kelli Trosvig on February 26, 2013. The top five service recommendations are: 1. Teaching

  1. Vehicle Technologies Program: Goals, Strategies, and Top Accomplishments (Brochure), Vehicle Technologies Program (VTP)

    Broader source: Energy.gov [DOE]

    Fact sheet describes the Vehicle Technologies Program and its goals, strategies and top accomplishments.

  2. Measurements of the top quark mass at the tevatron

    E-Print Network [OSTI]

    Oleg Brandt; for the CDF Collaboration; for the D0 Collaboration

    2012-04-04

    The mass of the top quark (\\mtop) is a fundamental parameter of the standard model (SM). Currently, its most precise measurements are performed by the CDF and D0 collaborations at the Fermilab Tevatron $p\\bar p$ collider at a centre-of-mass energy of $\\sqrt s=1.96 \\TeV$. We review the most recent of those measurements, performed on data samples of up to 8.7 \\fb\\ of integrated luminosity. The Tevatron combination using up to 5.8 fb$^{-1}$ of data results in a preliminary world average top quark mass of $m_{\\rm top} = 173.2 \\pm 0.9$ GeV. This corresponds to a relative precision of about 0.54%. We conclude with an outlook of anticipated precision the final measurement of \\mtop at the Tevatron.

  3. Measurements of the top quark mass at the tevatron

    E-Print Network [OSTI]

    Brandt, Oleg

    2012-01-01

    The mass of the top quark (\\mtop) is a fundamental parameter of the standard model (SM). Currently, its most precise measurements are performed by the CDF and D0 collaborations at the Fermilab Tevatron $p\\bar p$ collider at a centre-of-mass energy of $\\sqrt s=1.96 \\TeV$. We review the most recent of those measurements, performed on data samples of up to 8.7 \\fb\\ of integrated luminosity. The Tevatron combination using up to 5.8 fb$^{-1}$ of data results in a preliminary world average top quark mass of $m_{\\rm top} = 173.2 \\pm 0.9$ GeV. This corresponds to a relative precision of about 0.54%. We conclude with an outlook of anticipated precision the final measurement of \\mtop at the Tevatron.

  4. Recent top quark production results from the Tevatron

    E-Print Network [OSTI]

    Oleg Brandt

    2015-04-18

    In this article, I review recent measurements of the production of the top quark in $p\\bar p$ collisions at a centre-of-mass energy of $\\sqrt s=1.96$~TeV in Run II of the Fermilab Tevatron Collider, recorded by the CDF and D0 Collaborations. I will present the Tevatron combination of measurements of the $t\\bar t$ production cross section and its differential measurement, the first evidence for and observation of the production of single top quarks in the $s$-channel, as well the final Tevatron combination of the production of single top quarks the $s$- and $t$-channels. Furthermore, I will review the measurements of the forward-backward asymmetry in $t\\bar t$ events, which can be experimentally uniquely accessed in the $CP$-invariant $p\\bar p$ initial state at the Tevatron, and conclude with the measurements of this asymmetry in the $b\\bar b$ system.

  5. W and Anomalous Single Top Production at HERA

    E-Print Network [OSTI]

    E. Rizvi; for the H1 Collabortion

    2008-07-22

    The analysis of $W$ production and the search for anomalous single top production is performed with the H1 detector at HERA with an integrated luminosity of 0.5 fb$^{-1}$, consisting of the complete high energy data from the HERA programme. Production cross section measurements of single $W$ production, as well as $W$ polarisation fractions in events containing isolated leptons and missing transverse momentum are also presented. In the context of a search for single top production an upper limit on the top production cross section $\\sigma_{ep\\to etX} < 0.16$ pb is established at the 95% confidence level, corresponding to an upper bound on the anomalous magnetic coupling $\\kappa_{tu\\gamma} < 0.14$.

  6. Measurement of the top quark mass in the dilepton channel

    E-Print Network [OSTI]

    Baringer, Philip S.; Abbott, B.; Abolins, M.; Abramov, V.; Acharya, B. S.; Adam, I.; Adams, D. L.; Adams, M.; Ahn, S.; Aihara, H.

    1999-07-14

    radiative corrections, the value of the top quark mass affects predic- tions of the standard model for many processes. For ex- ample, the prediction for the mass of the W boson varies by approximately 7 MeV1 for every 1 GeV change in the mass of the top... subdetectors that measure the trajectories of charged par- ticles: a vertex drift chamber, a transition radiation detector, a central drift chamber, and two forward drift chambers. These chambers also measure ionization to identify tracks from single charged...

  7. The Assembly of the Belle II TOP Counter

    E-Print Network [OSTI]

    Boqun Wang; for the Belle II PID Group

    2015-01-13

    A new type of ring-imaging Cherenkov counter, called TOP counter, has been developed for particle identification at the Belle II experiment to run at the SuperKEKB accelerator in KEK, Japan. The detector consists of 16 identical modules arranged azimuthally around the beam line. The assembly procedure for a TOP module is described. This procedure includes acceptance testing of the quartz mirror, prism, and quartz bar radiators. The acceptance tests include a chip search and measurements of bulk transmittance and total internal reflectance. The process for aligning and gluing the optical components together is described.

  8. Measurements of the Top Quark Pair-Production Cross Section

    E-Print Network [OSTI]

    Frank-Peter Schilling

    2013-02-19

    Measurements of the inclusive and differential cross section for the production of top quark pairs in proton-(anti)proton collision at center-of-mass energies of 1.96, 7.0 and 8.0 TeV are presented and compared with the latest theory predictions and Monte-Carlo models. In addition, first measurements of the production of top quark pairs in association with additional jets or with a boson are highlighted. All measurements are in good agreement with the Standard Model.

  9. Dateline Los Alamos: Top science news of 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HAB Packet HanfordDOEDaniel Shechtman andDarkIDDatabasesMake ItTopTop

  10. Top Low- or No-Cost Improvements | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing ToolInternational Affairs,Department ofARPA-E Top 10 Things You Didn'tTopFive Things

  11. Top quark mass measurement using the template method at CDF

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Aaltonen, T

    2011-06-03

    We present a measurement of the top quark mass in the lepton+jets and dilepton channels of t$\\bar{t}$ decays using the template method. The data sample corresponds to an integrated luminosity of 5.6 fb-1 of p$\\bar{p}$ collisions at Tevatron with ?s = 1.96 TeV, collected with the CDF II detector. The measurement is performed by constructing templates of three kinematic variables in the lepton+jets and two kinematic variables in the dilepton channel. The variables are two reconstructed top quark masses from different jets-to-quarks combinations and the invariant mass of two jets from the W decay in the lepton+jets channel, and amore »reconstructed top quark mass and mT2, a variable related to the transverse mass in events with two missing particles, in the dilepton channel. The simultaneous fit of the templates from signal and background events in the lepton+jets and dilepton channels to the data yields a measured top quark mass of Mtop = 172.1±1.1 (stat)±0.9 (syst) GeV/c2.« less

  12. SchoolFEFLOW Exercise Salt Intrusion From Top

    E-Print Network [OSTI]

    Kornhuber, Ralf

    Summer SchoolFEFLOW® Exercise Salt Intrusion From Top Vertical cross section #12;Summer SchoolSalt refinement (via Rubberbox and Border Options) FEFLOW Mesh Generation Height approx. 100 m #12;Summer SchoolSalt time stepping, FE/BE time integration Final time: 36500 days (100 years) #12;Summer SchoolSalt

  13. Building America Top Innovations 2012: National Residential Efficiency Measures Database

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This Building America Top Innovations profile describes the DOE-sponsored National Residential Efficiency Measures Database, which contains performance characteristics and cost estimates for nearly 3,000 energy retrofit measures. To date, it is used in four prominent DOE software packages to help optimize energy-efficiency recommendations.

  14. Observation of Electroweak Single Top-Quark Production

    E-Print Network [OSTI]

    Xie, Si

    We report the observation of single top-quark production using 3.2??fb[superscript -1] of pp? collision data with ?s=1.96??TeV collected by the Collider Detector at Fermilab. The significance of the observed data is 5.0 ...

  15. Direct Top-Quark Width Measurement at CDF

    E-Print Network [OSTI]

    Bauer, Gerry P.

    We present a measurement of the top-quark width in the lepton+jets decay channel of tt? events produced in pp? collisions at Fermilab’s Tevatron collider and collected by the CDF II detector. From a data sample corresponding ...

  16. Precision Top-Quark Mass Measurements at CDF

    SciTech Connect (OSTI)

    Aaltonen, T.; Alvarez Gonzalez, B.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Appel, J.A.; Arisawa, T.; Artikov, A.; /Dubna, JINR /Texas A-M

    2012-07-01

    We present a precision measurement of the top-quark mass using the full sample of Tevatron {radical}s = 1.96 TeV proton-antiproton collisions collected by the CDF II detector, corresponding to an integrated luminosity of 8.7 fb{sup -1}. Using a sample of t{bar t} candidate events decaying into the lepton+jets channel, we obtain distributions of the top-quark masses and the invariant mass of two jets from the W boson decays from data. We then compare these distributions to templates derived from signal and background samples to extract the top-quark mass and the energy scale of the calorimeter jets with in situ calibration. The likelihood fit of the templates from signal and background events to the data yields the single most-precise measurement of the top-quark mass, mtop = 172.85 {+-} 0.71 (stat) {+-} 0.85 (syst) GeV/c{sup 2}.

  17. Top-Down XML Keyword Query Processing Junfeng Zhou1

    E-Print Network [OSTI]

    New South Wales, University of

    keyword query w.r.t. LCA/SLCA/ELCA semantics. By "top-down", we mean that we visit all common ancestor (CA to define meaningful results, for which the basic semantics is Lowest Common Ancestor (LCA). Based on LCA, the most widely adopted query semantics are Exclusive LCA (ELCA) [3,7,10,23,27] and Smallest LCA (SLCA) [3

  18. Top quark mass measurement using the template method at CDF

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Aaltonen, T [Helsinki Inst. of Phys.; Alvarez Gonzalez, B [Oviedo U.; Cantabria Inst. of Phys.; Amerio, S [INFN, Padua; Amidei, D [Michigan U.; Anastassov, A [Northwestern U.; Annovi, A [Frascati; Antos, J [Comenius U.; Apollinari, G [Fermilab; Appel, J A [Fermilab; Apresyan, A [Purdue U.; Arisawa, T [Waseda U.; Dubna, JINR

    2011-06-03

    We present a measurement of the top quark mass in the lepton+jets and dilepton channels of tt? decays using the template method. The data sample corresponds to an integrated luminosity of 5.6 fb-1 of pp? collisions at Tevatron with ?s = 1.96 TeV, collected with the CDF II detector. The measurement is performed by constructing templates of three kinematic variables in the lepton+jets and two kinematic variables in the dilepton channel. The variables are two reconstructed top quark masses from different jets-to-quarks combinations and the invariant mass of two jets from the W decay in the lepton+jets channel, and a reconstructed top quark mass and mT2, a variable related to the transverse mass in events with two missing particles, in the dilepton channel. The simultaneous fit of the templates from signal and background events in the lepton+jets and dilepton channels to the data yields a measured top quark mass of Mtop = 172.1±1.1 (stat)±0.9 (syst) GeV/c2.

  19. Export Controls "Top Ten" List Considerations for All University Employees

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Export Controls "Top Ten" List Considerations for All University Employees 1. Export control laws various aspects of export controls: · Department of Commerce for civilian and "dual-use" technologies sanctions. 3. There are two kinds of exports: · Physical shipments of technology and equipment to a foreign

  20. Search for single top quark production at LEP2

    E-Print Network [OSTI]

    Wilson, Graham Wallace; OPAL Collaboration; Abbiendi, G.; Ainsley, C.; Å kesson, P.F.; Alexander, G.; Allison, J.; Anagnostou, G.; Anderson, K.J.; Arcelli, S.; Asai, S.; Axen, D.; Azuelos, G.; Bailey, I.

    2001-11-29

    for the FCNC process e^+e^??tc(u)?bWc(u). This analysis is sensitive to the leptonic and the hadronic decay modes of the W boson. No evidence for a FCNC process is observed. Upper limits at the 95% confidence level on the single top production cross...

  1. MECHANICS OF MATERIALS: TOP-DOWN APPROACHES TO FRACTUREp

    E-Print Network [OSTI]

    Hutchinson, John W.

    MECHANICS OF MATERIALS: TOP-DOWN APPROACHES TO FRACTUREp J. W. HUTCHINSON1 { and A. G. EVANS2 1) AbstractÐThe utility and robustness of the mechanics of materials is illustrated through a review. All rights reserved. Keywords: Mechanics of materials; Mechanical properties; Fracture and fracture

  2. Search the Blog: Top 10 Green Building Trends for 2010

    E-Print Network [OSTI]

    . It focuses on the concept of net metering which is the idea of taking excess energy produced by alternative add alternative energy production to supply the energy needs. Basically, if you can keep moreSearch the Blog: Search Jan 12 Top 10 Green Building Trends for 2010 by JTilley in Energy

  3. Top quark and higgs physics at the tevatron

    SciTech Connect (OSTI)

    Yao, WeiMing

    2004-10-01

    This is a writeup of my lectures given at the International Workshop on Frontiers of High Energy Physics, held at CCAST, Beijing, China during July 2-10. I discuss some basic experimental techniques for studying the Top quark and Higgsboson at the Tevatron, and review some recent results from CDF and D0 and their future prospects.

  4. Building America Top Innovations 2012: Outside Air Ventilation Controller

    SciTech Connect (OSTI)

    none,

    2013-01-01

    venThis Building America Top Innovations profile describes Building America research showing how automated night ventilation can reduce cooling energy costs up to 40% and peak demand up to 50% in California’s hot-dry central valley climates and can eliminate the need for air conditioning altogether in the coastal marine climate.

  5. An Improved determination of the width of the top quark

    SciTech Connect (OSTI)

    Abazov, Victor Mukhamedovich; /Dubna, JINR; Abbott, Braden Keim; /Oklahoma U.; Acharya, Bannanje Sripath; /Tata Inst.; Adams, Mark Raymond; /Illinois U., Chicago; Adams, Todd; /Florida State U.; Alexeev, Guennadi D.; /Dubna, JINR; Alkhazov, Georgiy D.; /St. Petersburg, INP; Alton, Andrew K.; /Michigan U. /Augustana Coll., Sioux Falls; Alverson, George O.; /Northeastern U.; Aoki, Masato; /Fermilab; Askew, Andrew Warren; /Florida State U. /Stockholm U.

    2012-01-01

    We present an improved determination of the total width of the top quark, {Lambda}{sub t}, using 5.4 fb{sup -1} of integrated luminosity collected by the D0 Collaboration at the Tevatron p{bar p} Collider. The total width {Lambda}{sub t} is extracted from the partial decay width {Lambda}(t {yields} Wb) and the branching fraction {Beta}(t {yields} Wb). {Lambda}(t {yields} Wb) is obtained from the t-channel single top quark production cross section and {Beta}(t {yields} Wb) is measured in t{bar t} events. For a top mass of 172.5 GeV, the resulting width is {Lambda}{sub t} = 2.00{sub -0.43}{sup +0.47} GeV. This translates to a top-quark lifetime of {tau}{sub t} = (3.29{sub -0.63}{sup +0.90}) x 10{sup -25} s. We also extract an improved direct limit on the CKM matrix element 0.81 < |V{sub tb}| {le} 1 at 95% C.L. and a limit of |V{sub tb'}| < 0.59 for a high mass fourth generation bottom quark assuming unitarity of the fourth generation quark mixing matrix.

  6. CDF/ANAL/TOP/PUBLIC/10048 version 1.0

    E-Print Network [OSTI]

    Quigg, Chris

    mechanisms such as Z bosons or Kaluza-Klein gluons. In the standard model, top quarks decay weakly before any are the numbers of opposite and same helicity events [3]. This analysis measures fo by fitting the helicity angle CDF measurement [5] uses kinematic reconstruction in the dilepton sample to find the lepton and b

  7. Semitransparent Organic Photovoltaic Cells with Laminated Top Electrode

    E-Print Network [OSTI]

    Cui, Yi

    efficiencies is the use of multijunction cell archi- tectures where several individual cells with different, or when the energy gaps of the materials are not ideal. In multijunction architectures in which the cellsSemitransparent Organic Photovoltaic Cells with Laminated Top Electrode Jung-Yong Lee, Steve T

  8. TOP DOWN VENTILATION AND COOLING Stephen A. Gage

    E-Print Network [OSTI]

    Linden, Paul F.

    the problems inherent in passively ventilating and cooling low and medium rise urban buildings. We focus are reported which substantiate this concept, and two wind-driven devices which may be used to assist the top.K. The work at Cambridge by Hunt and Linden is part of an ongoing project in which laboratory modeling

  9. Tracking Study for Top-off Safety Validation at SSRL

    SciTech Connect (OSTI)

    Huang, X.; Bauer, J.; Corbett, J.; Dell'Orco, D.; Hettel, B.; Liu, J.; Rabedeau, T.; Safranek, J.; Schmerge, J.; Sebek, J.; Tanabe, J.; Terebilo, A.; Wang, L.; ,

    2011-08-19

    A tracking study was performed at SSRL to identify necessary controls and to prove the safety of top-off operation from radiation hazard under such conditions. The safety rationale, tracking setup and the results are presented. Top-off operational mode has become a trend for existing and planned third-generation storage ring light sources for the many benefits such as increased average brightness, improved thermal stability and elimination of the interruption to user experiments due to traditional injection [1, 2]. Unlike the traditional decay mode injection which happens a few times a day and during which the photon beamline shutters are closed, top-off mode injection requires photon beamline shutters to remain open during injection and occurs much more frequently, from once every 5 seconds to once every 30 minutes. Therefore injection may be transparent to user experiments and the stored current variation can be significantly reduced. For a facility equipped with a full-energy injector, the biggest challenge to the implementation of the top-off mode may be the control of radiation hazard. Studies at ALS and SSRL [2, 3] have shown that a single injected electron pulse that enters the photon beamline and exits the radiation shield wall would cause unacceptable radiation doses on the experimental floor. For the protection of users and experimental equipment, it is hence a prerequisite for top-off operation to establish controls that absolutely prevent such occurrences. Similar to other facilities such as ALS and APS [2, 4], tracking simulations were conducted at SSRL to identify the control measures, define the specifications and prove the radiation safety. However, a different approach toward the proof of safety is taken at SSRL. In this paper we first describe the SSRL accelerator complex with emphasis on the aspects related to top-off in section 2. The general considerations and requirements for top-off are presented in section 3. Section 4 and 5 give a detailed description of the tracking setup and results. Concluding remarks are given in section 6.

  10. Top-flavored dark matter and the forward-backward asymmetry

    E-Print Network [OSTI]

    Abhishek Kumar; Sean Tulin

    2013-03-02

    We propose a simple model where dark matter (DM) carries top flavor and couples to the Standard Model through the top quark within a framework of minimal flavor violation (MFV). Top-flavored DM can explain the anomalous top forward-backward asymmetry observed at the Tevatron, while remaining consistent with other top observables at colliders. By virtue of its large coupling to top, DM acquires a sizable loop coupling to the Z boson, and the relic density is set by annihilation through the Z. We also discuss contraints from current direct detection searches, emphasizing the role of spin-dependent searches to probe this scenario.

  11. Top Spot is an intelligent advertising product that targets your most suitable listings to the right people

    E-Print Network [OSTI]

    Peters, Richard

    Top Spot is an intelligent advertising product that targets your most suitable listings to the right people by suburb and price. Top Spot listings appear at the top of the search results page estate agency both before and after signing up to Top Spot. 72% MORE VIEWS^ Advertising with Top Spot

  12. The Business Case for Fuel Cells 2010: Why Top Companies are...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Business Case for Fuel Cells 2010: Why Top Companies are Purchasing Fuel Cells Today The Business Case for Fuel Cells 2010: Why Top Companies are Purchasing Fuel Cells Today...

  13. The Business Case for Fuel Cells 2010: Why Top Companies are...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0: Why Top Companies are Purchasing Fuel Cells Today The Business Case for Fuel Cells 2010: Why Top Companies are Purchasing Fuel Cells Today This report was developed by Fuel...

  14. Melrose High trio named top team in 20th New Mexico Supercomputing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    top team in Supercomputing Challenge Melrose High trio named top team in 20th New Mexico Supercomputing Challenge Each student receives a check for 1,000. The team also...

  15. Sandia Energy - Optical performance of top-down fabricated InGaN...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    performance of top-down fabricated InGaNGaN nanorod light emitting diode arrays" in Optics Express. This paper details the development of a two-step top-down process for...

  16. Top 5 Reasons to Attend the SunShot Grand Challenge Solar Summit...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Top 5 Reasons to Attend the SunShot Grand Challenge Solar Summit Top 5 Reasons to Attend the SunShot Grand Challenge Solar Summit May 5, 2014 - 12:16pm Addthis

  17. Top 10 Things You Didn't Know about Enhanced Geothermal Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Top 10 Things You Didn't Know about Enhanced Geothermal Systems Top 10 Things You Didn't Know about Enhanced Geothermal Systems April 28, 2015 - 9:40am Addthis Check out the...

  18. Top 10 Things You Didn't Know About Clean Cities | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Top 10 Things You Didn't Know About Clean Cities Top 10 Things You Didn't Know About Clean Cities June 14, 2013 - 5:21pm Addthis Nearly 100 Clean Cities coalitions work to reduce...

  19. Fact #775: April 15, 2013 Top Ten Urban Areas for Fuel Wasted...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5: April 15, 2013 Top Ten Urban Areas for Fuel Wasted due to Traffic Congestion, 2011 Fact 775: April 15, 2013 Top Ten Urban Areas for Fuel Wasted due to Traffic Congestion, 2011...

  20. Top 8 Things You Didn't Know About Thomas Alva Edison | Department...

    Energy Savers [EERE]

    Top 8 Things You Didn't Know About Thomas Alva Edison Top 8 Things You Didn't Know About Thomas Alva Edison November 18, 2013 - 3:00pm Addthis Thomas A. Edison in his "Invention...

  1. Year in Review: Top Five EERE Blog Posts of 2014 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Year in Review: Top Five EERE Blog Posts of 2014 Year in Review: Top Five EERE Blog Posts of 2014 December 30, 2014 - 10:07am Addthis Paul Lester Paul Lester Digital Content...

  2. The Top Ten Things I Learned at the Ambassador Retreat | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Top Ten Things I Learned at the Ambassador Retreat The Top Ten Things I Learned at the Ambassador Retreat September 4, 2014 - 1:36pm Addthis Britt Ide President, Ide Law &...

  3. Top Quark Results Using CMS Data at 7 TeV

    E-Print Network [OSTI]

    Karl M. Ecklund; for the CMS Collaboration

    2011-10-10

    I give an overview of recent results on top quark properties and interactions, obtained using data collected with the CMS experiment during the years 2010--2011 at sqrt(s)= 7 TeV. Measurements are presented for the inclusive top pair production cross section, using the dilepton, lepton plus jets, and hadronic channels. The mass of the top quark is measured using the dilepton and lepton plus jets samples. CMS also measures the cross section for electroweak production of single top quarks and constrains the CKM matrix element V_tb. Top quark results are compared with Standard Model predictions and used to search for possible presence of new physics. In particular, measurements of the top-pair invariant mass distribution are used to search for new particles decaying to top pairs. CMS has also investigated the top-pair charge asymmetry to search for possible new physics contributions.

  4. RG-Improved Predictions for Top-Quark Pair Production at

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    RG-Improved Predictions for Top-Quark Pair Production at Hadron Colliders Matthias Neubert Johannes Threshold resummation for Higgs production Threshold resummation for top-quark pair production Valentin

  5. Top 6 Things You Didn't Know About Nuclear Power | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Top 6 Things You Didn't Know About Nuclear Power Top 6 Things You Didn't Know About Nuclear Power December 12, 2014 - 10:39am Addthis These are the first lightbulbs lit by nuclear...

  6. Energy Efficiency Can Be at the Top of Your Shopping List | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Efficiency Can Be at the Top of Your Shopping List Energy Efficiency Can Be at the Top of Your Shopping List November 30, 2009 - 3:30pm Addthis Eric Barendsen Energy...

  7. Wave Energy Prize Narrowed from 92 Teams to Top 20 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Wave Energy Prize Narrowed from 92 Teams to Top 20 Wave Energy Prize Narrowed from 92 Teams to Top 20 August 14, 2015 - 2:16pm Addthis Wave Energy Prize Narrowed from 92 Teams to...

  8. Direct Measurement of the Total Decay Width of the Top Quark

    E-Print Network [OSTI]

    Gomez-Ceballos, Guillelmo

    We present a measurement of the total decay width of the top quark using events with top-antitop quark pair candidates reconstructed in the final state with one charged lepton and four or more hadronic jets. We use the ...

  9. Fact #641: September 20, 2010 Top States for the Production of Cars and Trucks

    Broader source: Energy.gov [DOE]

    For the 2009 calendar year, Michigan retained its lead position as the top producing state for both cars and trucks. Ohio and Kentucky were the only other states to place in the top 5 for both cars...

  10. Forward-backward asymmetry in top quark-antiquark production

    SciTech Connect (OSTI)

    Abazov, Victor Mukhamedovich [Dubna, JINR; Abbott, Braden Keim [Oklahoma U.; Acharya, Bannanje Sripath [Tata Inst.; Adams, Mark Raymond [Illinois U., Chicago; Adams, Todd [Florida State U.; Alexeev, Guennadi D [Dubna, JINR; Alkhazov, Georgiy D [St. Petersburg, INP; Alton, Andrew K [Michigan U.; Augustana Coll., Sioux Falls; Alverson, George O [Northeastern U.; Alves, Gilvan Augusto [Rio de Janeiro, CBPF; Aoki, Masato [Fermilab; Louisiana Tech. U.

    2011-12-12

    We present a measurement of forward-backward asymmetry in top quark-antiquark production in proton-antiproton collisions in the final state containing a lepton and at least four jets. Using a dataset corresponding to an integrated luminosity of 5.4 fb-1, collected by the D0 experiment at the Fermilab Tevatron Collider, we measure the t{bar t} forward-backward asymmetry to be (9.2 ± 3.7)% at the reconstruction level. When corrected for detector acceptance and resolution, the asymmetry is found to be (19.6 ± 6.5)%. We also measure a corrected asymmetry based on the lepton from a top quark decay, found to be (15.2 ± 4.0)%. The results are compared to predictions based on the next-to-leading-order QCD generator mc@nlo. The sensitivity of the measured and predicted asymmetries to the modeling of gluon radiation is discussed.

  11. Why should we care about the top quark Yukawa coupling?

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Shapshnikov, Mikhail; Bezrukov, Fedor

    2015-04-15

    In the cosmological context, for the Standard Model to be valid up to the scale of inflation, the top quark Yukawa coupling yt should not exceed the critical value ytcrit , coinciding with good precision (about 0.2‰) with the requirement of the stability of the electroweak vacuum. So, the exact measurements of yt may give an insight on the possible existence and the energy scale of new physics above 100 GeV, which is extremely sensitive to yt. In this study, we overview the most recent theoretical computations of and the experimental measurements of ytcrit and the experimental measurements ofmore »yt. Within the theoretical and experimental uncertainties in yt, the required scale of new physics varies from 10? GeV to the Planck scale, urging for precise determination of the top quark Yukawa coupling.« less

  12. Search for Single Top Quark Production at LEP2

    E-Print Network [OSTI]

    The OPAL collaboration; G. Abbiendi

    2001-10-04

    A search for single top quark production via flavour changing neutral currents (FCNC) was performed with data collected by the OPAL detector at the e+e- collider LEP. Approximately 600 pb-1 of data collected at sqrt(s) = 189 - 209 GeV were used to search for the FCNC process e+ e- -> tc(u) -> bWc(u). This analysis is sensitive to the leptonic and the hadronic decay modes of the W boson. No evidence for a FCNC process is observed. Upper limits at the 95% confidence level on the single top production cross-section as a function of the centre-of-mass energy are derived. Limits on the anomalous coupling parameters kappa_gamma and kappa_Z are determined from these results.

  13. Forward-backward asymmetry in top quark-antiquark production

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Abazov, Victor Mukhamedovich [Dubna, JINR; Abbott, Braden Keim [Oklahoma U.; Acharya, Bannanje Sripath [Tata Inst.; Adams, Mark Raymond [Illinois U., Chicago; Adams, Todd [Florida State U.; Alexeev, Guennadi D [Dubna, JINR; Alkhazov, Georgiy D [St. Petersburg, INP; Alton, Andrew K [Michigan U.; Augustana Coll., Sioux Falls; Alverson, George O [Northeastern U.; Alves, Gilvan Augusto [Rio de Janeiro, CBPF; Aoki, Masato [Fermilab; Louisiana Tech. U.

    2011-12-12

    We present a measurement of forward-backward asymmetry in top quark-antiquark production in proton-antiproton collisions in the final state containing a lepton and at least four jets. Using a dataset corresponding to an integrated luminosity of 5.4 fb-1, collected by the D0 experiment at the Fermilab Tevatron Collider, we measure the t{bar t} forward-backward asymmetry to be (9.2 ± 3.7)% at the reconstruction level. When corrected for detector acceptance and resolution, the asymmetry is found to be (19.6 ± 6.5)%. We also measure a corrected asymmetry based on the lepton from a top quark decay, found to be (15.2 ± 4.0)%. The results are compared to predictions based on the next-to-leading-order QCD generator mc@nlo. The sensitivity of the measured and predicted asymmetries to the modeling of gluon radiation is discussed.

  14. The role of top in heavy flavor physics

    SciTech Connect (OSTI)

    Hewett, J.L. [Stanford Linear Accelerator Center, Stanford, CA (United States)

    1997-01-01

    The implications of the massive top quark on heavy flavor transitions are explored. We review the generation of quark masses and mixings and the determination techniques, and present the status of the elements of the weak mixing matrix. Purely leptonic decays of heavy mesons are briefly summarized. We present a general introduction to flavor changing neutral currents and an extensive summary of radiative and other rare decay modes. The physics of neutral meson mixing is reviewed and applied to each meson system. We describe the phenomenology of CP violation and how it may be measured in meson decays. Standard Model predictions are given in each case and the effects of physics beyond the Standard Model are also discussed. Throughout, we contrast these transitions in the K and B meson systems to those in the D meson and top-quark sectors.

  15. Forward-backward asymmetry in top quark-antiquark production

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Abazov, Victor Mukhamedovich

    2011-12-12

    We present a measurement of forward-backward asymmetry in top quark-antiquark production in proton-antiproton collisions in the final state containing a lepton and at least four jets. Using a dataset corresponding to an integrated luminosity of 5.4 fb-1, collected by the D0 experiment at the Fermilab Tevatron Collider, we measure the t{bar t} forward-backward asymmetry to be (9.2 ± 3.7)% at the reconstruction level. When corrected for detector acceptance and resolution, the asymmetry is found to be (19.6 ± 6.5)%. We also measure a corrected asymmetry based on the lepton from a top quark decay, found to be (15.2 ± 4.0)%.more »The results are compared to predictions based on the next-to-leading-order QCD generator mc@nlo. The sensitivity of the measured and predicted asymmetries to the modeling of gluon radiation is discussed.« less

  16. Single-top production in MC@NLO

    E-Print Network [OSTI]

    S. Frixione; E. Laenen; P. Motylinski; B. R. Webber

    2006-03-31

    We match next-to-leading order QCD results for single-top hadroproduction with parton shower Monte Carlo simulations, according to the prescription of the MC@NLO formalism. In this way, we achieve the first practical implementation in MC@NLO of a process that has both initial- and final-state collinear singularities. We show that no difficulties of principle arise from this complication, and present selected results relevant to the Tevatron.

  17. Reconstructing top quark-antiquark events with one lost jet

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Demina, Regina [Univ. of Rochester, Rochester, NY (United States); Harel, Amnon [Univ. of Rochester, Rochester, NY (United States); Orbaker, Douglas [Univ. of Rochester, Rochester, NY (United States)

    2015-07-01

    We present a technique for reconstructing the kinematics of pair-produced top quarks that decay to a charged lepton, a neutrino and four final state quarks in the subset of events where only three jets are reconstructed. We present a figure of merit that allows for a fair comparison of reconstruction algorithms without requiring their calibration. The new reconstruction of events with only three jets is fully competitive with the full reconstruction typically used for four-jet events.

  18. Effective four-fermion operators in top physics: a roadmap

    E-Print Network [OSTI]

    J. A. Aguilar-Saavedra

    2011-06-06

    We write down a minimal basis for dimension-six gauge-invariant four-fermion operators, with some operator replacements with respect to previous ones which make it simpler for calculations. Using this basis we classify all four-fermion operator contributions involving one or two top quarks. Taking into account the different fermion chiralities, possible colour contractions and independent flavour combinations, a total number of 572 gauge-invariant operators are involved. We apply this to calculate all three-body top decay widths t -> d_k u_i dbar_j, t -> d_k e_i+ nu_j, t -> u_k u_i ubar_j, t -> u_k e_j+ e_i-, t -> u_k nu_j nu_i (with i,j,k generation indices) mediated by dimension-six four-fermion operators, including the interference with the Standard Model amplitudes when present. All single top production cross sections in pp, p pbar and e+ e- collisions are calculated as well, namely u_i d_k -> d_j t, dbar_j d_k -> ubar_i t, u_i dbar_j -> dbar_k t, u_i u_k -> u_j t, u_i ubar_j -> ubar_k t, e+ e- -> ubar_k t and the charge conjugate processes. We also compute all top pair production cross sections, ubar_i u_j -> t tbar, dbar_i d_j -> t tbar, u_i u_j -> t t and e+ e- -> t tbar. Our results are completely general, without assuming any particular relation among effective operator coefficients.

  19. Reconstructing top quark-antiquark events with one lost jet

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Demina, Regina; Harel, Amnon; Orbaker, Douglas

    2015-04-02

    We present a technique for reconstructing the kinematics of pair-produced top quarks that decay to a charged lepton, a neutrino and four final state quarks in the subset of events where only three jets are reconstructed. We present a figure of merit that allows for a fair comparison of reconstruction algorithms without requiring their calibration. The new reconstruction of events with only three jets is fully competitive with the full reconstruction typically used for four-jet events.

  20. Top quark physics and QCD: Progress since the TESLA TDR

    E-Print Network [OSTI]

    A. Brandenburg

    2003-09-08

    I review progress on investigations concerning top quark physics and QCD at a future linear e+e- collider that has been achieved since the presentation of the TESLA technical design report in spring 2001. I concentrate on studies that have been presented during the workshop series of the Extended Joint ECFA/DESY Study on Physics and Detectors for a Linear Electron-Positron Collider.

  1. DOE's Top Environmental Cleanup Official Visits Paducah Site | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based| Department8, 2015 GATEWAY Takesto ResumeServicesof Energy DOE's Top

  2. EM Recovery Act Top Line Messages | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based|DepartmentStatementof EnergyQuality AssuranceTop Line Messages EM

  3. WIPP Receives Top Safety Award | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematics And Statistics » USAJobs SearchAMERICA'S FUTURE. regulators consumerWIND ENERGYMonitoringTop

  4. U.S. Department of Energy Wind and Hydropower Technologies: Top 10 Program Accomplishments

    SciTech Connect (OSTI)

    Not Available

    2008-05-01

    This brochure describes the top ten accompishments of the DOE Wind Energy Program during the past 30 years.

  5. Advanced Combustion Engine R&D: Goals, Strategies, and Top Accomplishments (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-03-01

    Fact sheet describes the top accomplishments, goals and strategies of DOEs Advanced Combustion Engine Research and Development sub program.

  6. Single Top and Higgs Production in $e^- p$ collisions

    E-Print Network [OSTI]

    Mukesh Kumar

    2015-06-12

    In this proceedings some studies on the prospects of single top production at the Large Hadron Electron Collider (LHeC) and double Higgs production at the Future Circular Hadron Electron Collider (FCC-he) shall be presented. In particular, we investigated the $tbW$ couplings via single top quark production with the introduction of possible anomalous Lorentz structures, and measured the sensitivity of the Higgs self coupling ($\\lambda$) through double Higgs production. The studies are performed with 60 GeV electrons colliding with 7 (50) TeV protons for the LHeC (FCC-he). For the single top studies a parton level study has been performed, and we find the sensitivity of the anomalous coupling at a 95\\% C.L, considering 10-1\\% systematic errors. The double Higgs production has been studied with speculated detector parameters and the sensitivity of $\\lambda$ estimated via the cross section study around the Standard Model Higgs self coupling strength ($\\lambda_{SM}$) considering 5\\% systematic error in signal and backgrounds. Effects of non-standard CP-even and CP-odd couplings for $hhh$, $hWW$ and $hhWW$ vertices have been studied and constrained at 95\\% C.L.

  7. Evidence for single top quark production using Bayesian neural networks

    SciTech Connect (OSTI)

    Kau, Daekwang; /Florida State U.

    2007-08-01

    We present results of a search for single top quark production in p{bar p} collisions using a dataset of approximately 1 fb{sup -1} collected with the D0 detector. This analysis considers the muon+jets and electron+jets final states and makes use of Bayesian neural networks to separate the expected signals from backgrounds. The observed excess is associated with a p-value of 0.081%, assuming the background-only hypothesis, which corresponds to an excess over background of 3.2 standard deviations for a Gaussian density. The p-value computed using the SM signal cross section of 2.9 pb is 1.6%, corresponding to an expected significance of 2.2 standard deviations. Assuming the observed excess is due to single top production, we measure a single top quark production cross section of {sigma}(p{bar p} {yields} tb + X, tqb + X) = 4.4 {+-} 1.5 pb.

  8. Ultra High Energy Neutrino Signature in Top-Down Scenario

    E-Print Network [OSTI]

    Roberto Aloisio

    2006-12-22

    Neutrinos are the best candidates to test the extreme Universe and ideas beyond the Standard Model of particle Physics. Once produced, neutrinos do not suffer any kind of attenuation by intervening radiation fields like the Cosmic Microwave Background and are not affected by magnetic fields. In this sense neutrinos are useful messengers from the far and young Universe. In the present paper we will discuss a particular class of sources of Ultra High Energy Cosmic Rays introduced to explain the possible excess of events with energy larger than the Graisen-Zatsepin-Kuzmin cut-off. These sources, collectively called top-down, share a common feature: UHE particles are produced in the decay or annihilation of superheavy, exotic, particles. As we will review in the present paper, the largest fraction of Ultra High Energy particles produced in the top-down scenario are neutrinos. The study of these radiation offers us a unique opportunity to test the exotic mechanisms of the top-down scenario.

  9. Top quark mass measurement from dilepton events at CDF II

    SciTech Connect (OSTI)

    Abulencia, A.; Acosta, D.; Adelman, Jahred A.; Affolder, Anthony A.; Akimoto, T.; Albrow, M.G.; Ambrose, D.; Amerio, S.; Amidei, D.; Anastassov, A.; Anikeev, K.; /Taiwan, Inst. Phys. /Argonne /Barcelona, IFAE /Baylor U. /INFN, Bologna /Brandeis U. /UC, Davis /UCLA /UC, San Diego /UC, Santa Barbara /Cantabria Inst. of Phys.

    2005-12-01

    We report a measurement of the top quark mass using events collected by the CDF II Detector from p{bar p} collisions at {radical}s = 1.96 TeV at the Fermilab Tevatron. We calculate a likelihood function for the top mass in events that are consistent with t{bar t} {yields} {bar b}{ell}{sup -}{bar {nu}}{sub {ell}}b{ell}{prime}{sup +}{nu}{sub {ell}}{prime} decays. The likelihood is formed as the convolution of the leading-order matrix element and detector resolution functions. The joint likelihood is the product of likelihoods for each of 33 events collected in 340 pb{sup -1} of integrated luminosity, yielding a top quark mass M{sub t} = 165.2 {+-} 6.1(stat.) {+-} 3.4(syst.) GeV/c{sup 2}. This first application of a matrix-element technique to t{bar t} {yields} b{ell}{sup +}{nu}{sub {ell}}{bar b}{ell}{prime}{sup -}{bar {nu}}{sub {ell}}, decays gives the most precise single measurement of M{sub t} in dilepton events. Combined with other CDF Run II measurements using dilepton events, we measure M{sub t} = 167.9 {+-} 5.2(stat.) {+-} 3.7(syst.) GeV/c{sup 2}.

  10. Experience With Top Gun Wingman: A ProxyBased Graphical Web

    E-Print Network [OSTI]

    California at Berkeley, University of

    Experience With Top Gun Wingman: A Proxy­Based Graphical Web Browser for the 3Com PalmPilot Armando describe one such application, Top Gun Wingman, a graphical, split Web browser for the Palm Pilot PDA in the context of Top Gun Wingman, the world's first graphical Web browser for the 3Com PalmPilot. Existing

  11. Top-Down Influence in Young Children's Linguistic Ambiguity Resolution Hugh Rabagliati

    E-Print Network [OSTI]

    Pylkkänen, Liina

    Top-Down Influence in Young Children's Linguistic Ambiguity Resolution Hugh Rabagliati New York adults resolve syntactic ambiguities by integrating a variety of cues, children are less sensitive to top-down evidence. We test whether this top-down insensitivity is specific to syntax or a general feature

  12. TOP-C: Task-Oriented Parallel C for Distributed and Shared Memory

    E-Print Network [OSTI]

    Cooperman, Gene

    TOP-C: Task-Oriented Parallel C for Distributed and Shared Memory Gene Cooperman parallel hardware. TOP-C (Task-Orien* *ted Parallel C) attempts such a model by presenting a task the TOP-C model and then presents ongoing research on combining the advantages of both models in a single

  13. THE TOP QUARK Updated December 2011 by T.M. Liss (Univ. Illinois) and A.

    E-Print Network [OSTI]

    ­ 1­ THE TOP QUARK Updated December 2011 by T.M. Liss (Univ. Illinois) and A. Quadt (Univ. G¨ottingen). A. Introduction: The top quark is the Q = 2/3, T3 = +1/2 member of the weak-isospin doublet" for more information). This note summarizes the properties of the top quark (mass, production cross section

  14. Top eigenvalue of a random matrix: A tale of Satya N. Majumdar

    E-Print Network [OSTI]

    Udgaonkar, Jayant B.

    Top eigenvalue of a random matrix: A tale of tails Satya N. Majumdar Laboratoire de Physique Th, 2012 S.N. Majumdar Top eigenvalue of a random matrix: A tale of tails #12;First Appearence of Random Matrices S.N. Majumdar Top eigenvalue of a random matrix: A tale of tails #12;First Appearence of Random

  15. I. Top 20 TA Traps 83 II. Team Meeting Guidelines 85

    E-Print Network [OSTI]

    Minnesota, University of

    Other Teaching Resources Page I. Top 20 TA Traps 83 II. Team Meeting Guidelines 85 III. TA Office I. Top 20 TA Traps This list has been compiled by mentor TAs to help you avoid some common pitfalls of being a TA. These are the top twenty things TAs do that interfere with the work of teaching. General

  16. Microsoft PowerPoint - 5.3 Item 01 Top Kill Operation Status...

    Energy Savers [EERE]

    5.3 Item 01 Top Kill Operation Status 09 June 1400.pptx Microsoft PowerPoint - 5.3 Item 01 Top Kill Operation Status 09 June 1400.pptx Microsoft PowerPoint - 5.3 Item 01 Top Kill...

  17. Top Wealth Shares in the United States, 19162000 National Tax Journal

    E-Print Network [OSTI]

    Sadoulet, Elisabeth

    Top Wealth Shares in the United States, 1916­2000 445 National Tax Journal Vol. LVII, No. 2, Part 2 June 2004 Abstract - This paper presents new homogeneous series on top wealth shares from 1916 to 2000 in the United States using estate tax return data. Top wealth shares were very high at the beginning

  18. I. Top 20 TA Traps 129 II. Team Meeting Guidelines 131

    E-Print Network [OSTI]

    Minnesota, University of

    Chapter 5 Other Teaching Resources Page I. Top 20 TA Traps 129 II. Team Meeting Guidelines 131 III for TAs 152 #12;#12;I. Top 20 TA Traps This list has been compiled by mentor TAs to help you avoid some common pitfalls of being a TA. These are the top twenty things TAs do that interfere with the work

  19. Top-N Query: Query Language, Distance Function and Processing Strategies

    E-Print Network [OSTI]

    Meng, Weiyi

    Top-N Query: Query Language, Distance Function and Processing Strategies Yuxi Chen, Weiyi Meng@cs.binghamton.edu Abstract. The top-N query problem is to find the N results that satisfy the query condition the best and products are sold on the Internet. This paper addresses three important issues related to the top-N query

  20. TOP INCOMES IN THE UNITED STATES AND CANADA OVER THE TWENTIETH CENTURY

    E-Print Network [OSTI]

    Sadoulet, Elisabeth

    TOP INCOMES IN THE UNITED STATES AND CANADA OVER THE TWENTIETH CENTURY Emmanuel Saez University of California, Berkeley Abstract This paper presents top income shares series for the United States and Canada over the 20th century. In both countries, top income shares display a U-shaped pattern over the century

  1. Top-down versus bottom-up learning in cognitive skill acquisition

    E-Print Network [OSTI]

    Varela, Carlos

    Top-down versus bottom-up learning in cognitive skill acquisition Action editor: Vasant Honavar Ron between implicit and explicit processes during skill learning, in terms of top-down learning (that is learning that takes into account both implicit and explicit processes and both top-down and bottom

  2. Top-down and bottom-up diversity cascades in detrital vs. living food webs

    E-Print Network [OSTI]

    Dyer, Lee

    REPORT Top-down and bottom-up diversity cascades in detrital vs. living food webs Lee A. Dyer1 for maintaining diversity in biotic communities, but the indirect (ÔcascadingÕ) effects of top-down and bottom in decomposer food webs. We measured effects of top predators and plant resources on the diversity of endophytic

  3. I. Top 20 TA Traps 129 II. Team Meeting Guidelines 131

    E-Print Network [OSTI]

    Minnesota, University of

    Chapter 5 Other Teaching Resources Page I. Top 20 TA Traps 129 II. Team Meeting Guidelines 131 III for TAs 152 #12;#12;Page 129 I. Top 20 TA Traps This list has been compiled by mentor TAs to help you avoid some common pitfalls of being a TA. These are the top twenty things TAs do that interfere

  4. TOP-C: Task-Oriented Parallel C for Distributed and Shared Memory

    E-Print Network [OSTI]

    Cooperman, Gene

    TOP-C: Task-Oriented Parallel C for Distributed and Shared Memory Gene Cooperman College one, while maintaining most of the potential efficiency of the underlying parallel hardware. TOP-passing required by the underlying hardware. This article reviews the TOP-C model and then presents ongoing

  5. Top-k Set Similarity Joins Chuan Xiao Wei Wang Xuemin Lin Haichuan Shang

    E-Print Network [OSTI]

    Lin, Xuemin

    Top-k Set Similarity Joins Chuan Xiao Wei Wang Xuemin Lin Haichuan Shang The University of New threshold. In this paper, we study a variant of the similarity join, termed top-k set similarity join. It returns the top-k pairs of records ranked by their similarities, thus eliminating the guess work users

  6. Experience With Top Gun Wingman: A Proxy-Based Graphical Web

    E-Print Network [OSTI]

    Goldberg, Ian

    Experience With Top Gun Wingman: A Proxy-Based Graphical Web Browser for the 3Com PalmPilot Armando describe one such application, Top Gun Wingman, a graphical, split Web browser for the Palm Pilot PDA in the context of Top Gun Wingman, the world's first graphical Web browser for the 3Com PalmPilot. Existing

  7. Experience With Top Gun Wingman: A Proxy-Based Graphical Web

    E-Print Network [OSTI]

    Gribble, Steve

    Experience With Top Gun Wingman: A Proxy-Based Graphical Web Browser for the 3Com PalmPilot Armando and diverse applications. We describe one such application, Top Gun Wingman, a graphical, split Web browser) approach in the context of Top Gun Wingman, the world's first graphical Web browser for the 3Com Palm

  8. Evoluo da Computao de Alto Desempenho sob a tica da Lista TOP500

    E-Print Network [OSTI]

    Song, Siang Wun

    Evolução da Computação de Alto Desempenho sob a Ótica da Lista TOP500 ou (Se um processador já é evolução na ótica da lista TOP500. Siang Wun Song Evolução da Computação de Alto a Ótica da Lis #12;Lista TOP500 Lista dos 500 computadores mais poderosos do mundo Divulgada duas vezes

  9. Acceptability of Four Transformer Top-Oil Thermal Models: Pt. 2: Comparing Metrics

    E-Print Network [OSTI]

    1 Acceptability of Four Transformer Top-Oil Thermal Models: Pt. 2: Comparing Metrics Lida Jauregui transformer top-oil thermal models are examined vis-à-vis training with measured data. Acceptability is unacceptable for model identification purposes. The linear top-oil model is acceptable for FOFA transformers

  10. Theoretical results for electroweak-boson and single-top production

    E-Print Network [OSTI]

    Nikolaos Kidonakis

    2015-06-12

    I present results from recent high-order calculations for the production of electroweak bosons and top quarks. In particular, I discuss $W$ and $Z$ boson production at large transverse momentum, single-top production, and FCNC top production. Theoretical predictions which include higher-order soft-gluon corrections are presented for total cross sections and differential distributions at the LHC.

  11. RankSQL: Query Algebra and Optimization for Relational Top-k Queries

    E-Print Network [OSTI]

    Ilyas, Ihab Francis

    RankSQL: Query Algebra and Optimization for Relational Top-k Queries Chengkai Li1 Kevin Chen systems (RDBMS), by extending relational algebra and query optimization. Previously, top-k query and principled framework to support efficient evaluations of ranking (top-k) queries in relational database

  12. Large-Eddy Simulation of Evaporatively Driven Entrainment in Cloud-Topped Mixed Layers

    E-Print Network [OSTI]

    Collett Jr., Jeffrey L.

    Large-Eddy Simulation of Evaporatively Driven Entrainment in Cloud-Topped Mixed Layers TAKANOBU, Colorado (Manuscript received 1 March 2007, in final form 19 July 2007) ABSTRACT Cloud-top entrainment instability (CTEI) is a hypothesized positive feedback between cloud-top entrain- ment and enhanced turbulence

  13. Comparison of MISR and MODIS cloud-top heights in the presence of cloud overlap

    E-Print Network [OSTI]

    Baum, Bryan A.

    Comparison of MISR and MODIS cloud-top heights in the presence of cloud overlap C.M. Naud a, , B July 2006; accepted 3 September 2006 Abstract Coincident MISR and MODIS cloud-top heights retrieved March 2000 and October 2003. The difference between MODIS and MISR cloud-top heights is assessed

  14. The No-Boundary Probability for the Universe starting at the top of the hill

    E-Print Network [OSTI]

    Tim Clunan

    2007-04-16

    We use the Hartle-Hawking No-Boundary Proposal to make a comparison between the probabilities of the universe starting near, and at, the top of a hill in the effective potential. In the context of top-down cosmology, our calculation finds that the universe doesn't start at the top.

  15. Highly efficient inverted top emitting organic light emitting diodes using a transparent top electrode with color stability on viewing angle

    SciTech Connect (OSTI)

    Kim, Jung-Bum; Lee, Jeong-Hwan; Moon, Chang-Ki; Kim, Jang-Joo, E-mail: jjkim@snu.ac.kr [Department of Materials Science and Engineering, Seoul National University, Seoul 151-742 (Korea, Republic of)

    2014-02-17

    We report a highly efficient phosphorescent green inverted top emitting organic light emitting diode with excellent color stability by using the 1,4,5,8,9,11-hexaazatriphenylene-hexacarbonitrile/indium zinc oxide top electrode and bis(2-phenylpyridine)iridium(III) acetylacetonate as the emitter in an exciplex forming co-host system. The device shows a high external quantum efficiency of 23.4% at 1000?cd/m{sup 2} corresponding to a current efficiency of 110?cd/A, low efficiency roll-off with 21% at 10?000?cd/m{sup 2} and low turn on voltage of 2.4?V. Especially, the device showed very small color change with the variation of ?x?=?0.02, ?y?=?0.02 in the CIE 1931 coordinates as the viewing angle changes from 0° to 60°. The performance of the device is superior to that of the metal/metal cavity structured device.

  16. Rare Decay of the Top t->c l lbar and Single Top Production at International Linear Collider

    E-Print Network [OSTI]

    Mariana Frank; Ismail Turan

    2006-10-17

    We perform a complete and detailed analysis of the flavor changing neutral current rare top quark decays t-> cl+l- and t->c nu_i bar nu_i at one-loop level in the Standard Model, Two Higgs Doublet Models (I and II) and in MSSM. The branching ratios are very small in all models, O(10^-14), except for the case of the unconstrained MSSM, where they can reach O(10^-6) for e+e- and nu_i bar nu_i, and O(10^-5) for tau+ tau-. This branching ratio is comparable to the ones for t-> c V, cH. We also study the production rates of single top and the forward-backward asymmetry in e+e- -> t cbar and comment on the observability of such a signal at the International Linear Collider.

  17. Reconstructing singly produced top partners in decays to $\\mathbf{Wb}$

    E-Print Network [OSTI]

    Nicolas Gutierrez Ortiz; James Ferrando; Deepak Kar; Michael Spannowsky

    2014-10-09

    Fermionic top partners are a feature of many models of physics beyond the Standard Model. We propose a search strategy for single production of top partners focussing specifically on the dominant decay to $Wb$. The enormous background can be reduced by requiring a forward jet and exploiting jet substructure to suppress top-pair production. This simple strategy is shown to produce a sensitive search for single top-partner production, in the context of composite Higgs models, that has competitive mass reach with existing experimental searches for top-partner-pair production at the 8TeV LHC.

  18. Top pair production at a future $e^+e^-$ machine in a composite Higgs scenario

    E-Print Network [OSTI]

    Daniele Barducci; Stefania De Curtis; Stefano Moretti; Giovanni Marco Pruna

    2015-04-21

    The top quark plays a central role in many New Physics scenarios and in understanding the details of Electro-Weak Symmetry Breaking. In the short- and mid-term future, top-quark studies will mainly be driven by the experiments at the Large Hadron Collider. Exploration of top quarks will, however, be an integral part of particle physics studies at any future facility and an $e^+ e^-$ collider will have a very comprehensive top-quark physics program. We discuss the possibilities of testing NP in the top-quark sector within a composite Higgs scenario through deviations from the Standard Model in top pair production for different Centre-of-Mass energy options of a future $e^+e^-$ machine. In particular, we focus on precision studies of the top-quark sector at a CM energy ranging from 370 GeV up to 3 TeV.

  19. Top pair production at a future $e^+e^-$ machine in a composite Higgs scenario

    E-Print Network [OSTI]

    Daniele Barducci; Stefania De Curtis; Stefano Moretti; Giovanni Marco Pruna

    2015-09-06

    The top quark plays a central role in many New Physics scenarios and in understanding the details of Electro-Weak Symmetry Breaking. In the short- and mid-term future, top-quark studies will mainly be driven by the experiments at the Large Hadron Collider. Exploration of top quarks will, however, be an integral part of particle physics studies at any future facility and an $e^+ e^-$ collider will have a very comprehensive top-quark physics program. We discuss the possibilities of testing NP in the top-quark sector within a composite Higgs scenario through deviations from the Standard Model in top pair production for different Centre-of-Mass energy options of a future $e^+e^-$ machine. In particular, we focus on precision studies of the top-quark sector at a CM energy ranging from 370 GeV up to 3 TeV.

  20. Top Quark Pair Production Measurements Using the ATLAS Detector at the LHC

    E-Print Network [OSTI]

    Bertsche, Carolyn; The ATLAS collaboration

    2015-01-01

    Measurements of the inclusive top quark pair production cross sections in proton­proton collisions with the ATLAS detector at the Large Hadron Collider are presented. The most precise result requires opposite sign electrons and muons and uses the full data­set at a centre­of­mass energy of 7 and 8 TeV. In addition, differential measurements of the top transverse momentum and kinematic properties of the top­anti­top pair are discussed. These measurements, including results using boosted tops, probe our understanding of top pair production in the TeV regime. The results, unfolded to particle and parton level, are compared to recent Monte Carlo generators implementing LO and NLO matrix elements matched with parton showers and NLO QCD calculations. In addition, measurements of the production of top quark pairs in association with gauge bosons or jets are presented.

  1. Lorentz and CPT Violation in Top-Quark Production and Decay

    E-Print Network [OSTI]

    Berger, Micheal S; Liu, Zhi

    2015-01-01

    The prospects are explored for testing Lorentz and CPT symmetry in the top-quark sector. We present the relevant Lagrange density, discuss physical observables, and describe the signals to be sought in experiments. For top-antitop pair production via quark or gluon fusion with subsequent semileptonic or hadronic decays, we obtain the matrix element in the presence of Lorentz violation using the narrow-width approximation. The issue of testing CPT symmetry in the top-quark sector is also addressed. We demonstrate that single-top production and decay is well suited to a search for CPT violation, and we present the matrix elements for single-top production in each of the four tree-level channels. Our results are applicable to searches for Lorentz violation and studies of CPT symmetry in collider experiments, including notably high-statistics top-antitop and single-top production at the Large Hadron Collider.

  2. Unified spin gauge model and the top quark mass

    SciTech Connect (OSTI)

    Chisholm, J.S.R.; Farwell, R.S.

    1995-10-01

    Spin gauge models use a real Clifford algebraic structure R{sub p,q} associated with a real manifold of dimension p + q to describe the fundamental interactions of elementary particles. This review provides a comparison between those models and the standard model, indicating their similarities and differences. By contrast with the standard model, the spin gauge model based on R{sub 3,8} generates intermediate boson mass terms without the need to use the Higgs-Kibble mechanism and produces a precise prediction for the mass of the top quark. The potential of this model to account for exactly three families of fermions is considered.

  3. Preparing the BESSY APPLE Undulators for Top-Up Operation

    SciTech Connect (OSTI)

    Bahrdt, J.; Frentrup, W.; Gaupp, A.; Scheer, M.

    2007-01-19

    BESSY plans to go to topping up operation in the near future. A high injection efficiency is essential to avoid particle losses inside the undulator magnets and to ensure a low radiation background in the beamlines. Dynamic and static multipoles of the insertion devices have to be minimized to accomplish this requirement. APPLE II devices show strong dynamic multipoles in the elliptical and vertical polarization mode. Measurements before and after shimming of these multipoles are presented. The static multipoles of the BESSY UE56-2 which are due to systematic block inhomgeneities have successfully been shimmed recovering the full dynamic aperture.

  4. Top quark pair production cross section at LHC in ATLAS

    E-Print Network [OSTI]

    John David Morris

    2014-10-24

    Measurements of the top quark production cross section in proton-proton collisions with the ATLAS detector at the Large Hadron Collider are presented. The measurements require no, one or two electrons or muons in the final state (single lepton, dilepton, hadronic channel). In addition, the decay modes with tau leptons are tested (channels with tau leptons). The main focus is on measurements of differential spectra of $t\\bar{t}$ final states, in particular, measurements that are able to constrain the modelling of additional parton radiation like the jet multiplicity distribution.

  5. Spectral probabilities of top-down tandem mass spectra

    SciTech Connect (OSTI)

    Liu, Xiaowen; Segar, Matthew W.; Li, Shuai Cheng; Kim, Sangtae

    2014-01-24

    In mass spectrometry (MS)-based proteomics, accurate estimation of statistical signicance of peptide and protein identications is desired for determining whether they are actually correct. Probabilistic models, such as the generating function method, have been successfully applied to compute statistical signicance of peptide-spectrum matches (PSMs) in bottom-up MS, but it is limited to PSMs of short peptides without post-translational modications (PTMs). Recently, top-down MS has be- come available in many laboratories, which often identies intact proteins with PTMs. In this paper, we propose an extended generating function (EGF) method for accurately computing statistical signicance of protein- spectrum matches (PrSMs) with PTMs.

  6. High Energy Absorption Top Nozzle For A Nuclaer Fuel Assembly

    DOE Patents [OSTI]

    Sparrow, James A. (Irmo, SC); Aleshin, Yuriy (Columbia, SC); Slyeptsov, Aleksey (Columbia, SC)

    2004-05-18

    A high energy absorption top nozzle for a nuclear fuel assembly that employs an elongated upper tubular housing and an elongated lower tubular housing slidable within the upper tubular housing. The upper and lower housings are biased away from each other by a plurality of longitudinally extending springs that are restrained by a longitudinally moveable piston whose upward travel is limited within the upper housing. The energy imparted to the nozzle by a control rod scram is mostly absorbed by the springs and the hydraulic affect of the piston within the nozzle.

  7. Dissipation-induced heteroclinic orbits in tippe tops.

    SciTech Connect (OSTI)

    Marsden, Jerrold E. (Caltech, Pasadena, CA); Bou-Rabee, Nawaf M. (Caltech, Pasadena, CA); Romero, Louis Anthony

    2008-02-01

    This paper demonstrates that the conditions for the existence of a dissipation-induced heteroclinic orbit between the inverted and noninverted states of a tippe top are determined by a complex version of the equations for a simple harmonic oscillator: the modified Maxwell-Bloch equations. A standard linear analysis reveals that the modified Maxwell-Bloch equations describe the spectral instability of the noninverted state and Lyapunov stability of the inverted state. Standard nonlinear analysis based on the energy momentum method gives necessary and sufficient conditions for the existence of a dissipation-induced connecting orbit between these relative equilibria.

  8. Top 100 U.S. Oil and Gas Fields

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)Decade Year-0Proved Reserves (BillionProduction(MillionGrossJarrett WhistanceTop

  9. Dateline Los Alamos: Top Science News for 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HAB Packet HanfordDOEDaniel Shechtman andDarkIDDatabasesMake ItTop

  10. Top Open Data per Category | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop Inc JumpHeterInformation PolicyTinna Group JumpTombigbeeTononTop Open Data per

  11. Top Solar Technology Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop Inc JumpHeterInformation PolicyTinna Group JumpTombigbeeTononTop Open Data

  12. Top of Iowa II Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EISTJThin Film Solar TechnologiesCFR 1201EnergyInformation ToolsTopII

  13. The Top Quark, Its Discovery, and Subsequent Research

    Office of Scientific and Technical Information (OSTI)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministrationTechnicalTechnical InformationFrequentlyEnergy,|THEThe Top Quark,

  14. ITP's Top Low- or No-Cost Improvements

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancingR Walls21,Equipment:Petroleum Refining IndustryofITP's Top

  15. Westinghouse earns top award from quality new mexico

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking WithTelecentricNCubic Feet)Completes its AP1000®EddyTRUEarns Top

  16. EM's Top Official Underscores Commitment to Meet with Tribes | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based|DepartmentStatementof EnergyQuality'Lean' System |Oakof Energy Top

  17. Top 3 Takeaways from the Deputy Energy Secretary's Beijing Speech |

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OF APPLICABLEStatutory Authority J-I-12TiffanyEnergy Today:ofTop 11

  18. Loss of top soil due to any of these situations has both short and long-term effects. The top soil is the

    E-Print Network [OSTI]

    Duffy, Michael D.

    Loss of top soil due to any of these situations has both short and long-term effects. The top soil practices that can be implemented by a landlord to protect and conserve assets. Soil erosion is not the only the possible impact of rented land on soil conservation. Concerns regarding conservation practices are not new

  19. Measurement of Top Quark Polarization in Top-Antitop Events from Proton-Proton Collisions at ?s = 7 TeV Using the ATLAS Detector

    E-Print Network [OSTI]

    Taylor, Frank E.

    This Letter presents measurements of the polarization of the top quark in top-antitop quark pair events, using 4.7??fb[superscript ?1] of proton-proton collision data recorded with the ATLAS detector at the Large Hadron ...

  20. Measurement of the mass difference between top and anti-top quarks in pp collisions at ?s = 7 TeV using the ATLAS detector

    E-Print Network [OSTI]

    Taylor, Frank E.

    A measurement of the mass difference between top and anti-top quarks is presented. In a 4.7 fb[superscript ?1] data sample of proton–proton collisions at ?s = 7 TeV recorded with the ATLAS detector at the LHC, events ...